Science.gov

Sample records for abschlussbericht teil iii

  1. ACRIM III

    Atmospheric Science Data Center

    2015-12-30

    ACRIM III Data and Information Active Cavity Radiometer Irradiance ... the ACRIMSAT spacecraft on December 20, 1999. ACRIM III data are reprocessed every 90 days to utilize instrument recalibration.   ... ACRIM III Instrument Team Page ACRIM II Data Sets SCAR-B Block:  SCAR-B Products ...

  2. SAGE III

    Atmospheric Science Data Center

    2016-06-15

    SAGE III Data and Information The Stratospheric Aerosol and Gas ... on the spacecraft. SAGE III produced L1 and L2 scientific data from 5/07/2002 until 12/31/2005. The flight of the second instrument is as ... Guide Documents:  Project Guide Data Products User's Guide  (PDF) Relevant Documents:  ...

  3. Welding III.

    ERIC Educational Resources Information Center

    Allegheny County Community Coll., Pittsburgh, PA.

    Instructional objectives and performance requirements are outlined in this course guide for Welding III, an advanced course in arc welding offered at the Community College of Allegheny County to provide students with the proficiency necessary for industrial certification. The course objectives, which are outlined first, specify that students will…

  4. LANDVIEW III

    EPA Science Inventory

    LandView III is a desktop mapping system that includes database extracts from the Environmental Protection Agency, the Bureau of the Census, The U.S. Geological Survey, the Nuclear Regulatory Commission, the Department of Transportation, and the Federal Emergency Management Agenc...

  5. Structure of the β-form of human MK2 in complex with the non-selective kinase inhibitor TEI-L03090

    PubMed Central

    Fujino, Aiko; Fukushima, Kei; Kubota, Takaharu; Matsumoto, Yoshiyuki; Takimoto-Kamimura, Midori

    2013-01-01

    Mitogen-activated protein kinase-activated protein kinase 2 (MK2 or MAPKAP-K2), a serine/threonine kinase from the p38 mitogen-activated protein kinase signalling pathway, plays an important role in the production of TNF-α and other cytokines. In a previous report, it was shown that MK2 in complex with the selective inhibitor TEI-I01800 adopts an α-helical glycine-rich loop that is induced by the stable nonplanar conformer of TEI-I01800. To understand the mechanism of the structural change, the structure of MK2 bound to TEI-L03090, which lacks the key substituent found in TEI-I01800, was determined. MK2–TEI-L03090 has a β-sheet glycine-rich loop in common with other kinases, as predicted. This result suggests that a small compound can induce a drastic conformational change in the target protein structure and can be used to design potent and selective inhibitors. PMID:24316826

  6. Dentalwerkstoffe und Dentalimplantate - Teil 2

    NASA Astrophysics Data System (ADS)

    Faltermeier, Andreas

    Wie in allen Bereichen der Medizin findet auch in der Zahnmedizin eine kontinuierliche Weiterentwicklung der verwendeten Werkstoffe statt. Gerade für Zahnersatz werden Werkstoffe gesucht, die zum einen ästhetisch, zum anderen haltbar und darüber hinaus auch körperverträglich sind. Auch steigt immer mehr der Wunsch der Patienten nach ästhetischen und zugleich biokompatiblen Materialien. Wurde früher fast ausschließlich als Füllungsmaterial im Seitenzahngebiet quecksilberhaltiges Amalgam verwendet, hat der Zahnarzt heutzutage eine große Auswahl an verschiedenen zahnfarbenen Materialien: zum einen werden sog. Komposite verwendet, das aus einer Polymermatrix mit eingebetteten Füllstoffen besteht, zum anderen können diverse Dentalkeramiken verwendet werden. Besonders die Verwendung von Hochleistungskeramiken, wie beispielsweise Zirkonoxid, das sich bereits als Bremsscheiben für Sportwägen, Hitzeschilde im Space Shuttle und als Kugelköpfe künstlicher Hüftgelenke bewährt hat, spielt heutzutage eine große Rolle bei der Verdrängung des Metalls aus der Mundhöhle. War es früher nur möglich, einen verloren gegangen Zahn mittels einer Brücke, die ein Beschleifen der Nachbarzähne zur Folge hat, oder durch herausnehmbaren Zahnersatz zu ersetzen, ist es heutzutage mit der modernen Implantologie möglich, Zahnersatz zahnschonend einzugliedern. Auch kann mittels Dentalimplantaten dem Wunsch vieler Patienten nach festem Zahnersatz anstelle eines herausnehmbaren Zahnersatzes entsprochen werden. So kann mit Hilfe neuer biokompatiblen Werkstoffe sowohl der ästhetische Anspruch befriedigt als auch das Selbstwertgefühl vieler Patienten angehoben werden.

  7. CITY III Player's Manual.

    ERIC Educational Resources Information Center

    Envirometrics, Inc., Washington, DC.

    CITY III is a computer-assisted simulation game in which participants make decisions affecting the economic, governmental, and social conditions of a simulated urban area. In CITY III, the computer stores all the relevant statistics for the area, updates data when changes are made, and prints out yearly reports. The computer also simulates…

  8. CITY III Operator's Manual.

    ERIC Educational Resources Information Center

    Envirometrics, Inc., Washington, DC.

    CITY III is a computer-assisted simulation game of an urban system involving player operation of and interaction with economic, social, and government components. The role of operator in the game is to take the handwritten inputs (decisions) from the CITY III participants, process them, and return output which initiates the next round of…

  9. SUPERSTARS III: K-2.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Education, Raleigh.

    SUPERSTARS III is a K-8 program designed as an enrichment opportunity for self-directed learners in mathematics. The basic purpose of SUPERSTARS III is to provide the extra challenge that self-motivated students need in mathematics and to do so in a structured, long-term program that does not impinge on the normal classroom routine or the…

  10. Antithrombin III blood test

    MedlinePlus

    ... AT III) is a protein that helps control blood clotting. A blood test can determine the amount of ... may mean you have an increased risk of blood clotting. This can occur when there is not enough ...

  11. Antithrombin III blood test

    MedlinePlus

    ... be due to: Bone marrow transplant Disseminated intravascular coagulation (DIC) AT III deficiency, an inherited condition Liver ... Schmaier AH, Miller JL. Coagulation and fibrinolysis. In: McPherson ... Management by Laboratory Methods . 22nd ed. Philadelphia, PA: ...

  12. Fusion Power Demonstration III

    SciTech Connect

    Lee, J.D.

    1985-07-01

    This is the third in the series of reports covering the Fusion Power Demonstration (FPD) design study. This volume considers the FPD-III configuration that incorporates an octopole end plug. As compared with the quadrupole end-plugged designs of FPD-I and FPD-II, this octopole configuration reduces the number of end cell magnets and shortens the minimum ignition length of the central cell. The end-cell plasma length is also reduced, which in turn reduces the size and cost of the end cell magnets and shielding. As a contiuation in the series of documents covering the FPD, this report does not stand alone as a design description of FPD-III. Design details of FPD-III subsystems that do not differ significantly from those of the FPD-II configuration are not duplicated in this report.

  13. Pioneer III Probe

    NASA Technical Reports Server (NTRS)

    1961-01-01

    Looking more like surgeons, these technicians wearing 'cleanroom' attire inspect the Pioneer III probe before shipping it to Cape Canaveral, Florida. Pioneer III was launched on December 6, 1958 aboard a Juno II rocket at the Atlantic Missile Range, Cape Canaveral, Florida. The mission objectives were to measure the radiation intensity of the Van Allen radiation belt, test long range communication systems, the launch vehicle and other subsystems. The Juno II failed to reach proper orbital escape velocity. The probe re-entered the Earth's atmosphere on December 7th ending its brief mission.

  14. Summary of Session III

    SciTech Connect

    Furman, M.A.

    2002-06-19

    This is a summary of the talks presented in Session III ''Simulations of Electron-Cloud Build Up'' of the Mini-Workshop on Electron-Cloud Simulations for Proton and Positron Beams ECLOUD-02, held at CERN, 15-18 April 2002.

  15. The Apple III.

    ERIC Educational Resources Information Center

    Ditlea, Steve

    1982-01-01

    Describes and evaluates the features, performance, peripheral devices, available software, and capabilities of the Apple III microcomputer. The computer's operating system, its hardware, and the commercially produced software it accepts are discussed. Specific applications programs for financial planning, accounting, and word processing are…

  16. CITY III Director's Guide.

    ERIC Educational Resources Information Center

    Envirometrics, Inc., Washington, DC.

    CITY III is a computer-assisted simulation game which allows the participants to make decisions affecting various aspects of the economic, governmental, and social sectors of a simulated urban area. The game director selects one of five possible starting city configurations, may set a number of conditions in the city before the start of play, and…

  17. Hyper III on ramp

    NASA Technical Reports Server (NTRS)

    1969-01-01

    The Hyper III was a full-scale lifting-body remotely piloted research vehicle (RPRV) built at what was then the NASA Flight Research Center located at Edwards Air Force Base in Southern California. The Flight Research Center (FRC--as Dryden was named from 1959 until 1976) already had experience with testing small-scale aircraft using model-airplane techniques, but the first true remotely piloted research vehicle was the Hyper III, which flew only once in December 1969. At that time, the Center was engaged in flight research with a variety of reentry shapes called lifting bodies, and there was a desire both to expand the flight research experience with maneuverable reentry vehicles, including a high-performance, variable-geometry craft, and to investigate a remotely piloted flight research technique that made maximum use of a research pilot's skill and experience by placing him 'in the loop' as if he were in the cockpit. (There have been, as yet, no female research pilots assigned to Dryden.) The Hyper III as originally conceived was a stiletto-shaped lifting body that had resulted from a study at NASA's Langley Research Center in Hampton, Virginia. It was one of a number of hypersonic, cross-range reentry vehicles studied at Langley. (Hypersonic means Mach 5--five times the speed of sound--or faster; cross-range means able to fly a considerable distance to the left or right of the initial reentry path.) The FRC added a small, deployable, skewed wing to compensate for the shape's extremely low glide ratio. Shop personnel built the 32-foot-long Hyper III and covered its tubular frame with dacron, aluminum, and fiberglass, for about $6,500. Hyper III employed the same '8-ball' attitude indicator developed for control-room use when flying the X-15, two model-airplane receivers to command the vehicle's hydraulic controls, and a telemetry system (surplus from the X-15 program) to transmit 12 channels of data to the ground not only for display and control but for data

  18. Fueling type III secretion

    PubMed Central

    Lee, Pei-Chung

    2015-01-01

    Type III secretion systems are complex nanomachines that export proteins from the bacterial cytoplasm across the cell envelope in a single step. They are at the core of the machinery used to assemble the bacterial flagellum, and the needle complex many Gram-negative pathogens use to inject effector proteins into host cells and cause disease. Several models have been put forward to explain how this export is energized, and the mechanism has been the subject of considerable debate. Here we present an overview of these models and discuss their relative merits. Recent evidence suggests that the proton motive force is the primary energy source for type III secretion, although contribution from refolding of secreted proteins has not been ruled out. The mechanism, by which the proton motive force is converted to protein export, remains enigmatic. PMID:25701111

  19. Cranial mononeuropathy III - diabetic type

    MedlinePlus

    ... gov/ency/article/000692.htm Cranial mononeuropathy III - diabetic type To use the sharing features on this page, please enable JavaScript. Cranial mononeuropathy III -- diabetic type -- is usually a complication of diabetes that causes ...

  20. Migration Type III

    NASA Astrophysics Data System (ADS)

    Artymowicz, Pawel

    2004-03-01

    Migration type IIIMigration of objects embedded in disks (and the accompanying eccentricity evolution) is becoming a major theme in planetary system formation.The underlying physics can be distilled into the notion of disk-planet coupling via Lindblad resonances, which launch waves, sometimes spectacular spiral shock waves in gas disks. The wave pattern exchanges angular momentum with the planet. That causes (i) migration, (ii) eccentricity evolution, and (iii) gap opening by sufficiently massive planets.A competing source of disk-planet interaction, the corotationaltorques, are much less conspicuous (corotation does not produce easilydetectable waves, as galaxy observers can attest) and have often been missed in the analysis of planet migration. If spiral waves are like waves at Goleta beach, then the corotation acts more like a stealthy riptide. Corotationalflows lie at the basis of a new, surprisingly rapid, mode of migration (type III),superseding the standard type II migration (with a gap), and revising the speed of type I migration (without a gap). The talk will contain results obtained at KITP, e.g., an analytical derivation of da/dt in type III motion. It will be illustrated by videos of high-resolution numerical simulations obtained with different implementations of the Piecewise Parabolic Method hydrodynamics.

  1. POPULATION III HYPERNOVAE

    SciTech Connect

    Smidt, Joseph; Whalen, Daniel J.; Wiggins, Brandon K.; Even, Wesley; Fryer, Chris L.; Johnson, Jarrett L.

    2014-12-20

    Population III supernovae have been of growing interest of late for their potential to directly probe the properties of the first stars, particularly the most energetic events that are visible near the edge of the observable universe. Until now, hypernovae, the unusually energetic Type Ib/c supernovae that are sometimes associated with gamma-ray bursts, have been overlooked as cosmic beacons at the highest redshifts. In this, the latest of a series of studies on Population III supernovae, we present numerical simulations of 25-50 M {sub ☉} hypernovae and their light curves done with the Los Alamos RAGE and SPECTRUM codes. We find that they will be visible at z = 10-15 to the James Webb Space Telescope and z = 4-5 to the Wide-Field Infrared Survey Telescope, tracing star formation rates in the first galaxies and at the end of cosmological reionization. If, however, the hypernova crashes into a dense shell ejected by its progenitor, it is expected that a superluminous event will occur that may be seen at z ∼ 20 in the first generation of stars.

  2. Qualitätsmanagementsysteme - Teil 1

    NASA Astrophysics Data System (ADS)

    Seghezzi, Hans-Dieter; Wasmer, René

    Medizinprodukte haben grundsätzlich hohen Sicherheitskriterien zu genügen, zuverlässig zu funktionieren und dadurch den erwarteten Gesundheitsschutz und Patientennutzen zu gewährleisten. Dies erfordert schon beim Hersteller ein gut funktionierendes und systematisches Qualitätsmanagement welches dafür bürgt, dass bereits zum Zeitpunkt der Inverkehrbringung neuer Produkte die Konformität mit den Anforderungen besteht und nachweisbar ist. In den 90er Jahren sind insbesondere in Europa die anzuwendenden technischen Regeln für den Bereich der Medizinprodukte spürbar harmonisiert worden. Der Gesetzgeber hat dabei die Anwendung von Qualitätsmanagementsystemen stark gefördert und in den gesetzlichen Vorgaben verankert. Eigenverantwortung und Eigenkontrolle haben dadurch bei der Herstellung von Medizinprodukten höhere Bedeutung erlangt und sind unabdingbar wenn es um die erfolgreiche Marktzulassung geht.

  3. Ammonium diphosphitoindate(III)

    PubMed Central

    Hamchaoui, Farida; Rebbah, Houria; Le Fur, Eric

    2013-01-01

    The crystal structure of the title compound, NH4[In(HPO3)2], is built up from InIII cations (site symmetry 3m.) adopting an octa­hedral environment and two different phosphite anions (each with site symmetry 3m.) exhibiting a triangular–pyramidal geometry. Each InO6 octa­hedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO3)2]− layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO3)2]− layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4 + cations and the O atoms of the framework. PMID:23633983

  4. Ammonium diphosphitoindate(III).

    PubMed

    Hamchaoui, Farida; Rebbah, Houria; Le Fur, Eric

    2013-04-01

    The crystal structure of the title compound, NH4[In(HPO3)2], is built up from In(III) cations (site symmetry 3m.) adopting an octa-hedral environment and two different phosphite anions (each with site symmetry 3m.) exhibiting a triangular-pyramidal geometry. Each InO6 octa-hedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO3)2](-) layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO3)2](-) layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4 (+) cations and the O atoms of the framework. PMID:23633983

  5. Pseudo Class III malocclusion

    PubMed Central

    Al-Hummayani, Fadia M.

    2016-01-01

    The treatment of deep anterior crossbite is technically challenging due to the difficulty of placing traditional brackets with fixed appliances. This case report represents a none traditional treatment modality to treat deep anterior crossbite in an adult pseudo class III malocclusion complicated by severely retruded, supraerupted upper and lower incisors. Treatment was carried out in 2 phases. Phase I treatment was performed by removable appliance “modified Hawley appliance with inverted labial bow,” some modifications were carried out to it to suit the presented case. Positive overbite and overjet was accomplished in one month, in this phase with minimal forces exerted on the lower incisors. Whereas, phase II treatment was performed with fixed appliances (braces) to align teeth and have proper over bite and overjet and to close posterior open bite, this phase was accomplished within 11 month. PMID:27052290

  6. Force constants of phosphorus (III) cyanide and arsenic (III) cyanide

    NASA Astrophysics Data System (ADS)

    Edwards, H. G. M.; Fawcett, V.

    The force constants of phosphorus (III) cyanide and arsenic (III) cyanide have been calculated using a simple valence force-field approximation with interaction constants. Several revisions are proposed to the existing vibrational assignments for the As(CN) 3 species and the vibrational assignments for P(CN) 3 are confirmed.

  7. Title III in Special Education.

    ERIC Educational Resources Information Center

    The Title III Quarterly, 1972

    1972-01-01

    The journal on special education programs funded under Title III of the Elementary and Secondary Education Act contains articles on three projects, abstracts of other projects, a picture story on San Diego Schools' outdoor classroom for special education, and a state by state listing of all Title III special education projects. The programs…

  8. SUPERSTARS III: 6-8.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Education, Raleigh.

    SUPERSTARS III is a K-8 program designed as an enrichment opportunity for self-directed learners in mathematics. The basic purpose of SUPERSTARS III is to provide the extra challenge that self-motivated students need in mathematics and to do so in a structured, long-term program that does not impinge on the normal classroom routine or the…

  9. SUPERSTARS III: 3-5.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Education, Raleigh.

    SUPERSTARS III is a K-8 program designed as an enrichment opportunity for self-directed learners in mathematics. The basic purpose of SUPERSTARS III is to provide the extra challenge that self-motivated students need in mathematics and to do so in a structured, long-term program that does not impinge on the normal classroom routine or the…

  10. PREFACE: Quantum Optics III

    NASA Astrophysics Data System (ADS)

    Orszag, M.; Retamal, J. C.; Saavedra, C.; Wallentowitz, S.

    2007-06-01

    All the 50 years of conscious pondering did not bring me nearer to an answer to the question `what is light quanta?'. Nowadays, every rascal believes, he knows it, however, he is mistaken. (A Einstein, 1951 in a letter to M Besso) Quantum optics has played a key role in physics in the last several decades. On the other hand, in these early decades of the information age, the flow of information is becoming more and more central to our daily life. Thus, the related fields of quantum information theory as well as Bose-Einstein condensation have acquired tremendous importance in the last couple of decades. In Quantum Optics III, a fusion of these fields appears in a natural way. Quantum Optics III was held in Pucón, Chile, in 27-30 of November, 2006. This beautiful location in the south of Chile is near the lake Villarrica and below the snow covered volcano of the same name. This fantastic environment contributed to a relaxed atmosphere, suitable for informal discussion and for the students to have a chance to meet the key figures in the field. The previous Quantum Optics conferences took place in Santiago, Chile (Quantum Optics I, 2000) and Cozumel, Mexico (Quantum Optics II, 2004). About 115 participants from 19 countries attended and participated in the meeting to discuss a wide variety of topics such as quantum-information processing, experiments related to non-linear optics and squeezing, various aspects of entanglement including its sudden death, correlated twin-photon experiments, light storage, decoherence-free subspaces, Bose-Einstein condensation, discrete Wigner functions and many more. There was a strong Latin-American participation from Argentina, Brazil, Chile, Colombia, Peru, Uruguay, Venezuela and Mexico, as well as from Europe, USA, China, and Australia. New experimental and theoretical results were presented at the conference. In Latin-America a quiet revolution has taken place in the last twenty years. Several groups working in quantum optics and

  11. Cranial mononeuropathy III - diabetic type

    MedlinePlus

    Diabetic third nerve palsy; Pupil-sparing third cranial nerve palsy ... Cranial mononeuropathy III - diabetic type -- is a mononeuropathy . This means that only one nerve is damaged. The condition affects the third cranial (oculomotor) ...

  12. The MAX III storage ring

    NASA Astrophysics Data System (ADS)

    Sjöström, M.; Wallén, E.; Eriksson, M.; Lindgren, L.-J.

    2009-04-01

    One of the primary goals of the 700 MeV MAX III synchrotron radiation source is to test and gain experience with new magnet and accelerator technology. Each magnet cell is machined out of two solid iron blocks that are then sandwiched together after coil and quadrupole installation. The MAX III ring makes extensive use of combined function magnets to obtain a compact lattice. In order to obtain flexibility in machine tuning pole face current strips are used in the main dipoles, which also contain the horizontally defocusing gradients. Commissioning finished in 2007 and MAX III is now going into user operation. Over the last year, MAX III has been characterized in order to both obtain calibrated models for operation purposes as well as evaluating the magnet technology. The characterization results will be described in this paper.

  13. The START III bargaining space

    SciTech Connect

    Karas, T.H.

    1998-08-01

    The declining state of the Russian military and precarious Russian economic condition will give the US considerable advantages at the START III bargaining table. Taking the US-RF asymmetries into account, this paper discusses a menu of START III measures the US could ask for, and measures it could offer in return, in attempting to negotiate an equitable treaty. Measures the US might seek in a START III treaty include: further reductions in deployed strategic nuclear warheads, irreversibility of reductions through warhead dismantlement; beginning to bring theater nuclear weapons under mutual control, and increased transparency into the Russian nuclear weapons complex. The US may, however, wish to apply its bargaining advantages to attempting to achieve the first steps toward two long-range goals that would enhance US security: bringing theater nuclear weapons into the US-RF arms control arena, and increasing transparency into the Russian nuclear weapons complex. In exchange for measures relating to these objectives, the US might consider offering to Russia: Further strategic weapons reductions approaching levels at which the Russians believe they could maintain a degree of parity with the US; Measures to decrease the large disparities in potential deliver-system uploading capabilities that appear likely under current START II/START III scenarios; and Financial assistance in achieving START II/START III reductions as rapidly as is technically possible.

  14. Thermal and optical properties of Tb(III), Eu(III) and Tb(III)/Eu(III) co-complexed silicone fluorinated acrylate copolymer

    NASA Astrophysics Data System (ADS)

    Zhai, Yinfeng; Xie, Hongde; Cai, Haijun; Cai, Peiqing; Seo, Hyo Jin

    2015-07-01

    Tb(III), Eu(III) and Tb(III)/Eu(III) activated silicone fluorinated acrylate (SFA) have been successfully synthesized using the method of semi-continuous emulsion polymerization. The copolymers are characterized by flourier transform infrared (FT-IR), thermal gravity analysis (TGA), photoluminescence excitation (PLE) and emission (PL) spectroscopy. The copolymer containing Tb(III) and Eu(III) ions display green and red luminescent colors under UV light excitation, respectively. The TGA curves show the thermal decomposition temperatures of the copolymers are up to about 300 °C. The PL spectra show a strong green emission at 546 nm (5D4 → 7F5) of Tb(III) complexed copolymers, and show a prominent red emission at 615 nm (5D0 → 7F2) of Eu(III) complexed copolymers. Different concentrations of Eu(III) and Tb(III) ions are introduced into the copolymer and the energy transfer from Tb(III) to Eu(III) ions in the copolymer was found. Thus, based on the results it can be suggested that SFA:Eu(III), SFA:Tb(III) and SFA:Tb(III)/Eu(III) can be used potentially as luminescent materials.

  15. III-Nitride nanowire optoelectronics

    NASA Astrophysics Data System (ADS)

    Zhao, Songrui; Nguyen, Hieu P. T.; Kibria, Md. G.; Mi, Zetian

    2015-11-01

    Group-III nitride nanowire structures, including GaN, InN, AlN and their alloys, have been intensively studied in the past decade. Unique to this material system is that its energy bandgap can be tuned from the deep ultraviolet (~6.2 eV for AlN) to the near infrared (~0.65 eV for InN). In this article, we provide an overview on the recent progress made in III-nitride nanowire optoelectronic devices, including light emitting diodes, lasers, photodetectors, single photon sources, intraband devices, solar cells, and artificial photosynthesis. The present challenges and future prospects of III-nitride nanowire optoelectronic devices are also discussed.

  16. Title III hazardous air pollutants

    SciTech Connect

    Todd, R.

    1995-12-31

    The author presents an overview of the key provisions of Title III of the Clean Air Act Amendments of 1990. The key provisions include the following: 112(b) -- 189 Hazardous Air Pollutants (HAP); 112(a) -- Major Source: 10 TPY/25 TPY; 112(d) -- Application of MACT; 112(g) -- Modifications; 112(I) -- State Program; 112(j) -- The Hammer; and 112(r) -- Accidental Release Provisions.

  17. Chromium(III), insoluble salts

    Integrated Risk Information System (IRIS)

    Chromium ( III ) , insoluble salts ; CASRN 16065 - 83 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments

  18. Organometallic neptunium(III) complexes.

    PubMed

    Dutkiewicz, Michał S; Farnaby, Joy H; Apostolidis, Christos; Colineau, Eric; Walter, Olaf; Magnani, Nicola; Gardiner, Michael G; Love, Jason B; Kaltsoyannis, Nikolas; Caciuffo, Roberto; Arnold, Polly L

    2016-08-01

    Studies of transuranic organometallic complexes provide a particularly valuable insight into covalent contributions to the metal-ligand bonding, in which the subtle differences between the transuranium actinide ions and their lighter lanthanide counterparts are of fundamental importance for the effective remediation of nuclear waste. Unlike the organometallic chemistry of uranium, which has focused strongly on U(III) and has seen some spectacular advances, that of the transuranics is significantly technically more challenging and has remained dormant. In the case of neptunium, it is limited mainly to Np(IV). Here we report the synthesis of three new Np(III) organometallic compounds and the characterization of their molecular and electronic structures. These studies suggest that Np(III) complexes could act as single-molecule magnets, and that the lower oxidation state of Np(II) is chemically accessible. In comparison with lanthanide analogues, significant d- and f-electron contributions to key Np(III) orbitals are observed, which shows that fundamental neptunium organometallic chemistry can provide new insights into the behaviour of f-elements. PMID:27442286

  19. Terrain Perception for DEMO III

    NASA Technical Reports Server (NTRS)

    Manduchi, R.; Bellutta, P.; Matthies, L.; Owens, K.; Rankin, A.

    2000-01-01

    The Demo III program has as its primary focus the development of autonomous mobility for a small rugged cross country vehicle. In this paper we report recent progress on both stereo-based obstacle detection and terrain cover color-based classification.

  20. Precipitates of Al(III), Sc(III), and La(III) at the muscovite-water interface.

    PubMed

    Saslow Gomez, Sarah A; Geiger, Franz M

    2014-11-20

    The interaction of Al(III), Sc(III), and La(III) with muscovite-water interfaces was studied at pH 4 and 10 mM NaCl using second harmonic generation (SHG) and X-ray photoelectron spectroscopy (XPS). SHG data for Sc(III) and La(III) suggest complete and/or partial irreversible adsorption that is attributed by XPS to the growth of Sc(III) and La(III) hydroxides/oxides on the muscovite surface. Al(III) adsorption appears to coincide with the growth of gibbsite (Al(OH)3) deposits on the muscovite surface, as indicated by the magnitude of the interfacial potential computed from the SHG data. This interpretation of the data is consistent with previous studies reporting the epitaxial growth of gibbsite on the muscovite surface under similar conditions. The implication of our findings is that the surface charge density of mica may change (and in the case of Al(III), even flip sign from negative (mica) to positive (gibbsite)) when Al(III), Sc(III), or La(III) is present in aqueous phases in contact with heterogeneous geochemical media rich in mica-class minerals, even at subsaturation conditions. PMID:25380548

  1. NIF Title III engineering plan

    SciTech Connect

    Deis, G

    1998-06-01

    The purpose of this document is to define the work that must be accomplished by the NIF Project during Title III Engineering. This definition is intended to be sufficiently detailed to provide a framework for yearly planning, to clearly identify the specific deliverables so that the Project teams can focus on them, and to provide a common set of objectives and processes across the Project. This plan has been preceded by similar documents for Title I and Title II design and complements the Site Management Plan, the Project Control Manual, the Quality Assurance Program Plan, the RM Parsons NIF Title III Configuration Control Plan, the Integrated Project Schedule, the Preliminary Safety Analysis Report, the Configuration Management Plan, and the Transition Plan.

  2. DSN tracking system: Mark III-77

    NASA Technical Reports Server (NTRS)

    Chaney, W. D.

    1977-01-01

    The Deep Space Network tracking system is described. Revisions of subsystem Mark III-75 are briefly outlined, and the currently used multimission support subsystem Mark III-77 is described. Tracking functions performed are given as well.

