Science.gov

Sample records for 2-d photonic crystals

  1. Progress in 2D photonic crystal Fano resonance photonics

    NASA Astrophysics Data System (ADS)

    Zhou, Weidong; Zhao, Deyin; Shuai, Yi-Chen; Yang, Hongjun; Chuwongin, Santhad; Chadha, Arvinder; Seo, Jung-Hun; Wang, Ken X.; Liu, Victor; Ma, Zhenqiang; Fan, Shanhui

    2014-01-01

    In contrast to a conventional symmetric Lorentzian resonance, Fano resonance is predominantly used to describe asymmetric-shaped resonances, which arise from the constructive and destructive interference of discrete resonance states with broadband continuum states. This phenomenon and the underlying mechanisms, being common and ubiquitous in many realms of physical sciences, can be found in a wide variety of nanophotonic structures and quantum systems, such as quantum dots, photonic crystals, plasmonics, and metamaterials. The asymmetric and steep dispersion of the Fano resonance profile promises applications for a wide range of photonic devices, such as optical filters, switches, sensors, broadband reflectors, lasers, detectors, slow-light and non-linear devices, etc. With advances in nanotechnology, impressive progress has been made in the emerging field of nanophotonic structures. One of the most attractive nanophotonic structures for integrated photonics is the two-dimensional photonic crystal slab (2D PCS), which can be integrated into a wide range of photonic devices. The objective of this manuscript is to provide an in depth review of the progress made in the general area of Fano resonance photonics, focusing on the photonic devices based on 2D PCS structures. General discussions are provided on the origins and characteristics of Fano resonances in 2D PCSs. A nanomembrane transfer printing fabrication technique is also reviewed, which is critical for the heterogeneous integrated Fano resonance photonics. The majority of the remaining sections review progress made on various photonic devices and structures, such as high quality factor filters, membrane reflectors, membrane lasers, detectors and sensors, as well as structures and phenomena related to Fano resonance slow light effect, nonlinearity, and optical forces in coupled PCSs. It is expected that further advances in the field will lead to more significant advances towards 3D integrated photonics, flat

  2. Monochromatic Wannier Functions in the Theory of 2D Photonic Crystals and Photonic Crystal Fibers

    SciTech Connect

    Mazhirina, Yu. A.; Melnikov, L. A.

    2011-10-03

    The use of the monochromatic Wannier functions which have the temporal dependence as (exp(-i{omega}t)) in the theory of 2D photonic crystals and photonic crystal fibers is proposed. Corresponding equations and formulae are derived and discussed.

  3. Suspended 2-D photonic crystal aluminum nitride membrane reflector.

    PubMed

    Ho, Chong Pei; Pitchappa, Prakash; Soon, Bo Woon; Lee, Chengkuo

    2015-04-20

    We experimentally demonstrated a free-standing two-dimensional (2-D) photonic crystal (PhC) aluminum nitride (AlN) membrane to function as a free space (or out-of-plane) reflector working in the mid infrared region. By etching circular holes of radius 620nm in a 330nm thick AlN slab, greater than 90% reflection was measured from 3.08μm to 3.78μm, with the peak reflection of 96% at 3.16μm. Due to the relatively low refractive index of AlN, we also investigated the importance of employing methods such as sacrificial layer release to enhance the performance of the PhC. In addition, characterization of the AlN based PhC was also done up to 450°C to examine the impact of thermo-optic effect on the performance. Despite the high temperature operation, the redshift in the peak reflection wavelengths of the device was estimated to be only 14.1nm. This equates to a relatively low thermo-optic coefficient 2.22 × 10(-5) K(-1) for AlN. Such insensitivity to thermo-optic effect makes AlN based 2-D PhC a promising technology to be used as photonic components for high temperature applications such as Fabry-Perot interferometer used for gas sensing in down-hole oil drilling and ruggedized electronics. PMID:25969099

  4. Optimization and Design of 2d Honeycomb Lattice Photonic Crystal Modulated by Liquid Crystals

    NASA Astrophysics Data System (ADS)

    Guo, Caihong; Zheng, Jihong; Gui, Kun; Zhang, Menghua; Zhuang, Songlin

    2013-12-01

    Photonic crystals (PCs) with infiltrating liquid crystals (LCs) have many potential applications because of their ability to continuously modulate the band-gaps. Using the plane-wave expansion method (PWM), we simulate the band-gap distribution of 2D honeycomb lattice PC with different pillar structures (circle, hexagonal and square pillar) and with different filling ratios, considering both when the LC is used as filling pillar material and semiconductors (Si, Ge) are used in the substrate, and when the semiconductors (Si, Ge) are pillar material and the LC is the substrate. Results show that unlike LC-based triangle lattice PC, optimized honeycomb lattice PC has the ability to generate absolute photonic band-gaps for fabricating optical switches. We provide optimization parameters for LC infiltrating honeycomb lattice PC structure based on simulation results and analysis.

  5. THz quantum cascade lasers operating on the radiative modes of a 2D photonic crystal.

    PubMed

    Halioua, Y; Xu, G; Moumdji, S; Li, L H; Davies, A G; Linfield, E H; Colombelli, R

    2014-07-01

    Photonic-crystal lasers operating on Γ-point band-edge states of a photonic structure naturally exploit the so-called "nonradiative" modes. As the surface output coupling efficiency of these modes is low, they have relatively high Q factors, which favor lasing. We propose a new 2D photonic-crystal design that is capable of reversing this mode competition and achieving lasing on the radiative modes instead. Previously, this has only been shown in 1D structures, where the central idea is to introduce anisotropy into the system, both at unit-cell and resonator scales. By applying this concept to 2D photonic-crystal patterned terahertz frequency quantum cascade lasers, surface-emitting devices with diffraction-limited beams are demonstrated, with 17 mW peak output power. PMID:24978782

  6. Investigation of frequency-selective devices based on a microstrip 2D photonic crystal

    NASA Astrophysics Data System (ADS)

    Belyaev, B. A.; Khodenkov, S. A.; Shabanov, V. F.

    2016-04-01

    The frequency-selective properties of structures based on a 2D microstrip photonic crystal have been investigated theoretically and experimentally. It is shown that various microwave devices, including diplexers, bandpass filters, and double bandpass filters, can be designed based on these structures.

  7. Dispersion properties of a 2D magnetized plasma metallic photonic crystal

    SciTech Connect

    Fu, T.; Yang, Z.; Shi, Z.; Lan, F.; Li, D.; Gao, X.

    2013-02-15

    This is a study on a 2D magnetized plasma-filled metal photonic crystal (PMPC). We analyze the dispersion relation of the magnetized PMPC by using the finite-difference time-domain method. Results show a cutoff frequency for the PMPC, and two flat bands and new forbidden band gaps appear due to the external magnetic field. Adjusting the external magnetic field can control the positions of the flat bands, cutoff frequency, and location and width of the local gap. These results provide theoretical basis for designing tunable photonic crystal devices.

  8. Computational Study and Analysis of Structural Imperfections in 1D and 2D Photonic Crystals

    SciTech Connect

    K.R. Maskaly

    2005-06-01

    Dielectric reflectors that are periodic in one or two dimensions, also known as 1D and 2D photonic crystals, have been widely studied for many potential applications due to the presence of wavelength-tunable photonic bandgaps. However, the unique optical behavior of photonic crystals is based on theoretical models of perfect analogues. Little is known about the practical effects of dielectric imperfections on their technologically useful optical properties. In order to address this issue, a finite-difference time-domain (FDTD) code is employed to study the effect of three specific dielectric imperfections in 1D and 2D photonic crystals. The first imperfection investigated is dielectric interfacial roughness in quarter-wave tuned 1D photonic crystals at normal incidence. This study reveals that the reflectivity of some roughened photonic crystal configurations can change up to 50% at the center of the bandgap for RMS roughness values around 20% of the characteristic periodicity of the crystal. However, this reflectivity change can be mitigated by increasing the index contrast and/or the number of bilayers in the crystal. In order to explain these results, the homogenization approximation, which is usually applied to single rough surfaces, is applied to the quarter-wave stacks. The results of the homogenization approximation match the FDTD results extremely well, suggesting that the main role of the roughness features is to grade the refractive index profile of the interfaces in the photonic crystal rather than diffusely scatter the incoming light. This result also implies that the amount of incoherent reflection from the roughened quarterwave stacks is extremely small. This is confirmed through direct extraction of the amount of incoherent power from the FDTD calculations. Further FDTD studies are done on the entire normal incidence bandgap of roughened 1D photonic crystals. These results reveal a narrowing and red-shifting of the normal incidence bandgap with

  9. Demonstration of superprism effect in silicon pillar 2-D photonic crystal infiltrated with liquid crystals

    NASA Astrophysics Data System (ADS)

    Baroni, Pierre-Yves; Paeder, Vincent; Chang, Yu-Chi; Roussey, Matthieu; Herzig, Hans Peter; Nakagawa, Wataru

    2011-01-01

    Superprism-based deflection of an optical beam is observed in a photonic crystal composed of a triangular lattice of pillars infiltrated with a liquid crystal. The device is based on a Silicon-on-insulator substrate and operates in the telecommunications band. The experimental results show a wavelength shift of 0.76 μm/nm, in reasonable agreement with simulations. Temperature-based control of the liquid crystal properties is also shown to modulate the superprism characteristics.

  10. Analysis of tunable bandgaps in liquid crystal-infiltrated 2D silicon photonic crystals

    NASA Astrophysics Data System (ADS)

    Cos, J.; Ferré-Borrull, J.; Pallarès, J.; Marsal, L. F.

    2010-09-01

    We present a theoretical study on two-dimensional photonic crystals composed of silicon and the E7 liquid crystal. We analyze how the optical axis orientation of the liquid crystal influences the photonic bands and bandgaps, for the case when the Maxwell equations can be decoupled into the TE and TM modes. We consider two different structures, a triangular lattice of E7 liquid crystal cylinders in a silicon background and a triangular lattice of silicon cylinders in an E7 liquid crystal background. The effect of the liquid crystal anisotropy on the geometry of the irreducible Brillouin zone allows us to propose a simplified way to calculate the photonic bandgaps. Results show that the bandgap width and center frequency have a 60° periodicity for both structures. Using the plane-wave expansion method, we determined the maximum bandgap and the optimal radius of the cylinders for each structure. Finally, for the second structure, we propose an optical switch with a 50% duty cycle. These structures can be applied to design tunable photonic devices.

  11. All-optical digital 4 × 2 encoder based on 2D photonic crystal ring resonators

    NASA Astrophysics Data System (ADS)

    Moniem, Tamer A.

    2016-04-01

    The photonic crystals draw significant attention to build all-optical logic devices and are considered one of the solutions for the opto-electronic bottleneck via speed and size. The paper presents a novel optical 4 × 2 encoder based on 2D square lattice photonic crystals of silicon rods. The main realization of optical encoder is based on the photonic crystal ring resonator NOR gates. The proposed structure has four logic input ports, two output ports, and two bias input port. The photonic crystal structure has a square lattice of silicon rods with a refractive index of 3.39 in air. The structure has lattice constant 'a' equal to 630 nm and bandgap range from 0.32 to 044. The total size of the proposed 4 × 2 encoder is equal to 35 μm × 35 μm. The simulation results using the dimensional finite difference time domain and Plane Wave Expansion methods confirm the operation and the feasibility of the proposed optical encoder for ultrafast optical digital circuits.

  12. Light trapping at Dirac point in 2D triangular Archimedean-like lattice photonic crystal.

    PubMed

    Mao, Qiuping; Xie, Kang; Hu, Lei; Li, Qian; Zhang, Wei; Jiang, Haiming; Hu, Zhijia; Wang, Erlei

    2016-04-20

    Optical cavities and waveguides are critical parts of modern optical devices. Traditionally, optical cavities and waveguides rely on photonic bandgaps, or total internal reflection, to achieve light trapping. It has been reported that a novel light trapping, which exists in triangular and honeycomb lattices, is attributed to the so-called Dirac point. Our analysis reveals that 2D triangular Archimedean-like lattice photonic crystals also can support this Dirac mode with similar characteristics. This is a new type of localized mode with a different algebraic field profile at a different specified Dirac frequency, which is also beyond any complete photonic bandgap. The new wave localization has different features and can be applied to the design of new optical devices. PMID:27140119

  13. Modeling and design of a 2D photonic crystal microcavity on polymer material for sensing applications

    NASA Astrophysics Data System (ADS)

    Ciminelli, C.; Armenise, M. N.

    2007-07-01

    In this paper report on the design of a 2D PBG filter in polymeric material. The filter is a Fabry-Perot cavity having a self-sustained membrane configuration. A deep parametric analysis has been carried out for improving the performance, taking also into account the fabrication tolerances Best performance in terms of lateral confinement have been obtained in case of square lattice. As for materials, polystyrene shown best in terms of refractive index value, length of the photonic crystal structure and attenuation value in the band gap. The filter can be used either in sensing applications or in telecommunication field.

  14. 2D photonic crystal complete band gap search using a cyclic cellular automaton refination

    NASA Astrophysics Data System (ADS)

    González-García, R.; Castañón, G.; Hernández-Figueroa, H. E.

    2014-11-01

    We present a refination method based on a cyclic cellular automaton (CCA) that simulates a crystallization-like process, aided with a heuristic evolutionary method called differential evolution (DE) used to perform an ordered search of full photonic band gaps (FPBGs) in a 2D photonic crystal (PC). The solution is proposed as a combinatorial optimization of the elements in a binary array. These elements represent the existence or absence of a dielectric material surrounded by air, thus representing a general geometry whose search space is defined by the number of elements in such array. A block-iterative frequency-domain method was used to compute the FPBGs on a PC, when present. DE has proved to be useful in combinatorial problems and we also present an implementation feature that takes advantage of the periodic nature of PCs to enhance the convergence of this algorithm. Finally, we used this methodology to find a PC structure with a 19% bandgap-to-midgap ratio without requiring previous information of suboptimal configurations and we made a statistical study of how it is affected by disorder in the borders of the structure compared with a previous work that uses a genetic algorithm.

  15. 2D photonic crystals on the Archimedean lattices (tribute to Johannes Kepler (1571 1630))

    NASA Astrophysics Data System (ADS)

    Gajić, R.; class="cross-out">D. Jovanović,

    2008-03-01

    Results of our research on 2D Archemedean lattice photonic crystals are presented. This involves the calculations of the band structures, band-gap maps, equifrequency contours and FDTD simulations of electromagnetic propagation through the structures as well as an experimental verification of negative refraction at microwaves. The band-gap dependence on dielectric contrast is established both for dielectric rods in air and air-holes in dielectric materials. A special emphasis is placed on possibilities of negative refraction and left-handedness in these structures. Together with the familiar Archimedean lattices like square, triangular, honeycomb and Kagome' ones, we consider also, the less known, (3 2, 4, 3, 4) (ladybug) and (3, 4, 6, 4) (honeycomb-ring) structures.

  16. Nonlinear Raman-Nath diffraction of femtosecond laser pulses in a 2D nonlinear photonic crystal.

    PubMed

    Vyunishev, A M; Arkhipkin, V G; Slabko, V V; Baturin, I S; Akhmatkhanov, A R; Shur, V Ya; Chirkin, A S

    2015-09-01

    We study second-harmonic generation (SHG) of femtosecond laser pulses in a rectangular two-dimensional nonlinear photonic crystal (NLPC). Multiple SH beams were observed in the vicinity of the propagation direction of the fundamental beam. It has been verified that the angular positions of these beams obey the conditions of nonlinear Raman-Nath diffraction (NRND). The measured SH spectra of specific NRND orders consist of narrow peaks that experience a high-frequency spectral shift as the order grows. We derive an analytical expression for the process studied and find the theoretical results to be in good agreement with the experimental data. We estimate the enhancement factor of nonlinear Raman-Nath diffraction in 2D NLPC to be 70. PMID:26368697

  17. Remarkable enhancement of upconversion luminescence on 2-D anodic aluminum oxide photonic crystals

    NASA Astrophysics Data System (ADS)

    Wang, He; Yin, Ze; Xu, Wen; Zhou, Donglei; Cui, Shaobo; Chen, Xu; Cui, Haining; Song, Hongwei

    2016-05-01

    Lanthanide-doped upconversion nanoparticles (UCNPs) are attracting extensive attention due to their unique physical properties and great application potential. However, the lower luminescence quantum yield/strength is still an obstacle for real application. Local field modulation is a promising method to highly enhance the upconversion luminescence (UCL) of the UCNPs. In this work, a novel kind of two-dimensional photonic crystal (2D-PC), anodic aluminum oxides (AAOs), was explored to improve the UCL of NaYF4:Yb3+,Er3+ nanoplates (NPs). An optimum enhancement factor (EF) of 65-fold was obtained for the overall intensity of Er3+ under 980 nm excitation, and 130-fold for the red emission. Systematic studies indicate that UCL enhancement mainly originates from the enlargement of the excitation field by scattering and reflection of AAO PCs. It should also be highlighted that the modulation of 2D-PC on the UCL of NaYF4:Yb3+,Er3+ NPs demonstrates weak size-dependent and thickness-dependent behavior, which is well consistent with the stimulated electromagnetic field distribution by the finite difference time domain (FDTD) method.Lanthanide-doped upconversion nanoparticles (UCNPs) are attracting extensive attention due to their unique physical properties and great application potential. However, the lower luminescence quantum yield/strength is still an obstacle for real application. Local field modulation is a promising method to highly enhance the upconversion luminescence (UCL) of the UCNPs. In this work, a novel kind of two-dimensional photonic crystal (2D-PC), anodic aluminum oxides (AAOs), was explored to improve the UCL of NaYF4:Yb3+,Er3+ nanoplates (NPs). An optimum enhancement factor (EF) of 65-fold was obtained for the overall intensity of Er3+ under 980 nm excitation, and 130-fold for the red emission. Systematic studies indicate that UCL enhancement mainly originates from the enlargement of the excitation field by scattering and reflection of AAO PCs. It should

  18. Enhanced Absorption in 2D Materials Via Fano- Resonant Photonic Crystals

    SciTech Connect

    Wang, Wenyi; Klotz, Andrey; Yang, Yuanmu; Li, Wei; Kravchenko, Ivan I.; Briggs, Dayrl P.; Bolotin, Kirill; Valentine, Jason

    2015-05-01

    The use of two-dimensional (2D) materials in optoelectronics has attracted much attention due to their fascinating optical and electrical properties. For instance, graphenebased devices have been employed for applications such as ultrafast and broadband photodetectors and modulators while transition metal dichalcogenide (TMDC) based photodetectors can be used for ultrasensitive photodetection. However, the low optical absorption of 2D materials arising from their atomic thickness limits the maximum attainable external quantum efficiency. For example, in the visible and NIR regimes monolayer MoS2 and graphene absorb only ~10% and 2.3% of incoming light, respectively. Here, we experimentally demonstrate the use of Fano-resonant photonic crystals to significantly boost absorption in atomically thin materials. Using graphene as a test bed, we demonstrate that absorption in the monolayer thick material can be enhanced to 77% within the telecommunications band, the highest value reported to date. We also show that the absorption in the Fano-resonant structure is non-local, with light propagating up to 16 μm within the structure. This property is particularly beneficial in harvesting light from large areas in field-effect-transistor based graphene photodetectors in which separation of photo-generated carriers only occurs ~0.2 μm adjacent to the graphene/electrode interface.

  19. Remarkable enhancement of upconversion luminescence on 2-D anodic aluminum oxide photonic crystals.

    PubMed

    Wang, He; Yin, Ze; Xu, Wen; Zhou, Donglei; Cui, Shaobo; Chen, Xu; Cui, Haining; Song, Hongwei

    2016-05-21

    Lanthanide-doped upconversion nanoparticles (UCNPs) are attracting extensive attention due to their unique physical properties and great application potential. However, the lower luminescence quantum yield/strength is still an obstacle for real application. Local field modulation is a promising method to highly enhance the upconversion luminescence (UCL) of the UCNPs. In this work, a novel kind of two-dimensional photonic crystal (2D-PC), anodic aluminum oxides (AAOs), was explored to improve the UCL of NaYF4:Yb(3+),Er(3+) nanoplates (NPs). An optimum enhancement factor (EF) of 65-fold was obtained for the overall intensity of Er(3+) under 980 nm excitation, and 130-fold for the red emission. Systematic studies indicate that UCL enhancement mainly originates from the enlargement of the excitation field by scattering and reflection of AAO PCs. It should also be highlighted that the modulation of 2D-PC on the UCL of NaYF4:Yb(3+),Er(3+) NPs demonstrates weak size-dependent and thickness-dependent behavior, which is well consistent with the stimulated electromagnetic field distribution by the finite difference time domain (FDTD) method. PMID:27139324

  20. High-Q side-coupled semi-2D-photonic crystal cavity.

    PubMed

    Zhang, Jianhao; Liu, Weixi; Shi, Yaocheng; He, Sailing

    2016-01-01

    High-Q semi-2D-photonic crystal cavities with a tapered edge and side-coupled bus waveguide are demonstrated. With a quadratic design, the unloaded cavity presents a theoretical ultrahigh quality factor up to 6.7 × 10(7) for the condition that there are mere 34 holes in the propagated direction, which is pretty close to the 2D and 1D counterpart. Combined with a side-coupled bus waveguide, an all-pass-type cavity with a loaded quality factor (Q) of over 2.4 × 10(4) and an extinction ratio over 10 dB are experimentally demonstrated. An experimental loaded Q up to 1.1 × 10(5) are also achieved by tuning the coupling between the cavity and the bus waveguide, which is much larger than any reported surface-mode cavity. This cavity is quite suitable for sensors, filters and especially optomechanical devices thanks to the mechanical stability of the cavity and flexibility of the bus waveguide. PMID:27194203

  1. High-Q side-coupled semi-2D-photonic crystal cavity

    PubMed Central

    Zhang, Jianhao; Liu, Weixi; Shi, Yaocheng; He, Sailing

    2016-01-01

    High-Q semi-2D-photonic crystal cavities with a tapered edge and side-coupled bus waveguide are demonstrated. With a quadratic design, the unloaded cavity presents a theoretical ultrahigh quality factor up to 6.7 × 107 for the condition that there are mere 34 holes in the propagated direction, which is pretty close to the 2D and 1D counterpart. Combined with a side-coupled bus waveguide, an all-pass-type cavity with a loaded quality factor (Q) of over 2.4 × 104 and an extinction ratio over 10 dB are experimentally demonstrated. An experimental loaded Q up to 1.1 × 105 are also achieved by tuning the coupling between the cavity and the bus waveguide, which is much larger than any reported surface-mode cavity. This cavity is quite suitable for sensors, filters and especially optomechanical devices thanks to the mechanical stability of the cavity and flexibility of the bus waveguide. PMID:27194203

  2. Fabrication technology of heterojunctions in the lattice of a 2D photonic crystal based on macroporous silicon

    SciTech Connect

    Zharova, Yu. A. Fedulova, G. V.; Astrova, E. V.; Baldycheva, A. V.; Tolmachev, V. A.; Perova, T. S.

    2011-08-15

    Design and fabrication technology of a microcavity structure based on a double heterojunction in macroporous silicon is suggested. The fabrication process of a strip of a 2D photonic crystal constituted by a finite number of lattice periods and the technique for defect formation by local opening of macropores on the substrate side, followed by filling of these macropores with a nematic liquid crystal, are considered.

  3. Investigation of 2D photonic crystal structure based channel drop filter using quad shaped photonic crystal ring resonator for CWDM system

    NASA Astrophysics Data System (ADS)

    Chhipa, Mayur Kumar; Dusad, Lalit Kumar

    2016-05-01

    In this paper, the design & performance of two dimensional (2-D) photonic crystal structure based channel drop filter is investigated using quad shaped photonic crystal ring resonator. In this paper, Photonic Crystal (PhC) based on square lattice periodic arrays of Gallium Indium Phosphide (GaInP) rods in air structure have been investigated using Finite Difference Time Domain (FDTD) method and photonic band gap is being calculated using Plane Wave Expansion (PWE) method. The PhC designs have been optimized for telecommunication wavelength λ= 1571 nm by varying the rods lattice constant. The number of rods in Z and X directions is 21 and 20, with lattice constant 0.540 nm it illustrates that the arrangement of Gallium Indium Phosphide (GaInP) rods in the structure which gives the overall size of the device around 11.4 µm × 10.8 µm. The designed filter gives good dropping efficiency using 3.298, refractive index. The designed structure is useful for CWDM systems. This device may serve as a key component in photonic integrated circuits. The device is ultra compact with the overall size around 123 µm2.

  4. REVIEW ARTICLE: Slow light modes for optical delay lines: 2D photonic crystal-based design structures, performances and challenges

    NASA Astrophysics Data System (ADS)

    Talneau, A.

    2010-10-01

    This paper presents an overview of 2D photonic crystal-based structures designed to display low group velocity as well as reduced group velocity dispersions. Their main envisioned applications are optical delay lines for telecom transmissions at 1.55 µm. Optical mechanisms responsible for slowing down the optical modes and encountered in the slow light regime serve as a guideline for this paper.

  5. Microcavity properties of 2D photonic crystal made by silica matrix doped with magnetic nanoparticles

    NASA Astrophysics Data System (ADS)

    Moukhtari, R.; Hocini, A.; Khedrouche, D.

    2016-01-01

    In this present paper, quality factor of two-dimensional magneto-photonic crystals microcavity fabricated by SiO2/ZrO2 or SiO2/TiO2 matrix doped with magnetic nanoparticles, in which the refractive index varied in the range of 1.51 to 1.58, has been investigated. Finite difference time domain method (3D FDTD) with perfectly matched layers (PML) was used to calculate the transmission spectrum. We demonstrate that the Q factor for the designed cavity increases as the refractive index increases, and found that the Q factor decreases as the volume fraction VF% increases. The obtained results are useful for better designs of magneto photonic crystal devices.

  6. Optical properties of GaAs 2D hexagonal and cubic photonic crystal

    SciTech Connect

    Arab, F. Assali, A.; Grain, R.; Kanouni, F.

    2015-03-30

    In this paper we present our theoretical study of 2D hexagonal and cubic rods GaAs in air, with plan wave expansion (PWE) and finite difference time domain (FDTD) by using BandSOLVE and FullWAVE of Rsoft photonic CAD package. In order to investigate the effect of symmetry and radius, we performed calculations of the band structures for both TM and TE polarization, contour and electromagnetic propagation and transmission spectra. Our calculations show that the hexagonal structure gives a largest band gaps compare to cubic one for a same filling factor.

  7. 2D photonic crystal logic gates based on self-collimated effect

    NASA Astrophysics Data System (ADS)

    Fan, Ranran; Yang, Xiulun; Meng, Xiangfeng; Sun, Xiaowen

    2016-08-01

    Four kinds of logic gates are proposed using interference between the self-collimated beams in photonic crystals, namely NOT, OR, AND and XOR gates, which can be used in the design of photonic integrated circuits. The radius of the splitter and the optical path difference between splitters are adjusted to produce certain phase difference between the reflected and transmitted beams, which may interfere constructively or destructively to realize logical operation. They have high contrast ratios and low power consumption, the extinction ratio between logic 1 and logic 0 for NOT and AND gates can reach 24.7 dB, 30 dB and 12.6 dB for the wavelength used by optical communication (1550 nm), respectively, which makes it potentially applicable for photonic integrated circuits.

  8. Characterization of the bistable wideband optical filter on the basis of nonlinear 2D photonic crystal

    SciTech Connect

    Guryev, I. V. Sukhoivanov, I. A. Andrade Lucio, J. A. Manzano, O. Ibarra Rodriguez, E. Vargaz Gonzales, D. Claudio Chavez, R. I. Mata Gurieva, N. S.

    2014-05-15

    In our work, we investigated the wideband optical filter on the basis of nonlinear photonic crystal. The all-optical flip-flop using ultra-short pulses with duration lower than 200 fs is obtained in such filters. Here we pay special attention to the stability problem of the nonlinear element. To investigate this problem, the temporal response demonstrating the flip-flop have been computed within the certain range of the wavelengths as well as at different input power.

  9. Fano Resonance in GaAs 2D Photonic Crystal Nanocavities

    SciTech Connect

    Valentim, P. T.; Guimaraes, P.S. S.; Luxmoore, I. J.; Szymanski, D.; Whittaker, D. M.; Fox, A. M.; Skolnick, M. S.; Vasco, J. P.; Vinck-Posada, H.

    2011-12-23

    We report the results of polarization resolved reflectivity experiments in GaAs air-bridge photonic crystals with L3 cavities. We show that the fundamental L3 cavity mode changes, in a controlled way, from a Lorentzian symmetrical lineshape to an asymmetrical form when the linear polarization of the incident light is rotated in the plane of the crystal. The different lineshapes are well fitted by the Fano asymmetric equation, implying that a Fano resonance is present in the reflectivity. We use the scattering matrix method to model the Fano interference between a localized discrete state (the cavity fundamental mode) and a background of continuum states (the light reflected from the crystal slab in the vicinity of the cavity) with very good agreement with the experimental data.

  10. Tuning the Structural Color of a 2D Photonic Crystal Using a Bowl-like Nanostructure.

    PubMed

    Umh, Ha Nee; Yu, Sungju; Kim, Yong Hwa; Lee, Su Young; Yi, Jongheop

    2016-06-22

    Structural colors of the ordered photonic nanostructures are widely used as an effective platform for manipulating the propagation of light. Although several approaches have been explored in attempts to mimic the structural colors, improving the reproducibility, mechanical stability, and the economic feasibility of sophisticated photonic crystals prepared by complicated processes continues to pose a challenge. In this study, we report on an alternative, simple method for fabricating a tunable photonic crystal at room temperature. A bowl-like nanostructure of TiO2 was periodically arranged on a thin Ti sheet through a two-step anodization process where its diameters were systemically controlled by changing the applied voltage. Consequently, they displayed a broad color distribution, ranging from red to indigo, and the principal reason for color generation followed the Bragg diffraction theory. This noncolorant method was capable of reproducing a Mondrian painting on a centimeter scale without the need to employ complex architectures, where the generated structural colors were highly stable under mechanical or chemical influence. Such a color printing technique represents a potentially promising platform for practical applications for anticounterfeit trademarks, wearable sensors, and displays. PMID:27245939

  11. Theoretical analysis of the modal behavior of 2D random photonic crystals

    NASA Astrophysics Data System (ADS)

    Hamada, Shimpei; Takeda, Seiji; Viktorovitch, Pierre; Obara, Minoru

    2012-03-01

    We present the effect of structural randomness on the formation of Anderson localization (AL) in random photonic crystals (RPCs) by using a two-dimensional FDTD (Finite-Difference Time-Domain) computational method. The RPC consists of a silicon substrate with an array of air holes aligned in a triangular lattice shape. The structural randomness is introduced by randomly dislocating the positions of air holes. By investigating impulse response of the system, we obtained frequency spectra and Q-factors of long-lived modes. The modal characteristics of the modes as a function of structural randomness in RPCs and optimization of the structural randomness to achieve high photon confinement efficiency are achieved.

  12. Enhanced Absorption in 2D Materials Via Fano- Resonant Photonic Crystals

    DOE PAGESBeta

    Wang, Wenyi; Klotz, Andrey; Yang, Yuanmu; Li, Wei; Kravchenko, Ivan I.; Briggs, Dayrl P.; Bolotin, Kirill; Valentine, Jason

    2015-05-01

    The use of two-dimensional (2D) materials in optoelectronics has attracted much attention due to their fascinating optical and electrical properties. For instance, graphenebased devices have been employed for applications such as ultrafast and broadband photodetectors and modulators while transition metal dichalcogenide (TMDC) based photodetectors can be used for ultrasensitive photodetection. However, the low optical absorption of 2D materials arising from their atomic thickness limits the maximum attainable external quantum efficiency. For example, in the visible and NIR regimes monolayer MoS2 and graphene absorb only ~10% and 2.3% of incoming light, respectively. Here, we experimentally demonstrate the use of Fano-resonant photonicmore » crystals to significantly boost absorption in atomically thin materials. Using graphene as a test bed, we demonstrate that absorption in the monolayer thick material can be enhanced to 77% within the telecommunications band, the highest value reported to date. We also show that the absorption in the Fano-resonant structure is non-local, with light propagating up to 16 μm within the structure. This property is particularly beneficial in harvesting light from large areas in field-effect-transistor based graphene photodetectors in which separation of photo-generated carriers only occurs ~0.2 μm adjacent to the graphene/electrode interface.« less

  13. High plasmon concentration on the surfaces of rectangular metallic rods embedded in air in a 2D photonic crystal

    NASA Astrophysics Data System (ADS)

    Calvo-Velasco, D. M.; Porras-Montenegro, N.

    2016-04-01

    Using the revised plane wave method, we calculated the photonic band structure (PBS) considering TE polarization of a square 2D photonic crystal made of rectangular metallic rods embedded in air. In case of square rods and comparing different plasma frequencies, we found a characteristic band distribution related with the existence of localized plasmons on the rod surfaces, and also we found that this type of rod shape contributes to a high concentration of the electromagnetic field close to the rod corners. Considering rectangular rods and varying one of the sides of the rods, we found a PBS that presents a reorganization of the bands in comparing with the low dispersion present in the square rod case, related with a high localization of the radiation on the rod surfaces.

  14. Investigation of 2D laterally dispersive photonic crystal structures : LDRD 33602 final report.

    SciTech Connect

    Subramania,Ganapathi Subramanian; Vawter, Gregory Allen; Wendt, Joel Robert; Peake, Gregory Merwin; Guo, Junpeng; Peters, David William; Hadley, G. Ronald

    2003-12-01

    Artificially structured photonic lattice materials are commonly investigated for their unique ability to block and guide light. However, an exciting aspect of photonic lattices which has received relatively little attention is the extremely high refractive index dispersion within the range of frequencies capable of propagating within the photonic lattice material. In fact, it has been proposed that a negative refractive index may be realized with the correct photonic lattice configuration. This report summarizes our investigation, both numerically and experimentally, into the design and performance of such photonic lattice materials intended to optimize the dispersion of refractive index in order to realize new classes of photonic devices.

  15. Nanophotonic Filters and Integrated Networks in Flexible 2D Polymer Photonic Crystals

    PubMed Central

    Gan, Xuetao; Clevenson, Hannah; Tsai, Cheng-Chia; Li, Luozhou; Englund, Dirk

    2013-01-01

    Polymers have appealing optical, biochemical, and mechanical qualities, including broadband transparency, ease of functionalization, and biocompatibility. However, their low refractive indices have precluded wavelength-scale optical confinement and nanophotonic applications in polymers. Here, we introduce a suspended polymer photonic crystal (SPPC) architecture that enables the implementation of nanophotonic structures typically limited to high-index materials. Using the SPPC platform, we demonstrate nanophotonic band-edge filters, waveguides, and nanocavities featuring quality (Q) factors exceeding 2, 300 and mode volumes (Vmode) below 1.7(λ/n)3. The unprecedentedly high Q/Vmode ratio results in a spectrally selective enhancement of radiative transitions of embedded emitters via the cavity Purcell effect with an enhancement factor exceeding 100. Moreover, the SPPC architecture allows straightforward integration of nanophotonic networks, shown here by a waveguide-coupled cavity drop filter with sub-nanometer spectral resolution. The nanoscale optical confinement in polymer promises new applications ranging from optical communications to organic opto-electronics, and nanophotonic polymer sensors. PMID:23828320

  16. A super narrow band filter based on silicon 2D photonic crystal resonator and reflectors

    NASA Astrophysics Data System (ADS)

    Wang, Yuanyuan; Chen, Deyuan; Zhang, Gang; Wang, Juebin; Tao, Shangbin

    2016-03-01

    In this paper, a novel structure of super narrow band filter based on two-dimensional square lattice photonic crystals of silicon rods in air for 1.5 um communication is proposed and studied. COMSOL Multiphysics4.3b software is used to simulate the optical behavior of the filter. The filter consists of one point-defect-based resonator and two line-defect-based reflectors. The resonance frequency, transmission coefficient and quality factor are investigated by varying the parameters of the structure. In design, a silicon rod is removed to form the resonator; for the rows of rods above and below the resonator, a part of the rods are removed to form the reflectors. By optimizing the parameters of the filter, the quality factor and transmission coefficient of the filter at the resonance frequency of 2e14 Hz can reach 1330 and 0.953, respectively. The super narrow band filter can be integrated into optical circuit for its micron size. Also, it can be used for wavelength selection and noise filtering of optical amplifier in future communication application.

  17. Ultrasensitive and compact tunable electro-optic filter in a 2D silicon photonic-crystal cavity

    NASA Astrophysics Data System (ADS)

    Ebrahimy, Mehdi N.; Naziri, Mohammad; Andalib, Alireza; Daie Kuzekanani, Ziaddin

    2016-06-01

    In this work, we designed and simulated a high Q-factor photonic crystal cavity with a PN junction to demonstrate a high-sensitivity and high tunable electro-optic filter (EOF). For this purpose, we used a cavity based on 2D photonic crystal structures and created a PN junction with 1 μm width in the center of the cavity to change the refractive index of it. The electro-optic sensitivity of the cavity was improved by reducing modal volume and scattering power. Reverse bias in the range of (‑3.88 V–0.288 V) is applied to the PN junction and the output spectrum is investigated for various bias voltages. The output wavelengths of designed EOF can be tuned by manipulating cavity cells. In final response of EOF the maximum transmission efficiency is more than 93%, the overall Q-factor is more than 14 500. The whole device fits in a compact 102.6 μm2 (17.4 μm  ×  5.9 μm) footprint.

  18. Two bit all-optical analog-to-digital converter based on nonlinear Kerr effect in 2D photonic crystals

    NASA Astrophysics Data System (ADS)

    Youssefi, Bahar; Moravvej-Farshi, Mohammad Kazem; Granpayeh, Nosrat

    2012-06-01

    We have demonstrated the performance of a novel design for a single wavelength 2-bit all-optical analog-to-digital converter (ADC). This converter consists of two high efficient channel drop filters with a coupled cavity-based wavelength selective reflector in a 2D photonic crystal with total length of 15.87 μm. The A/D conversion is achieved by using nonlinear Kerr effect in the cavities. The output ports switch to state '1' at different input power levels to generate unique states preferred for an ADC. This conversion is simulated by the finite difference time domain (FDTD) method for 5 different power levels. The proposed structure can function as a two-bit ADC with a 60 mW/μm input pulse and its maximum sampling rate is found to be ~ 45 GS/s.

  19. Large Area 2D and 3D Colloidal Photonic Crystals Fabricated by a Roll-to-Roll Langmuir-Blodgett Method.

    PubMed

    Parchine, Mikhail; McGrath, Joe; Bardosova, Maria; Pemble, Martyn E

    2016-06-14

    We present our results on the fabrication of large area colloidal photonic crystals on flexible poly(ethylene terephthalate) (PET) film using a roll-to-roll Langmuir-Blodgett technique. Two-dimensional (2D) and three-dimensional (3D) colloidal photonic crystals from silica nanospheres (250 and 550 nm diameter) with a total area of up to 340 cm(2) have been fabricated in a continuous manner compatible with high volume manufacturing. In addition, the antireflective properties and structural integrity of the films have been enhanced via the use of a second roll-to-roll process, employing a slot-die coating of an optical adhesive over the photonic crystal films. Scanning electron microscopy images, atomic force microscopy images, and UV-vis optical transmission and reflection spectra of the fabricated photonic crystals are analyzed. This analysis confirms the high quality of the 2D and 3D photonic crystals fabricated by the roll-to-roll LB technique. Potential device applications of the large area 2D and 3D colloidal photonic crystals on flexible PET film are briefly reviewed. PMID:27218474

  20. Full-vectorial finite element method based eigenvalue algorithm for the analysis of 2D photonic crystals with arbitrary 3D anisotropy.

    PubMed

    Hsu, Sen-Ming; Chang, Hung-Chun

    2007-11-26

    A full-vectorial finite element method based eigenvalue algorithm is developed to analyze the band structures of two-dimensional (2D) photonic crystals (PCs) with arbitray 3D anisotropy for in-planewave propagations, in which the simple transverse-electric (TE) or transverse-magnetic (TM) modes may not be clearly defined. By taking all the field components into consideration simultaneously without decoupling of the wave modes in 2D PCs into TE and TM modes, a full-vectorial matrix eigenvalue equation, with the square of the wavenumber as the eigenvalue, is derived. We examine the convergence behaviors of this algorithm and analyze 2D PCs with arbitrary anisotropy using this algorithm to demonstrate its correctness and usefulness by explaining the numerical results theoretically. PMID:19550864

  1. Influence of elliptical shaped holes on the sensitivity and Q factor in 2D photonic crystals sensor

    NASA Astrophysics Data System (ADS)

    Benmerkhi, A.; Bouchemat, M.; Bouchemat, T.

    2016-07-01

    We theoretically investigate the refractive index sensor based on L2 photonic crystal cavity where neighboring holes are locally infiltrated with polymers. The photonic crystal is composed of periodic triangular hole array patterned perpendicularly to an InP-based confining heterostructure. The number of the holes surrounding a L2 cavity and their shape were modified in order to optimize the sensitivity and quality factor. From this study we have selected two structures that have good results. The first one is called locally which has a very high Q factor and a good sensitivity. Their values are 6.03 × 106 and 163 nm/RIU, respectively. The second optimized structure is called design B, which has a high sensitivity toward 227.78 nm/RIU with a Q factor of 5 × 105. The calculated detect limit for the two designs are lower than 1.59 × 10-6 and 1.4 × 10-5 RIU, respectively.

  2. Band structure of a 2D photonic crystal based on ferrofluids of Co(1-x)Znx Fe2O4 nanoparticles under perpendicular applied magnetic field

    NASA Astrophysics Data System (ADS)

    Lopez, Javier; Gonzalez, Luz Esther; Quinonez, Mario; Porras, Nelson; Zambrano, Gustavo; Gomez, Maria Elena

    2014-03-01

    Using a ferrfluid of cobalt-zinc ferrite nanoparticles Co(1 - x)ZnxFe2O4 coated with oleic acid and suspended in ethanol, we have fabricated a 2D photonic crystal (PC) by the application of an external magnetic field perpendicular to the plane of the ferrofluid. The 2D PC is made by rods of nanoparticles organized in a hexagonal structure. By means of the plane-wave expansion method, we study its photonic band structure (PBS) which depends on the effective permittivity and on the area ratio of the liquid phase. Additionaly, taking into account the Maxwell-Garnett theory we calculated the effective permittivity of the rods. We have found that the effective refractive index of the ferrofluid increases with its magnetization. Using these results we calculate the band structure of the photonic crystal at different applied magnetic fields, finding that the increase of the applied magnetic field shifts the band structure to lower frequencies with the appearance of more band gaps. Departamento de Física, Universidad del Valle, A.A. 25360, Cali, Colombia

  3. Label-free optical detection of C-reactive protein by nanoimprint lithography-based 2D-photonic crystal film.

    PubMed

    Endo, Tatsuro; Kajita, Hiroshi; Kawaguchi, Yukio; Kosaka, Terumasa; Himi, Toshiyuki

    2016-06-01

    The development of high-sensitive, and cost-effective novel biosensors have been strongly desired for future medical diagnostics. To develop novel biosensor, the authors focused on the specific optical characteristics of photonic crystal. In this study, a label-free optical biosensor, polymer-based two-dimensional photonic crystal (2D-PhC) film fabricated using nanoimprint lithography (NIL), was developed for detection of C-reactive protein (CRP) in human serum. The nano-hole array constructed NIL-based 2D-PhC (hole diameter: 230 nm, distance: 230, depth: 200 nm) was fabricated on a cyclo-olefin polymer (COP) film (100 µm) using thermal NIL and required surface modifications to reduce nonspecific adsorption of target proteins. Antigen-antibody reactions on the NIL-based 2D-PhC caused changes to the surrounding refractive index, which was monitored as reflection spectrum changes in the visible region. By using surface modified 2D-PhC, the calculated detection limit for CRP was 12.24 pg/mL at an extremely short reaction time (5 min) without the need for additional labeling procedures and secondary antibody. Furthermore, using the dual-functional random copolymer, CRP could be detected in a pooled blood serum diluted 100× with dramatic reduction of nonspecific adsorption. From these results, the NIL-based 2D-PhC film has great potential for development of an on-site, high-sensitivity, cost-effective, label-free biosensor for medical diagnostics applications. PMID:27150702

  4. All-optical XOR and OR logic gates based on line and point defects in 2-D photonic crystal

    NASA Astrophysics Data System (ADS)

    Goudarzi, Kiyanoosh; Mir, Ali; Chaharmahali, Iman; Goudarzi, Dariush

    2016-04-01

    In this paper, we have proposed an all-optical logic gate structure based on line and point defects created in the two dimensional square lattice of silicon rods in air photonic crystals (PhCs). Line defects are embedded in the ГX and ГZ directions of the momentum space. The device has two input and two output ports. It has been shown analytically whether the initial phase difference between the two input beams is π/2, they interfere together constructively or destructively to realize the logical functions. The simulation results show that the device can acts as a XOR and an OR logic gate. It is applicable in the frequency range of 0-0.45 (a/λ), however we set it at (a/λ=) 0.419 for low dispersion condition, correspondingly the lambda is equal to 1.55 μm. The maximum delay time to response to the input signals is about 0.4 ps, hence the speed of the device is about 2.5 THz. Also 6.767 dB is the maximum contrast ratio of the device.

  5. Characteristic investigation of 2D photonic crystals with full material anisotropy under out-of-plane propagation and liquid-crystal-filled photonic-band-gap-fiber applications using finite element methods.

    PubMed

    Hsu, Sen-ming; Chang, Hung-chun

    2008-12-22

    To effectively investigate the fundamental characteristics of two-dimensional (2D) photonic crystals (PCs) with arbitrary 3D material anisotropy under the out-of-plane wave propagation, we establish a full-vectorial finite element method based eigenvalue algorithm to perform related analysis correctly. The band edge diagrams can be conveniently constructed from the band structures of varied propagation constants obtained from the algorithm, which is helpful for the analysis and design of photonic ban gap (PBG) fibers. Several PCs are analyzed to demonstrate the correctness of this numerical model. Our analysis results for simple PCs are checked with others' ones using different methods, including the transfer matrix method, the finite-difference frequency-domain (FDFD) method, and the plane-wave expansion method. And the validity of those for the most complex PC with arbitrary 3D anisotropy is supported by related liquid-crystal-filled PBG fiber mode analysis, which demonstrates the dependence of transmission properties on the PBGs, employing a full-vectorial finite element beam propagation method (FE-BPM). PMID:19104565

  6. Photonic crystal and photonic wire device structures

    NASA Astrophysics Data System (ADS)

    De La Rue, Richard; Sorel, Marc; Johnson, Nigel; Rahman, Faiz; Ironside, Charles; Cronin, Lee; Watson, Ian; Martin, Robert; Jin, Chongjun; Pottier, Pierre; Chong, Harold; Gnan, Marco; Jugessur, Aju; Camargo, Edilson; Erwin, Grant; Md Zain, Ahmad; Ntakis, Iraklis; Hobbs, Lois; Zhang, Hua; Armenise, Mario; Ciminelli, Caterina; Coquillat, Dominique

    2005-09-01

    Photonic devices that exploit photonic crystal (PhC) principles in a planar environment continue to provide a fertile field of research. 2D PhC based channel waveguides can provide both strong confinement and controlled dispersion behaviour. In conjunction with, for instance, various electro-optic, thermo-optic and other effects, a range of device functionality is accessible in very compact PhC channel-guide devices that offer the potential for high-density integration. Low enough propagation losses are now being obtained with photonic crystal channel-guide structures that their use in real applications has become plausible. Photonic wires (PhWs) can also provide strong confinement and low propagation losses. Bragg-gratings imposed on photonic wires can provide dispersion and frequency selection in device structures that are intrinsically simpler than 2D PhC channel guides--and can compete with them under realistic conditions.

  7. 2D-Crystal-Based Functional Inks.

    PubMed

    Bonaccorso, Francesco; Bartolotta, Antonino; Coleman, Jonathan N; Backes, Claudia

    2016-08-01

    The possibility to produce and process graphene, related 2D crystals, and heterostructures in the liquid phase makes them promising materials for an ever-growing class of applications as composite materials, sensors, in flexible optoelectronics, and energy storage and conversion. In particular, the ability to formulate functional inks with on-demand rheological and morphological properties, i.e., lateral size and thickness of the dispersed 2D crystals, is a step forward toward the development of industrial-scale, reliable, inexpensive printing/coating processes, a boost for the full exploitation of such nanomaterials. Here, the exfoliation strategies of graphite and other layered crystals are reviewed, along with the advances in the sorting of lateral size and thickness of the exfoliated sheets together with the formulation of functional inks and the current development of printing/coating processes of interest for the realization of 2D-crystal-based devices. PMID:27273554

  8. Design optimization of a low-loss and wide-band sharp 120° waveguide bend in 2D photonic crystals

    NASA Astrophysics Data System (ADS)

    Yuan, Jianhua; Yang, Jian; Shi, Dan; Ai, Wenbao; Shuai, Tianping

    2016-05-01

    For two dimensional photonic crystals containing finite cylinders on triangle lattice, a 120° waveguide bend with low-loss and wide-band is obtained in this paper. The optimal process can be divided into two steps: firstly, a conventional waveguide bend can be introduced by maximizing the photonic bandgap; then further optimization involves shifting the position and modifying the radius of only one air hole near the bend. An optimization problem at a given frequency or over a frequency range needs to be solved. It depends on both the field solutions obtained by using the finite element method and the optimization of photonic bandgap obtained by using the plane wave expansion method. With the proposed optimal technique, the result of our optimized design for sharp 120° waveguide bends shows that an obvious low-loss transmission at wavelength 1550 nm can be observed and the maximum value of objective function is able to be rapidly obtained.

  9. Photonic crystal light source

    DOEpatents

    Fleming, James G.; Lin, Shawn-Yu; Bur, James A.

    2004-07-27

    A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

  10. Photonic Crystal Nanocavity Lasers

    NASA Astrophysics Data System (ADS)

    Scherer, Axel

    2001-03-01

    Two- and three-dimensional microfabricated mirrors are generally referred to as photonic bandgap (PBG) crystals, and can be lithographically constructed to match a given frequency to confine light to very small volumes.1 For mirrors matching light emission at 1550nm, the lattice parameter a should correspond to 500nm, and the radius of the holes should be 180nm. By combining the slab waveguide design from microdisk lasers with the concept of microfabricating Bragg reflectors around a 2-D Fabry-Perot structure, we arrive at the design for ultra-small sub-3 optical nanocavity photonic crystal lasers. The mode volume in these laser cavities can be as small as 2.5 cubic half wavelengths or 0.03m3, and spontaneous emission in the cavity can be very efficiently coupled into the lasing mode. This efficient coupling in turn results in significant advantages of these nanocavity lasers over devices with larger mode volumes, as high modulation speed and very low threshold power light emission are expected. If the photonic crystal is designed appropriately and is not too porous, it is also possible to efficiently guide light within the perforated slab and to minimize diffraction losses. This waveguiding within a photonic crystal provides us with an opportunity to couple light from one cavity to another, or into connecting waveguides. By creating two-dimensional photonic crystals, which are microfabricated into InGaAsP slabs, we have recently defined the smallest lasers to date. When combined with high index contrast slabs in which light can be efficiently guided, microfabricated two-dimensional photonic bandgap mirrors provide the geometries needed to confine light into extremely small volumes with high Q.1,2,3,4 Two-dimensional Fabry-Perot resonators with microfabricated mirrors are formed when defects are introduced into the periodic photonic bandgap structure. It is then possible to tune these cavities lithographically by changing the precise geometry of the microstructures

  11. Function photonic crystals

    NASA Astrophysics Data System (ADS)

    Wu, Xiang-Yao; Zhang, Bai-Jun; Yang, Jing-Hai; Liu, Xiao-Jing; Ba, Nuo; Wu, Yi-Heng; Wang, Qing-Cai

    2011-07-01

    In this paper, we present a new kind of function photonic crystals (PCs), whose refractive index is a function of space position. Conventional PCs structure grows from two materials, A and B, with different dielectric constants εA and εB. Based on Fermat principle, we give the motion equations of light in one-dimensional, two-dimensional and three-dimensional function photonic crystals. For one-dimensional function photonic crystals, we give the dispersion relation, band gap structure and transmissivity, and compare them with conventional photonic crystals, and we find the following: (1) For the vertical and non-vertical incidence light of function photonic crystals, there are band gap structures, and for only the vertical incidence light, the conventional PCs have band gap structures. (2) By choosing various refractive index distribution functions n( z), we can obtain more wider or more narrower band gap structure than conventional photonic crystals.

  12. Hybrid 2D photonic crystal-assisted Lu3Al5O12:Ce ceramic-plate phosphor and free-standing red film phosphor for white LEDs with high color-rendering index.

    PubMed

    Park, Hoo Keun; Oh, Ji Hye; Kang, Heejoon; Zhang, Jian; Do, Young Rag

    2015-03-01

    This paper reports the combined optical effects of a two-dimensional (2D) SiNx photonic crystal layer (PCL)-assisted Lu3Al5O12:Ce (LuAG:Ce) green ceramic-plate phosphor (CPP) and a free-standing (Sr,Ca)AlSiN3:Eu red film phosphor to enhance luminous efficacy, color rendering index (CRI), and special CRI (R9) of LuAG:Ce CPP-capped white light-emitting diodes (LEDs) for high-power white LEDs at 350 mA. By introducing the 2D SiNx PCL, the luminous efficacy was improved by a factor of 1.25 and 1.15 compared to that of the conventional flat CPP-capped LED and the thickness-increased CPP-capped LED (with a thickness of 0.15 mm), respectively, while maintaining low color-rendering properties. The combining of the free-standing red film phosphor in the flat CPP-capped, the 2D PCL-assisted CPP-capped, and the thickness-increased CPP-capped LEDs led to enhancement of the CRI and the special CRI (R9); it also led to a decrease of the correlated color temperature (CCT) due to broad wavelength coverage via the addition of red emission. High CRI (94), natural white CCT (4450 K), and acceptable luminous efficacy (71.1 lm/W) were attained from the 2D PCL-assisted LuAG:Ce CPP/free-standing red film phosphor-based LED using a red phosphor concentration of 7.5 wt %. It is expected that the combination of the 2D PCL and the free-standing red film phosphor will be a good candidate for achieving a high-power white CPP-capped LED with excellent CRI. PMID:25675264

  13. Dispersion in photonic crystals

    NASA Astrophysics Data System (ADS)

    Witzens, Jeremy

    2005-11-01

    Investigations on the dispersive properties of photonic crystals, modified scattering in ring-resonators, monolithic integration of vertical-cavity surface-emitting lasers and advanced data processing techniques for the finite-difference time-domain method are presented. Photonic crystals are periodic mesoscopic arrays of scatterers that modify the propagation properties of electromagnetic waves in a similar way as "natural" crystals modify the properties of electrons in solid-state physics. In this thesis photonic crystals are implemented as planar photonic crystals, i.e., optically thin semiconductor films with periodic arrays of holes etched into them, with a hole-to-hole spacing of the order of the wavelength of light in the dielectric media. Photonic crystals can feature forbidden frequency ranges (the band-gaps) in which light cannot propagate. Even though most work on photonic crystals has focused on these band-gaps for application such as confinement and guiding of light, this thesis focuses on the allowed frequency regions (the photonic bands) and investigates how the propagation of light is modified by the crystal lattice. In particular the guiding of light in bulk photonic crystals in the absence of lattice defects (the self-collimation effect) and the angular steering of light in photonic crystals (the superprism effect) are investigated. The latter is used to design a planar lightwave circuit for frequency domain demultiplexion. Difficulties such as efficient insertion of light into the crystal are resolved and previously predicted limitations on the resolution are circumvented. The demultiplexer is also fabricated and characterized. Monolithic integration of vertical-cavity surface-emitting lasers by means of resonantly enhanced grating couplers is investigated. The grating coupler is designed to bend light through a ninety-degree angle and is characterized with the finite-difference time-domain method. The vertical-cavity surface-emitting lasers are

  14. 2D materials for photon conversion and nanophotonics

    NASA Astrophysics Data System (ADS)

    Tahersima, Mohammad H.; Sorger, Volker J.

    2015-09-01

    The field of two-dimensional (2D) materials has the potential to enable unique applications across a wide range of the electromagnetic spectrum. While 2D-layered materials hold promise for next-generation photon-conversion intrinsic limitations and challenges exist that shall be overcome. Here we discuss the intrinsic limitations as well as application opportunities of this new class of materials, and is sponsored by the NSF program Designing Materials to Revolutionize and Engineer our Future (DMREF) program, which links to the President's Materials Genome Initiative. We present general material-related details for photon conversion, and show that taking advantage of the mechanical flexibility of 2D materials by rolling MoS2/graphene/hexagonal boron nitride stack to a spiral solar cell allows for solar absorption up to 90%.

  15. 2D and 3D heterogeneous photonic integrated circuits

    NASA Astrophysics Data System (ADS)

    Yoo, S. J. Ben

    2014-03-01

    Exponential increases in the amount of data that need to be sensed, communicated, and processed are continuing to drive the complexity of our computing, networking, and sensing systems. High degrees of integration is essential in scalable, practical, and cost-effective microsystems. In electronics, high-density 2D integration has naturally evolved towards 3D integration by stacking of memory and processor chips with through-silicon-vias. In photonics, too, we anticipate highdegrees of 3D integration of photonic components to become a prevailing method in realizing future microsystems for information and communication technologies. However, compared to electronics, photonic 3D integration face a number of challenges. This paper will review two methods of 3D photonic integration --- fs laser inscription and layer stacking, and discuss applications and future prospects.

  16. Cooperative dynamics in ultrasoft 2D crystals

    NASA Astrophysics Data System (ADS)

    Sprakel, Joris; van der Meer, Berend; Dijkstra, Marjolein; van der Gucht, Jasper

    2015-03-01

    The creation, annihilation, and diffusion of defects in crystal lattices play an important role during crystal melting and deformation. Although it is well understood how defects form and react when crystals are subjected to external stresses, it remains unclear how crystals cope with internal stresses. We report a study in which we create a highly localized internal stress, by means of optical tweezing, in a crystal formed from micrometer-sized colloidal spheres and directly observe how the solid reacts using microscopy. We find that, even though the excitation is highly localized, a collective dance of colloidal particles results; these collective modes take the form of closed rings or open-ended strings, depending on the sequence of events which nucleate the rearrangements. Surprisingly, we find from Brownian Dynamics simulations that these cooperative dynamics are thermally-activated modes inherent to the crystal, and can even occur through a single, sufficiently large thermal fluctuation, resulting in the irreversible displacement of 100s of particles from their lattice sites.

  17. Tunable electrochromic photonic crystals

    NASA Astrophysics Data System (ADS)

    Kuai, Su-Lan; Bader, Georges; Ashrit, P. V.

    2005-05-01

    Photonic crystals based on the electrochromic phenomenon have been fabricated and proposed for band gap tuning. Electrochromic tungsten trioxide (WO3) inverse opals have been fabricated by polystyrene colloidal crystal templating. The WO3 matrix was obtained through a dip-infiltrating sol-gel process, with subsequent removal of the polymer microspheres by calcination. Scanning electron micrographs confirm the ordering of the hexagonal macroporous structure. The reflection spectra show two pronounced Bragg diffraction peaks. By inserting lithium into the crystals, the first reflection peak shifts gradually toward shorter wavelength for 36 nm, while the second reflection peak shifts toward longer wavelength for about 28 nm. This should be of great interest for photonic device applications.

  18. Nano-scale electronic and optoelectronic devices based on 2D crystals

    NASA Astrophysics Data System (ADS)

    Zhu, Wenjuan

    In the last few years, the research community has been rapidly growing interests in two-dimensional (2D) crystals and their applications. The properties of these 2D crystals are diverse -- ranging from semi-metal such as graphene, semiconductors such as MoS2, to insulator such as boron nitride. These 2D crystals have many unique properties as compared to their bulk counterparts due to their reduced dimensionality and symmetry. A key difference is the band structures, which lead to distinct electronic and photonic properties. The 2D nature of the material also plays an important role in defining their exceptional properties of mechanical strength, surface sensitivity, thermal conductivity, tunable band-gap and their interaction with light. These unique properties of 2D crystals open up a broad territory of applications in computing, communication, energy, and medicine. In this talk, I will present our work on understanding the electrical properties of graphene and MoS2, in particular current transport and band-gap engineering in graphene, interface between gate dielectrics and graphene, and gap states in MoS2. I will also present our work on the nano-scale electronic devices (RF and logic devices) and photonic devices (plasmonic devices and photo-detectors) based on these 2D crystals.

  19. Creating bio-inspired hierarchical 3D-2D photonic stacks via planar lithography on self-assembled inverse opals.

    PubMed

    Burgess, Ian B; Aizenberg, Joanna; Lončar, Marko

    2013-12-01

    Structural hierarchy and complex 3D architecture are characteristics of biological photonic designs that are challenging to reproduce in synthetic materials. Top-down lithography allows for designer patterning of arbitrary shapes, but is largely restricted to planar 2D structures. Self-assembly techniques facilitate easy fabrication of 3D photonic crystals, but controllable defect-integration is difficult. In this paper we combine the advantages of top-down and bottom-up fabrication, developing two techniques to deposit 2D-lithographically-patterned planar layers on top of or in between inverse-opal 3D photonic crystals and creating hierarchical structures that resemble the architecture of the bright green wing scales of the butterfly, Parides sesostris. These fabrication procedures, combining advantages of both top-down and bottom-up fabrication, may prove useful in the development of omnidirectional coloration elements and 3D-2D photonic crystal devices. PMID:24263010

  20. Photonics and optoelectronics of 2D semiconductor transition metal dichalcogenides

    NASA Astrophysics Data System (ADS)

    Mak, Kin Fai; Shan, Jie

    2016-04-01

    Recent advances in the development of atomically thin layers of van der Waals bonded solids have opened up new possibilities for the exploration of 2D physics as well as for materials for applications. Among them, semiconductor transition metal dichalcogenides, MX2 (M = Mo, W; X = S, Se), have bandgaps in the near-infrared to the visible region, in contrast to the zero bandgap of graphene. In the monolayer limit, these materials have been shown to possess direct bandgaps, a property well suited for photonics and optoelectronics applications. Here, we review the electronic and optical properties and the recent progress in applications of 2D semiconductor transition metal dichalcogenides with emphasis on strong excitonic effects, and spin- and valley-dependent properties.

  1. Slotted photonic crystal biosensors

    NASA Astrophysics Data System (ADS)

    Scullion, Mark Gerard

    Optical biosensors are increasingly being considered for lab-on-a-chip applications due to their benefits such as small size, biocompatibility, passive behaviour and lack of the need for fluorescent labels. The light guiding mechanisms used by many of them result in poor overlap of the optical field with the target molecules, reducing the maximum sensitivity achievable. This thesis presents a new platform for optical biosensors, namely slotted photonic crystals, which engender higher sensitivities due to their ability to confine, spatially and temporally, the peak of optical mode within the analyte itself. Loss measurements showed values comparable to standard photonic crystals, confirming their ability to be used in real devices. A novel resonant coupler was designed, simulated, and experimentally tested, and was found to perform better than other solutions within the literature. Combining with cavities, microfluidics and biological functionalization allowed proof-of-principle demonstrations of protein binding to be carried out. High sensitivities were observed in smaller structures than most competing devices in the literature. Initial tests with cellular material for real applications was also performed, and shown to be of promise. In addition, groundwork to make an integrated device that includes the spectrometer function was also carried out showing that slotted photonic crystals themselves can be used for on-chip wavelength specific filtering and spectroscopy, whilst gas-free microvalves for automation were also developed. This body of work presents slotted photonic crystals as a realistic platform for complete on-chip biosensing; addressing key design, performance and application issues, whilst also opening up exciting new ideas for future study.

