A sensitive method for the determination of vanadium in water by electrothermal atomisation atomic absorption spectrometry (ETAAS) is described. The vanadium is chelated with 8-hydroxyquinoline in isobutyl methyl ketone and determined by ETAAS after pre-heating the pyrolytic graphite coated graphite tube of a ...

Problems and possibilities of the determination of Co in serum and urine samples by electrothermal atomic absorption spectrometry (ETAAS) are described. Optimal instrumental parameters as well as a suitable atomizer, calibration procedure and hydrogen peroxide as modifier are proposed for direct ETAAS measurement ...

A flow injection on-line sorption preconcentration system has been synchronously coupled to an electrothermal atomic absorption spectrometry (ETAAS) system for the selective determination of trace amounts of Sb(III) in water, soil and plant. The determination was achieved by selective complexation and sorption of Sb(III) with ...

John Ottaway was the Head of the Analytical Chemistry Research Group at the University of Strathclyde for almost 20 years and during that period much of the research performed by the Group was devoted to the development of improved analytical procedures for the determination of trace metals in clinical and biological samples. Although this was only one aspect of the Group's activities in ...

Monitoring both the trace element and main element content of drugs forms part of their quality control. Chromium, selenium and molybdenum were determined in therapeutic diet samples by inductively coupled plasma/mass spectrometry (ICP-MS) and electrothermal atomic absorption spectrometry (ET-AAS). Samples were ...

Atomic-absorption methods for determination of antimony at mug/g levels in rocks and sulphide ores by flame atomization (FAA) and electrothermal atomization (ETAA) have been described. The FAA method involves the separation of antimony from matrix elements by extraction as the iodide into methyl isobutyl ketone containing tri-n-octylphosphine oxide, from ...

This review focuses on the determination of uranium using spectroanalytical techniques that are aimed at total determination such as flame atomic absorption spectrometry (FAAS), electrothermal atomic absorption spectrometry (ETAAS), inductively coupled plasma optical emission ...

Analysis of the total antimony in plant material was unsuccessful using the electrothermal atomic absorption spectrometry (ETAAS) conditions recommended by the instrument manufacturer. For this reason, an optimisation procedure utilising the Plackett-Burman method, simplex optimisation and visualisation of the generated response ...

Analysis of the total antimony in plant material was unsuccessful using the electrothermal atomic absorption spectrometry (ETAAS) conditions recommended by the instrument manufacturer. For this reason, an optimisation procedure utilising the Plackett-Burman method, simplex optimisation and visualisation of the generated response ...

Gravitational field-flow fractionation (FFF) coupled to UV and ETAAS detectors has been tested for micron-size particles in the range of 5 20 ?m using three Fe-rich clay samples. The iron content estimated after aqua regia extraction was about 20 40 mg kg?1. The ETAAS analysis was performed both off-line from collected fractions and in an online continuous ...

Two methods available for direct determination of total Fe in seawater at low concentration level have been examined: electrothermal atomization atomic absorption spectrometry (ETAAS) and electrothermal atomization laser excited atomic fluorescence spectrometry (ETA-LEAFS). In a first part, we have optimized ...

A simple method is described for the determination of Cd, Cu, Mn, Ni, Pb and Zn in nails by using inductively coupled plasma mass spectrometry (ICP-MS) or electrothermal atomic absorption spectrometry (ETAAS). Prior to analysis, 10-20 mg of nail samples were accurately weighed into (15 mL) conical tubes. Then, 1 mL ...

A very simple and ligand-less cloud point extraction (CPE) methodology for the preconcentration of ultra-trace amounts of silver as a prior step to its determination by electrothermal atomic absorption spectrometry (ETAAS) has been developed. The method is based on the extraction of silver at pH 9 by using non-ionic surfactant ...

A simple and inexpensive preconcentration technique has been developed for the ultra-trace determination of lead(II) using electrothermal atomic absorption spectrometry (ETAAS). The lead(II) complex with dicyclohexano-18-crown 6-ether (DC18C6) was extracted to a small piece of cellulose acetate-type membrane filter (2 � 5 mm) merely ...

Speciation of iron in milk was carried out by high performance liquid chromatography (HPLC) and electrothermal atomic absorption spectrometry (ETAAS). Milk whey was obtained and low molecular weight protein separation was performed by size exclusion chromatography (SEC) with a TSK Gel SW glass guard (Waters) pre-column and a TSK-Gel ...

