DESIGN PACKAGE 1D SYSTEM SAFETY ANALYSIS
L.R. Eisler
1995-02-02
The purpose of this analysis is to systematically identify and evaluate hazards related to the Yucca Mountain Project Exploratory Studies Facility (ESF) Design Package 1D, Surface Facilities, (for a list of design items included in the package 1D system safety analysis see section 3). This process is an integral part of the systems engineering process; whereby safety is considered during planning, design, testing, and construction. A largely qualitative approach was used since a radiological System Safety analysis is not required. The risk assessment in this analysis characterizes the accident scenarios associated with the Design Package 1D structures/systems/components in terms of relative risk and includes recommendations for mitigating all identified risks. The priority for recommending and implementing mitigation control features is: (1) Incorporate measures to reduce risks and hazards into the structure/system/component (S/S/C) design, (2) add safety devices and capabilities to the designs that reduce risk, (3) provide devices that detect and warn personnel of hazardous conditions, and (4) develop procedures and conduct training to increase worker awareness of potential hazards, on methods to reduce exposure to hazards, and on the actions required to avoid accidents or correct hazardous conditions. The scope of this analysis is limited to the Design Package 1D structures/systems/components (S/S/Cs) during normal operations excluding hazards occurring during maintenance and ''off normal'' operations.
NASA Astrophysics Data System (ADS)
Paroni, Roberto; Sili, Ali
2016-02-01
We first consider an elastic thin heterogeneous cylinder of radius of order ε: the interior of the cylinder is occupied by a stiff material (fiber) that is surrounded by a soft material (matrix). By assuming that the elasticity tensor of the fiber does not scale with ε and that of the matrix scales with ε2, we prove that the one dimensional model is a nonlocal system. We then consider a reference configuration domain filled out by periodically distributed rods similar to those described above. We prove that the homogenized model is a second order nonlocal problem. In particular, we show that the homogenization problem is directly connected to the 3D-1D dimensional reduction problem.
Turing Instabilities in Homogeneous Systems
NASA Astrophysics Data System (ADS)
Méndez, Vicenç; Fedotov, Sergei; Horsthemke, Werner
Alan Turing's paper entitled "The Chemical Basis of Morphogenesis" [440] ranks without doubt among the most important papers of the last century. In that seminal work Turing laid the foundation for the theory of chemical pattern formation. Turing showed that diffusion can have nontrivial effects in nonequilibrium systems. The interplay of diffusion with nonlinear kinetics can destabilize the uniform steady state of reaction-diffusion systems and generate stable, stationary concentration patterns.
Homogenization of Periodic Systems with Large Potentials
NASA Astrophysics Data System (ADS)
Allaire, Grégoire; Capdeboscq, Yves; Piatnitski, Andrey; Siess, Vincent; Vanninathan, M.
2004-11-01
We consider the homogenization of a system of second-order equations with a large potential in a periodic medium. Denoting by ɛ the period, the potential is scaled as ɛ-2. Under a generic assumption on the spectral properties of the associated cell problem, we prove that the solution can be approximately factorized as the product of a fast oscillating cell eigenfunction and of a slowly varying solution of a scalar second-order equation. This result applies to various types of equations such as parabolic, hyperbolic or eigenvalue problems, as well as fourth-order plate equation. We also prove that, for well-prepared initial data concentrating at the bottom of a Bloch band, the resulting homogenized tensor depends on the chosen Bloch band. Our method is based on a combination of classical homogenization techniques (two-scale convergence and suitable oscillating test functions) and of Bloch waves decomposition.
Homogeneous system UTBLI for 1964 - 1986.
NASA Astrophysics Data System (ADS)
Jovanović, B.; Durović, L.; Jovanović, M.
1993-09-01
Homogeneous results of universal time determinations derived from the observations by the Transit Instrument of Belgrade Astronomical Observatory (BLI) for the interval 1964 - 1986 are presented. They were prepared in accordance with IERS standards and listed in a table. In addition, using the smoothed values of monthly averaged UT1BLI-UT1BIH, an analysis on the variation of the local system UT1BLI is carried out, and also, systematic deviations after the adopted BIH model are shown. Undoubtedly, there exists a significant 11 - 14 year periodic change of UT1BLI system.
Nearsightedness of Finite Homogeneous Model Systems
NASA Astrophysics Data System (ADS)
Mitsuta, Yuki; Yamanaka, Shusuke; Kawakami, Takashi; Okumura, Mitsutaka; Yamaguchi, Kizashi; Nakamura, Haruki
On the basis of linear response function (LRF) analysis, nearsightedness of finite systems is examined for nearly homogeneous molecular systems. We first treated with Hn (n = 2-100) to inspect the local or nonlocal responses of these systems, which are, in other words, the magnitudes of nearsightedness of the finite systems. Further, the LRFs of H100n+ (n = 0-98) have been examined in order to clarify whether the magnitude of nearsightedness depends either the size of systems or the number of electrons in systems. From our calculations, we conjectured that the number of electrons are essential for nearsightedness of electronic matter (NEM) of this type of systems. This conjecture has been confirmed from the fact that the LRFs of H100n+ (n = 0-98) are similar to those of N electrons (N = 2-100) in a square well potential, showing that attractive potentials of H100n+ (n = 0-98) do not change significantly the dependence of the magnitudes of NEM on the number of electrons.
Multiple-state quantum Otto engine, 1D box system
Latifah, E.; Purwanto, A.
2014-03-24
Quantum heat engines produce work using quantum matter as their working substance. We studied adiabatic and isochoric processes and defined the general force according to quantum system. The processes and general force are used to evaluate a quantum Otto engine based on multiple-state of one dimensional box system and calculate the efficiency. As a result, the efficiency depends on the ratio of initial and final width of system under adiabatic processes.
Study of spin-polaron formation in 1D systems
Arredondo, Y.; Navarro, O.; Vallejo, E.
2014-05-15
We study numerically the formation of spin-polarons in low-dimensional systems. We consider a ferromagnetic Kondo lattice model with Hund coupling J{sub H} and localized spins interacting antiferromagnetically with coupling constant J. We investigate the ground state phase diagram as a function of the exchange couplings J{sub H} and J and as a function of the band filling, since it has been observed that doping either on the ferromagnetic or antiferromagnetic regime lead to formation of magnetic domains [1]. We explore the quasi-particle formation and phase separation using the density-matrix renormalization group method, which is a highly efficient method to investigate quasi-one-dimensional strongly correlated systems.
Particle simulation of bounded 1D plasma systems
Lawson, W.S.
1989-02-01
The physical and numerical problems of kinetic simulation of a bounded electrostatic plasma system in one planar dimension are examined, and solutions to them are presented. These problems include particle absorption, reflection and emission at boundaries, the solution of Poisson's equation under non-periodic boundary conditions, and the treatment of an external circuit connecting the boundaries. The methods which are described here are implemented in a code named PDW1, which is available from Professor C. K. Birdsall, Plasma Theory and Simulation Group, Cory Hall, University of California, Berkeley, CA 94720. copyright 1989 Academic Press, Inc.
Partical Simulation of Bounded 1D Plasma Systems
NASA Astrophysics Data System (ADS)
Lawson, William S.
1989-02-01
The physical and numerical problems of kinetic simulation of a bounded electrostatic plasma system in one planar dimension are examined, and solutions to them are presented. These problems include particle absorption, reflection and emission at boundaries, the solution of Poisson's equation under non-periodic boundary conditions, and the treatment of an external circuit connecting the boundaries. The methods which are described here are immlemented in a code named PDW1, which is available from Professor C. K. Birdsall, Plasma Theory and Simulation Group, Cory Hall, University of California, Berkeley, CA 94720.
Carbon-atom wires: 1-D systems with tunable properties
NASA Astrophysics Data System (ADS)
Casari, C. S.; Tommasini, M.; Tykwinski, R. R.; Milani, A.
2016-02-01
This review provides a discussion of the current state of research on linear carbon structures and related materials based on sp-hybridization of carbon atoms (polyynes and cumulenes). We show that such systems have widely tunable properties and thus represent an intriguing and mostly unexplored field for both fundamental and applied sciences. We discuss the rich interplay between the structural, vibrational, and electronic properties focusing on recent advances and the future perspectives of carbon-atom wires and novel hybrid sp-sp2-carbon architectures.
Carbon-atom wires: 1-D systems with tunable properties.
Casari, C S; Tommasini, M; Tykwinski, R R; Milani, A
2016-02-28
This review provides a discussion of the current state of research on linear carbon structures and related materials based on sp-hybridization of carbon atoms (polyynes and cumulenes). We show that such systems have widely tunable properties and thus represent an intriguing and mostly unexplored field for both fundamental and applied sciences. We discuss the rich interplay between the structural, vibrational, and electronic properties focusing on recent advances and the future perspectives of carbon-atom wires and novel hybrid sp-sp(2)-carbon architectures. PMID:26847474
Electronic-to-vibrational energy transfer efficiency in the O/1 D/-N2 and O/1 D/-CO systems
NASA Technical Reports Server (NTRS)
Slanger, T. G.; Black, G.
1974-01-01
With the aid of a molecular resonance fluorescence technique, which utilizes optical pumping from the v = 1 level of the ground state of CO by A 1 Pi-X 1 Sigma radiation, a study is made of the efficiency of E-V transfer from O(1 D) to CO. O(1 D) is generated at a known rate by O2 photodissociation at 1470 A in an intermittent mode, and the small modulation of the fluorescent signal associated with CO (v = 1) above the normal thermal background is interpreted in terms of E-V transfer efficiency. The CO (v = 1) lifetime in this system is determined mainly by resonance trapping of the IR fundamental band, and is found to be up to ten times longer than the natural radiative lifetime. For CO, (40 plus or minus 8)% of the O(1 D) energy is converted into vibrational energy. By observing the effect of N2 on the CO (v = 1) fluorescent intensity and lifetime, it is possible to obtain the E-V transfer efficiency for the system O(1 D)-N2 relative to that for O(1 D)-CO. The results indicate that the efficiency for N2 is (83 plus or minus 10)% of that for CO.
Holographic memory system based on projection recording of computer-generated 1D Fourier holograms.
Betin, A Yu; Bobrinev, V I; Donchenko, S S; Odinokov, S B; Evtikhiev, N N; Starikov, R S; Starikov, S N; Zlokazov, E Yu
2014-10-01
Utilization of computer generation of holographic structures significantly simplifies the optical scheme that is used to record the microholograms in a holographic memory record system. Also digital holographic synthesis allows to account the nonlinear errors of the record system to improve the microholograms quality. The multiplexed record of holograms is a widespread technique to increase the data record density. In this article we represent the holographic memory system based on digital synthesis of amplitude one-dimensional (1D) Fourier transform holograms and the multiplexed record of these holograms onto the holographic carrier using optical projection scheme. 1D Fourier transform holograms are very sensitive to orientation of the anamorphic optical element (cylindrical lens) that is required for encoded data object reconstruction. The multiplex record of several holograms with different orientation in an optical projection scheme allowed reconstruction of the data object from each hologram by rotating the cylindrical lens on the corresponding angle. Also, we discuss two optical schemes for the recorded holograms readout: a full-page readout system and line-by-line readout system. We consider the benefits of both systems and present the results of experimental modeling of 1D Fourier holograms nonmultiplex and multiplex record and reconstruction. PMID:25322249
Variational wave functions for homogenous Bose systems
Sueto, Andras; Szepfalusy, Peter
2008-02-15
We study variational wave functions of the product form, factorizing according to the wave vectors k, for the ground state of a system of bosons interacting via positive pair interactions with a positive Fourier transform. Our trial functions are members of different orthonormal bases in Fock space. Each basis contains a quasiparticle vacuum state and states with an arbitrary finite number of quasiparticles. One of the bases is that of Valatin and Butler (VB), introduced fifty years ago and parametrized by an infinite set of variables determining Bogoliubov's canonical transformation for each k. In another case, inspired by Nozieres and Saint James the canonical transformation for k=0 is replaced by a shift in the creation/annihilation operators. For the VB basis we prove that the lowest energy is obtained in a state with {approx}{radical}(volume) quasiparticles in the zero mode. The number of k=0 physical particles is of the order of the volume and its fluctuation is anomalously large, resulting in an excess energy. The same fluctuation is normal in the second type of optimized bases, the minimum energy is smaller and is attained in a vacuum state. Associated quasiparticle theories and questions about the gap in their spectrum are also discussed.
Neutronic analysis of the 1D and 1E banks reflux detection system
Blanchard, A.
1999-12-21
Two H Canyon neutron monitoring systems for early detection of postulated abnormal reflux conditions in the Second Uranium Cycle 1E and 1D Mixer-Settle Banks have been designed and built. Monte Carlo neutron transport simulations using the general purpose, general geometry, n-particle MCNP code have been performed to model expected response of the monitoring systems to varying conditions.The confirmatory studies documented herein conclude that the 1E and 1D neutron monitoring systems are able to achieve adequate neutron count rates for various neutron source and detector configurations, thereby eliminating excessive integration count time. Neutron count rate sensitivity studies are also performed. Conversely, the transport studies concluded that the neutron count rates are statistically insensitive to nitric acid content in the aqueous region and to the transition region length. These studies conclude that the 1E and 1D neutron monitoring systems are able to predict the postulated reflux conditions for all examined perturbations in the neutron source and detector configurations. In the cases examined, the relative change in the neutron count rates due to postulated transitions from normal {sup 235}U concentration levels to reflux levels remain satisfactory detectable.
Microstates of the D1-D5-Kaluza-Klein monopole system
Bena, Iosif; Kraus, Per
2005-07-15
We find supergravity solutions corresponding to all U(1)xU(1) invariant chiral primaries of the D1-D5-KK system. These solutions are 1/8 BPS, carry angular momentum, and are asymptotically flat in the 3+1 dimensional sense. They can be thought of as representing the ground states of the four-dimensional black hole constructed from the D1-D5-KK-P system. Demanding the absence of unphysical singularities in our solutions determines all free parameters, and gives precise agreement with the quantum numbers expected from the CFT point of view. The physical mechanism behind the smoothness of the solutions is that the D1 branes and D5 branes expand into a KK-monopole supertube in the transverse space of the original KK monopole.
Resonance Raman Spectroscopy of Extreme Nanowires and Other 1D Systems
Smith, David C.; Spencer, Joseph H.; Sloan, Jeremy; McDonnell, Liam P.; Trewhitt, Harrison; Kashtiban, Reza J.; Faulques, Eric
2016-01-01
This paper briefly describes how nanowires with diameters corresponding to 1 to 5 atoms can be produced by melting a range of inorganic solids in the presence of carbon nanotubes. These nanowires are extreme in the sense that they are the limit of miniaturization of nanowires and their behavior is not always a simple extrapolation of the behavior of larger nanowires as their diameter decreases. The paper then describes the methods required to obtain Raman spectra from extreme nanowires and the fact that due to the van Hove singularities that 1D systems exhibit in their optical density of states, that determining the correct choice of photon excitation energy is critical. It describes the techniques required to determine the photon energy dependence of the resonances observed in Raman spectroscopy of 1D systems and in particular how to obtain measurements of Raman cross-sections with better than 8% noise and measure the variation in the resonance as a function of sample temperature. The paper describes the importance of ensuring that the Raman scattering is linearly proportional to the intensity of the laser excitation intensity. It also describes how to use the polarization dependence of the Raman scattering to separate Raman scattering of the encapsulated 1D systems from those of other extraneous components in any sample. PMID:27168195
Resonance Raman Spectroscopy of Extreme Nanowires and Other 1D Systems.
Smith, David C; Spencer, Joseph H; Sloan, Jeremy; McDonnell, Liam P; Trewhitt, Harrison; Kashtiban, Reza J; Faulques, Eric
2016-01-01
This paper briefly describes how nanowires with diameters corresponding to 1 to 5 atoms can be produced by melting a range of inorganic solids in the presence of carbon nanotubes. These nanowires are extreme in the sense that they are the limit of miniaturization of nanowires and their behavior is not always a simple extrapolation of the behavior of larger nanowires as their diameter decreases. The paper then describes the methods required to obtain Raman spectra from extreme nanowires and the fact that due to the van Hove singularities that 1D systems exhibit in their optical density of states, that determining the correct choice of photon excitation energy is critical. It describes the techniques required to determine the photon energy dependence of the resonances observed in Raman spectroscopy of 1D systems and in particular how to obtain measurements of Raman cross-sections with better than 8% noise and measure the variation in the resonance as a function of sample temperature. The paper describes the importance of ensuring that the Raman scattering is linearly proportional to the intensity of the laser excitation intensity. It also describes how to use the polarization dependence of the Raman scattering to separate Raman scattering of the encapsulated 1D systems from those of other extraneous components in any sample. PMID:27168195
On the Atkinson-Johnson Homogeneous Solution for Infinite Systems
NASA Astrophysics Data System (ADS)
Laraudogoitia, Jon Pérez
2015-05-01
This paper shows that the general homogeneous solution to equations of evolution for some infinite systems of particles subject to mutual binary collisions does not depend on a single arbitrary constant but on a potentially infinite number of such constants. This is because, as I demonstrate, a single self-excitation of a system of particles can depend on a potentially infinite number of parameters. The recent homogeneous solution obtained by Atkinson and Johnson, which depends on a single arbitrary constant, is only a particular case.
Supersymmetric configurations in the rotating D1-D5 system andpp-waves
NASA Astrophysics Data System (ADS)
Maoz, Liat
Two families of supersymmetric configurations are considered. One is the 1/4 supersymmetric D1--D5 system with angular momentum, and the other is a family of pp-waves of type IIB string theory with some supersymmetry. In the first part of the thesis some configurations of the D1--D5 system are examined which give conical singularities in AdS 3 as their near horizon limit. It is shown that they can be made non-singular by adding angular momentum to the brane system. The smooth asymptotically flat solutions constructed this way are used to obtain global AdS 3 as the near horizon geometry. Using the relation of the D1--D5 system to the oscillating string, a large family of supergravity solutions is constructed which describe BPS excitations on AdS3 x S 3 with angular momentum on S3. These solutions take into account the full back reaction on the metric, and can be viewed as Kaluza-Klein monopole "supertubes", which are completely non-singular geometries. The different chiral primaries of the dual CFT are identified with these different supergravity solutions. This part is adapted from the papers [1], [2]. In its second part, a general class of supersymmetric pp-wave solutions of type IIB string theory is constructed, such that the superstring worldsheet action in light cone gauge is that of an interacting massive field theory. It is shown that when the light cone Lagrangian has (2.2) supersymmetry, one can find backgrounds that lead to arbitrary superpotentials on the worldsheet. Both flat and curved transverse spaces are considered. In particular, the background giving rise to the N = 2 sine Gordon theory on the worldsheet is analyzed. Massive mirror symmetry relates it to the deformed CP1 model (or sausage model) which seems to elude a purely supergravity target space interpretation. These are results which appeared in the paper [3].
NASA Astrophysics Data System (ADS)
Saber, Mohamed R.; Abu-Youssef, Morsy A. M.; Goher, Mohamed A. S.; Sabra, Berry A.; Hafez, Afaf K.; Badr, Ahmed M.-A.; Mautner, Franz A.
2012-01-01
Three new cadmium(II) thiocyanato complexes, [{Cd(NCS) 2(val)}·H 2O] n1, [Cd(NCS) 2(3-ampy) 2] n2, and [Cd(NCS) 2(pyrazolinone)] n3, (val = D, L-valine, 3-ampy = 3-aminopyridine and pyrazolinone = 3-methyl-1-phenyl-2-pyrazolin-5-one) have been synthesized and structurally characterized. The X-ray structure analysis revealed di-μ-N,S thiocyanato bridges connecting cadmium centers in a 1D chain with the co-ligand blocking the remaining coordination sites. The structure of complex 1 features six coordinate Cd(II) centers, each cadmium is surrounded by two N atoms and two S atoms from two bridging N,S-thiocyanato groups giving rise to a zigzag 1D chain and two oxygen atoms of the alternating chelating μ-O,O'-valine that coordinates as zwitterionic terminal amino acid. The structure of complex 2 consists of octahedral Cd(II) centers, connected by di-μ-N,S-bridging NCS groups, thus forming a 1D chain system along the [1 0 1] direction. The amino-groups are forming one intra-chain N sbnd H⋯N hydrogen bond and one interchain N sbnd H⋯N hydrogen bond to N-atoms of adjacent chains. The structure of 3 reveals di-μ-N,S-NCS doubly bridged unusual penta-coordinated cadmium centers with the alternating monodentate pyrazolinone ligand blocking the fifth coordination site. IR spectra and thermal properties of complexes are reported.
Review of Zero-D and 1-D Models of Blood Flow in the Cardiovascular System
2011-01-01
Background Zero-dimensional (lumped parameter) and one dimensional models, based on simplified representations of the components of the cardiovascular system, can contribute strongly to our understanding of circulatory physiology. Zero-D models provide a concise way to evaluate the haemodynamic interactions among the cardiovascular organs, whilst one-D (distributed parameter) models add the facility to represent efficiently the effects of pulse wave transmission in the arterial network at greatly reduced computational expense compared to higher dimensional computational fluid dynamics studies. There is extensive literature on both types of models. Method and Results The purpose of this review article is to summarise published 0D and 1D models of the cardiovascular system, to explore their limitations and range of application, and to provide an indication of the physiological phenomena that can be included in these representations. The review on 0D models collects together in one place a description of the range of models that have been used to describe the various characteristics of cardiovascular response, together with the factors that influence it. Such models generally feature the major components of the system, such as the heart, the heart valves and the vasculature. The models are categorised in terms of the features of the system that they are able to represent, their complexity and range of application: representations of effects including pressure-dependent vessel properties, interaction between the heart chambers, neuro-regulation and auto-regulation are explored. The examination on 1D models covers various methods for the assembly, discretisation and solution of the governing equations, in conjunction with a report of the definition and treatment of boundary conditions. Increasingly, 0D and 1D models are used in multi-scale models, in which their primary role is to provide boundary conditions for sophisticate, and often patient-specific, 2D and 3D models
Exact spin dynamics of inhomogeneous 1-d systems at high temperature
NASA Astrophysics Data System (ADS)
Danieli, E. P.; Pastawski, H. M.; Levstein, P. R.
2002-07-01
The evaluation of spin excitation dynamics in finite 1-d systems of spins {1}/{2} with XY exchange interaction J acquired new interest because NMR experiments at high temperature ( kBT≫ J) confirmed the predicted spin wave behavior of mesoscopic echoes. In this work, we use the Jordan-Wigner transformation to obtain the exact dynamics of inhomogeneous chains and rings where the evolution is reduced to one-body dynamics. For higher dimensions, the spin excitations manifest many-body effects that can be interpreted as a simple dynamics of non-interacting fermions plus a decoherent process.
Hao, Qing-Yi; Jiang, Rui; Hu, Mao-Bin; Jia, Bin; Wang, Wen-Xu
2016-01-01
Driven diffusive systems have been a paradigm for modelling many physical, chemical, and biological transport processes. In the systems, spatial correlation plays an important role in the emergence of a variety of nonequilibrium phenomena and exhibits rich features such as pronounced oscillations. However, the lack of analytical results of spatial correlation precludes us from fully understanding the effect of spatial correlation on the dynamics of the system. Here we offer precise analytical predictions of the spatial correlation in a typical driven diffusive system, namely facilitated asymmetric exclusion process. We find theoretically that the correlation between two sites decays exponentially as their distance increases, which is in good agreement with numerical simulations. Furthermore, we find the exponential decay is a universal property of macroscopic homogeneous state in a broad class of 1D driven diffusive systems. Our findings deepen the understanding of many nonequilibrium phenomena resulting from spatial correlation in driven diffusive systems. PMID:26804770
Statistical investigation and thermal properties for a 1-D impact system with dissipation
NASA Astrophysics Data System (ADS)
Díaz I., Gabriel; Livorati, André L. P.; Leonel, Edson D.
2016-05-01
The behavior of the average velocity, its deviation and average squared velocity are characterized using three techniques for a 1-D dissipative impact system. The system - a particle, or an ensemble of non-interacting particles, moving in a constant gravitation field and colliding with a varying platform - is described by a nonlinear mapping. The average squared velocity allows to describe the temperature for an ensemble of particles as a function of the parameters using: (i) straightforward numerical simulations; (ii) analytically from the dynamical equations; (iii) using the probability distribution function. Comparing analytical and numerical results for the three techniques, one can check the robustness of the developed formalism, where we are able to estimate numerical values for the statistical variables, without doing extensive numerical simulations. Also, extension to other dynamical systems is immediate, including time dependent billiards.
Homogeneous UVA system for corneal cross-linking treatment
NASA Astrophysics Data System (ADS)
Ayres Pereira, Fernando R.; Stefani, Mario A.; Otoboni, José A.; Richter, Eduardo H.; Ventura, Liliane
2010-02-01
The treatment of keratoconus and corneal ulcers by collagen cross-linking using ultraviolet type A irradiation, combined with photo-sensitizer Riboflavin (vitamin B2), is a promising technique. The standard protocol suggests instilling Riboflavin in the pre-scratched cornea every 5min for 30min, during the UVA irradiation of the cornea at 3mW/cm2 for 30 min. This process leads to an increase of the biomechanical strength of the cornea, stopping the progression, or sometimes, even reversing Keratoconus. The collagen cross-linking can be achieved by many methods, but the utilization of UVA light, for this purpose, is ideal because of its possibility of a homogeneous treatment leading to an equal result along the treated area. We have developed a system, to be clinically used for treatment of unhealthy corneas using the cross-linking technique, which consists of an UVA emitting delivery device controlled by a closed loop system with high homogeneity. The system is tunable and delivers 3-5 mW/cm2, at 365nm, for three spots (6mm, 8mm and 10mm in diameter). The electronics close loop presents 1% of precision, leading to an overall error, after the calibration, of less than 10% and approximately 96% of homogeneity.
Strong and Weak 2D Topological Superconductivity in Hidden Quasi-1D Systems
NASA Astrophysics Data System (ADS)
Yang, Fan; Yao, Hong
2014-03-01
Partly motivated by the newly discovered family of bismuth-based superconductors including LaO1-xFxBiS2, we study possible 2D topological superconductivities (TSC) in hidden quasi-1D systems with spin-orbit couplings. By doing RPA calculations and renormalization group (RG) treatment, we theoretically find that in a large portion of the phase diagram with varying interaction strengths and spin-orbit coupling the ground states favors superconductivity with odd-parity pairing, which results in either chiral TSC or time reversal invariant weak-Z2 TSC. We shall discuss several ways to experimentally identify these strong and weak 2D topological superconductivity. Possible applications to the bismuth-based superconductors LaO1-xFxBiS2 will also be remarked.
Modelling hydrology of a single bioretention system with HYDRUS-1D.
Meng, Yingying; Wang, Huixiao; Chen, Jiangang; Zhang, Shuhan
2014-01-01
A study was carried out on the effectiveness of bioretention systems to abate stormwater using computer simulation. The hydrologic performance was simulated for two bioretention cells using HYDRUS-1D, and the simulation results were verified by field data of nearly four years. Using the validated model, the optimization of design parameters of rainfall return period, filter media depth and type, and surface area was discussed. And the annual hydrologic performance of bioretention systems was further analyzed under the optimized parameters. The study reveals that bioretention systems with underdrains and impervious boundaries do have some detention capability, while their total water retention capability is extremely limited. Better detention capability is noted for smaller rainfall events, deeper filter media, and design storms with a return period smaller than 2 years, and a cost-effective filter media depth is recommended in bioretention design. Better hydrologic effectiveness is achieved with a higher hydraulic conductivity and ratio of the bioretention surface area to the catchment area, and filter media whose conductivity is between the conductivity of loamy sand and sandy loam, and a surface area of 10% of the catchment area is recommended. In the long-term simulation, both infiltration volume and evapotranspiration are critical for the total rainfall treatment in bioretention systems. PMID:25133240
Modelling Hydrology of a Single Bioretention System with HYDRUS-1D
Meng, Yingying; Wang, Huixiao; Chen, Jiangang; Zhang, Shuhan
2014-01-01
A study was carried out on the effectiveness of bioretention systems to abate stormwater using computer simulation. The hydrologic performance was simulated for two bioretention cells using HYDRUS-1D, and the simulation results were verified by field data of nearly four years. Using the validated model, the optimization of design parameters of rainfall return period, filter media depth and type, and surface area was discussed. And the annual hydrologic performance of bioretention systems was further analyzed under the optimized parameters. The study reveals that bioretention systems with underdrains and impervious boundaries do have some detention capability, while their total water retention capability is extremely limited. Better detention capability is noted for smaller rainfall events, deeper filter media, and design storms with a return period smaller than 2 years, and a cost-effective filter media depth is recommended in bioretention design. Better hydrologic effectiveness is achieved with a higher hydraulic conductivity and ratio of the bioretention surface area to the catchment area, and filter media whose conductivity is between the conductivity of loamy sand and sandy loam, and a surface area of 10% of the catchment area is recommended. In the long-term simulation, both infiltration volume and evapotranspiration are critical for the total rainfall treatment in bioretention systems. PMID:25133240
A tiny gas-sensor system based on 1D photonic crystal
NASA Astrophysics Data System (ADS)
Bouzidi, A.; Bria, D.; Akjouj, A.; Pennec, Y.; Djafari-Rouhani, B.
2015-12-01
We present a gas monitoring system for detecting the gas concentration in ambient air. This sensor is based on a 1D photonic crystal formed by alternating layers of magnesium fluoride (MgF2) and silicon (Si) with an empty layer in the middle. The lamellar cavity (defect layer) will be filled with polluted air that has a refractive index close to that of pure air, varying between n 0 = 1.00 to n 0 = 1.01. The transmission spectrum of this sensor is calculated by the Green function approach. The numerical results show that the transmission peak, which appears in the gap, is caused by the infiltration of impure air into the empty middle layer. This transmission peak can be used for detection purposes in real-time environmental monitoring. The peak frequency is sensitive to the air-gas mixture, and a variation in the refractive index as small as Δn = 10-5 can be detected. A sensitivity, Δλ/Δn, of 700 nm per refractive index unit (RIU) is achieved with this sensor.
Using Homogenization Theory to Study Convection in Thermohaline Systems
NASA Astrophysics Data System (ADS)
Musuuza, J. L.; Radu, F. A.; Attinger, S.
2012-04-01
We study a density-driven system in which the density gradients arise from salinity and temperature differences. Since the solute and heat diffuse at different rates, such systems are also called double-diffusive and arise in many practical applications like carbon dioxide sequestration, geothermal energy exploitation and the storage of nuclear and normal waste in geological formations. A typical sedimentary-basin set-up is adopted where both salinity and temperature increase with depth. In such systems, the buoyancy forces caused by salinity and temperature gradients give rise to counter-acting convection cells. The homogenization theory ideas originally developed in Held et al. (2005) are applied to the solute and heat transport equations and the two resulting cell problems solved coupled. A dimensionless number is derived from the solutions to the cell problems in terms of the physical variables temperature, viscosity and density contrasts; gravity-driven velocity, domain size and formation hydro-geological properties. The sign of the number changes to negative when the thermal-convection predominates over solutal-convection. The derived dimensionless number is tested against numerical simulations performed with the software package d3 f on sufficiently refined grids that deliver stable numerical solutions without upwind techniques (Frolkovic and De Schepper, 2001). We also investigate the possibility of groundwater intrusion into a geological formation by applying a horizontal drift at the top of the domain. The evolution of fingers in haline density-driven systems was studied e.g. in Musuuza et al. (2009) and such a velocity aligned orthogonal to the direction of finger propagation was found to retard finger growth. Frolkovic, P. and De Schepper, H. (2001), 'Numerical modelling of convection dominated transport coupled with density-driven flow in porous media', Ad. Wat. Resour. 24, 63-72. Held, R, S. Attinger and Kinzelbach, W. (2005), 'Homogenization and
NASA Astrophysics Data System (ADS)
Wu, Hong; Li, Peng; Li, Yulong
2016-02-01
This paper describes the calculation method for unsteady state conditions in the secondary air systems in gas turbines. The 1D-3D-Structure coupled method was applied. A 1D code was used to model the standard components that have typical geometric characteristics. Their flow and heat transfer were described by empirical correlations based on experimental data or CFD calculations. A 3D code was used to model the non-standard components that cannot be described by typical geometric languages, while a finite element analysis was carried out to compute the structural deformation and heat conduction at certain important positions. These codes were coupled through their interfaces. Thus, the changes in heat transfer and structure and their interactions caused by exterior disturbances can be reflected. The results of the coupling method in an unsteady state showed an apparent deviation from the existing data, while the results in the steady state were highly consistent with the existing data. The difference in the results in the unsteady state was caused primarily by structural deformation that cannot be predicted by the 1D method. Thus, in order to obtain the unsteady state performance of a secondary air system more accurately and efficiently, the 1D-3D-Structure coupled method should be used.
