Science.gov

Sample records for 5th regular inspection

  1. Regularization approach for tomosynthesis X-ray inspection

    NASA Astrophysics Data System (ADS)

    Tigkos, Konstantinos; Hassler, Ulf; Holub, Wolfgang; Woerlein, Norbert; Rehak, Markus

    2014-02-01

    X-ray inspection is intended to be used as an escalation technique for inspection of carbon fiber reinforced plastics (CFRP) in aerospace applications, especially in case of unclear indications from ultrasonic or other NDT modalities. Due to their large dimensions, most aerospace components cannot be scanned by conventional computed tomography. In such cases, X-ray Laminography may be applied, allowing a pseudo 3D slice-by-slice reconstruction of the sample with Tomosynthesis. However, due to the limited angle acquisition geometry, reconstruction artifacts arise, especially at surfaces parallel to the imaging plane. To regularize the Tomosynthesis approach, we propose an additional prescan of the object to detect outer sample surfaces. We recommend the use of contrasted markers which are temporarily attached to the sample surfaces. The depth position of the markers is then derived from that prescan. As long as the sample surface remains simple, few markers are required to fit the respective object surfaces. The knowledge about this surface may then be used to regularize the final Tomosynthesis reconstruction, performed with markerless projections. Eventually, it can also serve as prior information for an ART reconstruction or to register a CAD model of the sample. The presented work is carried out within the European FP7 project QUICOM. We demonstrate the proposed approach within a simulation study applying an acquisition geometry suited for CFRP part inspection. A practical verification of the approach is planned later in the project.

  2. Regularization approach for tomosynthesis X-ray inspection

    SciTech Connect

    Tigkos, Konstantinos; Hassler, Ulf; Holub, Wolfgang; Woerlein, Norbert; Rehak, Markus

    2014-02-18

    X-ray inspection is intended to be used as an escalation technique for inspection of carbon fiber reinforced plastics (CFRP) in aerospace applications, especially in case of unclear indications from ultrasonic or other NDT modalities. Due to their large dimensions, most aerospace components cannot be scanned by conventional computed tomography. In such cases, X-ray Laminography may be applied, allowing a pseudo 3D slice-by-slice reconstruction of the sample with Tomosynthesis. However, due to the limited angle acquisition geometry, reconstruction artifacts arise, especially at surfaces parallel to the imaging plane. To regularize the Tomosynthesis approach, we propose an additional prescan of the object to detect outer sample surfaces. We recommend the use of contrasted markers which are temporarily attached to the sample surfaces. The depth position of the markers is then derived from that prescan. As long as the sample surface remains simple, few markers are required to fit the respective object surfaces. The knowledge about this surface may then be used to regularize the final Tomosynthesis reconstruction, performed with markerless projections. Eventually, it can also serve as prior information for an ART reconstruction or to register a CAD model of the sample. The presented work is carried out within the European FP7 project QUICOM. We demonstrate the proposed approach within a simulation study applying an acquisition geometry suited for CFRP part inspection. A practical verification of the approach is planned later in the project.

  3. 5th Conference on Aerospace Materials, Processes, and Environmental Technology

    NASA Technical Reports Server (NTRS)

    Cook, M. B. (Editor); Stanley, D. Cross (Editor)

    2003-01-01

    Records are presented from the 5th Conference on Aerospace Materials, Processes, and Environmental Technology. Topics included pollution prevention, inspection methods, advanced materials, aerospace materials and technical standards,materials testing and evaluation, advanced manufacturing,development in metallic processes, synthesis of nanomaterials, composite cryotank processing, environmentally friendly cleaning, and poster sessions.

  4. 24 CFR 15.102 - Where and when may I inspect and copy records that FOIA requires HUD to make regularly available...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... copy records that FOIA requires HUD to make regularly available to the public? 15.102 Section 15.102... HUD EMPLOYEES FOIA Disclosure of Information § 15.102 Where and when may I inspect and copy records that FOIA requires HUD to make regularly available to the public? (a) You may inspect and copy...

  5. 168. GENERAL VIEW FROM 5TH AVE. VIEW SOUTH, ACROSS 5TH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    168. GENERAL VIEW FROM 5TH AVE. VIEW SOUTH, ACROSS 5TH AVE., TOWARD BUILDING 506 (ON LEFT) AND BUILDING 435. - Quonset Point Naval Air Station, Roger Williams Way, North Kingstown, Washington County, RI

  6. Kids & Family Reading Report™. 5th Edition

    ERIC Educational Resources Information Center

    Scholastic Inc., 2015

    2015-01-01

    This report presents the 5th Edition of Scholastic's biannual study of children's and parents' attitudes and behaviors about reading. The latest research touches on reading aloud to children of all ages, the impact of reading independently for fun at school and at home, the importance of frequent reading, and the books children want most to read.…

  7. BOOK REVIEW: ENVIRONMENTAL ENGINEERING, 5TH EDITION

    EPA Science Inventory

    Book Review of Environmental Engineering, 5th Edition (Joseph A. Salvato, Nelson L. Nemerow, Franklin J. Agardy (Editors), John Wiley and Sons, Inc. Hoboken, New Jersey. 2003.). Author wrote review per the request of the Editor-in-Chief of the Journal of Environmental Quality.

  8. Multifrequency Catalogue of Blazars - 5th Edition

    NASA Astrophysics Data System (ADS)

    Massaro, E.; Maselli, A.; Leto, C.; Marchegiani, P.; Perri, M.; Giommi, P.; Piranomonte, S.

    2014-12-01

    The 5th Edition of the Multifrequency Catalogue of Blazars is one of the most complete lists of Active Galactic Nuclei whose emission properties are recognised as typical of blazars. It includes the list of sources and an essential compilation of multifrequency data from radio to gamma rays. The source list for the entire sky is also available online at the ASDC web site (http://www.asdc.asi.it/bzcat/) where it is frequently updated to add new blazars and to improve the database.

  9. Working Together for Student Achievement. 5th Biennial Joint Report

    ERIC Educational Resources Information Center

    Washington State Board of Education, 2014

    2014-01-01

    The Washington state Board of Education (SBE) and the Professional Educator Standards Board (PESB) submitted this 5th biennial joint report to the Governor, Legislative Education Committees, and Superintendent of Public Instruction. The report outlines the collaborative work of the Boards, highlights accomplishments, and provides goals and…

  10. 5th Latin American pesticide residue workshop (LAPRW 2015)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This invited editorial proceedings article introduces the 6 research papers published in the special topical collection for the 5th Latin American Pesticide Residue Workshop held in Santiago, Chile, May 10-13, 2015. The meeting was a great success with more than 50 talks, 140 posters, 21 vendors, a...

  11. 5th Annual Global College of Neuroprotection and Neuroregeneration.

    PubMed

    Sharma, Hari Shanker

    2008-06-01

    The 5th Global College of Neuroprotection and Neuroregeneration (GCNN) was held in the historic charming capital city of Bucharest, Romania in JW Marriott Grand Hotel on 3-6 March, 2008. The meeting was a unique blend of basic researchers and clinicians across the Globe presenting their recent findings in neuroprotection and neuroregeneration in a beautiful exotic ambience. More than 300 students and researchers attended the congress and participated in deliberations. Over 60 representatives from various pharmaceutical industries from all over the world supported this event. This meeting was held for the first time as a joint venture with GCNN and the Society for study on Neuroproetction and Neuroplasticity (SSNN), and was a grand success both scientifically and socially. Thus, these joint meetings of the two societies (GCNN and SSNN) will continue in future in different European cities for the coming 5 years. PMID:18505353

  12. 167. GENERAL VIEW DOWN 5TH AVE. VIEW TO SOUTHWEST DOWN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    167. GENERAL VIEW DOWN 5TH AVE. VIEW TO SOUTHWEST DOWN 5TH AVE. SHOWING FROM LEFT TO RIGHT, BUILDING 504, 436, 11, AND 155. - Quonset Point Naval Air Station, Roger Williams Way, North Kingstown, Washington County, RI

  13. PREFACE: 5th Baltic Conference on Silicate Materials

    NASA Astrophysics Data System (ADS)

    Mezinskis, G.; Bragina, L.; Colombo, P.; Frischat, G. H.; Grabis, J.; Greil, P.; Deja, J.; Kaminskas, R.; Kliava, J.; Medvids, A.; Nowak, I.; Siauciunas, R.; Valancius, Z.; Zalite, I.

    2011-12-01

    Logo This Volume of IOP Conference Series: Materials Science and Engineering presents a selection of the contributions to the 5th Baltic Conference on Silicate Materials (BaltSilica2011) held at Riga Technical University, Riga, Latvia from 23-25 May 2011. The conference was organized by Riga Technical University (Latvia) and Kaunas University of Technology (Lithuania). The series of Baltic conferences on silicate materials was started since 2004: the first conference was held in Riga, Latvia, 2004; the second conference was held in Kaunas, Lithuania 2005; the third was held again in Riga, Latvia, 2007, and the fourth was held in Kaunas, Lithuania 2009. BaltSilica 2011 was attended by around 50 participants from Latvia, Lithuania, Estonia, Germany, Poland, Italy, France, Ukraine and Russia. In comparison with previous silicate materials conferences, the broadening of participating countries is an indication of the interest of scientists, engineers and students to exchange research ideas, latest results, and to find new research topics for cooperation in the fields of silicate, high temperature materials, and inorganic nanomaterials. The scientific programme included 8 invited plenary lectures 23 oral presentations and 25 posters [1]. Scientific themes covered in the conference and in this special issue: Natural and Artificial Stone Materials; Traditional and New Ceramic and Glass-Like Materials; Nanoparticles and Nanomaterials. This volume consists of 23 selected proceeding papers. The Editor of this special issue is grateful to all the contributors to BaltSilica 2011. I am also very grateful to the scientific committee, the local organizing committee, the session chairs, the referees who refereed the submitted articles to this issue, and to students from the Department of Silicate, High Temperature and Inorganic Nanomaterials Technology of the Riga Technical University who ensured the smooth running of the conference. Particular thanks goes to eight plenary

  14. Managing Haemophilia for Life: 5th Haemophilia Global Summit.

    PubMed

    Hermans, Cedric; Dolan, Gerry; Jennings, Ian; Windyga, Jerzy; Lobet, Sébastien; Rodríguez-Merchán, E Carlos; Di Minno, Matteo Nicola Dario; Jiménez-Yuste, Víctor; O'Mahony, Brian

    2015-10-01

    The 5th Haemophilia Global Summit was held in Barcelona, Spain, in September 2014. The programme was designed by an independent Scientific Steering Committee of haemophilia experts and explored issues relevant to the practical management of haemophilia, as well as key opportunities and challenges for care in the future. The topics outlined in this supplement were selected by the Scientific Steering Committee for their relevance to improving haemophilia care globally. In this supplement from the meeting, Gerry Dolan explores pharmacokinetics and dynamics in haemophilia, and Gerry Dolan and Ian Jennings jointly address the role of the laboratory in haemophilia care. The potential benefits of low-dose prophylaxis regimens for people with haemophilia in the developing world are reviewed by Jerzy Windyga, and the question of whether 'Future haemophilia research should be undertaken in the developing world' is debated by Jerzy Windyga and Cedric Hermans. Management strategies for ankle arthropathy are discussed by Sébastien Lobet and E. Carlos Rodríguez-Merchán, and the use of ultrasound for the early detection of haemophilic arthropathy is addressed by Matteo Nicola Dario Di Minno and Víctor Jiménez-Yuste. Finally, the role of patients in the future of haemophilia care is reviewed by Brian O'Mahony. PMID:26350039

  15. Teaching 5th grade science for aesthetic understanding

    NASA Astrophysics Data System (ADS)

    Girod, Mark A.

    Many scientists speak with great zeal about the role of aesthetics and beauty in their science and inquiry. Few systematic efforts have been made to teach science in ways that appeal directly to aesthetics and this research is designed to do just that. Drawing from the aesthetic theory of Dewey, I describe an analytic lens called learning for aesthetic understanding that finds power in the degree to which our perceptions of the world are transformed, our interests and enthusiasm piqued, and our actions changed as we seek further experiences in the world. This learning theory is contrasted against two other current and popular theories of science learning, that of learning for conceptual understanding via conceptual change theory and learning for a language-oriented or discourse-based understanding. After a lengthy articulation of the pedagogical strategies used to teach for aesthetic understanding the research is described in which comparisons are drawn between students in two 5th grade classrooms---one taught for the goal of conceptual understanding and the other taught for the goal of aesthetic understanding. Results of this comparison show that more students in the treatment classroom had aesthetic experiences with science ideas and came to an aesthetic understanding when studying weather, erosion, and structure of matter than students in the control group. Also statistically significant effects are shown on measures of interest, affect, and efficacy for students in the treatment class. On measures of conceptual understanding it appears that treatment class students learned more and forgot less over time than control class students. The effect of the treatment does not generally depend on gender, ethnicity, or prior achievement except in students' identity beliefs about themselves as science learners. In this case, a significant interaction for treatment class females on science identity beliefs did occur. A discussion of these results as well as elaboration and

  16. Overlay improvement by ASML HOWA 5th alignment strategy

    NASA Astrophysics Data System (ADS)

    Wang, Raf; Chiang, CY; Hsu, Wilson; Yang, Richer; Shih, Todd; Chen, Jackie; Chiu, Jonathan; Lin, Wythe

    2009-12-01

    Overlay control is more challenging when DRAM volume production continues to shrink its critical dimention (CD) to 70nm and beyond. Effected by process, the overlay behavior at wafer edge is quite different from wafer center. The big contribution to worse overlay at wafer edge which causes yield loss is misalignment. The analysis in wafer edge suggests that high order uncorrectable overlay residuals are often observed by certain process impact. Therefore, the basic linear model used for alignment correction is not sufficient and it is necessary to introduce an advanced alignment correction model for wafer edge overlay improvement. In this study, we demonstrated the achievement of moderating the poor overlay at wafer edge area by using a high order wafer alignment strategy. The mechanism is to use non-linear correction methods of high order models ( up to 5th order), with support by the function High Order Wafer Alignment (known as HOWA) in scanner. Instead of linear model for the 6 overlay parameters which come from average result, HOWA alignment strategy can do high order fitting through the wafer to get more accurate overlay parameters which represent the local wafer grid distortion better. As a result, the overlay improvement for wafer edge is achieved. Since alignment is a wafer dependent correction, with HOWA the wafer to wafer overlay variation can be improved dynamically as well. In addition, the effects of different mark quantity and sampling distribution from HOWA are also introduced in this paper. The results of this study indicate that HOWA can reduce uncorrectable overlay residual by 30~40% and improve wafer-to-wafer overlay variation significantly. We conclude that HOWA is a noteworthy strategy for overlay improvement. Moreover, optimized alignment mark numbers and distribution layout are also key factors to make HOWA successful.

  17. PREFACE: 5th Workshop of Young Researchers in Astronomy & Astrophysics

    NASA Astrophysics Data System (ADS)

    Forgács-Dajka, Emese; Plachy, Emese; Molnár, László

    2010-04-01

    The 5th Workshop of Young Researchers in Astronomy and Astrophysics was held on 2-4 September 2009 at the Eötvös University in Budapest, Hungary. This meeting fits into a conference series which can already be considered a tradition where the younger generation has the opportunity to present their work. The event was also a great opportunity for senior astronomers and physicists to form new connections with the next generation of researchers. The selection of invited speakers concentrated on the researchers currently most active in the field, mostly on a post-doctoral/tenure/fresh faculty position level. A number of senior experts and PhD students were also invited. As the conference focused on people rather than a specific field, various topics from theoretical physics to planetology were covered in three days. The programme was divided into six sections: Physics of the Sun and the Solar System Gravity and high-energy physics Galactic and extragalactic astronomy, cosmology Celestial mechanics and exoplanets Infrared astronomy and young stars Variable stars We had the pleasure of welcoming 10 invited review talks from senior researchers and 42 contributed talks and a poster from the younger generation. Participants also enjoyed the hospitality of the pub Pál at the Pálvölgyi-cave after giving, hearing and disputing countless talks. Brave souls even descended to the unbuilt, adventurous Mátyásvölgyi-cave. Memories of the conference were shadowed though. Péter Csizmadia, one of our participants and three other climbers attempted a first ever ascent to the Ren Zhong Feng peak in Sichuan, China, but they never returned from the mountains. Péter departed to China shortly after the conference, with best wishes from participants and friends. We dedicate this volume to his memory. The organisers thankthe Physics Doctoral School of Eötvös University for its hospitality. The workshop was supported by the Mecenatúra and Polányi Mihály Programmes of the National

  18. The utility of a 5th nap in multiple sleep latency test

    PubMed Central

    Lykouras, Dimosthenis; Rees, Kate

    2016-01-01

    Background This is the first study that aimed to look specifically at the utility of the 5th nap in the multiple sleep latency test (MSLT), a test used to assist in the diagnosis of narcolepsy. Methods Data was retrospectively collected from the Sleep Disorders Centre of a Tertiary Hospital on patients that had a 5th nap during their MSLT from the 08th November 2011 to 12th November 2014. Results Fifty-three patients had a 5th nap performed out of 378 MSLT studies. In 16% of cases a diagnosis of narcolepsy was given directly due to the inclusion of the 5th nap on the MSLT. Here a 5th nap allowed diagnostic criteria of mean sleep latency <8 minutes and >2 SOREMPS to be met. In 53% of cases the mean sleep latency increased due to 5th nap inclusion; the mean sleep latency of the first four naps was 5.6 vs. 6.7 after inclusion of the 5th nap. Conclusions The 5th nap is not often performed within the MSLT studies. Our study shows that only a few patients may benefit from a 5th nap opportunity which also led to increase of the mean sleep latency at the expense of extra time, cost, labour and increased patient anxiety. PMID:26904269

  19. PREFACE: 5th International Conference on Mechatronics (ICOM'13)

    NASA Astrophysics Data System (ADS)

    Akramin Shafie, Amir; Raisuddin Khan, Md

    2013-12-01

    The Fifth International Conference on Mechatronics (ICOM2013), took place in Kuala Lumpur Malaysia from 2-4 July 2013. The biannual conference which started in 2001 is regularly organized by Faculty of Engineering, International Islamic University Malaysia (IIUM) with the aims to serve as a platform for exchange of ideas on advances of in mechatronics and their applications as well as to foster research and worldwide collaboration. The theme for the 2013 conference was 'Mechatronics: Sustainable Development through Innovative Solutions'. The ICOM 2013 Conference consisted of Keynote Speeches (5) and oral contributions (150). The topics of the conference were: Mechatronic systems and Applications Intelligent Systems Control and Instrumentation Signal and Image Processing Machine Vision Robotics and Automation Manufacturing Mechatronics Green Mechatronics Mechatronic Education Smart Materials and Structures Active Vibration Control Computer and Information Technology MEMS and NEMS Biomechatronics and Rehabilitation Engineering Autonomous Systems Energy and Sustainability Transportation System It is our great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) to the scientific community to promote further research in these areas. We believe that this volume will be both an excellent source of scientific material in the fast evolving fields that were covered by ICOM 2013. We thank the authors for their enthusiastic and high-grade contributions. We would also like to express our gratitude to the Organizing Committee, the Institutions and Sponsors and everyone who contributed to this conference through their supports and invaluable efforts. Editors Amir A Shafie aashafie@iium.edu.my Raisuddin Khan raisuddin@iium.edu.my Mahbubur Rashid mahbub@iium.edu.my Department of Mechatronics, International Islamic University Malaysia (IIUM), Kuala Lumpur Malaysia Organizing Committee Md Raisuddin Khan Md Mozasser Rahman Shahrul Naim

  20. Some mice feature 5th pharyngeal arch arteries and double-lumen aortic arch malformations.

    PubMed

    Geyer, Stefan H; Weninger, Wolfgang J

    2012-01-01

    A 5th pair of pharyngeal arch arteries (PAAs) has never been identified with certainty in mice. Murines in general are considered to not develop a 5th pair. If true, the significance of the mouse as a model for researching the genesis of malformations of the great intrathoracic arteries is limited. We aimed to investigate whether mouse embryos develop a 5th pair of PAAs and to identify malformations known to be caused by defective remodelling of the 5th PAAs. We employed the high-resolution episcopic microscopy method for creating digital volume data and three-dimensional (3D) computer models of the great intrathoracic arteries of 30 mouse embryos from days 12-12.5 post conception and 180 mouse fetuses from days 14.5 and 15.5 post conception. The 3D models of the fetuses were screened for the presence of a double-lumen aortic arch malformation. We identified such a malformation in 1 fetus. The 3D models of the embryos were analysed for the presence of 5th PAAs. Six of the 30 embryos (20%) showed a 5th PAA bilaterally, and an additional 9 (30%) showed a 5th PAA unilaterally. Our results prove that some mice do develop a 5th pair of PAAs. They also show that malformations which occur rarely in humans and result from defective remodelling of the left 5th PAA can be identified in mice as well. Thus, the mouse does represent an excellent model for researching the mechanisms driving PAA remodelling and the genesis of malformations of the great intrathoracic arteries. PMID:22287557

  1. Work Values of 5th, 8th, and 11th Grade Students

    ERIC Educational Resources Information Center

    Hales, Loyde W.; Fenner, Bradford

    1972-01-01

    Self Realization, Job Security, Money, and Altruism were found to be the most important work values, with 5th and 8th grade students differing from 11th grade students on Altruism and Self Realization. (Author)

  2. 25. April 5th one month's work. View looking north. Storehouse ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. April 5th one month's work. View looking north. Storehouse #1 under construction, storehouse #2 site work in progress toward foreground. - U.S. Navy Fleet Supply Base, Storehouse No. 1, 830 Third Avenue, Brooklyn, Kings County, NY

  3. 17. 4th floor roof, view south, 4th and 5th floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. 4th floor roof, view south, 4th and 5th floor setback to left and atrium structure to right - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  4. 6. 5TH FLOOR, VIEW NORTH OF KETTLE SOAP STORAGE TANKS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. 5TH FLOOR, VIEW NORTH OF KETTLE SOAP STORAGE TANKS (RIGHT) AND WEIGH HOPPERS OVER SITES OF REMOVED AMALGAMATORS (LEFT) - Colgate & Company Jersey City Plant, Building No. B-14, 54-58 Grand Street, Jersey City, Hudson County, NJ

  5. PREFACE: 5th International EEIGM/AMASE/FORGEMAT Conference on Advanced Materials Research

    NASA Astrophysics Data System (ADS)

    Ayadi, Zoubir; Czerwiec, Thierry; Horwat, David; Jamart, Brigitte

    2009-07-01

    This issue of IOP Conference Series: Materials Science and Engineering, contains manuscripts of talks that will be presented at the 5th International EEIGM/AMASE/FORGEMAT Conference on Advanced Materials Research that will be held at the Ecole Européenne d'Ingénieurs en Génie des Matériaux - European School of Materials Science and Engineering (EEIGM) in Nancy on November 4-5 2009. The conference will be organized by the EEIGM. The aim of the conference is to bring together scientists from the six European universities involved in the EEIGM and in the ''Erasmus Mundus'' AMASE Master (Advanced Materials Science and Engineering) programmes and in the Tempus FORGEMAT European project: Nancy-Université - EEIGM/INPL (Nancy, France), Universität des Saarlandes (Saarbrücken, Germany), Universitat Politècnica de Catalunya - ETSEIB (Barcelona, Spain), Luleå Tekniska Universitet (Luleå, Sweden), Universidad Politecnica de Valencia - ETSII (Valencia, Spain) and AGH University of Science and Technology, (Kralow, Poland). This conference is also open to other universities who have strong links with the EEIGM and it will provide a forum for exchange of ideas, cooperation and future directions by means of regular presentations, posters and a round-table discussion. After careful refereeing of all manuscripts, equally shared between the four editors, 26 papers have been selected for publication in this issue. The papers are grouped together into different subject categories: polymers, metallurgy, ceramics, composites and nanocomposites, simulation and characterization. The editors would like to take this opportunity to thank all the participants who submitted their manuscripts during the conference and responded in time to the editors' request at every stage from reviewing to final acceptance. The editors are indebted to all the reviewers for painstakingly reviewing the papers at very short notice. Special thanks are called for the sponsors of the conference including

  6. Reflecting on the 5th World Environmental Education Congress, Montreal, 2009

    ERIC Educational Resources Information Center

    Jickling, Bob

    2010-01-01

    This article traces the development of the World Environmental Congress movement and its establishment as an important international forum. Reflecting on the 5th Congress, it notes the particular contribution of the Congress theme, "Our Common Home". Finally, it considers environmental education's place alongside other parallel transformative…

  7. 75 FR 63478 - 5th Annual PHEMCE Stakeholders Workshop and BARDA Industry Day

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-15

    ...The Department of Health and Human Services (HHS) is pleased to announce the upcoming 5th Annual Public Health Emergency Medical Countermeasures Enterprise (PHEMCE) Stakeholders Workshop and BARDA Industry Day to be held January 10-12, 2011 at the Walter E. Washington Convention Center in Washington, DC. This annual PHEMCE event will bring together private- and public-sector stakeholders......

  8. A Network Sets Things in Motion: TEDD Celebrates its 5(th) Anniversary.

    PubMed

    2015-01-01

    At the Annual Meeting at ZHAW Waedenswil on 22 October 2015, the TEDD-Network (Tissue Engineering for Drug Development and Substance Testing) celebrated its 5(th) anniversary. Since its foundation, TEDD has become an internationally renowned competence centre and includes currently 91 members from academia and industry. They cover the entire development and value chain. PMID:26671055

  9. Urban 5th Graders Conceptions during a Place-Based Inquiry Unit on Watersheds

    ERIC Educational Resources Information Center

    Endreny, Anna Henderson

    2010-01-01

    This study aimed to determine how 33 urban 5th grade students' science conceptions changed during a place-based inquiry unit on watersheds. Research on watershed and place-based education was used as a framework to guide the teaching of the unit as well as the research study. A teacher-researcher designed the curriculum, taught the unit and…

  10. The 5th World Environmental Education Congress, 2009: A Research Project

    ERIC Educational Resources Information Center

    Jickling, Bob; Sauve, Lucie; Briere, Laurence; Niblett, Blair; Root, Emily

    2010-01-01

    This paper contextualizes the 5th World Environmental Education Congress, discusses the theoretical underpinnings of the Congress theme "Earth Our Common Home," and relates this theorizing to the research project that was woven through the Congress. We provide a rationale for engaging in this research project, as an invitation for Congress…

  11. 10. Interior view, working house, scale floor (5th level). View ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Interior view, working house, scale floor (5th level). View facing across floor toward no. 2 scale and garner. Tile structure at left center is weighmaster's shack; view facing east. - Saint Anthony Elevator No. 3, 620 Malcom Avenue, Southeast, Minneapolis, Hennepin County, MN

  12. An Investigation of Science and Technology Teachers' Views on the 5th Grade Science Course

    ERIC Educational Resources Information Center

    Dasdemir, Ikramettin

    2014-01-01

    This study was conducted to explore the science and technology teachers' views on the implementation of 5th grade science course. Open-ended questions were used as a data collection tool. The study sample consisted of 28 science and technology teachers working in Erzurum in 2012-2013 education year. The data gathered were analysed via content…

  13. Vocabulary and Syntactic Knowledge Factors in 5th Grade Students' Reading Comprehension

    ERIC Educational Resources Information Center

    Mokhtari, Kouider; Niederhauser, Dale S.

    2013-01-01

    In this study, we examined 5th grade students' levels of vocabulary knowledge and syntactic awareness relative to their reading comprehension performance. The aim was to explore the contributions of vocabulary and syntactic awareness as potential sources of reading comprehension difficulty for these readers. Overall, we found that both vocabulary…

  14. 78 FR 53454 - Filing Dates for the Louisiana Special Elections in the 5th Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-29

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the Louisiana Special Elections in the 5th Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special election. SUMMARY: Louisiana has...

  15. The 5th edition of the Roma-BZCAT. A short presentation

    NASA Astrophysics Data System (ADS)

    Massaro, E.; Maselli, A.; Leto, C.; Marchegiani, P.; Perri, M.; Giommi, P.; Piranomonte, S.

    2015-05-01

    The 5th edition of the Roma-BZCAT Multifrequency Catalogue of Blazars is available in a printed version and online at the ASDC website (http://www.asdc.asi.it/bzcat); it is also in the NED database. It presents several relevant changes with respect to the past editions which are briefly described in this paper.

  16. A Longitudinal Study of a 5th Grade Science Curriculum Based on the 5E Model

    ERIC Educational Resources Information Center

    Scott, Timothy P.; Schroeder, Carolyn; Tolson, Homer; Huang, Tse-Yang; Williams, Omah M.

    2014-01-01

    The Center for Mathematics and Science Education at Texas A&M University contracted with Region 4 Education Service Center (ESC) and a large, diverse school district to conduct a longitudinal study from 2005-2009. The state achievement test scores of 5th graders who were taught using a Grade 5 science textbook designed by Region 4 ESC were…

  17. Socially, Developmentally, and Academically Appropriate Prevention Curriculum for 5th Graders

    ERIC Educational Resources Information Center

    Harthun, Mary L.; Dustman, Patricia A.; Reeves, Leslie J.; Marsiglia, Flavio F.; Hecht, Michael L.

    2009-01-01

    This paper reports on a process in which program designers, classroom teachers, and students worked together to adapt the 7th grade "keepin' it REAL" prevention curriculum to a developmentally, socially, and academically appropriate curriculum for 5th graders. A Community-Based Participatory Research methodology (CBPR), combined with a 9-step…

  18. Oral Persuasion: A Saleable Work Skill. Occupation Simulation Packet. Grades 5th-6th.

    ERIC Educational Resources Information Center

    Lee, Dennis W.

    This teacher's guide contains simulated work experiences for 5th and 6th grade students using the isolated skill concept - oral persuasion. Teacher instructions include objectives, evaluation, and sequence of activities. The guide contains pre-tests and post-tests with instructions and answer keys. Two pre-skill activities are suggested, such as…

  19. 9. 5TH FLOOR, INTERIOR DETAIL TO EAST OF SOAP BIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. 5TH FLOOR, INTERIOR DETAIL TO EAST OF SOAP BIN No. 4: UPPER SCREWS MOVED SOAP CHIPS HORIZONTALLY FROM BIN TO BIN; LOWER LEFT-AND RIGHT-HAND SCREWS MOVED CHIPS TO CHUTE LEADING TO 3RD FLOOR SOAP MILLS - Colgate & Company Jersey City Plant, Building No. B-14, 54-58 Grand Street, Jersey City, Hudson County, NJ

  20. How Arizona Compares: Real Numbers and Hot Topics. Policy Choices. 5th Edition

    ERIC Educational Resources Information Center

    Morrison Institute for Public Policy, 2005

    2005-01-01

    Morrison Institute for Public Policy is pleased to present "How Arizona Compares: Real Numbers and Hot Topics," the 5th edition of Arizona "Policy Choices." The Arizona "Policy Choices" volumes seek to do more than report. They are designed to assist decision making, stimulate debate, and serve as references. Arizona "Policy Choices" volumes have…

  1. The Effect of Progressive Sentence Development Activities on 5th Graders' Description Skills

    ERIC Educational Resources Information Center

    Hamzadayi, Ergun

    2015-01-01

    The aim of this study was to examine the effect of progressive sentence development activities on 5th graders' description skills. The study was conducted based on the pretest-posttest quasi-experimental model with a control group. A total of 58 students participated in the study; 29 in the control group, and 29 in the experimental group. The…

  2. Successfully Promoting 21st Century Online Research Skills: Interventions in 5th-Grade Classrooms

    ERIC Educational Resources Information Center

    Kingsley, Tara L.; Cassady, Jerrell C.; Tancock, Susan M.

    2015-01-01

    This quantitative study was developed to explore the ability to impact elementary student 21st Century online research skills with a planned classroom intervention curriculum. The repeated measures quasi-experimental study randomly assigned all 5th grade classes in a Midwestern, suburban school (n = 418) to a 12-week intervention or control…

  3. Effects of temperature and modified atmospheres on diapausing 5th instar codling moth metabolism

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Diapausing 5th instars of codling moth, Cydia pomonella, are serious quarantine pests of in-shell walnuts. Previous research indicates that heat treatments in combination with high concentrations of carbon dioxide and low concentrations of oxygen may be effective for controlling this pest in walnuts...

  4. VizieR Online Data Catalog: The Roma BZCAT - 5th edition (Massaro+, 2015)

    NASA Astrophysics Data System (ADS)

    Massaro, E.; Giommi, P.; Leto, C.; Marchegiani, P.; Maselli, A.; Perri, M.; Piranomonte, S.; Sclavi, S.

    2016-02-01

    In the 5th Edition we use similar denomination of blazars adopted in the previous editions. Each blazar is identified by a code, with 5BZ for all blazars, a fourth letter that specifies the type (B, G, Q or U), followed by the truncated equatorial coordinates (J2000). We introduced the edition number before the letters BZ to avoid possible confusion due to the fact that several sources changed their old names because of the new adopted classification. The codes are defined in the "Note (G1)" below. The 5th edition contains 1151 BZB sources, 92 of which are reported as candidates because we could not find their optical spectra in the literature, 1909 BZQ sources, 274 BZG sources and 227 BZU objects (1 data file).

  5. An 8 x 10 to the 5th bit bubble memory cell for spacecraft applications

    NASA Technical Reports Server (NTRS)

    Becker, F. J.; Murray, G. W.; Bohning, O. D.; Stermer, R. L.

    1980-01-01

    A multiple chip magnetic bubble memory cell design developed for NASA embodies the low power, low weight, environmental tolerance and reliability necessary for successful operation in spacecraft launch and mission environments. Packaging of multiple chips in a common magnetic bias, drive coil assembly reduces weight and volume overhead per chip and also reduces the number of coil drive components required. This 8 x 10 to the 5th bit cell is conduction cooled and provides a metal and ceramic sealed hermetic chip environment.

  6. Instantaneous frequency measurement by in-fiber 0.5th order fractional differentiation

    NASA Astrophysics Data System (ADS)

    Poveda-Wong, L.; Carrascosa, A.; Cuadrado-Laborde, C.; Cruz, J. L.; Díez, A.; Andrés, M. V.

    2016-07-01

    We experimentally demonstrate the possibility to retrieve the instantaneous frequency profile of a given temporal light pulse by in-fiber fractional order differentiation of 0.5th-order. The signal's temporal instantaneous frequency profile is obtained by simple dividing two temporal intensity profiles, namely the intensities of the input and output pulses of a spectrally-shifted fractional order differentiation. The results are supported by the experimental measurement of the instantaneous frequency profile of a mode-locked laser.

  7. Proceedings of the 5th International Symposium on Blue Laser and Light Emitting Diodes (ISBLLED-2004)

    NASA Astrophysics Data System (ADS)

    Suh, Eun-Kyung; Yoon, Euijoon; Lee, Hyung Jae

    2004-09-01

    The 5th International Symposium on Blue Laser and Light Emitting Diodes (ISBLLED-2004) was held in Gyeongju, Korea, 15-19 March 2004. The purpose of the symposium was to provide a forum for scientists and engineers to discuss recent progress and future trends in the rapidly advancing wide band gap semiconductor science and technologies and their applications in blue laser and light emitting diodes.

  8. Effects of the 5th and 7th Grade Enhanced Versions of the "keepin' it REAL" Substance Use Prevention Curriculum

    ERIC Educational Resources Information Center

    Elek, Elvira; Wagstaff, David A.; Hecht, Michael L.

    2010-01-01

    This study assessed the outcomes of adapting the culturally-grounded, middle school, substance-use prevention intervention, "keepin' it REAL" ("kiR"), to target elementary school students and to address acculturation. At the beginning of 5th grade, 29 schools were randomly assigned to conditions obtained by crossing grade of implementation (5th,…

  9. Measuring Listening Comprehension Skills of 5th Grade School Students with the Help of Web Based System

    ERIC Educational Resources Information Center

    Acat, M. Bahaddin; Demiral, Hilmi; Kaya, Mehmet Fatih

    2016-01-01

    The main purpose of this study is to measure listening comprehension skills of 5th grade school students with the help of web based system. This study was conducted on 5th grade students studying at the primary schools of Eskisehir. The scale used in the process of the study is "Web Based Listening Scale". In the process of the study,…

  10. The Effects of Reading from the Screen on the Reading Motivation Levels of Elementary 5th Graders

    ERIC Educational Resources Information Center

    Aydemir, Zeynep; Ozturk, Ergun

    2012-01-01

    This study aims to explore the effects of reading from the screen on elementary 5th grade students' reading motivation levels. It used the randomized control-group pretest-posttest model, which is a true experimental design. The study group consisted of 60 students, 30 experimental and 30 control, who were attending the 5th grade of a public…

  11. Preface to Special Topic: Selected Papers from the 5th International Conference on Optofluidics.

    PubMed

    Fan, Shih-Kang; Yang, Zhenchuan

    2016-01-01

    The 5th International Conference on Optofluidics (Optofluidics 2015) was held in Taipei, Taiwan, July 26-29, 2015. The aim of this conference was to provide a forum to promote scientific exchange and to foster closer networks and collaborative ties between leading international researchers in optics and micro/nanofluidics across various disciplines. The scope of Optofluidics 2015 was deliberately broad and interdisciplinary, encompassing the latest advances and the most innovative developments in micro/nanoscale science and technology. Topics ranged from fundamental research to its applications in chemistry, physics, biology, materials, and medicine. PMID:27076863

  12. Preface to Special Topic: Selected Papers from the 5th International Conference on Optofluidics

    PubMed Central

    Fan, Shih-Kang; Yang, Zhenchuan

    2016-01-01

    The 5th International Conference on Optofluidics (Optofluidics 2015) was held in Taipei, Taiwan, July 26–29, 2015. The aim of this conference was to provide a forum to promote scientific exchange and to foster closer networks and collaborative ties between leading international researchers in optics and micro/nanofluidics across various disciplines. The scope of Optofluidics 2015 was deliberately broad and interdisciplinary, encompassing the latest advances and the most innovative developments in micro/nanoscale science and technology. Topics ranged from fundamental research to its applications in chemistry, physics, biology, materials, and medicine. PMID:27076863

  13. A Social Medium: ASM's 5th Cell-Cell Communication in Bacteria Meeting in Review

    PubMed Central

    Federle, Michael J.

    2015-01-01

    The 5th American Society for Microbiology Conference on Cell-Cell Communication in Bacteria (CCCB-5), which convened from 18 to 21 October 2014 in San Antonio, TX, highlighted recent advances in our understanding of microbial intercellular signaling. While the CCCB meetings arose from interests in pheromone signaling and quorum sensing, it was evident at CCCB-5 that the cell-cell communication field is continuing to mature, expanding into new areas and integrating cutting-edge technologies. In this minireview, we recap some of the research discussed at CCCB-5 and the questions that have arisen from it. PMID:25917904

  14. 5th Bionanotox and Applications International Research Conference, Peabody, Little Rock, Arkansas, USA

    NASA Astrophysics Data System (ADS)

    Sabb, Taneicie; Chowdhury, Parimal

    2011-06-01

    "BioNanoTox and Toxicity: using Technology to Advance Discovery" was this year's theme at the 5th BioNanoTox and Applications International Research Conference held at the Peabody Hotel, Little Rock, Arkansas on November 4-5th, 2010. This year, the international participation in this conference increased to 25 countries spanning the globe. The conference began with opening remarks by Paul Howard, Associate Director of the National Center for Toxicological Research, Food and Drug Administration, Jefferson, Arkansas, United States. Two keynote speakers, Dr. Ananth V. Annapragada and Dr. Merle G. Paule presented lectures on "Toxicity of Novel Nanoparticles for CT imaging" and "The Biology of Neurotoxicity: using Technology to Advance Discovery", respectively. Teachers, students, faculty, and scientists presented oral and poster presentations on fundamental and translational research related to BioNanoTox and related fields of science. Six presentation sessions were held over the two-day conference. There were 31 presentations and 39 posters from disciplines ranging from biology to chemistry, toxicology, nanotechnology, computational sciences, mathematics, engineering, plant science, and biotechnology. Poster presentation awards were presented to three high school students, three high school teachers, and three college students. In addition to poster awards a memorial, travel, and BioNanoTox award were presented. This year's meeting paved the way for a more outstanding meeting for the future.

  15. EDITORIAL: 'Best article' prize for the 5th anniversary of Environmental Research Letters 'Best article' prize for the 5th anniversary of Environmental Research Letters

    NASA Astrophysics Data System (ADS)

    Kammen, Dan; Wright, Guillaume

    2011-12-01

    To celebrate the 5th anniversary of Environmental Research Letters (ERL) the publishers of the journal, IOP Publishing, have awarded a prize for the five best articles published in ERL since the journal began in 2006. The procedure for deciding the winning articles was as thorough as possible to ensure that the most outstanding articles would win the prize. A shortlist of 25 nominated research articles, five for each year since ERL was launched, which were chosen based on a range of criteria including novelty, scientific impact, readership, broad appeal and wider media coverage, was selected. The ERL Editorial Board then assessed and rated these 25 articles in order to choose a winning article for each year. We would like to announce that the following articles have been awarded ERL's 5th anniversary best article prize: 2006/7 The Bodélé depression: a single spot in the Sahara that provides most of the mineral dust to the Amazon forest Ilan Koren, Yoram J Kaufman, Richard Washington, Martin C Todd, Yinon Rudich, J Vanderlei Martins and Daniel Rosenfeld 2006 Environ. Res. Lett. 1 014005 2008 Causes and impacts of the 2005 Amazon drought Ning Zeng, Jin-Ho Yoon, Jose A Marengo, Ajit Subramaniam, Carlos A Nobre, Annarita Mariotti and J David Neelin 2008 Environ. Res. Lett. 3 014002 2009 How difficult is it to recover from dangerous levels of global warming? J A Lowe, C Huntingford, S C B Raper, C D Jones, S K Liddicoat and L K Gohar 2009 Environ. Res. Lett. 4 014012 2010 Is physical water scarcity a new phenomenon? Global assessment of water shortage over the last two millennia Matti Kummu, Philip J Ward, Hans de Moel and Olli Varis 2010 Environ. Res. Lett. 5 034006 2011 Implications of urban structure on carbon consumption in metropolitan areas Jukka Heinonen and Seppo Junnila 2011 Environ. Res. Lett. 6 014018 Our congratulations go to these authors. In recognition of their outstanding work, we are delighted to offer all of the authors of the winning articles free

  16. EDITORIAL: 'Best article' prize for the 5th anniversary of Environmental Research Letters 'Best article' prize for the 5th anniversary of Environmental Research Letters

    NASA Astrophysics Data System (ADS)

    Kammen, Dan; Wright, Guillaume

    2011-12-01

    To celebrate the 5th anniversary of Environmental Research Letters (ERL) the publishers of the journal, IOP Publishing, have awarded a prize for the five best articles published in ERL since the journal began in 2006. The procedure for deciding the winning articles was as thorough as possible to ensure that the most outstanding articles would win the prize. A shortlist of 25 nominated research articles, five for each year since ERL was launched, which were chosen based on a range of criteria including novelty, scientific impact, readership, broad appeal and wider media coverage, was selected. The ERL Editorial Board then assessed and rated these 25 articles in order to choose a winning article for each year. We would like to announce that the following articles have been awarded ERL's 5th anniversary best article prize: 2006/7 The Bodélé depression: a single spot in the Sahara that provides most of the mineral dust to the Amazon forest Ilan Koren, Yoram J Kaufman, Richard Washington, Martin C Todd, Yinon Rudich, J Vanderlei Martins and Daniel Rosenfeld 2006 Environ. Res. Lett. 1 014005 2008 Causes and impacts of the 2005 Amazon drought Ning Zeng, Jin-Ho Yoon, Jose A Marengo, Ajit Subramaniam, Carlos A Nobre, Annarita Mariotti and J David Neelin 2008 Environ. Res. Lett. 3 014002 2009 How difficult is it to recover from dangerous levels of global warming? J A Lowe, C Huntingford, S C B Raper, C D Jones, S K Liddicoat and L K Gohar 2009 Environ. Res. Lett. 4 014012 2010 Is physical water scarcity a new phenomenon? Global assessment of water shortage over the last two millennia Matti Kummu, Philip J Ward, Hans de Moel and Olli Varis 2010 Environ. Res. Lett. 5 034006 2011 Implications of urban structure on carbon consumption in metropolitan areas Jukka Heinonen and Seppo Junnila 2011 Environ. Res. Lett. 6 014018 Our congratulations go to these authors. In recognition of their outstanding work, we are delighted to offer all of the authors of the winning articles free

  17. Exploratory Factor Analysis of Diagnostic and Statistical Manual, 5th Edition, Criteria for Posttraumatic Stress Disorder.

