Science.gov

Sample records for 4th regular inspection

  1. Regularization approach for tomosynthesis X-ray inspection

    NASA Astrophysics Data System (ADS)

    Tigkos, Konstantinos; Hassler, Ulf; Holub, Wolfgang; Woerlein, Norbert; Rehak, Markus

    2014-02-01

    X-ray inspection is intended to be used as an escalation technique for inspection of carbon fiber reinforced plastics (CFRP) in aerospace applications, especially in case of unclear indications from ultrasonic or other NDT modalities. Due to their large dimensions, most aerospace components cannot be scanned by conventional computed tomography. In such cases, X-ray Laminography may be applied, allowing a pseudo 3D slice-by-slice reconstruction of the sample with Tomosynthesis. However, due to the limited angle acquisition geometry, reconstruction artifacts arise, especially at surfaces parallel to the imaging plane. To regularize the Tomosynthesis approach, we propose an additional prescan of the object to detect outer sample surfaces. We recommend the use of contrasted markers which are temporarily attached to the sample surfaces. The depth position of the markers is then derived from that prescan. As long as the sample surface remains simple, few markers are required to fit the respective object surfaces. The knowledge about this surface may then be used to regularize the final Tomosynthesis reconstruction, performed with markerless projections. Eventually, it can also serve as prior information for an ART reconstruction or to register a CAD model of the sample. The presented work is carried out within the European FP7 project QUICOM. We demonstrate the proposed approach within a simulation study applying an acquisition geometry suited for CFRP part inspection. A practical verification of the approach is planned later in the project.

  2. Regularization approach for tomosynthesis X-ray inspection

    SciTech Connect

    Tigkos, Konstantinos; Hassler, Ulf; Holub, Wolfgang; Woerlein, Norbert; Rehak, Markus

    2014-02-18

    X-ray inspection is intended to be used as an escalation technique for inspection of carbon fiber reinforced plastics (CFRP) in aerospace applications, especially in case of unclear indications from ultrasonic or other NDT modalities. Due to their large dimensions, most aerospace components cannot be scanned by conventional computed tomography. In such cases, X-ray Laminography may be applied, allowing a pseudo 3D slice-by-slice reconstruction of the sample with Tomosynthesis. However, due to the limited angle acquisition geometry, reconstruction artifacts arise, especially at surfaces parallel to the imaging plane. To regularize the Tomosynthesis approach, we propose an additional prescan of the object to detect outer sample surfaces. We recommend the use of contrasted markers which are temporarily attached to the sample surfaces. The depth position of the markers is then derived from that prescan. As long as the sample surface remains simple, few markers are required to fit the respective object surfaces. The knowledge about this surface may then be used to regularize the final Tomosynthesis reconstruction, performed with markerless projections. Eventually, it can also serve as prior information for an ART reconstruction or to register a CAD model of the sample. The presented work is carried out within the European FP7 project QUICOM. We demonstrate the proposed approach within a simulation study applying an acquisition geometry suited for CFRP part inspection. A practical verification of the approach is planned later in the project.

  3. Social dimensions of inclusion in education of 4th and 7th grade pupils in inclusive and regular classes: Outcomes from Austria.

    PubMed

    Schwab, Susanne

    2015-01-01

    Positive peer relationships play a significant role in the development of students. They are beneficial for learning and psychological outcomes. This article draws upon an important distinction between the four main themes of social participation (friendships, interactions, peer acceptance and self-perception of social participation) and examines these aspects in inclusive and regular classes. Especially, differences in social participation of students with and without special educational needs (SEN) in inclusive classes and between students without SEN in inclusive and regular classes are examined. In this study, data from 1115 pupils in primary and secondary schools in Austria were analysed, of which 129 were diagnosed as having SEN. The results showed that in inclusive classes, students with SEN had lower scores on all four subthemes of social participation (friendships, interactions, peer acceptance and self-perception of social integration) than students without SEN. Regarding students without SEN, friendships and peer acceptance were significantly higher in inclusive classes than in regular classes. Differences were neither found for gender, nor between primary and secondary school students. PMID:26159883

  4. The 4th Thermodynamic Principle?

    SciTech Connect

    Montero Garcia, Jose de la Luz; Novoa Blanco, Jesus Francisco

    2007-04-28

    It should be emphasized that the 4th Principle above formulated is a thermodynamic principle and, at the same time, is mechanical-quantum and relativist, as it should inevitably be and its absence has been one of main the theoretical limitations of the physical theory until today.We show that the theoretical discovery of Dimensional Primitive Octet of Matter, the 4th Thermodynamic Principle, the Quantum Hexet of Matter, the Global Hexagonal Subsystem of Fundamental Constants of Energy and the Measurement or Connected Global Scale or Universal Existential Interval of the Matter is that it is possible to be arrived at a global formulation of the four 'forces' or fundamental interactions of nature. The Einstein's golden dream is possible.

  5. 24 CFR 15.102 - Where and when may I inspect and copy records that FOIA requires HUD to make regularly available...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... copy records that FOIA requires HUD to make regularly available to the public? 15.102 Section 15.102... HUD EMPLOYEES FOIA Disclosure of Information § 15.102 Where and when may I inspect and copy records that FOIA requires HUD to make regularly available to the public? (a) You may inspect and copy...

  6. 17. 4th floor roof, view south, 4th and 5th floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. 4th floor roof, view south, 4th and 5th floor setback to left and atrium structure to right - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  7. 4th International Plant Biomechanics Conference Proceedings (Abstracts)

    SciTech Connect

    Frank W. Telewski; Lothar H. Koehler; Frank W. Ewers

    2003-07-20

    The 4th International Plant Biomechanics Conference facilitated an interdisciplinary exchange between scientists, engineers, and educators addressing the major questions encountered in the field of Plant Biomechanics. Subjects covered by the conference include: Evolution; Ecology; Mechanoreception; Cell Walls; Genetic Modification; Applied Biomechanics of Whole Plants, Plant Products, Fibers & Composites; Fluid Dynamics; Wood & Trees; Fracture Mechanics; Xylem Pressure & Water Transport; Modeling; and Introducing Plant Biomechanics in Secondary School Education.

  8. Bifrost: A 4th Generation Launch Architecture Concept

    NASA Astrophysics Data System (ADS)

    Rohrschneider, R. R.; Young, D.; St.Germain, B.; Brown, N.; Crowley, J.; Maatsch, J.; Olds, J. R.

    2002-01-01

    A 4th generation launch architecture is studied for the purpose of drastically reducing launch costs and hence enabling new large mass missions such as space solar power and human exploration of other planets. The architecture consists of a magnetic levitation launch tube placed on the equator with the exit end elevated to approximately 20 km. Several modules exist for sending manned and unmanned payloads into Earth orbit. Analysis of the launch tube operations, launch trajectories, module aerodynamics, propulsion modules, and system costs are presented. Using the hybrid logistics module, it is possible to place payloads into low Earth orbit for just over 100 per lb.

  9. A 95 GHz, 4th harmonic gyro-oscillator

    SciTech Connect

    Hargreaves, T.A.; Scheitrum, G.P.; Bemis, T.; Higgins, L.

    1994-12-31

    There is currently an interest in medium power ({approximately}100 kW), compact 95 GHz amplifiers for future radar applications. Size, weight, and efficiency are critical for airborne applications. Litton has been investigating a 4th harmonic, 4-cavity gyro-amplifier. The key to success of the amplifier is the axis-encircling electron beam from a new type of electron gun, the advanced center post (ACP) gun. Gun simulations incorporating the actual magnetic field and thermal velocity spread in the emitted electrons show that axial velocity spreads of less than 2% are attainable, which is significantly better than other gun concepts. The amplifier utilizes coaxial-magnetron-type cavities operating in the {pi} mode. In this cavity, vanes extend nearly down to the electron beam`s outside diameter. The majority of the RF stored energy in the system is in the coaxial cavity, so that the resonant frequency and quality factor of each coaxial magnetron cavity may be adjusted by varying only the coaxial cavity. Several components are being tested individually. To test the cavity design, a 4th harmonic oscillator based on a coaxial magnetron cavity has been designed. Results of the oscillator testing will be presented.

  10. Special Issue: 4th International Workshop on Space Radiation (IWSRR)

    NASA Technical Reports Server (NTRS)

    Cucinotta, Francis A.

    2007-01-01

    This special issue of the journal "Radiation and Environmental Biophysics" contains 20 peer-reviewed papers contributed by leading space radiation researcher's world-wide attending the 4th IWSRR. Manuscripts cover a broad range of topics ranging from radiation environments and transport in shielding and planetary surfaces to new results in understanding the biological effects of protons and high-charge and energy (HZE) nuclei on the risk of cancer, and degenerative diseases such as central nervous system effects, heart disease, and cataracts. The issue provides a snapshot of the state-of-the-art of the research in this field, demonstrating both the important results gathered in the past few years with experiments at accelerators, and the need for more research to quantify the risk and develop countermeasures.

  11. [Time--the 4th dimision in medicine and psychotherapy].

    PubMed

    Bergmann, Günther

    2003-01-01

    Time is presented as well in his historical meaning and as 4th dimension in its medical and psychotherapeutic context. In this medical and psychotherapeutic process it has an important function and is a variable of a process procedure. The difference between "kairos" = (the right point of time) and "chronos" = (the period of time) is historically meanful. The subjective experienced time is as well emphasized by the development of time in the relation to the development of the "self" as in the subjective experience of time in medical and psychotherapeutic situations. There are also changed conceptions and understandings of time running parallel to the development of nature sciences. The importance of time is explained for the medical practice and the meeting with the patient--especially for chronic diseases. The connection of confidence and time is particularly emphasized in the systemic approach. PMID:12764877

  12. European Code against Cancer 4th Edition: Breastfeeding and cancer.

    PubMed

    Scoccianti, Chiara; Key, Timothy J; Anderson, Annie S; Armaroli, Paola; Berrino, Franco; Cecchini, Michele; Boutron-Ruault, Marie-Christine; Leitzmann, Michael; Norat, Teresa; Powers, Hilary; Schüz, Joachim; Wiseman, Martin; Romieu, Isabelle

    2015-12-01

    Breast cancer is the most frequent cancer in women, and incidence rates have been rising in European Union (EU) countries over recent decades due in part to a sharp decline in breastfeeding practices. Evidence for a protective association between breastfeeding and the risk of breast cancer at all ages is convincing, and modest protective relationships between breastfeeding and the risk of endometrial and ovarian cancers have been suggested. The reduction in breast cancer risk is estimated at 2% for an increase of 5 months of lifetime breastfeeding. The longer women breastfeed, the more they are protected against breast cancer. In addition, breastfeeding is associated with several health benefits for both the mother and the breastfed child. Taking all this evidence into account, the 4th edition of the European Code against Cancer recommends: "Breastfeeding reduces the mother's cancer risk. If you can, breastfeed your baby". PMID:26116994

  13. The Epilepsy Foundation's 4th Biennial Epilepsy Pipeline Update Conference.

    PubMed

    French, Jacqueline A; Schachter, Steven C; Sirven, Joseph; Porter, Roger

    2015-05-01

    On June 5 and 6, 2014, the Epilepsy Foundation held its 4th Biennial Epilepsy Pipeline Update Conference, an initiative of the Epilepsy Therapy Project, which showcased the most promising epilepsy innovations from health-care companies and academic laboratories dedicated to pioneering and advancing drugs, biologics, technologies, devices, and diagnostics for epilepsy. Speakers and attendees included emerging biotech and medical technology companies, major pharmaceutical and device companies, as well as investigators and innovators at the cutting-edge of epilepsy. The program included panel discussions on collaboration between small and large companies, how to get products in need of funding to the marketplace, who is currently funding epilepsy and CNS innovation, and how the NIH facilitates early-stage drug development. Finally, the conference featured the third annual "Shark Tank" competition. The presentations are summarized in this paper, which is followed by a compilation of the meeting poster abstracts. PMID:25922152

  14. 76 FR 37649 - Safety Zone; Northern California Annual Fireworks Events, July 4th Fireworks Display

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-28

    ... SECURITY Coast Guard 33 CFR Part 165 Safety Zone; Northern California Annual Fireworks Events, July 4th Fireworks Display AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce safety zone for the annual July 4th Fireworks Display (Tahoe City 4th of...

  15. 77 FR 39172 - Safety Zone: Skagway Harbor, Skagway, AK for 4th of July Fireworks

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-02

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone: Skagway Harbor, Skagway, AK for 4th of July... 4th of July Fireworks display. Persons desiring to transit within this safety zone must contact the... Inlet for the City of Skagway, Alaska, sponsored 4th of July fireworks display. A no-action...

  16. PREFACE: 4th International Symposium on Functional Materials (ISFM2011)

    NASA Astrophysics Data System (ADS)

    Yin, Shu; Sekino, Tohru; Tanaka, Shun-ichiro; Sato, Tsugio; Lu, Li; Xue, Dongfeng

    2012-01-01

    The 4th International Symposium on Functional Materials (ISFM2011) was held in Sendai, Japan, on 2-6 August 2011. This Special Issue of Journal of Physics: Conference Series (JPCS) consists of partial manuscripts which were presented at ISFM2011. Advanced materials have experienced a dramatic increase in demand for research, development and applications. The aim of the International Symposium on Functional Materials (ISFM) was to provide an overview of the present status with historical background and to foresee future trends in the field of functional materials. The 4th symposium, ISFM 2011, covered a wide variety of topics within state-of-the-art advanced materials science and technology, and focused especially on four major categories including: Environmental Materials, Electronic Materials, Energy Materials and Biomedical Materials. As you know, a massive earthquake and the Tsunami that followed occurred near the Tohoku region on 11 March 2011. After the earthquake, although there were many difficulties in continuing to organize the symposium, we received warm encouragement from many researchers and societies, especially from the members of the International Advisory Committee and Organizing Committee, so that ISFM2011 could be held on schedule. We are honored that ISFM2011 was the first formal international academic conference held in the Tohoku area of Japan after the 11 March earthquake. About 140 participants from 14 countries took part in the ISFM2011 symposium, which included five plenary talks by world-leading scientists, 32 invited talks, and many oral and poster presentations. We are delighted to see that many researchers are interested in the synthesis and the properties as well as the applications of functional materials. Many fruitful and exciting research achievements were presented in the symposium. We believe that this symposium provided a good chance for scientists to communicate and exchange opinions with each other. We would also like to

  17. Managing haemophilia for life: 4th Haemophilia Global Summit.

    PubMed

    Astermark, J; Dolan, G; Hilberg, T; Jiménez-Yuste, V; Laffan, M; Lassila, R; Lobet, S; Martinoli, C; Perno, C-F

    2014-07-01

    The 4th Haemophilia Global Summit was held in Potsdam, Germany, in September 2013 and brought together an international faculty of haemophilia experts and delegates from multidisciplinary backgrounds. The programme was designed by an independent Scientific Steering Committee of haemophilia experts and explored global perspectives in haemophilia care, discussing practical approaches to the optimal management of haemophilia now and in the future. The topics outlined in this supplement were selected by the Scientific Steering Committee for their relevance and potential to influence haemophilia care globally. In this supplement from the meeting, Jan Astermark reviews current understanding of risk factors for the development of inhibitory antibodies and discusses whether this risk can be modulated and minimized. Factors key to the improvement of joint health in people with haemophilia are explored, with Carlo Martinoli and Víctor Jiménez-Yuste discussing the utility of ultrasound for the early detection of haemophilic arthropathy. Other aspects of care necessary for the prevention and management of joint disease in people with haemophilia are outlined by Thomas Hilberg and Sébastian Lobet, who highlight the therapeutic benefits of physiotherapy and sports therapy. Riitta Lassila and Carlo-Federico Perno describe current knowledge surrounding the risk of transmission of infectious agents via clotting factor concentrates. Finally, different types of extended half-life technology are evaluated by Mike Laffan, with a focus on the practicalities and challenges associated with these products. PMID:24924596

  18. European Code against Cancer 4th Edition: Diet and cancer.

    PubMed

    Norat, Teresa; Scoccianti, Chiara; Boutron-Ruault, Marie-Christine; Anderson, Annie; Berrino, Franco; Cecchini, Michele; Espina, Carolina; Key, Tim; Leitzmann, Michael; Powers, Hilary; Wiseman, Martin; Romieu, Isabelle

    2015-12-01

    Lifestyle factors, including diet, have long been recognised as potentially important determinants of cancer risk. In addition to the significant role diet plays in affecting body fatness, a risk factor for several cancers, experimental studies have indicated that diet may influence the cancer process in several ways. Prospective studies have shown that dietary patterns characterised by higher intakes of fruits, vegetables, and whole-grain foods, and lower intakes of red and processed meats and salt, are related to reduced risks of death and cancer, and that a healthy diet can improve overall survival after diagnosis of breast and colorectal cancers. There is evidence that high intakes of fruit and vegetables may reduce the risk of cancers of the aerodigestive tract, and the evidence that dietary fibre protects against colorectal cancer is convincing. Red and processed meats increase the risk of colorectal cancer. Diets rich in high-calorie foods, such as fatty and sugary foods, may lead to increased calorie intake, thereby promoting obesity and leading to an increased risk of cancer. There is some evidence that sugary drinks are related to an increased risk of pancreatic cancer. Taking this evidence into account, the 4th edition of the European Code against Cancer recommends that people have a healthy diet to reduce their risk of cancer: they should eat plenty of whole grains, pulses, vegetables and fruits; limit high-calorie foods (foods high in sugar or fat); avoid sugary drinks and processed meat; and limit red meat and foods high in salt. PMID:26164653

  19. 4th-Grade Readers . . . Not Too Old to Snuggle

    ERIC Educational Resources Information Center

    Gutshall, Anne

    2009-01-01

    Although parents and teachers appreciate the value of reading aloud to early elementary children, they often forget that upper elementary children can still benefit from individual attention during reading. A small pilot study in a South Carolina elementary school demonstrates the value of pairing adults and children for regular reading time.…

  20. European Code against Cancer, 4th Edition: Tobacco and cancer.

    PubMed

    Leon, Maria E; Peruga, Armando; McNeill, Ann; Kralikova, Eva; Guha, Neela; Minozzi, Silvia; Espina, Carolina; Schüz, Joachim

    2015-12-01

    Tobacco use, and in particular cigarette smoking, is the single largest preventable cause of cancer in the European Union (EU). All tobacco products contain a wide range of carcinogens. The main cancer-causing agents in tobacco smoke are polycyclic aromatic hydrocarbons, tobacco-specific N-nitrosamines, aromatic amines, aldehydes, and certain volatile organic compounds. Tobacco consumers are also exposed to nicotine, leading to tobacco addiction in many users. Cigarette smoking causes cancer in multiple organs and is the main cause of lung cancer, responsible for approximately 82% of cases. In 2012, about 313,000 new cases of lung cancer and 268,000 lung cancer deaths were reported in the EU; 28% of adults in the EU smoked tobacco, and the overall prevalence of current use of smokeless tobacco products was almost 2%. Smokeless tobacco products, a heterogeneous category, are also carcinogenic but cause a lower burden of cancer deaths than tobacco smoking. One low-nitrosamine product, snus, is associated with much lower cancer risk than other smokeless tobacco products. Smoking generates second-hand smoke (SHS), an established cause of lung cancer, and inhalation of SHS by non-smokers is still common in indoor workplaces as well as indoor public places, and more so in the homes of smokers. Several interventions have proved effective for stopping smoking; the most effective intervention is the use of a combination of pharmacotherapy and behavioural support. Scientific evidence leads to the following two recommendations for individual action on tobacco in the 4th edition of the European Code Against Cancer: (1) "Do not smoke. Do not use any form of tobacco"; (2) "Make your home smoke-free. Support smoke-free policies in your workplace". PMID:26272517

  1. PREFACE: 4th International Hadron Physics Conference (TROIA'14)

    NASA Astrophysics Data System (ADS)

    Dağ, Hüseyin; Erkol, Güray; Küçükarslan, Ayşe; Özpineci, Altuğ

    2014-11-01

    The 4th International Conference on Hadron Physics, TROIA'14, was held at Canakkale, Turkey on 1-5 July 2014. Ozyegin University, Middle East Technical University, Canakkale Onsekiz Mart University, Turkish Atomic Energy Authority and HadronPhysics2 Consortium sponsored the conference. It aimed at bringing together the experts and the young scientists working on experimental and theoretical hadron physics. About 50 participants from 10 countries attended the conference. The topics covered included: . Chiral Perturbation Theory . QCD Sum Rules . Effective Field Theory . Exotic Hadrons . Hadron Properties from Lattice QCD . Experimental Results and Future Perspectives . Hadronic Distribution Amplitudes The conference presentations were organized such that the morning sessions contained invited talks and afternoon sessions were devoted to contributed talks. The speakers of the invited talks were: C. Alexandrou, A. Gal, L. Tolos, J.R. Pelaez and M. Schindler. We had also guest speakers D. A. Demir and T. Senger. The conference venue was a resort hotel around Canakkale. As a social program, a guided full-day excursion to the excavation site of the ancient Troia town and Assos was organized. We believe that this conference provided a medium for young scientists and experts in the field to effectively communicate and share ideas. We would like to express our sincere thanks to supporting agencies and to all participants for their contributions and stimulating discussions. We are also grateful to the Scientific Secretary, Bora Işıldak, and all other members of the Organizing Committee for their patience and efforts. 30.10.2014 The Editors

  2. European Code against Cancer, 4th Edition: Cancer screening.

    PubMed

    Armaroli, Paola; Villain, Patricia; Suonio, Eero; Almonte, Maribel; Anttila, Ahti; Atkin, Wendy S; Dean, Peter B; de Koning, Harry J; Dillner, Lena; Herrero, Rolando; Kuipers, Ernst J; Lansdorp-Vogelaar, Iris; Minozzi, Silvia; Paci, Eugenio; Regula, Jaroslaw; Törnberg, Sven; Segnan, Nereo

    2015-12-01

    In order to update the previous version of the European Code against Cancer and formulate evidence-based recommendations, a systematic search of the literature was performed according to the methodology agreed by the Code Working Groups. Based on the review, the 4th edition of the European Code against Cancer recommends: "Take part in organized cancer screening programmes for: Bowel cancer (men and women); Breast cancer (women); Cervical cancer (women)." Organized screening programs are preferable because they provide better conditions to ensure that the Guidelines for Quality Assurance in Screening are followed in order to achieve the greatest benefit with the least harm. Screening is recommended only for those cancers where a demonstrated life-saving effect substantially outweighs the potential harm of examining very large numbers of people who may otherwise never have, or suffer from, these cancers, and when an adequate quality of the screening is achieved. EU citizens are recommended to participate in cancer screening each time an invitation from the national or regional screening program is received and after having read the information materials provided and carefully considered the potential benefits and harms of screening. Screening programs in the European Union vary with respect to the age groups invited and to the interval between invitations, depending on each country's cancer burden, local resources, and the type of screening test used For colorectal cancer, most programs in the EU invite men and women starting at the age of 50-60 years, and from then on every 2 years if the screening test is the guaiac-based fecal occult blood test or fecal immunochemical test, or every 10 years or more if the screening test is flexible sigmoidoscopy or total colonoscopy. Most programs continue sending invitations to screening up to the age of 70-75 years. For breast cancer, most programs in the EU invite women starting at the age of 50 years, and not before the age

  3. Urban Infrasound Observations - Examples from July 4th 2012

    NASA Astrophysics Data System (ADS)

    McComas, S.; Hayward, C.; Golden, P.; McKenna, M.; Simpson, C.

    2012-12-01

    , the Heroy Building Rooftop Array, is a two-element 30m line on a single rooftop. Large-scale fireworks displays in Dallas on 4 July 2012 provided an opportunity to identify and characterize known signals in an urban setting. The identified events were associated with one of these fireworks displays about 2 km from the arrays. Signals from these sources were used to tune processing parameters for an automatic coherent detection process, Progressive Multichannel Correlation Method (PMCC). PMCC was then used to scan the data for all possible firework sources in the urban environment and determine temporal, back azimuth, apparent velocity, and frequency information about the sources. The signal frequencies seen were 10-80 Hz and documented the details of the nearly 30 minute firework show. The resulting PMCC analysis showed potential to effectively identify other, lower frequency sources in the urban environment. These data were also is used to characterize the noise environment. Significant roof-to-roof noise differences may be related to the building configurations and mechanical equipment, as well as the interactions of the winds with the structures. During the evening of July 4th , additional ground deployed infrasound gauges provided a comparison of free surface and rooftop measurements. Permission to publish was granted by Director, Geotechnical and Structures Laboratory.

  4. 75 FR 35649 - Safety Zone; Northern California Annual Fireworks Events, July 4th Fireworks Display

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-23

    ... SECURITY Coast Guard 33 CFR Part 165 Safety Zone; Northern California Annual Fireworks Events, July 4th Fireworks Display AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce the Tahoe City 4th of July Fireworks Display safety zone, from 9 a.m. through 10...

  5. The Effects of Cooperative Learning Strategies on Vocabulary Skills of 4th Grade Students

    ERIC Educational Resources Information Center

    Bilen, Didem; Tavil, Zekiye Müge

    2015-01-01

    This study was carried out to investigate the effects of cooperative learning strategies on the vocabulary skills of 4th grade students. The study was also designed to ascertain the attitudes of the students in the experimental group towards cooperative learning. Out of 96 4th grade students enrolled in the private school where the study took…

  6. The school nutrition program's role in weight management of 4th grade elementary students

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We are attempting to uncover the school nutrition program's role in weight management of 4th grade elementary students. Data was collected within a time frame for the food frequency questionnaire (FFQ) set at two months at the WT Cheney Elementary School and South Wood Elementary for 4th grade stud...

  7. 75 FR 34636 - Safety Zone; Jameson Beach 4th of July Fireworks Display

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-18

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Jameson Beach 4th of July Fireworks Display... temporary safety zone in the navigable waters of Lake Tahoe, for the Jameson Beach 4th of July Fireworks... has a substantial direct effect on State or local governments and would either preempt State law...

  8. 75 FR 34639 - Safety Zone; Reedville July 4th Celebration, Cockrell's Creek, Reedville, VA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-18

    ... Celebration, Cockrell's Creek, Reedville, VA in the Federal Register (75 FR 26157). We received no comments on... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Reedville July 4th Celebration, Cockrell's... the Reedville July 4th Celebration event. This action is intended to restrict vessel traffic...

  9. 76 FR 37650 - Safety Zone; 4th of July Festival Berkeley Marina Fireworks Display Berkeley, CA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-28

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; 4th of July Festival Berkeley Marina... Berkeley Pier, Berkeley, CA in support of the 4th of July Festival Berkeley Marina Fireworks Display... used in the fireworks display. Background and Purpose The City of Berkeley Marina will sponsor the...

  10. 75 FR 26157 - Safety Zone; Reedville July 4th Celebration, Cockrell's Creek, Reedville, VA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-11

    ... Federal Register (73 FR 3316). Public Meeting We do not now plan to hold a public meeting. But you may... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Reedville July 4th Celebration, Cockrell's..., VA in support of the Reedville July 4th Celebration event. This action is intended to restrict...

  11. Science Content Courses: Workshop in Food Chemistry for 4th Grade School Teachers

    ERIC Educational Resources Information Center

    Chaiyapechara, S.; Dong, F. M.

    2004-01-01

    A science content course in food chemistry was offered as a 4-day summer workshop from 1999 to 2001 to 4th grade school teachers in the Seattle School District. The objectives of the workshop were to increase the teachers' knowledge of food science, to perform simple experiments that could be used in the 4th grade classroom, and to help the…

  12. 29. VIEW OF 4TH FLOOR'S TELEPHONE RACKS WITH CABLE TRAYS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. VIEW OF 4TH FLOOR'S TELEPHONE RACKS WITH CABLE TRAYS ABOVE. THESE ARE NEWER APPARATUS AND NOT ORIGINAL. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  13. 16. 4th floor roof, view west, north side of setback ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. 4th floor roof, view west, north side of setback to left and delivery stair bulkhead to right - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  14. TID Test Results for 4th Generation iPad(TradeMark)

    NASA Technical Reports Server (NTRS)

    Guertin, S. M.; Allen, G. R.; McClure, S. S.; LaBel, K. A.

    2013-01-01

    TID testing of 4th generation iPads is reported. Of iPad subsystems, results indicate that the charging circuitry and display drivers fail at lowest TID levels. Details of construction are investigated for additional testing of components.

  15. 18. DETAILED OFFSHORE VIEW OF 4TH TEE, LOOKING NORTHWEST, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. DETAILED OFFSHORE VIEW OF 4TH TEE, LOOKING NORTHWEST, SHOWING TRANSITION FROM WOOD BENTS TO CONCRETE BENTS - Huntington Beach Municipal Pier, Pacific Coast Highway at Main Street, Huntington Beach, Orange County, CA

  16. Systematically frameshifting by deletion of every 4th or 4th and 5th nucleotides during mitochondrial transcription: RNA self-hybridization regulates delRNA expression.

    PubMed

    Seligmann, Hervé

    2016-01-01

    In mitochondria, secondary structures punctuate post-transcriptional RNA processing. Recently described transcripts match the human mitogenome after systematic deletions of every 4th, respectively every 4th and 5th nucleotides, called delRNAs. Here I explore predicted stem-loop hairpin formation by delRNAs, and their associations with delRNA transcription and detected peptides matching their translation. Despite missing 25, respectively 40% of the nucleotides in the original sequence, del-transformed sequences form significantly more secondary structures than corresponding randomly shuffled sequences, indicating biological function, independently of, and in combination with, previously detected delRNA and thereof translated peptides. Self-hybridization decreases delRNA abundances, indicating downregulation. Systematic deletions of the human mitogenome reveal new, unsuspected coding and structural informations. PMID:27018206

  17. 75 FR 38721 - Safety Zone; Munising 4th of July Fireworks, South Bay, Lake Superior, Munising, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-06

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Munising 4th of July Fireworks, South Bay... is intended to restrict vessels from a portion of South Bay during the Munising 4th of July Fireworks... from hazards associated with the Munising 4th of July Fireworks display. Based on the explosive...

  18. 75 FR 34369 - Safety Zones; City of Chicago's July 4th Celebration Fireworks, Lake Michigan, Chicago, IL

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-17

    ... Chicago's July 4th Celebration Fireworks, Chicago, Illinois in the Federal Register (75 FR 22330). We... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zones; City of Chicago's July 4th Celebration... associated with the City of Chicago's July 4th Celebration Fireworks. The Captain of the Port, Sector...

  19. 75 FR 34379 - Safety Zone; Mackinac Island 4th of July Fireworks, Lake Huron, Mackinac Island, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-17

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Mackinac Island 4th of July Fireworks, Lake... intended to restrict vessels from a portion of Lake Huron during the Mackinac Island 4th of July Fireworks... with the Mackinac Island 4th of July fireworks display. The fireworks display will occur between 9:45...

  20. 75 FR 38718 - Safety Zone; Sault Sainte Marie 4th of July Fireworks, St. Mary's River, Sault Sainte Marie, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-06

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Sault Sainte Marie 4th of July Fireworks... the Sault Sainte Marie 4th of July Fireworks display, July ] 4, 2010. This temporary safety zone is... with the Sault Sainte Marie 4th of July Fireworks display. The fireworks display is planned to...

  1. 20. TYPICAL VIEW OF FRONT WINDOWS FROM 4TH TO 9TH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. TYPICAL VIEW OF FRONT WINDOWS FROM 4TH TO 9TH FLOOR WITH WHITE GLAZED TERRA COTTA SILL AND HEADERS. MULLIONS ARE ORANGE BROWN BRICKS LIKE THE WALLS. BRICKS ARE IN FLEMISH BOND PATTERN. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  2. Using 4th order Runge-Kutta method for solving a twisted Skyrme string equation

    NASA Astrophysics Data System (ADS)

    Hadi, Miftachul; Anderson, Malcolm; Husein, Andri

    2016-03-01

    We study numerical solution, especially using 4th order Runge-Kutta method, for solving a twisted Skyrme string equation. We find numerically that the value of minimum energy per unit length of vortex solution for a twisted Skyrmion string is 20.37 × 1060 eV/m.

  3. 77 FR 39408 - Safety Zone; Buffalo July 4th Fireworks, Lake Erie, Buffalo, NY

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-03

    ... DHS Department of Homeland Security FR Federal Register NPRM Notice of Proposed Rulemaking A... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Buffalo July 4th Fireworks, Lake Erie, Buffalo, NY AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard...

  4. Assessment of an Engineering Technology Outreach Program for 4th-7th Grade Girls

    ERIC Educational Resources Information Center

    Dell, Elizabeth M.; Christman, Jeanne; Garrick, Robert D.

    2011-01-01

    This paper describes a workshop led by female Engineering Technology students, with support from female faculty, to provide an introduction to Engineering Technology to 4th-7th grade girls through a series of interactive laboratory experiments. This outreach program was developed to improve attitudes towards science and engineering in middle…

  5. 75 FR 33170 - Safety Zone; City of Martinez 4th of July Fireworks, Martinez, CA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-11

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; City of Martinez 4th of July Fireworks, Martinez, CA AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone for the launching of fireworks being sponsored by the City of...

  6. Improving Social Interaction among 4th Grade Students through Social Skills Instruction.

    ERIC Educational Resources Information Center

    Dunleavy, Shannon; Karwowski, Sandra; Shudes-Eitel, Jennifer

    This action research project implemented a program for improving social skills in order to establish positive interaction among 4th grade students at a northern Chicago suburban school. Social skills deficiency was documented through behavior checklists and referrals, teacher observations and student reflection. Teachers reported that low incomes,…

  7. Relationships between Grade Levels, Personal Factors, and Instructional Variation among 4th-12th Grade Teachers

    ERIC Educational Resources Information Center

    White, Jacquelyn M.

    2011-01-01

    The purpose of this quantitative correlational study was to investigate relationships between grade levels, personal factors of teachers, and instructional variety used by 4th-12th grade teachers in Kern County, California. The population under investigation included 2,844 teachers. 235 elementary, middle school/junior high, and secondary teachers…

  8. 77 FR 56208 - Filing Dates for the Kentucky Special Election in the 4th Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-12

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the Kentucky Special Election in the 4th Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special election. SUMMARY: Kentucky has scheduled a...

  9. Reading Development and Achievement of 4th-Grade Hmong Students

    ERIC Educational Resources Information Center

    Mahowald, Megan; Loughnane, Megan

    2016-01-01

    Researchers and practitioners alike have noted that Hmong students in the United States do not achieve as well as their monolingual peers and other bilingual students. The current mixed-methods study is designed to describe reading development and achievement of 4th-grade Hmong students in one large, urban school district. This study explores the…

  10. MAIN GATE, INTERSECTION OF 4TH AVE (200 NORTH) AND N ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MAIN GATE, INTERSECTION OF 4TH AVE (200 NORTH) AND N STREET (895 EAST), SALT LAKE CITY, UT. VIEW LOOKING EAST THROUGH MAIN CEMETERY GATE TO CEMETERY'S MAIN STREET, REPHOTOGRAPH OF HISTORIC SHIPLER PHOTO # 18276, UTAH STATE HISTORICAL SOCIETY COLLECTION. - Salt Lake City Cemetery, 200 N Street, Salt Lake City, Salt Lake County, UT

  11. Polarimetric Microwave Emission from Snow Surface: 4th Strokes Component Analysis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effect of ice on the polarimetric 4th Stokes component observations is investigated using WindSat data over Antarctica. The difference in the magnitude of the signal observed during (July 2003) and summer (February 2004) months is investigated using a second harmonic sine function of the azimuth...

  12. 33 CFR 165.166 - Safety Zone: Macy's July 4th Fireworks, East River, NY.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Safety Zone: Macy's July 4th Fireworks, East River, NY. 165.166 Section 165.166 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS AREAS Specific Regulated Navigation...

  13. 33 CFR 165.166 - Safety Zone: Macy's July 4th Fireworks, East River, NY.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CFR 165.23 apply. (2) No vessels, except the Staten Island Ferries, will be allowed to transit the... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety Zone: Macy's July 4th... OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND...

  14. 33 CFR 165.166 - Safety Zone: Macy's July 4th Fireworks, East River, NY.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CFR 165.23 apply. (2) No vessels, except the Staten Island Ferries, will be allowed to transit the... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Safety Zone: Macy's July 4th... OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND...

  15. 33 CFR 165.166 - Safety Zone: Macy's July 4th Fireworks, East River, NY.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CFR 165.23 apply. (2) No vessels, except the Staten Island Ferries, will be allowed to transit the... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Safety Zone: Macy's July 4th... OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND...

  16. 33 CFR 165.166 - Safety Zone: Macy's July 4th Fireworks, East River, NY.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CFR 165.23 apply. (2) No vessels, except the Staten Island Ferries, will be allowed to transit the... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Safety Zone: Macy's July 4th... OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND...

  17. 11. 4TH FLOOR, HOTEL SOAP LINE No. 6 TO NORTHEAST, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. 4TH FLOOR, HOTEL SOAP LINE No. 6 TO NORTHEAST, WITH WRAPPER (LEFT), PRESS (CENTER), AND CUTTER (RIGHT, BEHIND CHUTE); BUCKET CONVEYOR AT RIGHT MOVED WASTE FROM PRESS TO 5TH FLOOR FOR RE-MANUFACTURE - Colgate & Company Jersey City Plant, Building No. B-14, 54-58 Grand Street, Jersey City, Hudson County, NJ

  18. 4th level of 1945 warehouse indicating drag conveyor. From here ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4th level of 1945 warehouse indicating drag conveyor. From here screenings were pumped from the elevator leg to this conveyor. The grains were ground, then conveyed back down to the first floor for bagging. - Stewart Company Grain Elevator, 16 West Carson Street, Pittsburgh, Allegheny County, PA

  19. 94. VIEW OF PILINGS ON SOUTHEAST SIDE, WITH 4TH TEE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    94. VIEW OF PILINGS ON SOUTHEAST SIDE, WITH 4TH TEE IN THE BACKGROUND, FACING WEST-SOUTHWEST FROM SOUTHEAST CORNER OF THE TACKLE BOX. RAMP OF PIER EXTENSION IS VISIBLE ON RIGHT - Huntington Beach Municipal Pier, Pacific Coast Highway at Main Street, Huntington Beach, Orange County, CA

  20. THE FIRST LASING OF 193 NM SASE, 4TH HARMONIC HGHG AND ESASE AT THE NSLS SDL.

    SciTech Connect

    WANG, X.J.; SHEN Y.; WATANABE, T.; MURPHY, J.B.; ROSE, J.; TSANG, T.

    2006-08-28

    The first lasing of three types of single-pass high-gain FELs, SASE at 193 nm, 4th harmonic HGHG at 199 nm and ESASE at the Source Development Lab (SDL) of Brookhaven National Laboratory (BNL) is reported. The saturation of 4th harmonic HGHG and ESASE FELs was observed. We also observed the spectral broadening and instability of the 4th harmonic HGHG.

  1. A study of personality factors and interaction in 4th-year dental students and their teachers.

    PubMed

    Watts, T L; Millard, L

    1997-02-01

    No previous investigation has considered dental student and teaching staff opinions on their relationship with each other. In a day when students are increasingly asked for feedback on the quality of teaching by staff, such investigations are of particular interest. This exploratory study was designed to compare the personality characteristics of a clinical year of dental students with those of the teaching staff they most frequently encountered, and to investigate these factors for possible associations with the quality of perceived teaching-learning interaction between the 2 groups. A complete 4th year of dental students (n = 87), and those teachers whom they met regularly (n = 80), were asked to participate. Subjects completed a form of the Myers-Briggs personality questionnaire simplified for use in education, and were asked to assess their relationship with persons in the other group. All the students and 75% of the staff, after follow-up, returned usable data. There was close similarity between staff and student personality profiles, and perception of working relationships by both groups was largely independent of personality factors and temperament. There were differences in staff perception of their relationship with extrovert and introvert students. Students showed minor differences in their perception of staff relationships with respect to two other personality factors. These findings indicate a substantial similarity between staff and students, and suggest a mature and stable relationship between people in the 2 groups. PMID:9567907

  2. 11th National Meeting of Organic Chemistry and 4th Meeting of Therapeutic Chemistry

    PubMed Central

    Sousa, Maria Emília; Araújo, Maria João; do Vale, Maria Luísa; Andrade, Paula B.; Branco, Paula; Gomes, Paula; Moreira, Rui; Pinho e Melo, Teresa M.V.D.; Freitas, Victor

    2016-01-01

    For the first time under the auspices of Sociedade Portuguesa de Química, the competences of two important fields of Chemistry are brought together into a single event, the 11st National Organic Chemistry Meeting and the the 4th National Medicinal Chemistry Meeting, to highlight complementarities and to promote new synergies. Abstracts of plenary lectures, oral communications, and posters presented during the meeting are collected in this report. PMID:27102166

  3. 11(th) National Meeting of Organic Chemistry and 4(th) Meeting of Therapeutic Chemistry.

    PubMed

    Sousa, Maria Emília; Araújo, Maria João; do Vale, Maria Luísa; Andrade, Paula B; Branco, Paula; Gomes, Paula; Moreira, Rui; Pinho E Melo, Teresa M V D; Freitas, Victor

    2016-01-01

    For the first time under the auspices of Sociedade Portuguesa de Química, the competences of two important fields of Chemistry are brought together into a single event, the 11st National Organic Chemistry Meeting and the the 4th National Medicinal Chemistry Meeting, to highlight complementarities and to promote new synergies. Abstracts of plenary lectures, oral communications, and posters presented during the meeting are collected in this report. PMID:27102166

  4. 10. 4TH FLOOR, HOTEL SOAP LINE No. 6 TO SOUTHWEST, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. 4TH FLOOR, HOTEL SOAP LINE No. 6 TO SOUTHWEST, WITH AUTOMATIC CUTTER (LEFT), PRESS (CENTER), AND WRAPPER (RIGHT); LARGE CHUTE AT CENTER FROM 5TH FLOOR BINS TO 3RD FLOOR SOAP MILLS; OVERHEAD AND FLOOR (LOWER RIGHT) FINISHED GOODS CONVEYORS TO G BLOCK (HAER NO. NJ-71-NN) - Colgate & Company Jersey City Plant, Building No. B-14, 54-58 Grand Street, Jersey City, Hudson County, NJ

  5. Can astronomy enhance UNESCO World Heritage recognition? The paradigm of 4th Dynasty Egyptian pyramids

    NASA Astrophysics Data System (ADS)

    Belmonte, Juan Antonio

    2015-08-01

    The pyramids of Egypt, notably those of the 4th Dinasty as Giza, have always be considered an unmistikable part of human world heritage as the only surviving wonders of the Ancient World. Their majesty, technical hability and innovative character have always beeen considered as representative of ancient Egyptian ingenuity. However, past and present fringe theories about the pyramids and astronomy have always polluted the role of our discipline in the design, construction and symbolism of these impressive monuments. This is indeed unfear. Fortunately, things have started to change in the last couple of decades and now astronomy is interpreted as a neccessary tool for the correct interpretation of the astral eschatology present in the 5th and 6th Dynasty Texts of the Pyramids. Although the pyramid complexes of the 4th Dynasty are mute, there is however recent research showing that a strong astral symbolism could be hidden in many aspects of the complex architecture and in the design of these exceptional monuments. This idea comes from several hints obtained not only from planning and construction, but also from epigraphy and the analysis of celestial and local landscapes. Chronology also plays a most relevant role on this. The pyramid complexes of the 4th Dynasty at Meidum, Dahshur, Giza and Abu Rowash -- all of which enjoy UNESCO World Heritage recognition -- willl be scrutinized. As a consequence, we will show how astronomy can certainly enhance the face value of these extraordinary monuments as a definitive proof of the ancient Egyptian quest for Ma'at, i.e. their perennial obsesion for Cosmic Order.

  6. miR-155 Inhibition Sensitizes CD4+ Th Cells for TREG Mediated Suppression

    PubMed Central

    Rust, Werner; Labhart, Paul; Alexiadis, Vassili; Becker, Christian; Hafner, Mathias; Weith, Andreas; Lenter, Martin C.; Jonuleit, Helmut; Schmitt, Edgar; Mennerich, Detlev

    2009-01-01

    Background In humans and mice naturally occurring CD4+CD25+ regulatory T cells (nTregs) are a thymus-derived subset of T cells, crucial for the maintenance of peripheral tolerance by controlling not only potentially autoreactive T cells but virtually all cells of the adaptive and innate immune system. Recent work using Dicer-deficient mice irrevocably demonstrated the importance of miRNAs for nTreg cell-mediated tolerance. Principal Findings DNA-Microarray analyses of human as well as murine conventional CD4+ Th cells and nTregs revealed a strong up-regulation of mature miR-155 (microRNA-155) upon activation in both populations. Studying miR-155 expression in FoxP3-deficient scurfy mice and performing FoxP3 ChIP-Seq experiments using activated human T lymphocytes, we show that the expression and maturation of miR-155 seem to be not necessarily regulated by FoxP3. In order to address the functional relevance of elevated miR-155 levels, we transfected miR-155 inhibitors or mature miR-155 RNAs into freshly-isolated human and mouse primary CD4+ Th cells and nTregs and investigated the resulting phenotype in nTreg suppression assays. Whereas miR-155 inhibition in conventional CD4+ Th cells strengthened nTreg cell-mediated suppression, overexpression of mature miR-155 rendered these cells unresponsive to nTreg cell-mediated suppression. Conclusion Investigation of FoxP3 downstream targets, certainly of bound and regulated miRNAs revealed the associated function between the master regulator FoxP3 and miRNAs as regulators itself. miR-155 is shown to be crucially involved in nTreg cell mediated tolerance by regulating the susceptibility of conventional human as well as murine CD4+ Th cells to nTreg cell-mediated suppression. PMID:19777054

  7. Proceedings of the 4th International Workshop on Tritium Effects in Plasma Facing Components

    SciTech Connect

    R. A. Causey

    1999-02-01

    The 4th International Workshop on Tritium Effects in Plasma Facing Components was held in Santa Fe, New Mexico on May 14-15, 1998. This workshop occurs every two years, and has previously been held in Livermore/California, Nagoya/Japan, and the JRC-Ispra Site in Italy. The purpose of the workshop is to gather researchers involved in the topic of tritium migration, retention, and recycling in materials used to line magnetic fusion reactor walls and provide a forum for presentation and discussions in this area. This document provides an overall summary of the workshop, the workshop agenda, a summary of the presentations, and a list of attendees.