An effective and environmentally friendly single-drop microextraction method was developed for the preconcentration of ultratraces of cobalt before its determination by electrothermal atomic absorption spectrometry (ETAAS). A microdrop of 1-hexyl-3-methylimidazolium hexafluorophosphate, [C6MIM][PF6], was used to extract Co(II) ions as ...

Room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C(4)MIM][PF(6)], was used as an alternative to volatile organic solvents in single drop microextraction-electrothermal atomic absorption spectrometry (SDME-ETAAS). Manganese was extracted from aqueous solution into a drop of the ionic liquid after ...

A simple and effective hollow fiber based-liquid phase microextraction (HF-LPME) technique by using ionic liquid, 1-hexyl-3-methylimidazolium hexafluorophosphate, [C(6)MIM][PF(6)], coupled with electrothermal atomic absorption spectrometry (ETAAS) was developed for the determination of lead and nickel in environmental and biological ...

A method for the determination of the dopant concentration of tellurium in dissolved indium antimonide semiconductor material by electrothermal atomic absorption spectrometry (ETAAS) was developed. Efforts were made to investigate the optimal conditions of the furnace heating program and the effect of palladium modifier on the ...

A simple method for determining lead in fine particulates (PM2.5) by using electrothermal atomic absorption spectrometry (ETAAS) has been developed. Particulates collected on Nuclepore filter by using a dichotomous sampler were suspended in diluted nitric acid after ultrasonic agitation. The dislodging efficiency is nearly 100% after ...

Cellulose derivative resin (CDR) suspensions containing resin particles of cellulose nitrate (CDR(CN)), cellulose acetate (CDR(CA)), or cellulose triacetate (CDR(CTA)) were prepared as the sorbent for resin suspension injection (RSI) electrothermal atomic absorption spectrometry (ETAAS), in which fine resin particles holding a desired ...

A method of determining trace levels of platinum and rhodium in different samples was investigated. The method involves separation and preconcentration of the platinum and rhodium from the matrix by flow injection (FI) on-line coupled with electrothermal atomic absorption spectrometry (ETAAS) with Zeeman effect background correction. ...

A method for the determination of titanium in coal fly ash by electrothermal atomic absorption spectrometry has been developed. Palladium acetate was used as a chemical modifier. The instrumental conditions, graphite furnace program, concentration of the modifier, interferences, the calibration and standard addition graphs were studied. The limit of ...

Ultrasonic solid-liquid extraction (USLE) of trace metals from biological and environmental samples and its subsequent quantification by electrothermal atomic absorption spectrometry (ET-AAS) is nowadays an emerging methodology in the analytical laboratory. However, this methodology is far from maturity as can be readily demonstrated ...

A method was developed for the quantitative determination of total vanadium concentration in mussels via electrothermal atomic absorption spectrometry (ETAAS). After the microwave digestion of the samples, a program using temperatures of 1600 degrees C and 2600 degrees C for ashing and atomization respectively, without any matrix ...

Platinum compounds, including cis-dichlorodiaminoplatinum(II) or cisplatin, are an important class of anti-cancer drugs, which should be carefully monitored in the biological fluids. In this study, electrodeposition coupled with electrothermal atomic absorption spectrometry (ETAAS) was used for determination of Pt concentration in the ...

An analytical procedure is reported for the determination of rubidium in spent continuous ambulatory peritoneal dialysis (CAPD) fluids by flame and electrothermal atomic absorption spectrometry (FAAS, ETAAS). Samples of spent CAPD fluids were collected as 5 ml aliquots in polyethylene tubes and stored in a freezer at -20 degrees C. ...

A procedure for the speciation analysis of arsenic in fish-based baby foods is presented. Inorganic arsenic, methylarsonic acid (MA), dimethylarsinic acid (DMA) and arsenobetaine (AB) were determined by electrothermal atomic absorption spectrometry (ETAAS) using suspensions prepared in a 0.01 mol L(-1) tetramethylammonium hydroxide ...

In this work, several analytical methods are proposed for cadmium determination in Orujo spirit samples using electrothermal atomic absorption spectrometry (ETAAS). Permanent chemical modifiers thermally coated on the platforms inserted in pyrolytic graphite tubes (such as W, Ir, Ru, W-Ir and W-Ru) were comparatively studied in ...

