Sample records for acceptability curve results

  1. Cost-effectiveness acceptability curves and a reluctance to lose.

    PubMed

    Severens, Johan L; Brunenberg, Daniëlle E M; Fenwick, Elisabeth A L; O'Brien, Bernie; Joore, Manuela A

    2005-01-01

    Cost-effectiveness acceptability curves (CEACs) are a method used to present uncertainty surrounding incremental cost-effectiveness ratios (ICERs). Construction of the curves relies on the assumption that the willingness to pay (WTP) for health gain is identical to the willingness to accept (WTA) health loss. The objective of this paper is to explore the impact that differences between WTP and WTA health changes have on CEACs. Previous empirical evidence has shown that the relationship between WTP and WTA is not 1:1. The discrepancy between WTP and WTA for health changes can be expressed as a ratio: the accept/reject ratio (which can vary between 1 and infinity). Depending on this ratio, the area within the southwest quadrant of the cost-effectiveness plane in which any bootstrap cost-effect pairs will be considered to be cost effective will be smaller, resulting in a lower CEAC. We used data from two clinical trials to illustrate that relaxing the 1:1 WTP/WTA assumption has an impact on the CEACs. Given the difficulty in assessing the accept/reject ratio for every evaluation, we suggest presenting a series of CEACs for a range of values for the accept/reject ratio, including 1 and infinite. Although it is not possible to explain this phenomenon within the extra-welfarist framework, it has been shown empirically that individuals give a higher valuation to the removal of effective therapies than to the introduction of new therapies that are more costly and effective. In cost-effectiveness analyses where uncertainty of the ICER covers the southwest quadrant of the cost-effectiveness plane, the discrepancy between societies' WTP and WTA should be indicated by drawing multiple CEACs.

  2. Cost-effectiveness acceptability curves revisited.

    PubMed

    Al, Maiwenn J

    2013-02-01

    Since the introduction of the cost-effectiveness acceptability curve (CEAC) in 1994, its use as a method to describe uncertainty around incremental cost-effectiveness ratios (ICERs) has steadily increased. In this paper, first the construction and interpretation of the CEAC is explained, both in the context of modelling studies and in the context of cost-effectiveness (CE) studies alongside clinical trials. Additionally, this paper reviews the advantages and limitations of the CEAC. Many of the perceived limitations can be attributed to the practice of interpreting the CEAC as a decision rule while it was not developed as such. It is argued that the CEAC is still a useful tool in describing and quantifying uncertainty around the ICER, especially in combination with other tools such as plots on the CE plane and value-of-information analysis.

  3. Can Coolness Predict Technology Adoption? Effects of Perceived Coolness on User Acceptance of Smartphones with Curved Screens.

    PubMed

    Kim, Ki Joon; Shin, Dong-Hee; Park, Eunil

    2015-09-01

    This study proposes an acceptance model for curved-screen smartphones, and explores how the sense of coolness induced by attractiveness, originality, subcultural appeal, and the utility of the curved screen promotes smartphone adoption. The results of structural equation modeling analyses (N = 246) show that these components of coolness (except utility) increase the acceptance of the technology by enhancing the smartphones' affectively driven qualities rather than their utilitarian ones. The proposed coolness model is then compared with the original technology acceptance model to validate that the coolness factors are indeed equally effective determinants of usage intention, as are the extensively studied usability factors such as perceived ease of use and usefulness.

  4. On the convexity of ROC curves estimated from radiological test results

    PubMed Central

    Pesce, Lorenzo L.; Metz, Charles E.; Berbaum, Kevin S.

    2010-01-01

    Rationale and Objectives Although an ideal observer’s receiver operating characteristic (ROC) curve must be convex — i.e., its slope must decrease monotonically — published fits to empirical data often display “hooks.” Such fits sometimes are accepted on the basis of an argument that experiments are done with real, rather than ideal, observers. However, the fact that ideal observers must produce convex curves does not imply that convex curves describe only ideal observers. This paper aims to identify the practical implications of non-convex ROC curves and the conditions that can lead to empirical and/or fitted ROC curves that are not convex. Materials and Methods This paper views non-convex ROC curves from historical, theoretical and statistical perspectives, which we describe briefly. We then consider population ROC curves with various shapes and analyze the types of medical decisions that they imply. Finally, we describe how sampling variability and curve-fitting algorithms can produce ROC curve estimates that include hooks. Results We show that hooks in population ROC curves imply the use of an irrational decision strategy, even when the curve doesn’t cross the chance line, and therefore usually are untenable in medical settings. Moreover, we sketch a simple approach to improve any non-convex ROC curve by adding statistical variation to the decision process. Finally, we sketch how to test whether hooks present in ROC data are likely to have been caused by chance alone and how some hooked ROCs found in the literature can be easily explained as fitting artifacts or modeling issues. Conclusion In general, ROC curve fits that show hooks should be looked upon with suspicion unless other arguments justify their presence. PMID:20599155

  5. On the convexity of ROC curves estimated from radiological test results.

    PubMed

    Pesce, Lorenzo L; Metz, Charles E; Berbaum, Kevin S

    2010-08-01

    Although an ideal observer's receiver operating characteristic (ROC) curve must be convex-ie, its slope must decrease monotonically-published fits to empirical data often display "hooks." Such fits sometimes are accepted on the basis of an argument that experiments are done with real, rather than ideal, observers. However, the fact that ideal observers must produce convex curves does not imply that convex curves describe only ideal observers. This article aims to identify the practical implications of nonconvex ROC curves and the conditions that can lead to empirical or fitted ROC curves that are not convex. This article views nonconvex ROC curves from historical, theoretical, and statistical perspectives, which we describe briefly. We then consider population ROC curves with various shapes and analyze the types of medical decisions that they imply. Finally, we describe how sampling variability and curve-fitting algorithms can produce ROC curve estimates that include hooks. We show that hooks in population ROC curves imply the use of an irrational decision strategy, even when the curve does not cross the chance line, and therefore usually are untenable in medical settings. Moreover, we sketch a simple approach to improve any nonconvex ROC curve by adding statistical variation to the decision process. Finally, we sketch how to test whether hooks present in ROC data are likely to have been caused by chance alone and how some hooked ROCs found in the literature can be easily explained as fitting artifacts or modeling issues. In general, ROC curve fits that show hooks should be looked on with suspicion unless other arguments justify their presence. 2010 AUR. Published by Elsevier Inc. All rights reserved.

  6. First Results From The Ultimate Spitzer Phase Curve Survey

    NASA Astrophysics Data System (ADS)

    Stevenson, Kevin B.; Bean, Jacob; Deming, Drake; Desert, Jean-Michel; Fortney, Jonathan J.; Kataria, Tiffany; Kempton, Eliza; Lewis, Nikole; Line, Michael R.; Morley, Caroline; Rauscher, Emily; Showman, Adam P.

    2017-10-01

    Exoplanet phase curves provide a wealth of information about exoplanet atmospheres, including longitudinal constraints on atmospheric composition, thermal structure, and energy transport, that continue to open new doors of scientific inquiry and propel future investigations. The measured heat redistribution efficiency (or ability to transport energy from a planet's highly-irradiated dayside to its eternally-dark nightside) shows considerable variation between exoplanets. Theoretical models predict a correlation between heat redistribution efficiency and planet temperature; however, the latest results are inconsistent with current predictions. We will present first results from a 660-hour Spitzer phase curve survey program that is targeting six short-period extrasolar planets. We will compare the measured heat redistribution efficiencies with planet temperature and rotation rate, examine trends in the phase curve peak offset, and discuss cloud coverage constraints. We will conclude with how to move forward with phase curve observations in the era of JWST.

  7. Results of Casting in Severe Curves in Infantile Scoliosis.

    PubMed

    Stasikelis, Peter J; Carpenter, Ashley M

    2018-04-01

    Previous work has demonstrated best results for casting in infantile scoliosis when the curves are small and the child begins casting under 2 years of age. This study examines if casting can delay the need for growth friendly instrumentation in severe curves (50 to 106 degrees) and how the comorbidities of syrinx or genetic syndromes affected outcomes. All children undergoing casting for scoliosis at a single institution over an 8-year period were examined. Inclusion criteria included initial curve at first casting of ≥50 degrees, age ≤3 years at the start of casting, and a minimum follow-up of 3 years. Of 148 children undergoing casting during this period, 44 met our inclusion criteria. All children underwent magnetic resonance imaging. Ten children with a syrinx were identified. Ten children had known genetic syndromes (2 who also had a syrinx). The 26 children without these comorbidities were considered idiopathic. Curve magnitude ranged from 50 to 106 degrees. Nine of the 26 (35%) children in the children with idiopathic curves demonstrated resolution of their curves, while only 3 of the remaining 18 (17%) did. Of the children that did not have resolution of their curves, 14 were maintained over the entire follow-up period to within 15 degrees of their initial curve and 13 were improved 15 degrees or more. Only 5 children had an increase of 15 degrees or more over the follow-up period and 4 of these have undergone growth friendly instrumentation after a mean delay from initial cast of 71 months (range, 18 to 100 mo). This study demonstrates that even in severe curves, casting was effective in delaying instrumentation in all cases, and led to curve resolution of the curves in 12 of 44 children. Level III-case control study.

  8. Simultaneous development of laparoscopy and robotics provides acceptable perioperative outcomes and shows robotics to have a faster learning curve and to be overall faster in rectal cancer surgery: analysis of novice MIS surgeon learning curves.

    PubMed

    Melich, George; Hong, Young Ki; Kim, Jieun; Hur, Hyuk; Baik, Seung Hyuk; Kim, Nam Kyu; Sender Liberman, A; Min, Byung Soh

    2015-03-01

    Laparoscopy offers some evidence of benefit compared to open rectal surgery. Robotic rectal surgery is evolving into an accepted approach. The objective was to analyze and compare laparoscopic and robotic rectal surgery learning curves with respect to operative times and perioperative outcomes for a novice minimally invasive colorectal surgeon. One hundred and six laparoscopic and 92 robotic LAR rectal surgery cases were analyzed. All surgeries were performed by a surgeon who was primarily trained in open rectal surgery. Patient characteristics and perioperative outcomes were analyzed. Operative time and CUSUM plots were used for evaluating the learning curve for laparoscopic versus robotic LAR. Laparoscopic versus robotic LAR outcomes feature initial group operative times of 308 (291-325) min versus 397 (373-420) min and last group times of 220 (212-229) min versus 204 (196-211) min-reversed in favor of robotics; major complications of 4.7 versus 6.5 % (NS), resection margin involvement of 2.8 versus 4.4 % (NS), conversion rate of 3.8 versus 1.1 (NS), lymph node harvest of 16.3 versus 17.2 (NS), and estimated blood loss of 231 versus 201 cc (NS). Due to faster learning curves for extracorporeal phase and total mesorectal excision phase, the robotic surgery was observed to be faster than laparoscopic surgery after the initial 41 cases. CUSUM plots demonstrate acceptable perioperative surgical outcomes from the beginning of the study. Initial robotic operative times improved with practice rapidly and eventually became faster than those for laparoscopy. Developing both laparoscopic and robotic skills simultaneously can provide acceptable perioperative outcomes in rectal surgery. It might be suggested that in the current milieu of clashing interests between evolving technology and economic constrains, there might be advantages in embracing both approaches.

  9. Early results after laparoscopic Roux-en-Y gastric bypass: effect of the learning curve

    PubMed Central

    Andrew, Christopher G.; Hanna, Wael; Look, Didier; McLean, Alexander P.H.; Christou, Nicolas V.

    2006-01-01

    Introduction This study was performed to evaluate the safety and short-term efficacy of laparoscopic Roux-en-Y gastric bypass (LRYGB) for morbid obesity and to describe the relation between learning curve and short-term outcomes. Methods We collected a prospective database on the first 201 consecutive patients who underwent LRYGB by a single university-based, experienced bariatric surgeon over 24 months. We divided patients into 3 consecutive groups of 67 patients for analysis (Group 1, Group 2 and Group 3). Results The mean patient age was 37 (standard deviation [SD] 9) years; mean body mass index (BMI) was 49.2 (SD 8.3) kg/m2. BMI was similar in Groups 1 and 2 (mean 47.1, SD 5.9 and mean 48.7, SD 8.9 kg/m2) but increased in Group 3 (mean 52, SD 9.7 kg/m2, p < 0.01). Operative time decreased from 145 (SD 30) minutes in Group 1 to 114 (SD 24) minutes in Group 2 (p < 0.01) and was maintained at 119 (SD 23) minutes in Group 3. Early and late complication rates were 14.9% and 12.4%, respectively. Leak rates decreased from 6.0% in the first group to 1.5% in Groups 2 and 3, but they did not reach statistical significance. Anastomotic stricture rates decreased from 11.9% in Group 1 to 3.0% in Group 2 (p < 0.01). Overall excess weight loss for the entire series was 31.5% (SD 11.9%), 54.5% (SD 14.1%), 77.1% (SD 18.5%) and 82.1% (SD 17.5%) at 3, 6, 12 and 18 months, respectively. Conclusion LRYGB can be performed with acceptable morbidity and short-term results during the learning curve. In our series, operative time and anastomotic stricture rates decreased with experience, despite an increase in mean BMI. PMID:17234071

  10. Guidelines for application of learning/cost improvement curves

    NASA Technical Reports Server (NTRS)

    Delionback, L. M.

    1975-01-01

    The differences between the terms learning curve and improvement curve are noted, as well as the differences between the Wright system and the Crawford system. Learning curve computational techniques were reviewed along with a method to arrive at a composite learning curve for a system given detail curves either by the functional techniques classification or simply categorized by subsystem. Techniques are discussed for determination of the theoretical first unit (TFU) cost using several of the currently accepted methods. Sometimes TFU cost is referred to as simply number one cost. A tabular presentation of the various learning curve slope values is given. A discussion of the various trends in the application of learning/improvement curves and an outlook for the future are presented.

  11. A new form of the calibration curve in radiochromic dosimetry. Properties and results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tamponi, Matteo, E-mail: mtamponi@aslsassari.it; B

    Purpose: This work describes a new form of the calibration curve for radiochromic dosimetry that depends on one fit parameter. Some results are reported to show that the new curve performs as well as those previously used and, more importantly, significantly reduces the dependence on the lot of films, the film orientation on the scanner, and the time after exposure. Methods: The form of the response curve makes use of the net optical densities ratio against the dose and has been studied by means of the Beer–Lambert law and a simple modeling of the film. The new calibration curve hasmore » been applied to EBT3 films exposed at 6 and 15 MV energy beams of linear accelerators and read-out in transmission mode by means of a flatbed color scanner. Its performance has been compared to that of two established forms of the calibration curve, which use the optical density and the net optical density against the dose. Four series of measurements with four lots of EBT3 films were used to evaluate the precision, accuracy, and dependence on the time after exposure, orientation on the scanner and lot of films. Results: The new calibration curve is roughly subject to the same dose uncertainty, about 2% (1 standard deviation), and has the same accuracy, about 1.5% (dose values between 50 and 450 cGy), as the other calibration curves when films of the same lot are used. Moreover, the new calibration curve, albeit obtained from only one lot of film, shows a good agreement with experimental data from all other lots of EBT3 films used, with an accuracy of about 2% and a relative dose precision of 2.4% (1 standard deviation). The agreement also holds for changes of the film orientation and of the time after exposure. Conclusions: The dose accuracy of this new form of the calibration curve is always equal to or better than those obtained from the two types of curves previously used. The use of the net optical densities ratio considerably reduces the dependence on the lot of films

  12. Extracting information from S-curves of language change

    PubMed Central

    Ghanbarnejad, Fakhteh; Gerlach, Martin; Miotto, José M.; Altmann, Eduardo G.

    2014-01-01

    It is well accepted that adoption of innovations are described by S-curves (slow start, accelerating period and slow end). In this paper, we analyse how much information on the dynamics of innovation spreading can be obtained from a quantitative description of S-curves. We focus on the adoption of linguistic innovations for which detailed databases of written texts from the last 200 years allow for an unprecedented statistical precision. Combining data analysis with simulations of simple models (e.g. the Bass dynamics on complex networks), we identify signatures of endogenous and exogenous factors in the S-curves of adoption. We propose a measure to quantify the strength of these factors and three different methods to estimate it from S-curves. We obtain cases in which the exogenous factors are dominant (in the adoption of German orthographic reforms and of one irregular verb) and cases in which endogenous factors are dominant (in the adoption of conventions for romanization of Russian names and in the regularization of most studied verbs). These results show that the shape of S-curve is not universal and contains information on the adoption mechanism. PMID:25339692

  13. The learning curve of robot-assisted radical cystectomy: results from the International Robotic Cystectomy Consortium.

    PubMed

    Hayn, Matthew H; Hussain, Abid; Mansour, Ahmed M; Andrews, Paul E; Carpentier, Paul; Castle, Erik; Dasgupta, Prokar; Rimington, Peter; Thomas, Raju; Khan, Shamim; Kibel, Adam; Kim, Hyung; Manoharan, Murugesan; Menon, Mani; Mottrie, Alex; Ornstein, David; Peabody, James; Pruthi, Raj; Palou Redorta, Joan; Richstone, Lee; Schanne, Francis; Stricker, Hans; Wiklund, Peter; Chandrasekhar, Rameela; Wilding, Greg E; Guru, Khurshid A

    2010-08-01

    Robot-assisted radical cystectomy (RARC) has evolved as a minimally invasive alternative to open radical cystectomy for patients with invasive bladder cancer. We sought to define the learning curve for RARC by evaluating results from a multicenter, contemporary, consecutive series of patients who underwent this procedure. Utilizing the International Robotic Cystectomy Consortium database, a prospectively maintained and institutional review board-approved database, we identified 496 patients who underwent RARC by 21 surgeons at 14 institutions from 2003 to 2009. Cut-off points for operative time, lymph node yield (LNY), estimated blood loss (EBL), and margin positivity were identified. Using specifically designed statistical mixed models, we were able to inversely predict the number of patients required for an institution to reach the predetermined cut-off points. Mean operative time was 386 min, mean EBL was 408 ml, and mean LNY was 18. Overall, 34 of 482 patients (7%) had a positive surgical margin (PSM). Using statistical models, it was estimated that 21 patients were required for operative time to reach 6.5h and 8, 20, and 30 patients were required to reach an LNY of 12, 16, and 20, respectively. For all patients, PSM rates of <5% were achieved after 30 patients. For patients with pathologic stage higher than T2, PSM rates of <15% were achieved after 24 patients. RARC is a challenging procedure but is a technique that is reproducible throughout multiple centers. This report helps to define the learning curve for RARC and demonstrates an acceptable level of proficiency by the 30th case for proxy measures of RARC quality. Copyright (c) 2010 European Association of Urology. Published by Elsevier B.V. All rights reserved.

  14. A new form of the calibration curve in radiochromic dosimetry. Properties and results.

    PubMed

    Tamponi, Matteo; Bona, Rossana; Poggiu, Angela; Marini, Piergiorgio

    2016-07-01

    This work describes a new form of the calibration curve for radiochromic dosimetry that depends on one fit parameter. Some results are reported to show that the new curve performs as well as those previously used and, more importantly, significantly reduces the dependence on the lot of films, the film orientation on the scanner, and the time after exposure. The form of the response curve makes use of the net optical densities ratio against the dose and has been studied by means of the Beer-Lambert law and a simple modeling of the film. The new calibration curve has been applied to EBT3 films exposed at 6 and 15 MV energy beams of linear accelerators and read-out in transmission mode by means of a flatbed color scanner. Its performance has been compared to that of two established forms of the calibration curve, which use the optical density and the net optical density against the dose. Four series of measurements with four lots of EBT3 films were used to evaluate the precision, accuracy, and dependence on the time after exposure, orientation on the scanner and lot of films. The new calibration curve is roughly subject to the same dose uncertainty, about 2% (1 standard deviation), and has the same accuracy, about 1.5% (dose values between 50 and 450 cGy), as the other calibration curves when films of the same lot are used. Moreover, the new calibration curve, albeit obtained from only one lot of film, shows a good agreement with experimental data from all other lots of EBT3 films used, with an accuracy of about 2% and a relative dose precision of 2.4% (1 standard deviation). The agreement also holds for changes of the film orientation and of the time after exposure. The dose accuracy of this new form of the calibration curve is always equal to or better than those obtained from the two types of curves previously used. The use of the net optical densities ratio considerably reduces the dependence on the lot of films, the landscape/portrait orientation, and the time

  15. 49 CFR 180.511 - Acceptable results of inspections and tests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Acceptable results of inspections and tests. 180.511 Section 180.511 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE... results of inspections and tests. Provided it conforms to other applicable requirements of this subchapter...

  16. 49 CFR 180.511 - Acceptable results of inspections and tests.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Acceptable results of inspections and tests. 180.511 Section 180.511 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE... results of inspections and tests. Provided it conforms to other applicable requirements of this subchapter...

  17. 49 CFR 180.511 - Acceptable results of inspections and tests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Acceptable results of inspections and tests. 180.511 Section 180.511 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS... results of inspections and tests. Provided it conforms with other applicable requirements of this...

  18. 49 CFR 180.411 - Acceptable results of tests and inspections.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Acceptable results of tests and inspections. 180.411 Section 180.411 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE... results of tests and inspections. (a) Corroded or abraded areas. The minimum thickness may not be less...

  19. 49 CFR 180.411 - Acceptable results of tests and inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Acceptable results of tests and inspections. 180.411 Section 180.411 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE... results of tests and inspections. (a) Corroded or abraded areas. The minimum thickness may not be less...

  20. 49 CFR 180.411 - Acceptable results of tests and inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Acceptable results of tests and inspections. 180.411 Section 180.411 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS... results of tests and inspections. (a) Corroded or abraded areas. The minimum thickness may not be less...

  1. Extracting information from S-curves of language change.

    PubMed

    Ghanbarnejad, Fakhteh; Gerlach, Martin; Miotto, José M; Altmann, Eduardo G

    2014-12-06

    It is well accepted that adoption of innovations are described by S-curves (slow start, accelerating period and slow end). In this paper, we analyse how much information on the dynamics of innovation spreading can be obtained from a quantitative description of S-curves. We focus on the adoption of linguistic innovations for which detailed databases of written texts from the last 200 years allow for an unprecedented statistical precision. Combining data analysis with simulations of simple models (e.g. the Bass dynamics on complex networks), we identify signatures of endogenous and exogenous factors in the S-curves of adoption. We propose a measure to quantify the strength of these factors and three different methods to estimate it from S-curves. We obtain cases in which the exogenous factors are dominant (in the adoption of German orthographic reforms and of one irregular verb) and cases in which endogenous factors are dominant (in the adoption of conventions for romanization of Russian names and in the regularization of most studied verbs). These results show that the shape of S-curve is not universal and contains information on the adoption mechanism. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  2. 7 CFR 42.141 - Obtaining Operating Characteristic (OC) curve information for skip lot sampling and inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., and read the new Percent of Lots Expected to be Accepted, Pas, which results when using these skip lot... point, proceed vertically to the curve and then horizontally to the left to the vertical axis. From this...

  3. 7 CFR 42.141 - Obtaining Operating Characteristic (OC) curve information for skip lot sampling and inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., and read the new Percent of Lots Expected to be Accepted, Pas, which results when using these skip lot... point, proceed vertically to the curve and then horizontally to the left to the vertical axis. From this...

  4. Acceptability of robotic technology in neuro-rehabilitation: preliminary results on chronic stroke patients.

    PubMed

    Mazzoleni, Stefano; Turchetti, Giuseppe; Palla, Ilaria; Posteraro, Federico; Dario, Paolo

    2014-09-01

    During the last decade, different robotic devices have been developed for motor rehabilitation of stroke survivors. These devices have been shown to improve motor impairment and contribute to the understanding of mechanisms underlying motor recovery after a stroke. The assessment of the robotic technology for rehabilitation assumes great importance. The aim of this study is to present preliminary results on the assessment of the acceptability of the robotic technology for rehabilitation on a group of thirty-four chronic stroke patients. The results from questionnaires on the patients' acceptability of two different robot-assisted rehabilitation scenarios show that the robotic approach was well accepted and tolerated by the patients. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  5. Meta-analysis of Diagnostic Accuracy and ROC Curves with Covariate Adjusted Semiparametric Mixtures.

    PubMed

    Doebler, Philipp; Holling, Heinz

    2015-12-01

    Many screening tests dichotomize a measurement to classify subjects. Typically a cut-off value is chosen in a way that allows identification of an acceptable number of cases relative to a reference procedure, but does not produce too many false positives at the same time. Thus for the same sample many pairs of sensitivities and false positive rates result as the cut-off is varied. The curve of these points is called the receiver operating characteristic (ROC) curve. One goal of diagnostic meta-analysis is to integrate ROC curves and arrive at a summary ROC (SROC) curve. Holling, Böhning, and Böhning (Psychometrika 77:106-126, 2012a) demonstrated that finite semiparametric mixtures can describe the heterogeneity in a sample of Lehmann ROC curves well; this approach leads to clusters of SROC curves of a particular shape. We extend this work with the help of the [Formula: see text] transformation, a flexible family of transformations for proportions. A collection of SROC curves is constructed that approximately contains the Lehmann family but in addition allows the modeling of shapes beyond the Lehmann ROC curves. We introduce two rationales for determining the shape from the data. Using the fact that each curve corresponds to a natural univariate measure of diagnostic accuracy, we show how covariate adjusted mixtures lead to a meta-regression on SROC curves. Three worked examples illustrate the method.

  6. Is the learning curve endless? One surgeon's experience with robotic prostatectomy

    NASA Astrophysics Data System (ADS)

    Patel, Vipul; Thaly, Rahul; Shah, Ketul

    2007-02-01

    Introduction: After performing 1,000 robotic prostatectomies we reflected back on our experience to determine what defined the learning curve and the essential elements that were the keys to surmounting it. Method: We retrospectively assessed our experience to attempt to define the learning curve(s), key elements of the procedure, technical refinements and changes in technology that facilitated our progress. Result: The initial learning curve to achieve basic competence and the ability to smoothly perform the procedure in less than 4 hours with acceptable outcomes was approximately 25 cases. A second learning curve was present between 75-100 cases as we approached more complicated patients. At 200 cases we were comfortably able to complete the procedure routinely in less than 2.5 hours with no specific step of the procedure hindering our progression. At 500 cases we had the introduction of new instrumentation (4th arm, biopolar Maryland, monopolar scissors) that changed our approach to the bladder neck and neurovascular bundle dissection. The most challenging part of the procedure was the bladder neck dissection. Conclusion: There is no single parameter that can be used to assess or define the learning curve. We used a combination of factors to make our subjective definition this included: operative time, smoothness of technical progression during the case along with clinical outcomes. The further our case experience progressed the more we expected of our outcomes, thus we continually modified our technique and hence embarked upon yet a new learning curve.

  7. Are driving and overtaking on right curves more dangerous than on left curves?

    PubMed

    Othman, Sarbaz; Thomson, Robert; Lannér, Gunnar

    2010-01-01

    It is well known that crashes on horizontal curves are a cause for concern in all countries due to the frequency and severity of crashes at curves compared to road tangents. A recent study of crashes in western Sweden reported a higher rate of crashes in right curves than left curves. To further understand this result, this paper reports the results of novel analyses of the responses of vehicles and drivers during negotiating and overtaking maneuvers on curves for right hand traffic. The overall objectives of the study were to find road parameters for curves that affect vehicle dynamic responses, to analyze these responses during overtaking maneuvers on curves, and to link the results with driver behavior for different curve directions. The studied road features were speed, super-elevation, radius and friction including their interactions, while the analyzed vehicle dynamic factors were lateral acceleration and yaw angular velocity. A simulation program, PC-Crash, has been used to simulate road parameters and vehicle response interaction in curves. Overtaking maneuvers have been simulated for all road feature combinations in a total of 108 runs. Analysis of variances (ANOVA) was performed, using two sided randomized block design, to find differences in vehicle responses for the curve parameters. To study driver response, a field test using an instrumented vehicle and 32 participants was reviewed as it contained longitudinal speed and acceleration data for analysis. The simulation results showed that road features affect overtaking performance in right and left curves differently. Overtaking on right curves was sensitive to radius and the interaction of radius with road condition; while overtaking on left curves was more sensitive to super-elevation. Comparisons of lateral acceleration and yaw angular velocity during these maneuvers showed different vehicle response configurations depending on curve direction and maneuver path. The field test experiments also showed

  8. The S-curve for forecasting waste generation in construction projects.

    PubMed

    Lu, Weisheng; Peng, Yi; Chen, Xi; Skitmore, Martin; Zhang, Xiaoling

    2016-10-01

    Forecasting construction waste generation is the yardstick of any effort by policy-makers, researchers, practitioners and the like to manage construction and demolition (C&D) waste. This paper develops and tests an S-curve model to indicate accumulative waste generation as a project progresses. Using 37,148 disposal records generated from 138 building projects in Hong Kong in four consecutive years from January 2011 to June 2015, a wide range of potential S-curve models are examined, and as a result, the formula that best fits the historical data set is found. The S-curve model is then further linked to project characteristics using artificial neural networks (ANNs) so that it can be used to forecast waste generation in future construction projects. It was found that, among the S-curve models, cumulative logistic distribution is the best formula to fit the historical data. Meanwhile, contract sum, location, public-private nature, and duration can be used to forecast construction waste generation. The study provides contractors with not only an S-curve model to forecast overall waste generation before a project commences, but also with a detailed baseline to benchmark and manage waste during the course of construction. The major contribution of this paper is to the body of knowledge in the field of construction waste generation forecasting. By examining it with an S-curve model, the study elevates construction waste management to a level equivalent to project cost management where the model has already been readily accepted as a standard tool. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Toward optimizing patient-specific IMRT QA techniques in the accurate detection of dosimetrically acceptable and unacceptable patient plans

    PubMed Central

    McKenzie, Elizabeth M.; Balter, Peter A.; Stingo, Francesco C.; Jones, Jimmy; Followill, David S.; Kry, Stephen F.

    2014-01-01

    Purpose: The authors investigated the performance of several patient-specific intensity-modulated radiation therapy (IMRT) quality assurance (QA) dosimeters in terms of their ability to correctly identify dosimetrically acceptable and unacceptable IMRT patient plans, as determined by an in-house-designed multiple ion chamber phantom used as the gold standard. A further goal was to examine optimal threshold criteria that were consistent and based on the same criteria among the various dosimeters. Methods: The authors used receiver operating characteristic (ROC) curves to determine the sensitivity and specificity of (1) a 2D diode array undergoing anterior irradiation with field-by-field evaluation, (2) a 2D diode array undergoing anterior irradiation with composite evaluation, (3) a 2D diode array using planned irradiation angles with composite evaluation, (4) a helical diode array, (5) radiographic film, and (6) an ion chamber. This was done with a variety of evaluation criteria for a set of 15 dosimetrically unacceptable and 9 acceptable clinical IMRT patient plans, where acceptability was defined on the basis of multiple ion chamber measurements using independent ion chambers and a phantom. The area under the curve (AUC) on the ROC curves was used to compare dosimeter performance across all thresholds. Optimal threshold values were obtained from the ROC curves while incorporating considerations for cost and prevalence of unacceptable plans. Results: Using common clinical acceptance thresholds, most devices performed very poorly in terms of identifying unacceptable plans. Grouping the detector performance based on AUC showed two significantly different groups. The ion chamber, radiographic film, helical diode array, and anterior-delivered composite 2D diode array were in the better-performing group, whereas the anterior-delivered field-by-field and planned gantry angle delivery using the 2D diode array performed less well. Additionally, based on the AUCs, there

  10. Balancing uncertainty and acceptance: understanding Chinese women's responses to an abnormal cervical smear result.

    PubMed

    Twinn, Sheila

    2006-09-01

    The aims of this study were to examine the responses of Hong Kong Chinese women receiving an abnormal smear result and to compare any differences in responses depending on the diagnosis of the abnormal smear. The implementation of cervical screening programmes has resulted in an increasing number of women receiving an abnormal smear result requiring cytological surveillance or referral for colposcopy. Evidence suggests that women frequently misunderstood such results, believing that they already have cancer. However, little is known about the responses of Chinese women in this situation. An exploratory qualitative study. Face-to-face semi-structured tape-recorded interviews were undertaken with 66 women sampled opportunistically from an urban centre of a major non-governmental service provider. Amongst this sample, 22 women required cytological surveillance, 20 required treatment for vaginitis and 24 were referred for colposcopy. Thematic analysis was undertaken of the translated interviews within and across groups to identify categories and themes illustrating women's responses to an abnormal smear result. An important difference in the comparison of the data sets was that of women's understanding of the cause of the abnormal result. Women with vaginitis understood the cause of their abnormality, whereas those in the other groups remained unclear about their abnormality, generating feelings of fear and uncertainty. Trust in practitioners influenced women's acceptance of the result. Although responses of Chinese women are similar to those in other population groups, with those referred for colposcopy experiencing greater anxiety than those undergoing cytological surveillance, balancing feelings of uncertainty and acceptance influenced Chinese women's responses to their abnormal results and allowed them to make sense of their result in their everyday life. Trust in the practitioner was essential to the acceptance of their result. Such findings highlight implications

  11. Defining acceptable levels for ecological indicators: an approach for considering social values.

    PubMed

    Smyth, Robyn L; Watzin, Mary C; Manning, Robert E

    2007-03-01

    Ecological indicators can facilitate an adaptive management approach, but only if acceptable levels for those indicators have been defined so that the data collected can be interpreted. Because acceptable levels are an expression of the desired state of the ecosystem, the process of establishing acceptable levels should incorporate not just ecological understanding but also societal values. The goal of this research was to explore an approach for defining acceptable levels of ecological indicators that explicitly considers social perspectives and values. We used a set of eight indicators that were related to issues of concern in the Lake Champlain Basin. Our approach was based on normative theory. Using a stakeholder survey, we measured respondent normative evaluations of varying levels of our indicators. Aggregated social norm curves were used to determine the level at which indicator values shifted from acceptable to unacceptable conditions. For seven of the eight indicators, clear preferences were interpretable from these norm curves. For example, closures of public beaches because of bacterial contamination and days of intense algae bloom went from acceptable to unacceptable at 7-10 days in a summer season. Survey respondents also indicated that the number of fish caught from Lake Champlain that could be safely consumed each month was unacceptably low and the number of streams draining into the lake that were impaired by storm water was unacceptably high. If indicators that translate ecological conditions into social consequences are carefully selected, we believe the normative approach has considerable merit for defining acceptable levels of valued ecological system components.

  12. Defining Acceptable Levels for Ecological Indicators: An Approach for Considering Social Values

    NASA Astrophysics Data System (ADS)

    Smyth, Robyn L.; Watzin, Mary C.; Manning, Robert E.

    2007-03-01

    Ecological indicators can facilitate an adaptive management approach, but only if acceptable levels for those indicators have been defined so that the data collected can be interpreted. Because acceptable levels are an expression of the desired state of the ecosystem, the process of establishing acceptable levels should incorporate not just ecological understanding but also societal values. The goal of this research was to explore an approach for defining acceptable levels of ecological indicators that explicitly considers social perspectives and values. We used a set of eight indicators that were related to issues of concern in the Lake Champlain Basin. Our approach was based on normative theory. Using a stakeholder survey, we measured respondent normative evaluations of varying levels of our indicators. Aggregated social norm curves were used to determine the level at which indicator values shifted from acceptable to unacceptable conditions. For seven of the eight indicators, clear preferences were interpretable from these norm curves. For example, closures of public beaches because of bacterial contamination and days of intense algae bloom went from acceptable to unacceptable at 7-10 days in a summer season. Survey respondents also indicated that the number of fish caught from Lake Champlain that could be safely consumed each month was unacceptably low and the number of streams draining into the lake that were impaired by storm water was unacceptably high. If indicators that translate ecological conditions into social consequences are carefully selected, we believe the normative approach has considerable merit for defining acceptable levels of valued ecological system components.

  13. Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program.

    PubMed

    Afouxenidis, D; Polymeris, G S; Tsirliganis, N C; Kitis, G

    2012-05-01

    This paper exploits the possibility of using commercial software for thermoluminescence and optically stimulated luminescence curve deconvolution analysis. The widely used software package Microsoft Excel, with the Solver utility has been used to perform deconvolution analysis to both experimental and reference glow curves resulted from the GLOw Curve ANalysis INtercomparison project. The simple interface of this programme combined with the powerful Solver utility, allows the analysis of complex stimulated luminescence curves into their components and the evaluation of the associated luminescence parameters.

  14. Developing acceptance limits for measured bearing wear of the Space Shuttle Main Engine high pressure oxidizer turbopump

    NASA Technical Reports Server (NTRS)

    Genge, Gary G.

    1991-01-01

    The probabilistic design approach currently receiving attention for structural failure modes has been adapted for obtaining measured bearing wear limits in the Space Shuttle Main Engine high-pressure oxidizer turbopump. With the development of the shaft microtravel measurements to determine bearing health, an acceptance limit was neeed that protects against all known faiure modes yet is not overly conservative. This acceptance criteria limit has been successfully determined using probabilistic descriptions of preflight hardware geometry, empirical bearing wear data, mission requirements, and measurement tool precision as an input for a Monte Carlo simulation. The result of the simulation is a frequency distribution of failures as a function of preflight acceptance limits. When the distribution is converted into a reliability curve, a conscious risk management decision is made concerning the acceptance limit.

  15. Toward optimizing patient-specific IMRT QA techniques in the accurate detection of dosimetrically acceptable and unacceptable patient plans.

    PubMed

    McKenzie, Elizabeth M; Balter, Peter A; Stingo, Francesco C; Jones, Jimmy; Followill, David S; Kry, Stephen F

    2014-12-01

    The authors investigated the performance of several patient-specific intensity-modulated radiation therapy (IMRT) quality assurance (QA) dosimeters in terms of their ability to correctly identify dosimetrically acceptable and unacceptable IMRT patient plans, as determined by an in-house-designed multiple ion chamber phantom used as the gold standard. A further goal was to examine optimal threshold criteria that were consistent and based on the same criteria among the various dosimeters. The authors used receiver operating characteristic (ROC) curves to determine the sensitivity and specificity of (1) a 2D diode array undergoing anterior irradiation with field-by-field evaluation, (2) a 2D diode array undergoing anterior irradiation with composite evaluation, (3) a 2D diode array using planned irradiation angles with composite evaluation, (4) a helical diode array, (5) radiographic film, and (6) an ion chamber. This was done with a variety of evaluation criteria for a set of 15 dosimetrically unacceptable and 9 acceptable clinical IMRT patient plans, where acceptability was defined on the basis of multiple ion chamber measurements using independent ion chambers and a phantom. The area under the curve (AUC) on the ROC curves was used to compare dosimeter performance across all thresholds. Optimal threshold values were obtained from the ROC curves while incorporating considerations for cost and prevalence of unacceptable plans. Using common clinical acceptance thresholds, most devices performed very poorly in terms of identifying unacceptable plans. Grouping the detector performance based on AUC showed two significantly different groups. The ion chamber, radiographic film, helical diode array, and anterior-delivered composite 2D diode array were in the better-performing group, whereas the anterior-delivered field-by-field and planned gantry angle delivery using the 2D diode array performed less well. Additionally, based on the AUCs, there was no significant difference

  16. Assessing agreement with relative area under the coverage probability curve.

    PubMed

    Barnhart, Huiman X

    2016-08-15

    There has been substantial statistical literature in the last several decades on assessing agreement, and coverage probability approach was selected as a preferred index for assessing and improving measurement agreement in a core laboratory setting. With this approach, a satisfactory agreement is based on pre-specified high satisfactory coverage probability (e.g., 95%), given one pre-specified acceptable difference. In practice, we may want to have quality control on more than one pre-specified differences, or we may simply want to summarize the agreement based on differences up to a maximum acceptable difference. We propose to assess agreement via the coverage probability curve that provides a full spectrum of measurement error at various differences/disagreement. Relative area under the coverage probability curve is proposed for the summary of overall agreement, and this new summary index can be used for comparison of different intra-methods or inter-methods/labs/observers' agreement. Simulation studies and a blood pressure example are used for illustration of the methodology. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  17. Task Assignment and Path Planning for Multiple Autonomous Underwater Vehicles Using 3D Dubins Curves

    PubMed Central

    Zhang, Meiyan; Zheng, Yahong Rosa

    2017-01-01

    This paper investigates the task assignment and path planning problem for multiple AUVs in three dimensional (3D) underwater wireless sensor networks where nonholonomic motion constraints of underwater AUVs in 3D space are considered. The multi-target task assignment and path planning problem is modeled by the Multiple Traveling Sales Person (MTSP) problem and the Genetic Algorithm (GA) is used to solve the MTSP problem with Euclidean distance as the cost function and the Tour Hop Balance (THB) or Tour Length Balance (TLB) constraints as the stop criterion. The resulting tour sequences are mapped to 2D Dubins curves in the X−Y plane, and then interpolated linearly to obtain the Z coordinates. We demonstrate that the linear interpolation fails to achieve G1 continuity in the 3D Dubins path for multiple targets. Therefore, the interpolated 3D Dubins curves are checked against the AUV dynamics constraint and the ones satisfying the constraint are accepted to finalize the 3D Dubins curve selection. Simulation results demonstrate that the integration of the 3D Dubins curve with the MTSP model is successful and effective for solving the 3D target assignment and path planning problem. PMID:28696377

  18. Task Assignment and Path Planning for Multiple Autonomous Underwater Vehicles Using 3D Dubins Curves †.

    PubMed

    Cai, Wenyu; Zhang, Meiyan; Zheng, Yahong Rosa

    2017-07-11

    This paper investigates the task assignment and path planning problem for multiple AUVs in three dimensional (3D) underwater wireless sensor networks where nonholonomic motion constraints of underwater AUVs in 3D space are considered. The multi-target task assignment and path planning problem is modeled by the Multiple Traveling Sales Person (MTSP) problem and the Genetic Algorithm (GA) is used to solve the MTSP problem with Euclidean distance as the cost function and the Tour Hop Balance (THB) or Tour Length Balance (TLB) constraints as the stop criterion. The resulting tour sequences are mapped to 2D Dubins curves in the X - Y plane, and then interpolated linearly to obtain the Z coordinates. We demonstrate that the linear interpolation fails to achieve G 1 continuity in the 3D Dubins path for multiple targets. Therefore, the interpolated 3D Dubins curves are checked against the AUV dynamics constraint and the ones satisfying the constraint are accepted to finalize the 3D Dubins curve selection. Simulation results demonstrate that the integration of the 3D Dubins curve with the MTSP model is successful and effective for solving the 3D target assignment and path planning problem.

  19. Curve Boxplot: Generalization of Boxplot for Ensembles of Curves.

    PubMed

    Mirzargar, Mahsa; Whitaker, Ross T; Kirby, Robert M

    2014-12-01

    In simulation science, computational scientists often study the behavior of their simulations by repeated solutions with variations in parameters and/or boundary values or initial conditions. Through such simulation ensembles, one can try to understand or quantify the variability or uncertainty in a solution as a function of the various inputs or model assumptions. In response to a growing interest in simulation ensembles, the visualization community has developed a suite of methods for allowing users to observe and understand the properties of these ensembles in an efficient and effective manner. An important aspect of visualizing simulations is the analysis of derived features, often represented as points, surfaces, or curves. In this paper, we present a novel, nonparametric method for summarizing ensembles of 2D and 3D curves. We propose an extension of a method from descriptive statistics, data depth, to curves. We also demonstrate a set of rendering and visualization strategies for showing rank statistics of an ensemble of curves, which is a generalization of traditional whisker plots or boxplots to multidimensional curves. Results are presented for applications in neuroimaging, hurricane forecasting and fluid dynamics.

  20. Closed loop engine control for regulating NOx emissions, using a two-dimensional fuel-air curve

    DOEpatents

    Bourn, Gary D.; Smith, Jack A.; Gingrich, Jess W.

    2007-01-30

    An engine control strategy that ensures that NOx emissions from the engine will be maintained at an acceptable level. The control strategy is based on a two-dimensional fuel-air curve, in which air manifold pressure (AMP) is a function of fuel header pressure and engine speed. The control strategy provides for closed loop NOx adjustment to a base AMP value derived from the fuel-air curve.

  1. Geometric effects resulting from square and circular confinements for a particle constrained to a space curve

    NASA Astrophysics Data System (ADS)

    Wang, Yong-Long; Lai, Meng-Yun; Wang, Fan; Zong, Hong-Shi; Chen, Yan-Feng

    2018-04-01

    Investigating the geometric effects resulting from the detailed behaviors of the confining potential, we consider square and circular confinements to constrain a particle to a space curve. We find a torsion-induced geometric potential and a curvature-induced geometric momentum just in the square case, while a geometric gauge potential solely in the circular case. In the presence of electromagnetic field, a geometrically induced magnetic moment couples with magnetic field as an induced Zeeman coupling only for the circular confinement also. As spin-orbit interaction is considered, we find some additional terms for the spin-orbit coupling, which are induced not only by torsion, but also curvature. Moreover, in the circular case, the spin also couples with an intrinsic angular momentum, which describes the azimuthal motions mapped on the space curve. As an important conclusion for the thin-layer quantization approach, some substantial geometric effects result from the confinement boundaries. Finally, these results are proved on a helical wire.

  2. Flight-test evaluation of STOL control and flight director concepts in a powered-lift aircraft flying curved decelerating approaches

    NASA Technical Reports Server (NTRS)

    Hindson, W. S.; Hardy, G. H.; Innis, R. C.

    1981-01-01

    Flight tests were carried out to assess the feasibility of piloted steep curved, and decelerating approach profiles in powered lift STOL aircraft. Several STOL control concepts representative of a variety of aircraft were evaluated in conjunction with suitably designed flight directions. The tests were carried out in a real navigation environment, employed special electronic cockpit displays, and included the development of the performance achieved and the control utilization involved in flying 180 deg turning, descending, and decelerating approach profiles to landing. The results suggest that such moderately complex piloted instrument approaches may indeed be feasible from a pilot acceptance point of view, given an acceptable navigation environment. Systems with the capability of those used in this experiment can provide the potential of achieving instrument operations on curved, descending, and decelerating landing approaches to weather minima corresponding to CTOL Category 2 criteria, while also providing a means of realizing more efficient operations during visual flight conditions.

  3. Relationships of consumer sensory ratings, marbling score, and shear force value to consumer acceptance of beef strip loin steaks.

    PubMed

    Platter, W J; Tatum, J D; Belk, K E; Chapman, P L; Scanga, J A; Smith, G C

    2003-11-01

    Logistic regression was used to quantify and characterize the effects of changes in marbling score, Warner-Bratzler shear force (WBSF), and consumer panel sensory ratings for tenderness, juiciness, or flavor on the probability of overall consumer acceptance of strip loin steaks from beef carcasses (n = 550). Consumers (n = 489) evaluated steaks for tenderness, juiciness, and flavor using nine-point hedonic scales (1 = like extremely and 9 = dislike extremely) and for overall steak acceptance (satisfied or not satisfied). Predicted acceptance of steaks by consumers was high (> 85%) when the mean consumer sensory rating for tenderness,juiciness, or flavor for a steak was 3 or lower on the hedonic scale. Conversely, predicted consumer acceptance of steaks was low (< or = 10%) when the mean consumer rating for tenderness, juiciness, or flavor for a steak was 5 or higher on the hedonic scale. As mean consumer sensory ratings for tenderness, juiciness, or flavor decreased from 3 to 5, the probability of acceptance of steaks by consumers diminished rapidly in a linear fashion. These results suggest that small changes in consumer sensory ratings for these sensory traits have dramatic effects on the probability of acceptance of steaks by consumers. Marbling score displayed a weak (adjusted R2 = 0.053), yet significant (P < 0.01), relationship to acceptance of steaks by consumers, and the shape of the predicted probability curve for steak acceptance was approximately linear over the entire range of marbling scores (Traces67 to Slightly Abundant97), suggesting that the likelihood of consumer acceptance of steaks increases approximately 10% for each full marbling score increase between Slight to Slightly Abundant. The predicted probability curve for consumer acceptance of steaks was sigmoidal for the WBSF model, with a steep decline in predicted probability of acceptance as WBSF values increased from 3.0 to 5.5 kg. Changes in WBSF within the high (> 5.5 kg) or low (< 3.0 kg

  4. Inverse Diffusion Curves Using Shape Optimization.

    PubMed

    Zhao, Shuang; Durand, Fredo; Zheng, Changxi

    2018-07-01

    The inverse diffusion curve problem focuses on automatic creation of diffusion curve images that resemble user provided color fields. This problem is challenging since the 1D curves have a nonlinear and global impact on resulting color fields via a partial differential equation (PDE). We introduce a new approach complementary to previous methods by optimizing curve geometry. In particular, we propose a novel iterative algorithm based on the theory of shape derivatives. The resulting diffusion curves are clean and well-shaped, and the final image closely approximates the input. Our method provides a user-controlled parameter to regularize curve complexity, and generalizes to handle input color fields represented in a variety of formats.

  5. Passenger Acceptance of Alignments with Frequent Curves in Maglev or Other Very-High-Speed Ground Systems

    DOT National Transportation Integrated Search

    1999-03-31

    This study explored comfort and motion-sickness effects of Maglev travel in corridors characterized by frequent curves. A procedure was developed for estimating the propensity of a given set of ride motions to induce motion sickness, generating a num...

  6. Acceptance test report for portable exhauster POR-007/Skid E

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kriskovich, J.R.

    1998-07-24

    This document describes Acceptance Testing performed on Portable Exhauster POR-007/Skid E. It includes measurements of bearing vibration levels, pressure decay testing, programmable logic controller interlocks, high vacuum, flow and pressure control functional testing. The purpose of Acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-0490, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reports (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuummore » exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document.« less

  7. NEXT Performance Curve Analysis and Validation

    NASA Technical Reports Server (NTRS)

    Saripalli, Pratik; Cardiff, Eric; Englander, Jacob

    2016-01-01

    Performance curves of the NEXT thruster are highly important in determining the thruster's ability in performing towards mission-specific goals. New performance curves are proposed and examined here. The Evolutionary Mission Trajectory Generator (EMTG) is used to verify variations in mission solutions based on both available thruster curves and the new curves generated. Furthermore, variations in BOL and EOL curves are also examined. Mission design results shown here validate the use of EMTG and the new performance curves.

  8. Preliminary Results and Learning Curve of the Minimally Invasive Chevron Akin Operation for Hallux Valgus.

    PubMed

    Jowett, Charlie R J; Bedi, Harvinder S

    Minimally invasive surgery is increasing in popularity. It is relevant in hallux valgus surgery owing to the potential for reduced disruption of the soft tissues and improved wound healing. We present our results and assess the learning curve of the minimally invasive Chevron Akin operation for hallux valgus. A total of 120 consecutive feet underwent minimally invasive Chevron Akin for symptomatic hallux valgus, of which 14 were excluded. They were followed up for a mean of 25 (range 18 to 38) months. The patients were clinically assessed using the American Orthopaedic Foot and Ankle Society score. Complications and patient satisfaction were recorded. The radiographs were analyzed and measurements recorded for hallux valgus and intermetatarsal angle correction. The mean age of the patients undergoing surgery was 55 (range 25 to 81) years. Of the 78 patients, 76 (97.4%) were female and 2 (2.6%) were male; 28 (35.9%) cases were bilateral. The mean American Orthopaedic Foot and Ankle Society score improved from 56 (range 23 to 76) preoperatively to 87 (range 50 to 100) postoperatively (p < .001). The mean hallux valgus and intermetatarsal angles preoperatively were 29.7° (range 12° to 46°) and 14.0° (range 8° to 20°). The corresponding postoperative angles were 10.3° (range 0° to 25°) and 7.6° (range 3° to 15°; p < .001). The patients were satisfied with the results of surgery in 87% of cases (92 of 106). The incidence of reoperation was 14% (15 of 106). These are the only reported results for this technique. They display a steep associated learning curve. However, the results are promising, and the learning curve is comparable to that for open hallux valgus surgery. Copyright © 2017 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  9. Sheath effects on current collection by particle detectors with narrow acceptance angles

    NASA Technical Reports Server (NTRS)

    Singh, N.; Baugher, C. R.

    1981-01-01

    Restriction of the aperture acceptance angle of an ion or electron trap on an attracting spacecraft significantly alters the volt-ampere characteristics of the instrument in a low Mach number plasma. It is shown when the angular acceptance of the aperture is restricted the current to the collector tends to be independent of the Debye length. Expressions for the RPA characteristics for both a thin sheath and a thick sheath are derived; and it is shown that as the aperture is narrowed the curves tend toward equivalence.

  10. Mentorship, learning curves, and balance.

    PubMed

    Cohen, Meryl S; Jacobs, Jeffrey P; Quintessenza, James A; Chai, Paul J; Lindberg, Harald L; Dickey, Jamie; Ungerleider, Ross M

    2007-09-01

    Professionals working in the arena of health care face a variety of challenges as their careers evolve and develop. In this review, we analyze the role of mentorship, learning curves, and balance in overcoming challenges that all such professionals are likely to encounter. These challenges can exist both in professional and personal life. As any professional involved in health care matures, complex professional skills must be mastered, and new professional skills must be acquired. These skills are both technical and judgmental. In most circumstances, these skills must be learned. In 2007, despite the continued need for obtaining new knowledge and learning new skills, the professional and public tolerance for a "learning curve" is much less than in previous decades. Mentorship is the key to success in these endeavours. The success of mentorship is two-sided, with responsibilities for both the mentor and the mentee. The benefits of this relationship must be bidirectional. It is the responsibility of both the student and the mentor to assure this bidirectional exchange of benefit. This relationship requires time, patience, dedication, and to some degree selflessness. This mentorship will ultimately be the best tool for mastering complex professional skills and maturing through various learning curves. Professional mentorship also requires that mentors identify and explicitly teach their mentees the relational skills and abilities inherent in learning the management of the triad of self, relationships with others, and professional responsibilities.Up to two decades ago, a learning curve was tolerated, and even expected, while professionals involved in healthcare developed the techniques that allowed for the treatment of previously untreatable diseases. Outcomes have now improved to the point that this type of learning curve is no longer acceptable to the public. Still, professionals must learn to perform and develop independence and confidence. The responsibility to

  11. Disease risk curves.

    PubMed

    Hughes, G; Burnett, F J; Havis, N D

    2013-11-01

    Disease risk curves are simple graphical relationships between the probability of need for treatment and evidence related to risk factors. In the context of the present article, our focus is on factors related to the occurrence of disease in crops. Risk is the probability of adverse consequences; specifically in the present context it denotes the chance that disease will reach a threshold level at which crop protection measures can be justified. This article describes disease risk curves that arise when risk is modeled as a function of more than one risk factor, and when risk is modeled as a function of a single factor (specifically the level of disease at an early disease assessment). In both cases, disease risk curves serve as calibration curves that allow the accumulated evidence related to risk to be expressed on a probability scale. When risk is modeled as a function of the level of disease at an early disease assessment, the resulting disease risk curve provides a crop loss assessment model in which the downside is denominated in terms of risk rather than in terms of yield loss.

  12. A simple procedure for synthesizing Charpy impact energy transition curves from limited test data

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosenfeld, M.J.

    1996-12-31

    The importance of Charpy V-notch testing of pipe has been well established in the pipeline industry. Until now, it has been necessary to perform a number of tests in order to develop the toughness transition curve. A method is described which makes possible forecasting the full-scale toughness transition from a single subsize test datum to an acceptable degree of accuracy. This is potentially useful where historical test results or material samples available for testing are limited in quantity. Worked examples illustrating the use of the relationships are given.

  13. A Shift in the Thermoregulatory Curve as a Result of Selection for High Activity-Related Aerobic Metabolism

    PubMed Central

    Stawski, Clare; Koteja, Paweł; Sadowska, Edyta T.

    2017-01-01

    According to the “aerobic capacity model,” endothermy in birds and mammals evolved as a result of natural selection favoring increased persistent locomotor activity, fuelled by aerobic metabolism. However, this also increased energy expenditure even during rest, with the lowest metabolic rates occurring in the thermoneutral zone (TNZ) and increasing at ambient temperatures (Ta) below and above this range, depicted by the thermoregulatory curve. In our experimental evolution system, four lines of bank voles (Myodes glareolus) have been selected for high swim-induced aerobic metabolism and four unselected lines have been maintained as a control. In addition to a 50% higher rate of oxygen consumption during swimming, the selected lines have also evolved a 7.3% higher mass-adjusted basal metabolic rate. Therefore, we asked whether voles from selected lines would also display a shift in the thermoregulatory curve and an increased body temperature (Tb) during exposure to high Ta. To test these hypotheses we measured the RMR and Tb of selected and control voles at Ta from 10 to 34°C. As expected, RMR within and around the TNZ was higher in selected lines. Further, the Tb of selected lines within the TNZ was greater than the Tb of control lines, particularly at the maximum measured Ta of 34°C, suggesting that selected voles are more prone to hyperthermia. Interestingly, our results revealed that while the slope of the thermoregulatory curve below the lower critical temperature (LCT) is significantly lower in the selected lines, the LCT (26.1°C) does not differ. Importantly, selected voles also evolved a higher maximum thermogenesis, but thermal conductance did not increase. As a consequence, the minimum tolerated temperature, calculated from an extrapolation of the thermoregulatory curve, is 8.4°C lower in selected (−28.6°C) than in control lines (−20.2°C). Thus, selection for high aerobic exercise performance, even though operating under thermally neutral

  14. A Shift in the Thermoregulatory Curve as a Result of Selection for High Activity-Related Aerobic Metabolism.

    PubMed

    Stawski, Clare; Koteja, Paweł; Sadowska, Edyta T

    2017-01-01

    According to the "aerobic capacity model," endothermy in birds and mammals evolved as a result of natural selection favoring increased persistent locomotor activity, fuelled by aerobic metabolism. However, this also increased energy expenditure even during rest, with the lowest metabolic rates occurring in the thermoneutral zone (TNZ) and increasing at ambient temperatures (T a ) below and above this range, depicted by the thermoregulatory curve. In our experimental evolution system, four lines of bank voles ( Myodes glareolus ) have been selected for high swim-induced aerobic metabolism and four unselected lines have been maintained as a control. In addition to a 50% higher rate of oxygen consumption during swimming, the selected lines have also evolved a 7.3% higher mass-adjusted basal metabolic rate. Therefore, we asked whether voles from selected lines would also display a shift in the thermoregulatory curve and an increased body temperature (T b ) during exposure to high T a . To test these hypotheses we measured the RMR and T b of selected and control voles at T a from 10 to 34°C. As expected, RMR within and around the TNZ was higher in selected lines. Further, the T b of selected lines within the TNZ was greater than the T b of control lines, particularly at the maximum measured T a of 34°C, suggesting that selected voles are more prone to hyperthermia. Interestingly, our results revealed that while the slope of the thermoregulatory curve below the lower critical temperature (LCT) is significantly lower in the selected lines, the LCT (26.1°C) does not differ. Importantly, selected voles also evolved a higher maximum thermogenesis, but thermal conductance did not increase. As a consequence, the minimum tolerated temperature, calculated from an extrapolation of the thermoregulatory curve, is 8.4°C lower in selected (-28.6°C) than in control lines (-20.2°C). Thus, selection for high aerobic exercise performance, even though operating under thermally

  15. Cochlear microphonic broad tuning curves

    NASA Astrophysics Data System (ADS)

    Ayat, Mohammad; Teal, Paul D.; Searchfield, Grant D.; Razali, Najwani

    2015-12-01

    It is known that the cochlear microphonic voltage exhibits much broader tuning than does the basilar membrane motion. The most commonly used explanation for this is that when an electrode is inserted at a particular point inside the scala media, the microphonic potentials of neighbouring hair cells have different phases, leading to cancelation at the electrodes location. In situ recording of functioning outer hair cells (OHCs) for investigating this hypothesis is exceptionally difficult. Therefore, to investigate the discrepancy between the tuning curves of the basilar membrane and those of the cochlear microphonic, and the effect of phase cancellation of adjacent hair cells on the broadness of the cochlear microphonic tuning curves, we use an electromechanical model of the cochlea to devise an experiment. We explore the effect of adjacent hair cells (i.e., longitudinal phase cancellation) on the broadness of the cochlear microphonic tuning curves in different locations. The results of the experiment indicate that active longitudinal coupling (i.e., coupling with active adjacent outer hair cells) only slightly changes the broadness of the CM tuning curves. The results also demonstrate that there is a π phase difference between the potentials produced by the hair bundle and the soma near the place associated with the characteristic frequency based on place-frequency maps (i.e., the best place). We suggest that the transversal phase cancellation (caused by the phase difference between the hair bundle and the soma) plays a far more important role than longitudinal phase cancellation in the broadness of the cochlear microphonic tuning curves. Moreover, by increasing the modelled longitudinal resistance resulting the cochlear microphonic curves exhibiting sharper tuning. The results of the simulations suggest that the passive network of the organ of Corti determines the phase difference between the hair bundle and soma, and hence determines the sharpness of the

  16. Cassini RTG acceptance test results and RTG performance on Galileo and Ulysses

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kelly, C.E.; Klee, P.M.

    Flight acceptance testing has been completed for the RTGs to be used on the Cassini spacecraft which is scheduled for an October 6, 1997 launch to Saturn. The acceptance test program includes vibration tests, magnetic field measurements, mass properties (weight and c.g.) and thermal vacuum test. This paper presents the thermal vacuum test results. Three RTGs are to be used, F-2, F-6, and F-7. F-5 is the backup RTG, as it was for the Galileo and Ulysses missions launched in 1989 and 1990, respectively. RTG performance measured during the thermal vacuum tests carried out at the Mound Laboratory facility metmore » all specification requirements. Beginning of mission (BOM) and end of mission (EOM) power predictions have been made based on these tests results. BOM power is predicted to be 888 watts compared to the minimum requirement of 826 watts. Degradation models predict the EOM power after 16 years is to be 640 watts compared to a minimum requirement of 596 watts. Results of small scale module tests are also shown. The modules contain couples from the qualification and flight production runs. The tests have exceeded 28,000 hours (3.2 years) and are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. All test results indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of over 5% are predicted. Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Telemetry data are also shown for the RTG on the Ulysses spacecraft which completed its planned mission in 1995 and is now in the extended mission.« less

  17. Cassini RTG acceptance test results and RTG performance on Galileo and Ulysses

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kelly, C.E.; Klee, P.M.

    Flight acceptance testing has been completed for the RTGs to be used on the Cassini spacecraft which is scheduled for an October 6, 1997 launch to Saturn. The acceptance test program includes vibration tests, magnetic field measurements, properties (weight and c.g.) and thermal vacuum test. This paper presents The thermal vacuum test results. Three RTGs are to be used, F-2, F-6, and F-7. F-5 is tile back-up RTG, as it was for the Galileo and Ulysses missions launched in 1989 and 1990, respectively. RTG performance measured during the thermal vacuum tests carried out at die Mound Laboratory facility met allmore » specification requirements. Beginning of mission (BOM) and end of mission (EOM) power predictions have been made based on than tests results. BOM power is predicted to be 888 watts compared to the minimum requirement of 826 watts. Degradation models predict the EOM power after 16 years is to be 640 watts compared to a minimum requirement of 596 watts. Results of small scale module tests are also showing. The modules contain couples from the qualification and flight production runs. The tests have exceeded 28,000 hours (3.2 years) and are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. All test results indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of over five percent are predicted. Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Telemetry data are also shown for the RTG on the Ulysses spacecraft which completed its planned mission in 1995 and is now in the extended mission.« less

  18. Cassini RTG Acceptance Test Results and RTG Performance on Galileo and Ulysses

    DOE R&D Accomplishments Database

    Kelly, C. E.; Klee, P. M.

    1997-06-01

    Flight acceptance testing has been completed for the RTGs to be used on the Cassini spacecraft which is scheduled for an October 6, 1997 launch to Saturn. The acceptance test program includes vibration tests, magnetic field measurements, properties (weight and c.g.) and thermal vacuum test. This paper presents The thermal vacuum test results. Three RTGs are to be used, F 2, F 6, and F 7. F 5 is tile back up RTG, as it was for the Galileo and Ulysses missions launched in 1989 and 1990, respectively. RTG performance measured during the thermal vacuum tests carried out at die Mound Laboratory facility met all specification requirements. Beginning of mission (BOM) and end of mission (EOM) power predictions have been made based on than tests results. BOM power is predicted to be 888 watts compared to the minimum requirement of 826 watts. Degradation models predict the EOM power after 16 years is to be 640 watts compared to a minimum requirement of 596 watts. Results of small scale module tests are also showing. The modules contain couples from the qualification and flight production runs. The tests have exceeded 28,000 hours (3.2 years) and are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. All test results indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of over five percent are predicted. Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Telemetry data are also shown for the RTG on the Ulysses spacecraft which completed its planned mission in 1995 and is now in the extended mission.

  19. Bayesian analysis of stage-fall-discharge rating curves and their uncertainties

    NASA Astrophysics Data System (ADS)

    Mansanarez, Valentin; Le Coz, Jérôme; Renard, Benjamin; Lang, Michel; Pierrefeu, Gilles; Le Boursicaud, Raphaël; Pobanz, Karine

    2016-04-01

    Stage-fall-discharge (SFD) rating curves are traditionally used to compute streamflow records at sites where the energy slope of the flow is variable due to variable backwater effects. Building on existing Bayesian approaches, we introduce an original hydraulics-based method for developing SFD rating curves used at twin gauge stations and estimating their uncertainties. Conventional power functions for channel and section controls are used, and transition to a backwater-affected channel control is computed based on a continuity condition, solved either analytically or numerically. The difference between the reference levels at the two stations is estimated as another uncertain parameter of the SFD model. The method proposed in this presentation incorporates information from both the hydraulic knowledge (equations of channel or section controls) and the information available in the stage-fall-discharge observations (gauging data). The obtained total uncertainty combines the parametric uncertainty and the remnant uncertainty related to the model of rating curve. This method provides a direct estimation of the physical inputs of the rating curve (roughness, width, slope bed, distance between twin gauges, etc.). The performance of the new method is tested using an application case affected by the variable backwater of a run-of-the-river dam: the Rhône river at Valence, France. In particular, a sensitivity analysis to the prior information and to the gauging dataset is performed. At that site, the stage-fall-discharge domain is well documented with gaugings conducted over a range of backwater affected and unaffected conditions. The performance of the new model was deemed to be satisfactory. Notably, transition to uniform flow when the overall range of the auxiliary stage is gauged is correctly simulated. The resulting curves are in good agreement with the observations (gaugings) and their uncertainty envelopes are acceptable for computing streamflow records. Similar

  20. Factors affecting and affected by user acceptance of computer-based nursing documentation: results of a two-year study.

    PubMed

    Ammenwerth, Elske; Mansmann, Ulrich; Iller, Carola; Eichstädter, Ronald

    2003-01-01

    The documentation of the nursing process is an important but often neglected part of clinical documentation. Paper-based systems have been introduced to support nursing process documentation. Frequently, however, problems such as low quality of documentation are reported. It is unclear whether computer-based documentation systems can reduce these problems and which factors influence their acceptance by users. We introduced a computer-based nursing documentation system on four wards of the University Hospitals of Heidelberg and systematically evaluated its preconditions and its effects in a pretest-posttest intervention study. For the analysis of user acceptance, we concentrated on subjective data drawn from questionnaires and interviews. A questionnaire was developed using items from published questionnaires and items that had to be developed for the special purpose of this study. The quantitative results point to two factors influencing the acceptance of a new computer-based documentation system: the previous acceptance of the nursing process and the previous amount of self-confidence when using computers. On one ward, the diverse acceptance scores heavily declined after the introduction of the nursing documentation system. Explorative qualitative analysis on this ward points to further success factors of computer-based nursing documentation systems. Our results can be used to assist the planning and introduction of computer-based nursing documentation systems. They demonstrate the importance of computer experience and acceptance of the nursing process on a ward but also point to other factors such as the fit between nursing workflow and the functionality of a nursing documentation system.