  8. Proceedings of the 4th International Conference and Exhibition: World Congress on Superconductivity, volume 1

    NASA Technical Reports Server (NTRS)

    Krishen, Kumar (Editor); Burnham, Calvin (Editor)

    1995-01-01

    The papers presented at the 4th International Conference Exhibition: World Congress on Superconductivity held at the Marriott Orlando World Center, Orlando, Florida, are contained in this document and encompass the research, technology, applications, funding, political, and social aspects of superconductivity. Specifically, the areas covered included: high-temperature materials; thin films; C-60 based superconductors; persistent magnetic fields and shielding; fabrication methodology; space applications; physical applications; performance characterization; device applications; weak link effects and flux motion; accelerator technology; superconductivity energy; storage; future research and development directions; medical applications; granular superconductors; wire fabrication technology; computer applications; technical and commercial challenges, and power and energy applications.

  9. Multi-Dimensional Asymptotically Stable 4th Order Accurate Schemes for the Diffusion Equation

    NASA Technical Reports Server (NTRS)

    Abarbanel, Saul; Ditkowski, Adi

    1996-01-01

    An algorithm is presented which solves the multi-dimensional diffusion equation on co mplex shapes to 4th-order accuracy and is asymptotically stable in time. This bounded-error result is achieved by constructing, on a rectangular grid, a differentiation matrix whose symmetric part is negative definite. The differentiation matrix accounts for the Dirichlet boundary condition by imposing penalty like terms. Numerical examples in 2-D show that the method is effective even where standard schemes, stable by traditional definitions fail.

  10. Proceedings of the 4th International Conference and Exhibition: World Congress on Superconductivity, Volume 2

    NASA Technical Reports Server (NTRS)

    Krishen, Kumar (Editor); Burnham, Calvin (Editor)

    1995-01-01

    This document contains papers presented at the 4th International Conference Exhibition: World Congress on Superconductivity held June 27-July 1, 1994 in Orlando, Florida. These documents encompass research, technology, applications, funding, political, and social aspects of superconductivity. The areas covered included: high-temperature materials; thin films; C-60 based superconductors; persistent magnetic fields and shielding; fabrication methodology; space applications; physical applications; performance characterization; device applications; weak link effects and flux motion; accelerator technology; superconductivity energy; storage; future research and development directions; medical applications; granular superconductors; wire fabrication technology; computer applications; technical and commercial challenges; and power and energy applications.

  11. The ratio of 2nd to 4th digit length: a new predictor of disease predisposition?

    PubMed

    Manning, J T; Bundred, P E

    2000-05-01

    The ratio between the length of the 2nd and 4th digits is: (a) fixed in utero; (b) lower in men than in women; (c) negatively related to testosterone and sperm counts; and (d) positively related to oestrogen concentrations. Prenatal levels of testosterone and oestrogen have been implicated in infertility, autism, dyslexia, migraine, stammering, immune dysfunction, myocardial infarction and breast cancer. We suggest that 2D:4D ratio is predictive of these diseases and may be used in diagnosis, prognosis and in early life-style interventions which may delay the onset of disease or facilitate its early detection. PMID:10859702

  12. Design of a Nb3Sn Magnet for a 4th Generation ECR Ion Source

    SciTech Connect

    Prestemon, S,; Trillaud, F.; Caspi, S.; Ferracin, P.; Sabbi, G. L.; Lyneis, C. M.; Leitner, D.; Todd, D. S.; Hafalia, R.

    2008-08-17

    The next generation of Electron Cyclotron Resonant (ECR) ion sources are expected to operate at a heating radio frequency greater than 40 GHz. The existing 3rd generation systems, exemplified by the state of the art system VENUS, operate in the 10-28 GHz range, and use NbTi superconductors for the confinement coils. The magnetic field needed to confine the plasma scales with the rf frequency, resulting in peak fields on the magnets of the 4th generation system in excess of 10 T. High field superconductors such as Nb{sub 3}Sn must therefore be considered. The magnetic design of a 4th. generation ECR ion source operating at an rf frequency of 56 GHz is considered. The analysis considers both internal and external sextupole configurations, assuming commercially available Nb{sub 3}Sn material properties. Preliminary structural design issues are discussed based on the forces and margins associated with the coils in the different configurations, leading to quantitative data for the determination of a final magnet design.

  13. Spiritual Health Scale 2011: Defining and Measuring 4th Dimension of Health

    PubMed Central

    Dhar, Neera; Chaturvedi, SK; Nandan, Deoki

    2011-01-01

    In the midst of physical comforts provided by the unprecedented developments in all spheres of life, the humanity is at cross roads and looking at something beyond these means. Spirituality has now been identified globally as an important aspect for providing answers to many questions related to health and happiness. The World Health Organization is also keen at looking beyond physical, mental and social dimensions of the health, and the member countries are actively exploring the 4th Dimension of the health i.e. the spiritual health and its impact on the overall health and happiness of an individual. National Institute of Health and Family Welfare (NIHFW), realized this need and initiated a research study in this direction. In this study, an effort was made to define this 4th Dimension of health from a common worldly person's perspective and measure it. 3 Domains, 6 Constructs and 27 Determinants of spiritual health were identified through a scientific process. A statistically reliable and valid Spiritual Health Scale (SHS 2011) containing 114 items has been developed. Construct validity and test- retest reliability has been established for urban educated adult population. The scale is first of its kind in the world to measure the spiritual health of a common worldly person, which is devoid of religious and cultural bias. Its items have universal applicability. PMID:22279257

  14. Computational aspects of the nonlinear normal mode initialization of the GLAS 4th order GCM

    NASA Technical Reports Server (NTRS)

    Navon, I. M.; Bloom, S. C.; Takacs, L.

    1984-01-01

    Using the normal modes of the GLAS 4th Order Model, a Machenhauer nonlinear normal mode initialization (NLNMI) was carried out for the external vertical mode using the GLAS 4th Order shallow water equations model for an equivalent depth corresponding to that associated with the external vertical mode. A simple procedure was devised which was directed at identifying computational modes by following the rate of increase of BAL sub M, the partial (with respect to the zonal wavenumber m) sum of squares of the time change of the normal mode coefficients (for fixed vertical mode index) varying over the latitude index L of symmetric or antisymmetric gravity waves. A working algorithm is presented which speeds up the convergence of the iterative Machenhauer NLNMI. A 24 h integration using the NLNMI state was carried out using both Matsuno and leap-frog time-integration schemes; these runs were then compared to a 24 h integration starting from a non-initialized state. The maximal impact of the nonlinear normal mode initialization was found to occur 6-10 hours after the initial time.

  15. PREFACE: 4th International Conference on Mathematical Modeling in Physical Sciences (IC-MSquare2015)

    NASA Astrophysics Data System (ADS)

    Vlachos, Dimitrios; Vagenas, Elias C.

    2015-09-01

    The 4th International Conference on Mathematical Modeling in Physical Sciences (IC-MSQUARE) took place in Mykonos, Greece, from Friday 5th June to Monday 8th June 2015. The Conference was attended by more than 150 participants and hosted about 200 oral, poster, and virtual presentations. There were more than 600 pre-registered authors. The 4th IC-MSQUARE consisted of different and diverging workshops and thus covered various research fields where Mathematical Modeling is used, such as Theoretical/Mathematical Physics, Neutrino Physics, Non-Integrable Systems, Dynamical Systems, Computational Nanoscience, Biological Physics, Computational Biomechanics, Complex Networks, Stochastic Modeling, Fractional Statistics, DNA Dynamics, Macroeconomics etc. The scientific program was rather intense as after the Keynote and Invited Talks in the morning, three parallel oral and one poster session were running every day. However, according to all attendees, the program was excellent with a high quality of talks creating an innovative and productive scientific environment for all attendees. We would like to thank the Keynote Speaker and the Invited Speakers for their significant contribution to IC-MSQUARE. We also would like to thank the Members of the International Advisory and Scientific Committees as well as the Members of the Organizing Committee.

  16. Crime rates and sedentary behavior among 4th grade Texas school children

    PubMed Central

    Brown, H Shelton; Pérez, Adriana; Mirchandani, Gita G; Hoelscher, Deanna M; Kelder, Steven H

    2008-01-01

    Introduction Although per capita crime has generally fallen over the period which coincides with the obesity epidemic, it has not fallen uniformly across communities. It also has not fallen enough to allay fears on the part of parents. Over the past 30 years, technological changes have made the indoor alternatives to playing outside, where children are more vulnerable to criminal activity, more enjoyable (cable TV, video games, and the internet) and comfortable (the spread of air conditioning to low income neighborhoods). We determined whether indoor sedentary behavior patterns are associated with community crime statistics. 4th graders in the U.S. are typically 9 or 10 years old. Methods We used data from the 2004–2005 Texas School Physical Activity and Nutrition (SPAN) survey linked with U.S. Department of Justice, Office of Justice Programs, Bureau of Justice Statistics data for the years 2000 through 2005 and Texas State data on sexual offenders. The probability-based sample included a total of 7,907 children in grade four. Multistage probability sampling weights were used. The dependent variables included were hours of TV watching, video game playing, computer use and total indoor sedentary behavior after school. Incremental Relative Rates were computed for community crime rates including robberies, all violent crimes, murders, assaults, property crimes, rapes, burglaries, larcenies and motor vehicle thefts as well as for sexual offenders living in the neighborhood. The neighborhood refers to the areas where the students at each school live. In the case of sexual offenders, sexual offenders per capita are estimated using the per capita rate in the zip code of the school attended; all other crime statistics are estimated by the crimes per capita in the police department jurisdiction covering the school attended. After controlling for sex, age, and African-American and Hispanic, cross-sectional associations were determined using multivariate Poisson regression

  17. Online inspection

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An online line-scan imaging system capable of both hyperspectral and multispectral visible/near-infrared reflectance imaging was developed to inspect freshly slaughtered chickens on a processing line for wholesomeness. In-plant testing results indicated that the imaging inspection system achieved o...

  18. European Code against Cancer 4th Edition: Alcohol drinking and cancer.

    PubMed

    Scoccianti, Chiara; Cecchini, Michele; Anderson, Annie S; Berrino, Franco; Boutron-Ruault, Marie-Christine; Espina, Carolina; Key, Timothy J; Leitzmann, Michael; Norat, Teresa; Powers, Hilary; Wiseman, Martin; Romieu, Isabelle

    2015-12-01

    Alcohol consumption is the third leading risk factor for disease and mortality in Europe. The International Agency for Research on Cancer (IARC) Monographs provide strengthened evidence that the consumption of alcoholic beverages is causally associated with cancers of the oral cavity, pharynx, larynx, oesophagus, liver, colorectum and female breast, even for low and moderate alcohol intakes. The risk of cancer increases in a dose-dependent manner, and the higher the amount of alcohol consumed, the higher the risk of developing cancer. Several biological mechanisms explain the carcinogenicity of alcohol; among them, ethanol and its genotoxic metabolite acetaldehyde play a major role. Taking all this evidence into account, a recommendation of the 4th edition of the European Code against Cancer (ECAC) is: "If you drink alcohol of any type, limit your intake. Not drinking alcohol is better for cancer prevention." PMID:26115567

  19. General Chemistry Collection for Students (CD-ROM), Abstract of Special Issue 16, 4th Edition

    NASA Astrophysics Data System (ADS)

    2000-07-01

    The General Chemistry Collection contains both new and previously published JCE Software programs that are intended for use by introductory-level chemistry students. These peer-reviewed programs for Macintosh and for Windows are available on a single CD-ROM for convenient distribution to and access by students, and the CD may be adopted for students to purchase as they would a textbook. General Chemistry Collection covers a broad range of topics providing students with interesting information, tutorials, and simulations that will be useful to them as they study chemistry for the first time. There are 22 programs included in the General Chemistry Collection 4th Edition. Their titles and the general chemistry topics they cover are listed in Table 1. Features in This Edition General Chemistry Collection, 4th edition includes:

    • Lessons for Introductory Chemistry and INQUAL-S, two new programs not previously published by JCE Software (abstracts appear below)
    • Writing Electron Dot Structures (1) and Viscosity Measurement: A Virtual Experiment for Windows (2), two programs published individually by JCE Software
    • Periodic Table Live! LE, a limited edition of Periodic Table Live!, 2nd Edition (3) (this replaces Chemistry Navigator (4) and Illustrated Periodic Table (5))
    • Many of the programs from previous editions (6)1
    Hardware and Software Requirements System requirements are given in Table 2. Some programs have additional requirements. See the individual program abstracts at JCE Online, or documentation included on the CD-ROM for more specific information. Licensing and Discounts for Adoptions The General Chemistry Collection is intended for use by individual students. Institutions and faculty members may adopt General Chemistry Collection 4th Edition as they would a textbook. We can arrange for CDs to be packaged with laboratory manuals or other course materials or to be sold for direct distribution to students through the campus

  20. Quark masses and mixings in the RS1 model with a condensing 4th generation

    NASA Astrophysics Data System (ADS)

    Hernández, A. E. Cárcamo; Dib, Claudio O.; Neill, Nicolás A.; Zerwekh, Alfonso R.

    2012-02-01

    We study the hierarchy of quark masses and mixings in a model based on a 5-dimensional spacetime with constant curvature of Randall-Sundrum type with two branes, where the Electroweak Symmetry Breaking is caused dynamically by the condensation of a 4th generation of quarks, due to underlying physics from the 5D bulk and the first KK gluons. We first study the hierarchy of quark masses and mixings that can be obtained from purely adjusting the profile localizations, finding that realistic masses are not reproduced unless non trivial hierarchies of underlying 4-fermion interactions from the bulk are included. Then we study global U(1) symmetries that can be imposed in order to obtain non-symmetric modified Fritzsch-like textures in the mass matrices that reproduce reasonably well quark masses and CKM mixings.

  1. Breakthrough in cardiac arrest: reports from the 4th Paris International Conference.

    PubMed

    Kudenchuk, Peter J; Sandroni, Claudio; Drinhaus, Hendrik R; Böttiger, Bernd W; Cariou, Alain; Sunde, Kjetil; Dworschak, Martin; Taccone, Fabio Silvio; Deye, Nicolas; Friberg, Hans; Laureys, Steven; Ledoux, Didier; Oddo, Mauro; Legriel, Stéphane; Hantson, Philippe; Diehl, Jean-Luc; Laterre, Pierre-Francois

    2015-12-01

    Jean-Luc Diehl The French Intensive Care Society organized on 5th and 6th June 2014 its 4th "Paris International Conference in Intensive Care", whose principle is to bring together the best international experts on a hot topic in critical care medicine. The 2014 theme was "Breakthrough in cardiac arrest", with many high-quality updates on epidemiology, public health data, pre-hospital and in-ICU cares. The present review includes short summaries of the major presentations, classified into six main chapters: Epidemiology of CA Pre-hospital management Post-resuscitation management: targeted temperature management Post-resuscitation management: optimizing organ perfusion and metabolic parameters Neurological assessment of brain damages Public healthcare. PMID:26380990

  2. The 4th annual European League Against Rheumatism congress in Lisbon: a personal perspective

    PubMed Central

    Wollheim, Frank A

    2004-01-01

    The 4th annual European League Against Rheumatism congress, held in Lisbon, 18–21 June 2003, had a record turnout of more than 8600 delegates and the abstract submissions increased to 2600. A heat wave and a somewhat substandard venue hampered some of the activities, notably the poster sessions. The scientific program was comprehensive and of a high class, and it was organized in 10–12 parallel sessions. The European League Against Rheumatism standing committees are expanding their activities and stimulating European cooperation (e.g. by creating databases and guidelines, and by starting research programs). The standing committees presented several areas where European cooperative work is in progress. Advances in drug therapy were a prominent theme and were well presented. Commercialism remains a problem for this meeting as for other similar large meetings, where satellite symposia surround the scientific program of the congress and often duplicate this. PMID:14979931

  3. FAST DISPLACEMENT PROBABILITY PROFILE APPROXIMATION FROM HARDI USING 4TH-ORDER TENSORS.

    PubMed

    Barmpoutis, Angelos; Vemuri, Baba C; Forder, John R

    2008-05-14

    Cartesian tensor basis have been widely used to approximate spherical functions. In Medical Imaging, tensors of various orders have been used to model the diffusivity function in Diffusion-weighted MRI data sets. However, it is known that the peaks of the diffusivity do not correspond to orientations of the underlying fibers and hence the displacement probability profiles should be employed instead. In this paper, we present a novel representation of the probability profile by a 4(th) order tensor, which is a smooth spherical function that can approximate single-fibers as well as multiple-fiber structures. We also present a method for efficiently estimating the unknown tensor coefficients of the probability profile directly from a given high-angular resolution diffusion-weighted (HARDI) data set. The accuracy of our model is validated by experiments on synthetic and real HARDI datasets from a fixed rat spinal cord. PMID:20046536

  4. Report on the 4th International IUPAP Women in Physics Conference

    NASA Astrophysics Data System (ADS)

    Correa, Cynthia

    2011-10-01

    Stellenbosch, South Africa was the site of the 4^th International Union of Pure and Applied Physics (IUPAP) International Conference on Women in Physics, which took place on April 5^th-8^th. This conference brought together the diverse contributions of 250 female physicist attendees from nearly 60 countries worldwide to dissect the challenges faced by female physicists worldwide and to propose strategies to attract and retain more girls and women to the field. Having served as a member of the U.S. Delegation, I will discuss the resolutions reached and highlight the most important results of Global Survey of Physicists, where nearly 15,000 physicists shine light on how gender affects their lives and careers.

  5. Food-based Science Curriculum Increases 4(th) Graders Multidisciplinary Science Knowledge.

    PubMed

    Hovland, Jana A; Carraway-Stage, Virginia G; Cela, Artenida; Collins, Caitlin; Díaz, Sebastián R; Collins, Angelo; Duffrin, Melani W

    2013-10-01

    Health professionals and policymakers are asking educators to place more emphasis on food and nutrition education. Integrating these topics into science curricula using hand-on, food-based activities may strengthen students' understanding of science concepts. The Food, Math, and Science Teaching Enhancement Resource (FoodMASTER) Initiative is a compilation of programs aimed at using food as a tool to teach mathematics and science. Previous studies have shown that students experiencing the FoodMASTER curriculum were very excited about the activities, became increasingly interested in the subject matter of food, and were able to conduct scientific observations. The purpose of this study was to: 1) assess 4(th) graders food-related multidisciplinary science knowledge, and 2) compare gains in food-related science knowledge after implementation of an integrated, food-based curriculum. During the 2009-2010 school year, FoodMASTER researchers implemented a hands-on, food-based intermediate curriculum in eighteen 4(th) grade classrooms in Ohio (n=9) and North Carolina (n=9). Sixteen classrooms in Ohio (n=8) and North Carolina (n=8), following their standard science curricula, served as comparison classrooms. Students completed a researcher-developed science knowledge exam, consisting of 13 multiple-choice questions administered pre- and post-test. Only subjects with pre- and post-test scores were entered into the sample (Intervention n=343; Control n=237). No significant differences were observed between groups at pre-test. At post-test, the intervention group scored (9.95±2.00) significantly higher (p=.000) than the control group (8.84±2.37) on a 13-point scale. These findings suggest the FoodMASTER intermediate curriculum is more effective than a standard science curriculum in increasing students' multidisciplinary science knowledge related to food. PMID:25152539

  6. Report of the 4th World Climate Research Programme International Conference on Reanalyses

    NASA Technical Reports Server (NTRS)

    Bosilovich, Michael G.; Rixen, Michel; van Oevelen, Peter; Asrar, Ghassem; Compo, Gilbert; Onogi, Kazutoshi; Simmons, Adrian; Trenberth, Kevin; Behringer, Dave; Bhuiyan, Tanvir Hossain; Capps, Shannon; Chaudhuri, Ayan; Chen, Junye; Chen, Linling; Colasacco-Thumm, Nicole; Escobar, Maria Gabriela; Ferguson, Craig R.; Ishibashi, Toshiyuki; Liberato, Margarida L. R.; Meng, Jesse; Molod, Andrea; Poli, Paul; Roundy, Joshua; Willett, Kate; Wollen, Jack

    2012-01-01

    The 4th WCRP International Conference on Reanalyses provided an opportunity for the international community to review and discuss the observational and modelling research, as well as process studies and uncertainties associated with reanalysis of the Earth System and its components. Characterizing the uncertainty and quality of reanalyses is a task that reaches far beyond the international community of producers, and into the interdisciplinary research community, especially those using reanalysis products in their research and applications. Reanalyses have progressed greatly even in the last 5 years, and newer ideas, projects and data are coming forward. While reanalysis has typically been carried out for the individual domains of atmosphere, ocean and land, it is now moving towards coupling using Earth system models. Observations are being reprocessed and they are providing improved quality for use in reanalysis. New applications are being investigated, and the need for climate reanalyses is as strong as ever. At the heart of it all, new investigators are exploring the possibilities for reanalysis, and developing new ideas in research and applications. Given the many centres creating reanalyses products (e.g. ocean, land and cryosphere research centres as well as NWP and atmospheric centers), and the development of new ideas (e.g. families of reanalyses), the total number of reanalyses is increasing greatly, with new and innovative diagnostics and output data. The need for reanalysis data is growing steadily, and likewise, the need for open discussion and comment on the data. The 4th Conference was convened to provide a forum for constructive discussion on the objectives, strengths and weaknesses of reanalyses, indicating potential development paths for the future.

  7. European Code against Cancer 4th Edition: Medical exposures, including hormone therapy, and cancer.

    PubMed

    Friis, Søren; Kesminiene, Ausrele; Espina, Carolina; Auvinen, Anssi; Straif, Kurt; Schüz, Joachim

    2015-12-01

    The 4th edition of the European Code against Cancer recommends limiting - or avoiding when possible - the use of hormone replacement therapy (HRT) because of the increased risk of cancer, nevertheless acknowledging that prescription of HRT may be indicated under certain medical conditions. Current evidence shows that HRT, generally prescribed as menopausal hormone therapy, is associated with an increased risk of cancers of the breast, endometrium, and ovary, with the risk pattern depending on factors such as the type of therapy (oestrogen-only or combined oestrogen-progestogen), duration of treatment, and initiation according to the time of menopause. Carcinogenicity has also been established for anti-neoplastic agents used in cancer therapy, immunosuppressants, oestrogen-progestogen contraceptives, and tamoxifen. Medical use of ionising radiation, an established carcinogen, can provide major health benefits; however, prudent practices need to be in place, with procedures and techniques providing the needed diagnostic information or therapeutic gain with the lowest possible radiation exposure. For pharmaceutical drugs and medical radiation exposure with convincing evidence on their carcinogenicity, health benefits have to be balanced against the risks; potential increases in long-term cancer risk should be considered in the context of the often substantial and immediate health benefits from diagnosis and/or treatment. Thus, apart from HRT, no general recommendations on reducing cancer risk were given for carcinogenic drugs and medical radiation in the 4th edition of European Code against Cancer. It is crucial that the application of these measures relies on medical expertise and thorough benefit-risk evaluation. This also pertains to cancer-preventive drugs, and self-medication with aspirin or other potential chemopreventive drugs is strongly discouraged because of the possibility of serious, potentially lethal, adverse events. PMID:26390952

  8. Food-based Science Curriculum Increases 4th Graders Multidisciplinary Science Knowledge

    PubMed Central

    Hovland, Jana A.; Carraway-Stage, Virginia G.; Cela, Artenida; Collins, Caitlin; Díaz, Sebastián R.; Collins, Angelo; Duffrin, Melani W.

    2013-01-01

    Health professionals and policymakers are asking educators to place more emphasis on food and nutrition education. Integrating these topics into science curricula using hand-on, food-based activities may strengthen students’ understanding of science concepts. The Food, Math, and Science Teaching Enhancement Resource (FoodMASTER) Initiative is a compilation of programs aimed at using food as a tool to teach mathematics and science. Previous studies have shown that students experiencing the FoodMASTER curriculum were very excited about the activities, became increasingly interested in the subject matter of food, and were able to conduct scientific observations. The purpose of this study was to: 1) assess 4th graders food-related multidisciplinary science knowledge, and 2) compare gains in food-related science knowledge after implementation of an integrated, food-based curriculum. During the 2009–2010 school year, FoodMASTER researchers implemented a hands-on, food-based intermediate curriculum in eighteen 4th grade classrooms in Ohio (n=9) and North Carolina (n=9). Sixteen classrooms in Ohio (n=8) and North Carolina (n=8), following their standard science curricula, served as comparison classrooms. Students completed a researcher-developed science knowledge exam, consisting of 13 multiple-choice questions administered pre- and post-test. Only subjects with pre- and post-test scores were entered into the sample (Intervention n=343; Control n=237). No significant differences were observed between groups at pre-test. At post-test, the intervention group scored (9.95±2.00) significantly higher (p=.000) than the control group (8.84±2.37) on a 13-point scale. These findings suggest the FoodMASTER intermediate curriculum is more effective than a standard science curriculum in increasing students’ multidisciplinary science knowledge related to food. PMID:25152539

  9. Conditions for the generation of cytotoxic CD4(+) Th cells that enhance CD8(+) CTL-mediated tumor regression.

    PubMed

    Li, Kunyu; Baird, Margaret; Yang, Jianping; Jackson, Chris; Ronchese, Franca; Young, Sarah

    2016-08-01

    Adoptive cell therapies (ACTs) using tumor-reactive T cells have shown clinical benefit and potential for cancer treatment. While the majority of the current ACT are focused on using CD8(+) cytotoxic T lymphocytes (CTL), others have shown that the presence of tumor-reactive CD4(+) T helper (Th) cells can greatly enhance the anti-tumor activity of CD8(+) CTL. However, difficulties in obtaining adequate numbers of CD4(+) Th cells through in vitro expansion can limit the application of CD4 Th cells in ACT. This study aims to optimize the culture conditions for mouse CD4 T cells to provide basic information for animal studies of ACT using CD4 T cells. Taking advantage of the antigen-specificity of CD4(+) Th cells from OT-II transgenic mice, we examined different methodologies for generating antigen-specific CD4(+) Th1 cells in vitro. We found that cells grown in complete advanced-DMEM/F12 medium supplemented with low-dose IL-2 and IL-7 induced substantial cell expansion. These Th cells were Th1-like, as they expressed multiple Th1-cytokines and exhibited antigen-specific cytotoxicity. In addition co-transfer of these CD4(+) Th1-like cells with CD8(+) CTL significantly enhanced tumor regression, leading to complete cure in 80% of mice bearing established B16-OVA. These observations indicate that the CD4(+) Th1-like cells generated using the method we optimized are functionally active to eliminate their target cells, and can also assist CD8(+) CTL to enhance tumor regression. The findings of this study provide valuable data for further research into in vitro expansion of CD4(+) Th1-like cells, with potential applications to cancer treatment involving ACT. PMID:27588200

  10. Conditions for the generation of cytotoxic CD4+ Th cells that enhance CD8+ CTL-mediated tumor regression

    PubMed Central

    Li, Kunyu; Baird, Margaret; Yang, Jianping; Jackson, Chris; Ronchese, Franca; Young, Sarah

    2016-01-01

    Adoptive cell therapies (ACTs) using tumor-reactive T cells have shown clinical benefit and potential for cancer treatment. While the majority of the current ACT are focused on using CD8+ cytotoxic T lymphocytes (CTL), others have shown that the presence of tumor-reactive CD4+ T helper (Th) cells can greatly enhance the anti-tumor activity of CD8+ CTL. However, difficulties in obtaining adequate numbers of CD4+ Th cells through in vitro expansion can limit the application of CD4 Th cells in ACT. This study aims to optimize the culture conditions for mouse CD4 T cells to provide basic information for animal studies of ACT using CD4 T cells. Taking advantage of the antigen-specificity of CD4+ Th cells from OT-II transgenic mice, we examined different methodologies for generating antigen-specific CD4+ Th1 cells in vitro. We found that cells grown in complete advanced-DMEM/F12 medium supplemented with low-dose IL-2 and IL-7 induced substantial cell expansion. These Th cells were Th1-like, as they expressed multiple Th1-cytokines and exhibited antigen-specific cytotoxicity. In addition co-transfer of these CD4+ Th1-like cells with CD8+ CTL significantly enhanced tumor regression, leading to complete cure in 80% of mice bearing established B16-OVA. These observations indicate that the CD4+ Th1-like cells generated using the method we optimized are functionally active to eliminate their target cells, and can also assist CD8+ CTL to enhance tumor regression. The findings of this study provide valuable data for further research into in vitro expansion of CD4+ Th1-like cells, with potential applications to cancer treatment involving ACT. PMID:27588200

  11. PREFACE: 4th International Conference on Safe Production and Use of Nanomaterials (Nanosafe2014)

    NASA Astrophysics Data System (ADS)

    Tardif, F.; Damlencourt, J.-F.; Schuster, F.; Gaultier, V.

    2015-05-01

    This volume contains a collection of contributions presented at the 4th International Conference on Safe Production and Use of Nanomaterials (NANOSAFE 2014) held in Grenoble, France, from 18th to 20th November 2014. The issues of fast progress in the field of Nanosafety are up to the potential benefits that nanotechnology can bring to mankind. Making more efficient - more sustainable - easier to share mineral resources, increasing the yields of new energy technologies, enabling drugs that act selectively and locally are just few examples of the wide range of nanomaterial applications that currently benefit humanity. Nevertheless, the dynamic development of nanomaterials requires the adhesion from the general public who rightly demand major progresses in Nanosafety as a prerequisite. This is our exciting responsibility and challenge! Following the successful outcome of the three past international conferences on safe production and use of nanomaterials: Nanosafe 2008, 2010 and 2012, the organizing committee has the pleasure to welcoming you again to Minatec, Grenoble with some of the most famous specialists in the field. This year, two new topics have been added dealing with the "New Application of Nanomaterials" and "Nano-responsible Development" in addition to the usual issues addressed in previous Nanosafe conferences such as Expology, Detection and Characterization, Toxicology, Environmental Interactions, Nanomaterials Release, Life Cycle Analysis, Regulation and Standardization, Risk Management. The debates in 2012 proved highly successful so this formula has been kept in 2014 with 3 round tables: Nano-Responsible Development, Risks and Benefits for the Environment, Toxicology Progress. In this 4th edition, there were more than 330 registered participants from 28 different countries including 160 oral presentation covering the whole Nanosafety issues in 12 sessions, satellite workshops and round tables. This high number of participants makes this edition one of

  12. Continuum Kinetic Plasma Modeling Using a Conservative 4th-Order Method with AMR

    NASA Astrophysics Data System (ADS)

    Vogman, Genia; Colella, Phillip

    2012-10-01

    When the number of particles in a Debye sphere is large, a plasma can be accurately represented by a distribution function, which can be treated as a continuous incompressible fluid in phase space. In the most general case the evolution of such a distribution function is described by the 6D Boltzmann-Maxwell partial differential equation system. To address the challenges associated with solving a 6D hyperbolic governing equation, a simpler 3D Vlasov-Poisson system is considered. A 4th-order accurate Vlasov-Poisson model has been developed in one spatial and two velocity dimensions. The governing equation is cast in conservation law form and is solved with a finite volume representation. Adaptive mesh refinement (AMR) is used to allow for efficient use of computational resources while maintaining desired levels of resolution. The model employs a flux limiter to remedy non-physical effects such as numerical dispersion. The model is tested on the two-stream, beam-plasma, and Dory-Guest-Harris instabilities. All results are compared with linear theory.

  13. PREFACE: 4th National Conference on Processing and Characterization of Materials (NCPCM 2014)

    NASA Astrophysics Data System (ADS)

    2015-02-01

    This volume contains selected full length technical papers amongst forty oral presentations made in the 4th National Conference on Processing and Characterization of Materials (NCPCM 2014), NIT Rourkela, Rourkela, Odisha, India, December 5 - 6, 2014. The first conference of the NCPCM series was held at the same place in December 2011. Seeing the enthusiasm of the participants, it was decided to organize such conference in Rourkela every year. The basic idea was to establish a periodical national forum for multi-scale approaches in processing and characterization of materials in the eastern part of India. The conference NCPCM 2014 has successfully carried the tradition of previous conferences; more than fifty participants from twenty different organizations across India have registered. The conference was consisted of six technical sessions of about fifty contributory talks along with three keynote lectures. A metallography contest was also organized during the event. Out of these, thirty four best peer-reviewed contributions are published in this volume of IOP Conference Series: Materials Science and Engineering. We would like to thank all the contributors, members of the organizing committee, session chairs as well as colleagues and students who helped with the preparation of the conference and, particularly, with the preparation of this volume. We convey our heartiest gratitude to the sponsors and advertisers for their contribution.

  14. European Code against Cancer 4th Edition: 12 ways to reduce your cancer risk.

    PubMed

    Schüz, Joachim; Espina, Carolina; Villain, Patricia; Herrero, Rolando; Leon, Maria E; Minozzi, Silvia; Romieu, Isabelle; Segnan, Nereo; Wardle, Jane; Wiseman, Martin; Belardelli, Filippo; Bettcher, Douglas; Cavalli, Franco; Galea, Gauden; Lenoir, Gilbert; Martin-Moreno, Jose M; Nicula, Florian Alexandru; Olsen, Jørgen H; Patnick, Julietta; Primic-Zakelj, Maja; Puska, Pekka; van Leeuwen, Flora E; Wiestler, Otmar; Zatonski, Witold

    2015-12-01

    This overview describes the principles of the 4th edition of the European Code against Cancer and provides an introduction to the 12 recommendations to reduce cancer risk. Among the 504.6 million inhabitants of the member states of the European Union (EU28), there are annually 2.64 million new cancer cases and 1.28 million deaths from cancer. It is estimated that this cancer burden could be reduced by up to one half if scientific knowledge on causes of cancer could be translated into successful prevention. The Code is a preventive tool aimed to reduce the cancer burden by informing people how to avoid or reduce carcinogenic exposures, adopt behaviours to reduce the cancer risk, or to participate in organised intervention programmes. The Code should also form a base to guide national health policies in cancer prevention. The 12 recommendations are: not smoking or using other tobacco products; avoiding second-hand smoke; being a healthy body weight; encouraging physical activity; having a healthy diet; limiting alcohol consumption, with not drinking alcohol being better for cancer prevention; avoiding too much exposure to ultraviolet radiation; avoiding cancer-causing agents at the workplace; reducing exposure to high levels of radon; encouraging breastfeeding; limiting the use of hormone replacement therapy; participating in organised vaccination programmes against hepatitis B for newborns and human papillomavirus for girls; and participating in organised screening programmes for bowel cancer, breast cancer, and cervical cancer. PMID:26164654

  15. 4th-International Symposium on Ultrafast Surface Science - Final Report

    SciTech Connect

    Hrvoje Petek

    2005-01-26

    The 4-th International Symposium on Ultrafast Surface Dynamics (UDS4) was held at the Telluride Summer Research Center on June 22-27, 2003. The International Organizing Committee consisting of Hrvoje Petek (USA), Xiaoyang Zhu (USA), Pedro Echenique (Spain) and Maki Kawai (Japan) brought together a total of 51 participants 16 of whom were from Europe, 10 from Japan, and 25 from the USA. The focus of the conference was on ultrafast electron or light induced processes at well-defined surfaces. Ultrafast surface dynamics concerns the transfer of charge and energy at solid surfaces on the femtosecond time scale. These processes govern rates of fundamental steps in surface reactions, interfacial electron transfer in molecular electronics, and relaxation in spin transport. Recent developments in femtosecond laser technology make it possible to measure by a variety of nonlinear optical techniques directly in the time domain the microscopic rates underlying these interfacial processes. Parallel progress in scanning probe microscopy makes it possible at a single molecular level to perform the vibrational and electronic spectroscopy measurements, to induce reactions with tunneling electrons, and to observe their outcome. There is no doubt that successful development in the field of ultrafast surface dynamics will contribute to many important disciplines.

  16. Multiwavelength Analysis of a Moving Type-IV Radio Burst on 4th March 2012

    NASA Astrophysics Data System (ADS)

    Veluchamy, V.; Chen, Y.; Feng, S.; Du, G.; Song, H.; Kong, X.

    2015-12-01

    We performed a multiwavelength analysis of a moving Type-IV radio burst on 4th march 2012. The Type-IV radio burst is observed between 10:39 - 11:00 UT in the frequency range of 300 - 20 MHz. From the radio heliographic observation, the radio source of the type-IV burst is traced and their sky plane speed is estimated as ~ 370 km/s. A plasmoid structure is ejected during the impulsive phase of the flare, at the same time of the type-IV burst and the structure is clearly observed at SDO/AIA 131 Å channel. From this, we find that the radio source moves with the plasmoid. The high brightness temperature profile in the range of 108 - 109 K and the moderate polarization between -50 - 30 % supports the plasma emission mechanism. Further the differential emission measure (DEM) analysis will be carried out and their results will be presented to provide more evidence of the emission mechanism.

  17. European Code against Cancer 4th Edition: Ultraviolet radiation and cancer.

    PubMed

    Greinert, Rüdiger; de Vries, Esther; Erdmann, Friederike; Espina, Carolina; Auvinen, Anssi; Kesminiene, Ausrele; Schüz, Joachim

    2015-12-01

    Ultraviolet radiation (UVR) is part of the electromagnetic spectrum emitted naturally from the sun or from artificial sources such as tanning devices. Acute skin reactions induced by UVR exposure are erythema (skin reddening), or sunburn, and the acquisition of a suntan triggered by UVR-induced DNA damage. UVR exposure is the main cause of skin cancer, including cutaneous malignant melanoma, basal-cell carcinoma, and squamous-cell carcinoma. Skin cancer is the most common cancer in fair-skinned populations, and its incidence has increased steeply over recent decades. According to estimates for 2012, about 100,000 new cases of cutaneous melanoma and about 22,000 deaths from it occurred in Europe. The main mechanisms by which UVR causes cancer are well understood. Exposure during childhood appears to be particularly harmful. Exposure to UVR is a risk factor modifiable by individuals' behaviour. Excessive exposure from natural sources can be avoided by seeking shade when the sun is strongest, by wearing appropriate clothing, and by appropriately applying sunscreens if direct sunlight is unavoidable. Exposure from artificial sources can be completely avoided by not using sunbeds. Beneficial effects of sun or UVR exposure, such as for vitamin D production, can be fully achieved while still avoiding too much sun exposure and the use of sunbeds. Taking all the scientific evidence together, the recommendation of the 4th edition of the European Code Against Cancer for ultraviolet radiation is: "Avoid too much sun, especially for children. Use sun protection. Do not use sunbeds." PMID:26096748

  18. 4th annual primary care ethics conference: ethics education and lifelong learning

    PubMed Central

    Spicer, John; McKenzie-Edwards, Emma; Misselbrook, David

    2014-01-01

    Primary care ethics is a field of study that has recently found new life, with calls to establish the relevance of ethical discussion in general practice, to gather a body of literature and to carve out an intellectual space for primary care on the academic landscape of bioethics. In this report, we reflect on the key strands of the 4th primary care ethics conference held at the Royal Society of Medicine, on a theme of ethics education and lifelong learning: first, to produce insights that have relevance for policy and practice; and second, to illustrate the idea that not only is ethics relevant in primary care, but primary care is relevant in medical ethics. Core themes included the advantages and disadvantages of prescriptive ways of doing ethics in education, ethical reflection and potential risk to professional status, the need to deal with societal change and to take on board the insights gained from empirical work, whether this is about different kinds of fatherhood, or work on the causes of moral distress in healthcare workers. PMID:25949739

  19. Cutting orientations for non-complex parts in 4th axis machining

    NASA Astrophysics Data System (ADS)

    Osman Zahid, M. N.; Case, K.; Watts, D. M.

    2016-02-01

    The application of Computer Numerically Controlled (CNC) machining for Rapid Manufacturing processes (CNC-RM) exploits the innate potential of 4th axis machining. The use of an indexer allows the workpiece to be rotated to various orientations which directly increased the region accessible to the cutting tool. However, in order to avoid thin webs and preserve tool life, cutting must be executed with a minimum of three orientations even for geometrically simple parts. Recent findings have suggested the separation of cutting orientations into roughing and finishing operations. Thus, the selection of orientations in finishing processes becomes more flexible and independent. This study was conducted to identify the effects of using a minimum of two cutting orientations in finishing operations for CNC-RM applications. This method is only applicable for non-complex parts where all the features can be machined from two directions. The results of the study illustrate the positive effects of minimizing the number of orientations. Despite improvement in machining operations, the complexity in defining the cutting orientations was also reduced.

  20. European Code against Cancer 4th Edition: Ionising and non-ionising radiation and cancer.

    PubMed

    McColl, Neil; Auvinen, Anssi; Kesminiene, Ausrele; Espina, Carolina; Erdmann, Friederike; de Vries, Esther; Greinert, Rüdiger; Harrison, John; Schüz, Joachim

    2015-12-01

    Ionising radiation can transfer sufficient energy to ionise molecules, and this can lead to chemical changes, including DNA damage in cells. Key evidence for the carcinogenicity of ionising radiation comes from: follow-up studies of the survivors of the atomic bombings in Japan; other epidemiological studies of groups that have been exposed to radiation from medical, occupational or environmental sources; experimental animal studies; and studies of cellular responses to radiation. Considering exposure to environmental ionising radiation, inhalation of naturally occurring radon is the major source of radiation in the population - in doses orders of magnitude higher than those from nuclear power production or nuclear fallout. Indoor exposure to radon and its decay products is an important cause of lung cancer; radon may cause approximately one in ten lung cancers in Europe. Exposures to radon in buildings can be reduced via a three-step process of identifying those with potentially elevated radon levels, measuring radon levels, and reducing exposure by installation of remediation systems. In the 4th Edition of the European Code against Cancer it is therefore recommended to: "Find out if you are exposed to radiation from naturally high radon levels in your home. Take action to reduce high radon levels". Non-ionising types of radiation (those with insufficient energy to ionise molecules) - including extremely low-frequency electric and magnetic fields as well as radiofrequency electromagnetic fields - are not an established cause of cancer and are therefore not addressed in the recommendations to reduce cancer risk. PMID:26126928

  1. Project ASTRO: Local Coalitions for Bringing Astronomers to 4th - 9th Grade Classrooms

    NASA Astrophysics Data System (ADS)

    Fraknoi, Andrew

    1998-05-01

    We report on Project ASTRO, an NSF and NASA funded program that now links professional and amateur astronomers with local 4th through 9th grade teachers in 10 sites around the country. Each site matches and trains about 20-25 astronomer-teacher partnerships per year, focusing on hands-on, age-appropriate activities, demonstrations of the scientific method, as well as family and community outreach. Over 10,000 copies of the project's 813-page UNIVERSE AT YOUR FINGERTIPS resource and activity notebook (published by the A.S.P) are now in use in educational institututions around the world. The project's HOW-TO-MANUAL is being used as a practical guide to establishing astronomer-teacher partnerships where no formal ASTRO site exists, and a 12-minute video explaining and demonstrating the project is also available. In each of the ten sites, a coalition of educational and scientific institutions is assisting the project with in-kind donations, publicity, personnel, training, materials, etc. We are conducting an experiment (at the behest of NSF) to see to what degree the sites can become self-supporting over time. (One site, in Salt Lake City, has already received full funding from a local foundation.) We will discuss the progress of the project and will have a variety of sample materials available, including our annotated catalog of national astronomy and space science education projects (see associated URL).

  2. A Teaching Model for Scaffolding 4th Grade Students' Scientific Explanation Writing

    NASA Astrophysics Data System (ADS)

    Yang, Hsiu-Ting; Wang, Kuo-Hua

    2014-08-01

    Improving students scientific explanations is one major goal of science education. Both writing activities and concept mapping are reported as effective strategies for enhancing student learning of science. The purpose of this study was to examine the effect of a teaching model, named the DCI model, which integrates a Descriptive explanation writing activity, Concept mapping, and an Interpretive explanation writing activity, is introduced in a 4th grade science class to see if it would improve students' scientific explanations and understanding. A quasi-experimental design, including a non-randomized comparison group and a pre- and post-test design, was adopted for this study. An experimental group of 25 students were taught using the DCI teaching model, while a comparison group received a traditional lecture teaching. A rubric and content analysis was used to assess students' scientific explanations. The independent sample t test was used to measure difference in conceptual understanding between the two groups, before and after instruction. Then, the paired t test analysis was used to understand the promotion of the DCI teaching model. The results showed that students in the experimental group performed better than students in the comparison group, both in scientific concept understanding and explanation. Suggestions for using concept mapping and writing activities (the DCI teaching model) in science classes are provided in this study.

  3. Need for Specific Sugar-Sweetened Beverage Lessons for 4th and 5th Graders

    PubMed Central

    Bea, Jennifer W.; Jacobs, Laurel; Waits, Juanita; Hartz, Vern; Martinez, Stephanie H.; Standfast, Rebecca D.; Farrell, Vanessa A.; Bawden, Margine; Whitmer, Evelyn; Misner, Scottie

    2015-01-01

    Objective Consumption of sugar-sweetened beverages (SSB) is linked to obesity. We hypothesized that school-based nutrition education would decrease SSB consumption. Design Self-selected interventional cohort with random selection for pre and post measurements Setting Arizona SNAP-Ed eligible schools Participants Randomly selected (9%) 4th and 5th grade classroom students Intervention The University of Arizona Nutrition Network (UANN) provided general nutrition education training and materials to teachers, to be delivered to their students. The UANN administered behavioral questionnaires to students in both Fall and Spring. Main Outcome Measure(s) Change in SSB consumption Analyses Descriptive statistics were computed for student demographics and beverage consumption on the day prior to testing. Paired t-tests evaluated change in classroom averages. Linear regression assessed potential correlates of SSB consumption. Results Fall mean SSB consumption was 1.1 (±0.2) times; mean milk and water intake were 1.6 (±0.2) and 5.2 (±0.7) times, respectively. Beverage consumption increased (3.2%) in springtime, with increased SSBs (14.4%) accounting for the majority (p=0.006). Change in SSB consumption was negatively associated with baseline SSB and water consumption, but positively associated with baseline milk fat (p≤0.05). Conclusions and Implications The results suggest the need for beverage specific education to encourage children to consume more healthful beverages in warmer weather. PMID:25239840

  4. Suggestions for Teaching 4th Grade LD Students the Concept of Longitude and Latitude in Geography.

    ERIC Educational Resources Information Center

    Holley, Cherie M.