The simultaneous multielement determination of Pb, Sn, Ni and Cu in aluminium alloys by electrothermal atomic absorption spectrometry (ETAAS) was performed by a quick method using slurry sampling. The metallic colloidal slurries were obtained by an electrical discharge operated in liquid medium. In this work, the effects of aluminium ...

Cu was determined in a wide range of petroleum products from crude oil distillation using flame atomic absorption spectrometry (FAAS), electrothermal atomic absorption spectrometry (ETAAS) and inductively coupled plasma mass spectrometry (ICP-MS). Different procedures of ...

In this work, the capabilities and limitations of solid sampling techniques laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS), wavelength dispersive X-ray fluorescence spectrometry (WD-XRFS) and solid sampling electrothermal atomic absorption spectrometry (SS-ETAAS) for ...

Different sample pre-treatments for seafood products have been compared with determine trace elements (As, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Se and Zn) by flame atomic absorption spectrometry (FAAS) and electrothermal atomic absorption spectrometry (ETAAS). Classic pre-treatments as microwave ...

A four-stage sequential extraction procedure for the speciation of nickel has been applied to ambient aerosol samples. The determination of the soluble, sulfidic, metallic and oxidic Ni fractions in particulate matter was carried out by graphite furnace (electrothermal) atomic absorption spectrometry (ETAAS) and inductively coupled ...

In this work, the microsampling nature of tungsten coil electrothermal vaporization Ar/H(2) flame atomic fluorescence spectrometry (W-coil ETV-AFS) as well as tungsten coil electrothermal atomic absorption spectrometry (W-coil ET-AAS) was used with cloud point extraction (CPE) for the ultrasensitive determination ...

A novel method for the separation and preconcentration of Cr(III)/Cr(VI) with Lemna minor and determination by slurry atomization electrothermal atomic absorption spectrometry (ETAAS) was developed. A sample solution was added to a polyethylene beaker containing 10 mg of 160 mesh pre-treated Lemna minor, adjusted to pH 1.0, stirred for ...

Graphite filter atomizers (GFA) for electrothermal atomic absorption spectrometry (ETAAS) show substantial advantages over commonly employed electrothermal vaporizers and atomizers, tube and platform furnaces, for direct determination of high and medium volatility elements in matrices associated with strong spectral and chemical ...

The study introduces a new simple and highly sensitive method for headspace solid phase microextraction (HS-SPME) coupled with electrothermal atomic absorption spectrometric determination of mercury. In the proposed method, a gold wire, mounted in the headspace of a sample solution in a sealed bottle, is used for collection of mercury vapor generated by addition of sodium ...

A rapid and simple method for separation and determination of tributyltin (TBT) in mineral and tap water is described. The procedure is based on the selective retention of TBT by a chelating resin, Amberlite XAD-2 impregnated with tropolone. The addition of 0.8% sulfuric acid to the water sample leads to the retention of TBT by the resin while monobutyltin (MBT), dibutyltin (DBT) and inorganic tin ...

Ultrasound-assisted extraction (UAE) is introduced to upper-level analytical chemistry students as a simple strategy focused on sample preparation for trace-metal determination in biological tissues. Nickel extraction in seafood samples and quantification by electrothermal atomic absorption spectrometry (ETAAS) are carried out by a ...

AAS as a highly sensitive and specific single element technique is ideally suited as a detector for speciation analysis. The combinations of chromatographic separation with element specific detectors (flame AAS, electrothermal AAS (ETAAS), hydride generation AAS (HGAAS)) provide powerful approaches to the determination of all species. Sample stabilisation is the area that ...

For biological monitoring of heavy metal exposure in occupational toxicology, usually whole blood and urine samples are the most widely used and accepted matrix to assess internal xenobiotic exposure. Hair samples and saliva are also of interest in occupational and environmental health surveys but procedures for the determination of metals in saliva and hair are very scarce and to our knowledge ...

An improved single drop microextraction procedure was developed for the preconcentration of lead prior to its determination by electrothermal atomic absorption spectrometry. Ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C4MIM][PF6], was used as an alternative to volatile organic solvents for extraction. Lead was complexed with ammonium ...

A mixed matrix modifier of nickel and strontium nitrates was used as a chemical modifier for the determination of selenium in wines by Zeeman electrothermal atomic absorption spectrometry. Wine samples were heated on a boiling water bath with small amounts of nitric acid and hydrogen peroxide. For complete elimination of interference, especially from ...

