The effects of thermomechanical treatment and surface condition on hydrogen solubility in Types 304L, 21-6-9, and modified A-286 austenitic stainless steels were determined. Three thermomechanical treatments were studied: annealed, 100% cold-worked, and high-energy rate forged (HERFed). Solubility in the modified ...
Energy Citations Database
Hydrogen solubility was directly measured in specimens of Types 304L, 21-6-9, and modified A-286 austenitic stainless steels saturated with hydrogen at 69 MPa pressure at 470 K. Nitrogen in Type 21-6-9 stainless steel and precipitate morphology in the modified Type ...
DOE Information Bridge
The alloy JBK-75, an age-hardenable austenitic stainless steel, is similar to commercial A-286, but has certain chemistry modifications to improve weldability and hydrogen compatibility. The principal changes are an increase in nickel and a decrease in ma...
National Technical Information Service (NTIS)
This report discusses results of a study on selected high strength stainless steel alloy properties that affect resistance welding. The austenitic alloys A-286, JBK-75 (Modified A-286), 21-6-9, 22-13-5, 316 and 304L were investigated and compared. The former two are age ...
The present knowledge on the physical metallurgy of precipitation- hardenable stainless steels is presented. The alloys discussed include the martensitic types (Stainless W and 17-4 PH), the semiaustenitic types (177 PH, PH 15-7 Mo, AM 350, and AM 355), and the austenitic types (A-286 and ...
... Accession Number : AD0181155. Title : Materials Data Handbook--Stainless Steel Alloy A-286. Descriptive Note : SUMMARY REPT. ...
DTIC Science & Technology
... Abstract : Notched C-shaped specimens for 304L, 316, Nitronic 40, A-286, and modified A-286 stainless steels were exposed to tritium at 422 K for ...
ABS>The physical and mechanical properties of commercial precipitation- hardenable stainless steels are presented. The steels covered include the martensitic types (Stainless W and 17/sup -4/ PH), the semiaustenitic types (17-7 PH, PH 15-7 Mo, AM 350, and AM 355), and the austenitic types ...
S>This manual has been prepared to supply data on the more popular methods used for cleaning numerous metals. A glossary of terms, bibliography, and applicable government specifications are included as supplements to the available data. The metals listed are carbon and low alloy steel, ferritic and austenitic stainless steels (AISI 200 and 400 ...
to weld an austenitic stainless steel manifold. It is the conventional prac- tice to weld the austenitic stainless steels with austenitic stainless filler ...
NASA Website
Tensile testing of austenitic steel and superalloy samples irradiated in the HMO 13 assembly was performed in support of the Fast Flux Test Facility (FFTF) Surveillance Program. Postirradiation yield stress, ultimate tensile stress, uniform elongation, total elongation, and reduction in area of 304 stainless steel (SS), 308 SS weld, 316 SS, ...
... Five metallic materials of construction are included in the program: 304 stainless steel; A-286 (aged) steel, 17 4-PH (aged) stainless steel; Inconel ...
... Five metallic materials of construction are included in the program: 304 stainless steel, A-286 (aged) steel, 17-4 (aged) stainless steel, Inconel 718 ...
... bolt materials were: 2024 aluminum, anodized ASTM grade 5 steel, 304 and 316 stainless steels, A286 stainless steel, MP35N multiphase, and ...
... Title : EMBRITTLEMENT OF AUSTENITIC STAINLESS STEELS IRRADIATED WITH ALPHA-PARTICLES. Corporate Author : ...
... OF AUSTENITIC STAINLESS STEELS WITH CONTROLLED RESIDUAL NITROGEN CONTENT; APPLICATION TO NUCLEAR ENERGY,. ...
... Analysis of Austenitic Stainless Steel Welds and Their Modification During Laser Welding,. ... of austenitic stainless steel weld metal containing a ...
... Report Date : DEC 1972. ... cryoformed), 304L, 321 and 347 stainless steel; A-286 super alloy steel; 2219 and 6061 aluminum; OFHC copper; Monel K ...
... was to use stainless steel nuts (Type 303) to replace A286 CRES steel or ... stress-wave rivet system for installation of titanium and A-286 CRES steel ...
... RUPTURE TIME AND A FUNCTION OF THE STRESS FOR SEVERAL ALLOYS INCLUDING 20% CW 316 STAINLESS STEEL, A-286 AND 7075 ...
... Accession Number : ADD309032. Title : THE ULTRASONIC INSPECTION OF AUSTENITIC STAINLESS STEEL WELDS. Corporate Author : ...
... Title : THE RECRYSTALLIZATION BEHAVIOR OF AN AUSTENITIC STAINLESS STEEL INGOT STRUCTURE DUE TO HOT DEFORMATION. ...