  3. Silver europium(III) polyphosphate

    PubMed Central

    Ayadi, Mounir; Férid, Mokhtar; Moine, Bernard

    2009-01-01

    Europium(III) silver polyphosphate, AgEu(PO3)4, was prepared by the flux method. The atomic arrangement is built up by infinite (PO3)n chains (periodicity of 4) extending along the c axis. These chains are joined to each other by EuO8 dodeca­hedra. The Ag+ cations are located in the voids of this arrangement and are surrounded by five oxygen atoms in a distorted [4+1] coordination. PMID:21582031

  4. Glycosaminoglycans and mucopolysaccharidosis type III.

    PubMed

    Jakobkiewicz-Banecka, Joanna; Gabig-Ciminska, Magdalena; Kloska, Anna; Malinowska, Marcelina; Piotrowska, Ewa; Banecka-Majkutewicz, Zyta; Banecki, Bogdan; Wegrzyn, Alicja; Wegrzyn, Grzegorz

    2016-01-01

    Mucopolysaccharidosis type III (MPS III), or Sanfilippo syndrome, is a lysosomal storage disease in which heparan sulfate is accumulated in lysosomes, as well as outside of cells, as the primary storage material. This disease is a complex of four conditions caused by dysfunctions of one of genes coding for lysosomal enzymes involved in degradation of heparan sulfate: SGSH (coding for heparan N-sulfatase) - causing MPS IIIA, NAGLU (coding for alpha-N-acetylglucosaminidase) - causing MPS IIIB, HGSNAT (coding for acetyl CoA alpha-glucosaminide acetyltransferase) - causing MPS IIIC), and GNS (coding for N-acetylglucosamine-6-sulfatase) - causing MPS IIID. The primary storage is responsible for some disease symptoms, but other arise as a result of secondary storage, including glycosphingolipids, and subsequent processes, like oxidative stress and neuroinflammation. Central nervous system is predominantly affected in all subtypes of MPS III. Heparan sulfate and its derivatives are the most commonly used biomarkers for diagnosis and prediction procedures. Currently, there is no therapy for Sanfilippo syndrome, however, clinical trials are ongoing for enzyme replacement therapy, gene therapy and substrate reduction therapy (particularly gene expression-targeted isoflavone therapy). PMID:27100513

  5. Organometallic neptunium(III) complexes

    NASA Astrophysics Data System (ADS)

    Dutkiewicz, Michał S.; Farnaby, Joy H.; Apostolidis, Christos; Colineau, Eric; Walter, Olaf; Magnani, Nicola; Gardiner, Michael G.; Love, Jason B.; Kaltsoyannis, Nikolas; Caciuffo, Roberto; Arnold, Polly L.

    2016-08-01

    Studies of transuranic organometallic complexes provide a particularly valuable insight into covalent contributions to the metal–ligand bonding, in which the subtle differences between the transuranium actinide ions and their lighter lanthanide counterparts are of fundamental importance for the effective remediation of nuclear waste. Unlike the organometallic chemistry of uranium, which has focused strongly on UIII and has seen some spectacular advances, that of the transuranics is significantly technically more challenging and has remained dormant. In the case of neptunium, it is limited mainly to NpIV. Here we report the synthesis of three new NpIII organometallic compounds and the characterization of their molecular and electronic structures. These studies suggest that NpIII complexes could act as single-molecule magnets, and that the lower oxidation state of NpII is chemically accessible. In comparison with lanthanide analogues, significant d- and f-electron contributions to key NpIII orbitals are observed, which shows that fundamental neptunium organometallic chemistry can provide new insights into the behaviour of f-elements.

  6. The gelation mechanism of chromium(III)

    SciTech Connect

    Shu, P.

    1988-05-01

    Chromium(III) is commonly used crosslinker for preparing profile control gels with polymers having carboxylate and amide functionalities. Cr(III) is applied in many forms. For example, it can be used in the form of simple chromic salts of chloride and sulfate, or as complexed Cr(III) used in leather tanning, or as in-situ generated Cr(III) from the redox reaction of dichromate and bisulfite or thiourea. The gelation rate, and gel quality, doped on which form of Cr(III) is used. The author has found that the Cr olates, produced by hydrolysis of Cr(III) ions, are the reactive crosslinking species. The different gelation rates are due to the different degrees of olation. Furthermore, by controlling the degree of hydrolysis Cr(III) derived from various sources mentioned above can exhibit the same gelation rate.

  7. Titan III-C Launch

    NASA Technical Reports Server (NTRS)

    1970-01-01

    This photograph shows a Titan III-C launch vehicle. Titan vehicles are designed to carry payloads equal to the size and weight of those on the space shuttle. The Titan IV Centaur can put 10,000 pound payloads into geosynchronous orbit, 22,300 miles above Earth. For more information about Titan and Centaur, please see chapters 4 and 8, respectively, in Roger Launius and Dennis Jenkins' book To Reach the High Frontier published by The University Press of Kentucky in 2002.

  8. The Mark III vertex chamber

    SciTech Connect

    Adler, J.; Bolton, T.; Bunnell, K.; Cassell, R.; Cheu, E.; Freese, T.; Grab, C.; Mazaheri, G.; Mir, R.; Odian, A.

    1987-07-01

    The design and construction of the new Mark III vertex chamber is described. Initial tests with cosmic rays prove the ability of track reconstruction and yield triplet resolutions below 50 ..mu..m at 3 atm using argon/ethane (50:50). Also performed are studies using a prototype of a pressurized wire vertex chamber with 8 mm diameter straw geometry. Spatial resolution of 35mm was obtained using dimethyl ether (DME) at 1 atm and 30 ..mu..m using argon/ethane (50/50 mixture) at 4 atm. Preliminary studies indicate the DME to adversely affect such materials as aluminized Mylar and Delrin.

  9. Implementing Title III -- Air toxics

    SciTech Connect

    Shaw, B.W.

    1995-12-31

    The South Coast Air Quality Management District (AQMD) is taking three basic approaches to implementing the new National Emissions Standards for Hazardous Air Pollutants (NESHAPs) from the Title III program: accept and implement, as written, the NESHAPs where few sources are located in the South Coast Air Basin; incorporate with simplification of the NESHAP requirements into AQMD rules when many sources are involved; then seek equivalency by the US EPA; and incorporate with a market-based rule (VOC RECLAIM), part of many NESHAPs which control volatile organic compound as HAPs. Whatever the approach, emphasis will be placed on: streamlining and simplification; helping sources understand requirements and comply; and common sense.

  10. Zinc in +III oxidation state

    NASA Astrophysics Data System (ADS)

    Samanta, Devleena; Jena, Puru

    2012-02-01

    The possibility of Group 12 elements, such as Zn, Cd, and Hg existing in an oxidation state of +III or higher has fascinated chemists for decades. Significant efforts have been made in the past to achieve higher oxidation states for the heavier congener mercury (since the 3^rd ionization potential of the elements decrease as we go down the periodic table). It took nearly 20 years before experiment could confirm the theoretical prediction that Hg indeed can exist in an oxidation state of +IV. While this unusual property of Hg is attributed to the relativistic effects, Zn being much lighter than Hg has not been expected to have an oxidation state higher than +II. Using density functional theory we show that an oxidation state of +III for Zn can be realized by choosing specific ligands with large electron affinities i.e. superhalogens. We demonstrate this by a systematic study of the interaction of Zn with F, BO2, and AuF6 ligands whose electron affinities are progressively higher, namely, 3.4 eV, 4.4 eV, and 8.4 eV, respectively. Discovery of higher oxidation states of elements can help in the formulation of new reactions and hence in the development of new chemistry.

  11. DOE/NNSA perspective safeguard by design: GEN III/III+ light water reactors and beyond

    SciTech Connect

    Pan, Paul Y

    2010-12-10

    An overview of key issues relevant to safeguards by design (SBD) for GEN III/IV nuclear reactors is provided. Lessons learned from construction of typical GEN III+ water reactors with respect to SBD are highlighted. Details of SBD for safeguards guidance development for GEN III/III+ light water reactors are developed and reported. This paper also identifies technical challenges to extend SBD including proliferation resistance methodologies to other GEN III/III+ reactors (except HWRs) and GEN IV reactors because of their immaturity in designs.

  12. Dens invaginatus (Type III B)

    PubMed Central

    Kallianpur, Shreenivas; Sudheendra, US; Kasetty, Sowmya; Joshi, Prathamesh

    2012-01-01

    Dens invaginatus or ‘dens in dente’ is a developmental malformation of the tooth resulting from infolding of the dental papilla before calcification. This article presents a case of dens invaginatus occurring in maxillary right lateral incisor of a 45-year-old male patient. The patient presented with pain and clinically missing maxillary right canine. The tooth was found to be non-vital. Radiographic examination revealed the tooth-in-tooth appearance of lateral incisor with a dilated pulp chamber. The crown of impacted canine was found within the pulp chamber of lateral incisor. Owing to this unique clinical presentation, both the lateral incisor and the impacted canine were extracted. Histopathologic examination confirmed the diagnosis of Dens invaginatus Type III B. A brief review on etiopathogenesis, radiographic features and treatment of dens invaginatus has also been included. PMID:22923901

  13. Comparative adsorption of Eu(III) and Am(III) on TPD.

    PubMed

    Fan, Q H; Zhao, X L; Ma, X X; Yang, Y B; Wu, W S; Zheng, G D; Wang, D L

    2015-09-01

    Comparative adsorption behaviors of Eu(III) and Am(III) on thorium phosphate diphosphate (TPD), i.e., Th4(PO4)4P2O7, have been studied using a batch approach and surface complexation model (SCM) in this study. The results showed that Eu(III) and Am(III) adsorption increased to a large extent with the increase in TPD dose. Strong pH-dependence was observed in both Eu(III) and Am(III) adsorption processes, suggesting that inner-sphere complexes (ISCs) were possibly responsible for the adsorption of Eu(III) and Am(III). Meanwhile, the adsorption of Eu(III) and Am(III) decreased to a different extent with the increase in ion strength, which was possibly related to outer-sphere complexes and/or ion exchange. In the presence of fulvic acid (FA), the adsorption of Eu(III) and Am(III) showed high enhancement mainly due to the ternary surface complexes of TPD-FA-Eu(3+) and TPD-FA-Am(3+). The SCM showed that one ion exchange (≡S3Am/Eu) and two ISCs (≡(XO)2Am/EuNO3 and ≡(YO)2Am/EuNO3) seemed more reasonable to quantitatively describe the adsorption edges of both Eu(III) and Am(III). Our findings obviously showed that Eu(III) could be a good analogue to study actinide behaviors in practical terms. However, it should be kept in mind that there are still obvious differences between the characteristics of Eu(III) and Am(III) in some special cases, for instance, the complex ability with organic matter and adsorption affinity to a solid surface. PMID:26198355

  14. Characterization of ribonuclease III from Brucella.

    PubMed

    Wu, Chang-Xian; Xu, Xian-Jin; Zheng, Ke; Liu, Fang; Yang, Xu-Dong; Chen, Chuang-Fu; Chen, Huan-Chun; Liu, Zheng-Fei

    2016-04-01

    Bacterial ribonuclease III (RNase III) is a highly conserved endonuclease, which plays pivotal roles in RNA maturation and decay pathways by cleaving double-stranded structure of RNAs. Here we cloned rncS gene from the genomic DNA of Brucella melitensis, and analyzed the cleavage properties of RNase III from Brucella. We identified Brucella-encoding small RNA (sRNA) by high-throughput sequencing and northern blot, and found that sRNA of Brucella and Homo miRNA precursor (pre-miRNA) can be bound and cleaved by B.melitensis ribonuclease III (Bm-RNase III). Cleavage activity of Bm-RNase III is bivalent metal cations- and alkaline buffer-dependent. We constructed several point mutations in Bm-RNase III, whose cleavage activity indicated that the 133th Glutamic acid residue was required for catalytic activity. Western blot revealed that Bm-RNase III was differently expressed in Brucella virulence strain 027 and vaccine strain M5-90. Collectively, our data suggest that Brucella RNase III can efficiently bind and cleave stem-loop structure of small RNA, and might participate in regulation of virulence in Brucella. PMID:26778206

  15. Mechanisms of Sb(III) Photooxidation by the Excitation of Organic Fe(III) Complexes.

    PubMed

    Kong, Linghao; He, Mengchang

    2016-07-01

    Organic Fe(III) complexes are widely distributed in the aqueous environment, which can efficiently generate free radicals under light illumination, playing a significant role in heavy metal speciation. However, the potential importance of the photooxidation of Sb(III) by organic Fe(III) complexes remains unclear. Therefore, the photooxidation mechanisms of Sb(III) were comprehensively investigated in Fe(III)-oxalate, Fe(III)-citrate and Fe(III)-fulvic acid (FA) solutions by kinetic measurements and modeling. Rapid photooxidation of Sb(III) was observed in an Fe(III)-oxalate solution over the pH range of 3 to 7. The addition of tert-butyl alcohol (TBA) as an ·OH scavenger quenched the Sb(III) oxidation, suggesting that ·OH is an important oxidant for Sb(III). However, the incomplete quenching of Sb(III) oxidation indicated the existence of other oxidants, presumably an Fe(IV) species in irradiated Fe(III)-oxalate solution. In acidic solutions, ·OH may be formed by the reaction of Fe(II)(C2O4) with H2O2, but a hypothetical Fe(IV) species may be generated by the reaction of Fe(II)(C2O4)2(2-) with H2O2 at higher pH. Kinetic modeling provides a quantitative explanation of the results. Evidence for the existence of ·OH and hypothetical Fe(IV) was also observed in an irradiated Fe(III)-citrate and Fe(III)-FA system. This study demonstrated an important pathway of Sb(III) oxidation in surface waters. PMID:27267512

  16. Organoantimony(III)-Containing Tungstoarsenates(III): From Controlled Assembly to Biological Activity.

    PubMed

    Yang, Peng; Bassil, Bassem S; Lin, Zhengguo; Haider, Ali; Alfaro-Espinoza, Gabriela; Ullrich, Matthias S; Silvestru, Cristian; Kortz, Ulrich

    2015-10-26

    A family of three sandwich-type, phenylantimony(III)-containing tungstoarsenates(III), [(PhSb(III) ){Na(H2 O)}As(III) 2 W19 O67 (H2 O)](11-) (1), [(PhSb(III) )2 As(III) 2 W19 O67 (H2 O)](10-) (2), and [(PhSb(III) )3 (B-α-As(III) W9 O33 )2 ](12-) (3), have been synthesized by one-pot procedures and isolated as hydrated alkali metal salts, Cs3 K3.5 Na4.5 [(PhSb(III) ){Na(H2 O)}As(III) 2 W19 O67 (H2 O)]⋅41H2 O (CsKNa-1), Cs4.5 K5.5 [(PhSb(III) )2 As(III) 2 W19 O67 (H2 O)]⋅35H2 O (CsK-2), and Cs4.5 Na7.5 [(PhSb(III) )3 (B-α-As(III) W9 O33 )2 ]⋅42H2 O (CsNa-3). The number of incorporated {PhSb(III) } units could be selectively tuned from one to three by careful control of the reaction parameters. The three compounds were characterized in the solid state by single-crystal XRD, IR spectroscopy, and thermogravimetric analysis. The aqueous solution stability of sandwich polyanions 1-3 was also studied by multinuclear ((1) H, (13) C, (183) W) NMR spectroscopy. Effective inhibitory activity against six different kinds of bacteria was identified for all three polyanions, for which the activity increased with the number of incorporated {PhSb(III) } groups. PMID:26368119

  17. FATE OF CHROMIUM (III) IN CHLORINATED WATER

    EPA Science Inventory

    The oxidation of trivalent chromium, Cr(III), to the more toxic Cr(VI) in chlorinated water is thermodynamically feasible and was the subject of the study. The study found that free available chlorine (FAC) readily converts Cr(III) to Cr(VI) at a rate that is highly dependent upo...

  18. Genes, genetics, and Class III malocclusion.

    PubMed

    Xue, F; Wong, R W K; Rabie, A B M

    2010-05-01

    To present current views that are pertinent to the investigation of the genetic etiology of Class III malocclusion. Class III malocclusion is thought to be a polygenic disorder that results from an interaction between susceptibility genes and environmental factors. However, research on family pedigrees has indicated that Class III malocclusion might also be a monogenic dominant phenotype. Recent studies have reported that genes that encode specific growth factors or other signaling molecules are involved in condylar growth under mechanical strain. These genes, which include Indian hedgehog homolog (IHH), parathyroid-hormone like hormone (PTHLH), insulin-like growth factor-1 (IGF-1), and vascular endothelial growth factor (VEGF), and variations in their levels of expression play an important role in the etiology of Class III malocclusion. In addition, genome-wide scans have revealed chromosomal loci that are associated with Class III malocclusion. It is likely that chromosomal loci 1p36, 12q23, and 12q13 harbor genes that confer susceptibility to Class III malocclusion. In a case-control association study, we identified erythrocyte membrane protein band 4.1 (EPB41) to be a new positional candidate gene that might be involved in susceptibility to mandibular prognathism. Most of the earlier studies on the genetic etiology of Class III malocclusion have focused on the patterns of inheritance of this phenotype. Recent investigations have focused on understanding the genetic variables that affect Class III malocclusion and might provide new approaches to uncovering the genetic etiology of this phenotype. PMID:20477965

  19. Synthesis and in vitro microbial evaluation of La(III), Ce(III), Sm(III) and Y(III) metal complexes of vitamin B6 drug

    NASA Astrophysics Data System (ADS)

    Refat, Moamen S.; Al-Azab, Fathi M.; Al-Maydama, Hussein M. A.; Amin, Ragab R.; Jamil, Yasmin M. S.

    2014-06-01

    Metal complexes of pyridoxine mono hydrochloride (vitamin B6) are prepared using La(III), Ce(III), Sm(III) and Y(III). The resulting complexes are investigated. Some physical properties, conductivity, analytical data and the composition of the four pyridoxine complexes are discussed. The elemental analysis shows that the formed complexes of La(III), Ce(III), Sm(III) and Y(III) with pyridoxine are of 1:2 (metal:PN) molar ratio. All the synthesized complexes are brown in color and possess high melting points. These complexes are partially soluble in hot methanol, dimethylsulfoxide and dimethylformamide and insoluble in water and some other organic solvents. Elemental analysis data, spectroscopic (IR, UV-vis. and florescence), effective magnetic moment in Bohr magnetons and the proton NMR suggest the structures. However, definite particle size is determined by invoking the X-ray powder diffraction and scanning electron microscopy data. The results obtained suggested that pyridoxine reacted with metal ions as a bidentate ligand through its phenolate oxygen and the oxygen of the adjacent group at the 4‧-position. The molar conductance measurements proved that the pyridoxine complexes are electrolytic in nature. The kinetic and thermodynamic parameters such as: Ea, ΔH*, ΔS* and ΔG* were estimated from the DTG curves. The antibacterial evaluation of the pyridoxine and their complexes were also performed against some gram positive, negative bacteria as well as fungi.

  20. Grant Administration Manual for Title III Coordinators.

    ERIC Educational Resources Information Center

    Mathis, Emily Duncan; Ashmore, Frances W.

    Guidelines for coordinators of programs under Title III of the Higher Education Act of 1965 are presented, based on a national survey of Title III program coordinators. The responsibilities of the coordinator and information on administering the Strengthening Developing Institutions Program (SDIP) grant are covered. The program can either be a…

  1. Preparation of III-V semiconductor nanocrystals

    DOEpatents

    Alivisatos, A.P.; Olshavsky, M.A.

    1996-04-09

    Nanometer-scale crystals of III-V semiconductors are disclosed. They are prepared by reacting a group III metal source with a group V anion source in a liquid phase at elevated temperature in the presence of a crystallite growth terminator such as pyridine or quinoline. 4 figs.

  2. Synthesis, spectroscopic and antimicrobial studies of La(III), Ce(III), Sm(III) and Y(III) Metformin HCl chelates

    NASA Astrophysics Data System (ADS)

    Refat, Moamen S.; Al-Azab, Fathi M.; Al-Maydama, Hussein M. A.; Amin, Ragab R.; Jamil, Yasmin M. S.; Kobeasy, Mohamed I.

    2015-05-01

    Metal complexes of Metformin hydrochloride were prepared using La(III), Ce(III), Sm(III) and Y(III). The resulting complexes were discussed and synthesized to serve as potential insulin-mimetic. Some physical properties and analytical data of the four complexes were checked. The elemental analysis shows that La(III), Ce(III) Sm(III) and Y(III) formed complexes with Metformin in 1:3 (metal:MF) molar ratio. All the synthesized complexes are white and possess high melting points. These complexes are soluble in dimethylsulfoxide and dimethylformamide, partially soluble in hot methanol and insoluble in water and some other organic solvents. From the spectroscopic (infrared, UV-vis and florescence), effective magnetic moment and elemental analyses data, the formula structures are suggested. The results obtained suggested that Metformin reacted with metal ions as a bidentate ligand through its two imino groups. The molar conductance measurements proved that the Metformin complexes are slightly electrolytic in nature. The kinetic thermodynamic parameters such as: E∗, ΔH∗, ΔS∗ and ΔG∗ were estimated from the DTG curves. The antibacterial evaluations of the Metformin and their complexes were also performed against some gram positive, negative bacteria as well as fungi.

  3. The case of King Richard III.

    PubMed

    Skrziepietz, A

    2011-11-01

    In this short essay we will discuss the possible diseases of King Richard III according to the descriptions in Shakespeare's plays King Richard III and Henry VI. Furthermore, it is shown that the description of the defeated enemy as physically and mentally deformed is part of a long tradition which has its roots in Ancient Greece. PMID:22089046

  4. Preparation of III-V semiconductor nanocrystals

    DOEpatents

    Alivisatos, A. Paul; Olshavsky, Michael A.

    1996-01-01

    Nanometer-scale crystals of III-V semiconductors are disclosed, They are prepared by reacting a group III metal source with a group V anion source in a liquid phase at elevated temperature in the presence of a crystallite growth terminator such as pyridine or quinoline.

  5. III-V arsenide-nitride semiconductor

    NASA Technical Reports Server (NTRS)

    Major, Jo S. (Inventor); Welch, David F. (Inventor); Scifres, Donald R. (Inventor)

    2000-01-01

    III-V arsenide-nitride semiconductor are disclosed. Group III elements are combined with group V elements, including at least nitrogen and arsenic, in concentrations chosen to lattice match commercially available crystalline substrates. Epitaxial growth of these III-V crystals results in direct bandgap materials, which can be used in applications such as light emitting diodes and lasers. Varying the concentrations of the elements in the III-V materials varies the bandgaps, such that materials emitting light spanning the visible spectra, as well as mid-IR and near-UV emitters, can be created. Conversely, such material can be used to create devices that acquire light and convert the light to electricity, for applications such as full color photodetectors and solar energy collectors. The growth of the III-V material can be accomplished by growing thin layers of elements or compounds in sequences that result in the overall lattice match and bandgap desired.

  6. Doublet III Big Dee Project

    SciTech Connect

    Davis, L.G.; Luxon, J.L.

    1985-05-01

    The Doublet III tokamak is presently being reconfigured into a new larger dee-shaped plasma configuration. Experiments will begin in 1986 with a goal of high current, high beta plasma operation at moderate magnetic field. The existing toroidal field coil, Ohmic heating coil, and innermost plasma shaping coils will be retained. A new water-cooled vacuum vessel is being fabricated using a corrugated Inconel sandwich wall construction. Six new water-cooled copper poloidal field coils are also being fabricated. The resultant device along with additional power supplies will provide a capability for plasma currents of 3.5 MA for 1.5 s during the first phase of operations; the tokamak systems are designed for 5 MA operation with additional power systems. The four existing 80 keV, 3 MW neutral beam lines are being modified for optimum torus access and 0.7 s operation. These injectors will be upgraded to allow 5 s operation with new sources in 1987. The device has been designed to accommodate an additional 20 MW of ICRH and ECH power in the future. Limiters and vessel wall protection will be provided for initial operation with up to 40 MJ of input energy. Future installation of additional thermal armor will allow operation with up to 200 MJ of input energy over a 10 s period. Most of the existing diagnostics will be modified as required and reinstalled on the new vessel.

  7. Standards in neurosonology. Part III

    PubMed Central

    Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2016-01-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity). PMID:27446600

  8. Title III and toxic torts

    SciTech Connect

    Rodnehausen, G.A.

    1989-07-01

    In July the second annual Toxic Release Inventory (TRI) report under Section 313 of Title III of the Superfund Amendments and Reauthorization Act (SARA), and the computerized, national TRI data-base will be issued. Although the Environmental Protection Agency will not be able to aggregate the July, 1989 reports and issue its own annual report until early next year, we can expect political attention to focus quickly on whether total releases to air, land and water, and in particular total emissions to the air, have increased or decreased from 1987 to 1988. Because the reporting threshold for chemical manufacturing and processing facilities will drop from 75,000 to 50,000 pounds per year, the number of facilities reporting and number of chemicals reported should increase significantly, forcing up total releases. Bringing the totals down will be waste and release reduction efforts already underway in the chemical industry and elsewhere, and perhaps improved accuracy in measurement and estimation of releases. Additions to and deletions from the list of reportable chemicals will also have an effect. Nevertheless, any significant increase in aggregate totals, no matter what the explanation, will be bound to have a political impact on air toxics legislation, and spur public concern with the health risks of air pollution.

  9. Standards in neurosonology. Part III.

    PubMed

    Wojczal, Joanna; Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2016-06-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity). PMID:27446600

  10. Large Hexadecametallic {Mn(III) -Ln(III) } Wheels: Synthesis, Structural, Magnetic, and Theoretical Characterization.

    PubMed

    Vignesh, Kuduva R; Langley, Stuart K; Moubaraki, Boujemaa; Murray, Keith S; Rajaraman, Gopalan

    2015-11-01

    The synthesis, gas sorption studies, magnetic properties, and theoretical studies of new molecular wheels of core type {Mn(III) 8 Ln(III) 8 } (Ln=Dy, Ho, Er, Y and Yb), using the ligand mdeaH2 , in the presence of ortho-toluic or benzoic acid are reported. From the seven wheels studied the {Mn8 Dy8 } and {Mn8 Y8 } analogues exhibit SMM behavior as determined from ac susceptibility experiments in a zero static magnetic field. From DFT calculations a S=16 ground state was determined for the {Mn8 Y8 } complex due to weak ferromagnetic Mn(III) -Mn(III) interactions. Ab initio CASSCF+RASSI-SO calculations on the {Mn8 Dy8 } wheel estimated the Mn(III) -Dy(III) exchange interaction as -0.1 cm(-1) . This weak exchange along with unfavorable single-ion anisotropy of Dy(III) /Mn(III) ions, however, led to the observation of SMM behavior with fast magnetic relaxation. The orientation of the g-anisotropy of the Dy(III) ions is found to be perpendicular to the plane of the wheel and this suggests the possibility of toroidal magnetic moments in the cluster. The {Mn8 Ln8 } clusters reported here are the largest heterometallic Mn(III) Ln(III) wheels and the largest {3d-4f} wheels to exhibit SMM behavior reported to date. PMID:26403264

  11. Mechanisms of Eu(III) and Cm(III) Association With Chlorella Vulgaris

    NASA Astrophysics Data System (ADS)

    Ozaki, T.; Kimura, T.; Ohnuki, T.; Francis, A. J.

    2002-12-01

    Association of Eu(III) and Cm(III) with Chlorella vulgaris and cellulose was studied by a batch method, time-resolved laser-induced fluorescence spectroscopy (TRLFS) and extended X-ray absorption fine structure (EXAFS). The kinetics study performed by a batch method showed that the maximum adsorption of Eu(III) and Cm(III) on C. vulgaris was attained within three minutes of contact time, and afterwards the percentage adsorption decreased with time due to exudates released from C. vulgaris with affinity for Eu(III) and Cm(III). TRLFS showed that the short-term adsorption of Eu(III) on C. vulgaris was attributed to their coordination with the cell wall components comprised of cellulose. TRLFS also demonstrated that Eu(III) coordinated with the functional groups of cellulose very weakly in spite of the large distribution coefficients observed. EXAFS analysis showed the local structure around the Eu(III) adsorbed on cellulose and with C. vulgaris was similar. These results indicate that the reactions both at cell surfaces through the adsorption as well as in solution phases through chelation with the exudates are important in estimating the environmental behavior of Eu(III) and Cm(III) in aqueous environments.

  12. Separation studies of As(III), Sb(III) and Bi(III) by reversed-phase paper chromatographic technique

    SciTech Connect

    Raman, B.; Shinde, V.M.

    1987-07-01

    Reversed-phase paper chromatographic separations of As(III), Sb(III) and Bi(III) have been carried out on Whatman No 1 filter paper impregnated with triphenylphosphine oxide as stationary phase and using organic complexing agents such as sodium acetate, sodium succinate and sodium malonate solutions as active mobile phases. Results for the separation of binary and ternary mixtures are reported and the method has been successfully applied to the separation and detection of these elements present in real samples and at ppm level concentration.

  13. Rapid photooxidation of Sb(III) in the presence of different Fe(III) species

    NASA Astrophysics Data System (ADS)

    Kong, Linghao; He, Mengchang; Hu, Xingyun

    2016-05-01

    The toxicity and mobility of antimony (Sb) are strongly influenced by the redox processes associated with Sb. Dissolved iron (Fe) is widely distributed in the environment as different species and plays a significant role in Sb speciation. However, the mechanisms of Sb(III) oxidation in the presence of Fe have remained unclear because of the complexity of Fe and Sb speciation. In this study, the mechanisms of Sb(III) photooxidation in the presence of different Fe species were investigated systematically. The photooxidation of Sb(III) occurred over a wide pH range, from 1 to 10. Oxygen was not a predominant or crucial factor in the Sb(III) oxidation process. The mechanism of Sb(III) photooxidation varied depending on the Fe(III) species. In acidic solution (pH 1-3), dichloro radicals (radCl2-) and hydroxyl radicals (radOH) generated by the photocatalysis of FeCl2+ and FeOH2+ were the main oxidants for Sb(III) oxidation. Fe(III) gradually transformed into the colloid ferric hydroxide (CFH) and ferrihydrite in circumneutral and alkaline solutions (pH 4-10). Photooxidation of Sb(III) occurred through electron transfer from Sb(III) to Fe(III) along with the reduction of Fe(III) to Fe(II) through a ligand-to-metal charge-transfer (LMCT) process. The photocatalysis of different Fe(III) species may play an important role in the geochemical cycle of Sb(III) in surface soil and aquatic environments.