    PubMed

    McSweeney, Lauren B; Koch, Ellen I; Saules, Karen K; Jefferson, Stephen

    2016-01-01

    One change to the posttraumatic stress disorder (PTSD) nomenclature highlighted in the Diagnostic and Statistical Manual, 5th Edition (DSM-5; American Psychiatric Association, 2013) is the conceptualization of PTSD as a diagnostic category with four distinct symptom clusters. This article presents exploratory factor analysis to test the structural validity of the DSM-5 conceptualization of PTSD via an online survey that included the PTSD Checklist-5. The study utilized a sample of 113 college students from a large Midwestern university and 177 Amazon Mechanical Turk users. Participants were primarily female, Caucasian, single, and heterosexual with an average age of 32 years. Approximately 30% to 35% of participants met diagnostic criteria for PTSD based on two different scoring criteria. Results of the exploratory factor analysis revealed five distinct symptom clusters. The implications for the classification of PTSD are discussed. PMID:26669983

  18. Genomics into Healthcare: The 5th Pan Arab Human Genetics Conference and 2013 Golden Helix Symposium

    PubMed Central

    Fortina, Paolo; AlKhaja, Najib; Al Ali, Mahmoud Taleb; Hamzeh, Abdul Rezzak; Nair, Pratibha; Innocenti, Federico; Patrinos, George P.; Kricka, Larry J.

    2014-01-01

    The joint 5th Pan Arab Human Genetics conference and 2013 Golden Helix Symposium, “Genomics into Healthcare” was coorganized by the Center for Arab Genomic Studies (http://www.cags.org.ae) in collaboration with the Golden Helix Foundation (http://www.goldenhelix.org) in Dubai, United Arab Emirates from 17 to 19 November, 2013. The meeting was attended by over 900 participants, doctors and biomedical students from over 50 countries and was organized into a series of nine themed sessions that covered cancer genomics and epigenetics, genomic and epigenetic studies, genomics of blood and metabolic disorders, cytogenetic diagnosis and molecular profiling, next-generation sequencing, consanguinity and hereditary diseases, clinical genomics, clinical applications of pharmacogenomics, and genomics in public health. PMID:24526565

  19. Dental health in antique population of Vinkovci - Cibalae in Croatia (3rd-5th century).

    PubMed

    Peko, Dunja; Vodanović, Marin

    2016-08-01

    Roman city Cibalae (Vinkovci) - the birthplace of Roman emperors Valentinian I and Valens was a very well developed urban ares in the late antique what was evidenced by numerous archaeological findings. The aim of this paper is to get insight in dental health of antique population of Cibalae. One hundred individuals with 2041 teeth dated to 3rd - 5th century AD have been analyzed for caries, antemortem tooth loss, periapical diseases and tooth wear. Prevalence of antemortem tooth loss was 4.3% in males, 5.2% in females. Prevalence of caries per tooth was 8.4% in males, 7.0% in females. Compared to other Croatian antique sites, ancient inhabitants of Roman Cibalae had rather good dental health with low caries prevalence and no gender differences. Statistically significant difference was found between males in females in the prevalence of periapical lesions and degree of tooth wear. Periapical lesions were found only in males. PMID:27598951

  20. Theoretical studies of Ir5Th and Ir5Ce nanoscale precipitates in Ir

    SciTech Connect

    Morris, James R; Averill, Frank; Cooper, Valentino R

    2014-01-01

    Experimentally, it is known that very small amounts of thorium and/or cerium added to iridium metal form a precipitate, Ir5Th / Ir5Ce, which improves the high temperature mechanical properties of the resulting alloys. We demonstrate that there are low-energy configurations for nano-scale precipitates of these phases in Ir, and that these coherent arrangements may assist in producing improved mechanical properties. One precipitate/matrix orientation gives a particularly low interfacial energy, and a low lattice misfit. Nanolayer precipitates with this orientation are found to be likely to form, with little driving force to coarsen. The predicted morphology of the precipitates and their orientation with the matrix phase provide a potential experiment that could be used to test these predictions.

  1. APTWG: The 5th Asia-Pacific Transport Working Group Meeting

    NASA Astrophysics Data System (ADS)

    Gao, X.; Ghim, Y.-C.; Sun, Y. W.; Gao, Z.; Inagaki, S.; Chen, W.; Zhang, T.; Wang, Z. X.

    2016-03-01

    This conference report gives a summary on the contributed papers and discussions presented at the 5th Asia-Pacific Transport Working Group Meeting held at Dalian, China from 9-12 June 2015. The main goal of the working group is to develop a predictive understanding of the basic mechanisms responsible for particle, momentum and energy transport in magnetically confined plasmas. The topics of the meeting in 2015 were organized under five main headings: (1) turbulence suppression and transport barrier formation, (2) effect of magnetic topology on MHD activity and transport, (3) non-diffusive contribution of momentum and particle transport, (4) non-local transport and turbulence spreading and coupling and (5) energetic particles and instability. The Young Researchers’ Forum which was held at this meeting is also described in this report.

  2. Recurrent Idiopathic Catatonia: Implications beyond the Diagnostic and Statistical Manual of Mental Disorders 5th Edition

    PubMed Central

    Caroff, Stanley N.; Hurford, Irene; Bleier, Henry R.; Gorton, Gregg E.; Campbell, E. Cabrina

    2015-01-01

    We describe a case of recurrent, life-threatening, catatonic stupor, without evidence of any associated medical, toxic or mental disorder. This case provides support for the inclusion of a separate category of “unspecified catatonia” in the Diagnostic and Statistical Manual of Mental Disorders 5th edition (DSM-5) to be used to classify idiopathic cases, which appears to be consistent with Kahlbaum’s concept of catatonia as a distinct disease state. But beyond the limited, cross-sectional, syndromal approach adopted in DSM-5, this case more importantly illustrates the prognostic and therapeutic significance of the longitudinal course of illness in differentiating cases of catatonia, which is better defined in the Wernicke-Kleist-Leonhard classification system. The importance of differentiating cases of catatonia is further supported by the efficacy of antipsychotics in treatment of this case, contrary to conventional guidelines. PMID:26243853

  3. The 5th Symposium on Post-Transcriptional Regulation of Plant Gene Expression (PTRoPGE)

    SciTech Connect

    Karen S. Browning; Marie Petrocek; Bonnie Bartel

    2006-06-01

    The 5th Symposium on Post-Transcriptional Regulation of Plant Gene Expression (PTRoPGE) will be held June 8-12, 2005 at the University of Texas at Austin. Exciting new and ongoing discoveries show significant regulation of gene expression occurs after transcription. These post-transcriptional control events in plants range from subtle regulation of transcribed genes and phosphorylation, to the processes of gene regulation through small RNAs. This meeting will focus on the regulatory role of RNA, from transcription, through translation and finally degradation. The cross-disciplinary design of this meeting is necessary to encourage interactions between researchers that have a common interest in post-transcriptional gene expression in plants. By bringing together a diverse group of plant molecular biologist and biochemists at all careers stages from across the world, this meeting will bring about more rapid progress in understanding how plant genomes work and how genes are finely regulated by post-transcriptional processes to ultimately regulate cells.

  4. Numerical Fluid Dynamics Symposium, 5th, Tokyo, Japan, Dec. 19-21, 1991, Proceedings

    NASA Astrophysics Data System (ADS)

    1991-07-01

    Various papers on numerical fluid dynamics are presented. Individual topics discussed include: numerical analysis (NA) of shock structure problems, CFD development and a future high-speed computer, simulating vortex motion by 3D method, application of CFD to turbomachine design, numerical simulation (NS) of converging shock waves, NS of unsteady 3D shock wave phenomenon, 5th-order accurate compact upwind scheme, development of a multidimensional upwind scheme, fortified solution algorithm, large-eddy simulation of a bound jet, construction of collision model of diatomic molecules, VSL analysis of nonequilibrium flows around a hypersonic body, NA of chemically nonequilibrium flow, topological transition of flow past some axisymmetric bodies, modeling of scalar transport in free turbulence, a contribution to general application of the vortex method. Also addressed are: vortex simulation of artificial control of mixing layers, 3D motion of vortex filaments, Navier-Stokes simulation of 2D mixing layer, active control of vortex shedding frequency by a jet, direct NS of homogeneous turbulent sheer flow, NA of fuel spray jet by Eulerian method, NS of ignition using a premixed pulsed jet, NS of a scram jet combustor flow, numerical simulation of supersonic flow CO chemical laser, adaptive grid generation using optimal control theory, NS of characteristics of the Stalker tube, imcompressible flow solver using velocity vector and a new variable, unsteady analysis of helicopter rotor.

  5. Need for Specific Sugar-Sweetened Beverage Lessons for 4th and 5th Graders

    PubMed Central

    Bea, Jennifer W.; Jacobs, Laurel; Waits, Juanita; Hartz, Vern; Martinez, Stephanie H.; Standfast, Rebecca D.; Farrell, Vanessa A.; Bawden, Margine; Whitmer, Evelyn; Misner, Scottie

    2015-01-01

    Objective Consumption of sugar-sweetened beverages (SSB) is linked to obesity. We hypothesized that school-based nutrition education would decrease SSB consumption. Design Self-selected interventional cohort with random selection for pre and post measurements Setting Arizona SNAP-Ed eligible schools Participants Randomly selected (9%) 4th and 5th grade classroom students Intervention The University of Arizona Nutrition Network (UANN) provided general nutrition education training and materials to teachers, to be delivered to their students. The UANN administered behavioral questionnaires to students in both Fall and Spring. Main Outcome Measure(s) Change in SSB consumption Analyses Descriptive statistics were computed for student demographics and beverage consumption on the day prior to testing. Paired t-tests evaluated change in classroom averages. Linear regression assessed potential correlates of SSB consumption. Results Fall mean SSB consumption was 1.1 (±0.2) times; mean milk and water intake were 1.6 (±0.2) and 5.2 (±0.7) times, respectively. Beverage consumption increased (3.2%) in springtime, with increased SSBs (14.4%) accounting for the majority (p=0.006). Change in SSB consumption was negatively associated with baseline SSB and water consumption, but positively associated with baseline milk fat (p≤0.05). Conclusions and Implications The results suggest the need for beverage specific education to encourage children to consume more healthful beverages in warmer weather. PMID:25239840

  6. Online inspection

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An online line-scan imaging system capable of both hyperspectral and multispectral visible/near-infrared reflectance imaging was developed to inspect freshly slaughtered chickens on a processing line for wholesomeness. In-plant testing results indicated that the imaging inspection system achieved o...

  7. 5th International conference on Physics and Astrophysics of Quark Gluon Plasma

    NASA Astrophysics Data System (ADS)

    Sinha, Bikash; Alam, Jan-E.; Nayak, Tapan K.

    2006-11-01

    The 5th International Conference on Physics and Astrophysics of Quark Gluon Plasma (ICPAQGP 2005) was held on 8 - 12 February 2005 at the Variable Energy Cyclotron Centre and Saha Institute of Nuclear Physics campus, Kolkata, India. The conference was enriched by the august presence of about 300 participants representing 18 countries across the globe. It had plenary talks and oral presentations, which form a part of these proceedings. Besides invited and contributed talks there were also a large number of poster presentations. The conference was energized by discussions of fresh experimental data from RHIC on strong elliptic flow, jet quenching, single photon spectra etc. Moreover, new theoretical results were brought to the discussion forum during this conference. Colour glass condensates, hydrodynamical flow, jet quenching and sQGP were intensely debated by the participants. The highlight of ICPAQGP 2005 was the presentation of fresh experimental results from the RHIC-IV run. The ICPAQGP series, since its inception in 1988, has placed emphasis on the role of quark matter in the fields of astrophysics and cosmology. The subsequent conferences held in 1993, 1997, 2001 and 2005 had also retained this focus. The conference was preceded by a Fest Colloquium in honour of Professor Bikash Sinha. Professor Sinha, regarded as the pioneer in establishing quark gluon plasma research in India, has successfully encouraged a group of young Indian researchers to devote themselves wholeheartedly to QGP research - both theoretical and experimental. Members of the International Advisory Committee played a pivotal role mainly in the selection of speakers. The contributions of the Organizing Committee in all aspects, from selecting the contributory talks posters down to arranging local hospitality, were much appreciated. We thank the members of both committees for making ICPAQGP 2005 an interesting platform for scientific deliberation. The ICPAQGP 2005 was supported financially by

  8. Freezing Rain Diagnostic Study Over Eastern Canada Using the 5th Generation Canadian Regional Climate Model

    NASA Astrophysics Data System (ADS)

    Bresson, É.; Paquin, D.; Laprise, R.; Theriault, J. M.; de Elía, R.

    2015-12-01

    Northeastern North America is often affected by freezing rain events during the cold season. They can have significant consequences (from road accidents, to severe power outages) despite their intensity and duration. The 1998 Ice Storm over Eastern Canada and Northeastern United States is an example of an extreme event with catastrophic consequences. A total of up to 150 mm of ice accumulated during 10 days were observed in some areas. This natural disaster has highlighted the need to better understand how such phenomena will evolve with future climate scenario. The goal is to investigate the feasibility of using regional climate modeling to diagnose the occurrence of freezing rain events over Quebec (Canada). To address this issue, we used the 5th generation of the Canadian Regional Climate Model (CRCM5), from 1979 to 2014. An empirical method (Bourgouin, 2000) developed to determine the type of winter precipitations was chosen to diagnose freezing rain events. The study focused in the Montreal area and the St. Lawrence River Valley (Quebec, Canada). The sensitivity of the model to horizontal resolution was explored by using three resolutions: 0.44°, 0.22° and 0.11°. In general, freezing rain was diagnosed consistently at all resolutions but the higher one (0.11°) produced more realistic results due to a better representation of the orography. Using the higher resolution, the results showed that the climatology of the freezing rain occurrence in the Montreal area is comparable to available observations. It also suggested that the role of the specific orography of the region with the St. Lawrence River Valley can impact the characteristics of freezing rain events in this area. Overall, this study will contribute to a better preparedness for such events in the future. High resolution regional climate simulations are essential to improve the reproduction of local scale orographically-forced phenomena.

  9. Black sea surface temperature anomaly on 5th August 1998 and the ozone layer thickness

    NASA Astrophysics Data System (ADS)

    Manev, A.; Palazov, K.; Raykov, St.; Ivanov, V.

    2003-04-01

    BLACK SEA SURFACE TEMPERATURE ANOMALY ON 5th AUGUST 1998 AND THE OZONE LAYER THICKNESS A. Manev , K. Palazov , St. Raykov, V. Ivanov Solar Terrestrial Influences Laboratory, Bulgarian Academy of Sciences amanev@abv.bg This paper focuses on the peculiarities of the Black Sea surface temperature anomaly on 05.08.1998. Researching the daily temperature changes in a number of control fields in the course of 8-10 years, we have found hidden correlations and anomalous deviations in the sea surface temperatures on a global scale. Research proves the statistical reliability of the temperature anomaly on the entire Black Sea surface registered on 04.-05.08.1998. In the course of six days around these dates the temperatures are up to 2°C higher than the maximum temperatures in this period in the other seven years. A more detailed analysis of the dynamics of the anomaly required the investigation of five Black Sea surface characteristic zones of 75x75 km. The analysis covers the period 20 days - 10 days before and 10 days after the anomaly. Investigations aimed at interpreting the reasons for the anomalous heating of the surface waters. We have tried to analyze the correlation between sea surface temperature and the global ozone above the Black Sea by using simultaneously data from the two satellite systems NOAA and TOMS. Methods of processing and comparing the data from the two satellite systems are described. The correlation coefficients values for the five characteristic zones are very high and close, which proves that the character of the correlation ozone - sea surface temperature is the same for the entire Black Sea surface. Despite the high correlation coefficient, we have proved that causality between the two phenomena at the time of the anomaly does not exit.

  10. Development of a Three-Dimensional Finite Element Chest Model for the 5(th) Percentile Female.

    PubMed

    Kimpara, Hideyuki; Lee, Jong B; Yang, King H; King, Albert I; Iwamoto, Masami; Watanabe, Isao; Miki, Kazuo

    2005-11-01

    Several three-dimensional (3D) finite element (FE) models of the human body have been developed to elucidate injury mechanisms due to automotive crashes. However, these models are mainly focused on 50(th) percentile male. As a first step towards a better understanding of injury biomechanics in the small female, a 3D FE model of a 5(th) percentile female human chest (FEM-5F) has been developed and validated against experimental data obtained from two sets of frontal impact, one set of lateral impact, two sets of oblique impact and a series of ballistic impacts. Two previous FE models, a small female Total HUman Model for Safety (THUMS-AF05) occupant version 1.0Beta (Kimpara et al. 2002) and the Wayne State University Human Thoracic Model (WSUHTM, Wang 1995 and Shah et al. 2001) were integrated and modified for this model development. The model incorporated not only geometrical gender differences, such as location of the internal organs and structure of the bony skeleton, but also the biomechanical differences of the ribs due to gender. It includes a detailed description of the sternum, ribs, costal cartilage, thoracic spine, skin, superficial muscles, intercostal muscles, heart, lung, diaphragm, major blood vessels and simplified abdominal internal organs and has been validated against a series of six cadaveric experiments on the small female reported by Nahum et al. (1970), Kroell et al. (1974), Viano (1989), Talantikite et al. (1998) and Wilhelm (2003). Results predicted by the model were well-matched to these experimental data for a range of impact speeds and impactor masses. More research is needed in order to increase the accuracy of predicting rib fractures so that the mechanisms responsible for small female injury can be more clearly defined. PMID:17096277

  11. Patterns of Irregular Burials in Western Europe (1st-5th Century A.D.)

    PubMed Central

    Milella, Marco; Mariotti, Valentina; Belcastro, Maria Giovanna; Knüsel, Christopher J.

    2015-01-01

    Background Irregular burials (IB—burials showing features that contrast with the majority of others in their geographic and chronological context) have been the focus of archaeological study because of their relative rarity and enigmatic appearance. Interpretations of IB often refer to supposed fear of the dead or to social processes taking place in time-specific contexts. However, a comprehensive and quantitative analysis of IB for various geographical contexts is still lacking, a fact that hampers any discussion of these burials on a larger scale. Methods Here, we collected a bibliographic dataset of 375 IB from both Britain and Continental Europe, altogether spanning a time period from the 1st to the 5th century AD. Each burial has been coded according to ten dichotomous variables, further analyzed by means of chi-squared tests on absolute frequencies, non-metric multidimensional scaling, and cluster analysis. Results Even acknowledging the limits of this study, and in particular the bias represented by the available literature, our results point to interesting patterns. Geographically, IB show a contrast between Britain and Continental Europe, possibly related to historical processes specific to these regions. Different types of IB (especially prone depositions and depositions with the cephalic extremity displaced) present a series of characteristics and associations between features that permit a more detailed conceptualization of these occurrences from a socio-cultural perspective that aids to elucidate their funerary meaning. Conclusions and Significance Altogether, the present work stresses the variability of IB, and the need to contextualize them in a proper archaeological and historical context. It contributes to the discussion of IB by providing a specific geographic and chronological frame of reference that supports a series of hypotheses about the cultural processes possibly underlying their occurrence. PMID:26115408

  12. WWW.com: A Brief Intervention to Bolster a 5th Grader's Regrouping Skills in Math

    ERIC Educational Resources Information Center

    Waugh, Matthew; Harrison, Gina L.

    2014-01-01

    This study examined the efficacy of a brief math intervention using cognitive behaviour instruction (CBI) supplemented by a mnemonic cue system for a 5th grade student with math computation and fluency difficulties. Regrouping operations in addition and subtraction were the targeted skills. Curriculum-based measurements were conducted at the end…

  13. Proceedings of the International Conference on Educational Data Mining (EDM) (5th, Chania, Greece, June 19-21, 2012)

    ERIC Educational Resources Information Center

    International Educational Data Mining Society, 2012

    2012-01-01

    The 5th International Conference on Educational Data Mining (EDM 2012) is held in picturesque Chania on the beautiful Crete island in Greece, under the auspices of the International Educational Data Mining Society (IEDMS). The EDM 2012 conference is a leading international forum for high quality research that mines large data sets of educational…

  14. Comparing Science Learning among 4th-, 5th-, and 6th-Grade Students: STS versus Textbook-Based Instruction

    ERIC Educational Resources Information Center

    Yager, Robert E.; Choi, AeRan; Yager, Stuart O.; Akcay, Hakan

    2009-01-01

    Fifteen 4th-, 5th-, and 6th-grade teachers from five school districts each taught two sections of science--one with a Science-Technology-Society (STS) approach and the other with a more traditional textbook approach in which basic science concepts were the major organizers. Local, current, and personally relevant issues provided the context and…

  15. Process Evaluation of "Learn Young, Learn Fair": A Stress Management Programme for 5th and 6th Graders

    ERIC Educational Resources Information Center

    Kraag, Gerda; Van Breukelen, Gerard; Lamberts, Petra; Vugts, Odette; Kok, Gerjo; Fekkes, Minne; Abu-Saad, Huda Huijer

    2007-01-01

    This article describes the process evaluation of a stress management program called "Learn Young, Learn Fair" for 5th and 6th graders. Studies, reviews and meta-analyses of prevention programs report that a common limitation in studies is the restricted documentation of process factors that contribute to the success of interventions. Program…

  16. Communicating Science to Impact Learning? A Phenomenological Inquiry into 4th and 5th Graders' Perceptions of Science Information Sources

    ERIC Educational Resources Information Center

    Gelmez Burakgazi, Sevinc; Yildirim, Ali; Weeth Feinstein, Noah

    2016-01-01

    Rooted in science education and science communication studies, this study examines 4th and 5th grade students' perceptions of science information sources (SIS) and their use in communicating science to students. It combines situated learning theory with uses and gratifications theory in a qualitative phenomenological analysis. Data were gathered…

  17. From Cooks to Carpenters: Measuring - A Saleable Work Skill. Occupation Simulation Packet. Grades 5th-6th.

    ERIC Educational Resources Information Center

    Kennedy, Helena

    This teacher's guide contains simulated work experiences for 5th and 6th grade students using the isolated skill concept - measuring. Teacher instructions include objectives, evaluation, and sequence of activities. The guide contains pre-tests and post-tests with instructions and answer keys. Three pre-skill activities are suggested, such as…

  18. Brief Report: Data on the Stanford-Binet Intelligence Scales (5th Ed.) in Children with Autism Spectrum Disorder

    ERIC Educational Resources Information Center

    Coolican, Jamesie; Bryson, Susan E.; Zwaigenbaum, Lonnie

    2008-01-01

    The Fifth Edition of the Stanford-Binet Intelligence Scales (SB5; Roid, G. H. (2003). "Stanford Binet intelligence scales" (5th ed.). Itasca, IL: Riverside Publishing) is relatively new, with minimal published research on general populations and none with special populations. The present study provides information on the cognitive profiles of…

  19. Health in the 5th 5-years Development Plan of Iran: Main Challenges, General Policies and Strategies.

    PubMed

    Vosoogh Moghaddam, A; Damari, B; Alikhani, S; Salarianzedeh, Mh; Rostamigooran, N; Delavari, A; Larijani, B

    2013-01-01

    Access to the right to the highest attainable level of health is a constitutional right that obliges governments and other players to take step to increase all individuals' chances of obtaining good health. At the least, health and education are two crucial requirements for this as well. Iran's vision 2025 is going to lead the country to a developed state with the highest rank of economic, scientific and technological status in the region. Enjoying health, welfare, food security, social security, equal opportunities, etc, are also considered as part of characteristics of Iranian society in 2025. Although health system of Iran has many achievements in providing health services specially for the poor following the Islamic Revolution of 1979, but the evidences gathered to develop the 5(th) 5-years economical, social and cultural plan (5(th)5YDP:2011-2015), listed a variety of main challenges in stewardship, financing, resources generation and service provision functions of the existing health system. Thus, to overcome the main challenges, about 11% of general policies of 5(th)5YDP are directly address health related issues with emphasizing on healthy human and comprehensive health approach with considering: Integration of policy making, planning, evaluation, supervision and public financing; Developing both quantity and quality of health insurance system and reducing out-of-pocket expenditures for health services to 30% by the end of the 5th plan. The strategies of 5(th)5YDP adopted by the parliament as an Act will change the health system fundamentally through tuning the main drivers; so, its implementation needs brave leaders, capable managers, motivated technical staff and social mobilization. PMID:23865015

  20. FOREWORD: 5th International Workshop on New Computational Methods for Inverse Problems

    NASA Astrophysics Data System (ADS)

    Vourc'h, Eric; Rodet, Thomas

    2015-11-01

    This volume of Journal of Physics: Conference Series is dedicated to the scientific research presented during the 5th International Workshop on New Computational Methods for Inverse Problems, NCMIP 2015 (http://complement.farman.ens-cachan.fr/NCMIP_2015.html). This workshop took place at Ecole Normale Supérieure de Cachan, on May 29, 2015. The prior editions of NCMIP also took place in Cachan, France, firstly within the scope of ValueTools Conference, in May 2011, and secondly at the initiative of Institut Farman, in May 2012, May 2013 and May 2014. The New Computational Methods for Inverse Problems (NCMIP) workshop focused on recent advances in the resolution of inverse problems. Indeed, inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finances. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational aspects of inversion, Bayesian estimation, Kernel methods, learning methods

  1. News from the "5th International Meeting on Inflammatory Bowel Diseases" CAPRI 2010.

    PubMed

    Latella, Giovanni; Fiocchi, Claudio; Caprili, Renzo

    2010-12-01

    At the "5th International Meeting on Inflammatory Bowel Diseases selected topics of inflammatory bowel disease (IBD), including the environment, genetics, the gut flora, the cell response and immunomodulation were discussed in order to better understand specific clinical and therapeutic aspects. The incidence of IBD continues to rise, both in low and in high-incidence areas. It is believed that factors associated with 'Westernization' may be conditioning the expression of these disorders. The increased incidence of IBD among migrants from low-incidence to high-incidence areas within the same generation suggests a strong environmental influence. The development of genome-wide association scanning (GWAS) technologies has lead to the discovery of more than 100 IBD loci. Some, as the Th 17 pathway genes, are shared between Crohn's disease (CD) and ulcerative colitis (UC), while other are IBD subtype-specific (autophagy genes, epithelial barrier genes). Disease-specific therapies targeting these pathways should be developed. Epigenetic regulation of the inflammatory response also appears to play an important role in the pathogenesis of IBD. The importance of gut flora in intestinal homeostasis and inflammation was reinforced, the concepts of eubiosis and dysbiosis were introduced, and some strategies for reverting dysbiosis to a homeostatic state of eubiosis were proposed. The current status of studies on the human gut microbiota metagenome, metaprotome, and metabolome was also presented. The cell response in inflammation, including endoplasmic reticulum (ER) stress responses, autophagy and inflammasome-dependent events were related to IBD pathogenesis. It was suggested that inflammation-associated ER stress responses may be a common trait in the pathogenesis of various chronic immune and metabolic diseases. How innate and adaptive immunity signaling events can perpetuate chronic inflammation was discussed extensively. Signal transduction pathways provide intracellular

  2. Storm Peak Laboratory 5th-6th Grade Climate and Weather Program

    NASA Astrophysics Data System (ADS)

    McCubbin, I. B.; Hallar, A. G.

    2008-12-01

    science. At the end of the day each student has a data sheet with measurements recorded from 5 locations of different elevations to take back to the classroom. Following the field trip, SPL scientists and educators visit the school for a follow-up to help children grasp concepts, represent their data set collected in graphical formats, answer questions, and evaluate students" learning. Currently, approximately 250 students annually participate in the SPL 5th and 6th grade climate education program.

  3. PREFACE: 5th DAE-BRNS Workshop on Hadron Physics (Hadron 2011)

    NASA Astrophysics Data System (ADS)

    Jyoti Roy, Bidyut; Chatterjee, A.; Kailas, S.

    2012-07-01

    The 5th DAE-BRNS Workshop on Hadron Physics was held at the Bhabha Atomic Research Centre (BARC), Mumbai from 31 October to 4 November 2011. This workshop series, supported by the Board of Research in Nuclear Sciences, Department of Atomic Energy (BRNS, DAE), Govt. of India, began ten years ago with the first one being held at BARC, Mumbai in October 2002. The second one was held at Puri in 2005, organized jointly by Institute of Physics, Bhubneswar and Saha Institute of Nuclear Physics, Kolkata. The 3rd and 4th ones took place, respectively, at Shantineketan in 2006, organized by Visva Bharati University, and at Aligarh in 2008, organized by Aligarh Muslim University, Aligarh. The aim of the present workshop was to bring together the experts and young researchers in the field of hadron physics (both experiment and theory) and to have in-depth discussions on the current research activities in this field. The format of the workshop was: a series of review lectures by various experts from India and abroad, the presentation of advanced research results by researchers in the field, and a review of major experimental programs being planned and pursued in major laboratories in the field of hadron physics, with the aim of providing a platform for the young participants for interaction with their peers. The upcoming international FAIR facility at GSI is a unique future facility for studies of hadron physics in the charm sector and hyper nuclear physics. The Indian hadron physics community is involved in this mega science project and is working with the PANDA collaboration on the development of detectors, simulation and software tools for the hadron physics programme with antiprotons at FAIR. A one-day discussion session was held at this workshop to discuss India-PANDA activities, the current collaboration status and the work plan. This volume presents the workshop proceedings consisting of lectures and seminars which were delivered during the workshop. We are thankful to

  4. EDITORIAL: 5th International Symposium on Particle Image Velocimetry, PIV'03

    NASA Astrophysics Data System (ADS)

    Sung, Hyung Jin; Kim, Kyung Chun; Lee, Sang Joon

    2004-06-01

    The advent of particle image velocimetry (PIV) in the late 20th century brought about a paradigm change in the technique of flow field measurement, from point measurement to field measurement. This revolution is a result of the recent advances in computers, video cameras, optics and lasers and a deeper understanding of the theory of image processing, and such advances continue by keeping pace with leading-edge technologies such as biotechnology, nanotechnology and so forth. Recently, the PIV technique has been extended in new directions such as stereoscopic PIV, holographic PIV, dynamic PIV, micro PIV and simultaneous PLIF/PIV techniques. This special issue contains research dealing with many of the most recent developments in PIV. The papers were selected from more than 120 papers presented at the 5th International Symposium on Particle Image Velocimetry (PIV'03) held in Busan, Korea, during 22-24 September 2003. Special thanks are due to the invited speakers who have contributed their original work to this special issue, which will enhance the academic reputation of Measurement Science and Technology (MST). Fourteen papers were selected by the Scientific Committee of PIV'03. After the standard refereeing process of MST, nine papers were finally accepted for publication. The selected papers can be categorized into three groups: new PIV algorithms and evaluation methods, three-dimensional velocity field measurement techniques and micro/bio PIV applications. As a new PIV technique, Lecuona et al introduced PIV evaluation algorithms for industrial applications having high shear flow structures. Billy et al used a single-pixel-based cross-correlation method for measuring flow inside a microchannel. Foucaut et al carried out PIV optimization using spectral analysis for the study of turbulent flows. Doh et al applied a 3D PTV method to the wake behind a sphere using three CCD cameras. Hori and Sakakibara developed a high-speed scanning stereoscopic PIV system and

  5. The 5th Conference on Asian Trends in Prostate Cancer Hormone Therapy.

    PubMed

    Akaza, Hideyuki; Moore, Malcolm A; Chang, Shu-Jen; Cheng, Christopher; Choi, Han Yong; Esuvaranathan, Kesavan; Hinotsu, Shiro; Hong, Sung-Joon; Kim, Choung-Soo; Kim, Wun-Jae; Murai, Masaru; Naito, Seiji; Soebadi, Doddy; Song, Jae-Mann; Umbas, Rainy; Usami, Michiyuki; Xia, Shujie; Yang, Chi-Rei

    2007-01-01

    The Conference on Asian Trends in Prostate Cancer Hormone Therapy is an annual forum for Asian urologists now in its 5th year. The 2006 conference, held in Bali, Indonesia, was attended by 27 leading urologic oncologists from China, Indonesia, Japan, Korea, Singapore, and Taiwan and featured a packed program of presentations and discussions on a wide range of topics such as relationships among clinicians and the newly opened Asia Regional Office for Cancer Control of the International Union Against Cancer (UICC), detection rates of prostate cancer by biopsy in each of the 6 Asian countries, and favored treatment modalities for hormone-refractory prostate cancer (HRPC) in each country. The first session of the conference kicked off with a keynote lecture entitled "Activities of the UICC ARO". UICC's new office will be the nerve center for its activities in the Asia region. Along with the Asian Pacific Organization for Cancer Prevention (APOCP), UICC aims to shift the focus of attention to cancer control. As such APOCP's long-running publication the APJCP is to be re-launched as the Asian Pacific Journal of Cancer Control. Although UICC is primarily concerned with cancer, several risk factors for cancer are common also to other non-communicable diseases such as diabetes and heart disease, and an important strategy is to implement measures to control these various pathologic conditions as a whole. Apart from contributing to an Asian prostate cancer registry the UICC-ARO will provide training courses, working groups, and assistance in collecting and processing data. The keynote lecture was followed by a roundtable discussion on possible ways in which clinicians from each Asian country can work with UICC. A number of suggestions were put forth including better registration, epidemiology research, possible implementation of UICC prostate cancer guidelines, early detection and screening, and roles of diet and phytotherapy. The underlying reasons for the large but

  6. PREFACE: 5th International Workshop on Top Quark Physics (TOP2012)

    NASA Astrophysics Data System (ADS)

    Salamanna, G.; Boisvert, V.; Cerrito, L.; Khan, A.; Moretti, S.; Owen, M.; Schwanenberger, C.

    2013-07-01

    The 5th International Workshop on Top Quark Physics (TOP 2012) took place in Winchester, UK, from the 16-21 September. It gathered students as well as people active in the top quark sector and provided a framework to highlight the newest results and matters related to top quark physics. Discovered in 1995, the top quark is the sixth and heaviest of all quarks, and it is the only one with a lifetime short enough to be observed 'naked'. This makes it an important testing ground in the search for new physics. In fact, the fact of its mass being so much larger than the other quarks, hints at its special role in the Higgs mechanism. For the same reason, in many models of New Physics, new heavy resonances are expected to couple mostly with top quarks. Even if no new particles are observed, the direct correlation between its angular momentum and that of its detectable decay products allows us to probe indirectly New Physics in action when top quarks are created. In this edition of the TOP conference series, for the first time, the agenda was equally balanced between 'traditional' measurements and the now vast number of searches for physics BSM in the top quark sector, thanks mostly to the amount of data collected at the LHC in its Run I. New results were presented by both the Tevatron and the LHC collaborations: improved ttbar and single top cross-section measurements, refined techniques to measure the top quark mass and a large number of results on properties such as spin correlation and W boson polarization in top quark decays were shown. More technical discussions on the experimental issues, both from the detector and the simulation side also took place, drawing together experimentalists and theorists. Reviews of the latest results on ttbar asymmetry both from CDF and D0 and from ATLAS and CMS were shown, and theorists active in the field made some interesting points on this hot topic. Additionally, results on the search for fourth generation fermions and new

  7. PREFACE: The 5th International Conference on Radiotherapy Gel Dosimetry (DOSGEL 2008)

    NASA Astrophysics Data System (ADS)

    Maris, Thomas G.; Pappas, Evangelos

    2009-07-01

    The International Conference on Radiotherapy Gel Dosimetry (DOSGEL) is held every two years. Its purpose is to bring together basic science and clinical researchers, medical physicists and clinicians from around the world to discuss the state-of-the-art of the gel dosimetry technique and to set the directions and trends for its future improvements. Gel dosimetry can be broadly defined as using a gel that can react to the absorption of ionizing radiation, and that can retain this information which can subsequently be retrieved by an external imaging modality. Examples of radiation-sensitive gels include, but are not limited to, polymer gel dosimeters, Fricke gel dosimeters and others. Imaging modalities that are of general use in this field are (in alphabetical order) magnetic resonance imaging (MRI), optical light computed tomography and x-ray computed tomography. This volume comprises the proceedings of the 5th International Conference on Radiotherapy Gel Dosimetry (DOSGEL 2008). The conference, organised by the University of Crete, Medical Physics Department, took place in Hersonissos, Crete, Greece from 29 September to 3 October 2008. The meeting aimed to continue the series of biannual DOSGEL conferences and focused on the promotion of gel dosimetry techniques by setting the trends for their future improvements. The main scientific session topics of DOSGEL 2008 were the following: Chemistry and fundamental properties of polymer gel dosimeters Gel dosimetry with Optical Computed Tomography Gel dosimetry with Magnetic Resonance Imaging Gel dosimetry with other than Optical CT and MR scan Techniques Other 3D dosimeters Gel dosimetry applications Local Organizing Committee Thomas G Maris (University of Crete, Greece, Chairman DOSGEL 2008) John Damilakis (University of Crete, Greece) Evangelos Pappas (University of Crete, Greece) Antonios Papadakis (University of Crete, Greece) Fotini Zacharopoulou (University of Crete, Greece) John Stratakis (University of Crete

  8. Chinese Children's Statistical Learning of Orthographic Regularities: Positional Constraints and Character Structure

    ERIC Educational Resources Information Center

    Tong, Xiuli; McBride, Catherine

    2014-01-01

    This study examined how Chinese children acquire the untaught positional constraints of stroke patterns that are embedded in left-right structured and top-bottom structured characters. Using an orthographic regularity pattern elicitation paradigm, 536 Hong Kong Chinese children at different levels of reading (kindergarten, 2nd, and 5th grades)…

  9. Socioeconomic assessment of the proposed inactivation of the 5th Fighter Interceptor Squadron Minot Air Force Base, North Dakota

    SciTech Connect

    Kerley, C.R.; Sage, P.L.; Fichera, J.P.; Lufkin, P.; Stadelman, D.

    1988-12-01

    This assessment examines the potential socioeconomic impacts of inactivating the 5th Fighter Interceptor Squadron (FIS) at Minot Air Force Base (AFB), North Dakota. The study focuses on employment, population, and income impacts and estimates their effects on housing, community services, utilities, transportation, recreation and tourism, and public finance. This assessment is intended primarily for the use of Air Force and community planners concerned with the local consequences of the inactivation. 10 refs., 46 tabs.

  10. Summative assessment of 5th year medical students’ clinical reasoning by script concordance test: requirements and challenges

    PubMed Central

    2012-01-01

    Background The Script Concordance Test (SCT) has not been reported in summative assessment of students across the multiple domains of a medical curriculum. We report the steps used to build a test for summative assessment in a medical curriculum. Methods A 51 case, 158-question, multidisciplinary paper was constructed to assess clinical reasoning in 5th-year. 10–16 experts in each of 7 discipline-based reference panels answered questions on-line. A multidisciplinary group considered reference panel data and data from a volunteer group of 6th Years, who sat the same test, to determine the passing score for the 5th Years. Results The mean (SD) scores were 63.6 (7.6) and 68.6 (4.8) for the 6th Year (n = 23, alpha = 0.78) and and 5th Year (n = 132, alpha =0.62) groups (p < 0.05), respectively. The passing score was set at 4 SD from the expert mean. Four students failed. Conclusions The SCT may be a useful method to assess clinical reasoning in medical students in multidisciplinary summative assessments. Substantial investment in training of faculty and students and in the development of questions is required. PMID:22571351

  11. Emotional and Behavioral Disorders in 1.5th Generation, 2nd Generation Immigrant Children, and Foreign Adoptees.

    PubMed

    Tan, Tony Xing

    2016-10-01

    Existing theories (e.g., acculturative stress theory) cannot adequately explain why mental disorders in immigrants are less prevalent than in non-immigrants. In this paper, the culture-gene co-evolutionary theory of mental disorders was utilized to generate a novel hypothesis that connection to heritage culture reduces the risk for mental disorders in immigrant children. Four groups of children aged 2-17 years were identified from the 2007 United States National Survey of Children's Health: 1.5th generation immigrant children (n = 1378), 2nd generation immigrant children (n = 4194), foreign adoptees (n = 270), and non-immigrant children (n = 54,877). The 1.5th generation immigrant children's connection to their heritage culture is stronger than or similar to the 2nd generation immigrants, while the foreign adoptees have little connection to their birth culture. Controlling for age, sex, family type and SES, the odds for having ADD/ADHD, Conduct Disorder, Anxiety Disorder, and Depression diagnosis were the lowest for the 1.5th generation immigrant children, followed by the 2nd generation immigrant children and the foreign adoptees. The foreign adoptees and non-adopted children were similar in the odds of having these disorders. Connection to heritage culture might be the underlying mechanism that explained recent immigrants' lower rates of mental disorders. PMID:26972324

  12. Ultrasonic Inspection

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Automation Industries Inc. has had more than $2 million in contracts to produce innovative equipment for the Apollo program. When Marshall Space Flight Center sought a fast nondestructive way to inspect butt welds in aluminum alloys for spacecraft, the company developed a reliable ultrasonic device using multiple transducers called "delta manipulators" which detect lack of weld penetration not readily seen in radiograph automation. Industry soon adapted the ultrasonic equipment to a unique rail inspection device that saves countless man hours. Device is contained in self propelled railroad cars produced and operated by the company to check old track welds for deterioration.

  13. PREFACE: The 5th International Symposium in Quantum Theory and Symmetries (QTS5)

    NASA Astrophysics Data System (ADS)

    Arratia, O.; Calzada, J. A.; Gómez-Cubillo, F.; Negro, J.; del Olmo, M. A.

    2008-02-01

    This volume of Journal of Physics: Conference Series contains the Proceedings of the 5th International Symposium in Quantum Theory and Symmetries (QTS5), held in Valladolid, Spain, 22-28 July 2007. This is the fifth of a series of conferences previously held in Goslar (Germany) 1999, QTS1; Cracow (Poland) 2001, QTS2; Cincinnati (USA) 2003, QTS3, and Varna (Bulgaria) 2005, QTS4. The QTS5 symposium gathered 181 participants from 39 countries working in different fields on Theoretical Physics. The spirit of the QTS conference series is to join researchers in a wide variety of topics in Theoretical Physics, as a way to make accessible recent results and the new lines of different fields. The QTS5 conference offered the following list of topics: Symmetries in String Theory, Quantum Gravity and related Symmetries in Quantum Field Theories, Conformal and Related Field Theories, Lattice and Noncommutative Theories, Gauge Theories Quantum Computing, Information and Control Foundations of Quantum Theory Quantum Optics, Coherent States, Wigner Functions Dynamical and Integrable Systems Symmetries in Condensed Matter and Statistical Physics Symmetries in Particle Physics, Nuclear, Atomic and Molecular Nonlinear Quantum Mechanics Time Asymmetric Quantum Mechanics SUSY Quantum Mechanics, PT symmetries and pseudo-Hamiltonians Mathematical Methods for Symmetries and Quantum Theories Symmetries in Chemistry Biology and other Sciences Papers accepted for publication in the present issue are based on the contributions from the participants in the QTS5 conference after a peer review process. In addition, a special issue of Journal Physics A: Mathematical and Theoretical contains contributions from plenary speakers, some participants as well as contributions from other authors whose works fit into the topics of the conference. The organization of the conference had the following pattern. In the morning there were five plenary or general sessions for all the participants, which aimed to

  14. PREFACE: The 5th International Symposium on Quantum Theory and Symmetries (QTS5)

    NASA Astrophysics Data System (ADS)

    Gadella, M.; Izquierdo, J. M.; Kuru, S.; Negro, J.; del Olmo, M. A.

    2008-08-01

    This special issue of Journal of Physics A: Mathematical and Theoretical appears on the occasion of the 5th International Symposium on Quantum Theory and Symmetries (QTS5), held in Valladolid, Spain, from 22-28 July 2007. This is the fith in a series of conferences previously held in Goslar (Germany) 1999, QTS1; Cracow (Poland) 2001, QTS2; Cincinnati (USA) 2003, QTS3; and Varna (Bulgaria) 2005, QTS4. The QTS5 symposium gathered 181 participants from 39 countries working in different fields of theoretical physics. The spirit of the QTS conference series is to join researchers in a wide variety of topics in theoretical physics, as a way of making accessible recent results and the new lines of different fields. This is based on the feeling that it is good for a physicist to have a general overview as well as expertise in his/her own field. There are many other conferences devoted to specific topics, which are of interest to gain deeper insight in many technical aspects and that are quite suitable for discussions due to their small size. However, we believe that general conferences like this are interesting and worth keeping. We like the talks, in both plenary and parallel sessions, which are devoted to specific topics, to be prepared so as to be accessible to any researcher in any branch of theoretical physics. We think that this objective is compatible with rigour and high standards. As is well known, similar methods and techniques can be useful for many problems in different fields. We hope that this has been appreciated during the sessions of the QTS5 conference. The QTS5 conference offered the following list of topics: 1. Symmetries in string theory, quantum gravity and related topics 2. Symmetries in quantum field theories, conformal and related field theories, lattice and noncommutative theories, gauge theories 3.Quantum computing, information and control 4. Foundations of quantum theory 5. Quantum optics, coherent states, Wigner functions 6. Dynamical and

  15. PREFACE: The 5th International Symposium in Quantum Theory and Symmetries (QTS5)

    NASA Astrophysics Data System (ADS)

    Arratia, O.; Calzada, J. A.; Gómez-Cubillo, F.; Negro, J.; del Olmo, M. A.

