Sample records for abdelkader hameurlain rosine

  1. 21 CFR 178.3870 - Rosins and rosin derivatives.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Rosins and rosin derivatives. 178.3870 Section 178.3870 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND...

  2. 21 CFR 178.3870 - Rosins and rosin derivatives.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Rosins and rosin derivatives. 178.3870 Section 178.3870 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND...

  3. 21 CFR 178.3870 - Rosins and rosin derivatives.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Rosins and rosin derivatives. 178.3870 Section 178.3870 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND...

  4. 21 CFR 178.3870 - Rosins and rosin derivatives.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Rosins and rosin derivatives. 178.3870 Section 178.3870 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND...

  5. 21 CFR 178.3870 - Rosins and rosin derivatives.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Rosins and rosin derivatives. 178.3870 Section 178.3870 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND SANITIZERS Certain Adjuvants and Production Aids...

  6. The tribology of rosin

    NASA Astrophysics Data System (ADS)

    Smith, J. H.; Woodhouse, J.

    2000-08-01

    Rosin is well known for its ability to excite stick-slip vibration on a violin string but the precise characteristics of the material which enable it to exhibit this behaviour have not been studied in any detail. A method is described in which the coefficient of friction of rosin is measured during individual cycles of a stick-slip vibration. Friction versus sliding velocity characteristics deduced in this way exhibit hysteresis, similar to that found in other investigations using different materials. No part of the hysteresis loops follow the friction/velocity curve found from steady-sliding experiments. Possible constitutive laws are examined to describe this frictional behaviour. It is suggested by a variety of evidence that contact temperature plays an important role. Friction laws are developed by considering that the friction arises primarily from the shear of a softened or molten layer of rosin, with a temperature-dependent viscosity or shear strength. The temperature of the rosin layer is calculated by modelling the heat flow around the sliding contact. The temperature-based models are shown to reproduce some features of the measurements which are not captured in the traditional model, in which friction depends only on sliding speed. A model based on viscous behaviour of a thin melted layer of rosin gives predictions at variance with observations. However, a model based on plastic yielding at the surface of the rosin gives good agreement with these observations.

  7. Electrospun cross linked rosin fibers

    NASA Astrophysics Data System (ADS)

    Baek, Woo-il; Nirmala, R.; Barakat, Nasser A. M.; El-Newehy, Mohamed H.; Al-Deyab, Salem S.; Kim, Hak Yong

    2011-12-01

    In this study, we describe the first reported preparation of rosin in fiber form through use of an electrospinning technique utilizing various solvent systems. The polymer concentration of the formed fiber was studied by using various solvents such as chloroform, ethanol, N-N dimethylformamide (DMF), tetrahydrofuran (THF), acetone, and methylene chloride (MC). An electrospray of the solution resulted in the beaded form of the rosin. By varying the polymer concentration with MC, we were then able to obtain uniform fibers. However, the fibers exhibited large diameter. We believe that it is possible to reduce the diameter of the rosin fibers through appropriate selection of electrospinning parameters. In addition, the morphological transitions from beads, to beaded fiber, to fiber were studied at different polymer concentrations. We propose a possible physical cross linking mechanism for the formation of rosin fibers during the electrospinning process. Our results demonstrate the feasibility of producing fiber nanostructures of rosin by using an electrospinning technique.

  8. "You got to love rosin: Solventless dabs, pure, clean, natural medicine." Exploring Twitter data on emerging trends in Rosin Tech marijuana concentrates.

    PubMed

    Lamy, Francois R; Daniulaityte, Raminta; Zatreh, Mussah; Nahhas, Ramzi W; Sheth, Amit; Martins, Silvia S; Boyer, Edward W; Carlson, Robert G

    2018-02-01

    "Rosin tech" is an emerging solventless method consisting in applying moderate heat and constant pressure on marijuana flowers to prepare marijuana concentrates referred to as "rosin." This paper explores rosin concentrate-related Twitter data to describe tweet content and analyze differences in rosin-related tweeting across states with varying cannabis legal statuses. English language tweets were collected between March 15, 2015 and April 17, 2017, using Twitter API. U.S. geolocated unique (no retweets) tweets were manually coded to evaluate the content of rosin-related tweets. Adjusted proportions of Twitter users and personal communication tweets per state related to rosin concentrates were calculated. A permutation test was used to analyze differences in normalized proportions between U.S. states with different cannabis legal statuses. eDrugTrends collected 8389 tweets mentioning rosin concentrates/technique. 4164 tweets (49.6% of total sample) posted by 1264 unique users had identifiable state-level geolocation. Content analysis of 2010 non-retweeted tweets revealed a high proportion of media-related tweets (44.2%) promoting rosin as a safer and solventless production method. Tweet-volume-adjusted percentages of geolocated Twitter users and personal communication tweets about rosin were respectively up to seven and sixteen times higher between states allowing recreational use of cannabis and states where cannabis is illegal. Our results indicate that there are higher proportions of personal communication tweets and Twitter users tweeting about rosin in U.S. states where cannabis is legalized. Rosin concentrates are advertised as a safer, more natural form of concentrates, but more research on this emerging form of marijuana concentrate is needed. Copyright © 2018 Elsevier B.V. All rights reserved.

  9. 7 CFR 160.12 - Standard designations for rosin.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the act and the provisions in this part shall be designated as “gum rosin,” “wood rosin,” or “tall oil..., followed by any necessary further refinement. (d) The designation “tall oil rosin” shall refer to the kind of rosin remaining after the removal of the fatty acids from tall oil by fractional distillation, and...

  10. 7 CFR 160.12 - Standard designations for rosin.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the act and the provisions in this part shall be designated as “gum rosin,” “wood rosin,” or “tall oil..., followed by any necessary further refinement. (d) The designation “tall oil rosin” shall refer to the kind of rosin remaining after the removal of the fatty acids from tall oil by fractional distillation, and...

  11. Synthesis of Rosin Acid Starch Catalyzed by Lipase

    PubMed Central

    Lin, Rihui; Li, He; Long, Han; Su, Jiating; Huang, Wenqin

    2014-01-01

    Rosin, an abundant raw material from pine trees, was used as a starting material directly for the synthesis of rosin acid starch. The esterification reaction was catalyzed by lipase (Novozym 435) under mild conditions. Based on single factor experimentation, the optimal esterification conditions were obtained as follows: rosin acid/anhydrous glucose unit in the molar ratio 2 : 1, reaction time 4 h at 45°C, and 15% of lipase dosage. The degree of substitution (DS) reaches 0.098. Product from esterification of cassava starch with rosin acid was confirmed by FTIR spectroscopy and iodine coloration analysis. Scanning electron microscopy and X-ray diffraction analysis showed that the morphology and crystallinity of the cassava starch were largely destroyed. Thermogravimetric analysis indicated that thermal stability of rosin acid starch decreased compared with native starch. PMID:24977156

  12. 7 CFR 160.93 - Powdered rosin.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STANDARDS FOR NAVAL STORES Labeling, Advertising and Packing § 160.93 Powdered rosin. The classification and grade of any rosin sold in commerce in a powdered or finely broken condition shall be stated in the... broken. For the purpose of preventing coalescence there may be incorporated in such article a limited and...

  13. 7 CFR 160.93 - Powdered rosin.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... STANDARDS FOR NAVAL STORES Labeling, Advertising and Packing § 160.93 Powdered rosin. The classification and grade of any rosin sold in commerce in a powdered or finely broken condition shall be stated in the... broken. For the purpose of preventing coalescence there may be incorporated in such article a limited and...

  14. 7 CFR 160.93 - Powdered rosin.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STANDARDS FOR NAVAL STORES Labeling, Advertising and Packing § 160.93 Powdered rosin. The classification and grade of any rosin sold in commerce in a powdered or finely broken condition shall be stated in the... broken. For the purpose of preventing coalescence there may be incorporated in such article a limited and...

  15. 7 CFR 160.93 - Powdered rosin.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... STANDARDS FOR NAVAL STORES Labeling, Advertising and Packing § 160.93 Powdered rosin. The classification and grade of any rosin sold in commerce in a powdered or finely broken condition shall be stated in the... broken. For the purpose of preventing coalescence there may be incorporated in such article a limited and...

  16. 7 CFR 160.19 - Samples of rosin for grading.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... for grading. Samples of rosin for grading shall be approximately cubical in shape, and shall be seven... of the following methods: (a) By cutting or cleaving the same from a lump of the rosin removed from... container filled. (e) By withdrawing a quantity of molten rosin from a full drum that has been filled after...

  17. 7 CFR 160.19 - Samples of rosin for grading.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... for grading. Samples of rosin for grading shall be approximately cubical in shape, and shall be seven... of the following methods: (a) By cutting or cleaving the same from a lump of the rosin removed from... container filled. (e) By withdrawing a quantity of molten rosin from a full drum that has been filled after...

  18. 40 CFR 721.9484 - Dimer acid/rosin amidoamine reaction product (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dimer acid/rosin amidoamine reaction... Specific Chemical Substances § 721.9484 Dimer acid/rosin amidoamine reaction product (generic). (a... generically as Dimer acid/rosin amidoamine reaction product (PMN P-99-0143) is subject to reporting under this...

  19. 40 CFR 721.9484 - Dimer acid/rosin amidoamine reaction product (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Dimer acid/rosin amidoamine reaction... Specific Chemical Substances § 721.9484 Dimer acid/rosin amidoamine reaction product (generic). (a... generically as Dimer acid/rosin amidoamine reaction product (PMN P-99-0143) is subject to reporting under this...

  20. 21 CFR 172.735 - Glycerol ester of rosin.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Other Specific Usage Additives § 172.735 Glycerol ester of rosin. Glycerol ester of wood rosin... citrus oils used in the preparation of beverages whereby the amount of the additive does not exceed 100...

  1. 21 CFR 172.735 - Glycerol ester of rosin.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Other Specific Usage Additives § 172.735 Glycerol ester of rosin. Glycerol ester of wood rosin... citrus oils used in the preparation of beverages whereby the amount of the additive does not exceed 100...

  2. 7 CFR 160.24a - Inspection as to condition of drums containing rosin and the quality and condition of the rosin...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... preservation of the quality, of the rosin in the drums. In conjunction with such service, when practicable, the... and the quality and condition of the rosin therein upon request. 160.24a Section 160.24a Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards...

  3. 40 CFR 454.60 - Applicability; description of manufacture of rosin-based derivatives subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... manufacture of rosin-based derivatives subcategory. 454.60 Section 454.60 Protection of Environment... manufacture of rosin-based derivatives subcategory. The provisions of this subpart are applicable to discharges resulting from the manufacture of rosin-based derivatives. ...

  4. 40 CFR 454.60 - Applicability; description of manufacture of rosin-based derivatives subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... manufacture of rosin-based derivatives subcategory. 454.60 Section 454.60 Protection of Environment... MANUFACTURING POINT SOURCE CATEGORY Rosin-Based Derivatives Subcategory § 454.60 Applicability; description of manufacture of rosin-based derivatives subcategory. The provisions of this subpart are applicable to...

  5. 40 CFR 454.20 - Applicability; description of the manufacture of gum rosin and turpentine subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... manufacture of gum rosin and turpentine subcategory. 454.20 Section 454.20 Protection of Environment... the manufacture of gum rosin and turpentine subcategory. The provisions of this subpart are applicable to discharges resulting from the manufacture of gum rosin and turpentine. ...

  6. 40 CFR 454.20 - Applicability; description of the manufacture of gum rosin and turpentine subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... manufacture of gum rosin and turpentine subcategory. 454.20 Section 454.20 Protection of Environment... MANUFACTURING POINT SOURCE CATEGORY Gum Rosin and Turpentine Subcategory § 454.20 Applicability; description of the manufacture of gum rosin and turpentine subcategory. The provisions of this subpart are applicable...

  7. 40 CFR 454.20 - Applicability; description of the manufacture of gum rosin and turpentine subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... manufacture of gum rosin and turpentine subcategory. 454.20 Section 454.20 Protection of Environment... MANUFACTURING POINT SOURCE CATEGORY Gum Rosin and Turpentine Subcategory § 454.20 Applicability; description of the manufacture of gum rosin and turpentine subcategory. The provisions of this subpart are applicable...

  8. 40 CFR 454.20 - Applicability; description of the manufacture of gum rosin and turpentine subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... manufacture of gum rosin and turpentine subcategory. 454.20 Section 454.20 Protection of Environment... MANUFACTURING POINT SOURCE CATEGORY Gum Rosin and Turpentine Subcategory § 454.20 Applicability; description of the manufacture of gum rosin and turpentine subcategory. The provisions of this subpart are applicable...

  9. 40 CFR 454.20 - Applicability; description of the manufacture of gum rosin and turpentine subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... manufacture of gum rosin and turpentine subcategory. 454.20 Section 454.20 Protection of Environment... MANUFACTURING POINT SOURCE CATEGORY Gum Rosin and Turpentine Subcategory § 454.20 Applicability; description of the manufacture of gum rosin and turpentine subcategory. The provisions of this subpart are applicable...

  10. 7 CFR 160.14 - Opaque rosin.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND... resulting when rosin undergoes internal modification indicated by a turbid, clouded, or opaque appearance...

  11. 7 CFR 160.93 - Powdered rosin.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND STANDARDS FOR NAVAL STORES Labeling, Advertising and Packing § 160.93 Powdered rosin. The classification and...

  12. 40 CFR 454.30 - Applicability; description of the manufacture of wood rosin, turpentine and pine oil subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... manufacture of wood rosin, turpentine and pine oil subcategory. 454.30 Section 454.30 Protection of... WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and Pine Oil Subcategory § 454.30 Applicability; description of the manufacture of wood rosin, turpentine and pine oil...

  13. 40 CFR 454.30 - Applicability; description of the manufacture of wood rosin, turpentine and pine oil subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... manufacture of wood rosin, turpentine and pine oil subcategory. 454.30 Section 454.30 Protection of... WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and Pine Oil Subcategory § 454.30 Applicability; description of the manufacture of wood rosin, turpentine and pine oil...

  14. 40 CFR 454.30 - Applicability; description of the manufacture of wood rosin, turpentine and pine oil subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... manufacture of wood rosin, turpentine and pine oil subcategory. 454.30 Section 454.30 Protection of... WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and Pine Oil Subcategory § 454.30 Applicability; description of the manufacture of wood rosin, turpentine and pine oil...

  15. 40 CFR 454.40 - Applicability; description of manufacture of tall oil rosin, pitch and fatty acids subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... manufacture of tall oil rosin, pitch and fatty acids subcategory. 454.40 Section 454.40 Protection of... CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Tall Oil Rosin, Pitch and Fatty Acids Subcategory § 454.40 Applicability; description of manufacture of tall oil rosin, pitch and fatty acids subcategory. The provisions...

  16. 40 CFR 454.40 - Applicability; description of manufacture of tall oil rosin, pitch and fatty acids subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... manufacture of tall oil rosin, pitch and fatty acids subcategory. 454.40 Section 454.40 Protection of... CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Tall Oil Rosin, Pitch and Fatty Acids Subcategory § 454.40 Applicability; description of manufacture of tall oil rosin, pitch and fatty acids subcategory. The provisions...

  17. 7 CFR 160.3 - Rosin defined.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) remains after distillation of the fatty acids from tall oil recovered from wood in the course of its chemical disintegration to produce cellulose. In addition to the free resin acids, rosin may contain relatively small proportions of fatty acids, resin esters and other esters, unsaponifiable resenes, and non...

  18. 7 CFR 160.3 - Rosin defined.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...) remains after distillation of the fatty acids from tall oil recovered from wood in the course of its chemical disintegration to produce cellulose. In addition to the free resin acids, rosin may contain relatively small proportions of fatty acids, resin esters and other esters, unsaponifiable resenes, and non...

  19. 7 CFR 160.88 - Permitted use of words “turpentine” and “rosin.”

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... “turpentine” and “rosin.” The use of the word “turpentine” or the word “rosin” is not prohibited in the name of an article made, prepared, or processed from spirits of turpentine or rosin, or to indicate the...

  20. 7 CFR 160.88 - Permitted use of words “turpentine” and “rosin.”

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... “turpentine” and “rosin.” The use of the word “turpentine” or the word “rosin” is not prohibited in the name of an article made, prepared, or processed from spirits of turpentine or rosin, or to indicate the...

  1. 7 CFR 160.88 - Permitted use of words “turpentine” and “rosin.”

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... “turpentine” and “rosin.” The use of the word “turpentine” or the word “rosin” is not prohibited in the name of an article made, prepared, or processed from spirits of turpentine or rosin, or to indicate the...

  2. 7 CFR 160.88 - Permitted use of words “turpentine” and “rosin.”

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... “turpentine” and “rosin.” The use of the word “turpentine” or the word “rosin” is not prohibited in the name of an article made, prepared, or processed from spirits of turpentine or rosin, or to indicate the...

  3. 49 CFR 176.901 - Stowage of cotton or vegetable fibers with rosin or pitch.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Stowage of cotton or vegetable fibers with rosin... REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Cotton and Vegetable Fibers, Motor Vehicles, and Asbestos § 176.901 Stowage of cotton or vegetable fibers with rosin or pitch. (a) Unless impracticable...

  4. 49 CFR 176.901 - Stowage of cotton or vegetable fibers with rosin or pitch.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Stowage of cotton or vegetable fibers with rosin... REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Cotton and Vegetable Fibers, Motor Vehicles, and Asbestos § 176.901 Stowage of cotton or vegetable fibers with rosin or pitch. (a) Unless impracticable...

  5. 49 CFR 176.901 - Stowage of cotton or vegetable fibers with rosin or pitch.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Stowage of cotton or vegetable fibers with rosin... REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Cotton and Vegetable Fibers, Motor Vehicles, and Asbestos § 176.901 Stowage of cotton or vegetable fibers with rosin or pitch. (a) Unless impracticable...

  6. 49 CFR 176.901 - Stowage of cotton or vegetable fibers with rosin or pitch.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Stowage of cotton or vegetable fibers with rosin... REGULATIONS CARRIAGE BY VESSEL Subpart O-Detailed Requirements for Cotton and Vegetable Fibers, Motor Vehicles, Polymeric Beads, and Plastic Molding Compounds § 176.901 Stowage of cotton or vegetable fibers with rosin or...

  7. 49 CFR 176.901 - Stowage of cotton or vegetable fibers with rosin or pitch.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Stowage of cotton or vegetable fibers with rosin... REGULATIONS CARRIAGE BY VESSEL Subpart O-Detailed Requirements for Cotton and Vegetable Fibers, Motor Vehicles, Polymeric Beads, and Plastic Molding Compounds § 176.901 Stowage of cotton or vegetable fibers with rosin or...

  8. 7 CFR 160.88 - Permitted use of words “turpentine” and “rosin.”

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Permitted use of words âturpentineâ and ârosin.â 160... STORES REGULATIONS AND STANDARDS FOR NAVAL STORES Sales and Shipments § 160.88 Permitted use of words “turpentine” and “rosin.” The use of the word “turpentine” or the word “rosin” is not prohibited in the name...

  9. 40 CFR 454.30 - Applicability; description of the manufacture of wood rosin, turpentine and pine oil subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... manufacture of wood rosin, turpentine and pine oil subcategory. 454.30 Section 454.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and Pine Oil Subcategory § 454.30...

  10. 40 CFR 454.30 - Applicability; description of the manufacture of wood rosin, turpentine and pine oil subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... manufacture of wood rosin, turpentine and pine oil subcategory. 454.30 Section 454.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and Pine Oil Subcategory § 454.30...

  11. 21 CFR 172.735 - Glycerol ester of rosin.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Glycerol ester of rosin. 172.735 Section 172.735 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN...

  12. 7 CFR 160.12 - Standard designations for rosin.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... after the distillation of gum spirits of turpentine from the oleoresin (gum) obtained from living pine... distillation of the volatile oil from the oleoresin within or extracted from pine wood by any suitable process... of rosin remaining after the removal of the fatty acids from tall oil by fractional distillation, and...

  13. 7 CFR 160.12 - Standard designations for rosin.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... after the distillation of gum spirits of turpentine from the oleoresin (gum) obtained from living pine... distillation of the volatile oil from the oleoresin within or extracted from pine wood by any suitable process... of rosin remaining after the removal of the fatty acids from tall oil by fractional distillation, and...

  14. 7 CFR 160.12 - Standard designations for rosin.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... after the distillation of gum spirits of turpentine from the oleoresin (gum) obtained from living pine... distillation of the volatile oil from the oleoresin within or extracted from pine wood by any suitable process... of rosin remaining after the removal of the fatty acids from tall oil by fractional distillation, and...

  15. On the palladium-on-charcoal disproportionation of rosin

    Treesearch

    Zhan-Qian Song; Eugene Zavarin; Duane F. Zinkel

    1985-01-01

    Changes in the composition of gum rosin during disproportionation in the presence of 5% palladium-on-charcoal have been determined by gas chromatography. The principal reaction product was dehydroabietic acid. The exocyclic vinyl group of the pimaric/isopimarictype resin acids was hydrogenated completely. Only a small amount of dihydroabietic acids was formed. Eight...

  16. 7 CFR 160.201 - Fees generally for field inspection and certification of naval stores and drum containers of rosin.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of naval stores and drum containers of rosin. 160.201 Section 160.201 Agriculture Regulations of the... Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND STANDARDS FOR NAVAL STORES... of naval stores and drum containers of rosin. Except as provided in § 160.204, the following fees...

  17. 7 CFR 160.201 - Fees generally for field inspection and certification of naval stores and drum containers of rosin.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... of naval stores and drum containers of rosin. 160.201 Section 160.201 Agriculture Regulations of the... Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND STANDARDS FOR NAVAL STORES... of naval stores and drum containers of rosin. Except as provided in § 160.204, the following fees...

  18. 40 CFR 721.9485 - Dimer acid/polymerized rosin amidoamine reaction product (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... amidoamine reaction product (generic). 721.9485 Section 721.9485 Protection of Environment ENVIRONMENTAL... reaction product (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as Dimer acid/polymerized rosin amidoamine reaction product (PMN...

  19. 40 CFR 721.9485 - Dimer acid/polymerized rosin amidoamine reaction product (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... amidoamine reaction product (generic). 721.9485 Section 721.9485 Protection of Environment ENVIRONMENTAL... reaction product (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as Dimer acid/polymerized rosin amidoamine reaction product (PMN...

  20. Biotechnological approaches to enhance salidroside, rosin and its derivatives production in selected Rhodiola spp. in vitro cultures.

    PubMed

    Grech-Baran, Marta; Sykłowska-Baranek, Katarzyna; Pietrosiuk, Agnieszka

    Rhodiola (Crassulaceae) an arctic-alpine plant, is extensively used in traditional folk medicine in Asian and European countries. A number of investigations have demonstrated that Rhodiola preparations exhibit adaptogenic, neuroprotective, anti-tumour, cardioprotective, and anti-depressant effects. The main compounds responsible for these activities are believed to be salidroside, rosin and its derivatives which became the target of biotechnological investigations. This review summarizes the results of the diverse biotechnological approaches undertaken to enhance the production of salidroside, rosin and its derivatives in callus, cell suspension and organ in vitro cultures of selected Rhodiola species.

  1. 40 CFR 454.60 - Applicability; description of manufacture of rosin-based derivatives subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Applicability; description of manufacture of rosin-based derivatives subcategory. 454.60 Section 454.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS...

  2. 40 CFR 454.60 - Applicability; description of manufacture of rosin-based derivatives subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Applicability; description of manufacture of rosin-based derivatives subcategory. 454.60 Section 454.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS...

  3. 40 CFR 454.60 - Applicability; description of manufacture of rosin-based derivatives subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Applicability; description of manufacture of rosin-based derivatives subcategory. 454.60 Section 454.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS...

  4. PLA/PBAT Bionanocomposites with Antimicrobial Natural Rosin for Green Packaging.

    PubMed

    Moustafa, Hesham; El Kissi, Nadia; Abou-Kandil, Ahmed I; Abdel-Aziz, Mohamed S; Dufresne, Alain

    2017-06-14

    The use of biodegradable polymers is of great importance nowadays in many applications. Some of the most commonly used biopolymers are polylactic acid (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) due to their superior properties and availability. In this manuscript, we use a facile and green modification method of organoclay (OC) by antimicrobial natural rosin which is considered as a toxicity-free reinforcing material, thus keeping the green character of the material. It increases the interlayer spacing between the clay platelets. This was proven by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) and found to impart antimicrobial properties to PLA/PBAT blends. The morphology of the resulting blends was conducted using scanning and transmission electron microscopies (SEM and TEM), and evidence of exfoliation and intercalation was observed. The thermal properties of the blends were studied using differential scanning calorimetry (DSC), and a detailed study of the crystallization of both PLA and PBAT was reported showing cold crystallization behavior of PLA. The final effect on mechanical and antimicrobial properties was also investigated. The obtained results reveal excellent possibility of using expanded OC modified PLA/PBAT polymer blends by adding a green material, antimicrobial natural rosin, for food packaging and biomembranes applications.