  14. Neptunium(III) application in extraction chromatography.

    PubMed

    Guérin, Nicolas; Nadeau, Kenny; Larivière, Dominic

    2011-12-15

    This paper describes a novel strategy for actinide separation by extraction chromatography with Np(III) valence adjustment. Neptunium(IV) was reduced to Np(III) using Cr(II) and then selectively separated from uranium (IV) on a TEVA resin. After elution, Np(III) was retained on a DGA resin in order to remove any detrimental chromium impurities. Neptunium(III) formation was demonstrated by the complete and selective elution of Np from TEVA resin (99 ± 7%) in less than 12 mL of 9M HCl from U(IV) (0.7 ± 0.7%). It was determined by UV-visible and kinetic studies that Cr(II) was the only species responsible for the elution of Np(IV) as Np(III) and that the Cr(II) solution could be prepared from 2 to 30 min before its use without the need of complex degassing systems to prevent the oxidation of Np(III) by oxygen. The methodology proposed here with TEVA/DGA resins provides removal of Cr(III) impurities produced at high decontamination factors (2.8 × 10(3) and 7.3 × 10(4) respectively). PMID:22099641

  15. Timely management of developing class III malocclusion.

    PubMed

    Yelampalli, M R; Rachala, M R

    2012-01-01

    Timing of orthodontic treatment, especially for children with developing class III malocclusions, has always been somewhat controversial, and definitive treatment tends to be delayed for severe class III cases. Developing class III patients with moderate to severe anterior crossbite and deep bite may need early intervention in some selected cases. Class III malocclusion may develop in children as a result of an inherent growth abnormality, i.e. true class III malocclusion, or as a result of premature occlusal contacts causing forward functional shift of the mandible, which is known as pseudo class III malocclusion. These cases, if not treated at the initial stage of development, interfere with normal growth of the jaw bases and may result in severe facial deformities. The treatment should be carried out as early as possible for permitting normal growth of the skeletal bases. This paper deals with the selection of an appropriate appliance from the various current options available for early intervention in developing class III malocclusion through two case reports. PMID:22565523

  16. Photodetectors using III-V nitrides

    DOEpatents

    Moustakas, Theodore D.; Misra, Mira

    1997-01-01

    A photodetector using a III-V nitride and having predetermined electrical properties is disclosed. The photodetector includes a substrate with interdigitated electrodes formed on its surface. The substrate has a sapphire base layer, a buffer layer formed from a III-V nitride and a single crystal III-V nitride film. The three layers are formed by electron cyclotron resonance microwave plasma-assisted molecular beam epitaxy (ECR-assisted MBE). Use of the ECR-assisted MBE process allows control and predetermination of the electrical properties of the photodetector.

  17. Photodetectors using III-V nitrides

    DOEpatents

    Moustakas, T.D.; Misra, M.

    1997-10-14

    A photodetector using a III-V nitride and having predetermined electrical properties is disclosed. The photodetector includes a substrate with interdigitated electrodes formed on its surface. The substrate has a sapphire base layer, a buffer layer formed from a III-V nitride and a single crystal III-V nitride film. The three layers are formed by electron cyclotron resonance microwave plasma-assisted molecular beam epitaxy (ECR-assisted MBE). Use of the ECR-assisted MBE process allows control and predetermination of the electrical properties of the photodetector. 24 figs.

  18. Genetics Home Reference: mucolipidosis III alpha/beta

    MedlinePlus

    ... Health Conditions mucolipidosis III alpha/beta mucolipidosis III alpha/beta Enable Javascript to view the expand/collapse ... PDF Open All Close All Description Mucolipidosis III alpha/beta is a slowly progressive disorder that affects ...

  19. Complexation of N4-Tetradentate Ligands with Nd(III) and Am(III)

    SciTech Connect

    Ogden, Mark D.; Sinkov, Sergey I.; Meier, G. Patrick; Lumetta, Gregg J.; Nash, Kenneth L.

    2012-12-06

    To improve understanding of aza-complexants in trivalent actinide–lanthanide separations, a series of tetradentate N-donor ligands have been synthesized and their complexation of americium(III) and neodymium(III) investigated by UV–visible spectrophotometry in methanolic solutions. The six pyridine/alkyl amine/imine ligands are N,N0-bis(2-methylpyridyl)-1,2-diaminoethane, N,N0-bis(2-methylpyridyl)-1,3-diaminopropane, trans-N,N-bis(2-pyridylmethyl)-1,2-diaminocyclohexane (BPMDAC), N,N’-bis(2-pyridylmethyl)piperazine, N,N’-bis-[pyridin-2-ylmethylene]ethane-1,2-diamine, and trans-N,Nbis-([pyridin-2-ylmethylene]-cyclohexane-1,2-diamine. Each ligand has two pyridine groups and two aliphatic amine/imine N-donor atoms arranged with different degrees of preorganization and structural backbone rigidity. Conditional stability constants for the complexes of Am(III) and Nd(III) by these ligands establish the selectivity patterns. The overall selectivity of Am(III) over Nd(III) is similar to that reported for the terdentate bis(dialkyltriazinyl)pyridine molecules. The cyclohexane amine derivative (BPMDAC) is the strongest complexant and shows the highest selectivity for Am(III) over Nd(III) while the imines appear to prefer a bridging arrangement between two cations. These results suggest that this series of ligands could be employed to develop an enhanced actinide(III)– lanthanide(III) separation system.

  20. Extraction chromatographic separation of Am(III) and Eu(III) by TPEN-immobilized gel

    SciTech Connect

    Takeshita, K.; Ogata, T.; Oaki, H.; Inaba, Y.; Mori, A.; Yaita, T.; Koyama, S.I.

    2013-07-01

    A TPEN derivative with 4 vinyl groups, N,N,N',N' -tetrakis-(4-propenyloxy-2-pyridylmethyl)ethylenediamine (TPPEN) was synthesized for the separation of trivalent minor actinides (Am(III)) and lanthanides (Eu(III)). A co-polymer gel with TPPEN and N-isopropylacrylamide (NIPA) showed a high separation factor of Am(III) over Eu(III) (SF[Am/Eu]), which was evaluated to be 26 at pH=5. Thin film of NIPA-TPPEN gel (average thickness: 2-40 nm) was immobilized on the pore surface in porous silica particles (particle diameter : 50 μm, average pore diameter : 50 and 300 nm) and a chromatographic column (diameter: 6 mm, height: 11 mm) packed with the gel-coated particles was prepared. A small amount of weakly acidic solution (pH=4) containing Am(III) and Eu(III) was supplied in the column and the elution tests of Am(III) and Eu(III) were carried out. Eu(III) was recovered separately by a weakly acidic eluent (pH=4) at 313 K and Am(III) by a highly acidic eluent (pH=2) at 298 K. These results suggest that the contentious separation of minor actinides and lanthanides is attainable by a new extraction chromatographic process with two columns adjusted to 298 K and 313 K. (authors)

  1. Potentiometry: A Chromium (III) -- EDTA Complex

    ERIC Educational Resources Information Center

    Hoppe, J. I.; Howell, P. J.

    1975-01-01

    Describes an experiment that involves the preparation of a chromium (III)-EDTA compound, a study of its infrared spectrum, and the potentiometric determination of two successive acid dissociation constants. (Author/GS)

  2. Synthesis, thermal and spectroscopic behaviors of metal-drug complexes: La(III), Ce(III), Sm(III) and Y(III) amoxicillin trihydrate antibiotic drug complexes

    NASA Astrophysics Data System (ADS)

    Refat, Moamen S.; Al-Maydama, Hussein M. A.; Al-Azab, Fathi M.; Amin, Ragab R.; Jamil, Yasmin M. S.

    2014-07-01

    The metal complexes of Amoxicillin trihydrate with La(III), Ce(III), Sm(III) and Y(III) are synthesized with 1:1 (metal:Amox) molar ratio. The suggested formula structures of the complexes are based on the results of the elemental analyses, molar conductivity, (infrared, UV-visible and fluorescence) spectra, effective magnetic moment in Bohr magnetons, as well as the thermal analysis (TG), and characterized by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The results obtained suggested that Amoxicillin reacted with metal ions as tridentate ligands, coordinating the metal ion through its amino, imino, and β-lactamic carbonyl. The kinetic thermodynamic parameters such as: Ea, ΔH*, ΔS* and ΔG* were estimated from the DTG curves.

  3. SAGE III/Meteor - 3M

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Full view of the SAGE III Bench Checkout Unit, Collimated Source Bench (CSB), Portable Image Generator (PIG) on tripod, and Stratospheric Aerosol Gastropheric Experiment (SAGE)/Meteor - 3M flight instrument. Photographed in building 1250, 40 foot clean room.

  4. SAGE III/Meteor - 3M

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Back view of the SAGE III Bench Checkout Unit, Portable Image Generator (PIG) on tripod, and the Stratospheric Aerosol Gastropheric Experiment (SAGE)/Meteor - 3M flight instrument. Photographed in building 1250, 40 foot clean room.

  5. Sorption of indium (III) onto carbon nanotubes.

    PubMed

    Alguacil, F J; Lopez, F A; Rodriguez, O; Martinez-Ramirez, S; Garcia-Diaz, I

    2016-08-01

    Indium has numerous applications in different industrial sectors and is not an abundant element. Therefore appropriate technology to recover this element from various process wastes is needed. This research reports high adsorption capacity of multiwalled carbon nanotubes (MWCNT) for In(III). The effects of pH, kinetics, isotherms and adsorption mechanism of MWCNT on In(III) adsorption were investigated and discussed in detail. The pH increases improves the adsorption capacity for In(III). The Langmuir adsorption model is the best fit with the experimental data. For the kinetic study, the adsorption onto MWCNT could be fitted to pseudo second-order. The adsorption of indium(III) can be described to a mechanism which consists of a film diffusion controlled process. Metal desorption can be achieved with acidic solutions. PMID:27085001

  6. SAGE III capabilities and global change

    NASA Technical Reports Server (NTRS)

    Mccormick, M. Patrick

    1991-01-01

    The science objectives of the satellite-borne SAGE III are presented as they pertain to detecting global change. SAGE III is the proposed follow on and improved version of SAM II, SAGE I and SAGE II which have measured stratospheric and, in some cases, tropospheric species since late 1978. Specifically, SAGE III will measure profiles of aerosols, ozone, water vapor, nitrogen dioxide and trioxide, neutral density, temperature, clouds, and chlorine dioxide using the solar and lunar occultation techniques. These techniques are inherently self-calibrating, provide high vertical resolution, and use well-behaved data retrievals making them ideal for trend detection and global change studies. The potential capabilities of SAGE III are illustrated by using data and results from SAM II, SAGE I and SAGE II.

  7. The Mark III Hypercube-Ensemble Computers

    NASA Technical Reports Server (NTRS)

    Peterson, John C.; Tuazon, Jesus O.; Lieberman, Don; Pniel, Moshe

    1988-01-01

    Mark III Hypercube concept applied in development of series of increasingly powerful computers. Processor of each node of Mark III Hypercube ensemble is specialized computer containing three subprocessors and shared main memory. Solves problem quickly by simultaneously processing part of problem at each such node and passing combined results to host computer. Disciplines benefitting from speed and memory capacity include astrophysics, geophysics, chemistry, weather, high-energy physics, applied mechanics, image processing, oil exploration, aircraft design, and microcircuit design.

  8. SAGE III solar ozone measurements: Initial results

    NASA Technical Reports Server (NTRS)

    Wang, Hsiang-Jui; Cunnold, Derek M.; Trepte, Chip; Thomason, Larry W.; Zawodny, Joseph M.

    2006-01-01

    Results from two retrieval algorithms, o3-aer and o3-mlr , used for SAGE III solar occultation ozone measurements in the stratosphere and upper troposphere are compared. The main differences between these two retrieved (version 3.0) ozone are found at altitudes above 40 km and below 15 km. Compared to correlative measurements, the SAGE II type ozone retrievals (o3-aer) provide better precisions above 40 km and do not induce artificial hemispheric differences in upper stratospheric ozone. The multiple linear regression technique (o3_mlr), however, can yield slightly more accurate ozone (by a few percent) in the lower stratosphere and upper troposphere. By using SAGE III (version 3.0) ozone from both algorithms and in their preferred regions, the agreement between SAGE III and correlative measurements is shown to be approx.5% down to 17 km. Below 17 km SAGE III ozone values are systematically higher, by 10% at 13 km, and a small hemispheric difference (a few percent) appears. Compared to SAGE III and HALOE, SAGE II ozone has the best accuracy in the lowest few kilometers of the stratosphere. Estimated precision in SAGE III ozone is about 5% or better between 20 and 40 km and approx.10% at 50 km. The precision below 20 km is difficult to evaluate because of limited coincidences between SAGE III and sondes. SAGE III ozone values are systematically slightly larger (2-3%) than those from SAGE II but the profile shapes are remarkably similar for altitudes above 15 km. There is no evidence of any relative drift or time dependent differences between these two instruments for altitudes above 15-20 km.

  9. Population III Stars Around the Milky Way

    NASA Astrophysics Data System (ADS)

    Komiya, Yutaka; Suda, Takuma; Fujimoto, Masayuki Y.

    2016-03-01

    We explore the possibility of observing Population III (Pop III) stars, born of primordial gas. Pop III stars with masses below 0.8 M⊙ should survive to date though are not yet observed, but the existence of stars with low metallicity as [{{Fe}}/{{H}}]\\lt -5 in the Milky Way halo suggests the surface pollution of Pop III stars with accreted metals from the interstellar gas after birth. In this paper, we investigate the runaway of Pop III stars from their host mini-halos, considering the ejection of secondary members from binary systems when their massive primaries explode as supernovae. These stars save them from surface pollution. By computing the star formation and chemical evolution along with the hierarchical structure formation based on the extended Press-Schechter merger trees, we demonstrate that several hundreds to tens of thousands of low-mass Pop III stars escape from the building blocks of the Milky Way. The second and later generations of extremely metal-poor stars also escaped from the mini-halos. We discuss the spatial distributions of these escaped stars by evaluating the distances between the mini-halos in the branches of merger trees under the spherical collapse model of dark matter halos. It is demonstrated that the escaped stars distribute beyond the stellar halo with a density profile close to the dark matter halo, while Pop III stars are slightly more centrally concentrated. 6%-30% of the escaped stars leave the Milky Way and go out into the intergalactic space. Based on the results, we discuss the feasibility of observing the Pop III stars with the pristine surface abundance.

  10. Lanthanum(III) and praseodymium(III) derivatives with dithiocarbamates derived from α-amino acids

    NASA Astrophysics Data System (ADS)

    Rai, Anita; Sengupta, Soumitra K.; Pandey, Om P.

    2006-06-01

    Lanthanum(III) and praseodymium(III) complexes with dithiocarbamates have been synthesized by the reactions of lanthanum(III) and praseodymium(III) chloride with barium dithiocarbamate and complexes of type [LnCl(L)H 2O] n have been obtained (where Ln = La(III) or Pr(III); L = barium salt of dithiocarbamate derived from glycine, L-leucine, L-valine, DL-alanine). The complexes have been characterized by elemental analysis, molar conductance, electronic absorption and fluorescence, infrared, far infrared, 1H NMR spectral studies. The presence of coordinated water molecule is inferred from thermogravimetric analysis which indicates the loss of one water molecule at 150-170 °C. The oscillator strength, Judd-Ofelt intensity parameter, stimulated emission cross-section, etc. have been obtained for different transitions of Pr 3+.

  11. Gallium(iii) and iron(iii) complexes of quinolone antimicrobials.

    PubMed

    Mjos, Katja Dralle; Cawthray, Jacqueline F; Polishchuk, Elena; Abrams, Michael J; Orvig, Chris

    2016-08-16

    Iron is an essential nutrient for many microbes. According to the "Trojan Horse Hypothesis", biological systems have difficulties distinguishing between Fe(3+) and Ga(3+), which constitutes the antimicrobial efficacy of the gallium(iii) ion. Nine novel tris(quinolono)gallium(iii) complexes and their corresponding iron(iii) analogs have been synthesized and fully characterized. Quinolone antimicrobial agents from three drug generations were used in this study: ciprofloxacin, enoxacin, fleroxacin, levofloxacin, lomefloxacin, nalidixic acid, norfloxacin, oxolinic acid, and pipemidic acid. The antimicrobial efficacy of the tris(quinolono)gallium(iii) complexes was studied against E. faecalis and S. aureus (both Gram-positive), as well as E. coli, K. pneumonia, and P. aeruginosa (all Gram-negative) in direct comparison to the tris(quinolono)iron(iii) complexes and the corresponding free quinolone ligands at various concentrations. For the tris(quinolono)gallium(iii) complexes, no combinational antimicrobial effects between Ga(3+) and the quinolone antimicrobial agents were observed. PMID:27315225

  12. Design of Integrated III-Nitride/Non-III-Nitride Tandem Photovoltaic Devices

    SciTech Connect

    Toledo, N. G.; Friedman, D.J.; Farrell, R. M.; Perl, E. E.; Lin, C. T.; Bowers, J. E.; Speck, J. S.; Mishra, U. K.

    2012-03-01

    The integration of III-nitride and non-III-nitride materials for tandem solar cell applications can improve the efficiency of the photovoltaic device due to the added power contributed by the III-nitride top cell to that of high-efficiency multi-junction non-III-nitride solar cells if the device components are properly designed and optimized. The proposed tandem solar cell is comprised of a III-nitride top cell bonded to a non-III-nitride, series-constrained, multi-junction subcell. The top cell is electrically isolated, but optically coupled to the underlying subcell. The use of a III-nitride top cell is potentially beneficial when the top junction of a stand-alone non-III-nitride subcell generates more photocurrent than the limiting current of the non-III-nitride subcell. Light producing this excess current can either be redirected to the III-nitride top cell through high energy photon absorption, redirected to the lower junctions through layer thickness optimization, or a combination of both, resulting in improved total efficiency. When the non-III-nitride cell's top junction is the limiting junction, the minimum power conversion efficiency that the III-nitride top cell must contribute should compensate for the spectrum filtered from the multi-junction subcell for this design to be useful. As the III-nitride absorption edge wavelength, {lambda}{sub N}, increases, the performance of the multi-junction subcell decreases due to spectral filtering. In the most common spectra of interest (AM1.5G, AM1.5 D, and AM0), the technology to grow InGaN cells with {lambda}{sub N}<520 nm is found to be sufficient for III-nitride top cell applications. The external quantum efficiency performance, however, of state-of-the-art InGaN solar cells still needs to be improved. The effects of surface/interface reflections are also presented. The management of these reflection issues determines the feasibility of the integrated III-nitride/non-III-nitride design to improve overall cell

  13. Implantate im Mittelohrbereich - Teil 2 (Ergänzungen 2007)

    NASA Astrophysics Data System (ADS)

    Stieve, M.; Lenarz, Thomas

    In Deutschland leben ca. 12 Millionen Menschen, die an einer ein- oder beidseitigen Schwerhörigkeit leiden. Diese kann angeboren oder im Laufe des Lebens erworben sein. Klinisch und therapeutisch wichtig ist die Unterscheidung hinsichtlich des Schädigungsortes im Bereich des Mittelohres, d. h. eine Schalleitungsschwerhörigkeit, oder im Bereich des Innenohres, d. h. eine Schallempfindungsschwerhörigkeit, wobei hier der Schädigungsort auch am Hörnerven oder in den zentralen Hörabschnitten liegen kann. Therapeutisch lassen sich sowohl Schwerhörigkeiten im Bereich des Mittelohres als auch im Innenohr und sogar im Hirnstammbereich (Hirnstammimplantat) behandeln. 1,9 Millionen Schwerhörige haben eine Erkrankung im Mittelohrbereich, d. h. der Schall kann nur ungenügend auf das Innenohr übertragen werden. Die Ursache besteht meist in einer chronischen Mittelohrentzündung, die zu einer Zerstörung des Trommelfells und der Gehörknöchelchenkette geführt haben. Therapeutisch und damit als Prinzip der operativen Hörverbesserung steht primär der Verschluß des Trommelfells oder eine Rekonstruktion der Gehörknöchelchen. Mittelohroperationen werden mikrochirurgisch unter dem Operationsmikroskop durchgeführt, wobei zunächst durch eine sanierende Operation der Entzündungsprozeß entfernt wird und nach einer Ausheilungszeit die Gehörknöchelchenkette durch künstliche Prothesen rekonstruiert werden kann.

  14. Association of Eu(III) and Cm(III) With Halophiles

    NASA Astrophysics Data System (ADS)

    Ozaki, T.; Takenaka, Y.; Ohnuki, T.; Gillow, J. B.; Francis, A. J.

    2003-12-01

    Halophiles live in high ionic strength brine. The mechanisms of metal association with these microorganisms are poorly understood. In this study, we determined the distribution of Eu(III) and Cm(III) on halophiles, Halomonas sp. (WIPP1A) which was isolated from the Waste Isolation Pilot Plant (WIPP) repository in Carlsbad, US., Halomonas elongata (ATCC33173), Halobacterium salinarum (ATCC19700), and Halobacterium halobium (ATCC43214) and examined the coordination environment of Eu(III) adsorbed on the cells by time-resolved laser-induced fluorescence spectroscopy (TRLFS). The cells of Halomonas sp. and H. elongata were grown in media containing 10 - 15 w/v% and 3.5 - 30 w/v% NaCl, respectively. Halobacterium salinarum and H. halobium were grown in media containing 25 w/v% NaCl. The logarithmic distribution coefficient (log Kd) was measured by using the cells at the late exponential phase. After washing the cells with the same concentrations of NaCl, the cells were mixed with 1x10-6 mol dm-3 Eu(III) and 1x10-8 mol dm-3 Cm(III) at pH 5 in the same concentrations of NaCl and log Kd of Eu(III) and Cm(III) was determined. For Halomonas sp. and H. elongata, log Kd was determined as a function of NaCl concentrations. The coordination environment of Eu(III) adsorbed on the cells was estimated by TRLFS. For TRLFS measurements, samples were prepared by adding cells to a solution of 1x10-3 mol dm-3 Eu(III) with the same concentrations of NaCl as the culture media. For Halomonas sp. and H. elongata, log Kd of Cm(III) was apparently larger than that of Eu(III) at all the NaCl concentrations examined. On the other hand, log Kd of Eu(III) and Cm(III) for H. salinarum and H. halobium was almost identical. Our previous study demonstrated that non-halophiles, Chlorella vulgaris, Bacillus subtilis, and Pseudomonas fluorescens show no preferences between these elements. Chemical properties of Eu(III) and Cm(III) are almost identical. Our findings suggest that the difference in log Kd

  15. Sparkle/PM3 Parameters for the Modeling of Neodymium(III), Promethium(III), and Samarium(III) Complexes.

    PubMed

    Freire, Ricardo O; da Costa, Nivan B; Rocha, Gerd B; Simas, Alfredo M

    2007-07-01

    The Sparkle/PM3 model is extended to neodymium(III), promethium(III), and samarium(III) complexes. The unsigned mean error, for all Sparkle/PM3 interatomic distances between the trivalent lanthanide ion and the ligand atoms of the first sphere of coordination, is 0.074 Å for Nd(III); 0.057 Å for Pm(III); and 0.075 Å for Sm(III). These figures are similar to the Sparkle/AM1 ones of 0.076 Å, 0.059 Å, and 0.075 Å, respectively, indicating they are all comparable models. Moreover, their accuracy is similar to what can be obtained by present-day ab initio effective potential calculations on such lanthanide complexes. Hence, the choice of which model to utilize will depend on the assessment of the effect of either AM1 or PM3 on the quantum chemical description of the organic ligands. Finally, we present a preliminary attempt to verify the geometry prediction consistency of Sparkle/PM3. Since lanthanide complexes are usually flexible, we randomly generated 200 different input geometries for the samarium complex QIPQOV which were then fully optimized by Sparkle/PM3. A trend appeared in that, on average, the lower the total energy of the local minima found, the lower the unsigned mean errors, and the higher the accuracy of the model. These preliminary results do indicate that attempting to find, with Sparkle/PM3, a global minimum for the geometry of a given complex, with the understanding that it will tend to be closer to the experimental geometry, appears to be warranted. Therefore, the sparkle model is seemingly a trustworthy semiempirical quantum chemical model for the prediction of lanthanide complexes geometries. PMID:26633229

  16. Stoichiometries of arsenazo III-Ca complexes.

    PubMed Central

    Palade, P; Vergara, J

    1983-01-01

    The equilibrium interactions of the metallochromic indicator arsenazo III with calcium at physiological ionic strength and pH were investigated spectrophotometrically and with the aid of a calcium electrode. Evidence suggests the formation of more than one dye-calcium complex. The analysis of data obtained over a 10,000-fold range of dye concentrations concludes that at the concentrations used for in vitro biochemical studies (10--100 microM), arsenazo III absorbance changes in response to calcium binding primarily involve the formation of a complex involving two dye molecules and two calcium ions. At millimolar dye concentrations, typical of physiological calcium transient determinations in situ, a second complex involving two arsenazo III molecules and one calcium ion is additionally formed. A third complex, involving one arsenazo III molecule and one calcium ion, is formed at very low dye concentrations. The results reported here suggest that equilibrium calibration of the dye with calcium cannot be used directly to satisfactorily relate transient absorbance changes in physiological preparations to calcium concentration changes since several stoichiometrically distinct complexes with different absorbances could be formed at different rates. The results of this study do not permit the elucidation of a unique kinetic scheme of arsenazo III complexation with calcium; for this, in vitro kinetic analysis is required. Results of similar analysis of the dye interaction with magnesium are also reported, and these appear compatible with a much simpler model of complexation. PMID:6626673

  17. A semisimultaneous inversion algorithm for SAGE III

    NASA Astrophysics Data System (ADS)

    Ward, Dale M.

    2002-12-01

    The Stratospheric Aerosol and Gas Experiment (SAGE) III instrument was successfully launched into orbit on 10 December 2001. The planned operational species separation inversion algorithm will utilize a stepwise retrieval strategy. This paper presents an alternative, semisimultaneous species separation inversion that simultaneously retrieves all species over user-specified vertical intervals or blocks. By overlapping these vertical blocks, retrieved species profiles over the entire vertical range of the measurements are obtained. The semisimultaneous retrieval approach provides a more straightforward method for evaluating the error coupling that occurs among the retrieved profiles due to various types of input uncertainty. Simulation results are presented to show how the semisimultaneous inversion can enhance understanding of the SAGE III retrieval process. In the future, the semisimultaneous inversion algorithm will be used to help evaluate the results and performance of the operational inversion. Compared to SAGE II, SAGE III will provide expanded and more precise spectral measurements. This alone is shown to significantly reduce the uncertainties in the retrieved ozone, nitrogen dioxide, and aerosol extinction profiles for SAGE III. Additionally, the well-documented concern that SAGE II retrievals are biased by the level of volcanic aerosol is greatly alleviated for SAGE III.

  18. The Berkeley SETI Program: SERENDIP III

    NASA Astrophysics Data System (ADS)

    Donnelly, C.; Bowyer, S.; Werthimer, D.; Ng, D.; Cobb, J.

    1993-05-01

    The Berkeley SETI (Search for Extraterrestrial Intelligence) program, named SERENDIP, was begun in the late 1970's. It is aimed at detecting narrow band radio signals from extraterrestrial civilizations. The SERENDIP I, II and III systems have operated autonomously in a piggyback search mode, conducting unobtrusive, long-term observations on the world's largest radio telescopes. The latest generation SERENDIP instrument, SERENDIP III, is a four million channel FFT-based spectrum analyzer operating at 0.6 Hz resolution with a 1.7 second integration time. SERENDIP III has been operating at the NAIC Arecibo Observatory since April, 1992. Several independent criteria suggest that this search is the most sensitive SETI search in operation. To date SERENDIP III has accumulated over 3600 hours of high quality telescope time, observing 75% of the sky visible by the Arecibo telescope. Over this period SERENDIP III has analyzed over 30 trillion spectral bins, and recorded information on 110 million strong narrow band signals in the 424--435 MHz band. A handful of these signals have survived our RFI rejection and signal detection algorithms, and have thus been added to our list of ETI candidate signals. A follow-up observation program will be conducted next year in an attempt to verify each of these candidate signals. This work has been supported by NASA grant NAGW-2722.

  19. Failures in Phase III: Causes and Consequences.

    PubMed

    Seruga, Bostjan; Ocana, Alberto; Amir, Eitan; Tannock, Ian F

    2015-10-15

    Phase III randomized controlled trials (RCT) in oncology fail to lead to registration of new therapies more often than RCTs in other medical disciplines. Most RCTs are sponsored by the pharmaceutical industry, which reflects industry's increasing responsibility in cancer drug development. Many preclinical models are unreliable for evaluation of new anticancer agents, and stronger evidence of biologic effect should be required before a new agent enters the clinical development pathway. Whenever possible, early-phase clinical trials should include pharmacodynamic studies to demonstrate that new agents inhibit their molecular targets and demonstrate substantial antitumor activity at tolerated doses in an enriched population of patients. Here, we review recent RCTs and found that these conditions were not met for most of the targeted anticancer agents, which failed in recent RCTs. Many recent phase III RCTs were initiated without sufficient evidence of activity from early-phase clinical trials. Because patients treated within such trials can be harmed, they should not be undertaken. The bar should also be raised when making decisions to proceed from phase II to III and from phase III to marketing approval. Many approved agents showed only better progression-free survival than standard treatment in phase III trials and were not shown to improve survival or its quality. Introduction of value-based pricing of new anticancer agents would dissuade the continued development of agents with borderline activity in early-phase clinical trials. When collaborating with industry, oncologists should be more critical and better advocates for cancer patients. PMID:26473191

  20. Hybrid III-V/silicon lasers

    NASA Astrophysics Data System (ADS)

    Kaspar, P.; Jany, C.; Le Liepvre, A.; Accard, A.; Lamponi, M.; Make, D.; Levaufre, G.; Girard, N.; Lelarge, F.; Shen, A.; Charbonnier, P.; Mallecot, F.; Duan, G.-H.; Gentner, J.-.; Fedeli, J.-M.; Olivier, S.; Descos, A.; Ben Bakir, B.; Messaoudene, S.; Bordel, D.; Malhouitre, S.; Kopp, C.; Menezo, S.