    2008-02-01

    This volume of Journal of Physics: Conference Series contains the Proceedings of the 5th International Symposium in Quantum Theory and Symmetries (QTS5), held in Valladolid, Spain, 22-28 July 2007. This is the fifth of a series of conferences previously held in Goslar (Germany) 1999, QTS1; Cracow (Poland) 2001, QTS2; Cincinnati (USA) 2003, QTS3, and Varna (Bulgaria) 2005, QTS4. The QTS5 symposium gathered 181 participants from 39 countries working in different fields on Theoretical Physics. The spirit of the QTS conference series is to join researchers in a wide variety of topics in Theoretical Physics, as a way to make accessible recent results and the new lines of different fields. The QTS5 conference offered the following list of topics: Symmetries in String Theory, Quantum Gravity and related Symmetries in Quantum Field Theories, Conformal and Related Field Theories, Lattice and Noncommutative Theories, Gauge Theories Quantum Computing, Information and Control Foundations of Quantum Theory Quantum Optics, Coherent States, Wigner Functions Dynamical and Integrable Systems Symmetries in Condensed Matter and Statistical Physics Symmetries in Particle Physics, Nuclear, Atomic and Molecular Nonlinear Quantum Mechanics Time Asymmetric Quantum Mechanics SUSY Quantum Mechanics, PT symmetries and pseudo-Hamiltonians Mathematical Methods for Symmetries and Quantum Theories Symmetries in Chemistry Biology and other Sciences Papers accepted for publication in the present issue are based on the contributions from the participants in the QTS5 conference after a peer review process. In addition, a special issue of Journal Physics A: Mathematical and Theoretical contains contributions from plenary speakers, some participants as well as contributions from other authors whose works fit into the topics of the conference. The organization of the conference had the following pattern. In the morning there were five plenary or general sessions for all the participants, which aimed to

  16. Teacher and Parent Views on the Instruction of 5th Grade Students by Branch Teachers in the 4+4+4 Education System

    ERIC Educational Resources Information Center

    Yildizhan, Yusuf Hayri

    2015-01-01

    The objective of this study is to examine the teacher and parent views on the instruction of 5th grade students by branch teachers. This study is designed according to the phenomenology design and uses qualitative data. In order to collect data, open-ended questions were asked to 18 teachers and 16 parents of 5th grade students on the subject, and…

  17. Regular FPGA based on regular fabric

    NASA Astrophysics Data System (ADS)

    Xun, Chen; Jianwen, Zhu; Minxuan, Zhang

    2011-08-01

    In the sub-wavelength regime, design for manufacturability (DFM) becomes increasingly important for field programmable gate arrays (FPGAs). In this paper, an automated tile generation flow targeting micro-regular fabric is reported. Using a publicly accessible, well-documented academic FPGA as a case study, we found that compared to the tile generators previously reported, our generated micro-regular tile incurs less than 10% area overhead, which could be potentially recovered by process window optimization, thanks to its superior printability. In addition, we demonstrate that on 45 nm technology, the generated FPGA tile reduces lithography induced process variation by 33%, and reduce probability of failure by 21.2%. If a further overhead of 10% area can be recovered by enhanced resolution, we can achieve the variation reduction of 93.8% and reduce the probability of failure by 16.2%.

  18. 5-Step Methodology for Evaluation and Adaptation of Print Patient Health Information to Meet the <5th Grade Readability Criterion

    PubMed Central

    Hill-Briggs, Felicia; Schumann, Kristina P.; Dike, Ogechi

    2012-01-01

    Background In the setting of declining U.S. literacy, new policies include use of clear communication and low literacy accessibility practices with all patients. Reliable methods for adapting health information to meet such criteria remain a pressing need. Objectives To report method validation (Study 1) and method replication (Study 2) procedures and outcomes for a 5-step method for evaluating and adapting print health information to meet the current low literacy criterion of <5th grade readability. Materials Sets of 18 and 11 publicly-disseminated patient education documents developed by a university-affiliated medical center. Measures Three low-literacy criteria were strategically targeted for efficient, systematic evaluation and text modification to meet a <5th grade reading level: sentence length <15 words, writing in active voice, and use of common words with multisyllabic words (>2–3 syllables) minimized or avoided. Inter-rater reliability for the document evaluations was determined. Results Training in the methodology resulted in inter-rater reliability of 0.99–1.00 in Study 1 and 0.98–1.00 in Study 2. Original documents met none of the targeted low literacy criteria. In Study 1, following low-literacy adaptation, mean reading grade level decreased from 10.4±1.8 to 3.8±0.6 (p<0.0001), with consistent achievement of criteria for words per sentence, passive voice, and syllables per word. Study 2 demonstrated similar achievement of all target criteria, with a resulting decrease in mean reading grade level from 11.0±1.8 to 4.6±0.3 (p < 0.0001). Conclusions The 5-step methodology proved teachable and efficient. Targeting a limited set of modifiable criteria was effective and reliable in achieving <5th grade readability. PMID:22354210

  19. Validation of the 5th and 95th Percentile Hybrid III Anthropomorphic Test Device Finite Element Model

    NASA Technical Reports Server (NTRS)

    Lawrence, C.; Somers, J. T.; Baldwin, M. A.; Wells, J. A.; Newby, N.; Currie, N. J.

    2014-01-01

    NASA spacecraft design requirements for occupant protection are a combination of the Brinkley criteria and injury metrics extracted from anthropomorphic test devices (ATD's). For the ATD injury metrics, the requirements specify the use of the 5th percentile female Hybrid III and the 95th percentile male Hybrid III. Furthermore, each of these ATD's is required to be fitted with an articulating pelvis and a straight spine. The articulating pelvis is necessary for the ATD to fit into spacecraft seats, while the straight spine is required as injury metrics for vertical accelerations are better defined for this configuration. The requirements require that physical testing be performed with both ATD's to demonstrate compliance. Before compliance testing can be conducted, extensive modeling and simulation are required to determine appropriate test conditions, simulate conditions not feasible for testing, and assess design features to better ensure compliance testing is successful. While finite element (FE) models are currently available for many of the physical ATD's, currently there are no complete models for either the 5th percentile female or the 95th percentile male Hybrid III with a straight spine and articulating pelvis. The purpose of this work is to assess the accuracy of the existing Livermore Software Technology Corporation's FE models of the 5th and 95th percentile ATD's. To perform this assessment, a series of tests will be performed at Wright Patterson Air Force Research Lab using their horizontal impact accelerator sled test facility. The ATD's will be placed in the Orion seat with a modified-advanced-crew-escape-system (MACES) pressure suit and helmet, and driven with loadings similar to what is expected for the actual Orion vehicle during landing, launch abort, and chute deployment. Test data will be compared to analytical predictions and modelling uncertainty factors will be determined for each injury metric. Additionally, the test data will be used to

  20. It takes a community to define a discipline: the 5th anniversary of Environmental Research Letters It takes a community to define a discipline: the 5th anniversary of Environmental Research Letters

    NASA Astrophysics Data System (ADS)

    Kammen, Dan

    2012-03-01

    commentary environment, a unique service in itself, and also a specific forum for research published in ERL. Individual topics often come up that warrant not only single articles, but collections of assessments, and ERL has published focus issues in key areas of environmental science including: tropical deforestation, wind energy, the Deepwater Horizon oil spill and climate engineering. ERL is currently publishing seven high-quality focus issues in cutting-edge areas such as arctic vegetation dynamics and cryospheric changes. Research letters appearing in ERL have received regular and significant coverage in the wider media, with several major news outlets and agencies choosing to cover ERL research, such as Nature, BBC News, New Scientist, The Guardian, Scientific American, Le Monde and many others. 4.The future community of ERL The process of community support will take many forms at ERL. The journal is growing—we have published the highest number of articles ever in a single volume in 2011 and are looking to continue this growth through into 2012. ERL had an over 50% increase in submissions from 2010 to 2011. One initiative to mark the journal's 5th anniversary was the 'Best articles' collection [1] a nominated compilation of articles showcasing the quality of published work in ERL as well as the subject area breadth. Co-authors of the five winning articles have been awarded free publication in ERL until the end of 2012. We can also see the open access model working, in that our articles are highly downloaded outside of the traditionally strong geographical areas of academia (North America and Western Europe), showing that the journal's readership is geographically diverse with high interest from Asia, South America and Africa. The journal is committed to progress and innovation; coming soon will be a set of new communication tools and online innovations, including: Video abstracts from the start of 2012 (for example, the video commentary published alongside this

  1. A report on 5th congress of Asia Pacific Pediatric Cardiac Society, New Delhi, India, 6-9 March 2014

    PubMed Central

    Gupta, Saurabh K; Saxena, Anita

    2015-01-01

    The 5th Congress of Asia Pacific Pediatric Cardiac Society was held in New Delhi from 6-9 March 2014. This article describes the journey of preparing and hosting one of the largest international events in the specialty of Pediatric Cardiac Care ever held in India. A total of 938 delegates, including 400 from outside India, participated. The scientific program was inclusive keeping in mind the diverse background of delegates from the member nations. Large numbers of research papers were presented, mostly by fellows in training. PMID:25684899

  2. IBA investigations of loose garnets from Pietroasa, Apahida and Cluj-Someşeni treasures (5th century AD)

    NASA Astrophysics Data System (ADS)

    Bugoi, R.; Oanţă-Marghitu, R.; Calligaro, T.

    2016-03-01

    This paper reports the archaeometric investigations of 418 loose garnets from Pietroasa and Cluj-Someşeni treasures and Apahida II and III princely grave inventories (5th century AD). The chemical composition of the gems was determined by external beam micro-PIXE technique at the AGLAE accelerator of C2RMF, Paris, France. Complementary observations made by Optical Microscopy revealed details on the gemstones cutting and polishing and permitted to identify certain mineral inclusions. The compositional results evidenced several types of garnets from the pyralspite series, suggesting distinct provenances for these Early Medieval gems.

  3. Regular gravitational lagrangians

    NASA Astrophysics Data System (ADS)

    Dragon, Norbert

    1992-02-01

    The Einstein action with vanishing cosmological constant is for appropriate field content the unique local action which is regular at the fixed point of affine coordinate transformations. Imposing this regularity requirement one excludes also Wess-Zumino counterterms which trade gravitational anomalies for Lorentz anomalies. One has to expect dilatational and SL (D) anomalies. If these anomalies are absent and if the regularity of the quantum vertex functional can be controlled then Einstein gravity is renormalizable. On leave of absence from Institut für Theoretische Physik, Universität Hannover, W-3000 Hannover 1, FRG.

  4. High Temperature Inspection System

    SciTech Connect

    Robinson, C.W.

    1999-01-26

    The Remote and Specialty Equipment Section (RSES) of the Savannah River Technology Center has developed a High Temperature Inspection System (HTIS) for remotely viewing the interior of the Defense Waste Processing Facility (DWPF) melter pour spout. The DWPF is a vitrification facility at the Savannah River Site where radioactive waste is processed, mixed and melted with glass frit in an electrically heated melter, and poured into canisters for long-term storage. The glass mixture is transferred from the melter to the canisters via the pour spout, a vertical interface between the melter and the canisters. During initial operation of the melter, problems were experienced with wicking of the glass stream to the sides of the pour spout resulting in pluggage of the pour spout. A removable insert was developed to eliminate the wicking problem. Routine cleaning of the pour spout and replacement of the insert requires that the pour spout interior be inspected on a regular basis. The HTIS was developed to perform the inspection. The HTIS provides two video images: one view for aligning the HTIS with the pour spout and the other for inspecting the pour spout wall condition and other surfaces. The HTIS is carried into the melter cell using an overhead crane and is remotely connected to the cell's telerobotic manipulator (TRM). An operator uses the TRM to insert the HTIS into the 2-inch (5.08 cm) diameter pour spout, rotate it 360 degrees, and then remove it. This application created many challenges for the inspection device, especially regarding size and temperature. The HTIS design allows the video cameras to stay below a safe operating temperature during use in the 1100 degrees C environment. Many devices are designed to penetrate a wall and extend into a heated chamber only a few inches, but the HTIS is inserted into the heated chamber 22 inches (55.88 cm). Other devices can handle the insertion length and small diameter, but they are not designed to handle the high

  5. Automated visual inspection of an airplane exterior

    NASA Astrophysics Data System (ADS)

    Jovančević, Igor; Orteu, Jean-José; Sentenac, Thierry; Gilblas, Rémi

    2015-04-01

    This paper deals with the inspection of an airplane using a Pan-Tilt-Zoom camera mounted on a mobile robot moving around the airplane. We present image processing methods for detection and inspection of four different types of items on the airplane exterior. Our detection approach is focused on the regular shapes such as rounded corner rectangles and ellipses, while inspection relies on clues such as uniformity of isolated image regions, convexity of segmented shapes and periodicity of the image intensity signal. The initial results are promising and demonstrate the feasibility of the envisioned robotic system.

  6. PREFACE: 5th International Conference on Materials and Applications for Sensors and Transducers (IC-MAST2015)

    NASA Astrophysics Data System (ADS)

    Hristoforou, E.; Vlachos, D. S.; Giouroudi, I.; Kar-Narayan, S.; Potirakis, S.

    2016-03-01

    The 5th International Conference on Materials and Applications for Sensors and Transducers, Mykonos island, Greece, hosted about 110 oral and poster papers and more than 90 participants. IC-MAS, as an international annual conference which tries to meet the needs for various types of sensors, particularly those which may be manufactured by low cost methods (i.e. hybrid sensors, smart specialization devices, particular applications not necessarily requiring integrated micro-nano technologies), covering all types of materials and physical effects, appears to be a necessity. IC-MAST has been established as a high quality international conference by: I. Gathering together multinational researchers from all over the world, working in different materials for sensors and transducers and technical applications of sensors, but also in some cases in the management of the data coming from sensors and transducers. The careful selection of the conference place (like Aegean Sea, Budapest, Prague, Bilbao, Mykonos etc) allows for enjoying the local hospitality and sightseeing. II. Emphasizing in hybrid sensors and smart specialization devices produced by inexpensive methods, without excluding of course micro-nano technology, from all kinds of solid state, liquid and gaseous materials, as well as in particular transducer applications (design and development, as well as use of sensing data) III. Innovatively implementing the Virtual Paper Concept, allowing for large impact of research works presented in the conference by authors who either have no time or no funding support for visiting a conference; this year more than 12 virtual papers are presented in the 5th IC MAST, following a standardized procedure via the our robust and reliable Conference Site (www.icmast.net!) > IV. Allowing for lengthy technical and managerial discussions in terms of sensor, material and instrumentation development; furthermore, the different research groups gathered together are offered the particular

  7. Primary School 5th and 8th Graders' Understanding and Mental Models about the Shape of the World and Gravity

    ERIC Educational Resources Information Center

    Öztürk, Ayse; Doganay, Ahmet

    2013-01-01

    This study investigated primary school 5th and 8th graders' understanding and mental models related to the shape of the world and gravity, and how these models reflected the fact and what kind of a change there is from 5th to 8th graders. This research is based on a cross-sectional design. The study was conducted in a low socioeconomic level…

  8. Macracanthorhynchus hirudinaceus Eggs in Canine Coprolite from the Sasanian Era in Iran (4(th)/5(th) Century CE).

    PubMed

    Mowlavi, Gholamreza; Makki, Mahsasadat; Heidari, Zahra; Rezaeian, Mostafa; Mohebali, Mehdi; Araujo, Adauto; Boenke, Nicole; Aali, Abolfazl; Stollner, Thomas; Mobedi, Iraj

    2015-01-01

    Present paper is the second publication introducing the paleoparasitological findings from animal coprolites obtained from archeological site of Chehrabad salt mine in northwestern Iran. The current archeological site is located in northwest of Iran, dated to the Sassanian Era (4(th)/5(th) century CE). In the summer 2012 the carnivore coprolite was obtained within the layers in the mine and were thoroughly analyzed for parasites using TSP rehydration technique. Eggs of 0 were successfully retrieved from the examined coprolite and were confidently identified based on reliable references. Identifying of M. hirudinaceus eggs in paleofeces with clear appearance as demonstrated herein, is much due to appropriate preservation condition has been existed in the salt mine .The present finding could be regarded as the oldest acanthocephalan infection in Iran. PMID:26246822

  9. Macracanthorhynchus hirudinaceus Eggs in Canine Coprolite from the Sasanian Era in Iran (4th/5th Century CE)

    PubMed Central

    MOWLAVI, Gholamreza; MAKKI, Mahsasadat; HEIDARI, Zahra; REZAEIAN, Mostafa; MOHEBALI, Mehdi; ARAUJO, Adauto; BOENKE, Nicole; AALI, Abolfazl; STOLLNER, Thomas; MOBEDI, Iraj

    2015-01-01

    Present paper is the second publication introducing the paleoparasitological findings from animal coprolites obtained from archeological site of Chehrabad salt mine in northwestern Iran. The current archeological site is located in northwest of Iran, dated to the Sassanian Era (4th/5th century CE). In the summer 2012 the carnivore coprolite was obtained within the layers in the mine and were thoroughly analyzed for parasites using TSP rehydration technique. Eggs of 0 were successfully retrieved from the examined coprolite and were confidently identified based on reliable references. Identifying of M. hirudinaceus eggs in paleofeces with clear appearance as demonstrated herein, is much due to appropriate preservation condition has been existed in the salt mine .The present finding could be regarded as the oldest acanthocephalan infection in Iran. PMID:26246822

  10. Regularized Structural Equation Modeling

    PubMed Central

    Jacobucci, Ross; Grimm, Kevin J.; McArdle, John J.

    2016-01-01

    A new method is proposed that extends the use of regularization in both lasso and ridge regression to structural equation models. The method is termed regularized structural equation modeling (RegSEM). RegSEM penalizes specific parameters in structural equation models, with the goal of creating easier to understand and simpler models. Although regularization has gained wide adoption in regression, very little has transferred to models with latent variables. By adding penalties to specific parameters in a structural equation model, researchers have a high level of flexibility in reducing model complexity, overcoming poor fitting models, and the creation of models that are more likely to generalize to new samples. The proposed method was evaluated through a simulation study, two illustrative examples involving a measurement model, and one empirical example involving the structural part of the model to demonstrate RegSEM’s utility. PMID:27398019

  11. Krein regularization of QED

    NASA Astrophysics Data System (ADS)

    Forghan, B.; Takook, M. V.; Zarei, A.

    2012-09-01

    In this paper, the electron self-energy, photon self-energy and vertex functions are explicitly calculated in Krein space quantization including quantum metric fluctuation. The results are automatically regularized or finite. The magnetic anomaly and Lamb shift are also calculated in the one loop approximation in this method. Finally, the obtained results are compared to conventional QED results.

  12. Geometry of spinor regularization

    NASA Technical Reports Server (NTRS)

    Hestenes, D.; Lounesto, P.

    1983-01-01

    The Kustaanheimo theory of spinor regularization is given a new formulation in terms of geometric algebra. The Kustaanheimo-Stiefel matrix and its subsidiary condition are put in a spinor form directly related to the geometry of the orbit in physical space. A physically significant alternative to the KS subsidiary condition is discussed. Derivations are carried out without using coordinates.

  13. Communicating Science to Impact Learning? A Phenomenological Inquiry into 4th and 5th Graders' Perceptions of Science Information Sources

    NASA Astrophysics Data System (ADS)

    Gelmez Burakgazi, Sevinc; Yildirim, Ali; Weeth Feinstein, Noah

    2016-04-01

    Rooted in science education and science communication studies, this study examines 4th and 5th grade students' perceptions of science information sources (SIS) and their use in communicating science to students. It combines situated learning theory with uses and gratifications theory in a qualitative phenomenological analysis. Data were gathered through classroom observations and interviews in four Turkish elementary schools. Focus group interviews with 47 students and individual interviews with 17 teachers and 10 parents were conducted. Participants identified a wide range of SIS, including TV, magazines, newspapers, internet, peers, teachers, families, science centers/museums, science exhibitions, textbooks, science books, and science camps. Students reported using various SIS in school-based and non-school contexts to satisfy their cognitive, affective, personal, and social integrative needs. SIS were used for science courses, homework/project assignments, examination/test preparations, and individual science-related research. Students assessed SIS in terms of the perceived accessibility of the sources, the quality of the content, and the content presentation. In particular, some sources such as teachers, families, TV, science magazines, textbooks, and science centers/museums ("directive sources") predictably led students to other sources such as teachers, families, internet, and science books ("directed sources"). A small number of sources crossed context boundaries, being useful in both school and out. Results shed light on the connection between science education and science communication in terms of promoting science learning.

  14. Clinical development of new prophylactic antimalarial drugs after the 5th Amendment to the Declaration of Helsinki

    PubMed Central

    Dow, Geoffrey S; Magill, Alan J; Ohrt, Colin

    2008-01-01

    Malaria is of continuing concern in nonimmune traveling populations. Traditionally, antimalarial drugs have been developed as agents for dual indications (treatment and prophylaxis). However, since 2000, when the 5th Amendment to the Declaration of Helsinki (DH2000) was adopted, development of new malaria prophylaxis drugs in this manner has ceased. As a consequence, there may not be any new drugs licensed for this indication in the foreseeable future. Major pharmaceutical companies have interpreted DH2000 to mean that the traditional development paradigm may be considered unethical because of doubt over the likelihood of benefit to endemic populations participating in clinical studies, the use of placebo, and the sustainability of post-trial access to study medications. In this article, we explore the basis of these concerns and suggest that the traditional development paradigm remains ethical under certain circumstances. We also consider alternative approaches that may be more attractive to sponsors as they either do not use placebo, or utilize populations in endemic countries who may unambiguously benefit. These approaches represent the way forward in the future, but are at present unproven in clinical practice, and face numerous regulatory, logistical and technical challenges. Consequently, in the short term, we argue that the traditional clinical development paradigm remains the most feasible approach and is ethical and consistent with the spirit of DH2000 under the appropriate circumstances. PMID:19209263

  15. Attitudes towards General Practice: a comparative cross-sectional survey of 1st and 5th year medical students

    PubMed Central

    Kruschinski, Carsten; Wiese, Birgitt; Hummers-Pradier, Eva

    2012-01-01

    Objective: Positive attitudes towards General Practice can be understood as a prerequisite for becoming a General Practitioner (GP) and for collaboration with GPs later on. This study aimed to assess attitudes of medical students at the beginning and the end of medical school. Methods: A total of 160 1st year students at Hannover Medical School were surveyed. Their attitudes were compared to those of 287 5th year students. Descriptive, bi- and multivariate analyses were performed to investigate influences of year of study and gender. Results: Year of study and gender both were associated with the attitudes towards General Practice. The interest in General Practice and patient-orientation (communication, care of older patients with chronic diseases) was higher in 1st year students compared to more advanced students. Female students valued such requirements more than male students, the differences in attitudes between the years of study being more pronounced in male students. Conclusion: Despite some limitations caused by the cross-sectional design, the attitudes towards General Practice competencies changed to their disadvantage during medical school. This suggests a formative influence of the strategies used in medical education. Educational strategies, however, could be used to bring about a change of attitudes in the other direction. PMID:23255966

  16. Fast food consumption and food prices: evidence from panel data on 5th and 8th grade children.

    PubMed

    Khan, Tamkeen; Powell, Lisa M; Wada, Roy

    2012-01-01

    Fast food consumption is a dietary factor associated with higher prevalence of childhood obesity in the United States. The association between food prices and consumption of fast food among 5th and 8th graders was examined using individual-level random effects models utilizing consumption data from the Early Childhood Longitudinal Study, Kindergarten Class of 1998-99 (ECLS-K), price data from American Chamber of Commerce Researchers Association (ACCRA), and contextual outlet density data from Dun and Bradstreet (D&B). The results found that contextual factors including the price of fast food, median household income, and fast food restaurant outlet densities were significantly associated with fast food consumption patterns among this age group. Overall, a 10% increase in the price of fast food was associated with 5.7% lower frequency of weekly fast food consumption. These results suggest that public health policy pricing instruments such as taxes may be effective in reducing consumption of energy-dense foods and possibly reducing the prevalence of overweight and obesity among US children and young adolescents. PMID:22292115

  17. Historical and future land carbon cycle, results from the 5th Coupled Model Intercomparison Project (CMIP5)

    NASA Astrophysics Data System (ADS)

    Friedlingstein, Pierre; Anav, Alessandro; Murray-Tortarolo, Guillermo; Wenzel, Sabrina; Cox, Peter; Eyring, Veronika

    2014-05-01

    The 5th Coupled Model Intercomparison Project (CMIP5) provided a unique source of Earth System Models simulations, generating an unprecedented range of analysis of many components of the climate system. In this presentation we will focus on the land carbon cycle, its response to the historical perturbation and its projected response in the future under the forcing of the different Representative Concentration Pathways (RCPs) scenarios. There is a broad agreement across models on the evolution of the carbon exchange between the atmosphere and the land since the beginning of the industrial revolution. Carbon sink driven by atmospheric CO2 increase more than compensates now the carbon sources due to land use changes, consistent with independent estimates. The future of the land carbon cycle is significantly more uncertain, even for a given RCP scenario. There is no overall agreement across models on the sign of the land carbon sink by the end of the 21st century, land carbon cycle sensitivity to atmospheric CO2 increase and climate change being strongly model dependent. Model evaluation and use of emerging constraint should help reduce uncertainties in future carbon cycle projections.

  18. Fast Food Consumption and Food Prices: Evidence from Panel Data on 5th and 8th Grade Children

    PubMed Central

    Khan, Tamkeen; Powell, Lisa M.; Wada, Roy

    2012-01-01

    Fast food consumption is a dietary factor associated with higher prevalence of childhood obesity in the United States. The association between food prices and consumption of fast food among 5th and 8th graders was examined using individual-level random effects models utilizing consumption data from the Early Childhood Longitudinal Study, Kindergarten Class of 1998-99 (ECLS-K), price data from American Chamber of Commerce Researchers Association (ACCRA), and contextual outlet density data from Dun and Bradstreet (D&B). The results found that contextual factors including the price of fast food, median household income, and fast food restaurant outlet densities were significantly associated with fast food consumption patterns among this age group. Overall, a 10% increase in the price of fast food was associated with 5.7% lower frequency of weekly fast food consumption. These results suggest that public health policy pricing instruments such as taxes may be effective in reducing consumption of energy-dense foods and possibly reducing the prevalence of overweight and obesity among US children and young adolescents. PMID:22292115

  19. Bond Strength of 5th, 6th and 7th Generation Bonding Agents to Intracanal Dentin of Primary Teeth

    PubMed Central

    Afshar, Hossein; Baradaran Nakhjavani, Yahya; Rahro Taban, Sedighe; Baniameri, Zahra; Nahvi, Azam

    2015-01-01

    Objectives: This in-vitro study sought to assess the push-out bond strength of a total etch and 2 self-etch bonding systems to intracanal dentin of primary anterior teeth (PAT). Materials and Methods: Thirty-six primary anterior teeth were randomly divided into 3 groups of 5th generation (Single Bond 2), 6th generation (Clearfil SE) and 7th generation (Single Bond Universal) bonding agents. The canal orifice was restored with composite resin and the push-out test was carried out to assess the bond strength. After applying the push-out load, specimens were evaluated under a light microscope at 40X magnification. One-way ANOVA and log-rank test on Kaplan-Meier curves were applied for the comparison of bond strength among the 3 groups. Results: The mean± standard deviation (SD) bond strength was 13.6±5.33 MPa for Single Bond 2, 13.85±5.86 MPa for Clearfil SE and 12.28±5.24 MPa for Single Bond Universal. The differences in bond strength among the 3 groups were not statistically significant (P>0.05). Conclusion: All three bonding agents are recommended for use with composite posts in PAT. However, due to high technical sensitivity of the Total Etch system, single or two-step self etch systems may be preferred for uncooperative children. PMID:26056518

  20. Final Report for DOE Support of 5th the International Workshop on Oxide Surfaces (IWOX-V)

    SciTech Connect

    Charles T. Campbell

    2007-02-02

    The 5th International Workshop on Oxide Surfaces (IWOX-V) was held at Granlibakken Conference center in Lake Tahoe, CA, January 7-12. The total attendance was ~90. The breakdown of attendees by country is as follows: USA 41 Germany 18 Japan 7 UK 5 Italy 5 France 4 Austria 3 Denmark 3 Cech. Repub. 1 Ireland 1 New Zealand 1 India 1 The technical program included oral sessions on the electronic and magnetic properties of oxide surfaces, surface and interface structure, advances in theory, surface defects, thin film oxides on metals and on oxides, thin film metals on oxides, surface photochemistry, surface reactivity, and interactions with water. Two evening poster sessions had similar themes. As in previous years, the program stimulated significant interest and discussion among the attendees. The local expenses (food and lodging, $918 per person) for eight foreign invited speakers were covered by BES funds. In addition, partial reimbursement for travel ($328 per person) was supported by BES funds for two more foreign invited speakers.

  1. Inspection and Emotion

    ERIC Educational Resources Information Center

    Perryman, Jane

    2007-01-01

    In this paper I explore the emotional impact of inspection on the staff of a school in the two years between Ofsted inspections. Using data from one school undergoing inspection, I argue that the negative emotional impact of inspection of teachers goes beyond the oft-reported issues of stress and overwork. Teachers experience a loss of power and…

  2. Implementing SPRINTT [Student Polar Research with IPY National(and International)Teacher Training] in 5th Grade Science

    NASA Astrophysics Data System (ADS)

    Glass, D. S.

    2009-12-01

    I implemented the new NSF-funded SPRINTT (Student Polar Research with IPY National (and International) Teacher Training) curriculum with a 5th grade science class. SPRINTT, developed at U.S. Satellite Laboratory, Inc., is a 5-8 week science program teaching 5th through 10th graders to investigate climate change using polar data. The program includes perspectives of both Western scientists and the indigenous Northern population. The course contains three phases: Phase 1 includes content, data interpretation, and hands-on experiments to study Frozen Water, Frozen Land, and Food; Phase 2 (optional) includes further content on specific polar topics; and Phase 3 is a scaffolded research investigation. Before the course, teachers were trained via live webinars. This curriculum capitalizes on children’s innate fascination with our planet’s final frontier and combines it with the politically and scientifically relevant topic of climate change. In 2009, I used SPRINTT with 23 heterogeneous fifth grade students at National Presbyterian School in Washington DC for an environmental science unit. Overall, it was a success. The students met most of the learning objectives and showed enthusiasm for the material. I share my experiences to help other educators and curriculum developers. The Phase 1 course includes earth science (glaciers, sea ice, weather and climate, greenhouse gases, seasons, and human impacts on environments), life science (needs of living things, food and energy transfer, adaptations, and ecosystems and biomes) and physical science (phases of matter). Tailoring the program, I focused on Phase 1, the most accessible material and content, while deemphasizing the more cumbersome Phase 3 online research project. Pre-assessments documented the students’ misconceptions and informed instruction. The investigations were appropriately educational and interesting. For example, students enjoyed looking at environmental factors and their impact on the people in the

  3. When should orthostatic blood pressure changes be evaluated in elderly: 1st, 3rd or 5th minute?

    PubMed

    Soysal, Pinar; Aydin, Ali Ekrem; Koc Okudur, Saadet; Isik, Ahmet Turan

    2016-01-01

    Detection of orthostatic hypotension (OH) is very important in geriatric practice, since OH is associated with mortality, ischemic stroke, falls, cognitive failure and depression. It was aimed to determine the most appropriate time for measuring blood pressure in transition from supine to upright position in order to diagnose OH in elderly. Comprehensive geriatric assessment (CGA) including Head up Tilt Table (HUT) test was performed in 407 geriatric patients. Orthostatic changes were assessed separately for the 1st, 3rd and 5th minutes (HUT1, HUT3 and HUT5, respectively) taking the data in supine position as the basis. The mean age, recurrent falls, presence of dementia and Parkinson's disease, number of drugs, alpha-blocker and anti-dementia drug use, and fasting blood glucose levels were significantly higher in the patients with versus without OH; whereas, albumin and 25-hydroxy vitamin D levels were significantly lower (p<0.05). However, different from HUT3 and HUT5, Charlson Comorbidity Index and the prevalence of diabetes mellitus were higher, the use of antidiabetics, antipsychotics, benzodiazepine, opioid and levodopa were more common (p<0.05). Statistical significance of the number of drugs and fasting blood glucose level was prominent in HUT1 as compared to HUT3 (p<0.01, p<0.05). Comparison of the patients that had OH only in HUT1, HUT3or HUT5 revealed no difference in terms of CGA parameters. These results suggests that orthostatic blood pressure changes determined at the 1st minute might be more important for geriatric practice. Moreover, 1st minute measurement might be more convenient in the elderly as it requires shorter time in practice. PMID:27077324

  4. Intraocular tissue ablation using an optical fibre to deliver the 5th harmonic of a Nd:YAG

    NASA Astrophysics Data System (ADS)

    Miller, Joseph; Yu, Xiaobo; Yu, Paula K.; Cringle, Stephen J.; Yu, Dao-Yi

    2009-02-01

    We report the evaluation of a system which delivers the 5th harmonic of an Nd:YAG (213nm) via optical fibre to ocular tissue sites. The 213nm beam is concentrated, using a hollow glass taper, prior to launch into 200 μm or 600 μm core diameter silica/silica optical fibre. The fibre tip was tapered to enhance the fluence delivered. An operating window of fluence values that could be delivered via 330 - 1100mm lengths of optical fibre was determined. The lower value of 0.2J/cm2 determined by the ablation threshold of the tissue and the upper value of 1.3J/cm2 by the launch, transmission and tip characteristics of the optical fibre. The fluence output decreased as a function of both transmitted pulse energy and number of pulses transmitted. Fresh retinal tissue was cleanly ablated with minimal damage to the surrounding tissue. Lesions were generated using 1, 3 and 10 pulses with fluences from 0.2 to 1.0J/cm2. The lesion depth demonstrated clear dose dependence. Lesions generated in ex vivo preparations of human trabecular meshwork in a fluid environment also demonstrated dose dependence, 50 pulses being sufficient to create a hole within the trabecular meshwork extending to Schlemm's canal. The dose dependence of the ablation depth combined with the ability of this technique to create a conduit through to Schlemm's canal demonstrates the potential of this technique for ophthalmological applications requiring precise and controlled intraocular tissue removal and has potential applications in the treatment and management of glaucoma.

  5. Indian Health Career Handbook and Report on Ned Hatathli Seminar for Southern Arizona Indian Students (5th, Tucson, Arizona, February 6-7, 1975).

    ERIC Educational Resources Information Center

    Taylor, Arnold, Ed.; And Others

    Utilizing comments from teachers, professionals, college and high school students, this report is derived from the 5th Ned Hatathli Seminar, sponsored by the Navajo Health Authority, and presents factual information relative to American Indian participation in Indian Health careers. The following major speeches are presented: (1) "The Practice of…

  6. Engaging Minds. Proceedings of the National Academy for Integration of Research, Teaching and Learning Annual Conference (5th, Galway, Ireland, June 9-10, 2011)

    ERIC Educational Resources Information Center

    National Academy for Integration of Research, Teaching and Learning (NJ1), 2011

    2011-01-01

    This publication contains the papers presented at the 5th Annual Conference of National Academy for Integration of Research, Teaching and Learning (NAIRTL) and the 9th Galway Symposium. Presenters from across Ireland and overseas share their perspectives. The theme of engagement touches on the very heart of what a "higher" education should be…

  7. Immediate and Short-Term Effects of the 5th Grade Version of the "keepin' it REAL" Substance Use Prevention Intervention

    ERIC Educational Resources Information Center

    Hecht, Michael L.; Elek, Elvira; Wagstaff, David A.; Kam, Jennifer A.; Marsiglia, Flavio; Dustman, Patricia; Reeves, Leslie; Harthun, Mary

    2009-01-01

    This study assessed the immediate and short-term outcomes of adapting a culturally-grounded middle school program, "keepin' it REAL", for elementary school students. After curriculum adaptation, 10 schools were randomly assigned to the intervention in 5th grade with follow-up boosters in 6th grade; 13 schools were randomly assigned to the control…

  8. International Roundtable on The Lifelong Learning and New Technologies Gap: Reaching the Disadvantaged (5th, Philadelphia, Pennsylvania, December 8-10, 1999). Preliminary Report.

    ERIC Educational Resources Information Center

    National Center on Adult Literacy, Philadelphia, PA.

    Three elements defined the focus of the 5th Roundtable: lifelong learning, the new technologies gap, and reaching the disadvantaged. Participants referred frequently to the digital divide, a term that captures differential access to and use of information and communication technology (ICT). The questions that guided discussion related to ICT and…

  9. Evaluation of the Effects of Argumentation Based Science Teaching on 5th Grade Students' Conceptual Understanding of the Subjects Related to "Matter and Change"

    ERIC Educational Resources Information Center

    Çinar, Derya; Bayraktar, Sule

    2014-01-01

    The aim of this study is to evaluate the effects of Argumentation Based Science Teaching on 5th grade students' conceptual understanding of the subjects related to "Matter and Change". This research is a qualitative research and its design is a multiple (compare) case study. In this study, semi-structured interviews related to the…

  10. Evaluation of the Effects of Argumentation Based Science Teaching on 5th Grade Students' Conceptual Understanding of the Subjects Related to "Matter and Change"

    ERIC Educational Resources Information Center

    Çinar, Derya; Bayraktar, Sule

    2014-01-01

    The aim of this study is to evaluate the effects of Argumentation Based Science Teaching on 5th grade students' conceptual understanding of the subjects related to "Matter and Change". This research is a qualitative research and its design is a multiple (compare) case study. In this study, semi-structured interviews related to the…

  11. Measures of self-efficacy and norms for low-fat milk consumption are reliable and related to beverage consumption among 5th graders at school lunch

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The objective was to determine the reliability and validity of scales measuring low-fat milk consumption self-efficacy and norms during school lunch among a cohort of 5th graders. Two hundred seventy-five students completed lunch food records and a psychosocial questionnaire measuring self-efficacy ...

  12. Determination of Motivation of 5th Grade Students Living in Rural and Urban Environments towards Science Learning and Their Attitudes towards Science-Technology Course

    ERIC Educational Resources Information Center

    Kenar, Ismail; Köse, Mücahit; Demir, Halil Ibrahim

    2016-01-01

    In this research, determination of motivation of 5th grade students living in rural and urban environments towards science learning and their attitudes towards science-technology course is aimed. This research is conducted based on descriptive survey model. Samples are selected through teleological model in accordance with the aim of this…

  13. The Effect of Direct Instruction Strategy on Math Achievement of Primary 4th and 5th Grade Students with Learning Difficulties

    ERIC Educational Resources Information Center

    Al-Makahleh, Ahmad Abdulhameed Aufan

    2011-01-01

    This study seeks to verify the effect of direct instruction strategy on Math achievment of students with learning difficulties in the fourth and fifth grade levels and measure the improvement in their attitudes to Mathematics. Sample consisted of sixty (60) students with Math learning difficulties attending 4th and 5th grade level resource rooms…

  14. Color Duplex Assessment of 4th and 5th Internal Mammary Artery Perforators: The Pedicles of the Medially Based Lower Pole Breast Flaps

    PubMed Central

    Abdel-Monem, Kareem; Elshahat, Ahmed; Abou-Gamrah, Sherif; Eldin Abol-Atta, Hossam; Abd Eltawab, Reda; Massoud, Karim

    2012-01-01

    Objective: Reconstruction of a breast after mastectomy using the contralateral lower pole breast flap is an appealing procedure because it uses the tissues that were going to be excised during reduction of the sound breast to achieve symmetry. Literature mentioned that these flaps are supplied by the lower internal mammary artery perforators (IMAPs) with no further details. The aim of this study was to determine the site, size, and number of the 4th and 5th IMAPs by using preoperative color Duplex ultrasound and intraoperative exploration. Method: Twenty breasts in 10 patients who presented for reduction mammoplasty were included in this study. Preoperative color duplex was used to determine IMAPs in the 4th and 5th intercostal spaces. These perforators were localized intraoperatively. Intravenous fluorescein injection was used to determine the perfusion of the lower pole breast flap on the basis of these perforators. Results: Statistically, the 4th IMAPs diameters were significantly larger than the 5th IMAPs diameters (P < .05). The lower pole breast flap was perfused through these perforators. Conclusion: Color Duplex ultrasound is an accurate tool to preoperatively determine the 4th and 5th IMAPs. PMID:22292100

  15. Final technical report: Partial support for US participants in the 5th International Marine Biotechnology Conference, Townsville, Australia, Sept 29 - Oct 5, 2000

    SciTech Connect

    Zohar, Yonathan; Hill, R.; Robb, F.

    2001-04-09

    Funding was provided for US participants in the 5th International Marine Biotechnology Conference held in Townsville, Australia from September 29 to October 5, 2000. DOE funds were used for travel awards for six US participants in this conference. DOE funds were successfully used to advance participation of US scientists in the important emerging field of marine biotechnology.

  16. An Analysis of the Learning Activities Covered in the 5th Grade Science Textbooks Based on 2005 and 2013 Turkish Science Curricula

    ERIC Educational Resources Information Center

    Aydogdu, Cemil; Idin, Sahin

    2015-01-01

    The aim of this study is to analyze the learning activities covered in 5th grade elementary science textbooks which depend on 2005 and 2013 elementary science curricula. Two elementary science textbooks [which] depend on 2005 science curriculum and two elementary science textbooks [which] depend on 2013 science curriculum were researched. The…

  17. An Analysis of the Learning Activities Covered in the 5th Grade Science Textbooks Based on 2005 and 2013 Turkish Science Curricula

    ERIC Educational Resources Information Center

    Aydogdu, Cemil; Idin, Sahin

    2015-01-01

    The aim of this study is to analyze the learning activities covered in 5th grade elementary science textbooks which depend on 2005 and 2013 elementary science curricula. Two elementary science textbooks depends on 2005 science curriculum and two elementary science textbooks depend on 2013 science curriculum were researched. The study is a…

  18. The Social Interactions of Students with Disabilities in a 5th Grade Level Inclusive Classroom and the Effect on Academic Achievement

    ERIC Educational Resources Information Center

    Marshall-Reed, Estella

    2010-01-01

    This dissertation is a qualitative, ethnographic case study of 3 students with disabilities. The purpose of this research study was to observe and collect descriptive accounts of the social interactions that exist between the cultures in a 5th grade level inclusive classroom, such as the interactions between the special education students, general…

  19. Comparison of the Leiter International Performance Scale-Revised and the Stanford-Binet Intelligence Scales, 5th Edition, in Children with Autism Spectrum Disorders

    ERIC Educational Resources Information Center

    Grondhuis, Sabrina Nicole; Mulick, James A.

    2013-01-01

    A review of hospital records was conducted for children evaluated for autism spectrum disorders who completed both the Leiter International Performance Scale-Revised (Leiter-R) and Stanford-Binet Intelligence Scales, 5th Edition (SB5). Participants were between 3 and 12 years of age. Diagnoses were autistic disorder (n = 26, 55%) and pervasive…

  20. U.S. Dietary and Physical Activity Guideline Knowledge and Corresponding Behaviors among 4th and 5th Grade Students: A Multi-Site Pilot Study

    ERIC Educational Resources Information Center

    Bea, Jennifer W.; Martinez, Stephanie; Armstrong-Florian, Traci; Farrell, Vanessa; Martinez, Cathy; Whitmer, Evelyn; Hartz, Vern; Blake, Samuel; Nicolini, Ariana; Misner, Scottie

    2014-01-01

    Knowledge of U.S. dietary and physical activity recommendations and corresponding behaviors were surveyed among 4th and 5th graders in five Arizona counties to determine the need for related education in SNAP-Ed eligible schools. A <70% target response rate was the criterion. Participants correctly identified recommendations for: fruit, 20%;…

  1. EUNIS '99: Information Technology Shaping European Universities. Proceedings of the International European University Information Systems (5th, Espoo, Finland, June 7-9, 1999).