    The paper suggests appropriate activities for teaching learning disabled fourth graders in a regular class the concepts of geographical latitude and longitude. Application of the learning principles identified in a review of the literature suggests the need to include visual, auditory, kinesthetic, and tactile activities of benefit to the entire…

  5. The Ratio of 2nd to 4th Digit Length in Korean Alcohol-dependent Patients

    PubMed Central

    Han, Changwoo; Bae, Hwallip; Lee, Yu-Sang; Won, Sung-Doo; Kim, Dai Jin

    2016-01-01

    Objective The ratio of 2nd to 4th digit length (2D:4D) is a sexually dimorphic trait. Men have a relatively shorter second digit than fourth digit. This ratio is thought to be influenced by higher prenatal testosterone level or greater sensitivity to androgen. The purpose of this study is to investigate the relationship between alcohol dependence and 2D:4D in a Korean sample and whether 2D:4D can be a biologic marker in alcohol dependence. Methods In this study, we recruited 87 male patients with alcohol dependence from the alcohol center of one psychiatric hospital and 52 healthy male volunteers who were all employees in the same hospital as controls. We captured images of the right and left hands of patients and controls using a scanner and extracted data with a graphics program. We measured the 2D:4D of each hand and compared the alcohol dependence group with the control group. We analyzed these ratios using an independent-samples t-test. Results The mean 2D:4D of patients was 0.934 (right hand) and 0.942 (left hand), while the mean 2D:4D of controls was 0.956 (right hand) and 0.958 (left hand). Values for both hands were significantly lower for patients than controls (p<0.001, right hand; p=0.004, left hand). Conclusion Patients who are alcohol dependent have a significantly lower 2D:4D than controls, similar to the results of previous studies, which suggest that a higher prenatal testosterone level in the gonadal period is related to alcoholism. Furthermore, 2D:4D is a possible predictive marker of alcohol dependence. PMID:27121425

  6. PREFACE: 4th International Workshop on Statistical Physics and Mathematics for Complex Systems (SPMCS)

    NASA Astrophysics Data System (ADS)

    Wang, Alexandre; Abe, Sumiyoshi; Li, Wei

    2015-04-01

    This volume contains 24 contributed papers presented at the 4th International Workshop on Statistical Physics and Mathematics for Complex Systems (SPMCS) held during October 12-16, 2014 in Yichang, China. Each paper was peer-reviewed by at least one referee chosen from a distinguished international panel. The previous three workshops of this series were organized in 2008, 2010, and 2012, in Le Mans, France, Wuhan, China, and Kazan, Russia, respectively. The SPMCS international workshop series is destined mainly to communicate and exchange research results and information on the fundamental challenges and questions in the vanguard of statistical physics, thermodynamics and mathematics for complex systems. More specifically, the topics of interest touch, but are not limited to, the following: • Fundamental aspects in the application of statistical physics and thermodynamics to complex systems and their modeling • Finite size and non-extensive system • Fluctuation theorems and equalities, quantum thermodynamics • Variational principle for random dynamics • Fractal geometry, fractional mathematics More than 50 participants from 7 countries participated in SPMCS-2014. 35 oral contributions were presented at the workshop. We would like to take this opportunity to thank the members of the Scientific Program Committee, many of whom acted as reviewers of the papers and responded promptly. We would also like to thank the organizing committee, the session chairs, the technicians and the students for the smooth running of the whole workshop. Thanks also go to China Three Gorges University who provided generous support for the conference venue, as well as exquisite refreshments for the tea breaks. The workshop was also partially supported by Central China Normal University and the Programme of Introducing Talents of Discipline to Universities under grant NO. B08033. Special thanks are due to Ms Juy Zhu who has done excellent editing work with great effort.

  7. 4th International Conference on Energy and Environment 2013 (ICEE 2013)

    NASA Astrophysics Data System (ADS)

    Chakrabarty, Chandan Kumar; Shamsuddin, Abd Halim Bin; Ahmad, Ibrahim Bin; Desa, Mohamed Nor Bin Mohamed; Din, Norashidah Bte Md; Bte Mohd, Lariyah; Hamid, Nasri A.; See, Ong Hang; Hafiz Nagi, Farrukh; Yong, Lee Choon; Pasupuleti, Jagadeesh; Mei, Goh Su; Abdullah, Fairuz Bin; Satgunam, Meenaloshini

    2013-06-01

    The 4th International Conference on Energy & Environment 2013 (ICEE2013) was organized by the Universiti Tenaga Nasional (UNITEN) to provide a platform for creating and sharing ideas among engineers, researchers, scientists, industrialists and students in sustainable green energy and technologies. The theme 'Shaping a Sustainable Future through Advancement in Green Energy Technology' is in line with the University's vision to be a leading global energy university that shapes a sustainable future. The general scopes of the conference are renewable energy, smart grid, green technology, energy policies and economics, sustainable green energy and environment, sustainable education, international cooperation and innovation and technology transfer. Five international keynote speakers delivered their speeches in specialized areas of green energy technology and sustainability. In addition, the conference highlights several special parallel sessions by notable invited presenters in their niche areas, which are: Hybrid Energy Power Quality & Distributed Energy Smart Grid Nuclear Power & Technologies Geohazard Management Greener Environment for Sustainability Advances in Computational Fluid Dynamics The research papers presented in ICEE2013 are included in this volume of IOP Conference Series: Earth and Environmental Science (EES). EES is abstracted and indexed in SCOPUS, GeoBase, GeoRef, Compendex, Inspec, Chemical Abstracts Service, NASA Astrophysics Data System, and International Nuclear Information System (INIS). With the comprehensive programme outline, the organizing committee hopes that the ICEE2013 was a notable intellectual sharing session for the research and academic community in Malaysia and regionally. The organizing committee expresses gratitude to the ICEE2013 delegates for their great support and contributions to the event.

  8. PREFACE: 4th International Conference on: Preservation and Conservation Issues in Digital Printing and Digital Photography

    NASA Astrophysics Data System (ADS)

    Fricker, A.; Green, P.

    2010-04-01

    These conference proceedings contain the written papers of the contributions presented at the 4th International Conference on: Preservation and Conservation Issues in Digital Printing and Digital Photography. The conference was held at the Institute of Physics, London, UK on 27th-28th May 2010. Previous conferences in this series took place in 2000, 2003 and 2006. The aim of this conference series is to inform those responsible for the preservation of digitally printed materials about developments in digital photography and printing technologies. We aim to examine progress in research on inks and substrates and their significance for conservation and preservation issues and techniques. We also hope to develop links between related industries and the conservation/preservation world. Research areas explored in this conference include current developments and future trends in digital printing and photographic technologies; the effect of environmental, storage and salvage conditions on the durability of digital prints and photographs; image processing techniques; image permanence considerations and standards for fastness, permanence and the role of scanning and file formats. We would like to thank all participants for their contribution to the conference programme and these proceedings. Our thanks go to Ms C. Gu and Mr M. Sandy for chairing conference sessions. We are also grateful to Dawn Stewart and the Institute of Physics Conference Team for their invaluable support and assistance in arranging the conference and reception. Finally we would like to extend our thanks to the Society of Imaging Science and Technology (IS&T) for their sponsorship support. The Editors Acknowledgements Conference Organising Committee: Ms A Fricker and Dr. P Green (London College of Communication, University of the Arts London). Proceedings edited and compiled by Ms A Fricker and Dr. P Green.

  9. European Code against Cancer 4th Edition: Environment, occupation and cancer.

    PubMed

    Espina, Carolina; Straif, Kurt; Friis, Søren; Kogevinas, Manolis; Saracci, Rodolfo; Vainio, Harri; Schüz, Joachim

    2015-12-01

    People are exposed throughout life to a wide range of environmental and occupational pollutants from different sources at home, in the workplace or in the general environment - exposures that normally cannot be directly controlled by the individual. Several chemicals, metals, dusts, fibres, and occupations have been established to be causally associated with an increased risk of specific cancers, such as cancers of the lung, skin and urinary bladder, and mesothelioma. Significant amounts of air pollutants - mainly from road transport and industry - continue to be emitted in the European Union (EU); an increased occurrence of lung cancer has been attributed to air pollution even in areas below the EU limits for daily air pollution. Additionally, a wide range of pesticides as well as industrial and household chemicals may lead to widespread human exposure, mainly through food and water. For most environmental pollutants, the most effective measures are regulations and community actions aimed at reducing and eliminating the exposures. Thus, it is imperative to raise awareness about environmental and occupational carcinogens in order to motivate individuals to be proactive in advocating protection and supporting initiatives aimed at reducing pollution. Regulations are not homogeneous across EU countries, and protective measures in the workplace are not used consistently by all workers all the time; compliance with regulations needs to be continuously monitored and enforced. Therefore, the recommendation on Environment and Occupation of the 4th edition of the European Code against Cancer, focusing on what individuals can do to reduce their cancer risk, reads: "In the workplace, protect yourself against cancer-causing substances by following health and safety instructions." PMID:26164655

  10. Learning Natural Selection in 4th Grade with Multi-Agent-Based Computational Models

    NASA Astrophysics Data System (ADS)

    Dickes, Amanda Catherine; Sengupta, Pratim

    2013-06-01

    In this paper, we investigate how elementary school students develop multi-level explanations of population dynamics in a simple predator-prey ecosystem, through scaffolded interactions with a multi-agent-based computational model (MABM). The term "agent" in an MABM indicates individual computational objects or actors (e.g., cars), and these agents obey simple rules assigned or manipulated by the user (e.g., speeding up, slowing down, etc.). It is the interactions between these agents, based on the rules assigned by the user, that give rise to emergent, aggregate-level behavior (e.g., formation and movement of the traffic jam). Natural selection is such an emergent phenomenon, which has been shown to be challenging for novices (K16 students) to understand. Whereas prior research on learning evolutionary phenomena with MABMs has typically focused on high school students and beyond, we investigate how elementary students (4th graders) develop multi-level explanations of some introductory aspects of natural selection—species differentiation and population change—through scaffolded interactions with an MABM that simulates predator-prey dynamics in a simple birds-butterflies ecosystem. We conducted a semi-clinical interview based study with ten participants, in which we focused on the following: a) identifying the nature of learners' initial interpretations of salient events or elements of the represented phenomena, b) identifying the roles these interpretations play in the development of their multi-level explanations, and c) how attending to different levels of the relevant phenomena can make explicit different mechanisms to the learners. In addition, our analysis also shows that although there were differences between high- and low-performing students (in terms of being able to explain population-level behaviors) in the pre-test, these differences disappeared in the post-test.

  11. Ultrasonic Inspection

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Automation Industries Inc. has had more than $2 million in contracts to produce innovative equipment for the Apollo program. When Marshall Space Flight Center sought a fast nondestructive way to inspect butt welds in aluminum alloys for spacecraft, the company developed a reliable ultrasonic device using multiple transducers called "delta manipulators" which detect lack of weld penetration not readily seen in radiograph automation. Industry soon adapted the ultrasonic equipment to a unique rail inspection device that saves countless man hours. Device is contained in self propelled railroad cars produced and operated by the company to check old track welds for deterioration.

  12. 77 FR 39422 - Eighth Coast Guard District Annual Safety Zones; Niceville July 4th Fireworks Show; Boggy Bayou...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-03

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Eighth Coast Guard District Annual Safety Zones; Niceville July 4th Fireworks Show; Boggy Bayou; Niceville, FL AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce a Safety Zone for the Niceville July...

  13. 75 FR 34374 - Safety Zone; Stockton Ports Baseball Club/City of Stockton, 4th of July Fireworks Display...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-17

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Stockton Ports Baseball Club/City of... Ports Baseball Club and the City of Stockton will sponsor the Stockton Ports Baseball Club/City of... Ports Baseball Club/City of Stockton 4th of July Fireworks Display, Stockton, CA. (a) Location....

  14. 78 FR 23869 - Safety Zone; Redwood City 4th of July Fireworks Show; Port of Redwood City, Redwood City, CA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-23

    ..., telephone 202-366-9826. SUPPLEMENTARY INFORMATION: Table of Acronyms DHS Department of Homeland Security FR... Federal Register (73 FR 3316). 4. Public Meeting We do not plan to hold public meetings on this proposed... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Redwood City 4th of July Fireworks...

  15. 78 FR 39998 - Safety Zone; Grand Haven 4th of July Fireworks; Grand River; Grand Haven, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-03

    ...-9826. SUPPLEMENTARY INFORMATION: Table of Acronyms DHS Department of Homeland Security FR Federal... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Grand Haven 4th of July Fireworks; Grand... a State, local, or tribal government, in the aggregate, or by the private sector of...

  16. Examining General and Specific Factors in the Dimensionality of Oral Language and Reading in 4th-10th Grades

    ERIC Educational Resources Information Center

    Foorman, Barbara R.; Koon, Sharon; Petscher, Yaacov; Mitchell, Alison; Truckenmiller, Adrea

    2015-01-01

    The objective of this study was to explore dimensions of oral language and reading and their influence on reading comprehension in a relatively understudied population--adolescent readers in 4th through 10th grades. The current study employed latent variable modeling of decoding fluency, vocabulary, syntax, and reading comprehension so as to…

  17. 78 FR 23866 - Safety Zone; Crescent City 4th of July Fireworks; Crescent City Harbor, Crescent City, CA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-23

    .... SUPPLEMENTARY INFORMATION: Table of Acronyms DHS Department of Homeland Security FR Federal Register NPRM Notice... public dockets in the January 17, 2008, issue of the Federal Register (73 FR 3316). 4. Public Meeting We... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Crescent City 4th of July...

  18. 75 FR 35294 - Safety Zone; Marquette 4th of July Fireworks, Marquette Harbor, Lake Superior, Marquette, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-22

    ...The Coast Guard is establishing a temporary safety zone on Marquette Harbor, Lake Superior, Marquette, MI. This zone is intended to restrict vessels from a portion of Marquette Harbor during the Marquette 4th of July Fireworks display. This temporary safety zone is necessary to protect spectators and vessels from the hazards associated with a firework...

  19. 78 FR 39606 - Safety Zone; City of Menominee 4th of July Fireworks, Green Bay, Menominee, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-02

    ... Security FR Federal Register NPRM Notice of Proposed Rulemaking TFR Temporary Final Rule A. Regulatory... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; City of Menominee 4th of July Fireworks... that may result in the expenditure by a State, local, or tribal government, in the aggregate, or by...

  20. Impacts of a Discussion-Based Academic Language Program on Classroom Interactions in 4th through 7th Grades

    ERIC Educational Resources Information Center

    LaRusso, Maria; Jones, Stephanie M.; Kim, Ha Yeon; Kim, James; Donovan, Suzanne; Snow, Catherine

    2016-01-01

    This paper presents an exploratory analysis of treatment-control differences in the quality of classroom interactions in 4th through 7th grade urban classrooms. Word Generation (WG) is a research-based academic language program for middle school students designed to teach novel vocabulary and literacy through language arts, math, science, and…

  1. 76 FR 38015 - Safety Zones; July 4th Weekend Fireworks Displays Within the Captain of the Port St. Petersburg...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-29

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zones; July 4th Weekend Fireworks Displays Within... under Executive Order 13132, Federalism, if it has a substantial direct effect on State or local governments and would either preempt State law or impose a substantial direct cost of compliance on them....

  2. Teacher Implementation of Reform-Based Mathematics and Implications for Algebra Readiness: A Qualitative Study of 4th Grade Classrooms

    ERIC Educational Resources Information Center

    Sher, Stephen Korb

    2011-01-01

    This study looked at 4th grade classrooms to see "how" teachers implement NCTM standards-based or reform-based mathematics instruction and then analyzed it for the capacity to improve students' "algebra readiness." The qualitative study was based on classroom observations, teacher and administrator interviews, and teacher surveys. The study took…

  3. Proceedings of the International Conference on Educational Data Mining (EDM) (4th, Eindhoven, the Netherlands, July 6-8, 2011)

    ERIC Educational Resources Information Center

    Pechenizkiy, Mykola; Calders, Toon; Conati, Cristina; Ventura, Sebastian; Romero, Cristobal; Stamper, John

    2011-01-01

    The 4th International Conference on Educational Data Mining (EDM 2011) brings together researchers from computer science, education, psychology, psychometrics, and statistics to analyze large datasets to answer educational research questions. The conference, held in Eindhoven, The Netherlands, July 6-9, 2011, follows the three previous editions…

  4. Comparing Science Learning among 4th-, 5th-, and 6th-Grade Students: STS versus Textbook-Based Instruction

    ERIC Educational Resources Information Center

    Yager, Robert E.; Choi, AeRan; Yager, Stuart O.; Akcay, Hakan

    2009-01-01

    Fifteen 4th-, 5th-, and 6th-grade teachers from five school districts each taught two sections of science--one with a Science-Technology-Society (STS) approach and the other with a more traditional textbook approach in which basic science concepts were the major organizers. Local, current, and personally relevant issues provided the context and…

  5. The Influence of Neighborhood Density and Word Frequency on Phoneme Awareness in 2nd and 4th Grades

    ERIC Educational Resources Information Center

    Hogan, Tiffany P.; Bowles, Ryan P.; Catts, Hugh W.; Storkel, Holly L.

    2011-01-01

    Purpose: The purpose of this study was to test the hypothesis that two lexical characteristics--neighborhood density and word frequency--interact to influence performance on phoneme awareness tasks. Methods: Phoneme awareness was examined in a large, longitudinal dataset of 2nd and 4th grade children. Using linear logistic test model, the relation…

  6. 4th Annual SATN Conference 2011: Curriculum Transformation at Universities of Technology: Towards Development of New Generation Universities

    ERIC Educational Resources Information Center

    Mthembu, T.

    2012-01-01

    The South African Technology Network (SATN) would like to thank the Editor of the "South African Journal of Higher Education" (SAJHE) for the opportunity to publish papers read at the 4th Annual SATN Conference that was hosted by Central University of Technology and held in Bloemfontein in November 2011. The journal makes it possible for…

  7. Communicating Science to Impact Learning? A Phenomenological Inquiry into 4th and 5th Graders' Perceptions of Science Information Sources

    ERIC Educational Resources Information Center

    Gelmez Burakgazi, Sevinc; Yildirim, Ali; Weeth Feinstein, Noah

    2016-01-01

    Rooted in science education and science communication studies, this study examines 4th and 5th grade students' perceptions of science information sources (SIS) and their use in communicating science to students. It combines situated learning theory with uses and gratifications theory in a qualitative phenomenological analysis. Data were gathered…

  8. Impact of a Health and Media Literacy Curriculum on 4th-Grade Girls: A Qualitative Study

    ERIC Educational Resources Information Center

    Fuller, Heidi A.; Damico, Amy M.; Rodgers, Shannon

    2004-01-01

    Recent research indicates that young girls are preoccupied with their body size and that the media may be a contributing factor. This study aimed to discover the impact of an interdisciplinary media literacy intervention curriculum on 4th-grade girls in an urban elementary school. The authors developed and implemented a series of lessons that…

  9. Native American Students' Understanding of Geologic Time Scale: 4th-8th Grade Ojibwe Students' Understanding of Earth's Geologic History

    ERIC Educational Resources Information Center

    Nam, Younkyeong; Karahan, Engin; Roehrig, Gillian

    2016-01-01

    Geologic time scale is a very important concept for understanding long-term earth system events such as climate change. This study examines forty-three 4th-8th grade Native American--particularly Ojibwe tribe--students' understanding of relative ordering and absolute time of Earth's significant geological and biological events. This study also…

  10. 76 FR 72957 - 4th Annual Trauma Spectrum Conference: Bridging the Gap Between Research and Clinical Practice of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-28

    ... HUMAN SERVICES National Institutes of Health 4th Annual Trauma Spectrum Conference: Bridging the Gap Between Research and Clinical Practice of Psychological Health and Traumatic Brain Injury: Prevention... Psychological Health and Traumatic Brain Injury: Prevention, Diagnosis, Treatment and Recovery for the Iraq...

  11. Using Inquiry-Based Instruction to Teach Research Methods to 4th-Grade Students in an Urban Setting

    ERIC Educational Resources Information Center

    Hamm, Ellen M.; Cullen, Rebecca; Ciaravino, Melissa

    2013-01-01

    When a college professor who teaches research methods to graduate education students was approached by a local public urban elementary school to help them teach research skills to 4th-graders, it was thought that the process would be simple--take what we did at the college level and differentiate it for the childhood classroom. This article will…

  12. Characterization of HCV Specific CD4+Th17 Immunity in Recurrent Hepatitis C Induced Liver Allograft Fibrosis

    PubMed Central

    Basha, H. Ilias; Subramanian, Vijay; Seetharam, A.; Nath, D.S.; Ramachandran, S.; Anderson, C.D.; Shenoy, S.; Chapman, W.C.; Crippin, J.S.; Mohanakumar, T.

    2011-01-01

    Hepatitis C Virus (HCV) recurrence with accelerated fibrosis following orthotopic liver transplantation (OLT) is a universal phenomenon. To evaluate mechanisms contributing to HCV induced allograft fibrosis/cirrhosis, we investigated HCV specific CD4+Th17 cells and their induction in OLT recipients with recurrence utilizing 51 HCV+ OLT recipients, 15 healthy controls and 9 HCV- OLT recipients. Frequency of HCV specific CD4+ Tcells secreting IFN-γ, IL-17 and IL-10 was analyzed by ELISpot. Serum cytokines and chemokines were analyzed by LUMINEX. Recipients with recurrent HCV induced allograft inflammation and fibrosis/cirrhosis demonstrated a significant increase in frequency of HCV specific CD4+Th17 cells. Increased pro-inflammatory mediators (IL-17, IL-1β, IL-6, IL-8, MCP-1), decreased IFN-γ, and increased IL-4, IL-5 and IL-10 levels were identified. OLT recipients with allograft inflammation and fibrosis/cirrhosis demonstrated increased frequency of Foxp3+ regulatory T cells (Tregs) that inhibited HCV specific CD4+Th1 but not Th17 cells. This suggests that recurrent HCV infection in OLT recipients induces an inflammatory milieu characterized by increased IL-6, IL-1β and decreased IFN-γ which facilitates induction of HCV specific CD4+Th17 cells. These cells are resistant to suppression by Tregs and may mediate an inflammatory cascade leading to cirrhosis in OLT recipients following HCV recurrence. PMID:21446979

  13. 75 FR 38723 - Safety Zone; St. Ignace 4th of July Fireworks, East Moran Bay, Lake Huron, St. Ignace, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-06

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; St. Ignace 4th of July Fireworks, East Moran Bay, Lake Huron, St. Ignace, MI AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone on East Moran Bay, Lake Huron, St....

  14. PREFACE: 4th Global Conference on Materials Science and Engineering (CMSE 2015)

    NASA Astrophysics Data System (ADS)

    Ruda, H. E.; Khotsianovsky, A.

    2015-12-01

    IOP Conference Series: Materials Science and Engineering is publishing a volume of conference proceedings that contains a selection of papers presented at the 4th Global Conference on Materials Science and Engineering (CMSE 2015), which is an annual event that started in 2012. CMSE 2015, technically supported by the Institute of Applied Physics and Materials Engineering of University of Macau, organized by Wuhan Advance Materials Society, was successfully held at the University of Macau-new campus located on Hengqin Island from August 3rd-6th, 2015. It aims to bring together leading academic scientists, researchers and scholars to exchange and share their experience and research results on all aspects of Materials Science and Engineering, and to discuss the practical challenges encountered and the solutions adopted. Macau, one of the two special administrative regions of the People's Republic of China, where East meets West, turned out to be an ideal meeting place for domestic and overseas participants of this annual international conference. The conference program included keynote presentations, special sessions, oral and poster contributions. From several hundred submissions, 52 of the most promising and mainstream, IOP-relevant, contributions were included in this volume. The submissions present original ideas or results of general significance, supported by clear reasoning, compelling evidence and methods, theories and practices relevant to the research. The authors state clearly the problems and the significance of their research to theory and practice. Being a successful conference, this event gathered more than 200 qualified and high-level researchers and experts from over 40 countries, including 10 keynote speakers from 6 countries, which created a good platform for worldwide researchers and engineers to enjoy the academic communication. Taking advantage of this opportunity, we would like to thank all participants of this conference, and particularly the

  15. FOREWORD: 4th International Workshop on New Computational Methods for Inverse Problems (NCMIP2014)

    NASA Astrophysics Data System (ADS)

    2014-10-01

    This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 4th International Workshop on New Computational Methods for Inverse Problems, NCMIP 2014 (http://www.farman.ens-cachan.fr/NCMIP_2014.html). This workshop took place at Ecole Normale Supérieure de Cachan, on May 23, 2014. The prior editions of NCMIP also took place in Cachan, France, firstly within the scope of ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/), and secondly at the initiative of Institut Farman, in May 2012 and May 2013, (http://www.farman.ens-cachan.fr/NCMIP_2012.html), (http://www.farman.ens-cachan.fr/NCMIP_2013.html). The New Computational Methods for Inverse Problems (NCMIP) Workshop focused on recent advances in the resolution of inverse problems. Indeed, inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finances. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the

  16. Regular FPGA based on regular fabric

    NASA Astrophysics Data System (ADS)

    Xun, Chen; Jianwen, Zhu; Minxuan, Zhang

    2011-08-01

    In the sub-wavelength regime, design for manufacturability (DFM) becomes increasingly important for field programmable gate arrays (FPGAs). In this paper, an automated tile generation flow targeting micro-regular fabric is reported. Using a publicly accessible, well-documented academic FPGA as a case study, we found that compared to the tile generators previously reported, our generated micro-regular tile incurs less than 10% area overhead, which could be potentially recovered by process window optimization, thanks to its superior printability. In addition, we demonstrate that on 45 nm technology, the generated FPGA tile reduces lithography induced process variation by 33%, and reduce probability of failure by 21.2%. If a further overhead of 10% area can be recovered by enhanced resolution, we can achieve the variation reduction of 93.8% and reduce the probability of failure by 16.2%.

  17. PREFACE: The 4th Symposium on the Mechanics of Slender Structures (MoSS2013)

    NASA Astrophysics Data System (ADS)

    Cao, Dengqing; Kaczmarczyk, Stefan

    2013-07-01

    This volume of Journal of Physics: Conference Series contains papers presented at the 4th Symposium on the Mechanics of Slender Structures (MoSS2013) run under the auspices of the Institute of Physics Applied Mechanics Group and hosted by Harbin Institute of Technology (China) from 7-9 January 2013. The conference has been organized in collaboration with the Technical Committee on Vibration and Sound of the American Society of Mechanical Engineers and follows a one day seminar on Ropes, Cables, Belts and Chains: Theory and Applications and the MoSS2006 symposium held at the University of Northampton (UK) in 2004 and 2006, respectively, the MoSS2008 symposium held at the University of Maryland Baltimore County (USA) in 2008 and the MoSS2010 symposium hosted by Mondragon University and held in San Sebastian (Spain) in 2010. The remit of the Symposium on the Mechanics of Slender Structures series involves a broad range of scientific areas. Applications of slender structures include terrestrial, marine and space systems. Moving elastic elements such as ropes, cables, belts and tethers are pivotal components of many engineering systems. Their lengths often vary when the system is in operation. The applications include vertical transportation installations and, more recently, space tether propulsion systems. Traction drive elevator installations employ ropes and belts of variable length as a means of suspension, and also for the compensation of tensile forces over the traction sheave. In cranes and mine hoists, cables and ropes are subject to length variation in order to carry payloads. Tethers experiencing extension and retraction are important components of offshore and marine installations, as well as being proposed for a variety of different space vehicle propulsion systems based on different applications of momentum exchange and electrodynamic interactions with planetary magnetic fields. Furthermore, cables and slender rods are used extensively in civil engineering

  18. PREFACE: 4th Workshop on Theory, Modelling and Computational Methods for Semiconductors (TMCSIV)

    NASA Astrophysics Data System (ADS)

    Tomić, Stanko; Probert, Matt; Migliorato, Max; Pal, Joydeep

    2014-06-01

    These conference proceedings contain the written papers of the contributions presented at the 4th International Conference on Theory, Modelling and Computational Methods for Semiconductor materials and nanostructures. The conference was held at the MediaCityUK, University of Salford, Manchester, UK on 22-24 January 2014. The previous conferences in this series took place in 2012 at the University of Leeds, in 2010 at St William's College, York and in 2008 at the University of Manchester, UK. The development of high-performance computer architectures is finally allowing the routine use of accurate methods for calculating the structural, thermodynamic, vibrational, optical and electronic properties of semiconductors and their hetero- and nano-structures. The scope of this conference embraces modelling, theory and the use of sophisticated computational tools in semiconductor science and technology, where there is substantial potential for time-saving in R&D. Theoretical approaches represented in this meeting included: Density Functional Theory, Semi-empirical Electronic Structure Methods, Multi-scale Approaches, Modelling of PV devices, Electron Transport, and Graphene. Topics included, but were not limited to: Optical Properties of Quantum Nanostructures including Colloids and Nanotubes, Plasmonics, Magnetic Semiconductors, Photonic Structures, and Electronic Devices. This workshop ran for three days, with the objective of bringing together UK and international leading experts in the theoretical modelling of Group IV, III-V and II-VI semiconductors, as well as students, postdocs and early-career researchers. The first day focused on providing an introduction and overview of this vast field, aimed particularly at students, with several lectures given by recognized experts in various theoretical approaches. The following two days showcased some of the best theoretical research carried out in the UK in this field, with several contributions also from representatives of

  19. Transfer of a CD4+ Th1 cell line to nude mice effects clearance of Rhodococcus equi from the lung.

    PubMed Central

    Kanaly, S T; Hines, S A; Palmer, G H

    1996-01-01

    Rhodococcus equi, and intracellular respiratory pathogen, causes sever e granulomatous pneumonia in humans with AIDS and in young horses. Pulmonary clearance of R. equi requires functional CD4+ T cells and gamma interferon (IFN-gamma) expression from bronchial lymph node cells. The purpose of this study was to investigate whether R. equi-specific CD4+ Th1 cells could effect clearance of R. equi from the lung. Adoptive transfer of a clearance of R. equi from the lungs. In contrast, mice transfused with a R. equi-specific CD4+ Th2 cell line expressed interleukin-4 but not IFN-gamma mRNA, failed to clear pulmonary infection, and developed granulomas in the lung. Control mice, which did not receive cells, did not produce IFN-gamma or interleukin-4 and developed small pulmonary granulomas. These results clearly show that a Th1 response is sufficient to effect pulmonary clearance of R. equi. PMID:8606068

  20. A selected review of abstracts from the 4th Quadrennial Meeting of the World Federation of Neuro-Oncology.

    PubMed

    Chamberlain, Marc C

    2014-03-01

    The 4th Quadrennial Meeting of the World Federation of Neuro-Oncology (WFNO), San Francisco, CA, USA, 21-24 November 2013 The 4th Quadrennial Meeting of the World Federation of Neuro-Oncology (WFNO) was the largest neuro-oncology meeting that meets once every 4 years and brings together clinicians and scientists from all parts of the world whose focus is on new brain cancer clinical trials and research primarily pertaining to gliomas. The WFNO 2013 meeting included 1 education day, 2.5 days of presentation, 13 sunrise sessions, one town hall meeting, one mini-symposium, 130 oral presentations and 900 abstracts. This short meeting review highlights select adult clinical abstracts presented at WFNO 2013 that will only in part encompass the contents of a large and multifaceted meeting. PMID:25055016

  1. A laboratory model of post-Newtonian gravity with high power lasers and 4th generation light sources

    NASA Astrophysics Data System (ADS)

    Gregori, G.; Levy, M. C.; Wadud, M. A.; Crowley, B. J. B.; Bingham, R.

    2016-04-01

    Using the post-Newtonian formalism of gravity, we attempt to calculate the x-ray Thomson scattering cross section of electrons that are accelerated in the field of a high intensity optical laser. We show that our results are consistent with previous calculations, suggesting that the combination of high power laser and 4th generation light sources may become a powerful platform to test models exploring high order corrections to the Newtonian gravity.

  2. Regular gravitational lagrangians

    NASA Astrophysics Data System (ADS)

    Dragon, Norbert

    1992-02-01

    The Einstein action with vanishing cosmological constant is for appropriate field content the unique local action which is regular at the fixed point of affine coordinate transformations. Imposing this regularity requirement one excludes also Wess-Zumino counterterms which trade gravitational anomalies for Lorentz anomalies. One has to expect dilatational and SL (D) anomalies. If these anomalies are absent and if the regularity of the quantum vertex functional can be controlled then Einstein gravity is renormalizable. On leave of absence from Institut für Theoretische Physik, Universität Hannover, W-3000 Hannover 1, FRG.

  3. High Temperature Inspection System

    SciTech Connect

    Robinson, C.W.

    1999-01-26

    The Remote and Specialty Equipment Section (RSES) of the Savannah River Technology Center has developed a High Temperature Inspection System (HTIS) for remotely viewing the interior of the Defense Waste Processing Facility (DWPF) melter pour spout. The DWPF is a vitrification facility at the Savannah River Site where radioactive waste is processed, mixed and melted with glass frit in an electrically heated melter, and poured into canisters for long-term storage. The glass mixture is transferred from the melter to the canisters via the pour spout, a vertical interface between the melter and the canisters. During initial operation of the melter, problems were experienced with wicking of the glass stream to the sides of the pour spout resulting in pluggage of the pour spout. A removable insert was developed to eliminate the wicking problem. Routine cleaning of the pour spout and replacement of the insert requires that the pour spout interior be inspected on a regular basis. The HTIS was developed to perform the inspection. The HTIS provides two video images: one view for aligning the HTIS with the pour spout and the other for inspecting the pour spout wall condition and other surfaces. The HTIS is carried into the melter cell using an overhead crane and is remotely connected to the cell's telerobotic manipulator (TRM). An operator uses the TRM to insert the HTIS into the 2-inch (5.08 cm) diameter pour spout, rotate it 360 degrees, and then remove it. This application created many challenges for the inspection device, especially regarding size and temperature. The HTIS design allows the video cameras to stay below a safe operating temperature during use in the 1100 degrees C environment. Many devices are designed to penetrate a wall and extend into a heated chamber only a few inches, but the HTIS is inserted into the heated chamber 22 inches (55.88 cm). Other devices can handle the insertion length and small diameter, but they are not designed to handle the high

  4. Automated visual inspection of an airplane exterior

    NASA Astrophysics Data System (ADS)

    Jovančević, Igor; Orteu, Jean-José; Sentenac, Thierry; Gilblas, Rémi

    2015-04-01

    This paper deals with the inspection of an airplane using a Pan-Tilt-Zoom camera mounted on a mobile robot moving around the airplane. We present image processing methods for detection and inspection of four different types of items on the airplane exterior. Our detection approach is focused on the regular shapes such as rounded corner rectangles and ellipses, while inspection relies on clues such as uniformity of isolated image regions, convexity of segmented shapes and periodicity of the image intensity signal. The initial results are promising and demonstrate the feasibility of the envisioned robotic system.

  5. Caldecott 4th bore tunnel project: influence of ground water flows and inflows triggered by tectonic fault zones?

    NASA Astrophysics Data System (ADS)

    Neuhuber, G.; G. Neuhuber1, W. Klary1, A. Nitschke1, B. Thapa2, Chris Risden3, T. Crampton4, D. Zerga5

    2011-12-01

    The 4th Bore is a highway tunnel on California State Route 24 currently under construction. The 4th Bore is undertaken by the California State Department of Transportation (CALTRANS) and the Contra Costa County Transportation Commission (CCTC) to alleviate traffic congestion on SR24 connecting the cities of Oakland and Orinda in the San Francisco East Bay Area. The cost for the 4th Bore is estimated at $ 390.8 Mill. The 3,249 ft long 4th Bore tunnel will have excavated dimensions of approximately 40 ft height and 49 ft width. A total of 7 cross passages will run between the 3rd and the new 4th bore. Geology and Hydrogeology: The project is located in the Oakland Berkeley Hills of the SF Bay Area. The Caldecott Tunnels lie within the easterly assemblage of the Hayward fault zone province which consists of a sequence of sedimentary and volcanic rocks that accumulated in the interval between about 16 and 8.4 Ma (Miocene). The basal rocks of these Tertiary deposits consist of deep marine basin sediments of the Monterey Group. These rocks are overlain uncomfortably by an interbedded sequence of terrestrial sediments (Orinda Formation) and volcanic rocks (Moraga Formation). The Tertiary rocks have been folded into large amplitude, NW trending folds that are cut by N trending strike and slip faults. The SF Bay Region, which is crossed by 4 major faults (San Gregorio, San Andreas, Hayward, and Calaveras), is considered one of the more seismically active regions of the world. The active Hayward fault lies 0.9mi to the west of the Caldecott Tunnels and is the closest major fault to the project area. The tunnel is at the moment under top heading construction: West Portal (360ft) and East Portal (1,968.5ft). While major faults typically influence groundwater flow, characterization of such influences is extremely difficult because of the heterogeneity of the hydraulic systems and the different lithological parameters and influences. Four major inactive fault zones striking

  6. Production of IL-16 correlates with CD4+ Th1 inflammation and phosphorylation of axonal cytoskeleton in multiple sclerosis lesions

    PubMed Central

    Skundric, Dusanka S; Cai, Juan; Cruikshank, William W; Gveric, Djordje

    2006-01-01

    Background Multiple sclerosis (MS) is a central nervous system-specific autoimmune, demyelinating and neurodegenerative disease. Infiltration of lesions by autoaggressive, myelin-specific CD4+Th1 cells correlates with clinical manifestations of disease. The cytokine IL-16 is a CD4+ T cell-specific chemoattractant that is biased towards CD4+ Th1 cells. IL-16 precursor is constitutively expressed in lymphocytes and during CD4+ T cell activation; active caspase-3 cleaves and releases C-terminal bioactive IL-16. Previously, we used an animal model of MS to demonstrate an important role for IL-16 in regulation of autoimmune inflammation and subsequent axonal damage. This role of IL-16 in MS is largely unexplored. Here we examine the regulation of IL-16 in relation to CD4+ Th1 infiltration and inflammation-related changes of axonal cytoskeleton in MS lesions. Methods We measured relative levels of IL-16, active caspase-3, T-bet, Stat-1 (Tyr 701), and phosphorylated NF(M+H), in brain and spinal cord lesions from MS autopsies, using western blot analysis. We examined samples from 39 MS cases, which included acute, subacute and chronic lesions, as well as adjacent, normal-appearing white and grey matter. All samples were taken from patients with relapsing remitting clinical disease. We employed two-color immunostaining and confocal microscopy to identify phenotypes of IL-16-containing cells in frozen tissue sections from MS lesions. Results We found markedly increased levels of pro- and secreted IL-16 (80 kD and 22 kD, respectively) in MS lesions compared to controls. Levels of IL-16 peaked in acute, diminished in subacute, and were elevated again in chronic active lesions. Compared to lesions, lower but still appreciable IL-6 levels were measured in normal-appearing white matter adjacent to active lesions. Levels of IL-16 corresponded to increases in active-caspase-3, T-bet and phosphorylated Stat-1. In MS lesions, we readily observed IL-16 immunoreactivity confined to

  7. 4th Quarter Transportation Report FY 2014: Radioactive Waste Shipments to and from the Nevada National Security Site (NNSS)

    SciTech Connect

    Gregory, Louis

    2014-12-02

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to and from the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. There was one shipment of two drums sent for offsite treatment and disposal. This report summarizes the 4th quarter of Fiscal Year (FY) 2014 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. This report also includes annual summaries for FY 2014.

  8. Regularized Structural Equation Modeling

    PubMed Central

    Jacobucci, Ross; Grimm, Kevin J.; McArdle, John J.

    2016-01-01

    A new method is proposed that extends the use of regularization in both lasso and ridge regression to structural equation models. The method is termed regularized structural equation modeling (RegSEM). RegSEM penalizes specific parameters in structural equation models, with the goal of creating easier to understand and simpler models. Although regularization has gained wide adoption in regression, very little has transferred to models with latent variables. By adding penalties to specific parameters in a structural equation model, researchers have a high level of flexibility in reducing model complexity, overcoming poor fitting models, and the creation of models that are more likely to generalize to new samples. The proposed method was evaluated through a simulation study, two illustrative examples involving a measurement model, and one empirical example involving the structural part of the model to demonstrate RegSEM’s utility. PMID:27398019

  9. Collaborative interactions between type 2 innate lymphoid cells and antigen-specific CD4+ Th2 cells exacerbate murine allergic airway diseases with prominent eosinophilia.

    PubMed

    Liu, Bo; Lee, Jee-Boong; Chen, Chun-Yu; Hershey, Gurjit K Khurana; Wang, Yui-Hsi

    2015-04-15

    Type-2 innate lymphoid cells (ILC2s) and the acquired CD4(+) Th2 and Th17 cells contribute to the pathogenesis of experimental asthma; however, their roles in Ag-driven exacerbation of chronic murine allergic airway diseases remain elusive. In this study, we report that repeated intranasal rechallenges with only OVA Ag were sufficient to trigger airway hyperresponsiveness, prominent eosinophilic inflammation, and significantly increased serum OVA-specific IgG1 and IgE in rested mice that previously developed murine allergic airway diseases. The recall response to repeated OVA inoculation preferentially triggered a further increase of lung OVA-specific CD4(+) Th2 cells, whereas CD4(+) Th17 and ILC2 cell numbers remained constant. Furthermore, the acquired CD4(+) Th17 cells in Stat6(-/-)/IL-17-GFP mice, or innate ILC2s in CD4(+) T cell-ablated mice, failed to mount an allergic recall response to OVA Ag. After repeated OVA rechallenge or CD4(+) T cell ablation, the increase or loss of CD4(+) Th2 cells resulted in an enhanced or reduced IL-13 production by lung ILC2s in response to IL-25 and IL-33 stimulation, respectively. In return, ILC2s enhanced Ag-mediated proliferation of cocultured CD4(+) Th2 cells and their cytokine production, and promoted eosinophilic airway inflammation and goblet cell hyperplasia driven by adoptively transferred Ag-specific CD4(+) Th2 cells. Thus, these results suggest that an allergic recall response to recurring Ag exposures preferentially triggers an increase of Ag-specific CD4(+) Th2 cells, which facilitates the collaborative interactions between acquired CD4(+) Th2 cells and innate ILC2s to drive the exacerbation of a murine allergic airway diseases with an eosinophilic phenotype. PMID:25780046

  10. Krein regularization of QED

    NASA Astrophysics Data System (ADS)

    Forghan, B.; Takook, M. V.; Zarei, A.

    2012-09-01

    In this paper, the electron self-energy, photon self-energy and vertex functions are explicitly calculated in Krein space quantization including quantum metric fluctuation. The results are automatically regularized or finite. The magnetic anomaly and Lamb shift are also calculated in the one loop approximation in this method. Finally, the obtained results are compared to conventional QED results.

  11. Geometry of spinor regularization

    NASA Technical Reports Server (NTRS)

    Hestenes, D.; Lounesto, P.

    1983-01-01

    The Kustaanheimo theory of spinor regularization is given a new formulation in terms of geometric algebra. The Kustaanheimo-Stiefel matrix and its subsidiary condition are put in a spinor form directly related to the geometry of the orbit in physical space. A physically significant alternative to the KS subsidiary condition is discussed. Derivations are carried out without using coordinates.

  12. An Ecological Study of Food Desert Prevalence and 4th Grade Academic Achievement in New York State School Districts

    PubMed Central

    Frndak, Seth E.

    2014-01-01

    Background This ecological study examines the relationship between food desert prevalence and academic achievement at the school district level. Design and methods Sample included 232 suburban and urban school districts in New York State. Multiple open-source databases were merged to obtain: 4th grade science, English and math scores, school district demographic composition (NYS Report Card), regional socioeconomic indicators (American Community Survey), school district quality (US Common Core of Data), and food desert data (USDA Food Desert Atlas). Multiple regression models assessed the percentage of variation in achievement scores explained by food desert variables, after controlling for additional predictors. Results The proportion of individuals living in food deserts significantly explained 4th grade achievement scores, after accounting for additional predictors. School districts with higher proportions of individuals living in food desert regions demonstrated lower 4th grade achievement across science, English and math. Conclusions Food deserts appear to be related to academic achievement at the school district level among urban and suburban regions. Further research is needed to better understand how food access is associated with academic achievement at the individual level. Significance for public health The prevalence of food deserts in the United States is of national concern. As poor nutrition in United States children continues to spark debate, food deserts are being evaluated as potential sources of low fruit and vegetable intake and high obesity rates. Cognitive development and IQ have been linked to nutrition patterns, suggesting that children in food desert regions may have a disadvantage academically. This research evaluates if an ecological relationship between food desert prevalence and academic achievement at the school district level can be demonstrated. Results suggest that food desert prevalence may relate to poor academic performance at

  13. Inspection and Emotion

    ERIC Educational Resources Information Center

    Perryman, Jane

    2007-01-01

    In this paper I explore the emotional impact of inspection on the staff of a school in the two years between Ofsted inspections. Using data from one school undergoing inspection, I argue that the negative emotional impact of inspection of teachers goes beyond the oft-reported issues of stress and overwork. Teachers experience a loss of power and…

  14. Medical Standby: An Experience at the 4th National Youth Camping and Motivation Program Organized by Maksak Malaysia

    PubMed Central

    Zakaria, Mohd Idzwan; Isa, Ridzuan Mohd; Shah Che Hamzah, Mohd Shaharudin; Ayob, Noor Azleen

    2006-01-01

    Medical standby is the provision of emergency medical care and first aid for participants and/or spectators in a pre-planned event. This article describes the framework and the demographics of a medical standby at the 4th National Youth Camping and Motivation Program in Pasir Puteh, Kelantan from 30th July until the 3rd August 2004. The framework of the medical team is described based on the work process of any medical stand by. A medical encounter form was created for the medical standby defining the type of case seen (medical or trauma), name, age, race and diagnosis of the patient. We concluded that interagency collaboration during the initial planning and during the event itself is needed to ensure the smooth running of the medical standby. Most of the medical encounters were minor illnesses which are similar to previous studies and there was no case transferred to the hospital during that period. PMID:22589590

  15. Medical Standby: An Experience at the 4(th) National Youth Camping and Motivation Program Organized by Maksak Malaysia.