  5. 78 FR 57852 - Warrior Rosin Spill Superfund Site, Holt, Tuscaloosa County, Alabama ; Notice of Settlement

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-20

    ... Superfund Site, Holt, Tuscaloosa County, Alabama ; Notice of Settlement AGENCY: Environmental Protection... concerning the Warrior Rosin Spill Superfund Site located in Holt, Tuscaloosa County, Alabama. The settlement.../superfund/programs/enforcement/enforcement.html . U.S. Mail: U.S. Environmental Protection Agency, Superfund...

  6. 40 CFR 721.1675 - Disulfonic acid rosin amine salt of a benzidine derivative (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.1675 Disulfonic acid rosin amine salt of a benzidine derivative (generic name). (a) Chemical substance and significant new uses subject to reporting...

  7. Effect of different grades of gum rosins and hydrogenated resins on the solubility, disintegration, and dimensional alterations of Grossman cement.

    PubMed

    Sousa-Neto, M D; Guimarães, L F; Saquy, P C; Pécora, J D

    1999-07-01

    In the present study, we investigated the effect of the addition of different grades of gum rosins and hydrogenated resins to Grossman cement on dimensional stability, solubility and disintegration. pH and conductivity, which may affect these properties, were also determined. The experiments were performed according to Specification 57 of the American Dental Association for root canal cements using Grossman cements containing three gum rosins (grades X, WW, and WG) and two hydrogenated resins (Staybelite and Staybelite ester 10). The results showed that the solubility, disintegration, and dimensional stability of Grossman cement containing Staybelite and Staybelite ester 10 were inferior to the values considered acceptable by the American Dental Association Specification 57.

  8. 40 CFR 454.40 - Applicability; description of manufacture of tall oil rosin, pitch and fatty acids subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Applicability; description of manufacture of tall oil rosin, pitch and fatty acids subcategory. 454.40 Section 454.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND...

  9. 40 CFR 454.40 - Applicability; description of manufacture of tall oil rosin, pitch and fatty acids subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Applicability; description of manufacture of tall oil rosin, pitch and fatty acids subcategory. 454.40 Section 454.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND...

  10. 40 CFR 454.40 - Applicability; description of manufacture of tall oil rosin, pitch and fatty acids subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Applicability; description of manufacture of tall oil rosin, pitch and fatty acids subcategory. 454.40 Section 454.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND...

  11. Preparation and characterization of the graft copolymer of chitosan with poly[rosin-(2-acryloyloxy)ethyl ester].

    PubMed

    Duan, Wengui; Chen, Chunhong; Jiang, Linbin; Li, Guang Hua

    2008-09-05

    Graft copolymerization of rosin-(2-acryloyloxy)ethyl ester (RAEE) onto chitosan (Cts) was carried out under microwave irradiation using potassium persulfate as an initiator. The structures, morphology, and thermal properties of the Cts graft copolymer (Cts-g-PRAEE) were characterized by means of FT-IR, XRD, SEM, and TG. Also, Cts and Cts-g-PRAEE copolymer were used as carriers of fenoprofen calcium (FC), and their controlled release behavior in artificial intestinal juice were studied. The results show that the rate of release of fenoprofen calcium from the carrier of Cts-g-PRAEE copolymer becomes very slower than that of Cts in artificial intestinal juice. Copyright © 2008. Published by Elsevier Ltd.

  12. Disproportionation of rosin on an industrial Pd/C catalyst: reaction pathway and kinetic model discrimination.

    PubMed

    Souto, Juan Carlos; Yustos, Pedro; Ladero, Miguel; Garcia-Ochoa, Felix

    2011-02-01

    In this work, a phenomenological study of the isomerisation and disproportionation of rosin acids using an industrial 5% Pd on charcoal catalyst from 200 to 240°C is carried out. Medium composition is determined by elemental microanalysis, GC-MS and GC-FID. Dehydrogenated and hydrogenated acid species molar amounts in the final product show that dehydrogenation is the main reaction. Moreover, both hydrogen and non-hydrogen concentration considering kinetic models are fitted to experimental data using a multivariable non-linear technique. Statistical discrimination among the proposed kinetic models lead to the conclusion hydrogen considering models fit much better to experimental results. The final kinetic model involves first-order isomerisation reactions of neoabietic and palustric acids to abietic acid, first-order dehydrogenation and hydrogenation of this latter acid, and hydrogenation of pimaric acids. Hydrogenation reactions are partial first-order regarding the acid and hydrogen. Copyright © 2010 Elsevier Ltd. All rights reserved.

  13. Blends of low molecular weight of poly lactic acid (PLA) with gondorukem (gum rosin)

    NASA Astrophysics Data System (ADS)

    Kaavessina, Mujtahid; Distantina, Sperisa; Chafidz, Achmad; Utama, Aditya; Anggraeni, Venisa Mega Puteri

    2018-02-01

    The utilization of plastic was increasing as well as the increasing its demand in wide range application. Consequently, the number of plastic litter will increase and make more serious environmental problems. This research concerns to minimize waste problems by designing biodegradable plastic. In this research, biodegradable plastic was made of poly lactic acid (PLA) and gondorukem (Gum rosin, Resina colophonium) as the plasticizer. The effect of gondorukem towards PLA properties such as rheology and degradability was investigated. The research divided into two steps: (i) the polycondensation of lactic acid (LA) and (ii) modification of obtained poly lactic acid. In the first step, polycondensation was done in N2 atmosphere (138°C) for 30 hours and added 0.1 %w of SnCl2 as catalyst. Bulk modification was conducted by blending of gondurukem in varied weight (0.5, 1, and 2 g in 10 g of PLA). Furthermore, the modified PLA was analyzed its molecular structure, biodegradability and rheological property. The presence of gondorukem enhanced the biodegradability of poly lactic acid. Gondorukem could act as the plasticizer. It is confirmed that the complex viscosity of PLA melt decreased upon the addition of gondorukem

  14. Rosin-enabled ultraclean and damage-free transfer of graphene for large-area flexible organic light-emitting diodes

    PubMed Central

    Zhang, Zhikun; Du, Jinhong; Zhang, Dingdong; Sun, Hengda; Yin, Lichang; Ma, Laipeng; Chen, Jiangshan; Ma, Dongge; Cheng, Hui-Ming; Ren, Wencai

    2017-01-01

    The large polymer particle residue generated during the transfer process of graphene grown by chemical vapour deposition is a critical issue that limits its use in large-area thin-film devices such as organic light-emitting diodes. The available lighting areas of the graphene-based organic light-emitting diodes reported so far are usually <1 cm2. Here we report a transfer method using rosin as a support layer, whose weak interaction with graphene, good solubility and sufficient strength enable ultraclean and damage-free transfer. The transferred graphene has a low surface roughness with an occasional maximum residue height of about 15 nm and a uniform sheet resistance of 560 Ω per square with about 1% deviation over a large area. Such clean, damage-free graphene has produced the four-inch monolithic flexible graphene-based organic light-emitting diode with a high brightness of about 10,000 cd m−2 that can already satisfy the requirements for lighting sources and displays. PMID:28233778

  15. Synthesis of Environmentally Friendly Highly Dispersed Magnetite Nanoparticles Based on Rosin Cationic Surfactants as Thin Film Coatings of Steel

    PubMed Central

    Atta, Ayman M.; El-Mahdy, Gamal A.; Al-Lohedan, Hamad A.; Al-Hussain, Sami A.

    2014-01-01

    This work presents a new method to prepare monodisperse magnetite nanoparticles capping with new cationic surfactants based on rosin. Core/shell type magnetite nanoparticles were synthesized using bis-N-(3-levopimaric maleic acid adduct-2-hydroxy) propyl-triethyl ammonium chloride (LPMQA) as capping agent. Fourier transform infrared spectroscopy (FTIR) was employed to characterize the nanoparticles chemical structure. Transmittance electron microscopies (TEM) and X-ray powder diffraction (XRD) were used to examine the morphology of the modified magnetite nanoparticles. The magnetite dispersed aqueous acid solution was evaluated as an effective anticorrosion behavior of a hydrophobic surface on steel. The inhibition effect of magnetite nanoparticles on steel corrosion in 1 M HCl solution was investigated using potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). Results obtained from both potentiodynamic polarisation and EIS measurements reveal that the magnetite nanoparticle is an effective inhibitor for the corrosion of steel in 1.0 M HCl solution. Polarization data show that magnetite nanoparticles behave as a mixed type inhibitor. The inhibition efficiencies obtained from potentiodynamic polarization and EIS methods are in good agreement. PMID:24758936

  16. Synthesis of environmentally friendly highly dispersed magnetite nanoparticles based on rosin cationic surfactants as thin film coatings of steel.

    PubMed

    Atta, Ayman M; El-Mahdy, Gamal A; Al-Lohedan, Hamad A; Al-Hussain, Sami A

    2014-04-22

    This work presents a new method to prepare monodisperse magnetite nanoparticles capping with new cationic surfactants based on rosin. Core/shell type magnetite nanoparticles were synthesized using bis-N-(3-levopimaric maleic acid adduct-2-hydroxy) propyl-triethyl ammonium chloride (LPMQA) as capping agent. Fourier transform infrared spectroscopy (FTIR) was employed to characterize the nanoparticles chemical structure. Transmittance electron microscopies (TEM) and X-ray powder diffraction (XRD) were used to examine the morphology of the modified magnetite nanoparticles. The magnetite dispersed aqueous acid solution was evaluated as an effective anticorrosion behavior of a hydrophobic surface on steel. The inhibition effect of magnetite nanoparticles on steel corrosion in 1 M HCl solution was investigated using potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). Results obtained from both potentiodynamic polarisation and EIS measurements reveal that the magnetite nanoparticle is an effective inhibitor for the corrosion of steel in 1.0 M HCl solution. Polarization data show that magnetite nanoparticles behave as a mixed type inhibitor. The inhibition efficiencies obtained from potentiodynamic polarization and EIS methods are in good agreement.

  17. Evaluation of Rosin Gum and Eudragit® RS PO as a Functional Film Coating Material.

    PubMed

    Pomin, Suélen Plaza; de Lima, Isabela Angeli; Pezarini, Rogério Ribeiro; Cavalcanti, Osvaldo Albuquerque

    2017-11-01

    Polymers are essential tools in the research and development of new therapeutic devices. The diversity and flexibility of these materials have generated high expectations in the composition of new materials with extraordinary abilities, especially in the design of new systems for the modified release of pharmaceutically active ingredients. The natural polymer rosin features moisture protection and pH-dependent behavior (i.e., it is sensitive to pH > 7.0), suggesting its possible use in pharmaceutical systems. The synthetic polymer Eudragit® RS PO is a low-permeability material, the disintegration of which depends on the time of residence in the gastrointestinal tract. The present study developed a polymeric material with desirable physicochemical characteristics and synergistic effects that resulted from the inherent properties of the associated polymers. Isolated films were obtained by solvent evaporation and subjected to a water vapor transmission test, scanning electron microscopy, calorimetry, Fourier transform-infrared (FT-IR) spectroscopy, micro-Raman spectroscopy, and mechanical analysis. The new polymeric material was macroscopically continuous and homogeneous, was appropriately flexible, had low water permeability, was vulnerable in alkaline environments, and was thermally stable, maintaining an unchanged structure up to temperatures of ∼400°C. The new material also presented potentially suitable characteristics for application in film coatings for oral solids, suggesting that it is capable of carrying therapeutic substances to distal regions of the gastrointestinal tract. These findings indicate that this new material may be added to the list of functional excipients.

  18. 7 CFR 160.1 - Definitions of general terms.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Standards of the United States for classification and grading of spirits of turpentine and rosin. (l... kind of spirits of turpentine or rosin. (n) Grading. Determination of the grade of turpentine or rosin...

  19. 7 CFR 160.1 - Definitions of general terms.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Standards of the United States for classification and grading of spirits of turpentine and rosin. (l... kind of spirits of turpentine or rosin. (n) Grading. Determination of the grade of turpentine or rosin...

  20. 7 CFR 160.1 - Definitions of general terms.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Standards of the United States for classification and grading of spirits of turpentine and rosin. (l... kind of spirits of turpentine or rosin. (n) Grading. Determination of the grade of turpentine or rosin...

  1. 7 CFR 160.1 - Definitions of general terms.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Standards of the United States for classification and grading of spirits of turpentine and rosin. (l... kind of spirits of turpentine or rosin. (n) Grading. Determination of the grade of turpentine or rosin...

  2. 7 CFR 160.64 - Issuance of loan and sale certificate.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... “L. S. Certificate” in this part) may be issued to cover any rosin for which a Rosin Classification... original container. No inspector shall issue and L. S. Certificate until he has made certain that the rosin had previously been officially inspected and certified. The request for such certificate may be made...

  3. 75 FR 11414 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-10

    ... 01/25/10 04/24/10 CBI (S) Tackifier in the (G) Rosin, polymer rubber / tires with phenols and industry formaldehyde P-10-0191 01/25/10 04/24/10 CBI (S) Tackifier in the (G) Rosin, polymer rubber...) Rosin, polymer rubber / tires with phenols and industry formaldehyde P-10-0193 01/25/10 04/24/10 CBI (S...

  4. Effect of polymer blend types and gamma radiation on the physico-chemical properties of polycarbonate

    NASA Astrophysics Data System (ADS)

    Nouh, S. A.; Magida, M. M.; Al-Shekify, L. S.; Bashter, I. I.

    2016-12-01

    Samples from polycarbonate (PC) were classified into two main groups. The first group was blended with Abietic acid (Rosin) with different compositions, while the second group was blended with ethylene-vinyl acetate (EVA) copolymer with almost the same composition. A comparative study of the effect of both Rosin and EVA concentration on the thermal stability of PC has been investigated using thermogravimetric analysis. The results show that blending with Rosin causes the dominance of degradation. Samples from PC with 20% Rosin blend were irradiated with gamma at the dose of range 20-300 kGy. The resultant effect of gamma radiation on the structural properties of the 20% Rosin/ 80%PC blend has been investigated using Fourier Transform Infrared FTIR spectroscopy. The results indicate that degradation of the polymer blend dominates, thus increases the creation of hot free radicals that leads to the formation of color centers in PC. In addition, the transmission of the 20% Rosin/80%PC samples as well as color changes was studied. The color intensity ΔE was greatly increased with increasing the gamma dose up to 300 kGy, accompanied by a significant increase in the blue color component.

  5. 40 CFR 414.40 - Applicability; description of the thermoplastic resins subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... *Ethylene-Methacrylic Acid Copolymers *Ethylene-Vinyl Acetate Copolymers *Fatty Acid Resins *Fluorocarbon..., Acrylates (Latex) *PVC Copolymers, Ethylene-Vinyl Chloride *Rosin Derivative Resins *Rosin Modified Resins...

  6. 21 CFR 178.3850 - Reinforced wax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... component of articles intended for use in producing, manufacturing, packing, processing, transporting, or... Type II Polyethylene Rosins and rosin derivatives as provided in § 178.3870 Synthetic wax polymer as...

  7. 21 CFR 178.3850 - Reinforced wax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... component of articles intended for use in producing, manufacturing, packing, processing, transporting, or... Type II Polyethylene Rosins and rosin derivatives as provided in § 178.3870 Synthetic wax polymer as...

  8. 40 CFR 454.31 - Specialized definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin... CFR part 401 shall apply to this subpart. (b) The term “product” shall mean products from wood rosin...

  9. 40 CFR 454.31 - Specialized definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin... CFR part 401 shall apply to this subpart. (b) The term “product” shall mean products from wood rosin...

  10. 40 CFR 454.31 - Specialized definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin... CFR part 401 shall apply to this subpart. (b) The term “product” shall mean products from wood rosin...

  11. 40 CFR 454.42 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CATEGORY Tall Oil Rosin, Pitch and Fatty Acids Subcategory § 454.42 Effluent limitations and guidelines... properties, controlled by this paragraph, which may be discharged from the manufacture of tall oil rosin...

  12. 40 CFR 454.31 - Specialized definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AND STANDARDS GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and... shall apply to this subpart. (b) The term “product” shall mean products from wood rosin, turpentine and...

  13. 40 CFR 454.31 - Specialized definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AND STANDARDS GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and... shall apply to this subpart. (b) The term “product” shall mean products from wood rosin, turpentine and...

  14. 40 CFR 454.22 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CATEGORY Gum Rosin and Turpentine Subcategory § 454.22 Effluent limitations and guidelines representing the..., controlled by this paragraph, which may be discharged from the manufacture of gum rosin and turpentine by a...

  15. 40 CFR 454.22 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CATEGORY Gum Rosin and Turpentine Subcategory § 454.22 Effluent limitations and guidelines representing the..., controlled by this paragraph, which may be discharged from the manufacture of gum rosin and turpentine by a...

  16. 40 CFR 454.41 - Specialized definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AND STANDARDS GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Tall Oil Rosin, Pitch and... shall apply to this subpart. (b) The term “product” shall mean tall oil rosin, pitch and fatty acids. ...

  17. Study of the biodegradation and in vivo biocompatibility of novel biomaterials.

    PubMed

    Fulzele, S V; Satturwar, P M; Dorle, A K

    2003-09-01

    The degradation of two rosin-based biomaterials, the glycerol ester of maleic rosin (GMR) and the pentaerythritol ester of maleic rosin (PMR), was examined in vitro in phosphate-buffered saline at pH 7.4 and in vivo in a subcutaneous rat model. Free films of the two biomaterials with mean thickness 0.4+/-0.02 mm were used for the study. The initial biocompatibility was followed by microscopic examination of the inflammatory tissue response to the implanted films. Sample weight loss and molecular weight decline of the free films was used to monitor the degradation quantitatively, while surface morphological changes were analysed for qualitative estimation. Biocompatibility response was followed on post-operative days 7, 14, 21 and 28 and compared with those of poly(DL-lactic-co-glycolic acid) (PLGA) (50:50) films. Both biomaterials showed slow in vitro degradation when compared with the in vivo rate. The mechanism followed was, however, bulk degradation of the films. The penta-esterified form of maleic rosin was observed to degrade more rapidly than glycerol esterified maleic rosin. The acute and subacute inflammatory reactions were characterized by fibrosis at the end of 28 days. The biomaterials showed reasonable tissue tolerance to the extent evaluated. There was a total absence of tissue necrosis or abscess formation for all implanted films. The response, although not identical to that of PLGA, is reasonable, promising new drug delivery applications for rosin biomaterials.

  18. 7 CFR 160.61 - Kinds of certificates issued.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND...) Rosin grade and weight certificate. (e) Loan and sale certificate for United States graded rosin. (f...

  19. 40 CFR Appendix D to Part 122 - NPDES Permit Application Testing Requirements (§ 122.21)

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Coliform Fluoride Nitrate-Nitrite Nitrogen, Total Organic Oil and Grease Phosphorus, Total Radioactivity... dodecylbenzenesulfonate Triethylamine Trimethylamine Uranium Vanadium Vinyl acetate Xylene Xylenol Zirconium [Note 1: The.... Testing and reporting for the pesticide fraction in the Tall Oil Rosin Subcategory (subpart D) and Rosin...

  20. 40 CFR Appendix D to Part 122 - NPDES Permit Application Testing Requirements (§ 122.21)

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Coliform Fluoride Nitrate-Nitrite Nitrogen, Total Organic Oil and Grease Phosphorus, Total Radioactivity... dodecylbenzenesulfonate Triethylamine Trimethylamine Uranium Vanadium Vinyl acetate Xylene Xylenol Zirconium [Note 1: The.... Testing and reporting for the pesticide fraction in the Tall Oil Rosin Subcategory (subpart D) and Rosin...

  1. 40 CFR Appendix D to Part 122 - NPDES Permit Application Testing Requirements (§ 122.21)

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Coliform Fluoride Nitrate-Nitrite Nitrogen, Total Organic Oil and Grease Phosphorus, Total Radioactivity... dodecylbenzenesulfonate Triethylamine Trimethylamine Uranium Vanadium Vinyl acetate Xylene Xylenol Zirconium [Note 1: The.... Testing and reporting for the pesticide fraction in the Tall Oil Rosin Subcategory (subpart D) and Rosin...

  2. 40 CFR Appendix D to Part 122 - NPDES Permit Application Testing Requirements (§ 122.21)

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Coliform Fluoride Nitrate-Nitrite Nitrogen, Total Organic Oil and Grease Phosphorus, Total Radioactivity... dodecylbenzenesulfonate Triethylamine Trimethylamine Uranium Vanadium Vinyl acetate Xylene Xylenol Zirconium [Note 1: The.... Testing and reporting for the pesticide fraction in the Tall Oil Rosin Subcategory (subpart D) and Rosin...

  3. 40 CFR Appendix D to Part 122 - NPDES Permit Application Testing Requirements (§ 122.21)

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Coliform Fluoride Nitrate-Nitrite Nitrogen, Total Organic Oil and Grease Phosphorus, Total Radioactivity... dodecylbenzenesulfonate Triethylamine Trimethylamine Uranium Vanadium Vinyl acetate Xylene Xylenol Zirconium [Note 1: The.... Testing and reporting for the pesticide fraction in the Tall Oil Rosin Subcategory (subpart D) and Rosin...

  4. 40 CFR 454.32 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and Pine Oil Subcategory § 454.32 Effluent limitations and guidelines... properties, controlled by this paragraph, which may be discharged from the manufacture of wood rosin...

  5. 40 CFR 454.32 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and Pine Oil Subcategory § 454.32 Effluent limitations and guidelines... properties, controlled by this paragraph, which may be discharged from the manufacture of wood rosin...

  6. Temperature dependent rapid annealing effect induces amorphous aggregation of human serum albumin.

    PubMed

    Ishtikhar, Mohd; Ali, Mohd Sajid; Atta, Ayman M; Al-Lohedan, Hammad; Badr, Gamal; Khan, Rizwan Hasan

    2016-01-01

    This study represents an analysis of the thermal aggregation of human serum albumin (HSA) induced by novel rosin modified compounds. The aggregation process causes conformational alterations in the secondary and tertiary structures of the proteins. The conversion of globular protein to amorphous aggregates was carried out by spectroscopic, calorimetric and microscopic techniques to investigate the factors that are responsible for the structural, conformational and morphological alteration in the protein. Our outcome results show that the aggregation of HSA was dependent on the hydrophobicity, charge and temperature, because the formation of amorphous aggregates occurs in the presence of a novel cationic rosin compound, quaternary amine of rosin diethylaminoethyl ester (QRMAE), at 40°C and pH 7.4 (but at 25°C on similar pH value, there was no evidence of aggregate formation). In addition, the parent compound of QRMAE, i.e., abietic acid, and other derivatives such as nonionic rosin compounds [(RMPEG-750) and (RMA-MPEG-750)] do not shows the aggregating property. This work provides precise and necessary information that aid in the understanding the effects of rosin derivative compounds on HSA. This study also restrains important information for athletes, health providers, pharmaceutical companies, industries, and soft drink-processing companies. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. 40 CFR 454.32 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and Pine Oil Subcategory § 454.32 Effluent limitations and... manufacture of wood rosin, turpentine and pine oil by a point source subject to the provisions of this...

  8. 40 CFR 454.32 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and Pine Oil Subcategory § 454.32 Effluent limitations and... manufacture of wood rosin, turpentine and pine oil by a point source subject to the provisions of this...

  9. 40 CFR 454.32 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Wood Rosin, Turpentine and Pine Oil Subcategory § 454.32 Effluent limitations and... manufacture of wood rosin, turpentine and pine oil by a point source subject to the provisions of this...

  10. OAPEC: Organization of Arab Petroleum Exporting Countries

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Maachou, A.

    1983-01-01

    The organization of Arab Petroleum Exporting Countries plays an important role in furthering the aims of the New International Economic Order. Here, Abdelkader Maachou outlines its structure and its part in furthering the aims of its member countries. The study focuses on the newly created judicial branch and on the economic activities of this important Arab organization. Its contribution to the general intellectual climate of the area is also discussed.

  11. Sampling and analysis of airborne resin acids and solvent-soluble material derived from heated colophony (rosin) flux: a method to quantify exposure to sensitizing compounds liberated during electronics soldering.