    ERIC Educational Resources Information Center

    1999

    This document presents the proceedings from the 5th International European University Information Systems (EUNIS) Conference on Information Technology that took place in Helsinki, Finland on June 7-9, 1999. Topics of the conference proceedings were divided into five tracks (A through E): Use of Information Technology in Learning and Teaching;…

  2. Integration of physical activity and technology motion devices within a combined 5th and 6th grade science curriculum

    NASA Astrophysics Data System (ADS)

    Finn, Kevin Eugene

    Background: National recommendations to increase school-based physical activity and promote academic success advise incorporating movement into traditional classroom lessons. Classroom-based physical activities have favorable associations with indicators of cognitive functioning, academic behaviors, and academic achievement. Purpose: This study analyzed the Active Science framework, which incorporated school-based physical activity within interactive science classroom lessons. Specifically, the study measured the effects of the Active Science framework on student physical activity levels in the classroom, student learning of science inquiry skills and content knowledge, and student perceptions of physical activity and science. A secondary purpose was to evaluate the teachers' perceptions on the implementation of the framework. Subjects: Participants were 37 Hispanic girls (age=11.1 +/-0.8 yr) in mixed 5th/6th grade science classes in a private, urban middle school. Methods: Physical activity levels of the students during the Active Science framework were measured using pedometers and heart rate monitors. Pre- and post-tests were used to assess the levels of learning achieved by the students in science inquiry skills and content during the Active Science framework. Student perceptions and attitudes toward science and physical activity were measured during student focus groups and pre-post perception surveys. Lesson plan evaluations completed by the teachers and structured interviews provided data on implementation of the framework. Results: Physical activity results showed heart rate (146 +/-9 bpm); maximal heart rate (196 +/-10.6 bpm); time (35 +/-2.5 mins); steps (3050 +/-402.7); calories (99 +/-8.4 kcal); and distance (1.1 +/-0.2 miles) while performing the activity portion of the science lessons were consistent with national recommendations for accumulating school-based physical activity. Significant increases in science content and skills test scores with a 22

  3. 5th National Audit Project (NAP5) on accidental awareness during general anaesthesia: summary of main findings and risk factors.

    PubMed

    Pandit, J J; Andrade, J; Bogod, D G; Hitchman, J M; Jonker, W R; Lucas, N; Mackay, J H; Nimmo, A F; O'Connor, K; O'Sullivan, E P; Paul, R G; Palmer, J H M G; Plaat, F; Radcliffe, J J; Sury, M R J; Torevell, H E; Wang, M; Hainsworth, J; Cook, T M

    2014-10-01

    We present the main findings of the 5th National Audit Project (NAP5) on accidental awareness during general anaesthesia (AAGA). Incidences were estimated using reports of accidental awareness as the numerator, and a parallel national anaesthetic activity survey to provide denominator data. The incidence of certain/probable and possible accidental awareness cases was ~1:19,600 anaesthetics (95% confidence interval 1:16,700-23,450). However, there was considerable variation across subtypes of techniques or subspecialities. The incidence with neuromuscular block (NMB) was ~1:8200 (1:7030-9700), and without, it was ~1:135,900 (1:78,600-299,000). The cases of AAGA reported to NAP5 were overwhelmingly cases of unintended awareness during NMB. The incidence of accidental awareness during Caesarean section was ~1:670 (1:380-1300). Two-thirds (82, 66%) of cases of accidental awareness experiences arose in the dynamic phases of anaesthesia, namely induction of and emergence from anaesthesia. During induction of anaesthesia, contributory factors included: use of thiopental, rapid sequence induction, obesity, difficult airway management, NMB, and interruptions of anaesthetic delivery during movement from anaesthetic room to theatre. During emergence from anaesthesia, residual paralysis was perceived by patients as accidental awareness, and commonly related to a failure to ensure full return of motor capacity. One-third (43, 33%) of accidental awareness events arose during the maintenance phase of anaesthesia, mostly due to problems at induction or towards the end of anaesthesia. Factors increasing the risk of accidental awareness included: female sex, age (younger adults, but not children), obesity, anaesthetist seniority (junior trainees), previous awareness, out-of-hours operating, emergencies, type of surgery (obstetric, cardiac, thoracic), and use of NMB. The following factors were not risk factors for accidental awareness: ASA physical status, race, and use or omission

  4. Effect on Physical Activity of a Randomized Afterschool Intervention for Inner City Children in 3rd to 5th Grade

    PubMed Central

    Crouter, Scott E.; de Ferranti, Sarah D.; Whiteley, Jessica; Steltz, Sarah K.; Osganian, Stavroula K.; Feldman, Henry A.; Hayman, Laura L.

    2015-01-01

    Background Less than 45% of U.S. children meet the 60 min.d-1 physical activity (PA) guideline. Structured after-school PA programing is one approach to help increase activity levels. This study aimed to evaluate the feasibility and short-term impact of a supervised after-school PA and nutrition education program on activity levels. Methods Forty-two 3rd-5th graders from an inner-city school in Boston, MA were randomly assigned to a 10-wk after-school program of either: 1) weekly nutrition education, or 2) weekly nutrition education plus supervised PA 3 d.wk-1 at a community-based center. At baseline and follow-up, PA was measured using accelerometry and fitness (VO2max) was estimated using the PACER 15-m shuttle run. Additional measures obtained were non-fasting finger stick total cholesterol (TC) and glucose levels, waist circumference (WC), body mass index (BMI), percent body fat (%BF), and blood pressure (BP). Values are presented as mean±SE, unless noted otherwise. Results Thirty-six participants completed the study (mean±SD; age 9.7±0.9 years). Participants attended >80% of the sessions. After adjusting for accelerometer wear time and other design factors, light and moderate-to-vigorous PA (MVPA) increased in the nutrition+PA group (+21.5±14.5 and +8.6±8.0 min.d-1, respectively) and decreased in the nutrition only group (-35.2±16.3 and -16.0±9.0 min.d-1, respectively); mean difference between groups of 56.8±21.7 min.d-1 (light PA, p = 0.01) and 24.5±12.0 min.d-1 (MVPA, p = 0.04). Time spent in sedentary behaviors declined in the nutrition+PA group (-14.8±20.7 min.d-1) and increased in the nutrition only group (+55.4±23.2 min.d-1); mean difference between groups of -70.2±30.9 min.d-1 (p = 0.02). Neither group showed changes in TC, BP, WC, %BF, BMI percentile, or fitness (p>0.05). Conclusions The supervised afterschool community-based nutrition and PA program was well accepted and had high attendance. The changes in light PA and MVPA has potential

  5. PREFACE: PASREG 2005: The 5th International Workshop on Processing and Applications of Superconducting (RE)BCO Large Grain Materials

    NASA Astrophysics Data System (ADS)

    Murakami, Masato; Cardwell, David; Salama, Kamel; Izumi, Mitsuru

    2006-07-01

    Large grain, (RE)BCO bulk superconductors fabricated by top-seeded melt growth (TSMG) have outstanding potential for a variety of engineering applications such as magnetic separators, flywheel energy storage, magnetic bearings and permanent magnet-like devices due to their ability to generate large magnetic fields. Recent developments in materials and systems research has led to the manufacture of proto-type devices for use in magnetron sputtering, magnetic stirrers and a mobile magnetic separator based on bulk materials technology. This issue contains selected papers presented at the 5th International Workshop on the Processing and Applications of Superconducting (RE)BCO Large Grain Materials held on 21-23 October 2005 at Tokyo Marine University to report progress made in this field over the previous two years. The workshop followed those held previously in Cambridge, UK (1997), Morioka, Japan (1999), Seattle, USA (2001), and Jena, Germany (2003). A total of 76 papers were presented at this workshop, of which 27 were presented in oral form and 49 were presented as posters. This issue contains a total of 36 selected papers in the following categories of bulk (RE)BCO large grain material: processing, characterization, and applications. The editors are grateful for the support of many colleagues both within and outside the immediate bulk community who reviewed the manuscripts to guarantee their high technical quality. Finally, the attendees wish to acknowledge the efforts of Professor Mitsuru Izumi and his research staff from Tokyo Marine University for being generous hosts during the workshop, and the efforts of Professor Masato Murakami for the overall organization of the meeting. The International PASREG Board selected the following distinguished researchers as recipients of the 2005 PASREG Award of Excellence to acknowledge their contribution to the development of bulk high temperature superconductors: • Dr Michael Strasik (Boeing, Seattle, USA) • Dr Hiroshi

  6. Two Successful Outreach Programs at Storm Peak Laboratory: GRASP for Undergraduates and Partnership for 5th Grade Science Education

    NASA Astrophysics Data System (ADS)

    Hallar, A. G.; McCubbin, I. B.; Wright, J.

    2007-12-01

    The Desert Research Institute operates a high elevation facility, Storm Peak Laboratory (SPL), located on the Steamboat Springs Ski Resort at an elevation 10,500 ft. SPL provides an ideal location for long-term atmospheric research. The SPL mission statement is to ensure that the laboratory will continue to integrate climate research and education by advancing discovery and understanding within the field of pollution, aerosol and cloud interactions. During the last year, SPL has created two successful outreach programs reaching very different audiences. First, to engage students from local elementary schools, SPL established a 5th grade climate education program. This program is based on a partnership between SPL and Yampatika's&penvironmental educators. Yampatika is a non-profit outdoor environmental education organization. The program spans three days for each school and includes five elementary schools. During the first day, educators from Yampatika visit each classroom to introduce the concepts of climate and weather as well as teach students how to use scientific equipment. During the field program on the second day, students measure and record information about temperature, pressure, relative humidity, wind speed, and particle concentration while they travel to SPL via the gondola (in winter) or Suburban (in fall). Once at the laboratory, students tour the facility, discuss SPL research activities, and explore application of these activities to their curriculum. Following the field trip, Yampatika educators and SPL scientists will visit the school for a follow-up to help children explore concepts, answer questions, and evaluate students" learning. The second program, Geoscience Research at Storm Peak (GRASP), was designed to engage students from underrepresented groups and created a partnership between three Minority Serving Institutions and the University of Nevada, Reno (UNR). Undergraduate students from Tennessee State University, Howard University

  7. Piping inspection instrument carriage

    SciTech Connect

    Zollinger, W.T.; Treanor, R.C.

    1993-09-20

    This invention is comprised of a pipe inspection instrument carriage for use with a pipe crawler or other locomotion means for performing internal inspections of piping surfaces. The carriage has a front leg assembly, a rear leg assembly and a central support connecting the two assemblies and for mounting an instrument arm having inspection instruments. The instrument arm has means mounted distally thereon for axially aligning the inspection instrumentation and means for extending the inspection instruments radially outward to operably position the inspection instruments on the piping interior. Also, the carriage has means for rotating the central support and the front leg assembly with respect to the rear leg assembly so that the inspection instruments azimuthally scan the piping interior. The instrument carriage allows performance of all piping inspection operations with a minimum of moving parts, thus decreasing the likelihood of performance failure.

  8. Electronic Inspection of Beef

    NASA Technical Reports Server (NTRS)

    Anselmo, Victor J.; Gammell, Paul M.; Clark, Jerry

    1987-01-01

    Two proposed methods for grading beef quality based on inspection by electronic equipment: one method uses television camera to generate image of a cut of beef as customer sees it; other uses ultrasonics to inspect live animal or unsliced carcasses. Both methods show promise for automated meat inspection.

  9. Software Formal Inspections Guidebook

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

  10. Software Formal Inspections Standard

    NASA Technical Reports Server (NTRS)

    1993-01-01

    This Software Formal Inspections Standard (hereinafter referred to as Standard) is applicable to NASA software. This Standard defines the requirements that shall be fulfilled by the software formal inspections process whenever this process is specified for NASA software. The objective of this Standard is to define the requirements for a process that inspects software products to detect and eliminate defects as early as possible in the software life cycle. The process also provides for the collection and analysis of inspection data to improve the inspection process as well as the quality of the software.

  11. Proceedings for the 5th Asia-Pacific Conference on Disaster Medicine: creating an agenda for action.

    PubMed

    De Grace, M; Ericson, D; Folz, H; Greene, W; Ho, K; Pearce, L

    2001-01-01

    Disaster medicine has come to the forefront and has become the focus of interest not only in the medical community, but also in the eyes of the public. The 5th APCDM was convened in Vancouver, Canada, 27-30 September 2000. It brought together over 300 delegates from 32 countries to share their experiences and thoughts regarding disaster events and how to effectively manage them. The conference was devoted to the task of establishing priorities and creating an Agenda for Action. From the discussions, key actions required were defined: COMMUNICATIONS: (1) Identify existing regional telehealth groups and gather lessons to be learned from them; (2) Form a telehealth advisory group to work with regional groups to compile telehealth initiatives, identify international protocols in telehealth already in existence, and solicit feedback before setting international standards; and (3) Increase corporate partnerships in the fields of telehealth and telecommunications, and invite corporations to send delegates to future APCDM meetings. This should be an initiative of the APCDM, the World Association of Disaster and Emergency Medicine (WADEM), or the European Society of Emergency Medicine. EDUCATION AND RESEARCH: (1) Formalize education in disaster medicine and management. The World Health Organization and WADEM should take a leadership role; (2) WADEM is requested to hold a conference with a focus on qualitative research; (3) WHO is requested to continue the provision of international research teams, but to advocate for the development of national disaster research infrastructure; (4) Make research findings and reports available on web sites of such organizations as WHO and PAHO; (5) Develop the translation of research for community utilization. The WHO and PAHO are organizations that are requested to consider this action; and (6) WADEM/APCDM are requested to focus future conferences on applied research. INFORMATION AND DATA: (1) Create an "Information and Data Clearinghouse

  12. Effect of Anatomical Modeling on Space Radiation Dose Estimates: A Comparison of Doses for NASA Phantoms and 5th, 50th, and 95th Percentile UF Hybrid Phantoms

    NASA Technical Reports Server (NTRS)

    Bahadori, A.; VanBaalen, M.; Shavers, M.; Semones, E.; Dodge, C.; Bolch, W.

    2010-01-01

    The estimate of absorbed dose to individual organs of a space crewmember is affected by the geometry of the anatomical model of the astronaut used in the radiation transport calculation. For astronaut dosimetry, NASA currently uses the computerized anatomical male (CAM) and computerized anatomical female (CAF) stylized phantoms to represent astronauts in its operational radiation dose analyses. These phantoms are available in one size and in two body positions. In contrast, the UF Hybrid Adult Male and Female (UFHADM and UFHADF) phantoms have organ shapes based on actual CT data. The surfaces of these phantoms are defined by non-uniform rational B-spline surfaces, and are thus flexible in terms of body morphometry and extremity positioning. In this study, UFHADM and UFHADF are scaled to dimensions corresponding to 5th, 50th, and 95th percentile (PCTL) male and female astronauts. A ray-tracing program is written in Visual Basic 2008, which is then used to create areal density maps for dose points corresponding to various organs within the phantoms. The areal density maps, along with appropriate space radiation spectra, are input into the NASA program couplet HZETRN/BRYNTRN, and organ doses are calculated. The areal density maps selected tissues and organs of the 5th, 50th, and 95th PCTL male and female phantoms are presented and compared. In addition, the organ doses for the 5th, 50th, and 95th PCTL male and female phantoms are presented and compared to organ doses for CAM and CAF.

  13. FOREWORD: The 5th International Colloquium on Atomic Spectra and Oscillator Strengths for Astrophysical and Laboratory Plasmas

    NASA Astrophysics Data System (ADS)

    Tchang-Brillet, Wad Lydia; Wyart, Jean-François; Zeippen, Claude

    1996-01-01

    The 5th International Colloquium on Atomic Spectra and Oscillator Strengths for Astrophysical and Laboratory Plasmas was held in Meudon, France, from August 28 to 31 1995. It was the fifth in a series started by the Atomic Spectroscopic Group at the University of Lund, Sweden, in 1983. Then followed the meetings in Toledo, USA, Amsterdam, The Nether- lands and Gaithersburg, USA, with a three year period. The original title of the series ended with "... for Astrophysics and Fusion Research" and became more general with the 4th colloquium in Gaithersburg. The purpose of the present meeting was, in line with tradition, to bring together "producers" and "users" of atomic data so as to ensure optimal coordination. Atomic physicists who study the structure of atoms and their radiative and collisional properties were invited to explain the development of their work, emphasizing the possibilities of producing precise transition wavelengths and relative line intensities. Astrophysicists and laboratory plasma physicists were invited to review their present research interests and the context in which atomic data are needed. The number of participants was about 70 for the first three meetings, then exploded to 170 at Gaithersburg. About 140 participants, coming from 13 countries, attended the colloquium in Meudon. This large gathering was partly due to a number of participants from Eastern Europe larger than in the past, and it certainly showed a steady interest for interdisciplinary exchanges between different communities of scientists. This volume includes all the invited papers given at the conference and, in the appendix, practical information on access to some databases. All invited speakers presented their talks aiming at good communication between scientists from different backgrounds. A separate bound volume containing extended abstracts of the poster papers has been published by the Publications de l'Observatoire de Paris, (Meudon 1996), under the responsibility of

  14. A Comparison of In-Channel Dead Zone and Hyporheic Zone Transient Storage Parameter Estimates Between a 1st and 5th Order Stream

    NASA Astrophysics Data System (ADS)

    Briggs, M.; Gooseff, M.; Morkeski, K.; Wollheim, W.; Hopkinson, C.; Peterson, B.; Vorosmarty, C.

    2007-12-01

    A major enhancement to our understanding of how watersheds function would be the ability to discriminate between in-channel dead zone ( DZ) and hyporheic zone ( HZ) transient storage, and an evaluation of how these properties scale across stream orders. The nature of DZ storage is to display faster exchange rates with the main channel and less overall sediment contact time than HZ storage. These differences have great significance to many in-stream processes such as nutrient cycling. The combination of high slope, coarse bed material and fluvial structure endemic to many 1st order streams can provide greater forcing of hyporheic flow paths than occurs within the lower gradient 5th order streams. Conversely many 5th order reaches exhibit large side pool and back eddy DZ areas not common along 1st order streams. This study builds on existing methods to delineate the DZ and HZ from the integrated signal of a conservative solute's breakthrough curve ( BTC). Data for this comparison were collected over the summer of 2007 within the Ipswich River watershed, a basin which drains into Plum Island Sound on the north shore of Massachusetts, USA. The conservative solute NaCl was injected into both a 1st order medium gradient stream and a 5th order low gradient stream. The BTCs collected in thalwegs from the NaCl injections were simulated using a version of the solute transport model OTIS containing two zones of transient storage. Hydrometric measurements of stream velocity were used to estimate average main channel cross sectional area ( A) and DZ cross sectional area ( ASDZ) for each reach to constrain parameter estimates and avoid model equifinality between the storage zones. Initial values for the exchange rate between main channel flow and DZ storage ( αDZ) were estimated from DZ BTCs. Our results indicate that although the overall storage zone is much larger in proportion to the main channel for the 1st order reach than for the 5th order reach, the percentage of median

  15. Regularized Generalized Canonical Correlation Analysis

    ERIC Educational Resources Information Center

    Tenenhaus, Arthur; Tenenhaus, Michel

    2011-01-01

    Regularized generalized canonical correlation analysis (RGCCA) is a generalization of regularized canonical correlation analysis to three or more sets of variables. It constitutes a general framework for many multi-block data analysis methods. It combines the power of multi-block data analysis methods (maximization of well identified criteria) and…

  16. 75 FR 53966 - Regular Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-02

    ... CORPORATION Regular Meeting AGENCY: Farm Credit System Insurance Corporation Board. SUMMARY: Notice is hereby given of the regular meeting of the Farm Credit System Insurance Corporation Board (Board). DATE AND TIME: The meeting of the Board will be held at the offices of the Farm Credit Administration in...

  17. Regularly timed events amid chaos.

    PubMed

    Blakely, Jonathan N; Cooper, Roy M; Corron, Ned J

    2015-11-01

    We show rigorously that the solutions of a class of chaotic oscillators are characterized by regularly timed events in which the derivative of the solution is instantaneously zero. The perfect regularity of these events is in stark contrast with the well-known unpredictability of chaos. We explore some consequences of these regularly timed events through experiments using chaotic electronic circuits. First, we show that a feedback loop can be implemented to phase lock the regularly timed events to a periodic external signal. In this arrangement the external signal regulates the timing of the chaotic signal but does not strictly lock its phase. That is, phase slips of the chaotic oscillation persist without disturbing timing of the regular events. Second, we couple the regularly timed events of one chaotic oscillator to those of another. A state of synchronization is observed where the oscillators exhibit synchronized regular events while their chaotic amplitudes and phases evolve independently. Finally, we add additional coupling to synchronize the amplitudes, as well, however in the opposite direction illustrating the independence of the amplitudes from the regularly timed events. PMID:26651759

  18. Computer aided inspection qualification

    NASA Astrophysics Data System (ADS)

    McNab, D.; McNab, A.; Potts, A.; Toft, M.; McDonald, J.

    2002-05-01

    Inspection Qualification under the ENIQ methodology uses a Technical Justification as a key element in assuring the performance of the inspection. It combines a mixture of physical reasoning and modeling linked to limited experimental trial data from identified worst-case defects, but the qualification process is costly and time-consuming. This paper describes an investigation into providing an integrated set of intelligent software tools to aid the process of inspection qualification.

  19. Waste Inspection Tomography (WIT)

    SciTech Connect

    Bernardi, R.T.; Han, Kyung S.

    1994-11-01

    This article describes the Waste Inspection Tomography Program. The program provides an inspection system that offers the nuclear waste evaluator a unique combination of tools for regulatory-driven characterization of low-level waste, transuranic waste, and mixed waste drums. WIT provides nondestructive, noninvasive and environmentally safe inspections using x-ray and gamma ray technologies with reasonable cost and throughput. included are background information; project description; and results. 11 figs.

  20. Inline inspection of textured plastics surfaces

    NASA Astrophysics Data System (ADS)

    Michaeli, Walter; Berdel, Klaus

    2011-02-01

    This article focuses on the inspection of plastics web materials exhibiting irregular textures such as imitation wood or leather. They are produced in a continuous process at high speed. In this process, various defects occur sporadically. However, current inspection systems for plastics surfaces are able to inspect unstructured products or products with regular, i.e., highly periodic, textures, only. The proposed inspection algorithm uses the local binary pattern operator for texture feature extraction. For classification, semisupervised as well as supervised approaches are used. A simple concept for semisupervised classification is presented and applied for defect detection. The resulting defect-maps are presented to the operator. He assigns class labels that are used to train the supervised classifier in order to distinguish between different defect types. A concept for parallelization is presented allowing the efficient use of standard multicore processor PC hardware. Experiments with images of a typical product acquired in an industrial setting show a detection rate of 97% while achieving a false alarm rate below 1%. Real-time tests show that defects can be reliably detected even at haul-off speeds of 30 m/min. Further applications of the presented concept can be found in the inspection of other materials.

  1. Natural selection and mechanistic regularity.

    PubMed

    DesAutels, Lane

    2016-06-01

    In this article, I address the question of whether natural selection operates regularly enough to qualify as a mechanism of the sort characterized by Machamer, Darden, and Craver (2000). Contrary to an influential critique by Skipper and Millstein (2005), I argue that natural selection can be seen to be regular enough to qualify as an MDC mechanism just fine-as long as we pay careful attention to some important distinctions regarding mechanistic regularity and abstraction. Specifically, I suggest that when we distinguish between process vs. product regularity, mechanism-internal vs. mechanism-external sources of irregularity, and abstract vs. concrete regularity, we can see that natural selection is only irregular in senses that are unthreatening to its status as an MDC mechanism. PMID:26921876

  2. Optical fiber inspection system

    DOEpatents

    Moore, F.W.

    1985-04-05

    A remote optical inspection system including an inspection head. The inspection head has a passageway through which pellets or other objects are passed. A window is provided along the passageway through which light is beamed against the objects being inspected. A plurality of lens assemblies are arranged about the window so that reflected light can be gathered and transferred to a plurality of coherent optical fiber light guides. The light guides transfer the light images to a television or other image transducer which converts the optical images into a representative electronic signal. The electronic signal can then be displayed on a signal viewer such as a television monitor for inspection by a person. A staging means can be used to support the objects for viewing through the window. Routing means can be used to direct inspected objects into appropriate exit passages for accepted or rejected objects. The inspected objects are advantageously fed in a singular manner to the staging means and routing means. The inspection system is advantageously used in an enclosure when toxic or hazardous materials are being inspected. 10 figs.

  3. Optical fiber inspection system

    DOEpatents

    Moore, Francis W.

    1987-01-01

    A remote optical inspection system including an inspection head. The inspection head has a passageway through which pellets or other objects are passed. A window is provided along the passageway through which light is beamed against the objects being inspected. A plurality of lens assemblies are arranged about the window so that reflected light can be gathered and transferred to a plurality of coherent optical fiber light guides. The light guides transfer the light images to a television or other image transducer which converts the optical images into a representative electronic signal. The electronic signal can then be displayed on a signal viewer such as a television monitor for inspection by a person. A staging means can be used to support the objects for viewing through the window. Routing means can be used to direct inspected objects into appropriate exit passages for accepted or rejected objects. The inspected objects are advantageously fed in a singular manner to the staging means and routing means. The inspection system is advantageously used in an enclosure when toxic or hazardous materials are being inspected.

  4. Fire Prevention Inspection Procedures.

    ERIC Educational Resources Information Center

    Pribyl, Paul F.

    Lesson plans are provided for a fire prevention inspection course of the Wisconsin Fire Service Training program. Objectives for the course are to enable students to describe and conduct fire prevention inspections, to identify and correct hazards common to most occupancies, to understand the types of building construction and occupancy, and to…

  5. Changing Classrooms through Inspection.

    ERIC Educational Resources Information Center

    Chapman, Christopher

    2001-01-01

    Reports findings from a preliminary study evaluating effects of the UK's Office for Standards in Education inspections on classroom change, based on teachers' perceptions, responses, and intentions to change practice (resulting from the inspection process) at five comprehensive secondary schools. School context and culture figure prominently.…

  6. PREFACE: 5th Symposium on Large TPCs for Low Energy Rare Event Detection and Workshop on Neutrinos from Supernovae

    NASA Astrophysics Data System (ADS)

    Irastorza, Igor G.; Scholberg, Kate; Colas, Paul; Giomataris, Ioannis

    2011-08-01

    The Fifth International Symposium on large TPCs for low-energy rare-event detection was held at the auditorium of the Astroparticle and Cosmology (APC) Laboratory in Paris, on 14-17 December 2010. As for all previous meetings, always held in Paris in 2008, 2006, 2004 and 2002, it brought together a significant community of physicists involved in rare event searches and/or development of time projection chambers (TPCs). As a novelty this year, the meeting was extended with two half-day sessions on Supernova physics. These proceedings also include the contributions corresponding to the supernova sessions. The purpose of the meeting was to present and discuss the status of current experiments or projects involving the use of TPCs to search for rare events, like low-energy neutrinos, double beta decay, dark matter or axion experiments, as well as to discuss new results and ideas in the framework of the last developments of Micro Pattern Gaseous Detectors (MPGD), and how these are being - or could be - applied to these searches. As in previous meetings in this series, the format included an informal program with some recent highlighted results, rather than exhaustive reviews, with time for discussion and interaction. The symposium, the fifth of the series, is becoming consolidated as a regular meeting place for the synergic interplay between the fields of rare events and TPC development. The meeting started with a moving tribute by Ioannis Giomataris to the memory of George Charpak, who recently passed away. We then moved on to the usual topics like the status of some low-energy neutrino physics and double beta decay experiments, dark matter experiments with directional detectors, axion searches, or development results. A relevant subject this time was the electroluminescence in Xe TPCs, covered by several speakers. Every time the conference program is enriched with original slightly off-topic contributions that trigger the curiosity and stimulate further thought. As

  7. (S)Partners for Heart Health: a school-based program for enhancing physical activity and nutrition to promote cardiovascular health in 5th grade students

    PubMed Central

    Carlson, Joseph J; Eisenmann, Joey C; Pfeiffer, Karin A; Jager, Kathleen B; Sehnert, Scott T; Yee, Kimbo E; Klavinski, Rita A; Feltz, Deborah L

    2008-01-01

    Background The American Heart Association Position Statement on Cardiovascular Health Promotion in Public Schools encourages school-based interventions for the primary prevention of cardiovascular disease (CVD) through risk factor prevention or reduction in children with an emphasis on creating an environment that promotes healthy food choices and physical activity (PA). In an effort to address issues related to CVD risk factors including obesity in Michigan children, a multi-disciplinary team of Michigan State University (MSU) faculty, clinicians, and health profession students was formed to "(S)partner" with elementary school physical education (PE) teachers and MSU Extension staff to develop and implement a cost-effective, sustainable program aimed at CVD risk factor prevention and management for 5th grade students. This (S)partnership is intended to augment and improve the existing 5th grade PE, health and nutrition curriculum by achieving the following aims: 1) improve the students' knowledge, attitudes and confidence about nutrition, PA and heart health; 2) increase the number of students achieving national recommendations for PA and nutrition; and 3) increase the number of students with a desirable CVD risk factor status based on national pediatric guidelines. Secondary aims include promoting school staff and parental support for heart health to help children achieve their goals and to provide experiential learning and service for MSU health profession students for academic credit. Methods/Design This pilot effectiveness study was approved by the MSU IRB. At the beginning and the end of the school year students undergo a CVD risk factor assessment conducted by MSU medical students and graduate students. Key intervention components include eight lesson plans (conducted bi-monthly) designed to promote heart healthy nutrition and PA behaviors conducted by PE teachers with assistance from MSU undergraduate dietetic and kinesiology students (Spartners). The final

  8. Routing cancer immunology and immunotherapy from the lab to the clinic 4–5 th March 2014, Center for Applied Medical Research and University Clinic, Pamplona, Spain

    PubMed Central

    2014-01-01

    New approaches to generate effective anticancer responses by either inducing immune responses or inhibiting immunosuppression are under development to improve efficacy in patients. On March 4-5th, 2014, a symposium was held in Pamplona, Spain, to report the new strategies showing preclinical and clinical results regarding translational research efforts on the topic. Participants interacted through oral presentations of 15 speakers and further discussions on topics that included novel therapeutic agents for cancer immunotherapy, viral vectors and interferon-based approaches, experimental tumor imaging and immunostimulatory monoclonal antibodies. Promising agents to target cancer cells and therapeutic approaches that are under translation from bench to patients were presented. PMID:25060862

  9. Automatic method for inspecting plywood shear samples

    NASA Astrophysics Data System (ADS)

    Avent, R. R., III; Conners, Richard W.

    1991-03-01

    A plywood panel is composed of several layers of wood bonded together by glue. The adhesive integrity of the glue formulation employed must surpass the structural integrity of wood used to make the panel. The American Plywood Association (APA) regularly tests plywood from manufacturing plants to ensure that this performance requirement is met. One of the procedures used is to saw a panel into a number of 1 X 3- 1/4 inch blocks called samples. These samples are then subjected to a number of treatments to simulate natural aging. The treated samples are then sheared into two halves. A 1 X 1 inch area on each of the two halves is then visually inspected to determine the percent wood failure that occurred during the shear. Roughly speaking a region of solid wood or a region of wood fibers embedded in glue is considered to be a region of wood failure while a region of glue is considered to be a region of glue failure. If the percent wood failure of sample from a significant number or panels from a plant is too low, the right to use the APA trademarks is withdrawn. The number of samples inspected annually by the APA is in the millions. The human inspectors are well trained, typically having years of experience, and are regularly tested. As in any human endeavor, the inspectors are subject to fatigue, boredom, etc. For these and other reasons an automatic inspection system could aid the APA in better performing its regulatory role.

  10. NONCONVEX REGULARIZATION FOR SHAPE PRESERVATION

    SciTech Connect

    CHARTRAND, RICK

    2007-01-16

    The authors show that using a nonconvex penalty term to regularize image reconstruction can substantially improve the preservation of object shapes. The commonly-used total-variation regularization, {integral}|{del}u|, penalizes the length of the object edges. They show that {integral}|{del}u|{sup p}, 0 < p < 1, only penalizes edges of dimension at least 2-p, and thus finite-length edges not at all. We give numerical examples showing the resulting improvement in shape preservation.

  11. Geometric continuum regularization of quantum field theory

    SciTech Connect

    Halpern, M.B. . Dept. of Physics)

    1989-11-08

    An overview of the continuum regularization program is given. The program is traced from its roots in stochastic quantization, with emphasis on the examples of regularized gauge theory, the regularized general nonlinear sigma model and regularized quantum gravity. In its coordinate-invariant form, the regularization is seen as entirely geometric: only the supermetric on field deformations is regularized, and the prescription provides universal nonperturbative invariant continuum regularization across all quantum field theory. 54 refs.

  12. Regular patterns stabilize auditory streams.

    PubMed

    Bendixen, Alexandra; Denham, Susan L; Gyimesi, Kinga; Winkler, István

    2010-12-01

    The auditory system continuously parses the acoustic environment into auditory objects, usually representing separate sound sources. Sound sources typically show characteristic emission patterns. These regular temporal sound patterns are possible cues for distinguishing sound sources. The present study was designed to test whether regular patterns are used as cues for source distinction and to specify the role that detecting these regularities may play in the process of auditory stream segregation. Participants were presented with tone sequences, and they were asked to continuously indicate whether they perceived the tones in terms of a single coherent sequence of sounds (integrated) or as two concurrent sound streams (segregated). Unknown to the participant, in some stimulus conditions, regular patterns were present in one or both putative streams. In all stimulus conditions, participants' perception switched back and forth between the two sound organizations. Importantly, regular patterns occurring in either one or both streams prolonged the mean duration of two-stream percepts, whereas the duration of one-stream percepts was unaffected. These results suggest that temporal regularities are utilized in auditory scene analysis. It appears that the role of this cue lies in stabilizing streams once they have been formed on the basis of simpler acoustic cues. PMID:21218898

  13. Extended Locus of Regular Nuclei

    SciTech Connect

    Amon, L.; Casten, R. F.

    2007-04-23

    A new family of IBM Hamiltonians, characterized by certain parameter values, was found about 15 years ago by Alhassid and Whelan to display almost regular dynamics, and yet these solutions to the IBM do not belong to any of the known dynamical symmetry limits (vibrational, rotational and {gamma} - unstable). Rather, they comprise an 'Arc of Regularity' cutting through the interior of the symmetry triangle from U(5) to SU(3) where suddenly there is a decrease in chaoticity and a significant increase in regularity. A few years ago, the first set of nuclei lying along this arc was discovered. The purpose of the present work is to search more broadly in the nuclear chart at all nuclei from Z = 40 - 100 for other examples of such 'regular' nuclei. Using a unique signature for such nuclei involving energy differences of certain excited states, we have identified an additional set of 12 nuclei lying near or along the arc. Some of these nuclei are known to have low-lying intruder states and therefore care must be taken, however, in judging their structure. The regularity exhibited by nuclei near the arc presumably reflects the validity or partial validity of some new, as yet unknown, quantum number describing these systems and giving the regularity found for them.

  14. 46 CFR 164.009-23 - Factory inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Factory inspection. 164.009-23 Section 164.009-23...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-23 Factory... regular schedule. However, the Commander of the Coast Guard District in which a factory is located...

  15. 46 CFR 164.009-23 - Factory inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Factory inspection. 164.009-23 Section 164.009-23...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-23 Factory... regular schedule. However, the Commander of the Coast Guard District in which a factory is located...

  16. 46 CFR 164.009-23 - Factory inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Factory inspection. 164.009-23 Section 164.009-23...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-23 Factory... regular schedule. However, the Commander of the Coast Guard District in which a factory is located...

  17. 46 CFR 164.009-23 - Factory inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Factory inspection. 164.009-23 Section 164.009-23...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-23 Factory... regular schedule. However, the Commander of the Coast Guard District in which a factory is located...

  18. 46 CFR 164.009-23 - Factory inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Factory inspection. 164.009-23 Section 164.009-23...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-23 Factory... regular schedule. However, the Commander of the Coast Guard District in which a factory is located...

  19. 49 CFR 1248.6 - Public inspection-railroad reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... STATISTICS § 1248.6 Public inspection—railroad reports. The individual commodity statistics reports of class... public inspection, and such required commodity statistics reports, to be filed for the years beginning..., may be excluded from a railroad's regular freight commodity statistics report and filed in...

  20. EDITORIAL: Artificial Muscles: Selected papers from the 5th World Congress on Biomimetics, Artificial Muscles and Nano-Bio (Osaka, Japan, 25-27 November 2009) Artificial Muscles: Selected papers from the 5th World Congress on Biomimetics, Artificial Muscles and Nano-Bio (Osaka, Japan, 25-27 November 2009)

    NASA Astrophysics Data System (ADS)

    Shahinpoor, Mohsen

    2011-12-01

    The 5th World Congress on Biomimetics, Artificial Muscles and Nano-Bio and the 4th International Conference on Artificial Muscles were held in Osaka, Japan, 23-27 November 2009. This special section of Smart Materials and Structures is devoted to a selected number of research papers presented at this international conference and congress. Of the 76 or so papers presented at the conference, only 10 papers were finally selected, reviewed and accepted for this special section, following the regular reviewing procedures of the journal. This special section is focused on polymeric artificial muscles, electroactive polymers, multifunctional nanocomposites and their applications. In particular, an electromechanical model for self-sensing ionic polymer-metal composite actuating devices with patterned surface electrodes is presented which discusses the concept of creating self-sensing ionic polymer-metal composite (IPMC) actuating devices with patterned surface electrodes where actuator and sensor elements are separated by a grounded shielding electrode. Eventually, an electromechanical model of the device is also proposed and validated. Following that, there is broad coverage of polytetrahydrofurane-polyethylene oxide-PEDOT conducting interpenetrating polymer networks (IPNs) for high speed actuators. The conducting polymer (poly(3,4-ethylenedioxythiophene)) is incorporated within the IPNs, which are synthesized from polyethylene oxide (PEO)/polytetrahydrofurane (PTHF) networks. PEO/PTHF IPNs are prepared using poly(ethylene glycol) methacrylate and dimethacrylate and hydroxythelechelic PTHF as starting materials. The conducting IPN actuators are prepared by oxidative polymerization of 3,4-ethylenedioxithiophene (EDOT) using FeCl3 as an oxidizing agent within the PEO/PTHF IPN host matrix. Subsequently, giant and reversible magnetorheology of carrageenan/iron oxide magnetic gels are discussed and the effect of magnetic fields on the viscoelastic properties

  1. Using a Spreadsheet to Compute the Maximum Wind Sector 99.5th Percentile X/Q Value in Accordance with DOE-STD-3009-2014.

    PubMed

    Vickers, Linda

    2016-05-01

    The U.S. Department of Energy Standard 3009-2014 requires one of two methods to determine the simple Gaussian relative concentration (X/Q) of pollutant at plume centerline downwind to a receptor for a 2-h exposure duration from a ground-level release (i.e., less than 10 m height) which are (1) the 99.5th percentile X/Q for the directionally-dependent method and (2) the 95th percentile X/Q for the directionally-independent method. This paper describes how to determine the simple Gaussian 99.5th percentile X/Q for the directionally-dependent method using an electronic spreadsheet. Refer to a previous paper to determine the simple Gaussian 95th percentile X/Q for the directionally-independent method using an electronic spreadsheet (Vickers 2015). The method described herein is simple, quick, accurate, and transparent because all of the data, calculations, and results are visible for validation and verification. PMID:27023153

  2. The 5th IUPAP International Conference on Women in Physics: Making progress in the number of women in physics around the world

    NASA Astrophysics Data System (ADS)

    Cunningham, Beth

    2015-04-01

    A short report on the 5th IUPAP International Conference on Women in Physics (ICWIP) will be presented. In particular, a summary of the structure of the 5th ICWIP that occurred in Waterloo, Canada in August 2014 will be provided and placed into context of the previous four conferences. In addition, a synopsis of the recent efforts that are happening around the world to encourage girls and women to participate in physics will be given. Several US projects have been very successful in introducing girls to science and physics (e.g., ``Expanding Your Horizons'' intervention) and encouraging undergraduate women physics majors to continue into physics careers (e.g., Conferences for Undergraduate Women in Physics). Projects from other countries, such as the Juno Project in the UK that rates physics departments on their climate for women, might be implemented by US physics professional societies as well as colleges and universities. Several projects originating from the conference will be described: the new ``HERstories: Encouraging words from women in physics'' video based on interviews with delegates of the Conference, the My STEM Story project (http://mystemstory.wlu.ca), and the proceedings of the conference. Partial support provided by NSF #PHY-1419453.

  3. Apparatus for inspecting piping

    DOEpatents

    Zollingger, W.T.; Appel, D.K.; Park, L.R.

    1995-03-21

    An inspection rabbit is described for inspecting piping systems having severe bends therein. The rabbit consists of a flexible, modular body containing a miniaturized eddy current inspection probe, a self-contained power supply for proper operation of the rabbit, an outer surface that allows ease of movement through piping systems and means for transmitting data generated by the inspection device. The body is preferably made of flexible polyvinyl chloride (PVC) tubing or, alternatively, silicone rubber with a shrink wrapping of polytetrafluoroethylene (TEFLON{trademark}). The body is formed to contain the power supply, preferably a plurality of batteries, and a spool of communication wire that connects to a data processing computer external to the piping system. 6 figures.

  4. Apparatus for inspecting piping

    DOEpatents

    Zollingger, W. Thor; Appel, D. Keith; Park, Larry R.

    1995-01-01

    An inspection rabbit for inspecting piping systems having severe bends therein. The rabbit consists of a flexible, modular body containing a miniaturized eddy current inspection probe, a self-contained power supply for proper operation of the rabbit, an outer surface that allows ease of movement through piping systems and means for transmitting data generated by the inspection device. The body is preferably made of flexible polyvinyl chloride (PVC) tubing or, alternatively, silicone rubber with a shrink wrapping of polytetrafluoroethylene (TEFLON.RTM.). The body is formed to contain the power supply, preferably a plurality of batteries, and a spool of communication wire that connects to a data processing computer external to the piping system.

  5. Guidelines for software inspections

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Quality control inspections are software problem finding procedures which provide defect removal as well as improvements in software functionality, maintenance, quality, and development and testing methodology is discussed. The many side benefits include education, documentation, training, and scheduling.

  6. Nuclear Plant Inspection

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Engineers from the Power Authority of the State of New York use a Crack Growth Analysis Program supplied by COSMIC (Computer Software Management and Information Center) in one stage of nuclear plant inspection. Welds of the nuclear steam supply system are checked for cracks; radiographs, dye penetration and visual inspections are performed to locate cracks in the metal structure and welds. The software package includes three separate crack growth analysis models and enables necessary repairs to be planned before serious problems develop.

  7. Wedges for ultrasonic inspection

    DOEpatents

    Gavin, Donald A.

    1982-01-01

    An ultrasonic transducer device is provided which is used in ultrasonic inspection of the material surrounding a threaded hole and which comprises a wedge of plastic or the like including a curved threaded surface adapted to be screwed into the threaded hole and a generally planar surface on which a conventional ultrasonic transducer is mounted. The plastic wedge can be rotated within the threaded hole to inspect for flaws in the material surrounding the threaded hole.

  8. Source Inspection Scheduling Calendar

    NASA Technical Reports Server (NTRS)

    Hollis, Brayden

    2011-01-01

    Quality is an essential component for creating flight hardware travelling through space since the hardware is extremely expensive and cannot be reworked or repaired once launched. An important step in this process is ensuring the quality of hardware procured from Jet Propulsion Laboratory's (JPL) suppliers. An important element of determining supplier quality is source inspection. Source inspections are performed at suppliers' facilities by JPL employeesto ensure that hardware characteristics are acceptable before being covered up and/or delivered to JPL.

  9. Regularization Analysis of SAR Superresolution

    SciTech Connect

    DELAURENTIS,JOHN M.; DICKEY,FRED M.

    2002-04-01

    Superresolution concepts offer the potential of resolution beyond the classical limit. This great promise has not generally been realized. In this study we investigate the potential application of superresolution concepts to synthetic aperture radar. The analytical basis for superresolution theory is discussed. In a previous report the application of the concept to synthetic aperture radar was investigated as an operator inversion problem. Generally, the operator inversion problem is ill posed. This work treats the problem from the standpoint of regularization. Both the operator inversion approach and the regularization approach show that the ability to superresolve SAR imagery is severely limited by system noise.

  10. Dimensional regularization in configuration space

    SciTech Connect

    Bollini, C.G. |; Giambiagi, J.J.