  1. [Results of the marketing research study "Acceptance of physician's office computer systems"].

    PubMed

    Steinhausen, D; Brinkmann, F; Engelhard, A

    1998-01-01

    We report on a market research study on the acceptance of computer systems in surgeries. 11,000 returned questionnaires of surgeons--user and nonuser--were analysed. We found out that most of the surgeons used their computers in a limited way, i.e. as a device for accounting. Concerning the level of utilisation there are differentials of Men-Women, West-East and Young-Old. In this study we also analysed the computer using behaviour of gynaecologic surgeons. As a result two third of all nonusers are not intending to utilise a computer in the future.

  2. Acceptance test report for portable exhauster POR-008/Skid F

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kriskovich, J.R.

    1998-07-24

    Portable Exhauster POR-008 was procured via HNF-0490, Specification for a Portable Exhausted System for Waste Tank Ventilation. Prior to taking ownership, acceptance testing was performed at the vendors. However at the conclusion of testing a number of issues remained that required resolution before the exhausters could be used by Project W-320. The purpose of acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-O49O, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reportsmore » (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuum exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document.« less

  3. Compression of contour data through exploiting curve-to-curve dependence

    NASA Technical Reports Server (NTRS)

    Yalabik, N.; Cooper, D. B.

    1975-01-01

    An approach to exploiting curve-to-curve dependencies in order to achieve high data compression is presented. One of the approaches to date of along curve compression through use of cubic spline approximation is taken and extended by investigating the additional compressibility achievable through curve-to-curve structure exploitation. One of the models under investigation is reported on.

  4. A flight investigation with a STOL airplane flying curved, descending instrument approach paths

    NASA Technical Reports Server (NTRS)

    Benner, M. S.; Mclaughlin, M. D.; Sawyer, R. H.; Vangunst, R.; Ryan, J. L.

    1974-01-01

    A flight investigation using a De Havilland Twin Otter airplane was conducted to determine the configurations of curved, 6 deg descending approach paths which would provide minimum airspace usage within the requirements for acceptable commercial STOL airplane operations. Path configurations with turns of 90 deg, 135 deg, and 180 deg were studied; the approach airspeed was 75 knots. The length of the segment prior to turn, the turn radius, and the length of the final approach segment were varied. The relationship of the acceptable path configurations to the proposed microwave landing system azimuth coverage requirements was examined.

  5. Why the Kantian ideal survives medical learning curves, and why it matters.

    PubMed

    Brecher, B

    2006-09-01

    The "Kantian ideal" is often misunderstood as invoking individual autonomy rather than rational self legislation. Le Morvan and Stock's otherwise insightful discussion of "Medical learning curves and the Kantian ideal"--for example--draws the mistaken inference that that ideal is inconsistent with the realities of medical practice. But it is not. Rationally to be a patient entails accepting its necessary conditions.

  6. Learning curve for intracranial angioplasty and stenting in single center.

    PubMed

    Cai, Qiankun; Li, Yongkun; Xu, Gelin; Sun, Wen; Xiong, Yunyun; Sun, Wenshan; Bao, Yuanfei; Huang, Xianjun; Zhang, Yao; Zhou, Lulu; Zhu, Wusheng; Liu, Xinfeng

    2014-01-01

    To identify the specific caseload to overcome learning curve effect based on data from consecutive patients treated with Intracranial Angioplasty and Stenting (IAS) in our center. The Stenting and Aggressive Medical Management for Preventing Recurrent Stroke and Intracranial Stenosis trial was prematurely terminated owing to the high rate of periprocedural complications in the endovascular arm. To date, there are no data available for determining the essential caseload sufficient to overcome the learning effect and perform IAS with an acceptable level of complications. Between March 2004 and May 2012, 188 consecutive patients with 194 lesions who underwent IAS were analyzed retrospectively. The outcome variables used to assess the learning curve were periprocedural complications (included transient ischemic attack, ischemic stroke, vessel rupture, cerebral hyperperfusion syndrome, and vessel perforation). Multivariable logistic regression analysis was employed to illustrate the existence of learning curve effect on IAS. A risk-adjusted cumulative sum chart was performed to identify the specific caseload to overcome learning curve effect. The overall rate of 30-days periprocedural complications was 12.4% (24/194). After adjusting for case-mix, multivariate logistic regression analysis showed that operator experience was an independent predictor for periprocedural complications. The learning curve of IAS to overcome complications in a risk-adjusted manner was 21 cases. Operator's level of experience significantly affected the outcome of IAS. Moreover, we observed that the amount of experience sufficient for performing IAS in our center was 21 cases. Copyright © 2013 Wiley Periodicals, Inc.

  7. The deformable secondary mirror of VLT: final electro-mechanical and optical acceptance test results

    NASA Astrophysics Data System (ADS)

    Briguglio, Runa; Biasi, Roberto; Xompero, Marco; Riccardi, Armando; Andrighettoni, Mario; Pescoller, Dietrich; Angerer, Gerald; Gallieni, Daniele; Vernet, Elise; Kolb, Johann; Arsenault, Robin; Madec, Pierre-Yves

    2014-07-01

    The Deformable Secondary Mirror (DSM) for the VLT ended the stand-alone electro-mechanical and optical acceptance process, entering the test phase as part of the Adaptive Optics Facility (AOF) at the ESO Headquarter (Garching). The VLT-DSM currently represents the most advanced already-built large-format deformable mirror with its 1170 voice-coil actuators and its internal metrology based on co-located capacitive sensors to control the shape of the 1.12m-diameter 2mm-thick convex shell. The present paper reports the final results of the electro-mechanical and optical characterization of the DSM executed in a collaborative effort by the DSM manufacturing companies (Microgate s.r.l. and A.D.S. International s.r.l.), INAF-Osservatorio Astrofisico di Arcetri and ESO. The electro-mechanical acceptance tests have been performed in the company premises and their main purpose was the dynamical characterization of the internal control loop response and the calibration of the system data that are needed for its optimization. The optical acceptance tests have been performed at ESO (Garching) using the ASSIST optical test facility. The main purpose of the tests are the characterization of the optical shell flattening residuals, the corresponding calibration of flattening commands, the optical calibration of the capacitive sensors and the optical calibration of the mirror influence functions.

  8. Adapting ISA system warnings to enhance user acceptance.

    PubMed

    Jiménez, Felipe; Liang, Yingzhen; Aparicio, Francisco

    2012-09-01

    Inappropriate speed is a major cause of traffic accidents. Different measures have been considered to control traffic speed, and intelligent speed adaptation (ISA) systems are one of the alternatives. These systems know the speed limits and try to improve compliance with them. This paper deals with an informative ISA system that provides the driver with an advance warning before reaching a road section with singular characteristics that require a lower safe speed than the current speed. In spite of the extensive tests performed using ISA systems, few works show how warnings can be adapted to the driver. This paper describes a method to adapt warning parameters (safe speed on curves, zone of influence of a singular stretch, deceleration process and reaction time) to normal driving behavior. The method is based on a set of tests with and without the ISA system. This adjustment, as well as the analysis of driver acceptance before and after the adaptation and changes in driver behavior (changes in speed and path) resulting from the tested ISA regarding a driver's normal driving style, is shown in this paper. The main conclusion is that acceptance by drivers increased significantly after redefining the warning parameters, but the effect of speed homogenization was not reduced. Copyright © 2010 Elsevier Ltd. All rights reserved.

  9. Cervical VEMP threshold response curve in the identification of Ménière's disease.

    PubMed

    Zhu, Yi; McPherson, James; Beatty, Charles; Driscoll, Colin; Neff, Brian; Eggers, Scott; Shepard, Neil T

    2014-03-01

    To investigate the sensitivity/specificity of a shift upward in the most sensitive frequency of the cervical vestibular evoked myogenic potential (cVEMP) threshold-response curve in the identification of Ménière's disease (MD). A secondary purpose was to investigate the clinical characteristics that had an impact on the sensitivity/specificity and to adjust the criteria for a positive shift upward in the cVEMP curve to maximize performance of the test. A retrospective review of patients diagnosed with MD and those without MD. Two hundred ninety-four patients met the inclusion criteria of symptom complaints of spontaneous events of vertigo and a full vestibular and balance evaluation with cVEMP threshold-response curve testing. Two hundred six of these patients were diagnosed with MD, and 88 patients were determined to be non-MD. Review of the patients' medical records was used to extract data on the results of the cVEMP curve, age, gender, duration from time of onset of spontaneous events, pure tone average from hearing test, and water caloric asymmetry. Student's t-test, χ² test, receiver operating characteristic (ROC) curve with area under the curve (AUC), Pearson correlation coefficient, and sensitivity/specificity from 2 × 2 tables were all used in the analysis. Basic sensitivity/specificity for a shift upward in the most sensitive frequency to 1000 Hz in the cVEMP threshold-response curve was 0.47/0.64 respectively. Clinical characteristics that were found to have a significant impact on the sensitivity/specificity were age equal to or above 60 yr and a caloric asymmetry ≥25%. Various combinations of age and caloric with the requirement of a shift upward in the cVEMP curve most sensitive frequency to 1000 Hz resulted in significant but modest improvements in sensitivity/specificity. However, the overall performance was not shown acceptable for routine clinical use with maximum sensitivity at 0.73. Therefore, placing an emphasis on specificity over

  10. Single curved fiber sedimentation under gravity

    Treesearch

    Xiaoying Rong; Dewei Qi; Junyong Zhu

    2005-01-01

    Dynamics of single curved fiber sedimentation under the gravity are simulated by using lattice Boltzmann method. The results of migration and rotation of the curved fiber at different Reynolds numbers are reported. The results show that the rotation and migration processes are sensitive to the curvature of the fiber.

  11. Single curved fiber sedimentation under gravity

    Treesearch

    Xiaoying Rong; Dewei Qi; Guowei He; Jun Yong Zhu; Tim Scott

    2008-01-01

    Dynamics of single curved fiber sedimentation under gravity are simulated by using the lattice Boltzmann method. The results of migration and rotation of the curved fiber at different Reynolds numbers are reported. The results show that the rotation and migration processes are sensitive to the curvature of the fiber.

  12. Cumulative sum analysis score and phacoemulsification competency learning curve.

    PubMed

    Vedana, Gustavo; Cardoso, Filipe G; Marcon, Alexandre S; Araújo, Licio E K; Zanon, Matheus; Birriel, Daniella C; Watte, Guilherme; Jun, Albert S

    2017-01-01

    To use the cumulative sum analysis score (CUSUM) to construct objectively the learning curve of phacoemulsification competency. Three second-year residents and an experienced consultant were monitored for a series of 70 phacoemulsification cases each and had their series analysed by CUSUM regarding posterior capsule rupture (PCR) and best-corrected visual acuity. The acceptable rate for PCR was <5% (lower limit h) and the unacceptable rate was >10% (upper limit h). The acceptable rate for best-corrected visual acuity worse than 20/40 was <10% (lower limit h) and the unacceptable rate was >20% (upper limit h). The area between lower limit h and upper limit h is called the decision interval. There was no statistically significant difference in the mean age, sex or cataract grades between groups. The first trainee achieved PCR CUSUM competency at his 22 nd case. His best-corrected visual acuity CUSUM was in the decision interval from his third case and stayed there until the end, never reaching competency. The second trainee achieved PCR CUSUM competency at his 39 th case. He could reach best-corrected visual acuity CUSUM competency at his 22 nd case. The third trainee achieved PCR CUSUM competency at his 41 st case. He reached best-corrected visual acuity CUSUM competency at his 14 th case. The learning curve of competency in phacoemulsification is constructed by CUSUM and in average took 38 cases for each trainee to achieve it.

  13. Application of a Novel DCPD Adjustment Method for the J-R Curve Characterization: A study based on ORNL and ASTM Interlaboratory Results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chen, Xiang; Sokolov, Mikhail A; Nanstad, Randy K

    Material fracture toughness in the fully ductile region can be described by a J-integral vs. crack growth resistance curve (J-R curve). As a conventional J-R curve measurement method, the elastic unloading compliance (EUC) method becomes impractical for elevated temperature testing due to relaxation of the material and friction induced back-up shape of the J-R curve. One alternative solution of J-R curve testing applies the Direct Current Potential Drop (DCPD) technique for measuring crack extension. However, besides crack growth, potential drop can also be influenced by plastic deformation, crack tip blunting, etc., and uncertainties exist in the current DCPD methodology especiallymore » in differentiating potential drop due to stable crack growth and due to material deformation. Thus, using DCPD for J-R curve determination remains a challenging task. In this study, a new adjustment procedure for applying DCPD to derive the J-R curve has been developed for conventional fracture toughness specimens, including compact tension, three-point bend, and disk-shaped compact specimens. Data analysis has been performed on Oak Ridge National Laboratory (ORNL) and American Society for Testing and Materials (ASTM) interlaboratory results covering different specimen thicknesses, test temperatures, and materials, to evaluate the applicability of the new DCPD adjustment procedure for J-R curve characterization. After applying the newly-developed procedure, direct comparison between the DCPD method and the normalization method on the same specimens indicated close agreement for the overall J-R curves, as well as the provisional values of fracture toughness near the onset of ductile crack extension, Jq, and of tearing modulus.« less

  14. Why the Kantian ideal survives medical learning curves, and why it matters

    PubMed Central

    Brecher, B

    2006-01-01

    The “Kantian ideal” is often misunderstood as invoking individual autonomy rather than rational self legislation. Le Morvan and Stock's otherwise insightful discussion of “Medical learning curves and the Kantian ideal”—for example—draws the mistaken inference that that ideal is inconsistent with the realities of medical practice. But it is not. Rationally to be a patient entails accepting its necessary conditions. PMID:16943330

  15. Polynomial Functions Resulting from the Multiplication of Curves in the Framework of the Research and Study Paths

    ERIC Educational Resources Information Center

    Llanos, Viviana Carolina; Otero, Maria Rita; Rojas, Emmanuel Colombo

    2015-01-01

    This paper presents the results of a research, which proposes the introduction of the teaching by Research and Study Paths (RSPs) into Argentinean secondary schools within the frame of the Anthropologic Theory of Didactics (ATD). The paths begin with the study of "Q[subscript 0]: How to operate with any curves knowing only its graphic…

  16. Higher Flexibility and Better Immediate Spontaneous Correction May Not Gain Better Results for Nonstructural Thoracic Curve in Lenke 5C AIS Patients

    PubMed Central

    Zhang, Yanbin; Lin, Guanfeng; Wang, Shengru; Zhang, Jianguo; Shen, Jianxiong; Wang, Yipeng; Guo, Jianwei; Yang, Xinyu; Zhao, Lijuan

    2016-01-01

    Study Design. Retrospective study. Objective. To study the behavior of the unfused thoracic curve in Lenke type 5C during the follow-up and to identify risk factors for its correction loss. Summary of Background Data. Few studies have focused on the spontaneous behaviors of the unfused thoracic curve after selective thoracolumbar or lumbar fusion during the follow-up and the risk factors for spontaneous correction loss. Methods. We retrospectively reviewed 45 patients (41 females and 4 males) with AIS who underwent selective TL/L fusion from 2006 to 2012 in a single institution. The follow-up averaged 36 months (range, 24–105 months). Patients were divided into two groups. Thoracic curves in group A improved or maintained their curve magnitude after spontaneous correction, with a negative or no correction loss during the follow-up. Thoracic curves in group B deteriorated after spontaneous correction with a positive correction loss. Univariate analysis and multivariate analysis were built to identify the risk factors for correction loss of the unfused thoracic curves. Results. The minor thoracic curve was 26° preoperatively. It was corrected to 13° immediately with a spontaneous correction of 48.5%. At final follow-up it was 14° with a correction loss of 1°. Thoracic curves did not deteriorate after spontaneous correction in 23 cases in group A, while 22 cases were identified with thoracic curve progressing in group B. In multivariate analysis, two risk factors were independently associated with thoracic correction loss: higher flexibility and better immediate spontaneous correction rate of thoracic curve. Conclusion. Posterior selective TL/L fusion with pedicle screw constructs is an effective treatment for Lenke 5C AIS patients. Nonstructural thoracic curves with higher flexibility or better immediate correction are more likely to progress during the follow-up and close attentions must be paid to these patients in case of decompensation. Level of Evidence: 4

  17. Water retention curve for hydrate-bearing sediments

    NASA Astrophysics Data System (ADS)

    Dai, Sheng; Santamarina, J. Carlos

    2013-11-01

    water retention curve plays a central role in numerical algorithms that model hydrate dissociation in sediments. The determination of the water retention curve for hydrate-bearing sediments faces experimental difficulties, and most studies assume constant water retention curves regardless of hydrate saturation. This study employs network model simulation to investigate the water retention curve for hydrate-bearing sediments. Results show that (1) hydrate in pores shifts the curve to higher capillary pressures and the air entry pressure increases as a power function of hydrate saturation; (2) the air entry pressure is lower in sediments with patchy rather than distributed hydrate, with higher pore size variation and pore connectivity or with lower specimen slenderness along the flow direction; and (3) smaller specimens render higher variance in computed water retention curves, especially at high water saturation Sw > 0.7. Results are relevant to other sediment pore processes such as bioclogging and mineral precipitation.

  18. Establishment of IDF-curves for precipitation in the tropical area of Central Africa - comparison of techniques and results

    NASA Astrophysics Data System (ADS)

    Mohymont, B.; Demarée, G. R.; Faka, D. N.

    2004-05-01

    The establishment of Intensity-Duration-Frequency (IDF) curves for precipitation remains a powerful tool in the risk analysis of natural hazards. Indeed the IDF-curves allow for the estimation of the return period of an observed rainfall event or conversely of the rainfall amount corresponding to a given return period for different aggregation times. There is a high need for IDF-curves in the tropical region of Central Africa but unfortunately the adequate long-term data sets are frequently not available. The present paper assesses IDF-curves for precipitation for three stations in Central Africa. More physically based models for the IDF-curves are proposed. The methodology used here has been advanced by Koutsoyiannis et al. (1998) and an inter-station and inter-technique comparison is being carried out. The IDF-curves for tropical Central Africa are an interesting tool to be used in sewer system design to combat the frequently occurring inundations in semi-urbanized and urbanized areas of the Kinshasa megapolis.

  19. The learning curves in living donor hemiliver graft procurement using small upper midline incision.

    PubMed

    Ikegami, Toru; Harimoto, Norifumi; Shimokawa, Masahiro; Yoshizumi, Tomoharu; Uchiyama, Hideaki; Itoh, Shinji; Okabe, Norihisa; Sakata, Kazuhito; Nagatsu, Akihisa; Soejima, Yuji; Maehara, Yoshihiko

    2016-12-01

    The learning curve for performing living donor hemiliver procurement (LDHP) via small upper midline incision (UMI) has not been determined. Living donors (n=101) who underwent LDHP via UMI were included to investigate the learning curve using cumulative sum analysis. The cumulative sum analysis showed that nine cases for right lobe (case #23) and 19 cases for left lobe (case #32 in the whole series) are needed for stable and acceptable surgical outcomes in LDHP via UMI. The established phase (n=69, since case #33) had a significantly shorter operative time, a smaller incision size, and less blood loss than the previous learning phase (n=32, serial case number up to the last 19th left lobe case). Multivariate analysis showed that the learning phase, high body mass index ≥25 kg/m 2 , and left lobe graft procurement are the factors associated with surgical events including operative blood loss ≥400 mL, operative time ≥300 minutes, or surgical complications ≥Clavien-Dindo grade II. There is an obvious learning curve in performing LDHP via UMI, and 32 cases including both 19 cases for left lobe and nine cases for right lobe are needed for having stable and acceptable surgical outcomes. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. Age and Acceptance of Euthanasia.

    ERIC Educational Resources Information Center

    Ward, Russell A.

    1980-01-01

    Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

  1. Defining the learning curve in laparoscopic paraesophageal hernia repair: a CUSUM analysis.

    PubMed

    Okrainec, Allan; Ferri, Lorenzo E; Feldman, Liane S; Fried, Gerald M

    2011-04-01

    There are numerous reports in the literature documenting high recurrence rates after laparoscopic paraesophageal hernia repair. The purpose of this study was to determine the learning curve for this procedure using the Cumulative Summation (CUSUM) technique. Forty-six consecutive patients with paraesophageal hernia were evaluated prospectively after laparoscopic paraesophageal hernia repair. Upper GI series was performed 3 months postoperatively to look for recurrence. Patients were stratified based on the surgeon's early (first 20 cases) and late experience (>20 cases). The CUSUM method was then used to further analyze the learning curve. Nine patients (21%) had anatomic recurrence. There was a trend toward a higher recurrence rate during the first 20 cases, although this did not achieve statistical significance (33% vs. 13%, p = 0.10). However, using a CUSUM analysis to plot the learning curve, we found that the recurrence rate diminishes after 18 cases and reaches an acceptable rate after 26 cases. Surgeon experience is an important predictor of recurrence after laparoscopic paraesophageal hernia repair. CUSUM analysis revealed there is a significant learning curve to become proficient at this procedure, with approximately 20 cases required before a consistent decrease in hernia recurrence rate is observed.

  2. The acceptance of virtual reality devices for cognitive rehabilitation: a report of positive results with schizophrenia.

    PubMed

    da Costa, Rosa Maria Esteves Moreira; de Carvalho, Luís Alfredo Vidal

    2004-03-01

    This study presents a process of virtual environment development supported by a cognitive model that is specific to cognitive deficits of diverse disorders or traumatic brain injury, and evaluates the acceptance of computer devices by a group of schizophrenic patients. The subjects that participated in this experiment accepted to work with computers and immersive glasses and demonstrated a high level of interest in the proposed tasks. No problems of illness have been observed. This experiment indicated that further research projects must be carried out to verify the value of virtual reality technology for cognitive rehabilitation of psychiatric patients. The results of the current study represent a small but necessary step in the realization of that potential.

  3. Visualizing curved spacetime

    NASA Astrophysics Data System (ADS)

    Jonsson, Rickard M.

    2005-03-01

    I present a way to visualize the concept of curved spacetime. The result is a curved surface with local coordinate systems (Minkowski systems) living on it, giving the local directions of space and time. Relative to these systems, special relativity holds. The method can be used to visualize gravitational time dilation, the horizon of black holes, and cosmological models. The idea underlying the illustrations is first to specify a field of timelike four-velocities uμ. Then, at every point, one performs a coordinate transformation to a local Minkowski system comoving with the given four-velocity. In the local system, the sign of the spatial part of the metric is flipped to create a new metric of Euclidean signature. The new positive definite metric, called the absolute metric, can be covariantly related to the original Lorentzian metric. For the special case of a two-dimensional original metric, the absolute metric may be embedded in three-dimensional Euclidean space as a curved surface.

  4. Construction and evaluation of thoracic injury risk curves for a finite element human body model in frontal car crashes.

    PubMed

    Mendoza-Vazquez, Manuel; Davidsson, Johan; Brolin, Karin

    2015-12-01

    There is a need to improve the protection to the thorax of occupants in frontal car crashes. Finite element human body models are a more detailed representation of humans than anthropomorphic test devices (ATDs). On the other hand, there is no clear consensus on the injury criteria and the thresholds to use with finite element human body models to predict rib fractures. The objective of this study was to establish a set of injury risk curves to predict rib fractures using a modified Total HUman Model for Safety (THUMS). Injury criteria at the global, structural and material levels were computed with a modified THUMS in matched Post Mortem Human Subjects (PMHSs) tests. Finally, the quality of each injury risk curve was determined. For the included PMHS tests and the modified THUMS, DcTHOR and shear stress were the criteria at the global and material levels that reached an acceptable quality. The injury risk curves at the structural level did not reach an acceptable quality. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Evaluation of the learning curve for external cephalic version using cumulative sum analysis

    PubMed Central

    Kim, So Yun; Chang, Eun Hye; Kwak, Dong Wook; Ahn, Hyun Kyung; Ryu, Hyun Mi; Kim, Moon Young

    2017-01-01

    Objective We evaluated the learning curve for external cephalic version (ECV) using learning curve-cumulative sum (LC-CUSUM) analysis. Methods This was a retrospective study involving 290 consecutive cases between October 2013 and March 2017. We evaluated the learning curve for ECV on nulli and over para 1 group using LC-CUSUM analysis on the assumption that 50% and 70% of ECV procedures succeeded by description a trend-line of quadratic function with reliable R2 values. Results The overall success rate for ECV was 64.8% (188/290), while the success rate for nullipara and over para 1 groups was 56.2% (100/178) and 78.6% (88/112), respectively. ‘H’ value, that the actual failure rate does not differ from the acceptable failure rate, was −3.27 and −1.635 when considering ECV success rates of 50% and 70%, respectively. Consequently, in order to obtain a consistent 50% success rate, we would require 57 nullipara cases, and in order to obtain a consistent 70% success rate, we would require 130 nullipara cases. In contrast, 8 to 10 over para 1 cases would be required for an expected success rate of 50% and 70% on over para 1 group. Conclusion Even a relatively inexperienced physician can experience success with multipara and after accumulating experience, they will manage nullipara cases. Further research is required for LC-CUSUM involving several practitioners instead of a single practitioner. This will lead to the gradual implementation of standard learning curve guidelines for ECV. PMID:28791265

  6. Discrete Jordan curve theorem

    NASA Astrophysics Data System (ADS)

    Chen, Li

    1999-09-01

    According to a general definition of discrete curves, surfaces, and manifolds (Li Chen, 'Generalized discrete object tracking algorithms and implementations, ' In Melter, Wu, and Latecki ed, Vision Geometry VI, SPIE Vol. 3168, pp 184 - 195, 1997.). This paper focuses on the Jordan curve theorem in 2D discrete spaces. The Jordan curve theorem says that a (simply) closed curve separates a simply connected surface into two components. Based on the definition of discrete surfaces, we give three reasonable definitions of simply connected spaces. Theoretically, these three definition shall be equivalent. We have proved the Jordan curve theorem under the third definition of simply connected spaces. The Jordan theorem shows the relationship among an object, its boundary, and its outside area. In continuous space, the boundary of an mD manifold is an (m - 1)D manifold. The similar result does apply to regular discrete manifolds. The concept of a new regular nD-cell is developed based on the regular surface point in 2D, and well-composed objects in 2D and 3D given by Latecki (L. Latecki, '3D well-composed pictures,' In Melter, Wu, and Latecki ed, Vision Geometry IV, SPIE Vol 2573, pp 196 - 203, 1995.).

  7. Learning curves in health care.

    PubMed

    Waldman, J Deane; Yourstone, Steven A; Smith, Howard L

    2003-01-01

    This article explores the uses of learning curve theory in medicine. Though effective application of learning curve theory in health care can result in higher quality and lower cost, it is seldom methodically applied in clinical practice. Fundamental changes are necessary in the corporate culture of medicine in order to capitalize maximally on the benefits of learning.

  8. On the analysis of Canadian Holstein dairy cow lactation curves using standard growth functions.

    PubMed

    López, S; France, J; Odongo, N E; McBride, R A; Kebreab, E; AlZahal, O; McBride, B W; Dijkstra, J

    2015-04-01

    Six classical growth functions (monomolecular, Schumacher, Gompertz, logistic, Richards, and Morgan) were fitted to individual and average (by parity) cumulative milk production curves of Canadian Holstein dairy cows. The data analyzed consisted of approximately 91,000 daily milk yield records corresponding to 122 first, 99 second, and 92 third parity individual lactation curves. The functions were fitted using nonlinear regression procedures, and their performance was assessed using goodness-of-fit statistics (coefficient of determination, residual mean squares, Akaike information criterion, and the correlation and concordance coefficients between observed and adjusted milk yields at several days in milk). Overall, all the growth functions evaluated showed an acceptable fit to the cumulative milk production curves, with the Richards equation ranking first (smallest Akaike information criterion) followed by the Morgan equation. Differences among the functions in their goodness-of-fit were enlarged when fitted to average curves by parity, where the sigmoidal functions with a variable point of inflection (Richards and Morgan) outperformed the other 4 equations. All the functions provided satisfactory predictions of milk yield (calculated from the first derivative of the functions) at different lactation stages, from early to late lactation. The Richards and Morgan equations provided the most accurate estimates of peak yield and total milk production per 305-d lactation, whereas the least accurate estimates were obtained with the logistic equation. In conclusion, classical growth functions (especially sigmoidal functions with a variable point of inflection) proved to be feasible alternatives to fit cumulative milk production curves of dairy cows, resulting in suitable statistical performance and accurate estimates of lactation traits. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  9. Adapting Shape Parameters for Cubic Bezier Curves

    NASA Technical Reports Server (NTRS)

    Isacoff, D.; Bailey, M. J.

    1985-01-01

    Bezier curves are an established tool in Computer Aided Geometric Design. One of the drawbacks of the Bezier method is that the curves often bear little resemblance to their control polygons. As a result, it becomes increasingly difficult to obtain anything but a rough outline of the desired shape. One possible solution is tomanipulate the curve itself instead of the control polygon. The standard cubic Bezier curve form has introduced into it two shape parameters, gamma 1 and 2. These parameters give the user the ability to manipulate the curve while the control polygon retains its original form, thereby providing a more intuitive feel for the necessary changes to the curve in order to achieve the desired shape.

  10. Estimating the Area Under ROC Curve When the Fitted Binormal Curves Demonstrate Improper Shape.

    PubMed

    Bandos, Andriy I; Guo, Ben; Gur, David

    2017-02-01

    The "binormal" model is the most frequently used tool for parametric receiver operating characteristic (ROC) analysis. The binormal ROC curves can have "improper" (non-concave) shapes that are unrealistic in many practical applications, and several tools (eg, PROPROC) have been developed to address this problem. However, due to the general robustness of binormal ROCs, the improperness of the fitted curves might carry little consequence for inferences about global summary indices, such as the area under the ROC curve (AUC). In this work, we investigate the effect of severe improperness of fitted binormal ROC curves on the reliability of AUC estimates when the data arise from an actually proper curve. We designed theoretically proper ROC scenarios that induce severely improper shape of fitted binormal curves in the presence of well-distributed empirical ROC points. The binormal curves were fitted using maximum likelihood approach. Using simulations, we estimated the frequency of severely improper fitted curves, bias of the estimated AUC, and coverage of 95% confidence intervals (CIs). In Appendix S1, we provide additional information on percentiles of the distribution of AUC estimates and bias when estimating partial AUCs. We also compared the results to a reference standard provided by empirical estimates obtained from continuous data. We observed up to 96% of severely improper curves depending on the scenario in question. The bias in the binormal AUC estimates was very small and the coverage of the CIs was close to nominal, whereas the estimates of partial AUC were biased upward in the high specificity range and downward in the low specificity range. Compared to a non-parametric approach, the binormal model led to slightly more variable AUC estimates, but at the same time to CIs with more appropriate coverage. The improper shape of the fitted binormal curve, by itself, ie, in the presence of a sufficient number of well-distributed points, does not imply

  11. User Acceptance of Wrist-Worn Activity Trackers Among Community-Dwelling Older Adults: Mixed Method Study

    PubMed Central

    Puri, Arjun; Kim, Ben; Nguyen, Olivier; Stolee, Paul; Tung, James

    2017-01-01

    Background Wearable activity trackers are newly emerging technologies with the anticipation for successfully supporting aging-in-place. Consumer-grade wearable activity trackers are increasingly ubiquitous in the market, but the attitudes toward, as well as acceptance and voluntary use of, these trackers in older population are poorly understood. Objective The aim of this study was to assess acceptance and usage of wearable activity trackers in Canadian community-dwelling older adults, using the potentially influential factors as identified in literature and technology acceptance model. Methods A mixed methods design was used. A total of 20 older adults aged 55 years and older were recruited from Southwestern Ontario. Participants used 2 different wearable activity trackers (Xiaomi Mi Band and Microsoft Band) separately for each segment in the crossover design study for 21 days (ie, 42 days total). A questionnaire was developed to capture acceptance and experience at the end of each segment, representing 2 different devices. Semistructured interviews were conducted with 4 participants, and a content analysis was performed. Results Participants ranged in age from 55 years to 84 years (mean age: 64 years). The Mi Band gained higher levels of acceptance (16/20, 80%) compared with the Microsoft Band (10/20, 50%). The equipment characteristics dimension scored significantly higher for the Mi Band (P<.05). The amount a participant was willing to pay for the device was highly associated with technology acceptance (P<.05). Multivariate logistic regression with 3 covariates resulted in an area under the curve of 0.79. Content analysis resulted in the formation of the following main themes: (1) smartphones as facilitators of wearable activity trackers; (2) privacy is less of a concern for wearable activity trackers, (3) value proposition: self-awareness and motivation; (4) subjective norm, social support, and sense of independence; and (5) equipment characteristics matter

  12. Surface family with a common involute asymptotic curve

    NASA Astrophysics Data System (ADS)

    Bayram, Ergi˙n; Bi˙li˙ci˙, Mustafa

    2016-03-01

    We construct a surface family possessing an involute of a given curve as an asymptotic curve. We express necessary and sufficient conditions for that curve with the above property. We also present natural results for such ruled surfaces. Finally, we illustrate the method with some examples, e.g. circles and helices as given curves.

  13. Chinese Nurses' Acceptance of PDA: A Cross-Sectional Survey Using a Technology Acceptance Model.

    PubMed

    Wang, Yanling; Xiao, Qian; Sun, Liu; Wu, Ying

    2016-01-01

    This study explores Chinese nurses' acceptance of PDA, using a questionnaire based on the framework of Technology Acceptance Model (TAM). 357 nurses were involved in the study. The results reveal the scores of the nurses' acceptance of PDA were means 3.18~3.36 in four dimensions. The younger of nurses, the higher nurses' title, the longer previous usage time, the more experienced using PDA, and the more acceptance of PDA. Therefore, the hospital administrators may change strategies to enhance nurses' acceptance of PDA, and promote the wide application of PDA.

  14. Development and Validation of the Controller Acceptance Rating Scale (CARS): Results of Empirical Research

    NASA Technical Reports Server (NTRS)

    Lee, Katharine K.; Kerns, Karol; Bone, Randall

    2001-01-01

    The measurement of operational acceptability is important for the development, implementation, and evolution of air traffic management decision support tools. The Controller Acceptance Rating Scale was developed at NASA Ames Research Center for the development and evaluation of the Passive Final Approach Spacing Tool. CARS was modeled after a well-known pilot evaluation rating instrument, the Cooper-Harper Scale, and has since been used in the evaluation of the User Request Evaluation Tool, developed by MITRE's Center for Advanced Aviation System Development. In this paper, we provide a discussion of the development of CARS and an analysis of the empirical data collected with CARS to examine construct validity. Results of intraclass correlations indicated statistically significant reliability for the CARS. From the subjective workload data that were collected in conjunction with the CARS, it appears that the expected set of workload attributes was correlated with the CARS. As expected, the analysis also showed that CARS was a sensitive indicator of the impact of decision support tools on controller operations. Suggestions for future CARS development and its improvement are also provided.

  15. Key acceptability attributes of orodispersible films.

    PubMed

    Scarpa, Mariagiovanna; Paudel, Amrit; Kloprogge, Frank; Hsiao, Wen Kai; Bresciani, Massimo; Gaisford, Simon; Orlu, Mine

    2018-04-01

    The features rendering orodispersible films (ODFs) patient-centric formulations are widely discussed in the scientific literature. However there is a lack of research studies exploring ODF characteristics with a potential impact on end-user acceptability. The aim of this study was to identify the key ODF characteristics affecting end-user acceptability by developing in vitro test methods for the prediction of ODFs acceptability and correlate these formulation characteristics with the data obtained from a human panel study. Four drug-free single-polymer films were prepared by solvent casting. Solutions of poly(vinyl) alcohol (PVOH) 39 KDa (P1), PVOH 197 KDa (P2), carboxymethylcellulose (CMC) 395 KDa (C1), and CMC 725 KDa (C2) were prepared. Texture analysis and Dynamic Mechanical Analysis (DMA) were used to assess film tack. Petri dish and drop methods were used to assess disintegration time. A human panel of 24 healthy young adults was employed to identify end-user acceptability criteria of the four study film samples. Texture analysis data of ODF tack were not found to be in agreement with the in vivo perceived stickiness in the mouth. However, measurement of the area under the adhesive force curve obtained by DMA correlated with in vivo perceived stickiness data for all samples. The disintegration times obtained by drop method were more comparable to human panel data than the petri dish method. Hence DMA and drop methods proved to be promising methodologies for the prediction of the end-user acceptability. The type and molecular weight of the film-forming polymer had a strong influence on stickiness perception, whereas only polymeric molecular weight influenced perceived disintegration time. The human panel study showed that Participant Reported Outcomes (PROs) for the perceived stickiness in the mouth and disintegration time of test films received significantly different scores between samples, and thus were identified as the key attributes with the

  16. A direct method to solve optimal knots of B-spline curves: An application for non-uniform B-spline curves fitting.

    PubMed

    Dung, Van Than; Tjahjowidodo, Tegoeh

    2017-01-01

    B-spline functions are widely used in many industrial applications such as computer graphic representations, computer aided design, computer aided manufacturing, computer numerical control, etc. Recently, there exist some demands, e.g. in reverse engineering (RE) area, to employ B-spline curves for non-trivial cases that include curves with discontinuous points, cusps or turning points from the sampled data. The most challenging task in these cases is in the identification of the number of knots and their respective locations in non-uniform space in the most efficient computational cost. This paper presents a new strategy for fitting any forms of curve by B-spline functions via local algorithm. A new two-step method for fast knot calculation is proposed. In the first step, the data is split using a bisecting method with predetermined allowable error to obtain coarse knots. Secondly, the knots are optimized, for both locations and continuity levels, by employing a non-linear least squares technique. The B-spline function is, therefore, obtained by solving the ordinary least squares problem. The performance of the proposed method is validated by using various numerical experimental data, with and without simulated noise, which were generated by a B-spline function and deterministic parametric functions. This paper also discusses the benchmarking of the proposed method to the existing methods in literature. The proposed method is shown to be able to reconstruct B-spline functions from sampled data within acceptable tolerance. It is also shown that, the proposed method can be applied for fitting any types of curves ranging from smooth ones to discontinuous ones. In addition, the method does not require excessive computational cost, which allows it to be used in automatic reverse engineering applications.

  17. Adolescent Idiopathic Scoliosis Surgery by a Neurosurgeon: Learning Curve for Neurosurgeons.

    PubMed

    Hyun, Seung-Jae; Han, Sanghyun; Kim, Ki-Jeong; Jahng, Tae-Ahn; Kim, Yongjung J; Rhim, Seung-Chul; Kim, Hyun-Jib

    2018-02-01

    To determine a neurosurgeon's learning curve of surgical treatment for adolescent idiopathic scoliosis (AIS) patients. This study is a retrospective analysis. Forty-six patients were treated by a single neurosurgeon between 2011 and 2017 using posterior segmental instrumentation and fusion. According to the time period, the former and latter 23 patients were divided into group 1 and group 2, respectively. Patients' demographic data, curve magnitude, number of levels treated, amount of correction achieved, radiographic/clinical outcomes, and complications were compared between the groups. The majority were females (34 vs. 12) with average ages of 15.0 versus 15.6, respectively. The mean follow-up period was 24.6 months. The average number of fusion levels was similar with 10.3 and 11.5 vertebral bodies in groups 1 and 2, respectively. The average Cobb angle of major curvature was 59.8° and 58.5° in groups 1 and 2, respectively. There observed significant reductions of operative time (324.4 vs. 224.7 minutes, P = 0.007) and estimated blood loss (648.3 vs. 438.0 mL, P = 0.027) in group 2. The correction rate of the major structural curve was greater in group 2 (70.7% vs. 81.0%, P = 0.001). There was no case of neurologic deficit, infection, and revision for screw malposition. One patient of group 1 underwent fusion extension surgery for shoulder asymmetry. Radiographic and clinical outcomes of AIS patients treated by a neurosurgeon were acceptable. AIS surgery may be performed with an acceptable rate of complications after about 20 surgeries. With acquisition of surgical experiences, neurosurgeons could perform deformity surgery for AIS effectively and safely. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. Qualis-SIS: automated standard curve generation and quality assessment for multiplexed targeted quantitative proteomic experiments with labeled standards.

    PubMed

    Mohammed, Yassene; Percy, Andrew J; Chambers, Andrew G; Borchers, Christoph H

    2015-02-06

    Multiplexed targeted quantitative proteomics typically utilizes multiple reaction monitoring and allows the optimized quantification of a large number of proteins. One challenge, however, is the large amount of data that needs to be reviewed, analyzed, and interpreted. Different vendors provide software for their instruments, which determine the recorded responses of the heavy and endogenous peptides and perform the response-curve integration. Bringing multiplexed data together and generating standard curves is often an off-line step accomplished, for example, with spreadsheet software. This can be laborious, as it requires determining the concentration levels that meet the required accuracy and precision criteria in an iterative process. We present here a computer program, Qualis-SIS, that generates standard curves from multiplexed MRM experiments and determines analyte concentrations in biological samples. Multiple level-removal algorithms and acceptance criteria for concentration levels are implemented. When used to apply the standard curve to new samples, the software flags each measurement according to its quality. From the user's perspective, the data processing is instantaneous due to the reactivity paradigm used, and the user can download the results of the stepwise calculations for further processing, if necessary. This allows for more consistent data analysis and can dramatically accelerate the downstream data analysis.

  19. Comparison of power curve monitoring methods

    NASA Astrophysics Data System (ADS)

    Cambron, Philippe; Masson, Christian; Tahan, Antoine; Torres, David; Pelletier, Francis

    2017-11-01

    Performance monitoring is an important aspect of operating wind farms. This can be done through the power curve monitoring (PCM) of wind turbines (WT). In the past years, important work has been conducted on PCM. Various methodologies have been proposed, each one with interesting results. However, it is difficult to compare these methods because they have been developed using their respective data sets. The objective of this actual work is to compare some of the proposed PCM methods using common data sets. The metric used to compare the PCM methods is the time needed to detect a change in the power curve. Two power curve models will be covered to establish the effect the model type has on the monitoring outcomes. Each model was tested with two control charts. Other methodologies and metrics proposed in the literature for power curve monitoring such as areas under the power curve and the use of statistical copulas have also been covered. Results demonstrate that model-based PCM methods are more reliable at the detecting a performance change than other methodologies and that the effectiveness of the control chart depends on the types of shift observed.

  20. Depressive Symptoms Anticipate Changes in the Frequency of Alcohol Intoxication Among Low-Accepted Adolescents

    PubMed Central

    Richmond, Ashley D.; Laursen, Brett; Kerr, Margaret; Stattin, Håkan

    2015-01-01

    Objective: There is strong evidence that depression anticipates later drinking problems among adults. These associations have not been consistently documented during adolescence, perhaps because little attention has been given to individual differences in peer relationships, which are the primary setting for adolescent alcohol consumption. This study investigated associations between depressive affect and alcohol misuse as moderated by peer group acceptance. Method: A community sample of 1,048 Swedish youth provided self-reports of depressive symptoms and intoxication frequency at annual intervals across the middle school years (seventh grade: M = 13.21 years old; eighth grade: M = 14.27 years old; ninth grade: M = 15.26 years old). Peer nominations provided a measure of individual acceptance. Results: Growth curve analyses revealed differences in the extent to which initial levels of depressive symptoms predicted the slope of increase in intoxication frequency. Higher levels of depressive symptoms at the outset anticipated sharp increases in intoxication frequency from seventh to ninth grades for low-accepted youth but not for average- or high-accepted youth. Conclusions: poor peer relations and depressive affect are vulnerabilities that set the stage for escalating adolescent alcohol misuse. Across the middle school years, when most youth have their first experiences with alcohol, peer difficulties exacerbated the tendency of depressed youth to drink to excess. PMID:26098034

  1. Acceptance-Based versus Standard Behavioral Treatment for Obesity: Results from the Mind Your Health Randomized Controlled Trial

    PubMed Central

    Forman, Evan M.; Butryn, Meghan L.; Manasse, Stephanie M.; Crosby, Ross D.; Goldstein, Stephanie P.; Wyckoff, Emily P.; Thomas, J. Graham

    2016-01-01

    Objective To evaluate the efficacy, as well as potential moderators and mediators, of a revised acceptance-based behavioral treatment (ABT) for obesity, relative to standard behavioral treatment (SBT). Design and Methods Participants with overweight and obesity (n=190) were randomized to 25 sessions of ABT or SBT over 1 year. Primary outcome (weight), mediator and moderator measurements were taken at baseline, 6 months and/or 12 months, and weight was also measured every session. Results Participants assigned to ABT attained a significantly greater 12-month weight loss (13.3% ± 0.83) than did those assigned to SBT (9.8% ± 0.87; p=.005). A condition by quadratic time effect on session-by-session weights (p=.01) indicated that SBT had a shallower trajectory of weight loss followed by an upward deflection. ABT participants were also more likely to maintain a 10% weight loss at 12 months (64.0% vs 48.9%; p=.04). No evidence of moderation was found. Results supported the mediating role of autonomous motivation and psychological acceptance of food-related urges. Conclusion Behavioral weight loss outcomes can be improved by integrating self-regulation skills that are reflected in acceptance-based treatment, i.e., tolerating discomfort and reduction in pleasure, enacting commitment to valued behavior, and being mindfully aware during moments of decision making. PMID:27670400

  2. The roles of the binodal curve and the spinodal curve in expansions from the supercritical state with flashing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Knuth, Eldon L.; Miller, David R.; Even, Uzi

    2014-12-09

    to be metastable from the binodal curve to the spinodal curve. TOF distributions with more than two peaks (interpreted earlier as superimposed alternating-state TOF distributions) indicated flashing of the metastable flow downstream from the binodal curve but upstream from the sonic point. This relatively early flashing is due apparently to destabilizing interactions with the walls of the source. If the expansion crosses the binodal curve downstream from the nozzle, the metastable fluid does not interact with surfaces and flashing might be delayed until the expansion reaches the spinodal curve. It is concluded that, if the expansion crosses the binodal curve before reaching the sonic point, the resulting metastable fluid downstream from the binodal curve interacts with the adjacent surfaces and flashes into liquid and vapor phases which expand alternately through the nozzle; the two associated alternating TOF distributions are superposed by the chopping process so that the result has the appearance of a single distribution with three peaks.« less

  3. Creative Tiling: A Story of 1000-and-1 Curves

    ERIC Educational Resources Information Center

    Al-Darwish, Nasir

    2012-01-01

    We describe a procedure that utilizes symmetric curves for building artistic tiles. One particular curve was found to mesh nicely with hundreds other curves, resulting in eye-catching tiling designs. The results of our work serve as a good example of using ideas from 2-D graphics and algorithms in a practical web-based application.

  4. Stenting for curved lesions using a novel curved balloon: Preliminary experimental study.

    PubMed

    Tomita, Hideshi; Higaki, Takashi; Kobayashi, Toshiki; Fujii, Takanari; Fujimoto, Kazuto

    2015-08-01

    Stenting may be a compelling approach to dilating curved lesions in congenital heart diseases. However, balloon-expandable stents, which are commonly used for congenital heart diseases, are usually deployed in a straight orientation. In this study, we evaluated the effect of stenting with a novel curved balloon considered to provide better conformability to the curved-angled lesion. In vitro experiments: A Palmaz Genesis(®) stent (Johnson & Johnson, Cordis Co, Bridgewater, NJ, USA) mounted on the Goku(®) curve (Tokai Medical Co. Nagoya, Japan) was dilated in vitro to observe directly the behavior of the stent and balloon assembly during expansion. Animal experiment: A short Express(®) Vascular SD (Boston Scientific Co, Marlborough, MA, USA) stent and a long Express(®) Vascular LD stent (Boston Scientific) mounted on the curved balloon were deployed in the curved vessel of a pig to observe the effect of stenting in vivo. In vitro experiments: Although the stent was dilated in a curved fashion, stent and balloon assembly also rotated conjointly during expansion of its curved portion. In the primary stenting of the short stent, the stent was dilated with rotation of the curved portion. The excised stent conformed to the curved vessel. As the long stent could not be negotiated across the mid-portion with the balloon in expansion when it started curving, the mid-portion of the stent failed to expand fully. Furthermore, the balloon, which became entangled with the stent strut, could not be retrieved even after complete deflation. This novel curved balloon catheter might be used for implantation of the short stent in a curved lesion; however, it should not be used for primary stenting of the long stent. Post-dilation to conform the stent to the angled vessel would be safer than primary stenting irrespective of stent length. Copyright © 2014 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

  5. Treatment acceptability among mexican american parents.

    PubMed

    Borrego, Joaquin; Ibanez, Elizabeth S; Spendlove, Stuart J; Pemberton, Joy R

    2007-09-01

    There is a void in the literature with regard to Hispanic parents' views about common interventions for children with behavior problems. The purpose of this study was to examine the treatment acceptability of child management techniques in a Mexican American sample. Parents' acculturation was also examined to determine if it would account for differences in treatment acceptability. Mexican American parents found response cost, a punishment-based technique, more acceptable than positive reinforcement-based techniques (e.g., differential attention). Results suggest that Mexican American parents' acculturation has little impact on acceptability of child management interventions. No association was found between mothers' acculturation and treatment acceptability. However, more acculturated Mexican American fathers viewed token economy as more acceptable than less acculturated fathers. Results are discussed in the context of clinical work and research with Mexican Americans.

  6. Plutonium Critical Mass Curve Comparison to Mass at Upper Subcritical Limit (USL) Using Whisper

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alwin, Jennifer Louise; Zhang, Ning

    Whisper is computational software designed to assist the nuclear criticality safety analyst with validation studies with the MCNP ® Monte Carlo radiation transport package. Standard approaches to validation rely on the selection of benchmarks based upon expert judgment. Whisper uses sensitivity/uncertainty (S/U) methods to select relevant benchmarks to a particular application or set of applications being analyzed. Using these benchmarks, Whisper computes a calculational margin. Whisper attempts to quantify the margin of subcriticality (MOS) from errors in software and uncertainties in nuclear data. The combination of the Whisper-derived calculational margin and MOS comprise the baseline upper subcritical limit (USL), tomore » which an additional margin may be applied by the nuclear criticality safety analyst as appropriate to ensure subcriticality. A series of critical mass curves for plutonium, similar to those found in Figure 31 of LA-10860-MS, have been generated using MCNP6.1.1 and the iterative parameter study software, WORM_Solver. The baseline USL for each of the data points of the curves was then computed using Whisper 1.1. The USL was then used to determine the equivalent mass for plutonium metal-water system. ANSI/ANS-8.1 states that it is acceptable to use handbook data, such as the data directly from the LA-10860-MS, as it is already considered validated (Section 4.3 4) “Use of subcritical limit data provided in ANSI/ANS standards or accepted reference publications does not require further validation.”). This paper attempts to take a novel approach to visualize traditional critical mass curves and allows comparison with the amount of mass for which the k eff is equal to the USL (calculational margin + margin of subcriticality). However, the intent is to plot the critical mass data along with USL, not to suggest that already accepted handbook data should have new and more rigorous requirements for validation.« less

  7. Using the weighted area under the net benefit curve for decision curve analysis.

    PubMed

    Talluri, Rajesh; Shete, Sanjay

    2016-07-18

    Risk prediction models have been proposed for various diseases and are being improved as new predictors are identified. A major challenge is to determine whether the newly discovered predictors improve risk prediction. Decision curve analysis has been proposed as an alternative to the area under the curve and net reclassification index to evaluate the performance of prediction models in clinical scenarios. The decision curve computed using the net benefit can evaluate the predictive performance of risk models at a given or range of threshold probabilities. However, when the decision curves for 2 competing models cross in the range of interest, it is difficult to identify the best model as there is no readily available summary measure for evaluating the predictive performance. The key deterrent for using simple measures such as the area under the net benefit curve is the assumption that the threshold probabilities are uniformly distributed among patients. We propose a novel measure for performing decision curve analysis. The approach estimates the distribution of threshold probabilities without the need of additional data. Using the estimated distribution of threshold probabilities, the weighted area under the net benefit curve serves as the summary measure to compare risk prediction models in a range of interest. We compared 3 different approaches, the standard method, the area under the net benefit curve, and the weighted area under the net benefit curve. Type 1 error and power comparisons demonstrate that the weighted area under the net benefit curve has higher power compared to the other methods. Several simulation studies are presented to demonstrate the improvement in model comparison using the weighted area under the net benefit curve compared to the standard method. The proposed measure improves decision curve analysis by using the weighted area under the curve and thereby improves the power of the decision curve analysis to compare risk prediction models in

  8. Construction of estimated flow- and load-duration curves for Kentucky using the Water Availability Tool for Environmental Resources (WATER)

    USGS Publications Warehouse

    Unthank, Michael D.; Newson, Jeremy K.; Williamson, Tanja N.; Nelson, Hugh L.

    2012-01-01

    Flow- and load-duration curves were constructed from the model outputs of the U.S. Geological Survey's Water Availability Tool for Environmental Resources (WATER) application for streams in Kentucky. The WATER application was designed to access multiple geospatial datasets to generate more than 60 years of statistically based streamflow data for Kentucky. The WATER application enables a user to graphically select a site on a stream and generate an estimated hydrograph and flow-duration curve for the watershed upstream of that point. The flow-duration curves are constructed by calculating the exceedance probability of the modeled daily streamflows. User-defined water-quality criteria and (or) sampling results can be loaded into the WATER application to construct load-duration curves that are based on the modeled streamflow results. Estimates of flow and streamflow statistics were derived from TOPographically Based Hydrological MODEL (TOPMODEL) simulations in the WATER application. A modified TOPMODEL code, SDP-TOPMODEL (Sinkhole Drainage Process-TOPMODEL) was used to simulate daily mean discharges over the period of record for 5 karst and 5 non-karst watersheds in Kentucky in order to verify the calibrated model. A statistical evaluation of the model's verification simulations show that calibration criteria, established by previous WATER application reports, were met thus insuring the model's ability to provide acceptably accurate estimates of discharge at gaged and ungaged sites throughout Kentucky. Flow-duration curves are constructed in the WATER application by calculating the exceedence probability of the modeled daily flow values. The flow-duration intervals are expressed as a percentage, with zero corresponding to the highest stream discharge in the streamflow record. Load-duration curves are constructed by applying the loading equation (Load = Flow*Water-quality criterion) at each flow interval.

  9. BMI curves for preterm infants.

    PubMed

    Olsen, Irene E; Lawson, M Louise; Ferguson, A Nicole; Cantrell, Rebecca; Grabich, Shannon C; Zemel, Babette S; Clark, Reese H

    2015-03-01

    Preterm infants experience disproportionate growth failure postnatally and may be large weight for length despite being small weight for age by hospital discharge. The objective of this study was to create and validate intrauterine weight-for-length growth curves using the contemporary, large, racially diverse US birth parameters sample used to create the Olsen weight-, length-, and head-circumference-for-age curves. Data from 391 681 US infants (Pediatrix Medical Group) born at 22 to 42 weeks' gestational age (born in 1998-2006) included birth weight, length, and head circumference, estimated gestational age, and gender. Separate subsamples were used to create and validate curves. Established methods were used to determine the weight-for-length ratio that was most highly correlated with weight and uncorrelated with length. Final smoothed percentile curves (3rd to 97th) were created by the Lambda Mu Sigma (LMS) method. The validation sample was used to confirm results. The final sample included 254 454 singleton infants (57.2% male) who survived to discharge. BMI was the best overall weight-for-length ratio for both genders and a majority of gestational ages. Gender-specific BMI-for-age curves were created (n = 127 446) and successfully validated (n = 126 988). Mean z scores for the validation sample were ∼0 (∼1 SD). BMI was different across gender and gestational age. We provide a set of validated reference curves (gender-specific) to track changes in BMI for prematurely born infants cared for in the NICU for use with weight-, length-, and head-circumference-for-age intrauterine growth curves. Copyright © 2015 by the American Academy of Pediatrics.

  10. Exploring user experience and technology acceptance for a fall prevention system: results from a randomized clinical trial and a living lab.

    PubMed

    Vaziri, Daryoush D; Aal, Konstantin; Ogonowski, Corinna; Von Rekowski, Thomas; Kroll, Michael; Marston, Hannah R; Poveda, Rakel; Gschwind, Yves J; Delbaere, Kim; Wieching, Rainer; Wulf, Volker

    2016-01-01

    Falls are common in older adults and can result in serious injuries. Due to demographic changes, falls and related healthcare costs are likely to increase over the next years. Participation and motivation of older adults in fall prevention measures remain a challenge. The iStoppFalls project developed an information and communication technology (ICT)-based system for older adults to use at home in order to reduce common fall risk factors such as impaired balance and muscle weakness. The system aims at increasing older adults' motivation to participate in ICT-based fall prevention measures. This article reports on usability, user-experience and user-acceptance aspects affecting the use of the iStoppFalls system by older adults. In the course of a 16-week international multicenter study, 153 community-dwelling older adults aged 65+ participated in the iStoppFalls randomized controlled trial, of which half used the system in their home to exercise and assess their risk of falling. During the study, 60 participants completed questionnaires regarding the usability, user experience and user acceptance of the iStoppFalls system. Usability was measured with the System Usability Scale (SUS). For user experience the Physical Activity Enjoyment Scale (PACES) was applied. User acceptance was assessed with the Dynamic Acceptance Model for the Re-evaluation of Technologies (DART). To collect more detailed data on usability, user experience and user acceptance, additional qualitative interviews and observations were conducted with participants. Participants evaluated the usability of the system with an overall score of 62 (Standard Deviation, SD 15.58) out of 100, which suggests good usability. Most users enjoyed the iStoppFalls games and assessments, as shown by the overall PACES score of 31 (SD 8.03). With a score of 0.87 (SD 0.26), user acceptance results showed that participants accepted the iStoppFalls system for use in their own home. Interview data suggested that certain

  11. Preliminary results with microchannel array plates employing curved microchannels to inhibit ion feedback. [for photon counters

    NASA Technical Reports Server (NTRS)

    Timothy, J. G.; Bybee, R. L.

    1977-01-01

    Up to now, microchannel array plates (MCPs) have been constructed with microchannels having a straight geometry and hence have been prone to ion-feedback instabilities at high operating potentials and high ambient pressures. This paper describes the performances of MCPs with curved (J and C configuration) microchannels to inhibit ion feedback. Plates with curved microchannels have demonstrated performances comparable to those of conventional channel electron multipliers with saturated output pulse-height distributions and modal gain values in excess of 10 to the 6th electrons/pulse.

  12. Manual flying of curved precision approaches to landing with electromechanical instrumentation. A piloted simulation study

    NASA Technical Reports Server (NTRS)

    Knox, Charles E.

    1993-01-01

    A piloted simulation study was conducted to examine the requirements for using electromechanical flight instrumentation to provide situation information and flight guidance for manually controlled flight along curved precision approach paths to a landing. Six pilots were used as test subjects. The data from these tests indicated that flight director guidance is required for the manually controlled flight of a jet transport airplane on curved approach paths. Acceptable path tracking performance was attained with each of the three situation information algorithms tested. Approach paths with both multiple sequential turns and short final path segments were evaluated. Pilot comments indicated that all the approach paths tested could be used in normal airline operations.

  13. Acceptance of pain, self-compassion and psychopathology: using the chronic pain acceptance questionnaire to identify patients' subgroups.

    PubMed

    Costa, Joana; Pinto-Gouveia, José

    2011-01-01

    The present study explores whether specific subgroups of patients could be identified based on Chronic Pain Acceptance Questionnaire scores. A battery of self-report questionnaire was used to assess acceptance of pain, self-compassion and psychopathology in 103 participants with chronic pain, from Portuguese health care units. K-Means cluster were performed and the results supported three subgroups of patients (low acceptance subgroup; high acceptance subgroup; intermediate subgroup with activity engagement near to the mean and low willingness to pain). One-way ANOVA's showed that the three subgroups identified differed significantly from each other on psychopathology and self-compassion. Results indicated that the intermediate subgroup presented less depression and stress, compared with the low acceptance subgroup. In what concerns self-compassion, the low acceptance subgroup reported higher self-judgment, isolation and over identification, compared with the intermediate subgroup. These subgroups also differed from each other in common humanity and mindfulness. Implications and clinical utility of the results were discussed, suggesting the increase of willingness to pain as an important key in chronic pain interventions.  Copyright © 2010 John Wiley & Sons, Ltd.

  14. Learning curves in health professions education.

    PubMed

    Pusic, Martin V; Boutis, Kathy; Hatala, Rose; Cook, David A

    2015-08-01

    Learning curves, which graphically show the relationship between learning effort and achievement, are common in published education research but are not often used in day-to-day educational activities. The purpose of this article is to describe the generation and analysis of learning curves and their applicability to health professions education. The authors argue that the time is right for a closer look at using learning curves-given their desirable properties-to inform both self-directed instruction by individuals and education management by instructors.A typical learning curve is made up of a measure of learning (y-axis), a measure of effort (x-axis), and a mathematical linking function. At the individual level, learning curves make manifest a single person's progress towards competence including his/her rate of learning, the inflection point where learning becomes more effortful, and the remaining distance to mastery attainment. At the group level, overlaid learning curves show the full variation of a group of learners' paths through a given learning domain. Specifically, they make overt the difference between time-based and competency-based approaches to instruction. Additionally, instructors can use learning curve information to more accurately target educational resources to those who most require them.The learning curve approach requires a fine-grained collection of data that will not be possible in all educational settings; however, the increased use of an assessment paradigm that explicitly includes effort and its link to individual achievement could result in increased learner engagement and more effective instructional design.

  15. Evaluation of bilirubin concentration in hemolysed samples, is it really impossible? The altitude-curve cartography approach to interfered assays.

    PubMed

    Brunori, Paola; Masi, Piergiorgio; Faggiani, Luigi; Villani, Luciano; Tronchin, Michele; Galli, Claudio; Laube, Clarissa; Leoni, Antonella; Demi, Maila; La Gioia, Antonio

    2011-04-11

    Neonatal jaundice might lead to severe clinical consequences. Measurement of bilirubin in samples is interfered by hemolysis. Over a method-depending cut-off value of measured hemolysis, bilirubin value is not accepted and a new sample is required for evaluation although this is not always possible, especially with newborns and cachectic oncological patients. When usage of different methods, less prone to interferences, is not feasible an alternative recovery method for analytical significance of rejected data might help clinicians to take appropriate decisions. We studied the effects of hemolysis over total bilirubin measurement, comparing hemolysis-interfered bilirubin measurement with the non-interfered value. Interference curves were extrapolated over a wide range of bilirubin (0-30 mg/mL) and hemolysis (H Index 0-1100). Interference "altitude" curves were calculated and plotted. A bimodal acceptance table was calculated. Non-interfered bilirubin of given samples was calculated, by linear interpolation between the nearest lower and upper interference curves. Rejection of interference-sensitive data from hemolysed samples for every method should be based not upon the interferent concentration but upon a more complex algorithm based upon the concentration-dependent bimodal interaction between the interfered analyte and the measured interferent. The altitude-curve cartography approach to interfered assays may help laboratories to build up their own method-dependent algorithm and to improve the trueness of their data by choosing a cut-off value different from the one (-10% interference) proposed by manufacturers. When re-sampling or an alternative method is not available the altitude-curve cartography approach might also represent an alternative recovery method for analytical significance of rejected data. Copyright © 2011 Elsevier B.V. All rights reserved.

  16. Four-year to Eight-year Results of Vagotomy and Simple Drainage for Benign Lesser Curve Gastric Ulcer

    PubMed Central

    Burge, H.; Gill, A. Morton; Maclean, C.; Stedeford, R.

    1970-01-01

    The results of vagotomy and simple drainage for recurrent benign lesser curve gastric ulcer are recorded. Seventy-two consecutive cases were treated from 1962 to 1965. The follow-up is therefore from five to eight years. In only two cases did the ulcer fail to heal and remain healed. Four years after operation both these had persistent ulceration and persistent gastric retention. Both have apparently been cured by gastrojejunostomy done to improve gastric drainage. ImagesFIG. 1FIG. 2FIG. 3 PMID:5451588

  17. Multi-q pattern classification of polarization curves

    NASA Astrophysics Data System (ADS)

    Fabbri, Ricardo; Bastos, Ivan N.; Neto, Francisco D. Moura; Lopes, Francisco J. P.; Gonçalves, Wesley N.; Bruno, Odemir M.

    2014-02-01

    Several experimental measurements are expressed in the form of one-dimensional profiles, for which there is a scarcity of methodologies able to classify the pertinence of a given result to a specific group. The polarization curves that evaluate the corrosion kinetics of electrodes in corrosive media are applications where the behavior is chiefly analyzed from profiles. Polarization curves are indeed a classic method to determine the global kinetics of metallic electrodes, but the strong nonlinearity from different metals and alloys can overlap and the discrimination becomes a challenging problem. Moreover, even finding a typical curve from replicated tests requires subjective judgment. In this paper, we used the so-called multi-q approach based on the Tsallis statistics in a classification engine to separate the multiple polarization curve profiles of two stainless steels. We collected 48 experimental polarization curves in an aqueous chloride medium of two stainless steel types, with different resistance against localized corrosion. Multi-q pattern analysis was then carried out on a wide potential range, from cathodic up to anodic regions. An excellent classification rate was obtained, at a success rate of 90%, 80%, and 83% for low (cathodic), high (anodic), and both potential ranges, respectively, using only 2% of the original profile data. These results show the potential of the proposed approach towards efficient, robust, systematic and automatic classification of highly nonlinear profile curves.

  18. simulation of the DNA force-extension curve

    NASA Astrophysics Data System (ADS)

    Shinaberry, Gregory; Mikhaylov, Ivan; Balaeff, Alexander

    A molecular dynamics simulation study of the force-extension curve of double-stranded DNA is presented. Extended simulations of the DNA at multiple points along the force-extension curve are conducted with DNA end-to-end length constrained at each point. The calculated force-extension curve qualitatively reproduces the experimental one. The DNA conformational ensemble at each extension shows that the famous plateau of the force-extension curve results from B-DNA melting, whereas the formation of the earlier-predicted novel DNA conformation called 'zip-DNA' takes place at extensions past the plateau. An extensive analysis of the DNA conformational ensemble in terms of base configuration, backbone configuration, solvent interaction energy, etc., is conducted in order to elucidate the physical origin of DNA elasticity and the main interactions responsible for the shape of the force-extension curve.

  19. A Curve Fitting Approach Using ANN for Converting CT Number to Linear Attenuation Coefficient for CT-based PET Attenuation Correction

    NASA Astrophysics Data System (ADS)

    Lai, Chia-Lin; Lee, Jhih-Shian; Chen, Jyh-Cheng

    2015-02-01

    was used. Overall, it can be concluded that the bilinear transformation method resulted in considerable bias and the newly proposed calibration curve built by ANN could achieve better results with acceptable accuracy.

  20. Evaluation of Strain-Life Fatigue Curve Estimation Methods and Their Application to a Direct-Quenched High-Strength Steel

    NASA Astrophysics Data System (ADS)

    Dabiri, M.; Ghafouri, M.; Rohani Raftar, H. R.; Björk, T.

