A proposal to design, construct, and operate a D--Li intense neutron source for CTR materials research is discussed. Information pertaining to the following areas is given: (1) radiation damage effectiveness, (2) Linac design and performance, (3) target design and performance, (4) experimental area design, ...
DOE Information Bridge
The technologies that are being utilized to design and build the target systems for a state-of-the-art accelerator- based neutron source, the Spallation Neutron Source (SNS), are discussed. Emphasis is given to the technology issues that present the greatest challenges. The present facility configuration, ...
Innovative facility for neutron capture therapy has been built at BINP. This facility is based on compact vacuum insulation tandem accelerator designed to produce proton current up to 10mA. Epithermal neutrons are proposed to be generated by 1.915-2.5MeV protons bombarding a lithium target using (7)Li(p,n)(7)Be threshold reaction. In ...
PubMed
Pilot innovative facility for neutron capture therapy was built at Budker Institute of Nuclear Physics, Novosibirsk. This facility is based on a compact vacuum insulation tandem accelerator designed to produce proton current up to 10 mA. Epithermal neutrons are proposed to be generated by 1.915 MeV protons bombarding a lithium target ...
Experiments are being developed at the Triangle Universities Nuclear Laboratory to offer undergraduate physics majors laboratory experiences in the atmosphere of a frontier accelerator facility. These experiments differ from projects done by Undergraduate Research Assistants in that they are designed specifically for integration into the undergraduate ...
NASA Astrophysics Data System (ADS)
The International Fusion Materials Irradiation Facility (IFMIF) employs an accelerator based D-Li intense neutron source as defined in the 1995-96 Conceptual Design Activity (CDA) study under the direction of the IEA's Executive Committee on Fusion Materials. Full performance operation (2 MW/m2 at 500 cm3) allows ...
The d-Li Neutron Source concept, which includes a high-current dueteron linac, is an outgrowth of attempts made to use the BNL, 200-MeV proton linac BLIP facility to do radiation damage studies. It included a 100 mA, 30-MeV deuteron linear accelerator and a fast-flowing liquid lithium jet as the target. The latest design is not very different, except that ...
An innovative accelerator-based neutron source for BNCT has just started operation at the Budker Institute of Nuclear Physics, Novosibirsk. One of the main elements of the facility is a lithium target producing neutrons via the threshold (7)Li(p,n)(7)Be reaction at 25 kW proton beam with energies of 1.915 MeV or 2.5 MeV. The design of ...
Oak Ridge National Laboratory Physics Division The Oak Ridge Electron Linear Accelerator Pulsed Neutron Source The ORELA is a powerful electron accelerator-based neutron source...
Science.gov Websites
We present a conceptual design of a low-energy neutron generator for treatment of brain tumors by boron neutron capture theory (BNCT). The concept is based on a 2.5-MeV proton beam from a radio-frequency quadrupole (RFQ) linac, and the neutrons are produced by the /sup 7/Li(p,n)/sup 7/Be reaction. A liquid lithium target and modulator assembly are designed ...
Energy Citations Database
Turkish accelerator complex (TAC) project was approved by State Planning Organization (DPT) of Turkey in 2006. The complex will contain a linac-ring type electron positron collider as a particle factory and different accelerator based light sources. As a first step to the national center, the construction of an IR FEL facility is ...
The Spallation Neutron Source (SNS) is a Department of Energy, accelerator-based neutron source proposed for construction at the Oak Ridge National Laboratory. The project is currently nearing the end of the conceptual design stage. The objective of the target facility is to provide beams of pulsed thermal and sub-thermal neutrons for ...
Monte Carlo modelling of an irradiation facility, for boron neutron capture therapy (BNCT) application, using a set of advanced type, accelerator based, 3H(d,n)4He (D-T) fusion neutron source device is presented. Some general issues concerning the design of a proper irradiation beam shaping assembly, based on very ...
Experiments are being developed at the Triangle Universities Nuclear Laboratory to offer advanced undergraduate physics students laboratory experiences in the atmosphere of a frontier accelerator facility. These experiments differ from projects done by Undergraduate Research Assistants in that they are designed specifically for integration into the ...
Using high current, cw linear accelerator technology, a spallation neutron source can achieve much higher average intensities than existing or proposed pulsed spallation sources. With about 100 mA of 300 MeV protons or deuterons, the accelerator based neutron research facility (ABNR) would initially achieve the 1016 n/cm2 s thermal ...
The SNS will be the world's leading accelerator-based neutron-scattering research facility when it begins operation in 2005. By delivering 1-MW of beam power to a heavy-metal target in short (<1 {mu}s) bursts of 1-GeV protons, the SNS will provide intense neutron beams with flux levels at least a factor of five over present spallation ...
The Chalk River Laboratories of Atomic Energy of Canada Ltd. was a major centre for Accelerator based physics for the last fifty years. As early as 1946, nuclear structure studies were started on Cockroft-Walton accelerators. A series of accelerators followed, including the world's first Tandem, and the MP Tandem, Superconducting Cyclotron (TASCC) ...
The China Spallation Neutron Source (CSNS) is an accelerator based multidiscipline user facility planned to be constructed in Dongguan, Guangdong, China. The CSNS complex consists of an negative hydrogen linear accelerator, a rapid cycling proton synchrotron accelerating the beam to 1.6 GeV energy, a solid tungsten target station, and ...
The prediction of materials lifetime in the preconceptual Los Alamos National Laboratory (LANL) Accelerator-Based Conversion of Plutonium (ABC) is of utmost interest. Because Hastelloy N showed good corrosion resistance to the Oak Ridge National Laboratory Molten Salt Reactor Experiment fuel salt that is similar to the LANL ABC fuel salt, Hastelloy N was originally proposed ...
