Science.gov

Sample records for 9ci polyoxyethylene glycol

  1. 21 CFR 573.820 - Polyoxyethylene glycol (400) mono- and dioleates.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.820 Polyoxyethylene glycol (400) mono- and dioleates. The food additive polyoxyethylene glycol (400) mono- and dioleates may be safely used as an...

  2. 21 CFR 573.820 - Polyoxyethylene glycol (400) mono- and dioleates.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.820 Polyoxyethylene glycol (400) mono- and dioleates. The food additive polyoxyethylene glycol (400) mono- and dioleates may be safely used as an...

  3. 21 CFR 573.820 - Polyoxyethylene glycol (400) mono- and dioleates.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.820 Polyoxyethylene glycol (400) mono- and dioleates. The food additive polyoxyethylene glycol (400) mono- and dioleates may be safely used as an...

  4. Interactions of water with the nonionic surfactant polyoxyethylene glycol alkyl ethers studied by phase-sensitive sum frequency generation and molecular dynamics simulation

    NASA Astrophysics Data System (ADS)

    Mafi, Amirhossein; Hu, Dan; Chou, Keng C.

    2016-06-01

    Phase-sensitive sum frequency generation (SFG) vibrational spectroscopy and molecular dynamics (MD) simulation were used to study the interactions between water molecules and the surfactant polyoxyethylene glycol alkyl ether (C12E4) at its critical micelle concentration. The surfactant enhanced the positive peak of water's SFG spectrum suggesting that C12E4 was more anionic-like, even though the surfactant was overall neutral. MD simulations showed that the surfactant increased the depth of the surface anisotropic layer from 0.31 to 1.82 nm and the average number of hydrogen bonds per water molecule from 2.7 to 3.1. For water molecules near the surfactant, their H and O atoms are confined in well-separated shells. Both the O and C atoms in the head group of the surfactant are surrounded by the H atoms, instead of the O atoms, of water indicating that the negatively charged O atoms of the surfactant play a more important role than the C atoms in determining the orientation of water. The simulation also showed that the orientation of surface water molecules was flipped in the presence of the surfactant, which was consistent with the observed SFG spectra.

  5. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  6. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  7. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  8. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  9. 40 CFR 721.6045 - Phosphinothioic acid, bis(2,4,4-trimethylpentyl)- (9CI).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Phosphinothioic acid, bis(2,4,4-trimethylpentyl)- (9CI). 721.6045 Section 721.6045 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances...

  10. 40 CFR 721.6045 - Phosphinothioic acid, bis(2,4,4-trimethylpentyl)- (9CI).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Phosphinothioic acid, bis(2,4,4-trimethylpentyl)- (9CI). 721.6045 Section 721.6045 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances...

  11. 40 CFR 721.9840 - Tungstate (W12(OH)2O386-) hexasodium (9CI).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Tungstate (W12(OH)2O386-) hexasodium... Specific Chemical Substances § 721.9840 Tungstate (W12(OH)2O386-) hexasodium (9CI). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as tungstate...

  12. 40 CFR 721.9840 - Tungstate (W12(OH)2O386-) hexasodium (9CI).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Tungstate (W12(OH)2O386-) hexasodium... Specific Chemical Substances § 721.9840 Tungstate (W12(OH)2O386-) hexasodium (9CI). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as tungstate...

  13. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Polyoxyethylene (23) lauryl ether blocks. 520.1846 Section 520.1846 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.1846 Polyoxyethylene (23) lauryl ether blocks....

  14. 40 CFR 721.3800 - Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. 721.3800 Section 721.3800... Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. (a... generically as formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol,...

  15. 40 CFR 721.3800 - Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. 721.3800 Section 721.3800... Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. (a... generically as formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol,...

  16. 40 CFR 721.3800 - Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. 721.3800 Section 721.3800... Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. (a... generically as formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol,...

  17. 40 CFR 721.3800 - Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. 721.3800 Section 721.3800... Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. (a... generically as formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol,...

  18. 40 CFR 721.3800 - Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. 721.3800 Section 721.3800... Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. (a... generically as formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol,...

  19. Residual Patterns of Alkyl Polyoxyethylene Surfactant Droplets after Water Evaporation

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Using a nonionic, alkyl polyoxyethylene surfactant (X-77®) in aqueous solutions, sessile droplet spreading, pinning, evaporation, contraction, and post-evaporation deposits are characterized. X-77® is widely used in the agricultural field as a spreader/adherent, intended to optimize pathenogenic ag...

  20. Roll-on perfume compositions containing polyoxybutylene-polyoxyethylene copolymers

    SciTech Connect

    Schmolka, I.R.

    1987-05-26

    This patent describes a liquid roll-on composition containing, in weight percent based upon the total composition weight, from 5 percent to 15 percent of a perfume oil, from 25 percent to 40 percent of a volatile alcohol, from 10 percent to 60 percent water, and from 10 percent to 30 percent of a nonionic polyether surfactant. The improvement comprises employing as the nonionic polyether surfactant a cogeneric polyoxybutylene-polyoxyethylene block copolymer.

  1. Ethylene glycol

    Integrated Risk Information System (IRIS)

    Ethylene glycol ; CASRN 107 - 21 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic E

  2. Propylene glycol

    Integrated Risk Information System (IRIS)

    Propylene glycol ; CASRN 57 - 55 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic E

  3. Polyethylene Glycol 3350

    MedlinePlus

    Polyethylene glycol 3350 is used to treat occasional constipation. Polyethylene glycol 3350 is in a class of medications ... Polyethylene glycol 3350 comes as a powder to be mixed with a liquid and taken by mouth. ...

  4. Novel designed polyoxyethylene nonionic surfactant with improved safety and efficiency for anticancer drug delivery

    PubMed Central

    Li, Chang; Sun, Chunmeng; Li, Shasha; Han, Peng; Sun, Huimin; Ouahab, Ammar; Shen, Yan; Xu, Yourui; Xiong, Yerong; Tu, Jiasheng

    2014-01-01

    In order to limit the adverse reactions caused by polysorbate 80 in Taxotere®, a widely used formulation of docetaxel, a safe and effective nanocarrier for this drug has been developed based on micelles formed by a new class of well-defined polyoxyethylene sorbitol oleate (PSO) with sorbitol as the matrix in aqueous solution. The physicochemical properties of the amphiphilic surfactant and the resulting micelles can be easily fine-tuned by the homogeneous sorbitol matrix and pure oleic acid. Composition, critical micelle concentration, and entrapment efficiency were investigated by ultraviolet visible spectroscopy, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, fluorospectrophotometry, and high-performance liquid chromatography. In vitro and in vivo evaluation revealed that PSO had exceptionally low hemolysis and histamine release rates compared with commercial polysorbate 80. Moreover, the tumor targeting delivery of PSO was investigated by in vivo imaging in S180 tumor-bearing mice. The results suggest that this novel delivery system, PSO, provides an acceptable alternative to polysorbate 80 for delivery of docetaxel. Further, due to the hypoallergenic nature of PSO, the mechanism of pseudoallergy caused by the polyoxyethylene nonionic surfactant was investigated. Based on in vitro cell analysis, it was assumed that the initial contact of polyoxyethylene nonionic surfactant with mast cells provoked pseudoallergy via polyamine receptor-mediated endocytosis. PMID:24812509

  5. Novel designed polyoxyethylene nonionic surfactant with improved safety and efficiency for anticancer drug delivery.

    PubMed

    Li, Chang; Sun, Chunmeng; Li, Shasha; Han, Peng; Sun, Huimin; Ouahab, Ammar; Shen, Yan; Xu, Yourui; Xiong, Yerong; Tu, Jiasheng

    2014-01-01

    In order to limit the adverse reactions caused by polysorbate 80 in Taxotere(®), a widely used formulation of docetaxel, a safe and effective nanocarrier for this drug has been developed based on micelles formed by a new class of well-defined polyoxyethylene sorbitol oleate (PSO) with sorbitol as the matrix in aqueous solution. The physicochemical properties of the amphiphilic surfactant and the resulting micelles can be easily fine-tuned by the homogeneous sorbitol matrix and pure oleic acid. Composition, critical micelle concentration, and entrapment efficiency were investigated by ultraviolet visible spectroscopy, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, fluorospectrophotometry, and high-performance liquid chromatography. In vitro and in vivo evaluation revealed that PSO had exceptionally low hemolysis and histamine release rates compared with commercial polysorbate 80. Moreover, the tumor targeting delivery of PSO was investigated by in vivo imaging in S180 tumor-bearing mice. The results suggest that this novel delivery system, PSO, provides an acceptable alternative to polysorbate 80 for delivery of docetaxel. Further, due to the hypoallergenic nature of PSO, the mechanism of pseudoallergy caused by the polyoxyethylene nonionic surfactant was investigated. Based on in vitro cell analysis, it was assumed that the initial contact of polyoxyethylene nonionic surfactant with mast cells provoked pseudoallergy via polyamine receptor-mediated endocytosis. PMID:24812509

  6. Novel Polyoxyethylene-Containing Glycolipids Are Synthesized in Corynebacterium matruchotii and Mycobacterium smegmatis Cultured in the Presence of Tween 80

    PubMed Central

    Wang, Cindy; Mahrous, Engy A.; Lee, Richard E.; Vestling, Martha M.; Takayama, Kuni

    2011-01-01

    The addition of polyoxyethylene sorbitan monooleate (Tween 80) to a culture of mycobacteria greatly influences cell permeability and sensitivity to antibiotics but very little is known regarding the underlying mechanism. Here we show that Corynebacterium matruchotii (surrogate of mycobacteria) converts Tween 80 to a structural series of polyoxyethylenic acids which are then used to form novel series-2A and series-2B glycolipids. Minor series-3 glycolipids were also synthesized. The polyoxyethylenic acids replaced corynomycolic acids in the cell wall. Correspondingly the trehalose dicorynomycolate content was reduced. MALDI mass spectrometry, MS-MS, 1H-NMR, and 13C-NMR were used to characterize the series-2 glycolipids. Series-2A glycolipid is trehalose 6-C36:2-corynomycolate-6′-polyoxyethylenate and series-2B glycolipid is trehalose 6-C36:2-corynomycolate-6′-furan ring-containing polyoxyethylenate. Mycobacterium smegmatis grown in the presence of Tween 80 also synthesizes series-2 type glycolipids. The synthesis of these novel glycolipids in corynebacteria and mycobacteria should result in gross changes in the cell wall permeability and drug sensitivity. PMID:21490808

  7. Evaluation the thermodynamic behavior of nonionic polyoxyethylene surfactants against temperature changes.

    PubMed

    Moghaddam, Hadi Mahmoudi; Dehghannoudeh, Gholamreza; Basir, Mohammad Zaman

    2016-03-01

    Micellization is the most important property of surface agents. It plays an important role in the manufacture of pharmaceutical products. The surfactants have many applications in industry, agriculture, mining and oil recovery with functional properties as wetting, foaming and emulsifier in pharmaceutical and cosmetic products. The micellization parameters of surfactants help the manufacture of pharmaceutical products to be appropriate and stable. Therefore, in this study, Polyoxyethylene lauryl ether (C12E23), Polyoxyethylene (10) cetyl ether (C16E10) and Polyoxyethylene (20) cetyl ether (C16E20) were chosen as the nonionic surfactants to examine the effect of temperature variation (10-80(°)C) on the Critical Micelle Concentration (CMC). The measurement of surface tension was done by a Du Nöuys ring method. The value of CMC was obtained from the surface tension vs. surfactant concentration curve. Since the temperature was increased, the CMC initially decreased and then increased for each surfactant because the formation of the hydrogen bond is harder in the high temperatures. The surface tension γCMC for all three surfactant solutions decreased monotonically as the temperature increased. δG(°)m, ΔH(°)m and ΔS°m as the thermodynamic parameters of micellization, were also estimated and analyzed. The ΔG(°)m was decreased (10-80(°)C) if the temperature was increased. The entropy and enthalpy correlation of micellization showed a significant linearity. For C12E23, C16E20 and C16 E10, the compensation temperature (Tc) was obtained 309.5, 313.2 and 314.4 K, respectively. The calculated thermodynamic parameters showed that the entropy influenced on the micellization process at lower temperature, but it affected by enthalpy when temperature was increased. PMID:27087077

  8. Polyurethane and polyurea nanoparticles based on polyoxyethylene castor oil derivative surfactant suitable for endovascular applications.

    PubMed

    Morral-Ruíz, Genoveva; Melgar-Lesmes, Pedro; García, María Luísa; Solans, Conxita; García-Celma, María José

    2014-01-30

    The design of new, safe and effective nanotherapeutic systems is an important challenge for the researchers in the nanotechnology area. This study describes the formation of biocompatible polyurethane and polyurea nanoparticles based on polyoxyethylene castor oil derivative surfactant formed from O/W nano-emulsions by polymerization at the droplet interfaces in systems composed by aqueous solution/Kolliphor(®) ELP/medium chain triglyceride suitable for intravenous administration. Initial nano-emulsions incorporating highly hydrophilic materials were prepared by the phase inversion composition (PIC) method. After polymerization, nanoparticles with a small particle diameter (25-55 nm) and low polydispersity index were obtained. Parameters such as concentration of monomer, O/S weight ratio as well as the polymerization temperature were crucial to achieve a correct formation of these nanoparticles. Moreover, FT-IR studies showed the full conversion of the monomer to polyurethane and polyurea polymers. Likewise the involvement of the surfactant in the polymerization process through their nucleophilic groups to form the polymeric matrix was demonstrated. This could mean a first step in the development of biocompatible systems formulated with polyoxyethylene castor oil derivative surfactants. In addition, haemolysis and cell viability assays evidenced the good biocompatibility of KELP polyurethane and polyurea nanoparticles thus indicating the potential of these nanosystems as promising drug carriers. PMID:24275445

  9. Micellization and synergistic interaction of binary surfactant mixtures based on sodium nonylphenol polyoxyethylene ether sulfate.

    PubMed

    Chen, Zhong-Xiu; Deng, Shao-Ping; Li, Xiao-Kui

    2008-02-15

    Mixed micelle formation and synergistic interactions of binary surfactant combinations of sodium nonylphenol polyoxyethylene ether sulfate (NPES) with typical surfactants such as sodium dodecyl sulfate (SDS), Triton X-100 (TX100), cetyl trimethyl ammonium bromide (CTAB), and sodium bis(2-ethylhexyl) sulfosuccinate (AOT) at 25 degrees C in the presence of NaCl have been investigated. The critical micelle concentration of the binary mixtures has been quantitatively estimated by steady-state fluorescence measurements. The micellar characteristics such as composition, activity coefficients, and mutual interaction parameters have been estimated following different theoretical treatments. Investigation on the micellization and synergistic interaction of NPES with four kinds of surfactants showed that the behavior of the binary mixture deviated from the ideal state. The analysis revealed that the interaction parameter values (beta) varied with variation of solvent composition. Besides the strong electrostatic attraction between the oppositely charged surfactant NPES-CTAB mixture, the interaction between NPES and SDS also showed far more deviation from ideal behavior than that of TX100 and AOT. The reason for the synergism is also discussed and the results show that an ionic and a nonionic surfactant character existed concurrently in NPES due to the combination of a sulfate group and polyoxyethylene as a hydrophilic moiety. Zeta potential and diffusion coefficient measurements of micelles confirmed the synergistic interaction between the binary surfactants. PMID:18005979

  10. Surface active properties of polyoxyethylene macromonomers and their role in radical polymerization in disperse systems.

    PubMed

    Capek, I

    2000-12-26

    Conventional dispersion polymerization and copolymerization of low-molecular weight (conventional) unsaturated monomers allows preparation of monodisperse and micronsize polymer particles. A similar behavior can be found in the surfactant-free dispersion polymerization of non-traditional vinyl monomers, unsaturated macromonomers. The latter systems allow preparation of random, comb-like, star-like and graft copolymers as well. An interesting alternative arises with the use of amphiphilic reactive macromonomers that contain a polymerizable group and aggregate into an organized structure -- a micelle. Under such conditions the high rate of polymerization and ultrafine (microparticles) polymer dispersions are generated. Thus, the surface-active macromonomers promote the formation of micelles and polymer growth within the main reaction loci -- polymer particles. Furthermore, the surface-active compounds can be formed during the copolymerization of hydrophilic macromonomer and hydrophobic low-molecular weight comonomer. The reactive surface-active oligomeric radicals are incorporated into the polymer matrix or the particle surface layer, which prevents them from subsequent migration. Besides, the covalently bound surface-active groups at the particle surface strongly increase the colloidal stability of final polymer dispersion. This article presents a review of the current literature in the field of the surfactant-free dispersion polymerization of the polyoxyethylene unsaturated macromonomers. Besides a short introduction into some kinetic aspects of radical polymerization of traditional monomers in homogeneous and disperse systems, we mainly focus on the organized aggregation of amphiphilic polyoxyethylene macromonomers, the characterization of amphiphilic graft copolymers and their aggregation properties, and radical copolymerization of polyoxyethylene macromonomers. We discuss the birth and growth of chains, the transfer of reaction loci from the continuous phase to

  11. Toxicity of ethylene glycol, diethylene glycol, and propylene glycol to human cells in culture

    SciTech Connect

    Mochida, K.; Gomyoda, M.

    1987-01-01

    Tissue culture toxicity of various alcohols has been reported by Dillingham who used mouse L cells and Koerker who used mouse neuroblastoma cells. The toxicity of various polyhydric alcohols (ethylene glycol, diethylene glycol and propylene glycol) has apparently not been determined, under conditions of culture. The authors report the toxicity of ethylene glycol, diethylene glycol and propylene glycol and KB cells and the results are compared with previous data obtained using their cell culture system.

  12. Synthesis and spectral properties of novel fluorescent poly(oxyethylene phosphate) tris(beta-diketonate) europium (III) complexes.

    PubMed

    Stanimirov, S; Vasilev, A; Haupt, E; Petkov, I; Deligeorgiev, T

    2009-01-01

    Novel poly(oxyethylene phosphate) tris(beta-diketonate) europium (III) complexes have been synthesized by an improved procedure using the Atherton-Todd reaction conditions. N-ethyldiisopropylamine has been used as a mild base and propylene oxide as an acid scavenger in order to obtain poly(oxyethylene phosphate) in yield and purity higher than those achieved by conventional methods. The compounds have been characterized by 1H, 13C, and 31P NMR and FTIR techniques. Their absorption, fluorescent excitation and emission spectra of chloroform and abs. ethanol solutions have been recorded and studied. The luminescent quantum yields and decay times have been determined and a dependence on the length of the oxyethylene spacer between phosphate groups has been established. The new polymer complexes are water soluble and have increased luminescence decay time in comparison with corresponding ternary complexes. PMID:18523877

  13. Genotoxicity of glycol ethers.

    PubMed Central

    McGregor, D B

    1984-01-01

    The genetic toxicology of glycol ethers is reviewed. Ethylene glycol monomethyl ether (EGME) and diglyme have been more extensively studied than other members of this series. Most results indicate a lack of genotoxic potential, but certain tests have yielded positive responses with certain compounds. Ethylene glycol monoethyl ether (EGEE) induced sister chromatid exchanges and chromosomal aberrations in cultured cells. Both EGME and diglyme induced mouse sperm head morphological changes, male rat weak dominant lethal mutations and marked, but reversible, loss of male rat fertility. PMID:6541999

  14. Photoinduced bending behavior of cross-linked azobenzene liquid-crystalline polymer films with a poly(oxyethylene) backbone.

    PubMed

    Lv, Jiu-an; Wang, Weiru; Xu, Jixiang; Ikeda, Tomiki; Yu, Yanlei

    2014-07-01

    Cross-linked azobenzene liquid-crystalline polymer films with a poly(oxyethylene) backbone are synthesized by photoinitiated cationic copolymerization. Azobenzene moieties in the film surface toward the light source are simultaneously photoaligned during photopolymerization with unpolarized 436 nm light and thus form a splayed alignment in the whole film. The prepared films show reversible photoinduced bending behavior with opposite bending directions when different surfaces of one film face to ultraviolet light irradiation. PMID:24771514

  15. Ethylene glycol poisoning

    MedlinePlus

    ... attempt or as a substitute for drinking alcohol (ethanol). This article is for information only. Do NOT ... attempt or as a substitute for drinking alcohol (ethanol). Ethylene glycol is found in many household products, ...

  16. Hyperbranched exopolysaccharide-enhanced foam properties of sodium fatty alcohol polyoxyethylene ether sulfate.

    PubMed

    Deng, Quanhua; Li, Haiping; Sun, Haoyang; Sun, Yange; Li, Ying

    2016-05-01

    The foam properties, such as the foamability, foam stability, drainage, coalescence and bulk rheology, of aqueous solutions containing an eco-friendly exopolysaccharide (EPS) secreted by a deep-sea mesophilic bacterium, Wangia profunda SM-A87, and an anionic surfactant, sodium fatty alcohol polyoxyethylene ether sulfate (AES), were studied. Both the foamability and foam stability of the EPS/AES solutions are considerably higher than those of single AES solutions, even at very low AES concentrations, although pure EPS solutions cannot foam. The improved foamability and foam stability arise from the formation of the EPS/AES complex via hydrogen bonds at the interfaces. The synergism between the EPS and AES decreases the surface tension, increases the interfacial elasticity and water-carrying capacity, and suppresses the coalescence and collapse of the foams. The EPS/AES foams are more salt-resistant than the AES foams. This work provides not only a new eco-friendly foam with great potential for use in enhanced oil recovery and health-care products but also useful guidance for designing other environmentally friendly foam systems that exhibit high performance. PMID:26852104

  17. Effect of protic ionic liquid and surfactant structure on partitioning of polyoxyethylene non-ionic surfactants.

    PubMed

    Topolnicki, Inga L; FitzGerald, Paul A; Atkin, Rob; Warr, Gregory G

    2014-08-25

    The partitioning constants and Gibbs free energies of transfer of poly(oxyethylene) n-alkyl ethers between dodecane and the protic ionic liquids (ILs) ethylammonium nitrate (EAN) and propylammonium nitrate (PAN) are determined. EAN and PAN have a sponge-like nanostructure that consists of interpenetrating charged and apolar domains. This study reveals that the ILs solvate the hydrophobic and hydrophilic parts of the amphiphiles differently. The ethoxy groups are dissolved in the polar region of both ILs by means of hydrogen bonds. The environment is remarkably water-like and, as in water, the solubility of the ethoxy groups in EAN decreases on warming, which underscores the critical role of the IL hydrogen-bond network for solubility. In contrast, amphiphile alkyl chains are not preferentially solvated by the charged or uncharged regions of the ILs. Rather, they experience an average IL composition and, as a result, partitioning from dodecane into the IL increases as the cation alkyl chain is lengthened from ethyl to propyl, because the IL apolar volume fraction increases. Together, these results show that surfactant dissolution in ILs is related to structural compatibility between the head or tail group and the IL nanostructure. Thus, these partitioning studies reveal parameters for the effective molecular design of surfactants in ILs. PMID:24862589

  18. [Chronic ethylene glycol poisoning].

    PubMed

    Kaiser, W; Steinmauer, H G; Biesenbach, G; Janko, O; Zazgornik, J

    1993-04-30

    Over a six-week period a 60-year-old patient had several unexplained intoxication-like episodes. He finally had severe abdominal cramps with changes in the level of consciousness and oligoanuric renal failure (creatinine 4.7 mg/dl). The history, marked metabolic acidosis (pH 7.15, HCO3- 2.2 mmol/l, pCO2 6.6 mmHg) as well as raised anion residue (43 mmol/l) and the presence of oxalates in urine suggested poisoning by ethylene glycol contained in antifreeze liquid. Intensive haemodialysis adequately eliminated ethylene glycol and its toxic metabolites (glycol aldehyde, glycolic acid). Renal function returned within 10 days, although the concentrating power of the kidney remained impaired for several weeks because of interstitial nephritis. The intoxication had been caused by a defective heating-pipe system from which the antifreeze had leaked into the hot-water boiler (the patient had habitually prepared hot drinks by using water from the hot-water tap). Gas chromatography demonstrated an ethylene glycol concentration of 21 g per litre of water. PMID:8482240

  19. Effects of urea on the microstructure and phase behavior of aqueous solutions of polyoxyethylene surfactants

    PubMed Central

    Bianco, Carolina L.; Schneider, Craig S.; Santonicola, Mariagabriella; Lenhoff, Abraham M.; Kaler, Eric W.

    2010-01-01

    Membrane proteins are made soluble in aqueous buffers by the addition of various surfactants (detergents) to form so-called protein-detergent complexes (PDCs). Properties of membrane proteins are commonly assessed by unfolding the protein in the presence of surfactant in a buffer solution by adding urea. The stability of the protein under these conditions is then monitored by biophysical methods such as fluorescence or circular dichroism spectroscopy. Often overlooked in these experiments is the effect of urea on the phase behavior and micellar microstructure of the different surfactants used to form the PDCs. Here the effect of urea on five polyoxyethylene surfactants – n-octylytetraoxyethylene (C8E4), n-octylpentaoxyethylene (C8E5), n-decylhexaoxyethylene (C10E6), n-dodecylhexaoxyethylene (C12E6) and n-dodecyloctaoxylethylene (C12E8) – is explored. The presence of urea increases the critical micelle concentration (CMC) of all surfactants studied, indicating that the concentration of both the surfactant and urea should be considered in membrane protein folding studies. The cloud point temperature of all surfactants studied also increases with increasing urea concentration. Small-angle neutron scattering shows a urea-induced transition from an elongated to a globular shape for micelles of C8E4 and C12E6. In contrast, C8E5 and C12E8 form more globular micelles at room temperature and the micelles remain globular as the urea concentration is increased. The effects of increasing urea concentration on micelle structure are analogous to those of decreasing the temperature. The large changes in micelle structure observed here could also affect membrane protein unfolding studies by changing the structure of the PDC. PMID:21359094

  20. Structures and Surface Properties of "Cyclic" Polyoxyethylene Alkyl Ethers: Unusual Behavior of Cyclic Surfactants in Water.

    PubMed

    Hirose, Yuki; Taira, Toshiaki; Sakai, Kenichi; Sakai, Hideki; Endo, Akira; Imura, Tomohiro

    2016-08-23

    The cyclization of amphiphiles has emerged as an attractive strategy for inducing remarkable properties in these materials without changing their chemical composition. In this study, we successfully synthesized three cyclic polyoxyethylene dodecyl ethers (c-POEC12's) with different ring sizes and explored the effects of their topology on their surface and self-assembly properties related to their function, comparing them with those of their linear counterparts (l-POEC12's). The surface activity of the c-POEC12's remained almost constant despite the change in their hydrophobic and hydrophilic balance (HLB) value, while that of the l-POEC12's decreased with an increase in the HLB value as general surfactants. In contrast to the normal micelles seen in the case of the l-POEC12's (3.4-9.7 nm), the cyclization of the POEC12's resulted in the formation of large spherical structures 72.8-256.8 nm in size. It also led to a dramatic decrease of 28 °C in the cloud point temperature. Furthermore, the cyclization of the POEC12's markedly suppressed the rate of protease hydrolysis caused by the surfactants. The initial rate of reduction of a detergent enzyme from Bacillus licheniformis was increased by more than 40% in the case of c-POE600C12 and c-POE1000C12, even though they exhibited surface activities almost equal to or higher than those of their linear counterparts. These results suggest that cyclization induces unusual aqueous behaviors in POEC12, making the surfactant milder with respect to detergent enzymes while ensuring it exhibits increased surface activity. PMID:27462805

  1. Growth inhibition of Mycobacterium tuberculosis by polyoxyethylene stearate present in the BACTEC pyrazinamide susceptibility test.

    PubMed

    Miller, M A; Thibert, L; Desjardins, F; Siddiqi, S H; Dascal, A

    1996-01-01

    We have previously found that approximately 3.5% of 428 clinical isolates of Mycobacterium tuberculosis yield uninterpretable results in the BACTEC pyrazinamide (PZA) susceptibility test system, because of inadequate growth. We tested the hypothesis that polyoxyethylene stearate (POES), the ingredient of the reconstituting fluid for the test, was the cause of this growth inhibition. A total of 15 isolates known for their previously uninterpretable results and 100 randomly chosen clinical isolates were tested in parallel both with and without POES. Repeat testing of the isolates with previously uninterpretable results yielded results in the presence of POES in only seven (47%). In the absence of POES, all gave interpretable results but one such result showed false resistance. For the other 100 clinical isolates, interpretable results were obtained with and without POES, but growth was enhanced in the absence of POES, especially in the PZA-susceptible strains. This was evidenced by a decreased time to attain a growth index of 200 in the control vial (4.9 days without POES versus 5.8 days with POES; P < 0.001) and a higher mean growth index ratio on the day of interpretation of the test (7.4% without POES versus 2.2% with POES; P < 0.001). However, the enhanced growth without POES led to 20 susceptible strains being misinterpreted as either resistant or borderline. We suggest that isolates of M. tuberculosis which yield uninterpretable results in the BACTEC PZA test system should be retested both with and without POES. If interpretable results indicating PZA resistance are obtained only in the absence of POES, the result should be confirmed by a pyrazinamidase assay or by the conventional proportion method. Routine omission of POES from the BACTEC test for all clinical strains is discouraged because of the unacceptably high false-resistance rates. PMID:8748279

  2. Triethylene glycol monoethyl ether

    Integrated Risk Information System (IRIS)

    Triethylene glycol monoethyl ether ; CASRN 112 - 50 - 5 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  3. Triethylene glycol monobutyl ether

    Integrated Risk Information System (IRIS)

    Triethylene glycol monobutyl ether ; CASRN 143 - 22 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  4. Propylene glycol monoethyl ether

    Integrated Risk Information System (IRIS)

    Propylene glycol monoethyl ether ; CASRN 52125 - 53 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  5. Diethylene glycol dinitrate (DEGDN)

    Integrated Risk Information System (IRIS)

    Diethylene glycol dinitrate ( DEGDN ) ; CASRN 693 - 21 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments

  6. Polyethylene Glycol 3350

    MedlinePlus

    Polyethylene glycol 3350 comes as a powder to be mixed with a liquid and taken by mouth. It is usually taken once a day as needed for up to ... to produce a bowel movement.To use the powder, follow these steps: If you are using polyethylene ...

  7. Dynamics of cyclic and linear poly(oxyethylene) and threading conformation in their blends

    NASA Astrophysics Data System (ADS)

    Nam, Sunghyun

    Understanding the role of chain architecture in dynamics of polymers is important for processing a tremendous number of commercial products. Chemically identical but topologically different cyclic and linear polymers not only result in marked differences in diffusion and flow behaviors, but also lead to unique and unusual transport properties of their blends, where cyclic polymer components have chances to be threaded onto the linear polymer chains. This dissertation addresses the effect of ring architecture on dynamics using different time/distance scale techniques: self-diffusion coefficients by pulsed-field-gradient NMR (PFG NMR), NMR spin-spin relaxation time (T2) and bulk viscosity. The phase transition behaviors of a cyclic polymer and its blend with a linear polymer were investigated by differential scanning calorimetry (DSC) and polarized light microscope as well. The first part of the dissertation focuses on the preparation of highly pure low-molecular-weight cyclic poly(oxyethylene) (CPOE) of different sizes and their dynamics in solution and melts. In deuterated water, CPOE diffused faster for a given chain length than both linear POE (LPOE) and linear POE dimethyl ether (LPOEDE), and had lower T2 values than LPOE across the entire molecular weight range studied. However, the self-diffusion coefficients in the melt state were arranged in the following manner: LPOEDE > CPOE > LPOE, in excellent agreement with T2 and viscosity data, showing topology and chain end effects. Like LPOE, CPOE was found to obey the Rouse model. Compared to the activation energy of viscosity for LPOEDE, CPOE and LPOE exhibited higher values and exhibited less dependence on the molecular weight, which were attributed to the absence of chain-end free volume and the suppression of chain-end free volume by hydrogen bonds, respectively. In the second part of the dissertation, topological threading effect on the dynamics and phase transitions of the blends of CPOE and LPOE having a

  8. Glycol Ethers As Groundwater Contaminants

    NASA Astrophysics Data System (ADS)

    Ross, Benjamin; Johannson, Gunnar; Foster, Gregory D.; Eckel, William P.

    1992-01-01

    Ether derivatives of dihydroxy alcohols, which are formed from ethylene or propylene, comprise an important group of groundwater contaminants known as glycol ethers. Compounds in this group are used as solvents, cleaning agents, and emulsifiers in many chemical products and manufacturing operations. Glycol ethers have been associated with a variety of toxic effects, and some compounds in the group are relatively potent teratogens. The limited information available suggests that glycol ethers are contaminants in groundwater, especially in anaerobic plumes emanating from disposal of mixed industrial and household waste. Most methods used to analyze groundwater samples cannot adequately detect μg/? (ppb) concentrations of glycol ethers, and the existing methods perform worst for the most widely used and toxic species. A new method capable of analyzing μg/? concentrations of glycol ethers was recently developed, and its use is recommended for groundwater samples where glycol ethers are likely to be present.

  9. Polyethylene Glycol Propionaldehydes

    NASA Technical Reports Server (NTRS)

    Harris, Joe M.; Sedaghat-Herati, Mohammad R.; Karr, Laurel J.

    1992-01-01

    New class of compounds derived from polyethylene glycol (PEG's) namely, PEG-propionaldehydes, offers two important advantages over other classes of PEG aldehyde derivatives: compounds exhibit selective chemical reactivity toward amino groups and are stable in aqueous environment. PEG's and derivatives used to couple variety of other molecules, such as, to tether protein molecules to surfaces. Biotechnical and biomedical applications include partitioning of two phases in aqueous media; immobilization of such proteins as enzymes, antibodies, and antigens; modification of drugs; and preparation of protein-rejecting surfaces. In addition, surfaces coated with PEG's and derivatives used to control wetting and electroosmosis. Another potential application, coupling to aminated surfaces.

  10. Interstellar Antifreeze: Ethylene Glycol

    NASA Astrophysics Data System (ADS)

    Hollis, J. M.; Lovas, F. J.; Jewell, P. R.; Coudert, L. H.

    2002-05-01

    Interstellar ethylene glycol (HOCH2CH2OH) has been detected in emission toward the Galactic center source Sagittarius B2(N-LMH) by means of several millimeter-wave rotational torsional transitions of its lowest energy conformer. The types and kinds of molecules found to date in interstellar clouds suggest a chemistry that favors aldehydes and their corresponding reduced alcohols-e.g., formaldehyde (H2CO)/methanol (CH3OH), acetaldehyde (CH3CHO)/ethanol (CH3CH2OH). Similarly, ethylene glycol is the reduced alcohol of glycolaldehyde (CH2OHCHO), which has also been detected toward Sgr B2(N-LMH). While there is no consensus as to how any such large complex molecules are formed in the interstellar clouds, atomic hydrogen (H) and carbon monoxide (CO) could form formaldehyde on grain surfaces, but such surface chemistry beyond that point is uncertain. However, laboratory experiments have shown that the gas-phase reaction of atomic hydrogen (H) and solid-phase CO at 10-20 K can produce formaldehyde and methanol and that alcohols and other complex molecules can be synthesized from cometary ice analogs when subject to ionizing radiation at 15 K. Thus, the presence of aldehyde/reduced alcohol pairs in interstellar clouds implies that such molecules are a product of a low-temperature chemistry on grain surfaces or in grain ice mantles. This work suggests that aldehydes and their corresponding reduced alcohols provide unique observational constraints on the formation of complex interstellar molecules.

  11. Interstellar Antifreeze: Ethylene Glycol

    NASA Technical Reports Server (NTRS)

    Hollis, J. M.; Lovas, F. J.; Jewell, P. R.; Coudert, L. H.

    2002-01-01

    Interstellar ethylene glycol (HOCH2CH2,OH) has been detected in emission toward the Galactic center source Sagittarius B2(N-LMH) by means of several millimeter-wave rotational torsional transitions of its lowest energy conformer. The types and kinds of molecules found to date in interstellar clouds suggest a chemistry that favors aldehydes and their corresponding reduced alcohols-e.g., formaldehyde (H2CO)/methanol (CH3OH), acetaldehyde (CH3CHO)/ethanol (CH3CH2OH). Similarly, ethylene glycol is the reduced alcohol of glycolaldehyde (CH2OHCHO), which has also been detected toward Sgr B2(N-LMH). While there is no consensus as to how any such large complex molecules are formed in the interstellar clouds, atomic hydrogen (H) and carbon monoxide (CO) could form formaldehyde on grain surfaces, but such surface chemistry beyond that point is uncertain. However, laboratory experiments have shown that the gas-phase reaction of atomic hydrogen (H) and solid-phase CO at 10-20 K can produce formaldehyde and methanol and that alcohols and other complex molecules can be synthesized from cometary ice analogs when subject to ionizing radiation at 15 K. Thus, the presence of aldehyde/ reduced alcohol pairs in interstellar clouds implies that such molecules are a product of a low-temperature chemistry on grain surfaces or in grain ice mantles. This work suggests that aldehydes and their corresponding reduced alcohols provide unique observational constraints on the formation of complex interstellar molecules.

  12. Bacterial Utilization of Ether Glycols

    PubMed Central

    Fincher, Edward L.; Payne, W. J.

    1962-01-01

    A soil bacterium capable of using oligo- and polyethylene glycols and ether alcohols as sole sources of carbon for aerobic growth was isolated. The effects of substituent groups added to the ether bonds on the acceptability of the compounds as substrates were studied. Mechanisms for the incorporation of two-carbon compounds were demonstrated by the observation that acetate, glyoxylate, ethylene glycol, and a number of the tricarboxylic acid cycle intermediates served as growth substrates in minimal media. The rate of oxidation of the short-chained ethylene glycols by adapted resting cells varied directly with increasing numbers of two-carbon units in the chains from one to four. The amount of oxygen consumed per carbon atom of oligo- and polyethylene glycols was 100% of theoretical, but only 67% of theoretical for ethylene glycol. Resting cells oxidized oligo- and polyethylene glycols with 2 to 600 two-carbon units in the chains. Longer chained polyethylene glycols (up to 6,000) were oxidized at a very slow rate by these cells. Dehydrogenation of triethylene glycol by adapted cells was observed, coupling the reaction with methylene blue reduction. PMID:13945208

  13. Photorespiratory glycolate-glyoxylate metabolism.

    PubMed

    Dellero, Younès; Jossier, Mathieu; Schmitz, Jessica; Maurino, Veronica G; Hodges, Michael

    2016-05-01

    Photorespiration is one of the major carbon metabolism pathways in oxygen-producing photosynthetic organisms. This pathway recycles 2-phosphoglycolate (2-PG), a toxic metabolite, to 3-phosphoglycerate when ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) uses oxygen instead of carbon dioxide. The photorespiratory cycle is in competition with photosynthetic CO2 fixation and it is accompanied by carbon, nitrogen and energy losses. Thus, photorespiration has become a target to improve crop yields. Moreover, during the photorespiratory cycle intermediate metabolites that are toxic to Calvin-Benson cycle and RuBisCO activities, such as 2-PG, glycolate and glyoxylate, are produced. Thus, the presence of an efficient 2-PG/glycolate/glyoxylate 'detoxification' pathway is required to ensure normal development of photosynthetic organisms. Here we review our current knowledge concerning the enzymes that carry out the glycolate-glyoxylate metabolic steps of photorespiration from glycolate production in the chloroplasts to the synthesis of glycine in the peroxisomes. We describe the properties of the proteins involved in glycolate-glyoxylate metabolism in Archaeplastida and the phenotypes observed when knocking down/out these specific photorespiratory players. Advances in our understanding of the regulation of glycolate-glyoxylate metabolism are highlighted. PMID:26994478

  14. Comparison of Oxygen Gauche Effects in Poly(Oxyethylene) and Poly(ethylene terephtylene) Based on Quantum Chemistry Calculations

    NASA Technical Reports Server (NTRS)

    Jaffe, Richard; Han, Jie; Yoon, Do; Langhoff, Stephen R. (Technical Monitor)

    1997-01-01

    The so-called oxygen gauche effect in poly(oxyethylene) (POE) and its model molecules such as 1,2-dimethoxyethane (DME) and diglyme (CH3OC2H4OC2H4OCH3) is manifested in the preference for gauche C-C bond conformations over trans. This has also been observed for poly(ethylene terephthalate) (PET). Our previous quantum chemistry calculations demonstrated that the large C-C gauche population in DME is due, in part, to a low-lying tg +/- g+ conformer that exhibits a substantial 1,5 CH ... O attraction. New calculations will be described that demonstrate the accuracy of the original quantum chemistry calculations. In addition, an extension of this work to model molecules for PET will be presented. It is seen that the C-C gauche preference is much stronger in 1,2 diacetoxyethane than in DME. In addition, there exist low-lying tg +/- g+/- and g+/-g+/-g+/- conformers that exhibit 1,5 CH ... O attractions involving the carbonyl oxygens. It is expected that the -O-C-C-O- torsional properties will be quite different in these two polymers. The quantum chemistry results are used to parameterize rotational isomeric states models (RIS) and force fields for molecular dynamics simulations of these polymers.

  15. Spontaneous Emulsification of Triolein Induced by Mixed Micellar Solutions of Sodium Polyoxyethylene Alkyl Ether Sulfate and Dodecyldimethyl Amine Oxide.

    PubMed

    Endo, Chika; Ito, Yoshiko; Akabane, Chika; Kaneko, Yukihiro; Sakai, Hideki

    2015-01-01

    A new mechanism of spontaneous emulsification without any salts or co-solvents is described, and is related to the dilatational behavior. Spontaneous emulsification can reduce the time required to remove oily soils from hard surfaces and enhance the detergency, because this type of emulsification requires no external mechanical work. In this paper, we focused on triolein, the main component of food oils and human sebum soil, and tried to induce spontaneous emulsification by using mixed micellar solutions of sodium polyoxyethylene alkyl ether sulfate and N, N-dimethyldodecylamine oxide (AES/DDAO). We characterized the dilatation of the oil/water interface using dynamic interfacial tension and elasticity measurements. This study confirmed that the degree of spontaneous emulsification can be enhanced by controlling the molar ratio of DDAO to AES. This enhancement can be attributed to an increased rate of decrease in the dynamic interfacial tension (i.e., a decreased interface dilatational elasticity), allowing for much greater suppression of the Marangoni effect. Further, we determined that one of the reasons for the decrease in the interface dilatational elasticity is the increasing number of micelles near the oil drop interface, which results from a decrease in the electrostatic repulsion between the micelles and the drop interface. Therefore, controlling the molar ratio of a mixed anionic/amphoteric surfactant solution is an effective way to induce spontaneous emulsification in the absence of salts or co-solvents. PMID:26250425

  16. Inhibitory effects of polyoxyethylene stearate, PANTA, and neutral pH on growth of Mycobacterium genavense in BACTEC primary cultures.

    PubMed

    Realini, L; Van Der Stuyft, P; De Ridder, K; Hirschel, B; Portaels, F

    1997-11-01

    We report on the influences of polyoxyethylene stearate (POES), PANTA, and pH on primary cultures of Mycobacterium genavense in BACTEC vials. As a model for primary cultures from tissue, seven different strains first isolated from AIDS patients (five from Switzerland and two from the United States) were inoculated into nude mice in order to obtain large amounts of bacilli to test different conditions simultaneously. Our results demonstrate that the size of the inoculum (10[6] acid-fast bacilli/vial), an acid pH (pH 6.0), and the absence of additives (POES and PANTA) significantly (P < 0.001) increased the probability of a successful culture in 1 month, considering growth index (GI) of > or =100 or a GI of > or =999 as criterion of success. In logistic regression analysis, all factors maintained a significant (P < 0.001) independent effect, and no interactions were observed between them. The best conditions for the primary cultures of M. genavense were the use of Middlebrook 7H12 medium at pH 6.0 without any additives. PMID:9350735

  17. Bactericidal activity of propylene glycol, glycerine, polyethylene glycol 400, and polyethylene glycol 1000 against selected microorganisms

    PubMed Central

    Nalawade, Triveni Mohan; Bhat, Kishore; Sogi, Suma H. P.

    2015-01-01

    Aim: The aim of the present study was to evaluate the bactericidal activity of propylene glycol, glycerine, polyethylene glycol 400 (PEG 400), and polyethylene glycol 1000 (PEG 1000) against selected microorganisms in vitro. Materials and Methods: Five vehicles, namely propylene glycol, glycerine, PEG 400, PEG 1000, and combination of propylene glycol with PEG 400, were tested for their bactericidal activity. The minimum bactericidal concentration was noted against four standard strains of organisms, i.e. Streptococcus mutans American Type Culture Collection (ATCC) 25175, Streptococcus mutans ATCC 12598, Enterococcus faecalis ATCC 35550, and Escherichia coli ATCC 25922, using broth dilution assay. Successful endodontic therapy depends upon thorough disinfection of root canals. In some refractory cases, routine endodontic therapy is not sufficient, so intracanal medicaments are used for proper disinfection of canals. Intracanal medicaments are dispensed with vehicles which aid in increased diffusion through the dentinal tubules and improve their efficacy. Among the various vehicles used, glycerine is easily available, whereas others like propylene glycol and polyethylene glycol have to be procured from appropriate sources. Also, these vehicles, being viscous, aid in sustained release of the medicaments and improve their handling properties. The most commonly used intracanal medicaments like calcium hydroxide are ineffective on many microorganisms, while most of the other medicaments like MTAD (Mixture of Tetracycline, an Acid, and a Detergent) and Triple Antibiotic Paste (TAP) consist of antibiotics which can lead to development of antibiotic resistance among microorganisms. Thus, in order to use safer and equally effective intracanal medicaments, newer alternatives like chlorhexidine gluconate, ozonized water, etc., are being explored. Similarly, the five vehicles mentioned above are being tested for their antimicrobial activity in this study. Results: All vehicles

  18. High performance of transferring lithium ion for polyacrylonitrile-interpenetrating crosslinked polyoxyethylene network as gel polymer electrolyte.

    PubMed

    Kuo, Ping-Lin; Wu, Ching-An; Lu, Chung-Yu; Tsao, Chin-Hao; Hsu, Chun-Han; Hou, Sheng-Shu

    2014-03-12

    A polyacrylonitrile (PAN)-interpenetrating cross-linked polyoxyethylene (PEO) network (named XANE) was synthesized acting as separator and as gel polymer electrolytes simultaneously. SEM images show that the surface of the XANE membrane is nonporous, comparing to the surface of the commercial separator to be porous. This property results in excellent electrolyte uptake amount (425 wt %), and electrolyte retention for XANE membrane, significantly higher than that of commercial separator (200 wt %). The DSC result indicates that the PEO crystallinity is deteriorated by the cross-linked process and was further degraded by the interpenetration of the PAN. The XANE membrane shows significantly higher ionic conductivity (1.06-8.21 mS cm(-1)) than that of the commercial Celgard M824 separator (0.45-0.90 mS cm(-1)) ascribed to the high electrolyte retention ability of XANE (from TGA), the deteriorated PEO crystallinity (from DSC) and the good compatibility between XANE and electrode (from measuring the interfacial-resistance). For battery application, under all charge/discharge rates (from 0.1 to 3 C), the specific half-cell capacities of the cell composed of the XANE membrane are all higher than those of the aforementioned commercial separator. More specifically, the cell composed of the XANE membrane has excellent cycling stability, that is, the half-cell composed of the XANE membrane still exhibited more than 97% columbic efficiency after 100 cycles at 1 C. The above-mentioned advantageous properties and performances of the XANE membrane allow it to act as both an ionic conductor as well as a separator, so as to work as separator-free gel polymer electrolytes. PMID:24521309

  19. Colorometric detection of ethylene glycol vapor

    NASA Technical Reports Server (NTRS)

    Helm, C.; Mosier, B.; Verostko, C. E.

    1970-01-01

    Very low concentrations of ethylene glycol in air or other gases are detected by passing a sample through a glass tube with three partitioned compartments containing reagents which successively convert the ethylene glycol vapor into a colored compound.

  20. Propylene glycol monomethyl ether (PGME)

    Integrated Risk Information System (IRIS)

    Propylene glycol monomethyl ether ( PGME ) ; CASRN 107 - 98 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assess

  1. GLYCOLIC - FORMIC ACID FLOWSHEET DEVELOPMENT

    SciTech Connect

    Pickenheim, B.; Stone, M.; Newell, J.

    2010-11-08

    Flowsheet testing was performed to further develop the nitric/glycolic/formic acid flowsheet as an alternative to the nitric/formic flowsheet currently being processed at the DWPF. This new flowsheet has shown that mercury can be removed in the Sludge Receipt and Adjustment Tank (SRAT) with minimal hydrogen generation. All other processing objectives were also met, including greatly reducing the Slurry Mix Evaporator (SME) product yield stress as compared to the baseline nitric/formic flowsheet. Eight runs were performed in total, including the baseline run. The baseline nitric/formic flowsheet run was extremely difficult to process under existing DWPF acceptance criteria with this simulant at the HM levels of noble metals. While nitrite was destroyed and mercury was removed to near the DWPF limit, the rheology of the SRAT and SME products were well above design basis and hydrogen generation far exceeded the DWPF limit. In addition, mixing during the SME cycle was very poor. In this sense, the nitric/glycolic/formic acid flowsheet represents a significant upgrade over the current flowsheet. In the nitric/glycolic/formic flowsheet runs, mercury was successfully removed with almost no hydrogen generation and the SRAT and SME products yield stresses were within process limits or previously processed ranges. It is recommended that DWPF continue to support development of the nitric/glycolic/formic flowsheet. Although experience is limited at this time, this flowsheet meets or outperforms the current flowsheet in many regards, including off-gas generation, mercury removal, product rheology and general ease of processing. Additional flowsheet testing will allow for a more thorough understanding of the chemistry and effectiveness of the flowsheet over a range of sludge compositions and formic/glycolic ratios. This testing will also show whether the REDOX and metal solubility concerns with this change in the flowsheet can be addressed by just adjusting the volumes of

  2. 21 CFR 184.1666 - Propylene glycol.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Propylene glycol. 184.1666 Section 184.1666 Food... GRAS § 184.1666 Propylene glycol. (a) Propylene glycol (C3H8O2, CAS Reg. No. 57-55-6) is known as 1,2-propanediol. It does not occur in nature. Propylene glycol is manufactured by treating propylene...

  3. 21 CFR 184.1666 - Propylene glycol.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Propylene glycol. 184.1666 Section 184.1666 Food... Specific Substances Affirmed as GRAS § 184.1666 Propylene glycol. (a) Propylene glycol (C3H8O2, CAS Reg. No. 57-55-6) is known as 1,2-propanediol. It does not occur in nature. Propylene glycol is...

  4. 21 CFR 184.1666 - Propylene glycol.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Propylene glycol. 184.1666 Section 184.1666 Food... Specific Substances Affirmed as GRAS § 184.1666 Propylene glycol. (a) Propylene glycol (C3H8O2, CAS Reg. No. 57-55-6) is known as 1,2-propanediol. It does not occur in nature. Propylene glycol is...

  5. RUMINAL FERMENTATION OF PROPYLENE GLYCOL AND GLYCEROL

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Bovine rumen fluid was fermented anaerobically with 25 mM R-propylene glycol, S-propylene glycol, or glycerol added. After 24 h all of the propylene glycol enantiomers and approximately 80% of the glycerol were metabolized. Acetate, propionate, butyrate, valerate, and caproate concentrations, in dec...

  6. Glycolate transporter of the pea chloroplast envelope

    SciTech Connect

    Howitz, K.T.

    1985-01-01

    The discovery of a glycolate transporter in the pea (Pisum sativum) chloroplast envelope is described. Several novel silicone oil centrifugation methods were developed to resolve the initial rate kinetics of (/sup 14/C)glycolate transport by isolated, intact pea chloroplasts. Chloroplast glycolate transport was found to be carrier mediated. Transport rates saturated with increasing glycolate concentration. N-Ethylmaleimide (NEM) pretreatment of chloroplasts inhibited transport, an inhibition prevented by glycolate. Glycolate distributed across the envelope in a way which equalized stromal and medium glycolic acid concentrations, limiting possible transport mechanisms to facilitated glycolic acid diffusion, proton symport or hydroxyl antiport. The effects of stomal and medium pH's on the K/sub m/ and V/sub max/ fit the predictions of mobile carrier kinetic models of hydroxyl antiport or proton symport (H/sup +/ binds first). The carrier mediated transport was fast enough to be consistent with in vivo rates of photorespiration. The 2-hydroxymonocarboxylates, glycerate, lactate and glyoxylate are competitive inhibitors of chloroplast glycolate uptake. Glyoxylate, D-lactate and D-glycerate cause glycolate counterflow, indicating that they are also substrates of the glycolate carrier. This finding was confirmed for D-glycerate by studies on glycolate effects on (1-/sup 14/C)D-glycerate transport.

  7. 21 CFR 582.1666 - Propylene glycol.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Propylene glycol. 582.1666 Section 582.1666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1666 Propylene glycol. (a) Product. Propylene glycol. (b) Conditions of use. This...

  8. 21 CFR 582.4666 - Propylene glycol.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Propylene glycol. 582.4666 Section 582.4666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Propylene glycol. (a) Product. Propylene glycol. (b) Conditions of use. This substance is...

  9. 21 CFR 582.4666 - Propylene glycol.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Propylene glycol. 582.4666 Section 582.4666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Propylene glycol. (a) Product. Propylene glycol. (b) Conditions of use. This substance is...

  10. 21 CFR 582.1666 - Propylene glycol.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Propylene glycol. 582.1666 Section 582.1666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1666 Propylene glycol. (a) Product. Propylene glycol. (b) Conditions of use. This...

  11. Pumping glycol solutions in the HVAC industry

    SciTech Connect

    Rishel, J.B.; Schlachter, J.P.