    1996-05-01

    Dimensional regularization is introduced in configuration space by Fourier transforming in {nu} dimensions the perturbative momentum space Green functions. For this transformation, the Bochner theorem is used; no extra parameters, such as those of Feynman or Bogoliubov and Shirkov, are needed for convolutions. The regularized causal functions in {ital x} space have {nu}-dependent moderated singularities at the origin. They can be multiplied together and Fourier transformed (Bochner) without divergence problems. The usual ultraviolet divergences appear as poles of the resultant analytic functions of {nu}. Several examples are discussed. {copyright} {ital 1996 The American Physical Society.}

  11. Identifying Cognitive States Using Regularity Partitions

    PubMed Central

    2015-01-01

    Functional Magnetic Resonance (fMRI) data can be used to depict functional connectivity of the brain. Standard techniques have been developed to construct brain networks from this data; typically nodes are considered as voxels or sets of voxels with weighted edges between them representing measures of correlation. Identifying cognitive states based on fMRI data is connected with recording voxel activity over a certain time interval. Using this information, network and machine learning techniques can be applied to discriminate the cognitive states of the subjects by exploring different features of data. In this work we wish to describe and understand the organization of brain connectivity networks under cognitive tasks. In particular, we use a regularity partitioning algorithm that finds clusters of vertices such that they all behave with each other almost like random bipartite graphs. Based on the random approximation of the graph, we calculate a lower bound on the number of triangles as well as the expectation of the distribution of the edges in each subject and state. We investigate the results by comparing them to the state of the art algorithms for exploring connectivity and we argue that during epochs that the subject is exposed to stimulus, the inspected part of the brain is organized in an efficient way that enables enhanced functionality. PMID:26317983

  12. The 5th National Audit Project (NAP5) on accidental awareness during general anaesthesia: summary of main findings and risk factors.

    PubMed

    Pandit, J J; Andrade, J; Bogod, D G; Hitchman, J M; Jonker, W R; Lucas, N; Mackay, J H; Nimmo, A F; O'Connor, K; O'Sullivan, E P; Paul, R G; Palmer, J H MacG; Plaat, F; Radcliffe, J J; Sury, M R J; Torevell, H E; Wang, M; Hainsworth, J; Cook, T M

    2014-10-01

    We present the main findings of the 5th National Audit Project on accidental awareness during general anaesthesia. Incidences were estimated using reports of accidental awareness as the numerator, and a parallel national anaesthetic activity survey to provide denominator data. The incidence of certain/probable and possible accidental awareness cases was ~1:19 600 anaesthetics (95% CI 1:16 700-23 450). However, there was considerable variation across subtypes of techniques or subspecialties. The incidence with neuromuscular blockade was ~1:8200 (1:7030-9700), and without it was ~1:135 900 (1:78 600-299 000). The cases of accidental awareness during general anaesthesia reported to 5th National Audit Project were overwhelmingly cases of unintended awareness during neuromuscular blockade. The incidence of accidental awareness during caesarean section was ~1:670 (1:380-1300). Two thirds (82, 66%) of cases of accidental awareness experiences arose in the dynamic phases of anaesthesia, namely induction of and emergence from anaesthesia. During induction of anaesthesia, contributory factors included: use of thiopental; rapid sequence induction; obesity; difficult airway management; neuromuscular blockade; and interruptions of anaesthetic delivery during movement from anaesthetic room to theatre. During emergence from anaesthesia, residual paralysis was perceived by patients as accidental awareness, and commonly related to a failure to ensure full return of motor capacity. One third (43, 33%) of accidental awareness events arose during the maintenance phase of anaesthesia, most due to problems at induction or towards the end of anaesthesia. Factors increasing the risk of accidental awareness included: female sex; age (younger adults, but not children); obesity; anaesthetist seniority (junior trainees); previous awareness; out-of-hours operating; emergencies; type of surgery (obstetric, cardiac, thoracic); and use of neuromuscular blockade. The following factors were

  13. 46 CFR 176.818 - Sanitary inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Sanitary inspection. 176.818 Section 176.818 Shipping...) INSPECTION AND CERTIFICATION Material Inspections § 176.818 Sanitary inspection. At each inspection for... sanitary condition....

  14. 46 CFR 176.818 - Sanitary inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Sanitary inspection. 176.818 Section 176.818 Shipping...) INSPECTION AND CERTIFICATION Material Inspections § 176.818 Sanitary inspection. At each inspection for... sanitary condition....

  15. Inspection of surveillance activities and administrative leave policy at Bonneville Power Administration, Portland, Oregon

    SciTech Connect

    Not Available

    1994-04-01

    The authors conducted an inspection of surveillance activities and administrative leave policy at the Bonneville Power Administration, Portland, Oregon. The purpose of their inspection was to determine if a covert video surveillance operation conducted at Bonneville Power Administration was consistent with Department of Energy policies and procedures and other applicable regulations and procedures, and to determine if administrative leave policies and procedures used at Bonneville Power Administration in a specific instance were consistent with Department of Energy requirements and the Code of Federal Regulations. This inspection focused on a specific incident that occurred in 1989 on the 5th floor of the BPA Headquarters Building located in Portland, Oregon. The incident involved the soiling of an employee`s personal property with what appeared to be urine.

  16. Comparison of Values in 5th, 6th, 7th and 8th Grade Primary Education Music Class Students'? Workbooks According to Rokeach?s and Akbas's Value Classifications

    ERIC Educational Resources Information Center

    Çakirer, H. Serdar

    2014-01-01

    The aim of the present study is to compare the values in the songs of 5th, 6th, 7th and 8th grade primary education music classes students? workbooks according to the value categorizations proposed by Rockeach and Akbas and which values among the categories mentioned are taught to the students in the 5th, 6th, 7th and 8th grade primary education…

  17. Rotations of the Regular Polyhedra

    ERIC Educational Resources Information Center

    Jones, MaryClara; Soto-Johnson, Hortensia

    2006-01-01

    The study of the rotational symmetries of the regular polyhedra is important in the classroom for many reasons. Besides giving the students an opportunity to visualize in three dimensions, it is also an opportunity to relate two-dimensional and three-dimensional concepts. For example, rotations in R[superscript 2] require a point and an angle of…

  18. Regularized Generalized Structured Component Analysis

    ERIC Educational Resources Information Center

    Hwang, Heungsun

    2009-01-01

    Generalized structured component analysis (GSCA) has been proposed as a component-based approach to structural equation modeling. In practice, GSCA may suffer from multi-collinearity, i.e., high correlations among exogenous variables. GSCA has yet no remedy for this problem. Thus, a regularized extension of GSCA is proposed that integrates a ridge…

  19. Academic Improvement through Regular Assessment

    ERIC Educational Resources Information Center

    Wolf, Patrick J.

    2007-01-01

    Media reports are rife with claims that students in the United States are overtested and that they and their education are suffering as result. Here I argue the opposite--that students would benefit in numerous ways from more frequent assessment, especially of diagnostic testing. The regular assessment of students serves critical educational and…

  20. Using Community-based Participatory Research to Adapt keepin’ it REAL: Creating a Socially, Developmentally, and Academically Appropriate Prevention Curriculum for 5th Graders

    PubMed Central

    Harthun, Mary L.; Dustman, Patricia A.; Reeves, Leslie J.; Marsiglia, Flavio F.; Hecht, Michael L.

    2010-01-01

    This paper reports on a process in which program designers, classroom teachers, and students worked together to adapt the 7th grade “keepin’ it REAL” prevention curriculum to a developmentally, socially, and academically appropriate curriculum for 5th graders. A Community-Based Participatory Research methodology (CBPR), combined with a 9-step adaptation model, emphasized a collaborative approach, both transformative and empowering. Essential adaptation elements were the Risk-to-Resiliency Continuum; the teaching of a wide range of skills including risk assessment, decision making, and resistance strategies; and, maintaining the theoretical grounding of Narrative Theory, Communication Competence, and Focus Theory of Norms. This paper describes how CBPR methodology can be conducted successfully while focusing on sustained theoretical grounding and effective research practices in a school-based setting. PMID:21057596

  1. Investigation of the aerodynamic performance and noise characteristics of a 1/5th scale model of the Dowty Rotol R212 propeller

    NASA Astrophysics Data System (ADS)

    Trebble, W. J. G.

    1983-11-01

    The four-bladed Dowty Rotol R212 propeller (NACA 16 sections) was studied at 1/5th scale (0.7 m diameter) in 1.5 m acoustic tunnel. Propeller power absorption and thrust were measured over a range of rotational speeds up to 8000 rev/min at mainstream speeds from 15 to 60 m/sec for a range of blade settings. Slipstream wake surveys show outward movement of the position of the peak pressure as propeller loading is increased. Noise analysis demonstrates the predominance of multiple tones whose number and intensity increase with helical-tip Mach number. An empirical formula shows that the fundamental tone sound pressure level varies with tip speed and power loading in an identical manner to that observed on an ARA-D section propeller.

  2. [Synthesis of juvenile hormones in vitro by the corpora allata of 5th stage larva of Locusta migratoria migratorioides (R and F) (Insecta, Orthopteroida)].

    PubMed

    Caruelle, J P; Baehr, J C; Cassier, P

    1979-04-01

    Corpora allata of Locusta migratoria 5th stage larvae synthesize J.H.1, J.H.2 and J.H.3 in vitro. The C.A. of insects of different ages exbit different rates of J.H. synthesis. J.H.1 and J.H.2 synthesis is less than 1 ng/48 h/gland. During the same time the J.H.3 production may be as much as 25.6 ng/gland. J.H. synthetic activity is the same between right and left C.A. The release of J.H. from the C.A. occurs immediately following synthesis. These results are compared with in vivo haemolymphatic J.H. levels. PMID:113127

  3. Systematically frameshifting by deletion of every 4th or 4th and 5th nucleotides during mitochondrial transcription: RNA self-hybridization regulates delRNA expression.

    PubMed

    Seligmann, Hervé

    2016-01-01

    In mitochondria, secondary structures punctuate post-transcriptional RNA processing. Recently described transcripts match the human mitogenome after systematic deletions of every 4th, respectively every 4th and 5th nucleotides, called delRNAs. Here I explore predicted stem-loop hairpin formation by delRNAs, and their associations with delRNA transcription and detected peptides matching their translation. Despite missing 25, respectively 40% of the nucleotides in the original sequence, del-transformed sequences form significantly more secondary structures than corresponding randomly shuffled sequences, indicating biological function, independently of, and in combination with, previously detected delRNA and thereof translated peptides. Self-hybridization decreases delRNA abundances, indicating downregulation. Systematic deletions of the human mitogenome reveal new, unsuspected coding and structural informations. PMID:27018206

  4. Parasite-Antigen Driven Expansion of IL-5− and IL-5+ Th2 Human Subpopulations in Lymphatic Filariasis and Their Differential Dependence on IL-10 and TGFβ

    PubMed Central

    Anuradha, Rajamanickam; George, Parakkal Jovvian; Hanna, Luke E.; Chandrasekaran, Vedachalam; Kumaran, P. Paul; Nutman, Thomas B.; Babu, Subash

    2014-01-01

    Background Two different Th2 subsets have been defined recently on the basis of IL-5 expression – an IL-5+Th2 subset and an IL-5−Th2 subset in the setting of allergy. However, the role of these newly described CD4+ T cells subpopulations has not been explored in other contexts. Methods To study the role of the Th2 subpopulation in a chronic, tissue invasive parasitic infection (lymphatic filariasis), we examined the frequency of IL-5+IL-4+IL-13+ CD4+ T cells and IL-5−IL-4 IL-13+ CD4+ T cells in asymptomatic, infected individuals (INF) and compared them to frequencies (Fo) in filarial-uninfected (UN) individuals and to those with filarial lymphedema (CP). Results INF individuals exhibited a significant increase in the spontaneously expressed and antigen-induced Fo of both Th2 subpopulations compared to the UN and CP. Interestingly, there was a positive correlation between the Fo of IL-5+Th2 cells and the absolute eosinophil and neutrophil counts; in addition there was a positive correlation between the frequency of the CD4+IL-5−Th2 subpopulation and the levels of parasite antigen – specific IgE and IgG4 in INF individuals. Moreover, blockade of IL-10 and/or TGFβ demonstrated that each of these 2 regulatory cytokines exert opposite effects on the different Th2 subsets. Finally, in those INF individuals cured of infection by anti-filarial therapy, there was a significantly decreased Fo of both Th2 subsets. Conclusions Our findings suggest that both IL-5+ and IL-5−Th2 cells play an important role in the regulation of immune responses in filarial infection and that these two Th2 subpopulations may be regulated by different cytokine-receptor mediated processes. PMID:24498448

  5. Operator regularization and quantum gravity

    NASA Astrophysics Data System (ADS)

    Mann, R. B.; Tarasov, L.; Mckeon, D. G. C.; Steele, T.

    1989-01-01

    Operator regularization has been shown to be a symmetry preserving means of computing Green functions in gauge symmetric and supersymmetric theories which avoids the explicit occurrence of divergences. In this paper we examine how this technique can be applied to computing quantities in non-renormalizable theories in general and quantum gravity in particular. Specifically, we consider various processes to one- and two-loop order in φ4N theory for N > 4 for which the theory is non-renormalizable. We then apply operator regularization to determine the one-loop graviton correction to the spinor propagator. The effective action for quantum scalars in a background gravitational field is evaluated in operator regularization using both the weak-field method and the normal coordinate expansion. This latter case yields a new derivation of the Schwinger-de Witt expansion which avoids the use of recursion relations. Finally we consider quantum gravity coupled to scalar fields in n dimensions, evaluating those parts of the effective action that (in other methods) diverge as n → 4. We recover the same divergence structure as is found using dimensional regularization if n ≠ 4, but if n = 4 at the outset no divergence arises at any stage of the calculation. The non-renormalizability of such theories manifests itself in the scale-dependence at one-loop order of terms that do not appear in the original lagrangian. In all cases our regularization procedure does not break any invariances present in the theory and avoids the occurence of explicit divergences.

  6. Temporal regularity in speech perception: Is regularity beneficial or deleterious?

    PubMed Central

    Geiser, Eveline; Shattuck-Hufnagel, Stefanie

    2012-01-01

    Speech rhythm has been proposed to be of crucial importance for correct speech perception and language learning. This study investigated the influence of speech rhythm in second language processing. German pseudo-sentences were presented to participants in two conditions: ‘naturally regular speech rhythm’ and an ‘emphasized regular rhythm'. Nine expert English speakers with 3.5±1.6 years of German training repeated each sentence after hearing it once over headphones. Responses were transcribed using the International Phonetic Alphabet and analyzed for the number of correct, false and missing consonants as well as for consonant additions. The over-all number of correct reproductions of consonants did not differ between the two experimental conditions. However, speech rhythmicization significantly affected the serial position curve of correctly reproduced syllables. The results of this pilot study are consistent with the view that speech rhythm is important for speech perception. PMID:22701753

  7. Nuclear Electricity. 5th Edition.

    ERIC Educational Resources Information Center

    Hore-Lacy, Ian

    Educators must address the need for young people to be informed about both the scientific concepts and the reasons for controversy when dealing with controversial issues. Young people must be given the opportunity to form their own opinions when presented with evidence for conflicting arguments. Previous editions of "Nuclear Electricity" have…

  8. Environmental chemistry. 5th edition

    SciTech Connect

    Manahan, S.E. . Dept. of Chemistry)

    1991-01-01

    This book is organized around several major sections: aquatic Chemistry, atmospheric chemistry, the geosphere and hazardous wastes, toxicological chemistry, and resources and energy. Specific topics discussed in the book include a general introduction to environment chemistry, basic principles of aquatic chemistry, water pollution and water treatment, the essential role of microorganisms in aquatic chemical phenomena, atmospheric chemistry, a discussion of major threats to the global atmosphere (particularly greenhouse gases and ozone-depleting chemicals), the geosphere and hazardous substances, soil chemistry, and the nature and sources of hazardous wastes. The environmental chemistry of hazardous wastes, their treatment, minimization, and recycling, and the effects of these hazardous substances in also presented.

  9. Piping inspection round robin

    SciTech Connect

    Heasler, P.G.; Doctor, S.R.

    1996-04-01

    The piping inspection round robin was conducted in 1981 at the Pacific Northwest National Laboratory (PNNL) to quantify the capability of ultrasonics for inservice inspection and to address some aspects of reliability for this type of nondestructive evaluation (NDE). The round robin measured the crack detection capabilities of seven field inspection teams who employed procedures that met or exceeded the 1977 edition through the 1978 addenda of the American Society of Mechanical Engineers (ASME) Section 11 Code requirements. Three different types of materials were employed in the study (cast stainless steel, clad ferritic, and wrought stainless steel), and two different types of flaws were implanted into the specimens (intergranular stress corrosion cracks (IGSCCs) and thermal fatigue cracks (TFCs)). When considering near-side inspection, far-side inspection, and false call rate, the overall performance was found to be best in clad ferritic, less effective in wrought stainless steel and the worst in cast stainless steel. Depth sizing performance showed little correlation with the true crack depths.

  10. Spelling Pronunciations: Transforming Irregularity into Regularity

    ERIC Educational Resources Information Center

    Landerl, Karin; Thaler, Verena; Reitsma, Pieter

    2008-01-01

    In a 10-day training, the efficacy of spelling pronunciations on German speaking 5th-graders' spelling skills for irregular words was examined. Poor spellers were less efficient in learning the spelling pronunciations than age-adequate spellers. On post-tests, 1 week after the last training day and between 5 and 12 weeks after post-test 1, poor…

  11. Distributional Stress Regularity: A Corpus Study

    ERIC Educational Resources Information Center

    Temperley, David

    2009-01-01

    The regularity of stress patterns in a language depends on "distributional stress regularity", which arises from the pattern of stressed and unstressed syllables, and "durational stress regularity", which arises from the timing of syllables. Here we focus on distributional regularity, which depends on three factors. "Lexical stress patterning"…

  12. Advances in inspection automation

    NASA Astrophysics Data System (ADS)

    Weber, Walter H.; Mair, H. Douglas; Jansen, Dion; Lombardi, Luciano

    2013-01-01

    This new session at QNDE reflects the growing interest in inspection automation. Our paper describes a newly developed platform that makes the complex NDE automation possible without the need for software programmers. Inspection tasks that are tedious, error-prone or impossible for humans to perform can now be automated using a form of drag and drop visual scripting. Our work attempts to rectify the problem that NDE is not keeping pace with the rest of factory automation. Outside of NDE, robots routinely and autonomously machine parts, assemble components, weld structures and report progress to corporate databases. By contrast, components arriving in the NDT department typically require manual part handling, calibrations and analysis. The automation examples in this paper cover the development of robotic thickness gauging and the use of adaptive contour following on the NRU reactor inspection at Chalk River.

  13. IR Spot Weld Inspect

    SciTech Connect

    Chen, Jian; Feng, Zhili

    2014-01-01

    In automotive industry, destructive inspection of spot welds is still the mandatory quality assurance method due to the lack of efficient non-destructive evaluation (NDE) tools. However, it is costly and time-consuming. Recently at ORNL, a new NDE prototype system for spot weld inspection using infrared (IR) thermography has been developed to address this problem. This software contains all the key functions that ensure the NDE system to work properly: system input/output control, image acquisition, data analysis, weld quality database generation and weld quality prediction, etc.

  14. IR Spot Weld Inspect

    Energy Science and Technology Software Center (ESTSC)

    2014-01-01

    In automotive industry, destructive inspection of spot welds is still the mandatory quality assurance method due to the lack of efficient non-destructive evaluation (NDE) tools. However, it is costly and time-consuming. Recently at ORNL, a new NDE prototype system for spot weld inspection using infrared (IR) thermography has been developed to address this problem. This software contains all the key functions that ensure the NDE system to work properly: system input/output control, image acquisition, datamore » analysis, weld quality database generation and weld quality prediction, etc.« less

  15. Adaptive regularization of earthquake slip distribution inversion

    NASA Astrophysics Data System (ADS)

    Wang, Chisheng; Ding, Xiaoli; Li, Qingquan; Shan, Xinjian; Zhu, Jiasong; Guo, Bo; Liu, Peng

    2016-04-01

    Regularization is a routine approach used in earthquake slip distribution inversion to avoid numerically abnormal solutions. To date, most slip inversion studies have imposed uniform regularization on all the fault patches. However, adaptive regularization, where each retrieved parameter is regularized differently, has exhibited better performances in other research fields such as image restoration. In this paper, we implement an investigation into adaptive regularization for earthquake slip distribution inversion. It is found that adaptive regularization can achieve a significantly smaller mean square error (MSE) than uniform regularization, if it is set properly. We propose an adaptive regularization method based on weighted total least squares (WTLS). This approach assumes that errors exist in both the regularization matrix and observation, and an iterative algorithm is used to solve the solution. A weight coefficient is used to balance the regularization matrix residual and the observation residual. An experiment using four slip patterns was carried out to validate the proposed method. The results show that the proposed regularization method can derive a smaller MSE than uniform regularization and resolution-based adaptive regularization, and the improvement in MSE is more significant for slip patterns with low-resolution slip patches. In this paper, we apply the proposed regularization method to study the slip distribution of the 2011 Mw 9.0 Tohoku earthquake. The retrieved slip distribution is less smooth and more detailed than the one retrieved with the uniform regularization method, and is closer to the existing slip model from joint inversion of the geodetic and seismic data.

  16. Remote Inspection Challenge

    ERIC Educational Resources Information Center

    Roman, Harry T.

    2013-01-01

    The ability to remotely inspect equipment of an aging infrastructure is becoming of major interest to many industries. Often the ability to just get a look at a piece of critical equipment can yield very important information. With millions of miles of piping installed throughout the United States, this vast network is critical to oil, natural…

  17. Intelligent inspection system

    NASA Astrophysics Data System (ADS)

    May, Jeniece; Dale, Ken; Holloway, Mike; Gaby, Willard

    1997-01-01

    The intelligent inspection system is an advanced controller and analysis system for dimensional measuring machines dedicated to measuring surface of revolution mechanical parts. IIS was developed by the Lockheed Martin Energy Systems, Inc. Oak Ridge Y-12 plant because no commercial product was available to replace the obsolete computing systems on these important machines.

  18. Automatic Inspection During Machining

    NASA Technical Reports Server (NTRS)

    Ransom, Clyde L.

    1988-01-01

    In experimental manufacturing process, numerically-controlled machine tool temporarily converts into inspection machine by installing electronic touch probes and specially-developed numerical-control software. Software drives probes in paths to and on newly machined parts and collects data on dimensions of parts.

  19. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  20. 14 CFR 91.409 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... detail— (i) An explanation of the progressive inspection, including the continuity of inspection... the name and address of the person responsible for scheduling the inspections required by the...

  1. 14 CFR 91.409 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... detail— (i) An explanation of the progressive inspection, including the continuity of inspection... the name and address of the person responsible for scheduling the inspections required by the...

  2. Offshore observations of aftershocks following the January 5th 2013 Mw 7.5 Queen Charlotte-Fairweather fault earthquake, southeast Alaska

    NASA Astrophysics Data System (ADS)

    Roland, E. C.; Gulick, S. P.; Levoir, M. A.; Haeussler, P. J.

    2013-12-01

    We present initial results from a rapid-response ocean bottom seismometer (OBS) deployment that recorded aftershock activity on the Queen Charlotte-Fairweather (QC-F) fault following the Mw 7.5 earthquake on January 5th 2013 near Craig, Alaska. This earthquake was the second of two Mw > 7 events on this fault system in a 3 month time period; the Craig earthquake followed a Mw 7.8 thrust event that occurred in October 2012, west of Haida Gwaii, British Columbia. Although the QC-F is a major plate boundary fault, little is known about the regional fault structure, interseismic coupling, and rheological controls on the depth distribution of seismic slip along the continent-ocean transform. The majority of the QC-F fault system extends offshore western British Columbia and southeast Alaska, making it difficult to characterize earthquakes and fault deformation with land-based seismic and geodetic instruments. This experiment is the first ever offshore seismometer deployment to record earthquake activity along this northern segment of the QC-F system, and was set in motion with help from the US Coast Guard, who provided a vessel and crew to deploy and recover the OBS array on short notice. The seismic array utilized 6 GeoPro short period OBS from the University of Texas Institute for Geophysics, which recorded approximately 3 weeks of aftershock activity in April-May of 2013. Combining high-quality local OBS recordings with land-based seismic observations from Alaska Earthquake Information Center (AEIC) stations to the east, we present more precise aftershock locations and depths that help to better characterize fault zone architecture along the northern section of the QC-F. Although moment tensor solutions indicate that the January 5th mainshock sustained slip consistent with Pacific-North America plate motions, aftershock focal mechanisms indicate some interaction with neighboring faults, such as the Chatham Straight fault. This new OBS dataset will also help to

  3. The 5th National Audit Project (NAP5) on accidental awareness during general anaesthesia: patient experiences, human factors, sedation, consent and medicolegal issues.

    PubMed

    Cook, T M; Andrade, J; Bogod, D G; Hitchman, J M; Jonker, W R; Lucas, N; Mackay, J H; Nimmo, A F; O'Connor, K; O'Sullivan, E P; Paul, R G; Palmer, J H MacG; Plaat, F; Radcliffe, J J; Sury, M R J; Torevell, H E; Wang, M; Hainsworth, J; Pandit, J J

    2014-10-01

    The 5th National Audit Project of the Royal College of Anaesthetists and the Association of Anaesthetists of Great Britain and Ireland into accidental awareness during general anaesthesia yielded data related to psychological aspects from the patient, and the anaesthetist, perspectives; patients' experiences ranged from isolated auditory or tactile sensations to complete awareness. A striking finding was that 75% of experiences were for < 5 min, yet 51% of patients (95% CI 43-60%) experienced distress and 41% (95% CI 33-50%) suffered longer-term adverse effect. Distress and longer-term harm occurred across the full range of experiences but were particularly likely when the patient experienced paralysis (with or without pain). The patient's interpretation of what is happening at the time of the awareness seemed central to later impact; explanation and reassurance during suspected accidental awareness during general anaesthesia or at the time of report seemed beneficial. Quality of care before the event was judged good in 26%, poor in 39% and mixed in 31%. Three quarters of cases of accidental awareness during general anaesthesia (75%) were judged preventable. In 12% of cases of accidental awareness during general anaesthesia, care was judged good and the episode not preventable. The contributory and human factors in the genesis of the majority of cases of accidental awareness during general anaesthesia included medication, patient and education/training. The findings have implications for national guidance, institutional organisation and individual practice. The incidence of 'accidental awareness' during sedation (~1:15 000) was similar to that during general anaesthesia (~1:19 000). The project raises significant issues about information giving and consent for both sedation and anaesthesia. We propose a novel approach to describing sedation from the patient's perspective which could be used in communication and consent. Eight (6%) of the patients had resorted

  4. 29 CFR 3.4 - Submission of weekly statements and the preservation and inspection of weekly payroll records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... inspection of weekly payroll records. 3.4 Section 3.4 Labor Office of the Secretary of Labor CONTRACTORS AND... STATES § 3.4 Submission of weekly statements and the preservation and inspection of weekly payroll... subcontractor, within seven days after the regular payment date of the payroll period, to a representative of...

  5. Knowledge and regularity in planning

    NASA Technical Reports Server (NTRS)

    Allen, John A.; Langley, Pat; Matwin, Stan

    1992-01-01

    The field of planning has focused on several methods of using domain-specific knowledge. The three most common methods, use of search control, use of macro-operators, and analogy, are part of a continuum of techniques differing in the amount of reused plan information. This paper describes TALUS, a planner that exploits this continuum, and is used for comparing the relative utility of these methods. We present results showing how search control, macro-operators, and analogy are affected by domain regularity and the amount of stored knowledge.

  6. Cornelia de Lange syndrome: further delineation of phenotype, cohesin biology and educational focus, 5th Biennial Scientific and Educational Symposium abstracts.

    PubMed

    Kline, Antonie D; Calof, Anne L; Schaaf, Cheri A; Krantz, Ian D; Jyonouchi, Soma; Yokomori, Kyoko; Gauze, Maria; Carrico, Cheri S; Woodman, Julie; Gerton, Jennifer L; Vega, Hugo; Levin, Alex V; Shirahige, Katsuhiko; Champion, Michele; Goodban, Marjorie T; O'Connor, Julia T; Pipan, Mary; Horsfield, Julia; Deardorff, Matthew A; Ishman, Stacey L; Dorsett, Dale

    2014-06-01

    Cornelia de Lange syndrome (CdLS) is the prototype for the cohesinopathy disorders that have mutations in genes associated with the cohesin subunit in all cells. Roberts syndrome is the next most common cohesinopathy. In addition to the developmental implications of cohesin biology, there is much translational and basic research, with progress towards potential treatment for these conditions. Clinically, there are many issues in CdLS faced by the individual, parents and caretakers, professionals, and schools. The following abstracts are presentations from the 5th Cornelia de Lange Syndrome Scientific and Educational Symposium on June 20-21, 2012, in conjunction with the Cornelia de Lange Syndrome Foundation National Meeting, Lincolnshire, IL. The research committee of the CdLS Foundation organizes the meeting, reviews and accepts abstracts and subsequently disseminates the information to the families. In addition to the basic science and clinical discussions, there were educationally-focused talks related to practical aspects of management at home and in school. AMA CME credits were provided by Greater Baltimore Medical Center, Baltimore, MD. PMID:24504889

  7. Consensus for Radiotherapy in Hepatocellular Carcinoma from The 5th Asia-Pacific Primary Liver Cancer Expert Meeting (APPLE 2014): Current Practice and Future Clinical Trials

    PubMed Central

    Park, Hee Chul; Yu, Jeong Il; Cheng, Jason Chia-Hsien; Zeng, Zhao Chong; Hong, Ji Hong; Wang, Michael Lian Chek; Kim, Mi Sook; Chi, Kwan Hwa; Liang, Po-Ching; Lee, Rheun-Chuan; Lau, Wan-Yee; Han, Kwang Hyub; Chow, Pierce Kah-Hoe; Seong, Jinsil

    2016-01-01

    A consensus meeting to develop practice guidelines and to recommend future clinical trials for radiation therapy (RT), including external beam RT (EBRT), and selective internal RT (SIRT) in hepatocellular carcinoma (HCC) was held at the 5th annual meeting of the Asia-Pacific Primary Liver Cancer Expert consortium. Although there is no randomized phase III trial evidence, the efficacy and safety of RT in HCC has been shown by prospective and retrospective studies using modern RT techniques. Based on these results, the committee came to a consensus on the utility and efficacy of RT in the management of HCC according to each disease stage as follows: in early and intermediate stage HCC, if standard treatment is not compatible, RT, including EBRT and SIRT can be considered. In locally advanced stage HCC, combined EBRT with transarterial chemoembolization or hepatic arterial infusion chemotherapy, and SIRT can be considered. In terminal stage HCC, EBRT can be considered for palliation of symptoms and reduction of morbidity caused by the primary tumor or its metastases. Despite the currently reported benefits of RT in HCC, the committee agreed that there is a compelling need for large prospective studies, including randomized phase III trial evidence evaluating the role of RT. Specifically studies evaluating the efficacy and safety of sequential combination of EBRT and SIRT are strongly recommended. PMID:27493892

  8. The Hetu'u Global Network: Using the rare June 5th/6th Transit of Venus to Bring Astronomy to the Remote Easter Island

    NASA Astrophysics Data System (ADS)

    Faherty, Jacqueline; Rodriguez, D.

    2013-01-01

    There are rare times in astronomy when a celestial event, visible in broad daylight, can be used to measure a fundamental parameter and inspire a globe full of school age students. The June 5th/6th transit of Venus was one such event. In celebration, nine astronomy postdocs from the Chilean mainland traveled to Easter Island to lead a series of astronomy outreach activities over three days, culminating in a transit-viewing event. Our team dubbed "Equipo Hetu'u" or "Team Star" in the Rapa Nui (Easter Island native) language spent two days giving astronomy talks and doing hands-on demonstrations at the Museo Antropologico P. Sebastian Englert. In the final day-and-a-half leading up to the transit, we visited the science classes in the majority of the schools on the island, in order to spread the message about the once-in-a-lifetime transit event, highlighting how we planned on using it to measure the distance to the Sun. We estimate over 25% 1500 people) of this remote island participated in one or more of our organized activities. Our experience with this project is an excellent lesson on how to organize, lead, and fully execute a major outreach endeavor that inspires hundreds with minimal resources (save the spectacular event provided by the cosmos).

  9. Vitamin D status and associated occupational factors in Korean wage workers: data from the 5th Korea national health and nutrition examination survey (KNHANES 2010–2012)

    PubMed Central

    2014-01-01

    Objectives Vitamin D deficiency is increasing worldwide. However, few studies have attempted to examine the vitamin D status of wage workers and the correlation between vitamin D deficiency and working conditions. Hence, we aimed to evaluate the prevalence of vitamin D deficiency and the association between occupational conditions and vitamin D deficiency among Korean wage workers. Methods Wage workers aged 20–65 years from the 5th Korea National Health and Nutrition Examination Survey (KNHANES 2010–2012; n = 5409) were included in our analysis. We measured the prevalence of vitamin D deficiency and identified the correlations with the working conditions of these subjects. Results The prevalence of vitamin D deficiency in male and female subjects was 69.5% and 83.1%, respectively. Among the male subjects, a significant correlation between vitamin D deficiency and working conditions was observed among shift workers, office workers, and permanent workers. No significant correlation with any type of working conditions was observed among female subjects. Conclusion The prevalence of vitamin D deficiency among Korean wage workers was very high and was found to correlate significantly with working conditions, likely because of insufficient exposure to sunlight associated with certain types of work. Wage workers require more frequent outdoor activity and nutrition management to maintain sufficient vitamin D level. PMID:25852939

  10. [The current situation and issues of medical English education and suggestions toward improvement--reports from the 5th meeting of the Japan Society for Medical English Education].

    PubMed

    Ohashi, Hiroshi

    2002-12-01

    This is a report from the 5th academic meeting of the Japan Society for Medical English Education held at Kawasaki University of Medical Welfare on August 3rd and 4th of 2002. It also includes a course description of our English courses, their problems and some suggestions for improvement. First, I report several papers presented at the meeting that are useful and suggestive for the English education at our university in order to bring them to everyone's attention and to improve our English program. The topics of the papers include; what "Medical English" is; reports of English courses taught by medical doctors; reports of English courses for developing specific proficiencies such as listening, writing summaries and delivering oral presentations. Next, I give a course description of our present English program and point out some problems that should be dealt with. In this connection, I make several suggestions for future improvement. Lastly, I refer to the "strategies to educate the Japanese who can use English", which were proposed recently by the Ministry of Education, Culture, Sports, Science and Technology and suggest our improvement be in line with these strategies. PMID:12506860

  11. Consensus for Radiotherapy in Hepatocellular Carcinoma from The 5th Asia-Pacific Primary Liver Cancer Expert Meeting (APPLE 2014): Current Practice and Future Clinical Trials.

    PubMed

    Park, Hee Chul; Yu, Jeong Il; Cheng, Jason Chia-Hsien; Zeng, Zhao Chong; Hong, Ji Hong; Wang, Michael Lian Chek; Kim, Mi Sook; Chi, Kwan Hwa; Liang, Po-Ching; Lee, Rheun-Chuan; Lau, Wan-Yee; Han, Kwang Hyub; Chow, Pierce Kah-Hoe; Seong, Jinsil

    2016-07-01

    A consensus meeting to develop practice guidelines and to recommend future clinical trials for radiation therapy (RT), including external beam RT (EBRT), and selective internal RT (SIRT) in hepatocellular carcinoma (HCC) was held at the 5th annual meeting of the Asia-Pacific Primary Liver Cancer Expert consortium. Although there is no randomized phase III trial evidence, the efficacy and safety of RT in HCC has been shown by prospective and retrospective studies using modern RT techniques. Based on these results, the committee came to a consensus on the utility and efficacy of RT in the management of HCC according to each disease stage as follows: in early and intermediate stage HCC, if standard treatment is not compatible, RT, including EBRT and SIRT can be considered. In locally advanced stage HCC, combined EBRT with transarterial chemoembolization or hepatic arterial infusion chemotherapy, and SIRT can be considered. In terminal stage HCC, EBRT can be considered for palliation of symptoms and reduction of morbidity caused by the primary tumor or its metastases. Despite the currently reported benefits of RT in HCC, the committee agreed that there is a compelling need for large prospective studies, including randomized phase III trial evidence evaluating the role of RT. Specifically studies evaluating the efficacy and safety of sequential combination of EBRT and SIRT are strongly recommended. PMID:27493892

  12. Safety Audit/Inspection Manual.

    ERIC Educational Resources Information Center

    American Chemical Society, Washington, DC.

    This guide provides guidelines and procedures for safety audits and inspections in work environments. Contents include: (1) Administrative Concepts, (2) Physical Concepts, (3) Protecting Your Audits, (4) Safety Inspections, and (5) Safety Inspection Checklist. The appendix features federal laws and regulations affecting laboratories. (YDS)

  13. Optical inspection of NGL masks

    NASA Astrophysics Data System (ADS)

    Pettibone, Donald W.; Stokowski, Stanley E.

    2004-12-01

    For the last five years KLA-Tencor and our joint venture partners have pursued a research program studying the ability of optical inspection tools to meet the inspection needs of possible NGL lithographies. The NGL technologies that we have studied include SCALPEL, PREVAIL, EUV lithography, and Step and Flash Imprint Lithography. We will discuss the sensitivity of the inspection tools and mask design factors that affect tool sensitivity. Most of the work has been directed towards EUV mask inspection and how to optimize the mask to facilitate inspection. Our partners have succeeded in making high contrast EUV masks ranging in contrast from 70% to 98%. Die to die and die to database inspection of EUV masks have been achieved with a sensitivity that is comparable to what can be achieved with conventional photomasks, approximately 80nm defect sensitivity. We have inspected SCALPEL masks successfully. We have found a limitation of optical inspection when applied to PREVAIL stencil masks. We have run inspections on SFIL masks in die to die, reflected light, in an effort to provide feedback to improve the masks. We have used a UV inspection system to inspect both unpatterned EUV substrates (no coatings) and blanks (with EUV multilayer coatings). These inspection results have proven useful in driving down the substrate and blank defect levels.

  14. Flexible ultrasonic pipe inspection apparatus

    DOEpatents

    Jenkins, C.F.; Howard, B.D.

    1994-01-01

    Pipe crawlers, pipe inspection {open_quotes}rabbits{close_quotes} and similar vehicles are widely used for inspecting the interior surfaces of piping systems, storage tanks and process vessels for damaged or flawed structural features. This paper describes the design of a flexible, modular ultrasonic pipe inspection apparatus.

  15. RES: Regularized Stochastic BFGS Algorithm

    NASA Astrophysics Data System (ADS)

    Mokhtari, Aryan; Ribeiro, Alejandro

    2014-12-01

    RES, a regularized stochastic version of the Broyden-Fletcher-Goldfarb-Shanno (BFGS) quasi-Newton method is proposed to solve convex optimization problems with stochastic objectives. The use of stochastic gradient descent algorithms is widespread, but the number of iterations required to approximate optimal arguments can be prohibitive in high dimensional problems. Application of second order methods, on the other hand, is impracticable because computation of objective function Hessian inverses incurs excessive computational cost. BFGS modifies gradient descent by introducing a Hessian approximation matrix computed from finite gradient differences. RES utilizes stochastic gradients in lieu of deterministic gradients for both, the determination of descent directions and the approximation of the objective function's curvature. Since stochastic gradients can be computed at manageable computational cost RES is realizable and retains the convergence rate advantages of its deterministic counterparts. Convergence results show that lower and upper bounds on the Hessian egeinvalues of the sample functions are sufficient to guarantee convergence to optimal arguments. Numerical experiments showcase reductions in convergence time relative to stochastic gradient descent algorithms and non-regularized stochastic versions of BFGS. An application of RES to the implementation of support vector machines is developed.

  16. Overview of the software inspection process

    SciTech Connect

    Lane, G.L.; Dabbs, R.

    1997-11-01

    This tutorial introduces attendees to the Inspection Process and teaches them how to organize and participate in a software inspection. The tutorial advocates the benefits of inspections and encourages attendees to socialize the inspection process in their organizations.

  17. Identification and sorting of regular textures according to their similarity

    NASA Astrophysics Data System (ADS)

    Hernández Mesa, Pilar; Anastasiadis, Johannes; Puente León, Fernando

    2015-05-01

    Regardless whether mosaics, material surfaces or skin surfaces are inspected their texture plays an important role. Texture is a property which is hard to describe using words but it can easily be described in pictures. Furthermore, a huge amount of digital images containing a visual description of textures already exists. However, this information becomes useless if there are no appropriate methods to browse the data. In addition, depending on the given task some properties like scale, rotation or intensity invariance are desired. In this paper we propose to analyze texture images according to their characteristic pattern. First a classification approach is proposed to separate regular from non-regular textures. The second stage will focus on regular textures suggesting a method to sort them according to their similarity. Different features will be extracted from the texture in order to describe its scale, orientation, texel and the texel's relative position. Depending on the desired invariance of the visual characteristics (like the texture's scale or the texel's form invariance) the comparison of the features between images will be weighted and combined to define the degree of similarity between them. Tuning the weighting parameters allows this search algorithm to be easily adapted to the requirements of the desired task. Not only the total invariance of desired parameters can be adjusted, the weighting of the parameters may also be modified to adapt to an application-specific type of similarity. This search method has been evaluated using different textures and similarity criteria achieving very promising results.

  18. Industrial Inspection System

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Lixi, Inc. has built a thriving business on NASA-developed x-ray technology. The Low Intensity X-ray Imaging scope (LIXI) was designed to use less than one percent of radiation required by conventional x-ray devices. It is portable and can be used for a variety of industrial inspection systems as well as medical devices. A food processing plant uses the new LIXI Conveyor system to identify small bone fragments in chicken. The chicken packages on a conveyor belt enter an x-ray chamber and the image is displayed on a monitor. Defects measuring less than a millimeter can be detected. An important advantage of the system is its ability to inspect 100 percent of the product right on the production line.

  19. Tessellating the Sphere with Regular Polygons

    ERIC Educational Resources Information Center

    Soto-Johnson, Hortensia; Bechthold, Dawn

    2004-01-01

    Tessellations in the Euclidean plane and regular polygons that tessellate the sphere are reviewed. The regular polygons that can possibly tesellate the sphere are spherical triangles, squares and pentagons.

  20. Inspection challenges -- pigs versus pipes

    SciTech Connect

    Holden, E.M.; Grimes, K.

    1996-12-31

    As the size of the international pipeline network grows, and systems age (by the year 2000, over 50% of US gas transmission pipelines will be over 40 years old), and as environmental pressures increase, the demand for inspection is ever more apparent. Pipeline operations` experience has revealed many new defects and new inspection problems, many of which have challenged in-line inspection technology and stimulated further developments. This paper describes what pipeline inspection needs to find, the available technology and some examples of the inspection challenges.

  1. Infrared microscope inspection apparatus

    DOEpatents

    Forman, Steven E.; Caunt, James W.

    1985-02-26

    Apparatus and system for inspecting infrared transparents, such as an array of photovoltaic modules containing silicon solar cells, includes an infrared microscope, at least three sources of infrared light placed around and having their axes intersect the center of the object field and means for sending the reflected light through the microscope. The apparatus is adapted to be mounted on an X-Y translator positioned adjacent the object surface.

  2. Infrared microscope inspection apparatus

    DOEpatents

    Forman, S.E.; Caunt, J.W.

    1985-02-26

    Apparatus and system for inspecting infrared transparents, such as an array of photovoltaic modules containing silicon solar cells, includes an infrared microscope, at least three sources of infrared light placed around and having their axes intersect the center of the object field and means for sending the reflected light through the microscope. The apparatus is adapted to be mounted on an X-Y translator positioned adjacent the object surface. 4 figs.

  3. Inspection tester for explosives

    DOEpatents

    Haas, Jeffrey S.; Simpson, Randall L.; Satcher, Joe H.

    2007-11-13

    An inspection tester that can be used anywhere as a primary screening tool by non-technical personnel to determine whether a surface contains explosives. It includes a body with a sample pad. First and second explosives detecting reagent holders and dispensers are operatively connected to the body and the sample pad. The first and second explosives detecting reagent holders and dispensers are positioned to deliver the explosives detecting reagents to the sample pad. A is heater operatively connected to the sample pad.

  4. Inspection tester for explosives

    DOEpatents

    Haas, Jeffrey S.; Simpson, Randall L.; Satcher, Joe H.