    2014-05-01

    The lack of potent integrated light emitters is one of the bottlenecks that have so far hindered the silicon photonics platform from revolutionizing the communication market. Photonic circuits with integrated light sources have the potential to address a wide range of applications from short-distance data communication to long-haul optical transmission. Notably, the integration of lasers would allow saving large assembly costs and reduce the footprint of optoelectronic products by combining photonic and microelectronic functionalities on a single chip. Since silicon and germanium-based sources are still in their infancy, hybrid approaches using III-V semiconductor materials are currently pursued by several research laboratories in academia as well as in industry. In this paper we review recent developments of hybrid III-V/silicon lasers and discuss the advantages and drawbacks of several integration schemes. The integration approach followed in our laboratory makes use of wafer-bonded III-V material on structured silicon-on-insulator substrates and is based on adiabatic mode transfers between silicon and III-V waveguides. We will highlight some of the most interesting results from devices such as wavelength-tunable lasers and AWG lasers. The good performance demonstrates that an efficient mode transfer can be achieved between III-V and silicon waveguides and encourages further research efforts in this direction.

  1. Psychometric Testing of the FACES III with Rural Adolescents

    ERIC Educational Resources Information Center

    Ide, Bette; Dingmann, Colleen; Cuevas, Elizabeth; Meehan, Maurita

    2010-01-01

    This study tests the validity and reliability of the Family Adaptability and Cohesion Scale III (FACES III) in two samples of rural adolescents. The underlying theory is the linear 3-D circumplex model. The FACES III was administered to 1,632 adolescents in Grades 7 through 12 in two counties in a rural western state. The FACES III Scale and the…

  2. 46 CFR 50.30-20 - Class III pressure vessels.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Class III pressure vessels. 50.30-20 Section 50.30-20... Fabrication Inspection § 50.30-20 Class III pressure vessels. (a) Class III pressure vessels shall be subject... specifically exempted by other regulations in this subchapter. (b) For Class III welded pressure vessels,...

  3. 46 CFR 50.30-20 - Class III pressure vessels.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Class III pressure vessels. 50.30-20 Section 50.30-20... Fabrication Inspection § 50.30-20 Class III pressure vessels. (a) Class III pressure vessels shall be subject... specifically exempted by other regulations in this subchapter. (b) For Class III welded pressure vessels,...

  4. 46 CFR 50.30-20 - Class III pressure vessels.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Class III pressure vessels. 50.30-20 Section 50.30-20... Fabrication Inspection § 50.30-20 Class III pressure vessels. (a) Class III pressure vessels shall be subject... specifically exempted by other regulations in this subchapter. (b) For Class III welded pressure vessels,...

  5. 46 CFR 50.30-20 - Class III pressure vessels.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Class III pressure vessels. 50.30-20 Section 50.30-20... Fabrication Inspection § 50.30-20 Class III pressure vessels. (a) Class III pressure vessels shall be subject... specifically exempted by other regulations in this subchapter. (b) For Class III welded pressure vessels,...

  6. 46 CFR 50.30-20 - Class III pressure vessels.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Class III pressure vessels. 50.30-20 Section 50.30-20... Fabrication Inspection § 50.30-20 Class III pressure vessels. (a) Class III pressure vessels shall be subject... specifically exempted by other regulations in this subchapter. (b) For Class III welded pressure vessels,...

  7. Molten-Salt-Based Growth of Group III Nitrides

    DOEpatents

    Waldrip, Karen E.; Tsao, Jeffrey Y.; Kerley, Thomas M.

    2008-10-14

    A method for growing Group III nitride materials using a molten halide salt as a solvent to solubilize the Group-III ions and nitride ions that react to form the Group III nitride material. The concentration of at least one of the nitride ion or Group III cation is determined by electrochemical generation of the ions.

  8. Teachers' Guide to Music Appreciation III A and III B in the Senior High School.

    ERIC Educational Resources Information Center

    Scott, J. Mark; Dawkins, Barbara R.

    This guide to music appreciation courses was developed for use in senior high schools in Duval County, Jacksonville, Florida. Music Appreciation III A examines the development of music, from the Gothic period through the Classical period. Music Appreciation III B examines the development of music from the Romantic period through the 1970s.…

  9. Hexaammine Complexes of Cr(III) and Co(III): A Spectral Study.

    ERIC Educational Resources Information Center

    Brown, D. R.; Pavlis, R. R.

    1985-01-01

    Procedures are provided for experiments containing complex ions with octahedral symmetry, hexaamminecobalt(III) chloride and hexaamminechromium(III) nitrate, so students can interpret fully the ultra violet/visible spectra of the complex cations in terms of the ligand field parameters, 10 "Dq," the Racah interelectron repulsion parameters, "B,"…

  10. Effects of difructose anhydride III (DFA III) administration on bile acids and growth of DFA III-assimilating bacterium Ruminococcus productus on rat intestine.

    PubMed

    Minamida, Kimiko; Kaneko, Maki; Ohashi, Midori; Sujaya, I Nengah; Sone, Teruo; Wada, Masaru; Yokota, Atsushi; Hara, Hiroshi; Asano, Kozo; Tomita, Fusao

    2005-06-01

    The growth of DFA III-assimilating bacteria in the intestines of rats fed 3% DFA III for 2 weeks was examined. Sixty-four percent of the DFA III intake had been assimilated on day 3 of ingestion, and almost all of the DFA III was assimilated at the end of the experiment. The DFA III-assimilating bacterium, Ruminococcus productus, in DFA III-fed rats was in the stationary state of 10(8)-10(9) cells/g dry feces within a week from 10(6) cells/g dry feces on day 1 of DFA III ingestion. The number of R. productus cells was associated with the amount of DFA III excreted in the feces. The acetic acid produced from DFA III by R. productus lowered the cecal pH to 5.8. In control-fed rats and DFA III-fed rats, 94% of secondary bile acids and 94% of primary bile acids, respectively, were accounted for in the total bile acids analyzed. DFA III ingestion increased the ratio of primary bile acids and changed the composition of fecal bile acids. In conclusion, R. productus assimilated DFA III, produced short chain fatty acids, and the cecal pH was lowered. The acidification of rat intestine perhaps inhibited secondary bile acid formation and decreased the ratio of secondary bile acids. Therefore, it is expected that DFA III may prevent colorectal cancer and be a new prebiotic candidate. PMID:16233830

  11. Radiation shielding design considerations for Doublet III

    SciTech Connect

    Engholm, B.A.

    1980-06-01

    Calculations and measurements were made of the bremsstrahlung (x-ray) doses resulting from runaway electron shots at Doublet III. The analysis considered direct, wall-scattered, and skyshine contributions. Reasonably good agreement was obtained between calculations and measurements. The x-ray dose in the control room was about 1 mR per runaway shot, while that at the north boundary was undetectable, with a calculated value of 0.05 mR per shot. These low doses attest to the adequacy of the 2 ft concrete shadow shield surrounding the Doublet III room. Exploratory shielding analyses were performed for possible neutron generation if Doublet III were operated with neutral beam injection in an aggressive D-D mode.

  12. Class III viral membrane fusion proteins

    PubMed Central

    Backovic, Marija

    2010-01-01

    SUMMARY Accumulating structural studies of viral fusion glycoproteins have revealed unanticipated structural relationships between unrelated virus families and allowed the grouping of these membrane fusogens into three distinct classes. Here we review the newly identified group of class III viral fusion proteins, whose members include fusion proteins from rhabdoviruses, herpesviruses and baculoviruses. While clearly related in structure, the class III viral fusion proteins exhibit distinct structural features in their architectures as well as in their membrane-interacting fusion loops, which are likely related to their virus-specific differences in cellular entry. Further study of the similarities and differences in the class III viral fusion glycoproteins may provide greater insights into protein:membrane interactions that are key to promoting efficient bilayer fusion during virus entry. PMID:19356922

  13. The Spatial Infrared Imaging Telescope III.

    NASA Astrophysics Data System (ADS)

    Bartschi, B. Y.; Morse, D. E.; Woolston, T. L.

    1996-06-01

    The Spatial Infrared Imaging Telescope III (SPIRIT III) is a mid- through long-wave infrared instrumentation package built and managed by the Space Dynamics Laboratory at Utah State University for the Midcourse Space Experiment. SPIRIT III contains a radiometer and an auto-aligning interferometer-spectrometer that share a telescope designed for high off-axis rejection. A solid-hydrogen cryostat, the first of its kind to be used in a space/satellite application, cools the entire sensor system to cryogenic operating temperatures. This hardware will measure the spectral, spatial, temporal, and intensity characteristics of Earth-limb backgrounds, celestial objects, and other upper atmospheric phenomena. Collected data will provide answers to fundamental questions about Department of Defense surveillance systems and supply invaluable information for system planners and designers of future threat detection systems.

  14. SAGE III Aerosol Extinction Validation in the Arctic Winter: Comparisons with SAGE II and POAM III

    NASA Technical Reports Server (NTRS)

    Thomason, L. W.; Poole, L. R.; Randall, C. E.

    2007-01-01

    The use of SAGE III multiwavelength aerosol extinction coefficient measurements to infer PSC type is contingent on the robustness of both the extinction magnitude and its spectral variation. Past validation with SAGE II and other similar measurements has shown that the SAGE III extinction coefficient measurements are reliable though the comparisons have been greatly weighted toward measurements made at mid-latitudes. Some aerosol comparisons made in the Arctic winter as a part of SOLVE II suggested that SAGE III values, particularly at longer wavelengths, are too small with the implication that both the magnitude and the wavelength dependence are not reliable. Comparisons with POAM III have also suggested a similar discrepancy. Herein, we use SAGE II data as a common standard for comparison of SAGE III and POAM III measurements in the Arctic winters of 2002/2003 through 2004/2005. During the winter, SAGE II measurements are made infrequently at the same latitudes as these instruments. We have mitigated this problem through the use potential vorticity as a spatial coordinate and thus greatly increased the number of coincident events. We find that SAGE II and III extinction coefficient measurements show a high degree of compatibility at both 1020 nm and 450 nm except a 10-20% bias at both wavelengths. In addition, the 452 to 1020-nm extinction ratio shows a consistent bias of approx. 30% throughout the lower stratosphere. We also find that SAGE II and POAM III are on average consistent though the comparisons show a much higher variability and larger bias than SAGE II/III comparisons. In addition, we find that the two data sets are not well correlated below 18 km. Overall, we find both the extinction values and the spectral dependence from SAGE III are robust and we find no evidence of a significant defect within the Arctic vortex.

  15. Complexation of Cm(III)/Eu(III) with Silicate in Basic Solutions

    SciTech Connect

    Wang, Zheming; Felmy, Andrew R; Xia, Yuanxian; Qafoku, Odeta; Yantasee, Wassana; Cho, Herman M

    2005-12-01

    The complexation of Cm(III) and Eu(III) with dissolved silica was studied by time resolved laser fluorescence spectroscopy (TRLFS) in basic solutions over a range of total silica concentrations and ionic strengths (NaNO3). In highly basic solutions, both the fluorescence spectra and lifetime data indicate the formation of Eu(III)/Cm(III) complexes with oligomeric silicates as well as hydroxide groups and/or nitrate in the presence of concentrated NaNO3. At high silica concentration the inner-sphere complexation caused the shift of the fluorescence spectral maximum for Cm(III)(aq) from 594 nm to up to 607 nm and a significant increase of the hypersensitive 5D0 → 7F2 band around 615 nm relative to the non-hypersensitive 5D0 → 7F1 band at 592 nm for Eu(III). At the same time, the fluorescence lifetime increased from 68 s to up to 202 s for Cm(III) in 0.1 M NaNO3 and from 115 s to 1.8 ms for Eu(III) in 3.0 M and 5.0 M NaNO3, consistent with the removal of 6 or more water molecules upon silicate complexation. Linear correlations between the spectral intensity of Cm(III) complexes and the concentrations of the dissolved silicates suggest that Cm(III) complexation with the silicate dimer, Si2O2(OH)22-, may play a role.

  16. Transcribing RNA polymerase III observed by electron cryomicroscopy.

    PubMed

    Hoffmann, Niklas A; Jakobi, Arjen J; Vorländer, Matthias K; Sachse, Carsten; Müller, Christoph W

    2016-08-01

    Electron cryomicroscopy reconstructions of elongating RNA polymerase (Pol) III at 3.9 Å resolution and of unbound Pol III (apo Pol III) in two distinct conformations at 4.6 Å and 4.7 Å resolution allow the construction of complete atomic models of Pol III and provide new functional insights into the adaption of Pol III to fulfill its specific transcription tasks. PMID:27059519

  17. Factor structure of the MCMI-III.

    PubMed

    Craig, R J; Bivens, A

    1998-02-01

    The factor structure of the Millon Clinical Multiaxial Inventory (Millon, 1994; MCMI-III) was assessed among 444 African American inpatient substance abusers and constitutes the first factor analysis of the MCMI-III. We found 3 main factors: General Maladjustment, Paranoid Behavior/Thinking With Detached Emotionality, and Antisocial Acting Out. These factors were essentially similar to previous findings of factor studies with the MCMI and MCMI-II across diverse populations. This factor invariance should lend credibility to the revised test and spur additional research into its psychometric properties. PMID:9615431

  18. Supported liquid membrane system for Cr(III) separation from Cr(III)/Cr(VI) mixtures.

    PubMed

    Religa, P; Rajewski, J; Gierycz, P; Swietlik, R

    2014-01-01

    This paper presents the results of analyses of the chromium(III) transport process from mixtures of Cr(III)/Cr(VI) ions using supported liquid membranes (SLM), in which dinonylnaphthalene sulfonic acid (DNNSA) and di(2-ethylhexyl) phosphoric acid (D2EHPA) were used as carriers. In both cases the membrane worked as a selective barrier for Cr(VI) ions. The increase in both the time of Cr(VI) ions-carrier interaction and the Cr(VI) concentration in the feed phase negatively influenced the Cr(III) separation. The polarizing layer consisting of Cr(VI) ions prevents the access of Cr(III) ions to the inter phase surface and leads to the deactivation of the carrier, which is the result of the strong oxidation properties of Cr(VI) ions. These factors meant that, in the case of the membrane with DNNSA, the membrane could not be used for the effective separation of Cr(III) from the Cr(III)/Cr(VI) mixture. On the other hand, the membrane with D2EHPA can be used for fast and efficient transport of Cr(III) ions, but only for strictly defined process parameters, i.e. where the level of chromium(VI) concentration is below 10(-3)M and with intensive feed phase mixing. PMID:24960010

  19. Photodetectors using III-V nitrides

    DOEpatents

    Moustakas, T.D.

    1998-12-08

    A bandpass photodetector using a III-V nitride and having predetermined electrical properties is disclosed. The bandpass photodetector detects electromagnetic radiation between a lower transition wavelength and an upper transition wavelength. That detector comprises two low pass photodetectors. The response of the two low pass photodetectors is subtracted to yield a response signal. 24 figs.

  20. International Space Programs. Aerospace Education III.

    ERIC Educational Resources Information Center

    Bulmer, S. B.

    This book, one in the series on Aerospace Education III, is a collection of the diverse information available regarding the international space programs. The five goals listed for the book are: to examine the Soviet space program, to understand the future of Soviet space activity, to examine other national and international space programs, to…

  1. Leveraging Information Technology. Track III: Organizational Issues.

    ERIC Educational Resources Information Center

    CAUSE, Boulder, CO.

    Seven papers from the 1987 CAUSE conference's Track III, Organizational Issues, are presented. They include: "Learning Resources and Technologies: A Unified Organizational Reorientation to Administering Educational Support Services" (Morrell D. Boone); "IRM: A Short-Lived Concept?" (James I. Penrod and Michael G. Dolence); "Organizing to Manage…

  2. ESEA Title III 1972 - PACE in Pennsylvania.

    ERIC Educational Resources Information Center

    Research and Information Services for Education, King of Prussia, PA.

    This document is a collection of abstracts of all ESEA Title III educational innovation projects funded or operating in Pennsylvania during 1972. Each abstract contains the name of the local supporting agency, the project number, financial information, target population, major objectives, activities, evaluation design, findings to date,…

  3. Academic Achievement of NCAA Division III Athletes

    ERIC Educational Resources Information Center

    Barlow, Kathy A.; Hickey, Ann

    2014-01-01

    A study of 215 athletes at a small private liberal arts Division III college revealed that athletes (a) begin their college experience with SATs no different from non-athletes; (b) attain GPAs that do not significantly differ from those of nonathletes; (c) achieve GPAs that do not significantly differ between their "in-season" semester…

  4. Perspectives of precipitation science: Part III

    NASA Astrophysics Data System (ADS)

    Michaelides, Silas

    2016-03-01

    This Special Issue of Atmospheric Research entitled "Perspectives of Precipitation Science: Part III" encompasses selected papers that were presented at the General Assembly of the European Geosciences Union, held in Vienna, Austria, from 27 April to 2 May 2014, within the framework of the (General) Session "Precipitation: Measurement, Climatology, Remote Sensing, and Modeling".

  5. Constraining the Statistics of Population III Binaries

    NASA Technical Reports Server (NTRS)

    Stacy, Athena; Bromm, Volker

    2012-01-01

    We perform a cosmological simulation in order to model the growth and evolution of Population III (Pop III) stellar systems in a range of host minihalo environments. A Pop III multiple system forms in each of the ten minihaloes, and the overall mass function is top-heavy compared to the currently observed initial mass function in the Milky Way. Using a sink particle to represent each growing protostar, we examine the binary characteristics of the multiple systems, resolving orbits on scales as small as 20 AU. We find a binary fraction of approx. 36, with semi-major axes as large as 3000 AU. The distribution of orbital periods is slightly peaked at approx. < 900 yr, while the distribution of mass ratios is relatively flat. Of all sink particles formed within the ten minihaloes, approx. 50 are lost to mergers with larger sinks, and 50 of the remaining sinks are ejected from their star-forming disks. The large binary fraction may have important implications for Pop III evolution and nucleosynthesis, as well as the final fate of the first stars.

  6. Type III functional response in Daphnia.

    PubMed

    Sarnelle, Orlando; Wilson, Alan E

    2008-06-01

    The functional response of Daphnia, a common pelagic herbivore in lakes, was assessed with a combination of secondary and meta-analyses of published data and new data from an experiment conducted using very low food levels. Secondary analyses of literature data (28 studies, n = 239-393) revealed a significant positive influence of food concentration on Daphnia clearance rate at low food levels, i.e., evidence of an overall Type III functional response. This result was not an artifact of including data from Daphnia that were exhausted from prolonged food deprivation (more than three hours at very low food). Meta-analysis of Daphnia clearance rate vs. food concentration across a range of low food concentrations (eight studies) showed a significantly positive slope across studies, which also supports the presence of a Type III response. Congruent with these analyses of published data, the feeding experiment showed clear evidence of a Type III functional response for D. pulicaria feeding on Ankistrodesmus falcatus. Food levels at which Daphnia clearance rate declined with decreasing food were near the minimum resource requirement for Daphnia population maintenance at steady state (R*). We suggest that Type III responses are more common than previously believed, perhaps because of the relative paucity of observations at low food levels, and that reduced prey mortality at low phytoplankton densities could be a stabilizing mechanism for Daphnia-phytoplankton systems under resource scarcity. PMID:18589536

  7. The Changing Nature of Division III Athletics

    ERIC Educational Resources Information Center

    Beaver, William

    2014-01-01

    Non-selective Division III institutions often face challenges in meeting their enrollment goals. To ensure their continued viability, these schools recruit large numbers of student athletes. As a result, when compared to FBS (Football Bowl Division) institutions these schools have a much higher percentage of student athletes on campus and a…

  8. Constraining the statistics of Population III binaries

    NASA Astrophysics Data System (ADS)

    Stacy, Athena; Bromm, Volker

    2013-08-01

    We perform a cosmological simulation in order to model the growth and evolution of Population III (Pop III) stellar systems in a range of host minihalo environments. A Pop III multiple system forms in each of the 10 minihaloes, and the overall mass function is top-heavy compared to the currently observed initial mass function in the Milky Way. Using a sink particle to represent each growing protostar, we examine the binary characteristics of the multiple systems, resolving orbits on scales as small as 20 au. We find a binary fraction of ˜35 per cent, with semi-major axes as large as 3000 au. The distribution of orbital periods is slightly peaked at ≲ 900 yr, while the distribution of mass ratios is relatively flat. Of all sink particles formed within the 10 minihaloes, ˜50 per cent are lost to mergers with larger sinks, and ˜50 per cent of the remaining sinks are ejected from their star-forming discs. The large binary fraction may have important implications for Pop III evolution and nucleosynthesis, as well as the final fate of the first stars.

  9. Photodetectors using III-V nitrides

    DOEpatents

    Moustakas, Theodore D.

    1998-01-01

    A bandpass photodetector using a III-V nitride and having predetermined electrical properties. The bandpass photodetector detects electromagnetic radiation between a lower transition wavelength and an upper transition wavelength. That detector comprises two low pass photodetectors. The response of the two low pass photodetectors is subtracted to yield a response signal.

  10. Estimation of the standard entropies of some Am(III) and Cm(III) compounds

    NASA Astrophysics Data System (ADS)

    Konings, R. J. M.

    2001-05-01

    The standard entropies S°(298.15 K) of some actinide(III) compounds have been estimated using a semi-empirical method describing the total entropy as the sum of the lattice entropy Slat and the excess entropy Sexs. The validity of the applied approach has been verified for the iso-electronic lanthanide(III) compounds for which a good agreement with experimental values has been obtained. The present results for the actinide(III) compounds are compared to previous estimates. Significant differences have been found, in particular for the americium compounds.

  11. Kinetics of the reaction between Pu(III) and Fe(III) in nitric acid solution

    SciTech Connect

    Koltunov, V.S.; Zhuravleva, G.I.

    1988-01-01

    The kinetics of the reaction between Pu/sup (III)/ and Fe/sup (III)/ in an aqueous nitric acid solution in the presence of persulfate ions at a constant ionic strength of the solution was studied spectrophotometrically. It was shown that the reaction is first order with respect to the reagents; its rate is practically independent of the concentration of the H/sup +/ and S/sub 2/O/sub 8//sup 2 -/ ions and with increase in the analytical HNO/sub 3/ concentration at variable ionic strength, it first increases, and then decreases. The temperature dependence of the reaction was determined, and its thermodynamic activation parameters were calculated. A possible mechanism for the reaction between Pu/sup (III)/ and Fe/sup (III)/ was proposed.

  12. The capillary pumped loop III (CAPL III) flight demonstration description and status

    NASA Astrophysics Data System (ADS)

    Kim, Jeong (Jake) H.; Cheung, Kwok-Hung; Butler, Dan; Ku, Jentung; Haught, Eric; Kroliczeck, Edward J.; Cullimore, Brent; Baumann, Jane

    1997-01-01

    To realize the full benefits of capillary pump loop (CPL) devices, for use in spacecraft thermal control subsystems, a reliable, load sharing, multiple evaporator system must be developed and successfully demonstrated in space. The Capillary Pumped Loop Flight Experiment 3 (CAPL III) will be the second attempt to flight demonstrate a multiple evaporator CPL in space environment. Using the lessons learned from CAPL I, which was flown aboard STS-60 in February 1994, new hardware and concepts are being developed for CAPL III to enable load sharing between evaporators, reliable system start-up/re-start, and reliable continuous operation. Started in May 1996, CAPL III is primarily a joint venture between the Naval Research Laboratory and the NASA-Goddard Space Flight Center, with Swales and Associates, Inc. as an industry partner. The program is scheduled to meet an STS flight opportunity in mid-1998. This paper will present the requirements and the preliminary design description of the CAPL III CPL system.

  13. Functional conservation of RNase III-like enzymes: studies on a Vibrio vulnificus ortholog of Escherichia coli RNase III.

    PubMed

    Lee, Minho; Ahn, Sangmi; Lim, Boram; Lee, Dong-Ho; Lee, Kangseok

    2014-04-01

    Bacterial ribonuclease III (RNase III) belongs to the RNase III enzyme family, which plays a pivotal role in controlling mRNA stability and RNA processing in both prokaryotes and eukaryotes. In the Vibrio vulnificus genome, one open reading frame encodes a protein homologous to E. coli RNase III, designated Vv-RNase III, which has 77.9 % amino acid identity to E. coli RNase III. Here, we report that Vv-RNase III has the same cleavage specificity as E. coli RNase III in vivo and in vitro. Expressing Vv-RNase III in E. coli cells deleted for the RNase III gene (rnc) restored normal rRNA processing and, consequently, growth rates of these cells comparable to wild-type cells. In vitro cleavage assays further showed that Vv-RNase III has the same cleavage activity and specificity as E. coli RNase III on RNase III-targeted sequences of corA and mltD mRNA. Our findings suggest that RNase III-like proteins have conserved cleavage specificity across bacterial species. PMID:24241331

  14. Theoretical insights into the separation of Am(III) over Eu(III) with PhenBHPPA.

    PubMed

    Wu, Han; Wu, Qun-Yan; Wang, Cong-Zhi; Lan, Jian-Hui; Liu, Zhi-Rong; Chai, Zhi-Fang; Shi, Wei-Qun

    2015-10-14

    Due to the similar chemical properties of actinides An(iii) and lanthanides Ln(iii), their separation in spent nuclear fuel reprocessing is extremely challenging. A 1,10-phenanthroline dipicolinamide-based ligand (PhenBHPPA) has been identified to possess a selectivity for Am(iii) over Eu(iii) and could potentially be used for group actinide extraction. In this study, quasi-relativistic density functional theoretical calculations have been used to disclose the interaction mechanisms of Am(iii) and Eu(iii) complexes with PhenBHPPA. The electronic structures, bonding nature, QTAIM (Quantum Theory of Atoms in Molecules) analyses and thermodynamic behaviors of the Am(iii) and Eu(iii) complexes with PhenBHPPA have been explored in detail. According to the Wiberg bond indices (WBIs) and QTAIM analyses, interactions between the ligand and metal cations (Am(iii) and Eu(iii)) exhibit a weakly covalent character. Thermodynamic analyses show that the charged complexes [ML(NO3)2](+) appear to be the most stable species in the complexation processes. Moreover, it is more energetically favorable for PhenBHPPA to bind to Am(iii) compared to Eu(iii). Our study could render new insights into understanding the selectivity of the ligand towards minor actinides and the separation of An(iii) from Ln(iii) via liquid-liquid extraction. PMID:26332357

  15. A XAFS study of plain and composite iron(III) and chromium(III) hydroxides.

    PubMed

    Papassiopi, N; Pinakidou, F; Katsikini, M; Antipas, G S E; Christou, C; Xenidis, A; Paloura, E C

    2014-09-01

    Reduction of hexavalent Cr(VI) to the trivalent state is the common strategy for remediation of Cr(VI) contaminated waters and soils. In the presence of Fe the resulting compounds are usually mixed Fe(III)-Cr(III) phases, while, under iron-free conditions, reduction leads to formation of plain Cr(III) hydroxides. Environmental stability of these compounds depends on their structure and is important to understand how different precipitation conditions affect the local atomic order of resulting compounds and thus their long term stability. In current study, typical Cr(VI) environmental remediation products, i.e. plain and mixed Fe(III)-Cr(III) hydroxides, were synthesized by hydrolysis and redox reactions and their structure was studied by X ray diffraction and X ray absorption fine structure techniques. Plain Cr(III) hydroxide was found to correspond to the molecular formula Cr(OH)3·3H2O and was identified as crystalline in XRD. However, the same compound when examined by EXAFS did not exhibit any clear local order in the range of EXAFS detectable distances, i.e. between 0 and 5Å. Namely, EXAFS spectroscopy detected only contribution from the first nearest neighboring (Cr-O) shell, suggesting that CrO6 octahedra interconnection is loose, in accordance with the suggested anti-bayerite structure of this compound. Mixed Fe(III)-Cr(III) systems resembled 2-line ferrihydrite irrespective of the synthesis route. Analysis of Fe-K-EXAFS and Cr-K-EXAFS spectra indicated that FeO6 octahedra are bonded by sharing both edges and corners, while CrO6 octahedra seem to prefer edge sharing linkage. EXAFS data also suggest that Fe-Cr hydroxide produced by hydrolysis presents a better arrangement of CrO6 octahedra compared to the redox product. PMID:24997915

  16. Rhodium(i), rhodium(iii) and iridium(iii) carbaporphyrins.

    PubMed

    Adiraju, Venkata A K; Ferrence, Gregory M; Lash, Timothy D

    2016-09-21

    Treatment of a benzocarbaporphyrin with [Rh(CO)2Cl]2 in refluxing dichloromethane gave a rhodium(i) dicarbonyl complex, and further reaction in refluxing pyridine afforded an organometallic rhodium(iii) derivative. The carbaporphyrin also reacted with [Ir(COD)Cl]2 and pyridine in refluxing p-xylene to generate a related iridium(iii) compound. These novel metalated porphyrinoids retained strongly diatropic characteristics and were fully characterized by XRD. PMID:27529466