An efficient and sensitive method for the determination of methylmercury in biological samples was developed based on acid leaching extraction of methylmercury into toluene. Methylmercury in the organic phase was determined by electrothermal atomic absorption spectrometry (ETAAS). The methylmercury signal was enhanced and the ...

In this modality, the extraction phase is formed in situ while simultaneously extracting analytes. First, a water-miscible ionic liquid (IL) ([Hmim][BF(4)]), capable of complete dissolving in the aqueous solution, was added to the sample. Then, an ion-exchange reagent (NaPF(6)) was added to obtain the hydrophobic IL ([Hmim][PF(6)]) that acted as the analyte extractant to form the cloudy ...

The slurry technique was applied to the determination of Ni, Cr and Co in wheat flour by electrothermal atomic absorption spectrometry (ETAAS). The influence of the graphite furnace temperature programme was optimized. Optimum sensitivity was obtained by using a mixture of 15% HNO(3)-10% H(2)O(2) as suspended medium for a 3% w/v slurry ...

Solid Certified Reference Materials (CRMs) with known vanadium(+5) content are currently not commercially available. Because of this, vanadium species have been determined in solid CRMs of soil, viz. CRM023-50, CRM024-50, CRM049-50, SQC001 and SQC0012. These CRMs are certified with only total vanadium content. Vanadium(+5) was extracted from soil reference materials with 0.1M Na(2)CO(3). The ...

An on-line inorganic and organomercury species separation, preconcentration and determination system consisting of cold vapor atomic absorption spectrometry (CV-AAS or CV-ETAAS) coupled to a flow injection (FI) method was studied. The inorganic mercury species was retained on a column (i.d., 3 mm; length 3 cm) packed to a height of 0.7 ...

This paper presents the validation of a system for sample digestion using a digester block/cold finger to determine the lead content in vegetables by electrothermal atomic absorption spectrometry (ETAAS). After mineralization, lead contents were determined by ETAAS using a calibration curve based on aqueous ...

A simple solidification of floating drop microextraction procedure for preconcentration and speciation of trace amounts of As(III) and As(V) in water samples has been proposed prior to electrothermal atomic absorption spectrometry (ETAAS). In this method, a free microdroplet of organic solvent is floated on the surface of aqueous ...

A highly selective procedure is proposed for the determination of ultra-trace level concentrations of nickel in saline aqueous matrices exploiting a micro-sequential injection Lab-On-Valve (muSI-LOV) sample pretreatment protocol comprising bead injection separation/pre-concentration and detection by electrothermal atomic absorption spectrometry ...

Flow field-flow fractionation (Fl-FFF) with off-line electrothermal atomic absorption spectrometry (ETAAS) detection was developed and employed for particle size characterization of Ag NPs stabilized by citrate, pectin, and alginate. Citrate stabilized-Ag NPs were prepared from sodium borohydride reduction of silver nitrate. Sodium ...

A comparative study of pretreatment methods for the determination of 10 elements (As, Cd, Pb, V, Ni, Mn, Cr, Cu, Fe, Al) in atmospheric aerosols by electrothermal atomic absorption spectrometry (ETAAS) was conducted. For the digestion of the particulates collected in filters, six methods were compared using a mixture of HNO(3) and HF ...

A simple, sensitive method for the speciation of inorganic antimony by cloud point extraction combined with electrothermal atomic absorption spectrometry (ETAAS) is presented and evaluated. The method based on the fact that formation of a hydrophobic complex of antimony(III) with ammonium pyrrolidine dithiocarbamate (APDC) at pH 5.0 ...

A selective preconcentration method was described for the determination of inorganic thallium species by electrothermal atomic absorption spectrometry (ETAAS). Thallium(III) and thallium(I) as chloro and iodo complexes were selectively retained by a column containing 0.5g of Chromosorb 105 resin and quantitatively eluted by 10mL of ...

A new method of hollow fiber liquid phase microextraction (HF-LPME) using ammonium pyrrolidine dithiocarbamate (APDC) as extractant combined with electrothermal atomic absorption spectrometry (ETAAS) using Pd as permanent modifier has been described for the speciation of As(III) and As(V). In a pH range of 3.0-4.0, the complex of ...