    PubMed

    Zakaria, Mohd Idzwan; Isa, Ridzuan Mohd; Shah Che Hamzah, Mohd Shaharudin; Ayob, Noor Azleen

    2006-01-01

    Medical standby is the provision of emergency medical care and first aid for participants and/or spectators in a pre-planned event. This article describes the framework and the demographics of a medical standby at the 4(th) National Youth Camping and Motivation Program in Pasir Puteh, Kelantan from 30(th) July until the 3(rd) August 2004. The framework of the medical team is described based on the work process of any medical stand by. A medical encounter form was created for the medical standby defining the type of case seen (medical or trauma), name, age, race and diagnosis of the patient. We concluded that interagency collaboration during the initial planning and during the event itself is needed to ensure the smooth running of the medical standby. Most of the medical encounters were minor illnesses which are similar to previous studies and there was no case transferred to the hospital during that period. PMID:22589590

  16. Macracanthorhynchus hirudinaceus Eggs in Canine Coprolite from the Sasanian Era in Iran (4(th)/5(th) Century CE).

    PubMed

    Mowlavi, Gholamreza; Makki, Mahsasadat; Heidari, Zahra; Rezaeian, Mostafa; Mohebali, Mehdi; Araujo, Adauto; Boenke, Nicole; Aali, Abolfazl; Stollner, Thomas; Mobedi, Iraj

    2015-01-01

    Present paper is the second publication introducing the paleoparasitological findings from animal coprolites obtained from archeological site of Chehrabad salt mine in northwestern Iran. The current archeological site is located in northwest of Iran, dated to the Sassanian Era (4(th)/5(th) century CE). In the summer 2012 the carnivore coprolite was obtained within the layers in the mine and were thoroughly analyzed for parasites using TSP rehydration technique. Eggs of 0 were successfully retrieved from the examined coprolite and were confidently identified based on reliable references. Identifying of M. hirudinaceus eggs in paleofeces with clear appearance as demonstrated herein, is much due to appropriate preservation condition has been existed in the salt mine .The present finding could be regarded as the oldest acanthocephalan infection in Iran. PMID:26246822

  17. Macracanthorhynchus hirudinaceus Eggs in Canine Coprolite from the Sasanian Era in Iran (4th/5th Century CE)

    PubMed Central

    MOWLAVI, Gholamreza; MAKKI, Mahsasadat; HEIDARI, Zahra; REZAEIAN, Mostafa; MOHEBALI, Mehdi; ARAUJO, Adauto; BOENKE, Nicole; AALI, Abolfazl; STOLLNER, Thomas; MOBEDI, Iraj

    2015-01-01

    Present paper is the second publication introducing the paleoparasitological findings from animal coprolites obtained from archeological site of Chehrabad salt mine in northwestern Iran. The current archeological site is located in northwest of Iran, dated to the Sassanian Era (4th/5th century CE). In the summer 2012 the carnivore coprolite was obtained within the layers in the mine and were thoroughly analyzed for parasites using TSP rehydration technique. Eggs of 0 were successfully retrieved from the examined coprolite and were confidently identified based on reliable references. Identifying of M. hirudinaceus eggs in paleofeces with clear appearance as demonstrated herein, is much due to appropriate preservation condition has been existed in the salt mine .The present finding could be regarded as the oldest acanthocephalan infection in Iran. PMID:26246822

  18. [Guideline for the additional test positions according to the EPQC 4th Edition for Digital Mammography Systems].

    PubMed

    Sommer, A; Lenzen, H; Blaser, D; Ehlers, S-E; Schopphoven, S; John, C

    2009-09-01

    Within the physical-technical quality assurance of the German breast cancer screening program all digital mammography systems have to perform the contrast resolution test and the determination of the average glandular dose based on the European guidelines for quality assurance in breast cancer screening and diagnosis (4th Edition). Since 1.1.2009 this applies to digital systems outside the screening program too. To accomplish uniform measurements in all federal states of Germany, the physical board of the reference centers developed together a special guideline for these test position. This Guideline describes the determination of the average glandular dose for different types of mammography systems, the CDMAM image acquisition and the CDMAM image evaluation as well. This guideline was verified by the German task group "Röntgenverordnung". PMID:19676011

  19. Neurobehavioral Evaluation System (NES): comparative performance of 2nd-, 4th-, and 8th-grade Czech children.

    PubMed

    Otto, D A; Skalik, I; House, D E; Hudnell, H K

    1996-01-01

    The Neurobehavioral Evaluation System was designed for field studies of workers, but many NES tests can be performed satisfactorily by children as young as 7 or 8 years old and a few tests, such as simple reaction time, can be performed by preschool children. However, little comparative data from children of different ages or grade levels are available. Studies of school children in the Czech Republic indicate that 2nd-grade children could perform the following NES tests satisfactorily: Finger Tapping, Visual Digit Span. Continuous Performance, Symbol-Digit Substitution, Pattern Comparison, and simpler conditions of Switching Attention. Comparative scores of boys and girls from the 2nd, 4th, and 8th grades and power analyses to estimate appropriate sample size were presented. Performance varied systematically with grade level and gender. Larger samples were needed with younger children to achieve comparable levels of statistical power. Gender comparisons indicated that boys responded faster, but made more errors than girls. PMID:8866533

  20. The influence of neighborhood density and word frequency on phoneme awareness in 2nd and 4th grades

    PubMed Central

    Hogan, Tiffany P.; Bowles, Ryan P.; Catts, Hugh W.; Storkel, Holly L.

    2010-01-01

    Purpose The purpose of this study was to test the hypothesis that two lexical characteristics – neighborhood density and word frequency – interact to influence performance on phoneme awareness tasks. Methods Phoneme awareness was examined in a large, longitudinal dataset of 2nd and 4th grade children. Using linear logistic test model, the relation between words' neighborhood density, word frequency, and phoneme awareness performance was examined across grades while covarying type and place of deletion. Results A predicted interaction was revealed: words from dense neighborhoods or those with high frequency were more likely to yield correct phoneme awareness responses across grades. Conclusions Findings support an expansion to the lexical restructuring model to include interactions between neighborhood density and word frequency to account for phoneme awareness. PMID:20691979

  1. 4th Annual Conference for African-American Researchers in the Mathematical Sciences (CAARMS4). Preliminary Program

    SciTech Connect

    Tapia, Richard

    1998-06-01

    In June, The Center for Research on Parallel Computation (CRPC), an NSF-funded Science and Technology Center, hosted the 4th Annual Conference for African-American Reserachers in the Mathematical Sciences (CAARMS4) at Rice University. The main goal of this conference was to highlight current work by African-American researchers and graduate students in mathematics. This conference strengthened the mathematical sciences by encouraging the increased participation of African-American and underrepresented groups into the field, facilitating working relationships between them and helping to cultivate their careers. In addition to the talks there was a graduate student poster session and tutorials on topics in mathematics and computer science. These talks, presentations, and discussions brought a broader perspective to the critical issues involving minority participation in mathematics.

  2. [A development of Byzantine Christian charities during the 4(th)-7(th) centuries and the birth of the hospital].

    PubMed

    Nam, Sung Hyun

    2015-04-01

    This study aims to examine the beginning and the development of Christian Charities during the 4(th)-6(th) centuries which would eventually result in the birth of the hospital in modern sense in the first half of the 7(th) century. For this purpose, I looked carefully into various primary sources concerning the early Christian institutions for the poor and the sick. Above all, it's proper to note that the first xenodocheion where hospitality was combined with a systematic caring, is concerned with the Trinitarian debate of the 4(th) century. In 356, Eustathios, one of the leaders of homoiousios group, established xenodocheion to care for the sick and the lepers in Sebaste of Armenia, whereas his opponent Aetios, doctor and leader of the heteroousios party, was reckoned to have combined the medical treatment with his clerical activities. Then, Basil of Caesarea, disciple of Eustathios of Sebaste, also founded in 372 a magnificent benevolent complex named 'Basileias' after its founder. I scrupulously analysed several contemporary materials mentioning the charitable institution of Caesarea which was called alternatively katagogia, ptochotropheion, xenodocheion. John Chrysostome also founded several nosokomeia in Constantinople at the end of the 4(th) century and the beginning of the 5(th) century. Apparently, the contemporary sources mention that doctors existed for these Charities, but there is no sufficient proof that these 'Christian Hospitals,' Basileias or nosokomeia of Constantinople were hospitals in modern sense. Imperial constitutions began to mention ptochotropheion, xenodocheion and orphanotropheion since the second half of the 5(th) century and then some Justinian laws evoked nosokomium, brephotrophia, gerontocomia. These laws reveal that 'Christian Hospitals' were well clarified and deeply rooted in Byzantine society already in these periods. And then, new benevolent institutions emerged in the 6(th) century: nosokomeia for a specific class and

  3. Piping inspection instrument carriage

    SciTech Connect

    Zollinger, W.T.; Treanor, R.C.

    1993-09-20

    This invention is comprised of a pipe inspection instrument carriage for use with a pipe crawler or other locomotion means for performing internal inspections of piping surfaces. The carriage has a front leg assembly, a rear leg assembly and a central support connecting the two assemblies and for mounting an instrument arm having inspection instruments. The instrument arm has means mounted distally thereon for axially aligning the inspection instrumentation and means for extending the inspection instruments radially outward to operably position the inspection instruments on the piping interior. Also, the carriage has means for rotating the central support and the front leg assembly with respect to the rear leg assembly so that the inspection instruments azimuthally scan the piping interior. The instrument carriage allows performance of all piping inspection operations with a minimum of moving parts, thus decreasing the likelihood of performance failure.

  4. Communicating Science to Impact Learning? A Phenomenological Inquiry into 4th and 5th Graders' Perceptions of Science Information Sources

    NASA Astrophysics Data System (ADS)

    Gelmez Burakgazi, Sevinc; Yildirim, Ali; Weeth Feinstein, Noah

    2016-04-01

    Rooted in science education and science communication studies, this study examines 4th and 5th grade students' perceptions of science information sources (SIS) and their use in communicating science to students. It combines situated learning theory with uses and gratifications theory in a qualitative phenomenological analysis. Data were gathered through classroom observations and interviews in four Turkish elementary schools. Focus group interviews with 47 students and individual interviews with 17 teachers and 10 parents were conducted. Participants identified a wide range of SIS, including TV, magazines, newspapers, internet, peers, teachers, families, science centers/museums, science exhibitions, textbooks, science books, and science camps. Students reported using various SIS in school-based and non-school contexts to satisfy their cognitive, affective, personal, and social integrative needs. SIS were used for science courses, homework/project assignments, examination/test preparations, and individual science-related research. Students assessed SIS in terms of the perceived accessibility of the sources, the quality of the content, and the content presentation. In particular, some sources such as teachers, families, TV, science magazines, textbooks, and science centers/museums ("directive sources") predictably led students to other sources such as teachers, families, internet, and science books ("directed sources"). A small number of sources crossed context boundaries, being useful in both school and out. Results shed light on the connection between science education and science communication in terms of promoting science learning.

  5. Identification of DRG-1 As a Melanoma-Associated Antigen Recognized by CD4+ Th1 Cells

    PubMed Central

    Kiniwa, Yukiko; Li, Jiang; Wang, Mingjun; Sun, Chuang; Lee, Jeffrey E.; Wang, Rong-Fu; Wang, Helen Y.

    2015-01-01

    Immunotherapy has emerged as a promising strategy for the treatment of metastatic melanoma. Clinical studies have demonstrated the feasibility of cancer immunotherapy using tumor antigens recognized by CD8+ T cells. However, the overall immune responses induced by these antigens are too weak and transient to induce tumor regression in the majority of patients who received immunization. A growing body of evidence suggests that CD4+ T helper (Th) cells play an important role in antitumor immunity. Therefore, the identification of MHC class II-restricted tumor antigens capable of stimulating CD4+ T cells may provide opportunities for developing effective cancer vaccines. To this end, we describe the identification of developmentally regulated GTP-binding protein 1 (DRG-1) as a melanoma-associated antigen recognized by HLA-DR11-restricted CD4+ Th1 cells. Epitope mapping analysis showed that the DRG1248-268 epitope of DRG-1 was required for T cell recognition. Reverse transcription-polymerase chain reaction revealed that DRG-1 was highly expressed in melanoma cell lines but not in normal tissues. DRG-1 knockdown by lentiviral-based shRNA suppressed melanoma cell proliferation and soft agar colony formation. Taken together, these data suggest that DRG-1 plays an important role in melanoma cell growth and transformation, indicating that DRG1 may represent a novel target for CD4+ T cell-mediated immunotherapy in melanoma. PMID:25993655

  6. Meeting report: 4th ISIRV antiviral group conference: Novel antiviral therapies for influenza and other respiratory viruses.

    PubMed

    McKimm-Breschkin, Jennifer L; Fry, Alicia M

    2016-05-01

    The International Society for Influenza and other Respiratory Virus Diseases (isirv) held its 4th Antiviral Group Conference at the University of Texas on 2-4 June, 2015. With emerging resistance to the drugs currently licensed for treatment and prophylaxis of influenza viruses, primarily the neuraminidase inhibitor oseltamivir phosphate (Tamiflu) and the M2 inhibitors amantadine and rimantadine, and the lack of effective interventions against other respiratory viruses, the 3-day programme focused on the discovery and development of inhibitors of several virus targets and key host cell factors involved in virus replication or mediating the inflammatory response. Virus targets included the influenza haemagglutinin, neuraminidase and M2 proteins, and both the respiratory syncytial virus and influenza polymerases and nucleoproteins. Therapies for rhinoviruses and MERS and SARS coronaviruses were also discussed. With the emerging development of monoclonal antibodies as therapeutics, the potential implications of antibody-dependent enhancement of disease were also addressed. Topics covered all aspects from structural and molecular biology to preclinical and clinical studies. The importance of suitable clinical trial endpoints and regulatory issues were also discussed from the perspectives of both industry and government. This meeting summary provides an overview, not only for the conference participants, but also for those interested in the current status of antivirals for respiratory viruses. PMID:26872862

  7. Quality of Education Predicts Performance on the Wide Range Achievement Test-4th Edition Word Reading Subtest

    PubMed Central

    Sayegh, Philip; Arentoft, Alyssa; Thaler, Nicholas S.; Dean, Andy C.; Thames, April D.

    2014-01-01

    The current study examined whether self-rated education quality predicts Wide Range Achievement Test-4th Edition (WRAT-4) Word Reading subtest and neurocognitive performance, and aimed to establish this subtest's construct validity as an educational quality measure. In a community-based adult sample (N = 106), we tested whether education quality both increased the prediction of Word Reading scores beyond demographic variables and predicted global neurocognitive functioning after adjusting for WRAT-4. As expected, race/ethnicity and education predicted WRAT-4 reading performance. Hierarchical regression revealed that when including education quality, the amount of WRAT-4's explained variance increased significantly, with race/ethnicity and both education quality and years as significant predictors. Finally, WRAT-4 scores, but not education quality, predicted neurocognitive performance. Results support WRAT-4 Word Reading as a valid proxy measure for education quality and a key predictor of neurocognitive performance. Future research should examine these findings in larger, more diverse samples to determine their robust nature. PMID:25404004

  8. Quality of education predicts performance on the Wide Range Achievement Test-4th Edition Word Reading subtest.

    PubMed

    Sayegh, Philip; Arentoft, Alyssa; Thaler, Nicholas S; Dean, Andy C; Thames, April D

    2014-12-01

    The current study examined whether self-rated education quality predicts Wide Range Achievement Test-4th Edition (WRAT-4) Word Reading subtest and neurocognitive performance, and aimed to establish this subtest's construct validity as an educational quality measure. In a community-based adult sample (N = 106), we tested whether education quality both increased the prediction of Word Reading scores beyond demographic variables and predicted global neurocognitive functioning after adjusting for WRAT-4. As expected, race/ethnicity and education predicted WRAT-4 reading performance. Hierarchical regression revealed that when including education quality, the amount of WRAT-4's explained variance increased significantly, with race/ethnicity and both education quality and years as significant predictors. Finally, WRAT-4 scores, but not education quality, predicted neurocognitive performance. Results support WRAT-4 Word Reading as a valid proxy measure for education quality and a key predictor of neurocognitive performance. Future research should examine these findings in larger, more diverse samples to determine their robust nature. PMID:25404004

  9. Advances in Urea cycle Neuroimaging: Proceedings from the 4th International symposium on Urea cycle disorders, Barcelona, Spain, September 2013

    PubMed Central

    Pacheco-Colon, Ileana; Fricke, Stanley; VanMeter, John; Gropman, M.D.

    2014-01-01

    Our previous imaging research performed as part of a Urea Cycle Rare Disorders Consortium (UCRDC) grant, has identified specific biomarkers of neurologic injury in ornithine transcarbamylase deficiency, OTCD. While characterization of mutations can be achieved in most cases, this information does not necessarily predict the severity of the underlying neurological syndrome. The biochemical consequences of any mutation may be modified additionally by a large number of factors, including contributions of other enzymes and transport systems that mediate flux through the urea cycle, diet and other environmental factors. These factors likely vary from one patient to another, and they give rise to heterogeneity of clinical severity. Affected cognitive domains include non-verbal learning, fine motor processing, reaction time, visual memory, attention, and executive function. Deficits in these capacities may be seen in symptomatic patients, as well as asymptomatic carriers with normal IQ and correlate with variances in brain structure and function in these patients. Using neuroimaging we can identify biomarkers that reflect the downstream impact of UCDs on cognition. This manuscript is a summary of the presentation from the 4th International Consortium on Urea cycle disorders held in, Barcelona, Spain, September 2, 2014. PMID:25066103

  10. Electronic Inspection of Beef

    NASA Technical Reports Server (NTRS)

    Anselmo, Victor J.; Gammell, Paul M.; Clark, Jerry

    1987-01-01

    Two proposed methods for grading beef quality based on inspection by electronic equipment: one method uses television camera to generate image of a cut of beef as customer sees it; other uses ultrasonics to inspect live animal or unsliced carcasses. Both methods show promise for automated meat inspection.

  11. Software Formal Inspections Guidebook

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

  12. Software Formal Inspections Standard

    NASA Technical Reports Server (NTRS)

    1993-01-01

    This Software Formal Inspections Standard (hereinafter referred to as Standard) is applicable to NASA software. This Standard defines the requirements that shall be fulfilled by the software formal inspections process whenever this process is specified for NASA software. The objective of this Standard is to define the requirements for a process that inspects software products to detect and eliminate defects as early as possible in the software life cycle. The process also provides for the collection and analysis of inspection data to improve the inspection process as well as the quality of the software.

  13. Benefits of a 4th Ice Class in the Simulated Radar Reflectivities of Convective Systems Using a Bulk Microphysics Scheme

    NASA Technical Reports Server (NTRS)

    Lang, Stephen E.; Tao, Wei-Kuo; Chern, Jiun-Dar; Wu, Di; Li, Xiaowen

    2015-01-01

    Numerous cloud microphysical schemes designed for cloud and mesoscale models are currently in use, ranging from simple bulk to multi-moment, multi-class to explicit bin schemes. This study details the benefits of adding a 4th ice class (hail) to an already improved 3-class ice bulk microphysics scheme developed for the Goddard Cumulus Ensemble model based on Rutledge and Hobbs (1983,1984). Besides the addition and modification of several hail processes from Lin et al. (1983), further modifications were made to the 3-ice processes, including allowing greater ice super saturation and mitigating spurious evaporationsublimation in the saturation adjustment scheme, allowing graupelhail to become snow via vapor growth and hail to become graupel via riming, and the inclusion of a rain evaporation correction and vapor diffusivity factor. The improved 3-ice snowgraupel size-mapping schemes were adjusted to be more stable at higher mixing rations and to increase the aggregation effect for snow. A snow density mapping was also added. The new scheme was applied to an intense continental squall line and a weaker, loosely-organized continental case using three different hail intercepts. Peak simulated reflectivities agree well with radar for both the intense and weaker case and were better than earlier 3-ice versions when using a moderate and large intercept for hail, respectively. Simulated reflectivity distributions versus height were also improved versus radar in both cases compared to earlier 3-ice versions. The bin-based rain evaporation correction affected the squall line case more but did not change the overall agreement in reflectivity distributions.

  14. Breakfast patterns among low-income, ethnically-diverse 4th-6th grade children in an urban area

    PubMed Central

    2014-01-01

    Background Increasing school breakfast participation has been advocated as a method to prevent childhood obesity. However, little is known about children’s breakfast patterns outside of school (e.g., home, corner store). Policies that increase school breakfast participation without an understanding of children’s breakfast habits outside of school may result in children consuming multiple breakfasts and may undermine efforts to prevent obesity. The aim of the current study was to describe morning food and drink consumption patterns among low-income, urban children and their associations with relative weight. Methods A cross-sectional analysis was conducted of data obtained from 651 4th-6th graders (51.7% female, 61.2% African American, 10.7 years) in 2012. Students completed surveys at school that included all foods eaten and their locations that morning. Height and weight were measured by trained research staff. Results On the day surveyed, 12.4% of youth reported not eating breakfast, 49.8% reported eating one breakfast, 25.5% reported eating two breakfasts, and 12.3% reported eating three or more breakfasts. The number of breakfasts consumed and BMI percentile showed a significant curvilinear relationship, with higher mean BMI percentiles observed among children who did not consume any breakfast and those who consumed ≥ 3 breakfasts. Sixth graders were significantly less likely to have consumed breakfast compared to younger children. A greater proportion of obese youth had no breakfast (18.0%) compared to healthy weight (10.1%) and overweight youth (10.7%, p = .01). Conclusions When promoting school breakfast, policies will need to be mindful of both over- and under-consumption to effectively address childhood obesity and food insecurity. Clinical trial registration NCT01924130 from http://clinicaltrials.gov/. PMID:24928474

  15. Autism: Proceedings of Annual Meeting of the National Society for Autistic Children (4th, June 22-24, 1972, Flint Michigan).

    ERIC Educational Resources Information Center

    National Society for Autistic Children, Syracuse, NY.

    Presented are proceedings of the 4th annual (1972) meeting of the National Society for Autistic Children including 11 papers given at the meeting. Listed are officers and board members of the society, the convention committee members, and recipients of citations and awards. The president's report notes past goals, accomplishments, and future…

  16. Examining Differentiation and Utilization of iPads across Content Areas in an Independent, PreK-4th Grade Elementary School

    ERIC Educational Resources Information Center

    Milman, Natalie B.; Carlson-Bancroft, Angela; Vanden Boogart, Amy

    2014-01-01

    This mixed methods case study examined the implementation of a 1:1 iPad initiative in a suburban, co-educational, independent, preK-4th grade elementary school in the United States. This article focuses on how teachers used iPads to differentiate instruction and across multiple content areas. Findings show the processes by which teachers employed…

  17. An Assessment of 4th, 8th, and 11th Grade Students' Knowledge Related to Marine Science and Natural Resource Issues.

    ERIC Educational Resources Information Center

    Brody, Michael J.; Koch, Helmut

    In an effort to contribute information for science teachers and curriculum developers in Maine, this study generated base line data on 4th, 8th, and 11th grade students' knowledge of marine science and natural resources principles in relation to the Gulf of Maine. Five concept maps representing 15 major content principles were developed. Two…

  18. The Relationship of Values in Elementary School 4th Grade Social Studies Textbook with the Attainments and Their Level of Being Included in Student Workbooks

    ERIC Educational Resources Information Center

    Kilic, Abdurrahman

    2012-01-01

    In this study, the relationship of values in elementary school 4th grade Social Studies textbook with the attainments and their level of being included in student workbook are tried to be determined. Case study, which is a qualitative research method, was applied for this research. To collect data, document analysis technique, which is among the…

  19. The Effect of Direct Instruction Strategy on Math Achievement of Primary 4th and 5th Grade Students with Learning Difficulties

    ERIC Educational Resources Information Center

    Al-Makahleh, Ahmad Abdulhameed Aufan

    2011-01-01

    This study seeks to verify the effect of direct instruction strategy on Math achievment of students with learning difficulties in the fourth and fifth grade levels and measure the improvement in their attitudes to Mathematics. Sample consisted of sixty (60) students with Math learning difficulties attending 4th and 5th grade level resource rooms…

  20. Color Duplex Assessment of 4th and 5th Internal Mammary Artery Perforators: The Pedicles of the Medially Based Lower Pole Breast Flaps

    PubMed Central

    Abdel-Monem, Kareem; Elshahat, Ahmed; Abou-Gamrah, Sherif; Eldin Abol-Atta, Hossam; Abd Eltawab, Reda; Massoud, Karim

    2012-01-01

    Objective: Reconstruction of a breast after mastectomy using the contralateral lower pole breast flap is an appealing procedure because it uses the tissues that were going to be excised during reduction of the sound breast to achieve symmetry. Literature mentioned that these flaps are supplied by the lower internal mammary artery perforators (IMAPs) with no further details. The aim of this study was to determine the site, size, and number of the 4th and 5th IMAPs by using preoperative color Duplex ultrasound and intraoperative exploration. Method: Twenty breasts in 10 patients who presented for reduction mammoplasty were included in this study. Preoperative color duplex was used to determine IMAPs in the 4th and 5th intercostal spaces. These perforators were localized intraoperatively. Intravenous fluorescein injection was used to determine the perfusion of the lower pole breast flap on the basis of these perforators. Results: Statistically, the 4th IMAPs diameters were significantly larger than the 5th IMAPs diameters (P < .05). The lower pole breast flap was perfused through these perforators. Conclusion: Color Duplex ultrasound is an accurate tool to preoperatively determine the 4th and 5th IMAPs. PMID:22292100

  1. The Effect of the Conceptual Change Oriented Instruction through Cooperative Learning on 4th Grade Students' Understanding of Earth and Sky Concepts

    ERIC Educational Resources Information Center

    Celikten, Oksan; Ipekcioglu, Sevgi; Ertepinar, Hamide; Geban, Omer

    2012-01-01

    The purpose of this study was to compare the effectiveness of the conceptual change oriented instruction through cooperative learning (CCICL) and traditional science instruction (TI) on 4th grade students' understanding of earth and sky concepts and their attitudes toward earth and sky concepts. In this study, 56 fourth grade students from the…

  2. Meeting Materials for the 4th NRC Meeting on the Guidance for and the Review of EPA's Toxicological Assessment of Inorganic Arsenic

    EPA Science Inventory

    On December 2-3, 2015, the National Research Council (NRC) hosted the 4th meeting of the committee formed to peer review the draft IRIS assessment of inorganic arsenic. EPA presented background and overview materials during the public session on December 2nd. This information co...

  3. U.S. Dietary and Physical Activity Guideline Knowledge and Corresponding Behaviors among 4th and 5th Grade Students: A Multi-Site Pilot Study

    ERIC Educational Resources Information Center

    Bea, Jennifer W.; Martinez, Stephanie; Armstrong-Florian, Traci; Farrell, Vanessa; Martinez, Cathy; Whitmer, Evelyn; Hartz, Vern; Blake, Samuel; Nicolini, Ariana; Misner, Scottie

    2014-01-01

    Knowledge of U.S. dietary and physical activity recommendations and corresponding behaviors were surveyed among 4th and 5th graders in five Arizona counties to determine the need for related education in SNAP-Ed eligible schools. A <70% target response rate was the criterion. Participants correctly identified recommendations for: fruit, 20%;…

  4. Nation and Language: Modern Aspects of Socio-Linguistic Development. Proceedings of the 4th International Conference (Lithuania, October 21-22, 2010)

    ERIC Educational Resources Information Center

    Online Submission, 2010

    2010-01-01

    The 4th international conference "Nation and Language: Modern Aspects of Socio-Linguistic Development" continues an eight-year old tradition. The conference is organized by Kaunas University of Technology Panevezys Institute and aims to bring scientists and researchers together for a general scientific discussion on new trends in sociolinguistic,…

  5. Regularized Generalized Canonical Correlation Analysis

    ERIC Educational Resources Information Center

    Tenenhaus, Arthur; Tenenhaus, Michel

    2011-01-01

    Regularized generalized canonical correlation analysis (RGCCA) is a generalization of regularized canonical correlation analysis to three or more sets of variables. It constitutes a general framework for many multi-block data analysis methods. It combines the power of multi-block data analysis methods (maximization of well identified criteria) and…

  6. 75 FR 53966 - Regular Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-02

    ... CORPORATION Regular Meeting AGENCY: Farm Credit System Insurance Corporation Board. SUMMARY: Notice is hereby given of the regular meeting of the Farm Credit System Insurance Corporation Board (Board). DATE AND TIME: The meeting of the Board will be held at the offices of the Farm Credit Administration in...

  7. Regularly timed events amid chaos.

    PubMed

    Blakely, Jonathan N; Cooper, Roy M; Corron, Ned J

    2015-11-01

    We show rigorously that the solutions of a class of chaotic oscillators are characterized by regularly timed events in which the derivative of the solution is instantaneously zero. The perfect regularity of these events is in stark contrast with the well-known unpredictability of chaos. We explore some consequences of these regularly timed events through experiments using chaotic electronic circuits. First, we show that a feedback loop can be implemented to phase lock the regularly timed events to a periodic external signal. In this arrangement the external signal regulates the timing of the chaotic signal but does not strictly lock its phase. That is, phase slips of the chaotic oscillation persist without disturbing timing of the regular events. Second, we couple the regularly timed events of one chaotic oscillator to those of another. A state of synchronization is observed where the oscillators exhibit synchronized regular events while their chaotic amplitudes and phases evolve independently. Finally, we add additional coupling to synchronize the amplitudes, as well, however in the opposite direction illustrating the independence of the amplitudes from the regularly timed events. PMID:26651759

  8. A Brief Boot Camp for 4th-Year Medical Students Entering into Pediatric and Family Medicine Residencies

    PubMed Central

    Adler, Mark; Mangold, Karen; Trainor, Jennifer

    2016-01-01

    The transition from medical student to intern is a challenging process characterized by a steep learning curve. Focused courses targeting skills necessary for success as a resident have increased self-perceived preparedness, confidence, and medical knowledge. Our aim was to create a brief educational intervention for 4th-year medical students entering pediatric, family practice, and medicine/pediatric residencies to target skills necessary for an internship. The curriculum used a combination of didactic presentations, small group discussions, role-playing, facilitated debriefing, and simulation-based education. Participants completed an objective structured clinical exam requiring synthesis and application of multiple boot camp elements before and after the elective. Participants completed anonymous surveys assessing self-perceived preparedness for an internship, overall and in regards to specific skills, before the elective and after the course. Participants were asked to provide feedback about the course. Using checklists to assess performance, students showed an improvement in performing infant lumbar punctures (47.2% vs 77.0%; p < 0.01, 95% CI for the difference 0.2, 0.4%) and providing signout (2.5 vs. 3.9 (5-point scale) p < 0.01, 95% CI for the difference 0.6, 2.3). They did not show an improvement in communication with a parent. Participants demonstrated an increase in self-reported preparedness for all targeted skills, except for obtaining consults and interprofessional communication. There was no increase in reported overall preparedness. All participants agreed with the statements, “The facilitators presented the material in an effective manner,” “I took away ideas I plan to implement in internship,” and “I think all students should participate in a similar experience.” When asked to assess the usefulness of individual modules, all except order writing received a mean Likert score > 4. A focused boot camp addressing key knowledge and skills

  9. A Brief Boot Camp for 4th-Year Medical Students Entering into Pediatric and Family Medicine Residencies.

    PubMed

    Burns, Rebekah; Adler, Mark; Mangold, Karen; Trainor, Jennifer

    2016-01-01

    The transition from medical student to intern is a challenging process characterized by a steep learning curve. Focused courses targeting skills necessary for success as a resident have increased self-perceived preparedness, confidence, and medical knowledge. Our aim was to create a brief educational intervention for 4th-year medical students entering pediatric, family practice, and medicine/pediatric residencies to target skills necessary for an internship. The curriculum used a combination of didactic presentations, small group discussions, role-playing, facilitated debriefing, and simulation-based education. Participants completed an objective structured clinical exam requiring synthesis and application of multiple boot camp elements before and after the elective. Participants completed anonymous surveys assessing self-perceived preparedness for an internship, overall and in regards to specific skills, before the elective and after the course. Participants were asked to provide feedback about the course. Using checklists to assess performance, students showed an improvement in performing infant lumbar punctures (47.2% vs 77.0%; p < 0.01, 95% CI for the difference 0.2, 0.4%) and providing signout (2.5 vs. 3.9 (5-point scale) p < 0.01, 95% CI for the difference 0.6, 2.3). They did not show an improvement in communication with a parent. Participants demonstrated an increase in self-reported preparedness for all targeted skills, except for obtaining consults and interprofessional communication. There was no increase in reported overall preparedness. All participants agreed with the statements, "The facilitators presented the material in an effective manner," "I took away ideas I plan to implement in internship," and "I think all students should participate in a similar experience." When asked to assess the usefulness of individual modules, all except order writing received a mean Likert score > 4. A focused boot camp addressing key knowledge and skills required for

  10. PREFACE: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics

    NASA Astrophysics Data System (ADS)

    Khalili, N.; Valliappan, S.; Li, Q.; Russell, A.

    2010-07-01

    The use for mathematical models of natural phenomena has underpinned science and engineering for centuries, but until the advent of modern computers and computational methods, the full utility of most of these models remained outside the reach of the engineering communities. Since World War II, advances in computational methods have transformed the way engineering and science is undertaken throughout the world. Today, theories of mechanics of solids and fluids, electromagnetism, heat transfer, plasma physics, and other scientific disciplines are implemented through computational methods in engineering analysis, design, manufacturing, and in studying broad classes of physical phenomena. The discipline concerned with the application of computational methods is now a key area of research, education, and application throughout the world. In the early 1980's, the International Association for Computational Mechanics (IACM) was founded to promote activities related to computational mechanics and has made impressive progress. The most important scientific event of IACM is the World Congress on Computational Mechanics. The first was held in Austin (USA) in 1986 and then in Stuttgart (Germany) in 1990, Chiba (Japan) in 1994, Buenos Aires (Argentina) in 1998, Vienna (Austria) in 2002, Beijing (China) in 2004, Los Angeles (USA) in 2006 and Venice, Italy; in 2008. The 9th World Congress on Computational Mechanics is held in conjunction with the 4th Asian Pacific Congress on Computational Mechanics under the auspices of Australian Association for Computational Mechanics (AACM), Asian Pacific Association for Computational Mechanics (APACM) and International Association for Computational Mechanics (IACM). The 1st Asian Pacific Congress was in Sydney (Australia) in 2001, then in Beijing (China) in 2004 and Kyoto (Japan) in 2007. The WCCM/APCOM 2010 publications consist of a printed book of abstracts given to delegates, along with 247 full length peer reviewed papers published with

  11. Computer aided inspection qualification

    NASA Astrophysics Data System (ADS)

    McNab, D.; McNab, A.; Potts, A.; Toft, M.; McDonald, J.

    2002-05-01

    Inspection Qualification under the ENIQ methodology uses a Technical Justification as a key element in assuring the performance of the inspection. It combines a mixture of physical reasoning and modeling linked to limited experimental trial data from identified worst-case defects, but the qualification process is costly and time-consuming. This paper describes an investigation into providing an integrated set of intelligent software tools to aid the process of inspection qualification.

  12. Waste Inspection Tomography (WIT)

    SciTech Connect

    Bernardi, R.T.; Han, Kyung S.

    1994-11-01

    This article describes the Waste Inspection Tomography Program. The program provides an inspection system that offers the nuclear waste evaluator a unique combination of tools for regulatory-driven characterization of low-level waste, transuranic waste, and mixed waste drums. WIT provides nondestructive, noninvasive and environmentally safe inspections using x-ray and gamma ray technologies with reasonable cost and throughput. included are background information; project description; and results. 11 figs.

  13. Inline inspection of textured plastics surfaces

    NASA Astrophysics Data System (ADS)

    Michaeli, Walter; Berdel, Klaus

    2011-02-01

    This article focuses on the inspection of plastics web materials exhibiting irregular textures such as imitation wood or leather. They are produced in a continuous process at high speed. In this process, various defects occur sporadically. However, current inspection systems for plastics surfaces are able to inspect unstructured products or products with regular, i.e., highly periodic, textures, only. The proposed inspection algorithm uses the local binary pattern operator for texture feature extraction. For classification, semisupervised as well as supervised approaches are used. A simple concept for semisupervised classification is presented and applied for defect detection. The resulting defect-maps are presented to the operator. He assigns class labels that are used to train the supervised classifier in order to distinguish between different defect types. A concept for parallelization is presented allowing the efficient use of standard multicore processor PC hardware. Experiments with images of a typical product acquired in an industrial setting show a detection rate of 97% while achieving a false alarm rate below 1%. Real-time tests show that defects can be reliably detected even at haul-off speeds of 30 m/min. Further applications of the presented concept can be found in the inspection of other materials.

  14. Natural selection and mechanistic regularity.

    PubMed

    DesAutels, Lane

    2016-06-01

    In this article, I address the question of whether natural selection operates regularly enough to qualify as a mechanism of the sort characterized by Machamer, Darden, and Craver (2000). Contrary to an influential critique by Skipper and Millstein (2005), I argue that natural selection can be seen to be regular enough to qualify as an MDC mechanism just fine-as long as we pay careful attention to some important distinctions regarding mechanistic regularity and abstraction. Specifically, I suggest that when we distinguish between process vs. product regularity, mechanism-internal vs. mechanism-external sources of irregularity, and abstract vs. concrete regularity, we can see that natural selection is only irregular in senses that are unthreatening to its status as an MDC mechanism. PMID:26921876

  15. Optical fiber inspection system

    DOEpatents

    Moore, F.W.

    1985-04-05

    A remote optical inspection system including an inspection head. The inspection head has a passageway through which pellets or other objects are passed. A window is provided along the passageway through which light is beamed against the objects being inspected. A plurality of lens assemblies are arranged about the window so that reflected light can be gathered and transferred to a plurality of coherent optical fiber light guides. The light guides transfer the light images to a television or other image transducer which converts the optical images into a representative electronic signal. The electronic signal can then be displayed on a signal viewer such as a television monitor for inspection by a person. A staging means can be used to support the objects for viewing through the window. Routing means can be used to direct inspected objects into appropriate exit passages for accepted or rejected objects. The inspected objects are advantageously fed in a singular manner to the staging means and routing means. The inspection system is advantageously used in an enclosure when toxic or hazardous materials are being inspected. 10 figs.

  16. Optical fiber inspection system

    DOEpatents

    Moore, Francis W.

    1987-01-01

    A remote optical inspection system including an inspection head. The inspection head has a passageway through which pellets or other objects are passed. A window is provided along the passageway through which light is beamed against the objects being inspected. A plurality of lens assemblies are arranged about the window so that reflected light can be gathered and transferred to a plurality of coherent optical fiber light guides. The light guides transfer the light images to a television or other image transducer which converts the optical images into a representative electronic signal. The electronic signal can then be displayed on a signal viewer such as a television monitor for inspection by a person. A staging means can be used to support the objects for viewing through the window. Routing means can be used to direct inspected objects into appropriate exit passages for accepted or rejected objects. The inspected objects are advantageously fed in a singular manner to the staging means and routing means. The inspection system is advantageously used in an enclosure when toxic or hazardous materials are being inspected.

  17. Something going on in Milan: a review of the 4th International PhD Student Cancer Conference.

    PubMed

    Segré, C

    2010-01-01

    The 4th International PhD Student Cancer Conference was held at the IFOM-IEO-Campus in Milan from 19-21 May 2010 http://www.semm.it/events_researchPast.phpThe Conference covered many topics related to cancer, from basic biology to clinical aspects of the disease. All attendees presented their research, by either giving a talk or presenting a poster. This conference is an opportunity to introduce PhD students to top cancer research institutes across Europe.THE CORE PARTICIPANTING INSTITUTES INCLUDED: European School of Molecular Medicine (SEMM)-IFOM-IEO Campus, MilanBeatson Institute for Cancer Research (BICR), GlasgowCambridge Research Institute (CRI), Cambridge, UKMRC Gray Institute of Radiation Biology (GIROB), OxfordLondon Research Institute (LRI), LondonPaterson Institute for Cancer Research (PICR), ManchesterThe Netherlands Cancer Institute (NKI), Amsterdam'You organizers have crushed all my prejudices towards Italians. Congratulations, I enjoyed the conference immensely!' Even if it might have sounded like rudeness for sure this was supposed to be a genuine compliment (at least, that's how we took it), also considering that it was told by a guy who himself was the fusion of two usually antithetical concepts: fashion style and English nationality.The year 2010 has marked an important event for Italian research in the international scientific panorama: the European School of Molecular Medicine (SEMM) had the honour to host the 4th International PhD Student Cancer Conference, which was held from 19-21 May 2010 at the IFOM-IEO-Campus (http://www.semm.it/events_researchPast.php) in Milan.The conference was attended by more than one hundred students, coming from a selection of cutting edge European institutes devoted to cancer research. The rationale behind it is the promotion of cooperation among young scientists across Europe to debate about science and to exchange ideas and experiences. But that is not all, it is also designed for PhD students to get in touch

  18. Fire Prevention Inspection Procedures.

    ERIC Educational Resources Information Center

    Pribyl, Paul F.

    Lesson plans are provided for a fire prevention inspection course of the Wisconsin Fire Service Training program. Objectives for the course are to enable students to describe and conduct fire prevention inspections, to identify and correct hazards common to most occupancies, to understand the types of building construction and occupancy, and to…

  19. Changing Classrooms through Inspection.

    ERIC Educational Resources Information Center

    Chapman, Christopher

    2001-01-01

    Reports findings from a preliminary study evaluating effects of the UK's Office for Standards in Education inspections on classroom change, based on teachers' perceptions, responses, and intentions to change practice (resulting from the inspection process) at five comprehensive secondary schools. School context and culture figure prominently.…

  20. Comparison of rhodomine-WT and sodium chloride tracer transport in a 4th order arctic river

    NASA Astrophysics Data System (ADS)

    Smull, E. M.; Wlostowski, A. N.; Gooseff, M. N.; Bowden, W. B.; Wollheim, W. M.

    2012-12-01

    Conservative tracers are useful for tracking a parcel of water through a river reach and understanding tracer transport phenomena (i.e. advection, dispersion, and transient storage). Rhodomine- WT (RWT) and sodium chloride (NaCl) are two popular stream tracers. NaCl is considered to be conservative and relatively inexpensive, yet it cannot be detected at very low concentrations. On the other hand, RWT can be detected at very low concentrations (<0.1 ppb), but it is known to photo-degrade and sorb to organic materials. Previous work has compared these tracers with small-scale laboratory analyses and field experiments on small headwater streams. The limitations and advantages to each of these tracers, as applied to large river slug injections, are not clearly understood. This work seeks to answer the following questions: 1) Does RWT improve the tracer window of detection (time of tracer arrival to time of tracer non-detection), compared to NaCl? 2) Are there differences in the late-time tailing behavior of each tracer? More specifically, can we compare RWT and NaCl breakthrough curve tail shapes to understand processes contributing to late time solute transport (transient storage or sorption-desorption)? During the summer of 2012, combined slug additions of RWT and NaCl were injected into a 1.5-kilometer reach on the Kuparuk River, a 4th order tundra river underlain by continuous permafrost located on Alaska's North Slope. Fluorescence and electrical conductivity were continuously logged at the upstream and downstream ends of the reach. Preliminary results show that the window of detection is expanded when using RWT under both high and low flow conditions by 0.2 times the advective transport timescale. Tail shapes are more similar under higher discharge conditions and dissimilar under lower discharge conditions. For example, using an exponential regression model (c(t) = eat) to quantify tail shapes, at Q = 500 l/s the exponential coefficient ratio, aRWT:aNaCl, is 0

  1. Syntheses and single-crystal structures of CsTh(MoO 4) 2Cl and Na 4Th(WO 4) 4

    NASA Astrophysics Data System (ADS)

    Bang Jin, Geng; Soderholm, L.

    2011-02-01

    Colorless crystals of CsTh(MoO 4) 2Cl and Na 4Th(WO 4) 4 have been synthesized at 993 K by the solid-state reactions of ThO 2, MoO 3, CsCl, and ThCl 4 with Na 2WO 4. Both compounds have been characterized by the single-crystal X-ray diffraction. The structure of CsTh(MoO 4) 2Cl is orthorhombic, consisting of two adjacent [Th(MoO 4) 2] layers separated by an ionic CsCl sublattice. It can be considered as an insertion compound of Th(MoO 4) 2 and reformulated as Th(MoO 4) 2·CsCl. The Th atom coordinates to seven monodentate MoO 4 tetrahedra and one Cl atom in a highly distorted square antiprism. Na 4Th(WO 4) 4 adopts a scheelite superlattice structure. The three-dimensional framework of Na 4Th(WO 4) 4 is constructed from corner-sharing ThO 8 square antiprisms and WO 4 tetrahedra. The space within the channels is filled by six-coordinate Na ions. Crystal data: CsTh(MoO 4) 2Cl, monoclinic, P2 1/ c, Z=4, a=10.170(1) Å, b=10.030(1) Å, c=9.649(1) Å, β=95.671(2)°, V=979.5(2) Å 3, R( F)=2.65% for I>2 σ( I); Na 4Th(WO 4) 4, tetragonal, I4 1/ a, Z=4, a=11.437(1) Å, c=11.833(2) Å, V=1547.7(4) Å 3, R( F)=3.02% for I>2 σ( I).

  2. Automatic method for inspecting plywood shear samples

    NASA Astrophysics Data System (ADS)

    Avent, R. R., III; Conners, Richard W.

    1991-03-01

    A plywood panel is composed of several layers of wood bonded together by glue. The adhesive integrity of the glue formulation employed must surpass the structural integrity of wood used to make the panel. The American Plywood Association (APA) regularly tests plywood from manufacturing plants to ensure that this performance requirement is met. One of the procedures used is to saw a panel into a number of 1 X 3- 1/4 inch blocks called samples. These samples are then subjected to a number of treatments to simulate natural aging. The treated samples are then sheared into two halves. A 1 X 1 inch area on each of the two halves is then visually inspected to determine the percent wood failure that occurred during the shear. Roughly speaking a region of solid wood or a region of wood fibers embedded in glue is considered to be a region of wood failure while a region of glue is considered to be a region of glue failure. If the percent wood failure of sample from a significant number or panels from a plant is too low, the right to use the APA trademarks is withdrawn. The number of samples inspected annually by the APA is in the millions. The human inspectors are well trained, typically having years of experience, and are regularly tested. As in any human endeavor, the inspectors are subject to fatigue, boredom, etc. For these and other reasons an automatic inspection system could aid the APA in better performing its regulatory role.

  3. NONCONVEX REGULARIZATION FOR SHAPE PRESERVATION

    SciTech Connect

    CHARTRAND, RICK

    2007-01-16

    The authors show that using a nonconvex penalty term to regularize image reconstruction can substantially improve the preservation of object shapes. The commonly-used total-variation regularization, {integral}|{del}u|, penalizes the length of the object edges. They show that {integral}|{del}u|{sup p}, 0 < p < 1, only penalizes edges of dimension at least 2-p, and thus finite-length edges not at all. We give numerical examples showing the resulting improvement in shape preservation.

  4. 2.5 Gbps clock data recovery using 1/4th-rate quadricorrelator frequency detector and skew-calibrated multi-phase clock generator

    NASA Astrophysics Data System (ADS)

    Tontisirin, S.; Tielert, R.

    2006-09-01

    A Gb/s clock and data recovery (CDR) circuit using 1/4th-rate digital quadricorrelator frequency detector and skew-calibrated multi-phase voltage-controlled oscillator is presented. With 1/4th-rate clock architecture, the coil-free oscillator can have lower operation frequency providing sufficient low-jitter operation. Moreover, it is an inherent 1-to-4 DEMUX. The skew calibration scheme is applied to reduce phase offset in multi-phase clock generator. The CDR with frequency detector can have small loop bandwidth, wide pull-in range and can operate without the need for a local reference clock. This 1/4th-rate CDR is implemented in standard 0.18 μm CMOS technology. It has an active area of 0.7 mm2 and consumes 100 mW at 1.8 V supply. The CDR has low jitter operation in a wide frequency range from 1-2.25 Gb/s. Measurement of Bit-Error Rate is less than 10-12 for 2.25 Gb/s incoming data 27-1 PRBS, jitter peak-to-peak of 0.7 unit interval (UI) modulation at 10 MHz.