... Title : STRESS CORROSION CRACKING OF AUSTENITIC STAINLESS STEELS IN REFINERY ENVIRONMENTS. Corporate Author : ...
... Title : INFLUENCE OF THE AMOUNT OF AUSTENITE ON THE TOUGHNESS OF TWO PHASE STAINLESS STEELS,. Corporate Author : ...
... Title : HIGH TEMPERATURE OXIDATION OF AUSTENITIC STAINLESS STEELS IN REHEATING FURNACE ATMOSPHERE,. Corporate Author : ...
... Title : HIGH TEMPERATURE OXIDATION OF AUSTENITIC STAINLESS STEEL IN LOW OXYGEN PRESSURE,. Corporate Author : ...
... Title : EFFECT OF REM ON THE PLASTICITY OF AUSTENITIC STAINLESS STEELS IN THE HEATED CONDITION,. Corporate Author : ...
... Title : CARBIDE PRECIPITATION AND THE REVERSION OF MARTENSITE TO AUSTENITE IN A SEMI-AUSTENITIC STAINLESS STEEL,. ...
... AUSTENITIC STAINLESS STEEL WELDMENTS BY MEANS OF TRANSMITTER- RECEIVER TYPE LONGITUDINAL-WAVE ANGLE-BEAM PROBE. ...
... Accession Number : ADD151126. Title : The Role of Nitrogen in the Passivity of Austenitic Stainless Steels. Descriptive Note : Journal article,. ...
... Title : Tensile Flow and Fracture Behaviour of Austenitic Stainless Steels After Thermal Aging in a Hydrogen Atmosphere,. ...
... Accession Number : ADD116881. Title : Solidification Behavior of Austenitic Stainless Steel Filler Metals,. Corporate Author : ...
... Title : Sensitization Development in Austenitic Stainless Steel--Measurement and Prediction of Thermomechanical History Effects,. ...
... Title : STRAIN HARDENING OF AUSTENITIC STAINLESS STEEL. Corporate Author : MASSACHUSETTS INST OF TECH CAMBRIDGE. ...
... Accession Number : ADD308507. Title : SOLIDIFICATION BEHAVIOR OF AUSTENITIC STAINLESS STEEL FILLER METALS. Corporate Author : ...
... Accession Number : ADD118021. Title : Recrystallization of Austenitic Stainless Steels After Hot Rolling,. Corporate Author : ...
... Accession Number : ADD128421. Title : Microstructural Modification of Austenitic Stainless Steels by Rapid Solidification,. Corporate Author : ...
... Accession Number : ADD118363. Title : Mechanical Properties Evaluation of Austenitic Stainless Steels Irradiated in EBR-II,. ...
... Accession Number : ADD118037. Title : Internal Friction Due to Hydrogen in Austenitic Stainless Steels,. Corporate Author : ...
... Accession Number : ADD148113. Title : Instabilities in Stabilized Austenitic Stainless Steels. Descriptive Note : Journal article,. ...
... Accession Number : ADD116681. Title : HYDRIDE PHASES IN AUSTENITIC STAINLESS STEELS,. Corporate Author : Personal ...
... Accession Number : ADD117119. Title : Estimation of Delta Ferrite in Austenitic Stainless Steel Weldments by an Electrochemical Technique,. ...
... Title : Effects of Surface Finish on the Corrosion Resistance of Austenitic Stainless Steel for Boilers (Corrosion Resistance of Austenitic Stainless ...
... Title : Diffusion Bonding of Silicon Nitride to Austenitic Stainless Steel without Interlayers. Descriptive Note : Journal article,. ...
... Accession Number : ADD130636. Title : Diffraction Patterns on Radiographs of Austenitic Stainless Steel Welds,. Corporate Author : ...
... The creep behavior at elevated temperature of an austenitic stainless steel (25Cr ... addition on creep rates, and of the influence of grain size on the ...
... Title : Corrosion Resistance of Sensitized Stainless Austenitic Chromium-Nickel Steel Subjected to Atmospheric Corrosion,. ...
... Title : Carbide Precipitation and Brittleness in Austenitic Stainless Steel,. Corporate Author : CASE INST OF TECH CLEVELAND OH. ...
... Title : Behavior of Various Austenitic Stainless Steels to Stress Corrosion Cracking in Boiling Magnesium Chloride Solution,. ...
... Accession Number : ADD112256. Title : AN AUSTENITIC STAINLESS STEEL WITHOUT NICKEL AND CHROMIUM,. Corporate Author : ...
J-integral fracture mechanics techniques and scanning electron microscopy observations were used to investigate the effects of tritium and its decay product, helium-3, on Types 304L, 316L, 21-6-9, A286, and JBK-75 (Modified A286) stainless steels. Tritium...