A method for determination of trace amounts of gold in environmental samples (rocks, soils, sediments, and waters) by atomic absorption spectrometry with electrothermal atomization (ETAAS) after preconcentration using a chelating sorbent Spheron Thiol 1000 is described. The method accurately determines gold between 0.001 and several ...

In this study, 60 human permanent healthy teeth (without filling) were collected postmortem and analyzed using flame atomic absorption spectrometry (FAAS), cold vapor atomic absorption spectrometry (CVAAS), hydride generation atomic absorption spectrometry (HGAAS), and ...

A sequential extraction procedure for separating and determining Be(0), soluble Be(II) inorganic compounds, BeO and beryllium silicates in samples such as particulate matter of emissions and working areas, has been developed. The proposed procedure has been tested on synthetic samples prepared with the inorganic beryllium compounds, in the presence of atmospherical particulate matter sampled in a ...

When tin is to be determined in such a complex matrix like aqua regia extracts of environmental samples by electrothermal atomic absorption spectrometry (ETAAS), spectral interferences occur when deuterium-lamp (D(2)) background correction is used, even using high pyrolysis temperature of 1400 degrees C achieved with palladium with ...

A fast flotation method for determination of cadmium and lead in aquatic systems by two chromium(III) collectors is described. The first collector is a colloid precipitate of hydrated chromium(III) oxide, Cr2O3 x xH2O, while the second is a bulk chromium(III) pentamethylenedithiocarbamate, Cr(PMDTC)3. Cadmium and lead present in water are incorporated into the collector mass at pH 7.5 by addition ...

Quadrupole Inductively coupled plasma mass spectrometric (QICP-MS) and electrothermal atomic absorption spectrophotometric (ETAAS) methods for the determination of Pb and Cd in whole blood and Al, Cd, Co and Ni in urine were compared. Simple sample pretreatments were used for both instrumental techniques. Urine samples were diluted with either Millipore ...

... Accession Number : ADA278263. Title : Ultraviolet Absorption Spectrometry (UVAS) and Liquid Atomic Emission Spectrometry (LAES. ...

Analytical problems in determination of arsenic in marine tissues are addressed. Procedures for the determination of total As in solubilized or extracted tissues with tetramethylammonium hydroxide and methanol have been elaborated. Several typical lyophilized tissues were used: NIST SRM 1566a �Oyster Tissue�, BCR-60 CRM �Trace Elements in an Aquatic Plant (Lagarosiphon major)�, BCR-627 ...

A novel electrothermal atomic absorption spectrometry (ETAAS) method was developed for the halogenation of refractory sample components (Er, Nd and Nb) of lithium niobate (LiNbO(3)) and bismuth tellurite (Bi(2)TeO(5)) optical single crystals to overcome memory effects and carry-over. For this purpose, the cleaning step of a regular ...

The presence of Cr(VI) in soils and plants of remote unpolluted areas can be explained by partial oxidation of Cr(III) with atmospheric oxygen during seasonable bush fires, which are rather frequent event in South Africa. Experiments with thermal treatment of a veld grass, Hyperthelia dissoluta, in muffle furnace at high temperature, followed by electrothermal atomic ...

Homogenization with a flat valve homogenizer in combination with high-speed blending was evaluated for the preparation of slurries suitable for the ETAAS determination of cadmium, copper and lead concentrations in six SRMs and in frozen cervine liver and kidney. Fresh tissue (approximately 2 g) or powdered SRM (approximately 0.1 g) was dispersed, at high speed, in 20 ml of ...

The mixture of palladium (chloride) with citric acid and lithium is proposed as a new chemical modifier for the elimination of interference occurred during the determination of Tl in aqua regia extracts from rocks, soils and sediments by electrothermal atomic absorption spectrometry using instrumentation with deuterium-lamp background correction ...

Our aims in this study were to determine proximal-distal variability in adult human tibia lead concentration via electrothermal atomization atomic absorption spectrometry (ETAAS) and to determine whether there were any differences between core and surface tibia lead concentrations. We analyzed duplicate core and surface tibia samples ...

Our aims in this study were to determine proximal-distal variability in adult human tibia lead concentration via electrothermal atomization atomic absorption spectrometry (ETAAS) and to determine whether there were any differences between core and surface tibia lead concentrations. We analyzed duplicate core and surface tibia samples ...