    2018-03-01

    Methods to estimate the strain-life curve, which were divided into three categories: simple approximations, artificial neural network-based approaches and continuum damage mechanics models, were examined, and their accuracy was assessed in strain-life evaluation of a direct-quenched high-strength steel. All the prediction methods claim to be able to perform low-cycle fatigue analysis using available or easily obtainable material properties, thus eliminating the need for costly and time-consuming fatigue tests. Simple approximations were able to estimate the strain-life curve with satisfactory accuracy using only monotonic properties. The tested neural network-based model, although yielding acceptable results for the material in question, was found to be overly sensitive to the data sets used for training and showed an inconsistency in estimation of the fatigue life and fatigue properties. The studied continuum damage-based model was able to produce a curve detecting early stages of crack initiation. This model requires more experimental data for calibration than approaches using simple approximations. As a result of the different theories underlying the analyzed methods, the different approaches have different strengths and weaknesses. However, it was found that the group of parametric equations categorized as simple approximations are the easiest for practical use, with their applicability having already been verified for a broad range of materials.

  1. User Acceptance of Wrist-Worn Activity Trackers Among Community-Dwelling Older Adults: Mixed Method Study.

    PubMed

    Puri, Arjun; Kim, Ben; Nguyen, Olivier; Stolee, Paul; Tung, James; Lee, Joon

    2017-11-15

    Wearable activity trackers are newly emerging technologies with the anticipation for successfully supporting aging-in-place. Consumer-grade wearable activity trackers are increasingly ubiquitous in the market, but the attitudes toward, as well as acceptance and voluntary use of, these trackers in older population are poorly understood. The aim of this study was to assess acceptance and usage of wearable activity trackers in Canadian community-dwelling older adults, using the potentially influential factors as identified in literature and technology acceptance model. A mixed methods design was used. A total of 20 older adults aged 55 years and older were recruited from Southwestern Ontario. Participants used 2 different wearable activity trackers (Xiaomi Mi Band and Microsoft Band) separately for each segment in the crossover design study for 21 days (ie, 42 days total). A questionnaire was developed to capture acceptance and experience at the end of each segment, representing 2 different devices. Semistructured interviews were conducted with 4 participants, and a content analysis was performed. Participants ranged in age from 55 years to 84 years (mean age: 64 years). The Mi Band gained higher levels of acceptance (16/20, 80%) compared with the Microsoft Band (10/20, 50%). The equipment characteristics dimension scored significantly higher for the Mi Band (P<.05). The amount a participant was willing to pay for the device was highly associated with technology acceptance (P<.05). Multivariate logistic regression with 3 covariates resulted in an area under the curve of 0.79. Content analysis resulted in the formation of the following main themes: (1) smartphones as facilitators of wearable activity trackers; (2) privacy is less of a concern for wearable activity trackers, (3) value proposition: self-awareness and motivation; (4) subjective norm, social support, and sense of independence; and (5) equipment characteristics matter: display, battery, comfort, and

  2. The Workload Curve: Subjective Mental Workload.

    PubMed

    Estes, Steven

    2015-11-01

    In this paper I begin looking for evidence of a subjective workload curve. Results from subjective mental workload assessments are often interpreted linearly. However, I hypothesized that ratings of subjective mental workload increase nonlinearly with unitary increases in working memory load. Two studies were conducted. In the first, the participant provided ratings of the mental difficulty of a series of digit span recall tasks. In the second study, participants provided ratings of mental difficulty associated with recall of visual patterns. The results of the second study were then examined using a mathematical model of working memory. An S curve, predicted a priori, was found in the results of both the digit span and visual pattern studies. A mathematical model showed a tight fit between workload ratings and levels of working memory activation. This effort provides good initial evidence for the existence of a workload curve. The results support further study in applied settings and other facets of workload (e.g., temporal workload). Measures of subjective workload are used across a wide variety of domains and applications. These results bear on their interpretation, particularly as they relate to workload thresholds. © 2015, Human Factors and Ergonomics Society.

  3. The influence of tinnitus acceptance on the quality of life and psychological distress in patients with chronic tinnitus

    PubMed Central

    Riedl, David; Rumpold, Gerhard; Schmidt, Annette; Zorowka, Patrick G.; Bliem, Harald R.; Moschen, Roland

    2015-01-01

    Recent findings show the importance of acceptance in the treatment of chronic tinnitus. So far, very limited research investigating the different levels of tinnitus acceptance has been conducted. The aim of this study was to investigate the quality of life (QoL) and psychological distress in patients with chronic tinnitus who reported different levels of tinnitus acceptance. The sample consisted of outpatients taking part in a tinnitus coping group (n = 97). Correlations between tinnitus acceptance, psychological distress, and QoL were calculated. Receiver operating characteristic (ROC) curves were used to calculate a cutoff score for the German “Tinnitus Acceptance Questionnaire” (CTAQ-G) and to evaluate the screening abilities of the CTAQ-G. Independent sample t-tests were conducted to compare QoL and psychological distress in patients with low tinnitus acceptance and high tinnitus acceptance. A cutoff point for CTAQ-G of 62.5 was defined, differentiating between patients with “low-to-mild tinnitus acceptance” and “moderate-to-high tinnitus acceptance.” Patients with higher levels of tinnitus acceptance reported a significantly higher QoL and lower psychological distress. Tinnitus acceptance plays an important role for patients with chronic tinnitus. Increased levels of acceptance are related to better QoL and less psychological distress. PMID:26356381

  4. Curved adjustable fibre-optic diode laser in microscopic cholesteatoma surgery: description of use and review of the relevant literature.

    PubMed

    McCaffer, C J; Pabla, L; Watson, C

    2018-04-01

    The use of lasers in cholesteatoma surgery is common and well accepted. The most commonly used laser fibres are straight and non-adjustable; these have several limitations. This paper describes the use of an alternative laser fibre. This 'How I Do It' paper describes and illustrates the use of an alternative curved adjustable fibre-optic diode laser in microscopic cholesteatoma surgery. The curved, adjustable laser fibre allows accurate and atraumatic disease removal when the use of a straight laser fibre may be less effective or accurate. It reduces potential damage to delicate structures without the need for extra drilling or bone removal. It is suggested that the curved adjustable laser fibre is superior to the traditional straight fibre for cholesteatoma surgery.

  5. Parallel Curves: Getting There and Getting Back

    ERIC Educational Resources Information Center

    Agnew, A. F.; Mathews, J. H.

    2006-01-01

    This note takes up the issue of parallel curves while illustrating the utility of "Mathematica" in computations. This work complements results presented earlier. The presented treatment, considering the more general case of parametric curves, provides an analysis of the appearance of cusp singularities, and emphasizes the utility of symbolic…

  6. New Binary Systems With Asymmetric Light Curves

    NASA Astrophysics Data System (ADS)

    Virnina, Natalia A.

    2010-12-01

    We present the results of investigation of the light curves of 27 newly discovered binary systems. Among the examined curves, there were 10 curves with statistically significant asymmetry of maximums, according the 3σ criterion for the difference between the maximal brightness. Half of these 10 curves have a higher first maximum, another half the second one. Two of these 10 curves, USNO-B1.0 1629-0064825 = VSX J052807.9+725606 and USNO-B1.0 1586-0116785, show the largest difference between magnitudes in maxima. The star VSX J052807.9+725606 also shows the secondary minimum, which is shifted from the phase φ = 0.5. The shape of the curve argues that the physical processes of this star could be close to that of well known short periodic binary system V361 Lyr, which has a spot on the surface of one star of the system. Another star, USNO-B1.0 1586-0116785, probably has a cold spot, or several spots, in the photosphere of one of the components.

  7. Learning Curve and Clinical Outcomes of Performing Surgery with the InterTan Intramedullary Nail in Treating Femoral Intertrochanteric Fractures

    PubMed Central

    2017-01-01

    Purpose. The purpose of this study is to evaluate the learning curve of performing surgery with the InterTan intramedullary nail in treating femoral intertrochanteric fractures, to provide valuable information and experience for surgeons who decide to learn a new procedure. Methods. We retrospectively analyzed data from 53 patients who underwent surgery using an InterTan intramedullary nail at our hospital between July 2012 and September 2015. The negative exponential curve-fit regression analysis was used to evaluate the learning curve. According to 90% learning milestone, patients were divided into two group, and the outcomes were compared. Results. The mean operative time was 69.28 (95% CI 64.57 to 74.00) minutes; with the accumulation of surgical experience, the operation time was gradually decreased. 90% of the potential improvement was expected after 18 cases. In terms of operative time, intraoperative blood loss, hospital stay, and Harris hip score significant differences were found between two groups (p = 0.009, p = 0.000, p = 0.030, and p = 0.002, resp.). Partial weight bearing time, fracture union time, tip apex distance, and the number of blood transfusions and complications were similar between two groups (p > 0.5). Conclusion. This study demonstrated that the learning curve of performing surgery with the InterTan intramedullary nail is acceptable and 90% of the expert's proficiency level is achieved at around 18 cases. PMID:28503572

  8. Bridging the Gap between Social Acceptance and Ethical Acceptability.

    PubMed

    Taebi, Behnam

    2017-10-01

    New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological risk, particularly when we evaluate technologies with transnational and intergenerational risks. I argue that good governance of risky technology requires analyzing both social acceptance and ethical acceptability. Conceptually, these two notions are mostly complementary. Social acceptance studies are not capable of sufficiently capturing all the morally relevant features of risky technologies; ethical analyses do not typically include stakeholders' opinions, and they therefore lack the relevant empirical input for a thorough ethical evaluation. Only when carried out in conjunction are these two types of analysis relevant to national and international governance of risky technology. I discuss the Rawlsian wide reflective equilibrium as a method for marrying social acceptance and ethical acceptability. Although the rationale of my argument is broadly applicable, I will examine the case of multinational nuclear waste repositories in particular. This example will show how ethical issues may be overlooked if we focus only on social acceptance, and will provide a test case for demonstrating how the wide reflective equilibrium can help to bridge the proverbial acceptance-acceptability gap. © 2016 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

  9. Greater Activity in the Frontal Cortex on Left Curves: A Vector-Based fNIRS Study of Left and Right Curve Driving

    PubMed Central

    Oka, Noriyuki; Yoshino, Kayoko; Yamamoto, Kouji; Takahashi, Hideki; Li, Shuguang; Sugimachi, Toshiyuki; Nakano, Kimihiko; Suda, Yoshihiro; Kato, Toshinori

    2015-01-01

    Objectives In the brain, the mechanisms of attention to the left and the right are known to be different. It is possible that brain activity when driving also differs with different horizontal road alignments (left or right curves), but little is known about this. We found driver brain activity to be different when driving on left and right curves, in an experiment using a large-scale driving simulator and functional near-infrared spectroscopy (fNIRS). Research Design and Methods The participants were fifteen healthy adults. We created a course simulating an expressway, comprising straight line driving and gentle left and right curves, and monitored the participants under driving conditions, in which they drove at a constant speed of 100 km/h, and under non-driving conditions, in which they simply watched the screen (visual task). Changes in hemoglobin concentrations were monitored at 48 channels including the prefrontal cortex, the premotor cortex, the primary motor cortex and the parietal cortex. From orthogonal vectors of changes in deoxyhemoglobin and changes in oxyhemoglobin, we calculated changes in cerebral oxygen exchange, reflecting neural activity, and statistically compared the resulting values from the right and left curve sections. Results Under driving conditions, there were no sites where cerebral oxygen exchange increased significantly more during right curves than during left curves (p > 0.05), but cerebral oxygen exchange increased significantly more during left curves (p < 0.05) in the right premotor cortex, the right frontal eye field and the bilateral prefrontal cortex. Under non-driving conditions, increases were significantly greater during left curves (p < 0.05) only in the right frontal eye field. Conclusions Left curve driving was thus found to require more brain activity at multiple sites, suggesting that left curve driving may require more visual attention than right curve driving. The right frontal eye field was activated under both

  10. Harz/Vesper: Acceptance Research with Logical Relations and Pragma-Dialectics

    NASA Astrophysics Data System (ADS)

    Harz, M.

    2012-04-01

    We use two different theories for our research on the acceptance of carbon capture and storage (CCS), geothermal energy and shale gas: logical relations and pragma-dialectics. With the theory of logical relations we can describe the structure of the terminus "acceptance" as a three-place or more relationship. We use the Newtonian binominal coefficients order to reflect on the complexity of the concept of acceptance. We are exploring relations between citizens, politicians, scientists, businesses and technologies. The technological-philosophical reflection on the topic "Determinants for acceptance of new technologies" concerns the issues of "Trust", "Security" as well as "Interest and Use" as the essential constituents of acceptance. Trust: Politicians, scientists and entrepreneurs need to understand themselves as advocates of acceptance. Acceptance is not automatic but requires a great effort and continuous personal commitment, as you want to secure acceptance not only for the short-term but for the long-term. The confidence curve follows a hysteresis loop as known from the magnetization of materials: It requires a significant effort. If the existing trust is lost due to erroneous communication or incorrect political action, the restoration effort is significantly greater. Citizens need to understand themselves as being asked for acceptance and as actively influencing the shapes of their life. They may not feel as victims or sufferers from technological developments but should have a realistic feeling of being able to influence - in fact - anything. "Openness creates openness." (H.-J. Bullinger) Security: The advocate promoting acceptance must take into account the security needs of the citizens with regard to the technologies which are supposed to be accepted. Even irrational fears are actual fears that can prevent acceptance. Interests and Goals of Usage: The advocate promoting acceptance must - sincerely and publicly - express his interest in the use and goals

  11. The assessment of the impact of socio-economic factors in accepting cancer using the Acceptance of Illness Scale (AIS).

    PubMed

    Czerw, Aleksandra I; Bilińska, Magdalena; Deptała, Andrzej

    2016-01-01

    The paper presents the results of examining the level of acceptance of the illness in cancer patients using the Acceptance of Illness Scale (AIS). The study involved cancer patients treated at the Central Clinical Hospital of the Ministry the Interior in Warsaw in 2014. The questionnaire comprised basic demographic questions (socio-economic factors) and the AIS test estimating the level of illness acceptance in patients. For the group of patients in the research group, the arithmetic mean amounted to 27.56 points. The period of time that elapsed between the first cancer diagnosis and the start of the study did not influence the score of accepting illness. The acceptance of illness in patients diagnosed with metastases differed from the acceptance of illness by patients diagnosed with metastatic cancer. Females obtained the average of 29.59 in the AIS test, whereas the average in male patients was 26.17. The patients' age did not impact the AIS test. There were no differences in the AIS test results between a group of people with secondary education and a group of people with higher education. There were no differences in the AIS test results between employed individuals versus pensioners. The inhabitants of cities were characterized by the highest degree of acceptance of their health condition. The lowest degree of acceptance of illness was observed in the group with the lowest average incomes. In the group of married individuals the average degree of acceptance of illness amounted to 27.37 points. The average degree of acceptance of illness in patients that declared themselves as single amounted to 25.75. The average degree of acceptance of illness in the study group was 27.56 points, which is a relatively high level of acceptance of cancer. The main socio-economic factor, which influenced the AIS test results was whether metastases were diagnosed or not. There were no differences between patients in groups where the time that elapsed from the first diagnosis of

  12. Apollo experience report environmental acceptance testing

    NASA Technical Reports Server (NTRS)

    Laubach, C. H. M.

    1976-01-01

    Environmental acceptance testing was used extensively to screen selected spacecraft hardware for workmanship defects and manufacturing flaws. The minimum acceptance levels and durations and methods for their establishment are described. Component selection and test monitoring, as well as test implementation requirements, are included. Apollo spacecraft environmental acceptance test results are summarized, and recommendations for future programs are presented.

  13. Curved bones: An adaptation to habitual loading.

    PubMed

    Milne, Nick

    2016-10-21

    Why are long bones curved? It has long been considered a paradox that many long bones supporting mammalian bodies are curved, since this curvature results in the bone undergoing greater bending, with higher strains and so greater fracture risk under load. This study develops a theoretical model wherein the curvature is a response to bending strains imposed by the requirements of locomotion. In particular the radioulna of obligate quadrupeds is a lever operated by the triceps muscle, and the bending strains induced by the triceps muscle counter the bending resulting from longitudinal loads acting on the curved bone. Indeed the theoretical model reverses this logic and suggests that the curvature is itself a response to the predictable bending strains induced by the triceps muscle. This, in turn, results in anatomical arrangements of bone, muscle and tendon that create a simple physiological mechanism whereby the bone can resist the bending due to the action of triceps in supporting and moving the body. The model is illustrated by contrasting the behaviour of a finite element model of a llama radioulna to that of a straightened version of the same bone. The results show that longitudinal and flexor muscle forces produce bending strains that effectively counter strains due to the pull of the triceps muscle in the curved but not in the straightened model. It is concluded that the curvature of these and other curved bones adds resilience to the skeleton by acting as pre-stressed beams or strainable pre-buckled struts. It is also proposed that the cranial bending strains that result from triceps, acting on the lever that is the radioulna, can explain the development of the curvature of such bones. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  14. Acceptance-based versus standard behavioral treatment for obesity: Results from the mind your health randomized controlled trial.

    PubMed

    Forman, Evan M; Butryn, Meghan L; Manasse, Stephanie M; Crosby, Ross D; Goldstein, Stephanie P; Wyckoff, Emily P; Thomas, J Graham

    2016-10-01

    To evaluate the efficacy, as well as potential moderators and mediators, of a revised acceptance-based behavioral treatment (ABT) for obesity, relative to standard behavioral treatment (SBT). Participants with overweight and obesity (n = 190) were randomized to 25 sessions of ABT or SBT over 1 year. Primary outcome (weight), mediator, and moderator measurements were taken at baseline, 6 months, and/or 12 months, and weight was also measured every session. Participants assigned to ABT attained a significantly greater 12-month weight loss (13.3% ± 0.83%) than did those assigned to SBT (9.8% ± 0.87%; P = 0.005). A condition by quadratic time effect on session-by-session weights (P = 0.01) indicated that SBT had a shallower trajectory of weight loss followed by an upward deflection. ABT participants were also more likely to maintain a 10% weight loss at 12 months (64.0% vs. 48.9%; P = 0.04). No evidence of moderation was found. Results supported the mediating role of autonomous motivation and psychological acceptance of food-related urges. Behavioral weight loss outcomes can be improved by integrating self-regulation skills that are reflected in acceptance-based treatment, i.e., tolerating discomfort and reduction in pleasure, enacting commitment to valued behavior, and being mindfully aware during moments of decision-making. © 2016 The Obesity Society.

  15. Tools to identify linear combination of prognostic factors which maximizes area under receiver operator curve.

    PubMed

    Todor, Nicolae; Todor, Irina; Săplăcan, Gavril

    2014-01-01

    The linear combination of variables is an attractive method in many medical analyses targeting a score to classify patients. In the case of ROC curves the most popular problem is to identify the linear combination which maximizes area under curve (AUC). This problem is complete closed when normality assumptions are met. With no assumption of normality search algorithm are avoided because it is accepted that we have to evaluate AUC n(d) times where n is the number of distinct observation and d is the number of variables. For d = 2, using particularities of AUC formula, we described an algorithm which lowered the number of evaluations of AUC from n(2) to n(n-1) + 1. For d > 2 our proposed solution is an approximate method by considering equidistant points on the unit sphere in R(d) where we evaluate AUC. The algorithms were applied to data from our lab to predict response of treatment by a set of molecular markers in cervical cancers patients. In order to evaluate the strength of our algorithms a simulation was added. In the case of no normality presented algorithms are feasible. For many variables computation time could be increased but acceptable.

  16. Utilization of curve offsets in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Haseltalab, Vahid; Yaman, Ulas; Dolen, Melik

    2018-05-01

    Curve offsets are utilized in different fields of engineering and science. Additive manufacturing, which lately becomes an explicit requirement in manufacturing industry, utilizes curve offsets widely. One of the necessities of offsetting is for scaling which is required if there is shrinkage after the fabrication or if the surface quality of the resulting part is unacceptable. Therefore, some post-processing is indispensable. But the major application of curve offsets in additive manufacturing processes is for generating head trajectories. In a point-wise AM process, a correct tool-path in each layer can reduce lots of costs and increase the surface quality of the fabricated parts. In this study, different curve offset generation algorithms are analyzed to show their capabilities and disadvantages through some test cases and improvements on their drawbacks are suggested.

  17. [Comparison among various software for LMS growth curve fitting methods].

    PubMed

    Han, Lin; Wu, Wenhong; Wei, Qiuxia

    2015-03-01

    To explore the methods to realize the growth curve fitting of coefficients of skewness-median-coefficient of variation (LMS) using different software, and to optimize growth curve statistical method for grass-root child and adolescent staffs. Regular physical examination data of head circumference for normal infants aging 3, 6, 9 and 12 months in Baotou City were analyzed. Statistical software such as SAS, R, STATA and SPSS were used to fit the LMS growth curve and the results were evaluated upon the user 's convenience, study circle, user interface, results display forms, software update and maintenance and so on. Growth curve fitting results showed the same calculation outcome and each of statistical software had its own advantages and disadvantages. With all the evaluation aspects in consideration, R software excelled others in LMS growth curve fitting. R software have the advantage over other software in grass roots child and adolescent staff.

  18. Tornado-Shaped Curves

    ERIC Educational Resources Information Center

    Martínez, Sol Sáez; de la Rosa, Félix Martínez; Rojas, Sergio

    2017-01-01

    In Advanced Calculus, our students wonder if it is possible to graphically represent a tornado by means of a three-dimensional curve. In this paper, we show it is possible by providing the parametric equations of such tornado-shaped curves.

  19. Gerontechnology acceptance by elderly Hong Kong Chinese: a senior technology acceptance model (STAM).

    PubMed

    Chen, Ke; Chan, Alan Hoi Shou

    2014-01-01

    The purpose of this study was to develop and test a senior technology acceptance model (STAM) aimed at understanding the acceptance of gerontechnology by older Hong Kong Chinese people. The proposed STAM extended previous technology acceptance models and theories by adding age-related health and ability characteristics of older people. The proposed STAM was empirically tested using a cross-sectional questionnaire survey with a sample of 1012 seniors aged 55 and over in Hong Kong. The result showed that STAM was strongly supported and could explain 68% of the variance in the use of gerontechnology. For older Hong Kong Chinese, individual attributes, which include age, gender, education, gerontechnology self-efficacy and anxiety, and health and ability characteristics, as well as facilitating conditions explicitly and directly affected technology acceptance. These were better predictors of gerontechnology usage behaviour (UB) than the conventionally used attitudinal factors (usefulness and ease of use).

  20. Tracing Personalized Health Curves during Infections

    PubMed Central

    Schneider, David S.

    2011-01-01

    It is difficult to describe host–microbe interactions in a manner that deals well with both pathogens and mutualists. Perhaps a way can be found using an ecological definition of tolerance, where tolerance is defined as the dose response curve of health versus parasite load. To plot tolerance, individual infections are summarized by reporting the maximum parasite load and the minimum health for a population of infected individuals and the slope of the resulting curve defines the tolerance of the population. We can borrow this method of plotting health versus microbe load in a population and make it apply to individuals; instead of plotting just one point that summarizes an infection in an individual, we can plot the values at many time points over the course of an infection for one individual. This produces curves that trace the course of an infection through phase space rather than over a more typical timeline. These curves highlight relationships like recovery and point out bifurcations that are difficult to visualize with standard plotting techniques. Only nine archetypical curves are needed to describe most pathogenic and mutualistic host–microbe interactions. The technique holds promise as both a qualitative and quantitative approach to dissect host–microbe interactions of all kinds. PMID:21957398

  1. Transition to Turbulence in curved pipe

    NASA Astrophysics Data System (ADS)

    Hashemi, Amirreza; Loth, Francis

    2014-11-01

    Studies have shown that transitional turbulence in a curved pipe is delayed significantly compared with straight pipes. These analytical, numerical and experimental studies employed a helical geometry that is infinitely long such that the effect of the inlet and outlet can be neglected. The present study examined transition to turbulence in a finite curved pipe with a straight inlet/outlet and a 180 degrees curved pipe with a constant radius of curvature and diameter (D). We have employed the large scale direct numerical simulation (DNS) by using the spectral element method, nek5000, to simulate the flow field within curved pipe geometry with different curvature radii and Reynolds numbers to determine the point of the transition to turbulence. Long extensions for the inlet (5D) and outlet (20D) were used to diminish the effect of the boundary conditions. Our numerical results for radius of curvatures of 1.5D and 5D show transition turbulence is near Re = 3000. This is delayed compared with a straight pipe (Re = 2200) but still less that observed for helical geometries (Reynolds number less than 5000). Our research aims to describe the critical Reynolds number for transition to turbulence for a finite curved pipe at various curvature radii.

  2. Curve fitting air sample filter decay curves to estimate transuranic content.

    PubMed

    Hayes, Robert B; Chiou, Hung Cheng

    2004-01-01

    By testing industry standard techniques for radon progeny evaluation on air sample filters, a new technique is developed to evaluate transuranic activity on air filters by curve fitting the decay curves. The industry method modified here is simply the use of filter activity measurements at different times to estimate the air concentrations of radon progeny. The primary modification was to not look for specific radon progeny values but rather transuranic activity. By using a method that will provide reasonably conservative estimates of the transuranic activity present on a filter, some credit for the decay curve shape can then be taken. By carrying out rigorous statistical analysis of the curve fits to over 65 samples having no transuranic activity taken over a 10-mo period, an optimization of the fitting function and quality tests for this purpose was attained.

  3. Bragg Curve, Biological Bragg Curve and Biological Issues in Space Radiation Protection with Shielding

    NASA Technical Reports Server (NTRS)

    Honglu, Wu; Cucinotta, F.A.; Durante, M.; Lin, Z.; Rusek, A.

    2006-01-01

    The space environment consists of a varying field of radiation particles including high-energy ions, with spacecraft shielding material providing the major protection to astronauts from harmful exposure. Unlike low-LET gamma or X-rays, the presence of shielding does not always reduce the radiation risks for energetic charged particle exposure. Since the dose delivered by the charged particle increases sharply as the particle approaches the end of its range, a position known as the Bragg peak, the Bragg curve does not necessarily represent the biological damage along the particle traversal since biological effects are influenced by the track structure of both primary and secondary particles. Therefore, the biological Bragg curve is dependent on the energy and the type of the primary particle, and may vary for different biological endpoints. To achieve a Bragg curve distribution, we exposed cells to energetic heavy ions with the beam geometry parallel to a monolayer of fibroblasts. Qualitative analyses of gamma-H2AX fluorescence, a known marker of DSBs, indicated increased clustering of DNA damage before the Bragg peak, enhanced homogenous distribution at the peak, and provided visual evidence of high linear energy transfer (LET) particle traversal of cells beyond the Bragg peak. A quantitative biological response curve generated for micronuclei (MN) induction across the Bragg curve did not reveal an increased yield of MN at the location of the Bragg peak. However, the ratio of mono-to bi-nucleated cells, which indicates inhibition in cell progression, increased at the Bragg peak location. These results, along with other biological concerns, show that space radiation protection with shielding can be a complicated issue.

  4. In-Vehicle Dynamic Curve-Speed Warnings at High-Risk Rural Curves

    DOT National Transportation Integrated Search

    2018-03-01

    Lane-departure crashes at horizontal curves represent a significant portion of fatal crashes on rural Minnesota roads. Because of this, solutions are needed to aid drivers in identifying upcoming curves and inform them of a safe speed at which they s...

  5. Enrichment of Biscuits with Matcha Green Tea Powder: Its Impact on Consumer Acceptability and Acute Metabolic Response

    PubMed Central

    Phongnarisorn, Benjapor; Orfila, Caroline; Holmes, Melvin; Marshall, Lisa J.

    2018-01-01

    Matcha green tea powder (MGTP) is made with finely ground green tea leaves that are rich in phytochemicals, most particularly catechins. Shortbread biscuits were enriched with MGTP and evaluated for consumer acceptability and potential functional health properties. Baking decreased the content of total catechins by 19% compared to dough, although epimerization increased the amount of (+)-gallocatechin gallate at the expense of other catechins such as (−)-epigallocatechin gallate. Consumer acceptability tests using a 9-point hedonic scale showed that consumers preferred enriched biscuits with low content of MGTP (2 g of MGTP 100 g−1 of flour), and an increase of sugar content did not significantly improve the acceptability of MGTP-enriched biscuits. Overall, enrichment of biscuits with MGTP did not significantly affect the postprandial glucose or triglyceride response (area under curve) compared to non-enriched biscuits consumed with water or MGTP drink. Enriching biscuits with Matcha green tea is acceptable to consumers, but may not bring significant postprandial effects. PMID:29389844

  6. Enrichment of Biscuits with Matcha Green Tea Powder: Its Impact on Consumer Acceptability and Acute Metabolic Response.

    PubMed

    Phongnarisorn, Benjapor; Orfila, Caroline; Holmes, Melvin; Marshall, Lisa J

    2018-02-01

    Matcha green tea powder (MGTP) is made with finely ground green tea leaves that are rich in phytochemicals, most particularly catechins. Shortbread biscuits were enriched with MGTP and evaluated for consumer acceptability and potential functional health properties. Baking decreased the content of total catechins by 19% compared to dough, although epimerization increased the amount of (+)-gallocatechin gallate at the expense of other catechins such as (-)-epigallocatechin gallate. Consumer acceptability tests using a 9-point hedonic scale showed that consumers preferred enriched biscuits with low content of MGTP (2 g of MGTP 100 g -1 of flour), and an increase of sugar content did not significantly improve the acceptability of MGTP-enriched biscuits. Overall, enrichment of biscuits with MGTP did not significantly affect the postprandial glucose or triglyceride response (area under curve) compared to non-enriched biscuits consumed with water or MGTP drink. Enriching biscuits with Matcha green tea is acceptable to consumers, but may not bring significant postprandial effects.

  7. Optimization of Composite Structures with Curved Fiber Trajectories

    NASA Astrophysics Data System (ADS)

    Lemaire, Etienne; Zein, Samih; Bruyneel, Michael

    2014-06-01

    This paper studies the problem of optimizing composites shells manufactured using Automated Tape Layup (ATL) or Automated Fiber Placement (AFP) processes. The optimization procedure relies on a new approach to generate equidistant fiber trajectories based on Fast Marching Method. Starting with a (possibly curved) reference fiber direction defined on a (possibly curved) meshed surface, the new method allows determining fibers orientation resulting from a uniform thickness layup. The design variables are the parameters defining the position and the shape of the reference curve which results in very few design variables. Thanks to this efficient parameterization, maximum stiffness optimization numerical applications are proposed. The shape of the design space is discussed, regarding local and global optimal solutions.

  8. Peer acceptance protects global self-esteem from negative effects of low closeness to parents during adolescence and early adulthood.

    PubMed

    Birkeland, Marianne Skogbrott; Breivik, Kyrre; Wold, Bente

    2014-01-01

    Having a distant relationship with parents seems to increase the risk of developing a more negative global self-esteem. This article describes a longitudinal study of 1,090 Norwegian adolescents from the age of 13-23 (54 % males) that explored whether peer acceptance can act as a moderator and protect global self-esteem against the negative effects of experiencing low closeness in relationships with parents. A quadratic latent growth curve for global self-esteem with closeness to parents and peer acceptance as time-varying covariates was modeled, taking partial measurement invariance in global self-esteem into account. Peer acceptance was found to have a general protective effect on global self-esteem for all adolescents. In addition, at most ages, peer acceptance was found to have a protective-stabilizing effect on the relationship between closeness to parents and global self-esteem. This indicates that peer acceptance can be an especially valuable source of global self-esteem when closeness to parents is low.

  9. Feasibility, acceptability and clinical utility of the Cultural Formulation Interview: mixed-methods results from the DSM-5 international field trial.

    PubMed

    Lewis-Fernández, Roberto; Aggarwal, Neil Krishan; Lam, Peter C; Galfalvy, Hanga; Weiss, Mitchell G; Kirmayer, Laurence J; Paralikar, Vasudeo; Deshpande, Smita N; Díaz, Esperanza; Nicasio, Andel V; Boiler, Marit; Alarcón, Renato D; Rohlof, Hans; Groen, Simon; van Dijk, Rob C J; Jadhav, Sushrut; Sarmukaddam, Sanjeev; Ndetei, David; Scalco, Monica Z; Bassiri, Kavoos; Aguilar-Gaxiola, Sergio; Ton, Hendry; Westermeyer, Joseph; Vega-Dienstmaier, Johann M

    2017-04-01

    Background There is a need for clinical tools to identify cultural issues in diagnostic assessment. Aims To assess the feasibility, acceptability and clinical utility of the DSM-5 Cultural Formulation Interview (CFI) in routine clinical practice. Method Mixed-methods evaluation of field trial data from six countries. The CFI was administered to diagnostically diverse psychiatric out-patients during a diagnostic interview. In post-evaluation sessions, patients and clinicians completed debriefing qualitative interviews and Likert-scale questionnaires. The duration of CFI administration and the full diagnostic session were monitored. Results Mixed-methods data from 318 patients and 75 clinicians found the CFI feasible, acceptable and useful. Clinician feasibility ratings were significantly lower than patient ratings and other clinician-assessed outcomes. After administering one CFI, however, clinician feasibility ratings improved significantly and subsequent interviews required less time. Conclusions The CFI was included in DSM-5 as a feasible, acceptable and useful cultural assessment tool. © The Royal College of Psychiatrists 2017.

  10. [Willingness to accept an Internet-based mobility platform in different age cohorts. Empiric results of the project S-Mobil 100].

    PubMed

    Beil, J; Cihlar, V; Kruse, A

    2015-02-01

    The aim of the project S-Mobil 100 is to develop and implement a prototype of an internet-based, generation-appropriate mobility platform in the model region Siegen-Wittgenstein. In the context of an empirical preliminary study, use of technology, experience with technology, general attitudes towards technology, general technology commitment, and the willingness to accept the mobility platform were investigated in different age cohorts. The investigation was carried out using a written survey based on a standardized questionnaire. The sample of 358 persons aged 40-90 years was divided in four age cohorts (40-54, 55-64, 65-74, and 75 + years). Our results show a high willingness to accept the mobility platform in the overall sample. Age, residence, income, and general technology commitment were significant predictors for the judgment of the platform. Although there were group differences in accepting the mobility platform, the older cohorts are also open-minded towards this new technology.

  11. Applying site-index curves to northern hardwoods in New Hampshire

    Treesearch

    Dale S. Solomon

    1968-01-01

    Describes a new method for testing site-index curves. Study results indicate that Vermont site-index curves for yellow birch, paper birch, white ash, and sugar maple, and New York-Connecticut curves for red maple, can be applied satisfactorily in New Hampshire when used with certain precautions and corrections.

  12. The Axial Curve Rotator.

    ERIC Educational Resources Information Center

    Hunter, Walter M.

    This document contains detailed directions for constructing a device that mechanically produces the three-dimensional shape resulting from the rotation of any algebraic line or curve around either axis on the coordinate plant. The device was developed in response to student difficulty in visualizing, and thus grasping the mathematical principles…

  13. Bracing can reduce high degree curves and improve aesthetics immediately after the end of growth. Final results of a retrospective case series.

    PubMed

    Negrini, Stefano; Donzelli, Sabrina; Lusini, Monia; Zaina, Fabio

    2012-01-01

    Recently it has been shown that idiopathic scoliosis (IS) curves can be reduced with bracing, and it has been proposed that this could be useful in non-surgically treated high degree curves even after Risser 3. Moreover, bracing has been shown to be able to improve aesthetics, and this could be another reason to treat some patients with cosmetic needs. Our aim is to preliminary check if results can be obtained in IS patients after Risser 3. Design. Retrospective uncontrolled cohort study. Inclusion criteria. All IS patients treated on a voluntary basis for aesthetic reasons and/or for curve reduction; Risser 4-5 at start; end of treatment reached. Population. 34 females and 2 males, age 16.2±1.6 years, Cobb angle 27.6°±8.9°. Treatment. Lyon or SPoRT braces 18 to 24 hours/day, specific SEAS exercises, rapid weaning (2-3 hours every 6 months). Outcome criteria: SRS (unchanged; worsened over 6°; over 45° at the end of treatment; surgically treated), radiographic and clinical. Statistics. ANOVA and chi-test. The reported compliance during the 2.8 ± 1.1 treatment years was 95.1%, while residual growth was 0.9 ± 1.1 cm. Improvements were found in 39% of this cohort, (46% in curves over 30°). Only 1 patient progressed 6°. We found highly statistically significant reductions of maximal (-4.4°), thoracic (-6.0°) and thoracolumbar (-6.6°) curves. Statistically significant improvements were found for Aesthetic Index. Before 20 years of age, even in skeletally mature patients, it is possible to reach radiographic and aesthetic improvements, although not as good as during growth. Correction is based on bone growth, but ligaments and neuromuscular control of posture can also be involved.

  14. Evaluation of the learning curve for external cephalic version using cumulative sum analysis.

    PubMed

    Kim, So Yun; Han, Jung Yeol; Chang, Eun Hye; Kwak, Dong Wook; Ahn, Hyun Kyung; Ryu, Hyun Mi; Kim, Moon Young

    2017-07-01

    We evaluated the learning curve for external cephalic version (ECV) using learning curve-cumulative sum (LC-CUSUM) analysis. This was a retrospective study involving 290 consecutive cases between October 2013 and March 2017. We evaluated the learning curve for ECV on nulli and over para 1 group using LC-CUSUM analysis on the assumption that 50% and 70% of ECV procedures succeeded by description a trend-line of quadratic function with reliable R 2 values. The overall success rate for ECV was 64.8% (188/290), while the success rate for nullipara and over para 1 groups was 56.2% (100/178) and 78.6% (88/112), respectively. 'H' value, that the actual failure rate does not differ from the acceptable failure rate, was -3.27 and -1.635 when considering ECV success rates of 50% and 70%, respectively. Consequently, in order to obtain a consistent 50% success rate, we would require 57 nullipara cases, and in order to obtain a consistent 70% success rate, we would require 130 nullipara cases. In contrast, 8 to 10 over para 1 cases would be required for an expected success rate of 50% and 70% on over para 1 group. Even a relatively inexperienced physician can experience success with multipara and after accumulating experience, they will manage nullipara cases. Further research is required for LC-CUSUM involving several practitioners instead of a single practitioner. This will lead to the gradual implementation of standard learning curve guidelines for ECV.

  15. Curved CCD detector devices and arrays for multispectral astrophysical applications and terrestrial stereo panoramic cameras

    NASA Astrophysics Data System (ADS)

    Swain, Pradyumna; Mark, David

    2004-09-01

    their flat CCD counterparts, lightening the cameras and enabling faster scanning and 3D integration of objects moving within a planetary terrain environment. Preliminary experiments conducted at the Sarnoff Corporation indicate the feasibility of curved CCD imagers with acceptable electro-optic integrity. Currently, we are in the process of evaluating the electro-optic performance of a curved wafer scale CCD imager. Detailed ray trace modeling and experimental electro-optical data performance obtained from the curved imager will be presented at the conference.

  16. Estimating the R-curve from residual strength data

    NASA Technical Reports Server (NTRS)

    Orange, T. W.

    1985-01-01

    A method is presented for estimating the crack-extension resistance curve (R-curve) from residual-strength (maximum load against original crack length) data for precracked fracture specimens. The method allows additional information to be inferred from simple test results, and that information can be used to estimate the failure loads of more complicated structures of the same material and thickness. The fundamentals of the R-curve concept are reviewed first. Then the analytical basis for the estimation method is presented. The estimation method has been verified in two ways. Data from the literature (involving several materials and different types of specimens) are used to show that the estimated R-curve is in good agreement with the measured R-curve. A recent predictive blind round-robin program offers a more crucial test. When the actual failure loads are disclosed, the predictions are found to be in good agreement.

  17. Bending the Curve: Sensitivity to Bending of Curved Paths and Application in Room-Scale VR.

    PubMed

    Langbehn, Eike; Lubos, Paul; Bruder, Gerd; Steinicke, Frank

    2017-04-01

    Redirected walking (RDW) promises to allow near-natural walking in an infinitely large virtual environment (VE) by subtle manipulations of the virtual camera. Previous experiments analyzed the human sensitivity to RDW manipulations by focusing on the worst-case scenario, in which users walk perfectly straight ahead in the VE, whereas they are redirected on a circular path in the real world. The results showed that a physical radius of at least 22 meters is required for undetectable RDW. However, users do not always walk exactly straight in a VE. So far, it has not been investigated how much a physical path can be bent in situations in which users walk a virtual curved path instead of a straight one. Such curved walking paths can be often observed, for example, when users walk on virtual trails, through bent corridors, or when circling around obstacles. In such situations the question is not, whether or not the physical path can be bent, but how much the bending of the physical path may vary from the bending of the virtual path. In this article, we analyze this question and present redirection by means of bending gains that describe the discrepancy between the bending of curved paths in the real and virtual environment. Furthermore, we report the psychophysical experiments in which we analyzed the human sensitivity to these gains. The results reveal encouragingly wider detection thresholds than for straightforward walking. Based on our findings, we discuss the potential of curved walking and present a first approach to leverage bent paths in a way that can provide undetectable RDW manipulations even in room-scale VR.

  18. Nut-enriched bread is an effective and acceptable vehicle to improve regular nut consumption.

    PubMed

    Devi, Asika; Chisholm, Alexandra; Gray, Andrew; Tey, Siew Ling; Williamson-Poutama, Destynee; Cameron, Sonya L; Brown, Rachel C

    2016-10-01

    Consuming 30 g of nuts/day is recommended to reduce chronic disease. However, nut consumption appears far from ideal among several populations. A potential strategy to increase consumption is to add nuts to a staple, for example, bread. Whether the health benefits and acceptability of nuts persist in this form is currently unknown. Thus, we examined the effects of consuming three nut-enriched breads on postprandial glycaemia, satiety, gastrointestinal tolerance, dietary intakes, and acceptance. In this controlled, crossover study, 32 participants were randomly allocated to receive one of four breads for 8 days each. Three breads contained either 30 g of finely sliced hazelnuts, 30 g semi-defatted hazelnut flour, or 15 g of each (amounts per 120 g bread) and were compared with a control nut-free bread. Blood glucose response was measured over 120 min, along with ratings of gastrointestinal discomfort. Appetite ratings and diet diaries were completed during each treatment period. Area under the blood glucose curve was significantly lower for the nut breads compared to the control bread (all P < 0.001), with no significant differences between the nut breads (all P ≥ 0.130). There were no significant differences in satiety (all P ≥ 0.135) or gastrointestinal symptoms (all P ≥ 0.102) between the breads. Acceptance was highest for the finely sliced hazelnut bread. Furthermore, consuming hazelnut-enriched bread improved diet quality, increasing monounsaturated fat, vitamin E, and dietary fibre intakes. Bread appears to be an effective and acceptable vehicle for increasing nut consumption, resulting in improved postprandial glycaemia and diet profiles. Long-term studies are now required.

  19. Greater Activity in the Frontal Cortex on Left Curves: A Vector-Based fNIRS Study of Left and Right Curve Driving.

    PubMed

    Oka, Noriyuki; Yoshino, Kayoko; Yamamoto, Kouji; Takahashi, Hideki; Li, Shuguang; Sugimachi, Toshiyuki; Nakano, Kimihiko; Suda, Yoshihiro; Kato, Toshinori

    2015-01-01

    In the brain, the mechanisms of attention to the left and the right are known to be different. It is possible that brain activity when driving also differs with different horizontal road alignments (left or right curves), but little is known about this. We found driver brain activity to be different when driving on left and right curves, in an experiment using a large-scale driving simulator and functional near-infrared spectroscopy (fNIRS). The participants were fifteen healthy adults. We created a course simulating an expressway, comprising straight line driving and gentle left and right curves, and monitored the participants under driving conditions, in which they drove at a constant speed of 100 km/h, and under non-driving conditions, in which they simply watched the screen (visual task). Changes in hemoglobin concentrations were monitored at 48 channels including the prefrontal cortex, the premotor cortex, the primary motor cortex and the parietal cortex. From orthogonal vectors of changes in deoxyhemoglobin and changes in oxyhemoglobin, we calculated changes in cerebral oxygen exchange, reflecting neural activity, and statistically compared the resulting values from the right and left curve sections. Under driving conditions, there were no sites where cerebral oxygen exchange increased significantly more during right curves than during left curves (p > 0.05), but cerebral oxygen exchange increased significantly more during left curves (p < 0.05) in the right premotor cortex, the right frontal eye field and the bilateral prefrontal cortex. Under non-driving conditions, increases were significantly greater during left curves (p < 0.05) only in the right frontal eye field. Left curve driving was thus found to require more brain activity at multiple sites, suggesting that left curve driving may require more visual attention than right curve driving. The right frontal eye field was activated under both driving and non-driving conditions.

  20. Curved PVDF airborne transducer.

    PubMed

    Wang, H; Toda, M

    1999-01-01

    In the application of airborne ultrasonic ranging measurement, a partially cylindrical (curved) PVDF transducer can effectively couple ultrasound into the air and generate strong sound pressure. Because of its geometrical features, the ultrasound beam angles of a curved PVDF transducer can be unsymmetrical (i.e., broad horizontally and narrow vertically). This feature is desired in some applications. In this work, a curved PVDF air transducer is investigated both theoretically and experimentally. Two resonances were observed in this transducer. They are length extensional mode and flexural bending mode. Surface vibration profiles of these two modes were measured by a laser vibrometer. It was found from the experiment that the surface vibration was not uniform along the curvature direction for both vibration modes. Theoretical calculations based on a model developed in this work confirmed the experimental results. Two displacement peaks were found in the piezoelectric active direction of PVDF film for the length extensional mode; three peaks were found for the flexural bending mode. The observed peak positions were in good agreement with the calculation results. Transient surface displacement measurements revealed that vibration peaks were in phase for the length extensional mode and out of phase for the flexural bending mode. Therefore, the length extensional mode can generate a stronger ultrasound wave than the flexural bending mode. The resonance frequencies and vibration amplitudes of the two modes strongly depend on the structure parameters as well as the material properties. For the transducer design, the theoretical model developed in this work can be used to optimize the ultrasound performance.

  1. Magnetism in curved geometries

    DOE PAGES

    Streubel, Robert; Fischer, Peter; Kronast, Florian; ...

    2016-08-17

    Extending planar two-dimensional structures into the three-dimensional space has become a general trend in multiple disciplines, including electronics, photonics, plasmonics and magnetics. This approach provides means to modify conventional or to launch novel functionalities by tailoring the geometry of an object, e.g. its local curvature. In a generic electronic system, curvature results in the appearance of scalar and vector geometric potentials inducing anisotropic and chiral effects. In the specific case of magnetism, even in the simplest case of a curved anisotropic Heisenberg magnet, the curvilinear geometry manifests two exchange-driven interactions, namely effective anisotropy and antisymmetric exchange, i.e. Dzyaloshinskii–Moriya-like interaction. Asmore » a consequence, a family of novel curvature-driven effects emerges, which includes magnetochiral effects and topologically induced magnetization patterning, resulting in theoretically predicted unlimited domain wall velocities, chirality symmetry breaking and Cherenkov-like effects for magnons. The broad range of altered physical properties makes these curved architectures appealing in view of fundamental research on e.g. skyrmionic systems, magnonic crystals or exotic spin configurations. In addition to these rich physics, the application potential of three-dimensionally shaped objects is currently being explored as magnetic field sensorics for magnetofluidic applications, spin-wave filters, advanced magneto-encephalography devices for diagnosis of epilepsy or for energy-efficient racetrack memory devices. Finally, these recent developments ranging from theoretical predictions over fabrication of three-dimensionally curved magnetic thin films, hollow cylinders or wires, to their characterization using integral means as well as the development of advanced tomography approaches are in the focus of this review.« less

  2. Magnetism in curved geometries

    NASA Astrophysics Data System (ADS)

    Streubel, Robert; Fischer, Peter; Kronast, Florian; Kravchuk, Volodymyr P.; Sheka, Denis D.; Gaididei, Yuri; Schmidt, Oliver G.; Makarov, Denys

    2016-09-01

    Extending planar two-dimensional structures into the three-dimensional space has become a general trend in multiple disciplines, including electronics, photonics, plasmonics and magnetics. This approach provides means to modify conventional or to launch novel functionalities by tailoring the geometry of an object, e.g. its local curvature. In a generic electronic system, curvature results in the appearance of scalar and vector geometric potentials inducing anisotropic and chiral effects. In the specific case of magnetism, even in the simplest case of a curved anisotropic Heisenberg magnet, the curvilinear geometry manifests two exchange-driven interactions, namely effective anisotropy and antisymmetric exchange, i.e. Dzyaloshinskii-Moriya-like interaction. As a consequence, a family of novel curvature-driven effects emerges, which includes magnetochiral effects and topologically induced magnetization patterning, resulting in theoretically predicted unlimited domain wall velocities, chirality symmetry breaking and Cherenkov-like effects for magnons. The broad range of altered physical properties makes these curved architectures appealing in view of fundamental research on e.g. skyrmionic systems, magnonic crystals or exotic spin configurations. In addition to these rich physics, the application potential of three-dimensionally shaped objects is currently being explored as magnetic field sensorics for magnetofluidic applications, spin-wave filters, advanced magneto-encephalography devices for diagnosis of epilepsy or for energy-efficient racetrack memory devices. These recent developments ranging from theoretical predictions over fabrication of three-dimensionally curved magnetic thin films, hollow cylinders or wires, to their characterization using integral means as well as the development of advanced tomography approaches are in the focus of this review.

  3. Magnetism in curved geometries

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Streubel, Robert; Fischer, Peter; Kronast, Florian

    Extending planar two-dimensional structures into the three-dimensional space has become a general trend in multiple disciplines, including electronics, photonics, plasmonics and magnetics. This approach provides means to modify conventional or to launch novel functionalities by tailoring the geometry of an object, e.g. its local curvature. In a generic electronic system, curvature results in the appearance of scalar and vector geometric potentials inducing anisotropic and chiral effects. In the specific case of magnetism, even in the simplest case of a curved anisotropic Heisenberg magnet, the curvilinear geometry manifests two exchange-driven interactions, namely effective anisotropy and antisymmetric exchange, i.e. Dzyaloshinskii–Moriya-like interaction. Asmore » a consequence, a family of novel curvature-driven effects emerges, which includes magnetochiral effects and topologically induced magnetization patterning, resulting in theoretically predicted unlimited domain wall velocities, chirality symmetry breaking and Cherenkov-like effects for magnons. The broad range of altered physical properties makes these curved architectures appealing in view of fundamental research on e.g. skyrmionic systems, magnonic crystals or exotic spin configurations. In addition to these rich physics, the application potential of three-dimensionally shaped objects is currently being explored as magnetic field sensorics for magnetofluidic applications, spin-wave filters, advanced magneto-encephalography devices for diagnosis of epilepsy or for energy-efficient racetrack memory devices. Finally, these recent developments ranging from theoretical predictions over fabrication of three-dimensionally curved magnetic thin films, hollow cylinders or wires, to their characterization using integral means as well as the development of advanced tomography approaches are in the focus of this review.« less

  4. The Ultimate Spitzer Phase Curve Survey

    NASA Astrophysics Data System (ADS)

    Stevenson, Kevin; Bean, Jacob; Deming, Drake; Desert, Jean-Michel; Feng, Y. Katherina; Fortney, Jonathan; Kataria, Tiffany; Kempton, Eliza; Lewis, Nikole; Line, Michael; Morley, Caroline; Rauscher, Emily; Showman, Adam

    2016-08-01

    Exoplanet phase curves are sure to be one of the main enduring legacies of Spitzer. They provide a wealth of information about exoplanet atmospheres, including longitudinal constraints on atmospheric composition, thermal structure, and energy transport, that will continue to open new doors of scientific inquiry and propel future investigations for years to come. The measured heat redistribution efficiency (or ability to transport energy from a planet's highly-irradiated dayside to its eternally-dark nightside) shows considerable variation between exoplanets. Theoretical models predict a correlation between heat redistribution efficiency and planet temperature; however, the latest results are inconsistent with current predictions. Instead, a new potential trend is emerging, one that connects heat redistribution efficiency with planet rotation rate. We will test this hypothesis by performing Spitzer phase curve observations of seven exoplanets with physical properties that span the parameter space. We have identified high-contrast targets with short orbital periods around bright host stars to ensure the observations reveal robust phase curve results. Spitzer is uniquely suited for this program because we can achieve our primary goals using broadband photometry. Part of the phase curve legacy will be to combine our archived Spitzer data with transmission and dayside emission spectra from HST and JWST. Adding energy transport and cloud coverage constraints to the measured dayside abundances and thermal profiles will yield a fundamental understanding of these exoplanets' atmospheres that can be leveraged into new avenues of investigation.

  5. Finite indentation of highly curved elastic shells

    NASA Astrophysics Data System (ADS)

    Pearce, S. P.; King, J. R.; Steinbrecher, T.; Leubner-Metzger, G.; Everitt, N. M.; Holdsworth, M. J.

    2018-01-01

    Experimentally measuring the elastic properties of thin biological surfaces is non-trivial, particularly when they are curved. One technique that may be used is the indentation of a thin sheet of material by a rigid indenter, while measuring the applied force and displacement. This gives immediate information on the fracture strength of the material (from the force required to puncture), but it is also theoretically possible to determine the elastic properties by comparing the resulting force-displacement curves with a mathematical model. Existing mathematical studies generally assume that the elastic surface is initially flat, which is often not the case for biological membranes. We previously outlined a theory for the indentation of curved isotropic, incompressible, hyperelastic membranes (with no bending stiffness) which breaks down for highly curved surfaces, as the entire membrane becomes wrinkled. Here, we introduce the effect of bending stiffness, ensuring that energy is required to change the shell shape without stretching, and find that commonly neglected terms in the shell equilibrium equation must be included. The theory presented here allows for the estimation of shape- and size-independent elastic properties of highly curved surfaces via indentation experiments, and is particularly relevant for biological surfaces.

  6. Finite indentation of highly curved elastic shells

    PubMed Central

    2018-01-01

    Experimentally measuring the elastic properties of thin biological surfaces is non-trivial, particularly when they are curved. One technique that may be used is the indentation of a thin sheet of material by a rigid indenter, while measuring the applied force and displacement. This gives immediate information on the fracture strength of the material (from the force required to puncture), but it is also theoretically possible to determine the elastic properties by comparing the resulting force–displacement curves with a mathematical model. Existing mathematical studies generally assume that the elastic surface is initially flat, which is often not the case for biological membranes. We previously outlined a theory for the indentation of curved isotropic, incompressible, hyperelastic membranes (with no bending stiffness) which breaks down for highly curved surfaces, as the entire membrane becomes wrinkled. Here, we introduce the effect of bending stiffness, ensuring that energy is required to change the shell shape without stretching, and find that commonly neglected terms in the shell equilibrium equation must be included. The theory presented here allows for the estimation of shape- and size-independent elastic properties of highly curved surfaces via indentation experiments, and is particularly relevant for biological surfaces. PMID:29434505

  7. Asymptotic scalings of developing curved pipe flow

    NASA Astrophysics Data System (ADS)

    Ault, Jesse; Chen, Kevin; Stone, Howard

    2015-11-01

    Asymptotic velocity and pressure scalings are identified for the developing curved pipe flow problem in the limit of small pipe curvature and high Reynolds numbers. The continuity and Navier-Stokes equations in toroidal coordinates are linearized about Dean's analytical curved pipe flow solution (Dean 1927). Applying appropriate scaling arguments to the perturbation pressure and velocity components and taking the limits of small curvature and large Reynolds number yields a set of governing equations and boundary conditions for the perturbations, independent of any Reynolds number and pipe curvature dependence. Direct numerical simulations are used to confirm these scaling arguments. Fully developed straight pipe flow is simulated entering a curved pipe section for a range of Reynolds numbers and pipe-to-curvature radius ratios. The maximum values of the axial and secondary velocity perturbation components along with the maximum value of the pressure perturbation are plotted along the curved pipe section. The results collapse when the scaling arguments are applied. The numerically solved decay of the velocity perturbation is also used to determine the entrance/development lengths for the curved pipe flows, which are shown to scale linearly with the Reynolds number.

  8. Older Adults' Acceptance of Activity Trackers

    PubMed Central

    Preusse, Kimberly C.; Mitzner, Tracy L.; Fausset, Cara Bailey; Rogers, Wendy A.

    2016-01-01

    Objective To assess the usability and acceptance of activity tracking technologies by older adults. Method First in our multi-method approach, we conducted heuristic evaluations of two activity trackers that revealed potential usability barriers to acceptance. Next, questionnaires and interviews were administered to 16 older adults (Mage=70, SDage=3.09, rangeage= 65-75) before and after a 28-day field study to understand facilitators and additional barriers to acceptance. These measurements were supplemented with diary and usage data and assessed if and why users overcame usability issues. Results The heuristic evaluation revealed usability barriers in System Status Visibility; Error Prevention; and Consistency and Standards. The field study revealed additional barriers (e.g., accuracy, format), and acceptance-facilitators (e.g., goal-tracking, usefulness, encouragement). Discussion The acceptance of wellness management technologies, such as activity trackers, may be increased by addressing acceptance-barriers during deployment (e.g., providing tutorials on features that were challenging, communicating usefulness). PMID:26753803

  9. A theory-based decision aid for patients with cancer: results of feasibility and acceptability testing of DecisionKEYS for cancer.

    PubMed

    Hollen, Patricia J; Gralla, Richard J; Jones, Randy A; Thomas, Christopher Y; Brenin, David R; Weiss, Geoffrey R; Schroen, Anneke T; Petroni, Gina R

    2013-03-01

    Appropriate utilization of treatment is a goal for all patients undergoing cancer treatment. Proper treatment maximizes benefit and limits exposure to unnecessary measures. This report describes findings of the feasibility and acceptability of implementing a short, clinic-based decision aid and presents an in-depth clinical profile of the participants. This descriptive study used a prospective, quantitative approach to obtain the feasibility and acceptability of a decision aid (DecisionKEYS for Balancing Choices) for use in clinical settings. It combined results of trials of patients with three different common malignancies. All groups used the same decision aid series. Participants included 80 patients with solid tumors (22 with newly diagnosed breast cancer, 19 with advanced prostate cancer, and 39 with advanced lung cancer) and their 80 supporters as well as their physicians and nurses, for a total of 160 participants and 10 health professionals. The decision aid was highly acceptable to patient and supporter participants in all diagnostic groups. It was feasible for use in clinic settings; the overall value was rated highly. Of six physicians, all found the interactive format with the help of the nurse as feasible and acceptable. Nurses also rated the decision aid favorably. This intervention provides the opportunity to enhance decision making about cancer treatment and warrants further study including larger and more diverse groups. Strengths of the study included a theoretical grounding, feasibility testing of a practical clinic-based intervention, and summative evaluation of acceptability of the intervention by patient and supporter pairs. Further research also is needed to test the effectiveness of the decision aid in diverse clinical settings and to determine if this intervention can decrease overall costs.

  10. Developing Novel Reservoir Rule Curves Using Seasonal Inflow Projections

    NASA Astrophysics Data System (ADS)

    Tseng, Hsin-yi; Tung, Ching-pin

    2015-04-01

    Due to significant seasonal rainfall variations, reservoirs and their flexible operational rules are indispensable to Taiwan. Furthermore, with the intensifying impacts of climate change on extreme climate, the frequency of droughts in Taiwan has been increasing in recent years. Drought is a creeping phenomenon, the slow onset character of drought makes it difficult to detect at an early stage, and causes delays on making the best decision of allocating water. For these reasons, novel reservoir rule curves using projected seasonal streamflow are proposed in this study, which can potentially reduce the adverse effects of drought. This study dedicated establishing new rule curves which consider both current available storage and anticipated monthly inflows with leading time of two months to reduce the risk of water shortage. The monthly inflows are projected based on the seasonal climate forecasts from Central Weather Bureau (CWB), which a weather generation model is used to produce daily weather data for the hydrological component of the GWLF. To incorporate future monthly inflow projections into rule curves, this study designs a decision flow index which is a linear combination of current available storage and inflow projections with leading time of 2 months. By optimizing linear relationship coefficients of decision flow index, the shape of rule curves and the percent of water supply in each zone, the best rule curves to decrease water shortage risk and impacts can be developed. The Shimen Reservoir in the northern Taiwan is used as a case study to demonstrate the proposed method. Existing rule curves (M5 curves) of Shimen Reservoir are compared with two cases of new rule curves, including hindcast simulations and historic seasonal forecasts. The results show new rule curves can decrease the total water shortage ratio, and in addition, it can also allocate shortage amount to preceding months to avoid extreme shortage events. Even though some uncertainties in

  11. More Unusual Light Curves from Kepler

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2017-03-01

    -main-sequence stars ever obtained.In these light curves, Stauffer and collaborators found a set of 23 very low-mass, mid-to-late-type M dwarfs with unusual variability in their light curves. The variability is consistent with the stars rotation period where measured which suggests that whatever causes the dips in the light curve, its orbiting at the same rate as the star spins.Causes of Variability?These plots show how the properties of these 23 stars compare to those of the rest of the stars in their cluster (click for a closer look!). For all but the rotation rate, they are typical. But the stars with scallop-shaped light curves have among the shortest periods in Upper Sco, with somenear the theoretical break-up for stars of their age. [Stauffer et al. 2017]The authors categorize the 23 stars into two main groups.The first group consists of 19 stars with short periods; more than half of them rotate within a factor of two of their predicted breakup period! Many of these show sudden changes in their light-curve morphology, often after a stellar flare. The authors propose that the variability in these light curves might be caused by warm coronal gas clouds that are organized into a structured toroidal shape around the star.The second group consists of the remaining four stars, which have slightly longer periods. The light curves show a single short-duration flux dip with highly variable depth and shape superposed on normal, spotted-star light curves. The authors best guess for these four stars is that there are clouds of dusty debris circling the star, possibly orbiting a close-in planet or resulting from a recent collisional event.Stauffer and collaborators are currently developing more detailed models for these stars based on the possible variability scenarios. The next step, they state, is to determine if the gas in these structures have properties necessary to generate the light-curve features we see.CitationJohn Stauffer et al 2017 AJ 153 152. doi:10.3847/1538-3881/aa5eb9

  12. p-Curve and p-Hacking in Observational Research.

    PubMed

    Bruns, Stephan B; Ioannidis, John P A

    2016-01-01

    The p-curve, the distribution of statistically significant p-values of published studies, has been used to make inferences on the proportion of true effects and on the presence of p-hacking in the published literature. We analyze the p-curve for observational research in the presence of p-hacking. We show by means of simulations that even with minimal omitted-variable bias (e.g., unaccounted confounding) p-curves based on true effects and p-curves based on null-effects with p-hacking cannot be reliably distinguished. We also demonstrate this problem using as practical example the evaluation of the effect of malaria prevalence on economic growth between 1960 and 1996. These findings call recent studies into question that use the p-curve to infer that most published research findings are based on true effects in the medical literature and in a wide range of disciplines. p-values in observational research may need to be empirically calibrated to be interpretable with respect to the commonly used significance threshold of 0.05. Violations of randomization in experimental studies may also result in situations where the use of p-curves is similarly unreliable.

  13. p-Curve and p-Hacking in Observational Research

    PubMed Central

    Bruns, Stephan B.; Ioannidis, John P. A.

    2016-01-01

    The p-curve, the distribution of statistically significant p-values of published studies, has been used to make inferences on the proportion of true effects and on the presence of p-hacking in the published literature. We analyze the p-curve for observational research in the presence of p-hacking. We show by means of simulations that even with minimal omitted-variable bias (e.g., unaccounted confounding) p-curves based on true effects and p-curves based on null-effects with p-hacking cannot be reliably distinguished. We also demonstrate this problem using as practical example the evaluation of the effect of malaria prevalence on economic growth between 1960 and 1996. These findings call recent studies into question that use the p-curve to infer that most published research findings are based on true effects in the medical literature and in a wide range of disciplines. p-values in observational research may need to be empirically calibrated to be interpretable with respect to the commonly used significance threshold of 0.05. Violations of randomization in experimental studies may also result in situations where the use of p-curves is similarly unreliable. PMID:26886098

  14. Computer registration of radioactive indicator-dilution curves.

    PubMed

    Shepherd, A P; Perry, M A; Alexander, G M; Granger, D N; Riedel, G L; Kvietys, P R; Franke, C P

    1983-12-01

    A system is described for recording indicator-dilution curves produced by gamma radiation-emitting tracers. The system consists of a flow-through cuvette in a well counter, appropriate commercially available gamma radiation-detecting equipment, an Apple II computer, and a two-channel pulse-counting interface of our own design. With the counting interface and the software described here, an investigator can simultaneously record two indicator-dilution curves produced by gamma emitters. Instead of having to wait hours or days for results, the investigator can watch the data being recorded and display the results in graphic form almost immediately after each injection.

  15. Nonlinear Curve-Fitting Program

    NASA Technical Reports Server (NTRS)

    Everhart, Joel L.; Badavi, Forooz F.

    1989-01-01

    Nonlinear optimization algorithm helps in finding best-fit curve. Nonlinear Curve Fitting Program, NLINEAR, interactive curve-fitting routine based on description of quadratic expansion of X(sup 2) statistic. Utilizes nonlinear optimization algorithm calculating best statistically weighted values of parameters of fitting function and X(sup 2) minimized. Provides user with such statistical information as goodness of fit and estimated values of parameters producing highest degree of correlation between experimental data and mathematical model. Written in FORTRAN 77.

  16. Consumer Acceptance of Dry Dog Food Variations

    PubMed Central

    Donfrancesco, Brizio Di; Koppel, Kadri; Swaney-Stueve, Marianne; Chambers, Edgar

    2014-01-01

    Simple Summary The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Pet owners evaluated dry dog food samples available in the US market. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Abstract The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog’s liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products. PMID:26480043

  17. Streamlines behind curved shock waves in axisymmetric flow fields

    NASA Astrophysics Data System (ADS)

    Filippi, A. A.; Skews, B. W.

    2018-07-01

    Streamlines behind axisymmetric curved shock waves were used to predict the internal surfaces that produced them. Axisymmetric ring wedge models with varying internal radii of curvature and leading-edge angles were used to produce numerical results. Said numerical simulations were validated using experimental shadowgraph results for a series of ring wedge test pieces. The streamlines behind curved shock waves for lower leading-edge angles are examined at Mach 3.4, whereas the highest leading-edge angle cases are explored at Mach 2.8 and 3.4. Numerical and theoretical streamlines are compared for the highest leading-edge angle cases at Mach 3.6. It was found that wall-bounding theoretical streamlines did not match the internal curved surface. This was due to extreme streamline curvature curving the streamlines when the shock angle approached the Mach angle at lower leading-edge angles. Increased Mach number and internal radius of curvature produced more reasonable results. Very good agreement was found between the theoretical and numerical streamlines at lower curvatures before the influence of the trailing edge expansion fan.

  18. Urban stormwater capture curve using three-parameter mixed exponential probability density function and NRCS runoff curve number method.

