Science.gov

Sample records for 100-b-20 1716-b maintenance

  1. Remaining Sites Verification Package for the 100-B-20, 1716-B Maintenance Garage Underground Tank, Waste Site Reclassification Form 2006-019

    SciTech Connect

    L. M. Dittmer

    2006-09-27

    The 100-B-20 waste site, located in the 100-BC-1 Operable Unit of the Hanford Site, consisted of an underground oil tank that once serviced the 1716-B Maintenance Garage. The selected action for the 100-B-20 waste site involved removal of the oil tanks and their contents and demonstrating through confirmatory sampling that all cleanup goals have been met. In accordance with this evaluation, a reclassification status of interim closed out has been determined. The results demonstrate that the site will support future unrestricted land uses that can be represented by a rural-residential scenario. These results also show that residual concentrations support unrestricted future use of shallow zone soil and that contaminant levels remaining in the soil are protective of groundwater and the Columbia River.

  2. Exposures to Emissions from Combustion of Biodiesel Fuels (B100/B20) Elicit Differential Responses in Redox-Sensitive Pathways

    EPA Science Inventory

    Exposure to airborne particulate matter (PM) is associated with higher risk for cardiopulmonary diseases but mechanisms for the effects remain unknown. Combustion of biodiesel fuels (BD) is associated with lower emission of PM but the health consequences of exposure to exhaust fr...

  3. Preventative Maintenance.

    ERIC Educational Resources Information Center

    Migliorino, James

    Boards of education must be convinced that spending money up front for preventive maintenance will, in the long run, save districts' tax dollars. A good program of preventive maintenance can minimize disruption of service; reduce repair costs, energy consumption, and overtime; improve labor productivity and system equipment reliability; handle…

  4. Software Maintenance.

    ERIC Educational Resources Information Center

    Cannon, Glenn; Jobe, Holly

    Proper cleaning and storage of audiovisual aids is outlined in this brief guide. Materials and equipment needed for first line maintenance are listed, as well as maintenance procedures for records, audio and video tape, film, filmstrips, slides, realia, models, prints, graphics, maps, and overhead transparencies. A 15-item quiz on software…

  5. Maintenance Downtime

    Atmospheric Science Data Center

    2013-07-10

    ... will be unavailable March 5, 2013 8:00 am to 5:00 pm due to database maintenance. Date(s):  Tuesday, March 5, 2013 ... will be unavailable March 5, 2013 8:00 am to 5:00 pm due to database maintenance. ...

  6. Maintenance Budgeting.

    ERIC Educational Resources Information Center

    Smith, J. McCree

    Three methods for the preparation of maintenance budgets are discussed--(1) a traditional method, inconclusive and obsolete, based on gross square footage, (2) the formula approach method based on building classification (wood-frame, masonry-wood, masonry-concrete) with maintenance cost factors for each type plus custodial service rates by type of…

  7. Privatizing Maintenance.

    ERIC Educational Resources Information Center

    Hounsell, Dan

    1996-01-01

    Schools and other government facilities want to see whether privatization of maintenance can provide services as efficiently and at less cost than inhouse workers. Privatization proponents say that everyone will benefit the most if the bidding process involves competition. Offers examples from the Memphis City Schools and the Union Public Schools…

  8. Periodontal maintenance.

    PubMed

    Tan, A E S

    2009-09-01

    The main goal of periodontal therapy is to establish an oral environment compatible with periodontal health by the physical disruption of the plaque biofilm and adjunctive chemical means if required. Implicit in this objective is the ongoing requirement of detection and interception of new and recurrent disease, which continues at selected intervals for the life of the dentition after the initial ("active") phase of periodontal treatment. This concept of ongoing periodontal maintenance therapy has been embraced as the mandatory requirement for favourable periodontal outcomes based on institutional clinical trials and in practice-based studies in various parts of the world. This review examines the ramifications of periodontal maintenance therapy based upon a multi-level assessment of logistic issues and risk factors at three levels: (1) The patient level - treatment time; patient attendance compliance; and homecare measures, antiseptics/antibiotics and smoking. (2) The level of the individual tooth - tooth loss; and evaluation of success versus survival. (3) The level of each tooth surface ("site") - probing depth, loss of attachment and bleeding on probing; and changes in clinical attachment levels. In spite of the diversity of studies conducted, there is agreement on the efficacy of periodontal maintenance therapy when compared with studies on untreated populations and in treated cases that were not maintained. PMID:19737263

  9. Maintenance Business Plans.

    ERIC Educational Resources Information Center

    Adams, Matt

    2002-01-01

    Discusses maintenance business plans, statements which provide accountability for facilities maintenance organizations' considerable budgets. Discusses the plan's components: statement of plan objectives, macro and detailed description of the facility assets, maintenance function descriptions, description of key performance indicators, milestone…

  10. Cryogenics maintenance strategy

    NASA Astrophysics Data System (ADS)

    Cruzat, Fabiola

    2012-09-01

    ALMA is an interferometer composed of 66 independent systems, with specific maintenance requirements for each subsystem. To optimize the observation time and reduce downtime maintenance, requirements are very demanding. One subsystem with high maintenance efforts is cryogenics and vacuum. To organize the maintenance, the Cryogenic and Vacuum department is using and implementing different tools. These are monitoring and problem reporting systems and CMMS. This leads to different maintenance approaches: Preventive Maintenance, Corrective Maintenance and Condition Based Maintenance. In order to coordinate activities with other departments the preventive maintenance schedule is kept as flexible as systems allow. To cope with unavoidable failures, the team has to be prepared to work under any condition with the spares on time. Computerized maintenance management system (CMMS) will help to manage inventory control for reliable spare part handling, the correct record of work orders and traceability of maintenance activities. For an optimized approach the department is currently evaluating where preventive or condition based maintenance applies to comply with the individual system demand. Considering the change from maintenance contracts to in-house maintenance will help to minimize costs and increase availability of parts. Due to increased number of system and tasks the cryo team needs to grow. Training of all staff members is mandatory, in depth knowledge must be built up by doing complex maintenance activities in the Cryo group, use of advanced computerized metrology systems.

  11. Facilities maintenance handbook

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This handbook is a guide for facilities maintenance managers. Its objective is to set minimum facilities maintenance standards. It also provides recommendations on how to meet the standards to ensure that NASA maintains its facilities in a manner that protects and preserves its investment in the facilities in a cost-effective manner while safely and efficiently performing its mission. This handbook implements NMI 8831.1, which states NASA facilities maintenance policy and assigns organizational responsibilities for the management of facilities maintenance activities on all properties under NASA jurisdiction. It is a reference for facilities maintenance managers, not a step-by-step procedural manual. Because of the differences in NASA Field Installation organizations, this handbook does not assume or recommend a typical facilities maintenance organization. Instead, it uses a systems approach to describe the functions that should be included in any facilities maintenance management system, regardless of its organizational structure. For documents referenced in the handbook, the most recent version of the documents is applicable. This handbook is divided into three parts: Part 1 specifies common definitions and facilities maintenance requirements and amplifies the policy requirements contained in NMI 8831. 1; Part 2 provides guidance on how to meet the requirements of Part 1, containing recommendations only; Part 3 contains general facilities maintenance information. One objective of this handbook is to fix commonality of facilities maintenance definitions among the Centers. This will permit the application of uniform measures of facilities conditions, of the relationship between current replacement value and maintenance resources required, and of the backlog of deferred facilities maintenance. The utilization of facilities maintenance system functions will allow the Centers to quantitatively define maintenance objectives in common terms, prepare work plans, and

  12. Asphalt in Pavement Maintenance.

    ERIC Educational Resources Information Center

    Asphalt Inst., College Park, MD.

    Maintenance methods that can be used equally well in all regions of the country have been developed for the use of asphalt in pavement maintenance. Specific information covering methods, equipment and terminology that applies to the use of asphalt in the maintenance of all types of pavement structures, including shoulders, is provided. In many…

  13. Light Vehicle Preventive Maintenance.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    This correspondence course, originally developed for the Marine Corps, is designed to instruct students in the performance of preventive maintenance on motor vehicles. Instructional materials are presented in three chapters as follows: (1) Major Maintenance Areas (maintenance system, tires, batteries, cooling systems, and vehicle lubrication; (2)…

  14. Defer Maintenance, Invite Disaster

    ERIC Educational Resources Information Center

    Bowman, William W.

    1977-01-01

    An AGB- and NACUBO-sponsored survey showed that "wish lists" are accumulating overdue major maintenance projects because energy costs are consuming physical plant budgets. Problem areas are discussed: budget "guesstimation," preventive maintenance, deferred maintenance inventory, the APPA accounting format, resource allocation, and inflation.…

  15. Innovation for maintenance technology improvements

    NASA Technical Reports Server (NTRS)

    Shives, T. R. (Editor); Willard, W. A. (Editor)

    1982-01-01

    A group of 34 submitted entries (32 papers and 2 abstracts) from the 33rd meeting of the Mechanical Failures Prevention Group whose subject was maintenance technology improvement through innovation. Areas of special emphasis included maintenance concepts, maintenance analysis systems, improved maintenance processes, innovative maintenance diagnostics and maintenance indicators, and technology improvements for power plant applications.

  16. Industrial Maintenance Strategies

    SciTech Connect

    Sajjad Akbar

    2006-07-01

    Industrial plants have become more complex due to technological advancement. This has made the task of maintenance more difficult. The maintenance costs in terms of resources and downtime loss are so high that maintenance function has become a critical factor in a plant's profitability. Industry should devote as much forethought to the management of maintenance function as to production. Maintenance has grown from an art to a precise, technical engineering science. Planning, organizing scheduling and control of maintenance using modern techniques pays dividends in the form of reduced costs and increased reliability. The magnitude and the dimension of maintenance have multiplied due to development in the engineering technologies. Production cost and capacities are directly affected by the breakdown time. Total operating cost including the maintenance cost plays an important role in replacement dimension. The integrated system approach would bring forth the desired results of high maintenance standards. The standards once achieved and sustained, would add to the reliability of the plan and relieve heavy stresses and strains on the engineering logistic support. (author)

  17. Maintenance of School Gymnasiums.

    ERIC Educational Resources Information Center

    Finchum, R. N.

    1965-01-01

    Procedures are suggested that may be helpful to those responsible for the operation and maintenance of school buildings and gymnasiums. Most schools with gymnasiums utilize them for both instructional and sports purposes. Maintenance of the multipurpose gym are discussed under four subject areas--(1) floors, (2) lighting, (3) sanitation, and (4)…

  18. Maintenance Trades Guidelines

    ERIC Educational Resources Information Center

    Weidner, Theodore J.

    2008-01-01

    In 2002, APPA published "Maintenance Staffing Guidelines for Educational Facilities," the first building maintenance trades staffing guideline designed to assist educational facilities professionals with their staffing needs. addresses how facilities professionals can determine the appropriate size and mix of their organization. Contents include…

  19. Halt Runaway Maintenance Costs.

    ERIC Educational Resources Information Center

    Trotter, Andrew

    1988-01-01

    To keep expensive computer software and hardware functioning requires good housekeeping, some protective equipment, ground rules, and supervision. Schools can arrange microcomputer maintenance through service agreements with computer manufacturers, pay-as-you-go service from local computer stores, or setting up their own maintenance and repair…

  20. Fixing Maintenance Productivity.

    ERIC Educational Resources Information Center

    Fickes, Michael

    2003-01-01

    Describes how one university's facility managers use Nextel communications technology in conjunction with a Famis Software maintenance management system to improve the productivity of its maintenance technicians. The system uses a wireless Internet connection to automate the flow of work order information to and from technicians. The key to these…

  1. Maximizing Hard Floor Maintenance.

    ERIC Educational Resources Information Center

    Steger, Michael

    2000-01-01

    Explains the maintenance options available for hardwood flooring that can help ensure long life cycles and provide inviting spaces. Developing a maintenance system, knowing the type of traffic that the floor must endure, using entrance matting, and adhering to manufacturers guidelines are discussed. Daily, monthly or quarterly, and long-term…

  2. Powerful drivers for maintenance.

    PubMed

    Mason, Steve

    2013-10-01

    A UPS system is the central building block of a Power Continuity Plan in medical facilities, but such equipment requires careful maintenance to continue fulfilling its vital role in delivering power resilience, and avoid catastrophic downtime, and potentially tens of thousands of pounds in costs to rectify the issues caused by poor maintenance. In our latest technical guidance article, Steve Mason, MD at Bender UK, one of the leading providers of isolated power supplies, theatre control panels, UPS systems, and Steris surgical products, and a turnkey provider of solutions for safe handling of electrical power and advanced provision of critical care products, examines some of the issue surrounding UPS maintenance. PMID:24341105

  3. Maintenance of Automated Library Systems.

    ERIC Educational Resources Information Center

    Epstein, Susan Baerg

    1983-01-01

    Discussion of the maintenance of both the software and hardware in an automated library system highlights maintenance by the vendor, contracts and costs, the maintenance log, downtime, and planning for trouble. (EJS)

  4. Getting into Motorcycle Maintenance

    ERIC Educational Resources Information Center

    Mosher, Lynn

    1978-01-01

    This article tells how to start a high school course in motorcycle maintenance and includes names and addresses of some motorcycle manufacturers and a list of needed tools, equipment, and materials. (MF)

  5. Computerized Fleet Maintenance.

    ERIC Educational Resources Information Center

    Cataldo, John J.

    1985-01-01

    The Computerized Fleet Maintenance (CFM) program of a New York school district has major component areas of garage operation, vehicle replacement, and fuel consumption. CFM detects high expenditures and provides the rationale for bus replacement. (MLF)

  6. Carpet Maintenance Guide.

    ERIC Educational Resources Information Center

    Griffin, William R.

    1999-01-01

    Discusses ways to make carpet maintenance in schools easier and effective for keeping carpeted areas in schools attractive and long lasting. Covers cleaning tips for basic spills, ideas for staying on top of stains, and suggestions for eliminating odors. (GR)

  7. [Medical Equipment Maintenance Methods].

    PubMed

    Liu, Hongbin

    2015-09-01

    Due to the high technology and the complexity of medical equipment, as well as to the safety and effectiveness, it determines the high requirements of the medical equipment maintenance work. This paper introduces some basic methods of medical instrument maintenance, including fault tree analysis, node method and exclusive method which are the three important methods in the medical equipment maintenance, through using these three methods for the instruments that have circuit drawings, hardware breakdown maintenance can be done easily. And this paper introduces the processing methods of some special fault conditions, in order to reduce little detours in meeting the same problems. Learning is very important for stuff just engaged in this area. PMID:26904890

  8. Care and Maintenance.

    ERIC Educational Resources Information Center

    Hampton, Carolyn H.; Hampton, Carol D.

    1979-01-01

    The classroom care and maintenance of terrestrial isopods is described. Includes illustrations of isopod external anatomy, a potato trap for collecting isopods, and a constructed habitat for raising isopods. (MA)

  9. Lunar robotic maintenance module

    NASA Technical Reports Server (NTRS)

    Ayres, Michael L.

    1988-01-01

    A design for a robotic maintenance module that will assist a mobile 100-meter lunar drill is introduced. The design considers the following areas of interest: the atmospheric conditions, actuator systems, power supply, material selection, weight, cooling system and operation.

  10. Automating Preventive Maintenance.

    ERIC Educational Resources Information Center

    Oshier, Michael J.