  17. Characterization of Human RNA Polymerase III Identifies Orthologues for Saccharomyces cerevisiae RNA Polymerase III Subunits

    PubMed Central

    Hu, Ping; Wu, Si; Sun, Yuling; Yuan, Chih-Chi; Kobayashi, Ryuji; Myers, Michael P.; Hernandez, Nouria

    2002-01-01

    Unlike Saccharomyces cerevisiae RNA polymerase III, human RNA polymerase III has not been entirely characterized. Orthologues of the yeast RNA polymerase III subunits C128 and C37 remain unidentified, and for many of the other subunits, the available information is limited to database sequences with various degrees of similarity to the yeast subunits. We have purified an RNA polymerase III complex and identified its components. We found that two RNA polymerase III subunits, referred to as RPC8 and RPC9, displayed sequence similarity to the RNA polymerase II RPB7 and RPB4 subunits, respectively. RPC8 and RPC9 associated with each other, paralleling the association of the RNA polymerase II subunits, and were thus paralogues of RPB7 and RPB4. Furthermore, the complex contained a prominent 80-kDa polypeptide, which we called RPC5 and which corresponded to the human orthologue of the yeast C37 subunit despite limited sequence similarity. RPC5 associated with RPC53, the human orthologue of S. cerevisiae C53, paralleling the association of the S. cerevisiae C37 and C53 subunits, and was required for transcription from the type 2 VAI and type 3 human U6 promoters. Our results provide a characterization of human RNA polymerase III and show that the RPC5 subunit is essential for transcription. PMID:12391170

  18. III-V nanowire growth mechanism: V/III ratio and temperature effects.

    PubMed

    Dayeh, Shadi A; Yu, Edward T; Wang, Deli

    2007-08-01

    We have studied the dependence of Au-assisted InAs nanowire (NW) growth on InAs(111)B substrates as a function of substrate temperature and input V/III precursor ratio using organometallic vapor-phase epitaxy. Temperature-dependent growth was observed within certain temperature windows that are highly dependent on input V/III ratios. This dependence was found to be a direct consequence of the drop in NW nucleation and growth rate with increasing V/III ratio at a constant growth temperature due to depletion of indium at the NW growth sites. The growth rate was found to be determined by the local V/III ratio, which is dependent on the input precursor flow rates, growth temperature, and substrate decomposition. These studies advance understanding of the key processes involved in III-V NW growth, support the general validity of the vapor-liquid-solid growth mechanism for III-V NWs, and improve rational control over their growth morphology. PMID:17608541

  19. Adsorption behavior of Eu(III) on partially Fe(III)- or Ti(IV)-coated silica

    PubMed Central

    2012-01-01

    The adsorption behavior of Eu(III) onto silica surface, which was partially coated with Fe(III) or Ti(IV), was investigated to determine Fe(III) or Ti(IV) effects on the surface reaction of lanthanides on mineral surfaces in groundwater. Compared with a parallel uncoated silica, the Fe(III)-coated silica did not enhance the adsorption of Eu(III). However, enhanced adsorption of Eu(III) on the Ti(IV)-coated silica was observed by increasing the amount of Ti(IV) on the silica surface. PMID:22221407

  20. Hyper III on ramp, front view

    NASA Technical Reports Server (NTRS)

    1969-01-01

    The Hyper III was a low-cost test vehicle for an advanced lifting-body shape. Like the earlier M2-F1, it was a 'homebuilt' research aircraft, i.e., built at the Flight Research Center (FRC), later redesignated the Dryden Flight Research Center. It had a steel-tube frame covered with Dacron, a fiberglass nose, sheet aluminum fins, and a wing from an HP-11 sailplane. Construction was by volunteers at the FRC. Although the Hyper III was to be flown remotely in its initial tests, it was fitted with a cockpit for a pilot. On the Hyper III's only flight, it was towed aloft attached to a Navy SH-3 helicopter by a 400-foot cable. NASA research pilot Bruce Peterson flew the SH-3. After he released the Hyper III from the cable, NASA research pilot Milt Thompson flew the vehicle by radio control until the final approach when Dick Fischer took over control using a model-airplane radio-control box. The Hyper III flared, then landed and slid to a stop on Rogers Dry Lakebed. The Flight Research Center (FRC--as Dryden was named from 1959 until 1976) already had experience with testing small-scale aircraft using model-airplane techniques, but the first true remotely piloted research vehicle was the Hyper III, which flew only once in December 1969. At that time, the Center was engaged in flight research with a variety of reentry shapes called lifting bodies, and there was a desire both to expand the flight research experience with maneuverable reentry vehicles, including a high-performance, variable-geometry craft, and to investigate a remotely piloted flight research technique that made maximum use of a research pilot's skill and experience by placing him 'in the loop' as if he were in the cockpit. (There have been, as yet, no female research pilots assigned to Dryden.) The Hyper III as originally conceived was a stiletto-shaped lifting body that had resulted from a study at NASA's Langley Research Center in Hampton, Virginia. It was one of a number of hypersonic, cross

  1. Flexor tendon repair in zone III.

    PubMed

    Al-Qattan, Mohammad M

    2011-01-01

    There is a paucity of the literature on the outcome of zone III flexor tendon injuries. In this paper, we report on the results of zone III flexor tendon repair in 35 consecutive adult patients with clean cut lacerations of both flexor tendons in 42 fingers. There were 25 men and 10 women with an average age of 32 years. Repair of both flexor tendons was performed using 'figure of eight' core sutures and a continuous epitendinous suture. Postoperatively, an immediate active range of motion protocol was applied to ensure full active extension of the interphalangeal joints. The results were assessed using the Strickland-Glogovac grading system. There were no ruptures. One patient with two injured fingers developed complex regional pain syndrome and the final outcome was fair in both fingers. In the remaining 34 patients (40 fingers), 33 patients (38 fingers) had an excellent outcome and the remaining patient (two fingers) had a good outcome. PMID:20807720

  2. Luminescence of europium (III) complexes for visualization

    NASA Astrophysics Data System (ADS)

    Kolontaeva, Olga A.; Pozharov, Mikhail V.; Korolovich, Vladimir F.; Khokhlova, Anastasia R.; Kirdyanova, Anna N.; Burmistrova, Natalia A.; Zakharova, Tamara V.; Goryacheva, Irina Y.

    2016-04-01

    With the purpose to develop bright non-toxic luminescent label for theranostic application we have studied complexation of lanthanide dipicolinates (2,6-pyridinedicarboxylates) by sodium alginate and effect of thermal exposure of synthesized micro-capsules on their luminescent properties. Synthesized micro-capsules are stable in acidic medium but dissolve at pH ~ 4 due to transformation of cationic europium dipicolinate complex to anionic. Luminescence studies have shown that emission spectra of europium(III)-alginate complexes (both chloride and dipicolinate) contain two intensive bands characteristic to Eu3+ ion (5D0 --> 7F1 (590 nm) and 5D0 --> 7F1 (612 nm)). We have also found that at 160ºC europium(III)- alginate micro-capsules decompose to black, soot-like substance, therefore, their thermal treatment must be performed in closed environment (i.e., sealed ampoules).

  3. Background investigation in EDELWEISS-III

    NASA Astrophysics Data System (ADS)

    Scorza, Silvia

    2015-08-01

    Protection from and rejection of backgrounds is a key issue for the EDELWEISS-III direct dark matter detection experiment which aims at exploring the 10-9 pb cross-section region for spin-independent WIMP-nucleon interaction. The detector is located in the low radioactivity environment of the Modane Underground Laboratory and consists of 36 advanced FID germanium detectors operating at 18 mK in a dilution refrigerator in order to identify eventual rare nuclear recoils induced by elastic scattering of WIMPs from our Galactic halo. I will discuss the background and the methods of rejecting it with the FID detectors. Detector performances and the first analysis of data acquired in a long-term campaign will be presented as well. The FID detector technology is not limited to EDELWEISS-III but can further be employed in the next generation of cryogenic detector experiments.

  4. Doublet III beamline: as-built

    SciTech Connect

    Harder, C.R.; Holland, M.M.; Parker, J.W.; Gunn, J.; Resnick, L.

    1980-03-01

    In order to fully exploit Doublet III capabilities and to study new plasma physics regimes, a Neutral Beam Injector System has been constructed. Initially, a two beamline system will supply 7 MW of heat to the plasma. The system is currently being expanded to inject approx. 20 MW of power (6 beamlines). Each beamline is equipped with two Lawrence Berkeley Laboratory type rectangular ion sources with 10 cm x 40 cm extraction grids. These sources will accelerate hydrogen ions to 80 keV, with extracted beam currents in excess of 80 A per source expected. The first completed source is currently being tested and conditioned on the High Voltage Test Stand at Lawrence Livermore Laboratory. This paper pictorially reviews the as-built Doublet III neutral beamline with emphasis on component relation and configuration relative to spatial and source imposed design constraints.

  5. Mucolipidosis Type III α/β

    PubMed Central

    Kerr, Darcy A.; Memoli, Vincent A.; Cathey, Sara S.; Harris, Brent T.

    2014-01-01

    We report findings from an autopsy of a 45-year-old woman with the rare lysosomal storage disease mucolipidosis type III α/β. Her disease manifested most notably as multiple bone and cartilage problems with tracheal and bronchial malacia. Principal autopsy findings included gross abnormalities in bone and cartilage with corresponding microscopic cytoplasmic lysosomal granules. These cytoplasmic granules were also seen in histologic preparations of the brain, myocardium, heart valves, and fibroblasts of the liver and skin by light and electron microscopy. By electron microscopy there were scattered, diffuse vesicular cytoplasmic granules in neurons and glia and an increase in lysosomal structures with fine electron lucent granularity in the above tissue types. Our findings help elaborate current understanding of this disease and differentiate it from the mucopolysaccharidoses and related disorders. To our knowledge, this is the first report to document pathologic findings in a patient with mucolipidosis type III α/β by autopsy. PMID:21466370

  6. Chukar III-R Reconnaissance System

    NASA Astrophysics Data System (ADS)

    Toops, Laurence C.

    1990-02-01

    This paper describes Northrop's developmental Chukar 111-R reconnaissance system, which is based on the Chukar III target drone. Some military needs for reconnaissance and the advantages of employing an unmanned air vehicle to satisfy these needs are noted. Next, features incorporated into the new Chukar III-R reconnaissance system are described. These features include a high performance unmanned air vehicle (UAV), an infrared line scanner for imaOng targets, radio position-fix enhanced navigation, and a new mission planning and control station. Sensor slight test results, a pay-load mockup, and mission planning and image exploitation capabilities are discussed. The advantages of high speed and low observability are cited. Launch and retrieval techniques are described.

  7. Background investigation in EDELWEISS-III

    SciTech Connect

    Scorza, Silvia

    2015-08-17

    Protection from and rejection of backgrounds is a key issue for the EDELWEISS-III direct dark matter detection experiment which aims at exploring the 10{sup −9} pb cross-section region for spin-independent WIMP-nucleon interaction. The detector is located in the low radioactivity environment of the Modane Underground Laboratory and consists of 36 advanced FID germanium detectors operating at 18 mK in a dilution refrigerator in order to identify eventual rare nuclear recoils induced by elastic scattering of WIMPs from our Galactic halo. I will discuss the background and the methods of rejecting it with the FID detectors. Detector performances and the first analysis of data acquired in a long-term campaign will be presented as well. The FID detector technology is not limited to EDELWEISS-III but can further be employed in the next generation of cryogenic detector experiments.

  8. LSPRAY-III: A Lagrangian Spray Module

    NASA Technical Reports Server (NTRS)

    Raju, M. S.

    2008-01-01

    LSPRAY-III is a Lagrangian spray solver developed for application with parallel computing and unstructured grids. It is designed to be massively parallel and could easily be coupled with any existing gas-phase flow and/or Monte Carlo Probability Density Function (PDF) solvers. The solver accommodates the use of an unstructured mesh with mixed elements of either triangular, quadrilateral, and/or tetrahedral type for the gas flow grid representation. It is mainly designed to predict the flow, thermal and transport properties of a rapidly vaporizing spray because of its importance in aerospace application. The manual provides the user with an understanding of various models involved in the spray formulation, its code structure and solution algorithm, and various other issues related to parallelization and its coupling with other solvers. With the development of LSPRAY-III, we have advanced the state-of-the-art in spray computations in several important ways.

  9. MAVIS III -- A Windows 95/NT Upgrade

    SciTech Connect

    Hardwick, M.F.

    1997-12-01

    MAVIS (Modeling and Analysis of Explosive Valve Interactions) is a computer program that simulates operation of explosively actuated valve. MAVIS was originally written in Fortran in the mid 1970`s and was primarily run on the Sandia Vax computers in use through the early 1990`s. During the mid to late 1980`s MAVIS was upgraded to include the effects of plastic deformation and it became MAVIS II. When the Vax computers were retired, the Gas Transfer System (GTS) Development Department ported the code to the Macintosh and PC platforms, where it ran as a simple console application. All graphical output was lost during these ports. GTS code developers recently completed an upgrade that provides a Windows 95/NT MAVIS application and restores all of the original graphical output. This upgrade is called MAVIS III version 1.0. This report serves both as a user`s manual for MAVIS III v 1.0 and as a general software development reference.

  10. Antisites in III-V semiconductors: Density functional theory calculations

    NASA Astrophysics Data System (ADS)

    Chroneos, A.; Tahini, H. A.; Schwingenschlögl, U.; Grimes, R. W.

    2014-07-01

    Density functional based simulation, corrected for finite size effects, is used to investigate systematically the formation of antisite defects in III-V semiconductors (III = Al, Ga, and In and V = P, As, and Sb). Different charge states are modelled as a function of the Fermi level and under different growth conditions. The formation energies of group III antisites ( III V q) decrease with increasing covalent radius of the group V atom though not group III radius, whereas group V antisites ( V I I I q) show a consistent decrease in formation energies with increase in group III and group V covalent radii. In general, III V q defects dominate under III-rich conditions and V I I I q under V-rich conditions. Comparison with equivalent vacancy formation energy simulations shows that while antisite concentrations are always dominant under stoichiometric conditions, modest variation in growth or doping conditions can lead to a significantly higher concentration of vacancies.

  11. Organic coolant for ARIES-III

    SciTech Connect

    Sze, D.K. ); Sviatoslavsky, I.; Sawan, M. ); Gierszewski, P. ); Hollies, R. ); Sharafat, S. ); Herring, S. )

    1991-04-01

    ARIES-III is a D-He{sub 3} reactor design study. It is found that the organic coolant is well suited for the D-He{sub 3} reactor. This paper discusses the unique features of the D-He{sub 3} reactor, and the reason that the organic coolant is compatible with those features. The problems associated with the organic coolant are also discussed. 8 refs., 2 figs., 6 tabs.

  12. Engineering design of ARIES-III

    SciTech Connect

    Sze, D.K.; Wong, C.; Cheng, E.

    1993-07-01

    An efficient organic cooled low activation ferritic steel first wall and shield has been designed for the D-{sup 3}He power reactor ARIES-III. The design allows removal of the large surface heat load without exceeding temperature and stress design limits. The structure is expected to last for the whole reactor life. The major concerns regarding using the organic coolant in fusion reactors have been greatly alleviated.

  13. [Role of antithrombin iii in cardiac surgery].

    PubMed

    Muedra, V; Barettino, D; D'Ocón, P

    2013-11-01

    Coagulation of blood is of multidisciplinary interest. Cardiac surgery produces major changes in the delicate balance between pro-and anti-coagulant serum factors. The role of antithrombin iii has been analysed after finding evidence that associated decreased levels of protein activity to postoperative morbidity and mortality. Supplementing exogenous antithrombin is considered with the aim of optimising outcomes. Its intrinsic anticoagulant and anti-inflammatory properties have stimulated a growing interest, and suggests new lines of research. PMID:23228672

  14. Biosorption of Cr(III) and Fe(III) in single and binary systems onto pretreated orange peel.

    PubMed

    Lugo-Lugo, V; Barrera-Díaz, C; Ureña-Núñez, F; Bilyeu, B; Linares-Hernández, I

    2012-12-15

    Trivalent chromium and iron are the products of the traditional reduction of hexavalent chromium by ferrous salts in industrial wastewater. Although there have been a few studies of Cr(III) adsorption, none have considered the effect of Fe(III) on Cr(III) adsorption in a binary system representing expected products of hexavalent chromium in industrial wastewater. The biosorption of Cr(III) and Fe(III) ions onto pretreated ground orange peel in single and binary systems was studied in batch experiments using a variety of techniques. The kinetic results showed a rapid rate of biosorption of Cr(III) and Fe(III) in single and binary systems and mutual interference effects in the competitive binary Cr(III)-Fe(III) system. Second order kinetic models showed the best fit for all systems. The behavior of competitive Cr(III)-Fe(III) biosorption were successfully described by the multicomponent Langmuir model, obtaining maximum capacities for Cr(III) and Fe(III) of 9.43 and 18.19 mg/g respectively. SEM/EDS results confirmed that the metals adsorb on the surface and FTIR identified the hydroxyl groups on the carboxylic acids as the active binding sites. PMID:22892173

  15. First heterometallic Ga(III)-Dy(III) single-molecule magnets: implication of Ga(III) in extracting Fe-Dy interaction.

    PubMed

    Chen, Sihuai; Mereacre, Valeriu; Anson, Christopher E; Powell, Annie K

    2016-05-31

    The compounds of the system [M4M'2(μ3-OH)2(nbdea)4(C6H5CO2)8]·MeCN, where M = Ga(III), M' = Dy(III) (), M = Fe(III), M' = Y(III) () are isostructural to the known [Fe4Dy2] compound (). Those of the system [M4M'4(μ3-OH)4(nbdea)4(m-CH3C6H4CO2)12]·nMeCN, where M = Ga(III), M' = Dy(III), n = 4 (), M = Fe(III), M' = Y(III), n = 1 () are isostructural to the [Fe4Dy4] compound (). This allows for comparisons between single ion effects of the paramagnetic ions. The structures were determined using single crystal analysis. Magnetic susceptibility measurements reveal that the Ga(III)-Dy(III) compounds and are SMMs. The energy barrier for is close to that for the known isostructural Fe4Dy2 compound (), but with a significantly increased relaxation time. PMID:27184869

  16. Energy source of flagellar type III secretion.

    PubMed

    Paul, Koushik; Erhardt, Marc; Hirano, Takanori; Blair, David F; Hughes, Kelly T

    2008-01-24

    Bacterial flagella contain a specialized secretion apparatus that functions to deliver the protein subunits that form the filament and other structures to outside the membrane. This apparatus is related to the injectisome used by many gram-negative pathogens and symbionts to transfer effector proteins into host cells; in both systems this export mechanism is termed 'type III' secretion. The flagellar secretion apparatus comprises a membrane-embedded complex of about five proteins, and soluble factors, which include export-dedicated chaperones and an ATPase, FliI, that was thought to provide the energy for export. Here we show that flagellar secretion in Salmonella enterica requires the proton motive force (PMF) and does not require ATP hydrolysis by FliI. The export of several flagellar export substrates was prevented by treatment with the protonophore CCCP, with no accompanying decrease in cellular ATP levels. Weak swarming motility and rare flagella were observed in a mutant deleted for FliI and for the non-flagellar type-III secretion ATPases InvJ and SsaN. These findings show that the flagellar secretion apparatus functions as a proton-driven protein exporter and that ATP hydrolysis is not essential for type III secretion. PMID:18216859

  17. Dry etching of III-V nitrides

    SciTech Connect

    Pearton, S.J.; Shul, R.J.; McLane, G.F.; Constantine, C.

    1995-12-01

    The chemical inertness and high bond strengths of the III-V nitrides lead to slower plasma etching rates than for more conventional III-V semiconductors under the same conditions. High ion density conditions (>3{times}l0{sup 9}cm{sup {minus}3}) such as those obtained in ECR or magnetron reactors produce etch rates up to an order of magnitude higher than for RIE, where the ion densities are in the 10{sup 9}cm{sup {minus}3} range. We have developed smooth anisotropic dry etches for GaN, InN, AlN and their alloys based on Cl{sub 2}/CH{sub 4}/H{sub 2}/Ar, BCl{sub 3}/Ar, Cl{sub 2}/H{sub 2}, Cl{sub 2}/SF{sub 6}, HBr/H{sub 2} and HI/H{sub 2} plasma chemistries achieving etch rates up to {approximately}4,000{angstrom}/min at moderate dc bias voltages ({le}-150V). Ion-induced damage in the nitrides appears to be less apparent than in other III-V`s. One of the key remaining issues is the achievement of high selectivities for removal of one layer from another.

  18. 1,2,4-Diazaphospholide complexes of yttrium(iii), dysprosium(iii), erbium(iii), and europium(ii,iii): synthesis, X-ray structural characterization, and EPR analysis.

    PubMed

    Wang, Yongli; Guo, Wenzhen; Liu, Dongling; Yang, Ying; Zheng, Wenjun

    2016-01-21

    Several structurally characterized heteroleptic, charge-separated heterobimetallic, and polymeric alkali metal ate complexes of 1,2,4-diazaphospholide Y(iii), Dy(iii), Er(iii), Eu(iii), and Eu(ii) were prepared via the reaction of MCl3 and K[3,5-R2dp] in varied ratios at 200-220 °C (M = Y, Dy, Er, Eu; R = tBu, Ph). PMID:26666366

  19. 1,2,4-Diazaphospholide complexes of lanthanum(iii), cerium(iii), neodymium(iii), praseodymium(iii), and samarium(iii): synthesis, X-ray structural characterization, and magnetic susceptibility studies.

    PubMed

    Zhao, Minggang; Wang, Lixia; Li, Pangpang; Ma, Jianping; Zheng, Wenjun

    2016-07-01

    A few heteroleptic, charge-separated heterobimetallic, and polymeric alkali metalate complexes of 1,2,4-diazaphospholide lanthanum(iii), cerium(iii), neodymium(iii), praseodymium(iii), and samarium(iii) were simply prepared via the metathesis reaction of MCl3 (THF)m (m = 1-2) and K[3,5-R2dp] ([3,5-R2dp](-) = 3,5-di-substituent-1,2,4-diazaphospholide; R = tBu, Ph) in a varied ratio (1 : 3, 1 : 4, and 1 : 5, respectively) at room temperature in tetrahydrofuran. All the complexes were fully characterized by (1)H, (13)C{(1)H}, (31)P{(1)H}, IR, and X-ray single crystal diffraction analysis despite their paramagnetism (excluding La(iii) complexes). The structures of the complexes were found to feature varied coordination modes. The magnetic properties of several compounds were studied by magnetic susceptibility, and the complexes presented the magnetic moments close to or lower than the theoretical values for the free ions in the trivalent oxidation states (Pr(3+), Nd(3+)). PMID:27326667

  20. Korean Cultural Influences on the Millon Clinical Multiaxial Inventory III.

    ERIC Educational Resources Information Center

    Gunsalus, Ae-Jung Chang; Kelly, Kevin R.

    2001-01-01

    Investigates the effect of Korean culture on the results of the Millon Clinical Multiaxial Inventory-III (MCMI-III) by comparing profiles of 147 Korean and 132 American college students. Results indicate that MCMI-III personality profile differences exist between Korean and American college students. Discusses implications for mental health…

  1. Brazilian Adaptation of the Woodcock-Johnson III Cognitive Tests

    ERIC Educational Resources Information Center

    Wechsler, Solange Muglia; Nunes, Carlos Sancineto; Schelini, Patricia Waltz; Pasian, Sonia Regina; Homsi, Silvia Vertoni; Moretti, Lucia; Anache, Alexandra Ayach

    2010-01-01

    An adaptation of the standard battery of Woodcock-Johnson III Tests of Cognitive Abilities (WJ-III) for Brazilian children and youth was investigated. The sample was composed of 1094 students (54 percent girls), ages 7-17, living in Sao Paulo state (91 percent). Items from Brazilian school books as well as from the WJ-III Spanish version…

  2. 49 CFR 172.440 - RADIOACTIVE YELLOW-III label.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false RADIOACTIVE YELLOW-III label. 172.440 Section 172... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.440 RADIOACTIVE YELLOW-III label. (a) Except for size and color, the RADIOACTIVE YELLOW-III label must be as follows: EC02MR91.034 (b) In addition to complying...

  3. 49 CFR 172.440 - RADIOACTIVE YELLOW-III label.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false RADIOACTIVE YELLOW-III label. 172.440 Section 172... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.440 RADIOACTIVE YELLOW-III label. (a) Except for size and color, the RADIOACTIVE YELLOW-III label must be as follows: EC02MR91.034 (b) In addition to complying...

  4. 49 CFR 172.440 - RADIOACTIVE YELLOW-III label.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false RADIOACTIVE YELLOW-III label. 172.440 Section 172... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.440 RADIOACTIVE YELLOW-III label. (a) Except for size and color, the RADIOACTIVE YELLOW-III label must be as follows: EC02MR91.034 (b) In addition to complying...

  5. 49 CFR 172.440 - RADIOACTIVE YELLOW-III label.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false RADIOACTIVE YELLOW-III label. 172.440 Section 172... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.440 RADIOACTIVE YELLOW-III label. (a) Except for size and color, the RADIOACTIVE YELLOW-III label must be as follows: EC02MR91.034 (b) In addition to complying...

  6. 49 CFR 172.440 - RADIOACTIVE YELLOW-III label.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false RADIOACTIVE YELLOW-III label. 172.440 Section 172... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.440 RADIOACTIVE YELLOW-III label. (a) Except for size and color, the RADIOACTIVE YELLOW-III label must be as follows: EC02MR91.034 (b) In addition to complying...

  7. 76 FR 60511 - Amendment of Marine Safety Manual, Volume III

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-29

    ... Federal Register (73 FR 3316). Background and Purpose Chapter 16 of Volume III of the Marine Safety Manual... SECURITY Coast Guard Amendment of Marine Safety Manual, Volume III AGENCY: Coast Guard, DHS. ACTION: Notice... Offshore Units. The policy is currently found in Chapter 16 of the Marine Safety Manual, Volume III....

  8. 76 FR 33589 - Standards Improvement Project-Phase III

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-08

    ...Phase III of the Standards Improvement Project (SIP-III) is the third in a series of rulemaking actions to improve and streamline OSHA standards. The Standards Improvement Project removes or revises individual requirements within rules that are confusing, outdated, duplicative, or inconsistent. OSHA identified several requirements for SIP-III (e.g., rigging, NIOSH records, and training......

  9. 40 CFR Appendix III to Part 261 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false III Appendix III to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION AND LISTING OF HAZARDOUS WASTE Appendix III to Part 261...

  10. Microbial As(III) Oxidation in Water Treatment Plant Filters

    EPA Science Inventory

    Arsenic exists in two oxidation states in water - arsenite [As(III)] and arsenate [As(V)]. As(III) is relatively mobile in water and difficult to remove by arsenic-removal treatment processes. Source waters that contain As(III) must add a strong oxidant such as free chlorine or p...

  11. Current Use of DSM-III-R in Counselor Education.

    ERIC Educational Resources Information Center

    Ritchie, Martin H.; And Others

    1991-01-01

    Surveyed 146 counselor education programs to investigate proportion of programs that teach use of "Diagnostic and Statistical Manual of Mental Disorders-3rd Edition," revised (DSM-III-R), program tracks requiring DSM-III-R training, and differences between accredited and nonaccredited programs in DSM-III-R coverage. Found that most programs taught…

  12. Luminescent properties of europium(III) and terbium(III) complexes with para- and ortho-ethoxybenzoic acids

    NASA Astrophysics Data System (ADS)

    Panyushkin, V. T.; Mutuzova, M. Kh.; Shamsutdinova, M. Kh.

    2016-02-01

    The luminescent properties of europium(III) and terbium(III) complexes with para- and ortho-ethoxybenzoic acids are studied. The excitation energies of the triplet states of ligands are determined, a hypothesis is made about the efficient luminescence of europium(III) and terbium(III) complexes, the geometry of the coordination polyhedron of a europium complex is established, and the luminescence quantum yields of the complexes in solution are determined.

  13. [Ln(III)-Mn(II)-Ln(III)] heterometallic compounds: rare linear SMMs with divalent manganese ions.

    PubMed

    Li, Xiao-Lei; Min, Fan-Yong; Wang, Chao; Lin, Shuang-Yan; Liu, Zhiliang; Tang, Jinkui

    2015-02-21

    The reaction of Mn(OAc)2·4H2O and Ln(NO3)3·6H2O with N-(2-aminopropyl)-2-hydroxybenzamide and salicylic aldehyde in methanol/methylene dichloride produces yellow crystals of Ln2Mn(C7H5O2)8 (Ln = Gd (), Tb (), Dy (), Ho () and Er ()), in the presence of triethylamine. Three metal ions are connected by six μ2-phenolate oxygen atoms of six salicylic aldehyde ligands, resulting in perfect linear [Ln(III)-Mn(II)-Ln(III)] structures. Magnetic studies of these complexes have been performed and AC susceptibility measurements show the presence of a temperature-dependent out-of-phase ac signal for complexes and indicating single-molecule magnet (SMM) behavior. The Dy(III)2Mn(II) compound shows double relaxation pathways which may originate from the single ion behavior of individual Dy(III) ions and the weak coupling between Dy(III) and Mn(II) ions, respectively. The Ueff of 92.4(2) K is a relatively high value among 3d-4f SMMs. Moreover, complexes and represent the first linear Mn-Ln SMMs containing only divalent manganese ions as far as we know. The result suggests the positive effects of magnetic coupling to enhance their SMM behavior, presenting a promising strategy for constructing efficient heterometallic SMMs. PMID:25601415

  14. Does As(III) interact with Fe(II), Fe(III) and organic matter through ternary complexes?

    PubMed

    Catrouillet, Charlotte; Davranche, Mélanie; Dia, Aline; Bouhnik-Le Coz, Martine; Demangeat, Edwige; Gruau, Gérard

    2016-05-15

    Up until now, only a small number of studies have been dedicated to the binding processes of As(III) with organic matter (OM) via ionic Fe(III) bridges; none was interested in Fe (II). Complexation isotherms were carried out with As(III), Fe(II) or Fe(III) and Leonardite humic acid (HA). Although PHREEQC/Model VI, implemented with OM thiol groups, reproduced the experimental datasets with Fe(III), the poor fit between the experimental and modeled Fe(II) data suggested another binding mechanism for As(III) to OM. PHREEQC/Model VI was modified to take various possible As(III)-Fe(II)-OM ternary complex conformations into account. The complexation of As(III) as a mononuclear bidentate complex to a bidentate Fe(II)-HA complex was evidenced. However, the model needed to be improved since the distribution of the bidentate sites appeared to be unrealistic with regards to the published XAS data. In the presence of Fe(III), As(III) was bound to thiol groups which are more competitive with regards to the low density of formed Fe(III)-HA complexes. Based on the new data and previously published results, we propose a general scheme describing the various As(III)-Fe-MO complexes that are able to form in Fe and OM-rich waters. PMID:26939079

  15. The role of Ce(III) in BZ oscillating reactions

    NASA Astrophysics Data System (ADS)

    Nogueira, Paulo A.; Varela, Hamilton; Faria, Roberto B.