    PubMed

    Kim, Sangdan; Han, Suhee

    2010-01-01

    Most related literature regarding designing urban non-point-source management systems assumes that precipitation event-depths follow the 1-parameter exponential probability density function to reduce the mathematical complexity of the derivation process. However, the method of expressing the rainfall is the most important factor for analyzing stormwater; thus, a better mathematical expression, which represents the probability distribution of rainfall depths, is suggested in this study. Also, the rainfall-runoff calculation procedure required for deriving a stormwater-capture curve is altered by the U.S. Natural Resources Conservation Service (Washington, D.C.) (NRCS) runoff curve number method to consider the nonlinearity of the rainfall-runoff relation and, at the same time, obtain a more verifiable and representative curve for design when applying it to urban drainage areas with complicated land-use characteristics, such as occurs in Korea. The result of developing the stormwater-capture curve from the rainfall data in Busan, Korea, confirms that the methodology suggested in this study provides a better solution than the pre-existing one.

  19. High pressure melting curve of platinum up to 35 GPa

    NASA Astrophysics Data System (ADS)

    Patel, Nishant N.; Sunder, Meenakshi

    2018-04-01

    Melting curve of Platinum (Pt) has been measured up to 35 GPa using our laboratory based laser heated diamond anvil cell (LHDAC) facility. Laser speckle method has been employed to detect onset of melting. High pressure melting curve of Pt obtained in the present study has been compared with previously reported experimental and theoretical results. The melting curve measured agrees well within experimental error with the results of Kavner et al. The experimental data fitted with simon equation gives (∂Tm/∂P) ˜25 K/GPa at P˜1 MPa.

  20. Simulator evaluation of manually flown curved instrument approaches. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Sager, D.

    1973-01-01

    Pilot performance in flying horizontally curved instrument approaches was analyzed by having nine test subjects fly curved approaches in a fixed-base simulator. Approaches were flown without an autopilot and without a flight director. Evaluations were based on deviation measurements made at a number of points along the curved approach path and on subject questionnaires. Results indicate that pilots can fly curved approaches, though less accurately than straight-in approaches; that a moderate wind does not effect curve flying performance; and that there is no performance difference between 60 deg. and 90 deg. turns. A tradeoff of curve path parameters and a paper analysis of wind compensation were also made.

  1. Acceptance of a Mobile Application Supporting Nurses Workflow at Patient Bedside: Results from a Pilot Study.

    PubMed

    Ehrler, Frederic; Ducloux, Pascal; Wu, Danny T Y; Lovis, Christian; Blondon, Katherine

    2018-01-01

    Supporting caregivers' workflow with mobile applications (apps) is a growing trend. At the bedside, apps can provide new ways to support the documentation process rather than using a desktop computer in a nursing office. Although these applications show potential, few existing reports have studied the real impact of such solutions. At the University Hospitals of Geneva, we developed BEDside Mobility, a mobile application supporting nurses' daily workflow. In a pilot study, the app was trialed in two wards for a period of one month. We collected data of the actual usage of the app and asked the users to complete a tailored technology acceptance model questionnaire at the end of the study period. Results show that participation remain stable with time with participants using in average the tool for almost 29 minutes per day. The technology acceptance questionnaires revealed a high usability of the app and good promotion from the institution although users did not perceive any increase in productivity. Overall, intent of use was divergent between promoters and antagonist. Furthermore, some participants considered the tool as an addition to their workload. This evaluation underlines the importance of helping all end users perceive the benefits of a new intervention since coworkers strong influence each other.

  2. Preliminary Investigation of Curved Liner Sample in the NASA LaRC Curved Duct Test Rig

    NASA Technical Reports Server (NTRS)

    Gerhold, Carl H.; Jones, Michael G.; Brown, Martha C.

    2007-01-01

    This viewgraph presentation reviews the preliminary investigation of the curved liner sample in the NASA LaRC Curved Duct Test Rig (CDTR). It reviews the purpose of the Curved Duct Test Rig. Its purpose is to develop capability to investigate acoustic and aerodynamic properties in ducts. It has several features to accomplish that purpose: (1) Large scale (2) Flow rate to M = 0.275 (3) Higher order mode control (4) Curved flow path (5) Adaptable test section (6) Flexible test configurations. The liner has minimal effect on turbulence or boundary layer growth in duct. The curved duct sample attenuation is affected by mode scattering. In conclusion, the CDTR is valid tool for aerodynamic and acoustic evaluation of duct treatment

  3. Adaptive zero-tree structure for curved wavelet image coding

    NASA Astrophysics Data System (ADS)

    Zhang, Liang; Wang, Demin; Vincent, André

    2006-02-01

    We investigate the issue of efficient data organization and representation of the curved wavelet coefficients [curved wavelet transform (WT)]. We present an adaptive zero-tree structure that exploits the cross-subband similarity of the curved wavelet transform. In the embedded zero-tree wavelet (EZW) and the set partitioning in hierarchical trees (SPIHT), the parent-child relationship is defined in such a way that a parent has four children, restricted to a square of 2×2 pixels, the parent-child relationship in the adaptive zero-tree structure varies according to the curves along which the curved WT is performed. Five child patterns were determined based on different combinations of curve orientation. A new image coder was then developed based on this adaptive zero-tree structure and the set-partitioning technique. Experimental results using synthetic and natural images showed the effectiveness of the proposed adaptive zero-tree structure for encoding of the curved wavelet coefficients. The coding gain of the proposed coder can be up to 1.2 dB in terms of peak SNR (PSNR) compared to the SPIHT coder. Subjective evaluation shows that the proposed coder preserves lines and edges better than the SPIHT coder.

  4. Characterizing time series via complexity-entropy curves

    NASA Astrophysics Data System (ADS)

    Ribeiro, Haroldo V.; Jauregui, Max; Zunino, Luciano; Lenzi, Ervin K.

    2017-06-01

    The search for patterns in time series is a very common task when dealing with complex systems. This is usually accomplished by employing a complexity measure such as entropies and fractal dimensions. However, such measures usually only capture a single aspect of the system dynamics. Here, we propose a family of complexity measures for time series based on a generalization of the complexity-entropy causality plane. By replacing the Shannon entropy by a monoparametric entropy (Tsallis q entropy) and after considering the proper generalization of the statistical complexity (q complexity), we build up a parametric curve (the q -complexity-entropy curve) that is used for characterizing and classifying time series. Based on simple exact results and numerical simulations of stochastic processes, we show that these curves can distinguish among different long-range, short-range, and oscillating correlated behaviors. Also, we verify that simulated chaotic and stochastic time series can be distinguished based on whether these curves are open or closed. We further test this technique in experimental scenarios related to chaotic laser intensity, stock price, sunspot, and geomagnetic dynamics, confirming its usefulness. Finally, we prove that these curves enhance the automatic classification of time series with long-range correlations and interbeat intervals of healthy subjects and patients with heart disease.

  5. Patient acceptance of awake craniotomy.

    PubMed

    Wrede, Karsten H; Stieglitz, Lennart H; Fiferna, Antje; Karst, Matthias; Gerganov, Venelin M; Samii, Madjid; von Gösseln, Hans-Henning; Lüdemann, Wolf O

    2011-12-01

    The aim of this study was to objectively assess the patients' acceptance for awake craniotomy in a group of neurosurgical patients, who underwent this procedure for removal of lesions in or close to eloquent brain areas. Patients acceptance for awake craniotomy under local anesthesia and conscious sedation was assessed by a formal questionnaire (PPP33), initially developed for general surgery patients. The results are compared to a group of patients who had brain surgery under general anesthesia and to previously published data. The awake craniotomy (AC) group consisted of 37 male and 9 female patients (48 craniotomies) with age ranging from 18 to 71 years. The general anesthesia (GA) group consisted of 26 male and 15 female patients (43 craniotomies) with age ranging from 26 to 83 years. All patients in the study were included in the questionnaire analysis. In comparison to GA the overall PPP33 score for AC was higher (p=0.07), suggesting better overall acceptance for AC. The subscale scores for AC were also significantly better compared to GA for the two subscales "postoperative pain" (p=0.02) and "physical disorders" (p=0.01) and equal for the other 6 subscales. The results of the overall mean score and the scores for the subscales of the PPP33 questionnaire verify good patients' acceptance for AC. Previous studies have shown good patients' acceptance for awake craniotomy, but only a few times using formal approaches. By utilizing a formal questionnaire we could verify good patient acceptance for awake craniotomy for the treatment of brain tumors in or close to eloquent areas. This is a novel approach that substantiates previously published experiences. Copyright © 2011 Elsevier B.V. All rights reserved.

  6. Smooth time-dependent receiver operating characteristic curve estimators.

    PubMed

    Martínez-Camblor, Pablo; Pardo-Fernández, Juan Carlos

    2018-03-01

    The receiver operating characteristic curve is a popular graphical method often used to study the diagnostic capacity of continuous (bio)markers. When the considered outcome is a time-dependent variable, two main extensions have been proposed: the cumulative/dynamic receiver operating characteristic curve and the incident/dynamic receiver operating characteristic curve. In both cases, the main problem for developing appropriate estimators is the estimation of the joint distribution of the variables time-to-event and marker. As usual, different approximations lead to different estimators. In this article, the authors explore the use of a bivariate kernel density estimator which accounts for censored observations in the sample and produces smooth estimators of the time-dependent receiver operating characteristic curves. The performance of the resulting cumulative/dynamic and incident/dynamic receiver operating characteristic curves is studied by means of Monte Carlo simulations. Additionally, the influence of the choice of the required smoothing parameters is explored. Finally, two real-applications are considered. An R package is also provided as a complement to this article.

  7. Multiple curved descending approaches and the air traffic control problem

    NASA Technical Reports Server (NTRS)

    Hart, S. G.; Mcpherson, D.; Kreifeldt, J.; Wemple, T. E.

    1977-01-01

    A terminal area air traffic control simulation was designed to study ways of accommodating increased air traffic density. The concepts that were investigated assumed the availability of the microwave landing system and data link and included: (1) multiple curved descending final approaches; (2) parallel runways certified for independent and simultaneous operation under IFR conditions; (3) closer spacing between successive aircraft; and (4) a distributed management system between the air and ground. Three groups each consisting of three pilots and two air traffic controllers flew a combined total of 350 approaches. Piloted simulators were supplied with computer generated traffic situation displays and flight instruments. The controllers were supplied with a terminal area map and digital status information. Pilots and controllers also reported that the distributed management procedure was somewhat more safe and orderly than the centralized management procedure. Flying precision increased as the amount of turn required to intersect the outer mark decreased. Pilots reported that they preferred the alternative of multiple curved descending approaches with wider spacing between aircraft to closer spacing on single, straight in finals while controllers preferred the latter option. Both pilots and controllers felt that parallel runways are an acceptable way to accommodate increased traffic density safely and expeditiously.

  8. Evaluation of the Acceptance of Audience Response System by Corporations Using the Technology Acceptance Model

    NASA Astrophysics Data System (ADS)

    Chu, Hsing-Hui; Lu, Ta-Jung; Wann, Jong-Wen

    The purpose of this research is to explore enterprises' acceptance of Audience Response System (ARS) using Technology Acceptance Model (TAM). The findings show that (1) IT characteristics and facilitating conditions could be external variables of TAM. (2) The degree of E-business has positive significant correlation with behavioral intention of employees. (3) TAM is a good model to predict and explain IT acceptance. (4) Demographic variables, industry and firm characteristics have no significant correlation with ARS acceptance. The results provide useful information to managers and ARS providers that (1) ARS providers should focus more on creating different usages to enhance interactivity and employees' using intention. (2) Managers should pay attention to build sound internal facilitating conditions for introducing IT. (3) According to the degree of E-business, managers should set up strategic stages of introducing IT. (4) Providers should increase product promotion and also leverage academic and government to promote ARS.

  9. Acceptability of GM foods among Pakistani consumers.

    PubMed

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-04-02

    In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers.

  10. Acceptability of GM foods among Pakistani consumers

    PubMed Central

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-01-01

    ABSTRACT In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers. PMID:27494790

  11. EXPERIMENTAL MEASUREMENT AND INTERPRETATION OF VOLT-AMPERE CURVES

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gingrich, J.E.; Warner, C.; Weeks, C.C.

    1962-07-01

    Cylindrical and parallel-plane cesium vapor thermionic converters were used for obtaining volt-ampere curves for systematic variations of emitter, collector, and cesium reservoir temperatures, with electrode spacings ranging from a few to many mean free paths, and with space charge conditions varying from electron-rich to ion-rich. The resulting curves exhibit much variety. The saturation currents agree well with the data of Houston and Aamodt for the space charge neutralized, few-mean-free-path cases. Apparent'' saturation currents for space charge limited cases were observed and were always less than the currents predicted by Houston and Aamodt. Several discontinuities in slope were observed in themore » reverse current portion of the curves and these have tentatively been identified with volume ionization of atoms in both the ground and excited states. Similar processes may be important for obtaining the ignited mode. The methods used to measure static and dynamic volt-ampere curves are described. The use of a controlled-current load has yielded a negative resistance'' region in the curves which show the ignited mode. The curves obtained with poor current control do not show this phenomenon. Extinction is considered from the standpoint of Kaufmann' s criterion for stability. (auth)« less

  12. Exploring the optimum step size for defocus curves.

    PubMed

    Wolffsohn, James S; Jinabhai, Amit N; Kingsnorth, Alec; Sheppard, Amy L; Naroo, Shehzad A; Shah, Sunil; Buckhurst, Phillip; Hall, Lee A; Young, Graeme

    2013-06-01

    To evaluate the effect of reducing the number of visual acuity measurements made in a defocus curve on the quality of data quantified. Midland Eye, Solihull, United Kingdom. Evaluation of a technique. Defocus curves were constructed by measuring visual acuity on a distance logMAR letter chart, randomizing the test letters between lens presentations. The lens powers evaluated ranged between +1.50 diopters (D) and -5.00 D in 0.50 D steps, which were also presented in a randomized order. Defocus curves were measured binocularly with the Tecnis diffractive, Rezoom refractive, Lentis rotationally asymmetric segmented (+3.00 D addition [add]), and Finevision trifocal multifocal intraocular lenses (IOLs) implanted bilaterally, and also for the diffractive IOL and refractive or rotationally asymmetric segmented (+3.00 D and +1.50 D adds) multifocal IOLs implanted contralaterally. Relative and absolute range of clear-focus metrics and area metrics were calculated for curves fitted using 0.50 D, 1.00 D, and 1.50 D steps and a near add-specific profile (ie, distance, half the near add, and the full near-add powers). A significant difference in simulated results was found in at least 1 of the relative or absolute range of clear-focus or area metrics for each of the multifocal designs examined when the defocus-curve step size was increased (P<.05). Faster methods of capturing defocus curves from multifocal IOL designs appear to distort the metric results and are therefore not valid. No author has a financial or proprietary interest in any material or method mentioned. Copyright © 2013 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  13. Colorectal endoscopic submucosal dissection (ESD) in the West - when can satisfactory results be obtained? A single-operator learning curve analysis.

    PubMed

    Spychalski, Michał; Skulimowski, Aleksander; Dziki, Adam; Saito, Yutaka

    2017-12-01

    Up to date we lack a detailed description of the colorectal endoscopic submucosal dissection (ESD) learning curve, that would represent the experience of the Western center. The aim of this study was to define the critical points of the learning curve and to draw up lesions qualification guidelines tailored to the endoscopists experience. We have carried out a single center prospective study. Between June 2013 and December 2016, 228 primary colorectal lesions were managed by ESD procedure. In order to create a learning curve model and to carry out the analysis the cases were divided into six periods, each consisting of 38 cases. The overall en bloc resection rate was 79.39%. The lowest en bloc resection rate (52.36%) was observed in the first period. After completing 76 procedures, the resection rate surged to 86% and it was accompanied by the significant increase in the mean procedure speed of ≥9 cm 2 /h. Lesions localization and diameter had a signification impact on the outcomes. After 76 procedures, en bloc resection rate of 90.9 and 90.67% were achieved for the left side of colon and rectum, respectively. In the right side of colon statistically significant lower resection rate of 67.57% was observed. We have proved that in the setting of the Western center, colorectal ESD can yield excellent results. It seems that the key to the success during the learning period is 'tailoring' lesions qualification guidelines to the experience of the endoscopist, as lesions diameter and localization highly influence the outcomes.

  14. Nested taxa-area curves for eastern United States floras

    USGS Publications Warehouse

    Bennett, J.P.

    1997-01-01

    The slopes of log-log species-area curves have been studied extensively and found to be influenced by the range of areas under study. Two such studies of eastern United States floras have yielded species-area curve slopes which differ by more than 100%: 0.251 and 0.113. The first slope may be too steep because the flora of the world was included, and both may be too steep because noncontiguous areas were used. These two hypotheses were tested using a set of nested floras centered in Ohio and continuing up to the flora of the world. The results suggest that this set of eastern United States floras produces a log-log species-area curve with a slope of approximately 0.20 with the flora of the world excluded, and regardless of whether or not the floras are from nested areas. Genera- and family-area curves are less steep than species-area curves and show similar patterns. Taxa ratio curves also increase with area, with the species/family ratio showing the steepest slope.

  15. [The results of an active screening program for tuberculosis in immigrants from the Maghreb: acceptability and adherence].

    PubMed

    Rivas-Clemente, F P; Nácher-Conches, M; Corrillero-Martín, J; Vélez-Reyes, S; Huerta-Galindo, L

    1999-10-31

    To assess acceptability and adherence to a tuberculosis screening programme (TSP) in Maghrebi immigrants (MI). A descriptive crossover study. Primary health care service. MI residing in a periurban health district. All people who attended clinic for consultation at a primary care center were systematically recommended to be screened for tuberculosis. Individuals accomplished a questionnaire in arabic (with interpreter assistance) and were subjected to tuberculosis infection/illness screening tests till they were assigned one of the definitive diagnostic classes of the American Thoracic Society. 219 individuals were offered the TSP (sex ratio 6.2:1). 166 individuals (76.1%) accepted the test and kept their first appointment: 147 males (78.2%) versus 19 females (63.3%); difference in acceptance by gender was not significant (chi 2 = 3.14; p = 0.07). Fourteen individuals did not complete the study (8.6%): one did not attend clinic for Mantoux reading, four did not have the chest X-ray, three did not present themselves on their Mantoux reading, nor did they have the chest X-ray and, six did not deliver sputum samples (11.1% of the required samples). Six cases of TB were diagnosed. Given the special features of the MI (communication difficulties, illegal status, no fixed abode ...) acceptance and adherence to TSP are considered to be high. The diagnostic effectiveness, though considerable, was affected by the high number of individuals which did not deliver sputum samples. TSP directed to MI must have a specific design in order to facilitate acceptance and adherence.

  16. W-curve alignments for HIV-1 genomic comparisons.

    PubMed

    Cork, Douglas J; Lembark, Steven; Tovanabutra, Sodsai; Robb, Merlin L; Kim, Jerome H

    2010-06-01

    The W-curve was originally developed as a graphical visualization technique for viewing DNA and RNA sequences. Its ability to render features of DNA also makes it suitable for computational studies. Its main advantage in this area is utilizing a single-pass algorithm for comparing the sequences. Avoiding recursion during sequence alignments offers advantages for speed and in-process resources. The graphical technique also allows for multiple models of comparison to be used depending on the nucleotide patterns embedded in similar whole genomic sequences. The W-curve approach allows us to compare large numbers of samples quickly. We are currently tuning the algorithm to accommodate quirks specific to HIV-1 genomic sequences so that it can be used to aid in diagnostic and vaccine efforts. Tracking the molecular evolution of the virus has been greatly hampered by gap associated problems predominantly embedded within the envelope gene of the virus. Gaps and hypermutation of the virus slow conventional string based alignments of the whole genome. This paper describes the W-curve algorithm itself, and how we have adapted it for comparison of similar HIV-1 genomes. A treebuilding method is developed with the W-curve that utilizes a novel Cylindrical Coordinate distance method and gap analysis method. HIV-1 C2-V5 env sequence regions from a Mother/Infant cohort study are used in the comparison. The output distance matrix and neighbor results produced by the W-curve are functionally equivalent to those from Clustal for C2-V5 sequences in the mother/infant pairs infected with CRF01_AE. Significant potential exists for utilizing this method in place of conventional string based alignment of HIV-1 genomes, such as Clustal X. With W-curve heuristic alignment, it may be possible to obtain clinically useful results in a short time-short enough to affect clinical choices for acute treatment. A description of the W-curve generation process, including a comparison technique of

  17. Titration Curves: Fact and Fiction.

    ERIC Educational Resources Information Center

    Chamberlain, John

    1997-01-01

    Discusses ways in which datalogging equipment can enable titration curves to be measured accurately and how computing power can be used to predict the shape of curves. Highlights include sources of error, use of spreadsheets to generate titration curves, titration of a weak acid with a strong alkali, dibasic acids, weak acid and weak base, and…

  18. Axisymmetric indentation of curved elastic membranes by a convex rigid indenter

    PubMed Central

    Pearce, S.P.; King, J.R.; Holdsworth, M.J.

    2011-01-01

    Motivated by applications to seed germination, we consider the transverse deflection that results from the axisymmetric indentation of an elastic membrane by a rigid body. The elastic membrane is fixed around its boundary, with or without an initial pre-stretch, and may be initially curved prior to indentation. General indenter shapes are considered, and the load–indentation curves that result for a range of spheroidal tips are obtained for both flat and curved membranes. Wrinkling may occur when the membrane is initially curved, and a relaxed strain-energy function is used to calculate the deformed profile in this case. Applications to experiments designed to measure the mechanical properties of seed endosperms are discussed. PMID:22298913

  19. [Customized and non-customized French intrauterine growth curves. II - Comparison with existing curves and benefits of customization].

    PubMed

    Ego, A; Prunet, C; Blondel, B; Kaminski, M; Goffinet, F; Zeitlin, J

    2016-02-01

    Our aim is to compare the new French EPOPé intrauterine growth curves, developed to address the guidelines 2013 of the French College of Obstetricians and Gynecologists, with reference curves currently used in France, and to evaluate the consequences of their adjustment for fetal sex and maternal characteristics. Eight intrauterine and birthweight curves, used in France were compared to the EPOPé curves using data from the French Perinatal Survey 2010. The influence of adjustment on the rate of SGA births and the characteristics of these births was analysed. Due to their birthweight values and distribution, the selected intrauterine curves are less suitable for births in France than the new curves. Birthweight curves led to low rates of SGA births from 4.3 to 8.5% compared to 10.0% with the EPOPé curves. The adjustment for maternal and fetal characteristics avoids the over-representation of girls among SGA births, and reclassifies 4% of births. Among births reclassified as SGA, the frequency of medical and obstetrical risk factors for growth restriction, smoking (≥10 cigarettes/day), and neonatal transfer is higher than among non-SGA births (P<0.01). The EPOPé curves are more suitable for French births than currently used curves, and their adjustment improves the identification of mothers and babies at risk of growth restriction and poor perinatal outcomes. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  20. Fitting the curve in Excel®: Systematic curve fitting of laboratory and remotely sensed planetary spectra

    NASA Astrophysics Data System (ADS)

    McCraig, Michael A.; Osinski, Gordon R.; Cloutis, Edward A.; Flemming, Roberta L.; Izawa, Matthew R. M.; Reddy, Vishnu; Fieber-Beyer, Sherry K.; Pompilio, Loredana; van der Meer, Freek; Berger, Jeffrey A.; Bramble, Michael S.; Applin, Daniel M.

    2017-03-01

    Spectroscopy in planetary science often provides the only information regarding the compositional and mineralogical make up of planetary surfaces. The methods employed when curve fitting and modelling spectra can be confusing and difficult to visualize and comprehend. Researchers who are new to working with spectra may find inadequate help or documentation in the scientific literature or in the software packages available for curve fitting. This problem also extends to the parameterization of spectra and the dissemination of derived metrics. Often, when derived metrics are reported, such as band centres, the discussion of exactly how the metrics were derived, or if there was any systematic curve fitting performed, is not included. Herein we provide both recommendations and methods for curve fitting and explanations of the terms and methods used. Techniques to curve fit spectral data of various types are demonstrated using simple-to-understand mathematics and equations written to be used in Microsoft Excel® software, free of macros, in a cut-and-paste fashion that allows one to curve fit spectra in a reasonably user-friendly manner. The procedures use empirical curve fitting, include visualizations, and ameliorates many of the unknowns one may encounter when using black-box commercial software. The provided framework is a comprehensive record of the curve fitting parameters used, the derived metrics, and is intended to be an example of a format for dissemination when curve fitting data.

  1. On curve veering and flutter of rotating blades

    NASA Technical Reports Server (NTRS)

    Afolabi, Dare; Mehmed, Oral

    1993-01-01

    The eigenvalues of rotating blades usually change with rotation speed according to the Stodola-Southwell criterion. Under certain circumstances, the loci of eigenvalues belonging to two distinct modes of vibration approach each other very closely, and it may appear as if the loci cross each other. However, our study indicates that the observable frequency loci of an undamped rotating blade do not cross, but must either repel each other (leading to 'curve veering'), or attract each other (leading to 'frequency coalescence'). Our results are reached by using standard arguments from algebraic geometry--the theory of algebraic curves and catastrophe theory. We conclude that it is important to resolve an apparent crossing of eigenvalue loci into either a frequency coalescence or a curve veering, because frequency coalescence is dangerous since it leads to flutter, whereas curve veering does not precipitate flutter and is, therefore, harmless with respect to elastic stability.

  2. Research on conformal dome of Karman-curve shape

    NASA Astrophysics Data System (ADS)

    Zhang, Yunqiang; Chang, Jun; Niu, Yajun

    2018-01-01

    Because the conformal optical technology can obviously improve the aerodynamic performance of the infrared guidance missile, it has been studied deeply in recent years. By comparing the performance of the missiles with conformal dome and conventional missiles, the advantages of the conformal optical technology are demonstrated in the maneuverability and stealth of the missile. At present, the study of conformal optical systems focuses on ellipsoid or quadratic curve types. But in actual use, the dome using these curves is not the best choice. In this paper, the influence of different shape of the dome on aerodynamic performance, aerodynamic heating, internal space volume and other properties is discussed. The result shows infrared optical system with conformal dome of Karman-curve shape has a good application prospect, is the future direction of development. Finally, the difficult problems of conformal dome of Karman-curve shape are discussed.

  3. Derivation of a Provisional, Age-dependent, AIS2+ Thoracic Risk Curve for the THOR50 Test Dummy via Integration of NASS Cases, PMHS Tests, and Simulation Data.

    PubMed

    Laituri, Tony R; Henry, Scott; El-Jawahri, Raed; Muralidharan, Nirmal; Li, Guosong; Nutt, Marvin

    2015-11-01

    A provisional, age-dependent thoracic risk equation (or, "risk curve") was derived to estimate moderate-to-fatal injury potential (AIS2+), pertaining to men with responses gaged by the advanced mid-sized male test dummy (THOR50). The derivation involved two distinct data sources: cases from real-world crashes (e.g., the National Automotive Sampling System, NASS) and cases involving post-mortem human subjects (PMHS). The derivation was therefore more comprehensive, as NASS datasets generally skew towards younger occupants, and PMHS datasets generally skew towards older occupants. However, known deficiencies had to be addressed (e.g., the NASS cases had unknown stimuli, and the PMHS tests required transformation of known stimuli into THOR50 stimuli). For the NASS portion of the analysis, chest-injury outcomes for adult male drivers about the size of the THOR50 were collected from real-world, 11-1 o'clock, full-engagement frontal crashes (NASS, 1995-2012 calendar years, 1985-2012 model-year light passenger vehicles). The screening for THOR50-sized men involved application of a set of newly-derived "correction" equations for self-reported height and weight data in NASS. Finally, THOR50 stimuli were estimated via field simulations involving attendant representative restraint systems, and those stimuli were then assigned to corresponding NASS cases (n=508). For the PMHS portion of the analysis, simulation-based closure equations were developed to convert PMHS stimuli into THOR50 stimuli. Specifically, closure equations were derived for the four measurement locations on the THOR50 chest by cross-correlating the results of matched-loading simulations between the test dummy and the age-dependent, Ford Human Body Model. The resulting closure equations demonstrated acceptable fidelity (n=75 matched simulations, R2≥0.99). These equations were applied to the THOR50-sized men in the PMHS dataset (n=20). The NASS and PMHS datasets were combined and subjected to survival

  4. Rayleigh wave dispersion curve inversion by using particle swarm optimization and genetic algorithm

    NASA Astrophysics Data System (ADS)

    Buyuk, Ersin; Zor, Ekrem; Karaman, Abdullah

    2017-04-01

    Inversion of surface wave dispersion curves with its highly nonlinear nature has some difficulties using traditional linear inverse methods due to the need and strong dependence to the initial model, possibility of trapping in local minima and evaluation of partial derivatives. There are some modern global optimization methods to overcome of these difficulties in surface wave analysis such as Genetic algorithm (GA) and Particle Swarm Optimization (PSO). GA is based on biologic evolution consisting reproduction, crossover and mutation operations, while PSO algorithm developed after GA is inspired from the social behaviour of birds or fish of swarms. Utility of these methods require plausible convergence rate, acceptable relative error and optimum computation cost that are important for modelling studies. Even though PSO and GA processes are similar in appearence, the cross-over operation in GA is not used in PSO and the mutation operation is a stochastic process for changing the genes within chromosomes in GA. Unlike GA, the particles in PSO algorithm changes their position with logical velocities according to particle's own experience and swarm's experience. In this study, we applied PSO algorithm to estimate S wave velocities and thicknesses of the layered earth model by using Rayleigh wave dispersion curve and also compared these results with GA and we emphasize on the advantage of using PSO algorithm for geophysical modelling studies considering its rapid convergence, low misfit error and computation cost.

  5. Can hydraulic-modelled rating curves reduce uncertainty in high flow data?

    NASA Astrophysics Data System (ADS)

    Westerberg, Ida; Lam, Norris; Lyon, Steve W.

    2017-04-01

    Flood risk assessments rely on accurate discharge data records. Establishing a reliable rating curve for calculating discharge from stage at a gauging station normally takes years of data collection efforts. Estimation of high flows is particularly difficult as high flows occur rarely and are often practically difficult to gauge. Hydraulically-modelled rating curves can be derived based on as few as two concurrent stage-discharge and water-surface slope measurements at different flow conditions. This means that a reliable rating curve can, potentially, be derived much faster than a traditional rating curve based on numerous stage-discharge gaugings. In this study we compared the uncertainty in discharge data that resulted from these two rating curve modelling approaches. We applied both methods to a Swedish catchment, accounting for uncertainties in the stage-discharge gauging and water-surface slope data for the hydraulic model and in the stage-discharge gauging data and rating-curve parameters for the traditional method. We focused our analyses on high-flow uncertainty and the factors that could reduce this uncertainty. In particular, we investigated which data uncertainties were most important, and at what flow conditions the gaugings should preferably be taken. First results show that the hydraulically-modelled rating curves were more sensitive to uncertainties in the calibration measurements of discharge than water surface slope. The uncertainty of the hydraulically-modelled rating curves were lowest within the range of the three calibration stage-discharge gaugings (i.e. between median and two-times median flow) whereas uncertainties were higher outside of this range. For instance, at the highest observed stage of the 24-year stage record, the 90% uncertainty band was -15% to +40% of the official rating curve. Additional gaugings at high flows (i.e. four to five times median flow) would likely substantially reduce those uncertainties. These first results show

  6. Better P-curves: Making P-curve analysis more robust to errors, fraud, and ambitious P-hacking, a Reply to Ulrich and Miller (2015).

    PubMed

    Simonsohn, Uri; Simmons, Joseph P; Nelson, Leif D

    2015-12-01

    When studies examine true effects, they generate right-skewed p-curves, distributions of statistically significant results with more low (.01 s) than high (.04 s) p values. What else can cause a right-skewed p-curve? First, we consider the possibility that researchers report only the smallest significant p value (as conjectured by Ulrich & Miller, 2015), concluding that it is a very uncommon problem. We then consider more common problems, including (a) p-curvers selecting the wrong p values, (b) fake data, (c) honest errors, and (d) ambitiously p-hacked (beyond p < .05) results. We evaluate the impact of these common problems on the validity of p-curve analysis, and provide practical solutions that substantially increase its robustness. (c) 2015 APA, all rights reserved).

  7. The learning curve of robot-assisted laparoscopic aortofemoral bypass grafting for aortoiliac occlusive disease.

    PubMed

    Novotný, Tomáš; Dvorák, Martin; Staffa, Robert

    2011-02-01

    Since the end of the 20th century, robot-assisted surgery has been finding its role among other minimally invasive methods. Vascular surgery seems to be another specialty in which the benefits of this technology can be expected. Our objective was to assess the learning curve of robot-assisted laparoscopic aortofemoral bypass grafting for aortoiliac occlusive disease in a group of 40 patients. Between May 2006 and January 2010, 40 patients (32 men, 8 women), who were a median age of 58 years (range, 48-75 years), underwent 40 robot-assisted laparoscopic aortofemoral reconstructions. Learning curve estimations were used for anastomosis, clamping, and operative time assessment. For conversion rate evaluation, the cumulative summation (CUSUM) technique was used. Statistical analysis comparing the first and second half of our group, and unilateral-to-bilateral reconstructions were performed. We created 21 aortofemoral and 19 aortobifemoral bypasses. The median proximal anastomosis time was 23 minutes (range, 18-50 minutes), median clamping time was 60 minutes (range, 40-95 minutes), and median operative time was 295 minutes (range, 180-475 minutes). The 30-day mortality rate was 0%, and no graft or wound infection or cardiopulmonary or hepatorenal complications were observed. During the median 18-month follow-up (range, 2-48 months), three early graft occlusions occurred (7%). After reoperations, the secondary patency of reconstructions was 100%. Data showed a typical short learning curve for robotic proximal anastomosis creation with anastomosis and clamping time reduction. The operative time learning curve was flat, confirming the procedure's complexity. There were two conversions to open surgery. CUSUM analysis confirmed that an acceptable conversion rate set at 5% was achieved. Comparing the first and second half of our group, all recorded times showed statistically significant improvements. Differences between unilateral and bilateral reconstructions were not

  8. Decision curve analysis revisited: overall net benefit, relationships to ROC curve analysis, and application to case-control studies

    PubMed Central

    2011-01-01

    Background Decision curve analysis has been introduced as a method to evaluate prediction models in terms of their clinical consequences if used for a binary classification of subjects into a group who should and into a group who should not be treated. The key concept for this type of evaluation is the "net benefit", a concept borrowed from utility theory. Methods We recall the foundations of decision curve analysis and discuss some new aspects. First, we stress the formal distinction between the net benefit for the treated and for the untreated and define the concept of the "overall net benefit". Next, we revisit the important distinction between the concept of accuracy, as typically assessed using the Youden index and a receiver operating characteristic (ROC) analysis, and the concept of utility of a prediction model, as assessed using decision curve analysis. Finally, we provide an explicit implementation of decision curve analysis to be applied in the context of case-control studies. Results We show that the overall net benefit, which combines the net benefit for the treated and the untreated, is a natural alternative to the benefit achieved by a model, being invariant with respect to the coding of the outcome, and conveying a more comprehensive picture of the situation. Further, within the framework of decision curve analysis, we illustrate the important difference between the accuracy and the utility of a model, demonstrating how poor an accurate model may be in terms of its net benefit. Eventually, we expose that the application of decision curve analysis to case-control studies, where an accurate estimate of the true prevalence of a disease cannot be obtained from the data, is achieved with a few modifications to the original calculation procedure. Conclusions We present several interrelated extensions to decision curve analysis that will both facilitate its interpretation and broaden its potential area of application. PMID:21696604

  9. Multiple Optical Traps with a Single-Beam Optical Tweezer Utilizing Surface Micromachined Planar Curved Grating

    NASA Astrophysics Data System (ADS)

    Kuo, Ju-Nan; Chen, Kuan-Yu

    2010-11-01

    In this paper, we present a single-beam optical tweezer integrated with a planar curved diffraction grating for microbead manipulation. Various curvatures of the surface micromachined planar curved grating are systematically investigated. The planar curved grating was fabricated using multiuser micro-electro-mechanical-system (MEMS) processes (MUMPs). The angular separation and the number of diffracted orders were determined. Experimental results indicate that the diffraction patterns and curvature of the planar curved grating are closely related. As the curvature of the planar curved grating increases, the vertical diffraction angle increases, resulting in the strip patterns of the planar curved grating. A single-beam optical tweezer integrated with a planar curved diffraction grating was developed. We demonstrate a technique for creating multiple optical traps from a single laser beam using the developed planar curved grating. The strip patterns of the planar curved grating that resulted from diffraction were used to trap one row of polystyrene beads.

  10. Langevin Equation on Fractal Curves

    NASA Astrophysics Data System (ADS)

    Satin, Seema; Gangal, A. D.

    2016-07-01

    We analyze random motion of a particle on a fractal curve, using Langevin approach. This involves defining a new velocity in terms of mass of the fractal curve, as defined in recent work. The geometry of the fractal curve, plays an important role in this analysis. A Langevin equation with a particular model of noise is proposed and solved using techniques of the Fα-Calculus.

  11. Urgent and Elective Robotic Single-Site Cholecystectomy: Analysis and Learning Curve of 150 Consecutive Cases.

    PubMed

    Kubat, Eric; Hansen, Nathan; Nguyen, Huy; Wren, Sherry M; Eisenberg, Dan

    2016-03-01

    The use of robotic single-site cholecystectomy has increased exponentially. There are few reports describing the safety, efficacy, and operative learning curve of robotic single-site cholecystectomy either in the community setting or with nonelective surgery. We performed a retrospective review of a prospective database of our initial experience with robotic single-site cholecystectomy. Demographics and perioperative outcomes were evaluated for both urgent and elective cholecystectomy. Cumulative sum analysis was performed to determine the surgeon's learning curve. One hundred fifty patients underwent robotic single-site cholecystectomy. Seventy-four (49.3%) patients underwent urgent robotic single-site cholecystectomy, and 76 (50.7%) underwent elective robotic single-site cholecystectomy. Mean total operative time for robotic single-site cholecystectomy was 83.3 ± 2.7 minutes. Mean operative time for the urgent cohort was significantly longer than for the elective cohort (95.0 ± 4.4 versus 71.9 ± 2.6 minutes; P < .001). There was one conversion in the urgent cohort and none in the elective cohort. There was one bile duct injury (0.7%) in the urgent cohort. Perioperative complications occurred in 8.7% of patients, and most consisted of superficial surgical-site infections. There were no incisional hernias detected. The surgeon's learning curve, inclusive of urgent and elective cases, was 48 operations. Robotic single-site cholecystectomy can be performed safely and effectively in both elective and urgent cholecystectomy with a reasonable learning curve and acceptable perioperative outcomes.

  12. Nongaussian distribution curve of heterophorias among children.

    PubMed

    Letourneau, J E; Giroux, R

    1991-02-01

    The purpose of this study was to measure the distribution curve of horizontal and vertical phorias among children. Kolmogorov-Smirnov goodness of fit tests showed that these distribution curves were not Gaussian among (N = 2048) 6- to 13-year-old children. The distribution curve of horizontal phoria at far and of vertical phorias at far and at near were leptokurtic; the distribution curve of horizontal phoria at near was platykurtic. No variation of the distribution curve of heterophorias with age was observed. Comparisons of any individual findings with the general distribution curve should take the nonGaussian distribution curve of heterophorias into account.

  13. Interaction Analysis of Longevity Interventions Using Survival Curves.

    PubMed

    Nowak, Stefan; Neidhart, Johannes; Szendro, Ivan G; Rzezonka, Jonas; Marathe, Rahul; Krug, Joachim

    2018-01-06

    A long-standing problem in ageing research is to understand how different factors contributing to longevity should be expected to act in combination under the assumption that they are independent. Standard interaction analysis compares the extension of mean lifespan achieved by a combination of interventions to the prediction under an additive or multiplicative null model, but neither model is fundamentally justified. Moreover, the target of longevity interventions is not mean life span but the entire survival curve. Here we formulate a mathematical approach for predicting the survival curve resulting from a combination of two independent interventions based on the survival curves of the individual treatments, and quantify interaction between interventions as the deviation from this prediction. We test the method on a published data set comprising survival curves for all combinations of four different longevity interventions in Caenorhabditis elegans . We find that interactions are generally weak even when the standard analysis indicates otherwise.

  14. Interaction Analysis of Longevity Interventions Using Survival Curves

    PubMed Central

    Nowak, Stefan; Neidhart, Johannes; Szendro, Ivan G.; Rzezonka, Jonas; Marathe, Rahul; Krug, Joachim

    2018-01-01

    A long-standing problem in ageing research is to understand how different factors contributing to longevity should be expected to act in combination under the assumption that they are independent. Standard interaction analysis compares the extension of mean lifespan achieved by a combination of interventions to the prediction under an additive or multiplicative null model, but neither model is fundamentally justified. Moreover, the target of longevity interventions is not mean life span but the entire survival curve. Here we formulate a mathematical approach for predicting the survival curve resulting from a combination of two independent interventions based on the survival curves of the individual treatments, and quantify interaction between interventions as the deviation from this prediction. We test the method on a published data set comprising survival curves for all combinations of four different longevity interventions in Caenorhabditis elegans. We find that interactions are generally weak even when the standard analysis indicates otherwise. PMID:29316622

  15. Reconstructing the Geomagnetic Field in West Africa: First Absolute Intensity Results from Burkina Faso

    NASA Astrophysics Data System (ADS)

    Kapper, Lisa; Donadini, Fabio; Serneels, Vincent; Tema, Evdokia; Goguitchaichvili, Avto; Julio Morales, Juan

    2017-03-01

    We present absolute geomagnetic intensities from iron smelting furnaces discovered at the metallurgical site of Korsimoro, Burkina Faso. Up to now, archaeologists recognized four different types of furnaces based on different construction methods, which were related to four subsequent time periods. Additionally, radiocarbon ages obtained from charcoal confine the studied furnaces to ages ranging from 700-1700 AD, in good agreement with the archaeologically determined time periods for each type of furnace. Archaeointensity results reveal three main groups of Arai diagrams. The first two groups contain specimens with either linear Arai diagrams, or slightly curved diagrams or two phases of magnetization. The third group encompasses specimens with strong zigzag or curvature in their Arai diagrams. Specimens of the first two groups were accepted after applying selection criteria to guarantee the high quality of the results. Our data compared to palaeosecular variation curves show a similar decreasing trend between 900-1500 AD. However, they reveal larger amplitudes at around 800 AD and 1650 AD than the reference curves and geomagnetic field models. Furthermore, they agree well with archaeomagnetic data from Mali and Senegal around 800 AD and with volcanic data around 1700 AD.

  16. Reconstructing the Geomagnetic Field in West Africa: First Absolute Intensity Results from Burkina Faso

    PubMed Central

    Kapper, Lisa; Donadini, Fabio; Serneels, Vincent; Tema, Evdokia; Goguitchaichvili, Avto; Julio Morales, Juan

    2017-01-01

    We present absolute geomagnetic intensities from iron smelting furnaces discovered at the metallurgical site of Korsimoro, Burkina Faso. Up to now, archaeologists recognized four different types of furnaces based on different construction methods, which were related to four subsequent time periods. Additionally, radiocarbon ages obtained from charcoal confine the studied furnaces to ages ranging from 700–1700 AD, in good agreement with the archaeologically determined time periods for each type of furnace. Archaeointensity results reveal three main groups of Arai diagrams. The first two groups contain specimens with either linear Arai diagrams, or slightly curved diagrams or two phases of magnetization. The third group encompasses specimens with strong zigzag or curvature in their Arai diagrams. Specimens of the first two groups were accepted after applying selection criteria to guarantee the high quality of the results. Our data compared to palaeosecular variation curves show a similar decreasing trend between 900–1500 AD. However, they reveal larger amplitudes at around 800 AD and 1650 AD than the reference curves and geomagnetic field models. Furthermore, they agree well with archaeomagnetic data from Mali and Senegal around 800 AD and with volcanic data around 1700 AD. PMID:28350006

  17. On the shape of the hospital industry long run average cost curve.

    PubMed Central

    Finkler, S A

    1979-01-01

    Empirical studies of the hospital industry have produced conflicting results with respect to the shape of the industry's long run average cost (LRAC) curve. Some of the studies have found a classical U-shaped curve. Others have produced results indicating that the LRAC curve is much closer to being L-shaped. Some theoretical support exists for both sets of findings. While classical theory predicts that the LRAC curve will be U-shaped, Alchian has presented theoretical arguments explaining why such curves would be L-shaped. This paper reconciles the results of these studies. The basis for the reconciliation is recognition of the failure of individual hospitals to produce all their individual product lines at efficient volumes. Such inefficient production is feasible and perhaps common, given the incentive structure which exists under current cost reimbursement systems. The implication of this paper is that large hospitals may have a greater potential for scale economies than has previously been recognized. PMID:528221

  18. On the shape of the hospital industry long run average cost curve.

    PubMed

    Finkler, S A

    1979-01-01

    Empirical studies of the hospital industry have produced conflicting results with respect to the shape of the industry's long run average cost (LRAC) curve. Some of the studies have found a classical U-shaped curve. Others have produced results indicating that the LRAC curve is much closer to being L-shaped. Some theoretical support exists for both sets of findings. While classical theory predicts that the LRAC curve will be U-shaped, Alchian has presented theoretical arguments explaining why such curves would be L-shaped. This paper reconciles the results of these studies. The basis for the reconciliation is recognition of the failure of individual hospitals to produce all their individual product lines at efficient volumes. Such inefficient production is feasible and perhaps common, given the incentive structure which exists under current cost reimbursement systems. The implication of this paper is that large hospitals may have a greater potential for scale economies than has previously been recognized.

  19. The Impact of Grading on a Curve: Assessing the Results of Kulick and Wright's Simulation Analysis

    ERIC Educational Resources Information Center

    Bailey, Gary L.; Steed, Ronald C.

    2012-01-01

    Kulick and Wright concluded, based on theoretical mathematical simulations of hypothetical student exam scores, that assigning exam grades to students based on the relative position of their exam performance scores within a normal curve may be unfair, given the role that randomness plays in any given student's performance on any given exam.…

  20. Curve progression 25 years after bracing for adolescent idiopathic scoliosis: long term comparative results between two matched groups of 18 versus 23 hours daily bracing.

    PubMed

    Pellios, Stavros; Kenanidis, Eustathios; Potoupnis, Michael; Tsiridis, Eleftherios; Sayegh, Fares E; Kirkos, John; Kapetanos, George A

    2016-01-01

    Scoliotic curves do not necessarily stop progressing at skeletal maturity. The factors that influence curve behavior following bracing are not fully determined. Our objectives were to evaluate the loss of the scoliotic curve correction in a cohort of patients treated with bracing during adolescence and to compare the outcomes of 18 versus 23 h of bracing at a mean of 25 years post brace removal. Seventy-seven patients, who were successfully treated for Adolescent Idiopathic Scoliosis with Βoston brace, were re-evaluated 25 years after the end of their treatment. Patients were further divided in 2 matched groups; those wearing the brace for 23 h and those not wearing the brace at school-time, limiting the application of the brace to 18 h. The mean scoliotic curve was compared between groups before, during, just after bracing and 25 years post bracing. Validated in patients' native language forms of Short Form 36 and Oswestry Disability Index questionnaires were used to compare the quality of life between groups 25 years post bracing. The mean age of the cohort was 40.4 (±3.2) years. They underwent long term follow up at a mean of 25.16 (±2.69) years after brace removal. The mean cohort scoliotic curve increased by 3.9 (±6.69) at 25 years since brace removal. There was however no significant difference in the mean Cobb angle of the cohort between pre brace and long term follow up period (p = 0.307). The 18 and 23 h application groups were comparable according to demographics and several bracing and scoliotic curve parameters. There was no significant difference in the mean curve magnitude between 18 and 23 h application groups at brace removal (p = 0.512) and at 25 years follow-up (p = 0.878). There was also no significant difference in the mean score of Quality of Life questionnaires between groups at long term follow up. Scoliotic curves do not necessarily stop progressing after bracing. Bracing is effective treatment method with good

  1. Cant deficiency, curving speeds and tilt

    DOT National Transportation Integrated Search

    2011-01-01

    In the US, increasing passenger speeds to improve trip time usually involves increasing speeds through curves. Increasing speeds through curves will increase the lateral force exerted on track during curving, thus requiring more intensive track maint...

  2. Linear Titration Curves of Acids and Bases.

    PubMed

    Joseph, N R

    1959-05-29

    The Henderson-Hasselbalch equation, by a simple transformation, becomes pH - pK = pA - pB, where pA and pB are the negative logarithms of acid and base concentrations. Sigmoid titration curves then reduce to straight lines; titration curves of polyelectrolytes, to families of straight lines. The method is applied to the titration of the dipeptide glycyl aminotricarballylic acid, with four titrable groups. Results are expressed as Cartesian and d'Ocagne nomograms. The latter is of a general form applicable to polyelectrolytes of any degree of complexity.

  3. Video Game Acceptance: A Meta-Analysis of the Extended Technology Acceptance Model.

    PubMed

    Wang, Xiaohui; Goh, Dion Hoe-Lian

    2017-11-01

    The current study systematically reviews and summarizes the existing literature of game acceptance, identifies the core determinants, and evaluates the strength of the relationships in the extended technology acceptance model. Moreover, this study segments video games into two categories: hedonic and utilitarian and examines player acceptance of these two types separately. Through a meta-analysis of 50 articles, we find that perceived ease of use (PEOU), perceived usefulness (PU), and perceived enjoyment (PE) significantly associate with attitude and behavioral intention. PE is the dominant predictor of hedonic game acceptance, while PEOU and PU are the main determinants of utilitarian game acceptance. Furthermore, we find that respondent type and game platform are significant moderators. Findings of this study provide critical insights into the phenomenon of game acceptance and suggest directions for future research.

  4. CURV 3: Characteristics and mission applications

    NASA Astrophysics Data System (ADS)

    Perkins, W. W.; Brady, L. K.

    1984-03-01

    The Cable-Controlled Underwater Recovery Vehicle (CURV) program was begun by NOSC for the specific purpose of developing economical systems to recover test ordnance at NOSC's Long Beach and San Clemente Island test ranges. CURV 3 is the latest in this series of tethered, unmanned, remotely controlled vehicles and its present capabilities far exceed the original CURV 1. Originally conceived for use as a search and recovery vehicle, CURV has evolved into a versatile and easily adaptable multipurpose work vehicle capable of performing search and recovery tasks as well as pursuing test, evaluation, exploration, and work projects. Basically, CURV is a composite of integrated subsystems including such items as propulsion, search and navigation, optics, hydraulics, and tools. Because it is unmanned and does not require life support or other complex support systems, CURV is able to perform most undersea tasks more economically and efficiently than maned systems. Also, since it is powered and controlled from the surface, CURV has a continuous, unlimited operating capability. Under emergency conditions, the vehicle can operate to 10,000-foot depths. CURV can be easily transported to any spot in the world. Upon arrival of the vehicle, control van, cable, and support gear can be mounted on a suitable ship of opportunity.

  5. MICA: Multiple interval-based curve alignment

    NASA Astrophysics Data System (ADS)

    Mann, Martin; Kahle, Hans-Peter; Beck, Matthias; Bender, Bela Johannes; Spiecker, Heinrich; Backofen, Rolf

    2018-01-01

    MICA enables the automatic synchronization of discrete data curves. To this end, characteristic points of the curves' shapes are identified. These landmarks are used within a heuristic curve registration approach to align profile pairs by mapping similar characteristics onto each other. In combination with a progressive alignment scheme, this enables the computation of multiple curve alignments. Multiple curve alignments are needed to derive meaningful representative consensus data of measured time or data series. MICA was already successfully applied to generate representative profiles of tree growth data based on intra-annual wood density profiles or cell formation data. The MICA package provides a command-line and graphical user interface. The R interface enables the direct embedding of multiple curve alignment computation into larger analyses pipelines. Source code, binaries and documentation are freely available at https://github.com/BackofenLab/MICA

  6. The Reddening Curve below 1200 Angstroms.

    NASA Astrophysics Data System (ADS)

    Wofford, Aida; Leitherer, C.

    2012-05-01

    Thirty percent of the bolometric luminosity of star-forming galaxies is emitted in the wavelength range between 912 and 1200 Å. This wavelength range carries information about the stellar mass distribution and the star formation rate of the newly formed populations of massive (M > 8 M_sun) stars in these galaxies, and about the leakage of Lyman-continuum photons from these galaxies. This is also the wavelength range where the reddening curve peaks, and where our understanding of the reddening curve is the most fragmentary. We present preliminary results from a spectroscopic study aimed to characterize the reddening curve below 1200 Å. Our project is based on the analysis of archival HUT (830-1850 Å), FUSE (905-1187 Å), IUE (1150-3200 Å), and HST (1200-3200 Å) data of a sample of 70 low-redshift (z<0.1) star-forming galaxies, using synthetic spectra of stellar populations plus the ISM. The stellar population and nebula models were generated with STARBURST99 and CLOUDY, respectively. This work is supported by NASA J1401.

  7. Physiologic correlates to background noise acceptance

    NASA Astrophysics Data System (ADS)

    Tampas, Joanna; Harkrider, Ashley; Nabelek, Anna

    2004-05-01

    Acceptance of background noise can be evaluated by having listeners indicate the highest background noise level (BNL) they are willing to accept while following the words of a story presented at their most comfortable listening level (MCL). The difference between the selected MCL and BNL is termed the acceptable noise level (ANL). One of the consistent findings in previous studies of ANL is large intersubject variability in acceptance of background noise. This variability is not related to age, gender, hearing sensitivity, personality, type of background noise, or speech perception in noise performance. The purpose of the current experiment was to determine if individual differences in physiological activity measured from the peripheral and central auditory systems of young female adults with normal hearing can account for the variability observed in ANL. Correlations between ANL and various physiological responses, including spontaneous, click-evoked, and distortion-product otoacoustic emissions, auditory brainstem and middle latency evoked potentials, and electroencephalography will be presented. Results may increase understanding of the regions of the auditory system that contribute to individual noise acceptance.

  8. Computerized measurement and analysis of scoliosis: a more accurate representation of the shape of the curve.

    PubMed

    Jeffries, B F; Tarlton, M; De Smet, A A; Dwyer, S J; Brower, A C

    1980-02-01

    A computer program was created to identify and accept spatial data regarding the location of the thoracic and lumbar vertebral bodies on scoliosis films. With this information, the spine can be mathematically reconstructed and a scoliotic angle calculated. There was a 0.968 positive correlation between the computer and manual methods of measuring scoliosis. The computer method was more reproducible with a standard deviation of only 1.3 degrees. Computerized measurement of scoliosis also provides better evaluation of the true shape of the curve.

  9. Three Decades of Anti-evolution Campaign and its Results: Turkish Undergraduates' Acceptance and Understanding of the Biological Evolution Theory

    NASA Astrophysics Data System (ADS)

    Peker, Deniz; Comert, Gulsum Gul; Kence, Aykut

    2010-06-01

    Even though in the early years of the Republic of Turkey Darwin’s theory of evolution was treated as a scientific theory and taught fairly in schools, despite all the substantial evidence accumulated supporting the theory of evolution since then, Darwin and his ideas today have been scorned by curriculum and education policy makers. Furthermore, Turkish students and academics have been faced with unprecedented creationist propaganda for many years. In this paper, we first provide a glimpse of the theory of evolution and creationism in Turkey, we then report the results of our survey study ( N = 1,098) about the undergraduates’ acceptance and understanding of Darwinian evolution and some of the socioeconomic variables affecting those measures. Our cross sectional study shows that acceptance and understanding of the theory of evolution is quite low. We criticize the current state of evolution education in Turkey and call for a change towards a scientific treatment of the theory evolution in schools.

  10. Demand Curves for Hypothetical Cocaine in Cocaine-Dependent Individuals

    PubMed Central

    Bruner, Natalie R.; Johnson, Matthew W.

    2013-01-01

    Rationale Drug purchasing tasks have been successfully used to examine demand for hypothetical consumption of abused drugs including heroin, nicotine, and alcohol. In these tasks drug users make hypothetical choices whether to buy drugs, and if so, at what quantity, at various potential prices. These tasks allow for behavioral economic assessment of that drug's intensity of demand (preferred level of consumption at extremely low prices) and demand elasticity (sensitivity of consumption to price), among other metrics. However, a purchasing task for cocaine in cocaine-dependent individuals has not been investigated. Objectives This study examined a novel Cocaine Purchasing Task and the relation between resulting demand metrics and self-reported cocaine use data. Methods Participants completed a questionnaire assessing hypothetical purchases of cocaine units at prices ranging from $0.01 to $1,000. Demand curves were generated from responses on the Cocaine Purchasing Task. Correlations compared metrics from the demand curve to measures of real-world cocaine use. Results Group and individual data were well modeled by a demand curve function. The validity of the Cocaine Purchasing Task was supported by a significant correlation between the demand curve metrics of demand intensity and Omax (determined from Cocaine Purchasing Task data) and self-reported measures of cocaine use. Partial correlations revealed that after controlling for demand intensity, demand elasticity and the related measure, Pmax, were significantly correlated with real-world cocaine use. Conclusions Results indicate that the Cocaine Purchasing Task produces orderly demand curve data, and that these data relate to real-world measures of cocaine use. PMID:24217899

  11. Utility of Interobserver Agreement Statistics in Establishing Radiology Resident Learning Curves During Self-directed Radiologic Anatomy Training.

    PubMed

    Tureli, Derya; Altas, Hilal; Cengic, Ismet; Ekinci, Gazanfer; Baltacioglu, Feyyaz

    2015-10-01

    The aim of the study was to ascertain the learning curves for the radiology residents when first introduced to an anatomic structure in magnetic resonance images (MRI) to which they have not been previously exposed to. The iliolumbar ligament is a good marker for testing learning curves of radiology residents because the ligament is not part of a routine lumbar MRI reporting and has high variability in detection. Four radiologists, three residents without previous training and one mentor, studied standard axial T1- and T2-weighted images of routine lumbar MRI examinations. Radiologists had to define iliolumbar ligament while blinded to each other's findings. Interobserver agreement analyses, namely Cohen and Fleiss κ statistics, were performed for groups of 20 cases to evaluate the self-learning curve of radiology residents. Mean κ values of resident-mentor pairs were 0.431, 0.608, 0.604, 0.826, and 0.963 in the analysis of successive groups (P < .001). The results indicate that the concordance between the experienced and inexperienced radiologists started as weak (κ <0.5) and gradually became very acceptable (κ >0.8). Therefore, a junior radiology resident can obtain enough experience in identifying a rather ambiguous anatomic structure in routine MRI after a brief instruction of a few minutes by a mentor and studying approximately 80 cases by oneself. Implementing this methodology will help radiology educators obtain more concrete ideas on the optimal time and effort required for supported self-directed visual learning processes in resident education. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

  12. Calibration of hydrological models using flow-duration curves

    NASA Astrophysics Data System (ADS)

    Westerberg, I. K.; Guerrero, J.-L.; Younger, P. M.; Beven, K. J.; Seibert, J.; Halldin, S.; Freer, J. E.; Xu, C.-Y.

    2010-12-01

    The degree of belief we have in predictions from hydrologic models depends on how well they can reproduce observations. Calibrations with traditional performance measures such as the Nash-Sutcliffe model efficiency are challenged by problems including: (1) uncertain discharge data, (2) variable importance of the performance with flow magnitudes, (3) influence of unknown input/output errors and (4) inability to evaluate model performance when observation time periods for discharge and model input data do not overlap. A new calibration method using flow-duration curves (FDCs) was developed which addresses these problems. The method focuses on reproducing the observed discharge frequency distribution rather than the exact hydrograph. It consists of applying limits of acceptability for selected evaluation points (EPs) of the observed uncertain FDC in the extended GLUE approach. Two ways of selecting the EPs were tested - based on equal intervals of discharge and of volume of water. The method was tested and compared to a calibration using the traditional model efficiency for the daily four-parameter WASMOD model in the Paso La Ceiba catchment in Honduras and for Dynamic TOPMODEL evaluated at an hourly time scale for the Brue catchment in Great Britain. The volume method of selecting EPs gave the best results in both catchments with better calibrated slow flow, recession and evaporation than the other criteria. Observed and simulated time series of uncertain discharges agreed better for this method both in calibration and prediction in both catchments without resulting in overpredicted simulated uncertainty. An advantage with the method is that the rejection criterion is based on an estimation of the uncertainty in discharge data and that the EPs of the FDC can be chosen to reflect the aims of the modelling application e.g. using more/less EPs at high/low flows. While the new method is less sensitive to epistemic input/output errors than the normal use of limits of

  13. The sales learning curve.

    PubMed

    Leslie, Mark; Holloway, Charles A

    2006-01-01

    When a company launches a new product into a new market, the temptation is to immediately ramp up sales force capacity to gain customers as quickly as possible. But hiring a full sales force too early just causes the firm to burn through cash and fail to meet revenue expectations. Before it can sell an innovative product efficiently, the entire organization needs to learn how customers will acquire and use it, a process the authors call the sales learning curve. The concept of a learning curve is well understood in manufacturing. Employees transfer knowledge and experience back and forth between the production line and purchasing, manufacturing, engineering, planning, and operations. The sales learning curve unfolds similarly through the give-and-take between the company--marketing, sales, product support, and product development--and its customers. As customers adopt the product, the firm modifies both the offering and the processes associated with making and selling it. Progress along the manufacturing curve is measured by tracking cost per unit: The more a firm learns about the manufacturing process, the more efficient it becomes, and the lower the unit cost goes. Progress along the sales learning curve is measured in an analogous way: The more a company learns about the sales process, the more efficient it becomes at selling, and the higher the sales yield. As the sales yield increases, the sales learning process unfolds in three distinct phases--initiation, transition, and execution. Each phase requires a different size--and kind--of sales force and represents a different stage in a company's production, marketing, and sales strategies. Adjusting those strategies as the firm progresses along the sales learning curve allows managers to plan resource allocation more accurately, set appropriate expectations, avoid disastrous cash shortfalls, and reduce both the time and money required to turn a profit.

  14. Energy dissipation in flows through curved spaces.

    PubMed

    Debus, J-D; Mendoza, M; Succi, S; Herrmann, H J

    2017-02-14

    Fluid dynamics in intrinsically curved geometries is encountered in many physical systems in nature, ranging from microscopic bio-membranes all the way up to general relativity at cosmological scales. Despite the diversity of applications, all of these systems share a common feature: the free motion of particles is affected by inertial forces originating from the curvature of the embedding space. Here we reveal a fundamental process underlying fluid dynamics in curved spaces: the free motion of fluids, in the complete absence of solid walls or obstacles, exhibits loss of energy due exclusively to the intrinsic curvature of space. We find that local sources of curvature generate viscous stresses as a result of the inertial forces. The curvature- induced viscous forces are shown to cause hitherto unnoticed and yet appreciable energy dissipation, which might play a significant role for a variety of physical systems involving fluid dynamics in curved spaces.

  15. Representation of Ice Geometry by Parametric Functions: Construction of Approximating NURBS Curves and Quantification of Ice Roughness--Year 1: Approximating NURBS Curves

    NASA Technical Reports Server (NTRS)

    Dill, Loren H.; Choo, Yung K. (Technical Monitor)

    2004-01-01

    Software was developed to construct approximating NURBS curves for iced airfoil geometries. Users specify a tolerance that determines the extent to which the approximating curve follows the rough ice. The user can therefore smooth the ice geometry in a controlled manner, thereby enabling the generation of grids suitable for numerical aerodynamic simulations. Ultimately, this ability to smooth the ice geometry will permit studies of the effects of smoothing upon the aerodynamics of iced airfoils. The software was applied to several different types of iced airfoil data collected in the Icing Research Tunnel at NASA Glenn Research Center, and in all cases was found to efficiently generate suitable approximating NURBS curves. This method is an improvement over the current "control point formulation" of Smaggice (v.1.2). In this report, we present the relevant theory of approximating NURBS curves and discuss typical results of the software.

  16. Heterozygote PCR product melting curve prediction.

    PubMed

    Dwight, Zachary L; Palais, Robert; Kent, Jana; Wittwer, Carl T

    2014-03-01

    Melting curve prediction of PCR products is limited to perfectly complementary strands. Multiple domains are calculated by recursive nearest neighbor thermodynamics. However, the melting curve of an amplicon containing a heterozygous single-nucleotide variant (SNV) after PCR is the composite of four duplexes: two matched homoduplexes and two mismatched heteroduplexes. To better predict the shape of composite heterozygote melting curves, 52 experimental curves were compared with brute force in silico predictions varying two parameters simultaneously: the relative contribution of heteroduplex products and an ionic scaling factor for mismatched tetrads. Heteroduplex products contributed 25.7 ± 6.7% to the composite melting curve, varying from 23%-28% for different SNV classes. The effect of ions on mismatch tetrads scaled to 76%-96% of normal (depending on SNV class) and averaged 88 ± 16.4%. Based on uMelt (www.dna.utah.edu/umelt/umelt.html) with an expanded nearest neighbor thermodynamic set that includes mismatched base pairs, uMelt HETS calculates helicity as a function of temperature for homoduplex and heteroduplex products, as well as the composite curve expected from heterozygotes. It is an interactive Web tool for efficient genotyping design, heterozygote melting curve prediction, and quality control of melting curve experiments. The application was developed in Actionscript and can be found online at http://www.dna.utah.edu/hets/. © 2013 WILEY PERIODICALS, INC.

  17. Examining the relationship between male rape myth acceptance, female rape myth acceptance, victim blame, homophobia, gender roles, and ambivalent sexism.

    PubMed

    Davies, Michelle; Gilston, Jennifer; Rogers, Paul

    2012-09-01

    The relationship between male rape myth acceptance, female rape myth acceptance, attitudes toward gay men, a series of gender role and sexism measures, victim blame and assault severity were investigated. It was predicted that men would display more negative, stereotypical attitudes than women and that male rape myth endorsement would be related to, and predicted by, the other attitude and attribution scales. Respondents comprised 323 undergraduates (146 males and 177 females) from a large University in the Northwest of England. Results broadly conformed to predictions, with men generally more negative than women, and male rape myth acceptance significantly related to female rape myth acceptance, negative attitudes about gay men, gender role attitudes, and victim blame. Furthermore, male rape myth acceptance was predicted by female rape myth acceptance, gender attitudes, and victim blame. Methodological issues and implications for future work and those working with victims are discussed.

  18. Understand Centrifugal Compressor stage curves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stadler, E.L.

    1986-08-01

    Multistage Centrifugal Compressor Performance is generally presented in the form of a composite curve showing discharge pressure and bhp plotted as a function of capacity. This composite curve represents the cumulative performance of each stage performance curve. A simple yet quite accurate means of measuring compressor total performance is to test each stage as a single-stage compressor, usually on air with atmospheric inlets. Stage curves are then generated from the test data and three important variables are plotted: head coefficient, work coefficient and adiabatic efficiency. These variables are plotted against a normalized flow coefficient, Q/N, which is inlet volume flowmore » (cfm) divided by impeller speed (rpm). The nomenclature used to define these stage variables changes from manufacturer to manufacturer; however, the parameters presented are the same. An understanding of each parameter's theoretical derivation and determination from test data will help the engineer reviewing test curves to be more cognizant of the interrelationships between these variables; specifically, how they affect overall machine pressure rise and power consumption.« less

  19. Analytic reflected light curves for exoplanets

    NASA Astrophysics Data System (ADS)

    Haggard, Hal M.; Cowan, Nicolas B.