  2. Hydrophobic photonic crystal fibers.

    PubMed

    Xiao, Limin; Birks, T A; Loh, W H

    2011-12-01

    We propose and demonstrate hydrophobic photonic crystal fibers (PCFs). A chemical surface treatment for making PCFs hydrophobic is introduced. This repels water from the holes of PCFs, so that their optical properties remain unchanged even when they are immersed in water. The combination of a hollow core and a water-repellent inner surface of the hydrophobic PCF provides an ultracompact dissolved-gas sensor element, which is demonstrated for the sensing of dissolved ammonia gas. PMID:22139276

  3. Slotted photonic crystal sensors.

    PubMed

    Scullion, Mark G; Krauss, Thomas F; Di Falco, Andrea

    2013-01-01

    Optical biosensors are increasingly being considered for lab-on-a-chip applications due to their benefits such as small size, biocompatibility, passive behaviour and lack of the need for fluorescent labels. The light guiding mechanisms used by many of them results in poor overlap of the optical field with the target molecules, reducing the maximum sensitivity achievable. This review article presents a new platform for optical biosensors, namely slotted photonic crystals, which provide higher sensitivities due to their ability to confine, spatially and temporally, the optical mode peak within the analyte itself. Loss measurements showed values comparable to standard photonic crystals, confirming their ability to be used in real devices. A novel resonant coupler was designed, simulated, and experimentally tested, and was found to perform better than other solutions within the literature. Combining with cavities, microfluidics and biological functionalization allowed proof-of-principle demonstrations of protein binding to be carried out. Higher sensitivities were observed in smaller structures than possible with most competing devices reported in the literature. This body of work presents slotted photonic crystals as a realistic platform for complete on-chip biosensing; addressing key design, performance and application issues, whilst also opening up exciting new ideas for future study. PMID:23503295

  4. Slotted Photonic Crystal Sensors

    PubMed Central

    Scullion, Mark G.; Krauss, Thomas F.; Di Falco, Andrea

    2013-01-01

    Optical biosensors are increasingly being considered for lab-on-a-chip applications due to their benefits such as small size, biocompatibility, passive behaviour and lack of the need for fluorescent labels. The light guiding mechanisms used by many of them results in poor overlap of the optical field with the target molecules, reducing the maximum sensitivity achievable. This review article presents a new platform for optical biosensors, namely slotted photonic crystals, which provide higher sensitivities due to their ability to confine, spatially and temporally, the optical mode peak within the analyte itself. Loss measurements showed values comparable to standard photonic crystals, confirming their ability to be used in real devices. A novel resonant coupler was designed, simulated, and experimentally tested, and was found to perform better than other solutions within the literature. Combining with cavities, microfluidics and biological functionalization allowed proof-of-principle demonstrations of protein binding to be carried out. Higher sensitivities were observed in smaller structures than possible with most competing devices reported in the literature. This body of work presents slotted photonic crystals as a realistic platform for complete on-chip biosensing; addressing key design, performance and application issues, whilst also opening up exciting new ideas for future study. PMID:23503295

  5. Parametric analysis of 2D guided-wave photonic band gap structures

    NASA Astrophysics Data System (ADS)

    Ciminelli, C.; Peluso, F.; Armenise, M. N.

    2005-11-01

    The parametric analysis of the electromagnetic properties of 2D guided wave photonic band gap structures is reported with the aim of providing a valid tool for the optimal design. The modelling approach is based on the Bloch-Floquet method. Different lattice configurations and geometrical parameters are considered. An optimum value for the ratio between the hole (or rod) radius and the lattice constant does exist and the calculation demonstrated that it is almost independent from the etching depth, only depending on the lattice type. The results are suitable for the design optimisation of photonic crystal reflectors to be used in integrated optical devices.

  6. Parametric analysis of 2D guided-wave photonic band gap structures.

    PubMed

    Ciminelli, C; Peluso, F; Armenise, M

    2005-11-28

    The parametric analysis of the electromagnetic properties of 2D guided wave photonic band gap structures is reported with the aim of providing a valid tool for the optimal design. The modelling approach is based on the Bloch-Floquet method. Different lattice configurations and geometrical parameters are considered. An optimum value for the ratio between the hole (or rod) radius and the lattice constant does exist and the calculation demonstrated that it is almost independent from the etching depth, only depending on the lattice type. The results are suitable for the design optimisation of photonic crystal reflectors to be used in integrated optical devices. PMID:19503180

  7. Photonic Crystal Laser Accelerator Structures

    SciTech Connect

    Cowan, Benjamin M

    2003-05-21

    Photonic crystals have great potential for use as laser-driven accelerator structures. A photonic crystal is a dielectric structure arranged in a periodic geometry. Like a crystalline solid with its electronic band structure, the modes of a photonic crystal lie in a set of allowed photonic bands. Similarly, it is possible for a photonic crystal to exhibit one or more photonic band gaps, with frequencies in the gap unable to propagate in the crystal. Thus photonic crystals can confine an optical mode in an all-dielectric structure, eliminating the need for metals and their characteristic losses at optical frequencies. We discuss several geometries of photonic crystal accelerator structures. Photonic crystal fibers (PCFs) are optical fibers which can confine a speed-of-light optical mode in vacuum. Planar structures, both two- and three-dimensional, can also confine such a mode, and have the additional advantage that they can be manufactured using common microfabrication techniques such as those used for integrated circuits. This allows for a variety of possible materials, so that dielectrics with desirable optical and radiation-hardness properties can be chosen. We discuss examples of simulated photonic crystal structures to demonstrate the scaling laws and trade-offs involved, and touch on potential fabrication processes.

  8. Natural photonic crystals

    NASA Astrophysics Data System (ADS)

    Vigneron, Jean Pol; Simonis, Priscilla

    2012-10-01

    Photonic structures appeared in nature several hundred millions years ago. In the living world, color is used for communication and this important function strongly impacts the individual chances of survival as well as the chances to reproduce. This has a statistical influence on species populations. Therefore, because they are involved in evolution, natural color-generating structures are - from some point of view - highly optimized. In this short review, a survey is presented of the development of natural photonic crystal-type structures occurring in insects, spiders, birds, fishes and other marine animals, in plants and more, from the standpoint of light-waves propagation. One-, two-, and three-dimensional structures will be reviewed with selected examples.

  9. Design and characterization of low-loss 2D grating couplers for silicon photonics integrated circuits

    NASA Astrophysics Data System (ADS)

    Lacava, C.; Carrol, L.; Bozzola, A.; Marchetti, R.; Minzioni, P.; Cristiani, I.; Fournier, M.; Bernabe, S.; Gerace, D.; Andreani, L. C.

    2016-03-01

    We present the characterization of Silicon-on-insulator (SOI) photonic-crystal based 2D grating-couplers (2D-GCs) fabricated by CEA-Leti in the frame of the FP7 Fabulous project, which is dedicated to the realization of devices and systems for low-cost and high-performance passives-optical-networks. On the analyzed samples different test structures are present, including 2D-GC connected to another 2D-GC by different waveguides (in a Mach-Zehnder like configuration), and 2D-GC connected to two separate 2D-GCs, so as to allow a complete assessment of different parameters. Measurements were carried out using a tunable laser source operating in the extended telecom bandwidth and a fiber-based polarization controlling system at the input of device-under-test. The measured data yielded an overall fiber-to-fiber loss of 7.5 dB for the structure composed by an input 2D-GC connected to two identical 2D-GCs. This value was obtained at the peak wavelength of the grating, and the 3-dB bandwidth of the 2D-GC was assessed to be 43 nm. Assuming that the waveguide losses are negligible, so as to make a worst-case analysis, the coupling efficiency of the single 2D-GC results to be equal to -3.75 dB, constituting, to the best of our knowledge, the lowest value ever reported for a fully CMOS compatible 2D-GC. It is worth noting that both the obtained values are in good agreement with those expected by the numerical simulations performed using full 3D analysis by Lumerical FDTD-solutions.

  10. Photonic crystals with active organic materials

    NASA Astrophysics Data System (ADS)

    Wu, Yeheng

    The concept of photonic crystals, which involves periodically arranged dielectrics that form a new type of material having novel photonic properties, was first proposed about two decades ago. Since then, a number of applications in photonic technology have been explored. Specifically, organic and hybrid photonic crystals are promising because of the unique advantages of the organic materials. A one-dimensional (1D) photonic crystal (multilayer) has high reflectance across a certain wavelength range. We report on studies of 1D multilayer polymer films that were fabricated using spin-coating, free film stacking, and co-extrusion techniques. For example, a stack fabricated by placing a laser dye-doped gain medium between two multilayer reflecting polymer films forms a micro-resonator laser or distributed Bragg laser. The resulting laser system is made entirely of plastic and is only several tens of micrometers in thickness. When the gain, a dye-doped medium, comprises one type of a two-type multilayer film, it results a laser exhibiting distributed feedback. At the edge of the photonic band, the group velocity becomes small and the density of photon states becomes high, which leads to laser emission. Such distributed feedback lasers were fabricated using the co-extrusion technique. The refractive indices and the photonic lattice determine the photonic band gap, which can be tuned by changing these parameters. Materials with Kerr nonlinearity exhibit a change in refractive index depending on the incident intensity of the light. To demonstrate such switching, electrochemical etching techniques on silicon wafers were used to form two-dimensional (2D) photonic crystals. By incorporating the nonlinear organic material into the 2D structure, we have made all-optical switches. The reflection of a beam from the 2D photonic crystal can be controlled by another beam because it induces a refractive index change in the active material by altering the reflection band. A mid

  11. Photonic crystal microspheres

    NASA Astrophysics Data System (ADS)

    Zhokhov, A. A.; Masalov, V. M.; Sukhinina, N. S.; Matveev, D. V.; Dolganov, P. V.; Dolganov, V. K.; Emelchenko, G. A.

    2015-11-01

    Spherical samples of photonic crystals formed by colloidal SiO2 nanoparticles were synthesized. Synthesis of microspheres from 160 nm, 200 nm and 430 nm diameter colloidal nanoparticles was performed over a wide size range, from 5 μm to 50 μm. The mechanism of formation of void microparticles exceeding 50 μm is discussed. The spectral measurements verified the association of the spectra with the peaks of selective reflection from the cubic lattice planes. The microparticle morphology is characterized by scanning electron microscopy (SEM).

  12. Optics of globular photonic crystals

    SciTech Connect

    Gorelik, V S

    2007-05-31

    The results of experimental and theoretical studies of the optical properties of globular photonic crystals - new physical objects having a crystal structure with the lattice period exceeding considerably the atomic size, are presented. As globular photonic crystals, artificial opal matrices consisting of close-packed silica globules of diameter {approx}200 nm were used. The reflection spectra of these objects characterising the parameters of photonic bands existing in these crystals in the visible spectral region are presented. The idealised models of the energy band structure of photonic crystals investigated in the review give analytic dispersion dependences for the group velocity and the effective photon mass in a globular photonic crystal. The characteristics of secondary emission excited in globular photonic crystals by monochromatic and broadband radiation are presented. The results of investigations of single-photon-excited delayed scattering of light observed in globular photonic crystals exposed to cw UV radiation and radiation from a repetitively pulsed copper vapour laser are presented. The possibilities of using globular photonic crystals as active media for lasing in different spectral regions are considered. It is proposed to use globular photonic crystals as sensitive sensors in optoelectronic devices for molecular analysis of organic and inorganic materials by the modern methods of laser spectroscopy. The results of experimental studies of spontaneous and stimulated globular scattering of light are discussed. The conditions for observing resonance and two-photon-excited delayed scattering of light are found. The possibility of accumulation and localisation of the laser radiation energy inside a globular photonic crystal is reported. (review)

  13. Measurement of topological invariants in a 2D photonic system

    NASA Astrophysics Data System (ADS)

    Mittal, Sunil; Ganeshan, Sriram; Fan, Jingyun; Vaezi, Abolhassan; Hafezi, Mohammad

    2016-03-01

    A hallmark feature of topological physics is the presence of one-way propagating chiral modes at the system boundary. The chirality of edge modes is a consequence of the topological character of the bulk. For example, in a non-interacting quantum Hall model, edge modes manifest as mid-gap states between two topologically distinct bulk bands. The bulk-boundary correspondence dictates that the number of chiral edge modes, a topological invariant called the winding number, is completely determined by the bulk topological invariant, the Chern number. Here, for the first time, we measure the winding number in a 2D photonic system. By inserting a unit flux quantum at the edge, we show that the edge spectrum resonances shift by the winding number. This experiment provides a new approach for unambiguous measurement of topological invariants, independent of the microscopic details, and could possibly be extended to probe strongly correlated topological orders.

  14. Glassy dislocation dynamics in 2D colloidal dimer crystals.

    PubMed

    Gerbode, Sharon J; Agarwal, Umang; Ong, Desmond C; Liddell, Chekesha M; Escobedo, Fernando; Cohen, Itai

    2010-08-13

    Although glassy relaxation is typically associated with disorder, here we report on a new type of glassy dynamics relating to dislocations within 2D crystals of colloidal dimers. Previous studies have demonstrated that dislocation motion in dimer crystals is restricted by certain particle orientations. Here, we drag an optically trapped particle through such dimer crystals, creating dislocations. We find a two-stage relaxation response where initially dislocations glide until encountering particles that cage their motion. Subsequent relaxation occurs logarithmically slowly through a second process where dislocations hop between caged configurations. Finally, in simulations of sheared dimer crystals, the dislocation mean squared displacement displays a caging plateau typical of glassy dynamics. Together, these results reveal a novel glassy system within a colloidal crystal. PMID:20868079

  15. Photonic Crystal Nanolaser Biosensors

    NASA Astrophysics Data System (ADS)

    Kita, Shota; Otsuka, Shota; Hachuda, Shoji; Endo, Tatsuro; Imai, Yasunori; Nishijima, Yoshiaki; Misawa, Hiroaki; Baba, Toshihiko

    High-performance and low-cost sensors are critical devices for high-throughput analyses of bio-samples in medical diagnoses and life sciences. In this paper, we demonstrate photonic crystal nanolaser sensor, which detects the adsorption of biomolecules from the lasing wavelength shift. It is a promising device, which balances a high sensitivity, high resolution, small size, easy integration, simple setup and low cost. In particular with a nanoslot structure, it achieves a super-sensitivity in protein sensing whose detection limit is three orders of magnitude lower than that of standard surface-plasmon-resonance sensors. Our investigations indicate that the nanoslot acts as a protein condenser powered by the optical gradient force, which arises from the strong localization of laser mode in the nanoslot.

  16. Photonic quasi-crystal terahertz lasers

    PubMed Central

    Vitiello, Miriam Serena; Nobile, Michele; Ronzani, Alberto; Tredicucci, Alessandro; Castellano, Fabrizio; Talora, Valerio; Li, Lianhe; Linfield, Edmund H.; Davies, A. Giles

    2014-01-01

    Quasi-crystal structures do not present a full spatial periodicity but are nevertheless constructed starting from deterministic generation rules. When made of different dielectric materials, they often possess fascinating optical properties, which lie between those of periodic photonic crystals and those of a random arrangement of scatterers. Indeed, they can support extended band-like states with pseudogaps in the energy spectrum, but lacking translational invariance, they also intrinsically feature a pattern of ‘defects’, which can give rise to critically localized modes confined in space, similar to Anderson modes in random structures. If used as laser resonators, photonic quasi-crystals open up design possibilities that are simply not possible in a conventional periodic photonic crystal. In this letter, we exploit the concept of a 2D photonic quasi crystal in an electrically injected laser; specifically, we pattern the top surface of a terahertz quantum-cascade laser with a Penrose tiling of pentagonal rotational symmetry, reaching 0.1–0.2% wall-plug efficiencies and 65 mW peak output powers with characteristic surface-emitting conical beam profiles, result of the rich quasi-crystal Fourier spectrum. PMID:25523102

  17. Spherical colloidal photonic crystals.

    PubMed

    Zhao, Yuanjin; Shang, Luoran; Cheng, Yao; Gu, Zhongze

    2014-12-16

    CONSPECTUS: Colloidal photonic crystals (PhCs), periodically arranged monodisperse nanoparticles, have emerged as one of the most promising materials for light manipulation because of their photonic band gaps (PBGs), which affect photons in a manner similar to the effect of semiconductor energy band gaps on electrons. The PBGs arise due to the periodic modulation of the refractive index between the building nanoparticles and the surrounding medium in space with subwavelength period. This leads to light with certain wavelengths or frequencies located in the PBG being prohibited from propagating. Because of this special property, the fabrication and application of colloidal PhCs have attracted increasing interest from researchers. The most simple and economical method for fabrication of colloidal PhCs is the bottom-up approach of nanoparticle self-assembly. Common colloidal PhCs from this approach in nature are gem opals, which are made from the ordered assembly and deposition of spherical silica nanoparticles after years of siliceous sedimentation and compression. Besides naturally occurring opals, a variety of manmade colloidal PhCs with thin film or bulk morphology have also been developed. In principle, because of the effect of Bragg diffraction, these PhC materials show different structural colors when observed from different angles, resulting in brilliant colors and important applications. However, this angle dependence is disadvantageous for the construction of some optical materials and devices in which wide viewing angles are desired. Recently, a series of colloidal PhC materials with spherical macroscopic morphology have been created. Because of their spherical symmetry, the PBGs of spherical colloidal PhCs are independent of rotation under illumination of the surface at a fixed incident angle of the light, broadening the perspective of their applications. Based on droplet templates containing colloidal nanoparticles, these spherical colloidal PhCs can be

  18. 2D Colloidal Wigner crystals in confined geometries

    NASA Astrophysics Data System (ADS)

    Higler, Ruben; Sprakel, Joris

    2015-03-01

    Crystallization of bulk systems has been widely studied using colloids as a model system. However, study into colloidal crystallization in confined geometries has been sparse and little is known about the effects of strong confinement on the dynamics of colloidal crystal. In our research we prepare 2D crystals from charged colloids in an apolar solvent to study crystal dynamics, formation, and structure in circular confinements. These confining geometries are made using softlithography techniques from SU-8. In order to broaden the parameter space we can reach in experiments we employ brownian dynamics simulations to supplement our experimental results. Using single-particle tracking we have subpixel resolution positional information of every particle in the system. We study the vibrational modes of our confined crystals and find well defined modes unique to confined systems, such as a radially symmetric compression (or breathing) mode, a collective rotation mode, and distinct resonance modes. Furthermore, due to the circular nature of our constrictions, defectless crystals are impossible, we find, for sufficiently high area fractions, that the defects order at well defined points at the edge. The effect of this ``defect-localization'' has a clear influence on the vibrational modes.

  19. Configurable silicon photonic crystal waveguides

    SciTech Connect

    Prorok, Stefan; Petrov, Alexander; Eich, Manfred; Luo, Jingdong; Jen, Alex K.-Y.

    2013-12-23

    In this Letter, we demonstrate that the mode cut off of a photonic crystal waveguide can be trimmed with high accuracy by electron beam bleaching of a chromophore doped polymer cladding. Using this method, configurable waveguides are realized, which allow for spatially resolved changes of the photonic crystal's effective lattice constant as small as 7.6 pm. We show three different examples how to take advantage of configurable photonic crystal waveguides: Shifting of the complete transmission spectrum, definition of cavities with high quality factor, and tuning of existing cavities.

  20. Multicolor photonic crystal laser array

    SciTech Connect

    Wright, Jeremy B; Brener, Igal; Subramania, Ganapathi S; Wang, George T; Li, Qiming

    2015-04-28

    A multicolor photonic crystal laser array comprises pixels of monolithically grown gain sections each with a different emission center wavelength. As an example, two-dimensional surface-emitting photonic crystal lasers comprising broad gain-bandwidth III-nitride multiple quantum well axial heterostructures were fabricated using a novel top-down nanowire fabrication method. Single-mode lasing was obtained in the blue-violet spectral region with 60 nm of tuning (or 16% of the nominal center wavelength) that was determined purely by the photonic crystal geometry. This approach can be extended to cover the entire visible spectrum.

  1. Configurable silicon photonic crystal waveguides

    NASA Astrophysics Data System (ADS)

    Prorok, Stefan; Petrov, Alexander; Eich, Manfred; Luo, Jingdong; Jen, Alex K.-Y.

    2013-12-01

    In this Letter, we demonstrate that the mode cut off of a photonic crystal waveguide can be trimmed with high accuracy by electron beam bleaching of a chromophore doped polymer cladding. Using this method, configurable waveguides are realized, which allow for spatially resolved changes of the photonic crystal's effective lattice constant as small as 7.6 pm. We show three different examples how to take advantage of configurable photonic crystal waveguides: Shifting of the complete transmission spectrum, definition of cavities with high quality factor, and tuning of existing cavities.

  2. Spatial filtering with photonic crystals

    SciTech Connect

    Maigyte, Lina; Staliunas, Kestutis

    2015-03-15

    Photonic crystals are well known for their celebrated photonic band-gaps—the forbidden frequency ranges, for which the light waves cannot propagate through the structure. The frequency (or chromatic) band-gaps of photonic crystals can be utilized for frequency filtering. In analogy to the chromatic band-gaps and the frequency filtering, the angular band-gaps and the angular (spatial) filtering are also possible in photonic crystals. In this article, we review the recent advances of the spatial filtering using the photonic crystals in different propagation regimes and for different geometries. We review the most evident configuration of filtering in Bragg regime (with the back-reflection—i.e., in the configuration with band-gaps) as well as in Laue regime (with forward deflection—i.e., in the configuration without band-gaps). We explore the spatial filtering in crystals with different symmetries, including axisymmetric crystals; we discuss the role of chirping, i.e., the dependence of the longitudinal period along the structure. We also review the experimental techniques to fabricate the photonic crystals and numerical techniques to explore the spatial filtering. Finally, we discuss several implementations of such filters for intracavity spatial filtering.

  3. Experimental study of photonic crystal triangular lattices

    NASA Astrophysics Data System (ADS)

    Qin, Ruhu; Qin, Bo; Jin, Chongjun

    1999-06-01

    Triangular lattice photonic crystal behaving in the electromagnetic zones constructed from fused silica cylinders in styrofoam is fabricated. The transmission spectra of the photonic crystal with and without defects are measured. On this basis, the defect modes of photonic crystal were studied, and the potential applications of the photonic crystal are discussed.

  4. Two-dimensional metal-glass photonic crystal

    NASA Astrophysics Data System (ADS)

    Pysz, Dariusz; Kujawa, Ireneusz; Stępień, Ryszard; Dominiak, Radosław; Pniewski, Jacek; Szoplik, Tomasz

    2007-04-01

    We present recent achievements in fabricating a two-dimensional (2D) photonic crystal in the form of a bundle of parallel micro- or nanowires embedded in glass matrix. The method is similar to that of sequential thinning used for fabrication of photonic crystal fibers. We discuss technological issues that aim at preservation of regularity of photonic crystal lattice and uniformity of wire diameters. Proper selection of a melting point of metal alloy and the range of temperatures of glass viscosity leads to reduction of regularity losses resulting from sequential processes of drawing. Measured distributions of crystal lattices, wire diameters and shapes of wires are used to simulate photonic band structure of fabricated crystals. This work is directed toward fabrication of a photonic crystal showing the negative refraction in the near infrared and visible spectral range.

  5. Manufacturing method of photonic crystal

    SciTech Connect

    Park, In Sung; Lee, Tae Ho; Ahn, Jin Ho; Biswas, Rana; Constant, Kristen P.; Ho, Kai-Ming; Lee, Jae-Hwang

    2013-01-29

    A manufacturing method of a photonic crystal is provided. In the method, a high-refractive-index material is conformally deposited on an exposed portion of a periodic template composed of a low-refractive-index material by an atomic layer deposition process so that a difference in refractive indices or dielectric constants between the template and adjacent air becomes greater, which makes it possible to form a three-dimensional photonic crystal having a superior photonic bandgap. Herein, the three-dimensional structure may be prepared by a layer-by-layer method.

  6. Diamond based photonic crystal microcavities.

    PubMed

    Tomljenovic-Hanic, S; Steel, M J; de Sterke, C Martijn; Salzman, J

    2006-04-17

    Diamond based technologies offer a material platform for the implementation of qubits for quantum computing. The photonic crystal architecture provides the route for a scalable and controllable implementation of high quality factor (Q) nanocavities, operating in the strong coupling regime for cavity quantum electrodynamics. Here we compute the photonic band structures and quality factors of microcavities in photonic crystal slabs in diamond, and compare the results with those of the more commonly-used silicon platform. We find that, in spite of the lower index contrast, diamond based photonic crystal microcavities can exhibit quality factors of Q=3.0x10(4), sufficient for proof of principle demonstrations in the quantum regime. PMID:19516502

  7. Transient Plasma Photonic Crystals for High-Power Lasers.

    PubMed

    Lehmann, G; Spatschek, K H

    2016-06-01

    A new type of transient photonic crystals for high-power lasers is presented. The crystal is produced by counterpropagating laser beams in plasma. Trapped electrons and electrically forced ions generate a strong density grating. The lifetime of the transient photonic crystal is determined by the ballistic motion of ions. The robustness of the photonic crystal allows one to manipulate high-intensity laser pulses. The scheme of the crystal is analyzed here by 1D Vlasov simulations. Reflection or transmission of high-power laser pulses are predicted by particle-in-cell simulations. It is shown that a transient plasma photonic crystal may act as a tunable mirror for intense laser pulses. Generalizations to 2D and 3D configurations are possible. PMID:27314721

  8. Transient Plasma Photonic Crystals for High-Power Lasers

    NASA Astrophysics Data System (ADS)

    Lehmann, G.; Spatschek, K. H.

    2016-06-01

    A new type of transient photonic crystals for high-power lasers is presented. The crystal is produced by counterpropagating laser beams in plasma. Trapped electrons and electrically forced ions generate a strong density grating. The lifetime of the transient photonic crystal is determined by the ballistic motion of ions. The robustness of the photonic crystal allows one to manipulate high-intensity laser pulses. The scheme of the crystal is analyzed here by 1D Vlasov simulations. Reflection or transmission of high-power laser pulses are predicted by particle-in-cell simulations. It is shown that a transient plasma photonic crystal may act as a tunable mirror for intense laser pulses. Generalizations to 2D and 3D configurations are possible.

  9. Pendellösung effect in photonic crystals

    NASA Astrophysics Data System (ADS)

    Savo, S.; di Gennaro, E.; Miletto, C.; Andreone, A.; Dardano, P.; Moretti, L.; Mocella, V.

    2008-06-01

    At the exit surface of a photonic crystal, the intensity of the diffracted wave can be periodically modulated, showing a maximum in the "positive" (forward diffracted) or in the "negative" (diffracted) direction, depending on the slab thickness. This thickness dependence is a direct result of the so-called Pendellosung phenomenon, consisting of the periodic exchange inside the crystal of the energy between direct and diffracted beams. We report the experimental observation of this effect in the microwave region at about 14 GHz by irradiating 2D photonic crystal slabs of different thickness and detecting the intensity distribution of the electromagnetic field at the exit surface and inside the crystal itself.

  10. The crystal nucleation theory revisited: The case of 2D colloidal crystals

    NASA Astrophysics Data System (ADS)

    González, A. E.; Ixtlilco-Cortés, L.

    2011-03-01

    Most of the theories and studies of crystallization and crystal nucleation consider the boundaries between the crystallites and the fluid as smooth. The crystallites are the small clusters of atoms, molecules and/or particles with the symmetry of the crystal lattice that, with a slight chance of success, would grow to form the crystal grains. In fact, in the classical nucleation theory, the crystallites are assumed to have a spherical shape (circular in 2D). As far are we are aware, there is only one experimental work [1] on colloidal crystals that founds rough surfaces for the crystallites and for the crystal grains. Motivated by this work, we performed large Kinetic Monte Carlo simulations in 2D, that would follow the eventual growing of a few crystallites to form the crystal grains. The used potential has, besides the impenetrable hard core, a soft core followed by a potential well. We found that indeed the crystallites have a fractal boundary, whose value we were able to obtain. See the figure below of a typical isolated crystallite. We were also able to obtain the critical crystallite size, measured by its number of particles, Nc, and not by any critical radius. The boundaries of the crystals above Nc also have a fractal structure but of a lower value, closer to one. Finally, we also obtained the line tension between the crystallites and the surrounding fluid, as function of temperature and particle diameter, as well as the chemical potential difference between these two phases. In the URL: www.fis.unam.mx˜˜agus˜ there are posted two movies that can be downloaded: (1) 2D_crystal_nucleation.mp4, and (2) 2D_crystal_growth.mp4, that illustrate the crystal nucleation and its further growth.

  11. Photonic crystal scene projector development

    NASA Astrophysics Data System (ADS)

    Wilson, J. A.; Burckel, B.; Caulfield, J.; Cogan, S.; Massie, M.; Lamott, R.; Snyder, D.; Rapp, R.

    2010-04-01

    This paper describes results from the Extremely High Temperature Photonic Crystal System Technology (XTEMPS) program. The XTEMPS program is developing projector technology based on photonic crystals capable of high dynamic range, multispectral emission from SWIR to LWIR, and realistic band widths. These Photonics Crystals (PhC) are fabricated from refractory materials to provide high radiance and long device lifetime. Cyan is teamed with Sandia National Laboratories, to develop photonics crystals designed for realistic scene projection systems and Nova sensors to utilize their advanced Read In Integrated Circuit (RIIC). PhC based emitters show improved in-band output power efficiency when compared to broad band "graybody" emitters due to the absence of out-of-band emission. Less electrical power is required to achieve high operating temperature, and the potential for nonequilibrium pumping exists. Both effects boost effective radiance output. Cyan has demonstrated pixel designs compatible with Nova's medium format RIIC, ensuring high apparent output temperatures, modest drive currents, and low operating voltages of less than five volts. Unit cell pixel structures with high radiative efficiency have been demonstrated, and arrays using PhC optimized for up to four spectral bands have been successfully patterned.

  12. Photonic crystal surface-emitting lasers

    SciTech Connect

    Chua, Song Liang; Lu, Ling; Soljacic, Marin

    2015-06-23

    A photonic-crystal surface-emitting laser (PCSEL) includes a gain medium electromagnetically coupled to a photonic crystal whose energy band structure exhibits a Dirac cone of linear dispersion at the center of the photonic crystal's Brillouin zone. This Dirac cone's vertex is called a Dirac point; because it is at the Brillouin zone center, it is called an accidental Dirac point. Tuning the photonic crystal's band structure (e.g., by changing the photonic crystal's dimensions or refractive index) to exhibit an accidental Dirac point increases the photonic crystal's mode spacing by orders of magnitudes and reduces or eliminates the photonic crystal's distributed in-plane feedback. Thus, the photonic crystal can act as a resonator that supports single-mode output from the PCSEL over a larger area than is possible with conventional PCSELs, which have quadratic band edge dispersion. Because output power generally scales with output area, this increase in output area results in higher possible output powers.

  13. Photonic crystals: Theory and device applications

    NASA Astrophysics Data System (ADS)

    Fan, Shanhui

    In this thesis, first-principle frequency-domain and time-domain methods are developed and applied to investigate various properties and device applications of photonic crystals. In Chapter 2, I discuss the two numerical methods used to investigate the properties of photonic crystals. The first solves Maxwell's equations in the frequency domain, while the second solves the equations in the time domain. The frequency-domain method yields the frequency, polarization, symmetry, and field distribution of every eigenmode of the system; the time-domain method allows one to determine the temporal behavior of the modes. In Chapter 3, a new class of three-dimensional photonic crystal structures is introduced that is amenable for fabrication at submicron-length scales. The structures give rise to a 3D photonic bandgap. They consist of a layered structure in which a series of cylindrical air holes are etched at normal incidence. The calculation demonstrates the existence of a gap as large as 14% of the mid-gap frequency using Si, SiO2, and air; and 23% using Si and air. In Chapter 4, the bandstructure and transmission properties of three-dimensional metallodielectric photonic crystals are presented. The metallodielectric crystals are modeled as perfect electrical conducting objects embedded in dielectric media. We investigate the face-centered-cubic (fcc) lattice, and the diamond lattice. Partial gaps are predicted in the fcc lattice, in excellent agreement with recent experiments. Complete gaps are found in a diamond lattice of isolated metal spheres. The gaps appear between the second and third bands, and their sizes can be larger than 60% when the radius of the spheres exceeds 21% of the cubic unit cell size. In Chapter 5, I investigate the properties of resonant modes which arise from the introduction of local defects in two-dimensional (2D) and 3D photonic crystals. The properties of these modes can be controlled by changing the nature and the size of the defects. The

  14. Optical Magnetometer Incorporating Photonic Crystals

    NASA Technical Reports Server (NTRS)

    Kulikov, Igor; Florescu, Lucia

    2007-01-01

    According to a proposal, photonic crystals would be used to greatly increase the sensitivities of optical magnetometers that are already regarded as ultrasensitive. The proposal applies, more specifically, to a state-of-the-art type of quantum coherent magnetometer that exploits the electromagnetically-induced-transparency (EIT) method for determining a small change in a magnetic field indirectly via measurement of the shift, induced by that change, in the hyperfine levels of resonant atoms exposed to the field.

  15. Radiative energy transfer in disordered photonic crystals.

    PubMed

    Erementchouk, M V; Deych, L I; Noh, H; Cao, H; Lisyansky, A A

    2009-04-29

    The difficulty of description of the radiative transfer in disordered photonic crystals arises from the necessity to consider on an equal footing the wave scattering by periodic modulations of the dielectric function and by its random inhomogeneities. We resolve this difficulty by approaching this problem from the standpoint of the general multiple scattering theory in media with an arbitrary regular profile of the dielectric function. We use the general asymptotic solution of the Bethe-Salpeter equation in order to show that for a sufficiently weak disorder the diffusion limit in disordered photonic crystals is presented by incoherent superpositions of the modes of the ideal structure with weights inversely proportional to the respective group velocities. The radiative transfer and the diffusion equations are derived as a relaxation of long scale deviations from this limiting distribution. In particular, it is shown that in general the diffusion is anisotropic unless the crystal has sufficiently rich symmetry, say, the square lattice in 2D or the cubic lattice in 3D. In this case, the diffusion is isotropic and only in this case can the effect of the disorder be characterized by a single mean free path depending on frequency. PMID:21825416

  16. Topological photonic crystal with ideal Weyl points

    NASA Astrophysics Data System (ADS)

    Wang, Luyang; Jian, Shao-Kai; Yao, Hong

    Weyl points in three-dimensional photonic crystals behave as monopoles of Berry flux in momentum space. Here, based on symmetry analysis, we show that a minimal number of symmetry-related Weyl points can be realized in time-reversal invariant photonic crystals. We propose to realize these ``ideal'' Weyl points in modified double-gyroid photonic crystals, which is confirmed by our first-principle photonic band-structure calculations. Photonic crystals with ideal Weyl points are qualitatively advantageous in applications such as angular and frequency selectivity, broadband invisibility cloaking, and broadband 3D-imaging.

  17. Topological photonic crystal with equifrequency Weyl points

    NASA Astrophysics Data System (ADS)

    Wang, Luyang; Jian, Shao-Kai; Yao, Hong

    2016-06-01

    Weyl points in three-dimensional photonic crystals behave as monopoles of Berry flux in momentum space. Here, based on general symmetry analysis, we show that a minimal number of four symmetry-related (consequently equifrequency) Weyl points can be realized in time-reversal invariant photonic crystals. We further propose an experimentally feasible way to modify double-gyroid photonic crystals to realize four equifrequency Weyl points, which is explicitly confirmed by our first-principle photonic band-structure calculations. Remarkably, photonic crystals with equifrequency Weyl points are qualitatively advantageous in applications including angular selectivity, frequency selectivity, invisibility cloaking, and three-dimensional imaging.

  18. Cholesteric liquid crystal photonic crystal lasers and photonic devices

    NASA Astrophysics Data System (ADS)

    Zhou, Ying

    This dissertation discusses cholesteric liquid crystals (CLCs) and polymers based photonic devices including one-dimensional (1D) photonic crystal lasers and broadband circular polarizers. CLCs showing unique self-organized chiral structures have been widely used in bistable displays, flexible displays, and reflectors. However, the photonic band gap they exhibit opens a new way for generating laser light at the photonic band edge (PBE) or inside the band gap. When doped with an emissive laser dye, cholesteric liquid crystals provide distributed feedback so that mirrorless lasing is hence possible. Due to the limited surface anchoring, the thickness of gain medium and feedback length is tens of micrometers. Therefore lasing efficiency is quite limited and laser beam is highly divergent. To meet the challenges, we demonstrated several new methods to enhance the laser emission while reducing the beam divergence from a cholesteric liquid crystal laser. Enhanced laser emission is demonstrated by incorporating a single external CLC reflector as a polarization conserved reflector. Because the distributed feedback from the active layer is polarization selective, a CLC reflector preserves the original polarization of the reflected light and a further stimulated amplification ensues. As a result of virtually doubled feedback length, the output is dramatically enhanced in the same circular polarization state. Meanwhile, the laser beam divergence is dramatically reduced due to the increased cavity length from micrometer to millimeter scale. Enhanced laser emission is also demonstrated by the in-cell metallic reflector because the active layer is pumped twice. Unlike a CLC reflector, the output from a mirror-reflected CLC laser is linearly polarized as a result of coherent superposition of two orthogonal circular polarization states. The output linear polarization direction can be well controlled and fine tuned by varying the operating temperature and cell gap. Enhanced laser

  19. Photonic crystal structures for efficent localization or extraction of light

    NASA Astrophysics Data System (ADS)

    Vuckovic, Jelena

    Three-dimensional (3D) photonic crystals offer the opportunity of light manipulation in all directions in space, but they are very difficult to fabricate. On the other hand, planar photonic crystals are much simpler to make, but they exhibit only a "quasi-3D" confinement, resulting from the combined action of 2D photonic crystal and internal reflection. The imperfect confinement in the third dimension produces some unwanted out-of-plane loss, which is usually a limiting factor in performance of these structures. This thesis proposes how to fully take advantage of the relatively simple fabrication of planar photonic crystals, by addressing a problem of loss-reduction. One of the greatest challenges in photonics is a construction of optical microcavities with small mode volumes and large quality factors, for efficient localization of light. Beside standard applications of these structures (such as lasers or filters), they can potentially be used for cavity QED experiments, or as building blocks for quantum networks. This work also presents the design and fabrication of optical microcavities based on planar photonic crystals, with mode volumes of the order of one half of cubic wavelength of light (measured in material) and with Q factors predicted to be even larger than 10 4. In addition to photonic crystals fabricated in semiconductors, we also address interesting properties of metallic photonic crystals and present our theoretical and experimental work on using them to improve the output of light emissive devices. Feature sizes of structures presented here are below those achievable by photolithography. Therefore, a high resolution lithography is necessary for their fabrication. The presently used e-beam writing techniques suffer from limitations in speed and wafer throughput, and they represent a huge obstacle to commercialization of photonic crystals. Our preliminary work on electron beam projection lithography, the technique that could provide us with the speed

  20. Flow-induced protein crystallization: Macroscopic effects on 2D crystals

    NASA Astrophysics Data System (ADS)

    Young, James; Posada, David; Hirsa, Amir; Lopez, Juan

    2012-11-01

    Proteins must first be crystallized before their molecular structure can be studied in detail. However, crystallizing protein is a challenging task which is often met with limited success. Although 2-D protein crystals at the air/water interface are usually obtained under quiescent conditions, it was recently shown that crystallization can be enhanced by a shearing flow. Here we examine the relationship between Reynolds number and the crystal growth process using the deep-channel surface viscometer geometry. It consists of an annular region bounded by stationary inner and outer cylinders and driven by a constant rotation of the floor. The interfacial velocity measurements are compared to Navier-Stokes computations with the Boussinesq-Scriven surface model. The interfacial film is lifted onto a solid substrate, and the protein crystals are observed via optical and atomic force microscopy. For a particular protein surface concentration, a Reynolds number threshold has been identified for flow-induced crystallization. This flow geometry also allows for the determination of the surface shear viscosity, which provides a quantitative measure of the mesoscale interactions associated with protein crystallization.

  1. Photonic crystals--a step towards integrated circuits for photonics.

    PubMed

    Thylén, Lars; Qiu, Min; Anand, Srinivasan

    2004-09-20

    The field of photonic crystals has, over the past few years, received dramatically increased attention. Photonic crystals are artificially engineered structures that exhibit a periodic variation in one, two, or three dimensions of the dielectric constant, with a period of the order of the pertinent light wavelength. Such structures in three dimensions should exhibit properties similar to solid-state electronic crystals, such as bandgaps, in other words wavelength regions where light cannot propagate in any direction. By introducing defects into the periodic arrangement, the photonic crystals exhibit properties analogous to those of solid-state crystals. The basic feature of a photonic bandgap was indeed experimentally demonstrated in the beginning of the 1990s, and sparked a large interest in, and in many ways revitalized, photonics research. There are several reasons for this attention. One is that photonic crystals, in their own right, offer a proliferation of challenging research tasks, involving a multitude of disciplines, such as electromagnetic theory, nanofabrication, semi-conductor technology, materials science, biotechnology, to name a few. Another reason is given by the somewhat more down-to-earth expectations that photonics crystals will create unique opportunities for novel devices and applications, and contribute to solving some of the issues that have plagued photonics such as large physical sizes, comparatively low functionality, and high costs. Herein, we will treat some basics of photonic crystal structures and discuss the state-of-the-art in fabrication as well give some examples of devices with unique properties, due to the use of photonic crystals. We will also point out some of the problems that still remain to be solved, and give a view on where photonic crystals currently stand. PMID:15499844

  2. Frozen multipartite entanglement in photonic crystals

    NASA Astrophysics Data System (ADS)

    Wu, Wei; Xu, Jing-Bo

    2016-06-01

    We investigate the multipartite entanglement dynamics of a many-body system consisting of N identical two-level atoms locally embedded in their own band-gap photonic crystals. It is shown that the tripartite entanglement of this photonic-crystal system can be frozen in a stationary state. We also find that a double-sudden-change phenomenon of four-partite entanglement occurs in this photonic-crystal system during the decoherence process under certain suitable conditions.

  3. Novel photonic crystals: incorporation of nano-CdS into the natural photonic crystals within peacock feathers.

    PubMed

    Han, Jie; Su, Huilan; Song, Fang; Gu, Jiajun; Di, Zhang; Jiang, Limin

    2009-03-01

    In this investigation, the natural 2D photonic crystals (PhCs) within peacock feathers are applied to incorporate CdS nanocrystallites. Peacock feathers are activated by ethylenediaminetetraacetic/dimethylformamide suspension to increase the reactive sites on the keratin component, on which CdS nanoparticles (nano-CdS) are in situ formed in succession and serve as the "seeds" to direct further incorporation during the following solvothermal procedure. Thus, homogeneous nano-CdS are loaded both on the feathers' surface layer and inside the 2D PhCs. The obtained nano-CdS/peacock feathers hybrids are novel photonic crystals whose photonic stop bands are markedly different from that of the natural PhCs within original peacock feathers, as observed by the reflection spectra. PMID:19437723

  4. Three-dimensional control of light in a two-dimensional photonic crystal slab

    SciTech Connect

    CHOW,KAI-CHEUNG; LIN,SHAWN-YU; JOHNSON,S.G.; VILLENEUVE,P.R.; JOANNOPOULOS,J.D.; WENDT,JOEL R.; VAWTER,GREGORY A.; ZUBRZYCKI,WALTER J.; HOU,HONG Q.; ALLERMAN,ANDREW A.

    2000-02-15

    A two-dimensional (2D) photonic crystal is an attractive alternative and complimentary to its 3D counterpart, due to fabrication simplicity. A 2D crystal, however, confines light only in the 2D plane, but not in the third direction, the z-direction. Earlier experiments show that such a 2D system can exist, providing that the boundary effect in z-direction is negligible and that light is collimated in the 2D plane. Nonetheless, the usefulness of such 2D crystals is limited because they are incapable of guiding light in z-direction, which leads to diffraction loss. This drawback presents a major obstacle for realizing low-loss 2D crystal waveguides, bends and thresholdless lasers. A recent theoretical calculation, though, suggests a novel way to eliminate such a loss with a 2D photonic crystal slab. The concept of a lightcone is introduced as a criterion for fully guiding and controlling light. Although the leaky modes of a crystal slab have been studied, there have until now no experimental reports on probing its guided modes and band gaps. In this paper, a waveguide-coupled 2D photonic crystal slab is successfully fabricated from a GaAs/Al{sub x}O{sub y} material system and its intrinsic transmission properties are studied. The crystal slab is shown to have a strong 2D band gap at {lambda} {approximately} 1.5 {micro}m. Light attenuates as much as {approximately}5dB per period in the gap, the strongest ever reported for any 2D photonic crystal in optical {lambda}. More importantly, for the first time, the crystal slab is shown to be capable of controlling light fully in all three-dimensions. The lightcone criterion is also experimentally confirmed.

  5. Tunable liquid crystal photonic devices

    NASA Astrophysics Data System (ADS)

    Fan, Yun-Hsing

    2005-07-01

    Liquid crystal (LC)-based adaptive optics are important for information processing, optical interconnections, photonics, integrated optics, and optical communications due to their tunable optical properties. In this dissertation, we describe novel liquid crystal photonic devices. In Chap. 3, we demonstrate a novel electrically tunable-efficiency Fresnel lens which is devised for the first time using nanoscale PDLC. The tunable Fresnel lens is very desirable to eliminate the need of external spatial light modulator. The nanoscale LC devices are polarization independent and exhibit a fast response time. Because of the small droplet sizes, the operating voltage is higher than 100 Vrms. To lower the driving voltage, in Chap. 2 and Chap. 3, we have investigated tunable Fresnel lens using polymer-network liquid crystal (PNLC) and phase-separated composite film (PSCOF). The operating voltage is below 12 Vrms. The PNLC and PSCOF devices are polarization dependent. To overcome this shortcoming, stacking two cells with orthogonal alignment directions is a possibility. Using PNLC, we also demonstrated LC blazed grating. The diffraction efficiency of these devices is continuously controlled by the electric field. We also develop a system with continuously tunable focal length. A conventional mechanical zooming system is bulky and power hungry. In Chap. 4, we developed an electrically tunable-focus flat LC spherical lens and microlens array. A huge tunable range from 0.6 m to infinity is achieved by the applied voltage. In Chap. 5, we describe a LC microlens array whose focal length can be switched from positive to negative by the applied voltage. The fast response time feature of our LC microlens array will be very helpful in developing 3-D animated images. In Chap. 6, we demonstrate polymer network liquid crystals for switchable polarizers and optical shutters. The use of dual-frequency liquid crystal and special driving scheme leads to a sub-millisecond response time. In

  6. Topologically robust transport of entangled photons in a 2D photonic system.

    PubMed

    Mittal, Sunil; Orre, Venkata Vikram; Hafezi, Mohammad

    2016-07-11

    We theoretically study the transport of time-bin entangled photon pairs in a two-dimensional topological photonic system of coupled ring resonators. This system implements the integer quantum Hall model using a synthetic gauge field and exhibits topologically robust edge states. We show that the transport through edge states preserves temporal correlations of entangled photons whereas bulk transport does not preserve these correlations and can lead to significant unwanted temporal bunching or anti-bunching of photons. We study the effect of disorder on the quantum transport properties; while the edge transport remains robust, bulk transport is very susceptible, and in the limit of strong disorder, bulk states become localized. We show that this localization is manifested as an enhanced bunching/anti-bunching of photons. This topologically robust transport of correlations through edge states could enable robust on-chip quantum communication channels and delay lines for information encoded in temporal correlations of photons. PMID:27410836

  7. Laser-induced defect insertion in DNA-linked 2D colloidal crystal array

    NASA Astrophysics Data System (ADS)

    Geiss, Erik; Kim, Sejong; Marcus, Harris L.; Papadimitrakopoulos, Fotios

    2009-02-01

    Insertion of vacancies at predetermined sites within the lattice of colloidal crystals is a prerequisite in order to realize high-quality, opaline-based photonic devices. In this contribution, we demonstrate a novel methodology to afford controlled insertion of vacancies within two-dimensional (2D) opaline arrays. These 2D opaline arrays have been substrate-anchored with the help of DNA hybridization. This provides a heat-sensitive ‘adhesive’ between substrate and microspheres within a surrounding aqueous medium that enables tuning the hybridization strength of DNA linker as well as a mechanism to facilitate the removal of unbound microspheres. Focusing a laser beam onto the substrate/microsphere interface induces a localized heating event that detaches the irradiated microspheres, leaving behind vacancies. By repeating this process, line vacancies were successfully obtained. The effects of salt concentration, laser power, light-absorbing dyes, DNA length and refractive-index mismatch were investigated and found to correlate with heat-induced microsphere release.

  8. Energy transduction in surface photonic crystals

    NASA Astrophysics Data System (ADS)

    Yang, Fuchyi

    2011-12-01

    This dissertation is a detailed investigation of the fabrication, design, characterization, and understanding of physical principles of energy transduction in surface photonic crystals which are engineered for various applications. One-dimensional photonic crystals are engineered as optically tunable reflectance filters for lambda = 632.8 nm wavelength light by incorporating azobenzene liquid crystal dye molecules into the photonic crystal structure. Optical energy is transduced to accomplish mechanical work by exciting the dye molecules into different physical configurations, leading to changes in the optical properties of the dye molecules, namely their refractive index. This mechanism is used to tune the reflection resonance of the photonic crystal filter. The spectral and temporal optical tuning response of the photonic crystal filter due to excitation light at lambda = 532 nm is characterized. Modulation of the transmitted and reflected lambda = 632.8 nm light is achieved at microsecond time response. Two-dimensional photonic crystals are also investigated as reflectance filters for lambda = 532 nm wavelength light. Both optically tunable and static reflectance filters are studied. Again, azobenzene liquid crystal molecules are incorporated into the photonic crystal to achieve optical tuning of the reflectance wavelength. In this case, the lambda = 532 nm wavelength light is used for self-modulation. That is, the light serves both to optically tune the photonic crystal filter as well as to modulate its own reflection efficiency through the photonic crystal filter. Moreover, stacking of multiple photonic crystals into a single filter is studied for both static and optically tunable photonic crystal filters. It is shown that this approach improves the performance of the photonic crystal reflectance filter by increasing its optical density and its angular tolerance at the reflection wavelength of lambda = 532 nm. Additionally, surface photonic crystals are

  9. Photonic crystal scintillators and methods of manufacture

    SciTech Connect

    Torres, Ricardo D.; Sexton, Lindsay T.; Fuentes, Roderick E.; Cortes-Concepcion, Jose

    2015-08-11

    Photonic crystal scintillators and their methods of manufacture are provided. Exemplary methods of manufacture include using a highly-ordered porous anodic alumina membrane as a pattern transfer mask for either the etching of underlying material or for the deposition of additional material onto the surface of a scintillator. Exemplary detectors utilizing such photonic crystal scintillators are also provided.

  10. Photonic crystal technology for terahertz system integration

    NASA Astrophysics Data System (ADS)

    Fujita, Masayuki; Nagatsuma, Tadao

    2016-04-01

    Developing terahertz integration technology is essential for practical use of terahertz electromagnetic waves (0.1-10 THz) in various applications including broadband wireless communication, spectroscopic sensing, and nondestructive imaging. In this paper, we present our recent challenges towards terahertz system integration based on photonic crystal technology such as the development of terahertz transceivers. We use photonic-crystal slabs consisting of a twodimensional lattice of air holes formed in a silicon slab to develop low loss compact terahertz components in planar structures. The demonstration of ultralow loss (< 0.1 dB/cm) waveguides and integrated transceiver devices in the 0.3 THz band shows the potential for the application of photonic crystals to terahertz integration technology. Improving the coupling efficiency between the photonic crystal waveguide and resonant tunneling diode is important to take full advantage of the ultralow loss photonic crystal waveguides.

  11. Liquid crystal orientation control in photonic liquid crystal fibers

    NASA Astrophysics Data System (ADS)

    Chychlowski, M. S.; Nowinowski-Kruszelnicki, E.; Woliński, T. R.

    2011-05-01

    Similarly to liquid crystal displays technology in photonic liquid crystal fibers (PLCFs) a molecular orientation control is a crucial issue that influences proper operation of PLCF-based devices. The paper presents two distinct configurations: planar and radial escaped orientation of the LC molecules inside capillaries as well as methods of their application to photonic liquid crystal fibers. Possibilities of LC orientation control influence both: attenuation and transmitting spectra of the PLCF The orienting method is based on creation of an additional orienting layer on the inner surface of the capillary or air hole of the photonic liquid crystal fiber. Aligning materials used in the experiment are commercially available polyimides SE1211 and SE130 which induce liquid crystal homeotropic and planar anchoring conditions. The orienting layer increase an order parameter of the liquid crystal improving propagation properties and stability of photonic liquid crystal fiber-based devices.

  12. Butterfly wing color: A photonic crystal demonstration

    NASA Astrophysics Data System (ADS)

    Proietti Zaccaria, Remo

    2016-01-01

    We have theoretically modeled the optical behavior of a natural occurring photonic crystal, as defined by the geometrical characteristics of the Teinopalpus Imperialis butterfly. In particular, following a genetic algorithm approach, we demonstrate how its wings follow a triclinic crystal geometry with a tetrahedron unit base. By performing both photonic band analysis and transmission/reflection simulations, we are able to explain the characteristic colors emerging by the butterfly wings, thus confirming their crystal form.

  13. Large-area high-quality 2D ultrathin Mo2C superconducting crystals

    NASA Astrophysics Data System (ADS)

    Xu, Chuan; Wang, Libin; Liu, Zhibo; Chen, Long; Guo, Jingkun; Kang, Ning; Ma, Xiu-Liang; Cheng, Hui-Ming; Ren, Wencai

    2015-11-01

    Transition metal carbides (TMCs) are a large family of materials with many intriguing properties and applications, and high-quality 2D TMCs are essential for investigating new physics and properties in the 2D limit. However, the 2D TMCs obtained so far are chemically functionalized, defective nanosheets having maximum lateral dimensions of ~10 μm. Here we report the fabrication of large-area high-quality 2D ultrathin α-Mo2C crystals by chemical vapour deposition (CVD). The crystals are a few nanometres thick, over 100 μm in size, and very stable under ambient conditions. They show 2D characteristics of superconducting transitions that are consistent with Berezinskii-Kosterlitz-Thouless behaviour and show strong anisotropy with magnetic field orientation; moreover, the superconductivity is also strongly dependent on the crystal thickness. Our versatile CVD process allows the fabrication of other high-quality 2D TMC crystals, such as ultrathin WC and TaC crystals, which further expand the large family of 2D materials.

  14. Large-area high-quality 2D ultrathin Mo2C superconducting crystals.

    PubMed

    Xu, Chuan; Wang, Libin; Liu, Zhibo; Chen, Long; Guo, Jingkun; Kang, Ning; Ma, Xiu-Liang; Cheng, Hui-Ming; Ren, Wencai

    2015-11-01

    Transition metal carbides (TMCs) are a large family of materials with many intriguing properties and applications, and high-quality 2D TMCs are essential for investigating new physics and properties in the 2D limit. However, the 2D TMCs obtained so far are chemically functionalized, defective nanosheets having maximum lateral dimensions of ∼10 μm. Here we report the fabrication of large-area high-quality 2D ultrathin α-Mo2C crystals by chemical vapour deposition (CVD). The crystals are a few nanometres thick, over 100 μm in size, and very stable under ambient conditions. They show 2D characteristics of superconducting transitions that are consistent with Berezinskii-Kosterlitz-Thouless behaviour and show strong anisotropy with magnetic field orientation; moreover, the superconductivity is also strongly dependent on the crystal thickness. Our versatile CVD process allows the fabrication of other high-quality 2D TMC crystals, such as ultrathin WC and TaC crystals, which further expand the large family of 2D materials. PMID:26280223

  15. Photonic crystal microcavity lasers and laser arrays

    NASA Astrophysics Data System (ADS)

    Cao, Jiang-Rong

    As a state-of-the-art technology, photonic crystal microcavity lasers have great potentials to resolve many semiconductor laser performance challenges, owing to their compact size, high spontaneous emission factor, and inherent advantages in dimension scalability. This thesis describes efficient numerical analyzing methods for multimode photonic crystal microcavities, including a parallel computing three-dimensional finite-difference time-domain method combined with Pade interpolation, point group projection, and vectorial Green's function method. With the help of these analyzing tools, various experimental photonic crystal microcavity devices fabricated in InGaAsP/InP based materials were studies. Room temperature optical pumped InGaAsP suspended membrane photonic crystal microcavity lasers were demonstrated. Their lithographical fine-tuning, above room temperature operations, mode identifications and polarizations were demonstrated. Room temperature continuous wave (CW) optically pumped photonic crystal microcavity lasers at diameter less than 3.2 mum were demonstrated with crystalline alpha-Al 2O3 (sapphire) as a cladding layer to the InGaAsP membrane. The far-field radiation profiles from these microcavity lasers were measured and compared with our numerical modeling predictions. Two electrical injection scenes for photonic crystal microcavity lasers were introduced, together with some preliminary results including the demonstrations of optically pumped lasing of highly doped cavities and cavities with an electrical conduction post underneath. Electrically excited photonic crystal microcavity light emitting diodes (LEDs) were also experimentally demonstrated.

  16. Etched distributed Bragg reflectors as three-dimensional photonic crystals: photonic bands and density of states.

    PubMed

    Pavarini, E; Andreani, L C

    2002-09-01

    The photonic band dispersion and density of states (DOS) are calculated for the three-dimensional (3D) hexagonal structure corresponding to a distributed Bragg reflector patterned with a 2D triangular lattice of circular holes. Results for the Si/SiO(2) and GaAs/Al(x)Ga(1-x)As systems determine the optimal parameters for which a gap in the 2D plane occurs and overlaps the 1D gap of the multilayer. The DOS is considerably reduced in correspondence with the overlap of 2D and 1D gaps. Also, the local density of states (i.e., the DOS weighted with the squared electric field at a given point) has strong variations depending on the position. Both results imply substantial changes of spontaneous emission rates and patterns for a local emitter embedded in the structure and make this system attractive for the fabrication of a 3D photonic crystal with controlled radiative properties. PMID:12366275

  17. Guided-wave liquid-crystal photonics.

    PubMed

    Zografopoulos, D C; Asquini, R; Kriezis, E E; d'Alessandro, A; Beccherelli, R

    2012-10-01

    In this paper we review the state of the art in the field of liquid-crystal tunable guided-wave photonic devices, a unique type of fill-once, molecular-level actuated, optofluidic systems. These have recently attracted significant research interest as potential candidates for low-cost, highly functional photonic elements. We cover a full range of structures, which span from micromachined liquid-crystal on silicon devices to periodic structures and liquid-crystal infiltrated photonic crystal fibers, with focus on key-applications for photonics. Various approaches on the control of the LC molecular orientation are assessed, including electro-, thermo- and all-optical switching. Special attention is paid to practical issues regarding liquid-crystal infiltration, molecular alignment and actuation, low-power operation, as well as their integrability in chip-scale or fiber-based devices. PMID:22842818

  18. Novel photonic crystal cavities and related structures.

    SciTech Connect

    Luk, Ting Shan

    2007-11-01

    The key accomplishment of this project is to achieve a much more in-depth understanding of the thermal emission physics of metallic photonic crystal through theoretical modeling and experimental measurements. An improved transfer matrix technique was developed to enable incorporation of complex dielectric function. Together with microscopic theory describing emitter radiative and non-radiative relaxation dynamics, a non-equilibrium thermal emission model is developed. Finally, experimental methodology was developed to measure absolute emissivity of photonic crystal at high temperatures with accuracy of +/-2%. Accurate emissivity measurements allow us to validate the procedure to treat the effect of the photonic crystal substrate.

  19. Photonic crystal ring resonator based optical filters for photonic integrated circuits

    SciTech Connect

    Robinson, S.

    2014-10-15

    In this paper, a two Dimensional (2D) Photonic Crystal Ring Resonator (PCRR) based optical Filters namely Add Drop Filter, Bandpass Filter, and Bandstop Filter are designed for Photonic Integrated Circuits (PICs). The normalized output response of the filters is obtained using 2D Finite Difference Time Domain (FDTD) method and the band diagram of periodic and non-periodic structure is attained by Plane Wave Expansion (PWE) method. The size of the device is minimized from a scale of few tens of millimeters to the order of micrometers. The overall size of the filters is around 11.4 μm × 11.4 μm which is highly suitable of photonic integrated circuits.

  20. Analysis of photon recycling using metallic photonic crystal

    NASA Astrophysics Data System (ADS)

    Kim, Yong-Sung; Lin, Shawn-Yu; Chang, Allan S. P.; Lee, Jae-Hwang; Ho, Kai-Ming

    2007-09-01

    We investigate a photon recycling scheme using two-dimensional metallic photonic crystals made of silver to improve the energy efficiency of an incandescent light source. A theoretical framework is presented to analyze the resultant photon-recycled lighting system. Calculation results show that the system can reach a maximum luminous efficiency of 125 lm/W, which is 8 times higher than that of a bare blackbody radiation at 2800 K. The color temperature of the system is calculated to be around 3500 K or below, while the color rendering index is between 68 and 90. These results suggest that a photon-recycled incandescent light source using metallic photonic crystals can be a viable alternative future lighting solution.

  1. Multifunctional Glassy Liquid Crystal for Photonics

    SciTech Connect

    Chen,S.H.

    2004-11-05

    As an emerging class of photonic materials, morphologically stable glassy liquid crystals, were developed following a versatile molecular design approach. Glassy cholesteric liquid crystals with elevated phase-transition temperatures and capability for selective-wavelength reflection and circular polarization were synthesized via determinstic synthesis strategies. Potential applications of glassy cholesteric liquid crystals include high-performance polarizers, optical notch filters and reflectors, and circularly polarized photoluminescence. A glassy nematic liquid crystal comprising a dithienylethene core was also synthesized for the demonstration of nondestructive rewritable optical memory and photonic switching in the sollid state.

  2. Coupled External Cavity Photonic Crystal Enhanced Fluorescence

    PubMed Central

    Pokhriyal, Anusha; Lu, Meng; Ge, Chun; Cunningham, Brian T.

    2016-01-01

    We report a fundamentally new approach to enhance fluorescence in which surface adsorbed fluorophore-tagged biomolecules are excited on a photonic crystal surface that functions as a narrow bandwidth and tunable mirror of an external cavity laser. This scheme leads to ~10× increase in the electromagnetic enhancement factor compared to ordinary photonic crystal enhanced fluorescence. In our experiments, the cavity automatically tunes its lasing wavelength to the resonance wavelength of the photonic crystal, ensuring optimal on-resonance coupling even in the presence of variable device parameters and variations in the density of surface-adsorbed capture molecules. We achieve ~105× improvement in the limit of detection of a fluorophore-tagged protein compared to its detection on an unpatterned glass substrate. The enhanced fluorescence signal and easy optical alignment make cavity-coupled photonic crystals a viable approach for further reducing detection limits of optically-excited light emitters that are used in biological assays. PMID:23129575

  3. Wafer-scale plasmonic and photonic crystal sensors

    NASA Astrophysics Data System (ADS)

    George, M. C.; Liu, J.-N.; Farhang, A.; Williamson, B.; Black, M.; Wangensteen, T.; Fraser, J.; Petrova, R.; Cunningham, B. T.