The effect of autogenous gas-tungsten arc-welding on the mechanical performance of two austenitic steels has been evaluated for cable jackets of force-cooled superconductor coils. The original candidate material was Nitronic 40, a nitrogen-strengthened stainless steel. The in-situ reaction heat treatment at 700/sup 0/C necessary for the formation of the ...
0 VASCOMAX 200 CVN. 0 PH 13-8 MO 8 A-286. 0 AUSTENITIC STEELS (300 SERIES, NITbONIC 40). 0 DUAL PHASE ALLOYS (15-5 PH, AF 1410). CONCERNS a PROSPECTS ...
... 36. - Alliage Az8GU. ... S-816 Cobalt-base alloy 13 M-252 Nickel-base alloy 16-25-6 Heat-resisting austenitic alloy A-286 Heat-resisting steel ...
plate (50" x 60"), however as mentioned in Section 2.1, its use is not recommended. ..... of special hardware which allows for thermal expansion. ...... Nitronic 40 (formerly 21-6-9) (2). A-286 Stainless Steel. AM-350 Stainless Steel ...
... THE RESULTS OF ULTRASONIC VELOCITY MEASUREMENTS SHOW THAT, IN STAINLESS STEEL WELDS, A HIGH DEGREE OF ...
... TEMPERATURE WAS INVESTIGATED FOR TYPE 304 STAINLESS STEEL ... IT IS FOUND THAT THE CREEP RUPTURE TIME IS EXPRESSED AS A ...
Eleven alloys similar to commercial A-286 but with small variations in chemistry were tested to assess whether the performance of this type of stainless steel, which shows a ductility ( RA) loss of about 48 pct when hydrogen charged, could be improved. It was found that removal of Mn resulted in an RA loss of only 15 pct; low Mn plus a ...
NASA Astrophysics Data System (ADS)
Out-of-pile tests were conducted for 1000 h at 600/sup 0/C and 725/sup 0/C to determine the compatibility of helium- and sodium-bonded (U,Pu)C + 9-12 vol percent (U,Pu)/sub 2/C/sub 3/ with austenitic alloys Type 330 stainless steel, A286, M813, PE-16, Inconel 706, and Inconel 718. The compatibility of ferritic ...
... Abstract : The hot cracking susceptibility of several austenitic stainless steel filler metals and a Type 304L stainless steel base metal was evaluated ...
J-integral fracture mechanics techniques and scanning electron microscopy observations were used to investigate the effects of tritium and its decay product, helium-3, on Types 304L, 316L, 21-6-9, A286, and JBK-75 (Modified A286) stainless steels. Tritium-exposed samples of each steel had lower ...
A primary austenitic, non-equilibrium mode of solidification can be induced in many 300 series austenitic stainless steels by laser welding and other rapid solidification techniques. The change in solidification mode can often result in a fully austenitic...
Research progress is reported in programs on microstructural stability of stainless steels. Results of studies are summarized on time-temperature- precipitation in 316 and 321 stainless steels, phase formation in austenitic stainless steels, corrosion behavior of austenitic ...
... Accession Number : ADD142679. Title : Superheater Design Criterion to Avoid Cracking of Austenitic Stainless Steels by Caustic,. ...
... Title : Secondary Austenite-Martensite Transformation during Tempering of Martensitic Stainless Chromium Steel,. Corporate Author : ...
... Accession Number : ADD109893. Title : STRESS CORROSION CRACK GROWTH IN AUSTENITIC STAINLESS STEEL,. Corporate Author : ...
... Accession Number : ADD138399. Title : Role of Nitrogen Interstitials in Plastic Fatigue of Austenitic Stainless Steels. Descriptive ...
... Accession Number : ADD116830. Title : Nickel Requirements for Equivalent Structures in Austenitic Stainless Steels,. Corporate Author : ...
... Title : Improvement of the Strength of a Metastable Austenitic Stainless Steel by Cyclic Deformation-Induced Martensitic Transformation at 103 K. ...
... ADD124759. Title : Hydrogen Embrittlement at the Weldment of Austenitic Stainless Steels in Hydrogen Gas at Low Temperature,. ...
... Accession Number : ADD129262. Title : Hydrogen Effects on Phase Transformations in Austenitic Stainless Steels,. Corporate Author : ...
... Title : Experimental Study on Crack Growth Behavior for Austenitic Stainless Steel in High Temperature Pure Water,. Descriptive ...
... Accession Number : ADD120022. Title : Effects of Oxide Film on Pitting Corrosion in Austenitic Stainless Steels,. Corporate ...
... Accession Number : ADD143518. Title : Effect of Electromagnetic Stirring on GTA Welds in Austenitic Stainless Steel,. Descriptive ...
... Abstract : Mechanical properties of an aged austenitic stainless steel were investigated at ... the effects of phosphorus and boron additions. ...