    1984-01-01

    Describes the following aspects of the State University of New York-Brockport's preventive maintenance computerization project: (1) software selection, (2) project implementation; and (3) problems and benefits of the system. (MCG)

  11. Woodwind Instrument Maintenance.

    ERIC Educational Resources Information Center

    Sperl, Gary

    1980-01-01

    The author presents a simple maintenance program for woodwind instruments which includes the care of tendon corks, the need for oiling keys, and methods of preventing cracks in woodwind instruments. (KC)

  12. Maintenance strategies for greater availability

    SciTech Connect

    Pradhan, S. )

    1994-01-01

    Benchmark studies have confirmed there is a very wide gap in perceived world-class versus actual maintenance performance. To bridge this gap, companies will have to quickly adopt appropriate preventive and predictive maintenance practices and implement total productive maintenance (TPM) and reliability centered maintenance (RCM) practices. In process plants the whole approach to maintenance is slipshod, with a jumble of acronyms like PM/RM/CPM/flexing/multi-skilling, etc., giving a false sense of progress. North American maintenance benchmarks and British maintenance best practice give a very clear picture of current maintenance practices. Both of these studies indicate that breakdown maintenance is the dominant mode of maintenance in the progress industries. There are several key steps to be followed in establishing a strategy for maintenance improvements: (1) Recognize maintenance as an executive function; (2) Establish a solid maintenance performance database; (3) Review the existing plant maintenance practices; (4) Review and understand world-class maintenance practices; and (5) Design a master plan for a world-class system: Define the plant and maintenance resources; Define multi-skilling strategy; Define training and education levels for each job grouping; and Apply, and don't just talk about TPM and RCM.

  13. Antimicrobials in periodontal maintenance.

    PubMed

    Jorgensen, M G; Slots, J

    2001-01-01

    Mechanical and chemical antimicrobial intervention is the mainstay of preventive periodontal therapy. Successful periodontal maintenance care depends upon the ability of oral health care professionals to combat periodontal infections, and patient compliance with prescribed follow-up care. Since tooth brushing, flossing, and oral rinsing do not reach pathogens present in furcations and at the depths of deep periodontal pockets, adequate oral hygiene should include subgingival treatment with home irrigators or other appropriate self-care remedies in patients with these conditions. Povidone-iodine for professional use and diluted bleach for self-care are inexpensive and valuable antimicrobial agents in periodontal maintenance. The present article outlines the prudent use of antimicrobial therapy in periodontal maintenance. PMID:11603305

  14. Reliability Centered Maintenance - Methodologies

    NASA Technical Reports Server (NTRS)

    Kammerer, Catherine C.

    2009-01-01

    Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

  15. Maintenance simulation: Software issues

    SciTech Connect

    Luk, C.H.; Jette, M.A.

    1995-07-01

    The maintenance of a distributed software system in a production environment involves: (1) maintaining software integrity, (2) maintaining and database integrity, (3) adding new features, and (4) adding new systems. These issues will be discussed in general: what they are and how they are handled. This paper will present our experience with a distributed resource management system that accounts for resources consumed, in real-time, on a network of heterogenous computers. The simulated environments to maintain this system will be presented relate to the four maintenance areas.

  16. Maintenance Crisis vs Solutions.

    ERIC Educational Resources Information Center

    Haggard, Susie

    Industrial maintenance in Northeast Georgia is facing an acute crisis. Contributing factors are economic development that is depleting the work force, aging of the population, downsizing of the military, and lack of technical school graduates. Solutions to the crisis fall into three categories: short-term, mid-term, and long-term. For short-term…

  17. Floors: Selection and Maintenance.

    ERIC Educational Resources Information Center

    Berkeley, Bernard

    Flooring for institutional, commercial, and industrial use is described with regard to its selection, care, and maintenance. The following flooring and subflooring material categories are discussed--(1) resilient floor coverings, (2) carpeting, (3) masonry floors, (4) wood floors, and (5) "formed-in-place floors". The properties, problems,…

  18. Industrial Mechanical Maintenance.

    ERIC Educational Resources Information Center

    Hendrix, Laborn J.

    This manual was developed to assist teachers in Oklahoma in preparing students for industrial mechanical maintenance. The materials in this teacher's guide are organized in 14 units of instruction covering the following four areas: receiving and setting equipment; equipment hookup and operation; equipment layout, anchoring, and setup; and…

  19. Home Maintenance Manual.

    ERIC Educational Resources Information Center

    Richmond, Jim; And Others

    This manual, written especially for the Navajo and Hopi Indian Relocation Commission, is a simply worded, step-by-step guide to home maintenance for new homeowners. It can be used for self-study or it can serve as instructional material for a training class on home ownership. The manual is organized in nine sections that cover the following…

  20. CH Packaging Maintenance Manual

    SciTech Connect

    Washington TRU Solutions

    2002-01-02

    This procedure provides instructions for performing inner containment vessel (ICV) and outer containment vessel (OCV) maintenance and periodic leakage rate testing on the following packaging seals and corresponding seal surfaces using a nondestructive helium (He) leak test. In addition, this procedure provides instructions for performing ICV and OCV structural pressure tests.

  1. Floors: Care and Maintenance.

    ERIC Educational Resources Information Center

    Post Office Dept., Washington, DC.

    Guidelines, methods and policies regarding the care and maintenance of post office building floors are overviewed in this handbook. Procedures outlined are concerned with maintaining a required level of appearance without wasting manpower. Flooring types and characteristics and the particular cleaning requirements of each type are given along with…

  2. Diesel Vehicle Maintenance Competencies.

    ERIC Educational Resources Information Center

    Braswell, Robert; And Others

    Designed to provide a model set of competencies, this manual presents tasks which were identified by employers, employees, and teachers as important in a postsecondary diesel vehicle maintenance curriculum. The tasks are divided into seven major component areas of instruction: chassis and suspension, diesel engines, diesel fuel, electrical,…

  3. Operations and maintenance philosophy

    SciTech Connect

    DUNCAN, G.P.

    1999-10-28

    This Operations and Maintenance (O&M) Philosophy document is intended to establish a future O&M vision, with an increased focus on minimizing worker exposure, ensuring uninterrupted retrieval operations, and minimizing operation life-cycle cost. It is intended that this document would incorporate O&M lessons learned into on-going and future project upgrades.

  4. Summer Roof Maintenance.

    ERIC Educational Resources Information Center

    Liscum, Curtis L.

    1999-01-01

    Presents the items to review in roofing maintenance to prepare for the impact of summer, including checking drainage, roof-field surface and membrane, flashings, sheet metal, and rooftop equipment, such as skylights and penthouses. A list of roofing facts facility managers should know are highlighted. (GR)

  5. Computerized Fleet Maintenance.

    ERIC Educational Resources Information Center

    Cataldo, John J.

    The computerization of school bus maintenance records by the Niskayuna (New York) Central School District enabled the district's transportation department to engage in management practices resulting in significant savings. The district obtains computer analyses of the work performed on all vehicles, including time spent, parts, labor, costs,…

  6. School Maintenance Needs

    ERIC Educational Resources Information Center

    Erickson, Paul W.

    2011-01-01

    The United States is full of schools built in the 1950s and 60s that supported the boomer school-age enrollment increase. These schools, once beacons of the neighborhood, are 50 to 60 years old and susceptible to becoming the community "eyesore." Budgeting for maintenance was fairly systematic for school districts for the first 10 to 20 years…

  7. Electrical Maintenance Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document contains 30 units to consider for use in a tech prep competency profile for the occupation of electrical maintenance technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific…

  8. Care and Maintenance.

    ERIC Educational Resources Information Center

    Hampton, Carol D.; Hampton, Carolyn H.

    1980-01-01

    Described is a method for bringing the sea into the classroom by setting up a saltwater aquarium. Included is selection of an aquarium, filtering systems, water (whether natural salt or synthetic sea salts), bottom materials, setting up an aquarium, system stabilization, stocking an aquarium, and maintenance of the aquarium. (DS)

  9. Terminal automation system maintenance

    SciTech Connect

    Coffelt, D.; Hewitt, J.

    1997-01-01

    Nothing has improved petroleum product loading in recent years more than terminal automation systems. The presence of terminal automation systems (TAS) at loading racks has increased operational efficiency and safety and enhanced their accounting and management capabilities. However, like all finite systems, they occasionally malfunction or fail. Proper servicing and maintenance can minimize this. And in the unlikely event a TAS breakdown does occur, prompt and effective troubleshooting can reduce its impact on terminal productivity. To accommodate around-the-clock loading at racks, increasingly unattended by terminal personnel, TAS maintenance, servicing and troubleshooting has become increasingly demanding. It has also become increasingly important. After 15 years of trial and error at petroleum and petrochemical storage and transfer terminals, a number of successful troubleshooting programs have been developed. These include 24-hour {open_quotes}help hotlines,{close_quotes} internal (terminal company) and external (supplier) support staff, and {open_quotes}layered{close_quotes} support. These programs are described.

  10. Flight Crew Health Maintenance

    NASA Technical Reports Server (NTRS)

    Gullett, C. C.

    1970-01-01

    The health maintenance program for commercial flight crew personnel includes diet, weight control, and exercise to prevent heart disease development and disability grounding. The very high correlation between hypertension and overweight in cardiovascular diseases significantly influences the prognosis for a coronary prone individual and results in a high rejection rate of active military pilots applying for civilian jobs. In addition to physical fitness the major items stressed in pilot selection are: emotional maturity, glucose tolerance, and family health history.

  11. Maintenance of hydrostatic transmissions

    NASA Astrophysics Data System (ADS)

    Esposito, A.

    1981-10-01

    Problems in hydrostatic transmission maintenance are identified and ways of overcoming them are suggested. It is found that problems arise from lack of lubrication, impurities in the oil, and cavitation at the pump and at the motor. It is under suggested that under nonsevere operating conditions, oil and filter should be changed every year, or every 1500 to 2000 hr running time. Under severe operating conditions or in dusty environments, the interval should be every 6 months or 1000 hr.

  12. Proposed SOLCOST maintenance activities

    SciTech Connect

    1980-01-01

    This document provides a short description of work that has been accomplished to date and work in progress. A discussion of the program status as it is currently configured follows and finally proposed work by Solar Environmental Engineering Company (SEEC) in its most recently signed contract with the Department of Energy (DOE) is given. Early statements are designed to give the reader a good background so that the suggested SOLCOST maintenance activities will be more easily understood.

  13. AUTOMOTIVE DIESEL MAINTENANCE. PROGRAM OUTLINE.

    ERIC Educational Resources Information Center

    Human Engineering Inst., Cleveland, OH.

    INFORMATIONAL TOPICS COVERED IN THE TEXT MATERIALS AND SELF-INSTRUCTIONAL BRANCH PROGRAMED TRAINING FILMS FOR A 2-YEAR, 55 MODULE PROGRAM IN AUTOMOTIVE DIESEL MAINTENANCE ARE GIVEN. THE 30 MODULES FOR "AUTOMOTIVE DIESEL MAINTENANCE 1" ARE AVAILABLE AS VT 005 655 - VT 005 684, AND THE 25 MODULES FOR "AUTOMOTIVE DIESEL MAINTENANCE 2" ARE AVAILABLE…

  14. Designing with Maintenance in Mind.

    ERIC Educational Resources Information Center

    Hoffman, Kisty

    2002-01-01

    When planning for a new facility, consideration of maintenance needs is crucial to successful design. Designing for maintenance needs involves considering such factors as the durability of materials used, the cost and lifecycle of the materials, and the flexibility of the maintenance staff. Stresses the importance of including key members of the…

  15. PREVENTIVE MAINTENANCE. HONEYWELL PLANNING GUIDE.

    ERIC Educational Resources Information Center

    Honeywell, Inc., Minneapolis, Minn.

    THIS HONEYWELL PAMPHLET DISCUSSES SOME ASPECTS OF PREVENTIVE MAINTENANCE OF AUTOMATIC CONTROLS, HEATING, VENTILATING, AND AIR CONDITIONING, AND COMPARES IN-PLANT WITH CONTRACT SERVICE, CONCLUDING THAT CONTRACT SERVICE IS PREFERABLE AND DESCRIBING A NUMBER OF MAINTENANCE PLANS WHICH THEY FURNISH. PREVENTIVE MAINTENANCE PROVIDES--(1) MORE EFFICIENT…

  16. General aviation avionics equipment maintenance

    NASA Technical Reports Server (NTRS)

    Parker, C. D.; Tommerdahl, J. B.

    1978-01-01

    Maintenance of general aviation avionics equipment was investigated with emphasis on single engine and light twin engine general aviation aircraft. Factors considered include the regulatory agencies, avionics manufacturers, avionics repair stations, the statistical character of the general aviation community, and owners and operators. The maintenance, environment, and performance, repair costs, and reliability of avionics were defined. It is concluded that a significant economic stratification is reflected in the maintenance problems encountered, that careful attention to installations and use practices can have a very positive impact on maintenance problems, and that new technologies and a general growth in general aviation will impact maintenance.

  17. Paranal maintenance and CMMS experience

    NASA Astrophysics Data System (ADS)

    Montano, Nelson

    2004-10-01

    During the last four years of operations, low technical downtime has been one of the relevant records of the Paranal Observatory. From the beginning of the Very Large Telescope (VLT) project, European Southern Observatory (ESO) has considered the implementation of a proper maintenance strategy a fundamental point in order to ensure low technical down time and preserve the Observatory's assets. The implementation of the maintenance strategy was based on the following aspects: - Strong maintenance sense during the design stage. Line Replacement Unit (LRU) concept, standardization and modularity of the Observatory equipment - Creation of a dedicated team for Maintenance - The implementation of a Computerized Maintenance Management System After four operational years, the result of these aspects has exceeded the expectations; the Observatory has been operating with high availability under a sustainable strategy. The strengths of the maintenance strategy have been based on modern maintenance concepts applied by regular production companies, where any minute of down time involves high cost. The operation of the actual Paranal Maintenance System is based mainly on proactive activities, such as regular inspections, preventive maintenance (PM) and predictive maintenance (PdM) plans. Nevertheless, it has been necessary to implement a strong plan for corrective maintenance (CM). The Spare Parts Strategy has also been an important point linked to the Maintenance Strategy and CMMS implementation. At present, almost 4,000 items related to the Observatory spare parts are loaded into the CMMS database. Currently, we are studying the implementation of a Reliability Centered Maintenance (RCM) project in one of our critical systems The following document presents the actual status of the Paranal Maintenance Strategy and which have been the motivations to implement the established strategy.

  18. Remote maintenance monitoring system

    NASA Technical Reports Server (NTRS)

    Simpkins, Lorenz G. (Inventor); Owens, Richard C. (Inventor); Rochette, Donn A. (Inventor)

    1992-01-01

    A remote maintenance monitoring system retrofits to a given hardware device with a sensor implant which gathers and captures failure data from the hardware device, without interfering with its operation. Failure data is continuously obtained from predetermined critical points within the hardware device, and is analyzed with a diagnostic expert system, which isolates failure origin to a particular component within the hardware device. For example, monitoring of a computer-based device may include monitoring of parity error data therefrom, as well as monitoring power supply fluctuations therein, so that parity error and power supply anomaly data may be used to trace the failure origin to a particular plane or power supply within the computer-based device. A plurality of sensor implants may be rerofit to corresponding plural devices comprising a distributed large-scale system. Transparent interface of the sensors to the devices precludes operative interference with the distributed network. Retrofit capability of the sensors permits monitoring of even older devices having no built-in testing technology. Continuous real time monitoring of a distributed network of such devices, coupled with diagnostic expert system analysis thereof, permits capture and analysis of even intermittent failures, thereby facilitating maintenance of the monitored large-scale system.