  5. Geometric continuum regularization of quantum field theory

    SciTech Connect

    Halpern, M.B. . Dept. of Physics)

    1989-11-08

    An overview of the continuum regularization program is given. The program is traced from its roots in stochastic quantization, with emphasis on the examples of regularized gauge theory, the regularized general nonlinear sigma model and regularized quantum gravity. In its coordinate-invariant form, the regularization is seen as entirely geometric: only the supermetric on field deformations is regularized, and the prescription provides universal nonperturbative invariant continuum regularization across all quantum field theory. 54 refs.

  6. Regular patterns stabilize auditory streams.

    PubMed

    Bendixen, Alexandra; Denham, Susan L; Gyimesi, Kinga; Winkler, István

    2010-12-01

    The auditory system continuously parses the acoustic environment into auditory objects, usually representing separate sound sources. Sound sources typically show characteristic emission patterns. These regular temporal sound patterns are possible cues for distinguishing sound sources. The present study was designed to test whether regular patterns are used as cues for source distinction and to specify the role that detecting these regularities may play in the process of auditory stream segregation. Participants were presented with tone sequences, and they were asked to continuously indicate whether they perceived the tones in terms of a single coherent sequence of sounds (integrated) or as two concurrent sound streams (segregated). Unknown to the participant, in some stimulus conditions, regular patterns were present in one or both putative streams. In all stimulus conditions, participants' perception switched back and forth between the two sound organizations. Importantly, regular patterns occurring in either one or both streams prolonged the mean duration of two-stream percepts, whereas the duration of one-stream percepts was unaffected. These results suggest that temporal regularities are utilized in auditory scene analysis. It appears that the role of this cue lies in stabilizing streams once they have been formed on the basis of simpler acoustic cues. PMID:21218898

  7. Extended Locus of Regular Nuclei

    SciTech Connect

    Amon, L.; Casten, R. F.

    2007-04-23

    A new family of IBM Hamiltonians, characterized by certain parameter values, was found about 15 years ago by Alhassid and Whelan to display almost regular dynamics, and yet these solutions to the IBM do not belong to any of the known dynamical symmetry limits (vibrational, rotational and {gamma} - unstable). Rather, they comprise an 'Arc of Regularity' cutting through the interior of the symmetry triangle from U(5) to SU(3) where suddenly there is a decrease in chaoticity and a significant increase in regularity. A few years ago, the first set of nuclei lying along this arc was discovered. The purpose of the present work is to search more broadly in the nuclear chart at all nuclei from Z = 40 - 100 for other examples of such 'regular' nuclei. Using a unique signature for such nuclei involving energy differences of certain excited states, we have identified an additional set of 12 nuclei lying near or along the arc. Some of these nuclei are known to have low-lying intruder states and therefore care must be taken, however, in judging their structure. The regularity exhibited by nuclei near the arc presumably reflects the validity or partial validity of some new, as yet unknown, quantum number describing these systems and giving the regularity found for them.

  8. 46 CFR 164.009-23 - Factory inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Factory inspection. 164.009-23 Section 164.009-23...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-23 Factory... regular schedule. However, the Commander of the Coast Guard District in which a factory is located...

  9. 46 CFR 164.009-23 - Factory inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Factory inspection. 164.009-23 Section 164.009-23...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-23 Factory... regular schedule. However, the Commander of the Coast Guard District in which a factory is located...

  10. 46 CFR 164.009-23 - Factory inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Factory inspection. 164.009-23 Section 164.009-23...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-23 Factory... regular schedule. However, the Commander of the Coast Guard District in which a factory is located...

  11. 46 CFR 164.009-23 - Factory inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Factory inspection. 164.009-23 Section 164.009-23...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-23 Factory... regular schedule. However, the Commander of the Coast Guard District in which a factory is located...

  12. 46 CFR 164.009-23 - Factory inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Factory inspection. 164.009-23 Section 164.009-23...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-23 Factory... regular schedule. However, the Commander of the Coast Guard District in which a factory is located...

  13. 49 CFR 1248.6 - Public inspection-railroad reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... STATISTICS § 1248.6 Public inspection—railroad reports. The individual commodity statistics reports of class... public inspection, and such required commodity statistics reports, to be filed for the years beginning..., may be excluded from a railroad's regular freight commodity statistics report and filed in...

  14. Guest Editor's introduction: Selected papers from the 4th USENIX Conference on Object-Oriented Technologies and Systems

    NASA Astrophysics Data System (ADS)

    Sventek, Joe

    1998-12-01

    Hewlett-Packard Laboratories, 1501 Page Mill Road, Palo Alto, CA 94304, USA Introduction The USENIX Conference on Object-Oriented Technologies and Systems (COOTS) is held annually in the late spring. The conference evolved from a set of C++ workshops that were held under the auspices of USENIX, the first of which met in 1989. Given the growing diverse interest in object-oriented technologies, the C++ focus of the workshop eventually became too narrow, with the result that the scope was widened in 1995 to include object-oriented technologies and systems. COOTS is intended to showcase advanced R&D efforts in object-oriented technologies and software systems. The conference emphasizes experimental research and experience gained by using object-oriented techniques and languages to build complex software systems that meet real-world needs. COOTS solicits papers in the following general areas: application of, and experiences with, object-oriented technologies in particular domains (e.g. financial, medical, telecommunication); the architecture and implementation of distributed object systems (e.g. CORBA, DCOM, RMI); object-oriented programming and specification languages; object-oriented design and analysis. The 4th meeting of COOTS was held 27 - 30 April 1998 at the El Dorado Hotel, Santa Fe, New Mexico, USA. Several tutorials were given. The technical program proper consisted of a single track of six sessions, with three paper presentations per session. A keynote address and a provocative panel session rounded out the technical program. The program committee reviewed 56 papers, selecting the best 18 for presentation in the technical sessions. While we solicit papers across the spectrum of applications of object-oriented technologies, this year there was a predominance of distributed, object-oriented papers. The accepted papers reflected this asymmetry, with 15 papers on distributed objects and 3 papers on object-oriented languages. The papers in this special issue are

  15. Apparatus for inspecting piping

    DOEpatents

    Zollingger, W.T.; Appel, D.K.; Park, L.R.

    1995-03-21

    An inspection rabbit is described for inspecting piping systems having severe bends therein. The rabbit consists of a flexible, modular body containing a miniaturized eddy current inspection probe, a self-contained power supply for proper operation of the rabbit, an outer surface that allows ease of movement through piping systems and means for transmitting data generated by the inspection device. The body is preferably made of flexible polyvinyl chloride (PVC) tubing or, alternatively, silicone rubber with a shrink wrapping of polytetrafluoroethylene (TEFLON{trademark}). The body is formed to contain the power supply, preferably a plurality of batteries, and a spool of communication wire that connects to a data processing computer external to the piping system. 6 figures.

  16. Apparatus for inspecting piping

    DOEpatents

    Zollingger, W. Thor; Appel, D. Keith; Park, Larry R.

    1995-01-01

    An inspection rabbit for inspecting piping systems having severe bends therein. The rabbit consists of a flexible, modular body containing a miniaturized eddy current inspection probe, a self-contained power supply for proper operation of the rabbit, an outer surface that allows ease of movement through piping systems and means for transmitting data generated by the inspection device. The body is preferably made of flexible polyvinyl chloride (PVC) tubing or, alternatively, silicone rubber with a shrink wrapping of polytetrafluoroethylene (TEFLON.RTM.). The body is formed to contain the power supply, preferably a plurality of batteries, and a spool of communication wire that connects to a data processing computer external to the piping system.

  17. Guidelines for software inspections

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Quality control inspections are software problem finding procedures which provide defect removal as well as improvements in software functionality, maintenance, quality, and development and testing methodology is discussed. The many side benefits include education, documentation, training, and scheduling.

  18. Nuclear Plant Inspection

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Engineers from the Power Authority of the State of New York use a Crack Growth Analysis Program supplied by COSMIC (Computer Software Management and Information Center) in one stage of nuclear plant inspection. Welds of the nuclear steam supply system are checked for cracks; radiographs, dye penetration and visual inspections are performed to locate cracks in the metal structure and welds. The software package includes three separate crack growth analysis models and enables necessary repairs to be planned before serious problems develop.

  19. Wedges for ultrasonic inspection

    DOEpatents

    Gavin, Donald A.

    1982-01-01

    An ultrasonic transducer device is provided which is used in ultrasonic inspection of the material surrounding a threaded hole and which comprises a wedge of plastic or the like including a curved threaded surface adapted to be screwed into the threaded hole and a generally planar surface on which a conventional ultrasonic transducer is mounted. The plastic wedge can be rotated within the threaded hole to inspect for flaws in the material surrounding the threaded hole.

  20. Source Inspection Scheduling Calendar

    NASA Technical Reports Server (NTRS)

    Hollis, Brayden

    2011-01-01

    Quality is an essential component for creating flight hardware travelling through space since the hardware is extremely expensive and cannot be reworked or repaired once launched. An important step in this process is ensuring the quality of hardware procured from Jet Propulsion Laboratory's (JPL) suppliers. An important element of determining supplier quality is source inspection. Source inspections are performed at suppliers' facilities by JPL employeesto ensure that hardware characteristics are acceptable before being covered up and/or delivered to JPL.

  1. Regularization Analysis of SAR Superresolution

    SciTech Connect

    DELAURENTIS,JOHN M.; DICKEY,FRED M.

    2002-04-01

    Superresolution concepts offer the potential of resolution beyond the classical limit. This great promise has not generally been realized. In this study we investigate the potential application of superresolution concepts to synthetic aperture radar. The analytical basis for superresolution theory is discussed. In a previous report the application of the concept to synthetic aperture radar was investigated as an operator inversion problem. Generally, the operator inversion problem is ill posed. This work treats the problem from the standpoint of regularization. Both the operator inversion approach and the regularization approach show that the ability to superresolve SAR imagery is severely limited by system noise.

  2. Dimensional regularization in configuration space

    SciTech Connect

    Bollini, C.G. |; Giambiagi, J.J.

    1996-05-01

    Dimensional regularization is introduced in configuration space by Fourier transforming in {nu} dimensions the perturbative momentum space Green functions. For this transformation, the Bochner theorem is used; no extra parameters, such as those of Feynman or Bogoliubov and Shirkov, are needed for convolutions. The regularized causal functions in {ital x} space have {nu}-dependent moderated singularities at the origin. They can be multiplied together and Fourier transformed (Bochner) without divergence problems. The usual ultraviolet divergences appear as poles of the resultant analytic functions of {nu}. Several examples are discussed. {copyright} {ital 1996 The American Physical Society.}

  3. Identifying Cognitive States Using Regularity Partitions

    PubMed Central

    2015-01-01

    Functional Magnetic Resonance (fMRI) data can be used to depict functional connectivity of the brain. Standard techniques have been developed to construct brain networks from this data; typically nodes are considered as voxels or sets of voxels with weighted edges between them representing measures of correlation. Identifying cognitive states based on fMRI data is connected with recording voxel activity over a certain time interval. Using this information, network and machine learning techniques can be applied to discriminate the cognitive states of the subjects by exploring different features of data. In this work we wish to describe and understand the organization of brain connectivity networks under cognitive tasks. In particular, we use a regularity partitioning algorithm that finds clusters of vertices such that they all behave with each other almost like random bipartite graphs. Based on the random approximation of the graph, we calculate a lower bound on the number of triangles as well as the expectation of the distribution of the edges in each subject and state. We investigate the results by comparing them to the state of the art algorithms for exploring connectivity and we argue that during epochs that the subject is exposed to stimulus, the inspected part of the brain is organized in an efficient way that enables enhanced functionality. PMID:26317983

  4. 46 CFR 176.818 - Sanitary inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Sanitary inspection. 176.818 Section 176.818 Shipping...) INSPECTION AND CERTIFICATION Material Inspections § 176.818 Sanitary inspection. At each inspection for... sanitary condition....

  5. 46 CFR 176.818 - Sanitary inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Sanitary inspection. 176.818 Section 176.818 Shipping...) INSPECTION AND CERTIFICATION Material Inspections § 176.818 Sanitary inspection. At each inspection for... sanitary condition....

  6. Rotations of the Regular Polyhedra

    ERIC Educational Resources Information Center

    Jones, MaryClara; Soto-Johnson, Hortensia

    2006-01-01

    The study of the rotational symmetries of the regular polyhedra is important in the classroom for many reasons. Besides giving the students an opportunity to visualize in three dimensions, it is also an opportunity to relate two-dimensional and three-dimensional concepts. For example, rotations in R[superscript 2] require a point and an angle of…

  7. Regularized Generalized Structured Component Analysis

    ERIC Educational Resources Information Center

    Hwang, Heungsun

    2009-01-01

    Generalized structured component analysis (GSCA) has been proposed as a component-based approach to structural equation modeling. In practice, GSCA may suffer from multi-collinearity, i.e., high correlations among exogenous variables. GSCA has yet no remedy for this problem. Thus, a regularized extension of GSCA is proposed that integrates a ridge…

  8. Academic Improvement through Regular Assessment

    ERIC Educational Resources Information Center

    Wolf, Patrick J.

    2007-01-01

    Media reports are rife with claims that students in the United States are overtested and that they and their education are suffering as result. Here I argue the opposite--that students would benefit in numerous ways from more frequent assessment, especially of diagnostic testing. The regular assessment of students serves critical educational and…

  9. The 4th Bi-annual international African-Caribbean Cancer Consortium conference: building capacity to address cancer health disparities in populations of African descent.

    PubMed

    Blackman, Elizabeth; Campbell, Jasmine; Bowen, Carlene; Delmoor, Ernestine; Jean-Louis, Gilda; Noumbissi, Raphiatou; O'Garro, Yvonne; Richards-Waritay, Oni; Straughter, Stanley; Tolbert, Vera; Wilson, Barbara; Ragin, Camille

    2014-01-01

    This is a brief summary of the 4(th) International Meeting of the African-Caribbean Cancer Consortium (AC3), organized and sponsored by Fox Chase Cancer Center (FCCC), and held on July 21-22, 2012 at the Lincoln University Graduate Center, Lincoln Plaza, Philadelphia, Pennsylvania. AC3 investigators gathered in Philadelphia, PA to present the results of our ongoing collaborative research efforts throughout the African Diaspora. The general theme addressed cancer health disparities and presentations represented all cancer types. However, there was particular emphasis on women's cancers, related to human papillomavirus (HPV) and human immunodeficiency virus (HIV) infections. PMID:26422007

  10. 4H-Chromene-based anticancer agents towards multi-drug resistant HL60/MX2 human leukemia: SAR at the 4th and 6th positions.

    PubMed

    Puppala, Manohar; Zhao, Xinghua; Casemore, Denise; Zhou, Bo; Aridoss, Gopalakrishnan; Narayanapillai, Sreekanth; Xing, Chengguo

    2016-03-15

    4H-Chromene-based compounds, for example, CXL017, CXL035, and CXL055, have a unique anticancer potential that they selectively kill multi-drug resistant cancer cells. Reported herein is the extended structure-activity relationship (SAR) study, focusing on the ester functional group at the 4th position and the conformation at the 6th position. Sharp SARs were observed at both positions with respect to cellular cytotoxic potency and selectivity between the parental HL60 and the multi-drug resistant HL60/MX2 cells. These results provide critical guidance for future medicinal optimization. PMID:26867486

  11. Operator regularization and quantum gravity

    NASA Astrophysics Data System (ADS)

    Mann, R. B.; Tarasov, L.; Mckeon, D. G. C.; Steele, T.

    1989-01-01

    Operator regularization has been shown to be a symmetry preserving means of computing Green functions in gauge symmetric and supersymmetric theories which avoids the explicit occurrence of divergences. In this paper we examine how this technique can be applied to computing quantities in non-renormalizable theories in general and quantum gravity in particular. Specifically, we consider various processes to one- and two-loop order in φ4N theory for N > 4 for which the theory is non-renormalizable. We then apply operator regularization to determine the one-loop graviton correction to the spinor propagator. The effective action for quantum scalars in a background gravitational field is evaluated in operator regularization using both the weak-field method and the normal coordinate expansion. This latter case yields a new derivation of the Schwinger-de Witt expansion which avoids the use of recursion relations. Finally we consider quantum gravity coupled to scalar fields in n dimensions, evaluating those parts of the effective action that (in other methods) diverge as n → 4. We recover the same divergence structure as is found using dimensional regularization if n ≠ 4, but if n = 4 at the outset no divergence arises at any stage of the calculation. The non-renormalizability of such theories manifests itself in the scale-dependence at one-loop order of terms that do not appear in the original lagrangian. In all cases our regularization procedure does not break any invariances present in the theory and avoids the occurence of explicit divergences.

  12. Temporal regularity in speech perception: Is regularity beneficial or deleterious?

    PubMed Central

    Geiser, Eveline; Shattuck-Hufnagel, Stefanie

    2012-01-01

    Speech rhythm has been proposed to be of crucial importance for correct speech perception and language learning. This study investigated the influence of speech rhythm in second language processing. German pseudo-sentences were presented to participants in two conditions: ‘naturally regular speech rhythm’ and an ‘emphasized regular rhythm'. Nine expert English speakers with 3.5±1.6 years of German training repeated each sentence after hearing it once over headphones. Responses were transcribed using the International Phonetic Alphabet and analyzed for the number of correct, false and missing consonants as well as for consonant additions. The over-all number of correct reproductions of consonants did not differ between the two experimental conditions. However, speech rhythmicization significantly affected the serial position curve of correctly reproduced syllables. The results of this pilot study are consistent with the view that speech rhythm is important for speech perception. PMID:22701753

  13. Piping inspection round robin

    SciTech Connect

    Heasler, P.G.; Doctor, S.R.

    1996-04-01

    The piping inspection round robin was conducted in 1981 at the Pacific Northwest National Laboratory (PNNL) to quantify the capability of ultrasonics for inservice inspection and to address some aspects of reliability for this type of nondestructive evaluation (NDE). The round robin measured the crack detection capabilities of seven field inspection teams who employed procedures that met or exceeded the 1977 edition through the 1978 addenda of the American Society of Mechanical Engineers (ASME) Section 11 Code requirements. Three different types of materials were employed in the study (cast stainless steel, clad ferritic, and wrought stainless steel), and two different types of flaws were implanted into the specimens (intergranular stress corrosion cracks (IGSCCs) and thermal fatigue cracks (TFCs)). When considering near-side inspection, far-side inspection, and false call rate, the overall performance was found to be best in clad ferritic, less effective in wrought stainless steel and the worst in cast stainless steel. Depth sizing performance showed little correlation with the true crack depths.

  14. Distributional Stress Regularity: A Corpus Study

    ERIC Educational Resources Information Center

    Temperley, David

    2009-01-01

    The regularity of stress patterns in a language depends on "distributional stress regularity", which arises from the pattern of stressed and unstressed syllables, and "durational stress regularity", which arises from the timing of syllables. Here we focus on distributional regularity, which depends on three factors. "Lexical stress patterning"…

  15. Advances in inspection automation

    NASA Astrophysics Data System (ADS)

    Weber, Walter H.; Mair, H. Douglas; Jansen, Dion; Lombardi, Luciano

    2013-01-01

    This new session at QNDE reflects the growing interest in inspection automation. Our paper describes a newly developed platform that makes the complex NDE automation possible without the need for software programmers. Inspection tasks that are tedious, error-prone or impossible for humans to perform can now be automated using a form of drag and drop visual scripting. Our work attempts to rectify the problem that NDE is not keeping pace with the rest of factory automation. Outside of NDE, robots routinely and autonomously machine parts, assemble components, weld structures and report progress to corporate databases. By contrast, components arriving in the NDT department typically require manual part handling, calibrations and analysis. The automation examples in this paper cover the development of robotic thickness gauging and the use of adaptive contour following on the NRU reactor inspection at Chalk River.

  16. Humoral immunity and CD4+ Th1 cells are both necessary for a fully protective immune response upon secondary infection with Brucella melitensis.

    PubMed

    Vitry, Marie-Alice; Hanot Mambres, Delphine; De Trez, Carl; Akira, Shizuo; Ryffel, Bernhard; Letesson, Jean-Jacques; Muraille, Eric

    2014-04-15

    Brucella spp are intracellular bacteria that cause brucellosis, one of the most common zoonoses in the world. Given the serious medical consequences of this disease, a safe and effective human vaccine is urgently needed. Efforts to develop this vaccine have been hampered by our lack of understanding of what constitutes a protective memory response against Brucella. In this study, we characterize the cells and signaling pathways implicated in the generation of a protective immune memory response following priming by the injection of heat-killed or live Brucella melitensis 16M. Using a panel of gene-deficient mice, we demonstrated that during a secondary recall response, both the Brucella-specific humoral response and CD4+ Th1 cells must act together to confer protective immunity in the spleen to B. melitensis infection. Humoral protective immunity is induced by the inoculation of both heat-killed and live bacteria, and its development does not require T cells, MyD88/IL-12p35 signaling pathways, or an activation-induced deaminase-mediated isotype switch. In striking contrast, the presence of memory IFN-γ-producing CD4+ Th1 cells requires the administration of live bacteria and functional MyD88/IL-12p35 pathways. In summary, our work identifies several immune markers closely associated with protective immune memory and could help to define a rational strategy to obtain an effective human vaccine against brucellosis. PMID:24646742

  17. The Neumann system for the 4th-order eigenvalue problem and constraint flows of the coupled KdV-type equations

    NASA Astrophysics Data System (ADS)

    Zhao, Ye; Gu, Zhuquan; Liu, Yafeng

    2012-07-01

    In this paper, the Neumann system for the 4th-order eigenvalue problem Ly = (∂4+ q∂2+∂2 q+ ip∂+ i∂ p+ y = Λy) has been given. By means of the Neumann constraint condition, the perfect constraint set Γ and the relations between the potentials { q, p, r} and the eigenvector y are obtained. Then, based on the Euler-Lagrange function and Legendre transformations, a reasonable Jacobi-Ostrogradsky coordinate system has been found, which can be equal to the real Hamiltonian canonical coordinate system in R 8 N . Using Cao's method and Moser's constraint manifold, the Lax pairs of the evolution equation hierarchy with the 4th-order eigenvalue problems are nonlinearized. So a new finite-dimensional integrable Hamilton system on the constraint submanifold R 8 N-4 is generated. Moreover, the solutions of the evolution equations for the infinite-dimensional soliton systems are obtained by the involutive flow of the finite-dimensional completely integrable systems.

  18. IR Spot Weld Inspect

    SciTech Connect

    Chen, Jian; Feng, Zhili

    2014-01-01

    In automotive industry, destructive inspection of spot welds is still the mandatory quality assurance method due to the lack of efficient non-destructive evaluation (NDE) tools. However, it is costly and time-consuming. Recently at ORNL, a new NDE prototype system for spot weld inspection using infrared (IR) thermography has been developed to address this problem. This software contains all the key functions that ensure the NDE system to work properly: system input/output control, image acquisition, data analysis, weld quality database generation and weld quality prediction, etc.

  19. IR Spot Weld Inspect

    Energy Science and Technology Software Center (ESTSC)

    2014-01-01

    In automotive industry, destructive inspection of spot welds is still the mandatory quality assurance method due to the lack of efficient non-destructive evaluation (NDE) tools. However, it is costly and time-consuming. Recently at ORNL, a new NDE prototype system for spot weld inspection using infrared (IR) thermography has been developed to address this problem. This software contains all the key functions that ensure the NDE system to work properly: system input/output control, image acquisition, datamore » analysis, weld quality database generation and weld quality prediction, etc.« less

  20. Adaptive regularization of earthquake slip distribution inversion

    NASA Astrophysics Data System (ADS)

    Wang, Chisheng; Ding, Xiaoli; Li, Qingquan; Shan, Xinjian; Zhu, Jiasong; Guo, Bo; Liu, Peng

    2016-04-01

    Regularization is a routine approach used in earthquake slip distribution inversion to avoid numerically abnormal solutions. To date, most slip inversion studies have imposed uniform regularization on all the fault patches. However, adaptive regularization, where each retrieved parameter is regularized differently, has exhibited better performances in other research fields such as image restoration. In this paper, we implement an investigation into adaptive regularization for earthquake slip distribution inversion. It is found that adaptive regularization can achieve a significantly smaller mean square error (MSE) than uniform regularization, if it is set properly. We propose an adaptive regularization method based on weighted total least squares (WTLS). This approach assumes that errors exist in both the regularization matrix and observation, and an iterative algorithm is used to solve the solution. A weight coefficient is used to balance the regularization matrix residual and the observation residual. An experiment using four slip patterns was carried out to validate the proposed method. The results show that the proposed regularization method can derive a smaller MSE than uniform regularization and resolution-based adaptive regularization, and the improvement in MSE is more significant for slip patterns with low-resolution slip patches. In this paper, we apply the proposed regularization method to study the slip distribution of the 2011 Mw 9.0 Tohoku earthquake. The retrieved slip distribution is less smooth and more detailed than the one retrieved with the uniform regularization method, and is closer to the existing slip model from joint inversion of the geodetic and seismic data.

  1. Remote Inspection Challenge

    ERIC Educational Resources Information Center

    Roman, Harry T.

    2013-01-01

    The ability to remotely inspect equipment of an aging infrastructure is becoming of major interest to many industries. Often the ability to just get a look at a piece of critical equipment can yield very important information. With millions of miles of piping installed throughout the United States, this vast network is critical to oil, natural…

  2. Intelligent inspection system

    NASA Astrophysics Data System (ADS)

    May, Jeniece; Dale, Ken; Holloway, Mike; Gaby, Willard

    1997-01-01

    The intelligent inspection system is an advanced controller and analysis system for dimensional measuring machines dedicated to measuring surface of revolution mechanical parts. IIS was developed by the Lockheed Martin Energy Systems, Inc. Oak Ridge Y-12 plant because no commercial product was available to replace the obsolete computing systems on these important machines.

  3. Automatic Inspection During Machining

    NASA Technical Reports Server (NTRS)

    Ransom, Clyde L.

    1988-01-01

    In experimental manufacturing process, numerically-controlled machine tool temporarily converts into inspection machine by installing electronic touch probes and specially-developed numerical-control software. Software drives probes in paths to and on newly machined parts and collects data on dimensions of parts.

  4. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  5. 14 CFR 91.409 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... detail— (i) An explanation of the progressive inspection, including the continuity of inspection... the name and address of the person responsible for scheduling the inspections required by the...

  6. 14 CFR 91.409 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... detail— (i) An explanation of the progressive inspection, including the continuity of inspection... the name and address of the person responsible for scheduling the inspections required by the...

  7. 29 CFR 3.4 - Submission of weekly statements and the preservation and inspection of weekly payroll records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... inspection of weekly payroll records. 3.4 Section 3.4 Labor Office of the Secretary of Labor CONTRACTORS AND... STATES § 3.4 Submission of weekly statements and the preservation and inspection of weekly payroll... subcontractor, within seven days after the regular payment date of the payroll period, to a representative of...

  8. Climatic changes and social transformations in the Near East and North Africa during the 'long' 4th millennium BC: A comparative study of environmental and archaeological evidence

    NASA Astrophysics Data System (ADS)

    Clarke, Joanne; Brooks, Nick; Banning, Edward B.; Bar-Matthews, Miryam; Campbell, Stuart; Clare, Lee; Cremaschi, Mauro; di Lernia, Savino; Drake, Nick; Gallinaro, Marina; Manning, Sturt; Nicoll, Kathleen; Philip, Graham; Rosen, Steve; Schoop, Ulf-Dietrich; Tafuri, Mary Anne; Weninger, Bernhard; Zerboni, Andrea

    2016-03-01

    This paper explores the possible links between rapid climate change (RCC) and social change in the Near East and surrounding regions (Anatolia, central Syria, southern Israel, Mesopotamia, Cyprus and eastern and central Sahara) during the 'long' 4th millennium (∼4500-3000) BC. Twenty terrestrial and 20 marine climate proxies are used to identify long-term trends in humidity involving transitions from humid to arid conditions and vice versa. The frequency distribution of episodes of relative aridity across these records is calculated for the period 6300-2000 BC, so that the results may be interpreted in the context of the established arid episodes associated with RCC around 6200 and 2200 BC (the 8.2 and 4.2 kyr events). We identify two distinct episodes of heightened aridity in the early-mid 4th, and late 4th millennium BC. These episodes cluster strongly at 3600-3700 and 3100-3300 BC. There is also evidence of localised aridity spikes in the 5th and 6th millennia BC. These results are used as context for the interpretation of regional and local archaeological records with a particular focus on case studies from western Syria, the middle Euphrates, southern Israel and Cyprus. Interpretation of the records involves the construction of plausible narratives of human-climate interaction informed by concepts of adaptation and resilience from the literature on contemporary (i.e. 21st century) climate change and adaptation. The results are presented alongside well-documented examples of climatically-influenced societal change in the central and eastern Sahara, where detailed geomorphological studies of ancient environments have been undertaken in tandem with archaeological research. While the narratives for the Near East and Eastern Mediterranean remain somewhat speculative, the use of resilience and adaptation frameworks allows for a more nuanced treatment of human-climate interactions and recognises the diversity and context-specificity of human responses to climatic

  9. Knowledge and regularity in planning

    NASA Technical Reports Server (NTRS)

    Allen, John A.; Langley, Pat; Matwin, Stan

    1992-01-01

    The field of planning has focused on several methods of using domain-specific knowledge. The three most common methods, use of search control, use of macro-operators, and analogy, are part of a continuum of techniques differing in the amount of reused plan information. This paper describes TALUS, a planner that exploits this continuum, and is used for comparing the relative utility of these methods. We present results showing how search control, macro-operators, and analogy are affected by domain regularity and the amount of stored knowledge.

  10. Computational modes and the Machenauer N.L.N.M.I. of the GLAS 4th order model. [NonLinear Normal Mode Initialization in numerical weather forecasting

    NASA Technical Reports Server (NTRS)

    Navon, I. M.; Bloom, S.; Takacs, L. L.

    1985-01-01

    An attempt was made to use the GLAS global 4th order shallow water equations to perform a Machenhauer nonlinear normal mode initialization (NLNMI) for the external vertical mode. A new algorithm was defined for identifying and filtering out computational modes which affect the convergence of the Machenhauer iterative procedure. The computational modes and zonal waves were linearly initialized and gravitational modes were nonlinearly initialized. The Machenhauer NLNMI was insensitive to the absence of high zonal wave numbers. The effects of the Machenhauer scheme were evaluated by performing 24 hr integrations with nondissipative and dissipative explicit time integration models. The NLNMI was found to be inferior to the Rasch (1984) pseudo-secant technique for obtaining convergence when the time scales of nonlinear forcing were much smaller than the time scales expected from the natural frequency of the mode.

  11. The 4th Schizophrenia International Research Society Conference, 5-9 April 2014, Florence, Italy: a summary of topics and trends.

    PubMed

    Abayomi, Olukayode; Amato, Davide; Bailey, Candace; Bitanihirwe, Byron; Bowen, Lynneice; Burshtein, Shimon; Cullen, Alexis; Fusté, Montserrat; Herrmann, Ana P; Khodaie, Babak; Kilian, Sanja; Lang, Qortni A; Manning, Elizabeth E; Massuda, Raffael; Nurjono, Milawaty; Sadiq, Sarosh; Sanchez-Gutierrez, Teresa; Sheinbaum, Tamara; Shivakumar, Venkataram; Simon, Nicholas; Spiteri-Staines, Anneliese; Sirijit, Suttajit; Toftdahl, Nanna Gilliam; Wadehra, Sunali; Wang, Yi; Wigton, Rebekah; Wright, Susan; Yagoda, Sergey; Zaytseva, Yuliya; O'Shea, Anne; DeLisi, Lynn E

    2014-11-01

    The 4th Schizophrenia International Research Society Conference was held in Florence, Italy, April 5-9, 2014 and this year had as its emphasis, "Fostering Collaboration in Schizophrenia Research". Student travel awardees served as rapporteurs for each oral session, summarized the important contributions of each session and then each report was integrated into a final summary of data discussed at the entire conference by topic. It is hoped that by combining data from different presentations, patterns of interest will emerge and thus lead to new progress for the future. In addition, the following report provides an overview of the conference for those who were present, but could not participate in all sessions, and those who did not have the opportunity to attend, but who would be interested in an update on current investigations ongoing in the field of schizophrenia research. PMID:25306204

  12. THE 4th SCHIZOPHRENIA INTERNATIONAL RESEARCH SOCIETY CONFERENCE, 5–9 APRIL 2014, FLORENCE, ITALY: A summary of topics and trends

    PubMed Central

    Abayomi, Olukayode; Amato, Davide; Bailey, Candace; Bitanihirwe, Byron; Bowen, Lynneice; Burshtein, Shimon; Cullen, Alexis; Fusté, Montserrat; Herrmann, Ana P; Khodaie, Babak; Kilian, Sanja; Lang, Qortni A; Manning, Elizabeth E; Massuda, Raffael; Nurjono, Milawaty; Sadiq, Sarosh; Sanchez-Gutierrez, Teresa; Sheinbaum, Tamara; Shivakumar, Venkataram; Simon, Nicholas; Spiteri-Staines, Anneliese; Sirijit, Suttajit; Toftdahl, Nanna Gilliam; Wadehra, Sunali; Wang, Yi; Wigton, Rebekah; Wright, Susan; Yagoda, Sergey; Zaytseva, Yuliya; O’Shea, Anne; DeLisi, Lynn E.

    2015-01-01

    The 4th Schizophrenia International Research Society Conference was held in Florence, Italy, April 5–9, 2014.and this year had as its emphasis, “Fostering Collaboration in Schizophrenia Research”. Student travel awardees served as rapporteurs for each oral session, summarized the important contributions of each session and then each report was integrated into a final summary of data discussed at the entire conference by topic. It is hoped that by combining data from different presentations, patterns of interest will emerge and thus lead to new progress for the future. In addition, the following report provides an overview of the conference for those who were present, but could not participate in all sessions, and those who did not have the opportunity to attend, but who would be interested in an update on current investigations ongoing in the field of schizophrenia research. PMID:25306204

  13. Safety Audit/Inspection Manual.

    ERIC Educational Resources Information Center

    American Chemical Society, Washington, DC.

    This guide provides guidelines and procedures for safety audits and inspections in work environments. Contents include: (1) Administrative Concepts, (2) Physical Concepts, (3) Protecting Your Audits, (4) Safety Inspections, and (5) Safety Inspection Checklist. The appendix features federal laws and regulations affecting laboratories. (YDS)

  14. Optical inspection of NGL masks

    NASA Astrophysics Data System (ADS)

    Pettibone, Donald W.; Stokowski, Stanley E.

    2004-12-01

    For the last five years KLA-Tencor and our joint venture partners have pursued a research program studying the ability of optical inspection tools to meet the inspection needs of possible NGL lithographies. The NGL technologies that we have studied include SCALPEL, PREVAIL, EUV lithography, and Step and Flash Imprint Lithography. We will discuss the sensitivity of the inspection tools and mask design factors that affect tool sensitivity. Most of the work has been directed towards EUV mask inspection and how to optimize the mask to facilitate inspection. Our partners have succeeded in making high contrast EUV masks ranging in contrast from 70% to 98%. Die to die and die to database inspection of EUV masks have been achieved with a sensitivity that is comparable to what can be achieved with conventional photomasks, approximately 80nm defect sensitivity. We have inspected SCALPEL masks successfully. We have found a limitation of optical inspection when applied to PREVAIL stencil masks. We have run inspections on SFIL masks in die to die, reflected light, in an effort to provide feedback to improve the masks. We have used a UV inspection system to inspect both unpatterned EUV substrates (no coatings) and blanks (with EUV multilayer coatings). These inspection results have proven useful in driving down the substrate and blank defect levels.

  15. Flexible ultrasonic pipe inspection apparatus

    DOEpatents

    Jenkins, C.F.; Howard, B.D.

    1994-01-01

    Pipe crawlers, pipe inspection {open_quotes}rabbits{close_quotes} and similar vehicles are widely used for inspecting the interior surfaces of piping systems, storage tanks and process vessels for damaged or flawed structural features. This paper describes the design of a flexible, modular ultrasonic pipe inspection apparatus.

  16. Limbic system development underlies the emergence of classical fear conditioning during the 3rd and 4th weeks of life in the rat

    PubMed Central

    Deal, Alex L.; Erickson, Kristen J.; Shiers, Stephanie I.; Burman, Michael A.

    2016-01-01

    Classical fear conditioning creates an association between an aversive stimulus and a neutral stimulus. Although the requisite neural circuitry is well understood in mature organisms, the development of these circuits is less well studied. The current experiments examine the ontogeny of fear conditioning and relate it to neuronal activation assessed through immediate early gene (IEG) expression in the amygdala, hippocampus, perirhinal cortex, and hypothalamus of periweanling rats. Rat pups were fear conditioned, or not, during the 3rd or 4th weeks of life. Neuronal activation was assessed by quantifying expression of FBJ osteosarcoma oncogene (FOS) using immunohistochemistry (IHC) in Experiment 1. Fos and early growth response gene-1 (EGR1) expression was assessed using qRT-PCR in Experiment 2. Behavioral data confirm that both auditory and contextual fear continue to emerge between PD 17 and 24. The IEG expression data are highly consistent with these behavioral results. IHC results demonstrate significantly more FOS protein expression in the basal amygdala of fear conditioned PD 23 subjects compared to control subjects, but no significant difference at PD 17. qRT-PCR results suggest specific activation of the amygdala only in older subjects during auditory fear expression. A similar effect of age and conditioning status was also observed in the perirhinal cortex during both contextual and auditory fear expression. Overall, the development of fear conditioning occurring between the 3rd and 4th weeks of life appears to be at least partly attributable to changes in activation of the amygdala and perirhinal cortex during fear conditioning or expression. PMID:26820587

  17. Phase 2 clinical trial of rapamycin-resistant donor CD4+ Th2/Th1 (T-Rapa) cells after low-intensity allogeneic hematopoietic cell transplantation

    PubMed Central

    Fowler, Daniel H.; Mossoba, Miriam E.; Steinberg, Seth M.; Halverson, David C.; Stroncek, David; Khuu, Hahn M.; Hakim, Frances T.; Castiello, Luciano; Sabatino, Marianna; Leitman, Susan F.; Mariotti, Jacopo; Gea-Banacloche, Juan C.; Sportes, Claude; Hardy, Nancy M.; Hickstein, Dennis D.; Pavletic, Steven Z.; Rowley, Scott; Goy, Andre; Donato, Michele; Korngold, Robert; Pecora, Andrew; Levine, Bruce L.; June, Carl H.; Gress, Ronald E.; Bishop, Michael R.

    2013-01-01

    In experimental models, ex vivo induced T-cell rapamycin resistance occurred independent of T helper 1 (Th1)/T helper 2 (Th2) differentiation and yielded allogeneic CD4+ T cells of increased in vivo efficacy that facilitated engraftment and permitted graft-versus-tumor effects while minimizing graft-versus-host disease (GVHD). To translate these findings, we performed a phase 2 multicenter clinical trial of rapamycin-resistant donor CD4+ Th2/Th1 (T-Rapa) cells after allogeneic-matched sibling donor hematopoietic cell transplantation (HCT) for therapy of refractory hematologic malignancy. T-Rapa cell products, which expressed a balanced Th2/Th1 phenotype, were administered as a preemptive donor lymphocyte infusion at day 14 post-HCT. After T-Rapa cell infusion, mixed donor/host chimerism rapidly converted, and there was preferential immune reconstitution with donor CD4+ Th2 and Th1 cells relative to regulatory T cells and CD8+ T cells. The cumulative incidence probability of acute GVHD was 20% and 40% at days 100 and 180 post-HCT, respectively. There was no transplant-related mortality. Eighteen of 40 patients (45%) remain in sustained complete remission (range of follow-up: 42-84 months). These results demonstrate the safety of this low-intensity transplant approach and the feasibility of subsequent randomized studies to compare T-Rapa cell-based therapy with standard transplantation regimens. This trial was registered at www.cancer.gov/clinicaltrials as #NCT 00077480. PMID:23426943

  18. RES: Regularized Stochastic BFGS Algorithm

    NASA Astrophysics Data System (ADS)

    Mokhtari, Aryan; Ribeiro, Alejandro

    2014-12-01

    RES, a regularized stochastic version of the Broyden-Fletcher-Goldfarb-Shanno (BFGS) quasi-Newton method is proposed to solve convex optimization problems with stochastic objectives. The use of stochastic gradient descent algorithms is widespread, but the number of iterations required to approximate optimal arguments can be prohibitive in high dimensional problems. Application of second order methods, on the other hand, is impracticable because computation of objective function Hessian inverses incurs excessive computational cost. BFGS modifies gradient descent by introducing a Hessian approximation matrix computed from finite gradient differences. RES utilizes stochastic gradients in lieu of deterministic gradients for both, the determination of descent directions and the approximation of the objective function's curvature. Since stochastic gradients can be computed at manageable computational cost RES is realizable and retains the convergence rate advantages of its deterministic counterparts. Convergence results show that lower and upper bounds on the Hessian egeinvalues of the sample functions are sufficient to guarantee convergence to optimal arguments. Numerical experiments showcase reductions in convergence time relative to stochastic gradient descent algorithms and non-regularized stochastic versions of BFGS. An application of RES to the implementation of support vector machines is developed.

  19. Overview of the software inspection process

    SciTech Connect

    Lane, G.L.; Dabbs, R.

    1997-11-01

    This tutorial introduces attendees to the Inspection Process and teaches them how to organize and participate in a software inspection. The tutorial advocates the benefits of inspections and encourages attendees to socialize the inspection process in their organizations.

  20. Identification and sorting of regular textures according to their similarity

    NASA Astrophysics Data System (ADS)

    Hernández Mesa, Pilar; Anastasiadis, Johannes; Puente León, Fernando

    2015-05-01

    Regardless whether mosaics, material surfaces or skin surfaces are inspected their texture plays an important role. Texture is a property which is hard to describe using words but it can easily be described in pictures. Furthermore, a huge amount of digital images containing a visual description of textures already exists. However, this information becomes useless if there are no appropriate methods to browse the data. In addition, depending on the given task some properties like scale, rotation or intensity invariance are desired. In this paper we propose to analyze texture images according to their characteristic pattern. First a classification approach is proposed to separate regular from non-regular textures. The second stage will focus on regular textures suggesting a method to sort them according to their similarity. Different features will be extracted from the texture in order to describe its scale, orientation, texel and the texel's relative position. Depending on the desired invariance of the visual characteristics (like the texture's scale or the texel's form invariance) the comparison of the features between images will be weighted and combined to define the degree of similarity between them. Tuning the weighting parameters allows this search algorithm to be easily adapted to the requirements of the desired task. Not only the total invariance of desired parameters can be adjusted, the weighting of the parameters may also be modified to adapt to an application-specific type of similarity. This search method has been evaluated using different textures and similarity criteria achieving very promising results.

  1. Industrial Inspection System

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Lixi, Inc. has built a thriving business on NASA-developed x-ray technology. The Low Intensity X-ray Imaging scope (LIXI) was designed to use less than one percent of radiation required by conventional x-ray devices. It is portable and can be used for a variety of industrial inspection systems as well as medical devices. A food processing plant uses the new LIXI Conveyor system to identify small bone fragments in chicken. The chicken packages on a conveyor belt enter an x-ray chamber and the image is displayed on a monitor. Defects measuring less than a millimeter can be detected. An important advantage of the system is its ability to inspect 100 percent of the product right on the production line.

  2. Tessellating the Sphere with Regular Polygons

    ERIC Educational Resources Information Center

    Soto-Johnson, Hortensia; Bechthold, Dawn

    2004-01-01

    Tessellations in the Euclidean plane and regular polygons that tessellate the sphere are reviewed. The regular polygons that can possibly tesellate the sphere are spherical triangles, squares and pentagons.

  3. Inspection challenges -- pigs versus pipes

    SciTech Connect

    Holden, E.M.; Grimes, K.

    1996-12-31

    As the size of the international pipeline network grows, and systems age (by the year 2000, over 50% of US gas transmission pipelines will be over 40 years old), and as environmental pressures increase, the demand for inspection is ever more apparent. Pipeline operations` experience has revealed many new defects and new inspection problems, many of which have challenged in-line inspection technology and stimulated further developments. This paper describes what pipeline inspection needs to find, the available technology and some examples of the inspection challenges.

  4. Infrared microscope inspection apparatus

    DOEpatents

    Forman, Steven E.; Caunt, James W.

    1985-02-26

    Apparatus and system for inspecting infrared transparents, such as an array of photovoltaic modules containing silicon solar cells, includes an infrared microscope, at least three sources of infrared light placed around and having their axes intersect the center of the object field and means for sending the reflected light through the microscope. The apparatus is adapted to be mounted on an X-Y translator positioned adjacent the object surface.

  5. Infrared microscope inspection apparatus

    DOEpatents

    Forman, S.E.; Caunt, J.W.

    1985-02-26

    Apparatus and system for inspecting infrared transparents, such as an array of photovoltaic modules containing silicon solar cells, includes an infrared microscope, at least three sources of infrared light placed around and having their axes intersect the center of the object field and means for sending the reflected light through the microscope. The apparatus is adapted to be mounted on an X-Y translator positioned adjacent the object surface. 4 figs.

  6. Inspection tester for explosives

    DOEpatents

    Haas, Jeffrey S.; Simpson, Randall L.; Satcher, Joe H.

    2007-11-13

    An inspection tester that can be used anywhere as a primary screening tool by non-technical personnel to determine whether a surface contains explosives. It includes a body with a sample pad. First and second explosives detecting reagent holders and dispensers are operatively connected to the body and the sample pad. The first and second explosives detecting reagent holders and dispensers are positioned to deliver the explosives detecting reagents to the sample pad. A is heater operatively connected to the sample pad.

  7. Inspection tester for explosives

    DOEpatents

    Haas, Jeffrey S.; Simpson, Randall L.; Satcher, Joe H.

    2010-10-05

    An inspection tester that can be used anywhere as a primary screening tool by non-technical personnel to determine whether a surface contains explosives. It includes a body with a sample pad. First and second explosives detecting reagent holders and dispensers are operatively connected to the body and the sample pad. The first and second explosives detecting reagent holders and dispensers are positioned to deliver the explosives detecting reagents to the sample pad. A is heater operatively connected to the sample pad.