Quantum propagation and confinement in 1D systems using the transfer-matrix method
NASA Astrophysics Data System (ADS)
Pujol, Olivier; Carles, Robert; Pérez, José-Philippe
2014-05-01
The aim of this article is to provide some Matlab scripts to the teaching community in quantum physics. The scripts are based on the transfer-matrix formalism and offer a very efficient and versatile tool to solve problems of a physical object (electron, proton, neutron, etc) with one-dimensional (1D) stationary potential energy. Resonant tunnelling through a multiple-barrier or confinement in wells of various shapes is particularly analysed. The results are quantitatively discussed with semiconductor heterostructures, harmonic and anharmonic molecular vibrations, or neutrons in a gravity field. Scripts and other examples (hydrogen-like ions and transmission by a smooth variation of potential energy) are available freely at http://www-loa.univ-lille1.fr/˜pujol in three languages: English, French and Spanish.
NASA Astrophysics Data System (ADS)
Açıkkalp, Emin; Caner, Necmettin
2015-04-01
In this paper, an irreversible quantum Diesel refrigerator for a 1D-box system is described and analyzed. The exergetic sustainability index that is the rate of the exergy output from the system to the total exergetic losses including exergy destruction and exergy loss from the system is applied for the first time to an irreversible quantum engine. Other thermodynamic parameters including work input, cooling load, exergy destruction, COP and exergy efficiency are investigated according to the cycle temperatures and numerical results are presented.
Disappearance of 2D Magnetic Character in Quasi-1D System CoNb2O6 under Magnetic Field
NASA Astrophysics Data System (ADS)
Mitsuda, Setsuo; Kobayashi, Satoru; Katagiri, Kouji; Yoshizawa, Hideki; Ishikawa, Masayasu; Miyatani, Kazuo; Kohn, Kay
1995-07-01
We report neutron scattering as well as ac susceptibility studies on the formation of magnetic ordering in a quasi-1D ferromagnetic chain system CoNb2O6 in magnetic fields up to 600 Oe. At T=1.5 K, a noncollinear ferrimagnetic (FR) phase with up-up-down spin arrangement along the b axis is field-induced in the magnetic field above ˜300 Oe. Interestingly, the pronounced 2D magnetic character previously found in the noncollinear antiferromagnetic phase disappears in the FR phase. This is direct evidence that the 2D magnetic character is due to the cancellation of interchain exchange fields at an apex site of a 2D isosceles-triangular lattice where quasi-1D ferromagnetic chains lie.
Gen Purpose 1-D Finite Element Network Fluid Flow Heat Transfer System Simulator
Energy Science and Technology Software Center (ESTSC)
1993-08-02
SAFSIM (System Analysis Flow Simulator) is a FORTRAN computer program to simulate the integrated performance of systems involving fluid mechanics, heat transfer, and reactor dynamics. SAFSIM provides sufficient versatility to allow the engineering simulation of almost any system, from a backyard sprinkler system to a clustered nuclear reactor propulsion system. In addition to versatility, speed and robustness are primary SAFSIM development goals. SAFSIM contains three basic physics modules: (1) a one-dimensional finite element fluid mechanicsmore » module with multiple flow network capability; (2) a one-dimensional finite element structure heat transfer module with multiple convection and radiation exchange capability; and (3) a point reactor dynamics module with reactivity feedback and decay heat capability. SAFSIM can be used for compressible and incompressible, single-phase, multicomponent flow systems.« less
National Geothermal Data System Hub Deployment Timeline (Appendix E-1-d)
Caudill, Christy
2015-12-20
Excel spreadsheet describing activity, spending, and development for the four data hubs (Arizona Geoloical Survey, Kentucky Geological Survey, Illinois Geological Survey, and Nevada Bureau of Mines and Geology) serving data for the National Geothermal Data System under the State Contributions to the National Geothermal Data System Project.
The research of 1D / 3D coupling simulation on pump and pipe system
NASA Astrophysics Data System (ADS)
Wu, D. Z.; Liu, Q. L.; Wu, P.; Wang, L. Q.; Paulus, T.; Wang, B. G.; Oesterle, M.
2012-11-01
The research of performances of hydraulic mechanical depends on static complete characteristic curves, which have great difference compared with the actual work condition and have accidents potential. So we need a new way to compute the dynamic system, which is more reasonable. So the method to couple one dimensional simulation and three dimensional CFD analysis based on Flowmaster and Fluent is explored, and the dynamic characteristics and internal flow of the pumping system are analyzed. First, a pipe system model is created in Flowmaster and a pump model is created in Fluent; then VB code and scheme code are used to realize the automated operation for Flowmaster and Fluent; at last, the exchange of data between these two parts is realized by an interface program. In this paper, the interaction between pumps and pipe system are analyzed by coupling one-dimensional and three-dimensional simulations. This study would be helpful to identify the influences of the rapid adjustment process on stability of system and provide guides for design of pump system.
Vlasov-Poisson in 1D for initially cold systems: post-collapse Lagrangian perturbation theory
NASA Astrophysics Data System (ADS)
Colombi, Stéphane
2015-01-01
We study analytically the collapse of an initially smooth, cold, self-gravitating collisionless system in one dimension. The system is described as a central 'S' shape in phase-space surrounded by a nearly stationary halo acting locally like a harmonic background on the S. To resolve the dynamics of the S under its self-gravity and under the influence of the halo, we introduce a novel approach using post-collapse Lagrangian perturbation theory. This approach allows us to follow the evolution of the system between successive crossing times and to describe in an iterative way the interplay between the central S and the halo. Our theoretical predictions are checked against measurements in entropy conserving numerical simulations based on the waterbag method. While our post-collapse Lagrangian approach does not allow us to compute rigorously the long-term behaviour of the system, i.e. after many crossing times, it explains the close to power-law behaviour of the projected density observed in numerical simulations. Pushing the model at late time suggests that the system could build at some point a very small flat core, but this is very speculative. This analysis shows that understanding the dynamics of initially cold systems requires a fine-grained approach for a correct description of their very central part. The analyses performed here can certainly be extended to spherical symmetry.
Multiparticle systems in κ -Poincaré inspired by (2 +1 )D gravity
NASA Astrophysics Data System (ADS)
Kowalski-Glikman, Jerzy; Rosati, Giacomo
2015-04-01
Inspired by a Chern-Simons description of 2 +1 -dimensional gravity coupled to point particles we propose a new Lagrangian of a multiparticle system living in κ -Minkowski/κ -Poincaré spacetime. We derive the dynamics of interacting particles with κ -momentum space, alternative to the one proposed in the "principle of relative locality" literature. The model that we obtain takes account of the nonlocal topological interactions between the particles, so that the effective multiparticle action is not a sum of their free actions. In this construction the locality of particle processes is naturally implemented, even for distant observers. In particular a particle process is characterized by a local deformed energy-momentum conservation law. The spacetime transformations are generated by total charges/generators for the composite particle system, and leave unaffected the locality of individual particle processes.
YAMAZAKI, Toshimitsu; AKAISHI, Yoshinori; HASSANVAND, Maryam
2011-01-01
A recent successful observation of a dense and deeply bound 𝐾̄ nuclear system, K−pp, in the p + p → K+ + K−pp reaction in a DISTO experiment indicates that the double-𝐾̄ dibaryon, K−K−pp, which was predicted to be a dense nuclear system, can also be formed in p + p collisions. We find theoretically that the K−-K− repulsion plays no significant role in reducing the density and binding energy of K−K−pp and that, when two Λ(1405) resonances are produced simultaneously in a short-range p + p collision, they act as doorways to copious formation of K−K−pp, if and only if K−K−pp is a dense object, as predicted. PMID:21670568
1D momentum-conserving systems: the conundrum of anomalous versus normal heat transport
NASA Astrophysics Data System (ADS)
Li, Yunyun; Liu, Sha; Li, Nianbei; Hänggi, Peter; Li, Baowen
2015-04-01
Transport and the spread of heat in Hamiltonian one dimensional momentum conserving nonlinear systems is commonly thought to proceed anomalously. Notable exceptions, however, do exist of which the coupled rotator model is a prominent case. Therefore, the quest arises to identify the origin of manifest anomalous energy and momentum transport in those low dimensional systems. We develop the theory for both, the statistical densities for momentum- and energy-spread and particularly its momentum-/heat-diffusion behavior, as well as its corresponding momentum/heat transport features. We demonstrate that the second temporal derivative of the mean squared deviation of the momentum spread is proportional to the equilibrium correlation of the total momentum flux. Subtracting the part which corresponds to a ballistic momentum spread relates (via this integrated, subleading momentum flux correlation) to an effective viscosity, or equivalently, to the underlying momentum diffusivity. We next put forward the intriguing hypothesis: normal spread of this so adjusted excess momentum density causes normal energy spread and alike normal heat transport (Fourier Law). Its corollary being that an anomalous, superdiffusive broadening of this adjusted excess momentum density in turn implies an anomalous energy spread and correspondingly anomalous, superdiffusive heat transport. This hypothesis is successfully corroborated within extensive molecular dynamics simulations over large extended time scales. Our numerical validation of the hypothesis involves four distinct archetype classes of nonlinear pair-interaction potentials: (i) a globally bounded pair interaction (the noted coupled rotator model), (ii) unbounded interactions acting at large distances (the coupled rotator model amended with harmonic pair interactions), (iii) the case of a hard point gas with unbounded square-well interactions and (iv) a pair interaction potential being unbounded at short distances while displaying an
Calibration of photometric systems from homogeneous spectrophotometric data.
NASA Astrophysics Data System (ADS)
Labhardt, L.; Buser, R.
The atlas of stellar spectrophotometric data published by Gunn and Stryker (1983) constitutes an extremely valuable tool for the evaluation and calibration of photometric systems. Since RGU photometry is tightly linked to UBV data the Gunn-Stryker atlas has been used in the present paper to evaluate these two systems and subsequently investigate the resulting calibration of the RGU colors in terms of MK spectral classification.
Method and system for homogenizing diode laser pump arrays
Bayramian, Andy J
2013-10-01
An optical amplifier system includes a diode pump array including a plurality of semiconductor diode laser bars disposed in an array configuration and characterized by a periodic distance between adjacent semiconductor diode laser bars. The periodic distance is measured in a first direction perpendicular to each of the plurality of semiconductor diode laser bars. The diode pump array provides a pump output propagating along an optical path and characterized by a first intensity profile measured as a function of the first direction and having a variation greater than 10%. The optical amplifier system also includes a diffractive optic disposed along the optical path. The diffractive optic includes a photo-thermo-refractive glass member. The optical amplifier system further includes an amplifier slab having an input face and position along the optical path and separated from the diffractive optic by a predetermined distance. A second intensity profile measured at the input face of the amplifier slab as a function of the first direction has a variation less than 10%.
Method and system for homogenizing diode laser pump arrays
Bayramian, Andrew James
2016-05-03
An optical amplifier system includes a diode pump array including a plurality of semiconductor diode laser bars disposed in an array configuration and characterized by a periodic distance between adjacent semiconductor diode laser bars. The periodic distance is measured in a first direction perpendicular to each of the plurality of semiconductor diode laser bars. The diode pump array provides a pump output propagating along an optical path and characterized by a first intensity profile measured as a function of the first direction and having a variation greater than 10%. The optical amplifier system also includes a diffractive optic disposed along the optical path. The diffractive optic includes a photo-thermo-refractive glass member. The optical amplifier system further includes an amplifier slab having an input face and position along the optical path and separated from the diffractive optic by a predetermined distance. A second intensity profile measured at the input face of the amplifier slab as a function of the first direction has a variation less than 10%.
Zhang, Chunfang; Fu, Mingkai; Shen, Zhitao; Ma, Haitao; Bian, Wensheng
2014-06-21
A new global ab initio potential energy surface (called ZMB-a) for the 1(1)A' state of the C((1)D)+H2 reactive system has been constructed. This is based upon ab initio calculations using the internally contracted multireference configuration interaction approach with the aug-cc-pVQZ basis set, performed at about 6300 symmetry unique geometries. Accurate analytical fits are generated using many-body expansions with the permutationally invariant polynomials, except that the fit of the deep well region is taken from our previous fit. The ZMB-a surface is unique in the accurate description of the regions around conical intersections (CIs) and of van der Waals (vdW) interactions. The CIs between the 1(1)A' and 2(1)A' states cause two kinds of barriers on the ZMB-a surface: one is in the linear H-CH dissociation direction with a barrier height of 9.07 kcal/mol, which is much higher than those on the surfaces reported before; the other is in the C((1)D) collinearly attacking H2 direction with a barrier height of 12.39 kcal/mol. The ZMB-a surface basically reproduces our ab initio calculations in the vdW interaction regions, and supports a linear C-HH vdW complex in the entrance channel, and two vdW complexes in the exit channel, at linear CH-H and HC-H geometries, respectively. PMID:24952535
Reynolds Pressure and Relaxation in a Homogeneous Sheared Granular System
NASA Astrophysics Data System (ADS)
Ren, Jie; Dijksman, Joshua; Behringer, Robert
2012-11-01
We describe experiments on the constitutive behavior of a system composed of a disordered collection of frictional disks. We use a novel shear apparatus that avoids the formation of inhomogeneities known as shear bands. We probe the evolution of shear jammed states, occurring for packing fractions φS <= φ <=φJ , where above φJ there are no stress-free static states, and below φS, all static states are stress-free. Our linearly sheared, fixed φ system exhibits coupling between the shear strain, γ, and the pressure, P, which we characterize by the ``Reynolds pressure,'' and a ``Reynolds coefficient,'' R (φ) = (∂2 P / ∂γ2) / 2 . R depends only on φ, and diverges as R ~(φc - φ)α , where φc ~=φJ , and α ~= - 3 . 3 . Moreover, by using asymmetric strain cycles, we find that the observed constitutive relations are limit cycles that are approached logarithmically slowly under cyclic shear. We characterize the relaxation in terms of the pressure asymmetry at cycle n: ΔP ~= - β ln (n /n0) . β depends only on the shear cycle amplitude, suggesting an activated process where β plays a temperature-like role. This work is supported by NSF grant DMR12-06351, NSF grant 0835742, and ARO grant W911NF-11-1-0110.
Homogeneous magnitude system of the Eurasian continent: S and L waves
NASA Astrophysics Data System (ADS)
Christoskov, L.; Kondorskaya, N. V.; Vanek, J.
1983-07-01
A research project was started by the Commission of Academies of Socialist Countries on Planetary Geophysics (KAPG) to establish a system of seismic reference stations of the Eurasian continent for determining reliable earthquake magnitudes. This system was called the Homogeneous Magnitude System (HMS), and seismologist of 13 institutions from Bulgaria, Czechoslovakia, German Democratic Republic, Poland, and the U.S.S.R. participated. The project was sponsored by the Commission on Practice of the International Association of Seismology and Physics of the Earth's Interior, which created a special working group for homogeneous magnitude system within its Subcommission on Magnitude.
NASA Astrophysics Data System (ADS)
Andersson, P.; Valldor-Blücher, J.; Andersson Sundén, E.; Sjöstrand, H.; Jacobsson-Svärd, S.
2014-08-01
The FANTOM system is a tabletop sized fast-neutron radiography and tomography system newly developed at the Applied Nuclear Physics Division of Uppsala University. The main purpose of the system is to provide time-averaged steam-and-water distribution measurement capability inside the metallic structures of two-phase test loops for light water reactor thermal-hydraulic studies using a portable fusion neutron generator. The FANTOM system provides a set of 1D neutron transmission data, which may be inserted into tomographic reconstruction algorithms to achieve a 2D mapping of the steam-and-water distribution. In this paper, the selected design of FANTOM is described and motivated. The detector concept is based on plastic scintillator elements, separated for spatial resolution. Analysis of pulse heights on an event-to-event basis is used for energy discrimination. Although the concept allows for close stacking of a large number of detector elements, this demonstrator is equipped with only three elements in the detector and one additional element for monitoring the yield from the neutron generator. The first measured projections on test objects of known configurations are presented. These were collected using a Sodern Genie 16 neutron generator with an isotropic yield of about 1E8 neutrons per second, and allowed for characterization of the instrument's capabilities. At an energy threshold of 10 MeV, the detector offered a count rate of about 500 cps per detector element. The performance in terms of spatial resolution was validated by fitting a Gaussian Line Spread Function to the experimental data, a procedure that revealed a spatial unsharpness in good agreement with the predicted FWHM of 0.5 mm.
Luo, Ji; Yang, Zhong Qin; Xue, Zeng Quan; Liu, Wei Min; Wu, Jin Lei
2006-09-01
It is shown from Kohn-Sham (KS) density-functional theory that in a large molecular system, the Coulomb potential, molecular electrostatic potential, and KS effective potential may exhibit an approximately homogeneous variation in space, in response to a small change of the electron number. The homogeneous variation of potentials underlies the constant interaction (CI) model of quantum dots (QDs) and is related to the delocalization and invariance of KS orbitals, the identical shift of KS levels, and a natural definition of the QD capacitance. Calculation results of a fullerene C60 and a single-walled carbon nanotube are presented. Although the homogeneity of the potential variation is not perfect, it seems to lead to fairly good approximation of the CI model to the addition energy spectra of these systems. PMID:16965100
NASA Astrophysics Data System (ADS)
Luo, Ji; Yang, Zhong Qin; Xue, Zeng Quan; Liu, Wei Min; Wu, Jin Lei
2006-09-01
It is shown from Kohn-Sham (KS) density-functional theory that in a large molecular system, the Coulomb potential, molecular electrostatic potential, and KS effective potential may exhibit an approximately homogeneous variation in space, in response to a small change of the electron number. The homogeneous variation of potentials underlies the constant interaction (CI) model of quantum dots (QDs) and is related to the delocalization and invariance of KS orbitals, the identical shift of KS levels, and a natural definition of the QD capacitance. Calculation results of a fullerene C60 and a single-walled carbon nanotube are presented. Although the homogeneity of the potential variation is not perfect, it seems to lead to fairly good approximation of the CI model to the addition energy spectra of these systems.
Quinn, Matt; Smith, Lincoln; Mayley, Giles; Husbands, Phil
2003-10-15
We report on recent work in which we employed artificial evolution to design neural network controllers for small, homogeneous teams of mobile autonomous robots. The robots were evolved to perform a formation-movement task from random starting positions, equipped only with infrared sensors. The dual constraints of homogeneity and minimal sensors make this a non-trivial task. We describe the behaviour of a successful system in which robots adopt and maintain functionally distinct roles in order to achieve the task. We believe this to be the first example of the use of artificial evolution to design coordinated, cooperative behaviour for real robots. PMID:14599322
Darboux integrability of 2-dimensional Hamiltonian systems with homogenous potentials of degree 3
Llibre, Jaume; Valls, Claudia
2014-03-15
We provide a characterization of all Hamiltonian systems of the form H=(p{sub 1}{sup 2}+p{sub 2}{sup 2})/2+V(q{sub 1},q{sub 2}), where V is a homogenous polynomial of degree 3 which are completely integrable with Darboux first integrals.
ERIC Educational Resources Information Center
HUNT, DAVID E.
EDUCATIONAL ENVIRONMENTS, HIGHLY STRUCTURED OR UNSTRUCTURED, WERE DIFFERENTIALLY EFFECTIVE WITH STUDENTS OF VARYING PERSONALITIES. THE REPORT CONSIDERED THE UTILITY AND RELEVANCE OF THE CONCEPTUAL SYSTEMS MODEL BY DESCRIBING A SPECIFIC PROJECT IN WHICH THE MODEL SERVED AS THE BASIS FOR FORMING HOMOGENEOUS CLASSROOM GROUPS. THE PROJECT WAS…
BenAbdallah, Abdallah; Hammami, Mohamed Ali; Kallel, Jalel
2009-03-05
In this paper we present some sufficient conditions for the robust stability and stabilization of time invariant uncertain piecewise linear system using homogenous piecewise polynomial Lyapunov function. The proposed conditions are given in terms of linear matrix inequalities which can be numerically solved. An application of the obtained result is given. It consists in resolving the stabilization of piecewise uncertain linear control systems by using a state piecewise linear feedback.
The Existence of Weak 𝒟-Pullback Exponential Attractor for Nonautonomous Dynamical System
Li, Yongjun; Wei, Xiaona; Zhang, Yanhong
2016-01-01
First, for a process {U(t, τ)∣t ≥ τ}, we introduce a new concept, called the weak 𝒟-pullback exponential attractor, which is a family of sets {ℳ(t)∣t ≤ T}, for any T ∈ ℝ, satisfying the following: (i) ℳ(t) is compact, (ii) ℳ(t) is positively invariant, that is, U(t, τ)ℳ(τ) ⊂ ℳ(t), and (iii) there exist k, l > 0 such that dist(U(t, τ)B(τ), ℳ(t)) ≤ ke −(t−τ); that is, ℳ(t) pullback exponential attracts B(τ). Then we give a method to obtain the existence of weak 𝒟-pullback exponential attractors for a process. As an application, we obtain the existence of weak 𝒟-pullback exponential attractor for reaction diffusion equation in H 0 1 with exponential growth of the external force. PMID:27119090
NASA Astrophysics Data System (ADS)
Maciejewski, Andrzej J.; Przybylska, Maria; Yoshida, Haruo
2012-02-01
We consider a natural Hamiltonian system of n degrees of freedom with a homogeneous potential. We assume that the system admits 1 <= m < n independent and commuting first integrals F1, ... Fm. We give easily computable and effective necessary conditions for the existence of one additional first integral Fm+1 such that all integrals F1, ...Fm+1 are independent, pairwise commute and are meromorphic in a connected neighbourhood of a certain phase curve. These conditions are obtained from an analysis of the differential Galois group of variational equations along a particular solution of the system. We apply our result analysing the problem of the existence of one additional first integral for a homogeneous nonlinear lattice on a line.
Homogeneous distribution of 26Al in the solar system from the Mg isotopic composition of chondrules.
Villeneuve, Johan; Chaussidon, Marc; Libourel, Guy
2009-08-21
The timing of the formation of the first solids in the solar system remains poorly constrained. Micrometer-scale, high-precision magnesium (Mg) isotopic analyses demonstrate that Earth, refractory inclusions, and chondrules from primitive meteorites formed from a reservoir in which short-lived aluminum-26 (26Al) and Mg isotopes were homogeneously distributed at +/-10%. This level of homogeneity validates the use of 26Al as a precise chronometer for early solar system events. High-precision chondrule 26Al isochrons show that several distinct chondrule melting events took place from approximately 1.2 million years (My) to approximately 4 My after the first solids condensed from the solar nebula, with peaks between approximately 1.5 and approximately 3 My, and that chondrule precursors formed as early as 0.87(-0.16)(+0.19) My after. PMID:19696348
Bistable self-assembly in homogeneous colloidal systems for flexible modular architectures.
Steinbach, G; Nissen, D; Albrecht, M; Novak, E V; Sánchez, P A; Kantorovich, S S; Gemming, S; Erbe, A
2016-03-14
This paper presents a homogeneous system of magnetic colloidal particles that self-assembles via two structural patterns of different symmetry. Based on a qualitative comparison between a real magnetic particles system, analytical calculations and molecular dynamics simulations, it is shown that bistability can be achieved by a proper tailoring of an anisotropic magnetization distribution inside the particles. The presented bistability opens new possibilities to form two-dimensionally extended and flexible structures where the connectivity between the particles can be changed in vivo. PMID:26932530
Global stabilisation of a class of generalised cascaded systems by homogeneous method
NASA Astrophysics Data System (ADS)
Ding, Shihong; Zheng, Wei Xing
2016-04-01
This paper considers the problem of global stabilisation of a class of generalised cascaded systems. By using the extended adding a power integrator technique, a global controller is first constructed for the driving subsystem. Then based on the homogeneous properties and polynomial assumption, it is shown that the stabilisation of the driving subsystem implies the stabilisation of the overall cascaded system. Meanwhile, by properly choosing some control parameters, the global finite-time stability of the closed-loop cascaded system is also established. The proposed control method has several new features. First, the nonlinear cascaded systems considered in the paper are more general than the conventional ones, since the powers in the nominal part of the driving subsystem are not required to be restricted to ratios of positive odd numbers. Second, the proposed method has some flexible parameters which provide the possibility for designing continuously differentiable controllers for cascaded systems, while the existing designed controllers for such kind of cascaded systems are only continuous. Third, the homogenous and polynomial conditions adopted for the driven subsystem are easier to verify when compared with the matching conditions that are widely used previously. Furthermore, the efficiency of the proposed control method is validated by its application to finite-time tracking control of non-holonomic wheeled mobile robot.
NASA Astrophysics Data System (ADS)
Kirkegaard, Casper; Foged, Nikolaj; Auken, Esben; Christiansen, Anders Vest; Sørensen, Kurt
2012-09-01
Helicopter borne time domain EM systems historically measure only the Z-component of the secondary field, whereas fixed wing systems often measure all field components. For the latter systems the X-component is often used to map discrete conductors, whereas it finds little use in the mapping of layered settings. Measuring the horizontal X-component with an offset loop helicopter system probes the earth with a complementary sensitivity function that is very different from that of the Z-component, and could potentially be used for improving resolution of layered structures in one dimensional modeling. This area is largely unexplored in terms of quantitative results in the literature, since measuring and inverting X-component data from a helicopter system is not straightforward: The signal strength is low, the noise level is high, the signal is very sensitive to the instrument pitch and the sensitivity function also has a complex lateral behavior. The basis of our study is a state of the art inversion scheme, using a local 1D forward model description, in combination with experiences gathered from extending the SkyTEM system to measure the X component. By means of a 1D sensitivity analysis we motivate that in principle resolution of layered structures can be improved by including an X-component signal in a 1D inversion, given the prerequisite that a low-pass filter of suitably low cut-off frequency can be employed. In presenting our practical experiences with modifying the SkyTEM system we discuss why this prerequisite unfortunately can be very difficult to fulfill in practice. Having discussed instrumental limitations we show what can be obtained in practice using actual field data. Here, we demonstrate how the issue of high sensitivity towards instrument pitch can be overcome by including the pitch angle as an inversion parameter and how joint inversion of the Z- and X-components produces virtually the same model result as for the Z-component alone. We conclude that
On the efficiency of 1D atom localisation via EIT in a degenerate two-level atomic system
NASA Astrophysics Data System (ADS)
Dimitrijević, Jelena; Arsenović, Dušan; Jelenković, Branislav M.
2016-04-01
We analyse one-dimensional (1D) subwavelength atom localisation in a cold atomic medium under the action of two optical fields, the standing-wave and travelling probe fields, in the presence of a magnetic field. Optical Bloch equations are solved numerically for the hyperfine atomic transition {{F}g}=2\\to {{F}e}=1 of the 87Rb D1 line. All Zeeman sublevels are included in the calculations. This atomic scheme allows electromagnetically induced transparency (EIT) if the applied magnetic field is zero or small. The results for the position-dependent probe absorption are presented for two configurations, depending on the orientation of the magnetic field with respect to the optical fields’ polarisations. The efficiency of the atom localisation is analysed for a large range of field intensities and applied magnetic fields. The observed behaviour of the probe absorption is analysed through the effects of EIT induced by two fields of various strengths and its dependence on the applied magnetic fields.
Cu_2(1,4-diazacycloheptane)_2Cl_4: a Quasi-1D S=1/2 Spin Liquid System
NASA Astrophysics Data System (ADS)
Hammar, P. R.; Broholm, C.; Reich, D. H.; Trouw, F.
1996-03-01
The material Cu_2(1,4-diazacycloheptane)_2Cl4 consists of well-separated double chains of Cu atoms, whose structure suggests the possibility of significant antiferromagnetic next-nearest-neighbor interactions(B. Chiari, et al., Inorg. Chem 29), 1172 (1990).. We report on measurements of magnetic susceptibility, \\chi(H,T), heat capacity, C_p(T), and neutron scattering that show that this material has a singlet ground state and a gap to spin-carrying excitations. \\chi(H=0,T) shows a broad peak at T_Peak = 8K indicative of 1D antiferromagnetic correlations. Below the peak, \\chi drops dramatically towards zero. For T << T_Peak, \\chi(H)≈ 0 below a critical field HC = 6.6T and rises sharply above HC to a plateau at 8T. Below T_Peak, C_p(T) ∝ T-3/2exp(-Δ/T) with an activation energy Δ = 10K. Inelastic neutron scattering on powders shows a gap of 0.8 meV and a magnetic bandwidth of 0.6 meV. Comparison of these data to predictions for S=1/2 spin ladders and next-near-neighbor chains will be discussed. Supported by NSF grants DMR93-02065 and DMR94-53362, DOE BES-Materials Science contract W-31-109-ENG-38 with IPNS-ANL, and by the David and Lucile Packard Foundation
Ryland, Bradford L.; Stahl, Shannon S.
2014-01-01
Alcohol and amine oxidations are common reactions in laboratory and industrial synthesis of organic molecules. Aerobic oxidation methods have long been sought for these transformations, but few practical methods exist that offer advantages over traditional oxidation methods. Recently developed homogeneous Cu/TEMPO (TEMPO = 2,2,6,6-tetramethylpiperidinyl-N-oxyl) and related catalyst systems appear to fill this void. The reactions exhibit high levels of chemoselectivity and broad functional-group tolerance, and they often operate efficiently at room temperature with ambient air as the oxidant. These advances, together with their historical context and recent applications, are highlighted in this minireview. PMID:25044821
3D homogeneity study in PMMA layers using a Fourier domain OCT system
NASA Astrophysics Data System (ADS)
Briones-R., Manuel de J.; Torre-Ibarra, Manuel H. De La; Tavera, Cesar G.; Luna H., Juan M.; Mendoza-Santoyo, Fernando
2016-11-01
Micro-metallic particles embedded in polymers are now widely used in several industrial applications in order to modify the mechanical properties of the bulk. A uniform distribution of these particles inside the polymers is highly desired for instance, when a biological backscattering is simulated or a bio-framework is designed. A 3D Fourier domain optical coherence tomography system to detect the polymer's internal homogeneity is proposed. This optical system has a 2D camera sensor array that records a fringe pattern used to reconstruct with a single shot the tomographic image of the sample. The system gathers the full 3D tomographic and optical phase information during a controlled deformation by means of a motion linear stage. This stage avoids the use of expensive tilting stages, which in addition are commonly controlled by piezo drivers. As proof of principle, a series of different deformations were proposed to detect the uniform or non-uniform internal deposition of copper micro particles. The results are presented as images coming from the 3D tomographic micro reconstruction of the samples, and the 3D optical phase information that identifies the in-homogeneity regions within the Poly methyl methacrylate (PMMA) volume.
Longevity of duct tape in residential air distribution systems: 1-D, 2-D, and 3-D joints
Abushakra, Bass
2002-05-30
The aging tests conducted so far showed that duct tape tends to degrade in its performance as the joint it is applied to requires a geometrical description of a higher number of space dimensions (1-D, 2-D, 3-D). One-dimensional joints are the easiest to seal with duct tape, and thus the least to experience failure. Two-dimensional joints, such as the flexible duct core-to-collar joints tested in this study, are less likely to fail than three-dimensional collar-to-plenum joints, as the shrinkage could have a positive effect in tightening the joint. Three-dimensional joints are the toughest to seal and the most likely to experience failure. The 2-D flexible duct core-to-collar joints passed the six-month period of the aging test in terms of leakage, but with the exception of the foil-butyl tape, showed degradation in terms hardening, brittleness, partial peeling, shrinkage, wrinkling, delamination of the tape layers, flaking, cracking, bubbling, oozing and discoloration. The baking test results showed that the failure in the duct tape joints could be attributed to the type of combination of the duct tape and the material it is applied to, as the duct tape behaves differently with different substrates. Overall, the foil-butyl tape (Tape 4) had the best results, while the film tape (Tape 3) showed the most deterioration. The conventional duct tapes tested (Tape 1 and Tape 2) were between these two extremes, with Tape 2 performing better than Tape 1. Lastly, we found that plastic straps became discolored and brittle during the tests, and a couple of straps broke completely. Therefore, we recommend that clamping the duct-taped flexible core-to-collar joints should be done with metallic adjustable straps.
Optimal dynamics for quantum-state and entanglement transfer through homogeneous quantum systems
Banchi, L.; Apollaro, T. J. G.; Cuccoli, A.; Vaia, R.; Verrucchi, P.
2010-11-15
The capability of faithfully transmit quantum states and entanglement through quantum channels is one of the key requirements for the development of quantum devices. Different solutions have been proposed to accomplish such a challenging task, which, however, require either an ad hoc engineering of the internal interactions of the physical system acting as the channel or specific initialization procedures. Here we show that optimal dynamics for efficient quantum-state and entanglement transfer can be attained in generic quantum systems with homogeneous interactions by tuning the coupling between the system and the two attached qubits. We devise a general procedure to determine the optimal coupling, and we explicitly implement it in the case of a channel consisting of a spin-(1/2)XY chain. The quality of quantum-state and entanglement transfer is found to be very good and, remarkably, almost independent of the channel length.