    PubMed

    Smith, P A; Son, P S; Callaghan, P M; Jederberg, W W; Kuhlmann, K; Still, K R

    1996-07-17

    Components of colophony (rosin) resin acids are sensitizers through dermal and pulmonary exposure to heated and unheated material. Significant work in the literature identifies specific resin acids and their oxidation products as sensitizers. Pulmonary exposure to colophony sensitizers has been estimated indirectly through formaldehyde exposure. To assess pulmonary sensitization from airborne resin acids, direct measurement is desired, as the degree to which aldehyde exposure correlates with that of resin acids during colophony heating is undefined. Any analytical method proposed should be applicable to a range of compounds and should also identify specific compounds present in a breathing zone sample. This work adapts OSHA Sampling and Analytical Method 58, which is designed to provide airborne concentration data for coal tar pitch volatile solids by air filtration through a glass fiber filter, solvent extraction of the filter, and gravimetric analysis of the non-volatile extract residue. In addition to data regarding total soluble material captured, a portion of the extract may be subjected to compound-specific analysis. Levels of soluble solids found during personal breathing zone sampling during electronics soldering in a Naval Aviation Depot ranged from below the "reliable quantitation limit" reported in the method to 7.98 mg/m3. Colophony-spiked filters analyzed in accordance with the method (modified) produced a limit of detection for total solvent-soluble colophony solids of 10 micrograms/filter. High performance liquid chromatography was used to identify abietic acid present in a breathing zone sample.

  12. Development of eco-friendly submicron emulsions stabilized by a bio-derived gum.

    PubMed

    Pérez-Mosqueda, Luis María; Ramírez, Pablo; Trujillo-Cayado, Luis Alfonso; Santos, Jenifer; Muñoz, José

    2014-11-01

    Many traditional organic solvents are being gradually replaced by ecofriendly alternatives. D-Limonene is a terpenic (bio)-solvent that fulfils the requirements to be considered a green solvent. D-Limonene sub-micron emulsions suffer from Ostwald ripening destabilization. In this study, we examined the influence of the addition of a natural gum (rosin gum) to D-limonene in order to prevent Ostwald ripening. This contribution deals with the study of emulsions formulated with a mixture of D-limonene and rosin gum as dispersed phase and Pluronic PE9400 as emulsifier. The procedure followed for the development of these formulations was based on the application of product design principles. This led to the optimum ratio rosin gum/D-limonene and subsequently to the optimum surfactant concentration. The combination of different techniques (rheology, laser diffraction and multiple light scattering) was demonstrated to be a powerful tool to assist in the prediction of the emulsions destabilization process. Not only did the addition of rosin gum highly increase the stability of these emulsions by inhibiting the Ostwald ripening, but it also reduced the emulsions droplet size. Thus, we found that stable sub-micron D-limonene-in-water emulsions have been obtained in the range 3-6 wt% Pluronic PE-9400 by means of a single-step rotor/stator homogenizing process. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. West Europe Report

    DTIC Science & Technology

    1987-04-08

    in another religion, as the Scottish Ian Dallas. The life of Abdelkader reads like an adventure novel. First he recorded music for The Beatles , the...publication, such as the Indonesian dictator Suharto. He recently spent a month in Libya writing a work on Qadhdhafi, "a man who will go down in history ...decisive in the history of Spain throughout the past 150 years, has been in part the problem of "the military," that of a group of human beings

  14. Analysis of abietic acid and dehydroabietic acid residues in raw ducks and cooked ducks.

    PubMed

    Zhu, Yongzhi; Zhang, Suzhen; Geng, Zhiming; Wang, Daoying; Liu, Fang; Zhang, Muhan; Bian, Huan; Xu, Weimin

    2014-10-01

    Rosin was once widely used for removal of duck feathers in China and is still being used secretly in some poultry processing enterprises. Abietic acid (AA) and dehydroabietic acid (DHAA) are the major compounds of rosin. In the present study, 90 duck samples were collected for investigation of AA and DHAA residues. Abietic acid and DHAA were simultaneously detected in 13 out 40 raw ducks, 8 out of 26 water-boiled salted ducks, and 7 out of 24 roasted ducks, respectively. In positive samples, averages of AA were significantly higher than those of DHAA in positive samples of the 3 types of ducks (P < 0.05). Averages of AA and DHAA in positive raw ducks were significantly higher than those in positive roasted ducks (P < 0.05). The results indicated that almost one-third of raw ducks were defeathered by means of rosin-containing defeathering agent, and cooking processes could reduce the AA and DHAA residues to some extent, but could not eliminate them completely. ©2014 Poultry Science Association Inc.

  15. 7 CFR 160.61 - Kinds of certificates issued.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... The kind of certificates issued are as follows: (a) Turpentine analysis and classification certificate. (b) Turpentine field classification certificate. (c) Rosin classification and grade certificate. (d...

  16. 7 CFR 160.61 - Kinds of certificates issued.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... The kind of certificates issued are as follows: (a) Turpentine analysis and classification certificate. (b) Turpentine field classification certificate. (c) Rosin classification and grade certificate. (d...

  17. 7 CFR 160.61 - Kinds of certificates issued.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... The kind of certificates issued are as follows: (a) Turpentine analysis and classification certificate. (b) Turpentine field classification certificate. (c) Rosin classification and grade certificate. (d...

  18. 7 CFR 160.61 - Kinds of certificates issued.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... The kind of certificates issued are as follows: (a) Turpentine analysis and classification certificate. (b) Turpentine field classification certificate. (c) Rosin classification and grade certificate. (d...

  19. Lap Shear and Impact Testing of Ochre and Beeswax in Experimental Middle Stone Age Compound Adhesives.

    PubMed

    Kozowyk, P R B; Langejans, G H J; Poulis, J A

    2016-01-01

    The production of compound adhesives using disparate ingredients is seen as some of the best evidence of advanced cognition outside of the use of symbolism. Previous field and laboratory testing of adhesives has shown the complexities involved in creating an effective Middle Stone Age glue using Acacia gum. However, it is currently unclear how efficient different adhesive recipes are, how much specific ingredients influence their performance, and how difficult it may have been for those ingredients to be combined to maximum effect. We conducted a series of laboratory-based lap shear and impact tests, following modern adhesion testing standards, to determine the efficacy of compound adhesives, with particular regard to the ingredient ratios. We tested rosin (colophony) and gum adhesives, containing additives of beeswax and ochre in varying ratios. During both lap shear and impact tests compound rosin adhesives performed better than single component rosin adhesives, and pure acacia gum was the strongest. The large difference in performance between each base adhesive and the significant changes in performance that occur due to relatively small changes in ingredient ratios lend further support to the notion that high levels of skill and knowledge were required to consistently produce the most effective adhesives.

  20. Evaluation of certain food additives. Seventy-first report of the Joint FAO/WHO Expert Committee on Food Additives.

    PubMed

    2010-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives. A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives: branching glycosyltransferase from Rhodothermus obamensis expressed in Bacillus subtilis, cassia gum, cyclamic acid and its salts (dietary exposure assessment), cyclotetraglucose and cyclotetraglucose syrup, ferrous ammonium phosphate, glycerol ester of gum rosin, glycerol ester of tall oil rosin, lycopene from all sources, lycopene extract from tomato, mineral oil (low and medium viscosity) class II and class III, octenyl succinic acid modified gum arabic, sodium hydrogen sulfate and sucrose oligoesters type I and type II. Specifications for the following food additives were revised: diacetyltartaric acid and fatty acid esters of glycerol, ethyl lauroyl arginate, glycerol ester of wood rosin, nisin preparation, nitrous oxide, pectins, starch sodium octenyl succinate, tannic acid, titanium dioxide and triethyl citrate. Annexed to the report are tables summarizing the Committee's recommendations for intakes and toxicological evaluations of the food additives considered.

  1. Lap Shear and Impact Testing of Ochre and Beeswax in Experimental Middle Stone Age Compound Adhesives

    PubMed Central

    2016-01-01

    The production of compound adhesives using disparate ingredients is seen as some of the best evidence of advanced cognition outside of the use of symbolism. Previous field and laboratory testing of adhesives has shown the complexities involved in creating an effective Middle Stone Age glue using Acacia gum. However, it is currently unclear how efficient different adhesive recipes are, how much specific ingredients influence their performance, and how difficult it may have been for those ingredients to be combined to maximum effect. We conducted a series of laboratory-based lap shear and impact tests, following modern adhesion testing standards, to determine the efficacy of compound adhesives, with particular regard to the ingredient ratios. We tested rosin (colophony) and gum adhesives, containing additives of beeswax and ochre in varying ratios. During both lap shear and impact tests compound rosin adhesives performed better than single component rosin adhesives, and pure acacia gum was the strongest. The large difference in performance between each base adhesive and the significant changes in performance that occur due to relatively small changes in ingredient ratios lend further support to the notion that high levels of skill and knowledge were required to consistently produce the most effective adhesives. PMID:26983080

  2. 40 CFR 454.21 - Specialized definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Turpentine Subcategory § 454.21 Specialized definitions. For the purpose of this subpart: (a) Except as... shall apply to this subpart. (b) The term “product” shall mean gum rosin and turpentine. ...

  3. 40 CFR 454.21 - Specialized definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Turpentine Subcategory § 454.21 Specialized definitions. For the purpose of this subpart: (a) Except as... shall apply to this subpart. (b) The term “product” shall mean gum rosin and turpentine. ...

  4. 40 CFR 454.22 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... POINT SOURCE CATEGORY Gum Rosin and Turpentine Subcategory § 454.22 Effluent limitations and guidelines... turpentine by a point source subject to the provisions of this paragraph after application of the best...

  5. 40 CFR 454.22 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... POINT SOURCE CATEGORY Gum Rosin and Turpentine Subcategory § 454.22 Effluent limitations and guidelines... turpentine by a point source subject to the provisions of this paragraph after application of the best...

  6. 40 CFR 454.21 - Specialized definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Turpentine Subcategory § 454.21 Specialized definitions. For the purpose of this subpart: (a) Except as... shall apply to this subpart. (b) The term “product” shall mean gum rosin and turpentine. ...

  7. 40 CFR 454.22 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... POINT SOURCE CATEGORY Gum Rosin and Turpentine Subcategory § 454.22 Effluent limitations and guidelines... turpentine by a point source subject to the provisions of this paragraph after application of the best...

  8. Evaluation of certain food additives and contaminants.

    PubMed

    2013-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and a food contaminant with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for seven food additives (advantame; glucoamylase from Trichoderma reesei expressed in Trichoderma reesei; glycerol ester of gum rosin; glycerol ester of tall oil rosin; glycerol ester of wood rosin; nisin; and octenyl succinic acid modified gum arabic) and an assessment of dietary exposure to cadmium from cocoa and cocoa products. Specifications for the following food additives were revised: annatto extracts (solvent-extracted bixin and solvent-extracted norbixin); Benzoe tonkinensis; food additives containing aluminium and/or silicon; mineral oil (medium viscosity); modified starches; paprika extract; phosphates (analytical methods for the determination of phosphorus and revision of specifications); 3-phytase from Aspergillus niger expressed in Aspergillus niger; potassium aluminium silicate; and potassium aluminium silicate-based pearlescent pigments. Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of the food additives and contaminant considered.

  9. 40 CFR 454.42 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CATEGORY Tall Oil Rosin, Pitch and Fatty Acids Subcategory § 454.42 Effluent limitations and guidelines..., pitch and fatty acids by a point source subject to the provisions of this paragraph after application of...

  10. 40 CFR 454.41 - Specialized definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Fatty Acids Subcategory § 454.41 Specialized definitions. For the purpose of this subpart: (a) Except as... shall apply to this subpart. (b) The term “product” shall mean tall oil rosin, pitch and fatty acids. ...

  11. Acid soldering flux poisoning

    MedlinePlus

    Acid soldering flux is a chemical used to clean and protect the area where two pieces of metal are ... The harmful substances in soldering fluxes are called hydrocarbons. They include: Ammonium chloride Rosin Hydrochloric acid Zinc chloride

  12. Evaluation of certain food additives and contaminants.

    PubMed

    2011-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The Committee also evaluated the risk posed by two food contaminants, with the aim of deriving tolerable intakes where appropriate and advising on risk management options for the purpose of public health protection. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives and contaminants. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for certain food additives (aluminium-containing food additives, Benzoe Tonkinensis, glycerol ester of gum rosin, glycerol ester of tall oil rosin, glycerol ester of wood rosin, octenyl succinic acid modified gum arabic, polydimethyl siloxane, Ponceau 4R, pullulan, pullulanase from Bacillus deromificans expressed in Bacillus licheniformis, Quinoline Yellow and Sunset Yellow FCF) and two food contaminants (cyanogenic glycosides and fumonisins). Specifications for the following food additives were revised: aluminium lakes of colouring matters; beta-apo-8'-carotenal; beta-apo-8'-carotenoic acid ethyl ester; beta-carotene, synthetic; hydroxypropyl methyl cellulose; magnesium silicate, synthetic; modified starches; nitrous oxide; sodium carboxymethyl cellulose; and sucrose monoesters of lauric, palmitic or stearic acid. Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of the food additives and contaminants considered.

  13. 21 CFR 172.210 - Coatings on fresh citrus fruit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... CONSUMPTION Coatings, Films and Related Substances § 172.210 Coatings on fresh citrus fruit. Coatings may be... a 2:1 ratio. Sodium lauryl sulfate Complying with § 172.822. As a film former. Wood rosin Color of K...

  14. Genetics Home Reference: Bosma arhinia microphthalmia syndrome

    MedlinePlus

    ... Xue S, Yigit G, Filali H, Chen K, Rosin N, Yoshiura KI, Oufadem M, Beck TJ, McGowan R, ... AD, Nürnberg P, Meschede D, Mühlbauer W, Okamoto N, Varghese V, Irving R, Sigaudy S, Williams D, Ahmed ...

  15. Non-Petroleum Oils

    EPA Pesticide Factsheets

    These include synthetics such as silicone fluids and tung oils, wood-derivative oils such as resin/rosin, animal fats/oil, and seed oils. Many have similar physical properties to petroleum-based, such as water insolubility and formation of slicks.

  16. 40 CFR 454.61 - Specialized definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Specialized definitions. 454.61 Section 454.61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Rosin-Based...

  17. 40 CFR 454.61 - Specialized definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Specialized definitions. 454.61 Section 454.61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Rosin-Based Derivatives...

  18. 40 CFR 454.61 - Specialized definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Specialized definitions. 454.61 Section 454.61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Rosin-Based...

  19. 40 CFR 454.61 - Specialized definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Specialized definitions. 454.61 Section 454.61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Rosin-Based...

  20. 40 CFR 454.61 - Specialized definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Specialized definitions. 454.61 Section 454.61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Rosin-Based Derivatives...

  1. An Industrial Steam Distillation

    ERIC Educational Resources Information Center

    Potter, Frederick S.; Schuerch, Conrad

    1975-01-01

    Describes an undergraduate chemistry experiment which demonstrates the use of codistillation for the separation of substances of low volatility from nonvolatiles. Pine gum is separated into turpentine and rosin by means of codistillation with steam at temperatures above 100 degrees centigrade. (MLH)

  2. 40 CFR 454.41 - Specialized definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Specialized definitions. 454.41 Section 454.41 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Tall Oil Rosin...

  3. 40 CFR 454.41 - Specialized definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Specialized definitions. 454.41 Section 454.41 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Tall Oil Rosin...

  4. 40 CFR 454.41 - Specialized definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Specialized definitions. 454.41 Section 454.41 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Tall Oil Rosin...

  5. 21 CFR 82.1051 - Lakes (D&C).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., gloss white, clay, titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or... radical sodium, potassium, aluminum, barium, calcium, strontium, or zirconium; or (ii) a salt prepared... subpart, by combining such color with the basic radical sodium, potassium, aluminum, barium, calcium...

  6. 21 CFR 82.1051 - Lakes (D&C).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., gloss white, clay, titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or... radical sodium, potassium, aluminum, barium, calcium, strontium, or zirconium; or (ii) a salt prepared... subpart, by combining such color with the basic radical sodium, potassium, aluminum, barium, calcium...

  7. 21 CFR 82.1051 - Lakes (D&C).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., gloss white, clay, titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or... radical sodium, potassium, aluminum, barium, calcium, strontium, or zirconium; or (ii) a salt prepared... subpart, by combining such color with the basic radical sodium, potassium, aluminum, barium, calcium...

  8. 21 CFR 82.1051 - Lakes (D&C).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., gloss white, clay, titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or... radical sodium, potassium, aluminum, barium, calcium, strontium, or zirconium; or (ii) a salt prepared... subpart, by combining such color with the basic radical sodium, potassium, aluminum, barium, calcium...

  9. 21 CFR 82.1051 - Lakes (D&C).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., gloss white, clay, titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or... radical sodium, potassium, aluminum, barium, calcium, strontium, or zirconium; or (ii) a salt prepared... subpart, by combining such color with the basic radical sodium, potassium, aluminum, barium, calcium...

  10. Production of Oleoresin from southern pine trees.

    Treesearch

    T.A. Harrington

    1969-01-01

    Developments in techniques, methods, and equipment for producing oleoresin from the living pine are discussed. Particular emphasis is given to the need for mechanized production methods if this ancient industry is to survive the competition from other sources of rosin and turpentine.

  11. 7 CFR 160.35 - Illegible inspection marks.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND... the proper grade or identity of the rosin. No fee will be charged for this service, but the cost of...

  12. 7 CFR 160.4 - Reclaimed rosin.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... contaminating component remaining from the waste material itself or from any article used in the recovery process is not sufficient to cause the physical or chemical properties of the reclaimed product to differ...

  13. Rosin-Rammler Distributions in ANSYS Fluent

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dunham, Ryan Q.

    In Health Physics monitoring, particles need to be collected and tracked. One method is to predict the motion of potential health hazards with computer models. Particles released from various sources within a glove box can become a respirable health hazard if released into the area surrounding a glove box. The goal of modeling the aerosols in a glove box is to reduce the hazards associated with a leak in the glove box system. ANSYS Fluent provides a number of tools for modeling this type of environment. Particles can be released using injections into the flow path with turbulent properties. Themore » models of particle tracks can then be used to predict paths and concentrations of particles within the flow. An attempt to understand and predict the handling of data by Fluent was made, and results iteratively tracked. Trends in data were studied to comprehend the final results. The purpose of the study was to allow a better understanding of the operation of Fluent for aerosol modeling for future application in many fields.« less

  14. 21 CFR 82.2051 - Lakes (Ext. D&C).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or on any combination of... is a salt in which is combined the basic radical sodium, potassium, barium, or calcium; or (ii) a... color with the basic radical sodium, potassium, aluminum, barium, calcium, strontium, or zirconium. (2...

  15. 21 CFR 82.2051 - Lakes (Ext. D&C).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or on any combination of... is a salt in which is combined the basic radical sodium, potassium, barium, or calcium; or (ii) a... color with the basic radical sodium, potassium, aluminum, barium, calcium, strontium, or zirconium. (2...

  16. 21 CFR 82.2051 - Lakes (Ext. D&C).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or on any combination of... is a salt in which is combined the basic radical sodium, potassium, barium, or calcium; or (ii) a... color with the basic radical sodium, potassium, aluminum, barium, calcium, strontium, or zirconium. (2...

  17. 21 CFR 82.2051 - Lakes (Ext. D&C).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or on any combination of... is a salt in which is combined the basic radical sodium, potassium, barium, or calcium; or (ii) a... color with the basic radical sodium, potassium, aluminum, barium, calcium, strontium, or zirconium. (2...

  18. 21 CFR 82.2051 - Lakes (Ext. D&C).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or on any combination of... is a salt in which is combined the basic radical sodium, potassium, barium, or calcium; or (ii) a... color with the basic radical sodium, potassium, aluminum, barium, calcium, strontium, or zirconium. (2...

  19. Acid composition and use thereof in treating fluid-bearing geologic formations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kucera, C.H.

    1972-04-04

    A composition useful as a fluid-loss control additive consists of a mixture of the following ingredients in the amount of between 7% and 30% by wt of each, to make a total of 100%: (1) an aqueous dispersion for binding clay selected from the class consisting of resins, rubber, rosin acids, and natural gums; (2) a thickening agent selected from the class consisting of fatty acids having from 10 to 24 carbon atoms, rosin acids, and metal soaps thereof; (3) an anionic or nonionic surfactant; and (4) a colloid-forming material which is either clay or asbestos cement. Another optional ingredientmore » is a low- viscosity oil, which is added in amount of up to 75% by wt of the sum of ingredients (1) to (4). The present composition prevents or greatly retards the excessive loss of fluids through the connecting pores of a geologic formation. (7 claims)« less

  20. Reynolds number scaling to predict droplet size distribution in dispersed and undispersed subsurface oil releases.

    PubMed

    Li, Pu; Weng, Linlu; Niu, Haibo; Robinson, Brian; King, Thomas; Conmy, Robyn; Lee, Kenneth; Liu, Lei

    2016-12-15

    This study was aimed at testing the applicability of modified Weber number scaling with Alaska North Slope (ANS) crude oil, and developing a Reynolds number scaling approach for oil droplet size prediction for high viscosity oils. Dispersant to oil ratio and empirical coefficients were also quantified. Finally, a two-step Rosin-Rammler scheme was introduced for the determination of droplet size distribution. This new approach appeared more advantageous in avoiding the inconsistency in interfacial tension measurements, and consequently delivered concise droplet size prediction. Calculated and observed data correlated well based on Reynolds number scaling. The relation indicated that chemical dispersant played an important role in reducing the droplet size of ANS under different seasonal conditions. The proposed Reynolds number scaling and two-step Rosin-Rammler approaches provide a concise, reliable way to predict droplet size distribution, supporting decision making in chemical dispersant application during an offshore oil spill. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. 29 CFR 780.116 - Commodities included by reference to the Agricultural Marketing Act.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... commodity’ includes, in addition to other agricultural commodities, crude gum (oleoresin) from a living tree... spirits of turpentine made from gum (oleoresin) from a living tree” and “ ‘gum rosin’ means rosin...) of the Agricultural Marketing Act is that derived from a living tree, the production of oleoresin...

  2. Service-Learning and Philanthropy: Implications for Course Design

    ERIC Educational Resources Information Center

    Hatcher, Julie A.; Studer, Morgan L.

    2015-01-01

    Developing good citizens is an historic role for higher education (Sullivan & Rosin, 2008) and the emergence of service-learning as a pedagogical strategy has heightened attention to the intentional educational objectives to be addressed in higher education. This article examines the role of service-learning in developing philanthropic values…

  3. 26 CFR 31.3121(b)(1)-1 - Certain services performed by foreign agricultural workers, or performed before 1959 in...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... seeds, and the packing, canning, freezing, drying, or other processing of perishable or seasonable... gum (oleoresin) from a living tree or the processing of such crude gum into gum spirits of turpentine and gum rosin, provided the processing is carried on by the original producer of the crude gum, are...

  4. 26 CFR 31.3121(b)(1)-1 - Certain services performed by foreign agricultural workers, or performed before 1959 in...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... seeds, and the packing, canning, freezing, drying, or other processing of perishable or seasonable... gum (oleoresin) from a living tree or the processing of such crude gum into gum spirits of turpentine and gum rosin, provided the processing is carried on by the original producer of the crude gum, are...

  5. 26 CFR 31.3121(b)(1)-1 - Certain services performed by foreign agricultural workers, or performed before 1959 in...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... seeds, and the packing, canning, freezing, drying, or other processing of perishable or seasonable... gum (oleoresin) from a living tree or the processing of such crude gum into gum spirits of turpentine and gum rosin, provided the processing is carried on by the original producer of the crude gum, are...

  6. 26 CFR 31.3121(b)(1)-1 - Certain services performed by foreign agricultural workers, or performed before 1959 in...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... seeds, and the packing, canning, freezing, drying, or other processing of perishable or seasonable... gum (oleoresin) from a living tree or the processing of such crude gum into gum spirits of turpentine and gum rosin, provided the processing is carried on by the original producer of the crude gum, are...

  7. 26 CFR 31.3121(b)(1)-1 - Certain services performed by foreign agricultural workers, or performed before 1959 in...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... seeds, and the packing, canning, freezing, drying, or other processing of perishable or seasonable... gum (oleoresin) from a living tree or the processing of such crude gum into gum spirits of turpentine and gum rosin, provided the processing is carried on by the original producer of the crude gum, are...

  8. 29 CFR 780.116 - Commodities included by reference to the Agricultural Marketing Act.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... commodity’ includes, in addition to other agricultural commodities, crude gum (oleoresin) from a living tree... spirits of turpentine made from gum (oleoresin) from a living tree” and “ ‘gum rosin’ means rosin... therefore within the definition of “agriculture.” (b) Since the only oleoresin included within section 15(g...