  19. Towards automated traceability maintenance.

    PubMed

    Mäder, Patrick; Gotel, Orlena

    2012-10-01

    Traceability relations support stakeholders in understanding the dependencies between artifacts created during the development of a software system and thus enable many development-related tasks. To ensure that the anticipated benefits of these tasks can be realized, it is necessary to have an up-to-date set of traceability relations between the established artifacts. This goal requires the creation of traceability relations during the initial development process. Furthermore, the goal also requires the maintenance of traceability relations over time as the software system evolves in order to prevent their decay. In this paper, an approach is discussed that supports the (semi-) automated update of traceability relations between requirements, analysis and design models of software systems expressed in the UML. This is made possible by analyzing change events that have been captured while working within a third-party UML modeling tool. Within the captured flow of events, development activities comprised of several events are recognized. These are matched with predefined rules that direct the update of impacted traceability relations. The overall approach is supported by a prototype tool and empirical results on the effectiveness of tool-supported traceability maintenance are provided. PMID:23471308

  20. Towards automated traceability maintenance

    PubMed Central

    Mäder, Patrick; Gotel, Orlena

    2012-01-01

    Traceability relations support stakeholders in understanding the dependencies between artifacts created during the development of a software system and thus enable many development-related tasks. To ensure that the anticipated benefits of these tasks can be realized, it is necessary to have an up-to-date set of traceability relations between the established artifacts. This goal requires the creation of traceability relations during the initial development process. Furthermore, the goal also requires the maintenance of traceability relations over time as the software system evolves in order to prevent their decay. In this paper, an approach is discussed that supports the (semi-) automated update of traceability relations between requirements, analysis and design models of software systems expressed in the UML. This is made possible by analyzing change events that have been captured while working within a third-party UML modeling tool. Within the captured flow of events, development activities comprised of several events are recognized. These are matched with predefined rules that direct the update of impacted traceability relations. The overall approach is supported by a prototype tool and empirical results on the effectiveness of tool-supported traceability maintenance are provided. PMID:23471308

  1. Maintenance and supply options

    NASA Technical Reports Server (NTRS)

    1988-01-01

    The object of the Maintenance and Supply Option was to develop a high level operational philosophy related to maintenance and supply operations and incorporate these concepts into the Lunar Base Study. Specific products to be generated during this task were three trade studies and a conceptual design of the Logistic Supply Module. The crew size study was performed to evaluate crew sizes from the baseline size of four to a crew size of eight and determine the preferred crew size. The second trade study was to determine the impact of extending surface stay times and recommend a preferred duration of stay time as a function of crew, consumables, and equipment support capabilities. The third trade study was an evaluation of packaging and storage methods to determine the preferred logistics approach to support the lunar base. A modified scenario was developed and served as the basis of the individual trade studies. Assumptions and guidelines were also developed from experience with Apollo programs, Space Shuttle operations, and Space Station studies. With this information, the trade studies were performed and a conceptual design for the Logistic Supply Module was developed.

  2. 22 CFR 120.38 - Maintenance levels.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... § 120.38 Maintenance levels. (a) Organizational-level maintenance (or basic-level maintenance) is the first level of maintenance that can be performed “on-equipment” (directly on the defense article or... defense article. (b) Intermediate-level maintenance is second-level maintenance performed...

  3. Risk-based maintenance modeling. Prioritization of maintenance importances and quantification of maintenance effectiveness

    SciTech Connect

    Vesely, W.E.; Rezos, J.T.

    1995-09-01

    This report describes methods for prioritizing the risk importances of maintenances using a Probabilistic Risk Assessment (PRA). Approaches then are described for quantifying their reliability and risk effects. Two different PRA importance measures, minimal cutset importances and risk reduction importances, were used to prioritize maintenances; the findings show that both give similar results if appropriate criteria are used. The justifications for the particular importance measures also are developed. The methods developed to quantify the reliability and risk effects of maintenance actions are extensions of the usual reliability models now used in PRAs. These extended models consider degraded states of the component, and quantify the benefits of maintenance in correcting degradations and preventing failures. The negative effects of maintenance, including downtimes, also are included. These models are specific types of Markov models. The data for these models can be obtained from plant maintenance logs and from the Nuclear Plant Reliability Data System (NPRDS). To explore the potential usefulness of these models, the authors analyzed a range of postulated values of input data. These models were used to examine maintenance effects on a components reliability and performance for various maintenance programs and component data. Maintenance schedules were analyzed to optimize the component`s availability. In specific cases, the effects of maintenance were found to be large.

  4. DCSP hardware maintenance system

    SciTech Connect

    Pazmino, M.

    1995-11-01

    This paper discusses the necessary changes to be implemented on the hardware side of the DCSP database. DCSP is currently tracking hardware maintenance costs in six separate databases. The goal is to develop a system that combines all data and works off a single database. Some of the tasks that will be discussed in this paper include adding the capability for report generation, creating a help package and preparing a users guide, testing the executable file, and populating the new database with data taken from the old database. A brief description of the basic process used in developing the system will also be discussed. Conclusions about the future of the database and the delivery of the final product are then addressed, based on research and the desired use of the system.

  5. Insect maintenance and transmission.

    PubMed

    Kingdom, Heather

    2013-01-01

    Phytoplasmas are plant pathogens of huge economic importance due to responsibility for crop yield losses worldwide. Institutions around the world are trying to understand and control this yield loss at a time when food security is high on government agendas. In order to fully understand the mechanisms of phytoplasma infection and spread, more insect vector and phytoplasma colonies will need to be established for research worldwide. Rearing and study of these colonies is essential in the research and development of phytoplasma control measures. This chapter highlights general materials and methods for raising insect vector colonies and maintenance of phytoplasmas. Specific methods of rearing the maize leafhopper and maize bushy stunt phytoplasma and the aster leafhopper and aster yellows phytoplasma strain witches' broom are also included. PMID:22987405

  6. Maintenance of certification.

    PubMed

    Rhodes, Robert S

    2007-02-01

    Maintenance of Certification (MOC) is the most recent stage in the evolution of specialty board certification. Driven by increasing concerns over the quality and safety of medical care, MOC represents a change in the frequency and the nature of the requirements of existing recertification. Under MOC, the every 10-year snapshot of professionalism, participation in continuing medical education, and medical expertise that are part of current recertification will become a more continuous process. MOC adds the assessment of practice performance to these measures and represents a philosophical change as well as a requirement change. The focus of these assessments is for improvement rather than judgment. The extent to which MOC succeeds will reflect surgeons' ability to improve the quality of care through voluntary efforts. PMID:17305290

  7. TCMS operations and maintenance philosophy

    NASA Technical Reports Server (NTRS)

    Buehler, David P.; Griffin, Rock E.

    1992-01-01

    The purpose is to describe the basic philosophies of operating and maintaining the Test, Control, and Monitor System (TCMS) equipment. TCMS is a complex and sophisticated checkout system. Operations and maintenance processes developed to support it will be based upon current experience, but will be focused on the specific needs of TCMS in support of Space Station Freedom Program (SSFP) and related activities. An overview of the operations and maintenance goals and philosophies are presented. The assumptions, roles and responsibilities, concepts and interfaces for operation, on-line maintenance, off-line support, and Operations and Maintenance (O&M) personnel training on all TCMS equipment located at KSC are described.

  8. Space shuttle maintenance program planning document

    NASA Technical Reports Server (NTRS)

    Brown, D. V.

    1972-01-01

    A means for developing a space shuttle maintenance program which will be acceptable to the development centers, the operators (KSC and AF), and the manufacturer is presented. The general organization and decision processes for determining the essential scheduled maintenance requirements for the space shuttle orbiter are outlined. The development of initial scheduled maintenance programs is discussed. The remaining maintenance, that is non-scheduled or non-routine maintenance, is directed by the findings of the scheduled maintenance program and the normal operation of the shuttle. The remaining maintenance consists of maintenance actions to correct discrepancies noted during scheduled maintenance tasks, nonscheduled maintenance, normal operation, or condition monitoring.

  9. Illinois Occupational Skill Standards: Industrial Maintenance General Maintenance Cluster.

    ERIC Educational Resources Information Center

    Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

    These skill standards for the industrial maintenance general maintenance cluster are intended to be a guide to workforce preparation program providers in defining content for their programs and to employers to establish the skills and standards necessary for job acquisition. An introduction provides the Illinois perspective; Illinois Occupational…

  10. IMIS: Integrated Maintenance Information System. A maintenance information delivery concept

    NASA Technical Reports Server (NTRS)

    Vonholle, Joseph C.

    1987-01-01

    The Integrated Maintenance Information System (IMIS) will optimize the use of available manpower, enhance technical performance, improve training, and reduce the support equipment and documentation needed for deployment. It will serve as the technician's single, integrated source of all the technical information required to perform modern aircraft maintenance.

  11. Landscaping With Maintenance in Mind.

    ERIC Educational Resources Information Center

    Sorensen, Randy

    2000-01-01

    Examines school ground landscape design that enhances attractive of the school and provides for easier maintenance. Landscape design issues discussed include choice of grass, trees, and shrubs; irrigation; and safety and access. Other considerations for lessening maintenance problems for facility managers are also highlighted. (GR)

  12. Cognitive Load and Maintenance Rehearsal.

    ERIC Educational Resources Information Center

    Naveh-Benjamin, Moshe; and Jonides, John

    1984-01-01

    Studies the much-debated issue of the role of rote, repetitive rehearsal (maintenance rehearsal) on the establishment of memory traces that outlast the rehearsal process itself. Results show that there is an effect of maintenance rehearsal on long-term recognition performance and that this effect depends on the mental resources devoted to the…

  13. Automotive Engine Maintenance and Repair.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    This correspondence course, originally developed for the Marine Corps, is designed to provide students with an understanding of automotive engine maintenance and repair. The course contains six study units covering automotive engine maintenance and repair; design classification; engine malfunction, diagnosis, and repair; engine disassembly; engine…

  14. Space Telescope maintenance and refurbishment

    NASA Technical Reports Server (NTRS)

    Trucks, H. F.

    1983-01-01

    The Space Telescope (ST) represents a new concept regarding spaceborne astronomical observatories. Maintenance crews will be brought to the orbital worksite to make repairs and replace scientific instruments. For major overhauls the telescope can be temporarily returned to earth with the aid of the Shuttle. It will, thus, be possible to conduct astronomical studies with the ST for two decades or more. The five first-generation scientific instruments used with the ST include a wide field/planetary camera, a faint object camera, a faint object spectrograph, a high resolution spectrograph, and a high speed photometer. Attention is given to the optical telescope assembly, the support systems module, aspects of mission and science operations, unscheduled maintenance, contingency orbital maintenance, planned on-orbit maintenance, ground maintenance, ground refurbishment, and ground logistics.

  15. Robots for Aircraft Maintenance

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Marshall Space Flight Center charged USBI (now Pratt & Whitney) with the task of developing an advanced stripping system based on hydroblasting to strip paint and thermal protection material from Space Shuttle solid rocket boosters. A robot, mounted on a transportable platform, controls the waterjet angle, water pressure and flow rate. This technology, now known as ARMS, has found commercial applications in the removal of coatings from jet engine components. The system is significantly faster than manual procedures and uses only minimal labor. Because the amount of "substrate" lost is minimal, the life of the component is extended. The need for toxic chemicals is reduced, as is waste disposal and human protection equipment. Users of the ARMS work cell include Delta Air Lines and the Air Force, which later contracted with USBI for development of a Large Aircraft Paint Stripping system (LARPS). LARPS' advantages are similar to ARMS, and it has enormous potential in military and civil aircraft maintenance. The technology may also be adapted to aircraft painting, aircraft inspection techniques and paint stripping of large objects like ships and railcars.

  16. Symbolic Constraint Maintenance Grid

    NASA Technical Reports Server (NTRS)

    James, Mark

    2006-01-01

    Version 3.1 of Symbolic Constraint Maintenance Grid (SCMG) is a software system that provides a general conceptual framework for utilizing pre-existing programming techniques to perform symbolic transformations of data. SCMG also provides a language (and an associated communication method and protocol) for representing constraints on the original non-symbolic data. SCMG provides a facility for exchanging information between numeric and symbolic components without knowing the details of the components themselves. In essence, it integrates symbolic software tools (for diagnosis, prognosis, and planning) with non-artificial-intelligence software. SCMG executes a process of symbolic summarization and monitoring of continuous time series data that are being abstractly represented as symbolic templates of information exchange. This summarization process enables such symbolic- reasoning computing systems as artificial- intelligence planning systems to evaluate the significance and effects of channels of data more efficiently than would otherwise be possible. As a result of the increased efficiency in representation, reasoning software can monitor more channels and is thus able to perform monitoring and control functions more effectively.

  17. Cell Maintenance Systems

    NASA Technical Reports Server (NTRS)

    Morrison, D. R.

    1985-01-01

    Living human cells require attachment to a suitable surface and special culture conditions in order to grow. These requirements are modified and amplified when cells are taken into a weightless environment. Special handling and maintenance systems are required for routine laboratory procedures conducted in the Orbiter and in the Spacelab. Methods were developed to maintain cells in special incubators designed for the Orbiter middeck, however, electrophoresis and other experiments require cells to be harvested off of the culture substrate before they can be processed or used. The cell transport assembly (CTA) was flown on STS-8, and results show that improvements are required to maintain adequate numbers of cells in this device longer than 48 hours. The life sciences middeck centrifuge probably can be used, but modifications will be required to transfer cells from the CTA and keep the cells sterile. Automated systems such as the Skylab SO-15 flight hardware and crew operated systems are being evaluated for use on the Space Shuttle, Spacelab, and Space Station research modules.

  18. Health maintenance in women.

    PubMed

    Riley, Margaret; Dobson, Margaret; Jones, Elizabeth; Kirst, Nell

    2013-01-01

    The health maintenance examination is an opportunity to focus on disease prevention and health promotion. The patient history should include screening for tobacco use, alcohol misuse, intimate partner violence, and depression. Premenopausal women should receive preconception counseling and contraception as needed, and all women planning or capable of pregnancy should take 400 to 800 mcg of folic acid per day. High-risk sexually active women should be counseled on reducing the risk of sexually transmitted infections, and screened for chlamydia, gonorrhea, and syphilis. All women should be screened for human immunodeficiency virus. Adults should be screened for obesity and elevated blood pressure. Women 20 years and older should be screened for dyslipidemia if they are at increased risk of coronary heart disease. Those with sustained blood pressure greater than 135/80 mm Hg should be screened for type 2 diabetes mellitus. Women 55 to 79 years of age should take 75 mg of aspirin per day when the benefits of stroke reduction outweigh the increased risk of gastrointestinal hemorrhage. Women should begin cervical cancer screening by Papanicolaou test at 21 years of age, and if results have been normal, screening may be discontinued at 65 years of age or after total hysterectomy. Breast cancer screening with mammography may be considered in women 40 to 49 years of age based on patients' values, and potential benefits and harms. Mammography is recommended biennially in women 50 to 74 years of age. Women should be screened for colorectal cancer from 50 to 75 years of age. Osteoporosis screening is recommended in women 65 years and older, and in younger women with a similar risk of fracture. Adults should be immunized at recommended intervals according to guidelines from the Centers for Disease Control and Prevention. PMID:23317023

  19. Operational Interventions to Maintenance Error

    NASA Technical Reports Server (NTRS)

    Kanki, Barbara G.; Walter, Diane; Dulchinos, VIcki

    1997-01-01

    A significant proportion of aviation accidents and incidents are known to be tied to human error. However, research of flight operational errors has shown that so-called pilot error often involves a variety of human factors issues and not a simple lack of individual technical skills. In aircraft maintenance operations, there is similar concern that maintenance errors which may lead to incidents and accidents are related to a large variety of human factors issues. Although maintenance error data and research are limited, industry initiatives involving human factors training in maintenance have become increasingly accepted as one type of maintenance error intervention. Conscientious efforts have been made in re-inventing the team7 concept for maintenance operations and in tailoring programs to fit the needs of technical opeRAtions. Nevertheless, there remains a dual challenge: 1) to develop human factors interventions which are directly supported by reliable human error data, and 2) to integrate human factors concepts into the procedures and practices of everyday technical tasks. In this paper, we describe several varieties of human factors interventions and focus on two specific alternatives which target problems related to procedures and practices; namely, 1) structured on-the-job training and 2) procedure re-design. We hope to demonstrate that the key to leveraging the impact of these solutions comes from focused interventions; that is, interventions which are derived from a clear understanding of specific maintenance errors, their operational context and human factors components.