Zeng, Qinghui; Li, Qin; Ji, Wenyu; Bin, Xue; Song, Jie
2016-01-01
With growing concerns about health issues worldwide, elegant sensors with high sensitivity and specificity for virus/antigens (Ag) detection are urgent to be developed. Homogeneous immunoassays (HIA) are an important technique with the advantages of small sample volumes requirement and pretreatment-free process. HIA are becoming more favorable for the medical diagnosis and disease surveillance than heterogeneous immunoassays. An important subset of HIA relies on the effect of fluorescence resonance energy transfer (FRET) via a donor-acceptor (D–A) platform, e.g., quantum dots (QDs) donor based FRET system. Being an excellent plasmonic material, silver triangular nanoplates (STNPs) have unique advantages in displaying surface plasmon resonance in the visible to near infrared spectral region, which make them a better acceptor for pairing with QDs in a FRET-based sensing system. However, the reported STNPs generally exhibited broad size distributions, which would greatly restrict their application as HIA acceptor for high detection sensitivity and specificity purpose. In this work, uniform STNPs and red-emitting QDs are firstly applied to construct FRET nanoplatform in the advanced HIA and further be exploited for analyzing virus Ag. The uniform STNPs/QDs nanoplatform based medical sensor provides a straightforward and highly sensitive method for Ag analysis in homogeneous form. PMID:27198713
NASA Astrophysics Data System (ADS)
Zeng, Qinghui; Li, Qin; Ji, Wenyu; Bin, Xue; Song, Jie
2016-05-01
With growing concerns about health issues worldwide, elegant sensors with high sensitivity and specificity for virus/antigens (Ag) detection are urgent to be developed. Homogeneous immunoassays (HIA) are an important technique with the advantages of small sample volumes requirement and pretreatment-free process. HIA are becoming more favorable for the medical diagnosis and disease surveillance than heterogeneous immunoassays. An important subset of HIA relies on the effect of fluorescence resonance energy transfer (FRET) via a donor-acceptor (D–A) platform, e.g., quantum dots (QDs) donor based FRET system. Being an excellent plasmonic material, silver triangular nanoplates (STNPs) have unique advantages in displaying surface plasmon resonance in the visible to near infrared spectral region, which make them a better acceptor for pairing with QDs in a FRET-based sensing system. However, the reported STNPs generally exhibited broad size distributions, which would greatly restrict their application as HIA acceptor for high detection sensitivity and specificity purpose. In this work, uniform STNPs and red-emitting QDs are firstly applied to construct FRET nanoplatform in the advanced HIA and further be exploited for analyzing virus Ag. The uniform STNPs/QDs nanoplatform based medical sensor provides a straightforward and highly sensitive method for Ag analysis in homogeneous form.
Zeng, Qinghui; Li, Qin; Ji, Wenyu; Bin, Xue; Song, Jie
2016-01-01
With growing concerns about health issues worldwide, elegant sensors with high sensitivity and specificity for virus/antigens (Ag) detection are urgent to be developed. Homogeneous immunoassays (HIA) are an important technique with the advantages of small sample volumes requirement and pretreatment-free process. HIA are becoming more favorable for the medical diagnosis and disease surveillance than heterogeneous immunoassays. An important subset of HIA relies on the effect of fluorescence resonance energy transfer (FRET) via a donor-acceptor (D-A) platform, e.g., quantum dots (QDs) donor based FRET system. Being an excellent plasmonic material, silver triangular nanoplates (STNPs) have unique advantages in displaying surface plasmon resonance in the visible to near infrared spectral region, which make them a better acceptor for pairing with QDs in a FRET-based sensing system. However, the reported STNPs generally exhibited broad size distributions, which would greatly restrict their application as HIA acceptor for high detection sensitivity and specificity purpose. In this work, uniform STNPs and red-emitting QDs are firstly applied to construct FRET nanoplatform in the advanced HIA and further be exploited for analyzing virus Ag. The uniform STNPs/QDs nanoplatform based medical sensor provides a straightforward and highly sensitive method for Ag analysis in homogeneous form. PMID:27198713
Non-constant positive steady-states of a diffusive predator-prey system in homogeneous environment
NASA Astrophysics Data System (ADS)
Ko, Wonlyul; Ryu, Kimun
2007-03-01
In this paper, we investigate the existence and non-existence of non-constant positive steady-states of a diffusive predator-prey interaction system under homogeneous Neumann boundary condition. In homogeneous environment, we show that the predator-prey model with Leslie-Gower functional response has no non-constant positive solution, but the system with a general functional response may have at least one non-constant positive steady-state under some conditions.
NASA Astrophysics Data System (ADS)
Lizotte, Todd; Dickey, Fred; Brown, Dan
2010-08-01
Beam shaping technology can greatly improve laser process efficiency by enabling parallel processes and increasing precision, quality and process stability. This paper outlines a system design, optical code analysis and the bench testing of a patented [1,2] laser beam homogenization and imaging system using prism beam splitting to produce a three spot array. The system uses a beam integrator to produce a rectangular spot that is split into three beams by two prisms. A second set of prisms directs the two outer beams onto an imaging lens and sets the pitch of the virtual spots. These beams, with the central beam, are imaged to form three spots with the required pitch. A prototype system design was developed for two approaches based on the first principles. The prototype system parameters were adjusted to minimize the requirements of the elements such as the imaging lens and prisms. Since the two systems require a relatively fast imaging lens, and there are aberrations associated with the prisms, a detailed optical design was conducted to determine the performance of the two approaches and to assess the complexity of the imaging lens. This paper will present the various positive and negative attributes of the two beam shaper designs within an optical system and how the best design was selected for prototyping and bench testing. Various data will be presented at each stage of design evaluation to the final bench test.
THE HOMOGENEOUS STUDY OF TRANSITING SYSTEMS (HoSTS). I. THE PILOT STUDY OF WASP-13
Gomez Maqueo Chew, Yilen; Cargile, Phillip; Hebb, Leslie; Stassun, Keivan G.; Faedi, Francesca; Pollacco, Don; Doyle, Amanda P.; Smalley, Barry; Ghezzi, Luan; Cunha, Katia; Smith, Verne V.; Sousa, Sergio; Santos, Nuno C.; Barros, Susana C. C.; Schuler, Simon C.; Collier Cameron, Andrew
2013-05-01
We present the fundamental stellar and planetary properties of the transiting planetary system WASP-13 within the framework of the Homogeneous Study of Transiting Systems (HoSTS). HoSTS aims to derive the fundamental stellar (T{sub eff}, [Fe/H], M{sub *}, R{sub *}) and planetary (M{sub pl}, R{sub pl}, T{sub eq}) physical properties of known transiting planets using a consistent methodology and homogeneous high-quality data set. Four spectral analysis techniques are independently applied to a Keck+HIRES spectrum of WASP-13 considering two distinct cases: unconstrained parameters and constrained log g from transit light curves. We check the derived stellar temperature against that from a different temperature diagnostic based on an INT+IDS H{alpha} spectrum. The four unconstrained analyses render results that are in good agreement, and provide an improvement of 50% in the precision of T{sub eff}, and of 85% in [Fe/H] with respect to the WASP-13 discovery paper. The planetary parameters are then derived via the Monte Carlo Markov Chain modeling of the radial velocity and light curves, in iteration with stellar evolutionary models to derive realistic uncertainties. WASP-13 (1.187 {+-} 0.065 M{sub Sun }; 1.574 {+-} 0.048 R{sub Sun }) hosts a Saturn-mass, transiting planet (0.500 {+-} 0.037 M{sub Jup}; 1.407 {+-} 0.052 R{sub Jup}), and is at the end of its main-sequence lifetime (4-5.5 Gyr). Our analysis of WASP-13 showcases that both a detailed stellar characterization and transit modeling are necessary to well determine the fundamental properties of planetary systems, which are paramount in identifying and determining empirical relationships between transiting planets and their hosts.
NASA Astrophysics Data System (ADS)
Aguilar-López, Ricardo; López-Pérez, Pablo A.; Lara-Cisneros, Gerardo; Femat, Ricardo
2016-09-01
In this paper, a robust nonlinear feedback control scheme with adaptive gain is proposed to control the chaotic behavior in a Bose-Einstein condensate (BEC). The control goal concerns the track or regulation purposes. The BEC system is represented as stochastic ordinary differential equations with measured output perturbed by Gaussian noise, which represents the nature of the quantum systems. The convergence of the BEC control law is analyzed under the frame of the Lyapunov stability theory. Numerical experiments show an adequate performance of the proposed methodology under the required conditions. The results are applicable when the shape of the condensate is sufficiently simple.
Timing and extent of Mg and Al isotopic homogenization in the early inner Solar System
NASA Astrophysics Data System (ADS)
Mishra, Ritesh Kumar; Chaussidon, Marc
2014-03-01
The first million years of the Solar System is a key period when the first solids were formed from the nebula gas. The chronology of the different processes at the origin of these solids is still largely unknown and relies strongly on the assumption made of homogeneous distribution for short-lived radioactive nuclides such as 26Al. This assumption is questioned. In this study, in situ 26Al-26Mg isotope systematics was studied with high precision in 12 calcium, aluminum-rich inclusions (CAIs) (1 type A, 2 type B, 5 type C, and 4 fine grained spinel-rich), 2 amoeboid olivine aggregates (AOAs), and 2 Al-rich chondrules from Efremovka and Vigarano. The (26Al/27Al)i in these early Solar System solids (the subscript ‘i’ stands for the initial isotope ratio obtained from the mineral 26Al isochron) range from ∼6.5×10-5 to 0.2×10-5 with δMgi*26 from -0.08 to +0.37‰. The (26Al/27Al)i and δMgi*26 of CAIs and chondrules can be explained by formation of their precursors from a homogeneous reservoir (Solar System Initial, noted hereafter SSI) with initial magnesium isotopic composition of δMgSSI*26=-0.052±0.013‰ and initial (26Al/27Al)SSI abundance of (5.62±0.42)×10-5. The high precision magnesium isotope data obtained in the present study and literature data allows identifying a few epochs of formation/reprocessing of CAIs. The time periods of these epochs correspond well with the median life times of the pre-main sequence evolution of stars of Solar mass if we anchor the (Al26/Al27)SSI=(5.62±0.42)×10-5 to the beginning of class I phase. This provides a natural explanation to the range of (26Al/27Al)i - (∼6 to 0.02) × 10-5 seen in corundum grains, FUN (Fractionation and Unidentified Nuclear Effects) CAIs, ultrarefractory CAIs, normal CAIs, and chondrules, and suggests a possible relationship between the astrophysical conditions and the formation of these early solids. Corundum grains, FUN CAIs, ultrarefractory CAIs would have formed during the class 0 of
NASA Astrophysics Data System (ADS)
Vlk, Alexandra; Stokes, Sarah; Wang, Yi; Hicks, Zachary; Zhang, Xinxing; Blando, Nicolas; Frock, Andrew; Marquez, Sara; Bowen, Kit; Bowen Lab JHU Team
Anion photoelectron spectroscopic (PES) and density functional theory (DFT) studies on the dimer anion of (2-hydroxypyridine)2-are reported. The experimentally measured vertical detachment energy (VDE) of 1.21eV compares well with the theoretically predicted values. The 2-hydroxypyridine anionic dimer system was investigated because of its resemblance to the nitrogenous heterocyclic pyrimidine nucleobases. Experimental and theoretical results show electron induced proton transfer (EIPT) in both the lactim and lactam homogeneous dimers. Upon electron attachment, the anion can serve as the intermediate between the two neutral dimers. A possible double proton transfer process can occur from the neutral (2-hydroxypyridine)2 to (2-pyridone)2 through the dimer anion. This potentially suggests an electron catalyzed double proton transfer mechanism of tautomerization. Research supported by the NSF Grant No. CHE-1360692.
Single parameter scaling for 1d systems with scale-free long-range correlated disordered potentials
NASA Astrophysics Data System (ADS)
Sandler, Nancy; Petersen, Greg
2013-03-01
Disordered optical lattices have renewed the interest in localization physics under power-law long-range correlated disorder potentials. For these systems, insight can be gained by combining numerical data and analytic expressions based on scaling laws. Thus, the absence of a transition in short-range correlated disordered systems can been proved by verifying the validity of the single parameter scaling (SPS) hypothesis for the distribution function of the dimensionless conductance. In this talk we discuss this hypothesis for a system with scale-free long-range correlated disorder potentials of the form ~ 1 /rα as a function of the correlation exponent α. We present results for the 1st (the β-function) and 2nd (variance) cumulants of the distribution function, and show a violation of SPS at an energy scale ESPS, that scales with an α-renormalized disorder strength. Calculations for the localization length reveals the existence of a crossover scale Ecross between two regions as correlations increase. An increased number of more extended-like states appear near the band-center while states near the band edges experience reduced localization lengths. We confirm previously predicted scaling behavior near the band edge and center. Supported by NSF-MWN/CIAM and NSF-PIRE.
NASA Astrophysics Data System (ADS)
Luck, J. M.
2016-03-01
We investigate the equilibration of a small isolated quantum system by means of its matrix of asymptotic transition probabilities in a preferential basis. The trace of this matrix is shown to measure the degree of equilibration of the system launched from a typical state, from the standpoint of the chosen basis. This approach is substantiated by an in-depth study of the example of a tight-binding particle in one dimension. In the regime of free ballistic propagation, the above trace saturates to a finite limit, testifying good equilibration. In the presence of a random potential, the trace grows linearly with the system size, testifying poor equilibration in the insulating regime induced by Anderson localization. In the weak-disorder situation of most interest, a universal finite-size scaling law describes the crossover between the ballistic and localized regimes. The associated crossover exponent 2/3 is dictated by the anomalous band-edge scaling characterizing the most localized energy eigenstates.
How does money memorize social interactions? Understanding time-homogeneity in monetary systems
NASA Astrophysics Data System (ADS)
Braun, Dieter; Schmitt, Matthias; Schacker, Andreas
2013-03-01
Understanding how money shapes and memorizes our social interactions is central to modern life. There are many schools of thought on as to how monetary systems contribute to crises or boom/bust cycles and how monetary policy can try to avert them. We find that statistical physics gives a refreshing perspective. We analyze how credit mechanisms introduce non-locality and time-heterogeneity to the monetary memory. Motivated by an analogy to particle physics, locality and time-homogeneity can be imposed to monetary systems. As a result, a full reserve banking system is complemented with a bi-currency system of non-bank assets (``money'') and bank assets (``antimoney''). Payment can either be made by passing on money or by receiving antimoney. As a result, a free floating exchange rate between non-bank assets and bank assets is established. Interestingly, this monetary memory allows for credit creation by the simultaneous transfer of money and antimoney at a negotiated exchange rate. We analyze this novel mechanism of liquidity transfer in a model of random social interactions, yielding analytical results for all relevant distributions and the price of liquidity under the conditions of a fully transparent credit market.
Kasinathan, N.; Rajakumar, A.; Vaidyanathan, G.; Chetal, S.C.
1995-09-01
Post shutdown decay heat removal is an important safety requirement in any nuclear system. In order to improve the reliability of this function, Liquid metal (sodium) cooled fast breeder reactors (LMFBR) are equipped with redundant hot pool dipped immersion coolers connected to natural draught air cooled heat exchangers through intermediate sodium circuits. During decay heat removal, flow through the core, immersion cooler primary side and in the intermediate sodium circuits are also through natural convection. In order to establish the viability and validate computer codes used in making predictions, a 1:20 scale experimental model called RAMONA with water as coolant has been built and experimental simulation of decay heat removal situation has been performed at KfK Karlsruhe. Results of two such experiments have been compiled and published as benchmarks. This paper brings out the results of the numerical simulation of one of the benchmark case through a 1D/2D coupled code system, DHDYN-1D/THYC-2D and the salient features of the comparisons. Brief description of the formulations of the codes are also included.
Statistical mechanics of a time-homogeneous system of money and antimoney
NASA Astrophysics Data System (ADS)
Schmitt, Matthias; Schacker, Andreas; Braun, Dieter
2014-03-01
Financial crises appear throughout human history. While there are many schools of thought on what the actual causes of such crises are, it has been suggested that the creation of credit money might be a source of financial instability. We discuss how the credit mechanism in a system of fractional reserve banking leads to non-local transfers of purchasing power that also affect non-involved agents. To overcome this issue, we impose the local symmetry of time homogeneity on the monetary system. A bi-currency system of non-bank assets (money) and bank assets (antimoney) is considered. A payment is either made by passing on money or by receiving antimoney. As a result, a free floating exchange rate between non-bank assets and bank assets is established. Credit creation is replaced by the simultaneous transfer of money and antimoney at a negotiated exchange rate. This is in contrast to traditional discussions of full reserve banking, which stalls creditary lending. With money and antimoney, the problem of credit crunches is mitigated while a full time symmetry of the monetary system is maintained. As a test environment for such a monetary system, we discuss an economy of random transfers. Random transfers are a strong criterion to probe the stability of monetary systems. The analysis using statistical physics provides analytical solutions and confirms that a money-antimoney system could be functional. Equally important to the probing of the stability of such a monetary system is the question of how to implement the credit default dynamics. This issue remains open.
Arunachalam, K; Stauffer, P R; Maccarini, PF; Jacobsen, S; Sterzer, F
2009-01-01
Microwave radiometry has been proposed as a viable noninvasive thermometry approach for monitoring subsurface tissue temperatures and potentially controlling power levels of multielement heat applicators during clinical hyperthermia treatments. With the evolution of technology, several analog microwave radiometry devices have been developed for biomedical applications. In this paper, we describe a digital microwave radiometer with built-in electronics for signal processing and automatic self-calibration. Performance of the radiometer with an Archimedean spiral receive antenna is evaluated over a bandwidth of 3.7–4.2GHz in homogeneous and layered water test loads. Controlled laboratory experiments over the range of 30–50°C characterize measurement accuracy, stability, repeatability and penetration depth sensitivity. The ability to sense load temperature through an intervening water coupling bolus of 6mm thickness is also investigated. To assess clinical utility and sensitivity to electromagnetic interference (EMI), experiments are conducted inside standard clinical hyperthermia treatment rooms with no EM shielding. The digital radiometer provided repeatable measurements with 0.075°C resolution and standard deviation of 0.217°C for homogeneous and layered tissue loads at temperatures between 32–45°C. Within the 3.7–4.2GHz band, EM noise rejection was good other than some interference from overhead fluorescent lights in the same room as the radiometer. The system response obtained for ideal water loads suggests that this digital radiometer should be useful for estimating subcutaneous tissue temperatures under a 6mm waterbolus used during clinical hyperthermia treatments. The accuracy and stability data obtained in water test loads of several configurations support our expectation that single band radiometry should be sufficient for sub-surface temperature monitoring and power control of large multielement array superficial hyperthermia applicators. PMID
Minimum mass of moderator required for criticality of homogeneous low-enriched uranium systems
Jordan, W.C.; Turner, J.C.
1992-12-01
A parametric calculational analysis has been performed in order to estimate the minimum mass of moderator required for criticality of homogeneous low-enriched uranium systems. The analysis was performed using a version of the SCALE-4.0 code system and the 27-group ENDF/B-IV cross-section library. Water-moderated uranyl fluoride (UO[sub 2]F[sub 2] and H[sub 2]O) and hydrofluoric-acid-moderated uranium hexaflouride (UF[sub 6] and HF) systems were considered in the analysis over enrichments of 1.4 to 5 wt % [sup 235]U. Estimates of the minimum critical volume, minimum critical mass of uranium, and the minimum mass of moderator required for criticality are presented. There was significant disagreement between the values generated in this study when compared with a similar undocumented study performed in 1983 using ANISN and the Knight-modified Hansen-Roach cross sections. An investigation into the cause of the disagreement was made, and the results are presented.
Minimum mass of moderator required for criticality of homogeneous low-enriched uranium systems
Jordan, W.C.; Turner, J.C.
1992-12-01
A parametric calculational analysis has been performed in order to estimate the minimum mass of moderator required for criticality of homogeneous low-enriched uranium systems. The analysis was performed using a version of the SCALE-4.0 code system and the 27-group ENDF/B-IV cross-section library. Water-moderated uranyl fluoride (UO{sub 2}F{sub 2} and H{sub 2}O) and hydrofluoric-acid-moderated uranium hexaflouride (UF{sub 6} and HF) systems were considered in the analysis over enrichments of 1.4 to 5 wt % {sup 235}U. Estimates of the minimum critical volume, minimum critical mass of uranium, and the minimum mass of moderator required for criticality are presented. There was significant disagreement between the values generated in this study when compared with a similar undocumented study performed in 1983 using ANISN and the Knight-modified Hansen-Roach cross sections. An investigation into the cause of the disagreement was made, and the results are presented.
Quantitative prediction of clustering instabilities in gas-solid homogeneous cooling systems
NASA Astrophysics Data System (ADS)
Hrenya, Christine; Mitrano, Peter; Li, Xiaoqi; Yin, Xiaolong
2014-11-01
Dynamic particle clusters are widely documented in gas-solid flow systems, including gasification units for coal or biomass, gravity-driven flow over an array of tubes, pneumatic transport lines, etc. Continuum descriptions based on kinetic theory have been known for over a decade to qualitatively predict the presence of such clustering instabilities. The quantitative ability of such continuum descriptions is relatively unexplored, however, and remains unclear given the low-Knudsen assumption upon which the descriptions are based. In particular, the concentration gradient is relatively large across the boundary between the cluster and the surrounding dilute region, which is counter to the small-gradient assumption inherent in the low-Knudsen-number expansion. In this work, we use direct numerical simulations (DNS) of a gas-solid homogeneous cooling system to determine the critical system size needed for the clustering instability to develop. We then compare the results to the same quantity predicted by a continuum description based on kinetic theory. The agreement is quite good over a wide range of parameters. This finding is reminiscent of molecular fluids, namely the ability of the Navier-Stokes equations to predict well outside the expected range of Knudsen numbers.
NASA Astrophysics Data System (ADS)
Kim, W.; Yum, S. S.
2015-12-01
Visibility degradation due to fog can be very hazardous both to ground transportation and aviation traffic. However, prediction of fog using numerical models is difficult because fog formation is usually determined by local meteorological conditions that are hard to be measured and modeled with sufficient resolution. For this reason, there have been several attempts to build a coupled system of a fine resolution 1D model and a 3D mesoscale model with a usual grid resolution. In this study we uses the coupled system of the 1D PAFOG model and the 3D WRF model to simulate fogs formed at a southern coastal region of Korea, where the National Center for Intensive Observation of Severe Weather (NCIO) is located. Unique to NCIO is that it has a 300 m meteorological tower on which some basic meteorological variables (temperature, dew point temperature and winds) are measured at eleven different altitudes. In addition comprehensive cloud physics measurements are made with various remote sensing instruments such as cloud radar, wind profiler, microwave radiometer, micro rain radar. Several fog cases are identified during 2015 and will be simulated by the coupled system. The comprehensive set of measurement data from NCIO will be utilized as input to the model system and for evaluating the results. Particularly the data for initial and boundary conditions, which are tightly connected to the coupled model predictability, are extracted from the tower measurement. Furthermore, various sensitivity experiments will be done to enhance our understanding of the coastal fog formation mechanism. Detailed results will be discussed at the conference.
Ke, Tracy; Fan, Jianqing; Wu, Yichao
2014-01-01
This paper explores the homogeneity of coefficients in high-dimensional regression, which extends the sparsity concept and is more general and suitable for many applications. Homogeneity arises when regression coefficients corresponding to neighboring geographical regions or a similar cluster of covariates are expected to be approximately the same. Sparsity corresponds to a special case of homogeneity with a large cluster of known atom zero. In this article, we propose a new method called clustering algorithm in regression via data-driven segmentation (CARDS) to explore homogeneity. New mathematics are provided on the gain that can be achieved by exploring homogeneity. Statistical properties of two versions of CARDS are analyzed. In particular, the asymptotic normality of our proposed CARDS estimator is established, which reveals better estimation accuracy for homogeneous parameters than that without homogeneity exploration. When our methods are combined with sparsity exploration, further efficiency can be achieved beyond the exploration of sparsity alone. This provides additional insights into the power of exploring low-dimensional structures in high-dimensional regression: homogeneity and sparsity. Our results also shed lights on the properties of the fussed Lasso. The newly developed method is further illustrated by simulation studies and applications to real data. Supplementary materials for this article are available online. PMID:26085701
NASA Astrophysics Data System (ADS)
Southworth, John
2011-11-01
I calculate the physical properties of 32 transiting extrasolar planet and brown-dwarf systems from existing photometric observations and measured spectroscopic parameters. The systems studied include 15 observed by the CoRoT satellite, 10 by Kepler and five by the Deep Impact spacecraft. Inclusion of the objects studied in previous papers leads to a sample of 58 transiting systems with homogeneously measured properties. The Kepler data include observations from Quarter 2, and my analyses of several of the systems are the first to be based on short-cadence data from this satellite. The light curves are modelled using the JKTEBOP code, with attention paid to the treatment of limb darkening, contaminating light, orbital eccentricity, correlated noise and numerical integration over long exposure times. The physical properties are derived from the light-curve parameters, spectroscopic characteristics of the host star and constraints from five sets of theoretical stellar model predictions. An alternative approach using a calibration from eclipsing binary star systems is explored and found to give comparable results whilst imposing a much smaller computational burden. My results are in good agreement with published properties for most of the transiting systems, but discrepancies are identified for CoRoT-5, CoRoT-8, CoRoT-13, Kepler-5 and Kepler-7. Many of the error bars quoted in the literature are underestimated. Refined orbital ephemerides are given for CoRoT-8 and for the Kepler planets. Asteroseismic constraints on the density of the host stars are in good agreement with the photometric equivalents for HD 17156 and TrES-2, but not for HAT-P-7 and HAT-P-11. Complete error budgets are generated for each transiting system, allowing identification of the observations best-suited to improve measurements of their physical properties. Whilst most systems would benefit from further photometry and spectroscopy, HD 17156, HD 80606, HAT-P-7 and TrES-2 are now extremely well
NASA Astrophysics Data System (ADS)
Fontaine, A. A.; Deutsch, S.; Brungart, T. A.; Petrie, H. L.; Fenstermacker, M.
The influence of homogeneous surfactant and homogeneous polymer solutions on the performance of microbubble skin friction reduction was investigated on an axisymmetric body. Carbon dioxide was injected into water, homogeneous surfactant (Aerosol OT) solutions, and homogeneous dilute polymer (Polyethylene oxide) solutions. Integrated skin friction measurements were obtained at two freestream velocities as a function of gas injection rate and polyethylene-oxide concentration. A moderate (50%) decrease in surface tension had little to no effect on the drag reducing characteristics of microbubble injection. At similar gas injection rates, microbubble injection exhibited more drag reduction in the polymer solutions than obtained with microbubble injection into water. However, the increased drag reduction obtained with polymer additives was no more than a multiplicative factor related to the baseline levels of drag reduction achieved by the individual methods, and suggests the mechanism for microbubble skin friction reduction acts independently of the polymer drag reduction.
Yang, Sujin; Yang, Hwajin
2016-06-01
We investigated the impact of early childhood and adulthood bilingualism on the attention system in a group of linguistically and culturally homogeneous children (5- and 6-year olds) and young adults. We administered the child Attention Network Test (ANT) to 63 English monolingual and Korean-English bilingual children and administered the adult ANT to 39 language- and culture-matched college students. Advantageous bilingual effects on attention were observed for both children and adults in global processing levels of inverse efficiency, response time, and accuracy at a magnitude more pronounced for children than for adults. Differential bilingualism effects were evident at the local network level of executive control and orienting in favor of the adult bilinguals only. Notably, however, bilingual children achieved an adult level of accuracy in the incongruent flanker condition, implying enhanced attentional skills to cope with interferences. Our findings suggest that although both child and adult bilinguals share cognitive advantages in attentional functioning, age-related cognitive and linguistic maturation differentially shapes the outcomes of attentional processing at a local network level. PMID:26930166
Zhang, Hao; Fujiwara, Naoya; Kobayashi, Masaharu; Yamada, Shigeki; Liang, Fuyou; Takagi, Shu; Oshima, Marie
2016-08-01
The detailed flow information in the circle of Willis (CoW) can facilitate a better understanding of disease progression, and provide useful references for disease treatment. We have been developing a one-dimensional-zero-dimensional (1D-0D) simulation method for the entire cardiovascular system to obtain hemodynamics information in the CoW. This paper presents a new method for applying 1D-0D simulation to an individual patient using patient-specific data. The key issue is how to adjust the deviation of physiological parameters, such as peripheral resistance, from literature data when patient-specific geometry is used. In order to overcome this problem, we utilized flow information from single photon emission computed tomography (SPECT) data. A numerical method was developed to optimize physiological parameters by adjusting peripheral cerebral resistance to minimize the difference between the resulting flow rate and the SPECT data in the efferent arteries of the CoW. The method was applied to three cases using different sets of patient-specific data in order to investigate the hemodynamics of the CoW. The resulting flow rates in the afferent arteries were compared to those of the phase-contrast magnetic resonance angiography (PC-MRA) data. Utilization of the SPECT data combined with the PC-MRA data showed a good agreement in flow rates in the afferent arteries of the CoW with those of PC-MRA data for all three cases. The results also demonstrated that application of SPECT data alone could provide the information on the ratios of flow distributions among arteries in the CoW. PMID:26721836
Ye, Ran; Harte, Federico
2014-03-01
The effect of high pressure homogenization on the improvement of the stability hydroxypropyl cellulose (HPC) and micellar casein was investigated. HPC with two molecular weights (80 and 1150 kDa) and micellar casein were mixed in water to a concentration leading to phase separation (0.45% w/v HPC and 3% w/v casein) and immediately subjected to high pressure homogenization ranging from 0 to 300 MPa, in 100 MPa increments. The various dispersions were evaluated for stability, particle size, turbidity, protein content, and viscosity over a period of two weeks and Scanning Transmission Electron Microscopy (STEM) at the end of the storage period. The stability of casein-HPC complexes was enhanced with the increasing homogenization pressure, especially for the complex containing high molecular weight HPC. The apparent particle size of complexes was reduced from ~200nm to ~130nm when using 300 MPa, corresponding to the sharp decrease of absorbance when compared to the non-homogenized controls. High pressure homogenization reduced the viscosity of HPC-casein complexes regardless of the molecular weight of HPC and STEM imagines revealed aggregates consistent with nano-scale protein polysaccharide interactions. PMID:24159250
Ye, Ran; Harte, Federico
2013-01-01
The effect of high pressure homogenization on the improvement of the stability hydroxypropyl cellulose (HPC) and micellar casein was investigated. HPC with two molecular weights (80 and 1150 kDa) and micellar casein were mixed in water to a concentration leading to phase separation (0.45% w/v HPC and 3% w/v casein) and immediately subjected to high pressure homogenization ranging from 0 to 300 MPa, in 100 MPa increments. The various dispersions were evaluated for stability, particle size, turbidity, protein content, and viscosity over a period of two weeks and Scanning Transmission Electron Microscopy (STEM) at the end of the storage period. The stability of casein-HPC complexes was enhanced with the increasing homogenization pressure, especially for the complex containing high molecular weight HPC. The apparent particle size of complexes was reduced from ~200nm to ~130nm when using 300 MPa, corresponding to the sharp decrease of absorbance when compared to the non-homogenized controls. High pressure homogenization reduced the viscosity of HPC-casein complexes regardless of the molecular weight of HPC and STEM imagines revealed aggregates consistent with nano-scale protein polysaccharide interactions. PMID:24159250
NASA Technical Reports Server (NTRS)
Warren, W. H., Jr.
1982-01-01
The magnetic tape version of the Catalog of Homogeneous Photometry of Bright Stars on the DDO System is described. The catalog represents a compilation of DDO photometry of 2196 bright G and K stars prepared from observations made at Kitt Peak National and Cerro Tololo Inter-American observatories. Stars representative of good velocities, spectral types, and freedom from companion contamination are presented.
Kumar, Rakesh; Levin, Deborah A
2011-03-28
In the present work, we have simulated the homogeneous condensation of carbon dioxide and ethanol using the Bhatnagar-Gross-Krook based approach. In an earlier work of Gallagher-Rogers et al. [J. Thermophys. Heat Transfer 22, 695 (2008)], it was found that it was not possible to simulate condensation experiments of Wegener et al. [Phys. Fluids 15, 1869 (1972)] using the direct simulation Monte Carlo method. Therefore, in this work, we have used the statistical Bhatnagar-Gross-Krook approach, which was found to be numerically more efficient than direct simulation Monte Carlo method in our previous studies [Kumar et al., AIAA J. 48, 1531 (2010)], to model homogeneous condensation of two small polyatomic systems, carbon dioxide and ethanol. A new weighting scheme is developed in the Bhatnagar-Gross-Krook framework to reduce the computational load associated with the study of homogeneous condensation flows. The solutions obtained by the use of the new scheme are compared with those obtained by the baseline Bhatnagar-Gross-Krook condensation model (without the species weighting scheme) for the condensing flow of carbon dioxide in the stagnation pressure range of 1-5 bars. Use of the new weighting scheme in the present work makes the simulation of homogeneous condensation of ethanol possible. We obtain good agreement between our simulated predictions for homogeneous condensation of ethanol and experiments in terms of the point of condensation onset and the distribution of mass fraction of ethanol condensed along the nozzle centerline. PMID:21456688
NASA Astrophysics Data System (ADS)
Kumar, Rakesh; Levin, Deborah A.