    2010-10-05

    An inspection tester that can be used anywhere as a primary screening tool by non-technical personnel to determine whether a surface contains explosives. It includes a body with a sample pad. First and second explosives detecting reagent holders and dispensers are operatively connected to the body and the sample pad. The first and second explosives detecting reagent holders and dispensers are positioned to deliver the explosives detecting reagents to the sample pad. A is heater operatively connected to the sample pad.

  5. Code inspection instructional validation

    NASA Technical Reports Server (NTRS)

    Orr, Kay; Stancil, Shirley

    1992-01-01

    The Shuttle Data Systems Branch (SDSB) of the Flight Data Systems Division (FDSD) at Johnson Space Center contracted with Southwest Research Institute (SwRI) to validate the effectiveness of an interactive video course on the code inspection process. The purpose of this project was to determine if this course could be effective for teaching NASA analysts the process of code inspection. In addition, NASA was interested in the effectiveness of this unique type of instruction (Digital Video Interactive), for providing training on software processes. This study found the Carnegie Mellon course, 'A Cure for the Common Code', effective for teaching the process of code inspection. In addition, analysts prefer learning with this method of instruction, or this method in combination with other methods. As is, the course is definitely better than no course at all; however, findings indicate changes are needed. Following are conclusions of this study. (1) The course is instructionally effective. (2) The simulation has a positive effect on student's confidence in his ability to apply new knowledge. (3) Analysts like the course and prefer this method of training, or this method in combination with current methods of training in code inspection, over the way training is currently being conducted. (4) Analysts responded favorably to information presented through scenarios incorporating full motion video. (5) Some course content needs to be changed. (6) Some content needs to be added to the course. SwRI believes this study indicates interactive video instruction combined with simulation is effective for teaching software processes. Based on the conclusions of this study, SwRI has outlined seven options for NASA to consider. SwRI recommends the option which involves creation of new source code and data files, but uses much of the existing content and design from the current course. Although this option involves a significant software development effort, SwRI believes this option

  6. Waste Inspection Tomography (WIT)

    SciTech Connect

    Bernardi, R.T.

    1995-12-01

    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU. The mobile feature of WIT allows inspection technologies to be brought to the nuclear waste drum storage site without the need to relocate drums for safe, rapid, and cost-effective characterization of regulated nuclear waste. The combination of these WIT characterization modalities provides the inspector with an unprecedented ability to non-invasively characterize the regulated contents of waste drums as large as 110 gallons, weighing up to 1,600 pounds. Any objects that fit within these size and weight restrictions can also be inspected on WIT, such as smaller waste bags and drums that are five and thirty-five gallons.

  7. Laser Scanning In Inspection

    NASA Astrophysics Data System (ADS)

    West, Patricia; Baker, Lionel R.

    1989-03-01

    This paper is a review of the applications of laser scanning in inspection. The reasons for the choice of a laser in flying spot scanning and the optical properties of a laser beam which are of value in a scanning instrument will be given. The many methods of scanning laser beams in both one and two dimensions will be described. The use of one dimensional laser scanners for automatic surface inspection for transmitting and reflective products will be covered in detail, with particular emphasis on light collection techniques. On-line inspection applications which will be mentioned include: photographic film web, metal strip products, paper web, glass sheet, car body paint surfaces and internal cylinder bores. Two dimensional laser scanning is employed in applications where increased resolution, increased depth of focus, and better contrast are required compared with conventional vidicon TV or solid state array cameras. Such examples as special microscope laser scanning systems and a TV compatible system for use in restricted areas of a nuclear reactor will be described. The technical and economic benefits and limitations of laser scanning video systems will be compared with conventional TV and CCD array devices.

  8. Some Cosine Relations and the Regular Heptagon

    ERIC Educational Resources Information Center

    Osler, Thomas J.; Heng, Phongthong

    2007-01-01

    The ancient Greek mathematicians sought to construct, by use of straight edge and compass only, all regular polygons. They had no difficulty with regular polygons having 3, 4, 5 and 6 sides, but the 7-sided heptagon eluded all their attempts. In this article, the authors discuss some cosine relations and the regular heptagon. (Contains 1 figure.)

  9. Regular Pentagons and the Fibonacci Sequence.

    ERIC Educational Resources Information Center

    French, Doug

    1989-01-01

    Illustrates how to draw a regular pentagon. Shows the sequence of a succession of regular pentagons formed by extending the sides. Calculates the general formula of the Lucas and Fibonacci sequences. Presents a regular icosahedron as an example of the golden ratio. (YP)

  10. 22 CFR 120.39 - Regular employee.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Regular employee. 120.39 Section 120.39 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.39 Regular employee. (a) A regular employee means for purposes of this subchapter: (1) An...

  11. 22 CFR 120.39 - Regular employee.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Regular employee. 120.39 Section 120.39 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.39 Regular employee. (a) A regular employee means for purposes of this subchapter: (1) An...

  12. 22 CFR 120.39 - Regular employee.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Regular employee. 120.39 Section 120.39 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.39 Regular employee. (a) A regular employee means for purposes of this subchapter: (1) An...

  13. EDITORIAL: Artificial Muscles: Selected papers from the 5th World Congress on Biomimetics, Artificial Muscles and Nano-Bio (Osaka, Japan, 25-27 November 2009) Artificial Muscles: Selected papers from the 5th World Congress on Biomimetics, Artificial Muscles and Nano-Bio (Osaka, Japan, 25-27 November 2009)

    NASA Astrophysics Data System (ADS)

    Shahinpoor, Mohsen

    2011-12-01

    The 5th World Congress on Biomimetics, Artificial Muscles and Nano-Bio and the 4th International Conference on Artificial Muscles were held in Osaka, Japan, 23-27 November 2009. This special section of Smart Materials and Structures is devoted to a selected number of research papers presented at this international conference and congress. Of the 76 or so papers presented at the conference, only 10 papers were finally selected, reviewed and accepted for this special section, following the regular reviewing procedures of the journal. This special section is focused on polymeric artificial muscles, electroactive polymers, multifunctional nanocomposites and their applications. In particular, an electromechanical model for self-sensing ionic polymer-metal composite actuating devices with patterned surface electrodes is presented which discusses the concept of creating self-sensing ionic polymer-metal composite (IPMC) actuating devices with patterned surface electrodes where actuator and sensor elements are separated by a grounded shielding electrode. Eventually, an electromechanical model of the device is also proposed and validated. Following that, there is broad coverage of polytetrahydrofurane-polyethylene oxide-PEDOT conducting interpenetrating polymer networks (IPNs) for high speed actuators. The conducting polymer (poly(3,4-ethylenedioxythiophene)) is incorporated within the IPNs, which are synthesized from polyethylene oxide (PEO)/polytetrahydrofurane (PTHF) networks. PEO/PTHF IPNs are prepared using poly(ethylene glycol) methacrylate and dimethacrylate and hydroxythelechelic PTHF as starting materials. The conducting IPN actuators are prepared by oxidative polymerization of 3,4-ethylenedioxithiophene (EDOT) using FeCl3 as an oxidizing agent within the PEO/PTHF IPN host matrix. Subsequently, giant and reversible magnetorheology of carrageenan/iron oxide magnetic gels are discussed and the effect of magnetic fields on the viscoelastic properties

  14. Natural frequency of regular basins

    NASA Astrophysics Data System (ADS)

    Tjandra, Sugih S.; Pudjaprasetya, S. R.

    2014-03-01

    Similar to the vibration of a guitar string or an elastic membrane, water waves in an enclosed basin undergo standing oscillatory waves, also known as seiches. The resonant (eigen) periods of seiches are determined by water depth and geometry of the basin. For regular basins, explicit formulas are available. Resonance occurs when the dominant frequency of external force matches the eigen frequency of the basin. In this paper, we implement the conservative finite volume scheme to 2D shallow water equation to simulate resonance in closed basins. Further, we would like to use this scheme and utilizing energy spectra of the recorded signal to extract resonant periods of arbitrary basins. But here we first test the procedure for getting resonant periods of a square closed basin. The numerical resonant periods that we obtain are comparable with those from analytical formulas.

  15. Pairing effect and misleading regularity

    NASA Astrophysics Data System (ADS)

    Al-Sayed, A.

    2015-11-01

    We study the nearest neighbor spacing distribution of energy levels of even-even nuclei classified according to their reduced electric quadrupole transition probability B (E2) ↑ using the available experimental data. We compare between Brody, and Abul-Magd distributions that extract the degree of chaoticity within nuclear dynamics. The results show that Abul-Magd parameter f can represents the chaotic behavior in more acceptable way than Brody, especially if a statistically significant study is desired. A smooth transition from chaos to order is observed as B (E2) ↑ increases. An apparent regularity was located at the second interval, namely: at 0.05 ≤ B (E2) < 0.1 in e2b2 units, and at 10 ≤ B (E2) < 15 in Weisskopf unit. Finally, the chaotic behavior parameterized in terms of B (E2) ↑ does not depend on the unit used.

  16. 5th National Audit Project (NAP5) on accidental awareness during general anaesthesia: patient experiences, human factors, sedation, consent, and medicolegal issues.

    PubMed

    Cook, T M; Andrade, J; Bogod, D G; Hitchman, J M; Jonker, W R; Lucas, N; Mackay, J H; Nimmo, A F; O'Connor, K; O'Sullivan, E P; Paul, R G; Palmer, J H M G; Plaat, F; Radcliffe, J J; Sury, M R J; Torevell, H E; Wang, M; Hainsworth, J; Pandit, J J

    2014-10-01

    The 5th National Audit Project (NAP5) of the Royal College of Anaesthetists and the Association of Anaesthetists of Great Britain and Ireland into accidental awareness during general anaesthesia (AAGA) yielded data related to psychological aspects from the patient, and the anaesthetist, perspectives; patients' experiences ranged from isolated auditory or tactile sensations to complete awareness. A striking finding was that 75% of experiences were for <5 min, yet 51% of patients [95% confidence interval (CI) 43-60%] experienced distress and 41% (95% CI 33-50%) suffered longer term adverse effect. Distress and longer term harm occurred across the full range of experiences but were particularly likely when the patient experienced paralysis (with or without pain). The patient's interpretation of what is happening at the time of the awareness seemed central to later impact; explanation and reassurance during suspected AAGA or at the time of report seemed beneficial. Quality of care before the event was judged good in 26%, poor in 39%, and mixed in 31%. Three-quarters of cases of AAGA (75%) were judged preventable. In 12%, AAGA care was judged good and the episode not preventable. The contributory and human factors in the genesis of the majority of cases of AAGA included medication, patient, and education/training. The findings have implications for national guidance, institutional organization, and individual practice. The incidence of 'accidental awareness' during sedation (~1:15,000) was similar to that during general anaesthesia (~1:19,000). The project raises significant issues about information giving and consent for both sedation and anaesthesia. We propose a novel approach to describing sedation from the patient's perspective which could be used in communication and consent. Eight (6%) of the patients had resorted to legal action (12, 11%, to formal complaint) at the time of reporting. NAP5 methodology provides a standardized template that might usefully inform

  17. 5th International AIDS Society Conference on HIV Pathogenesis, Treatment and Prevention: summary of key research and implications for policy and practice - operations research.

    PubMed

    Kort, Rodney

    2010-01-01

    Operations research was added as a fourth scientific track to the pathogenesis conference series at the 5th IAS Conference on HIV Pathogenesis, Treatment and Prevention (IAS 2009) in recognition of the importance of this growing research field and the need for applied research to inform and evaluate the scale up of some key interventions in HIV treatment, care and prevention.Several studies demonstrated how task shifting and the decentralization of health services can leverage scarce health care resources to support scale-up efforts. For example, a Ugandan study comparing home-based and facility-based antiretroviral therapy (ART) delivery found that both delivered equivalent clinical outcomes, but home-based delivery resulted in substantial cost savings to patients; and a retrospective cohort analysis of an HIV care programme in Lesotho demonstrated that devolving routine patient management to nurses and trained counsellors resulted in impressive gains in annual enrolment, retention in care and other clinical indicators.Studies also demonstrated how the use of trained counsellors and public health advisors could effectively expand both clinical and public health capacity in low-income settings. Studies evaluating the impact of integrating HIV and TB care resulted in improved treatment outcomes in coinfected populations, the development of environmental interventions to reduce TB transmission, and uncovering of the extent of multi-drug-resistant and extremely drug-resistant tuberculosis (MDR-TB and XDR-TB) in KwaZulu-Natal, South Africa.Some mathematical modelling and cost-effectiveness studies presented at this meeting addressed interventions to increase retention in care, and strengthened the evidentiary basis for universal voluntary testing and immediate ART on reducing HIV transmission; debate continued about the relative merits of clinical versus laboratory monitoring. Finally, a provocative plenary presentation outlined the shortfalls of current prevention

  18. Relationship between Long Working Hours and Suicidal Thoughts: Nationwide Data from the 4th and 5th Korean National Health and Nutrition Examination Survey

    PubMed Central

    Yoon, Jin-Ha; Jung, Pil Kyun; Roh, Jaehoon; Seok, Hongdeok; Won, Jong-Uk

    2015-01-01

    Background Long working hours are a worldwide problem and may increase the risk of various health issues. However, the health effects of long working hours on suicidal thoughts have not been frequently studied. Our goal was to investigate the relationship between long working hours and suicidal thoughts in the rapidly developing country of Korea. Methods Data from 12,076 participants (7,164 men, 4,912 women) from the 4th and 5th Korean National Health and Nutrition Examination Surveys were used for the current analysis. Multivariate logistic regression models were used to estimate odds ratios and 95% confidence intervals for suicidal thoughts. Combined effects of long working hours and lower socioeconomic status or sleep disturbance were also estimated. Results Compared to groups who worked less than 52 hours per week, odds ratios (95% confidence intervals) for suicidal thoughts in groups who worked 60 hours or more per week were 1.36 (1.09–1.70) for males and 1.38 (1.11–1.72) for females, even after controlling for household income, marital status, history of hypertension or diabetes mellitus, health-related behaviors, and past two weeks’ experience of injury, intoxication, or acute or chronic diseases, as well as type of work. The combined effects of long working hours with lower socioeconomic status, or with sleep disturbance, were also significantly higher compared to participants who worked less than 52 hours per week with higher socioeconomic status, or with 6–8 hours of nighttime sleep. Conclusion In this study, long working hours were linked to suicidal thoughts for both genders. Additionally, the odds of those suicidal thoughts were higher for lower socioeconomic groups. To prevent adverse psychological health problems such as suicidal thoughts, a strategy regarding long working hours should be investigated. PMID:26080022

  19. Pellet inspection apparatus

    DOEpatents

    Wilks, Robert S.; Taleff, Alexander; Sturges, Jr., Robert H.

    1982-01-01

    Apparatus for inspecting nuclear fuel pellets in a sealed container for diameter, flaws, length and weight. The apparatus includes, in an array, a pellet pick-up station, four pellet inspection stations and a pellet sorting station. The pellets are delivered one at a time to the pick-up station by a vibrating bowl through a vibrating linear conveyor. Grippers each associated with a successive pair of the stations are reciprocable together to pick up a pellet at the upstream station of each pair and to deposit the pellet at the corresponding downstream station. The gripper jaws are opened selectively depending on the state of the pellets at the stations and the particular cycle in which the apparatus is operating. Inspection for diameter, flaws and length is effected in each case by a laser beam projected on the pellets by a precise optical system while each pellet is rotated by rollers. Each laser and its optical system are mounted in a container which is free standing on a precise surface and is provided with locating buttons which engage locating holes in the surface so that each laser and its optical system is precisely set. The roller stands are likewise free standing and are similarly precisely positioned. The diameter optical system projects a thin beam of light which scans across the top of each pellet and is projected on a diode array. The fl GOVERNMENT CONTRACT CLAUSE The invention herein described was made in the course of or under a contract or subcontract thereunder with the Department of Energy bearing No. EY-67-14-C-2170.

  20. Laser Safety Inspection Criteria

    SciTech Connect

    Barat, K

    2005-06-13

    A responsibility of the Laser Safety Officer (LSO) is to perform laser audits. The American National Standard Z136.1 Safe Use of Lasers references this requirement through several sections. One such reference is Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''. The composition, frequency and rigor of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms It is common for audit findings from one inspector or inspection to the next to vary even when reviewing the same material. How often has one heard a comment, ''well this area has been inspected several times over the years and no one ever said this or that was a problem before''. A great number of audit items, and therefore findings, are subjective because they are based on the experience and interest of the auditor to particular items on the checklist. Beam block usage, to one set of eyes might be completely adequate, while to another, inadequate. In order to provide consistency, the Laser Safety Office of the National Ignition Facility Directorate has established criteria for a number of items found on the typical laser safety audit form. The criteria are distributed to laser users. It serves two broad purposes; first, it gives the user an expectation of what will be reviewed by an auditor. Second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items, such as labelling of beam blocks.

  1. How Do 4th, 5th, and 6th Grade Students' Categories of Cognitive Reflections in Interviews on Derivational Morphology Compare to Their Upper Level Spelling Inventory Orthographic Knowledge?

    ERIC Educational Resources Information Center

    Smith, Darcie D.

    2012-01-01

    Eighty-seven 4th, 5th and 6th grade students were administered the "Derivational Relatedness Interview" (DRI) (Templeton, Smith, Moloney, Van Pelt, & Ives, 2009). The purpose of this instrument is to explore students' understanding of derivational morphology. During the same week, the subjects were also administered an Upper…

  2. Mountain Dew[R] or Mountain Don't?: A Pilot Investigation of Caffeine Use Parameters and Relations to Depression and Anxiety Symptoms in 5th- and 10th-Grade Students

    ERIC Educational Resources Information Center

    Luebbe, Aaron M.; Bell, Debora J.

    2009-01-01

    Background: Caffeine, the only licit psychoactive drug available to minors, may have a harmful impact on students' health and adjustment, yet little is known about its use or effects on students, especially from a developmental perspective. Caffeine use in 5th- and 10th-grade students was examined in a cross-sectional design, and relations and…

  3. A Study on Reading Comprehension Skills of Primary School 5th Grade Students--Learning Basic Reading and Writing Skills through Phonics-Based Sentence Method or Decoding Method

    ERIC Educational Resources Information Center

    Kusdemir Kayiran, Bilge; Karabay, Aysegul

    2012-01-01

    This research aims at investigating the influence of two methods implemented in primary reading and writing teaching programs--phonics-based sentence method and decoding (analysis) method--on primary school 5th grade students' reading comprehension achievement. Also, the study considers the relationship between socio-economic status and reading…

  4. A Response to Lawrence Ferrara's Chapter Four in R. Phelps, R. Sadoff, E. Warburton, and L. Ferrara, "A Guide to Research in Music Education," 5th Edition (Lanham, Maryland, Scarecrow Press, Inc., 2005)

    ERIC Educational Resources Information Center

    Heller, Jack

    2006-01-01

    A reply to Lawrence Ferrara's Chapter 4 in R. Phelps, R. Sadoff, E. Warburton, and L. Ferrara, "A Guide to Research in Music Education," 5th Edition is presented. It it curious that Ferrara disagrees with Jack Heller and Edward J. P. O'Connor's view that "philosophy" is not "research," yet in the chapter headings in the book A Guide to Research in…

  5. Bridge inspection in Kansas

    NASA Astrophysics Data System (ADS)

    Whisler, Don E.

    1995-05-01

    The purpose of this paper is to give the reader a brief insight into the Kansas Department of Transportation (KDOT) Bridge Inspection Program. The State of Kansas has 25,580 bridge length structures within its boundaries used to carry vehicle traffic or pedestrians, excluding railroad. This total ranks third within the nation according to the November issue of 'Better Roads.' The total number of structures listed includes 20,453 structures owned by local governments, 340 structures owned by the Kansas Turnpike Authority, and 4,787 structures owned by the KDOT. This paper will deal specifically with the KDOT structures only.

  6. Acoustic inspection device

    DOEpatents

    Diaz, Aaron A.; Burghard, Brion J.; Skorpik, James R.; Pappas, Richard A.; Mullen, O. Dennis; Samuel, Todd J.; Reid, Larry D.; Harris, Joe C.; Valencia, Juan D.; Smalley, Jonathan T.; Shepard, Chester L.; Taylor, Theodore T.

    2005-09-06

    An ultrasound inspection apparatus particularly adapted to examine containers (sealed or unsealed) containing a liquid or solid bulk material. The apparatus has an overall configuration of a hand held pistol with a front transducer contact surface that is positioned against a front wall of the container. An ultrasound pulse is transmitted from the apparatus to be reflected from a back wall of a container being investigated. The received echo pulse is converted to a digital waveform. The waveform is analyzed relative to temperature, travel distance of the pulse(s), and time of travel to ascertain characteristics of the liquid or other materials and to provide identification of the same.

  7. Fluorescent penetrant inspection

    NASA Technical Reports Server (NTRS)

    Sastri, Sankar

    1990-01-01

    The purpose of this experiment is to familiarize the student with fluorescent penetrant inspection and to relate it to classification of various defects. The penetrant method of nondestructive testing is a method for finding discontinuities open to the surface in solids and essentially nonporous bodies. The method employs a penetrating liquid which is applied over the surface and enters the discontinuity or crack. After the excess of penetrant has been cleaned from the surface, the penetrant which exudes or is drawn back out of the crack indicates the presence and location of a discontinuity. The experimental procedure is described.

  8. Ceramic inspection system

    DOEpatents

    Werve, Michael E.

    2006-05-16

    A system for inspecting a ceramic component. The ceramic component is positioned on a first rotary table. The first rotary table rotates the ceramic component. Light is directed toward the first rotary table and the rotating ceramic component. A detector is located on a second rotary table. The second rotary table is operably connected to the first rotary table and the rotating ceramic component. The second rotary table is used to move the detector at an angle to the first rotary table and the rotating ceramic component.

  9. Ultrasonic inspection of reactor systems

    SciTech Connect

    Majzlik, E.J. Jr.

    1989-01-01

    The subject of this presentation is ultrasonic inspection of reactor systems. This paper describes two current programs underway at Savannah River Site which provide state-of-the-art ultrasonic inspections of weld heat-affected zones in the primary cooling loop of the Savannah River Site reactors. It also describes the automated remote inspection equipment being developed and employed; briefly describe the procedures being used; and give you a general idea of the future direction of two major programs: Moderator Piping Inspection Program and the Reactor Tank Wall Weld Inspection Program. The objective of these programs is to provide inspection techniques to more fully determine the condition of the reactor primary system and provide data for prediction of maintenance needs and remaining service life. Detection and sizing of intergranular stress corrosion cracking is the focus of these programs.

  10. Effect of Chronic Rhinosinusitis With or Without Nasal Polyp on Quality of Life in South Korea: 5th Korea National Health and Nutrition Examination Survey Korean

    PubMed Central

    Kim, Do Hyun; Han, Kyungdo; Kim, Soo Whan

    2016-01-01

    Objectives This is the first study of its kind to investigate the relationship between chronic rhinosinusitis (CRS) with or without nasal polyps (NP) and health-related quality of life (HRQoL) in the general adult Korean population. We sought to evaluate the association after adjustment for confounding factors. We also evaluated HRQoL according to presence of NP in CRS patients. Methods In this cross-sectional study we used nationally representative samples from the 5th Korea National Health and Nutrition Examination Survey (2010–2012). A total of 17,490 participants were included in the study, of which 613 were diagnosed with CRS. Univariate analysis was conducted on healthy versus CRS groups, segregated by gender with weighted prevalence of demographic characteristics, socioeconomic status, and comorbid diseases. Subanalysis was carried out to evaluate the relationship between CRS with or without NP and HRQoL using EuroQol 5-dimension (EQ-5D) and visual analog scale (EQ-VAS). The odds ratios for EQ-5D were estimated by multiple logistic regression analyses with confounder adjustment. Results Weighted prevalence of CRS of adult male was found to be 3.7% and CRS with nasal polyps (CRSwNP) 0.5%, while female CRS was 3.3% and CRSwNP 0.3%. There was no significant difference between the groups (P#x0003d;0.332). The scores for female, EQ-5D index (P for trend<0.001) and EQ-VAS (P for trend=0.002) showed decreasing trend from healthy participants to CRS without nasal polyps (CRSsNP) and from CRSsNp to CRSwNP. After adjusting for demographic characteristics, socioeconomic status, and comorbid diseases, EQ-5D scores; EQ-5D index (P<0.001) and EQ-VAS (P<0.001) exhibited poorer HRQoL compared to healthy participants, exclusively within the female group. Conclusion These data suggest that female patients with CRS are at higher risk of poor HRQoL. In addition, HRQoL of female CRSwNP was lower compared to those of CRSsNP and healthy participants. PMID:27090274

  11. EDITORIAL: PLASMA 2006: The 5th International Conference on the Intrinsic Josephson Effect and Plasma Oscillations in High-TC Superconductors

    NASA Astrophysics Data System (ADS)

    Warburton, Paul; Yurgens, August

    2007-02-01

    The 5th International Conference on the Intrinsic Josephson Effect and Plasma Oscillations in High-TC Superconductors (known as `PLASMA' for short) took place in London from July 17th to 19th 2006. The meeting was organised jointly by the Superconductivity Group of the Institute of Physics and the European Science Foundation network `Arrays of Quantum Dots and Josephson Junctions' (AQDJJ). It was sponsored by the UK Engineering and Physical Sciences Research Council, AQDJJ, the Japan Society for the Promotion of Physics and the National Institute of Materials Science (NIMS). The meeting was chaired by Paul Warburton of University College London who wishes to put on record his thanks to the conference sponsors for their generosity, without which the conference could not have taken place. Since the previous PLASMA conference in Tsukuba in 2004 the most significant advance in intrinsic Josephson junction (IJJ) research has arguably been the observation of macroscopic quantum tunnelling in IJJs. At the time of the conference this had been observed by both the RIEC/NIMS/AIST collaboration in Japan and by Paul M\\"uller's group in Erlangen. We therefore felt that the conference presented an ideal and timely opportunity for the IJJ community to learn from the more established community of researchers on macroscopic quantum phenomena in low-TC superconductors---and indeed vice versa. As a result a number of leading researchers from the field of low-TC Josephson qubit devices gave several illuminating presentations. Other sessions included those on Josephson vortex dynamics in layered systems and terahertz oscillations in IJJs, in addition to a lively poster session on the first evening. The conference was rounded off by an excellent summary of the highlights of the meeting given by Professor Hu-Jong Lee. The conference organisers would like to thank all those who made the meeting possible and contributed to its smooth running. In addition to the international organising

  12. Waste inspection tomography (WIT)

    SciTech Connect

    Bernardi, R.T.

    1995-10-01

    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting, isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU.

  13. Thermographic Inspection of Aerospace Tankage

    NASA Technical Reports Server (NTRS)

    Bouvier, Carl; Russell, Samuel; Walker, James; Wilkerson, Chuck

    2003-01-01

    Thermography has been shown to be the ideal technical and economic inspection method for two applications - post-machining evaluations and for field inspections of damage and repair. For most manufacturing applications ultrasonic inspections are already available and established. There is no question about the detectability or cost when inspecting hardware out of the autoclave. But when the part is too large to bring to the scanning inspection system or you do not want to remove the hardware from its current setup then a more portable or field applicable inspection is required. This paper will describe two applications of thermography on composite inspections. The NASA NDE Team and Lockheed Martin conducted the work at NASA s George C. Marshall Space Flight Center (MSFC). The first application was inspecting machined hardware. The technique and example data will be presented along with the advantages of thermography. Examples of drilling holes and trimming the edges will be discussed. The second application will be the evaluation of damage in a composite part and the subsequent repair of the region will be presented. The technique, data, and benefits of this application will also be presented along with the follow-up inspection of the post- repaired hardware.

  14. Laser Safety Inspection Criteria

    SciTech Connect

    Barat, K

    2005-02-11

    A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

  15. 49 CFR 213.365 - Visual inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Visual inspections. 213.365 Section 213.365... Visual inspections. (a) All track shall be visually inspected in accordance with the schedule prescribed..., electrical, and other track inspection devices may be used to supplement visual inspection. If a vehicle...

  16. 49 CFR 213.365 - Visual inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Visual inspections. 213.365 Section 213.365... Visual inspections. (a) All track shall be visually inspected in accordance with the schedule prescribed..., electrical, and other track inspection devices may be used to supplement visual inspection. If a vehicle...

  17. 46 CFR 169.237 - Inspection standards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for...

  18. 46 CFR 169.255 - Sanitary inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for...

  19. 46 CFR 169.255 - Sanitary inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for...

  20. 46 CFR 169.237 - Inspection standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for...

  1. 46 CFR 169.255 - Sanitary inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for...

  2. 46 CFR 169.255 - Sanitary inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for...

  3. 46 CFR 169.237 - Inspection standards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for...

  4. 46 CFR 169.237 - Inspection standards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for...

  5. 46 CFR 169.255 - Sanitary inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for...

  6. 46 CFR 169.237 - Inspection standards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for...

  7. Grain quality inspection system

    NASA Technical Reports Server (NTRS)

    Flood, C. A., Jr.; Singletow, D. P.; James, S. N.

    1979-01-01

    A review of grain quality indicators and measurement methods was conducted in order to assess the feasibility of using remote sensing technology to develop a continuous monitoring system for use during grain transfer operations. Most detection methods were found to be too slow or too expensive to be incorporated into the normal inspection procedure of a grain elevator on a continuous basis. Two indicators, moisture content and broken corn and foreign material, show potential for automation and are of an economic value. A microprocessor based system which utilizes commercially available electronic moisture meter was developed and tested. A method for automating BCFM measurement is described. A complete system description is presented along with performance test results.

  8. Industrial Inspection System

    NASA Technical Reports Server (NTRS)

    1993-01-01

    ACTIS+ is a smaller, personal computer version of ACTIS, a computed tomography system which finds its origins in the Apollo lunar landing research. It is used to identify imperfections in aerospace structures and components. Designed to be added to an existing real time radiography system, its components include a high precision rotation/elevation manipulator, color image monitor, graphical user interface monitor, and PC compatible workstation. Cross-sectional CT images are more detailed than radiographic images and the high speed scanning feature offers the capability for 100 percent inspection in a production environment. Bio-Imaging Research, Inc. (BIR) originally developed ACTIS for Marshall Space Flight Center (MSFC), and commercial units were sold to aerospace manufacturers. The technology was refined for ACTIS+, which is principally used in non-destructive testing.

  9. Peripheral inspection of objects

    NASA Astrophysics Data System (ADS)

    Asundi, A.; Sajan, M. R.

    The inspection and profilometry of curved objects is an interesting problem in industrial machine vision. The application of a CCD camera operating in the time delay and integration (TDI) mode, for imaging and contouring the complete periphery of curved objects, is described in this paper. The experimental arrangement is based on projection moiré principles. Rotation of the curved object permits the TDI camera to record a grating pattern modulated by any defect or deformation on the object. Equal depth contours are derived from the deformed grating pattern by using the logical moiré and the scanning moiré techniques. Details of the experimental setup and the moiré contouring principles are explained. The capability of the system is demonstrated by recording the contours of a dented can and a mannequin head.

  10. TPS Inspection and Repair

    NASA Technical Reports Server (NTRS)

    Parazynski, Scott

    2012-01-01

    Dr. Scott Parazynski provided a retrospective on the EVA tools and procedures efforts NASA went through in the aftermath of Columbia for the Shuttle Thermal Protection System (TPS) inspection and repair. He describes his role as the lead astronaut on this effort, and covered all of the Neutral Buoyancy Lab (NBL), KC 135 (reduced gravity aircraft), Precision Air Bearing Floor (PABF), vacuum chamber and 1 G testing that was done in order to develop the tools and techniques that were flown. Parazynski also discusses how the EVA community worked together to resolve a huge safety issue, and how his work in the spacesuit was critical to overcoming a design limitation of the Space Shuttle.

  11. Robotics and industrial inspection

    SciTech Connect

    Casasent, D.P.

    1983-01-01

    Image processing algorithms are discussed, taking into account hidden information in early visual processing, three-dimensional shape recognition by moirecorrelation, spatial-frequency representations of images with scale invariant properties, image-based focusing, the computational structure for the Walsh-Hadamard transform, a hybrid optical/digital moment-based robotic pattern recognition system, affordable implementations of image processing algorithms, and an analysis of low-level computer vision algorithms for implementation on a very large scale integrated processor array. Other topics considered are related to government programs and needs in robotics, DoD research and applications in robotics, time-varying image processing and control, industrial robotics, industrial applications of computer vision, and object perception and mensuration for robotics. Attention is given to laser scanning techniques for automatic inspection of heat-sealed film packages, computer software for robotic vision, and computerized tomography on a logarithmic polar grid.

  12. Inspection system calibration methods

    DOEpatents

    Deason, Vance A.; Telschow, Kenneth L.

    2004-12-28

    An inspection system calibration method includes producing two sideband signals of a first wavefront; interfering the two sideband signals in a photorefractive material, producing an output signal therefrom having a frequency and a magnitude; and producing a phase modulated operational signal having a frequency different from the output signal frequency, a magnitude, and a phase modulation amplitude. The method includes determining a ratio of the operational signal magnitude to the output signal magnitude, determining a ratio of a 1st order Bessel function of the operational signal phase modulation amplitude to a 0th order Bessel function of the operational signal phase modulation amplitude, and comparing the magnitude ratio to the Bessel function ratio.

  13. Fire Inspection Guide for Schools.

    ERIC Educational Resources Information Center

    Virginia State Corp. Commission, Richmond.

    A functional explanation of the "School Fire Prevention Inspection Form" is provided for use by local school and fire department personnel in the Virginia School Fire Prevention Inspection Program. Many helpful suggestions are made for safeguarding occupants of public school buildings from fire hazards. Items discussed are--(1) exit doors, (2)…

  14. Pipe inspection and repair system

    NASA Technical Reports Server (NTRS)

    Schempf, Hagen (Inventor); Mutschler, Edward (Inventor); Chemel, Brian (Inventor); Boehmke, Scott (Inventor); Crowley, William (Inventor)

    2004-01-01

    A multi-module pipe inspection and repair device. The device includes a base module, a camera module, a sensor module, an MFL module, a brush module, a patch set/test module, and a marker module. Each of the modules may be interconnected to construct one of an inspection device, a preparation device, a marking device, and a repair device.

  15. Wavelet Regularization Per Nullspace Shuttle

    NASA Astrophysics Data System (ADS)

    Charléty, J.; Nolet, G.; Sigloch, K.; Voronin, S.; Loris, I.; Simons, F. J.; Daubechies, I.; Judd, S.

    2010-12-01

    Wavelet decomposition of models in an over-parameterized Earth and L1-norm minimization in wavelet space is a promising strategy to deal with the very heterogeneous data coverage in the Earth without sacrificing detail in the solution where this is resolved (see Loris et al., abstract this session). However, L1-norm minimizations are nonlinear, and pose problems of convergence speed when applied to large data sets. In an effort to speed up computations we investigate the application of the nullspace shuttle (Deal and Nolet, GJI 1996). The nullspace shuttle is a filter that adds components from the nullspace to the minimum norm solution so as to have the model satisfy additional conditions not imposed by the data. In our case, the nullspace shuttle projects the model on a truncated basis of wavelets. The convergence of this strategy is unproven, in contrast to algorithms using Landweber iteration or one of its variants, but initial computations using a very large data base give reason for optimism. We invert 430,554 P delay times measured by cross-correlation in different frequency windows. The data are dominated by observations with US Array, leading to a major discrepancy in the resolution beneath North America and the rest of the world. This is a subset of the data set inverted by Sigloch et al (Nature Geosci, 2008), excluding only a small number of ISC delays at short distance and all amplitude data. The model is a cubed Earth model with 3,637,248 voxels spanning mantle and crust, with a resolution everywhere better than 70 km, to which 1912 event corrections are added. In each iteration we determine the optimal solution by a least squares inversion with minimal damping, after which we regularize the model in wavelet space. We then compute the residual data vector (after an intermediate scaling step), and solve for a model correction until a satisfactory chi-square fit for the truncated model is obtained. We present our final results on convergence as well as a

  16. Device for inspecting vessel surfaces

    DOEpatents

    Appel, D. Keith

    1995-01-01

    A portable, remotely-controlled inspection crawler for use along the walls of tanks, vessels, piping and the like. The crawler can be configured to use a vacuum chamber for supporting itself on the inspected surface by suction or a plurality of magnetic wheels for moving the crawler along the inspected surface. The crawler is adapted to be equipped with an ultrasonic probe for mapping the structural integrity or other characteristics of the surface being inspected. Navigation of the crawler is achieved by triangulation techniques between a signal transmitter on the crawler and a pair of microphones attached to a fixed, remote location, such as the crawler's deployment unit. The necessary communications are established between the crawler and computers external to the inspection environment for position control and storage and/or monitoring of data acquisition.

  17. Ultrasonic inspection and deployment apparatus

    DOEpatents

    Michaels, Jennifer E.; Michaels, Thomas E.; Mech, Jr., Stephen J.

    1984-01-01

    An ultrasonic inspection apparatus for the inspection of metal structures, especially installed pipes. The apparatus combines a specimen inspection element, an acoustical velocity sensing element, and a surface profiling element, all in one scanning head. A scanning head bellows contains a volume of oil above the pipe surface, serving as acoustical couplant between the scanning head and the pipe. The scanning head is mounted on a scanning truck which is mobile around a circular track surrounding the pipe. The scanning truck has sufficient motors, gears, and position encoders to allow the scanning head six degrees of motion freedom. A computer system continually monitors acoustical velocity, and uses that parameter to process surface profiling and inspection data. The profiling data is used to automatically control scanning head position and alignment and to define a coordinate system used to identify and interpret inspection data. The apparatus is suitable for highly automated, remote application in hostile environments, particularly high temperature and radiation areas.

  18. Thermographic inspection of massive structures

    SciTech Connect

    Renshaw, Jeremy B.; Guimaraes, Maria; Scott, David B.

    2014-02-18

    Nondestructive Evaluation of concrete structures is a growing concern for the nuclear industry as well as for many other industries. As critical concrete components continue to age, the ability to assess the health and suitability for continued service has become a key consideration. In some cases, repair of these structures is difficult and expensive, while replacement is prohibitively expensive or, in some cases, not feasible. Therefore, the ability to inspect these key assets is a primary concern, especially in the nuclear industry. Due to the large size of containment buildings, cooling towers, and other large concrete assets, the ability to rapidly inspect for defects of concern is very desirable. Thermographic inspection appears to have the required ability to rapidly inspect large structures to ascertain the location and size of many of the defects of concern. This ability was demonstrated by performing a thermographic inspection of a large concrete dam in 2 days.

  19. Thermographic inspection of massive structures

    NASA Astrophysics Data System (ADS)

    Renshaw, Jeremy B.; Guimaraes, Maria; Scott, David B.

    2014-02-01

    Nondestructive Evaluation of concrete structures is a growing concern for the nuclear industry as well as for many other industries. As critical concrete components continue to age, the ability to assess the health and suitability for continued service has become a key consideration. In some cases, repair of these structures is difficult and expensive, while replacement is prohibitively expensive or, in some cases, not feasible. Therefore, the ability to inspect these key assets is a primary concern, especially in the nuclear industry. Due to the large size of containment buildings, cooling towers, and other large concrete assets, the ability to rapidly inspect for defects of concern is very desirable. Thermographic inspection appears to have the required ability to rapidly inspect large structures to ascertain the location and size of many of the defects of concern. This ability was demonstrated by performing a thermographic inspection of a large concrete dam in 2 days.

  20. Radiographic Inspection of Fueled Clads

    SciTech Connect

    Timothy J. Roney; Karen M. Wendt

    2005-04-01

    Five general purpose heat source (GPHS) fueled clads were radiographically inspected at the Idaho National Laboratory (INL). The girth weld region of each clad had previously passed visual examination, ring gauge test, and leak test but showed “positive” indications on the ultrasonic (UT) test. Positive ultrasonic indications are allowable under certain weld conditions; radiographic inspection provides a secondary nonintrusive means of clad inspection and may confirm allowable anomalies from the UT inspection. All the positive UT indications were found to exhibit allowable weld shield fusion or mismatch conditions. No indication of void defects was found. One additional clad (FCO371) was deemed unacceptable for radiographic inspection due to an unknown black substance that obscured the angular origin on the weld so that the angular offset to the UT indication could not be found.

  1. 12 CFR 725.3 - Regular membership.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... advances without approval of the NCUA Board for a period of six months after becoming a member. This subsection shall not apply to any credit union which becomes a Regular member of the Facility within six... member of the Facility at any time within six months prior to becoming a Regular member of the Facility....

  2. Transport Code for Regular Triangular Geometry

    Energy Science and Technology Software Center (ESTSC)

    1993-06-09

    DIAMANT2 solves the two-dimensional static multigroup neutron transport equation in planar regular triangular geometry. Both regular and adjoint, inhomogeneous and homogeneous problems subject to vacuum, reflective or input specified boundary flux conditions are solved. Anisotropy is allowed for the scattering source. Volume and surface sources are allowed for inhomogeneous problems.

  3. Continuum regularization of quantum field theory

    SciTech Connect

    Bern, Z.

    1986-04-01

    Possible nonperturbative continuum regularization schemes for quantum field theory are discussed which are based upon the Langevin equation of Parisi and Wu. Breit, Gupta and Zaks made the first proposal for new gauge invariant nonperturbative regularization. The scheme is based on smearing in the ''fifth-time'' of the Langevin equation. An analysis of their stochastic regularization scheme for the case of scalar electrodynamics with the standard covariant gauge fixing is given. Their scheme is shown to preserve the masslessness of the photon and the tensor structure of the photon vacuum polarization at the one-loop level. Although stochastic regularization is viable in one-loop electrodynamics, two difficulties arise which, in general, ruins the scheme. One problem is that the superficial quadratic divergences force a bottomless action for the noise. Another difficulty is that stochastic regularization by fifth-time smearing is incompatible with Zwanziger's gauge fixing, which is the only known nonperturbaive covariant gauge fixing for nonabelian gauge theories. Finally, a successful covariant derivative scheme is discussed which avoids the difficulties encountered with the earlier stochastic regularization by fifth-time smearing. For QCD the regularized formulation is manifestly Lorentz invariant, gauge invariant, ghost free and finite to all orders. A vanishing gluon mass is explicitly verified at one loop. The method is designed to respect relevant symmetries, and is expected to provide suitable regularization for any theory of interest. Hopefully, the scheme will lend itself to nonperturbative analysis. 44 refs., 16 figs.

  4. Regular Decompositions for H(div) Spaces

    SciTech Connect

    Kolev, Tzanio; Vassilevski, Panayot

    2012-01-01

    We study regular decompositions for H(div) spaces. In particular, we show that such regular decompositions are closely related to a previously studied “inf-sup” condition for parameter-dependent Stokes problems, for which we provide an alternative, more direct, proof.

  5. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  6. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  7. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  8. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  9. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  10. 46 CFR 131.570 - Quarterly inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... inspected once each 3 months. (b) The inspection must involve the removal of drain plugs and the opening of drain valves to ensure that enclosures are free of water. (c) The date of the inspection required...

  11. On regularizations of the Dirac delta distribution

    NASA Astrophysics Data System (ADS)

    Hosseini, Bamdad; Nigam, Nilima; Stockie, John M.

    2016-01-01

    In this article we consider regularizations of the Dirac delta distribution with applications to prototypical elliptic and hyperbolic partial differential equations (PDEs). We study the convergence of a sequence of distributions SH to a singular term S as a parameter H (associated with the support size of SH) shrinks to zero. We characterize this convergence in both the weak-* topology of distributions and a weighted Sobolev norm. These notions motivate a framework for constructing regularizations of the delta distribution that includes a large class of existing methods in the literature. This framework allows different regularizations to be compared. The convergence of solutions of PDEs with these regularized source terms is then studied in various topologies such as pointwise convergence on a deleted neighborhood and weighted Sobolev norms. We also examine the lack of symmetry in tensor product regularizations and effects of dissipative error in hyperbolic problems.

  12. 49 CFR 213.234 - Automated inspection of track constructed with concrete crossties.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... concrete crossties. 213.234 Section 213.234 Transportation Other Regulations Relating to Transportation... § 213.234 Automated inspection of track constructed with concrete crossties. (a) General. Except for... constructed with concrete crossties over which regularly scheduled passenger service trains operate, and...

  13. 49 CFR 213.234 - Automated inspection of track constructed with concrete crossties.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... concrete crossties. 213.234 Section 213.234 Transportation Other Regulations Relating to Transportation... § 213.234 Automated inspection of track constructed with concrete crossties. (a) General. Except for... constructed with concrete crossties over which regularly scheduled passenger service trains operate, and...