    1997-12-31

    Ethylene and propylene glycols are used in heating, ventilating, and airconditioning (HVAC) water systems for operations that can occur below the freezing point of pure water. Typical applications are for generating ice storage and preventing freezing in coils that are exposed to outside air. The type of glycol and the percentage of solution to be used are decisions that are made by the designer of the water system utilizing the glycols. The purpose of this paper is to (1) present the basic procedures required for the selection of piping and pumps for the glycol that has been selected for a particular water system and (2) to demonstrate the effect that the specific gravity and the viscosity of the glycol solution can have on pipe friction and pump performance. Although much of this information has been presented in other ASHRAE technical documents, it is repeated here in the hopes that a relatively simple procedure will be provided for determining the effect of glycol solution viscosity and specific gravity upon piping design and pump operation. A brief review will be made of a glycol`s characteristics followed by the procedures for calculation of piping friction for a glycol system and computation of pump performance. Review also will be made of the use of variable-speed pumping on glycol systems. All of the information will be based upon ethylene glycol; similar data and calculations could be generated for propylene glycol.

  12. 21 CFR 582.1666 - Propylene glycol.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Propylene glycol. 582.1666 Section 582.1666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1666 Propylene glycol. (a) Product. Propylene glycol. (b) Conditions of use. This...

  13. 21 CFR 582.1666 - Propylene glycol.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Propylene glycol. 582.1666 Section 582.1666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1666 Propylene glycol. (a) Product. Propylene glycol. (b) Conditions of use. This...

  14. 21 CFR 582.4666 - Propylene glycol.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Propylene glycol. 582.4666 Section 582.4666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Propylene glycol. (a) Product. Propylene glycol. (b) Conditions of use. This substance is...

  15. 21 CFR 582.4666 - Propylene glycol.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Propylene glycol. 582.4666 Section 582.4666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Propylene glycol. (a) Product. Propylene glycol. (b) Conditions of use. This substance is...

  16. 21 CFR 582.4666 - Propylene glycol.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Propylene glycol. 582.4666 Section 582.4666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Propylene glycol. (a) Product. Propylene glycol. (b) Conditions of use. This substance is...

  17. 21 CFR 582.1666 - Propylene glycol.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Propylene glycol. 582.1666 Section 582.1666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1666 Propylene glycol. (a) Product. Propylene glycol. (b) Conditions of use. This...

  18. Phase behavior of a mixture of poly(isoprene)-poly(oxyethylene) diblock copolymer and poly(oxyethylene) surfactant in water.

    PubMed

    Kunieda, Hironobu; Kaneko, Masaya; López-Quintela, M Arturo; Tsukahara, Masahiko

    2004-03-16

    The phase behavior of a mixture of poly(isoprene)-poly(oxyethylene) diblock copolymer (PI-PEO or C250EO70) and poly(oxyethylene) surfactant (C12EO3, C12EO5, C12EO6, C12EO7, and C12EO9) in water was investigated by phase study, small-angle X-ray scattering, and dynamic light scattering (DLS). The copolymer is not soluble in surfactant micellar cubic (I1), hexagonal (H1), and lamellar (Lalpha) liquid crystals, whereas an isotropic copolymer fluid phase coexists with these liquid crystals. Although the PI-PEO is relatively lipophilic, it increases the cloud temperatures of C12EO3-9 aqueous solutions at a relatively high PI-PEO content in the mixture. Most probably, in the copolymer-rich region, PI-PEO and C12EOn form a spherical composite micelle in which surfactant molecules are located at the interface and the PI chains form an oil pool inside. In the C12EO5/ and C12EO6/PI-PEO systems, one kind of micelles is produced in the wide range of mixing fraction, although macroscopic phase separation was observed within a few days after the sample preparation. On the other hand, small surfactant micelles coexist with copolymer giant micelles in C12EO7/ and C12EO9/PI-PEO aqueous solutions in the surfactant-rich region. The micellar shape and size are calculated using simple geometrical relations and compared with DLS data. Consequently, a large PI-PEO molecule is not soluble in surfactant bilayers (Lalpha phase), infinitely long rod micelles (H1 phase), and spherical micelles (I1 phase or hydrophilic spherical micelles) as a result of the packing constraint of the large PI chain. However, the copolymer is soluble in surfactant rod micelles (C12EO5 and C12EO6) because a rod-sphere transition of the surfactant micelles takes place and the long PI chains are incorporated inside the large spherical micelles. PMID:15835666

  19. Propylene Glycol Poisoning From Excess Whiskey Ingestion

    PubMed Central

    Ku, Kevin; Sue, Gloria R.

    2015-01-01

    In this report, we describe a case of high anion gap metabolic acidosis with a significant osmolal gap attributed to the ingestion of liquor containing propylene glycol. Recently, several reports have characterized severe lactic acidosis occurring in the setting of iatrogenic unintentional overdosing of medications that use propylene glycol as a diluent, including lorazepam and diazepam. To date, no studies have explored potential effects of excess propylene glycol in the setting of alcohol intoxication. Our patient endorsed drinking large volumes of cinnamon flavored whiskey, which was likely Fireball Cinnamon Whisky. To our knowledge, this is the first case of propylene glycol toxicity from an intentional ingestion of liquor containing propylene glycol. PMID:26904700

  20. Final report on the safety assessment of PEG-25 propylene glycol stearate, PEG-75 propylene glycol stearate, PEG-120 propylene glycol stearate, PEG-10 propylene glycol, PEG-8 propylene glycol cocoate, and PEG-55 propylene glycol oleate.

    PubMed

    Johnson, W

    2001-01-01

    The ingredients considered in this safety assessment are polyethylene glycol ethers of either propylene glycol itself, propylene glycol stearate, propylene glycol oleate, or propylene glycol cocoate. They function in cosmetic formulations as surfactant--cleansing agents; surfactant-solubilizing agents; surfactant--emulsifying agents; skin conditioning agents--humectant; skin-conditioning agents--emollient; and solvents. Those in current use are used in only a small number of cosmetic formulations. Some are not currently used. Polyethylene Glycol (PEG) Propylene Glycol Cocoates and PEG Propylene Glycol Oleates are produced by the esterification of polyoxyalkyl alcohols with lauric acid and oleic acid, respectively. Although there is no information available on the method of manufacture of the other polymers, information was available describing impurities, including ethylene oxide (maximum 1 ppm), 1,4-dioxane (maximum 5 ppm), polycyclic aromatic compounds (maximum 1 ppm), and heavy metals-lead, iron, cobalt, nickel, cadmium, and arsenic included (maximum 10 ppm combined). In an acute oral toxicity study, PEG-25 Propylene Glycol Stearate was not toxic. An antiperspirant product containing 2.0% PEG-25 Propylene Glycol Stearate was nonirritating to mildly irritating to the eyes of rabbits. This product was also practically nonirritating to the skin of rabbits in single-insult occlusive patch tests. In a guinea pig sensitization test, PEG-25 Propylene Glycol Stearate was classified as nonallergenic at challenge concentrations of 25% and 50% in petrolatum. PEG-25 Propylene Glycol Stearate and PEG-55 Propylene Glycol Oleate were negative in clinical patch tests. Based on the available data, it was concluded that these ingredients are safe as used (concentrations no greater than 10%) in cosmetic formulations. Based on evidence of sensitization and nephrotoxicity in burn patients treated with a PEG-based antimicrobial preparation, the ingredients included in this review

  1. Unraveling the binding mechanism of polyoxyethylene sorbitan esters with bovine serum albumin: a novel theoretical model based on molecular dynamic simulations.

    PubMed

    Delgado-Magnero, Karelia H; Valiente, Pedro A; Ruiz-Peña, Miriam; Pérez-Gramatges, Aurora; Pons, Tirso

    2014-04-01

    To gain a better understanding of the interactions governing the binding mechanism of proteins with non-ionic surfactants, the association processes of Tween 20 and Tween 80 with the bovine serum albumin (BSA) protein were investigated using molecular dynamics (MD) simulations. Protein:surfactant molar ratios were chosen according to the critical micelle concentration (CMC) of each surfactant in the presence of BSA. It was found that both the hydrophilic and the hydrophobic groups of the BSA equally contribute to the surface area of interaction with the non-ionic surfactants. A novel theoretical model for the interactions between BSA and these surfactants at the atomic level is proposed, where both surfactants bind to non-specific domains of the BSA three-dimensional structure mainly through their polyoxyethylene groups, by hydrogen bonds and van der Waals interactions. This is well supported by the strong electrostatic and van der Waals interaction energies obtained in the calculations involving surfactant polyoxyethylene groups and different protein regions. The results obtained from the MD simulations suggest that the formation of surfactant clusters over the BSA structure, due to further cooperative self-assembly of Tween molecules, could increase the protein conformational stability. These results extend the current knowledge on molecular interactions between globular proteins and non-ionic surfactants, and contribute to the fine-tuning design of protein formulations using polysorbates as excipients for minimizing the undesirable effects of protein adsorption and aggregation. PMID:24309134

  2. Surface Adsorption and Micelle Formation of Polyoxyethylene-type Nonionic Surfactants in Mixtures of Water and Hydrophilic Imidazolium-type Ionic Liquid.

    PubMed

    Misono, Takeshi; Okada, Kohei; Sakai, Kenichi; Abe, Masahiko; Sakai, Hideki

    2016-06-01

    The interfacial properties of polyoxyethylene alkyl ether-type nonionic surfactants (CnEm) were studied in a hydrophilic room-temperature ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4), in the presence of water. These properties were assessed using static surface tension, pyrene fluorescence, and dynamic light scattering measurements. The interfacial properties were strongly dependent on the solution composition. Increased water concentration lowered the critical micelle concentration (cmc). The cmc was also affected by the lengths of both the alkyl and polyoxyethylene chains, but a greater impact was observed for the alkyl chain length. These results indicate that micellization occurs as a result of solvophobic interaction between surfactant molecules in the water/bmimBF4 mixed solutions, similar to aqueous surfactant systems. The cloud point phenomenon was observed for CnEm with a relatively low hydrophilic-lipophilic balance (HLB) value, and the relationship between the cloud point and water/bmimBF4 composition exhibited a convex upward curve. Furthermore, the mixing of bmimBF4 with water increased the surfactant solubility for water-rich compositions, suggesting that bmimBF4 acts as a chaotropic salt. PMID:27181249

  3. Ethylene glycol poisoning in sheep.

    PubMed

    2015-05-16

    Oxalate toxicity in sheep as a consequence of exposure to ethylene glycol. Chlamydophila abortus infection in a dairy cow. Neosporosis diagnosed in a newborn lamb with deformities. Yersiniosis affecting a 1000-strong goat herd. Porcine reproductive and respiratory syndrome causing blue ears in 14-week-old pigs. Avian tuberculosis diagnosed in an adult Mandarin duck. These are among matters discussed in the Animal and Plant Health Agency's (APHA's) disease surveillance report for January and February 2015. PMID:25977491

  4. Measuring exposures to glycol ethers.

    PubMed

    Clapp, D E; Zaebst, D D; Herrick, R F

    1984-08-01

    In 1981, NIOSH began investigating the potential reproductive health effects resulting from exposures to a class of organic solvents known generically as glycol ethers (GE). This research was begun as a result of the NIOSH criteria document development program which revealed little data available on the health effects of glycol ether exposure. Toxicologic research was begun by NIOSH and other researchers which suggested substantial reproductive effects in animals. These animal data motivated a study of human exposures in the occupational setting. In 1981 and 1982 NIOSH conducted several walk-through surveys which included preliminary measurements of exposures in a variety of industries including painting trades, coal mining, production blending and distribution facilities, aircraft fueling, and communications equipment repair facilities. The human exposure data from these surveys is summarized in this paper with most results well below 1 parts per million (ppm) and only a few values approaching 10 ppm. Blood samples were collected at one site resulting in GE concentrations below the limit of detection. Exposures to airborne glycol ethers, in the industries investigated during the collection of this data, revealed several problems in reliably sampling GE at low concentrations. It became apparent, from the data and observations of work practices, that air monitoring alone provided an inadequate index of GE exposure. Further field studies of exposure to GE are anticipated, pending location of additional groups of exposed workers and development of more reliable methods for characterizing exposure, especially biological monitoring. PMID:6499824

  5. Why use glycols in HVAC systems?

    SciTech Connect

    Eppelheimer, D.M.

    1997-12-31

    Glycols are used to prevent damage to heating, ventilating, and airconditioning (HVAC) equipment due to freezing and corrosion. Two glycols enjoy wide acceptance--ethylene glycol and propylene glycol. Both glycols have lower heat transfer characteristics and increased pumping requirements when compared to water. The loss of heat transfer and the increase in pumping power are influenced by temperature and the concentration of the fluid. The physical effects of glycol are almost unnoticed in heating systems where higher temperatures prevail. However, in cooling applications, the effect of glycol on system capacity and pump power must be carefully considered. Capricious addition of glycol to cooling systems is inappropriate. The effects of glycol can be mitigated by careful selection of equipment. This paper illustrates methods by which to reduce the impact of glycols when selecting cooling coils and chillers. Techniques such as increasing log mean temperature difference (LMTD) and modifications in coil circuiting or tube geometry can have a dramatic effect. The benefits of these techniques will be reviewed.

  6. The world of DNA in glycol solution.

    PubMed

    Lindahl, Tomas

    2016-05-23

    The properties of high-molecular-weight DNA are usually investigated in neutral aqueous solutions. Strong acids and strong alkaline solutions are obviously unsuitable, as are corrosive solvents, and DNA is insoluble in most organic solvents; precipitation of DNA from aqueous solution with ethanol or isopropanol is therefore frequently used as a purification step. An exception is the organic solvent glycol (ethylene glycol, 1,2-ethanediol, dihydroxyethane, HOCH2CH2OH) and the similar solvent glycerol. Double-stranded DNA remains soluble in salt-containing glycol, although it precipitates in polyethylene glycol. (DNA also remains soluble in formamide, but the double-helical structure of DNA is much less stable in this solvent than in glycol.) However, DNA in glycol has been little investigated during the last half-century. PMID:27211487

  7. Cooling in the tropics: ethylene glycol overdose.

    PubMed

    Holyoak, Adam L; Fraser, Todd A; Gelperowicz, Pascal

    2011-03-01

    Ethylene glycol is the active ingredient used in radiator antifreeze. Severe ingestions of ethylene glycol are uncommon in Australia, but if untreated, can result in multiorgan dysfunction, particularly renal failure and cerebral oedema. We report on a patient who consumed a large quantity of ethylene glycol. He was treated with enteral ethanol and went on to make a full recovery, despite an initial moribund state. We briefly review the pathophysiology and current treatment strategies for ethylene glycol intoxication, and discuss issues surrounding enteral versus parenteral ethanol administration. PMID:21355826

  8. Ethylene glycol, hazardous substance in the household.

    PubMed

    Patocka, Jirí; Hon, Zdenek

    2010-01-01

    Ethylene glycol is a colorless, odorless, sweet-tasting but poisonous type of alcohol found in many household products. The major use of ethylene glycol is as an antifreeze in, for example, automobiles, in air conditioning systems, in de-icing fluid for windshields, and else. People sometimes drink ethylene glycol mistakenly or on purpose as a substitute for alcohol. Ethylene glycol is toxic, and its drinking should be considered a medical emergency. The major danger from ethylene glycol is following ingestion. Due to its sweet taste, peoples and occasionally animals will sometimes consume large quantities of it if given access to antifreeze. While ethylene glycol itself has a relatively low degree of toxicity, its metabolites are responsible for extensive cellular damage to various tissues, especially the kidneys. This injury is caused by the metabolites, glycolic and oxalic acid and their respective salts, through crystal formation and possibly other mechanisms. Toxic metabolites of ethylene glycol can damage the brain, liver, kidneys, and lungs. The poisoning causes disturbances in the metabolism pathways, including metabolic acidosis. The disturbances may be severe enough to cause profound shock, organ failure, and death. Ethylene glycol is a common poisoning requiring antidotal treatment. PMID:20608228

  9. 21 CFR 172.858 - Propylene glycol alginate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Propylene glycol alginate. 172.858 Section 172.858... Propylene glycol alginate. The food additive propylene glycol alginate (CAS Reg. No. 9005-37-2) may be used... the act: (1) The name of the additive, “propylene glycol alginate” or “propylene glycol ester...

  10. Microemulsion Using Polyoxyethylene Sorbitan Trioleate and its Usage for Skin Delivery of Resveratrol to Protect Skin against UV-Induced Damage.

    PubMed

    Yutani, Reiko; Teraoka, Reiko; Kitagawa, Shuji

    2015-01-01

    We examined the phase behavior of various polyoxyethylene sorbitan fatty acid ester (polysorbates)/ethanol/isopropyl myristate (IPM)/150 mM NaCl solution (NaClaq) systems in order to prepare a microemulsion containing a low ratio of ethanol, which is more suitable for in vivo application. Using polyoxyethylene sorbitan trioleate (Tween 85), which has a large lipophilic moiety, as a surfactant component, single-phase domain of the phase diagram was the largest of all the polysorbates examined, and in particular a large oil-rich single-phase domain was obtained. When the ratio of Tween 85 to ethanol was changed from 1 : 1 to 3 : 1, the oil-rich single-phase domain further expanded, which led to a reduced ethanol concentration in the preparation. Thus, we determined the composition of the microemulsion to be Tween 85 : ethanol : IPM : NaClaq=30 : 10 : 53 : 7, and used it for skin delivery of resveratrol. Microemulsion gel was also prepared by adding 6.5% Aerosil) 200 into the microemulsion for ease of topical application. When applied with each vehicle, delivery of resveratrol into guinea pig skin in vitro was significantly enhanced compared with that by IPM, and resveratrol incorporated into the skin by microemulsion gel decreased lipid peroxidation to 29.5% compared with that of the control. Pretreatment of guinea pig dorsal skin with the microemulsion gel containing resveratrol almost completely prevented UV-B-induced erythema formation in vivo. These findings demonstrate that the microemulsion using Tween 85 containing a minimal concentration of ethanol enhanced the skin delivery of resveratrol and the incorporated resveratrol exhibited a protective effect against UV-induced oxidative damage. PMID:26329869

  11. The Occurrence of Glycolate Dehydrogenase and Glycolate Oxidase in Green Plants

    PubMed Central

    Frederick, Sue Ellen; Gruber, Peter J.; Tolbert, N. E.

    1973-01-01

    Homogenates of various lower land plants, aquatic angiosperms, and green algae were assayed for glycolate oxidase, a peroxisomal enzyme present in green leaves of higher plants, and for glycolate dehydrogenase, a functionally analogous enzyme characteristic of certain green algae. Green tissues of all lower land plants examined (including mosses, liverworts, ferns, and fern allies), as well as three freshwater aquatic angiosperms, contained an enzyme resembling glycolate oxidase, in that it oxidized l- but not d-lactate in addition to glycolate, and was insensitive to 2 mm cyanide. Many of the green algae (including Chlorella vulgaris, previously claimed to have glycolate oxidase) contained an enzyme resembling glycolate dehydrogenase, in that it oxidized d- but not l-lactate, and was inhibited by 2 mm cyanide. Other green algae had activity characteristic of glycolate oxidase and, accordingly, showed a substantial glycolate-dependent O2 uptake. It is pointed out that this distribution pattern of glycolate oxidase and glycolate dehydrogenase among the green plants may have phylogenetic significance. Activities of catalase, a marker enzyme for peroxisomes, were also determined and were generally lower in the algae than in the land plants or aquatic angiosperms. Among the algae, however, there were no consistent correlations between levels of catalase and the type of enzyme which oxidized glycolate. PMID:16658555

  12. Analysis of automobile radiator performance with ethylene glycol/water and propylene glycol/water coolants

    SciTech Connect

    Gollin, M.; Bjork, D.

    1996-12-31

    The heat transfer and hydraulic performance of the following coolants was examined in five automobile radiators in a wind tunnel: 100% water; 100% propylene glycol; 70/30 propylene glycol/water (volume); 50/50 propylene glycol/water (volume); 70/30 ethylene glycol/water (volume); 50/50 ethylene glycol water (volume). The results of these studies are presented to demonstrate the relative performance of these coolant mixtures in terms of heat transfer, coolant pressure drop and radiator effectiveness for a range of coolant and air flowrates. It is concluded that the most effective of the coolants in transferring heat in the test radiators was water, followed by 50/50 ethylene glycol/water, 50/50 propylene glycol/water, 70/30 ethylene glycol/water, 70/30 propylene glycol and, finally, 100% propylene glycol. There will be a negligible differences between the performance of a radiator using a 50/50 propylene glycol/water coolant and a 50/50 ethylene glycol/water coolant. It is estimated that, with 50/50 propylene glycol coolant replacing 50/50 ethylene glycol/water, the temperature of the coolant throughout the cooling loop will increase by approximately 5%. The effect that the flow regime (fully turbulent/transition/laminar) has upon the performance of a given radiator/coolant combination was found to be significant. The design of the coolant passages in radiators can affect the onset of fully turbulent flow in the coolant passages in a radiator.

  13. Ruminal fermentation of propylene glycol and glycerol.

    PubMed

    Trabue, Steven; Scoggin, Kenwood; Tjandrakusuma, Siska; Rasmussen, Mark A; Reilly, Peter J

    2007-08-22

    Bovine rumen fluid was fermented anaerobically with 25 mM R-propylene glycol, S-propylene glycol, or glycerol added. After 24 h, all of the propylene glycol enantiomers and approximately 80% of the glycerol were metabolized. Acetate, propionate, butyrate, valerate, and caproate concentrations, in decreasing order, all increased with incubation time. Addition of any of the three substrates somewhat decreased acetate formation, while addition of either propylene glycol increased propionate formation but decreased that of butyrate. R- and S-propylene glycol did not differ significantly in either their rates of disappearance or the products formed when they were added to the fermentation medium. Fermentations of rumen fluid containing propylene glycol emitted the sulfur-containing gases 1-propanethiol, 1-(methylthio)propane, methylthiirane, 2,4-dimethylthiophene, 1-(methylthio)-1-propanethiol, dipropyl disulfide, 1-(propylthio)-1-propanethiol, dipropyl trisulfide, 3,5-diethyl-1,2,4-trithiolane, 2-ethyl-1,3-dithiane, and 2,4,6-triethyl-1,3,5-trithiane. Metabolic pathways that yield each of these gases are proposed. The sulfur-containing gases produced during propylene glycol fermentation in the rumen may contribute to the toxic effects seen in cattle when high doses are administered for therapeutic purposes. PMID:17655323

  14. Supramolecular assemblies of alkane functionalized poly ethylene glycol copolymer for drug delivery

    NASA Astrophysics Data System (ADS)

    Zhu, Lida

    The therapeutic effects of many modern drugs were limited owing to their physical properties and half-life in the blood stream. The purpose of this research is to study the relationship between drug delivery performances and chemical properties of the polymer micelle drug carriers. Polyethylene glycol (PEG) based alternating copolymer poly[(polyoxyethylene)-oxy-5-hydroxyisophthalic] (Ppeg) with PEG molecular weights of 600 and 1000 were synthesized and modified with different alkanes to study the effects of altering the hydrophobic and hydrophilic chain lengths. The nuclear magnetic resonance (NMR) spectrum, critical micelle concentration (CMC), micelle size, and micelle zeta potential of the synthesized polymers were measured. The resulting polymer particles were able to form micelles in aqueous solution with CMCs lower than 0.04 wt%. Drug delivery studies were performed with a model hydrophobic drug, pyrene. Drug loading data showed the polymer particles were able to encapsulate pyrene and has a loading capacity up to 8 wt%. The sustain release ability was measured and the pyrene release was extended over 5 days. Both loading capacity and sustain release ability were found to be highly dependent on CMC. Cell culture study was implemented with RAW 264.7 cells in order to determine the polymer micelle's cytocompatibility, Most Ppeg polymer micelles showed more than 85% cell viability with and without pyrene loading. Cell internalization of the micelles encapsulated drug was measured both quantitatively and qualitatively and was enhanced comparing to unencapsulated drug. The results indicated that the internalization enhancement effect of polymer micelle was mainly affected by hydrophilic chain length; neither hydrophobic chain length nor loading capacity has significant influence on internalization.

  15. Cardiovascular effects of intravenous administration of propylene glycol and of oxytetracycline in propylene glycol in calves.

    PubMed

    Gross, D R; Kitzman, J V; Adams, H R

    1979-06-01

    Comparisons were made of the acute cardiovascular effects of oxytetracycline, oxytetracycline in propylene glycol, and propylene glycol alone given to conscious dairy calves. The calves were chronically instrumented with intravascular catheters and electromagnetic flowmeter transducers in and on the pulmonary and renal arteries. Injection (IV) of aqueous preparations of oxytetracycline produced no statistically significant (P greater than 0.05) cardiocirculatory changes in these calves. Oxytetracycline in propylene glycol and propylene glycol alone both produced transient (1 to 4 minute) periods of cardiovascular depression characterized by cardiac asystole, systemic hypotension, and decreased pulmonary and renal arterial blood flow. The two preparations, in equivalent doses and volumes, produced statistically similar hemodynamic changes in the calves. The data from this study support the conclusion that the monitored cardiovascular effects of the commercially available oxytetracycline in propylene glycol in the intact, awake calves were due to the solvent propylene glycol. This conclusion is consistent with reports of other injectable products containing the same solvent. PMID:475130

  16. Osmotic effects of polyethylene glycol.

    PubMed

    Schiller, L R; Emmett, M; Santa Ana, C A; Fordtran, J S

    1988-04-01

    Polyethylene glycol (PEG) has been used to increase the osmotic pressure of fluids used to cleanse the gastrointestinal tract. However, little is known about its osmotic activity. To investigate this activity systematically, solutions of PEG of differing molecular weights were made and subjected to measurement of osmolality by both freezing point depression and vapor pressure osmometry. Measured osmolality was increasingly greater than predicted from average molecular weight as PEG concentration increased. Measurement of sodium activity in NaCl/PEG solutions by means of an ion-selective electrode suggested that the higher than expected osmolality could be due in part to interactions that, in effect, sequestered water from the solution. Osmolality was consistently greater by freezing point osmometry than by vapor pressure osmometry. To determine which osmometry method reflected biologically relevant osmolality, normal subjects underwent steady-state total gut perfusion with an electrolyte solution containing 105 g/L of PEG 3350. This produced rectal effluent that was hypertonic by freezing point osmometry but isotonic by vapor pressure osmometry. Assuming that luminal fluid reaches osmotic equilibrium with plasma during total gut perfusion, this result suggests that the vapor pressure osmometer accurately reflects the biologically relevant osmolality of intestinal contents. We conclude that PEG exerts more of an osmotic effect than would be predicted from its molecular weight. This phenomenon may reflect interactions between PEG and water molecules that alter the physical chemistry of the solution and sequester water from the solution. PMID:3345895

  17. Low temperature specific heat of propylene glycol

    SciTech Connect

    Zhu, Da-Ming; Chen, Huiwei

    1997-01-01

    The specific heat of propylene glycol has been measured at temperatures from 0.1 K to 6 K. The magnitude and the temperature dependence of the specific heat are similar to that found in other fragile glasses.

  18. 21 CFR 172.858 - Propylene glycol alginate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Propylene glycol alginate. 172.858 Section 172.858... CONSUMPTION Multipurpose Additives § 172.858 Propylene glycol alginate. The food additive propylene glycol... information required by the act: (1) The name of the additive, “propylene glycol alginate” or...

  19. 21 CFR 172.858 - Propylene glycol alginate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Propylene glycol alginate. 172.858 Section 172.858... CONSUMPTION Multipurpose Additives § 172.858 Propylene glycol alginate. The food additive propylene glycol... information required by the act: (1) The name of the additive, “propylene glycol alginate” or...

  20. 21 CFR 172.858 - Propylene glycol alginate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Propylene glycol alginate. 172.858 Section 172.858... CONSUMPTION Multipurpose Additives § 172.858 Propylene glycol alginate. The food additive propylene glycol... information required by the act: (1) The name of the additive, “propylene glycol alginate” or...

  1. Safe antifreeze: The real difference between ethylene glycol and propylene glycol

    SciTech Connect

    Wray, T.K.

    1995-04-01

    Antifreeze-coolants are added to the radiators of internal combustion engines to prevent freezing during the winter and boil-over during the summer. Although ethylene glycol is the most commonly used coolant, products containing propylene glycol have been used--at least, experimentally--for years. Both substances have similar characteristics; however, some manufacturers claim that antifreeze-coolants containing propylene glycol are more environmentally friendly and safer to humans and animals than ethylene glycol products. This article examines these two substances, and addresses the similarities and differences of their physical and chemical compounds, thereby enabling users to determine whether such claims are valid or merely advertising hyperbole.

  2. Silicate stabilization studies in propylene glycol

    SciTech Connect

    Schwartz, S.A.

    1999-08-01

    In most North American and many European coolant formulations, the corrosion inhibition of heat-rejecting aluminum surfaces is provided by alkali metal silicates. But, their tendency towards polymerization, leading to gelation and/or precipitation, can reduce the effectiveness of a coolant. This paper presents the results of experiments which illustrate formulation-dependent behavior of inorganic silicate in propylene glycol compositions. Specific examples of the effects of glycol matrix, stabilizer type, and hard water on silicate stabilization are provided.

  3. Polyethylene glycol enhanced protein refolding.

    PubMed

    Cleland, J L; Builder, S E; Swartz, J R; Winkler, M; Chang, J Y; Wang, D I

    1992-09-01

    Previous studies on the refolding of recombinant bovine carbonic anhydrase B (CAB) indicated that polyethylene glycol (PEG) significantly enhanced the recovery of active protein by reducing aggregation. To further test the ability of PEG to enhance refolding, three recombinant human proteins, deoxyribonuclease (rhDNAse), tissue plasminogen activator (rhtPA), and interferon-gamma (rhIFN-gamma) were refolded in the presence of PEG (3350 MW). rhDNAse produced from CHO cells was denatured in 7.2 M urea and refolded by rapid dilution to 4.0 M urea and 0.20 mg/ml protein. When a final PEG to rhDNAse molar ratio of 5 to 1 (0.1 milligram PEG, 3350 MW) was used in the dilution buffer, refolding was improved by 30% to yield complete recovery of active protein. Impure E. coli derived inclusion body preparations of rhDNAse were solubilized in 8 M urea and refolded by dilution to 4 M urea and 0.10 mg/ml protein. Refolding with a dilution buffer which yielded a final PEG to rhDNAse molar ratio of 10 to 1 (0.1 milligram PEG, 3350 MW) resulted in a three-fold increase in the recovery of active protein. When PEG was used in the dilution buffer, aggregation of rhDNAse did not occur during refolding in either case. rhtPA produced from CHO cells was denatured in 5 M guanidine hydrochloride (GuHCl) and refolded by rapid dilution to 0.10 M GuHCl and 0.20 mg/ml protein.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:1368998

  4. A thermochemical approach to enhance hydrophobicity of SiC/SiO2 powder using γ-methacryloxypropyl trimethoxy silane and octylphenol polyoxyethylene ether (7)

    NASA Astrophysics Data System (ADS)

    Li, Chunxue; Feng, Dandan; Wang, Xiangke; Li, Zhihong; Zhu, Yumei

    2016-01-01

    A thermochemical synthetic methodology for silicon carbide/silica (SiC/SiO2) powder modified by integrating γ-methacryloxypropyl trimethoxy silane (KH570) and octylphenol polyoxyethylene ether (7) (OP-7) with hydrophilic SiC/SiO2 particles is described. On account of weak hydrophobicity of SiC/SiO2 powder modified by KH570 (SiC/SiO2-KH570), the study focuses on the improvement of hydrophobicity utilizing alkylation reaction between OP-7 and KH570 at high temperature. Compared with using KH570 alone, SiC/SiO2 powder modified by KH570 and OP-7 (SiC/SiO2-KH570-OP-7) shows better water resistance, and also an increased contact angle from 73.8° to 136.4°, resulting thus an improved hydrophobicity. Fourier transform infrared spectroscopy (FTIR), as well as X-ray photoelectron spectroscopy (XPS), was utilized to characterize these surfaces, and the results indicated that KH570 and OP-7 can be covalently bonded on the surface of SiC/SiO2 powder. Furthermore, it has been deeply investigated in the paper not only the possible modes of non-oxidative thermal degradation of OP-7 and KH570, but also the formation mechanism of more hydrophobic SiC/SiO2-KH570-OP-7 powder, which probably will have a potential utility for other inorganic materials.

  5. Study on the catalytic performance of laccase in the hydrophobic ionic liquid-based bicontinuous microemulsion stabilized by polyoxyethylene-type nonionic surfactants.

    PubMed

    Yu, Xinxin; Li, Qian; Wang, Miaomiao; Du, Na; Huang, Xirong

    2016-02-14

    To formulate a compatible green medium for the conversion of a hydrophobic substrate by a hydrophilic enzyme, we investigated the phase behavior of pseudo ternary hydrophobic ionic liquid (HIL)/buffer/polyoxyethylene-type nonionic surfactant (CnEm)/n-alcohol system and the effects of the components on the formulation of the HIL-based bicontinuous microemulsion. It is found that small head group of the surfactant, high concentration of n-alcohol (medium/long alkyl chain) and low cohesive energy density of the HIL result in low phase transition temperature. In the CnEm stabilized compatible bicontinuous microemulsion, the kinetics of laccase catalyzed oxidation of 2,6-dimethoxyphenol were also investigated. It is found that in addition to temperature, n-alcohol is the key parameter affecting the catalytic performance of laccase, and the optimum n-alcohol depends on the type of HIL as an oil phase. All the kinetic parameters, such as Km, kcat, kcat/Km, and Ea (apparent activation energy), indicate that the bicontinuous microemulsion consisting of [Omim]NTf2/buffer/CnEm/n-hexanol is a suitable medium for the laccase-catalyzed reaction. To the best of our knowledge, this is the first report on the formulation of HIL-based bicontinuous microemulsion for enzyme catalysis. PMID:26686358

  6. Interface-engineering additives of poly(oxyethylene tridecyl ether) for low-band gap polymer solar cells consisting of PCDTBT:PCBM₇₀ bulk-heterojunction layers.

    PubMed

    Huh, Yoon Ho; Park, Byoungchoo

    2013-01-14

    We herein report on the improved photovoltaic (PV) effects of using a polymer bulk-heterojunction (BHJ) layer that consists of a low-band gap electron donor polymer of poly(N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)) (PCDTBT) and an acceptor of [6,6]-phenyl C₇₁ butyric acid methyl ester (PCBM₇₀), doped with an interface-engineering surfactant additive of poly(oxyethylene tridecyl ether) (PTE). The presence of an interface-engineering additive in the PV layer results in excellent performance; the addition of PTE to a PCDTBT:PCBM₇₀ system produces a power conversion efficiency (PCE) of 6.0%, which is much higher than that of a reference device without the additive (4.9%). We attribute this improvement to an increased charge carrier lifetime, which is likely to be the result of the presence of PTE molecules oriented at the interfaces between the BHJ PV layer and the anode and cathode, as well as at the interfaces between the phase-separated BHJ domains. Our results suggest that the incorporation of the PTE interface-engineering additive in the PCDTBT:PCBM₇₀ PV layer results in a functional composite system that shows considerable promise for use in efficient polymer BHJ PV cells. PMID:23389265

  7. Characterization of polyoxyethylene tallow amine surfactants in technical mixtures and glyphosate formulations using ultra-high performance liquid chromatography and triple quadrupole mass spectrometry

    USGS Publications Warehouse

    Tush, Daniel; Loftin, Keith A.; Meyer, Michael T.

    2013-01-01

    Little is known about the occurrence, fate, and effects of the ancillary additives in pesticide formulations. Polyoxyethylene tallow amine (POEA) is a non-ionic surfactant used in many glyphosate formulations, a widely applied herbicide both in agricultural and urban environments. POEA has not been previously well characterized, but has been shown to be toxic to various aquatic organisms. Characterization of technical mixtures using ultra-high performance liquid chromatography (UHPLC) and mass spectrometry shows POEA is a complex combination of homologs of different aliphatic moieties and ranges of ethoxylate units. Tandem mass spectrometry experiments indicate that POEA homologs generate no product ions readily suitable for quantitative analysis due to poor sensitivity. A comparison of multiple high performance liquid chromatography (HPLC) and UHPLC analytical columns indicates that the stationary phase is more important in column selection than other parameters for the separation of POEA. Analysis of several agricultural and household glyphosate formulations confirms that POEA is a common ingredient but ethoxylate distributions among formulations vary.

  8. Polyoxyethylene Tallow Amine, a Glyphosate Formulation Adjuvant: Soil Adsorption Characteristics, Degradation Profile, and Occurrence on Selected Soils from Agricultural Fields in Iowa, Illinois, Indiana, Kansas, Mississippi, and Missouri.

    PubMed

    Tush, Daniel; Meyer, Michael T

    2016-06-01

    Polyoxyethylene tallow amine (POEA) is an inert ingredient added to formulations of glyphosate, the most widely applied agricultural herbicide. POEA has been shown to have toxic effects to some aquatic organisms making the potential transport of POEA from the application site into the environment an important concern. This study characterized the adsorption of POEA to soils and assessed its occurrence and homologue distribution in agricultural soils from six states. Adsorption experiments of POEA to selected soils showed that POEA adsorbed much stronger than glyphosate; calcium chloride increased the binding of POEA; and the binding of POEA was stronger in low pH conditions. POEA was detected on a soil sample from an agricultural field near Lawrence, Kansas, but with a loss of homologues that contain alkenes. POEA was also detected on soil samples collected between February and early March from corn and soybean fields from ten different sites in five other states (Iowa, Illinois, Indiana, Missouri, Mississippi). This is the first study to characterize the adsorption of POEA to soil, the potential widespread occurrence of POEA on agricultural soils, and the persistence of the POEA homologues on agricultural soils into the following growing season. PMID:27163278

  9. The migration of propylene glycol, mono-, di-, and triethylene glycols from regenerated cellulose film into food.

    PubMed

    Castle, L; Cloke, H R; Crews, C; Gilbert, J

    1988-11-01

    Chocolates, boiled sweets, toffees, cakes and meat pies were wrapped in regenerated cellulose films (with or without coatings) that contained various mixtures of glycol softeners and which had been specially formulated for particular food applications. Samples were unwrapped at intervals (up to the end of the usual maximum shelf-life for the food) and analysed for their glycol content. Analysis involved homogenization of the food in hot water, removal of fats with hexane, precipitation of sugars with calcium hydroxide and analysis of the glycols by capillary gas chromatography with flame ionization detection (GC/FID) after trimethylsilyl (TMS) derivatization. Triethylene glycol was analysed by selected ion monitoring GC/mass spectrometry (GC/MS) as interference problems occurred with the GC/FID approach. The results of the study showed that higher levels of migration occurred for propylene glycol than for triethylene glycol and the presence of a coating reduced the migration of both softeners. Generally, mono- and diethylene glycol levels in the food samples were below 10 mg/kg, although some samples wrapped in polyethylene glycol-softened films contained levels approaching the current statutory limit of 50 mg/kg. PMID:3206944

  10. Diethylene glycol poisoning from transcutaneous absorption.

    PubMed

    Devoti, Elisabetta; Marta, Elisabetta; Belotti, Elena; Bregoli, Laura; Liut, Francesca; Maiorca, Paolo; Mazzucotelli, Valentina; Cancarini, Giovanni

    2015-04-01

    A case of transcutaneous diethylene glycol poisoning with severe acute kidney injury, but a positive outcome, is described. A man without significant medical history was admitted to our hospital due to anuria, gastrointestinal symptoms, and hypertension. Ultrasonography excluded vascular damage and postrenal obstruction. Laboratory tests showed acute kidney injury and metabolic acidosis with increased anion gap; hemodialysis therapy was started. The brother of the patient reported that the patient had been smearing his skin with brake fluid containing diethylene glycol to treat a "dermatitis." Only supportive therapy was given due to the lack of a specific antidote. Continuous venovenous hemofiltration was performed. The kidney biopsy showed acute toxic proximal tubulonecrosis, without deposition of oxalate crystals. His neurologic condition worsened dramatically; supportive care was continued. Over time, acute kidney injury and neurologic damage gradually improved; 33 days after admission, he went to a rehabilitation unit for 5 months, with complete clinical recovery. Historically, diethylene glycol has been the cause of large-scale poisonings from ingestion of contaminated drugs. The clinical evolution is unpredictable. Treatment is not well defined; early hemodialysis treatment reduces levels of toxic metabolites, and fomepizole could be useful in cases with an early diagnosis. A comparison of the characteristics of diethylene glycol versus ethylene glycol poisoning is given. PMID:25445099

  11. Polymeric compositions incorporating polyethylene glycol as a phase change material

    DOEpatents

    Salyer, Ival O.; Griffen, Charles W.

    1989-01-01

    A polymeric composition comprising a polymeric material and polyethylene glycol or end-capped polyethylene glycol as a phase change material, said polyethylene glycol and said end-capped polyethylene glycol having a molecular weight greater than about 400 and a heat of fusion greater than about 30 cal/g; the composition is useful in making molded and/or coated materials such as flooring, tiles, wall panels and the like; paints containing polyethylene glycols or end-capped polyethylene glycols are also disclosed.

  12. Science and the perceived environmental risk from ethylene glycol and propylene glycol

    SciTech Connect

    Snellings, W.M.; Shah, S.I.; Garska, D.; Williams, J.B.

    1994-12-31

    Ethylene glycol and propylene glycol are widely used in aircraft deicing fluids (ADF), heat transfer fluids, and engine coolants. Discharges of these compounds to the environment have been reduced in recent years, but remain significant. The perceived environmental risk affects the decisions of businesses and regulatory agencies. There is a perception that propylene glycol poses a lower environmental risk than ethylene glycol. This perception is an inference from the use of low concentrations of propylene glycol in food additives -- something safe for food must be safe for fish. Environmental risk, however, must be established on the basis of scientific data, including acute and chronic toxicity to freshwater and saltwater species, oxygen demand, and persistence. A review of aquatic toxicity data for marine and freshwater species, and a review of treatability data in wastewater and soil for these widely used compounds has been completed. The data show that the two compounds, in fact, pose similar environmental risks, and in certain aspects one or the other glycol appears to be preferable. All aspects must be considered to give a valid perception of risk. The role of additives in deicing fluids is significant. Environmental fate and effect data indicate that additives are usually more toxic than the glycols, and environmental data for particular formulations must be evaluated as part of any risk assessment.

  13. Safety assessment of propylene glycol, tripropylene glycol, and PPGs as used in cosmetics.

    PubMed

    Fiume, Monice M; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2012-01-01

    Propylene glycol is an aliphatic alcohol that functions as a skin conditioning agent, viscosity decreasing agent, solvent, and fragrance ingredient in cosmetics. Tripropylene glycol functions as a humectant, antioxidant, and emulsion stabilizer. Polypropylene glycols (PPGs), including PPG-3, PPG-7, PPG-9, PPG-12, PPG-13, PPG-15, PPG-16, PPG-17, PPG-20, PPG-26, PPG-30, PPG-33, PPG-34, PPG-51, PPG-52, and PPG-69, function primarily as skin conditioning agents, with some solvent use. The majority of the safety and toxicity information presented is for propylene glycol (PG). Propylene glycol is generally nontoxic and is noncarcinogenic. Clinical studies demonstrated an absence of dermal sensitization at use concentrations, although concerns about irritation remained. The CIR Expert Panel determined that the available information support the safety of tripropylene glycol as well as all the PPGs. The Expert Panel concluded that PG, tripropylene glycol, and PPGs ≥3 are safe as used in cosmetic formulations when formulated to be nonirritating. PMID:23064775

  14. Transport and metabolism of glycolic acid by Chlamydomonas reinhardtii

    SciTech Connect

    Wilson, B.J.

    1987-01-01

    In order to understand the excretion of glycolate from Chlamydomonas reinhardtii, the conditions affecting glycolate synthesis and metabolism were investigated. Although glycolate is synthesized only in the light, the metabolism occurs in the light and dark with greater metabolism in the light due to refixation of photorespiratory CO/sub 2/. The amount of internal glycolate will affect the metabolism of externally added glycolate. When glycolate synthesis exceeds the metabolic capacity, glycolate is excreted from the cell. The transport of glycolate into the cells occurs very rapidly. Equilibrium is achieved at 4/sup 0/C within the time cells are pelleted by the silicone oil centrifugation technique through a layer of (/sup 14/C) glycolate. Glycolate uptake does not show the same time, temperature and pH dependencies as diffusion of benzoate. Uptake can be inhibited by treatment of cells with N-ethylmaleimide and stimulated in the presence of valino-mycin/KCl. Acetate and lactate are taken up as quickly as glycolate. The hypothesis was made that glycolate is transported by a protein carrier that transports monocarboxylic acids. The equilibrium concentration of glycolate is dependent on the cell density, implying that there may be a large number of transporter sites and that uptake is limited by substrate availability.

  15. Polyethylene glycol-electrolyte solution (PEG-ES)

    MedlinePlus

    Polyethylene glycol-electrolyte solution (PEG-ES) is used to empty the colon (large intestine, bowel) before a ... Polyethylene glycol-electrolyte solution (PEG-ES) comes as a powder to mix with water and take by ...

  16. [Interference of ethylene glycol on lactate assays].

    PubMed

    Graïne, H; Toumi, K; Roullier, V; Capeau, J; Lefèvre, G

    2007-01-01

    Ethylene glycol is broken down to three main organic acids: glycolic acid, glyoxylic acid and oxalic acid which cause severe metabolic acidosis. Effect of these three acids on lactate assays was evaluated in five blood gas analysers and two clinical chemistry analysers. For all systems, no influence of oxalic acid on lactate results could be demonstrated. No interference of glycolic acid could be observed on lactate assay performed with Rapid Lab 1265 (R: 104,9 +/- 12,1%), Vitros 950 (R: 105,7 +/- 5,3 %) and Architect ci8200 (R: 104,9 +/- 4,7%), but on the contrary, CCX 4, OMNI S, ABL 725 and 825 demonstrated a concentration-dependent interference. No interference of glyoxylic acid could be observed with Vitros 950, but a positive interference could be observed with ABL 725 and 825, OMNI S, CCX4 and Architect ci8200 A linear relationship between apparent lactate concentration found with ABL 725 and 825, OMNI S, CCX 4, and glyoxylic acid could be observed (0,94 < r < 0,99), a weaker interference being observed with Rapid Lab 1265 and Architect ci 8200. Our results demonstrated that in case of ethylene glycol poisoning, cautious interpretation of lactate assay should be done, since wrong results of lactacidemia could lead to misdiagnostic and delay patient treatment. PMID:17627925

  17. Ethylene glycol monobutyl ether (EGBE) (2-Butoxyethanol)

    Integrated Risk Information System (IRIS)

    Ethylene glycol monobutyl ether ( EGBE ) ( 2 - Butoxyethanol ) ; CASRN 111 - 76 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I (

  18. 21 CFR 184.1666 - Propylene glycol.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Propylene glycol. 184.1666 Section 184.1666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  19. Novel biotreatment process for glycol waters

    SciTech Connect

    Raja, L.M.V.; Elamvaluthy, G.; Palaniappan, R.; Krishnan, R.M.

    1991-12-31

    Propylene oxide (PO), propylene glycol (PG), and polyols are produced from propylene via propylene chlorohydrin. Effluents from these plants contain biological oxygen demand/chemical oxygen demand (BOD/COD) loads besides high chloride concentrations. The high salinity poses severe problem to adopt conventional methods like activated sludge processes. Presently, a simple, economically viable and versatile microbiological process has been developed to get more than 90% biodegradation in terms of BOD/COD, utilizing specially developed Pseudomonas and Aerobacter. The process can tolerate high salinity up to 10 wt% NaCl or 5 wt% CaCl{sub 2} and can withstand wide variations in pH (5.5-11.0) and temperature (15-45{degrees}C). The biodegradation of glycols involves two steps. The enzymatic conversion of glycols to carboxylic and hydroxycarboxylic acids is aided by Pseudoomonas. Further degradation to CO{sub 2} and H{sub 2}O by carboxylic acid utilizing Aerobacter, and possible metabolic degradative pathway of glycols are discussed. Various process parameters obtained in the lab scale (50 L bioreactor) and pilot scale (20 m{sup 3} bioreactor), and unique features of our process are also discussed.

  20. 21 CFR 184.1666 - Propylene glycol.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Propylene glycol. 184.1666 Section 184.1666 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  1. Review of glycol ether and glycol ether ester solvents used in the coating industry.

    PubMed Central

    Smith, R L

    1984-01-01

    Ethylene oxide-based glycol ether and glycol ether ester solvents have been used in the coatings industry for the past fifty years. Because of their excellent performance properties (evaporation rate, blush resistance, flow-out and leveling properties, solubility for coating resins, solvent activity, mild odor, good coupling ability, good solvent release) a complete line of ethylene oxide-based solvents of various molecular weights has been developed. These glycol ether and glycol ether ester solvents have better solvent activity for coating resin than ester or ketone solvents in their evaporation rate range. The gloss, flow and leveling, and general performance properties of many coating systems are dependent on the use of these products in the coating formula. Because of the concern about the toxicity of certain ethylene oxide-based solvents, other products are being evaluated as replacements in coating formulas. PMID:6499793

  2. 40 CFR 721.3550 - Dipropylene glycol dimethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Dipropylene glycol dimethyl ether. 721... Substances § 721.3550 Dipropylene glycol dimethyl ether. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified as dipropylene glycol dimethyl ether (PMN...

  3. 40 CFR 721.3550 - Dipropylene glycol dimethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dipropylene glycol dimethyl ether. 721... Substances § 721.3550 Dipropylene glycol dimethyl ether. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified as dipropylene glycol dimethyl ether (PMN...

  4. 21 CFR 178.3760 - Polyethylene glycol (400) monolaurate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Polyethylene glycol (400) monolaurate. 178.3760... SANITIZERS Certain Adjuvants and Production Aids § 178.3760 Polyethylene glycol (400) monolaurate. Polyethylene glycol (400) monolaurate containing not more than 0.1 percent by weight of ethylene...

  5. 21 CFR 178.3760 - Polyethylene glycol (400) monolaurate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Polyethylene glycol (400) monolaurate. 178.3760 Section 178.3760 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Production Aids § 178.3760 Polyethylene glycol (400) monolaurate. Polyethylene glycol (400)...

  6. 21 CFR 178.3760 - Polyethylene glycol (400) monolaurate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Polyethylene glycol (400) monolaurate. 178.3760... SANITIZERS Certain Adjuvants and Production Aids § 178.3760 Polyethylene glycol (400) monolaurate. Polyethylene glycol (400) monolaurate containing not more than 0.1 percent by weight of ethylene...

  7. 21 CFR 178.3760 - Polyethylene glycol (400) monolaurate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Polyethylene glycol (400) monolaurate. 178.3760... SANITIZERS Certain Adjuvants and Production Aids § 178.3760 Polyethylene glycol (400) monolaurate. Polyethylene glycol (400) monolaurate containing not more than 0.1 percent by weight of ethylene...

  8. Thymine glycol and thymidine glycol in human and rat urine: a possible assay for oxidative DNA damage

    SciTech Connect

    Cathcart, R.; Schwiers, E.; Saul, R.L.; Ames, B.N.

    1984-09-01

    Thymine glycol is a DNA damage product of ionizing radiation and other oxidative mutagens. In an attempt to find a noninvasive assay for oxidative DNA damage in individuals, we have developed an HPLC assay for free thymine glycol and thymidine glycol in urine. Our results indicate that humans excrete about 32 nmol of the two glycols per day. Rats, which have a higher specific metabolic rate and a shorter life span, excrete about 15 times more thymine glycol plus thymidine glycol per kg of body weight than do humans. We present evidence that thymine glycol and thymidine glycol are likely to be derived from repair of oxidized DNA, rather than from alternative sources such as the diet or bacterial flora. This noninvasive assay of DNA oxidation products may allow the direct testing of current theories which relate oxidative metabolism to the processes of aging and cancer in man. 33 references, 2 figures, 3 tables.

  9. Indoor air guide values for glycol ethers and glycol esters-A category approach.

    PubMed

    Mangelsdorf, Inge; Kleppe, Sara Nordqvist; Heinzow, Birger; Sagunski, Helmut

    2016-07-01

    The German Committee on Indoor Guide Values issues indoor air guide values to protect public health. For health evaluation of glycol ethers and glycol esters in air, the entire group of substances with data for 47 chemicals was analyzed in order to gain a consistent assessment. For some glycol ethers reproductive and hematological effects are of central interest, whereas for others effects on liver and kidneys are crucial. Moreover, some glycol ethers have also been shown to cause irritation of the respiratory tract. For 14 chemicals, suitable inhalation studies were available for deriving specific guide values, or analogies to closely related substances could be drawn. For these chemicals individual indoor air guide values were derived, the respective guide value I ranging from 0.02 to 2mg/m(3). Guide values were derived according to the procedures issued by the Committee, considering the exposure duration in indoor air compared to animal studies or the situation at workplaces, the duration of the respective study, species differences, and interindividual variability including special sensitivity of children. For glycol ethers with insufficient data default guide values II and I of 0.05 and 0.005ppm, respectively, were recommended based on statistical analyses of the available data on all glycol ethers and on evaluation of single studies. For evaluation of combined effects additivity is assumed. PMID:27157117

  10. Effects of low temperature on the biodegradation of ethylene glycol and propylene glycol

    SciTech Connect

    Williams, J.B.; Blessing, R.L.