  20. [Maintenance therapy for colorectal cancer].

    PubMed

    Yamaguchi, Shigeo; Kato, Shunsuke

    2014-08-01

    Some trials have demonstrated the benefits of maintenance chemotherapy for advanced colorectal cancer. In chemotherapeutic strategies for advanced colorectal cancer, chemotherapy-related toxicity prevention and quality of life(QOL)maintenance are more important than the introduction of a strong regimen, especially when additional surgery is not possible. In Japan, the combination of a folinic acid/5-fluorouracil/oxaliplatin(FOLFOX)regimen and bevacizumab is a popular first-line chemotherapy regimen. However, despite its effectiveness, neuropathy or hand-foot syndrome after 5 or 6 cycles tends to lead to chemotherapy withdrawal. CAIRO3 trial reported the effectiveness of capecitabine and bevacizumab as a maintenance chemotherapy regimen. Additionally, the ML18147 trial demonstrated that bevacizumab beyond progression(BBP)prolonged overall survival(OS)and progression free survival(PFS)in patients with advanced colorectal cancer. Although those trials demonstrated the effectiveness of continuous or maintenance bevacizumab administration, no trials have compared the effectiveness of cytotoxic drugs with bevacizumab as maintenance therapies. Moreover, controversy exists regarding the selection of drugs as a maintenance therapy and the identification of patients who would benefit from maintenance therapy. PMID:25132024

  1. The economics of satellite maintenance

    NASA Technical Reports Server (NTRS)

    Derocher, W. L., Jr.; Sosnay, R. G.

    1975-01-01

    The primary goal of the space transportation system - to reduce the cost of space programs while satisfying their mission requirements - can be enhanced by the proper choice of a satellite-maintenance concept. This paper develops the life-cycle costs of performing an automated satellite program during the shuttle era in three competitive modes: expendable, ground-refurbishable, and in-orbit maintainable. In-orbit maintenance is shown to be the most economic maintenance mode for both low- and high-earth orbits.

  2. Maintenance Downtime March 13, 2015

    Atmospheric Science Data Center

    2015-03-11

    ... Impact:  Due to Earthdata User Registration System (URS) maintenance scheduled Friday 3/13, users may expect potential downtime or degraded service for all subsetters requiring URS login authentication during this time. ...

  3. Sirtuins, Tissue Maintenance, and Tumorigenesis

    PubMed Central

    Mohrin, Mary

    2013-01-01

    Aging is a degenerative process resulting in compromised tissue maintenance and increased susceptibility to diseases, such as cancer. Recent advancements support the notion that aging is a highly regulated process governed by evolutionarily conserved pathways. In mammals, tissue-specific adult stem cells (ASCs) persist throughout the lifetime to maintain and repair tissues. While reduced ASC self-renewal is thought to contribute to compromised tissue maintenance, increased self-renewal of cancer stem cells (CSCs) may lead to tumorigenesis. It is speculated that genetic regulators of aging, such as sirtuins, are likely to impinge upon the ASC compartments to regulate tissue maintenance and tumorigenesis. In this review, we discuss the emerging evidence linking sirtuins to normal and malignant ASC self-renewal, tissue maintenance, and tumorigenesis. PMID:24019997

  4. Avionics Maintenance Technology Program Standards.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the avionics maintenance technology program in Georgia. The standards are divided into the following categories: foundations, diploma/degree (philosophy, purpose, goals, program objectives, availability, evaluation); admissions, diploma/degree (admission requirements, provisional admission…

  5. Genetic variation and its maintenance

    SciTech Connect

    Roberts, D.F.; De Stefano, G.F.

    1986-01-01

    This book contains several papers divided among three sections. The section titles are: Genetic Diversity--Its Dimensions; Genetic Diversity--Its Origin and Maintenance; and Genetic Diversity--Applications and Problems of Complex Characters.

  6. Maintenance and Monitoring of BMPS

    EPA Science Inventory

    Two best management practice (BMP) sites in the Staten Island Bluebelt in Richmond Creek Watershed are Richmond Creek 5 (RC-5) and Richmond Creek 4 (RC-4). This presentation includes site description, briefing of initial monitoring activity, representative maintenance activity, ...

  7. Managing Custodial and Maintenance Staffs.

    ERIC Educational Resources Information Center

    Fickes, Michael

    2001-01-01

    Presents some basic maintenance management techniques that can help schools meet their budgets, preserve staffing levels, meet productivity needs, and sustain quality services. Tips for staff recruitment, training, and retention are explored. (GR)

  8. 33 CFR 127.401 - Maintenance: General.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) WATERFRONT FACILITIES WATERFRONT FACILITIES HANDLING LIQUEFIED NATURAL GAS AND LIQUEFIED HAZARDOUS GAS Waterfront Facilities Handling Liquefied Natural Gas Maintenance § 127.401 Maintenance: General. The...

  9. TPX remote maintenance and shielding

    SciTech Connect

    Rennich, M.J.; Nelson, B.E.

    1994-09-01

    The Tokamak Physics Experiment machine design incorporates comprehensive planning for efficient and safe component maintenance. Three programmatic decisions have been made to insure the successful implementation of this objective. First, the tokamak incorporates radiation shielding to reduce activation of components and limit the dose rate to personnel working on the outside of the machine. This allows most of the ex-vessel equipment to be maintained through conventional ``hands-on`` procedures. Second, to the maximum extent possible, low activation materials will be used inside the shielding volume. This resulted in the selection of Titanium (Ti-6Al-4V) for the vacuum vessel and PFC structures. The third decision stipulated that the primary in-vessel components will be replaced or repaired via remote maintenance tools specifically provided for the task. The component designers have been given the responsibility of incorporating maintenance design and for proving the maintainability of the design concepts in full-scale mockup tests prior to the initiation of final fabrication. Remote maintenance of the TPX machine is facilitated by general purpose tools provided by a special purpose design team. Major tools will include an in-vessel transporter, a vessel transfer system and a large component transfer container. In addition, tools such as manipulators and remotely operable impact wrenches will be made available to the component designers by this group. Maintenance systems will also provide the necessary controls for this equipment.

  10. 18 CFR 367.81 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Maintenance. 367.81... Expense Instructions § 367.81 Maintenance. (a) The cost of maintenance chargeable to the various operating... maintenance work. A list of work operations applicable generally to service company property is included...

  11. 49 CFR 193.2605 - Maintenance procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Maintenance procedures. 193.2605 Section 193.2605...: FEDERAL SAFETY STANDARDS Maintenance § 193.2605 Maintenance procedures. (a) Each operator shall determine... maintenance standards prescribed by this subpart. (b) Each operator shall follow one or more manuals...

  12. 14 CFR 91.405 - Maintenance required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Maintenance required. 91.405 Section 91.405... AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Maintenance, Preventive Maintenance, and Alterations § 91.405 Maintenance required. Each owner or operator of an aircraft— (a) Shall...

  13. NASA Critical Facilities Maintenance Assessment

    NASA Technical Reports Server (NTRS)

    Oberhettinger, David J.

    2006-01-01

    Critical Facilities Maintenance Assessment (CFMA) was first implemented by NASA following the March 2000 overtest of the High Energy Solar Spectroscopic Imager (HESSI) spacecraft. A sine burst dynamic test using a 40 year old shaker failed. Mechanical binding/slippage of the slip table imparted 10 times the planned force to the test article. There was major structural damage to HESSI. The mechanical "health" of the shaker had not been assessed and tracked to assure the test equipment was in good working order. Similar incidents have occurred at NASA facilities due to inadequate maintenance (e.g., rainwater from a leaky roof contaminated an assembly facility that housed a spacecraft). The HESSI incident alerted NASA to the urgent need to identify inadequacies in ground facility readiness and maintenance practices. The consequences of failures of ground facilities that service these NASA systems are severe due to the high unit value of NASA products.

  14. Iron production maintenance effectiveness system

    SciTech Connect

    Augstman, J.J.

    1996-12-31

    In 1989, an internal study in the Coke and Iron Maintenance Department identified the opportunities available to increase production, by decreasing unscheduled maintenance delays from 4.6%. A five year front loaded plan was developed, and presented to the company president. The plan required an initial investment of $1.4 million and a conservative break-even point was calculated to be 2.5 years. Due to budget restraints, it would have to be self-funded, i.e., generate additional production or savings, to pay for the program. The program began in 1991 at number 2 coke plant and the blast furnaces. This paper will describe the Iron Production Maintenance Effectiveness System (ME), which began with the mechanical and pipefitting trades.

  15. Active maintenance of semantic representations.

    PubMed

    Nishiyama, Ryoji

    2014-12-01

    In research on verbal working memory, articulatory rehearsal, a maintenance mechanism for phonological representations, has undergone intensive and excellent study. Possible mechanisms for semantic representation have received less attention. However, several studies have reported a double dissociation in types of memory deficits (semantic memory difficulties vs. phonological memory difficulties). This suggests the separability of two maintenance mechanisms. The present study focused on this separability in individuals with normal memory abilities, using a dual-task interference paradigm. The results indicate a crossover interaction between memory and interference task effects: Preventing articulatory rehearsal more strongly disrupted the phonological memory task, whereas performing a tapping task that interfered with attentional control more strongly disrupted semantic memory. These results suggest that semantic representations are actively maintained by a mechanism other than phonological maintenance. PMID:24687734

  16. Maintenance of photovoltaic power systems. Revision 1. Maintenance manual

    SciTech Connect

    Hall, M.R.

    1985-06-01

    This publication establishes standard practices for inspection, testing, and maintenance of photovoltaic power systems at Department of the Navy installations. The practices and procedures are recommended to ensure reliable operation of the power systems. The manual covers photovoltaic-array, battery, voltage-regulator, inverter, and wiring subsystems. In addition, this manual provides a troubleshooting guide and self-study questions and answers.

  17. 14 CFR 121.377 - Maintenance and preventive maintenance personnel duty time limitations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Maintenance and preventive maintenance personnel duty time limitations. 121.377 Section 121.377 Aeronautics and Space FEDERAL AVIATION..., Preventive Maintenance, and Alterations § 121.377 Maintenance and preventive maintenance personnel duty...

  18. 14 CFR 121.377 - Maintenance and preventive maintenance personnel duty time limitations.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Maintenance and preventive maintenance personnel duty time limitations. 121.377 Section 121.377 Aeronautics and Space FEDERAL AVIATION..., Preventive Maintenance, and Alterations § 121.377 Maintenance and preventive maintenance personnel duty...

  19. 14 CFR 91.1425 - CAMP: Maintenance, preventive maintenance, and alteration programs.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false CAMP: Maintenance, preventive maintenance... RULES Fractional Ownership Operations Program Management § 91.1425 CAMP: Maintenance, preventive... have an inspection program and a program covering other maintenance, preventive maintenance,...

  20. 14 CFR 121.377 - Maintenance and preventive maintenance personnel duty time limitations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Maintenance and preventive maintenance personnel duty time limitations. 121.377 Section 121.377 Aeronautics and Space FEDERAL AVIATION..., Preventive Maintenance, and Alterations § 121.377 Maintenance and preventive maintenance personnel duty...

  1. 14 CFR 121.377 - Maintenance and preventive maintenance personnel duty time limitations.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Maintenance and preventive maintenance personnel duty time limitations. 121.377 Section 121.377 Aeronautics and Space FEDERAL AVIATION..., Preventive Maintenance, and Alterations § 121.377 Maintenance and preventive maintenance personnel duty...

  2. 14 CFR 121.377 - Maintenance and preventive maintenance personnel duty time limitations.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Maintenance and preventive maintenance personnel duty time limitations. 121.377 Section 121.377 Aeronautics and Space FEDERAL AVIATION..., Preventive Maintenance, and Alterations § 121.377 Maintenance and preventive maintenance personnel duty...

  3. Laboratory Maintenance of Acinetobacter baumannii.

    PubMed

    Jacobs, Anna C; Zurawski, Daniel V

    2014-01-01

    Acinetobacter baumannii has recently drawn great interest in the microbiology research community due to the increase in clinical antibiotic resistance of this organism, and persistence of this bacterial species in the hospital environment. This unit outlines protocols for the growth and maintenance of A. baumannii in the laboratory. PMID:25367273

  4. Locker Room Maintenance Made Easy.

    ERIC Educational Resources Information Center

    Theel, James

    1998-01-01

    Provides examples on ways to make locker room maintenance easier and their use more student-friendly. Improvements include use of indoor-outdoor carpeting with numerous floor drains to cut mildew buildup, adequate ventilation to reduce musty smells, better hot water management, ceramic tiles to reduce water-damage repair and painting needs, and…

  5. Laboratory Maintenance of Rickettsia rickettsii

    PubMed Central

    Beier-Sexton, Magda; Azad, Abdu F.

    2009-01-01

    This unit includes protocols for the laboratory maintenance of the obligate intracellular bacterium Rickettsia rickettsii, including propagation in mammalian cell cultures, as well as isolation, counting, and storage procedures. Regulations for working with R. rickettsii in biosafety level 3 containment are also discussed. PMID:19016440

  6. New Directions in Maintenance Simulation.

    ERIC Educational Resources Information Center

    Miller, Gary G.

    A two-phase effort was conducted to design and evaluate a maintenance simulator which incorporated state-of-the-art information in simulation and instructional technology. The particular equipment selected to be simulated was the 6883 Convert/Flight Controls Test Station. Phase I included a generalized block diagram of the computer-trainer, the…

  7. Maintenance Sourcebook: A Caretaker's Manual.

    ERIC Educational Resources Information Center

    Yeatts, G. Dewey; Stoverink, Al; Conry, Terry; Goulet, Nicole; Wilson, Joe; Ryan, Rob

    2002-01-01

    Discusses five areas of custodial maintenance caretaking in which facility managers need continual education: first aid and safety, hazardous materials, products and supplies, chemicals and their intended use, and cleaning procedures. Includes an annotated list of resources related to these areas. (EV)

  8. Circassian Language Maintenance in Jordan

    ERIC Educational Resources Information Center

    Rannut, Ulle

    2009-01-01

    The central goal of this research is to explore the language policy aspects in Jordan by focusing on the Circassian language maintenance issues and to provide measures for language revitalisation in the current demographic, linguistic and political situation. Research is based on multiple sources of information, but primarily on the empirical data…

  9. Drive alignment pays maintenance dividends

    SciTech Connect

    Fedder, R.