  14. 49 CFR 213.234 - Automated inspection of track constructed with concrete crossties.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... concrete crossties. 213.234 Section 213.234 Transportation Other Regulations Relating to Transportation... § 213.234 Automated inspection of track constructed with concrete crossties. (a) General. Except for... constructed with concrete crossties over which regularly scheduled passenger service trains operate, and...

  15. Overview of the 80(th) Annual Scientific Meeting of the Japanese Circulation Society - The Past, Present and Future of Cardiovascular Medicine in Japan - - The 5(th) Anniversary of the Great East Japan Earthquake.

    PubMed

    Takahashi, Jun; Satoh, Kimio; Fukuda, Koji; Sugimura, Koichiro; Matsumoto, Yasuharu; Nakano, Makoto; Tsuburaya, Ryuji; Aoki, Tatsuo; Hao, Kiyotaka; Nishimiya, Kensuke; Ito, Kenta; Sakata, Yasuhiko; Shimokawa, Hiroaki

    2016-07-25

    The 80(th)Annual Scientific Meeting of the Japanese Circulation Society was held in Sendai, Japan, on March 18-20, 2016, which coincided with the 5(th)anniversary of the Great East Japan Earthquake that hit the Tohoku area on March 11, 2011. Thus, the main themes for this meeting were "The Past, Present and Future of Cardiovascular Medicine in Japan" and "The 5(th)Anniversary of the Great East Japan Earthquake". Despite the provincial location, approximately 15,000 people attended during the 3-day meeting, and there were in-depth discussions in each of the various sessions on these themes. Especially, to our great pleasure, the Japanese Royals, Emperor Akihito and Empress Michiko, kindly visited the panel exhibition of the Great East Japan Earthquake and spoke words of appreciation to us. The meeting successfully completed and we sincerely appreciate the great cooperation and support from all affiliates. (Circ J 2016; 80: 1689-1694). PMID:27385500

  16. Lucky guess or knowledge: a cross-sectional study using the Bland and Altman analysis to compare confidence-based testing of pharmacological knowledge in 3rd and 5th year medical students.

    PubMed

    Kampmeyer, Daniela; Matthes, Jan; Herzig, Stefan

    2015-05-01

    Multiple-choice-questions are common in medical examinations, but guessing biases assessment results. Confidence-based-testing (CBT) integrates indicated confidence levels. It has been suggested that correctness of and confidence in an answer together indicate knowledge levels thus determining the quality of a resulting decision. We used a CBT approach to investigate whether decision quality improves during undergraduate medical education. 3rd- and 5th-year students attended formative multiple-choice exams on pharmacological issues. Students were asked to indicate their confidence in a given answer. Correctness of answers was scored binary (1-correct; 0-wrong) and confidence levels were transformed to an ordinal scale (guess: 0; rather unsure: 0.33; rather sure: 0.66; very sure: 1). 5th-year students gave more correct answers (73 ± 16 vs. 49 ± 13 %, p < 0.05) and were on average more confident regarding the correctness of their answers (0.61 ± 0.18 vs. 0.46 ± 0.13, p < 0.05). Correlation of these parameters was stronger for 5th-year students (r = 0.81 vs. r = 0.52), but agreement of confidence and correctness ('centration') was lower. By combining the Bland-and-Altman approach with categories of decision-quality we found that 5th-year students were more likely to be 'well-informed' (41 vs. 5 %), while more 3rd-students were 'uninformed' (24 vs. 76 %). Despite a good correlation of exam results and confidence in given answers increased knowledge might be accompanied by a more critical view at the own abilities. Combining the statistical Bland-and-Altman analysis with a theoretical approach to decision-quality, more advanced students are expected to apply correct beliefs, while their younger fellows are rather at risk to hesitate or to act amiss. PMID:25103688

  17. Visual inspection for CTBT verification

    SciTech Connect

    Hawkins, W.; Wohletz, K.

    1997-03-01

    On-site visual inspection will play an essential role in future Comprehensive Test Ban Treaty (CTBT) verification. Although seismic and remote sensing techniques are the best understood and most developed methods for detection of evasive testing of nuclear weapons, visual inspection can greatly augment the certainty and detail of understanding provided by these more traditional methods. Not only can visual inspection offer ``ground truth`` in cases of suspected nuclear testing, but it also can provide accurate source location and testing media properties necessary for detailed analysis of seismic records. For testing in violation of the CTBT, an offending party may attempt to conceal the test, which most likely will be achieved by underground burial. While such concealment may not prevent seismic detection, evidence of test deployment, location, and yield can be disguised. In this light, if a suspicious event is detected by seismic or other remote methods, visual inspection of the event area is necessary to document any evidence that might support a claim of nuclear testing and provide data needed to further interpret seismic records and guide further investigations. However, the methods for visual inspection are not widely known nor appreciated, and experience is presently limited. Visual inspection can be achieved by simple, non-intrusive means, primarily geological in nature, and it is the purpose of this report to describe the considerations, procedures, and equipment required to field such an inspection.

  18. Fully Employing Software Inspections Data

    NASA Technical Reports Server (NTRS)

    Shull, Forrest; Feldmann, Raimund L.; Seaman, Carolyn; Regardie, Myrna; Godfrey, Sally

    2009-01-01

    Software inspections provide a proven approach to quality assurance for software products of all kinds, including requirements, design, code, test plans, among others. Common to all inspections is the aim of finding and fixing defects as early as possible, and thereby providing cost savings by minimizing the amount of rework necessary later in the lifecycle. Measurement data, such as the number and type of found defects and the effort spent by the inspection team, provide not only direct feedback about the software product to the project team but are also valuable for process improvement activities. In this paper, we discuss NASA's use of software inspections and the rich set of data that has resulted. In particular, we present results from analysis of inspection data that illustrate the benefits of fully utilizing that data for process improvement at several levels. Examining such data across multiple inspections or projects allows team members to monitor and trigger cross project improvements. Such improvements may focus on the software development processes of the whole organization as well as improvements to the applied inspection process itself.

  19. Quantitative regularities in floodplain formation

    NASA Astrophysics Data System (ADS)

    Nevidimova, O.

    2009-04-01

    Quantitative regularities in floodplain formation Modern methods of the theory of complex systems allow to build mathematical models of complex systems where self-organizing processes are largely determined by nonlinear effects and feedback. However, there exist some factors that exert significant influence on the dynamics of geomorphosystems, but hardly can be adequately expressed in the language of mathematical models. Conceptual modeling allows us to overcome this difficulty. It is based on the methods of synergetic, which, together with the theory of dynamic systems and classical geomorphology, enable to display the dynamics of geomorphological systems. The most adequate for mathematical modeling of complex systems is the concept of model dynamics based on equilibrium. This concept is based on dynamic equilibrium, the tendency to which is observed in the evolution of all geomorphosystems. As an objective law, it is revealed in the evolution of fluvial relief in general, and in river channel processes in particular, demonstrating the ability of these systems to self-organization. Channel process is expressed in the formation of river reaches, rifts, meanders and floodplain. As floodplain is a periodically flooded surface during high waters, it naturally connects river channel with slopes, being one of boundary expressions of the water stream activity. Floodplain dynamics is inseparable from the channel dynamics. It is formed at simultaneous horizontal and vertical displacement of the river channel, that is at Y=Y(x, y), where х, y - horizontal and vertical coordinates, Y - floodplain height. When dу/dt=0 (for not lowering river channel), the river, being displaced in a horizontal plane, leaves behind a low surface, which flooding during high waters (total duration of flooding) changes from the maximum during the initial moment of time t0 to zero in the moment tn. In a similar manner changed is the total amount of accumulated material on the floodplain surface

  20. Quantitative regularities in floodplain formation

    NASA Astrophysics Data System (ADS)

    Nevidimova, O.

    2009-04-01

    Quantitative regularities in floodplain formation Modern methods of the theory of complex systems allow to build mathematical models of complex systems where self-organizing processes are largely determined by nonlinear effects and feedback. However, there exist some factors that exert significant influence on the dynamics of geomorphosystems, but hardly can be adequately expressed in the language of mathematical models. Conceptual modeling allows us to overcome this difficulty. It is based on the methods of synergetic, which, together with the theory of dynamic systems and classical geomorphology, enable to display the dynamics of geomorphological systems. The most adequate for mathematical modeling of complex systems is the concept of model dynamics based on equilibrium. This concept is based on dynamic equilibrium, the tendency to which is observed in the evolution of all geomorphosystems. As an objective law, it is revealed in the evolution of fluvial relief in general, and in river channel processes in particular, demonstrating the ability of these systems to self-organization. Channel process is expressed in the formation of river reaches, rifts, meanders and floodplain. As floodplain is a periodically flooded surface during high waters, it naturally connects river channel with slopes, being one of boundary expressions of the water stream activity. Floodplain dynamics is inseparable from the channel dynamics. It is formed at simultaneous horizontal and vertical displacement of the river channel, that is at Y=Y(x, y), where х, y - horizontal and vertical coordinates, Y - floodplain height. When dу/dt=0 (for not lowering river channel), the river, being displaced in a horizontal plane, leaves behind a low surface, which flooding during high waters (total duration of flooding) changes from the maximum during the initial moment of time t0 to zero in the moment tn. In a similar manner changed is the total amount of accumulated material on the floodplain surface

  1. Industrial Color Inspection

    NASA Astrophysics Data System (ADS)

    McCamy, C. S.

    1986-10-01

    Color is a very important property of many products and an essential feature of some. The commercial value of color is evident in the fact that customers reject product that is satisfactory in every other way, but is not the right color. Color isrumerically specified, measured, and controlled just as length or weight are. It has three dimensions: Hue, Value, and Chroma, and may be represented in a three-dimensional space. Colors of objects depend on the illumination and pairs of colors may match in one light but not in another. Controlled illumination is required for color matching. Illuminants were standardized by the International Commission on Illumination (CIE). As a basis for color measurement, the CIE adopted three spectral sensitivity functions representing a standard observer. Color may be measured by instruments using standard illumination and simulating the standard observer. It is better to measure spectral reflectance or transmittance and compute colorimetric quantities. Color may be inspected on a production line and the data obtained can be used to control the process. When production cannot be controlled as precisely as required, product may be sorted by color.

  2. F Reactor Inspection

    SciTech Connect

    Grindstaff, Keith; Hathaway, Boyd; Wilson, Mike

    2014-10-29

    Workers from Mission Support Alliance, LLC., removed the welds around the steel door of the F Reactor before stepping inside the reactor to complete its periodic inspection. This is the first time the Department of Energy (DOE) has had the reactor open since 2008. The F Reactor is one of nine reactors along the Columbia River at the Department's Hanford Site in southeastern Washington State, where environmental cleanup has been ongoing since 1989. As part of the Tri-Party Agreement, the Department completes surveillance and maintenance activities of cocooned reactors periodically to evaluate the structural integrity of the safe storage enclosure and to ensure confinement of any remaining hazardous materials. "This entry marks a transition of sorts because the Hanford Long-Term Stewardship Program, for the first time, was responsible for conducting the entry and surveillance and maintenance activities," said Keith Grindstaff, Energy Department Long-Term Stewardship Program Manager. "As the River Corridor cleanup work is completed and transitioned to long-term stewardship, our program will manage any on-going requirements."

  3. F Reactor Inspection

    ScienceCinema

    Grindstaff, Keith; Hathaway, Boyd; Wilson, Mike

    2014-11-24

    Workers from Mission Support Alliance, LLC., removed the welds around the steel door of the F Reactor before stepping inside the reactor to complete its periodic inspection. This is the first time the Department of Energy (DOE) has had the reactor open since 2008. The F Reactor is one of nine reactors along the Columbia River at the Department's Hanford Site in southeastern Washington State, where environmental cleanup has been ongoing since 1989. As part of the Tri-Party Agreement, the Department completes surveillance and maintenance activities of cocooned reactors periodically to evaluate the structural integrity of the safe storage enclosure and to ensure confinement of any remaining hazardous materials. "This entry marks a transition of sorts because the Hanford Long-Term Stewardship Program, for the first time, was responsible for conducting the entry and surveillance and maintenance activities," said Keith Grindstaff, Energy Department Long-Term Stewardship Program Manager. "As the River Corridor cleanup work is completed and transitioned to long-term stewardship, our program will manage any on-going requirements."

  4. Waste inspection tomography (WIT)

    SciTech Connect

    Bernardi, R.T.

    1996-12-31

    WIT is a self-sufficient mobile semitrailer for nondestructive evaluation and nondestructive assay of nuclear waste drums using x-ray and gamma-ray tomography. The recently completed Phase I included the design, fabrication, and initial testing of all WIT subsystems installed on-board the trailer. Initial test results include 2 MeV digital radiography, computed tomography, Anger camera imaging, single photon emission computed tomography, gamma-ray spectroscopy, collimated gamma scanning, and active and passive computed tomography using a 1.4 mCi source of {sup 166}Ho. These techniques were initially demonstrated on a 55-gallon phantom drum with 3 simulated waste matrices of combustibles, heterogeneous metals, and cement using check sources of gamma active isotopes such as {sup 137}Cs and {sup 133}Ba with 9-250 {mu}Ci activities. Waste matrix identification, isotopic identification, and attenuation-corrected gamma activity determination were demonstrated nondestructively and noninvasively in Phase I. Currently ongoing Phase II involves DOE site field test demonstrations at LLNL, RFETS, and INEL with real nuclear waste drums. Current WIT experience includes 55 gallon drums of cement, graphite, sludge, glass, metals, and combustibles. Thus far WIT has inspected drums with 0-20 gms of {sup 239}Pu.

  5. Final inspection of photomask blanks

    NASA Astrophysics Data System (ADS)

    Schubert, Fredi; Sauerbrei, Hartmut; Aschke, Lutz; Knapp, Konrad

    2001-04-01

    In order to increase the quality in manufacturing of future photon mask generations Schott Lithotec is brought in a brand new, much increased automatic laser inspection system into a new manufacturing line of photo mask blanks. It is in a position to detect additionally to the standard defect types further defect types like dim- and bright-chrome defects. The resolution of the system is less than 100 nm. With a quickly inspecting time per blank of less than three minutes and for the first time in the world used automatic SMIF-pod-handling this is a tool for the 100 percent final inspection in the manufacturing of photo mask blanks.

  6. Procedures for precap visual inspection

    NASA Technical Reports Server (NTRS)

    1984-01-01

    Screening procedures for the final precap visual inspection of microcircuits used in electronic system components are described as an aid in training personnel unfamiliar with microcircuits. Processing techniques used in industry for the manufacture of monolithic and hybrid components are presented and imperfections that may be encountered during this inspection are discussed. Problem areas such as scratches, voids, adhesions, and wire bonding are illustrated by photomicrographs. This guide can serve as an effective tool in training personnel to perform precap visual inspections efficiently and reliably.

  7. PREFACE: MEM07: The 5th Annual Workshop on Mechanical and Electromagnetic Properties of Composite Superconductors (Princeton, NJ, USA, 21 24 August 2007)

    NASA Astrophysics Data System (ADS)

    Larbalestier, D. C.; Osamura, K.; Hampshire, D. P.

    2008-05-01

    MEM07 was the 5th international workshop concentrating on the mechanical and electrical properties of composite superconductors, which are the technological conductor forms from which practical superconducting devices are made. Such superconducting conductors respond to important challenges we currently face, especially those concerned with the proper management of the world's energy resources. Superconductivity provides a means to address the challenges in the generation, transmission and distribution, and use of energy. For energy generation, the ITER Fusion Tokomak (now underway in France) provides exciting new challenges for the whole superconductivity community, due to the enormous size and strong fields of the plasma confinement superconducting magnets that will form the largest and most powerful superconducting machine yet built. Significant attention was paid at MEM07 to the modeling, characterization, testing and validation of the high-amperage Nb3Sn cable-in-conduit conductors needed for ITER. As for electric energy industry uses, there was much discussion of both first generation (Bi,Pb)2Sr2Ca2Cu3Ox conductors and the rapidly emerging second generation coated conductors made from YBa2Cu37-x. High-performing, affordable conductors of these materials are vital for large capacity transmission cables, energy storage systems, fault current limiters, generators and motors—many prototypes of which are being pursued in technologically advanced countries. There is a broad consensus that the prototype stage for high-current-high-field superconducting applications is nearing its end and that large scale applications are technologically feasible. However full industrialization of large-scale superconducting technologies in electric utility applications will benefit from continuous improvement in critical current, lower ac loss, higher strength and other vital conductor properties. The establishment of optimal procedures for the system design accompanying scale

  8. Functional MRI Using Regularized Parallel Imaging Acquisition

    PubMed Central

    Lin, Fa-Hsuan; Huang, Teng-Yi; Chen, Nan-Kuei; Wang, Fu-Nien; Stufflebeam, Steven M.; Belliveau, John W.; Wald, Lawrence L.; Kwong, Kenneth K.

    2013-01-01

    Parallel MRI techniques reconstruct full-FOV images from undersampled k-space data by using the uncorrelated information from RF array coil elements. One disadvantage of parallel MRI is that the image signal-to-noise ratio (SNR) is degraded because of the reduced data samples and the spatially correlated nature of multiple RF receivers. Regularization has been proposed to mitigate the SNR loss originating due to the latter reason. Since it is necessary to utilize static prior to regularization, the dynamic contrast-to-noise ratio (CNR) in parallel MRI will be affected. In this paper we investigate the CNR of regularized sensitivity encoding (SENSE) acquisitions. We propose to implement regularized parallel MRI acquisitions in functional MRI (fMRI) experiments by incorporating the prior from combined segmented echo-planar imaging (EPI) acquisition into SENSE reconstructions. We investigated the impact of regularization on the CNR by performing parametric simulations at various BOLD contrasts, acceleration rates, and sizes of the active brain areas. As quantified by receiver operating characteristic (ROC) analysis, the simulations suggest that the detection power of SENSE fMRI can be improved by regularized reconstructions, compared to unregularized reconstructions. Human motor and visual fMRI data acquired at different field strengths and array coils also demonstrate that regularized SENSE improves the detection of functionally active brain regions. PMID:16032694

  9. Partitioning of regular computation on multiprocessor systems

    NASA Technical Reports Server (NTRS)

    Lee, Fung Fung

    1988-01-01

    Problem partitioning of regular computation over two dimensional meshes on multiprocessor systems is examined. The regular computation model considered involves repetitive evaluation of values at each mesh point with local communication. The computational workload and the communication pattern are the same at each mesh point. The regular computation model arises in numerical solutions of partial differential equations and simulations of cellular automata. Given a communication pattern, a systematic way to generate a family of partitions is presented. The influence of various partitioning schemes on performance is compared on the basis of computation to communication ratio.

  10. Oseledets Regularity Functions for Anosov Flows

    NASA Astrophysics Data System (ADS)

    Simić, Slobodan N.

    2011-07-01

    Oseledets regularity functions quantify the deviation of the growth associated with a dynamical system along its Lyapunov bundles from the corresponding uniform exponential growth. The precise degree of regularity of these functions is unknown. We show that for every invariant Lyapunov bundle of a volume preserving Anosov flow on a closed smooth Riemannian manifold, the corresponding Oseledets regularity functions are in L p ( m), for some p > 0, where m is the probability measure defined by the volume form. We prove an analogous result for essentially bounded cocycles over volume preserving Anosov flows.

  11. Continuum regularization of gauge theory with fermions

    SciTech Connect

    Chan, H.S.

    1987-03-01

    The continuum regularization program is discussed in the case of d-dimensional gauge theory coupled to fermions in an arbitrary representation. Two physically equivalent formulations are given. First, a Grassmann formulation is presented, which is based on the two-noise Langevin equations of Sakita, Ishikawa and Alfaro and Gavela. Second, a non-Grassmann formulation is obtained by regularized integration of the matter fields within the regularized Grassmann system. Explicit perturbation expansions are studied in both formulations, and considerable simplification is found in the integrated non-Grassmann formalism.

  12. Ultrasonic Inspection Of Thick Sections

    NASA Technical Reports Server (NTRS)

    Friant, C. L.; Djordjevic, B. B.; O'Keefe, C. V.; Ferrell, W.; Klutz, T.

    1993-01-01

    Ultrasonics used to inspect large, relatively thick vessels for hidden defects. Report based on experiments in through-the-thickness transmission of ultrasonic waves in both steel and filament-wound composite cases of solid-fuel rocket motors.

  13. Inspecting the reactor vessel penetrations

    SciTech Connect

    Bodson, F.; Fleming, K.W.

    1995-08-01

    The susceptibility of Alloy 600 to Primary Water Stress Corrosion Cracking (PWSCC) continues to plague nuclear power plants. Recently, the problem of PWSCC cracking has manifested itself in Control Rod Drive Mechanism (CRDM) head penetrations in nuclear plants in Europe. Framatome has been extensively involved in the performance of both inspections and repairs of CRDM head penetrations at Electricite de France (EdF) plants. B and W Nuclear Technologies (BWNT), building on Framatome technology, has developed a fully integrated service package and robotic manipulator to inspect and repair CRDM head penetrations for US utilities. Reactor vessel bottom penetration are also made of Alloy 600 and to tackle this potential PWSCC problem at EdF plants, Framatome has been performing specific inspections in order to detect the appearance of the phenomenon. This paper describes the overall range of inspection techniques and toolings developed to address these issues.

  14. Accreditation of veterinary inspection systems.

    PubMed

    Gary, F

    2003-08-01

    Accreditation of Veterinary Services could be a key factor in facilitating international recognition of certificates. For this to occur, accreditation must be conducted within the international normative framework on compliance evaluation. The EN 45004 standard for inspection bodies is the most appropriate organisational reference. It makes a clear distinction between the technical activity of inspection, and decisions which fall within the competence of public authorities. However, there are few international normative texts describing inspection methods, which is a major obstacle to the development of a widely recognised accreditation system. Organisations that accredit inspection bodies exist in many countries, but there are no agreements on multilateral recognition. This paper describes the accreditation cycle and outlines the possibilities for accrediting networks or individual sites. PMID:15884604

  15. Gravity Probe B Inspection

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The space vehicle Gravity Probe B (GP-B) is the relativity experiment developed at Stanford University to test two extraordinary predictions of Albert Einstein's general theory of relativity. The experiment will measure, very precisely, the expected tiny changes in the direction of the spin axes of four gyroscopes contained in an Earth-orbiting satellite at a 400-mile altitude. So free are the gyroscopes from disturbance that they will provide an almost perfect space-time reference system. They will measure how space and time are very slightly warped by the presence of the Earth, and, more profoundly, how the Earth's rotation very slightly drags space-time around with it. These effects, though small for the Earth, have far-reaching implications for the nature of matter and the structure of the Universe. GP-B is among the most thoroughly researched programs ever undertaken by NASA. This is the story of a scientific quest in which physicists and engineers have collaborated closely over many years. Inspired by their quest, they have invented a whole range of technologies that are already enlivening other branches of science and engineering. In this photograph, engineer Gary Reynolds is inspecting the inside of the probe neck during probe thermal repairs. GP-B is scheduled for launch in April 2004 and managed for NASA by the Marshall Space Flight Center. Development of the GP-B is the responsibility of Stanford University along with major subcontractor Lockheed Martin Corporation. (Image credit to Russ Leese, Gravity Probe B, Stanford University)

  16. Surface inspection: Research and development

    NASA Technical Reports Server (NTRS)

    Batchelder, J. S.

    1987-01-01

    Surface inspection techniques are used for process learning, quality verification, and postmortem analysis in manufacturing for a spectrum of disciplines. First, trends in surface analysis are summarized for integrated circuits, high density interconnection boards, and magnetic disks, emphasizing on-line applications as opposed to off-line or development techniques. Then, a closer look is taken at microcontamination detection from both a patterned defect and a particulate inspection point of view.

  17. Underwater welding, cutting and inspection

    SciTech Connect

    Tsai, C.L. . Ohio Underwater Welding Center)

    1995-02-01

    Underwater welding, cutting and inspection of offshore, inland waterway and port facilities are becoming a requirement for both military and industrial communities, as maintenance and repair costs continue to escalate, and as many of the facilities are in operation well beyond their intended design life. In nuclear applications, underwater welding, cutting and inspection for repair and modification of irradiated nuclear power plant components are also a requirement. This article summarizes recent developments in this emerging underwater technology.

  18. The Volume of the Regular Octahedron

    ERIC Educational Resources Information Center

    Trigg, Charles W.

    1974-01-01

    Five methods are given for computing the area of a regular octahedron. It is suggested that students first construct an octahedron as this will aid in space visualization. Six further extensions are left for the reader to try. (LS)

  19. Regular Exercise May Boost Prostate Cancer Survival

    MedlinePlus

    ... nih.gov/medlineplus/news/fullstory_158374.html Regular Exercise May Boost Prostate Cancer Survival Study found that ... HealthDay News) -- Sticking to a moderate or intense exercise regimen may improve a man's odds of surviving ...

  20. Regular Exercise: Antidote for Deadly Diseases?

    MedlinePlus

    ... https://medlineplus.gov/news/fullstory_160326.html Regular Exercise: Antidote for Deadly Diseases? High levels of physical ... Aug. 9, 2016 (HealthDay News) -- Getting lots of exercise may reduce your risk for five common diseases, ...

  1. Scaling behavior of regularized bosonic strings

    NASA Astrophysics Data System (ADS)

    Ambjørn, J.; Makeenko, Y.

    2016-03-01

    We implement a proper-time UV regularization of the Nambu-Goto string, introducing an independent metric tensor and the corresponding Lagrange multiplier, and treating them in the mean-field approximation justified for long strings and/or when the dimension of space-time is large. We compute the regularized determinant of the 2D Laplacian for the closed string winding around a compact dimension, obtaining in this way the effective action, whose minimization determines the energy of the string ground state in the mean-field approximation. We discuss the existence of two scaling limits when the cutoff is taken to infinity. One scaling limit reproduces the results obtained by the hypercubic regularization of the Nambu-Goto string as well as by the use of the dynamical triangulation regularization of the Polyakov string. The other scaling limit reproduces the results obtained by canonical quantization of the Nambu-Goto string.

  2. Nonminimal black holes with regular electric field

    NASA Astrophysics Data System (ADS)

    Balakin, Alexander B.; Zayats, Alexei E.

    2015-05-01

    We discuss the problem of identification of coupling constants, which describe interactions between photons and spacetime curvature, using exact regular solutions to the extended equations of the nonminimal Einstein-Maxwell theory. We argue the idea that three nonminimal coupling constants in this theory can be reduced to the single guiding parameter, which plays the role of nonminimal radius. We base our consideration on two examples of exact solutions obtained earlier in our works: the first of them describes a nonminimal spherically symmetric object (star or black hole) with regular radial electric field; the second example represents a nonminimal Dirac-type object (monopole or black hole) with regular metric. We demonstrate that one of the inflexion points of the regular metric function identifies a specific nonminimal radius, thus marking the domain of dominance of nonminimal interactions.

  3. Parallelization of irregularly coupled regular meshes

    NASA Technical Reports Server (NTRS)

    Chase, Craig; Crowley, Kay; Saltz, Joel; Reeves, Anthony

    1992-01-01

    Regular meshes are frequently used for modeling physical phenomena on both serial and parallel computers. One advantage of regular meshes is that efficient discretization schemes can be implemented in a straight forward manner. However, geometrically-complex objects, such as aircraft, cannot be easily described using a single regular mesh. Multiple interacting regular meshes are frequently used to describe complex geometries. Each mesh models a subregion of the physical domain. The meshes, or subdomains, can be processed in parallel, with periodic updates carried out to move information between the coupled meshes. In many cases, there are a relatively small number (one to a few dozen) subdomains, so that each subdomain may also be partitioned among several processors. We outline a composite run-time/compile-time approach for supporting these problems efficiently on distributed-memory machines. These methods are described in the context of a multiblock fluid dynamics problem developed at LaRC.

  4. Blind Poissonian images deconvolution with framelet regularization.

    PubMed

    Fang, Houzhang; Yan, Luxin; Liu, Hai; Chang, Yi

    2013-02-15

    We propose a maximum a posteriori blind Poissonian images deconvolution approach with framelet regularization for the image and total variation (TV) regularization for the point spread function. Compared with the TV based methods, our algorithm not only suppresses noise effectively but also recovers edges and detailed information. Moreover, the split Bregman method is exploited to solve the resulting minimization problem. Comparative results on both simulated and real images are reported. PMID:23455078

  5. Regularized CT reconstruction on unstructured grid

    NASA Astrophysics Data System (ADS)

    Chen, Yun; Lu, Yao; Ma, Xiangyuan; Xu, Yuesheng

    2016-04-01

    Computed tomography (CT) is an ill-posed problem. Reconstruction on unstructured grid reduces the computational cost and alleviates the ill-posedness by decreasing the dimension of the solution space. However, there was no systematic study on edge-preserving regularization methods for CT reconstruction on unstructured grid. In this work, we propose a novel regularization method for CT reconstruction on unstructured grid, such as triangular or tetrahedral meshes generated from the initial images reconstructed via analysis reconstruction method (e.g., filtered back-projection). The proposed regularization method is modeled as a three-term optimization problem, containing a weighted least square fidelity term motivated by the simultaneous algebraic reconstruction technique (SART). The related cost function contains two non-differentiable terms, which bring difficulty to the development of the fast solver. A fixed-point proximity algorithm with SART is developed for solving the related optimization problem, and accelerating the convergence. Finally, we compare the regularized CT reconstruction method to SART with different regularization methods. Numerical experiments demonstrated that the proposed regularization method on unstructured grid is effective to suppress noise and preserve edge features.

  6. Continuum regularization of quantum field theory

    SciTech Connect

    Bern, Z.

    1986-01-01

    Breit, Gupta, and Zaks made the first proposal for new gauge invariant nonperturbative regularization. The scheme is based on smearing in the fifth-time of the Langevin equation. An analysis of their stochastic regularization scheme for the case of scalar electrodynamics with the standard covariant gauge fixing is given. Their scheme is shown to preserve the masslessness of the photon and the tensor structure of the photon vacuum polarization at the one-loop level. Although stochastic regularization is viable in one-loop electrodynamics, difficulties arise which, in general, ruins the scheme. A successful covariant derivative scheme is discussed which avoids the difficulties encountered with the earlier stochastic regularization by fifth-time smearing. For QCD the regularized formulation is manifestly Lorentz invariant, gauge invariant, ghost free and finite to all orders. A vanishing gluon mass is explicitly verified at one loop. The method is designed to respect relevant symmetries, and is expected to provide suitable regularization for any theory of interest.

  7. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age,...

  8. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age,...

  9. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age,...

  10. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age,...

  11. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age,...

  12. 7 CFR 353.6 - Inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 5 2012-01-01 2012-01-01 false Inspection. 353.6 Section 353.6 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORT CERTIFICATION § 353.6 Inspection. Inspections shall be performed by agents, by inspectors, or by employees of a State...

  13. 24 CFR 983.103 - Inspecting units.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... are specified in 24 CFR 982.404(b).) (3) In conducting PHA supervisory quality control HQS inspections... sample of inspected contract units in a building fail the initial inspection, the PHA must reinspect 100... inspection—(1) Inspection of site. The PHA must examine the proposed site before the proposal selection...

  14. 24 CFR 983.103 - Inspecting units.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... are specified in 24 CFR 982.404(b).) (3) In conducting PHA supervisory quality control HQS inspections... sample of inspected contract units in a building fail the initial inspection, the PHA must reinspect 100... inspection—(1) Inspection of site. The PHA must examine the proposed site before the proposal selection...

  15. 24 CFR 983.103 - Inspecting units.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... are specified in 24 CFR 982.404(b).) (3) In conducting PHA supervisory quality control HQS inspections... sample of inspected contract units in a building fail the initial inspection, the PHA must reinspect 100... inspection—(1) Inspection of site. The PHA must examine the proposed site before the proposal selection...

  16. 24 CFR 983.103 - Inspecting units.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... are specified in 24 CFR 982.404(b).) (3) In conducting PHA supervisory quality control HQS inspections... sample of inspected contract units in a building fail the initial inspection, the PHA must reinspect 100... inspection—(1) Inspection of site. The PHA must examine the proposed site before the proposal selection...

  17. 15 CFR 717.2 - Challenge inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... host and escort the international Inspection Team for challenge inspections in the United States of... hours, unless extended by agreement between the Inspection Team and the Host Team Leader. (d) Scope and... inspections. Consistent with the provisions of the Convention, the Host Team will ensure, to the...

  18. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  19. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  20. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  1. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  2. 46 CFR 115.818 - Sanitary inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Sanitary inspection. 115.818 Section 115.818 Shipping... Inspections § 115.818 Sanitary inspection. At each inspection for certification and at every other vessel... be examined to determine that they are serviceable and in a sanitary condition....

  3. 46 CFR 115.818 - Sanitary inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Sanitary inspection. 115.818 Section 115.818 Shipping... Inspections § 115.818 Sanitary inspection. At each inspection for certification and at every other vessel... be examined to determine that they are serviceable and in a sanitary condition....

  4. Proceedings: EPRI Second Phased Array Inspection Seminar

    SciTech Connect

    2001-11-01

    The Second EPRI Phased Array Inspection Seminar focused on industrial applications of phased array technology that have been achieved to date or are planned for the near future. Presentations were made by developers of inspection techniques, inspection services vendors, and utility personnel who have performed inspections using arrays.

  5. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  6. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  7. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  8. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  9. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  10. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  11. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  12. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  13. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  14. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  15. 7 CFR 989.105 - Inspection point.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Inspection point. 989.105 Section 989.105 Agriculture... CALIFORNIA Administrative Rules and Regulations Definitions § 989.105 Inspection point. Inspection point... handler, and which is so designated by the Committee. The inspection point(s) of the handler shall...

  16. 7 CFR 989.105 - Inspection point.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Inspection point. 989.105 Section 989.105 Agriculture... CALIFORNIA Administrative Rules and Regulations Definitions § 989.105 Inspection point. Inspection point... handler, and which is so designated by the Committee. The inspection point(s) of the handler shall...

  17. 75 FR 81965 - Grain Inspection Advisory Committee Reestablishment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-29

    ...; ] DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration Grain Inspection Advisory Committee Reestablishment AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA. ACTION... reestablished the Grain Inspection, Packers and Stockyards Administration (GIPSA) Grain Inspection...

  18. 77 FR 76452 - Grain Inspection Advisory Committee Reestablishment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-28

    ... Grain Inspection, Packers and Stockyards Administration Grain Inspection Advisory Committee Reestablishment AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA. ACTION: Notice to... Grain Inspection, Packers and Stockyards Administration (GIPSA) Grain Inspection Advisory...

  19. A study of defects on EUV mask using blank inspection, patterned mask inspection, and wafer inspection

    SciTech Connect

    Huh, S.; Ren, L.; Chan, D.; Wurm, S.; Goldberg, K. A.; Mochi, I.; Nakajima, T.; Kishimoto, M.; Ahn, B.; Kang, I.; Park, J.-O.; Cho, K.; Han, S.-I.; Laursen, T.

    2010-03-12

    The availability of defect-free masks remains one of the key challenges for inserting extreme ultraviolet lithography (EUVL) into high volume manufacturing. yet link data is available for understanding native defects on real masks. In this paper, a full-field EUV mask is fabricated to investigate the printability of various defects on the mask. The printability of defects and identification of their source from mask fabrication to handling were studied using wafer inspection. The printable blank defect density excluding particles and patterns is 0.63 cm{sup 2}. Mask inspection is shown to have better sensitivity than wafer inspection. The sensitivity of wafer inspection must be improved using through-focus analysis and a different wafer stack.

  20. Usual Source of Care in Preventive Service Use: A Regular Doctor versus a Regular Site

    PubMed Central

    Xu, K Tom

    2002-01-01

    Objective To compare the effects of having a regular doctor and having a regular site on five preventive services, controlling for the endogeneity of having a usual source of care. Data Source The Medical Expenditure Panel Survey 1996 conducted by the Agency for Healthcare Research and Quality and the National Center for Health Statistics. Study Design Mammograms, pap smears, blood pressure checkups, cholesterol level checkups, and flu shots were examined. A modified behavioral model framework was presented, which controlled for the endogeneity of having a usual source of care. Based on this framework, a two-equation empirical model was established to predict the probabilities of having a regular doctor and having a regular site, and use of each type of preventive service. Principal Findings Having a regular doctor was found to have a greater impact than having a regular site on discretional preventive services, such as blood pressure and cholesterol level checkups. No statistically significant differences were found between the effects a having a regular doctor and having a regular site on the use of flu shots, pap smears, and mammograms. Among the five preventive services, having a usual source of care had the greatest impact on cholesterol level checkups and pap smears. Conclusions Promoting a stable physician–patient relationship can improve patients’ timely receipt of clinical prevention. For certain preventive services, having a regular doctor is more effective than having a regular site. PMID:12546284

  1. ROBOTIC TANK INSPECTION END EFFECTOR

    SciTech Connect

    Rachel Landry

    1999-10-01

    The objective of this contract between Oceaneering Space Systems (OSS) and the Department of Energy (DOE) was to provide a tool for the DOE to inspect the inside tank walls of underground radioactive waste storage tanks in their tank farms. Some of these tanks are suspected to have leaks, but the harsh nature of the environment within the tanks precludes human inspection of tank walls. As a result of these conditions only a few inspection methods can fulfill this task. Of the methods available, OSS chose to pursue Alternating Current Field Measurement (ACFM), because it does not require clean surfaces for inspection, nor any contact with the Surface being inspected, and introduces no extra by-products in the inspection process (no coupling fluids or residues are left behind). The tool produced by OSS is the Robotic Tank Inspection End Effector (RTIEE), which is initially deployed on the tip of the Light Duty Utility Arm (LDUA). The RTEE combines ACFM with a color video camera for both electromagnetic and visual inspection The complete package consists of an end effector, its corresponding electronics and software, and a user's manual to guide the operator through an inspection. The system has both coarse and fine inspection modes and allows the user to catalog defects and suspected areas of leakage in a database for further examination, which may lead to emptying the tank for repair, decommissioning, etc.. The following is an updated report to OSS document OSS-21100-7002, which was submitted in 1995. During the course of the contract, two related subtasks arose, the Wall and Coating Thickness Sensor and the Vacuum Scarifying and Sampling Tool Assembly. The first of these subtasks was intended to evaluate the corrosion and wall thinning of 55-gallon steel drums. The second was retrieved and characterized the waste material trapped inside the annulus region of the underground tanks on the DOE's tank farms. While these subtasks were derived from the original intent of

  2. In Situ Robotic Inspection Of Welds

    NASA Technical Reports Server (NTRS)

    Van Wyk, Lisa M.; Garcia, Raul C., Jr.; Gilbert, Jeffrey L.

    1992-01-01

    Automated system reduces delays in inspection and rework. System reduces inspection-and-rework delay from days to hours. Path of inspection sensors taken directly from welding path saving time in programming for inspection. Inspection data stored so not lost as inspection equipment turned off. Same robot welding workpiece used to inspect it. In preparation, welding tool mounted on end effector of robot replaced with eddy-current or ultrasonic sensor. Robot recalls welding path from memory and retraces it, recording sensor output as it proceeds.

  3. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  4. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  5. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  6. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  7. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  8. Development of Inspection Robots for Bridge Cables

    PubMed Central

    Kim, Se-Hoon; Lee, Jong-Jae

    2013-01-01

    This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented. PMID:24459453

  9. Improvements in GRACE Gravity Fields Using Regularization

    NASA Astrophysics Data System (ADS)

    Save, H.; Bettadpur, S.; Tapley, B. D.

    2008-12-01

    The unconstrained global gravity field models derived from GRACE are susceptible to systematic errors that show up as broad "stripes" aligned in a North-South direction on the global maps of mass flux. These errors are believed to be a consequence of both systematic and random errors in the data that are amplified by the nature of the gravity field inverse problem. These errors impede scientific exploitation of the GRACE data products, and limit the realizable spatial resolution of the GRACE global gravity fields in certain regions. We use regularization techniques to reduce these "stripe" errors in the gravity field products. The regularization criteria are designed such that there is no attenuation of the signal and that the solutions fit the observations as well as an unconstrained solution. We have used a computationally inexpensive method, normally referred to as "L-ribbon", to find the regularization parameter. This paper discusses the characteristics and statistics of a 5-year time-series of regularized gravity field solutions. The solutions show markedly reduced stripes, are of uniformly good quality over time, and leave little or no systematic observation residuals, which is a frequent consequence of signal suppression from regularization. Up to degree 14, the signal in regularized solution shows correlation greater than 0.8 with the un-regularized CSR Release-04 solutions. Signals from large-amplitude and small-spatial extent events - such as the Great Sumatra Andaman Earthquake of 2004 - are visible in the global solutions without using special post-facto error reduction techniques employed previously in the literature. Hydrological signals as small as 5 cm water-layer equivalent in the small river basins, like Indus and Nile for example, are clearly evident, in contrast to noisy estimates from RL04. The residual variability over the oceans relative to a seasonal fit is small except at higher latitudes, and is evident without the need for de-striping or

  10. Examination of the association between announced inspections and inspection scores.

    PubMed

    Waters, A Blake; VanDerslice, James; Porucznik, Christina A; Kim, Jaewhan; DeLegge, Royal; Durrant, Lynne

    2013-09-01

    In 2010 the Salt Lake Valley Health Department conducted a pilot of an announced inspection program utilizing a randomized assignment of restaurants to an intervention group with announced inspections and a control group that remained on the usual schedule of unannounced inspections. After adjusting for food type, visible kitchen, outside quality assurance, season, and standardized inspector, significant reductions were found in the odds ratios of personal hygiene (adjusted odds ratios [aOR] = 0.11, p = .00) and equipment cleanliness (aOR = 0.19, p = .00) violations. In the models for the control group, none of the odds ratios were statistically different from one, indicating no change in the postintervention time period as compared to the preintervention period. PMID:24073484

  11. A new approach for defect inspection on large area masks

    NASA Astrophysics Data System (ADS)

    Scheuring, Gerd; Döbereiner, Stefan; Hillmann, Frank; Falk, Günther; Brück, Hans-Jürgen

    2007-02-01

    Besides the mask market for IC manufacturing, which mainly uses 6 inch sized masks, the market for the so called large area masks is growing very rapidly. Typical applications of these masks are mainly wafer bumping for current packaging processes, color filters on TFTs, and Flip Chip manufacturing. To expose e.g. bumps and similar features on 200 mm wafers under proximity exposure conditions 9 inch masks are used, while in 300 mm wafer bumping processes (Fig. 1) 14 inch masks are handled. Flip Chip manufacturing needs masks up to 28 by 32 inch. This current maximum mask dimension is expected to hold for the next 5 years in industrial production. On the other hand shrinking feature sizes, just as in case of the IC masks, demand enhanced sensitivity of the inspection tools. A defect inspection tool for those masks is valuable for both the mask maker, who has to deliver a defect free mask to his customer, and for the mask user to supervise the mask behavior conditions during its lifetime. This is necessary because large area masks are mainly used for proximity exposures. During this process itself the mask is vulnerable by contacting the resist on top of the wafers. Therefore a regular inspection of the mask after 25, 50, or 100 exposures has to be done during its whole lifetime. Thus critical resist contamination and other defects, which lead to yield losses, can be recognized early. In the future shrinking feature dimensions will require even more sensitive and reliable defect inspection methods than they do presently. Besides the sole inspection capability the tools should also provide highly precise measurement capabilities and extended review options.