  9. 29 CFR 780.116 - Commodities included by reference to the Agricultural Marketing Act.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... commodity’ includes, in addition to other agricultural commodities, crude gum (oleoresin) from a living tree... spirits of turpentine made from gum (oleoresin) from a living tree” and “ ‘gum rosin’ means rosin... therefore within the definition of “agriculture.” (b) Since the only oleoresin included within section 15(g...

  10. 29 CFR 780.116 - Commodities included by reference to the Agricultural Marketing Act.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... commodity’ includes, in addition to other agricultural commodities, crude gum (oleoresin) from a living tree... spirits of turpentine made from gum (oleoresin) from a living tree” and “ ‘gum rosin’ means rosin... therefore within the definition of “agriculture.” (b) Since the only oleoresin included within section 15(g...

  11. 29 CFR 780.116 - Commodities included by reference to the Agricultural Marketing Act.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... commodity’ includes, in addition to other agricultural commodities, crude gum (oleoresin) from a living tree... spirits of turpentine made from gum (oleoresin) from a living tree” and “ ‘gum rosin’ means rosin... therefore within the definition of “agriculture.” (b) Since the only oleoresin included within section 15(g...

  12. 7 CFR 160.75 - Loan of standards under security deposit.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Loan of standards under security deposit. 160.75... REGULATIONS AND STANDARDS FOR NAVAL STORES Loan and Care of United States Standards § 160.75 Loan of standards under security deposit. Duplicates of the United States Standards for rosin may be loaned to interested...

  13. 27 CFR 21.127 - Shellac (refined).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Gutzeit Method (AOAC method 25.020; for incorporation by reference, see § 21.6(c)). (b) Color. White or orange. (c) Rosin content. None when tested by the following method: Add 20 ml of absolute alcohol or... petroleum ether and mix thoroughly. Add approximately 2 liters of water and separate a portion of the ether...

  14. Pretinning Nickel-Plated Wire Shields

    NASA Technical Reports Server (NTRS)

    Igawa, J. A.

    1985-01-01

    Nickel-plated copper shielding for wires pretinned for subsequent soldering with help of activated rosin flux. Shield cut at point 0.25 to 0.375 in. (6 to 10 mm) from cut end of outer jacket. Loosened end of shield straightened and pulled toward cut end. Insulation of inner wires kept intact during pretinning.

  15. Sustainable Triblock Copolymers for Application as Thermoplastic Elastomers

    NASA Astrophysics Data System (ADS)

    Ding, Wenyue; Wang, Shu; Ganewatta, Mitra; Tang, Chuanbing; Robertson, Megan

    Thermoplastic elastomers (TPEs), combining the processing advantages of thermoplastics with the flexibility and extensibility of elastomeric materials, have found versatile applications in industry, including electronics, clothing, adhesives, and automotive components. ABA triblock copolymers, in which A represents glassy endblocks and B the rubbery midblock, are commercially available as TPEs, such as poly(styrene-b-butadiene-b-styrene) (SBS) or poly(styrene-b-isoprene-b-styrene) (SIS). However, the commercial TPEs are derived from fossil fuels. The finite availability of fossil fuels and the environmental impact of the petroleum manufacturing have led to the increased interest in the development of alternative polymeric materials from sustainable sources. Rosin acids are promising replacement for the petroleum source due to their abundance in conifers, rigid molecular structures, and ease of functionalization. In this study, we explored the utilization of a rosin acid derivative, poly(dehydroabietic ethyl methacrylate) (PDAEMA), as a sustainable alternative for the glassy domain. The triblock copolymer poly(dehydroabietic ethyl methacrylate-b-n-butyl acylate-b-dehydroabietic ethyl methacrylate) (DnBD) was synthesized and characterized. DnBD exhibited tunable morphological and thermal properties. Tensile testing revealed elastomeric behavior.

  16. Fire Safety Aspects of Polymeric Materials. Volume 10. Mines and Bunkers

    DTIC Science & Technology

    1980-01-01

    Formaldehyde and Melamine / Formaldehyde Resins The basic chemistry, properties, and applications of urea / formaldehyde and melamine / formaldehyde resins ... Formaldehyde and Melamine Formaldehyde Rosins 71 4.2.3.3 Unsaturated Polyester Resins 71 4.2.3.4 Epoxy Resins 72 4.2.3.5 Furan Resins 72 4.2.3.6 Amine...aldehyde — most frequently formaldehyde . Urea is often used as a modifying agent. The

  17. Redefining Information Warfare Boundaries for an Army in a Wireless World

    DTIC Science & Technology

    2013-01-01

    development. For example, such a generic requirement might involve detection, identification, tracking, and kill - ing a class of targets by nonkinetic...Merging Information Operations and Psychological Operations,” Military Review, January–February 2008, pp. 108–111. Rosin, Randolph, “To Kill a... Mockingbird : The Deconstruction of Information Operations,” Small Wars Journal, August 17, 2009. As of December 6, 2010: http://smallwarsjournal.com/blog

  18. Magnetogenesis and magnetothermal equilibria in turbulent galaxy-cluster plasmas

    NASA Astrophysics Data System (ADS)

    Schekochihin, Alexander

    2011-04-01

    We do not know the exact mechanism of magnetic field generation in magnetised weakly collisional (or collisionless) turbulent plasma. We do know that large-scale MHD motions in such plasmas are subject to fast small-scale kinetic instabilities (mirror and firehose) triggered (at high beta) by pressure anisotropies and that these anisotropies will always arise in a turbulent plasma. Therefore, standard MHD equations cannot be used to describe the turbulent dynamo. I will argue that the likely scenario in such plasmas is explosively fast growth of magnetic fluctuations to dynamical levels. I will further argue that if an efficient turbulent dynamo is assumed, radiative cooling in such plasmas can be balanced in a thermally stable way by turbulent heating, whose rate is set by the condition that plasma locally remains in a marginal state with respect to the mirror and firehose instabilities. This thermal stability suggests that a cooling catastrophe is not inevitable, although whether this old problem is thus resolved depends on whether a number of assumptions about the nonlinear behaviour of the instabilities, strength of turbulence and efficiency of the dynamo are borne out by first- principles microphysical theory, simulations or plasma experiments.References:A. A. Schekochihin, M. Brueggen, L. Feretti, M. W. Kunz, and L. Rudnick, Space Sci. Rev., in preparation (2011)M. W. Kunz, A. A. Schekochihin, S. C. Cowley, J. J. Binney, and J. S. Sanders, Mon. Not. R. Astron. Soc., in press (2011) [e-print arXiv:1003.2719]M. S. Rosin, A. A. Schekochihin, F. Rincon, and S. C. Cowley, Mon. Not. R. Astron. Soc., in press (2011) [e-print arXiv:1002.4017]A. A. Schekochihin, S. C. Cowley, F. Rincon, and M. S. Rosin, Mon. Not. R. Astron. Soc. 405, 291 (2010) [e-print arXiv:0912.1359]A. A. Schekochihin, S. C. Cowley, R. M. Kulsrud, M. S. Rosin, and T. Heinemann, Phys. Rev. Lett. 100, 081301 (2008) [e-print arXiv:0709.3828]A. A. Schekochihin and S. C. Cowley, Phys. Plasmas 13, 056501

  19. 7 CFR 160.19 - Samples of rosin for grading.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the solid mass in the barrel or drum, the top side of which lump shall come from not less than 4... drum through an opening in the side, the center of which opening is approximately 9 inches from the top...

  20. 7 CFR 160.19 - Samples of rosin for grading.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... the solid mass in the barrel or drum, the top side of which lump shall come from not less than 4... drum through an opening in the side, the center of which opening is approximately 9 inches from the top...

  1. 7 CFR 160.19 - Samples of rosin for grading.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... the solid mass in the barrel or drum, the top side of which lump shall come from not less than 4... drum through an opening in the side, the center of which opening is approximately 9 inches from the top...

  2. Study on characteristics of printed circuit board liberation and its crushed products.

    PubMed

    Quan, Cui; Li, Aimin; Gao, Ningbo

    2012-11-01

    Recycling printed circuit board waste (PCBW) waste is a hot issue of environmental protection and resource recycling. Mechanical and thermo-chemical methods are two traditional recycling processes for PCBW. In the present research, a two-step crushing process combined with a coarse-crushing step and a fine-pulverizing step was adopted, and then the crushed products were classified into seven different fractions with a standard sieve. The liberation situation and particle shape in different size fractions were observed. Properties of different size fractions, such as heating value, thermogravimetric, proximate, ultimate and chemical analysis were determined. The Rosin-Rammler model was applied to analyze the particle size distribution of crushed material. The results indicated that complete liberation of metals from the PCBW was achieved at a size less than 0.59 mm, but the nonmetal particle in the smaller-than-0.15 mm fraction is liable to aggregate. Copper was the most prominent metal in PCBW and mainly enriched in the 0.42-0.25 mm particle size. The Rosin-Rammler equation adequately fit particle size distribution data of crushed PCBW with a correlation coefficient of 0.9810. The results of heating value and proximate analysis revealed that the PCBW had a low heating value and high ash content. The combustion and pyrolysis process of PCBW was different and there was an obvious oxidation peak of Cu in combustion runs.

  3. Factors Influencing Hemispheric Specialization.

    DTIC Science & Technology

    1982-05-01

    eyposuro -’va’ irsufficient to allow enoug7h depth of 2ros-in- t o occur ( Craik ^ Lockhart , 1972). The pres-nt *xrirrent .%Il to . the Fardyck et al... levels of processing theory offer another way of explaining these results. 14hen the stimulus is unfamiliar, contains no meanin7ful material, and is...et al. (1978) nor the levels of processing theory (1,"oscovitch et al., 1976) can explain the results obtained for the familiar type of stimulus

  4. Conversion from solvent rinsable fluxes to aqueous rinsable fluxes for hot oil solder leveling

    NASA Astrophysics Data System (ADS)

    1992-03-01

    A water rinsable flux was evaluated for hot oil solder leveling of printed wiring boards. The previously used rosin-activated flux required a solvent containing a chlorinated hydrocarbon for removing the flux residues after soldering. The water rinsable flux requires hot water or a solution of hot detergent for removing flux residues after smoldering. The water rinsable flux produced an acceptable soldered surface. Flux residues were removed by either hot water (120 F) or a solution of hot detergent (120 F).

  5. Control of Macromolecular Architectures for Renewable Polymers: Case Studies

    NASA Astrophysics Data System (ADS)

    Tang, Chuanbing

    The development of sustainable polymers from nature biomass is growing, but facing fierce competition from existing petrochemical-based counterparts. Controlling macromolecular architectures to maximize the properties of renewable polymers is a desirable approach to gain advantages. Given the complexity of biomass, there needs special consideration other than traditional design. In the presentation, I will talk about a few case studies on how macromolecular architectures could tune the properties of sustainable bioplastics and elastomers from renewable biomass such as resin acids (natural rosin) and plant oils.

  6. DIMENSION STABILIZED FIXED PHOTOGRAPHIC TYPE EMULSION AND A METHOD FOR PRODUCING SAME

    DOEpatents

    Gilbert, F.C.

    1962-03-13

    A process is given for stabilizing the dimensions of fixed gelatin-base photographic type emulsions containing silver halide, and particularly to such emulsions containing large amounts of silver chloride for use as nuclear track emulsions, so that the dimensions of the final product are the same as or in a predetermined fixed ratio to the dimensions of the emulsions prior to exposure. The process comprises contacting an exposed, fixed emulsion with a solution of wood rosin dissolved in ethyl alcohol for times corresponding to the dimensions desired, and thereafter permitting the alcohol to evaporate. (AEC)

  7. Modification of oil palm wood using acetylation and impregnation process

    NASA Astrophysics Data System (ADS)

    Subagiyo, Lambang; Rosamah, Enih; Hesim

    2017-03-01

    The purpose of this study is chemical modification by process of acetylation and impregnation of oil palm wood to improve the dimensional stability. Acetylation process aimed at substituting the hydroxyl groups in a timber with an acetyl group. By increasing the acetyl groups in wood is expected to reduce the ability of wood to absorb water vapor which lead to the dimensions of the wood becomes more stable. Studies conducted on oil palm wood (Elaeis guineensis Jacq) by acetylation and impregnation method. The results showed that acetylated and impregnated wood oil palm (E. guineensis Jacq) were changed in their physical properties. Impregnation with coal ashfly provide the greatest response to changes in weight (in wet conditions) and after conditioning (dry) with the average percentage of weight gain of 198.16% and 66.41% respectively. Changes in volume indicates an increase of volume in the wet condition (imbibition) with the coal ashfly treatment gave highest value of 23.04 %, whereas after conditioning (dry) the highest value obtained in the treatment of gum rosin:ethanol with a volume increase of 13:44%. The highest changes of the density with the coal ashfly impregnation in wet condition (imbibition) in value of 142.32% and after conditioning (dry) of 57.87%. The result of reduction in water absorption (RWA) test showed that in the palm oil wood samples most stable by using of gum rosin : ethanol of 0.97%, whereas the increase in oil palm wood dimensional stability (ASE) is the best of 59.42% after acetylation with Acetic Anhydride: Xylene.

  8. Development and investigation of a selective latex flocculant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nikitin, I.N.; Preobrazhenskii, B.P.; Tsyrlov, M.Ya.

    1982-01-01

    Investigations were made on the use of two synthetic latexes as selective flocculants in the flotation cleaning of coal. The most commonly used latex in the industry contained sodium dibutylnaphthalenesulfonate, which is a biologically ''hard'' emulsifier. It was determined that butadiene-styrene latexes may successfully be used as selective coal sludge flocculants. The most efficient was a latex synthesized using biodegradable emulsifiers--potassium soaps of disproportionated rosin with a small quantity of synthetic fatty acids. Also, it was concluded that the values of the ash level in the flotation concentrate and tailings could be controlled by regulating the latex consumption.

  9. Fort Holabird Defense Investigative Service, Environmental Baseline Study

    DTIC Science & Technology

    1998-04-01

    INC (215)555-1212 Contact:TOM RICE (301)633-2114 Waste Quantity Info Source Waste Quantity Info Source DOOO F005 .00000 (N) .00000 (N...Of?« A-17 E3 PATAPSCO Bt A-16 24 CHARLES R. A-19 25 T. BAYARD W A-20 26 MABEL 1. PA A-21 27 CHRISTIAN 1 A-22 29 MARY WALTE A-23 31 CORNELIUS...A24 32 WILBUR REE! A25 28 ALBERT V. P A-26 19 C\\ RAYMOND L A-27 33 MABEL PAUL A-28 54 ROSINE SC 1 B*’ 52 ERNEST E. OF 1 B-2 51 HERBERT

  10. Soldering In Space Investigation Video

    NASA Technical Reports Server (NTRS)

    2004-01-01

    This video captures Mike Fincke melting solder during the first set of planned In-Space Soldering Investigation (ISSI) experiments onboard the International Space Station (ISS). In the video, Fincke touches the tip of the soldering iron to a wire wrapped with rosin-core solder. Review of the experiment video revealed melting kinetics, wetting characteristics, and equilibrium shape attainment of the solder charge. Samples returned to Earth were examined for porosity and flux distribution as well as microstructural development. ISSI's purpose was to find out how solder behaves in a weightless environment and promote our knowledge of fabrication and repair techniques that might be employed during extended space exploration missions.

  11. The Rise of Avatars in Positive Psychology: Enabling Military Cultures in a 3D World for Strengths of Character Development

    DTIC Science & Technology

    2010-03-01

    York.  Piaget , J.  (1977).  The  development  of thought:   Equilibration of  cognitive  structures, trans.  A Rosin.  New York:  Viking Press.  17...Cultures in a 3D World for Strengths of Character Development 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d. PROJECT...educators believe warrior strengths of character  to know, decide, and act are  cognitively ,  affectively, and socially  developmental  in  nature.  Game

  12. IBEX Sky Map Press Conference

    NASA Image and Video Library

    2009-10-14

    Don Mitchell, far left, Cassini spacecraft instrument scientist, IBEX co-Investigator, Johns Hopkins University Applied Physics Laboratory in Laurel, Md., answers questions on findings made by NASA's Interstellar Boundary Explorer, IBEX, at NASA Headquarters in Washington, Thursday, Oct. 10, 2009. Mitchell is joined by IBEX mission colleagues David McComas, far right, IBEX spacecraft principal investigator and senior executive director, Space Science and Engineering Division, Southwest Research Institute in San Antonio; Eric Christian, IBEX deputy mission scientist, NASA's Goddard Space Flight Center in Greenbelt, Md.; Rosine Lallement, senior scientist at the French National Center for Scientific Research in Paris; Lindsay Bartolone, second from left, lead of Education and Public Outreach at the Adler Planetarium in Chicago. Photo Credit: (NASA/Carla Cioffi)

  13. The study on the interdependence of spray characteristics and evaporation history of fuel spray in high temperature air crossflow

    NASA Astrophysics Data System (ADS)

    Zhu, J. Y.; Chin, J. S.

    1986-06-01

    A numerical calculation method is used to predict the variation of the characteristics of fuel spray moving in a high temperature air crossflow, mainly, Sauter mean diameter SMD, droplet size distribution index N of Rosin-Rammler distribution and evaporation percentage changing with downstream distance X from the nozzle. The effect of droplet heat-up period evaporation process and forced convection are taken into full account; thus, the calculation model is a very good approximation to the process of spray evaporation in a practical combustor, such as ramjet, aero-gas turbine, liquid propellant rocket, diesel and other liquid fuel-powered combustion devices. The changes of spray characteristics N, SMD and spray evaporation percentage with air velocity, pressure, temperature, fuel injection velocity, and the initial spray parameters are presented.

  14. Disruptive Technologies in Workmanship: pH-neutral Flux, CDM ESD Events, HDI PCBs

    NASA Technical Reports Server (NTRS)

    Plante, Jeannette F.

    2010-01-01

    This slide presentation describes what it calls "disruptive technologies", i.e., "Low-end disruption" occurs when the rate at which products improve exceeds the rate at which customers can adopt the new performance. Therefore, at some point the performance of the product overshoots the needs of certain customer segments. At this point, a disruptive technology may enter the market and provide a product which has lower performance than the incumbent but which exceeds the requirements of certain segments, thereby gaining a foothold in the market. This concept is viewed in impacting incumbent technologies Rosin Flux, with a pH-neutral water soluble Flux; electrostatic discharge models being disrupted by the charge device model (CDM) concept; and High Density Interconnect Printed Circuit Boards (HDI PCB).

  15. Size distributions of micro-bubbles generated by a pressurized dissolution method

    NASA Astrophysics Data System (ADS)

    Taya, C.; Maeda, Y.; Hosokawa, S.; Tomiyama, A.; Ito, Y.

    2012-03-01

    Size of micro-bubbles is widely distributed in the range of one to several hundreds micrometers and depends on generation methods, flow conditions and elapsed times after the bubble generation. Although a size distribution of micro-bubbles should be taken into account to improve accuracy in numerical simulations of flows with micro-bubbles, a variety of the size distribution makes it difficult to introduce the size distribution in the simulations. On the other hand, several models such as the Rosin-Rammler equation and the Nukiyama-Tanazawa equation have been proposed to represent the size distribution of particles or droplets. Applicability of these models to the size distribution of micro-bubbles has not been examined yet. In this study, we therefore measure size distribution of micro-bubbles generated by a pressurized dissolution method by using a phase Doppler anemometry (PDA), and investigate the applicability of the available models to the size distributions of micro-bubbles. Experimental apparatus consists of a pressurized tank in which air is dissolved in liquid under high pressure condition, a decompression nozzle in which micro-bubbles are generated due to pressure reduction, a rectangular duct and an upper tank. Experiments are conducted for several liquid volumetric fluxes in the decompression nozzle. Measurements are carried out at the downstream region of the decompression nozzle and in the upper tank. The experimental results indicate that (1) the Nukiyama-Tanasawa equation well represents the size distribution of micro-bubbles generated by the pressurized dissolution method, whereas the Rosin-Rammler equation fails in the representation, (2) the bubble size distribution of micro-bubbles can be evaluated by using the Nukiyama-Tanasawa equation without individual bubble diameters, when mean bubble diameter and skewness of the bubble distribution are given, and (3) an evaluation method of visibility based on the bubble size distribution and bubble

  16. An engineering approach to design of dextran microgels size fabricated by water/oil emulsification.

    PubMed

    Salimi-Kenari, Hamed; Imani, Mohammad; Nodehi, Azizollah; Abedini, Hossein

    2016-09-01

    A correlation, based on fluid mechanics, has been investigated for the mean particle diameter of crosslinked dextran microgels (CDMs) prepared via a water/oil emulsification methodology conducted in a single-stirred vessel. To this end, non-dimensional correlations were developed to predict the mean particle size of CDMs as a function of Weber number, Reynolds number and viscosity number similar to ones introduced for liquid-liquid dispersions. Moreover, a Rosin-Rammler distribution function has been successfully applied to the microgel particle size distributions. The correlations were validated using experimentally obtained mean particle sizes for CDMs prepared at different stirring conditions. The validated correlation is especially applicable to medical and pharmaceutical applications where strict control on the mean particle size and size distribution of CDMs are extremely essential. [Formula: see text].

  17. Guerilla Science: Mixing Science with Art, Music and Play

    NASA Astrophysics Data System (ADS)

    Rosin, Mark; Koski, Olivia; Science, Guerilla

    2013-01-01

    Guerilla Science is an international organization at the boundaries of adult/teen science education and live entertainment. Dedicated to science by stealth we mix science with art, music and play in unconventional environments like music festivals, art galleries, banquets, department stores and theaters. Over the last five years, Guerilla Science has impacted over 11 thousand members of the public and worked with more than one hundred science-partners. Findings from three external evaluations confirm that these events have been successful, and Guerilla Science has been featured in international media including Wired, Scientific American, Getty Images, and the BBC. In this presentation, the US director, Mark Rosin, will discuss Guerilla Science's astronomical outreach efforts, including events like the Intergalactic Travel Bureau, Extra-Terrestrial Broadcasting, and Sex on other Planets. He will also discuss how to get involved with the project.

  18. Stimulant Paste Preparation and Bark Streak Tapping Technique for Pine Oleoresin Extraction.

    PubMed

    Füller, Thanise Nogueira; de Lima, Júlio César; de Costa, Fernanda; Rodrigues-Corrêa, Kelly C S; Fett-Neto, Arthur G

    2016-01-01

    Tapping technique comprises the extraction of pine oleoresin, a non-wood forest product consisting of a complex mixture of mono, sesqui, and diterpenes biosynthesized and exuded as a defense response to wounding. Oleoresin is used to produce gum rosin, turpentine, and their multiple derivatives. Oleoresin yield and quality are objects of interest in pine tree biotechnology, both in terms of environmental and genetic control. Monitoring these parameters in individual trees grown in the field provides a means to examine the control of terpene production in resin canals, as well as the identification of genetic-based differences in resinosis. A typical method of tapping involves the removal of bark and application of a chemical stimulant on the wounded area. Here we describe the methods for preparing the resin-stimulant paste with different adjuvants, as well as the bark streaking process in adult pine trees.

  19. Molecular glass positive i-line photoresist materials containing 2,1,4-DNQ and acid labile group

    NASA Astrophysics Data System (ADS)

    Wang, Liyuan; Yu, Jinxing; Xu, Na

    2010-04-01

    Recent years increasing attention has been given to molecular glass resist materials. In this paper, maleopimaric acid, cycloaddition reaction product of rosin with maleic anhydride, was reacted with hydroxylamine and then further esterified with 2-diazo-1-naphthoquinone-4-sulfonyl chloride to give N-hydroxy maleopimarimide sulfonate. The carboxylic acid group of the compound was then protected by the reaction of this compound with vinyl ethyl ether or dihydropyran. Thus obtained compounds were amorphous. When irradiated with i-line light, the 2,1,4-DNQ group undergo photolysis not only to give off nitrogen gas but also generate sulfonic acid which can result in the decomposition of the acid labile group. So, a novel chemically amplified positive i-line molecular glass photoresists can be formed by the compound and other acidolytic molecular glass compounds. The lithographic performance of the resist materials is evaluated.

  20. Evaluation of alternative cleaners for solder flux and mold release removal

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lopez, E.P.; Peebles, D.E.; Reich, J.E.