    2008-12-15

    Proper alignment of the motor and gear drive on conveying and processing equipment will result in longer bearing and coupling life, along with lower maintenance costs. Selecting an alignment free drive package instead of a traditional foot mounted drive and motor is a major advancement toward these goals. 4 photos.

  10. Electrical Mechanical Maintenance. Instructor's Guide.

    ERIC Educational Resources Information Center

    Santa Clara County Superintendent of Schools, San Jose, CA.

    This instructor's guide describes the development of a sixteen-week postsecondary course in electrical mechanical maintenance. Following introductory sections that provide background information and a course summary, the third section describes the instructional model used in the course. Section 4 presents an overview of instructional media used…

  11. Maintenance of photovoltaic power systems

    NASA Astrophysics Data System (ADS)

    Hall, M. R.

    1984-08-01

    This publication establishes standard practices for inspection, testing, and maintenance of photovoltaic power systems at Dept. of the Navy installations. The practices and procedures are recommended to ensure reliable operation of the power systems. The manual covers photovoltaic-array, battery, voltage-regulator, inverter, and wiring subsystems. In addition, this manual provides a troubleshooting guide and self-study questions and answers.

  12. Maintenance of photovoltaic power systems

    SciTech Connect

    Hall, M.R.

    1984-08-01

    This publication establishes standard practices for inspection, testing, and maintenance of photovoltaic power systems at Department of the Navy installations. The practices and procedures are recommended to ensure reliable operation of the power systems. The manual covers photovoltaic-array, battery, voltage-regulator, inverter, and wiring subsystems. In addition, this manual provides a troubleshooting guide and self-study questions and answers.

  13. The Benefits of Health Maintenance.

    ERIC Educational Resources Information Center

    Rosenstein, Alan H.

    1987-01-01

    The article focuses on the merits of a comprehensive, medically-oriented health maintenance/risk assessment program, and suggests that such conditions as heart disease, cancer, and arteriosclerosis can be prevented or postponed through proper nutrition, weight control, exercise, smoking cessation, and stress management. (Author/CB)

  14. Afrikaans Language Maintenance in Australia

    ERIC Educational Resources Information Center

    Hatoss, Aniko; Starks, Donna; van Rensburg, Henriette Janse

    2011-01-01

    Changes in the political climate in the home country have resulted in the emigration of South Africans to English speaking countries such as Britain, Canada, Australia and New Zealand. Despite the scale of movement of the South African population, language maintenance in these diasporic contexts has received little consideration. This paper…

  15. Maintenance Sessions Prolong Cigarette Abstinence.

    ERIC Educational Resources Information Center

    Brandon, Thomas H.; And Others

    Recent smoking treatment programs have shifted emphasis from initial cessation rates to long-term abstinence, with aversion therapy and coping response training having had the most success. A smoking cessation treatment consisting of rapid smoking and behavioral counseling was supplemented with two maintenance treatments. After completing the…

  16. Avionics Maintenance Technology Program Guide.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Dept. of Vocational Education.

    This program guide presents the avionics maintenance technology curriculum for technical institutes in Georgia. The general information section contains the following for both the diploma program and the associate degree program: purpose and objectives; program description, including admissions, typical job titles, and accreditation and…

  17. Building Maintenance. Student Learning Guide.

    ERIC Educational Resources Information Center

    Palm Beach County Board of Public Instruction, West Palm Beach, FL.

    This student learning guide contains one module for completing a course in building maintenance. It is designed especially for use in secondary schools in Palm Beach County, Florida. The module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities keyed to resources, information sheets, student…

  18. Dynamic Evolution of Squeezing Maintenance

    NASA Astrophysics Data System (ADS)

    Wan, Zhi-Long; Fan, Hong-Yi

    2016-08-01

    By virtue of the coherent state representation and solving Riccati equation we derive dynamic evolution operator for maintaining squeezing, i.e., we demonstrate that the final state keeps squeezing when the initial state is a squeezed vacuum state. The number-phase squeezing maintenance mechanism is also studied.

  19. Checklist for School Maintenance Surveys.

    ERIC Educational Resources Information Center

    Maryland State Dept. of Education, Baltimore.

    This document is a simple 34-category checklist to be used by technicians conducting maintenance surveys. Categories includes: roadways & parking lots; site appearance; site utilities; exterior appearance; playground equipment; exterior structural conditions; gutters and downspouts; windows and caulking; sidewalks; entryways and exit doors; roof…

  20. Computer-Assisted School Maintenance

    ERIC Educational Resources Information Center

    Kennedy, Mike

    2012-01-01

    At thousands of schools and universities, years of economic troubles have led to repeated budget cuts. The reductions typically fall disproportionately on maintenance departments, where cuts are viewed as less critical than those that directly affect classroom instruction. And so nearly every facility manager at an education institution faces a…

  1. Potassium Balances in Maintenance Hemodialysis

    PubMed Central

    Choi, Hoon Young

    2013-01-01

    Potassium is abundant in the ICF compartment in the body and its excretion primarily depends on renal (about 90%), and to a lesser extent (about 10%) on colonic excretion. Total body potassium approximated to 50mmol/kg body weight and 2% of total body potassium is in the ECF compartment and 98% of it in the intracellular compartment.Dyskalemia is a frequent electrolyte imbalance observed among the maintenance hemodialysis patients. In case of hyperkalemia, it is frequently "a silent and a potential life threatening electrolyte imbalance" among patients with ESRD under maintenance hemodialysis. The prevalence of hyperkalemia in maintenance HD patients was reported to be about 8.7-10%. Mortality related to the hyperkalemia has been shown to be about 3.1/1,000 patient-years and about 24% of patients with HD required emergency hemodialysis due to severe hyperkalemia. In contrast to the hyperkalemia, much less attention has been paid to the hypokalemia in hemodialysis patients because of the low prevalence under maintenance hemodialysis patients. Severe hypokalemia in the hemodialysis patients usually was resulted from low potassium intake (malnutrition), chronic diarrhea, mineralocorticoid use, and imprudent use of K-exchange resins. Recently, the numbers of the new patients with advanced chronic kidney disease undergoing maintenance hemodialysis are tremendously increasing worldwide. However, the life expectancy of these patients is still much lower than that of the general population. The causes of excess mortality in these patients seem to various, but dyskalemia is a common cause among the patients with ESRD undergoing hemodialysis. PMID:23946760

  2. The Evidence Regarding Maintenance Tocolysis

    PubMed Central

    Elliott, John P.; Morrison, John C.

    2013-01-01

    Preterm delivery is a public health issue of major proportion. More than 12% of deliveries in the United States that occur at less than 37 weeks gestation preterm labor (PTL) represents the largest single reason for preterm birth (PTB). Attempts to prevent PTB have been unsuccessful. This paper of maintenance tocolytic therapy will examine the efficacy and safety of the drugs, both oral and subcutaneous, which have been utilized for prolongation of pregnancy following successful arrest of a documented episode of acute preterm labor. The evidence for oral tocolytics as maintenance therapy as well as parenteral medications for such patients is offered. Finally, the effects in the United States of the Food and Drug Administration (FDA) action on such medications are reported. PMID:23577034

  3. Mining Surveillance and Maintenance Dollars

    SciTech Connect

    MARTINEZ, R.

    2000-02-01

    Accelerating site cleanup to reduce facility risks to the workers, the public and the environment during a time of declining federal budgets represents a significant technical and economic challenge to U.S. Department of Energy (DOE) Operations Offices and their respective contractors. A significant portion of a facility's recurring annual expenses are associated with routine, long-term surveillance and maintenance (S&M) activities. However, ongoing S&M activities do nothing to reduce risks and basically spend money that could be reallocated towards facility deactivation. This paper discusses the background around DOE efforts to reduce surveillance and maintenance costs, one approach used to perform cost reviews, lessons learned from field implementation and what assistance is available to assist DOE sites in performing these evaluations.

  4. Orbital assembly and maintenance study

    NASA Technical Reports Server (NTRS)

    Gorman, D.; Grant, C.; Kyrias, G.; Lord, C.; Rombach, J.; Salis, M.; Skidmore, R.; Thomas, R.

    1975-01-01

    The requirements, conceptual design, tradeoffs, procedures, and techniques for orbital assembly of the support structure of the microwave power transmission system and the radio astronomy telescope are described. Thermal and stress analyses, packaging, alignment, and subsystems requirements are included along with manned vs. automated and transportation tradeoffs. Technical and operational concepts for the manned and automated maintenance of satellites were investigated and further developed results are presented.

  5. Designing a scrubber for maintenance

    SciTech Connect

    Mahlmeister, M.E.; Baron, E.S.; Watts, J.

    1996-12-01

    Under Round 4 of the U.S. Department of Energy`s (DOE) Clean Coal Technology program, New York State Electric & Gas Corporation (NYSEG), in partnership with Saarberg-Holter-Umwelttechnik (SHU), Consolidation Coal Company and Stebbins Engineering and Manufacturing Company, has retrofitted a formic acid enhanced forced oxidation wet limestone scrubber on Units I and 2 at the Milliken Steam Electric Station. Units I and 2 are 1950s vintage Combustion Engineering tangentially fired pulverized coal units, which are rated at nominal 150 MW each and operate in balanced draft mode. The Flue Gas Desulfurization (FGD) system for Unit 2 was placed into operation in January 1995 and the Unit I system in June 1995. The project incorporates several unique aspects: low pH operation; a ceramic tile-lined cocurrent/countercurrent, split module absorber; a wet stack supported on the roof of the FGD building; and closed loop, zero liquid discharge operation that produces commercial grade gypsum and calcium chloride brine. The project objectives include 98% SO{sub 2} removal efficiency while burning high sulfur coal, the production of marketable byproducts to minimize solid waste disposal, zero wastewater discharge, space-saving design, and minimization of maintenance requirements of a wet scrubber. The paper provides a brief overview of the project scrubber design relating to maintenance considerations. A discussion of the early results of the maintenance history is also provided. Repair techniques that have been developed and tested for ceramic tile lined modules are included. 1 fig.

  6. Demonstration of reliability centered maintenance

    SciTech Connect

    Schwan, C.A.; Morgan, T.A. )

    1991-04-01

    Reliability centered maintenance (RCM) is an approach to preventive maintenance planning and evaluation that has been used successfully by other industries, most notably the airlines and military. Now EPRI is demonstrating RCM in the commercial nuclear power industry. Just completed are large-scale, two-year demonstrations at Rochester Gas Electric (Ginna Nuclear Power Station) and Southern California Edison (San Onofre Nuclear Generating Station). Both demonstrations were begun in the spring of 1988. At each plant, RCM was performed on 12 to 21 major systems. Both demonstrations determined that RCM is an appropriate means to optimize a PM program and improve nuclear plant preventive maintenance on a large scale. Such favorable results had been suggested by three earlier EPRI pilot studies at Florida Power Light, Duke Power, and Southern California Edison. EPRI selected the Ginna and San Onofre sites because, together, they represent a broad range of utility and plant size, plant organization, plant age, and histories of availability and reliability. Significant steps in each demonstration included: selecting and prioritizing plant systems for RCM evaluation; performing the RCM evaluation steps on selected systems; evaluating the RCM recommendations by a multi-disciplinary task force; implementing the RCM recommendations; establishing a system to track and verify the RCM benefits; and establishing procedures to update the RCM bases and recommendations with time (a living program). 7 refs., 1 tab.

  7. 14 CFR 145.217 - Contract maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Contract maintenance. 145.217 Section 145...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.217 Contract maintenance. (a) A certificated repair station may contract a maintenance function pertaining to an article to...

  8. 33 CFR 127.401 - Maintenance: General.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Maintenance: General. 127.401 Section 127.401 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED... Waterfront Facilities Handling Liquefied Natural Gas Maintenance § 127.401 Maintenance: General. The...

  9. 49 CFR 192.749 - Vault maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Vault maintenance. 192.749 Section 192.749 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Maintenance § 192.749 Vault maintenance. (a) Each...

  10. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Valve maintenance. 195.420 Section 195.420 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each...

  11. 30 CFR 57.5066 - Maintenance standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maintenance standards. 57.5066 Section 57.5066... Maintenance standards. (a) Any diesel powered equipment operated at any time in underground areas must meet the following maintenance standards: (1) The operator must maintain any approved engine in...

  12. 23 CFR 1.27 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Maintenance. 1.27 Section 1.27 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL MANAGEMENT AND ADMINISTRATION GENERAL § 1.27 Maintenance... maintenance of projects shall be carried out in accordance with policies and procedures issued by...

  13. 49 CFR 37.203 - Lift maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Lift maintenance. 37.203 Section 37.203... DISABILITIES (ADA) Over-the-Road Buses (OTRBs) § 37.203 Lift maintenance. (a) The entity shall establish a system of regular and frequent maintenance checks of lifts sufficient to determine if they are...

  14. 47 CFR 87.69 - Maintenance tests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Maintenance tests. 87.69 Section 87.69... Operating Requirements and Procedures Operating Requirements § 87.69 Maintenance tests. The licensee may make routine maintenance tests on equipment other than emergency locator transmitters if there is...

  15. 47 CFR 80.96 - Maintenance tests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Maintenance tests. 80.96 Section 80.96... MARITIME SERVICES Operating Requirements and Procedures Operating Procedures-General § 80.96 Maintenance tests. Stations are authorized to engage in test transmissions necessary for maintenance of the...

  16. 49 CFR 260.39 - Maintenance standards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Maintenance standards. 260.39 Section 260.39... REHABILITATION AND IMPROVEMENT FINANCING PROGRAM Standards for Maintenance of Facilities Involved in the Project § 260.39 Maintenance standards. (a) When the proceeds of a direct loan or an obligation guaranteed...

  17. 40 CFR 86.001-25 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Maintenance. 86.001-25 Section 86.001...-Fueled and Methanol-Fueled Heavy-Duty Vehicles § 86.001-25 Maintenance. Section 86.001-25 includes text... engines. (2) Maintenance performed on vehicles, engines, subsystems, or components used to...

  18. 41 CFR 101-39.303 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Maintenance. 101-39.303... Maintenance. In order to ensure uninterrupted operation of GSA Interagency Fleet Management System (IFMS) vehicles, safety and preventive maintenance inspections will be performed at regularly scheduled...

  19. 5 CFR 850.302 - Record maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Record maintenance. 850.302 Section 850... (CONTINUED) RETIREMENT SYSTEMS MODERNIZATION Records § 850.302 Record maintenance. (a) The retirement and..., for the initiation and maintenance of records, evidence, or other information described in this...

  20. 40 CFR 63.1655 - Maintenance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Maintenance requirements. 63.1655....1655 Maintenance requirements. (a) The owner or operator of an affected source must comply with the... maintenance plan for each air pollution control device associated with submerged arc furnaces, metal...

  1. 14 CFR 145.217 - Contract maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Contract maintenance. 145.217 Section 145...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.217 Contract maintenance. (a) A certificated repair station may contract a maintenance function pertaining to an article to...

  2. 40 CFR 610.52 - Maintenance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Maintenance. 610.52 Section 610.52 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY RETROFIT DEVICES Test Procedures and Evaluation Criteria Durability Test Procedures § 610.52 Maintenance. (a) Maintenance during the durability...