    2012-03-01

    Herein we present results on the oscillatory dynamics in the bromate-oxalic acid-acetone-Ce(III)/Ce(IV) system in batch and also in a CSTR. We show that Ce(III) is the necessary reactant to allow the emergence of oscillations. In batch, oscillations occur with Ce(III) and also with Ce(IV), but no induction period is observed with Ce(III). In a CSTR, no oscillations were found using a freshly prepared Ce(IV), but only when the cerium-containing solution was aged, allowing partial conversion of Ce(IV) to Ce(III) by reaction with acetone.

  16. Antioxidant property of quercetin-Cr(III) complex: The role of Cr(III) ion

    NASA Astrophysics Data System (ADS)

    Chen, Weijun; Sun, Shaofang; cao, Wei; Liang, Yan; Song, Jirong

    2009-01-01

    Flavonoid-metal complex is reported to exhibit a higher antioxidant activity than parent flavonoid. In this paper, experimental and theoretical methods are applied to study the antioxidant properties of quercetin and quercetin-Cr(III) complex, to find out the antioxidant activity variation and the role of Cr(III) ion on the antioxidant activity of the complex. Bond dissociation energy (BDE) and ionization potential (IP) of quercetin and the complex are calculated at the B3LYP/6-311++G(2d,2p)//B3LYP/LANL2DZ level. The experimental results show that the complex has a higher DPPH radical scavenging activity than quercetin. The calculated results show that the complex displays lower BDE and IP than quercetin. The IP of the complex declines obviously, indicating that the Cr (III) ion has more impact on the electron donating ability than on the hydrogen atom transferring ability of the complex.

  17. Redox stability of As(III) on schwertmannite surfaces.

    PubMed

    Paikaray, Susanta; Essilfie-Dughan, Joseph; Göttlicher, Jörg; Pollok, Kilian; Peiffer, Stefan

    2014-01-30

    As(III)-enriched mine discharge often drains through Fe(III)-mineral abundant land covers which makes the understanding of its fate and redox behaviour extremely important. We therefore conducted batch kinetic and equilibrium studies at pH 3.0±0.05 in anoxic media coupled with spectroscopic and microscopic examinations at variable conditions to understand possible As(III) binding mechanisms and the redox stability of As(III) on schwertmannite, a prominent ferric mineral in acid mine drainage environments. Schwertmannite acted as an efficient scavenger for As(III) compared to goethite at identical sorbent:solute ratios. As K-edge X-ray absorption near-edge structure (XANES) demonstrated partial oxidation of sorbed As(III) to As(V) on both the minerals depending on the Fe(III)/As(III) ratios (goethite acted as a better oxidant than schwertmannite). Sorbed As(III) and As(V) coordinated in a bidentate binuclear binding mechanism with As(III)/As(V)-O and As(III)/As(V)-Fe interatomic distances as 1.78/1.69 and 3.37/3.31Å, respectively. Scanning (SEM-EDX) and transmission (TEM) electron microscopic, and IR spectroscopic measurements revealed the formation of As-containing surface coatings by sorbed As on schwertmannite. PMID:24361800

  18. A deficiency of O III in the Io plasma torus

    NASA Technical Reports Server (NTRS)

    Brown, R. A.; Shemansky, D. E.; Johnson, R. E.

    1983-01-01

    Evidence for a deficiency of O III ions in the Io plasma torus is reported and implications of this deficiency for the physical processes controlling the plasma are considered. Observations of the O III 5007-A as well as Cl III and S III emissions from the Io plasma torus were made by a ground-based echelle spectrograph and intensified Reticon detector in February and May, 1981. The O III observations allow an upper limit of 4/cu cm to be placed on torus O III abundance, which is inconsistent with expectations for a low density plasma controlled by electron collisions. The inclusion of ion-ion and ion-atom charge exchange reactions and a depleted high energy electron component in the model is found to suppress O III levels, however observed limiting values are only achieved if it is assumed that the O III is kinetically hot. In addition, the charge-exchange model developed is inconsistent with previous observations of the kinetics of the S II-S III system. The present observations also establish upper limits of 2 R on 5518-A and 5538-A Cl III emission, and an emission rate of 58 + or - 40 R for the S III 6312-A line in the hot torus.

  19. Spectroscopic characterization of bioactive carboxyamide with trinuclear lanthanide (III) ions.

    PubMed

    Singh, Bibhesh K; Prakash, Anant; Adhikari, Devjani

    2009-10-15

    Complexes of La(III), Sm(III), Eu(III) and Tb(III) with bioactive carboxyamide ligands N',N''-bis(3-caboxy-1-oxophenelenyl)2-amino-N-arylbenzamidine have been synthesized and characterized by various physico-chemical techniques. Mass spectrum explains the successive degradation of the molecular species in solution and justifies ML complexes. Vibrational spectra indicate coordination of Ln(III) with amide and carboxylate oxygen of the ligand along with nitrate ions. The magnetic moment of Sm(III) and Eu(III) complexes showed slightly higher-values which originated due to low J-J separation leading to thermal population of next higher energy J levels and susceptibility due to first order Zeeman effect. The strong luminescence emitting peaks at 587 nm for Eu(III) and 543 nm for Tb(III) can be observed, which could be attributed to the ligand have an enhanced effect to the luminescence intensity of the Eu(III) and Tb(III). The thermal behaviour of complexes shows that water molecules and nitrate ion are removed in first step followed by the removal of two molecules of nitrate ions and then decomposition of the ligand molecule in subsequent step. Kinetic and thermodynamic parameters were computed from the thermal data using Coats and Redferm method, which confirm first order kinetics. PMID:19716336

  20. Selectivity of azine ligands toward lanthanide(III)/actinide(III) differentiation: a relativistic DFT based rationalization.

    PubMed

    Zaiter, Abdellah; Amine, Boudersa; Bouzidi, Yamina; Belkhiri, Lotfi; Boucekkine, Abdou; Ephritikhine, Michel

    2014-05-01

    Polyazines emerge as highly selective ligands toward actinide versus lanthanide separation. Electronic structures of several mono- and polyazine f-complexes of general formula MX3L (M(+3) = Ce, Nd, Eu, U, Am, and Cm; X = RCp(-) or NO3(-); L = N-donor ligand) related to Ln(III)/An(III) differentiation have been investigated using scalar relativistic ZORA/DFT calculations. In all cases, DFT calculations predict shorter An-N bonds than Ln-N ones whatever the azine used, in good agreement with available experimental data. The An-N bonds are also characterized by higher stretching frequencies than Ln-N bonds. The electronic structures of all species have been studied using different population analyses, among them natural population (NPA) and the quantum theory of atoms in molecule approach (QTAIM), as well as using different bond indices. The ability for Ln(III)/An(III) differentiation of the terdentate bipyrazolate BPPR ligand in the M(BPPR)(NO3)3 complexes (M(3+) = Ce, Eu, U and Am ; R = H, 2,2-dimethylpropyl) where BPP = 2,6-bis(dialkyl-1H-pyrazol-3-yl)pyridine has been studied, with a special emphasis on the total metal-ligand bonding energy (TBE). The ZORA/DFT approach was found to properly reproduce the higher selectivity of the polyazine BPP ligand compared to monoazines, especially for the Eu(III)/Am(III) pair operating in spent nuclear fuel, using computed TBEs as criterion. Moreover, the orbital part of the total bonding energy appears also to rationalize well the observed selectivity. PMID:24749559

  1. 9,10-phenanthrenesemiquinone radical complexes of ruthenium(III), osmium(III) and rhodium(III) and redox series.

    PubMed

    Biswas, Manas Kumar; Patra, Sarat Chandra; Maity, Amarendra Nath; Ke, Shyue-Chu; Weyhermüller, Thomas; Ghosh, Prasanta

    2013-05-14

    Reactions of 9,10-phenanthrenequinone (PQ) in toluene with [M(II)(PPh3)3X2] at 298 K afford green complexes, trans-[M(PQ)(PPh3)2X2] (M = Ru, X = Cl, 1; M = Os, X = Br, 2) in moderate yields. Reaction of anhydrous RhCl3 with PQ and PPh3 in boiling ethanol affords the dark brown paramagnetic complex, cis-[Rh(PQ)(PPh3)2Cl2] (3) in good yields. Diffusion of iodine solution in n-hexane to the trans-[Os(PQ) (PPh3)2(CO)(Br)] solution in CH2Cl2 generates the crystals of trans-[Os(PQ)(PPh3)2(CO)(Br)](+)I3(-), (4(+))I3(-)), in lower yields. Single crystal X-ray structure determinations of 1·2toluene, 2·CH2Cl2 and 4(+)I3(-), UV-vis/NIR absorption spectra, EPR spectra of 3, electrochemical activities and DFT calculations on 1, 2, trans-[Ru(PQ)(PMe3)2Cl2] (1Me), trans-[Os(PQ)(PMe3)2Br2] (2Me), cis-[Rh(PQ)(PMe3)2Cl2] (3Me) and their oxidized and reduced analogues including trans-[Os(PQ)(PMe3)2(CO)(Br)](+) (4Me(+)) substantiated that 1-3 are the 9,10-phenanthrenesemiquinone radical (PQ(˙-)) complexes of ruthenium(III), osmium(III) and rhodium(III) and are defined as trans/cis-[M(III)(PQ(˙-))(PPh3)2X2] with a minor contribution of the resonance form trans/cis-[M(II)(PQ)(PPh3)2X2]. Two comparatively longer C-O (1.286(4) Å) and the shorter C-C lengths (1.415(7) Å) of the OO-chelate of 1·2toluene and 2·CH2Cl2 and the isotropic fluid solution EPR signal at g = 1.999 of 3 are consistent with the existence of the reduced PQ(˙-) ligand in 1-3 complexes. Anisotropic EPR spectra of the frozen glasses (g11 = g22 = 2.0046 and g33 = 1.9874) and solids (g11 = g22 = 2.005 and g33 = 1.987) instigate the contribution of the resonance form, cis-[Rh(II)(PQ)(PPh3)2Cl2] in 3. DFT calculations established that the closed shell singlet (CSS) solutions of 1Me and 2Me are unstable due to open shell singlet (OSS) perturbation. However, the broken symmetry (BS) (1,1) Ms = 0 solutions of 1Me and 2Me are respectively 22.6 and 24.2 kJ mole(-1) lower in energy and reproduced the experimental bond

  2. Unequivocal synthetic pathway to heterodinuclear (4f,4f') complexes: magnetic study of relevant (Ln(III), Gd(III)) and (Gd(III), Ln(III)) complexes.

    PubMed

    Costes, Jean-Pierre; Nicodème, Franck

    2002-08-01

    The tripodal ligand tris[4-(2-hydroxy-3-methoxyphenyl)-3-aza-3-buten]amine (LH(3)) is capable of coordinating to two different lanthanide ions to give complexes formulated as [LLnLn'(NO(3))(3)].x H(2)O. The stepwise synthetic procedure consists of introducing first a Ln(III) ion in the inner N(4)O(3) coordination site. The isolated neutral complex LLn is then allowed to react with a second and different Ln' ion that occupies the outer O(6) site, thus yielding a [LLnLn'(NO(3))(3)].x H(2)O complex. A FAB(+) study has confirmed the existence of (Ln, Ln') entities as genuine, when the Ln' ion in the outer site has a larger ionic radius than the Ln ion in the inner site. The qualitative magnetic study of the (Gd, Ln) and (Ln, Gd) complexes, based on the comparison of the magnetic properties of (Gd, Ln) (or (Ln, Gd)) pairs and (Y, Ln) (or (Ln, La)) pairs, is very informative. Indeed, these former complexes are governed by the thermal population of the Ln(III) Stark levels and the Ln-Gd interaction, while the latter are influenced by the thermal population of the Ln(III) Stark levels. We have been able to show that a ferromagnetic interaction exists at low temperature in the (Gd, Nd), (Gd, Ce), and (Yb, Gd) complexes. In contrast, an antiferromagnetic interaction occurs in the (Dy, Gd) and (Er, Gd) complexes. Although we cannot give a quantitative value to these interactions, we can affirm that their magnitudes are weak since they are only perceptible at very low temperature. PMID:12203324

  3. Prototype studies for the CLEO III RICH

    SciTech Connect

    Kopp, S.; Artuso, M.; Efimov, A.; Gao, M.; Playfer, S.; Mountain, R.; Muheim, F.; Stone, S.

    1996-06-01

    The authors describe a prototype RICH detector that has been built as part of design work for the CLEO III RICH. Cherenkov photons are produced in a LiF radiator, and are detected in a multiwire chamber with a CaF{sub 2} entrance window containing a gas mixture of methane and TEA. Signals are read out from 2016 cathode pads using low noise Viking chips. First results from this prototype show a yield of 13 photoelectrons per image in agreement with the design studies.

  4. The III-Bi binary compounds

    NASA Astrophysics Data System (ADS)

    Keen, Benjamin

    Bismuth containing III-V alloys such as GaAsBi, GaSbBi, InSbBi and InAsBi have recently become of great interest in the development of optical devices in the infrared spectrum. Difficulties in fabricating these materials stems, in part, from the lack of experimental data on the characteristics of the III-Bi family of compounds: AlBi, GaBi, and InBi. This thesis outlines the growth conditions and characteristics of the MBE deposition of InBi. To date, InBi remains the only one of the three compounds that has been experimentally reported, and the difficulties associated with the growth of AlBi and GaBi are also described herein. InBi thin films were grown on GaAs substrates at temperatures ranging from 50 °C to 100 °C. Unlike other III-V materials, which require a group V overpressure during deposition, to achieve stoichiometric quantities of indium and bismuth an In:Bi BEP ratio of 4:3 was found to be necessary. InBi samples were studied by a variety of measurement techniques, including SEM, EDX, XRD, HAXPES, and HRTEM. Films were found to grow in a 3-D Volmer-Weber mode, forming hemispherical droplets on the substrate surface. These droplets indicated clear signs of Ostwald ripening during growth, but maintained their distribution after deposition. InBi samples are believed to be semi-metallic, confirming some of the properties predicted by density functional theory (DFT) calculations. However, analysis of the crystal structure at the substrate/droplet interface indicates the epitaxial growth of InBi is in the zinc-blende configuration, instead of the PbO configuration, in direct opposition to predictions by DFT and experimental data reported from bulk crystal studies. Attempts to grow the other III-Bi materials, GaBi and AlBi, by MBE also resulted in 3-D droplet formation, but both gallium and aluminum failed to incorporate with bismuth to form a compound. Instead, the materials formed segregated regions in the droplets, clearly visible to SEM and EDX

  5. Space Processing Applications Rocket project SPAR III

    NASA Technical Reports Server (NTRS)

    Reeves, F.

    1978-01-01

    This document presented the engineering report and science payload III test report and summarized the experiment objectives, design/operational concepts, and final results of each of five scientific experiments conducted during the third Space Processing Applications Rocket (SPAR) flight flown by NASA in December 1976. The five individual SPAR experiments, covering a wide and varied range of scientific materials processing objectives, were entitled: Liquid Mixing, Interaction of Bubbles with Solidification Interfaces, Epitaxial Growth of Single Crystal Film, Containerless Processing of Beryllium, and Contact and Coalescence of Viscous Bodies.

  6. Have We Finally Found Pop III Stars?

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2015-08-01

    Elusive Population: Population III stars — the theoretical generation of extremely metal-poor stars that should have been formed in the early universe before metals existed — have been conspicuously absent in observations. But a team led by David Sobral (Institute of Astrophysics and Space Sciences, University of Lisbon, and Leiden Observatory) may have changed this paradigm with their recent detection of an extremely bright galaxy in the early universe. The team's broad survey of distant galaxies using ESO's Very Large Telescope provides a glimpse of the universe as it was only 800 million years after the Big Bang. The survey uncovered several unusually bright galaxies — including the brightest galaxy ever seen at this distance, an important discovery by itself. But further scrutiny of this galaxy, named CR7, produced an even more exciting find: a bright pocket of the galaxy contained no sign of any metals. Follow-up with other telescopes confirmed this initial detection. Formation Waves: Sobral and his team postulate that we are observing this galaxy at just the right time to have caught a cluster of Population III stars — the bright, metal-free region of the galaxy — at the end of a wave of early star formation. The observations of CR7 also suggest the presence of regular stars in clumps around the metal-free pocket. These older, surrounding clusters may have formed stars first, helping to ionize a local bubble in the galaxy and allowing us to now observe the light from CR7. It was previously thought that Population III stars might only be found in small, dim galaxies, making them impossible for us to detect. But CR7 provides an interesting alternative: this galaxy is bright, and the candidate Population III stars are surrounded by clusters of normal stars. This suggests that these first-generation stars might in fact be easier to detect than was originally thought. Additional follow-up observations with other telescopes will help to confirm the

  7. Diluted magnetic III-V semiconductors

    NASA Astrophysics Data System (ADS)

    Munekata, H.; Ohno, H.; von Molnar, S.; Segmüller, Armin; Chang, L. L.; Esaki, L.

    1989-10-01

    A new diluted magnetic III-V semiconductor of In1-xMnxAs (x<=0.18) has been produced by molecular-beam epitaxy. Films grown at 300 °C are predominantly ferromagnetic and their properties suggest the presence of MnAs clusters. Films grown 200 °C, however, are predominantly paramagnetic, and the lattice constant decreases with increasing Mn composition; both are indicative of the formation of a homogeneous alloy. These films have n-type conductivity and reduced band gaps.

  8. III Astronomy School: the world of stars

    NASA Astrophysics Data System (ADS)

    Valdivielso, L.

    2015-05-01

    The Astronomy School is an activity organized by the Centro de Estudios de Física del Cosmos de Aragón. It is celebrated every year at the end of the summer or the beginning of autumn with the purpose of bringing Astronomy and Astrophysics to the population from an educational and a training point of view. Its III Edition, held in October 2013, has been financed by the Spanish Astronomical Society and was focused on stellar physics. This contribution describes the School and the results.

  9. Arthroscopic fixation of type III acromioclavicular dislocations.

    PubMed

    Somers, Jan F A; Van der Linden, Dietert

    2007-10-01

    Type III Acromio-Clavicular Joint dislocations can be treated successfully by surgical stabilisation in situ, with or without reconstruction of the coracoclavicular ligaments. The authors describe a simple and reliable mode of fixation, performed arthroscopically. The technique can be used for in situ fixation, or as part of an arthroscopically assisted Weaver and Dunn procedure. Using a metallic anchor loaded with a braided polyfilament suture, a strong and reliable fixation of the clavicle to the coracoid process is obtained. No hardware removal is necessary. Concomitant glenohumeral pathology can be treated simultaneously. PMID:18019910

  10. Proteome of Geobacter sulfurreducens grown with Fe(III) oxide or Fe(III) citrate as the electron acceptor.

    SciTech Connect

    Ding, Y-H R.; Hixson, Kim K.; Aklujkar, Ma; Lipton, Mary S.; Smith, Richard D.; Lovley, Derek R.; Mester, Tunde

    2008-12-01

    e(III) oxides are the most abundant source of reducible Fe(III) by microorganisms in most soils and sediments, yet few studies on the physiology of Fe(III)-reducing microorganisms during growth on Fe(III) oxide have been conducted because of the technical difficulties in working with cell growth and harvest in the presence of Fe(III) oxides. Geobacter sulfurreducens is a representative of the Geobacter species that predominate in a variety of subsurface environments in which Fe(III) oxide is important. In order to better understand the physiology of Geobacter species during growth on Fe(III) oxide, the proteome of G. sulfurreducens grown on Fe(III) oxide was compared with the proteome of cells grown with soluble Fe(III) citrate. Two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) revealed 19 proteins that were more abundant during growth on Fe(III) oxide than on soluble Fe(III). These included proteins related to protein synthesis, electron transfer and energy production, oxidative stress, protein folding, outer membrane proteins, nitrogen metabolism and hypothetical proteins. Further analysis of the proteome with the accurate mass and time (AMT) tag method revealed additional proteins associated with growth on Fe(III) oxide. These included the outer-membrane c-type cytochrome, OmcS and OmcG, which genetic studies have suggested are required for Fe(III) oxide reduction. Furthermore, several other cytochromes, as yet unstudied, were detected to be significantly up regulated during growth on Fe(III) oxide and other proteins of unknown function were more abundant during growth on Fe(III) oxide than on soluble Fe(III). PilA, the structural protein for pili, which is required for Fe(III) oxide reduction, and other pilin-associated proteins were also more abundant during growth on Fe(III) oxide. Confirmation of the differential expression of proteins known to be important in Fe(III) oxide reduction was observed, and an additional number of previously

  11. White Light Emissive Dy(III) Single-Molecule Magnets Sensitized by Diamagnetic [Co(III) (CN)6 ](3-) Linkers.

    PubMed

    Chorazy, Szymon; Rams, Michał; Nakabayashi, Koji; Sieklucka, Barbara; Ohkoshi, Shin-Ichi

    2016-05-23

    The self-assembly of Dy(III) -3-hydroxypyridine (3-OHpy) complexes with hexacyanidocobaltate(III) anions in water produces cyanido-bridged {[Dy(III) (3-OHpy)2 (H2 O)4 ] [Co(III) (CN)6 ]}⋅H2 O (1) chains. They reveal a single-molecule magnet (SMM) behavior with a large zero direct current (dc) field energy barrier, ΔE=266(12) cm(-1) (≈385 K), originating from the single-ion property of eight-coordinated Dy(III) of an elongated dodecahedral geometry, which are embedded with diamagnetic [Co(III) (CN)6 ](3-) ions into zig-zag coordination chains. The SMM character is enhanced by the external dc magnetic field, which results in the ΔE of 320(23) cm(-1) (≈460 K) at Hdc =1 kOe, and the opening of a butterfly hysteresis loop below 6 K. Complex 1 exhibits white Dy(III) -based emission realized by energy transfer from Co(III) and 3-OHpy to Dy(III) . Low temperature emission spectra were correlated with SMM property giving the estimation of the zero field ΔE. 1 is a unique example of bifunctional magneto-luminescent material combining white emission and slow magnetic relaxation with a large energy barrier, both controlled by rich structural and electronic interplay between Dy(III) , 3-OHpy, and [Co(III) (CN)6 ](3-) . PMID:26990787

  12. Defining the RNA polymerase III transcriptome: Genome-wide localization of the RNA polymerase III transcription machinery in human cells

    PubMed Central

    Canella, Donatella; Praz, Viviane; Reina, Jaime H.; Cousin, Pascal; Hernandez, Nouria

    2010-01-01

    Our view of the RNA polymerase III (Pol III) transcription machinery in mammalian cells arises mostly from studies of the RN5S (5S) gene, the Ad2 VAI gene, and the RNU6 (U6) gene, as paradigms for genes with type 1, 2, and 3 promoters. Recruitment of Pol III onto these genes requires prior binding of well-characterized transcription factors. Technical limitations in dealing with repeated genomic units, typically found at mammalian Pol III genes, have so far hampered genome-wide studies of the Pol III transcription machinery and transcriptome. We have localized, genome-wide, Pol III and some of its transcription factors. Our results reveal broad usage of the known Pol III transcription machinery and define a minimal Pol III transcriptome in dividing IMR90hTert fibroblasts. This transcriptome consists of some 500 actively transcribed genes including a few dozen candidate novel genes, of which we confirmed nine as Pol III transcription units by additional methods. It does not contain any of the microRNA genes previously described as transcribed by Pol III, but reveals two other microRNA genes, MIR886 (hsa-mir-886) and MIR1975 (RNY5, hY5, hsa-mir-1975), which are genuine Pol III transcription units. PMID:20413673

  13. Extraction Based on in situ Formation of Dithiocarbamate for Separation of Am(III) from Ln(III)

    SciTech Connect

    Miyashita, Sunao; Yanaga, Makoto; Okuno, Kenji; Suganuma, Hideo; Satoh, Isamu

    2007-07-01

    A new solvent extraction technique based on in situ extractant formation of dithiocarbamate derivatives was constructed for the purpose of separation of Am(III) from Ln(III). Ammonium salts of dithiocarbamate in this technique are formed during the extraction course by the reaction between secondary amines and carbon disulfide in organic phase. The effects of substituent of secondary amines against the behavior of in situ formation of dithiocarbamate and the distribution behaviors of Am(III) and Ln(III)(especially Eu(III)) into nitrobenzene phase using in situ formation of dithiocarbamate were investigated. It was revealed that amines containing substituent in {alpha} position of amine were not suited that for in situ extractant formation method. The values of separation factor of Am(III)/Eu(III) >10{sup 4} were obtained by the new method using five di-substituted amines/CS{sub 2}/nitrobenzene system. (authors)

  14. The influence of triplet energy levels of bridging ligands on energy transfer processes in Ir(III)/Eu(III) dyads.

    PubMed

    Jiang, Weili; Lou, Bin; Wang, Jianqiang; Lv, Hongbin; Bian, Zuqiang; Huang, Chunhui

    2011-11-21

    A series of N^N,O^O-bridging ligands based on substituted 1-(pyridin-2-yl)-3-methyl-5-pyrazolone and their corresponding heteroleptic iridium(III) complexes as well as Ir-Eu bimetallic complexes were synthesized and fully characterized. The influence of the triplet energy levels of the bridging ligands on the energy transfer (ET) process from the Ir(III) complexes to Eu(III) ions in solution was investigated at 77 K in Ir(III)/Eu(III) dyads. Photophysical experiment results show the bridging ligands play an important role in the ET process. Only when the triplet energy level of the bridging ligand was lower than the triplet metal-to-ligand charge transfer ((3)MLCT) energy level of the Ir moiety, was pure emission from the Eu(III) ion observed, implying complete ET took place from the Ir moiety to the Eu(III) ion. PMID:21931913

  15. Sources of type III solar microwave bursts

    NASA Astrophysics Data System (ADS)

    Zhdanov, Dmitriy; Lesovoi, Sergey; Tokhchukova, Susanna

    2016-06-01

    Microwave fine structures allow us to study plasma evolution in an energy release region. The Siberian Solar Radio Telescope (SSRT) is a unique instrument designed to examine fine structures at 5.7 GHz. A complex analysis of data from RATAN-600, 4-8 GHz spectropolarimeter, and SSRT, simultaneously with extreme UV data, made it possible to localize sources of III type microwave drift bursts in August 10, 2011 event within the entire frequency band of burst occurrences, as well as to determine the most probable region of primary energy release. To localize sources of III type bursts from RATAN-600 data, an original method for data processing has been worked out. At 5.7 GHz, the source of bursts was determined along two coordinates whereas at 4.5, 4.7, 4.9, 5.1, 5.3, 5.5 and 6.0 GHz, their locations were identified along one coordinate. The size of the burst source at 5.1 GHz was found to be maximum as compared to source sizes at other frequencies.

  16. Radioactivity backgrounds in ZEPLIN-III

    NASA Astrophysics Data System (ADS)

    Araújo, H. M.; Akimov, D. Yu.; Barnes, E. J.; Belov, V. A.; Bewick, A.; Burenkov, A. A.; Chepel, V.; Currie, A.; Deviveiros, L.; Edwards, B.; Ghag, C.; Hollingsworth, A.; Horn, M.; Kalmus, G. E.; Kobyakin, A. S.; Kovalenko, A. G.; Lebedenko, V. N.; Lindote, A.; Lopes, M. I.; Lüscher, R.; Majewski, P.; Murphy, A. St. J.; Neves, F.; Paling, S. M.; Pinto da Cunha, J.; Preece, R.; Quenby, J. J.; Reichhart, L.; Scovell, P. R.; Silva, C.; Solovov, V. N.; Smith, N. J. T.; Smith, P. F.; Stekhanov, V. N.; Sumner, T. J.; Thorne, C.; Walker, R. J.

    2012-03-01

    We examine electron and nuclear recoil backgrounds from radioactivity in the ZEPLIN-III dark matter experiment at Boulby. The rate of low-energy electron recoils in the liquid xenon WIMP target is 0.75 ± 0.05 events/kg/day/keV, which represents a 20-fold improvement over the rate observed during the first science run. Energy and spatial distributions agree with those predicted by component-level Monte Carlo simulations propagating the effects of the radiological contamination measured for materials employed in the experiment. Neutron elastic scattering is predicted to yield 3.05 ± 0.5 nuclear recoils with energy 5-50 keV per year, which translates to an expectation of 0.4 events in a 1 yr dataset in anti-coincidence with the veto detector for realistic signal acceptance. Less obvious background sources are discussed, especially in the context of future experiments. These include contamination of scintillation pulses with Cherenkov light from Compton electrons and from β activity internal to photomultipliers, which can increase the size and lower the apparent time constant of the scintillation response. Another challenge is posed by multiple-scatter γ-rays with one or more vertices in regions that yield no ionisation. If the discrimination power achieved in the first run can be replicated, ZEPLIN-III should reach a sensitivity of ˜1 × 10-8pb · yr to the scalar WIMP-nucleon elastic cross-section, as originally conceived.