    1995-12-31

    Ethylene glycol and propylene glycol are used in a variety of applications. These compounds are well known to biodegrade readily at 20 C, which is the benchmark temperature for most biodegradation studies. These compounds may enter the environment when the ambient temperatures are significantly below 20 C. Biodegradation data at low temperatures was needed. For example, wintertime airport stormwater discharges contain glycols from deicing fluids. These compounds may enter streams at ambient winter temperatures, or wastewater treatment works which may be operating at temperatures well below 20 C. Biodegradation studies were conducted with BOD bottles incubated at 40 C and 10 C. Biodegradation was slower than 20 C but still significant. For ethylene glycol, the half-life (time at which one-half of the oxygen demand was consumed by the microorganisms) was 5 days at 20 C, 8 days at 10 C, and 25 days at 40 C. For propylene glycol, the half-life was 5 days at 20 C, 12 days at 10 C, and 28 days at 40 C. Two aircraft deicing fluids were also tested, and similar degradation rates were observed. This indicates the presence of additives in deicing fluids has little effect on biodegradation of glycols.

  11. Dissipation of a commercial mixture of polyoxyethylene amine surfactants in aquatic outdoor microcosms: Effect of water depth and sediment organic carbon.

    PubMed

    Rodriguez-Gil, Jose Luis; Lissemore, Linda; Solomon, Keith; Hanson, Mark

    2016-04-15

    This study optimized existing analytical approaches and characterized the effect of sediment total organic carbon (0.05-2.05% TOC), and water depth (15, 30, and 90cm) on the fate of MON 0818, a commercial mixture of polyoxyethylene amine surfactants (POEAs), in outdoor microcosms. Mixtures of POEAs are commonly used as adjuvants in commercial herbicide formulations containing glyphosate. Until recently, analytical methods sensitive enough to monitor environmental concentrations of POEAs in aquatic systems were not available. After optimizing recently developed analytical methods, we found that the combined use of accelerated solvent extraction (ASE) and liquid chromatography-tandem mass spectrometry provided a reliable approach for determining the concentration of sediment-adsorbed POEAs. The surfactant showed strong affinity for sediment materials, with low maximum recoveries by ASE of 52%. Under microcosm conditions, water depth or sediment characteristics did not significantly affect the water-column half-life of POEA, which ranged from 3.2 to 5.3h. Binding of POEAs to suspended solids was observed, which dissipated via one- or two-phase exponential decay; when two-phase decay occurred, fast phase half-life values ranged from 0.71 to 1.3h and slow-phase values ranged from 18 to 44h. Concentrations of POEA increased in sediment shortly after application and decreased over the study period with a half-life of 5.8 to 71d. The concentrations of POEAs in the sediment of the shallow (15cm) ponds dissipated following a two-phase exponential decay model with an initial fast-phase half-life of 1.1 to 8.9d and a slower second-phase half-life of 21d. Our results suggest that aquatic organisms are unlikely to be exposed to POEAs in aqueous phase for periods of more than a few hours following an over-water application, and that sediment is a significant sink for POEAs in aquatic systems. PMID:26845181

  12. Certain glycol ethers eliminated from toxic chemical release reporting requirements

    SciTech Connect

    1994-09-01

    Effective June 28, 1994, the U.S. Environmental Protection Agency (EPA) eliminated high molecular weight glycol ethers from the reporting requirements of section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 (EPCRA). EPCRA (42 U.S.C. 11023) is also referred to as Title III of the Superfund Amendments and Reauthorization Act (SARA) of 1986. EPA redefined the glycol ethers category list of chemicals subject to reporting based on an EPA review of available human health data on short-chain glycol ethers. EPA is removing only the surfactant glycol ethers, which are high molecular weight glycol ethers, i.e., those with pendant alkyl groups and that typically have eight or more carbon atoms. The redefinition retains certain glycol ethers (i.e., ethylene glycol ethers where there are 1,2, or 3 repeating ethylene oxide groups) in the category. These are reasonably anticipated to cause adverse human health effects.

  13. Quantum dot/glycol chitosan fluorescent nanoconjugates

    NASA Astrophysics Data System (ADS)

    Mansur, Alexandra AP; Mansur, Herman S.

    2015-04-01

    In this study, novel carbohydrate-based nanoconjugates combining chemically modified chitosan with semiconductor quantum dots (QDs) were designed and synthesised via single-step aqueous route at room temperature. Glycol chitosan (G-CHI) was used as the capping ligand aiming to improve the water solubility of the nanoconjugates to produce stable and biocompatible colloidal systems. UV-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, and Fourier transform infrared (FTIR) spectroscopy were used to characterise the synthesis and the relative stability of biopolymer-capped semiconductor nanocrystals. The results clearly demonstrated that the glycol chitosan derivative was remarkably effective at nucleating and stabilising semiconductor CdS quantum dots in aqueous suspensions under acidic, neutral, and alkaline media with an average size of approximately 2.5 nm and a fluorescent activity in the visible range of the spectra.

  14. Dielectric secondary relaxations in polypropylene glycols.

    PubMed

    Grzybowska, K; Grzybowski, A; Zioło, J; Paluch, M; Capaccioli, S

    2006-07-28

    Broadband dielectric measurements of polypropylene glycol of molecular weight M(w)=400 g / mol (PPG 400) were carried out at ambient pressure over the wide temperature range from 123 to 353 K. Three relaxation processes were observed. Besides the structural alpha relaxation, two secondary relaxations, beta and gamma, were found. The beta process was identified as the true Johari-Goldstein relaxation by using a criterion based on the coupling model prediction. The faster gamma relaxation, well separated from the primary process, undoubtedly exhibits the anomalous behavior near the glass transition temperature (T(g)) which is reflected in the presence of a minimum of the temperature dependence of the gamma-relaxation time. We successfully applied the minimal model [Dyre and Olsen, Phys. Rev. Lett. 91, 155703 (2003)] to describe the entire temperature dependence of the gamma-relaxation time. The asymmetric double-well potential parameters obtained by Dyre and Olsen for the secondary relaxation of tripropylene glycol at ambient pressure were modified by fitting to the minimal model at lower temperatures. Moreover, we showed that the effect of the molecular weight of polypropylene glycol on the minimal model parameters is significantly larger than that of the high pressure. Such results can be explained by the smaller degree of hydrogen bonds formed by longer chain molecules of PPG at ambient pressure than that created by shorter chains of PPG at high pressure. PMID:16942189

  15. Glycolic acid peel therapy - a current review.

    PubMed

    Sharad, Jaishree

    2013-01-01

    Chemical peels have been time-tested and are here to stay. Alpha-hydroxy peels are highly popular in the dermatologist's arsenal of procedures. Glycolic acid peel is the most common alpha-hydroxy acid peel, also known as fruit peel. It is simple, inexpensive, and has no downtime. This review talks about various studies of glycolic acid peels for various indications, such as acne, acne scars, melasma, postinflammatory hyperpigmentation, photoaging, and seborrhea. Combination therapies and treatment procedure are also discussed. Careful review of medical history, examination of the skin, and pre-peel priming of skin are important before every peel. Proper patient selection, peel timing, and neutralization on-time will ensure good results, with no side effects. Depth of the glycolic acid peel depends on the concentration of the acid used, the number of coats applied, and the time for which it is applied. Hence, it can be used as a very superficial peel, or even a medium depth peel. It has been found to be very safe with Fitzpatrick skin types I-IV. All in all, it is a peel that is here to stay. PMID:24399880

  16. Biodegradation of glycol ethers in soil

    SciTech Connect

    Gonsior, S.J.; West, R.J.

    1995-08-01

    Because of the widespread use of glycol ethers in applications ranging from consumer products to use as chemical intermediates, there is a need to better understand the fate of these compounds in the environment. Soil biodegradation studies were conducted for three propylene glycol ethers: 1-methoxy-2-propanol, 1-phenoxy-2-propanol, and 1-methoxy-2-propanol acetate. The test compounds were labeled with carbon-14 at either the methoxy or phenoxy substituents. Biodegradation of the three compounds was observed in two sandy loam soils. The time required for disappearance of 50% of the test compounds ranged from < 1 d at 0.2 ppm (w/w) to <7 d at 107 ppm. Degradation rates were slower in a sandy soil, reflecting the lower concentration of microorganisms present. No significant accumulation of intermediate products was observed, and ultimate yields of {sup 14}CO{sub 2} were in the range of 40 to 65% of the initial concentration. Results indicated that the glycol ethers were degraded in a variety of soils under aerobic conditions.

  17. Relative toxicities of formulated glycol aircraft deicers and pure glycol products to duckweed (Lemna minor)

    SciTech Connect

    DuFresne, D.L.; Pillard, D.A.

    1995-12-31

    Ethylene and propylene glycol deicers are commonly used at airports in the US and other countries to both remove snow and ice from aircraft, and to retard the accumulation of those materials. Snow and ice often pile up at airports during the winter and are then flushed into the storm sewer system during warmer temperatures or rainfall. Some of this water containing deicers may enter waterbodies without prior treatment, While previous studies have investigated the effects of deicers on aquatic animals and algae, data are not available on the effects on aquatic macrophytes, Glycol deicers were obtained in the formulated mixtures used on aircraft; pure ethylene and propylene glycol were obtained from Sigma{reg_sign}. Duckweed (Lemna minor) fronds were exposed to various concentrations of pure and formulated glycol mixtures. The number of fronds at test termination and chlorophyll concentration (measured using a spectrophotometer) were the measured endpoints. Based upon glycol concentration, the formulated products were more toxic than the pure material. These results are consistent with results seen in other animal and plant studies.

  18. Complete Genome Sequence of Polypropylene Glycol- and Polyethylene Glycol-Degrading Sphingopyxis macrogoltabida Strain EY-1

    PubMed Central

    Nagata, Yuji; Numata, Mitsuru; Tsuchikane, Kieko; Hosoyama, Akira; Yamazoe, Atsushi; Tsuda, Masataka; Fujita, Nobuyuki; Kawai, Fusako

    2015-01-01

    Strain EY-1 was isolated from a microbial consortium growing on a random polymer of ethylene oxide and propylene oxide. Strain EY-1 grew on polyethylene glycol and polypropylene glycol and identified as Sphingopyxis macrogoltabida. Here, we report the complete genome sequence of Sphingopyxis macrogoltabida EY-1. The genome of strain EY-1 is comprised of a 4.76-Mb circular chromosome, and five plasmids. The whole finishing was conducted in silico, with aids of computational tools GenoFinisher and AceFileViewer. Strain EY-1 is available from Biological Resource Center, National Institute of Technology and Evaluation (Tokyo, Japan) (NITE). PMID:26634754

  19. 21 CFR 573.225 - 1,3-Butylene glycol.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.225 1,3-Butylene glycol. The food additive 1,3-butylene glycol (1,3-butanediol) may... 21 Food and Drugs 6 2010-04-01 2010-04-01 false 1,3-Butylene glycol. 573.225 Section 573.225...

  20. 21 CFR 573.225 - 1,3-Butylene glycol.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.225 1,3-Butylene glycol. The food additive 1,3-butylene glycol (1,3-butanediol) may... 21 Food and Drugs 6 2011-04-01 2011-04-01 false 1,3-Butylene glycol. 573.225 Section 573.225...

  1. 21 CFR 573.225 - 1,3-Butylene glycol.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.225 1,3-Butylene glycol. The food additive 1,3-butylene glycol (1,3-butanediol) may... 21 Food and Drugs 6 2012-04-01 2012-04-01 false 1,3-Butylene glycol. 573.225 Section 573.225...

  2. Diethylene glycol poisoning in Nigerian children.

    PubMed

    Okuonghae, H O; Ighogboja, I S; Lawson, J O; Nwana, E J

    1992-01-01

    Between June and September 1990, 47 children died at Jos University Teaching Hospital, Nigeria from ingestion of paracetamol syrup adulterated with diethylene glycol. Most of the children presented with anuria, fever, vomiting, diarrhoea and convulsions. Signs on admission were tachycardia, acidotic breathing, pallor, oedema and hepatomegaly. Laboratory findings included hyperkalaemia, acidosis, elevated creatinine level and hypoglycaemia. Management consisted of correction of dehydration and acidosis plus administration of antibiotics when indicated. None of the children had dialysis. All died within 2 weeks of admission. Proper government supervision of pharmaceutical companies and their agencies is urgently needed in order to prevent any future occurrence of such tragic deaths. PMID:1280035

  3. Characterization of Polyethylene Glycol Modified Hemoglobins

    NASA Astrophysics Data System (ADS)

    Salazar, Gil; Barr, James; Morgan, Wayne; Ma, Li

    2011-03-01

    Polyethylene glycol modified hemoglobins (PEGHbs) was characterized by liquid chromatography and fluorescence methods. We prepared four samples of two different molecular weight PEG, 5KDa and 20KDa, modified bovine and human hemoglobin. We studied the oxygen affinities, stabilities, and peroxidase activities of PEGHbs. We have related oxygen affinities with different degrees of modifications. The data showed that the modification on the beta subunits was less stable than that of the alpha subunits on the human Hb based samples especially. We also compared peroxidase activities among different modified PEGHbs.

  4. Radioprotection by polyethylene glycol-protein complexes in mice

    SciTech Connect

    Gray, B.H.; Stull, R.W.

    1983-03-01

    Polyethylene glycol of about 5000 D was activated with cyanuric chloride, and the activated compound was complexed to each of three proteins. Polyethylene glycol-superoxide dismutase and polyethylene glycol-catalase were each radioprotectants when administered prophylactically to female B6CBF1 mice before irradiation. The dose reduction factor for these mice was 1.2 when 5000 units of polyethylene glycol-catalase was administered before /sup 60/Co irradiation. Female B6CBF1 mice administered prophylactic intravenous injections of catalase, polyethylene glycol-albumin, or heat-denatured polyethylene glycol-catalase had survival rates similar to phosphate-buffered saline-injected control mice following /sup 60/Co irradiation. Polyethylene glycol-superoxide dismutase and polyethylene glycol-catalase have radioprotective activity in B6CBF1 mice, which appears to depend in part on enzymatic activities of the complex. However, no radioprotective effect was observed in male C57BL/6 mice injected with each polyethylene glycol-protein complex at either 3 or 24 hr before irradiation. The mechanism for radioprotection by these complexes may depend in part on other factors.

  5. The effect of glycerol, propylene glycol and polyethylene glycol 400 on the partition coefficient of benzophenone-3 (oxybenzone).

    PubMed

    Mbah, C J

    2007-01-01

    Sunscreen products are widely used to protect the skin from sun-related deleterious effects. The objective of the study was to investigate the potential effect of glycerol, propylene glycol and polyethylene glycol 400 on dermal absorption of oxybenzone by studying their effects on its partition coefficient. The partition coefficient was evaluated in a chloroform-water system at room temperature. It was found that glycerol and propylene glycol decreased the partition coefficient of oxybenzone, while an increase in partition coefficient was observed with polyethylene glycol 400. The findings suggest that polyethylene glycol 400 in contrast to glycerol and propylene glycol has the potential of increasing the vehicle-skin partition coefficient of oxybenzone when cosmetic products containing such an UV absorber are topically applied to the skin. PMID:17294811

  6. Characterization of tetraethylene glycol passivated iron nanoparticles

    NASA Astrophysics Data System (ADS)

    Nunes, Eloiza da Silva; Viali, Wesley Renato; da Silva, Sebastião William; Coaquira, José Antonio Huamaní; Garg, Vijayendra Kumar; de Oliveira, Aderbal Carlos; Morais, Paulo César; Jafelicci Júnior, Miguel

    2014-10-01

    The present study describes the synthesis and characterization of iron@iron oxide nanoparticles produced by passivation of metallic iron in tetraethylene glycol media. Structural and chemical characterizations were performed using transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Mössbauer spectroscopy. Pomegranate-like core@shell nanoparticulate material in the size range of 90-120 nm was obtained. According to quantitative phase analysis using Rietveld structure refinement the synthesized iron oxide was identified as magnetite (Fe3O4) whereas the iron to magnetite mass fractions was found to be 47:53. These findings are in good agreement with the data obtained from Mössbauer and thermal gravimetric analysis (TGA). The XPS data revealed the presence of a surface organic layer with higher hydrocarbon content, possibly due to the tetraethylene glycol thermal degradation correlated with iron oxidation. The room-temperature (300 K) saturation magnetization measured for the as-synthesized iron and for the iron-iron oxide were 145 emu g-1 and 131 emu g-1, respectively. The measured saturation magnetizations are in good agreement with data obtained from TEM, XRD and Mössbauer spectroscopy.

  7. 21 CFR 172.712 - 1,3-Butylene glycol.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Other Specific Usage Additives § 172.712 1,3-Butylene glycol. The food additive 1,3-butylene glycol (CAS Reg. No. 107-88-0) may be safely... condensation of acetaldehyde followed by catalytic hydrogenation. (b) The food additive shall conform to...

  8. 21 CFR 172.712 - 1,3-Butylene glycol.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Other Specific Usage Additives § 172.712 1,3-Butylene glycol. The food additive 1,3-butylene glycol (CAS... reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available from the Office of...

  9. 40 CFR 721.6493 - Amidoamine modified polyethylene glycol (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Amidoamine modified polyethylene... Specific Chemical Substances § 721.6493 Amidoamine modified polyethylene glycol (generic). (a) Chemical... as an amidoamine modified polyethylene glycol (PMN P-99-0645) is subject to reporting under...

  10. 40 CFR 721.6493 - Amidoamine modified polyethylene glycol (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Amidoamine modified polyethylene... Specific Chemical Substances § 721.6493 Amidoamine modified polyethylene glycol (generic). (a) Chemical... as an amidoamine modified polyethylene glycol (PMN P-99-0645) is subject to reporting under...

  11. 40 CFR 721.6493 - Amidoamine modified polyethylene glycol (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Amidoamine modified polyethylene... Specific Chemical Substances § 721.6493 Amidoamine modified polyethylene glycol (generic). (a) Chemical... as an amidoamine modified polyethylene glycol (PMN P-99-0645) is subject to reporting under...

  12. 40 CFR 721.6493 - Amidoamine modified polyethylene glycol (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Amidoamine modified polyethylene... Specific Chemical Substances § 721.6493 Amidoamine modified polyethylene glycol (generic). (a) Chemical... as an amidoamine modified polyethylene glycol (PMN P-99-0645) is subject to reporting under...

  13. 40 CFR 721.6493 - Amidoamine modified polyethylene glycol (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Amidoamine modified polyethylene... Specific Chemical Substances § 721.6493 Amidoamine modified polyethylene glycol (generic). (a) Chemical... as an amidoamine modified polyethylene glycol (PMN P-99-0645) is subject to reporting under...

  14. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic). 721.10038 Section 721.10038... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  15. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic). 721.10038 Section 721.10038... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  16. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic). 721.10038 Section 721.10038... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  17. Water potential of aqueous polyethylene glycol.

    PubMed

    Steuter, A A

    1981-01-01

    Water potential (Psiomega) values were determined for aqueous colloids of four molecular sizes of polyethylene glycol (PEG) using freezing-point depression and vapor-pressure deficit methods. A significant third-order interaction exists between the method used to determine Psiomega, PEG molecular size, and concentration. At low PEG concentrations, freezing-point depression measurements result in higher (less negative) values for Psiomega than do vapor-pressure deficit measurements. The reverse is true at high concentrations. PEG in water does not behave according to van't Hoff's law. Psiomega is related to molality for a given PEG but not linearly. Moreover, Psiomega varies with the molecular size of the PEG. It is suggested that the Psiomega of PEG in water may be controlled primarily by the matric forces of ethylene oxide subunits of the PEG polymer. The term matricum is proposed for PEG in soil-plant-water relation studies. PMID:16661635

  18. Ethylene glycol: properties, synthesis, and applications.

    PubMed

    Yue, Hairong; Zhao, Yujun; Ma, Xinbin; Gong, Jinlong

    2012-06-01

    Ethylene glycol (EG) is an important organic compound and chemical intermediate used in a large number of industrial processes (e.g. energy, plastics, automobiles, and chemicals). Indeed, owing to its unique properties and versatile commercial applications, a variety of chemical systems (e.g., catalytic and non-catalytic) have been explored for the synthesis of EG, particularly via reaction processes derived from fossil fuels (e.g., petroleum, natural gas, and coal) and biomass-based resources. This critical review describes a broad spectrum of properties of EG and significant advances in the prevalent synthesis and applications of EG, with emphases on the catalytic reactivity and reaction mechanisms of the main synthetic methodologies and applied strategies. We also provide an overview regarding the challenges and opportunities for future research associated with EG. PMID:22488259

  19. Millimetre wave rotational spectrum of glycolic acid

    NASA Astrophysics Data System (ADS)

    Kisiel, Zbigniew; Pszczółkowski, Lech; Białkowska-Jaworska, Ewa; Charnley, Steven B.

    2016-03-01

    The pure rotational spectrum of glycolic acid, CH2OHCOOH, was studied in the region 115-318 GHz. For the most stable SSC conformer, transitions in all vibrational states up to 400 cm-1 have been measured and their analysis is reported. The data sets for the ground state, v21 = 1 , and v21 = 2 have been considerably extended. Immediately higher in vibrational energy are two triads of interacting vibrational states and their rotational transitions have been assigned and successfully fitted with coupled Hamiltonians accounting for Fermi and Coriolis resonances. The derived energy level spacings establish that the vibrational frequency of the ν21 mode is close to 100 cm-1. The existence of the less stable AAT conformer in the near 50 °C sample used in our experiment was also confirmed and additional transitions have been measured.

  20. Diethylene glycol poisoning in Gurgaon, India, 1998.

    PubMed Central

    Singh, J.; Dutta, A. K.; Khare, S.; Dubey, N. K.; Harit, A. K.; Jain, N. K.; Wadhwa, T. C.; Gupta, S. R.; Dhariwal, A. C.; Jain, D. C.; Bhatia, R.; Sokhey, J.

    2001-01-01

    OBJECTIVE: To discover the cause of acute renal failure in 36 children aged 2 months to 6 years who were admitted to two hospitals in Delhi between 1 April and 9 June 1998. METHODS: Data were collected from hospital records, parents and doctors of the patients, and district health officials. Further information was obtained from house visits and community surveys; blood and stool samples were collected from other ill children, healthy family members and community contacts. Samples of drinking-water and water from a tube-well were tested for coliform organisms. FINDINGS: Most of the children (26/36) were from the Gurgaon district in Haryana or had visited Gurgaon town for treatment of a minor illness. Acute renal failure developed after an episode of acute febrile illness with or without watery diarrhoea or mild respiratory symptoms for which the children had been treated with unknown medicines by private medical practitioners. On admission to hospital the children were not dehydrated. Median blood urea concentration was 150 mg/dl (range 79-311 mg/dl) and median serum creatinine concentration was 5.6 mg/dl (range 2.6-10.8 mg/dl). Kidney biopsy showed acute tubular necrosis. Thirty-three children were known to have died despite being treated with peritoneal dialysis and supportive therapy. CONCLUSION: Cough expectorant manufactured by a company in Gurgaon was found to be contaminated with diethylene glycol (17.5% v/v), but a sample of acetaminophen manufactured by the same company tested negative for contamination when gas-liquid chromatography was used. Thus, poisoning with diethylene glycol seems to be the cause of acute renal failure in these children. PMID:11242827

  1. [Heat resistance of "Bacillus subtilis" and "Bacillus stearothermophilus" spores in ethylene glycol, propylene glycol and butylene glycol solutions. Criticism of the use of thermodynamic parameters (author's transl)].

    PubMed

    Cerf, O; L'Haridon, R; Hermier, J

    1975-01-01

    Increasing concentrations of ethylene glycol (EG), 1,2-propylene glycol (PG) or 2,3-butylene glycol (BG) lower the heat resistance of B. subtilis SJ2 and B. stearothermophilus 1518 spores, and there is a linear relationship between logarithm of decimal reduction time (D) and glycol concentration. D120 degreesc values of B. subtilis spores in 0.02M, pH 7.0 phosphate buffer containing 20 per cent (w/w) EG, PG and BG are respectively 1, 0.7 and 1.1 min compared to 1.5 min in buffer alone. Corresponding values for B. stearothermophilus spores are 2, 2.4 and 3 min compared to 3.2 min. The type of glycol has little effect upon temperature coefficient z for destruction of the B. subtilis spores (average 6.9 degrees C). On the contrary, in the case of B. stearothermophilus, z increases when the number of carbons increases in the glycol molecule (from 7 to 15 degrees). The thermodynamic parameters which characterize the activation of the spore destruction reaction cannot lead to a general conclusion about a possible mechanism of destruction in the presence of chemical compounds belonging to an homologous series: the two behave diversely, and there is no "isokinetic temperature". PMID:811145

  2. Concentration of Nicotine and Glycols in 27 Electronic Cigarette Formulations.

    PubMed

    Peace, Michelle R; Baird, Tyson R; Smith, Nathaniel; Wolf, Carl E; Poklis, Justin L; Poklis, Alphonse

    2016-07-01

    Personal battery-powered vaporizers or electronic cigarettes were developed to deliver a nicotine vapor such that smokers could simulate smoking tobacco without the inherent pathology of inhaled tobacco smoke. Electronic cigarettes and their e-cigarette liquid formulations are virtually unregulated. These formulations are typically composed of propylene glycol and/or glycerin, flavoring components and an active drug, such as nicotine. Twenty-seven e-cigarette liquid formulations that contain nicotine between 6 and 22 mg/L were acquired within the USA and analyzed by various methods to determine their contents. They were screened by Direct Analysis in Real Time™ Mass Spectrometry (DART-MS). Nicotine was confirmed and quantitated by high-performance liquid chromatography-tandem mass spectrometry, and the glycol composition was confirmed and quantitated by gas chromatography-mass spectrometry. The DART-MS screening method was able to consistently identify the exact mass peaks resulting from the protonated molecular ion of nicotine, glycol and a number of flavor additives within 5 mmu. Nicotine concentrations were determined to range from 45 to 131% of the stated label concentration, with 18 of the 27 have >10% variance. Glycol composition was generally accurate to the product description, with only one exception where the propylene glycol to glycerin percentage ratio was stated as 50:50 and the determined concentration of propylene glycol to glycerin was 81:19 (% v/v). No unlabeled glycols were detected in these formulations. PMID:27165804

  3. Degradation of ethylene glycol using Fenton's reagent and UV.

    PubMed

    McGinnis, B D; Adams, V D; Middlebrooks, E J

    2001-10-01

    Oxidation of ethylene glycol in aqueous solutions was found to occur with the addition of Fenton's reagent with further conversion observed upon UV irradiation. The pH range studied was 2.5-9.0 with initial H2O2 concentrations ranging from 100 to 1000 mg/l. Application of this method to airport storm-water could potentially result in reduction of chemical oxygen demand by conversion of ethylene glycol to oxalic and formic acids. Although the amount of H2O2 added follows the amount of ethylene glycol degraded, smaller H2O2 doses were associated with increases in the ratio of ethylene glycol removed per unit H2O2 added indicating the potential of pulsed doses or constant H2O2 feed systems. Ethylene glycol removal was enhanced by exposure to UV light after treatment with Fenton's reagent, with rates dependent on initial H2O2 concentration. In addition to ethylene glycol, the principle products of this reaction, oxalic and formic acids, have been shown to be mineralized in other HO generating systems presenting the potential for ethylene glycol mineralization in this system with increased HO* production. PMID:11572583

  4. The localization of glycollate-pathway enzymes in Euglena.

    PubMed

    Collins, N; Merrett, M J

    1975-05-01

    Isolation of organelles from broken-cell suspensions of phototrophically grown Euglena gracilis Klebs was achieved by isopycnic centrifugation on sucrose gradients. 2. Equilibrium densities of 1.23g/cm3 for peroxisome-like particles, 1.22g/cm3 for mitochondria and 1.17g/cm3 for chloroplasts were recorded. 3. The enzymes glycollate dehydrogenase, glutamate-glyoxylate aminotransferase, serineglyoxylate aminotransferase, aspartate-alpha-oxoglutarate aminotransferase, hydroxy pyruvate reductase and malate dehydrogenase were present in peroxisome-like particles. 4. Unlike higher plants glycollate dehydrogenase and glutamate-glyoxylate aminotransferase were present in the mitochondria of Euglena. 5. Rates of glycollate and D-lactate oxidation were additive in the mitochondria, and, although glycollate dehydrogenase was inhibited by cyanide, D-lactate dehydrogenase activity was unaffected. 6. Glycollate oxidation was linked to O2 uptake in mitochondria but not in peroxisome-like particles. This glycollate-dependent O2 uptake was inhibited by antimycin A or cyanide. 7. The physiological significance of glycollate metabolism in Euglena mitochondria is discussed, with special reference to its role in photorespiration in algae. PMID:1156408

  5. Estimation of glycol air emissions from aircraft deicing

    SciTech Connect

    McCready, D.

    1998-12-31

    Ethylene glycol (EG) and propylene glycol (PG)-based fluids (collectively referred to as glycol) are recognized as effective in removing and preventing snow and ice contamination on aircraft before take-off. Although much work has been done to develop an understanding of the potential impact of spent fluid run-off to water bodies, little attention has been paid to the potential environmental impact, if any, due to air emissions. In order to determine potential impact from air emissions, it is necessary to develop a protocol for estimating the glycol emissions during deicing operations. This paper presents two approaches for estimating glycol air emissions from aircraft deicing fluids (ADF) and aircraft anti-icing fluids (AAF). The first simple approach is based on emission factors and the quantity of fluid applied. The second approach estimates emissions for a typical deicing event based on site-specific parameters. Sample calculations are presented. The predicted glycol evaporation rates are quite low. Calculated emissions from ethylene glycol-based fluids are lower than emissions from PG-based fluids. The calculated air emissions for a typical event are less than a pound for EG-based fluids. The emission rate from PG-based fluids can be two times greater.

  6. Absorption of some glycol ethers through human skin in vitro.

    PubMed Central

    Dugard, P H; Walker, M; Mawdsley, S J; Scott, R C

    1984-01-01

    To assist evaluation of the hazards of skin contact with selected undiluted glycol ethers, their absorption across isolated human abdominal epidermis was measured in vitro. Epidermal membranes were set up in glass diffusion cells and, following an initial determination of permeability to tritiated water, excess undiluted glycol ether was applied to the outer surface for 8 hr. The appearance of glycol ether in an aqueous "receptor" phase bathing the underside of the epidermis was quantified by a gas chromatographic technique. A final determination of tritiated water permeability was compared with initial values to establish any irreversible alterations in epidermal barrier function induced by contact with the glycol ethers. 2-methoxyethanol (EM) was most readily absorbed (mean steady rate 2.82 mg/cm2/hr), and a relatively high absorption rate (1.17 mg/cm2/hr) was also apparent for 1-methoxypropan-2-ol (PM). There was a trend of reducing absorption rate with increasing molecular weight or reducing volatility for monoethylene glycol ethers (EM, 2.82 mg/cm2/hr; 2-ethoxyethanol, EE, 0.796 mg/cm2/hr; 2-butoxyethanol, EB, 0.198 mg/cm2/hr) and also within the diethylene glycol series: 2-(2-methoxyethoxy) ethanol (DM, 0.206 mg/cm2/hr); 2-(2-ethoxyethoxy) ethanol (DE, 0.125 mg/cm2/hr) and 2-(2-butoxyethoxy) ethanol (DB, 0.035 mg/cm2/hr). The rate of absorption of 2-ethoxyethyl acetate (EEAc) was similar to that of the parent alcohol, EE. Absorption rates of diethylene glycol ethers were slower than their corresponding monoethylene glycol equivalents. Combination of intrinsic toxicity and ability to pass across skin contribute to assessment of hazards of contact with undiluted glycol ethers. PMID:6499804

  7. GLYCOLIC ACID PHYSICAL PROPERTIES, IMPURITIES, AND RADIATION EFFECTS ASSESSMENT

    SciTech Connect

    Pickenheim, B.; Bibler, N.

    2010-06-08

    The DWPF is pursuing alternative reductants/flowsheets to increase attainment to meet closure commitment dates. In fiscal year 2009, SRNL evaluated several options and recommended the further assessment of the nitric/formic/glycolic acid flowsheet. SRNL is currently performing testing with this flowsheet to support the DWPF down-select of alternate reductants. As part of the evaluation, SRNL was requested to determine the physical properties of formic and glycolic acid blends. Blends of formic acid in glycolic acid were prepared and their physical properties tested. Increasing amounts of glycolic acid led to increases in blend density, viscosity and surface tension as compared to the 90 wt% formic acid that is currently used at DWPF. These increases are small, however, and are not expected to present any difficulties in terms of processing. The effect of sulfur impurities in technical grade glycolic acid was studied for its impact on DWPF glass quality. While the glycolic acid specification allows for more sulfate than the current formic acid specification, the ultimate impact is expected to be on the order of 0.03 wt% sulfur in glass. Note that lower sulfur content glycolic acid could likely be procured at some increased cost if deemed necessary. A paper study on the effects of radiation on glycolic acid was performed. The analysis indicates that substitution of glycolic acid for formic acid would not increase the radiolytic production rate of H{sub 2} and cause an adverse effect in the SRAT or SME process. It has been cited that glycolic acid solutions that are depleted of O{sub 2} when subjected to large radiation doses produced considerable quantities of a non-diffusive polymeric material. Considering a constant air purge is maintained in the SRAT and the solution is continuously mixed, oxygen depletion seems unlikely, however, if this polymer is formed in the SRAT solution, the rheology of the solution may be affected and pumping of the solution may be

  8. Human inhalation exposure to ethylene glycol.

    PubMed

    Carstens, Jörn; Csanády, György A; Faller, Thomas H; Filser, Johannes G

    2003-08-01

    Two male volunteers (A and B) inhaled 1.43 and 1.34 mmol, respectively, of vaporous (13)C-labeled ethylene glycol ((13)C(2)-EG) over 4 h. In plasma, (13)C(2)-EG and its metabolite (13)C(2)-glycolic acid ((13)C(2)-GA) were determined together with the natural burden from background GA using a gas chromatograph equipped with a mass selective detector. Maximum plasma concentrations of (13)C(2)-EG were 11.0 and 15.8 micromol/l, and of (13)C(2)-GA were 0.9 and 1.8 micromol/l, for volunteers A and B, respectively. Corresponding plasma half-lives were 2.1 and 2.6 h for (13)C(2)-EG, and 2.9 and 2.6 h for (13)C(2)-GA. Background GA concentrations were 25.8 and 28.3 micro mol/l plasma. Unlabeled background EG, GA and oxalic acid (OA) were detected in urine in which the corresponding (13)C-labeled compounds were also quantified. Within 28 h after the start of the exposures, 6.4% and 9.3% (13)C(2)-EG, 0.70% and 0.92% (13)C(2)-GA, as well as 0.08% and 0.28% (13)C(2)-OA of the inhaled amounts of (13)C(2)-EG, were excreted in urine by volunteers A and B, respectively. The amounts of (13)C(2)-GA represented 3.7% and 14.2% of background urinary GA excreted over 24 h (274 and 88 micromol). The amounts of (13)C(2)-OA were 0.5% and 2.1% of background urinary OA excreted over 24 h (215 and 177 micromol). From the findings obtained in plasma and urine and from a toxicokinetic analysis of these data, it is highly unlikely that workplace EG exposure according to the German exposure limit (MAK-value 10 ppm EG, 8 h) could lead to adverse effects from the metabolically formed GA and OA. PMID:12856104

  9. Urinary excretion of polyethylene glycol 3350 and sulfate after gut lavage with a polyethylene glycol electrolyte lavage solution.

    PubMed

    Brady, C E; DiPalma, J A; Morawski, S G; Santa Ana, C A; Fordtran, J S

    1986-06-01

    Ingestion of an electrolyte lavage solution containing polyethylene glycol 3350 and sulfate is an effective method of cleansing the colon for diagnostic studies. Polyethylene glycol and sulfate are considered poorly absorbed from the gastrointestinal tract. Because of the quantities administered, concern exists about potential toxicity of absorption of even a small percentage, particularly for polyethylene glycol. We measured the urinary excretion of both polyethylene glycol and sulfate in normal subjects and inflammatory bowel patients. Absorption of polyethylene glycol can be assessed by measuring recovery in urine, as 85%-96% of an intravenous load is excreted in urine. Similarly, appreciable sulfate absorption would exceed renal tubular reabsorption and result in increased urinary excretion. Mean percent polyethylene glycol load recovered in urine was minimal and similar for normal (0.06%) and inflammatory bowel (0.09%) subjects. Urinary sulfate excretion after lavage was also similar for both groups and was not different from baseline. These results do not suggest the likelihood of toxicity due to polyethylene glycol 3350 or sulfate absorption during gut lavage with this solution. PMID:3699408

  10. Redox-labelled poly(ethylene glycol) used as a diffusion probe in poly(ethylene glycol) melts

    SciTech Connect

    Haas, O.; Velasquez, C.; Porat, Z.

    1995-12-01

    Ferrocene labelled monomethyl poly(ethylene glycol) MPEG with molecular weights of 1900 and 750 was prepared and used as an electrochemical diffusion probe in poly(ethylene glycol) melts. Cyclic voltammetry and chronoamperometry were used in connection with microdisk electrodes to measure the diffusion coefficient of redox tagged molecules using melted poly(ethylene glycol) as a solvent. The molecular weight of the solvent polymer was 750, 2000 and 20000. Results from the temperature dependency of the diffusion process and of the viscosity and conductivity of the polymer electrolyte are presented and discussed.

  11. Intercalation of ethylene glycol into yttrium hydroxide layered materials.

    PubMed

    Xi, Yuanzhou; Davis, Robert J

    2010-04-19

    Intercalation of ethylene glycol into layered yttrium hydroxide containing nitrate counterions was accomplished by heating the reagents in a methanol solution of sodium methoxide under autogenous pressure at 413 K for 20 h. The resulting crystalline material had an expanded interlayer distance of 10.96 A, confirming the intercalation of an ethylene glycol derived species. Characterization of the material by FT-IR spectroscopy, thermogravimetric analysis, and the catalytic transesterification of tributyrin with methanol was consistent with direct bonding of ethylene glycolate anions (O(2)C(2)H(5)(-)) to the yttrium hydroxide layers, forming Y-O-C bonds. The layers of the material are proposed to be held together by H-bonding between the hydroxyls of grafted ethylene glycol molecules attached to adjacent layers. Glycerol can also be intercalated into yttrium hydroxide layered materials by a similar method. PMID:20302308

  12. Why does glycol inhibit CO{sub 2} corrosion?

    SciTech Connect

    Gulbrandsen, E.; Morad, J.H.

    1998-12-31

    CO{sub 2} corrosion of carbon steel and its inhibition in mixtures of water and ethylene glycol (MEG) or diethylene glycol (DEG) has been studied at 1 bar CO{sub 2}, 25 C, pH 5 under natural convection conditions. Corrosion rates predicted by the glycol correction factor of DeWaard et al. were in mutual agreement with the experimental results. Analysis of the experimental results shows that the corrosion inhibitor effect of MEG and DEG can be correlated to changes in solution properties with increasing MEG or DEG concentration, such as decreased CO{sub 2} volubility, decreased CO{sub 2} diffusivity/increased solution viscosity, decreased water activity and decreased solution polarity. Also described is an impurity related corrosion inhibition that can be very efficient, and possible ways to improve the inhibitor effect of glycol solutions by adding small amounts of inhibitor compounds.

  13. Measurement of diffusion coefficient of propylene glycol in skin tissue

    NASA Astrophysics Data System (ADS)

    Genin, Vadim D.; Bashkatov, Alexey N.; Genina, Elina A.; Tuchin, Valery V.

    2015-03-01

    Optical clearing of the rat skin under the action of propylene glycol was studied ex vivo. It was found that collimated transmittance of skin samples increased, whereas weight and thickness of the samples decreased during propylene glycol penetration in skin tissue. A mechanism of the optical clearing under the action of propylene glycol is discussed. Diffusion coefficient of propylene glycol in skin tissue ex vivo has been estimated as (1.35±0.95)×10-7 cm2/s with the taking into account of kinetics of both weight and thickness of skin samples. The presented results can be useful for enhancement of many methods of laser therapy and optical diagnostics of skin diseases and localization of subcutaneous neoplasms.

  14. PNNL Provides Catalyst for Sustainable Propylene Glycol Production

    SciTech Connect

    Madison, Alison L.; Lund, Eric C.

    2012-02-28

    Submission for annual FLC magazine publication, Technology for Today, featuring technologies transferred by federal labs. Subject: PNNL transfer of Propylene Glycol from Renewable Sources catalytic process to Archer Daniels Midland Company.

  15. GLYCOLIC ACID PHYSICAL PROPERTIES, IMPURITIES, AND RADIATION EFFECTS ASSESSMENT

    SciTech Connect

    Lambert, D.; Pickenheim, B.; Hay, M.

    2011-06-20

    The Defense Waste Processing Facility (DWPF) is pursuing alternative reductants/flowsheets to increase attainment to meet closure commitment dates. In fiscal year 2009, SRNL evaluated several options and recommended the further assessment of the nitric/formic/glycolic acid flowsheet. SRNL is currently performing testing with this flowsheet to support the DWPF down-select of alternate reductants. As part of the evaluation, SRNL was requested to determine the physical properties of formic and glycolic acid blends. Blends of formic acid in glycolic acid were prepared and their physical properties tested. Increasing amounts of glycolic acid led to increases in blend density, viscosity and surface tension as compared to the 90 wt% formic acid that is currently used at DWPF. These increases are small, however, and are not expected to present any difficulties in terms of processing. The effect of sulfur impurities in technical grade glycolic acid was studied for its impact on DWPF glass quality. While the glycolic acid specification allows for more sulfate than the current formic acid specification, the ultimate impact is expected to be on the order of 0.03 wt% sulfur in glass. Note that lower sulfur content glycolic acid could likely be procured at some increased cost if deemed necessary. A paper study on the effects of radiation on glycolic acid was performed. The analysis indicates that substitution of glycolic acid for formic acid would not increase the radiolytic production rate of H{sub 2} and cause an adverse effect in the SRAT or SME process. It has been cited that glycolic acid solutions that are depleted of O{sub 2} when subjected to large radiation doses produced considerable quantities of a non-diffusive polymeric material. Considering a constant air purge is maintained in the SRAT and the solution is continuously mixed, oxygen depletion seems unlikely, however, if this polymer is formed in the SRAT solution, the rheology of the solution may be affected and

  16. 21 CFR 172.820 - Polyethylene glycol (mean molecular weight 200-9,500).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... ethylene oxide and water with a mean molecular weight of 200 to 9,500. (2) It contains no more than 0.2... the total ethylene and diethylene glycol content of polyethylene glycols having mean molecular weights... and diethylene glycol content of polyethylene glycols having mean molecular weights below...

  17. 21 CFR 172.820 - Polyethylene glycol (mean molecular weight 200-9,500).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... ethylene oxide and water with a mean molecular weight of 200 to 9,500. (2) It contains no more than 0.2... the total ethylene and diethylene glycol content of polyethylene glycols having mean molecular weights... and diethylene glycol content of polyethylene glycols having mean molecular weights below...

  18. 40 CFR 721.7255 - Polyethyleneamine crosslinked with substituted polyethylene glycol (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... substituted polyethylene glycol (generic). 721.7255 Section 721.7255 Protection of Environment ENVIRONMENTAL... substituted polyethylene glycol (generic). (a) Chemical substance and significant new uses subject to... substituted polyethylene glycol with substituted polyethylene glycol (PMN P-01-833) is subject to...

  19. 40 CFR 721.7255 - Polyethyleneamine crosslinked with substituted polyethylene glycol (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... substituted polyethylene glycol (generic). 721.7255 Section 721.7255 Protection of Environment ENVIRONMENTAL... substituted polyethylene glycol (generic). (a) Chemical substance and significant new uses subject to... substituted polyethylene glycol with substituted polyethylene glycol (PMN P-01-833) is subject to...

  20. 40 CFR 721.7255 - Polyethyleneamine crosslinked with substituted polyethylene glycol (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... substituted polyethylene glycol (generic). 721.7255 Section 721.7255 Protection of Environment ENVIRONMENTAL... substituted polyethylene glycol (generic). (a) Chemical substance and significant new uses subject to... substituted polyethylene glycol with substituted polyethylene glycol (PMN P-01-833) is subject to...

  1. 40 CFR 721.7255 - Polyethyleneamine crosslinked with substituted polyethylene glycol (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... substituted polyethylene glycol (generic). 721.7255 Section 721.7255 Protection of Environment ENVIRONMENTAL... substituted polyethylene glycol (generic). (a) Chemical substance and significant new uses subject to... substituted polyethylene glycol with substituted polyethylene glycol (PMN P-01-833) is subject to...

  2. 40 CFR 721.7255 - Polyethyleneamine crosslinked with substituted polyethylene glycol (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... substituted polyethylene glycol (generic). 721.7255 Section 721.7255 Protection of Environment ENVIRONMENTAL... substituted polyethylene glycol (generic). (a) Chemical substance and significant new uses subject to... substituted polyethylene glycol with substituted polyethylene glycol (PMN P-01-833) is subject to...

  3. Material compatibility evaluation for DWPF nitric-glycolic acid-literature review

    SciTech Connect

    Mickalonis, J.; Skidmore, E.

    2013-06-01

    Glycolic acid is being evaluated as an alternative for formic and nitric acid in the DWPF flowsheet. Demonstration testing and modeling for this new flowsheet has shown that glycolic acid and glycolate has a potential to remain in certain streams generated during the production of the nuclear waste glass. A literature review was conducted to assess the impact of glycolic acid on the corrosion of the materials of construction for the DWPF facility as well as facilities downstream which may have residual glycolic acid and glycolates present. The literature data was limited to solutions containing principally glycolic acid.

  4. An evaluation of microbial growth and corrosion of 316L SS in glycol/seawater mixtures.

    PubMed

    Lee, Jason S; Ray, Richard I; Lowe, Kristine L; Jones-Meehan, Joanne; Little, Brenda J

    2003-04-01

    Glycol/seawater mixtures containing > 50% glycol inhibit corrosion of 316L stainless steel and do not support bacterial growth. The results indicate bacteria are able to use low concentrations of glycol (10%) as a growth medium, but bacterial growth decreased with increasing glycol concentration. Pitting potential, determined by anodic polarization, was used to evaluate susceptibility of 316L SS to corrosion in seawater-contaminated glycol. Mixture containing a minimum concentration of 50% propylene glycol-based coolant inhibited pitting corrosion. A slightly higher minimum concentration (55%) was needed for corrosion protection in ethylene glycol mixtures. PMID:14618716

  5. An evaluation of microbial growth and corrosion of 316L SS in glycol/seawater mixtures

    NASA Technical Reports Server (NTRS)

    Lee, Jason S.; Ray, Richard I.; Lowe, Kristine L.; Jones-Meehan, Joanne; Little, Brenda J.

    2003-01-01

    Glycol/seawater mixtures containing > 50% glycol inhibit corrosion of 316L stainless steel and do not support bacterial growth. The results indicate bacteria are able to use low concentrations of glycol (10%) as a growth medium, but bacterial growth decreased with increasing glycol concentration. Pitting potential, determined by anodic polarization, was used to evaluate susceptibility of 316L SS to corrosion in seawater-contaminated glycol. Mixture containing a minimum concentration of 50% propylene glycol-based coolant inhibited pitting corrosion. A slightly higher minimum concentration (55%) was needed for corrosion protection in ethylene glycol mixtures.

  6. Mitochondrial glycolate oxidation contributes to photorespiration in higher plants.

    PubMed

    Niessen, Markus; Thiruveedhi, Krishnaveni; Rosenkranz, Ruben; Kebeish, Rashad; Hirsch, Heinz-Josef; Kreuzaler, Fritz; Peterhänsel, Christoph

    2007-01-01

    The oxidation of glycolate to glyoxylate is an important reaction step in photorespiration. Land plants and charophycean green algae oxidize glycolate in the peroxisome using oxygen as a co-factor, whereas chlorophycean green algae use a mitochondrial glycolate dehydrogenase (GDH) with organic co-factors. Previous analyses revealed the existence of a GDH in the mitochondria of Arabidopsis thaliana (AtGDH). In this study, the contribution of AtGDH to photorespiration was characterized. Both RNA abundance and mitochondrial GDH activity were up-regulated under photorespiratory growth conditions. Labelling experiments indicated that glycolate oxidation in mitochondrial extracts is coupled to CO(2) release. This effect could be enhanced by adding co-factors for aminotransferases, but is inhibited by the addition of glycine. T-DNA insertion lines for AtGDH show a drastic reduction in mitochondrial GDH activity and CO(2) release from glycolate. Furthermore, photorespiration is reduced in these mutant lines compared with the wild type, as revealed by determination of the post-illumination CO(2) burst and the glycine/serine ratio under photorespiratory growth conditions. The data show that mitochondrial glycolate oxidation contributes to photorespiration in higher plants. This indicates the conservation of chlorophycean photorespiration in streptophytes despite the evolution of leaf-type peroxisomes. PMID:17595195

  7. A glycolate dehydrogenase in the mitochondria of Arabidopsis thaliana.

    PubMed

    Bari, Rafijul; Kebeish, Rashad; Kalamajka, Rainer; Rademacher, Thomas; Peterhänsel, Christoph

    2004-03-01

    The fixation of molecular O2 by the oxygenase activity of Rubisco leads to the formation of phosphoglycolate in the chloroplast that is further metabolized in the process of photorespiration. The initial step of this pathway is the oxidation of glycolate to glyoxylate. Whereas in higher plants this reaction takes place in peroxisomes and is dependent on oxygen as a co-factor, most algae oxidize glycolate in the mitochondria using organic co-factors. The identification and characterization of a novel glycolate dehydrogenase in Arabidopsis thaliana is reported here. The enzyme is dependent on organic co-factors and resembles algal glycolate dehydrogenases in its enzymatic properties. Mutants of E. coli incapable of glycolate oxidation can be complemented by overexpression of the Arabidopsis open reading frame. The corresponding RNA accumulates preferentially in illuminated leaves, but was also found in other tissues investigated. A fusion of the N-terminal part of the Arabidopsis glycolate dehydrogenase to red fluorescent protein accumulates in mitochondria when overexpressed in the homologous system. Based on these results it is proposed that the basic photorespiratory system of algae is conserved in higher plants. PMID:14966218

  8. Activation of Cytosolic Pyruvate Kinase by Polyethylene Glycol.

    PubMed Central

    Podesta, F. E.; Plaxton, W. C.

    1993-01-01

    Homogeneous cytosolic pyruvate kinase from endosperm of germinating castor oil (Ricinus communis L. cv Hale) seeds was potently activated by polyethylene glycol. The addition of 5% (w/v) polyethylene glycol to the pyruvate kinase reaction mixture caused a 2.6-fold increase in maximal velocity and 12.5- and 2-fold reductions in Km values for phosphoenolpyruvate and ADP, respectively. Glycerol, ethylene glycol, and bovine serum albumin also enhanced pyruvate kinase activity, albeit to a lesser extent than polyethylene glycol. The addition of 5% (w/v) polyethylene glycol to the elution buffer during high-performance gel filtration chromatography of purified cytosolic pyruvate kinase helped to stabilize the active heterotetrameric native structure of the enzyme. A higher degree of inhibition by MgATP, but lower sensitivity to the inhibitors 3-phosphoglycerate and fructose- 1,6-bisphosphate, was also observed in the presence of 5% (w/v) polyethylene glycol. It is concluded that (a) plant cytosolic pyruvate kinase activity and regulation, like that of other regulatory pyruvate kinases, is modified by extreme dilution in the assay medium, probably as a result of deaggregation of the native tetrameric enzyme, and (b) ATP is probably the major metabolic effector of germinating castor endosperm cytosolic pyruvate kinase in vivo. PMID:12231936

  9. Activation of Cytosolic Pyruvate Kinase by Polyethylene Glycol.

    PubMed

    Podesta, F. E.; Plaxton, W. C.

    1993-09-01

    Homogeneous cytosolic pyruvate kinase from endosperm of germinating castor oil (Ricinus communis L. cv Hale) seeds was potently activated by polyethylene glycol. The addition of 5% (w/v) polyethylene glycol to the pyruvate kinase reaction mixture caused a 2.6-fold increase in maximal velocity and 12.5- and 2-fold reductions in Km values for phosphoenolpyruvate and ADP, respectively. Glycerol, ethylene glycol, and bovine serum albumin also enhanced pyruvate kinase activity, albeit to a lesser extent than polyethylene glycol. The addition of 5% (w/v) polyethylene glycol to the elution buffer during high-performance gel filtration chromatography of purified cytosolic pyruvate kinase helped to stabilize the active heterotetrameric native structure of the enzyme. A higher degree of inhibition by MgATP, but lower sensitivity to the inhibitors 3-phosphoglycerate and fructose- 1,6-bisphosphate, was also observed in the presence of 5% (w/v) polyethylene glycol. It is concluded that (a) plant cytosolic pyruvate kinase activity and regulation, like that of other regulatory pyruvate kinases, is modified by extreme dilution in the assay medium, probably as a result of deaggregation of the native tetrameric enzyme, and (b) ATP is probably the major metabolic effector of germinating castor endosperm cytosolic pyruvate kinase in vivo. PMID:12231936

  10. GLYCOLIC-FORMIC ACID FLOWSHEET FINAL REPORT FOR DOWNSELECTION DECISION

    SciTech Connect

    Lambert, D.; Pickenheim, B.; Stone, M.; Newell, J.; Best, D.