  8. Code inspection instructional validation

    NASA Technical Reports Server (NTRS)

    Orr, Kay; Stancil, Shirley

    1992-01-01

    The Shuttle Data Systems Branch (SDSB) of the Flight Data Systems Division (FDSD) at Johnson Space Center contracted with Southwest Research Institute (SwRI) to validate the effectiveness of an interactive video course on the code inspection process. The purpose of this project was to determine if this course could be effective for teaching NASA analysts the process of code inspection. In addition, NASA was interested in the effectiveness of this unique type of instruction (Digital Video Interactive), for providing training on software processes. This study found the Carnegie Mellon course, 'A Cure for the Common Code', effective for teaching the process of code inspection. In addition, analysts prefer learning with this method of instruction, or this method in combination with other methods. As is, the course is definitely better than no course at all; however, findings indicate changes are needed. Following are conclusions of this study. (1) The course is instructionally effective. (2) The simulation has a positive effect on student's confidence in his ability to apply new knowledge. (3) Analysts like the course and prefer this method of training, or this method in combination with current methods of training in code inspection, over the way training is currently being conducted. (4) Analysts responded favorably to information presented through scenarios incorporating full motion video. (5) Some course content needs to be changed. (6) Some content needs to be added to the course. SwRI believes this study indicates interactive video instruction combined with simulation is effective for teaching software processes. Based on the conclusions of this study, SwRI has outlined seven options for NASA to consider. SwRI recommends the option which involves creation of new source code and data files, but uses much of the existing content and design from the current course. Although this option involves a significant software development effort, SwRI believes this option

  9. Waste Inspection Tomography (WIT)

    SciTech Connect

    Bernardi, R.T.

    1995-12-01

    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU. The mobile feature of WIT allows inspection technologies to be brought to the nuclear waste drum storage site without the need to relocate drums for safe, rapid, and cost-effective characterization of regulated nuclear waste. The combination of these WIT characterization modalities provides the inspector with an unprecedented ability to non-invasively characterize the regulated contents of waste drums as large as 110 gallons, weighing up to 1,600 pounds. Any objects that fit within these size and weight restrictions can also be inspected on WIT, such as smaller waste bags and drums that are five and thirty-five gallons.

  10. Laser Scanning In Inspection

    NASA Astrophysics Data System (ADS)

    West, Patricia; Baker, Lionel R.

    1989-03-01

    This paper is a review of the applications of laser scanning in inspection. The reasons for the choice of a laser in flying spot scanning and the optical properties of a laser beam which are of value in a scanning instrument will be given. The many methods of scanning laser beams in both one and two dimensions will be described. The use of one dimensional laser scanners for automatic surface inspection for transmitting and reflective products will be covered in detail, with particular emphasis on light collection techniques. On-line inspection applications which will be mentioned include: photographic film web, metal strip products, paper web, glass sheet, car body paint surfaces and internal cylinder bores. Two dimensional laser scanning is employed in applications where increased resolution, increased depth of focus, and better contrast are required compared with conventional vidicon TV or solid state array cameras. Such examples as special microscope laser scanning systems and a TV compatible system for use in restricted areas of a nuclear reactor will be described. The technical and economic benefits and limitations of laser scanning video systems will be compared with conventional TV and CCD array devices.

  11. Some Cosine Relations and the Regular Heptagon

    ERIC Educational Resources Information Center

    Osler, Thomas J.; Heng, Phongthong

    2007-01-01

    The ancient Greek mathematicians sought to construct, by use of straight edge and compass only, all regular polygons. They had no difficulty with regular polygons having 3, 4, 5 and 6 sides, but the 7-sided heptagon eluded all their attempts. In this article, the authors discuss some cosine relations and the regular heptagon. (Contains 1 figure.)

  12. Regular Pentagons and the Fibonacci Sequence.

    ERIC Educational Resources Information Center

    French, Doug

    1989-01-01

    Illustrates how to draw a regular pentagon. Shows the sequence of a succession of regular pentagons formed by extending the sides. Calculates the general formula of the Lucas and Fibonacci sequences. Presents a regular icosahedron as an example of the golden ratio. (YP)

  13. 22 CFR 120.39 - Regular employee.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Regular employee. 120.39 Section 120.39 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.39 Regular employee. (a) A regular employee means for purposes of this subchapter: (1) An...

  14. 22 CFR 120.39 - Regular employee.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Regular employee. 120.39 Section 120.39 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.39 Regular employee. (a) A regular employee means for purposes of this subchapter: (1) An...

  15. 22 CFR 120.39 - Regular employee.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Regular employee. 120.39 Section 120.39 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.39 Regular employee. (a) A regular employee means for purposes of this subchapter: (1) An...

  16. Natural frequency of regular basins

    NASA Astrophysics Data System (ADS)

    Tjandra, Sugih S.; Pudjaprasetya, S. R.

    2014-03-01

    Similar to the vibration of a guitar string or an elastic membrane, water waves in an enclosed basin undergo standing oscillatory waves, also known as seiches. The resonant (eigen) periods of seiches are determined by water depth and geometry of the basin. For regular basins, explicit formulas are available. Resonance occurs when the dominant frequency of external force matches the eigen frequency of the basin. In this paper, we implement the conservative finite volume scheme to 2D shallow water equation to simulate resonance in closed basins. Further, we would like to use this scheme and utilizing energy spectra of the recorded signal to extract resonant periods of arbitrary basins. But here we first test the procedure for getting resonant periods of a square closed basin. The numerical resonant periods that we obtain are comparable with those from analytical formulas.

  17. Pairing effect and misleading regularity

    NASA Astrophysics Data System (ADS)

    Al-Sayed, A.

    2015-11-01

    We study the nearest neighbor spacing distribution of energy levels of even-even nuclei classified according to their reduced electric quadrupole transition probability B (E2) ↑ using the available experimental data. We compare between Brody, and Abul-Magd distributions that extract the degree of chaoticity within nuclear dynamics. The results show that Abul-Magd parameter f can represents the chaotic behavior in more acceptable way than Brody, especially if a statistically significant study is desired. A smooth transition from chaos to order is observed as B (E2) ↑ increases. An apparent regularity was located at the second interval, namely: at 0.05 ≤ B (E2) < 0.1 in e2b2 units, and at 10 ≤ B (E2) < 15 in Weisskopf unit. Finally, the chaotic behavior parameterized in terms of B (E2) ↑ does not depend on the unit used.

  18. A Kinesthetic Learning Approach to Earth Science for 3rd and 4th Grade Students on the Pajarito Plateau, Los Alamos, NM

    NASA Astrophysics Data System (ADS)

    Wershow, H. N.; Green, M.; Stocker, A.; Staires, D.

    2010-12-01

    Current efforts towards Earth Science literacy in New Mexico are guided by the New Mexico Science Benchmarks [1]. We are geoscience professionals in Los Alamos, NM who believe there is an important role for non-traditional educators utilizing innovative teaching methods. We propose to further Earth Science literacy for local 3rd and 4th grade students using a kinesthetic learning approach, with the goal of fostering an interactive relationship between the students and their geologic environment. We will be working in partnership with the Pajarito Environmental Education Center (PEEC), which teaches the natural heritage of the Pajarito Plateau to 3rd and 4th grade students from the surrounding area, as well as the Family YMCA’s Adventure Programs Director. The Pajarito Plateau provides a remarkable geologic classroom because minimal structural features complicate the stratigraphy and dramatic volcanic and erosional processes are plainly on display and easily accessible. Our methodology consists of two approaches. First, we will build an interpretive display of the local geology at PEEC that will highlight prominent rock formations and geologic processes seen on a daily basis. It will include a simplified stratigraphic section with field specimens and a map linked to each specimen’s location to encourage further exploration. Second, we will develop and implement a kinesthetic curriculum for an exploratory field class. Active engagement with geologic phenomena will take place in many forms, such as a scavenger hunt for precipitated crystals in the vesicles of basalt flows and a search for progressively smaller rhyodacite clasts scattered along an actively eroding canyon. We believe students will be more receptive to origin explanations when they possess a piece of the story. Students will be provided with field books to make drawings of geologic features. This will encourage independent assessment of phenomena and introduce the skill of scientific observation. We

  19. Pellet inspection apparatus

    DOEpatents

    Wilks, Robert S.; Taleff, Alexander; Sturges, Jr., Robert H.

    1982-01-01

    Apparatus for inspecting nuclear fuel pellets in a sealed container for diameter, flaws, length and weight. The apparatus includes, in an array, a pellet pick-up station, four pellet inspection stations and a pellet sorting station. The pellets are delivered one at a time to the pick-up station by a vibrating bowl through a vibrating linear conveyor. Grippers each associated with a successive pair of the stations are reciprocable together to pick up a pellet at the upstream station of each pair and to deposit the pellet at the corresponding downstream station. The gripper jaws are opened selectively depending on the state of the pellets at the stations and the particular cycle in which the apparatus is operating. Inspection for diameter, flaws and length is effected in each case by a laser beam projected on the pellets by a precise optical system while each pellet is rotated by rollers. Each laser and its optical system are mounted in a container which is free standing on a precise surface and is provided with locating buttons which engage locating holes in the surface so that each laser and its optical system is precisely set. The roller stands are likewise free standing and are similarly precisely positioned. The diameter optical system projects a thin beam of light which scans across the top of each pellet and is projected on a diode array. The fl GOVERNMENT CONTRACT CLAUSE The invention herein described was made in the course of or under a contract or subcontract thereunder with the Department of Energy bearing No. EY-67-14-C-2170.

  20. Laser Safety Inspection Criteria

    SciTech Connect

    Barat, K

    2005-06-13

    A responsibility of the Laser Safety Officer (LSO) is to perform laser audits. The American National Standard Z136.1 Safe Use of Lasers references this requirement through several sections. One such reference is Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''. The composition, frequency and rigor of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms It is common for audit findings from one inspector or inspection to the next to vary even when reviewing the same material. How often has one heard a comment, ''well this area has been inspected several times over the years and no one ever said this or that was a problem before''. A great number of audit items, and therefore findings, are subjective because they are based on the experience and interest of the auditor to particular items on the checklist. Beam block usage, to one set of eyes might be completely adequate, while to another, inadequate. In order to provide consistency, the Laser Safety Office of the National Ignition Facility Directorate has established criteria for a number of items found on the typical laser safety audit form. The criteria are distributed to laser users. It serves two broad purposes; first, it gives the user an expectation of what will be reviewed by an auditor. Second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items, such as labelling of beam blocks.

  1. Dimensional regularization of local singularities in the fourth post-Newtonian two-point-mass Hamiltonian

    NASA Astrophysics Data System (ADS)

    Jaranowski, Piotr; Schäfer, Gerhard

    2013-04-01

    The article delivers the only still unknown coefficient in the 4th post-Newtonian energy expression for binary point masses on circular orbits as a function of orbital angular frequency. Apart from a single coefficient, which is known solely numerically, all the coefficients are given as exact numbers. The shown Hamiltonian is presented in the center-of-mass frame and out of its 57 coefficients, 51 are given fully explicitly. Those coefficients are six coefficients more than previously achieved [P. Jaranowski and G. Schäfer, Phys. Rev. D 86, 061503(R) (2012)PRVDAQ1550-7998]. The local divergences in the point-mass model are uniquely controlled by the method of dimensional regularization. As an application, the last stable circular orbit is determined as a function of the symmetric-mass-ratio parameter.

  2. Bridge inspection in Kansas

    NASA Astrophysics Data System (ADS)

    Whisler, Don E.

    1995-05-01

    The purpose of this paper is to give the reader a brief insight into the Kansas Department of Transportation (KDOT) Bridge Inspection Program. The State of Kansas has 25,580 bridge length structures within its boundaries used to carry vehicle traffic or pedestrians, excluding railroad. This total ranks third within the nation according to the November issue of 'Better Roads.' The total number of structures listed includes 20,453 structures owned by local governments, 340 structures owned by the Kansas Turnpike Authority, and 4,787 structures owned by the KDOT. This paper will deal specifically with the KDOT structures only.

  3. Acoustic inspection device

    DOEpatents

    Diaz, Aaron A.; Burghard, Brion J.; Skorpik, James R.; Pappas, Richard A.; Mullen, O. Dennis; Samuel, Todd J.; Reid, Larry D.; Harris, Joe C.; Valencia, Juan D.; Smalley, Jonathan T.; Shepard, Chester L.; Taylor, Theodore T.

    2005-09-06

    An ultrasound inspection apparatus particularly adapted to examine containers (sealed or unsealed) containing a liquid or solid bulk material. The apparatus has an overall configuration of a hand held pistol with a front transducer contact surface that is positioned against a front wall of the container. An ultrasound pulse is transmitted from the apparatus to be reflected from a back wall of a container being investigated. The received echo pulse is converted to a digital waveform. The waveform is analyzed relative to temperature, travel distance of the pulse(s), and time of travel to ascertain characteristics of the liquid or other materials and to provide identification of the same.

  4. Fluorescent penetrant inspection

    NASA Technical Reports Server (NTRS)

    Sastri, Sankar

    1990-01-01

    The purpose of this experiment is to familiarize the student with fluorescent penetrant inspection and to relate it to classification of various defects. The penetrant method of nondestructive testing is a method for finding discontinuities open to the surface in solids and essentially nonporous bodies. The method employs a penetrating liquid which is applied over the surface and enters the discontinuity or crack. After the excess of penetrant has been cleaned from the surface, the penetrant which exudes or is drawn back out of the crack indicates the presence and location of a discontinuity. The experimental procedure is described.

  5. Ceramic inspection system

    DOEpatents

    Werve, Michael E.

    2006-05-16

    A system for inspecting a ceramic component. The ceramic component is positioned on a first rotary table. The first rotary table rotates the ceramic component. Light is directed toward the first rotary table and the rotating ceramic component. A detector is located on a second rotary table. The second rotary table is operably connected to the first rotary table and the rotating ceramic component. The second rotary table is used to move the detector at an angle to the first rotary table and the rotating ceramic component.

  6. Ultrasonic inspection of reactor systems

    SciTech Connect

    Majzlik, E.J. Jr.

    1989-01-01

    The subject of this presentation is ultrasonic inspection of reactor systems. This paper describes two current programs underway at Savannah River Site which provide state-of-the-art ultrasonic inspections of weld heat-affected zones in the primary cooling loop of the Savannah River Site reactors. It also describes the automated remote inspection equipment being developed and employed; briefly describe the procedures being used; and give you a general idea of the future direction of two major programs: Moderator Piping Inspection Program and the Reactor Tank Wall Weld Inspection Program. The objective of these programs is to provide inspection techniques to more fully determine the condition of the reactor primary system and provide data for prediction of maintenance needs and remaining service life. Detection and sizing of intergranular stress corrosion cracking is the focus of these programs.

  7. Opportunities and Limitation of Hyporheic Restoration in a 4th Order Semi-Arid Floodplain: a Case Study of Meacham Creek, Oregon

    NASA Astrophysics Data System (ADS)

    O'Daniel, S. J.; Amerson, B. E.; Lambert, M. B.

    2014-12-01

    Persistent societal interest in improving water quality and recovering imperiled, native, aquatic species has expanded the scope of stream restoration to include the hyporheic zone as a focus. Despite the lack of detailed studies, hyporheic restoration is often invoked as a means to achieve multiple objectives including moderation of water temperature, delay of seasonal flows and increasing the localized volume of floodplain water. We present interim results from an ongoing case study that monitors the changes as a result of stream restoration of the hyporheic zone of a 4th order, alluvial floodplain in northeast Oregon, USA, Meacham Creek. Active and passive restoration of 2.5 km of Meacham Creek has altered the creek from a single-threaded, incised and bedrock-dominated channel to a perched, alluvial channel that seasonally exchanges overbank flows with the surrounding floodplain. Our results suggest that the stream restoration effort on Meacham Creek has increased the volume of annual hyporheic storage and created a more diverse distribution of flowpath lengths within the restoration site. Furthermore, our monitoring indicates that hyporheic process response to stream restoration, analogous to other geomorphic processes, conforms to a systematic hierarchy where nested flow paths range in length and residence time from meters and hours at the habitat scale to tens of meters and months at the floodplain scale. We assert that scale-explicit and measurement-focused restoration planning has a greater likelihood of meeting the stated objectives and result in improved water quality and encourage recovery of many native aquatic species.

  8. Status and Trend of Regal Fritillary (Speyeria idalia) (Lepidoptera: Nymphalidae) in the 4th of July Butterfly Count Program in 1977-2014.

    PubMed

    Swengel, Scott R; Swengel, Ann B

    2016-01-01

    Regal Fritillary (Speyeria idalia) primarily inhabits prairie, a native grassland of central North America, and occurs rarely in nonprairie grasslands further east. This butterfly has experienced widespread decline and marked range contraction. We analyze Regal Fritillary incidence and abundance during 1977-2014 in 4th of July Butterfly Counts, an annual census of butterflies in North America. Volunteers count within the same 24 km diameter circle each year. Only 6% of counts in range reported a Regal, while 18% of counts in core range in the Midwest and Great Plains did. 99.9% of Regal individuals occurred in core range. Only four circles east of core range reported this species, and only during the first half of the study period. All individuals reported west of its main range occurred in two circles in Colorado in the second half of the study. The number of counts per year and survey effort per count increased during the study. During 1991-2014, >31 counts occurred per year in core Regal range, compared to 0-23 during 1975-1990. During 1991-2014, all measures of Regal presence and abundance declined, most significantly. These results agree with other sources that Regal Fritillary has contracted its range and declined in abundance. PMID:27239370

  9. Evidence of human-induced morphodynamic changes along the Campania coastal areas (southern Italy) since the 3rd-4th cent. AD

    NASA Astrophysics Data System (ADS)

    Russo Ermolli, Elda; Romano, Paola; Liuzza, Viviana; Amato, Vincenzo; Ruello, Maria Rosaria; Di Donato, Valentino

    2014-05-01

    Campania has always offered suitable climatic and physiographic conditions for human settlements since prehistoric times. In particular, many Graeco-Roman towns developed along its coasts starting from the 7th-6th cent. BC. In the last decade, geoarchaelogical surveys have been carried out in the archaeological excavations of Neapolis, Paestum and Elea-Velia allowing the main steps of the landscape evolution around these towns to be defined in detail. The greek town of Neapolis rose in the late 6th cent. BC [1] on a terrace overlooking a low-relief rocky coast surrounded by volcanic hills. Port activities developed in a protected bay facing the town from the 4th-2nd cent. BC up to the 4th cent. AD, as testified by the discovery of structures and shipwrecks [2, 3, 4]. Starting from the 3rd cent. AD a spit bar formed at the bay entrance causing the progressive establishment of a lagoon which was gradually filled up by alluvial inputs and completely closed in the 5th cent. AD. During the same period, episodes of increased alluvial inputs were also recorded further west along the coast, where a narrow sandy beach formed at the cliff toe. The greek town of Poseidonia, renamed Paestum by the Romans, was founded in the 540 BC on a travertine terrace facing the sandy littoral of a prograding coastal plain [5]. In front of the main town door, a coastal lagoon developed thanks to the growth of a dune ridge and was probably used for harbor activities [5]. After this period the shoreline shifted seawards, another dune ridge formed and the back-ridge depression was filled with fluvial-marshy deposits, slowly drying up. Phases of travertine deposition, which characterized the SE sector of the plain all along the Holocene, were recorded in the northern and southern quarters of the town in historical times and were connected to the abandonment of the town in the early Medieval times. The greek colony of Elea-Velia was located on top of a siliciclastic promontory where the ruins of

  10. Status and Trend of Regal Fritillary (Speyeria idalia) (Lepidoptera: Nymphalidae) in the 4th of July Butterfly Count Program in 1977–2014

    PubMed Central

    2016-01-01

    Regal Fritillary (Speyeria idalia) primarily inhabits prairie, a native grassland of central North America, and occurs rarely in nonprairie grasslands further east. This butterfly has experienced widespread decline and marked range contraction. We analyze Regal Fritillary incidence and abundance during 1977–2014 in 4th of July Butterfly Counts, an annual census of butterflies in North America. Volunteers count within the same 24 km diameter circle each year. Only 6% of counts in range reported a Regal, while 18% of counts in core range in the Midwest and Great Plains did. 99.9% of Regal individuals occurred in core range. Only four circles east of core range reported this species, and only during the first half of the study period. All individuals reported west of its main range occurred in two circles in Colorado in the second half of the study. The number of counts per year and survey effort per count increased during the study. During 1991–2014, >31 counts occurred per year in core Regal range, compared to 0–23 during 1975–1990. During 1991–2014, all measures of Regal presence and abundance declined, most significantly. These results agree with other sources that Regal Fritillary has contracted its range and declined in abundance. PMID:27239370

  11. Future perspectives in melanoma research. Meeting report from the “Melanoma Bridge. Napoli, December 2nd-4th 2012”

    PubMed Central

    2013-01-01

    Recent insights into the genetic and somatic aberrations have initiated a new era of rapidly evolving targeted and immune-based treatments for melanoma. After decades of unsuccessful attempts to finding a more effective cure in the treatment of melanoma now we have several drugs active in melanoma. The possibility to use these drugs in combination to improve responses to overcome the resistance, to potentiate the action of immune system with the new immunomodulating antibodies, and identification of biomarkers that can predict the response to a particular therapy represent new concepts and approaches in the clinical management of melanoma. The third “Melanoma Research: “A bridge from Naples to the World” meeting, shortened as “Bridge Melanoma Meeting” took place in Naples, December 2 to 4th, 2012. The four topics of discussion at this meeting were: advances in molecular profiling and novel biomarkers, combination therapies, novel concepts toward integrating biomarkers and therapies into contemporary clinical management of patients with melanoma across the entire spectrum of disease stage, and the knowledge gained from the biology of tumor microenvironment across different tumors as a bridge to impact on prognosis and response to therapy in melanoma. This international congress gathered more than 30 international faculty members who in an interactive atmosphere which stimulated discussion and exchange of their experience regarding the most recent advances in research and clinical management of melanoma patients. PMID:23731854

  12. Dynamics of the properties of steppe paleosols of the Sarmatian time (2nd century BC-4th century AD) in relation to secular variations in climatic humidity

    NASA Astrophysics Data System (ADS)

    Demkin, V. A.; Zolotareva, B. N.; Demkina, T. S.; Khomutova, T. E.; Kashirskaya, N. N.; El'Tsov, M. V.; Udal'Tsov, S. N.

    2012-02-01

    Paleosols buried under kurgans of the Early (2nd-1st centuries BC), Middle (1st-2nd centuries AD) and Late (2nd-IV centuries AD) Sarmatian epochs were studied in dry steppes and desert steppes of the Lower Volga region (the Privolzhskaya and Ergeni Uplands and the Caspian Lowland). It was found that temporal variations in the morphological, chemical, microbiological, and magnetic properties of the paleosols in the interval of 2200-1600 BP were characterized by the cyclic pattern related to secular dynamics of climatic humidity with changes in the mean annual precipitation of ±30-50 mm. These climate changes did not transform chestnut paleosols and paleosolonetzes at the type or subtype taxonomic levels. However, they led to certain changes in the humus, carbonate, and salt profiles of the soils; in the character of solonetzic horizon B1; and in the state of microbial communities. According to these data, the Sarmatian time was characterized by alternation of micropluvial and microarid stages lasting fro about 100-200 years. In particular, the stages of humidization were observed in the 1st century BC-1st century AD and in the 4th century AD; the most arid conditions were observed in the second half of the 2nd and the first half of the 3rd century AD.

  13. Integrating data and mashup concepts in Hydro-Meteorological Research: the torrential rainfall event in Genoa (4th November 2011) case study.

    NASA Astrophysics Data System (ADS)

    Bedrina, T.; Parodi, A.; Quarati, A.; Clematis, A.; Rebora, N.; Laiosa, D.

    2012-04-01

    One of the critical issues in Hydro-Meteorological Research (HMR) is a better exploitation of data archives according to a multidisciplinary perspective. Different Earth science databases offer a huge amount of observational data, which often need to be assembled, processed, combined accordingly HM scientists needs. The cooperation between scientists active in HMR and Information and Communication Technologies (ICT) is essential in the development of innovative tools and applications for manipulating, aggregating and re-arranging heterogeneous information in flexible way. In this paper it is described an application devoted to the collection and integration of HM datasets, originated by public or private sources, freely exposed via Web services API. This application uses the mashup, recently become very popular in many fields, (Chow S.-W., 2007) technology concepts. Such methodology means combination of data and/or programs published by external online sources into an integrated experience. Mashup seems to be a promising methodology to respond to the multiple data-related activities into which HM researchers are daily involved (e.g. finding and retrieving high volume data; learning formats and developing readers; extracting parameters; performing filtering and mask; developing analysis and visualization tools). The specific case study of the recent extreme rainfall event, occurred over Genoa in Italy on the 4th November 2011 is shown through the integration of semi-professional weather observational networks as free available data source in addition to official weather networks.

  14. Waste inspection tomography (WIT)

    SciTech Connect

    Bernardi, R.T.

    1995-10-01

    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting, isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU.

  15. Thermographic Inspection of Aerospace Tankage

    NASA Technical Reports Server (NTRS)

    Bouvier, Carl; Russell, Samuel; Walker, James; Wilkerson, Chuck

    2003-01-01

    Thermography has been shown to be the ideal technical and economic inspection method for two applications - post-machining evaluations and for field inspections of damage and repair. For most manufacturing applications ultrasonic inspections are already available and established. There is no question about the detectability or cost when inspecting hardware out of the autoclave. But when the part is too large to bring to the scanning inspection system or you do not want to remove the hardware from its current setup then a more portable or field applicable inspection is required. This paper will describe two applications of thermography on composite inspections. The NASA NDE Team and Lockheed Martin conducted the work at NASA s George C. Marshall Space Flight Center (MSFC). The first application was inspecting machined hardware. The technique and example data will be presented along with the advantages of thermography. Examples of drilling holes and trimming the edges will be discussed. The second application will be the evaluation of damage in a composite part and the subsequent repair of the region will be presented. The technique, data, and benefits of this application will also be presented along with the follow-up inspection of the post- repaired hardware.

  16. Laser Safety Inspection Criteria

    SciTech Connect

    Barat, K

    2005-02-11

    A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

  17. 49 CFR 213.365 - Visual inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Visual inspections. 213.365 Section 213.365... Visual inspections. (a) All track shall be visually inspected in accordance with the schedule prescribed..., electrical, and other track inspection devices may be used to supplement visual inspection. If a vehicle...

  18. 49 CFR 213.365 - Visual inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Visual inspections. 213.365 Section 213.365... Visual inspections. (a) All track shall be visually inspected in accordance with the schedule prescribed..., electrical, and other track inspection devices may be used to supplement visual inspection. If a vehicle...

  19. 46 CFR 169.237 - Inspection standards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for...

  20. 46 CFR 169.255 - Sanitary inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for...

  1. 46 CFR 169.255 - Sanitary inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for...

  2. 46 CFR 169.237 - Inspection standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for...

  3. 46 CFR 169.255 - Sanitary inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for...

  4. 46 CFR 169.255 - Sanitary inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for...

  5. 46 CFR 169.237 - Inspection standards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for...

  6. 46 CFR 169.237 - Inspection standards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for...

  7. 46 CFR 169.255 - Sanitary inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for...

  8. 46 CFR 169.237 - Inspection standards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for...

  9. Grain quality inspection system

    NASA Technical Reports Server (NTRS)

    Flood, C. A., Jr.; Singletow, D. P.; James, S. N.

    1979-01-01

    A review of grain quality indicators and measurement methods was conducted in order to assess the feasibility of using remote sensing technology to develop a continuous monitoring system for use during grain transfer operations. Most detection methods were found to be too slow or too expensive to be incorporated into the normal inspection procedure of a grain elevator on a continuous basis. Two indicators, moisture content and broken corn and foreign material, show potential for automation and are of an economic value. A microprocessor based system which utilizes commercially available electronic moisture meter was developed and tested. A method for automating BCFM measurement is described. A complete system description is presented along with performance test results.

  10. Industrial Inspection System

    NASA Technical Reports Server (NTRS)

    1993-01-01

    ACTIS+ is a smaller, personal computer version of ACTIS, a computed tomography system which finds its origins in the Apollo lunar landing research. It is used to identify imperfections in aerospace structures and components. Designed to be added to an existing real time radiography system, its components include a high precision rotation/elevation manipulator, color image monitor, graphical user interface monitor, and PC compatible workstation. Cross-sectional CT images are more detailed than radiographic images and the high speed scanning feature offers the capability for 100 percent inspection in a production environment. Bio-Imaging Research, Inc. (BIR) originally developed ACTIS for Marshall Space Flight Center (MSFC), and commercial units were sold to aerospace manufacturers. The technology was refined for ACTIS+, which is principally used in non-destructive testing.

  11. Peripheral inspection of objects

    NASA Astrophysics Data System (ADS)

    Asundi, A.; Sajan, M. R.

    The inspection and profilometry of curved objects is an interesting problem in industrial machine vision. The application of a CCD camera operating in the time delay and integration (TDI) mode, for imaging and contouring the complete periphery of curved objects, is described in this paper. The experimental arrangement is based on projection moiré principles. Rotation of the curved object permits the TDI camera to record a grating pattern modulated by any defect or deformation on the object. Equal depth contours are derived from the deformed grating pattern by using the logical moiré and the scanning moiré techniques. Details of the experimental setup and the moiré contouring principles are explained. The capability of the system is demonstrated by recording the contours of a dented can and a mannequin head.

  12. TPS Inspection and Repair

    NASA Technical Reports Server (NTRS)

    Parazynski, Scott

    2012-01-01

    Dr. Scott Parazynski provided a retrospective on the EVA tools and procedures efforts NASA went through in the aftermath of Columbia for the Shuttle Thermal Protection System (TPS) inspection and repair. He describes his role as the lead astronaut on this effort, and covered all of the Neutral Buoyancy Lab (NBL), KC 135 (reduced gravity aircraft), Precision Air Bearing Floor (PABF), vacuum chamber and 1 G testing that was done in order to develop the tools and techniques that were flown. Parazynski also discusses how the EVA community worked together to resolve a huge safety issue, and how his work in the spacesuit was critical to overcoming a design limitation of the Space Shuttle.

  13. Robotics and industrial inspection

    SciTech Connect

    Casasent, D.P.

    1983-01-01

    Image processing algorithms are discussed, taking into account hidden information in early visual processing, three-dimensional shape recognition by moirecorrelation, spatial-frequency representations of images with scale invariant properties, image-based focusing, the computational structure for the Walsh-Hadamard transform, a hybrid optical/digital moment-based robotic pattern recognition system, affordable implementations of image processing algorithms, and an analysis of low-level computer vision algorithms for implementation on a very large scale integrated processor array. Other topics considered are related to government programs and needs in robotics, DoD research and applications in robotics, time-varying image processing and control, industrial robotics, industrial applications of computer vision, and object perception and mensuration for robotics. Attention is given to laser scanning techniques for automatic inspection of heat-sealed film packages, computer software for robotic vision, and computerized tomography on a logarithmic polar grid.

  14. Inspection system calibration methods

    DOEpatents

    Deason, Vance A.; Telschow, Kenneth L.

    2004-12-28

    An inspection system calibration method includes producing two sideband signals of a first wavefront; interfering the two sideband signals in a photorefractive material, producing an output signal therefrom having a frequency and a magnitude; and producing a phase modulated operational signal having a frequency different from the output signal frequency, a magnitude, and a phase modulation amplitude. The method includes determining a ratio of the operational signal magnitude to the output signal magnitude, determining a ratio of a 1st order Bessel function of the operational signal phase modulation amplitude to a 0th order Bessel function of the operational signal phase modulation amplitude, and comparing the magnitude ratio to the Bessel function ratio.

  15. Fire Inspection Guide for Schools.

    ERIC Educational Resources Information Center

    Virginia State Corp. Commission, Richmond.

    A functional explanation of the "School Fire Prevention Inspection Form" is provided for use by local school and fire department personnel in the Virginia School Fire Prevention Inspection Program. Many helpful suggestions are made for safeguarding occupants of public school buildings from fire hazards. Items discussed are--(1) exit doors, (2)…

  16. Pipe inspection and repair system

    NASA Technical Reports Server (NTRS)

    Schempf, Hagen (Inventor); Mutschler, Edward (Inventor); Chemel, Brian (Inventor); Boehmke, Scott (Inventor); Crowley, William (Inventor)

    2004-01-01

    A multi-module pipe inspection and repair device. The device includes a base module, a camera module, a sensor module, an MFL module, a brush module, a patch set/test module, and a marker module. Each of the modules may be interconnected to construct one of an inspection device, a preparation device, a marking device, and a repair device.

  17. Wavelet Regularization Per Nullspace Shuttle

    NASA Astrophysics Data System (ADS)

    Charléty, J.; Nolet, G.; Sigloch, K.; Voronin, S.; Loris, I.; Simons, F. J.; Daubechies, I.; Judd, S.

    2010-12-01

    Wavelet decomposition of models in an over-parameterized Earth and L1-norm minimization in wavelet space is a promising strategy to deal with the very heterogeneous data coverage in the Earth without sacrificing detail in the solution where this is resolved (see Loris et al., abstract this session). However, L1-norm minimizations are nonlinear, and pose problems of convergence speed when applied to large data sets. In an effort to speed up computations we investigate the application of the nullspace shuttle (Deal and Nolet, GJI 1996). The nullspace shuttle is a filter that adds components from the nullspace to the minimum norm solution so as to have the model satisfy additional conditions not imposed by the data. In our case, the nullspace shuttle projects the model on a truncated basis of wavelets. The convergence of this strategy is unproven, in contrast to algorithms using Landweber iteration or one of its variants, but initial computations using a very large data base give reason for optimism. We invert 430,554 P delay times measured by cross-correlation in different frequency windows. The data are dominated by observations with US Array, leading to a major discrepancy in the resolution beneath North America and the rest of the world. This is a subset of the data set inverted by Sigloch et al (Nature Geosci, 2008), excluding only a small number of ISC delays at short distance and all amplitude data. The model is a cubed Earth model with 3,637,248 voxels spanning mantle and crust, with a resolution everywhere better than 70 km, to which 1912 event corrections are added. In each iteration we determine the optimal solution by a least squares inversion with minimal damping, after which we regularize the model in wavelet space. We then compute the residual data vector (after an intermediate scaling step), and solve for a model correction until a satisfactory chi-square fit for the truncated model is obtained. We present our final results on convergence as well as a

  18. Bridging the US and China together to conquer cancer: report of the 4th annual meeting of the US Chinese Anti-Cancer Association (USCACA)

    PubMed Central

    Yang, Wancai; Guan, Lingjie

    2012-01-01

    A global collaborative effort is pivotal to conquer cancer. Themed “Emerging role of China in global clinical development of novel anti-cancer drugs”, the US Chinese Anti-Cancer Association (USCACA) held its 4th annual meeting in Chicago on June 2, 2012, in conjunction with the American Society of Clinical Oncology (ASCO) annual meeting to further bridge the US and China together to outsmart cancer. Although a young organization, USCACA has made significant contributions to this goal in the 3 years since its inception through extensive collaboration with academic organizations, the pharmaceutical industry, and governmental agencies. USCACA has engaged various stakeholders in developing translational and personalized medical strategies to facilitate new anti-cancer drug development and clinical trials in China. USCACA has initiated and implemented the USCACA-National Foundation for Cancer Research (NFCR) scholarship to encourage overseas returnees to continue cancer research in China. USCACA announced the Hengrui-USCACA scholarship to fund clinical trial staff from China to conduct the observation of early oncologic clinical trials in the US. During the annual meeting, distinguished panelists and the audience discussed the following critical topics: (1) oncologic translational research and early development capabilities in China; (2) novel chemical entity development and partnership with Chinese companies; and (3) Chinese participation in global anti-cancer drug development. USCACA will continue to promote collaborations among cancer researchers and clinicians in the US and China by engaging in more frequent communications and joint efforts across fields, disciplines, and countries, diligently working together toward curing and eliminating cancers. PMID:22739264

  19. Changes in the regional prevalence of child obesity in 4th, 8th, and 11th grade students in Texas from 2000-2002 to 2004-2005.

    PubMed

    Hoelscher, Deanna M; Kelder, Steven H; Pérez, Adriana; Day, R Sue; Benoit, Julia S; Frankowski, Ralph F; Walker, Joey L; Lee, Eun S

    2010-07-01

    Although national and state estimates of child obesity are available, data at these levels are insufficient to monitor effects of local obesity prevention initiatives. The purpose of this study was to examine regional changes in the prevalence of obesity due to statewide policies and programs among children in grades 4, 8, and 11 in Texas Health Services Regions (HSRs) between 2000-2002 and 2004-2005, and nine selected counties in 2004-2005. A cross-sectional, probability-based sample of 23,190 Texas students in grades 4, 8, and 11 were weighed and measured to obtain BMI. Obesity was >95th percentile for BMI by age/sex using Centers for Disease Control and Prevention growth charts. Child obesity prevalence significantly decreased between 2000-2002 and 2004-2005 for 4th grade students in the El Paso HSR (-7.0%, P = 0.005). A leveling off in the prevalence of obesity was noted for all other regions for grades 4, 8, and 11. County-level data supported the statistically significant decreases noted in the El Paso region. The reduction of child obesity levels observed in the El Paso area is one of the few examples of effective programs and policies based on a population-wide survey: in this region, a local foundation funded extensive regional implementation of community programs for obesity prevention, including an evidence-based elementary school-based health promotion program, adult nutrition and physical activity programs, and a radio and television advertising campaign. Results emphasize the need for sustained school, community, and policy efforts, and that these efforts can result in decreases in child obesity at the population level. PMID:19798066

  20. A prototype for computer management of petroleum data and generation of maps and sections using 4th dimension{sup {trademark}}

    SciTech Connect

    French, D.E.; McBane, J.D.

    1996-06-01

    A commercial relational database program available for Macintosh and Windows-based computers known as 4th Dimension, has been adapted for use as a tool for storage, manipulation, and presentation of petroleum industry data. The database organization, input and output layouts, and manipulation routines are collectively referred to as WellFile4. Well data, land-survey data, production statistics, and stratigraphic information can be entered into the database from the keyboard or by importing files purchased from data vendors. The data can then be organized into files that can be searched and sorted based upon user-defined criteria. Selected subsets of data can be printed in various custom report formats. A graphics-editing module, 4D Draw, is used to generate maps, cross sections, and borehole-completion profiles. Maps can incorporate well-header information, formation tops, isopach values, or production data. Production data can also be presented as a bubble map. Maps can also include data selected from tables generated by a spreadsheet module, 4D Calc. Seismic-time values can be treated with appropriate velocity functions using the spreadsheet to derive depth values for posting to the base map. Structural or stratigraphic cross sections can be generated by selecting wells or seismic shot points from a map, and vertical exaggeration can be determined by the user. Maps can be modified extensively by the user before printing or plotting, and can be saved as a document that can be opened by other programs. Production statistics can be compiled based upon location, stratigraphic interval, or other criteria into a single set of data and presented as a chart or table. These can be printed or saved as a text file for use by other spreadsheet or chart-generation programs.

  1. Cardiovascular screening in adolescents and young adults: a prospective study comparing the Pre-participation Physical Evaluation Monograph 4th Edition and ECG

    PubMed Central

    Fudge, Jessie; Harmon, Kimberly G; Owens, David S; Prutkin, Jordan M; Salerno, Jack C; Asif, Irfan M; Haruta, Alison; Pelto, Hank; Rao, Ashwin L; Toresdahl, Brett G; Drezner, Jonathan A

    2015-01-01

    Background This study compares the accuracy of cardiovascular screening in active adolescents and young adults using a standardised history, physical examination and resting 12-lead ECG. Methods Participants were prospectively screened using a standardised questionnaire based on the Pre-participation Physical Evaluation Monograph 4th Edition (PPE-4), physical examination and ECG interpreted using modern standards. Participants with abnormal findings had focused echocardiography and further evaluation. Primary outcomes included disorders associated with sudden cardiac arrest (SCA). Results From September 2010 to July 2011, 1339 participants underwent screening: age 13–24 (mean 16) years, 49% male, 68% Caucasian, 17% African-American and 1071 (80%) participating in organised sports. Abnormal history responses were reported on 916 (68%) questionnaires. After physician review, 495/ 916 (54%) participants with positive questionnaires were thought to have non-cardiac symptoms and/or a benign family history and did not warrant additional evaluation. Physical examination was abnormal in 124 (9.3%) participants, and 72 (5.4%) had ECG abnormalities. Echocardiograms were performed in 586 (44%) participants for abnormal history (31%), physical examination (8%) or ECG (5%). Five participants (0.4%) were identified with a disorder associated with SCA, all with ECG-detected Wolff-Parkinson-White. The false-positive rates for history, physical examination and ECG were 31.3%, 9.3% and 5%, respectively. Conclusions A standardised history and physical examination using the PPE-4 yields a high false-positive rate in a young active population with limited sensitivity to identify those at risk for SCA. ECG screening has a low false-positive rate using modern interpretation standards and improves detection of primary electrical disease at risk of SCA. PMID:24948082

  2. Application of the FUN3D Unstructured-Grid Navier-Stokes Solver to the 4th AIAA Drag Prediction Workshop Cases

    NASA Technical Reports Server (NTRS)

    Lee-Rausch, Elizabeth M.; Hammond, Dana P.; Nielsen, Eric J.; Pirzadeh, S. Z.; Rumsey, Christopher L.

    2010-01-01

    FUN3D Navier-Stokes solutions were computed for the 4th AIAA Drag Prediction Workshop grid convergence study, downwash study, and Reynolds number study on a set of node-based mixed-element grids. All of the baseline tetrahedral grids were generated with the VGRID (developmental) advancing-layer and advancing-front grid generation software package following the gridding guidelines developed for the workshop. With maximum grid sizes exceeding 100 million nodes, the grid convergence study was particularly challenging for the node-based unstructured grid generators and flow solvers. At the time of the workshop, the super-fine grid with 105 million nodes and 600 million elements was the largest grid known to have been generated using VGRID. FUN3D Version 11.0 has a completely new pre- and post-processing paradigm that has been incorporated directly into the solver and functions entirely in a parallel, distributed memory environment. This feature allowed for practical pre-processing and solution times on the largest unstructured-grid size requested for the workshop. For the constant-lift grid convergence case, the convergence of total drag is approximately second-order on the finest three grids. The variation in total drag between the finest two grids is only 2 counts. At the finest grid levels, only small variations in wing and tail pressure distributions are seen with grid refinement. Similarly, a small wing side-of-body separation also shows little variation at the finest grid levels. Overall, the FUN3D results compare well with the structured-grid code CFL3D. The FUN3D downwash study and Reynolds number study results compare well with the range of results shown in the workshop presentations.

  3. Image transformation into device-dependent color printer description using 4th-order polynomial regression and object-oriented programming development of image processing modules

    NASA Astrophysics Data System (ADS)

    Mongeon, Michael C.

    1996-03-01

    This paper investigates the development of printer device profiles used in color document printing system environments when devices with intrinsically different gamut capabilities communicate with one another in a common (CIELAB) color space. While the main thrust of this activity focuses on the output printer, namely the Xerox 5760 printer, and its rendition of some device independent image description, characterizations are provided which investigate relative areas of photographic, monitor, and printer gamuts using a visual hue leaf comparison between devices. The printer is modeled using 4th-order polynomial regression which maps the device independent CIELAB image representation into device dependent printer CMYK. This technique results in 1.89 AEEavg over the training data set. Some key properties of the proposed calibration method are as follows: (1) Linearized CMYK tone reproduction curves with respect to AEEpaper to improve the distribution of calibration data in color space. (2) Application of GCR strategy and linearization to the calibration target prior to the regression on the measured CIELAB and original CMY values. Each strategy employs a K addition/No CMY removal method which maximizes printer gamut and relies on the regression to determine the appropriate CMY removal. The following GCR strategies are explored: CMY only (0% K addition), 50% K addition, 100% K addition, and non-linear K addition. A library of image processing algorithms is included, using LabView object oriented programming, which provides a modular approach for key color processing tasks. In the user interface, an image is selected with appropriate GCR strategy, and the program operates on the image. In general, the pictorial image quality is excellent for each GCR strategy with subtle differences between GCR approaches. Quantitative analysis of Q60 color matching performance is included.

  4. Relationship between Long Working Hours and Suicidal Thoughts: Nationwide Data from the 4th and 5th Korean National Health and Nutrition Examination Survey

    PubMed Central

    Yoon, Jin-Ha; Jung, Pil Kyun; Roh, Jaehoon; Seok, Hongdeok; Won, Jong-Uk

    2015-01-01

    Background Long working hours are a worldwide problem and may increase the risk of various health issues. However, the health effects of long working hours on suicidal thoughts have not been frequently studied. Our goal was to investigate the relationship between long working hours and suicidal thoughts in the rapidly developing country of Korea. Methods Data from 12,076 participants (7,164 men, 4,912 women) from the 4th and 5th Korean National Health and Nutrition Examination Surveys were used for the current analysis. Multivariate logistic regression models were used to estimate odds ratios and 95% confidence intervals for suicidal thoughts. Combined effects of long working hours and lower socioeconomic status or sleep disturbance were also estimated. Results Compared to groups who worked less than 52 hours per week, odds ratios (95% confidence intervals) for suicidal thoughts in groups who worked 60 hours or more per week were 1.36 (1.09–1.70) for males and 1.38 (1.11–1.72) for females, even after controlling for household income, marital status, history of hypertension or diabetes mellitus, health-related behaviors, and past two weeks’ experience of injury, intoxication, or acute or chronic diseases, as well as type of work. The combined effects of long working hours with lower socioeconomic status, or with sleep disturbance, were also significantly higher compared to participants who worked less than 52 hours per week with higher socioeconomic status, or with 6–8 hours of nighttime sleep. Conclusion In this study, long working hours were linked to suicidal thoughts for both genders. Additionally, the odds of those suicidal thoughts were higher for lower socioeconomic groups. To prevent adverse psychological health problems such as suicidal thoughts, a strategy regarding long working hours should be investigated. PMID:26080022

  5. Student learning of key concepts and skills in inquiry science: A longitudinal study of 4th and 6th grade students

    NASA Astrophysics Data System (ADS)

    Davison, Reeny De Vos

    This study arose out of the need to measure the validity of the hands-on, inquiry-based approach to science learning, as articulated in the National Science Education Standards. It addressed the question of whether the use of hands-on, inquiry-based curriculum promotes improved student understanding of science content and problem-solving and scientific reasoning skills. It measured 4th and 6th grade student learning in five skills (comparing, graphing, investigating, measuring, predicting) and five concepts (objects in the sky, properties, variables, units of measure, life cycle). Data were collected in 1997 and 1999 from two elementary schools in one suburban Pittsburgh school district, where hands-on curriculum units were implemented starting in 1997. A performance-based assessment instrument was devised. Findings were compared by school and by year and showed significant improvement in student learning over the two years. Students improved significantly in the skills of comparing and measuring and in the concepts of objects in the sky, variables, and the life cycle. Additionally, in the repeated measures group, significant improvement was also indicated in the skill of graphing and the concepts of properties and units of measure. No significant differences were found in the skills of investigating and predicting. Student scores in the school with somewhat lower socio-economic status increased more significantly. The study supports the key principles that guided the development of the National Science Education Standards and comprehensive science education programs aligned with them. The results support including the elements of systemic reform, i.e., hands-on curriculum materials, ongoing professional development, centralized materials support, assessment, and community involvement, in all schools.