2011-03-01
In the present work, we have simulated the homogeneous condensation of carbon dioxide and ethanol using the Bhatnagar-Gross-Krook based approach. In an earlier work of Gallagher-Rogers et al. [J. Thermophys. Heat Transfer 22, 695 (2008)], it was found that it was not possible to simulate condensation experiments of Wegener et al. [Phys. Fluids 15, 1869 (1972)] using the direct simulation Monte Carlo method. Therefore, in this work, we have used the statistical Bhatnagar-Gross-Krook approach, which was found to be numerically more efficient than direct simulation Monte Carlo method in our previous studies [Kumar et al., AIAA J. 48, 1531 (2010)], to model homogeneous condensation of two small polyatomic systems, carbon dioxide and ethanol. A new weighting scheme is developed in the Bhatnagar-Gross-Krook framework to reduce the computational load associated with the study of homogeneous condensation flows. The solutions obtained by the use of the new scheme are compared with those obtained by the baseline Bhatnagar-Gross-Krook condensation model (without the species weighting scheme) for the condensing flow of carbon dioxide in the stagnation pressure range of 1-5 bars. Use of the new weighting scheme in the present work makes the simulation of homogeneous condensation of ethanol possible. We obtain good agreement between our simulated predictions for homogeneous condensation of ethanol and experiments in terms of the point of condensation onset and the distribution of mass fraction of ethanol condensed along the nozzle centerline.
NASA Astrophysics Data System (ADS)
Dabach, Sharon; Shani, Uri
2010-05-01
As the population grows, irrigated agriculture is using more water and fertilizers to supply the growing food demand. However, the uptake by various plants is only 30 to 50% of the water applied. The remaining water flows to surface water and groundwater and causes their contamination by fertilizers or other toxins such as herbicides or pesticides. To improve the water use efficiency of crops and decrease the drainage below the root zone, irrigation water should be applied according to the plant demand. The aim of this work is to develop an automated irrigation system based on real-time feedback from an inexpensive and reliable integrated sensing system. This system will supply water to plants according to their demand, without any user interference during the entire growth season. To achieve this goal a sensor (Geo-Tensiometer) was designed and tested. This sensor has better contact with the surrounding soil, is more reliable and much cheaper than the ceramic cup tensiometer. A lysimeter experiment was conducted to evaluate a subsurface drip irrigation regime based on the Geo-Tensiometer and compare it to a daily irrigation regime. All of the drippers were wrapped in Geo-textile. By integrating the Geo-Tensiometer within the Geo-textile which surrounds the drippers, we created a homogenous media in the entire lysimeter in which the reading of the matric potential takes place. This media, the properties of which are set and known to us, encourages root growth therein. Root density in this media is very high; therefore most of the plant water uptake is from this area. The irrigation system in treatment A irrigated when the matric potential reached a threshold which was set every morning automatically by the system. The daily treatment included a single irrigation each morning that was set to return 120% of the evapotranspiration of the previous day. All Geo-Tensiometers were connected to an automated washing system, that flushed air trapped in the Geo
Homogeneous liquid-liquid solvent extraction. [Propylene carbonate-water system
Ting, C.S.; Williams, E.T.; Finston, H.L.
1980-01-01
This investigation was undertaken to extend the technique of homogeneous liquid-liquid solvent extraction into propylene carbonate. The mutual solubilities of propylene carbonate in water and vice-versa are shown in the phase diagram. The extraction of a variety of monodentate and bidentate ligand complexes with Fe(III) as a function of ligand concentration and pH were investigated. The monodentate ligands studied include, thiocyanate, chloride, bromide, benzoate, and bathophenanthrolines. The bidentate ligands studied include the various ..beta..-diketones, 8-quinolinol, and also cupferron which was studied under normal conditions, i.e., not under conditions of homogeneous extraction. The homogeneous extraction proved effective for a variety of chelate complexes and ion association complexes of iron giving, in all cases, very rapid extraction as compared with the slow rate of conventional extraction methods.
The isotopic homogeneity in the early solar system: Revisiting the CAI oxygen isotopic anomaly
NASA Astrophysics Data System (ADS)
Ozima, M.; Yamada, A.
2009-12-01
Since the first discovery of the mass-independently fractionated oxygen isotopes in anhydrous, high temperature Ca-Al rich inclusion minerals in carbonaceous meteorites (CAIs) by Clayton et al. (1), their common occurrence in primitive meteorites has generally been regarded to reflect some fundamental process prevalent in the early solar nebula. The CAI oxygen isotopic composition is uniquely characterized by (i) large mass independent isotopic fractionation and (ii) their isotopic data in an oxygen three isotope plot (δ17O - δ18O (δ17O ≡ {(17O/16O)/(17O/16O)SMOW - 1} × 1000) yield nearly a straight line with a slope 1.0. In establishing these characteristics, ion microprobe analyses has played a central role, especially an isotopic mapping technique (isotopography) was crucial (e.g., 2). The extraordinary oxygen isotopic ratio in CAIs is widely attributed to the self-shielding absorption of UV radiation in CO, one of the dominant chemical compounds in the early solar nebula (3). However, the self-shielding scenario necessarily leads to the unusual prediction that a mean solar oxygen isotopic composition differs from most of planetary bodies including Earth, Moon, and Mars. If the self-shielding process were indeed responsible to the CAI oxygen isotopic anomaly, this would require a fundamental revision of the current theory of the origin of the solar system, which generally assumes the initial total vaporization of nebula material to give rise to isotopic homogenization. The GENESIS mission launched in 2001(4), which collected oxygen in the solar wind was hoped to resolve the isotopic composition of the Sun. However, because of difficulties in correcting for instrumental and more importantly for intrinsic isotopic fractionation between the SW and the Sun, a final answer is yet to be seen (5). Here, we show on the basis of the oxygen isotopic fractionation systematics that the self shielding hypothesis cannot explain the key characteristics of the CAI oxygen
NASA Astrophysics Data System (ADS)
Reyle, B. E.
1985-05-01
The OTS was evaluated for intelligibility, reliability and human engineering. The test subjects possessed various levels of experience with wireless or hardwire communication and SCUBA. The conditions under which the equipment was tested varied. Surface air temperatures ranged from 37 to 85 F; water temperatures from 65 to 80 F; and water depths from 8 feet of seawater (FSW) to greater than 60 FSW. The tests were conducted inside a circular 30 foot deep ascent tower, in shallow open bay water, and finally in an open ocean environment. The equipment was evaluated in areas of both high and low noise levels on the surface as well as in water. The OTS produced an overall intelligibility of 89.24% during manned open water testing using the Modified Rhyme Test (MRT) as the evaluation criteria, with a minimum effective range of 330 yards at 12 FSW and at least 875 yards, although it appears that the range of the MK 1-D-A is somewhat greater. Human engineering aspects of the OTS were found to be more than satisfactory, with no material failures encountered during testing. It is interesting to note that whenever the equipment required minor adjustments, these could be effected by the diver in the water (on the surface) and in most cases in less than 5 minutes. The amount of maintenance required on the OTS was minimal.
de Andrade, J C; de Almeida, A M; Coscione, A R; Aleixo, L M
2001-06-01
A new alternative approach for the determination of molybdenum in steel is proposed, using adsorptive stripping voltammetry (AdSV). The determinations are performed in a homogeneous ternary solvent system (HTSS) composed of N,N-dimethylformamide, ethanol and water, with alpha-benzoinoxime (alpha BO) as the complexing agent and a sodium acetate-acetic acid buffer as the support electrolyte. The HTSS composition was optimized by mixture design modelling. The AdSV measurements were performed in the differential pulse mode using an accumulation potential of -1050 mV. Under these optimized experimental conditions, the Mo(VI)-alpha BO reduction current peak potential is observed at potentials near -1250 mV, much lower than those usually reported, and the calibration plot follows the polynomial equation I = 0.359 + 0.265 [CMo(VI)] - 0.015 [CMo(IV)]2 (r2 = 0.997), for Mo concentrations up to 10.0 micrograms L-1. There is a linear range in this calibration plot for Mo(VI) concentrations up to 0.20 microgram L-1, defined by the equation I = 0.353 + 0.385 [CMo(VI)] (r2 = 0.980). In both cases, I is the absolute value for the current in microA and CMo(VI) is the concentration of Mo in microgram L-1. The detection limit for this linear concentration range was estimated as 20 pg L-1. A RSD of 0.43% is associated with the signals at a Mo(VI) level of 0.72 microgram L-1. From the common method-interfering species tested, only iron at Fe/Mo(VI) ratios above 500 and vanadium and tungsten at M/Mo(VI) ratios above 100 appear to affect the analytical response significantly. Phosphorous may also reduce the analytical signal at P/Mo(VI) ratios above 100, due to the formation of the competitive P-Mo complex. The suggested routine procedure was tested by analyzing four stainless steel samples and the results compared well with the ICP-AES measurements. The higher sensitivity of this method permits direct determination of Mo(VI) in steels, eliminating the need of analyte concentration or
NASA Astrophysics Data System (ADS)
Álvarez, Gonzalo A.; Danieli, Ernesto P.; Levstein, Patricia R.; Pastawski, Horacio M.
2007-06-01
An environment interacting with portions of a system leads to multiexponential interaction rates. Within the Keldysh formalism, we fictitiously homogenize the system-environment interaction yielding a uniform decay rate facilitating the evaluation of the propagators. Through an injection procedure we neutralize the fictitious interactions. This technique justifies a stroboscopic representation of the system-environment interaction which is useful for numerical implementation and converges to the natural continuous process. We apply this procedure to a fermionic two-level system and use the Jordan-Wigner transformation to solve a two-spin swapping gate in the presence of a spin environment.
NASA Astrophysics Data System (ADS)
Erbe, B.; Schliemann, J.
2010-12-01
We report an unexpected systematic degeneracy between different multiplets in an inversion symmetric system of two coupled Gaudin models with homogeneous couplings, as occurring for example in the context of solid state quantum information processing. We construct the full degenerate subspace (being of macroscopic dimension), which turns out to lie in the kernel of the commutator between the two Gaudin models and the coupling term. Finally we investigate to what extent the degeneracy is related to the inversion symmetry of the system and find that indeed there is a large class of systems showing the same type of degeneracy.
NASA Technical Reports Server (NTRS)
Pratt, D. T.
1984-01-01
Conventional algorithms for the numerical integration of ordinary differential equations (ODEs) are based on the use of polynomial functions as interpolants. However, the exact solutions of stiff ODEs behave like decaying exponential functions, which are poorly approximated by polynomials. An obvious choice of interpolant are the exponential functions themselves, or their low-order diagonal Pade (rational function) approximants. A number of explicit, A-stable, integration algorithms were derived from the use of a three-parameter exponential function as interpolant, and their relationship to low-order, polynomial-based and rational-function-based implicit and explicit methods were shown by examining their low-order diagonal Pade approximants. A robust implicit formula was derived by exponential fitting the trapezoidal rule. Application of these algorithms to integration of the ODEs governing homogenous, gas-phase chemical kinetics was demonstrated in a developmental code CREK1D, which compares favorably with the Gear-Hindmarsh code LSODE in spite of the use of a primitive stepsize control strategy.
NASA Astrophysics Data System (ADS)
Driba, D. L.; De Lucia, M.; Peiffer, S.
2014-12-01
Fluid-rock interactions in geothermal reservoirs are driven by the state of disequilibrium that persists among solid and solutes due to changing temperature and pressure. During operation of enhanced geothermal systems, injection of cooled water back into the reservoir disturbs the initial thermodynamic equilibrium between the reservoir and its geothermal fluid, which may induce modifications in permeability through changes in porosity and pore space geometry, consequently bringing about several impairments to the overall system.Modeling of fluid-rock interactions induced by injection of cold brine into Groß Schönebeck geothermal reservoir system situated in the Rotliegend sandstone at 4200m depth have been done by coupling geochemical modeling Code Phreeqc with OpenGeoSys. Through batch modeling the re-evaluation of the measured hydrochemical composition of the brine has been done using Quintessa databases, the results from the calculation indicate that a mineral phases comprising of K-feldspar, hematite, Barite, Calcite and Dolomite was found to match the hypothesis of equilibrium with the formation fluid, Reducing conditions are presumed in the model (pe = -3.5) in order to match the amount of observed dissolved Fe and thus considered as initial state for the reactive transport modeling. based on a measured composition of formation fluids and the predominant mineralogical assemblage of the host rock, a preliminary 1D Reactive transport modeling (RTM) was run with total time set to 30 years; results obtained for the initial simulation revealed that during this period, no significant change is evident for K-feldspar. Furthermore, the precipitation of calcite along the flow path in the brine results in a drop of pH from 6.2 to a value of 5.2 noticed over the simulated period. The circulation of cooled fluid in the reservoir is predicted to affect the temperature of the reservoir within the first 100 -150m from the injection well. Examination of porosity change in
An Expert System to Analyze Homogeneity in Fuel Element Plates for Research Reactors
Tolosa, S.C.; Marajofsky, A.
2004-10-06
In the manufacturing control of Fuel Element Plates for Research Reactors, one of the problems to be addressed is how to determine the U-density homogeneity in a fuel plate and how to obtain qualitative and quantitative information in order to establish acceptance or rejection criteria for such, as well as carrying out the quality follow-up. This paper is aimed at developing computing software which implements an Unsupervised Competitive Learning Neural Network for the acknowledgment of regions belonging to a digitalized gray scale image. This program is applied to x-ray images. These images are generated when the x-ray beams go through a fuel plate of approximately 60 cm x 8 cm x 0.1 cm thick. A Nuclear Fuel Element for Research Reactors usually consists of 18 to 22 of these plates, positioned in parallel, in an arrangement of 8 x 7 cm. Carrying out the inspection of the digitalized x-ray image, the neural network detects regions with different luminous densities corresponding to U-densities in the fuel plate. This is used in quality control to detect failures and verify acceptance criteria depending on the homogeneity of the plate. This modality of inspection is important as it allows the performance of non-destructive measurements and the automatic generation of the map of U-relative densities of the fuel plate.
Xie, Xiangpeng; Yue, Dong; Zhang, Huaguang; Xue, Yusheng
2016-03-01
This paper deals with the problem of control synthesis of discrete-time Takagi-Sugeno fuzzy systems by employing a novel multiinstant homogenous polynomial approach. A new multiinstant fuzzy control scheme and a new class of fuzzy Lyapunov functions, which are homogenous polynomially parameter-dependent on both the current-time normalized fuzzy weighting functions and the past-time normalized fuzzy weighting functions, are proposed for implementing the object of relaxed control synthesis. Then, relaxed stabilization conditions are derived with less conservatism than existing ones. Furthermore, the relaxation quality of obtained stabilization conditions is further ameliorated by developing an efficient slack variable approach, which presents a multipolynomial dependence on the normalized fuzzy weighting functions at the current and past instants of time. Two simulation examples are given to demonstrate the effectiveness and benefits of the results developed in this paper. PMID:25823054
Trigo, Jesús Daniel; Martínez, Ignacio; Alesanco, Alvaro; Kollmann, Alexander; Escayola, Javier; Hayn, Dieter; Schreier, Günter; García, José
2012-07-01
This paper investigates the application of the enterprise information system (EIS) paradigm to standardized cardiovascular condition monitoring. There are many specifications in cardiology, particularly in the ECG standardization arena. The existence of ECG formats, however, does not guarantee the implementation of homogeneous, standardized solutions for ECG management. In fact, hospital management services need to cope with various ECG formats and, moreover, several different visualization applications. This heterogeneity hampers the normalization of integrated, standardized healthcare information systems, hence the need for finding an appropriate combination of ECG formats and a suitable EIS-based software architecture that enables standardized exchange and homogeneous management of ECG formats. Determining such a combination is one objective of this paper. The second aim is to design and develop the integrated healthcare information system that satisfies the requirements posed by the previous determination. The ECG formats selected include ISO/IEEE11073, Standard Communications Protocol for Computer-Assisted Electrocardiography, and an ECG ontology. The EIS-enabling techniques and technologies selected include web services, simple object access protocol, extensible markup language, or business process execution language. Such a selection ensures the standardized exchange of ECGs within, or across, healthcare information systems while providing modularity and accessibility. PMID:22453644
A Doppler centroid estimation algorithm for SAR systems optimized for the quasi-homogeneous source
NASA Technical Reports Server (NTRS)
Jin, Michael Y.
1989-01-01
Radar signal processing applications frequently require an estimate of the Doppler centroid of a received signal. The Doppler centroid estimate is required for synthetic aperture radar (SAR) processing. It is also required for some applications involving target motion estimation and antenna pointing direction estimation. In some cases, the Doppler centroid can be accurately estimated based on available information regarding the terrain topography, the relative motion between the sensor and the terrain, and the antenna pointing direction. Often, the accuracy of the Doppler centroid estimate can be improved by analyzing the characteristics of the received SAR signal. This kind of signal processing is also referred to as clutterlock processing. A Doppler centroid estimation (DCE) algorithm is described which contains a linear estimator optimized for the type of terrain surface that can be modeled by a quasi-homogeneous source (QHS). Information on the following topics is presented: (1) an introduction to the theory of Doppler centroid estimation; (2) analysis of the performance characteristics of previously reported DCE algorithms; (3) comparison of these analysis results with experimental results; (4) a description and performance analysis of a Doppler centroid estimator which is optimized for a QHS; and (5) comparison of the performance of the optimal QHS Doppler centroid estimator with that of previously reported methods.
J. Helble; Clara Smith; David Miller
2009-08-31
The overall goal of this project was to produce a working dynamic model to predict the transformation and partitioning of trace metals resulting from combustion of a broad range of fuels. The information provided from this model will be instrumental in efforts to identify fuels and conditions that can be varied to reduce metal emissions. Through the course of this project, it was determined that mercury (Hg) and arsenic (As) would be the focus of the experimental investigation. Experiments were therefore conducted to examine homogeneous and heterogeneous mercury oxidation pathways, and to assess potential interactions between arsenic and calcium. As described in this report, results indicated that the role of SO{sub 2} on Hg oxidation was complex and depended upon overall gas phase chemistry, that iron oxide (hematite) particles contributed directly to heterogeneous Hg oxidation, and that As-Ca interactions occurred through both gas-solid and within-char reaction pathways. Modeling based on this study indicated that, depending upon coal type and fly ash particle size, vaporization-condensation, vaporization-surface reaction, and As-CaO in-char reaction all play a role in arsenic transformations under combustion conditions.
NASA Astrophysics Data System (ADS)
Norman, Matthew R.
2015-02-01
New Hermite Weighted Essentially Non-Oscillatory (HWENO) interpolants are developed and investigated within the Multi-Moment Finite-Volume (MMFV) formulation using the ADER-DT time discretization. Whereas traditional WENO methods interpolate pointwise, function-based WENO methods explicitly form a non-oscillatory, high-order polynomial over the cell in question. This study chooses a function-based approach and details how fast convergence to optimal weights for smooth flow is ensured. Methods of sixth-, eighth-, and tenth-order accuracy are developed. These are compared against traditional single-moment WENO methods of fifth-, seventh-, ninth-, and eleventh-order accuracy to compare against more familiar methods from literature. The new HWENO methods improve upon existing HWENO methods (1) by giving a better resolution of unreinforced contact discontinuities and (2) by only needing a single HWENO polynomial to update both the cell mean value and cell mean derivative. Test cases to validate and assess these methods include 1-D linear transport, the 1-D inviscid Burger's equation, and the 1-D inviscid Euler equations. Smooth and non-smooth flows are used for evaluation. These HWENO methods performed better than comparable literature-standard WENO methods for all regimes of discontinuity and smoothness in all tests herein. They exhibit improved optimal accuracy due to the use of derivatives, and they collapse to solutions similar to typical WENO methods when limiting is required. The study concludes that the new HWENO methods are robust and effective when used in the ADER-DT MMFV framework. These results are intended to demonstrate capability rather than exhaust all possible implementations.
Geometric relationships for homogenization in single-phase binary alloy systems
NASA Technical Reports Server (NTRS)
Unnam, J.; Tenney, D. R.; Stein, B. A.
1978-01-01
A semiempirical relationship is presented which describes the extent of interaction between constituents in single-phase binary alloy systems having planar, cylindrical, or spherical interfaces. This relationship makes possible a quick estimate of the extent of interaction without lengthy numerical calculations. It includes two parameters which are functions of mean concentration and interface geometry. Experimental data for the copper-nickel system are included to demonstrate the usefulness of this relationship.
Xia, Yunsheng; Ye, Jingjing; Tan, Kanghui; Wang, Jiajing; Yang, Guang
2013-07-01
In this study, we design a homogeneous system consisting of Ag nanoprisms and glucose oxidase (GOx) for simple, sensitive, and low-cost colorimetric sensing of glucose in serum. The unmodified Ag nanoprisms and GOx are first mixed with each other. Glucose is then added in the homogeneous mixture. Finally, the nanoplates are etched from triangle to round by H2O2 produced by the enzymatic oxidation, which leads to a more than 120 nm blue shift of the surface plasmon resonance (SPR) absorption band of the Ag nanoplates. This large wavelength shift can be used not only for visual detection (from blue to mauve) of glucose by naked eyes but for reliable and convenient glucose quantification in the range from 2.0 × 10(-7) to 1.0 × 10(-4) M. The detection limit is as low as 2.0 × 10(-7) M, because the used Ag nanoprisms possess (1) highly reactive edges/tips and (2) strongly tip sharpness and aspect ratio dependent SPR absorption. Owing to ultrahigh sensitivity, only 10-20 μL of serum is enough for a one-time determination. The proposed glucose sensor has great potential in the applications of point-of-care diagnostics, especially for third-world countries where high-tech diagnostics aids are inaccessible to the bulk of the population. PMID:23706061
NASA Technical Reports Server (NTRS)
Tenney, D. R.; Unnam, J.
1978-01-01
Diffusion calculations were performed to establish the conditions under which concentration dependence of the diffusion coefficient was important in single, two, and three phase binary alloy systems. Finite-difference solutions were obtained for each type of system using diffusion coefficient variations typical of those observed in real alloy systems. Solutions were also obtained using average diffusion coefficients determined by taking a logarithmic average of each diffusion coefficient variation considered. The constant diffusion coefficient solutions were used as reference in assessing diffusion coefficient variation effects. Calculations were performed for planar, cylindrical, and spherical geometries in order to compare the effect of diffusion coefficient variations with the effect of interface geometries. In most of the cases considered, the diffusion coefficient of the major-alloy phase was the key parameter that controlled the kinetics of interdiffusion.
Homogeneous systems with quadratic integrals, Lie-Poisson quasibrackets, and Kovalevskaya's method
NASA Astrophysics Data System (ADS)
Bizyaev, I. A.; Kozlov, V. V.
2015-12-01
We consider differential equations with quadratic right-hand sides that admit two quadratic first integrals, one of which is a positive-definite quadratic form. We indicate conditions of general nature under which a linear change of variables reduces this system to a certain 'canonical' form. Under these conditions, the system turns out to be divergenceless and can be reduced to a Hamiltonian form, but the corresponding linear Lie-Poisson bracket does not always satisfy the Jacobi identity. In the three-dimensional case, the equations can be reduced to the classical equations of the Euler top, and in four-dimensional space, the system turns out to be superintegrable and coincides with the Euler-Poincaré equations on some Lie algebra. In the five-dimensional case we find a reducing multiplier after multiplying by which the Poisson bracket satisfies the Jacobi identity. In the general case for n>5 we prove the absence of a reducing multiplier. As an example we consider a system of Lotka-Volterra type with quadratic right-hand sides that was studied by Kovalevskaya from the viewpoint of conditions of uniqueness of its solutions as functions of complex time. Bibliography: 38 titles.
Proskurnin, Mikhail A; Ryndina, Elena S; Tsar'kov, Dmitrii S; Shkinev, Valerii M; Smirnova, Adelina; Hibara, Akihide
2011-01-01
The main types of analytical procedures used in thermal-lens spectroscopy and microscopy, which are based on photometric reactions in (i) aqueous solutions, (ii) organo-aqueous mixtures, (iii) polymer-containing (nonionic surfactants or polyethylene glycol) aqueous solutions, (iv) water-organic extraction systems, and (v) two-phase aqueous extraction systems, were compared from the viewpoint of both reproducibility and sensitivity. This comparison was made by examples of the determination of cobalt and iron for batch conditions, flow determination, and detection in HPLC, flow-injection analysis (FIA), and µFIA. It was revealed that for all five types, the real analytical efficiency (a decrease in the limit of detection (LOD) as compared to spectrophotometry) is primarily determined by the reaction conditions, provided that excitation of the thermal lens is the same. Aqueous solutions provide more efficient optimization of reaction conditions than do those in organo-aqueous solutions and solvent-extraction water-organic mixtures. The best results are achieved when shifting to polymer-containing aqueous solutions and two-phase aqueous extraction systems, which decreases in the LODs by a factor of 20 - 100%. PMID:21478613
An empirical relationship for homogenization in single-phase binary alloy systems
NASA Technical Reports Server (NTRS)
Unnam, J.; Tenney, D. R.; Stein, B. A.
1979-01-01
A semiempirical formula is developed for describing the extent of interaction between constituents in single-phase binary alloy systems with planar, cylindrical, or spherical interfaces. The formula contains two parameters that are functions of mean concentration and interface geometry of the couple. The empirical solution is simple, easy to use, and does not involve sequential calculations, thereby allowing quick estimation of the extent of interactions without lengthy calculations. Results obtained with this formula are in good agreement with those from a finite-difference analysis.
Homogeneous bubble nucleation in binary systems of liquid solvent and dissolved gas
NASA Astrophysics Data System (ADS)
Němec, Tomáš
2016-03-01
A formulation of the classical nucleation theory (CNT) is developed for bubble nucleation in a binary system composed of a liquid solvent and a dissolved gas. The theoretical predictions are compared to the experimental nucleation data of four binary mixtures, i.e. diethylether - nitrogen, propane - carbon dioxide, isobutane - carbon dioxide, and R22 (chlorodifluoromethane) - carbon dioxide. The presented CNT formulation is found to improve the precision of the simpler theoretical method of Ward et al. [J. Basic Eng. 92 (10), 71-80, 1970] based on the weak-solution approximation. By analyzing the available experimental nucleation data, an inconsistency in the data reported by Mori et al. [Int. J. Heat Mass Transfer, 19 (10), 1153-1159, 1976] for propane - carbon dioxide and R22 - carbon dioxide is identified.
Distributed computing feasibility in a non-dedicated homogeneous distributed system
NASA Technical Reports Server (NTRS)
Leutenegger, Scott T.; Sun, Xian-He
1993-01-01
The low cost and availability of clusters of workstations have lead researchers to re-explore distributed computing using independent workstations. This approach may provide better cost/performance than tightly coupled multiprocessors. In practice, this approach often utilizes wasted cycles to run parallel jobs. The feasibility of such a non-dedicated parallel processing environment assuming workstation processes have preemptive priority over parallel tasks is addressed. An analytical model is developed to predict parallel job response times. Our model provides insight into how significantly workstation owner interference degrades parallel program performance. A new term task ratio, which relates the parallel task demand to the mean service demand of nonparallel workstation processes, is introduced. It was proposed that task ratio is a useful metric for determining how large the demand of a parallel applications must be in order to make efficient use of a non-dedicated distributed system.
Development of a wet vapor homogeneous liquid metal MHD power system
NASA Astrophysics Data System (ADS)
1989-04-01
During the period covered by this report (October 1988 to March 1989), the following work was done: the mixing stream condensation process was analyzed, and a theoretical model for simulating this process was modified. A parametric study is being conducted at the present time; the separation processes were analyzed; and the experimental system was specified and its design is at present in an advanced stage. The mixing stream condensation process was analyzed. For the parameters defined in the SOW of this project the process was found to be a mist flow direct contact condensation, where the hot gas mixture consisting of inert gas and vapor is the continuous phase, and the subcooled liquid on which the vapor is condensed if the droplets dispersed phase. Two possibilities of creating the mist flow were considered. The first, injecting the cold Liquid Metal (LM) into the Mixing Streams Condenser (MSC) entrance as a jet and breaking it into LM fragments and the fragments into droplets by momentum transfer breakup mechanism. The second, atomizing the cooled LM stream into little droplets (approximately 100 micrometers in diameter) and accelerating them by the gas. The second possibility was preferred due to its much higher heat and mass transfer surface and coefficients relative to the first one.
NASA Astrophysics Data System (ADS)
López-Cubillos, Sofía; Sarmiento, Carlos E.
2013-05-01
Microtrichia are epidermal protuberances that may serve as temporary adhesive devices. Several insects possess these structures; however, they have not previously been reported in social wasps. With scanning electron microscopy, we characterize the shape and abundance of microtrichia in ten species of social wasps (Vespidae: Polistinae) and three species of related taxa (Vespidae: Eumeninae, Pompilidae, and Scoliidae). Semi-thin sections of the head of Leipomeles spilogastra and Apoica albimacula were also studied. We found microtrichia on a thin, flexible membrane connected to the mandible in all the Vespidae specimens. The flexible membrane can be divided into three regions: the basal region that covers the mandibular mesial emargination, the medial region located around the height of the mandibular condyles, and the distal region that appears anterior to the apodeme folding. Basal and distal regions of the membrane are extensively covered by microtrichia while the medial region has either less microtrichia or is entirely devoid of them. The shape and density of the microtrichia differed between species, and these traits are unrelated with nest material construction or phylogenetic closeness. We propose that the microtrichial membrane described is a passive mechanism to keep the wasps' mandibles retracted through a mechanical interlocking system. It is possible that this energy-saving mechanism is present in other mandibulate insects.
Nonreciprocity of edge modes in 1D magnonic crystal
NASA Astrophysics Data System (ADS)
Lisenkov, I.; Kalyabin, D.; Osokin, S.; Klos, J. W.; Krawczyk, M.; Nikitov, S.
2015-03-01
Spin waves propagation in 1D magnonic crystals is investigated theoretically. Mathematical model based on plane wave expansion method is applied to different types of magnonic crystals, namely bi-component magnonic crystal with symmetric/asymmetric boundaries and ferromagnetic film with periodically corrugated top surface. It is shown that edge modes in magnonic crystals may exhibit nonreciprocal behaviour at much lower frequencies than in homogeneous films.
NASA Astrophysics Data System (ADS)
Arunachalam, K.; Stauffer, P. R.; Maccarini, P. F.; Jacobsen, S.; Sterzer, F.
2008-07-01
Microwave radiometry has been proposed as a viable noninvasive thermometry approach for monitoring subsurface tissue temperatures and potentially controlling power levels of multielement heat applicators during clinical hyperthermia treatments. With the evolution of technology, several analog microwave radiometry devices have been developed for biomedical applications. In this paper, we describe a digital microwave radiometer with built-in electronics for signal processing and automatic self-calibration. The performance of the radiometer with an Archimedean spiral receive antenna is evaluated over a bandwidth of 3.7-4.2 GHz in homogeneous and layered water test loads. Controlled laboratory experiments over the range of 30-50 °C characterize measurement accuracy, stability, repeatability and penetration depth sensitivity. The ability to sense load temperature through an intervening water coupling bolus of 6 mm thickness is also investigated. To assess the clinical utility and sensitivity to electromagnetic interference (EMI), experiments are conducted inside standard clinical hyperthermia treatment rooms with no EM shielding. The digital radiometer provided repeatable measurements with 0.075 °C resolution and standard deviation of 0.217 °C for homogeneous and layered tissue loads at temperatures between 32-45 °C. Within the 3.7-4.2 GHz band, EM noise rejection was good other than some interference from overhead fluorescent lights in the same room as the radiometer. The system response obtained for ideal water loads suggests that this digital radiometer should be useful for estimating subcutaneous tissue temperatures under a 6 mm waterbolus used during clinical hyperthermia treatments. The accuracy and stability data obtained in water test loads of several configurations support our expectation that single band radiometry should be sufficient for sub-surface temperature monitoring and power control of large multielement array superficial hyperthermia applicators.