    2018-07-01

    The disc-integrated reflected brightness of an exoplanet changes as a function of time due to orbital and rotational motions coupled with an inhomogeneous albedo map. We have previously derived analytic reflected light curves for spherical harmonic albedo maps in the special case of a synchronously rotating planet on an edge-on orbit (Cowan, Fuentes & Haggard). In this paper, we present analytic reflected light curves for the general case of a planet on an inclined orbit, with arbitrary spin period and non-zero obliquity. We do so for two different albedo basis maps: bright points (δ-maps), and spherical harmonics (Y_ l^m-maps). In particular, we use Wigner D-matrices to express an harmonic light curve for an arbitrary viewing geometry as a non-linear combination of harmonic light curves for the simpler edge-on, synchronously rotating geometry. These solutions will enable future exploration of the degeneracies and information content of reflected light curves, as well as fast calculation of light curves for mapping exoplanets based on time-resolved photometry. To these ends, we make available Exoplanet Analytic Reflected Lightcurves, a simple open-source code that allows rapid computation of reflected light curves.

  20. Transformation-invariant and nonparametric monotone smooth estimation of ROC curves.

    PubMed

    Du, Pang; Tang, Liansheng

    2009-01-30

    When a new diagnostic test is developed, it is of interest to evaluate its accuracy in distinguishing diseased subjects from non-diseased subjects. The accuracy of the test is often evaluated by receiver operating characteristic (ROC) curves. Smooth ROC estimates are often preferable for continuous test results when the underlying ROC curves are in fact continuous. Nonparametric and parametric methods have been proposed by various authors to obtain smooth ROC curve estimates. However, there are certain drawbacks with the existing methods. Parametric methods need specific model assumptions. Nonparametric methods do not always satisfy the inherent properties of the ROC curves, such as monotonicity and transformation invariance. In this paper we propose a monotone spline approach to obtain smooth monotone ROC curves. Our method ensures important inherent properties of the underlying ROC curves, which include monotonicity, transformation invariance, and boundary constraints. We compare the finite sample performance of the newly proposed ROC method with other ROC smoothing methods in large-scale simulation studies. We illustrate our method through a real life example. Copyright (c) 2008 John Wiley & Sons, Ltd.

  1. In acceptance we trust? Conceptualising acceptance as a viable approach to NGO security management.

    PubMed

    Fast, Larissa A; Freeman, C Faith; O'Neill, Michael; Rowley, Elizabeth

    2013-04-01

    This paper documents current understanding of acceptance as a security management approach and explores issues and challenges non-governmental organisations (NGOs) confront when implementing an acceptance approach to security management. It argues that the failure of organisations to systematise and clearly articulate acceptance as a distinct security management approach and a lack of organisational policies and procedures concerning acceptance hinder its efficacy as a security management approach. The paper identifies key and cross-cutting components of acceptance that are critical to its effective implementation in order to advance a comprehensive and systematic concept of acceptance. The key components of acceptance illustrate how organisational and staff functions affect positively or negatively an organisation's acceptance, and include: an organisation's principles and mission, communications, negotiation, programming, relationships and networks, stakeholder and context analysis, staffing, and image. The paper contends that acceptance is linked not only to good programming, but also to overall organisational management and structures. © 2013 The Author(s). Journal compilation © Overseas Development Institute, 2013.

  2. The Aggregate Demand Curve: A Reply.

    ERIC Educational Resources Information Center

    Hansen, Richard B.; And Others

    1987-01-01

    Responds to claims about the instructional value of the downward-sloping aggregate demand curve in teaching principles of macroeconomics. Examines the effects of interest-rates and the role of money on demand curves. Concludes by arguing against the use of downward-sloping aggregate demand curves in textbooks. (RKM)

  3. [Difference of three standard curves of real-time reverse-transcriptase PCR in viable Vibrio parahaemolyticus quantification].

    PubMed

    Jin, Mengtong; Sun, Wenshuo; Li, Qin; Sun, Xiaohong; Pan, Yingjie; Zhao, Yong

    2014-04-04

    We evaluated the difference of three standard curves in quantifying viable Vibrio parahaemolyticus in samples by real-time reverse-transcriptase PCR (Real-time RT-PCR). The standard curve A was established by 10-fold diluted cDNA. The cDNA was reverse transcripted after RNA synthesized in vitro. The standard curve B and C were established by 10-fold diluted cDNA. The cDNA was synthesized after RNA isolated from Vibrio parahaemolyticus in pure cultures (10(8) CFU/mL) and shrimp samples (10(6) CFU/g) (Standard curve A and C were proposed for the first time). Three standard curves were performed to quantitatively detect V. parahaemolyticus in six samples, respectively (Two pure cultured V. parahaemolyticus samples, two artificially contaminated cooked Litopenaeus vannamei samples and two artificially contaminated Litopenaeus vannamei samples). Then we evaluated the quantitative results of standard curve and the plate counting results and then analysed the differences. The three standard curves all show a strong linear relationship between the fractional cycle number and V. parahaemolyticus concentration (R2 > 0.99); The quantitative results of Real-time PCR were significantly (p < 0.05) lower than the results of plate counting. The relative errors compared with the results of plate counting ranked standard curve A (30.0%) > standard curve C (18.8%) > standard curve B (6.9%); The average differences between standard curve A and standard curve B and C were - 2.25 Lg CFU/mL and - 0.75 Lg CFU/mL, respectively, and the mean relative errors were 48.2% and 15.9%, respectively; The average difference between standard curve B and C was among (1.47 -1.53) Lg CFU/mL and the average relative errors were among 19.0% - 23.8%. Standard curve B could be applied to Real-time RT-PCR when quantify the number of viable microorganisms in samples.

  4. Impact of an Acceptance Facilitating Intervention on Patients' Acceptance of Internet-based Pain Interventions: A Randomized Controlled Trial.

    PubMed

    Baumeister, Harald; Seifferth, Holger; Lin, Jiaxi; Nowoczin, Lisa; Lüking, Marianne; Ebert, David

    2015-06-01

    Results from clinical trials indicate that Internet-based psychological pain interventions are effective in treating chronic pain. However, little is known about patients' acceptance of these programs and how to positively influence patients' intention to engage in them. Therefore, the present study aimed (1) to assess patients' acceptance of Internet-based interventions, and (2) to examine whether patients' acceptance can be increased by an acceptance facilitating intervention. A total of 104 patients with chronic pain from 2 pain units were randomly allocated to an intervention group (IG) and a no-intervention control group (CG). The IG was shown a short informational video about Internet-based psychological pain interventions before receiving a questionnaire on patients' acceptance of Internet-based psychological pain interventions and predictors of acceptance (performance expectancy, effort expectancy, social influence, facilitating conditions, Internet usage, and Internet anxiety). The CG filled out the questionnaire immediately. Patients' acceptance was measured with a 4-item scale (sum score ranging from 4 to 20). Baseline acceptance of Internet-based interventions was reported as low (sum-score:4-9) by 53.8%, moderate (10 to 15) by 42.3%, and high (16 to 20) by 3.9% of the patients with chronic pain in the CG. The IG showed a significantly higher acceptance (M = 12.17, SD = 4.22) than the CG (M = 8.94, SD = 3.71) with a standardized mean difference of d = 0.81 (95% CI, 0.41, 1.21). All predictor variables were significantly improved in the IG compared with the CG, except for Internet usage. Patients with chronic pain display a relatively low acceptance of Internet-based psychological pain interventions, which can be substantially increased by a short informational video.

  5. A dose-response curve for biodosimetry from a 6 MV electron linear accelerator

    PubMed Central

    Lemos-Pinto, M.M.P.; Cadena, M.; Santos, N.; Fernandes, T.S.; Borges, E.; Amaral, A.

    2015-01-01

    Biological dosimetry (biodosimetry) is based on the investigation of radiation-induced biological effects (biomarkers), mainly dicentric chromosomes, in order to correlate them with radiation dose. To interpret the dicentric score in terms of absorbed dose, a calibration curve is needed. Each curve should be constructed with respect to basic physical parameters, such as the type of ionizing radiation characterized by low or high linear energy transfer (LET) and dose rate. This study was designed to obtain dose calibration curves by scoring of dicentric chromosomes in peripheral blood lymphocytes irradiated in vitro with a 6 MV electron linear accelerator (Mevatron M, Siemens, USA). Two software programs, CABAS (Chromosomal Aberration Calculation Software) and Dose Estimate, were used to generate the curve. The two software programs are discussed; the results obtained were compared with each other and with other published low LET radiation curves. Both software programs resulted in identical linear and quadratic terms for the curve presented here, which was in good agreement with published curves for similar radiation quality and dose rates. PMID:26445334

  6. Children acceptance of laser dental treatment

    NASA Astrophysics Data System (ADS)

    Lazea, Andreea; Todea, Carmen

    2016-03-01

    Objectives: To evaluate the dental anxiety level and the degree of acceptance of laser assisted pedodontic treatments from the children part. Also, we want to underline the advantages of laser use in pediatric dentistry, to make this technology widely used in treating dental problems of our children patients. Methods: Thirty pediatric dental patients presented in the Department of Pedodontics, University of Medicine and Pharmacy "Victor Babeş", Timişoara were evaluated using the Wong-Baker pain rating scale, wich was administered postoperatory to all patients, to assess their level of laser therapy acceptance. Results: Wong-Baker faces pain rating scale (WBFPS) has good validity and high specificity; generally it's easy for children to use, easy to compare and has good feasibility. Laser treatment has been accepted and tolerated by pediatric patients for its ability to reduce or eliminate pain. Around 70% of the total sample showed an excellent acceptance of laser dental treatment. Conclusions: Laser technology is useful and effective in many clinical situations encountered in pediatric dentistry and a good level of pacient acceptance is reported during all laser procedures on hard and soft tissues.

  7. Emperical Tests of Acceptance Sampling Plans

    NASA Technical Reports Server (NTRS)

    White, K. Preston, Jr.; Johnson, Kenneth L.

    2012-01-01

    Acceptance sampling is a quality control procedure applied as an alternative to 100% inspection. A random sample of items is drawn from a lot to determine the fraction of items which have a required quality characteristic. Both the number of items to be inspected and the criterion for determining conformance of the lot to the requirement are given by an appropriate sampling plan with specified risks of Type I and Type II sampling errors. In this paper, we present the results of empirical tests of the accuracy of selected sampling plans reported in the literature. These plans are for measureable quality characteristics which are known have either binomial, exponential, normal, gamma, Weibull, inverse Gaussian, or Poisson distributions. In the main, results support the accepted wisdom that variables acceptance plans are superior to attributes (binomial) acceptance plans, in the sense that these provide comparable protection against risks at reduced sampling cost. For the Gaussian and Weibull plans, however, there are ranges of the shape parameters for which the required sample sizes are in fact larger than the corresponding attributes plans, dramatically so for instances of large skew. Tests further confirm that the published inverse-Gaussian (IG) plan is flawed, as reported by White and Johnson (2011).

  8. Measuring and Promoting Acceptance of Young Children with Disabilities.

    ERIC Educational Resources Information Center

    Favazza, Paddy C.; Phillipsen, Leslie; Kumar, Poonam

    2000-01-01

    Results of two studies indicate the Acceptance Scale for Kindergartners was reliable with a sample of minority, low socioeconomic status children and that children exposed to all of the components of an intervention designed to promote acceptance of young children with disabilities had short-term and long-term gains in acceptance. (Contains…

  9. Equivalence of binormal likelihood-ratio and bi-chi-squared ROC curve models

    PubMed Central

    Hillis, Stephen L.

    2015-01-01

    A basic assumption for a meaningful diagnostic decision variable is that there is a monotone relationship between it and its likelihood ratio. This relationship, however, generally does not hold for a decision variable that results in a binormal ROC curve. As a result, receiver operating characteristic (ROC) curve estimation based on the assumption of a binormal ROC-curve model produces improper ROC curves that have “hooks,” are not concave over the entire domain, and cross the chance line. Although in practice this “improperness” is usually not noticeable, sometimes it is evident and problematic. To avoid this problem, Metz and Pan proposed basing ROC-curve estimation on the assumption of a binormal likelihood-ratio (binormal-LR) model, which states that the decision variable is an increasing transformation of the likelihood-ratio function of a random variable having normal conditional diseased and nondiseased distributions. However, their development is not easy to follow. I show that the binormal-LR model is equivalent to a bi-chi-squared model in the sense that the families of corresponding ROC curves are the same. The bi-chi-squared formulation provides an easier-to-follow development of the binormal-LR ROC curve and its properties in terms of well-known distributions. PMID:26608405

  10. Dealing with Non-stationarity in Intensity-Frequency-Duration Curve

    NASA Astrophysics Data System (ADS)

    Rengaraju, S.; Rajendran, V.; C T, D.

    2017-12-01

    Extremes like flood and drought are becoming frequent and more vulnerable in recent times, generally attributed to the recent revelation of climate change. One of the main concerns is that whether the present infrastructures like dams, storm water drainage networks, etc., which were designed following the so called `stationary' assumption, are capable of withstanding the expected severe extremes. Stationary assumption considers that extremes are not changing with respect to time. However, recent studies proved that climate change has altered the climate extremes both temporally and spatially. Traditionally, the observed non-stationary in the extreme precipitation is incorporated in the extreme value distributions in terms of changing parameters. Nevertheless, this raises a question which parameter needs to be changed, i.e. location or scale or shape, since either one or more of these parameters vary at a given location. Hence, this study aims to detect the changing parameters to reduce the complexity involved in the development of non-stationary IDF curve and to provide the uncertainty bound of estimated return level using Bayesian Differential Evolutionary Monte Carlo (DE-MC) algorithm. Firstly, the extreme precipitation series is extracted using Peak Over Threshold. Then, the time varying parameter(s) is(are) detected for the extracted series using Generalized Additive Models for Location Scale and Shape (GAMLSS). Then, the IDF curve is constructed using Generalized Pareto Distribution incorporating non-stationarity only if the parameter(s) is(are) changing with respect to time, otherwise IDF curve will follow stationary assumption. Finally, the posterior probability intervals of estimated return revel are computed through Bayesian DE-MC approach and the non-stationary based IDF curve is compared with the stationary based IDF curve. The results of this study emphasize that the time varying parameters also change spatially and the IDF curves should incorporate non

  11. Genres Across Cultures: Types of Acceptability Variation

    ERIC Educational Resources Information Center

    Shaw, Philip; Gillaerts, Paul; Jacobs, Everett; Palermo, Ofelia; Shinohara, Midori; Verckens, J. Piet

    2004-01-01

    One can ask four questions about genre validity across cultures. Does a certain form or configuration occur in the culture in question? Is it acceptable? If acceptable, is it in practice preferred? Is it recommended by prescriptive authorities? This paper reports the results of an attempt to answer these questions empirically by testing the…

  12. Preliminary evaluation of an analog procedure to assess acceptability of intimate partner violence against women: the Partner Violence Acceptability Movie Task

    PubMed Central

    Gracia, Enrique; Rodriguez, Christina M.; Lila, Marisol

    2015-01-01

    Acceptability of partner violence against women is a risk factor linked to its perpetration, and to public, professionals’ and victims’ responses to this behavior. Research on the acceptability of violence in intimate partner relationships is, however, limited by reliance solely on self-reports that often provide distorted or socially desirable accounts that may misrepresent respondents’ attitudes. This study presents data on the development and initial validation of a new analog task assessing respondents’ acceptability of physical violence toward women in intimate relationships: the Partner Violence Acceptability Movie Task (PVAM). This new analog task is intended to provide a more implicit measure of the acceptability of partner violence against women. For this analog task, clips were extracted from commercially available films (90-s segments) portraying partner violence. Two independent samples were used to develop and evaluate the PVAM: a sample of 245 undergraduate students and a sample of 94 male intimate partner violence offenders. This new analog task demonstrated acceptable internal consistency. Results also indicated adequate construct validity. Both perpetrators and undergraduates scoring high in the PVAM also scored higher in self-reported justifications of partner abuse. Perpetrators of partner violence scored significantly higher in acceptability of partner violence than the undergraduate sample (both male and female students), and male students scored higher than females. These preliminary results suggest that the PVAM may be a promising tool to assess the acceptability of violence in intimate partner relationships, highlighting the need to consider alternatives to self-report to evaluate potential beliefs about partner violence. PMID:26528220

  13. Quality Quandaries: Predicting a Population of Curves

    DOE PAGES

    Fugate, Michael Lynn; Hamada, Michael Scott; Weaver, Brian Phillip

    2017-12-19

    We present a random effects spline regression model based on splines that provides an integrated approach for analyzing functional data, i.e., curves, when the shape of the curves is not parametrically specified. An analysis using this model is presented that makes inferences about a population of curves as well as features of the curves.

  14. Quality Quandaries: Predicting a Population of Curves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fugate, Michael Lynn; Hamada, Michael Scott; Weaver, Brian Phillip

    We present a random effects spline regression model based on splines that provides an integrated approach for analyzing functional data, i.e., curves, when the shape of the curves is not parametrically specified. An analysis using this model is presented that makes inferences about a population of curves as well as features of the curves.

  15. Near room temperature magnetocaloric properties and the universal curve of MnCoGe1-xCux

    NASA Astrophysics Data System (ADS)

    Si, Xiaodong; Liu, Yongsheng; Lu, Xiaofei; Shen, Yulong; Wang, Wenli; Yu, Wenying; Zhou, Tao; Gao, Tian

    2017-05-01

    Intermetallic compounds based on MnCoGe have drawn attention due to the coupled magnetic and structural transformations and the large magnetocaloric entropy. Here, we provide a systematic comparison of experimental data under different magnetic fields with magnetic and the magnetocaloric properties. The ferromagnetic transition temperature (TC) increases from 353.4(6) K for x = 0.01 to 363.4(4) K for x = 0.04 with increasing nominal copper content. The maximum magnetic entropy change |ΔSM| in a magnetic field change of 5 T is found to be 18.3(2) J/(kg K) with a large relative cooling power (RCP) value of 292.5(4) J/kg for x = 0.01, revealing that the present system can provide an acceptable magnetocaloric effect at a cheaper price for magnetic refrigeration materials. Making attempt to contrast a master curve for the present system, we find the experimental values of magnetic field dependence of the magnetic entropy change are consistent with a phenomenological universal curve.

  16. Effect of different breath alcohol concentrations on driving performance in horizontal curves.

    PubMed

    Zhang, Xingjian; Zhao, Xiaohua; Du, Hongji; Ma, Jianming; Rong, Jian

    2014-11-01

    Driving under the influence of alcohol on curved roadway segments has a higher risk than driving on straight segments. To explore the effect of different breath alcohol concentration (BrAC) levels on driving performance in roadway curves, a driving simulation experiment was designed to collect 25 participants' driving performance parameters (i.e., speed and lane position) under the influence of 4 BrAC levels (0.00%, 0.03%, 0.06% and 0.09%) on 6 types of roadway curves (3 radii×2 turning directions). Driving performance data for 22 participants were collected successfully. Then the average and standard deviation of the two parameters were analyzed, considering the entire curve and different sections of the curve, respectively. The results show that the speed throughout curves is higher when drinking and driving than during sober driving. The significant interaction between alcohol and radius exists in the middle and tangent segments after a curve exit, indicating that a small radius can reduce speed at high BrAC levels. The significant impairment of alcohol on the stability of speed occurs mainly in the curve section between the point of curve (PC) and point of tangent (PT), with no impairment noted in tangent sections. The stability of speed is significantly worsened at higher BrAC levels. Alcohol and radius have interactive effects on the standard deviation of speed in the entry segment of curves, indicating that the small radius amplifies the instability of speed at high BrAC levels. For lateral movement, drivers tend to travel on the right side of the lane when drinking and driving, mainly in the approach and middle segments of curves. Higher BrAC levels worsen the stability of lateral movement in every segment of the curve, regardless of its radius and turning direction. The results are expected to provide reference for detecting the drinking and driving state. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Altering user' acceptance of automation through prior automation exposure.

    PubMed

    Bekier, Marek; Molesworth, Brett R C

    2017-06-01

    Air navigation service providers worldwide see increased use of automation as one solution to overcome the capacity constraints imbedded in the present air traffic management (ATM) system. However, increased use of automation within any system is dependent on user acceptance. The present research sought to determine if the point at which an individual is no longer willing to accept or cooperate with automation can be manipulated. Forty participants underwent training on a computer-based air traffic control programme, followed by two ATM exercises (order counterbalanced), one with and one without the aid of automation. Results revealed after exposure to a task with automation assistance, user acceptance of high(er) levels of automation ('tipping point') decreased; suggesting it is indeed possible to alter automation acceptance. Practitioner Summary: This paper investigates whether the point at which a user of automation rejects automation (i.e. 'tipping point') is constant or can be manipulated. The results revealed after exposure to a task with automation assistance, user acceptance of high(er) levels of automation decreased; suggesting it is possible to alter automation acceptance.

  18. Possibilities and acceptance of mobile information technologies for the elderly - first results of an empirical study.

    PubMed

    Szarvas, Ildikó; Nitsch, Manuela; Lambacher, Oliver; Howe, Jürgen; Reichwaldt, Nina; von Bargen, Tobias; Haux, Reinhold

    2013-01-01

    This paper summarizes the results of a questionnaire-study conducted for the project "Safe and mobile through accompanying assistance systems" (SIMBA) founded by the German Federal Ministry of Education and Research. The study analyzes the mobility requirements and obstacles of the 55 yearold and older seniors in three age-groups (N=210) to develop suitable health-enabling technologies. It focuses on the mobility of the elderly on foot, by public transport, by bicycle and by taxi. The usage and the acceptance of existing mobile devices are determined, to select a suitable terminal for assistance systems. The results show, that although public transport is a very important way of travelling for seniors, its role decreases with higher age. Above the age of 65 years only a small fraction of seniors uses new communication technologies. This implies that smartphones as mobility aids are only suitable for the youngest group of seniors and for future, perhaps more technology-friendly generations.

  19. Site index curves for white fir in the southwestern United States developed using a guide curve method

    Treesearch

    Robert L. Mathiasen; William K. Olsen; Carleton B. Edminster

    2006-01-01

    Site index curves for white fir (Abies concolor) in Arizona, New Mexico, and southwestern Colorado were developed using height-age measurements and an estimated guide curve and 95% confidence intervals for individual predictions. The curves were developed using height-age data for 1,048 white firs from 263 study sites distributed across eight...

  20. [Age index and an interpretation of survivorship curves (author's transl)].

    PubMed

    Lohmann, W

    1977-01-01

    Clinical investigations showed that the age dependences of physiological functions do not show -- as generally assumed -- a linear increase with age, but an exponential one. Considering this result one can easily interpret the survivorship curve of a population (Gompertz plot). The only thing that is required is that the probability of death (death rate) is proportional to a function of ageing given by mu(t) = mu0 exp (alpha t). Considering survivorship curves resulting from annual death statistics and fitting them by suitable parameters, then the resulting alpha-values are in agreement with clinical data.

  1. The Chaotic Light Curves of Accreting Black Holes

    NASA Technical Reports Server (NTRS)

    Kazanas, Demosthenes

    2007-01-01

    We present model light curves for accreting Black Hole Candidates (BHC) based on a recently developed model of these sources. According to this model, the observed light curves and aperiodic variability of BHC are due to a series of soft photon injections at random (Poisson) intervals and the stochastic nature of the Comptonization process in converting these soft photons to the observed high energy radiation. The additional assumption of our model is that the Comptonization process takes place in an extended but non-uniform hot plasma corona surrounding the compact object. We compute the corresponding Power Spectral Densities (PSD), autocorrelation functions, time skewness of the light curves and time lags between the light curves of the sources at different photon energies and compare our results to observation. Our model reproduces the observed light curves well, in that it provides good fits to their overall morphology (as manifest by the autocorrelation and time skewness) and also to their PSDs and time lags, by producing most of the variability power at time scales 2 a few seconds, while at the same time allowing for shots of a few msec in duration, in accordance with observation. We suggest that refinement of this type of model along with spectral and phase lag information can be used to probe the structure of this class of high energy sources.

  2. An analysis on the environmental Kuznets curve of Chengdu

    NASA Astrophysics Data System (ADS)

    Gao, Zijian; Peng, Yue; Zhao, Yue

    2017-12-01

    In this paper based on the environmental and economic data of Chengdu from 2005 to 2014, the measurement models were established to analyze 3 kinds of environmental flow indicators and 4 kinds of environmental stock indicators to obtain their EKC evolution trajectories and characters. The results show that the relationship curve between the discharge of SO2 from industry and the GDP per capita is a positive U shape, just as the curve between discharge of COD from industry and the GDP per person. The relationship curve between the dust discharge from industry and the GDP per capita is an inverted N shape. In the central of the urban the relationship curve between the concentration of SO2 in the air and the GDP per person is a positive U shape. The relationship curves between the concentration of NO2 in the air and the GDP per person, between the concentration of the particulate matters and the GDP per person, and between the concentration of the fallen dusts and the GDP per person are fluctuating. So the EKC curves of the 7 kinds of environmental indicators are not accord with inverted U shape feature. In the development of this urban the environmental problems can’t be resolved only by economic growth. The discharge of industrial pollutants should be controlled to improve the atmospheric environmental quality and reduce the environmental risks.

  3. Pointwise regularity of parameterized affine zipper fractal curves

    NASA Astrophysics Data System (ADS)

    Bárány, Balázs; Kiss, Gergely; Kolossváry, István

    2018-05-01

    We study the pointwise regularity of zipper fractal curves generated by affine mappings. Under the assumption of dominated splitting of index-1, we calculate the Hausdorff dimension of the level sets of the pointwise Hölder exponent for a subinterval of the spectrum. We give an equivalent characterization for the existence of regular pointwise Hölder exponent for Lebesgue almost every point. In this case, we extend the multifractal analysis to the full spectrum. In particular, we apply our results for de Rham’s curve.

  4. Dissociative Recombination without a Curve Crossing

    NASA Technical Reports Server (NTRS)

    Guberman, Steven L.

    1994-01-01

    Ab initio calculations show that a curve crossing is not always needed for a high dissociative- recombination cross section. For HeH(+), in which no neutral states cross the ion potential curve, dissociative recombination is driven by the nuclear kinetic-energy operator on adiabatic potential curves. The kinetic-energy derivative operator allows for capture into repulsive curves that are outside of the classical turning points for the nuclear motion. The dominant dissociative route is the C (2)Sigma(+) state leading to H(n = 2) atoms. An analogous mechanism is proposed for the dissociative recombination of H3(+).

  5. Measuring Acceptance of Sleep Difficulties: The Development of the Sleep Problem Acceptance Questionnaire.

    PubMed

    Bothelius, Kristoffer; Jernelöv, Susanna; Fredrikson, Mats; McCracken, Lance M; Kaldo, Viktor

    2015-11-01

    Acceptance may be an important therapeutic process in sleep medicine, but valid psychometric instruments measuring acceptance related to sleep difficulties are lacking. The purpose of this study was to develop a measure of acceptance in insomnia, and to examine its factor structure as well as construct validity. In a cross-sectional design, a principal component analysis for item reduction was conducted on a first sample (A) and a confirmatory factor analysis on a second sample (B). Construct validity was tested on a combined sample (C). Questionnaire items were derived from a measure of acceptance in chronic pain, and data were gathered through screening or available from pretreatment assessments in four insomnia treatment trials, administered online, via bibliotherapy and in primary care. Adults with insomnia: 372 in sample A and 215 in sample B. Sample C (n = 820) included sample A and B with another 233 participants added. Construct validity was assessed through relations with established acceptance and sleep scales. The principal component analysis presented a two-factor solution with eight items, explaining 65.9% of the total variance. The confirmatory factor analysis supported the solution. Acceptance of sleep problems was more closely related to subjective symptoms and consequences of insomnia than to diary description of sleep, or to acceptance of general private events. The Sleep Problem Acceptance Questionnaire (SPAQ), containing the subscales "Activity Engagement" and "Willingness", is a valid tool to assess acceptance of insomnia. © 2015 Associated Professional Sleep Societies, LLC.

  6. Curve fitting methods for solar radiation data modeling

    NASA Astrophysics Data System (ADS)

    Karim, Samsul Ariffin Abdul; Singh, Balbir Singh Mahinder

    2014-10-01

    This paper studies the use of several type of curve fitting method to smooth the global solar radiation data. After the data have been fitted by using curve fitting method, the mathematical model of global solar radiation will be developed. The error measurement was calculated by using goodness-fit statistics such as root mean square error (RMSE) and the value of R2. The best fitting methods will be used as a starting point for the construction of mathematical modeling of solar radiation received in Universiti Teknologi PETRONAS (UTP) Malaysia. Numerical results indicated that Gaussian fitting and sine fitting (both with two terms) gives better results as compare with the other fitting methods.

  7. Curve fitting methods for solar radiation data modeling

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Karim, Samsul Ariffin Abdul, E-mail: samsul-ariffin@petronas.com.my, E-mail: balbir@petronas.com.my; Singh, Balbir Singh Mahinder, E-mail: samsul-ariffin@petronas.com.my, E-mail: balbir@petronas.com.my

    2014-10-24

    This paper studies the use of several type of curve fitting method to smooth the global solar radiation data. After the data have been fitted by using curve fitting method, the mathematical model of global solar radiation will be developed. The error measurement was calculated by using goodness-fit statistics such as root mean square error (RMSE) and the value of R{sup 2}. The best fitting methods will be used as a starting point for the construction of mathematical modeling of solar radiation received in Universiti Teknologi PETRONAS (UTP) Malaysia. Numerical results indicated that Gaussian fitting and sine fitting (both withmore » two terms) gives better results as compare with the other fitting methods.« less

  8. Determination of the human spine curve based on laser triangulation.

    PubMed

    Poredoš, Primož; Čelan, Dušan; Možina, Janez; Jezeršek, Matija

    2015-02-05

    The main objective of the present method was to automatically obtain a spatial curve of the thoracic and lumbar spine based on a 3D shape measurement of a human torso with developed scoliosis. Manual determination of the spine curve, which was based on palpation of the thoracic and lumbar spinous processes, was found to be an appropriate way to validate the method. Therefore a new, noninvasive, optical 3D method for human torso evaluation in medical practice is introduced. Twenty-four patients with confirmed clinical diagnosis of scoliosis were scanned using a specially developed 3D laser profilometer. The measuring principle of the system is based on laser triangulation with one-laser-plane illumination. The measurement took approximately 10 seconds at 700 mm of the longitudinal translation along the back. The single point measurement accuracy was 0.1 mm. Computer analysis of the measured surface returned two 3D curves. The first curve was determined by manual marking (manual curve), and the second was determined by detecting surface curvature extremes (automatic curve). The manual and automatic curve comparison was given as the root mean square deviation (RMSD) for each patient. The intra-operator study involved assessing 20 successive measurements of the same person, and the inter-operator study involved assessing measurements from 8 operators. The results obtained for the 24 patients showed that the typical RMSD between the manual and automatic curve was 5.0 mm in the frontal plane and 1.0 mm in the sagittal plane, which is a good result compared with palpatory accuracy (9.8 mm). The intra-operator repeatability of the presented method in the frontal and sagittal planes was 0.45 mm and 0.06 mm, respectively. The inter-operator repeatability assessment shows that that the presented method is invariant to the operator of the computer program with the presented method. The main novelty of the presented paper is the development of a new, non-contact method

  9. New Risk Curves for NHTSA's Brain Injury Criterion (BrIC): Derivations and Assessments.

    PubMed

    Laituri, Tony R; Henry, Scott; Pline, Kevin; Li, Guosong; Frankstein, Michael; Weerappuli, Para

    2016-11-01

    The National Highway Traffic Safety Administration (NHTSA) recently published a Request for Comments regarding a potential upgrade to the US New Car Assessment Program (US NCAP) - a star-rating program pertaining to vehicle crashworthiness. Therein, NHTSA (a) cited two metrics for assessing head risk: Head Injury Criterion (HIC15) and Brain Injury Criterion (BrIC), and (b) proposed to conduct risk assessment via its risk curves for those metrics, but did not prescribe a specific method for applying them. Recent studies, however, have indicated that the NHTSA risk curves for BrIC significantly overstate field-based head injury rates. Therefore, in the present three-part study, a new set of BrIC-based risk curves was derived, an overarching head risk equation involving risk curves for both BrIC and HIC15 was assessed, and some additional candidatepredictor- variable assessments were conducted. Part 1 pertained to the derivation. Specifically, data were pooled from various sources: Navy volunteers, amateur boxers, professional football players, simple-fall subjects, and racecar drivers. In total, there were 4,501 cases, with brain injury reported in 63. Injury outcomes were approximated on the Abbreviated Injury Scale (AIS). The statistical analysis was conducted subject to ordinal logistic regression analysis (OLR), such that the various levels of brain injury were cast as a function of BrIC. The resulting risk curves, with Goodman Kruksal Gamma=0.83, were significantly different than those from NHTSA. Part 2 pertained to the assessment relative to field data. Two perspectives were considered: "aggregate" (ΔV=0-56 km/h) and "point" (high-speed, regulatory focus). For the aggregate perspective, the new risk curves for BrIC were applied in field models pertaining to belted, mid-size, adult drivers in 11-1 o'clock, full-engagement frontal crashes in the National Automotive Sampling System (NASS, 1993-2014 calendar years). For the point perspective, BrIC data from tests

  10. Learning curve for laparoscopic Heller myotomy and Dor fundoplication for achalasia

    PubMed Central

    Omura, Nobuo; Tsuboi, Kazuto; Hoshino, Masato; Yamamoto, Seryung; Akimoto, Shunsuke; Masuda, Takahiro; Kashiwagi, Hideyuki; Yanaga, Katsuhiko

    2017-01-01

    Purpose Although laparoscopic Heller myotomy and Dor fundoplication (LHD) is widely performed to address achalasia, little is known about the learning curve for this technique. We assessed the learning curve for performing LHD. Methods Of the 514 cases with LHD performed between August 1994 and March 2016, the surgical outcomes of 463 cases were evaluated after excluding 50 cases with reduced port surgery and one case with the simultaneous performance of laparoscopic distal partial gastrectomy. A receiver operating characteristic (ROC) curve analysis was used to identify the cut-off value for the number of surgical experiences necessary to become proficient with LHD, which was defined as the completion of the learning curve. Results We defined the completion of the learning curve when the following 3 conditions were satisfied. 1) The operation time was less than 165 minutes. 2) There was no blood loss. 3) There was no intraoperative complication. In order to establish the appropriate number of surgical experiences required to complete the learning curve, the cut-off value was evaluated by using a ROC curve (AUC 0.717, p < 0.001). Finally, we identified the cut-off value as 16 surgical cases (sensitivity 0.706, specificity 0.646). Conclusion Learning curve seems to complete after performing 16 cases. PMID:28686640

  11. Dark Energy Survey Year 1 results: curved-sky weak lensing mass map

    NASA Astrophysics Data System (ADS)

    Chang, C.; Pujol, A.; Mawdsley, B.; Bacon, D.; Elvin-Poole, J.; Melchior, P.; Kovács, A.; Jain, B.; Leistedt, B.; Giannantonio, T.; Alarcon, A.; Baxter, E.; Bechtol, K.; Becker, M. R.; Benoit-Lévy, A.; Bernstein, G. M.; Bonnett, C.; Busha, M. T.; Rosell, A. Carnero; Castander, F. J.; Cawthon, R.; da Costa, L. N.; Davis, C.; De Vicente, J.; DeRose, J.; Drlica-Wagner, A.; Fosalba, P.; Gatti, M.; Gaztanaga, E.; Gruen, D.; Gschwend, J.; Hartley, W. G.; Hoyle, B.; Huff, E. M.; Jarvis, M.; Jeffrey, N.; Kacprzak, T.; Lin, H.; MacCrann, N.; Maia, M. A. G.; Ogando, R. L. C.; Prat, J.; Rau, M. M.; Rollins, R. P.; Roodman, A.; Rozo, E.; Rykoff, E. S.; Samuroff, S.; Sánchez, C.; Sevilla-Noarbe, I.; Sheldon, E.; Troxel, M. A.; Varga, T. N.; Vielzeuf, P.; Vikram, V.; Wechsler, R. H.; Zuntz, J.; Abbott, T. M. C.; Abdalla, F. B.; Allam, S.; Annis, J.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Burke, D. L.; Kind, M. Carrasco; Carretero, J.; Crocce, M.; Cunha, C. E.; D'Andrea, C. B.; Desai, S.; Diehl, H. T.; Dietrich, J. P.; Doel, P.; Estrada, J.; Neto, A. Fausti; Fernandez, E.; Flaugher, B.; Frieman, J.; García-Bellido, J.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; James, D. J.; Jeltema, T.; Johnson, M. W. G.; Johnson, M. D.; Kent, S.; Kirk, D.; Krause, E.; Kuehn, K.; Kuhlmann, S.; Lahav, O.; Li, T. S.; Lima, M.; March, M.; Martini, P.; Menanteau, F.; Miquel, R.; Mohr, J. J.; Neilsen, E.; Nichol, R. C.; Petravick, D.; Plazas, A. A.; Romer, A. K.; Sako, M.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Smith, M.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Tarle, G.; Thomas, D.; Tucker, D. L.; Walker, A. R.; Wester, W.; Zhang, Y.

    2018-04-01

    We construct the largest curved-sky galaxy weak lensing mass map to date from the DES first-year (DES Y1) data. The map, about 10 times larger than the previous work, is constructed over a contiguous ≈1500 deg2, covering a comoving volume of ≈10 Gpc3. The effects of masking, sampling, and noise are tested using simulations. We generate weak lensing maps from two DES Y1 shear catalogues, METACALIBRATION and IM3SHAPE, with sources at redshift 0.2 < z < 1.3, and in each of four bins in this range. In the highest signal-to-noise map, the ratio between the mean signal to noise in the E-mode map and the B-mode map is ˜1.5 (˜2) when smoothed with a Gaussian filter of σG = 30 (80) arcmin. The second and third moments of the convergence κ in the maps are in agreement with simulations. We also find no significant correlation of κ with maps of potential systematic contaminants. Finally, we demonstrate two applications of the mass maps: (1) cross-correlation

  12. Significance of peak height velocity as a predictive factor for curve progression in patients with idiopathic scoliosis

    PubMed Central

    2015-01-01

    Background Much attention has been paid to peak height velocity (PHV) as a possible predictor of curve progression in patients with idiopathic scoliosis (IS). The aim of this study was to analyze the relationship between the magnitude of the Cobb angle at PHV and scoliosis progression, defined as having surgery prior to skeletal maturity in female patients with IS. Methods A retrospective review identified 56 skeletally immature female IS patients who were followed until maturity. The mean age and the mean pubertal status at the initial visit were 10 years and 24 months before menarche respectively, with a follow-up period of 5 years. They were divided into two groups: non-surgery group (NS) and surgery group (S), depending on their treatment method in use at the final follow-up visit. Surgery group was defined as an ultimately having surgery due to Cobb angle greater than 45 degrees prior to skeletal maturity regardless of conservative management. Height measurements were recorded at each visit; height velocity was calculated as the height change, in cm, divided by the time interval, in years. The PHV, chronological age at PHV (APHV), height at PHV (HPHV), and final height (FH) were determined for each group. In patients with Cobb angle greater than 30 degrees, the corrected height was calculated by Kono formula and corrected height velocity values were provided. The sensitivity, specificity, and area under the curve (AUC) of the receiver-operating -characteristic (ROC) analysis were calculated to predict spinal curve progression for various Cobb-angle cutoff values at PHV. Results The corrected PHV had a mean value of 8.5 and 8.9 cm/year in the NS-group and S-group, respectively. The APHV was 11.9 and 11 years, the corrected HPHV was 152.9, and 149.3 cm, and the corrected FH was 159.9 and 159.3 cm, respectively. When a Cobb angle of 31.5 degrees was at PHV, ROC analysis revealed 78% sensitivity, 82% specificity, and an AUC of 0.93, acceptable values for curve

  13. Common Visual Preference for Curved Contours in Humans and Great Apes.

    PubMed

    Munar, Enric; Gómez-Puerto, Gerardo; Call, Josep; Nadal, Marcos

    2015-01-01

    Among the visual preferences that guide many everyday activities and decisions, from consumer choices to social judgment, preference for curved over sharp-angled contours is commonly thought to have played an adaptive role throughout human evolution, favoring the avoidance of potentially harmful objects. However, because nonhuman primates also exhibit preferences for certain visual qualities, it is conceivable that humans' preference for curved contours is grounded on perceptual and cognitive mechanisms shared with extant nonhuman primate species. Here we aimed to determine whether nonhuman great apes and humans share a visual preference for curved over sharp-angled contours using a 2-alternative forced choice experimental paradigm under comparable conditions. Our results revealed that the human group and the great ape group indeed share a common preference for curved over sharp-angled contours, but that they differ in the manner and magnitude with which this preference is expressed behaviorally. These results suggest that humans' visual preference for curved objects evolved from earlier primate species' visual preferences, and that during this process it became stronger, but also more susceptible to the influence of higher cognitive processes and preference for other visual features.

  14. Acceptability of formulations and application methods for vaginal microbicides among drug-involved women: results of product trials in three cities.

    PubMed

    Hammett, T M; Mason, T H; Joanis, C L; Foster, S E; Harmon, P; Robles, R R; Finlinson, H A; Feudo, R; Vining-Bethea, S; Jeter, G; Mayer, K H; Doherty-Iddings, P; Seage, G R

    2000-02-01

    Female-controlled methods of HIV prevention, such as vaginal microbicides, are urgently needed, particularly among drug-involved women. Acceptability research is critical to product development. To assess the acceptability of forms and application methods for future microbicides. Eighty-four drug-involved women were introduced in groups to three lubricant products, asked to try each for 3 weeks, and scheduled for individual follow-up interviews. Participants and their partners felt positive about the products, and expressed willingness to use microbicides if they were shown to be effective against HIV. Women agreed on product characteristics that influenced their reactions (e.g. ease of insertion, degree of "messiness"), but often disagreed on whether their reactions to these characteristics were positive or negative. Development of acceptable and effective HIV-prevention products depends on understanding the interaction between characteristics of the products and the characteristics and perceptions of women. Levels of sexual risk and acceptability factors based on drug-use patterns, race and ethnicity, culture, age, and types and attitudes of male partners suggest that a "one size fits all" approach will not win broad acceptance among drug-involved women.

  15. College Student Invulnerability Beliefs and HIV Vaccine Acceptability

    ERIC Educational Resources Information Center

    Ravert, Russell D.; Zimet, Gregory D.

    2009-01-01

    Objective: To examine behavioral history, beliefs, and vaccine characteristics as predictors of HIV vaccine acceptability. Methods: Two hundred forty-five US under graduates were surveyed regarding their sexual history, risk beliefs, and likelihood of accepting hypothetical HIV vaccines. Results: Multivariate regression analysis indicated that…

  16. [Nurses' Innovation Acceptance of Barcode Technology].

    PubMed

    Cheng, Hui-Ping; Lee, Ting-Ting; Liu, Chieh-Yu; Hou, I-Ching

    2016-04-01

    Healthcare organizations have increasingly adopted barcode technology to improve care quality and work efficiency. Barcode technology is simple to use, so it is frequently used in patient identification, medication administration, and specimen collection processes. This study used a technology acceptance model and innovation diffusion theory to explore the innovation acceptance of barcode technology by nurses. The data were collected using a structured questionnaire with open-ended questions that was based on the technology acceptance model and innovation diffusion theory. The questionnaire was distributed to and collected from 200 nurses from March to May 2014. Data on laboratory reporting times and specimen rejection rates were collected as well. Variables that were found to have a significant relationship (p<.001) with innovation acceptance included (in order of importance): perceived usefulness (r=.722), perceived ease of use (r=.720), observability (r=.579), compatibility (r=.364), and trialability (r=.344). N-level nurses demonstrated higher acceptance than their N1 and N2 level peers (F=3.95, p<.05). Further, the mean laboratory reporting time decreased 109 minutes (t=10.03, p<.05) and the mean specimen rejection rate decreased from 2.18% to 0.28%. The results revealed that barcode technology has been accepted by nurses and that this technology effectively decreases both laboratory reporting times and specimen rejection rates. However, network speed and workflow should be further improved in order to benefit clinical practice.

  17. Microlensing results toward the galactic bulge, theory of fitting blended light curves, and discussion of weak lensing corrections

    NASA Astrophysics Data System (ADS)

    Thomas, Christian L.

    2006-06-01

    Analysis and results (Chapters 2-5) of the full 7 year Macho Project dataset toward the Galactic bulge are presented. A total of 450 high quality, relatively large signal-to-noise ratio, events are found, including several events exhibiting exotic effects, and lensing events on possible Sagittarius dwarf galaxy stars. We examine the problem of blending in our sample and conclude that the subset of red clump giants are minimally blended. Using 42 red clump giant events near the Galactic center we calculate the optical depth toward the Galactic bulge to be t = [Special characters omitted.] × 10 -6 at ( l, b ) = ([Special characters omitted.] ) with a gradient of (1.06 ± 0.71) × 10 -6 deg -1 in latitude, and (0.29±0.43) × 10 -6 deg -1 in longitude, bringing measurements into consistency with the models for the first time. In Chapter 6 we reexamine the usefulness of fitting blended light-curve models to microlensing photometric data. We find agreement with previous workers (e.g. Wozniak & Paczynski) that this is a difficult proposition because of the degeneracy of blend fraction with other fit parameters. We show that follow-up observations at specific points along the light curve (peak region and wings) of high magnification events are the most helpful in removing degeneracies. We also show that very small errors in the baseline magnitude can result in problems in measuring the blend fraction, and study the importance of non- Gaussian errors in the fit results. The biases and skewness in the distribution of the recovered blend fraction is discussed. We also find a new approximation formula relating the blend fraction and the unblended fit parameters to the underlying event duration needed to estimate microlensing optical depth. In Chapter 7 we present work-in-progress on the possibility of correcting standard candle luminosities for the magnification due to weak lensing. We consider the importance of lenses in different mass ranges and look at the contribution

  18. Asymptotic Properties of the Sequential Empirical ROC, PPV and NPV Curves Under Case-Control Sampling.

    PubMed

    Koopmeiners, Joseph S; Feng, Ziding

    2011-01-01

    The receiver operating characteristic (ROC) curve, the positive predictive value (PPV) curve and the negative predictive value (NPV) curve are three measures of performance for a continuous diagnostic biomarker. The ROC, PPV and NPV curves are often estimated empirically to avoid assumptions about the distributional form of the biomarkers. Recently, there has been a push to incorporate group sequential methods into the design of diagnostic biomarker studies. A thorough understanding of the asymptotic properties of the sequential empirical ROC, PPV and NPV curves will provide more flexibility when designing group sequential diagnostic biomarker studies. In this paper we derive asymptotic theory for the sequential empirical ROC, PPV and NPV curves under case-control sampling using sequential empirical process theory. We show that the sequential empirical ROC, PPV and NPV curves converge to the sum of independent Kiefer processes and show how these results can be used to derive asymptotic results for summaries of the sequential empirical ROC, PPV and NPV curves.

  19. Asymptotic Properties of the Sequential Empirical ROC, PPV and NPV Curves Under Case-Control Sampling

    PubMed Central

    Koopmeiners, Joseph S.; Feng, Ziding

    2013-01-01

    The receiver operating characteristic (ROC) curve, the positive predictive value (PPV) curve and the negative predictive value (NPV) curve are three measures of performance for a continuous diagnostic biomarker. The ROC, PPV and NPV curves are often estimated empirically to avoid assumptions about the distributional form of the biomarkers. Recently, there has been a push to incorporate group sequential methods into the design of diagnostic biomarker studies. A thorough understanding of the asymptotic properties of the sequential empirical ROC, PPV and NPV curves will provide more flexibility when designing group sequential diagnostic biomarker studies. In this paper we derive asymptotic theory for the sequential empirical ROC, PPV and NPV curves under case-control sampling using sequential empirical process theory. We show that the sequential empirical ROC, PPV and NPV curves converge to the sum of independent Kiefer processes and show how these results can be used to derive asymptotic results for summaries of the sequential empirical ROC, PPV and NPV curves. PMID:24039313

  20. Growth curve for Propionibacterium acnes.

    PubMed

    Hall, G S; Pratt-Rippin, K; Meisler, D M; Washington, J A; Roussel, T J; Miller, D

    1994-06-01

    We established growth curves for Propionibacterium acnes isolates recovered from eyes with chronic postoperative endophthalmitis. The growth curve plotted the average of the duplicate bacterial concentration against time. The generation time for P. acnes calculated from the growth curves was approximately 5.1 hours. The growth of P. acnes is slower than other anaerobic bacteria. This may account for its delayed appearance in culture of ocular specimens. It may also explain treatment failure if the concentration of an antibiotic injected into the vitreous does not remain at an effective level during the critical replicative phase of the organism.

  1. Demand curves for hypothetical cocaine in cocaine-dependent individuals.

    PubMed

    Bruner, Natalie R; Johnson, Matthew W

    2014-03-01

    Drug purchasing tasks have been successfully used to examine demand for hypothetical consumption of abused drugs including heroin, nicotine, and alcohol. In these tasks, drug users make hypothetical choices whether to buy drugs, and if so, at what quantity, at various potential prices. These tasks allow for behavioral economic assessment of that drug's intensity of demand (preferred level of consumption at extremely low prices) and demand elasticity (sensitivity of consumption to price), among other metrics. However, a purchasing task for cocaine in cocaine-dependent individuals has not been investigated. This study examined a novel Cocaine Purchasing Task and the relation between resulting demand metrics and self-reported cocaine use data. Participants completed a questionnaire assessing hypothetical purchases of cocaine units at prices ranging from $0.01 to $1,000. Demand curves were generated from responses on the Cocaine Purchasing Task. Correlations compared metrics from the demand curve to measures of real-world cocaine use. Group and individual data were well modeled by a demand curve function. The validity of the Cocaine Purchasing Task was supported by a significant correlation between the demand curve metrics of demand intensity and O max (determined from Cocaine Purchasing Task data) and self-reported measures of cocaine use. Partial correlations revealed that after controlling for demand intensity, demand elasticity and the related measure, P max, were significantly correlated with real-world cocaine use. Results indicate that the Cocaine Purchasing Task produces orderly demand curve data, and that these data relate to real-world measures of cocaine use.

  2. Curved and conformal high-pressure vessel

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Croteau, Paul F.; Kuczek, Andrzej E.; Zhao, Wenping

    A high-pressure vessel is provided. The high-pressure vessel may comprise a first chamber defined at least partially by a first wall, and a second chamber defined at least partially by the first wall. The first chamber and the second chamber may form a curved contour of the high-pressure vessel. A modular tank assembly is also provided, and may comprise a first mid tube having a convex geometry. The first mid tube may be defined by a first inner wall, a curved wall extending from the first inner wall, and a second inner wall extending from the curved wall. The firstmore » inner wall may be disposed at an angle relative to the second inner wall. The first mid tube may further be defined by a short curved wall opposite the curved wall and extending from the second inner wall to the first inner wall.« less

  3. Virtual knotting in proteins and other open curves

    NASA Astrophysics Data System (ADS)

    Alexander, Keith; Taylor, Alexander; Dennis, Mark

    Long filaments naturally knot, from string to long-chain molecules. Knotting in a filament affects its properties, and may be very stable or disappear under slight manipulation. Knotting has been identified in protein backbones for which these mechanical constraints are of fundamental importance to their function, although they are open curves in which knots are not mathematically well defined; knotting can only be identified by closing the ends of the chain. We introduce a new method for resolving knotting in open curves using virtual knots, a wider class of topological objects that do not use a classical closure, capturing the topological ambiguity of open curves. Having analysed all proteins in the Protein Data Bank by this new scheme, we recover and extend previous knotting results, and identify topological interest in some new cases. The statistics of virtual knots in proteins are compared with those of Hamiltonian subchains on cubic lattices, identifying a regime of open curves in which the virtual knotting description is likely to be important. This work was supported by the Leverhulme Trust Programme Grant ``Scientific Properties of Complex Knots'' and the EPSRC.

  4. Perceptions of acceptable conducts by university students.

    PubMed

    Marques, Dora Nazaré; Macedo, António Filipe

    2016-01-01

    To determine perceptions of acceptable conducts amongst under and postgraduate optometry students and to compare them with students from other disciplines. Students (under/postgraduate) of optometry (n=156) and other courses (n=54) from University of Minho participated in a voluntary online questionnaire about perception of conducts, classifying as acceptable or unacceptable 15 academic or professional scenarios. 210 questionnaires were analyzed. Differences in perceptions were found between optometry under and postgraduates in scenario 5, Chi-square(2,156)=4.3, p=0.038, and scenario 7, Chi-square(2,156)=7.0, p=0.008 (both with cheating more acceptable for postgrads). Differences between under and postgraduates from other courses were found in scenario 9 (taking supplies from classroom more acceptable for undergrads), Chi-square(1,54)=5.0, p=0.025, and scenario 14 (forging a signature more acceptable for postgrads), Chi-square(1,54)=3.9, p=0.046. Differences between optometry and other courses undergraduates were observed in scenario 2 (plagiarism more acceptable for optometry undergrads), Chi-square(1,154)=8.3, p=0.004 and scenario 9 (taking supplies from classroom more acceptable for other undergrads), chi-square(1,54)=7.8, p=0.005. Differences between optometry and other courses postgraduates were observed in scenario 7, Chi-square(1,56)=5.8, p=0.016, scenario 10 (both with cheating more acceptable for optometry postgrads), chi-square(1,54)=8.1, p=0.004 and scenario 14 (forging a signature more acceptable for other postgrads), Chi-square(1,54)=6.1, p=0.026. Academic misconducts were mainly considered more acceptable than professional misconducts. Our results show that perceptions of acceptable conducts amongst optometry students are not very different from other students, and, against our initial prediction, do not show a general change in misconduct perception when students become more mature. Universities should pay more attention to this problem and take

  5. The average receiver operating characteristic curve in multireader multicase imaging studies

    PubMed Central

    Samuelson, F W

    2014-01-01

    Objective: In multireader, multicase (MRMC) receiver operating characteristic (ROC) studies for evaluating medical imaging systems, the area under the ROC curve (AUC) is often used as a summary metric. Owing to the limitations of AUC, plotting the average ROC curve to accompany the rigorous statistical inference on AUC is recommended. The objective of this article is to investigate methods for generating the average ROC curve from ROC curves of individual readers. Methods: We present both a non-parametric method and a parametric method for averaging ROC curves that produce a ROC curve, the area under which is equal to the average AUC of individual readers (a property we call area preserving). We use hypothetical examples, simulated data and a real-world imaging data set to illustrate these methods and their properties. Results: We show that our proposed methods are area preserving. We also show that the method of averaging the ROC parameters, either the conventional bi-normal parameters (a, b) or the proper bi-normal parameters (c, da), is generally not area preserving and may produce a ROC curve that is intuitively not an average of multiple curves. Conclusion: Our proposed methods are useful for making plots of average ROC curves in MRMC studies as a companion to the rigorous statistical inference on the AUC end point. The software implementing these methods is freely available from the authors. Advances in knowledge: Methods for generating the average ROC curve in MRMC ROC studies are formally investigated. The area-preserving criterion we defined is useful to evaluate such methods. PMID:24884728

  6. Calibration of hydrological models using flow-duration curves

    NASA Astrophysics Data System (ADS)

    Westerberg, I. K.; Guerrero, J.-L.; Younger, P. M.; Beven, K. J.; Seibert, J.; Halldin, S.; Freer, J. E.; Xu, C.-Y.

    2011-07-01

    The degree of belief we have in predictions from hydrologic models will normally depend on how well they can reproduce observations. Calibrations with traditional performance measures, such as the Nash-Sutcliffe model efficiency, are challenged by problems including: (1) uncertain discharge data, (2) variable sensitivity of different performance measures to different flow magnitudes, (3) influence of unknown input/output errors and (4) inability to evaluate model performance when observation time periods for discharge and model input data do not overlap. This paper explores a calibration method using flow-duration curves (FDCs) to address these problems. The method focuses on reproducing the observed discharge frequency distribution rather than the exact hydrograph. It consists of applying limits of acceptability for selected evaluation points (EPs) on the observed uncertain FDC in the extended GLUE approach. Two ways of selecting the EPs were tested - based on equal intervals of discharge and of volume of water. The method was tested and compared to a calibration using the traditional model efficiency for the daily four-parameter WASMOD model in the Paso La Ceiba catchment in Honduras and for Dynamic TOPMODEL evaluated at an hourly time scale for the Brue catchment in Great Britain. The volume method of selecting EPs gave the best results in both catchments with better calibrated slow flow, recession and evaporation than the other criteria. Observed and simulated time series of uncertain discharges agreed better for this method both in calibration and prediction in both catchments. An advantage with the method is that the rejection criterion is based on an estimation of the uncertainty in discharge data and that the EPs of the FDC can be chosen to reflect the aims of the modelling application, e.g. using more/less EPs at high/low flows. While the method appears less sensitive to epistemic input/output errors than previous use of limits of acceptability applied

  7. Peace, Equanimity, and Acceptance in the Cancer Experience (PEACE): Validation of a scale to assess acceptance and struggle with terminal illness

    PubMed Central

    Mack, Jennifer W.; Nilsson, Matthew; Balboni, Tracy; Friedlander, Robert J.; Block, Susan D.; Trice, Elizabeth; Prigerson, Holly G.

    2013-01-01

    Objectives The role of emotional acceptance of a terminal illness in end-of-life (EOL) care is not known. We developed a measure of peaceful acceptance at the EOL, and evaluated the role of peaceful acceptance in EOL decision-making and care. Methods We developed the Peace, Equanimity, and Acceptance in the Cancer Experience (PEACE) questionnaire to measure the extent to which patients with advanced cancer feel a sense of peaceful acceptance of their terminal illness. The scale was administered to 160 advanced cancer patients along with measures of other attributes hypothesized to be related to acceptance, including cognitive acceptance of terminal illness. EOL outcomes in 56 patients who died during the study were also examined. Results The 12-item PEACE questionnaire had two subscales: a 7-item Struggle with Illness (Cronbach's α =.81) and a 5-item Peaceful Acceptance (α = .78) subscale. Both subscales were associated with patients’ self-reported peacefulness (r=.66 for acceptance, P<.0001; r=−.37 for struggle, P<.0001.) Struggle with Illness scores were associated with cognitive terminal illness acknowledgement (mean scores 14.9 versus 12.4, P=.001) and some aspects of advance care planning (living will or health care proxy, mean scores 13.9 versus 11.5, P=.02). In addition, among patients who had died, use of a feeding tube at the EOL was inversely associated with Peaceful Acceptance (P=.015). Conclusion The PEACE questionnaire is a valid and reliable measure of Peaceful Acceptance and Struggle with Illness. Scores are associated with some choices for EOL care among patients with advanced cancer. PMID:18429006

  8. Variation in learning curves and competence for ERCP among advanced endoscopy trainees by using cumulative sum analysis.

    PubMed

    Wani, Sachin; Hall, Matthew; Wang, Andrew Y; DiMaio, Christopher J; Muthusamy, V Raman; Keswani, Rajesh N; Brauer, Brian C; Easler, Jeffrey J; Yen, Roy D; El Hajj, Ihab; Fukami, Norio; Ghassemi, Kourosh F; Gonzalez, Susana; Hosford, Lindsay; Hollander, Thomas G; Wilson, Robert; Kushnir, Vladimir M; Ahmad, Jawad; Murad, Faris; Prabhu, Anoop; Watson, Rabindra R; Strand, Daniel S; Amateau, Stuart K; Attwell, Augustin; Shah, Raj J; Early, Dayna; Edmundowicz, Steven A; Mullady, Daniel

    2016-04-01

    There are limited data on learning curves and competence in ERCP. By using a standardized data collection tool, we aimed to prospectively define learning curves and measure competence among advanced endoscopy trainees (AETs) by using cumulative sum (CUSUM) analysis. AETs were evaluated by attending endoscopists starting with the 26th hands-on ERCP examination and then every ERCP examination during the 12-month training period. A standardized ERCP competency assessment tool (using a 4-point scoring system) was used to grade the examination. CUSUM analysis was applied to produce learning curves for individual technical and cognitive components of ERCP performance (success defined as a score of 1, acceptable and unacceptable failures [p1] of 10% and 20%, respectively). Sensitivity analyses varying p1 and by using a less-stringent definition of success were performed. Five AETs were included with a total of 1049 graded ERCPs (mean ± SD, 209.8 ± 91.6/AET). The majority of cases were performed for a biliary indication (80%). The overall and native papilla allowed cannulation times were 3.1 ± 3.6 and 5.7 ± 4, respectively. Overall learning curves demonstrated substantial variability for individual technical and cognitive endpoints. Although nearly all AETs achieved competence in overall cannulation, none achieved competence for cannulation in cases with a native papilla. Sensitivity analyses increased the proportion of AETs who achieved competence. This study demonstrates that there is substantial variability in ERCP learning curves among AETs. A specific case volume does not ensure competence, especially for native papilla cannulation. Copyright © 2016 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

  9. Consumer Acceptance of Dry Dog Food Variations.

    PubMed

    Di Donfrancesco, Brizio; Koppel, Kadri; Swaney-Stueve, Marianne; Chambers, Edgar

    2014-06-16

    The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog's liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner's overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products.

  10. RF Curves for Extraction from the Accumulator

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McGinnis, Dav; /Fermilab

    2002-03-10

    Since the start of Run IIa, the RF curves for the extraction process from the Accumulator have been based on an algorithm described in Pbar Note 636. There are a number of problems with this procedure that result in a dilution of the longitudinal phase space of the extracted beam. The procedure consists of a number of steps in which the frequency curve during each process is a linear time ramp. For a constant bend field, the synchronous phase angle is given as: {Lambda} = sin({phi}{sub s}) = -h/{eta} (1/f{sub rf}){sup 2}df{sub rf}/dt/qV/pc where h is the harmonic number ofmore » the RF. Equation (1) shows that if the frequency curve consists of a number of linear time ramps with different slopes, there will be discontinuities in the synchronous phase. These discontinuities in the synchronous phase will lead to dipole oscillations of the beam in the RF bucket. The discontinuities observed for the present RF curves are about 10 degrees. In the procedure outlined in Pbar Note 636, the RF bucket is formed on the high energy edge of the rectangular momentum distribution. As the RF bucket is pulled away from the core, it is also programmed to increase in area. If the distribution is not perfectly rectangular, or if the bucket is not formed at the edge of the distribution, the growing bucket will gather up more particles at the edges of the bucket resulting in a substantial increase of longitudinal emittance. Finally, it is fairly difficult to prepare a rectangular momentum distribution and keep it rectangular for extended periods of time. Once the rectangular distribution is prepared, the core momentum cooling must be turned off. If there is a delay in the extraction process, the sharp edges of the rectangular distribution will soon diffuse. With the momentum cooling disabled, the longitudinal emittance of the core will grow resulting in larger longitudinal emittances for the extracted beam.« less

  11. Acceptance and Utilization of Technology (UTAUT) as a Method of Technology Acceptance Model of Mitigation Disaster Website

    NASA Astrophysics Data System (ADS)

    Siswanto, T.; Shofiati, R.; Hartini, H.

    2018-01-01

    www.mitigasi-bencana.com as a knowledge management website created based on survey results in April-July 2014 in East Java and Central Java provinces, indicates a gap between the expectations and reality that exist in the services provided by the regional disaster management agency. Based on condition analysis, the gaps that occur can be reduced if the community has the understanding and knowledge of adequate disaster mitigation. The problem that arises later is whether the chosen technology solution is appropriate and acceptable to the public? The methodology used in this study using the Technology Acceptance Model development is the Unified Theory of Acceptance and Utilization of Technology (UTAUT). Feedback obtained from respondents KarangTaruna youth SelogedongBantul, www.mitigasi-bencana.com can be accepted by the respondents, but from processed data is obtained only UTAUT hypotheses on the relationship dimension eligible for Social Expectancy on the Attitude toward technology, which means the higher the perception of the Social Expectancy, the higher the perception of the Attitude toward technology. Because www.mitigasi-bencana.com is new socialized so that society still need time to explore content information and knowledge contained therein. To be accepted by user, a knowledge management application must prepare various aspects of Performance Expectancy, Effort Expectancy, Social Factors, Facilitating Conditions and Attitude.

  12. Numerical study of turbulent secondary flows in curved ducts

    NASA Technical Reports Server (NTRS)

    Hur, N.; Thangam, S.; Speziale, C. G.

    1990-01-01

    The pressure driven, fully-developed turbulent flow of an incompressible viscous fluid in curved ducts of square-section is studied numerically by making use of a finite volume method. A nonlinear Kappa - Iota model is used to represent the turbulence. The results for both straight and curved ducts are presented. For the case of fully-developed turbulent flow in straight and curved ducts, the secondary flow is characterized by an eight-vortex structure for which the computed flowfield is shown to be in good agreement with available experimental data. The introduction of moderate curvature is shown to cause a substantial increase in the strength of the secondary flow and to change the secondary flow pattern to either a double-vortex or a four-vortex configuration.

  13. GERLUMPH Data Release 2: 2.5 Billion Simulated Microlensing Light Curves

    NASA Astrophysics Data System (ADS)

    Vernardos, G.; Fluke, C. J.; Bate, N. F.; Croton, D.; Vohl, D.

    2015-04-01

    In the upcoming synoptic all-sky survey era of astronomy, thousands of new multiply imaged quasars are expected to be discovered and monitored regularly. Light curves from the images of gravitationally lensed quasars are further affected by superimposed variability due to microlensing. In order to disentangle the microlensing from the intrinsic variability of the light curves, the time delays between the multiple images have to be accurately measured. The resulting microlensing light curves can then be analyzed to reveal information about the background source, such as the size of the quasar accretion disk. In this paper we present the most extensive and coherent collection of simulated microlensing light curves; we have generated \\gt 2.5 billion light curves using the GERLUMPH high resolution microlensing magnification maps. Our simulations can be used to train algorithms to measure lensed quasar time delays, plan future monitoring campaigns, and study light curve properties throughout parameter space. Our data are openly available to the community and are complemented by online eResearch tools, located at http://gerlumph.swin.edu.au.

  14. Lorenz curves in a new science-funding model

    NASA Astrophysics Data System (ADS)

    Huang, Ding-wei

    2017-12-01

    We propose an agent-based model to theoretically and systematically explore the implications of a new approach to fund science, which has been suggested recently by J. Bollen et al.[?] We introduce various parameters and examine their effects. The concentration of funding is shown by the Lorenz curve and the Gini coefficient. In this model, all scientists are treated equally and follow the well-intended regulations. All scientists give a fixed ratio of their funding to others. The fixed ratio becomes an upper bound for the Gini coefficient. We observe two distinct regimes in the parameter space: valley and plateau. In the valley regime, the fluidity of funding is significant. The Lorenz curve is smooth. The Gini coefficient is well below the upper bound. The funding distribution is the desired result. In the plateau regime, the cumulative advantage is significant. The Lorenz curve has a sharp turn. The Gini coefficient saturates to the upper bound. The undue concentration of funding happens swiftly. The funding distribution is the undesired results, where a minority of scientists take the majority of funding. Phase transitions between these two regimes are discussed.

  15. 28 CFR 549.65 - Refusal to accept treatment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Refusal to accept treatment. 549.65 Section 549.65 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT MEDICAL SERVICES Hunger Strikes, Inmate § 549.65 Refusal to accept treatment. (a) When, as a result of...