  6. Device for inspecting vessel surfaces

    DOEpatents

    Appel, D. Keith

    1995-01-01

    A portable, remotely-controlled inspection crawler for use along the walls of tanks, vessels, piping and the like. The crawler can be configured to use a vacuum chamber for supporting itself on the inspected surface by suction or a plurality of magnetic wheels for moving the crawler along the inspected surface. The crawler is adapted to be equipped with an ultrasonic probe for mapping the structural integrity or other characteristics of the surface being inspected. Navigation of the crawler is achieved by triangulation techniques between a signal transmitter on the crawler and a pair of microphones attached to a fixed, remote location, such as the crawler's deployment unit. The necessary communications are established between the crawler and computers external to the inspection environment for position control and storage and/or monitoring of data acquisition.

  7. Ultrasonic inspection and deployment apparatus

    DOEpatents

    Michaels, Jennifer E.; Michaels, Thomas E.; Mech, Jr., Stephen J.

    1984-01-01

    An ultrasonic inspection apparatus for the inspection of metal structures, especially installed pipes. The apparatus combines a specimen inspection element, an acoustical velocity sensing element, and a surface profiling element, all in one scanning head. A scanning head bellows contains a volume of oil above the pipe surface, serving as acoustical couplant between the scanning head and the pipe. The scanning head is mounted on a scanning truck which is mobile around a circular track surrounding the pipe. The scanning truck has sufficient motors, gears, and position encoders to allow the scanning head six degrees of motion freedom. A computer system continually monitors acoustical velocity, and uses that parameter to process surface profiling and inspection data. The profiling data is used to automatically control scanning head position and alignment and to define a coordinate system used to identify and interpret inspection data. The apparatus is suitable for highly automated, remote application in hostile environments, particularly high temperature and radiation areas.

  8. Thermographic inspection of massive structures

    SciTech Connect

    Renshaw, Jeremy B.; Guimaraes, Maria; Scott, David B.

    2014-02-18

    Nondestructive Evaluation of concrete structures is a growing concern for the nuclear industry as well as for many other industries. As critical concrete components continue to age, the ability to assess the health and suitability for continued service has become a key consideration. In some cases, repair of these structures is difficult and expensive, while replacement is prohibitively expensive or, in some cases, not feasible. Therefore, the ability to inspect these key assets is a primary concern, especially in the nuclear industry. Due to the large size of containment buildings, cooling towers, and other large concrete assets, the ability to rapidly inspect for defects of concern is very desirable. Thermographic inspection appears to have the required ability to rapidly inspect large structures to ascertain the location and size of many of the defects of concern. This ability was demonstrated by performing a thermographic inspection of a large concrete dam in 2 days.

  9. Thermographic inspection of massive structures

    NASA Astrophysics Data System (ADS)

    Renshaw, Jeremy B.; Guimaraes, Maria; Scott, David B.

    2014-02-01

    Nondestructive Evaluation of concrete structures is a growing concern for the nuclear industry as well as for many other industries. As critical concrete components continue to age, the ability to assess the health and suitability for continued service has become a key consideration. In some cases, repair of these structures is difficult and expensive, while replacement is prohibitively expensive or, in some cases, not feasible. Therefore, the ability to inspect these key assets is a primary concern, especially in the nuclear industry. Due to the large size of containment buildings, cooling towers, and other large concrete assets, the ability to rapidly inspect for defects of concern is very desirable. Thermographic inspection appears to have the required ability to rapidly inspect large structures to ascertain the location and size of many of the defects of concern. This ability was demonstrated by performing a thermographic inspection of a large concrete dam in 2 days.

  10. Radiographic Inspection of Fueled Clads

    SciTech Connect

    Timothy J. Roney; Karen M. Wendt

    2005-04-01

    Five general purpose heat source (GPHS) fueled clads were radiographically inspected at the Idaho National Laboratory (INL). The girth weld region of each clad had previously passed visual examination, ring gauge test, and leak test but showed “positive” indications on the ultrasonic (UT) test. Positive ultrasonic indications are allowable under certain weld conditions; radiographic inspection provides a secondary nonintrusive means of clad inspection and may confirm allowable anomalies from the UT inspection. All the positive UT indications were found to exhibit allowable weld shield fusion or mismatch conditions. No indication of void defects was found. One additional clad (FCO371) was deemed unacceptable for radiographic inspection due to an unknown black substance that obscured the angular origin on the weld so that the angular offset to the UT indication could not be found.

  11. 12 CFR 725.3 - Regular membership.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... advances without approval of the NCUA Board for a period of six months after becoming a member. This subsection shall not apply to any credit union which becomes a Regular member of the Facility within six... member of the Facility at any time within six months prior to becoming a Regular member of the Facility....

  12. Transport Code for Regular Triangular Geometry

    Energy Science and Technology Software Center (ESTSC)

    1993-06-09

    DIAMANT2 solves the two-dimensional static multigroup neutron transport equation in planar regular triangular geometry. Both regular and adjoint, inhomogeneous and homogeneous problems subject to vacuum, reflective or input specified boundary flux conditions are solved. Anisotropy is allowed for the scattering source. Volume and surface sources are allowed for inhomogeneous problems.

  13. Continuum regularization of quantum field theory

    SciTech Connect

    Bern, Z.

    1986-04-01

    Possible nonperturbative continuum regularization schemes for quantum field theory are discussed which are based upon the Langevin equation of Parisi and Wu. Breit, Gupta and Zaks made the first proposal for new gauge invariant nonperturbative regularization. The scheme is based on smearing in the ''fifth-time'' of the Langevin equation. An analysis of their stochastic regularization scheme for the case of scalar electrodynamics with the standard covariant gauge fixing is given. Their scheme is shown to preserve the masslessness of the photon and the tensor structure of the photon vacuum polarization at the one-loop level. Although stochastic regularization is viable in one-loop electrodynamics, two difficulties arise which, in general, ruins the scheme. One problem is that the superficial quadratic divergences force a bottomless action for the noise. Another difficulty is that stochastic regularization by fifth-time smearing is incompatible with Zwanziger's gauge fixing, which is the only known nonperturbaive covariant gauge fixing for nonabelian gauge theories. Finally, a successful covariant derivative scheme is discussed which avoids the difficulties encountered with the earlier stochastic regularization by fifth-time smearing. For QCD the regularized formulation is manifestly Lorentz invariant, gauge invariant, ghost free and finite to all orders. A vanishing gluon mass is explicitly verified at one loop. The method is designed to respect relevant symmetries, and is expected to provide suitable regularization for any theory of interest. Hopefully, the scheme will lend itself to nonperturbative analysis. 44 refs., 16 figs.

  14. Regular Decompositions for H(div) Spaces

    SciTech Connect

    Kolev, Tzanio; Vassilevski, Panayot

    2012-01-01

    We study regular decompositions for H(div) spaces. In particular, we show that such regular decompositions are closely related to a previously studied “inf-sup” condition for parameter-dependent Stokes problems, for which we provide an alternative, more direct, proof.

  15. How Do 4th, 5th, and 6th Grade Students' Categories of Cognitive Reflections in Interviews on Derivational Morphology Compare to Their Upper Level Spelling Inventory Orthographic Knowledge?

    ERIC Educational Resources Information Center

    Smith, Darcie D.

    2012-01-01

    Eighty-seven 4th, 5th and 6th grade students were administered the "Derivational Relatedness Interview" (DRI) (Templeton, Smith, Moloney, Van Pelt, & Ives, 2009). The purpose of this instrument is to explore students' understanding of derivational morphology. During the same week, the subjects were also administered an Upper…

  16. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  17. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  18. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  19. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  20. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  1. 46 CFR 131.570 - Quarterly inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... inspected once each 3 months. (b) The inspection must involve the removal of drain plugs and the opening of drain valves to ensure that enclosures are free of water. (c) The date of the inspection required...

  2. On regularizations of the Dirac delta distribution

    NASA Astrophysics Data System (ADS)

    Hosseini, Bamdad; Nigam, Nilima; Stockie, John M.

    2016-01-01

    In this article we consider regularizations of the Dirac delta distribution with applications to prototypical elliptic and hyperbolic partial differential equations (PDEs). We study the convergence of a sequence of distributions SH to a singular term S as a parameter H (associated with the support size of SH) shrinks to zero. We characterize this convergence in both the weak-* topology of distributions and a weighted Sobolev norm. These notions motivate a framework for constructing regularizations of the delta distribution that includes a large class of existing methods in the literature. This framework allows different regularizations to be compared. The convergence of solutions of PDEs with these regularized source terms is then studied in various topologies such as pointwise convergence on a deleted neighborhood and weighted Sobolev norms. We also examine the lack of symmetry in tensor product regularizations and effects of dissipative error in hyperbolic problems.

  3. 49 CFR 213.234 - Automated inspection of track constructed with concrete crossties.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... concrete crossties. 213.234 Section 213.234 Transportation Other Regulations Relating to Transportation... § 213.234 Automated inspection of track constructed with concrete crossties. (a) General. Except for... constructed with concrete crossties over which regularly scheduled passenger service trains operate, and...

  4. 49 CFR 213.234 - Automated inspection of track constructed with concrete crossties.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... concrete crossties. 213.234 Section 213.234 Transportation Other Regulations Relating to Transportation... § 213.234 Automated inspection of track constructed with concrete crossties. (a) General. Except for... constructed with concrete crossties over which regularly scheduled passenger service trains operate, and...

  5. 49 CFR 213.234 - Automated inspection of track constructed with concrete crossties.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... concrete crossties. 213.234 Section 213.234 Transportation Other Regulations Relating to Transportation... § 213.234 Automated inspection of track constructed with concrete crossties. (a) General. Except for... constructed with concrete crossties over which regularly scheduled passenger service trains operate, and...

  6. Visual inspection for CTBT verification

    SciTech Connect

    Hawkins, W.; Wohletz, K.

    1997-03-01

    On-site visual inspection will play an essential role in future Comprehensive Test Ban Treaty (CTBT) verification. Although seismic and remote sensing techniques are the best understood and most developed methods for detection of evasive testing of nuclear weapons, visual inspection can greatly augment the certainty and detail of understanding provided by these more traditional methods. Not only can visual inspection offer ``ground truth`` in cases of suspected nuclear testing, but it also can provide accurate source location and testing media properties necessary for detailed analysis of seismic records. For testing in violation of the CTBT, an offending party may attempt to conceal the test, which most likely will be achieved by underground burial. While such concealment may not prevent seismic detection, evidence of test deployment, location, and yield can be disguised. In this light, if a suspicious event is detected by seismic or other remote methods, visual inspection of the event area is necessary to document any evidence that might support a claim of nuclear testing and provide data needed to further interpret seismic records and guide further investigations. However, the methods for visual inspection are not widely known nor appreciated, and experience is presently limited. Visual inspection can be achieved by simple, non-intrusive means, primarily geological in nature, and it is the purpose of this report to describe the considerations, procedures, and equipment required to field such an inspection.

  7. Fully Employing Software Inspections Data

    NASA Technical Reports Server (NTRS)

    Shull, Forrest; Feldmann, Raimund L.; Seaman, Carolyn; Regardie, Myrna; Godfrey, Sally

    2009-01-01

    Software inspections provide a proven approach to quality assurance for software products of all kinds, including requirements, design, code, test plans, among others. Common to all inspections is the aim of finding and fixing defects as early as possible, and thereby providing cost savings by minimizing the amount of rework necessary later in the lifecycle. Measurement data, such as the number and type of found defects and the effort spent by the inspection team, provide not only direct feedback about the software product to the project team but are also valuable for process improvement activities. In this paper, we discuss NASA's use of software inspections and the rich set of data that has resulted. In particular, we present results from analysis of inspection data that illustrate the benefits of fully utilizing that data for process improvement at several levels. Examining such data across multiple inspections or projects allows team members to monitor and trigger cross project improvements. Such improvements may focus on the software development processes of the whole organization as well as improvements to the applied inspection process itself.

  8. Quantitative regularities in floodplain formation

    NASA Astrophysics Data System (ADS)

    Nevidimova, O.

    2009-04-01

    Quantitative regularities in floodplain formation Modern methods of the theory of complex systems allow to build mathematical models of complex systems where self-organizing processes are largely determined by nonlinear effects and feedback. However, there exist some factors that exert significant influence on the dynamics of geomorphosystems, but hardly can be adequately expressed in the language of mathematical models. Conceptual modeling allows us to overcome this difficulty. It is based on the methods of synergetic, which, together with the theory of dynamic systems and classical geomorphology, enable to display the dynamics of geomorphological systems. The most adequate for mathematical modeling of complex systems is the concept of model dynamics based on equilibrium. This concept is based on dynamic equilibrium, the tendency to which is observed in the evolution of all geomorphosystems. As an objective law, it is revealed in the evolution of fluvial relief in general, and in river channel processes in particular, demonstrating the ability of these systems to self-organization. Channel process is expressed in the formation of river reaches, rifts, meanders and floodplain. As floodplain is a periodically flooded surface during high waters, it naturally connects river channel with slopes, being one of boundary expressions of the water stream activity. Floodplain dynamics is inseparable from the channel dynamics. It is formed at simultaneous horizontal and vertical displacement of the river channel, that is at Y=Y(x, y), where х, y - horizontal and vertical coordinates, Y - floodplain height. When dу/dt=0 (for not lowering river channel), the river, being displaced in a horizontal plane, leaves behind a low surface, which flooding during high waters (total duration of flooding) changes from the maximum during the initial moment of time t0 to zero in the moment tn. In a similar manner changed is the total amount of accumulated material on the floodplain surface

  9. Quantitative regularities in floodplain formation

    NASA Astrophysics Data System (ADS)

    Nevidimova, O.

    2009-04-01

    Quantitative regularities in floodplain formation Modern methods of the theory of complex systems allow to build mathematical models of complex systems where self-organizing processes are largely determined by nonlinear effects and feedback. However, there exist some factors that exert significant influence on the dynamics of geomorphosystems, but hardly can be adequately expressed in the language of mathematical models. Conceptual modeling allows us to overcome this difficulty. It is based on the methods of synergetic, which, together with the theory of dynamic systems and classical geomorphology, enable to display the dynamics of geomorphological systems. The most adequate for mathematical modeling of complex systems is the concept of model dynamics based on equilibrium. This concept is based on dynamic equilibrium, the tendency to which is observed in the evolution of all geomorphosystems. As an objective law, it is revealed in the evolution of fluvial relief in general, and in river channel processes in particular, demonstrating the ability of these systems to self-organization. Channel process is expressed in the formation of river reaches, rifts, meanders and floodplain. As floodplain is a periodically flooded surface during high waters, it naturally connects river channel with slopes, being one of boundary expressions of the water stream activity. Floodplain dynamics is inseparable from the channel dynamics. It is formed at simultaneous horizontal and vertical displacement of the river channel, that is at Y=Y(x, y), where х, y - horizontal and vertical coordinates, Y - floodplain height. When dу/dt=0 (for not lowering river channel), the river, being displaced in a horizontal plane, leaves behind a low surface, which flooding during high waters (total duration of flooding) changes from the maximum during the initial moment of time t0 to zero in the moment tn. In a similar manner changed is the total amount of accumulated material on the floodplain surface

  10. Industrial Color Inspection

    NASA Astrophysics Data System (ADS)

    McCamy, C. S.

    1986-10-01

    Color is a very important property of many products and an essential feature of some. The commercial value of color is evident in the fact that customers reject product that is satisfactory in every other way, but is not the right color. Color isrumerically specified, measured, and controlled just as length or weight are. It has three dimensions: Hue, Value, and Chroma, and may be represented in a three-dimensional space. Colors of objects depend on the illumination and pairs of colors may match in one light but not in another. Controlled illumination is required for color matching. Illuminants were standardized by the International Commission on Illumination (CIE). As a basis for color measurement, the CIE adopted three spectral sensitivity functions representing a standard observer. Color may be measured by instruments using standard illumination and simulating the standard observer. It is better to measure spectral reflectance or transmittance and compute colorimetric quantities. Color may be inspected on a production line and the data obtained can be used to control the process. When production cannot be controlled as precisely as required, product may be sorted by color.

  11. F Reactor Inspection

    SciTech Connect

    Grindstaff, Keith; Hathaway, Boyd; Wilson, Mike

    2014-10-29

    Workers from Mission Support Alliance, LLC., removed the welds around the steel door of the F Reactor before stepping inside the reactor to complete its periodic inspection. This is the first time the Department of Energy (DOE) has had the reactor open since 2008. The F Reactor is one of nine reactors along the Columbia River at the Department's Hanford Site in southeastern Washington State, where environmental cleanup has been ongoing since 1989. As part of the Tri-Party Agreement, the Department completes surveillance and maintenance activities of cocooned reactors periodically to evaluate the structural integrity of the safe storage enclosure and to ensure confinement of any remaining hazardous materials. "This entry marks a transition of sorts because the Hanford Long-Term Stewardship Program, for the first time, was responsible for conducting the entry and surveillance and maintenance activities," said Keith Grindstaff, Energy Department Long-Term Stewardship Program Manager. "As the River Corridor cleanup work is completed and transitioned to long-term stewardship, our program will manage any on-going requirements."

  12. F Reactor Inspection

    ScienceCinema

    Grindstaff, Keith; Hathaway, Boyd; Wilson, Mike

    2014-11-24

    Workers from Mission Support Alliance, LLC., removed the welds around the steel door of the F Reactor before stepping inside the reactor to complete its periodic inspection. This is the first time the Department of Energy (DOE) has had the reactor open since 2008. The F Reactor is one of nine reactors along the Columbia River at the Department's Hanford Site in southeastern Washington State, where environmental cleanup has been ongoing since 1989. As part of the Tri-Party Agreement, the Department completes surveillance and maintenance activities of cocooned reactors periodically to evaluate the structural integrity of the safe storage enclosure and to ensure confinement of any remaining hazardous materials. "This entry marks a transition of sorts because the Hanford Long-Term Stewardship Program, for the first time, was responsible for conducting the entry and surveillance and maintenance activities," said Keith Grindstaff, Energy Department Long-Term Stewardship Program Manager. "As the River Corridor cleanup work is completed and transitioned to long-term stewardship, our program will manage any on-going requirements."

  13. Waste inspection tomography (WIT)

    SciTech Connect

    Bernardi, R.T.

    1996-12-31

    WIT is a self-sufficient mobile semitrailer for nondestructive evaluation and nondestructive assay of nuclear waste drums using x-ray and gamma-ray tomography. The recently completed Phase I included the design, fabrication, and initial testing of all WIT subsystems installed on-board the trailer. Initial test results include 2 MeV digital radiography, computed tomography, Anger camera imaging, single photon emission computed tomography, gamma-ray spectroscopy, collimated gamma scanning, and active and passive computed tomography using a 1.4 mCi source of {sup 166}Ho. These techniques were initially demonstrated on a 55-gallon phantom drum with 3 simulated waste matrices of combustibles, heterogeneous metals, and cement using check sources of gamma active isotopes such as {sup 137}Cs and {sup 133}Ba with 9-250 {mu}Ci activities. Waste matrix identification, isotopic identification, and attenuation-corrected gamma activity determination were demonstrated nondestructively and noninvasively in Phase I. Currently ongoing Phase II involves DOE site field test demonstrations at LLNL, RFETS, and INEL with real nuclear waste drums. Current WIT experience includes 55 gallon drums of cement, graphite, sludge, glass, metals, and combustibles. Thus far WIT has inspected drums with 0-20 gms of {sup 239}Pu.

  14. Final inspection of photomask blanks

    NASA Astrophysics Data System (ADS)

    Schubert, Fredi; Sauerbrei, Hartmut; Aschke, Lutz; Knapp, Konrad

    2001-04-01

    In order to increase the quality in manufacturing of future photon mask generations Schott Lithotec is brought in a brand new, much increased automatic laser inspection system into a new manufacturing line of photo mask blanks. It is in a position to detect additionally to the standard defect types further defect types like dim- and bright-chrome defects. The resolution of the system is less than 100 nm. With a quickly inspecting time per blank of less than three minutes and for the first time in the world used automatic SMIF-pod-handling this is a tool for the 100 percent final inspection in the manufacturing of photo mask blanks.

  15. Procedures for precap visual inspection

    NASA Technical Reports Server (NTRS)

    1984-01-01

    Screening procedures for the final precap visual inspection of microcircuits used in electronic system components are described as an aid in training personnel unfamiliar with microcircuits. Processing techniques used in industry for the manufacture of monolithic and hybrid components are presented and imperfections that may be encountered during this inspection are discussed. Problem areas such as scratches, voids, adhesions, and wire bonding are illustrated by photomicrographs. This guide can serve as an effective tool in training personnel to perform precap visual inspections efficiently and reliably.

  16. Functional MRI Using Regularized Parallel Imaging Acquisition

    PubMed Central

    Lin, Fa-Hsuan; Huang, Teng-Yi; Chen, Nan-Kuei; Wang, Fu-Nien; Stufflebeam, Steven M.; Belliveau, John W.; Wald, Lawrence L.; Kwong, Kenneth K.

    2013-01-01

    Parallel MRI techniques reconstruct full-FOV images from undersampled k-space data by using the uncorrelated information from RF array coil elements. One disadvantage of parallel MRI is that the image signal-to-noise ratio (SNR) is degraded because of the reduced data samples and the spatially correlated nature of multiple RF receivers. Regularization has been proposed to mitigate the SNR loss originating due to the latter reason. Since it is necessary to utilize static prior to regularization, the dynamic contrast-to-noise ratio (CNR) in parallel MRI will be affected. In this paper we investigate the CNR of regularized sensitivity encoding (SENSE) acquisitions. We propose to implement regularized parallel MRI acquisitions in functional MRI (fMRI) experiments by incorporating the prior from combined segmented echo-planar imaging (EPI) acquisition into SENSE reconstructions. We investigated the impact of regularization on the CNR by performing parametric simulations at various BOLD contrasts, acceleration rates, and sizes of the active brain areas. As quantified by receiver operating characteristic (ROC) analysis, the simulations suggest that the detection power of SENSE fMRI can be improved by regularized reconstructions, compared to unregularized reconstructions. Human motor and visual fMRI data acquired at different field strengths and array coils also demonstrate that regularized SENSE improves the detection of functionally active brain regions. PMID:16032694

  17. EDITORIAL: Instrumentation and Methods for Neutron Scattering—papers from the 4th European Conference on Neutron Scattering in Lund, Sweden, June 2007

    NASA Astrophysics Data System (ADS)

    Rennie, Adrian R.

    2008-03-01

    Neutron scattering is used as a tool to study problems in disciplines that include chemistry, materials science, biology and condensed matter physics as well as problems from neighbouring disciplines such as geology, environmental sciences and archaeology. Equipment for these studies is found at laboratories with research reactors or spallation neutron sources and there are many recent or current developments with new instruments and even entirely new facilities such as the Spallation Neutron Source at Oak Ridge, USA, the OPAL reactor at Lucas Heights, Australia and the second target station at the ISIS facility in the UK. Design and optimization of the instruments at these facilities involves work with many research laboratories and groups in universities. Every four years the European Conference on Neutron Scattering (ECNS) brings together both the specialists in neutron instrumentation and the community of users (in intervening years there are International and American conferences). In June 2007 about 700 delegates came to the 4th ECNS that was held in Lund, Sweden. There were more than 600 presentations as talks and posters. The opportunity to publish papers in Measurement Science and Technology that relate to neutron scattering instrumentation and method development was offered to the participants, and the papers that follow describe some of the recent activity in this field. Accounts of work on condensed matter science and the applications of neutron scattering appear separately in Journal of Physics: Condensed Matter. There are, of course, many features of neutron instrumentation that are specific to this particular field of measurement. However, there are also many elements of apparatus and experiment design that can usefully be shared with a broader community. It is hoped that this issue with papers from ECNS will find a broad community of interest. Apart from descriptions of overall design of diffractometers and spectrometers there are accounts of new

  18. New Wisdom to Defy an Old Enemy: Summary from a scientific symposium at the 4th Influenza Vaccines for the World (IVW) 2012 Congress, 11 October, Valencia, Spain.

    PubMed

    Poland, Gregory A; Fleming, Douglas M; Treanor, John J; Maraskovsky, Eugene; Luke, Thomas C; Ball, Emma M A; Poland, Caroline M

    2013-04-17

    Both seasonal and pandemic influenza cause considerable morbidity and mortality globally. In addition, the ongoing threat of new, unpredictable influenza pandemics from emerging variant strains cannot be underestimated. Recently bioCSL (previously known as CSL Biotherapies) sponsored a symposium 'New Wisdom to Defy an Old Enemy' at the 4th Influenza Vaccines for the World Congress in Valencia, Spain. This symposium brought together a renowned faculty of experts to discuss lessons from past experience, novel influenza vaccine developments, and new methods to increase vaccine acceptance and coverage. Specific topics reviewed and discussed included new vaccine development efforts focused on improving efficacy via alternative administration routes, dose modifications, improved adjuvants, and the use of master donor viruses. Improved safety was also discussed, particularly the new finding of an excess of febrile reactions isolated to children who received the 2010 Southern Hemisphere (SH) trivalent inactivated influenza vaccine (TIV). Significant work has been done to both identify the cause and minimize the risk of febrile reactions in children. Other novel prophylactic and therapeutic advances were discussed including immunotherapy. Standard IVIg and hIVIg have been used in ferret studies and human case reports with promising results. New adjuvants, such as ISCOMATRIX™ adjuvant, were noted to provide single-dose, prolonged protection with seasonal vaccine after lethal H5N1 virus challenge in a ferret model of human influenza disease. The data suggest that adjuvanted seasonal influenza vaccines may provide broader protection than unadjuvanted vaccines. The use of an antigen-formulated vaccine to induce broad protection between pandemics that could bridge the gap between pandemic declaration and the production of a homologous vaccine was also discussed. Finally, despite the availability of effective vaccines, most current efforts to increase influenza vaccine coverage

  19. Quantitative Estimates of Temporal Mixing across a 4th-order Depositional Sequence: Variation in Time-averaging along the Holocene Marine Succession of the Po Plain, Italy

    NASA Astrophysics Data System (ADS)

    Scarponi, D.; Kaufman, D.; Bright, J.; Kowalewski, M.

    2009-04-01

    Single fossiliferous beds contain biotic remnants that commonly vary in age over a time span of hundreds to thousands of years. Multiple recent studies suggest that such temporal mixing is a widespread phenomenon in marine depositional systems. This research focuses on quantitative estimates of temporal mixing obtained by direct dating of individual corbulid bivalve shells (Lentidium mediterraneum and Corbula gibba) from Po plain marine units of the Holocene 4th-order depositional sequence, including Transgressive Systems Tract [TST] and Highstand Systems Tract [HST]. These units displays a distinctive succession of facies consisting of brackish to marginal marine retrogradational deposits, (early TST), overlain by fully marine fine to coarse gray sands (late TST), and capped with progradational deltaic clays and sands (HST). More than 300 corbulid specimens, representing 19 shell-rich horizons evenly distributed along the depositional sequence and sampled from 9 cores, have been dated by means of aspartic acid racemization calibrated using 23 AMS-radiocarbon dates (14 dates for Lentidium mediterraneum and 9 dates for Corbula gibba, respectively). The results indicate that the scale of time-averaging is comparable when similar depositional environments from the same systems tract are compared across cores. However, time averaging is notably different when similar depositional environments from TST and HST segments of the sequence are compared. Specifically, late HST horizons (n=8) display relatively low levels of time-averaging: the mean within-horizon range of shell ages is 537 years and standard deviation averages 165 years. In contrast, late TST horizons (n=7) are dramatically more time-averaged: mean range of 5104 years and mean standard deviations of 1420 years. Thus, late TST horizons experience a 1 order of magnitude higher time-averaging than environmentally comparable late HST horizons. In conclusion the HST and TST systems tracts of the Po Plain display

  20. Partitioning of regular computation on multiprocessor systems

    NASA Technical Reports Server (NTRS)

    Lee, Fung Fung

    1988-01-01

    Problem partitioning of regular computation over two dimensional meshes on multiprocessor systems is examined. The regular computation model considered involves repetitive evaluation of values at each mesh point with local communication. The computational workload and the communication pattern are the same at each mesh point. The regular computation model arises in numerical solutions of partial differential equations and simulations of cellular automata. Given a communication pattern, a systematic way to generate a family of partitions is presented. The influence of various partitioning schemes on performance is compared on the basis of computation to communication ratio.

  1. Oseledets Regularity Functions for Anosov Flows

    NASA Astrophysics Data System (ADS)

    Simić, Slobodan N.

    2011-07-01

    Oseledets regularity functions quantify the deviation of the growth associated with a dynamical system along its Lyapunov bundles from the corresponding uniform exponential growth. The precise degree of regularity of these functions is unknown. We show that for every invariant Lyapunov bundle of a volume preserving Anosov flow on a closed smooth Riemannian manifold, the corresponding Oseledets regularity functions are in L p ( m), for some p > 0, where m is the probability measure defined by the volume form. We prove an analogous result for essentially bounded cocycles over volume preserving Anosov flows.

  2. Continuum regularization of gauge theory with fermions

    SciTech Connect

    Chan, H.S.

    1987-03-01

    The continuum regularization program is discussed in the case of d-dimensional gauge theory coupled to fermions in an arbitrary representation. Two physically equivalent formulations are given. First, a Grassmann formulation is presented, which is based on the two-noise Langevin equations of Sakita, Ishikawa and Alfaro and Gavela. Second, a non-Grassmann formulation is obtained by regularized integration of the matter fields within the regularized Grassmann system. Explicit perturbation expansions are studied in both formulations, and considerable simplification is found in the integrated non-Grassmann formalism.

  3. Ultrasonic Inspection Of Thick Sections

    NASA Technical Reports Server (NTRS)

    Friant, C. L.; Djordjevic, B. B.; O'Keefe, C. V.; Ferrell, W.; Klutz, T.

    1993-01-01

    Ultrasonics used to inspect large, relatively thick vessels for hidden defects. Report based on experiments in through-the-thickness transmission of ultrasonic waves in both steel and filament-wound composite cases of solid-fuel rocket motors.

  4. Inspecting the reactor vessel penetrations

    SciTech Connect

    Bodson, F.; Fleming, K.W.

    1995-08-01

    The susceptibility of Alloy 600 to Primary Water Stress Corrosion Cracking (PWSCC) continues to plague nuclear power plants. Recently, the problem of PWSCC cracking has manifested itself in Control Rod Drive Mechanism (CRDM) head penetrations in nuclear plants in Europe. Framatome has been extensively involved in the performance of both inspections and repairs of CRDM head penetrations at Electricite de France (EdF) plants. B and W Nuclear Technologies (BWNT), building on Framatome technology, has developed a fully integrated service package and robotic manipulator to inspect and repair CRDM head penetrations for US utilities. Reactor vessel bottom penetration are also made of Alloy 600 and to tackle this potential PWSCC problem at EdF plants, Framatome has been performing specific inspections in order to detect the appearance of the phenomenon. This paper describes the overall range of inspection techniques and toolings developed to address these issues.

  5. Accreditation of veterinary inspection systems.

    PubMed

    Gary, F

    2003-08-01

    Accreditation of Veterinary Services could be a key factor in facilitating international recognition of certificates. For this to occur, accreditation must be conducted within the international normative framework on compliance evaluation. The EN 45004 standard for inspection bodies is the most appropriate organisational reference. It makes a clear distinction between the technical activity of inspection, and decisions which fall within the competence of public authorities. However, there are few international normative texts describing inspection methods, which is a major obstacle to the development of a widely recognised accreditation system. Organisations that accredit inspection bodies exist in many countries, but there are no agreements on multilateral recognition. This paper describes the accreditation cycle and outlines the possibilities for accrediting networks or individual sites. PMID:15884604

  6. Gravity Probe B Inspection

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The space vehicle Gravity Probe B (GP-B) is the relativity experiment developed at Stanford University to test two extraordinary predictions of Albert Einstein's general theory of relativity. The experiment will measure, very precisely, the expected tiny changes in the direction of the spin axes of four gyroscopes contained in an Earth-orbiting satellite at a 400-mile altitude. So free are the gyroscopes from disturbance that they will provide an almost perfect space-time reference system. They will measure how space and time are very slightly warped by the presence of the Earth, and, more profoundly, how the Earth's rotation very slightly drags space-time around with it. These effects, though small for the Earth, have far-reaching implications for the nature of matter and the structure of the Universe. GP-B is among the most thoroughly researched programs ever undertaken by NASA. This is the story of a scientific quest in which physicists and engineers have collaborated closely over many years. Inspired by their quest, they have invented a whole range of technologies that are already enlivening other branches of science and engineering. In this photograph, engineer Gary Reynolds is inspecting the inside of the probe neck during probe thermal repairs. GP-B is scheduled for launch in April 2004 and managed for NASA by the Marshall Space Flight Center. Development of the GP-B is the responsibility of Stanford University along with major subcontractor Lockheed Martin Corporation. (Image credit to Russ Leese, Gravity Probe B, Stanford University)

  7. Surface inspection: Research and development

    NASA Technical Reports Server (NTRS)

    Batchelder, J. S.

    1987-01-01

    Surface inspection techniques are used for process learning, quality verification, and postmortem analysis in manufacturing for a spectrum of disciplines. First, trends in surface analysis are summarized for integrated circuits, high density interconnection boards, and magnetic disks, emphasizing on-line applications as opposed to off-line or development techniques. Then, a closer look is taken at microcontamination detection from both a patterned defect and a particulate inspection point of view.

  8. Underwater welding, cutting and inspection

    SciTech Connect

    Tsai, C.L. . Ohio Underwater Welding Center)

    1995-02-01

    Underwater welding, cutting and inspection of offshore, inland waterway and port facilities are becoming a requirement for both military and industrial communities, as maintenance and repair costs continue to escalate, and as many of the facilities are in operation well beyond their intended design life. In nuclear applications, underwater welding, cutting and inspection for repair and modification of irradiated nuclear power plant components are also a requirement. This article summarizes recent developments in this emerging underwater technology.

  9. The Volume of the Regular Octahedron

    ERIC Educational Resources Information Center

    Trigg, Charles W.

    1974-01-01

    Five methods are given for computing the area of a regular octahedron. It is suggested that students first construct an octahedron as this will aid in space visualization. Six further extensions are left for the reader to try. (LS)

  10. Regular Exercise May Boost Prostate Cancer Survival

    MedlinePlus

    ... nih.gov/medlineplus/news/fullstory_158374.html Regular Exercise May Boost Prostate Cancer Survival Study found that ... HealthDay News) -- Sticking to a moderate or intense exercise regimen may improve a man's odds of surviving ...

  11. Regular Exercise: Antidote for Deadly Diseases?

    MedlinePlus

    ... https://medlineplus.gov/news/fullstory_160326.html Regular Exercise: Antidote for Deadly Diseases? High levels of physical ... Aug. 9, 2016 (HealthDay News) -- Getting lots of exercise may reduce your risk for five common diseases, ...

  12. Scaling behavior of regularized bosonic strings

    NASA Astrophysics Data System (ADS)

    Ambjørn, J.; Makeenko, Y.

    2016-03-01

    We implement a proper-time UV regularization of the Nambu-Goto string, introducing an independent metric tensor and the corresponding Lagrange multiplier, and treating them in the mean-field approximation justified for long strings and/or when the dimension of space-time is large. We compute the regularized determinant of the 2D Laplacian for the closed string winding around a compact dimension, obtaining in this way the effective action, whose minimization determines the energy of the string ground state in the mean-field approximation. We discuss the existence of two scaling limits when the cutoff is taken to infinity. One scaling limit reproduces the results obtained by the hypercubic regularization of the Nambu-Goto string as well as by the use of the dynamical triangulation regularization of the Polyakov string. The other scaling limit reproduces the results obtained by canonical quantization of the Nambu-Goto string.

  13. Nonminimal black holes with regular electric field

    NASA Astrophysics Data System (ADS)

    Balakin, Alexander B.; Zayats, Alexei E.

    2015-05-01

    We discuss the problem of identification of coupling constants, which describe interactions between photons and spacetime curvature, using exact regular solutions to the extended equations of the nonminimal Einstein-Maxwell theory. We argue the idea that three nonminimal coupling constants in this theory can be reduced to the single guiding parameter, which plays the role of nonminimal radius. We base our consideration on two examples of exact solutions obtained earlier in our works: the first of them describes a nonminimal spherically symmetric object (star or black hole) with regular radial electric field; the second example represents a nonminimal Dirac-type object (monopole or black hole) with regular metric. We demonstrate that one of the inflexion points of the regular metric function identifies a specific nonminimal radius, thus marking the domain of dominance of nonminimal interactions.

  14. Parallelization of irregularly coupled regular meshes

    NASA Technical Reports Server (NTRS)

    Chase, Craig; Crowley, Kay; Saltz, Joel; Reeves, Anthony

    1992-01-01

    Regular meshes are frequently used for modeling physical phenomena on both serial and parallel computers. One advantage of regular meshes is that efficient discretization schemes can be implemented in a straight forward manner. However, geometrically-complex objects, such as aircraft, cannot be easily described using a single regular mesh. Multiple interacting regular meshes are frequently used to describe complex geometries. Each mesh models a subregion of the physical domain. The meshes, or subdomains, can be processed in parallel, with periodic updates carried out to move information between the coupled meshes. In many cases, there are a relatively small number (one to a few dozen) subdomains, so that each subdomain may also be partitioned among several processors. We outline a composite run-time/compile-time approach for supporting these problems efficiently on distributed-memory machines. These methods are described in the context of a multiblock fluid dynamics problem developed at LaRC.

  15. Blind Poissonian images deconvolution with framelet regularization.

    PubMed

    Fang, Houzhang; Yan, Luxin; Liu, Hai; Chang, Yi

    2013-02-15

    We propose a maximum a posteriori blind Poissonian images deconvolution approach with framelet regularization for the image and total variation (TV) regularization for the point spread function. Compared with the TV based methods, our algorithm not only suppresses noise effectively but also recovers edges and detailed information. Moreover, the split Bregman method is exploited to solve the resulting minimization problem. Comparative results on both simulated and real images are reported. PMID:23455078

  16. Regularized CT reconstruction on unstructured grid

    NASA Astrophysics Data System (ADS)

    Chen, Yun; Lu, Yao; Ma, Xiangyuan; Xu, Yuesheng

    2016-04-01

    Computed tomography (CT) is an ill-posed problem. Reconstruction on unstructured grid reduces the computational cost and alleviates the ill-posedness by decreasing the dimension of the solution space. However, there was no systematic study on edge-preserving regularization methods for CT reconstruction on unstructured grid. In this work, we propose a novel regularization method for CT reconstruction on unstructured grid, such as triangular or tetrahedral meshes generated from the initial images reconstructed via analysis reconstruction method (e.g., filtered back-projection). The proposed regularization method is modeled as a three-term optimization problem, containing a weighted least square fidelity term motivated by the simultaneous algebraic reconstruction technique (SART). The related cost function contains two non-differentiable terms, which bring difficulty to the development of the fast solver. A fixed-point proximity algorithm with SART is developed for solving the related optimization problem, and accelerating the convergence. Finally, we compare the regularized CT reconstruction method to SART with different regularization methods. Numerical experiments demonstrated that the proposed regularization method on unstructured grid is effective to suppress noise and preserve edge features.

  17. Continuum regularization of quantum field theory

    SciTech Connect

    Bern, Z.

    1986-01-01

    Breit, Gupta, and Zaks made the first proposal for new gauge invariant nonperturbative regularization. The scheme is based on smearing in the fifth-time of the Langevin equation. An analysis of their stochastic regularization scheme for the case of scalar electrodynamics with the standard covariant gauge fixing is given. Their scheme is shown to preserve the masslessness of the photon and the tensor structure of the photon vacuum polarization at the one-loop level. Although stochastic regularization is viable in one-loop electrodynamics, difficulties arise which, in general, ruins the scheme. A successful covariant derivative scheme is discussed which avoids the difficulties encountered with the earlier stochastic regularization by fifth-time smearing. For QCD the regularized formulation is manifestly Lorentz invariant, gauge invariant, ghost free and finite to all orders. A vanishing gluon mass is explicitly verified at one loop. The method is designed to respect relevant symmetries, and is expected to provide suitable regularization for any theory of interest.

  18. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age,...

  19. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age,...

  20. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age,...

  1. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age,...

  2. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age,...

  3. 7 CFR 353.6 - Inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 5 2012-01-01 2012-01-01 false Inspection. 353.6 Section 353.6 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORT CERTIFICATION § 353.6 Inspection. Inspections shall be performed by agents, by inspectors, or by employees of a State...

  4. 24 CFR 983.103 - Inspecting units.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... are specified in 24 CFR 982.404(b).) (3) In conducting PHA supervisory quality control HQS inspections... sample of inspected contract units in a building fail the initial inspection, the PHA must reinspect 100... inspection—(1) Inspection of site. The PHA must examine the proposed site before the proposal selection...

  5. 24 CFR 983.103 - Inspecting units.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... are specified in 24 CFR 982.404(b).) (3) In conducting PHA supervisory quality control HQS inspections... sample of inspected contract units in a building fail the initial inspection, the PHA must reinspect 100... inspection—(1) Inspection of site. The PHA must examine the proposed site before the proposal selection...

  6. 24 CFR 983.103 - Inspecting units.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... are specified in 24 CFR 982.404(b).) (3) In conducting PHA supervisory quality control HQS inspections... sample of inspected contract units in a building fail the initial inspection, the PHA must reinspect 100... inspection—(1) Inspection of site. The PHA must examine the proposed site before the proposal selection...

  7. 24 CFR 983.103 - Inspecting units.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... are specified in 24 CFR 982.404(b).) (3) In conducting PHA supervisory quality control HQS inspections... sample of inspected contract units in a building fail the initial inspection, the PHA must reinspect 100... inspection—(1) Inspection of site. The PHA must examine the proposed site before the proposal selection...

  8. 15 CFR 717.2 - Challenge inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... host and escort the international Inspection Team for challenge inspections in the United States of... hours, unless extended by agreement between the Inspection Team and the Host Team Leader. (d) Scope and... inspections. Consistent with the provisions of the Convention, the Host Team will ensure, to the...

  9. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  10. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  11. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  12. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  13. 46 CFR 115.818 - Sanitary inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Sanitary inspection. 115.818 Section 115.818 Shipping... Inspections § 115.818 Sanitary inspection. At each inspection for certification and at every other vessel... be examined to determine that they are serviceable and in a sanitary condition....

  14. 46 CFR 115.818 - Sanitary inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Sanitary inspection. 115.818 Section 115.818 Shipping... Inspections § 115.818 Sanitary inspection. At each inspection for certification and at every other vessel... be examined to determine that they are serviceable and in a sanitary condition....

  15. Proceedings: EPRI Second Phased Array Inspection Seminar

    SciTech Connect

    2001-11-01

    The Second EPRI Phased Array Inspection Seminar focused on industrial applications of phased array technology that have been achieved to date or are planned for the near future. Presentations were made by developers of inspection techniques, inspection services vendors, and utility personnel who have performed inspections using arrays.

  16. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  17. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  18. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  19. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  20. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  1. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  2. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  3. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  4. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  5. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  6. 7 CFR 989.105 - Inspection point.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Inspection point. 989.105 Section 989.105 Agriculture... CALIFORNIA Administrative Rules and Regulations Definitions § 989.105 Inspection point. Inspection point... handler, and which is so designated by the Committee. The inspection point(s) of the handler shall...

  7. 7 CFR 989.105 - Inspection point.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Inspection point. 989.105 Section 989.105 Agriculture... CALIFORNIA Administrative Rules and Regulations Definitions § 989.105 Inspection point. Inspection point... handler, and which is so designated by the Committee. The inspection point(s) of the handler shall...

  8. 75 FR 81965 - Grain Inspection Advisory Committee Reestablishment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-29

    ...; ] DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration Grain Inspection Advisory Committee Reestablishment AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA. ACTION... reestablished the Grain Inspection, Packers and Stockyards Administration (GIPSA) Grain Inspection...

  9. 77 FR 76452 - Grain Inspection Advisory Committee Reestablishment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-28

    ... Grain Inspection, Packers and Stockyards Administration Grain Inspection Advisory Committee Reestablishment AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA. ACTION: Notice to... Grain Inspection, Packers and Stockyards Administration (GIPSA) Grain Inspection Advisory...

  10. A study of defects on EUV mask using blank inspection, patterned mask inspection, and wafer inspection

    SciTech Connect

    Huh, S.; Ren, L.; Chan, D.; Wurm, S.; Goldberg, K. A.; Mochi, I.; Nakajima, T.; Kishimoto, M.; Ahn, B.; Kang, I.; Park, J.-O.; Cho, K.; Han, S.-I.; Laursen, T.

    2010-03-12

    The availability of defect-free masks remains one of the key challenges for inserting extreme ultraviolet lithography (EUVL) into high volume manufacturing. yet link data is available for understanding native defects on real masks. In this paper, a full-field EUV mask is fabricated to investigate the printability of various defects on the mask. The printability of defects and identification of their source from mask fabrication to handling were studied using wafer inspection. The printable blank defect density excluding particles and patterns is 0.63 cm{sup 2}. Mask inspection is shown to have better sensitivity than wafer inspection. The sensitivity of wafer inspection must be improved using through-focus analysis and a different wafer stack.