    2015-08-01

    200 mm diameter wafer-scale fabrication, metrology, and optical modeling results are reviewed for surface plasmon resonance (SPR) sensors based on 2-D metallic nano-dome and nano-hole arrays (NHA's) as well as 1-D photonic crystal sensors based on a leaky-waveguide mode resonance effect, with potential applications in label free sensing, surface enhanced Raman spectroscopy (SERS), and surface-enhanced fluorescence spectroscopy (SEFS). Potential markets include micro-arrays for medical diagnostics, forensic testing, environmental monitoring, and food safety. 1-D and 2-D nanostructures were fabricated on glass, fused silica, and silicon wafers using optical lithography and semiconductor processing techniques. Wafer-scale optical metrology results are compared to FDTD modeling and presented along with application-based performance results, including label-free plasmonic and photonic crystal sensing of both surface binding kinetics and bulk refractive index changes. In addition, SEFS and SERS results are presented for 1-D photonic crystal and 2-D metallic nano-array structures. Normal incidence transmittance results for a 550 nm pitch NHA showed good bulk refractive index sensitivity, however an intensity-based design with 665 nm pitch was chosen for use as a compact, label-free sensor at both 650 and 632.8 nm wavelengths. The optimized NHA sensor gives an SPR shift of about 480 nm per refractive index unit when detecting a series of 0-40% glucose solutions, but according to modeling shows about 10 times greater surface sensitivity when operating at 532 nm. Narrow-band photonic crystal resonance sensors showed quality factors over 200, with reasonable wafer-uniformity in terms of both resonance position and peak height.

  4. Simulation of the flow and mass transfer for KDP crystals undergoing 2D translation during growth

    NASA Astrophysics Data System (ADS)

    Zhou, Chuan; Li, Mingwei; Hu, Zhitao; Yin, Huawei; Wang, Bangguo; Cui, Qidong

    2016-09-01

    In this study, a novel motion mode for crystals during growth, i.e., 2D translation, is proposed. Numerical simulations of flow and mass transfer are conducted for the growth of large-scale potassium dihydrogen phosphate (KDP) crystals subjected to the new motion mode. Surface supersaturation and shear stress are obtained as functions of the translational velocity, distance, size, orientation of crystals. The dependence of these two parameters on the flow fields around the crystals is also discussed. The thicknesses of the solute boundary layer varied with translational velocity are described. The characteristics of solution flow and surface supersaturation distribution are summarized, where it suggests that the morphological stability of a crystal surface can be enhanced if the proposed 2D translation is applied to crystal growth.

  5. Photonic crystal: energy-related applications

    SciTech Connect

    Ye, Zhuo; Park, Joong-Mok; Constant, Kristen; Kim, Tae-Geun; Ho, Kai-Ming

    2012-06-08

    We review recent work on photonic-crystal fabrication using soft-lithography techniques. We consider applications of the resulting structures in energy-related areas such as lighting and solar-energy harvesting. In general, our aim is to introduce the reader to the concepts of photonic crystals, describe their history, development, and fabrication techniques and discuss a selection of energy-related applications.

  6. Photonic Crystal Laser-Driven Accelerator Structures

    SciTech Connect

    Cowan, B.; /SLAC

    2005-09-19

    We discuss simulated photonic crystal structure designs for laser-driven particle acceleration, focusing on three-dimensional planar structures based on the so-called ''woodpile'' lattice. We demonstrate guiding of a speed-of-light accelerating mode by a defect in the photonic crystal lattice and discuss the properties of this mode. We also discuss particle beam dynamics in the structure, presenting a novel method for focusing the beam. In addition we describe some potential coupling methods for the structure.

  7. Photonic crystal waveguide created by selective infiltration

    NASA Astrophysics Data System (ADS)

    Casas Bedoya, A.; Domachuk, P.; Grillet, C.; Monat, C.; Mägi, E. C.; Li, E.; Eggleton, B. J.

    2012-06-01

    The marriage of photonics and microfluidics ("optofluidics") uses the inherent mobility of fluids to reversibly tune photonic structures beyond traditional fabrication methods by infiltrating voids in said structures. Photonic crystals (PhCs) strongly control light on the wavelength scale and are well suited to optofluidic tuning because their periodic airhole microstructure is a natural candidate for housing liquids. The infiltration of a single row of holes in the PhC matrix modifies the effective refractive index allowing optical modes to be guided by the PhC bandgap. In this work we present the first experimental demonstration of a reconfigurable single mode W1 photonic crystal defect waveguide created by selective liquid infiltration. We modified a hexagonal silicon planar photonic crystal membrane by selectively filling a single row of air holes with ~300nm resolution, using high refractive index ionic liquid. The modification creates optical confinement in the infiltrated region and allows propagation of a single optical waveguide mode. We describe the challenges arising from the infiltration process and the liquid/solid surface interaction in the photonic crystal. We include a detailed comparison between analytic and numerical modeling and experimental results, and introduce a new approach to create an offset photonic crystal cavity by varying the nature of the selective infiltration process.

  8. Crystal structure of the cowpox virus-encoded NKG2D ligand OMCP.

    PubMed

    Lazear, Eric; Peterson, Lance W; Nelson, Chris A; Fremont, Daved H

    2013-01-01

    The NKG2D receptor is expressed on the surface of NK, T, and macrophage lineage cells and plays an important role in antiviral and antitumor immunity. To evade NKG2D recognition, herpesviruses block the expression of NKG2D ligands on the surface of infected cells using a diverse repertoire of sabotage methods. Cowpox and monkeypox viruses have taken an alternate approach by encoding a soluble NKG2D ligand, the orthopoxvirus major histocompatibility complex (MHC) class I-like protein (OMCP), which can block NKG2D-mediated cytotoxicity. This approach has the advantage of targeting a single conserved receptor instead of numerous host ligands that exhibit significant sequence diversity. Here, we show that OMCP binds the NKG2D homodimer as a monomer and competitively blocks host ligand engagement. We have also determined the 2.25-Å-resolution crystal structure of OMCP from the cowpox virus Brighton Red strain, revealing a truncated MHC class I-like platform domain consisting of a beta sheet flanked with two antiparallel alpha helices. OMCP is generally similar in structure to known host NKG2D ligands but has notable variations in regions typically used to engage NKG2D. Additionally, the determinants responsible for the 14-fold-higher affinity of OMCP for human than for murine NKG2D were mapped to a single loop in the NKG2D ligand-binding pocket. PMID:23115291

  9. Optical trapping apparatus, methods and applications using photonic crystal resonators

    SciTech Connect

    Erickson, David; Chen, Yih-Fan

    2015-06-16

    A plurality of photonic crystal resonator optical trapping apparatuses and a plurality optical trapping methods using the plurality of photonic crystal resonator optical trapping apparatuses include located and formed over a substrate a photonic waveguide that is coupled (i.e., either separately coupled or integrally coupled) with a photonic crystal resonator. In a particular embodiment, the photonic waveguide and the photonic crystal resonator comprise a monocrystalline silicon (or other) photonic material absent any chemical functionalization. In another particular embodiment, the photonic waveguide and the photonic crystal resonator comprise a silicon nitride material which when actuating the photonic crystal resonator optical trapping apparatus with a 1064 nanometer resonant photonic radiation wavelength (or other resonant photonic radiation wavelength in a range from about 700 to about 1200 nanometers) provides no appreciable heating of an aqueous sample fluid that is analyzed by the photonic crystal resonator optical trapping apparatus.

  10. Optical mirage in graded photonic crystals

    NASA Astrophysics Data System (ADS)

    Centeno, Emmanuel; Cassagne, David; Albert, Jean Paul

    2006-04-01

    We present the concept of graded photonic crystals (GPC) and show its ability to enhance the control of light propagation. It is shown that gradual modifications of photonic crystal parameters are able to curve the path of light. This light bending which depends on the wavelength and on the incident angle is examined through parametric studies of the iso-frequency curves. We demonstrate that photonic mirages originate from the same physical principles as the usual atmospheric mirages. Two optical components based on two-dimensional GPCs presenting a super bending effect and a large beam shifting are presented.

  11. Controlling spontaneous emission in bioreplica photonic crystals

    NASA Astrophysics Data System (ADS)

    Jorgensen, Matthew R.; Butler, Elizabeth S.; Bartl, Michael H.

    2012-04-01

    Sophisticated methods have been created by nature to produce structure-based colors as a way to address the need of a wide variety of organisms. This pallet of available structures presents a unique opportunity for the investigation of new photonic crystal designs. Low-temperature sol-gel biotemplating methods were used to transform a single biotemplate into a variety of inorganic oxide structures. The density of optical states was calculated for a diamond-based natural photonic crystal, as well as several structures templated from it. Calculations were experimentally probed by spontaneous emission studies using time correlated single photon counting measurements.

  12. The inspection of anisotropic single-crystal components using a 2-D ultrasonic array.

    PubMed

    Lane, Christopher J L; Dunhill, A K; Drinkwater, Bruce W; Wilcox, Paul D

    2010-12-01

    Single-crystal metal alloys are used extensively in the manufacture of jet engine components for their excellent mechanical properties at elevated temperatures. The inspection of these components using 2-D ultrasonic arrays potentially allows the detection of subsurface defects in threedimensions from one inspection location. Such methods are not currently suitable for the inspection of single-crystal components because the high elastic anisotropy of single-crystal materials causes directional variation in ultrasonic waves. In this paper, a model of wave propagation in anisotropic material is used to correct an ultrasonic imaging algorithm and is applied to a single-crystal test specimen. For this correctedalgorithm, the orientation of the crystal in a specimen must be known before the inspection. Using the same ultrasonic array to measure the orientation and perform the defect inspection offers the most practical solution. Therefore, potential crystallographic orientation methods using 2-D ultrasonic arrays are also developed and evaluated. PMID:21156370

  13. A simple configuration for fabrication of 2D and 3D photonic quasicrystals with complex structures

    NASA Astrophysics Data System (ADS)

    Sun, XiaoHong; Wang, Shuai; Liu, Wei; Jiang, LiuDi

    2016-06-01

    A simple method using a single-prism common-path interferometer is presented for the fabrication of complex quasicrystals in sub-micrometer scales. Multiple types of two-dimensional (2D) and three-dimensional (3D) quasicrystalline structures are designed and their diffraction patterns are obtained by using Fourier Transform method. Multi-fold rotational symmetries are demonstrated and compared. By using this method, a wide range of quasicrystals types can be produced with arbitrary complexities and rotational symmetries. The transmittance studies of 12-fold and 18-fold structures also reveal the existence of complete photonic bandgaps, which also demonstrates increased symmetry and significantly improved characteristics of photonic band-gaps.

  14. 2dx--user-friendly image processing for 2D crystals.

    PubMed

    Gipson, Bryant; Zeng, Xiangyan; Zhang, Zi Yan; Stahlberg, Henning

    2007-01-01

    Electron crystallography determines the structure of two-dimensional (2D) membrane protein crystals and other 2D crystal systems. Cryo-transmission electron microscopy records high-resolution electron micrographs, which require computer processing for three-dimensional structure reconstruction. We present a new software system 2dx, which is designed as a user-friendly, platform-independent software package for electron crystallography. 2dx assists in the management of an image-processing project, guides the user through the processing of 2D crystal images, and provides transparence for processing tasks and results. Algorithms are implemented in the form of script templates reminiscent of c-shell scripts. These templates can be easily modified or replaced by the user and can also execute modular stand-alone programs from the MRC software or from other image processing software packages. 2dx is available under the GNU General Public License at 2dx.org. PMID:17055742

  15. Thermal tunability of photonic bandgaps in liquid crystal filled polymer photonic crystal fiber

    NASA Astrophysics Data System (ADS)

    Wang, Doudou; Chen, Guoxiang; Wang, Lili

    2016-05-01

    A highly tunable bandgap-guiding polymer photonic crystal fiber is designed by infiltrating the cladding air holes with liquid crystal 5CB. Structural parameter dependence and thermal tunability of the photonic bandgaps, mode properties and confinement losses of the designed fiber are investigated. Bandgaps red shift as the temperature goes up. Average thermal tuning sensitivity of 30.9 nm/°C and 20.6 nm/°C is achieved around room temperature for the first and second photonic bandgap, respectively. Our results provide theoretical references for applications of polymer photonic crystal fiber in sensing and tunable fiber-optic devices.

  16. Silicon photonic crystal resonators for label free biosensor

    NASA Astrophysics Data System (ADS)

    Sana, Amrita Kumar; Honzawa, Keita; Amemiya, Yoshiteru; Yokoyama, Shin

    2016-04-01

    We report the fabrication and characterization of a two-dimensional (2D) silicon photonic crystal biosensor consisting of waveguides and cavity-type and defect-type resonators for enhancing the interactions between light and biomaterials. Sensitivity was measured using sucrose solution and the sensor showed the highest sensitivity [1570 nm/RIU (refractive index unit)] ever reported. We also investigated cavity size effects on resonance wavelength shift, and we observed that a large cavity exhibits a greater resonance wavelength shift. The fabricated sensor has shown a high Q of ∼105 in water and a device figure of merit of 1.2 × 105, which represent the improvements of the device performance over other photonic-crystal-based sensors.

  17. Liquid scintillator for 2D dosimetry for high-energy photon beams

    SciTech Connect

    Poenisch, Falk; Archambault, Louis; Briere, Tina Marie; Sahoo, Narayan; Mohan, Radhe; Beddar, Sam; Gillin, Michael T.

    2009-05-15

    Complex radiation therapy techniques require dosimetric verification of treatment planning and delivery. The authors investigated a liquid scintillator (LS) system for application for real-time high-energy photon beam dosimetry. The system was comprised of a transparent acrylic tank filled with liquid scintillating material, an opaque outer tank, and a CCD camera. A series of images was acquired when the tank with liquid scintillator was irradiated with a 6 MV photon beam, and the light data measured with the CCD camera were filtered to correct for scattering of the optical light inside the liquid scintillator. Depth-dose and lateral profiles as well as two-dimensional (2D) dose distributions were found to agree with results from the treatment planning system. Further, the corrected light output was found to be linear with dose, dose rate independent, and is robust for single or multiple acquisitions. The short time needed for image acquisition and processing could make this system ideal for fast verification of the beam characteristics of the treatment machine. This new detector system shows a potential usefulness of the LS for 2D QA.

  18. Liquid crystal devices for photonics applications

    NASA Astrophysics Data System (ADS)

    Chigrinov, Vladimir G.

    2007-11-01

    Liquid crystal (LC) devices for Photonics applications is a hot topic of research. Such elements begin to appear in Photonics market. Passive elements for fiber optical communication systems (DWDM components) based on LC cells can successfully compete with the other elements used for the purpose, such as micro electromechanical (MEM), thermo-optical, opto-mechanical or acousto-optical devices. Application of nematic and ferroelectric LC for high speed communication systems, producing elements that are extremely fast, stable, durable, of low loss, operable over a wide temperature range, and that require small operating voltages and extremely low power consumption. The known LC applications in fiber optics enable to produce switches, filters, attenuators, equalizers, polarization controllers, phase emulators and other fiber optical components. Good robustness due to the absence of moving parts and compatibility with VLSI technology, excellent parameters in a large photonic wavelength range, whereas the complexity of the design and the cost of the device are equivalent to regular passive matrix LC displays makes LC fiber optical devices very attractive for mass production. We have already successfully fabricated certain prototypes of the optical switches based on ferroelectric and nematic LC materials. The electrooptical modes used for the purpose included the light polarization rotation, voltage controllable diffraction and fast switching of the LC refractive index. We used the powerful software to optimize the LC modulation characteristics. Use of photo-alignment technique pioneered by us makes it possible to develop new LC fiber components. Almost all the criteria of perfect LC alignment are met in case of azo-dye layers. We have already used azo-dye materials to align LC in superthin photonic holes, curved and 3D surfaces and as cladding layers in microring silicon based resonators. The prototypes of new LC efficient Photonics devices are envisaged. Controllable

  19. Photon Molecules in Atomic Gases Trapped Near Photonic Crystal Waveguides

    NASA Astrophysics Data System (ADS)

    Douglas, James S.; Caneva, Tommaso; Chang, Darrick E.

    2016-07-01

    Realizing systems that support robust, controlled interactions between individual photons is an exciting frontier of nonlinear optics. To this end, one approach that has emerged recently is to leverage atomic interactions to create strong and spatially nonlocal interactions between photons. In particular, effective photonic interactions have been successfully created via interactions between atoms excited to Rydberg levels. Here, we investigate an alternative approach, in which atomic interactions arise via their common coupling to photonic crystal waveguides. This technique takes advantage of the ability to separately tailor the strength and range of interactions via the dispersion engineering of the structure itself, which can lead to qualitatively new types of phenomena. For example, much of the work on photon-photon interactions relies on the linear optical effect of electromagnetically induced transparency, in combination with the use of interactions to shift optical pulses into or out of the associated transparency window. Here, we identify a large new class of "correlated transparency windows," in which photonic states of a certain number and shape selectively propagate through the system. Through this technique, we show that molecular bound states of photon pairs can be created.

  20. Optomechanics of two- and three-dimensional soft photonic crystals

    NASA Astrophysics Data System (ADS)

    Krishnan, Dwarak

    Soft photonic crystals are a class of periodic dielectric structures that undergo highly nonlinear deformation due to strain or other external stimulus such as temperature, pH etc. This can in turn dramatically affect optical properties such as light transmittance. Moreover certain classes of lithographically fabricated structures undergo some structural distortion due to the effects of processing, eventually affecting the optical properties of the final photonic crystal. In this work, we study the deformation mechanics of soft photonic crystal structures using realistic physics-based models and leverage that understanding to explain the optomechanics of actual 2-D and 3-D soft photonic crystals undergoing similar symmetry breaking nonlinear deformations. We first study the optomechanics of two classes of 3-D soft photonic crystals: (1) hydrogel and (2) elastomer based material systems. The hydrogel based inverse face-centered-cubic structure undergoes swelling with change in pH of the surrounding fluid. The inverse structure is a network of bulky domains with thin ligament-like connections, and it undergoes a pattern transformation from FCC to L11 as a result of swelling. A continuum scale poroelasticity based coupled fluid-diffusion FEM model is developed to accurately predict this mechanical behavior. Light transmittance simulation results qualitatively explain the experimentally observed trends in the optical behavior with pH change. The elastomer based, lithographically fabricated material experiences shrinkage induced distortion upon processing. This behavior is modeled using FEM with the material represented by a neo-Hookean constitutive law. The light transmittance calculations for normal incidence are carried out using the transfer matrix method and a good comparison is obtained for the positions of first and second order reflectance peaks. A unit cell based approach is taken to compute the photonic bandstructure to estimate light propagation through the

  1. A silicon photonic quasi-crystal structure obtained by interference lithography

    NASA Astrophysics Data System (ADS)

    Lis, S.; Zakrzewski, A.; Gryglewicz, J.; Oleszkiewicz, W.; Patela, S.

    2012-06-01

    Photonic quasi-crystal structures have been prepared and investigated. Symmetrical patterns were fabricated by interference lithography in negative tone photoresist and transferred to silicon by reactive ion etching. Theoretical influences of pattern detail (radius of hole) on the photonic band gap have been studied. Three types of 2D photonic quasi-crystals have been prepared: 8-fold, 10-fold and 12-fold pattern. Finally, finite-difference time-domain method was used for theoretically prediction of transmission spectrum for fabricated 12-fold quasi-crystal.

  2. One-Dimensional Photonic Crystal Superprisms

    NASA Technical Reports Server (NTRS)

    Ting, David

    2005-01-01

    Theoretical calculations indicate that it should be possible for one-dimensional (1D) photonic crystals (see figure) to exhibit giant dispersions known as the superprism effect. Previously, three-dimensional (3D) photonic crystal superprisms have demonstrated strong wavelength dispersion - about 500 times that of conventional prisms and diffraction gratings. Unlike diffraction gratings, superprisms do not exhibit zero-order transmission or higher-order diffraction, thereby eliminating cross-talk problems. However, the fabrication of these 3D photonic crystals requires complex electron-beam substrate patterning and multilayer thin-film sputtering processes. The proposed 1D superprism is much simpler in structural complexity and, therefore, easier to design and fabricate. Like their 3D counterparts, the 1D superprisms can exhibit giant dispersions over small spectral bands that can be tailored by judicious structure design and tuned by varying incident beam direction. Potential applications include miniature gas-sensing devices.

  3. Computational Modeling of Photonic Crystal Microcavity Single-Photon Emitters

    NASA Astrophysics Data System (ADS)

    Saulnier, Nicole A.

    Conventional cryptography is based on algorithms that are mathematically complex and difficult to solve, such as factoring large numbers. The advent of a quantum computer would render these schemes useless. As scientists work to develop a quantum computer, cryptographers are developing new schemes for unconditionally secure cryptography. Quantum key distribution has emerged as one of the potential replacements of classical cryptography. It relics on the fact that measurement of a quantum bit changes the state of the bit and undetected eavesdropping is impossible. Single polarized photons can be used as the quantum bits, such that a quantum system would in some ways mirror the classical communication scheme. The quantum key distribution system would include components that create, transmit and detect single polarized photons. The focus of this work is on the development of an efficient single-photon source. This source is comprised of a single quantum dot inside of a photonic crystal microcavity. To better understand the physics behind the device, a computational model is developed. The model uses Finite-Difference Time-Domain methods to analyze the electromagnetic field distribution in photonic crystal microcavities. It uses an 8-band k · p perturbation theory to compute the energy band structure of the epitaxially grown quantum dots. We discuss a method that combines the results of these two calculations for determining the spontaneous emission lifetime of a quantum dot in bulk material or in a microcavity. The computational models developed in this thesis are used to identify and characterize microcavities for potential use in a single-photon source. The computational tools developed are also used to investigate novel photonic crystal microcavities that incorporate 1D distributed Bragg reflectors for vertical confinement. It is found that the spontaneous emission enhancement in the quasi-3D cavities can be significantly greater than in traditional suspended slab

  4. Veselago lens by photonic hyper-crystals

    SciTech Connect

    Huang, Zun Narimanov, Evgenii E.

    2014-07-21

    Based on the recent concept of the photonic hyper-crystal—an artificial optical medium that combines the properties of hyperbolic materials and photonic crystals, we present the imaging system functioning as a Veselago lens. This planar lens shows a nearly constant negative refractive index with substantially reduced image aberrations, and can find potential applications in photolithography and hot-spots detection of silicon-based integrated circuits.

  5. Integrated photonic crystal selective emitter for thermophotovoltaics

    NASA Astrophysics Data System (ADS)

    Zhou, Zhiguang; Yehia, Omar; Bermel, Peter

    2016-01-01

    Converting blackbody thermal radiation to electricity via thermophotovoltaics (TPV) is inherently inefficient. Photon recycling using cold-side filters offers potentially improved performance but requires extremely close spacing between the thermal emitter and the receiver, namely a high view factor. Here, we propose an alternative approach for thermal energy conversion, the use of an integrated photonic crystal selective emitter (IPSE), which combines two-dimensional photonic crystal selective emitters and filters into a single device. Finite difference time domain and current transport simulations show that IPSEs can significantly suppress sub-bandgap photons. This increases heat-to-electricity conversion for photonic crystal based emitters from 35.2 up to 41.8% at 1573 K for a GaSb photovoltaic (PV) diode with matched bandgaps of 0.7 eV. The physical basis of this enhancement is a shift from a perturbative to a nonperturbative regime, which maximized photon recycling. Furthermore, combining IPSEs with nonconductive optical waveguides eliminates a key difficulty associated with TPV: the need for precise alignment between the hot selective emitter and cool PV diode. The physical effects of both the IPSE and waveguide can be quantified in terms of an extension of the concept of an effective view factor.

  6. Ultra compact spectrometer apparatus and method using photonic crystals

    NASA Technical Reports Server (NTRS)

    Ting, David Z. (Inventor); Hill, Cory J. (Inventor); Bandara, Sumith V. (Inventor); Gunapala, Sarath D. (Inventor)

    2009-01-01

    The present invention is directed to methods of photonic crystal formation, and to methods and apparatus for using such photonic crystals, particularly in conjunction with detector arrays. Photonic crystal parameters and detector array parameters are compared to optimize the selection and orientation of a photonic crystal shape. A photonic crystal is operatively positioned relative to a plurality of light sensors. The light sensors can be separated by a pitch distance and positioned within one half of the pitch distance of an exit surface of the photonic crystals.

  7. Optical amplification enhancement in photonic crystals

    SciTech Connect

    Sapienza, R.; Leonetti, M.; Froufe-Perez, L. S.; Galisteo-Lopez, J. F.; Lopez, C.; Conti, C.

    2011-02-15

    Improving and controlling the efficiency of a gain medium is one of the most challenging problems of laser research. By measuring the gain length in an opal-based photonic crystal doped with laser dye, we demonstrate that optical amplification is more than twenty-fold enhanced along the {Gamma}-K symmetry directions of the face-centered-cubic photonic crystal. These results are theoretically explained by directional variations of the density of states, providing a quantitative connection between density of the states and light amplification.

  8. Combining 2D synchrosqueezed wave packet transform with optimization for crystal image analysis

    NASA Astrophysics Data System (ADS)

    Lu, Jianfeng; Wirth, Benedikt; Yang, Haizhao

    2016-04-01

    We develop a variational optimization method for crystal analysis in atomic resolution images, which uses information from a 2D synchrosqueezed transform (SST) as input. The synchrosqueezed transform is applied to extract initial information from atomic crystal images: crystal defects, rotations and the gradient of elastic deformation. The deformation gradient estimate is then improved outside the identified defect region via a variational approach, to obtain more robust results agreeing better with the physical constraints. The variational model is optimized by a nonlinear projected conjugate gradient method. Both examples of images from computer simulations and imaging experiments are analyzed, with results demonstrating the effectiveness of the proposed method.

  9. Self-assembled tunable photonic hyper-crystals

    NASA Astrophysics Data System (ADS)

    Smolyaninov, Igor; Smolyaninova, Vera; Yost, Bradley; Lahneman, David; Gresock, Thomas; Narimanov, Evgenii

    2015-03-01

    We demonstrate a novel artificial optical material, the photonic hyper-crystal, which combines the most interesting features of hyperbolic metamaterials and photonic crystals. Similar to hyperbolic metamaterials, photonic hyper-crystals exhibit broadband divergence in their photonic density of states due to the lack of usual diffraction limit on the photon wave vector. On the other hand, similar to photonic crystals, hyperbolic dispersion law of extraordinary photons is modulated by forbidden gaps near the boundaries of photonic Brillouin zones. Three dimensional self-assembly of photonic hyper-crystals has been achieved by application of external magnetic field to a cobalt nanoparticle-based ferrofluid. Unique spectral properties of photonic hyper-crystals lead to extreme sensitivity of the material to monolayer coatings of cobalt nanoparticles, which should find numerous applications in biological and chemical sensing. This work was supported in part by NSF Grant DMR-1104676, NSF Center for Photonic and Multiscale Nanomaterials, ARO MURI and Gordon and Berry Moore Foundation.

  10. Optical properties of two-dimensional metamaterial photonic crystals

    SciTech Connect

    Mejía-Salazar, J. R.

    2013-12-14

    In the present work, we theoretically study a 2D photonic crystal (PC) comprised by double negative (DNG) metamaterial cylinders, showing that such a system presents a superior light-matter interaction when compared with their single negative (SNG) plasmonic PC counterparts, suggesting a route to enhance the performance of sensors and photovoltaic cells. On the other hand, we have observed that depending on the frequency, the mode symmetry resembles either the case of SNG electric (SNG-E) or SNG magnetic (SNG-M) PC, suggesting that either the electric or magnetic character of the DNG metamaterial dominates in each case.

  11. Extraordinary wavelength reduction in terahertz graphene-cladded photonic crystal slabs

    NASA Astrophysics Data System (ADS)

    Williamson, Ian A. D.; Mousavi, S. Hossein; Wang, Zheng

    2016-05-01

    Photonic crystal slabs have been widely used in nanophotonics for light confinement, dispersion engineering, nonlinearity enhancement, and other unusual effects arising from their structural periodicity. Sub-micron device sizes and mode volumes are routine for silicon-based photonic crystal slabs, however spectrally they are limited to operate in the near infrared. Here, we show that two single-layer graphene sheets allow silicon photonic crystal slabs with submicron periodicity to operate in the terahertz regime, with an extreme 100× wavelength reduction from graphene’s large kinetic inductance. The atomically thin graphene further leads to excellent out-of-plane confinement, and consequently photonic-crystal-slab band structures that closely resemble those of ideal two-dimensional photonic crystals, with broad band gaps even when the slab thickness approaches zero. The overall photonic band structure not only scales with the graphene Fermi level, but more importantly scales to lower frequencies with reduced slab thickness. Just like ideal 2D photonic crystals, graphene-cladded photonic crystal slabs confine light along line defects, forming waveguides with the propagation lengths on the order of tens of lattice constants. The proposed structure opens up the possibility to dramatically reduce the size of terahertz photonic systems by orders of magnitude.

  12. Extraordinary wavelength reduction in terahertz graphene-cladded photonic crystal slabs.

    PubMed

    Williamson, Ian A D; Mousavi, S Hossein; Wang, Zheng

    2016-01-01

    Photonic crystal slabs have been widely used in nanophotonics for light confinement, dispersion engineering, nonlinearity enhancement, and other unusual effects arising from their structural periodicity. Sub-micron device sizes and mode volumes are routine for silicon-based photonic crystal slabs, however spectrally they are limited to operate in the near infrared. Here, we show that two single-layer graphene sheets allow silicon photonic crystal slabs with submicron periodicity to operate in the terahertz regime, with an extreme 100× wavelength reduction from graphene's large kinetic inductance. The atomically thin graphene further leads to excellent out-of-plane confinement, and consequently photonic-crystal-slab band structures that closely resemble those of ideal two-dimensional photonic crystals, with broad band gaps even when the slab thickness approaches zero. The overall photonic band structure not only scales with the graphene Fermi level, but more importantly scales to lower frequencies with reduced slab thickness. Just like ideal 2D photonic crystals, graphene-cladded photonic crystal slabs confine light along line defects, forming waveguides with the propagation lengths on the order of tens of lattice constants. The proposed structure opens up the possibility to dramatically reduce the size of terahertz photonic systems by orders of magnitude. PMID:27143314

  13. Extraordinary wavelength reduction in terahertz graphene-cladded photonic crystal slabs

    PubMed Central

    Williamson, Ian A. D.; Mousavi, S. Hossein; Wang, Zheng

    2016-01-01

    Photonic crystal slabs have been widely used in nanophotonics for light confinement, dispersion engineering, nonlinearity enhancement, and other unusual effects arising from their structural periodicity. Sub-micron device sizes and mode volumes are routine for silicon-based photonic crystal slabs, however spectrally they are limited to operate in the near infrared. Here, we show that two single-layer graphene sheets allow silicon photonic crystal slabs with submicron periodicity to operate in the terahertz regime, with an extreme 100× wavelength reduction from graphene’s large kinetic inductance. The atomically thin graphene further leads to excellent out-of-plane confinement, and consequently photonic-crystal-slab band structures that closely resemble those of ideal two-dimensional photonic crystals, with broad band gaps even when the slab thickness approaches zero. The overall photonic band structure not only scales with the graphene Fermi level, but more importantly scales to lower frequencies with reduced slab thickness. Just like ideal 2D photonic crystals, graphene-cladded photonic crystal slabs confine light along line defects, forming waveguides with the propagation lengths on the order of tens of lattice constants. The proposed structure opens up the possibility to dramatically reduce the size of terahertz photonic systems by orders of magnitude. PMID:27143314

  14. Systematic Approach to Electrostatically Induced 2D Crystallization of Nanoparticles at Liquid Interfaces

    SciTech Connect

    Fukuto, M.; Kewalramani, S.; Wang, S.; Lin, Y.; Nguyen, G.; Wang, Q.; Yang, L.

    2011-02-07

    We report an experimental demonstration of a strategy for inducing two-dimensional (2D) crystallization of charged nanoparticles on oppositely charged fluid interfaces. This strategy aims to maximize the interfacial adsorption of nanoparticles, and hence their lateral packing density, by utilizing a combination of weakly charged particles and a high surface charge density on the planar interface. In order to test this approach, we investigated the assembly of cowpea mosaic virus (CPMV) on positively charged lipid monolayers at the aqueous solution surface, by means of in situ X-ray scattering measurements at the liquid-vapor interface. The assembly was studied as a function of the solution pH, which was used to vary the charge on CPMV, and of the mole fraction of the cationic lipid in the binary lipid monolayer, which set the interface charge density. The 2D crystallization of CPMV occurred in a narrow pH range just above the particle's isoelectric point, where the particle charge was weakly negative, and only when the cationic-lipid fraction in the monolayer exceeded a threshold. The observed 2D crystals exhibited nearly the same packing density as the densest lattice plane within the known 3D crystals of CPMV. The above electrostatic approach of maximizing interfacial adsorption may provide an efficient route to the crystallization of nanoparticles at aqueous interfaces.

  15. 2D crystals of transition metal dichalcogenide and their iontronic functionalities

    NASA Astrophysics Data System (ADS)

    Zhang, Y. J.; Yoshida, M.; Suzuki, R.; Iwasa, Y.

    2015-12-01

    2D crystals based on transition metal dichalcogenides (TMDs) provide a unique platform of novel physical properties and functionalities, including photoluminescence, laser, valleytronics, spintronics, piezoelectric devices, field effect transistors (FETs), and superconductivity. Among them, FET devices are extremely useful because of voltage-tunable carrier density and Fermi energy. In particular, high density charge accumulation in electric double layer transistor (EDLT), which is a FET device driven by ionic motions, is playing key roles for expanding the functionalities of TMD based 2D crystals. Here, we report several device concepts which were realized by introducing EDLTs in TMDs, taking the advantage of their extremely unique band structures and phase transition phenomena realized simply by thinning to the monolayer level. We address two kinds of TMDs based on group VI and group V transition metals, which basically yield semiconductors and metals, respectively. For each system, we first introduce peculiar characteristics of TMDs achieved by thinning the crystals, followed by the related FET functionalities.

  16. Investigation on the properties of omnidirectional photonic band gaps in two-dimensional plasma photonic crystals

    NASA Astrophysics Data System (ADS)

    Zhang, Hai-Feng; Liu, Shao-Bin; Li, Bing-Xiang

    2016-01-01

    The properties of omnidirectional photonic band gaps (OBGs) in two-dimensional plasma photonic crystals (2D PPCs) are theoretically investigated by the modified plane wave expansion method. In the simulation, we consider the off-plane incident wave vector. The configuration of 2D PPCs is the triangular lattices filled with the nonmagnetized plasma cylinders in the homogeneous and isotropic dielectric background. The calculated results show that the proposed 2D PPCs possess a flatbands region and the OBGs. Compared with the OBGs in the conventional 2D dielectric-air PCs, it can be obtained more easily and enlarged in the 2D PPCs with a similar structure. The effects of configurational parameters of the PPCs on the OBGs also are studied. The simulated results demonstrate that the locations of OBGs can be tuned easily by manipulating those parameters except for changing plasma collision frequency. The achieved OBGs can be enlarged by optimizations. The OBGs of two novel configurations of PPCs with different cross sections are computed for a comparison. Both configurations have the advantages of obtaining the larger OBGs compared with the conventional configuration, since the symmetry of 2D PPCs is broken by different sizes of periodically inserted plasma cylinders or connected by the embedded plasma cylinders with thin veins. The analysis of the results shows that the bandwidths of OBGs can be tuned by changing geometric and physical parameters of such two PPCs structures. The theoretical results may open a new scope for designing the omnidirectional reflectors or mirrors based on the 2D PPCs.

  17. The 2D Selfassembly of Benzimidazole and its Co-crystallization

    NASA Astrophysics Data System (ADS)

    Costa, Paulo; Teeter, Jacob; Kunkel, Donna; Sinitskii, Alexander; Enders, Axel

    Benzimidazoles (BI) are organic molecules that form ferroelectric crystals. Key to their ferroelectric behavior are the switchable N . . . HN type bonds and how they couple to the electron system of the molecules. We attempted to crystallize BI on various metal surfaces and studied them using STM. We observed that on Au and Ag, BI joins into zipper chains characteristic of its bulk structure that can pack into a continuous 2D layer. Because the dipole of BI lies in the direction of its switchable hydrogen bond, these zippers should in principle have reversible polarizations that point along the direction they run. BI's crystallization is reminiscent to how croconic acid (CA) crystallizes in 2D using O . . . HO bonding, suggesting that these molecules may be able to co-crystallize through OH . . . N bonds. This would present the opportunity to modify BI's properties, such as the energy needed to switch a hydrogen from a donor to acceptor site. When co-deposited, CA and BI successfully combine into a co-crystal formed by building blocks consisting of 2 CA and 2 BI molecules. These findings demonstrate the usefulness of using STM as a preliminary check to verify if two molecules are compatible with each other without having to attempt crystallization with multiple solvents and mixing methods.

  18. Fabrication of Refractive Index Tunable Polydimethylsiloxane Photonic Crystal for Biosensor Application

    NASA Astrophysics Data System (ADS)

    Raman, Karthik; Murthy, T. R. Srinivasa; Hegde, G. M.

    Photonic crystal based nanostructures are expected to play a significant role in next generation nanophotonic devices. Recent developments in two-dimensional (2D) photonic crystal based devices have created widespread interest as such planar photonic structures are compatible with conventional microelectronic and photonic devices. Various optical components such as waveguides, resonators, modulators and demultiplexers have been designed and fabricated based on 2D photonic crystal geometry. This paper presents the fabrication of refractive index tunable Polydimethylsiloxane (PDMS) polymer based photonic crystals. The advantages of using PDMS are mainly its chemical stability, bio-compatibility and the stack reduces sidewall roughness scattering. The PDMS structure with square lattice was fabricated by using silicon substrate patterned with SU8-2002 resist. The 600 nm period grating of PDMS is then fabricated using Nano-imprinting. In addition, the refractive index of PDMS is modified using certain additive materials. The resulting photonic crystals are suitable for application in photonic integrated circuits and biological applications such as filters, cavities or microlaser waveguides.

  19. Photon statistics in scintillation crystals

    NASA Astrophysics Data System (ADS)

    Bora, Vaibhav Joga Singh

    Scintillation based gamma-ray detectors are widely used in medical imaging, high-energy physics, astronomy and national security. Scintillation gamma-ray detectors are eld-tested, relatively inexpensive, and have good detection eciency. Semi-conductor detectors are gaining popularity because of their superior capability to resolve gamma-ray energies. However, they are relatively hard to manufacture and therefore, at this time, not available in as large formats and much more expensive than scintillation gamma-ray detectors. Scintillation gamma-ray detectors consist of: a scintillator, a material that emits optical (scintillation) photons when it interacts with ionization radiation, and an optical detector that detects the emitted scintillation photons and converts them into an electrical signal. Compared to semiconductor gamma-ray detectors, scintillation gamma-ray detectors have relatively poor capability to resolve gamma-ray energies. This is in large part attributed to the "statistical limit" on the number of scintillation photons. The origin of this statistical limit is the assumption that scintillation photons are either Poisson distributed or super-Poisson distributed. This statistical limit is often dened by the Fano factor. The Fano factor of an integer-valued random process is dened as the ratio of its variance to its mean. Therefore, a Poisson process has a Fano factor of one. The classical theory of light limits the Fano factor of the number of photons to a value greater than or equal to one (Poisson case). However, the quantum theory of light allows for Fano factors to be less than one. We used two methods to look at the correlations between two detectors looking at same scintillation pulse to estimate the Fano factor of the scintillation photons. The relationship between the Fano factor and the correlation between the integral of the two signals detected was analytically derived, and the Fano factor was estimated using the measurements for SrI2:Eu, YAP

  20. Self-assembled tunable photonic hyper-crystals.

    PubMed

    Smolyaninova, Vera N; Yost, Bradley; Lahneman, David; Narimanov, Evgenii E; Smolyaninov, Igor I

    2014-01-01

    We demonstrate a novel artificial optical material, the "photonic hyper-crystal", which combines the most interesting features of hyperbolic metamaterials and photonic crystals. Similar to hyperbolic metamaterials, photonic hyper-crystals exhibit broadband divergence in their photonic density of states due to the lack of usual diffraction limit on the photon wave vector. On the other hand, similar to photonic crystals, hyperbolic dispersion law of extraordinary photons is modulated by forbidden gaps near the boundaries of photonic Brillouin zones. Three dimensional self-assembly of photonic hyper-crystals has been achieved by application of external magnetic field to a cobalt nanoparticle-based ferrofluid. Unique spectral properties of photonic hyper-crystals lead to extreme sensitivity of the material to monolayer coatings of cobalt nanoparticles, which should find numerous applications in biological and chemical sensing. PMID:25027947

  1. Visible stealth materials based on photonic crystals

    NASA Astrophysics Data System (ADS)

    Yao, Guozheng; Liu, Ying

    2014-08-01

    Optical thin film can be used for invisible cloak. As a kind of low-dimension photonic crystal, it is a candidate for metamaterial with designed Σ and μ. As a coating, it is convenient to be stacked to mimic continuous changing of electromagnetic media. Anti-reflection film is suitable for matching coating between layers of media.

  2. Fabrication and Analysis of Photonic Crystals

    ERIC Educational Resources Information Center

    Campbell, Dean J.; Korte, Kylee E.; Xia, Younan

    2007-01-01

    These laboratory experiments are designed to explore aspects of nanoscale chemistry by constructing and spectroscopically analyzing thin films of photonic crystals. Films comprised of colloidal spheres and polydimethylsiloxane exhibit diffraction-based stop bands that shift reversibly upon exposure to some common solvents. Topics covered in these…

  3. Photonic Crystal Sensors Based on Porous Silicon

    PubMed Central

    Pacholski, Claudia

    2013-01-01

    Porous silicon has been established as an excellent sensing platform for the optical detection of hazardous chemicals and biomolecular interactions such as DNA hybridization, antigen/antibody binding, and enzymatic reactions. Its porous nature provides a high surface area within a small volume, which can be easily controlled by changing the pore sizes. As the porosity and consequently the refractive index of an etched porous silicon layer depends on the electrochemial etching conditions photonic crystals composed of multilayered porous silicon films with well-resolved and narrow optical reflectivity features can easily be obtained. The prominent optical response of the photonic crystal decreases the detection limit and therefore increases the sensitivity of porous silicon sensors in comparison to sensors utilizing Fabry-Pérot based optical transduction. Development of porous silicon photonic crystal sensors which allow for the detection of analytes by the naked eye using a simple color change or the fabrication of stacked porous silicon photonic crystals showing two distinct optical features which can be utilized for the discrimination of analytes emphasize its high application potential. PMID:23571671

  4. Strong transmittance above the light line in mid-infrared two-dimensional photonic crystals

    SciTech Connect

    Kraeh, Christian; Martinez-Hurtado, J. L.; Zeitlmair, Martin; Finley, Jonathan J.; Popescu, Alexandru; Hedler, Harry

    2015-06-14

    The mid-infrared region of the electromagnetic spectrum between 3 and 8 μm hosts absorption lines of gases relevant for chemical and biological sensing. 2D photonic crystal structures capable of guiding light in this region of the spectrum have been widely studied, and their implementation into miniaturized sensors has been proposed. However, light guiding in conventional 2D photonic crystals is usually restricted to a frequency range below the light line, which is the dispersion relation of light in the media surrounding the structures. These structures rely on total internal reflection for confinement of the light in z-direction normal to the lattice plane. In this work, 2D mid-infrared photonic crystals consisting of microtube arrays that mitigate these limitations have been developed. Due to their high aspect ratios of ∼1:30, they are perceived as semi-infinite in the z-direction. Light transmission experiments in the 5–8 μm range reveal attenuations as low as 0.27 dB/100 μm, surpassing the limitations for light guiding above the light line in conventional 2D photonic crystals. Fair agreement is obtained between these experiments, 2D band structure and transmission simulations.

  5. Strong transmittance above the light line in mid-infrared two-dimensional photonic crystals

    NASA Astrophysics Data System (ADS)

    Kraeh, Christian; Martinez-Hurtado, J. L.; Zeitlmair, Martin; Popescu, Alexandru; Hedler, Harry; Finley, Jonathan J.

    2015-06-01

    The mid-infrared region of the electromagnetic spectrum between 3 and 8 μm hosts absorption lines of gases relevant for chemical and biological sensing. 2D photonic crystal structures capable of guiding light in this region of the spectrum have been widely studied, and their implementation into miniaturized sensors has been proposed. However, light guiding in conventional 2D photonic crystals is usually restricted to a frequency range below the light line, which is the dispersion relation of light in the media surrounding the structures. These structures rely on total internal reflection for confinement of the light in z-direction normal to the lattice plane. In this work, 2D mid-infrared photonic crystals consisting of microtube arrays that mitigate these limitations have been developed. Due to their high aspect ratios of ˜1:30, they are perceived as semi-infinite in the z-direction. Light transmission experiments in the 5-8 μm range reveal attenuations as low as 0.27 dB/100 μm, surpassing the limitations for light guiding above the light line in conventional 2D photonic crystals. Fair agreement is obtained between these experiments, 2D band structure and transmission simulations.

  6. Dynamically tunable graphene/dielectric photonic crystal transmission lines

    NASA Astrophysics Data System (ADS)

    Williamson, Ian; Mousavi, S. Hossein; Wang, Zheng

    2015-03-01

    It is well known that graphene supports plasmonic modes with high field confinement and lower losses when compared to conventional metals. Additionally, graphene features a highly tunable conductivity through which the plasmon dispersion can be modulated. Over the years these qualities have inspired a wide range of applications for graphene in the THz and infrared regimes. In this presentation we theoretically demonstrate a graphene parallel plate waveguide (PPWG) that sandwiches a 2D photonic crystal slab. The marriage of these two geometries offers a large two dimensional band gap that can be dynamically tuned over a very broad bandwidth. Our device operates in the low-THz band where the graphene PPWG supports a quasi-TEM mode with a relatively flat attenuation. Unlike conventional photonic crystal slabs, the quasi-TEM nature of the graphene PPWG mode allows the slab thickness to be less than 1/10 of the photonic crystal lattice constant. These features offer up a wealth of opportunities, including tunable metamaterials with a possible platform for large band gaps in 3D structures through tiling and stacking. Additionally, the geometry provides a platform for tunable defect cavities without needing three dimensional periodicity.

  7. Modeling of Photonic Band Gap Crystals and Applications

    SciTech Connect

    Ihab Fathy El-Kady

    2002-08-27

    In this work, the authors have undertaken a theoretical approach to the complex problem of modeling the flow of electromagnetic waves in photonic crystals. The focus is to address the feasibility of using the exciting phenomena of photonic gaps (PBG) in actual applications. The authors start by providing analytical derivations of the computational electromagnetic methods used in their work. They also present a detailed explanation of the physics underlying each approach, as well as a comparative study of the strengths and weaknesses of each method. The Plane Wave expansion, Transfer Matrix, and Finite Difference time Domain Methods are addressed. They also introduce a new theoretical approach, the Modal Expansion Method. They then shift the attention to actual applications. They begin with a discussion of 2D photonic crystal wave guides. The structure addressed consists of a 2D hexagonal structure of air cylinders in a layered dielectric background. Comparison with the performance of a conventional guide is made, as well as suggestions for enhancing it. The studies provide an upper theoretical limit on the performance of such guides, as they assumed no crystal imperfections and non-absorbing media. Next, they study 3D metallic PBG materials at near infrared and optical wavelengths. The main objective is to study the importance of absorption in the metal and the suitability of observing photonic band gaps in such structures. They study simple cubic structures where the metallic scatters are either cubes or interconnected metallic rods. Several metals are studied (aluminum, gold, copper, and silver). The effect of topology is addressed and isolated metallic cubes are found to be less lossy than the connected rod structures. The results reveal that the best performance is obtained by choosing metals with a large negative real part of the dielectric function, together with a relatively small imaginary part. Finally, they point out a new direction in photonic crystal

  8. Tunable one-dimensional photonic crystal slabs

    NASA Astrophysics Data System (ADS)

    Beccherelli, R.; Bellini, B.; Zografopoulos, D.; Kriezis, E.

    2007-05-01

    A 1D photonic crystal slab based on preferential etching of commercially available silicon-on-insulator wafers is presented. Compared to dry etching, anisotropic wet etching is more tolerant to errors as it is self-stopping on crystallographic {111} planes and it produces a more precise geometry with symmetries and homothetic properties, with surface roughness close to 1 nm. The resulting grooves are infiltrated by low viscosity liquid crystal having large positive optical anisotropy. The use of slanted grooves provides advantages: first of all the complete filling of slanted grooves is simplified when compared to vertical walls structures. Furthermore alignment is significantly facilitated. Indeed the liquid crystal molecules tend to align with their long axis along the submicron grooves. Therefore by forcing reorientation out of a rest position, the liquid crystal presents a choice of refractive indices to the propagating optical field. The liquid crystal behavior is simulated by a finite element method, and coupled to a finite difference time domain method. We investigate different photonic crystal configurations. Large tunability of bandgap edge for TE polarization is demonstrated when switching the liquid crystal with an applied voltage. We have also studied the use of the same device geometry as a very compact microfluidic refractometric sensor.

  9. Self-Assembly of Graphene Single Crystals with Uniform Size and Orientation: The First 2D Super-Ordered Structure.

    PubMed

    Zeng, Mengqi; Wang, Lingxiang; Liu, Jinxin; Zhang, Tao; Xue, Haifeng; Xiao, Yao; Qin, Zhihui; Fu, Lei

    2016-06-29

    The challenges facing the rapid developments of highly integrated electronics, photonics, and microelectromechanical systems suggest that effective fabrication technologies are urgently needed to produce ordered structures using components with high performance potential. Inspired by the spontaneous organization of molecular units into ordered structures by noncovalent interactions, we succeed for the first time in synthesizing a two-dimensional superordered structure (2DSOS). As demonstrated by graphene, the 2DSOS was prepared via self-assembly of high-quality graphene single crystals under mutual electrostatic force between the adjacent crystals assisted by airflow-induced hydrodynamic forces at the liquid metal surface. The as-obtained 2DSOS exhibits tunable periodicity in the crystal space and outstanding uniformity in size and orientation. Moreover, the intrinsic property of each building block is preserved. With simplicity, scalability, and continuously adjustable feature size, the presented approach may open new territory for the precise assembly of 2D atomic crystals and facilitate its application in structurally derived integrated systems. PMID:27313075

  10. Birefringence-Directed Raman Selection Rules in 2D Black Phosphorus Crystals.

    PubMed

    Mao, Nannan; Wu, Juanxia; Han, Bowen; Lin, Jingjing; Tong, Lianming; Zhang, Jin

    2016-05-01

    The incident and scattered light engaged in the Raman scattering process of low symmetry crystals always suffer from the birefringence-induced depolarization. Therefore, for anisotropic crystals, the classical Raman selection rules should be corrected by taking the birefringence effect into consideration. The appearance of the 2D anisotropic materials provides an excellent platform to explore the birefringence-directed Raman selection rules, due to its controllable thickness at the nanoscale that greatly simplifies the situation comparing with bulk materials. Herein, a theoretical and experimental investigation on the birefringence-directed Raman selection rules in the anisotropic black phosphorus (BP) crystals is presented. The abnormal angle-dependent polarized Raman scattering of the Ag modes in thin BP crystal, which deviates from the normal Raman selection rules, is successfully interpreted by the theoretical model based on birefringence. It is further confirmed by the examination of different Raman modes using different laser lines and BP samples of different thicknesses. PMID:27030911

  11. Dual curved photonic crystal ring resonator based channel drop filter using two-dimensional photonic crystal structure

    NASA Astrophysics Data System (ADS)

    Chhipa, Mayur Kumar; Dusad, Lalit Kumar

    2016-05-01

    In this paper channel drop filter (CDF) is designed using dual curved photonic crystal ring resonator (PCRR). The photonic band gap (PBG) is calculated by plane wave expansion (PWE) method and the photonic crystal (PhC) based on two dimensional (2D) square lattice periodic arrays of silicon (Si) rods in air structure have been investigated using finite difference time domain (FDTD) method. The number of rods in Z and X directions is 21 and 20 respectively with lattice constant 0.540 nm and rod radius r = 0.1 µm. The channel drop filter has been optimized for telecommunication wavelengths λ = 1.591 µm with refractive indices 3.533. In the designed structure further analysis is also done by changing whole rods refractive index and it has been observed that this filter may be used for filtering several other channels also. The designed structure is useful for CWDM systems. This device may serve as a key component in photonic integrated circuits. The device is ultra compact with the overall size around 123 µm2.

  12. Maximizing Photoluminescence Extraction in Silicon Photonic Crystal Slabs.

    PubMed

    Mahdavi, Ali; Sarau, George; Xavier, Jolly; Paraïso, Taofiq K; Christiansen, Silke; Vollmer, Frank

    2016-01-01

    Photonic crystal modes can be tailored for increasing light matter interactions and light extraction efficiencies. These PhC properties have been explored for improving the device performance of LEDs, solar cells and precision biosensors. Tuning the extended band structure of 2D PhC provides a means for increasing light extraction throughout a planar device. This requires careful design and fabrication of PhC with a desirable mode structure overlapping with the spectral region of emission. We show a method for predicting and maximizing light extraction from 2D photonic crystal slabs, exemplified by maximizing silicon photoluminescence (PL). Systematically varying the lattice constant and filling factor, we predict the increases in PL intensity from band structure calculations and confirm predictions in micro-PL experiments. With the near optimal design parameters of PhC, we demonstrate more than 500-fold increase in PL intensity, measured near band edge of silicon at room temperature, an enhancement by an order of magnitude more than what has been reported. PMID:27113674

  13. Maximizing Photoluminescence Extraction in Silicon Photonic Crystal Slabs

    PubMed Central

    Mahdavi, Ali; Sarau, George; Xavier, Jolly; Paraïso, Taofiq K.; Christiansen, Silke; Vollmer, Frank

    2016-01-01

    Photonic crystal modes can be tailored for increasing light matter interactions and light extraction efficiencies. These PhC properties have been explored for improving the device performance of LEDs, solar cells and precision biosensors. Tuning the extended band structure of 2D PhC provides a means for increasing light extraction throughout a planar device. This requires careful design and fabrication of PhC with a desirable mode structure overlapping with the spectral region of emission. We show a method for predicting and maximizing light extraction from 2D photonic crystal slabs, exemplified by maximizing silicon photoluminescence (PL). Systematically varying the lattice constant and filling factor, we predict the increases in PL intensity from band structure calculations and confirm predictions in micro-PL experiments. With the near optimal design parameters of PhC, we demonstrate more than 500-fold increase in PL intensity, measured near band edge of silicon at room temperature, an enhancement by an order of magnitude more than what has been reported. PMID:27113674

  14. Self-assembled tunable photonic hyper-crystals

    PubMed Central

    Smolyaninova, Vera N.; Yost, Bradley; Lahneman, David; Narimanov, Evgenii E.; Smolyaninov, Igor I.

    2014-01-01

    We demonstrate a novel artificial optical material, the “photonic hyper-crystal”, which combines the most interesting features of hyperbolic metamaterials and photonic crystals. Similar to hyperbolic metamaterials, photonic hyper-crystals exhibit broadband divergence in their photonic density of states due to the lack of usual diffraction limit on the photon wave vector. On the other hand, similar to photonic crystals, hyperbolic dispersion law of extraordinary photons is modulated by forbidden gaps near the boundaries of photonic Brillouin zones. Three dimensional self-assembly of photonic hyper-crystals has been achieved by application of external magnetic field to a cobalt nanoparticle-based ferrofluid. Unique spectral properties of photonic hyper-crystals lead to extreme sensitivity of the material to monolayer coatings of cobalt nanoparticles, which should find numerous applications in biological and chemical sensing. PMID:25027947

  15. Review on photonic crystal coatings for scintillators

    NASA Astrophysics Data System (ADS)

    Knapitsch, Arno; Lecoq, Paul

    2014-11-01

    The amount of light and its time distribution are key factors determining the performance of scintillators when used as radiation detectors. However most inorganic scintillators are made of heavy materials and suffer from a high index of refraction which limits light extraction efficiency. This increases the path length of the photons in the material with the consequence of higher absorption and tails in the time distribution of the extracted light. Photonic crystals are a relatively new way of conquering this light extraction problem. Basically they are a way to produce a smooth and controllable index matching between the scintillator and the output medium through the nanostructuration of a thin layer of optically transparent high index material deposited at the coupling face of the scintillator. Our review paper discusses the theory behind this approach as well as the simulation details. Furthermore the different lithography steps of the production of an actual photonic crystal sample will be explained. Measurement results of LSO scintillator pixels covered with a nanolithography machined photonic crystal surface are presented together with practical tips for the further development and improvement of this technique.

  16. Ultrafast state detection and 2D ion crystals in a Paul trap

    NASA Astrophysics Data System (ADS)

    Ip, Michael; Ransford, Anthony; Campbell, Wesley

    2016-05-01

    Projective readout of quantum information stored in atomic qubits typically uses state-dependent CW laser-induced fluorescence. This method requires an often sophisticated imaging system to spatially filter out the background CW laser light. We present an alternative approach that instead uses simple pulse sequences from a mode-locked laser to affect the same state-dependent excitations in less than 1 ns. The resulting atomic fluorescence occurs in the dark, allowing the placement of non-imaging detectors right next to the atom to improve the qubit state detection efficiency and speed. We also study 2D Coulomb crystals of atomic ions in an oblate Paul trap. We find that crystals with hundreds of ions can be held in the trap, potentially offering an alternative to the use of Penning traps for the quantum simulation of 2D lattice spin models. We discuss the classical physics of these crystals and the metastable states that are supported in 2D. This work is supported by the US Army Research Office.

  17. 2D Crystal heterostructures properties and growth by molecular beam epitaxy

    NASA Astrophysics Data System (ADS)

    Xing, Grace Huili

    Two-dimensional (2D) crystals such as transition metal dichalcogenides (TMDs) along with other families of layered materials including graphene, SnSe2, GaSe, BN etc, has attracted intense attention from the scientific community. One monolayer of such materials represent the thinnest ``quantum wells''. These layered materials typically possess an in-plane hexagonal crystal structure, and can be stacked together by interlayer van der Waals interactions. Therefore, it is possible to create novel heterostructures by stacking materials with large lattice mismatches and different properties, for instance, superconductors (NbSe2) , metals, semi-metals (graphene), semiconductors (MoS2) and insulators (BN). Numerous novel material properties and device concepts have been discovered, proposed and demonstrated lately. However, the low internal photoluminescence efficiency (IPE, <1%) and low carrier mobility observed in the 2D semiconductors suggest strongly that the materials under investigation today most likely suffer from a high concentration of defects. In this talk, I will share our progress and the challenges we face in terms of preparing, characterizing these 2D crystals as well as pursuing their applications. This work has been supported in part by NSF, AFOSR and LEAST, one of the STARnet centers.

  18. The bifoil photodyne: a photonic crystal oscillator.

    PubMed

    Lugo, J E; Doti, R; Sanchez, N; de la Mora, M B; del Rio, J A; Faubert, J

    2014-01-01

    Optical tweezers is an example how to use light to generate a physical force. They have been used to levitate viruses, bacteria, cells, and sub cellular organisms. Nonetheless it would be beneficial to use such force to develop a new kind of applications. However the radiation pressure usually is small to think in moving larger objects. Currently, there is some research investigating novel photonic working principles to generate a higher force. Here, we studied theoretically and experimentally the induction of electromagnetic forces in one-dimensional photonic crystals when light impinges on the off-axis direction. The photonic structure consists of a micro-cavity like structure formed of two one-dimensional photonic crystals made of free-standing porous silicon, separated by a variable air gap and the working wavelength is 633 nm. We show experimental evidence of this force when the photonic structure is capable of making auto-oscillations and forced-oscillations. We measured peak displacements and velocities ranging from 2 up to 35 microns and 0.4 up to 2.1 mm/s with a power of 13 mW. Recent evidence showed that giant resonant light forces could induce average velocity values of 0.45 mm/s in microspheres embedded in water with 43 mW light power. PMID:24423985

  19. The bifoil photodyne: a photonic crystal oscillator

    PubMed Central

    Lugo, J. E.; Doti, R.; Sanchez, N.; de la Mora, M. B.; del Rio, J. A.; Faubert, J.

    2014-01-01

    Optical tweezers is an example how to use light to generate a physical force. They have been used to levitate viruses, bacteria, cells, and sub cellular organisms. Nonetheless it would be beneficial to use such force to develop a new kind of applications. However the radiation pressure usually is small to think in moving larger objects. Currently, there is some research investigating novel photonic working principles to generate a higher force. Here, we studied theoretically and experimentally the induction of electromagnetic forces in one-dimensional photonic crystals when light impinges on the off-axis direction. The photonic structure consists of a micro-cavity like structure formed of two one-dimensional photonic crystals made of free-standing porous silicon, separated by a variable air gap and the working wavelength is 633 nm. We show experimental evidence of this force when the photonic structure is capable of making auto-oscillations and forced-oscillations. We measured peak displacements and velocities ranging from 2 up to 35 microns and 0.4 up to 2.1 mm/s with a power of 13 mW. Recent evidence showed that giant resonant light forces could induce average velocity values of 0.45 mm/s in microspheres embedded in water with 43 mW light power. PMID:24423985

  20. The bifoil photodyne: a photonic crystal oscillator

    NASA Astrophysics Data System (ADS)

    Lugo, J. E.; Doti, R.; Sanchez, N.; de La Mora, M. B.; Del Rio, J. A.; Faubert, J.

    2014-01-01

    Optical tweezers is an example how to use light to generate a physical force. They have been used to levitate viruses, bacteria, cells, and sub cellular organisms. Nonetheless it would be beneficial to use such force to develop a new kind of applications. However the radiation pressure usually is small to think in moving larger objects. Currently, there is some research investigating novel photonic working principles to generate a higher force. Here, we studied theoretically and experimentally the induction of electromagnetic forces in one-dimensional photonic crystals when light impinges on the off-axis direction. The photonic structure consists of a micro-cavity like structure formed of two one-dimensional photonic crystals made of free-standing porous silicon, separated by a variable air gap and the working wavelength is 633 nm. We show experimental evidence of this force when the photonic structure is capable of making auto-oscillations and forced-oscillations. We measured peak displacements and velocities ranging from 2 up to 35 microns and 0.4 up to 2.1 mm/s with a power of 13 mW. Recent evidence showed that giant resonant light forces could induce average velocity values of 0.45 mm/s in microspheres embedded in water with 43 mW light power.

  1. ScintSim1: A new Monte Carlo simulation code for transport of optical photons in 2D arrays of scintillation detectors.