  3. 49 CFR 260.39 - Maintenance standards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Maintenance standards. 260.39 Section 260.39... REHABILITATION AND IMPROVEMENT FINANCING PROGRAM Standards for Maintenance of Facilities Involved in the Project § 260.39 Maintenance standards. (a) When the proceeds of a direct loan or an obligation guaranteed...

  4. 49 CFR 260.39 - Maintenance standards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Maintenance standards. 260.39 Section 260.39... REHABILITATION AND IMPROVEMENT FINANCING PROGRAM Standards for Maintenance of Facilities Involved in the Project § 260.39 Maintenance standards. (a) When the proceeds of a direct loan or an obligation guaranteed...

  5. 47 CFR 87.69 - Maintenance tests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 5 2012-10-01 2012-10-01 false Maintenance tests. 87.69 Section 87.69... Operating Requirements and Procedures Operating Requirements § 87.69 Maintenance tests. The licensee may make routine maintenance tests on equipment other than emergency locator transmitters if there is...

  6. Laboratory services series: a programmed maintenance system

    SciTech Connect

    Tuxbury, D.C.; Srite, B.E.

    1980-01-01

    The diverse facilities, operations and equipment at a major national research and development laboratory require a systematic, analytical approach to operating equipment maintenance. A computer-scheduled preventive maintenance program is described including program development, equipment identification, maintenance and inspection instructions, scheduling, personnel, and equipment history.

  7. Computerizing Maintenance Management Improves School Processes.

    ERIC Educational Resources Information Center

    Conroy, Pat

    2002-01-01

    Describes how a Computerized Maintenance Management System (CMMS), a centralized maintenance operations database that facilitates work order procedures and staff directives, can help individual school campuses and school districts to manage maintenance. Presents the benefits of CMMS and things to consider in CMMS selection. (EV)

  8. 23 CFR 633.208 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Maintenance. 633.208 Section 633.208 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS REQUIRED CONTRACT PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.208 Maintenance. Maintenance of all...

  9. 23 CFR 633.208 - Maintenance.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Maintenance. 633.208 Section 633.208 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS REQUIRED CONTRACT PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.208 Maintenance. Maintenance of all...

  10. 23 CFR 633.208 - Maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Maintenance. 633.208 Section 633.208 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS REQUIRED CONTRACT PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.208 Maintenance. Maintenance of all...

  11. 23 CFR 633.208 - Maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Maintenance. 633.208 Section 633.208 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS REQUIRED CONTRACT PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.208 Maintenance. Maintenance of all...

  12. 23 CFR 633.208 - Maintenance.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false Maintenance. 633.208 Section 633.208 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS REQUIRED CONTRACT PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.208 Maintenance. Maintenance of all...

  13. 40 CFR 610.52 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY RETROFIT... scheduled vehicle maintenance is the periodic service specified in the original owner's manual supplied to... maintenance, the Administrator may decide that before and after maintenance fuel economy tests are...

  14. Maintenance Staffing Guidelines For Educational Facilities.

    ERIC Educational Resources Information Center

    APPA: Association of Higher Education Facilities Officers, Alexandria, VA.

    The purpose of this publication is to provide a resource or guide for educational facilities in establishing or developing a maintenance trades organization that is sufficient to accomplish basic facilities maintenance functions. The guidelines are intended to suggest staffing levels for those routine facilities maintenance activities that are…

  15. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Valve maintenance. 195.420 Section 195.420... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each valve..., inspect each mainline valve to determine that it is functioning properly. (c) Each operator shall...

  16. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Valve maintenance. 195.420 Section 195.420... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each valve..., inspect each mainline valve to determine that it is functioning properly. (c) Each operator shall...

  17. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Valve maintenance. 195.420 Section 195.420... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each valve..., inspect each mainline valve to determine that it is functioning properly. (c) Each operator shall...

  18. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Valve maintenance. 195.420 Section 195.420... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each valve..., inspect each mainline valve to determine that it is functioning properly. (c) Each operator shall...

  19. 14 CFR 145.205 - Maintenance, preventive maintenance, and alterations performed for certificate holders under...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... sections of its maintenance manual. (b) A certificated repair station that performs inspections for a...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.205 Maintenance, preventive.... (a) A certificated repair station that performs maintenance, preventive maintenance, or...

  20. 14 CFR 145.205 - Maintenance, preventive maintenance, and alterations performed for certificate holders under...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... sections of its maintenance manual. (b) A certificated repair station that performs inspections for a...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.205 Maintenance, preventive.... (a) A certificated repair station that performs maintenance, preventive maintenance, or...

  1. 14 CFR 121.379 - Authority to perform and approve maintenance, preventive maintenance, and alterations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... its continuous airworthiness maintenance program and its maintenance manual. In addition, a... airworthiness maintenance program and maintenance manual of the other certificate holder. (b) A certificate... section. However, in the case of a major repair or major alteration, the work must have been done...

  2. 14 CFR 121.379 - Authority to perform and approve maintenance, preventive maintenance, and alterations.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... its continuous airworthiness maintenance program and its maintenance manual. In addition, a... airworthiness maintenance program and maintenance manual of the other certificate holder. (b) A certificate... section. However, in the case of a major repair or major alteration, the work must have been done...

  3. 14 CFR 145.205 - Maintenance, preventive maintenance, and alterations performed for certificate holders under...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... sections of its maintenance manual. (b) A certificated repair station that performs inspections for a...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.205 Maintenance, preventive.... (a) A certificated repair station that performs maintenance, preventive maintenance, or...

  4. 14 CFR 145.205 - Maintenance, preventive maintenance, and alterations performed for certificate holders under...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... sections of its maintenance manual. (b) A certificated repair station that performs inspections for a...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.205 Maintenance, preventive.... (a) A certificated repair station that performs maintenance, preventive maintenance, or...

  5. 14 CFR 145.205 - Maintenance, preventive maintenance, and alterations performed for certificate holders under...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... sections of its maintenance manual. (b) A certificated repair station that performs inspections for a...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.205 Maintenance, preventive.... (a) A certificated repair station that performs maintenance, preventive maintenance, or...

  6. Themes from a Camp Maintenance Network: Camp Maintenance and Property Personnel Share Their Insights and Challenges.

    ERIC Educational Resources Information Center

    Whyman, Wynne

    2003-01-01

    A camp maintenance survey was completed by maintenance personnel from 99 camps. Results highlighted several important considerations: ensuring sufficient maintenance funds for aging infrastructure, including camp/property personnel in decision making, publicizing completed maintenance projects, examining long-term needs of the land, and adopting…

  7. 14 CFR 91.1433 - CAMP: Maintenance and preventive maintenance training program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false CAMP: Maintenance and preventive... RULES Fractional Ownership Operations Program Management § 91.1433 CAMP: Maintenance and preventive... performing maintenance or preventive maintenance functions for it must have a training program to ensure...

  8. 14 CFR 43.3 - Persons authorized to perform maintenance, preventive maintenance, rebuilding, and alterations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Persons authorized to perform maintenance, preventive maintenance, rebuilding, and alterations. 43.3 Section 43.3 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT MAINTENANCE, PREVENTIVE MAINTENANCE, REBUILDING, AND ALTERATION § 43.3...

  9. Optimization of nuclear plant preventive maintenance

    SciTech Connect

    McClymonds, S.L.; Winge, D.E.

    1987-01-01

    It is generally accepted that preventive maintenance can achieve greater equipment reliability. Most would also agree that the taking of precautions and checking reduces the need to perform corrective maintenance. In the nuclear industry, however, preventive maintenance has not been completely successful in sustaining equipment reliability levels. This paper presents methods for developing an optimum preventive maintenance program for nuclear power plants, one which will contribute to high plant availability by concentrating resources on those maintenance tasks that are directly applicable to equipment reliability.

  10. Pacific Northwest Laboratory Maintenance Implementation plan

    SciTech Connect

    Bright, J.D.

    1992-06-01

    This Maintenance Implementation plan has been developed for Pacific Northwest Laboratory`s (PNL) Nuclear Facilities: 306W, 324, 325, 327 and 329NMF. It is based on a graded approach, self-assessment of the existing maintenance program(s) per the requirements specified by US Department of Energy (DOE) Order 4330.4A, Chapter II, Change {number_sign}3. The results of this assessment were evaluated to determine needed improvements in PNL Craft Services` current maintenance program. The objective of this implementation plan is to provide baseline information for compliance to the DOE 4330.4A, and for needed improvements. The prime consideration in applying a graded approach to the Order has been to maintain safe and reliable operations, environmental compliance, safeguards and security, programmatic mission, facility preservation, and/or other facility-specific requirements. Using the results of the self-assessment, PNL has selected nine of the 18 elements of the Maintenance Program defined by DOE Order 4330.4A for improvement. The elements selected for improvement are Training and Qualification of Maintenance Personnel; Maintenance Procedures; Planning, Scheduling, and Coordination of Maintenance; Control of Maintenance Activities; Post-Maintenance Testing; Facility Condition Inspection; Management Involvement; Maintenance History; and Additional Maintenance Requirements. Based upon graded approach and current funding, those elements considered most important have been selected as goals for earliest compliance. Commitment dates for these elements have been established for compliance. The remaining elements of noncompliance will be targeted for implementation during later budget periods.

  11. Pacific Northwest Laboratory Maintenance Implementation plan

    SciTech Connect

    Bright, J.D.

    1992-06-01

    This Maintenance Implementation plan has been developed for Pacific Northwest Laboratory's (PNL) Nuclear Facilities: 306W, 324, 325, 327 and 329NMF. It is based on a graded approach, self-assessment of the existing maintenance program(s) per the requirements specified by US Department of Energy (DOE) Order 4330.4A, Chapter II, Change {number sign}3. The results of this assessment were evaluated to determine needed improvements in PNL Craft Services' current maintenance program. The objective of this implementation plan is to provide baseline information for compliance to the DOE 4330.4A, and for needed improvements. The prime consideration in applying a graded approach to the Order has been to maintain safe and reliable operations, environmental compliance, safeguards and security, programmatic mission, facility preservation, and/or other facility-specific requirements. Using the results of the self-assessment, PNL has selected nine of the 18 elements of the Maintenance Program defined by DOE Order 4330.4A for improvement. The elements selected for improvement are Training and Qualification of Maintenance Personnel; Maintenance Procedures; Planning, Scheduling, and Coordination of Maintenance; Control of Maintenance Activities; Post-Maintenance Testing; Facility Condition Inspection; Management Involvement; Maintenance History; and Additional Maintenance Requirements. Based upon graded approach and current funding, those elements considered most important have been selected as goals for earliest compliance. Commitment dates for these elements have been established for compliance. The remaining elements of noncompliance will be targeted for implementation during later budget periods.

  12. [Maintenance care for dental implant].

    PubMed

    Kamoi, K

    1989-10-01

    Dental implant has tried at the early stage in 19th century recovering an oral function and esthetics. Technological revolutions in biochemical and new materials have developed on the remarkable change in the dental implants, nowadays we call the three generation therapy for dental implantology. There are many kinds of methods and techniques in dental implants, however a lot of troublesome complication on the process of surgical phase, construction of prothodontics and prognosis of maintenance care. In the proceedings of this symposium, I would like to propose you how to manage the maintenance care for various kind of dental implants through the methodology and case presentations. Tendenay and future for dental implants The current outlook of dental implant has increasing supply and demand not only dentists but also patients. According to Japanese Welfare Ministry's report in 1987, average missing teeth over sixty years old generations are approximately 42% in accordance with NIDR (U.S.A.) research. They are missed on ten over teeth in full 28th teeth dentitions owing to dental caries and periodontal diseases. Generally speaking, latent implant patients are occupied on the same possibility of needs for dental implants both Japan and U.S.A. Management of maintenance care The patients hardly recognized the importance of plaque control for the maintenance care in the intraoral condition after implantation. Dentists and dental staffs must be instruct patients for importance of plaque removal and control, because they already had forgotten the habit of teeth cleaning, especially in the edenturous conditions. 1) Concept of establishment in oral hygiene. Motivation and instruction for patients include very important factors in dental implants as well as in periodontal diseases. Patients who could not achieve on good oral hygiene levels obtained no good results in the long term observations. To establish good oral hygiene are how to control supra plaque surrounding tissues

  13. No maintenance -- no energy efficiency

    SciTech Connect

    Szydlowski, R.F.; Schliesing, J.S.; Winiarski, D.W.

    1994-12-01

    Field investigations illustrate that it is not realistic to expect new high-tech equipment to function for a full life expectancy at high efficiency without significant operations and maintenance (O&M). A simple walk through inspection of most buildings reveals extensive equipment that is being operated on manual override, is incorrectly adjusted and operating inefficiently, or is simply inoperative. This point is illustrated with two examples at Robins Air Force Base, Georgia. The first describes development of a comprehensive, base-wide, steam trap maintenance program. The second describes a measured evaluation from a typical office building. The objective of both examples was to assess the importance of proper O&M. The proposed ``O&M First`` philosophy will result in more efficient building HVAC operation, provide improved services to the building occupants, and reduce energy consumption and unscheduled equipment repair/replacement. Implementation of a comprehensive O&M program will result in a 15--25% energy savings. The O&M foundation that is established will allow other energy conservation activities such is demand side management or energy management and control systems, to achieve and maintain their expected energy savings.

  14. Maintenance dialysis in developing countries.

    PubMed

    Sinha, Aditi; Bagga, Arvind

    2015-02-01

    Patients with end-stage renal disease require renal replacement therapy with maintenance hemodialysis or chronic peritoneal dialysis while awaiting transplantation. In addition to economic issues and limited state funding for advanced health care, the lack of trained medical personnel contributes to scarce dialysis facilities for children in developing countries. The establishment and operation of a hemodialysis unit with multidisciplinary facilities is both cost- and labor-intensive. Hemodialysis is usually carried out three times a week in a hospital setting and affects the curricular and extracurricular activities of the patient. Chronic ambulatory or cyclic peritoneal dialysis is technically simpler and allows better nutrition and growth, but is expensive for the majority of patients who must pay out of their own pocket. Multiple initiatives to enhance the training of pediatricians and nurses in skills related to initiating and managing patients on maintenance dialysis have resulted in the improved survival of children with end-stage renal disease. Support from state governments and philanthropic institutions have helped in establishing pediatric nephrology units that are equipped to provide renal replacement therapy for children. PMID:24469439

  15. Implant Maintenance: A Clinical Update

    PubMed Central

    Gulati, Minkle; Govila, Vivek; Anand, Vishal; Anand, Bhargavi

    2014-01-01

    Introduction. The differences in the supporting structure of the implant make them more susceptible to inflammation and bone loss when plaque accumulates as compared to the teeth. Therefore, a comprehensive maintenance protocol should be followed to ensure the longevity of the implant. Material and Method. A research to provide scientific evidence supporting the feasibility of various implant care methods was carried out using various online resources to retrieve relevant studies published since 1985. Results. The electronic search yielded 708 titles, out of which a total of 42 articles were considered appropriate and finally included for the preparation of this review article. Discussion. A typical maintenance visit for patients with dental implants should last 1 hour and should be scheduled every 3 months to evaluate any changes in their oral and general history. It is essential to have a proper instrument selection to prevent damage to the implant surface and trauma to the peri-implant tissues. Conclusion. As the number of patients opting for dental implants is increasing, it becomes increasingly essential to know the differences between natural teeth and implant care and accept the challenges of maintaining these restorations. PMID:27437506

  16. Infrared Scanning For Electrical Maintenance

    NASA Astrophysics Data System (ADS)

    Eisenbath, Steven E.