China Spallation Neutron Source (CSNS) is a high power proton accelerator-based facility. Uncontrolled beam loss is a major concern in designing the CSNS to control the radioactivation level. For the Rapid Cycling Synchrotron (RCS) of the CSNS, the repetition frequency is too high for the longitudinal motion to be fully adiabatic. ...
In this work we present an optimized neutron beam shaping assembly for epithermal Accelerator-Based Boron Neutron Capture Therapy (AB-BNCT) and discuss the simulations leading to its design.
Results and conclusions are reported from a design study for a dedicated medical accelerator. Basing efforts on the current consensus regarding medical requirements, the resulting demands on accelerator and beam delivery systems were analyzed, and existin...
National Technical Information Service (NTIS)
The U.S. Spallation Neutron Source (SNS) is the leading accelerator-based, pulsed neutron-scattering facility, currently in the process of ramping up neutron production. In order to insure meeting operational requirements as well as providing for future facility beam power upgrades, a multifaceted H{sup -} ion source development ...
The U.S. Spallation Neutron Source (SNS) is the leading accelerator-based, pulsed neutron-scattering facility, currently in the process of ramping up neutron production. In order to insure meeting operational requirements as well as providing for future facility beam power upgrades, a multifaceted H- ion source development program is ...
A new conceptual design for an accelerator-based boron neutron capture therapy (ABNCT) facility based on the high-current low-energy proton beam driven by the linear accelerator at SARAF (Soreq Applied Research Accelerator Facility) incident on a windowless forced-flow liquid-lithium target, is described. The liquid-lithium target, ...
Research and development supporting the completed design of the Fusion Materials Irradiation Test (FMIT) Facility is continuing at the Hanford Engineering Development Laboratory (HEDL) in Richland, Washington. The FMIT, a deuteron accelerator based (d + Li) neutron source, will produce an intense flux of high ...
Several accelerator-based intense neutron sources have been constructed or designed by various laboratories around the world. All of these facilities have a common scheme of a linac and synchrotron or accumulator ring, and the system produces the proton energy of 500 to 1000 MeV. The average beam currents range from a few mA to a few ...
The proposed National Biomedical Tracer Facility (NBTF) will house a high-current accelerator dedicated to production of short-lived radionuclides for biomedical and scientific research. The NBTF will play a vital role in repairing and maintaining the United States` research infrastructure for generation of essential accelerator-based radioisotopes. If ...
When coupled with the spallation process in appropriate target materials, high-power accelerators can be used to produce large numbers of neutrons, thus providing an alternate method to the use of nuclear reactors for this purpose. Spallation offers exciting new possibilities for generating intense neutron fluxes for a variety of applications, including: (a) spallation-neutron sources for ...
Accelerator-based atomic physics experiments at Brookhaven presently use heavy-ion beams from the Dual MP Tandem Van de Graaff Accelerator Facility for atomic physics experiments of several types. Work is presently in progress to develop experiments which will use the intense photon beams which will be available in the near future from the ultraviolet (uv) ...
The International Fusion Materials Irradiation Facility (IFMIF) is proposed as an advanced accelerator-based neutron source for high-flux irradiation testing of large-sized fusion reactor components. The facility would require only small extensions to exi...
The technologies that are being utilized to design and build the target systems for a state-of-the-art accelerator-based neutron source, the Spallation Neutron Source (SNS), are discussed. Emphasis is given to the technology issues that present the greate...
We are here today to testify on the Department of Energy's (DOE) management of the Spallation Neutron Source Project (project). This billion- dollar complex, to be built in Oak Ridge, Tennessee, is designed to be the world's most powerful accelerator-base...
A conceptual design of a muon acceleration based on recirculating superconducting linacs is proposed. In the presented scenario, acceleration starts after ionization cooling at 210 MeV/c and proceeds to 20 GeV, where the beam is injected into a neutrino f...
All accelerator-based fast-neutron contraband interrogation systems have many closely interrelated subsystems, whose performance parameters will be critically interdependent. For optimal overall performance, a systems analysis design approach is required....
. Scott. The design and testing high power lithium target for accelerator-based boron neutron capture therapy. Research and Development in Neutron Capture Therapy, Eds.: W. Sauerwein, R. Moss, and A. Wittig . - , , . , . [1] B. Bayanov, et al. Accelerator based neutron source for the neutron-capture and fast neutron
E-print Network
The Peking University Neutron Imaging Facility (PKUNIFTY) is a Radio Frequency Quadruple (RFQ) accelerator based system. The fast neutrons are produced by 2 MeV deuterons bombarding beryllium target. The moderator, reflector, shielding and collimator have been optimized with Monte-Carlo simulation to improve the neutron beam quality. ...
Pilot innovative accelerator based neutron source for neutron capture therapy of cancer is under construction now at the Budker Institute. One of the main elements of the facility is lithium target producing neutrons via threshold 7Li(p, n)7Be reaction at 10 mA proton beam with energies of 1.915 MeV or 2.5 MeV. In the present report, ...
The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory is an accelerator based neutron scattering facility. The SNS uses the large scale high energy superconducting linac (SCL) to provide high beam power utilizing hydrogen ion (H-) beams. For the diagnostics of high-brightness H- beam in the SCL, nonintrusive methods have ...
The fourteenth International Conference on the Application of Accelerators in Research and Industry was held in November, 1996 in Texas, USA. The United States Department of Energy was one of the sponsors of this conference. The conference was widely attended by accelerator scientists throughout the world. The topics discussed included a wide range of applications spanning the fields from Art ...