Arunachalam, K; Stauffer, P R; Maccarini, P F; Jacobsen, S; Sterzer, F
2008-07-21
Microwave radiometry has been proposed as a viable noninvasive thermometry approach for monitoring subsurface tissue temperatures and potentially controlling power levels of multielement heat applicators during clinical hyperthermia treatments. With the evolution of technology, several analog microwave radiometry devices have been developed for biomedical applications. In this paper, we describe a digital microwave radiometer with built-in electronics for signal processing and automatic self-calibration. The performance of the radiometer with an Archimedean spiral receive antenna is evaluated over a bandwidth of 3.7-4.2 GHz in homogeneous and layered water test loads. Controlled laboratory experiments over the range of 30-50 degrees C characterize measurement accuracy, stability, repeatability and penetration depth sensitivity. The ability to sense load temperature through an intervening water coupling bolus of 6 mm thickness is also investigated. To assess the clinical utility and sensitivity to electromagnetic interference (EMI), experiments are conducted inside standard clinical hyperthermia treatment rooms with no EM shielding. The digital radiometer provided repeatable measurements with 0.075 degrees C resolution and standard deviation of 0.217 degrees C for homogeneous and layered tissue loads at temperatures between 32-45 degrees C. Within the 3.7-4.2 GHz band, EM noise rejection was good other than some interference from overhead fluorescent lights in the same room as the radiometer. The system response obtained for ideal water loads suggests that this digital radiometer should be useful for estimating subcutaneous tissue temperatures under a 6 mm waterbolus used during clinical hyperthermia treatments. The accuracy and stability data obtained in water test loads of several configurations support our expectation that single band radiometry should be sufficient for sub-surface temperature monitoring and power control of large multielement array superficial
NASA Astrophysics Data System (ADS)
Glushkov, Alexander; Glushkov, Alexander; Loboda, Nataliya; Khokhlov, Valery; Serbov, Nikoly; Svinarenko, Andrey
The purpose of this paper is carrying out the detailed model of the CO2 global turnover in system of "atmosphere-ocean" with using the ocean quasi-homogeneous layer model. Practically all carried out models are functioning in the average annual regime and accounting for the carbon distribution in bio-sphere in most general form (Glushkov et al, 2003). We construct a modified model for cycle of the carbon dioxide, which allows to reproduce a season dynamics of carbon turnover in ocean with account of zone ocean structure (up quasi-homogeneous layer, thermocline and deepest layer). It is taken into account dependence of the CO2 transfer through the bounder between atmosphere and ocean upon temperature of water and air, wind velocity, buffer mechanism of the CO2 dissolution. The same program is realized for atmosphere part of whole system. It is obtained a tempo-ral and space distribution for concentration of non-organic carbon in ocean, partial press of dissolute CO2 and value of exchange on the border between atmosphere and ocean. It is estimated a role of the wind intermixing of the up ocean layer. The increasing of this effect leads to increasing the plankton mass and further particles, which are transferred by wind, contribute to more quick immersion of microscopic shells and organic material. It is fulfilled investigation of sen-sibility of the master differential equations system solutions from the model parameters. The master differential equa-tions system, describing a dynamics of the CO2 cycle, is numerically integrated by the four order Runge-Cutt method under given initial values of valuables till output of solution on periodic regime. At first it is indicated on possible real-zation of the chaos scenario in system. On our data, the difference of the average annual values for the non-organic car-bon concentration in the up quasi-homogeneous layer between equator and extreme southern zone is 0.15 mol/m3, be-tween the equator and extreme northern zone is 0
Vander Hoogerstraete, Tom; Onghena, Bieke; Binnemans, Koen
2013-01-01
Several fundamental extraction parameters such as the kinetics and loading were studied for a new type of metal solvent extraction system with ionic liquids. The binary mixture of the ionic liquid betainium bis(trifluoromethylsulfonyl)imide and water shows thermomorphic behavior with an upper critical solution temperature (UCST), which can be used to avoid the slower mass transfer due to the generally higher viscosity of ionic liquids. A less viscous homogeneous phase and mixing on a molecular scale are obtained when the mixture is heated up above 55 °C. The influence of the temperature, the heating and cooling times, were studied for the extraction of neodymium(III) with betaine. A plausible and equal extraction mechanism is proposed in bis(trifluoromethylsulfonyl)imide, nitrate, and chloride media. After stripping of the metals from the ionic liquid phase, a higher recovery of the ionic liquid was obtained by salting-out of the ionic liquid fraction lost by dissolution in the aqueous phase. The change of the upper critical solution temperature by the addition of HCl or betaine was investigated. In addition, the viscosity was measured below and above the UCST as a function of the temperature. PMID:24169434
Hoogerstraete, Tom Vander; Onghena, Bieke; Binnemans, Koen
2013-01-01
Several fundamental extraction parameters such as the kinetics and loading were studied for a new type of metal solvent extraction system with ionic liquids. The binary mixture of the ionic liquid betainium bis(trifluoromethylsulfonyl)imide and water shows thermomorphic behavior with an upper critical solution temperature (UCST), which can be used to avoid the slower mass transfer due to the generally higher viscosity of ionic liquids. A less viscous homogeneous phase and mixing on a molecular scale are obtained when the mixture is heated up above 55 °C. The influence of the temperature, the heating and cooling times, were studied for the extraction of neodymium(III) with betaine. A plausible and equal extraction mechanism is proposed in bis(trifluoromethylsulfonyl)imide, nitrate, and chloride media. After stripping of the metals from the ionic liquid phase, a higher recovery of the ionic liquid was obtained by salting-out of the ionic liquid fraction lost by dissolution in the aqueous phase. The change of the upper critical solution temperature by the addition of HCl or betaine was investigated. In addition, the viscosity was measured below and above the UCST as a function of the temperature. PMID:24169434
Fichtl, G.H.
1983-09-01
When designing a wind energy converison system (WECS), it may be necessary to take into account the distribution of wind across the disc of rotation. The specific engineering applications include structural strength, fatigue, and control. This wind distribution consists of two parts, namely that associated with the mean wind profile and that associated with the turbulence velocity fluctuation field. The work reported herein is aimed at the latter, namely the distribution of turbulence velocity fluctuations across the WECS disk of rotation. A theory is developed for the two-time covariance matrix for turbulence velocity vector components for wind energy conversion system (WECS) design. The theory is developed for homogeneous and iotropic turbulance with the assumption that Taylor's hypothesis is valid. The Eulerian turbulence velocity vector field is expanded about the hub of the WECS. Formulae are developed for the turbulence velocity vector component covariance matrix following the WECS blade elements. It is shown that upon specification of the turbulence energy spectrum function and the WECS rotation rate, the two-point, two-time covariance matrix of the turbulent flow relative to the WECS bladed elements is determined. This covariance matrix is represented as the sum of nonstationary and stationary contributions. Generalized power spectral methods are used to obtain two-point, double frequency power spectral density functions for the turbulent flow following the blade elements. The Dryden turbulence model is used to demonstrate the theory. A discussion of linear system response analysis is provided to show how the double frequency turbulence spectra might be used to calculate response spectra of a WECS to turbulent flow. Finally the spectrum of the component of turbulence normal to the WECS disc of rotation, following the blade elements, is compared with experimental results.
HOMOGENEOUS NUCLEAR POWER REACTOR
King, L.D.P.
1959-09-01
A homogeneous nuclear power reactor utilizing forced circulation of the liquid fuel is described. The reactor does not require fuel handling outside of the reactor vessel during any normal operation including complete shutdown to room temperature, the reactor being selfregulating under extreme operating conditions and controlled by the thermal expansion of the liquid fuel. The liquid fuel utilized is a uranium, phosphoric acid, and water solution which requires no gus exhaust system or independent gas recombining system, thereby eliminating the handling of radioiytic gas.
NASA Astrophysics Data System (ADS)
Petropoulos, G. P.; North, M. R.; Ireland, G.; Srivastava, P. K.; Rendall, D. V.
2015-03-01
This paper describes the validation of the SimSphere SVAT model conducted at different ecosystem types in the USA and Australia. Specific focus was given to examining the models' ability in predicting Shortwave Incoming Solar Radiation (Rg), Net Radiation (Rnet), Latent Heat (LE), Sensible Heat (H), Air Temperature at 1.3 m (Tair 1.3 m) and Air Temperature at 50 m (Tair 50 m). Model predictions were compared against corresponding in situ measurements acquired for a total of 72 selected days of the year 2011 obtained from 8 sites belonging to the AmeriFlux (USA) and OzFlux (Australia) monitoring networks. Selected sites were representative of a variety of environmental, biome and climatic conditions, to allow for the inclusion of contrasting conditions in the model evaluation. The application of the model confirmed its high capability in representing the multifarious and complex interactions of the Earth system. Comparisons showed a good agreement between modelled and measured fluxes, especially for the days with smoothed daily flux trends. A good to excellent agreement between the model predictions and the in situ measurements was reported, particularly so for the LE, H, T1.3 m and T 50 m parameters (RMSD = 39.47, 55.06 W m-2, 3.23, 3.77 °C respectively). A systematic underestimation of Rg and Rnet (RMSD = 67.83, 58.69 W m-2, MBE = 67.83, 58.69 W m-2 respectively) was also found. Highest simulation accuracies were obtained for the open woodland savannah and mulga woodland sites for most of the compared parameters. Very high values of the Nash-Sutcliffe efficiency index were also reported for all parameters ranging from 0.720 to 0.998, suggesting a very good model representation of the observations. To our knowledge, this study presents the first comprehensive validation of SimSphere, particularly so in USA and Australian ecosystem types. Findings are important and timely, given the rapidly expanding use of this model worldwide both as an educational and research
Detecting different correlation regimes in a 1D Bose gas using in-situ absorption imaging
NASA Astrophysics Data System (ADS)
Salces-Carcoba, Francisco; Sugawa, Seiji; Yue, Yuchen; Putra, Andika; Spielman, Ian
2016-05-01
We present the realization of a single 1D Bose gas (1DBG) using a tightly focused Laguerre-Gauss beam as a waveguide for a 87Rb cloud. Axial confinement is provided by a weak trap that also sets the final density profile. A homogeneous 1DBG at T = 0 can be fully described by the dimensionless interaction parameter γ ~ 1/n, where n is the linear density; at sufficiently low densities the system becomes strongly interacting. An inhomogeneous (trapped) system can enter this description within the local density approximation (LDA) where the interaction parameter becomes position dependent γ(x) ~ 1/n(x). The system then displays different correlation regimes over its extension which can be detected by measuring its equation of state (EoS) or the density density correlations in real space using in-situ absorption imaging.
An asymptotic homogenized neutron diffusion approximation. II. Numerical comparisons
Trahan, T. J.; Larsen, E. W.
2012-07-01
In a companion paper, a monoenergetic, homogenized, anisotropic diffusion equation is derived asymptotically for large, 3-D, multiplying systems with a periodic lattice structure [1]. In the present paper, this approximation is briefly compared to several other well known diffusion approximations. Although the derivation is different, the asymptotic diffusion approximation matches that proposed by Deniz and Gelbard, and is closely related to those proposed by Benoist. The focus of this paper, however, is a numerical comparison of the various methods for simple reactor analysis problems in 1-D. The comparisons show that the asymptotic diffusion approximation provides a more accurate estimate of the eigenvalue than the Benoist diffusion approximations. However, the Benoist diffusion approximations and the asymptotic diffusion approximation provide very similar estimates of the neutron flux. The asymptotic method and the Benoist methods both outperform the standard homogenized diffusion approximation, with flux weighted cross sections. (authors)
1D-VAR Retrieval Using Superchannels
NASA Technical Reports Server (NTRS)
Liu, Xu; Zhou, Daniel; Larar, Allen; Smith, William L.; Schluessel, Peter; Mango, Stephen; SaintGermain, Karen
2008-01-01
Since modern ultra-spectral remote sensors have thousands of channels, it is difficult to include all of them in a 1D-var retrieval system. We will describe a physical inversion algorithm, which includes all available channels for the atmospheric temperature, moisture, cloud, and surface parameter retrievals. Both the forward model and the inversion algorithm compress the channel radiances into super channels. These super channels are obtained by projecting the radiance spectra onto a set of pre-calculated eigenvectors. The forward model provides both super channel properties and jacobian in EOF space directly. For ultra-spectral sensors such as Infrared Atmospheric Sounding Interferometer (IASI) and the NPOESS Airborne Sounder Testbed Interferometer (NAST), a compression ratio of more than 80 can be achieved, leading to a significant reduction in computations involved in an inversion process. Results will be shown applying the algorithm to real IASI and NAST data.
Orthogonality Measurement for Homogenous Projects-Bases
ERIC Educational Resources Information Center
Ivan, Ion; Sandu, Andrei; Popa, Marius
2009-01-01
The homogenous projects-base concept is defined. Next, the necessary steps to create a homogenous projects-base are presented. A metric system is built, which then will be used for analyzing projects. The indicators which are meaningful for analyzing a homogenous projects-base are selected. The given hypothesis is experimentally verified. The…
Quantum Diffusion on Molecular Tubes: Universal Scaling of the 1D to 2D Transition
NASA Astrophysics Data System (ADS)
Chuang, Chern; Lee, Chee Kong; Moix, Jeremy M.; Knoester, Jasper; Cao, Jianshu
2016-05-01
The transport properties of disordered systems are known to depend critically on dimensionality. We study the diffusion coefficient of a quantum particle confined to a lattice on the surface of a tube, where it scales between the 1D and 2D limits. It is found that the scaling relation is universal and independent of the temperature, disorder, and noise parameters, and the essential order parameter is the ratio between the localization length in 2D and the circumference of the tube. Phenomenological and quantitative expressions for transport properties as functions of disorder and noise are obtained and applied to real systems: In the natural chlorosomes found in light-harvesting bacteria the exciton transfer dynamics is predicted to be in the 2D limit, whereas a family of synthetic molecular aggregates is found to be in the homogeneous limit and is independent of dimensionality.
Quantum Diffusion on Molecular Tubes: Universal Scaling of the 1D to 2D Transition.
Chuang, Chern; Lee, Chee Kong; Moix, Jeremy M; Knoester, Jasper; Cao, Jianshu
2016-05-13
The transport properties of disordered systems are known to depend critically on dimensionality. We study the diffusion coefficient of a quantum particle confined to a lattice on the surface of a tube, where it scales between the 1D and 2D limits. It is found that the scaling relation is universal and independent of the temperature, disorder, and noise parameters, and the essential order parameter is the ratio between the localization length in 2D and the circumference of the tube. Phenomenological and quantitative expressions for transport properties as functions of disorder and noise are obtained and applied to real systems: In the natural chlorosomes found in light-harvesting bacteria the exciton transfer dynamics is predicted to be in the 2D limit, whereas a family of synthetic molecular aggregates is found to be in the homogeneous limit and is independent of dimensionality. PMID:27232033
NASA Technical Reports Server (NTRS)
1945-01-01
Vought F4U-1D Corsair: In February and March of 1945 this Corsair was examined in the NACA's 30 x 60 Full Scale Tunnel at Langley Field. The F4U-1D has rockets mounted on its wings for this test. After installation and during testing, the wings would be lowered to their flight position.
Non-cooperative Brownian donkeys: A solvable 1D model
NASA Astrophysics Data System (ADS)
Jiménez de Cisneros, B.; Reimann, P.; Parrondo, J. M. R.
2003-12-01
A paradigmatic 1D model for Brownian motion in a spatially symmetric, periodic system is tackled analytically. Upon application of an external static force F the system's response is an average current which is positive for F < 0 and negative for F > 0 (absolute negative mobility). Under suitable conditions, the system approaches 100% efficiency when working against the external force F.
NASA Astrophysics Data System (ADS)
Zhao, D. Y.; Pan, X. G.; Wang, J. Q.; Wang, Z. M.
2008-01-01
Aiming at combined orbit determination (COD) multi-source data fusion for low earth orbit (LEO) based on bi-satellite positioning system (BPS), an improved variance component estimation (VCE) optimal weighting method of homogeneous data is established with two-step system errors correction. And then an integrated optimal weighting method based on model structure characteristics analysis and VCE estimation of heterogeneous data is put forward by analyzing the essence of multi-source fusion measure model which is a multi-structural, multi-parametric, non-linear regression model. Then the algorithm of optimal weighting and COD parameters estimation is designed, and two kinds of COD simulation experiments are carried out by processing homogeneous data of bi-satellite range sum and its back-up satellite data, heterogeneous data of bi-satellite range sum data and star sensor angle data. Theoretical analysis and simulation computations show that improved VCE method based on two-step system errors correction can gain higher precision than that of traditional experience weighting method for COD of homogeneous data weighting. At the same time, by introducing weighting factor which denotes model structure characteristics and proves the designed optimal weighting algorithm, the amelioration of COD precision of LEO and bi-satellite gain to some extent is feasible from practical application.
Distribution of dopamine D1-D4 receptor subtypes in human dorsal vagal complex.
Hyde, T M; Knable, M B; Murray, A M
1996-11-01
The distribution of D1/D5, D2/D3, D2/D3/D4, and individually, putative D2-D4 receptors across the dorsal vagal complex of the human medulla was assessed with quantitative receptor autoradiography. D1/D5 receptors were found in very low levels. D2 receptors were concentrated in the intermediate and medial subnuclei of the nucleus of the solitary tract (NTS), and in the dorsal motor nucleus of the vagus (DMN), while D3 receptors were more homogeneous across the entire NTS, area postrema (AP), and DMN. In contrast, D4 receptors were found almost exclusively in the intermediate and medial subnuclei of the NTS, and in the DMN. These findings suggest that the "D2 family" of receptors is an important component of brain stem mechanisms regulating visceral function, including gastrointestinal systems, such as emesis, along with cardiovascular and pulmonary systems. Compounds with individual selectivity for D2, D3, or D4 receptors may be useful in the manipulation of neural networks regulating these visceral systems. PMID:8923662
Effective-range signatures in quasi-1D matter waves: sound velocity and solitons
NASA Astrophysics Data System (ADS)
Sgarlata, F.; Mazzarella, G.; Salasnich, L.
2015-06-01
We investigate ultracold and dilute bosonic atoms under strong transverse harmonic confinement using a 1D modified Gross-Pitaevskii equation (1D MGPE), which accounts for the energy dependence of the two-body scattering amplitude within an effective-range expansion. We study sound waves and solitons of the quasi-1D system, comparing the 1D MGPE results with the 1D GPE ones. We find that when the finite-size nature of the interaction is taken into account, the speed of sound and the density profiles of both dark and bright solitons show relevant quantitative changes with respect to predictions given by the standard 1D GPE.
Fu, Jing; Yang, Y Isaac; Zhang, Jun; Chen, Qingde; Shen, Xinghai; Gao, Yi Qin
2016-06-16
The solubility of water in the hydrophobic ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][NTf2]) increases significantly in the presence of HNO3. [C2mim][NTf2] is completely miscible with HNO3 but immiscible with water. The triangular phase diagram of the ternary system [C2mim][NTf2]-HNO3-H2O was determined at 300.1 K. The homogeneous [C2mim][NTf2]-HNO3-H2O phase is thermodynamically stable, while it can be separated into two phases with an increase of water content. Experiments (electrospray ionization mass spectrometry, Fourier transform infrared spectrometry, and (1)H-nuclear magnetic resonance spectrometry) and molecular dynamics simulations were carried out to investigate the interaction between [C2mim][NTf2], HNO3, and water in the homogeneous phase. It was found that NO3(-) ions interact with both C2mim(+) and water via H-bonding and act as a "bridge" to induce a large amount of water to be dissolved in the hydrophobic IL phase. This confirms that the complexes [C2mim-NTf2-C2mim](+) and [NTf2-C2mim-NTf2](-) exist in the homogeneous [C2mim][NTf2]-HNO3-H2O system at the concentration of HNO3 up to 27.01 wt % and of water as high as 20.74 wt %. PMID:27196811
Dynamic MEMS-based linear (1D) diffusers for laser beam homogenizing and beam shaping
NASA Astrophysics Data System (ADS)
Masson, J.; Bich, A.; Noell, W.; Voelkel, R.; Weible, K. J.; De Rooij, N. F.
2009-08-01
We present a dynamic laser beam shaper based on MEMS technology. We show a prototype of a dynamic diffuser made of single crystal silicon. A linearly deformable silicon micromembrane is used to diffuse a laser beam in one dimension. Resonance frequencies of the membrane can range from 1 kHz to 100 kHz. Diffusing angle can be tuned by adjusting the driving voltage. We measured a diffusing angle of 0.16° for an actuation voltage of 20 V.
Mechanical homogenization increases bacterial homogeneity in sputum.
Stokell, Joshua R; Khan, Ammad; Steck, Todd R
2014-07-01
Sputum obtained from patients with cystic fibrosis (CF) is highly viscous and often heterogeneous in bacterial distribution. Adding dithiothreitol (DTT) is the standard method for liquefaction prior to processing sputum for molecular detection assays. To determine if DTT treatment homogenizes the bacterial distribution within sputum, we measured the difference in mean total bacterial abundance and abundance of Burkholderia multivorans between aliquots of DTT-treated sputum samples with and without a mechanical homogenization (MH) step using a high-speed dispersing element. Additionally, we measured the effect of MH on bacterial abundance. We found a significant difference between the mean bacterial abundances in aliquots that were subjected to only DTT treatment and those of the aliquots which included an MH step (all bacteria, P = 0.04; B. multivorans, P = 0.05). There was no significant effect of MH on bacterial abundance in sputum. Although our results are from a single CF patient, they indicate that mechanical homogenization increases the homogeneity of bacteria in sputum. PMID:24759710
Colmont, Marie; Endara, Diana; Aliev, Almaz; Terryn, Christine; Huvé, Marielle; Mentré, Olivier
2013-07-15
Single crystals of two novel bismuth copper oxyphosphates were grown from a unique melt. They have been structurally characterized by means of single crystal X-Ray Diffraction (XRD). Bi{sub 29.4}Cu{sub 9.29}O{sub 32}(PO{sub 4}){sub 16}Cu{sub 2.63} (1) is orthorhombic, space group Pca2{sub 1}, a=33.0549(2)A, b=11.6991(4)A and c=5.2902(2)A, R{sub 1}=0.059 and wR{sub 2}=0.061. Bi{sub 37.2}Cu{sub 18.8}O{sub 44}(PO{sub 4}){sub 24}Cu{sub 5} (2) is orthorhombic, space group Pna2{sub 1}, a=11.6010(3)A, b=47.4384(5)A and c=5.267(2)A, R{sub 1}=0.0940 and wR{sub 2}=0.0981. Both compounds are formed of similar 1D building units (BUs) organized into two different 3D regular intergrowths mediated by phosphate groups. Here, the so-called 1D-BUs are infinite ribbons formed by edge-sharing O(Bi,M){sub 4} tetrahedra with n=4 and n=3 tetrahedra-wide units. Both compounds were analyzed from the viewpoint of their relationship with the parent δ-Bi{sub 2}O{sub 3} fluorite-like structure, where phosphorus atoms substitutes for some Bi sites. A non-exhaustive review of the related structural types is given. We have checked by second harmonic generacy (SHG) microscopy that the two non-centrosymmetric structures (despite polar subunits) lead to SHG before the samples are irreversibly damaged. - Graphical abstract: This paper reports the crystal structure of two new bismuth oxophosphate compounds. Both are built on the association of n=3 and 4 building unit ribbons surrounded by isolated PO4 tetrahedra and tunnels hosting Cu{sup 2+} cations. They come in addition to the numerous Bi-based compounds already pointed out. Once more, this is the proof of the richness of this crystal system. - Highlights: • Two new bismuth oxophosphates were synthesized. • Crystal structure were solved thanks to single crystal X-Ray diffraction. • They show two different associations of n=3 and 4 ribbons built on [O,(Bi,M){sub 4}] tetrahedral sharing edges and surrounded by isolated PO4 groups. • SHG
Maartens, Roy
2011-12-28
The standard model of cosmology is based on the existence of homogeneous surfaces as the background arena for structure formation. Homogeneity underpins both general relativistic and modified gravity models and is central to the way in which we interpret observations of the cosmic microwave background (CMB) and the galaxy distribution. However, homogeneity cannot be directly observed in the galaxy distribution or CMB, even with perfect observations, since we observe on the past light cone and not on spatial surfaces. We can directly observe and test for isotropy, but to link this to homogeneity we need to assume the Copernican principle (CP). First, we discuss the link between isotropic observations on the past light cone and isotropic space-time geometry: what observations do we need to be isotropic in order to deduce space-time isotropy? Second, we discuss what we can say with the Copernican assumption. The most powerful result is based on the CMB: the vanishing of the dipole, quadrupole and octupole of the CMB is sufficient to impose homogeneity. Real observations lead to near-isotropy on large scales--does this lead to near-homogeneity? There are important partial results, and we discuss why this remains a difficult open question. Thus, we are currently unable to prove homogeneity of the Universe on large scales, even with the CP. However, we can use observations of the cosmic microwave background, galaxies and clusters to test homogeneity itself. PMID:22084298
Strongly Interacting Homogeneous Fermi Gases
NASA Astrophysics Data System (ADS)
Mukherjee, Biswaroop; Patel, Parth; Yan, Zhenjie; Struck, Julian; Zwierlein, Martin
2016-05-01
We present a homogeneous box potential for strongly interacting Fermi gases. The local density approximation (LDA) allows measurements on traditional inhomogeneous traps to observe a continuous distribution of Fermi gases in a single shot, but also suffer from a broadened response due to line-of-sight averaging over varying densities. We trap ultracold Fermionic (6 Li) in an optical homogeneous potential and characterize its flatness through in-situ tomography. A hybrid approach combining a cylindrical optical potential with a harmonic magnetic trap allows us to exploit the LDA and measure local RF spectra without requiring significant image reconstruction. We extract various quantities from the RF spectra such as the Tan's contact, and discuss further measurements of homogeneous Fermi systems under spin imbalance and finite temperature.
Barth, G.R.; Hill, M.C.
2005-01-01
This paper evaluates the importance of seven types of parameters to virus transport: hydraulic conductivity, porosity, dispersivity, sorption rate and distribution coefficient (representing physical-chemical filtration), and in-solution and adsorbed inactivation (representing virus inactivation). The first three parameters relate to subsurface transport in general while the last four, the sorption rate, distribution coefficient, and in-solution and adsorbed inactivation rates, represent the interaction of viruses with the porous medium and their ability to persist. The importance of four types of observations to estimate the virus-transport parameters are evaluated: hydraulic heads, flow, temporal moments of conservative-transport concentrations, and virus concentrations. The evaluations are conducted using one- and two-dimensional homogeneous simulations, designed from published field experiments, and recently developed sensitivity-analysis methods. Sensitivity to the transport-simulation time-step size is used to evaluate the importance of numerical solution difficulties. Results suggest that hydraulic conductivity, porosity, and sorption are most important to virus-transport predictions. Most observation types provide substantial information about hydraulic conductivity and porosity; only virus-concentration observations provide information about sorption and inactivation. The observations are not sufficient to estimate these important parameters uniquely. Even with all observation types, there is extreme parameter correlation between porosity and hydraulic conductivity and between the sorption rate and in-solution inactivation. Parameter estimation was accomplished by fixing values of porosity and in-solution inactivation.
Polar discontinuities and 1D interfaces in monolayered materials
NASA Astrophysics Data System (ADS)
Martinez-Gordillo, Rafael; Pruneda, Miguel
2015-12-01
Interfaces are the birthplace of a multitude of fascinating discoveries in fundamental science, and have enabled modern electronic devices, from transistors, to lasers, capacitors or solar cells. These interfaces between bulk materials are always bi-dimensional (2D) 'surfaces'. However the advent of graphene and other 2D crystals opened up a world of possibilities, as in this case the interfaces become one-dimensional (1D) lines. Although the properties of 1D nanoribbons have been extensively discussed in the last few years, 1D interfaces within infinite 2D systems had remained mostly unexplored until very recently. These include grain boundaries in polycrystalline samples, or interfaces in hybrid 2D sheets composed by segregated domains of different materials (as for example graphene/BN hybrids, or chemically different transition metal dichalcogenides). As for their 2D counterparts, some of these 1D interfaces exhibit polar characteristics, and can give rise to fascinating new physical properties. Here, recent experimental discoveries and theoretical predictions on the polar discontinuities that arise at these 1D interfaces will be reviewed, and the perspectives of this new research topic, discussed.
NASA Astrophysics Data System (ADS)
Llibre, Jaume; da Silva, Maurício Fronza
We provide the nine topological global phase portraits in the Poincaré disk of the family of the centers of Kukles polynomial differential systems of the form ẋ = ‑y, ẏ = x + ax5y + bx3y3 + cxy5, where x,y ∈ ℝ and a,b,c are real parameters satisfying a2 + b2 + c2≠0. Using averaging theory up to sixth order we determine the number of limit cycles which bifurcate from the origin when we perturb this system first inside the class of all homogeneous polynomial differential systems of degree 6, and second inside the class of all polynomial differential systems of degree 6.
NASA Astrophysics Data System (ADS)
Harada, Hisashi
2002-05-01
The decomposition of water was performed using a sono-catalytic reaction system, which is a joint system of sonochemical and catalytical reactions. By sono-catalysis, overall water splitting was accomplished through the combined effect of these reactions. Water-soluble ferric (Fe(III)) compounds, Pt-black, and metal oxides such as titanium oxide (TiO2) and iron oxide (Fe2O3) were used as catalysts. Homogeneous Fe(III) catalyst was effective for oxygen (O2) generation under sonication, particularly iron ammonium sulfate (iron alum, (FeNH4(SO4)2). Hydrogen (H2) was also evolved by sonication. Thus, overall water (H2O) splitting was accomplished using the sono-catalytic technique. Furthermore, a photosynthesis-like system under sonication is discussed.
Nonstationary homogeneous nucleation
NASA Technical Reports Server (NTRS)
Harstad, K. G.
1974-01-01
The theory of homogeneous condensation is reviewed and equations describing this process are presented. Numerical computer solutions to transient problems in nucleation (relaxation to steady state) are presented and compared to a prior computation.
1D ferrimagnetism in homometallic chains
NASA Astrophysics Data System (ADS)
Coronado, E.; Gómez-García, C. J.; Borrás-Almenar, J. J.
1990-05-01
The magnetic properties of the cobalt zigzag chain Co(bpy)(NCS)2 (bpy=2,2'-bipyridine) are discussed on the basis of an Ising-chain model that takes into account alternating Landé factors. It is emphasized, for the first time, that a homometallic chain containing only one type of site can give rise to a 1D ferrimagneticlike behavior.
Arora, Shashank; Hegde, Vibha
2014-01-01
Aim: The aim was to evaluate and compare a novel polyamide polymer based obturating system and Gutta-percha and sealer in filling simulated lateral canals and their homogeneity when used for obturating the root canals. Materials and Methods: A total of 60 freshly extracted human single rooted teeth with fully formed apices were selected for this study. Teeth were de-coronated, and roots were standardized to a working length of 15 mm. Root canal preparation was carried out with rotary Protaper file system in all groups. The specimens were then randomly divided into three groups A, B, and C (n = 20). Ten samples from each group were decalcified and simulated lateral canals were made at 2, 4, and 6 mm from the root apex. Remaining ten samples from each group were maintained calcified. Group A was obturated with SmartSeal system (Prosmart-DRFP Ltd., Stamford, UK). Group B was obturated with sectional backfill method. Group C was obutrated with cold lateral compaction method (control). Decalcified samples from the respective groups were analyzed with digital radiography and photography and the measurement of the linear extension and area of lateral canal filling was done using UTHSCSA (UTHSCSA Image Tool for Windows version 3.0, San Antonio, TX, USA) software. Calcified samples were subjected to cone beam computed tomography image analysis sectioned axially. Results: Group A 92.46 ± 19.45 showed greatest extent of filling in lateral canals and denser homogeneity of oburation, followed by Group B 78.43 ± 26.45 and Group C 52.12 ± 36.67. Conclusions: Polyamide polymer obturation proved to have greater efficiency when compared with Gutta-percha system, when used for obturation with regards to adaptation of the sealer and penetration into the simulated lateral canals. PMID:25125851
Understanding 1D Electrostatic Dust Levitation
NASA Astrophysics Data System (ADS)
Hartzell, C. M.; Scheeres, D. J.
2011-12-01
Electrostatically-dominated dust motion has been hypothesized since the Lunar Horizon Glow was observed by the Surveyor spacecraft. The hypothesized occurence of this phenomenon was naturally extended to asteroids due to their small gravities. Additionally, it has been suggested that the dust ponds observed on Eros by the NEAR mission may be created by electrostatically-dominated dust transport. Previous attempts to numerically model dust motion on the Moon and Eros have been stymied by poorly understood dust launching mechanisms. As a result, the initial velocity and charge of dust particles used in numerical simulations may or may not have any relevance to the actual conditions occurring in situ. It has been seen that properly tuned initial states (velocity and charge) result in dust particles levitating above the surface in both 1D and 2D simulations. Levitation is of interest to planetary scientists since it provides a way to quickly redistribute the surface dust particles over a body. However, there is currently no method to predict whether or not a certain initial state will result in levitation. We have developed a method to provide constraints on the initial states that result in levitation as a function of dust particle size and central body gravity. Additionally, our method can be applied to several models of the plasma sheath. Thus, we limit the guesswork involved in determining which initial conditions result in levitation. We provide a more detailed understanding of levitation phenomena couched in terms of the commonly recognized spring-mass system. This method of understanding dust motion removes the dependency on the launching mechanism, which remains fraught with controversy. Once a feasible dust launching mechanism is identified (be it micrometeoroid bombardment or electrostatic lofting), our method will allow the community to quickly ascertain if dust levitation will occur in situ or if it is simply a numerical artifact. In addition to
Grid Cell Responses in 1D Environments Assessed as Slices through a 2D Lattice.