    2011-03-10

    Flowsheet testing was performed to develop the nitric-glycolic-formic acid flowsheet (referred to as the glycolic-formic flowsheet throughout the rest of the report) as an alternative to the nitric/formic flowsheet currently being processed at the DWPF. This new flowsheet has shown that mercury can be removed in the Sludge Receipt and Adjustment Tank (SRAT) with minimal hydrogen generation. All processing objectives were also met, including greatly reducing the Slurry Mix Evaporator (SME) product yield stress as compared to the baseline nitric/formic flowsheet. Forty-six runs were performed in total, including the baseline run and the melter feed preparation runs. Significant results are summarized. The baseline nitric/formic flowsheet run, using the SB6 simulant produced by Harrell was extremely difficult to process successfully under existing DWPF acceptance criteria with this simulant at the HM levels of noble metals. While nitrite was destroyed and mercury was removed to near the DWPF limit, the rheology of the SRAT and SME products were well above design basis and hydrogen generation far exceeded the DWPF SRAT limit. In addition, mixing during the SME cycle was very poor. In this sense, the nitric/glycolic/formic acid flowsheet represents a significant upgrade over the current flowsheet. Mercury was successfully removed with almost no hydrogen generation and the SRAT and SME products yield stresses were within process limits or previously processed ranges. The glycolic-formic flowsheet has a very wide processing window. Testing was completed from 100% to 200% of acid stoichiometry and using a glycolic-formic mixture from 40% to 100% glycolic acid. The testing met all processing requirements throughout these processing windows. This should allow processing at an acid stoichiometry of 100% and a glycolic-formic mixture of 80% glycolic acid with minimal hydrogen generation. It should also allow processing endpoints in the SRAT and SME at significantly higher

  11. Partitioning of differently sized poly(ethylene glycol)s into OmpF porin.

    PubMed Central

    Rostovtseva, Tatiana K; Nestorovich, Ekaterina M; Bezrukov, Sergey M

    2002-01-01

    To understand the physics of polymer equilibrium and dynamics in the confines of ion channel pores, we study partitioning of poly(ethylene glycol)s (PEGs) of different molecular weights into the bacterial porin, OmpF. Thermodynamic and kinetic parameters of partitioning are deduced from the effects of polymer addition on ion currents through single OmpF channels reconstituted into planar lipid bilayer membranes. The equilibrium partition coefficient is inferred from the average reduction of channel conductance in the presence of PEG; rates of polymer exchange between the pore and the bulk are estimated from PEG-induced conductance noise. Partition coefficient as a function of polymer weight is best fitted by a "compressed exponential" with the compression factor of 1.65. This finding demonstrates that PEG partitioning into the OmpF channel pore has sharper dependence on polymer molecular weight than predictions of hard-sphere, random-flight, or scaling models. A 1360-Da polymer separates regimes of partitioning and exclusion. Comparison of its characteristic size with the size of a 2200-Da polymer previously found to separate these regimes for the alpha-toxin shows good agreement with the x-ray structural data for these channels. The PEG-induced conductance noise is compatible with the polymer mobility reduced inside the OmpF pore by an order of magnitude relatively to its value in bulk solution. PMID:11751305

  12. Microwave spectrum and internal rotations of ethylene glycol. I. Glycol-O-d2

    NASA Astrophysics Data System (ADS)

    Walder, E.; Bauder, A.; Günthard, Hs. H.

    1980-09-01

    The microwave spectrum of a dideuterated form of ethylene glycol (glycol-O-d2, CH2ODCH2OD) has been investigated in the frequency range from 18 to 50 GHz. Among the many transitions observed, 64 rotational transitions could be assigned with the help of microwave—microwave double resonance experiments. All transitions occurred as doublets due to large amplitude motions in the molecule. A semirigid molecular model which features a collective concerted internal rotation of the two OD groups on the Born—Oppenheimer surface has been used for the assignment and analysis. This model allowed a satisfactory interpretation of the assigned transitions. From the centers of the doublets the following rotational constants and the dipole moment of a hypothetical rigid rotor could be determined: A = 14394.63(17) MHz, B = 5276.27(24) MHz, C = 4323.53(20) MHz, μa = 2.166(37)D, μb = 0.74(18)D, and μc = 0.75(21)D. An empirical potential function for the concerted internal rotation of the OD groups has been derived from the measured doublet splittings.

  13. [Determination of ethylene glycol in biological fluids--propylene glycol interferences].

    PubMed

    Gomółka, Ewa; Cudzich-Czop, Sylwia; Sulka, Adrianna

    2013-01-01

    Many laboratories in Poland do not use gas chromatography (GC) method for determination of ethylene glycol (EG) and methanol in blood of poisoned patients, they use non specific spectrophotometry methods. One of the interfering substances is propylene glycol (PG)--compound present in many medical and cosmetic products: drops, air freshens, disinfectants, electronic cigarettes and others. In Laboratory of Analytical Toxicology and Drug Monitoring in Krakow determination of EG is made by GC method. The method enables to distinguish and make resolution of (EG) and (PG) in biological samples. In the years 2011-2012 in several serum samples from diagnosed patients PG was present in concentration from several to higher than 100 mg/dL. The aim of the study was to estimate PG interferences of serum EG determination by spectrophotometry method. Serum samples containing PG and EG were used in the study. The samples were analyzed by two methods: GC and spectrophotometry. Results of serum samples spiked with PG with no EG analysed by spectrophotometry method were improper ("false positive"). The results were correlated to PG concentration in samples. Calculated cross-reactivity of PG in the method was 42%. Positive results of EG measured by spectrophotometry method must be confirmed by reference GC method. Spectrophotometry method shouldn't be used for diagnostics and monitoring of patients poisoned by EG. PMID:24466683

  14. Separation, concentration and determination of trace chloramphenicol in shrimp from different waters by using polyoxyethylene lauryl ether-salt aqueous two-phase system coupled with high-performance liquid chromatography.

    PubMed

    Lu, Yang; Yao, Hui; Li, Chuang; Han, Juan; Tan, Zhenjiang; Yan, Yongsheng

    2016-02-01

    Polyoxyethylene lauryl ether (POELE10)-NaH2PO4 aqueous two-phase extraction system (ATPES) is coupled with HPLC to analyze chloramphenicol (CAP) in aquatic product. Response surface methodology (RSM) was adopted in the multi-factor experiment to determine the optimized conditions. The extraction efficiency of CAP (E%) is up to 99.42% under the optimal conditions, namely, the concentration of NaH2PO4, the concentration of POELE10, pH and temperature were 0.186 g · mL(-1), 0.033 g · mL(-1), 3.8 and 25 °C respectively. The optimal value of enrichment factor of CAP (F) was 22.56 when the concentration of NaH2PO4 was 0.192 g · mL(-1), the concentration of POELE10 was 0.024 g/ml, pH was 4.2 and temperature was 30 °C. The limit of detection (LOD) and limit of quantification (LOQ) of this method are 0.8 μg · kg(-1) and 1 μg · kg(-1), which meet the needs of determining trace or ultratrace CAP in food. The E% and F of this technique are much better than other extraction methods. PMID:26304334

  15. Determination of glycols in air: development of sampling and analytical methodology and application to theatrical smokes.

    PubMed

    Pendergrass, S M

    1999-01-01

    Glycol-based fluids are used in the production of theatrical smokes in theaters, concerts, and other stage productions. The fluids are heated and dispersed in aerosol form to create the effect of a smoke, mist, or fog. There have been reports of adverse health effects such as respiratory irritation, chest tightness, shortness of breath, asthma, and skin rashes. Previous attempts to collect and quantify the aerosolized glycols used in fogging agents have been plagued by inconsistent results, both in the efficiency of collection and in the chromatographic analysis of the glycol components. The development of improved sampling and analytical methodology for aerosolized glycols was required to assess workplace exposures more effectively. An Occupational Safety and Health Administration versatile sampler tube was selected for the collection of ethylene glycol, propylene glycol, 1,3-butylene glycol, diethylene glycol, triethylene glycol, and tetraethylene glycol aerosols. Analytical methodology for the separation, identification, and quantitation of the six glycols using gas chromatography/flame ionization detection is described. Limits of detection of the glycol analytes ranged from 7 to 16 micrograms/sample. Desorption efficiencies for all glycol compounds were determined over the range of study and averaged greater than 90%. Storage stability results were acceptable after 28 days for all analytes except ethylene glycol, which was stable at ambient temperature for 14 days. Based on the results of this study, the new glycol method was published in the NIOSH Manual of Analytical Methods. PMID:10462779

  16. The Verification of a Method for Detecting and Quantifying Diethylene Glycol, Triethylene Glycol, Tetraethylene Glycol, 2-Butoxyethanol and 2-Methoxyethanolin in Ground and Surface Waters

    EPA Science Inventory

    This verification study was a special project designed to determine the efficacy of a draft standard operating procedure (SOP) developed by US EPA Region 3 for the determination of selected glycols in drinking waters that may have been impacted by active unconventional oil and ga...

  17. Hydration of polyethylene glycol-grafted liposomes.

    PubMed

    Tirosh, O; Barenholz, Y; Katzhendler, J; Priev, A

    1998-03-01

    This study aimed to characterize the effect of polyethylene glycol of 2000 molecular weight (PEG2000) attached to a dialkylphosphatidic acid (dihexadecylphosphatidyl (DHP)-PEG2000) on the hydration and thermodynamic stability of lipid assemblies. Differential scanning calorimetry, densitometry, and ultrasound velocity and absorption measurements were used for thermodynamic and hydrational characterization. Using a differential scanning calorimetry technique we showed that each molecule of PEG2000 binds 136 +/- 4 molecules of water. For PEG2000 covalently attached to the lipid molecules organized in micelles, the water binding increases to 210 +/- 6 water molecules. This demonstrates that the two different structural configurations of the PEG2000, a random coil in the case of the free PEG and a brush in the case of DHP-PEG2000 micelles, differ in their hydration level. Ultrasound absorption changes in liposomes reflect mainly the heterophase fluctuations and packing defects in the lipid bilayer. The PEG-induced excess ultrasound absorption of the lipid bilayer at 7.7 MHz for PEG-lipid concentrations over 5 mol % indicates the increase in the relaxation time of the headgroup rotation due to PEG-PEG interactions. The adiabatic compressibility (calculated from ultrasound velocity and density) of the lipid bilayer of the liposome increases monotonically with PEG-lipid concentration up to approximately 7 mol %, reflecting release of water from the lipid headgroup region. Elimination of this water, induced by grafted PEG, leads to a decrease in bilayer defects and enhanced lateral packing of the phospholipid acyl chains. We assume that the dehydration of the lipid headgroup region in conjunction with the increase of the hydration of the outer layer by grafting PEG in brush configuration are responsible for increasing thermodynamic stability of the liposomes at 5-7 mol % of PEG-lipid. At higher PEG-lipid concentrations, compressibility and partial volume of the lipid phase

  18. Pulmonary surfactant adsorption is increased by hyaluronan or polyethylene glycol.

    PubMed

    Taeusch, H William; Dybbro, Eric; Lu, Karen W

    2008-04-01

    In acute lung injuries, inactivating agents may interfere with transfer (adsorption) of pulmonary surfactants to the interface between air and the aqueous layer that coats the interior of alveoli. Some ionic and nonionic polymers reduce surfactant inactivation in vitro and in vivo. In this study, we tested directly whether an ionic polymer, hyaluronan, or a nonionic polymer, polyethylene glycol, enhanced adsorption of a surfactant used clinically. We used three different methods of measuring adsorption in vitro: a modified pulsating bubble surfactometer; a King/Clements device; and a spreading trough. In addition we measured the effects of both polymers on surfactant turbidity, using this assay as a nonspecific index of aggregation. We found that both hyaluronan and polyethylene glycol significantly increased the rate and degree of surfactant material adsorbed to the surface in all three assays. Hyaluronan was effective in lower concentrations (20-fold) than polyethylene glycol and, unlike polyethylene glycol, hyaluronan did not increase apparent aggregation of surfactant. Surfactant adsorption in the presence of serum was also enhanced by both polymers regardless of whether hyaluronan or polyethylene glycol was included with serum in the subphase or added to the surfactant applied to the surface. Therefore, endogenous polymers in the alveolar subphase, or exogenous polymers added to surfactant used as therapy, may both be important for reducing inactivation of surfactant that occurs with various lung injuries. PMID:18065212

  19. [Secondary hyperoxaluria and nephrocalcinosis due to ethylene glycol poisoning].

    PubMed

    Monet, C; Richard, E; Missonnier, S; Rebouissoux, L; Llanas, B; Harambat, J

    2013-08-01

    We report the case of a 3-year-old boy admitted to the pediatric emergency department for ethylene glycol poisoning. During hospitalization, he presented dysuria associated with crystalluria. Blood tests showed metabolic acidosis with an elevated anion gap. A renal ultrasound performed a few weeks later revealed bilateral medullary hyperechogenicity. Urine microscopic analysis showed the presence of weddellite crystals. Secondary nephrocalcinosis due to ethylene glycol intoxication was diagnosed. Hyperhydration and crystallization inhibition by magnesium citrate were initiated. Despite this treatment, persistent weddellite crystals and nephrocalcinosis were seen more than 2years after the intoxication. Ethylene glycol is metabolized in the liver by successive oxidations leading to its final metabolite, oxalic acid. Therefore, metabolic acidosis with an elevated anion gap is usually found following ethylene glycol intoxication. Calcium oxalate crystal deposition may occur in several organs, including the kidneys. The precipitation of calcium oxalate in renal tubules can lead to nephrocalcinosis and acute kidney injury. The long-term renal prognosis is related to chronic tubulointerstitial injury caused by nephrocalcinosis. Treatment of ethylene glycol intoxication is based on specific inhibitors of alcohol dehydrogenase and hemodialysis in the most severe forms, and should be started promptly. PMID:23827374

  20. Comparison of Ethylene Glycol and Propylene Glycol for the Vitrification of Immature Porcine Oocytes

    PubMed Central

    SOMFAI, Tamás; NAKAI, Michiko; TANIHARA, Fuminori; NOGUCHI, Junko; KANEKO, Hiroyuki; KASHIWAZAKI, Naomi; EGERSZEGI, István; NAGAI, Takashi; KIKUCHI, Kazuhiro

    2013-01-01

    Abstract Our aim was to optimize a cryoprotectant treatment for vitrification of immature porcine cumulus-oocyte complexes (COCs). Immature COCs were vitrified either in 35% ethylene glycol (EG), 35% propylene glycol (PG) or a combination of 17.5% EG and 17.5% PG. After warming, the COCs were in vitro matured (IVM), and surviving oocytes were in vitro fertilized (IVF) and cultured. The mean survival rate of vitrified oocytes in 35% PG (73.9%) was higher (P<0.05) than that in 35% EG (27.8%). Oocyte maturation rates did not differ among vitrified and non-vitrified control groups. Blastocyst formation in the vitrified EG group (10.8%) was higher (P<0.05) than that in the vitrified PG group (2.0%) but was lower than that in the control group (25.0%). Treatment of oocytes with 35% of each cryoprotectant without vitrification revealed a higher toxicity of PG on subsequent blastocyst development compared with EG. The combination of EG and PG resulted in 42.6% survival after vitrification. The maturation and fertilization rates of the surviving oocytes were similar in the vitrified, control and toxicity control (TC; treated with EG+PG combination without cooling) groups. Blastocyst development in the vitrified group was lower (P<0.05) than that in the control and TC groups, which in turn had similar development rates (10.7%, 18.1% and 23.3%, respectively). In conclusion, 35% PG enabled a higher oocyte survival rate after vitrification compared with 35% EG. However, PG was greatly toxic to oocytes. The combination of 17.5% EG and 17.5% PG yielded reasonable survival rates without toxic effects on embryo development. PMID:23666455

  1. Fluorescein prototropism within poly(ethylene glycol)s and their aqueous mixtures.

    PubMed

    Bhagi, Ambika; Pandey, Shubha; Pandey, Ashish; Pandey, Siddharth

    2013-05-01

    Depending on the solubilizing milieu and conditions, fluorescein may exist in one or more of its many prototropic forms [cationic, neutral (zwitterionic, quinoid, and lactone), monoanionic (phenolate and carboxylate), and dianionic]. Fluorescein prototropism is investigated in liquid poly(ethylene glycol)s (PEGs) of different average molecular weight (MW) and their aqueous mixtures using UV-vis absorbance along with static and time-resolved fluorescence spectroscopic techniques. Information regarding various prototropic forms of fluorescein in up to 30 wt % different average MW PEG-added aqueous buffers at varying pH reveals that addition of PEG causes lactonization of fluorescein in the milieu; higher the average MW of PEG, the more the lactonization is. Neat PEG200, PEG400, and PEG600 are found to support the dianionic form of fluorescein, while PEG1000 supports the neutral lactonized form. It is demonstrated that various prototropic forms of fluorescein may be generated within PEGs by addition of adequate amounts of acidic aqueous buffer. Significant bathochromic shift in absorbance and fluorescence band maxima of dianionic fluorescein as concentration of PEG200 is increased correlates well with hydrogen bond accepting basicity, hydrogen bond donating acidity, and dipolarity/polarizability of the aqueous PEG200 mixture. Interestingly, fluorescence emission from the cationic form of fluorescein is observed from dilute aqueous acidic media in the presence of high concentration of PEG200, whereas the fluorescence emission from cation in the absence of PEG200 is observed only from aqueous solutions of very high acidity (>5 M [H(+)]). Excited-state intensity decay is also used to support this outcome. It is proposed that, in the presence of a small amount of acid in PEG200, a highly acidic water-rich solvation microenvironment is formed around fluorescein, which converts its dianionic form to cationic form and considerably hinders the rapid deprotonation of the

  2. Sources of Propylene Glycol and Glycol Ethers in Air at Home

    PubMed Central

    Choi, Hyunok; Schmidbauer, Norbert; Spengler, John; Bornehag, Carl-Gustaf

    2010-01-01

    Propylene glycol and glycol ether (PGE) in indoor air have recently been associated with asthma and allergies as well as sensitization in children. In this follow-up report, sources of the PGEs in indoor air were investigated in 390 homes of pre-school age children in Sweden. Professional building inspectors examined each home for water damages, mold odour, building’s structural characteristics, indoor temperature, absolute humidity and air exchange rate. They also collected air and dust samples. The samples were analyzed for four groups of volatile organic compounds (VOCs) and semi-VOCs (SVOCs), including summed concentrations of 16 PGEs, 8 terpene hydrocarbons, 2 Texanols, and the phthalates n-butyl benzyl phthalate (BBzP), and di(2-ethylhexyl)phthalate (DEHP). Home cleaning with water and mop ≥ once/month, repainting ≥ one room prior to or following the child’s birth, and “newest” surface material in the child’s bedroom explained largest portion of total variability in PGE concentrations. High excess indoor humidity (g/m3) additionally contributed to a sustained PGE levels in indoor air far beyond several months following the paint application. No behavioral or building structural factors, except for water-based cleaning, predicted an elevated terpene level in air. No significant predictor of Texanols emerged from our analysis. Overall disparate sources and low correlations among the PGEs, terpenes, Texanols, and the phthalates further confirm the lack of confounding in the analysis reporting the associations of the PGE and the diagnoses of asthma, rhinitis, and eczema, respectively. PMID:21318004

  3. Versatile ferrofluids based on polyethylene glycol coated iron oxide nanoparticles

    NASA Astrophysics Data System (ADS)

    Brullot, W.; Reddy, N. K.; Wouters, J.; Valev, V. K.; Goderis, B.; Vermant, J.; Verbiest, T.

    2012-06-01

    Versatile ferrofluids based on polyethylene glycol coated iron oxide nanoparticles were obtained by a facile protocol and thoroughly characterized. Superparamagnetic iron oxide nanoparticles synthesized using a modified forced hydrolysis method were functionalized with polyethylene glycol silane (PEG silane), precipitated and dried. These functionalized particles are dispersable in a range of solvents and concentrations depending on the desired properties. Examples of tunable properties are magnetic behavior, optical and magneto-optical response, thermal features and rheological behavior. As such, PEG silane functionalized particles represent a platform for the development of new materials that have broad applicability in e.g. biomedical, industrial or photonic environments. Magnetic, optical, magneto-optical, thermal and rheological properties of several ferrofluids based on PEG coated particles with different concentrations of particles dispersed in low molecular mass polyethylene glycol were investigated, establishing the applicability of such materials.

  4. Glycol coolants improve heat transfer and corrosion control

    SciTech Connect

    Holfield, R.

    1995-03-01

    Various liquids from plain water to exotic fluids have been used as coolants in large stationary diesel engines that drive compressors on natural gas pipeline distribution systems. Although water is an efficient heat transfer medium, its drawbacks of freezing at {minus}32 F and boiling at 212 F seriously limit its usefulness. Special glycol-based heat transfer fluids are available and refined specifically for long-term needs of gas compressor engines. Appropriate corrosion inhibitors have been formulated for metallurgy and operating conditions encountered with these engines. Propylene glycol was developed as an alternative for use in environmentally sensitive areas. Glycol-based fluids must be specifically inhibited for industrial applications because uninhibited or improperly inhibited coolants can seriously damage reciprocating engines.

  5. Characterization of a monoclonal antibody to thymidine glycol monophosphate

    SciTech Connect

    Chen, B.X.; Hubbard, K.; Ide, H.; Wallace, S.S.; Erlanger, B.F. )

    1990-11-01

    A monoclonal antibody specific for thymine glycol (TG) in irradiated or OsO4-treated DNA was obtained by immunizing with thymidine glycol monophosphate (TMP-glycol) conjugated to bovine serum albumin by a carbodiimide procedure. Screening by dot-immunobinding and enzyme-linked immunosorbant assay (ELISA) procedures gave eight clones that bound OsO4- treated DNA. One of them, 2.6F.6B.6C, an IgG2a kappa, was characterized further. Hapten inhibition studies with OsO4-treated DNA showed that the antibody was specific for TMP-glycol. Among the various inhibitors tested, inhibition was in the order TMP-glycol greater than 5,6-dihydrothymidine phosphate greater than TMP greater than thymidine glycol greater than TG. Inhibition by 5,6-dihydrothymidine, thymidine, thymine, AMP, and CMP was negligible. In OsO4-treated DNA, as few as 0.5 TG per 10,000 bp were detectable by direct ELISA. Inhibition assays could detect as few as 1.5 TG per 10,000 bp. The antibody was equally reactive with native or denatured DNA containing TG. Among the X-irradiated homopolymers dC, dA, dG, and dT, only dT reacted with the antibody. Using an ELISA, the antibody could detect damage in irradiated DNA at the level of 20 Gy. Thus the antibody is of potential use in assays for DNA damage caused by X rays or other agents that damage DNA by free radical interactions.

  6. Molecularly uniform poly(ethylene glycol) certified reference material

    NASA Astrophysics Data System (ADS)

    Takahashi, Kayori; Matsuyama, Shigetomo; Kinugasa, Shinichi; Ehara, Kensei; Sakurai, Hiromu; Horikawa, Yoshiteru; Kitazawa, Hideaki; Bounoshita, Masao

    2015-02-01

    A certified reference material (CRM) for poly(ethylene glycol) with no distribution in the degree of polymerization was developed. The degree of polymerization of the CRM was accurately determined to be 23. Supercritical fluid chromatography (SFC) was used to separate the molecularly uniform polymer from a standard commercial sample with wide polydispersity in its degree of polymerization. Through the use of a specific fractionation system coupled with SFC, we are able to obtain samples of poly(ethylene glycol) oligomer with exact degrees of polymerization, as required for a CRM produced by the National Metrology Institute of Japan.

  7. Glycolic acid production in the engineered yeasts Saccharomyces cerevisiae and Kluyveromyces lactis

    PubMed Central

    2013-01-01

    Background Glycolic acid is a C2 hydroxy acid that is a widely used chemical compound. It can be polymerised to produce biodegradable polymers with excellent gas barrier properties. Currently, glycolic acid is produced in a chemical process using fossil resources and toxic chemicals. Biotechnological production of glycolic acid using renewable resources is a desirable alternative. Results The yeasts Saccharomyces cerevisiae and Kluyveromyces lactis are suitable organisms for glycolic acid production since they are acid tolerant and can grow in the presence of up to 50 g l-1 glycolic acid. We engineered S. cerevisiae and K. lactis for glycolic acid production using the reactions of the glyoxylate cycle to produce glyoxylic acid and then reducing it to glycolic acid. The expression of a high affinity glyoxylate reductase alone already led to glycolic acid production. The production was further improved by deleting genes encoding malate synthase and the cytosolic form of isocitrate dehydrogenase. The engineered S. cerevisiae strain produced up to about 1 g l-1 of glycolic acid in a medium containing d-xylose and ethanol. Similar modifications in K. lactis resulted in a much higher glycolic acid titer. In a bioreactor cultivation with d-xylose and ethanol up to 15 g l-1 of glycolic acid was obtained. Conclusions This is the first demonstration of engineering yeast to produce glycolic acid. Prior to this work glycolic acid production through the glyoxylate cycle has only been reported in bacteria. The benefit of a yeast host is the possibility for glycolic acid production also at low pH, which was demonstrated in flask cultivations. Production of glycolic acid was first shown in S. cerevisiae. To test whether a Crabtree negative yeast would be better suited for glycolic acid production we engineered K. lactis in the same way and demonstrated it to be a better host for glycolic acid production. PMID:24053654

  8. Electrochemical measurements of diffusion coefficients of redox-labeled poly(ethylene glycol) dissolved in poly(ethylene glycol) melts

    SciTech Connect

    Haas, O.; Velazquez, C.S.; Porat, Z.; Murray, R.W.

    1995-10-12

    Ferrocene labeled monomethoxy-poly(ethylene glycol)s (MPEG) with molecular weights of 1900 and 750 were used as redox probe solutes in poly(ethylene glycol) melt solvents of molecular weight 750, 2000, and 20000. Cyclic voltammetry and chronoamperometry at microdisk electrodes were employed to measure the diffusion coefficients of the redox probes, which were independent of the probe concentration and varied between 10{sup -7} and 10{sup -10} cm{sup 2}/s. Diffusional activation barrier results also suggest that the ferrocene label does not significantly influence the diffusivity of the probe molecule in the host solvent. Activation barrier, viscosity, and ionic conductivity results show that the LiClO{sub 4} electrolyte does not influence the diffusion barrier or viscosity as long as the ether O/Li{sup +} ratio is >=250 (ca. 0.1 M) which is still a sufficient electrolyte concentration to allow quantitative electrochemical diffusion measurements. 21 refs., 7 figs., 2 tabs.

  9. Green polymer chemistry VIII: synthesis of halo-ester-functionalized poly(ethylene glycol)s via enzymatic catalysis.

    PubMed

    Castano, Marcela; Seo, Kwang Su; Kim, Eun Hye; Becker, Matthew L; Puskas, Judit E

    2013-09-01

    Halo-ester-functionalized poly(ethylene glycol)s (PEGs) are successfully prepared by the transesterification of alkyl halo-esters with PEGs using Candida antarctica lipase B (CALB) as a biocatalyst under the solventless conditions. Transesterifications of chlorine, bromine, and iodine esters with tetraethylene glycol monobenzyl ether (BzTEG) are quantitative in less than 2.5 h. The transesterification of halo-esters with PEGs are complete in 4 h. (1) H and (13) C NMR spectroscopy with MALDI-ToF and ESI mass spectrometry confirm the structure and purity of the products. This method provides a convenient and "green" process to effectively produce halo-ester PEGs. PMID:23877930

  10. Comparative acute and subchronic toxicity of ethylene glycol monopropyl ether and ethylene glycol monopropyl ether acetate.

    PubMed Central

    Katz, G V; Krasavage, W J; Terhaar, C J

    1984-01-01

    The acute toxicity of ethylene glycol monopropyl ether (EGPE) and ethylene glycol monopropyl ether acetate (EGPEA) was determined in a series of standardized tests. The oral LD50 in rats was 3089 and 9456 mg/kg EGPE and EGPEA, respectively. Skin irritation was slight following an occluded single dose application of either compound to the guinea pig abdomen. The dermal LD50 for guinea pigs was 1 to 5 mL/kg and greater than 20 mL/kg EGPE and EGPEA, respectively. EGPE produced a very weak positive sensitization response in one of five guinea pigs. No positive response was elicited when 10 guinea pigs were similarly challenged with EGPEA. EGPE produced transient moderate to severe eye irritation in rabbits while EGPEA produced slight eye irritation. Subchronic toxicity was determined in a series of oral and inhalation studies. Groups of 10 male rats were dosed with 15, 7.5, 3.75 or 1.88 mmole/kg EGPE and 30, 15 or 7.5 mmole/kg EGPEA by gavage 5 days/week for 6 weeks. Hemoglobinuria was seen at least once at all dose levels of both compounds. EGPE had little effect on feed consumption or body weight gain, while body weight gain was reduced in the two high dose groups exposed to EGPEA and feed consumption was reduced at all dose levels. Hematologic changes were seen at all dose levels of both compounds. Absolute and/or relative spleen weights were increased at all but the lowest EGPE dose level and at all EGPEA dose levels. Gross and histopathologic examinations revealed significant effects on the spleen of animals exposed to EGPE and on the spleen, liver, kidney and testes of animals exposed to EGPEA. The no-observed effect level (NOEL) for splenic changes was 1.88 mmole/kg EGPE. A NOEL for hematology was not established. The NOEL for liver and testicular changes were 15 and 7.5 mmole/kg EGPEA, respectively while a NOEL for hematologic, splenic and renal changes was not established. Groups of 10 rats (5M, 5F) were exposed to 800, 400, 200 or 100 ppm EGPE or EGPEA 6 hr

  11. Insight into the formation of magnetite mesocrystals from ferrous precursors in ethylene glycol.

    PubMed

    Wan, Jiaqi; Tang, Jing; Zhang, Chongyu; Yuan, Ruiting; Chen, Kezheng

    2015-11-14

    Uniform magnetite mesocrystals were fabricated by solvothermal treatment of ferrous chloride in ethylene glycol in the presence of sodium hydroxide. The formation mechanism of magnetite mesocrystals in ethylene glycol was deduced by a time-dependent experiment. PMID:26255597

  12. 21 CFR 173.220 - 1,3-Butylene glycol.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false 1,3-Butylene glycol. 173.220 Section 173.220 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Solvents, Lubricants, Release Agents and Related Substances § 173.220...

  13. 21 CFR 172.712 - 1,3-Butylene glycol.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false 1,3-Butylene glycol. 172.712 Section 172.712 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Other Specific Usage Additives § 172.712...

  14. 21 CFR 173.220 - 1,3-Butylene glycol.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true 1,3-Butylene glycol. 173.220 Section 173.220 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Solvents, Lubricants, Release Agents and...

  15. 21 CFR 173.220 - 1,3-Butylene glycol.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false 1,3-Butylene glycol. 173.220 Section 173.220 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Solvents, Lubricants, Release Agents...

  16. 21 CFR 178.3940 - Tetraethylene glycol di-(2-ethylhexoate).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Tetraethylene glycol di-(2-ethylhexoate). 178.3940 Section 178.3940 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND SANITIZERS Certain Adjuvants...

  17. 21 CFR 172.858 - Propylene glycol alginate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Propylene glycol alginate. 172.858 Section 172.858 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Multipurpose Additives §...

  18. Enzymatic remediated biodegradation of propylene glycol 1,2-dinitrate

    SciTech Connect

    Meng, M.; Geelhaar, L.; Speedie, M.K.

    1995-12-31

    Two bacterial species, Enterobacter agglomerans and Bacillus thuringiensis/cereus, which were selected from nitroglycerin (GTN) contaminated soil, have previously been shown to have denitrating ability on nitroglycerin. This abstract presents the investigation of the cell free extracts from both microorganisms for the degradation of another nitrate ester contaminant; propylene glycol 1,2-dinitrate (PGDN). This compound has been previously considered resistant to the biodegradation. In order to probe the pathway, the whole process was monitored by using [1-{sup 14}C]-PGDN as substrate and the intermediates were identified by HPLC and TLC chromatography. Long term biodegradation experiments have shown that the enzymes in the cytoplasm fraction of Bacillus thuringiensis/cereus and the membrane fraction of Enterobacter agglomerans convert PGDN successively into propylene glycol 1-mononitrate (1-PGMN) and propylene glycol 2-mononitrate (2-PGMN), and finally, propylene glycol. The capacity to achieve sequential and complete degradation of PGDN implies that it follows a similar mechanism to that observed in the GTN degradation. Cofactor requirements for PGDN breakdown have been studied, it was found that no dissociable, dialyzable cofactors are required.

  19. Direct Routes from Synthesis Gas to Ethylene Glycol.

    ERIC Educational Resources Information Center

    Dombek, B. D.

    1986-01-01

    Discusses the synthesis of ethylene glycol from carbon monoxide and hydrogen using bimetallic catalysts. Although this technology has not been implemented, it illustrates two important future trends, namely, use of bimetallic catalysts and use of coal-derived carbon monoxide and hydrogen as a new feed stock. (JN)

  20. Ethylene glycol toxicosis in adult beef cattle fed contaminated feeds

    PubMed Central

    Barigye, Robert; Mostrom, Michelle; Dyer, Neil W.; Newell, Teresa K.; Lardy, Gregory P.

    2008-01-01

    Acute deaths of cows held in a drylot and fed several crop processing plant by-products were investigated. Clinical signs in affected cows included diarrhea, ataxia, recumbency, hypersalivation, and sunken eyes. A histological diagnosis of ethylene glycol toxicosis, based on numerous birefringent crystals in renal tubules, was supported by toxicologic findings. PMID:19119372

  1. 21 CFR 173.220 - 1,3-Butylene glycol.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false 1,3-Butylene glycol. 173.220 Section 173.220 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Solvents, Lubricants, Release Agents...

  2. Processes and systems for the production of propylene glycol from glycerol

    DOEpatents

    Frye, John G; Oberg, Aaron A; Zacher, Alan H

    2015-01-20

    Processes and systems for converting glycerol to propylene glycol are disclosed. The glycerol feed is diluted with propylene glycol as the primary solvent, rather than water which is typically used. The diluted glycerol feed is sent to a reactor where the glycerol is converted to propylene glycol (as well as other byproducts) in the presence of a catalyst. The propylene glycol-containing product from the reactor is recycled as a solvent for the glycerol feed.

  3. A rapid analysis of plasma/serum ethylene and propylene glycol by headspace gas chromatography.

    PubMed

    Ehlers, Alexandra; Morris, Cory; Krasowski, Matthew D

    2013-12-01

    A rapid headspace-gas chromatography (HS-GC) method was developed for the analysis of ethylene glycol and propylene glycol in plasma and serum specimens using 1,3-propanediol as the internal standard. The method employed a single-step derivitization using phenylboronic acid, was linear to 200 mg/dL and had a lower limit of quantitation of 1 mg/dL suitable for clinical analyses. The analytical method described allows for laboratories with HS-GC instrumentation to analyze ethanol, methanol, isopropanol, ethylene glycol, and propylene glycol on a single instrument with rapid switch-over from alcohols to glycols analysis. In addition to the novel HS-GC method, a retrospective analysis of patient specimens containing ethylene glycol and propylene glycol was also described. A total of 36 patients ingested ethylene glycol, including 3 patients who presented with two separate admissions for ethylene glycol toxicity. Laboratory studies on presentation to hospital for these patients showed both osmolal and anion gap in 13 patients, osmolal but not anion gap in 13 patients, anion but not osmolal gap in 8 patients, and 1 patient with neither an osmolal nor anion gap. Acidosis on arterial blood gas was present in 13 cases. Only one fatality was seen; this was a patient with initial serum ethylene glycol concentration of 1282 mg/dL who died on third day of hospitalization. Propylene glycol was common in patients being managed for toxic ingestions, and was often attributed to iatrogenic administration of propylene glycol-containing medications such as activated charcoal and intravenous lorazepam. In six patients, propylene glycol contributed to an abnormally high osmolal gap. The common presence of propylene glycol in hospitalized patients emphasizes the importance of being able to identify both ethylene glycol and propylene glycol by chromatographic methods. PMID:23741644

  4. 21 CFR 172.856 - Propylene glycol mono- and diesters of fats and fatty acids.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Propylene glycol mono- and diesters of fats and... CONSUMPTION Multipurpose Additives § 172.856 Propylene glycol mono- and diesters of fats and fatty acids. Propylene glycol mono- and diesters of fats and fatty acids may be safely used in food, subject to...

  5. Simulated Waste Testing Of Glycolate Impacts On The 2H-Evaporator System

    SciTech Connect

    Martino, C. J.

    2013-08-13

    Glycolic acid is being studied as a total or partial replacement for formic acid in the Defense Waste Processing Facility (DWPF) feed preparation process. After implementation, the recycle stream from DWPF back to the high-level waste tank farm will contain soluble sodium glycolate. Most of the potential impacts of glycolate in the tank farm were addressed via a literature review, but several outstanding issues remained. This report documents the non-radioactive simulant tests impacts of glycolate on storage and evaporation of Savannah River Site high-level waste. The testing for which non-radioactive simulants could be used involved the following: the partitioning of glycolate into the evaporator condensate, the impacts of glycolate on metal solubility, and the impacts of glycolate on the formation and dissolution of sodium aluminosilicate scale within the evaporator. The following are among the conclusions from this work: Evaporator condensate did not contain appreciable amounts of glycolate anion. Of all tests, the highest glycolate concentration in the evaporator condensate was 0.38 mg/L. A significant portion of the tests had glycolate concentration in the condensate at less than the limit of quantification (0.1 mg/L). At ambient conditions, evaporator testing did not show significant effects of glycolate on the soluble components in the evaporator concentrates. Testing with sodalite solids and silicon containing solutions did not show significant effects of glycolate on sodium aluminosilicate formation or dissolution.

  6. 21 CFR 178.3750 - Polyethylene glycol (mean molecular weight 200-9,500).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Polyethylene glycol (mean molecular weight 200-9..., PRODUCTION AIDS, AND SANITIZERS Certain Adjuvants and Production Aids § 178.3750 Polyethylene glycol (mean molecular weight 200-9,500). Polyethylene glycol identified in this section may be safely used as...

  7. 21 CFR 178.3750 - Polyethylene glycol (mean molecular weight 200-9,500).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Polyethylene glycol (mean molecular weight 200-9..., PRODUCTION AIDS, AND SANITIZERS Certain Adjuvants and Production Aids § 178.3750 Polyethylene glycol (mean molecular weight 200-9,500). Polyethylene glycol identified in this section may be safely used as...

  8. 21 CFR 573.800 - Polyethylene glycol (400) mono- and dioleate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Polyethylene glycol (400) mono- and dioleate. 573... DRINKING WATER OF ANIMALS Food Additive Listing § 573.800 Polyethylene glycol (400) mono- and dioleate. (a) The food additive polyethylene glycol (400) mono- and dioleate meets the following...

  9. 21 CFR 573.800 - Polyethylene glycol (400) mono- and dioleate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Polyethylene glycol (400) mono- and dioleate. 573... DRINKING WATER OF ANIMALS Food Additive Listing § 573.800 Polyethylene glycol (400) mono- and dioleate. (a) The food additive polyethylene glycol (400) mono- and dioleate meets the following...

  10. 21 CFR 573.800 - Polyethylene glycol (400) mono- and dioleate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Polyethylene glycol (400) mono- and dioleate. 573... DRINKING WATER OF ANIMALS Food Additive Listing § 573.800 Polyethylene glycol (400) mono- and dioleate. (a) The food additive polyethylene glycol (400) mono- and dioleate meets the following...

  11. 40 CFR 63.1275 - Glycol dehydration unit process vent standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 12 2014-07-01 2014-07-01 false Glycol dehydration unit process vent... Storage Facilities § 63.1275 Glycol dehydration unit process vent standards. (a) This section applies to each glycol dehydration unit subject to this subpart that must be controlled for air emissions...

  12. 40 CFR 63.765 - Glycol dehydration unit process vent standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 11 2012-07-01 2012-07-01 false Glycol dehydration unit process vent... Facilities § 63.765 Glycol dehydration unit process vent standards. (a) This section applies to each glycol dehydration unit subject to this subpart with an actual annual average natural gas flowrate equal to...

  13. 40 CFR 63.1275 - Glycol dehydration unit process vent standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 12 2013-07-01 2013-07-01 false Glycol dehydration unit process vent... Storage Facilities § 63.1275 Glycol dehydration unit process vent standards. (a) This section applies to each glycol dehydration unit subject to this subpart that must be controlled for air emissions...

  14. 40 CFR 63.1275 - Glycol dehydration unit process vent standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 12 2012-07-01 2011-07-01 true Glycol dehydration unit process vent... Facilities § 63.1275 Glycol dehydration unit process vent standards. (a) This section applies to each glycol dehydration unit subject to this subpart with an actual annual average natural gas flowrate equal to...

  15. 40 CFR 63.765 - Glycol dehydration unit process vent standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 11 2013-07-01 2013-07-01 false Glycol dehydration unit process vent... Facilities § 63.765 Glycol dehydration unit process vent standards. (a) This section applies to each glycol dehydration unit subject to this subpart that must be controlled for air emissions as specified in...

  16. 40 CFR 63.765 - Glycol dehydration unit process vent standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 11 2014-07-01 2014-07-01 false Glycol dehydration unit process vent... Facilities § 63.765 Glycol dehydration unit process vent standards. (a) This section applies to each glycol dehydration unit subject to this subpart that must be controlled for air emissions as specified in...

  17. 40 CFR 63.1275 - Glycol dehydration unit process vent standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 11 2011-07-01 2011-07-01 false Glycol dehydration unit process vent... Facilities § 63.1275 Glycol dehydration unit process vent standards. (a) This section applies to each glycol dehydration unit subject to this subpart with an actual annual average natural gas flowrate equal to...

  18. 40 CFR 63.1275 - Glycol dehydration unit process vent standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Glycol dehydration unit process vent... Facilities § 63.1275 Glycol dehydration unit process vent standards. (a) This section applies to each glycol dehydration unit subject to this subpart with an actual annual average natural gas flowrate equal to...

  19. 40 CFR 721.10090 - Tertiary amine salt of glycol succinate (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tertiary amine salt of glycol... Specific Chemical Substances § 721.10090 Tertiary amine salt of glycol succinate (generic). (a) Chemical... as tertiary amine salt of glycol succinate (PMN P-01-595) is subject to reporting under this...

  20. 40 CFR 721.10090 - Tertiary amine salt of glycol succinate (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Tertiary amine salt of glycol... Specific Chemical Substances § 721.10090 Tertiary amine salt of glycol succinate (generic). (a) Chemical... as tertiary amine salt of glycol succinate (PMN P-01-595) is subject to reporting under this...

  1. 40 CFR 721.10090 - Tertiary amine salt of glycol succinate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Tertiary amine salt of glycol... Specific Chemical Substances § 721.10090 Tertiary amine salt of glycol succinate (generic). (a) Chemical... as tertiary amine salt of glycol succinate (PMN P-01-595) is subject to reporting under this...

  2. 40 CFR 721.10090 - Tertiary amine salt of glycol succinate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Tertiary amine salt of glycol... Specific Chemical Substances § 721.10090 Tertiary amine salt of glycol succinate (generic). (a) Chemical... as tertiary amine salt of glycol succinate (PMN P-01-595) is subject to reporting under this...

  3. 40 CFR 721.10090 - Tertiary amine salt of glycol succinate (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Tertiary amine salt of glycol... Specific Chemical Substances § 721.10090 Tertiary amine salt of glycol succinate (generic). (a) Chemical... as tertiary amine salt of glycol succinate (PMN P-01-595) is subject to reporting under this...

  4. 21 CFR 500.50 - Propylene glycol in or on cat food.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Propylene glycol in or on cat food. 500.50 Section... Propylene glycol in or on cat food. The Food and Drug Administration has determined that propylene glycol in or on cat food is not generally recognized as safe and is a food additive subject to section 409...

  5. 21 CFR 500.50 - Propylene glycol in or on cat food.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Propylene glycol in or on cat food. 500.50 Section... Propylene glycol in or on cat food. The Food and Drug Administration has determined that propylene glycol in or on cat food is not generally recognized as safe and is a food additive subject to section 409...

  6. 21 CFR 500.50 - Propylene glycol in or on cat food.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Propylene glycol in or on cat food. 500.50 Section... Propylene glycol in or on cat food. The Food and Drug Administration has determined that propylene glycol in or on cat food is not generally recognized as safe and is a food additive subject to section 409...

  7. 21 CFR 500.50 - Propylene glycol in or on cat food.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Propylene glycol in or on cat food. 500.50 Section... Propylene glycol in or on cat food. The Food and Drug Administration has determined that propylene glycol in or on cat food is not generally recognized as safe and is a food additive subject to section 409...

  8. 21 CFR 500.50 - Propylene glycol in or on cat food.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Propylene glycol in or on cat food. 500.50 Section... Propylene glycol in or on cat food. The Food and Drug Administration has determined that propylene glycol in or on cat food is not generally recognized as safe and is a food additive subject to section 409...

  9. Comparison of Polyethylene Glycol-Electrolyte Solution vs Polyethylene Glycol-3350 for the Treatment of Fecal Impaction in Pediatric Patients

    PubMed Central

    Boles, Erin E.; Gaines, Cameryn L.

    2015-01-01

    OBJECTIVES: The objective of this study was to evaluate the safety and efficacy of polyethylene glycol-electrolyte solution vs polyethylene glycol-3350 for the treatment of fecal impaction in pediatric patients. METHODS: A retrospective, observational, institutional review board–approved study was conducted over a 1-year time period. Patients were included in the study if they were admitted to the hospital with a diagnosis of fecal impaction or constipation and were treated with either polyethylene glycol-electrolyte solution (PEG-ES) or polyethylene glycol-3350 (PEG-3350). Patients were excluded if they were discharged prior to resolution of treatment and/or did not receive PEG-ES or PEG-3350. RESULTS: Fifty-one patients (ranging in age from 1 month to 15 years) were evaluated: 23 patients received PEG-ES and 28 patients received PEG-3350. Sex, race, age, and weight were not statistically different between the 2 groups. Resolution of fecal impaction was not significantly different between PEG-ES vs PEG-3350 (87% and 86%, respectively; p = 0.87). There was only 1 reported side effect with PEG-3350, vs 11 reported side effects with PEG-ES (p < 0.01). CONCLUSIONS: Theses results suggest that PEG-3350 is as effective as PEG-ES for the treatment of fecal impaction in pediatric patients and is associated with fewer side effects. PMID:26170773

  10. Efficient utilization of pentoses for bioproduction of the renewable two-carbon compounds ethylene glycol and glycolate.

    PubMed

    Pereira, Brian; Li, Zheng-Jun; De Mey, Marjan; Lim, Chin Giaw; Zhang, Haoran; Hoeltgen, Claude; Stephanopoulos, Gregory

    2016-03-01

    The development of lignocellulose as a sustainable resource for the production of fuels and chemicals will rely on technology capable of converting the raw materials into useful compounds; some such transformations can be achieved by biological processes employing engineered microorganisms. Towards the goal of valorizing the hemicellulose fraction of lignocellulose, we designed and validated a set of pathways that enable efficient utilization of pentoses for the biosynthesis of notable two-carbon products. These pathways were incorporated into Escherichia coli, and engineered strains produced ethylene glycol from various pentoses, including simultaneously from D-xylose and L-arabinose; one strain achieved the greatest reported titer of ethylene glycol, 40 g/L, from D-xylose at a yield of 0.35 g/g. The strategy was then extended to another compound, glycolate. Using D-xylose as the substrate, an engineered strain produced 40 g/L glycolate at a yield of 0.63 g/g, which is the greatest reported yield to date. PMID:26711083

  11. Cementitious building material incorporating end-capped polyethylene glycol as a phase change material

    DOEpatents

    Salyer, Ival O.; Griffen, Charles W.

    1986-01-01

    A cementitious composition comprising a cementitious material and polyethylene glycol or end-capped polyethylene glycol as a phase change material, said polyethylene glycol and said end-capped polyethylene glycol having a molecular weight greater than about 400 and a heat of fusion greater than about 30 cal/g; the compositions are useful in making pre-formed building materials such as concrete blocks, brick, dry wall and the like or in making poured structures such as walls or floor pads; the glycols can be encapsulated to reduce their tendency to retard set.

  12. Oxidation of glycerol to glycolate by using supported gold and palladium nanoparticles.

    PubMed

    Sankar, Meenakshisundaram; Dimitratos, Nikolaos; Knight, David W; Carley, Albert F; Tiruvalam, Ramchandra; Kiely, Christopher J; Thomas, Damian; Hutchings, Graham J

    2009-01-01

    Glycolic acid is an important chemical that has uses as a cleaning agent as well as a chemical intermediate. At present glycolic acid is manufactured from either chloroacetic acid or from formaldehyde hydrocyanation, both routes being nongreen and using nonsustainable resources. We investigate the possibility of producing glycolate from the oxidation of glycerol, a sustainable raw material. We show that by using 1 % wt Au/carbon catalysts prepared using a sol-immobilization method glycolate yields of ca. 60 % can be achieved, using hydrogen peroxide as oxidant in an autoclave reactor. We describe and discuss the reaction mechanism and consider the reaction conditions that maximize the formation of glycolate. PMID:19830778

  13. Propylene Glycol Poisoning From Excess Whiskey Ingestion: A Case of High Osmolal Gap Metabolic Acidosis.

    PubMed

    Cunningham, Courtney A; Ku, Kevin; Sue, Gloria R

    2015-01-01

    In this report, we describe a case of high anion gap metabolic acidosis with a significant osmolal gap attributed to the ingestion of liquor containing propylene glycol. Recently, several reports have characterized severe lactic acidosis occurring in the setting of iatrogenic unintentional overdosing of medications that use propylene glycol as a diluent, including lorazepam and diazepam. To date, no studies have explored potential effects of excess propylene glycol in the setting of alcohol intoxication. Our patient endorsed drinking large volumes of cinnamon flavored whiskey, which was likely Fireball Cinnamon Whisky. To our knowledge, this is the first case of propylene glycol toxicity from an intentional ingestion of liquor containing propylene glycol. PMID:26904700

  14. Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles

    SciTech Connect

    Eastman, J. A.; Choi, S. U. S.; Li, S.; Yu, W.; Thompson, L. J.

    2001-02-05

    It is shown that a ''nanofluid'' consisting of copper nanometer-sized particles dispersed in ethylene glycol has a much higher effective thermal conductivity than either pure ethylene glycol or ethylene glycol containing the same volume fraction of dispersed oxide nanoparticles. The effective thermal conductivity of ethylene glycol is shown to be increased by up to 40% for a nanofluid consisting of ethylene glycol containing approximately 0.3 vol% Cu nanoparticles of mean diameter <10 nm. The results are anomalous based on previous theoretical calculations that had predicted a strong effect of particle shape on effective nanofluid thermal conductivity, but no effect of either particle size or particle thermal conductivity.

  15. 40 CFR 721.6045 - Phosphinothioic acid, bis(2,4,4-trimethylpentyl)- (9CI).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for...) The significant new uses are: (i) Release to water. Requirements as specified in § 721.90 (a)(4), (b... containing the substance will be treated using carbon adsorption treatment before release, then the amount...

  16. 40 CFR 721.6045 - Phosphinothioic acid, bis(2,4,4-trimethylpentyl)- (9CI).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for...) The significant new uses are: (i) Release to water. Requirements as specified in § 721.90 (a)(4), (b... containing the substance will be treated using carbon adsorption treatment before release, then the amount...

  17. Vapor Pressure of Aqueous Solutions of Ethylene Glycol

    NASA Astrophysics Data System (ADS)

    Fujita, Toshihiko; Kikuchi, Sakae

    Vapor pressures of aqueous solutions of ethylene glycol are measured in the range of temperature from -10 to 60°C and concentration from 20 to 50wt%. In a low concentration range, the measured values of vapor pressure decrease according to the Raoult's law independent of temperature, while in a high concentration range, they show a trend to decrease towards the estimated values of freezing point with decreasing temperature. The following correlation equation is obtained for practical calculations on heating towers and the like. log(p/P0) = 5.351 - 6.4×10-4y + (1817 + 0.008y(y + 10))/(t + 240) where p, vapor perssure of aqueous solutions of ethylene glycol [kPa] ; P0, atmospheric pressure [=101.325kPa] ; y, concentration [wt%] ; t, temperature [°C].

  18. Glycol Chitosan-Based Fluorescent Theranostic Nanoagents for Cancer Therapy

    PubMed Central

    Rhee, Jin-Kyu; Park, Ok Kyu; Lee, Aeju; Yang, Dae Hyeok; Park, Kyeongsoon

    2014-01-01

    Theranostics is an integrated nanosystem that combines therapeutics with diagnostics in attempt to develop new personalized treatments with enhanced therapeutic efficacy and safety. As a promising therapeutic paradigm with cutting-edge technologies, theranostic agents are able to simultaneously deliver therapeutic drugs and diagnostic imaging agents and also monitor the response to therapy. Polymeric nanosystems have been intensively explored for biomedical applications to diagnose and treat various cancers. In recent years, glycol chitosan-based nanoagents have been developed as dual-purpose materials for simultaneous diagnosis and therapy. They have shown great potential in cancer therapies, such as chemotherapeutics and nucleic acid and photodynamic therapies. In this review, we summarize the recent progress and potential applications of glycol chitosan-based fluorescent theranostic nanoagents for cancer treatments and discuss their possible underlying mechanisms. PMID:25522316

  19. Acute and subchronic toxicity of ethylene glycol monobutyl ether.

    PubMed Central

    Tyler, T R

    1984-01-01

    The available information on the acute and subchronic toxicity of ethylene glycol monobutyl ether is reviewed. Data from animal studies have been examined from the standpoint of dose-response relationships and the sensitivity of various animal species, including man, to the effects of this chemical. In view of recent findings with other chemically related glycol ethers, particular attention has been given to possible adverse effects on blood and testicular tissue. In evaluating the hazard that this chemical may pose to man, consideration has been given to likely routes of exposure and its irritant properties. It is concluded that the available information continues to support the current ACGIH TWA8-TLV of 25 ppm with a STEL of 75 ppm. PMID:6499803

  20. Comparative toxicity of formulated glycol deicers and pure ethylene and propylene glycol to Ceriodaphnia dubia and Pimephales promelas

    SciTech Connect

    Pillard, D.A. )

    1995-02-01

    Airlines use deicers to remove ice and snow from aircraft before flights, and to retard the inflight buildup of these materials. Many of the deicers are formulated mixtures of ethylene glycol (EG) or propylene glycol (PG) and a variety of additives. Because these deicers may be intentionally or accidentally released into aquatic ecosystems, the possibility exists for direct and indirect adverse effects on aquatic organisms. Laboratory studies evaluated the comparative toxicity of formulated glycol deicers and pure materials on the water flea, Ceriodaphnia dubia, and fathead minnow, Pimephales promelas. Acute and short-term chronic tests were performed according to US Environmental Protection Agency (EPA) guidelines. The formulated mixtures were found to be substantially more toxic than either of the pure glycol materials. The 48-h LC50s for C. dubia were 13,140 mg/L and 1,020 mg/L using formulated EG and PG, and 34,400 mg/L and 18,340 mg/L using pure EG and PG, respectively. The 96-h LC50s for P. promelas were 8,050 mg/L and 710 mg/L using formulated EG and PG, and 72,860 mg/L and 55,770 mg/L using pure EG and PG, respectively. Chronic IC25s for C. dubia were 3,960 mg/L and 640 mg/L using formulated EG and PG; 12,310 mg/L and 13,470 mg/L using pure EG and PG. Chronic IC25s for P. promelas were 3,660 mg/L and 110 mg/L using formulated EG and PG; 22,520 mg/L and 6,940 mg/L using pure EG and PG. For airports that have stormwater discharge permits, numerical limits for EG and PG are generally listed; potential toxicity is assumed to be due to the glycol materials. However, other compounds in the mixtures may either contribute substantially to, or in some cases overshadow, the toxicity of the glycol materials.