  11. Usual Source of Care in Preventive Service Use: A Regular Doctor versus a Regular Site

    PubMed Central

    Xu, K Tom

    2002-01-01

    Objective To compare the effects of having a regular doctor and having a regular site on five preventive services, controlling for the endogeneity of having a usual source of care. Data Source The Medical Expenditure Panel Survey 1996 conducted by the Agency for Healthcare Research and Quality and the National Center for Health Statistics. Study Design Mammograms, pap smears, blood pressure checkups, cholesterol level checkups, and flu shots were examined. A modified behavioral model framework was presented, which controlled for the endogeneity of having a usual source of care. Based on this framework, a two-equation empirical model was established to predict the probabilities of having a regular doctor and having a regular site, and use of each type of preventive service. Principal Findings Having a regular doctor was found to have a greater impact than having a regular site on discretional preventive services, such as blood pressure and cholesterol level checkups. No statistically significant differences were found between the effects a having a regular doctor and having a regular site on the use of flu shots, pap smears, and mammograms. Among the five preventive services, having a usual source of care had the greatest impact on cholesterol level checkups and pap smears. Conclusions Promoting a stable physician–patient relationship can improve patients’ timely receipt of clinical prevention. For certain preventive services, having a regular doctor is more effective than having a regular site. PMID:12546284

  12. ROBOTIC TANK INSPECTION END EFFECTOR

    SciTech Connect

    Rachel Landry

    1999-10-01

    The objective of this contract between Oceaneering Space Systems (OSS) and the Department of Energy (DOE) was to provide a tool for the DOE to inspect the inside tank walls of underground radioactive waste storage tanks in their tank farms. Some of these tanks are suspected to have leaks, but the harsh nature of the environment within the tanks precludes human inspection of tank walls. As a result of these conditions only a few inspection methods can fulfill this task. Of the methods available, OSS chose to pursue Alternating Current Field Measurement (ACFM), because it does not require clean surfaces for inspection, nor any contact with the Surface being inspected, and introduces no extra by-products in the inspection process (no coupling fluids or residues are left behind). The tool produced by OSS is the Robotic Tank Inspection End Effector (RTIEE), which is initially deployed on the tip of the Light Duty Utility Arm (LDUA). The RTEE combines ACFM with a color video camera for both electromagnetic and visual inspection The complete package consists of an end effector, its corresponding electronics and software, and a user's manual to guide the operator through an inspection. The system has both coarse and fine inspection modes and allows the user to catalog defects and suspected areas of leakage in a database for further examination, which may lead to emptying the tank for repair, decommissioning, etc.. The following is an updated report to OSS document OSS-21100-7002, which was submitted in 1995. During the course of the contract, two related subtasks arose, the Wall and Coating Thickness Sensor and the Vacuum Scarifying and Sampling Tool Assembly. The first of these subtasks was intended to evaluate the corrosion and wall thinning of 55-gallon steel drums. The second was retrieved and characterized the waste material trapped inside the annulus region of the underground tanks on the DOE's tank farms. While these subtasks were derived from the original intent of

  13. In Situ Robotic Inspection Of Welds

    NASA Technical Reports Server (NTRS)

    Van Wyk, Lisa M.; Garcia, Raul C., Jr.; Gilbert, Jeffrey L.

    1992-01-01

    Automated system reduces delays in inspection and rework. System reduces inspection-and-rework delay from days to hours. Path of inspection sensors taken directly from welding path saving time in programming for inspection. Inspection data stored so not lost as inspection equipment turned off. Same robot welding workpiece used to inspect it. In preparation, welding tool mounted on end effector of robot replaced with eddy-current or ultrasonic sensor. Robot recalls welding path from memory and retraces it, recording sensor output as it proceeds.

  14. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  15. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  16. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  17. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  18. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  19. Development of Inspection Robots for Bridge Cables

    PubMed Central

    Kim, Se-Hoon; Lee, Jong-Jae

    2013-01-01

    This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented. PMID:24459453

  20. Improvements in GRACE Gravity Fields Using Regularization

    NASA Astrophysics Data System (ADS)

    Save, H.; Bettadpur, S.; Tapley, B. D.

    2008-12-01

    The unconstrained global gravity field models derived from GRACE are susceptible to systematic errors that show up as broad "stripes" aligned in a North-South direction on the global maps of mass flux. These errors are believed to be a consequence of both systematic and random errors in the data that are amplified by the nature of the gravity field inverse problem. These errors impede scientific exploitation of the GRACE data products, and limit the realizable spatial resolution of the GRACE global gravity fields in certain regions. We use regularization techniques to reduce these "stripe" errors in the gravity field products. The regularization criteria are designed such that there is no attenuation of the signal and that the solutions fit the observations as well as an unconstrained solution. We have used a computationally inexpensive method, normally referred to as "L-ribbon", to find the regularization parameter. This paper discusses the characteristics and statistics of a 5-year time-series of regularized gravity field solutions. The solutions show markedly reduced stripes, are of uniformly good quality over time, and leave little or no systematic observation residuals, which is a frequent consequence of signal suppression from regularization. Up to degree 14, the signal in regularized solution shows correlation greater than 0.8 with the un-regularized CSR Release-04 solutions. Signals from large-amplitude and small-spatial extent events - such as the Great Sumatra Andaman Earthquake of 2004 - are visible in the global solutions without using special post-facto error reduction techniques employed previously in the literature. Hydrological signals as small as 5 cm water-layer equivalent in the small river basins, like Indus and Nile for example, are clearly evident, in contrast to noisy estimates from RL04. The residual variability over the oceans relative to a seasonal fit is small except at higher latitudes, and is evident without the need for de-striping or

  1. Examination of the association between announced inspections and inspection scores.

    PubMed

    Waters, A Blake; VanDerslice, James; Porucznik, Christina A; Kim, Jaewhan; DeLegge, Royal; Durrant, Lynne

    2013-09-01

    In 2010 the Salt Lake Valley Health Department conducted a pilot of an announced inspection program utilizing a randomized assignment of restaurants to an intervention group with announced inspections and a control group that remained on the usual schedule of unannounced inspections. After adjusting for food type, visible kitchen, outside quality assurance, season, and standardized inspector, significant reductions were found in the odds ratios of personal hygiene (adjusted odds ratios [aOR] = 0.11, p = .00) and equipment cleanliness (aOR = 0.19, p = .00) violations. In the models for the control group, none of the odds ratios were statistically different from one, indicating no change in the postintervention time period as compared to the preintervention period. PMID:24073484

  2. A new approach for defect inspection on large area masks

    NASA Astrophysics Data System (ADS)

    Scheuring, Gerd; Döbereiner, Stefan; Hillmann, Frank; Falk, Günther; Brück, Hans-Jürgen

    2007-02-01

    Besides the mask market for IC manufacturing, which mainly uses 6 inch sized masks, the market for the so called large area masks is growing very rapidly. Typical applications of these masks are mainly wafer bumping for current packaging processes, color filters on TFTs, and Flip Chip manufacturing. To expose e.g. bumps and similar features on 200 mm wafers under proximity exposure conditions 9 inch masks are used, while in 300 mm wafer bumping processes (Fig. 1) 14 inch masks are handled. Flip Chip manufacturing needs masks up to 28 by 32 inch. This current maximum mask dimension is expected to hold for the next 5 years in industrial production. On the other hand shrinking feature sizes, just as in case of the IC masks, demand enhanced sensitivity of the inspection tools. A defect inspection tool for those masks is valuable for both the mask maker, who has to deliver a defect free mask to his customer, and for the mask user to supervise the mask behavior conditions during its lifetime. This is necessary because large area masks are mainly used for proximity exposures. During this process itself the mask is vulnerable by contacting the resist on top of the wafers. Therefore a regular inspection of the mask after 25, 50, or 100 exposures has to be done during its whole lifetime. Thus critical resist contamination and other defects, which lead to yield losses, can be recognized early. In the future shrinking feature dimensions will require even more sensitive and reliable defect inspection methods than they do presently. Besides the sole inspection capability the tools should also provide highly precise measurement capabilities and extended review options.

  3. Oxygen saturation resolution influences regularity measurements.

    PubMed

    Garde, Ainara; Karlen, Walter; Dehkordi, Parastoo; Ansermino, J Mark; Dumont, Guy A

    2014-01-01

    The measurement of regularity in the oxygen saturation (SpO(2)) signal has been suggested for use in identifying subjects with sleep disordered breathing (SDB). Previous work has shown that children with SDB have lower SpO(2) regularity than subjects without SDB (NonSDB). Regularity was measured using non-linear methods like approximate entropy (ApEn), sample entropy (SamEn) and Lempel-Ziv (LZ) complexity. Different manufacturer's pulse oximeters provide SpO(2) at various resolutions and the effect of this resolution difference on SpO(2) regularity, has not been studied. To investigate this effect, we used the SpO(2) signal of children with and without SDB, recorded from the Phone Oximeter (0.1% resolution) and the same SpO(2) signal rounded to the nearest integer (artificial 1% resolution). To further validate the effect of rounding, we also used the SpO(2) signal (1% resolution) recorded simultaneously from polysomnography (PSG), as a control signal. We estimated SpO(2) regularity by computing the ApEn, SamEn and LZ complexity, using a 5-min sliding window and showed that different resolutions provided significantly different results. The regularity calculated using 0.1% SpO(2) resolution provided no significant differences between SDB and NonSDB. However, the artificial 1% resolution SpO(2) provided significant differences between SDB and NonSDB, showing a more random SpO(2) pattern (lower SpO(2) regularity) in SDB children, as suggested in the past. Similar results were obtained with the SpO(2) recorded from PSG (1% resolution), which further validated that this SpO(2) regularity change was due to the rounding effect. Therefore, the SpO(2) resolution has a great influence in regularity measurements like ApEn, SamEn and LZ complexity that should be considered when studying the SpO(2) pattern in children with SDB. PMID:25570437

  4. Modified sparse regularization for electrical impedance tomography.

    PubMed

    Fan, Wenru; Wang, Huaxiang; Xue, Qian; Cui, Ziqiang; Sun, Benyuan; Wang, Qi

    2016-03-01

    Electrical impedance tomography (EIT) aims to estimate the electrical properties at the interior of an object from current-voltage measurements on its boundary. It has been widely investigated due to its advantages of low cost, non-radiation, non-invasiveness, and high speed. Image reconstruction of EIT is a nonlinear and ill-posed inverse problem. Therefore, regularization techniques like Tikhonov regularization are used to solve the inverse problem. A sparse regularization based on L1 norm exhibits superiority in preserving boundary information at sharp changes or discontinuous areas in the image. However, the limitation of sparse regularization lies in the time consumption for solving the problem. In order to further improve the calculation speed of sparse regularization, a modified method based on separable approximation algorithm is proposed by using adaptive step-size and preconditioning technique. Both simulation and experimental results show the effectiveness of the proposed method in improving the image quality and real-time performance in the presence of different noise intensities and conductivity contrasts. PMID:27036798

  5. Assessment of regularization techniques for electrocardiographic imaging

    PubMed Central

    Milanič, Matija; Jazbinšek, Vojko; MacLeod, Robert S.; Brooks, Dana H.; Hren, Rok

    2014-01-01

    A widely used approach to solving the inverse problem in electrocardiography involves computing potentials on the epicardium from measured electrocardiograms (ECGs) on the torso surface. The main challenge of solving this electrocardiographic imaging (ECGI) problem lies in its intrinsic ill-posedness. While many regularization techniques have been developed to control wild oscillations of the solution, the choice of proper regularization methods for obtaining clinically acceptable solutions is still a subject of ongoing research. However there has been little rigorous comparison across methods proposed by different groups. This study systematically compared various regularization techniques for solving the ECGI problem under a unified simulation framework, consisting of both 1) progressively more complex idealized source models (from single dipole to triplet of dipoles), and 2) an electrolytic human torso tank containing a live canine heart, with the cardiac source being modeled by potentials measured on a cylindrical cage placed around the heart. We tested 13 different regularization techniques to solve the inverse problem of recovering epicardial potentials, and found that non-quadratic methods (total variation algorithms) and first-order and second-order Tikhonov regularizations outperformed other methodologies and resulted in similar average reconstruction errors. PMID:24369741

  6. Serpentine Robots for Inspection Tasks

    SciTech Connect

    Choset, Howie

    2003-09-11

    Serpentine robots are snake like devices that can use their internal degrees of freedom to thread through tightly packed volumes accessing locations that people or conventional machinery cannot. These devices are ideally suited for minimally invasive inspection tasks where the surrounding areas do not have to be disturbed. Applications for these devices are therefore inspection of underground tanks and other storage facilities for classification purposes. This work deals with the design, construction, and control of a serpentine robot. The challenges lie in developing a device that can lift itself in three dimensions, which is necessary for the inspection tasks. The other challenge in control deals with coordinating all of the internal degrees of freedom to exact purposeful motion.

  7. Perturbations in a regular bouncing universe

    SciTech Connect

    Battefeld, T.J.; Geshnizjani, G.

    2006-03-15

    We consider a simple toy model of a regular bouncing universe. The bounce is caused by an extra timelike dimension, which leads to a sign flip of the {rho}{sup 2} term in the effective four dimensional Randall Sundrum-like description. We find a wide class of possible bounces: big bang avoiding ones for regular matter content, and big rip avoiding ones for phantom matter. Focusing on radiation as the matter content, we discuss the evolution of scalar, vector and tensor perturbations. We compute a spectral index of n{sub s}=-1 for scalar perturbations and a deep blue index for tensor perturbations after invoking vacuum initial conditions, ruling out such a model as a realistic one. We also find that the spectrum (evaluated at Hubble crossing) is sensitive to the bounce. We conclude that it is challenging, but not impossible, for cyclic/ekpyrotic models to succeed, if one can find a regularized version.

  8. Shadow of rotating regular black holes

    NASA Astrophysics Data System (ADS)

    Abdujabbarov, Ahmadjon; Amir, Muhammed; Ahmedov, Bobomurat; Ghosh, Sushant G.

    2016-05-01

    We study the shadows cast by the different types of rotating regular black holes viz. Ayón-Beato-García (ABG), Hayward, and Bardeen. These black holes have in addition to the total mass (M ) and rotation parameter (a ), different parameters as electric charge (Q ), deviation parameter (g ), and magnetic charge (g*). Interestingly, the size of the shadow is affected by these parameters in addition to the rotation parameter. We found that the radius of the shadow in each case decreases monotonically, and the distortion parameter increases when the values of these parameters increase. A comparison with the standard Kerr case is also investigated. We have also studied the influence of the plasma environment around regular black holes to discuss its shadow. The presence of the plasma affects the apparent size of the regular black hole's shadow to be increased due to two effects: (i) gravitational redshift of the photons and (ii) radial dependence of plasma density.

  9. Strong regularizing effect of integrable systems

    SciTech Connect

    Zhou, Xin

    1997-11-01

    Many time evolution problems have the so-called strong regularization effect, that is, with any irregular initial data, as soon as becomes greater than 0, the solution becomes C{sup {infinity}} for both spacial and temporal variables. This paper studies 1 x 1 dimension integrable systems for such regularizing effect. In the work by Sachs, Kappler [S][K], (see also earlier works [KFJ] and [Ka]), strong regularizing effect is proved for KdV with rapidly decaying irregular initial data, using the inverse scattering method. There are two equivalent Gel`fand-Levitan-Marchenko (GLM) equations associated to an inverse scattering problem, one is normalized at x = {infinity} and another at x = {infinity}. The method of [S][K] relies on the fact that the KdV waves propagate only in one direction and therefore one of the two GLM equations remains normalized and can be differentiated infinitely many times. 15 refs.

  10. Regularized image recovery in scattering media.

    PubMed

    Schechner, Yoav Y; Averbuch, Yuval

    2007-09-01

    When imaging in scattering media, visibility degrades as objects become more distant. Visibility can be significantly restored by computer vision methods that account for physical processes occurring during image formation. Nevertheless, such recovery is prone to noise amplification in pixels corresponding to distant objects, where the medium transmittance is low. We present an adaptive filtering approach that counters the above problems: while significantly improving visibility relative to raw images, it inhibits noise amplification. Essentially, the recovery formulation is regularized, where the regularization adapts to the spatially varying medium transmittance. Thus, this regularization does not blur close objects. We demonstrate the approach in atmospheric and underwater experiments, based on an automatic method for determining the medium transmittance. PMID:17627052

  11. An explorative approach for inspecting Kepler data

    NASA Astrophysics Data System (ADS)

    Kügler, S. D.; Gianniotis, N.; Polsterer, K. L.

    2016-02-01

    The Kepler survey has provided a wealth of astrophysical knowledge by continuously monitoring over 150 000 stars. The resulting data base contains thousands of examples of known variability types and at least as many that cannot be classified yet. In order to reveal the knowledge hidden in the data base, we introduce a new visualization method that allows us to inspect regularly sampled time series in an explorative fashion. To that end, we propose dimensionality reduction on the parameters of a model capable of representing time series as fixed-length vector representation. We show that a more refined objective function can be chosen by minimizing the reconstruction error, that is the deviation between prediction and observation, of the observed time series instead of reconstructing model parameters. The proposed visualization exhibits a strong correlation between the variability behaviour of the light curves and their physical properties. As a consequence, temperature and surface gravity can, for some stars, be directly inferred from non- (or quasi-) periodic light curves.

  12. Evaluation of inservice inspection examinatiions

    SciTech Connect

    Aldrich, D.A.; Cook, J.F.

    1990-05-01

    In order to evaluate the effectiveness of Section 11, Division 1, ``Rules for Inservice Inspection of Nuclear Power Plant Components,`` of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code examinations, 26 inservice inspection (ISI) summary reports from 24 facilities were reviewed. It was found that these ASME Code examinations and tests are instrumental in revealing indications and defects in welds and plant components. In addition, this study uncovered that fact that some of the Section 11 requirements are apparently not clear and are misunderstood by some of the facilities. Also, the need for more stringent requirements was evaluated and some Code changes are recommended.

  13. Evaluation of inservice inspection examinatiions

    SciTech Connect

    Aldrich, D.A.; Cook, J.F.

    1990-05-01

    In order to evaluate the effectiveness of Section 11, Division 1, Rules for Inservice Inspection of Nuclear Power Plant Components,'' of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code examinations, 26 inservice inspection (ISI) summary reports from 24 facilities were reviewed. It was found that these ASME Code examinations and tests are instrumental in revealing indications and defects in welds and plant components. In addition, this study uncovered that fact that some of the Section 11 requirements are apparently not clear and are misunderstood by some of the facilities. Also, the need for more stringent requirements was evaluated and some Code changes are recommended.

  14. Guided acoustic wave inspection system

    DOEpatents

    Chinn, Diane J.

    2004-10-05

    A system for inspecting a conduit for undesirable characteristics. A transducer system induces guided acoustic waves onto said conduit. The transducer system detects the undesirable characteristics of the conduit by receiving guided acoustic waves that contain information about the undesirable characteristics. The conduit has at least two sides and the transducer system utilizes flexural modes of propagation to provide inspection using access from only the one side of the conduit. Cracking is detected with pulse-echo testing using one transducer to both send and receive the guided acoustic waves. Thinning is detected in through-transmission testing where one transducer sends and another transducer receives the guided acoustic waves.

  15. [Why regular physical activity favors longevity].

    PubMed

    Pentimone, F; Del Corso, L

    1998-06-01

    Regular physical exercise is useful at all ages. In the elderly, even a gentle exercise programme consisting of walking, bicycling, playing golf if performed constantly increases longevity by preventing the onset of the main diseases or alleviating the handicaps they may have caused. Cardiovascular diseases, which represent the main cause of death in the elderly, and osteoporosis, a disabling disease potentially capable of shortening life expectancy, benefit from physical exercise which if performed regularly well before the start of old age may help to prevent them. Over the past few years there has been growing evidence of the concrete protection offered against neoplasia and even the ageing process itself. PMID:9739351

  16. Learning with regularizers in multilayer neural networks

    NASA Astrophysics Data System (ADS)

    Saad, David; Rattray, Magnus

    1998-02-01

    We study the effect of regularization in an on-line gradient-descent learning scenario for a general two-layer student network with an arbitrary number of hidden units. Training examples are randomly drawn input vectors labeled by a two-layer teacher network with an arbitrary number of hidden units that may be corrupted by Gaussian output noise. We examine the effect of weight decay regularization on the dynamical evolution of the order parameters and generalization error in various phases of the learning process, in both noiseless and noisy scenarios.

  17. Regular transport dynamics produce chaotic travel times.

    PubMed

    Villalobos, Jorge; Muñoz, Víctor; Rogan, José; Zarama, Roberto; Johnson, Neil F; Toledo, Benjamín; Valdivia, Juan Alejandro

    2014-06-01

    In the hope of making passenger travel times shorter and more reliable, many cities are introducing dedicated bus lanes (e.g., Bogota, London, Miami). Here we show that chaotic travel times are actually a natural consequence of individual bus function, and hence of public transport systems more generally, i.e., chaotic dynamics emerge even when the route is empty and straight, stops and lights are equidistant and regular, and loading times are negligible. More generally, our findings provide a novel example of chaotic dynamics emerging from a single object following Newton's laws of motion in a regularized one-dimensional system. PMID:25019866

  18. Demosaicing as the problem of regularization

    NASA Astrophysics Data System (ADS)

    Kunina, Irina; Volkov, Aleksey; Gladilin, Sergey; Nikolaev, Dmitry

    2015-12-01

    Demosaicing is the process of reconstruction of a full-color image from Bayer mosaic, which is used in digital cameras for image formation. This problem is usually considered as an interpolation problem. In this paper, we propose to consider the demosaicing problem as a problem of solving an underdetermined system of algebraic equations using regularization methods. We consider regularization with standard l1/2-, l1 -, l2- norms and their effect on quality image reconstruction. The experimental results showed that the proposed technique can both be used in existing methods and become the base for new ones

  19. REGULAR VERSUS DIFFUSIVE PHOTOSPHERIC FLUX CANCELLATION

    SciTech Connect

    Litvinenko, Yuri E.

    2011-04-20

    Observations of photospheric flux cancellation on the Sun imply that cancellation can be a diffusive rather than regular process. A criterion is derived, which quantifies the parameter range in which diffusive photospheric cancellation should occur. Numerical estimates show that regular cancellation models should be expected to give a quantitatively accurate description of photospheric cancellation. The estimates rely on a recently suggested scaling for a turbulent magnetic diffusivity, which is consistent with the diffusivity measurements on spatial scales varying by almost two orders of magnitude. Application of the turbulent diffusivity to large-scale dispersal of the photospheric magnetic flux is discussed.

  20. Wavelet-based regularization for robust microwave imaging in medical applications.

    PubMed

    Scapaticci, Rosa; Kosmas, Panagiotis; Crocco, Lorenzo

    2015-04-01

    Microwave imaging (MWI) is an emerging tool for medical diagnostics, potentially offering unique advantages such as the capability of providing quantitative images of the inspected tissues. This involves, however, solving a challenging nonlinear and ill-posed electromagnetic inverse scattering problem. This paper presents a robust method for quantitative MWI in medical applications where very little, if any, a priori information on the imaging scenario is available. This is accomplished by employing a distorted Born iterative method and a regularization by projection technique, which reconstructs the tissue parameters using a wavelet basis expansion to represent the unknown contrast. This approach is suited for any microwave medical imaging application where the requirement for increased resolution dictates the use of higher frequency data and, consequently, a robust regularization strategy. To demonstrate the robustness of the proposed approach, this paper presents reconstructions of highly heterogeneous anatomically realistic numerical breast phantoms in a canonical 2-D configuration. PMID:25532165

  1. 12 CFR 725.3 - Regular membership.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.3 Regular membership. (a) A natural person credit... the credit union's paid-in and unimpaired capital and surplus, as determined in accordance with §...

  2. 12 CFR 725.3 - Regular membership.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.3 Regular membership. (a) A natural person credit... the credit union's paid-in and unimpaired capital and surplus, as determined in accordance with §...

  3. 12 CFR 725.3 - Regular membership.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.3 Regular membership. (a) A natural person credit... the credit union's paid-in and unimpaired capital and surplus, as determined in accordance with §...

  4. 12 CFR 725.3 - Regular membership.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.3 Regular membership. (a) A natural person credit... the credit union's paid-in and unimpaired capital and surplus, as determined in accordance with §...

  5. Commitment and Dependence Upon Regular Running.

    ERIC Educational Resources Information Center

    Sachs, Michael L.; Pargman, David

    The linear relationship between intellectual commitment to running and psychobiological dependence upon running is examined. A sample of 540 regular runners (running frequency greater than three days per week for the past year for the majority) was surveyed with a questionnaire. Measures of commitment and dependence on running, as well as…

  6. RBOOST: RIEMANNIAN DISTANCE BASED REGULARIZED BOOSTING.

    PubMed

    Liu, Meizhu; Vemuri, Baba C

    2011-03-30

    Boosting is a versatile machine learning technique that has numerous applications including but not limited to image processing, computer vision, data mining etc. It is based on the premise that the classification performance of a set of weak learners can be boosted by some weighted combination of them. There have been a number of boosting methods proposed in the literature, such as the AdaBoost, LPBoost, SoftBoost and their variations. However, the learning update strategies used in these methods usually lead to overfitting and instabilities in the classification accuracy. Improved boosting methods via regularization can overcome such difficulties. In this paper, we propose a Riemannian distance regularized LPBoost, dubbed RBoost. RBoost uses Riemannian distance between two square-root densities (in closed form) - used to represent the distribution over the training data and the classification error respectively - to regularize the error distribution in an iterative update formula. Since this distance is in closed form, RBoost requires much less computational cost compared to other regularized Boosting algorithms. We present several experimental results depicting the performance of our algorithm in comparison to recently published methods, LP-Boost and CAVIAR, on a variety of datasets including the publicly available OASIS database, a home grown Epilepsy database and the well known UCI repository. Results depict that the RBoost algorithm performs better than the competing methods in terms of accuracy and efficiency. PMID:21927643

  7. Generalisation of Regular and Irregular Morphological Patterns.

    ERIC Educational Resources Information Center

    Prasada, Sandeep; and Pinker, Steven

    1993-01-01

    When it comes to explaining English verbs' patterns of regular and irregular generalization, single-network theories have difficulty with the former, rule-only theories with the latter process. Linguistic and psycholinguistic evidence, based on observation during experiments and simulations in morphological pattern generation, independently call…

  8. Observing Special and Regular Education Classrooms.

    ERIC Educational Resources Information Center

    Hersh, Susan B.

    The paper describes an observation instrument originally developed as a research tool to assess both the special setting and the regular classroom. The instrument can also be used in determining appropriate placement for students with learning disabilities and for programming the transfer of skills learned in the special setting to the regular…

  9. Starting flow in regular polygonal ducts

    NASA Astrophysics Data System (ADS)

    Wang, C. Y.

    2016-06-01

    The starting flows in regular polygonal ducts of S = 3, 4, 5, 6, 8 sides are determined by the method of eigenfunction superposition. The necessary S-fold symmetric eigenfunctions and eigenvalues of the Helmholtz equation are found either exactly or by boundary point match. The results show the starting time is governed by the first eigenvalue.

  10. 28 CFR 540.44 - Regular visitors.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PERSONS IN THE COMMUNITY Visiting Regulations § 540.44 Regular visitors. An inmate desiring to have... ordinarily will be extended to friends and associates having an established relationship with the inmate... of the institution. Exceptions to the prior relationship rule may be made, particularly for...

  11. Regular Classroom Teachers' Perceptions of Mainstreaming Effects.

    ERIC Educational Resources Information Center

    Ringlaben, Ravic P.; Price, Jay R.

    To assess regular classroom teachers' perceptions of mainstreaming, a 22 item questionnaire was completed by 117 teachers (K through 12). Among results were that nearly half of the Ss indicated a lack of preparation for implementing mainstreaming; 47% tended to be very willing to accept aminstreamed students; 42% said mainstreaming was working…

  12. Regularizing cosmological singularities by varying physical constants

    SciTech Connect

    Dąbrowski, Mariusz P.; Marosek, Konrad E-mail: k.marosek@wmf.univ.szczecin.pl

    2013-02-01

    Varying physical constant cosmologies were claimed to solve standard cosmological problems such as the horizon, the flatness and the Λ-problem. In this paper, we suggest yet another possible application of these theories: solving the singularity problem. By specifying some examples we show that various cosmological singularities may be regularized provided the physical constants evolve in time in an appropriate way.

  13. Exploring the structural regularities in networks

    NASA Astrophysics Data System (ADS)

    Shen, Hua-Wei; Cheng, Xue-Qi; Guo, Jia-Feng

    2011-11-01

    In this paper, we consider the problem of exploring structural regularities of networks by dividing the nodes of a network into groups such that the members of each group have similar patterns of connections to other groups. Specifically, we propose a general statistical model to describe network structure. In this model, a group is viewed as a hidden or unobserved quantity and it is learned by fitting the observed network data using the expectation-maximization algorithm. Compared with existing models, the most prominent strength of our model is the high flexibility. This strength enables it to possess the advantages of existing models and to overcome their shortcomings in a unified way. As a result, not only can broad types of structure be detected without prior knowledge of the type of intrinsic regularities existing in the target network, but also the type of identified structure can be directly learned from the network. Moreover, by differentiating outgoing edges from incoming edges, our model can detect several types of structural regularities beyond competing models. Tests on a number of real world and artificial networks demonstrate that our model outperforms the state-of-the-art model in shedding light on the structural regularities of networks, including the overlapping community structure, multipartite structure, and several other types of structure, which are beyond the capability of existing models.

  14. Dyslexia in Regular Orthographies: Manifestation and Causation

    ERIC Educational Resources Information Center

    Wimmer, Heinz; Schurz, Matthias

    2010-01-01

    This article summarizes our research on the manifestation of dyslexia in German and on cognitive deficits, which may account for the severe reading speed deficit and the poor orthographic spelling performance that characterize dyslexia in regular orthographies. An only limited causal role of phonological deficits (phonological awareness,…

  15. Regularities in Spearman's Law of Diminishing Returns.

    ERIC Educational Resources Information Center

    Jensen, Arthur R.

    2003-01-01

    Examined the assumption that Spearman's law acts unsystematically and approximately uniformly for various subtests of cognitive ability in an IQ test battery when high- and low-ability IQ groups are selected. Data from national standardization samples for Wechsler adult and child IQ tests affirm regularities in Spearman's "Law of Diminishing…

  16. Fast Image Reconstruction with L2-Regularization

    PubMed Central

    Bilgic, Berkin; Chatnuntawech, Itthi; Fan, Audrey P.; Setsompop, Kawin; Cauley, Stephen F.; Wald, Lawrence L.; Adalsteinsson, Elfar

    2014-01-01

    Purpose We introduce L2-regularized reconstruction algorithms with closed-form solutions that achieve dramatic computational speed-up relative to state of the art L1- and L2-based iterative algorithms while maintaining similar image quality for various applications in MRI reconstruction. Materials and Methods We compare fast L2-based methods to state of the art algorithms employing iterative L1- and L2-regularization in numerical phantom and in vivo data in three applications; 1) Fast Quantitative Susceptibility Mapping (QSD), 2) Lipid artifact suppression in Magnetic Resonance Spectroscopic Imaging (MRSI), and 3) Diffusion Spectrum Imaging (DSI). In all cases, proposed L2-based methods are compared with the state of the art algorithms, and two to three orders of magnitude speed up is demonstrated with similar reconstruction quality. Results The closed-form solution developed for regularized QSM allows processing of a 3D volume under 5 seconds, the proposed lipid suppression algorithm takes under 1 second to reconstruct single-slice MRSI data, while the PCA based DSI algorithm estimates diffusion propagators from undersampled q-space for a single slice under 30 seconds, all running in Matlab using a standard workstation. Conclusion For the applications considered herein, closed-form L2-regularization can be a faster alternative to its iterative counterpart or L1-based iterative algorithms, without compromising image quality. PMID:24395184

  17. Handicapped Children in the Regular Classroom.

    ERIC Educational Resources Information Center

    Fountain Valley School District, CA.

    Reported was a project in which 60 educable mentally retarded (EMR) and 30 educationally handicapped (EH) elementary school students were placed in regular classrooms to determine whether they could be effectively educated in those settings. Effective education was defined in terms of improvement in reading, mathematics, student and teacher…

  18. Oregon Schools Begin Inspection, Cleanup.

    ERIC Educational Resources Information Center

    Buckley, James F.

    1987-01-01

    Discusses the need for environmental health inspections in schools. Reports on the results of a survey of Clackamas County (Oregon) school kitchens, in relation to a high incidence of hepatitis A. Describes the variety of violations found and urges that schools no longer be exempt from state health division regulations. (TW)

  19. Robotic Welding and Inspection System

    SciTech Connect

    H. B. Smartt; D. P. Pace; E. D. Larsen; T. R. McJunkin; C. I. Nichol; D. E. Clark; K. L. Skinner; M. L. Clark; T. G. Kaser; C. R. Tolle

    2008-06-01

    This paper presents a robotic system for GTA welding of lids on cylindrical vessels. The system consists of an articulated robot arm, a rotating positioner, end effectors for welding, grinding, ultrasonic and eddy current inspection. Features include weld viewing cameras, modular software, and text-based procedural files for process and motion trajectories.

  20. Electrical submersible pump teardown inspection

    SciTech Connect

    Lea, J.F.; Powers, W.J.

    1984-05-01

    This article deals with the details of an electrical submersible pump motor inspection. The ESP motor is shown in the disassembly fixture (vise). What to look for is discussed, such as the condition of the motor housing; if there is any heavy or light scale which could have added to motor heating and possible buildup; corrosion and any dents, scratches or bending.

  1. Artificial Intelligence Assists Ultrasonic Inspection

    NASA Technical Reports Server (NTRS)

    Schaefer, Lloyd A.; Willenberg, James D.

    1992-01-01

    Subtle indications of flaws extracted from ultrasonic waveforms. Ultrasonic-inspection system uses artificial intelligence to help in identification of hidden flaws in electron-beam-welded castings. System involves application of flaw-classification logic to analysis of ultrasonic waveforms.

  2. Learning regular expressions for clinical text classification

    PubMed Central

    Bui, Duy Duc An; Zeng-Treitler, Qing

    2014-01-01

    Objectives Natural language processing (NLP) applications typically use regular expressions that have been developed manually by human experts. Our goal is to automate both the creation and utilization of regular expressions in text classification. Methods We designed a novel regular expression discovery (RED) algorithm and implemented two text classifiers based on RED. The RED+ALIGN classifier combines RED with an alignment algorithm, and RED+SVM combines RED with a support vector machine (SVM) classifier. Two clinical datasets were used for testing and evaluation: the SMOKE dataset, containing 1091 text snippets describing smoking status; and the PAIN dataset, containing 702 snippets describing pain status. We performed 10-fold cross-validation to calculate accuracy, precision, recall, and F-measure metrics. In the evaluation, an SVM classifier was trained as the control. Results The two RED classifiers achieved 80.9–83.0% in overall accuracy on the two datasets, which is 1.3–3% higher than SVM's accuracy (p<0.001). Similarly, small but consistent improvements have been observed in precision, recall, and F-measure when RED classifiers are compared with SVM alone. More significantly, RED+ALIGN correctly classified many instances that were misclassified by the SVM classifier (8.1–10.3% of the total instances and 43.8–53.0% of SVM's misclassifications). Conclusions Machine-generated regular expressions can be effectively used in clinical text classification. The regular expression-based classifier can be combined with other classifiers, like SVM, to improve classification performance. PMID:24578357

  3. Novel Silicon Carbide Detector for Active Inspections

    SciTech Connect

    F. H. Ruddy; J.G. Seidel; R.W. Flammang

    2007-03-01

    The need to address increasingly challenging inspection requirements (such as large volume objects, very fast inspection throughputs, potentially significant shielding, etc.) for such items as nuclear materials and explosives will require the use of active interrogation technologies. While these active technologies can successfully address these challenges by inducing unique, temporal signatures, the inspection environment will also induce overall “background signals” that can be orders of magnitude larger than the induced signatures. Detectors that can successfully operate in these types of customized, inspection environments (pulsed and continuous) and successfully extract induced signature data are clearly needed and will effectively define the limitations of any active inspection system. A novel silicon carbide detector is now being investigated to successfully address both neutron- and photon/bremsstrahlung-type inspection applications. While this paper describes this detector and highlights efforts related to neutron inspection, it will focus on its neutron and gamma-ray/photon detection performance in neutron- and bremssstrahlung-type inspection applications.

  4. 49 CFR 213.367 - Special inspections.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Special inspections. In the event of fire, flood, severe storm, temperature extremes or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved...

  5. 49 CFR 213.367 - Special inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Special inspections. In the event of fire, flood, severe storm, temperature extremes or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved...

  6. 49 CFR 213.367 - Special inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Special inspections. In the event of fire, flood, severe storm, temperature extremes or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved...

  7. 49 CFR 213.367 - Special inspections.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Special inspections. In the event of fire, flood, severe storm, temperature extremes or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved...

  8. 49 CFR 213.367 - Special inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Special inspections. In the event of fire, flood, severe storm, temperature extremes or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved...

  9. Piping inspection carriage having axially displaceable sensor

    DOEpatents

    Zollinger, William T.; Treanor, Richard C.

    1994-01-01

    A pipe inspection instrument carriage for use with a pipe crawler for performing internal inspections of piping surfaces. The carriage has a front leg assembly, a rear leg assembly and a central support connecting the two assemblies and for mounting an instrument arm having inspection instruments. The instrument arm has a y-arm mounted distally thereon for axially aligning the inspection instrumentation and a mounting block, a linear actuator and axial movement arm for extending the inspection instruments radially outward to operably position the inspection instruments on the piping interior. Also, the carriage has a rotation motor and gear assembly for rotating the central support and the front leg assembly with respect to the rear leg assembly so that the inspection instruments azimuthally scan the piping interior. The instrument carriage allows performance of all piping inspection operations with a minimum of moving parts, thus decreasing the likelihood of performance failure.

  10. Piping inspection carriage having axially displaceable sensor

    DOEpatents

    Zollinger, W.T.; Treanor, R.C.

    1994-12-06

    A pipe inspection instrument carriage is described for use with a pipe crawler for performing internal inspections of piping surfaces. The carriage has a front leg assembly, a rear leg assembly and a central support connecting the two assemblies and for mounting an instrument arm having inspection instruments. The instrument arm has a Y-arm mounted distally thereon for axially aligning the inspection instrumentation and a mounting block, a linear actuator and axial movement arm for extending the inspection instruments radially outward to operably position the inspection instruments on the piping interior. Also, the carriage has a rotation motor and gear assembly for rotating the central support and the front leg assembly with respect to the rear leg assembly so that the inspection instruments azimuthally scan the piping interior. The instrument carriage allows performance of all piping inspection operations with a minimum of moving parts, thus decreasing the likelihood of performance failure. 4 figures.

  11. Tecnology Development for Robotic Surface Inspection

    NASA Technical Reports Server (NTRS)

    Volpe, Richard; Balaram, J. Bob

    1994-01-01

    For the past three years at JPL, NASA has been sponsoring the Remote Surface Inspection Project to develop the technology needed for doing periodic and on-demand inspection of space borne platforms, in particular Space Station Freedom.

  12. 46 CFR 160.042-4 - Inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-4 Inspection. (a) Life raft skids covered by this subpart are not subject to inspection at the place of manufacture,...

  13. 46 CFR 160.042-4 - Inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-4 Inspection. (a) Life raft skids covered by this subpart are not subject to inspection at the place of manufacture,...

  14. 46 CFR 160.042-4 - Inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-4 Inspection. (a) Life raft skids covered by this subpart are not subject to inspection at the place of manufacture,...

  15. 46 CFR 160.042-4 - Inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-4 Inspection. (a) Life raft skids covered by this subpart are not subject to inspection at the place of manufacture,...

  16. 46 CFR 160.042-4 - Inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-4 Inspection. (a) Life raft skids covered by this subpart are not subject to inspection at the place of manufacture,...

  17. 7 CFR 75.38 - Lot inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) REGULATIONS FOR...

  18. Maximum-likelihood constrained regularized algorithms: an objective criterion for the determination of regularization parameters

    NASA Astrophysics Data System (ADS)

    Lanteri, Henri; Roche, Muriel; Cuevas, Olga; Aime, Claude

    1999-12-01

    We propose regularized versions of Maximum Likelihood algorithms for Poisson process with non-negativity constraint. For such process, the best-known (non- regularized) algorithm is that of Richardson-Lucy, extensively used for astronomical applications. Regularization is necessary to prevent an amplification of the noise during the iterative reconstruction; this can be done either by limiting the iteration number or by introducing a penalty term. In this Communication, we focus our attention on the explicit regularization using Tikhonov (Identity and Laplacian operator) or entropy terms (Kullback-Leibler and Csiszar divergences). The algorithms are established from the Kuhn-Tucker first order optimality conditions for the minimization of the Lagrange function and from the method of successive substitutions. The algorithms may be written in a `product form'. Numerical illustrations are given for simulated images corrupted by photon noise. The effects of the regularization are shown in the Fourier plane. The tests we have made indicate that a noticeable improvement of the results may be obtained for some of these explicitly regularized algorithms. We also show that a comparison with a Wiener filter can give the optimal regularizing conditions (operator and strength).

  19. A highly redundant robot system for inspection

    NASA Technical Reports Server (NTRS)

    Lee, Thomas S.; Ohms, Tim; Hayati, Samad

    1994-01-01

    The work on the serpentine inspection system at JPL is described. The configuration of the inspection system consists of 20 degrees of freedom in total. In particular, the design and development of the serpentine micromanipulator end-effector tool which has 12 degrees of freedom is described. The inspection system is used for application in JPL's Remote Surface Inspection project and as a research tool in redundant manipulator control.

  20. Numerical simulation of an initial tsunami waveform based on sea-level data inversion: case study for the Shicotan event of the 4th October 1994

    NASA Astrophysics Data System (ADS)

    Voronina, T.

    2012-04-01

    The recent disaster of Japanese tsunami in March 2011, which caused nearly 16,000 deaths and estimated at US35-billion to US40-billion the insured cost, served as a last wake-up call to world community. Since then, the development of technology of an early warning system including methods for forecasting in real-time the tsunami waves propagation has provided a way to mitigate the adverse impacts of future tsunamis. The development of tsunami simulation models makes it possible to identify regions at tsunami risk. One of the most important issues of the tsunami modeling is gaining some insight of a tsunami source - the case in hand is the tsunami wave generated by the sea surface deformation. The latter is presumed to be equal to the co-seismic vertical displacement of the sea floor. This paper proposes an approach to recover initial tsunami waveform in tsunami source area based on the inversion of remote measurements of sea-level data. This inverse problem is treated as an ill-posed problem of hydrodynamic inversion with tsunami tide gauge records. Tsunami wave propagation is considered within the scope of the linear shallow-water theory. The direct problem is approximated by a finite-difference technique. The ill-posed inverse problem of recovering initial tsunami waveform is regularized by means of a least square inversion using the truncated SVD approach. The numerical simulating yields the so-called r-solution. The algorithm is verified with bathymetry data of the Sea of Okhotsk, synthetic and real records. In this paper, we make an attempt to answer the following questions: (1) How accurately can a tsunami source be recovered using recordings at a given tide gauge network? (2) Is it possible to improve the quality of recovering a tsunami source by distinguishing the "most informative" part of the given observation system? For answering these questions, we have carried out a series of numerical experiments. Based on the characteristics of a given tide gauges

  1. Generator acceptance test and inspection report

    SciTech Connect

    Johns, B.R.

    1997-07-24

    This Acceptance Test Report(ATR) is the completed testing and inspection of the new portable generator. The testing and inspection is to verify that the generator provided by the vendor meets the requirements of specification WHC-S-0252, Revision 2. Attached is various other documentation to support the inspection and testing.

  2. 49 CFR 213.239 - Special inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Inspection § 213.239 Special inspections. In the event of fire, flood, severe storm, or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved as soon as possible after the occurrence and, if...

  3. 49 CFR 213.239 - Special inspections.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Inspection § 213.239 Special inspections. In the event of fire, flood, severe storm, or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved as soon as possible after the occurrence and, if...

  4. 49 CFR 213.239 - Special inspections.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Inspection § 213.239 Special inspections. In the event of fire, flood, severe storm, or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved as soon as possible after the occurrence and, if...

  5. 49 CFR 213.239 - Special inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Inspection § 213.239 Special inspections. In the event of fire, flood, severe storm, or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved as soon as possible after the occurrence and, if...

  6. 49 CFR 213.239 - Special inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Inspection § 213.239 Special inspections. In the event of fire, flood, severe storm, or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved as soon as possible after the occurrence and, if...

  7. 10 CFR 1016.43 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Inspections. 1016.43 Section 1016.43 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) SAFEGUARDING OF RESTRICTED DATA Control of Information § 1016.43 Inspections. The DOE shall make such inspections and surveys of the premises, activities, records, and...

  8. 10 CFR 50.70 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Inspections. 50.70 Section 50.70 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND UTILIZATION FACILITIES Inspections, Records, Reports, Notifications § 50.70 Inspections. (a) Each applicant for or holder of a license, including a...

  9. 9 CFR 93.323 - Inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... with facilities necessary for proper chute inspection, dipping, and testing, as provided in this part. ... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Inspection. 93.323 Section 93.323 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF...

  10. 9 CFR 93.323 - Inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... with facilities necessary for proper chute inspection, dipping, and testing, as provided in this part. ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Inspection. 93.323 Section 93.323 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF...

  11. 9 CFR 93.323 - Inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... with facilities necessary for proper chute inspection, dipping, and testing, as provided in this part. ... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Inspection. 93.323 Section 93.323 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF...

  12. 42 CFR 73.18 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Inspections. 73.18 Section 73.18 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES QUARANTINE, INSPECTION, LICENSING SELECT AGENTS AND TOXINS § 73.18 Inspections. (a) Without prior notification, the HHS Secretary, shall...

  13. 7 CFR 996.12 - Outgoing inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.12 Outgoing inspection. Outgoing inspection means the sampling, inspection, and certification of either: shelled peanuts... peanuts which have been cleaned, sorted, and otherwise prepared for inshell human consumption markets....

  14. 7 CFR 996.12 - Outgoing inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.12 Outgoing inspection. Outgoing inspection means the sampling, inspection, and certification of either: shelled peanuts... peanuts which have been cleaned, sorted, and otherwise prepared for inshell human consumption markets....

  15. 7 CFR 996.12 - Outgoing inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.12 Outgoing inspection. Outgoing inspection means the sampling, inspection, and certification of either: shelled peanuts... peanuts which have been cleaned, sorted, and otherwise prepared for inshell human consumption markets....

  16. 7 CFR 996.12 - Outgoing inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.12 Outgoing inspection. Outgoing inspection means the sampling, inspection, and certification of either: shelled peanuts... peanuts which have been cleaned, sorted, and otherwise prepared for inshell human consumption markets....

  17. 7 CFR 996.12 - Outgoing inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.12 Outgoing inspection. Outgoing inspection means the sampling, inspection, and certification of either: shelled peanuts... peanuts which have been cleaned, sorted, and otherwise prepared for inshell human consumption markets....

  18. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a) Each bridge management program shall prescribe a procedure for protection of train operations and for inspection of any bridge that might have been damaged by a natural or accidental event, including but...

  19. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Special inspections. 237.105 Section 237.105 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a) Each bridge management program...

  20. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Special inspections. 237.105 Section 237.105 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a) Each bridge management program...