Yoon, KiJung; Lewallen, Sam; Kinkhabwala, Amina A; Tank, David W; Fiete, Ila R
2016-03-01
Grid cells, defined by their striking periodic spatial responses in open 2D arenas, appear to respond differently on 1D tracks: the multiple response fields are not periodically arranged, peak amplitudes vary across fields, and the mean spacing between fields is larger than in 2D environments. We ask whether such 1D responses are consistent with the system's 2D dynamics. Combining analytical and numerical methods, we show that the 1D responses of grid cells with stable 1D fields are consistent with a linear slice through a 2D triangular lattice. Further, the 1D responses of comodular cells are well described by parallel slices, and the offsets in the starting points of the 1D slices can predict the measured 2D relative spatial phase between the cells. From these results, we conclude that the 2D dynamics of these cells is preserved in 1D, suggesting a common computation during both types of navigation behavior. PMID:26898777
Preparation of 1D nanostructures using biomolecules
NASA Astrophysics Data System (ADS)
Pruneanu, Stela; Olenic, Liliana; Barbu Tudoran, Lucian; Kacso, Irina; Farha Al-Said, Said A.; Hassanien, Reda; Houlton, Andrew; Horrocks, Benjamin R.
2009-08-01
In this paper we have shown that one-dimensional (1D) particle arrays can be obtained using biomolecules, like DNA or amino-acids. Nano-arrays of silver and gold were prepared in a single-step synthesis, by exploiting the binding abilities of λ-DNA and L-Arginine. The morphology and optical properties of these nanostructures were investigated using AFM, TEM and UV-Vis absorption spectroscopy.
1D design style implications for mask making and CEBL
NASA Astrophysics Data System (ADS)
Smayling, Michael C.
2013-09-01
At advanced nodes, CMOS logic is being designed in a highly regular design style because of the resolution limitations of optical lithography equipment. Logic and memory layouts using 1D Gridded Design Rules (GDR) have been demonstrated to nodes beyond 12nm.[1-4] Smaller nodes will require the same regular layout style but with multiple patterning for critical layers. One of the significant advantages of 1D GDR is the ease of splitting layouts into lines and cuts. A lines and cuts approach has been used to achieve good pattern fidelity and process margin to below 12nm.[4] Line scaling with excellent line-edge roughness (LER) has been demonstrated with self-aligned spacer processing.[5] This change in design style has important implications for mask making: • The complexity of the masks will be greatly reduced from what would be required for 2D designs with very complex OPC or inverse lithography corrections. • The number of masks will initially increase, as for conventional multiple patterning. But in the case of 1D design, there are future options for mask count reduction. • The line masks will remain simple, with little or no OPC, at pitches (1x) above 80nm. This provides an excellent opportunity for continual improvement of line CD and LER. The line pattern will be processed through a self-aligned pitch division sequence to divide pitch by 2 or by 4. • The cut masks can be done with "simple OPC" as demonstrated to beyond 12nm.[6] Multiple simple cut masks may be required at advanced nodes. "Coloring" has been demonstrated to below 12nm for two colors and to 8nm for three colors. • Cut/hole masks will eventually be replaced by e-beam direct write using complementary e-beam lithography (CEBL).[7-11] This transition is gated by the availability of multiple column e-beam systems with throughput adequate for high- volume manufacturing. A brief description of 1D and 2D design styles will be presented, followed by examples of 1D layouts. Mask complexity for 1
Centrosome Positioning in 1D Cell Migration
NASA Astrophysics Data System (ADS)
Adlerz, Katrina; Aranda-Espinoza, Helim
During cell migration, the positioning of the centrosome and nucleus define a cell's polarity. For a cell migrating on a two-dimensional substrate the centrosome is positioned in front of the nucleus. Under one-dimensional confinement, however, the centrosome is positioned behind the nucleus in 60% of cells. It is known that the centrosome is positioned by CDC42 and dynein for cells moving on a 2D substrate in a wound-healing assay. It is currently unknown, however, if this is also true for cells moving under 1D confinement, where the centrosome position is often reversed. Therefore, centrosome positioning was studied in cells migrating under 1D confinement, which mimics cells migrating through 3D matrices. 3 to 5 μm fibronectin lines were stamped onto a glass substrate and cells with fluorescently labeled nuclei and centrosomes migrated on the lines. Our results show that when a cell changes directions the centrosome position is maintained. That is, when the centrosome is between the nucleus and the cell's trailing edge and the cell changes direction, the centrosome will be translocated across the nucleus to the back of the cell again. A dynein inhibitor did have an influence on centrosome positioning in 1D migration and change of directions.
Coalescence phenomena in 1D silver nanostructures
NASA Astrophysics Data System (ADS)
Gutiérrez-Wing, C.; Pérez-Alvarez, M.; Mondragón-Galicia, G.; Arenas-Alatorre, J.; Gutiérrez-Wing, M. T.; Henk, M. C.; Negulescu, I. I.; Rusch, K. A.
2009-07-01
Different coalescence processes on 1D silver nanostructures synthesized by a PVP assisted reaction in ethylene glycol at 160 °C were studied experimentally and theoretically. Analysis by TEM and HRTEM shows different defects found on the body of these materials, suggesting that they were induced by previous coalescence processes in the synthesis stage. TEM observations showed that irradiation with the electron beam eliminates the boundaries formed near the edges of the structures, suggesting that this process can be carried out by the application of other means of energy (i.e. thermal). These results were also confirmed by theoretical calculations by Monte Carlo simulations using a Sutton-Chen potential. A theoretical study by molecular dynamics simulation of the different coalescence processes on 1D silver nanostructures is presented, showing a surface energy driven sequence followed to form the final coalesced structure. Calculations were made at 1000-1300 K, which is near the melting temperature of silver (1234 K). Based on these results, it is proposed that 1D nanostructures can grow through a secondary mechanism based on coalescence, without losing their dimensionality.
Forgy, Charles C.; Mazziotti, David A.
2014-12-14
Recent studies have indicated that environmental noise may increase energy-transfer efficiency in quantum systems. For homogeneous networks of chromophores previous studies have primarily considered excitonic transport in one-dimensional (linear) networks. In our study, we expand previous research to a two-dimensional fully coupled topology of chromophore molecules. We demonstrate that not only does an optimal dephasing rate exist in both one- and two-dimensional networks but also that it increases in magnitude with increasing coupling strength between chromophores. Optimal transport occurs when the noise quenches the entanglement between local modes that prevent the exciton from moving efficiently to the target site. We find that these results are insensitive to minor site defects such as those found in realistic systems. We contrast these findings to systems with a high degree of inhomogeneity, in which the optimal dephasing rate is largely set by the system topology and does not vary significantly with respect to coupling strength. Our findings have potential applications to systems such as quantum dot arrays and carbon nanotube structures.
NASA Astrophysics Data System (ADS)
Tignanelli, H. L.; Vazquez, R. A.; Mostaccio, C.; Gordillo, S.; Plastino, A.
1990-11-01
RESUMEN. Presentamos una metodologia de analisis de la homogeneidad a partir de la Teoria de la Informaci6n, aplicable a muestras de datos observacionales. ABSTRACT:Standard concepts that underlie Information Theory are employed in order design a methodology that enables one to analyze the homogeneity of a given data sample. Key : DATA ANALYSIS
NASA Astrophysics Data System (ADS)
Loewen, M.; Bindeman, I. N.; Befus, K. S.
2014-12-01
The 250-79 ka Central Plateau Member CPM) rhyolites are represented mostly by large volume lava flows with less than 10% crystals and are the youngest eruptive products inside of the 620 ka Yellowstone Caldera, formed after eruption of Lava Creek Tuff (LCT). These flows are low-δ18O requiring tens of percent of shallowly remelted hydrothermally-altered material and provide evidence into how large silicic magma systems evolve before and after major caldera-forming cycles. We have developed a technique to directly analyze small micro-domains of rhyolite glass for precise (better than 0.1 ‰) δ18O determination coupled with D/H, [H2O], trace elements, and Pb isotopes. We present evidence for striking δ18O homogeneity (4.48 ± 0.12 ‰, 2 standard deviations of all analyses) both across small (1 km3) and large (up to 70 km3) flows and between flows erupted over almost 200 ka. D/H analyses in the glasses are highly degassed and are not affected by secondary hydration (H2O = 0.05 to 0.28 wt. %, δD = -99 to -171 ‰). Trace element analyses show broad temporal compositional evolution consistent with increasing feldspar fractionation over time: the oldest Scaup Lake flow contains 8 ppm Sr, 330 ppm Rb, and 270 ppm Ba to the youngest Pitchstone Plateau flow contains 0.7-1.9 ppm Sr, 180-250 ppm Rb, 18-25 ppm Ba. We also show small but recognizable trace element heterogeneity within lava flows unrelated to long-term geochemical trends. Homogeneity of oxygen in melt from individual lava flows across the LCT caldera is consistent with convective homogenization of a large magma body generated by remelting of post and pre LCT hydrothermally-altered and likely highly variable, low- δ18O rocks. In combination with trace element data we show that the CPM rhyolites have also undergone a broad, caldera-wide differentiation trend with no evidence for significant recharge. We are reconciling diverse geochemical data streams to develop a comprehensive petrologic model for the
Substrate specificity and inhibitor analyses of human steroid 5β-reductase (AKR1D1)
Chen, Mo; Drury, Jason E.; Penning, Trevor M.
2011-01-01
Human steroid 5β-reductase (Aldo-keto Reductase 1D1) catalyzes the stereospecific NADPH-dependent reduction of the C4-C5 double bond of Δ4-ketosteroids to yield an A/B cis-ring junction. This cis-configuration is crucial for bile acid biosynthesis and plays important roles in steroid metabolism. The biochemical properties of the enzyme have not been thoroughly studied and conflicting data have been reported, partially due to the lack of highly homogeneous protein. In the present study, we systematically determined the substrate specificity of homogeneous human recombinant AKR1D1 using C18, C19, C21, and C27 Δ4-ketosteroids and assessed the pH-rate dependence of the enzyme. Our results show that AKR1D1 proficiently reduced all the steroids tested at physiological pH, indicating AKR1D1 is the only enzyme necessary for all the 5β-steroid metabolite present in humans. Substrate inhibition was observed with C18 to C21 steroids provided that the side-chain at C17 was unsubstituted. This structure activity relationship can be explained by the existence of a small alternative substrate binding pocket revealed by the AKR1D1 crystal structure. Non-steroidal anti-inflammatory drugs which are potent inhibitors of the related AKR1C enzymes do not inhibit AKR1D1 by contrast chenodeoxycholate and ursodeoxycholate were found to be potent non-competitive inhibitors suggesting that bile-acids may regulate their own synthesis at the level of AKR1D1 inhibition. PMID:21255593
Multifractal spectra in homogeneous shear flow
NASA Technical Reports Server (NTRS)
Deane, A. E.; Keefe, L. R.
1988-01-01
Employing numerical simulations of 3-D homogeneous shear flow, the associated multifractal spectra of the energy dissipation, scalar dissipation and vorticity fields were calculated. The results for (128) cubed simulations of this flow, and those obtained in recent experiments that analyzed 1- and 2-D intersections of atmospheric and laboratory flows, are in some agreement. A two-scale Cantor set model of the energy cascade process which describes the experimental results from 1-D intersections quite well, describes the 3-D results only marginally.
1-D EQUILIBRIUM DISCRETE DIFFUSION MONTE CARLO
T. EVANS; ET AL
2000-08-01
We present a new hybrid Monte Carlo method for 1-D equilibrium diffusion problems in which the radiation field coexists with matter in local thermodynamic equilibrium. This method, the Equilibrium Discrete Diffusion Monte Carlo (EqDDMC) method, combines Monte Carlo particles with spatially discrete diffusion solutions. We verify the EqDDMC method with computational results from three slab problems. The EqDDMC method represents an incremental step toward applying this hybrid methodology to non-equilibrium diffusion, where it could be simultaneously coupled to Monte Carlo transport.
A 1-D dusty plasma photonic crystal
Mitu, M. L.; Ticoş, C. M.; Toader, D.; Banu, N.; Scurtu, A.
2013-09-21
It is demonstrated numerically that a 1-D plasma crystal made of micron size cylindrical dust particles can, in principle, work as a photonic crystal for terahertz waves. The dust rods are parallel to each other and arranged in a linear string forming a periodic structure of dielectric-plasma regions. The dispersion equation is found by solving the waves equation with the boundary conditions at the dust-plasma interface and taking into account the dielectric permittivity of the dust material and plasma. The wavelength of the electromagnetic waves is in the range of a few hundred microns, close to the interparticle separation distance. The band gaps of the 1-D plasma crystal are numerically found for different types of dust materials, separation distances between the dust rods and rod diameters. The distance between levitated dust rods forming a string in rf plasma is shown experimentally to vary over a relatively wide range, from 650 μm to about 1350 μm, depending on the rf power fed into the discharge.
Strictly homogeneous laterally complete modules
NASA Astrophysics Data System (ADS)
Chilin, V. I.; Karimov, J. A.
2016-03-01
Let A be a laterally complete commutative regular algebra and X be a laterally complete A-module. In this paper we introduce a notion of homogeneous and strictly homogeneous A-modules. It is proved that any homogeneous A-module is strictly homogeneous A-module, if the Boolean algebra of all idempotents in A is multi-σ-finite.
EXTENSION OF THE 1D FOUR-GROUP ANALYTIC NODAL METHOD TO FULL MULTIGROUP
B. D. Ganapol; D. W. Nigg
2008-09-01
In the mid 80’s, a four-group/two-region, entirely analytical 1D nodal benchmark appeared. It was readily acknowledged that this special case was as far as one could go in terms of group number and still achieve an analytical solution. In this work, we show that by decomposing the solution to the multigroup diffusion equation into homogeneous and particular solutions, extension to any number of groups is a relatively straightforward exercise using the mathematics of linear algebra.
Endogenous N-terminal Domain Cleavage Modulates α1D-Adrenergic Receptor Pharmacodynamics.
Kountz, Timothy S; Lee, Kyung-Soon; Aggarwal-Howarth, Stacey; Curran, Elizabeth; Park, Ji-Min; Harris, Dorathy-Ann; Stewart, Aaron; Hendrickson, Joseph; Camp, Nathan D; Wolf-Yadlin, Alejandro; Wang, Edith H; Scott, John D; Hague, Chris
2016-08-26
The α1D-adrenergic receptor (ADRA1D) is a key regulator of cardiovascular, prostate, and central nervous system functions. This clinically relevant G protein-coupled receptor has proven difficult to study, as it must form an obligate modular homodimer containing the PDZ proteins scribble and syntrophin or become retained in the endoplasmic reticulum as non-functional protein. We previously determined that targeted removal of the N-terminal (NT) 79 amino acids facilitates ADRA1D plasma membrane expression and agonist-stimulated functional responses. However, whether such an event occurs in physiological contexts was unknown. Herein, we report the ADRA1D is subjected to innate NT processing in cultured human cells. SNAP near-infrared imaging and tandem-affinity purification revealed the ADRA1D is expressed as both full-length and NT truncated forms in multiple human cell lines. Serial truncation mapping identified the cleavage site as Leu(90)/Val(91) in the 95-amino acid ADRA1D NT domain, suggesting human cells express a Δ1-91 ADRA1D species. Tandem-affinity purification MS/MS and co-immunoprecipitation analysis indicate NT processing of ADRA1D is not required to form scribble-syntrophin macromolecular complexes. Yet, label-free dynamic mass redistribution signaling assays demonstrate that Δ1-91 ADRA1D agonist responses were greater than WT ADRA1D. Mutagenesis of the cleavage site nullified the processing event, resulting in ADRA1D agonist responses less than the WT receptor. Thus, we propose that processing of the ADRA1D NT domain is a physiological mechanism employed by cells to generate a functional ADRA1D isoform with optimal pharmacodynamic properties. PMID:27382054
Homogeneous and inhomogeneous eddies
Pavia, E.G.
1994-12-31
This work deals with mesoscale warm oceanic eddies; i.e., self-contained bodies of water which transport heat, among other things, for several months and for several hundreds of kilometers. This heat transport is believed to play an important role in the atmospheric and oceanic conditions of the region where it is being transported. Here the author examines the difference in evolution between eddies modeled as blobs of homogeneous water and eddies in which density varies in the horizontal. Preliminary results suggest that instability is enhanced by inhomogeneities, which would imply that traditional modeling studies, based on homogeneous vortices have underestimated the rate of heat-release from oceanic eddies to the surroundings. The approach is modeling in the simplest form; i.e., one single active layer. Although previous studies have shown the drastic effect on stability brought by two or more dynamically-relevant homogeneous layers, the author believes the single-layer eddy-model has not been investigated thoroughly.
Full Waveform 3D Synthetic Seismic Algorithm for 1D Layered Anelastic Models
NASA Astrophysics Data System (ADS)
Schwaiger, H. F.; Aldridge, D. F.; Haney, M. M.
2007-12-01
Numerical calculation of synthetic seismograms for 1D layered earth models remains a significant aspect of amplitude-offset investigations, surface wave studies, microseismic event location approaches, and reflection interpretation or inversion processes. Compared to 3D finite-difference algorithms, memory demand and execution time are greatly reduced, enabling rapid generation of seismic data within workstation or laptop computational environments. We have developed a frequency-wavenumber forward modeling algorithm adapted to realistic 1D geologic media, for the purpose of calculating seismograms accurately and efficiently. The earth model consists of N layers bounded by two halfspaces. Each layer/halfspace is a homogeneous and isotropic anelastic (attenuative and dispersive) solid, characterized by a rectangular relaxation spectrum of absorption mechanisms. Compressional and shear phase speeds and quality factors are specified at a particular reference frequency. Solution methodology involves 3D Fourier transforming the three coupled, second- order, integro-differential equations for particle displacements to the frequency-horizontal wavenumber domain. An analytic solution of the resulting ordinary differential system is obtained. Imposition of welded interface conditions (continuity of displacement and stress) at all interfaces, as well as radiation conditions in the two halfspaces, yields a system of 6(N+1) linear algebraic equations for the coefficients in the ODE solution. An optimized inverse 2D Fourier transform to the space domain gives the seismic wavefield on a horizontal plane. Finally, three-component seismograms are obtained by accumulating frequency spectra at designated receiver positions on this plane, followed by a 1D inverse FFT from angular frequency ω to time. Stress-free conditions may be applied at the top or bottom interfaces, and seismic waves are initiated by force or moment density sources. Examples reveal that including attenuation
Development of 1D Liner Compression Code for IDL
NASA Astrophysics Data System (ADS)
Shimazu, Akihisa; Slough, John; Pancotti, Anthony
2015-11-01
A 1D liner compression code is developed to model liner implosion dynamics in the Inductively Driven Liner Experiment (IDL) where FRC plasmoid is compressed via inductively-driven metal liners. The driver circuit, magnetic field, joule heating, and liner dynamics calculations are performed at each time step in sequence to couple these effects in the code. To obtain more realistic magnetic field results for a given drive coil geometry, 2D and 3D effects are incorporated into the 1D field calculation through use of correction factor table lookup approach. Commercial low-frequency electromagnetic fields solver, ANSYS Maxwell 3D, is used to solve the magnetic field profile for static liner condition at various liner radius in order to derive correction factors for the 1D field calculation in the code. The liner dynamics results from the code is verified to be in good agreement with the results from commercial explicit dynamics solver, ANSYS Explicit Dynamics, and previous liner experiment. The developed code is used to optimize the capacitor bank and driver coil design for better energy transfer and coupling. FRC gain calculations are also performed using the liner compression data from the code for the conceptual design of the reactor sized system for fusion energy gains.
Shimizu, Y.
2001-01-11
This report provides computational results of an extensive study to examine the following: (1) infinite media neutron-multiplication factors; (2) material bucklings; (3) bounding infinite media critical concentrations; (4) bounding finite critical dimensions of water-reflected and homogeneously water-moderated one-dimensional systems (i.e., spheres, cylinders of infinite length, and slabs that are infinite in two dimensions) that were comprised of various proportions and densities of plutonium oxides and uranium oxides, each having various isotopic compositions; and (5) sensitivity coefficients of delta k-eff with respect to critical geometry delta dimensions were determined for each of the three geometries that were studied. The study was undertaken to support the development of a standard that is sponsored by the International Standards Organization (ISO) under Technical Committee 85, Nuclear Energy (TC 85)--Subcommittee 5, Nuclear Fuel Technology (SC 5)--Working Group 8, Standardization of Calculations, Procedures and Practices Related to Criticality Safety (WG 8). The designation and title of the ISO TC 85/SC 5/WG 8 standard working draft is WD 14941, ''Nuclear energy--Fissile materials--Nuclear criticality control and safety of plutonium-uranium oxide fuel mixtures outside of reactors.'' Various ISO member participants performed similar computational studies using their indigenous computational codes to provide comparative results for analysis in the development of the standard.
NASA Astrophysics Data System (ADS)
Briane, M.; Casado Díaz, J.
2016-04-01
In this paper a new div-curl result is established in an open set Ω of RN, N ≥ 2, for the product σn ṡηn of two sequences of vector-valued functions σn, ηn such that σn is bounded in Lp(Ω) N, ηn is bounded in Lq(Ω) N, with 1 / p + 1 / q = 1 + 1 / (N - 1), and such that divσn, curlηn are compact in suitable spaces. The new assumption is that the product converges weakly in W - 1 , 1 (Ω). The approach is also new in the topic, and is based on a compactness result for bounded sequences in W 1 , q (Ω) through a suitable selection of annuli on which the gradients are not too high, in the spirit of [26,32] and using the imbedding of W 1 , q into Lp‧ for the unit sphere of RN. The div-curl result is applied to the homogenization of equi-coercive systems whose coefficients are equi-bounded in Lρ (Ω) for some ρ >N-1/2 if N > 2, or in L1 (Ω) if N = 2. It also allows us to prove a weak continuity result for the Jacobian for bounded sequences in W 1 , N - 1 (Ω) satisfying an alternative assumption to the L∞-strong estimate of [8]. Two examples show the sharpness of the results.
NASA Astrophysics Data System (ADS)
Briane, M.; Casado Díaz, J.
2016-04-01
In this paper a new div-curl result is established in an open set Ω of RN, N ≥ 2, for the product σn ṡηn of two sequences of vector-valued functions σn, ηn such that σn is bounded in Lp(Ω) N, ηn is bounded in Lq(Ω) N, with 1 / p + 1 / q = 1 + 1 / (N - 1), and such that divσn, curlηn are compact in suitable spaces. The new assumption is that the product converges weakly in W - 1 , 1 (Ω). The approach is also new in the topic, and is based on a compactness result for bounded sequences in W 1 , q (Ω) through a suitable selection of annuli on which the gradients are not too high, in the spirit of [26,32] and using the imbedding of W 1 , q into Lp‧ for the unit sphere of RN. The div-curl result is applied to the homogenization of equi-coercive systems whose coefficients are equi-bounded in Lρ (Ω) for some ρ >N - 1/2 if N > 2, or in L1 (Ω) if N = 2. It also allows us to prove a weak continuity result for the Jacobian for bounded sequences in W 1 , N - 1 (Ω) satisfying an alternative assumption to the L∞-strong estimate of [8]. Two examples show the sharpness of the results.
Layout optimization using the homogenization method
NASA Technical Reports Server (NTRS)
Suzuki, Katsuyuki; Kikuchi, Noboru
1993-01-01
A generalized layout problem involving sizing, shape, and topology optimization is solved by using the homogenization method for three-dimensional linearly elastic shell structures in order to seek a possibility of establishment of an integrated design system of automotive car bodies, as an extension of the previous work by Bendsoe and Kikuchi. A formulation of a three-dimensional homogenized shell, a solution algorithm, and several examples of computing the optimum layout are presented in this first part of the two articles.
Layout optimization using the homogenization method
NASA Astrophysics Data System (ADS)
Suzuki, Katsuyuki; Kikuchi, Noboru
A generalized layout problem involving sizing, shape, and topology optimization is solved by using the homogenization method for three-dimensional linearly elastic shell structures in order to seek a possibility of establishment of an integrated design system of automotive car bodies, as an extension of the previous work by Bendsoe and Kikuchi. A formulation of a three-dimensional homogenized shell, a solution algorithm, and several examples of computing the optimum layout are presented in this first part of the two articles.
Deforestation homogenizes tropical parasitoid-host networks.
Laliberté, Etienne; Tylianakis, Jason M
2010-06-01
Human activities drive biotic homogenization (loss of regional diversity) of many taxa. However, whether species interaction networks (e.g., food webs) can also become homogenized remains largely unexplored. Using 48 quantitative parasitoid-host networks replicated through space and time across five tropical habitats, we show that deforestation greatly homogenized network structure at a regional level, such that interaction composition became more similar across rice and pasture sites compared with forested habitats. This was not simply caused by altered consumer and resource community composition, but was associated with altered consumer foraging success, such that parasitoids were more likely to locate their hosts in deforested habitats. Furthermore, deforestation indirectly homogenized networks in time through altered mean consumer and prey body size, which decreased in deforested habitats. Similar patterns were obtained with binary networks, suggesting that interaction (link) presence-absence data may be sufficient to detect network homogenization effects. Our results show that tropical agroforestry systems can support regionally diverse parasitoid-host networks, but that removal of canopy cover greatly homogenizes the structure of these networks in space, and to a lesser degree in time. Spatiotemporal homogenization of interaction networks may alter coevolutionary outcomes and reduce ecological resilience at regional scales, but may not necessarily be predictable from community changes observed within individual trophic levels. PMID:20583715
NASA Astrophysics Data System (ADS)
Ahmad, R.
2016-07-01
This article reports an unbiased analysis for the water based rod shaped alumina nanoparticles by considering both the homogeneous and non-homogeneous nanofluid models over the coupled nanofluid-surface interface. The mechanics of the surface are found for both the homogeneous and non-homogeneous models, which were ignored in previous studies. The viscosity and thermal conductivity data are implemented from the international nanofluid property benchmark exercise. All the simulations are being done by using the experimentally verified results. By considering the homogeneous and non-homogeneous models, the precise movement of the alumina nanoparticles over the surface has been observed by solving the corresponding system of differential equations. For the non-homogeneous model, a uniform temperature and nanofluid volume fraction are assumed at the surface, and the flux of the alumina nanoparticle is taken as zero. The assumption of zero nanoparticle flux at the surface makes the non-homogeneous model physically more realistic. The differences of all profiles for both the homogeneous and nonhomogeneous models are insignificant, and this is due to small deviations in the values of the Brownian motion and thermophoresis parameters.
Núñez, Eutimio Gustavo Fernández; Leme, Jaci; de Almeida Parizotto, Letícia; Chagas, Wagner Antonio; de Rezende, Alexandre Gonçalves; da Costa, Bruno Labate Vale; Monteiro, Daniela Cristina Ventini; Boldorini, Vera Lucia Lopes; Jorge, Soraia Attie Calil; Astray, Renato Mancini; Pereira, Carlos Augusto; Caricati, Celso Pereira; Tonso, Aldo
2014-08-01
This work focused on determining the effect of dissolved oxygen concentration (DO) on growth and metabolism of BHK-21 cell line (host cell for recombinant proteins manufacturing and viral vaccines) cultured in two stirred tank bioreactors with different aeration-homogenization systems, as well as pH control mode. BHK-21 cell line adapted to single-cell suspension was cultured in Celligen without aeration cage (rotating gas-sparger) and Bioflo 110, at 10, 30 and 50 % air saturation (impeller for gas dispersion from sparger-ring). The pH was controlled at 7.2 as far as it was possible with gas mixtures. In other runs, at 30 and 50 % (DO) in Bioflo 110, the cells grew at pH controlled with CO2 and NaHCO3 solution. Glucose, lactate, glutamine, and ammonium were quantified by enzymatic methods. Cell concentration, size and specific oxygen consumption were also determined. When NaHCO3 solution was not used, the optimal DOs were 10 and 50 % air saturation for Celligen and Bioflo 110, respectively. In this condition maximum cell concentrations were higher than 4 × 10(6) cell/mL. An increase in maximum cell concentration of 36 % was observed in batch carried out at 30 % air saturation in a classical stirred tank bioreactor (Bioflo 110) with base solution addition. The optimal parameters defined in this work allow for bioprocess developing of viral vaccines, transient protein expression and viral vector for gene therapy based on BHK-21 cell line in two stirred tank bioreactors with different agitation-aeration systems. PMID:23846480
Structural stability of a 1D compressible viscoelastic fluid model
NASA Astrophysics Data System (ADS)
Huo, Xiaokai; Yong, Wen-An
2016-07-01
This paper is concerned with a compressible viscoelastic fluid model proposed by Öttinger. Although the model has a convex entropy, the Hessian matrix of the entropy does not symmetrize the system of first-order partial differential equations due to the non-conservative terms in the constitutive equation. We show that the corresponding 1D model is symmetrizable hyperbolic and dissipative and satisfies the Kawashima condition. Based on these, we prove the global existence of smooth solutions near equilibrium and justify the compatibility of the model with the Navier-Stokes equations.
Engineered atom-light interactions in 1D photonic crystals
NASA Astrophysics Data System (ADS)
Martin, Michael J.; Hung, Chen-Lung; Yu, Su-Peng; Goban, Akihisa; Muniz, Juan A.; Hood, Jonathan D.; Norte, Richard; McClung, Andrew C.; Meenehan, Sean M.; Cohen, Justin D.; Lee, Jae Hoon; Peng, Lucas; Painter, Oskar; Kimble, H. Jeff
2014-05-01
Nano- and microscale optical systems offer efficient and scalable quantum interfaces through enhanced atom-field coupling in both resonators and continuous waveguides. Beyond these conventional topologies, new opportunities emerge from the integration of ultracold atomic systems with nanoscale photonic crystals. One-dimensional photonic crystal waveguides can be engineered for both stable trapping configurations and strong atom-photon interactions, enabling novel cavity QED and quantum many-body systems, as well as distributed quantum networks. We present the experimental realization of such a nanophotonic quantum interface based on a nanoscale photonic crystal waveguide, demonstrating a fractional waveguide coupling of Γ1 D /Γ' of 0 . 32 +/- 0 . 08 , where Γ1 D (Γ') is the atomic emission rate into the guided (all other) mode(s). We also discuss progress towards intra-waveguide trapping of ultracold Cs. This work was supported by the IQIM, an NSF Physics Frontiers Center with support from the Moore Foundation, the DARPA ORCHID program, the AFOSR QuMPASS MURI, the DoD NSSEFF program, NSF, and the Kavli Nanoscience Institute (KNI) at Caltech.
NASA Astrophysics Data System (ADS)
Yuan, Jiuchuang; He, Di; Chen, Maodu
2015-10-01
We constructed a new global potential energy surface (PES) for the electronic ground state (1A‧) of H2S based on 21,300 accurate ab initio energy points over a large configuration space. The ab initio energies are obtained from multireference configuration interaction calculations with a Davidson correction using basis sets of quadruple zeta quality. The neural network method is applied to fit the PES, and the root mean square error of fitting is small (1.68 meV). Time-dependent wave packet studies for the S(1D) + H2(X1Σg+) → H(2S) + SH(X2Π) reaction on the new PES are conducted to study the reaction dynamics. The calculated integral cross sections decrease with increasing collision energy and remain fairly constant within the high collision energy range. Both forward and backward scatterings can be observed as expected for a barrierless reaction with a deep well on the PES. The calculated integral cross sections and differential cross sections are in good agreement with the experimental results.
Yuan, Jiuchuang; He, Di; Chen, Maodu
2015-01-01
We constructed a new global potential energy surface (PES) for the electronic ground state ((1)A') of H2S based on 21,300 accurate ab initio energy points over a large configuration space. The ab initio energies are obtained from multireference configuration interaction calculations with a Davidson correction using basis sets of quadruple zeta quality. The neural network method is applied to fit the PES, and the root mean square error of fitting is small (1.68 meV). Time-dependent wave packet studies for the S((1)D) + H2(X(1)Σg(+)) → H((2)S) + SH(X(2)Π) reaction on the new PES are conducted to study the reaction dynamics. The calculated integral cross sections decrease with increasing collision energy and remain fairly constant within the high collision energy range. Both forward and backward scatterings can be observed as expected for a barrierless reaction with a deep well on the PES. The calculated integral cross sections and differential cross sections are in good agreement with the experimental results. PMID:26435516
Yuan, Jiuchuang; He, Di; Chen, Maodu
2015-01-01
We constructed a new global potential energy surface (PES) for the electronic ground state (1A′) of H2S based on 21,300 accurate ab initio energy points over a large configuration space. The ab initio energies are obtained from multireference configuration interaction calculations with a Davidson correction using basis sets of quadruple zeta quality. The neural network method is applied to fit the PES, and the root mean square error of fitting is small (1.68 meV). Time-dependent wave packet studies for the S(1D) + H2(X1Σg+) → H(2S) + SH(X2Π) reaction on the new PES are conducted to study the reaction dynamics. The calculated integral cross sections decrease with increasing collision energy and remain fairly constant within the high collision energy range. Both forward and backward scatterings can be observed as expected for a barrierless reaction with a deep well on the PES. The calculated integral cross sections and differential cross sections are in good agreement with the experimental results. PMID:26435516
Homogeneous quantum electrodynamic turbulence
NASA Technical Reports Server (NTRS)
Shebalin, John V.