    1983-03-01

    Given the technological age that we have now entered, the purpose of this paper is to relate how infrared scanning can be used for an electrical preventative maintenance program. An infrared scanner is able to produce an image because objects give off infrared radiation in relationship to their temperature. Most electrical problems will show up as an increase in temperature, thereby making the infrared scanner a useful preventative maintenance tool. Because of the sensitivity of most of the scanners, .1 to .2 of a degree, virtually all electrical problems can be pinpointed long before they become a costly failure. One of the early uses of infrared scanning was to check the power company's electrical distribution system. Most of this was performed via aircraft or truck mounted scanning devices which necessitated its semi-permanent mounting. With the advent of small hand held infrared imagers, along with more portability of the larger systems, infrared scanning has gained more popularity in checking electrical distribution systems. But the distribution systems are now a scaled down model, mainly the in-plant electrical systems. By in-plant, I mean any distribution of electricity; once it leaves the power company's grid. This can be in a hospital, retail outlet, warehouse or manufacturing facility.

  17. Maintenance of Certification®, Maintenance of Public Trust

    PubMed Central

    Chung, Kevin C.; Clapham, Philip J.; Lalonde, Donald H.

    2010-01-01

    The Maintenance of Certification® (MOC) program has been well received by many physicians, but faced significant opposition from others, who complain that it is overly tedious, costly, and irrelevant to their practice. This article offers a consolidated and concise history of the MOC program and a summary of what plastic surgeons need to know to successfully complete the American Board of Plastic Surgery’s (ABPS) own MOC requirements. The authors have justified each step of the ABPS’s MOC process in terms of how it improves the quality of care delivered to Plastic Surgery patients. Finally, a summary of research is presented that demonstrates both that the public supports the MOC process for all physicians and that continuing education and formal assessment and improvement initiatives have been linked in multiple studies to a better and more evidence-based medical practice. PMID:21285803

  18. [Hospital integrated maintenance management system design and application].

    PubMed

    Zeng, Li

    2011-03-01

    According to hospital medical equipment, information equipment and water, electricity and other equipment maintenance procedures, this paper planned and developed a comprehensive maintenance management system for hospitals. The system implements equipment maintenance, maintenance applications, maintenance registration, preventive maintenance, data quantitative analysis and other functions. PMID:21706796

  19. Second Line of Defense: Electronic Maintenance Reports, Local Maintenance Provider User Guide, Rev. 3

    SciTech Connect

    Leigh, Richard J.

    2012-09-01

    The Electronic Maintenance Report forms allow Local Maintenance Providers (LMP) and other program staff to enter maintenance information into a simple and secure system. This document describes the features and information required to complete the Maintenance Report forms. It is expected that all Corrective Maintenance Reports from LMPs will be submitted electronically into the SLD Portal. As an exception (e.g., when access to the SLD Portal is unavailable), Maintenance Reports can be submitted via a secure Adobe PDF form available through the Sustainability Manager assigned to each country.

  20. Reliability centered maintenance in astronomical infrastructure facilities

    NASA Astrophysics Data System (ADS)

    Ansorge, W. R.

    2006-06-01

    Hundreds of mirror segment, thousands of high precision actuators, highly complex mechanical, hydraulic, electrical and other technology subsystems, and highly sophisticated control systems: an ELT system consists of millions of individual parts and components, each of them may fail and lead to a partial or complete system breakdown. The traditional maintenance concepts characterized by predefined preventive maintenance activities and rigid schedules are not suitable for handling this large number of potential failures and malfunctions and the extreme maintenance workload. New maintenance strategies have to be found suitable to increase reliability while reducing the cost of needless maintenance services. The Reliability Centred Maintenance (RCM) methodology is already used extensively by airlines, and in industrial and marine facilities and even by scientific institutions like NASA. Its application increases the operational reliability while reducing the cost of unnecessary maintenance activities and is certainly also a solution for current and future ELT facilities. RCM is a concept of developing a maintenance scheme based on the reliability of the various components of a system by using "feedback loops between instrument / system performance monitoring and preventive/corrective maintenance cycles." Ideally RCM has to be designed within a system and should be located in the requirement definition, the preliminary and final design phases of new equipment and complicated systems. However, under certain conditions, an implementation of RCM into the maintenance management strategy of already existing astronomical infrastructure facilities is also possible. This presentation outlines the principles of the RCM methodology, explains the advantages, and highlights necessary changes in the observatory development, operation and maintenance philosophies. Presently, it is the right time to implement RCM into current and future ELT projects and to save up to 50% maintenance

  1. Estimating Maintenance Demands Of A Space Station

    NASA Technical Reports Server (NTRS)

    Bream, B. L.

    1995-01-01

    RENEW computer program simulates maintenance events and estimates data pertinent to maintenance demands. Developed in support of Space Station Freedom Program (SSFP) Work Package 4. Uses data on reliability and maintainability (R&M) as well as logistical data to estimate both average and time-dependent maintenance demands. Estimates failure and repair times by use of Monte Carlo simulations. Written in BASIC and Assembly language.

  2. PFP MICON maintenance manual. Revision 1

    SciTech Connect

    Silvan, G.R.

    1995-01-25

    This manual covers the use of maintenance displays, maintenance procedures, system alarms and common system failures. This manual is intended to supplement the MICON maintenance training not replace it. It also assumes that the user is familiar with the normal operation of the MICON A/S system. The MICON system is a distributed control computer and, among other things, controls the HVAC system for the Plutonium Finishing Plant.

  3. Simulated maintenance a virtual reality

    SciTech Connect

    Lirvall, P.

    1995-10-01

    The article describes potential applications of personal computer-based virtual reality software. The applications are being investigated by Atomic Energy of Canada Limited`s (AECL) Chalk River Laboratories for the Canadian deuterium-uranium (Candu) reactor. Objectives include: (1) reduction of outage duration and improved safety, (2) cost-effective and safe maintenance of equipment, (3) reduction of exposure times and identification of overexposure situations, (4) cost-effective training in a virtual control room simulator, (5) human factors evaluation of design interface, and (6) visualization of conceptual and detailed designs of critical nuclear field environments. A demonstration model of a typical reactor control room, the use of virtual reality in outage planning, and safety issues are outlined.

  4. Improvement of aircraft maintenance methods

    NASA Astrophysics Data System (ADS)

    Vladimirov, N. I.

    The papers presented in this volume provide an overview of recent theoretical and experimental research aimed at improving the maintenance of aircraft, developing advanced diagnostic techniques, and increasing the efficiency and safety of flight operations. Topics discussed include design characteristics of the functional systems of aircraft and prediction of their technical condition, a probability analysis of a method for diagnosing gas turbine engines on the basis of thermogasdynamic parameters, characteristics of fatigue crack growth under the service-spectrum loading of the tail boom, and the accuracy of nonparametric reliability estimates under varying operation conditions. Papers are also presented on ways of reducing the aeration of hydraulic fluids in aircraft, evaluation of the efficiency of the pilot's control activity in a flight simulator, and using control charts for the analysis of the performance of aviation specialists. (For individual items see A93-18327 to A93-18351)

  5. Autonomous spacecraft maintenance study group

    NASA Technical Reports Server (NTRS)

    Marshall, M. H.; Low, G. D.

    1981-01-01

    A plan to incorporate autonomous spacecraft maintenance (ASM) capabilities into Air Force spacecraft by 1989 is outlined. It includes the successful operation of the spacecraft without ground operator intervention for extended periods of time. Mechanisms, along with a fault tolerant data processing system (including a nonvolatile backup memory) and an autonomous navigation capability, are needed to replace the routine servicing that is presently performed by the ground system. The state of the art fault handling capabilities of various spacecraft and computers are described, and a set conceptual design requirements needed to achieve ASM is established. Implementations for near term technology development needed for an ASM proof of concept demonstration by 1985, and a research agenda addressing long range academic research for an advanced ASM system for 1990s are established.

  6. 40 CFR 610.52 - Maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) PCV Inspection. (iv) Dwell and timing check. (v) Charging circuit check. (3) Periodic maintenance... retrofit). (iii) Windshield wipers. (iv) Fluid levels unrelated to retrofit. (v) Brakes. (vi)...

  7. 40 CFR 610.52 - Maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) PCV Inspection. (iv) Dwell and timing check. (v) Charging circuit check. (3) Periodic maintenance... retrofit). (iii) Windshield wipers. (iv) Fluid levels unrelated to retrofit. (v) Brakes. (vi)...

  8. 40 CFR 610.52 - Maintenance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) PCV Inspection. (iv) Dwell and timing check. (v) Charging circuit check. (3) Periodic maintenance... retrofit). (iii) Windshield wipers. (iv) Fluid levels unrelated to retrofit. (v) Brakes. (vi)...

  9. Maintenance management at La Silla Paranal Observatory

    NASA Astrophysics Data System (ADS)

    Montano, Nelson

    2008-07-01

    From the beginning of the VLT project, the European Southern Observatory (ESO) considered the application of a competent maintenance strategy a fundamental aspect for future operations of the Paranal Observatory. For that purpose, a special maintenance philosophy was developed during the project stage and applied during the initial years of operations. The merging of the La Silla and Paranal Observatories in 2005 added a new managerial challenge to the regular operational requirements (high availability and reliability) which motivated ESO Management to develop a stronger strategy for the operations of the new merged Observatory. Part of the new strategy considered the creation of a dedicated department for the management of all maintenance activities, separating this support from the traditional scheme where the Engineering Department had the responsibility for the entire technical support to operations. In order to keep a competent level of maintenance operations for the new unified Observatory, the La Silla Paranal (LSP) Maintenance Department has been using a well known maintenance management model used in various industrial applications as a guide. Today the operations of the Maintenance Department are concentrated on developing and implementing practices regarding concepts such as Maintenance Tactics, Planning, Data Management, Performance Indicators and Material Management. In addition to that, advances related to Reliability Analysis been taken in order to reach a superior level of excellence. The results achieved by the LSP Maintenance Department are reflected in a reduced rate of functional failures, allowing uninterrupted operations of the Observation sites.

  10. [Development of Hospital Equipment Maintenance Information System].

    PubMed

    Zhou, Zhixin

    2015-11-01

    Hospital equipment maintenance information system plays an important role in improving medical treatment quality and efficiency. By requirement analysis of hospital equipment maintenance, the system function diagram is drawed. According to analysis of input and output data, tables and reports in connection with equipment maintenance process, relationships between entity and attribute is found out, and E-R diagram is drawed and relational database table is established. Software development should meet actual process requirement of maintenance and have a friendly user interface and flexible operation. The software can analyze failure cause by statistical analysis. PMID:27066680

  11. Managing Highway Maintenance: Management Data and Maintenance Standards; Levels 1 & 2, For Training in Maintenance Standards and Crew Scheduling.

    ERIC Educational Resources Information Center

    Federal Highway Administration (DOT), Washington, DC. Offices of Research and Development.

    Part of the series "Managing Highway Maintenance," the unit is designed for use with unit eight, level one, and unit 13, level two, and the certification tests for those units in the series. It contains typical management data and selected highway maintenance standards for the areas of: surface and shoulder; roadside and drainage; traffic…

  12. 75 FR 4099 - Maintenance Wage Rate Wage Recommendation and Maintenance Wage Survey; Report of Additional...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-26

    ... adopt prevailing wage rates for maintenance laborers and mechanics, and to approve or refer to the U.S... maintenance laborers and mechanics, and to approve or refer to the U.S. Department of Labor for approval,...

  13. 14 CFR 135.437 - Authority to perform and approve maintenance, preventive maintenance, and alterations.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., preventive maintenance, and alterations as provided in its maintenance manual. In addition, a certificate holder may perform these functions for another certificate holder as provided in the maintenance manual... alterations that are performed under paragraph (a) of this section. However, in the case of a major repair...

  14. 14 CFR 135.437 - Authority to perform and approve maintenance, preventive maintenance, and alterations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., preventive maintenance, and alterations as provided in its maintenance manual. In addition, a certificate holder may perform these functions for another certificate holder as provided in the maintenance manual... alterations that are performed under paragraph (a) of this section. However, in the case of a major repair...

  15. Grounds Maintenance Equipment and Procedures. Building Maintenance. Module VI. Instructor's Guide.

    ERIC Educational Resources Information Center

    Crank, Virgil

    This curriculum guide, one of six modules keyed to the building maintenance competency profile developed by industry and education professionals, provides materials for two units on grounds maintenance equipment and procedures. The first unit deals with grounds maintenance equipment and includes the following lessons: safety; changing oil/filter…

  16. Relationship Maintenance on Facebook: Development of a Measure, Relationship to General Maintenance, and Relationship Satisfaction

    ERIC Educational Resources Information Center

    Dainton, Marianne

    2013-01-01

    Previous research indicates that the primary reason college students use Facebook is for relationship maintenance. The present study sought to determine the relationship between Facebook maintenance and general maintenance efforts in college student romantic relationships, as well as the impacts of such behaviors on the relationship. Survey data…

  17. 40 CFR 89.109 - Maintenance instructions and minimum allowable maintenance intervals.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ultimate purchaser of each new nonroad engine subject to standards under this part written instructions for... manufacturer's maintenance instructions furnished to the ultimate purchaser of the engine under paragraph (a... engine, provided that no maintenance operation is deleted from the maintenance schedule after...

  18. 40 CFR 89.109 - Maintenance instructions and minimum allowable maintenance intervals.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ultimate purchaser of each new nonroad engine subject to standards under this part written instructions for... manufacturer's maintenance instructions furnished to the ultimate purchaser of the engine under paragraph (a... engine, provided that no maintenance operation is deleted from the maintenance schedule after...

  19. 40 CFR 89.109 - Maintenance instructions and minimum allowable maintenance intervals.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ultimate purchaser of each new nonroad engine subject to standards under this part written instructions for... manufacturer's maintenance instructions furnished to the ultimate purchaser of the engine under paragraph (a... engine, provided that no maintenance operation is deleted from the maintenance schedule after...

  20. 14 CFR 43.3 - Persons authorized to perform maintenance, preventive maintenance, rebuilding, and alterations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... major repair, or preventive maintenance, are listed in appendix A. (b) The holder of a mechanic... a mechanic or repairman certificate may perform the maintenance, preventive maintenance, and... pilot is authorized to perform; (3) There is no certificated mechanic available to perform...

  1. 14 CFR 135.433 - Maintenance and preventive maintenance training program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... training program. 135.433 Section 135.433 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... maintenance training program. Each certificate holder or a person performing maintenance or preventive maintenance functions for it shall have a training program to ensure that each person (including...

  2. 47 CFR 80.1074 - Radio maintenance personnel for at-sea maintenance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 5 2012-10-01 2012-10-01 false Radio maintenance personnel for at-sea... AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety System (GMDSS) General Provisions § 80.1074 Radio maintenance personnel for at-sea maintenance. (a)...

  3. 47 CFR 80.1074 - Radio maintenance personnel for at-sea maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Radio maintenance personnel for at-sea... AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety System (GMDSS) General Provisions § 80.1074 Radio maintenance personnel for at-sea maintenance. (a)...

  4. 47 CFR 80.1074 - Radio maintenance personnel for at-sea maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 5 2014-10-01 2014-10-01 false Radio maintenance personnel for at-sea... AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety System (GMDSS) General Provisions § 80.1074 Radio maintenance personnel for at-sea maintenance. (a)...