  16. Investigating Students' Usage and Acceptance of Electronic Books

    ERIC Educational Resources Information Center

    Sieche, Susan; Krey, Birte; Bastiaens, Theo

    2013-01-01

    The purpose of this study is to investigate students' usage and acceptance of electronic books. Factors correlating with students' attitude towards e-books were examined using the Technology Acceptance Model (Davis, Bagozzi, & Warshaw 1989). A questionnaire was administered online for students at University of Hagen. Results indicate that…

  17. Design and analysis of grid stiffened fuselage panel with curved stiffeners

    NASA Astrophysics Data System (ADS)

    Hemanth, Bharath; Babu, N. C. Mahendra; Shivakumar, H. G.; Srikari, S.

    2018-04-01

    Designing and analyzing grid stiffened panel to understand the effect of stiffeners on stiffness of the panel is crucial in designing grid stiffened cylinder for fuselage application. Traditionally only straight stiffeners were used due to limited manufacturing capabilities and in recent years GSS with curved stiffeners have become a reality. The present work is on flat grid stiffened panel and the focus is to realize the change in stiffness by converting straight stiffeners in an isogrid panel to curved stiffeners. An isogrid stiffened panel is identified from literature for which experimental results were available and was considered for replacing straight stiffeners with curved stiffeners. Defining and designing the curve for curved stiffeners which can be used to replace straight stiffeners in isogrid pattern is crucial. FE model of the grid stiffened fuselage panel with isogrid pattern identified from the literature for which experimental data was available was developed and evaluated for stiffness. For the same panel, curved grid pattern to enhance stiffness of the panel was designed following existing design procedure. FE model of the grid stiffened fuselage panel with designed curved stiffeners was developed and evaluated for stiffness. It is established that the stiffness of panel can be increased by minimum of 2.82% to maximum of 11.93% by using curved stiffeners of particular curvature as a replacement for straight stiffeners in isogrid pattern with a slight mass penalty.

  18. New configuration factors for curved surfaces

    NASA Astrophysics Data System (ADS)

    Cabeza-Lainez, Jose M.; Pulido-Arcas, Jesus A.

    2013-03-01

    Curved surfaces have not been thoroughly considered in radiative transfer analysis mainly due to the difficulties arisen in the integration process and perhaps because of the lack of spatial vision of the researchers. It is a fact, especially for architectural lighting, that when concave geometries appear inside a curved space, they are mostly avoided. In this way, a vast repertoire of significant forms is neglected and energy waste is evident. Starting from the properties of volumes enclosed by the minimum number of surfaces, the authors formulate, with little calculus, new simple laws, which enable them to discover a set of configuration factors for caps and various segments of the sphere. The procedure is subsequently extended to previously unimagined surfaces as the paraboloid, the ellipsoid or the cone. Appropriate combination of the said forms with right truncated cones produces several complex volumes, often used in architectural and engineering creations and whose radiative performance could not be accurately predicted for decades. To complete the research, a new method for determining interreflections in curved volumes is also presented. Radiative transfer simulation benefits from these findings, as the simplicity of the results has led the authors to create innovative software more efficient for design and evaluation and applicable to emerging fields like LED lighting.

  19. Low-discrepancy sampling of parametric surface using adaptive space-filling curves (SFC)

    NASA Astrophysics Data System (ADS)

    Hsu, Charles; Szu, Harold

    2014-05-01

    Space-Filling Curves (SFCs) are encountered in different fields of engineering and computer science, especially where it is important to linearize multidimensional data for effective and robust interpretation of the information. Examples of multidimensional data are matrices, images, tables, computational grids, and Electroencephalography (EEG) sensor data resulting from the discretization of partial differential equations (PDEs). Data operations like matrix multiplications, load/store operations and updating and partitioning of data sets can be simplified when we choose an efficient way of going through the data. In many applications SFCs present just this optimal manner of mapping multidimensional data onto a one dimensional sequence. In this report, we begin with an example of a space-filling curve and demonstrate how it can be used to find the most similarity using Fast Fourier transform (FFT) through a set of points. Next we give a general introduction to space-filling curves and discuss properties of them. Finally, we consider a discrete version of space-filling curves and present experimental results on discrete space-filling curves optimized for special tasks.

  20. Results from VDOT's pilot project using volumetric properties and asphalt content for acceptance of asphalt concrete.

    DOT National Transportation Integrated Search

    1995-01-01

    In 1994 the Virginia Department of Transportation (VDOT) developed a specification for the acceptance of asphalt concrete based largely on Marshall compacted volumetric properties of the mix. A copy of the Special Provision is shown in the Appendix. ...

  1. Anatomical curve identification

    PubMed Central

    Bowman, Adrian W.; Katina, Stanislav; Smith, Joanna; Brown, Denise

    2015-01-01

    Methods for capturing images in three dimensions are now widely available, with stereo-photogrammetry and laser scanning being two common approaches. In anatomical studies, a number of landmarks are usually identified manually from each of these images and these form the basis of subsequent statistical analysis. However, landmarks express only a very small proportion of the information available from the images. Anatomically defined curves have the advantage of providing a much richer expression of shape. This is explored in the context of identifying the boundary of breasts from an image of the female torso and the boundary of the lips from a facial image. The curves of interest are characterised by ridges or valleys. Key issues in estimation are the ability to navigate across the anatomical surface in three-dimensions, the ability to recognise the relevant boundary and the need to assess the evidence for the presence of the surface feature of interest. The first issue is addressed by the use of principal curves, as an extension of principal components, the second by suitable assessment of curvature and the third by change-point detection. P-spline smoothing is used as an integral part of the methods but adaptations are made to the specific anatomical features of interest. After estimation of the boundary curves, the intermediate surfaces of the anatomical feature of interest can be characterised by surface interpolation. This allows shape variation to be explored using standard methods such as principal components. These tools are applied to a collection of images of women where one breast has been reconstructed after mastectomy and where interest lies in shape differences between the reconstructed and unreconstructed breasts. They are also applied to a collection of lip images where possible differences in shape between males and females are of interest. PMID:26041943

  2. Asymmetry in Determinants of Running Speed During Curved Sprinting.

    PubMed

    Ishimura, Kazuhiro; Sakurai, Shinji

    2016-08-01

    This study investigates the potential asymmetries between inside and outside legs in determinants of curved running speed. To test these asymmetries, a deterministic model of curved running speed was constructed based on components of step length and frequency, including the distances and times of different step phases, takeoff speed and angle, velocities in different directions, and relative height of the runner's center of gravity. Eighteen athletes sprinted 60 m on the curved path of a 400-m track; trials were recorded using a motion-capture system. The variables were calculated following the deterministic model. The average speeds were identical between the 2 sides; however, the step length and frequency were asymmetric. In straight sprinting, there is a trade-off relationship between the step length and frequency; however, such a trade-off relationship was not observed in each step of curved sprinting in this study. Asymmetric vertical velocity at takeoff resulted in an asymmetric flight distance and time. The runners changed the running direction significantly during the outside foot stance because of the asymmetric centripetal force. Moreover, the outside leg had a larger tangential force and shorter stance time. These asymmetries between legs indicated the outside leg plays an important role in curved sprinting.

  3. Numerical Characterization of Piezoceramics Using Resonance Curves

    PubMed Central

    Pérez, Nicolás; Buiochi, Flávio; Brizzotti Andrade, Marco Aurélio; Adamowski, Julio Cezar

    2016-01-01

    Piezoelectric materials characterization is a challenging problem involving physical concepts, electrical and mechanical measurements and numerical optimization techniques. Piezoelectric ceramics such as Lead Zirconate Titanate (PZT) belong to the 6 mm symmetry class, which requires five elastic, three piezoelectric and two dielectric constants to fully represent the material properties. If losses are considered, the material properties can be represented by complex numbers. In this case, 20 independent material constants are required to obtain the full model. Several numerical methods have been used to adjust the theoretical models to the experimental results. The continuous improvement of the computer processing ability has allowed the use of a specific numerical method, the Finite Element Method (FEM), to iteratively solve the problem of finding the piezoelectric constants. This review presents the recent advances in the numerical characterization of 6 mm piezoelectric materials from experimental electrical impedance curves. The basic strategy consists in measuring the electrical impedance curve of a piezoelectric disk, and then combining the Finite Element Method with an iterative algorithm to find a set of material properties that minimizes the difference between the numerical impedance curve and the experimental one. Different methods to validate the results are also discussed. Examples of characterization of some common piezoelectric ceramics are presented to show the practical application of the described methods. PMID:28787875

  4. Numerical Characterization of Piezoceramics Using Resonance Curves.

    PubMed

    Pérez, Nicolás; Buiochi, Flávio; Brizzotti Andrade, Marco Aurélio; Adamowski, Julio Cezar

    2016-01-27

    Piezoelectric materials characterization is a challenging problem involving physical concepts, electrical and mechanical measurements and numerical optimization techniques. Piezoelectric ceramics such as Lead Zirconate Titanate (PZT) belong to the 6 mm symmetry class, which requires five elastic, three piezoelectric and two dielectric constants to fully represent the material properties. If losses are considered, the material properties can be represented by complex numbers. In this case, 20 independent material constants are required to obtain the full model. Several numerical methods have been used to adjust the theoretical models to the experimental results. The continuous improvement of the computer processing ability has allowed the use of a specific numerical method, the Finite Element Method (FEM), to iteratively solve the problem of finding the piezoelectric constants. This review presents the recent advances in the numerical characterization of 6 mm piezoelectric materials from experimental electrical impedance curves. The basic strategy consists in measuring the electrical impedance curve of a piezoelectric disk, and then combining the Finite Element Method with an iterative algorithm to find a set of material properties that minimizes the difference between the numerical impedance curve and the experimental one. Different methods to validate the results are also discussed. Examples of characterization of some common piezoelectric ceramics are presented to show the practical application of the described methods.

  5. The effect of pavement markings on driving behaviour in curves: a simulator study.

    PubMed

    Ariën, Caroline; Brijs, Kris; Vanroelen, Giovanni; Ceulemans, Wesley; Jongen, Ellen M M; Daniels, Stijn; Brijs, Tom; Wets, Geert

    2017-05-01

    This study investigates the effect of two pavement markings (transverse rumble strips (TRS) and a backward pointing herringbone pattern (HP)) on speed and lateral control in and nearby curves. Two real-world curves with strong indications of a safety problem were replicated as realistic as possible in the simulator. Results show that both speed and lateral control differ between the curves. These behavioural differences are probably due to curve-related dissimilarities with respect to geometric alignment, cross-sectional design and speed limit. TRS and HP both influenced mean speed and mean acceleration/deceleration but not lateral control. TRS generated an earlier and more stable speed reduction than HP which induced significant speed reductions along the curve. The TRS gives drivers more time to generate the right expectations about the upcoming curve. When accidents occur primarily near the curve entry, TRS is recommended. The HP has the potential to reduce accidents at the curve end. Practitioner Summary: Two pavement markings (transversal rumble strips and HP) nearby dangerous curves were investigated in the driving simulator. TRS generated an earlier and more stable speed reduction than HP which induced speed reductions along the curve. The TRS gives drivers more time to generate right expectations about the upcoming curve.

  6. 7 CFR 42.142 - Curve for obtaining Operating Characteristic (OC) curve information for skip lot sampling and...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... CONDITION OF FOOD CONTAINERS Miscellaneous § 42.142 Curve for obtaining Operating Characteristic (OC) curve...

  7. Automated Blazar Light Curves Using Machine Learning

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, Spencer James

    2017-07-27

    This presentation describes a problem and methodology pertaining to automated blazar light curves. Namely, optical variability patterns for blazars require the construction of light curves and in order to generate the light curves, data must be filtered before processing to ensure quality.

  8. Principal curve detection in complicated graph images

    NASA Astrophysics Data System (ADS)

    Liu, Yuncai; Huang, Thomas S.

    2001-09-01

    Finding principal curves in an image is an important low level processing in computer vision and pattern recognition. Principal curves are those curves in an image that represent boundaries or contours of objects of interest. In general, a principal curve should be smooth with certain length constraint and allow either smooth or sharp turning. In this paper, we present a method that can efficiently detect principal curves in complicated map images. For a given feature image, obtained from edge detection of an intensity image or thinning operation of a pictorial map image, the feature image is first converted to a graph representation. In graph image domain, the operation of principal curve detection is performed to identify useful image features. The shortest path and directional deviation schemes are used in our algorithm os principal verve detection, which is proven to be very efficient working with real graph images.

  9. Benefit and cost curves for typical pollination mutualisms.

    PubMed

    Morris, William F; Vázquez, Diego P; Chacoff, Natacha P

    2010-05-01

    Mutualisms provide benefits to interacting species, but they also involve costs. If costs come to exceed benefits as population density or the frequency of encounters between species increases, the interaction will no longer be mutualistic. Thus curves that represent benefits and costs as functions of interaction frequency are important tools for predicting when a mutualism will tip over into antagonism. Currently, most of what we know about benefit and cost curves in pollination mutualisms comes from highly specialized pollinating seed-consumer mutualisms, such as the yucca moth-yucca interaction. There, benefits to female reproduction saturate as the number of visits to a flower increases (because the amount of pollen needed to fertilize all the flower's ovules is finite), but costs continue to increase (because pollinator offspring consume developing seeds), leading to a peak in seed production at an intermediate number of visits. But for most plant-pollinator mutualisms, costs to the plant are more subtle than consumption of seeds, and how such costs scale with interaction frequency remains largely unknown. Here, we present reasonable benefit and cost curves that are appropriate for typical pollinator-plant interactions, and we show how they can result in a wide diversity of relationships between net benefit (benefit minus cost) and interaction frequency. We then use maximum-likelihood methods to fit net-benefit curves to measures of female reproductive success for three typical pollination mutualisms from two continents, and for each system we chose the most parsimonious model using information-criterion statistics. We discuss the implications of the shape of the net-benefit curve for the ecology and evolution of plant-pollinator mutualisms, as well as the challenges that lie ahead for disentangling the underlying benefit and cost curves for typical pollination mutualisms.

  10. Shock melting method to determine melting curve by molecular dynamics: Cu, Pd, and Al.

    PubMed

    Liu, Zhong-Li; Zhang, Xiu-Lu; Cai, Ling-Cang

    2015-09-21

    A melting simulation method, the shock melting (SM) method, is proposed and proved to be able to determine the melting curves of materials accurately and efficiently. The SM method, which is based on the multi-scale shock technique, determines melting curves by preheating and/or prepressurizing materials before shock. This strategy was extensively verified using both classical and ab initio molecular dynamics (MD). First, the SM method yielded the same satisfactory melting curve of Cu with only 360 atoms using classical MD, compared to the results from the Z-method and the two-phase coexistence method. Then, it also produced a satisfactory melting curve of Pd with only 756 atoms. Finally, the SM method combined with ab initio MD cheaply achieved a good melting curve of Al with only 180 atoms, which agrees well with the experimental data and the calculated results from other methods. It turned out that the SM method is an alternative efficient method for calculating the melting curves of materials.

  11. Section Curve Reconstruction and Mean-Camber Curve Extraction of a Point-Sampled Blade Surface

    PubMed Central

    Li, Wen-long; Xie, He; Li, Qi-dong; Zhou, Li-ping; Yin, Zhou-ping

    2014-01-01

    The blade is one of the most critical parts of an aviation engine, and a small change in the blade geometry may significantly affect the dynamics performance of the aviation engine. Rapid advancements in 3D scanning techniques have enabled the inspection of the blade shape using a dense and accurate point cloud. This paper proposes a new method to achieving two common tasks in blade inspection: section curve reconstruction and mean-camber curve extraction with the representation of a point cloud. The mathematical morphology is expanded and applied to restrain the effect of the measuring defects and generate an ordered sequence of 2D measured points in the section plane. Then, the energy and distance are minimized to iteratively smoothen the measured points, approximate the section curve and extract the mean-camber curve. In addition, a turbine blade is machined and scanned to observe the curvature variation, energy variation and approximation error, which demonstrates the availability of the proposed method. The proposed method is simple to implement and can be applied in aviation casting-blade finish inspection, large forging-blade allowance inspection and visual-guided robot grinding localization. PMID:25551467

  12. Section curve reconstruction and mean-camber curve extraction of a point-sampled blade surface.

    PubMed

    Li, Wen-long; Xie, He; Li, Qi-dong; Zhou, Li-ping; Yin, Zhou-ping

    2014-01-01

    The blade is one of the most critical parts of an aviation engine, and a small change in the blade geometry may significantly affect the dynamics performance of the aviation engine. Rapid advancements in 3D scanning techniques have enabled the inspection of the blade shape using a dense and accurate point cloud. This paper proposes a new method to achieving two common tasks in blade inspection: section curve reconstruction and mean-camber curve extraction with the representation of a point cloud. The mathematical morphology is expanded and applied to restrain the effect of the measuring defects and generate an ordered sequence of 2D measured points in the section plane. Then, the energy and distance are minimized to iteratively smoothen the measured points, approximate the section curve and extract the mean-camber curve. In addition, a turbine blade is machined and scanned to observe the curvature variation, energy variation and approximation error, which demonstrates the availability of the proposed method. The proposed method is simple to implement and can be applied in aviation casting-blade finish inspection, large forging-blade allowance inspection and visual-guided robot grinding localization.

  13. Scaling of counter-current imbibition recovery curves using artificial neural networks

    NASA Astrophysics Data System (ADS)

    Jafari, Iman; Masihi, Mohsen; Nasiri Zarandi, Masoud

    2018-06-01

    Scaling imbibition curves are of great importance in the characterization and simulation of oil production from naturally fractured reservoirs. Different parameters such as matrix porosity and permeability, oil and water viscosities, matrix dimensions, and oil/water interfacial tensions have an effective on the imbibition process. Studies on the scaling imbibition curves along with the consideration of different assumptions have resulted in various scaling equations. In this work, using an artificial neural network (ANN) method, a novel technique is presented for scaling imbibition recovery curves, which can be used for scaling the experimental and field-scale imbibition cases. The imbibition recovery curves for training and testing the neural network were gathered through the simulation of different scenarios using a commercial reservoir simulator. In this ANN-based method, six parameters were assumed to have an effect on the imbibition process and were considered as the inputs for training the network. Using the ‘Bayesian regularization’ training algorithm, the network was trained and tested. Training and testing phases showed superior results in comparison with the other scaling methods. It is concluded that using the new technique is useful for scaling imbibition recovery curves, especially for complex cases, for which the common scaling methods are not designed.

  14. A weakly nonlinear theory for wave-vortex interactions in curved channel flow

    NASA Technical Reports Server (NTRS)

    Singer, Bart A.; Erlebacher, Gordon; Zang, Thomas A.

    1992-01-01

    A weakly nonlinear theory is developed to study the interaction of Tollmien-Schlichting (TS) waves and Dean vortices in curved channel flow. The predictions obtained from the theory agree well with results obtained from direct numerical simulations of curved channel flow, especially for low amplitude disturbances. Some discrepancies in the results of a previous theory with direct numerical simulations are resolved.

  15. Statistical aspects of modeling the labor curve.

    PubMed

    Zhang, Jun; Troendle, James; Grantz, Katherine L; Reddy, Uma M

    2015-06-01

    In a recent review by Cohen and Friedman, several statistical questions on modeling labor curves were raised. This article illustrates that asking data to fit a preconceived model or letting a sufficiently flexible model fit observed data is the main difference in principles of statistical modeling between the original Friedman curve and our average labor curve. An evidence-based approach to construct a labor curve and establish normal values should allow the statistical model to fit observed data. In addition, the presence of the deceleration phase in the active phase of an average labor curve was questioned. Forcing a deceleration phase to be part of the labor curve may have artificially raised the speed of progression in the active phase with a particularly large impact on earlier labor between 4 and 6 cm. Finally, any labor curve is illustrative and may not be instructive in managing labor because of variations in individual labor pattern and large errors in measuring cervical dilation. With the tools commonly available, it may be more productive to establish a new partogram that takes the physiology of labor and contemporary obstetric population into account. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. Analysis of the curve of Spee and the curve of Wilson in adult Indian population: A three-dimensional measurement study.

    PubMed

    Surendran, Sowmya Velekkatt; Hussain, Sharmila; Bhoominthan, S; Nayar, Sanjna; Jayesh, Ragavendra

    2016-01-01

    When reconstructing the occlusal curvatures dentists often use a 4-inch radii arc as a rough standard based on Monson spherical theory. The use of an identical radius for the curve of Spee for all patients may not be appropriate because each patient is individually different. The validity of application of this theory in the Indian population and the present study has been undertaken. This study is an attempt to evaluate the curve of Spee and curve of Wilson in young Indian population using three dimensional analysis. This study compared the radius and the depth of right and left, maxillary and mandibular curves of Spee and the radius of maxillary and mandibular curves of Wilson in males and females. The cusp tips of canines, buccal cusp tips of premolars and molars and palatal/lingual cusp tips of second molars of 60 maxillary and 60 mandibular casts were obtained. Three-dimensional (x, y, z) coordinates of the cusp tips of the molars, premolars, and canines of the right and left sides of the maxilla and mandible were obtained with three dimensional coordinate measuring machine. The radius and the depth of right and left, maxillary and mandibular curves of Spee and the radius of maxillary and mandibular curves of Wilson were measured by means of computer software Metrologic-XG. Pearson's correlation test and Independent t-test were used to test the statistical significance (α=.05). The values of curve of Spee and curve of Wilson in Indian population obtained from this study were higher than the 4 inch (100 mm) radius proposed by Monson. These findings suggest ethnic differences in the radius of curve of Spee and curve of Wilson.

  17. A simple Lissajous curves experimental setup

    NASA Astrophysics Data System (ADS)

    Şahin Kızılcık, Hasan; Damlı, Volkan

    2018-05-01

    The aim of this study is to develop an experimental setup to produce Lissajous curves. The setup was made using a smartphone, a powered speaker (computer speaker), a balloon, a laser pointer and a piece of mirror. Lissajous curves are formed as follows: a piece of mirror is attached to a balloon. The balloon is vibrated with the sound signal provided by the speaker that is connected to a smartphone. The laser beam is reflected off the mirror and the reflection is shaped as a Lissajous curve. Because of the intersection of two frequencies (frequency of the sound signal and natural vibration frequency of the balloon), these curves are formed. They can be used to measure the ratio of frequencies.

  18. Random Matrix Theory and Elliptic Curves

    DTIC Science & Technology

    2014-11-24

    distribution is unlimited. 1 ELLIPTIC CURVES AND THEIR L-FUNCTIONS 2 points on that curve. Counting rational points on curves is a field with a rich ...deficiency of zeros near the origin of the histograms in Figure 1. While as d becomes large this discretization becomes smaller and has less and less effect...order of 30), the regular oscillations seen at the origin become dominated by fluctuations of an arithmetic origin, influenced by zeros of the Riemann

  19. Geomorphological origin of recession curves

    NASA Astrophysics Data System (ADS)

    Biswal, Basudev; Marani, Marco

    2010-12-01

    We identify a previously undetected link between the river network morphology and key recession curves properties through a conceptual-physical model of the drainage process of the riparian unconfined aquifer. We show that the power-law exponent, α, of -dQ/dt vs. Q curves is related to the power-law exponent of N(l) vs. G(l) curves (which we show to be connected to Hack's law), where l is the downstream distance from the channel heads, N(l) is the number of channel reaches exactly located at a distance l from their channel head, and G(l) is the total length of the network located at a distance greater or equal to l from channel heads. Using Digital Terrain Models and daily discharge observations from 67 US basins we find that geomorphologic α estimates match well the values obtained from recession curves analyses. Finally, we argue that the link between recession flows and network morphology points to an important role of low-flow discharges in shaping the channel network.

  20. Development and Validation of Mobile Learning Acceptance Measure

    ERIC Educational Resources Information Center

    Sharma, Sujeet Kumar; Sarrab, Mohamed; Al-Shihi, Hafedh

    2017-01-01

    The growth of Smartphone usage, increased acceptance of electronic learning (E-learning), the availability of high reliability mobile networks and need for flexibility in learning have resulted in the growth of mobile learning (M-learning). This has led to a tremendous interest in the acceptance behaviors related to M-learning users among the…

  1. Lower extremity kinematics of athletics curve sprinting.

    PubMed

    Alt, Tobias; Heinrich, Kai; Funken, Johannes; Potthast, Wolfgang

    2015-01-01

    Curve running requires the generation of centripetal force altering the movement pattern in comparison to the straight path run. The question arises which kinematic modulations emerge while bend sprinting at high velocities. It has been suggested that during curve sprints the legs fulfil different functions. A three-dimensional motion analysis (16 high-speed cameras) was conducted to compare the segmental kinematics of the lower extremity during the stance phases of linear and curve sprints (radius: 36.5 m) of six sprinters of national competitive level. Peak joint angles substantially differed in the frontal and transversal plane whereas sagittal plane kinematics remained unchanged. During the prolonged left stance phase (left: 107.5 ms, right: 95.7 ms, straight: 104.4 ms) the maximum values of ankle eversion (left: 12.7°, right: 2.6°, straight: 6.6°), hip adduction (left: 13.8°, right: 5.5°, straight: 8.8°) and hip external rotation (left: 21.6°, right: 12.9°, straight: 16.7°) were significantly higher. The inside leg seemed to stabilise the movement in the frontal plane (eversion-adduction strategy) whereas the outside leg provided and controlled the motion in the horizontal plane (rotation strategy). These results extend the principal understanding of the effects of curve sprinting on lower extremity kinematics. This helps to increase the understanding of nonlinear human bipedal locomotion, which in turn might lead to improvements in athletic performance and injury prevention.

  2. Satellite altimetry based rating curves throughout the entire Amazon basin

    NASA Astrophysics Data System (ADS)

    Paris, A.; Calmant, S.; Paiva, R. C.; Collischonn, W.; Silva, J. S.; Bonnet, M.; Seyler, F.

    2013-05-01

    experiment shows that the stochastic approach is more efficient than the determinist one. By using for the parameters prior credible intervals defined by the user, this method provides an estimate of best rating curve estimate without any unlikely parameter, and all sites achieved convergence before reaching the maximum number of model evaluations. Results were assessed trough the Nash Sutcliffe efficiency coefficient, applied both to discharge and logarithm of discharges. Most of the virtual stations had good or very good results, showing values of Ens going from 0.7 to 0.98. However, worse results were found at a few virtual stations, unveiling the necessity of investigating possibilities of segmentation of the rating curve, depending on the stage or the rising or recession limb, but also possible errors in the altimetry series.

  3. DICOM image quantification secondary capture (DICOM IQSC) integrated with numeric results, regions, and curves: implementation and applications in nuclear medicine

    NASA Astrophysics Data System (ADS)

    Cao, Xinhua; Xu, Xiaoyin; Voss, Stephan

    2017-03-01

    In this paper, we describe an enhanced DICOM Secondary Capture (SC) that integrates Image Quantification (IQ) results, Regions of Interest (ROIs), and Time Activity Curves (TACs) with screen shots by embedding extra medical imaging information into a standard DICOM header. A software toolkit of DICOM IQSC has been developed to implement the SC-centered information integration of quantitative analysis for routine practice of nuclear medicine. Primary experiments show that the DICOM IQSC method is simple and easy to implement seamlessly integrating post-processing workstations with PACS for archiving and retrieving IQ information. Additional DICOM IQSC applications in routine nuclear medicine and clinic research are also discussed.

  4. Fitting Richards' curve to data of diverse origins

    USGS Publications Warehouse

    Johnson, D.H.; Sargeant, A.B.; Allen, S.H.

    1975-01-01

    Published techniques for fitting data to nonlinear growth curves are briefly reviewed, most techniques require knowledge of the shape of the curve. A flexible growth curve developed by Richards (1959) is discussed as an alternative when the shape is unknown. The shape of this curve is governed by a specific parameter which can be estimated from the data. We describe in detail the fitting of a diverse set of longitudinal and cross-sectional data to Richards' growth curve for the purpose of determining the age of red fox (Vulpes vulpes) pups on the basis of right hind foot length. The fitted curve is found suitable for pups less than approximately 80 days old. The curve is extrapolated to pre-natal growth and shown to be appropriate only for about 10 days prior to birth.

  5. Applications of crude incidence curves.

    PubMed

    Korn, E L; Dorey, F J

    1992-04-01

    Crude incidence curves display the cumulative number of failures of interest as a function of time. With competing causes of failure, they are distinct from cause-specific incidence curves that treat secondary types of failures as censored observations. After briefly reviewing their definition and estimation, we present five applications of crude incidence curves to show their utility in a broad range of studies. In some of these applications it is helpful to model survival-time distributions with use of two different time metameters, for example, time from diagnosis and age of the patient. We describe how one can incorporate published vital statistics into the models when secondary types of failure correspond to common causes of death.

  6. Methods for Performing Survival Curve Quality-of-Life Assessments.

    PubMed

    Sumner, Walton; Ding, Eric; Fischer, Irene D; Hagen, Michael D

    2014-08-01

    Many medical decisions involve an implied choice between alternative survival curves, typically with differing quality of life. Common preference assessment methods neglect this structure, creating some risk of distortions. Survival curve quality-of-life assessments (SQLA) were developed from Gompertz survival curves fitting the general population's survival. An algorithm was developed to generate relative discount rate-utility (DRU) functions from a standard survival curve and health state and an equally attractive alternative curve and state. A least means squared distance algorithm was developed to describe how nearly 3 or more DRU functions intersect. These techniques were implemented in a program called X-Trade and tested. SQLA scenarios can portray realistic treatment choices. A side effect scenario portrays one prototypical choice, to extend life while experiencing some loss, such as an amputation. A risky treatment scenario portrays procedures with an initial mortality risk. A time trade scenario mimics conventional time tradeoffs. Each SQLA scenario yields DRU functions with distinctive shapes, such as sigmoid curves or vertical lines. One SQLA can imply a discount rate or utility if the other value is known and both values are temporally stable. Two SQLA exercises imply a unique discount rate and utility if the inferred DRU functions intersect. Three or more SQLA results can quantify uncertainty or inconsistency in discount rate and utility estimates. Pilot studies suggested that many subjects could learn to interpret survival curves and do SQLA. SQLA confuse some people. Compared with SQLA, standard gambles quantify very low utilities more easily, and time tradeoffs are simpler for high utilities. When discount rates approach zero, time tradeoffs are as informative and easier to do than SQLA. SQLA may complement conventional utility assessment methods. © The Author(s) 2014.

  7. Statistical inference methods for two crossing survival curves: a comparison of methods.

    PubMed

    Li, Huimin; Han, Dong; Hou, Yawen; Chen, Huilin; Chen, Zheng

    2015-01-01

    A common problem that is encountered in medical applications is the overall homogeneity of survival distributions when two survival curves cross each other. A survey demonstrated that under this condition, which was an obvious violation of the assumption of proportional hazard rates, the log-rank test was still used in 70% of studies. Several statistical methods have been proposed to solve this problem. However, in many applications, it is difficult to specify the types of survival differences and choose an appropriate method prior to analysis. Thus, we conducted an extensive series of Monte Carlo simulations to investigate the power and type I error rate of these procedures under various patterns of crossing survival curves with different censoring rates and distribution parameters. Our objective was to evaluate the strengths and weaknesses of tests in different situations and for various censoring rates and to recommend an appropriate test that will not fail for a wide range of applications. Simulation studies demonstrated that adaptive Neyman's smooth tests and the two-stage procedure offer higher power and greater stability than other methods when the survival distributions cross at early, middle or late times. Even for proportional hazards, both methods maintain acceptable power compared with the log-rank test. In terms of the type I error rate, Renyi and Cramér-von Mises tests are relatively conservative, whereas the statistics of the Lin-Xu test exhibit apparent inflation as the censoring rate increases. Other tests produce results close to the nominal 0.05 level. In conclusion, adaptive Neyman's smooth tests and the two-stage procedure are found to be the most stable and feasible approaches for a variety of situations and censoring rates. Therefore, they are applicable to a wider spectrum of alternatives compared with other tests.

  8. Statistical Inference Methods for Two Crossing Survival Curves: A Comparison of Methods

    PubMed Central

    Li, Huimin; Han, Dong; Hou, Yawen; Chen, Huilin; Chen, Zheng

    2015-01-01

    A common problem that is encountered in medical applications is the overall homogeneity of survival distributions when two survival curves cross each other. A survey demonstrated that under this condition, which was an obvious violation of the assumption of proportional hazard rates, the log-rank test was still used in 70% of studies. Several statistical methods have been proposed to solve this problem. However, in many applications, it is difficult to specify the types of survival differences and choose an appropriate method prior to analysis. Thus, we conducted an extensive series of Monte Carlo simulations to investigate the power and type I error rate of these procedures under various patterns of crossing survival curves with different censoring rates and distribution parameters. Our objective was to evaluate the strengths and weaknesses of tests in different situations and for various censoring rates and to recommend an appropriate test that will not fail for a wide range of applications. Simulation studies demonstrated that adaptive Neyman’s smooth tests and the two-stage procedure offer higher power and greater stability than other methods when the survival distributions cross at early, middle or late times. Even for proportional hazards, both methods maintain acceptable power compared with the log-rank test. In terms of the type I error rate, Renyi and Cramér—von Mises tests are relatively conservative, whereas the statistics of the Lin-Xu test exhibit apparent inflation as the censoring rate increases. Other tests produce results close to the nominal 0.05 level. In conclusion, adaptive Neyman’s smooth tests and the two-stage procedure are found to be the most stable and feasible approaches for a variety of situations and censoring rates. Therefore, they are applicable to a wider spectrum of alternatives compared with other tests. PMID:25615624

  9. [Pancreatoduodenectomy: learning curve within single multi-field center].

    PubMed

    Kaprin, A D; Kostin, A A; Nikiforov, P V; Egorov, V I; Grishin, N A; Lozhkin, M V; Petrov, L O; Bykasov, S A; Sidorov, D V

    2018-01-01

    To analyze learning curve by using of immediate results of pancreatoduodenectomy at multi-field oncology institute. For the period 2010-2016 at Abdominal Oncology Department of Herzen Moscow Oncology Research Institute 120 pancreatoduodenal resections were consistently performed. All patients were divided into two groups: the first 60 procedures (group A) and subsequent 60 operations (group B). Herewith, first 60 operations were performed within the first 4.5 years of study period, the next 60 operations - within remaining 2.5 years. Learning curves showed significantly variable intraoperative blood loss (1100 ml and 725 ml), surgery time (589 min and 513 min) and postoperative hospital-stay (15 days and 13 days) in group A followed by gradual improvement of these values in group B. Incidence of negative resection margin (R0) was also significantly improved in the last 60 operations (70 and 92%, respectively). Despite pancreatoduodenectomy is one of the most difficult surgical interventions in abdominal surgery learning curve will differ from one surgeon to another.

  10. The Bell Curve Wars. Race, Intelligence, and the Future of America.

    ERIC Educational Resources Information Center

    Fraser, Steven, Ed.

    "The Bell Curve" by Richard J. Herrnstein and Charles Murray has generated enormous debate as a result of its claim that there is a connection between race and intelligence. The essays of this collection respond to "The Bell Curve" in various ways. Taken together, the following offer an antidote to a work of dubious premises…

  11. Pitfalls of inferring annual mortality from inspection of published survival curves.

    PubMed

    Singer, R B

    1994-01-01

    In many FU articles currently published, results are given primarily in the form of graphs of survival curves, rather than in the form of life table data. Sometimes the authors may comment on the slope of the survival curve as though it were equal to the annual mortality rate (after reversal of the minus sign to a plus sign). Even if no comment of this sort is made, medical directors and underwriters may be tempted to think along similar lines in trying to interpret the significance of the survival curve in terms of mortality. However it is a very serious error of life table methodology to conceive of mortality rate as equal to the negative slope of the survival curve. The nature of the error is demonstrated in this article. An annual mortality rate derived from the survival curve actually depends on two variables: a quotient with the negative slope (sign reversed), delta P/ delta as the numerator, and the survival rate, P, itself as the denominator. The implications of this relationship are discussed. If there are two "parallel" survival curves with the same slope at a given time duration, the lower curve will have a higher mortality rate than the upper curve. A constant slope with increasing duration means that the annual mortality rate also increases with duration. Some characteristics of high initial mortality are also discussed and their relation to different units of FU time.(ABSTRACT TRUNCATED AT 250 WORDS)

  12. Physical growth curves of indigenous Xavante children in Central Brazil: results from a longitudinal study (2009-2012).

    PubMed

    Ferreira, Aline A; Welch, James R; Cunha, Geraldo Marcelo; Coimbra, Carlos E A

    2016-07-01

    The nutritional profile of Indigenous children in Brazil is comparable to those observed in some of the least developed regions of the world. Weight and height growth curves were characterised based on longitudinal data from a local Indigenous population experiencing the double burden of child under-nutrition and adult obesity. Anthropometric data were collected in six waves from 2009-2011 for children <10 in two proximate Xavante villages in Central Brazil. Prevalence rates for stunting, wasting and thinness were calculated using WHO references. Weight and height data were adjusted for generalised additive mixed models to generate growth curves. Prevalence rates of stunting and wasting were high, but cases of thinness and excess weight were negligible. Weight and height began close to WHO medians, but fell substantially before 12 months. Boys but not girls were able to catch-up in weight before age 10. From 3-10 years, height for both sexes remained between -2 and 0 z-scores. Impaired Xavante growth before 1 year followed by inconsistent recovery before 10 years reflects health and wellbeing disparities with regard to the Brazilian national population and a complex epidemiology of growth involving rapid nutritional change.

  13. An Interoperability Consideration in Selecting Domain Parameters for Elliptic Curve Cryptography

    NASA Technical Reports Server (NTRS)

    Ivancic, Will (Technical Monitor); Eddy, Wesley M.

    2005-01-01

    Elliptic curve cryptography (ECC) will be an important technology for electronic privacy and authentication in the near future. There are many published specifications for elliptic curve cryptosystems, most of which contain detailed descriptions of the process for the selection of domain parameters. Selecting strong domain parameters ensures that the cryptosystem is robust to attacks. Due to a limitation in several published algorithms for doubling points on elliptic curves, some ECC implementations may produce incorrect, inconsistent, and incompatible results if domain parameters are not carefully chosen under a criterion that we describe. Few documents specify the addition or doubling of points in such a manner as to avoid this problematic situation. The safety criterion we present is not listed in any ECC specification we are aware of, although several other guidelines for domain selection are discussed in the literature. We provide a simple example of how a set of domain parameters not meeting this criterion can produce catastrophic results, and outline a simple means of testing curve parameters for interoperable safety over doubling.

  14. International transferability of accident modification functions for horizontal curves.

    PubMed

    Elvik, Rune

    2013-10-01

    Studies of the relationship between characteristics of horizontal curves and accident rate have been reported in several countries. The characteristic most often studied is the radius of a horizontal curve. Functions describing the relationship between the radius of horizontal curves and accident rate have been developed in Australia, Canada, Denmark, Germany, Great Britain, New Zealand, Norway, Portugal, Sweden, and the United States. Other characteristics of horizontal curves that have been studied include deflection angle, curve length, the presence of transition curves, super-elevation in curves and distance to adjacent curves. This paper assesses the international transferability of mathematical functions (accident modification functions) that have been developed to relate the radius of horizontal curves to their accident rate. The main research problem is whether these functions are similar, which enhances international transferability, or dissimilar, which reduces international transferability. Accident modification functions for horizontal curve radius developed in the countries listed above are synthesised. The sensitivity of the functions to other characteristics of curves than radius is examined. Accident modification functions developed in different countries have important similarities. The functions diverge with respect to accident rate in the sharpest curves. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Prediction of R-curves from small coupon tests

    NASA Technical Reports Server (NTRS)

    Yeh, J. R.; Bray, G. H.; Bucci, R. J.; Macheret, Y.

    1994-01-01

    R-curves were predicted for Alclad 2024-T3 and C188-T3 sheet using the results of small-coupon Kahn tear tests in combination with two-dimensional elastic-plastic finite element stress analyses. The predictions were compared to experimental R-curves from 6.3, 16 and 60-inch wide M(T) specimens and good agreement was obtained. The method is an inexpensive alternative to wide panel testing for characterizing the fracture toughness of damage-tolerant sheet alloys. The usefulness of this approach was demonstrated by performing residual strength calculations for a two-bay crack in a representative fuselage structure. C188-T3 was predicted to have a 24 percent higher load carrying capability than 2024-T3 in this application as a result of its superior fracture toughness.

  16. Solid-state curved focal plane arrays

    NASA Technical Reports Server (NTRS)

    Jones, Todd (Inventor); Nikzad, Shouleh (Inventor); Hoenk, Michael (Inventor)

    2010-01-01

    The present invention relates to curved focal plane arrays. More specifically, the present invention relates to a system and method for making solid-state curved focal plane arrays from standard and high-purity devices that may be matched to a given optical system. There are two ways to make a curved focal plane arrays starting with the fully fabricated device. One way, is to thin the device and conform it to a curvature. A second way, is to back-illuminate a thick device without making a thinned membrane. The thick device is a special class of devices; for example devices fabricated with high purity silicon. One surface of the device (the non VLSI fabricated surface, also referred to as the back surface) can be polished to form a curved surface.

  17. Sketching Curves for Normal Distributions--Geometric Connections

    ERIC Educational Resources Information Center

    Bosse, Michael J.

    2006-01-01

    Within statistics instruction, students are often requested to sketch the curve representing a normal distribution with a given mean and standard deviation. Unfortunately, these sketches are often notoriously imprecise. Poor sketches are usually the result of missing mathematical knowledge. This paper considers relationships which exist among…

  18. Acceptance of Swedish e-health services

    PubMed Central

    Jung, Mary-Louise; Loria, Karla

    2010-01-01

    Objective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health. Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM), in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted. Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use. Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide. PMID:21289860

  19. Information technology acceptance in health information management.

    PubMed

    Abdekhoda, M; Ahmadi, M; Dehnad, A; Hosseini, A F

    2014-01-01

    User acceptance of information technology has been a significant area of research for more than two decades in the field of information technology. This study assessed the acceptance of information technology in the context of Health Information Management (HIM) by utilizing Technology Acceptance Model (TAM) which was modified and applied to assess user acceptance of health information technology as well as viability of TAM as a research construct in the context of HIM. This was a descriptive- analytical study in which a sample of 187 personnel from a population of 363 personnel, working in medical records departments of hospitals affiliated to Tehran University of Medical Sciences, was selected. Users' perception of applying information technology was studied by a researcher-developed questionnaire. Collected data were analyzed by SPSS software (version16) using descriptive statistics and regression analysis. The results suggest that TAM is a useful construct to assess user acceptance of information technology in the context of HIM. The findings also evidenced the perceived ease of use (PEOU) and perceived usefulness (PE) were positively associated with favorable users' attitudes towards HIM. PU was relatively more associated (r= 0.22, p = 0.05) than PEOU (r = 0.014, p = 0.05) with favorable user attitudes towards HIM. Users' perception of usefulness and ease of use are important determinants providing the incentive for users to accept information technologies when the application of a successful HIM system is attempted. The findings of the present study suggest that user acceptance is a key element and should subsequently be the major concern of health organizations and health policy makers.

  20. Understanding and Taking Control of Surgical Learning Curves.

    PubMed

    Gofton, Wade T; Papp, Steven R; Gofton, Tyson; Beaulé, Paul E

    2016-01-01

    As surgical techniques continue to evolve, surgeons will have to integrate new skills into their practice. A learning curve is associated with the integration of any new procedure; therefore, it is important for surgeons who are incorporating a new technique into their practice to understand what the reported learning curve might mean for them and their patients. A learning curve should not be perceived as negative because it can indicate progress; however, surgeons need to understand how to optimize the learning curve to ensure progress with minimal patient risk. It is essential for surgeons who are implementing new procedures or skills to define potential learning curves, examine how a reported learning curve may relate to an individual surgeon's in-practice learning and performance, and suggest methods in which an individual surgeon can modify his or her specific learning curve in order to optimize surgical outcomes and patient safety. A defined personal learning contract may be a practical method for surgeons to proactively manage their individual learning curve and provide evidence of their efforts to safely improve surgical practice.

  1. Intertwined Hamiltonians in two-dimensional curved spaces

    NASA Astrophysics Data System (ADS)

    Aghababaei Samani, Keivan; Zarei, Mina

    2005-04-01

    The problem of intertwined Hamiltonians in two-dimensional curved spaces is investigated. Explicit results are obtained for Euclidean plane, Minkowski plane, Poincaré half plane (AdS2), de Sitter plane (dS2), sphere, and torus. It is shown that the intertwining operator is related to the Killing vector fields and the isometry group of corresponding space. It is shown that the intertwined potentials are closely connected to the integral curves of the Killing vector fields. Two problems are considered as applications of the formalism presented in the paper. The first one is the problem of Hamiltonians with equispaced energy levels and the second one is the problem of Hamiltonians whose spectrum is like the spectrum of a free particle.

  2. High acceptability for cell phone text messages to improve communication of laboratory results with HIV-infected patients in rural Uganda: a cross-sectional survey study

    PubMed Central

    2012-01-01

    Background Patient-provider communication is a major challenge in resource-limited settings with large catchment areas. Though mobile phone usership increased 20-fold in Africa over the past decade, little is known about acceptability of, perceptions about disclosure and confidentiality, and preferences for cell phone communication of health information in the region. Methods We performed structured interviews of fifty patients at the Immune Suppression Syndrome clinic in Mbarara, Uganda to assess four domains of health-related communication: a) cell phone use practices and literacy, b) preferences for laboratory results communication, c) privacy and confidentiality, and d) acceptability of and preferences for text messaging to notify patients of abnormal test results. Results Participants had a median of 38 years, were 56% female, and were residents of a large catchment area throughout southwestern Uganda. All participants expressed interest in a service to receive information about laboratory results by cell phone text message, stating benefits of increased awareness of their health and decreased transportation costs. Ninety percent reported that they would not be concerned for unintended disclosure. A minority additionally expressed concerns about difficulty interpreting messages, discouragement upon learning bad news, and technical issues. Though all respondents expressed interest in password protection of messages, there was also a strong desire for direct messages to limit misinterpretation of information. Conclusions Cell phone text messaging for communication of abnormal laboratory results is highly acceptable in this cohort of HIV-infected patients in rural Uganda. The feasibility of text messaging, including an optimal balance between privacy and comprehension, should be further studied. PMID:22720901

  3. Grammaticality, Acceptability, and Probability: A Probabilistic View of Linguistic Knowledge.

    PubMed

    Lau, Jey Han; Clark, Alexander; Lappin, Shalom

    2017-07-01

    The question of whether humans represent grammatical knowledge as a binary condition on membership in a set of well-formed sentences, or as a probabilistic property has been the subject of debate among linguists, psychologists, and cognitive scientists for many decades. Acceptability judgments present a serious problem for both classical binary and probabilistic theories of grammaticality. These judgements are gradient in nature, and so cannot be directly accommodated in a binary formal grammar. However, it is also not possible to simply reduce acceptability to probability. The acceptability of a sentence is not the same as the likelihood of its occurrence, which is, in part, determined by factors like sentence length and lexical frequency. In this paper, we present the results of a set of large-scale experiments using crowd-sourced acceptability judgments that demonstrate gradience to be a pervasive feature in acceptability judgments. We then show how one can predict acceptability judgments on the basis of probability by augmenting probabilistic language models with an acceptability measure. This is a function that normalizes probability values to eliminate the confounding factors of length and lexical frequency. We describe a sequence of modeling experiments with unsupervised language models drawn from state-of-the-art machine learning methods in natural language processing. Several of these models achieve very encouraging levels of accuracy in the acceptability prediction task, as measured by the correlation between the acceptability measure scores and mean human acceptability values. We consider the relevance of these results to the debate on the nature of grammatical competence, and we argue that they support the view that linguistic knowledge can be intrinsically probabilistic. Copyright © 2016 Cognitive Science Society, Inc.

  4. VLT/X-shooter GRBs: Individual extinction curves of star-forming regions★

    NASA Astrophysics Data System (ADS)

    Zafar, T.; Watson, D.; Møller, P.; Selsing, J.; Fynbo, J. PU; Schady, P.; Wiersema, K.; Levan, A. J.; Heintz, K. E.; Postigo, A. de Ugarte; D'Elia, V.; Jakobsson, P.; Bolmer, J.; Japelj, J.; Covino, S.; Gomboc, A.; Cano, Z.

    2018-05-01

    The extinction profiles in Gamma-Ray Burst (GRB) afterglow spectral energy distributions (SEDs) are usually described by the Small Magellanic Cloud (SMC)-type extinction curve. In different empirical extinction laws, the total-to-selective extinction, RV, is an important quantity because of its relation to dust grain sizes and compositions. We here analyse a sample of 17 GRBs (0.34curves of GRBs for the first time. Our sample is compiled on the basis that multi-band photometry is available around the X-shooter observations. The X-shooter data are combined with the Swift X-ray data and a single or broken power-law together with a parametric extinction law is used to model the individual SEDs. We find 10 cases with significant dust, where the derived extinction, AV, ranges from 0.1-1.0 mag. In four of those, the inferred extinction curves are consistent with the SMC curve. The GRB individual extinction curves have a flat RV distribution with an optimal weighted combined value of RV = 2.61 ± 0.08 (for seven broad coverage cases). The `average GRB extinction curve' is similar to, but slightly steeper than the typical SMC, and consistent with the SMC Bar extinction curve at ˜95% confidence level. The resultant steeper extinction curves imply populations of small grains, where large dust grains may be destroyed due to GRB activity. Another possibility could be that young age and/or lower metallicities of GRBs environments are responsible for the steeper curves.

  5. Shape optimization of self-avoiding curves

    NASA Astrophysics Data System (ADS)

    Walker, Shawn W.

    2016-04-01

    This paper presents a softened notion of proximity (or self-avoidance) for curves. We then derive a sensitivity result, based on shape differential calculus, for the proximity. This is combined with a gradient-based optimization approach to compute three-dimensional, parameterized curves that minimize the sum of an elastic (bending) energy and a proximity energy that maintains self-avoidance by a penalization technique. Minimizers are computed by a sequential-quadratic-programming (SQP) method where the bending energy and proximity energy are approximated by a finite element method. We then apply this method to two problems. First, we simulate adsorbed polymer strands that are constrained to be bound to a surface and be (locally) inextensible. This is a basic model of semi-flexible polymers adsorbed onto a surface (a current topic in material science). Several examples of minimizing curve shapes on a variety of surfaces are shown. An advantage of the method is that it can be much faster than using molecular dynamics for simulating polymer strands on surfaces. Second, we apply our proximity penalization to the computation of ideal knots. We present a heuristic scheme, utilizing the SQP method above, for minimizing rope-length and apply it in the case of the trefoil knot. Applications of this method could be for generating good initial guesses to a more accurate (but expensive) knot-tightening algorithm.

  6. Compression-based integral curve data reuse framework for flow visualization

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hong, Fan; Bi, Chongke; Guo, Hanqi

    Currently, by default, integral curves are repeatedly re-computed in different flow visualization applications, such as FTLE field computation, source-destination queries, etc., leading to unnecessary resource cost. We present a compression-based data reuse framework for integral curves, to greatly reduce their retrieval cost, especially in a resource-limited environment. In our design, a hierarchical and hybrid compression scheme is proposed to balance three objectives, including high compression ratio, controllable error, and low decompression cost. Specifically, we use and combine digitized curve sparse representation, floating-point data compression, and octree space partitioning to adaptively achieve the objectives. Results have shown that our data reusemore » framework could acquire tens of times acceleration in the resource-limited environment compared to on-the-fly particle tracing, and keep controllable information loss. Moreover, our method could provide fast integral curve retrieval for more complex data, such as unstructured mesh data.« less

  7. Exact BPF and FBP algorithms for nonstandard saddle curves.

    PubMed

    Yu, Hengyong; Zhao, Shiying; Ye, Yangbo; Wang, Ge

    2005-11-01

    A hot topic in cone-beam CT research is exact cone-beam reconstruction from a general scanning trajectory. Particularly, a nonstandard saddle curve attracts attention, as this construct allows the continuous periodic scanning of a volume-of-interest (VOI). Here we evaluate two algorithms for reconstruction from data collected along a nonstandard saddle curve, which are in the filtered backprojection (FBP) and backprojection filtration (BPF) formats, respectively. Both the algorithms are implemented in a chord-based coordinate system. Then, a rebinning procedure is utilized to transform the reconstructed results into the natural coordinate system. The simulation results demonstrate that the FBP algorithm produces better image quality than the BPF algorithm, while both the algorithms exhibit similar noise characteristics.

  8. Is biotechnology (more) acceptable when it enables a reduction in phytosanitary treatments? A European comparison of the acceptability of transgenesis and cisgenesis

    PubMed Central

    2017-01-01

    Reduced pesticide use is one of the reasons given by Europeans for accepting new genetic engineering techniques. According to the advocates of these techniques, consumers are likely to embrace the application of cisgenesis to apple trees. In order to verify the acceptability of these techniques, we estimate a Bayesian multilevel structural equation model, which takes into account the multidimensional nature of acceptability and individual, national, and European effects, using data from the Eurobarometer 2010 73.1 on science. The results underline the persistence of clear differences between European countries and whilst showing considerable defiance, a relatively wider acceptability of vertical gene transfer as a means of reducing phytosanitary treatments, compared to horizontal transfer. PMID:28877215

  9. Apollo 16/AS-511/LM-11 operational calibration curves. Volume 1: Calibration curves for command service module CSM 113

    NASA Technical Reports Server (NTRS)

    Demoss, J. F. (Compiler)

    1971-01-01

    Calibration curves for the Apollo 16 command service module pulse code modulation downlink and onboard display are presented. Subjects discussed are: (1) measurement calibration curve format, (2) measurement identification, (3) multi-mode calibration data summary, (4) pulse code modulation bilevel events listing, and (5) calibration curves for instrumentation downlink and meter link.

  10. LIMS user acceptance testing.

    PubMed

    Klein, Corbett S

    2003-01-01

    Laboratory Information Management Systems (LIMS) play a key role in the pharmaceutical industry. Thorough and accurate validation of such systems is critical and is a regulatory requirement. LIMS user acceptance testing is one aspect of this testing and enables the user to make a decision to accept or reject implementation of the system. This paper discusses key elements in facilitating the development and execution of a LIMS User Acceptance Test Plan (UATP).

  11. Retiring the Short-Run Aggregate Supply Curve

    ERIC Educational Resources Information Center

    Elwood, S. Kirk

    2010-01-01

    The author argues that the aggregate demand/aggregate supply (AD/AS) model is significantly improved--although certainly not perfected--by trimming it of the short-run aggregate supply (SRAS) curve. Problems with the SRAS curve are shown first for the AD/AS model that casts the AD curve as identifying the equilibrium level of output associated…

  12. A qualitative study assessing the acceptability and adoption of implementing a results based financing intervention to improve maternal and neonatal health in Malawi.

    PubMed

    Wilhelm, Danielle J; Brenner, Stephan; Muula, Adamson S; De Allegri, Manuela

    2016-08-17

    Results Based Financing (RBF) interventions have recently gained significant momentum, especially in sub-Saharan Africa. However, most of the research has focused on the evaluation of the impacts of this approach, providing little insight into how the contextual circumstances surrounding the implementation have contributed to its success or failure. This study aims to fill a void in the current literature on RBF by focusing explicitly on the process of implementing a RBF intervention rather than on its impact. Specifically, this study focuses on the acceptability and adoption of the RBF intervention's implementation among local and international key stakeholders with the aim to inform further implementation. The Results Based Financing for Maternal and Neonatal Health (RBF4MNH) Initiative is currently being implemented in Malawi. Our study employed an exploratory cross-sectional qualitative design to explore the factors affecting the acceptability and adoption of the intervention's implementation. Purposeful sampling techniques were used to identify each key stakeholder who participated in all or parts of the implementation process. In-depth interviews were conducted and analyzed using a deductive open coding approach. The final interpretation of the findings emerged through active discussion among the co-authors. Despite encountering several challenges, such as delay in procurement of equipment and difficulties in arranging local bank accounts, all stakeholders responded positively to the RBF4MNH Initiative. Stakeholders' acceptance of the RBF4MNH Initiative grew stronger over time as understanding of the intervention improved and was supported by early inclusion during the design and implementation process. In addition, stakeholders took on functions not directly incentivized by the intervention, suggesting that they turned adoption into actual ownership. All stakeholders raised concerns that the intervention may not be sustainable after its initial program phase

  13. Principal Curves on Riemannian Manifolds.

    PubMed

    Hauberg, Soren

    2016-09-01

    Euclidean statistics are often generalized to Riemannian manifolds by replacing straight-line interpolations with geodesic ones. While these Riemannian models are familiar-looking, they are restricted by the inflexibility of geodesics, and they rely on constructions which are optimal only in Euclidean domains. We consider extensions of Principal Component Analysis (PCA) to Riemannian manifolds. Classic Riemannian approaches seek a geodesic curve passing through the mean that optimizes a criteria of interest. The requirements that the solution both is geodesic and must pass through the mean tend to imply that the methods only work well when the manifold is mostly flat within the support of the generating distribution. We argue that instead of generalizing linear Euclidean models, it is more fruitful to generalize non-linear Euclidean models. Specifically, we extend the classic Principal Curves from Hastie & Stuetzle to data residing on a complete Riemannian manifold. We show that for elliptical distributions in the tangent of spaces of constant curvature, the standard principal geodesic is a principal curve. The proposed model is simple to compute and avoids many of the pitfalls of traditional geodesic approaches. We empirically demonstrate the effectiveness of the Riemannian principal curves on several manifolds and datasets.

  14. Nursing acceptance of a speech-input interface: a preliminary investigation.

    PubMed

    Dillon, T W; McDowell, D; Norcio, A F; DeHaemer, M J

    1994-01-01

    Many new technologies are being developed to improve the efficiency and productivity of nursing staffs. User acceptance is a key to the success of these technologies. In this article, the authors present a discussion of nursing acceptance of computer systems, review the basic design issues for creating a speech-input interface, and report preliminary findings of a study of nursing acceptance of a prototype speech-input interface. Results of the study showed that the 19 nursing subjects expressed acceptance of the prototype speech-input interface.

  15. Light-curve solutions for S Cancri and TT Hydrae with rapid rotation

    NASA Technical Reports Server (NTRS)

    Van Hamme, W.; Wilson, R. E.

    1993-01-01

    Physical model light- and velocity-curve solutions for S Cancri and TT Hydrae are obtained, and analyses with incorporation of asynchronous rotation are carried out. A photometric rotation rate for the primary star of TT Hya is determined, and excellent agreement with results from spectral line profiles is found. Both separate light- and velocity-curve solutions and simultaneous light-velocity solutions are listed. The photometric rotation for S Cnc from existing light curves is indeterminate, but is compatible with line profile measures. Evidence for third light from the light curves of S Cnc is found. An explanation for the apparent conflict between the rotational states and mass-transfer activities of the two binaries is suggested.

  16. Applying the Technology Acceptance Model and flow theory to Cyworld user behavior: implication of the Web2.0 user acceptance.

    PubMed

    Shin, Dong-Hee; Kim, Won-Yong; Kim, Won-Young

    2008-06-01

    This study explores attitudinal and behavioral patterns when using Cyworld by adopting an expanded Technology Acceptance Model (TAM). A model for Cyworld acceptance is used to examine how various factors modified from the TAM influence acceptance and its antecedents. This model is examined through an empirical study involving Cyworld users using structural equation modeling techniques. The model shows reasonably good measurement properties and the constructs are validated. The results not only confirm the model but also reveal general factors applicable to Web2.0. A set of constructs in the model can be the Web2.0-specific factors, playing as enhancing factor to attitudes and intention.

  17. Craniofacial Reconstruction Using Rational Cubic Ball Curves

    PubMed Central

    Majeed, Abdul; Mt Piah, Abd Rahni; Gobithaasan, R. U.; Yahya, Zainor Ridzuan

    2015-01-01

    This paper proposes the reconstruction of craniofacial fracture using rational cubic Ball curve. The idea of choosing Ball curve is based on its robustness of computing efficiency over Bezier curve. The main steps are conversion of Digital Imaging and Communications in Medicine (Dicom) images to binary images, boundary extraction and corner point detection, Ball curve fitting with genetic algorithm and final solution conversion to Dicom format. The last section illustrates a real case of craniofacial reconstruction using the proposed method which clearly indicates the applicability of this method. A Graphical User Interface (GUI) has also been developed for practical application. PMID:25880632

  18. Testing and analysis of flat and curved panels with multiple cracks

    NASA Technical Reports Server (NTRS)

    Broek, David; Jeong, David Y.; Thomson, Douglas

    1994-01-01

    An experimental and analytical investigation of multiple cracking in various types of test specimens is described in this paper. The testing phase is comprised of a flat unstiffened panel series and curved stiffened and unstiffened panel series. The test specimens contained various configurations for initial damage. Static loading was applied to these specimens until ultimate failure, while loads and crack propagation were recorded. This data provides the basis for developing and validating methodologies for predicting linkup of multiple cracks, progression to failure, and overall residual strength. The results from twelve flat coupon and ten full scale curved panel tests are presented. In addition, an engineering analysis procedure was developed to predict multiple crack linkup. Reasonable agreement was found between predictions and actual test results for linkup and residual strength for both flat and curved panels. The results indicate that an engineering analysis approach has the potential to quantitatively assess the effect of multiple cracks in the arrest capability of an aircraft fuselage structure.

  19. Three-dimensional spatially curved local Bessel beams generated by metasurface

    NASA Astrophysics Data System (ADS)

    Liu, Dawei; Wu, Jiawen; Cheng, Bo; Li, Hongliang

    2018-03-01

    We propose a reflective metasurface based on an artificial admittance modulation surface to generate three-dimensional spatially curved beams. The phase acquisition utilized to modulate this sinusoidally varying surface admittance combines the enveloping theory of differential geometry and the method for producing two-dimensional Bessel beams. The metasurface is fabricated, and the comparison between the full-wave simulations and experimental results demonstrates good performance of three-dimensional spatially curved beams generated by the metasurface.

  20. Dark Energy Survey Year 1 Results: Curved-Sky Weak Lensing Mass Map

    DOE PAGES

    Chang, C.; Sheldon, E.; Pujol, A.; ...

    2018-01-04

    We construct the largest curved-sky galaxy weak lensing mass map to date from the DES firstyear (DES Y1) data. The map, about 10 times larger than previous work, is constructed over a contiguous ≈1;500 deg 2, covering a comoving volume of ≈10 Gpc 3. The effects of masking, sampling, and noise are tested using simulations. We generate weak lensing maps from two DES Y1 shear catalogs, METACALIBRATION and IM3SHAPE, with sources at redshift 0:2 < z < 1:3; and in each of four bins in this range. In the highest signal-to-noise map, the ratio between the mean signal-to-noise in themore » E-mode and the B-mode map is ~1.5 (~2) when smoothed with a Gaussian filter of sG =30 (80) arcminutes. The second and third moments of the convergence k in the maps are in agreement with simulations. We also find no significant correlation of k with maps of potential systematic contaminants. Finally, we demonstrate two applications of the mass maps: (1) cross-correlation with different foreground tracers of mass and (2) exploration of the largest peaks and voids in the maps.« less

  1. Dark Energy Survey Year 1 Results: Curved-Sky Weak Lensing Mass Map

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chang, C.; Sheldon, E.; Pujol, A.

    We construct the largest curved-sky galaxy weak lensing mass map to date from the DES firstyear (DES Y1) data. The map, about 10 times larger than previous work, is constructed over a contiguous ≈1;500 deg 2, covering a comoving volume of ≈10 Gpc 3. The effects of masking, sampling, and noise are tested using simulations. We generate weak lensing maps from two DES Y1 shear catalogs, METACALIBRATION and IM3SHAPE, with sources at redshift 0:2 < z < 1:3; and in each of four bins in this range. In the highest signal-to-noise map, the ratio between the mean signal-to-noise in themore » E-mode and the B-mode map is ~1.5 (~2) when smoothed with a Gaussian filter of sG =30 (80) arcminutes. The second and third moments of the convergence k in the maps are in agreement with simulations. We also find no significant correlation of k with maps of potential systematic contaminants. Finally, we demonstrate two applications of the mass maps: (1) cross-correlation with different foreground tracers of mass and (2) exploration of the largest peaks and voids in the maps.« less

  2. Troponin I levels from donors accepted for pediatric heart transplantation do not predict recipient graft survival.

    PubMed

    Lin, Kimberly Y; Sullivan, Patrick; Salam, Abdul; Kaufman, Beth; Paridon, Stephen; Hanna, Brian D; Spray, Thomas L; Weber, Janice; Shaddy, Robert

    2011-08-01

    Troponin I is often obtained during the evaluation of a potential transplant donor heart. It is not clear whether elevations in donor troponin I levels predict adverse outcomes and should thus preclude acceptance of a donor heart. This study examined whether troponin I levels from donors accepted for pediatric heart transplantation predicted graft failure. Deidentified data on heart transplants performed in recipients aged < 21 years between April 2007 and April 2009 was provided by the Organ Procurement and Transplantation Network. Donor troponin I level and recipient outcomes, including survival without retransplantation (graft survival), were examined for statistical correlation. Overall graft survival in 839 heart transplants was 81% at 2 years. At least 1 troponin I level was recorded in 657 donors before transplant, with a median value of 0.1 ng/ml (range, 0-50 ng/ml). Troponin I level and graft status were not correlated (p = 0.74). A receiver operating characteristic curve showed no association between troponin I and graft status (area under the curve, 0.51; p = 0.98). Graft survival did not differ significantly (p = 0.60) among quartiles of troponin I levels (<0.04, 0.04-<0.1, 0.1-<0.35, ≥ 0.35 ng/ml). A troponin I level ≥ 1 ng/ml was found in 74 transplanted donor hearts; graft survival was not associated with troponin I ≥ 1 (80%) vs < 1 (80%) at 2 years (p = 0.93). Troponin I values were not associated with post-transplant hospital length of stay (r = -0.06; p = 0.10). In donor hearts accepted for pediatric heart transplantation, troponin I elevation before procurement is not associated with increased graft failure. The significance of elevated troponin I levels, which occurs in many heart donors, remains unclear and should therefore be considered in the context of other clinical information. Copyright © 2011 International Society for Heart and Lung Transplantation. Published by Elsevier Inc. All rights reserved.

  3. Research of X-ray curved crystals analyzer

    NASA Astrophysics Data System (ADS)

    Xiao, Shali; Xong, Xian-cai; Qian, Jia-yu; Zhong, Xian-xin; Yan, Guo-hong; Liu, Zhong-li; Ding, Yong-kun

    2005-08-01

    X-ray spectrograph has long been used as a means of diagnosing conditions of laser-produced plasmas, as information concerning both the temperature and density can be extracted from the emitted radiation. For the measurement of X-ray lines in the energy range of 0.6-6 keV, A curved crystal X-ray spectrometer of reflection type elliptical geometry is required. In order to obtain both high resolution and collection efficiency the elliptical geometry is more advantageous than the flat configurations. Elliptical curved crystals spectrograph with a relatively wide spectral range are of particular use for deducing electron temperatures by measurement of the ratios of lines associated with different charge states. Curved crystals analyzer was designed and manufactured for use on an experiment to investigate the properties of laser produced plasmas. The spectrograph has 1350mm focal length and for these measurements, utilized PET, LIF, KAP and MICA crystal bent onto an elliptical substrate. This crystal analyzer covers the Bragg angel range from 30 to 67.5. The analyzer based on elliptically geometrical principle, which has self-focusing characteristics. The experiment was carried out on Shanghai Shengguang-II Facility and aimed to investigate the characteristics of a high density plasma. Experimental results using Curved crystal analyzer are described which show spectrum of Ti, Au laser-plasma. The focusing crystal analyzer clearly gave an increase in sensitivity over a flat crystal. Spectra showing the main resonance line were recorded with X-ray CCD and with laser energies 150J laser wavelength 350nm. The calculated wavelength resolution is about 500-1000.