  17. Lanthanum(III) and praseodymium(III) complexes with isatin thiosemicarbazones

    NASA Astrophysics Data System (ADS)

    Rai, Anita; Sengupta, Soumitra K.; Pandey, Om P.

    2005-09-01

    Ten new lanthanum(III) and praseodymium(III) complexes of the general formula Na[La(L) 2H 2O] (Ln = La(III) or Pr(III); LH 2 = thiosemicarbazones) derived from the condensation of isatin with 4-phenyl thiosemicarbazide, 4-(4-chlorophenyl) thiosemicarbazide, 4-(2-nitrophenyl) thiosemicarbazide, 4-(2-bromophenyl) thiosemicarbazide and 4-(2-methylphenyl) thiosemicarbazide, have been synthesized in methanol in presence of sodium hydroxide. The XRD spectra of the complexes were monitored to verify complex formation. The complexes have also been characterized by elemental analysis, molar conductance, electronic absorption and fluorescence, infrared, far infrared, 1H and 13C NMR spectral studies. Thermal studies of these complexes have been carried out in the temperature range 25-800 °C using TG, DTG and DTA techniques. All these complexes decompose gradually with the formation of Ln 2O 3 as the end product. The Judd-ofelt intensity parameter, oscillator strength, transition probability, stimulated emission cross section for different transitions of Pr 3+ for 4-phenyl thiosemicarbazones have been calculated.

  18. Electrochemistry and spectroscopy of ortho-metalated complexes of Ir(III) and Rh(III)

    SciTech Connect

    Ohsawa, Y.; Sprouse, S.; King, K.A.; DeArmond, M.K.; Hanck, K.W.; Watts, R.J.

    1987-02-26

    The electrochemical and UV-visible spectroscopic properties of Rh(III) and Ir(III) complexes of the ortho-metalating (NC) ligands, 2-phenylpyridine (ppy) and benzo(h)quinone (bzq), have been studied. Cyclic voltammetric studies of several of the dimeric species, (M(NC)/sub 2/Cl)/sub 2/, indicate metal-centered oxidation occurs at moderate potentials. Cationic monomers of the type M(NC)/sub 2/(NN)/sup +/ where (NN) = 2,2'-bipyridine or 1,10-phenanthroline have been prepared by reaction of the chelating ligands with the parent dimers. Cyclic voltammetric studies of these monomers indicate that several reversible ligand-centered reductions are generally observed and that the chelating ligand is more easily reduced than is the ortho-metalating ligand. Spectroscopic studies of the mixed ligand monomers indicate that dual emissions from MLCT states associated with the ortho-metalating and chelating ligands occur in the Ir(III) complexes whereas a single emission from a ligand-localized excited state is observed in the Rh(III) complexes. These results are discussed in terms of electronic and nuclear coupling factors analogous to those encountered in descriptions of bimolecular energy and electron-transfer processes.

  19. Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS)

    NASA Technical Reports Server (NTRS)

    Gasbarre, Joseph; Walker, Richard; Cisewski, Michael; Zawodny, Joseph; Cheek, Dianne; Thornton, Brooke

    2015-01-01

    The Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) mission will extend the SAGE data record from the ideal vantage point of the International Space Station (ISS). The ISS orbital inclination is ideal for SAGE measurements providing coverage between 70 deg north and 70 deg south latitude. The SAGE data record includes an extensively validated data set including aerosol optical depth data dating to the Stratospheric Aerosol Measurement (SAM) experiments in 1975 and 1978 and stratospheric ozone profile data dating to the Stratospheric Aerosol and Gas Experiment (SAGE) in 1979. These and subsequent data records, notably from the SAGE II experiment launched on the Earth Radiation Budget Satellite in 1984 and the SAGE III experiment launched on the Russian Meteor-3M satellite in 2001, have supported a robust, long-term assessment of key atmospheric constituents. These scientific measurements provide the basis for the analysis of five of the nine critical constituents (aerosols, ozone (O3), nitrogen dioxide (NO2), water vapor (H2O), and air density using O2) identified in the U.S. National Plan for Stratospheric Monitoring. SAGE III on ISS was originally scheduled to fly on the ISS in the same timeframe as the Meteor-3M mission, but was postponed due to delays in ISS construction. The project was re-established in 2009.

  20. Sloan Digital Sky Survey III (SDSS-III), Data Release 8

    DOE Data Explorer

    Building on the legacy of the Sloan Digital Sky Survey (SDSS) and SDSS-II, the SDSS-III Collaboration is working to map the Milky Way, search for extrasolar planets, and solve the mystery of dark energy. SDSS-III's first release, Data Release 8 (DR8), became available in the first half of 2012. DR8 contains all the images ever taken by the SDSS telescope. Together, these images make up the largest color image of the sky ever made. A version of the DR8 image is shown to the right. DR8 also includes measurements for nearly 500 million stars, galaxies, and quasars, and spectra for nearly two million. All of DR8's images, spectra, and measurements are available to anyone online. You can browse through sky images, look up data for individual objects, or search for objects anywhere using any criteria. SDSS-III will collect data from 2008 to 2014, using the 2.5-meter telescope at Apache Point Observatory. SDSS-III consists of four surveys, each focused on a different scientific theme. These four surveys are: 1) Baryon Oscillation Spectroscopic Survey (BOSS); 2) SEGUE-2 (Sloan Extension for Galactic Understanding and Exploration); 3) The APO Galactic Evolution Experiment (APOGEE); and 4) The Multi-object APO Radial Velocity Exoplanet Large-area Survey (MARVELS). [Copied with edits from http://www.sdss3.org/index.php

  1. Molecular magnets based on homometallic hexanuclear lanthanide(III) complexes.

    PubMed

    Das, Sourav; Hossain, Sakiat; Dey, Atanu; Biswas, Sourav; Sutter, Jean-Pascal; Chandrasekhar, Vadapalli

    2014-05-19

    The reaction of lanthanide(III) chloride salts (Gd(III), Dy(III), Tb(III), and Ho(III)) with the hetero donor chelating ligand N'-(2-hydroxy-3-methoxybenzylidene)-6-(hydroxymethyl)picolinohydrazide (LH3) in the presence of triethylamine afforded the hexanuclear Ln(III) complexes [{Ln6(L)2(LH)2}(μ3-OH)4][MeOH]p[H2O]q[Cl]4·xH2O·yCH3OH (1, Ln = Gd(III), p = 4, q = 4, x = 8, y = 2; 2, Ln = Dy(III), p = 2, q = 6, x = 8, y = 4; 3, Ln = Tb(III), p = 2, q = 6, x = 10, y = 4; 4, Ln = Ho(III), p = 2, q = 6, x = 10, y = 2). X-ray diffraction studies revealed that these compounds possess a hexanuclear [Ln6(OH)4](14+) core consisting of four fused [Ln3(OH)](8+) subunits. Both static (dc) and dynamic (ac) magnetic properties of 1-4 have been studied. Single-molecule magnetic behavior has been observed in compound 2 with an effective energy barrier and relaxation time pre-exponential parameters of Δ/kB = 46.2 K and τ0 = 2.85 × 10(-7) s, respectively. PMID:24766539

  2. Apoprotein C-III: A review of its clinical implications.

    PubMed

    Jin, Jing-Lu; Guo, Yuan-Lin; Li, Jian-Jun

    2016-09-01

    Apoprotein C-III (apoC-III), originating from the apoA-I/C-III/A-IV gene cluster affected by multiple regulating factors, has been demonstrated to have a validated link with hypertriglyceridemia in humans. Following genome studies establishing the impact of apoC-III on both plasma triglyceride (TG) level and cardiovascular disease (CVD), apoC-III offers us a novel explanation attempting to resolve the long-existing confusion with regard to the atherogenic effect of TG. Notably, apoC-III exerts its atherogenic effect by means of not only intervening in the function and metabolism of various lipid molecules, but also accelerating pro-inflammatory effects between monocytes and endothelial cells. Data have suggested that diabetes, a common endocrine disease, also correlates closely with apoC-III in its apoptosis process of islet βcells. In fact, apoC-III genes, with various mutations among individuals, are also found to have relevance to other diseases, including fatty liver disease. Fortunately, besides present day therapeutic strategies, such as lifestyle changes and lipid-lowering drug treatments, a promising new antisense drug specifically targeting on apoC-III gene expression opens up new avenues. This article mainly summarizes the clinical implication of apoC-III and its future directions of treatment. PMID:27318213

  3. Synthesis, characterization and stability of Cr(III) and Fe(III) hydroxides.

    PubMed

    Papassiopi, N; Vaxevanidou, K; Christou, C; Karagianni, E; Antipas, G S E

    2014-01-15

    Chromium is a common contaminant of soils and aquifers and constitutes a major environmental problem. In nature, chromium usually exists in the form of two oxidation states, trivalent, Cr(III), which is relatively innocuous for biota and for the aquatic environment, and hexavalent, Cr(VI) which is toxic, carcinogenic and very soluble. Accordingly, the majority of wastewater and groundwater treatment technologies, include a stage where Cr(VI) is reduced to Cr(III), in order to remove chromium from the aqueous phase and bind the element in the form of environmentally stable solid compounds. In the absence of iron the final product is typically of the form Cr(OH)3·xH2O whereas in the presence of iron the precipitate is a mixed Fe(1-x)Crx(OH)3 phase. In this study, we report on the synthesis, characterisation and stability of mixed (Fex,Cr1-x)(OH)3 hydroxides as compared to the stability of Cr(OH)3. We established that the plain Cr(III) hydroxide, abiding to the approximate molecular formula Cr(OH)3·3H2O, was crystalline, highly soluble, i.e. unstable, with a tendency to transform into the stable amorphous hydroxide Cr(OH)3(am) phase. Mixed Fe0.75Cr0.25(OH)3 hydroxides were found to be of the ferrihydrite structure, Fe(OH)3, and we correlated their solubility to that of a solid solution formed by plain ferrihydrite and the amorphous Cr(III) hydroxide. Both our experimental results and thermodynamic calculations indicated that mixed Fe(III)-Cr(III) hydroxides are more effective enhancers of groundwater quality, in comparison to the plain amorphous or crystalline Cr(III) hydroxides, the latter found to have a solubility typically higher than 50μg/l (maximum EU permitted Cr level in drinking water), while the amorphous Cr(OH)3(am) phase was within the drinking water threshold in the range 5.7

  4. Overview of the Stratospheric Aerosol and Gas Experiment III (SAGE III) on the International Space Station

    NASA Astrophysics Data System (ADS)

    Flittner, David; Pitts, Michael; Zawodny, Joe; Hill, Charles; Damadeo, Robert; Moore, Randy; Cisewski, Michael

    2012-07-01

    The Stratospheric Aerosol and Gas Experiment (SAGE) III is the fourth generation of solar occultation instruments operated by NASA, the first coming under a different acronym, to investigate the Earth's upper atmosphere. Three flight-ready SAGE III instruments were built by Ball Aerospace in the late 1990s, with one launched aboard the former Russian Avaiation and Space Agency (now known as Roskosmos) Meteor-3M (M3M) platform on 10 December 2001 (continuing until the platform lost power in 2006). Another of the original instruments was manifested for the International Space Station (ISS) in the 2004 time frame, but was delayed because of budgetary considerations. Fortunately, that SAGE III/ISS mission was restarted in 2009 with a major focus upon filling an anticipated gap in ozone and aerosol observations in the second half of this decade. This exciting mission utilizes contributions from both the Science Mission Directorate and the Human Exploration and Operations Mission Directorate within the National Aeronautics and Space Administration and the European Space Agency to enable scientific measurements that will provide the basis for the analysis of five of the nine critical constituents identified in the U.S. National Plan for Stratospheric Monitoring. A related paper by Anderson et al. discusses the. Presented here is an overview of the mission architecture, its implementation and the data that will be produced by SAGE III/ISS, including their expected accuracy and coverage. The 52-degree inclined orbit of the ISS is well-suited for solar occultation and provides near-global observations on a monthly basis with excellent coverage of low and mid-latitudes. This is similar to that of the SAGE II mission (1985-2005), whose data set has served the international atmospheric science community as a standard for stratospheric ozone and aerosol measurements. The nominal science products include vertical profiles of trace gases, such as ozone, nitrogen dioxide and water

  5. Synthesis of Imine-Naphthol Tripodal Ligand and Study of Its Coordination Behaviour towards Fe(III), Al(III), and Cr(III) Metal Ions

    PubMed Central

    Kaur, Kirandeep

    2014-01-01

    A hexadentate Schiff base tripodal ligand is synthesized by the condensation of tris (2-aminoethyl) amine with 2-hydroxy-1-naphthaldehyde and characterized by various spectroscopic techniques like UV-VIS, IR, NMR, MASS, and elemental analysis. The solution studies by potentiometric and spectrophotometric methods are done at 25 ± 1°C, µ = 0.1 M KCl, to calculate the protonation constants of the ligand and formation constants of metal complexes formed by the ligand with Fe(III), Al(III), and Cr(III) metal ions. The affinity of the ligand towards Fe(III) is compared with deferiprone (a drug applied for iron intoxication) and transferrin (the main Fe(III) binding protein in plasma). Structural analysis of the ligand and the metal complexes was done using semiempirical PM6 method. Electronic and IR spectra are calculated by semiempirical methods and compared with experimental one. PMID:25294978

  6. 40 CFR Table 2 to Subpart III of... - Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart III

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (40 CFR Part 63, Subpart A) to Subpart III 2 Table 2 to Subpart III of Part 63 Protection of... Pollutants for Flexible Polyurethane Foam Production Pt. 63, Subpt. III, Table 2 Table 2 to Subpart III of Part 63—Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart III Subpart...

  7. 40 CFR Table 2 to Subpart III of... - Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart III

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CFR Part 63, Subpart A) to Subpart III 2 Table 2 to Subpart III of Part 63 Protection of Environment... Flexible Polyurethane Foam Production Pt. 63, Subpt. III, Table 2 Table 2 to Subpart III of Part 63—Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart III Subpart A reference...

  8. Variation in plasmonic (electronic) spectral parameters of Pr (III) and Nd (III) with varied concentration of moderators

    SciTech Connect

    Mishra, Shubha; Limaye, S. N.

    2015-07-31

    It is said that the -4f shells behave as core and are least perturbed by changes around metal ion surrounding. However, there are evidences that-4f shells partially involved in direct moderator interaction. A systematic investigation on the plasmonic (electronic) spectral studies of some Rare Earths[RE(III).Mod] where, RE(III) = Pr(III),Nd(III) and Mod(moderator) = Y(III),La(III),Gd(III) and Lu(III), increased moderator concentration from 0.01 mol dm{sup −3} to 0.025 mol dm{sup −3} keeping the metal ion concentration at 0.01mol dm{sup −3} have been carried out. Variations in oscillator strengths (f), Judd-Ofelt parameters (T{sub λ}),inter-electronic repulsion Racah parameters (δE{sup k}),nephelauxetic ratio (β), radiative parameters (S{sub ED},A{sub T},β{sub R},T{sub R}). The values of oscillator strengths and Judd-Ofelt parameters have been discussed in the light of coordination number of RE(III) metal ions, denticity and basicity of the moderators. The [RE(III).Mod] bonding pattern has been studies in the light of the change in Racah parameters and nephelauxetic ratio.

  9. Acquired antithrombin III deficiency in patients with glomerular proteinuria.

    PubMed

    Thaler, E; Balzar, E; Kopsa, H; Pinggera, W F

    1978-01-01

    Antithrombin III (AT II/III) was determined immunologically and by means of a heparin cofactor assay in plasma samples and 24-hour urine of 15 patients with various degrees of proteinuria, being predominantly of glomerular origin. In urine the AT II/III concentrations were significantly correlated to the concentrations of albumin, plasminogen and IgG. One third of the patients had AT II/III plasma levels below the normal range. The plasma levels showed a significant inverse correlation to the AT II/III and albumin clearance rates. Similarily, the plasminogen concentrations in plasma were decreased in two thirds of the patients, being inversely correlated to the renal plasminogen clearance values. It is proposed that AT II/III deficiency in the nephrotic syndrome is an important pathogenetic factor in venous thrombosis. PMID:689489

  10. III-V nanowires and nanowire optoelectronic devices

    NASA Astrophysics Data System (ADS)

    Zhang, Yunyan; Wu, Jiang; Aagesen, Martin; Liu, Huiyun

    2015-11-01

    III-V nanowires (NWs) have been envisioned as nanoscale materials for next-generation technology with good functionality, superior performance, high integration ability and low cost, because of their special growth modes and unique 1D structure. In this review, we summarize the main challenges and important progress of the fabrication and applications of III-V NWs. We start with the III-V NW growth, that significantly influences the NW morphology and crystal quality. Attention is then given to the fabrication of some advanced III-V structures composed of axial and radial junctions. After that, we review the advantages, challenges, and major breakthroughs of using III-V NWs as solar energy harvesters and light emitters. Finally, we attempt to give a perspective look on the future development trends and the remaining challenges in the research field of III-V NWs.

  11. ORTHODONTIC TREATMENT ALTERNATIVE TO A CLASS III SUBDIVISION MALOCCLUSION

    PubMed Central

    Janson, Guilherme; de Souza, José Eduardo Prado; Barros, Sérgio Estelita Cavalcante; Andrade, Pedro; Nakamura, Alexandre Yudi

    2009-01-01

    Class III malocclusions are considered one of the most complex and difficult orthodontic problems to diagnose and treat. Skeletal and/or dental asymmetries in patients presenting with Class III malocclusions can worsen the prognosis. Recognizing the dentoalveolar and skeletal characteristics of subdivision malocclusions and their treatment possibilities is essential for a favorable nonsurgical correction. Therefore, this article presents a nonsurgical asymmetric extraction approach to Class III subdivision malocclusion treatment which can significantly improve the occlusal and facial discrepancies. PMID:19668997

  12. Apolipophorin III: a lipid-triggered molecular switch.

    PubMed

    Weers, Paul M M; Ryan, Robert O

    2003-12-01

    Apolipophorin III (apoLp-III) is a low molecular weight exchangeable apolipoprotein that plays an important role in the enhanced neutral lipid transport during insect flight. The protein exists in lipid-free and lipid-bound states. The lipid-bound state is the active form of the protein and occurs when apoLp-III associates with lipid-enriched lipophorins. ApoLp-III is well characterized in two evolutionally divergent species: Locusta migratoria and Manduca sexta. The two apolipoproteins interact in a similar manner with model phospholipid vesicles, and transform them into discoidal particles. Their low intrinsic stability in the lipid-free state likely facilitates interaction with lipid surfaces. Low solution pH also favors lipid binding interaction through increased exposure of hydrophobic surfaces on apoLp-III. While secondary structure is maintained under acidic conditions, apoLp-III tertiary structure is altered, adopting molten globule-like characteristics. In studies of apoLp-III interaction with natural lipoproteins, we found that apoLp-III is readily displaced from the surface of L. migratoria low-density lipophorin by recombinant apoLp-III proteins from either L. migratoria or M. sexta. Thus, despite important differences between these two apoLp-IIIs (amino acid sequence, presence of carbohydrate), their functional similarity is striking. This similarity is also illustrated by the recently published NMR solution structure of M. sexta apoLp-III wherein its molecular architecture closely parallels that of L. migratoria apoLp-III. PMID:14599497

  13. Neptunium(III) copper(I) diselenide

    PubMed Central

    Wells, Daniel M.; Skanthakumar, S.; Soderholm, L.; Ibers, James A.

    2009-01-01

    The title compound, NpCuSe2, is the first ternary neptunium transition-metal chalcogenide. It was synthesized from the elements at 873 K in an evacuated fused-silica tube. Single crystals were grown by vapor transport with I2. NpCuSe2 crystallizes in the LaCuS2 structure type and can be viewed as a stacking of layers of CuSe4 tetra­hedra and of double layers of NpSe7 monocapped trigonal prisms along [100]. Because there are no Se—Se bonds in the structure, the formal oxidation states of Np/Cu/Se may be assigned as +III/+I/−II, respectively. PMID:21582032

  14. Aqua-bromidobis(dimethyl-glyoximato)cobalt(III).

    PubMed

    Meera, Parthasarathy; Amutha Selvi, Madhavan; Jothi, Pachaimuthu; Dayalan, Arunachalam

    2011-04-01

    In the title complex, [CoBr(C(4)H(7)N(2)O(2))(2)(H(2)O)], a crystallo-graphic mirror plane bis-ects the mol-ecule, perpendicular to the glyoximate ligands. The geometry around the cobalt(III) atom is approximately octa-hedral with the four glyoximate N atoms forming the square base. A bromide ion and the O atom of a water mol-ecule occupy the remaining coordination sites. The N-Co-N bite angles are 82.18 (4) and 80.03 (16)°. The glyoximate moieties form strong intra-molecular O-H⋯O hydrogen bonds. The coordinated water mol-ecule forms an inter-molecular O-H⋯O hydrogen bond with a glyoximate O atom, thereby generating supra-molecular chains parallel to [010]. PMID:21753964

  15. POPULATION III GAMMA-RAY BURSTS

    SciTech Connect

    Meszaros, P.; Rees, M. J.

    2010-06-01

    We discuss a model of Poynting-dominated gamma-ray bursts from the collapse of very massive first generation (Pop. III) stars. From redshifts of order 20, the resulting relativistic jets would radiate in the hard X-ray range around 50 keV and above, followed after roughly a day by an external shock component peaking around a few keV. On the same timescales an inverse Compton component around 75 GeV may be expected, as well as a possible infrared flash. The fluences of these components would be above the threshold for detectors such as Swift and Fermi, providing potentially valuable information on the formation and properties of what may be the first luminous objects and their black holes in the high redshift universe.

  16. Propellant management operations on GSTAR-III

    NASA Astrophysics Data System (ADS)

    Oberg, D. J.; Misra, P.

    1993-06-01

    The GSTAR III satellite has depleted most of its hydrazine fuel supply, and will continue to operate with nearly empty fuel tanks for several years by allowing the inclination to grow. Temperature differentials on pairs of tanks within a half system cause the fuel to be pumped back and forth between the tanks on a daily basis. The depletion of any one tank expels helium into the lines, creating maneuver difficulties and an uncertainty in estimation of available fuel. A model of fuel flow, based on the Ideal Gas Law, has been developed to estimate the level of fuel in each tank at all times, and a thermal model of the propulsion system has been developed which uses measured temperatures to estimate convection from flowing hydrazine and verify the fuel flow model. Tank heaters have been used to control fuel distribution with apparent success.

  17. AUTOCLASS III - AUTOMATIC CLASS DISCOVERY FROM DATA

    NASA Technical Reports Server (NTRS)

    Cheeseman, P. C.

    1994-01-01

    The program AUTOCLASS III, Automatic Class Discovery from Data, uses Bayesian probability theory to provide a simple and extensible approach to problems such as classification and general mixture separation. Its theoretical basis is free from ad hoc quantities, and in particular free of any measures which alter the data to suit the needs of the program. As a result, the elementary classification model used lends itself easily to extensions. The standard approach to classification in much of artificial intelligence and statistical pattern recognition research involves partitioning of the data into separate subsets, known as classes. AUTOCLASS III uses the Bayesian approach in which classes are described by probability distributions over the attributes of the objects, specified by a model function and its parameters. The calculation of the probability of each object's membership in each class provides a more intuitive classification than absolute partitioning techniques. AUTOCLASS III is applicable to most data sets consisting of independent instances, each described by a fixed length vector of attribute values. An attribute value may be a number, one of a set of attribute specific symbols, or omitted. The user specifies a class probability distribution function by associating attribute sets with supplied likelihood function terms. AUTOCLASS then searches in the space of class numbers and parameters for the maximally probable combination. It returns the set of class probability function parameters, and the class membership probabilities for each data instance. AUTOCLASS III is written in Common Lisp, and is designed to be platform independent. This program has been successfully run on Symbolics and Explorer Lisp machines. It has been successfully used with the following implementations of Common LISP on the Sun: Franz Allegro CL, Lucid Common Lisp, and Austin Kyoto Common Lisp and similar UNIX platforms; under the Lucid Common Lisp implementations on VAX/VMS v5

  18. J/psi spectroscopy from Mark III

    SciTech Connect

    Mallik, U.

    1987-02-01

    The Mark III detector at the SPEAR e/sup +/e/sup -/ storage ring at SLAC has accumulated a data sample of 5.8 x 10/sup 6/ J/psi produced. The status of the xi(2230) observed in the radiative J/psi decay is described. The status of the glueball candidates eta(1440) (iota(1440)) and f/sub 2/(1720) (theta(1720)) are probed with a systematic comparison between the radiative and the hadronic decays of J/psi. Finally, an understanding of quark correlations is attempted from a systematic study of the J/psi decaying into Vector-Pseudoscalar, Vector-Tensor and Vector-Scalar nonets.

  19. The NATO III 5 MHz Distribution System

    NASA Technical Reports Server (NTRS)

    Vulcan, A.; Bloch, M.

    1981-01-01

    A high performance 5 MHz distribution system is described which has extremely low phase noise and jitter characteristics and provides multiple buffered outputs. The system is completely redundant with automatic switchover and is self-testing. Since the 5 MHz reference signals distributed by the NATO III distribution system are used for up-conversion and multiplicative functions, a high degree of phase stability and isolation between outputs is necessary. Unique circuit design and packaging concepts insure that the isolation between outputs is sufficient to quarantee a phase perturbation of less than 0.0016 deg when other outputs are open circuited, short circuited or terminated in 50 ohms. Circuit design techniques include high isolation cascode amplifiers. Negative feedback stabilizes system gain and minimizes circuit phase noise contributions. Balanced lines, in lieu of single ended coaxial transmission media, minimize pickup.

  20. Titan III - Commercial access to space

    NASA Astrophysics Data System (ADS)

    Gizinski, Stephen J., III; Herrington, Douglas B.

    1988-06-01

    The commercial Titan III launch vehicle is discussed, reviewing the history of the Titan program, the technical aspects of the launcher, and the market outlook. The solid rocket motors of the boost vehicle, core, attitude control system, and payload carrier are described. The vehicle can carry one or two payloads taking up a space of up to 3.65 m in diameter and 10.7 m in length. The avionics, communications, and electrical power systems of the vehicle are examined and the range of perigree stages with which the vehicle is compatible is given. An overview of the mission and the launch facilities is presented and future markets for commercial satellites are considered.

  1. Advanced Emissions Control Development Program: Phase III

    SciTech Connect

    G.T. Amrhein; R.T. Bailey; W. Downs; M.J. Holmes; G.A. Kudlac; D.A. Madden

    1999-07-01

    The primary objective of the Advanced Emissions Control Development Program (AECDP) is to develop practical, cost-effective strategies for reducing the emissions of air toxics from coal-fired boilers. The project goal is to effectively control air toxic emissions through the use of conventional flue gas clean-up equipment such as electrostatic precipitators (ESPs), fabric filters (baghouses - BH), and wet flue gas desulfurization systems (WFGD). Development work concentrated on the capture of trace metals, fine particulate, hydrogen chloride and hydrogen fluoride, with an emphasis on the control of mercury. The AECDP project is jointly funded by the US Department of Energy's Federal Energy Technology Center (DOE), the Ohio Coal Development Office within the Ohio Department of Development (OCDO), and Babcock and Wilcox, a McDermott company (B and W). This report discusses results of all three phases of the AECDP project with an emphasis on Phase III activities. Following the construction and evaluation of a representative air toxics test facility in Phase I, Phase II focused on characterization of the emissions of mercury and other air toxics and the control of these emissions for typical operating conditions of conventional flue gas clean-up equipment. Some general comments that can be made about the control of air toxics while burning a high-sulfur bituminous coal are as follows: (1) particulate control devices such as ESP's and baghouses do a good job of removing non-volatile trace metals, (2) particulate control devices (ESPs and baghouses) effectively remove the particulate-phase mercury, but the particulate-phase mercury was only a small fraction of the total for the coals tested, (3) wet scrubbing can effectively remove hydrogen chloride and hydrogen fluoride, and (4) wet scrubbers show good potential for the removal of mercury when operated under certain conditions, however, for certain applications, system enhancements can be required to achieve high

  2. Benchmark On Sensitivity Calculation (Phase III)

    SciTech Connect

    Ivanova, Tatiana; Laville, Cedric; Dyrda, James; Mennerdahl, Dennis; Golovko, Yury; Raskach, Kirill; Tsiboulia, Anatoly; Lee, Gil Soo; Woo, Sweng-Woong; Bidaud, Adrien; Patel, Amrit; Bledsoe, Keith C; Rearden, Bradley T; Gulliford, J.

    2012-01-01

    The sensitivities of the keff eigenvalue to neutron cross sections have become commonly used in similarity studies and as part of the validation algorithm for criticality safety assessments. To test calculations of the sensitivity coefficients, a benchmark study (Phase III) has been established by the OECD-NEA/WPNCS/EG UACSA (Expert Group on Uncertainty Analysis for Criticality Safety Assessment). This paper presents some sensitivity results generated by the benchmark participants using various computational tools based upon different computational methods: SCALE/TSUNAMI-3D and -1D, MONK, APOLLO2-MORET 5, DRAGON-SUSD3D and MMKKENO. The study demonstrates the performance of the tools. It also illustrates how model simplifications impact the sensitivity results and demonstrates the importance of 'implicit' (self-shielding) sensitivities. This work has been a useful step towards verification of the existing and developed sensitivity analysis methods.