  1. Thermal stability of collagen fibers in ethylene glycol.

    PubMed

    Miles, C A; Burjanadze, T V

    2001-03-01

    The mechanism that renders collagen molecules more stable when precipitated as fibers than the same molecules in solution is controversial. According to the polymer-melting mechanism the presence of a solvent depresses the melting point of the polymer due to a thermodynamic mechanism resembling the depression of the freezing point of a solvent due to the presence of a solute. On the other hand, according to the polymer-in-a-box mechanism, the change in configurational entropy of the collagen molecule on denaturation is reduced by its confinement by surrounding molecules in the fiber. Both mechanisms predict an approximately linear increase in the reciprocal of the denaturation temperature with the volume fraction (epsilon) of solvent, but the polymer-melting mechanism predicts that the slope is inversely proportional to the molecular mass of the solvent (M), whereas the polymer-in-a-box mechanism predicts a slope that is independent of M. Differential scanning calorimetry was used to measure the denaturation temperature of collagen in different concentrations of ethylene glycol (M = 62) and the slope found to be (7.29 +/- 0.37) x 10(-4) K(-1), compared with (7.31 +/- 0.42) x 10(-4) K(-1) for water (M = 18). This behavior was consistent with the polymer-in-a-box mechanism but conflicts with the polymer-melting mechanism. Calorimetry showed that the enthalpy of denaturation of collagen fibers in ethylene glycol was high, varied only slowly within the glycol volume fraction range 0.2 to 1, and fell rapidly at low epsilon. That this was caused by the disruption of a network of hydrogen-bonded glycol molecules surrounding the collagen is the most likely explanation. PMID:11222308

  2. Polyethylene Glycol (PEG)-Induced Anaphylactic Reaction During Bowel Preparation

    PubMed Central

    2015-01-01

    Barium enema is used to screen patients with gastrointestinal bleeding who do not want to undergo colonoscopy. Polyethylene glycol (PEG) is usually the bowel preparation of choice. Few allergic reactions from this product have been reported; these include urticaria, angioedema, and anaphylaxis. Reactions are thought to result from a small amount of PEG crossing the intestinal mucosa, which, in some patients, is sufficient to provoke an anaphylactic reaction. PMID:26203443

  3. Synthesis and properties of oligodeoxyribonucleotide-polyethylene glycol conjugates.

    PubMed Central

    Jäschke, A; Fürste, J P; Nordhoff, E; Hillenkamp, F; Cech, D; Erdmann, V A

    1994-01-01

    Pools of oligonucleotide conjugates consisting of 10-400 different molecular species were synthesized. The conjugates contained a varying number of ethylene glycol units attached to 3'-terminal, 5'-terminal and internal positions of the oligonucleotides. Conjugate synthesis was performed by phosphoramidite solid phase chemistry using suitably protected polyethylene glycol phosphoramidites and PEG-derivatized solid supports containing polydisperse PEGs of various molecular weight ranges. The pools were analyzed and fractionated by chromatographic and electrophoretic techniques, and the composition of isolated conjugates was revealed by matrix-assisted laser desorption/ionization mass spectrometry. The number and attachment sites of coupled ethylene glycol units greatly influence the hydrophobicity of the conjugates, as well as their electrophoretic mobilities. Conjugation had little effect on the hybridization behavior of oligonucleotide conjugates with unmodified complementary oligonucleotide strands. Melting temperatures were between 67 and 73 degrees C, depending on the size and number of coupled PEG chains, compared to 68 degrees C for the unmodified duplex. Conjugates with PEG coupled to both 3'- and 5'-terminal positions showed a more than 10-fold increase in exonuclease stability. PMID:7984434

  4. Glycolic acid peel therapy – a current review

    PubMed Central

    Sharad, Jaishree

    2013-01-01

    Chemical peels have been time-tested and are here to stay. Alpha-hydroxy peels are highly popular in the dermatologist’s arsenal of procedures. Glycolic acid peel is the most common alpha-hydroxy acid peel, also known as fruit peel. It is simple, inexpensive, and has no downtime. This review talks about various studies of glycolic acid peels for various indications, such as acne, acne scars, melasma, postinflammatory hyperpigmentation, photoaging, and seborrhea. Combination therapies and treatment procedure are also discussed. Careful review of medical history, examination of the skin, and pre-peel priming of skin are important before every peel. Proper patient selection, peel timing, and neutralization on-time will ensure good results, with no side effects. Depth of the glycolic acid peel depends on the concentration of the acid used, the number of coats applied, and the time for which it is applied. Hence, it can be used as a very superficial peel, or even a medium depth peel. It has been found to be very safe with Fitzpatrick skin types I–IV. All in all, it is a peel that is here to stay. PMID:24399880

  5. Effect of Short Chain Poly(ethylene glycol)s on the Hydration Structure and Dynamics around Human Serum Albumin.

    PubMed

    Samanta, Nirnay; Luong, Trung Quan; Das Mahanta, Debasish; Mitra, Rajib Kumar; Havenith, Martina

    2016-01-26

    We report the changes in the hydration dynamics around a globular protein, human serum albumin (HSA), in the presence of two short chain crowding agents, namely poly(ethylene glycol)s (PEG 200 and 400). The change in the network water structure is investigated using FTIR spectroscopy in the far-infrared (FIR) frequency range. Site specific changes are obtained by time-resolved fluorescence spectroscopic technique using the intrinsic fluorophore tryptophan (Trp214) of HSA. The collective hydration dynamics of HSA in the presence of PEG molecules are obtained using terahertz (THz) time domain spectroscopy (TTDS) and high intensity p-Ge THz measurements. Our study affirms a considerable perturbation of HSA hydration beyond a critical concentration of PEG. PMID:26720549

  6. Pressure and temperature dependence of excess enthalpies of methanol + tetraethylene glycol dimethyl ether and methanol + polyethylene glycol dimethyl ether 250

    SciTech Connect

    Lopez, E.R.; Coxam, J.Y.; Fernandez, J.; Grolier, J.P.E.

    1999-12-01

    The excess molar enthalpies at 323.15 K, 373.15 K, and 423.15 K, at 8 MPa, are reported for the binary mixtures methanol + tetraethylene glycol dimethyl ether (TEGDME) and methanol + poly(ethylene glycol) dimethyl ether 250 (PEGDME 250). Excess molar enthalpies were determined with a Setaram C-80 calorimeter equipped with a flow mixing cell. For both systems, the excess enthalpies are positive over the whole composition range, increasing with temperature. The H{sup E}(x) curves are slightly asymmetrical, and their maxima are skewed toward the methanol-rich region. The excess enthalpies slightly change with the pressure, the sign of this change being composition-dependent. In the case of mixtures with TEGDME, the experimental H{sup E} values have been compared with those predicted with the Gmehling et al. version of UNIFAC (Dortmund) and the Nitta-Chao and DISQUAC group contribution models.

  7. Ultrasound responsive block copolymer micelle of poly(ethylene glycol)-poly(propylene glycol) obtained through click reaction.

    PubMed

    Li, Fayong; Xie, Chuan; Cheng, Zhengang; Xia, Hesheng

    2016-05-01

    The well-defined amphiphilic poly(ethylene glycol)-block-poly(propylene glycol) copolymer containing 1, 2, 3-triazole moiety and multiple ester bonds (PEG-click-PPG) was prepared by click reaction strategy. The PEG-click-PPG copolymer can self-assemble into spherical micelles in aqueous solution. It is found that high intensity focused ultrasound (HIFU) can open the copolymer PEG-click-PPG micelles and trigger the release of the payload in the micelle. The multiple ester bonds introduced in the junction point of the copolymer chain through click reactions were cleaved under HIFU, and leads to the disruption of the copolymer micelle and fast release of loaded cargo. The click reaction provides a convenient way to construct ultrasound responsive copolymer micelles with weak bonds. PMID:26703197

  8. 40 CFR 721.1729 - Boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Boric acid (H3BO3), mixed esters with... identified as boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol... NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.1729...

  9. 40 CFR 721.1729 - Boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Boric acid (H3BO3), mixed esters with... identified as boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol... NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.1729...

  10. 40 CFR 721.1729 - Boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Boric acid (H3BO3), mixed esters with... identified as boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol... NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.1729...

  11. 40 CFR 721.1729 - Boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Boric acid (H3BO3), mixed esters with... identified as boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol... NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.1729...

  12. 40 CFR 721.1729 - Boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Boric acid (H3BO3), mixed esters with... identified as boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol... NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.1729...

  13. Effect of tocopheryl polyethylene glycol succinate on the percutaneous penetration of minoxidil from water/ethanol/polyethylene glycol 400 solutions.

    PubMed

    Sheu, Ming-Thau; Wu, An-Bang; Lin, Keng-Ping; Shen, Chao-Hui; Ho, Hsiu-O

    2006-06-01

    We described to achieve the local retention of minoxidil which has penetrated the skin with minimization of its absorption into the general circulation and elimination of local irritation induced by propylene glycol. The effect of tocopheryl polyethylene glycol succinate (TPGS) on the penetration flux of minoxidil and its retention in the skin from topical minoxidil formulations consisting of water, alcohol, and polyethylene glycol 400 was characterized by an experimental design of ten solvent formulations in this study. Results show that the addition of TPGS was only able to improve the solubility of minoxidil in those solvent systems containing higher proportions of water and PEG 400, and the extent of improvement was also more profound with the addition of TPGS at concentrations higher than 5%. For those solvent systems containing a higher fraction of alcohol, an insignificant change in minoxidil solubility with increasing added amounts of TPGS was noted even with the tendency to decrease the solubility of minoxidil with higher amounts of TPGS. Increasing the amount of TPGS added gradually increased the flux and the corrected flux from solvent formulations with a lower solubility parameter, but decreased those from solvent systems with a higher solubility parameter. With the addition of TPGS, solvent formulation F6 (alcohol:PEG 400 of 50:50) was demonstrated to be the optimal choice by having an improved local effect and a reduced systemic effect compared to the reference of 2% Regaine((R)). Tocopheryl polyethylene glycol succinate (TPGS) was mainly retained locally in the stratum corneum, and the amount was proportional to the increase in the amount of TPGS added to these ten solvent formulations. PMID:16720414

  14. Anaerobic Biodegradation of Ethylene Glycol within Hydraulic Fracturing Fluid

    NASA Astrophysics Data System (ADS)

    Heyob, K. M.; Mouser, P. J.

    2014-12-01

    Ethylene glycol (EG) is a commonly used organic additive in hydraulic fracturing fluids used for shale gas recovery. Under aerobic conditions, this compound readily biodegrades to acetate and CO2 or is oxidized through the glycerate pathway. In the absence of oxygen, organisms within genera Desulfovibrio, Acetobacterium, and others can transform EG to acetaldehyde, a flammable and suspected carcinogenic compound. Acetaldehyde can then be enzymatically degraded to ethanol or acetate and CO2. However, little is known on how EG degrades in the presence of other organic additives, particularly under anaerobic conditions representative of deep groundwater aquifers. To better understand the fate and attenuation of glycols within hydraulic fracturing fluids we are assessing their biodegradation potential and pathways in batch anaerobic microcosm treatments. Crushed Berea sandstone was inoculated with groundwater and incubated with either EG or a synthetic fracturing fluid (SFF) containing EG formulations. We tracked changes in dissolved organic carbon (DOC), EG, and its transformation products over several months. Approximately 41% of bulk DOC in SFF is degraded within 21 days, with 58% DOC still remaining after 63 days. By comparison, this same SFF degrades by 70% within 25 days when inoculated with sediment-groundwater microbial communities, suggesting that bulk DOC degradation occurs at a slower rate and to a lesser extent with bedrock. Aerobic biodegradation of EG occurs rapidly (3-7 days); however anaerobic degradation of EG is much slower, requiring several weeks for substantial DOC loss to be observed. Ongoing experiments are tracking the degradation pathways of EG alone and in the presence of SFF, with preliminary data showing incomplete glycol transformation within the complex hydraulic fracturing fluid mixture. This research will help to elucidate rates, processes, and pathways for EG biodegradation and identify key microbial taxa involved in its degradation.

  15. Echogenic Glycol Chitosan Nanoparticles for Ultrasound-Triggered Cancer Theranostics

    PubMed Central

    Min, Hyun Su; You, Dong Gil; Son, Sejin; Jeon, Sangmin; Park, Jae Hyung; Lee, Seulki; Kwon, Ick Chan; Kim, Kwangmeyung

    2015-01-01

    Theranostic nanoparticles hold great promise for simultaneous diagnosis of diseases, targeted drug delivery with minimal toxicity, and monitoring of therapeutic efficacy. However, one of the current challenges in developing theranostic nanoparticles is enhancing the tumor-specific targeting of both imaging probes and anticancer agents. Herein, we report the development of tumor-homing echogenic glycol chitosan-based nanoparticles (Echo-CNPs) that concurrently execute cancer-targeted ultrasound (US) imaging and US-triggered drug delivery. To construct this novel Echo-CNPs, an anticancer drug and bioinert perfluoropentane (PFP), a US gas precursor, were simultaneously encapsulated into glycol chitosan nanoparticles using the oil in water (O/W) emulsion method. The resulting Echo-CNPs had a nano-sized particle structure, composing of hydrophobic anticancer drug/PFP inner cores and a hydrophilic glycol chitosan polymer outer shell. The Echo-CNPs had a favorable hydrodynamic size of 432 nm, which is entirely different from the micro-sized core-empty conventional microbubbles (1-10 μm). Furthermore, Echo-CNPs showed the prolonged echogenicity via the sustained microbubble formation process of liquid-phase PFP at the body temperature and they also presented a US-triggered drug release profile through the external US irradiation. Interestingly, Echo-CNPs exhibited significantly increased tumor-homing ability with lower non-specific uptake by other tissues in tumor-bearing mice through the nanoparticle's enhanced permeation and retention (EPR) effect. Conclusively, theranostic Echo-CNPs are highly useful for simultaneous cancer-targeting US imaging and US-triggered delivery in cancer theranostics. PMID:26681985

  16. Kinetic Modeling of Esterification of Ethylene Glycol with Acetic Acid

    NASA Astrophysics Data System (ADS)

    Yadav, Vishnu P.; Mukherjee, Rudra Palash; Bantraj, Kandi; Maity, Sunil K.

    2010-10-01

    The reaction kinetics of the esterification of ethylene glycol with acetic acid in the presence of cation exchange resin has been studied and kinetic models based on empirical and Langmuir approach has been developed. The Langmuir based model involving eight kinetic parameters fits experimental data much better compared to empirical model involving four kinetic parameters. The effect of temperature and catalyst loading on the reaction system has been analyzed. Further, the activation energy and frequency factor of the rate constants for Langmuir based model has been estimated.

  17. Glycol methacrylate in light microscopy: nucleic acid cytochemistry.

    PubMed

    Cole, M B; Ellinger, J

    1981-07-01

    Techniques utilizing Feulgen, azure B bromide, methyl green-pyronin, gallocyanin chromalum and cresyl violet stains have been modified and adapted for visualizing nucleic acids in 0.5-2.0 micrometer sections of tissues embedded in glycol methacrylate (GMA). Methods for evaluating the stain specificity for DNA and RNA using deoxyribonuclease and ribonuclease digestions, aldehyde blocking, and acid extractions are also described. The specificity of the stains in GMA embedded tissues is comparable to that reported for paraffin-embedded tissues. PMID:6167720

  18. Brillouin and Raman Scattering Study of Ethylene Glycol Aqueous Solutions

    NASA Astrophysics Data System (ADS)

    Seshimo, Y.; Ike, Y.; Kojima, S.

    2008-02-01

    We studied the cluster structure of ethylene glycol aqueous solutions by Brillouin and Raman scattering. We measured the ultrasonic sound velocity of the sample by Brillouin scattering. From the concentration dependence of the sound velocity, we studied the cluster structure in the solution. We showed that the number of H2O molecule neighboring a EG molecule becomes a little higher with increasing temperature and the intermolecular interaction between EG and H2O molecules weakened with increasing temperature. In Raman scattering study, We studied the hydrogen bond in the solution using the OD stretching band. We revealed that the strength of the hydrogen bond is independent of the EG concentration.

  19. Effective Antisense Gene Regulation via Noncationic, Polyethylene Glycol Brushes.

    PubMed

    Lu, Xueguang; Jia, Fei; Tan, Xuyu; Wang, Dali; Cao, Xueyan; Zheng, Jiamin; Zhang, Ke

    2016-07-27

    Negatively charged nucleic acids are often complexed with polycationic transfection agents before delivery. Herein, we demonstrate that a noncationic, biocompatible polymer, polyethylene glycol, can be used as a transfection vector by forming a brush polymer-DNA conjugate. The brush architecture provides embedded DNA strands with enhanced nuclease stability and improved cell uptake. Because of the biologically benign nature of the polymer component, no cytotoxicity was observed. This approach has the potential to address several long-lasting challenges in oligonucleotide therapeutics. PMID:27420413

  20. Kinetic Modeling of Esterification of Ethylene Glycol with Acetic Acid

    SciTech Connect

    Yadav, Vishnu P.; Maity, Sunil K.; Mukherjee, Rudra Palash; Bantraj, Kandi

    2010-10-26

    The reaction kinetics of the esterification of ethylene glycol with acetic acid in the presence of cation exchange resin has been studied and kinetic models based on empirical and Langmuir approach has been developed. The Langmuir based model involving eight kinetic parameters fits experimental data much better compared to empirical model involving four kinetic parameters. The effect of temperature and catalyst loading on the reaction system has been analyzed. Further, the activation energy and frequency factor of the rate constants for Langmuir based model has been estimated.

  1. Polyethylene glycol-based homologated ligands for nicotinic acetylcholine receptors☆

    PubMed Central

    Scates, Bradley A.; Lashbrook, Bethany L.; Chastain, Benjamin C.; Tominaga, Kaoru; Elliott, Brandon T.; Theising, Nicholas J.; Baker, Thomas A.; Fitch, Richard W.

    2010-01-01

    A homologous series of polyethylene glycol (PEG) monomethyl ethers were conjugated with three ligand series for nicotinic acetylcholine receptors. Conjugates of acetylaminocholine, the cyclic analog 1-acetyl-4,4-dimethylpiperazinium, and pyridyl ether A-84543 were prepared. Each series was found to retain significant affinity at nicotinic receptors in rat cerebral cortex with tethers of up to six PEG units. Such compounds are hydrophilic ligands which may serve as models for fluorescent/affinity probes and multivalent ligands for nAChR. PMID:19006672

  2. Solubility of HFC-134a refrigerant in glycol-type compounds: Effects of glycol structure. [1,1,1,2-tetrafluoroethane

    SciTech Connect

    Tseregounis, S.I.; Riley, M.J. . Fuels and Lubricants Dept.)

    1994-04-01

    Environmental concerns have dictated the replacement of CFC-12 refrigerant with HFC-134a in air-conditioning (A/C) systems. Since polyglycols are synthetic compounds compatible with HFC-134a and considered as lubricants for the A/C compressor, interactions of HFC-134a with glycol-type compounds and thermodynamic properties of the solutions are important in designing an A/C system. In this work, the solubility of HFC-134a in four glycol-type compounds was measured at [minus]5 to 80 C and 90 to 960 kPa. HFC-134a had the greatest solubility in tetraethylene glycol dimethyl ether. HFC-134a was less soluble in hexylene glycol and tetraethylene glycol and least soluble in triethylene glycol. Mixtures of HFC-134a with TRIG or TGDE showed phase separation. Solubility data were used to calculate the activity coefficient of HFC-134a in glycol solutions. An equation of the form, ln[gamma][sub r] = (1 [minus] x[sub r])[A + Bx[sub r

  3. Polyethylene glycol plus ascorbic acid for bowel preparation in chronic kidney disease.

    PubMed

    Lee, Jae Min; Keum, Bora; Yoo, In Kyung; Kim, Seung Han; Choi, Hyuk Soon; Kim, Eun Sun; Seo, Yeon Seok; Jeen, Yoon Tae; Chun, Hoon Jai; Lee, Hong Sik; Um, Soon Ho; Kim, Chang Duck; Kim, Myung Gyu; Jo, Sang Kyung

    2016-09-01

    The safety of polyethylene glycol plus ascorbic acid has not been fully investigated in patients with renal insufficiency. High-dose ascorbic acid could induce hyperoxaluria, thereby causing tubule-interstitial nephritis and renal failure. This study aims to evaluate the safety and efficacy of polyethylene glycol plus ascorbic acid in patients with chronic kidney disease.We retrospectively reviewed prospectively collected data on colonoscopy in patients with impaired renal function. Patients were divided into 2 groups: 2 L polyethylene glycol plus ascorbic acid (n = 61) and 4 L polyethylene glycol (n = 80). The safety of the 2 groups was compared by assessing the differences in laboratory findings before and after bowel cleansing.The laboratory findings were not significantly different before and after the administration of 2 L polyethylene glycol plus ascorbic acid or 4 L polyethylene glycol. In both groups, the estimated glomerular filtration rate was not influenced by the administration of the bowel-cleansing agent. Patients' reports on tolerance and acceptability were better in the 2 L polyethylene glycol plus ascorbic acid group than in the 4 L polyethylene glycol group.The 2 L polyethylene glycol plus ascorbic acid solution is a safe choice for bowel preparation before colonoscopy in patients with impaired renal function. PMID:27603372

  4. Syntheses, characterization and fluorescent properties of two triethylene-glycol dicoumarin-3-carboxylates.

    PubMed

    Zhang, Hui; Yu, Tianzhi; Zhao, Yuling; Fan, Duowang; Qian, Long; Yang, Changhui; Zhang, Kai

    2007-11-01

    Two novel triethylene-glycol dicoumarin-3-carboxylates were synthesized and characterized by element analysis, (1)H NMR, FT-IR and UV-vis absorption spectra. The photoluminescent behaviors of triethylene-glycol dibenzo[5,6]coumarin-3-carboxylate doped in PMMA were discussed. These compounds exhibit strong blue emission under ultraviolet light excitation. Compared to coumarin-3-triethylene glycol diester, the absorption and emission spectra of benzo[5,6]coumarin-3-triethylene glycol diester was bathochromically shifted due to the larger conjugation of benzene moiety. These derivatives have potential possible to explore organic electroluminescent materials. PMID:17418628

  5. Gas chromatographic determination of microamounts of glycols and their esters in aqueous medium using adsorption on activated charcoal

    SciTech Connect

    Begunov, G.A.; Titovskaya, V.N.; Galenko, A.V.

    1987-11-10

    Rapid growth of production of glycols and their derivatives, especially methyl and ethyl esters, and wide use of these substances in various branches of the national economy (1) inevitably necessitate analytical monitoring of their content in waste waters and various water bodies. The authors studied the scope of gas-chromatographic determination of microamounts of glycols and their esters in aqueous media at the sanitary standards level (10/sup -5/%) using activated charcoal for their adsorption concentration from aqueous solutions, desorption from the charcoal by ethanol, and evaporationconcentration of the alcoholic solutions. The quantitative concentration characteristics were studied with reference to ethylene glycol, propylene glycol, diethylene glycol, dipropylene glycol, triethyleneglycol, tripropylene glycol, tetraethylene glycol, ethylcellosolve, ethyl carbitol, and monoethyl ester of triethylene glycol.

  6. Lack of GLYCOLATE OXIDASE1, but Not GLYCOLATE OXIDASE2, Attenuates the Photorespiratory Phenotype of CATALASE2-Deficient Arabidopsis.

    PubMed

    Kerchev, Pavel; Waszczak, Cezary; Lewandowska, Aleksandra; Willems, Patrick; Shapiguzov, Alexey; Li, Zhen; Alseekh, Saleh; Mühlenbock, Per; Hoeberichts, Frank A; Huang, Jingjing; Van Der Kelen, Katrien; Kangasjärvi, Jaakko; Fernie, Alisdair R; De Smet, Riet; Van de Peer, Yves; Messens, Joris; Van Breusegem, Frank

    2016-07-01

    The genes coding for the core metabolic enzymes of the photorespiratory pathway that allows plants with C3-type photosynthesis to survive in an oxygen-rich atmosphere, have been largely discovered in genetic screens aimed to isolate mutants that are unviable under ambient air. As an exception, glycolate oxidase (GOX) mutants with a photorespiratory phenotype have not been described yet in C3 species. Using Arabidopsis (Arabidopsis thaliana) mutants lacking the peroxisomal CATALASE2 (cat2-2) that display stunted growth and cell death lesions under ambient air, we isolated a second-site loss-of-function mutation in GLYCOLATE OXIDASE1 (GOX1) that attenuated the photorespiratory phenotype of cat2-2 Interestingly, knocking out the nearly identical GOX2 in the cat2-2 background did not affect the photorespiratory phenotype, indicating that GOX1 and GOX2 play distinct metabolic roles. We further investigated their individual functions in single gox1-1 and gox2-1 mutants and revealed that their phenotypes can be modulated by environmental conditions that increase the metabolic flux through the photorespiratory pathway. High light negatively affected the photosynthetic performance and growth of both gox1-1 and gox2-1 mutants, but the negative consequences of severe photorespiration were more pronounced in the absence of GOX1, which was accompanied with lesser ability to process glycolate. Taken together, our results point toward divergent functions of the two photorespiratory GOX isoforms in Arabidopsis and contribute to a better understanding of the photorespiratory pathway. PMID:27225899

  7. Behavioral teratology of ethylene glycol monomethyl and monoethyl ethers

    SciTech Connect

    Nelson, B.K.; Brightwell, W.S.

    1984-08-01

    A recent addition to the field of teratology has been the inclusion of functional assessment techniques of offspring after prenatal exposure to exogenous agents. The present paper reviews the behavioral teratogenic effects of ethylene glycol monomethyl ether (EGME, 2-methoxyethanol) and ethylene glycol monoethyl ether (EGEE, 2-ethoxyethanol). Groups of 15 pregnant rats were exposed via inhalation to 25 ppm EGME or to 100 ppm EGEE on gestation days 7 to 13 or 14 to 20. An equal number of sham-exposed controls were included for both periods of gestation. The only effect noted in the maternal animals was a slightly prolonged gestation in the group exposed to 100 ppm EGEE on days 14 to 20. Litters were culled in four female and four male pups on the day of birth. Pups of each sex from all litters were tested on a variety of behavioral tasks (including tests of neuromuscular ability, activity, and learning ability) extending from postnatal days 10 to 90. In addition, brains from newborn and from 21-day-old offspring were removed and analyzed for concentrations of the neurotransmitters acetylcholine, dopamine, norepinephrine, and 5-hydroxytryptamine (serotonin). Both the behavioral testing and the neurochemical evaluations revealed functional alterations in the litter groups experiencing prenatal exposure to EGME and EGEE at concentrations which produced no observable effects in the maternal animals. 6 references, 3 tables.

  8. Fluorescence spectroscopy of individual semiconductor nanoparticles in different ethylene glycols.

    PubMed

    Flessau, Sandra; Wolter, Christopher; Pöselt, Elmar; Kröger, Elvira; Mews, Alf; Kipp, Tobias

    2014-06-14

    The optical properties of single colloidal semiconductor nanoparticles (NPs) are considerably influenced by the direct environment of the NPs. Here, the influence of different liquid and solid glycol matrices on CdSe-based NPs is investigated. Since the fluorescence of individual NPs varies from one NP to another, it is highly desirable to study the very same individual NPs in different matrices. This was accomplished by immobilizing NPs in a liquid cell sample holder or in microfluidic devices. The samples have been investigated by space-resolved wide-field fluorescence microscopy and energy- and time-resolved confocal scanning fluorescence microscopy with respect to fluorescence intensities, emission energies, blinking behavior, and fluorescence decay dynamics of individual NPs. During the measurements the NPs were exposed to air, to liquid ethylene glycols H(OCH2CH2)nOH (also called EGn) with different chain lengths (1 ≤ n ≤ 7), to liquid 2-methylpentane-2,3-diol, or to solid polyethylene oxide. It was found that EG6-7 (also known as PEG 300) is very well suited as a liquid matrix or solvent for experiments that correlate chemical and physical modifications of the surface and of the immediate environment of individual NPs to their fluorescence properties since it leads to intense and stable fluorescence emission of the NPs. PMID:24788878

  9. The Mm-Wave Rotational Spectrum of Glycolic Acid

    NASA Astrophysics Data System (ADS)

    Kisiel, Zbigniew; Pszczółkowski, Lech; Białkowska-Jaworska, Ewa; Charnley, Steven B.

    2014-06-01

    Glycolic acid, HOCH_2COOH is the simplest α-hydroxy acid. It is as yet undetected in the interstellar medium, but is known to be present in carbonaceous meteorites and in residues from UV-photolysed interstellar ice analogue mixtures. Prior rotational spectroscopy has been carried out up to 40 GHz for the main, SSC conformer, Presently we report the analysis of the rotational spectrum of glycolic acid on the basis of broadband measurements performed up to 318 GHz, and updated spectroscopic constants for the ground state and the first two excited states of the low-frequency ν21 torsional mode. We have used the AABS package to assign multiple further excited vibrational states of the SSC conformer. In particular, we have been able to assign the highly perturbed triad of ν14, ν20 and 3ν21 states. The triad has been fitted down to experimental accuracy with a coupled fit, which allowed us to pin down the hitherto elusive frequency of the ν21 mode. The experimental results make an interesting comparison with those of anharmonic force field calculations. We have also been able to extend the measurements for the AAT conformer. C.E.Blom, A.Bauder, Chem. Phys. Lett., 82, 492 (1981), J. Am. Chem. Soc., 104, 2993 (1982). H.Hasegawa, O.Ohashi, I.Yamaguchi, J. Mol. Spectrosc., 82, 205 (1982). P.D.Godfrey, F.M.Rodgers, R.D.Brown, J. Am. Chem. Soc., 119, 2232 (1997).

  10. Hydrogenolysis of ethylene glycol to methanol over modified RANEY® catalysts.

    PubMed

    Wu, Cheng-Tar; Qu, Jin; Elliott, Joseph; Yu, Kai Man Kerry; Tsang, Shik Chi Edman

    2013-06-21

    There is tremendous growing interest in utilizing biomass molecules for energy provision due to their carbon neutrality. Here, we employ ethylene glycol as a model compound for catalytic activation, which represents a basic unit for complex carbohydrate molecules (polyols). In this paper, hydrogenolysis of ethylene glycol to produce methanol in hydrogen over modified RANEY® Ni and Cu catalysts has been studied. This work provides essential information that may leads to the development of new catalysts for carbohydrate activation to methanol, a novel but important reaction concerning biomass conversion to transportable form of energy. Particularly, in this study, modification of electronic structure hence adsorption properties of RANEY® catalysts has mainly been achieved by blending with second metal(s). It is found that the activity and selectivity of this reaction can be significantly affected by this approach. In contrast, there is no subtle effect on methanol selectivity despite a great variation in the d-band centre position which shows a distinctive effect on other products. This result suggests that methanol is produced on specific surface sites independent from the other sites at an intrinsic rate and will not be converted to other products by the d-band alteration. PMID:23661262

  11. Ethylene glycol-assisted coating of titania on nanoparticles.

    PubMed

    Dahl, Michael; Castaneda, Fernando; Joo, Ji Bong; Reyes, Victor; Goebl, James; Yin, Yadong

    2016-06-14

    Coating titania shells onto sub-micron sized particles has been widely studied recently, with success mainly limited to objects with sizes above 50 nm. Direct coating on particles below this size has been difficult to attain especially with good control over properties such as thickness and crystallinity. Here we demonstrate that titanium-glycolate formed by reacting titanium alkoxide and ethylene glycol is an excellent precursor for coating titania on aqueous nanoparticles. The new coating method is particularly useful for its ability to coat materials lacking strong polymers or ligands which are frequently needed to facilitate typical titania coatings. We demonstrate the effectiveness of the process of coating titania on metal nanoparticles ranging from citrate-stabilized gold and silver spheres to gold nanorods and silver nanoplates, and larger particles such as SiO2 microspheres and polymer spheres. Further the thickness of these coatings can be tuned from a few nanometers to ∼40 nm through sequential coatings. These coatings can subsequently be crystallized into TiO2 through refluxing in water or by calcination to obtain crystalline shells. This procedure can be very useful for the production of TiO2 coatings with tunable thickness and crystallinity as well as for further study on the effect of TiO2 coatings on nanoparticles. PMID:26673403

  12. Particle Size Control of Polyethylene Glycol Coated Fe Nanoparticles

    NASA Astrophysics Data System (ADS)

    Srinivasan, B.; Bonder, M. J.; Zhang, Y.; Gallo, D.; Hadjipanayis, G. C.

    2006-03-01

    Recent interest in Fe nanoparticles with high magnetization is driven by their potential use in biomedical applications such as targeted drug delivery, MRI contrast enhancement and hyperthermia treatment of cancer. This study looks at the use of a polyethylene glycol (PEG) solution to mediate the particle size and therefore control the coercivity of the resulting nanoparticles. Iron nanoparticles were synthesized using an aqueous sodium borohydride reduction of ferrous chloride by a simultaneous introduction of reagents in a Y- junction. The resulting product was collected in a vessel containing a 15 mg/ml carboxyl terminated polyethylene glycol (cPEG) in ethyl alcohol solution located under the Y junction. By varying the length of tubing below the Y junction, the particle size was varied from 5-25 nm. X-ray diffraction data indicates the presence of either amorphous Fe-B or crystalline alpha Fe, depending on the molar ratio of reagents. Magnetic measurements indicate the particles are ferromagnetic with values of coercivity ranging from 200-500 Oe and a saturation magnetization in range of 70-110 emu/g. The XRD shows that the particles are not affected by the polymer coating.

  13. Thermophysical properties of ethylene glycol mixture based CNT nanofluids

    NASA Astrophysics Data System (ADS)

    Camarano, D. M.; Mansur, F. A.; Araújo, T. L. C. F.; Salles, G. C.; Santos, A. P.

    2016-07-01

    Nanofluids are produced by dispersing nanometer-scale solid particles into base liquids such as water, ethylene glycol, etc. The thermal quadrupole method is utilized to determine the thermophysical properties of materials. By this technique, the thermal diffusivity and conductivity of different nanofluids containing the surfactants humic acid, sodium salt of humic acid and sodium carboxymethyl cellulose and multi-wall carbon nanotubes were evaluated at room temperature and at 75 oC. Values of thermal diffusivity varying in the range from 9.60x10-8 m2s-1 to 1.46x10-7 m2s-1 and thermal conductivity from 0.26 Wm-1K-1 to 41 Wm-1K-1 were obtained. As main conclusions, it was noted that nanofluids exhibit superior heat transfer characteristics than the conventional heat transfer fluid and the thermal conductivity is enhanced by 50% for the nanofluid containing 0.0275 mg/mL of sodium salt of humic acid + ethylene glycol, at the temperature of 25 oC.

  14. Poly(ethylene glycol)-poly(lactic-co-glycolic acid) based thermosensitive injectable hydrogels for biomedical applications.

    PubMed

    Alexander, Amit; Ajazuddin; Khan, Junaid; Saraf, Swarnlata; Saraf, Shailendra

    2013-12-28

    Stimuli triggered polymers provide a variety of applications related with the biomedical fields. Among various stimuli triggered mechanisms, thermoresponsive mechanisms have been extensively investigated, as they are relatively more convenient and effective stimuli for biomedical applications. In a contemporary approach for achieving the sustained action of proteins, peptides and bioactives, injectable depots and implants have always remained the thrust areas of research. In the same series, Poloxamer based thermogelling copolymers have their own limitations regarding biodegradability. Thus, there is a need to have an alternative biomaterial for the formulation of injectable hydrogel, which must remain biocompatible along with safety and efficacy. In the same context, poly(ethylene glycol) (PEG) based copolymers play a crucial role as a biomedical material for biomedical applications, because of their biocompatibility, biodegradability, thermosensitivity and easy controlled characters. This review stresses on the physicochemical property, stability and composition prospects of smart PEG/poly(lactic-co-glycolic acid) (PLGA) based thermoresponsive injectable hydrogels, recently utilized for biomedical applications. The manuscript also highlights the synthesis scheme and stability characteristics of these copolymers, which will surely help the researchers working in the same area. We have also emphasized the applied use of these smart copolymers along with their formulation problems, which could help in understanding the possible modifications related with these, to overcome their inherent associated limitations. PMID:24144918

  15. A thermosensitive hydrogel based on biodegradable amphiphilic poly(ethylene glycol) polycaprolactone poly(ethylene glycol) block copolymers

    NASA Astrophysics Data System (ADS)

    Gong, Chang Yang; Qian, Zhi Yong; Liu, Cai Bing; Juan Huang, Mei; Gu, Ying Chun; Wen, Yan Jun; Kan, Bing; Wang, Ke; Dai, Mei; Li, Xing Yi; Gou, Ma Ling; Tu, Ming Jing; Wei, Yu Quan

    2007-06-01

    A series of low molecular weight poly(ethylene glycol)-polycaprolactone-poly(ethylene glycol) (PEG-PCL-PEG) biodegradable block copolymers were successfully synthesized using isophorone diisocyanate (IPDI) as the coupling agent, and were characterized using 1H NMR and Fourier transform infrared spectroscopy. The aqueous solutions of the PEG-PCL-PEG copolymers displayed a special thermosensitive gel-sol transition when the concentration was above the corresponding critical gel concentration. Gel-sol phase diagrams were recorded using the test-tube-inversion method; they depended on the hydrophilic/hydrophobic balance in the macromolecular structure, as well as some other factors, including the heating history, volume, and the ageing time of the copolymer aqueous solutions and dissolution temperature of the copolymers. As a result, the gel-sol transition temperature range could be altered, which might be very useful for application in injectable drug delivery systems. This work was financially supported by the Chinese Key Basic Research Program (2004CB518800 and 2004CB518807), and the Sichuan Key Project of Science and Technology (06(05SG022-021-02)).

  16. 21 CFR 172.856 - Propylene glycol mono- and diesters of fats and fatty acids.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Propylene glycol mono- and diesters of fats and... diesters of fats and fatty acids. Propylene glycol mono- and diesters of fats and fatty acids may be safely used in food, subject to the following prescribed conditions: (a) They are produced from edible...

  17. 21 CFR 172.856 - Propylene glycol mono- and diesters of fats and fatty acids.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Propylene glycol mono- and diesters of fats and... diesters of fats and fatty acids. Propylene glycol mono- and diesters of fats and fatty acids may be safely used in food, subject to the following prescribed conditions: (a) They are produced from edible...

  18. 21 CFR 172.856 - Propylene glycol mono- and diesters of fats and fatty acids.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Propylene glycol mono- and diesters of fats and... diesters of fats and fatty acids. Propylene glycol mono- and diesters of fats and fatty acids may be safely used in food, subject to the following prescribed conditions: (a) They are produced from edible...

  19. 21 CFR 172.856 - Propylene glycol mono- and diesters of fats and fatty acids.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Propylene glycol mono- and diesters of fats and... diesters of fats and fatty acids. Propylene glycol mono- and diesters of fats and fatty acids may be safely used in food, subject to the following prescribed conditions: (a) They are produced from edible...

  20. Synthesis of Monodispersed Tantalum(V) oxide Nanospheres by an Ethylene Glycol Mediated Route

    EPA Science Inventory

    Tantalum(V) oxide (Ta2O5) nanospheres have been synthesized by a very simple ethylene glycol mediated route. The two-step process involves the formation of glycolate nanoparticles and their subsequent hydrolysis and calcination to generate the final Ta2O5 nanospheres. The synthes...

  1. AN EVALUATION OF THE HUMAN CARCINOGENIC POTENTIAL OF ETHYLENE GLYCOL BUTYL ETHER: INTERIM FINAL POSITION PAPER

    EPA Science Inventory

    In order to determine the merit of a petition to remove ethylene glycol ether (EGBE) from the Agency's Hazardous Air Pollutant (HAP) list, EPA has developed an interim final position paper, An Evaluation of the Human Carcinogenic Potential of Ethylene Glycol Butyl Ether, t...

  2. 21 CFR 573.800 - Polyethylene glycol (400) mono- and dioleate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.800 Polyethylene glycol (400) mono- and dioleate. (a) The food additive polyethylene glycol (400) mono- and dioleate meets the following...

  3. 21 CFR 573.800 - Polyethylene glycol (400) mono- and dioleate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.800 Polyethylene glycol (400) mono- and dioleate. (a) The food additive polyethylene glycol (400) mono- and dioleate meets the following...

  4. 40 CFR 721.6180 - Polyalkylene glycol polyamide ester phosphate (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... phosphate (generic). 721.6180 Section 721.6180 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.6180 Polyalkylene glycol polyamide ester phosphate (generic). (a... generically as polyalkylene glycol polyamide ester phosphate (PMN P-98-0903) is subject to reporting...

  5. 40 CFR 721.6180 - Polyalkylene glycol polyamide ester phosphate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... phosphate (generic). 721.6180 Section 721.6180 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.6180 Polyalkylene glycol polyamide ester phosphate (generic). (a... generically as polyalkylene glycol polyamide ester phosphate (PMN P-98-0903) is subject to reporting...

  6. 21 CFR 178.3750 - Polyethylene glycol (mean molecular weight 200-9,500).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Polyethylene glycol (mean molecular weight 200-9... molecular weight 200-9,500). Polyethylene glycol identified in this section may be safely used as a... conditions: (a) The additive is an addition polymer of ethylene oxide and water with a mean molecular...

  7. 21 CFR 178.3750 - Polyethylene glycol (mean molecular weight 200-9,500).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Polyethylene glycol (mean molecular weight 200-9... molecular weight 200-9,500). Polyethylene glycol identified in this section may be safely used as a... conditions: (a) The additive is an addition polymer of ethylene oxide and water with a mean molecular...

  8. Solvation agent for disulfide precipitates from inhibited glycol-water solutions

    NASA Technical Reports Server (NTRS)

    Taylor, M. F.

    1971-01-01

    Small additions /0.01 percent or less/ of triethanoloamine sodium sulfite adduct to mercapto benzothiazole inhibited glycol water heat transfer solutions containing disulfide precipitate produce marked reduction in amount of precipitate. Adduct is useful as additive in glycol base antifreezes and coolants.

  9. 21 CFR 178.3750 - Polyethylene glycol (mean molecular weight 200-9,500).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Polyethylene glycol (mean molecular weight 200-9... Adjuvants and Production Aids § 178.3750 Polyethylene glycol (mean molecular weight 200-9,500). Polyethylene... chapter. (c) The provisions of paragraph (b) of this section are not applicable to polyethylene...

  10. 40 CFR 721.3900 - Alkyl polyethylene glycol phosphate, potassium salt.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., potassium salt. 721.3900 Section 721.3900 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.3900 Alkyl polyethylene glycol phosphate, potassium salt. (a) Chemical... as alkyl polyethylene glycol phosphate, potassium salt (P-90-481), is subject to reporting under...

  11. 40 CFR 721.3900 - Alkyl polyethylene glycol phosphate, potassium salt.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., potassium salt. 721.3900 Section 721.3900 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.3900 Alkyl polyethylene glycol phosphate, potassium salt. (a) Chemical... as alkyl polyethylene glycol phosphate, potassium salt (P-90-481), is subject to reporting under...

  12. 40 CFR 721.3900 - Alkyl polyethylene glycol phosphate, potassium salt.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., potassium salt. 721.3900 Section 721.3900 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.3900 Alkyl polyethylene glycol phosphate, potassium salt. (a) Chemical... as alkyl polyethylene glycol phosphate, potassium salt (P-90-481), is subject to reporting under...

  13. 40 CFR 721.3900 - Alkyl polyethylene glycol phosphate, potassium salt.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., potassium salt. 721.3900 Section 721.3900 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.3900 Alkyl polyethylene glycol phosphate, potassium salt. (a) Chemical... as alkyl polyethylene glycol phosphate, potassium salt (P-90-481), is subject to reporting under...

  14. 40 CFR 721.3900 - Alkyl polyethylene glycol phosphate, potassium salt.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., potassium salt. 721.3900 Section 721.3900 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.3900 Alkyl polyethylene glycol phosphate, potassium salt. (a) Chemical... as alkyl polyethylene glycol phosphate, potassium salt (P-90-481), is subject to reporting under...

  15. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Trimellitic anhydride, polymer with... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  16. 40 CFR 721.10546 - Pentenylated polyethylene glycol sulfate salt (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... sulfate salt (generic). 721.10546 Section 721.10546 Protection of Environment ENVIRONMENTAL PROTECTION... New Uses for Specific Chemical Substances § 721.10546 Pentenylated polyethylene glycol sulfate salt... identified generically as pentenylated polyethylene glycol sulfate salt (PMN P-04-340) is subject...

  17. 40 CFR 721.10546 - Pentenylated polyethylene glycol sulfate salt (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... sulfate salt (generic). 721.10546 Section 721.10546 Protection of Environment ENVIRONMENTAL PROTECTION... New Uses for Specific Chemical Substances § 721.10546 Pentenylated polyethylene glycol sulfate salt... identified generically as pentenylated polyethylene glycol sulfate salt (PMN P-04-340) is subject...

  18. On the origin of reactivity of steam reforming of ethylene glycol on supported Ni catalysts.

    PubMed

    Li, Shuirong; Zhang, Chengxi; Zhang, Peng; Wu, Gaowei; Ma, Xinbin; Gong, Jinlong

    2012-03-28

    This paper describes a strategy for producing hydrogen via steam reforming of ethylene glycol over supported nickel catalysts. Nickel plays a crucial role in conversion of ethylene glycol and production of hydrogen, while oxide supports affect product distribution of carbonaceous species. A plausible reaction pathway is proposed based on our results and the literature. PMID:22246195

  19. 40 CFR 721.6180 - Polyalkylene glycol polyamide ester phosphate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... phosphate (generic). 721.6180 Section 721.6180 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.6180 Polyalkylene glycol polyamide ester phosphate (generic). (a... generically as polyalkylene glycol polyamide ester phosphate (PMN P-98-0903) is subject to reporting...

  20. 40 CFR 721.6180 - Polyalkylene glycol polyamide ester phosphate (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... phosphate (generic). 721.6180 Section 721.6180 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.6180 Polyalkylene glycol polyamide ester phosphate (generic). (a... generically as polyalkylene glycol polyamide ester phosphate (PMN P-98-0903) is subject to reporting...

  1. 40 CFR 721.6180 - Polyalkylene glycol polyamide ester phosphate (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... phosphate (generic). 721.6180 Section 721.6180 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.6180 Polyalkylene glycol polyamide ester phosphate (generic). (a... generically as polyalkylene glycol polyamide ester phosphate (PMN P-98-0903) is subject to reporting...

  2. Prehospital diagnosis of massive ethylene glycol poisoning and use of an early antidote.

    PubMed

    Amathieu, Roland; Merouani, Medhi; Borron, Stephen W; Lapostolle, Frédéric; Smail, Nadia; Adnet, Frédéric

    2006-08-01

    We report the case of a patient suspected of voluntary massive poisoning by ethylene glycol. Prehospital diagnosis was established by portable blood analyser and an early antidote with 4 MP treatment initiated in out-of-hospital setting. Use of portable blood analyser in prehospital care should be considered in case of suspected massive poisoning by ethylene glycol. PMID:16808995

  3. 21 CFR 589.1001 - Propylene glycol in or on cat food.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Propylene glycol in or on cat food. 589.1001... or on cat food. The Food and Drug Administration has determined that propylene glycol in or on cat... on cat food causes the feed to be adulterated and in violation of the Federal Food, Drug,...

  4. 21 CFR 589.1001 - Propylene glycol in or on cat food.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Propylene glycol in or on cat food. 589.1001... or on cat food. The Food and Drug Administration has determined that propylene glycol in or on cat... on cat food causes the feed to be adulterated and in violation of the Federal Food, Drug,...

  5. 21 CFR 589.1001 - Propylene glycol in or on cat food.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Propylene glycol in or on cat food. 589.1001... or on cat food. The Food and Drug Administration has determined that propylene glycol in or on cat... on cat food causes the feed to be adulterated and in violation of the Federal Food, Drug,...

  6. 21 CFR 589.1001 - Propylene glycol in or on cat food.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Propylene glycol in or on cat food. 589.1001... or on cat food. The Food and Drug Administration has determined that propylene glycol in or on cat... on cat food causes the feed to be adulterated and in violation of the Federal Food, Drug,...

  7. 21 CFR 589.1001 - Propylene glycol in or on cat food.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Propylene glycol in or on cat food. 589.1001... or on cat food. The Food and Drug Administration has determined that propylene glycol in or on cat... on cat food causes the feed to be adulterated and in violation of the Federal Food, Drug,...

  8. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Trimellitic anhydride, polymer with... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  9. Perfluorotriethylene glycol dimethacrylate modified composite resins for improved dental restoratives

    NASA Astrophysics Data System (ADS)

    Wang, Guigui

    The studies described in this dissertation focus on improvement of water resistance and durability of current dental composite resins. The physical, thermal and mechanical properties of the diluent fluorinated monomer, perfluorotriethylene glycol methacrylate (FTEGDMA), FTEGDMA-containing neat resin and its formulated composite resins were evaluated and compared with the conventional visible light-cured (VLC) dental composite resins. Further, the biocompatibility of this monomer and its cured resins were investigated and compared with their conventional counterparts. The results showed that the FTEGDMA-containing neat resin and its composite systems showed more water resistance and longer durability, compared to the conventional Bisphenol A glycol dimethacrylate/triethylene glycol dimethacrylate (BisGMA/TEGDMA) system. The preliminary in vitro biocompatibility test showed that FTEGDMA favored cell growth, compared to the conventional dental resins. The first study investigated basic physical properties of the diluent FTEGDMA monomer. The results showed that the FTEGDMA exhibited lower viscosity, lower refractive index, and a smaller contact angle, which were all beneficial to lowering the water sorption and increasing hydrophobicity. The second study evaluated some physical, thermal, and mechanical properties of the FTEGDMA based neat resins, including polymerization shrinkage, contact angle, water sorption, glass-transitions, dynamic modulus, thermal expansion, compressive strength, and diametral tensile strength. The results showed that the FTEGDMA diluent exhibited significant less water sorption and lower polymerization shrinkage and the BisEMA also contributed towards reducing water sorption. The third study investigated the effects of the FTEGDMA on the mechanical properties of the composite resins including flexural strength (FS), diametral tensile strength (DTS) and wear resistance (WR). In addition, the fracture surface topography of the tested materials

  10. Detection and quantitative determination of diethylene glycol in ethyl alcohol using gamma- ray spectroscopy.

    PubMed

    Udagani, Chikkappa; Ramesh, Thimmasandra Narayan

    2015-08-01

    Determination of the toxic diethylene glycol contamination in ethyl alcohol demands a rapid, accurate and reliable method. Diethylene glycol (DEG) ingestion, accidental or intentional, can lead to death. Clinical and analytical methods used to detect diethylene glycol in alcohol require several hours to days due to tedious instrument handling and measurements. Enzymatic assays face difficulty due to analytic problems. As an alternative method of data analysis, we have used γ-ray spectroscopic method to estimate the diethylene glycol contamination in alcohol by monitoring the variation in the linear and mass attenuation coefficients. This method is simple, robust, portable and can provide reliable and quantitative information about the ethyl alcohol adulterated with diethylene glycol which is of broader interest to society. PMID:26243958

  11. Oxidative phosphorylation during glycollate metabolism in mitochondria from phototrophic Euglena gracilis.

    PubMed

    Collins, N; Brown, R H; Merrett, M J

    1975-09-01

    Mitochondria were isolated by gradient centrifugation on linear sucrose gradients from broken cell suspensions of phototrophically grown Euglena gracilis. An antimycin A-sensitive but rotenone-insensitive glycollate-dependent oxygen uptake was demonstrated in isolated mitochondria. The partial reactions of glycollate-cytochrome c oxidoreductase and cytochrome c oxidase were demonstrated by using Euglena cytochrome c as exogenous electron acceptor/donor. Isolated mitochondria contain glycollate dehydrogenase and glyoxylate-glutamate aminotransferase and oxidize exogenous glycine. A P:O ratio of 1.7 was obtained for glycollate oxidation, consistent with glycollate electrons entering the Euglena respiratory chain at the flavoprotein level. The significance of these results is discussed in relation to photorespiration in algae. PMID:813630

  12. Molecular Hydrogen Formation from Proximal Glycol Pairs on TiO2(110)

    SciTech Connect

    Chen, Long; Li, Zhenjun; Smith, R. Scott; Kay, Bruce D.; Dohnalek, Zdenek

    2014-04-16

    Understanding hydrogen formation on TiO2 surfaces is of great importance as it could provide fundamental insight into water splitting for hydrogen production using solar energy. In this work, hydrogen formation from glycols having different numbers of methyl end-groups have been studied using temperature pro-grammed desorption on reduced, hydroxylated, and oxidized TiO2(110) surfaces. The results from OD-labeled glycols demon-strate that gas-phase molecular hydrogen originates exclusively from glycol hydroxyl groups. The yield is controlled by a combi-nation of glycol coverage, steric hindrance, TiO2(110) order and the amount of subsurface charge. Combined, these results show that proximal pairs of hydroxyl aligned glycol molecules and subsurface charge are required to maximize the yield of this redox reaction. These findings highlight the importance of geometric and electronic effects in hydrogen formation from adsorbates on TiO2(110).