  4. Nonlinear bulging factor based on R-curve data

    NASA Technical Reports Server (NTRS)

    Jeong, David Y.; Tong, Pin

    1994-01-01

    In this paper, a nonlinear bulging factor is derived using a strain energy approach combined with dimensional analysis. The functional form of the bulging factor contains an empirical constant that is determined using R-curve data from unstiffened flat and curved panel tests. The determination of this empirical constant is based on the assumption that the R-curve is the same for both flat and curved panels.

  5. LCC: Light Curves Classifier

    NASA Astrophysics Data System (ADS)

    Vo, Martin

    2017-08-01

    Light Curves Classifier uses data mining and machine learning to obtain and classify desired objects. This task can be accomplished by attributes of light curves or any time series, including shapes, histograms, or variograms, or by other available information about the inspected objects, such as color indices, temperatures, and abundances. After specifying features which describe the objects to be searched, the software trains on a given training sample, and can then be used for unsupervised clustering for visualizing the natural separation of the sample. The package can be also used for automatic tuning parameters of used methods (for example, number of hidden neurons or binning ratio). Trained classifiers can be used for filtering outputs from astronomical databases or data stored locally. The Light Curve Classifier can also be used for simple downloading of light curves and all available information of queried stars. It natively can connect to OgleII, OgleIII, ASAS, CoRoT, Kepler, Catalina and MACHO, and new connectors or descriptors can be implemented. In addition to direct usage of the package and command line UI, the program can be used through a web interface. Users can create jobs for ”training” methods on given objects, querying databases and filtering outputs by trained filters. Preimplemented descriptors, classifier and connectors can be picked by simple clicks and their parameters can be tuned by giving ranges of these values. All combinations are then calculated and the best one is used for creating the filter. Natural separation of the data can be visualized by unsupervised clustering.

  6. Application of Geodetic VLBI Data to Obtaining Long-Term Light Curves for Astrophysics

    NASA Technical Reports Server (NTRS)

    Kijima, Masachika

    2010-01-01

    The long-term light curve is important to research on binary black holes and disk instability in AGNs. The light curves have been drawn mainly using single dish data provided by the University of Michigan Radio Observatory and the Metsahovi Radio Observatory. Hence, thus far, we have to research on limited sources. I attempt to draw light curves using VLBI data for those sources that have not been monitored by any observatories with single dish. I developed software, analyzed all geodetic VLBI data available at the IVS Data Centers, and drew the light curves at 8 GHz. In this report, I show the tentative results for two AGNs. I compared two light curves of 4C39.25, which were drawn based on single dish data and on VLBI data. I confirmed that the two light curves were consistent. Furthermore, I succeeded in drawing the light curve of 0454-234 with VLBI data, which has not been monitored by any observatory with single dish. In this report, I suggest that the geodetic VLBI archive data is useful to obtain the long-term light curves at radio bands for astrophysics.

  7. A method to enhance the curve negotiation performance of HTS Maglev

    NASA Astrophysics Data System (ADS)

    Che, T.; Gou, Y. F.; Deng, Z. G.; Zheng, J.; Zheng, B. T.; Chen, P.

    2015-09-01

    High temperature superconducting (HTS) Maglev has attracted more and more attention due to its special self-stable characteristic, and much work has been done to achieve its actual application, but the research about the curve negotiation is not systematic and comprehensive. In this paper, we focused on the change of the lateral displacements of the Maglev vehicle when going through curves under different velocities, and studied the change of the electromagnetic forces through experimental methods. Experimental results show that setting an appropriate initial eccentric distance (ED), which is the distance between the center of the bulk unit and the center of the permanent magnet guideway (PMG), when cooling the bulks is favorable for the Maglev system’s curve negotiation. This work will provide some available suggestions for improving the curve negotiation performance of the HTS Maglev system.

  8. Electro-Mechanical Resonance Curves

    NASA Astrophysics Data System (ADS)

    Greenslade, Thomas B.

    2018-03-01

    Recently I have been investigating the frequency response of galvanometers. These are direct-current devices used to measure small currents. By using a low-frequency function generator to supply the alternating-current signal and a stopwatch smartphone app to measure the period, I was able to take data to allow a resonance curve to be drawn. This is the sort of project that should provide a fascinating research experience for the introductory physics student. In this article I will discuss the galvanometers that I used in this work, and will show a resonance curve for one of them.

  9. ROC-ing along: Evaluation and interpretation of receiver operating characteristic curves.

    PubMed

    Carter, Jane V; Pan, Jianmin; Rai, Shesh N; Galandiuk, Susan

    2016-06-01

    It is vital for clinicians to understand and interpret correctly medical statistics as used in clinical studies. In this review, we address current issues and focus on delivering a simple, yet comprehensive, explanation of common research methodology involving receiver operating characteristic (ROC) curves. ROC curves are used most commonly in medicine as a means of evaluating diagnostic tests. Sample data from a plasma test for the diagnosis of colorectal cancer were used to generate a prediction model. These are actual, unpublished data that have been used to describe the calculation of sensitivity, specificity, positive predictive and negative predictive values, and accuracy. The ROC curves were generated to determine the accuracy of this plasma test. These curves are generated by plotting the sensitivity (true-positive rate) on the y axis and 1 - specificity (false-positive rate) on the x axis. Curves that approach closest to the coordinate (x = 0, y = 1) are more highly predictive, whereas ROC curves that lie close to the line of equality indicate that the result is no better than that obtained by chance. The optimum sensitivity and specificity can be determined from the graph as the point where the minimum distance line crosses the ROC curve. This point corresponds to the Youden index (J), a function of sensitivity and specificity used commonly to rate diagnostic tests. The area under the curve is used to quantify the overall ability of a test to discriminate between 2 outcomes. By following these simple guidelines, interpretation of ROC curves will be less difficult and they can then be interpreted more reliably when writing, reviewing, or analyzing scientific papers. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. A kill curve for Phanerozoic marine species

    NASA Technical Reports Server (NTRS)

    Raup, D. M.

    1991-01-01

    A kill curve for Phanerozoic species is developed from an analysis of the stratigraphic ranges of 17,621 genera, as compiled by Sepkoski. The kill curve shows that a typical species' risk of extinction varies greatly, with most time intervals being characterized by very low risk. The mean extinction rate of 0.25/m.y. is thus a mixture of long periods of negligible extinction and occasional pulses of much higher rate. Because the kill curve is merely a description of the fossil record, it does not speak directly to the causes of extinction. The kill curve may be useful, however, to li inverted question markmit choices of extinction mechanisms.

  11. Particle Detectors in the Theory of Quantum Fields on Curved Spacetimes

    NASA Astrophysics Data System (ADS)

    Cant, John Fraser

    This work discusses aspects of a fundamental problem in the theory of quantum fields on curved spacetimes--that of giving physical meaning to the particle representations of the theory. In particular, the response of model particle detectors is analysed in detail. Unruh (1976) first introduced the idea of a model particle detector in order to give an operational definition to particles. He found that even in flat spacetime, the excitation of a particle detector does not necessarily correspond to the presence of an energy carrier--an accelerating detector will excite in response to the zero-energy state of the Minkowski vacuum. The central question I consider in this work is --where does the energy for the excitation of the accelerating detector come from? The accepted response has been that the accelerating force provides the energy. Evaluating the energy carried by the (conformally-invariant massless scalar) field after the interaction with the detector, however, I find that the detector excitation is compensated by an equal but opposite emission of negative energy. This result suggests that there may be states of lesser energy than that of the Minkowski vacuum. To resolve this paradox, I argue that the emission of a detector following a more realistic trajectory than that of constant acceleration--one that starts and finishes in inertial motion--will in total be positive, although during periods of constant acceleration the detector will still emit negative energy. The Minkowski vacuum retains its status as the field state of lowest energy. The second question I consider is the response of Unruh's detector in curved spacetime--is it possible to use such a detector to measure the energy carried by the field? In the particular case of a detector following a Killing trajectory, I find that there is a response to the energy of the field, but that there is also an inherent 'noise'. In a two dimensional model spacetime, I show that this 'noise' depends on the detector

  12. High acceptability for cell phone text messages to improve communication of laboratory results with HIV-infected patients in rural Uganda: a cross-sectional survey study.

    PubMed

    Siedner, Mark J; Haberer, Jessica E; Bwana, Mwebesa Bosco; Ware, Norma C; Bangsberg, David R

    2012-06-21

    Patient-provider communication is a major challenge in resource-limited settings with large catchment areas. Though mobile phone usership increased 20-fold in Africa over the past decade, little is known about acceptability of, perceptions about disclosure and confidentiality, and preferences for cell phone communication of health information in the region. We performed structured interviews of fifty patients at the Immune Suppression Syndrome clinic in Mbarara, Uganda to assess four domains of health-related communication: a) cell phone use practices and literacy, b) preferences for laboratory results communication, c) privacy and confidentiality, and d) acceptability of and preferences for text messaging to notify patients of abnormal test results. Participants had a median of 38 years, were 56% female, and were residents of a large catchment area throughout southwestern Uganda. All participants expressed interest in a service to receive information about laboratory results by cell phone text message, stating benefits of increased awareness of their health and decreased transportation costs. Ninety percent reported that they would not be concerned for unintended disclosure. A minority additionally expressed concerns about difficulty interpreting messages, discouragement upon learning bad news, and technical issues. Though all respondents expressed interest in password protection of messages, there was also a strong desire for direct messages to limit misinterpretation of information. Cell phone text messaging for communication of abnormal laboratory results is highly acceptable in this cohort of HIV-infected patients in rural Uganda. The feasibility of text messaging, including an optimal balance between privacy and comprehension, should be further studied.

  13. Infant acceptance of breast milk after maternal exercise.

    PubMed

    Wright, Kc S; Quinn, Timothy J; Carey, Gale B

    2002-04-01

    Previous research reported that breast milk lactic acid (LA) levels increase after lactating women complete a bout of exhaustive exercise, resulting in poor infant acceptance of the postexercise breast milk. This highly publicized finding may not apply to more practical, everyday exercise conditions of lactating women. The purpose of the present study was to reexamine the composition and infant acceptance of postexercise breast milk while controlling maternal diet, exercise intensity, and the method, timing, and assessment of infant feeding. Twenty-four women, 2 to 4 months' postpartum, completed 3 test sessions: a maximal oxygen uptake test, a 30-minute bout of moderate exercise, and a resting control session. One hour before and 1 hour after each session, participants fully expressed their milk, placed it in a bottle familiar to the infant, fed their infant, and rated their infant's acceptance of the milk. Each feeding was videotaped and viewed individually by 3 lactation consultants who rated infant acceptance; consultants were blinded to the test sessions. Milk was analyzed for LA and infant milk consumption was measured. There were no differences in presession versus postsession values for maternal skin temperature, breast milk temperature, and infant milk acceptance as judged by either the mothers or lactation consultants. These results prevailed despite a small but significant increase in breast milk LA premaximal versus postmaximal exercise (0.09 vs 0.21 mM, respectively); there was no difference in milk LA premoderate versus postmoderate exercise, or prerest versus postrest. These data support the hypothesis that moderate or even high-intensity exercise during lactation does not impede infant acceptance of breast milk consumed 1 hour postexercise.

  14. Ring polymer dynamics in curved spaces

    NASA Astrophysics Data System (ADS)

    Wolf, S.; Curotto, E.

    2012-07-01

    We formulate an extension of the ring polymer dynamics approach to curved spaces using stereographic projection coordinates. We test the theory by simulating the particle in a ring, {T}^1, mapped by a stereographic projection using three potentials. Two of these are quadratic, and one is a nonconfining sinusoidal model. We propose a new class of algorithms for the integration of the ring polymer Hamilton equations in curved spaces. These are designed to improve the energy conservation of symplectic integrators based on the split operator approach. For manifolds, the position-position autocorrelation function can be formulated in numerous ways. We find that the position-position autocorrelation function computed from configurations in the Euclidean space {R}^2 that contains {T}^1 as a submanifold has the best statistical properties. The agreement with exact results obtained with vector space methods is excellent for all three potentials, for all values of time in the interval simulated, and for a relatively broad range of temperatures.

  15. Study of the Vapor-Liquid Coexistence Curve and the Critical Curve for Nonazeotropic Refrigerant Mixture R152a + R114 System

    NASA Astrophysics Data System (ADS)

    Kabata, Yasuo; Higashi, Yukihiro; Uematsu, Masahiko; Watanabe, Koichi

    Measurements of the vapor-liquid coexistence curve in the critical region for the refrigerant mixture of R152a (CH3CHF2: 1, l-difluoroethane) +R 114 (CCIF2CCIF2 :1, 2-dichloro-1, 1, 2, 2-tetrafluoroethane) system were made by visual observation of the disappearance of the meniscus at the vapor-liquid interface within an optical cell. Forty-eight saturated densities along the vapor-liquid coexistence curve between 204 and 861 kg·m-3 for five different compositions of 10, 20, 50, 80 and 90 wt% R 152a were obtained in the temperature range 370 to 409 K. The experimental errors of temperature, density, and mass fraction were estimated within ±10mK, ±0.5% and +0.05 %, respectively. On the basis of these measurements, the critical parameters of five different compositions for the R 152a +R 114 system were determined in consideration of the meniscus disappearance level as well as intensity of the critical opalescence. In accordance with the previous results of three other refrigerant mixtures, i.e., R 12 +R 22 system, R 22 +R 114 system and R 13B1 + R 114 system, the coexistence curve and critical curve on the temperature-density diagram for binary refrigerant mixtures were discussed. In addition, correlations of its composition dependence for this system were proposed.

  16. Modelling rating curves using remotely sensed LiDAR data

    USGS Publications Warehouse

    Nathanson, Marcus; Kean, Jason W.; Grabs, Thomas J.; Seibert, Jan; Laudon, Hjalmar; Lyon, Steve W.

    2012-01-01

    Accurate stream discharge measurements are important for many hydrological studies. In remote locations, however, it is often difficult to obtain stream flow information because of the difficulty in making the discharge measurements necessary to define stage-discharge relationships (rating curves). This study investigates the feasibility of defining rating curves by using a fluid mechanics-based model constrained with topographic data from an airborne LiDAR scanning. The study was carried out for an 8m-wide channel in the boreal landscape of northern Sweden. LiDAR data were used to define channel geometry above a low flow water surface along the 90-m surveyed reach. The channel topography below the water surface was estimated using the simple assumption of a flat streambed. The roughness for the modelled reach was back calculated from a single measurment of discharge. The topographic and roughness information was then used to model a rating curve. To isolate the potential influence of the flat bed assumption, a 'hybrid model' rating curve was developed on the basis of data combined from the LiDAR scan and a detailed ground survey. Whereas this hybrid model rating curve was in agreement with the direct measurements of discharge, the LiDAR model rating curve was equally in agreement with the medium and high flow measurements based on confidence intervals calculated from the direct measurements. The discrepancy between the LiDAR model rating curve and the low flow measurements was likely due to reduced roughness associated with unresolved submerged bed topography. Scanning during periods of low flow can help minimize this deficiency. These results suggest that combined ground surveys and LiDAR scans or multifrequency LiDAR scans that see 'below' the water surface (bathymetric LiDAR) could be useful in generating data needed to run such a fluid mechanics-based model. This opens a realm of possibility to remotely sense and monitor stream flows in channels in remote

  17. Growth curves for twins in Slovenia.

    PubMed

    Bricelj, Katja; Blickstein, Isaac; Bržan-Šimenc, Gabrijela; Janša, Vid; Lučovnik, Miha; Verdenik, Ivan; Trojner-Bregar, Andreja; Tul, Nataša

    2017-02-01

    Abnormalities of fetal growth are more common in twins. We introduce the growth curves for monitoring fetal growth in twin pregnancies in Slovenia. Slovenian National Perinatal Information System for the period between 2002 and 2010 was used to calculate birth weight percentiles for all live born twins for each week from 22nd to 40th week. The calculated percentiles of birth weight for all live-born twins in Slovenia served as the basis for drawing 'growth' curves. The calculated growth curves for twins will help accurately diagnose small or large twin fetuses for their gestational age in the native central European population.

  18. LONG-TERM LIGHT CURVE OF HIGHLY VARIABLE PROTOSTELLAR STAR GM CEP

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Xiao Limin; Kroll, Peter; Henden, Arne A.

    2010-04-15

    We present data from the archival plates at Harvard College Observatory and Sonneberg Observatory showing the field of the solar-type pre-main-sequence star GM Cep. A total of 186 magnitudes of GM Cep have been measured on these archival plates, with 176 in blue sensitivity, six in visible, and four in red. We combine our data with data from the literature and from the American Association of Variable Star Observers to depict the long-term light curves of GM Cep in both B and V wavelengths. The light curves span from 1895 until now, with two densely sampled regions (1935-1945 in themore » B band, and 2006 until now in the V band). The long-term light curves do not show any fast rise behavior as predicted by an accretion mechanism. Both the light curves and the magnitude histograms confirm the conclusion that the light curves are dominated by dips (possibly from extinction) superposed on some quiescence state, instead of outbursts caused by accretion flares. Our result excludes the possibility of GM Cep being a FUor, EXor, or McNeil's Nebula-type star. Several special cases of T Tauri stars were checked, but none of these light curves were compatible with that of GM Cep. The lack of periodicity in the light curve excludes the possibility of GM Cep being a KH 15D system.« less

  19. Localized Principal Component Analysis based Curve Evolution: A Divide and Conquer Approach

    PubMed Central

    Appia, Vikram; Ganapathy, Balaji; Yezzi, Anthony; Faber, Tracy

    2014-01-01

    We propose a novel localized principal component analysis (PCA) based curve evolution approach which evolves the segmenting curve semi-locally within various target regions (divisions) in an image and then combines these locally accurate segmentation curves to obtain a global segmentation. The training data for our approach consists of training shapes and associated auxiliary (target) masks. The masks indicate the various regions of the shape exhibiting highly correlated variations locally which may be rather independent of the variations in the distant parts of the global shape. Thus, in a sense, we are clustering the variations exhibited in the training data set. We then use a parametric model to implicitly represent each localized segmentation curve as a combination of the local shape priors obtained by representing the training shapes and the masks as a collection of signed distance functions. We also propose a parametric model to combine the locally evolved segmentation curves into a single hybrid (global) segmentation. Finally, we combine the evolution of these semilocal and global parameters to minimize an objective energy function. The resulting algorithm thus provides a globally accurate solution, which retains the local variations in shape. We present some results to illustrate how our approach performs better than the traditional approach with fully global PCA. PMID:25520901

  20. Fermat's Technique of Finding Areas under Curves

    ERIC Educational Resources Information Center

    Staples, Ed

    2004-01-01

    Perhaps next time teachers head towards the fundamental theorem of calculus in their classroom, they may wish to consider Fermat's technique of finding expressions for areas under curves, beautifully outlined in Boyer's History of Mathematics. Pierre de Fermat (1601-1665) developed some important results in the journey toward the discovery of the…

  1. Catmull-Rom Curve Fitting and Interpolation Equations

    ERIC Educational Resources Information Center

    Jerome, Lawrence

    2010-01-01

    Computer graphics and animation experts have been using the Catmull-Rom smooth curve interpolation equations since 1974, but the vector and matrix equations can be derived and simplified using basic algebra, resulting in a simple set of linear equations with constant coefficients. A variety of uses of Catmull-Rom interpolation are demonstrated,…

  2. Exact BPF and FBP algorithms for nonstandard saddle curves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu Hengyong; Zhao Shiying; Ye Yangbo

    2005-11-15

    A hot topic in cone-beam CT research is exact cone-beam reconstruction from a general scanning trajectory. Particularly, a nonstandard saddle curve attracts attention, as this construct allows the continuous periodic scanning of a volume-of-interest (VOI). Here we evaluate two algorithms for reconstruction from data collected along a nonstandard saddle curve, which are in the filtered backprojection (FBP) and backprojection filtration (BPF) formats, respectively. Both the algorithms are implemented in a chord-based coordinate system. Then, a rebinning procedure is utilized to transform the reconstructed results into the natural coordinate system. The simulation results demonstrate that the FBP algorithm produces better imagemore » quality than the BPF algorithm, while both the algorithms exhibit similar noise characteristics.« less

  3. Fabrication of anodic aluminium oxide templates on curved surfaces.

    PubMed

    Yin, Aijun; Guico, Rodney S; Xu, Jimmy

    2007-01-24

    Aluminium anodization provides a simple and inexpensive way to obtain nanoporous templates with uniform and controllable pore diameters and periods over a wide range. Moreover, one of the interesting possibilities afforded by the anodization process is that the anodization can take place on arbitrary surfaces, such as curved surfaces, which has not yet been well studied or applied in nanofabrication. In this paper, we characterize the anodization of Al films on silicon substrates with a curved top surface. The structures of the resultant anodic aluminium oxide (AAO) films are examined by scanning electron microscopy. Unique features including cessation, bending, and branching of pore channels are observed in the curved area. Possible growth mechanisms are proposed, which can also contribute to the understanding of the self-organization mechanism in the formation of porous AAO membranes. The new structures may open new opportunities in optical, electronic and electrochemical applications.

  4. Modeling the impact of spatial relationships on horizontal curve safety.

    PubMed

    Findley, Daniel J; Hummer, Joseph E; Rasdorf, William; Zegeer, Charles V; Fowler, Tyler J

    2012-03-01

    The curved segments of roadways are more hazardous because of the additional centripetalforces exerted on a vehicle, driver expectations, and other factors. The safety of a curve is dependent on various factors, most notably by geometric factors, but the location of a curve in relation to other curves is also thought to influence the safety of those curves because of a driver's expectation to encounter additional curves. The link between an individual curve's geometric characteristics and its safety performance has been established, but spatial considerations are typically not included in a safety analysis. The spatial considerations included in this research consisted of four components: distance to adjacent curves, direction of turn of the adjacent curves, and radius and length of the adjacent curves. The primary objective of this paper is to quantify the spatial relationship between adjacent horizontal curves and horizontal curve safety using a crash modification factor. Doing so enables a safety professional to more accurately estimate safety to allocate funding to reduce or prevent future collisions and more efficiently design new roadway sections to minimize crash risk where there will be a series of curves along a route. The most important finding from this research is the statistical significance of spatial considerations for the prediction of horizontal curve safety. The distances to adjacent curves were found to be a reliable predictor of observed collisions. This research recommends a model which utilizes spatial considerations for horizontal curve safety prediction in addition to current Highway Safety Manual prediction capabilities using individual curve geometric features. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. Relating (Un)acceptability to Interpretation. Experimental Investigations on Negation

    PubMed Central

    Etxeberria, Urtzi; Tubau, Susagna; Deprez, Viviane; Borràs-Comes, Joan; Espinal, M. Teresa

    2018-01-01

    Although contemporary linguistic studies routinely use unacceptable sentences to determine the boundary of what falls outside the scope of grammar, investigations far more rarely take into consideration the possible interpretations of such sentences, perhaps because these interpretations are commonly prejudged as irrelevant or unreliable across speakers. In this paper we provide the results of two experiments in which participants had to make parallel acceptability and interpretation judgments of sentences presenting various types of negative dependencies in Basque and in two varieties of Spanish (Castilian Spanish and Basque Country Spanish). Our results show that acceptable sentences are uniformly assigned a single negation reading in the two languages. However, while unacceptable sentences consistently convey single negation in Basque, they are interpreted at chance in both varieties of Spanish. These results confirm that judgment data that distinguish between acceptable and unacceptable negative utterances can inform us not only about an adult’s grammar of his/her particular language but also about interesting cross-linguistic differences. We conclude that the acceptability and interpretation of (un)grammatical negative sentences can serve linguistic theory construction by helping to disentangle basic assumptions about the nature of various negative dependencies. PMID:29456515

  6. A curved surface micro-moiré method and its application in evaluating curved surface residual stress

    NASA Astrophysics Data System (ADS)

    Zhang, Hongye; Wu, Chenlong; Liu, Zhanwei; Xie, Huimin

    2014-09-01

    The moiré method is typically applied to the measurement of deformations of a flat surface while, for a curved surface, this method is rarely used other than for projection moiré or moiré interferometry. Here, a novel colour charge-coupled device (CCD) micro-moiré method has been developed, based on which a curved surface micro-moiré (CSMM) method is proposed with a colour CCD and optical microscope (OM). In the CSMM method, no additional reference grating is needed as a Bayer colour filter array (CFA) installed on the OM in front of the colour CCD image sensor performs this role. Micro-moiré fringes with high contrast are directly observed with the OM through the Bayer CFA under the special condition of observing a curved specimen grating. The principle of the CSMM method based on a colour CCD micro-moiré method and its application range and error analysis are all described in detail. In an experiment, the curved surface residual stress near a welded seam on a stainless steel tube was investigated using the CSMM method.

  7. User acceptance of mobile health services from users' perspectives: The role of self-efficacy and response-efficacy in technology acceptance.

    PubMed

    Zhang, Xiaofei; Han, Xiaocui; Dang, Yuanyuan; Meng, Fanbo; Guo, Xitong; Lin, Jiayue

    2017-03-01

    With the swift emergence of electronic medical information, the global popularity of mobile health (mHealth) services continues to increase steadily. This study aims to investigate the efficacy factors that directly or indirectly influence individuals' acceptance of mHealth services. Based on the technology acceptance model, this research incorporates efficacy factors into the acceptance decision process. A research model was proposed involving the direct and indirect effects of self-efficacy and response-efficacy on acceptance intention, along with their moderating effects. The model and hypotheses were validated using data collected from a field survey of 650 potential service users. The results reveal that: (1) self-efficacy and response-efficacy are both positively associated with perceived ease of use; and (2) self-efficacy and response-efficacy moderate the impact of perceived usefulness toward adoption intention. Self-efficacy and response-efficacy both play an important role in individuals' acceptance of mHealth services, which not only affect their perceived ease of use of mHealth services, but also positively moderate the effects of perceived usefulness on adoption intention. Our findings serve to provide recommendations that are specifically customized for mHealth service providers and their marketers.

  8. SU-F-T-313: Clinical Results of a New Customer Acceptance Test for Elekta VMAT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rusk, B; Fontenot, J

    Purpose: To report the results of a customer acceptance test (CAT) for VMAT treatments for two matched Elekta linear accelerators. Methods: The CAT tests were performed on two clinically matched Elekta linear accelerators equipped with a 160-leaf MLC. Functional tests included performance checks of the control system during dynamic movements of the diaphragms, MLC, and gantry. Dosimetric tests included MLC picket fence tests at static and variable dose rates and a diaphragm alignment test, all performed using the on-board EPID. Additionally, beam symmetry during arc delivery was measured at the four cardinal angles for high and low dose rate modesmore » using a 2D detector array. Results of the dosimetric tests were analyzed using the VMAT CAT analysis tool. Results: Linear accelerator 1 (LN1) met all stated CAT tolerances. Linear accelerator 2 (LN2) passed the geometric, beam symmetry, and MLC position error tests but failed the relative dose average test for the diaphragm abutment and all three picket fence fields. Though peak doses in the abutment regions were consistent, the average dose was below the stated tolerance corresponding to a leaf junction that was too narrow. Despite this, no significant differences in patient specific VMAT quality assurance measured were observed between the accelerators and both passed monthly MLC quality assurance performed with the Hancock test. Conclusion: Results from the CAT showed LN2 with relative dose averages in the abutment regions of the diaphragm and MLC tests outside the tolerances resulting from differences in leaf gap distances. Tolerances of the dose average tests from the CAT may be small enough to detect MLC errors which do not significantly affect patient QA or the routine MLC tests.« less

  9. Symmetry Properties of Potentiometric Titration Curves.

    ERIC Educational Resources Information Center

    Macca, Carlo; Bombi, G. Giorgio

    1983-01-01

    Demonstrates how the symmetry properties of titration curves can be efficiently and rigorously treated by means of a simple method, assisted by the use of logarithmic diagrams. Discusses the symmetry properties of several typical titration curves, comparing the graphical approach and an explicit mathematical treatment. (Author/JM)

  10. Results of the Updated NASA Kennedy Space Center 50-MHz Doppler Radar Wind Profiler Operational Acceptance Test

    NASA Technical Reports Server (NTRS)

    Barbre', Robert E., Jr.; Deker, Ryan K.; Leahy, Frank B.; Huddleston, Lisa

    2016-01-01

    We present here the methodology and results of the Operational Acceptance Test (OAT) performed on the new Kennedy Space Center (KSC) 50-MHz Doppler Radar Wind Profiler (DRWP). On day-of-launch (DOL), space launch vehicle operators have used data from the DRWP to invalidate winds in prelaunch loads and trajectory assessments due to the DRWP's capability to quickly identify changes in the wind profile within a rapidly-changing wind environment. The previous DRWP has been replaced with a completely new system, which needs to undergo certification testing before being accepted for use in range operations. The new DRWP replaces the previous three-beam system made of coaxial cables and a copper wire ground plane with a four-beam system that uses Yagi antennae with enhanced beam steering capability. In addition, the new system contains updated user interface software while maintaining the same general capability as the previous system. The new DRWP continues to use the Median Filter First Guess (MFFG) algorithm to generate a wind profile from Doppler spectra at each range gate. DeTect (2015) contains further details on the upgrade. The OAT is a short-term test designed so that end users can utilize the new DRWP in a similar manner to the previous DRWP during mission operations at the Eastern Range in the midst of a long-term certification process. This paper describes the Marshall Space Flight Center Natural Environments Branch's (MSFC NE's) analyses to verify the quality and accuracy of the DRWP's meteorological data output as compared to the previous DRWP. Ultimately, each launch vehicle program has the responsibility to certify the system for their own use.

  11. Staff Acceptance of Tele-ICU Coverage

    PubMed Central

    Chan, Paul S.; Cram, Peter

    2011-01-01

    Background: Remote coverage of ICUs is increasing, but staff acceptance of this new technology is incompletely characterized. We conducted a systematic review to summarize existing research on acceptance of tele-ICU coverage among ICU staff. Methods: We searched for published articles pertaining to critical care telemedicine systems (aka, tele-ICU) between January 1950 and March 2010 using PubMed, Cumulative Index to Nursing and Allied Health Literature, Global Health, Web of Science, and the Cochrane Library and abstracts and presentations delivered at national conferences. Studies were included if they provided original qualitative or quantitative data on staff perceptions of tele-ICU coverage. Studies were imported into content analysis software and coded by tele-ICU configuration, methodology, participants, and findings (eg, positive and negative staff evaluations). Results: Review of 3,086 citations yielded 23 eligible studies. Findings were grouped into four categories of staff evaluation: overall acceptance level of tele-ICU coverage (measured in 70% of studies), impact on patient care (measured in 96%), impact on staff (measured in 100%), and organizational impact (measured in 48%). Overall acceptance was high, despite initial ambivalence. Favorable impact on patient care was perceived by > 82% of participants. Staff impact referenced enhanced collaboration, autonomy, and training, although scrutiny, malfunctions, and contradictory advice were cited as potential barriers. Staff perceived the organizational impact to vary. An important limitation of available studies was a lack of rigorous methodology and validated survey instruments in many studies. Conclusions: Initial reports suggest high levels of staff acceptance of tele-ICU coverage, but more rigorous methodologic study is required. PMID:21051386

  12. Curved-stem Hip Resurfacing

    PubMed Central

    2008-01-01

    Hip resurfacing is an attractive concept because it preserves rather than removes the femoral head and neck. Most early designs had high failure rates, but one unique design had a femoral stem. Because that particular device appeared to have better implant survival, this study assessed the clinical outcome and long-term survivorship of a hip resurfacing prosthesis. Four hundred forty-five patients (561 hips) were retrospectively reviewed after a minimum of 20 years’ followup or until death; 23 additional patients were lost to followup. Patients received a metal femoral prosthesis with a small curved stem. Three types of acetabular reconstructions were used: (1) cemented polyurethane; (2) metal-on-metal; and (3) polyethylene secured with cement or used as the liner of a two-piece porous-coated implant. Long-term results were favorable with the metal-on-metal combination only. The mean overall Harris hip score was 92 at 2 years of followup. None of the 121 patients (133 hips) who received metal-on-metal articulation experienced failure. The failure rate with polyurethane was 100%, and the failure rate with cemented polyethylene was 41%. Hip resurfacing with a curved-stem femoral component had a durable clinical outcome when a metal-on-metal articulation was used. Level of Evidence: Level IV, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence. PMID:18338217

  13. Psychological abuse, mental health, and acceptance of dating violence among adolescents

    PubMed Central

    Temple, Jeff R.; Choi, Hye Jeong; Elmquist, JoAnna; Hecht, Michael; Miller-Day, Michelle; Stuart, Gregory L.; Brem, Meagan; Wolford-Clevenger, Caitlin

    2016-01-01

    Purpose Existing literature indicates that acceptance of dating violence is a significant and robust risk factor for psychological dating abuse perpetration. Past work also indicates a significant relationship between psychological dating abuse perpetration and poor mental health. However, no known research has examined the relationship between acceptance of dating violence, perpetration of dating abuse, and mental health. In addition to exploring this complex relationship, the current study examines whether psychological abuse perpetration mediates the relationship between acceptance of dating violence and mental health (i.e., internalizing symptoms of depression, anxiety, and hostility). Methods Three waves of longitudinal data were obtained from 1,042 ethnically diverse high school students in Texas. Participants completed assessments of psychological dating abuse perpetration, acceptance of dating violence, and internalizing symptoms (hostility, and symptoms of anxiety and depression). Results As predicted, results indicated that perpetration of psychological abuse was significantly associated with acceptance of dating violence and all internalizing symptoms. Furthermore, psychological abuse mediated the relationship between acceptance of dating violence and internalizing symptoms. Conclusions Findings from the current study suggest that acceptance of dating violence is an important target for the prevention of dating violence and related emotional distress. Implications and Contribution Study findings indicate that perpetration of psychological abuse is significantly associated with acceptance of dating violence and select mental health variables (i.e., anxiety, depression, hostility). Moreover, psychological abuse perpetration mediated the relationship between acceptance of dating violence and internalizing symptoms. To be effective in preventing mental health problems, interventions may benefit from targeting acceptance and perpetration of dating violence

  14. Holomorphic curves in surfaces of general type.

    PubMed Central

    Lu, S S; Yau, S T

    1990-01-01

    This note answers some questions on holomorphic curves and their distribution in an algebraic surface of positive index. More specifically, we exploit the existence of natural negatively curved "pseudo-Finsler" metrics on a surface S of general type whose Chern numbers satisfy c(2)1>2c2 to show that a holomorphic map of a Riemann surface to S whose image is not in any rational or elliptic curve must satisfy a distance decreasing property with respect to these metrics. We show as a consequence that such a map extends over isolated punctures. So assuming that the Riemann surface is obtained from a compact one of genus q by removing a finite number of points, then the map is actually algebraic and defines a compact holomorphic curve in S. Furthermore, the degree of the curve with respect to a fixed polarization is shown to be bounded above by a multiple of q - 1 irrespective of the map. PMID:11607050

  15. The South Carolina bridge-scour envelope curves

    USGS Publications Warehouse

    Benedict, Stephen T.; Feaster, Toby D.; Caldwell, Andral W.

    2016-09-30

    The U.S. Geological Survey, in cooperation with the South Carolina Department of Transportation, conducted a series of three field investigations to evaluate historical, riverine bridge scour in the Piedmont and Coastal Plain regions of South Carolina. These investigations included data collected at 231 riverine bridges, which lead to the development of bridge-scour envelope curves for clear-water and live-bed components of scour. The application and limitations of the South Carolina bridge-scour envelope curves were documented in four reports, each report addressing selected components of bridge scour. The current investigation (2016) synthesizes the findings of these previous reports into a guidance manual providing an integrated procedure for applying the envelope curves. Additionally, the investigation provides limited verification for selected bridge-scour envelope curves by comparing them to field data collected outside of South Carolina from previously published sources. Although the bridge-scour envelope curves have limitations, they are useful supplementary tools for assessing the potential for scour at riverine bridges in South Carolina.

  16. Comparison of two methods to determine fan performance curves using computational fluid dynamics

    NASA Astrophysics Data System (ADS)

    Onma, Patinya; Chantrasmi, Tonkid

    2018-01-01

    This work investigates a systematic numerical approach that employs Computational Fluid Dynamics (CFD) to obtain performance curves of a backward-curved centrifugal fan. Generating the performance curves requires a number of three-dimensional simulations with varying system loads at a fixed rotational speed. Two methods were used and their results compared to experimental data. The first method incrementally changes the mass flow late through the inlet boundary condition while the second method utilizes a series of meshes representing the physical damper blade at various angles. The generated performance curves from both methods are compared with an experiment setup in accordance with the AMCA fan performance testing standard.

  17. Euthanasia Acceptance: An Attitudinal Inquiry.

    ERIC Educational Resources Information Center

    Klopfer, Fredrick J.; Price, William F.

    The study presented was conducted to examine potential relationships between attitudes regarding the dying process, including acceptance of euthanasia, and other attitudinal or demographic attributes. The data of the survey was comprised of responses given by 331 respondents to a door-to-door interview. Results are discussed in terms of preferred…

  18. The learning curve of laparoscopic holecystectomy in general surgery resident training: old age of the patient may be a risk factor?

    PubMed

    Ferrarese, Alessia; Gentile, Valentina; Bindi, Marco; Rivelli, Matteo; Cumbo, Jacopo; Solej, Mario; Enrico, Stefano; Martino, Valter

    2016-01-01

    A well-designed learning curve is essential for the acquisition of laparoscopic skills: but, are there risk factors that can derail the surgical method? From a review of the current literature on the learning curve in laparoscopic surgery, we identified learning curve components in video laparoscopic cholecystectomy; we suggest a learning curve model that can be applied to assess the progress of general surgical residents as they learn and master the stages of video laparoscopic cholecystectomy regardless of type of patient. Electronic databases were interrogated to better define the terms "surgeon", "specialized surgeon", and "specialist surgeon"; we surveyed the literature on surgical residency programs outside Italy to identify learning curve components, influential factors, the importance of tutoring, and the role of reference centers in residency education in surgery. From the definition of acceptable error, self-efficacy, and error classification, we devised a learning curve model that may be applied to training surgical residents in video laparoscopic cholecystectomy. Based on the criteria culled from the literature, the three surgeon categories (general, specialized, and specialist) are distinguished by years of experience, case volume, and error rate; the patients were distinguished for years and characteristics. The training model was constructed as a series of key learning steps in video laparoscopic cholecystectomy. Potential errors were identified and the difficulty of each step was graded using operation-specific characteristics. On completion of each procedure, error checklist scores on procedure-specific performance are tallied to track the learning curve and obtain performance indices of measurement that chart the trainee's progress. The concept of the learning curve in general surgery is disputed. The use of learning steps may enable the resident surgical trainee to acquire video laparoscopic cholecystectomy skills proportional to the instructor

  19. Analytical drafting curves provide exact equations for plotted data

    NASA Technical Reports Server (NTRS)

    Stewart, R. B.

    1967-01-01

    Analytical drafting curves provide explicit mathematical expressions for any numerical data that appears in the form of graphical plots. The curves each have a reference coordinate axis system indicated on the curve as well as the mathematical equation from which the curve was generated.

  20. Consumer acceptance of an extruded soy-based high-protein breakfast cereal.

    PubMed

    Yeu, K; Lee, Y; Lee, S-Y

    2008-01-01

    Studies have shown the beneficial effects of soy and high-protein diets on weight loss. The objective of this study was to determine consumer acceptance of a soy-based high-protein breakfast cereal developed to be utilized for weight loss and control. Four formulations with soy flour content of 41%, 47%, 54%, and 60% (w/w) were processed by extrusion. The formulations met the Food and Drug Administration (FDA) guidelines to claim the role of soy protein in reducing the risk of cardiovascular diseases and guidelines for high-protein and high-fiber foods. The effects of soy flour level, addition of cinnamon flavor, and evaluation with or without milk on acceptance were investigated. Overall acceptance of 3 of 8 cereal products was also compared to the acceptance of 5 commercial products in the "healthy" cereal category. Addition of up to 54% (w/w) soy flour resulted in comparable acceptance ratings to products with lower soy flour content. Addition of milk improved aroma and texture acceptance scores and addition of cinnamon flavor improved overall, aroma, and taste acceptance scores. Acceptance of the developed cereal products was not as high as the commercial products; however, it significantly increased when nutritional and cost information was presented. The results of this study demonstrated that with modification of the formulations, an acceptable high-protein soy-based cereal can be developed to increase protein consumption during breakfast meals, which can consequently aid in weight loss and control.

  1. Incorporating Experience Curves in Appliance Standards Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery

    2011-10-31

    The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners,more » clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.« less

  2. Parametric study of guided waves dispersion curves for composite plates

    NASA Astrophysics Data System (ADS)

    Predoi, Mihai Valentin; Petre, Cristian Cǎtǎlin; Kettani, Mounsif Ech Cherif El; Leduc, Damien

    2018-02-01

    Nondestructive testing of composite panels benefit from the relatively long range propagation of guided waves in sandwich structures. The guided waves are sensitive to delamination, air bubbles inclusions and cracks and can thus bring information about hidden defects in the composite panel. The preliminary data in all such inspections is represented by the dispersion curves, representing the dependency of the phase/group velocity on the frequency for the propagating modes. In fact, all modes are more or less attenuated, so it is even more important to compute the dispersion curves, which provide also the modal attenuation as function of frequency. Another important aspect is the sensitivity of the dispersion curves on each of the elastic constant of the composite, which are orthotropic in most cases. All these aspects are investigated in the present work, based on our specially developed finite element numerical model implemented in Comsol, which has several advantages over existing methods. The dispersion curves and modal displacements are computed for an example of composite plate. Comparison with literature data validates the accuracy of our results.

  3. Percentile curves for skinfold thickness for Canadian children and youth.

    PubMed

    Kuhle, Stefan; Ashley-Martin, Jillian; Maguire, Bryan; Hamilton, David C

    2016-01-01

    Background. Skinfold thickness (SFT) measurements are a reliable and feasible method for assessing body fat in children but their use and interpretation is hindered by the scarcity of reference values in representative populations of children. The objective of the present study was to develop age- and sex-specific percentile curves for five SFT measures (biceps, triceps, subscapular, suprailiac, medial calf) in a representative population of Canadian children and youth. Methods. We analyzed data from 3,938 children and adolescents between 6 and 19 years of age who participated in the Canadian Health Measures Survey cycles 1 (2007/2009) and 2 (2009/2011). Standardized procedures were used to measure SFT. Age- and sex-specific centiles for SFT were calculated using the GAMLSS method. Results. Percentile curves were materially different in absolute value and shape for boys and girls. Percentile girls in girls steadily increased with age whereas percentile curves in boys were characterized by a pubertal centered peak. Conclusions. The current study has presented for the first time percentile curves for five SFT measures in a representative sample of Canadian children and youth.

  4. Self-Interacting Dark Matter Can Explain Diverse Galactic Rotation Curves

    NASA Astrophysics Data System (ADS)

    Kamada, Ayuki; Kaplinghat, Manoj; Pace, Andrew B.; Yu, Hai-Bo

    2017-09-01

    The rotation curves of spiral galaxies exhibit a diversity that has been difficult to understand in the cold dark matter (CDM) paradigm. We show that the self-interacting dark matter (SIDM) model provides excellent fits to the rotation curves of a sample of galaxies with asymptotic velocities in the 25 - 300 km /s range that exemplify the full range of diversity. We assume only the halo concentration-mass relation predicted by the CDM model and a fixed value of the self-interaction cross section. In dark-matter-dominated galaxies, thermalization due to self-interactions creates large cores and reduces dark matter densities. In contrast, thermalization leads to denser and smaller cores in more luminous galaxies and naturally explains the flatness of rotation curves of the highly luminous galaxies at small radii. Our results demonstrate that the impact of the baryons on the SIDM halo profile and the scatter from the assembly history of halos as encoded in the concentration-mass relation can explain the diverse rotation curves of spiral galaxies.

  5. Self-Interacting Dark Matter Can Explain Diverse Galactic Rotation Curves.

    PubMed

    Kamada, Ayuki; Kaplinghat, Manoj; Pace, Andrew B; Yu, Hai-Bo

    2017-09-15

    The rotation curves of spiral galaxies exhibit a diversity that has been difficult to understand in the cold dark matter (CDM) paradigm. We show that the self-interacting dark matter (SIDM) model provides excellent fits to the rotation curves of a sample of galaxies with asymptotic velocities in the 25-300  km/s range that exemplify the full range of diversity. We assume only the halo concentration-mass relation predicted by the CDM model and a fixed value of the self-interaction cross section. In dark-matter-dominated galaxies, thermalization due to self-interactions creates large cores and reduces dark matter densities. In contrast, thermalization leads to denser and smaller cores in more luminous galaxies and naturally explains the flatness of rotation curves of the highly luminous galaxies at small radii. Our results demonstrate that the impact of the baryons on the SIDM halo profile and the scatter from the assembly history of halos as encoded in the concentration-mass relation can explain the diverse rotation curves of spiral galaxies.

  6. Differences in HIV vaccine acceptability between genders

    PubMed Central

    Kakinami, Lisa; Newman, Peter A.; Lee, Sung-Jae; Duan, Naihua

    2010-01-01

    The development of safe and efficacious preventive HIV vaccines offers the best long-term hope of controlling the AIDS pandemic. Nevertheless, suboptimal uptake of safe and efficacious vaccines that already exist suggest that HIV vaccine acceptability cannot be assumed, particularly among communities most vulnerable to HIV. The present study aimed to identify barriers and motivators to future HIV vaccine acceptability among low socioeconomic, ethnically diverse men and women in Los Angeles County. Participants completed a cross-sectional survey assessing their attitudes and beliefs regarding future HIV vaccines. Hypothetical HIV vaccine scenarios were administered to determine HIV vaccine acceptability. Two-sided t-tests were performed, stratified by gender, to examine the association between vaccine acceptability and potential barriers and motivators. Barriers to HIV vaccine acceptability differed between men and women. For women, barriers to HIV vaccine acceptability were related to their intimate relationships (p <0.05), negative experiences with health care providers (p <0.05) and anticipated difficulties procuring insurance (p <0.01). Men were concerned that the vaccine would weaken the immune system (p <0.005) or would affect their HIV test results (p <0.05). Motivators for women included the ability to conceive a child without worrying about contracting HIV (p <0.10) and support from their spouse/significant other for being vaccinated (p <0.10). Motivators for men included feeling safer with sex partners (p <0.05) and social influence from friends to get vaccinated (p <0.005). Family support for HIV immunization was a motivator for both men and women (p <0.10). Gender-specific interventions may increase vaccine acceptability among men and women at elevated risk for HIV infection. Among women, interventions need to focus on addressing barriers due to gendered power dynamics in relationships and discrimination in health care. Among men, education that

  7. Technology acceptance perception for promotion of sustainable consumption.

    PubMed

    Biswas, Aindrila; Roy, Mousumi

    2018-03-01

    Economic growth in the past decades has resulted in change in consumption pattern and emergence of tech-savvy generation with unprecedented increase in the usage of social network technology. In this paper, the technology acceptance value gap adapted from the technology acceptance model has been applied as a tool supporting social network technology usage and subsequent promotion of sustainable consumption. The data generated through the use of structured questionnaires have been analyzed using structural equation modeling. The validity of the model and path estimates signifies the robustness of Technology Acceptance value gap in adjudicating the efficiency of social network technology usage in augmentation of sustainable consumption and awareness. The results indicate that subjective norm gap, ease-of-operation gap, and quality of green information gap have the most adversarial impact on social network technology usage. Eventually social networking technology usage has been identified as a significant antecedent of sustainable consumption.

  8. Observable Zitterbewegung in curved spacetimes

    NASA Astrophysics Data System (ADS)

    Kobakhidze, Archil; Manning, Adrian; Tureanu, Anca

    2016-06-01

    Zitterbewegung, as it was originally described by Schrödinger, is an unphysical, non-observable effect. We verify whether the effect can be observed in non-inertial reference frames/curved spacetimes, where the ambiguity in defining particle states results in a mixing of positive and negative frequency modes. We explicitly demonstrate that such a mixing is in fact necessary to obtain the correct classical value for a particle's velocity in a uniformly accelerated reference frame, whereas in cosmological spacetime a particle does indeed exhibit Zitterbewegung.

  9. European public acceptance of euthanasia: socio-demographic and cultural factors associated with the acceptance of euthanasia in 33 European countries.

    PubMed

    Cohen, Joachim; Marcoux, Isabelle; Bilsen, Johan; Deboosere, Patrick; van der Wal, Gerrit; Deliens, Luc

    2006-08-01

    In many European countries, the last decade has been marked by an increasing debate about the acceptability and regulation of euthanasia and other end-of-life decisions in medical practice. Growing public sensibility to a 'right to die' for terminally ill patients has been one of the main constituents of these debates. Within this context, we sought to describe and compare acceptance of euthanasia among the general public in 33 European countries. We used the European Values Study data of 1999-2000 with a total of 41125 respondents (63% response rate) in 33 European countries. The main outcome measure concerned the acceptance of euthanasia (defined as 'terminating the life of the incurably sick', rated on a scale from 1 to 10). Results showed that the acceptance of euthanasia tended to be high in some countries (e.g. the Netherlands, Denmark, France, Sweden), while a markedly low acceptance was found in others (e.g. Romania, Malta and Turkey). A multivariate ordinal regression showed that weaker religious belief was the most important factor associated with a higher acceptance; however, there were also socio-demographic differences: younger cohorts, people from non-manual social classes, and people with a higher educational level tended to have a higher acceptance of euthanasia. While religious belief, socio-demographic factors, and also moral values (i.e. the belief in the right to self-determination) could largely explain the differences between countries, our findings suggest that perceptions regarding euthanasia are probably also influenced by national traditions and history (e.g. Germany). Thus, we demonstrated clear cross-national differences with regard to the acceptance of euthanasia, which can serve as an important basis for further debate and research in the specific countries.

  10. Probing exoplanet clouds with optical phase curves.

    PubMed

    Muñoz, Antonio García; Isaak, Kate G

    2015-11-03

    Kepler-7b is to date the only exoplanet for which clouds have been inferred from the optical phase curve--from visible-wavelength whole-disk brightness measurements as a function of orbital phase. Added to this, the fact that the phase curve appears dominated by reflected starlight makes this close-in giant planet a unique study case. Here we investigate the information on coverage and optical properties of the planet clouds contained in the measured phase curve. We generate cloud maps of Kepler-7b and use a multiple-scattering approach to create synthetic phase curves, thus connecting postulated clouds with measurements. We show that optical phase curves can help constrain the composition and size of the cloud particles. Indeed, model fitting for Kepler-7b requires poorly absorbing particles that scatter with low-to-moderate anisotropic efficiency, conclusions consistent with condensates of silicates, perovskite, and silica of submicron radii. We also show that we are limited in our ability to pin down the extent and location of the clouds. These considerations are relevant to the interpretation of optical phase curves with general circulation models. Finally, we estimate that the spherical albedo of Kepler-7b over the Kepler passband is in the range 0.4-0.5.

  11. IGMtransmission: Transmission curve computation

    NASA Astrophysics Data System (ADS)

    Harrison, Christopher M.; Meiksin, Avery; Stock, David

    2015-04-01

    IGMtransmission is a Java graphical user interface that implements Monte Carlo simulations to compute the corrections to colors of high-redshift galaxies due to intergalactic attenuation based on current models of the Intergalactic Medium. The effects of absorption due to neutral hydrogen are considered, with particular attention to the stochastic effects of Lyman Limit Systems. Attenuation curves are produced, as well as colors for a wide range of filter responses and model galaxy spectra. Photometric filters are included for the Hubble Space Telescope, the Keck telescope, the Mt. Palomar 200-inch, the SUBARU telescope and UKIRT; alternative filter response curves and spectra may be readily uploaded.

  12. Learning curves for urological procedures: a systematic review.

    PubMed

    Abboudi, Hamid; Khan, Mohammed Shamim; Guru, Khurshid A; Froghi, Saied; de Win, Gunter; Van Poppel, Hendrik; Dasgupta, Prokar; Ahmed, Kamran

    2014-10-01

    To determine the number of cases a urological surgeon must complete to achieve proficiency for various urological procedures. The MEDLINE, EMBASE and PsycINFO databases were systematically searched for studies published up to December 2011. Studies pertaining to learning curves of urological procedures were included. Two reviewers independently identified potentially relevant articles. Procedure name, statistical analysis, procedure setting, number of participants, outcomes and learning curves were analysed. Forty-four studies described the learning curve for different urological procedures. The learning curve for open radical prostatectomy ranged from 250 to 1000 cases and for laparoscopic radical prostatectomy from 200 to 750 cases. The learning curve for robot-assisted laparoscopic prostatectomy (RALP) has been reported to be 40 procedures as a minimum number. Robot-assisted radical cystectomy has a documented learning curve of 16-30 cases, depending on which outcome variable is measured. Irrespective of previous laparoscopic experience, there is a significant reduction in operating time (P = 0.008), estimated blood loss (P = 0.008) and complication rates (P = 0.042) after 100 RALPs. The available literature can act as a guide to the learning curves of trainee urologists. Although the learning curve may vary among individual surgeons, a consensus should exist for the minimum number of cases to achieve proficiency. The complexities associated with defining procedural competence are vast. The majority of learning curve trials have focused on the latest surgical techniques and there is a paucity of data pertaining to basic urological procedures. © 2013 The Authors. BJU International © 2013 BJU International.

  13. Curved-line search algorithm for ab initio atomic structure relaxation

    NASA Astrophysics Data System (ADS)

    Chen, Zhanghui; Li, Jingbo; Li, Shushen; Wang, Lin-Wang

    2017-09-01

    Ab initio atomic relaxations often take large numbers of steps and long times to converge, especially when the initial atomic configurations are far from the local minimum or there are curved and narrow valleys in the multidimensional potentials. An atomic relaxation method based on on-the-flight force learning and a corresponding curved-line search algorithm is presented to accelerate this process. Results demonstrate the superior performance of this method for metal and magnetic clusters when compared with the conventional conjugate-gradient method.

  14. Empirical expression for DC magnetization curve of immobilized magnetic nanoparticles for use in biomedical applications

    NASA Astrophysics Data System (ADS)

    Elrefai, Ahmed L.; Sasayama, Teruyoshi; Yoshida, Takashi; Enpuku, Keiji

    2018-05-01

    We studied the magnetization (M-H) curve of immobilized magnetic nanoparticles (MNPs) used for biomedical applications. First, we performed numerical simulation on the DC M-H curve over a wide range of MNPs parameters. Based on the simulation results, we obtained an empirical expression for DC M-H curve. The empirical expression was compared with the measured M-H curves of various MNP samples, and quantitative agreements were obtained between them. We can also estimate the basic parameters of MNP from the comparison. Therefore, the empirical expression is useful for analyzing the M-H curve of immobilized MNPs for specific biomedical applications.

  15. A study of Lusitano mare lactation curve with Wood's model.

    PubMed

    Santos, A S; Silvestre, A M

    2008-02-01

    Milk yield and composition data from 7 nursing Lusitano mares (450 to 580 kg of body weight and 2 to 9 parities) were used in this study (5 measurements per mare for milk yield and 8 measurements for composition). Wood's lactation model was used to describe milk fat, protein, and lactose lactation curves. Mean values for the concentration of major milk components across the lactation period (180 d) were 5.9 g/kg of fat, 18.4 g/kg of protein, and 60.8 g/kg of lactose. Milk fat and protein (g/kg) decreased and lactose (g/kg) increased during the 180 d of lactation. Curves for milk protein and lactose yields (g) were similar in shape to the milk yield curve; protein yield peaked at 307 g on d 10 and lactose peaked at 816 g on d 45. The fat (g) curve was different in shape compared with milk, protein, and lactose yields. Total production of the major milk constituents throughout the 180 d of lactation was estimated to be 12.0, 36.1, and 124 kg for fat, protein, and lactose, respectively. The algebraic model fitted by a nonlinear regression procedure to the data resulted in reasonable prediction curves for milk yield (R(a)(2) of 0.89) and the major constituents (R(a)(2) ranged from 0.89 to 0.95). The lactation curves of major milk constituents in Lusitano mares were similar, both in shape and values, to those found in other horse breeds. The established curves facilitate the estimation of milk yield and variation of milk constituents at different stages of lactation for both nursing and dairy mares, providing important information relative to weaning time and foal supplementation.

  16. Influence of pavement condition on horizontal curve safety.

    PubMed

    Buddhavarapu, Prasad; Banerjee, Ambarish; Prozzi, Jorge A

    2013-03-01

    Crash statistics suggest that horizontal curves are the most vulnerable sites for crash occurrence. These crashes are often severe and many involve at least some level of injury due to the nature of the collisions. Ensuring the desired pavement surface condition is one potentially effective strategy to reduce the occurrence of severe accidents on horizontal curves. This study sought to develop crash injury severity models by integrating crash and pavement surface condition databases. It focuses on developing a causal relationship between pavement condition indices and severity level of crashes occurring on two-lane horizontal curves in Texas. In addition, it examines the suitability of the existing Skid Index for safety maintenance of two-lane curves. Significant correlation is evident between pavement condition and crash injury severity on two-lane undivided horizontal curves in Texas. Probability of a crash becoming fatal is appreciably sensitive to certain pavement indices. Data suggested that road facilities providing a smoother and more comfortable ride are vulnerable to severe crashes on horizontal curves. In addition, the study found that longitudinal skid measurement barely correlates with injury severity of crashes occurring on curved portions. The study recommends exploring the option of incorporating lateral friction measurement into Pavement Management System (PMS) databases specifically at curved road segments. Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. A new interferential multispectral image compression algorithm based on adaptive classification and curve-fitting

    NASA Astrophysics Data System (ADS)

    Wang, Ke-Yan; Li, Yun-Song; Liu, Kai; Wu, Cheng-Ke

    2008-08-01

    A novel compression algorithm for interferential multispectral images based on adaptive classification and curve-fitting is proposed. The image is first partitioned adaptively into major-interference region and minor-interference region. Different approximating functions are then constructed for two kinds of regions respectively. For the major interference region, some typical interferential curves are selected to predict other curves. These typical curves are then processed by curve-fitting method. For the minor interference region, the data of each interferential curve are independently approximated. Finally the approximating errors of two regions are entropy coded. The experimental results show that, compared with JPEG2000, the proposed algorithm not only decreases the average output bit-rate by about 0.2 bit/pixel for lossless compression, but also improves the reconstructed images and reduces the spectral distortion greatly, especially at high bit-rate for lossy compression.

  18. UGV acceptance testing

    NASA Astrophysics Data System (ADS)

    Kramer, Jeffrey A.; Murphy, Robin R.

    2006-05-01

    With over 100 models of unmanned vehicles now available for military and civilian safety, security or rescue applications, it is important to for agencies to establish acceptance testing. However, there appears to be no general guidelines for what constitutes a reasonable acceptance test. This paper describes i) a preliminary method for acceptance testing by a customer of the mechanical and electrical components of an unmanned ground vehicle system, ii) how it has been applied to a man-packable micro-robot, and iii) discusses the value of testing both to ensure that the customer has a workable system and to improve design. The test method automated the operation of the robot to repeatedly exercise all aspects and combinations of components on the robot for 6 hours. The acceptance testing process uncovered many failures consistent with those shown to occur in the field, showing that testing by the user does predict failures. The process also demonstrated that the testing by the manufacturer can provide important design data that can be used to identify, diagnose, and prevent long-term problems. Also, the structured testing environment showed that sensor systems can be used to predict errors and changes in performance, as well as uncovering unmodeled behavior in subsystems.

  19. 12 CFR 7.1007 - Acceptances.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 1 2011-01-01 2011-01-01 false Acceptances. 7.1007 Section 7.1007 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY BANK ACTIVITIES AND OPERATIONS Bank Powers § 7.1007 Acceptances. A national bank is not limited in the character of acceptances it may make in...

  20. Blues fans and suicide acceptability.

    PubMed

    Stack, S

    2000-01-01

    Research has neglected the possible impact of the blues music subculture on suicide acceptability (SA). The sad themes in the blues may attract suicidal persons and reinforce their suicidal moods and attitudes. The present study performs the first test of the thesis that associates SA with being a blues fan. It uses data on a national sample of 961 adults drawn from the General Social Survey of 1993. The results of a multivariate logistic regression analysis found that blues fans were no more accepting of suicide than nonfans. However, blues fanship was found to have substantial indirect effects on SA through its influence on such factors as lowered religiosity levels, the most important predictor of SA. Race-specific analyses found more support for the model for whites than for African Americans.

  1. Complexity of Curved Glass Structures

    NASA Astrophysics Data System (ADS)

    Kosić, T.; Svetel, I.; Cekić, Z.

    2017-11-01

    Despite the increasing number of research on the architectural structures of curvilinear forms and technological and practical improvement of the glass production observed over recent years, there is still a lack of comprehensive codes and standards, recommendations and experience data linked to real-life curved glass structures applications regarding design, manufacture, use, performance and economy. However, more and more complex buildings and structures with the large areas of glass envelope geometrically complex shape are built every year. The aim of the presented research is to collect data on the existing design philosophy on curved glass structure cases. The investigation includes a survey about how architects and engineers deal with different design aspects of curved glass structures with a special focus on the design and construction process, glass types and structural and fixing systems. The current paper gives a brief overview of the survey findings.

  2. Limitations to maximum running speed on flat curves.

    PubMed

    Chang, Young-Hui; Kram, Rodger

    2007-03-01

    Why is maximal running speed reduced on curved paths? The leading explanation proposes that an increase in lateral ground reaction force necessitates a decrease in peak vertical ground reaction force, assuming that maximum leg extension force is the limiting factor. Yet, no studies have directly measured these forces or tested this critical assumption. We measured maximum sprint velocities and ground reaction forces for five male humans sprinting along a straight track and compared them to sprints along circular tracks of 1, 2, 3, 4 and 6 m radii. Circular track sprint trials were performed either with or without a tether that applied centripetal force to the center of mass. Sprinters generated significantly smaller peak resultant ground reaction forces during normal curve sprinting compared to straight sprinting. This provides direct evidence against the idea that maximum leg extension force is always achieved and is the limiting factor. Use of the tether increased sprint speed, but not to expected values. During curve sprinting, the inside leg consistently generated smaller peak forces compared to the outside leg. Several competing biomechanical constraints placed on the stance leg during curve sprinting likely make the inside leg particularly ineffective at generating the ground reaction forces necessary to attain maximum velocities comparable to straight path sprinting. The ability of quadrupeds to redistribute function across multiple stance legs and decouple these multiple constraints may provide a distinct advantage for turning performance.

  3. 49 CFR 213.59 - Elevation of curved track; runoff.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Elevation of curved track; runoff. 213.59 Section... track; runoff. (a) If a curve is elevated, the full elevation shall be provided throughout the curve, unless physical conditions do not permit. If elevation runoff occurs in a curve, the actual minimum...

  4. Reconstruction of quadratic curves in 3D using two or more perspective views: simulation studies

    NASA Astrophysics Data System (ADS)

    Kumar, Sanjeev; Sukavanam, N.; Balasubramanian, R.

    2006-01-01

    The shapes of many natural and man-made objects have planar and curvilinear surfaces. The images of such curves usually do not have sufficient distinctive features to apply conventional feature-based reconstruction algorithms. In this paper, we describe a method of reconstruction of a quadratic curve in 3-D space as an intersection of two cones containing the respective projected curve images. The correspondence between this pair of projections of the curve is assumed to be established in this work. Using least-square curve fitting, the parameters of a curve in 2-D space are found. From this we are reconstructing the 3-D quadratic curve. Relevant mathematical formulations and analytical solutions for obtaining the equation of reconstructed curve are given. The result of the described reconstruction methodology are studied by simulation studies. This reconstruction methodology is applicable to LBW decision in cricket, path of the missile, Robotic Vision, path lanning etc.

  5. Decision curve analysis revisited: overall net benefit, relationships to ROC curve analysis, and application to case-control studies.

    PubMed

    Rousson, Valentin; Zumbrunn, Thomas

    2011-06-22

    Decision curve analysis has been introduced as a method to evaluate prediction models in terms of their clinical consequences if used for a binary classification of subjects into a group who should and into a group who should not be treated. The key concept for this type of evaluation is the "net benefit", a concept borrowed from utility theory. We recall the foundations of decision curve analysis and discuss some new aspects. First, we stress the formal distinction between the net benefit for the treated and for the untreated and define the concept of the "overall net benefit". Next, we revisit the important distinction between the concept of accuracy, as typically assessed using the Youden index and a receiver operating characteristic (ROC) analysis, and the concept of utility of a prediction model, as assessed using decision curve analysis. Finally, we provide an explicit implementation of decision curve analysis to be applied in the context of case-control studies. We show that the overall net benefit, which combines the net benefit for the treated and the untreated, is a natural alternative to the benefit achieved by a model, being invariant with respect to the coding of the outcome, and conveying a more comprehensive picture of the situation. Further, within the framework of decision curve analysis, we illustrate the important difference between the accuracy and the utility of a model, demonstrating how poor an accurate model may be in terms of its net benefit. Eventually, we expose that the application of decision curve analysis to case-control studies, where an accurate estimate of the true prevalence of a disease cannot be obtained from the data, is achieved with a few modifications to the original calculation procedure. We present several interrelated extensions to decision curve analysis that will both facilitate its interpretation and broaden its potential area of application.

  6. Cultural acceptance of robotic telestroke medicine among patients and healthcare providers in Saudi Arabia. Results of a pilot study.

    PubMed

    Al-Khathaami, Ali M; Alshahrani, Saeed M; Kojan, Suleiman M; Al-Jumah, Mohammed A; Alamry, Ahmed A; El-Metwally, Ashraf A

    2015-01-01

    To determine the degree of satisfaction and acceptance of stroke patients, their relatives, and healthcare providers toward using telestroke technology in Saudi Arabia. A cross-sectional study was conducted between October and December 2012 at King Abdulaziz Medical City, Ministry of National Guard Affairs, Riyadh, Saudi Arabia. The Remote Presence Robot (RPR), the RP-7i (FDA- cleared) provided by InTouch Health was used in the study. Patients and their relatives were informed that the physician would appear through a screen on top of a robotic device, as part of their clinical care. Stroke patients admitted through the emergency department, and their relatives, as well as healthcare providers completed a self-administered satisfaction questionnaire following the telestroke consultation sessions. Fifty participants completed the questionnaire. Most subjects agreed that the remote consultant interview was useful and that the audiovisual component of the intervention was of high quality; 98% agreed that they did not feel shy or embarrassed during the remote interview, were able to understand the instruction of the consultant, and recommended its use in stroke management. Furthermore, 92% agreed or strongly agreed that the use of this technology can efficiently replace the physical presence of a neurologist. Results suggest that the use of telestroke medicine is culturally acceptable among stroke patients and their families in Saudi Arabia and favorably received by healthcare providers.

  7. Feasibility and acceptability of shared decision-making to promote alcohol behavior change among women Veterans: Results from focus groups.