    PubMed

    Mosleh-Shirazi, Mohammad Amin; Zarrini-Monfared, Zinat; Karbasi, Sareh; Zamani, Ali

    2014-01-01

    Two-dimensional (2D) arrays of thick segmented scintillators are of interest as X-ray detectors for both 2D and 3D image-guided radiotherapy (IGRT). Their detection process involves ionizing radiation energy deposition followed by production and transport of optical photons. Only a very limited number of optical Monte Carlo simulation models exist, which has limited the number of modeling studies that have considered both stages of the detection process. We present ScintSim1, an in-house optical Monte Carlo simulation code for 2D arrays of scintillation crystals, developed in the MATLAB programming environment. The code was rewritten and revised based on an existing program for single-element detectors, with the additional capability to model 2D arrays of elements with configurable dimensions, material, etc., The code generates and follows each optical photon history through the detector element (and, in case of cross-talk, the surrounding ones) until it reaches a configurable receptor, or is attenuated. The new model was verified by testing against relevant theoretically known behaviors or quantities and the results of a validated single-element model. For both sets of comparisons, the discrepancies in the calculated quantities were all <1%. The results validate the accuracy of the new code, which is a useful tool in scintillation detector optimization. PMID:24600168

  2. ScintSim1: A new Monte Carlo simulation code for transport of optical photons in 2D arrays of scintillation detectors

    PubMed Central

    Mosleh-Shirazi, Mohammad Amin; Zarrini-Monfared, Zinat; Karbasi, Sareh; Zamani, Ali

    2014-01-01

    Two-dimensional (2D) arrays of thick segmented scintillators are of interest as X-ray detectors for both 2D and 3D image-guided radiotherapy (IGRT). Their detection process involves ionizing radiation energy deposition followed by production and transport of optical photons. Only a very limited number of optical Monte Carlo simulation models exist, which has limited the number of modeling studies that have considered both stages of the detection process. We present ScintSim1, an in-house optical Monte Carlo simulation code for 2D arrays of scintillation crystals, developed in the MATLAB programming environment. The code was rewritten and revised based on an existing program for single-element detectors, with the additional capability to model 2D arrays of elements with configurable dimensions, material, etc., The code generates and follows each optical photon history through the detector element (and, in case of cross-talk, the surrounding ones) until it reaches a configurable receptor, or is attenuated. The new model was verified by testing against relevant theoretically known behaviors or quantities and the results of a validated single-element model. For both sets of comparisons, the discrepancies in the calculated quantities were all <1%. The results validate the accuracy of the new code, which is a useful tool in scintillation detector optimization. PMID:24600168

  3. Photonic crystal slab quantum cascade detector

    SciTech Connect

    Reininger, Peter Schwarz, Benedikt; Harrer, Andreas; Zederbauer, Tobias; Detz, Hermann; Maxwell Andrews, Aaron; Gansch, Roman; Schrenk, Werner; Strasser, Gottfried

    2013-12-09

    In this Letter, we demonstrate the design, fabrication, and characterization of a photonic crystal slab quantum cascade detector (PCS-QCD). By employing a specifically designed resonant cavity, the performance of the photodetector is improved in three distinct ways. The PCS makes the QCD sensitive to surface normal incident light. It resonantly enhances the photon lifetime inside the active zone, thus increasing the photocurrent significantly. And, the construction form of the device inherently decreases the noise. Finally, we compare the characteristics of the PCS-QCD to a PCS - quantum well infrared photodetector and outline the advantages for certain fields of applications.

  4. Analysis of photonic logic gates based on single hexagonal-lattice photonic crystal ring resonator

    NASA Astrophysics Data System (ADS)

    Jiang, Junzhen; Qiang, Zexuan; Xu, Xiaofu; Chen, Xiyao

    2011-01-01

    We devised a new configuration of optical logic gates based on a single hexagonal-lattice photonic crystal ring resonator (PCRR) composed of two-dimensional (2D) cylindrical silicon rods in air. The modal behavior of the proposed logic gates was comprehensively analyzed with a topology optimization technique based on the principle of beam interference and perturbation theory. It was then numerically verified by using a 2D finite-difference time-domain technique. The predictions have a very good agreement with the numerical results. This new single PCRR can really function as NOT and NOR gates. And the logic ``0'' and ``1'' of the hexagonal ring can be defined as less than 8% and greater than 86%, respectively, much better than earlier reported square-lattice results.

  5. Photonic crystal slab waveguides in moderate index contrast media: Generalized transverse Bragg waveguides

    NASA Astrophysics Data System (ADS)

    Burckel, David Bruce

    wavelength to period ratio. These optical results indicated a need for a deeper understanding of the confinement/guiding mechanisms in such waveguide structures. A simplification of the full 2-D problem to a more tractable "tilted 1-D" geometry led to the proposal of a new waveguide geometry, Generalized Transverse Bragg Waveguides (GTBW), as well as a new propagation mode characterized by spatial variation in both the transverse direction as well as the direction of propagation. GTBW demonstrate many of the same dispersion tunability traits exhibited in complete bandgap photonic crystal waveguides, under more modest fabrication demands, and moreover provide much insight into photonic crystal waveguide modes of all types. Generalized Transverse Bragg Waveguides are presented in terms of the standard physical properties associated with waveguides, including the dispersion relation, expressions for the spatial field profile, and the concepts of phase and group velocity. In addition, the proposal of at least one obvious application, semiconductor optical amplifiers, is offered.

  6. Breakdown of Bose-Einstein Distribution in Photonic Crystals

    PubMed Central

    Lo, Ping-Yuan; Xiong, Heng-Na; Zhang, Wei-Min

    2015-01-01

    In the last two decades, considerable advances have been made in the investigation of nano-photonics in photonic crystals. Previous theoretical investigations of photon dynamics were carried out at zero temperature. Here, we investigate micro/nano cavity photonics in photonic crystals at finite temperature. Due to photonic-band-gap-induced localized long-lived photon dynamics, we discover that cavity photons in photonic crystals do not obey Bose-Einstein statistical distribution. Within the photonic band gap and in the vicinity of the band edge, cavity photons combine the long-lived non-Markovain dynamics with thermal fluctuations together to form photon states that memorize the initial cavity state information. As a result, Bose-Einstein distribution is completely broken down in these regimes, even if the thermal energy is larger or much larger than the cavity detuning energy. In this investigation, a crossover phenomenon from equilibrium to nonequilibrium steady states is also revealed. PMID:25822135

  7. A plasma photonic crystal bandgap device

    NASA Astrophysics Data System (ADS)

    Wang, B.; Cappelli, M. A.

    2016-04-01

    A fully tunable plasma photonic crystal is used to control the propagation of free space electromagnetic waves in the S to X bands of the microwave spectrum. An array of discharge plasma tubes forms a simple square crystal structure with the individual plasma dielectric constant tuned through variation in the plasma density. We show, through simulations and experiments, that transverse electric mode bandgaps exist, arising from the positive and negative dielectric constant regimes of the plasma, and that the respective bandgap frequencies can be shifted through changing the dielectric constant by varying discharge current density.

  8. Focusing concave lens using photonic crystals with magnetic materials.

    PubMed

    Yang, Shieh-Yueh; Hong, Chin-Yih; Yang, Hong-Chang

    2006-04-01

    The guided modes lying in the upper gap-edge band in the photonic band structure of photonic crystals have negative values of refractive index. This feature generates many interesting optical phenomena, and some spectacular photonic devices such as focusing slabs have been developed. We report the design of a photonic-crystal, planoconcave lens for focusing incident parallel light, and theoretically analyze the chromatic aberrations for TM and TE modes. In addition to dielectric photonic crystals, the chromatic aberration of a magnetic photonic-crystal planoconcave lens was investigated because the magnetic permeability may also contribute to the periodic index contrast in photonic crystals, especially at long wavelengths. A significant difference was found in the chromatic aberration for a TM mode propagating in a dielectric than in a magnetic photonic-crystal planoconcave lens. PMID:16604781

  9. A tunable microwave plasma photonic crystal filter

    SciTech Connect

    Wang, B.; Cappelli, M. A.

    2015-10-26

    The integration of gaseous plasma elements into a microwave photonic crystal band gap cavity structure allows for active tuning of the device. An alumina rod array microwave photonic crystal waveguide resonator is simulated and characterized through finite difference time domain methods. A gaseous plasma element is integrated into the cavity structure and the effect of plasma density on the transmission properties of the structure is investigated. We show, through both simulations and experiments, that the permittivity of the plasma can be adjusted to shift the peak resonance to allow for both switching and tunability of transmission. The experimentally measured peak shifts in transmission are compared to those simulated and the electron density of the gaseous plasma element is calculated and compared to values determined from the measured discharge current density.

  10. A tunable microwave plasma photonic crystal filter

    NASA Astrophysics Data System (ADS)

    Wang, B.; Cappelli, M. A.

    2015-10-01

    The integration of gaseous plasma elements into a microwave photonic crystal band gap cavity structure allows for active tuning of the device. An alumina rod array microwave photonic crystal waveguide resonator is simulated and characterized through finite difference time domain methods. A gaseous plasma element is integrated into the cavity structure and the effect of plasma density on the transmission properties of the structure is investigated. We show, through both simulations and experiments, that the permittivity of the plasma can be adjusted to shift the peak resonance to allow for both switching and tunability of transmission. The experimentally measured peak shifts in transmission are compared to those simulated and the electron density of the gaseous plasma element is calculated and compared to values determined from the measured discharge current density.

  11. "Wandering" soliton in a nonlinear photonic crystal

    NASA Astrophysics Data System (ADS)

    Lysak, T. M.; Trofimov, V. A.

    2015-12-01

    On the basis of computer simulation, we demonstrate the possibility of a new type of "wandering" solitons implementation in nonlinear periodic layered structures. "Wandering" soliton moves across the layers, repeatedly changing its direction of motion due to the reflection from the photonic crystal (PC) boundaries with the ambient medium. The initial soliton is located inside a PC and occupies several of its layers. Its profile can be found as the solution of the corresponding nonlinear eigenvalue problem. "Wandering" solitons are formed as a result of a large perturbation of the wave vector, which leads to the soliton motion across photonic crystal layers. In the process of reflection from the boundary with the ambient medium, the soliton partly penetrates into the ambient medium at a depth equal to the width of several PC layers. A slow return of light energy, which previously left the PC, can take place at this moment.

  12. Absorption enhancement in graphene photonic crystal structures.

    PubMed

    Khaleque, Abdul; Hattori, Haroldo T

    2016-04-10

    Graphene, a single layer of carbon atoms arranged in a honeycomb lattice, is attracting significant interest because of its potential applications in electronic and optoelectronic devices. Although graphene exhibits almost uniform absorption within a large wavelength range, its interaction with light is weak. In this paper, the enhancement of the optical absorption in graphene photonic crystal structures is studied: the structure is modified by introducing scatterers and mirrors. It is shown that the absorption of the graphene photonic crystal structure can be enhanced about four times (nearly 40%) with respect to initial reference absorption of 9.8%. The study can be a useful tool for investigating graphene physics in different optical settings. PMID:27139857

  13. Transmission character of general function photonic crystals

    NASA Astrophysics Data System (ADS)

    Wu, Xiang-Yao; Zhang, Bo-Jun; Yang, Jing-Hai; Zhang, Si-Qi; Liu, Xiao-Jing; Wang, Jing; Ba, Nuo; Hua, Zhong; Yin, Xin-Guo

    2012-08-01

    In the paper, we present a new general function photonic crystals (GFPCs), whose refractive index of medium is a arbitrary function of space position. Unlike conventional photonic crystals (PCs), whose structure grows from two mediums A and B, with different constant refractive indexes na and nb. Based on the Fermat principle, we give the motion equations of light in one-dimensional GFPCs, and calculate its transfer matrix, which is different from the conventional PCs. We choose the linearity refractive index function for two mediums A and B, and find the transmissivity of one-dimensional GFPCs can be much larger or smaller than 1 for different slope linearity refractive index functions, which are different from the transmissivity of conventional PCs (its transmissivity is in the range of 0 and 1). Otherwise, we study the effect of different incident angles, the number of periods and optical thickness on the transmissivity, and obtain some new results different from the conventional PCs.

  14. Nonreciprocal photonic crystal add-drop filter

    SciTech Connect

    Tao, Keyu; Xiao, Jun-Jun; Yin, Xiaobo

    2014-11-24

    We present a versatile add-drop integrated photonic filter (ADF) consisting of nonreciprocal waveguides in which the propagation of light is restricted in one predetermined direction. With the bus and add/drop waveguides symmetrically coupled through a cavity, the four-port device allows each individual port to add and/or drop a signal of the same frequency. The scheme is general and we demonstrate the nonreciprocal ADF with magneto-optical photonic crystals. The filter is immune to waveguide defects, allowing straightforward implementation of multi-channel ADFs by cascading the four-port designs. The results should find applications in wavelength-division multiplexing and related integrated photonic techniques.

  15. Metallic photonic crystals at optical wavelengths

    NASA Astrophysics Data System (ADS)

    El-Kady, I.; Sigalas, M. M.; Biswas, R.; Ho, K. M.; Soukoulis, C. M.

    2000-12-01

    We theoretically study three-dimensional metallic photonic-band-gap (PBG) materials at near-infrared and optical wavelengths. Our main objective is to find the importance of absorption in the metal and the suitability of observing photonic band gaps in this structure. For that reason, we study simple cubic structures and the metallic scatterers are either cubes or interconnected metallic rods. Several different metals have been studied (aluminum, gold, copper, and silver). Copper gives the smallest absorption and aluminum is more absorptive. The isolated metallic cubes are less lossy than the connected rod structures. The calculations suggest that isolated copper scatterers are very attractive candidates for the fabrication of photonic crystals at the optical wavelengths.

  16. Photonic crystal fibres in biomedical investigations

    SciTech Connect

    Skibina, Yu S; Tuchin, Valerii V; Beloglazov, V I; Shteinmaeer, G; Betge, I L; Wedell, R; Langhoff, N

    2011-04-30

    The state of the art in the field of design and study of photonic crystal fibres for biomedical applications is considered and some original results recently obtained by the authors are presented. Optical properties of the fibres that offer prospects of their wide application as biological sensors, 'labs-on-a-chip', and facilities of electromagnetic radiation control in a wide range of wavelengths aimed at designing novel biomedical instrumentation are considered (optical technologies in biophysics and medicine)

  17. Optical microfiber-based photonic crystal cavity

    NASA Astrophysics Data System (ADS)

    Yu, Yang; Sun, Yi-zhi; Andrews, Steve; Li, Zhi-yuan; Ding, Wei

    2016-01-01

    Using a focused ion beam milling technique, we fabricate broad stop band (∼10% wide) photonic crystal (PhC) cavities in adiabatically-tapered silica fibers. Abrupt structural design of PhC mirrors efficiently reduces radiation loss, increasing the cavity finesse to ∼7.5. Further experiments and simulations verify that the remaining loss is mainly due to Ga ion implantation. Such a microfiber PhC cavity probably has potentials in many light-matter interaction applications.

  18. Tunable Mach-Zehnder interferometer in a two-dimensional photonic crystal with liquid crystal infiltration

    NASA Astrophysics Data System (ADS)

    Chen, Xiyao; Dong, Xinyong; Hu, Juan Juan; Shum, Ping; Wang, Yufei; Qiu, Yishen; Lin, Guimin; Hong, Hailian

    2007-09-01

    A theoretical model of a tunable Mach-Zehnder interferometer (TMZI) constructed in a 2D photonic crystal is proposed. The 2D PhC consists of a square lattice of cylindric air holes in silicon. The TMZI includes two mirrors and two splitters. Lights propagate between them employing self-collimation effect. The two interferometer branches have different path lengths. Parts of the longer branch are infiltrated with a kind of liquid crystal (LC) whose ordinary and extraordinary refractive indices are 1.522 and 1.706, respectively. The transmission spectra at two MZI output ports are in the shape of sinusoidal curves and have a uniform peak spacing 0.0017c/a in the frequency range from 0.26c/a to 0.27c/a. When the effective refractive index n eff of the liquid crystal is increased from 1.522 to 1.706, the peaks shift to the lower frequencies over 0.0017c/a while the peak spacing is almost kept unchanged. So this TMZI can work as a tunble power splitter or an optical switch. For the central operating wavelength around 1550nm, its dimensions are only about tens of microns. So this device may be applied to photonic integrated circuits.

  19. Transition from photonic crystals to dielectric metamaterials: A phase diagram and the order parameter

    NASA Astrophysics Data System (ADS)

    Rybin, Mikhail V.; Filonov, Dmitry S.; Samusev, Kirill B.; Belov, Pavel A.; Kivshar, Yuri S.; Limonov, Mikhail F.

    2016-04-01

    We introduce a concept of phase transitions between photonic crystals and all-dielectric metamaterials suggesting a phase diagram that places two classes of such artificial structures on a common parameter plane.1 We consider photonic crystals and all-dielectric metamaterials composed of the similar structural elements and arranged in the similar geometry of a two-dimensional (2D) square lattice of dielectric cylinders of large dielectric permittivity. Such structures can display negative magnetic permeability in the TE-polarization due to the Mie resonance that occurs below the lowest Bragg resonance.2 We define a point of transition from photonic crystals to all-dielectric metamaterials as a point when the lowest Mie resonance splits from the lowest Bragg resonance creating the lowest photonic gap. Based on the numerical results, we construct the phase diagram photonic crystals - all- dielectric metamaterials for the 2D square lattice of circular rods for the TE polarization. We have verified our theoretical concept experimentally by engineering a "metacrystal" composed of glass tubes filled with water forming a 2D square lattice with a variable lattice constant.

  20. High-resistance liquid-crystal lens array for rotatable 2D/3D autostereoscopic display.

    PubMed

    Chang, Yu-Cheng; Jen, Tai-Hsiang; Ting, Chih-Hung; Huang, Yi-Pai

    2014-02-10

    A 2D/3D switchable and rotatable autostereoscopic display using a high-resistance liquid-crystal (Hi-R LC) lens array is investigated in this paper. Using high-resistance layers in an LC cell, a gradient electric-field distribution can be formed, which can provide a better lens-like shape of the refractive-index distribution. The advantages of the Hi-R LC lens array are its 2D/3D switchability, rotatability (in the horizontal and vertical directions), low driving voltage (~2 volts) and fast response (~0.6 second). In addition, the Hi-R LC lens array requires only a very simple fabrication process. PMID:24663563

  1. Fully confined photonic band gap and guided modes in a two-dimensional photonic crystal slab

    SciTech Connect

    Chow, K.C.; Lin, S.Y.; Johnson, S.G.; Villeneuve, P.R.; Joannopoulos, J.D.

    1999-12-15

    A new two-dimensional photonic crystal (2D PC) slab structure was created with a full three-dimensional light confinement. Guided modes with broad bandwidth and high transmission within the band gap are also observed. As an optical analog to electronic crystals, PC promises a revolution in the photonic world similar to the electronic revolution created by the electronic band gap engineering in semiconductor. 2D PC has an advantage of being easier to fabricate at optical wavelength ({lambda}) comparing with 3D PC. However, the light leakage in the vertical direction has been the main problem for using 2D PC in opto-electronic application. In this study, the authors solve this problem by combining traditional 2D PC with strong vertical index guiding between the waveguide layer (GaAs) and the cladding layer (Al{sub x}O{sub y}). A set of triangular lattice holes 2D PC's were fabricated with lattice constant a=460nm, hole diameter (d=0.6a) and waveguide layer thickness (t = 0.5a). Those parameters were chosen to maximize the TE photonic band gap (PBG) around {lambda} = 1.55{micro}m. The depth of etched holes is {approximately}0.6{micro}m and the 2{micro}m thick Al{sub x}O{sub y} cladding layer is obtained by thermal oxidation of Al{sub 0.9}Ga{sub 0.1}As. PC waveguides were also created by introducing line defects along {Gamma}K direction. The authors perform transmission measurement by coupling light to PC with 3{micro}m wide waveguides which extends {approximately}0.6mm on both sides of PC. An aspheric lens with NA = 0.4 is used to focus the collimated light from tunable diode laser into the input waveguide. Another identical lens is used to collect the transmitted light and focus to an infrared (IR) camera and a calibrated photo-detector with a beamsplitter. The Gaussian waveguide mode indicates that the signal detected by the photodetector comes only from the light interacting with PC and propagating along the waveguide. The absolute transmittance is obtained by

  2. Two-dimensional plasma photonic crystals in dielectric barrier discharge

    SciTech Connect

    Fan Weili; Dong Lifang; Zhang Xinchun

    2010-11-15

    A series of two-dimensional plasma photonic crystals have been obtained by filaments' self-organization in atmospheric dielectric barrier discharge with two water electrodes, which undergo the transition from square to square superlattice and finally to the hexagon. The spatio-temporal behaviors of the plasma photonic crystals in nanosecond scale have been studied by optical method, which show that the plasma photonic crystal is actually an integration of different transient sublattices. The photonic band diagrams of the transverse electric (TE) mode and transverse magnetic mode for each sublattice of these plasma photonic crystals have been investigated theoretically. A wide complete band gap is formed in the hexagonal plasma photonic crystal with the TE mode. The changes of the band edge frequencies and the band gap widths in the evolvement of different structures are studied. A kind of tunable plasma photonic crystal which can be controlled both in space and time is suggested.

  3. Stitching 2D polymeric layers into flexible interpenetrated metal-organic frameworks within single crystals.

    PubMed

    Zhang, Zi-Xuan; Ding, Ni-Ni; Zhang, Wen-Hua; Chen, Jin-Xiang; Young, David J; Hor, T S Andy

    2014-04-25

    A 2D coordination polymer prepared with bulky diethylformamide solvates exhibits channels which allow dipyridyl bridging ligands to diffuse into the crystal lattice. The absorbed dipyridyls thread through the pores of one layer and substitute the surface diethylformamide molecules on the neighboring layers to stitch alternate layers to form flexible interpenetrated metal-orgaic frameworks. The threading process also results in exchange of the bulky diethylformamide solvates for aqua to minimize congestion and, more strikingly, forces the slippage of two-dimensional layers, while still maintaining crystallinity. PMID:24692130

  4. Wavelength division demultiplexing with photonic crystal self-collimation interference

    NASA Astrophysics Data System (ADS)

    Wang, Yufei; Qiu, Yishen; Chen, Xiyao; Lin, Guimin; Hong, Hailian

    2007-11-01

    A theoretical model of wavelength division demultiplexer (WDD), which is based on an asymmetric Mach-Zehnder interferometer (AMZI) constructed in a two-dimensional photonic crystal (2D PhC), is proposed and numerically demonstrated. The 2D PhC consists of a square lattice of cylindric air holes in silicon. The AMZI includes two mirrors and two splitters. Lights propagate between them employing self-collimation effect. The two interferometer branches have different path lengths. By using the finite-difference time-domain method, the calculation results show that the transmission spectras at two AMZI output ports are in the shape of sinusoidal curves and have a uniform peak spacing in the frequency range from 0.26c/a to 0.27c/a. When the path length of the longer branch is increased and the shorter one is fixed, the peaks shift to the lower frequencies and the peak spacing decreases nonlinearly. Consequently, the transmission can be designed to meet various application demands by changing the length difference between the two branches. For the dimensions of the WDD are about tens of operating wavelengths, this PhC WDD may be applied in future photonic integrated circuits.

  5. Switchable tunneling mode for cylindrical photonic quantum well consisting of photonic crystals containing liquid crystal

    NASA Astrophysics Data System (ADS)

    Hu, C. A.; Yang, S. L.; Yang, T. J.

    2013-06-01

    We propose a cylindrical photonic quantum well made of photonic crystals containing liquid crystals, the properties of which are theoretically calculated and investigated by the transfer matrix method in the cylindrical symmetry system. Liquid crystals are introduced into the photonic quantum well structure as tunable defect layers. When the liquid crystals are pseudo-isotropic state and the azimuthal mode order of incident waves are m=0, there were two pass-bands around certain wavelength. When the liquid crystals are homeotropic state, the reflectance of pass-band at shorter wavelength decreases from 0.75 to 0.05 in the TM mode, but the reflectance does not change in the TE mode. When mode order m=1 and the liquid crystals are pseudo-isotropic state, the reflectance of defect mode stayed the same as m=0. However, the result is reversed while the phase of liquid crystals change from pseudo-isotropic to homeotropic state. The reflectance is the same as in the TM mode, but that in the TE mode decreases substantially from 0.75 to 0.05. The application of our structure to switching device is highly potential.

  6. 2D and 3D Histioid Disclination Networks in Liquid Crystals

    NASA Astrophysics Data System (ADS)

    Jiang, Miao; Guo, Yubing; Lavrentovich, Oleg; Wei, Qi-Huo

    Topological defects and disclination lines are of both fundamental interest and practical importance. In this paper, we will show that periodic/non-periodic 2D/3D networks of disclination lines can be created in nematic liquid crystal cells by setting well-designed alignment patterns at the top and bottom substrate surfaces. The desired complex patterns of liquid crystal molecular alignments at the substrates are obtained using a projection photoalignment technique based on plasmonic metamasks. The designs of alignment patterns and their resulting disclination line networks will be presented. These designable topological networks represent a new kind of artificial materials which could be of useful for directing colloidal and molecular assembly. National Science Foundation CMMI-1436565.

  7. Fabrication of two-dimensional metallic photonic crystals using laser interference ablation

    NASA Astrophysics Data System (ADS)

    Pang, Zhaoguang; Zhang, Xinping; Liu, Hongmei; Zhai, Tianrui

    2012-11-01

    We demonstrate the fabrication of two-dimensional (2D) metallic photonic crystals (MPCs) based on colloidal gold nanoparticles, where laser interference ablation combining subsequent high temperature annealing is employed for the construction of 2D gold nano-dot arrays in square lattices. The microscopic and spectroscopic properties of the 2-D MPCs are systematically characterized by the scanning electron microscope and the angle-resolved optical extinction spectroscopic measurements, the strong coupling between the waveguide resonance mode and the particle plasmon resonance of the MPCs imply the success of the fabrication method, which show potential applications in optoelectronic devices and sensors.

  8. Photonic crystals as templates and active devices for cellular and molecular interactions

    NASA Astrophysics Data System (ADS)

    Sonek, G. J.

    2005-04-01

    Photonic crystals are emerging as an important class of engineered nanophotonic devices that possess unique optical properties and which can also provide textured surfaces for the study and control of cellular and molecular interactions. From among the many types of photonic crystal structures, two-dimensional (2D) and planar (slab) photonic crystals are the most attractive because of their ability to support guided-wave and active optical devices in semiconductor and polymer materials, serve as templates for device replication, and interface with colloidal and nanoparticle systems. This paper reports on the results of modeling and design efforts that show how 2d and slab silicon photonic crystals, based on their in-plane optical waveguiding and out-of-plane radiation properties, might be used to probe surface-bound cells and molecules or perform localized spectroscopy. The results of a parametric analysis show that photonic crystals comprised of high-index contrast materials (e.g. Si, air) are sensitive to geometric and material factors, potentially making them an effective medium to study molecular and cellular interactions critical to a number of biotechnological applications

  9. A Photonic Crystal Protein Hydrogel Sensor for Candida albicans.

    PubMed

    Cai, Zhongyu; Kwak, Daniel H; Punihaole, David; Hong, Zhenmin; Velankar, Sachin S; Liu, Xinyu; Asher, Sanford A

    2015-10-26

    We report two-dimensional (2D) photonic crystal (PC) sensing materials that selectively detect Candida albicans (C. albicans). These sensors utilize Concanavalin A (Con A) protein hydrogels with a 2D PC embedded on the Con A protein hydrogel surface, that multivalently and selectively bind to mannan on the C. albicans cell surface to form crosslinks. The resulting crosslinks shrink the Con A protein hydrogel, reduce the 2D PC particle spacing, and blue-shift the light diffracted from the PC. The diffraction shifts can be visually monitored, measured with a spectrometer, or determined from the Debye diffraction ring diameter. Our unoptimized hydrogel sensor has a detection limit of around 32 CFU/mL for C. albicans. This sensor distinguishes between C. albicans and those microbes devoid of cell-surface mannan such as the gram-negative bacterium E. coli. This sensor provides a proof-of-concept for utilizing recognition between lectins and microbial cell surface carbohydrates to detect microorganisms in aqueous environments. PMID:26480336

  10. CMOS compatible high-Q photonic crystal nanocavity fabricated with photolithography on silicon photonic platform

    PubMed Central

    Ooka, Yuta; Tetsumoto, Tomohiro; Fushimi, Akihiro; Yoshiki, Wataru; Tanabe, Takasumi

    2015-01-01

    Progress on the fabrication of ultrahigh-Q photonic-crystal nanocavities (PhC-NCs) has revealed the prospect for new applications including silicon Raman lasers that require a strong confinement of light. Among various PhC-NCs, the highest Q has been recorded with silicon. On the other hand, microcavity is one of the basic building blocks in silicon photonics. However, the fusion between PhC-NCs and silicon photonics has yet to be exploited, since PhC-NCs are usually fabricated with electron-beam lithography and require an air-bridge structure. Here we show that a 2D-PhC-NC fabricated with deep-UV photolithography on a silica-clad silicon-on-insulator (SOI) structure will exhibit a high-Q of 2.2 × 105 with a mode-volume of ~1.7(λ/n)3. This is the highest Q demonstrated with photolithography. We also show that this device exhibits an efficient thermal diffusion and enables high-speed switching. The demonstration of the photolithographic fabrication of high-Q silica-clad PhC-NCs will open possibility for mass-manufacturing and boost the fusion between silicon photonics and CMOS devices. PMID:26086849

  11. CMOS compatible high-Q photonic crystal nanocavity fabricated with photolithography on silicon photonic platform.

    PubMed

    Ooka, Yuta; Tetsumoto, Tomohiro; Fushimi, Akihiro; Yoshiki, Wataru; Tanabe, Takasumi

    2015-01-01

    Progress on the fabrication of ultrahigh-Q photonic-crystal nanocavities (PhC-NCs) has revealed the prospect for new applications including silicon Raman lasers that require a strong confinement of light. Among various PhC-NCs, the highest Q has been recorded with silicon. On the other hand, microcavity is one of the basic building blocks in silicon photonics. However, the fusion between PhC-NCs and silicon photonics has yet to be exploited, since PhC-NCs are usually fabricated with electron-beam lithography and require an air-bridge structure. Here we show that a 2D-PhC-NC fabricated with deep-UV photolithography on a silica-clad silicon-on-insulator (SOI) structure will exhibit a high-Q of 2.2 × 10(5) with a mode-volume of ~ 1.7(λ/n)(3). This is the highest Q demonstrated with photolithography. We also show that this device exhibits an efficient thermal diffusion and enables high-speed switching. The demonstration of the photolithographic fabrication of high-Q silica-clad PhC-NCs will open possibility for mass-manufacturing and boost the fusion between silicon photonics and CMOS devices. PMID:26086849

  12. Zero-n gap in one dimensional photonic crystal

    NASA Astrophysics Data System (ADS)

    Chobey, Mahesh K.; Suthar, B.

    2016-05-01

    We study a one-dimensional (1-D) photonic crystal composed of Double Positive (DPS) and Double Negative (DNG) material. This structure shows omnidirectional photonic bandgap, which is insensitive with angle of incidence and polarization. To study the effect of structural parameters on the photonic band structure, we have calculated photonic band gap at various thicknesses of DPS and DNG.

  13. Raman cooling in silicon photonic crystals

    NASA Astrophysics Data System (ADS)

    Chen, Yin-Chung; Bahl, Gaurav

    2016-03-01

    Laser cooling of solids can be achieved through various photon up-conversion processes including anti-Stokes photoluminescence and anti-Stokes light scattering. While it has been shown that cooling using photoluminescence-based methods can achieve efficiency comparable to that of thermoelectric cooling, the reliance on specific transitions of the rare-earth dopants limits material choice. Light scattering, on the other hand, occurs in all materials, and has the potential to enable cooling in most materials. We show that by engineering the photonic density of states of a material, one can suppress the Stokes process, and enhance the anti-Stokes radiation. We employ the well-known diamond-structured photonic crystal patterned in crystalline silicon to demonstrate theoretically that when operating within a high transparency regime, the net energy removal rate from phonon annihilation can overcome the optical absorption. The engineered photonic density of states can thus enable simultaneous cooling of all Raman-active phonon modes and the net cooling of the solid.

  14. Evidence for a New Intermediate Phase in a Strongly Correlated 2D System near Wigner Crystallization

    NASA Astrophysics Data System (ADS)

    Gao, Xuan; Qiu, Richard; Goble, Nicholas; Serafin, Alex; Yin, Liang; Xia, Jian-Sheng; Sullivan, Neil; Pfeiffer, Loren; West, Ken

    How the two dimensional (2D) quantum Wigner crystal (WC) transforms into the metallic liquid phase remains an outstanding problem in physics. In theories considering the 2D WC to liquid transition in the clean limit, it was suggested that a number of intermediate phases might exist. We have studied the transformation between the metallic fluid phase and the low magnetic field reentrant insulating phase (RIP) which was interpreted as due to the WC [Qiu et al., PRL 108, 106404 (2012)], in a strongly correlated 2D hole system in GaAs quantum well with large interaction parameter rs (~20-30) and high mobility. Instead of a sharp transition, we found that increasing density (or lowering rs) drives the RIP into a state where the incipient RIP coexists with Fermi liquid. This apparent mixture phase intermediate between Fermi liquid and WC also exhibits a non-trivial temperature dependent resistivity behavior which can be qualitatively understood by the reversed melting of WC in the mixture, in analogy to the Pomeranchuk effect in the solid-liquid mixture of Helium-3. X.G. thanks NSF (DMR-0906415) for supporting work at CWRU. Experiments at the NHMFL High B/T Facility were supported by NSF Grant 0654118 and the State of Florida. L.P. thanks the Gordon and Betty Moore Foundation and NSF MRSEC (DMR-0819860) for support.

  15. Slab photonic crystals with dimer colloid bases

    SciTech Connect

    Riley, Erin K.; Liddell Watson, Chekesha M.

    2014-06-14

    The photonic band gap properties for centered rectangular monolayers of asymmetric dimers are reported. Colloids in suspension have been organized into the phase under confinement. The theoretical model is inspired by the range of asymmetric dimers synthesized via seeded emulsion polymerization and explores, in particular, the band structures as a function of degree of lobe symmetry and degree of lobe fusion. These parameters are varied incrementally from spheres to lobe-tangent dimers over morphologies yielding physically realizable particles. The work addresses the relative scarcity of theoretical studies on photonic crystal slabs with vertical variation that is consistent with colloidal self-assembly. Odd, even and polarization independent gaps in the guided modes are determined for direct slab structures. A wide range of lobe symmetry and degree of lobe fusion combinations having Brillouin zones with moderate to high isotropy support gaps between odd mode band indices 3-4 and even mode band indices 1-2 and 2-3.

  16. Photonic crystal devices formed by a charged-particle beam

    DOEpatents

    Lin, Shawn-Yu; Koops, Hans W. P.

    2000-01-01

    A photonic crystal device and method. The photonic crystal device comprises a substrate with at least one photonic crystal formed thereon by a charged-particle beam deposition method. Each photonic crystal comprises a plurality of spaced elements having a composition different from the substrate, and may further include one or more impurity elements substituted for spaced elements. Embodiments of the present invention may be provided as electromagnetic wave filters, polarizers, resonators, sources, mirrors, beam directors and antennas for use at wavelengths in the range from about 0.2 to 200 microns or longer. Additionally, photonic crystal devices may be provided with one or more electromagnetic waveguides adjacent to a photonic crystal for forming integrated electromagnetic circuits for use at optical, infrared, or millimeter-wave frequencies.

  17. Macroscopic response in active nonlinear photonic crystals.

    PubMed

    Alagappan, Gandhi; John, Sajeev; Li, Er Ping

    2013-09-15

    We derive macroscopic equations of motion for the slowly varying electric field amplitude in three-dimensional active nonlinear optical nanostructures. We show that the microscopic Maxwell equations and polarization dynamics can be simplified to a macroscopic one-dimensional problem in the direction of group velocity. For a three-level active material, we derive the steady-state equations for normal mode frequency, threshold pumping, nonlinear Bloch mode amplitude, and lasing in photonic crystals. Our analytical results accurately recapture the results of exact numerical methods. PMID:24104802

  18. Hexagonal photonic crystal waveguide based on barium titanate thin films

    NASA Astrophysics Data System (ADS)

    Li, Jianheng; Liu, Zhifu; Wessels, Bruce W.; Tu, Yongming; Ho, Seng-Tiong; Joshi-Imre, Alexandra; Ocola, Leonidas E.

    2011-03-01

    The simulation, fabrication and measurement of nonlinear photonic crystals (PhCs) with hexagonal symmetry in epitaxial BaTiO3 were investigated. The optical transmission properties of a PhC were simulated by a 2-D finite-difference time domain (FDTD) method. A complete bandgap exists for both the TE and TM optical modes. The fabricated PhC has a well-defined stop band over the spectral region of 1525 to 1575 nm. A microcavity structure was also fabricated by incorporation of a line defect in the PhC. Transmission of the microcavity structure over the spectral region from 1456 to 1584nm shows a well-defined 5 nm wide window at 1495nm. Simulations indicate that the phase velocity matched PhC microcavity device of 0.5 mm long can potentially serve as modulator with a 3 dB bandwidth of 4 THz.

  19. Dual negative refraction in a two dimension square photonic crystal

    NASA Astrophysics Data System (ADS)

    Derbali, J.; AbdelMalek, F.

    2015-09-01

    Dual refraction effect based on the overlapping bands in a two dimensional (2D) photonic crystal (PhC) is demonstrated. The PhC consists of alumina rods with a dielectric constant ε=8.9, arranged in a square lattice in air. To disperse light which has special excitation frequency and a specific incident angle, by this PhC we optimize his structural parameters such as the radius of dielectric rods). It is shown that two focusing phenomena are formed in the PhC image plan; the degeneracy of modes can be applied to realize optical interference and wave front division. The simulation results are obtained by employing the PWM for analyzing bands structure and the finite-difference time-domain (FDTD) to predict the evolution of the electric fields.

  20. Broadband photon-photon interactions mediated by cold atoms in a photonic crystal fiber

    PubMed Central

    Litinskaya, Marina; Tignone, Edoardo; Pupillo, Guido

    2016-01-01

    We demonstrate theoretically that photon-photon attraction can be engineered in the continuum of scattering states for pairs of photons propagating in a hollow-core photonic crystal fiber filled with cold atoms. The atoms are regularly spaced in an optical lattice configuration and the photons are resonantly tuned to an internal atomic transition. We show that the hard-core repulsion resulting from saturation of the atomic transitions induces bunching in the photonic component of the collective atom-photon modes (polaritons). Bunching is obtained in a frequency range as large as tens of GHz, and can be controlled by the inter-atomic separation. We provide a fully analytical explanation for this phenomenon by proving that correlations result from a mismatch of the quantization volumes for atomic excitations and photons in the continuum. Even stronger correlations can be observed for in-gap two-polariton bound states. Our theoretical results use parameters relevant for current experiments and suggest a simple and feasible way to induce interactions between photons. PMID:27170160

  1. Broadband photon-photon interactions mediated by cold atoms in a photonic crystal fiber

    NASA Astrophysics Data System (ADS)

    Litinskaya, Marina; Tignone, Edoardo; Pupillo, Guido

    2016-05-01

    We demonstrate theoretically that photon-photon attraction can be engineered in the continuum of scattering states for pairs of photons propagating in a hollow-core photonic crystal fiber filled with cold atoms. The atoms are regularly spaced in an optical lattice configuration and the photons are resonantly tuned to an internal atomic transition. We show that the hard-core repulsion resulting from saturation of the atomic transitions induces bunching in the photonic component of the collective atom-photon modes (polaritons). Bunching is obtained in a frequency range as large as tens of GHz, and can be controlled by the inter-atomic separation. We provide a fully analytical explanation for this phenomenon by proving that correlations result from a mismatch of the quantization volumes for atomic excitations and photons in the continuum. Even stronger correlations can be observed for in-gap two-polariton bound states. Our theoretical results use parameters relevant for current experiments and suggest a simple and feasible way to induce interactions between photons.

  2. Broadband photon-photon interactions mediated by cold atoms in a photonic crystal fiber.

    PubMed

    Litinskaya, Marina; Tignone, Edoardo; Pupillo, Guido

    2016-01-01

    We demonstrate theoretically that photon-photon attraction can be engineered in the continuum of scattering states for pairs of photons propagating in a hollow-core photonic crystal fiber filled with cold atoms. The atoms are regularly spaced in an optical lattice configuration and the photons are resonantly tuned to an internal atomic transition. We show that the hard-core repulsion resulting from saturation of the atomic transitions induces bunching in the photonic component of the collective atom-photon modes (polaritons). Bunching is obtained in a frequency range as large as tens of GHz, and can be controlled by the inter-atomic separation. We provide a fully analytical explanation for this phenomenon by proving that correlations result from a mismatch of the quantization volumes for atomic excitations and photons in the continuum. Even stronger correlations can be observed for in-gap two-polariton bound states. Our theoretical results use parameters relevant for current experiments and suggest a simple and feasible way to induce interactions between photons. PMID:27170160

  3. Young's double-slit experiment in photonic crystals

    SciTech Connect

    Zhang, Lei; Koschny, Thomas; Soukoulis, Costas M.

    2012-10-01

    We present an experimental and numerical study of the transmission of a photonic crystal perforated by two sub-wavelength slits, separated by two wavelengths.The experimental near-field image of the double-slit design of the photonic crystal shows an interference pattern, which is analogous to Young’s experiment. This interference arises as a consequence of the excitation of surface states of the photonic crystals and agrees very well with the simulations.

  4. Back focal plane imaging spectroscopy of photonic crystals

    NASA Astrophysics Data System (ADS)

    Wagner, Rebecca; Heerklotz, Lars; Kortenbruck, Nikolai; Cichos, Frank

    2012-08-01

    Back focal plane imaging spectroscopy is introduced to record angle resolved emission spectra of 3-dimensional colloidal photonic crystals. The auto-fluorescence of the colloids is used to quickly map the photonic band structure up to 72 % of the solid angle of a semisphere with the help of a high numerical aperture objective. Local excitation provides spatially resolved information on the photonic crystal's optical properties. The obtained fractional density of states allows direct conclusions on the crystal's stacking faults or defects.

  5. Local Field Modulation Induced Three-Order Upconversion Enhancement: Combining Surface Plasmon Effect and Photonic Crystal Effect.

    PubMed

    Yin, Ze; Li, Hang; Xu, Wen; Cui, Shaobo; Zhou, Donglei; Chen, Xu; Zhu, Yongsheng; Qin, Guanshi; Song, Hongwei

    2016-04-01

    A 2D surface plasmon photonic crystal (SPPC) is achieved by implanting gold nanorods onto the periodic surface apertures of the poly(methyl methacrylate) (PMMA) opal photonic crystals. On the surface of the SPPC, the overall upconversion luminescence intensity of NaYF4 :Yb(3+) , Er(3+) under 980 nm excitation is improved more than 10(3) fold. The device is easily shifted to a transparent flexible substrate, applied to flexible displays. PMID:26833556

  6. Biomimetic Photonic Crystals based on Diatom Algae Frustules

    NASA Astrophysics Data System (ADS)

    Mishler, Jonathan; Alverson, Andrew; Herzog, Joseph

    2015-03-01

    Diatom algae are unicellular, photosynthetic microorganisms with a unique external shell known as a frustule. Frustules, which are composed of amorphous silica, exhibit a unique periodic nano-patterning, distinguishing diatoms from other types of phytoplankton. Diatoms have been studied for their distinctive optical properties due to their resemblance of photonic crystals. In this regard, diatoms are not only considered for their applications as photonic crystals, but also for their use as biomimetic templates for artificially fabricated photonic crystals. Through the examination and measurement of the physical characteristics of many scanning electron microscope (SEM) images of diatom frustules, a biomimetic photonic crystal derived from diatom frustules can be recreated and modeled with the finite element method. In this approach, the average geometries of the diatom frustules are used to recreate a 2-dimensional photonic crystal, after which the electric field distribution and optical transmission through the photonic crystal are both measured. The optical transmission is then compared to the transmission spectra of a regular hexagonal photonic crystal, revealing the effects of diatom geometry on their optical properties. Finally, the dimensions of the photonic crystal are parametrically swept, allowing for further control over the transmission of light through the photonic crystal.

  7. Engineering and characterizing light-matter interactions in photonic crystals

    NASA Astrophysics Data System (ADS)

    Brzezinski, Andrew

    Photonic crystals can affect the behavior of visible light, and other electromagnetic waves, in ways that are not possible by other means. The propagation of photons can be completely forbidden or the light can be made to follow a well-defined path. Fluorescent emission can be enhanced for some wavelengths or completely shut off for others, and it is possible to do all this simultaneously in a single structure. However, photonic crystals are very difficult to fabricate as they require precision patterning at sub-micron length scales. This fabrication difficulty has resulted in many of the potential applications for photonic crystals to currently be unrealized. Similarly, there is an abundance of opportunities to explore the workings of photonic crystals and also to develop exciting new methods for their fabrication. The content of this dissertation explores some methods for fabricating photonic crystals, including direct laser writing, interference lithography, colloidal deposition, and chemical vapor deposition. The angle-resolved characterization of photonic crystals is performed on fluorescent photonic crystals that exhibit uniquely photonic effects, which are explained with a simplified model of the electromagnetic wave-functions. Another model is shown to well-explain the emission from fluorescent photonic crystals that are not of sufficient quality to exhibit truly photonic effects. The ability to perform angle-resolved optical characterization is improved with a commercial 4-circle diffractometer. A method to determination the resulting structure of conformal deposition processes proves useful as a tool for the design, modeling, and characterization of photonic crystals. Finally, attempts are made to radically alter the emission of light from rare earth emitters embedded inside photonic crystals.

  8. Polymorphism, crystal nucleation and growth in the phase-field crystal model in 2D and 3D.

    PubMed

    Tóth, Gyula I; Tegze, György; Pusztai, Tamás; Tóth, Gergely; Gránásy, László

    2010-09-15

    We apply a simple dynamical density functional theory, the phase-field crystal (PFC) model of overdamped conservative dynamics, to address polymorphism, crystal nucleation, and crystal growth in the diffusion-controlled limit. We refine the phase diagram for 3D, and determine the line free energy in 2D and the height of the nucleation barrier in 2D and 3D for homogeneous and heterogeneous nucleation by solving the respective Euler-Lagrange (EL) equations. We demonstrate that, in the PFC model, the body-centered cubic (bcc), the face-centered cubic (fcc), and the hexagonal close-packed structures (hcp) compete, while the simple cubic structure is unstable, and that phase preference can be tuned by changing the model parameters: close to the critical point the bcc structure is stable, while far from the critical point the fcc prevails, with an hcp stability domain in between. We note that with increasing distance from the critical point the equilibrium shapes vary from the sphere to specific faceted shapes: rhombic dodecahedron (bcc), truncated octahedron (fcc), and hexagonal prism (hcp). Solving the equation of motion of the PFC model supplied with conserved noise, solidification starts with the nucleation of an amorphous precursor phase, into which the stable crystalline phase nucleates. The growth rate is found to be time dependent and anisotropic; this anisotropy depends on the driving force. We show that due to the diffusion-controlled growth mechanism, which is especially relevant for crystal aggregation in colloidal systems, dendritic growth structures evolve in large-scale isothermal single-component PFC simulations. An oscillatory effective pair potential resembling those for model glass formers has been evaluated from structural data of the amorphous phase obtained by instantaneous quenching. Finally, we present results for eutectic solidification in a binary PFC model. PMID:21386517

  9. Polymorphism, crystal nucleation and growth in the phase-field crystal model in 2D and 3D

    NASA Astrophysics Data System (ADS)

    Tóth, Gyula I.; Tegze, György; Pusztai, Tamás; Tóth, Gergely; Gránásy, László

    2010-09-01

    We apply a simple dynamical density functional theory, the phase-field crystal (PFC) model of overdamped conservative dynamics, to address polymorphism, crystal nucleation, and crystal growth in the diffusion-controlled limit. We refine the phase diagram for 3D, and determine the line free energy in 2D and the height of the nucleation barrier in 2D and 3D for homogeneous and heterogeneous nucleation by solving the respective Euler-Lagrange (EL) equations. We demonstrate that, in the PFC model, the body-centered cubic (bcc), the face-centered cubic (fcc), and the hexagonal close-packed structures (hcp) compete, while the simple cubic structure is unstable, and that phase preference can be tuned by changing the model parameters: close to the critical point the bcc structure is stable, while far from the critical point the fcc prevails, with an hcp stability domain in between. We note that with increasing distance from the critical point the equilibrium shapes vary from the sphere to specific faceted shapes: rhombic dodecahedron (bcc), truncated octahedron (fcc), and hexagonal prism (hcp). Solving the equation of motion of the PFC model supplied with conserved noise, solidification starts with the nucleation of an amorphous precursor phase, into which the stable crystalline phase nucleates. The growth rate is found to be time dependent and anisotropic; this anisotropy depends on the driving force. We show that due to the diffusion-controlled growth mechanism, which is especially relevant for crystal aggregation in colloidal systems, dendritic growth structures evolve in large-scale isothermal single-component PFC simulations. An oscillatory effective pair potential resembling those for model glass formers has been evaluated from structural data of the amorphous phase obtained by instantaneous quenching. Finally, we present results for eutectic solidification in a binary PFC model.

  10. Insight into the crystallization of amorphous imine-linked polymer networks to 2D covalent organic frameworks.

    PubMed

    Smith, Brian J; Overholts, Anna C; Hwang, Nicky; Dichtel, William R

    2016-03-01

    We explore the crystallization of a high surface area imine-linked two-dimensional covalent organic framework (2D COF). The growth process reveals rapid initial formation of an amorphous network that subsequently crystallizes into the layered 2D network. The metastable amorphous polymer may be isolated and resubjected to growth conditions to form the COF. These experiments provide the first mechanistic insight into the mechanism of imine-linked 2D COF formation, which is distinct from that of boronate-ester linked COFs. PMID:26857035

  11. Multicriteria classification for photonic crystal fiber design

    NASA Astrophysics Data System (ADS)

    Sassi, Imene; Belacel, Nabil; Bouslimani, Yassine; Hamam, Habib; Attia, Rabah

    2008-06-01

    The photonic crystal fibers (PCF) are considered as the future information support for the telecommunication system. In this paper, a multicriteria method is used for the design of the PCFs with the user-defined optical proprieties. This method combines the deductive and the inductive learning and it is introduced for the first time in the field of optical fibers. These simulation tools will be optimized for PCF structures in order to optimize the parameters necessary for the improvement of the communication system performances. The multicriteria decision analysis makes it possible to evaluate the optical proprieties of PCFs by determining the effects of attenuation and distortion caused by Physics Phenomena. This decision is done by the means of a relational model preferably. As a result, this method avoids the recourse to distances and makes it possible to use quantitative and/or qualitative criteria. Moreover, it defeat some difficulties encountered when data are expressed in different units. These advantages allow the new multicriteria classification method to be employed easily to the diagnosis and to the design of photonic-crystals fibers.

  12. Negative Refraction experiments in Photonic Crystal prisms

    NASA Astrophysics Data System (ADS)

    Vodo, Plarenta; Parimi, Patanjali. V.; Lu, Wentao. T.; di Gennaro, Emiliano; Sridhar, Srinivas

    2004-03-01

    We have experimentally demonstrated negative refraction in metallic photonic crystal (PC) prisms [1]. The refracted fields in the parallel plate waveguide (PPW) are measured by an automated dipole antenna, which scans the desired area, while the free space (FS) measurements, performed in a anechoic chamber, are measured by a rectangular X-band horn that swings in an arc in far field area. Both TE and TM excitation modes are used in FS experiments. Numerical calculations of the band structure and equi-frequency surface simulations are used to determine frequency regions of negative refraction of the triangular lattice PC. Angle of refraction determined by theoretical simulations and experimental results, are in exceptional good agreement, yielding the negative refraction index. FS and PPW refraction experimental results agree remarkably with simulations. 1. "Negative Refraction and Left-handed electromagnetism in Microwave Photonic Crystals", P.V Parimi, W.T Lu, P.Vodo J. Sokoloff and S.Sridhar, cond-mat/0306109 (2003)

  13. Photonic Crystal Laser-Driven Accelerator Structures

    SciTech Connect

    Cowan, Benjamin M.

    2007-08-22

    Laser-driven acceleration holds great promise for significantly improving accelerating gradient. However, scaling the conventional process of structure-based acceleration in vacuum down to optical wavelengths requires a substantially different kind of structure. We require an optical waveguide that (1) is constructed out of dielectric materials, (2) has transverse size on the order of a wavelength, and (3) supports a mode with speed-of-light phase velocity in vacuum. Photonic crystals---structures whose electromagnetic properties are spatially periodic---can meet these requirements. We discuss simulated photonic crystal accelerator structures and describe their properties. We begin with a class of two-dimensional structures which serves to illustrate the design considerations and trade-offs involved. We then present a three-dimensional structure, and describe its performance in terms of accelerating gradient and efficiency. We discuss particle beam dynamics in this structure, demonstrating a method for keeping a beam confined to the waveguide. We also discuss material and fabrication considerations. Since accelerating gradient is limited by optical damage to the structure, the damage threshold of the dielectric is a critical parameter. We experimentally measure the damage threshold of silicon for picosecond pulses in the infrared, and determine that our structure is capable of sustaining an accelerating gradient of 300 MV/m at 1550 nm. Finally, we discuss possibilities for manufacturing these structures using common microfabrication techniques.

  14. Fabrication and evaluation of photonic metamaterial crystal

    NASA Astrophysics Data System (ADS)

    Tanabete, S.; Nakagawa, Y.; Okamoto, T.; Haraguchi, M.; Isu, T.; Shinomiya, G.

    2013-09-01

    Many researching efforts have been reported to seek various fundamental LC resonance structures, recently. But still the Split Ring Resonator (SRR) is the most famous and major fundamental LC-resonance structure used in the metamaterial. We employed SRR structure as the fundamental LC-resonance mechanism to fabricate photonic crystal with periodic arrangement of two different metamaterial areas composed from SRR arrays on the dielectric substrate. We developed Photonic Metamaterial Crystal (PMC) to realize the more advanced and versatile functions of the metamaterial by 1 dimensional or 2 dimensional periodic arranging of two metamaterial sections which have different dispersion properties due to the different size of SRR structures each other. In this paper, we report the fabrication process, estimation of PMC properties and some possible future application prospects, for instance the PMC waveguide structures and nonlinear properties of PMC observed as selective LC-resonant properties in Raman mapping analysis of PMC. These are quite interesting characters of PMC and the attractive applications as the PMC devices.

  15. Photonic Crystal Enhanced Fluorescence for Early Breast Cancer Biomarker Detection

    PubMed Central

    Cunningham, Brian T.; Zangar, Richard C.

    2013-01-01

    Photonic crystal surfaces offer a compelling platform for improving the sensitivity of surface-based fluorescent assays used in disease diagnostics. Through the complementary processes of photonic crystal enhanced excitation and enhanced extraction, a periodic dielectric-based nanostructured surface can simultaneously increase the electric field intensity experienced by surface-bound fluorophores and increase the collection efficiency of emitted fluorescent photons. Through the ability to inexpensively fabricate photonic crystal surfaces over substantial surface areas, they are amenable to single-use applications in biological sensing, such as disease biomarker detection in serum. In this review, we will describe the motivation for implementing high-sensitivity, multiplexed biomarker detection in the context of breast cancer diagnosis. We will summarize recent efforts to improve the detection limits of such assays though the use of photonic crystal surfaces. Reduction of detection limits is driven by low autofluorescent substrates for photonic crystal fabrication, and detection instruments that take advantage of their unique features. PMID:22736539

  16. Dielectric matrices with air cavities as a waveguide photonic crystal

    NASA Astrophysics Data System (ADS)

    Usanov, D. A.; Skripal', A. V.; Merdanov, M. K.; Gorlitskii, V. O.

    2016-02-01

    Frequency dependences of the transmission coefficient of a microwave photonic crystal that represents a structure containing alternating layers of ceramic material (Al2O3) with a relatively large number of cavities and foam plastic are studied in the presence and absence of distortions of the periodicity of a photonic structure. The frequency dependences of the transmission coefficient can be analyzed using a model of effective medium that makes it possible to consider the interaction of electromagnetic wave and photonic crystal using a transfer matrix of a 1D photonic crystal. The band character of the frequency dependence of the transmission coefficient of the photonic crystal related to the periodicity of the photonic crystal in the transverse plane for the waveguide with a standard cross section is not manifested in a certain range of material permittivities.

  17. Symmetry-protected topological photonic crystal in three dimensions

    NASA Astrophysics Data System (ADS)

    Lu, Ling; Fang, Chen; Fu, Liang; Johnson, Steven G.; Joannopoulos, John D.; Soljačić, Marin

    2016-04-01

    Topology of electron wavefunctions was first introduced to characterize the quantum Hall states in two dimensions discovered in 1980 (ref. ). Over the past decade, it has been recognized that symmetry plays a crucial role in the classification of topological phases, leading to the broad notion of symmetry-protected topological phases. As a primary example, topological insulators are distinguished from normal insulators in the presence of time-reversal symmetry (). A three-dimensional (3D) topological insulator exhibits an odd number of protected surface Dirac cones, a unique property that cannot be realized in any 2D systems. Importantly, the existence of topological insulators requires Kramers’ degeneracy in spin-orbit coupled electronic materials; this forbids any direct analogue in boson systems. In this report, we discover a 3D topological photonic crystal phase hosting a single surface Dirac cone, which is protected by a crystal symmetry--the nonsymmorphic glide reflection rather than . Such a gapless surface state is fully robust against random disorder of any type. This bosonic topological band structure is achieved by applying alternating magnetization to gap out the 3D `generalized Dirac points’ discovered in the bulk of our crystal. The Z2 bulk invariant is characterized through the evolution of Wannier centres. Our proposal--readily realizable using ferrimagnetic materials at microwave frequencies--expands the scope of 3D topological materials from fermions to bosons.

  18. Extended-Range Ultrarefractive 1D Photonic Crystal Prisms

    NASA Technical Reports Server (NTRS)

    Ting, David Z.

    2007-01-01

    A proposal has been made to exploit the special wavelength-dispersive characteristics of devices of the type described in One-Dimensional Photonic Crystal Superprisms (NPO-30232) NASA Tech Briefs, Vol. 29, No. 4 (April 2005), page 10a. A photonic crystal is an optical component that has a periodic structure comprising two dielectric materials with high dielectric contrast (e.g., a semiconductor and air), with geometrical feature sizes comparable to or smaller than light wavelengths of interest. Experimental superprisms have been realized as photonic crystals having three-dimensional (3D) structures comprising regions of amorphous Si alternating with regions of SiO2, fabricated in a complex process that included sputtering. A photonic crystal of the type to be exploited according to the present proposal is said to be one-dimensional (1D) because its contrasting dielectric materials would be stacked in parallel planar layers; in other words, there would be spatial periodicity in one dimension only. The processes of designing and fabricating 1D photonic crystal superprisms would be simpler and, hence, would cost less than do those for 3D photonic crystal superprisms. As in 3D structures, 1D photonic crystals may be used in applications such as wavelength-division multiplexing. In the extended-range configuration, it is also suitable for spectrometry applications. As an engineered structure or artificially engineered material, a photonic crystal can exhibit optical properties not commonly found in natural substances. Prior research had revealed several classes of photonic crystal structures for which the propagation of electromagnetic radiation is forbidden in certain frequency ranges, denoted photonic bandgaps. It had also been found that in narrow frequency bands just outside the photonic bandgaps, the angular wavelength dispersion of electromagnetic waves propagating in photonic crystal superprisms is much stronger than is the angular wavelength dispersion obtained

  19. Influence of lattice defects on the ferromagnetic resonance behaviour of 2D magnonic crystals

    NASA Astrophysics Data System (ADS)

    Manzin, Alessandra; Barrera, Gabriele; Celegato, Federica; Coïsson, Marco; Tiberto, Paola

    2016-02-01

    This paper studies, from a modelling point of view, the influence of randomly distributed lattice defects (non-patterned areas and variable hole size) on the ferromagnetic resonance behaviour and spin wave mode profiles of 2D magnonic crystals based on Ni80Fe20 antidot arrays with hexagonal lattice. A reference sample is first defined via the comparison of experimental and simulated hysteresis loops and magnetoresistive curves of patterned films, prepared by self-assembly of polystyrene nanospheres. Second, a parametric analysis of the dynamic response is performed, investigating how edge, quasi-uniform and localized modes are affected by alterations of the lattice geometry and bias field amplitude. Finally, some results about the possible use of magnetic antidot arrays in frequency-based sensors for magnetic bead detection are presented, highlighting the need for an accurate control of microstructural features.

  20. Influence of lattice defects on the ferromagnetic resonance behaviour of 2D magnonic crystals.

    PubMed

    Manzin, Alessandra; Barrera, Gabriele; Celegato, Federica; Coïsson, Marco; Tiberto, Paola

    2016-01-01

    This paper studies, from a modelling point of view, the influence of randomly distributed lattice defects (non-patterned areas and variable hole size) on the ferromagnetic resonance behaviour and spin wave mode profiles of 2D magnonic crystals based on Ni80Fe20 antidot arrays with hexagonal lattice. A reference sample is first defined via the comparison of experimental and simulated hysteresis loops and magnetoresistive curves of patterned films, prepared by self-assembly of polystyrene nanospheres. Second, a parametric analysis of the dynamic response is performed, investigating how edge, quasi-uniform and localized modes are affected by alterations of the lattice geometry and bias field amplitude. Finally, some results about the possible use of magnetic antidot arrays in frequency-based sensors for magnetic bead detection are presented, highlighting the need for an accurate control of microstructural features. PMID:26911336

  1. Influence of lattice defects on the ferromagnetic resonance behaviour of 2D magnonic crystals

    PubMed Central

    Manzin, Alessandra; Barrera, Gabriele; Celegato, Federica; Coïsson, Marco; Tiberto, Paola

    2016-01-01

    This paper studies, from a modelling point of view, the influence of randomly distributed lattice defects (non-patterned areas and variable hole size) on the ferromagnetic resonance behaviour and spin wave mode profiles of 2D magnonic crystals based on Ni80Fe20 antidot arrays with hexagonal lattice. A reference sample is first defined via the comparison of experimental and simulated hysteresis loops and magnetoresistive curves of patterned films, prepared by self-assembly of polystyrene nanospheres. Second, a parametric analysis of the dynamic response is performed, investigating how edge, quasi-uniform and localized modes are affected by alterations of the lattice geometry and bias field amplitude. Finally, some results about the possible use of magnetic antidot arrays in frequency-based sensors for magnetic bead detection are presented, highlighting the need for an accurate control of microstructural features. PMID:26911336

  2. Theoretical design of photonic crystal devices for integrated optical circuits

    NASA Astrophysics Data System (ADS)

    Mekis, Attila

    2000-12-01

    In this thesis we investigate novel photonic crystal devices that can be used as building blocks of all- optical circuits. We contrast the behavior of light in photonic crystal systems and in their traditional counterparts. We exhibit that bends in photonic crystals are able to transmit light with over 90% efficiency for large bandwidths and with 100% efficiency for specific frequencies. In contrast to traditional waveguides, bound states in photonic crystal waveguides can also exist in constrictions and above the cutoff frequency. We discuss how to lower reflections encountered when photonic crystal waveguides are terminated, both in an experimental setup as well as in numerical simulations. We show that light can be very efficiently coupled into and out of photonic crystal waveguides using tapered dielectric waveguides. In time-domain simulations of photonic crystal waveguides, spurious reflections from cell edges can be eliminated by terminating the waveguide with a Bragg reflector waveguide. We demonstrate novel lasing action in two-dimensional photonic crystal slabs with gain media, where lasing occurs at saddle points in the band structure, in contrast to one-dimensional photonic crystals. We also design a photonic crystal slab with organic gain media that has a TE-like pseudogap. We demonstrate that such a slab can support a high- Q defect mode, enabling low threshold lasing, and we discuss how the quality factor depends on the design parameters. We also propose to use two- dimensional photonic crystal slabs as directionally efficient free-space couplers. We draft methods to calculate the coupling constant both numerically and analytically, using a finite-difference time-domain method and the volume current method with a Green's function approach, respectively. (Copies available exclusively from MIT Libraries, Rm. 14-0551, Cambridge, MA 02139-4307. Ph. 617-253-5668; Fax 617-253-1690.)