  13. Horseradish Peroxidase Inactivation: Heme Destruction and Influence of Polyethylene Glycol

    PubMed Central

    Mao, Liang; Luo, Siqiang; Huang, Qingguo; Lu, Junhe

    2013-01-01

    Horseradish peroxidase (HRP) mediates efficient conversion of many phenolic contaminants and thus has potential applications for pollution control. Such potentially important applications suffer however from the fact that the enzyme becomes quickly inactivated during phenol oxidation and polymerization. The work here provides the first experimental data of heme consumption and iron releases to support the hypothesis that HRP is inactivated by heme destruction. Product of heme destruction is identified using liquid chromatography with mass spectrometry. The heme macrocycle destruction involving deprivation of the heme iron and oxidation of the 4-vinyl group in heme occurs as a result of the reaction. We also demonstrated that heme consumption and iron releases resulting from HRP destruction are largely reduced in the presence of polyethylene glycol (PEG), providing the first evidence to indicate that heme destruction is effectively suppressed by co-dissolved PEG. These findings advance a better understanding of the mechanisms of HRP inactivation. PMID:24185130

  14. Ecotoxicity of diethylene glycol and risk assessment for marine environment.

    PubMed

    Manfra, L; Tornambè, A; Savorelli, F; Rotini, A; Canepa, S; Mannozzi, M; Cicero, A M

    2015-03-01

    Diethylene glycol (DEG) is a chemical compound used during offshore oil activities to prevent hydrate formation, and it may be released into the sea. A full ecotoxicological characterization is required according to European and Italian regulations for chemical substances. We have evaluated long-term toxic effects of DEG on indicator species of the marine environment as algae (Phaeodactylum tricornutum), crustaceans (Artemia franciscana), molluscs (Tapes philippinarum) and fish (Dicentrarchus labrax). A range of no observed effect concentrations (365-25,000 mg/L) has been identified. Based on the toxicity results and the ratio between predicted environmental concentration and predicted no-effect concentration, we have estimated the maximum allowable value of DEG in the marine environment. PMID:25463226

  15. The effect of polyethylene glycol on shellac stability

    NASA Astrophysics Data System (ADS)

    Khairuddin; Pramono, Edi; Budi Utomo, Suryadi; Wulandari, Viki; A'an Zahrotul, W.; Clegg, Francis

    2016-02-01

    The effect of polyethylene glycol (PEG) having amolecular weight of 1000 and 2000 on shellac stability has been investigated in this research. The shellac was shellac wax free, and the solvent was ethanol 96%. Shellac films were prepared by solventevaporationmethod. The stability of shellac was investigated using insoluble solid test, Fourier Transform Infra Red (FTIR), Thermogravimetry Analyzer (TGA), and Water Vapour Transmission Rate (WVTR). The results showed that stability of shellac decreased after heating at 125oC for 10,30,90,and 180 minutes, and storing for 1 month at 27 oC and 85 relative humidity (RH). PEG improved the stability, and the most stable effect was achieved through PEG1000.

  16. Rheological profile of boron nitride–ethylene glycol nanofluids

    SciTech Connect

    Żyła, Gaweł; Witek, Adam; Gizowska, Magdalena

    2015-01-07

    The paper presents the complete rheological profile of boron nitride (BN)–ethylene glycol (EG) nanofluids. Nanofluids have been produced by two-step method on the basis of commercially available powder of plate-like grains of nanometrical thickness. Viscoelastic structure has been determined in oscillatory measurements at a constant frequency and temperature. Viscosity and flow curves for these materials have been measured. Studies have shown that the Carreau model can be used for the modeling of dynamic viscosity curves of the material. The samples were tested for the presence of thixotropy. The dependence of viscosity on temperature was also examined. The effect of temperature on the dynamic viscosity of BN-EG nanofluids can be modelled with the use of Vogel-Fulcher-Tammann expression.

  17. Simulation of polyethylene glycol and calcium-mediated membrane fusion

    SciTech Connect

    Pannuzzo, Martina; De Jong, Djurre H.; Marrink, Siewert J.; Raudino, Antonio

    2014-03-28

    We report on the mechanism of membrane fusion mediated by polyethylene glycol (PEG) and Ca{sup 2+} by means of a coarse-grained molecular dynamics simulation approach. Our data provide a detailed view on the role of cations and polymer in modulating the interaction between negatively charged apposed membranes. The PEG chains cause a reduction of the inter-lamellar distance and cause an increase in concentration of divalent cations. When thermally driven fluctuations bring the membranes at close contact, a switch from cis to trans Ca{sup 2+}-lipid complexes stabilizes a focal contact acting as a nucleation site for further expansion of the adhesion region. Flipping of lipid tails induces subsequent stalk formation. Together, our results provide a molecular explanation for the synergistic effect of Ca{sup 2+} and PEG on membrane fusion.

  18. Temperature effects on propylene glycol-contaminated soil cores

    SciTech Connect

    Davis-Hoover, W.J.; Vesper, S.J.

    1995-12-31

    The authors are examining the effect of temperature on the biodegradation of propylene glycol (PPG) in subsurface soil cores. Subsurface soils were contaminated in situ with PPG and allowed to diffuse into the soil for 30 days. The treated soil was reexposed, and intact were incubated for 30 days at temperatures ranging from 9 to 39 C in a temperature gradient incubator. At 30 days, soil moisture, soil pH, microbial activity [fluorescein diacetate (FDA) test], R2A plate counts, and plate counts of PPG degraders were studied. Although the soil moisture and pH remained relatively unchanged, the parameters of microbial activity varied rather consistently with temperature. Multiple populations or subpopulations of bacteria appear to exist between temperatures of 9 and 39 C in these soils.

  19. A compact 100 kV high voltage glycol capacitor

    NASA Astrophysics Data System (ADS)

    Wang, Langning; Liu, Jinliang; Feng, Jiahuai

    2015-01-01

    A high voltage capacitor is described in this paper. The capacitor uses glycerol as energy storage medium, has a large capacitance close to 1 nF, can hold off voltages of up to 100 kV for μs charging time. Allowing for low inductance, the capacitor electrode is designed as coaxial structure, which is different from the common structure of the ceramic capacitor. With a steady capacitance at different frequencies and a high hold-off voltage of up to 100 kV, the glycol capacitor design provides a potential substitute for the ceramic capacitors in pulse-forming network modulator to generate high voltage pulses with a width longer than 100 ns.

  20. GLYCOLIC-FORMIC ACID FLOWSHEET SLUDGE MATRIX STUDY

    SciTech Connect

    Lambert, D.; Koopman, D.

    2011-06-30

    Testing was completed to demonstrate the viability of the newly developed glycolic acid/formic acid flowsheet on processing in the Defense Waste Processing Facility's (DWPF) Chemical Process Cell (CPC). The Savannah River National Laboratory (SRNL) initiated a sludge matrix study to evaluate the impact of changing insoluble solid composition on the processing characteristics of slurries in DWPF. Four sludge simulants were prepared to cover two compositional ranges in the waste. The first was high iron/low aluminum versus low iron/high aluminum (referred to as HiFe or LoFe in this report). The second was high calcium-manganese/low nickel, chromium, and magnesium versus low calcium-manganese/high nickel, chromium, and magnesium (referred to as HiMn or LoMn in this report). These two options can be combined to form four distinct sludge compositions. The sludge matrix study called for testing each of these four simulants near the minimum acid required for nitrite destruction (100% acid stoichiometry) and at a second acid level that produced significant hydrogen by noble metal catalyzed decomposition of formic acid (150% acid stoichiometry). Four simulants were prepared based on the four possible combinations of the Al/Fe and Mn-Ca/Mg-Ni-Cr options. Preliminary simulant preparation work has already been documented. The four simulants were used for high and low acid testing. Eight planned experiments (GF26 to GF33) were completed to demonstrate the viability of the glycolic-formic flowsheet. Composition and physical property measurements were made on the SRAT product. Composition measurements were made on the condensate from the Mercury Water Wash Tank (MWWT), Formic Acid Vent Condenser (FAVC), ammonia scrubber and on SRAT samples pulled throughout the SRAT cycle. Updated values for formate loss and nitrite-tonitrate conversion were found that can be used in the acid calculations for future sludge matrix process simulations with the glycolic acid/formic acid flowsheet

  1. Polyethylene glycol diffusion in ex vivo skin tissue

    NASA Astrophysics Data System (ADS)

    Genin, V. D.; Tuchina, D. K.; Bashkatov, A. N.; Genina, E. A.; Tuchin, V. V.

    2015-11-01

    Optical clearing of the rat skin under the action of polyethylene glycol (PEG) with molecular weight 300 and 400 Dalton was studied ex vivo. The collimated transmittance was measured at the wavelength range 500-900 nm. It was found that collimated transmittance of skin samples increased, whereas weight, thickness and area of the samples decreased during PEG penetration in skin tissue. A mechanism of the optical clearing under the action of PEG is discussed. Taking into account the kinetics of volume and thickness of the skin samples, diffusion coefficient of PEGs in skin tissue has been estimated as (1.83±2.22)×10-6 cm2/s and (1.70±1.47)×10-6 cm2/s for PEG-300 and PEG-400, respectively. The presented results can be useful for enhancement of many methods of laser therapy and optical diagnostics of skin diseases and localization of subcutaneous neoplasms.

  2. Effects of sterilization on poly(ethylene glycol) hydrogels.

    PubMed

    Kanjickal, Deenu; Lopina, Stephanie; Evancho-Chapman, M Michelle; Schmidt, Steven; Donovan, Duane

    2008-12-01

    The past few decades have witnessed a dramatic increase in the development of polymeric biomaterials. These biomaterials have to undergo a sterilization procedure before implantation. However, many sterilization procedures have been shown to profoundly affect polymer properties. Poly(ethylene glycol) hydrogels have gained increasing importance in the controlled delivery of therapeutics and in tissue engineering. We evaluated the effect of ethylene oxide (EtO), hydrogen peroxide (H(2)O(2)), and gamma sterilization of poly(ethylene glycol) hydrogels on properties relevant to controlled drug delivery and tissue engineering. We observed that the release of cyclosporine (CyA) (an immunosuppressive drug that is effective in combating tissue rejection following organ transplantation) was significantly affected by the type of sterilization. However, that was not the case with rhodamine B, a dye. Hence, the drug release characteristics were observed to be dependent not only on the sterilization procedure but also on the type of agent that needs to be delivered. In addition, differences in the swelling ratios for the sterilized and unsterilized hydrogels were statistically significant for 1:1 crosslinked hydrogels derived from the 8000 MW polymer. Significant differences were also observed for gamma sterilization for 1:1 crosslinked hydrogels derived from the 3350 MW polymer and also the 2:1 crosslinked hydrogels derived from the 8000 MW polymer. Atomic force microscopy (AFM) studies revealed that the roughness parameter for the unsterilized and EtO-sterilized PEG hydrogels remained similar. However, a statistically significant reduction of the roughness parameter was observed for the H(2)O(2) and gamma-sterilized samples. Electron spin resonance (ESR) studies on the unsterilized and the sterilized samples revealed the presence of the peroxy and the triphenyl methyl carbon radical in the samples. The gamma and the H(2)O(2)-sterilized samples were observed to have a much

  3. Developmental pharmacokinetics of propylene glycol in preterm and term neonates

    PubMed Central

    De Cock, Roosmarijn F W; Knibbe, Catherijne A J; Kulo, Aida; de Hoon, Jan; Verbesselt, Rene; Danhof, Meindert; Allegaert, Karel

    2013-01-01

    AIM Propylene glycol (PG) is often applied as an excipient in drug formulations. As these formulations may also be used in neonates, the aim of this study was to characterize the pharmacokinetics of propylene glycol, co-administered intravenously with paracetamol (800 mg PG/1000 mg paracetamol) or phenobarbital (700 mg PG/200 mg phenobarbital) in preterm and term neonates. METHODS A population pharmacokinetic analysis was performed based on 372 PG plasma concentrations from 62 (pre)term neonates (birth weight (bBW) 630–3980 g, postnatal age (PNA) 1–30 days) using NONMEM 6.2. The model was subsequently used to simulate PG exposure upon administration of paracetamol or phenobarbital in neonates (gestational age 24–40 weeks). RESULTS In a one compartment model, birth weight and PNA were both identified as covariates for PG clearance using an allometric function (CLi= 0.0849 × {(bBW/2720)1.69× (PNA/3)0.201}). Volume of distribution scaled allometrically with current bodyweight (Vi= 0.967 × {(BW/2720)1.45}) and was estimated 1.77 times higher when co-administered with phenobarbital compared with paracetamol. By introducing these covariates a large part of the interindividual variability on clearance (65%) as well as on volume of distribution (53%) was explained. The final model shows that for commonly used dosing regimens, the population mean PG peak and trough concentrations range between 33–144 and 28–218 mg l−1 (peak) and 19–109 and 6–112 mg l−1 (trough) for paracetamol and phenobarbital formulations, respectively, depending on birth weight and age of the neonates. CONCLUSION A pharmacokinetic model was developed for PG co-administered with paracetamol or phenobarbital in neonates. As such, large variability in PG exposure may be expected in neonates which is dependent on birth weight and PNA. PMID:22536830

  4. Fabrication of poly(ethylene glycol) hydrogel microstructures using photolithography.

    PubMed

    Revzin, A; Russell, R J; Yadavalli, V K; Koh, W G; Deister, C; Hile, D D; Mellott, M B; Pishko, M V

    2001-09-01

    The fabrication of hydrogel microstructures based upon poly(ethylene glycol) diacrylates, dimethacrylates, and tetraacrylates patterned photolithographically on silicon or glass substrates is described. A silicon/silicon dioxide surface was treated with 3-(trichlorosilyl)propyl methacrylate to form a self-assembled monolayer (SAM) with pendant acrylate groups. The SAM presence on the surface was verified using ellipsometry and time-of-flight secondary ion mass spectrometry. A solution containing an acrylated or methacrylated poly(ethylene glycol) derivative and a photoinitiator (2,2-dimethoxy-2-phenylacetophenone) was spin-coated onto the treated substrate, exposed to 365 nm ultraviolet light through a photomask, and developed with either toluene, water, or supercritical CO2. As a result of this process, three-dimensional, cross-linked PEG hydrogel microstructures were immobilized on the surface. Diameters of cylindrical array members were varied from 600 to 7 micrometers by the use of different photomasks, while height varied from 3 to 12 micrometers, depending on the molecular weight of the PEG macromer. In the case of 7 micrometers diameter elements, as many as 400 elements were reproducibly generated in a 1 mm2 square pattern. The resultant hydrogel patterns were hydrated for as long as 3 weeks without delamination from the substrate. In addition, micropatterning of different molecular weights of PEG was demonstrated. Arrays of hydrogel disks containing an immobilized protein conjugated to a pH sensitive fluorophore were also prepared. The pH sensitivity of the gel-immobilized dye was similar to that in an aqueous buffer, and no leaching of the dye-labeled protein from the hydrogel microstructure was observed over a 1 week period. Changes in fluorescence were also observed for immobilized fluorophore labeled acetylcholine esterase upon the addition of acetyl acholine. PMID:12448421

  5. Fabrication of poly(ethylene glycol) hydrogel microstructures using photolithography

    NASA Technical Reports Server (NTRS)

    Revzin, A.; Russell, R. J.; Yadavalli, V. K.; Koh, W. G.; Deister, C.; Hile, D. D.; Mellott, M. B.; Pishko, M. V.

    2001-01-01

    The fabrication of hydrogel microstructures based upon poly(ethylene glycol) diacrylates, dimethacrylates, and tetraacrylates patterned photolithographically on silicon or glass substrates is described. A silicon/silicon dioxide surface was treated with 3-(trichlorosilyl)propyl methacrylate to form a self-assembled monolayer (SAM) with pendant acrylate groups. The SAM presence on the surface was verified using ellipsometry and time-of-flight secondary ion mass spectrometry. A solution containing an acrylated or methacrylated poly(ethylene glycol) derivative and a photoinitiator (2,2-dimethoxy-2-phenylacetophenone) was spin-coated onto the treated substrate, exposed to 365 nm ultraviolet light through a photomask, and developed with either toluene, water, or supercritical CO2. As a result of this process, three-dimensional, cross-linked PEG hydrogel microstructures were immobilized on the surface. Diameters of cylindrical array members were varied from 600 to 7 micrometers by the use of different photomasks, while height varied from 3 to 12 micrometers, depending on the molecular weight of the PEG macromer. In the case of 7 micrometers diameter elements, as many as 400 elements were reproducibly generated in a 1 mm2 square pattern. The resultant hydrogel patterns were hydrated for as long as 3 weeks without delamination from the substrate. In addition, micropatterning of different molecular weights of PEG was demonstrated. Arrays of hydrogel disks containing an immobilized protein conjugated to a pH sensitive fluorophore were also prepared. The pH sensitivity of the gel-immobilized dye was similar to that in an aqueous buffer, and no leaching of the dye-labeled protein from the hydrogel microstructure was observed over a 1 week period. Changes in fluorescence were also observed for immobilized fluorophore labeled acetylcholine esterase upon the addition of acetyl acholine.

  6. DEVELOPMENT OF A PHYSIOLOGICALLY BASED PHARMACOKINETIC MODEL FOR ETHYLENE GLYCOL AND ITS MAJOR METABOLITE, GLYCOLIC ACID, IN RATS AND HUMANS

    SciTech Connect

    Corley, Rick A.; Bartels, M J.; Carney, E W.; Weitz, Karl K.; Soelberg, Jolen J.; Gies, Richard A.; Thrall, Karla D.

    2005-05-19

    An extensive database on the toxicity and modes of action of the major industrial chemical, ethylene glycol (EG), has been developed over the past several decades. These studies have consistently identified the kidney as a primary target organ, with rats being more sensitive than mice and males more sensitive than females following chronic exposure. Renal toxicity has been associated with the terminal metabolite, oxalic acid which can precipitate with calcium to form crystals. EG also induces developmental toxicity, although these effects appear to require high-doses or accelerated dose-rates, and have been reported only in rats and mice. The developmental toxicity of EG has been attributed to the intermediate metabolite, glycolic acid (GA). The developmental toxicity of EG has been the subject of extensive research and regulatory review in recent years. Therefore, a physiologically based pharmacokinetic (PBPK) model was developed to integrate the extensive mode of action and pharmacokinetic data on EG and GA for use in developmental risk assessment. Metabolic rate constants and partition coefficients for EG and GA were estimated from in vitro studies. Other biochemical constants were optimized from appropriate in vivo pharmacokinetic studies. The resulting PBPK model includes inhalation, oral, dermal, intravenous and subcutaneous routes of administration. Metabolism of EG and GA were described in the liver with elimination via the kidneys. Several rat and human metabolism studies were used to validate the resulting PBPK model. Consistent with these studies, simulations indicated that the metabolism of EG to GA was essentially first-order (linear) up to 2500 mg/kg/day while the metabolism of GA saturated between bolus ethylene glycol doses of 200 and 1000 mg/kg/day. This saturation results in non-linear increases in blood GA concentrations, correlating with the developmental toxicity of EG. Pregnancy had no effect on maternal EG and GA kinetics over a broad dose

  7. Determination of the Impact of Glycolate on ARP and MCU Operations

    SciTech Connect

    Taylor-Pashow, K. M.L.; Peters, T. B.; Fondeur, F. F.; Shehee, T. C.; Washington, A. L.

    2012-12-13

    Savannah River Remediation (SRR) is evaluating an alternate flowsheet for the Defense Waste Processing Facility (DWPF) using glycolic acid as a reductant. An important aspect of the development of the glycolic acid flowsheet is determining if glycolate has any detrimental downstream impacts. Testing was performed to determine if there is any impact to the strontium and actinide sorption by monosodium titanate (MST) and modified monosodium titanate (mMST) or if there is an impact to the cesium removal, phase separation, or coalescer performance at the Modular Caustic-Side Solvent Extraction Processing Unit (MCU). Sorption testing was performed using both MST and modified MST (mMST) in the presence of 5000 and 10,000 ppm (mass basis) glycolate. 10,000 ppm is the estimated bounding concentration expected in the DWPF recycle stream based on DWPF melter flammable gas model results. The presence of glycolate was found to slow the removal of Sr and Pu by MST, while increasing the removal rate of Np. Results indicate that the impact is a kinetic effect, and the overall capacity of the material is not affected. There was no measurable effect on U removal at either glycolate concentration. The slower removal rates for Sr and Pu at 5000 and 10,000 ppm glycolate could result in lower DF values for these sorbates in ARP based on the current (12 hours) and proposed (8 hours) contact times. For the highest glycolate concentration used in this study, the percentage of Sr removed at 6 hours of contact decreased by 1% and the percentage of Pu removed decreased by nearly 7%. The impact may prove insignificant if the concentration of glycolate that is returned to the tank farm is well below the concentrations tested in this study. The presence of glycolate also decreased the removal rates for all three sorbates (Sr, Pu, and Np) by mMST. Similar to MST, the results for mMST indicate that the impact is a kinetic effect, and the overall capacity of the material is not affected. The

  8. 40 CFR 721.10111 - Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and diethylene glycol.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... diesters with benzoic acid and diethylene glycol. 721.10111 Section 721.10111 Protection of Environment... diesters with benzoic acid and diethylene glycol. (a) Chemical substance and significant new uses subject... benzoic acid and diethylene glycol (PMN P-04-510; CAS No. 610787-78-5) is subject to reporting under...

  9. 40 CFR 721.10111 - Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and diethylene glycol.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... diesters with benzoic acid and diethylene glycol. 721.10111 Section 721.10111 Protection of Environment... diesters with benzoic acid and diethylene glycol. (a) Chemical substance and significant new uses subject... benzoic acid and diethylene glycol (PMN P-04-510; CAS No. 610787-78-5) is subject to reporting under...

  10. 40 CFR 721.10110 - Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and neopentlyl glycol.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... diesters with benzoic acid and neopentlyl glycol. 721.10110 Section 721.10110 Protection of Environment... diesters with benzoic acid and neopentlyl glycol. (a) Chemical substance and significant new uses subject... benzoic acid and neopentlyl glycol (PMN P-04-509; CAS No. 610787-77-4) is subject to reporting under...

  11. 40 CFR 721.10110 - Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and neopentlyl glycol.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... diesters with benzoic acid and neopentlyl glycol. 721.10110 Section 721.10110 Protection of Environment... diesters with benzoic acid and neopentlyl glycol. (a) Chemical substance and significant new uses subject... benzoic acid and neopentlyl glycol (PMN P-04-509; CAS No. 610787-77-4) is subject to reporting under...

  12. 40 CFR 721.10111 - Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and diethylene glycol.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... diesters with benzoic acid and diethylene glycol. 721.10111 Section 721.10111 Protection of Environment... diesters with benzoic acid and diethylene glycol. (a) Chemical substance and significant new uses subject... benzoic acid and diethylene glycol (PMN P-04-510; CAS No. 610787-78-5) is subject to reporting under...

  13. 40 CFR 721.10111 - Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and diethylene glycol.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... diesters with benzoic acid and diethylene glycol. 721.10111 Section 721.10111 Protection of Environment... diesters with benzoic acid and diethylene glycol. (a) Chemical substance and significant new uses subject... benzoic acid and diethylene glycol (PMN P-04-510; CAS No. 610787-78-5) is subject to reporting under...

  14. 40 CFR 721.10110 - Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and neopentlyl glycol.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... diesters with benzoic acid and neopentlyl glycol. 721.10110 Section 721.10110 Protection of Environment... diesters with benzoic acid and neopentlyl glycol. (a) Chemical substance and significant new uses subject... benzoic acid and neopentlyl glycol (PMN P-04-509; CAS No. 610787-77-4) is subject to reporting under...

  15. 40 CFR 721.10110 - Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and neopentlyl glycol.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... diesters with benzoic acid and neopentlyl glycol. 721.10110 Section 721.10110 Protection of Environment... diesters with benzoic acid and neopentlyl glycol. (a) Chemical substance and significant new uses subject... benzoic acid and neopentlyl glycol (PMN P-04-509; CAS No. 610787-77-4) is subject to reporting under...

  16. 40 CFR 721.10110 - Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and neopentlyl glycol.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... diesters with benzoic acid and neopentlyl glycol. 721.10110 Section 721.10110 Protection of Environment... diesters with benzoic acid and neopentlyl glycol. (a) Chemical substance and significant new uses subject... benzoic acid and neopentlyl glycol (PMN P-04-509; CAS No. 610787-77-4) is subject to reporting under...

  17. 40 CFR 721.10111 - Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and diethylene glycol.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... diesters with benzoic acid and diethylene glycol. 721.10111 Section 721.10111 Protection of Environment... diesters with benzoic acid and diethylene glycol. (a) Chemical substance and significant new uses subject... benzoic acid and diethylene glycol (PMN P-04-510; CAS No. 610787-78-5) is subject to reporting under...

  18. 40 CFR 721.6980 - Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols polyglycidyl ethers (generic name). 721.6980... Substances § 721.6980 Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky... reporting. (1) The chemical substance dimer acids, polymer with polyalkylene glycol, bisphenol...

  19. 40 CFR 721.6980 - Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols polyglycidyl ethers (generic name). 721.6980... Substances § 721.6980 Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky... reporting. (1) The chemical substance dimer acids, polymer with polyalkylene glycol, bisphenol...

  20. 40 CFR 721.6980 - Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols polyglycidyl ethers (generic name). 721.6980... Substances § 721.6980 Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky... reporting. (1) The chemical substance dimer acids, polymer with polyalkylene glycol, bisphenol...

  1. Inhibition of heavy metal ion corrosion on aluminum in fresh water cooling systems using propylene glycol anti-freeze

    SciTech Connect

    Hack, H.P.; Corbett, R.; Krantz, B.

    1998-12-31

    Electronics cooling and environmental control systems are required in enclosed manned spaces such as the inside of spacecraft or submersibles. Because egress from such spaces may not be possible in a short time frame, coolant leaks must have minimum toxicity. For this reason, propylene glycol coolants are preferred over the traditional ethylene glycol coolants. Corrosion inhibitor formulations are well developed for ethylene glycol coolants, but there is concern that the inhibitor suite for propylene glycol systems may not be as mature. In particular, coolant systems with a mixture of aluminum and copper can develop heavy metal ion corrosion of the aluminum due to precipitation of copper ions from solution onto the aluminum. This type of accelerated corrosion of aluminum does not require electrical contact with copper, as is the case for galvanic corrosion, nor is significant coolant conductivity required for corrosion to occur. This paper presents a study of the ability of a commercial inhibited propylene glycol coolant to prevent heavy metal ion corrosion of aluminum when copper is also present in the coolant system. The inhibited propylene glycol`s performance is compared to that of reagent propylene glycol without inhibitors, a mature ethylene glycol inhibited coolant, and to tap water. The inhibitor suite in the inhibited propylene glycol was found to be as effective in controlling heavy metal ion corrosion as that of the inhibited ethylene glycol coolant, while uninhibited reagent propylene glycol was ineffective in controlling heavy metal ion corrosion.

  2. GLYCOL DEHYDRATOR BTEX AND VOC EMISSIONS TESTING RESULTS AT TWO UNITS IN TEXAS AND LOUISIANA - VOLUME II. APPENDICES

    EPA Science Inventory

    The report gives results of the collection of emissions tests data at two triethylene glycol (TEG) units to provide data for comparison to GRI-GLYCalc, a computer program developed to estimate emissions from glycol dehydrators. (NOTE: Glycol dehydrators are used in the natural ga...

  3. GLYCOL DEHYDRATOR BTEX AND VOC EMISSIONS TESTING RESULTS AT TWO UNITS IN TEXAS AND LOUISIANA - VOLUME I. TECHNICAL REPORT

    EPA Science Inventory

    The report gives results of the collection of emissions tests data at two triethylene glycol (TEG) units to provide data for comparison to GRI-GLYCalc, a computer program developed to estimate emissions from glycol dehydrators. (NOTE: Glycol dehydrators are used in the natural ga...

  4. GLYCOL DEHYDRATOR BTEX AND VOC EMISSIONS TESTING RESULTS AT TWO UNITS IN TEXAS AND LOUISIANA VOL. II: APPENDICES

    EPA Science Inventory

    The report gives results of the collection of emissions test data st two triethylene glycol units to provide data for the comparison to GRI-GLYCalc, a computer program developed to estimate emissions from glycol dehydrators. [NOTE: Glycol dehydrators are used in the natural gas i...

  5. GLYCOL DEHYDRATOR BTEX AND VOC EMISSIONS TESTING RESULTS AT TWO UNITS IN TEXAS AND LOUISIANA VOL. I: TECHNICAL REPORT

    EPA Science Inventory

    The report gives results of the collection of emissions tests data at two triethylene glycol units to provide data for comparison to GRI-GLYCalc, a computer program developed to estimate emissions from glycol dehydrators. (NOTE: Glycol dehydrators are used in the natural gas indu...

  6. LITERATURE REVIEW ON IMPACT OF GLYCOLATE ON THE 2H EVAPORATOR AND THE EFFLUENT TREATMENT FACILITY

    SciTech Connect

    Adu-Wusu, K.

    2012-05-10

    Glycolic acid (GA) is being studied as an alternate reductant in the Defense Waste Processing Facility (DWPF) feed preparation process. It will either be a total or partial replacement for the formic acid that is currently used. A literature review has been conducted on the impact of glycolate on two post-DWPF downstream systems - the 2H Evaporator system and the Effluent Treatment Facility (ETF). The DWPF recycle stream serves as a portion of the feed to the 2H Evaporator. Glycolate enters the evaporator system from the glycolate in the recycle stream. The overhead (i.e., condensed phase) from the 2H Evaporator serves as a portion of the feed to the ETF. The literature search revealed that virtually no impact is anticipated for the 2H Evaporator. Glycolate may help reduce scale formation in the evaporator due to its high complexing ability. The drawback of the solubilizing ability is the potential impact on the criticality analysis of the 2H Evaporator system. It is recommended that at least a theoretical evaluation to confirm the finding that no self-propagating violent reactions with nitrate/nitrites will occur should be performed. Similarly, identification of sources of ignition relevant to glycolate and/or update of the composite flammability analysis to reflect the effects from the glycolate additions for the 2H Evaporator system are in order. An evaluation of the 2H Evaporator criticality analysis is also needed. A determination of the amount or fraction of the glycolate in the evaporator overhead is critical to more accurately assess its impact on the ETF. Hence, use of predictive models like OLI Environmental Simulation Package Software (OLI/ESP) and/or testing are recommended for the determination of the glycolate concentration in the overhead. The impact on the ETF depends on the concentration of glycolate in the ETF feed. The impact is classified as minor for feed glycolate concentrations {le} 33 mg/L or 0.44 mM. The ETF unit operations that will have

  7. Retention properties of hydrophobically end-capped poly(ethylene glycol)s on a beta-cyclodextrin support.

    PubMed

    Karakasyan, Carole; Millot, Marie-Claude; Jaulmes, Alain; Vidal-Madjar, Claire

    2006-09-15

    High-performance liquid chromatography (HPLC) was used to examine the retention behavior of monomethoxypoly(ethylene glycol)s bearing one hydrophobic naphthyl end group (Nap-MPEG) on beta-cyclodextrin polymer (poly-beta-CD) immobilized on a silica support, under isocratic elution conditions and using water as mobile phase. Studies of retentions and theoretical plate heights H were conducted at infinite dilution by comparing the behavior of Nap-MPEGs having different molecular weight (750, 1000 and 5000 g/mol). The larger is its molecular size, the lower is the retention of the polymer. The linear increase of H with mobile phase velocity reveals slow mass-transfer kinetics arising from the restricted diffusion into the pores of the support. The complexation constants between the Nap-MPEGs and beta-CD in solution (around 500M(-1)) were determined from the decrease of retention observed by adding increasing concentrations of hydroxypropyl beta-CD into the eluent. The peak profiles in mass-overload conditions were studied by fitting a model based upon bi-Langmuir kinetics which assumes a non-uniform support having two types of binding sites and apparent adsorption rate constants are used to describe mass-transfer kinetics. A three-parameter adsorption equilibrium isotherm was sufficient to account for the modifications of peak shapes observed when increasing amounts of polymer were injected. This result indicates an interaction with a heterogeneous poly-beta-CD support mainly composed of low affinity groups, non-saturable in the range of polymer concentration studied. An upper limit was estimated for the equilibrium constant (<1000 M(-1)) characterizing the affinity of Nap-MPEG for the non-saturable sites of the poly-beta-CD support. Large affinity constants (8-9 x 10(4)M(-1)) were found for the interaction of Nap-MPEGs with a small percentage of active sites. PMID:16828487

  8. Impact of the propylene glycol-water-borax coolant on material recovery operations

    SciTech Connect

    Duerksen, W.K.; Taylor, P.A.

    1983-05-01

    The reaction of the propylene glycol-water-borax coolant with nitric acid has now been studied in some detail. This document is intended to provide a summary of the results. Findings are summarized under nine headings. Tests have also been conducted to determine if the new coolant would have any adverse effects on the uranium recycle systems. Experiments were scientifically designed after observation of the production operations so that accurate response to the immediate production concerns could be provided. Conclusions from these studies are: formation of glycol nitrates is very improbable; the reaction of concentrated (70%) nitric acid with pure propylene glycol is very violent and hazardous; dilution of the nitric acid-glycol mixture causes a drastic decrease in the rate and intensity of the reaction; the mechanism of the nitric acid propylene glycol reaction is autocatalytic in nitrous acid; no reaction is observed between coolant and 30% nitric acid unless the solution is heated; the coolant reacts fairly vigorously with 55% nitric acid after a concentration-dependent induction time; experiments showed that the dissolution of uranium chips that had been soaked in coolant proceeded at about the same rate as if the chips had not previously contacted glycol; thermodynamic calculations show that the enthalpy change (heat liberated) by the reaction of nitric acid (30%) with propylene glycol is smaller than if the same amount of nitric acid reacted with uranium. Each of these conclusions is briefly discussed. The effect of new coolant on uranium recycle operations is then briefly discussed.

  9. The influence of water mixtures on the dermal absorption of glycol ethers

    SciTech Connect

    Traynor, Matthew J.; Wilkinson, Simon C.; Williams, Faith M. . E-mail: F.M.Williams@ncl.ac.uk

    2007-01-15

    Glycol ethers are solvents widely used alone and as mixtures in industrial and household products. Some glycol ethers have been shown to have a range of toxic effects in humans following absorption and metabolism to their aldehyde and acid metabolites. This study assessed the influence of water mixtures on the dermal absorption of butoxyethanol and ethoxyethanol in vitro through human skin. Butoxyethanol penetrated human skin up to sixfold more rapidly from aqueous solution (50%, 450 mg/ml) than from the neat solvent. Similarly penetration of ethoxyethanol was increased threefold in the presence of water (50%, 697 mg/ml). There was a corresponding increase in apparent permeability coefficient as the glycol ether concentration in water decreased. The maximum penetration rate of water also increased in the presence of both glycol ethers. Absorption through a synthetic membrane obeyed Fick's Law and absorption through rat skin showed a similar profile to human skin but with a lesser effect. The mechanisms for this phenomenon involves disruption of the stratum corneum lipid bilayer by desiccation by neat glycol ether micelles, hydration with water mixtures and the physicochemical properties of the glycol ether-water mixtures. Full elucidation of the profile of absorption of glycol ethers from mixtures is required for risk assessment of dermal exposure. This work supports the view that risk assessments for dermal contact scenarios should ideally be based on absorption data obtained for the relevant formulation or mixture and exposure scenario and that absorption derived from permeability coefficients may be inappropriate for water-miscible solvents.

  10. Experimental Evidence for a Hydride Transfer Mechanism in Plant Glycolate Oxidase Catalysis*

    PubMed Central

    Dellero, Younès; Mauve, Caroline; Boex-Fontvieille, Edouard; Flesch, Valérie; Jossier, Mathieu; Tcherkez, Guillaume; Hodges, Michael

    2015-01-01

    In plants, glycolate oxidase is involved in the photorespiratory cycle, one of the major fluxes at the global scale. To clarify both the nature of the mechanism and possible differences in glycolate oxidase enzyme chemistry from C3 and C4 plant species, we analyzed kinetic parameters of purified recombinant C3 (Arabidopsis thaliana) and C4 (Zea mays) plant enzymes and compared isotope effects using natural and deuterated glycolate in either natural or deuterated solvent. The 12C/13C isotope effect was also investigated for each plant glycolate oxidase protein by measuring the 13C natural abundance in glycolate using natural or deuterated glycolate as a substrate. Our results suggest that several elemental steps were associated with an hydrogen/deuterium isotope effect and that glycolate α-deprotonation itself was only partially rate-limiting. Calculations of commitment factors from observed kinetic isotope effect values support a hydride transfer mechanism. No significant differences were seen between C3 and C4 enzymes. PMID:25416784

  11. Biodegradation of Ethylene Glycol by a Salt-Requiring Bacterium1

    PubMed Central

    Gonzalez, Carlos F.; Taber, Willard A.; Zeitoun, M. A.

    1972-01-01

    A gram-negative nonmotile rod which was capable of using 1,2-14C-ethylene glycol as a sole carbon source for growth was isolated from a brine pond, Great Salt Lake, Utah. The bacterium (ATCC 27042) required at least 0.85% NaCl for growth and, although the chloride ion was replaceable by sulfate ion, the sodium ion was not replaceable by potassium ion. The maximal concentration of salt tolerated for growth was approximately 12%. The bacterium was oxidase-negative when N,N-dimethyl-p-phenylenediamine was used and weakly positive when N,N,N′,N′-tetramethyl-p-phenylenediamine was used. It grows on many sugars but does not ferment them, it does not have an exogenous vitamin requirement, and it possesses a guanine plus cytosine ratio of 64.3%. Incorporation of ethylene glycol carbon into cell and respired CO2 was quantitated by use of radioactive ethylene glycol and a force-aerated fermentor. Glucose suppressed ethylene glycol metabolism. Cells grown on ethylene and propylene glycol respired ethylene glycol in a Warburg respirometer more rapidly than cells grown on glucose. Spectrophotometric evidence was obtained for oxidation of glycolate to glyoxylate by a dialyzed cell extract. PMID:4568254

  12. The effect of ethylene glycol on the phytovolatilization of 1,4-dioxane.

    PubMed

    Edwards, Maureen R A; Hetu, Marie-France; Columbus, Melanie; Silva, Anthony; Lefebvre, Daniel D

    2011-08-01

    Phytoremediation at contaminated sites is often complicated by the presence of more than one chemical However, the effects of common co-contaminants such as ethylene glycol on the phytoremediation of other chemicals, e.g., 1,4-dioxane, is not well understood. Field studies with DN34 poplar trees revealed a 28% decline in growth rate in response to 10 g/L ethylene glycol in the groundwater, thus indicating a significant and deleterious effect on tree viability, and likely, the plants' utility for phytoremediation. Thorough investigations using Arabidopsis thaliana, with its small size and rapid life cycle, indicated significant growth reduction at 10 g/L and complete inhibition of germination at 40 g/L ethylene glycol Ethylene glycol was almost as severe a stressor as the well characterized osmotic inhibitor, sorbitoL Watering potted trees with 10 g/L ethylene glycol reduced their growth by more than 50%, and similar results were observed in hydroponically grown poplar and willow trees. Under hydroponic conditions, 60 g/L ethylene glycol inhibited the phytovolatilization of l,4-dioxane by more than 80%, and all trees evapo-transpired 1,4-dioxane less efficiently than water. In fact, this efficiency differed between trees and the difference became more pronounced in the presence of ethylene glycol. PMID:21972497

  13. The effects on the rat testis of single inhalation exposures to ethylene glycol monoalkyl ethers, in particular ethylene glycol monomethyl ether.

    PubMed

    Samuels, D M; Doe, J E; Tinston, D J

    1984-01-01

    The effects of a single inhalation exposure to the rat of the saturated vapours derived from four ethylene glycol monoalkyl ethers have been investigated. No effects on the testis were observed following exposure to ethylene glycol isopropyl ether (EG ISOPE) and ethylene glycol butyl ether (EGBE), but there were marked reductions in testicular weight 14 days after exposure to ethylene glycol monomethyl ether (EGME) and ethylene glycol monoethyl ether (EGEE). Further studies were designed to establish the effect of a single exposure to EGME. Mature male albino rats were exposed to various levels of EGME vapour for a single 4-h period and killed 14 days later. Following this single exposure a dose-related decrease in testis weight was observed in rats exposed to 5,000, 2,500 or 1,250 ppm EGME. Histopathological examination revealed disordered spermatogenesis and tubular atrophy in these animals. Minimal degenerative changes were seen in the testis of rats exposed to 625 ppm EGME. When rats were examined at various time intervals after exposure to EGME vapour for 4 h, testis weight was reduced in rats examined 2 days after exposure to 2,500 and 1,000 ppm EGME and remained depressed when compared with control values for up to 19 days following exposure. Histopathological examination of the testis revealed disordered spermatogenesis in exposed animals evident at 1 day following exposure to either 2,500 or 1,00 ppm EGME. PMID:6595980

  14. Inhibitive Performance of Monoethylene Glycol on CO2 Corrosion of API 5L X52 Steel

    NASA Astrophysics Data System (ADS)

    Javidi, M.; Khodaparast, M.

    2015-04-01

    Monoethylene glycol has been utilized in wet natural gas transportation to avoid hydrate formation and corrosion. The inhibitive performance of monoethylene glycol (MEG) on CO2 corrosion of API 5L X52 steel in saline solution at 50 °C was studied using electrochemical techniques. Change in inhibition mechanism of MEG against CO2 corrosion was observed including the blocking of reaction sites by MEG in low concentration and slow down of corrosion reactions at high concentration. The presence of different concentrations of sodium chloride affects the corrosion rate in a different manner for rich and lean glycol solution.

  15. Allergic contact dermatitis to propyl gallate and pentylene glycol in an emollient cream.

    PubMed

    Foti, Caterina; Bonamonte, Domenico; Cassano, Nicoletta; Conserva, Anna; Vena, Gino A

    2010-05-01

    A 62-year-old man, with a 20-year history of seborrhoeic dermatitis, presented with a worsening of his dermatitis. He had previously been demonstrated to be allergic to various topical corticosteroids, so he had been using an emollient cream (Sebclair), containing piroctone olamine and various anti-inflammatory substances, for 6 months, with good effect. Patch testing to the cream and its ingredients revealed positive reactions to both propyl gallate and pentylene glycol. A positive reaction to propylene glycol was also detected, whereas patch testing to butylene glycol was negative. Complete remission followed avoidance of the offending substances. PMID:20546226

  16. Different metabolic fate of two carbons of glycolate in its conversion to serine in Euglena gracilis z

    SciTech Connect

    Yokota, A.; Komura, H.; Kitaoka, S.

    1985-11-01

    In previons work, extensive decarboxylation of glycolate carboxyl carbon during its metabolism in Euglena gracilis suggested occurrence of a metabolic pathway of glycolate different from that of higher C/sub 3/ plants. In the present report, the authors establish the Euglena glycolate pathway from characteristics of the decarboxylation of the carboxyl carbon and from the metabolic fate of hydroxymethyl carbon of glycolate. The ratio of the decarboxylation of the carboxyl carbon of glycolate to the total metabolized carbon increased with increasing metabolic rate in an asymptotic fashion. Metabolic products were also changed depending on the rate of metabolism of glycolate; glycine was the main product at the low rate of glycolate metabolism and the contribution of glycine was reversed by the increased contribution of evolved CO/sub 2/ at the high rates. Experiments with (2-/sup 14/C)glycolate showed that exogenously added formate and methionine caused accumulation of radioactive formate. Based on these results, they have proposed that the glycolate metabolism of E. gracilis consists of glycine and formate pathways and that the relative contribution of both pathways to the glycolate metabolism depends on the metabolic rate of glycolate.

  17. Safety Evaluation of Polyethylene Glycol (PEG) Compounds for Cosmetic Use

    PubMed Central

    Shin, Chan Young; Kim, Kyu-Bong

    2015-01-01

    Polyethylene glycols (PEGs) are products of condensed ethylene oxide and water that can have various derivatives and functions. Since many PEG types are hydrophilic, they are favorably used as penetration enhancers, especially in topical dermatological preparations. PEGs, together with their typically nonionic derivatives, are broadly utilized in cosmetic products as surfactants, emulsifiers, cleansing agents, humectants, and skin conditioners. The compounds studied in this review include PEG/PPG-17/6 copolymer, PEG-20 glyceryl triisostearate, PEG-40 hydrogenated castor oil, and PEG-60 hydrogenated castor oil. Overall, much of the data available in this review are on PEGylated oils (PEG-40 and PEG-60 hydrogenated castor oils), which were recommended as safe for use in cosmetics up to 100% concentration. Currently, PEG-20 glyceryl triisostearate and PEGylated oils are considered safe for cosmetic use according to the results of relevant studies. Additionally, PEG/PPG-17/6 copolymer should be further studied to ensure its safety as a cosmetic ingredient. PMID:26191379

  18. Biocompatible and target specific hydrophobically modified glycol chitosan nanoparticles.

    PubMed

    Yin, Wei; Li, Weiyi; Rubenstein, David A; Meng, Yizhi

    2016-01-01

    Cardiovascular disease is the leading cause of death in the United States. Atherosclerosis is a major cause for cardiovascular diseases. Drugs that treat atherosclerosis usually act nonspecifically. To enhance drug delivery specificity, the authors developed a hydrophobically modified glycol chitosan (HGC) nanoparticle that can specifically target activated endothelial cells. The biocompatibility of these nanoparticles toward red blood cells and platelets was evaluated through hemolysis, platelet activation, platelet thrombogenicity, and platelet aggregation assays. The biocompatibility of these nanoparticles toward vascular endothelial cells was evaluated by their effects on endothelial cell growth, metabolic activity, and activation. The results demonstrated that HGC nanoparticles did not cause hemolysis, or affect platelet activation, thrombogenicity, and aggregation capability in vitro. The nanoparticles did not impair vascular endothelial cell growth or metabolic activities in vitro, and did not cause cell activation either. When conjugated with intercellular adhesion molecular 1 antibodies, HGC nanoparticles showed a significantly increased targeting specificity toward activated endothelial cells. These results suggested that HGC nanoparticles are likely compatible toward red blood cells, platelets, and endothelial cells, and they can be potentially used to identify activated endothelial cells at atherosclerotic lesion areas within the vasculature, and deliver therapeutic drugs. PMID:27126597

  19. Fluoroalkylated polyethylene glycol as potential surfactant for perfluorocarbon emulsion.

    PubMed

    Peng, C A; Hsu, Y C

    2001-11-01

    So far, perfluorocarbon (PFC) emulsions have been manufactured based mainly on two surfactants, Pluronic F-68 and egg yolk phospholipids (EYP) for clinical use. However, they have been documented to induce inflammatory or allergic responses when PFC emulsions were injected into human bloodstream. The cause of these side effects is associated with the phagocytosis of emulsified PFC microparticles by cells such as macrophages. In order to lessen the side effects, it is logic to develop surfactants, which are more phagocytosis-resistant and biocompatible. In this study, a perfluoroalkylated polyethylene glycol (R(F)-PEG) surfactant was synthesized by reacting perfluorooctanoyl chloride (C7F15COCl) with PEG of molecular weigh 8000. Both R(F)-PEG 8000 and EYP were used to make PFC emulsions separately by an ultrasonic homogenizer. Individual PFC emulsions were then incubated with mouse macrophage J774A.1 cells to examine the degree of phagocytosis. From microscopic observation of cell morphology, our results showed that the process of phagocytosis was retarded to a large extend using the R(F)-PEG surfactant. We also harnessed 19F-NMR to quantitatively detect the amount of PFC emulsions phagocytosed by J774A.1 cells. 19F-NMR result was consistent with the qualitative microscopic observation aforementioned. PMID:11795633

  20. Micropallet arrays with poly(ethylene glycol) walls.

    PubMed

    Wang, Yuli; Salazar, Georgina To'a; Pai, Jeng-Hao; Shadpour, Hamed; Sims, Christopher E; Allbritton, Nancy L

    2008-05-01

    Arrays of releasable micropallets with surrounding walls of poly(ethylene glycol) (PEG) were fabricated for the patterning and sorting of adherent cells. PEG walls were fabricated between the SU-8 pallets using a simple, mask-free strategy. By utilizing the difference in UV-transmittance of glass and SU-8, PEG monomer was selectively photopolymerized in the space surrounding the pallets. Since the PEG walls are composed of a cross-linked structure, the stability of the walls is independent of the pallet array geometry and the properties of the overlying solution. Even though surrounded with PEG walls, the individual pallets were detached from the array by the mechanical force generated by a focused laser pulse, with a release threshold of 6 microJ. Since the PEG hydrogels are repellent to protein adsorption and cell attachment, the walls localized cell growth to the pallet top surface. Cells grown in the microwells formed by the PEG walls were released by detaching the underlying pallet. The released cells/pallets were collected, cultured and clonally expanded. The micropallet arrays with PEG walls provide a platform for performing single cell analysis and sorting on chip. PMID:18432343

  1. Crystallization studies of polyethylene -poly(ethylene glycol) graft copolymers

    NASA Astrophysics Data System (ADS)

    Mark, P. R.; Hovey, G. E.; Murthy, N. S.; Breitenkamp, K.; Kade, M.; Emerick, T.

    2006-03-01

    Structure and crystallization behavior of three copolymers obtained by grafting poly (ethylene glycol) (PEG) chains to polyethylene (PE) main chain was investigated by variable temperature x-ray diffraction and thermal analysis. The results show that PEG side chains and PE main chains crystallize into separate domains. This is especially true when grafted chains are long (50 and 100 repeat units), in which the PEG domains are same as in PEG homopolymer both in structure and in melting behavior. In the copolymer with shorter chains (25 repeat units), the PEG crystals are not distinct and melting is broad. The PEG domains can be dissolved in water or ethanol without altering the mechanical integrity of the film. PE crystallites in both samples are similar to that in PE homopolymer. For instance, the thermal expansion of the basal cell plane (a- and b-axes) of the PE domains agrees well with that of PE homopolymer over the entire temperature range from ambient to melt. However, the chain-axis dimension PE-lattice in the copolymer is shorter by ˜ 0.05 å and the basal dimensions are larger by ˜ 0.05 å. The changes in these dimensions due to the changes in the length of the grafted PEG chains were investigated.

  2. Natural and enhanced biodegradation of propylene glycol in airport soil.

    PubMed

    Toscano, Giuseppe; Colarieti, M Letizia; Anton, Attila; Greco, Guido; Biró, Borbála

    2014-01-01

    Aircraft de-icing fluids (ADF) are a source of water and soil pollution in airport sites. Propylene glycol (PG) is a main component in several commercial formulations of ADFs. Even though PG is biodegradable in soil, seasonal overloads may result in occasional groundwater contamination. Feasibility studies for the biostimulation of PG degradation in soil have been carried out in soil slurries, soil microcosms and enrichment cultures with and without the addition of nutrients (N and P sources, oligoelements), alternative electron acceptors (nitrate, oxygen releasing compounds) and adsorbents (activated carbon). Soil samples have been taken from the contaminated area of Gardermoen Airport Oslo. Under aerobic conditions and in the absence of added nutrients, no or scarce biomass growth is observed and PG degradation occurs by maintenance metabolism at constant removal rate by the original population of PG degraders. With the addition of nutrient, biomass exponential growth enhances aerobic PG degradation also at low temperatures (4 ° C) that occur at the high season of snowmelt. Anaerobic PG degradation without added nutrients still proceeds at constant rate (i.e. no biomass growth) and gives rise to reduced fermentation product (propionic acid, reduced Fe and Mn, methane). The addition of nitrate does not promote biomass growth but allows full PG mineralization without reduced by-products. Further exploitation on the field is necessary to fully evaluate the effect of oxygen releasing compounds and adsorbents. PMID:23828729

  3. Biodegradation of propylene glycol and associated hydrodynamic effects in sand.

    PubMed

    Bielefeldt, Angela R; Illangasekare, Tissa; Uttecht, Megan; LaPlante, Rosanna

    2002-04-01

    At airports around the world, propylene glycol (PG) based fluids are used to de-ice aircraft for safe operation. PG removal was investigated in 15-cm deep saturated sand columns. Greater than 99% PG biodegradation was achieved for all flow rates and loading conditions tested, which decreased the hydraulic conductivity of the sand by 1-3 orders of magnitude until a steady-state minimum was reached. Under constant loading at 120 mg PG/d for 15-30 d, the hydraulic conductivity (K) decreased by 2-2.5 orders of magnitude when the average linear velocity of the water was 4.9-1.4 cm/h. Variable PG loading in recirculation tests resulted in slower conductivity declines and lower final steady-state conductivity than constant PG feeding. After significant sand plugging, endogenous periods of time without PG resulted in significant but partial recovery of the original conductivity. Biomass growth also increased the dispersivity of the sand. PMID:12044070

  4. Optical clearing of skin tissue ex vivo with polyethylene glycol

    NASA Astrophysics Data System (ADS)

    Tuchina, D. K.; Genin, V. D.; Bashkatov, A. N.; Genina, E. A.; Tuchin, V. V.