  12. Oxygen saturation resolution influences regularity measurements.

    PubMed

    Garde, Ainara; Karlen, Walter; Dehkordi, Parastoo; Ansermino, J Mark; Dumont, Guy A

    2014-01-01

    The measurement of regularity in the oxygen saturation (SpO(2)) signal has been suggested for use in identifying subjects with sleep disordered breathing (SDB). Previous work has shown that children with SDB have lower SpO(2) regularity than subjects without SDB (NonSDB). Regularity was measured using non-linear methods like approximate entropy (ApEn), sample entropy (SamEn) and Lempel-Ziv (LZ) complexity. Different manufacturer's pulse oximeters provide SpO(2) at various resolutions and the effect of this resolution difference on SpO(2) regularity, has not been studied. To investigate this effect, we used the SpO(2) signal of children with and without SDB, recorded from the Phone Oximeter (0.1% resolution) and the same SpO(2) signal rounded to the nearest integer (artificial 1% resolution). To further validate the effect of rounding, we also used the SpO(2) signal (1% resolution) recorded simultaneously from polysomnography (PSG), as a control signal. We estimated SpO(2) regularity by computing the ApEn, SamEn and LZ complexity, using a 5-min sliding window and showed that different resolutions provided significantly different results. The regularity calculated using 0.1% SpO(2) resolution provided no significant differences between SDB and NonSDB. However, the artificial 1% resolution SpO(2) provided significant differences between SDB and NonSDB, showing a more random SpO(2) pattern (lower SpO(2) regularity) in SDB children, as suggested in the past. Similar results were obtained with the SpO(2) recorded from PSG (1% resolution), which further validated that this SpO(2) regularity change was due to the rounding effect. Therefore, the SpO(2) resolution has a great influence in regularity measurements like ApEn, SamEn and LZ complexity that should be considered when studying the SpO(2) pattern in children with SDB. PMID:25570437

  13. Modified sparse regularization for electrical impedance tomography.

    PubMed

    Fan, Wenru; Wang, Huaxiang; Xue, Qian; Cui, Ziqiang; Sun, Benyuan; Wang, Qi

    2016-03-01

    Electrical impedance tomography (EIT) aims to estimate the electrical properties at the interior of an object from current-voltage measurements on its boundary. It has been widely investigated due to its advantages of low cost, non-radiation, non-invasiveness, and high speed. Image reconstruction of EIT is a nonlinear and ill-posed inverse problem. Therefore, regularization techniques like Tikhonov regularization are used to solve the inverse problem. A sparse regularization based on L1 norm exhibits superiority in preserving boundary information at sharp changes or discontinuous areas in the image. However, the limitation of sparse regularization lies in the time consumption for solving the problem. In order to further improve the calculation speed of sparse regularization, a modified method based on separable approximation algorithm is proposed by using adaptive step-size and preconditioning technique. Both simulation and experimental results show the effectiveness of the proposed method in improving the image quality and real-time performance in the presence of different noise intensities and conductivity contrasts. PMID:27036798

  14. Assessment of regularization techniques for electrocardiographic imaging

    PubMed Central

    Milanič, Matija; Jazbinšek, Vojko; MacLeod, Robert S.; Brooks, Dana H.; Hren, Rok

    2014-01-01

    A widely used approach to solving the inverse problem in electrocardiography involves computing potentials on the epicardium from measured electrocardiograms (ECGs) on the torso surface. The main challenge of solving this electrocardiographic imaging (ECGI) problem lies in its intrinsic ill-posedness. While many regularization techniques have been developed to control wild oscillations of the solution, the choice of proper regularization methods for obtaining clinically acceptable solutions is still a subject of ongoing research. However there has been little rigorous comparison across methods proposed by different groups. This study systematically compared various regularization techniques for solving the ECGI problem under a unified simulation framework, consisting of both 1) progressively more complex idealized source models (from single dipole to triplet of dipoles), and 2) an electrolytic human torso tank containing a live canine heart, with the cardiac source being modeled by potentials measured on a cylindrical cage placed around the heart. We tested 13 different regularization techniques to solve the inverse problem of recovering epicardial potentials, and found that non-quadratic methods (total variation algorithms) and first-order and second-order Tikhonov regularizations outperformed other methodologies and resulted in similar average reconstruction errors. PMID:24369741

  15. On the inability of magnetically constricted transition regions to account for the 10 to the 5th to 10 to the 6th K plasma in the quiet solar atmosphere

    NASA Technical Reports Server (NTRS)

    Dowdy, James F., Jr.; Moore, Ronald L.; Emslie, A. Gordon

    1987-01-01

    Static models of the plasma in the quiet solar atmosphere incorporating not only conduction and radiation but also the effects of large magnetic constrictions are examined. It is found that the bulk of the solar plasma at temperatures below 7 x 10 to the 5th K cannot be produced by a conductive transition region when it is modeled by flux tubes with constriction compatible with observations. The present findings suggest that the major portion of the UEV plasma may be maintained in an ensemble of small, individual magnetic loops located within the supergranular network and having peak temperatures ranging from chromospheric to coronal values.

  16. Serpentine Robots for Inspection Tasks

    SciTech Connect

    Choset, Howie

    2003-09-11

    Serpentine robots are snake like devices that can use their internal degrees of freedom to thread through tightly packed volumes accessing locations that people or conventional machinery cannot. These devices are ideally suited for minimally invasive inspection tasks where the surrounding areas do not have to be disturbed. Applications for these devices are therefore inspection of underground tanks and other storage facilities for classification purposes. This work deals with the design, construction, and control of a serpentine robot. The challenges lie in developing a device that can lift itself in three dimensions, which is necessary for the inspection tasks. The other challenge in control deals with coordinating all of the internal degrees of freedom to exact purposeful motion.

  17. Perturbations in a regular bouncing universe

    SciTech Connect

    Battefeld, T.J.; Geshnizjani, G.

    2006-03-15

    We consider a simple toy model of a regular bouncing universe. The bounce is caused by an extra timelike dimension, which leads to a sign flip of the {rho}{sup 2} term in the effective four dimensional Randall Sundrum-like description. We find a wide class of possible bounces: big bang avoiding ones for regular matter content, and big rip avoiding ones for phantom matter. Focusing on radiation as the matter content, we discuss the evolution of scalar, vector and tensor perturbations. We compute a spectral index of n{sub s}=-1 for scalar perturbations and a deep blue index for tensor perturbations after invoking vacuum initial conditions, ruling out such a model as a realistic one. We also find that the spectrum (evaluated at Hubble crossing) is sensitive to the bounce. We conclude that it is challenging, but not impossible, for cyclic/ekpyrotic models to succeed, if one can find a regularized version.

  18. Shadow of rotating regular black holes

    NASA Astrophysics Data System (ADS)

    Abdujabbarov, Ahmadjon; Amir, Muhammed; Ahmedov, Bobomurat; Ghosh, Sushant G.

    2016-05-01

    We study the shadows cast by the different types of rotating regular black holes viz. Ayón-Beato-García (ABG), Hayward, and Bardeen. These black holes have in addition to the total mass (M ) and rotation parameter (a ), different parameters as electric charge (Q ), deviation parameter (g ), and magnetic charge (g*). Interestingly, the size of the shadow is affected by these parameters in addition to the rotation parameter. We found that the radius of the shadow in each case decreases monotonically, and the distortion parameter increases when the values of these parameters increase. A comparison with the standard Kerr case is also investigated. We have also studied the influence of the plasma environment around regular black holes to discuss its shadow. The presence of the plasma affects the apparent size of the regular black hole's shadow to be increased due to two effects: (i) gravitational redshift of the photons and (ii) radial dependence of plasma density.

  19. Strong regularizing effect of integrable systems

    SciTech Connect

    Zhou, Xin

    1997-11-01

    Many time evolution problems have the so-called strong regularization effect, that is, with any irregular initial data, as soon as becomes greater than 0, the solution becomes C{sup {infinity}} for both spacial and temporal variables. This paper studies 1 x 1 dimension integrable systems for such regularizing effect. In the work by Sachs, Kappler [S][K], (see also earlier works [KFJ] and [Ka]), strong regularizing effect is proved for KdV with rapidly decaying irregular initial data, using the inverse scattering method. There are two equivalent Gel`fand-Levitan-Marchenko (GLM) equations associated to an inverse scattering problem, one is normalized at x = {infinity} and another at x = {infinity}. The method of [S][K] relies on the fact that the KdV waves propagate only in one direction and therefore one of the two GLM equations remains normalized and can be differentiated infinitely many times. 15 refs.

  20. Regularized image recovery in scattering media.

    PubMed

    Schechner, Yoav Y; Averbuch, Yuval

    2007-09-01

    When imaging in scattering media, visibility degrades as objects become more distant. Visibility can be significantly restored by computer vision methods that account for physical processes occurring during image formation. Nevertheless, such recovery is prone to noise amplification in pixels corresponding to distant objects, where the medium transmittance is low. We present an adaptive filtering approach that counters the above problems: while significantly improving visibility relative to raw images, it inhibits noise amplification. Essentially, the recovery formulation is regularized, where the regularization adapts to the spatially varying medium transmittance. Thus, this regularization does not blur close objects. We demonstrate the approach in atmospheric and underwater experiments, based on an automatic method for determining the medium transmittance. PMID:17627052

  1. An explorative approach for inspecting Kepler data

    NASA Astrophysics Data System (ADS)

    Kügler, S. D.; Gianniotis, N.; Polsterer, K. L.

    2016-02-01

    The Kepler survey has provided a wealth of astrophysical knowledge by continuously monitoring over 150 000 stars. The resulting data base contains thousands of examples of known variability types and at least as many that cannot be classified yet. In order to reveal the knowledge hidden in the data base, we introduce a new visualization method that allows us to inspect regularly sampled time series in an explorative fashion. To that end, we propose dimensionality reduction on the parameters of a model capable of representing time series as fixed-length vector representation. We show that a more refined objective function can be chosen by minimizing the reconstruction error, that is the deviation between prediction and observation, of the observed time series instead of reconstructing model parameters. The proposed visualization exhibits a strong correlation between the variability behaviour of the light curves and their physical properties. As a consequence, temperature and surface gravity can, for some stars, be directly inferred from non- (or quasi-) periodic light curves.

  2. Evaluation of inservice inspection examinatiions

    SciTech Connect

    Aldrich, D.A.; Cook, J.F.

    1990-05-01

    In order to evaluate the effectiveness of Section 11, Division 1, ``Rules for Inservice Inspection of Nuclear Power Plant Components,`` of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code examinations, 26 inservice inspection (ISI) summary reports from 24 facilities were reviewed. It was found that these ASME Code examinations and tests are instrumental in revealing indications and defects in welds and plant components. In addition, this study uncovered that fact that some of the Section 11 requirements are apparently not clear and are misunderstood by some of the facilities. Also, the need for more stringent requirements was evaluated and some Code changes are recommended.

  3. Evaluation of inservice inspection examinatiions

    SciTech Connect

    Aldrich, D.A.; Cook, J.F.

    1990-05-01

    In order to evaluate the effectiveness of Section 11, Division 1, Rules for Inservice Inspection of Nuclear Power Plant Components,'' of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code examinations, 26 inservice inspection (ISI) summary reports from 24 facilities were reviewed. It was found that these ASME Code examinations and tests are instrumental in revealing indications and defects in welds and plant components. In addition, this study uncovered that fact that some of the Section 11 requirements are apparently not clear and are misunderstood by some of the facilities. Also, the need for more stringent requirements was evaluated and some Code changes are recommended.

  4. Guided acoustic wave inspection system

    DOEpatents

    Chinn, Diane J.

    2004-10-05

    A system for inspecting a conduit for undesirable characteristics. A transducer system induces guided acoustic waves onto said conduit. The transducer system detects the undesirable characteristics of the conduit by receiving guided acoustic waves that contain information about the undesirable characteristics. The conduit has at least two sides and the transducer system utilizes flexural modes of propagation to provide inspection using access from only the one side of the conduit. Cracking is detected with pulse-echo testing using one transducer to both send and receive the guided acoustic waves. Thinning is detected in through-transmission testing where one transducer sends and another transducer receives the guided acoustic waves.

  5. [Why regular physical activity favors longevity].

    PubMed

    Pentimone, F; Del Corso, L

    1998-06-01

    Regular physical exercise is useful at all ages. In the elderly, even a gentle exercise programme consisting of walking, bicycling, playing golf if performed constantly increases longevity by preventing the onset of the main diseases or alleviating the handicaps they may have caused. Cardiovascular diseases, which represent the main cause of death in the elderly, and osteoporosis, a disabling disease potentially capable of shortening life expectancy, benefit from physical exercise which if performed regularly well before the start of old age may help to prevent them. Over the past few years there has been growing evidence of the concrete protection offered against neoplasia and even the ageing process itself. PMID:9739351

  6. Learning with regularizers in multilayer neural networks

    NASA Astrophysics Data System (ADS)

    Saad, David; Rattray, Magnus

    1998-02-01

    We study the effect of regularization in an on-line gradient-descent learning scenario for a general two-layer student network with an arbitrary number of hidden units. Training examples are randomly drawn input vectors labeled by a two-layer teacher network with an arbitrary number of hidden units that may be corrupted by Gaussian output noise. We examine the effect of weight decay regularization on the dynamical evolution of the order parameters and generalization error in various phases of the learning process, in both noiseless and noisy scenarios.

  7. Regular transport dynamics produce chaotic travel times.

    PubMed

    Villalobos, Jorge; Muñoz, Víctor; Rogan, José; Zarama, Roberto; Johnson, Neil F; Toledo, Benjamín; Valdivia, Juan Alejandro

    2014-06-01

    In the hope of making passenger travel times shorter and more reliable, many cities are introducing dedicated bus lanes (e.g., Bogota, London, Miami). Here we show that chaotic travel times are actually a natural consequence of individual bus function, and hence of public transport systems more generally, i.e., chaotic dynamics emerge even when the route is empty and straight, stops and lights are equidistant and regular, and loading times are negligible. More generally, our findings provide a novel example of chaotic dynamics emerging from a single object following Newton's laws of motion in a regularized one-dimensional system. PMID:25019866

  8. Demosaicing as the problem of regularization

    NASA Astrophysics Data System (ADS)

    Kunina, Irina; Volkov, Aleksey; Gladilin, Sergey; Nikolaev, Dmitry

    2015-12-01

    Demosaicing is the process of reconstruction of a full-color image from Bayer mosaic, which is used in digital cameras for image formation. This problem is usually considered as an interpolation problem. In this paper, we propose to consider the demosaicing problem as a problem of solving an underdetermined system of algebraic equations using regularization methods. We consider regularization with standard l1/2-, l1 -, l2- norms and their effect on quality image reconstruction. The experimental results showed that the proposed technique can both be used in existing methods and become the base for new ones

  9. REGULAR VERSUS DIFFUSIVE PHOTOSPHERIC FLUX CANCELLATION

    SciTech Connect

    Litvinenko, Yuri E.

    2011-04-20

    Observations of photospheric flux cancellation on the Sun imply that cancellation can be a diffusive rather than regular process. A criterion is derived, which quantifies the parameter range in which diffusive photospheric cancellation should occur. Numerical estimates show that regular cancellation models should be expected to give a quantitatively accurate description of photospheric cancellation. The estimates rely on a recently suggested scaling for a turbulent magnetic diffusivity, which is consistent with the diffusivity measurements on spatial scales varying by almost two orders of magnitude. Application of the turbulent diffusivity to large-scale dispersal of the photospheric magnetic flux is discussed.

  10. Wavelet-based regularization for robust microwave imaging in medical applications.

    PubMed

    Scapaticci, Rosa; Kosmas, Panagiotis; Crocco, Lorenzo

    2015-04-01

    Microwave imaging (MWI) is an emerging tool for medical diagnostics, potentially offering unique advantages such as the capability of providing quantitative images of the inspected tissues. This involves, however, solving a challenging nonlinear and ill-posed electromagnetic inverse scattering problem. This paper presents a robust method for quantitative MWI in medical applications where very little, if any, a priori information on the imaging scenario is available. This is accomplished by employing a distorted Born iterative method and a regularization by projection technique, which reconstructs the tissue parameters using a wavelet basis expansion to represent the unknown contrast. This approach is suited for any microwave medical imaging application where the requirement for increased resolution dictates the use of higher frequency data and, consequently, a robust regularization strategy. To demonstrate the robustness of the proposed approach, this paper presents reconstructions of highly heterogeneous anatomically realistic numerical breast phantoms in a canonical 2-D configuration. PMID:25532165

  11. 12 CFR 725.3 - Regular membership.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.3 Regular membership. (a) A natural person credit... the credit union's paid-in and unimpaired capital and surplus, as determined in accordance with §...

  12. 12 CFR 725.3 - Regular membership.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.3 Regular membership. (a) A natural person credit... the credit union's paid-in and unimpaired capital and surplus, as determined in accordance with §...

  13. 12 CFR 725.3 - Regular membership.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.3 Regular membership. (a) A natural person credit... the credit union's paid-in and unimpaired capital and surplus, as determined in accordance with §...

  14. 12 CFR 725.3 - Regular membership.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.3 Regular membership. (a) A natural person credit... the credit union's paid-in and unimpaired capital and surplus, as determined in accordance with §...

  15. Commitment and Dependence Upon Regular Running.

    ERIC Educational Resources Information Center

    Sachs, Michael L.; Pargman, David

    The linear relationship between intellectual commitment to running and psychobiological dependence upon running is examined. A sample of 540 regular runners (running frequency greater than three days per week for the past year for the majority) was surveyed with a questionnaire. Measures of commitment and dependence on running, as well as…

  16. RBOOST: RIEMANNIAN DISTANCE BASED REGULARIZED BOOSTING.

    PubMed

    Liu, Meizhu; Vemuri, Baba C

    2011-03-30

    Boosting is a versatile machine learning technique that has numerous applications including but not limited to image processing, computer vision, data mining etc. It is based on the premise that the classification performance of a set of weak learners can be boosted by some weighted combination of them. There have been a number of boosting methods proposed in the literature, such as the AdaBoost, LPBoost, SoftBoost and their variations. However, the learning update strategies used in these methods usually lead to overfitting and instabilities in the classification accuracy. Improved boosting methods via regularization can overcome such difficulties. In this paper, we propose a Riemannian distance regularized LPBoost, dubbed RBoost. RBoost uses Riemannian distance between two square-root densities (in closed form) - used to represent the distribution over the training data and the classification error respectively - to regularize the error distribution in an iterative update formula. Since this distance is in closed form, RBoost requires much less computational cost compared to other regularized Boosting algorithms. We present several experimental results depicting the performance of our algorithm in comparison to recently published methods, LP-Boost and CAVIAR, on a variety of datasets including the publicly available OASIS database, a home grown Epilepsy database and the well known UCI repository. Results depict that the RBoost algorithm performs better than the competing methods in terms of accuracy and efficiency. PMID:21927643

  17. Generalisation of Regular and Irregular Morphological Patterns.

    ERIC Educational Resources Information Center

    Prasada, Sandeep; and Pinker, Steven

    1993-01-01

    When it comes to explaining English verbs' patterns of regular and irregular generalization, single-network theories have difficulty with the former, rule-only theories with the latter process. Linguistic and psycholinguistic evidence, based on observation during experiments and simulations in morphological pattern generation, independently call…

  18. Observing Special and Regular Education Classrooms.

    ERIC Educational Resources Information Center

    Hersh, Susan B.

    The paper describes an observation instrument originally developed as a research tool to assess both the special setting and the regular classroom. The instrument can also be used in determining appropriate placement for students with learning disabilities and for programming the transfer of skills learned in the special setting to the regular…

  19. Starting flow in regular polygonal ducts

    NASA Astrophysics Data System (ADS)

    Wang, C. Y.

    2016-06-01

    The starting flows in regular polygonal ducts of S = 3, 4, 5, 6, 8 sides are determined by the method of eigenfunction superposition. The necessary S-fold symmetric eigenfunctions and eigenvalues of the Helmholtz equation are found either exactly or by boundary point match. The results show the starting time is governed by the first eigenvalue.

  20. 28 CFR 540.44 - Regular visitors.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PERSONS IN THE COMMUNITY Visiting Regulations § 540.44 Regular visitors. An inmate desiring to have... ordinarily will be extended to friends and associates having an established relationship with the inmate... of the institution. Exceptions to the prior relationship rule may be made, particularly for...

  1. Regular Classroom Teachers' Perceptions of Mainstreaming Effects.

    ERIC Educational Resources Information Center

    Ringlaben, Ravic P.; Price, Jay R.

    To assess regular classroom teachers' perceptions of mainstreaming, a 22 item questionnaire was completed by 117 teachers (K through 12). Among results were that nearly half of the Ss indicated a lack of preparation for implementing mainstreaming; 47% tended to be very willing to accept aminstreamed students; 42% said mainstreaming was working…

  2. Regularizing cosmological singularities by varying physical constants

    SciTech Connect

    Dąbrowski, Mariusz P.; Marosek, Konrad E-mail: k.marosek@wmf.univ.szczecin.pl

    2013-02-01

    Varying physical constant cosmologies were claimed to solve standard cosmological problems such as the horizon, the flatness and the Λ-problem. In this paper, we suggest yet another possible application of these theories: solving the singularity problem. By specifying some examples we show that various cosmological singularities may be regularized provided the physical constants evolve in time in an appropriate way.

  3. Exploring the structural regularities in networks

    NASA Astrophysics Data System (ADS)

    Shen, Hua-Wei; Cheng, Xue-Qi; Guo, Jia-Feng

    2011-11-01

    In this paper, we consider the problem of exploring structural regularities of networks by dividing the nodes of a network into groups such that the members of each group have similar patterns of connections to other groups. Specifically, we propose a general statistical model to describe network structure. In this model, a group is viewed as a hidden or unobserved quantity and it is learned by fitting the observed network data using the expectation-maximization algorithm. Compared with existing models, the most prominent strength of our model is the high flexibility. This strength enables it to possess the advantages of existing models and to overcome their shortcomings in a unified way. As a result, not only can broad types of structure be detected without prior knowledge of the type of intrinsic regularities existing in the target network, but also the type of identified structure can be directly learned from the network. Moreover, by differentiating outgoing edges from incoming edges, our model can detect several types of structural regularities beyond competing models. Tests on a number of real world and artificial networks demonstrate that our model outperforms the state-of-the-art model in shedding light on the structural regularities of networks, including the overlapping community structure, multipartite structure, and several other types of structure, which are beyond the capability of existing models.

  4. Dyslexia in Regular Orthographies: Manifestation and Causation

    ERIC Educational Resources Information Center

    Wimmer, Heinz; Schurz, Matthias

    2010-01-01

    This article summarizes our research on the manifestation of dyslexia in German and on cognitive deficits, which may account for the severe reading speed deficit and the poor orthographic spelling performance that characterize dyslexia in regular orthographies. An only limited causal role of phonological deficits (phonological awareness,…

  5. Regularities in Spearman's Law of Diminishing Returns.

    ERIC Educational Resources Information Center

    Jensen, Arthur R.

    2003-01-01

    Examined the assumption that Spearman's law acts unsystematically and approximately uniformly for various subtests of cognitive ability in an IQ test battery when high- and low-ability IQ groups are selected. Data from national standardization samples for Wechsler adult and child IQ tests affirm regularities in Spearman's "Law of Diminishing…

  6. Fast Image Reconstruction with L2-Regularization

    PubMed Central

    Bilgic, Berkin; Chatnuntawech, Itthi; Fan, Audrey P.; Setsompop, Kawin; Cauley, Stephen F.; Wald, Lawrence L.; Adalsteinsson, Elfar

    2014-01-01

    Purpose We introduce L2-regularized reconstruction algorithms with closed-form solutions that achieve dramatic computational speed-up relative to state of the art L1- and L2-based iterative algorithms while maintaining similar image quality for various applications in MRI reconstruction. Materials and Methods We compare fast L2-based methods to state of the art algorithms employing iterative L1- and L2-regularization in numerical phantom and in vivo data in three applications; 1) Fast Quantitative Susceptibility Mapping (QSD), 2) Lipid artifact suppression in Magnetic Resonance Spectroscopic Imaging (MRSI), and 3) Diffusion Spectrum Imaging (DSI). In all cases, proposed L2-based methods are compared with the state of the art algorithms, and two to three orders of magnitude speed up is demonstrated with similar reconstruction quality. Results The closed-form solution developed for regularized QSM allows processing of a 3D volume under 5 seconds, the proposed lipid suppression algorithm takes under 1 second to reconstruct single-slice MRSI data, while the PCA based DSI algorithm estimates diffusion propagators from undersampled q-space for a single slice under 30 seconds, all running in Matlab using a standard workstation. Conclusion For the applications considered herein, closed-form L2-regularization can be a faster alternative to its iterative counterpart or L1-based iterative algorithms, without compromising image quality. PMID:24395184

  7. Handicapped Children in the Regular Classroom.

    ERIC Educational Resources Information Center

    Fountain Valley School District, CA.

    Reported was a project in which 60 educable mentally retarded (EMR) and 30 educationally handicapped (EH) elementary school students were placed in regular classrooms to determine whether they could be effectively educated in those settings. Effective education was defined in terms of improvement in reading, mathematics, student and teacher…

  8. Oregon Schools Begin Inspection, Cleanup.

    ERIC Educational Resources Information Center

    Buckley, James F.

    1987-01-01

    Discusses the need for environmental health inspections in schools. Reports on the results of a survey of Clackamas County (Oregon) school kitchens, in relation to a high incidence of hepatitis A. Describes the variety of violations found and urges that schools no longer be exempt from state health division regulations. (TW)

  9. Robotic Welding and Inspection System

    SciTech Connect

    H. B. Smartt; D. P. Pace; E. D. Larsen; T. R. McJunkin; C. I. Nichol; D. E. Clark; K. L. Skinner; M. L. Clark; T. G. Kaser; C. R. Tolle

    2008-06-01

    This paper presents a robotic system for GTA welding of lids on cylindrical vessels. The system consists of an articulated robot arm, a rotating positioner, end effectors for welding, grinding, ultrasonic and eddy current inspection. Features include weld viewing cameras, modular software, and text-based procedural files for process and motion trajectories.

  10. Electrical submersible pump teardown inspection

    SciTech Connect

    Lea, J.F.; Powers, W.J.

    1984-05-01

    This article deals with the details of an electrical submersible pump motor inspection. The ESP motor is shown in the disassembly fixture (vise). What to look for is discussed, such as the condition of the motor housing; if there is any heavy or light scale which could have added to motor heating and possible buildup; corrosion and any dents, scratches or bending.

  11. Artificial Intelligence Assists Ultrasonic Inspection

    NASA Technical Reports Server (NTRS)

    Schaefer, Lloyd A.; Willenberg, James D.

    1992-01-01

    Subtle indications of flaws extracted from ultrasonic waveforms. Ultrasonic-inspection system uses artificial intelligence to help in identification of hidden flaws in electron-beam-welded castings. System involves application of flaw-classification logic to analysis of ultrasonic waveforms.

  12. Learning regular expressions for clinical text classification

    PubMed Central

    Bui, Duy Duc An; Zeng-Treitler, Qing

    2014-01-01

    Objectives Natural language processing (NLP) applications typically use regular expressions that have been developed manually by human experts. Our goal is to automate both the creation and utilization of regular expressions in text classification. Methods We designed a novel regular expression discovery (RED) algorithm and implemented two text classifiers based on RED. The RED+ALIGN classifier combines RED with an alignment algorithm, and RED+SVM combines RED with a support vector machine (SVM) classifier. Two clinical datasets were used for testing and evaluation: the SMOKE dataset, containing 1091 text snippets describing smoking status; and the PAIN dataset, containing 702 snippets describing pain status. We performed 10-fold cross-validation to calculate accuracy, precision, recall, and F-measure metrics. In the evaluation, an SVM classifier was trained as the control. Results The two RED classifiers achieved 80.9–83.0% in overall accuracy on the two datasets, which is 1.3–3% higher than SVM's accuracy (p<0.001). Similarly, small but consistent improvements have been observed in precision, recall, and F-measure when RED classifiers are compared with SVM alone. More significantly, RED+ALIGN correctly classified many instances that were misclassified by the SVM classifier (8.1–10.3% of the total instances and 43.8–53.0% of SVM's misclassifications). Conclusions Machine-generated regular expressions can be effectively used in clinical text classification. The regular expression-based classifier can be combined with other classifiers, like SVM, to improve classification performance. PMID:24578357

  13. Novel Silicon Carbide Detector for Active Inspections

    SciTech Connect

    F. H. Ruddy; J.G. Seidel; R.W. Flammang

    2007-03-01

    The need to address increasingly challenging inspection requirements (such as large volume objects, very fast inspection throughputs, potentially significant shielding, etc.) for such items as nuclear materials and explosives will require the use of active interrogation technologies. While these active technologies can successfully address these challenges by inducing unique, temporal signatures, the inspection environment will also induce overall “background signals” that can be orders of magnitude larger than the induced signatures. Detectors that can successfully operate in these types of customized, inspection environments (pulsed and continuous) and successfully extract induced signature data are clearly needed and will effectively define the limitations of any active inspection system. A novel silicon carbide detector is now being investigated to successfully address both neutron- and photon/bremsstrahlung-type inspection applications. While this paper describes this detector and highlights efforts related to neutron inspection, it will focus on its neutron and gamma-ray/photon detection performance in neutron- and bremssstrahlung-type inspection applications.

  14. 49 CFR 213.367 - Special inspections.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Special inspections. In the event of fire, flood, severe storm, temperature extremes or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved...

  15. 49 CFR 213.367 - Special inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Special inspections. In the event of fire, flood, severe storm, temperature extremes or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved...

  16. 49 CFR 213.367 - Special inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Special inspections. In the event of fire, flood, severe storm, temperature extremes or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved...

  17. 49 CFR 213.367 - Special inspections.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Special inspections. In the event of fire, flood, severe storm, temperature extremes or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved...

  18. 49 CFR 213.367 - Special inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Special inspections. In the event of fire, flood, severe storm, temperature extremes or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved...

  19. Piping inspection carriage having axially displaceable sensor

    DOEpatents

    Zollinger, William T.; Treanor, Richard C.

    1994-01-01

    A pipe inspection instrument carriage for use with a pipe crawler for performing internal inspections of piping surfaces. The carriage has a front leg assembly, a rear leg assembly and a central support connecting the two assemblies and for mounting an instrument arm having inspection instruments. The instrument arm has a y-arm mounted distally thereon for axially aligning the inspection instrumentation and a mounting block, a linear actuator and axial movement arm for extending the inspection instruments radially outward to operably position the inspection instruments on the piping interior. Also, the carriage has a rotation motor and gear assembly for rotating the central support and the front leg assembly with respect to the rear leg assembly so that the inspection instruments azimuthally scan the piping interior. The instrument carriage allows performance of all piping inspection operations with a minimum of moving parts, thus decreasing the likelihood of performance failure.

  20. Piping inspection carriage having axially displaceable sensor

    DOEpatents

    Zollinger, W.T.; Treanor, R.C.

    1994-12-06

    A pipe inspection instrument carriage is described for use with a pipe crawler for performing internal inspections of piping surfaces. The carriage has a front leg assembly, a rear leg assembly and a central support connecting the two assemblies and for mounting an instrument arm having inspection instruments. The instrument arm has a Y-arm mounted distally thereon for axially aligning the inspection instrumentation and a mounting block, a linear actuator and axial movement arm for extending the inspection instruments radially outward to operably position the inspection instruments on the piping interior. Also, the carriage has a rotation motor and gear assembly for rotating the central support and the front leg assembly with respect to the rear leg assembly so that the inspection instruments azimuthally scan the piping interior. The instrument carriage allows performance of all piping inspection operations with a minimum of moving parts, thus decreasing the likelihood of performance failure. 4 figures.

  1. Tecnology Development for Robotic Surface Inspection

    NASA Technical Reports Server (NTRS)

    Volpe, Richard; Balaram, J. Bob

    1994-01-01

    For the past three years at JPL, NASA has been sponsoring the Remote Surface Inspection Project to develop the technology needed for doing periodic and on-demand inspection of space borne platforms, in particular Space Station Freedom.

  2. 46 CFR 160.042-4 - Inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-4 Inspection. (a) Life raft skids covered by this subpart are not subject to inspection at the place of manufacture,...

  3. 46 CFR 160.042-4 - Inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-4 Inspection. (a) Life raft skids covered by this subpart are not subject to inspection at the place of manufacture,...

  4. 46 CFR 160.042-4 - Inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-4 Inspection. (a) Life raft skids covered by this subpart are not subject to inspection at the place of manufacture,...

  5. 46 CFR 160.042-4 - Inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-4 Inspection. (a) Life raft skids covered by this subpart are not subject to inspection at the place of manufacture,...

  6. 46 CFR 160.042-4 - Inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-4 Inspection. (a) Life raft skids covered by this subpart are not subject to inspection at the place of manufacture,...

  7. 7 CFR 75.38 - Lot inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) REGULATIONS FOR...

  8. Maximum-likelihood constrained regularized algorithms: an objective criterion for the determination of regularization parameters

    NASA Astrophysics Data System (ADS)

    Lanteri, Henri; Roche, Muriel; Cuevas, Olga; Aime, Claude

    1999-12-01

    We propose regularized versions of Maximum Likelihood algorithms for Poisson process with non-negativity constraint. For such process, the best-known (non- regularized) algorithm is that of Richardson-Lucy, extensively used for astronomical applications. Regularization is necessary to prevent an amplification of the noise during the iterative reconstruction; this can be done either by limiting the iteration number or by introducing a penalty term. In this Communication, we focus our attention on the explicit regularization using Tikhonov (Identity and Laplacian operator) or entropy terms (Kullback-Leibler and Csiszar divergences). The algorithms are established from the Kuhn-Tucker first order optimality conditions for the minimization of the Lagrange function and from the method of successive substitutions. The algorithms may be written in a `product form'. Numerical illustrations are given for simulated images corrupted by photon noise. The effects of the regularization are shown in the Fourier plane. The tests we have made indicate that a noticeable improvement of the results may be obtained for some of these explicitly regularized algorithms. We also show that a comparison with a Wiener filter can give the optimal regularizing conditions (operator and strength).

  9. A highly redundant robot system for inspection

    NASA Technical Reports Server (NTRS)

    Lee, Thomas S.; Ohms, Tim; Hayati, Samad

    1994-01-01

    The work on the serpentine inspection system at JPL is described. The configuration of the inspection system consists of 20 degrees of freedom in total. In particular, the design and development of the serpentine micromanipulator end-effector tool which has 12 degrees of freedom is described. The inspection system is used for application in JPL's Remote Surface Inspection project and as a research tool in redundant manipulator control.

  10. Generator acceptance test and inspection report

    SciTech Connect

    Johns, B.R.

    1997-07-24

    This Acceptance Test Report(ATR) is the completed testing and inspection of the new portable generator. The testing and inspection is to verify that the generator provided by the vendor meets the requirements of specification WHC-S-0252, Revision 2. Attached is various other documentation to support the inspection and testing.

  11. 49 CFR 213.239 - Special inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Inspection § 213.239 Special inspections. In the event of fire, flood, severe storm, or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved as soon as possible after the occurrence and, if...

  12. 49 CFR 213.239 - Special inspections.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Inspection § 213.239 Special inspections. In the event of fire, flood, severe storm, or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved as soon as possible after the occurrence and, if...

  13. 49 CFR 213.239 - Special inspections.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Inspection § 213.239 Special inspections. In the event of fire, flood, severe storm, or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved as soon as possible after the occurrence and, if...

  14. 49 CFR 213.239 - Special inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Inspection § 213.239 Special inspections. In the event of fire, flood, severe storm, or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved as soon as possible after the occurrence and, if...

  15. 49 CFR 213.239 - Special inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Inspection § 213.239 Special inspections. In the event of fire, flood, severe storm, or other occurrence which might have damaged track structure, a special inspection shall be made of the track involved as soon as possible after the occurrence and, if...

  16. 10 CFR 1016.43 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Inspections. 1016.43 Section 1016.43 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) SAFEGUARDING OF RESTRICTED DATA Control of Information § 1016.43 Inspections. The DOE shall make such inspections and surveys of the premises, activities, records, and...

  17. 10 CFR 50.70 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Inspections. 50.70 Section 50.70 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND UTILIZATION FACILITIES Inspections, Records, Reports, Notifications § 50.70 Inspections. (a) Each applicant for or holder of a license, including a...

  18. 9 CFR 93.323 - Inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... with facilities necessary for proper chute inspection, dipping, and testing, as provided in this part. ... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Inspection. 93.323 Section 93.323 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF...

  19. 9 CFR 93.323 - Inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... with facilities necessary for proper chute inspection, dipping, and testing, as provided in this part. ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Inspection. 93.323 Section 93.323 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF...

  20. 9 CFR 93.323 - Inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... with facilities necessary for proper chute inspection, dipping, and testing, as provided in this part. ... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Inspection. 93.323 Section 93.323 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF...

  1. 42 CFR 73.18 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Inspections. 73.18 Section 73.18 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES QUARANTINE, INSPECTION, LICENSING SELECT AGENTS AND TOXINS § 73.18 Inspections. (a) Without prior notification, the HHS Secretary, shall...

  2. 7 CFR 996.12 - Outgoing inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.12 Outgoing inspection. Outgoing inspection means the sampling, inspection, and certification of either: shelled peanuts... peanuts which have been cleaned, sorted, and otherwise prepared for inshell human consumption markets....

  3. 7 CFR 996.12 - Outgoing inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.12 Outgoing inspection. Outgoing inspection means the sampling, inspection, and certification of either: shelled peanuts... peanuts which have been cleaned, sorted, and otherwise prepared for inshell human consumption markets....

  4. 7 CFR 996.12 - Outgoing inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.12 Outgoing inspection. Outgoing inspection means the sampling, inspection, and certification of either: shelled peanuts... peanuts which have been cleaned, sorted, and otherwise prepared for inshell human consumption markets....

  5. 7 CFR 996.12 - Outgoing inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.12 Outgoing inspection. Outgoing inspection means the sampling, inspection, and certification of either: shelled peanuts... peanuts which have been cleaned, sorted, and otherwise prepared for inshell human consumption markets....

  6. 7 CFR 996.12 - Outgoing inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.12 Outgoing inspection. Outgoing inspection means the sampling, inspection, and certification of either: shelled peanuts... peanuts which have been cleaned, sorted, and otherwise prepared for inshell human consumption markets....

  7. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a) Each bridge management program shall prescribe a procedure for protection of train operations and for inspection of any bridge that might have been damaged by a natural or accidental event, including but...

  8. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Special inspections. 237.105 Section 237.105 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a) Each bridge management program...

  9. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Special inspections. 237.105 Section 237.105 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a) Each bridge management program...

  10. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a) Each bridge management program shall prescribe a procedure for protection of train operations and for inspection of any bridge that might have been damaged by a natural or accidental event, including but...

  11. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a) Each bridge management program shall prescribe a procedure for protection of train operations and for inspection of any bridge that might have been damaged by a natural or accidental event, including but...

  12. 38 CFR 61.65 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Inspections. 61.65 Section 61.65 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.65 Inspections. VA may inspect the facility and...

  13. 9 CFR 354.10 - Inspection service.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Inspection service. 354.10 Section 354.10 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY... CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Basis of Service § 354.10...

  14. 40 CFR 264.574 - Inspections.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Inspections. (a) During construction or installation, liners and cover systems (e.g., membranes, sheets, or... foreign materials). Immediately after construction or installation, liners must be inspected and certified..., liners and covers must be inspected to ensure tight seams and joints and the absence of tears,...

  15. 40 CFR 264.574 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Inspections. (a) During construction or installation, liners and cover systems (e.g., membranes, sheets, or... foreign materials). Immediately after construction or installation, liners must be inspected and certified..., liners and covers must be inspected to ensure tight seams and joints and the absence of tears,...

  16. 40 CFR 264.574 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Inspections. (a) During construction or installation, liners and cover systems (e.g., membranes, sheets, or... foreign materials). Immediately after construction or installation, liners must be inspected and certified..., liners and covers must be inspected to ensure tight seams and joints and the absence of tears,...

  17. 40 CFR 264.574 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Inspections. (a) During construction or installation, liners and cover systems (e.g., membranes, sheets, or... foreign materials). Immediately after construction or installation, liners must be inspected and certified..., liners and covers must be inspected to ensure tight seams and joints and the absence of tears,...

  18. 40 CFR 264.574 - Inspections.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Inspections. (a) During construction or installation, liners and cover systems (e.g., membranes, sheets, or... foreign materials). Immediately after construction or installation, liners must be inspected and certified..., liners and covers must be inspected to ensure tight seams and joints and the absence of tears,...

  19. 10 CFR 74.81 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Inspections. 74.81 Section 74.81 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) MATERIAL CONTROL AND ACCOUNTING OF SPECIAL NUCLEAR MATERIAL Enforcement § 74.81 Inspections. (a) Each licensee shall afford to the Commission at all reasonable times opportunity to inspect special nuclear material and...

  20. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., inspections may be ad hoc, routine, special, or a complementary access (or a combination of the foregoing). The objectives of the IAEA inspectors in the performance of inspections are as follows: (1) Ad hoc... Agreement may be present; (2) Ad hoc inspections to identify and, if possible, verify the quantity...

  1. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., inspections may be ad hoc, routine, special, or a complementary access (or a combination of the foregoing). The objectives of the IAEA inspectors in the performance of inspections are as follows: (1) Ad hoc... Agreement may be present; (2) Ad hoc inspections to identify and, if possible, verify the quantity...

  2. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., inspections may be ad hoc, routine, special, or a complementary access (or a combination of the foregoing). The objectives of the IAEA inspectors in the performance of inspections are as follows: (1) Ad hoc... Agreement may be present; (2) Ad hoc inspections to identify and, if possible, verify the quantity...

  3. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., inspections may be ad hoc, routine, special, or a complementary access (or a combination of the foregoing). The objectives of the IAEA inspectors in the performance of inspections are as follows: (1) Ad hoc... Agreement may be present; (2) Ad hoc inspections to identify and, if possible, verify the quantity...

  4. Automated Inspection And Precise Grinding Of Gears

    NASA Technical Reports Server (NTRS)

    Frint, Harold; Glasow, Warren

    1995-01-01

    Method of precise grinding of spiral bevel gears involves automated inspection of gear-tooth surfaces followed by adjustments of machine-tool settings to minimize differences between actual and nominal surfaces. Similar to method described in "Computerized Inspection of Gear-Tooth Surfaces" (LEW-15736). Yields gears of higher quality, with significant reduction in manufacturing and inspection time.

  5. 28 CFR 10.10 - Public inspection.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 1 2011-07-01 2011-07-01 false Public inspection. 10.10 Section 10.10... WITHIN THE UNITED STATES Inspection of Registration Statement § 10.10 Public inspection. Registration statements filed with the Attorney General pursuant to the said act shall be available for public...

  6. 28 CFR 10.10 - Public inspection.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 28 Judicial Administration 1 2012-07-01 2012-07-01 false Public inspection. 10.10 Section 10.10... WITHIN THE UNITED STATES Inspection of Registration Statement § 10.10 Public inspection. Registration statements filed with the Attorney General pursuant to the said act shall be available for public...

  7. 7 CFR 800.87 - New inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 7 2011-01-01 2011-01-01 false New inspections. 800.87 Section 800.87 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS...

  8. 7 CFR 800.87 - New inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false New inspections. 800.87 Section 800.87 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS...

  9. Automatic inspection system for printed circuit boards.

    PubMed

    Hara, Y; Akiyama, N; Karasaki, K

    1983-06-01

    The purpose of this correspondence is to present problems and methods in automating visual inspection of printed circuit boards (PCB's). Vertical and diagonal illumination are useful in detecting PCB patterns correctly. An algorithm comparing local features of the patterns to be inspected with those of the pattern to be referenced is proposed. An inspection system using developed technologies is also described. PMID:21869150

  10. 46 CFR 169.225 - Annual inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Annual inspection. 169.225 Section 169.225 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Reinspection § 169.225 Annual inspection. (a) Your vessel must undergo an...

  11. 46 CFR 169.225 - Annual inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Annual inspection. 169.225 Section 169.225 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Reinspection § 169.225 Annual inspection. (a) Your vessel must undergo an...

  12. 46 CFR 169.226 - Periodic inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Periodic inspection. 169.226 Section 169.226 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Reinspection § 169.226 Periodic inspection. (a) Your vessel must undergo...

  13. 46 CFR 169.226 - Periodic inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Periodic inspection. 169.226 Section 169.226 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Reinspection § 169.226 Periodic inspection. (a) Your vessel must undergo...

  14. 46 CFR 169.226 - Periodic inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Periodic inspection. 169.226 Section 169.226 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Reinspection § 169.226 Periodic inspection. (a) Your vessel must undergo...

  15. 46 CFR 169.226 - Periodic inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Periodic inspection. 169.226 Section 169.226 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Reinspection § 169.226 Periodic inspection. (a) Your vessel must undergo...

  16. 46 CFR 169.225 - Annual inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Annual inspection. 169.225 Section 169.225 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Reinspection § 169.225 Annual inspection. (a) Your vessel must undergo an...

  17. 46 CFR 169.226 - Periodic inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Periodic inspection. 169.226 Section 169.226 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Reinspection § 169.226 Periodic inspection. (a) Your vessel must undergo...

  18. 46 CFR 169.225 - Annual inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Annual inspection. 169.225 Section 169.225 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Reinspection § 169.225 Annual inspection. (a) Your vessel must undergo an...

  19. 46 CFR 169.225 - Annual inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Annual inspection. 169.225 Section 169.225 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Reinspection § 169.225 Annual inspection. (a) Your vessel must undergo an...

  20. 10 CFR 71.121 - Internal inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Internal inspection. 71.121 Section 71.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Quality Assurance § 71.121 Internal inspection. The licensee, certificate holder, and applicant for a CoC shall establish and execute a program for inspection...