  3. Liquid sensor based bio-chip for DNA analysis of cancer using photonic crystal

    NASA Astrophysics Data System (ADS)

    Patil, Harshada; Nischitha, R.; Indumathi, T. S.; Sharan, Preeta

    2015-07-01

    Silicon photonics is poised to revolutionize bio-sensing applications, specifically in medical diagnostics. The need for cost effective and reliable bio-sensors in medical applications is an ever growing and everlasting one. In this synopsis we have designed a 2-D hexagonal photonic crystal ring resonator based bio-sensor that is able to detect lung cancer from blood. Simulation and analysis has been done for normal DNA and the cancer affected DNA in blood. The intensity level of transmission spectrum has been observed. Finite Difference Time Domain (FDTD) method is used for analysis. MEEP (MIT Electromagnetic Equation Propagation) tool and RSOFT Photonic Suite CAD tool are used designing the photonic crystal sensor. The results show that for small changes in the refractive index of the input samples there is a significant shift in wavelength and amplitude. Thus the sensor is highly sensitive for change in refractive index and hence differentiating normal and cancer affected DNA.

  4. A 1-D dusty plasma photonic crystal

    SciTech Connect

    Mitu, M. L.; Ticoş, C. M.; Toader, D.; Banu, N.; Scurtu, A.

    2013-09-21

    It is demonstrated numerically that a 1-D plasma crystal made of micron size cylindrical dust particles can, in principle, work as a photonic crystal for terahertz waves. The dust rods are parallel to each other and arranged in a linear string forming a periodic structure of dielectric-plasma regions. The dispersion equation is found by solving the waves equation with the boundary conditions at the dust-plasma interface and taking into account the dielectric permittivity of the dust material and plasma. The wavelength of the electromagnetic waves is in the range of a few hundred microns, close to the interparticle separation distance. The band gaps of the 1-D plasma crystal are numerically found for different types of dust materials, separation distances between the dust rods and rod diameters. The distance between levitated dust rods forming a string in rf plasma is shown experimentally to vary over a relatively wide range, from 650 μm to about 1350 μm, depending on the rf power fed into the discharge.

  5. Extremely low-loss terahertz waveguide based on silicon photonic-crystal slab.

    PubMed

    Tsuruda, Kazuisao; Fujita, Masayuki; Nagatsuma, Tadao

    2015-12-14

    We pursued the extremely low loss of photonic-crystal waveguides composed of a silicon slab with high resistivity (20 kΩ-cm) in the terahertz region. Propagation and bending losses as small as <0.1 dB/cm (0.326-0.331 THz) and 0.2 dB/bend (0.323-0.331 THz), respectively, were achieved in the 0.3-THz band. We also developed 1.5-Gbit/s terahertz links and demonstrated an error-free uncompressed high-definition video transmission by using a photonic-crystal waveguide with a length of as long as 50 cm and up to 28 bends thanks to the low-loss properties. Our results show the potential of photonic crystals for application as terahertz integration platforms. PMID:26698989

  6. Determining ice water content from 2D crystal images in convective cloud systems

    NASA Astrophysics Data System (ADS)

    Leroy, Delphine; Coutris, Pierre; Fontaine, Emmanuel; Schwarzenboeck, Alfons; Strapp, J. Walter

    2016-04-01

    Cloud microphysical in-situ instrumentation measures bulk parameters like total water content (TWC) and/or derives particle size distributions (PSD) (utilizing optical spectrometers and optical array probes (OAP)). The goal of this work is to introduce a comprehensive methodology to compute TWC from OAP measurements, based on the dataset collected during recent HAIC (High Altitude Ice Crystals)/HIWC (High Ice Water Content) field campaigns. Indeed, the HAIC/HIWC field campaigns in Darwin (2014) and Cayenne (2015) provide a unique opportunity to explore the complex relationship between cloud particle mass and size in ice crystal environments. Numerous mesoscale convective systems (MCSs) were sampled with the French Falcon 20 research aircraft at different temperature levels from -10°C up to 50°C. The aircraft instrumentation included an IKP-2 (isokinetic probe) to get reliable measurements of TWC and the optical array probes 2D-S and PIP recording images over the entire ice crystal size range. Based on the known principle relating crystal mass and size with a power law (m=α•Dβ), Fontaine et al. (2014) performed extended 3D crystal simulations and thereby demonstrated that it is possible to estimate the value of the exponent β from OAP data, by analyzing the surface-size relationship for the 2D images as a function of time. Leroy et al. (2015) proposed an extended version of this method that produces estimates of β from the analysis of both the surface-size and perimeter-size relationships. Knowing the value of β, α then is deduced from the simultaneous IKP-2 TWC measurements for the entire HAIC/HIWC dataset. The statistical analysis of α and β values for the HAIC/HIWC dataset firstly shows that α is closely linked to β and that this link changes with temperature. From these trends, a generalized parameterization for α is proposed. Finally, the comparison with the initial IKP-2 measurements demonstrates that the method is able to predict TWC values

  7. Three-dimensional photonic crystals fabricated by simultaneous multidirectional etching

    NASA Astrophysics Data System (ADS)

    Kitano, Keisuke; Suzuki, Katsuyoshi; Ishizaki, Kenji; Noda, Susumu

    2015-04-01

    We discuss three-dimensional (3D) photonic crystals fabricated by simultaneous multidirectional plasma etching. First, we investigate a method for controlling the ion sheath used in reactive ion etching for obtaining multidirectional etching. We then discuss the fabrication tolerance from an analytical perspective. Based on our results, we demonstrate the fabrication of 3D photonic crystals with thicknesses of 1, 1.5, and 2 lattice periods in the surface-normal direction on single-crystalline silicon wafers, which show high reflectance (˜100 %) and low transmittance (-17 dB ) at optical communication wavelengths, suggesting the formation of a complete photonic band gap. We reveal that the shape of the etched holes limits the performance of 3D photonic crystals and suggest possible ways to improve the band-gap effect. Moreover, we show that 3D photonic crystals with short lattice constants show high reflectance (˜80 %) at visible to near-infrared wavelengths. By investigating the influence of absorption on the characteristics of 3D photonic crystals, we reveal that the reflectance remains as high as 94% in the photonic band-gap range even when the absorption of silicon is taken into account. We find that a unique increase of absorption occurs at several discrete wavelengths below the photonic band gap, suggesting the possibility of manipulating light absorption. These results not only simplify the fabrication of 3D photonic crystals, but also provide a basis for realizing 3D photonic nanostructures that include other materials.

  8. A Novel 2-D Programmable Photonic Time Delay Device for MM-Wave Signal Processing Applications

    NASA Technical Reports Server (NTRS)

    Yao, X.; Maleki, L.

    1994-01-01

    We describe a novel programmable photonic true time delay device that has the properties of low loss, inherent two dimensionality with a packing density exceeding 25 lines/cm super 2, virtually infinite bandwidth, and is easy to manufacture.

  9. Large-scale high-quality 2D silica crystals: dip-drawing formation and decoration with gold nanorods and nanospheres for SERS analysis

    NASA Astrophysics Data System (ADS)

    Khanadeev, Vitaly А; Khlebtsov, Boris N.; Klimova, Svetlana A.; Tsvetkov, Mikhail Yu; Bagratashvili, Victor N.; Sukhorukov, Gleb B.; Khlebtsov, Nikolai G.

    2014-10-01

    High-quality colloidal crystals (CCs) are important for use in photonic research and as templates for large-scale plasmonic SERS substrates. We investigated how variations in temperature, colloid concentration, and dip-drawing parameters (rate, incubation time, etc) affect the structure of 2D CCs formed by highly monodisperse silica nanoparticles (SiNPs) synthesized in an l-arginine solution and regrown by a modified Stöber method. The best quality 2D CCs were obtained with aqueous 12 wt% colloids at a temperature of 25 °C, an incubation time of 1 min, and a drawing rate of 50 mm min-1. Assembling of gold nanorods (GNRs) on 2D CCs resulted in the formation of ring-like chains with a preferential tail-to-tail orientation along the hexagonal boundaries. To the best of our knowledge, this is the first time that such nanostructures have been prepared. Owing to the preferential tail-to-tail packing of GNRs, 2D SiNP CC + GNR substrates demonstrated an analytical SERS enhancement of about 8000, which was 10 to 15 times higher than that for self-assembled GNRs on a silicon wafer. In addition, the analytical SERS enhancement was almost 60 times lower after replacing the nanorods in 2D SiNP CC + GNR substrates with 25 nm gold nanospheres.

  10. Hydrothermal Synthesis, Crystal Structure and Electrochemical Behavior of 2d Hybrid Coordination Polymer

    NASA Astrophysics Data System (ADS)

    Fan, Weiqiang; Zhu, Lin; Shi, Weidong; Chen, Fuxiao; Bai, Hongye; Song, Shuyan; Yan, Yongsheng

    2013-06-01

    A novel metal-organic coordination polymer [Cu(phen)(L)0.5(H2O)]n (H4L = (N,N‧-5,5‧-bis(isophthalic acid)-p-xylylenediamine, and phen = 1,10-phenanthroline) has been hydrothermally synthesized and characterized by elemental analysis, IR, TGA, and single-crystal X-ray diffraction. The crystallographic data show that the title compound crystallizes in monoclinic space group P21/n with a = 10.682(2), b = 15.682(3), c = 11.909(2) Å, β = 91.39(3)°, V = 1994.3(7) Å3, C24H17CuN3O5, Mr = 490.95, Dc = 1.635 g/cm3, F(000) = 1004, Z = 4, μ(MoKα) = 1.141 mm-1, the final R = 0.0418 and wR = 0.0983 for 3578 observed reflections (I > 2σ(I)). The structural analyses reveal that the title compound exhibits shows a 2D layer structure, which are further linked by hydrogen bonding interactions to form a three-dimensional supramolecular network. In addition, the thermal stability and electrochemical behavior of title compound has been studied. CCDC: 900413.

  11. Photonic crystal chips for optical communications and quantum information processing

    NASA Astrophysics Data System (ADS)

    Englund, Dirk; Fushman, Ilya; Faraon, Andrei; Ellis, Bryan; Vučković, Jelena

    2008-08-01

    We discuss recent our recent progress on functional photonic crystals devices and circuits for classical and quantum information processing. For classical applications, we have demonstrated a room-temperature-operated, low threshold, nanocavity laser with pulse width in the picosecond regime; and an all-optical switch controlled with 60 fJ pulses that shows switching time on the order of tens of picoseconds. For quantum information processing, we discuss the promise of quantum networks on multifunctional photonic crystals chips. We also discuss a new coherent probing technique of quantum dots coupled to photonic crystal nanocavities and demonstrate amplitude and phase nonlinearities realized with control beams at the single photon level.

  12. Controlled coupling of photonic crystal cavities using photochromic tuning

    NASA Astrophysics Data System (ADS)

    Cai, Tao; Bose, Ranojoy; Solomon, Glenn S.; Waks, Edo

    2013-04-01

    We present a method to control the resonant coupling interaction in a coupled-cavity photonic crystal molecule by using a local and reversible photochromic tuning technique. We demonstrate the ability to tune both a two-cavity and a three-cavity photonic crystal molecule through the resonance condition by selectively tuning the individual cavities. Using this technique, we can quantitatively determine important parameters of the coupled-cavity system such as the photon tunneling rate. This method can be scaled to photonic crystal molecules with larger numbers of cavities, which provides a versatile method for studying strong interactions in coupled resonator arrays.

  13. Waveguide circuits in three-dimensional photonic crystals

    SciTech Connect

    Biswas, Rana; Christensen, C.; Muehlmeier, J.; Tuttle, G.; Ho, K.-M.

    2008-04-07

    Waveguide circuits in three-dimensional photonic crystals with complete photonic band gaps are simulated with finite difference time domain (FDTD) simulations, and compared with measurements on microwave scale photonic crystals. The transmission through waveguide bends critically depends on the photonic crystal architecture in the bend region. We have found experimentally and theoretically, a new waveguide bend configuration consisting of overlapping rods in the bend region, that performs better than the simple waveguide bend of terminated rods, especially in the higher frequency portion of the band. Efficient beam splitters with this junction geometry are also simulated.

  14. Strongly-Refractive One-Dimensional Photonic Crystal Prisms

    NASA Technical Reports Server (NTRS)

    Ting, David Z. (Inventor)

    2004-01-01

    One-dimensional (1D) photonic crystal prisms can separate a beam of polychromatic electromagnetic waves into constituent wavelength components and can utilize unconventional refraction properties for wavelength dispersion over significant portions of an entire photonic band rather than just near the band edges outside the photonic band gaps. Using a ID photonic crystal simplifies the design and fabrication process and allows the use of larger feature sizes. The prism geometry broadens the useful wavelength range, enables better optical transmission, and exhibits angular dependence on wavelength with reduced non-linearity. The properties of the 1 D photonic crystal prism can be tuned by varying design parameters such as incidence angle, exit surface angle, and layer widths. The ID photonic crystal prism can be fabricated in a planar process, and can be used as optical integrated circuit elements.

  15. Two-photon-induced singlet fission in rubrene single crystal

    NASA Astrophysics Data System (ADS)

    Ma, Lin; Galstyan, Gegham; Zhang, Keke; Kloc, Christian; Sun, Handong; Soci, Cesare; Michel-Beyerle, Maria E.; Gurzadyan, Gagik G.

    2013-05-01

    The two-photon-induced singlet fission was observed in rubrene single crystal and studied by use of femtosecond pump-probe spectroscopy. The location of two-photon excited states was obtained from the nondegenerate two-photon absorption (TPA) spectrum. Time evolution of the two-photon-induced transient absorption spectra reveals the direct singlet fission from the two-photon excited states. The TPA absorption coefficient of rubrene single crystal is 52 cm/GW at 740 nm, as obtained from Z-scan measurements. Quantum chemical calculations based on time-dependent density functional theory support our experimental data.

  16. Photonic crystal cavities with metallic Schottky contacts

    SciTech Connect

    Quiring, W.; Al-Hmoud, M.; Reuter, D.; Zrenner, A.; Rai, A.; Wieck, A. D.

    2015-07-27

    We report about the fabrication and analysis of high Q photonic crystal cavities with metallic Schottky-contacts. The structures are based on GaAs n-i membranes with an InGaAs quantum well in the i-region and nanostructured low ohmic metal top-gates. They are designed for photocurrent readout within the cavity and fast electric manipulations. The cavity structures are characterized by photoluminescence and photocurrent spectroscopy under resonant excitation. We find strong cavity resonances in the photocurrent spectra and surprisingly high Q-factors up to 6500. Temperature dependent photocurrent measurements in the region between 4.5 K and 310 K show an exponential enhancement of the photocurrent signal and an external quantum efficiency up to 0.26.

  17. Asymptotics for metamaterials and photonic crystals.

    PubMed

    Antonakakis, T; Craster, R V; Guenneau, S

    2013-04-01

    Metamaterial and photonic crystal structures are central to modern optics and are typically created from multiple elementary repeating cells. We demonstrate how one replaces such structures asymptotically by a continuum, and therefore by a set of equations, that captures the behaviour of potentially high-frequency waves propagating through a periodic medium. The high-frequency homogenization that we use recovers the classical homogenization coefficients in the low-frequency long-wavelength limit. The theory is specifically developed in electromagnetics for two-dimensional square lattices where every cell contains an arbitrary hole with Neumann boundary conditions at its surface and implemented numerically for cylinders and split-ring resonators. Illustrative numerical examples include lensing via all-angle negative refraction, as well as omni-directive antenna, endoscope and cloaking effects. We also highlight the importance of choosing the correct Brillouin zone and the potential of missing interesting physical effects depending upon the path chosen. PMID:23633908

  18. Suspended polymeric photonic crystals: simulation and fabrication

    NASA Astrophysics Data System (ADS)

    Rebigan, R.; Dinescu, A.; Kusko, C.; Gavrila, R.; Cristea, D.; Obreja, C.; Schiopu, P.

    2010-11-01

    In this paper we present simulation of transmission / reflection spectra of polymeric rectangular and hexagonal photonic crystals (PC) as well as the propagation of radiation in a hexagonal PC - based waveguide. The polymeric PC are periodic structures consisting in square arrays of holes configured in suspended membranes of PMMA with different diameters and pitch (100 nm diameter with 500 nm, respectively 800 nm pitch; 200 nm diameter with 500 nm pitch; 400 nm diameter with 700 nm pitch). For fabrication, we propose the bi-layer EBL technique based on simultaneous patterning of a bottom sacrificial layer (LOR 5A - Microchem Corporation) and a positive electron resist (PMMA of different molecular weights). Characterization of nanostructures was performed using SEM imaging and AFM measurements .

  19. Surface Brillouin scattering in photonic crystal fibers.

    PubMed

    Tchahame, Joël Cabrel; Beugnot, Jean-Charles; Huy, Kien Phan; Laude, Vincent; Kudlinski, Alexandre; Sylvestre, Thibaut

    2016-07-15

    We report, to the best of our knowledge, the first experimental observation of surface Brillouin scattering in silica-based photonic crystal fibers, arising from the interaction between guided light and surface acoustic waves. This was achieved using small-core and high air-filling fraction microstructured fibers that enable a strong opto-acoustic coupling near the air holes while mitigating the acoustic leakages in the microstructured cladding. It is further shown that this new type of light scattering is highly sensitive to the fiber air-hole microstructure, thus providing a passive and efficient way to control it. Our observations are confirmed through numerical simulations of the elastodynamics equation. PMID:27420512

  20. Squeezed state generation in photonic crystal microcavities.

    PubMed

    Banaee, M G; Young, Jeff F

    2008-12-01

    The feasibility of using a parametric down-conversion process to generate squeezed electromagnetic states in three dimensional photonic crystal microcavity structures is investigated for the first time. The spectrum of the squeezed light is theoretically calculated by using an open cavity quantum mechanical formalism. The cavity communicates with two main channels, which model vertical radiation losses and coupling into a single-mode waveguide respectively. The amount of squeezing is determined by the correlation functions relating the field quadratures of light coupled into the waveguide. All of the relevant model parameters are realistically estimated for structures made in Al0.3Ga0.7As, using finite-difference time-domain simulations. Squeezing up to approximately 30% below the shot noise level is predicted for 10 mW average power, 80 MHz repetition, 500 ps excitation pulses using in a [111] oriented wafer. PMID:19065230

  1. A laminar solid core photonic crystal waveguide

    NASA Astrophysics Data System (ADS)

    Willig, R. L.

    2005-11-01

    A one-dimensional model is presented to explain the physics of solid core photonic crystal fibers. The model provides a clear way to demonstrate many of the interesting characteristics of these fibers: variation of cladding index with wavelength, endlessly single-mode operation, short wavelength index limit, long wavelength index limit, and variation of these properties with the air/silica fraction. The effective index is calculated for a laminar cladding consisting of periodic layers of alternating high and low index dielectrics. The waveguide model consists of the same periodic layers surrounding a high-index core through which most of the light propagates. The light is confined by total internal reflection. The model is shown to be an accurate analogue for a more complicated two-dimensional finned dielectric waveguide.

  2. Enhanced photoacoustic detection using photonic crystal substrate

    SciTech Connect

    Zhao, Yunfei; Liu, Kaiyang; McClelland, John; Lu, Meng

    2014-04-21

    This paper demonstrates the enhanced photoacoustic sensing of surface-bound light absorbing molecules and metal nanoparticles using a one-dimensional photonic crystal (PC) substrate. The PC structure functions as an optical resonator at the wavelength where the analyte absorption is strong. The optical resonance of the PC sensor provides an intensified evanescent field with respect to the excitation light source and results in enhanced optical absorption by surface-immobilized samples. For the analysis of a light absorbing dye deposited on the PC surface, the intensity of photoacoustic signal was enhanced by more than 10-fold in comparison to an un-patterned acrylic substrate. The technique was also applied to detect gold nanorods and exhibited more than 40 times stronger photoacoustic signals. The demonstrated approach represents a potential path towards single molecule absorption spectroscopy with greater performance and inexpensive instrumentation.

  3. Stable planar mesoscopic photonic crystal cavities.

    PubMed

    Magno, G; Monmayrant, A; Grande, M; Lozes-Dupuy, F; Gauthier-Lafaye, O; Calò, G; Petruzzelli, V

    2014-07-15

    Mesoscopic self-collimation (MSC) in mesoscopic photonic crystals with high reflectivity is exploited to realize a novel high Q-factor cavity by means of mesoscopic PhC planar mirrors. These mirrors efficiently confine a mode inside a planar Fabry-Perot-like cavity, that results from a beam focusing effect that stabilizes the cavity even for small beam sizes, resembling the focusing behavior of curved mirrors. Moreover, they show an improved reflectivity with respect to their standard distributed Bragg reflector counterparts that allows higher compactness. A Q-factor higher than 10⁴ has been achieved for an optimized 5-period-long mirror cavity. The optimization of the Q-factor and the performances in terms of energy storage, field enhancement, and confinement are detailed. PMID:25121692

  4. Nonlinear waveguide optics and photonic crystal fibers.

    PubMed

    Knight, J C; Skryabin, D V

    2007-11-12

    Focus Serial: Frontiers of Nonlinear Optics

    Optical fibers and waveguides provide unique and distinct environments for nonlinear optics, because of the combination of high intensities, long interaction lengths, and control of the propagation constants. They are also becoming of technological importance. The topic has a long history but continues to generate rapid development, most recently through the invention of the new forms of optical fiber collectively known as photonic crystal fibers. Some of the discoveries and ideas from the new fibers look set to have lasting influence in the broader field of guided-wave nonlinear optics. In this paper we introduce some of these ideas. PMID:19550822

  5. Optical nanofiber-based photonic crystal cavity.

    PubMed

    Nayak, K P; Zhang, Pengfei; Hakuta, K

    2014-01-15

    We demonstrate the fabrication of photonic crystal (PhC) cavities on optical nanofibers using femtosecond laser ablation. PhC cavities with cavity lengths varying from 0.54 to 3.43 mm are fabricated by controlling the profile of the nanocrater array formed on the nanofiber. Such PhC cavities show high transmission of 87% for a finesse of 39. For higher finesse values from 150 to 500, the transmission can still be maintained at 20%-25%. Due to the strong confinement of the field and the efficient coupling to single-mode optical fibers, such nanofiber-based PhC cavities may become an interface between quantum and classical networks. PMID:24562114

  6. Fano resonance in anodic aluminum oxide based photonic crystals

    PubMed Central

    Shang, Guo Liang; Fei, Guang Tao; Zhang, Yao; Yan, Peng; Xu, Shao Hui; Ouyang, Hao Miao; De Zhang, Li

    2014-01-01

    Anodic aluminum oxide based photonic crystals with periodic porous structure have been prepared using voltage compensation method. The as-prepared sample showed an ultra-narrow photonic bandgap. Asymmetric line-shape profiles of the photonic bandgaps have been observed, which is attributed to Fano resonance between the photonic bandgap state of photonic crystal and continuum scattering state of porous structure. And the exhibited Fano resonance shows more clearly when the sample is saturated ethanol gas than air-filled. Further theoretical analysis by transfer matrix method verified these results. These findings provide a better understanding on the nature of photonic bandgaps of photonic crystals made up of porous materials, in which the porous structures not only exist as layers of effective-refractive-index material providing Bragg scattering, but also provide a continuum light scattering state to interact with Bragg scattering state to show an asymmetric line-shape profile. PMID:24398625

  7. Influence of surface termination on inverse Goos–Hänchen shift of negatively refractive photonic crystals

    NASA Astrophysics Data System (ADS)

    Hu, Jinbing; Liang, Binming; Chen, Jiabi; Cai, Xiaoshu; Jiang, Qiang; Zhuang, Songlin

    2016-07-01

    The effect of surface termination on the inverse Goos–Hänchen (GH) shift of two-dimensional (2D) negatively refractive photonic crystals (NRPhCs) containing air holes arranged in a hexagonal lattice in a dielectric background is investigated for transverse magnetic (TM) polarization. Results show that the magnitude of the inverse GH shift of 2D-NRPhCs strongly depends on surface termination even for an incident beam with a fixed frequency and incidence angle. Calculation of dispersion of surface mode as a function of termination reveals that large inverse GH shift of 2D-NRPhCs results from the excitation of backward surface mode. In addition, the coupling coefficient of the incident field into the field of surface mode and energy flux around the interface are studied and demonstrate the above conclusion. This paper will provide technical information regarding the combination of various functional photonic elements in the design of integrated optical circuits.

  8. Superconducting Photonic Crystal with Nanostrips for Mid-Infrared Applications

    SciTech Connect

    Ooi, C. H. Raymond

    2011-03-30

    One dimensional photonic crystal with superconducting nanostrips and semiconductor materials can be tailored to have narrow bands, with either large transmission or large reflection. Based on the reflection and transmission coefficients, we study the temporal dynamics of the reflected and transmitted pulses from the finite photonic crystal. The output pulse dynamics show slow light effect around the narrow bands that can be useful for photonic technologies.

  9. Study of deformed quasi-periodic Fibonacci two dimensional photonic crystals

    NASA Astrophysics Data System (ADS)

    Ben Abdelaziz, K.; Bouazzi, Y.; Kanzari, M.

    2015-09-01

    Quasi-periodic photonic crystals are not periodic structures. These structures are generally obtained by the arrangement of layers according to a recursive rule. Properties of these structures make more attention the researchers especially in the case when applying defects. So, photonic crystals with defects present localized modes in the band gap leading to many potential applications such light localization. The objective of this work is to study by simulation the effect of the global deformation introduced in 2D quasiperiodic photonic crystals. Deformation was introduced by applying a power law, so that the coordinates y of the deformed object were determined through the coordinates x of the non-deformed structure in accordance with the following rule: y = x1+k. Here k is the coefficient defining the deformation. Therefore, the objective is to study the effect of this deformation on the optical properties of 2D quasiperiodic photonic crystals, constructed by Fibonacci generation. An omnidirectional mirror was obtained for optimization Fibonacci iteration in a part of visible spectra.

  10. A photonic crystal waveguide with silicon on insulator in the near-infrared band

    NASA Astrophysics Data System (ADS)

    Tang, Hai-Xia; Zuo, Yu-Hua; Yu, Jin-Zhong; Wang, Qi-Ming

    2007-07-01

    A two-dimensional (2D) photonic crystal waveguide in the Γ-K direction with triangular lattice on a silicon-on-insulator (SOI) substrate in the near-infrared band is fabricated by the combination of electron beam lithography and inductively coupled plasma etching. Its transmission characteristics are analysed from the stimulated band diagram by the effective index and the 2D plane wave expansion (PWE) methods. In the experiment, the transmission band edge in a longer wavelength of the photonic crystal waveguide is about 1590 nm, which is in good qualitative agreement with the simulated value. However, there is a disagreement between the experimental and the simulated results when the wavelength ranges from 1607 to 1630 nm, which can be considered as due to the unpolarized source used in the transmission measurement.

  11. Novel and simple route to fabricate 2D ordered gold nanobowl arrays based on 3D colloidal crystals.

    PubMed

    Rao, Yanying; Tao, Qin; An, Ming; Rong, Chunhui; Dong, Jian; Dai, Yurong; Qian, Weiping

    2011-11-01

    In this study, we present a new method to fabricate large-area two-dimensionally (2D) ordered gold nanobowl arrays based on 3D colloidal crystals by wet chemosynthesis, which combines the advantages of a very simple preparation and an applicability to "real" nanomaterials. By combination of in situ growth of gold nanoshell (GNSs) arrays based on three-dimensional (3D) colloidal silica crystals, a monolayer ordered reversed GNS array (2D ordered GNS array) was conveniently manufactured by an acrylic ester modified biaxial oriented polypropylene (BOPP). 2D ordered gold nanobowl array with adjustable periodic holes, good stability, reproducibility, and repeatability could be obtained when the silica core was etched by HF solution. The surface-enhanced Raman scattering (SERS) enhancement factor (EF) of this 2D ordered gold nanobowl array could reach 1.27 × 10(7), which shows high SERS enhancing activity and can be used as a universal SERS substrate. PMID:21932785

  12. Thermally Driven Photonic Actuator Based on Silica Opal Photonic Crystal with Liquid Crystal Elastomer.

    PubMed

    Xing, Huihui; Li, Jun; Shi, Yang; Guo, Jinbao; Wei, Jie

    2016-04-13

    We have developed a novel thermoresponsive photonic actuator based on three-dimensional SiO2 opal photonic crystals (PCs) together with liquid crystal elastomers (LCEs). In the process of fabrication of such a photonic actuator, the LCE precursor is infiltrated into the SiO2 opal PC followed by UV light-induced photopolymerization, thereby forming the SiO2 opal PC/LCE composite film with a bilayer structure. We find that this bilayer composite film simultaneously exhibits actuation behavior as well as the photonic band gap (PBG) response to external temperature variation. When the SiO2 opal PC/LCE composite film is heated, it exhibits a considerable bending deformation, and its PBG shifts to a shorter wavelength at the same time. In addition, this actuation is quite fast, reversible, and highly repeatable. The thermoresponsive behavior of the SiO2 opal PC/LCE composite films mainly derives from the thermal-driven change of nematic order of the LCE layer which leads to the asymmetric shrinkage/expansion of the bilayer structure. These results will be of interest in designing optical actuator systems for environment-temperature detection. PMID:26996608

  13. Topological modes in one-dimensional solids and photonic crystals

    NASA Astrophysics Data System (ADS)

    Atherton, Timothy J.; Butler, Celia A. M.; Taylor, Melita C.; Hooper, Ian R.; Hibbins, Alastair P.; Sambles, J. Roy; Mathur, Harsh

    2016-03-01

    It is shown theoretically that a one-dimensional crystal with time-reversal and particle-hole symmetries is characterized by a topological invariant that predicts the existence or otherwise of edge states. This is confirmed experimentally through the construction and simulation of a photonic crystal analog in the microwave regime. It is shown that the edge mode couples to modes external to the photonic crystal via a Fano resonance.

  14. 2D-ordered dielectric sub-micron bowls on a metal surface: a useful hybrid plasmonic-photonic structure

    NASA Astrophysics Data System (ADS)

    Lan, Yue; Wang, Shiqiang; Yin, Xianpeng; Liang, Yun; Dong, Hao; Gao, Ning; Li, Jian; Wang, Hui; Li, Guangtao

    2016-07-01

    Recently, it has been demonstrated that the combination of periodic dielectric structures with metallic structures provides an efficient means to yield a synergetic optical response or functionality in the resultant hybrid plasmonic-photonic systems. In this work, a new hybrid plasmonic-photonic structure of 2D-ordered dielectric sub-micron bowls on a flat gold surface was proposed, prepared, and theoretically and experimentally characterized. This hybrid structure supports two types of modes: surface plasmon polaritons bound at the metallic surface and waveguided mode of light confined in the cavity of bowls. Optical responses of this hybrid structure as well as the spatial electric field distribution of each mode are found to be strongly dependent on the structural parameters of this system, and thus could be widely modified on demand. Importantly, compared to the widely studied hybrid systems, namely the flat metallic surface coated with a monolayer array of latex spheres, the waveguided mode with strong field enhancement appearing in the cavities of bowls is more facilely accessible and thus suitable for practical use. For demonstration, a 2D-ordered silica sub-micron bowl array deposited on a flat gold surface was fabricated and used as a regenerable platform for fluorescence enhancement by simply accommodating emitters in bowls. All the simulation and experiment results indicate that the 2D-ordered dielectric sub-micron bowls on a metal surface should be a useful hybrid plasmonic-photonic system with great potential for applications such as sensors or tunable emitting devices if appropriate periods and materials are employed.Recently, it has been demonstrated that the combination of periodic dielectric structures with metallic structures provides an efficient means to yield a synergetic optical response or functionality in the resultant hybrid plasmonic-photonic systems. In this work, a new hybrid plasmonic-photonic structure of 2D-ordered dielectric sub

  15. Wave propagation in photonic crystals and metamaterials: Surface waves, nonlinearity and chirality

    SciTech Connect

    Wang, Bingnan

    2009-01-01

    Photonic crystals and metamaterials, both composed of artificial structures, are two interesting areas in electromagnetism and optics. New phenomena in photonic crystals and metamaterials are being discovered, including some not found in natural materials. This thesis presents my research work in the two areas. Photonic crystals are periodically arranged artificial structures, mostly made from dielectric materials, with period on the same order of the wavelength of the working electromagnetic wave. The wave propagation in photonic crystals is determined by the Bragg scattering of the periodic structure. Photonic band-gaps can be present for a properly designed photonic crystal. Electromagnetic waves with frequency within the range of the band-gap are suppressed from propagating in the photonic crystal. With surface defects, a photonic crystal could support surface modes that are localized on the surface of the crystal, with mode frequencies within the band-gap. With line defects, a photonic crystal could allow the propagation of electromagnetic waves along the channels. The study of surface modes and waveguiding properties of a 2D photonic crystal will be presented in Chapter 1. Metamaterials are generally composed of artificial structures with sizes one order smaller than the wavelength and can be approximated as effective media. Effective macroscopic parameters such as electric permittivity ϵ, magnetic permeability μ are used to characterize the wave propagation in metamaterials. The fundamental structures of the metamaterials affect strongly their macroscopic properties. By designing the fundamental structures of the metamaterials, the effective parameters can be tuned and different electromagnetic properties can be achieved. One important aspect of metamaterial research is to get artificial magnetism. Metallic split-ring resonators (SRRs) and variants are widely used to build magnetic metamaterials with effective μ < 1 or even μ < 0. Varactor based

  16. 2D-ordered dielectric sub-micron bowls on a metal surface: a useful hybrid plasmonic-photonic structure.

    PubMed

    Lan, Yue; Wang, Shiqiang; Yin, Xianpeng; Liang, Yun; Dong, Hao; Gao, Ning; Li, Jian; Wang, Hui; Li, Guangtao

    2016-07-21

    Recently, it has been demonstrated that the combination of periodic dielectric structures with metallic structures provides an efficient means to yield a synergetic optical response or functionality in the resultant hybrid plasmonic-photonic systems. In this work, a new hybrid plasmonic-photonic structure of 2D-ordered dielectric sub-micron bowls on a flat gold surface was proposed, prepared, and theoretically and experimentally characterized. This hybrid structure supports two types of modes: surface plasmon polaritons bound at the metallic surface and waveguided mode of light confined in the cavity of bowls. Optical responses of this hybrid structure as well as the spatial electric field distribution of each mode are found to be strongly dependent on the structural parameters of this system, and thus could be widely modified on demand. Importantly, compared to the widely studied hybrid systems, namely the flat metallic surface coated with a monolayer array of latex spheres, the waveguided mode with strong field enhancement appearing in the cavities of bowls is more facilely accessible and thus suitable for practical use. For demonstration, a 2D-ordered silica sub-micron bowl array deposited on a flat gold surface was fabricated and used as a regenerable platform for fluorescence enhancement by simply accommodating emitters in bowls. All the simulation and experiment results indicate that the 2D-ordered dielectric sub-micron bowls on a metal surface should be a useful hybrid plasmonic-photonic system with great potential for applications such as sensors or tunable emitting devices if appropriate periods and materials are employed. PMID:27349558

  17. A compact acousto-optic lens for 2D and 3D femtosecond based 2-photon microscopy

    PubMed Central

    Kirkby, Paul A.; Naga Srinivas, N.K.M.; Silver, R. Angus

    2010-01-01

    We describe a high speed 3D Acousto-Optic Lens Microscope (AOLM) for femtosecond 2-photon imaging. By optimizing the design of the 4 AO Deflectors (AODs) and by deriving new control algorithms, we have developed a compact spherical AOL with a low temporal dispersion that enables 2-photon imaging at 10-fold lower power than previously reported. We show that the AOLM can perform high speed 2D raster-scan imaging (>150 Hz) without scan rate dependent astigmatism. It can deflect and focus a laser beam in a 3D random access sequence at 30 kHz and has an extended focusing range (>137 μm; 40X 0.8NA objective). These features are likely to make the AOLM a useful tool for studying fast physiological processes distributed in 3D space PMID:20588506

  18. Interferometry based multispectral photon-limited 2D and 3D integral image encryption employing the Hartley transform.

    PubMed

    Muniraj, Inbarasan; Guo, Changliang; Lee, Byung-Geun; Sheridan, John T

    2015-06-15

    We present a method of securing multispectral 3D photon-counted integral imaging (PCII) using classical Hartley Transform (HT) based encryption by employing optical interferometry. This method has the simultaneous advantages of minimizing complexity by eliminating the need for holography recording and addresses the phase sensitivity problem encountered when using digital cameras. These together with single-channel multispectral 3D data compactness, the inherent properties of the classical photon counting detection model, i.e. sparse sensing and the capability for nonlinear transformation, permits better authentication of the retrieved 3D scene at various depth cues. Furthermore, the proposed technique works for both spatially and temporally incoherent illumination. To validate the proposed technique simulations were carried out for both the 2D and 3D cases. Experimental data is processed and the results support the feasibility of the encryption method. PMID:26193568

  19. Large-area 2D periodic crystalline silicon nanodome arrays on nanoimprinted glass exhibiting photonic band structure effects.

    PubMed

    Becker, C; Lockau, D; Sontheimer, T; Schubert-Bischoff, P; Rudigier-Voigt, E; Bockmeyer, M; Schmidt, F; Rech, B

    2012-04-01

    Two-dimensional silicon nanodome arrays are prepared on large areas up to 50 cm² exhibiting photonic band structure effects in the near-infrared and visible wavelength region by downscaling a recently developed fabrication method based on nanoimprint-patterned glass, high-rate electron-beam evaporation of silicon, self-organized solid phase crystallization and wet-chemical etching. The silicon nanodomes, arranged in square lattice geometry with 300 nm lattice constant, are optically characterized by angular resolved reflection measurements, allowing the partial determination of the photonic band structure. This experimentally determined band structure agrees well with the outcome of three-dimensional optical finite-element simulations. A 16% photonic bandgap is predicted for an optimized geometry of the silicon nanodome arrays. By variation of the duration of the selective etching step, the geometry as well as the optical properties of the periodic silicon nanodome arrays can be controlled systematically. PMID:22422473

  20. Coupling light in photonic crystal waveguides: A review

    NASA Astrophysics Data System (ADS)

    Dutta, Hemant Sankar; Goyal, Amit Kumar; Srivastava, Varun; Pal, Suchandan

    2016-07-01

    Submicron scale structures with high index contrast are key to compact structures for realizing photonic integrated structures. Ultra-compact optical devices in silicon-on-insulator (SOI) substrates serve compatibility with semiconductor fabrication technology leading to reduction of cost and mass production. Photonic crystal structures possess immense potential for realizing various compact optical devices. However, coupling light to photonic crystal waveguide structures is crucial in order to achieve strong transmission and wider bandwidth of signal. Widening of bandwidth will increase potential for various applications and high transmission will make easy signal detection at the output. In this paper, the techniques reported so far for coupling light in photonic crystal waveguides have been reviewed and analyzed so that a comprehensive guide for an efficient coupling to photonic crystal waveguides can be made possible.

  1. Analytical description of 2D magnetic Freedericksz transition in a rectangular cell of a nematic liquid crystal.

    PubMed

    Burylov, S V; Zakhlevnykh, A N

    2016-06-01

    We study the Freedericksz transition induced by a magnetic field in a rectangular cell filled with a nematic liquid crystal. In the initial state the director of the nematic liquid crystal is uniformly aligned in the cross section plane of the cell with rigid anchoring of the director at cell walls: planar on the top and bottom walls, and homeotropic on the left and right ones. The magnetic field is directed perpendicular to the cell cross section plane. We consider two-dimensional (2D) orientational deformations of the nematic liquid crystal in the rectangular cell and determine the critical value of the Freedericksz transition field above which these orientational deformations occur. The 2D expression for the director alignment profile above the threshold of Freedericksz transition is analytically found and the profile shapes as functions of cell sizes, values of the Frank elastic constants of the nematic liquid crystal and the magnetic field are studied. PMID:27349554

  2. Effect of temperature and electric field on 2D nematic colloidal crystals stabilised by vortex-like topological defects.

    PubMed

    Zuhail, K P; Dhara, Surajit

    2016-08-10

    We report experimental studies on 2D colloidal crystals of dimers stabilized by vortex-like defects in planar nematic and π/2 twisted nematic cells. The dimers are prepared and self-assembled using a laser tweezer. We study the effect of temperature and electric field on the lattice parameters of the colloidal crystals. The lattice parameters vary with the temperature in the nematic phase and a discontinuous structural change is observed at the nematic to smectic-A phase transition. In the nematic phase, we observed a large change in the lattice parameters (≃30%) by applying an external electric field perpendicular to the plane of the 2D crystals. The idea and the active control of the lattice parameters could be useful for designing tunable colloidal crystals. PMID:27445255

  3. Fabrication of two-dimensional photonic crystal films with As2S3 by laser holography

    NASA Astrophysics Data System (ADS)

    Aboudihab, Ismail; Ech-Chamikh, El Maati; Lessard, Roger A.

    2004-10-01

    We have fabricated 2D photonic crystal films by holographic method. Scanning Electron Microscope (SEM) and Atomic Force Microscope (AFM) images show that the structures are two- dimensional in the sub-micrometric scale and the structure is perfectly ordered. The dimension in the plane of the films can be up to 50x50 mm2. Both triangular and square Lattices were made. Band structure was also simulated using the plane wave expansion method. We tried in particular to better control the fabrication process in order to have the photonic gap in the desired wavelength range.

  4. Three dimensional reflectance properties of superconductor-dielectric photonic crystal

    NASA Astrophysics Data System (ADS)

    Pandey, G. N.; Pandey, J. P.; Pandey, U. K.; Sancheti, Bhagyashree; Ojha, S. P.

    2016-05-01

    In this present communication, we have studied the optical properties of Photonics Crystals with super conducting constituent using the TMM method for a stratified medium. We also studied the three dimensional reflectance property of superconductor-dielectric photonic crystal at different temperature and thickness. From above study we show that the superconductor-dielectric photonic crystal may be used as broad band reflector and omnidirectional reflector at low temperature below to the critical temperature. Such property may be applied to make of the reflector which can be used in low temperature region.

  5. Three-Dimensional Photonic Crystal Laser-Driven Accelerator Structures

    SciTech Connect

    Cowan, B.; /SLAC

    2006-09-07

    We discuss simulated photonic crystal structure designs for laser-driven particle acceleration, focusing on three-dimensional planar structures based on the so-called ''woodpile'' lattice. We describe guiding of a speed-of-light accelerating mode by a defect in the photonic crystal lattice and discuss the properties of this mode, including particle beam dynamics and potential coupling methods for the structure. We also discuss possible materials and power sources for this structure and their effects on performance parameters, as well as possible manufacturing techniques and the required tolerances. In addition we describe the computational technique and possible improvements in numerical modeling that would aid development of photonic crystal structures.

  6. Recent progress and novel applications of photonic crystal fibers

    NASA Astrophysics Data System (ADS)

    Arismar Cerqueira, S., Jr.

    2010-02-01

    Photonic crystal fibers present a wavelength-scale periodic microstructure running along their length. Their core and two-dimensional photonic crystal might be based on varied geometries and materials, enabling light guidance due to different propagation mechanisms in an extremely large wavelength range, extending to the terahertz regions. As a result, these fibers have revolutionized the optical fiber technology by means of creating new degrees of freedom in the fiber design, fabrication and applicability. This report aims to provide a detailed statement on the recent progress and novel potential applications of photonic crystal fibers.

  7. Quantitative modeling of fluorescent emission in photonic crystals

    NASA Astrophysics Data System (ADS)

    Gutmann, Johannes; Zappe, Hans; Goldschmidt, Jan Christoph

    2013-11-01

    Photonic crystals affect the photon emission of embedded emitters due to an altered local density of photon states (LDOS). We review the calculation of the LDOS from eigenmodes in photonic crystals and propose a rate equation model for fluorescent emitters to determine the changes in emission induced by the LDOS. We show how to calculate the modifications of three experimentally accessible characteristics: emission spectrum (spectral redistribution), emitter quantum yield, and fluorescence lifetime. As an example, we present numerical results for the emission of the dye Rhodamine B inside an opal photonic crystal. For such photonic crystals with small permittivity contrast, the LDOS is only weakly modified, resulting in rather small changes. We point out that in experiments, however, usually only part of the emitted light is detected, which can have a very different spectral distribution (e.g., due to a photonic band gap in the direction of detection). We demonstrate the calculation of this detected spectrum for a typical measurement setup. With this reasoning, we explain the previously not fully understood experimental observation that strong spectral modifications occurred, while at the same time only small changes in lifetime were found. With our approach, the mentioned effects can be quantitatively calculated for fluorescent emitters in any photonic crystal.

  8. Photochemistry in photonic crystal fiber nanoreactors.

    PubMed

    Chen, Jocelyn S Y; Euser, Tijmen G; Farrer, Nicola J; Sadler, Peter J; Scharrer, Michael; Russell, Philip St J

    2010-05-17

    We report the use of a liquid-filled hollow-core photonic crystal fiber (PCF) as a highly controlled photochemical reactor. Hollow-core PCFs have several major advantages over conventional sample cells: the sample volume per optical path length is very small (2.8 nL cm(-1) in the fiber used), long optical path lengths are possible as a result of very low intrinsic waveguide loss, and furthermore the light travels in a diffractionless single mode with a constant transverse intensity profile. As a proof of principle, the (very low) quantum yield of the photochemical conversion of vitamin B(12), cyanocobalamin (CNCbl) to hydroxocobalamin ([H(2)OCbl](+)) in aqueous solution was measured for several pH values from 2.5 to 7.5. The dynamics of the actively induced reaction were monitored in real-time by broadband absorption spectroscopy. The PCF nanoreactor required ten thousand times less sample volume compared to conventional techniques. Furthermore, the enhanced sensitivity and optical pump intensity implied that even systems with very small quantum yields can be measured very quickly--in our experiments one thousand times faster than in a conventional cuvette. PMID:20391563

  9. Topological Z2 Gapless Photonic Crystals

    NASA Astrophysics Data System (ADS)

    Xie, Biye; Wang, Zidan

    Topological properties of electronic materials with gapless band structure such as Topological Semimetals(TSMs) and Topological Metals(TMs) have drew lots of attention to both theoretical and experimental physicists recently. Although theoretical prediction of TSMs and TMs have been done well, experimental study of them is quite difficult to perform due to the fact that it is very difficult to control and design certain electronic materials. However, since the topological properties stem from the geometric feature, we can study them in Photonic Crystals(PhCs) which are much easy to be controlled and designed. Here we study 2-dimension PhCs consisting of gyrotropic materials with hexagonal structure. In the Brillouin corner, the dispersion relation has gapless points which are similar to Dirac Cones in electronic materials. We firstly derive the effective Hamiltonian of this system and show that if certain perturbation is added to this effective Hamiltonian, this system belongs to AII class according to Altland and Zirbauer topological classification and is described by a Z2 topological charge. Finally we also propose a way to detect this Z2 topological charge using momentum space Aharonov-Bohm interferometer which is firstly proposed by L.Duca and T.Li,etc.

  10. Optics in Microstructured and Photonic Crystal Fibers

    NASA Astrophysics Data System (ADS)

    Knight, J. C.

    2008-10-01

    The development of optical fibers with two-dimensional patterns of air holes running down their length has reinvigorated research in the field of fiber optics. It has greatly—and fundamentally—broadened the range of specialty optical fibers, by demonstrating that optical fibers can be more "special" than previously thought. Fibers with air cores have made it possible to deliver energetic femtosecond-scale optical pulses, transform limited, as solitons, using single-mode fiber. Other fibers with anomalous dispersion at visible wavelengths have spawned a new generation of single-mode optical supercontinuum sources, spanning visible and near-infrared wavelengths and based on compact pump sources. A third example is in the field of fiber lasers, where the use of photonic crystal fiber concepts has led to a new hybrid laser technology, in which the very high numerical aperture available sing air holes have enabled fibers so short they are more naturally held straight than bent. This paper describes some of the basic physics and technology behind these developments, illustrated with some of the impressive demonstrations of the past 18 months.

  11. Formation of 2D colloidal crystals by the Langmuir-Blodgett technique monitored in situ by Brewster angle microscopy.

    PubMed

    Gil, Alvaro; Guitián, Francisco

    2007-03-01

    We report a method that combines Brewster angle microscopy and Langmuir-Blodgett films technique to obtain highly ordered 2D colloidal crystals of nanospheres. The deposition of Langmuir-Blodgett films of silica spheres monitored by Brewster angle microscopy allows to determine with accuracy the best physical conditions to transfer highly ordered monolayers of nanoparticles. PMID:17184789

  12. Tunable complete photonic band gap in anisotropic photonic crystal slabs with non-circular air holes using liquid crystals

    NASA Astrophysics Data System (ADS)

    Fathollahi Khalkhali, T.; Bananej, A.

    2016-06-01

    In this study, we analyze the tunability of complete photonic band gap of square and triangular photonic crystal slabs composed of square and hexagonal air holes in anisotropic tellurium background with SiO2 as cladding material. The non-circular holes are infiltrated with liquid crystal. Using the supercell method based on plane wave expansion, we study the variation of complete band gap by changing the optical axis orientation of liquid crystal. Our numerical results show that noticeable tunability of complete photonic band gap can be obtained in both square and triangular structures with non-circular holes.

  13. Two-pattern compound photonic crystals with a large complete photonic band gap

    SciTech Connect

    Jia Lin; Thomas, Edwin L.

    2011-09-15

    We present a set of two-dimensional aperiodic structures with a large complete photonic band gap (PBG), which are named two-pattern photonic crystals. By superposing two substructures without regard to registration, we designed six new aperiodic PBG structures having a complete PBG larger than 15% for {epsilon}{sub 2}/{epsilon}{sub 1} = 11.4. The rod-honeycomb two-pattern photonic crystal provides the largest complete PBG to date. An aperiodic structure becomes the champion structure with the largest PBG. Surprisingly, the TM and TE gaps of a two-pattern photonic crystal are much less interdependent than the PBGs of conventional photonic crystals proposed before, affording interesting capabilities for us to tune the TM and TE PBGs separately. By altering the respective substructures, optical devices for different polarizations (TE, TM, or both) can readily be designed.

  14. Photonic Crystal and Photonic Band-Gap Structures for Light Extraction and Emission Control

    NASA Astrophysics Data System (ADS)

    de La Rue, Richard M.

    Research into photonic crystal (PhC) and photonic band-gap (PBG) structures has been motivated, from the start, by their possible use in controlling, modifying and enhancing the light emission process from high refractive index solid materials. This chapter considers the possible role of such structures when incorporated into semiconductor diode based light-emitting devices. Both light-emitting diodes (LEDs) and lasers will be considered. In order to provide a proper framework for discussion and analysis, space is devoted to the historical development of III-V semiconductor based LEDs — and to competing alternative approaches that have been demonstrated for enhanced light extraction. The possible advantages of photonic quasi-crystal (PQC) structures over regularly periodic photon crystal structures for advanced LED designs are also considered. Photonic crystal structures potentially provide major enhancements in the performance of laser diodes (LDs) — and progress towards this performance enhancement will be reviewed.

  15. Photonic crystals for improving light absorption in organic solar cells

    SciTech Connect

    Duché, D. Le Rouzo, J.; Masclaux, C.; Gourgon, C.

    2015-02-07

    We theoretically and experimentally study the structuration of organic solar cells in the shape of photonic crystal slabs. By taking advantage of the optical properties of photonic crystals slabs, we show the possibility to couple Bloch modes with very low group velocities in the active layer of the cells. These Bloch modes, also called slow Bloch modes (SBMs), allow increasing the lifetime of photons within the active layer. Finally, we present experimental demonstration performed by using nanoimprint to directly pattern the standard poly-3-hexylthiophène:[6,6]-phenyl-C61-butiryc acid methyl ester organic semiconductor blend in thin film form in the shape of a photonic crystal able to couple SBMs. In agreement with the model, optical characterizations will demonstrate significant photonic absorption gains.

  16. Imaging of protein crystals with two–photon microscopy†

    PubMed Central

    Padayatti, Pius; Palczewska, Grazyna; Sun, Wenyu; Palczewski, Krzysztof; Salom, David

    2012-01-01

    Second–order non–linear optical imaging of chiral crystals (SONICC), that portrays second harmonic generation (SHG) by non–centrosymmetric crystals, is emerging as a powerful imaging technique for protein crystals in media opaque to visible light because of its high signal–to–noise ratio. Here we report the incorporation of both SONICC and two–photon excited fluorescence (TPEF) into one imaging system that allows visualization of crystals as small as ~10 μm in their longest dimension. Using this system, we then documented an inverse correlation between the level of symmetry in examined crystals and the intensity of their SHG. Moreover, because of blue-green TPEF exhibited by most tested protein crystals, we also could identify and image SHG–silent protein crystals. Our experimental data suggests that the TPEF in protein crystals is mainly caused by the oxidation of tryptophan residues. Additionally, we found that unspecific fluorescent dyes are able to bind to lysozyme crystals and enhance their detection by TPFE. We finally confirmed that the observed fluorescence was generated by a two-photon rather than a three-photon process. The capability for imaging small protein crystals in turbid or opaque media with non–damaging infrared light in a single system, makes the combination of SHG and intrinsic visible TPEF a powerful tool for non–destructive protein crystal identification and characterization during crystallization trials. PMID:22324807

  17. Imaging of Protein Crystals with Two-Photon Microscopy

    SciTech Connect

    Padayatti, Pius; Palczewska, Grazyna; Sun, Wenyu; Palczewski, Krzysztof; Salom, David

    2012-05-02

    Second-order nonlinear optical imaging of chiral crystals (SONICC), which portrays second-harmonic generation (SHG) by noncentrosymmetric crystals, is emerging as a powerful imaging technique for protein crystals in media opaque to visible light because of its high signal-to-noise ratio. Here we report the incorporation of both SONICC and two-photon excited fluorescence (TPEF) into one imaging system that allows visualization of crystals as small as 10 {mu}m in their longest dimension. Using this system, we then documented an inverse correlation between the level of symmetry in examined crystals and the intensity of their SHG. Moreover, because of blue-green TPEF exhibited by most tested protein crystals, we also could identify and image SHG-silent protein crystals. Our experimental data suggest that the TPEF in protein crystals is mainly caused by the oxidation of tryptophan residues. Additionally, we found that unspecific fluorescent dyes are able to bind to lysozyme crystals and enhance their detection by TPEF. We finally confirmed that the observed fluorescence was generated by a two-photon rather than a three-photon process. The capability for imaging small protein crystals in turbid or opaque media with nondamaging infrared light in a single system makes the combination of SHG and intrinsic visible TPEF a powerful tool for nondestructive protein crystal identification and characterization during crystallization trials.

  18. The research on a photonic-crystal fiber sensor

    NASA Astrophysics Data System (ADS)

    Peng, Yong; Cheng, Yi

    2009-07-01

    To study the photonic-crystal fiber applied in the chemical sensor, the photonic-crystal fiber was used as transmission medium. With Sol-Gel method, we selective coated thin film containing fluorescent probe in the photonic-crystal fiber core, then attained an excellent photonic-crystal fiber acetylcholinesterase sensor. The sensor could be applied in biological / chemical research, clinical medicine, environmental protection, food inspection, biochemical preventive war field and so on. In organophosphorus pesticide residue testing, the experimental results indicated that the linear measurement range could arrive to 1×10-9~ 1×10-3 mol/L, moreover the detection limit is 1×10-10 mol/L.

  19. Enhanced spontaneous Raman scattering using a photonic crystal fiber

    SciTech Connect

    Buric, M.P.; Falk, J.; Chen, K.; Woodruff, S.D.

    2008-07-22

    The output power from spontaneous gas-phase Raman scattering is enhanced using a hollow-core photonic crystal fiber for the gas cell and Stokes light collector, yielding >100 times enhancement over a free-space configuration.

  20. Enhanced Spontaneous Raman Scattering using a Photonic Crystal Fiber

    SciTech Connect

    M.P. Buric; J. Fal; K. Chen; S. Woodruff1

    2007-10-01

    The output power from spontaneous gas-phase Raman scattering is enhanced using a hollow-core photonic crystal fiber for the gas cell and Stokes light collector, yielding >100 times enhancement over a free-space configuration.

  1. Parallel FE Electron-Photon Transport Analysis on 2-D Unstructured Mesh

    SciTech Connect

    Drumm, C.R.; Lorenz, J.

    1999-03-02

    A novel solution method has been developed to solve the coupled electron-photon transport problem on an unstructured triangular mesh. Instead of tackling the first-order form of the linear Boltzmann equation, this approach is based on the second-order form in conjunction with the conventional multi-group discrete-ordinates approximation. The highly forward-peaked electron scattering is modeled with a multigroup Legendre expansion derived from the Goudsmit-Saunderson theory. The finite element method is used to treat the spatial dependence. The solution method is unique in that the space-direction dependence is solved simultaneously, eliminating the need for the conventional inner iterations, a method that is well suited for massively parallel computers.

  2. Use of a photonic crystal for optical amplifier gain control

    DOEpatents

    Lin, Shawn-Yu; Fleming, James G.; El-Kady, Ihab

    2006-07-18

    An optical amplifier having a uniform gain profile uses a photonic crystal to tune the density-of-states of a gain medium so as to modify the light emission rate between atomic states. The density-of-states of the gain medium is tuned by selecting the size, shape, dielectric constant, and spacing of a plurality of microcavity defects in the photonic crystal. The optical amplifier is particularly useful for the regeneration of DWDM signals in long optical fibers.

  3. Photonic-crystal time-domain simulations using Wannier functions.

    PubMed

    Blum, Christian; Wolff, Christian; Busch, Kurt

    2011-01-15

    We present a Wannier-function-based time-domain method for photonic-crystal integrated optical circuits. In contrast to other approaches, this method allows one to trade CPU time against memory consumption and therefore is particularly well suited for the treatment of large-scale systems. As an illustration, we apply the method to the design of a photonic-crystal-based sensor, which utilizes a dual Mach-Zehnder-Fano interferometer. PMID:21263535

  4. Measurements of HB photonic crystal fibers with low temperature sensitivity

    NASA Astrophysics Data System (ADS)

    Makara, Mariusz; Wojcik, Jan; Mergo, Pawel; Klimek, Jacek; Skorupski, Krzysztof; Kopeć, Jarosław

    2008-06-01

    We report on experimental studies of phase and group modal birefringence vs. temperature in two highly birefringent (HB) photonic crystal fibers, in which birefringence is caused by filling factor asymmetry. The sensitivity measurements were carried out at two wavelengths 633 and 834 nm. Our results show that temperature sensitivity in the HB photonic crystal fibers is two orders smaller then in traditional HB fibers. Simultaneously, our results exhibit weak dependence of group modal birefringence on temperature.

  5. Two-photon absorption in Hg 2Cl 2 crystals

    NASA Astrophysics Data System (ADS)

    Pelant, I.; Ambrož, M.; Hála, J.; Kohlová, V.; Barta, Č.

    1985-01-01

    Violet luminescence (396 nm) of Hg 2Cl 2 single crystals was observed under excitation of green light (∼ 500 nm) of a pulsed dye laser at liquid helium temperature. The effect is interpreted as due to the two-photon absorption process. The two-photon excitation spectrum of the luminescence was measured in the wavelength range 475-530 nm. Possible mechanisms of the two-photon transition are outlined.

  6. Quantitative analysis of molecular-level DNA crystal growth on a 2D surface

    PubMed Central

    Lee, Junwye; Hamada, Shogo; Hwang, Si Un; Amin, Rashid; Son, Junyoung; Dugasani, Sreekantha Reddy; Murata, Satoshi; Park, Sung Ha

    2013-01-01

    Crystallization is an essential process for understanding a molecule's aggregation behavior. It provides basic information on crystals, including their nucleation and growth processes. Deoxyribonucleic acid (DNA) has become an interesting building material because of its remarkable properties for constructing various shapes of submicron-scale DNA crystals by self-assembly. The recently developed substrate-assisted growth (SAG) method produces fully covered DNA crystals on various substrates using electrostatic interactions and provides an opportunity to observe the overall crystallization process. In this study, we investigated quantitative analysis of molecular-level DNA crystallization using the SAG method. Coverage and crystal size distribution were studied by controlling the external parameters such as monomer concentration, annealing temperature, and annealing time. Rearrangement during crystallization was also discussed. We expect that our study will provide overall picture of the fabrication process of DNA crystals on the charged substrate and promote practical applications of DNA crystals in science and technology. PMID:23817625

  7. Polarisation singularities in photonic crystals for an on-chip spin-photon interface

    NASA Astrophysics Data System (ADS)

    Beggs, Daryl M.; Young, Andrew B.; Thijssen, Arthur C. T.; Oulton, Ruth

    2015-03-01

    Integrated quantum photonic chips are a leading contender for future quantum technologies, which aim to use the entanglement and superposition properties of quantum physics to speed up the manipulation of data. Quantum information may be stored and transmitted in photons, which make excellent flying qubits. Photons suffer little from decoherence, and single qubit gates performed by changing photon phase, are straightforward. Less straightforward is the ability to create two qubit gates, where one photon is used to switch another's state; inherently difficult due to the extremely small interaction cross-section between photons. The required deterministic two-qubit interactions will likely need a hybrid scheme with the ``flying'' photonic qubit interacting with a ``static'' matter qubit. Here we present the design of a photonic crystal waveguide structure that can couple electron-spin to photon path, thus providing an interface between a static and a flying qubit. We will show that the complex polarization properties inherent in the photonic crystal eigenmodes supports polarization singularities - positions in the electric field vector where one of the parameters describing the local polarization ellipse is singular - and that these singularities are ideal for a range of quantum information applications. In particular, we will show that by placing a quantum dot at one of these singularities, the electron-spin becomes correlated with the photon emission direction, creating an in-plane spin-photon interface that can transfer quantum information from static to flying qubits.

  8. Alignment of crystal orientations of the multi-domain photonic crystals in Parides sesostris wing scales.

    PubMed

    Yoshioka, S; Fujita, H; Kinoshita, S; Matsuhana, B

    2014-03-01

    It is known that the wing scales of the emerald-patched cattleheart butterfly, Parides sesostris, contain gyroid-type photonic crystals, which produce a green structural colour. However, the photonic crystal is not a single crystal that spreads over the entire scale, but it is separated into many small domains with different crystal orientations. As a photonic crystal generally has band gaps at different frequencies depending on the direction of light propagation, it seems mysterious that the scale is observed to be uniformly green under an optical microscope despite the multi-domain structure. In this study, we have carefully investigated the structure of the wing scale and discovered that the crystal orientations of different domains are not perfectly random, but there is a preferred crystal orientation that is aligned along the surface normal of the scale. This finding suggests that there is an additional factor during the developmental process of the microstructure that regulates the crystal orientation. PMID:24352678

  9. Alignment of crystal orientations of the multi-domain photonic crystals in Parides sesostris wing scales

    PubMed Central

    Yoshioka, S.; Fujita, H.; Kinoshita, S.; Matsuhana, B.