    2016-01-01

    Alterations of the optical and structural (weight, thickness, and square) parameters of skin caused by polyethylene glycol (PEG) with molecular weights of 300 and 400 Da were studied experimentally. The objects of the study were ex vivo skin samples of albino laboratory rats. Collimated transmittance of the skin was measured in the wavelength range 500-900 nm. As a result of exposure to the agents, an increase in the collimated transmittance and a decrease in weight, thickness, and square of skin samples were observed. Analysis of the kinetics of parameters alterations allowed us to measure the diffusion coefficient of the agents in the skin as (1.83 ± 2.22) × 10-6 and (1.70 ± 1.47) × 10-6 cm2/s for PEG-300 and PEG-400, respectively, and the rate of alterations of the structural parameters. The results obtained in this study can be used for the improvement of existing and development of new methods of noninvasive diagnostics and therapy of subcutaneous diseases.

  5. Immediate-type hypersensitivity to polyethylene glycols: a review.

    PubMed

    Wenande, E; Garvey, L H

    2016-07-01

    Polyethylene glycols (PEGs) or macrogols are polyether compounds widely used in medical and household products. Although generally considered biologically inert, cases of mild to life-threatening immediate-type PEG hypersensitivity are reported with increasing frequency. Nevertheless, awareness of PEG's allergenic potential remains low, due to a general lack of suspicion towards excipients and insufficient product labelling. Information on immediate-type reactions to PEG is limited to anecdotal reports, and the potential for PEG sensitization and cross-sensitization to PEGylated drugs and structurally related derivatives is likely underestimated. Most healthcare professionals have no knowledge of PEG and thus do not suspect PEG's as culprit agents in hypersensitivity reactions. In consequence, patients are at risk of misdiagnosis and commonly present with a history of repeated, severe reactions to a range of unrelated products in hospital and at home. Increased awareness of PEG prevalence, PEG hypersensitivity, and improved access to PEG allergy testing, should facilitate earlier diagnosis and reduce the risk of inadvertent re-exposure. This first comprehensive review provides practical information for allergists and other healthcare professionals by describing the clinical picture of 37 reported cases of PEG hypersensitivity since 1977, summarizing instances where PEG hypersensitivity should be considered and proposing an algorithm for diagnostic management. PMID:27196817

  6. Mechanical properties of layered poly (ethylene glycol) gels.

    PubMed

    Skornia, S L; Bledsoe, J G; Kelso, B; Kuntz Willitz, R

    2007-01-01

    Poly(ethylene glycol) (PEG) hydrogels have become a popular material for biomedical applications because of their versatility in use and design. As these gels are readily crosslinked under UV, microfabrication techniques have been investigated to manufacture complex three dimensional structures to better mimic the in vivo environment. This work investigated whether a layering technique to fabricate gels offered sufficient strength between the layers to perform similarly in mechanical testing to unlayered gels. Two mechanical tests were performed: tensile tests and peel tests. The tensile tests, which examined sample gels whose test sections were crosslinked for different durations, demonstrated no statistical differences in elastic modulus between sample and control gels. As expected, a statistical increase in the elastic modulus was found with increased PEG concentration. Comparison of the yield stress between samples and controls illustrated differences with total crosslinking duration, which may be due to the decreased molecular weight of the chains with decreased crosslinking time. In peel tests, no statistical differences of maximum peel force were found between samples and controls. However, an increase in the maximum peel force was found with increasing concentration of PEG. Overall, this study demonstrates that the layering process described for the PEG gels has minimal impact on the tested mechanical properties of the system. As mechanical properties are critical to the design of tissue engineered devices, these results demonstrate that this fabrication method may be appropriate for further study as a scaffold for complex cellular systems. PMID:20799187

  7. Microfluidic Valves Made From Polymerized Polyethylene Glycol Diacrylate

    PubMed Central

    Rogers, Chad I.; Oxborrow, Joseph B.; Anderson, Ryan R.; Tsai, Long-Fang; Nordin, Gregory P.; Woolley, Adam T.

    2013-01-01

    Pneumatically actuated, non-elastomeric membrane valves fabricated from polymerized polyethylene glycol diacrylate (poly-PEGDA) have been characterized for temporal response, valve closure, and long-term durability. A ~100 ms valve opening time and a ~20 ms closure time offer valve operation as fast as 8 Hz with potential for further improvement. Comparison of circular and rectangular valve geometries indicates that the surface area for membrane interaction in the valve region is important for valve performance. After initial fabrication, the fluid pressure required to open a closed circular valve is ~50 kPa higher than the control pressure holding the valve closed. However, after ~1000 actuations to reconfigure polymer chains and increase elasticity in the membrane, the fluid pressure required to open a valve becomes the same as the control pressure holding the valve closed. After these initial conditioning actuations, poly-PEGDA valves show considerable robustness with no change in effective operation after 115,000 actuations. Such valves constructed from non-adsorptive poly-PEGDA could also find use as pumps, for application in small volume assays interfaced with biosensors or impedance detection, for example. PMID:24357897

  8. Intramolecular Hydrogen Bonds in Low-Molecular-Weight Polyethylene Glycol.

    PubMed

    Kozlowska, Mariana; Goclon, Jakub; Rodziewicz, Pawel

    2016-04-18

    We used static DFT calculations to analyze, in detail, the intramolecular hydrogen bonds formed in low-molecular-weight polyethylene glycol (PEG) with two to five repeat subunits. Both red-shifted O-H⋅⋅⋅O and blue-shifting C-H⋅⋅⋅O hydrogen bonds, which control the structural flexibility of PEG, were detected. To estimate the strength of these hydrogen bonds, the quantum theory of atoms in molecules was used. Car-Parrinello molecular dynamics simulations were used to mimic the structural rearrangements and hydrogen-bond breaking/formation in the PEG molecule at 300 K. The time evolution of the H⋅⋅⋅O bond length and valence angles of the formed hydrogen bonds were fully analyzed. The characteristic hydrogen-bonding patterns of low-molecular-weight PEG were described with an estimation of their lifetime. The theoretical results obtained, in particular the presence of weak C-H⋅⋅⋅O hydrogen bonds, could serve as an explanation of the PEG structural stability in the experimental investigation. PMID:26864943

  9. Coarse-grained models for aqueous polyethylene glycol solutions.

    PubMed

    Choi, Eunsong; Mondal, Jagannath; Yethiraj, Arun

    2014-01-01

    A new coarse-grained force field is developed for polyethylene glycol (PEG) in water. The force field is based on the MARTINI model but with the big multipole water (BMW) model for the solvent. The polymer force field is reparameterized using the MARTINI protocol. The new force field removes the ring-like conformations seen in simulations of short chains with the MARTINI force field; these conformations are not observed in atomistic simulations. We also investigate the effect of using parameters for the end-group that are different from those for the repeat units, with the MARTINI and BMW/MARTINI models. We find that the new BMW/MARTINI force field removes the ring-like conformations seen in the MARTINI models and has more accurate predictions for the density of neat PEG. However, solvent-separated-pairs between chain ends and slow dynamics of the PEG reflect its own artifacts. We also carry out fine-grained simulations of PEG with bundled water clusters and show that the water bundling can lead to ring-like conformations of the polymer molecules. The simulations emphasize the pitfalls of coarse-graining several molecules into one site and suggest that polymer-solvent systems might be a stringent test for coarse-grained force fields. PMID:24350686

  10. Diffusion characteristics of ethylene glycol in skeletal muscle.

    PubMed

    Oliveira, Luís M; Carvalho, Maria Inês; Nogueira, Elisabete M; Tuchin, Valery V

    2015-05-01

    Part of the optical clearing study in biological tissues concerns the determination of the diffusion characteristics of water and optical clearing agents in the subject tissue. Such information is sufficient to characterize the time dependence of the optical clearing mechanisms—tissue dehydration and refractive index (RI) matching. We have used a simple method based on collimated optical transmittance measurements made from muscle samples under treatment with aqueous solutions containing different concentrations of ethylene glycol (EG), to determine the diffusion time values of water and EG in skeletal muscle. By representing the estimated mean diffusion time values from each treatment as a function of agent concentration in solution, we could identify the real diffusion times for water and agent. These values allowed for the calculation of the correspondent diffusion coefficients for those fluids. With these results, we have demonstrated that the dehydration mechanism is the one that dominates optical clearing in the first minute of treatment, while the RI matching takes over the optical clearing operations after that and remains for a longer time of treatment up to about 10 min, as we could see for EG and thin tissue samples of 0.5 mm. PMID:25525766

  11. Effects of polyalkylene glycols and fatty acid soaps on properties of synthetic lubricating-cooling fluids

    SciTech Connect

    Stulii, A.A.

    1983-01-01

    The lack of any effect of the polyalkylene glycols on the series of properties of the fatty acid soaps was confirmed by replacing the PEG-35 in the synthetic lubricating-cooling fluid (LCF) by a polyethylene glycol with a molecular weight of 400 or 6000, a propylene oxide oligomer with a molecular weight of 700, or a copolymer of ethylene and propylene oxides (Pluronic 44, Pluriol PE-6400, Hydropol 200). Attempts to select surfactants and optimal concentrations in synthetic LCFs based on polyalkylene glycols. Indicates that of the studied soaps, those of the most interest are the triethanolamine soaps of individual C/sub 6/-C/sub 10/ fatty acids and commercial mixed C/sub 7/-C/sub 9/ synthetic fatty acids. Finds that the polyalkylene glycols and the indicated soaps supplement each other, imparting the required set of properties to the LCF.

  12. Heat-transfer tests of aqueous ethylene glycol solutions in an electrically heated tube

    NASA Technical Reports Server (NTRS)

    Bernardo, Everett; Eian, Carroll S

    1945-01-01

    As part of an investigation of the cooling characteristics of liquid-cooled engines, tests were conducted with an electrically heated single-tube heat exchanger to determine the heat-transfer characteristics of an-e-2 ethylene glycol and other ethylene glycol-water mixtures. Similar tests were conducted with water and commercial butanol (n-butyl alcohol) for check purposes. The results of tests conducted at an approximately constant liquid-flow rate of 0.67 pound per second (Reynolds number, 14,500 to 112,500) indicate that at an average liquid temperature 200 degrees f, the heat-transfer coefficients obtained using water, nominal (by volume) 30 percent-70 percent and 70 percent-30 percent glycol-water mixtures are approximately 3.8, 2.8, and 1.4 times higher, respectively, than the heat-transfer coefficients obtained using an-e-2 ethylene glycol.

  13. Evaluation of activated sludge for biodegradation of propylene glycol as an aircraft deicing fluid.

    PubMed

    Delorit, Justin D; Racz, LeeAnn

    2014-04-01

    Aircraft deicing fluid used at airport facilities is often collected for treatment or disposal in order to prevent serious ecological threats to nearby surface waters. This study investigated lab scale degradation of propylene glycol, the active ingredient in a common aircraft deicing fluid, by way of a laboratory-scale sequencing batch reactor containing municipal waste water treatment facility activated sludge performing simultaneous organic carbon oxidation and nitrification. The ability of activated sludge to remove propylene glycol was evaluated by studying the biodegradation and sorption characteristics of propylene glycol in an activated sludge medium. The results indicate sorption may play a role in the fate of propylene glycol in AS, and the heterotrophic bacteria readily degrade this compound. Therefore, a field deployable bioreactor may be appropriate for use in flight line applications. PMID:24851333

  14. Hemoglobin precipitation by polyethylene glycols leads to underestimation of membrane pore sizes.

    PubMed

    Quijano, Jairo C; Lemeshko, Victor V

    2008-12-01

    The size of pores formed in the plasma membrane by various substances is frequently determined using polyethylene glycols as osmotic protectants. In this work, we have found that the size of pores formed by saponin in the red blood cell membrane determined by hemolysis versus molecular weight of polyethylene glycol was different to that estimated by light dispersion of cell suspensions. After complete swelling of cells induced by saponin in semiisotonic salt media containing 150 mOsm PEG-4000 or PEG-3000, a significant increase in the light absorbance at 640 nm was developed resulting from the formation of hemoglobin precipitates. Easily sedimenting aggregates were also formed when the supernatant of lysed cells was added to the equiosmotic solutions of polyethylene glycols with molecular weight higher than 1000. We suggest that the real size of large pores could be underestimated due to the phenomenon of hemoglobin precipitation by polyethylene glycols. PMID:18692020

  15. Features of anodic niobium oxide formation in aqueous-organic electrolyte solutions (influence of ethylene glycol)

    SciTech Connect

    Bairachnyi, B.I.; Gomozov, V.P.; Lyashok, L.V.; Glagolev, S.E.

    1992-02-10

    The formation of anodic oxide films (AOFs) on valve metals in electrolytes with different compositions has received little attention. Earlier investigations dealt mainly with AOF growth and properties in aqueous solutions of mineral and organic acids and salts. Less research was done on electrolytes containing aqueous-organic solvents. An empirically formulated electrolyte with a water/ethylene glycol mixture as the solvent is widely employed in forming the dielectric for semiconductor oxide capacitors (SOCs). The mechanism by which ethylene glycol acts on AOF properties is still not wholly clear. It has been found that AOFs produced in an ethylene glycol electrolyte are bilaminar, with the outer layer being less corrosion-resistant. The degradation resistance and crystalline phase content of AOFs have also been studied. The objective of the present study was to examine the effect of ethylene glycol as solvent on AOF formation on niobium.

  16. Inhibited ethylene and propylene glycols for corrosion and freeze protection in water-based HVAC systems

    SciTech Connect

    Roo, A.M. de; Lee, B.W.

    1997-12-31

    Industrially inhibited ethylene and propylene glycols are used extensively to provide protection against equipment damage due to corrosion and freezing. This paper will describe the proper use of these glycols, including system preparation, fluid installation, and fluid maintenance. The impact of the use of these glycols on the operation of the system is discussed along with methods for overcoming any declines in heat transfer. From this discussion, it will become clear why automotive antifreeze formulations should not be used in heating, ventilating, and airconditioning (HVAC) systems. Also included are data on the physical properties of aqueous solutions of ethylene and propylene glycol, the concept of burst vs. freeze protection, typical results of corrosion tests, and methods to use to monitor the fluid for each application.

  17. Amended safety assessment of formaldehyde and methylene glycol as used in cosmetics.

    PubMed

    Boyer, Ivan J; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2013-01-01

    Formaldehyde and methylene glycol may be used safely in cosmetics if established limits are not exceeded and are safe for use in nail hardeners in the present practices of use and concentration, which include instructions to avoid skin contact. In hair-smoothing products, however, in the present practices of use and concentration, formaldehyde and methylene glycol are unsafe. Methylene glycol is continuously converted to formaldehyde, and vice versa, even at equilibrium, which can be easily shifted by heating, drying, and other conditions to increase the amount of formaldehyde. This rapid, reversible formaldehyde/methylene glycol equilibrium is distinguished from the slow, irreversible release of formaldehyde resulting from the so-called formaldehyde releaser preservatives, which are not addressed in this safety assessment (formaldehyde releasers may continue to be safely used in cosmetics at the levels established in their individual Cosmetic Ingredient Review safety assessments). PMID:24335968

  18. Separation of glycols from dilute aqueous solutions via complexation with boronic acids

    SciTech Connect

    Randel, L.A.; King, C.J.

    1991-07-01

    This work examines methods of separating low molecular weight glycols from dilute aqueous solution. Extraction into conventional solvents is generally not economical, since, in the literature reviewed, distribution ratios for the two- to four-carbon glycols are all less than one. Distribution ratios can be increased, however, by incorporating into the organic phase an extracting agent that will complex with the solute of interest. The extracting agent investigated in this work is 3-nitrophenylboronic acid (NPBA). NPBA, a boric acid derivative, reversibly complexes with many glycols. The literature on complexation of borate and related compounds with glycols, including mechanistic data, measurement techniques, and applications to separation processes, provides information valuable for designing experiments with NPBA and is reviewed herein. 88 refs., 15 figs., 24 tabs.

  19. IRIS Toxicological Review of Ethylene Glycol Mono-Butyl Ether (Egbe) (External Review Draft)

    EPA Science Inventory

    EPA has conducted a peer review of the scientific basis supporting the human health hazard and dose-response assessment of ethylene glycol monobutyl ether that will appear on the Integrated Risk Information System (IRIS) database.

  20. Molecular interactions and structures in ethylene glycol-ethanol and ethylene glycol-water solutions at 303 K on densities, viscosities, and refractive indices data

    NASA Astrophysics Data System (ADS)

    Deosarkar, S. D.; Ghatbandhe, A. S.

    2014-01-01

    Molecular interactions and structural fittings in binary ethylene glycol + ethanol (EGE, x EG = 0.4111-0.0418) and ethylene glycol + water (EGW, x EG = 0.1771-0.0133) mixtures were studied through the measurement of densities (ρ), viscosities (η), and refractive indices ( n D ) at 303.15 K. Excess viscosities (η E ), molar volumes ( V m ), excess molar volumes ( V {/m E }), and molar retractions ( R M ) of the both binary systems were computed from measured properties. The measured and computed properties have been used to understand the molecular interactions in unlike solvents and structural fittings in these binary mixtures.

  1. A study of ethylene glycol exposure and kidney function of aircraft de-icing workers.

    PubMed

    Gérin, M; Patrice, S; Bégin, D; Goldberg, M S; Vyskocil, A; Adib, G; Drolet, D; Viau, C

    1997-01-01

    Ethylene glycol levels were measured in 154 breathing zone air samples and in 117 urine samples of 33 aviation workers exposed to de-icing fluid (basket operators, de-icing truck drivers, leads and coordinators) studied during 42 worker-days over a winter period of 2 months at a Montreal airport. Ethylene glycol as vapour did not exceed 22 mg/m3 (mean duration of samples 50 min). Mist was quantified at higher levels in 3 samples concerning 1 coordinator and 2 basket operators (76-190 mg/m3, 45-118 min). In 16 cases workers' post-shift or next-morning urine contained quantities of ethylene glycol exceeding 5 mmol/mol creatinine (up to 129 mmol/mol creatinine), with most of these instances occurring in basket operators and coordinators, some of whom did not wear paper masks and/or were accidentally sprayed with de-icing fluid. Diethylene glycol was also found in a few air and urinary samples at levels around one tenth those of ethylene glycol. Urinary concentrations of albumin, beta-N-acetyl-glucosaminidase, beta-2-microglobulin and retinol-binding protein were measured and compared over various periods, according to subgroups based on exposure level and according to the frequency of extreme values. These analyses did not demonstrate acute or chronic kidney damage that could be attributed to working in the presence of ethylene glycol. In conclusion, this study does not suggest important health effects of exposure to de-icing fluid in this group of workers. Potential for overexposure exists, however, in certain work situations, and recommendations on preventive measures are given. In addition, these results suggest that other routes of absorption than inhalation, such as the percutaneous route, may be important and that urinary ethylene glycol may be a useful indicator of exposure to ethylene glycol. PMID:9138000

  2. Extraction of aromatic hydrocarbons by mixtures of diethylene glycol with N-formylmorpholine

    SciTech Connect

    Marusina, N.B.; Gaile, A.A.; Semenov, L.V.

    1995-12-20

    The authors studied physiochemical properties of mixtures of diethylene glycol with N-formylmorpholine and water and liquid-liquid phase equilibria in the systems heptane-toulene-mixed extractant (diethylene glycol N-formylmorpholine-water in a weight ratio of 66.5:28.5:5.0) at 100{degrees}C. The authors studied also the system consisting of the 62-105{degrees}C fraction of reforming naphtha and the same extractant at 70 and 100{degrees}C.

  3. Two alanine aminotranferases link mitochondrial glycolate oxidation to the major photorespiratory pathway in Arabidopsis and rice.

    PubMed

    Niessen, Markus; Krause, Katrin; Horst, Ina; Staebler, Norma; Klaus, Stephanie; Gaertner, Stefanie; Kebeish, Rashad; Araujo, Wagner L; Fernie, Alisdair R; Peterhansel, Christoph

    2012-04-01

    The major photorespiratory pathway in higher plants is distributed over chloroplasts, mitochondria, and peroxisomes. In this pathway, glycolate oxidation takes place in peroxisomes. It was previously suggested that a mitochondrial glycolate dehydrogenase (GlcDH) that was conserved from green algae lacking leaf-type peroxisomes contributes to photorespiration in Arabidopsis thaliana. Here, the identification of two Arabidopsis mitochondrial alanine:glyoxylate aminotransferases (ALAATs) that link glycolate oxidation to glycine formation are described. By this reaction, the mitochondrial side pathway produces glycine from glyoxylate that can be used in the glycine decarboxylase (GCD) reaction of the major pathway. RNA interference (RNAi) suppression of mitochondrial ALAAT did not result in major changes in metabolite pools under standard conditions or enhanced photorespiratroy flux, respectively. However, RNAi lines showed reduced photorespiratory CO(2) release and a lower CO(2) compensation point. Mitochondria isolated from RNAi lines are incapable of converting glycolate to CO(2), whereas simultaneous overexpression of GlcDH and ALAATs in transiently transformed tobacco leaves enhances glycolate conversion. Furthermore, analyses of rice mitochondria suggest that the side pathway for glycolate oxidation and glycine formation is conserved in monocotyledoneous plants. It is concluded that the photorespiratory pathway from green algae has been functionally conserved in higher plants. PMID:22268146

  4. Clinical Features of Reported Ethylene Glycol Exposures in the United States

    PubMed Central

    Jobson, Meghan A.; Hogan, Susan L.; Maxwell, Colin S.; Hu, Yichun; Hladik, Gerald A.; Falk, Ronald J.; Beuhler, Michael C.; Pendergraft, William F.

    2015-01-01

    Background Ethylene glycol is highly toxic and represents an important cause of poisonings worldwide. Toxicity can result in central nervous system dysfunction, cardiovascular compromise, elevated anion gap metabolic acidosis and acute kidney injury. Many states have passed laws requiring addition of the bittering agent, denatonium benzoate, to ethylene glycol solutions to reduce severity of exposures. The objectives of this study were to identify differences between unintentional and intentional exposures and to evaluate the utility of denatonium benzoate as a deterrent. Methods and Findings Using the National Poison Data System, we performed a retrospective analysis of reported cases of ethylene glycol exposures from January 2006 to December 2013. Outcome classification was summed for intentionality and used as a basis for comparison of effect groups. There were 45,097 cases of ethylene glycol exposures resulting in 154 deaths. Individuals more likely to experience major effects or death were older, male, and presented with more severe symptoms requiring higher levels of care. Latitude and season did not correlate with increased exposures; however, there were more exposures in rural areas. Denatonium benzoate use appeared to have no effect on exposure severity or number. Conclusion Deaths due to ethylene glycol exposure were uncommon; however, there were major clinical effects and more exposures in rural areas. Addition of denatonium benzoate was not associated with a reduction in exposures. Alternative means to deter ingestion are needed. These findings suggest the need to consider replacing ethylene glycol with alternative and less toxic agents. PMID:26566024

  5. Effect of glycol-based coolants on the suppression and recovery of platinum fuel cell electrocatalysts

    NASA Astrophysics Data System (ADS)

    Garsany, Yannick; Dutta, Sreya; Swider-Lyons, Karen E.

    2012-10-01

    We use cyclic and rotating disk electrode voltammetry to study glycol-based coolant formulations to show that individual constituents have either negligible or significant poisoning effects on the nanoscale Pt/carbon catalysts used in proton exchange membrane fuel cells. The base fluid in all these coolants is glycol (1, 3 propanediol), commercially available in a BioGlycol coolant formulation with an ethoxylated nonylphenol surfactant, and azole- and polyol-based non-ionic corrosion inhibitors. Exposure of a Pt/Vulcan carbon electrode to glycol-water or glycol-water-surfactant mixtures causes the loss of Pt electrochemical surface area (ECSA), but the Pt ECSA is fully recovered in clean electrolyte. Only mixtures with the azole corrosion inhibitor cause irreversible losses to the Pt ECSA and oxygen reduction reaction (ORR) activity. The Pt ECSA and ORR activity can only be recovered to within 70% of its initial values after aggressive voltammetric cycling to 1.50 V after azole poisoning. When poisoned with a glycol mixture containing the polyol corrosion inhibitor instead, the Pt ECSA and ORR activity is completely recovered by exposure to a clean electrolyte. The results suggest that prior to incorporation in a fuel cell, voltammetric evaluation of the constituents of coolant formulations is worthwhile.

  6. Mutagenicity of ethylene glycol ethers and of their metabolites in Salmonella typhimurium his-.

    PubMed

    Hoflack, J C; Lambolez, L; Elias, Z; Vasseur, P

    1995-02-01

    Ethylene glycol ethers, their aldehyde and their acid metabolites were evaluated for their mutagenicity with the Ames test. The Salmonella typhimurium his- tester strains TA 97a, TA 98, TA 100 and TA 102 were used with and without rat S9 mix. Ethylene glycol monomethyl ether, ethylene glycol monoethyl ether, ethylene glycol n-butyl ether and their corresponding aldehyde and acid derivatives were tested up to 10(-4) mol/plate (around 10 mg/plate) or up to cytotoxic concentrations. All tested substances gave negative results with TA 98, TA 100 and TA 102 either with or without S9 mix. In contrast, ethylene glycol n-butyl ether (EGBE) and the aldehyde metabolite of ethylene glycol monomethyl ether, methoxyacetaldehyde (MALD), displayed mutagenic potency in strain TA 97a with and without S9 mix at high concentrations. A significant number of revertants was obtained from 19 mumol/plate EGBE (2.2 mg/plate) and from 34 mumol/plate MALD (2.5 mg/plate). At these concentrations the level of revertants reached up to 7-fold and 3-fold the control values for EGBE and MALD respectively. PMID:7531287

  7. Separation of polyethylene glycols and amino-terminated polyethylene glycols by high-performance liquid chromatography under near critical conditions.

    PubMed

    Wei, Y-Z; Zhuo, R-X; Jiang, X-L

    2016-05-20

    The separation and characterization of polyethylene glycols (PEGs) and amino-substituted derivatives on common silica-based reversed-phase packing columns using isocratic elution is described. This separation is achieved by liquid chromatography under the near critical conditions (LCCC), based on the number of amino functional end groups without obvious effect of molar mass for PEGs. The mobile phase is acetonitrile in water with an optimal ammonium acetate buffer. The separation mechanism of PEG and amino-substituted PEG under the near LCCC on silica-based packing columns is confirmed to be ion-exchange interaction. Under the LCCC of PEG backbone, with fine tune of buffer concentration, the retention factor ratios for benzylamine and phenol in buffered mobile phases, α(benzylamine/phenol)-values, were used to assess the ion-exchange capacity on silica-based reversed-phase packing columns. To the best of our knowledge, this is the first report on separation of amino-functional PEGs independent of the molar mass by isocratic elution using common C18 or phenyl reversed-phase packing columns. PMID:27102303

  8. Enhanced incorporation of tritium into glycolate during photosynthesis by tobacco leaf tissue in the presence of tritiated water

    SciTech Connect

    Peterson, R.B.

    1982-01-01

    Tobacco (Nicotiana tabacum var. Havana Seed) leaf discs were allowed to photosynthesize for 3 to 20 minutes in the present of /sup 14/CO/sub 2/ and /sup 3/H/sub 2/O. Several metabolites of the Calvin cycle and photorespiratory pathway were isolated and purified and the /sup 3/H:/sup 14/C values measured. Glycolate had a 5- to 10-fold higher /sup 3/H:/sup 14/C than the Calvin cycle intermediate 3- phosphoglyceric acid, or its end product sucrose. The glycolate oxidase inhibitor ..cap alpha..-hydroxy-2-pyridinemethanesulfonic acid caused glycolate to accumulate in the tissue and lowered the /sup 3/H:/sup 14/C in glycolate to a value similar to that in 3-phosphoglyceric acid. Phosphoglycolate, a possible precursor of glycolate arising from the Calvin cycle, exhibited a /sup 3/H:/sup 14/C value similar 3-phosphoglyceric acid under all conditions. The finding of a /sup 3/H enrichment in glycolate suggests that another source of glycolate, possibly the reduction of glyoxylate, exists in leaf tissue. Analyses of incorporation of /sup 3/H into the pro-2R and pro-2S hydrogens of glycolate, in the presence and absence of ..cap alpha..-hydroxy-2-pyridinemethanesulfonic acid, suggest an alternative source of glycolate. Biochemical mechanisms to account for /sup 3/H enrichment into glycolate are evaluated.

  9. Photochemical reactions of photosystem II in ethylene glycol.

    PubMed

    Hillier, W; Lukins, P; Seibert, M; Wydrzynski, T

    1997-01-01

    The behavior of photosystem II (PSII) reactions was investigated under conditions of decreasing water content by the addition of increasing concentrations of ethylene glycol (EG). The photosynthetic activities were measured for PSII samples either directly in aqueous solutions of EG or in the standard buffer medium following EG treatment. Several effects on PSII arise upon exposure to EG. Below 50% EG there are no significant irreversible changes, although there is a slowing of the QA-reoxidation kinetics in the presence of EG. At concentrations of 50-70% EG, protein structural changes occur that include the release of the 16, 23, and 33 kDa extrinsic proteins and two of the catalytic Mn ions. For these samples, the capacity for O2 evolution is considerably reduced and the formation of donor side H2O2 is enhanced. In 60% EG, the nanosecond components in the rate of P680+ reduction are converted entirely to microsecond kinetics which upon return of the sample to the standard buffer medium are partially restored, indicating that EG has a reversible, solvent effect on the PSII donor side. At concentrations of EG > 70% chlorophyll fluorescence measurements reveal reversible increases in the FO level concomitant with the generation and disappearance of a 5 microseconds decay component in the P680+ reduction kinetics. This result may indicate a solvent-induced uncoupling of the light harvesting pigment bed from the reaction center complex. As the EG concentration is increased to 80-100%, there is an irreversible loss of the primary charge separation. The use of EG as a cryoprotectant and as a water-miscible organic solvent for PSII is discussed. PMID:8993320

  10. Distraction induced Enterogenesis: A unique mouse model using polyethylene glycol

    PubMed Central

    Okawada, Manabu; Maria, Haytham Mustafa; Teitelbaum, Daniel H.

    2011-01-01

    Background/Purpose Recent studies have demonstrated that the small intestine can be lengthened by applying mechanical forces to the bowel lumen – distraction-induced enterogenesis. However, the mechanisms which account for this growth are unknown, and might be best examined using a mouse model. The purpose of this study is to establish the feasibility of developing distractive-induced small bowel growth in mouse. Methods 12-week old C57BL/6J mice had a jejunal segment taken out of continuity, and distended with polyethylene glycol (PEG: 3350 KDa); this group was compared to a control group without stretching. Segment length and diameter were measured intra-operatively and after 5 days. Villus height, crypt depth, muscle thickness in the isolated segment were assessed. Rate of epithelial cell proliferation (5-bromo-2-deoxyuridine: BrdU incorporation) in crypt was also examined. The mucosal mRNA expression of targeted factors were performed to investigate potential mechanisms of which might lead to distraction-induced enterogenesis. Results At harvest, the PEG-stretch group showed a significant increase in length and diameter versus controls. Villus height, crypt depth and muscular layer thickness increased in the PEG group. The PEG group also showed significantly increased rates of epithelial cell proliferation versus controls. Real-time PCR showed a trend toward higher β-catenin and c-myc mRNA expression in the PEG stretched group; however, this difference was not statistically significant. Conclusions Radial distraction-induced enterogenesis with PEG is a viable method for increasing small intestinal length and diameter. This model may provide a new method for studying the mechanisms leading to distraction-induced enterogenesis. PMID:21605872

  11. Interaction between water and poly(vinylpyrrolidone) containing polyethylene glycol.

    PubMed

    Hamaura, T; Newton, J M

    1999-11-01

    Information on the interaction between water and polymers is indispensable for manufacturing solid dispersion of a drug by hot-melt extrusion because this interaction affects various properties of the water-polymer mixtures, such as their viscoelastic properties. In this study, poly(vinylpyrrolidone) K30 (PVP) containing 0%, 10%, and 20% poly(ethylene glycol) 400 (PEG) was used as model amorphous polymers. The interaction of water with these polymers was assessed by the evaluation of the glass transition temperature (Tg), the point on the isotherm corresponding to the weight of sorbed water required to form a complete monolayer on the solid surface (apparent Wm), and the maximal amount of nonfreezing water, which were measured by differential scanning calorimetry and water sorption isotherms. In all of the systems with a water content below a certain water fraction (0.1 for PVP, 0.12 for PVP-PEG 10%, and 0.16 for PVP-PEG 20%), the Tg values were successfully predicted using theoretical equations, whereas the experimental Tg values were higher than predicted for those with a water content above these water fraction levels. In addition, these values of water fraction are similar to the apparent W(m) values determined using the Guggenheim-Anderson-DeBoer (GAB) equation (0.110, 0.117, and 0.147 weight fraction of water for PVP, PVP-PEG 10%, and PVP-PEG 20%, respectively). Nonfreezing water is detected above 0.47, 0.49, and 0.51 weight fraction of water for PVP, PVP-PEG 10%, and PVP-PEG 20%, respectively. Miscibility between water and PVP or PVP-PEG seems to change according to the water content in the system. All parameters increase with the concentration of PEG in the sample. This may be explained by the fact that PEG has a larger number of polymer repeating units, which may therefore interact with water more than PVP. PMID:10564074

  12. Myocardial matrix-polyethylene glycol hybrid hydrogels for tissue engineering

    NASA Astrophysics Data System (ADS)

    Grover, Gregory N.; Rao, Nikhil; Christman, Karen L.

    2014-01-01

    Similar to other protein-based hydrogels, extracellular matrix (ECM) based hydrogels, derived from decellularized tissues, have a narrow range of mechanical properties and are rapidly degraded. These hydrogels contain natural cellular adhesion sites, form nanofibrous networks similar to native ECM, and are biodegradable. In this study, we expand the properties of these types of materials by incorporating poly(ethylene glycol) (PEG) into the ECM network. We use decellularized myocardial matrix as an example of a tissue specific ECM derived hydrogel. Myocardial matrix-PEG hybrids were synthesized by two different methods, cross-linking the proteins with an amine-reactive PEG-star and photo-induced radical polymerization of two different multi-armed PEG-acrylates. We show that both methods allow for conjugation of PEG to the myocardial matrix by gel electrophoresis and infrared spectroscopy. Scanning electron microscopy demonstrated that the hybrid materials still contain a nanofibrous network similar to unmodified myocardial matrix and that the fiber diameter is changed by the method of PEG incorporation and PEG molecular weight. PEG conjugation also decreased the rate of enzymatic degradation in vitro, and increased material stiffness. Hybrids synthesized with amine-reactive PEG had gelation rates of 30 min, similar to the unmodified myocardial matrix, and incorporation of PEG did not prevent cell adhesion and migration through the hydrogels, thus offering the possibility to have an injectable ECM hydrogel that degrades more slowly in vivo. The photo-polymerized radical systems gelled in 4 min upon irradiation, allowing 3D encapsulation and culture of cells, unlike the soft unmodified myocardial matrix. This work demonstrates that PEG incorporation into ECM-based hydrogels can expand material properties, thereby opening up new possibilities for in vitro and in vivo applications.

  13. Ethylene glycol ethers and risks of spontaneous abortion and subfertility.

    PubMed

    Correa, A; Gray, R H; Cohen, R; Rothman, N; Shah, F; Seacat, H; Corn, M

    1996-04-01

    Potential reproductive effects from occupational exposures to ethylene glycol ethers (EGE) are of concern since these organic solvents have been used widely in industry, and their reproductive toxicity has been well documented in animal studies. For determination of whether occupational exposure to EGE was associated with increased risks of spontaneous abortion and subfertility (i.e., taking more than 1 year of unprotected intercourse to conceive), a retrospective cohort study was conducted among workers at two semiconductor manufacturing plants in the eastern United States in 1980-1989 as part of a larger evaluation of reproductive health. Reproductive and occupational histories were obtained from interviews of semiconductor manufacturing workers and spouses. Assessment of potential exposure to mixtures containing EGE (none, low, medium, and high) was based on reported processes and company records. There were 1,150 pregnancies to semiconductor manufacturers, 561 to female employees and 589 to wives of male employees. Among female manufacturers, potential exposure to mixtures containing EGE was associated with increased risks of spontaneous abortion (relative risk in the high exposure group = 2.8; 95% confidence interval (CI) 1.4-5.6) and subfertility (odds ratio in the high exposure group = 4.6; 95% CI 1.6-13.3). Both of these risks exhibited a dose-response relation with potential EGE exposure (p for trend = 0.02). Among spouses of male manufacturers potentially exposed to mixtures containing EGE, there was no increased risk of spontaneous abortion, but there was a nonsignificant increased risk of subfertility (odds ratio in the high exposure group = 1.7; 95% CI 0.7-4.3). PMID:8651233

  14. A course-grained model for polyethylene glycol polymer

    SciTech Connect

    Nicholson, Don M; Wang, Qifei; Keffer, David J

    2011-01-01

    A coarse-grained (CG) model of polyethylene glycol (PEG) was developed and implemented in CG molecular dynamics (MD) simulations of PEG chains with degree of polymerization (DP) 20 and 40. In the model, two repeat units of PEG are grouped as one CG bead. Atomistic MD simulation of PEG chains with DP = 20 was first conducted to obtain the bonded structural probability distribution functions (PDFs) and nonbonded pair correlation function (PCF) of the CG beads. The bonded CG potentials are obtained by simple inversion of the corresponding PDFs. The CG nonbonded potential is parameterized to the PCF using both an inversion procedure based on the Ornstein-Zernike equation with the Percus-Yevick approximation (OZPY{sup -1}) and a combination of OZPY{sup -1} with the iterative Boltzmann inversion (IBI) method (OZPY{sup -1}+IBI). As a simple one step method, the OZPY{sup -1} method possesses an advantage in computational efficiency. Using the potential from OZPY{sup -1} as an initial guess, the IBI method shows fast convergence. The coarse-grained molecular dynamics (CGMD) simulations of PEG chains with DP = 20 using potentials from both methods satisfactorily reproduce the structural properties from atomistic MD simulation of the same systems. The OZPY{sup -1}+IBI method yields better agreement than the OZPY{sup -1} method alone. The new CG model and CG potentials from OZPY{sup -1}+IBI method was further tested through CGMD simulation of PEG with DP = 40 system. No significant changes are observed in the comparison of PCFs from CGMD simulations of PEG with DP = 20 and 40 systems indicating that the potential is independent of chain length.

  15. Composition-explicit distillation curves of diesel fuel with glycol ether and glycol ester oxygenates: fuel analysis metrology to enable decreased particulate emissions.

    PubMed

    Smith, Beverly L; Ott, Lisa S; Bruno, Thomas J

    2008-10-15

    We recently introduced several important improvements in the measurement of distillation curves of complex fluids. The modifications to the classical measurement provide for (1) a composition-explicit data channel for each distillate fraction (for both qualitative and quantitative analysis), (2) temperature measurements that are true thermodynamic state points that can be modeled with an equation of state, (3) temperature, volume, and pressure measurements of low uncertainty suitable for equation of state development, (4) consistency with a century of historical data, (5) an assessment of the energy content of each distillate fraction, (6) trace chemical analysis of each distillate fraction, and (7) corrosivity assessment of each distillate fraction. We have applied the new method to the measurement of rocket propellant, gasolines, jet fuels, and hydrocarbon crude oils. In this paper we presentthe application of the technique to representative diesel fuel and mixtures of diesel fuel with some of the more promising oxygenating agents; namely, the glycol ethers and glycol esters: tri(propylene glycol) methyl ether (TPM), dibutyl maleate (DBM), and an 80/ 20 (vol/vol) mixture of diethylene glycol methyl ether (DGME) + 1,2-dimethoxyethane (DME) a mixture often referred to as Cetaner. We present not only the distillation curves but also a chemical characterization of each fraction, and discuss the contrasts between the various mixtures. The measurements are significant as an environmental design tool for decreased particulate emissions. PMID:18983093

  16. Heat sterilization of bioindicators in propylene glycol and propylene glycol-water mixtures: arrhenius equation, thermodynamic data, and Z values.

    PubMed

    Philipp, B; Sucker, H

    1990-12-01

    Our interest in calculating the thermodynamic data by means of the Arrhenius equation was based on two observation: (a) the thermal death time increases considerably when the bioindicators Bacillus subtilis var. niger and Bacillus stearothermophilus are sterilized in nonaqueous hydrophilic solutions as found in propylene glycol (PG) with low water concentrations; and (b) the inactivation kinetics of Bac. stearothermophilus does not follow a first-order reaction. The frequency factor A and the entropy of activation delta S* have the highest values in water and the lowest value in PG; delta S* for Bac. stearothermophilus in water is 812 J/mol K; however, in PG it is -9.6 J/mol K. A good correlation between delta S* and the enthalpy delta H* is found, indicating possible protein denaturation during thermal inactivation. The moderate positive and negative delta S* values in PG and PG with low water concentrations might be explained by (a) rigid conformation of proteins due to stabilization and (b) slow reaction, making the complex a less probable structure, when the activated complex is built only under considerable rearrangement of the structure of the reactant molecules. The opposite was observed with the Z and Z* values, the latter being defined as Z values of nonlogarithmic survival curves. The Z values increase with increasing concentrations of PG, i.e., for Bac. subtilis of Z = 8 degrees C in water up to Z = 23 degrees C in PG and for Bac. stearothermophilus of Z = 6 degrees C up to Z* = 27 degrees C.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2128895

  17. Potentiation of aquatic pollution by ethylene glycol with regard to the aquatic angiosperm, Lemna gibba

    SciTech Connect

    Thomas, D.A.; Barber, J.T.; Yatsu, L.Y.; Ensley, H.E.

    1995-12-31

    Ethylene glycol is usually thought of as a benign component of urban runoff. Thus, its EC50 value, with regard to the vegetative growth of axenically grown Lemna gibba, is relatively high, viz. 164 mM. Ethylene glycol is not metabolized by Lemna but growth is demonstrably stimulated at concentrations below 75 mM. In the presence of ethylene glycol, the fronds of duckweed are dark green, translucent and the growth medium contains gas bubbles of carbon dioxide which result from an enhanced uptake of sucrose from the growth medium and its subsequent respiration. The uptake is a non-specific effect since the uptake of various other compounds, including water, is enhanced when duckweed is grown in the presence of ethylene glycol. The increased uptake of water, sucrose, inorganic ions and organic compounds results from an increased permeability due to the creation of intercellular holes in the aerenchymatous tissues of the ethylene glycol-treated plants. The mechanism by which ethylene glycol causes the holes is unknown but may involve a disruption in lipid metabolism since the hydrophobicity of the fronds is altered and their lipid composition is changed. The significance of this phenomenon is that toxicants, just like innocuous substances, are taken up in increased amounts by treated plants and as a result their toxicities are increased with regard to duckweed as evidenced by a decrease in their effective concentrations, often of more than 3-fold. These results suggest that although ethylene glycol itself may be benign, its presence in polluted waters containing other toxicants may potentiate the effects of those pollutants.

  18. Glycol ethers - validation procedures for tube/pump and dosimeter monitoring methods

    SciTech Connect

    Langhorst, M.L.

    1984-06-01

    Methods were developed and validated for personal monitoring of exposures to airborne glycol ethers, both short-term and long-term time-weighted-averages. Either a 600 mg charcoal tube or a 780 mg silica gel tube is recommended for monitoring nine glycol ethers, depending upon the humidity and other organic compounds to be monitored. The charcoal tube allows maximum sensitivity and is unaffected by high humidity conditions. Two-phase solvent desorption with CS/sub 2/ and water allows aqueous phase recoveries of DOWANOLEM, EM, PM, EE, DM, DPM, and TM glycol ethers. DOWANOL EB, DB, and TPM glycol ethers are partitioned between the two layers, necessitating chromatographic analysis of both layers. The silica gel tube method can be used to monitor all nine glycol ethers tested, but is affected by high humidity conditions, resulting in significant breakthrough of th more volatile glycol ethers. The 3M organic vapor monitor can accurately and conveniently determine exposure concentrations for DOWANOL EM, EE, and PM glycol ethers, but sensitivities may be inadequate for sampling periods less than one hour. These methods were validated at levels down to 0.1 times the Dow internal exposure guidelines for those substances with DOW exposure guidelines and well above the current ACGIH and OSHA guidelines. This paper also illustrates validation procedures for tube/pump and dosimeter methods allowing good definition of method accuracy and precision. Some screening experiments are described for diffusional dosimeters to check the most important parameters in a minimum of time. This methodology will allow assessment of human airborne exposures relative to the new toxicology data avilable on animals.

  19. Glycol ethers--validation procedures for tube/pump and dosimeter monitoring methods.

    PubMed

    Langhorst, M L

    1984-06-01

    Methods were developed and validated for personal monitoring of exposures to airborne glycol ethers, both short-term and long-term time-weighted-averages. Either a 600 mg charcoal tube or a 780 mg silica gel tube is recommended for monitoring nine glycol ethers, depending upon the humidity and other organic compounds to be monitored. The charcoal tube allows maximum sensitivity and is unaffected by high humidity conditions. Two-phase solvent desorption with CS2 and water allows aqueous phase recoveries of DOWANOL EM, PM, EE, DM, DPM, and TM glycol ethers. DOWANOL EB, DB and TPM glycol ethers are partitioned between the two layers, necessitating chromatographic analysis of both layers. The silica gel tube method can be used to monitor all nine glycol ethers tested, but is affected by high humidity conditions, resulting in significant breakthrough of the more volatile glycol ethers. The 3M organic vapor monitor can accurately and conveniently determine exposure concentrations for DOWANOL EM, EE, and PM glycol ethers, but sensitivities may be inadequate for sampling periods less than one hour. These methods were validated at levels down to 0.1 times the Dow internal exposure guidelines for those substances with Dow exposure guidelines and well above the current ACGIH and OSHA guidelines. This paper also illustrates validation procedures for tube/pump and dosimeter methods, allowing good definition of method accuracy and precision. Some screening experiments are described for diffusional dosimeters to check the most important parameters in a minimum of time. This methodology will allow assessment of human airborne exposures relative to the new toxicology data available on animals. PMID:6331145

  20. Design and synthesis of multifunctional poly(ethylene glycol)s using enzymatic catalysis for multivalent cancer drug delivery

    NASA Astrophysics Data System (ADS)

    Seo, Kwang Su

    The objective of this research was to design and synthesize multifunctional poly(ethylene glycol)s (PEG)s using enzyme-catalyzed reactions for multivalent targeted drug delivery. Based on computer simulation for optimum folate binding, a four-arm PEG star topology with Mn = 1000 g/mol was proposed. First, a four-functional core based on tetraethylene glycol (TEG) was designed and synthesized using transesterification and Michael addition reactions in the presence of Candida antarctica lipase B (CALB) as a biocatalyst. The four-functional core (HO)2-TEG-(OH)2 core was successfully prepared by the CALB-catalyzed transesterification of vinyl acrylate (VA) with TEG and then Michael addition of diethanolamine to the resulting TEG diacrylate with/without the use of solvent. The functional PEG arms with fluorescein isothiocyanate (FITC) and folic acid (FA) were prepared using both traditional organic chemistry and enzyme-catalyzed reactions. FITC was reacted with the amine group of H2N-PEG-OH in the presence of triethylamine via nucleophilic addition onto the isothiocyanate group. Then, divinyl adipate (DVA) was transesterified with the FITC-PEG-OH product in the presence of CALB to produce the FITC-PEG vinyl ester that will be attached to the four-functional core via CALC-catalyzed transesterification. For the synthesis of FA-PEG vinyl ester arm, DVA was first reacted with PEG-monobenzyl ether (BzPEG-OH) in bulk in the presence of CALB. The BzPEG vinyl ester was then transesterified with 12-bromo-1-dodecanol in the presence of CALB. Finally, BzPEG-Br was attached to FA exclusively in the gamma position using a new method. The thesis also discusses fundamental studies that were carried out in order to get better understanding of enzyme catalyzed transesterification and Michael addition reactions. First, in an effort to investigate the effects of reagent and enzyme concentrations in transesterification, vinyl methacrylate (VMA) was reacted with 2-(hydroxyethyl) acrylate (2

  1. Aqueous sols of oligo(ethylene glycol) surface decorated polydiacetylene vesicles for colorimetric detection of Pb 2+.

    PubMed

    Narkwiboonwong, Pat; Tumcharern, Gamolwan; Potisatityuenyong, Anupat; Wacharasindhu, Sumrit; Sukwattanasinitt, Mongkol

    2011-01-15

    A series of ethylene glycol (EG), triethylene glycol (3EG) and pentaethylene glycol (5EG) esters of 10,12-pentacosadiynoic acid (PCDA) are synthesized. The glycol ester lipids can be hydrated and well dispersed in water but they cannot form polydiacetylenes upon UV irradiation. They however can be mixed with PCDA up to 30 mol% and polymerized to form blue sols. The mixed polydiacetylene sols show blue to red thermochromic transition with two-stepped transition temperatures. The first transition temperature decreases with the increase of the glycol ester content as well as the length of their chains indicating greater fluidity of the self-assembled structure due to less collaborative hydrogen bonding among the lipid head groups. These mixed polydiacetylene sol prepared from 30 mol% of the penta(ethylene glycol) ester show linear colorimetric response selectively to Pb(2+) in the range of 5-30 μM. PMID:21147331

  2. DETERMINATION OF THE IMPACT OF GLYCOLATE ON ARP AND MCU OPERATIONS

    SciTech Connect

    Taylor-Pashow, K.; Peters, T.; Shehee, T.

    2012-06-04

    Savannah River Remediation (SRR) is evaluating an alternate flowsheet for the Defense Waste Processing Facility (DWPF) using glycolic acid as a reductant. An important aspect of the development of the glycolic acid flowsheet is determining if glycolate has any detrimental downstream impacts. Testing was performed to determine if there is any impact to the strontium and actinide sorption by monosodium titanate (MST) and modified monosodium titanate (mMST) or if there is an impact to the cesium removal at the Modular Caustic-Side Solvent Extraction Processing Unit (MCU). Sorption testing was performed using both MST and modified MST (mMST) in the presence of 5,000 and 10,000 ppm (mass basis) glycolate. 10,000 ppm is the estimated bounding concentration expected in the DWPF recycle stream based on DWPF melter flammable gas model results. The presence of glycolate was found to slow the removal of Sr and Pu by MST, while increasing the removal rate of Np. Results indicate that the impact is a kinetic effect, and the overall capacity of the material is not affected. There was no measurable effect on U removal at either glycolate concentration. The slower removal rates for Sr and Pu at 5,000 and 10,000 ppm glycolate could result in lower DF values for these sorbates in ARP based on the current (12 hours) and proposed (8 hours) contact times. For the highest glycolate concentration used in this study, the percentage of Sr removed at 6 hours of contact decreased by 1% and the percentage of Pu removed decreased by nearly 7%. The impact may prove insignificant if the concentration of glycolate that is returned to the tank farm is well below the concentrations tested in this study. The presence of glycolate also decreased the removal rates for all three sorbates (Sr, Pu, and Np) by mMST. Similarly to MST, the results for mMST indicate that the impact is a kinetic effect, and the overall capacity of the material is not affected. The presence of glycolate did not change the lack

  3. Engineering Poly(ethylene glycol) Materials to Promote Cardiogenesis

    NASA Astrophysics Data System (ADS)

    Smith, Amanda Walker

    Heart failure is one of the leading causes of death worldwide, and the current costs of treatment put a significant economic burden on our societies. After an infarction, fibrotic tissue begins to form as part of the heart failure cascade. Current options to slow this process include a wide range of pharmaceutical agents, and ultimately the patient may require a heart transplant. Innovative treatment approaches are needed to bring down costs and improve quality of life. The possibility of regenerating or replacing damaged tissue with healthy cardiomyocytes is generating considerable excitement, but there are still many obstacles to overcome. First, while cell injections into the myocardium have demonstrated slight improvements in cardiac function, the actual engraftment of transplanted cells is very low. It is anticipated that improving engraftment will boost outcomes. Second, cellular differentiation and reprogramming protocols have not yet produced cells that are identical to adult cardiomyocytes, and immunogenicity continues to be a problem despite the advent of autologously derived induced pluripotent stem cells. This dissertation will explore biomaterials approaches to addressing these two obstacles. Tissue engineering scaffolds may improve cell engraftment by providing bioactive factors, preventing cell anoikis, and reducing cell washout by blood flow. Poly(ethylene glycol) (PEG) is often used as a coating to reduce implant rejection because it is highly resistant to protein adsorption. Because fibrosis of a material in contact with the myocardium could cause arrhythmias, PEG materials are highly relevant for cardiac tissue engineering applications. In Chapter 2, we describe a novel method for crosslinking PEG microspheres around cells to form a scaffold for tissue engineering. We then demonstrate that HL-1 cardiomyocyte viability and phenotype are retained throughout the fabrication process and during the first 7 weeks of culture. In the third chapter of the

  4. Characterization and cytotoxicity of self-organized assemblies of curcumin and amphiphatic poly(ethylene glycol).

    PubMed

    Sou, Keitaro; Oyajobi, Babatunde; Goins, Beth; Phillips, William T; Tsuchida, Eishun

    2009-04-01

    Polymer-conjugated nanoparticles are an important technology to control the stability, safety, and efficacy in drug delivery systems. Herein, we investigate self-organized mixed assemblies of a lipophilic drug candidate, curcumin (Cm), and a poly(oxyethylene) cholesteryl ether (PEG-Chol). Cm was assembled together with PEG-Chol to form nano-sized assemblies (around 10 nm) of assumed micelles. In contrast with the rapid decomposition of free Cm due to the hydrolysis, the Cm was highly stabilized in the nanoparticles, especially at below 40 mol% Cm. Cell viability assay revealed that the cytotoxic activity of the Cm/PEG-Chol nanoparticles against myeloma cells is higher than those of free Cm in a comparison at 1 microM. On the other hand, both the Cm/PEG-Chol nanoparticles and PEG-Chol micelles had significant cytotoxicity to the myeloma cells at 5 microM. Taken together, the present Cm/PEG-Chol system offers a stable nanoparticle encapsulating Cm which can be injected as a liquid. Cm and vehicle micelles will damage the cancer cells cooperatively. PMID:20055098

  5. Transport properties of carbon dioxide and ammonia in water - ethylene glycol mixtures from molecular dynamics simulations

    NASA Astrophysics Data System (ADS)

    Iskrenova, Eugeniya; Patnaik, Soumya S.