    1991-01-01

    As part of a solvent substitution program, an evaluation of selected alternative cleaners for solder flux and mold release removal has been performed. Six cleaners were evaluated for their efficiency in removing a rosin mildly activated flux and a silicone mold release from copper, 17-4PH stainless steel, polyimide quartz glass and tin-lead surfaces. A parallel effort also studied deionized water removal of organic acid fluxes. Auger electron spectroscopy and X-ray photoelectron spectroscopy were used to determine relative elemental cleanliness of the outermost atomic layers. An Omega Meter Test was used to measure residual ionic contamination. Water drop contact angles weremore » used to measure the effectiveness of silicone removal from Cu substrates. In most cases, the cleanliness levels were good to excellent. 10 refs., 8 figs., 19 tabs.« less

  1. International Congress on Transposable Elements (ICTE) 2012 in Saint Malo and the sea of TE stories.

    PubMed

    Ainouche, Abdelkader; Bétermier, Mireille; Chandler, Mick; Cordaux, Richard; Cristofari, Gaël; Deragon, Jean-Marc; Lesage, Pascale; Panaud, Olivier; Quesneville, Hadi; Vaury, Chantal; Vieira, Cristina; Vitte, Clémentine

    2012-10-30

    An international conference on Transposable Elements (TEs) was held 21-24 April 2012 in Saint Malo, France. Organized by the French Transposition Community (GDR Elements Génétiques Mobiles et Génomes, CNRS) and the French Society of Genetics (SFG), the conference's goal was to bring together researchers from around the world who study transposition in diverse organisms using multiple experimental approaches. The meeting drew more than 217 attendees and most contributed through poster presentations (117), invited talks and short talks selected from poster abstracts (48 in total). The talks were organized into four scientific sessions, focused on: impact of TEs on genomes, control of transposition, evolution of TEs and mechanisms of transposition. Here, we present highlights from the talks given during the platform sessions. The conference was sponsored by Alliance pour les sciences de la vie et de la santé (Aviesan), Centre national de la recherche scientifique (CNRS), Institut national de la santé et de la recherche médicale (INSERM), Institut de recherche pour le développement (IRD), Institut national de la recherche agronomique (INRA), Université de Perpignan, Université de Rennes 1, Région Bretagne and Mobile DNA. CHAIR OF THE ORGANIZATION COMMITTEE: Jean-Marc Deragon ORGANIZERS: Abdelkader Ainouche, Mireille Bétermier, Mick Chandler, Richard Cordaux, Gaël Cristofari, Jean-Marc Deragon, Pascale Lesage, Didier Mazel, Olivier Panaud, Hadi Quesneville, Chantal Vaury, Cristina Vieira and Clémentine Vitte.

  2. The relationship between surface tension and the industrial performance of water-soluble polymers prepared from acid hydrolysis lignin, a saccharification by-product from woody materials.

    PubMed

    Matsushita, Yasuyuki; Imai, Masanori; Iwatsuki, Ayuko; Fukushima, Kazuhiko

    2008-05-01

    In this study, water-soluble anionic and cationic polymers were prepared from sulfuric acid lignin (SAL), an acid hydrolysis lignin, and the relationship between the surface tension of these polymers and industrial performance was examined. The SAL was phenolized (P-SAL) to enhance its solubility and reactivity. Sulfonation and the Mannich reaction with aminocarboxylic acids produced water-soluble anionic polymers and high-dispersibility gypsum paste. The dispersing efficiency increased as the surface tension decreased, suggesting that the fluidity of the gypsum paste increased with the polymer adsorption on the gypsum particle surface. Water-soluble cationic polymers were prepared using the Mannich reaction with dimethylamine. The cationic polymers showed high sizing efficiency under neutral papermaking conditions; the sizing efficiency increased with the surface tension. This suggests that the polymer with high hydrophilicity spread in the water and readily adhered to the pulp surface and the rosin, showing good retention.

  3. 40 CFR 721.1675 - Disulfonic acid rosin amine salt of a benzidine derivative (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... benzidine derivative (generic name). 721.1675 Section 721.1675 Protection of Environment ENVIRONMENTAL... benzidine derivative (generic name). (a) Chemical substance and significant new uses subject to reporting... derivative (PMN P-87-1337) is subject to reporting under this section for the significant new uses described...

  4. Fluorescence microscopy techniques for quantitative evaluation of organic biocide distribution in antifouling paint coatings: application to model antifouling coatings.

    PubMed

    Goodes, L R; Dennington, S P; Schuppe, H; Wharton, J A; Bakker, M; Klijnstra, J W; Stokes, K R

    2012-01-01

    A test matrix of antifouling (AF) coatings including pMMA, an erodible binder and a novel trityl copolymer incorporating Cu₂O and a furan derivative (FD) natural product, were subjected to pontoon immersion and accelerated rotor tests. Fluorescence and optical microscopy techniques were applied to these coatings for quantification of organic biocide and pigment distribution. Total leaching of the biocide from the novel copolymer binder was observed within 6 months of rotor immersion, compared to 35% from the pMMA coating. In pontoon immersions, 61% of the additive was lost from the pMMA coating, and 53% from the erodible binder. Profiles of FD content in the binders revealed an accelerated loss of additive from the surface of the CDP resulting from rosin degradation, compared to even depletion from pMMA. In all samples, release of the biocide was inhibited beyond the Cu₂O front, corresponding to the leached layer in samples where Cu₂O release occurred.

  5. Long-Term Effects of Soldering By-Products on Nickel-Coated Copper Wire

    NASA Technical Reports Server (NTRS)

    Rolin, T. D.; Hodge, R. E.

    2008-01-01

    An analysis of thirty-year-old, down graded flight cables was conducted to determine the makeup of a green material on the surface of the shielded wire near soldered areas and to ascertain if the green material had corroded the nickel-coated copper wire. Two likely candidates were possible due to the handling and environments to which these cables were exposed. The flux used to solder the cables is known to contain abietic acid, a carboxylic acid found in many pine rosins used for the soldering process. The resulting material copper abietate is green in color and is formed during the application of heat during soldering operations. Copper (II) chloride, which is also green in color is known to contaminate flight parts and is corrosive. Data is presented that shows the material is copper abietate, not copper (II) chloride, and more importantly that the abietate does not aggressively attack nickel-plated copper wire.

  6. Propagation of Valuable North Sumatera Benzoin Trees (Styrax Sp) Using Macrocutting Technique

    NASA Astrophysics Data System (ADS)

    Susilowati, A.; Hartini, K. S.; Rachmat, H. H.; Alvaroby, M.

    2017-03-01

    Kemenyan known as Sumatran benzoin is North Sumatera local species that produce high valuable rosin and prospective export comodities. However, sustainability of Sumatran benzoin production has many constraints such as instability of resin production, lack information of propagation technique and traditional management system. Until now, comprehensive information for Sumatran benzoin propagation system still not determined yet. The objectives of this research were (1) to get information about propagation technique of Sumatran benzoin and its suitable growing medium and 2) to get information on adventitious root formation in Sumatran benzoin cuttings. Cutting materials (Toba benzoin and Durame benzoin) were originated from 1 year old seedling propagated by seed. Media used were combination of sand : rice husk (1:0 v/v; 1/1 v/v). Results showed that interaction between media and benzoin species significantly affected primer and secondary root lenght. While planting medium significantly improved secondary root length and number. Benzoin species significantly affected primary and secondary root lenght, and secondary root number.

  7. Imaging and Analysis of Void-defects in Solder Joints Formed in Reduced Gravity using High-Resolution Computed Tomography

    NASA Technical Reports Server (NTRS)

    Easton, John W.; Struk, Peter M.; Rotella, Anthony

    2008-01-01

    As a part of efforts to develop an electronics repair capability for long duration space missions, techniques and materials for soldering components on a circuit board in reduced gravity must be developed. This paper presents results from testing solder joint formation in low gravity on a NASA Reduced Gravity Research Aircraft. The results presented include joints formed using eutectic tin-lead solder and one of the following fluxes: (1) a no-clean flux core, (2) a rosin flux core, and (3) a solid solder wire with external liquid no-clean flux. The solder joints are analyzed with a computed tomography (CT) technique which imaged the interior of the entire solder joint. This replaced an earlier technique that required the solder joint to be destructively ground down revealing a single plane which was subsequently analyzed. The CT analysis technique is described and results presented with implications for future testing as well as implications for the overall electronics repair effort discussed.

  8. The use of mental models in chemical risk protection: developing a generic workplace methodology.

    PubMed

    Cox, Patrick; Niewöhmer, Jörg; Pidgeon, Nick; Gerrard, Simon; Fischhoff, Baruch; Riley, Donna

    2003-04-01

    We adopted a comparative approach to evaluate and extend a generic methodology to analyze the different sets of beliefs held about chemical hazards in the workplace. Our study mapped existing knowledge structures about the risks associated with the use of perchloroethylene and rosin-based solder flux in differing workplaces. "Influence diagrams" were used to represent beliefs held by chemical experts; "user models" were developed from data elicited from open-ended interviews with the workplace users of the chemicals. The juxtaposition of expert and user understandings of chemical risks enabled us to identify knowledge gaps and misunderstandings and to reinforce appropriate sets of safety beliefs and behavior relevant to chemical risk communications. By designing safety information to be more relevant to the workplace context of users, we believe that employers and employees may gain improved knowledge about chemical hazards in the workplace, such that better chemical risk management, self-protection, and informed decision making develop over time.

  9. Effect of type and content of tackifier on adhesion of natural rubber and reclaimed natural rubber based sealant

    NASA Astrophysics Data System (ADS)

    Raethong, P.; Boonkerd, K.

    2017-07-01

    Adhesion property of natural rubber (NR) and reclaimed natural rubber (RNR) based sealant with concrete was studied here. The effect of tackifier type and loading on the tensile properties of the rubber based sealant sandwished between two flat cements was evaluated. There are three different tackifiers including Coumarone-indene resin (CI), petro resin (PE) and gum rosin (GR). The result initially showed that at the 20 phr of tackifier both NR and RNR sealant mixed with CI consumed the highest force to separate the rubber based sealant from the concrete. This might be due to the highest compatiblility between CI and rubber. Regardless of the tackifier type, all NR based sealants showed the cohesive failure while all RNR based sealants only showed the adhesive failure. Moreover, the NR based sealant seemed to be stronger than the RNR based one. When considering the effect of CI loading on the adhesion, it was shown that for both NR and RNR based sealents, the highest stress was observed when the rubber based sealant loaded with the 20 phr of CI.

  10. The influence of temperature and humidity on printed wiring board surface finishes: Immersion tin vs organic azoles

    NASA Astrophysics Data System (ADS)

    Ray, U.; Artaki, I.; Gordon, H. M.; Vianco, P. T.

    1994-08-01

    Substitution of lead-free solders in electronic assemblies requires changes in the conventional Sn:Pb finishes on substrates and component leads to prevent contamination of the candidate lead-free solder. Options for solderability preservative coatings on the printed wiring board include organic (azole or rosin/resin based) films and tin-based plated metallic coatings. This paper compares the solderability performance and corrosion protection effectiveness of electroless tin coatings vs organic azole films after exposure to a series of humidity and thermal cycling conditions. The solderability of immersion tin is directly related to the tin oxide growth on the surface and is not affected by the formation of SnCu intermetallic phases as long as the intermetallic phase is underneath a protective Sn layer. Thin azole films decompose upon heating in the presence of oxygen and lead to solderability degradation. Evaluations of lead-free solder pastes for surface mount assembly applications indicate that immersion tin significantly improves the spreading of Sn:Ag and Sn:Bi alloys as compared to azole surface finishes.

  11. Sustainable Elastomers from Renewable Biomass.

    PubMed

    Wang, Zhongkai; Yuan, Liang; Tang, Chuanbing

    2017-07-18

    Sustainable elastomers have undergone explosive growth in recent years, partly due to the resurgence of biobased materials prepared from renewable natural resources. However, mounting challenges still prevail: How can the chemical compositions and macromolecular architectures of sustainable polymers be controlled and broadened? How can their processability and recyclability be enabled? How can they compete with petroleum-based counterparts in both cost and performance? Molecular-biomass-derived polymers, such as polymyrcene, polymenthide, and poly(ε-decalactone), have been employed for constructing thermoplastic elastomers (TPEs). Plant oils are widely used for fabricating thermoset elastomers. We use abundant biomass, such as plant oils, cellulose, rosin acids, and lignin, to develop elastomers covering a wide range of structure-property relationships in the hope of delivering better performance. In this Account, recent progress in preparing monomers and TPEs from biomass is first reviewed. ABA triblock copolymer TPEs were obtained with a soft middle block containing a soybean-oil-based monomer and hard outer blocks containing styrene. In addition, a combination of biobased monomers from rosin acids and soybean oil was formulated to prepare triblock copolymer TPEs. Together with the above-mentioned approaches based on block copolymers, multigraft copolymers with a soft backbone and rigid side chains are recognized as the first-generation and second-generation TPEs, respectively. It has been recently demonstrated that multigraft copolymers with a rigid backbone and elastic side chains can also be used as a novel architecture of TPEs. Natural polymers, such as cellulose and lignin, are utilized as a stiff, macromolecular backbone. Cellulose/lignin graft copolymers with side chains containing a copolymer of methyl methacrylate and butyl acrylate exhibited excellent elastic properties. Cellulose graft copolymers with biomass-derived polymers as side chains were

  12. Controlling Release Kinetics of PLG Microspheres Using a Manufacturing Technique

    NASA Astrophysics Data System (ADS)

    Berchane, Nader

    2005-11-01

    Controlled drug delivery offers numerous advantages compared with conventional free dosage forms, in particular: improved efficacy and patient compliance. Emulsification is a widely used technique to entrap drugs in biodegradable microspheres for controlled drug delivery. The size of the formed microspheres has a significant influence on drug release kinetics. Despite the advantages of controlled drug delivery, previous attempts to achieve predetermined release rates have seen limited success. This study develops a tool to tailor desired release kinetics by combining microsphere batches of specified mean diameter and size distribution. A fluid mechanics based correlation that predicts the average size of Poly(Lactide-co-Glycolide) [PLG] microspheres from the manufacturing technique, is constructed and validated by comparison with experimental results. The microspheres produced are accurately represented by the Rosin-Rammler mathematical distribution function. A mathematical model is formulated that incorporates the microsphere distribution function to predict the release kinetics from mono-dispersed and poly-dispersed populations. Through this mathematical model, different release kinetics can be achieved by combining different sized populations in different ratios. The resulting design tool should prove useful for the pharmaceutical industry to achieve designer release kinetics.

  13. Hair growth is promoted by BeauTop via expression of EGF and FGF-7

    PubMed Central

    Lee, Chien-Ying; Yang, Chi-Yu; Lin, Ching-Che; Yu, Min-Chien; Sheu, Shuenn-Jyi; Kuan, Yu-Hsiang

    2018-01-01

    Minoxidil and finasteride have been approved to treat hair loss by the Food and Drug Administration. However, the further elucidation of treatments for hair loss, including those using Chinese herbal medicine, remains important clinically. BeauTop (BT) is a health food supplement which contains Ginseng radix, Astragali radix, Radix Angelicae sinensis, Ligustri fructus, Rehmannia glutinosa and Eclipta prostrata (Linn). Susbsequent to oral administration of BT at 0.6 g/kg/day to wax/rosin-induced alopecia in C57BL/6 mice, BT significantly induced hair growth at day 8 compared with control treatment (P<0.05). The expression levels of epidermal growth factor (EGF), and fibroblast growth factor (FGF)-7 were increased compared with control animals on day 8. In contrast, levels of FGF-5 of the BT group were reduced compared with the control on day 12. There were no effects on the expression of insulin-like growth factor 1. The results demonstrated that the mechanism of BT improving alopecia is potentially associated with modulation of EGF and FGF-7 levels. Taken together, it is suggested that BT may have a potential effect of the promotion of hair growth. PMID:29693180

  14. Design and evaluation of hydrophobic coated buoyant core as floating drug delivery system for sustained release of cisapride

    PubMed Central

    Jacob, Shery; Nair, Anroop B; Patil, Pandurang N

    2010-01-01

    An inert hydrophobic buoyant coated–core was developed as floating drug delivery system (FDDS) for sustained release of cisapride using direct compression technology. Core contained low density, porous ethyl cellulose, which was coated with an impermeable, insoluble hydrophobic coating polymer such as rosin. It was further seal coated with low viscosity hydroxypropyl methyl cellulose (HPMC E15) to minimize moisture permeation and better adhesion with an outer drug layer. It was found that stable buoyant core was sufficient to float the tablet more than 8 h without the aid of sodium bicarbonate and citric acid. Sustained release of cisapride was achieved with HPMC K4M in the outer drug layer. The floating lag time required for these novel FDDS was found to be zero, however it is likely that the porosity or density of the core is critical for floatability of these tablets. The in vitro release pattern of these tablets in simulated gastric fluid showed the constant and controlled release for prolonged time. It can be concluded that the hydrophobic coated buoyant core could be used as FDDS for gastroretentive delivery system of cisapride or other suitable drugs. PMID:24825997

  15. Phylogeny of kemenyan (Styrax sp.) from North Sumatra based on morphological characters

    NASA Astrophysics Data System (ADS)

    Susilowati, A.; Kholibrina, C. R.; Rachmat, H. H.; Munthe, M. A.

    2018-02-01

    Kemenyan is the most famous local tree species from North Sumatra. Kemenyan is known as rosin producer that very valuable for pharmacheutical, cosmetic, food preservatives and vernis. Based on its history, there were only two species of kemenyan those were kemenyan durame and toba, but in its the natural distribution we also found others species showing different characteristics with previously known ones. The objectives of this research were:The objectives of this research were: (1). To determine the morphological diversity of kemenyan in North Sumatra and (2). To determine phylogeny clustering based on the morphological characters. Data was collected from direct observation and morphological characterization, based on purposive sampling technique to those samples trees atPakpak Bharat, North Sumatra. Morphological characters were examined using descriptive analysis, phenotypic variability using standard deviation, and cluster analysis. The result showed that there was a difference between 4 species kemenyen (batak, minyak, durame and toba) according to 75 observed characters including flower, fruits, leaf, stem, bark, crown type, wood and the resin. Analysis and both quantitative and qualitative characters kemenyan clustered into two groups. In which, kemenyan toba separated with other clusters.

  16. 7 CFR 160.201 - Fees generally for field inspection and certification of naval stores and drum containers of rosin.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... tank trucks, per truck—$34.00. (2) Turpentine (Grading and incidental certification as to class...) Turpentine (inspection and certification as to kind, condition, volume, etc.). (i) In drums of 55 gallons...

  17. 7 CFR 160.201 - Fees generally for field inspection and certification of naval stores and drum containers of rosin.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... tank trucks, per truck—$34.00. (2) Turpentine (Grading and incidental certification as to class...) Turpentine (inspection and certification as to kind, condition, volume, etc.). (i) In drums of 55 gallons...

  18. 7 CFR 160.201 - Fees generally for field inspection and certification of naval stores and drum containers of rosin.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... tank trucks, per truck—$34.00. (2) Turpentine (Grading and incidental certification as to class...) Turpentine (inspection and certification as to kind, condition, volume, etc.). (i) In drums of 55 gallons...

  19. Evaluation on the characteristics of tin-silver-bismuth solder

    NASA Astrophysics Data System (ADS)

    Xia, Z.; Shi, Y.; Chen, Z.

    2002-02-01

    Tin-silver-bismuth solder is characterized by its lower melting point, good wetting behavior, and good mechanical property for which it is expected to be a new lead-free solder to replace tin-lead solder. In this article, Sn-3.33Ag-4.83Bi solder was investigated concerning its physical, spreading, and mechanical properties under specific conditions. Cooling curves and DSC results showed that it was close to eutectic composition (m.p. 210° 212 °C). Coefficiency of thermal expansion (CTE) of this solder, between that of PCBs and copper substrates, was beneficial to alleviate the thermal mismatch of the substrates. It was also a good electrical and thermal conductor. Using a rosin-based, mildly activated (RMA) flux, a spreading test indicated that SnAgBi solder paste had good solderability. Meanwhile, the solder had high tensile strength and fracture energy. Its fracture mechanism was a mixture of ductile and brittle fracture morphology. The metallographic and EDAX analyses indicated that it was composed of a tin-based solid solution and some intermetallic compound (IMC) that could strengthen the substrate. However, these large needle-like IMCs would cut the substrate and this resulted in the decreasing of the toughness of the solder.

  20. A Prekindergarten Curriculum Supplement for Enhancing Mainstream American English Knowledge in Nonmainstream American English Speakers

    PubMed Central

    Rosin, Peggy

    2016-01-01

    Purpose The purpose of this study was to evaluate the efficacy of a curriculum supplement designed to enhance awareness of Mainstream American English (MAE) in African American English- (AAE-) speaking prekindergarten children. Method Children in 2 Head Start classrooms participated in the study. The experimental classroom received the Talking and Learning for Kindergarten program (Edwards, Rosin, Gross, & Chen, 2013), which used contrastive analysis to highlight morphological, phonological, and pragmatic differences between MAE and AAE. The control classroom received the Kindness Curriculum (Flook, Goldberg, Pinger, & Davidson, 2014), which was designed to promote mindfulness and emotional self-regulation. The amount of instruction was the same across the 2 programs. Both classrooms participated in pre- and posttest assessments. Results Children in the experimental classroom, but not the control classroom, showed significant improvement in 3 norm-referenced measures of phonological awareness and in an experimental measure that evaluated comprehension of words that are ambiguous in AAE, but unambiguous in MAE, because of morphological and phonological differences between the 2 dialects. Conclusion Although more research needs to be done on the efficacy of the Talking and Learning for Kindergarten program, these results suggest that it is possible to enhance AAE-speaking children's awareness of MAE prior to kindergarten entry. PMID:27096218

  1. Development of karanja oil based offset printing ink in comparison with linseed oil.

    PubMed

    Bhattacharjee, Moumita; Roy, Ananda Sankar; Ghosh, Santinath; Dey, Munmun

    2011-01-01

    The conventional offset lithographic printing ink is mainly based on linseed oil. But in recent years, due to stiff competition from synthetic substitutes mainly from petroleum products, the crop production shrinks down to an unsustainable level, which increases the price of linseed oil. Though soyabean oil has replaced a major portion of linseed oil, it is also necessary to develop alternate cost effective vegetable oils for printing ink industry. The present study aims to evaluate the performance of karanja oil (Pongamia glabra) as an alternative of linseed oil in the formulation of offset printing ink because karanja oil is easily available in rural India. Physical properties of raw karanja oil are measured and compared with that of alkali refined linseed oil. Rosin modified phenolic resin based varnishes were made with linseed oil as well as with karanja oil and their properties are compared. Sheetfed offset inks of process colour yellow and cyan is chosen to evaluate the effect of karanja oil in ink properties. In conclusion, karanja oil can be accepted as an alternate vegetable oil source with its noticeable effect on print and post print properties with slower drying time on paper. However, the colour and odour of the oil will restrict its usage on offset inks.

  2. Design and characterization of a cough simulator.

    PubMed

    Zhang, Bo; Zhu, Chao; Ji, Zhiming; Lin, Chao-Hsin

    2017-02-23

    Expiratory droplets from human coughing have always been considered as potential carriers of pathogens, responsible for respiratory infectious disease transmission. To study the transmission of disease by human coughing, a transient repeatable cough simulator has been designed and built. Cough droplets are generated by different mechanisms, such as the breaking of mucus, condensation and high-speed atomization from different depths of the respiratory tract. These mechanisms in coughing produce droplets of different sizes, represented by a bimodal distribution of 'fine' and 'coarse' droplets. A cough simulator is hence designed to generate transient sprays with such bimodal characteristics. It consists of a pressurized gas tank, a nebulizer and an ejector, connected in series, which are controlled by computerized solenoid valves. The bimodal droplet size distribution is characterized for the coarse droplets and fine droplets, by fibrous collection and laser diffraction, respectively. The measured size distributions of coarse and fine droplets are reasonably represented by the Rosin-Rammler and log-normal distributions in probability density function, which leads to a bimodal distribution. To assess the hydrodynamic consequences of coughing including droplet vaporization and polydispersion, a Lagrangian model of droplet trajectories is established, with its ambient flow field predetermined from a computational fluid dynamics simulation.

  3. Saturation dependence of the quadrature conductivity of oil-bearing sands

    NASA Astrophysics Data System (ADS)

    Schmutz, M.; Blondel, A.; Revil, A.

    2012-02-01

    We have investigated the complex conductivity of oil-bearing sands with six distinct oil types including sunflower oil, silicone oil, gum rosin, paraffin, engine oil, and an industrial oil of complex composition. In all these experiments, the oil was the non-wetting phase. The in-phase (real) conductivity follows a power law relationship with the saturation (also known as the second Archie's law) but with a saturation exponent n raging from 1.1 to 3.1. In most experiments, the quadrature conductivity follows also a power law relationship with the water saturation but with a power law exponent p can be either positive or negative. For some samples, the quadrature conductivity first increases with saturation and then decreases indicating that two processes compete in controlling the quadrature conductivity. One is related to the insulating nature of the oil phase and a second could be associated with the surface area of the oil / water interface. The quadrature conductivity seems to be influenced not only by the value of the saturation exponent n (according to the Vinegar and Waxman model, p = n - 1), but also by the surface area between the oil phase and the water phase especially for very water-repellent oil having a fractal oil-water interface.