    2014-01-01

    It is known that the wing scales of the emerald-patched cattleheart butterfly, Parides sesostris, contain gyroid-type photonic crystals, which produce a green structural colour. However, the photonic crystal is not a single crystal that spreads over the entire scale, but it is separated into many small domains with different crystal orientations. As a photonic crystal generally has band gaps at different frequencies depending on the direction of light propagation, it seems mysterious that the scale is observed to be uniformly green under an optical microscope despite the multi-domain structure. In this study, we have carefully investigated the structure of the wing scale and discovered that the crystal orientations of different domains are not perfectly random, but there is a preferred crystal orientation that is aligned along the surface normal of the scale. This finding suggests that there is an additional factor during the developmental process of the microstructure that regulates the crystal orientation. PMID:24352678

  10. 1D Metallo-Dielectric Photonic Crystals as Selective Emitters for Thermophotovoltaic Applications

    NASA Astrophysics Data System (ADS)

    Narayanaswamy, Arvind; Cybulski, James; Chen, Gang

    2004-11-01

    Spectrally selective thermal radiators that are easy to fabricate is a key ingredient in increasing the efficiency of thermophotovoltaic energy converters. 2D and 3D photonic crystals have been proposed as selective emitters with good control over spectral emission and fabricated. Due to their structural complexity, they are difficult to fabricate. 1D photonic crystals have not been analyzed completely for their spectral emission characteristics. Using a method of dyadic Green's function technique and the fluctuation-dissipation theorem, we have analyzed thermal emission from planarly layered periodic media. 1D photonic crystals made of alternate layers of ultra-thin metallic films in-between dielectric layers exhibit selective emission properties ideal for thermophotovoltaic applications with GaSb photovoltaic cells. By varying the thickness of the dielectric layer, the frequency around which the emitters transitions from lower emissivity to higher emissivity can be altered. It is possible to increase this transition frequency to optical frequencies by replacing the metallic film with a high band gap semiconductor like SiC. Preliminary results from experiments on 1D photonic crystals made of alternating layers of tungsten and alumina will be presented.

  11. Photonic crystals, light manipulation, and imaging in complex nematic structures

    NASA Astrophysics Data System (ADS)

    Ravnik, Miha; Å timulak, Mitja; Mur, Urban; Čančula, Miha; Čopar, Simon; Žumer, Slobodan

    2016-03-01

    Three selected approaches for manipulation of light by complex nematic colloidal and non-colloidal structures are presented using different own custom developed theoretical and modelling approaches. Photonic crystals bands of distorted cholesteric liquid crystal helix and of nematic colloidal opals are presented, also revealing distinct photonic modes and density of states. Light propagation along half-integer nematic disclinations is shown with changes in the light polarization of various winding numbers. As third, simulated light transmission polarization micrographs of nematic torons are shown, offering a new insight into the complex structure characterization. Finally, this work is a contribution towards using complex soft matter in optics and photonics for advanced light manipulation.

  12. Chalcogenide glass-based three-dimensional photonic crystals

    NASA Astrophysics Data System (ADS)

    Feigel, A.; Kotler, Z.; Sfez, B.; Arsh, A.; Klebanov, M.; Lyubin, V.

    2000-11-01

    AsSeTe chalcogenide glasses are materials that are photosensitive and have a large refractive index. These properties make these glasses particularly suitable for the fabrication of photonic crystals. We present a way to build three-dimensional photonic structures from chalcogenide glasses using vapor deposition and direct holographic writing. We show that this technique is intrinsically self-aligned, providing a simple way to build layer-by-layer photonic crystals and a four-layer structure demonstrating the principle of the technique.

  13. Low-loss Y-junction two-dimensional magneto-photonic crystals circulator using a ferrite cylinder

    NASA Astrophysics Data System (ADS)

    Wang, Yong; Zhang, Dengguo; Xu, Shixiang; Ouyang, Zhengbiao; Li, Jingzhen

    2016-06-01

    A new defect structure of two-dimensional magnetic-photonic crystal is given and a new three-port Y-junction circulator using a ferrite cylinder is proposed in this short paper. Based on the agreements between the resonance frequency of micro-cavity constructed by a point defect in the 2D triangular lattice photonic crystal with those numerical results of corresponding literatures, external characteristics of the circulator were calculated by the plane wave expansion method and finite element method. According to the scaling theory of Maxwell's equations, a 3 cm Y-junction 2D MPCs circulator is developed by scaling the radius of the center ferrite cylinder. The results show that there is a significant improvement for insertion loss 0.062 dB and isolation 26.2 dB compared with those in literatures.

  14. Simulations of the infrared, Raman, and 2D-IR photon echo spectra of water in nanoscale silica pores

    DOE PAGESBeta

    Burris, Paul C.; Laage, Damien; Thompson, Ward H.

    2016-05-20

    Vibrational spectroscopy is frequently used to characterize nanoconfined liquids and probe the effect of the confining framework on the liquid structure and dynamics relative to the corresponding bulk fluid. However, it is still unclear what molecular-level information can be obtained from such measurements. In this Paper, we address this question by using molecular dynamics (MD) simulations to reproduce the linear infrared (IR), Raman, and two-dimensional IR (2D-IR) photon echo spectra for water confined within hydrophilic (hydroxyl-terminated) silica mesopores. To simplify the spectra the OH stretching region of isotopically dilute HOD in D2O is considered. An empirical mapping approach is usedmore » to obtain the OH vibrational frequencies, transition dipoles, and transition polarizabilities from the MD simulations. The simulated linear IR and Raman spectra are in good general agreement with measured spectra of water in mesoporous silica reported in the literature. The key effect of confinement on the water spectrum is a vibrational blueshift for OH groups that are closest to the pore interface. The blueshift can be attributed to the weaker hydrogen bonds (H-bonds) formed between the OH groups and silica oxygen acceptors. Non-Condon effects greatly diminish the contribution of these OH moieties to the linear IR spectrum, but these weaker H-bonds are readily apparent in the Raman spectrum. The 2D-IR spectra have not yet been measured and thus the present results represent a prediction. Lastly, the simulated spectra indicate that it should be possible to probe the slower spectral diffusion of confined water compared to the bulk liquid by analysis of the 2D-IR spectra.« less

  15. Simulations of the infrared, Raman, and 2D-IR photon echo spectra of water in nanoscale silica pores.

    PubMed

    Burris, Paul C; Laage, Damien; Thompson, Ward H

    2016-05-21

    Vibrational spectroscopy is frequently used to characterize nanoconfined liquids and probe the effect of the confining framework on the liquid structure and dynamics relative to the corresponding bulk fluid. However, it is still unclear what molecular-level information can be obtained from such measurements. In this paper, we address this question by using molecular dynamics (MD) simulations to reproduce the linear infrared (IR), Raman, and two-dimensional IR (2D-IR) photon echo spectra for water confined within hydrophilic (hydroxyl-terminated) silica mesopores. To simplify the spectra the OH stretching region of isotopically dilute HOD in D2O is considered. An empirical mapping approach is used to obtain the OH vibrational frequencies, transition dipoles, and transition polarizabilities from the MD simulations. The simulated linear IR and Raman spectra are in good general agreement with measured spectra of water in mesoporous silica reported in the literature. The key effect of confinement on the water spectrum is a vibrational blueshift for OH groups that are closest to the pore interface. The blueshift can be attributed to the weaker hydrogen bonds (H-bonds) formed between the OH groups and silica oxygen acceptors. Non-Condon effects greatly diminish the contribution of these OH moieties to the linear IR spectrum, but these weaker H-bonds are readily apparent in the Raman spectrum. The 2D-IR spectra have not yet been measured and thus the present results represent a prediction. The simulated spectra indicates that it should be possible to probe the slower spectral diffusion of confined water compared to the bulk liquid by analysis of the 2D-IR spectra. PMID:27208967

  16. Simulations of the infrared, Raman, and 2D-IR photon echo spectra of water in nanoscale silica pores

    NASA Astrophysics Data System (ADS)

    Burris, Paul C.; Laage, Damien; Thompson, Ward H.

    2016-05-01

    Vibrational spectroscopy is frequently used to characterize nanoconfined liquids and probe the effect of the confining framework on the liquid structure and dynamics relative to the corresponding bulk fluid. However, it is still unclear what molecular-level information can be obtained from such measurements. In this paper, we address this question by using molecular dynamics (MD) simulations to reproduce the linear infrared (IR), Raman, and two-dimensional IR (2D-IR) photon echo spectra for water confined within hydrophilic (hydroxyl-terminated) silica mesopores. To simplify the spectra the OH stretching region of isotopically dilute HOD in D2O is considered. An empirical mapping approach is used to obtain the OH vibrational frequencies, transition dipoles, and transition polarizabilities from the MD simulations. The simulated linear IR and Raman spectra are in good general agreement with measured spectra of water in mesoporous silica reported in the literature. The key effect of confinement on the water spectrum is a vibrational blueshift for OH groups that are closest to the pore interface. The blueshift can be attributed to the weaker hydrogen bonds (H-bonds) formed between the OH groups and silica oxygen acceptors. Non-Condon effects greatly diminish the contribution of these OH moieties to the linear IR spectrum, but these weaker H-bonds are readily apparent in the Raman spectrum. The 2D-IR spectra have not yet been measured and thus the present results represent a prediction. The simulated spectra indicates that it should be possible to probe the slower spectral diffusion of confined water compared to the bulk liquid by analysis of the 2D-IR spectra.

  17. Controllable light diffraction in woodpile photonic crystals filled with liquid crystal

    SciTech Connect

    Ho, Chih-Hua; Zeng, Hao; Wiersma, Diederik S.; Cheng, Yu-Chieh; Maigyte, Lina; Trull, Jose; Cojocaru, Crina; Staliunas, Kestutis

    2015-01-12

    An approach to switching between different patterns of light beams transmitted through the woodpile photonic crystals filled with liquid crystals is proposed. The phase transition between the nematic and isotropic liquid crystal states leads to an observable variation of the spatial pattern transmitted through the photonic structure. The transmission profiles in the nematic phase also show polarization sensibility due to refractive index dependence on the field polarization. The experimental results are consistent with a numerical calculation by Finite Difference Time Domain method.

  18. A computational study of dielectric photonic-crystal-based accelerator cavities

    NASA Astrophysics Data System (ADS)

    Bauer, C. A.

    Future particle accelerator cavities may use dielectric photonic crystals to reduce harmful wakefields and increase the accelerating electric field (or gradient). Reduced wakefields are predicted based on the bandgap property of some photonic crystals (i.e. frequency-selective reflection/transmission). Larger accelerating gradients are predicted based on certain dielectrics' strong resistance to electrical breakdown. Using computation, this thesis investigated a hybrid design of a 2D sapphire photonic crystal and traditional copper conducting cavity. The goals were to test the claim of reduced wakefields and, in general, judge the effectiveness of such structures as practical accelerating cavities. In the process, we discovered the following: (1) resonant cavities in truncated photonic crystals may confine radiation weakly compared to conducting cavities (depending on the level of truncation); however, confinement can be dramatically increased through optimizations that break lattice symmetry (but retain certain rotational symmetries); (2) photonic crystal cavities do not ideally reduce wakefields; using band structure calculations, we found that wakefields are increased by flat portions of the frequency dispersion (where the waves have vanishing group velocities). A complete comparison was drawn between the proposed photonic crystal cavities and the copper cavities for the Compact Linear Collider (CLIC); CLIC is one of the candidates for a future high-energy electron-positron collider that will study in greater detail the physics learned at the Large Hadron Collider. We found that the photonic crystal cavity, when compared to the CLIC cavity: (1) can lower maximum surface magnetic fields on conductors (growing evidence suggests this limits accelerating gradients by inducing electrical breakdown); (2) shows increased transverse dipole wakefields but decreased longitudinal monopole wakefields; and (3) exhibits lower accelerating efficiencies (unless

  19. Manipulating light propagation and emission using photonic crystals

    SciTech Connect

    Nair, Rajesh V.; Jagatap, B. N.

    2014-03-31

    We discuss the synthesis and characterization of self-assembled photonic crystals using polymer colloids having sub-micron diameters. The angle resolved optical reflectivity measurements indicate the hybridization between stop gaps in the multiple Bragg diffraction regimes. Each diffraction resonances in the multiple Bragg diffraction regimes are assigned to respective crystal planes. We also discuss laser-induced studies of spontaneous emission in self-assembled photonic crystals having Rhodamine-B dye doped colloids. Our experimental results reveal more than 51% inhibition in emission intensity within the stop gap as compared to a proper reference sample.

  20. Multi-direction high-efficiency second harmonic generation in ellipse structure nonlinear photonic crystals

    SciTech Connect

    Chen, Bao-Qin; Zhang, Chao; Liu, Rong-Juan; Li, Zhi-Yuan

    2014-10-13

    We have designed and fabricated a lithium niobate (LN) nonlinear photonic crystal (NPC) with a two-dimensional (2D) ellipse structure of inverse poling domains. The structure can offer continuously varying reciprocal lattice vectors in different directions to compensate the phase-mismatching during the second harmonic generation (SHG) for diverse pump wavelengths. We consider three propagation directions with large effective nonlinear susceptibility and measure the nonlinear conversion efficiency of SHG. The experimental data are in good agreement with the quantitative calculation results using the effective susceptibility model with pump depletion. With high-efficiency SHG in multiple propagation direction, the 2D ellipse structure of LN NPC has the potential to realize various broadband nonlinear frequency conversion processes in different propagation direction with a single crystal.

  1. Three dimensional silicon photonic crystals fabricated by two photon phase mask lithography.

    SciTech Connect

    Wiltzius, P.; Braun, P. V.; Liao, H.; Brzezinski, A.; Chen, Y. C.; Nelson, E.; Shir, D.; Rogers, J. A.; Bogart, Katherine Huderle Andersen

    2008-08-01

    We describe the fabrication of silicon three dimensional photonic crystals using polymer templates defined by a single step, two-photon exposure through a layer of photopolymer with relief molded on its surface. The resulting crystals exhibit high structural quality over large areas, displaying geometries consistent with calculation. Spectroscopic measurements of transmission and reflection through the silicon and polymer structures reveal excellent optical properties, approaching properties predicted by simulations that assume ideal layouts.

  2. Tunable optical anisotropy in three-dimensional photonic crystals

    SciTech Connect

    Che Ming; Li Zhiyuan; Liu Rongjuan

    2007-08-15

    Artificial optical birefringence can be realized in three-dimensional photonic crystals with a uniaxial structural symmetry: e.g., woodpile photonic crystals with a tetragonal lattice structure in the long-wavelength limit. The ordinary and extraordinary indices of refraction are determined from calculation of the reflection coefficient for a plane wave incident on the surface of a semi-infinite photonic crystal at different angles. We find that the anisotropy can be widely tuned by simply changing the width and thickness of the dielectric rod. A large relative negative anisotropy over 33% is found. A transition from positive anisotropy to negative anisotropy can be readily achieved. At certain parameters, a structurally anisotropic nanostructure can behave like an optically isotropic medium. Our study opens a window to use artificial nanostructures to create an arbitrary optical anisotropy that is not possible in natural crystals.

  3. Photon Cascade from a Single Crystal Phase Nanowire Quantum Dot.

    PubMed

    Bouwes Bavinck, Maaike; Jöns, Klaus D; Zieliński, Michal; Patriarche, Gilles; Harmand, Jean-Christophe; Akopian, Nika; Zwiller, Val

    2016-02-10

    We report the first comprehensive experimental and theoretical study of the optical properties of single crystal phase quantum dots in InP nanowires. Crystal phase quantum dots are defined by a transition in the crystallographic lattice between zinc blende and wurtzite segments and therefore offer unprecedented potential to be controlled with atomic layer accuracy without random alloying. We show for the first time that crystal phase quantum dots are a source of pure single-photons and cascaded photon-pairs from type II transitions with excellent optical properties in terms of intensity and line width. We notice that the emission spectra consist often of two peaks close in energy, which we explain with a comprehensive theory showing that the symmetry of the system plays a crucial role for the hole levels forming hybridized orbitals. Our results state that crystal phase quantum dots have promising quantum optical properties for single photon application and quantum optics. PMID:26806321

  4. Gigahertz Modulation of a Photonic Crystal Cavity

    NASA Astrophysics Data System (ADS)

    Ali, Aaron Karim Taylor

    Photonic crystal (PtC) cavities are an increasingly important way to create all optical methods to control optical data. Not only must the data be controlled, but interfacing it with high frequency electrical signals is particularly interesting especially if this occurs in the 1.55microm telecom band. We present an experiment that uses Rayleigh surface acoustic waves (SAWs) to modulate the frequency of the guided mode of an L3-cavity PtC created on a silicon slab. This work has the potential to interface optical and electrical signals via a mechanical strain wave operating at gigahertz frequencies. Defects are carefully designed into a triangular lattice PtC to realize a waveguide coupled optical cavity. The cavity can be experimentally accessed through grating couplers excited by polarized light at 10° incidence from normal. The optical components are fabricated on a silicon-on-insulator platform, with light confined to the silicon slab region. Through transmission experiments, the L3 cavity was found to have a narrow resonance characterized by a Lorentzian distribution. A quality factor of 165 centered at 6255cm --1 (1.599microm) was measured. Aluminum interdigitated transducers (IDTs) were fabricated through a lithography liftoff process. Their ability to create SAWs requires a piezoelectric medium. As silicon does not have this property, growth of a thin ZnO film was required. The transducers were measured using a network analyzer and were found to produce Rayleigh SAWs at a frequency of 179MHz and a wavelength of 24microm. The acoustic energy traveled 70microm to the target optical device. The L3 cavity has dimensions of around 4microm a side - less than 1/2 a SAW wavelength. Modulation of the L3 PtC resonant frequency was monitored through a repeat of the transmission experiment but with RF excitation of the IDTs at the SAW frequency. A broadening of the transmission spectrum was expected. Unfortunately no change in the fitting parameters could be measured

  5. Controlling single-photon transport with three-level quantum dots in photonic crystals

    NASA Astrophysics Data System (ADS)

    Yan, Cong-Hua; Jia, Wen-Zhi; Wei, Lian-Fu

    2014-03-01

    We investigate how to control single-photon transport along the photonic crystal waveguide with the recent experimentally demonstrated artificial atoms [i.e., Λ-type quantum dots (QDs)] [S. G. Carter et al., Nat. Photon. 7, 329 (2013), 10.1038/nphoton.2013.41] in an all-optical way. Adopting full quantum theory in real space, we analytically calculate the transport coefficients of single photons scattered by a Λ-type QD embedded in single- and two-mode photonic crystal cavities (PCCs), respectively. Our numerical results clearly show that the photonic transmission properties can be exactly manipulated by adjusting the coupling strengths of waveguide-cavity and QD-cavity interactions. Specifically, for the PCC with two degenerate orthogonal polarization modes coupled to a Λ-type QD with two degenerate ground states, we find that the photonic transmission spectra show three Rabi-splitting dips and the present system could serve as single-photon polarization beam splitters. The feasibility of our proposal with the current photonic crystal technique is also discussed.

  6. Electron momentum distribution and singlet-singlet annihilation in the organic anthracene molecular crystals using positron 2D-ACAR and fluorescence spectroscopy.

    PubMed

    Selvakumar, Sellaiyan; Sivaji, Krishnan; Arulchakkaravarthi, Arjunan; Sankar, Sambasivam

    2014-08-14

    We present the mapping of electron momentum distribution (EMD) in a single crystal of anthracene by two-dimensional angular correlation of positron annihilation radiation (2D-ACAR). The projected EMD is explained on the basis of the crystallographic features of the material. The EMD spectra provide information about the positron states and their behavior and also about the hindrance of the positronium (Ps) formation in this material. The EMD has exhibited evidence for the absence of free volume defects. The characteristic EMD features regarding the delocalized electronic states are explained. Further, scintillation characteristics such as fluorescence and time-correlated single photon counting have also been studied. The emission peaks are attributed to vibrational bands of fluorescence emission from the singlet excitons and lifetime components are observed to be due to singlet fission and the singlet-singlet excitons annihilation. PMID:24963608

  7. A novel polarization splitter based on octagonal dualcore photonic crystal fiber

    NASA Astrophysics Data System (ADS)

    Ma, Yong; Zou, Hui; Wei, Wei

    2016-07-01

    A novel polarization splitter based on octagonal dual-core photonic crystal fiber (O-D-PCF) is proposed. The impacts of several fiber parameters on the coupling characteristics of the polarization splitter are investigated by full-vectorial finite element method (FV-FEM) in detail. Through optimizing the fiber configuration, a 4.267-mm-long polarization splitter with a bandwidth of 37 nm is achieved, and its extinction ratio ( ER) is as high as 81.2 dB at the wavelength of 1.55 μm. Compared with the hexagonal dual-core photonic crystal fiber (H-D-PCF) based polarization splitter, both ER and bandwidth of the O-D-PCF based one are effectively improved.

  8. Fabrication and characterization of three-dimensional infrared photonic crystals

    NASA Astrophysics Data System (ADS)

    Zavieh, Lisa

    It has been predicted theoretically that photonic crystals can be used to control the propagation of light through dielectric media for wavelengths extending beyond the microwave to include the infrared and the visible. Fabrication of 3-D photonic crystals with a bandgap in the near infrared or visible would have application in the design of a new class of photonic devices that include optical mirrors, waveguides, and cavity resonators. Demonstrations of 3-D photonic crystals have been limited primarily to the microwave and infrared wavelength regimes because of the constraints imposed by the nanometer scale dimensions required for operation in the visible. This thesis presents a novel method of fabricating a simple cubic photonic crystal which potentially can be tailored to operate at any wavelength. Fabrication was broken down into several processing steps, each of which was investigated independently. Design of Experiment (DOE) was used in a parametric study to optimize dry etching conditions by which GaAs/AlxGa1--x As multilayer structures were etched with anisotropic profile and rapid etch rate. Also, the etching properties of diffusion controlled wet lateral etching of buried AlxGa1--xAs layers in hydrofluoric acid solutions (HF) were investigated. Using the results obtained from the etching studies, both dry and wet etching techniques were employed to fabricate the simple-cubic photonic structure. Following fabrication, the photonic crystal was characterized at normal angles and oblique incidence using Fourier transform infrared spectroscopy (FTIR). The experimental results show strong correlation to theoretically predicted values. The simplicity of the process and positive results indicate that it may be possible to scale down the structure to obtain an photonic band lattice with a bandgap of 1.55 mum.

  9. Photonic Crystals: A view of the future

    NASA Astrophysics Data System (ADS)

    Norris, David J.

    2007-03-01

    Despite intense research efforts, no three-dimensional materials with a photonic bandgap for visible wavelengths have yet been fabricated. A new self-assembly strategy lays out the route towards the realization of this dream.

  10. Thermally tunable ferroelectric thin film photonic crystals.

    SciTech Connect

    Lin, P. T.; Wessels, B. W.; Imre, A.; Ocola, L. E.; Northwestern Univ.

    2008-01-01

    Thermally tunable PhCs are fabricated from ferroelectric thin films. Photonic band structure and temperature dependent diffraction are calculated by FDTD. 50% intensity modulation is demonstrated experimentally. This device has potential in active ultra-compact optical circuits.

  11. Tunable negative-index photonic crystals using colloidal magnetic fluids

    NASA Astrophysics Data System (ADS)

    Geng, Tao; Wang, Xin; Wang, Yan; Dong, Xiang-Mei

    2015-12-01

    The model of using colloidal magnetic fluid to build tunable negative-index photonic crystal is established. The effective permittivity ɛe and permeability μe of the two-dimensional photonic crystal are investigated in detail. For transverse magnetic polarization, both ɛe and μe exhibit a Lorentz-type anomalous dispersion, leading to a region where ɛe and μe are simultaneously negative. Then, considering a practical case, in which the thickness of photonic crystal is finite, the band structures for odd modes are calculated by the plane wave expansion method and the finite-difference time-domain method. The results suggest that reducing the external magnetic field strength or slab thickness will weaken the periodic modulation strength of the photonic crystal. Simulation results prove that the negative-index can be tuned by varying the external magnetic field strength or the slab thickness. The work presented in this paper gives a guideline for realizing the flat photonic crystal lens with tunable properties at optical frequencies, which may have potential applications in tunable near-field imaging systems. Project supported by the National Basic Research Program of China (Grant No. 2015CB352001), the Shanghai Rising-Star Program, China (Grant No. 12QA1402300), the China Scholarship Council (CSC) Program, and the Basic Research Program of Shanghai, China (Grant No. 14ZR1428500).

  12. Dispersive photonic crystals from the plane wave method

    NASA Astrophysics Data System (ADS)

    Guevara-Cabrera, E.; Palomino-Ovando, M. A.; Flores-Desirena, B.; Gaspar-Armenta, J. A.

    2016-03-01

    Nowadays photonic crystals are widely used in many different applications. One of the most used methods to compute their band structure is the plane wave method (PWM). However, it can only be applied directly to non-dispersive media and be extended to systems with a few model dielectric functions. We explore an extension of the PWM to photonic crystals containing dispersive materials, that solves an eigenvalue equation for the Bloch wave vectors. First we compare our calculation with analytical results for one dimensional photonic crystals containing Si using experimental values of its optical parameters, and obtainig very well agreement, even for the spectrum region with strong absorption. Then, using the same method, we computed the band structure for a two dimensional photonic crystal without absorption, formed by an square array of MgO cylinders in air. The optical parameters for MgO were modeled with the Lorentz dielectric function. Finally, we studied an array of MgO cylinders in a metal, using Drude model without absorption, for the metal dielectric function. For this last case, we study the gap-midgap ratio as a function of the filling fraction for both the square and triangular lattice. The gap-midgap ratio is larger for the triangular lattice, with a maximum value of 10% for a filling fraction of 0.6. Our results show that the method can be applied to dispersive materials, and then to a wide range of applications where photonic crystals can be used.

  13. 3D holographic polymer photonic crystal for superprism application

    NASA Astrophysics Data System (ADS)

    Chen, Jiaqi; Jiang, Wei; Chen, Xiaonan; Wang, Li; Zhang, Sasa; Chen, Ray T.

    2007-02-01

    Photonic crystal based superprism offers a new way to design new optical components for beam steering and DWDM application. 3D photonic crystals are especially attractive as they could offer more control of the light beam based on the needs. A polygonal prism based holographic fabrication method has been demonstrated for a three-dimensional face-centered-cubic (FCC)-type submicron polymer photonic crystal using SU8 as the photo-sensitive material. Therefore antivibration equipment and complicated optical alignment system are not needed and the requirement for the coherence of the laser source is relaxed compared with the traditional holographic setup. By changing the top-cut prism structure, the polarization of the laser beam, the exposure and development conditions we can achieve different kinds of triclinic or orthorhombic photonic crystals on demand. Special fabrication treatments have been introduced to ensure the survivability of the fabricated large area (cm2) nano-structures. Scanning electron microscopy and diffraction results proved the good uniformity of the fabricated structures. With the proper design of the refraction prism we have achieved a partial bandgap for S+C band (1460-1565nm) in the [111] direction. The transmission and reflection spectra obtained by Fourier transform infrared spectroscopy (FTIR) are in good agreement with simulated band structure. The superprism effects around 1550nm wavelength for the fabricated 3D polymer photonic crystal have been theoretically calculated and such effects can be used for beam steering purpose.

  14. Slow light in nonlinear photonic crystal coupled-cavity waveguides

    NASA Astrophysics Data System (ADS)

    Zhu, Na; Wang, Yige; Ren, Qingqing; Zhu, Li; Yuan, Minmin; An, Guimin

    2014-04-01

    Nonlinear photonic crystals can be formed by inserting Kerr-type nonlinear dielectric rods into perfect photonic crystals. Based on nonlinear photonic crystal, nonlinear photonic crystal coupled-cavity waveguide is constructed and its slow light properties are studied by using the Plane Wave expansion Method (PWM). Both single-defect coupled cavity and two-defect coupled cavity are proposed to optimize slow light properties. The result shows that using single-defect coupled cavity in waveguide is beneficial to obtain larger Normalized Delay-Bandwidth Product (NDBP) but it contributes little to decrease the group velocity of light and enlarging Q factor and delay time; While using two-defect cavity in waveguide can efficiently reduce the group velocity of light and enlarge Q factor and delay time. Compared to normal structures, our new designed nonlinear photonic crystal coupled cavity waveguide owns group velocity that is three magnitudes smaller than the vacuum speed of light. Delay time is of magnitude order of 10 ns and Q factor is of magnitude order of 1000, it means less loss and higher ability of storing energy.

  15. Phenomenological study of binding in optically trapped photonic crystals

    NASA Astrophysics Data System (ADS)

    Maystre, D.; Vincent, P.

    2007-08-01

    We describe a phenomenological theory of the phenomenon of binding observed both experimentally and numerically when particles are trapped by an interference system in order to make a structure close to a photonic crystal. This theory leads to a very simple conclusion, which links the binding phenomenon to the bottom of the lowest bandgap of the trapped crystal in a given direction. The phenomenological theory allows one to calculate the period of the trapped crystal by using numerical tools on dispersion diagrams of photonic crystals. It emerges that the agreement of our theory with our rigorous numerical results given in a previous paper [J. Opt A8, 1059 (2006)] is better than 2% on the crystal period. Furthermore, it is shown that in two-dimensional problems and s polarization, all the optical forces derive from a scalar potential.

  16. Nonorthogonal FDTD simulations for photonic band structures, states density, and transmission/reflection of photonic crystals

    NASA Astrophysics Data System (ADS)

    Le, Zichun; Yang, Yang; Quan, Bisheng; Wang, Weibiao; Wang, Xiaoxiao; Chi, Yongjiang; Ma, Lingfang

    2005-01-01

    Photonic crystals have been widely studied in the fields of physics, material science and optical information technology. In general, the standard rectangular finite difference time domain (FDTD) method is used to predict the performances of photonic crystals. It is however very time consuming and inefficient. The current authors developed a software called GCFE, which is based on a non-orthogonal FDTD method. The software can be used to predict the photonic band structures, photonic states density and transmission and/or reflection coefficients for one-dimensional to three-dimensional photonic crystals. In the present paper, the derivations of the discrete Maxwell"s equations in time-domain and space-domain and the derivation of the discrete transfer matrix in real-space domain are briefly described firstly. In addition, the design idea and the functions of GCFE version 2.0.00 are introduced. Moreover, the band structures, transmission and reflection coefficients and photonic states density for the photonic crystal with cube lattice are calculated by our GCFE software, and numerical application results are also shown.

  17. Photonic crystals composed of virtual pillars with magnetic walls: Photonic band gaps and double Dirac cones

    NASA Astrophysics Data System (ADS)

    Kim, Seong-Han; Kim, Soeun; Kee, Chul-Sik

    2016-08-01

    Photonic crystals composed of virtual pillars with magnetic walls are proposed. A virtual pillar with a magnetic wall can be created inside a parallel perfect electric conductor plate waveguide by introducing a circular perfect magnetic conductor patch in the upper perfect electric conductor plate of the waveguide. The virtual pillar mimics a perfect magnetic conductor pillar with a radius less than that of the circular patch because electromagnetic waves can slightly penetrate the wall. Furthermore, the photonic band structures of a triangular photonic crystal composed of virtual pillars for the transverse electromagnetic modes of the waveguide are investigated. They are very similar to those of a triangular photonic crystal composed of infinitely long perfect electric conductor cylinders for transverse magnetic modes. The similarity between the two different photonic crystals is well understood by the boundary conditions of perfect electric and magnetic conductor surfaces. A double Dirac cone at the center of the Brillouin zone is observed and thus the virtual pillar triangular photonic crystal can act a zero-refractive-index material at the Dirac point frequency.

  18. Photonic-crystal-based all-optical NOT logic gate.

    PubMed

    Singh, Brahm Raj; Rawal, Swati

    2015-12-01

    In the present paper, we have utilized the concept of photonic crystals for the implementation of an optical NOT gate inverter. The designed structure has a hexagonal arrangement of silicon rods in air substrate. The logic function is based on the phenomenon of the existence of the photonic bandgap and resulting guided modes in defect photonic crystal waveguides. We have plotted the transmission, extinction ratio, and tolerance analysis graphs for the structure, and it has been observed that the maximum output is obtained for a telecom wavelength of 1.554 μm. Dispersion curves are obtained using the plane wave expansion method, and the transmission is simulated using the finite element method. The proposed structure is applicable for photonic integrated circuits due to its simple structure and clear operating principle. PMID:26831380

  19. Excitation enhancement and extraction enhancement with photonic crystals

    SciTech Connect

    Shapira, Ofer; Soljacic, Marin; Zhen, Bo; Chua, Song-Liang; Lee, Jeongwon; Joannopoulos, John

    2015-03-03

    Disclosed herein is a system for stimulating emission from at least one an emitter, such as a quantum dot or organic molecule, on the surface of a photonic crystal comprising a patterned dielectric substrate. Embodiments of this system include a laser or other source that illuminates the emitter and the photonic crystal, which is characterized by an energy band structure exhibiting a Fano resonance, from a first angle so as to stimulate the emission from the emitter at a second angle. The coupling between the photonic crystal and the emitter may result in spectral and angular enhancement of the emission through excitation and extraction enhancement. These enhancement mechanisms also reduce the emitter's lasing threshold. For instance, these enhancement mechanisms enable lasing of a 100 nm thick layer of diluted organic molecules solution with reduced threshold intensity. This reduction in lasing threshold enables more efficient organic light emitting devices and more sensitive molecular sensing.

  20. Compact Couplers for Photonic Crystal Laser-Driven Accelerator Structures

    SciTech Connect

    Cowan, Benjamin; Lin, M.C.; Schwartz, Brian; Byer, Robert; McGuinness, Christopher; Colby, Eric; England, Robert; Noble, Robert; Spencer, James; /SLAC

    2012-07-02

    Photonic crystal waveguides are promising candidates for laser-driven accelerator structures because of their ability to confine a speed-of-light mode in an all-dielectric structure. Because of the difference between the group velocity of the waveguide mode and the particle bunch velocity, fields must be coupled into the accelerating waveguide at frequent intervals. Therefore efficient, compact couplers are critical to overall accelerator efficiency. We present designs and simulations of high-efficiency coupling to the accelerating mode in a three-dimensional photonic crystal waveguide from a waveguide adjoining it at 90{sup o}. We discuss details of the computation and the resulting transmission. We include some background on the accelerator structure and photonic crystal-based optical acceleration in general.

  1. Preparation, structural, and calorimetric characterization of bicomponent metallic photonic crystals

    NASA Astrophysics Data System (ADS)

    Kozlov, M. E.; Murthy, N. S.; Udod, I.; Khayrullin, I. I.; Baughman, R. H.; Zakhidov, A. A.

    2007-03-01

    We report preparation and characterization of novel bicomponent metal-based photonic crystals having submicron three-dimensional (3D) periodicity. Fabricated photonic crystals include SiO2 sphere lattices infiltrated interstitially with metals, carbon inverse lattices filled with metal or metal alloy spheres, Sb inverse lattices, and Sb inverse lattices filled with Bi spheres. Starting from a face centered SiO2 lattice template, these materials were obtained by sequences of either templating and template extraction or templating, template extraction, and retemplating. Surprising high fidelity was obtained for all templating and template extraction steps. Scanning electron microscopy (SEM), small angle X-ray scattering (SAXS) and differential scanning calorimetry (DSC) were used to characterize the structure and the effects of the structure on calorimetric properties. To the best of our knowledge, SAXS data on metallic photonic crystals were collected for first time.

  2. Tuning and Freezing Disorder in Photonic Crystals using Percolation Lithography

    NASA Astrophysics Data System (ADS)

    Burgess, Ian B.; Abedzadeh, Navid; Kay, Theresa M.; Shneidman, Anna V.; Cranshaw, Derek J.; Lončar, Marko; Aizenberg, Joanna

    2016-01-01

    Although common in biological systems, synthetic self-assembly routes to complex 3D photonic structures with tailored degrees of disorder remain elusive. Here we show how liquids can be used to finely control disorder in porous 3D photonic crystals, leading to complex and hierarchical geometries. In these optofluidic crystals, dynamically tunable disorder is superimposed onto the periodic optical structure through partial wetting or evaporation. In both cases, macroscopic symmetry breaking is driven by subtle sub-wavelength variations in the pore geometry. These variations direct site-selective infiltration of liquids through capillary interactions. Incorporating cross-linkable resins into our liquids, we developed methods to freeze in place the filling patterns at arbitrary degrees of partial wetting and intermediate stages of drying. These percolation lithography techniques produced permanent photonic structures with adjustable disorder. By coupling strong changes in optical properties to subtle differences in fluid behavior, optofluidic crystals may also prove useful in rapid analysis of liquids.

  3. Photonic crystal fiber long-period gratings for biochemical sensing

    NASA Astrophysics Data System (ADS)

    Rindorf, Lars; Jensen, Jesper B.; Dufva, Martin; Hagsholm Pedersen, Lars; Høiby, Poul Erik; Bang, Ole

    2006-09-01

    We present experimental results showing that long-period gratings in photonic crystal fibers can be used as sensitive biochemical sensors. A layer of biomolecules was immobilized on the sides of the holes of the photonic crystal fiber and by observing the shift in the resonant wavelength of a long-period grating it was possible to measure the thickness of the layer. The long-period gratings were inscribed in a large-mode area silica photonic crystal fiber with a CO2 laser. The thicknesses of a monolayer of poly-L-lysine and double-stranded DNA was measured using the device. We find that the grating has a sensitivity of approximately 1.4nm/1nm in terms of the shift in resonance wavelength in nm per nm thickness of biomolecule layer.

  4. Parametric Simulations of Slanted 1D Photonic Crystal Sensors

    NASA Astrophysics Data System (ADS)

    Breuer-Weil, Aaron; Almasoud, Naif Nasser; Abbasi, Badaruddin; Yetisen, Ali K.; Yun, Seok-Hyun; Butt, Haider

    2016-03-01

    Photonic crystals and band gap materials act as manipulators of light and have a plethora of applications. They are made up of stacks of alternating dielectric constants. This article shows the simulations of an inclined, one dimensional and tuneble photonic crystal, using numerical finite element methods. The photonic crystal was made up of silver nanoparticles embedded in a hydrogel matrix and it has the ability to change and recover its periodicity. A series of factors concerning the geometry of the lattice were tested in order to analyze the efficiency, performance and optimize the properties of the optical sensor. These factors range from the size of the nanoparticles and their density within the stacks, to observing the effect of diffraction angle in readouts.

  5. Parametric Simulations of Slanted 1D Photonic Crystal Sensors.

    PubMed

    Breuer-Weil, Aaron; Almasoud, Naif Nasser; Abbasi, Badaruddin; Yetisen, Ali K; Yun, Seok-Hyun; Butt, Haider

    2016-12-01

    Photonic crystals and band gap materials act as manipulators of light and have a plethora of applications. They are made up of stacks of alternating dielectric constants. This article shows the simulations of an inclined, one dimensional and tuneble photonic crystal, using numerical finite element methods. The photonic crystal was made up of silver nanoparticles embedded in a hydrogel matrix and it has the ability to change and recover its periodicity. A series of factors concerning the geometry of the lattice were tested in order to analyze the efficiency, performance and optimize the properties of the optical sensor. These factors range from the size of the nanoparticles and their density within the stacks, to observing the effect of diffraction angle in readouts. PMID:27000025

  6. Optical modulator based on coupled photonic crystal cavities

    NASA Astrophysics Data System (ADS)

    Serafimovich, Pavel G.; Kazanskiy, Nikolay L.

    2016-07-01

    We propose and numerically investigate an optical signal modulator based on two-photonic crystal nanobeam cavities coupled through a waveguide. The suggested modulator shifts the resonant frequency over a scalable range. We design a compact optical modulator based on photonic crystal nanobeams cavities that exhibits high stability to manufacturing. Photonic crystal waveguide tuning in the low-intensity region of the resonant mode is demonstrated. The advantages of the suggested approach over the single-resonator optical modulator approaches include the possibilities to shift the modulator frequency over a scalable range that depends on switching energy level and to effectively electrically tune the device in the low-intensity region of the resonant mode.

  7. Tuning and Freezing Disorder in Photonic Crystals using Percolation Lithography

    PubMed Central

    Burgess, Ian B.; Abedzadeh, Navid; Kay, Theresa M.; Shneidman, Anna V.; Cranshaw, Derek J.; Lončar, Marko; Aizenberg, Joanna

    2016-01-01

    Although common in biological systems, synthetic self-assembly routes to complex 3D photonic structures with tailored degrees of disorder remain elusive. Here we show how liquids can be used to finely control disorder in porous 3D photonic crystals, leading to complex and hierarchical geometries. In these optofluidic crystals, dynamically tunable disorder is superimposed onto the periodic optical structure through partial wetting or evaporation. In both cases, macroscopic symmetry breaking is driven by subtle sub-wavelength variations in the pore geometry. These variations direct site-selective infiltration of liquids through capillary interactions. Incorporating cross-linkable resins into our liquids, we developed methods to freeze in place the filling patterns at arbitrary degrees of partial wetting and intermediate stages of drying. These percolation lithography techniques produced permanent photonic structures with adjustable disorder. By coupling strong changes in optical properties to subtle differences in fluid behavior, optofluidic crystals may also prove useful in rapid analysis of liquids. PMID:26790372

  8. Parity-time-symmetry breaking in two-dimensional photonic crystals: Square lattice

    NASA Astrophysics Data System (ADS)

    Mock, Adam

    2016-06-01

    We consider theoretically materials whose electromagnetic properties possess parity-time (PT ) symmetry and are periodic in two dimensions. When designed for optical frequencies such structures are commonly known as two-dimensional (2D) photonic crystals. With the addition of PT symmetry the optical modes of 2D photonic crystals exhibit thresholdless spontaneous PT -symmetry breaking near the Brillouin zone boundary, which is analogous to what has previously been studied in PT -symmetric structures with one-dimensional periodicity. Consistent with previous work, we find that spontaneous PT -symmetry breaking occurs at band crossings in the photonic dispersion diagram. Due to the extra spatial degree of freedom in 2D periodic systems, their band structures contain more band crossings and higher-order degeneracies than their one-dimensional counterparts. This work provides a comprehensive theoretical analysis of spontaneous PT -symmetry breaking at these points in the band structure. We find that, as in the case of one-dimensional structures, photonic band gaps exist at k =0 . We also find that at points of degeneracy with order higher than 2, bands merge pairwise to form broken-PT -symmetry supermodes. If the degeneracy order is even, this means multiple pairs of bands can form distinct (nondegenerate) broken-symmetry supermodes. If the order of degeneracy is odd, at least one of the bands will have protected PT symmetry. At other points of degeneracy, we find that the PT symmetry of the modes may be protected and we provide a spatial mode symmetry argument to explain this behavior. Finally, we identify a point at which two broken-PT -symmetry supermodes become degenerate, creating a point of fourfold degeneracy in the broken-PT -symmetry regime.

  9. High-Q silicon carbide photonic-crystal cavities

    NASA Astrophysics Data System (ADS)

    Lee, Jonathan Y.; Lu, Xiyuan; Lin, Qiang

    2015-01-01

    We demonstrate one-dimensional photonic-crystal nanobeam cavities in amorphous silicon carbide. The fundamental mode exhibits intrinsic optical quality factor as high as 7.69 × 104 with mode volume ˜ 0.60 ( λ / n ) 3 at wavelength 1.5 μm. A corresponding Purcell factor value of ˜104 is the highest reported to date in silicon carbide optical cavities. The device exhibits great potential for integrated nonlinear photonics and cavity nano-optomechanics.

  10. Enhanced live cell imaging via photonic crystal enhanced fluorescence microscopy.

    PubMed

    Chen, Weili; Long, Kenneth D; Yu, Hojeong; Tan, Yafang; Choi, Ji Sun; Harley, Brendan A; Cunningham, Brian T

    2014-11-21

    We demonstrate photonic crystal enhanced fluorescence (PCEF) microscopy as a surface-specific fluorescence imaging technique to study the adhesion of live cells by visualizing variations in cell-substrate gap distance. This approach utilizes a photonic crystal surface incorporated into a standard microscope slide as the substrate for cell adhesion, and a microscope integrated with a custom illumination source as the detection instrument. When illuminated with a monochromatic light source, angle-specific optical resonances supported by the photonic crystal enable efficient excitation of surface-confined and amplified electromagnetic fields when excited at an on-resonance condition, while no field enhancement occurs when the same photonic crystal is illuminated in an off-resonance state. By mapping the fluorescence enhancement factor for fluorophore-tagged cellular components between on- and off-resonance states and comparing the results to numerical calculations, the vertical distance of labelled cellular components from the photonic crystal substrate can be estimated, providing critical and quantitative information regarding the spatial distribution of the specific components of cells attaching to a surface. As an initial demonstration of the concept, 3T3 fibroblast cells were grown on fibronectin-coated photonic crystals with fluorophore-labelled plasma membrane or nucleus. We demonstrate that PCEF microscopy is capable of providing information about the spatial distribution of cell-surface interactions at the single-cell level that is not available from other existing forms of microscopy, and that the approach is amenable to large fields of view, without the need for coupling prisms, coupling fluids, or special microscope objectives. PMID:25265458

  11. Enhanced live cell imaging via photonic crystal enhanced fluorescence microscopy†

    PubMed Central

    Chen, Weili; Long, Kenneth D.; Yu, Hojeong; Tan, Yafang; Choi, Ji Sun; Harley, Brendan A.; Cunningham, Brian T.

    2014-01-01

    We demonstrate photonic crystal enhanced fluorescence (PCEF) microscopy as a surface-specific fluorescence imaging technique to study the adhesion of live cells by visualizing variations in cell-substrate gap distance. This approach utilizes a photonic crystal surface incorporated into a standard microscope slide as the substrate for cell adhesion, and a microscope integrated with a custom illumination source as the detection instrument. When illuminated with a monochromatic light source, angle-specific optical resonances supported by the photonic crystal enable efficient excitation of surface-confined and amplified electromagnetic fields when excited at an on-resonance condition, while no field enhancement occurs when the same photonic crystal is illuminated in an off-resonance state. By mapping the fluorescence enhancement factor for fluorophore-tagged cellular components between on- and off-resonance states and comparing the results to numerical calculations, the vertical distance of labelled cellular components from the photonic crystal substrate can be estimated, providing critical and quantitative information regarding the spatial distribution of the specific components of cells attaching to a surface. As an initial demonstration of the concept, 3T3 fibroblast cells were grown on fibronectin-coated photonic crystals with fluorophore-labelled plasma membrane or nucleus. We demonstrate that PCEF microscopy is capable of providing information about the spatial distribution of cell-surface interactions at the single-cell level that is not available from other existing forms of microscopy, and that the approach is amenable to large fields of view, without the need for coupling prisms, coupling fluids, or special microscope objectives. PMID:25265458

  12. Photonic crystals from multiply-coated spheres

    NASA Astrophysics Data System (ADS)

    Chan, Che Ting

    2000-03-01

    We show theoretically and experimentally that photonic band gaps can be realized using metal or metal-coated spheres as building blocks. Robust photonic gaps exist in any periodic structure built from such spheres when the filling ratio of the spheres exceeds a threshold, and they are not sensitive to the symmetry or the global long range order, with stacking faults cause almost no degradation. Good agreement between theory and experiment is obtained in the microwave regime. The gaps persist even in a random packing of such spheres. Calculations show that the approach can be scaled up to IR and optical frequencies.

  13. Confinement effects on Brillouin scattering in semiconductor nanowire photonic crystal

    NASA Astrophysics Data System (ADS)

    Mante, Pierre-Adrien; Anttu, Nicklas; Zhang, Wei; Wallentin, Jesper; Chen, I.-Ju; Lehmann, Sebastian; Heurlin, Magnus; Borgström, Magnus T.; Pistol, Mats-Erik; Yartsev, Arkady

    2016-07-01

    Scattering of photons by phonons, or Brillouin scattering, enables manipulation and control of light and has led to revolutionary applications, from slow light to saser and cooling of micromechanical resonators. Recently, enhanced light and sound interaction has been demonstrated in waveguides. However, the design of the waveguide geometry tunes and alters the phonon and photon dispersion simultaneously. Here we investigate, through femtosecond pump-probe spectroscopy and theoretical modeling, the light and sound interaction in a bottom-up fabricated vertical nanowire photonic crystal. In such a system, the phonon dispersion can be tuned by varying the geometry of the constituent nanowires. In contrast, the placement of the nanowires in the photonic crystal can be used for tuning optical array modes, without altering the phonon dispersion. We demonstrate the forward and backward scattering, by acoustic phonons in the nanowires, of (1) such optical array modes and (2) guided modes of the constituent nanowires. Furthermore, our results reveal an enhanced interaction of array modes with phonons that we attribute to the specific scattering mechanism. Our results enable the design of a photonic crystal with separately tailored photon and phonon dispersion for Brillouin scattering. We anticipate these advances to be a starting point for enhanced control of light at the nanoscale.

  14. Polarized quantum dot emission in electrohydrodynamic jet printed photonic crystals

    SciTech Connect

    See, Gloria G.; Xu, Lu; Nuzzo, Ralph G.; Sutanto, Erick; Alleyne, Andrew G.; Cunningham, Brian T.

    2015-08-03

    Tailored optical output, such as color purity and efficient optical intensity, are critical considerations for displays, particularly in mobile applications. To this end, we demonstrate a replica molded photonic crystal structure with embedded quantum dots. Electrohydrodynamic jet printing is used to control the position of the quantum dots within the device structure. This results in significantly less waste of the quantum dot material than application through drop-casting or spin coating. In addition, the targeted placement of the quantum dots minimizes any emission outside of the resonant enhancement field, which enables an 8× output enhancement and highly polarized emission from the photonic crystal structure.

  15. Absorption and emission properties of photonic crystals and metamaterials

    SciTech Connect

    Peng, Lili

    2007-08-03

    We study the emission and absorption properties of photonic crystals and metamaterials using Comsol Multiphysics and Ansoft HFSS as simulation tools. We calculate the emission properties of metallic designs using drude model and the results illustrate that an appropriate termination of the surface of the metallic structure can significantly increase the absorption and therefore the thermal emissivity. We investigate the spontaneous emission rate modifications that occur for emitters inside two-dimensional photonic crystals and find the isotropic and directional emissions with respect to different frequencies as we have expected.

  16. Polarization-independent waveguiding with annular photonic crystals.

    PubMed

    Cicek, Ahmet; Ulug, Bulent

    2009-09-28

    A linear waveguide in an annular photonic crystal composed of a square array of annular dielectric rods in air is demonstrated to guide transverse electric and transverse magnetic modes simultaneously. Overlapping of the guided bands in the full band gap of the photonic crystal is shown to be achieved through an appropriate set of geometric parameters. Results of Finite-Difference Time-Domain simulations to demonstrate polarization-independent waveguiding with low loss and wavelength-order confinement are presented. Transmission through a 90 degrees bend is also demonstrated. PMID:19907629

  17. A Single-Material Logical Junction Based on 2D Crystal PdS2.

    PubMed

    Ghorbani-Asl, Mahdi; Kuc, Agnieszka; Miró, Pere; Heine, Thomas

    2016-02-01

    A single-material logical junction with negligible contact resistance is designed by exploiting quantum-confinement effects in 1T PdS2 . The metallic bilayer serves as electrodes for the semiconducting channel monolayer, avoiding contact resistance. Heat dissipation is then governed by tunnel loss, which becomes negligible at channel lengths larger than 2.45 nm. This value marks the integration limit for a conventional 2D transistor. PMID:26632273

  18. Tunable Photonic Crystal Mach-Zehnder Interferometer Based on Self-collimation Effect

    NASA Astrophysics Data System (ADS)

    Chen, Xi-Yao; Li, Hui; Qiu, Yi-Shen; Wang, Yu-Fei; Ni, Bo

    2008-12-01

    A theoretical model for tunable Mach-Zehnder interferometers (TMZIs) constructed in a two-dimensional photonic crystal (2D PhC) is proposed. The 2D PhC consists of a square lattice of cylindric air holes in silicon. The TMZI includes two mirrors and two splitters. Light propagates between them employing a self-collimation effect. The two interferometer branches have different path lengths. Parts of the longer branch are infiltrated with a kind of liquid crystal (LC) with ordinary and extraordinary refractive indices 1.522 and 1.706, respectively. The transmission spectra at two TMZI output ports are in the shape of sinusoidal curves and have a uniform peak spacing 0.0017c/a in the frequency range from 0.26c/a to 0.27c/a. When the effective refractive index neff of the liquid crystal is increased from 1.522 to 1.706, the peaks shift to the lower frequencies over 0.0017c/a while the peak spacing is almost kept unchanged. Thus this TMZI can work as a tunable power splitter or an optical switch. For the central operating wavelength around 1550nm, its dimensions are only about tens of micron. Thus this device may be applied to photonic integrated circuits.

  19. Yb-doped silica glass and photonic crystal fiber based on laser sintering technology

    NASA Astrophysics Data System (ADS)

    Zhang, Wei; Wu, Jiale; Zhou, Guiyao; Xia, Changming; Liu, Jiantao; Tian, Hongchun; Liang, Wanting; Hou, Zhiyun

    2016-03-01

    We demonstrate the fabricating method for Yb3+-doped silica glass and double-cladding large mode area photonic crystal fiber (LMA PCF) based on laser sintering technology combined with a liquid phase doping method. The doped material prepared shows the amorphous property and the hydroxyl content is approximately 40 ppm. The attenuation of the fabricated LMA PCF is 14.2 dB m-1 at 976 nm, and the lowest value is 0.25 dB m-1 at 1200 nm. The laser slope efficiency is up to 70.2%.

  20. Refractive index sensing performance analysis of photonic crystal Mach-Zehnder interferometer based on BP neural network optimization

    NASA Astrophysics Data System (ADS)

    Chen, Ying; Liu, Teng; Wang, Wenyue; Zhu, Qiguang; Bi, Weihong

    2015-04-01

    According to the band gap and photon localization characteristics, the single-arm notching and the double-arm notching Mach-Zehnder interferometer (MZI) structures based on 2D triangular lattice air hole-typed photonic crystal waveguide are proposed. The back-propagation (BP) neural network is introduced to optimize the structural parameters of the photonic crystal MZI structure, which results in the normalized transmission peak increasing from 85.3% to 97.1%. The sensitivity performances of the two structures are compared and analyzed using the Salmonella solution samples with different concentrations in the numerical simulation. The results show that the sensitivity of the double-arm notching structure is 4583 nm/RIU, which is about 6.4 times of the single-arm notching structure, which can provide some references for the optimization of the photonic devices and the design of high-sensitivity biosensors.

  1. Direct fiber-coupled single photon source based on a photonic crystal waveguide

    SciTech Connect

    Ahn, Byeong-Hyeon Lee, Chang-Min; Lim, Hee-Jin; Schlereth, Thomas W.; Kamp, Martin; Höfling, Sven; Lee, Yong-Hee

    2015-08-24

    A single photon source plays a key role in quantum applications such as quantum computers and quantum communications. Epitaxially grown quantum dots are one of the promising platforms to implement a good single photon source. However, it is challenging to realize an efficient single photon source based on semiconductor materials due to their high refractive index. Here we demonstrate a direct fiber coupled single photon source with high collection efficiency by employing a photonic crystal (PhC) waveguide and a tapered micro-fiber. To confirm the single photon nature, the second-order correlation function g{sup (2)}(τ) is measured with a Hanbury Brown-Twiss setup. The measured g{sup (2)}(0) value is 0.15, and we can estimate 24% direct collection efficiency from a quantum dot to the fiber.

  2. Photon-dressed quasiparticle states in 1D and 2D materials: a many-body Floquet approach

    NASA Astrophysics Data System (ADS)

    Manghi, Franca; Puviani, Matteo

    We studiy the interplay between electron-electron interactions and non-equilibrium conditions associated to time-dependent external fields. Exploring phases of quantum matter away from equilibrium may give access to regimes inaccessible under equilibrium conditions. What makes this field particularly interesting is the possibility to engineer new phases of matter by an external tunable control. We have developed a scheme that allows to treat photo-induced phenomena in the presence of electron-electron many body interactions, where both the nonlinear effects of the external field and the electron-electron correlation are treated simultaneously and in a non-perturbative way. The Floquet approach is used to include the effects of the external time periodic field, and the Cluster Perturbation Theory to describe interacting electrons in a lattice. They are merged in a Floquet-Green function method that allows to calculate photon dressed quasiparticle excitation. For 1D systems we show that an unconventional Mott insulator-to-metal transition occurs for given characteristics of the applied field (intensity and frequency). The method has also been applied to the 2D honeycomb lattice (graphene), where in the presence of realistic values of electron-electron interaction, we show that linearly polarized light may give rise to non-dissipative edge states associated to a non-trivial topological behavior.

  3. Three-dimensional metallic photonic crystals with optical bandgaps.

    PubMed

    Vasilantonakis, Nikos; Terzaki, Konstantina; Sakellari, Ioanna; Purlys, Vytautas; Gray, David; Soukoulis, Costas M; Vamvakaki, Maria; Kafesaki, Maria; Farsari, Maria

    2012-02-21

    The fabrication of fully three-dimensional photonic crystals with a bandgap at optical wavelengths is demonstrated by way of direct femtosecond laser writing of an organic-inorganic hybrid material with metal-binding moieties, and selective silver coating using electroless plating. The crystals have 600-nm intralayer periodicity and sub-100 nm features, and they exhibit well-defined diffraction patterns. PMID:22278944

  4. Combined global 2D-local 3D modeling of the industrial Czochralski silicon crystal growth process

    NASA Astrophysics Data System (ADS)

    Jung, T.; Seebeck, J.; Friedrich, J.

    2013-04-01

    A global, axisymmetric thermal model of a Czochralski furnace is coupled to an external, local, 3D, time-dependent flow model of the melt via the inclusion of turbulent heat fluxes, extracted from the 3D melt model, into the 2D furnace model. Boundary conditions of the 3D model are updated using results from the 2D model. In the 3D model the boundary layers are resolved by aggressive mesh refinement towards the walls, and the Large Eddy Simulation approach is used to model the turbulent flow in the melt volume on a relatively coarse mesh to minimize calculation times. It is shown that by using this approach it is possible to reproduce fairly good results from Direct Numerical Simulations obtained on much finer meshes, as well as experimental results for interface shape and oxygen concentration in the case of growth of silicon crystals with 210 mm diameter for photovoltaics by the Czochralski method.

  5. Nonlinear regime of the mode-coupling instability in 2D plasma crystals

    NASA Astrophysics Data System (ADS)

    Röcker, T. B.; Couëdel, L.; Zhdanov, S. K.; Nosenko, V.; Ivlev, A. V.; Thomas, H. M.; Morfill, G. E.

    2014-05-01

    The transition between linear and nonlinear regimes of the mode-coupling instability (MCI) operating in a monolayer plasma crystal is studied. The mode coupling is triggered at the centre of the crystal and a melting front is formed, which travels through the crystal. At the nonlinear stage, the mode coupling results in synchronisation of the particle motion and the kinetic temperature of the particles grows exponentially. After melting of the crystalline structure, the mean kinetic energy of the particles continued to grow further, preventing recrystallisation of the melted phase. The anomalous kinetic temperature obtained in the experiments could not be reproduced in simulations employing a simple point-like wake model. This shows that at the nonlinear stage of the MCI a more careful analysis is necessary.

  6. Transport properties of high quality heterostructures from unstable 2D crystals prepared in inert atmosphere

    NASA Astrophysics Data System (ADS)

    Yu, Geliang; Yang, Cao; Khestanova, Ekaterina; Mishchenko, Artem; Kretinin, Andy; Gorbachev, Roman; Novoselov, Konstantin; Andre, Geim; Manchester Group Team

    Many layered materials can be cleaved down to individual atomic planes, similar to graphene, but only a small minority of them are stable under ambient conditions. The rest reacts and decomposes in air, which has severely hindered their investigation and possible uses. Here we introduce a remedial approach based on cleavage, transfer, alignment and encapsulation of airsensitive crystals, all inside a controlled inert atmosphere. To illustrate the technology, we choose two archetypal two-dimensional crystals unstable in air: black phosphorus and niobium diselenide. Our field-effect devices made from their monolayers are conductive and fully stable under ambient conditions, in contrast to the counterparts processed in air. NbSe2 remains superconducting down to the monolayer thickness. Starting with a trilayer, phosphorene devices reach sufficiently high mobilities to exhibit Landau quantization. The approach offers a venue to significantly expand the range of experimentally accessible two-dimensional crystals and their heterostructures.

  7. Improving image quality and stability of two-dimensional photonic crystal slab by changing surface structure of the photonic crystal

    NASA Astrophysics Data System (ADS)

    Zhu, Zhao-Jie; Liu, Peng-Fang; Tong, Yuan-Wei

    2016-03-01

    The propagation of electromagnetic (EM) waves in two-dimensional hexagon-lattice photonic crystals (PCs) is investigated through dispersion characteristics analysis and numerical simulation of field pattern. The full width at half maximum (FWHM) of the image reach 0.37λ which is much smaller than 0.5λ by changing surface structure of the photonic crystal, and the variance of FWHM of image focused by the changed slab seems to be less than the variance of FWHM of image focused by the original slab with the changing of source position.

  8. Direct MD Simulations of Terahertz Absorption and 2D Spectroscopy Applied to Explosive Crystals.

    PubMed

    Katz, G; Zybin, S; Goddard, W A; Zeiri, Y; Kosloff, R

    2014-03-01

    A direct molecular dynamics simulation of the THz spectrum of a molecular crystal is presented. A time-dependent electric field is added to a molecular dynamics simulation of a crystal slab. The absorption spectrum is composed from the energy dissipated calculated from a series of applied pulses characterized by a carrier frequency. The spectrum of crystalline cyclotrimethylenetrinitramine (RDX) and triacetone triperoxide (TATP) were simulated with the ReaxFF force field. The proposed direct method avoids the linear response and harmonic approximations. A multidimensional extension of the spectroscopy is suggested and simulated based on the nonlinear response to a single polarized pulse of radiation in the perpendicular polarization direction. PMID:26274066

  9. Dual concentric crystal low energy photon detector

    DOEpatents

    Guilmette, R.A.

    A photon detector for biological samples includes a block of NaI(T1) having a hole containing a thin walled cylinder of CsI(T1). At least three photo multiplier tubes are evenly spaced around the parameter of the block. Biological samples are placed within the hole, and emissions which are sensed by at least two of the photo multipliers from only the NaI(T1) detector are counted.

  10. Photonic crystal with left-handed components

    NASA Astrophysics Data System (ADS)

    Markoš, Peter

    2016-02-01

    We show that the periodic array of left-handed cylinders possesses a rich spectrum of guided modes when the negative permeability of cylinders equals exactly to minus value of permeability of embedding media. These resonances strongly influence propagation of electromagnetic waves through photonic structures made from left-handed materials. A series of Fano resonances excited by incident wave destroys the band frequency spectrum of square array of left-handed cylinders and increases considerably the absorption of transmitted waves.

  11. Tunable photonic structures based on silicon and liquid crystals

    NASA Astrophysics Data System (ADS)

    Perova, Tatiana S.; Tolmachev, Vladimir A.; Astrova, Ekaterina V.

    2008-01-01

    This paper is focused on the design, fabrication and characterization of the conventional and tunable photonic devices based on grooved silicon, serving as one-dimensional (1D) photonic crystal. The advantages of these photonic structures are as follows: the large refractive index contrast, in-plane moulding of the light flow, the possibility to fabricate a composite photonic structures by filling the grooves with a different compounds and compatibility with current semiconductor processing techniques. The optical properties of grooved Si structures were simulated using a transfer matrix method and gap map method and have been verified experimentally using FTIR microscopy. The air spaces in the basic silicon-air matrices were infiltrated with nematic liquid crystal E7. It is shown that the optical properties of the obtained composite 1D photonic crystals can be tuned by means of electro- and thermo-optical effects. Such a structures suit well for the various elements of the integrated optics and can serve as a building blocks for optical interconnects.