  5. 47 CFR 80.1074 - Radio maintenance personnel for at-sea maintenance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 5 2013-10-01 2013-10-01 false Radio maintenance personnel for at-sea... AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety System (GMDSS) General Provisions § 80.1074 Radio maintenance personnel for at-sea maintenance. (a)...

  6. 47 CFR 80.1074 - Radio maintenance personnel for at-sea maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Radio maintenance personnel for at-sea... AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety System (GMDSS) General Provisions § 80.1074 Radio maintenance personnel for at-sea maintenance. (a)...

  7. The Chemistry of Swimming Pool Maintenance

    ERIC Educational Resources Information Center

    Salter, Carl; Langhus, David L.

    2007-01-01

    The study of chemistry involved in the maintenance of a swimming pool provides a lot of chemical education to the students, including the demonstration of the importance of pH in water chemistry. The various chemical aspects hidden in the maintenance of the pool are being described.

  8. Preventive Maintenance Guidelines for School Facilities.

    ERIC Educational Resources Information Center

    Maciha, John C.

    This five-part manual, intended to increase the integrity and support the longevity of school facilities, provides easy-to-use preventive maintenance (PM) system guidelines. Part 1 outlines the special considerations of school maintenance as compared to other facilities. Part 2 establishes the basic components of a PM program and provides Work…

  9. Plumbing. Building Maintenance. Module III. Instructor's Guide.

    ERIC Educational Resources Information Center

    Brunk, Art

    This curriculum guide, one of six modules keyed to the building maintenance competency profile developed by industry and education professionals, provides materials for a plumbing procedures unit of seven lessons. Lesson topics are: safety procedures, joining pipes, water systems, fixtures and appliances, maintenance and repair, drainage systems,…

  10. Test, Control and Monitor System maintenance plan

    NASA Technical Reports Server (NTRS)

    Buehler, David P.; Lougheed, M. J.

    1993-01-01

    The maintenance requirements for Test, Control, and Monitor System (TCMS) and the method for satisfying these requirements prior to First Need Date (FND) of the last TCMS set are described. The method for satisfying maintenance requirements following FND of the last TCMS set will be addressed by a revision to this plan. This maintenance plan serves as the basic planning document for maintenance of this equipment by the NASA Payloads Directorate (CM) and the Payload Ground Operations Contractor (PGOC) at KSC. The terms TCMS Operations and Maintenance (O&M), Payloads Logistics, TCMS Sustaining Engineering, Payload Communications, and Integrated Network Services refer to the appropriate NASA and PGOC organization. For the duration of their contract, the Core Electronic Contractor (CEC) will provide a Set Support Team (SST). One of the primary purposes of this team is to help NASA and PGOC operate and maintain TCMS. It is assumed that SST is an integral part of TCMS O&M. The purpose of this plan is to describe the maintenance concept for TCMS hardware and system software in order to facilitate activation, transition planning, and continuing operation. When software maintenance is mentioned in this plan, it refers to maintenance of TCMS system software.

  11. 40 CFR 1042.125 - Maintenance instructions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... accumulation on your emission-data engines as described in § 1042.245 and in 40 CFR part 1065. The restrictions...-related maintenance generally includes maintenance on the components we specify in 40 CFR part 1068... this section: (i) For EGR-related filters and coolers, PCV valves, and fuel injector tips...

  12. 40 CFR 1042.125 - Maintenance instructions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... accumulation on your emission-data engines as described in § 1042.245 and in 40 CFR part 1065. The restrictions...-related maintenance generally includes maintenance on the components we specify in 40 CFR part 1068... this section: (i) For EGR-related filters and coolers, PCV valves, and fuel injector tips...

  13. 40 CFR 1042.125 - Maintenance instructions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... accumulation on your emission-data engines as described in § 1042.245 and in 40 CFR part 1065. The restrictions...-related maintenance generally includes maintenance on the components we specify in 40 CFR part 1068... this section: (i) For EGR-related filters and coolers, PCV valves, and fuel injector tips...

  14. 40 CFR 1042.125 - Maintenance instructions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... accumulation on your emission-data engines as described in § 1042.245 and in 40 CFR part 1065. The restrictions...-related maintenance generally includes maintenance on the components we specify in 40 CFR part 1068... this section: (i) For EGR-related filters and coolers, PCV valves, and fuel injector tips...

  15. Problematics of different technical maintenance for computers

    NASA Technical Reports Server (NTRS)

    Dostalek, Z.

    1977-01-01

    Two modes of operations are used in the technical maintenance of computers: servicing provided by the equipment supplier, and that done by specially trained computer users. The advantages and disadvantages of both modes are discussed. Maintenance downtime is tabulated for two computers serviced by user employees over an eight year period.

  16. 21 CFR 211.58 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Maintenance. 211.58 Section 211.58 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL... Maintenance. Any building used in the manufacture, processing, packing, or holding of a drug product shall...

  17. 7 CFR 772.5 - Security maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... liquidation if warranted. (3) For real estate security for IMP loans, service the account according to 7 CFR... 7 Agriculture 7 2010-01-01 2010-01-01 false Security maintenance. 772.5 Section 772.5 Agriculture... SPECIAL PROGRAMS SERVICING MINOR PROGRAM LOANS § 772.5 Security maintenance. (a) General. Borrowers...

  18. 40 CFR 86.098-25 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Maintenance. 86.098-25 Section 86.098-25 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED...-Fueled and Methanol-Fueled Heavy-Duty Vehicles § 86.098-25 Maintenance. (a) (b)(1)-(2) (3)(i)-(v)...

  19. 49 CFR 399.211 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Maintenance. 399.211 Section 399.211 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... STANDARDS Step, Handhold, and Deck Requirements for Commercial Motor Vehicles § 399.211 Maintenance....

  20. 23 CFR 660.115 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Maintenance. 660.115 Section 660.115 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS SPECIAL PROGRAMS (DIRECT FEDERAL) Forest Highways § 660.115 Maintenance. The cooperator having jurisdiction over a FH...

  1. 14 CFR 91.1113 - Maintenance recordkeeping.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Maintenance recordkeeping. 91.1113 Section 91.1113 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Operations Program Management § 91.1113 Maintenance recordkeeping. Each fractional ownership program...

  2. 30 CFR 56.9313 - Roadway maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Roadway maintenance. 56.9313 Section 56.9313 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... § 56.9313 Roadway maintenance. Water, debris, or spilled material on roadways which creates hazards...

  3. 12 CFR 347.205 - Record maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Record maintenance. 347.205 Section 347.205 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY INTERNATIONAL BANKING Foreign Banks § 347.205 Record maintenance. The records of each insured branch shall...

  4. 12 CFR 347.210 - Asset maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Asset maintenance. 347.210 Section 347.210 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY INTERNATIONAL BANKING Foreign Banks § 347.210 Asset maintenance. (a) An insured branch of a foreign bank...

  5. 12 CFR 347.205 - Record maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Record maintenance. 347.205 Section 347.205 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY INTERNATIONAL BANKING Foreign Banks § 347.205 Record maintenance. The records of each insured branch shall...

  6. 12 CFR 347.205 - Record maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Record maintenance. 347.205 Section 347.205 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY INTERNATIONAL BANKING Foreign Banks § 347.205 Record maintenance. The records of each insured branch shall...

  7. 12 CFR 347.205 - Record maintenance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Record maintenance. 347.205 Section 347.205 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY INTERNATIONAL BANKING Foreign Banks § 347.205 Record maintenance. The records of each insured branch shall...

  8. 12 CFR 347.210 - Asset maintenance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Asset maintenance. 347.210 Section 347.210 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY INTERNATIONAL BANKING Foreign Banks § 347.210 Asset maintenance. (a) An insured branch of a foreign bank...

  9. 12 CFR 347.210 - Asset maintenance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Asset maintenance. 347.210 Section 347.210 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY INTERNATIONAL BANKING Foreign Banks § 347.210 Asset maintenance. (a) An insured branch of a foreign bank...

  10. 12 CFR 347.210 - Asset maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Asset maintenance. 347.210 Section 347.210 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY INTERNATIONAL BANKING Foreign Banks § 347.210 Asset maintenance. (a) An insured branch of a foreign bank...

  11. 12 CFR 347.210 - Asset maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Asset maintenance. 347.210 Section 347.210 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY INTERNATIONAL BANKING Foreign Banks § 347.210 Asset maintenance. (a) An insured branch of a foreign bank...

  12. 12 CFR 347.205 - Record maintenance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Record maintenance. 347.205 Section 347.205 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY INTERNATIONAL BANKING Foreign Banks § 347.205 Record maintenance. The records of each insured branch shall...

  13. 40 CFR 1042.125 - Maintenance instructions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... service accumulation on your emission-data engines. (c) Special maintenance. You may specify more frequent... written maintenance instructions that a repair shop or person of the owner's choosing may maintain... warranty on a requirement that the engine be serviced by your franchised dealers or any other...

  14. Maintenance program guidelines for programmatic equipment

    SciTech Connect

    Not Available

    1994-11-01

    The Division Directors at Lawrence Berkeley Laboratory are responsible for implementing a maintenance program for research equipment (also referred to as programmatic equipment) assigned to them. The program must allow maintenance to be accomplished in a manner that promotes operational safety, environmental protection and compliance, and cost effectiveness; that preserves the intended functions of the facilities and equipment; and that supports the programmatic mission of the Laboratory. Programmatic equipment -- such as accelerators, lasers, radiation detection equipment, and glove boxes -- is dedicated specifically to research. Installed equipment, by contrast, includes the mechanical and electrical systems installed as part of basic building construction, equipment essential to the normal functioning of the facility and its intended use. Examples of installed equipment are heating, ventilating, and air conditioning systems; elevators; and communications systems. The LBL Operating and Assurance Program Plan (PUB-3111, Revision 4) requires that a maintenance program be prepared for programmatic equipment and defines the basic maintenance program elements. Such a program of regular, documented maintenance is vital to the safety and quality of research activities. As a part of that support, this document offers guidance to Laboratory organizations for developing their maintenance programs. It clarifies the maintenance requirements of the Operating and Assurance Program (OAP) and presents an approach that, while not the only possibility, can be expected to produce an effective maintenance program for research equipment belonging to the Laboratory`s organizations.

  15. Minor Maintenance. A Resource Manual for Custodians.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee.

    Areas of minor maintenance covered by this manual are--(1) electrical, (2) carpentry, (3) plumbing, (4) painting, and (5) masonry. Each area is defined, tools and equipment for maintenance are listed, and the job procedure is given. The description of electrical work also covers sources of electricity and power transmission. The description of…

  16. Maintenance Downtime Wednesday, 2/24

    Atmospheric Science Data Center

    2016-02-23

    ... 07:00 am - 12:00 pm EST Event Impact:  The Data Pool, MISR order and browse tools, TAD, TES and MOPITT Search and Subset ... unavailable from 7am - 12pm for scheduled maintenance. Data processing and distribution may be impacted during maintenance.   ...

  17. Maintenance Downtime Wed., 5/04

    Atmospheric Science Data Center

    2016-05-04

    ... 07:00 am - 11:00 am EST Event Impact:  The Data Pool, Reverb, MISR order and browse tools, CERES, MOPITT, TAD and TES ... Wed. at 7am - 11am for scheduled maintenance. Data processing and distribution may be impacted during maintenance. We apologize ...

  18. 30 CFR 57.5066 - Maintenance standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Maintenance standards. 57.5066 Section 57.5066... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Air Quality, Radiation... Maintenance standards. (a) Any diesel powered equipment operated at any time in underground areas must...

  19. School Bus Maintenance. Bulletin, 1948, No. 2

    ERIC Educational Resources Information Center

    Featherston, E. Glenn

    1948-01-01

    This bulletin is one in the series on pupil transportation issued by the Office of Education. Its purpose is to furnish information and guidance for local school administrators and others who are concerned with school bus maintenance. Programs of school bus maintenance vary among the 48 States. Presumably all contract vehicles are maintained by…

  20. 40 CFR 1033.125 - Maintenance instructions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Maintenance instructions. 1033.125 Section 1033.125 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Emission Standards and Related Requirements § 1033.125 Maintenance instructions. Give the owner of...

  1. Operation and maintenance cost-cutting

    SciTech Connect

    Hollingshead, T.W.

    1996-12-31

    This presentation by Timothy W. Hollingshead, Technical Services Manager, Pacific Gas and Electric, is about cutting costs in the Operation and Maintenance phase of geothermal energy production. The necessity of cost control, keeping workers well-trained and avoiding OSHA fines, taking advantages of new technologies, and establishing predictive maintenance programs are some of the issues discussed in this article.

  2. Stick with a School Maintenance Plan

    ERIC Educational Resources Information Center

    Kennedy, Mike

    2012-01-01

    The U.S. Department of Education's "Planning Guide for Maintaining School Facilities" states that a sound facilities maintenance plan serves as evidence that school facilities are, and will be, cared for appropriately. On the other hand, negligent facilities maintenance planning can cause real problems. Budget restraints and cuts in areas not…

  3. 47 CFR 80.96 - Maintenance tests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 5 2012-10-01 2012-10-01 false Maintenance tests. 80.96 Section 80.96... tests. Stations are authorized to engage in test transmissions necessary for maintenance of the station. Test transmissions must conform to appropriate test operating procedures....

  4. Standardized Curriculum for General Industrial Maintenance Trades.

    ERIC Educational Resources Information Center

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    Standardized vocational education course titles and core contents for two courses in Mississippi are provided: general industrial maintenance trades I and II. The first course contains the following units: (1) orientation and leadership activities; (2) safety; (3) blueprint reading; (4) oxyacetylene cutting; (5) preventative maintenance; (6)…

  5. Computer Maintenance Technology. Suggested Basic Course Outline.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This competency-based basic course outline is designed for a two-year secondary program in computer maintenance technology. The first year is devoted to basic electricity and electronics, the second to the troubleshooting, maintenance, and service of microcomputers. (The repair section is based upon the Apple II computer, disc drive, monitor, and…

  6. The Cognitive Behavioral Approach to Weight Maintenance.

    ERIC Educational Resources Information Center

    Girdano, Dorothy Dusek

    The cognitive behavioral approach to weight maintenance assumes that obese people should be concerned with weight control rather than weight loss, and it embraces both the behavioral approach and a maintenance program which examines risks, value priorities, and the basic principles of weight loss/weight gain. The University of Maryland offers a…

  7. 50 CFR 80.17 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) FINANCIAL ASSISTANCE-WILDLIFE SPORT FISH RESTORATION PROGRAM ADMINISTRATIVE REQUIREMENTS, PITTMAN-ROBERTSON WILDLIFE RESTORATION AND DINGELL-JOHNSON SPORT FISH RESTORATION ACTS § 80.17 Maintenance. The State is responsible for maintenance of all capital improvements acquired or constructed with Wildlife and Sport...

  8. 47 CFR 101.1109 - Records maintenance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 5 2013-10-01 2013-10-01 false Records maintenance. 101.1109 Section 101.1109 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Competitive Bidding Procedures for LMDS § 101.1109 Records maintenance. All winning...

  9. 47 CFR 101.1109 - Records maintenance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 5 2012-10-01 2012-10-01 false Records maintenance. 101.1109 Section 101.1109 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Competitive Bidding Procedures for LMDS § 101.1109 Records maintenance. All winning...

  10. 47 CFR 101.1109 - Records maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 5 2014-10-01 2014-10-01 false Records maintenance. 101.1109 Section 101.1109 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Competitive Bidding Procedures for LMDS § 101.1109 Records maintenance. All winning...