  4. Inverse estimation of the spheroidal particle size distribution using Ant Colony Optimization algorithms in multispectral extinction technique

    NASA Astrophysics Data System (ADS)

    He, Zhenzong; Qi, Hong; Wang, Yuqing; Ruan, Liming

    2014-10-01

    Four improved Ant Colony Optimization (ACO) algorithms, i.e. the probability density function based ACO (PDF-ACO) algorithm, the Region ACO (RACO) algorithm, Stochastic ACO (SACO) algorithm and Homogeneous ACO (HACO) algorithm, are employed to estimate the particle size distribution (PSD) of the spheroidal particles. The direct problems are solved by the extended Anomalous Diffraction Approximation (ADA) and the Lambert-Beer law. Three commonly used monomodal distribution functions i.e. the Rosin-Rammer (R-R) distribution function, the normal (N-N) distribution function, and the logarithmic normal (L-N) distribution function are estimated under dependent model. The influence of random measurement errors on the inverse results is also investigated. All the results reveal that the PDF-ACO algorithm is more accurate than the other three ACO algorithms and can be used as an effective technique to investigate the PSD of the spheroidal particles. Furthermore, the Johnson's SB (J-SB) function and the modified beta (M-β) function are employed as the general distribution functions to retrieve the PSD of spheroidal particles using PDF-ACO algorithm. The investigation shows a reasonable agreement between the original distribution function and the general distribution function when only considering the variety of the length of the rotational semi-axis.

  5. Change Detection Algorithms for Surveillance in Visual IoT: A Comparative Study

    NASA Astrophysics Data System (ADS)

    Akram, Beenish Ayesha; Zafar, Amna; Akbar, Ali Hammad; Wajid, Bilal; Chaudhry, Shafique Ahmad

    2018-01-01

    The VIoT (Visual Internet of Things) connects virtual information world with real world objects using sensors and pervasive computing. For video surveillance in VIoT, ChD (Change Detection) is a critical component. ChD algorithms identify regions of change in multiple images of the same scene recorded at different time intervals for video surveillance. This paper presents performance comparison of histogram thresholding and classification ChD algorithms using quantitative measures for video surveillance in VIoT based on salient features of datasets. The thresholding algorithms Otsu, Kapur, Rosin and classification methods k-means, EM (Expectation Maximization) were simulated in MATLAB using diverse datasets. For performance evaluation, the quantitative measures used include OSR (Overall Success Rate), YC (Yule's Coefficient) and JC (Jaccard's Coefficient), execution time and memory consumption. Experimental results showed that Kapur's algorithm performed better for both indoor and outdoor environments with illumination changes, shadowing and medium to fast moving objects. However, it reflected degraded performance for small object size with minor changes. Otsu algorithm showed better results for indoor environments with slow to medium changes and nomadic object mobility. k-means showed good results in indoor environment with small object size producing slow change, no shadowing and scarce illumination changes.

  6. Automatic wound infection interpretation for postoperative wound image

    NASA Astrophysics Data System (ADS)

    Hsu, Jui-Tse; Ho, Te-Wei; Shih, Hsueh-Fu; Chang, Chun-Che; Lai, Feipei; Wu, Jin-Ming

    2017-02-01

    With the growing demand for more efficient wound care after surgery, there is a necessity to develop a machine learning based image analysis approach to reduce the burden for health care professionals. The aim of this study was to propose a novel approach to recognize wound infection on the postsurgical site. Firstly, we proposed an optimal clustering method based on unimodal-rosin threshold algorithm to extract the feature points from a potential wound area into clusters for regions of interest (ROI). Each ROI was regarded as a suture site of the wound area. The automatic infection interpretation based on the support vector machine is available to assist physicians doing decision-making in clinical practice. According to clinical physicians' judgment criteria and the international guidelines for wound infection interpretation, we defined infection detector modules as the following: (1) Swelling Detector, (2) Blood Region Detector, (3) Infected Detector, and (4) Tissue Necrosis Detector. To validate the capability of the proposed system, a retrospective study using the confirmation wound pictures that were used for diagnosis by surgical physicians as the gold standard was conducted to verify the classification models. Currently, through cross validation of 42 wound images, our classifiers achieved 95.23% accuracy, 93.33% sensitivity, 100% specificity, and 100% positive predictive value. We believe this ability could help medical practitioners in decision making in clinical practice.

  7. Synthesis and characterization of grinding aid fly ash blended mortar effect on bond strength of masonry prisms

    NASA Astrophysics Data System (ADS)

    Krishnaraj, L.; Ravichandran, P. T.; Sagadevan, Suresh

    2018-04-01

    The aim of the present work is to study the effect of particle size reduction by applying top-down nanotechnology such as ball mill grinding process with the addition of amine-based grinding aids. The particle size reduction in synthesis process and its characterization were investigated for fly ash particles. The Rosin-Rammler-Bennet (RRB) distribution model using mathematical formulations were studied for fly ash ground particles. The hardened properties of grinding aid fly ash composite mortar were studied using compressive strength test. The optimum grinding time was 120 min identified through the particle size distribution analysis. The mean particle size decreased from 92.09 μm to 10.5 μm in which there is 89% reduction in particle size due to the grinding of fly ash particle with grinding aids. The compressive strength results show that substitutions of Ordinary Portland Cement (OPC) mortar by Amine-based Grinding aid Fly Ash (AGFA) 15% gives 12, 23% and at 30% gives 6, 8% of higher strength compare to the substitutions of raw fly ash. The addition of grinding aids in grinding process gives more advantages to reduce the particle size without changing chemical composition. The AGFA sample shows better performance in compressive strength and bond strength behavior of masonry prism. It may suggest that amine based grinding aids play a vital role and feasible to use in fly ash grinding process.

  8. Immunization with Leishmania donovani protein disulfide isomerase DNA construct induces Th1 and Th17 dependent immune response and protection against experimental visceral leishmaniasis in Balb/c mice.

    PubMed

    Amit, Ajay; Vijayamahantesh; Dikhit, Manas R; Singh, Ashish Kumar; Kumar, Vikash; Suman, Shashi S; Singh, Ashu; Kumar, Akhilesh; Thakur, Ajit Kumar; Das, Vidyanand Ravi; Das, Pradeep; Bimal, Sanjiva

    2017-02-01

    In the present study, the efficacy of Leishmania donovani protein disulfide isomerase (LdPDI) as a DNA vaccine was evaluated in BALB/C mice. Mice immunized with the LdPDI-DNA construct were found to be the most immuno-reactive, as the construct induced higher T-cell proliferation. The increased T-cell proliferation was associated with a substantial rise in Th1 and Th17+ CD4 cell response and triggered a higher proportion of CD8+ T cells for the release of interferon-gamma along with a reduced splenic parasite load on Days20 and 60 post challenge (PC). Furthermore, the vaccine construct triggered increased interferon (IFN)-γ, interleukin(IL)-17A, and IL-22 release accompanied by decreased extracellular signal-regulated kinases (ERK) 1/2 signaling and increased mitogen-activated protein kinase (MAPK) signaling coinciding with an increase in the amount of nitrite and reactive oxygen species (ROS)in vaccinating the splenocyts. We summarize from our data that the PDI-DNA construct of Leishmania donovani has the potential to elicit protective immunity through the pro-inflammatory cytokines of CD8+ and CD4+(Th1 and Th17) following an intervention in the downstream signaling event of ERK1/2 (probably through p38MAPK signaling). Therefore, the study suggests a new control against visceral leishmaniasis in the future. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Environmental friendly crush-magnetic separation technology for recycling metal-plated plastics from end-of-life vehicles.

    PubMed

    Xue, Mianqiang; Li, Jia; Xu, Zhenming

    2012-03-06

    Metal-plated plastics (MPP), which are important from the standpoint of aesthetics or even performance, are increasingly employed in a wide variety of situations in the automotive industry. Serious environmental problems will be caused if they are not treated appropriately. Therefore, recycling of MPP is an important subject not only for resource recycling but also for environmental protection. This work represents a novel attempt to deal with the MPP. A self-designed hammer crusher was used to liberate coatings from the plastic substrate. The size distribution of particles was analyzed and described by the Rosin-Rammler function model. The optimum retaining time of materials in the crusher is 3 min. By this time, the liberation rate of the materials can reach 87.3%. When the density of the suspension is 31,250 g/m(3), the performance of liberation is the best. Two-step magnetic separation was adopted to avoid excessive crushing and to guarantee the quality of products. Concerning both the separation efficiency and grade of products, the optimum rotational speed of the magnetic separator is 50-70 rpm. On the basis of the above studies about the liberating and separating behavior of the materials, a continuous recycling system (the technology of crush-magnetic separation) is developed. This recycling system provides a feasible method for recycling MPP efficiently, economically, and environmentally.

  10. Evaluation of certain food additives and contaminants. Eightieth report of the Joint FAO/WHO Expert Committee on Food Additives.

    PubMed

    2016-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and contaminants and to prepare specifications for identity and purity. The first part of the report contains a brief description of general considerations addressed at the meeting, including updates on matters of interest to the work of the Committee. A summary follows of the Committee's evaluations of technical, toxicological and/or dietary exposure data for seven food additives (benzoates; lipase from Fusarium heterosporum expressed in Ogataea polymorpha; magnesium stearate; maltotetraohydrolase from Pseudomonas stutzeri expressed in Bacillus licheniformis; mixed β-glucanase, cellulase and xylanase from Rasamsonia emersonii; mixed β-glucanase and xylanase from Disporotrichum dimorphosporum; polyvinyl alcohol (PVA)- polyethylene glycol (PEG) graft copolymer) and two groups of contaminants (non-dioxin-like polychlorinated biphenyls and pyrrolizidine alkaloids). Specifications for the following food additives were revised or withdrawn: advantame; annatto extracts (solavnt extracted bixin, ad solvent-extracted norbixin); food additives containing aluminium and/or silicon (aluminium silicate; calcium aluminium silicate; calcium silicate; silicon dioxide, amorphous; sodium aluminium silicate); and glycerol ester of gum rosin. Annexed to the report are tables or text summarizing the toxicological and dietary exposure information and information on specifications as well as the Committees recommendations on the food additives and contaminants considered at this meeting.

  11. The Identification of the Mediterranean cyclones main classical trajectories towards Romania by using objective methods based on mathematical algorithms

    NASA Astrophysics Data System (ADS)

    Oana, Catrina; Parding, Kajsa Maria; Stefan, Sabina

    2017-04-01

    The importance of knowledge on the trajectories that Mediterranean cyclones follows toward Romania is fundamental because most of the times the weather phenomena that accompany them determine significant economic damage and not only. In the specialized literature, the principal classic trajectories on which the Mediterranean cyclones pass toward the south-east of Europe and by default toward Romania, causing in these areas a crucial weather conditions change in all aspects at any time during the year, have been determined in subjectively mode, many years ago, by C. Sorodoc (1962) E. I. Bordei (1983). Starting from the known 9 classic trajectories determined subjectively, in this study it was aimed and subsequently carried out their identification by this date, but objectively, using the method based on mathematic algorithms developed by Rasmus E. Benestad, Abdelkader Mezghani, and Kajsa M. Parding (2006). The study was carried out between January 2003 and December 2015, taking into account the fact that the presence of the Mediterranean cyclones may be established almost every month, these representing important links of the atmosphere movement over Europe. The data used by the daily review have contained values, in grid points, of the mean pressure field at sea level (MSLP), with spatial resolution of 0.75° x 0.75° and 6 hours temporal coverage, originating from ECMWF, ERA-Interim project (2006), and the chosen field of interest was between 15°W - 40°E and 30°N - 50°N. Of the total number of Mediterranean cyclones identified objectively, that followed trajectories toward Romania, were randomly selected only a few cases, which indicates the similarity between the paths of classic subjectively determined and those determined objectively. Validation of the results consisted in the first phase in a comparison between the trajectories identified with the classic trajectories determined subjectively, then was carried out a second validation, by analysis of the

  12. Synchronized droplet size measurements for Coal-Water-Slurry (CWS) diesel sprays of an electronically-controlled fuel injection system

    NASA Astrophysics Data System (ADS)

    Kihm, K. D.; Terracina, D. P.; Payne, S. E.; Caton, J. A.

    Experiments were completed to study intermittent coal-water slurry (CWS) fuel sprays injected from an electronically-controlled accumulator injector system. A laser diffraction particle analyzing (LDPA) technique was used to measure the spray diameters (Sauter mean diameter, SMD) assuming the Rosin-Rammler two parameter model. In order to ensure an accurate synchronization of the measurement with the intermittent sprays, a new synchronization technique was developed using the light extinction signal as a triggering source for the data taking initiation. This technique allowed measurement of SMD's near the spray tip where the light extinction was low and the data were free from the multiscattering bias. Coal-water slurry fuel with 50% coal loading in mass containing 5 (mu)m mass median diameter coal particulates was considered. Injection pressures ranging from 28 to 110 MPa, two different nozzle orifice diameters, 0.2 ad 0.4 mm, and four axial measurement locations from 60 to 120 mm from the nozzle orifice were studied. Measurements were made for pressurized (2.0 MPa in gauge) and for ambient chamber conditions. The spray SMD showed an increase with the distance of the axial measurement location and with the ambient gas density, and showed a decrease with increasing injection pressure. A correlation of the Sauter mean diameter with the injection conditions was determined. The results were also compared with previous SMD correlations that were available only for diesel fuel sprays.

  13. Chemical profiling and adulteration screening of Aquilariae Lignum Resinatum by Fourier transform infrared (FT-IR) spectroscopy and two-dimensional correlation infrared (2D-IR) spectroscopy

    NASA Astrophysics Data System (ADS)

    Qu, Lei; Chen, Jian-bo; Zhang, Gui-Jun; Sun, Su-qin; Zheng, Jing

    2017-03-01

    As a kind of expensive perfume and valuable herb, Aquilariae Lignum Resinatum (ALR) is often adulterated for economic motivations. In this research, Fourier transform infrared (FT-IR) spectroscopy is employed to establish a simple and quick method for the adulteration screening of ALR. First, the principal chemical constituents of ALR are characterized by FT-IR spectroscopy at room temperature and two-dimensional correlation infrared (2D-IR) spectroscopy with thermal perturbation. Besides the common cellulose and lignin compounds, a certain amount of resin is the characteristic constituent of ALR. Synchronous and asynchronous 2D-IR spectra indicate that the resin (an unstable secondary metabolite) is more sensitive than cellulose and lignin (stable structural constituents) to the thermal perturbation. Using a certified ALR sample as the reference, the infrared spectral correlation threshold is determined by 30 authentic samples and 6 adulterated samples. The spectral correlation coefficient of an authentic ALR sample to the standard reference should be not less than 0.9886 (p = 0.01). Three commercial adulterated ALR samples are identified by the correlation threshold. Further interpretation of the infrared spectra of the adulterated samples indicates the common adulterating methods - counterfeiting with other kind of wood, adding ingredient such as sand to increase the weight, and adding the cheap resin such as rosin to increase the content of resin compounds. Results of this research prove that FT-IR spectroscopy can be used as a simple and accurate quality control method of ALR.

  14. Final Progress Report: Internship at Los Alamos National Laboratory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dunham, Ryan Q.

    2012-08-10

    Originally I was tasked fluidized bed modeling, however, I changed projects. While still working with ANSYS Fluent, I performed a study of particle tracks in glove boxes. This is useful from a Health-Physics perspective, dealing respirable particles that can be hazardous to the human body. I iteratively tested different amounts of turbulent particles in a steady-state flow. The goal of this testing was to discover how Fluent handles built-in Rosin-Rammler distributions for particle injections. I worked on the health physics flow problems and distribution analysis under the direction of two mentors, Bruce Letellier and Dave Decroix. I set up andmore » ran particle injection calculations using Fluent. I tried different combinations of input parameters to produce sets of 500,000, 1 million, and 1.5 million particles to determine what a good test case would be for future experiments. I performed a variety of tasks in my work as an Undergraduate Student Intern at LANL this summer, and learned how to use a powerful CFD application in addition to expanding my skills in MATLAB. I enjoyed my work at LANL and hope to be able to use the experience here to further my career in the future working in a security-conscious environment. My mentors provided guidance and help with all of my projects and I am grateful for the opportunity to work at Los Alamos National Laboratory.« less

  15. [Effects of Huoxue Bushen Mixture on skin blood vessel neogenesis and vascular endothelial growth factor expression in hair follicle of C57BL/6 mice].

    PubMed

    Gao, Shang-pu; Huang, Lan; Yang, Xin-wei

    2007-03-01

    To investigate the possible stimulating mechanism of Huoxue Bushen Mixture (HXBSM), a traditional Chinese compound medicine, on hair growth of mice via measuring the variance of skin blood vessel neogenesis and vascular endothelial growth factor (VEGF) expression in the hair follicle. Hot rosin and paraffin mixture depilation were used to induce C57BL/6 mice hair follicle to enter from telogen into anagen. Ninety C57BL/6 mice were divided into 3 groups randomly: HXBSM group, Yangxue Shengfa Capsule (YXSFC, another traditional Chinese compound medicine) group and untreated group. The mice were fed with corresponding drugs after modeling. The hair growth of the mice was observed every day. Every ten mice out of each group were executed respectively at day 4, 11 and day 17. Skin blood vessel neogenesis was counted through pathological section and VEGF expression in the hair follicle was measured via immunohistochemical method. The number of local blood vessel neogenisis in the HXBSM group observed was larger than that in the untreated group at day 4 (P<0.05); and evidently larger than that in the YXSFC group and the untreated group at day 11 (P<0.05). The expression of VEGF in the hair follicle was distinctively higher than that in the YXSFC group and the untreated group at day 11 and day 17 (P<0.05). HXBSM up-regulates VEGF expression to accelerate blood vessel neogenesis and hair growth.

  16. Synthesis of magnetic molecularly imprinted polymers for the selective separation and determination of metronidazole in cosmetic samples.

    PubMed

    Liu, Min; Li, Xiao-Yan; Li, Jun-Jie; Su, Xiao-Meng; Wu, Zong-Yuan; Li, Peng-Fei; Lei, Fu-Hou; Tan, Xue-Cai; Shi, Zhan-Wang

    2015-05-01

    In this study, novel magnetic molecularly imprinted polymers (MMIPs) were developed as a sorbent for solid-phase extraction (SPE) and used for the selective separation of metronidazole (MNZ) in cosmetics; MNZ was detected by high-performance liquid chromatography (HPLC). First, magnetic Fe3O4 nanoparticles (NPs) were prepared by the co-precipitation of Fe(2+)and Fe(3+) ions in an ammonia solution; then oleic acid (OA) was modified onto the surface of Fe3O4NPs. Finally, the MMIP was prepared by aqueous suspension polymerization, involving the copolymerization of Fe3O4NPs@OA with MNZ as the template molecule, methacrylic acid (MAA) as the functional monomer, ethylene glycol maleic rosinate acrylate (EGMRA) as the cross-linking agent, and 2,2-azobisisobutyronitrile (AIBN) as the initiator. The MMIP materials showed high selective adsorption capacity and fast binding kinetics for MNZ; the maximum adsorption amount of the MMIP to MNZ was 46.7 mg/g. The assay showed a linear range from 0.1 to 20.0 μg/mL for MNZ with the correlation coefficient 0.999. The relative standard deviations (RSD) of intra- and inter-day ranging from 0.71 to 2.45% and from 1.06 to 5.20% were obtained. The MMIP can be applied to the enrichment and determination of MNZ in cosmetic products with the recoveries of spiked toner, powder, and cream cosmetic samples ranging from 90.6 to 104.2, 84.1 to 91.4, and 90.3 to 100.4%, respectively, and the RSD was <3.54%.

  17. Qualitative analysis of tackifier resins in pressure sensitive adhesives using direct analysis in real time time-of-flight mass spectrometry.

    PubMed

    Mess, Aylin; Vietzke, Jens-Peter; Rapp, Claudius; Francke, Wittko

    2011-10-01

    Tackifier resins play an important role as additives in pressure sensitive adhesives (PSAs) to modulate their desired properties. With dependence on their origin and processing, tackifier resins can be multicomponent mixtures. Once they have been incorporated in a polymer matrix, conventional chemical analysis of tackifiers usually tends to be challenging because a suitable sample pretreatment and/or separation is necessary and all characteristic components have to be detected for an unequivocal identification of the resin additive. Nevertheless, a reliable analysis of tackifiers is essential for product quality and safety reasons. A promising approach for the examination of tackifier resins in PSAs is the novel direct analysis in real time mass spectrometry (DART-MS) technique, which enables screening analysis without time-consuming sample preparation. In the present work, four key classes of tackifier resins were studied (rosin, terpene phenolic, polyterpene, and hydrocarbon resins). Their corresponding complex mass spectra were interpreted and used as reference spectra for subsequent analyses. These data were used to analyze tackifier additives in synthetic rubber and acrylic adhesive matrixes. To prove the efficiency of the developed method, complete PSA products containing two or three different tackifiers were analyzed. The tackifier resins were successfully identified, while measurement time and interpretation took less than 10 mins per sample. Determination of resin additives in PSAs can be performed down to 0.1% (w/w, limit of detection) using the three most abundant signals for each tackifier. In summary, DART-MS is a rapid and efficient screening method for the analysis of various tackifiers in PSAs.

  18. Particle size distribution of brown and white rice during gastric digestion measured by image analysis.

    PubMed

    Bornhorst, Gail M; Kostlan, Kevin; Singh, R Paul

    2013-09-01

    The particle size distribution of foods during gastric digestion indicates the amount of physical breakdown that occurred due to the peristaltic movement of the stomach walls in addition to the breakdown that initially occurred during oral processing. The objective of this study was to present an image analysis technique that was rapid, simple, and could distinguish between food components (that is, rice kernel and bran layer in brown rice). The technique was used to quantify particle breakdown of brown and white rice during gastric digestion in growing pigs (used as a model for an adult human) over 480 min of digestion. The particle area distributions were fit to a Rosin-Rammler distribution function. Brown and white rice exhibited considerable breakdown as the number of particles per image decreased over time. The median particle area (x(50)) increased during digestion, suggesting a gastric sieving phenomenon, where small particles were emptied and larger particles were retained for additional breakdown. Brown rice breakdown was further quantified by an examination of the bran layer fragments and rice grain pieces. The percentage of total particle area composed of bran layer fragments was greater in the distal stomach than the proximal stomach in the first 120 min of digestion. The results of this study showed that image analysis may be used to quantify particle breakdown of a soft food product during gastric digestion, discriminate between different food components, and help to clarify the role of food structure and processing in food breakdown during gastric digestion. © 2013 Institute of Food Technologists®

  19. Chemical profiling and adulteration screening of Aquilariae Lignum Resinatum by Fourier transform infrared (FT-IR) spectroscopy and two-dimensional correlation infrared (2D-IR) spectroscopy.

    PubMed

    Qu, Lei; Chen, Jian-Bo; Zhang, Gui-Jun; Sun, Su-Qin; Zheng, Jing

    2017-03-05

    As a kind of expensive perfume and valuable herb, Aquilariae Lignum Resinatum (ALR) is often adulterated for economic motivations. In this research, Fourier transform infrared (FT-IR) spectroscopy is employed to establish a simple and quick method for the adulteration screening of ALR. First, the principal chemical constituents of ALR are characterized by FT-IR spectroscopy at room temperature and two-dimensional correlation infrared (2D-IR) spectroscopy with thermal perturbation. Besides the common cellulose and lignin compounds, a certain amount of resin is the characteristic constituent of ALR. Synchronous and asynchronous 2D-IR spectra indicate that the resin (an unstable secondary metabolite) is more sensitive than cellulose and lignin (stable structural constituents) to the thermal perturbation. Using a certified ALR sample as the reference, the infrared spectral correlation threshold is determined by 30 authentic samples and 6 adulterated samples. The spectral correlation coefficient of an authentic ALR sample to the standard reference should be not less than 0.9886 (p=0.01). Three commercial adulterated ALR samples are identified by the correlation threshold. Further interpretation of the infrared spectra of the adulterated samples indicates the common adulterating methods - counterfeiting with other kind of wood, adding ingredient such as sand to increase the weight, and adding the cheap resin such as rosin to increase the content of resin compounds. Results of this research prove that FT-IR spectroscopy can be used as a simple and accurate quality control method of ALR. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Assessing the impact of national level interventions on workplace respiratory disease in the UK: part 2--regulatory activity by the Health and Safety Executive.