1992-01-01
The electromagnetic field equations and Dirac equations for oppositely charged wave functions are numerically time-integrated using a spatial Fourier method. The numerical approach used, a spectral transform technique, is based on a continuum representation of physical space. The coupled classical field equations contain a dimensionless parameter which sets the strength of the nonlinear interaction (as the parameter increases, interaction volume decreases). For a parameter value of unity, highly nonlinear behavior in the time-evolution of an individual wave function, analogous to ideal fluid turbulence, is observed. In the truncated Fourier representation which is numerically implemented here, the quantum turbulence is homogeneous but anisotropic and manifests itself in the nonlinear evolution of equilibrium modal spatial spectra for the probability density of each particle and also for the electromagnetic energy density. The results show that nonlinearly interacting fermionic wave functions quickly approach a multi-mode, dynamic equilibrium state, and that this state can be determined by numerical means.
Hammond, R.P.; Busey, H.M.
1959-02-17
Nuclear reactors of the homogeneous liquid fuel type are discussed. The reactor is comprised of an elongated closed vessel, vertically oriented, having a critical region at the bottom, a lower chimney structure extending from the critical region vertically upwardly and surrounded by heat exchanger coils, to a baffle region above which is located an upper chimney structure containing a catalyst functioning to recombine radiolyticallydissociated moderator gages. In operation the liquid fuel circulates solely by convection from the critical region upwardly through the lower chimney and then downwardly through the heat exchanger to return to the critical region. The gases formed by radiolytic- dissociation of the moderator are carried upwardly with the circulating liquid fuel and past the baffle into the region of the upper chimney where they are recombined by the catalyst and condensed, thence returning through the heat exchanger to the critical region.
Homogeneous quantum electrodynamic turbulence
Shebalin, J.V.
1992-10-01
The electromagnetic field equations and Dirac equations for oppositely charged wave functions are numerically time-integrated using a spatial Fourier method. The numerical approach used, a spectral transform technique, is based on a continuum representation of physical space. The coupled classical field equations contain a dimensionless parameter which sets the strength of the nonlinear interaction (as the parameter increases, interaction volume decreases). For a parameter value of unity, highly nonlinear behavior in the time-evolution of an individual wave function, analogous to ideal fluid turbulence, is observed. In the truncated Fourier representation which is numerically implemented here, the quantum turbulence is homogeneous but anisotropic and manifests itself in the nonlinear evolution of equilibrium modal spatial spectra for the probability density of each particle and also for the electromagnetic energy density. The results show that nonlinearly interacting fermionic wave functions quickly approach a multi-mode, dynamic equilibrium state, and that this state can be determined by numerical means.
Benchmarks and models for 1-D radiation transport in stochastic participating media
Miller, D S
2000-08-21
Benchmark calculations for radiation transport coupled to a material temperature equation in a 1-D slab and 1-D spherical geometry binary random media are presented. The mixing statistics are taken to be homogeneous Markov statistics in the 1-D slab but only approximately Markov statistics in the 1-D sphere. The material chunk sizes are described by Poisson distribution functions. The material opacities are first taken to be constant and then allowed to vary as a strong function of material temperature. Benchmark values and variances for time evolution of the ensemble average of material temperature energy density and radiation transmission are computed via a Monte Carlo type method. These benchmarks are used as a basis for comparison with three other approximate methods of solution. One of these approximate methods is simple atomic mix. The second approximate model is an adaptation of what is commonly called the Levermore-Pomraning model and which is referred to here as the standard model. It is shown that recasting the temperature coupling as a type of effective scattering can be useful in formulating the third approximate model, an adaptation of a model due to Su and Pomraning which attempts to account for the effects of scattering in a stochastic context. This last adaptation shows consistent improvement over both the atomic mix and standard models when used in the 1-D slab geometry but shows limited improvement in the 1-D spherical geometry. Benchmark values are also computed for radiation transmission from the 1-D sphere without material heating present. This is to evaluate the performance of the standard model on this geometry--something which has never been done before. All of the various tests demonstrate the importance of stochastic structure on the solution. Also demonstrated are the range of usefulness and limitations of a simple atomic mix formulation.
Robertson, Wesley D; Bovell, Adonis M; Warncke, Kurt
2013-08-01
Components of a protein-integrated, earth-abundant metal macrocycle catalyst, with the purpose of H2 production from aqueous protons under green conditions, are characterized. The cobalt-corrin complex, cobinamide, is demonstrated to produce H2 (4.4 ± 1.8 × 10(-3) turnover number per hour) in a homogeneous, photosensitizer/sacrificial electron donor system in pure water at neutral pH. Turnover is proposed to be limited by the relatively low population of the gateway cobalt(III) hydride species. A heterolytic mechanism for H2 production from the cobalt(II) hydride is proposed. Two essential requirements for assembly of a functional protein-catalyst complex are demonstrated for interaction of cobinamide with the (βα)8 TIM barrel protein, EutB, from the adenosylcobalamin-dependent ethanolamine ammonia lyase from Salmonella typhimurium: (1) high-affinity equilibrium binding of the cobinamide (dissociation constant 2.1 × 10(-7) M) and (2) in situ photoreduction of the cobinamide-protein complex to the Co(I) state. Molecular modeling of the cobinamide-EutB interaction shows that these features arise from specific hydrogen-bond and apolar interactions of the protein with the alkylamide substituents and the ring of the corrin, and accessibility of the binding site to the solution. The results establish cobinamide-EutB as a platform for design and engineering of a robust H2 production metallocatalyst that operates under green conditions and uses the advantages of the protein as a tunable medium and material support. PMID:23807763
1D-1D Coulomb drag in a 6 Million Mobility Bi-layer Heterostructure
NASA Astrophysics Data System (ADS)
Bilodeau, Simon; Laroche, Dominique; Xia, Jian-Sheng; Lilly, Mike; Reno, John; Pfeiffer, Loren; West, Ken; Gervais, Guillaume
We report Coulomb drag measurements in vertically-coupled quantum wires. The wires are fabricated in GaAs/AlGaAs bilayer heterostructures grown from two different MBE chambers: one at Sandia National Laboratories (1.2M mobility), and the other at Princeton University (6M mobility). The previously observed positive and negative drag signals are seen in both types of devices, demonstrating the robustness of the result. However, attempts to determine the temperature dependence of the drag signal in the 1D regime proved challenging in the higher mobility heterostructure (Princeton), in part because of difficulties in aligning the wires within the same transverse subband configuration. Nevertheless, this work, performed at the Microkelvin laboratory of the University of Florida, is an important proof-of-concept for future investigations of the temperature dependence of the 1D-1D drag signal down to a few mK. Such an experiment could confirm the Luttinger charge density wave interlocking predicted to occur in the wires. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL8500.
2012-01-01
Background Reaction-diffusion based models have been widely used in the literature for modeling the growth of solid tumors. Many of the current models treat both diffusion/consumption of nutrients and cell proliferation. The majority of these models use classical transport/mass conservation equations for describing the distribution of molecular species in tumor spheroids, and the Fick's law for describing the flux of uncharged molecules (i.e oxygen, glucose). Commonly, the equations for the cell movement and proliferation are first order differential equations describing the rate of change of the velocity of the cells with respect to the spatial coordinates as a function of the nutrient's gradient. Several modifications of these equations have been developed in the last decade to explicitly indicate that the tumor includes cells, interstitial fluids and extracellular matrix: these variants provided a model of tumor as a multiphase material with these as the different phases. Most of the current reaction-diffusion tumor models are deterministic and do not model the diffusion as a local state-dependent process in a non-homogeneous medium at the micro- and meso-scale of the intra- and inter-cellular processes, respectively. Furthermore, a stochastic reaction-diffusion model in which diffusive transport of the molecular species of nutrients and chemotherapy drugs as well as the interactions of the tumor cells with these species is a novel approach. The application of this approach to he scase of non-small cell lung cancer treated with gemcitabine is also novel. Methods We present a stochastic reaction-diffusion model of non-small cell lung cancer growth in the specification formalism of the tool Redi, we recently developed for simulating reaction-diffusion systems. We also describe how a spatial gradient of nutrients and oncological drugs affects the tumor progression. Our model is based on a generalization of the Fick's first diffusion law that allows to model
Optical bullets in (2+1)D photonic structures and their interaction with localized defects
NASA Astrophysics Data System (ADS)
Dohnal, Tomas
2005-11-01
This dissertation studies light propagation in Kerr-nonlinear two dimensional waveguides with a Bragg resonant, periodic structure in the propagation direction. The model describing evolution of the electric field envelopes is the system of 2D Nonlinear Coupled Mode Equations (2D CME). The periodic structure induces a range of frequencies (frequency gap) in which linear waves do not propagate. It is shown that, similarly to the ID case of a fiber grating, the 2D nonlinear system supports localized solitary wave solutions, referred to as 2D gap solitons, which have frequencies inside the linear gap and can travel at, any speed smaller than or equal to the speed of light in the corresponding homogeneous medium. Such solutions are constructed numerically via Newton's iteration. Convergence is obtained only near the upper edge of the gap. Gap solitons with a nonzero velocity are constructed by numerically following a bifurcation curve parameterized by the velocity v. It is shown that gap solitons are saddle points of the corresponding Hamiltonian functional and that no (constrained) local minima of the Hamiltonian exist. The linear stability problem is formulated and reasons for the failure of the standard Hamiltonian PDE approach for determining linear stability are discussed. In the second part of the dissertation interaction of 2D gap solitons with localized defects is studied and trapping of slow enough 2D gap solitons is demonstrated. This study builds on [JOSA B 19, 1635 (2002)], where such trapping of 1D gap solitons is considered. Analogously to this 1D problem trapping in the 2D model is explained as a resonant energy transfer into one or more defect modes existent for the particular defect. For special localized defects exact linear modes are found explicitly via the separation of variables. Numerical computation of linear defect modes is used for more general defects. Corresponding nonlinear modes are then constructed via Newton's iteration by following a
A new general 1-D vadose zone flow solution method
NASA Astrophysics Data System (ADS)
Ogden, Fred L.; Lai, Wencong; Steinke, Robert C.; Zhu, Jianting; Talbot, Cary A.; Wilson, John L.
2015-06-01
We have developed an alternative to the one-dimensional partial differential equation (PDE) attributed to Richards (1931) that describes unsaturated porous media flow in homogeneous soil layers. Our solution is a set of three ordinary differential equations (ODEs) derived from unsaturated flux and mass conservation principles. We used a hodograph transformation, the Method of Lines, and a finite water-content discretization to produce ODEs that accurately simulate infiltration, falling slugs, and groundwater table dynamic effects on vadose zone fluxes. This formulation, which we refer to as "finite water-content", simulates sharp fronts and is guaranteed to conserve mass using a finite-volume solution. Our ODE solution method is explicitly integrable, does not require iterations and therefore has no convergence limits and is computationally efficient. The method accepts boundary fluxes including arbitrary precipitation, bare soil evaporation, and evapotranspiration. The method can simulate heterogeneous soils using layers. Results are presented in terms of fluxes and water content profiles. Comparing our method against analytical solutions, laboratory data, and the Hydrus-1D solver, we find that predictive performance of our finite water-content ODE method is comparable to or in some cases exceeds that of the solution of Richards' equation, with or without a shallow water table. The presented ODE method is transformative in that it offers accuracy comparable to the Richards (1931) PDE numerical solution, without the numerical complexity, in a form that is robust, continuous, and suitable for use in large watershed and land-atmosphere simulation models, including regional-scale models of coupled climate and hydrology.
Bernoulli convolutions and 1D dynamics
NASA Astrophysics Data System (ADS)
Kempton, Tom; Persson, Tomas
2015-10-01
We describe a family {φλ} of dynamical systems on the unit interval which preserve Bernoulli convolutions. We show that if there are parameter ranges for which these systems are piecewise convex, then the corresponding Bernoulli convolution will be absolutely continuous with bounded density. We study the systems {φλ} and give some numerical evidence to suggest values of λ for which {φλ} may be piecewise convex.
Blood flow quantification using 1D CFD parameter identification
NASA Astrophysics Data System (ADS)
Brosig, Richard; Kowarschik, Markus; Maday, Peter; Katouzian, Amin; Demirci, Stefanie; Navab, Nassir
2014-03-01
Patient-specific measurements of cerebral blood flow provide valuable diagnostic information concerning cerebrovascular diseases rather than visually driven qualitative evaluation. In this paper, we present a quantitative method to estimate blood flow parameters with high temporal resolution from digital subtraction angiography (DSA) image sequences. Using a 3D DSA dataset and a 2D+t DSA sequence, the proposed algorithm employs a 1D Computational Fluid Dynamics (CFD) model for estimation of time-dependent flow values along a cerebral vessel, combined with an additional Advection Diffusion Equation (ADE) for contrast agent propagation. The CFD system, followed by the ADE, is solved with a finite volume approximation, which ensures the conservation of mass. Instead of defining a new imaging protocol to obtain relevant data, our cost function optimizes the bolus arrival time (BAT) of the contrast agent in 2D+t DSA sequences. The visual determination of BAT is common clinical practice and can be easily derived from and be compared to values, generated by a 1D-CFD simulation. Using this strategy, we ensure that our proposed method fits best to clinical practice and does not require any changes to the medical work flow. Synthetic experiments show that the recovered flow estimates match the ground truth values with less than 12% error in the mean flow rates.
Homogeneous spaces of Dirac groupoids
NASA Astrophysics Data System (ADS)
Jotz Lean, Madeleine
2016-06-01
A Poisson structure on a homogeneous space of a Poisson groupoid is homogeneous if the action of the Lie groupoid on the homogeneous space is compatible with the Poisson structures. According to a result of Liu, Weinstein and Xu, Poisson homogeneous spaces of a Poisson groupoid are in correspondence with suitable Dirac structures in the Courant algebroid defined by the Lie bialgebroid of the Poisson groupoid. We show that this correspondence result fits into a more natural context: the one of Dirac groupoids, which are objects generalizing Poisson groupoids and multiplicative closed 2-forms on groupoids.
Weinshank, R L; Zgombick, J M; Macchi, M J; Branchek, T A; Hartig, P R
1992-01-01
The serotonin 1D (5-HT1D) receptor is a pharmacologically defined binding site and functional receptor site. Observed variations in the properties of 5-HT1D receptors in different tissues have led to the speculation that multiple receptor proteins with slightly different properties may exist. We report here the cloning, deduced amino acid sequences, pharmacological properties, and second-messenger coupling of a pair of human 5-HT1D receptor genes, which we have designated 5-HT1D alpha and 5-HT1D beta due to their strong similarities in sequence, pharmacological properties, and second-messenger coupling. Both genes are free of introns in their coding regions, are expressed in the human cerebral cortex, and can couple to inhibition of adenylate cyclase activity. The pharmacological binding properties of these two human receptors are very similar, and match closely the pharmacological properties of human, bovine, and guinea pig 5-HT1D sites. Both receptors exhibit high-affinity binding of sumatriptan, a new anti-migraine medication, and thus are candidates for the pharmacological site of action of this drug. Images PMID:1565658
On the current drive capability of low dimensional semiconductors: 1D versus 2D
Zhu, Y.; Appenzeller, J.
2015-10-29
Low-dimensional electronic systems are at the heart of many scaling approaches currently pursuit for electronic applications. Here, we present a comparative study between an array of one-dimensional (1D) channels and its two-dimensional (2D) counterpart in terms of current drive capability. Lastly, our findings from analytical expressions derived in this article reveal that under certain conditions an array of 1D channels can outperform a 2D field-effect transistor because of the added degree of freedom to adjust the threshold voltage in an array of 1D devices.
A 1-D morphodynamic model of postglacial valley incision
NASA Astrophysics Data System (ADS)
Tunnicliffe, Jon F.; Church, Michael
2015-11-01
Chilliwack River is typical of many Cordilleran valley river systems that have undergone dramatic Holocene degradation of valley fills that built up over the course of Pleistocene glaciation. Downstream controls on base level, mainly blockage of valleys by glaciers, led to aggradation of significant glaciofluvial and glaciolacustrine valley fills and fan deposits, subsequently incised by fluvial action. Models of such large-scale, long-term degradation present a number of important challenges since the evolution of model parameters, such as the rate of bedload transport and grain size characteristics, are governed by the nature of the deposit. Sediment sampling in the Chilliwack Valley reveals a complex sequence of very coarse to fine textural modes. We present a 1-D numerical morphodynamic model for the river-floodplain system tailored to conditions in the valley. The model is adapted to dynamically adjust channel width to optimize sediment transporting capacity and to integrate relict valley fill material as the channel incises through valley deposits. Sensitivity to model parameters is studied using four principal criteria: profile concavity, rate of downstream grain size fining, bed surface sand content, and the timescale to equilibrium. Model results indicate that rates of abrasion and coarsening of the grain size distributions exert the strongest controls on all of the interrelated model performance criteria. While there are a number of difficulties in satisfying all model criteria simultaneously, results indicate that 1-D models of valley bottom sedimentary systems can provide a suitable framework for integrating results from sediment budget studies and chronologies of sediment evacuation established from dating.
Additive discrete 1D linear canonical transform
NASA Astrophysics Data System (ADS)
Zhao, Liang; Healy, John J.; Guo, Chang-liang; Sheridan, John T.
2015-09-01
The continuous linear canonical transforms (LCT) can describe a wide variety of wave field propagations through paraxial (first order) optical systems. Digital algorithms to numerically calculate the LCT are therefore important in modelling scalar wave field propagations and are also of interest for many digital signal processing applications. The continuous LCT is additive, but discretization can remove this property. In this paper we discuss three special cases of the LCT for which constraints can be identified to ensure the DLCT is additive.
Diagnostics from a 1-D atmospheric column
Flatley, J.M.; Mace, G.
1996-04-01
Various diagnostics were computed from an array of radiosondes during an intensive field operation arranged by the Atmospheric Radiation Measurement Program. The network data was centered around the site at Lamont, Oklahoma. The apparent heat source and apparent moisture sink were computed and compared to the kinematic vertical velocity for both real data and the mesoscale analysis and prediction system. Three different case studies of various weathe regimes were examined.
Magnetic behavior of some 1D Cu chains
NASA Astrophysics Data System (ADS)
Willett, Roger D.; Gomez-García, Carlos J.; Ghosh, Ashutosh
2004-05-01
The magnetic properties of three 1D copper(II) salts are reported. The compound Cu(14ane)Cu(N 3) 4 contains alternating site chains with weak FM coupling with J/k=0.635 K . Magnetization studies are reported on Cu(TIM)CuCl 4, an alternating site, alternating FM/AFM exchange system with J FM/k=29.7 K and J AFM/k=-8.66 K. (HPy) 2Cu 3Cl 8.2H 2O contains FM chains composed of alternating Cu 2Cl 62- dimers and CuCl 2(H 2O) 2 monomers, with intradimer coupling J 1/k=17.35 K and dimer-monomer coupling J 2/k=1.93 K .
MX chains: 1-D analog of CuO planes
Gammel, J.T.; Batistic, I.; Bishop, A.R.; Loh, E.Y. Jr.; Marianer, S.
1989-01-01
We study a two-band Peierls-Hubbard model for halogen-bridged mixed-valence transition metal linear chain complexes (MX chains). We include electron-electron correlations (both Hubbard and PPP-like expressions) using several techniques including calculations in the zero-hopping limit, exact diagonalization of small systems, mean field approximation, and a Gutzwiller-like Ansatz for quantum phonons. The adiabatic optical absorption and phonon spectra for both photo-excited and doping induced defects (kinks, polarons, bipolarons, and excitons) are discussed. A long period phase which occurs even at commensurate filling for certain parameter values may be related to twinning. The effect of including the electron-phonon in addition to the electron-electron interaction on the polaron/bipolaron (pairing) competition is especially interesting when this class of compounds is viewed as a 1-D analog of high-temperature superconductors. 6 refs., 4 figs.
RELIABLE COMPUTATION OF HOMOGENEOUS AZEOTROPES. (R824731)
It is important to determine the existence and composition of homogeneous azeotropes in the analysis of phase behavior and in the synthesis and design of separation systems, from both theoretical and practical standpoints. A new method for reliably locating an...
Entanglement Entropy in 1-D integrable chains
NASA Astrophysics Data System (ADS)
Franchini, Fabio; Evangelisti, Stefano; Ercolessi, Elisa; Ravanini, Francesco; de Luca, Andrea
2012-02-01
We study analytically the Renyi entropy of a bipartite lattice in the limit of two semi-infinite chains joined at the origin, for a few integrable 1-dimensional models, by using the techniques of Corner Transfer Matrices of the corresponding 2-D classical systems, namely the 8-vertex model and the RSOS. In the scaling limit, close to a conformal point, we reproduce the leading behavior expected from CFT prediction. The sub-leading corrections, however, differ from na"ive expectations and we show that lattice effect can give rise to additional relevant terms in any numerical approach. Moreover, in the vicinity of a non-conformal (ferromagnetic) point, we observe a violation of universality and a behavior of the entropy characteristic of an essential singularity.
A 1-D evolutionary model for icy satellites, applied to Enceladus
NASA Astrophysics Data System (ADS)
Malamud, Uri; Prialnik, Dina
2016-04-01
We develop a long-term 1-D evolution model for icy satellites that couples multiple processes: water migration and differentiation, geochemical reactions and silicate phase transitions, compaction by self-gravity, and ablation. The model further considers the following energy sources and sinks: tidal heating, radiogenic heating, geochemical energy released by serpentinization or absorbed by mineral dehydration, gravitational energy and insolation, and heat transport by conduction, convection, and advection. We apply the model to Enceladus, by guessing the initial conditions that would render a structure compatible with present-day observations, assuming the initial structure to have been homogeneous. Assuming the satellite has been losing water continually along its evolution, we postulate that it was formed as a more massive, more icy and more porous satellite, and gradually transformed into its present day state due to sustained long-term tidal heating. We consider several initial compositions and evolution scenarios and follow the evolution for the age of the Solar System, testing the present day model results against the available observational constraints. Our model shows the present configuration to be differentiated into a pure icy mantle, several tens of km thick, overlying a rocky core, composed of dehydrated rock at the center and hydrated rock in the outer part. For Enceladus, it predicts a higher rock/ice mass ratio than previously assumed and a thinner ice mantle, compatible with recent estimates based on gravity field measurements. Although, obviously, the model cannot be used to explain local phenomena, it sheds light on the internal structure invoked in explanations of localized features and activities.
Computational Study and Analysis of Structural Imperfections in 1D and 2D Photonic Crystals
K.R. Maskaly
2005-06-01
Dielectric reflectors that are periodic in one or two dimensions, also known as 1D and 2D photonic crystals, have been widely studied for many potential applications due to the presence of wavelength-tunable photonic bandgaps. However, the unique optical behavior of photonic crystals is based on theoretical models of perfect analogues. Little is known about the practical effects of dielectric imperfections on their technologically useful optical properties. In order to address this issue, a finite-difference time-domain (FDTD) code is employed to study the effect of three specific dielectric imperfections in 1D and 2D photonic crystals. The first imperfection investigated is dielectric interfacial roughness in quarter-wave tuned 1D photonic crystals at normal incidence. This study reveals that the reflectivity of some roughened photonic crystal configurations can change up to 50% at the center of the bandgap for RMS roughness values around 20% of the characteristic periodicity of the crystal. However, this reflectivity change can be mitigated by increasing the index contrast and/or the number of bilayers in the crystal. In order to explain these results, the homogenization approximation, which is usually applied to single rough surfaces, is applied to the quarter-wave stacks. The results of the homogenization approximation match the FDTD results extremely well, suggesting that the main role of the roughness features is to grade the refractive index profile of the interfaces in the photonic crystal rather than diffusely scatter the incoming light. This result also implies that the amount of incoherent reflection from the roughened quarterwave stacks is extremely small. This is confirmed through direct extraction of the amount of incoherent power from the FDTD calculations. Further FDTD studies are done on the entire normal incidence bandgap of roughened 1D photonic crystals. These results reveal a narrowing and red-shifting of the normal incidence bandgap with
Baño Otalora, Beatriz; Popovic, Natalija; Gambini, Juan; Popovic, Miroljub; Viña, José; Bonet-Costa, Vicent; Reiter, Russel J; Camello, Pedro Javier; Rol, Maria Ángeles; Madrid, Juan Antonio
2012-08-01
Alzheimer disease (AD) is a neurodegenerative disorder that primarily causes β-amyloid accumulation in the brain, resulting in cognitive and behavioral deficits. AD patients, however, also suffer from severe circadian rhythm disruptions, and the underlying causes are still not fully known. Patients with AD show reduced systemic melatonin levels. This may contribute to their symptoms, since melatonin is an effective chronobiotic and antioxidant with neuroprotective properties. Here, the authors critically assessed the effects of long-term melatonin treatment on circadian system function, hippocampal oxidative stress, and spatial memory performance in the APPswe/PS1 double transgenic (Tg) mouse model of AD. To test if melatonin MT1/MT2 receptor activation, alone, was involved, the authors chronically treated some mice with the selective MT1/MT2 receptor agonist ramelteon. The results indicate that many of the circadian and behavioral parameters measured, including oxidative stress markers, were not significantly affected in these AD mice. During the day, though, Tg controls (Tg-CON) showed significantly higher mean activity and body temperature (BT) than wild-type (WT) mice. Overall, BT rhythm amplitude was significantly lower in Tg than in WT mice. Although melatonin treatment had no effect, ramelteon significantly reduced the amplitude of the BT rhythm in Tg mice. Towards the end of the experiment, Tg mice treated with ramelteon (Tg-RAM) showed significantly higher circadian rhythm fragmentation than Tg-CON and reduced circadian BT rhythm strength. The free-running period (τ) for the BT and locomotor activity (LA) rhythms of Tg-CON was <24 h. Whereas melatonin maintained τ at 24 h for BT and LA in both genotypes, ramelteon treatment had no effect. In the behavioral tests, the number of approaches and time spent exploring novel objects were significantly higher in Tg-CON than WT controls. Brain tissue analysis revealed significant reduction in hippocampal protein
NASA Technical Reports Server (NTRS)
Leibfried, T. F., Jr.; Davari, Sadegh; Natarajan, Swami; Zhao, Wei
1992-01-01
Two categories were chosen for study: the issue of using a preprocessor on Ada code of Application Programs which would interface with the Run-Time Object Data Base Standard Services (RODB STSV), the intent was to catch and correct any mis-registration errors of the program coder between the user declared Objects, their types, their addresses, and the corresponding RODB definitions; and RODB STSV Performance Issues and Identification of Problems with the planned methods for accessing Primitive Object Attributes, this included the study of an alternate storage scheme to the 'store objects by attribute' scheme in the current design of the RODB. The study resulted in essentially three separate documents, an interpretation of the system requirements, an assessment of the preliminary design, and a detailing of the components of a detailed design.
Brady 1D seismic velocity model ambient noise prelim
Mellors, Robert J.
2013-10-25
Preliminary 1D seismic velocity model derived from ambient noise correlation. 28 Green's functions filtered between 4-10 Hz for Vp, Vs, and Qs were calculated. 1D model estimated for each path. The final model is a median of the individual models. Resolution is best for the top 1 km. Poorly constrained with increasing depth.
1-D Numerical Analysis of RBCC Engine Performance
NASA Technical Reports Server (NTRS)
Han, Samuel S.
1998-01-01
An RBCC engine combines air breathing and rocket engines into a single engine to increase the specific impulse over an entire flight trajectory. Considerable research pertaining to RBCC propulsion was performed during the 1960's and these engines were revisited recently as a candidate propulsion system for either a single-stage-to-orbit (SSTO) or two-stage-to-orbit (TSTO) launch vehicle. There are a variety of RBCC configurations that had been evaluated and new designs are currently under development. However, the basic configuration of all RBCC systems is built around the ejector scramjet engine originally developed for the hypersonic airplane. In this configuration, a rocket engine plays as an ejector in the air-augmented initial acceleration mode, as a fuel injector in scramjet mode and the rocket in all rocket mode for orbital insertion. Computational fluid dynamics (CFD) is a useful tool for the analysis of complex transport processes in various components in RBCC propulsion systems. The objective of the present research was to develop a transient 1-D numerical model that could be used to predict flow behavior throughout a generic RBCC engine following a flight path.
AQUEOUS HOMOGENEOUS REACTORTECHNICAL PANEL REPORT
Diamond, D.J.; Bajorek, S.; Bakel, A.; Flanagan, G.; Mubayi, V.; Skarda, R.; Staudenmeier, J.; Taiwo, T.; Tonoike, K.; Tripp, C.; Wei, T.; Yarsky, P.
2010-12-03
Considerable interest has been expressed for developing a stable U.S. production capacity for medical isotopes and particularly for molybdenum- 99 (99Mo). This is motivated by recent re-ductions in production and supply worldwide. Consistent with U.S. nonproliferation objectives, any new production capability should not use highly enriched uranium fuel or targets. Conse-quently, Aqueous Homogeneous Reactors (AHRs) are under consideration for potential 99Mo production using low-enriched uranium. Although the Nuclear Regulatory Commission (NRC) has guidance to facilitate the licensing process for non-power reactors, that guidance is focused on reactors with fixed, solid fuel and hence, not applicable to an AHR. A panel was convened to study the technical issues associated with normal operation and potential transients and accidents of an AHR that might be designed for isotope production. The panel has produced the requisite AHR licensing guidance for three chapters that exist now for non-power reactor licensing: Reac-tor Description, Reactor Coolant Systems, and Accident Analysis. The guidance is in two parts for each chapter: 1) standard format and content a licensee would use and 2) the standard review plan the NRC staff would use. This guidance takes into account the unique features of an AHR such as the fuel being in solution; the fission product barriers being the vessel and attached systems; the production and release of radiolytic and fission product gases and their impact on operations and their control by a gas management system; and the movement of fuel into and out of the reactor vessel.
Popovic, Marta; Zaja, Roko; Fent, Karl; Smital, Tvrtko
2014-10-01
Polyspecific transporters from the organic anion transporting polypeptide (OATP/Oatp) superfamily mediate the uptake of a wide range of compounds. In zebrafish, Oatp1d1 transports conjugated steroid hormones and cortisol. It is predominantly expressed in the liver, brain and testes. In this study we have characterized the transport of xenobiotics by the zebrafish Oatp1d1 transporter. We developed a novel assay for assessing Oatp1d1 interactors using the fluorescent probe Lucifer yellow and transient transfection in HEK293 cells. Our data showed that numerous environmental contaminants interact with zebrafish Oatp1d1. Oatp1d1 mediated the transport of diclofenac with very high affinity, followed by high affinity towards perfluorooctanesulfonic acid (PFOS), nonylphenol, gemfibrozil and 17α-ethinylestradiol; moderate affinity towards carbaryl, diazinon and caffeine; and low affinity towards metolachlor. Importantly, many environmental chemicals acted as strong inhibitors of Oatp1d1. A strong inhibition of Oatp1d1 transport activity was found by perfluorooctanoic acid (PFOA), chlorpyrifos-methyl, estrone (E1) and 17β-estradiol (E2), followed by moderate to low inhibition by diethyl phthalate, bisphenol A, 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4 tetrahydronapthalene and clofibrate. In this study we identified Oatp1d1 as a first Solute Carrier (SLC) transporter involved in the transport of a wide range of xenobiotics in fish. Considering that Oatps in zebrafish have not been characterized before, our work on zebrafish Oatp1d1 offers important new insights on the understanding of uptake processes of environmental contaminants, and contributes to the better characterization of zebrafish as a model species. - Highlights: • We optimized a novel assay for determination of Oatp1d1 interactors • Oatp1d1 is the first SLC characterized fish xenobiotic transporter • PFOS, nonylphenol, diclofenac, EE2, caffeine are high affinity Oatp1d1substrates • PFOA, chlorpyrifos
The SLE-associated Pbx1-d isoform acts as a dominant-negative transcriptional regulator
Sengupta, M; Liang, S; Potula, H-HS; Chang, L-J; Morel, L
2013-01-01
Pbx1 is a transcription factor involved in multiple cellular processes, including the maintenance of self-renewal of hematopoietic progenitors. We have shown that the CD4 + T-cell expression of a novel splice isoform of Pbx1, Pbx1-d, is associated with lupus susceptibility in the NZM2410 mouse and in lupus patients. The function of Pbx1 in T cells is unknown, but the splicing out of the DNA-binding domain in Pbx1-d predicts a dominant-negative function. In support of this hypothesis, we have shown that Pbx1-d transduction accelerates differentiation of MC3T3-E1 osteoblast pregenitors and mimics the effect of short hairpin RNA silencing of Pbx1. Conversely, Pbx1-d transduction reduced the expression of Sox3, a gene strongly transactivated by Pbx1, and Pbx1-d did not bind the Sox3 promoter. These results constitute a first step towards the understanding on how Pbx1-d contributes to systemic autoimmunity in the NZM2410 mouse model as well as in lupus patients. PMID:22992721
Phosphorylation and desensitization of alpha1d-adrenergic receptors.