  3. DECIMETRIC TYPE III BURSTS: GENERATION AND PROPAGATION

    SciTech Connect

    Li, B.; Cairns, Iver H.; Robinson, P. A.; Yan, Y. H.

    2011-09-01

    Simulations are presented for decimetric type III radio bursts at 2f{sub p} , where f{sub p} is the local electron plasma frequency. The simulations show that 2f{sub p} radiation can be observed at Earth in two scenarios for the radiation's generation and propagation. In Scenario A, radiation is produced and propagates in warm plasmas in the lower corona that are caused by previous magnetic reconnection outflows and/or chromospheric evaporation. In Scenario B radiation is generated in normal plasmas, then due to its natural directivity pattern and refraction, radiation partly propagates into nearby regions, which are hot because of previous reconnection/evaporation. The profiles of plasma density n{sub e} (r) and electron temperature T{sub e} (r) in the lower corona (r - R{sub sun} {approx}< 100 Mm) are found to be crucial to whether radiation can be produced and escape at observable levels against the effects of free-free absorption, where r is the heliocentric distance. Significantly, the observed wide ranges of radiation properties (e.g., drift rates) require n{sub e} (r) with a large range of scale heights h{sub s} , consistent nonetheless for Scenario B with short observed EUV loops. This is relevant to problems with large h{sub s} inferred from tall EUV loops. The simulations suggest: (1) n{sub e} (r) with small h{sub s} , such as n{sub e} (r){proportional_to}(r - R{sub sun}){sup -2.38} for flaring regions, are unexpectedly common deep in the corona. This result is consistent with recent work on n{sub e} (r) for r {approx} (1.05-2)R{sub sun} extracted from observed metric type IIIs. (2) The dominance of reverse-slope bursts over normal bursts sometimes observed may originate from asymmetric reconnection/acceleration, which favors downgoing beams.

  4. A possible role for chromium(III) in genotoxicity.

    PubMed Central

    Snow, E T

    1991-01-01

    Chromium is found in the environment in two major forms: reduced CrIII and CrVI, or chromate. Chromate, the most biologically active species, is readily taken up by living cells and reduced intracellularly, via reactive intermediates, to stable CrIII species. CrIII, the most abundant form of chromium in the environment, does not readily cross cell membranes and is relatively inactive in vivo. However, intracellular CrIII can react slowly with both nucleic acids and proteins and can be genotoxic. We have investigated the genotoxicity of CrIII in vitro using a DNA replication assay and in vivo by CaCl2-mediated transfection of chromium-treated DNA into Escherichia coli. When DNA replication was measured on a CrIII-treated template using purified DNA polymerases (either bacterial or mammalian), both the rate of DNA replication and the amount of incorporation per polymerase binding event (processivity) were greatly increased relative to controls. When transfected into E. coli, CrIII-treated M13mp2 bacteriophage DNA showed a dose-dependent increase in mutation frequency. These results suggest that CrIII alters the interaction between the DNA template and the polymerase such that the binding strength of the DNA polymerase is increased and the fidelity of DNA replication is decreased. These interactions may contribute to the mutagenicity of chromium ions in vivo and suggest that CrIII can contribute to chromium-mediated carcinogenesis. Images FIGURE 3. PMID:1935855

  5. Expression of Secretogranin III in Chicken Endocrine Cells

    PubMed Central

    Morikawa, Satomi; Shinmura, Naoki; Moki, Hiroaki; Yasui, Tadashi; Tsukise, Azuma; Torii, Seiji; Watanabe, Tsuyoshi; Maeda, Yoshinori; Hosaka, Masahiro

    2015-01-01

    The expression of secretogranin III (SgIII) in chicken endocrine cells has not been investigated. There is limited data available for the immunohistochemical localization of SgIII in the brain, pituitary, and pancreatic islets of humans and rodents. In the present study, we used immunoblotting to reveal the similarities between the expression patterns of SgIII in the common endocrine glands of chickens and rats. The protein–protein interactions between SgIII and chromogranin A (CgA) mediate the sorting of CgA/prohormone core aggregates to the secretory granule membrane. We examined these interactions using co-immunoprecipitation in chicken endocrine tissues. Using immunohistochemistry, we also examined the expression of SgIII in a wide range of chicken endocrine glands and gastrointestinal endocrine cells (GECs). SgIII was expressed in the pituitary, pineal, adrenal (medullary parts), parathyroid, and ultimobranchial glands, but not in the thyroid gland. It was also expressed in GECs of the stomach (proventriculus and gizzard), small and large intestines, and pancreatic islet cells. These SgIII-expressing cells co-expressed serotonin, somatostatin, gastric inhibitory polypeptide, glucagon-like peptide-1, glucagon, or insulin. These results suggest that SgIII is expressed in the endocrine cells that secrete peptide hormones, which mature via the intragranular enzymatic processing of prohormones and physiologically active amines in chickens. PMID:25673289

  6. Antisites in III-V semiconductors: Density functional theory calculations

    SciTech Connect

    Chroneos, A.; Tahini, H. A.; Schwingenschlögl, U.; Grimes, R. W.

    2014-07-14

    Density functional based simulation, corrected for finite size effects, is used to investigate systematically the formation of antisite defects in III-V semiconductors (III = Al, Ga, and In and V = P, As, and Sb). Different charge states are modelled as a function of the Fermi level and under different growth conditions. The formation energies of group III antisites (III{sub V}{sup q}) decrease with increasing covalent radius of the group V atom though not group III radius, whereas group V antisites (V{sub III}{sup q}) show a consistent decrease in formation energies with increase in group III and group V covalent radii. In general, III{sub V}{sup q} defects dominate under III-rich conditions and V{sub III}{sup q} under V-rich conditions. Comparison with equivalent vacancy formation energy simulations shows that while antisite concentrations are always dominant under stoichiometric conditions, modest variation in growth or doping conditions can lead to a significantly higher concentration of vacancies.

  7. Synthesis, characterization, molecular docking and DNA binding studies of Al(III), Ga(III) and In(III) water-soluble complexes

    NASA Astrophysics Data System (ADS)

    Shorkaei, Mohammad Ranjkesh; Asadi, Zahra; Asadi, Mozaffar

    2016-04-01

    In this work three new water-soluble aluminum(III), gallium(III) and indium(III) Schiff base complexes; Na2[M(L)NO3]; where L denotes; N,N'-bis(5-sulfosalicyliden)-1,2-phenylendiamin (salsophen) were synthesized and characterized by UV-vis, 1HNMR, FT-IR spectroscopy, thermal gravimetry (TG) and elemental analysis. To study the biological preference with the molecular target DNA, interaction of these complexes with DNA have been explored by employing various biophysical methods including absorption spectra, fluorescence spectra, cyclic voltammetry and viscosity measurement. The Kb values at 298 K were found to be 1.17 × 104 for Al(III), 1.35 × 104 for Ga(III) and 1.64 × 104 M-1 for In(III) complexes, respectively. These results suggesting the greater binding propensity of In(III) complexes. Additionally molecular docking was carried out to ascertain the mode of action towards the molecular target DNA.

  8. Selective Extraction of Americium(III) over Europium(III) with the Pyridylpyrazole Based Tetradentate Ligands: Experimental and Theoretical Study.

    PubMed

    Wang, Jieru; Su, Dongping; Wang, Dongqi; Ding, Songdong; Huang, Chao; Huang, Huang; Hu, Xiaoyang; Wang, Zhipeng; Li, Shimeng

    2015-11-16

    1,3-Bis[3-(2-pyridyl)pyrazol-1-yl]propane (Bippp) and 1,2-bis[3-(2-pyridyl)pyrazyl-1-methyl]benzene (Dbnpp), the pyridylpyrazole based tetradentate ligands, were synthesized and characterized by MS, NMR, and FT-IR. The solvent extraction and complexation behaviors of Am(III) and Eu(III) with the ligands were investigated experimentally and theoretically. In the presence of 2-bromohexanoic acid, the two ligands can effectively extract Am(III) over Eu(III) and other rare earth(III) metals (RE(III)) in HNO3 solution with the separation factors (SFAm/RE) ranging from 15 to 60. Slope analyses showed that both Am(III) and Eu(III) were extracted as monosolvated species, which agrees well with the results observed from X-ray crystallography and MS analyses. The stability constants (log K) obtained from UV-vis titration for Eu(III) complexes with Bippp and Dbnpp are 4.75 ± 0.03 and 4.45 ± 0.04, respectively. Both UV-vis titration and solvent extraction studies indicated that Bippp had stronger affinity for Eu(III) than Dbnpp, which is confirmed by density functional theory (DFT) calculations. DFT calculations revealed that the AmL(NO3)3 (L = Bippp and Dbnpp) complexes are thermodynamically more stable in water than their Eu(III) analogues, which is caused by greater covalency of the Am-N than Eu-N bonds. Theoretical studies gave an insight into the nature of the M(III)-ligand bonding interactions. PMID:26517736

  9. Preparation and spectroscopic studies of antimony(III) and bismuth(III) halodithiocarbamate derivatives

    NASA Astrophysics Data System (ADS)

    Giusti, Aleardo; Preti, Carlo; Tosi, Giuseppe; Zannini, Paolo

    1983-04-01

    The complexes of antimony(III) and bismuth(III) with piperidine (Pipdtc), morpholine (Morphdtc) and thiomorpholinedithiocarbamate (Timdtc) of general formula Sb 2-(Rdtc) 3X 3 and M(Rdtc)X 2 (M is antimony or bismuth, X a halogen and Rdtc the dithiocarbamates) have been prepared and characterized by spectroscopic methods. The IR spectra suggest that the dithiocarbamate group coordinates as a bidentate ligand; the metal-sulphur and metal-halide stretching modes have also been assigned. The spectral data are discussed and compared with those of the corresponding trisdithiocarbamate and monohalobisdithiocarbamate derivatives. The molecular weight determinations indicate that all these dithiocarbamate complexes are dimeric. Tentative stereochemistries are proposed and discussed on the basis of the results obtained.

  10. A Qualitative Study of Recovery from Type III-B and III-C Tibial Fractures

    PubMed Central

    Shauver, Melissa S.; Aravind, Maya S.; Chung, Kevin C.

    2011-01-01

    The literature has shown that long-term outcomes for both below-knee amputation and reconstruction following type III-B and III-C tibial fracture are poor. Yet, patients often report satisfaction with their treatment and/or outcomes. The aim of this study is to explore the relationship between patient outcomes and satisfaction after open tibial fractures via qualitative methodology. Twenty patients who were treated for open tibial fractures at one institution were selected using purposeful sampling and interviewed in-person in a semi-structured manner. Data were analyzed using grounded theory methodology. Despite reporting marked physical and psychosocial deficits, participants relayed high satisfaction. We hypothesize that the use adaptive coping techniques successfully reduces stress, which leads to an increase in coping self-efficacy that results in the further use of adaptive coping strategies, culminating in personal growth. This stress reduction and personal growth leads to satisfaction despite poor functional and emotional outcomes. PMID:20948418

  11. Oxalate complexation with aluminum(III) and iron(III) at moderately elevated temperatures

    SciTech Connect

    Tait, C.D.; Janecky, D.R.; Clark, D.L.; Bennett, P.C.

    1992-05-01

    To add to our understanding of the weathering of rocks in organic rich environments such as sedimentary brines and oil field waters, we have examined the temperature dependent complexation of aluminum with oxalate. Raman vibrational studies show that even the association constant for the highly charged Al(ox){sub 3}{sup 3{minus}} unexpectedly increases with moderate temperature increases to 80{degrees}C. To evaluate the potential importance of these Al-oxalate species in complex natural systems, temperature dependent competition experiments Fe(III) and Al(III) for oxalate have been initiated. Similar to aluminum, ferric oxalates show increases in association constants at higher temperatures. In competition experiments, the first association constant for Fe(ox){sup +} increases faster than that for Al(ox){sup +} to 90{degrees}C.

  12. Oxalate complexation with aluminum(III) and iron(III) at moderately elevated temperatures

    SciTech Connect

    Tait, C.D.; Janecky, D.R.; Clark, D.L. ); Bennett, P.C. . Dept. of Geological Sciences)

    1992-01-01

    To add to our understanding of the weathering of rocks in organic rich environments such as sedimentary brines and oil field waters, we have examined the temperature dependent complexation of aluminum with oxalate. Raman vibrational studies show that even the association constant for the highly charged Al(ox){sub 3}{sup 3{minus}} unexpectedly increases with moderate temperature increases to 80{degrees}C. To evaluate the potential importance of these Al-oxalate species in complex natural systems, temperature dependent competition experiments Fe(III) and Al(III) for oxalate have been initiated. Similar to aluminum, ferric oxalates show increases in association constants at higher temperatures. In competition experiments, the first association constant for Fe(ox){sup +} increases faster than that for Al(ox){sup +} to 90{degrees}C.

  13. Synthesis and Structure of Hexatungstochromate(III), [H3Cr(III)W6O24]6-.

    PubMed

    Liu, Wenjing; Lin, Zhengguo; Bassil, Bassem S; Al-Oweini, Rami; Kortz, Ulrich

    2015-01-01

    The hexatungstochromate(III) [H(3)Cr(III)W(6)O(24)](6-) (1) was synthesized in aqueous, basic medium by simple reaction of chromium(III) nitrate nonahydrate and sodium tungstate dihydrate in a 1:6 ratio. Polyanion 1 represents the first Anderson-Evans type heteropolytungstate with a trivalent hetero element. The sodium salt of 1 with the formula Na(6)[H(3)Cr(III)W(6)O(24)]·22H(2)O (1a) was fully characterized in the solid state by single crystal XRD, FT-IR spectroscopy, and thermogravimetric analysis. PMID:26507761

  14. Exceptional Oxygen Sensing Properties of New Blue Light-Excitable Highly Luminescent Europium(III) and Gadolinium(III) Complexes

    PubMed Central

    Borisov, Sergey M.; Fischer, Roland; Saf, Robert; Klimant, Ingo

    2016-01-01

    New europium(III) and gadolinium(III) complexes bearing 8-hydroxyphenalenone antenna combine efficient absorption in the blue part of the spectrum and strong emission in polymers at room temperature. The Eu(III) complexes show characteristic red luminescence whereas the Gd(III) dyes are strongly phosphorescent. The luminescence quantum yields are about 20% for the Eu(III) complexes and 50% for the Gd(III) dyes. In contrast to most state-of-the-art Eu(III) complexes the new dyes are quenched very efficiently by molecular oxygen. The luminescence decay times of the Gd(III) complexes exceed 1 ms which ensures exceptional sensitivity even in polymers of moderate oxygen permeability. These sensors are particularly suitable for trace oxygen sensing and may be good substitutes for Pd(II) porphyrins. The photophysical and sensing properties can be tuned by varying the nature of the fourth ligand. The narrow-band emission of the Eu(III) allows efficient elimination of the background light and autofluorescence and is also very attractive for use e.g. in multi-analyte sensors. The highly photostable indicators incorporated in nanoparticles are promising for imaging applications. Due to the straightforward preparation and low cost of starting materials the new dyes represent a promising alternative to the state-of-the-art oxygen indicators particularly for such applications as e.g. food packaging. PMID:27158252

  15. Soluble Manganese(III) in the Marine Environment

    NASA Astrophysics Data System (ADS)

    Luther, G. W., III; Oldham, V.; Madison, A.; Tebo, B.; Jones, M.; Jensen, L.; Owings, S.; Mucci, A.; Sundby, B.

    2014-12-01

    Recent field studies have confirmed the presence of soluble manganese(III), which along with Mn(II) passes through a 0.2 μm filter, in suboxic marine waters. Here we applied a spectrophotometric method using a soluble porphyrin as a competitive ligand to calculate the concentrations and kinetics of Mn(II) and Mn(III) recovery. Data will be presented from the suboxic porewaters of the Saint Lawrence estuary, the suboxic and anoxic waters of the Chesapeake Bay and the oxygenated surface waters of a coastal waterway bordered by wetlands and salt marshes in Delaware. Soluble Mn(III) accounts for up to 100% of the dissolved Mn pool with concentrations ranging from the detection limit of 50 nM to 80 μM at the oxic/anoxic interface of the non-sulfidic porewaters from the hemipelagic sediments of the St. Lawrence Estuary. Data indicate weak-ligand complexation of Mn(III) formed from Mn(II) oxidation as well as reduction of MnO2. Complexation of Mn(III) in the anoxic waters of Chesapeake Bay appears stronger as the porphyrin could not outcompete the natural ligands binding Mn(III). Mn(III) complexes were reduced in the presence of hydroxylamine or hydrogen sulfide and detected as Mn(II). Soluble Mn(III) comprised up to 52 % of total dissolved Mn. Profiles over the course of a five day cruise showed that high Mn(III) concentrations (7.3 μM) were observed at low H2S (4.9 μM) whereas low Mn(III) (1.1 μM) was detected at high H2S (40 μM). The presence of Mn(III) in sulfidic waters indicated that it is kinetically stabilized in situ by strong ligands so reduction to Mn(II) was incomplete. One electron reductive dissolution of solid MnO2 particles formed at the oxic-anoxic interface appear to be the source of Mn(III). Lastly, soluble Mn(III) was detected in the oxygenated surface waters of a coastal waterway (salinity ranging from freshwater to 31) bordered by wetlands and salt marshes in Delaware. Soluble Mn(III) made up 0-49 % of the total dissolved Mn (maximum of 1.92

  16. Biochemical and Structural Properties of Mouse Kynurenine Aminotransferase III

    SciTech Connect

    Han, Q.; Robinson, H; Cai, T; Tagle, D; Li, J

    2009-01-01

    Kynurenine aminotransferase III (KAT III) has been considered to be involved in the production of mammalian brain kynurenic acid (KYNA), which plays an important role in protecting neurons from overstimulation by excitatory neurotransmitters. The enzyme was identified based on its high sequence identity with mammalian KAT I, but its activity toward kynurenine and its structural characteristics have not been established. In this study, the biochemical and structural properties of mouse KAT III (mKAT III) were determined. Specifically, mKAT III cDNA was amplified from a mouse brain cDNA library, and its recombinant protein was expressed in an insect cell protein expression system. We established that mKAT III is able to efficiently catalyze the transamination of kynurenine to KYNA and has optimum activity at relatively basic conditions of around pH 9.0 and at relatively high temperatures of 50 to 60C. In addition, mKAT III is active toward a number of other amino acids. Its activity toward kynurenine is significantly decreased in the presence of methionine, histidine, glutamine, leucine, cysteine, and 3-hydroxykynurenine. Through macromolecular crystallography, we determined the mKAT III crystal structure and its structures in complex with kynurenine and glutamine. Structural analysis revealed the overall architecture of mKAT III and its cofactor binding site and active center residues. This is the first report concerning the biochemical characteristics and crystal structures of KAT III enzymes and provides a basis toward understanding the overall physiological role of mammalian KAT III in vivo and insight into regulating the levels of endogenous KYNA through modulation of the enzyme in the mouse brain.

  17. Synthesis and structural characterization of new dithiocarbamate complexes from Sb(III) and Bi(III)

    SciTech Connect

    Jamaluddin, Nur Amirah; Baba, Ibrahim

    2013-11-27

    Twenty new antimony and bismuth dithiocarbamate complexes which employed ten different type of amines have been successfully synthesized. The synthesized complexes with metal to dithiocarbamate ratio at 1:3. Elemental analysis of the complexes gave the general formula of MCl[S{sub 2}CNR’R”]{sub 2} where M = Sb(III), Bi(III); R’ = methyl, ethyl, propyl, isopropyl, butyl, sec-butyl, benzyl; R” = ethanol, methyl, ethyl, propyl, isopropyl, cyclohexyl, benzyl. The complexes were analysed by IR and NMR spectroscopy. The crystal structure of five-coordinated antimony (III) complex have been determined by X-ray single crystal diffraction. Single crystal X-ray diffraction studies on SbCl[S{sub 2}CN(C{sub 4}H{sub 9})(C{sub 2}H{sub 5})]{sub 2} adopted a triclinic system with a space group P1 with a = 10.0141(8) Å, b = 10.1394(7) Å, c = 11.8665(9) Å, α = 67.960°, β =87.616°, γ = 80.172°.

  18. Synthesis and structural characterization of new dithiocarbamate complexes from Sb(III) and Bi(III)

    NASA Astrophysics Data System (ADS)

    Jamaluddin, Nur Amirah; Baba, Ibrahim

    2013-11-01

    Twenty new antimony and bismuth dithiocarbamate complexes which employed ten different type of amines have been successfully synthesized. The synthesized complexes with metal to dithiocarbamate ratio at 1:3. Elemental analysis of the complexes gave the general formula of MCl[S2CNR'R"]2 where M = Sb(III), Bi(III); R' = methyl, ethyl, propyl, isopropyl, butyl, sec-butyl, benzyl; R" = ethanol, methyl, ethyl, propyl, isopropyl, cyclohexyl, benzyl. The complexes were analysed by IR and NMR spectroscopy. The crystal structure of five-coordinated antimony (III) complex have been determined by X-ray single crystal diffraction. Single crystal X-ray diffraction studies on SbCl[S2CN(C4H9)(C2H5)]2 adopted a triclinic system with a space group P1 with a = 10.0141(8) Å, b = 10.1394(7) Å, c = 11.8665(9) Å, α = 67.960°, β =87.616°, γ = 80.172°.

  19. Gd(III)-Gd(III) distance measurements with chirp pump pulses

    NASA Astrophysics Data System (ADS)

    Doll, Andrin; Qi, Mian; Wili, Nino; Pribitzer, Stephan; Godt, Adelheid; Jeschke, Gunnar

    2015-10-01

    The broad EPR spectrum of Gd(III) spin labels restricts the dipolar modulation depth in distance measurements between Gd(III) pairs to a few percent. To overcome this limitation, frequency-swept chirp pulses are utilized as pump pulses in the DEER experiment. Using a model system with 3.4 nm Gd-Gd distance, application of one single chirp pump pulse at Q-band frequencies leads to modulation depths beyond 10%. However, the larger modulation depth is counteracted by a reduction of the absolute echo intensity due to the pump pulse. As supported by spin dynamics simulations, this effect is primarily driven by signal loss to double-quantum coherence and specific to the Gd(III) high spin state of S = 7/2. In order to balance modulation depth and echo intensity for optimum sensitivity, a simple experimental procedure is proposed. An additional improvement by 25% in DEER sensitivity is achieved with two consecutive chirp pump pulses. These pulses pump the Gd(III) spectrum symmetrically around the observation position, therefore mutually compensating for dynamical Bloch-Siegert phase shifts at the observer spins. The improved sensitivity of the DEER data with modulation depths on the order of 20% is due to mitigation of the echo reduction effects by the consecutive pump pulses. In particular, the second pump pulse does not lead to additional signal loss if perfect inversion is assumed. Moreover, the compensation of the dynamical Bloch-Siegert phase prevents signal loss due to spatial dependence of the dynamical phase, which is caused by inhomogeneities in the driving field. The new methodology is combined with pre-polarization techniques to measure long distances up to 8.6 nm, where signal intensity and modulation depth become attenuated by long dipolar evolution windows. In addition, the influence of the zero-field splitting parameters on the echo intensity is studied with simulations. Herein, larger sensitivity is anticipated for Gd(III) complexes with zero

  20. CONVERSION EXTRACTION DESULFURIZATION (CED) PHASE III

    SciTech Connect

    James Boltz

    2005-03-01

    This project was undertaken to refine the Conversion Extraction Desulfurization (CED) technology to efficiently and economically remove sulfur from diesel fuel to levels below 15-ppm. CED is considered a generic term covering all desulfurization processes that involve oxidation and extraction. The CED process first extracts a fraction of the sulfur from the diesel, then selectively oxidizes the remaining sulfur compounds, and finally extracts these oxidized materials. The Department of Energy (DOE) awarded Petro Star Inc. a contract to fund Phase III of the CED process development. Phase III consisted of testing a continuous-flow process, optimization of the process steps, design of a pilot plant, and completion of a market study for licensing the process. Petro Star and the Degussa Corporation in coordination with Koch Modular Process Systems (KMPS) tested six key process steps in a 7.6-centimeter (cm) (3.0-inch) inside diameter (ID) column at gas oil feed rates of 7.8 to 93.3 liters per hour (l/h) (2.1 to 24.6 gallons per hour). The team verified the technical feasibility with respect to hydraulics for each unit operation tested and successfully demonstrated pre-extraction and solvent recovery distillation. Test operations conducted at KMPS demonstrated that the oxidation reaction converted a maximum of 97% of the thiophenes. The CED Process Development Team demonstrated that CED technology is capable of reducing the sulfur content of light atmospheric gas oil from 5,000-ppm to less than 15-ppm within the laboratory scale. In continuous flow trials, the CED process consistently produced fuel with approximately 20-ppm of sulfur. The process economics study calculated an estimated process cost of $5.70 per product barrel. The Kline Company performed a marketing study to evaluate the possibility of licensing the CED technology. Kline concluded that only 13 refineries harbored opportunity for the CED process. The Kline study and the research team's discussions with

  1. 77 FR 64397 - Order of Succession for HUD Region III

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-19

    ... URBAN DEVELOPMENT Order of Succession for HUD Region III AGENCY: Office of Field Policy and Management, HUD. ACTION: Notice of Order of Succession. SUMMARY: In this notice, the Assistant Deputy Secretary... Order of Succession for the Philadelphia Regional Office and its Field Offices (Region III). This...

  2. Genome sequesnce of lineage III Listeria monocytogenes strain HCC23

    Technology Transfer Automated Retrieval System (TEKTRAN)

    More than 98% of reported human listeriosis cases are caused by Listeria monocytogenes serotypes within lineages I and II. Serotypes within lineage III (4a and 4c) are commonly isolated from environmental and food specimens. We report the first complete genome sequence of a lineage III isolate, HCC2...

  3. 32 CFR 2003.3 - Functions (Article III).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 6 2014-07-01 2014-07-01 false Functions (Article III). 2003.3 Section 2003.3 National Defense Other Regulations Relating to National Defense INFORMATION SECURITY OVERSIGHT OFFICE...) BYLAWS, RULES, AND APPEAL PROCEDURES Bylaws § 2003.3 Functions (Article III). In carrying out its...

  4. 32 CFR 2003.3 - Functions (Article III).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 6 2013-07-01 2013-07-01 false Functions (Article III). 2003.3 Section 2003.3 National Defense Other Regulations Relating to National Defense INFORMATION SECURITY OVERSIGHT OFFICE...) BYLAWS, RULES, AND APPEAL PROCEDURES Bylaws § 2003.3 Functions (Article III). In carrying out its...

  5. 7. Photograph of a line drawing. 'PART III, SECTION 1, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photograph of a line drawing. 'PART III, SECTION 1, EQUIPMENT LAYOUT, BUILDING NO. 10, PRODUCER GAS & EXHAUSTER BLDG., PLANT A.' From U.S. Army Corps of Engineers. Industrial Facilities Inventory, Holston Ordnance Works, Kingsport, Tennessee. Plant A, Parts I, II, III. (Nashville, TN: Office of District Engineer, 1944). - Holston Army Ammunition Plant, Producer Gas Plant, Kingsport, Sullivan County, TN

  6. Extrapyramidal Symptoms and Medication Use in Mucopolysaccharidosis Type III

    ERIC Educational Resources Information Center

    Tchan, Michel C.; Sillence, David

    2009-01-01

    Background: We report the case of a 16-year-old male with Mucopolysaccharidosis III type A (Sanfilippo syndrome) who was commenced on risperidone for behaviour management. He rapidly developed extrapyramidal symptoms that have not resolved. Method: The medication histories of 20 patients with Mucopolysaccharidosis III seen at a Lysosomal Storage…

  7. Molecular structures of unbound and transcribing RNA polymerase III

    PubMed Central

    Hoffmann, Niklas A.; Jakobi, Arjen J.; Moreno-Morcillo, Maria; Glatt, Sebastian; Kosinski, Jan; Hagen, Wim J. H.; Sachse, Carsten; Müller, Christoph W.

    2015-01-01

    Transcription of genes encoding small structured RNAs such as tRNAs, spliceosomal U6 snRNA and ribosomal 5S RNA is carried out by RNA polymerase III (Pol III), the largest yet structurally least characterized eukaryotic RNA polymerase. The cryo-EM structures of the S. cerevisiae Pol III elongating complex at 3.9 Å resolution and the apo Pol III enzyme in two different conformations at 4.6 and 4.7 Å resolution, respectively, allow for the first time to build a 17-subunit atomic model of Pol III. The reconstructions reveal the precise orientation of the C82/C34/C31 heterotrimer in close proximity to the stalk. The C53/C37 heterodimer positions residues involved in transcription termination close to the non-template DNA strand. In the apo Pol III structures, the stalk adopts different orientations coupled with closed and open conformations of the clamp. Our results provide novel insights into Pol III-specific transcription and the adaptation of Pol III towards its small transcriptional targets. PMID:26605533

  8. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 28 2013-07-01 2013-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  9. 40 CFR Appendixes II-Iii to Part 264 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false II Appendixes II-III to Part 264 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES Appendixes II-III...

  10. Avatar Gender and Ethical Choices in "Fable III"

    ERIC Educational Resources Information Center

    Schrier, Karen

    2012-01-01

    This study investigates how players make ethical decisions in "Fable III," a video game, with consideration to avatar gender. Thirty males, 18 to 34 years old, were recruited; 20 were assigned to play "Fable III," with half assigned to play as a male avatar (Condition 1), and half assigned as a female avatar (Condition 2). Any ethical thinking…