    PubMed

    Stocks, S J; McNamee, R; Turner, S; Carder, M; Agius, R M

    2013-07-01

    To investigate whether interventions implemented by the UK Health and Safety Executive addressing exposure to isocyanate-based spray paints in motor vehicle repair (MVR), flour dust in craft bakeries, rosin-based solder flux fume (RBSFF) in the electronics industry, metalworking fluids and wood dust coincided with a decline in incidence of work-related short latency respiratory disease (SLRD) or asthma in the target groups. Changes in the incidence of SLRD reported to a UK-based surveillance scheme were compared using a longitudinal, negative binomial regression model with β distributed random effects. An interrupted time series design was used and comparisons according to inclusion or exclusion in the target group were made by including a statistical interactions expressed as a ratio of incidence rate ratios (RIRRs) in the model. The incidence of SLRD attributed to flour dust significantly increased relative to all other agents (RIRR: 1.10; 95% CI 1.06 to 1.16) whereas SLRD attributed to RBSFF significantly declined relative to all other agents (0.94; 0.90 to 0.99). No significant changes in the incidence of SLRD attributed to wood dust (1.03; 0.91 to 1.16) or spray paints (1.03; 0.95 to 1.11) relative to all other agents were observed. A higher proportion of reports originated from the industries targeted by the intervention for RBSFF (65/107; 61%) than spray painting (27/93; 27%) or wood dust (16/42; 38%). These data support a beneficial effect of interventions to reduce exposure to RBSFF but an increase in SLRD attributed to flour dust may indicate increased exposure or increased awareness of the problem.

  1. Pesticidal seed coats based on azadirachtin-A: release kinetics, storage life and performance.

    PubMed

    Nisar, Keyath; Kumar, Jitendra; Arun Kumar, M B; Walia, Suresh; Shakil, Najam A; Parsad, Rajender; Parmar, Balraj S

    2009-02-01

    Infestation of seeds by pests during storage leads to deterioration in quality. Seed coating is an effective option to overcome the menace. Unlike synthetic fungicidal seed coats, little is known of those based on botanicals. This study aims at developing azadirachtin-A-based pesticidal seed coats to maintain seed quality during storage. Polymer- and clay-based coats containing azadirachtin-A were prepared and evaluated for quality maintenance of soybean seed during storage. Gum acacia, gum tragacanth, rosin, ethyl cellulose, hydroxyethyl cellulose, polyethyl methacrylate, methyl cellulose, polyethylene glycol, polyvinyl chloride, polyvinyl acetate, polyvinyl pyrrolidone and Agrimer VA 6 polymers and the clay bentonite were used as carriers. The time for 50% release (t(1/2)) of azadirachtin-A into water from the seeds coated with the different coats ranged from 8.02 to 21.36 h. The half-life (T(1/2)) of azadirachtin-A in the coats on seed ranged from 4.37 to 11.22 months, as compared with 3.45 months in azadirachtin-A WP, showing an increase by a factor of nearly 1.3-3.3 over the latter. The coats apparently acted as a barrier to moisture to reduce azadirachtin-A degradation and prevented proliferation of storage fungi. Polyethyl methacrylate, polyvinyl acetate and polyvinyl pyrrolidone were significantly superior to the other polymers. Azadirachtin-A showed a significant positive correlation with seed germination and vigour, and negative correlation with moisture content. Effective polymeric carriers for seed coats based on azadirachtin-A are reported. These checked seed deterioration during storage by acting as a barrier to moisture and reduced the degradation of azadirachtin-A.

  2. Reference Genes for qPCR Analysis in Resin-Tapped Adult Slash Pine As a Tool to Address the Molecular Basis of Commercial Resinosis

    PubMed Central

    de Lima, Júlio C.; de Costa, Fernanda; Füller, Thanise N.; Rodrigues-Corrêa, Kelly C. da Silva; Kerber, Magnus R.; Lima, Mariano S.; Fett, Janette P.; Fett-Neto, Arthur G.

    2016-01-01

    Pine oleoresin is a major source of terpenes, consisting of turpentine (mono- and sesquiterpenes) and rosin (diterpenes) fractions. Higher oleoresin yields are of economic interest, since oleoresin derivatives make up a valuable source of materials for chemical industries. Oleoresin can be extracted from living trees, often by the bark streak method, in which bark removal is done periodically, followed by application of stimulant paste containing sulfuric acid and other chemicals on the freshly wounded exposed surface. To better understand the molecular basis of chemically-stimulated and wound induced oleoresin production, we evaluated the stability of 11 putative reference genes for the purpose of normalization in studying Pinus elliottii gene expression during oleoresinosis. Samples for RNA extraction were collected from field-grown adult trees under tapping operations using stimulant pastes with different compositions and at various time points after paste application. Statistical methods established by geNorm, NormFinder, and BestKeeper softwares were consistent in pointing as adequate reference genes HISTO3 and UBI. To confirm expression stability of the candidate reference genes, expression profiles of putative P. elliottii orthologs of resin biosynthesis-related genes encoding Pinus contorta β-pinene synthase [PcTPS-(−)β-pin1], P. contorta levopimaradiene/abietadiene synthase (PcLAS1), Pinus taeda α-pinene synthase [PtTPS-(+)αpin], and P. taeda α-farnesene synthase (PtαFS) were examined following stimulant paste application. Increased oleoresin yields observed in stimulated treatments using phytohormone-based pastes were consistent with higher expression of pinene synthases. Overall, the expression of all genes examined matched the expected profiles of oleoresin-related transcript changes reported for previously examined conifers. PMID:27379135

  3. Reference Genes for qPCR Analysis in Resin-Tapped Adult Slash Pine As a Tool to Address the Molecular Basis of Commercial Resinosis.

    PubMed

    de Lima, Júlio C; de Costa, Fernanda; Füller, Thanise N; Rodrigues-Corrêa, Kelly C da Silva; Kerber, Magnus R; Lima, Mariano S; Fett, Janette P; Fett-Neto, Arthur G

    2016-01-01

    Pine oleoresin is a major source of terpenes, consisting of turpentine (mono- and sesquiterpenes) and rosin (diterpenes) fractions. Higher oleoresin yields are of economic interest, since oleoresin derivatives make up a valuable source of materials for chemical industries. Oleoresin can be extracted from living trees, often by the bark streak method, in which bark removal is done periodically, followed by application of stimulant paste containing sulfuric acid and other chemicals on the freshly wounded exposed surface. To better understand the molecular basis of chemically-stimulated and wound induced oleoresin production, we evaluated the stability of 11 putative reference genes for the purpose of normalization in studying Pinus elliottii gene expression during oleoresinosis. Samples for RNA extraction were collected from field-grown adult trees under tapping operations using stimulant pastes with different compositions and at various time points after paste application. Statistical methods established by geNorm, NormFinder, and BestKeeper softwares were consistent in pointing as adequate reference genes HISTO3 and UBI. To confirm expression stability of the candidate reference genes, expression profiles of putative P. elliottii orthologs of resin biosynthesis-related genes encoding Pinus contorta β-pinene synthase [PcTPS-(-)β-pin1], P. contorta levopimaradiene/abietadiene synthase (PcLAS1), Pinus taeda α-pinene synthase [PtTPS-(+)αpin], and P. taeda α-farnesene synthase (PtαFS) were examined following stimulant paste application. Increased oleoresin yields observed in stimulated treatments using phytohormone-based pastes were consistent with higher expression of pinene synthases. Overall, the expression of all genes examined matched the expected profiles of oleoresin-related transcript changes reported for previously examined conifers.

  4. Experimental observations of pressure oscillations and flow regimes in an analogue volcanic system

    USGS Publications Warehouse

    Lane, S.J.; Chouet, B.A.; Phillips, J.C.; Dawson, P.; Ryan, G.A.; Hurst, E.

    2001-01-01

    Gas-liquid flows, designed to be analogous to those in volcanic conduits, are generated in the laboratory using organic gas-gum rosin mixtures expanding in a vertically mounted tube. The expanding fluid shows a range of both flow and pressure oscillation behaviors. Weakly supersaturated source liquids produce a low Reynolds number flow with foam expanding from the top surface of a liquid that exhibits zero fluid velocity at the tube wall; i.e., the conventional "no-slip" boundary condition. Pressure oscillations, often with strong long-period characteristics and consistent with longitudinal and radial resonant oscillation modes, are detected in these fluids. Strongly supersaturated source liquids generate more energetic flows that display a number of flow regimes. These regimes include a static liquid source, viscous flow, detached flow (comprising gas-pockets-at-wall and foam-in-gas annular flow, therefore demonstrating strong radial heterogeneity), and a fully turbulent transonic fragmented or mist flow. Each of these flow regimes displays characteristic pressure oscillations that can be related to resonance of flow features or wall impact phenomena. The pressure oscillations are produced by the degassing processes without the need of elastic coupling to the confining medium or flow restrictors and valvelike features. The oscillatory behavior of the experimental flows is compared to seismoacoustic data from a range of volcanoes where resonant oscillation of the fluid within the conduit is also often invoked as controlling the observed oscillation frequencies. On the basis of the experimental data we postulate on the nature of seismic signals that may be measured during large-scale explosive activity. Copyright 2001 by the American Geophysical Union.

  5. Study on Sumbawa gold ore liberation using rod mill: effect of rod-number and rotational speed on particle size distribution

    NASA Astrophysics Data System (ADS)

    Prasetya, A.; Mawadati, A.; Putri, A. M. R.; Petrus, H. T. B. M.

    2018-01-01

    Comminution is one of crucial steps in gold ore processing used to liberate the valuable minerals from gaunge mineral. This research is done to find the particle size distribution of gold ore after it has been treated through the comminution process in a rod mill with various number of rod and rotational speed that will results in one optimum milling condition. For the initial step, Sumbawa gold ore was crushed and then sieved to pass the 2.5 mesh and retained on the 5 mesh (this condition was taken to mimic real application in artisanal gold mining). Inserting the prepared sample into the rod mill, the observation on effect of rod-number and rotational speed was then conducted by variating the rod number of 7 and 10 while the rotational speed was varied from 60, 85, and 110 rpm. In order to be able to provide estimation on particle distribution of every condition, the comminution kinetic was applied by taking sample at 15, 30, 60, and 120 minutes for size distribution analysis. The change of particle distribution of top and bottom product as time series was then treated using Rosin-Rammler distribution equation. The result shows that the homogenity of particle size and particle size distribution is affected by rod-number and rotational speed. The particle size distribution is more homogeneous by increasing of milling time, regardless of rod-number and rotational speed. Mean size of particles do not change significantly after 60 minutes milling time. Experimental results showed that the optimum condition was achieved at rotational speed of 85 rpm, using rod-number of 7.

  6. Experimental measurement of cooling tower emissions using image processing of sensitive papers

    NASA Astrophysics Data System (ADS)

    Ruiz, J.; Kaiser, A. S.; Ballesta, M.; Gil, A.; Lucas, M.

    2013-04-01

    Cooling tower emissions are harmful for several reasons such as air polluting, wetting, icing and solid particle deposition, but mainly due to human health hazards (i.e. Legionella). There are several methods for measuring drift drops. This paper is focussed on the sensitive paper technique, which is suitable in low drift scenarios and real conditions. The lack of an automatic classification method motivated the development of a digital image process algorithm for the Sensitive Paper method. This paper presents a detailed description of this method, in which, drop-like elements are identified by means of the Canny edge detector combined with some morphological operations. Afterwards, the application of a J48 decision tree is proposed as one of the most relevant contributions. This classification method allows us to discern between stains whose origin is a drop and stains whose origin is not a drop. The method is applied to a real case and results are presented in terms of drift and PM10 emissions. This involves the calculation of the main features of the droplet distribution at the cooling tower exit surface in terms of drop size distribution data, cumulative mass distribution curve and characteristic drop diameters. The Log-normal and the Rosin-Rammler distribution functions have been fitted to the experimental data collected in the tests and it can been concluded that the first one is the most suitable for experimental data among the functions tested (whereas the second one is less suitable). Realistic PM10 calculations include the measurement of drift emissions and Total Dissolved Solids as well as the size and number of drops. Results are compared to the method proposed by the U.S. Environmental Protection Agency assessing its overestimation. Drift emissions have found to be 0.0517% of the recirculating water, which is over the Spanish standards limit (0.05%).

  7. The neural exploitation hypothesis and its implications for an embodied approach to language and cognition: Insights from the study of action verbs processing and motor disorders in Parkinson's disease.

    PubMed

    Gallese, Vittorio; Cuccio, Valentina

    2018-03-01

    As it is widely known, Parkinson's disease is clinically characterized by motor disorders such as the loss of voluntary movement control, including resting tremor, postural instability, and bradykinesia (Bocanegra et al., 2015; Helmich, Hallett, Deuschl, Toni, & Bloem, 2012; Liu et al., 2006; Rosin, Topka, & Dichgans, 1997). In the last years, many empirical studies (e.g., Bocanegra et al., 2015; Spadacenta et al., 2012) have also shown that the processing of action verbs is selectively impaired in patients affected by this neurodegenerative disorder. In the light of these findings, it has been suggested that Parkinson disorder can be interpreted within an embodied cognition framework (e.g., Bocanegra et al., 2015). The central tenet of any embodied approach to language and cognition is that high order cognitive functions are grounded in the sensory-motor system. With regard to this point, Gallese (2008) proposed the neural exploitation hypothesis to account for, at the phylogenetic level, how key aspects of human language are underpinned by brain mechanisms originally evolved for sensory-motor integration. Glenberg and Gallese (2012) also applied the neural exploitation hypothesis to the ontogenetic level. On the basis of these premises, they developed a theory of language acquisition according to which, sensory-motor mechanisms provide a neurofunctional architecture for the acquisition of language, while retaining their original functions as well. The neural exploitation hypothesis is here applied to interpret the profile of patients affected by Parkinson's disease. It is suggested that action semantic impairments directly tap onto motor disorders. Finally, a discussion of what theory of language is needed to account for the interactions between language and movement disorders is presented. Copyright © 2018 Elsevier Ltd. All rights reserved.

  8. From lapis lazuli to ultramarine blue: investigating Cennino Cennini’s recipe using sulfur K-edge XANES

    DOE PAGES

    Ganio, Monica; Pouyet, Emeline S.; Webb, Samuel M.; ...

    2017-09-22

    As one of the most desired and expensive artists’ materials throughout history, there has long been interest in studying natural lapis lazuli. The traditional method of extracting the blue component, lazurite, from lapis lazuli, as outlined in Cennini’s Il Libro dell’Arte, involves a lengthy purification process: (1) finely grind the rock; (2) mix with pine rosin, gum mastic, and beeswax; (3) massage in water to collect the lazurite. Repeating the process produces several grades of the pigment, typically referred to as ultramarine blue. Here, we investigate the sulfur environment within the aluminosilicate framework of lazurite during its extraction from lapismore » lazuli. The sulfur XANES fingerprint from samples taken at the different stages in Cennini’s extraction method were examined. All spectra contain a strong absorption peak at 2483 eV, attributable to sulfate present in the lazurite structure. However, intensity variations appear in the broad envelope of peaks between 2470 and 2475 eV and the pre-peak at 2469.1 eV, indicating a variation in the content of trisulfur (S 3 –˙) radicals. By studying the effect of each step of Cennini’s process, this study elucidates the changes occurring during the extraction and the variability within different grades of the precious coloring material. The increasing application of XANES to the study of artist’s materials and works of art motivated extending the research to assess the possibility of X-ray induced damage. Direct comparison of micro-focused and unfocused beam experiments suggests an increase of the S 3 –˙ radicals with prolonged exposure. Furthermore, analysis indicates that induced damage follows first-order kinetics, providing a first assessment on the acceptable amount of radiation exposure to define the optimal acquisition parameters to allow safe analyses of lapis lazuli and ultramarine pigments.« less

  9. From lapis lazuli to ultramarine blue: investigating Cennino Cennini’s recipe using sulfur K-edge XANES

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ganio, Monica; Pouyet, Emeline S.; Webb, Samuel M.

    As one of the most desired and expensive artists’ materials throughout history, there has long been interest in studying natural lapis lazuli. The traditional method of extracting the blue component, lazurite, from lapis lazuli, as outlined in Cennini’s Il Libro dell’Arte, involves a lengthy purification process: (1) finely grind the rock; (2) mix with pine rosin, gum mastic, and beeswax; (3) massage in water to collect the lazurite. Repeating the process produces several grades of the pigment, typically referred to as ultramarine blue. Here, we investigate the sulfur environment within the aluminosilicate framework of lazurite during its extraction from lapismore » lazuli. The sulfur XANES fingerprint from samples taken at the different stages in Cennini’s extraction method were examined. All spectra contain a strong absorption peak at 2483 eV, attributable to sulfate present in the lazurite structure. However, intensity variations appear in the broad envelope of peaks between 2470 and 2475 eV and the pre-peak at 2469.1 eV, indicating a variation in the content of trisulfur (S 3 –˙) radicals. By studying the effect of each step of Cennini’s process, this study elucidates the changes occurring during the extraction and the variability within different grades of the precious coloring material. The increasing application of XANES to the study of artist’s materials and works of art motivated extending the research to assess the possibility of X-ray induced damage. Direct comparison of micro-focused and unfocused beam experiments suggests an increase of the S 3 –˙ radicals with prolonged exposure. Furthermore, analysis indicates that induced damage follows first-order kinetics, providing a first assessment on the acceptable amount of radiation exposure to define the optimal acquisition parameters to allow safe analyses of lapis lazuli and ultramarine pigments.« less

  10. CFD simulation of the combustion process of the low-emission vortex boiler

    NASA Astrophysics Data System (ADS)

    Chernov, A. A.; Maryandyshev, P. A.; Pankratov, E. V.; Lubov, V. K.

    2017-11-01

    Domestic heat and power engineering needs means and methods for optimizing the existing boiler plants in order to increase their technical, economic and environmental work. The development of modern computer technology, methods of numerical modeling and specialized software greatly facilitates the solution of many emerging problems. CFD simulation allows to obtaine precise results of thermochemical and aerodynamic processes taking place in the furnace of boilers in order to optimize their operation modes and develop directions for their modernization. The paper presents the results of simulation of the combustion process of a low-emission vortex coal boiler of the model E-220/100 using the software package Ansys Fluent. A hexahedral grid with a number of 2 million cells was constructed for the chosen boiler model. A stationary problem with a two-phase flow was solved. The gaseous components are air, combustion products and volatile substances. The solid phase is coal particles at different burnup stages. The Euler-Lagrange approach was taken as a basis. Calculation of the coal particles trajectories was carried out using the Discrete Phase Model which distribution of the size particle of coal dust was accounted for using the Rosin-Rammler equation. Partially Premixed combustion model was used as the combustion model which take into account elemental composition of the fuel and heat analysis. To take turbulence into account, a two-parameter k-ε model with a standard wall function was chosen. Heat transfer by radiation was calculated using the P1-approximation of the method of spherical harmonics. The system of spatial equations was numerically solved by the control volume method using the SIMPLE algorithm of Patankar and Spaulding. Comparison of data obtained during the industrial-operational tests of low-emission vortex boilers with the results of mathematical modeling showed acceptable convergence of the tasks of this level, which confirms the adequacy of the

  11. Liquid Adhesive Contact Dermatitis After Bunionectomy: A Case Report and Literature Review.

    PubMed

    Hood, Christopher R; Cornell, Rhonda S; Greenfield, Bruce

    2016-01-01

    Hypersensitivity reactions to the skin adherents used in postoperative dressings are an uncommon but unfavorable complication that can result in poor wound healing, increased scarring, and surgical wound infections. This unexpected and unforeseen complication is not well documented in the current published data. We present the case of a 39-year-old female who had undergone a bunionectomy procedure and developed allergic contact dermatitis postoperatively. We discuss the clinical findings and treatments administered after application of a commonly used liquid skin adhesive applied intraoperatively. Through the use of topical and oral steroids and foot soaks in astringent solutions, over the course of several months, the patient's skin returned to the expected postoperative appearance. With the increased consciousness to minimize surgical scarring to improve cosmesis, one of these causes of the reaction might have been the liquid adhesive used in the surgical closure and dressing application. Therefore, we additionally reviewed the adhesive compound's chemical makeup and any potential cross-reactivity to help surgeons make an informed decision of whether to use a liquid adhesive. The various ingredients in liquid adhesives contain known allergen compounds that can cause a reaction, such as balsam of Peru and colophony or rosin, both of which are reviewed in our report. We also present a treatment algorithm developed from the compiled data in the case of a patient developing an allergic reaction. From our literature review and considering the percentage of incidence, if a surgeon desires to use a liquid adhesive product, Mastisol(®) should be chosen because of its lower reactivity and greater adhesive properties compared with the compound tincture of benzoin. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  12. Materials compatibility and aging for flux and cleaner combinations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Archuleta, Kim M.; Piatt, Rochelle

    2015-01-01

    A materials study of high reliability electronics cleaning is presented here. In Phase 1, mixed type substrates underwent a condensed contaminants application to view a worst- case scenario for unremoved flux with cleaning agent residue for parts in a silicone oil filled environment. In Phase 2, fluxes applied to copper coupons and to printed wiring boards underwent gentle cleaning then accelerated aging in air at 65% humidity and 30 O C. Both sets were aged for 4 weeks. Contaminants were no-clean (ORL0), water soluble (ORH1 liquid and ORH0 paste), and rosin (RMA; ROL0) fluxes. Defluxing agents were water, solvents, andmore » engineered aqueous defluxers. In the first phase, coupons had flux applied and heated, then were placed in vials of oil with a small amount of cleaning agent and additional coupons. In the second phase, pairs of copper coupons and PWB were hand soldered by application of each flux, using tin-lead solder in a strip across the coupon or a set of test components on the PWB. One of each pair was cleaned in each cleaning agent, the first with a typical clean, and the second with a brief clean. Ionic contamination residue was measured before accelerated aging. After aging, substrates were removed and a visual record of coupon damage made, from which a subjective rank was applied for comparison between the various flux and defluxer combinations; more corrosion equated to higher rank. The ORH1 water soluble flux resulted in the highest ranking in both phases, the RMA flux the least. For the first phase, in which flux and defluxer remained on coupons, the aqueous defluxers led to worse corrosion. The vapor phase cleaning agents resulted in the highest ranking in the second phase, in which there was no physical cleaning. Further study of cleaning and rinsing parameters will be required.« less

  13. The Evolution of Grain Size Distribution in Explosive Rock Fragmentation - Sequential Fragmentation Theory Revisited

    NASA Astrophysics Data System (ADS)

    Scheu, B.; Fowler, A. C.