A simple and sensitive method has been developed for determination of inorganic and methyl mercury in biological samples by ETAAS. For determination of methyl mercury; it was transferred to toluene phase by acid leaching extraction method. For total mercury after digestion of samples; it was extracted to toluene phase by means of the chelating agent diethyldithiocarbamate. ...

This paper describes an ETAAS method to quantify residues of arsenic, cadmium and lead in porcine and bovine kidneys. The results of a survey conducted during 1993 are tabulated. Analysis was performed by ETAAS with a stabilized-temperature platform furnace. The determinations were performed in the linear ranges 0.5-150, 0.04-2.0 and 1.1-75 micrograms l-1 ...

A novel on-line preconcentration method based on liquid-liquid (L-L) extraction with room temperature ionic liquids (RTILs) coupled to flame atomic absorption spectrometry (FAAS) was developed for cadmium determination in plastic food packaging materials. The methodology is based on the complexation of Cd with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol ...

The principal aim of this study was to gain a better understanding of where lead (Pb) accumulates and how it is distributed, within the bones of dosed goats. Adult goats were periodically dosed with Pb over a number of years for the primary purpose of producing blood pools containing endogenously bound Pb, for the New York State Blood Lead Proficiency Testing Program. Bone samples (e.g., primarily ...

Procedures for the quantification of total chromium and hexavalent chromium in UHT milk samples are presented. Total chromium was determined directly in milk with the addition of a surfactant and a mixture of Pd and Mg as a chemical modifier. For the selective separation of hexavalent chromium, the sample pre-treatment consisted in precipitation of proteins and elution of the supernatant through a ...

The principal aim of this study was to gain a better understanding of where lead (Pb) accumulates and how it is distributed, within the bones of dosed goats. Adult goats were periodically dosed with Pb over a number of years for the primary purpose of producing blood pools containing endogenously bound Pb, for the New York State Blood Lead Proficiency Testing Program. Bone samples (e.g., primarily ...

This paper presents the distributions of the investigation of trace metals geochemistry in surface sediments of the Sergipe river estuary, northeast Brazil. Analyses were carried out by Flame or electrothermal atomic absorption spectrometry (FAAS or ETAAS). Principal component analysis was applied to results to identify any groupings ...

There is a growing concern about the effect of palladium on human health because of the toxicity and increasing occurrence of palladium as a result of its extensive use in automotive catalytic converters. Development of reliable analytical methodologies for the determination of palladium in environmental materials is of great importance for critical evaluation of the possible risks for human ...

The behavior of various organic V forms dissolved in xylene during analysis by electrothermal atomic absorption spectrometry (ETAAS) was compared. The investigated analyte forms included compounds with vanadium at the oxidation state III, IV or V, as well as N, O or S atoms in molecules. Another group consisted of petroleum products ...

A novel, rapid and simple method by hydride generation-electrothermal atomic absorption spectrometry (HG-ETAAS) after direct As, Bi, Sb and Sn hydrides generation from untreated filters of atmospheric particulate matter (PM(10) and PM(2.5)) was optimised. PM(10) and PM(2.5) were not subjected to any pre-treatment: circular portions ...

Excessive exposure to aluminum (Al) can produce serious health consequences in people with impaired renal function, especially those undergoing hemodialysis. Al can accumulate in the brain and in bone, causing dialysis-related encephalopathy and renal osteodystrophy. Thus, dialysis patients are routinely monitored for Al overload, through measurement of their serum Al. Electrothermal atomic ...

A greenhouse trial was carried out to evaluate the assimilation of heavy metals by three types of horticultural plants (lettuce, broccoli and alfalfa), different parts of which are destined for human and animal consumption (leaves, roots, fruits). The plants were cultivated in four types of soil, one uncontaminated (T1), one soil collected in the surrounding area of Sierra Minera (T2), the third ...

In this study, lead in raw cow's milk has been determined by validated electrothermal atomic absorption spectrometry (ETAAS) with Zeeman-effect background correction. Maximum pyrolysis and optimum atomization temperatures of lead were determined in the presence of modifiers. Pd + Mg(NO3)2 has been found a powerful modifier mixture for ...

In the earlier parts of this series of reviews [1,2], the most relevant flowing stream techniques (namely, segmented flow analysis, continuous flow analysis, flow injection (FI) analysis, sequential injection (SI) analysis, multicommuted flow injection analysis and multisyringe flow injection analysis) applied to the determination of several core inorganic parameters for water quality assessment, ...