    2015-03-01

    The endothermic decomposition of ammonium carbamate has been proposed as a novel heat sink mechanism for aircraft thermal management (Johnson et al. SAE Technical Paper 2012-01-2190, 2012, doi:10.4271/2012-01-2190]). The products of this decomposition are carbon dioxide and ammonia which need to be efficiently removed in order to better control the decomposition reaction. Molecular dynamics simulations can provide insight into the transport properties of carbon dioxide and ammonia in the carrier fluid. In this work, an extensive set of molecular dynamics simulations was performed to better quantify the concentration dependence of solubility and diffusivity of carbon dioxide and ammonia in water, ethylene glycol, and their mixtures at standard temperature and pressure and at elevated temperature. The simulation results confirm the experimental observations that ammonia is more soluble than carbon dioxide in either water or ethylene glycol and that both carbon dioxide and ammonia are more soluble in ethylene glycol than in water. The simulations of water - ethylene glycol mixtures show that increasing the molar fraction of ethylene glycol leads to increased solubility of carbon dioxide and ammonia in the mixture. The authors gratefully acknowledge the DoD High Performance Computing Centers for computational resources.

  6. Indirect detection of ethylene glycol oligomers using a contactless conductivity detector in capillary liquid chromatography.

    PubMed

    Takeuchi, Toyohide; Sedyohutomo, Anang; Lim, Lee Wah

    2009-07-01

    Ethylene glycol oligomers were visualized by indirect conductimetric detection based on dilution of the mobile phase due to the analytes. A high electrical conductivity background was maintained by the addition of 5 mM sodium nitrate in the mobile phase, and the analytes were visualized by decreases in the background when they eluted. A capacitively coupled contactless conductivity detector was convenient to monitor effluents from the microcolumn with minimum extra-column band broadening. The signals as negative peaks were linear to the concentration of the analytes, and a concentration detection limit of 0.025% was achieved for tetraethylene glycol at S/N=3, corresponding to the mass detection limit of 38 ng for 0.15 microl injection. The logarithm of the retention factor of ethylene glycol oligomers was linear to the degree of polymerization (DP) as well as to the acetonitrile composition in the mobile phase. These situations allowed us to estimate the DP of eluted ethylene glycol oligomers by using a few oligomers with known DP. The dynamic reserve, defined as the ratio of the background to its noise level achieved under the present conditions, was 2.3 x 10(5) which was much larger than that achieved by UV absorption detection. The present method was applied to profile ethylene glycol oligomers contained in commercially available PEG reagents. PMID:19609021

  7. Congenital malformation and maternal occupational exposure to glycol ethers. Occupational Exposure and Congenital Malformations Working Group.

    PubMed

    Cordier, S; Bergeret, A; Goujard, J; Ha, M C; Aymé, S; Bianchi, F; Calzolari, E; De Walle, H E; Knill-Jones, R; Candela, S; Dale, I; Dananché, B; de Vigan, C; Fevotte, J; Kiel, G; Mandereau, L

    1997-07-01

    Glycol ethers are found in a wide range of domestic and industrial products, many of which are used in women's work environments. Motivated by concern about their potential reproductive toxicity, we have evaluated the risk of congenital malformations related to glycol ether exposure during pregnancy as part of a multicenter case-control study, conducted in six regions in Europe. The study comprised 984 cases of major congenital malformations and 1,134 controls matched for place and date of birth. Interviews of the mothers provided information about occupation during pregnancy, sociodemographic variables, and other potential risk factors (medical history, tobacco, alcohol, drugs). A chemist specializing in glycol ethers evaluated exposure during pregnancy, using the job description given by the mother, without knowledge of case or control status. We classified malformations into 22 subgroups. The overall odds ratio (OR) of congenital malformation associated with glycol ether exposure was 1.44 [95% confidence interval (CI) = 1.10-1.90], after adjustment for several potential confounders. The association with exposure to glycol ethers appeared particularly strong in three subgroups: neural tube defects (OR = 1.94; 95% CI = 1.16-3.24), multiple anomalies (OR = 2.00; 95% CI = 1.24-3.23), and cleft lip (OR = 2.03; 95% CI = 1.11-3.73). In this last subgroup, risk, especially of an isolated defect, tended to increase with level of exposure. PMID:9209847

  8. Oligoethylene glycol-substituted aza-BODIPY dyes as red emitting ER-probes.

    PubMed

    Kamkaew, Anyanee; Thavornpradit, Sopida; Puangsamlee, Thamon; Xin, Dongyue; Wanichacheva, Nantanit; Burgess, Kevin

    2015-08-14

    This study features aza-BODIPY (BF2-chelated azadipyrromethene) dyes with two aromatic substituents linked by oligoethylene glycol fragments to increase hydrophilicity of aza-BODIPY for applications in intracellular imaging. To prepare these, two chalcones were attached α,ω onto oligoethylene glycol fragments, then reacted with nitromethane anion. Conjugate addition products from this reaction were then subjected to typical conditions for synthesis of aza-BODIPY dyes (NH4OAc, (n)BuOH, 120 °C); formation of boracycles in this reaction was concomitant with creation of macrocycles containing the oligoethylene glycol fragments. Similar dyes with acyclic oligoelythene glycol substituents in the same position were used to compare the efficiencies of the intra- and inter-molecular aza-BODIPY forming reactions, and the characteristics of the products. All the fluors with oligoethylene glycol fragments, i.e. cyclic or acyclic, localized in the endoplasmic reticulum of a fibroblast cell line (WEHI-13VAR), the human pancreatic cancer cell line (PANC-1, rough ER predominates) and human liver cancer cell line (HepG2, smooth ER prevalent). These fluors are potentially useful for near IR (λmax emis at 730 nm) ER staining probes. PMID:26138325

  9. Advantages of using glycolic acid as a retardant in a brushite forming cement.

    PubMed

    Mariño, Faleh Tamimi; Torres, Jesús; Hamdan, Mohammad; Rodríguez, Carmen Rueda; Cabarcos, Enrique López

    2007-11-01

    In this study we have compared the effect of using acetic, glycolic, and citric acids on the brushite cement setting reaction and the properties of the resultant cement. The cement solid phase was made by mixing beta-tricalcium phosphate (beta-TCP), monocalcium dihydrogen phosphate anhydrate (MCPA), and sodium pyrophosphate, whereas the cement liquid phase consisted of aqueous solutions of carboxy acids at concentrations ranging from 0.5 to 3.5M. Cements were prepared by mixing the solid phase with the liquid phase to form a workable paste. The cement setting time was longer for glycolic and citric acids. The best mechanical properties in dry environments were obtained using glycolic and citric acid liquid phases. In a wet environment at 37 degrees C, the cement set with glycolic acid was the strongest one. Brushite cement diametral tensile strength seems to be affected by the calcium-carboxyl phase produced in the setting reaction. The acceptable setting time and mechanical properties of cements set in glycolic acid solutions are attributed to the additional hydrophilic groups in the carboxylic acid and the low solubility in water of the calcium salt produced in the reaction. Moreover, at high concentrations, carboxylic acids add chemically to the cement matrix becoming reactants themselves. PMID:17465024

  10. Highly conductive polymer electrolyte membranes modified with polyethylene glycol-bis-carbamate

    NASA Astrophysics Data System (ADS)

    Fu, Guopeng; Dempsey, Janel; Kyu, Thein

    By virtue of its non-flammability and chemical stability, polyethylene glycol (PEG) networks have shown potential application in all solid-state polymer electrolyte membranes (PEM). However, room temperature ionic conductivity of these PEG based PEMs is inherently low. Plasticization of these PEMs is needed to improve the ionic conductivity. It was demonstrated by this group that small-molecule plasticizers such as succinonitrile, ethylene carbonate, or urea-carbamate can boost ionic conductivity of solid-state polymer electrolyte membranes. Polyethylene glycol bis-carbamate (PEGBC) was synthesized via condensation reaction of polyethylene glycol diamine and ethylene carbonate. The PEGBC modified PEM has shown higher ionic conductivity relative to the unmodified PEM. Moreover, PEGBC modified PEM has a better thermal stability relative to ethylene carbonate based liquid electrolyte with enhanced ionic conductivity. Supported by NSF-DMR 1161070, 1502543 and REU 1359321.

  11. Complete free energy landscape and statistical thermodynamics of single poly(ethylene glycol) molecules

    NASA Astrophysics Data System (ADS)

    Staple, Douglas; Hanke, Felix; Kreuzer, Hans Jürgen

    2007-03-01

    In this paper, we revisit the statistical mechanics of poly(ethylene glycol) with the intention to check ad hoc approximations made in previous works, namely to keep all C O bonds along the chain in the trans configuration. The theory developed here includes all the bonds on an equal footing. Starting with density functional theory calculations for the ethylene glycol monomer, dimer and trimer one can determine all the energetic and geometric parameters needed for a rotationally isomeric state model with interactions between nearest neighbour monomers included. The properties of short molecules are presented in detail, including the force-extension curves, end-to-end distributions, and also a discussion of the local helix properties. Finally, we use the transfer matrix method for long chains of 200 ethylene glycol monomers, i.e. 600 bonds. The agreement with the experimental force-extension curve is excellent.

  12. Study of core-shell platinum-based catalyst for methanol and ethylene glycol oxidation

    NASA Astrophysics Data System (ADS)

    Kaplan, D.; Alon, M.; Burstein, L.; Rosenberg, Yu.; Peled, E.

    A Ru core-Pt shell, XC72-supported catalyst was synthesized in a two-step process: first, by deposition of Ru on XC72 by the polyol process and then by deposition of Pt on the XC72-supported Ru, with NaBH 4 as reducing agent. The structure and composition of this core-shell catalyst were determined by EDS, XPS, TEM and XRD. Electrochemical characterization was determined with the use of cyclic voltammetry and chronoamperometry. The methanol and ethylene glycol oxidation activities of the core-shell catalyst were studied at 80 °C and compared to those of a commercial catalyst. It was found to be significantly better (in terms of A g -1 of Pt) in the case of methanol oxidation and worse in the case of ethylene glycol oxidation. Possible reasons for the lower ethylene glycol oxidation activity of the core-shell catalyst are discussed.

  13. Determination of thymine glycol residues in irradiated or oxidized DNA by formation of methylglyceric acid

    SciTech Connect

    Schellenberg, K.A.; Shaeffer, J.

    1986-05-01

    Treatment of DNA solutions with X-irradiation various oxidants including hydrogen peroxide plus ferrous ion, hydrogen peroxide plus copper ion and ascorbate, permanganate, or sonication in the presence of dissolved oxygen all produced varying amounts of thymine glycol residues. After denaturing the DNA with heat, the glycol residues were reduced and labeled at the 6 position with tritium- labeled sodium borohydride. Subsequent reaction with anhydrous methanolic HCl gave a quantitative yield of the methyl ester of methylglyceric acid, which was determined by thin layer chromatography. The method, developed using thymidine as a model, was used to ascertain the requirements for glycol formation in DNA. It was shown that hydroxyl radical generating systems, permanganate, X-irradiation, or sonication in presence of oxygen were required, but hydrogen peroxide in the absence of iron or copper and ascorbate was inactive. Application to determination of DNA damage in vivo is being explored.

  14. Thermosensitivity of bile acid-based oligo(ethylene glycol) stars in aqueous solutions.

    PubMed

    Strandman, Satu; Le Dévédec, Frantz; Zhu, X X

    2011-08-01

    Amphiphilic star-shaped oligo(ethylene glycol)s with a hydrophobic bile acid core and varying number of hydrophilic arms have been made. Their thermal behavior in aqueous solutions depends on the number rather than the length of the arms. The two-armed lithocholate derivative showed the strongest tendency for association and exhibited the lowest cloud point (79 °C) of the oligomers made, as well as another phase separation at a lower temperature (31 °C). The "double thermosensitivity" arising both from the salt-dependent LCST of the oligo(ethylene glycol) segments and the temperature-responsive self-assembly of amphiphilic bile acid derivative provides an interesting path in the design of bile acid-based smart materials. PMID:21661073

  15. Reduction of friction stress of ethylene glycol by attached hydrogen ions

    PubMed Central

    Li, Jinjin; Zhang, Chenhui; Deng, Mingming; Luo, Jianbin

    2014-01-01

    In the present work, it is shown that the friction stress of ethylene glycol can decrease by an order of magnitude to achieve superlubricity if there are hydrogen ions attached on the friction surfaces. An ultra-low friction coefficient (μ = 0.004) of ethylene glycol between Si3N4 and SiO2 can be obtained with the effect of hydrogen ions. Experimental result indicates that the hydrogen ions adsorbed on the friction surfaces forming a hydration layer and the ethylene glycol in the contact region forming an elastohydrodynamic film are the two indispensable factors for the reduction of friction stress. The mechanism of superlubricity is attributed to the extremely low shear strength of formation of elastohydrodynamic film on the hydration layer. This finding may introduce a new approach to reduce friction coefficient of liquid by attaching hydrogen ions on friction surfaces. PMID:25428584

  16. Preparation and Thermo-Physical Properties of Fe2O3-Propylene Glycol Nanofluids.

    PubMed

    Shylaja, A; Manikandan, S; Suganthi, K S; Rajan, K S

    2015-02-01

    Iron oxide (Fe2O3) nanoparticles were prepared from ferric chloride and ferrous sulphate by precipitation reaction. Fe2O3-propylene glycol nanofluid was prepared by dispersing Fe2O3 nanoparticles in propylene glycol through stirred bead milling, shear homogenization and probe ultrasonication. The nanofluid was characterized through measurement of viscosity, particle size distribution and thermal conductivity. The interactions between Fe2O3 nanoparticles and propylene glycol on the nanoparticle surfaces lead to reduction in viscosity, the magnitude of which increases with nanoparticle concentration (0-2 vol%) at room temperature. The thermal conductivity enhancement for 2 vol% nanofluid was about 21% at room temperature, with liquid layering being the major contributor for thermal conductivity enhancement. PMID:26353708

  17. Mineral induced phosphorylation of glycolate ion--a metaphor in chemical evolution

    NASA Technical Reports Server (NTRS)

    Kolb, V.; Zhang, S.; Xu, Y.; Arrhenius, G.

    1997-01-01

    Bilateral surface-active minerals with excess positive charge concentrate glycolate and trimetaphosphate ion from l0(-3) m aqueous solution to half-saturation of the internal surface sites, and induce phosphorylation of glycolate ion in the mineral with trimetaphosphate, sorbed from l0(-2) m solution. By utilizing reactants from dilute solution at near-neutral pH, and eliminating the need for participating organic nitrogen compounds, the reaction comprises several elements considered necessary for geochemical realism in models for molecular evolution.

  18. The determination of aluminum, copper, iron, and lead in glycol formulations by atomic absorption spectroscopy

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Initial screening tests and the results obtained in developing procedures to determine Al, Cu, Fe, and Pb in glycol formulations are described. Atomic absorption completion was selected for Cu, Fe and Pb, and after comparison with emission spectroscopy, was selected for Al also. Before completion, carbon, iron, and lead are extracted with diethyl dithio carbamate (DDC) into methyl isobutyl ketone (MIBK). Aluminum was also extracted into MIBK using 8-hydroxyquinoline as a chelating agent. As little as 0.02 mg/l carbon and 0.06 mg/l lead or iron may be determined in glycol formulations. As little as 0.3 mg/l aluminum may be determined.

  19. Synthesis, Characterization, and Size Control of Zinc Sulfide Nanoparticles Capped by Poly(ethylene glycol)

    NASA Astrophysics Data System (ADS)

    Allehyani, S. H. A.; Seoudi, R.; Said, D. A.; Lashin, A. R.; Abouelsayed, A.

    2015-11-01

    Zinc sulfide nanoparticles with controllable size were synthesized by chemical precipitation. Results from transmission electron microscopy and x-ray powder diffraction showed the samples were grown with the cubic phase. Particle size was varied by varying the molar ratio of zinc chloride to sodium sulfide in the presence of poly(ethylene glycol). The optical band gap was calculated on the basis of ultraviolet-visible spectroscopy and ranged from 4.13 to 4.31 eV depending on particle size. Surface passivation and adsorption of poly (ethylene glycol) on the nanoparticles was explained on the basis of Fourier-transform infrared measurements.

  20. Sorption of adamantanes on polyethylene glycol-modified graphitized thermal soot

    NASA Astrophysics Data System (ADS)

    Yashkin, S. N.; Ageeva, Yu. A.

    2014-04-01

    The thermodynamic characteristics of sorption of adamantane and its functional derivatives on graphitized thermal soot (GTS) modified with polyethylene glycol Carbowax 20M were determined by equilibrium gas chromatography. The resulting thermodynamic characteristics were analyzed and compared with the data measured for adamantanes on the surface of nonmodified GTS and polyethylene glycol deposited on an inert substrate. The solid carbon substrate was shown to affect the character of intermolecular interactions in the GTS-modifier system and the retention of framework compounds under the conditions of gas, liquid, and solid-state chromatography.

  1. Ethylene glycol (antifreeze) poisoning in a free-ranging polar bear

    SciTech Connect

    Amstrup, S.C.; Gardner, C.; Myers, K.C.; Oehme, F.W. )

    1989-08-01

    The bright, fluorescent pink-colored remains of a polar bear were found on an Alaskan island with the gravel and snow adjacent to the bear colored bright purple. Traces of fox urine and feces found nearby were also pink. The pink and purple colors were due to rhodamine B, and ethylene glycol (EG) was present in the soil under the carcass. Evidence is given to suggest the bear consumed a mixture of rhodamine B and EG commonly used to mark roads and runways during snow and ice periods. Such wildlife losses could be prevented by substituting propylene glycol for the EG in such mixtures.

  2. Microgels of polyaspartamide and poly(ethylene glycol) derivatives obtained by γ-irradiation

    NASA Astrophysics Data System (ADS)

    Pitarresi, Giovanna; Licciardi, Mariano; Craparo, Emanuela Fabiola; Calderaro, Elio; Spadaro, Giuseppe; Giammona, Gaetano

    2002-09-01

    The copolymer PHG based on α, β-poly( N-2-hydroxyethyl)- DL-aspartamide (PHEA) functionalized with glycidyl methacrylate has been exposed in aqueous solution to a γ-ray source at different irradiation doses (2, 2.5 and 3.5 kGy), alone or in combination with poly(ethylene glycol)dimethacrylate (PEGDMA) or poly(ethylene glycol)diacrylate (PEGDA). The irradiation produces microgel systems that have been characterized by viscosity measurements. Lyophilization of microgels gives rise to samples able to swell instantaneously in water whereas their treatment with acetone produces swellable microparticles that have been characterized.

  3. Gas-phase synthesis of morpholine from diethylene glycol and ammonia

    SciTech Connect

    Kronich, I.G.; Dobrovol'skii, S.V.; Nikolaev, Y.T.; Shikunov, B.I.; Dyumaev, K.M.

    1982-11-01

    The theory and practice of catalysis in the process of amination of compounds which contain two or more hydroxyl groups has generated much interest. Specifically, there is particular interest in the reaction of diethylene glycol and ammonia; the amination process in this case is accompanied by cyclization with formation of morpholine - a very important product which is needed in growing amounts in the production of rubber vulcanization accelerators, optical bleaches and a number of other products. The possibility of producing morpholine from diethylene glycol and ammonia in gas phase in the presence of hydrogenating-dehydrogenating catalysts was demonstrated earlier. This report presents the results of further research in this area.

  4. Human Oocyte Vitrification: The permeability of metaphase II oocytes to water and ethylene glycol and the appliance toward vitrification

    PubMed Central

    Mullen, Steven F.; Li, Mei; Li, Yuan; Chen, Zi-Jiang; Critser, John K.

    2008-01-01

    Objectives To determine the permeability of human metaphase II oocytes to ethylene glycol and water in the presence of ethylene glycol, and to use this information to develop a method to vitrify human oocytes. Design An incomplete randomized block design was used for this study. Setting A University-affiliated assisted reproductive center. Patients Women undergoing assisted reproduction in the Center for Reproductive Medicine at Shandong University. Interventions Oocytes were exposed to 1.0 molar ethylene glycol in a single step, and photographed during subsequent volume excursions. Main outcome measures A 2-parameter model was employed to estimate the permeability to water and EG. Results Water permeability ranged from 0.15 to 1.17 µm/(min·atm), and ethylene glycol permeability ranged from 1.5 to 30 µm/min between 7 °C at 36 °C. The activation energies for water and ethylene glycol permeability were 14.42 Kcal/mol and 21.20 Kcal/mol, respectively. Conclusions Despite the lower permeability of human MII oocytes to ethylene glycol compared to previously published values for propylene glycol and dimethylsulfoxide, methods to add and remove human oocytes with a vitrifiable concentration of ethylene glycol can be designed which prevent excessive osmotic stress and minimize exposure to high concentrations of this compound. PMID:17681308

  5. Platelet responses to dynamic biomaterial surfaces with different poly(ethylene glycol) and polyrotaxane molecular architectures constructed on gold substrates.

    PubMed

    Kakinoki, Sachiro; Yui, Nobuhiko; Yamaoka, Tetsuji

    2013-11-01

    Four different dynamic biomaterial surfaces with different molecular architectures were prepared using two hydrophilic polymers: poly(ethylene glycol) and polyrotaxanes containing α-cyclodextrin. Either one or both terminals of the poly(ethylene glycol) or polyrotaxanes were immobilized onto a gold substrate via Au-S bonds, resulting in poly(ethylene glycol)-graft, polyrotaxanes-graft, poly(ethylene glycol)-loop, and polyrotaxanes-loop structures. Human platelet adhesion was suppressed more effectively on the graft surfaces than on the loop surfaces for both poly(ethylene glycol) and polyrotaxanes due to the high mobility of graft polymer chains with a free terminal. Moreover, the platelets adhered to the polyrotaxane surfaces much less than the poly(ethylene glycol) surfaces, possibly because of the mobile nature of the α-cyclodextrin molecules that were threaded on the poly(ethylene glycol) chain. Actin filament assembly in adherent platelets was also greatly prevented on the poly(ethylene glycol)/polyrotaxanes-graft surfaces in comparison with the corresponding loop surfaces. A clear correlation between the numbers and areas of adherent platelets on these surfaces suggests that platelet adhesion and activation were dominated by the platelet GPIIb/IIIa-adsorbed fibrinogen interaction. These results indicate that both of the different modes of dynamic features, sliding/rotation of α-cyclodextrin and polymer chain mobility, effectively suppressed platelet adhesion in spite of the similar hydrophilicity. This research affords a novel chemical strategy for designing hemocompatible biomaterial surfaces. PMID:23048065

  6. Determination of trace amounts of ethylene glycol and its analogs in water matrixes by liquid chromatography/tandem mass spectrometry.

    PubMed

    Tran, Buu N; Okoniewski, Richard; Bucciferro, Anthony; Jansing, Robert; Aldous, Kenneth M

    2014-01-01

    Contamination of drinking water by ethylene glycol (EG) is a public health concern. EG causes adverse health effects in humans and animals, including cardiopulmonary and acute renal failure. EG and other glycols, such as propylene glycol (PG) are major components in antifreeze liquids, which may be the main source of contamination of ground water. A sensitive LC/electrospray ionization (ESI)-MS/MS method was developed to measure trace amounts of EG, diethylene glycol, and 1,2- and 1,3-PG in several water sources, including municipal tap, lake, river, and salinated water. In this method, glycols in water samples were derivatized with benzoyl chloride by the Schotten-Baumann reaction, followed by liquid-liquid extraction using pentane as the organic solvent prior to the LC/ESI-MS/MS determination. QC included analysis of a method blank and samples fortified at low and high levels. Analytical data showed excellent linear calibration for all observed glycols, with good precision and accuracy. The method detection limits for the studied glycols ranged from 1.9 to 6.1 ng/mL across the water matrixes tested. This method is suitable to help assess water quality in areas that may be prone to glycol contamination. PMID:24672883

  7. Highly efficient conversion of biomass-derived glycolide to ethylene glycol over CuO in water.

    PubMed

    Xu, Lingli; Huo, Zhibao; Fu, Jun; Jin, Fangming

    2014-06-01

    The efficient conversion of biomass-derived glycolide into ethylene glycol over CuO in water was investigated. The reaction of glycolide was carried out with 25 mmol Zn and 6 mmol CuO with 25% water filling at 250 °C for 150 min, which yielded the desired ethylene glycol in 94% yield. PMID:24769741

  8. 40 CFR 721.10472 - 1,3-Benzenedimethanamine, polymers with epichlorohydrin-polyethylene glycol reaction products.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10472 1,3-Benzenedimethanamine, polymers with epichlorohydrin-polyethylene glycol reaction products. (a) Chemical substance and... with epichlorohydrin-polyethylene glycol reaction products. 721.10472 Section 721.10472 Protection...

  9. 40 CFR 721.10472 - 1,3-Benzenedimethanamine, polymers with epichlorohydrin-polyethylene glycol reaction products.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10472 1,3-Benzenedimethanamine, polymers with epichlorohydrin-polyethylene glycol reaction products. (a) Chemical substance and... with epichlorohydrin-polyethylene glycol reaction products. 721.10472 Section 721.10472 Protection...

  10. Synthesis of glycolate from pyruvate via isocitrate lyase by tobacco leaves in light. [Nicotiana tabacum var Havana Seed

    SciTech Connect

    Zelitch, I. )

    1988-02-01

    Tobacco (Nicotiana tabacum var Havana Seed) leaf discs were supplied tracer quantities of (2-{sup 14}C)- and (3-{sup 14}C) pyruvate for 60 minutes in steady state photosynthesis with 21% or 1% O{sub 2}, and the glycolate oxidase inhibitor {alpha}-hydroxy-2-pyridinemethanesulfonic acid was then added for 5 or 10 minutes to cause glycolate to accumulate. The (3-{sup 14}C) pyruvate was converted directly to glycolate as shown by a 50% greater than equal-labeled {sup 14}C in C-2 of glycolate, and the fraction of {sup 14}C in C-2 increased in 1% O{sub 2} to 80% greater than equal-labeled. This suggests the pathway using pyruvate is less O{sub 2}-dependent than the oxygenase reaction producing glycolate from the Calvin cycle. The formation of glycolate from pyruvate in the leaf discs was time-dependent and with (2-{sup 14}C)- and (3-{sup 14}C) pyruvate supplied leaf discs the C-2 of glyoxylate derived from C-2 of isocitrate was labeled asymmetrically in a manner similar to the asymmetrical labeling of C-2 of glycolate under a number of conditions. Thus glycolate was probably formed by the reduction of glyoxylate. Isocitric lyase activity of tobacco leaves was associated with leaf mitochondria, through most of the activity was in the supernatant fraction after differential centrifugation of leaf homogenates.

  11. 40 CFR 721.6980 - Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dimer acids, polymer with polyalkylene... Substances § 721.6980 Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky... reporting. (1) The chemical substance dimer acids, polymer with polyalkylene glycol, bisphenol...

  12. 40 CFR 721.6980 - Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Dimer acids, polymer with polyalkylene... Substances § 721.6980 Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky... reporting. (1) The chemical substance dimer acids, polymer with polyalkylene glycol, bisphenol...

  13. 21 CFR 172.765 - Succistearin (stearoyl propylene glycol hydrogen succinate).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Succistearin (stearoyl propylene glycol hydrogen succinate). 172.765 Section 172.765 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN...

  14. 21 CFR 172.765 - Succistearin (stearoyl propylene glycol hydrogen succinate).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Succistearin (stearoyl propylene glycol hydrogen succinate). 172.765 Section 172.765 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION...

  15. 21 CFR 172.765 - Succistearin (stearoyl propylene glycol hydrogen succinate).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Succistearin (stearoyl propylene glycol hydrogen succinate). 172.765 Section 172.765 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN...

  16. 21 CFR 172.765 - Succistearin (stearoyl propylene glycol hydrogen succinate).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Succistearin (stearoyl propylene glycol hydrogen succinate). 172.765 Section 172.765 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN...

  17. 40 CFR 721.8079 - Isophorone diisocyanate neopentyl glycol adipate polyurethane prepolymer.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... glycol adipate polyurethane prepolymer. 721.8079 Section 721.8079 Protection of Environment ENVIRONMENTAL... adipate polyurethane prepolymer. (a) Chemical substance and significant new uses subject to reporting. (1... polyurethane prepolymer (PMN P-94-1743) is subject to reporting under this section for the significant new...

  18. 76 FR 31471 - Ethylene Glycol; Exemption From the Requirement of a Tolerance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-01

    ... ethylene glycol. In the Federal Register of July 9, 2008 (73 FR 39291) (FRL-8371-2), EPA issued a notice... comment in response to the notice of filing. Also, in the Federal Register of August 4, 2004 (69 FR 47149... Order 12866, entitled Regulatory Planning and Review (58 FR 51735, October 4, 1993). Because this...

  19. 40 CFR 721.10515 - Partially fluorinated alcohol substituted glycols (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Partially fluorinated alcohol... New Uses for Specific Chemical Substances § 721.10515 Partially fluorinated alcohol substituted... substances identified generically as partially fluorinated alcohol substituted glycols (PMN P-10-58,...

  20. 21 CFR 172.820 - Polyethylene glycol (mean molecular weight 200-9,500).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Polyethylene glycol (mean molecular weight 200-9,500). 172.820 Section 172.820 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR...

  1. 21 CFR 172.820 - Polyethylene glycol (mean molecular weight 200-9,500).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Polyethylene glycol (mean molecular weight 200-9,500). 172.820 Section 172.820 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR...

  2. MICROWAVE-ACCELERATED SUZUKI CROSS-COUPLING REACTION IN POLYETHYLENE GLYCOL (PEG)

    EPA Science Inventory

    Polyethylene glycol (PEG) is found to be an inexpensive and nontoxic reaction medium for the microwave-assisted Suzuki cross-coupling of arylboronic acids with aryl halides. This environmentally friendly microwave protocol offers the ease of operation and enables the recyclabilit...

  3. Maximizing adhesion of auxin solutions to stem cuttings using sodium cellulose glycolate

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Auxin solutions prepared with sodium cellulose glycolate (SCG; a thickening agent, also known as sodium carboxymethylcellulose) and applied to stem cuttings using a basal quick-dip extend the duration of exposure of cuttings to the auxin and have previously been shown to increase root number and/or ...

  4. TRAPPING FOR MEXICAN FRUIT FLY (DIPTERA: TEPHRITIDAE) WITH TORULA YEAST AND PROPYLENE GLYCOL

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In south Texas, propylene glycol is added to the liquid bait (an aqueous slurry of torula yeast) in surveillance traps for exotic fruit flies to better preserve captured specimens. In a series of tests in Texas and Mexico, overall captures of Mexican fruit flies were roughly the same in traps with ...

  5. Insights on cryoprotectant toxicity from gene expression profiling of endothelial cells exposed to ethylene glycol.

    PubMed

    Cordeiro, Rui Martins; Stirling, Soren; Fahy, Gregory M; de Magalhães, João Pedro

    2015-12-01

    Cryopreservation consists of preserving living cells or tissues generally at -80 °C or below and has many current applications in cell and tissue banking, and future potential for organ banking. Cryoprotective agents such as ethylene glycol (EG) are required for successful cryopreservation of most living systems, but have toxic side effects whose mechanisms remain largely unknown. In this work, we investigated the mechanisms of toxicity of ethylene glycol in human umbilical vein endothelial cells (HUVECs) as a model of the vascular endothelium in perfused organs. Exposing cells to 60% v/v EG for 2 h at 4 °C resulted in only a slight decrease in subsequent cell growth, suggesting only modest toxicity of EG for this cell type. Gene expression analysis with whole genome microarrays revealed signatures indicative of a generalized stress response at 24 h after EG exposure and a trend toward partial recovery at 72 h. The observed changes involved signalling pathways, glycoproteins, and genes involved in extracellular and transmembrane functions, the latter suggesting potential effects of ethylene glycol on membranes. These results continue to develop a new paradigm for understanding cryoprotectant toxicity and reveal molecular signatures helpful for future experiments in more completely elucidating the toxic effects of ethylene glycol in vascular endothelial cells and other cell types. PMID:26471925

  6. 40 CFR 63.765 - Glycol dehydration unit process vent standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... directly to the atmosphere may be used on the air emission control equipment installed to comply with... satisfaction, that the total HAP emissions to the atmosphere from the glycol dehydration unit process vent are... demonstrates, to the Administrator's satisfaction, that total emissions to the atmosphere from the...

  7. AN EVALUATION OF THE HUMAN CARCINOGENIC POTENTIAL OF ETHYLENE GLYCOL BUTYL ETHER (EGBE)

    EPA Science Inventory

    Background

    The position paper, An Evaluation of the Human Carcinogenic Potential of Ethylene Glycol Butyl Ether, was developed in support of the Agency's evaluation of a petition from the...

  8. 40 CFR 721.8079 - Isophorone diisocyanate neopentyl glycol adipate polyurethane prepolymer.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... glycol adipate polyurethane prepolymer. 721.8079 Section 721.8079 Protection of Environment ENVIRONMENTAL... adipate polyurethane prepolymer. (a) Chemical substance and significant new uses subject to reporting. (1... polyurethane prepolymer (PMN P-94-1743) is subject to reporting under this section for the significant new...

  9. 40 CFR 721.8079 - Isophorone diisocyanate neopentyl glycol adipate polyurethane prepolymer.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... glycol adipate polyurethane prepolymer. 721.8079 Section 721.8079 Protection of Environment ENVIRONMENTAL... adipate polyurethane prepolymer. (a) Chemical substance and significant new uses subject to reporting. (1... polyurethane prepolymer (PMN P-94-1743) is subject to reporting under this section for the significant new...

  10. 40 CFR 721.8079 - Isophorone diisocyanate neopentyl glycol adipate polyurethane prepolymer.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... glycol adipate polyurethane prepolymer. 721.8079 Section 721.8079 Protection of Environment ENVIRONMENTAL... adipate polyurethane prepolymer. (a) Chemical substance and significant new uses subject to reporting. (1... polyurethane prepolymer (PMN P-94-1743) is subject to reporting under this section for the significant new...

  11. 40 CFR 721.8079 - Isophorone diisocyanate neopentyl glycol adipate polyurethane prepolymer.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... glycol adipate polyurethane prepolymer. 721.8079 Section 721.8079 Protection of Environment ENVIRONMENTAL... adipate polyurethane prepolymer. (a) Chemical substance and significant new uses subject to reporting. (1... polyurethane prepolymer (PMN P-94-1743) is subject to reporting under this section for the significant new...

  12. IRIS Toxicological Review of Ethylene Glycol Mono-Butyl Ether (EGBE) (Interagency Science Discussion Draft)

    EPA Science Inventory

    EPA is releasing the draft report, Toxicological Review for Ethylene Glycol Mono-Butyl Ether , that was distributed to Federal agencies and White House Offices for comment during the Science Discussion step of the IRIS Assessme...

  13. SUBACUTE AND SUBCHRONIC TOXICITY OF ETHYLENE GLYCOL ADMINISTERED IN DRINKING WATER TO SPRAGUE-DAWLEY RATS

    EPA Science Inventory

    Subacute (10-day) and subchronic (90-day) toxicity studies of ethylene glycol (EG) were conducted in male and female sprague-Dawley rats to provide the U.S. Environmental Protection Agency's (EPA) Office of Drinking Water with toxicity data for final preparation of a Health Advis...

  14. Ethylene Glycol Adsorption and Reaction over CeOX(111) Thin Films

    SciTech Connect

    Mullins, David R; Chen, Tsung-Liang

    2011-01-01

    This study reports the interaction of ethylene glycol with well-ordered CeO{sub x}(111) thin film surfaces. Ethylene glycol initially adsorbs on fully oxidized CeO{sub 2}(111) and reduced CeO{sub 2-x}(111) through the formation of one C-O-Ce bond and then forms a second alkoxy bond after annealing. On fully oxidized CeO{sub 2}(111) both recombination of ethylene glycol and water desorption occur at low temperature leaving stable -OCH{sub 2}CH{sub 2}O- (ethylenedioxy) intermediates and oxygen vacancies on the surface. This ethylenedioxy intermediate goes through C-C bond scission to produce formate species which then react to produce CO and CO{sub 2}. The formation of water results in the reduction of the ceria. On a reduced CeO{sub 2-x}(111) surface the reaction selectivity shifts toward a dehydration process. The ethylenedioxy intermediate decomposes by breaking a C-O bond and converts into an enolate species. Similar to the reaction of acetaldehyde on reduced CeO{sub 2-x}(111), the enolate reacts to produce acetaldehyde, acetylene, and ethylene. The loss of O from ethylene glycol leads to a small amount of oxidation of the reduced ceria.

  15. COMPARATIVE IMMUNOSUPPRESSION OF VARIOUS GLYCOL ETHERS ORALLY ADMINISTERED TO FISCHER 344 RATS

    EPA Science Inventory

    Oral dosing of adult rats F344 rats with the glycol ether 2-methoxyethanol (ME) or its principal metabolite 2-methoxyacetic acid (MAA) results in the suppression of the primary plaque-forming cell (PFC) response to trinitrophenyl-lipopolysaccharide (TNP_LPS). n the present study,...

  16. Relative toxicities of pure propylene and ethylene glycol and formulated deicers on plant species

    SciTech Connect

    DuFresne, D.L.; Pillard, D.A.

    1994-12-31

    Propylene and ethylene glycol deicers are commonly used at airports in the US and other countries to remove and retard the accumulation of snow and ice on aircraft. Deicers may not only enter water bodies without treatment, due to excessive storm-related flow, but also may expose terrestrial organisms to high concentrations through surface runoff. Most available toxicity data are for aquatic vertebrates and invertebrate species; this study examined effects on terrestrial and aquatic plants. Terrestrial plant species included both a monocot (rye grass, Lolium perenne) and a dicot (lettuce, Lactuca saliva). Aquatic species included a single cell alga (Selenastrum capricomutum), and an aquatic macrophyte (duckweed, Lemna minor). Glycol deicers were obtained in the formulated mixtures used on aircraft. Pure ethylene and propylene glycol were obtained from Sigma{reg_sign}. Parameters measured included germination, root and shoot length, survival, and growth. Formulated deicers, like those used at airports, were generally more toxic than pure chemicals, based on glycol concentration. This greater toxicity of formulated deicers is consistent with results of tests using animal species.

  17. One step synthesis of C-dots by microwave mediated caramelization of poly(ethylene glycol).

    PubMed

    Jaiswal, Amit; Ghosh, Siddhartha Sankar; Chattopadhyay, Arun

    2012-01-11

    A rapid, simple and one step microwave mediated method for synthesizing C-dots using poly(ethylene glycol) (PEG) as a precursor and passivating agent is reported. The C-dots possessed low cytotoxicity, were amenable to separation by electrophoresis, photostable and entered cancer cells, making them suitable candidates for bioimaging and biolabelling. PMID:22075768

  18. The Effect of Ethylene Glycol, Glycine Betaine, and Urea on Lysozyme Thermal Stability

    ERIC Educational Resources Information Center

    Schwinefus, Jeffrey J.; Leslie, Elizabeth J.; Nordstrom, Anna R.

    2010-01-01

    The four-week student project described in this article is an extension of protein thermal denaturation experiments to include effects of added cosolutes ethylene glycol, glycine betaine, and urea on the unfolding of lysozyme. The transition temperatures and van't Hoff enthalpies for unfolding are evaluated for six concentrations of each cosolute,…

  19. 40 CFR 721.10610 - Toluene diisocyanate, polymers with polyalkylene glycol (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Toluene diisocyanate, polymers with... New Uses for Specific Chemical Substances § 721.10610 Toluene diisocyanate, polymers with polyalkylene... substances identified generically as toluene diisocyanate, polymers with polyalkylene glycol (PMNs...

  20. 40 CFR 721.10610 - Toluene diisocyanate, polymers with polyalkylene glycol (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Toluene diisocyanate, polymers with... New Uses for Specific Chemical Substances § 721.10610 Toluene diisocyanate, polymers with polyalkylene... substances identified generically as toluene diisocyanate, polymers with polyalkylene glycol (PMNs...

  1. Spectrophotometric technique quantitatively determines NaMBT inhibitor in ethylene glycol-water solutions

    NASA Technical Reports Server (NTRS)

    Garrard, G. G.

    1967-01-01

    Spectrophotometric method, using a ratio-recording ultraviolet-absorption spectrophotometer, permits analysis of NaMBT in ethylene glycol-water solutions with high accuracy. It reduces analysis time, requires smaller samples, and is able to detect extremely small concentrations of mercaptobenzothiazole.

  2. Construction and use of recombinant Escherichia coli strains for the synthesis of toluene cis-glycol.

    PubMed

    Wahbi, L P; Gokhale, D; Minter, S; Stephens, G M

    1996-09-01

    The toluene dioxygenase genes derived from Pseudomonas putida NCIMB 11767 were subcloned from a previously constructed recombinant plasmid, pIG, using pUC18 as the cloning vector and E. coli TG2 as the host strain. The resulting strain, E. coli TG2 (p1/1), produced toluene cis-glycol when grown in LB broth or minimal medium in the presence of toluene. Restriction mapping and partial DNA sequencing provided evidence for the presence of ORFs with extensive homology to parts of the tod operon from P. putida F1. The clones exhibited some residual toluene cis-glycol dehydrogenase activity which resulted in the formation of small amounts of 3-methylcatechol. Expression of the dioxygenase was induced by toluene, but was not directed by the lac promoter within the cloning vector. The clones were assessed for toluene cis-glycol production in pH-controlled batch cultures, and the maximum product concentration obtained was 1.02 g l-1. Product formation was dependent upon the presence of glucose in the culture medium. Although the substrate was toxic, the biotransformation was apparently limited by the supply of toluene. The results suggest that it should be possible to improve toluene cis-glycol production by recombinants substantially by improving both the strain and fermentation process. PMID:8987488

  3. Amine neutralized alkenylsuccinic anhydride propylene glycol adducts as corrosion inhibitors for hydrocarbon fuels

    SciTech Connect

    Meyer, G.R.

    1989-10-17

    This patent describes a corrosion inhibitor composition for hydrocarbon fuels from the group consisting of gasolines and diesel fuel oils. It comprises: a C{sub 10}-C{sub 24} alkenyl succinic anhydride esterified with between 0.5-1.5 moles of a water-soluble glycol and then neutralized with an aliphatic hydrocarbon amine.

  4. Evaluation of glove material resistance to ethylene glycol dimethyl ether permeation

    SciTech Connect

    Menke, R.; Chelton, C.F.

    1988-08-01

    Some glycol ethers have been reported to cause adverse reproductive effects in exposed male and female workers, and skin absorption has been determined to be an important route of entry of this class of chemicals. Because ethylene glycol dimethyl ether (EGDME) is a possible component of lithium-based primary battery electrolyte systems, a study was undertaken to determine the resistance of various commercially available gloves to permeation of this liquid. The gloves were tested by the ASTM Method F-739-81, and butyl rubber was found to be the most effective barrier to permeation. Further studies determined that the butyl gloves could be reused if they were reconditioned overnight in a vacuum oven at 50 degrees C. When a mixture of ethylene glycol dimethyl ether (30% v/v) and propylene carbonate (70% v/v) was tested, the results indicated that the propylene carbonate retards the permeation of the glycol ether by a factor of 10. This is believed to be caused by the propylene carbonate coating the surface of the butyl membrane to reduce the sorption of EGDME.

  5. 40 CFR 721.10360 - 1-Substituted propane, 3-(triethoxysilyl)-, reaction products with polyethylene glycol mono...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-(triethoxysilyl)-, reaction products with polyethylene glycol mono-(branched tridecyl) ether (generic). 721.10360... CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10360 1-Substituted propane, 3-(triethoxysilyl)-, reaction products with polyethylene...

  6. 40 CFR 721.10360 - 1-Substituted propane, 3-(triethoxysilyl)-, reaction products with polyethylene glycol mono...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-(triethoxysilyl)-, reaction products with polyethylene glycol mono-(branched tridecyl) ether (generic). 721.10360... CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10360 1-Substituted propane, 3-(triethoxysilyl)-, reaction products with polyethylene...

  7. 40 CFR 721.10360 - 1-Substituted propane, 3-(triethoxysilyl)-, reaction products with polyethylene glycol mono...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-(triethoxysilyl)-, reaction products with polyethylene glycol mono-(branched tridecyl) ether (generic). 721.10360... CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10360 1-Substituted propane, 3-(triethoxysilyl)-, reaction products with polyethylene...

  8. Reaction Kinetics of Ethylene Glycol Reforming over Platinum in the Vapor versus Aqueous Phases

    SciTech Connect

    Kandoi, Shampa; Greeley, Jeffrey P.; Simonetti, Dante A.; Shabaker, John; Dumesic, James A.; Mavrikakis, Manos

    2010-08-12

    First-principles, periodic, density functional theory (DFT) calculations are carried out on Pt(111) to investigate the structure and energetics of dehydrogenated ethylene glycol species and transition states for the cleavage of C-H/O-H and C-C bonds. Additionally, reaction kinetics studies are carried out for the vapor phase reforming of ethylene glycol (C2H6O2) over Pt/Al2O3 at various temperatures, pressures, and feed concentrations. These results are compared to data for aqueous phase reforming of ethylene glycol on this Pt catalyst, as reported in a previous publication (Shabaker, J. W.; et al. J. Catal. 2003, 215, 344). Microkinetic models were developed to describe the reaction kinetics data obtained for both the vapor-phase and aqueous-phase reforming processes. The results suggest that C-C bond scission in ethylene glycol occurs at an intermediate value of x (3 or 4) in C2HxO2. It is also found that similar values of kinetic parameters can be used to describe the vapor and aqueous phase reforming data, suggesting that the vapor phase chemistry of this reaction over platinum is similar to that in the aqueous phase over platinum.

  9. Reaction kinetics of ethylene glycol reforming over platinum in the vapor versus aqueous phases

    SciTech Connect

    Kandoi, Shampa; Greeley, Jeff; Simonetti, Dante; Shabaker, John; Dumesic, James A.; Mavrikakis, Manos

    2010-08-12

    First-principles, periodic, density functional theory (DFT) calculations are carried out on Pt(111) to investigate the structure and energetics of dehydrogenated ethylene glycol species and transition states for the cleavage of C–H/O–H and C–C bonds. Additionally, reaction kinetics studies are carried out for the vapor phase reforming of ethylene glycol (C₂H₆O₂) over Pt/Al₂O₃ at various temperatures, pressures, and feed concentrations. These results are compared to data for aqueous phase reforming of ethylene glycol on this Pt catalyst, as reported in a previous publication (Shabaker, J. W.; et al. J. Catal. 2003, 215, 344). Microkinetic models were developed to describe the reaction kinetics data obtained for both the vapor-phase and aqueous-phase reforming processes. The results suggest that C–C bond scission in ethylene glycol occurs at an intermediate value of x (3 or 4) in C₂HxO₂. It is also found that similar values of kinetic parameters can be used to describe the vapor and aqueous phase reforming data, suggesting that the vapor phase chemistry of this reaction over platinum is similar to that in the aqueous phase over platinum.

  10. 40 CFR 63.765 - Glycol dehydration unit process vent standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... directly to the atmosphere may be used on the air emission control equipment installed to comply with... satisfaction, that the total HAP emissions to the atmosphere from the glycol dehydration unit process vent are... demonstrates, to the Administrator's satisfaction, that total emissions to the atmosphere from the...

  11. Ethylene Glycol Adsorption and Reaction over CeOX(111) Thin Films

    SciTech Connect

    T Chen; D Mullins

    2011-12-31

    This study reports the interaction of ethylene glycol with well-ordered CeO{sub x}(111) thin film surfaces. Ethylene glycol initially adsorbs on fully oxidized CeO{sub 2}(111) and reduced CeO{sub 2-x}(111) through the formation of one C-O-Ce bond and then forms a second alkoxy bond after annealing. On fully oxidized CeO{sub 2}(111) both recombination of ethylene glycol and water desorption occur at low temperature leaving stable -OCH{sub 2}CH{sub 2}O- (ethylenedioxy) intermediates and oxygen vacancies on the surface. This ethylenedioxy intermediate goes through C-C bond scission to produce formate species which then react to produce CO and CO{sub 2}. The formation of water results in the reduction of the ceria. On a reduced CeO{sub 2-x}(111) surface the reaction selectivity shifts toward a dehydration process. The ethylenedioxy intermediate decomposes by breaking a C-O bond and converts into an enolate species. Similar to the reaction of acetaldehyde on reduced CeO{sub 2-x}(111), the enolate reacts to produce acetaldehyde, acetylene, and ethylene. The loss of O from ethylene glycol leads to a small amount of oxidation of the reduced ceria.

  12. Film-forming properties of blends of high-oleic sunflower oil with polyalkyl glycol

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The viscosity, density, and elastohydrodynamic film thicknesses of oil-soluble polyalkyl glycols (PAG), high oleic sunflower oil (HOSuO), and their 50/50 (wt.) blends were investigated. The viscosity and density of the blends were found to be predictable from the corresponding neat oil properties us...

  13. 40 CFR 63.62 - Redefinition of glycol ethers listed as hazardous air pollutants.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 10 2014-07-01 2014-07-01 false Redefinition of glycol ethers listed as hazardous air pollutants. 63.62 Section 63.62 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS...

  14. 40 CFR 63.62 - Redefinition of glycol ethers listed as hazardous air pollutants.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 10 2013-07-01 2013-07-01 false Redefinition of glycol ethers listed as hazardous air pollutants. 63.62 Section 63.62 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS...

  15. 40 CFR 63.62 - Redefinition of glycol ethers listed as hazardous air pollutants.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 9 2011-07-01 2011-07-01 false Redefinition of glycol ethers listed as hazardous air pollutants. 63.62 Section 63.62 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR...

  16. 40 CFR 63.62 - Redefinition of glycol ethers listed as hazardous air pollutants.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 10 2012-07-01 2012-07-01 false Redefinition of glycol ethers listed as hazardous air pollutants. 63.62 Section 63.62 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS...

  17. BULK SYNTHESIS OF SILVER NANORODS IN POLY(ETHYLENE GLYCOL) USING MICROWAVE IRRADIATION

    EPA Science Inventory

    Microwave-assisted (MW), surfactantless, greener approach to bulk synthesis of silver nanorods employing poly (ethylene glycol) (PEG) is described. An aqueous solution of silver nitrate (AgNO-3,- 0.1 M, 4 mL) and 4 mL of PEG (molecular weight 300) were mixed at room temperature t...

  18. Molar Mass and Second Virial Coefficient of Polyethylene Glycol by Vapor Pressure Osmometry

    ERIC Educational Resources Information Center

    Schwinefus, Jeffrey J.; Checkal, Caleb; Saksa, Brian; Baka, Nadia; Modi, Kalpit; Rivera, Carlos

    2015-01-01

    In this laboratory experiment, students determine the number-average molar masses and second virial coefficients of polyethylene glycol (PEG) polymers ranging in molar mass from 200 to 1500 g mol[superscript -1] using vapor pressure osmometry (VPO). Students assess VPO in relation to accurate molar mass calculations of PEG polymers. Additionally,…

  19. Detection of ethylene glycol - toward W51/e2 and G34.3+0.02

    NASA Astrophysics Data System (ADS)

    Lykke, Julie M.; Favre, Cécile

    2014-07-01

    Ethylene glycol (HOCH2CH2OH), also commenly known as antifreeze, is the reduced alcohol version of glycolaldehyde (CH2OHCHO). Glycoladehyde - the simplest possible aldehyde sugar (Marstokk and Møllendal 1973) - is the first intermediate step in the path toward forming more complex and biologically relevant molecules through the the formose reaction, which begins with formaldehyde (H2CO) and ends with the formation of sugars and ultimately ribose, the backbone of RNA (e.g., Larralde et al. 1995). The presence of glycolaldehyde is therefore an important indication that processes leading to biologically relevant molecules are taking place. It is however, still unclear as to how glycolaldehyde and ethylene glycol are formed in the ISM. It has been proposed that they share a common formation pathway through UV-irradiation of methanol (CH3OH) ices mixed with CO (Öberg et al. 2009). So far, ethylene glycol, in its lower energy con-former (g’Ga(CH2OH)2), has been detected toward SgrB2 (N) by Hollis et al. (2002), tentatively toward IRAS 16293-2422 (Jørgensen et al. 2012) and marginally by Kalenskii and Johansson (2010) toward W51 e1/e2. Here we present a firm detection of ethylene glycol toward W51/e2 as well as a first detection toward G34.3+0.02 at 1mm and 3mm using the IRAM 30m telescope.

  20. Pervaporation process and use in treating waste stream from glycol dehydrator

    DOEpatents

    Kaschemekat, Jurgen; Baker, Richard W.

    1994-01-01

    Pervaporation processes and apparatus with few moving parts. Ideally, only one pump is used to provide essentially all of the motive power and driving force needed. The process is particularly useful for handling small streams with flow rates less than about 700 gpd. Specifically, the process can be used to treat waste streams from glycol dehydrator regeneration units.