  12. Silicon photonic crystal thermal emitter at near-infrared wavelengths

    PubMed Central

    O’Regan, Bryan J.; Wang, Yue; Krauss, Thomas F.

    2015-01-01

    Controlling thermal emission with resonant photonic nanostructures has recently attracted much attention. Most of the work has concentrated on the mid-infrared wavelength range and/or was based on metallic nanostructures. Here, we demonstrate the experimental operation of a resonant thermal emitter operating in the near-infrared (≈1.5 μm) wavelength range. The emitter is based on a doped silicon photonic crystal consisting of a two dimensional square array of holes and using silicon-on-insulator technology with a device-layer thickness of 220 nm. The device is resistively heated by passing current through the photonic crystal membrane. At a temperature of ≈1100 K, we observe relatively sharp emission peaks with a Q factor around 18. A support structure system is implemented in order to achieve a large area suspended photonic crystal thermal emitter and electrical injection. The device demonstrates that weak absorption together with photonic resonances can be used as a wavelength-selection mechanism for thermal emitters, both for the enhancement and the suppression of emission. PMID:26293111

  13. Silicon photonic crystal thermal emitter at near-infrared wavelengths.

    PubMed

    O'Regan, Bryan J; Wang, Yue; Krauss, Thomas F

    2015-01-01

    Controlling thermal emission with resonant photonic nanostructures has recently attracted much attention. Most of the work has concentrated on the mid-infrared wavelength range and/or was based on metallic nanostructures. Here, we demonstrate the experimental operation of a resonant thermal emitter operating in the near-infrared (≈1.5 μm) wavelength range. The emitter is based on a doped silicon photonic crystal consisting of a two dimensional square array of holes and using silicon-on-insulator technology with a device-layer thickness of 220 nm. The device is resistively heated by passing current through the photonic crystal membrane. At a temperature of ≈1100 K, we observe relatively sharp emission peaks with a Q factor around 18. A support structure system is implemented in order to achieve a large area suspended photonic crystal thermal emitter and electrical injection. The device demonstrates that weak absorption together with photonic resonances can be used as a wavelength-selection mechanism for thermal emitters, both for the enhancement and the suppression of emission. PMID:26293111

  14. Analysis of tunable photonic band structure in an extrinsic plasma photonic crystal

    NASA Astrophysics Data System (ADS)

    King, Tzu-Chyang; Yang, Chih-Chiang; Hsieh, Pei-Hung; Chang, Tsung-Wen; Wu, Chien-Jang

    2015-03-01

    In this work, we theoretically investigate the tunable photonic band structure (PBS) for an extrinsic plasma photonic crystal (PPC). The extrinsic PPC is made of a bulk cold plasma layer which is influenced by an externally periodic static magnetic field. The PBS can be tuned by the variation of the magnitude of externally applied magnetic field. In addition, we also show that the PBS can be changed as a function of the electron density as well as the thickness variation.

  15. Multicolor fluorescence enhancement from a photonics crystal surface

    PubMed Central

    Pokhriyal, A.; Lu, M.; Huang, C. S.; Schulz, S.; Cunningham, B. T.

    2010-01-01

    A photonic crystal substrate exhibiting resonant enhancement of multiple fluorophores has been demonstrated. The device, fabricated uniformly from plastic materials over a ∼3×5 in.2 surface area by nanoreplica molding, utilizes two distinct resonant modes to enhance electric field stimulation of a dye excited by a λ=632.8 nm laser (cyanine-5) and a dye excited by a λ=532 nm laser (cyanine-3). Resonant coupling of the laser excitation to the photonic crystal surface is obtained for each wavelength at a distinct incident angle. Compared to detection of a dye-labeled protein on an ordinary glass surface, the photonic crystal surface exhibited a 32× increase in fluorescent signal intensity for cyanine-5 conjugated streptavidin labeling, while a 25× increase was obtained for cyanine-3 conjugated streptavidin labeling. The photonic crystal is capable of amplifying the output of any fluorescent dye with an excitation wavelength in the 532 nm<λ<633 nm range by selection of an appropriate incident angle. The device is designed for biological assays that utilize multiple fluorescent dyes within a single imaged area, such as gene expression microarrays. PMID:20957067

  16. Multicolor fluorescence enhancement from a photonics crystal surface

    NASA Astrophysics Data System (ADS)

    Pokhriyal, A.; Lu, M.; Huang, C. S.; Schulz, S.; Cunningham, B. T.

    2010-09-01

    A photonic crystal substrate exhibiting resonant enhancement of multiple fluorophores has been demonstrated. The device, fabricated uniformly from plastic materials over a ˜3×5 in.2 surface area by nanoreplica molding, utilizes two distinct resonant modes to enhance electric field stimulation of a dye excited by a λ =632.8 nm laser (cyanine-5) and a dye excited by a λ =532 nm laser (cyanine-3). Resonant coupling of the laser excitation to the photonic crystal surface is obtained for each wavelength at a distinct incident angle. Compared to detection of a dye-labeled protein on an ordinary glass surface, the photonic crystal surface exhibited a 32× increase in fluorescent signal intensity for cyanine-5 conjugated streptavidin labeling, while a 25× increase was obtained for cyanine-3 conjugated streptavidin labeling. The photonic crystal is capable of amplifying the output of any fluorescent dye with an excitation wavelength in the 532 nm<λ<633 nm range by selection of an appropriate incident angle. The device is designed for biological assays that utilize multiple fluorescent dyes within a single imaged area, such as gene expression microarrays.

  17. Hollow core photonic crystal fiber based viscometer with Raman spectroscopy.

    PubMed

    Horan, L E; Ruth, A A; Gunning, F C Garcia

    2012-12-14

    The velocity of a liquid flowing through the core of a hollow core photonic crystal fiber (driven by capillary forces) is used for the determination of a liquid's viscosity, using volumes of less than 10 nl. The simple optical technique used is based on the change in propagation characteristics of the fiber as it fills with the liquid of interest via capillary action, monitored by a laser source. Furthermore, the liquid filled hollow core photonic crystal fiber is then used as a vessel to collect Raman scattering from the sample to determine the molecular fingerprint of the liquid under study. This approach has a wide variety of indicative uses in cases where nano-liter samples are necessary. We use 10-12 cm lengths of hollow core photonic crystal fibers to determine the viscosity and Raman spectra of small volumes of two types of monosaccharides diluted in a phosphate buffer solution to demonstrate the principle. The observed Raman signal is strongest when only the core of the hollow core photonic crystal fiber is filled, and gradually decays as the rest of the fiber fills with the sample. PMID:23249014

  18. Vector–vortex solitons in nonlinear photonic crystal fibers

    NASA Astrophysics Data System (ADS)

    Salgueiro, José R.

    2016-07-01

    In this article, I study a system of two incoherently coupled components in a nonlinear Kerr-type photonic crystal fiber presenting angular momentum in one or both components. I classify the different families of solutions and study their bifurcations in the power dispersion diagram. Finally, I analyze the stability of the different nonlinear modes by means of numerical simulations.

  19. Design and modeling of a photonic crystal fiber gas sensor.

    PubMed

    Hoo, Yeuk L; Jin, Wei; Shi, Chunzheng; Ho, Hoi L; Wang, Dong N; Ruan, Shuang C

    2003-06-20

    We report the modeling results of an all-fiber gas detector that uses photonic crystal fiber (PCF). The relative sensitivity of the PCF as a function of the fiber parameters is calculated. Gas-diffusion dynamics that affect the sensor response time is investigated theoretically and experimentally. A practical PCF sensor aiming for high sensitivity gas detection is proposed. PMID:12833952

  20. [INVITED] New perspectives in photonic crystal fibre sensors

    NASA Astrophysics Data System (ADS)

    Villatoro, Joel; Zubia, Joseba

    2016-04-01

    In this paper we analyse the recent advances on sensors based on photonic crystal fibres(PCFs) and discuss their advantages and disadvantages. Some innovative approaches to overcome the main limitations of PCF sensors are also analysed. In addition, we discuss some opportunities and challenges in PCF sensing for the coming years.

  1. Three dimensional reflectance properties of plasma dielectric photonic crystal

    NASA Astrophysics Data System (ADS)

    Pandey, G. N.; Pandey, J. P.; Mishra, A. K.; Ojha, S. P.

    2016-05-01

    In this present communication, we study the three dimentionalomni-directional reflection bands in Plasma Photonic Crystals (PPC), having alternate regions of plasma-dielectric. We have calculated the reflectivity of the proposed structure at the various angles of incidence for both polarizations (TE - & TM) in three dimensions.

  2. Reflection properties of one dimensional plasma photonic crystal

    NASA Astrophysics Data System (ADS)

    Kumar, Arun; Khundrakpam, Pinky; Sharma, Priyanka

    2013-06-01

    In this paper band structure and reflection properties of on one-dimensional plasma photonic crystal (PPC) containing alternate layers of dielectric and micro-plasma have been presented. For the purpose of computation, transfer matrix method has been used. It is found that width of the forbidden band gap(s) can be increased by increasing the thickness of plasma layers.

  3. Hollow core photonic crystal fiber based viscometer with Raman spectroscopy

    NASA Astrophysics Data System (ADS)

    Horan, L. E.; Ruth, A. A.; Garcia Gunning, F. C.

    2012-12-01

    The velocity of a liquid flowing through the core of a hollow core photonic crystal fiber (driven by capillary forces) is used for the determination of a liquid's viscosity, using volumes of less than 10 nl. The simple optical technique used is based on the change in propagation characteristics of the fiber as it fills with the liquid of interest via capillary action, monitored by a laser source. Furthermore, the liquid filled hollow core photonic crystal fiber is then used as a vessel to collect Raman scattering from the sample to determine the molecular fingerprint of the liquid under study. This approach has a wide variety of indicative uses in cases where nano-liter samples are necessary. We use 10-12 cm lengths of hollow core photonic crystal fibers to determine the viscosity and Raman spectra of small volumes of two types of monosaccharides diluted in a phosphate buffer solution to demonstrate the principle. The observed Raman signal is strongest when only the core of the hollow core photonic crystal fiber is filled, and gradually decays as the rest of the fiber fills with the sample.

  4. Transverse magnetic field impact on waveguide modes of photonic crystals.

    PubMed

    Sylgacheva, Daria; Khokhlov, Nikolai; Kalish, Andrey; Dagesyan, Sarkis; Prokopov, Anatoly; Shaposhnikov, Alexandr; Berzhansky, Vladimir; Nur-E-Alam, Mohammad; Vasiliev, Mikhail; Alameh, Kamal; Belotelov, Vladimir

    2016-08-15

    This Letter presents a theoretical and experimental study of waveguide modes of one-dimensional magneto-photonic crystals magnetized in the in-plane direction. It is shown that the propagation constants of the TM waveguide modes are sensitive to the transverse magnetization and the spectrum of the transverse magneto-optical Kerr effect has resonant features at mode excitation frequencies. Two types of structures are considered: a non-magnetic photonic crystal with an additional magnetic layer on top and a magneto-photonic crystal with a magnetic layer within each period. We found that the magneto-optical non-reciprocity effect is greater in the first case: it has a magnitude of δ∼10-4, while the second structure type demonstrates δ∼10-5 only, due to the higher asymmetry of the claddings of the magnetic layer. Experimental observations show resonant features in the optical and magneto-optical Kerr effect spectra. The measured dispersion properties are in good agreement with the theoretical predictions. An amplitude of light intensity modulation of up to 2.5% was observed for waveguide mode excitation within the magnetic top layer of the non-magnetic photonic crystal structure. The presented theoretical approach may be utilized for the design of magneto-optical sensors and modulators requiring pre-determined spectral features. PMID:27519096

  5. Ultrafast optics in dispersion-flattened photonic crystal fiber

    SciTech Connect

    Reeves, W. H.; Knight, J. C.; Russell, P. S. J.; Skryabin, D. V.; Omenetto, F. G.; Efimov, A. V.; Taylor, Antoinette J.,

    2002-01-01

    llOfs pulses at 1550nm wavelength were launched in to various ultra flattened dispersion photonic crystal fibers. For output powers of around 100mW spectral components were generated in a range greater than 350-22OOnm.

  6. Ultraflat supercontinuum generation in soft-glass photonic crystal fibers

    NASA Astrophysics Data System (ADS)

    Miret, J. J.; Silvestre, E.; Andrés, P.

    2009-05-01

    We recognize some photonic-crystal-fiber structures, made up of soft glass, that generate ultrawide (over an octave), very smooth and highly coherent supercontinuum spectrum when illuminated with femtosecond pulsed light around 1.55 μm. The design of soft-glass microstructured fiber geometry with nearly ultraflattened, positive and low dispersion is crucial to accomplish the above goals.

  7. Thermal properties photonic crystal fiber transducers with ferromagnetic nanoparticles

    NASA Astrophysics Data System (ADS)

    Przybysz, N.; Marć, P.; Kisielewska, A.; Jaroszewicz, L. R.

    2015-12-01

    The main aim of the research is to design new types of fiber optic transducers based on filled photonic crystal fibers for sensor applications. In our research we propose to use as a filling material nanoparticles' ferrofluids (Fe3O4 NPs). Optical properties of such transducers are studied by measurements of spectral characteristics' changes when transducers are exposed to temperature and magnetic field changes. From synthesized ferrofluid several mixtures with different NPs' concentrations were prepared. Partially filled commercially available photonic crystal fiber LMA 10 (NKT Photonics) was used to design PCF transducers. Their thermo-optic properties were tested in a temperature chamber. Taking into account magnetic properties of synthetized NPs the patch cords based on a partially filled PM 1550 PCF were measured.

  8. Photonic crystal surface-emitting lasers enabled by an accidental Dirac point

    SciTech Connect

    Chua, Song Liang; Lu, Ling; Soljacic, Marin

    2014-12-02

    A photonic-crystal surface-emitting laser (PCSEL) includes a gain medium electromagnetically coupled to a photonic crystal whose energy band structure exhibits a Dirac cone of linear dispersion at the center of the photonic crystal's Brillouin zone. This Dirac cone's vertex is called a Dirac point; because it is at the Brillouin zone center, it is called an accidental Dirac point. Tuning the photonic crystal's band structure (e.g., by changing the photonic crystal's dimensions or refractive index) to exhibit an accidental Dirac point increases the photonic crystal's mode spacing by orders of magnitudes and reduces or eliminates the photonic crystal's distributed in-plane feedback. Thus, the photonic crystal can act as a resonator that supports single-mode output from the PCSEL over a larger area than is possible with conventional PCSELs, which have quadratic band edge dispersion. Because output power generally scales with output area, this increase in output area results in higher possible output powers.

  9. Light trapping in thin film solar cells using textured photonic crystal

    DOEpatents

    Yi, Yasha; Kimerling, Lionel C.; Duan, Xiaoman; Zeng, Lirong

    2009-01-27

    A solar cell includes a photoactive region that receives light. A photonic crystal is coupled to the photoactive region, wherein the photonic crystal comprises a distributed Bragg reflector (DBR) for trapping the light.

  10. Ultra-refractive and extended-range one-dimensional photonic crystal superprisms

    NASA Technical Reports Server (NTRS)

    Ting, D. Z. Y.

    2003-01-01

    We describe theoretical analysis and design of one-dimensional photonic crystal prisms. We found that inside the photonic crystal, for frequencies near the band edges, light propagation direction is extremely sensitive to the variations in wavelength and incident angle.

  11. Enhanced trion emission from colloidal quantum dots with photonic crystals by two-photon excitation.

    PubMed

    Xu, Xingsheng

    2013-01-01

    For colloidal quantum dots, the ongoing biggest problem is their fluorescence blinking. Until now, there is no generally accepted model for this fluorescence blinking. Here, two-photon excited fluorescence from CdSe/ZnS nanocrystals on silicon nitride photonic crystals is studied using a femtosecond laser. From analysis of the spectra and decay processes, most of the relative trion efficiency is larger than 10%, and the largest relative trion efficiency reaches 46.7%. The photonic crystals enhance the trion emission of CdSe/ZnS nanocrystals, where the enhancement is due to the coupling of the trion emission to the leaky mode of the photonic crystal slab. Moreover, the photonic crystals enhance the Auger-assisted trapping efficiency of electrons/holes to surface states, and then enhance the efficiency of the generations of charge separation and DC electric field, which modifies the trion spectrum. Therefore, a model is present for explaining the mechanism of fluorescence blinking including the effect of the environment. PMID:24231669

  12. Modeling and analysis of the temperature sensitivity in two-dimensional photonic crystal microcavity

    NASA Astrophysics Data System (ADS)

    Hocini, Abdesselam; Harhouz, Ahlam

    2016-01-01

    We propose a temperature sensor design based on the two-dimensional (2-D) photonic crystals (PhCs) microcavity coupled to two waveguides. We consider a Si 2-D PhC, and the refractive index (RI) of distilled water in holes has been taken as temperature dependent. The resonant wavelength will shift when temperature variation induces change in the RIs of the distilled water. The temperature variation causes the shifting of defect modes. The transmission characteristics of light in the sensor under different RIs that correspond to the change in temperatures are simulated by using the finite-difference time-domain method. A sensitivity of 84 pm/°C was achieved with the structure proposed. This property can be exploited in the design of a temperature sensor.

  13. Modeling photonic crystals by boundary integral equations and Dirichlet-to-Neumann maps

    SciTech Connect

    Yuan Jianhua; Lu Yayan Antoine, Xavier

    2008-04-20

    Efficient numerical methods for analyzing photonic crystals (PhCs) can be developed using the Dirichlet-to-Neumann (DtN) maps of the unit cells. The DtN map is an operator that takes the wave field on the boundary of a unit cell to its normal derivative. In frequency domain calculations for band structures and transmission spectra of finite PhCs, the DtN maps allow us to reduce the computation to the boundaries of the unit cells. For two-dimensional (2D) PhCs with unit cells containing circular cylinders, the DtN maps can be constructed from analytic solutions (the cylindrical waves). In this paper, we develop a boundary integral equation method for computing DtN maps of general unit cells containing cylinders with arbitrary cross sections. The DtN map method is used to analyze band structures for 2D PhCs with elliptic and other cylinders.

  14. A proposal for optical WDM using embedded photonic crystal ring resonator with distributed coupling

    NASA Astrophysics Data System (ADS)

    Almasian, Mohammad Reza; Abedi, Kambiz

    2016-05-01

    In this paper, an ultra-narrow band channel drop filter (CDF) based on embedded photonic crystal ring resonator with distributed coupling for optical wavelength division multiplexing is proposed and designed in which silicon rods arranged as square lattice. For this purpose, the influences of variation of the central ring radius, on the operating wavelength have been investigated. Calculation results show that the efficiency of 88% with quality factor of 5740, 98% with quality factor of 4889 and 98% with quality factor of 4798 at operating wavelength of 1550 nm can be achieved. Consequently the channel band width and channel spacing are reduced to 270 pm and 600 pm respectively, which will be suitable for dense wavelength division multiplexing (DWDM) optical network systems with 600 pm channel spacing. Simulations have been performed using 2-D finite difference time-domain (2D FDTD) calculations.

  15. Topology optimized mode conversion in a photonic crystal waveguide fabricated in silicon-on-insulator material.

    PubMed

    Frandsen, Lars H; Elesin, Yuriy; Frellsen, Louise F; Mitrovic, Miranda; Ding, Yunhong; Sigmund, Ole; Yvind, Kresten

    2014-04-01

    We have designed and for the first time experimentally verified a topology optimized mode converter with a footprint of ~6.3 μm × ~3.6 μm which converts the fundamental even mode to the higher order odd mode of a dispersion engineered photonic crystal waveguide. 2D and 3D topology optimization is utilized and both schemes result in designs theoretically showing an extinction ratio larger than 21 dB. The 3D optimized design has an experimentally estimated insertion loss lower than ~2 dB in an ~43 nm bandwidth. The mode conversion is experimentally confirmed in this wavelength range by recording mode profiles using vertical grating couplers and an infrared camera. The experimentally determined extinction ratio is > 12 dB and is believed to be limited by the spatial resolution of our setup. PMID:24718224

  16. A high quality factor photonic crystal channel-drop filter with a linear gradient microcavity

    NASA Astrophysics Data System (ADS)

    Li, Chuan-qi; Fan, Qing-bin; Lu, Ye; Luo, De-jun; Kong, Yi-bu; Zhang, Dong-chuang

    2015-05-01

    We design a channel-drop filter (CDF) with a linear gradient microcavity in a two-dimensional (2D) photonic crystal (PC). The model of three-port CDF with reflector is used to achieve high quality factor (Q-factor) and 100% channel-drop efficiency. The research indicates that adjusting the distance between reference plane and reflector can simultaneously influence the Q-factor due to coupling to a bus waveguide and the phase retardation occurring in the round trip between a microcavity and a reflector. The calculation results of 2D finite-difference time-domain (FDTD) method show that the designed filter can achieve the drop efficiency of 96.7% and ultra-high Q-factor with an ultra-small modal volume.

  17. Enhancing extraction efficiency of mid-infrared fluorescence in chalcogenide glass via photonic crystal

    NASA Astrophysics Data System (ADS)

    Zhang, Jun; Zhang, Peiqing; Ma, Beijiao; Dai, Shixun; Zhang, Wei; Nie, Qiuhua

    2016-04-01

    The use of rare earth-doped chalcogenide glass is an attractive method to develop mid-infrared sources. In this work, Er3+-doped chalcogenide glass is prepared, and photonic crystal (PC) pattern is designed to improve the extraction efficiency of light emission from the sample surface. The finite difference time domain simulation shows that the light extraction efficiency from the sample surface can be 1.62 times stronger than that from the sample without PC structure by introducing a simple two-dimensional (2D) PC structure into glass samples. This improvement was the result of the efficient light diffraction on the surface because of the integrated 2D PC. Results in this work offer a potential in developing midinfrared light sources.

  18. Nano-photonic organic solar cell architecture for advanced light management utilizing dual photonic crystals

    NASA Astrophysics Data System (ADS)

    Peer, Akshit; Biswas, Rana

    2015-09-01

    Organic solar cells have rapidly increasing efficiencies, but typically absorb less than half of the incident solar spectrum. To increase broadband light absorption, we rigorously design experimentally realizable solar cell architectures based on dual photonic crystals. Our optimized architecture consists of a polymer microlens at the air-glass interface, coupled with a photonic-plasmonic crystal at the metal cathode. The microlens focuses light on the periodic nanostructure that generates strong light diffraction. Waveguiding modes and surface plasmon modes together enhance long wavelength absorption in P3HT-PCBM. The architecture has a period of 500 nm, with absorption and photocurrent enhancement of 49% and 58%, respectively.

  19. Pores of the toxin FraC assemble into 2D hexagonal clusters in both crystal structures and model membranes.

    PubMed

    Mechaly, Ariel E; Bellomio, Augusto; Morante, Koldo; Agirre, Jon; Gil-Cartón, David; Valle, Mikel; González-Mañas, Juan Manuel; Guérin, Diego M A

    2012-11-01

    The recent high-resolution structure of the toxin FraC derived from the sea anemone Actinia fragacea has provided new insight into the mechanism of pore formation by actinoporins. In this work, we report two new crystal forms of FraC in its oligomeric prepore conformation. Together with the previously reported structure, these two new structures reveal that ring-like nonamers of the toxin assemble into compact two-dimensional hexagonal arrays. This supramolecular organization is maintained in different relative orientations adopted by the oligomers within the crystal layers. Analyses of the aggregation of FraC pores in both planar and curved (vesicles) model membranes show similar 2D hexagonal arrangements. Our observations support a model in which hexagonal pore-packing is a clustering mechanism that maximizes toxin-driven membrane damage in the target cell. PMID:22728830

  20. Two-dimensional crystal melting and D4-D2-D0 on toric Calabi-Yau singularities

    NASA Astrophysics Data System (ADS)

    Nishinaka, Takahiro; Yamaguchi, Satoshi; Yoshida, Yutaka

    2014-05-01

    We construct a two-dimensional crystal melting model which reproduces the BPS index of D2-D0 states bound to a non-compact D4-brane on an arbitrary toric CalabiYau singularity. The crystalline structure depends on the toric divisor wrapped by the D4-brane. The molten crystals are in one-to-one correspondence with the torus fixed points of the moduli space of the quiver gauge theory on D-branes. The F- and D-term constraints of the gauge theory are regarded as a generalization of the ADHM constraints on instantons. We also show in several examples that our model is consistent with the wall-crossing formula for the BPS index.

  1. Invited Review Article: Development of crystal lenses for energetic photons

    SciTech Connect

    Smither, Robert K.

    2014-08-15

    This paper follows the development of crystal diffraction lenses designed to focus energetic photons. It begins with the search for a solution to the astrophysics problem of how to detect weak astrophysics sources of gamma rays and x-rays. This led to the basic designs for a lens and to the understanding of basic limitations of lens design. The discussion of the development of crystal diffraction lenses is divided into two parts: lenses using crystals with mosaic structure, and lenses that use crystals with curved crystal planes. This second group divides into two sub-groups: (1) Curved crystals that are used to increase the acceptance angle of the diffraction of a monochromatic beam and to increase the energy bandwidth of the diffraction. (2) Curved crystals used to focus gamma ray beams. The paper describes how these two types of crystals affect the design of the corresponding crystal lenses in different fields: astrophysics, medical imaging, detection of weak, distant, gamma-ray sources, etc. The designs of crystal lenses for these applications are given in enough detail to allow the reader to design a lens for his own application.

  2. Photon irradiation response of photonic crystal fibres and flat fibres at radiation therapy doses.

    PubMed

    Hashim, S; Ibrahim, S A; Che Omar, S S; Alajerami, Y S M; Saripan, M I; Noor, N M; Ung, N M; Mahdiraji, G A; Bradley, D A; Alzimami, K

    2014-08-01

    Radiation effects of photon irradiation in pure Photonic Crystal Fibres (PCF) and Flat fibres (FF) are still much less investigated in thermoluminescense dosimetry (TLD). We have reported the TL response of PCF and FF subjected to 6 MV photon irradiation. The proposed dosimeter shows good linearity at doses ranging from 1 to 4 Gy. The small size of these detectors points to its use as a dosimeter at megavoltage energies, where better tissue-equivalence and the Bragg-Gray cavity theory prevails. PMID:24858954

  3. Plasmonic photonic crystals realized through DNA-programmable assembly

    PubMed Central

    Park, Daniel J.; Zhang, Chuan; Ku, Jessie C.; Zhou, Yu; Schatz, George C.; Mirkin, Chad A.

    2015-01-01

    Three-dimensional dielectric photonic crystals have well-established enhanced light–matter interactions via high Q factors. Their plasmonic counterparts based on arrays of nanoparticles, however, have not been experimentally well explored owing to a lack of available synthetic routes for preparing them. However, such structures should facilitate these interactions based on the small mode volumes associated with plasmonic polarization. Herein we report strong light-plasmon interactions within 3D plasmonic photonic crystals that have lattice constants and nanoparticle diameters that can be independently controlled in the deep subwavelength size regime by using a DNA-programmable assembly technique. The strong coupling within such crystals is probed with backscattering spectra, and the mode splitting (0.10 and 0.24 eV) is defined based on dispersion diagrams. Numerical simulations predict that the crystal photonic modes (Fabry–Perot modes) can be enhanced by coating the crystals with a silver layer, achieving moderate Q factors (∼102) over the visible and near-infrared spectrum. PMID:25548175

  4. Streptavidin 2D crystal substrates for visualizing biomolecular processes by atomic force microscopy.

    PubMed

    Yamamoto, Daisuke; Nagura, Naoki; Omote, Saeko; Taniguchi, Masaaki; Ando, Toshio

    2009-10-21

    Flat substrate surfaces are a key to successful imaging of biological macromolecules by atomic force microscopy (AFM). Although usable substrate surfaces have been prepared for still imaging of immobilized molecules, surfaces that are more suitable have recently been required for dynamic imaging to accompany the progress of the scan speed of AFM. In fact, the state-of-the-art high-speed AFM has achieved temporal resolution of 30 ms, a capacity allowing us to trace molecular processes played by biological macromolecules. Here, we characterize three types of streptavidin two-dimensional crystals as substrates, concerning their qualities of surface roughness, uniformity, stability, and resistance to nonspecific protein adsorption. These crystal surfaces are commonly resistant to nonspecific protein adsorption, but exhibit differences in other properties to some extent. These differences must be taken into consideration, but these crystal surfaces are still useful for dynamic AFM imaging, as demonstrated by observation of calcium-induced changes in calmodulin, GroES binding to GroEL, and actin polymerization on the surfaces. PMID:19843468

  5. 2D x-ray imaging spectroscopic diagnostics using convex bent crystal

    NASA Astrophysics Data System (ADS)

    Papp, Daniel; Presura, Radu; Wallace, Matt; Largent, Billy; Haque, Showera; Arias, Angel; Khanal, Vijay; Ivanov, Vladimir

    2013-10-01

    A new 2-dimensional time-integrated x-ray spectroscopic diagnostics technique was developed to create multi-monochromatic images of high-energy density Al plasmas. 2-dimensional is an advanced spectroscopic tool, providing a way to determine the spatial dependence of plasma temperature and density (Te and ne) in hot plasmas. The new technique uses the strong source broadening of convex cylindrically bent KAP crystal spectrometers, which contains spatial information along the dispersive direction. The perpendicular direction is imaged using a slit. The spatial resolution of the method is improved by the deconvolution of the source broadened line profiles from the lineshapes (recorded by the convex crystal spectrometer) with lineshapes of minimum instrumental broadening. The latter spectra were recorded with a concave cylindrically bent KAP crystal spectrometer, based on the Johann geometry. Spectroscopic model of the plasma x-ray emission was developed using the PrismSPECT code. The identification of suitable spectral features allows deriving Te and ne from line intensities. We applied this model to get temperature and density distribution maps for wire array z-pinch plasmas. Work supported by the DOE/NNSA under grant DE-NA0001834 and Cooperative Agreement DE-FC52-06NA27616.

  6. Free-Standing Photonic Crystal Films with Gradient Structural Colors.

    PubMed

    Ding, Haibo; Liu, Cihui; Ye, Baofen; Fu, Fanfan; Wang, Huan; Zhao, Yuanjin; Gu, Zhongze

    2016-03-23

    Hydrogel colloidal crystal composite materials have a demonstrated value in responsive photonic crystals (PhCs) via controllable stimuli. Although they have been successfully exploited to generate a gradient of color distribution, the soft hydrogels have limitations in terms of stability and storage caused by dependence on environment. Here, we present a practical strategy to fabricate free-standing PhC films with a stable gradient of structural colors using binary polymer networks. A colloidal crystal hydrogel film was prepared for this purpose, with continuously varying photonic band gaps corresponding to the gradient of the press. Then, a second polymer network was used to lock the inside non-close-packed PhC structures and color distribution of the hydrogel film. It was demonstrated that our strategy could bring about a solution to the angle-dependent structural colors of the PhC films by coating the surface with special microstructures. PMID:26962967

  7. Realization of optical XOR and OR gates using asymmetric Y-structure in a two dimensional photonic crystal

    NASA Astrophysics Data System (ADS)

    Rath, Smruti; Dash, Sonali P.; Hota, Mihir; Tripathy, Sukanta K.

    2012-07-01

    We propose an asymmetric Y-structure in a 2D photonic crystal consisting of TiO2 rods in air. The structure is then optimized by taking out the rods so as to create defects at different points, to realize optical XOR and OR operations. To verify our proposition, we use FDTD method to simulate the wave propagation inside the proposed asymmetric waveguide. Simulation results showed that, the said optimized design can really act as optical OR and XOR gate.

  8. Density of photonic states in cholesteric liquid crystals

    NASA Astrophysics Data System (ADS)

    Dolganov, P. V.

    2015-04-01

    Density of photonic states ρ (ω ) , group vg, and phase vph velocity of light, and the dispersion relation between wave vector k , and frequency ω (k ) were determined in a cholesteric photonic crystal. A highly sensitive method (measurement of rotation of the plane of polarization of light) was used to determine ρ (ω ) in samples of different quality. In high-quality samples a drastic increase in ρ (ω ) near the boundaries of the stop band and oscillations related to Pendellösung beatings are observed. In low-quality samples photonic properties are strongly modified. The maximal value of ρ (ω ) is substantially smaller, and density of photonic states increases near the selective reflection band without oscillations in ρ (ω ) . Peculiarities of ρ (ω ) , vg, and ω (k ) are discussed. Comparison of the experimental results with theory was performed.

  9. Integrated photonic devices using self-assembled and optically defined photonic crystal superstructures

    NASA Astrophysics Data System (ADS)

    Wang, Ying

    Photonic crystals are structures with dielectric constants modulated in one, two, or three dimensions. They are an interesting subject of active research due to their ability to control the flow of light on a very small-length scale. In the research for this thesis, two integrated photonic devices were designed, fabricated and characterized which utilize the special optical properties of photonic crystals. The first device is a photonic crystal-photodiode micro-electro-optic filter, where a vertical self-assembly method was employed to grow a 3D face-centered cubic (FCC) photonic crystal over a working electro-optic device, a photodiode and a photodiode-plus-preamplifier made using conventional CMOS techniques. The objective of this project was to judge the practicality of the process and to observe the effect of the photonic crystal on the spectral response of the photodiode and photodiode-amplifier. Spectral measurements taken using a grating monochrometer confirmed that a stop band exists in the photocurrent response of this integrated photonic device, photonic crystal photodiode filter, at the predicted wavelength of 600 nm. These results were consistent with the simulation results made by using a 1D slab structure model. Although many groups have developed procedures to successfully grow self-assembled photonic crystals on substrates, we believe this is the first application of grown opals over functioning integrated electronics. This work explored the ability to include photonic functionality on the wafer with integrated electronic circuitry, and demonstrated a simple, practical and economic way to achieve it. The second device is a tunable planar waveguide with an optically defined 1D photonic crystal cladding layer. In this section a planar waveguide with a photosensitive cladding layer (mixture of PMMA co DR1 and side-chain nematic liquid crystal polymer) that is optically addressable and reversible is presented. The maximum of intensity decrease of the

  10. Optimization of band gap of photonic crystals fabricated by holographic lithography

    NASA Astrophysics Data System (ADS)

    Yang, X.-L.; Cai, L.-Z.; Wang, Y.-R.; Feng, C.-S.; Dong, G.-Y.; Shen, X.-X.; Meng, X.-F.; Hu, Y.

    2008-01-01

    Generally the photonic band gap (PBG) is a multi-variable function of several parameters related to the shape and size of the dielectric columns of photonic crystals (PhCs), and a time-consuming step-by-step scanning process for each parameter has to be used to find their best combination yielding maximum PBG. In this letter, the widely used Nelder-Mead simplex algorithm is introduced to optimize these parameters simultaneously to find a larger PBG for a new kind of two-dimensional (2D) hexagonal GaAs-Air PhC. This structure can be conveniently produced by the single-exposure holographic lithography, and the specific holographic design is also systematically investigated. This study reveals that the band gaps of PhCs made by holographic lithography may be widened by introducing irregularity of the columns and lowering the symmetry of the structure.

  11. Pure & crystallized 2D Boron Nitride sheets synthesized via a novel process coupling both PDCs and SPS methods

    PubMed Central

    Yuan, Sheng; Linas, Sébastien; Journet, Catherine; Steyer, Philippe; Garnier, Vincent; Bonnefont, Guillaume; Brioude, Arnaud; Toury, Bérangère

    2016-01-01

    Within the context of emergent researches linked to graphene, it is well known that h-BN nanosheets (BNNSs), also referred as 2D BN, are considered as the best candidate for replacing SiO2 as dielectric support or capping layers for graphene. As a consequence, the development of a novel alternative source for highly crystallized h-BN crystals, suitable for a further exfoliation, is a prime scientific issue. This paper proposes a promising approach to synthesize pure and well-crystallized h-BN flakes, which can be easily exfoliated into BNNSs. This new accessible production process represents a relevant alternative source of supply in response to the increasing need of high quality BNNSs. The synthesis strategy to prepare pure h-BN is based on a unique combination of the Polymer Derived Ceramics (PDCs) route with the Spark Plasma Sintering (SPS) process. Through a multi-scale chemical and structural investigation, it is clearly shown that obtained flakes are large (up to 30 μm), defect-free and well crystallized, which are key-characteristics for a subsequent exfoliation into relevant BNNSs. PMID:26843122

  12. Pure & crystallized 2D Boron Nitride sheets synthesized via a novel process coupling both PDCs and SPS methods

    NASA Astrophysics Data System (ADS)

    Yuan, Sheng; Linas, Sébastien; Journet, Catherine; Steyer, Philippe; Garnier, Vincent; Bonnefont, Guillaume; Brioude, Arnaud; Toury, Bérangère

    2016-02-01

    Within the context of emergent researches linked to graphene, it is well known that h-BN nanosheets (BNNSs), also referred as 2D BN, are considered as the best candidate for replacing SiO2 as dielectric support or capping layers for graphene. As a consequence, the development of a novel alternative source for highly crystallized h-BN crystals, suitable for a further exfoliation, is a prime scientific issue. This paper proposes a promising approach to synthesize pure and well-crystallized h-BN flakes, which can be easily exfoliated into BNNSs. This new accessible production process represents a relevant alternative source of supply in response to the increasing need of high quality BNNSs. The synthesis strategy to prepare pure h-BN is based on a unique combination of the Polymer Derived Ceramics (PDCs) route with the Spark Plasma Sintering (SPS) process. Through a multi-scale chemical and structural investigation, it is clearly shown that obtained flakes are large (up to 30 μm), defect-free and well crystallized, which are key-characteristics for a subsequent exfoliation into relevant BNNSs.

  13. A meshfree local RBF collocation method for anti-plane transverse elastic wave propagation analysis in 2D phononic crystals

    NASA Astrophysics Data System (ADS)

    Zheng, Hui; Zhang, Chuanzeng; Wang, Yuesheng; Sladek, Jan; Sladek, Vladimir

    2016-01-01

    In this paper, a meshfree or meshless local radial basis function (RBF) collocation method is proposed to calculate the band structures of two-dimensional (2D) anti-plane transverse elastic waves in phononic crystals. Three new techniques are developed for calculating the normal derivative of the field quantity required by the treatment of the boundary conditions, which improve the stability of the local RBF collocation method significantly. The general form of the local RBF collocation method for a unit-cell with periodic boundary conditions is proposed, where the continuity conditions on the interface between the matrix and the scatterer are taken into account. The band structures or dispersion relations can be obtained by solving the eigenvalue problem and sweeping the boundary of the irreducible first Brillouin zone. The proposed local RBF collocation method is verified by using the corresponding results obtained with the finite element method. For different acoustic impedance ratios, various scatterer shapes, scatterer arrangements (lattice forms) and material properties, numerical examples are presented and discussed to show the performance and the efficiency of the developed local RBF collocation method compared to the FEM for computing the band structures of 2D phononic crystals.

  14. Analytic theory for the selection of 2-D needle crystal at arbitrary Peclet number

    NASA Technical Reports Server (NTRS)

    Tanveer, Saleh

    1989-01-01

    An accurate analytic theory is presented for the velocity selection of a two-dimensional needle crystal for arbitrary Peclet number for small values of the surface tension parameter. The velocity selection is caused by the effect of transcendentally small terms which are determined by analytic continuation to the complex plane and analysis of nonlinear equations. The work supports the general conclusion of previous small Peclet number analytical results of other investigators, though there are some discrepancies in details. It also addresses questions raised on the validity of selection theory owing to assumptions made on shape corrections at large distances from the tip.

  15. Non-equilibrium dynamics of 2D liquid crystals driven by transmembrane gas flow.

    PubMed

    Seki, Kazuyoshi; Ueda, Ken; Okumura, Yu-ichi; Tabe, Yuka

    2011-07-20

    Free-standing films composed of several layers of chiral smectic liquid crystals (SmC*) exhibited unidirectional director precession under various vapor transfers across the films. When the transferred vapors were general organic solvents, the precession speed linearly depended on the momentum of the transmembrane vapors, where the proportional constant was independent of the kind of vapor. In contrast, the same SmC* films under water transfer exhibited precession in the opposite direction. As a possible reason for the rotational inversion, we suggest the competition of two origins for the torques, one of which is microscopic and the other macroscopic. Next, we tried to move an external object by making use of the liquid crystal (LC) motion. When a solid or a liquid particle was set on a film under vapor transfer, the particle was rotated in the same direction as the LC molecules. Using home-made laser tweezers, we measured the force transmitted from the film to the particle, which we found to be several pN. PMID:21709328

  16. Non-equilibrium dynamics of 2D liquid crystals driven by transmembrane gas flow

    NASA Astrophysics Data System (ADS)

    Seki, Kazuyoshi; Ueda, Ken; Okumura, Yu-ichi; Tabe, Yuka

    2011-07-01

    Free-standing films composed of several layers of chiral smectic liquid crystals (SmC*) exhibited unidirectional director precession under various vapor transfers across the films. When the transferred vapors were general organic solvents, the precession speed linearly depended on the momentum of the transmembrane vapors, where the proportional constant was independent of the kind of vapor. In contrast, the same SmC* films under water transfer exhibited precession in the opposite direction. As a possible reason for the rotational inversion, we suggest the competition of two origins for the torques, one of which is microscopic and the other macroscopic. Next, we tried to move an external object by making use of the liquid crystal (LC) motion. When a solid or a liquid particle was set on a film under vapor transfer, the particle was rotated in the same direction as the LC molecules. Using home-made laser tweezers, we measured the force transmitted from the film to the particle, which we found to be several pN.

  17. Coherent heat transport in 2D phononic crystals with acoustic impedance mismatch

    NASA Astrophysics Data System (ADS)

    Arantes, A.; Anjos, V.

    2016-03-01

    In this work we have calculated the cumulative thermal conductivities of micro-phononic crystals formed by different combinations of inclusions and matrices at a sub-Kelvin temperature regime. The low-frequency phonon spectra (up to tens of GHz) were obtained by solving the generalized wave equation for inhomogeneous media with the plane wave expansion method. The thermal conductivity was calculated from Boltzmann transport theory highlighting the role of the low-frequency thermal phonons and neglecting phonon-phonon scattering. A purely coherent thermal transport regime was assumed throughout the structures. Our findings show that the cumulative thermal conductivity drops dramatically when compared with their bulk counterpart. Depending on the structural composition this reduction may be attributed to the phonon group velocity due to a flattening of the phonon dispersion relation, the extinction of phonon modes in the density of states or due to the presence of complete band gaps. According to the contrast between the inclusions and the matrices, three types of two dimensional phononic crystals were considered: carbon/epoxy, carbon/polyethylene and tungsten/silicon, which correspond respectively to a moderate, strong and very strong mismatch in the mechanical properties of these materials.

  18. Engineered atom-light interactions in 1D photonic crystals

    NASA Astrophysics Data System (ADS)

    Martin, Michael J.; Hung, Chen-Lung; Yu, Su-Peng; Goban, Akihisa; Muniz, Juan A.; Hood, Jonathan D.; Norte, Richard; McClung, Andrew C.; Meenehan, Sean M.; Cohen, Justin D.; Lee, Jae Hoon; Peng, Lucas; Painter, Oskar; Kimble, H. Jeff

    2014-05-01

    Nano- and microscale optical systems offer efficient and scalable quantum interfaces through enhanced atom-field coupling in both resonators and continuous waveguides. Beyond these conventional topologies, new opportunities emerge from the integration of ultracold atomic systems with nanoscale photonic crystals. One-dimensional photonic crystal waveguides can be engineered for both stable trapping configurations and strong atom-photon interactions, enabling novel cavity QED and quantum many-body systems, as well as distributed quantum networks. We present the experimental realization of such a nanophotonic quantum interface based on a nanoscale photonic crystal waveguide, demonstrating a fractional waveguide coupling of Γ1 D /Γ' of 0 . 32 +/- 0 . 08 , where Γ1 D (Γ') is the atomic emission rate into the guided (all other) mode(s). We also discuss progress towards intra-waveguide trapping of ultracold Cs. This work was supported by the IQIM, an NSF Physics Frontiers Center with support from the Moore Foundation, the DARPA ORCHID program, the AFOSR QuMPASS MURI, the DoD NSSEFF program, NSF, and the Kavli Nanoscience Institute (KNI) at Caltech.

  19. Controlling interactions between coupled photonic crystal cavities using photochromic tuning

    NASA Astrophysics Data System (ADS)

    Cai, Tao; Bose, Ranojoy; Solomon, Glenn; Waks, Edo

    2013-03-01

    Strongly coupled photonic crystal (PhC) resonator systems provide a promising platform for studying cavity quantum electrodynamics (QED) using semiconductor quantum dots (QDs). These device structures enable important applications such as photon blockade, quantum simulation, quantum-optical Josephson interferometer, and quantum phase transition of light. Many of these applications require the ability to accurately tune the resonant frequencies of individual cavities in the array, which provides a method to control their coupling interactions. This tuning method must be sufficiently local to address individual cavities spaced by less than 1 micron spatial separation. Here, we present a method for controlling the coupling interaction of photonic crystal cavity arrays by using a local and reversible photochromic tuning technique. By locally altering the refractive index of the photochromic material all-optically, the coupling interaction between two cavity modes could be modified over a tuning range as large as 700 GHz. By using this technique, we demonstrate the ability to couple photonic crystal cavities with a normal mode splitting of only 31.50 GHz. We further demonstrate that this tuning method can be extended to control the coupling interaction in larger cavity arrays.

  20. Photonic-magnonic crystals: Multifunctional periodic structures for magnonic and photonic applications

    SciTech Connect

    Kłos, J. W. Krawczyk, M.; Dadoenkova, Yu. S.; Dadoenkova, N. N.; Lyubchanskii, I. L.

    2014-05-07

    We investigate the properties of a photonic-magnonic crystal, a complex multifunctional one-dimensional structure with magnonic and photonic band gaps in the GHz and PHz frequency ranges for spin waves and light, respectively. The system consists of periodically distributed dielectric magnetic slabs of yttrium iron garnet and nonmagnetic spacers with an internal structure of alternating TiO{sub 2} and SiO{sub 2} layers which form finite-size dielectric photonic crystals. We show that the spin-wave coupling between the magnetic layers, and thus the formation of the magnonic band structure, necessitates a nonzero in-plane component of the spin-wave wave vector. A more complex structure perceived by light is evidenced by the photonic miniband structure and the transmission spectra in which we have observed transmission peaks related to the repetition of the magnetic slabs in the frequency ranges corresponding to the photonic band gaps of the TiO{sub 2}/SiO{sub 2} stack. Moreover, we show that these modes split to very high sharp (a few THz wide) subpeaks in the transmittance spectra. The proposed novel multifunctional artificial crystals can have interesting applications and be used for creating common resonant cavities for spin waves and light to enhance the mutual influence between them.

  1. Synthetic routes and applications of photonic crystal composites

    NASA Astrophysics Data System (ADS)

    Jiang, Ping

    This dissertation focuses on: (1) the development of synthetic routes to fabricate robust photonic crystal composites that allows for a wide range of monomeric systems to be utilized in the encapsulation procedure to a priori design the final optical and thermomechanical characteristics of the composite and (2) the characterization of the optical and thermomechanical properties of the composites and their exploitation in potential applications. In the first section, two strategies were developed, one using poly(ethylene glycol) (PEG) and its acrylate derivatives as matrixes to encapsulate the CCA of polystyrene spheres and to form a photonic crystal hydrogel (PCH) composite. The second strategy employs the technique of first dehydrating the PCH composite, then swelling it in a monomeric solution, and finally photopolymerizing it in situ, to form a water-free photonic crystal, or photonic band gap (PBG) composite. In the second section, the mechanochromic and solvatochromic responses of the PBG composite composed of poly(EGMEA) were characterized. This composite exhibited a reversible color variation at deformation frequencies up to 200 Hz and a 172 nm total stop band tuning range between +/-120V applied voltages when it was coupled with a piezoelectric actuator. Based on this effect, approaches for generating complex permanent multicolor patterns in both PBG and PCH films were developed. Finally, two types of potential sensing systems were explored in this dissertation. One is a chemical vapor sensing system composed of the poly(EGMEA)-based PBG composite film. The second is a label-free optical bio-recognition system composed of an antigen-selective photonic crystal hydrogel (PCH). The avidin molecules were first covalently immobilized in the PCH film. The biotinylated capture antibody was then introduced into the film through the non-covalent avidin-biotin binding. (Abstract shortened by UMI.)

  2. Photon assisted hopping conduction mechanism in Tl2SSe crystals

    NASA Astrophysics Data System (ADS)

    Qasrawi, A. F.; Ziqan, Abdelhalim M.; Jazzar, Suha Kh.; Gasanly, N. M.

    2015-02-01

    In this article, the powder X-ray diffraction data and the dark and the photo-excited electrical conduction parameters of Tl2SSe crystal are reported. The dark and photon excited electrical conduction in the tetragonal crystal are found to be dominated by thermionic emission assisted variable range hopping conduction (VRH). The dark Mott's VRH parameters representing by the degree of disorder (To), the density of localized states near the Fermi level (N (EF)), the average hopping range (R) and average hopping energy (W) exhibited wide tunability via incremental photon intensity. Particularly, while the dark values of T0 , W and R significantly decreased from 2.32 ×108 to 1.52 ×105 K, 114 to 18.25 meV and from 66.15 to 10.58 A°, respectively, the values of N (EF) increased from 7.23 ×1018 to 1.10 ×1022cm-3 /eV when the crystal was photo-excited with a 53.6 mW/cm2 light intensity. These variations in the hopping parameters via photon excitations are promisig for using the crystal in the fabrication of well controlled, widely tunable, low energy consuming and highly efficient electronic devices.

  3. Dispersion relations of externally and thermally excited dust lattice modes in 2D complex plasma crystals

    SciTech Connect

    Yang Xuefeng; Cui Jian; Zhang Yuan; Liu Yue

    2012-07-15

    The dispersion relations of the externally and thermally (naturally) excited dust lattice modes (both longitudinal and transverse) in two-dimensional Debye-Yukawa complex plasma crystals are investigated. The dispersion relations are calculated numerically by taking the neutral gas damping effects into account and the numerical results are in agreement with the experimental data given by Nunomura et al.[Phys. Rev. E 65, 066402 (2002)]. It is found that for the mode excited by an external disturbance with a real frequency, the dispersion properties are changed at a critical frequency near where the group velocity of the mode goes to zero. Therefore, the high frequency branch with negative dispersion cannot be reached. In contrast, for the thermally excited mode, the dispersion curve can extend all the way to the negative dispersion region, while a 'cut-off' wave number exists at the long wavelength end of the dispersion in the transverse mode.

  4. High-Q silicon carbide photonic-crystal cavities

    SciTech Connect

    Lee, Jonathan Y.; Lu, Xiyuan; Lin, Qiang

    2015-01-26

    We demonstrate one-dimensional photonic-crystal nanobeam cavities in amorphous silicon carbide. The fundamental mode exhibits intrinsic optical quality factor as high as 7.69 × 10{sup 4} with mode volume ∼0.60(λ/n){sup 3} at wavelength 1.5 μm. A corresponding Purcell factor value of ∼10{sup 4} is the highest reported to date in silicon carbide optical cavities. The device exhibits great potential for integrated nonlinear photonics and cavity nano-optomechanics.

  5. Generation of higher odd harmonics in a defective photonic crystal

    SciTech Connect

    Ramanujam, N. R.; Wilson, K. S. Joseph

    2015-06-24

    A photonic crystal (AB){sup 2}(DB)(AB){sup 2} with high refractive index medium as silicon and low refractive medium as air is considered. Using the transfer matrix method, the transmission properties as a function of wavelength with photonic band gaps has been obtained. We are able to demonstrate the generation of third, fifth, seventh and ninth harmonics in the present work. We show that if the air medium is removed in the defect, the defect modes are generated but not harmonics. It can be designed to have a frequency conversion, and have a potential for becoming the basis for the next generation of optical devices.

  6. Optical modulator based on GaAs photonic crystals

    NASA Astrophysics Data System (ADS)

    Li, Jiusheng

    2005-11-01

    In this letter, we propose a novel optical modulator based on GaAs photonic crystals and investigate its optically properties numerically by using the finite-difference time-domain method. The position of the cutoff frequency can be varied by free carriers injection, and the band gap shift can be observed. Band gap shift is used to modulate light. Bing several micrometers length, low insertion loss, and large extinction ratios, the modulator can be used in ultra-small and ultra-dense photonic integrated circuits.

  7. Field expulsion and reconfiguration in polaritonic photonic crystals.

    PubMed

    Huang, Kerwyn Casey; Bienstman, Peter; Joannopoulos, John D; Nelson, Keith A; Fan, Shanhui

    2003-05-16

    We uncover a rich set of optical phenomena stemming from the incorporation of polar materials exhibiting transverse phonon polariton excitations into a photonic crystal structure. We identify in the frequency spectrum two regimes in which the dielectric response of the polaritonic medium can induce extreme localization of the electromagnetic energy. Our analysis of the effect of polarization and the interaction between the polariton and photonic band gaps on the Bloch states leads to a pair of mechanisms for sensitive frequency-controlled relocation and/or reconfiguration of the fields. PMID:12785962

  8. Luneburg and flat lens based on graded photonic crystal

    NASA Astrophysics Data System (ADS)

    Liu, Wei; Sun, Xiaohong; Gao, Minglei; Wang, Shuai

    2016-04-01

    Square-lattice graded photonic crystals employed for designing Luneburg and Flat Lens is presented. Comparable simulation of the Luneburg lens with TE and TM polarizations predicts that TM lens possesses of enlarged transmission bandwidth and strengthened focusing ability, in comparison with TE lens. As a typical simplified counterpart, the evolution of focusing intensity and numerical aperture of the flat lens is achieved. What is more, those Luneburg and Flat Lens can withstand imperfect gradients in structure design. This will provide a guidance to produce a high quality focusing lens with small size, short focal length and large numerical aperture applied in the integrated photonic devices.

  9. Nonreciprocal optical properties in resonant hybrid photonic crystals

    NASA Astrophysics Data System (ADS)

    D'Andrea, A.; Tomassini, N.

    2016-07-01

    The present work is devoted to the theoretical study of the nonreciprocal optical properties in hybrid (isotropic and anisotropic) periodic multilayers for photon energy values chosen close to the electronic energy gaps of semiconductors (excitons). The optical properties of these resonant nonmagnetic photonic crystals, where linear and quadratic spatial dispersion effects are both present, will be studied in the framework of exciton-polariton self-consistent solutions of the Maxwell and Schrödinger equations in the effective-mass approximation. The main interesting optical properties, namely, giant transmission, absorption suppression, and optical unidirectional propagation, will be computed by implementing a two-layer "minimum model."

  10. Generation of higher odd harmonics in a defective photonic crystal

    NASA Astrophysics Data System (ADS)

    Ramanujam, N. R.; Wilson, K. S. Joseph

    2015-06-01

    A photonic crystal (AB)2(DB)(AB)2 with high refractive index medium as silicon and low refractive medium as air is considered. Using the transfer matrix method, the transmission properties as a function of wavelength with photonic band gaps has been obtained. We are able to demonstrate the generation of third, fifth, seventh and ninth harmonics in the present work. We show that if the air medium is removed in the defect, the defect modes are generated but not harmonics. It can be designed to have a frequency conversion, and have a potential for becoming the basis for the next generation of optical devices.

  11. Slow light SOI slot photonic crystal waveguides with low loss

    NASA Astrophysics Data System (ADS)

    Caer, Charles; Combrie, Sylvain; Le Roux, Xavier; De Rossi, Alfredo; Cassan, Eric

    2013-05-01

    Slow light in SOI Slotted Photonic Crystal Waveguides (SPCW) infiltrated by a refractive liquid are investigated. By employing an interferometric technique similar to Optical Coherent Tomography (OCT), we report a group velocity lower than c/20 over a 1 mm-long SPCW. From the OCT measurements, we also infer moderate propagation losses. In the fast light regime (nG <10) propagation loss is about 15 dB.cm-1. Moreover, the coupling to slow modes is efficient. These results show that infiltrated slow light SPCW are a promising route to silicon organic hybrid photonics.

  12. Hybrid squeezing of solitonic resonant radiation in photonic crystal fibers

    SciTech Connect

    Tran, Truong X.; Cassemiro, Katiuscia N.; Soeller, Christoph; Biancalana, Fabio; Blow, Keith J.

    2011-07-15

    We report the existence of a kind of squeezing in photonic crystal fibers which is conceptually intermediate between four-wave-mixing-induced squeezing in which all the participant waves are monochromatic waves, and self-phase-modulation-induced squeezing for a single pulse in a coherent state. This hybrid squeezing occurs when an arbitrary short soliton emits quasimonochromatic resonant radiation near a zero-group-velocity-dispersion point of the fiber. Photons around the resonant frequency become strongly correlated due to the presence of the classical soliton, and a reduction of the quantum noise below the shot-noise level is predicted.

  13. Photoscattering effect in supercontinuum-generating photonic crystal fiber

    PubMed Central

    Tu, H.; Marks, D. L.; Jiang, Z.; Boppart, S. A.

    2010-01-01

    A photosensitivity different from that responsible for fiber grating inscription is found in a supercontinuum-generating photonic crystal fiber transmitting intense 818 nm femtosecond pulses. This photosensitivity progressively generates a waveguide at the entrance of the fiber to scatter light of specific wavelengths and is termed as the photoscattering effect. This effect is linked to the ~800 nm photosensitivity in the microlithography of bulk silica glass. While the effect somewhat limits fiber-optic supercontinuum applications, it can be beneficial to produce new photonic devices. PMID:21350681

  14. Broadband single-photon-level memory in a hollow-core photonic crystal fibre

    NASA Astrophysics Data System (ADS)

    Sprague, M. R.; Michelberger, P. S.; Champion, T. F. M.; England, D. G.; Nunn, J.; Jin, X.-M.; Kolthammer, W. S.; Abdolvand, A.; Russell, P. St. J.; Walmsley, I. A.

    2014-04-01

    Storing information encoded in light is critical for realizing optical buffers for all-optical signal processing and quantum memories for quantum information processing. These proposals require efficient interaction between atoms and a well-defined optical mode. Photonic crystal fibres can enhance light-matter interactions and have engendered a broad range of nonlinear effects; however, the storage of light has proven elusive. Here, we report the first demonstration of an optical memory in a hollow-core photonic crystal fibre. We store gigahertz-bandwidth light in the hyperfine coherence of caesium atoms at room temperature using a far-detuned Raman interaction. We demonstrate a signal-to-noise ratio of 2.6:1 at the single-photon level and a memory efficiency of 27 +/- 1%. Our results demonstrate the potential of a room-temperature fibre-integrated optical memory for implementing local nodes of quantum information networks.

  15. Polarization Engineering in Photonic Crystal Waveguides for Spin-Photon Entanglers.

    PubMed

    Young, A B; Thijssen, A C T; Beggs, D M; Androvitsaneas, P; Kuipers, L; Rarity, J G; Hughes, S; Oulton, R

    2015-10-01

    By performing a full analysis of the projected local density of states (LDOS) in a photonic crystal waveguide, we show that phase plays a crucial role in the symmetry of the light-matter interaction. By considering a quantum dot (QD) spin coupled to a photonic crystal waveguide (PCW) mode, we demonstrate that the light-matter interaction can be asymmetric, leading to unidirectional emission and a deterministic entangled photon source. Further we show that understanding the phase associated with both the LDOS and the QD spin is essential for a range of devices that can be realized with a QD in a PCW. We also show how suppression of quantum interference prevents dipole induced reflection in the waveguide, and highlight a fundamental breakdown of the semiclassical dipole approximation for describing light-matter interactions in these spin dependent systems. PMID:26550722

  16. A compact photonic crystal micro-cavity on a single-mode lithium niobate photonic wire

    NASA Astrophysics Data System (ADS)

    Cai, Lutong; Zhang, Shaomei; Hu, Hui

    2016-03-01

    The properties of the guided modes, including the single-mode conditions and the coupling of different polarized modes in the single-crystal lithium niobate photonic wires, were analyzed in detail. One-dimensional photonic crystal micro-cavities with several different patterns, which could be used as an ultra-compact optical filter, were designed and simulated in order to get high transmission at the resonant wavelength and the best preferment. The designed structure, with the whole size of 6.5 × 0.7 μm2, was fabricated on a single-mode photonic wire. A measured peak transmission of 0.34 at 1400 nm, an extinction ratio of 12.5 dB and a Q factor of 156 were obtained. The measured transmission spectrum was basically consistent with the simulation, although a slight shift of resonant wavelength occurred due to the fabrication errors.

  17. Holographic polymer-dispersed liquid crystal Bragg grating integrated inside a solid core photonic crystal fiber.

    PubMed

    Zito, Gianluigi; Pissadakis, Stavros

    2013-09-01

    A polymer/liquid crystal-based fiber Bragg grating (PLC-FBG) is fabricated with visible two-beam holography by photo-induced modulation of a prepolymer/liquid crystal solution infiltrated into the hollow channels of a solid core photonic crystal fiber (PCF). The fabrication process and effects related to the photonic bandgap guidance into the infiltrated PCF, and characterization of the PLC-FBG, are discussed. Experimental data presented here demonstrate that the liquid crystal inclusions of the PLC-FBG lead to high thermal and bending sensitivities. The microscopic behavior of the polymer/liquid crystal phase separation inside the PCF capillaries is examined using scanning electron microscopy, and is discussed further. PMID:23988927

  18. Electromagnetic Wave Propagation in Two-Dimensional Photonic Crystals

    SciTech Connect

    Stavroula Foteinopoulou

    2003-12-12

    In this dissertation, they have undertaken the challenge to understand the unusual propagation properties of the photonic crystal (PC). The photonic crystal is a medium where the dielectric function is periodically modulated. These types of structures are characterized by bands and gaps. In other words, they are characterized by frequency regions where propagation is prohibited (gaps) and regions where propagation is allowed (bands). In this study they focus on two-dimensional photonic crystals, i.e., structures with periodic dielectric patterns on a plane and translational symmetry in the perpendicular direction. They start by studying a two-dimensional photonic crystal system for frequencies inside the band gap. The inclusion of a line defect introduces allowed states in the otherwise prohibited frequency spectrum. The dependence of the defect resonance state on different parameters such as size of the structure, profile of incoming source, etc., is investigated in detail. For this study, they used two popular computational methods in photonic crystal research, the Finite Difference Time Domain method (FDTD) and the Transfer Matrix Method (TMM). The results for the one-dimensional defect system are analyzed, and the two methods, FDTD and TMM, are compared. Then, they shift their attention only to periodic two-dimensional crystals, concentrate on their band properties, and study their unusual refractive behavior. Anomalous refractive phenomena in photonic crystals included cases where the beam refracts on the ''wrong'' side of the surface normal. The latter phenomenon, is known as negative refraction and was previously observed in materials where the wave vector, the electric field, and the magnetic field form a left-handed set of vectors. These materials are generally called left-handed materials (LHM) or negative index materials (NIM). They investigated the possibility that the photonic crystal behaves as a LHM, and how this behavior relates with the observed

  19. Two-photon excited UV fluorescence for protein crystal detection

    SciTech Connect

    Madden, Jeremy T.; DeWalt, Emma L.; Simpson, Garth J.