García-Sáinz, J A; Vázquez-Cuevas, F G; Romero-Avila, M T
2001-01-01
In rat-1 fibroblasts stably expressing rat alpha(1d)-adrenoceptors, noradrenaline and PMA markedly decreased alpha(1d)-adrenoceptor function (noradrenaline-elicited increases in calcium in whole cells and [(35)S]guanosine 5'-[gamma-thio]triphosphate binding in membranes), suggesting homologous and heterologous desensitizations. Photoaffinity labelling, Western blotting and immunoprecipitation identified alpha(1d)-adrenoceptors as a broad band of 70-80 kDa. alpha(1d)-Adrenoceptors were phosphorylated in the basal state and noradrenaline and PMA increased it. The effect of noradrenaline was concentration-dependent (EC(50) 75 nM), rapid (maximum at 1 min) and transient. Phorbol ester-induced phosphorylation was concentration-dependent (EC(50) 25 nM), slightly slower (maximum at 5 min) and stable for at least 60 min. Inhibitors of protein kinase C decreased the effect of phorbol esters but not that of noradrenaline. Evidence of cross-talk of alpha(1d)-adrenoceptors with receptors endogenously expressed in rat-1 fibroblasts was given by the ability of endothelin, lysophosphatidic acid and bradykinin to induce alpha(1d)-adrenoceptor phosphorylation. In summary, it is shown for the first time here that alpha(1d)-adrenoceptors are phosphoproteins and that receptor phosphorylation is increased by the natural ligand, noradrenaline, by direct activation of protein kinase C and via cross-talk with other receptors endogenously expressed in rat-1 fibroblasts. Receptor phosphorylation has functional repercussions. PMID:11171057
Low Temperature Rate Constants for the Reactions of O((1)D) with N2, O2, and Ar.
Grondin, Romain; Loison, Jean-Christophe; Hickson, Kevin M
2016-07-14
The kinetics of the gas-phase quenching reactions O((1)D) + N2, O((1)D) + O2, and O((1)D) + Ar have been studied over the 50-296 K temperature range using the Laval nozzle method. O((1)D) atoms were created in situ by the pulsed photolysis of O3 precursor molecules at 266 nm. Rate constants for these processes were measured directly, following the decay of O((1)D) atoms through vacuum ultraviolet laser-induced fluorescence at 115.215 nm. For the O((1)D) + N2 and O((1)D) + O2 reactions, the quenching efficiencies are seen to increase as the temperature falls. For the O((1)D) + N2 system, this indicates the likely influence of the intermediate complex lifetime on the quenching rate through nonadiabatic processes. For the O((1)D) + O2 system, which is considerably more complex, this behavior could result from the interactions between several potential energy surfaces. PMID:26814664
Turbulence in homogeneous shear flows
NASA Astrophysics Data System (ADS)
Pumir, Alain
1996-11-01
Homogeneous shear flows with an imposed mean velocity U=Syx̂ are studied in a period box of size Lx×Ly×Lz, in the statistically stationary turbulent state. In contrast with unbounded shear flows, the finite size of the system constrains the large-scale dynamics. The Reynolds number, defined by Re≡SL2y/ν varies in the range 2600⩽Re⩽11300. The total kinetic energy and enstrophy in the volume of numerical integration have large peaks, resulting in fluctuations of kinetic energy of order 30%-50%. The mechanism leading to these fluctuations is very reminiscent of the ``streaks'' responsible for the violent bursts observed in turbulent boundary layers. The large scale anisotropy of the flow, characterized by the two-point correlation tensor
Polar molecule reactive collisions in quasi-1D systems
NASA Astrophysics Data System (ADS)
Simoni, A.; Srinivasan, S.; Launay, J.-M.; Jachymski, K.; Idziaszek, Z.; Julienne, P. S.
2015-01-01
We study polar molecule scattering in quasi-one-dimensional geometries. Elastic and reactive collision rates are computed as a function of collision energy and electric dipole moment for different confinement strengths. The numerical results are interpreted in terms of first order scattering and of adiabatic models. Universal dipolar scattering is also discussed. Our results are relevant to experiments where control of the collision dynamics through one-dimensional confinement and an applied electric field is envisioned.
Severe Hypertriglyceridemia in Glut1D on Ketogenic Diet.
Klepper, Joerg; Leiendecker, Baerbel; Heussinger, Nicole; Lausch, Ekkehart; Bosch, Friedrich
2016-04-01
High-fat ketogenic diets are the only treatment available for Glut1 deficiency (Glut1D). Here, we describe an 8-year-old girl with classical Glut1D responsive to a 3:1 ketogenic diet and ethosuximide. After 3 years on the diet a gradual increase of blood lipids was followed by rapid, severe asymptomatic hypertriglyceridemia (1,910 mg/dL). Serum lipid apheresis was required to determine liver, renal, and pancreatic function. A combination of medium chain triglyceride-oil and a reduction of the ketogenic diet to 1:1 ratio normalized triglyceride levels within days but triggered severe myoclonic seizures requiring comedication with sultiam. Severe hypertriglyceridemia in children with Glut1D on ketogenic diets may be underdiagnosed and harmful. In contrast to congenital hypertriglyceridemias, children with Glut1D may be treated effectively by dietary adjustments alone. PMID:26902182
1D Nanostructures: Controlled Fabrication and Energy Applications
Hu, Michael Z.
2013-01-01
Jian Wei, Xuchun Song, Chunli Yang, and Michael Z. Hu, 1D Nanostructures: Controlled Fabrication and Energy Applications, Journal of Nanomaterials, published special issue (http://www.hindawi.com/journals/jnm/si/197254/) (2013).
60. BOILER CHAMBER No. 1, D LOOP STEAM GENERATOR AND ...
60. BOILER CHAMBER No. 1, D LOOP STEAM GENERATOR AND MAIN COOLANT PUMP LOOKING NORTHEAST (LOCATION OOO) - Shippingport Atomic Power Station, On Ohio River, 25 miles Northwest of Pittsburgh, Shippingport, Beaver County, PA
Popovic, Marta; Zaja, Roko; Fent, Karl; Smital, Tvrtko
2014-10-01
Polyspecific transporters from the organic anion transporting polypeptide (OATP/Oatp) superfamily mediate the uptake of a wide range of compounds. In zebrafish, Oatp1d1 transports conjugated steroid hormones and cortisol. It is predominantly expressed in the liver, brain and testes. In this study we have characterized the transport of xenobiotics by the zebrafish Oatp1d1 transporter. We developed a novel assay for assessing Oatp1d1 interactors using the fluorescent probe Lucifer yellow and transient transfection in HEK293 cells. Our data showed that numerous environmental contaminants interact with zebrafish Oatp1d1. Oatp1d1 mediated the transport of diclofenac with very high affinity, followed by high affinity towards perfluorooctanesulfonic acid (PFOS), nonylphenol, gemfibrozil and 17α-ethinylestradiol; moderate affinity towards carbaryl, diazinon and caffeine; and low affinity towards metolachlor. Importantly, many environmental chemicals acted as strong inhibitors of Oatp1d1. A strong inhibition of Oatp1d1 transport activity was found by perfluorooctanoic acid (PFOA), chlorpyrifos-methyl, estrone (E1) and 17β-estradiol (E2), followed by moderate to low inhibition by diethyl phthalate, bisphenol A, 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4 tetrahydronapthalene and clofibrate. In this study we identified Oatp1d1 as a first Solute Carrier (SLC) transporter involved in the transport of a wide range of xenobiotics in fish. Considering that Oatps in zebrafish have not been characterized before, our work on zebrafish Oatp1d1 offers important new insights on the understanding of uptake processes of environmental contaminants, and contributes to the better characterization of zebrafish as a model species. PMID:25088042
On the origin of multi-step spin transition behaviour in 1D nanoparticles
NASA Astrophysics Data System (ADS)
Chiruta, Daniel; Jureschi, Catalin-Maricel; Linares, Jorge; Dahoo, Pierre Richard; Garcia, Yann; Rotaru, Aurelian
2015-09-01
To investigate the spin state switching mechanism in spin crossover (SCO) nanoparticles, a special attention is given to three-step thermally induced SCO behavior in 1D chains. An additional term is included in the standard Ising-like Hamiltonian to account for the border interaction between SCO molecules and its local environment. It is shown that this additional interaction, together with the short range interaction, drives the multi-steps thermal hysteretic behavior in 1D SCO systems. The relation between a polymeric matrix and this particular multi-step SCO phenomenon is discussed accordingly. Finally, the environmental influence on the SCO system's size is analyzed as well.
Lattice study of (D¯ 1D*)± near-threshold scattering
NASA Astrophysics Data System (ADS)
Chen, Ting; Chen, Ying; Gong, Ming; Lei, Yu-Hong; Li, Ning; Liu, Chuan; Liu, Yu-Bin; Liu, Zhao-Feng; Ma, Jian-Ping; Wang, Zhan-Lin; Zhang, Jian-Bo; Clqcd Collaboration
2016-06-01
In this exploratory lattice study, low-energy near threshold scattering of the (D¯1D*)± meson system is analyzed using lattice QCD with Nf=2 twisted mass fermion configurations. Both s-wave (JP=0-) and p-wave (JP=1+) channels are investigated. It is found that the interaction between the two charmed mesons is attractive near the threshold in both channels. This calculation provides some hints in the searching of resonances or bound states around the threshold of (D¯1D*)± system.
TBC1D24 genotype–phenotype correlation
Balestrini, Simona; Milh, Mathieu; Castiglioni, Claudia; Lüthy, Kevin; Finelli, Mattea J.; Verstreken, Patrik; Cardon, Aaron; Stražišar, Barbara Gnidovec; Holder, J. Lloyd; Lesca, Gaetan; Mancardi, Maria M.; Poulat, Anne L.; Repetto, Gabriela M.; Banka, Siddharth; Bilo, Leonilda; Birkeland, Laura E.; Bosch, Friedrich; Brockmann, Knut; Cross, J. Helen; Doummar, Diane; Félix, Temis M.; Giuliano, Fabienne; Hori, Mutsuki; Hüning, Irina; Kayserili, Hulia; Kini, Usha; Lees, Melissa M.; Meenakshi, Girish; Mewasingh, Leena; Pagnamenta, Alistair T.; Peluso, Silvio; Mey, Antje; Rice, Gregory M.; Rosenfeld, Jill A.; Taylor, Jenny C.; Troester, Matthew M.; Stanley, Christine M.; Ville, Dorothee; Walkiewicz, Magdalena; Falace, Antonio; Fassio, Anna; Lemke, Johannes R.; Biskup, Saskia; Tardif, Jessica; Ajeawung, Norbert F.; Tolun, Aslihan; Corbett, Mark; Gecz, Jozef; Afawi, Zaid; Howell, Katherine B.; Oliver, Karen L.; Berkovic, Samuel F.; Scheffer, Ingrid E.; de Falco, Fabrizio A.; Oliver, Peter L.; Striano, Pasquale; Zara, Federico
2016-01-01
Objective: To evaluate the phenotypic spectrum associated with mutations in TBC1D24. Methods: We acquired new clinical, EEG, and neuroimaging data of 11 previously unreported and 37 published patients. TBC1D24 mutations, identified through various sequencing methods, can be found online (http://lovd.nl/TBC1D24). Results: Forty-eight patients were included (28 men, 20 women, average age 21 years) from 30 independent families. Eighteen patients (38%) had myoclonic epilepsies. The other patients carried diagnoses of focal (25%), multifocal (2%), generalized (4%), and unclassified epilepsy (6%), and early-onset epileptic encephalopathy (25%). Most patients had drug-resistant epilepsy. We detail EEG, neuroimaging, developmental, and cognitive features, treatment responsiveness, and physical examination. In silico evaluation revealed 7 different highly conserved motifs, with the most common pathogenic mutation located in the first. Neuronal outgrowth assays showed that some TBC1D24 mutations, associated with the most severe TBC1D24-associated disorders, are not necessarily the most disruptive to this gene function. Conclusions: TBC1D24-related epilepsy syndromes show marked phenotypic pleiotropy, with multisystem involvement and severity spectrum ranging from isolated deafness (not studied here), benign myoclonic epilepsy restricted to childhood with complete seizure control and normal intellect, to early-onset epileptic encephalopathy with severe developmental delay and early death. There is no distinct correlation with mutation type or location yet, but patterns are emerging. Given the phenotypic breadth observed, TBC1D24 mutation screening is indicated in a wide variety of epilepsies. A TBC1D24 consortium was formed to develop further research on this gene and its associated phenotypes. PMID:27281533
3D/1D Analysis of ICRF Antennas
NASA Astrophysics Data System (ADS)
Maggiora, Riccardo; Lancellotti, Vito; Vecchi, Giuseppe
2003-10-01
An innovative tool has been realized for the 3D/1D simulation of Ion Cyclotron Radio Frequency (ICRF), i.e. accounting for antennas in a realistic 3D geometry and with an accurate 1D plasma model. The approach to the problem is based on an integral-equation formulation for the self-consistent evaluation of the current distribution on the conductors. The environment has been subdivided in two coupled region: the plasma region and the vacuum region. The two problems are linked by means of a magnetic current (electric field) distribution on the aperture between the two regions. In the vacuum region all the calculations are executed in the spatial domain while in the plasma region an extraction in the spectral domain of some integrals is employed that permits to significantly reduce the integration support and to obtain a high numerical efficiency leading to the practical possibility of using a large number of sub-domain (rectangular or triangular) basis functions on each solid conductor of the system. The plasma enters the formalism of the plasma region via a surface impedance matrix; for this reason any plasma model can be used; at present the FELICE code has been adopted, that affords density and temperature profiles, and FLR effects. The source term directly models the TEM mode of the coax feeding the antenna and the current in the coax is determined self-consistently, giving the input impedance/admittance of the antenna itself. Calculation of field distributions (both magnetic and electric), useful for sheath considerations, is included. This tool has been implemented in a suite, called TOPICA, that is modular and applicable to ICRF antenna structures of arbitrary shape. This new simulation tool can assist during the detailed design phase and for this reason can be considered a "Virtual Prototyping Laboratory" (VPL). The TOPICA suite has been tested against assessed codes and against measurements and data of mock-ups and existing antennas. The VPL is being used in
Spectral functions of 1D Peierls and Mott insulators
NASA Astrophysics Data System (ADS)
Voit, Johannes
1998-03-01
We construct the spectral function of the Luther-Emery model which describes one-dimensional Peierls and Mott insulators with a spin resp. charge gap, using symmetries and known limits and equivalences to other models. For the Peierls insulator, we find a true singularity with interaction dependent exponents on the gapped spin dispersion and a finite maximum depending on the magnitude of the spin gap, on a charge dispersion shifted by Δ_σ, as well as strong shadow bands with the same functional form as the main bands. For 1D Mott insulators, one or two singularities with universal inverse-square-root singularities are found depending on whether the charge velocity is larger or smaller than the spin velocity. The shadow band has a single singularity on the renormalized charge dispersion. These results could apply to the description of photoemission experiments in systems like K_0.3 Mo O_3, TTF-TCNQ, or Sr Cu O_2.
The Architecture of a Homogeneous Vector Supercomputer
NASA Astrophysics Data System (ADS)
Gustafson, J. L.; Hawkinson, S.; Scott, K.
A new homogeneous computer architecture combines two fundamental techniques for high-speed computing: parallelism based on the binary n-cube interconnect, and pipelined vector arithmetic. The design makes extensive use of VLSI technology, resulting in a processing node that can be economically replicated. The new system achieves a careful balance between high-speed communication and floating-point computation. This paper describes the new architecture in detail and explores some of the issues in developing effective software.
Dynamical functions of a 1D correlated quantum liquid
NASA Astrophysics Data System (ADS)
Carmelo, J. M. P.; Bozi, D.; Penc, K.
2008-10-01
The dynamical correlation functions in one-dimensional electronic systems show power-law behaviour at low energies and momenta close to integer multiples of the charge and spin Fermi momenta. These systems are usually referred to as Tomonaga-Luttinger liquids. However, near well defined lines of the (k,ω) plane the power-law behaviour extends beyond the low-energy cases mentioned above, and also appears at higher energies, leading to singular features in the photoemission spectra and other dynamical correlation functions. The general spectral-function expressions derived in this paper were used in recent theoretical studies of the finite-energy singular features in photoemission of the organic compound tetrathiafulvalene-tetracyanoquinodimethane (TTF-TCNQ) metallic phase. They are based on a so-called pseudofermion dynamical theory (PDT), which allows us to systematically enumerate and describe the excitations in the Hubbard model starting from the Bethe ansatz, as well as to calculate the charge and spin object phase shifts appearing as exponents of the power laws. In particular, we concentrate on the spin-density m\\rightarrow 0 limit and on effects in the vicinity of the singular border lines, as well as close to half filling. Our studies take into account spectral contributions from types of microscopic processes that do not occur for finite values of the spin density. In addition, the specific processes involved in the spectral features of TTF-TCNQ are studied. Our results are useful for the further understanding of the unusual spectral properties observed in low-dimensional organic metals and also provide expressions for the one- and two-atom spectral functions of a correlated quantum system of ultracold fermionic atoms in a 1D optical lattice with on-site two-atom repulsion.
Homogeneity of Antibody Responses in Tuberculosis Patients
Samanich, K.; Belisle, J. T.; Laal, S.
2001-01-01
The goals of the present study were twofold: (i) to compare the repertoires of antigens in culture filtrates of in vitro-grown Mycobacterium tuberculosis that are recognized by antibodies from noncavitary and cavitary tuberculosis (TB) patients and (ii) to determine the extent of variation that exists between the antigen profiles recognized by individual TB patients. Lipoarabinomannan-free culture filtrate proteins of M. tuberculosis were fractionated by one-dimensional (1-D) and 2-D polyacrylamide gel electrophoresis, and the Western blots were probed with sera from non-human immunodeficiency virus (non-HIV)-infected cavitary and noncavitary TB patients and from HIV-infected, noncavitary TB patients. In contrast to earlier studies based on recombinant antigens of M. tuberculosis which suggested that antibody responses in TB patients were heterogeneous (K. Lyashchenko et al., 1998, Infect. Immun. 66:3936–3940, 1998), our studies with native culture filtrate proteins show that the antibody responses in TB patients show significant homogeneity in being directed against a well-defined subset of antigens. Thus, there is a well-defined subset of culture filtrate antigens that elicits antibodies during noncavitary and cavitary disease. In addition, another set of antigens is recognized primarily by cavitary TB patients. The mapping with individual patient sera presented here suggests that serodiagnostic tests based on the subset of antigens recognized during both noncavitary and cavitary TB will enhance the sensitivity of antibody detection in TB patients, especially in difficult-to-diagnose, smear-negative, noncavitary TB patients. PMID:11402004
Homogenizing Developmental Studies and ESL.
ERIC Educational Resources Information Center
Weaver, Margaret E.
A discussion of pragmatic issues in both developmental studies (DS) and English-as-a-second-language (ESL) instruction at the college level argues that because the two fields have common problems, challenges, and objectives, they have become homogenized as one in many institutions. Because full-time college faculty avoid teaching developmental…
Homogeneous cooling state of frictionless rod particles
NASA Astrophysics Data System (ADS)
Rubio-Largo, S. M.; Alonso-Marroquin, F.; Weinhart, T.; Luding, S.; Hidalgo, R. C.
2016-02-01
In this work, we report some theoretical results on granular gases consisting of frictionless 3D rods with low energy dissipation. We performed simulations on the temporal evolution of soft spherocylinders, using a molecular dynamics algorithm implemented on GPU architecture. A homogeneous cooling state for rods, where the time dependence of the system's intensive variables occurs only through a global granular temperature, has been identified. We have found a homogeneous cooling process, which is in excellent agreement with Haff's law, when using an adequate rescaling time τ(ξ), the value of which depends on the particle elongation ξ and the restitution coefficient. It was further found that scaled particle velocity distributions remain approximately Gaussian regardless of the particle shape. Similarly to a system of ellipsoids, energy equipartition between rotational and translational degrees of freedom was better satisfied as one gets closer to the elastic limit. Taking advantage of scaling properties, we have numerically determined the general functionality of the magnitude Dc(ξ), which describes the efficiency of the energy interchange between rotational and translational degrees of freedom, as well as its dependence on particle shape. We have detected a range of particle elongations (1.5 < ξ < 4.0), where the average energy transfer between the rotational and translational degrees of freedom results greater for spherocylinders than for homogeneous ellipsoids with the same aspect ratio.
Spin Excitations and Phonon Anomaly in Quasi-1D Spiral Magneti CuBr2
NASA Astrophysics Data System (ADS)
Li, Yuan; Wang, Chong; Yu, Daiwei; Wang, Lichen; Wang, Fa; Iida, Kazuki; Kamazawa, Kazuya; Wakimoto, Shuichi
CuBr2 can be considered as a model quasi-one-dimensional (quasi-1D) spin-1/2 magnet, in which the frustrating ferromagnetic nearest-neighbor and antiferromagnetic next-nearest-neighbor exchange interactions give rise to a cycloidal magnetic order below TN = 73 K. The removal of inversion symmetry by the magnetic order also makes the material a type-II multiferroic system with a remarkably simple crystal structure. Using time-of-flight inelastic neutron scattering spectroscopy, we have determined the spin-wave as well as phonon spectra throughout the entire Brillouin zone. The spin-wave spectrum exhibits pronounced anisotropy and magnon damping, consistent with the material's quasi-1D nature and the non-colinear spin structure. The phonon spectrum exhibits dramatic discontinuities in the dispersion across the quasi-1D magnetic wave vector, indicative of strong magnetoelastic coupling and possibly of a spin-orbital texture that comes along with the spin correlations.
A comparison of 1D and 2D LSTM architectures for the recognition of handwritten Arabic
NASA Astrophysics Data System (ADS)
Yousefi, Mohammad Reza; Soheili, Mohammad Reza; Breuel, Thomas M.; Stricker, Didier
2015-01-01
In this paper, we present an Arabic handwriting recognition method based on recurrent neural network. We use the Long Short Term Memory (LSTM) architecture, that have proven successful in different printed and handwritten OCR tasks. Applications of LSTM for handwriting recognition employ the two-dimensional architecture to deal with the variations in both vertical and horizontal axis. However, we show that using a simple pre-processing step that normalizes the position and baseline of letters, we can make use of 1D LSTM, which is faster in learning and convergence, and yet achieve superior performance. In a series of experiments on IFN/ENIT database for Arabic handwriting recognition, we demonstrate that our proposed pipeline can outperform 2D LSTM networks. Furthermore, we provide comparisons with 1D LSTM networks trained with manually crafted features to show that the automatically learned features in a globally trained 1D LSTM network with our normalization step can even outperform such systems.
Localized self-heating in large arrays of 1D nanostructures.
Monereo, O; Illera, S; Varea, A; Schmidt, M; Sauerwald, T; Schütze, A; Cirera, A; Prades, J D
2016-03-01
One dimensional (1D) nanostructures offer a promising path towards highly efficient heating and temperature control in integrated microsystems. The so called self-heating effect can be used to modulate the response of solid state gas sensor devices. In this work, efficient self-heating was found to occur at random networks of nanostructured systems with similar power requirements to highly ordered systems (e.g. individual nanowires, where their thermal efficiency was attributed to the small dimensions of the objects). Infrared thermography and Raman spectroscopy were used to map the temperature profiles of films based on random arrangements of carbon nanofibers during self-heating. Both the techniques demonstrate consistently that heating concentrates in small regions, the here-called "hot-spots". On correlating dynamic temperature mapping with electrical measurements, we also observed that these minute hot-spots rule the resistance values observed macroscopically. A physical model of a random network of 1D resistors helped us to explain this observation. The model shows that, for a given random arrangement of 1D nanowires, current spreading through the network ends up defining a set of spots that dominate both the electrical resistance and power dissipation. Such highly localized heating explains the high power savings observed in larger nanostructured systems. This understanding opens a path to design highly efficient self-heating systems, based on random or pseudo-random distributions of 1D nanostructures. PMID:26868599
Probing 1D super-strongly correlated dipolar quantum gases
NASA Astrophysics Data System (ADS)
Citro, R.; de Palo, S.; Orignac, E.; Pedri, P.; Chiofalo, M.-L.
2009-04-01
One-dimensional (1D) dipolar quantum gases are characterized by a very special condition where super-strong correlations occur to significantly affect the static and dynamical low-energy behavior. This behavior is accurately described by the Luttinger Liquid theory with parameter K < 1. Dipolar Bose gases are routinely studied in laboratory with Chromium atoms. On the other hand, 1D realizations with molecular quantum gases can be at reach of current experimental expertises, allowing to explore such extreme quantum degenerate conditions which are the bottom line for designing technological devices. Aim of the present contribution is to focus on the possible probes expected to signal the reach of Luttinger-Liquid behavior in 1D dipolar gases.
PC-1D installation manual and user's guide
Basore, P.A.
1991-05-01
PC-1D is a software package for personal computers that uses finite-element analysis to solve the fully-coupled two-carrier semiconductor transport equations in one dimension. This program is particularly useful for analyzing the performance of optoelectronic devices such as solar cells, but can be applied to any bipolar device whose carrier flows are primarily one-dimensional. This User's Guide provides the information necessary to install PC-1D, define a problem for solution, solve the problem, and examine the results. Example problems are presented which illustrate these steps. The physical models and numerical methods utilized are presented in detail. This document supports version 3.1 of PC-1D, which incorporates faster numerical algorithms with better convergence properties than previous versions of the program. 51 refs., 17 figs., 5 tabs.
The GIRAFFE Archive: 1D and 3D Spectra
NASA Astrophysics Data System (ADS)
Royer, F.; Jégouzo, I.; Tajahmady, F.; Normand, J.; Chilingarian, I.
2013-10-01
The GIRAFFE Archive (http://giraffe-archive.obspm.fr) contains the reduced spectra observed with the intermediate and high resolution multi-fiber spectrograph installed at VLT/UT2 (ESO). In its multi-object configuration and the different integral field unit configurations, GIRAFFE produces 1D spectra and 3D spectra. We present here the status of the archive and the different functionalities to select and download both 1D and 3D data products, as well as the present content. The two collections are available in the VO: the 1D spectra (summed in the case of integral field observations) and the 3D field observations. These latter products can be explored using the VO Paris Euro3D Client (http://voplus.obspm.fr/ chil/Euro3D).
Nanodamage and Nanofailure of 1d Zno Nanomaterials and Nanodevices
NASA Astrophysics Data System (ADS)
Li, Peifeng; Yang, Ya; Huang, Yunhua; Zhang, Yue
2012-08-01
One-dimensional (1D) ZnO nanomaterials include nanowires, nanobelts, and nanorods etc. The extensive applied fields and excellent properties of 1D ZnO nanomaterials can meet the requests of the electronic and electromechanical devices for "smaller, faster and colder", and would be applied in new energy convention, environmental protection, information science and technology, biomedical, security and defense fields. While micro porous, etching pits nanodamage and brittle fracture, dissolving, functional failure nanofailure phenomena of 1D ZnO nanomaterials and nanodevices are observed in some practical working environments like illumination, currents or electric fields, external forces, and some chemical gases or solvents. The more important thing is to discuss the mechanism and reduce or prohibit their generation.
Resonant indirect exchange in 1D semiconductor nanostructures
NASA Astrophysics Data System (ADS)
Rozhansky, I. V.; Krainov, I. V.; Averkiev, N. S.; Lähderanta, E.
2015-06-01
We consider resonant indirect exchange interaction between magnetic centers in 1D nanostructures. The magnetic centers are assumed to be coupled to the 1D conducting channel by the quantum tunneling which can be of resonant character. The indirect exchange between the centers is mediated by the free carriers of the channel. The two cases of quadratic and linear energy dispersion of the 1D free carriers are considered. The former case is attributed to conventional semiconductor (InGaAs based to be concrete) nanowires or nanowhiskers, while the latter case is associated with carbon nanotubes with magnetic adatoms. We demonstrate that whenever the energy of a bound state at the magnetic center lies within the continuum energy spectra of the delocalized carriers in the channel the indirect exchange is strongly enhanced due to effective tunnel hybridization of the bound states with the continuum.
HOMOGENEOUS CATALYTIC OXIDATION OF HYDROCARBONS IN ALTERNATIVE SOLVENTS
Homogeneous Catalytic Oxidations of Hydrocarbons in Alternative Solvent Systems
Michael A. Gonzalez* and Thomas M. Becker, Sustainable Technology Division, Office of Research and Development; United States Environmental Protection Agency, 26 West Martin Luther King Drive, ...
GIS-BASED 1-D DIFFUSIVE WAVE OVERLAND FLOW MODEL
KALYANAPU, ALFRED; MCPHERSON, TIMOTHY N.; BURIAN, STEVEN J.
2007-01-17
This paper presents a GIS-based 1-d distributed overland flow model and summarizes an application to simulate a flood event. The model estimates infiltration using the Green-Ampt approach and routes excess rainfall using the 1-d diffusive wave approximation. The model was designed to use readily available topographic, soils, and land use/land cover data and rainfall predictions from a meteorological model. An assessment of model performance was performed for a small catchment and a large watershed, both in urban environments. Simulated runoff hydrographs were compared to observations for a selected set of validation events. Results confirmed the model provides reasonable predictions in a short period of time.
NASA Astrophysics Data System (ADS)
Piperel, A.; Montagne, X.; Dagaut, P.
2008-10-01
Nowadays, in diesel engines, it is typical to recycle exhaust gases (EGR) in order to decrease pollutant emissions. However, few studies report the precisely measured composition of the recycled gases. Indeed, in order to know precisely the composition of the EGR gases, they have to be sampled hot and not diluted, in contrast to the usual practice. Thus, a new system to collect such samples was developed. With this new trapping system, it is possible to measure the concentrations of NOx, CO, CO2, O2, hydrocarbons (HCs) in the range C1-C9, aldehydes, ketones and PAHs. The trapping system and the analytical protocol used are described in this paper.
Homogeneous Pt-bimetallic Electrocatalysts
Wang, Chao; Chi, Miaofang; More, Karren Leslie; Markovic, Nenad; Stamenkovic, Vojislav
2011-01-01
Alloying has shown enormous potential for tailoring the atomic and electronic structures, and improving the performance of catalytic materials. Systematic studies of alloy catalysts are, however, often compromised by inhomogeneous distribution of alloying components. Here we introduce a general approach for the synthesis of monodispersed and highly homogeneous Pt-bimetallic alloy nanocatalysts. Pt{sub 3}M (where M = Fe, Ni, or Co) nanoparticles were prepared by an organic solvothermal method and then supported on high surface area carbon. These catalysts attained a homogeneous distribution of elements, as demonstrated by atomic-scale elemental analysis using scanning transmission electron microscopy. They also exhibited high catalytic activities for the oxygen reduction reaction (ORR), with improvement factors of 2-3 versus conventional Pt/carbon catalysts. The measured ORR catalytic activities for Pt{sub 3}M nanocatalysts validated the volcano curve established on extended surfaces, with Pt{sub 3}Co being the most active alloy.
Homogeneous enzyme immunoassay for netilmicin.
Wenk, M; Hemmann, R; Follath, F
1982-01-01
A newly developed homogeneous enzyme immunoassay for the determination of netilmicin in serum was evaluated and compared with a radioenzymatic assay. A total of 102 serum samples from patients treated with netilmicin were measured by both methods. This comparison showed an excellent correlation (r = 0.993). The enzyme immunoassay has proved to be precise, accurate, and specific. Because of its rapidity and the ease of performance, this method is a useful alternative to current assays for monitoring serum netilmicin concentrations. PMID:6760807
Optical properties of LEDs with patterned 1D photonic crystal
NASA Astrophysics Data System (ADS)
Hronec, P.; Kuzma, A.; Å kriniarová, J.; Kováč, J.; Benčurová, A.; Haščík, Å.; Nemec, P.
2015-08-01
In this paper we focus on the application of the one-dimensional photonic crystal (1D PhC) structures on the top of Al0.295Ga0.705As/GaAs multi-quantum well light emitting diode (MQW LED). 1D PhC structures with periods of 600 nm, 700 nm, 800 nm, and 900 nm were fabricated by the E-Beam Direct Write (EBDW) Lithography. Effect of 1D PhC period on the light extraction enhancement was studied. 1D PhC LED radiation profiles were obtained from Near Surface Light Emission Images (NSLEI). Measurements showed the strongest light extraction enhancement using 800 nm period of PhC. Investigation of PhC LED radiation profiles showed strong light decoupling when light reaches PhC structure. Achieved LEE was from 22.6% for 600 nm PhC LED to 47.0% for 800 nm PhC LED. LED with PhC structure at its surface was simulated by FDTD simulation method under excitation of appropriate launch field.
NEW FEATURES OF HYDRUS-1D, VERSION 3.0
Technology Transfer Automated Retrieval System (TEKTRAN)
This paper briefly summarizes new features in version 3.0 of HYDRUS-1D, released in May 2005, as compared to version 2.1. The new features are a) new approaches to simulate preferential and nonequilibrium water flow and solute transport, b) a new hysteresis module that avoids the effects of pumpin...