    2015-12-01

    Fragmentation is a ubiquitous phenomenon in many natural and engineering systems. It is the process by which an initially competent medium, solid or liquid, is broken up into a population of constituents. Examples occur in collisions and impacts of asteroids/meteorites, explosion driven fragmentation of munitions on a battlefield, as well as of magma in a volcanic conduit causing explosive volcanic eruptions and break-up of liquid drops. Besides the mechanism of fragmentation the resulting frequency-size distribution of the generated constituents is of central interest. Initially their distributions were fitted empirically using lognormal, Rosin-Rammler and Weibull distributions (e.g. Brown & Wohletz 1995). The sequential fragmentation theory (Brown 1989, Wohletz at al. 1989, Wohletz & Brown 1995) and the application of fractal theory to fragmentation products (Turcotte 1986, Perfect 1997, Perugini & Kueppers 2012) attempt to overcome this shortcoming by providing a more physical basis for the applied distribution. Both rely on an at least partially scale-invariant and thus self-similar random fragmentation process. Here we provide a stochastic model for the evolution of grain size distribution during the explosion process. Our model is based on laboratory experiments in which volcanic rock samples explode naturally when rapidly depressurized from initial pressures of several MPa to ambient conditions. The physics governing this fragmentation process has been successfully modelled and the observed fragmentation pattern could be numerically reproduced (Fowler et al. 2010). The fragmentation of these natural rocks leads to grain size distributions which vary depending on the experimental starting conditions. Our model provides a theoretical description of these different grain size distributions. Our model combines a sequential model of the type outlined by Turcotte (1986), but generalized to cater for the explosive process appropriate here, in particular by

  14. Design and preparation of plant oil-based polymers and their applications

    NASA Astrophysics Data System (ADS)

    Ahn, Byung-Jun Kollbe

    Renewable materials are desirable for many applications due to the finite fossil resources and environmental issues. Plant oil is one of the most promising renewable feedstocks. Plant oils and functionalized oleo-chemicals including functionalized soybean oils have become attractive sustainable chemicals for industrial applications. Especially, epoxidized oleo-chemicals such as epoxidized soybean oil (ESO) are one of the most well-known readily available inexpensive functionalized plant oils. In this study, novel polymers and nanocomposites for sustainable materials applications were designed and prepared via ring-opening of epoxide in plant oils, and their chemical and physical properties were characterized. The novel transparent elastomers derived from functionalized plant oils have a great potential as flexible electronic and biological applications with their inherent low toxicity. Especially, their rheological properties showed a potential for pressure sensitive adhesives (PSAs). The dominant thermal stability and transparency were obtained via green processing: one pot, single step, fast reactions in moderate conditions, or solvent-free UV curing conditions. These oleo-based elastomers presented excellent end-use properties for PSAs application comparable to commercial PSA tapes. Based on the principal chemical studies, the roles of the each component have been identified: polymer derived from the ring-opening of epoxides as an elastomer, and dihydroxylated triglycerides as a tackifier. Their interaction was also elucidated with an element label analysis. The mechanical and rheological properties of the oleo-polymer as PSAs were able to be improved with a rosin ester tackifier. In addition, biogreases and bio-thermoplastics were developed via the environmentally benign process, which will contribute to further application on the production of new bio-based materials. Further, this study essays a novel acid functionalized iron/iron oxide nanoparticles catalyst

  15. Progression of hydroxychloroquine toxic effects after drug therapy cessation: new evidence from multimodal imaging.

    PubMed

    Mititelu, Mihai; Wong, Brandon J; Brenner, Marie; Bryar, Paul J; Jampol, Lee M; Fawzi, Amani A

    2013-09-01

    Given the infrequent occurrence of hydroxychloroquine toxic effects, few data are available about the presenting features and long-term follow-up of patients with hydroxychloroquine retinopathy, making it difficult to surmise the clinical course of patients after cessation of drug treatment. To report functional and structural findings of hydroxychloroquine retinal toxic effects after drug therapy discontinuation. A retrospective medical record review was performed to identify patients taking hydroxychloroquine who were screened for toxic effects from January 1, 2009, through August 31, 2012, in the eye centers of Northwestern University and the University of Southern California. Northwestern University Sorrel Rosin Eye Center, Chicago, Illinois, and the Doheny Eye Institute at the University of Southern California, Los Angeles. Seven consecutive patients diagnosed as having hydroxychloroquine retinal toxic effects. Retinal toxic effects. Seven patients (1 man and 6 women) with a mean age of 55.9 years (age range, 25-74 years) developed retinal toxic effects after using hydroxychloroquine for a mean of 10.4 years (range, 3-19 years). Fundus examination revealed macular pigmentary changes in all 7 patients, corresponding to abnormal fundus autofluorescence (FAF). On spectral domain optical coherence tomography, there was outer retinal foveal resistance (preservation of the external limiting membrane and the photoreceptor layer) in 6 patients. After drug therapy discontinuation, 5 patients experienced outer retinal regeneration (3 subfoveally and 2 parafoveally), with associated functional visual improvement on static perimetry in 2 patients. Over time, FAF remained stable in 3 patients, whereas the remaining patients had a pattern of hypoautofluorescence that replaced areas of initial hyperautofluorescence (2 patients) and enlargement of the total area of abnormal FAF (2 patients). Preservation of the external limiting membrane carries a positive prognostic value in

  16. A New 4D Imaging Method for Three-Phase Analogue Experiments in Volcanology (and Other Three-Phase Systems)

    NASA Astrophysics Data System (ADS)

    Oppenheimer, J.; Patel, K. B.; Lev, E.; Hillman, E. M. C.

    2017-12-01

    Bubbles and crystals suspended in magmas interact with each other on a small scale, which affects large-scale volcanic processes. Studying these interactions on relevant scales of time and space is a long-standing challenge. Therefore, the fundamental explanations for the behavior of bubble- and crystal-rich magmas are still largely speculative. Recent application of X-ray tomography to experiments with synthetic magmas has already improved our understanding of small-scale 4D (3D + time) phenomena. However, this technique has low imaging rates < 20 volumes per second (vps) and does not work well with analogues, making experiments costly and slow. We demonstrate a novel methodology for imaging bubble-particle interactions in analogue suspensions by utilizing Swept Confocally Aligned Planar Excitation (SCAPE) microscopy. This method based on laser-fluorescence has been used to image live biological processes at high speed and in 3D. It allows imaging rates of up to several hundred vps and image volumes up to 1 x 1 x 0.5 mm3, with a trade-off between speed and spatial resolution. We ran two sets of experiments with silicone oil and soda-lime glass beads of <50 µm diameter, contained within a vertical glass casing 50 x 5 x 4 mm3. We used two different bubble generation methods. In the first set of experiments, small air bubbles (< 1 mm) were introduced through a hole at the bottom of the sample and allowed to rise through a suspension with low-viscosity oil. We successfully imaged bubble rise and particle movements around the bubble. In the second set, bubbles were generated by mixing acetone into the suspension and decreasing the surface pressure to cause a phase change to gaseous acetone. This bubble generation method compared favorably with previous gum rosin-acetone experiments: they provided similar degassing behaviors, along with more control on suspension viscosity and optimal optical properties for laser transmission. Large volumes of suspended bubbles

  17. NASA Numerical and Experimental Evaluation of UTRC Low Emissions Injector

    NASA Technical Reports Server (NTRS)

    Hicks, Yolanda R.; Tedder, Sarah A.; Anderson, Robert C.; Iannetti, Anthony C.; Smith, Lance L.; Dai, Zhongtao

    2014-01-01

    Computational and experimental analyses of a PICS-Pilot-In-Can-Swirler technology injector, developed by United Technologies Research Center (UTRC) are presented. NASA has defined technology targets for near term (called "N+1", circa 2015), midterm ("N+2", circa 2020) and far term ("N+3", circa 2030) that specify realistic emissions and fuel efficiency goals for commercial aircraft. This injector has potential for application in an engine to meet the Pratt & Whitney N+3 supersonic cycle goals, or the subsonic N+2 engine cycle goals. Experimental methods were employed to investigate supersonic cruise points as well as select points of the subsonic cycle engine; cruise, approach, and idle with a slightly elevated inlet pressure. Experiments at NASA employed gas analysis and a suite of laser-based measurement techniques to characterize the combustor flow downstream from the PICS dump plane. Optical diagnostics employed for this work included Planar Laser-Induced Fluorescence of fuel for injector spray pattern and Spontaneous Raman Spectroscopy for relative species concentration of fuel and CO2. The work reported here used unheated (liquid) Jet-A fuel for all fuel circuits and cycle conditions. The initial tests performed by UTRC used vaporized Jet-A to simulate the expected supersonic cruise condition, which anticipated using fuel as a heat sink. Using the National Combustion Code a PICS-based combustor was modeled with liquid fuel at the supersonic cruise condition. All CFD models used a cubic non-linear k-epsilon turbulence wall functions model, and a semi-detailed Jet-A kinetic mechanism based on a surrogate fuel mixture. Two initial spray droplet size distribution and spray cone conditions were used: 1) an initial condition (Lefebvre) with an assumed Rosin-Rammler distribution, and 7 degree Solid Spray Cone; and 2) the Boundary Layer Stripping (BLS) primary atomization model giving the spray size distribution and directional properties. Contour and line plots are

  18. NASA Numerical and Experimental Evaluation of UTRC Low Emissions Injector

    NASA Technical Reports Server (NTRS)

    Hicks, Yolanda R.; Tedder, Sarah A.; Anderson, Robert C.; Iannetti, Anthony C.; Smith, Lance L.; Dai, Zhongtao

    2014-01-01

    Computational and experimental analyses of a PICS-Pilot-In-Can-Swirler technology injector, developed by United Technologies Research Center (UTRC) are presented. NASA has defined technology targets for near term (called "N+1", circa 2015), midterm ("N+2", circa 2020) and far term ("N+3", circa 2030) that specify realistic emissions and fuel efficiency goals for commercial aircraft. This injector has potential for application in an engine to meet the Pratt & Whitney N+3 supersonic cycle goals, or the subsonic N+2 engine cycle goals. Experimental methods were employed to investigate supersonic cruise points as well as select points of the subsonic cycle engine; cruise, approach, and idle with a slightly elevated inlet pressure. Experiments at NASA employed gas analysis and a suite of laser-based measurement techniques to characterize the combustor flow downstream from the PICS dump plane. Optical diagnostics employed for this work included Planar Laser-Induced Fluorescence of fuel for injector spray pattern and Spontaneous Raman Spectroscopy for relative species concentration of fuel and CO2. The work reported here used unheated (liquid) Jet-A fuel for all fuel circuits and cycle conditions. The initial tests performed by UTRC used vaporized Jet-A to simulate the expected supersonic cruise condition, which anticipated using fuel as a heat sink. Using the National Combustion Code a PICS-based combustor was modeled with liquid fuel at the supersonic cruise condition. All CFD models used a cubic non-linear k-epsilon turbulence wall functions model, and a semi-detailed Jet-A kinetic mechanism based on a surrogate fuel mixture. Two initial spray droplet size distribution and spray cone conditions were used: (1) an initial condition (Lefebvre) with an assumed Rosin-Rammler distribution, and 7 degree Solid Spray Cone; and (2) the Boundary Layer Stripping (BLS) primary atomization model giving the spray size distribution and directional properties. Contour and line plots

  19. [Epidemiology of contact dermatitis: prevalence of sensitization to different allergens and associated factors].

    PubMed

    Bordel-Gómez, Ma T; Miranda-Romero, A; Castrodeza-Sanz, J

    2010-01-01

    general. Women became sensitized at a younger age than men, and the frequency of positive results in the patch tests increased with age, reaching a maximum at between 60 and 69 years of age, when the greatest rate of sensitization occurred. Comparison of our results with other Spanish data showed a progressive and constant increase in sensitization to nickel sulfate, fragrance blends, balsam of Peru, and rosin, and a decrease in sensitization to potassium dichromate. The inclusion of new allergens such as palladium chloride, diallyl disulfide, and p-toluene sulfonamide formaldehyde improved the sensitivity of the standard battery in the detection of contact sensitization. We therefore recommend further studies of these allergens.

  20. Constructing kidney-like tissues from cells based on programs for organ development: toward a method of in vitro tissue engineering of the kidney.

    PubMed

    Rosines, Eran; Johkura, Kohei; Zhang, Xing; Schmidt, Heidi J; Decambre, Marvalyn; Bush, Kevin T; Nigam, Sanjay K

    2010-08-01

    engineering approach. To identify suitable conditions, 3D reconstructions of HoxB7-green fluorescent protein mouse rudiments (E12) cultured on a filter or suspended in a collagen gel (type I or type IV) revealed that type IV collagen 3D culture supports the deepest tissue growth (600 +/- 8 microm) and the largest kidney volume (0.22 +/- 0.02 mm(3)), and enabled the development of an umbrella-shaped collecting system such as occurs in vivo. Taken together with prior work (Rosines et al., 2007; Steer et al., 2002), these results support the plausibility of a developmental strategy for constructing and propagating vascularized 3D kidney-like tissues from recombinations of cultured renal progenitor cells and/or primordial tissue.

  1. Experimental evidence for intraplate deformation controlled by netlike plastic-flow in central-eastern Asia

    NASA Astrophysics Data System (ADS)

    Wang, Sheng-zu; Li, Jian-guo; Zhou, Yong-sheng

    2007-12-01

    The experimental results of brittle/ductile two-layer analogue models verify that intraplate tectonic deformation in central-eastern Asia is controlled mainly by the netlike plastic-flow (NPF) occurring in the lower lithosphere, including the lower crust and lithospheric mantle. The ductile lower layer in the model, corresponding to the lower lithosphere in the natural prototype, is made of a mixture of gum rosin and turpentine oil and the brittle upper one, to the upper crust, is formed by the consolidation of talc-powder slurry. The NPF hypothesis for continental dynamics can be regarded as a combination and development of two kinds of seemingly mutually exclusive ones, which are based on the theories of slip-line field and viscous (plastic) flow, respectively. In contrast to "homogeneous" viscous (plastic) flow considered usually in fluid mechanics and rheology, NPF is a viscous (plastic) flow accompanied with shear strain localization, forming plastic-flow network in the flow field. Plastic-flow network, being composed of two families of plastic-flow belts intersecting each other with their initial conjugate angles (i.e. the included angles facing the compression direction) equal to 90°, is similar to but different from the traditional slip-line network, which is assumed as a critical state of yield in elastoplastic medium. The experiments show that there are several NPF-controlled tectonic network systems to be developed in the models and two of them correspond to those in central-eastern Asia, which have the Himalayan and Taiwan arcs as their driving boundaries, respectively. The existence of "stable blocks" in the ductile lower layer has promoted some types of tectonic deformation, including the formation of large-scale compressional basins, corresponding to the Tarim, Ordos, Sichuan basins, etc., the development of compression-shear tectonic zones between some of these basins, corresponding to those shown by the Tianshan and Altay mountain ranges, and the

  2. Heavy-metal-induced reactive oxygen species: phytotoxicity and physicochemical changes in plants.

    PubMed

    Shahid, Muhammad; Pourrut, Bertrand; Dumat, Camille; Nadeem, Muhammad; Aslam, Muhammad; Pinelli, Eric

    2014-01-01

    biomolecules. Heavy-metal-induced ROS cause lipid peroxidation, membrane dismantling and damage to DNA, protein and carbohydrates. Plants have very well-organized defense systems, consisting of enzymatic and non-enzymatic antioxidation processes. The primary defense mechanism for heavy metal detoxification is the reduced absorption of these metals into plants or their sequestration in root cells.Secondary heavy metal tolerance mechanisms include activation of antioxidant enzymes and the binding of heavy metals by phytochelatins, glutathione and amino acids. These defense systems work in combination to manage the cascades of oxidative stress and to defend plant cells from the toxic effects of ROS.In this review, we summarized the biochemiCal processes involved in the over production of ROS as an aftermath to heavy metal exposure. We also described the ROS scavenging process that is associated with the antioxidant defense machinery.Despite considerable progress in understanding the biochemistry of ROS overproduction and scavenging, we still lack in-depth studies on the parameters associated with heavy metal exclusion and tolerance capacity of plants. For example, data about the role of glutathione-glutaredoxin-thioredoxin system in ROS detoxification in plant cells are scarce. Moreover, how ROS mediate glutathionylation (redox signalling)is still not completely understood. Similarly, induction of glutathione and phytochelatins under oxidative stress is very well reported, but it is still unexplained that some studied compounds are not involved in the detoxification mechanisms. Moreover,although the role of metal transporters and gene expression is well established for a few metals and plants, much more research is needed. Eventually, when results for more metals and plants are available, the mechanism of the biochemical and genetic basis of heavy metal detoxification in plants will be better understood. Moreover, by using recently developed genetic and biotechnological tools it

  3. PREFACE: Ultrathin layers of graphene, h-BN and other honeycomb structures Ultrathin layers of graphene, h-BN and other honeycomb structures

    NASA Astrophysics Data System (ADS)

    Geber, Thomas; Oshima, Chuhei

    2012-08-01

    Kusunoki Mechanical exfoliation of epitaxial graphene on Ir(111) enabled by Br2 intercalationCharlotte Herbig, Markus Kaiser, Nedjma Bendiab, Stefan Schumacher, Daniel F Förster, Johann Coraux, Klaus Meerholz, Thomas Michely and Carsten Busse Low energy electron microscopy and photoemission electron microscopy investigation of grapheneK L Man and M S Altman Periodic overlayers and moiré patterns: theoretical studies of geometric propertiesKlaus Hermann Silicene structures on silver surfacesHanna Enriquez, Sébastien Vizzini, Abdelkader Kara, Boubekeur Lalmi and Hamid Oughaddou Contrast inversion of the h-BN nanomesh investigated by nc-AFM and Kelvin probe force microscopyS Koch, M Langer, S Kawai, E Meyer and Th Glatzel Probing the electronic structure and optical response of a graphene quantum disk supported on monolayer grapheneWu Zhou, Stephen J Pennycook and Juan-Carlos Idrobo Multi-oriented moiré superstructures of graphene on Ir(111): experimental observations and theoretical modelsLei Meng, Rongting Wu, Lizhi Zhang, Linfei Li, Shixuan Du, Yeliang Wang and H-J Gao The physics of epitaxial graphene on SiC(0001)H Kageshima, H Hibino and S Tanabe

  4. EDITORIAL: From reciprocal space to real space in surface science From reciprocal space to real space in surface science

    NASA Astrophysics Data System (ADS)

    Bartels, Ludwig; Ernst, Karl-Heinz

    2012-09-01

    Triest.let's finish—aus basta Some move atoms around to hear how they sound.Karl-Heinz Rieder, Erice, 6 April 1998 From reciprocal space to real space in surface science contents From reciprocal space to real space in surface scienceLudwig Bartels and Karl-Heinz Ernst Karl-Heinz Reider: the quiet pioneerGiorgio Benedek Scattering of CO and N2 molecules by a graphite surfaceJunepyo Oh, Takahiro Kondo, Keitaro Arakawa, Yoshihiko Saito, Junji Nakamura, W W Hayes and J R Manson Helium, neon and argon diffraction from Ru(0001)M Minniti, C Díaz, J L Fernández Cuñado, A Politano, D Maccariello, F Martín, D Farías and R Miranda Enhanced charge transfer in a monolayer of the organic charge transfer complex TTF-TNAP on Au(111)T R Umbach, I Fernandez-Torrente, J N Ladenthin, J I Pascual and K J Franke Extended pattern recognition scheme for self-learning kinetic Monte Carlo simulationsSyed Islamuddin Shah, Giridhar Nandipati, Abdelkader Kara and Talat S Rahman Acetylene on Cu(111): imaging a molecular surface arrangement with a constantly rearranging tipYeming Zhu, Jonathan Wyrick, Kamelia D Cohen, Katie Marie Magnone, Connor Holzke, Daniel Salib, Quan Ma, Dezheng Sun and Ludwig Bartels Coulomb attraction during the carpet growth mode of NaClFriederike Matthaei, Sarah Heidorn, Konrad Boom, Cord Bertram, Ali Safiei, Jörg Henzl and Karina Morgenstern Molecular self-assembly on an insulating surface: interplay between substrate templating and intermolecular interactionsMarkus Kittelmann, Philipp Rahe and Angelika Kühnle Vertical manipulation of native adatoms on the InAs(111)A surfaceJ Yang, C Nacci, J Martínez-Blanco, K Kanisawa and S Fölsch Charge transfer between isomer domains on n+-doped Si(111)-2 × 1: energetic stabilizationR M Feenstra, G Bussetti, B Bonanni, A Violante, C Goletti, P Chiaradia, M G Betti and C Mariani Probing the properties of metal-oxide interfaces: silica films on Mo and Ru supportsLeonid Lichtenstein, Markus Heyde, Stefan Ulrich, Niklas Nilius

  5. EDITORIAL: Special issue on applied neurodynamics: from neural dynamics to neural engineering Special issue on applied neurodynamics: from neural dynamics to neural engineering

    NASA Astrophysics Data System (ADS)

    Chiel, Hillel J.; Thomas, Peter J.

    2011-12-01

    Parkinson's disease (PD) are believed to involve atypical synchronized activity in populations of neurons in regions such as the subthalamic nucleus within the basal ganglia (Hauptmann and Tass 2010, Rosin et al 2007). Remediation of PD symptoms via deep brain stimulation (DBS) is limited in that it can only 'force' the system in a small number of independently tunable directions. How can one most effectively desynchronize a high-dimensional dynamical system using an input that is limited to a much smaller dimension? To make things worse, the details of the system for any given patient—number, connectivity and physiology of the neurons involved—are largely unknown. Nabi and Moehlis (2011) take a step toward addressing these issues by considering optimal desynchronizing control for a simple system that retains essential elements of the problem: given three coupled oscillators with a tendency to synchronize (that is, a globally attracting stable synchronized state), and a control signal that can only be applied to one of the oscillators, what is the optimal desynchronizing control signal under a quadratic control penalty? Put another way, with how light a touch is it possible to bring the oscillators away from their preferred synchronized state by a given amount? The answer depends in part on the form taken by the coupling between the cells. For instance, if the coupling between the stimulated cell and the others is identical, then from symmetry one can see that no desynchronizing control signal exists (at least, if the cells are identical). Encouragingly, for reasonable control stimuli, the authors find that control signals of modest size can effectively desynchronize the population for a large fraction of possible couplings. The ninth paper addresses one of the most ambitious areas within neural engineering: the application of control theoretic techniques to dynamics of circuits in the central nervous system. Control of high-dimensional systems (often accessed through

  6. NARRATIVE: A short history of my life in science A short history of my life in science

    NASA Astrophysics Data System (ADS)

    Manson, Joseph R.

    2010-08-01

    beams of helium atoms from surfaces under clean high-vacuum conditions. This sabbatical was the beginning of a very fruitful and extremely pleasant collaboration working on a large variety of problems on the structure and dynamics of metal surfaces as elucidated by helium atom scattering, a collaboration that lasted until the retirements of Armand and Lapujoulade in the early 1990s. Nearly every summer and two additional sabbaticals in 1984 and 1992 were spent in this very stimulating research atmosphere located in the scientific complex on the southern edge of Paris. This period included collaborations and interactions with many of the colleagues, visitors and students at Saclay including C S Jayanthi, Abdelkader Kara, Luc Barbier, Hans-Joachim Ernst, Francoise Fabre and Bernard Salanon. Directly after this first sabbatical I spent a summer under the auspices of an Oak Ridge Associated Universities grant working with Rufus Ritchie in what was then the Health Sciences Division of the Oak Ridge National Laboratory (ORNL). Ritchie was a senior scientist at ORNL as well as a professor at the Physics Department of the University of Tennessee at nearby Knoxville. This one summer at ORNL also developed into a long and productive, as well as extremely pleasant, scientific collaboration with Ritchie that lasted into the 1990s. During the academic years at Clemson I was able to take off to ORNL for week-long periods several times a year. Our work involved calculating energy transfers in the interactions of electrons and other charged particles with surfaces, problems involving interactions of atomic and charged particles with surface plasmons and theories for developing interaction potentials between particles or between particles and surfaces. This work also had the great advantage of developing interactions and scientific collaborations with many others at ORNL, including Thomas Ferrell and Bruce Warmack. One of the advantages of being a scientist is the opportunity to travel

  7. EDITORIAL: Van der Waals interactions in advanced materials, in memory of David C Langreth Van der Waals interactions in advanced materials, in memory of David C Langreth

    NASA Astrophysics Data System (ADS)

    Hyldgaard, Per; Rahman, Talat S.

    2012-10-01

    Rahman Frictional temperature rise in a sliding physisorbed monolayer of Kr/grapheneM Walker, C Jaye, J Krim and Milton W Cole How to modify the van der Waals and Casimir forces without change of the dielectric permittivityG L Klimchitskaya, U Mohideen and V M Mostepanenko Spectroscopic characterization of van der Waals interactions in a metal organic framework with unsaturated metal centers: MOF-74-MgNour Nijem, Pieremanuele Canepa, Lingzhu Kong, Haohan Wu, Jing Li, Timo Thonhauser and Yves J Chabal A theoretical study of the hydrogen-storage potential of (H2)4CH4 in metal organic framework materials and carbon nanotubesQ Li and T Thonhauser The influence of dispersion interactions on the hydrogen adsorption properties of expanded graphiteYungok Ihm, Valentino R Cooper, Lujian Peng and James R Morris A DFT-D study of structural and energetic properties of TiO2 modificationsJonas Moellmann, Stephan Ehrlich, Ralf Tonner and Stefan Grimme Spherical-shell model for the van der Waals coefficients between fullerenes and/or nearly spherical nanoclustersJohn P Perdew, Jianmin Tao, Pan Hao, Adrienn Ruzsinszky, Gábor I Csonka and J M Pitarke Dynamical screening of the van der Waals interaction between graphene layersY J Dappe, P G Bolcatto, J Ortega and F Flores Structural evolution of amino acid crystals under stress from a non-empirical density functionalRiccardo Sabatini, Emine Küçükbenli, Brian Kolb, T Thonhauser and Stefano de Gironcoli Physisorption of nucleobases on graphene: a comparative van der Waals studyDuy Le, Abdelkader Kara, Elsebeth Schröder, Per Hyldgaard and Talat S Rahman The role of van der Waals interactions in the adsorption of noble gases on metal surfacesDe-Li Chen, W A Al-Saidi and J Karl Johnson Desorption of n-alkanes from graphene: a van der Waals density functional studyElisa Londero, Emma K Karlson, Marcus Landahl, Dimitri Ostrovskii, Jonatan D Rydberg and Elsebeth Schröder Benchmarking van der Waals density functionals with experimental data