... Title : A NEW ETCHANT TO REVEAL PRIOR AUSTENITE GRAIN BOUNDARIES IN MARTENSITIC STAINLESS STEELS,. Corporate Author : ...
In this paper, the effects of internal tritium and helium on the tensile properties of two austenitic stainless steels and an iron-based superalloys have been studied. The materials tested were, forged 21 Cr-6Ni-9Mn and 304L (tested in the annealed condition and tow forged conditions), and a modified A-286 alloy. ...
A method for determining the relative phase volume of austenite in an austenite-ferrite mixture is described in detail. Results obtained by applying this method to an austenite-ferrite stainless steel composite material are presented. The method can be ex...
Thermal analysis and interrupted solidification experiments on selected austenitic stainless steel filler metals provided an understanding of the solidification behavior of austenitic stainless steel welds. The sequences of phase separations found were fo...
Delta ferrite is a magnetic form of iron and has a body centered cubic crystal structure. It is often present as a nonequilibrium phase in austenitic stainless steel welds, castings, and wrought materials. The ferrite content of austenitic stainless steel...
Hard facing of materials such as austenitic stainless steel is of increasing importance in the industrial field. The present aim is to study the hard facing of austenitic AISI 304 stainless steel by SF6 Stellite. After series of tests, the best effective ...
Modelling simultaneous precipitation reactions in austenitic stainless steels. T. Sourmail and H. K developed for simultaneous precipitation reactions in austenitic stainless steels, taking into account for important phases in creep-resistant austenitic stainless steels. 1 ...
E-print Network
... Accession Number : ADD135829. Title : Austenitic Iron-Aluminum-Manganese Alloys As Possible Substitutes for Austenitic Stainless Steels,. ...
The effects of specimen size, temperature and irradiation on fracture toughness were studied in unirradiated compact tension specimens of alloy A286 and HT-9 and irradiated specimens of 20 percent cold worked Type 316 stainless steel. Techniques for speci...
The two screws are fabricated from A-286 stainless steel and procured to A.N. specifications. Loss of the screws is precluded in design by adherence to ...
The BSC restraint bracket screws are fabricated from A-286 stainless steel and are procured to MS or NAS specifications. Loss of the BSC primary restraint ...
Oxidation/corrosion resistance comparable to that of N-155 ... the simple upgraded stainless steel, A-286, to the complex cast alloys like .... ferent microstructural form of the eutectic than is found in the lower carbon ... earth metals are added, markedly influencing the behavior of the external ...
The effect of tensile stress on hydrogen diffusion has been determined for Type 303 stainless steel, A286 CRES, and Waspaloy and IN100 nickel-base alloys. It was found that hydrogen diffusion coefficients are not significantly affected by stress, while th...
All threaded fasteners are made from A-286 stainless steel ranging in strength from 180 to 200 KSI. All structural threaded fasteners are tested and ...
... Abstract : The fretting behavior of the nitrogen-bearing austenitic stainless steel, Nitronic 60, has been studied at 20, 400, 500, and 600 C in air. ...
... Title : Structure of Centrifugally Cast Austenitic Stainless Steels: Part 1. HK 40 as Cast and after Creep between 750 and 1000 C,. Corporate Author : ...
... of sensitized austenitic stainless steels, mainly type 304 SS, was investigated in oxygenated high-purity water and borated water below 240 deg.C ...
... Title : Solidification of Austenitic Stainless Steel Weldments: Part 2--The Effect of Alloy Composition on Ferrite Morphology,. Corporate Author : ...
... Title : Improved Ferritic-Austenitic Stainless Steel,. Corporate Author : Personal Author(s) : Richardson ,WH ; Guha,P. Report Date : 1979. ...
... Title : HIGH-SILICON AUSTENITIC STAINLESS STEEL FOR AUTOMOBILE EMISSION CONTROL DEVICES--DEVELOPMENT OF YUS 731,. ...
... Title : Grain Refinement of Austenitic Stainless Steel Weld by Pulsed TIG Welding,. Descriptive Note : Journal Article,. Corporate Author : ...
... Accession Number : ADD149704. Title : Flow Localisation Behaviour of AISI 304L Austenitic Stainless Steel in Warm and Hot Working Regions. ...
This note presents the technical basis for a proposed strain-rate and temperature independent fatigue design curve for austenitic stainless steels.
... Abstract : A process was established in which AOD-refined austenitic stainless steel melts produced from home-made molten ferronickel and ...
... Accession Number : ADD129501. Title : Cellular Precipitation in Austenitic Stainless Steel Containing Aluminium and Titanium,. Corporate Author : ...
This standard establishes the requirements for austenitic stainless steel seamless hexagonal duct tubes for fuel, control rod, and other core component assemblies.