    2011-10-01

    Complementary measurements using SONICC and TPE-UVF allow the sensitive and selective detection of protein crystals. Two-photon excited ultraviolet fluorescence (TPE-UVF) microscopy is explored for sensitive protein-crystal detection as a complement to second-order nonlinear optical imaging of chiral crystals (SONICC). Like conventional ultraviolet fluorescence (UVF), TPE-UVF generates image contrast based on the intrinsic fluorescence of aromatic residues, generally producing higher fluorescence emission within crystals than the mother liquor by nature of the higher local protein concentration. However, TPE-UVF has several advantages over conventional UVF, including (i) insensitivity to optical scattering, allowing imaging in turbid matrices, (ii) direct compatibility with conventional optical plates and windows by using visible light for excitation, (iii) elimination of potentially damaging out-of-plane UV excitation, (iv) improved signal to noise through background reduction from out-of-plane excitation and (v) relatively simple integration into instrumentation developed for SONICC.

  20. Entangled, guided photon generation in (1+1)-dimensional photonic crystals

    SciTech Connect

    Sciscione, L.; Centini, M.; Sibilia, C.; Bertolotti, M.; Scalora, M.

    2006-07-15

    A scheme based on photonic crystal technology is proposed as an ultrabright source of entangled photons on a miniaturized scale. The geometry consists of a multilayer microcavity, excited by a resonant pump frequency, such that the emitted photons are guided transversally to the direction of the incident pump. The entanglement occurs in direction, frequency, and polarization, and the bandwidth of the emitted photons is of the order of 1 nm. We propose a feasible design based on Al{sub 0.3}Ga{sub 0.7}As/Al{sub 2}O{sub 3} structures and predict an emission rate 10{sup 5} pairs per second with 100 mW pump power. These results are promising for realization of chip and future quantum computer applications.

  1. Magneto-elastic coupling in a potential ferromagnetic 2D atomic crystal

    NASA Astrophysics Data System (ADS)

    Tian, Yao; Gray, Mason J.; Ji, Huiwen; Cava, R. J.; Burch, Kenneth S.

    2016-06-01

    Cr2Ge2Te6 has been of interest for decades, as it is one of only a few naturally forming ferromagnetic semiconductors. Recently, this material has been revisited due to its potential as a two-dimensional semiconducting ferromagnet and a substrate to induce anomalous quantum Hall states in topological insulators. However, many relevant properties of Cr2Ge2Te6 still remain poorly understood, especially the spin-phonon coupling crucial to spintronic, multiferrioc, thermal conductivity, magnetic proximity and the establishment of long range order on the nanoscale. We explore the interplay between the lattice and magnetism through high resolution micro-Raman scattering measurements over the temperature range from 10 to 325 K. Strong spin-phonon coupling effects are confirmed from multiple aspects: two low energy modes splits in the ferromagnetic phase, magnetic quasielastic scattering in the paramagnetic phase, the phonon energies of three modes show clear upturn below T C, and the phonon linewidths change dramatically below T C as well. Our results provide the first demonstration of spin-phonon coupling in a potential two-dimensional atomic crystal.

  2. An energy stable, hexagonal finite difference scheme for the 2D phase field crystal amplitude equations

    NASA Astrophysics Data System (ADS)

    Guan, Zhen; Heinonen, Vili; Lowengrub, John; Wang, Cheng; Wise, Steven M.

    2016-09-01

    In this paper we construct an energy stable finite difference scheme for the amplitude expansion equations for the two-dimensional phase field crystal (PFC) model. The equations are formulated in a periodic hexagonal domain with respect to the reciprocal lattice vectors to achieve a provably unconditionally energy stable and solvable scheme. To our knowledge, this is the first such energy stable scheme for the PFC amplitude equations. The convexity of each part in the amplitude equations is analyzed, in both the semi-discrete and fully-discrete cases. Energy stability is based on a careful convexity analysis for the energy (in both the spatially continuous and discrete cases). As a result, unique solvability and unconditional energy stability are available for the resulting scheme. Moreover, we show that the scheme is point-wise stable for any time and space step sizes. An efficient multigrid solver is devised to solve the scheme, and a few numerical experiments are presented, including grain rotation and shrinkage and grain growth studies, as examples of the strength and robustness of the proposed scheme and solver.

  3. High conductance 2D transport around the Hall mobility peak in electrolyte-gated rubrene crystals.

    PubMed

    Xie, Wei; Wang, Shun; Zhang, Xin; Leighton, C; Frisbie, C Daniel

    2014-12-12

    We report the observation of the Hall effect at hole densities up to 6×10¹³ cm⁻² (0.3  holes/molecule) on the surface of electrolyte-gated rubrene crystals. The perplexing peak in the conductance as a function of gate voltage is confirmed to result from a maximum in mobility, which reaches 4  cm² V⁻¹ s⁻¹ at 2.5×10¹³ cm⁻². Measurements to liquid helium temperatures reveal that this peak is markedly asymmetric, with bandlike and hopping-type transport occurring on the low density side, while unconventional, likely electrostatic-disorder-affected transport dominates the high density side. Most significantly, near the mobility peak the temperature coefficient of the resistance remains positive to as low as 120 K, the low temperature resistance becomes weakly temperature dependent, and the conductance reaches within a factor of 2 of e²/h, revealing conduction unprecedentedly close to a two-dimensional metallic state. PMID:25541790

  4. Dispersion properties of transverse anisotropic liquid crystal core photonic crystal fibers

    NASA Astrophysics Data System (ADS)

    Karasawa, Naoki

    2016-04-01

    The dispersion properties of liquid crystal core photonic crystal fibers for different core diameters have been calculated by a full vectorial finite difference method. In calculations, air holes are assumed to be arranged in a regular hexagonal array in fused silica and a central hole is filled with liquid crystal to create a core. In this study, three types of transverse anisotropic configurations, where liquid crystal molecules are oriented in a transverse plane, and a planar configuration, where liquid crystal molecules are oriented in a propagation direction, are considered. The large changes of the dispersion properties are found when the orientation of the liquid crystal molecules is changed from a planar configuration to a uniform configuration, where all molecules are oriented in the same direction in a transverse plane. Since the orientation of liquid crystal molecules may be controlled by applying an electric field, it could be utilized for various applications including the spectral control of supercontinuum generation.

  5. Photonics of liquid-crystal structures: A review

    SciTech Connect

    Palto, S. P. Blinov, L. M.; Barnik, M. I.; Lazarev, V. V.; Umanskii, B. A.; Shtykov, N. M.

    2011-07-15

    The original results of studies of the electro-optical and laser effects which have been performed at the Laboratory of Liquid Crystals of the Institute of Crystallography, Russian Academy of Sciences, over the last few years are reviewed. Cholesteric liquid crystals as vivid representatives of photonic structures and their behavior in an electric field are considered in detail. The formation of higher harmonics in the periodic distribution of the director field in a helical liquid crystal structure and, correspondingly, the new (anharmonic) mode of electro-optical effects are discussed. Another group of studies is devoted to bistable light switching by an electric field in chiral nematics. Polarization diffraction gratings controlled by an electric field are also considered. The results of studies devoted to microlasers on various photonic structures with cholesteric and nematic liquid crystals are considered in detail. Particular attention is given to the new regime: leaky-mode lasing. Designs of liquid crystal light amplifiers and their polarization, field, and spectral characteristics are considered in the last section.

  6. A composite hydrogels-based photonic crystal multi-sensor

    NASA Astrophysics Data System (ADS)

    Chen, Cheng; Zhu, Zhigang; Zhu, Xiangrong; Yu, Wei; Liu, Mingju; Ge, Qiaoqiao; Shih, Wei-Heng

    2015-04-01

    A facile route to prepare stimuli-sensitive poly(vinyl alcohol)/poly(acrylic acid) (PVA/PAA) gelated crystalline colloidal array photonic crystal material was developed. PVA was physically gelated by utilizing an ethanol-assisted method, the resulting hydrogel/crystal composite film was then functionalized with PAA to form an interpenetrating hydrogel film. This sensor film is able to efficiently diffract the visible light and rapidly respond to various environmental stimuli such as solvent, pH and strain, and the accompanying structural color shift can be repeatedly changed and easily distinguished by naked eye.

  7. Applications of the layer-KKR method to photonic crystals.

    PubMed

    Modinos, A; Stefanou, N; Yannopapas, V

    2001-01-29

    A brief introduction of the layer-Korringa-Kohn-Rostoker method for calculations of the frequency band structure of photonic crystals and of the transmission and reflection coefficients of light incident on slabs of such crystals is followed by two applications of the method. The first relates to the frequency band structure of metallodielectric composites and demonstrates the essential difference between cermet and network topology of such composites at low frequencies. The second application is an analysis of recent measurements of the reflection of light from a slab of a colloidal system consisting of latex spheres in air. PMID:19417804

  8. Quantum dots in photonic crystals: from quantum information processing to single photon nonlinear optics

    NASA Astrophysics Data System (ADS)

    Vuckovic, Jelena

    2009-05-01

    Quantum dots in photonic crystals are interesting both as a testbed for fundamental cavity quantum electrodynamics (QED) experiments, as well as a platform for quantum and classical information processing. Quantum dot-photonic crystal cavity QED has been probed both in photoluminescence and coherently, by resonant light scattering from such a system [1]. In the latter case, both intensity and photon statistics of the reflected beam have been analyzed as a function of wavelength, leading to observation of effects such as photon blockade and photon induced tunneling - for the first time in solid state [2]. The system has also been employed to achieve a controlled phase and amplitude modulation between two modes of light at the single photon level [3] - nonlinearity observed so far only in atomic physics systems. These demonstrations lie at the core of a number of proposals for quantum information processing, and could also be employed to build novel devices, such as optical switches controlled at a single photon level. [4pt] [1] Dirk Englund, Andrei Faraon, Ilya Fushman, Nick Stoltz, Pierre Petroff, and Jelena Vuckovic, ``Controlling cavity reflectivity with a single quantum dot," Nature ,ol. 450, No. 7171, pp. 857-861, December 2007[0pt] [2] Andrei Faraon, Ilya Fushman, Dirk Englund, Nick Stoltz, Pierre Petroff, and Jelena Vuckovic, ``Coherent generation of nonclassical light on a chip via photon-induced tunneling and blockade," Nature Physics ,ol. 4, pp. 859 - 863 (2008)[0pt] [3] Ilya Fushman, Dirk Englund, Andrei Faraon, Nick Stoltz, Pierre Petroff, and Jelena Vuckovic, ``Controlled phase shift with a single quantum dot," Science ,ol. 320, number 5877, pp. 769-772 ( 2008)

  9. Large mode-volume, large beta, photonic crystal laser resonator

    SciTech Connect

    Dezfouli, Mohsen Kamandar; Dignam, Marc M.

    2014-12-15

    We propose an optical resonator formed from the coupling of 13, L2 defects in a triangular-lattice photonic crystal slab. Using a tight-binding formalism, we optimized the coupled-defect cavity design to obtain a resonator with predicted single-mode operation, a mode volume five times that of an L2-cavity mode and a beta factor of 0.39. The results are confirmed using finite-difference time domain simulations. This resonator is very promising for use as a single mode photonic crystal vertical-cavity surface-emitting laser with high saturation output power compared to a laser consisting of one of the single-defect cavities.

  10. Method to fabricate a tilted logpile photonic crystal

    DOEpatents

    Williams, John D.; Sweatt, William C.

    2010-10-26

    A method to fabricate a tilted logpile photonic crystal requires only two lithographic exposures and does not require mask repositioning between exposures. The mask and photoresist-coated substrate are spaced a fixed and constant distance apart using a spacer and the stack is clamped together. The stack is then tilted at a crystallographic symmetry angle (e.g., 45 degrees) relative to the X-ray beam and rotated about the surface normal until the mask is aligned with the X-ray beam. The stack is then rotated in plane by a small stitching angle and exposed to the X-ray beam to pattern the first half of the structure. The stack is then rotated by 180.degree. about the normal and a second exposure patterns the remaining half of the structure. The method can use commercially available DXRL scanner technology and LIGA processes to fabricate large-area, high-quality tilted logpile photonic crystals.

  11. Temperature sensitivity of photonic crystal fibers infiltrated with ethanol solutions

    NASA Astrophysics Data System (ADS)

    Chu Van, Lanh; Stefaniuk, Tomasz; Kasztelanic, Rafał; Cao Long, Van; Klimczak, Mariusz; Le Van, Hieu; Trippenbach, Marek; Buczyński, Ryszard

    2015-12-01

    In this paper we present a numerical study on the optimization of dispersion of a photonic crystal fiber infiltrated with water-ethanol mixtures. The advantage of such an approach stems from the fact that the dependence of the refractive index on temperature is larger in liquids than in solid materials. Here, we examine photonic crystal fibers with a regular, hexagonal lattice and with various geometrical and material parameters, such as different number of rings of holes, various lattice constants and the size of core and air-holes. Additionally, for the optimized structure with flat dispersion characteristics, we analyze the influence of temperature and concentration of the ethanol solution on the dispersion characteristic and the zero dispersion wavelength shift of the fundamental mode.

  12. Graphene-based photonic crystal to steer giant Faraday rotation

    NASA Astrophysics Data System (ADS)

    Da, Haixia; Qiu, Cheng-Wei

    2012-06-01

    We present a graphene-based photonic-crystal schematic of enhancing and steering Faraday rotation angle of graphene. This concept is counter-intuitive because the giant Faraday rotation and high transmission can be simultaneously pronounced, which is distinguished from exisitng graphene structures reported before. It is found that chemical potential can be tailored to generate a controllable giant Faraday rotation via graphene with atomic thickness. By engineering the individual component thickness in the photonic crystal, the magneto-optical performance can be significantly improved. This is of fundamental importance in a wide range of magneto-optical applications, simply because the Faraday rotation makes sense only when the transmittivity is decently high.

  13. Flying particle sensors in hollow-core photonic crystal fibre

    NASA Astrophysics Data System (ADS)

    Bykov, D. S.; Schmidt, O. A.; Euser, T. G.; Russell, P. St. J.

    2015-07-01

    Optical fibre sensors make use of diverse physical effects to measure parameters such as strain, temperature and electric field. Here we introduce a new class of reconfigurable fibre sensor, based on a ‘flying-particle’ optically trapped inside a hollow-core photonic crystal fibre and illustrate its use in electric field and temperature sensing with high spatial resolution. The electric field distribution near the surface of a multi-element electrode is measured with a resolution of ∼100 μm by monitoring changes in the transmitted light signal due to the transverse displacement of a charged silica microparticle trapped within the hollow core. Doppler-based velocity measurements are used to map the gas viscosity, and thus the temperature, along a hollow-core photonic crystal fibre. The flying-particle approach represents a new paradigm in fibre sensors, potentially allowing multiple physical quantities to be mapped with high positional accuracy over kilometre-scale distances.

  14. Ultra-compact photonic crystal based water temperature sensor

    NASA Astrophysics Data System (ADS)

    Nikoufard, Mahmoud; Kazemi Alamouti, Masoud; Adel, Alireza

    2016-06-01

    We design an ultra-compact water temperature sensor by using the photonic crystal technology on the InP substrate at the 1.55-μm wavelength window. The photonic crystal consists of rods in a hexagonal lattice and a polymethyl methacrylate (PMMA) background. By using the plane wave expansion (PWE) method, the lattice constant and radius of rods are obtained, 520 nm and 80.6 nm, respectively. With a nanocavity placed in the waveguide, a resonance peak is observed at the 1.55-μm wavelength window. Any change of the water temperature inside the nanocavity results in the shift of the resonance wavelength. Our simulations show a shift of about 11 nm for a temperature change of 22.5 °C. The resonance wavelength has a linear relation with the water temperature.

  15. Reconfigurable photonic crystal waveguides created by selective liquid infiltration.

    PubMed

    Bedoya, A Casas; Domachuk, P; Grillet, C; Monat, C; Mägi, E C; Li, E; Eggleton, B J

    2012-05-01

    We experimentally demonstrate reconfigurable photonic crystal waveguides created directly by infiltrating high refractive index (n≈2.01) liquids into selected air holes of a two-dimensional hexagonal periodic lattice in silicon. The resulting effective index contrast is large enough that a single row of infiltrated holes enables light propagation at near-infrared wavelengths. We include a detailed comparison between modeling and experimental results of single line defect waveguides and show how our infiltration procedure is reversible and repeatable. We achieve infiltration accuracy down to the single air hole level and demonstrate control on the volume of liquid infused into the holes by simply changing the infiltration velocity. This method is promising for achieving a wide range of targeted optical functionalities on a "blank" photonic crystal membrane that can be reconfigured on demand. PMID:22565727

  16. Topological states in one dimensional solids and photonic crystals

    NASA Astrophysics Data System (ADS)

    Atherton, Timothy; Mathur, Harsh

    2011-03-01

    We show that the band structure of a one-dimensional solid with particle-hole symmetry may be characterized by a topological index that owes its existence to the non-trivial homotopy of the space of non-degenerate real symmetric matrices. Moreover we explicitly demonstrate a theorem linking the topological index to the existence of bound states on the surface of a semi-infinite one dimensional solid. Our analysis is a one-dimensional analogue of the analysis of topological insulators in two and three dimensions by Balents and Moore; our results may be relevant to long molecules that are the one dimensional analogue of topological insulators. We propose the realization of this physics in a one-dimensional photonic crystal. In this case the topology of the bandstructure reveals itself not as a bound surface state but as a Lorentzian feature in the time delay of light that is otherwise perfectly reflected by the photonic crystal.

  17. Fabrication of photonic crystal structures by tertiary-butyl arsine-based metal–organic vapor-phase epitaxy for photonic crystal lasers

    NASA Astrophysics Data System (ADS)

    Yoshida, Masahiro; Kawasaki, Masato; De Zoysa, Menaka; Ishizaki, Kenji; Hatsuda, Ranko; Noda, Susumu

    2016-06-01

    The fabrication of air/semiconductor two-dimensional photonic crystal structures by air-hole-retained crystal regrowth using tertiary-butyl arsine-based metal–organic vapor-phase epitaxy for GaAs-based photonic crystal lasers is investigated. Photonic crystal air holes with filling factors of 10–13%, depths of ∼280 nm, and widths of 120–150 nm are successfully embedded. The embedded air holes exhibit characteristic shapes due to the anisotropy of crystal growth. Furthermore, a low lasing threshold of ∼0.5 kA/cm2 is achieved with the fabricated structures.

  18. Analysis of two-dimensional photonic crystal with anisotropic gain.

    PubMed

    Takigawa, Shinichi; Noda, Susumu

    2011-05-01

    Photonic modes in a two-dimensional square-lattice photonic crystal (PC) with anisotropic gain are analyzed for the first time. A plane-wave expansion method is improved to include the gain, which depends on not only the position but also the propagation direction of each plane wave. The anisotropic gain varies the photonic band structure, the near-field distributions, and the gain dispersion curves through variation in PC symmetry. Low-threshold operation of a PC laser with anisotropic-gain material such as nonpolar InGaN requires that the direction of higher gain in the material aligns along the ΓX direction of the PC. PMID:21643205

  19. Selective mode excitation in hollow-core photonic crystal fiber

    NASA Astrophysics Data System (ADS)

    Galea, A. D.; Couny, F.; Coupland, S.; Roberts, P. J.; Sabert, H.; Knight, J. C.; Birks, T. A.; Russell, Philip St. J.

    2005-04-01

    Modes are selectively excited by launching light through the cladding from the side into a hollow-core photonic crystal fiber. Measuring the total output power at the end of the fiber as a function of the angle of incidence of the exciting laser beam provides a powerful diagnostic for characterizing the cladding bandgap. Furthermore, various types of modes on either side of the bandgap are excited individually, and their near-field images are obtained.

  20. Spatial solitons in chi(2) planar photonic crystals.

    PubMed

    Gallo, Katia; Assanto, Gaetano

    2007-11-01

    We analyze light self-confinement induced by multiple nonlinear resonances in a two-dimensional chi(2) photonic crystal. With reference to second-harmonic generation in a hexagonal lattice, we show that the system can not only support two-color (1+1)D solitary waves with enhanced confinement and steering capabilities but also enable novel features such as wavelength-dependent soliton routing. PMID:17975626

  1. Superlensing properties of one-dimensional dielectric photonic crystals

    NASA Astrophysics Data System (ADS)

    Savo, Salvatore; di Gennaro, Emiliano; Andreone, Antonello

    2009-10-01

    We present the experimental observation of the superlensing effect in a slab of a one-dimensional photonic crystal made of tilted dielectric elements. We show that this flat lens can achieve subwavelength resolution in different frequency bands. We also demonstrate that the introduction of a proper corrugation on the lens surface can dramatically improve both the transmission and the resolution of the imaged signal.

  2. Photonic crystal borax competitive binding carbohydrate sensing motif†

    PubMed Central

    Cui, Qingzhou; Muscatello, Michelle M. Ward; Asher, Sanford A.

    2009-01-01

    We developed a photonic crystal sensing method for diol containing species such as carbohydrates based on a poly(vinyl alcohol) (PVA) hydrogel containing an embedded crystalline colloidal array (CCA). The polymerized CCA (PCCA) diffracts visible light. We show that in the presence of borax the diffraction wavelength shifts as the concentration of glucose changes. The diffraction shifts result from the competitive binding of glucose to borate, which reduces the concentration of borate bound to the PVA diols. PMID:19381378

  3. Fabrication of photonic crystal lasers by nanomolding of solgel glasses.

    PubMed

    Schueller, O J; Whitesides, G M; Rogers, J A; Meier, M; Dodabalapur, A

    1999-09-20

    We demonstrate the formation, in a single process step, of periodic arrays of features of surface relief with submicrometer lateral dimensions in hybrid organic and inorganic solgel glasses by using elastomeric molding techniques. Lasers formed with molded photonic crystal resonators that consist of triangular, square, and honeycomb lattices of cylindrical posts and holes show emission spectra and lasing thresholds that are similar to devices formed by conventional high-resolution photolithographic patterning of thick layers of thermally grown oxide. PMID:18324096

  4. Optimized photonic crystal fibers supporting efficient capillary electrophoresis

    NASA Astrophysics Data System (ADS)

    Calcerrada, M.; García-Ruiz, C.; Roy, P.; Gonzalez-Herraez, M.

    2013-05-01

    In this paper we present preliminary results on the use of Photonic Crystal Fibers (PCFs) in a conventional capillary electrophoresis system to separate and detect fluorescent species. PCFs show interesting advantages over conventional capillaries for this application, including larger surface-to-volume ratio and potential for higher resolution with comparable sensitivity. Our results illustrate some of these advantages, and we point out the need for stringent tolerances in the fabrication of specific PCFs for this application.

  5. Double photonic crystal vertical-cavity surface-emitting lasers

    NASA Astrophysics Data System (ADS)

    Viktorovitch, Pierre; Sciancalepore, Corrado; Bakir, Badhise Ben; Letartre, Xavier; Seassal, Christian

    2013-03-01

    The periodic patterning of the optical medium achieved through photonic crystal membranes (PCMs) can be employed for controlling the resonant coupling of external radiation continuum to above-the-light-line flat edges of the folded band structure in strongly corrugated waveguides, resulting in high reflectivity for an efficient quasi-3D light harnessing. Recently, vertical-cavity surface-emitting lasers (VCSELs) emitting in C-band using a double set of one-dimensional Si/SiO2 photonic crystals as compact, flexible, and power efficient mirrors have been realized within a mass-scale fabrication paradigm by employing standard 200-mm microelectronics pilot lines. Conceived as the basic building block for photonics-on-silicon back-end integration of group III-V laser microsources, the extreme flexibility of the novel photonic architecture enables to perform a tailored modal selection of the optical cavity, including polarization and far-field control. It also offers a wide range of functionality, such as on-chip optical routing and a variety of efficient wavelength tuning-trimming schemes. Device compactness ensures a considerable reduction in the device footprint, power consumption, and parasitics. Furthermore, high fabrication yields obtained thanks to the state-of-the-art molecular wafer bonding of III-V alloys on silicon conjugate excellent device performances with cost-effective high-throughput production, indicating strong perspective industrial potential.

  6. Polarisation singularities in disordered photonic crystal waveguides for on-chip spin-photon entanglement

    NASA Astrophysics Data System (ADS)

    Beggs, Daryl; Lang, Ben; Young, Andrew; Oulton, Ruth

    A polarisation singularity occurs at a position in a vector field where one of the parameters of the local polarisation ellipse (handedness, eccentricity or orientation) becomes singular. With the vector nature of electromagnetic fields, optics is an obvious place for the study of polarisation singularities, and they can be found in systems ranging from tightly focused beams to speckle fields. Here we demonstrate that photonic crystal waveguides support on-chip polarisation singularities. As Bloch waves, the eigenmodes of photonic crystal waveguides possess a strong longitudinal, as well as transverse, component of their electric field. The spatial dependence of both these components and the phase between them ensures a rich and complex polarisation landscape in the waveguide. Recently, the use of polarisation singularities found in photonic crystal waveguides is generating much interest for integrated quantum information applications, as they can couple the spin-states of electrons confined to quantum dots to the optical modes of the waveguide. For example, at a circular-point (C-point), the sign of the local helicity is governed by the propagation direction of the optical mode, which allows for spin-photon coupling to one direction only. However, any real system will inevitably contain imperfections, and it is not obvious that the polarisation singularities will persist in the disordered waveguides. Here, we use calculations of the eigenmodes of disordered waveguides to demonstrate that the polarisation singularities persist far beyond realistically expected levels of disorder.

  7. Ultracompact ring resonator microwave photonic filters based on photonic crystal waveguides.

    PubMed

    Shen, Guansheng; Tian, Huiping; Ji, Yuefeng

    2013-02-20

    We design two microwave photonic filters (notch filter and bandpass filter) based on silicon on insulator (SOI) photonic crystal waveguides for a 60 GHz single-sideband signal radio-over-fiber (ROF) system. By perturbing the radii of the first two rows of holes adjacent to the photonic crystal waveguide, we obtained a broad negligible dispersion bandwidth and a corresponding constant low group velocity. With the slow light effect, the delay line of filters can be significantly reduced while providing the same delay time as fiber based delay lines. The simulation results show that the delay-line length of the notch filter is only about 25.9 μm, and it has a free spectral range of 130 GHz, a baseband width (BW) of 4.12 GHz, and a notch depth of 22 dB. The length of the bandpass filter is 62.4 μm, with a 19.6 dB extinction ratio and a 4.02 GHz BW, and the signal-to-noise ratio requirement of received data can be reduced by 9 dB for the 10(-7) bit-error ratio. Demonstrated microwave photonic crystal filters could be used in a future high-frequency millimeter ROF system. PMID:23434992

  8. Integrating photonic crystals in thin film silicon photovoltaics

    NASA Astrophysics Data System (ADS)

    O'Brien, P. G.; Chutinan, A.; Ozin, G. A.; Kherani, N. P.; Zukotynski, S.

    2010-06-01

    Wave-optics analysis is performed to investigate the benefits of integrating photonic crystals into micromorph cells. Specifically, we theoretically investigate two novel micromorph cells which integrate photonic crystals and compare their optical performance with that of conventional micromorph cells. In the first innovative micromorph cell configuration the intermediate reflector is a selectively transparent and conducting photonic crystal (STCPC). In the second micromorph cell its bottom μc-Si:H cell is structured in the form of an inverted opal. Our results show that with the AM1.5 solar spectrum at normal incidence the current generated in a conventional micromorph cell is increased from 12.1 mA/cm2 to 13.0 mA/cm2 when the bottom μc-Si:H cell is structured in the form of an inverted opal. However, the current generated in the micromorph cell can be increased to as much as 13.7 mA/cm2 when an STCPC is utilized as the intermediate reflector. Furthermore, the thickness of the μc-Si:H opal must be relatively large in order to absorb a sufficient amount of the solar irradiance, which is expected to degrade the electrical performance of the device. In contrast, our results suggest that STCPC intermediate reflectors are a viable technology that could potentially enhance the performance of micromorph cells.

  9. Label-Free Biosensor Imaging on Photonic Crystal Surfaces

    PubMed Central

    Zhuo, Yue; Cunningham, Brian T.

    2015-01-01

    We review the development and application of nanostructured photonic crystal surfaces and a hyperspectral reflectance imaging detection instrument which, when used together, represent a new form of optical microscopy that enables label-free, quantitative, and kinetic monitoring of biomaterial interaction with substrate surfaces. Photonic Crystal Enhanced Microscopy (PCEM) has been used to detect broad classes of materials which include dielectric nanoparticles, metal plasmonic nanoparticles, biomolecular layers, and live cells. Because PCEM does not require cytotoxic stains or photobleachable fluorescent dyes, it is especially useful for monitoring the long-term interactions of cells with extracellular matrix surfaces. PCEM is only sensitive to the attachment of cell components within ~200 nm of the photonic crystal surface, which may correspond to the region of most interest for adhesion processes that involve stem cell differentiation, chemotaxis, and metastasis. PCEM has also demonstrated sufficient sensitivity for sensing nanoparticle contrast agents that are roughly the same size as protein molecules, which may enable applications in “digital” diagnostics with single molecule sensing resolution. We will review PCEM’s development history, operating principles, nanostructure design, and imaging modalities that enable tracking of optical scatterers, emitters, absorbers, and centers of dielectric permittivity. PMID:26343684

  10. Transient dynamic distributed strain sensing using photonic crystal fibres

    NASA Astrophysics Data System (ADS)

    Samad, Shafeek A.; Hegde, G. M.; Roy Mahapatra, D.; Hanagud, S.

    2014-02-01

    A technique to determine the strain field in one-dimensional (1D) photonic crystal (PC) involving high strain rate, high temperature around shock or ballistic impact is proposed. Transient strain sensing is important in aerospace and other structural health monitoring (SHM) applications. We consider a MEMS based smart sensor design with photonic crystal integrated on a silicon substrate for dynamic strain correlation. Deeply etched silicon rib waveguides with distributed Bragg reflectors are suitable candidates for miniaturization of sensing elements, replacing the conventional FBG. Main objective here is to investigate the effect of non-uniform strain localization on the sensor output. Computational analysis is done to determine the static and dynamic strain sensing characteristics of the 1D photonic crystal based sensor. The structure is designed and modeled using Finite Element Method. Dynamic localization of strain field is observed. The distributed strain field is used to calculated the PC waveguide response. The sensitivity of the proposed sensor is estimated to be 0.6 pm/μɛ.

  11. Label-Free Biosensor Imaging on Photonic Crystal Surfaces.

    PubMed

    Zhuo, Yue; Cunningham, Brian T

    2015-01-01

    We review the development and application of nanostructured photonic crystal surfaces and a hyperspectral reflectance imaging detection instrument which, when used together, represent a new form of optical microscopy that enables label-free, quantitative, and kinetic monitoring of biomaterial interaction with substrate surfaces. Photonic Crystal Enhanced Microscopy (PCEM) has been used to detect broad classes of materials which include dielectric nanoparticles, metal plasmonic nanoparticles, biomolecular layers, and live cells. Because PCEM does not require cytotoxic stains or photobleachable fluorescent dyes, it is especially useful for monitoring the long-term interactions of cells with extracellular matrix surfaces. PCEM is only sensitive to the attachment of cell components within ~200 nm of the photonic crystal surface, which may correspond to the region of most interest for adhesion processes that involve stem cell differentiation, chemotaxis, and metastasis. PCEM has also demonstrated sufficient sensitivity for sensing nanoparticle contrast agents that are roughly the same size as protein molecules, which may enable applications in "digital" diagnostics with single molecule sensing resolution. We will review PCEM's development history, operating principles, nanostructure design, and imaging modalities that enable tracking of optical scatterers, emitters, absorbers, and centers of dielectric permittivity. PMID:26343684

  12. Nonsymmorphic topological photonic crystal with a single surface Dirac cone

    NASA Astrophysics Data System (ADS)

    Lu, Ling; Fang, Chen; Fu, Liang; Johnson, Steven; Joannopoulos, John; Soljacic, Marin; MIT Collaboration

    We predict a realization of the nonsymmorphic topological crystalline phase: a three-dimensional (3D) photonic crystal with a single surface Dirac cone. A single Dirac cone on the surface is the hallmark of the 3D topological insulators, where the double degeneracy at the Dirac point is protected by time-reversal symmetry and the spin-splitting away from the point is provided by the spin-orbital coupling. In our 3D topological photonic crystal, the degeneracy at the Dirac point is protected by a nonsymmorphic glide reflection and the linear splitting away from it is enabled by breaking time-reversal symmetry. Such a gapless surface state is fully robust against random disorder of any type. This bosonic topological band structure is achieved by applying alternating magnetization to gap out the 3D ''generalized Dirac points'' discovered in the bulk of our crystal. The Z2 bulk invariant is characterized through the evolution of Wannier centers. Our proposal-readily realizable using ferrimagnetic materials at microwave frequencies-can also be regarded as the photonic analog of topological crystalline insulators, providing the first 3D bosonic symmetry-protected topological system.

  13. Photonic band gaps in one-dimensional magnetized plasma photonic crystals with arbitrary magnetic declination

    SciTech Connect

    Zhang Haifeng; Liu Shaobin; Kong Xiangkun

    2012-12-15

    In this paper, the properties of photonic band gaps and dispersion relations of one-dimensional magnetized plasma photonic crystals composed of dielectric and magnetized plasma layers with arbitrary magnetic declination are theoretically investigated for TM polarized wave based on transfer matrix method. As TM wave propagates in one-dimensional magnetized plasma photonic crystals, the electromagnetic wave can be divided into two modes due to the influence of Lorentz force. The equations for effective dielectric functions of such two modes are theoretically deduced, and the transfer matrix equation and dispersion relations for TM wave are calculated. The influences of relative dielectric constant, plasma collision frequency, incidence angle, plasma filling factor, the angle between external magnetic field and +z axis, external magnetic field and plasma frequency on transmission, and dispersion relation are investigated, respectively, and some corresponding physical explanations are also given. From the numerical results, it has been shown that plasma collision frequency cannot change the locations of photonic band gaps for both modes, and also does not affect the reflection and transmission magnitudes. The characteristics of photonic band gaps for both modes can be obviously tuned by relative dielectric constant, incidence angle, plasma filling factor, the angle between external magnetic field and +z axis, external magnetic field and plasma frequency, respectively. These results would provide theoretical instructions for designing filters, microcavities, and fibers, etc.

  14. The study of thermal tunable coupling between a Superconducting photonic crystal waveguide and semi-circular photonic crystal

    NASA Astrophysics Data System (ADS)

    Oskooi, Somayeh; Barvestani, Jamal

    2016-08-01

    Through the present study, we investigated the light coupling between superconducting photonic crystal waveguide and a semi-circular photonic crystal. By using the finite difference time domain method, we evaluated the coupling efficiency between the mentioned structures at the various temperatures for different waveguide sizes. Calculation demonstrated that the coupling efficiency strongly depended on the temperature of the superconductor. The peak value of the coupling efficiency was influenced by the size of the nearest neighbor rods of waveguide. The results have shown that it is possible to obtain high efficiency at the desired temperature with proper selection of physical parameters in far-infrared frequency region. This structure has great potential in the optical integration and other areas.

  15. Improvement of transmission properties through two-bend resonance by holographic design for a two-dimensional photonic crystal waveguide.

    PubMed

    Dong, G Y; Yang, X L; Cai, L Z; Shen, X X; Wang, Y R

    2008-09-29

    We have investigated the transmission properties of a photonic crystal waveguide (PCW) formed by holographic lithography for the first time with a two-dimensional (2D) triangular holographic photonic crystal (PhC) including a line defect with two 60 masculine bends. Calculations have shown that for this PCW high transmission (>90%) through sharp corners can be obtained in a wide frequency range from 0.298 to 0.310 (omega alpha/2pi c) with the relative band gap of 4% when the dielectric contrast is 7.6:1. As far as we know, this result should be the widest frequency range with high transmission (>90%) in the waveguide of similar 2D triangular PhCs ever reported. We have also found that the specific holographic designs of PhC have strong influence on the resonance between the two waveguide bends, and thus this fact can be used as an effective means to improve the transmission property of 2D holographic PCW. In addition to the simplicity and low cost of holographic fabrication of PhCs, these features may reveal the possibly better guiding ability of holographic PCW than the conventional waveguide and the promising potential of the former in the application of photonic integrated circuits. PMID:18825173

  16. Image formation by and wave propagation in a photonic crystal

    NASA Astrophysics Data System (ADS)

    Parimi, Patanjali; Vodo, Plarenta; Wentao, Lu; di Gennaro, Emiliano; Sridhar, Srinivas

    2004-03-01

    Negative refraction and imaging by a flat slab of a material are two of the important consequences of lefthanded electromagnetism. In our recent work we have demonstrated negative refraction and imaging by photonic crystals in the microwave frequency range [1]. The details of image formation are intriguing and urge its investigation. We have carried out microwave measurements in a parallel plate waveguide made of a pair of metallic plates. The Photonic crystal is made of alumina rods arranged on a square lattice such that the electric field is parallel to the axis of the rods. The detector is a dipole antenna which is inserted into the waveguide from outside. HP 8510C network analyzer is used to measure the complex transmission coefficient . The intensity maps of vs. probe position are obtained by scanning the probe using an x-y robot, both inside and outside the crystal. The results suggest Bloch wave propagation inside the crystal and that the image formation requires a better understanding than a simple ray diagram following geometric optics. [1] P. V. Parimi et al., Nature, 426, 404 (2003).

  17. A naturally grown three-dimensional nonlinear photonic crystal

    NASA Astrophysics Data System (ADS)

    Xu, Tianxiang; Lu, Dazhi; Yu, Haohai; Zhang, Huaijin; Zhang, Yong; Wang, Jiyang

    2016-02-01

    Nonlinear frequency conversion via three-dimensional (3D) quasi-phase matching (QPM) process is experimentally realized based on a Ba0.77Ca0.23TiO3 (BCT) crystal. The ferroelectric domains in BCT crystal are observed, and the results reveal that the antiparallel domains distribute in three dimensions and can provide 3D reciprocal lattice vectors for QPM processes. Broadband petal-like second-harmonic patterns are achieved, which are well consistent with the theoretical quasi-cubic model of 3D nonlinear photonic crystals. Our work not only promotes the development of QPM technique but also builds a platform for 3D nonlinear optics and quantum optics.

  18. Two-photon excited UV fluorescence for protein crystal detection

    PubMed Central

    Madden, Jeremy T.; DeWalt, Emma L.; Simpson, Garth J.

    2011-01-01

    Two-photon excited ultraviolet fluorescence (TPE-UVF) microscopy is explored for sensitive protein-crystal detection as a complement to second-order nonlinear optical imaging of chiral crystals (SONICC). Like conventional ultraviolet fluorescence (UVF), TPE-UVF generates image contrast based on the intrinsic fluorescence of aromatic residues, generally producing higher fluorescence emission within crystals than the mother liquor by nature of the higher local protein concentration. However, TPE-UVF has several advantages over conventional UVF, including (i) insensitivity to optical scattering, allowing imaging in turbid matrices, (ii) direct compatibility with conventional optical plates and windows by using visible light for excitation, (iii) elimination of potentially damaging out-of-plane UV excitation, (iv) improved signal to noise through background reduction from out-of-plane excitation and (v) relatively simple integration into instrumentation developed for SONICC. PMID:21931215

  19. Photonic crystal enhanced light-trapping in thin film solar cells

    SciTech Connect

    Zhou, D.; Biswas, R.

    2008-03-01

    We utilize photonic crystals to simulate enhanced light-trapping in a-Si:H thin film solar cells. A one dimensional photonic crystal or distributed Bragg reflector with alternating dielectric layers acts as low loss backreflector. A two dimensional photonic crystal between the absorber layer and the Bragg reflector diffracts light at oblique angles within the absorber. The photonic crystal geometry is optimized to obtain maximum absorption. The photonic crystal provides lossless diffraction of photons, increasing the photon path length within the absorber layer. The simulation predicts significantly enhanced photon harvesting between 600 and 775?nm below the band edge, and an absorption increase by more than a factor of 10 near the band edge. The optical path length ratio can exceed the classical limit predicted for randomly roughened scattering surfaces at most wavelengths near the band edge. The optical modeling is performed with a rigorous scattering matrix approach where Maxwell's equations are solved in Fourier space.

  20. Tunable one-dimensional plasma photonic crystals in dielectric barrier discharge

    SciTech Connect

    Fan Weili; Dong Lifang

    2010-07-15

    A tunable one-dimensional plasma photonic crystal is obtained by using a dielectric barrier discharge with two liquid electrodes. It is formed by the self-organization of the filaments, rather than that in an artificial array of electrodes. The dispersion relations of the plasma photonic crystals are calculated by solving the Helmholtz equation using a method analogous to Kronig-Penney's problem. The photonic band diagrams of the plasma photonic crystals are studied when changing the filling factor, the lattice constant, and the electron density, based on the experimental results. The critical electron density is given, beyond which the plasma photonic crystal will have a remarkable band structure.

  1. High-efficiency photonic crystal narrowband thermal emitters

    NASA Astrophysics Data System (ADS)

    Farfan, G. B.; Su, M. F.; Reda Taha, M. M.; El-Kady, I.

    2010-02-01

    Photonic crystals (PhC) are artificial structures fabricated with a periodicity in the dielectric function. This periodic electromagnetic potential results in creation of energy bandgaps where photon propagation is prohibited. PhC structures have promising use in thermal applications if optimized to operate at specific thermal emission spectrum. Here, novel utilization of optimized PhC's in thermal applications is presented. We demonstrate through numerical simulation the modification of the thermal emission spectrum by a metallic photonic crystal (PhC) to create high-efficiency multispectral thermal emitters. These emitters funnel radiation from a broad emission spectrum associated with a Plancklike distribution into a prescribed narrow emission band. A detailed quantitative evaluation of the spectral and power efficiencies of a PhC thermal emitter and its portability across infrared (IR) spectral bands are provided. We show an optimized tungsten PhC with a predominant narrow-band emission profile with an emitter efficiency that is more than double that of an ideal blackbody and ~65-75% more power-efficiency across the IR spectrum. We also report on using optimal three-dimensional Lincoln log photonic crystal (LL-PhC) emitters for thermophotovoltaic (TPV) generation as opposed to using a passive filtering approach to truncate the broadband thermal source emission to match the bandgap of a photovoltaic (PV) cell. The emitter performance is optimized for the 1-2μm PV band using different PhC materials, specifically copper, silver and gold. The use of the proposed PhC in TPV devices can produce significant energy savings not reported before. The optimal design of the PhC geometry is obtained by implementing a variety of optimization methods integrated with artificial intelligence (AI) algorithms.

  2. Criteria of backscattering in chiral one-way photonic crystals

    NASA Astrophysics Data System (ADS)

    Cheng, Pi-Ju; Chang, Shu-Wei

    2016-03-01

    Optical isolators are important devices in photonic circuits. To reduce the unwanted reflection in a robust manner, several setups have been realized using nonreciprocal schemes. In this study, we show that the propagating modes in a strongly-guided chiral photonic crystal (no breaking of the reciprocity) are not backscattering-immune even though they are indeed insensitive to many types of scatters. Without the protection from the nonreciprocity, the backscattering occurs under certain circumstances. We present a perturbative method to calculate the backscattering of chiral photonic crystals in the presence of chiral/achiral scatters. The model is, essentially, a simplified analogy to the first-order Born approximation. Under reasonable assumptions based on the behaviors of chiral photonic modes, we obtained the expression of reflection coefficients which provides criteria for the prominent backscattering in such chiral structures. Numerical examinations using the finite-element method were also performed and the results agree well with the theoretical prediction. From both our theory and numerical calculations, we find that the amount of backscattering critically depends on the symmetry of scatter cross sections. Strong reflection takes place when the azimuthal Fourier components of scatter cross sections have an order l of 2. Chiral scatters without these Fourier components would not efficiently reflect the chiral photonic modes. In addition, for these chiral propagating modes, disturbances at the most significant parts of field profiles do not necessarily result in the most effective backscattering. The observation also reveals what types of scatters or defects should be avoided in one-way applications of chiral structures in order to minimize the backscattering.

  3. Electrically tunable zero dispersion wavelengths in photonic crystal fibers filled with a dual frequency addressable liquid crystal

    SciTech Connect

    Wahle, Markus Kitzerow, Heinz-Siegfried

    2015-11-16

    We present a liquid crystal (LC) infiltrated photonic crystal fiber, which enables the electrical tuning of the position of zero dispersion wavelengths (ZDWs). A dual frequency addressable liquid crystal is aligned perpendicular on the inclusion walls of a photonic crystal fiber, which results in an escaped radial director field. The orientation of the LC is controlled by applying an external electric field. Due to the high index of the liquid crystal the fiber guides light by the photonic band gap effect. Multiple ZDWs exist in the visible and near infrared. The positions of the ZDWs can be either blue or red shifted depending on the frequency of the applied voltage.

  4. Electrically tunable zero dispersion wavelengths in photonic crystal fibers filled with a dual frequency addressable liquid crystal

    NASA Astrophysics Data System (ADS)

    Wahle, Markus; Kitzerow, Heinz-Siegfried

    2015-11-01

    We present a liquid crystal (LC) infiltrated photonic crystal fiber, which enables the electrical tuning of the position of zero dispersion wavelengths (ZDWs). A dual frequency addressable liquid crystal is aligned perpendicular on the inclusion walls of a photonic crystal fiber, which results in an escaped radial director field. The orientation of the LC is controlled by applying an external electric field. Due to the high index of the liquid crystal the fiber guides light by the photonic band gap effect. Multiple ZDWs exist in the visible and near infrared. The positions of the ZDWs can be either blue or red shifted depending on the frequency of the applied voltage.

  5. Modification of Thermal Emission via Metallic Photonic Crystals

    SciTech Connect

    Norris, David J.; Stein, Andreas; George, Steven M.

    2012-07-30

    Photonic crystals are materials that are periodically structured on an optical length scale. It was previously demonstrated that the glow, or thermal emission, of tungsten photonic crystals that have a specific structure - known as the 'woodpile structure' - could be modified to reduce the amount of infrared radiation from the material. This ability has implications for improving the efficiency of thermal emission sources and for thermophotovoltaic devices. The study of this effect had been limited because the fabrication of metallic woodpile structures had previously required a complex fabrication process. In this project we pursued several approaches to simplify the fabrication of metallic photonic crystals that are useful for modification of thermal emission. First, we used the self-assembly of micrometer-scale spheres into colloidal crystals known as synthetic opals. These opals can then be infiltrated with a metal and the spheres removed to obtain a structure, known as an inverse opal, in which a three-dimensional array of bubbles is embedded in a film. Second, we used direct laser writing, in which the focus of an infrared laser is moved through a thin film of photoresist to form lines by multiphoton polymerization. Proper layering of such lines can lead to a scaffold with the woodpile structure, which can be coated with a refractory metal. Third, we explored a completely new approach to modified thermal emission - thin metal foils that contain a simple periodic surface pattern, as shown in Fig. 1. When such a foil is heated, surface plasmons are excited that propagate along the metal interface. If these waves strike the pattern, they can be converted into thermal emission with specific properties.

  6. Wavelength interleaver in a two-dimensional rod-type photonic crystal

    NASA Astrophysics Data System (ADS)

    Ni, Bo; Li, Hui; Qiu, Yishen; Jiang, Junzhen; Wang, Yufei; Lin, Guimin; Bai, Jibo; Hong, Hailian; Chen, Xiyao

    2008-11-01

    A theoretical model of wavelength interleaver, which is based on an asymmetric Mach-Zehnder interferometer (AMZI) constructed in a two-dimensional photonic crystal (2D PhC), is proposed and numerically demonstrated. The 2D PhC consists of a square lattice of dielectric cylindrical rods in air. The AMZI includes two mirrors and two splitters. Light propagates between them employing self-collimation effect. The two interferometer branches have different path lengths. By using the finite-difference time-domain method, the calculation results show that the transmission spectra at two AMZI output ports are in the shape of sinusoidal curves and have a uniform peak spacing in the frequency range from 0.191c/a to 0.200c/a. When the path length of the longer branch is increased and the shorter one is fixed, the peaks shift to the lower frequencies and the peak spacing decreases nonlinearly. Consequently, the transmission can be designed to meet various application demands by changing the length difference between the two branches. For the dimensions of the wavelength interleaver are about tens of central wavelengths, it may be applied in future photonic integrated circuits.

  7. Hyperspectral optical near-field imaging: Looking graded photonic crystals and photonic metamaterials in color

    NASA Astrophysics Data System (ADS)

    Dellinger, Jean; Van Do, K.; Le Roux, Xavier; de Fornel, Frédérique; Cassan, Eric; Cluzel, Benoît

    2012-10-01

    Using a scanning near-field optical microscope operating with a hyperspectral detection scheme, we report the direct observation of the mirage effect within an on-chip integrated artificial material made of a two dimensional graded photonic crystal. The light rainbow due to the material dispersion is quantified experimentally and quantitatively compared to three dimensional plane wave assisted Hamiltonian optics predictions of light propagation.

  8. Tuning of full band gap in anisotropic photonic crystal slabs using a liquid crystal

    NASA Astrophysics Data System (ADS)

    Khalkhali, T. Fathollahi; Rezaei, B.; Ramezani, A. H.

    2012-11-01

    We analyze the tunability of full band gap in photonic crystal slabs created by square and triangular lattices of air holes in anisotropic tellurium background, considering that the regions above and below the slab are occupied by SiO2 and the holes are infiltrated with liquid crystals. Using the supercell method based on plane wave expansion, we study the variation of full band gap by changing the optical axis orientation of liquid crystal. Our results demonstrate the existence and remarkable tunability of full band gap in both square and triangular lattices, largest band gap and tunability being obtained for the triangular lattice.

  9. Spatial Resolution and Refractive Index Contrast of Resonant Photonic Crystal Surfaces for Biosensing

    PubMed Central

    Triggs, G. J.; Fischer, M.; Stellinga, D.; Scullion, M. G.; Evans, G. J. O.; Krauss, T. F.

    2015-01-01

    By depositing a resolution test pattern on top of a Si3N4 photonic crystal resonant surface, we have measured the dependence of spatial resolution on refractive index contrast Δn. Our experimental results and finite-difference time-domain (FDTD) simulations at different refractive index contrasts show that the spatial resolution of our device reduces with reduced contrast, which is an important consideration in biosensing, where the contrast may be of order 10−2. We also compare 1-D and 2-D gratings, taking into account different incidence polarizations, leading to a better understanding of the excitation and propagation of the resonant modes in these structures, as well as how this contributes to the spatial resolution. At Δn = 0.077, we observe resolutions of 2 and 6 μm parallel to and perpendicular to the grooves of a 1-D grating, respectively, and show that for polarized illumination of a 2-D grating, resolution remains asymmetrical. Illumination of a 2-D grating at 45° results in symmetric resolution. At very low index contrast, the resolution worsens dramatically, particularly for Δn < 0.01, where we observe a resolution exceeding 10 μm for our device. In addition, we measure a reduction in the resonance linewidth as the index contrast becomes lower, corresponding to a longer resonant mode propagation length in the structure and contributing to the change in spatial resolution. PMID:26356353

  10. Development of High-Density Plasma Photonic Crystals Using High-Power Lasers

    NASA Astrophysics Data System (ADS)

    Colon Quinones, Roberto; Wang, Benjamin; Lucca Fabris, Andrea; Cappelli, Mark

    2015-09-01

    A plasma photonic crystal (PPC) is an array of plasma structures that interacts with electromagnetic (EM) waves in ways not possible with natural materials. 2D PPCs can be used for generating a band gap, which is a range of wave frequencies in which no waves are transmitted through the structure. Such gap forms when an EM wave travels through a 2D PPC with spacing equal to half the wavelength of the wave and plasma frequency (ωp) on the order of the frequency of the wave. Until recently, research on PPCs has been limited to ωp < 30 GHz, which is equivalent to a plasma density of ne <1013 cm-3 . Over the last year, PPCs of ne >1015 cm-3 have been generated at Stanford through the use of high-power lasers. The PPCs are generated by expanding the laser beam from a Q-switched Nd:YAG laser through a Galilean beam expander and subsequently focusing the beam through an optical micro-lens array. The intense photoionization of air that occurs at the focus of the individual lenses leads to the formation of a 2D array of very dense plasma spots. Photomultiplier measurements show a plasma lifetime of ~150 ns during which the plasma array functions as a PPC, representing a first step towards advancing the field forward into the low THz regime. Sponsored by the AFOSR MURI and DoD NDSEG.

  11. DNA- and AC electric field-assisted assembly of two-dimensional colloidal photonic crystals and their controlled defect insertion

    NASA Astrophysics Data System (ADS)

    Kim, Sejong

    Photonic crystals (PC) are structures in which the refractive index is a periodic function in space. The ability of photonic crystals to localize and manipulate electromagnetic waves has attracted considerable attention from the scientific community. The self-assembly of monodisperse micrometer scale colloidal spheres into hexagonal closed-packed colloidal crystals provides a simple, fast, and cheap materials chemistry approach to PCs. Employing DNA supramolecular recognition, 2-dimensional (2D) photonic crystal monolayer was fabricated with monodisperse polystyrene colloidal microspheres. Amine-terminated DNA oligomers were covalently attached onto carboxy-decorated microspheres and enabled their DNA-functionalization while preserving their colloidal stability and organization properties. Following a capillary-force-assisted organization of DNA-decorated microspheres into close-packed 2D opaline arrays, the first monolayer was immobilized by DNA hybridization. Insertion of vacancies at predetermined sites within the lattice of colloidal crystals is a prerequisite in order to realize high-quality, opaline-based photonic devices. The previously obtained DNA-hybridization type binding of 2D-opaline arrays provides a heat-sensitive "adhesive" between substrate and microspheres within a surrounding aqueous medium that enables tuning the hybridization strength of DNA linker as well as a mechanism to facilitate the removal of unbound microspheres. Focusing a laser beam onto a single microsphere of the opaline array induces localized heating that enables the microsphere to detach, leaving behind vacancies. By repeating this process, line vacancies were successfully obtained. The effects of salt concentration, laser power, light-absorbing dyes, DNA length and refractive index mismatch were investigated and found to correlate with heat-induced DNA dehybridization. In addition, AC (alternating current) electrokinetic force was also utilized to obtain assembly of colloidal

  12. Theoretical modelling of one dimensional photonic crystal based optical demultiplexer

    NASA Astrophysics Data System (ADS)

    Sharma, Gaurav; Kumar, Sushil; Prasad, Surendra; Singh, Vivek

    2016-05-01

    An optical demultiplexer through one-dimensional Si-SiO2 photonic crystal structure in the presence of air cavity with a single crystal PMN-0.38PT material is presented. The transmittance of this structure is obtained using the transfer matrix method. The transmittance of this structure shows a sharp passband in the band gap region. It is observed that by introducing PMN-0.38PT layer in both sides of the air cavity, the existing band gap region of Si-SiO2 structure is slightly increased. Here, PMN-0.38PT material is working as a tunable element for passband. By applying some external potential on PMN-0.38PT crystal, the thickness of cavity layer can be tuned and the passband can be placed at any desired wavelength in the band gap region. Since the photonic band gap region contains a range of wavelengths which are not allowed to pass through the structure can be considered as a multiplex signal for the proposed demultiplexer. Therefore, any optical signal that lies in the band gap region of the structure can be separated into its components as a pass band. Hence, the proposed structure will work as an optical demultiplexer.

  13. Optical diode made from a moving photonic crystal.

    PubMed

    Wang, Da-Wei; Zhou, Hai-Tao; Guo, Miao-Jun; Zhang, Jun-Xiang; Evers, Jörg; Zhu, Shi-Yao

    2013-03-01

    Optical diodes controlling the flow of light are of principal significance for optical information processing. They transmit light from an input to an output, but not in the reverse direction. This breaking of time reversal symmetry is conventionally achieved via Faraday or nonlinear effects. For applications in a quantum network, features such as the abilities of all-optical control, on-chip integration, and single-photon operation are important. Here we propose an all-optical optical diode which requires neither magnetic fields nor strong input fields. It is based on a "moving" photonic crystal generated in a three-level electromagnetically induced transparency medium in which the refractive index of a weak probe is modulated by the moving periodic intensity of a strong standing coupling field with two detuned counterpropagating components. Because of the Doppler effect, the frequency range of the crystal's band gap for the probe copropagating with the moving crystal is shifted from that for the counterpropagating probe. This mechanism is experimentally demonstrated in a room temperature Cs vapor cell. PMID:23496710

  14. Light harvesting in photonic crystals revisited: why do slow photons at the blue edge enhance absorption?

    PubMed

    Deparis, O; Mouchet, S R; Su, B-L

    2015-11-11

    Light harvesting enhancement by slow photons in photonic crystal catalysts or dye-sensitized solar cells is a promising approach for increasing the efficiency of photoreactions. This structural effect is exploited in inverse opal TiO2 photocatalysts by tuning the red edge of the photonic band gap to the TiO2 electronic excitation band edge. In spite of many experimental demonstrations, the slow photon effect is not fully understood yet. In particular, observed enhancement by tuning the blue edge has remained unexplained. Based on rigorous couple wave analysis simulations, we quantify light harvesting enhancement in terms of absorption increase at a specific wavelength (monochromatic UV illumination) or photocurrent increase (solar light illumination), with respect to homogeneous flat slab of equivalent material thickness. We show that the commonly accepted explanation relying on light intensity confinement in high (low) dielectric constant regions at the red (blue) edge is challenged in the case of TiO2 inverse opals because of the sub-wavelength size of the material skeleton. The reason why slow photons at the blue edge are also able to enhance light harvesting is the loose confinement of the field, which leads to significant resonantly enhanced field intensity overlap with the skeleton in both red and blue edge tuning cases, yet with different intensity patterns. PMID:26517229

  15. Optically Induced Indirect Photonic Transitions in a Slow Light Photonic Crystal Waveguide

    NASA Astrophysics Data System (ADS)

    Castellanos Muñoz, Michel; Petrov, Alexander Yu.; O'Faolain, Liam; Li, Juntao; Krauss, Thomas F.; Eich, Manfred

    2014-02-01

    We demonstrate indirect photonic transitions in a silicon slow light photonic crystal waveguide. The transitions are driven by an optically generated refractive index front that moves along the waveguide and interacts with a signal pulse copropagating in the structure. We experimentally confirm a theoretical model which indicates that the ratio of the frequency and wave vector shifts associated with the indirect photonic transition is identical to the propagation velocity of the refractive index front. The physical origin of the transitions achieved here is fundamentally different than in previously proposed refractive index modulation concepts with fixed temporal and spatial modulation frequencies; as here, the interaction with the refractive index front results in a Doppler-like signal frequency and wave vector shift. Consequently, the bandwidth over which perfect mode frequency and wave vector matching is achieved is not intrinsically limited by the shape of the photonic bands, and tuning of the indirect photonic transitions is possible without any need for geometrical modifications of the structure. Our device is genuinely nonreciprocal, as it provides different frequency shifts for co- and counterpropagating signal and index fronts.

  16. Waveguide-integrated photonic crystal spectrometer with camera readout

    SciTech Connect

    Meng, Fan; Shiue, Ren-Jye; Li, Luozhou; Nie, Jing; Harris, Nicholas C.; Chen, Edward H.; Schröder, Tim; Englund, Dirk; Wan, Noel; Pervez, Nadia; Kymissis, Ioannis

    2014-08-04

    We demonstrate an infrared spectrometer based on waveguide-coupled nanocavity filters in a planar photonic crystal structure. The input light is coupled into the waveguide, from which spectral components are dropped into the cavities and radiated off-chip for detection on a commercial InGaAs camera. The spectrometer has a footprint of only 60 μm by 8 μm. The spectral resolution is about 1 nm in the operation bandwidth of 1522–1545 nm. By substituting the membrane material and structure parameters, this design can be easily extended into the visible regime and developed for a variety of highly efficient, miniature photonic applications.

  17. Strong optomechanical interactions in a sliced photonic crystal nanobeam

    PubMed Central

    Leijssen, Rick; Verhagen, Ewold

    2015-01-01

    Coupling between mechanical and optical degrees of freedom is strongly enhanced by using subwavelength optical mode profiles. We realize an optomechanical system based on a sliced photonic crystal nanobeam, which combines such highly confined optical fields with a low-mass mechanical mode. Analyzing the transduction of motion and effects of radiation pressure we find the system exhibits a photon-phonon coupling rate g0 /2π ≈ 11.5 MHz, exceeding previously reported values by an order of magnitude. We show that the large optomechanical interaction enables detecting thermal motion with detection noise below that at the standard quantum limit, even in broad bandwidth devices, important for both sensor applications as well as measurement-based quantum control. PMID:26522751

  18. Introducing Defects in Photonic Band-Gap (PBG) Crystals

    SciTech Connect

    Johnson, Elliott C.; /North Dakota State U. /SLAC

    2007-11-07

    Photonic Band-Gap (PBG) fibers are a periodic array of optical materials arranged in a lattice called a photonic crystal. The use of PBG fibers for particle acceleration is being studied by the Advanced Accelerator Research Department (AARD) at SLAC. By introducing defects in such fibers, e.g. removing one or more capillaries from a hexagonal lattice, spatially confined modes suitable for particle acceleration may be created. The AARD has acquired several test samples of PBG fiber arrays with varying refractive index, capillary size, and length from an external vendor for testing. The PBGs were inspected with a microscope and characteristics of the capillaries including radii, spacing, and errors in construction were determined. Transmission tests were performed on these samples using a broad-range spectrophotometer. In addition, detailed E-field simulations of different PBG configurations were done using the CUDOS and RSOFT codes. Several accelerating modes for different configurations were found and studied in detail.

  19. Integrable microwave filter based on a photonic crystal delay line

    NASA Astrophysics Data System (ADS)

    Sancho, Juan; Bourderionnet, Jerome; Lloret, Juan; Combrié, Sylvain; Gasulla, Ivana; Xavier, Stephane; Sales, Salvador; Colman, Pierre; Lehoucq, Gaelle; Dolfi, Daniel; Capmany, José; de Rossi, Alfredo

    2012-09-01

    The availability of a tunable delay line with a chip-size footprint is a crucial step towards the full implementation of integrated microwave photonic signal processors. Achieving a large and tunable group delay on a millimetre-sized chip is not trivial. Slow light concepts are an appropriate solution, if propagation losses are kept acceptable. Here we use a low-loss 1.5 mm-long photonic crystal waveguide to demonstrate both notch and band-pass microwave filters that can be tuned over the 0-50-GHz spectral band. The waveguide is capable of generating a controllable delay with limited signal attenuation (total insertion loss below 10 dB when the delay is below 70 ps) and degradation. Owing to the very small footprint of the delay line, a fully integrated device is feasible, also featuring more complex and elaborate filter functions.

  20. Liquid-core, liquid-cladding photonic crystal fibers.

    PubMed

    De Matos, Christiano J; Cordeiro, Cristiano M B; Dos Santos, Eliane M; Ong, Jackson S; Bozolan, Alexandre; Brito Cruz, Carlos H

    2007-09-01

    We experimentally demonstrate a simple and novel technique to simultaneously insert a liquid into the core of a hollow-core photonic crystal fiber (PCF) and a different liquid into its cladding. The result is a liquid-core, liquid-cladding waveguide in which the two liquids can be selected to yield specific guidance characteristics. As an example, we tuned the core-cladding index difference by proper choice of the inserted liquids to obtain control over the number of guided modes. Single-mode guidance was achieved for a particular choice of liquids. We also experimentally and theoretically investigated the nature of light confinement and observed the transition from photonic bandgap to total internal reflection guidance both with the core-cladding index contrast and with the PCF length. PMID:19547475