    PubMed

    Abraham, Traci H; Wright, Patricia; White, Penny; Booth, Brenda M; Cucciare, Michael A

    2017-01-01

    Although rates of unhealthy drinking are high among women Veterans with mental health comorbidities, most women Veterans with mental comorbidities who present to primary care with unhealthy drinking do not receive alcohol-related care. Barriers to alcohol-related treatment could be reduced through patient-centered approaches to care, such as shared decision-making. We assessed the feasibility and acceptability of a telephone-delivered shared decision-making intervention for promoting alcohol behavior change in women Veterans with unhealthy drinking and co-morbid depression and/or probable post-traumatic stress disorder. We used 3, 2-hour focus group discussions with 19 women Veterans to identify barriers and solicit recommendations for using the intervention with women Veterans who present to primary care with unhealthy drinking and mental health comorbidities. Transcripts from the focus groups were qualitatively analyzed using template analysis. Although participants perceived that the intervention was feasible and acceptable for the targeted patient population, they identified the treatment delivery modality, length of telephone sessions, and some of the option grid content as potential barriers. Facilitators included strategies for enhancing the telephone-delivered shared decision-making sessions and diversifying the treatment options contained in the option grids. Focus group feedback resulted in preliminary adaptations to the intervention that are mindful of women Veterans' individual preferences for care and realistic in the everyday context of their busy lives.

  8. A curved piezo-structure model: implications on active structural acoustic control.

    PubMed

    Henry, J K; Clark, R L

    1999-09-01

    Current research in Active Structural Acoustic Control (ASAC) relies heavily upon accurately capturing the application physics associated with the structure being controlled. The application of ASAC to aircraft interior noise requires a greater understanding of the dynamics of the curved panels which compose the skin of an aircraft fuselage. This paper presents a model of a simply supported curved panel with attached piezoelectric transducers. The model is validated by comparison to previous work. Further, experimental results for a simply supported curved panel test structure are presented in support of the model. The curvature is shown to affect substantially the dynamics of the panel, the integration of transducers, and the bandwidth required for structural acoustic control.

  9. Habitat suitability index curves for paddlefish, developed by the delphi technique

    USGS Publications Warehouse

    Crance, John H.

    1987-01-01

    A Delphi exercise conducted with a panel of 11 experts on paddlefish (Polyodon spathula) and an evaluator resulted in 14 riverine habitat suitability index curves associating various life stages or activities of paddlefish with four variables: velocity, depth, substrate type, and temperature. The panel reached a consensus on six of the curves and eight to 10 panelists agreed on the others. Several panelists reported that they found the Delphi exercise to be a good learning experience, and they believed the technique is an appropriate interim method for developing suitability index curves when available data are inadequate for more conventional statistical analyses. Documentation of good paddlefish spawning habitat was the data need most commonly identified by the panelists.

  10. Forgetting Curves: Implications for Connectionist Models

    ERIC Educational Resources Information Center

    Sikstrom, Sverker

    2002-01-01

    Forgetting in long-term memory, as measured in a recall or a recognition test, is faster for items encoded more recently than for items encoded earlier. Data on forgetting curves fit a power function well. In contrast, many connectionist models predict either exponential decay or completely flat forgetting curves. This paper suggests a…

  11. Linking fluorescence induction curve and biomass in herbicide screening.

    PubMed

    Christensen, Martin G; Teicher, Harald B; Streibig, Jens C

    2003-12-01

    A suite of dose-response bioassays with white mustard (Sinapis alba L) and sugar beet (Beta vulgaris L) in the greenhouse and with three herbicides was used to analyse how the fluorescence induction curves (Kautsky curves) were affected by the herbicides. Bentazone, a photosystem II (PSII) inhibitor, completely blocked the normal fluorescence decay after the P-step. In contrast, fluorescence decay was still obvious for flurochloridone, a PDS inhibitor, and glyphosate, an EPSP inhibitor, which indicated that PSII inhibition was incomplete. From the numerous parameters that can be derived from OJIP-steps of the Kautsky curve the relative changes at the J-step [Fvj = (Fm - Fj)/Fm] was selected to be a common response parameter for the herbicides and yielded consistent dose-response relationships. Four hours after treatment, the response Fvj on the doses of bentazone and flurochloridone could be measured. For glyphosate, the changes of the Kautsky curve could similarly be detected 4 h after treatment in sugar beet, but only after 24 hs in S alba. The best prediction of biomass in relation to Fvj was found for bentazone. The experiments were conducted between May and August 2002 and showed that the ambient temperature and solar radiation in the greenhouse could affect dose-response relationships. If the Kautsky curve parameters should be used to predict the outcome of herbicide screening experiments in the greenhouse, where ambient radiation and temperature can only partly be controlled, it is imperative that the chosen fluorescence parameters can be used to predict accurately the resulting biomass used in classical bioassays.

  12. Spatial Reasoning Training Through Light Curves Of Model Asteroids

    NASA Astrophysics Data System (ADS)

    Ziffer, Julie; Nakroshis, Paul A.; Rudnick, Benjamin T.; Brautigam, Maxwell J.; Nelson, Tyler W.

    2015-11-01

    Recent research has demonstrated that spatial reasoning skills, long known to be crucial to math and science success, are teachable. Even short stints of training can improve spatial reasoning skills among students who lack them (Sorby et al., 2006). Teaching spatial reasoning is particularly valuable to women and minorities who, through societal pressure, often doubt their spatial reasoning skill (Hill et al., 2010). We have designed a hands on asteroid rotation lab that provides practice in spatial reasoning tasks while building the student’s understanding of photometry. For our tool, we mount a model asteroid, with any shape of our choosing, on a slowly rotating motor shaft, whose speed is controlled by the experimenter. To mimic an asteroid light curve, we place the model asteroid in a dark box, shine a movable light source upon our asteroid, and record the light reflected onto a moveable camera. Students may then observe changes in the light curve that result from varying a) the speed of rotation, b) the model asteroid’s orientation with respect to the motor axis, c) the model asteroid’s shape or albedo, and d) the phase angle. After practicing with our tool, students are asked to pair new objects to their corresponding light curves. To correctly pair objects to their light curves, students must imagine how light scattering off of a three dimensional rotating object is imaged on a ccd sensor plane, and then reduced to a series of points on a light curve plot. Through the use of our model asteroid, the student develops confidence in spatial reasoning skills.

  13. Relative Cost-Effectiveness of Treatments for Adolescent Depression: 36-Week Results from the TADS Randomized Trial

    ERIC Educational Resources Information Center

    Domino, Marisa Elena; Foster, E. Michael; Vitiello, Benedetto; Kratochvil, Christopher J.; Burns, Barbara J.; Silva, Susan G.; Reinecke, Mark A.; March, John S.

    2009-01-01

    Randomized controlled trials that involve 327 participants aged 12 to 18 who were diagnosed with major depression were given either fluoxetine alone, cognitive-behavioral therapy, or a combination of both. Cost-effectiveness acceptability curves suggest that combination treatment is highly likely to be the most cost-effective treatment than…

  14. Understanding and enhancing user acceptance of computer technology

    NASA Technical Reports Server (NTRS)

    Rouse, William B.; Morris, Nancy M.

    1986-01-01

    Technology-driven efforts to implement computer technology often encounter problems due to lack of acceptance or begrudging acceptance of the personnel involved. It is argued that individuals' acceptance of automation, in terms of either computerization or computer aiding, is heavily influenced by their perceptions of the impact of the automation on their discretion in performing their jobs. It is suggested that desired levels of discretion reflect needs to feel in control and achieve self-satisfaction in task performance, as well as perceptions of inadequacies of computer technology. Discussion of these factors leads to a structured set of considerations for performing front-end analysis, deciding what to automate, and implementing the resulting changes.

  15. 21 CFR 820.86 - Acceptance status.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... QUALITY SYSTEM REGULATION Acceptance Activities § 820.86 Acceptance status. Each manufacturer shall... product which has passed the required acceptance activities is distributed, used, or installed. ...

  16. Ideal Standards, Acceptance, and Relationship Satisfaction: Latitudes of Differential Effects

    PubMed Central

    Buyukcan-Tetik, Asuman; Campbell, Lorne; Finkenauer, Catrin; Karremans, Johan C.; Kappen, Gesa

    2017-01-01

    We examined whether the relations of consistency between ideal standards and perceptions of a current romantic partner with partner acceptance and relationship satisfaction level off, or decelerate, above a threshold. We tested our hypothesis using a 3-year longitudinal data set collected from heterosexual newlywed couples. We used two indicators of consistency: pattern correspondence (within-person correlation between ideal standards and perceived partner ratings) and mean-level match (difference between ideal standards score and perceived partner score). Our results revealed that pattern correspondence had no relation with partner acceptance, but a positive linear/exponential association with relationship satisfaction. Mean-level match had a significant positive association with actor’s acceptance and relationship satisfaction up to the point where perceived partner score equaled ideal standards score. Partner effects did not show a consistent pattern. The results suggest that the consistency between ideal standards and perceived partner attributes has a non-linear association with acceptance and relationship satisfaction, although the results were more conclusive for mean-level match. PMID:29033876

  17. Anomalous behavior of curves of pseudo-elastic deformation of Ni-Fe-Ga-Co alloy crystals as a result of interphase stresses

    NASA Astrophysics Data System (ADS)

    Malygin, G. A.; Nikolaev, V. I.; Averkin, A. I.; Zograf, A. P.

    2016-12-01

    The compression diagram of Ni49Fe18Ga27Co6 alloy crystals in the [011] direction was studied until full shape memory strain at various temperatures in the range of 259-340 K. It is found that all load curves are anomalously shaped and contain portions of sharp and gradual decreases in deformation stresses. Simulation of pseudo-elastic stress-strain curves within the theory of diffuse martensitic transitions, describing not only equilibrium of phases, but also the kinetics of the transition between them, shows that elastic interphase stresses during martensitic reactions Ll 2 → 14 M and 14 M → Ll 0 characteristic of this alloy can be responsible for the extraordinary shape of compression diagrams.

  18. Resistance Curves in the Tensile and Compressive Longitudinal Failure of Composites

    NASA Technical Reports Server (NTRS)

    Camanho, Pedro P.; Catalanotti, Giuseppe; Davila, Carlos G.; Lopes, Claudio S.; Bessa, Miguel A.; Xavier, Jose C.

    2010-01-01

    This paper presents a new methodology to measure the crack resistance curves associated with fiber-dominated failure modes in polymer-matrix composites. These crack resistance curves not only characterize the fracture toughness of the material, but are also the basis for the identification of the parameters of the softening laws used in the analytical and numerical simulation of fracture in composite materials. The method proposed is based on the identification of the crack tip location by the use of Digital Image Correlation and the calculation of the J-integral directly from the test data using a simple expression derived for cross-ply composite laminates. It is shown that the results obtained using the proposed methodology yield crack resistance curves similar to those obtained using FEM-based methods in compact tension carbon-epoxy specimens. However, it is also shown that the Digital Image Correlation based technique can be used to extract crack resistance curves in compact compression tests for which FEM-based techniques are inadequate.

  19. Effects of curved-walking training on curved-walking performance and freezing of gait in individuals with Parkinson's disease: A randomized controlled trial.

    PubMed

    Cheng, Fang-Yu; Yang, Yea-Ru; Wu, Yih-Ru; Cheng, Shih-Jung; Wang, Ray-Yau

    2017-10-01

    The purpose of this study was to investigate the effects of curved-walking training (CWT) on curved-walking performance and freezing of gait (FOG) in people with Parkinson's disease (PD). Twenty-four PD subjects were recruited and randomly assigned to the CWT group or control exercise (CE) group and received 12 sessions of either CWT with a turning-based treadmill or general exercise training for 30 min followed by 10 min of over-ground walking in each session for 4-6 weeks. The primary outcomes included curved-walking performance and FOG. All measurements were assessed at baseline, after training, and at 1-month follow-up. Our results showed significant improvements in curved-walking performance (speed, p = 0.007; cadence, p = 0.003; step length, p < 0.001) and FOG, measured by a FOG questionnaire (p = 0.004). The secondary outcomes including straight-walking performance (speed, cadence and step length, p < 0.001), timed up and go test (p = 0.014), functional gait assessment (p < 0.001), Unified Parkinson's disease Rating Scale III (p = 0.001), and quality of life (p < 0.001) were also improved in the experimental group. We further noted that the improvements were maintained for at least one month after training (p < 0.05). A 12-session CWT program can improve curved-walking ability, FOG, and other measures of functional walking performance in individuals with PD. Most of the improvements were sustained for at least one month after training. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Electromagnetic fields in curved spacetimes

    NASA Astrophysics Data System (ADS)

    Tsagas, Christos G.

    2005-01-01

    We consider the evolution of electromagnetic fields in curved spacetimes and calculate the exact wave equations for the associated electric and magnetic components. Our analysis is fully covariant, applies to a general spacetime and isolates all the sources that affect the propagation of these waves. Among others, we explicitly show how the different components of the gravitational field act as driving sources of electromagnetic disturbances. When applied to perturbed Friedmann Robertson Walker cosmologies, our results argue for a superadiabatic-type amplification of large-scale cosmological magnetic fields in Friedmann models with open spatial curvature.

  1. Shock melting method to determine melting curve by molecular dynamics: Cu, Pd, and Al

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Zhong-Li, E-mail: zl.liu@163.com; Zhang, Xiu-Lu; Cai, Ling-Cang

    A melting simulation method, the shock melting (SM) method, is proposed and proved to be able to determine the melting curves of materials accurately and efficiently. The SM method, which is based on the multi-scale shock technique, determines melting curves by preheating and/or prepressurizing materials before shock. This strategy was extensively verified using both classical and ab initio molecular dynamics (MD). First, the SM method yielded the same satisfactory melting curve of Cu with only 360 atoms using classical MD, compared to the results from the Z-method and the two-phase coexistence method. Then, it also produced a satisfactory melting curvemore » of Pd with only 756 atoms. Finally, the SM method combined with ab initio MD cheaply achieved a good melting curve of Al with only 180 atoms, which agrees well with the experimental data and the calculated results from other methods. It turned out that the SM method is an alternative efficient method for calculating the melting curves of materials.« less

  2. THE SEXUAL DOUBLE STANDARD AND ADOLESCENT PEER ACCEPTANCE*

    PubMed Central

    Kreager, Derek A.; Staff, Jeremy

    2014-01-01

    The belief that women and men are held to different standards of sexual conduct is pervasive in contemporary American society. According to the sexual double standard, boys and men are rewarded and praised for heterosexual sexual contacts, whereas girls and women are derogated and stigmatized for similar behaviors. Although widely held by the general public, research findings on the sexual double standard remain equivocal, with qualitative studies and early attitudinal surveys generally finding evidence of the double standard and more recent experimental vignette designs often failing to find similar results. In this study, we extend prior research by directly measuring the social status of sexually permissive youth. We use data collected from the National Longitudinal Study of Adolescent Health to relate adolescents’ self-reported numbers of sexual partners to a network measure of peer acceptance. Results suggest that the association between lifetime sexual partnerships and peer status varies significantly by gender, such that greater numbers of sexual partners are positively correlated with boys’ peer acceptance, but negatively correlated with girls’ peer acceptance. Moreover, the relationship between boys’ sexual behaviors and peer acceptance is moderated by socioeconomic origins; sexually permissive boys from disadvantaged backgrounds are predicted to have more friendships than permissive boys from more advantaged backgrounds. Our results thus support the existence of an adolescent sexual double standard and suggest that sexual norms vary by both gender and socioeconomic origins. PMID:25484478

  3. Delamination Analysis Of Composite Curved Bars

    NASA Technical Reports Server (NTRS)

    Ko, William L.; Jackson, Raymond H.

    1990-01-01

    Classical anisotropic elasticity theory used to construct "multilayer" composite semicircular curved bar subjected to end forces and end moments. Radial location and intensity of open-mode delamination stress calculated and compared with results obtained from anisotropic continuum theory and from finite element method. Multilayer theory gave more accurate predictions of location and intensity of open-mode delamination stress. Currently being applied to predict open-mode delamination stress concentrations in horse-shoe-shaped composite test coupons.

  4. Emergent gauge field for a chiral bound state on curved surface

    NASA Astrophysics Data System (ADS)

    Shi, Zhe-Yu; Zhai, Hui

    2017-09-01

    Emergent physics is one of the most important concepts in modern physics, and one of the most intriguing examples is the emergent gauge field. Here we show that a gauge field emerges for a chiral bound state formed by two attractively interacting particles on a curved surface. We demonstrate explicitly that the center-of-mass wave function of such a deeply bound state is monopole harmonic instead of spherical harmonic, which means that the bound state experiences a magnetic monopole at the center of the sphere. This emergent gauge field is due to the coupling between the center-of-mass and the relative motion on a curved surface, and our results can be generalized to an arbitrary curved surface. This result establishes an intriguing connection between the space curvature and gauge field, and paves an alternative way to engineer a topological state with space curvature, and may be observed in a cold atom system.

  5. The association of patient characteristics and spinal curve parameters with Lenke classification types.

    PubMed

    Sponseller, Paul D; Flynn, John M; Newton, Peter O; Marks, Michelle C; Bastrom, Tracey P; Petcharaporn, Maty; McElroy, Mark J; Lonner, Baron S; Betz, Randal R

    2012-06-01

    Retrospective review. To determine the association of patient characteristics and spinal curve parameters with Lenke curve types. The Lenke curve classification may be used for surgical planning and clinical research. We retrospectively reviewed the records of 1912 patients with adolescent idiopathic scoliosis who underwent initial surgery at 21 years of age or younger; collected data on patient's age, patient's sex, primary curve magnitude (<50°, 50°-75°, and .75°), and Scoliosis Research Society (SRS) outcomes questionnaire (SRS-22) score; and compared that data by Lenke curve type. Analysis of variance and χ tests were used as appropriate (significance level, P ≤ 0.005). RESULTS.: Lenke types vary by sex: male patients had more major thoracic (types 1-4) than major thoracolumbar/lumbar (types 5 and 6) curves, fewer lumbar C-modifiers (32% vs. 44%), and less apical lumbar translation (1.1 vs. 1.7 cm). Lenke types vary by frequency: the most common type was 1 (50%); the least common, 4 (4%). Lenke types vary by magnitude: type 4 had the greatest percentage of large curves (52% of curves .75°), most smaller curves were types 1 and 5, and type 4 had the largest mean magnitude (78° ± 17°). Lenke types vary by patient age: type 5 curves occurred in the oldest patients (average age at surgery: 15.4 ± 2.2 vs. 14.3 ± 14.6 years for all others) despite having the lowest mean magnitude (P = 0.001); curve size was negatively correlated with age at surgery (r = -0.16, P = 0.001). Lenke types vary by patient self-image: patients with type 4 curves had lower preoperative SRS outcome scores for self-image than did patients with type 1 curves (P = 0.005). Lenke types vary by sex, frequency magnitude, patient age, and patient self-image, which should be considered in designing studies.

  6. Effect of soccer shoe upper on ball behaviour in curve kicks

    PubMed Central

    Ishii, Hideyuki; Sakurai, Yoshihisa; Maruyama, Takeo

    2014-01-01

    New soccer shoes have been developed by considering various concepts related to kicking, such as curving a soccer ball. However, the effects of shoes on ball behaviour remain unclear. In this study, by using a finite element simulation, we investigated the factors that affect ball behaviour immediately after impact in a curve kick. Five experienced male university soccer players performed one curve kick. We developed a finite element model of the foot and ball and evaluated the validity of the model by comparing the finite element results for the ball behaviour immediately after impact with the experimental results. The launch angle, ball velocity, and ball rotation in the finite element analysis were all in general agreement with the experimental results. Using the validated finite element model, we simulated the ball behaviour. The simulation results indicated that the larger the foot velocity immediately before impact, the larger the ball velocity and ball rotation. Furthermore, the Young's modulus of the shoe upper and the coefficient of friction between the shoe upper and the ball had little effect on the launch angle, ball velocity, and ball rotation. The results of this study suggest that the shoe upper does not significantly influence ball behaviour. PMID:25266788

  7. Effect of soccer shoe upper on ball behaviour in curve kicks

    NASA Astrophysics Data System (ADS)

    Ishii, Hideyuki; Sakurai, Yoshihisa; Maruyama, Takeo

    2014-08-01

    New soccer shoes have been developed by considering various concepts related to kicking, such as curving a soccer ball. However, the effects of shoes on ball behaviour remain unclear. In this study, by using a finite element simulation, we investigated the factors that affect ball behaviour immediately after impact in a curve kick. Five experienced male university soccer players performed one curve kick. We developed a finite element model of the foot and ball and evaluated the validity of the model by comparing the finite element results for the ball behaviour immediately after impact with the experimental results. The launch angle, ball velocity, and ball rotation in the finite element analysis were all in general agreement with the experimental results. Using the validated finite element model, we simulated the ball behaviour. The simulation results indicated that the larger the foot velocity immediately before impact, the larger the ball velocity and ball rotation. Furthermore, the Young's modulus of the shoe upper and the coefficient of friction between the shoe upper and the ball had little effect on the launch angle, ball velocity, and ball rotation. The results of this study suggest that the shoe upper does not significantly influence ball behaviour.

  8. Acceptance threshold theory can explain occurrence of homosexual behaviour.

    PubMed

    Engel, Katharina C; Männer, Lisa; Ayasse, Manfred; Steiger, Sandra

    2015-01-01

    Same-sex sexual behaviour (SSB) has been documented in a wide range of animals, but its evolutionary causes are not well understood. Here, we investigated SSB in the light of Reeve's acceptance threshold theory. When recognition is not error-proof, the acceptance threshold used by males to recognize potential mating partners should be flexibly adjusted to maximize the fitness pay-off between the costs of erroneously accepting males and the benefits of accepting females. By manipulating male burying beetles' search time for females and their reproductive potential, we influenced their perceived costs of making an acceptance or rejection error. As predicted, when the costs of rejecting females increased, males exhibited more permissive discrimination decisions and showed high levels of SSB; when the costs of accepting males increased, males were more restrictive and showed low levels of SSB. Our results support the idea that in animal species, in which the recognition cues of females and males overlap to a certain degree, SSB is a consequence of an adaptive discrimination strategy to avoid the costs of making rejection errors. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  9. BOX-COUNTING DIMENSION COMPUTED BY α-DENSE CURVES

    NASA Astrophysics Data System (ADS)

    García, G.; Mora, G.; Redtwitz, D. A.

    We introduce a method to reduce to the real case the calculus of the box-counting dimension of subsets of the unit cube In, n > 1. The procedure is based on the existence of special types of α-dense curves (a generalization of the space-filling curves) in In called δ-uniform curves.

  10. New Insight into Combined Model and Revised Model for RTD Curves in a Multi-strand Tundish

    NASA Astrophysics Data System (ADS)

    Lei, Hong

    2015-12-01

    The analysis for the residence time distribution (RTD) curve is one of the important experimental technologies to optimize the tundish design. But there are some issues about RTD analysis model. Firstly, the combined (or mixed) model and the revised model give different analysis results for the same RTD curve. Secondly, different upper limits of integral in the numerator for the mean residence time give different results for the same RTD curve. Thirdly, the negative dead volume fraction sometimes appears at the outer strand of the multi-strand tundish. In order to solve the above problems, it is necessary to have a deep insight into the RTD curve and to propose a reasonable method to analyze the RTD curve. The results show that (1) the revised model is not appropriate to treat with the RTD curve; (2) the conception of the visual single-strand tundish and the combined model with the dimensionless time at the cut-off point are applied to estimate the flow characteristics in the multi-strand tundish; and that (3) the mean residence time at each exit is the key parameter to estimate the similarity of fluid flow among strands.

  11. Parents Who Decline HPV Vaccination: Who Later Accepts and Why?

    PubMed

    Kornides, Melanie L; McRee, Annie-Laurie; Gilkey, Melissa B

    2018-03-01

    Parental declination contributes to low human papillomavirus (HPV) vaccination coverage among US adolescents, resulting in missed opportunities for cancer prevention. We sought to characterize parents' acceptance of HPV vaccination after declination ("secondary acceptance"). In September 2016, we conducted an online survey with a national sample of parents of children ages 11 to 17 years. For those who reported having ever declined HPV vaccination for their children (n = 494), our survey assessed whether they accepted the vaccine at a subsequent visit. We used multivariable logistic regression to assess correlates of secondary acceptance. Overall, 45% of parents reported secondary acceptance of HPV vaccination, and an additional 24% intended to vaccinate in the next 12 months. In multivariable analyses, secondary acceptance was associated with receiving follow-up counseling about HPV vaccination from a health care provider (odds ratio, 2.16; 95% confidence interval, 1.42-3.28). However, only 53% of parents overall reported receiving such counseling. Secondary acceptance was also associated with receiving a higher quality HPV vaccine recommendation from a provider during the initial discussion and greater satisfaction with provider communication, as well as higher vaccination confidence. Among the reasons for secondary acceptance, parents most commonly reported the child getting older (45%), learning more about HPV vaccine (34%), and receiving a provider recommendation (33%). Our findings suggest secondary acceptance of HPV vaccination is common, with more than two-thirds of parents in this national sample accepting or intending to accept HPV vaccination after declination. Providers should seek to motivate secondary acceptance by delivering repeated, high-quality recommendations for HPV vaccination. Copyright © 2017 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

  12. On spontaneous emission into guided modes with curved wavefronts

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yariv, A.; Margalit, S.

    1982-11-01

    The problem of spontaneous emission into guided modes with curved wavefronts is examined quantum mechanically. A classical result due to Petermann, which shows an increased emission rate relative to modes with planar phase fronts, is corroborated.

  13. Graphing Polar Curves

    ERIC Educational Resources Information Center

    Lawes, Jonathan F.

    2013-01-01

    Graphing polar curves typically involves a combination of three traditional techniques, all of which can be time-consuming and tedious. However, an alternative method--graphing the polar function on a rectangular plane--simplifies graphing, increases student understanding of the polar coordinate system, and reinforces graphing techniques learned…

  14. Acceptance of sugar reduction in flavored yogurt.

    PubMed

    Chollet, M; Gille, D; Schmid, A; Walther, B; Piccinali, P

    2013-09-01

    To investigate what level of sugar reduction is accepted in flavored yogurt, we conducted a hedonic test focusing on the degree of liking of the products and on optimal sweetness and aroma levels. For both flavorings (strawberry and coffee), consumers preferred yogurt containing 10% added sugar. However, yogurt containing 7% added sugar was also acceptable. On the just-about-right scale, yogurt containing 10% sugar was more often described as too sweet compared with yogurt containing 7% sugar. On the other hand, the sweetness and aroma intensity for yogurt containing 5% sugar was judged as too low. A second test was conducted to determine the effect of flavoring concentration on the acceptance of yogurt containing 7% sugar. Yogurts containing the highest concentrations of flavoring (11% strawberry, 0.75% coffee) were less appreciated. Additionally, the largest percentage of consumers perceived these yogurts as "not sweet enough." These results indicate that consumers would accept flavored yogurts with 7% added sugar instead of 10%, but 5% sugar would be too low. Additionally, an increase in flavor concentration is undesirable for yogurt containing 7% added sugar. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  15. [A modification of the Gompertz plot resulting from the age index by Ries and an approximation of the survivorship curve (author's transl)].

    PubMed

    Lohmann, W

    1978-01-01

    The shape of the survivorship curve can easily be interpreted on condition that the probability of death is proportional to an exponentially rising function of ageing. According to the formation of a sum for determining of the age index by Ries it was investigated to what extent the survivorship curve may be approximated by a sum of exponentials. It follows that the difference between the pure exponential function and a sum of exponentials by using possible values is lying within the random variation. Because the probability of death for different diseases is variable, the new statement is a better one.

  16. Consumer Acceptance of a Polyphenolic Coffee Beverage.

    PubMed

    Nguyen, Thuy; Kuchera, Meredith; Smoot, Katie; Diako, Charles; Vixie, Beata; Ross, Carolyn F

    2016-10-05

    The objective of this study was to determine if Chardonnay grape seed pomace (GSP), a waste stream of wine production, could be used as a functional ingredient in brewed coffee. Two consumer panels were conducted to assess the acceptance of coffee at coffee replacement (w/w) values of 0% (control), 6.25%, 12.50%, 18.75%, or 25% GSP. The 1st consumer panel (n = 80) assessed the coffee samples served "black." The 2nd panel (n = 67) assessed the coffee samples with adjustment (that is, sweeteners, milk, and cream) options available. Consumer sensory evaluation involved evaluating the 5 treatments individually for acceptance of appearance, aroma, taste/flavor, and overall acceptance using a 9-point hedonic scale. A check-all-that-apply questionnaire surveyed the sensory attributes describing aroma, appearance, and taste/flavor of the samples. Oxygen radical absorbance capacity was used to measure the effects of antioxidant levels in GSP coffee samples. Results showed that GSP could be added at 6.25% replacement without significantly affecting the overall consumer acceptance of coffee compared to the control (0% GSP). Above 6.25% GSP supplementation, the coffee beverage was described as more tan, milky, watery/dilute, and mild, and was generally less accepted by the consumers. GSP also increased the antioxidant capacity of the coffee compared to the control (0% GSP), with no significant differences among replacement values. Therefore, 6.25% GSP replacement is recommended for creating coffee beverages acceptable to consumers. Further in vivo investigation may substantiate the free-radical scavenging capacity of GSP coffee and its potential health benefits. © 2016 Institute of Food Technologists®.

  17. Gaussian decomposition of high-resolution melt curve derivatives for measuring genome-editing efficiency

    PubMed Central

    Zaboikin, Michail; Freter, Carl

    2018-01-01

    We describe a method for measuring genome editing efficiency from in silico analysis of high-resolution melt curve data. The melt curve data derived from amplicons of genome-edited or unmodified target sites were processed to remove the background fluorescent signal emanating from free fluorophore and then corrected for temperature-dependent quenching of fluorescence of double-stranded DNA-bound fluorophore. Corrected data were normalized and numerically differentiated to obtain the first derivatives of the melt curves. These were then mathematically modeled as a sum or superposition of minimal number of Gaussian components. Using Gaussian parameters determined by modeling of melt curve derivatives of unedited samples, we were able to model melt curve derivatives from genetically altered target sites where the mutant population could be accommodated using an additional Gaussian component. From this, the proportion contributed by the mutant component in the target region amplicon could be accurately determined. Mutant component computations compared well with the mutant frequency determination from next generation sequencing data. The results were also consistent with our earlier studies that used difference curve areas from high-resolution melt curves for determining the efficiency of genome-editing reagents. The advantage of the described method is that it does not require calibration curves to estimate proportion of mutants in amplicons of genome-edited target sites. PMID:29300734

  18. Classification of ASKAP Vast Radio Light Curves

    NASA Technical Reports Server (NTRS)

    Rebbapragada, Umaa; Lo, Kitty; Wagstaff, Kiri L.; Reed, Colorado; Murphy, Tara; Thompson, David R.

    2012-01-01

    The VAST survey is a wide-field survey that observes with unprecedented instrument sensitivity (0.5 mJy or lower) and repeat cadence (a goal of 5 seconds) that will enable novel scientific discoveries related to known and unknown classes of radio transients and variables. Given the unprecedented observing characteristics of VAST, it is important to estimate source classification performance, and determine best practices prior to the launch of ASKAP's BETA in 2012. The goal of this study is to identify light curve characterization and classification algorithms that are best suited for archival VAST light curve classification. We perform our experiments on light curve simulations of eight source types and achieve best case performance of approximately 90% accuracy. We note that classification performance is most influenced by light curve characterization rather than classifier algorithm.

  19. An Unified Multiscale Framework for Planar, Surface, and Curve Skeletonization.

    PubMed

    Jalba, Andrei C; Sobiecki, Andre; Telea, Alexandru C

    2016-01-01

    Computing skeletons of 2D shapes, and medial surface and curve skeletons of 3D shapes, is a challenging task. In particular, there is no unified framework that detects all types of skeletons using a single model, and also produces a multiscale representation which allows to progressively simplify, or regularize, all skeleton types. In this paper, we present such a framework. We model skeleton detection and regularization by a conservative mass transport process from a shape's boundary to its surface skeleton, next to its curve skeleton, and finally to the shape center. The resulting density field can be thresholded to obtain a multiscale representation of progressively simplified surface, or curve, skeletons. We detail a numerical implementation of our framework which is demonstrably stable and has high computational efficiency. We demonstrate our framework on several complex 2D and 3D shapes.

  20. Decision curve analysis: a novel method for evaluating prediction models.

    PubMed

    Vickers, Andrew J; Elkin, Elena B

    2006-01-01

    Diagnostic and prognostic models are typically evaluated with measures of accuracy that do not address clinical consequences. Decision-analytic techniques allow assessment of clinical outcomes but often require collection of additional information and may be cumbersome to apply to models that yield a continuous result. The authors sought a method for evaluating and comparing prediction models that incorporates clinical consequences,requires only the data set on which the models are tested,and can be applied to models that have either continuous or dichotomous results. The authors describe decision curve analysis, a simple, novel method of evaluating predictive models. They start by assuming that the threshold probability of a disease or event at which a patient would opt for treatment is informative of how the patient weighs the relative harms of a false-positive and a false-negative prediction. This theoretical relationship is then used to derive the net benefit of the model across different threshold probabilities. Plotting net benefit against threshold probability yields the "decision curve." The authors apply the method to models for the prediction of seminal vesicle invasion in prostate cancer patients. Decision curve analysis identified the range of threshold probabilities in which a model was of value, the magnitude of benefit, and which of several models was optimal. Decision curve analysis is a suitable method for evaluating alternative diagnostic and prognostic strategies that has advantages over other commonly used measures and techniques.

  1. Group Velocity Dispersion Curves from Wigner-Ville Distributions

    NASA Astrophysics Data System (ADS)

    Lloyd, Simon; Bokelmann, Goetz; Sucic, Victor

    2013-04-01

    With the widespread adoption of ambient noise tomography, and the increasing number of local earthquakes recorded worldwide due to dense seismic networks and many very dense temporary experiments, we consider it worthwhile to evaluate alternative Methods to measure surface wave group velocity dispersions curves. Moreover, the increased computing power of even a simple desktop computer makes it feasible to routinely use methods other than the typically employed multiple filtering technique (MFT). To that end we perform tests with synthetic and observed seismograms using the Wigner-Ville distribution (WVD) frequency time analysis, and compare dispersion curves measured with WVD and MFT with each other. Initial results suggest WVD to be at least as good as MFT at measuring dispersion, albeit at a greater computational expense. We therefore need to investigate if, and under which circumstances, WVD yields better dispersion curves than MFT, before considering routinely applying the method. As both MFT and WVD generally work well for teleseismic events and at longer periods, we explore how well the WVD method performs at shorter periods and for local events with smaller epicentral distances. Such dispersion information could potentially be beneficial for improving velocity structure resolution within the crust.

  2. High-resolution mapping of yield curve shape and evolution for high porosity sandstones

    NASA Astrophysics Data System (ADS)

    Bedford, J. D.; Faulkner, D.; Wheeler, J.; Leclere, H.

    2017-12-01

    The onset of permanent inelastic deformation for porous rock is typically defined by a yield curve plotted in P-Q space, where P is the effective mean stress and Q is the differential stress. Sandstones usually have broadly elliptical shaped yield curves, with the low pressure side of the ellipse associated with localized brittle faulting (dilation) and the high pressure side with distributed ductile deformation (compaction). However recent works have shown that these curves might not be perfectly elliptical and that significant evolution in shape occurs with continued deformation. We therefore use a novel stress-probing methodology to map in high-resolution the yield curve shape for Boise and Idaho Gray sandstones (36-38% porosity) and also investigate curve evolution with increasing deformation. The data reveal yield curves with a much flatter geometry than previously recorded for porous sandstone and that the compactive side of the curve is partly comprised of a near vertical limb. The yield curve evolution is found to be strongly dependent on the nature of inelastic strain. Samples that were compacted under a deviatoric load, with a component of inelastic shear strain, were found to have yield curves with peaks that are approximately 50% higher than similar porosity samples that were hydrostatically compacted (i.e. purely volumetric strain). The difference in yield curve evolution along the different loading paths is attributed to mechanical anisotropy that develops during deviatoric loading by the closure of preferentially orientated fractures. Increased shear strain also leads to the formation of a plateau at the peak of the yield curve as samples deform along the deviatoric loading path. These results have important implications for understanding how the strength of porous rock evolves along different stress paths, including during fluid extraction from hydrocarbon reservoirs where the stress state is rarely isotropic.

  3. Anesthesiologists' perceptions of minimum acceptable work habits of nurse anesthetists.

    PubMed

    Logvinov, Ilana I; Dexter, Franklin; Hindman, Bradley J; Brull, Sorin J

    2017-05-01

    Work habits are non-technical skills that are an important part of job performance. Although non-technical skills are usually evaluated on a relative basis (i.e., "grading on a curve"), validity of evaluation on an absolute basis (i.e., "minimum passing score") needs to be determined. Survey and observational study. None. None. The theme of "work habits" was assessed using a modification of Dannefer et al.'s 6-item scale, with scores ranging from 1 (lowest performance) to 5 (highest performance). E-mail invitations were sent to all consultant and fellow anesthesiologists at Mayo Clinic in Florida, Arizona, and Minnesota. Because work habits expectations can be generational, the survey was designed for adjustment based on all invited (responding or non-responding) anesthesiologists' year of graduation from residency. The overall mean±standard deviation of the score for anesthesiologists' minimum expectations of nurse anesthetists' work habits was 3.64±0.66 (N=48). Minimum acceptable scores were correlated with the year of graduation from anesthesia residency (linear regression P=0.004). Adjusting for survey non-response using all N=207 anesthesiologists, the mean of the minimum acceptable work habits adjusted for year of graduation was 3.69 (standard error 0.02). The minimum expectations for nurse anesthetists' work habits were compared with observational data obtained from the University of Iowa. Among 8940 individual nurse anesthetist work habits scores, only 2.6% were <3.69. All N=65 of the Iowa nurse anesthetists' mean work habits scores were significantly greater than the Mayo estimate (3.69) for the minimum expectations; all P<0.00024. Our results suggest that routinely evaluated work habits of nurse anesthetists within departments should not be compared with an appropriate minimum score (i.e., of 3.69). Instead, work habits scores should be analyzed based on relative reporting among anesthetists. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Evaluating the Correlation between Anteroposterior and Mediolateral Compensatory Curves and their Influence on Dentoskeletal Morphology-An In vitro CBCT Study.

    PubMed

    Babu, K Suresh; Kumar, A Nanda; Kommi, Pradeep Babu; Krishnan, P Hari; Kumar, M Senthil; Sabapathy, R Senkutvan; Kumar, V Vijay

    2017-08-01

    To date, many orthodontist corrects malocclusion based on patients aesthetic concern and fails to correct the compensatory curves. This scenario is due to less insight on understanding relationship of compensatory curves and its correlation in treatment prognosis. The purpose of this study was to evaluate the correlation between the curve of Spee, curve of Monson and curve of Wilson, their influence on dentoskeletal morphology and their contribution to occlusal stability. This study included 104 non-orthodontic models. The study casts were subdivided into two groups, Group-I consist 52 non- orthodontic models with Class-I molar relationship and Group-II consist of 52 non- orthodontic models with Class-II molar relationship. Curve of Spee was measured with digital vernier caliper, curve of Monson estimated using specially made sphere (7″inch, 8″ inch and 9″inch) and curve of Wilson was evaluated using Cone Beam Computed Technology (CBCT). Mean value for curve of Spee obtained for Group I and Group II is 1.844 mm and 3.188 mm. For curve of Monson, the mean value obtained for Group I and Group-II is 7.65 inches and 7.40 inches. The mean degree obtained for the curve of Wilson for Group I and Group-II is 12.05 and 16.49. The result showed positive correlation between curve of Spee and curve of Wilson and no correlation between curve of Monson and curve of Wilson and no correlation between curve of Spee and curve of Monson. The Pearson correlation coefficient analysis from the study confirmed these results. The results showed positive correlation between curve of spee and curve of Wilson. The data found in this study can be applied clinically for Class I and Class II malocclusion patients on diagnosis and treatment planning.

  5. Extracting 3D Parametric Curves from 2D Images of Helical Objects.

    PubMed

    Willcocks, Chris G; Jackson, Philip T G; Nelson, Carl J; Obara, Boguslaw

    2017-09-01

    Helical objects occur in medicine, biology, cosmetics, nanotechnology, and engineering. Extracting a 3D parametric curve from a 2D image of a helical object has many practical applications, in particular being able to extract metrics such as tortuosity, frequency, and pitch. We present a method that is able to straighten the image object and derive a robust 3D helical curve from peaks in the object boundary. The algorithm has a small number of stable parameters that require little tuning, and the curve is validated against both synthetic and real-world data. The results show that the extracted 3D curve comes within close Hausdorff distance to the ground truth, and has near identical tortuosity for helical objects with a circular profile. Parameter insensitivity and robustness against high levels of image noise are demonstrated thoroughly and quantitatively.

  6. Magnetofluid dynamics in curved spacetime

    NASA Astrophysics Data System (ADS)

    Bhattacharjee, Chinmoy; Das, Rupam; Mahajan, S. M.

    2015-03-01

    A grand unified field Mμ ν is constructed from Maxwell's field tensor and an appropriately modified flow field, both nonminimally coupled to gravity, to analyze the dynamics of hot charged fluids in curved background space-time. With a suitable 3 +1 decomposition, this new formalism of the hot fluid is then applied to investigate the vortical dynamics of the system. Finally, the equilibrium state for plasma with nonminimal coupling through Ricci scalar R to gravity is investigated to derive a double Beltrami equation in curved space-time.

  7. Proposed algorithm for determining the delta intercept of a thermocouple psychrometer curve

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurzmack, M.A.

    1993-07-01

    The USGS Hydrologic Investigations Program is currently developing instrumentation to study the unsaturated zone at Yucca Mountain in Nevada. Surface-based boreholes up to 2,500 feet in depth will be drilled, and then instrumented in order to define the water potential field within the unsaturated zone. Thermocouple psychrometers will be used to monitor the in-situ water potential. An algorithm is proposed for simply and efficiently reducing a six wire thermocouple psychrometer voltage output curve to a single value, the delta intercept. The algorithm identifies a plateau region in the psychrometer curve and extrapolates a linear regression back to the initial startmore » of relaxation. When properly conditioned for the measurements being made, the algorithm results in reasonable results even with incomplete or noisy psychrometer curves over a 1 to 60 bar range.« less

  8. Detecting time-specific differences between temporal nonlinear curves: Analyzing data from the visual world paradigm

    PubMed Central

    Oleson, Jacob J; Cavanaugh, Joseph E; McMurray, Bob; Brown, Grant

    2015-01-01

    In multiple fields of study, time series measured at high frequencies are used to estimate population curves that describe the temporal evolution of some characteristic of interest. These curves are typically nonlinear, and the deviations of each series from the corresponding curve are highly autocorrelated. In this scenario, we propose a procedure to compare the response curves for different groups at specific points in time. The method involves fitting the curves, performing potentially hundreds of serially correlated tests, and appropriately adjusting the overall alpha level of the tests. Our motivating application comes from psycholinguistics and the visual world paradigm. We describe how the proposed technique can be adapted to compare fixation curves within subjects as well as between groups. Our results lead to conclusions beyond the scope of previous analyses. PMID:26400088

  9. Synthesis of capillary pressure curves from post-stack seismic data with the use of intelligent estimators: A case study from the Iranian part of the South Pars gas field, Persian Gulf Basin

    NASA Astrophysics Data System (ADS)

    Golsanami, Naser; Kadkhodaie-Ilkhchi, Ali; Erfani, Amir

    2015-01-01

    Capillary pressure curves are important data for reservoir rock typing, analyzing pore throat distribution, determining height above free water level, and reservoir simulation. Laboratory experiments provide accurate data, however they are expensive, time-consuming and discontinuous through the reservoir intervals. The current study focuses on synthesizing artificial capillary pressure (Pc) curves from seismic attributes with the use of artificial intelligent systems including Artificial Neural Networks (ANNs), Fuzzy logic (FL) and Adaptive Neuro-Fuzzy Inference Systems (ANFISs). The synthetic capillary pressure curves were achieved by estimating pressure values at six mercury saturation points. These points correspond to mercury filled pore volumes of core samples (Hg-saturation) at 5%, 20%, 35%, 65%, 80%, and 90% saturations. To predict the synthetic Pc curve at each saturation point, various FL, ANFIS and ANN models were constructed. The varying neural network models differ in their training algorithm. Based on the performance function, the most accurately functioning models were selected as the final solvers to do the prediction process at each of the above-mentioned mercury saturation points. The constructed models were then tested at six depth points of the studied well which were already unforeseen by the models. The results show that the Fuzzy logic and neuro-fuzzy models were not capable of making reliable estimations, while the predictions from the ANN models were satisfyingly trustworthy. The obtained results showed a good agreement between the laboratory derived and synthetic capillary pressure curves. Finally, a 3D seismic cube was captured for which the required attributes were extracted and the capillary pressure cube was estimated by using the developed models. In the next step, the synthesized Pc cube was compared with the seismic cube and an acceptable correspondence was observed.

  10. Turbine blade profile design method based on Bezier curves

    NASA Astrophysics Data System (ADS)

    Alexeev, R. A.; Tishchenko, V. A.; Gribin, V. G.; Gavrilov, I. Yu.

    2017-11-01

    In this paper, the technique of two-dimensional parametric blade profile design is presented. Bezier curves are used to create the profile geometry. The main feature of the proposed method is an adaptive approach of curve fitting to given geometric conditions. Calculation of the profile shape is produced by multi-dimensional minimization method with a number of restrictions imposed on the blade geometry.The proposed method has been used to describe parametric geometry of known blade profile. Then the baseline geometry was modified by varying some parameters of the blade. The numerical calculation of obtained designs has been carried out. The results of calculations have shown the efficiency of chosen approach.

  11. Percentile curves for skinfold thickness for Canadian children and youth

    PubMed Central

    Ashley-Martin, Jillian; Maguire, Bryan; Hamilton, David C.

    2016-01-01

    Background. Skinfold thickness (SFT) measurements are a reliable and feasible method for assessing body fat in children but their use and interpretation is hindered by the scarcity of reference values in representative populations of children. The objective of the present study was to develop age- and sex-specific percentile curves for five SFT measures (biceps, triceps, subscapular, suprailiac, medial calf) in a representative population of Canadian children and youth. Methods. We analyzed data from 3,938 children and adolescents between 6 and 19 years of age who participated in the Canadian Health Measures Survey cycles 1 (2007/2009) and 2 (2009/2011). Standardized procedures were used to measure SFT. Age- and sex-specific centiles for SFT were calculated using the GAMLSS method. Results. Percentile curves were materially different in absolute value and shape for boys and girls. Percentile girls in girls steadily increased with age whereas percentile curves in boys were characterized by a pubertal centered peak. Conclusions. The current study has presented for the first time percentile curves for five SFT measures in a representative sample of Canadian children and youth. PMID:27547554

  12. Feasible Path Generation Using Bezier Curves for Car-Like Vehicle

    NASA Astrophysics Data System (ADS)

    Latip, Nor Badariyah Abdul; Omar, Rosli

    2017-08-01

    When planning a collision-free path for an autonomous vehicle, the main criteria that have to be considered are the shortest distance, lower computation time and completeness, i.e. a path can be found if one exists. Besides that, a feasible path for the autonomous vehicle is also crucial to guarantee that the vehicle can reach the target destination considering its kinematic constraints such as non-holonomic and minimum turning radius. In order to address these constraints, Bezier curves is applied. In this paper, Bezier curves are modeled and simulated using Matlab software and the feasibility of the resulting path is analyzed. Bezier curve is derived from a piece-wise linear pre-planned path. It is found that the Bezier curves has the capability of making the planned path feasible and could be embedded in a path planning algorithm for an autonomous vehicle with kinematic constraints. It is concluded that the length of segments of the pre-planned path have to be greater than a nominal value, derived from the vehicle wheelbase, maximum steering angle and maximum speed to ensure the path for the autonomous car is feasible.

  13. Estimated flow-duration curves for selected ungaged sites in Kansas

    USGS Publications Warehouse

    Studley, S.E.

    2001-01-01

    Flow-duration curves for 1968-98 were estimated for 32 ungaged sites in the Missouri, Smoky Hill-Saline, Solomon, Marais des Cygnes, Walnut, Verdigris, and Neosho River Basins in Kansas. Also included from a previous report are estimated flow-duration curves for 16 ungaged sites in the Cimarron and lower Arkansas River Basins in Kansas. The method of estimation used six unique factors of flow duration: (1) mean streamflow and percentage duration of mean streamflow, (2) ratio of 1-percent-duration streamflow to mean streamflow, (3) ratio of 0.1-percent-duration streamflow to 1-percent-duration streamflow, (4) ratio of 50-percent-duration streamflow to mean streamflow, (5) percentage duration of appreciable streamflow (0.10 cubic foot per second), and (6) average slope of the flow-duration curve. These factors were previously developed from a regionalized study of flow-duration curves using streamflow data for 1921-76 from streamflow-gaging stations with drainage areas of 100 to 3,000 square miles. The method was tested on a currently (2001) measured, continuous-record streamflow-gaging station on Salt Creek near Lyndon, Kansas, with a drainage area of 111 square miles and was found to adequately estimate the computed flow-duration curve for the station. The method also was tested on a currently (2001) measured, continuous-record, streamflow-gaging station on Soldier Creek near Circleville, Kansas, with a drainage area of 49.3 square miles. The results of the test on Soldier Creek near Circleville indicated that the method could adequately estimate flow-duration curves for sites with drainage areas of less than 100 square miles. The low-flow parts of the estimated flow-duration curves were verified or revised using 137 base-flow discharge measurements made during 1999-2000 at the 32 ungaged sites that were correlated with base-flow measurements and flow-duration analyses performed at nearby, long-term, continuous-record, streamflow-gaging stations (index stations

  14. 3D MHD Simulations of Laser Plasma Guiding in Curved Magnetic Field

    NASA Astrophysics Data System (ADS)

    Roupassov, S.; Rankin, R.; Tsui, Y.; Capjack, C.; Fedosejevs, R.

    1999-11-01

    The guiding and confinement of laser produced plasma in a curved magnetic field has been investigated numerically. These studies were motivated by experiments on pulsed laser deposition of diamond-like films [1] in which a 1kG magnetic field in a curved solenoid geometry was utilized to steer a carbon plasma around a curved trajectory and thus to separate it from unwanted macroparticles produced by the laser ablation. The purpose of the modeling was to characterize the plasma dynamics during the propagation through the magnetic guide field and to investigate the effect of different magnetic field configurations. A 3D curvilinear ADI code developed on the basis of an existing Cartesian code [2] was employed to simulate the underlying resistive one-fluid MHD model. Issues such as large regions of low background density and nonreflective boundary conditions were addressed. Results of the simulations in a curved guide field will be presented and compared to experimental results. [1] Y.Y. Tsui, D. Vick and R. Fedosejevs, Appl. Phys. Lett. 70 (15), pp. 1953-57, 1997. [2] R. Rankin, and I. Voronkov, in "High Performance Computing Systems and Applications", pp. 59-69, Kluwer AP, 1998.

  15. Effect of driving experience on anticipatory look-ahead fixations in real curve driving.

    PubMed

    Lehtonen, Esko; Lappi, Otto; Koirikivi, Iivo; Summala, Heikki

    2014-09-01

    Anticipatory skills are a potential factor for novice drivers' curve accidents. Behavioural data show that steering and speed regulation are affected by forward planning of the trajectory. When approaching a curve, the relevant visual information for online steering control and for planning is located at different eccentricities, creating a need to disengage the gaze from the guidance of steering to anticipatory look-ahead fixations over curves. With experience, peripheral vision can be increasingly used in the visual guidance of steering. This could leave experienced drivers more gaze time to invest on look-ahead fixations over curves, facilitating the trajectory planning. Eighteen drivers (nine novices, nine experienced) drove an instrumented vehicle on a rural road four times in both directions. Their eye movements were analyzed in six curves. The trajectory of the car was modelled and divided to approach, entry and exit phases. Experienced drivers spent less time on the road-ahead and more time on the look-ahead fixations over the curves. Look-ahead fixations were also more common in the approach than in the entry phase of the curve. The results suggest that with experience drivers allocate greater part of their visual attention to trajectory planning. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Alternate methods for FAAT S-curve generation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kaufman, A.M.

    The FAAT (Foreign Asset Assessment Team) assessment methodology attempts to derive a probability of effect as a function of incident field strength. The probability of effect is the likelihood that the stress put on a system exceeds its strength. In the FAAT methodology, both the stress and strength are random variables whose statistical properties are estimated by experts. Each random variable has two components of uncertainty: systematic and random. The systematic uncertainty drives the confidence bounds in the FAAT assessment. Its variance can be reduced by improved information. The variance of the random uncertainty is not reducible. The FAAT methodologymore » uses an assessment code called ARES to generate probability of effect curves (S-curves) at various confidence levels. ARES assumes log normal distributions for all random variables. The S-curves themselves are log normal cumulants associated with the random portion of the uncertainty. The placement of the S-curves depends on confidence bounds. The systematic uncertainty in both stress and strength is usually described by a mode and an upper and lower variance. Such a description is not consistent with the log normal assumption of ARES and an unsatisfactory work around solution is used to obtain the required placement of the S-curves at each confidence level. We have looked into this situation and have found that significant errors are introduced by this work around. These errors are at least several dB-W/cm{sup 2} at all confidence levels, but they are especially bad in the estimate of the median. In this paper, we suggest two alternate solutions for the placement of S-curves. To compare these calculational methods, we have tabulated the common combinations of upper and lower variances and generated the relevant S-curves offsets from the mode difference of stress and strength.« less

  17. Measuring Model Rocket Engine Thrust Curves

    ERIC Educational Resources Information Center

    Penn, Kim; Slaton, William V.

    2010-01-01

    This paper describes a method and setup to quickly and easily measure a model rocket engine's thrust curve using a computer data logger and force probe. Horst describes using Vernier's LabPro and force probe to measure the rocket engine's thrust curve; however, the method of attaching the rocket to the force probe is not discussed. We show how a…

  18. Locating Groundwater Pollution Source using Breakthrough Curve Characteristics and Artificial Neural Networks

    NASA Astrophysics Data System (ADS)

    Kumar, J.; Jain, A.; Srivastava, R.

    2005-12-01

    The identification of pollution sources in aquifers is an important area of research not only for the hydrologists but also for the local and Federal agencies and defense organizations. Once the data in terms of pollutant concentration measurements at observation wells become known, it is important to identify the polluting industry in order to implement punitive or remedial measures. Traditionally, hydrologists have relied on the conceptual methods for the identification of groundwater pollution sources. The problem of identification of groundwater pollution sources using the conceptual methods requires a thorough understanding of the groundwater flow and contaminant transport processes and inverse modeling procedures that are highly complex and difficult to implement. Recently, the soft computing techniques, such as artificial neural networks (ANNs) and genetic algorithms, have provided an attractive and easy to implement alternative to solve complex problems efficiently. Some researchers have used ANNs for the identification of pollution sources in aquifers. A major problem with most previous studies using ANNs has been the large size of the neural networks that are needed to model the inverse problem. The breakthrough curves at an observation well may consist of hundreds of concentration measurements, and presenting all of them to the input layer of an ANN not only results in humongous networks but also requires large amount of training and testing data sets to develop the ANN models. This paper presents the results of a study aimed at using certain characteristics of the breakthrough curves and ANNs for determining the distance of the pollution source from a given observation well. Two different neural network models are developed that differ in the manner of characterizing the breakthrough curves. The first ANN model uses five parameters, similar to the synthetic unit hydrograph parameters, to characterize the breakthrough curves. The five parameters employed

  19. Influence of Dissipated Forming Energy on Flow Curves of Austenitic Stainless Steel

    NASA Astrophysics Data System (ADS)

    Steinheimer, Rainer; Engel, Bernd

    2011-08-01

    Finite element (FE) simulations are widely used to design sheet metal forming processes. Flow curves and forming limit curves of the semi-finished goods are required for these computations. Mostly flow curves are obtained by conversions of stress-strain caracteristics from uniaxial tensile tests. In these calculations, uniform strain and stress within the gauge length is postulated until reaching elongation without necking. This precondition is true only if specimens remain homogenous during the test procedure. Effects from dissipated mechanical energy and heat flow on the results of uniaxial tensile tests were examined with specimen made of austenitic stainless steels with practical experiments and FE simulations.

  20. Constraining brane tension using rotation curves of galaxies

    NASA Astrophysics Data System (ADS)

    García-Aspeitia, Miguel A.; Rodríguez-Meza, Mario A.

    2018-04-01

    We present in this work a study of brane theory phenomenology focusing on the brane tension parameter, which is the main observable of the theory. We show the modifications steaming from the presence of branes in the rotation curves of spiral galaxies for three well known dark matter density profiles: Pseudo isothermal, Navarro-Frenk-White and Burkert dark matter density profiles. We estimate the brane tension parameter using a sample of high resolution observed rotation curves of low surface brightness spiral galaxies and a synthetic rotation curve for the three density profiles. Also, the fittings using the brane theory model of the rotation curves are compared with standard Newtonian models. We found that Navarro-Frenk-White model prefers lower values of the brane tension parameter, on the average λ ∼ 0.73 × 10‑3eV4, therefore showing clear brane effects. Burkert case does prefer higher values of the tension parameter, on the average λ ∼ 0.93 eV4 ‑ 46 eV4, i.e., negligible brane effects. Whereas pseudo isothermal is an intermediate case. Due to the low densities found in the galactic medium it is almost impossible to find evidence of the presence of extra dimensions. In this context, we found that our results show weaker bounds to the brane tension values in comparison with other bounds found previously, as the lower value found for dwarf stars composed of a polytropic equation of state, λ ≈ 104 MeV4.

  1. Fitting milk production curves through nonlinear mixed models.

    PubMed

    Piccardi, Monica; Macchiavelli, Raúl; Funes, Ariel Capitaine; Bó, Gabriel A; Balzarini, Mónica

    2017-05-01

    The aim of this work was to fit and compare three non-linear models (Wood, Milkbot and diphasic) to model lactation curves from two approaches: with and without cow random effect. Knowing the behaviour of lactation curves is critical for decision-making in a dairy farm. Knowledge of the model of milk production progress along each lactation is necessary not only at the mean population level (dairy farm), but also at individual level (cow-lactation). The fits were made in a group of high production and reproduction dairy farms; in first and third lactations in cool seasons. A total of 2167 complete lactations were involved, of which 984 were first-lactations and the remaining ones, third lactations (19 382 milk yield tests). PROC NLMIXED in SAS was used to make the fits and estimate the model parameters. The diphasic model resulted to be computationally complex and barely practical. Regarding the classical Wood and MilkBot models, although the information criteria suggest the selection of MilkBot, the differences in the estimation of production indicators did not show a significant improvement. The Wood model was found to be a good option for fitting the expected value of lactation curves. Furthermore, the three models fitted better when the subject (cow) random effect was considered, which is related to magnitude of production. The random effect improved the predictive potential of the models, but it did not have a significant effect on the production indicators derived from the lactation curves, such as milk yield and days in milk to peak.

  2. Is larger scoliosis curve magnitude associated with increased perioperative health-care resource utilization?: a multicenter analysis of 325 adolescent idiopathic scoliosis curves.

    PubMed

    Miyanji, Firoz; Slobogean, Gerard P; Samdani, Amer F; Betz, Randal R; Reilly, Christopher W; Slobogean, Bronwyn L; Newton, Peter O

    2012-05-02

    The treatment of patients with large adolescent idiopathic scoliosis curves has been associated with increased surgical complexity. The purpose of this study was to determine whether surgical correction of larger adolescent idiopathic scoliosis curves increased the utilization of health-care resources and to identify potential predictors associated with increased perioperative health-care resource utilization. A nested cohort of patients with adolescent idiopathic scoliosis with Lenke type 1A and 1B curves were identified from a prospective longitudinal multicenter database. Four perioperative outcomes were selected as the primary health-care resource utilization outcomes of interest: operative time, number of vertebral levels instrumented, duration of hospitalization, and allogeneic blood transfusion. The effect of curve magnitude on these outcomes was assessed with use of univariate and multivariate regression. Three hundred and twenty-five patients with a mean age of 15 ± 2 years were included. The mean main thoracic curve was 54.4° ± 7.8°. Larger curves were associated with longer operative time (p = 0.03), a greater number of vertebral levels instrumented (p = 0.0005), and the need for blood transfusion (with every 10° increase associated with 1.5 times higher odds of receiving a transfusion). In addition to curve magnitude, surgical center, bone graft method, and upper and lower instrumented levels were strong predictors of operative time (R2 = 0.76). The duration of hospitalization was influenced by the surgical center and intraoperative blood loss (R2 < 0.4), whereas the number of levels instrumented was influenced by the curve magnitude, curve correction percentage, upper instrumented vertebra, and surgical center (R2 = 0.64). Correction of larger curves was associated with increased utilization of perioperative health-care resources, specifically longer operative time, a greater number of vertebral levels instrumented, and higher odds of receiving a

  3. Next-Generation Intensity-Duration-Frequency Curves for Hydrologic Design in Snow-Dominated Environments

    NASA Astrophysics Data System (ADS)

    Yan, Hongxiang; Sun, Ning; Wigmosta, Mark; Skaggs, Richard; Hou, Zhangshuan; Leung, Ruby

    2018-02-01

    There is a renewed focus on the design of infrastructure resilient to extreme hydrometeorological events. While precipitation-based intensity-duration-frequency (IDF) curves are commonly used as part of infrastructure design, a large percentage of peak runoff events in snow-dominated regions are caused by snowmelt, particularly during rain-on-snow (ROS) events. In these regions, precipitation-based IDF curves may lead to substantial overestimation/underestimation of design basis events and subsequent overdesign/underdesign of infrastructure. To overcome this deficiency, we proposed next-generation IDF (NG-IDF) curves, which characterize the actual water reaching the land surface. We compared NG-IDF curves to standard precipitation-based IDF curves for estimates of extreme events at 376 Snowpack Telemetry (SNOTEL) stations across the western United States that each had at least 30 years of high-quality records. We found standard precipitation-based IDF curves at 45% of the stations were subject to underdesign, many with significant underestimation of 100 year extreme events, for which the precipitation-based IDF curves can underestimate water potentially available for runoff by as much as 125% due to snowmelt and ROS events. The regions with the greatest potential for underdesign were in the Pacific Northwest, the Sierra Nevada Mountains, and the Middle and Southern Rockies. We also found the potential for overdesign at 20% of the stations, primarily in the Middle Rockies and Arizona mountains. These results demonstrate the need to consider snow processes in the development of IDF curves, and they suggest use of the more robust NG-IDF curves for hydrologic design in snow-dominated environments.

  4. User Acceptance of Picture Archiving and Communication System in the Emergency Department

    PubMed Central

    Goodarzi, Hassan; Khatami, Seyed-Masoud; Javadzadeh, Hammidreza; Mahmoudi, Sadrollah; Khajehpour, Hojjatollah; Heidari, Soleiman; Khodaparast, Morteza; Ebrahimi, Ali; Rasouli, Hamidreza; Ghane, Mohammadreza; Faraji, Mehrdad; Hassanpour, Kasra

    2016-01-01

    Background Picture archiving and communication system (PACS) has allowed the medical images to be transmitted, stored, retrieved, and displayed in different locations of a hospital or health system. Using PACS in the emergency department will eventually result in improved efficiency and patient care. In spite of the abundant benefits of employing PACS, there are some challenges in implementing this technology like users’ resistance to accept the technology, which has a critical role in PACS success. Objectives In this study, we will assess and compare user acceptance of PACS in the emergency departments of three different hospitals and investigate the effect of socio-demographic factors on this acceptance. Materials and Methods A variant of technology acceptance model (TAM) has been used in order to measure the acceptance level of PACS in the emergency department of three educational hospitals in Iran. A previously used questionnaire was validated and utilized to collect the study data. A stepwise multiple regression model was used to predict factors influencing acceptance score as the dependent variable. Results Mean age of participants was 32.9 years (standard deviation [SD] = 6.08). Participants with the specialty degree got a higher acceptance score than the three other groups (Mean ± SD = 4.17 ± 0.20). Age, gender, degree of PACS usage and participant’s occupation (profession) did not influence the acceptance score. In our multiple regression model, all three variables of perceived usefulness (PU), perceived ease of use (PEU) and the effect of PACS (change) had a significant effect in the prediction of acceptance. The most influencing factor was change with the beta of 0.22 (P value < 0.001). Conclusion PACS is highly accepted in all three emergency departments especially among specialists. PU, PEU and change are factors influencing PACS acceptance. Our study can be used as an evidence of PACS acceptance in emergency wards. PMID:27679692

  5. A Tangent Bundle Theory for Visual Curve Completion.

    PubMed

    Ben-Yosef, Guy; Ben-Shahar, Ohad

    2012-07-01

    Visual curve completion is a fundamental perceptual mechanism that completes the missing parts (e.g., due to occlusion) between observed contour fragments. Previous research into the shape of completed curves has generally followed an "axiomatic" approach, where desired perceptual/geometrical properties are first defined as axioms, followed by mathematical investigation into curves that satisfy them. However, determining psychophysically such desired properties is difficult and researchers still debate what they should be in the first place. Instead, here we exploit the observation that curve completion is an early visual process to formalize the problem in the unit tangent bundle R(2) × S(1), which abstracts the primary visual cortex (V1) and facilitates exploration of basic principles from which perceptual properties are later derived rather than imposed. Exploring here the elementary principle of least action in V1, we show how the problem becomes one of finding minimum-length admissible curves in R(2) × S(1). We formalize the problem in variational terms, we analyze it theoretically, and we formulate practical algorithms for the reconstruction of these completed curves. We then explore their induced visual properties vis-à-vis popular perceptual axioms and show how our theory predicts many perceptual properties reported in the corresponding perceptual literature. Finally, we demonstrate a variety of curve completions and report comparisons to psychophysical data and other completion models.

  6. Comparisons of Buckling Capacity Curves of Pressurized Spheres with EDR Provisions and Experimental Results

    NASA Astrophysics Data System (ADS)

    Błażejewski, Paweł; Marcinowski, Jakub

    2017-06-01

    Existing provisions leading to the assessment of the buckling resistance of pressurised spherical shells were published in the European Design Recommendations (EDR) [1]. This book comprises rules which refer to the stability of steel shells of different shapes. In the first step of the general procedure they require calculation of two reference quantities: the elastic critical buckling reference pRcr and the plastic reference resistance pRpl. These quantities should be determined in the linear buckling analysis (LBA) and in the materially nonlinear analysis (MNA) respectively. Only in the case of spherical shells the existing procedure has exceptional character. It is based on the geometrically nonlinear analysis (GNA) and on the geometrically and materially nonlinear analysis (GMNA), respectively. From this reason, in this particular case there was a need to change the existing approach. The new procedure was presented in the work of Błażejewski & Marcinowski in 2016 (comp. [2]). All steps of the procedure leading to the assessment of buckling resistance of pressurized steel, spherical shells were presented in this work. The elaborated procedure is consistent with provisions of Eurocode EN1993-1-6 (comp. [3]) and with recommendations inserted in Europeans Design Recommendations [1]. The proposed capacity curves were compared with existing proposal published in [1] for three different fabrication quality classes predicted in [3]. In this work also comparisons of author's proposals with experimental results obtained by other authors were presented.

  7. Comparison of Learning Curves for Major and Minor Laparoscopic Liver Resection.

    PubMed

    Lee, Woohyung; Woo, Jung-Woo; Lee, Jin-Kwon; Park, Ji-Ho; Kim, Ju-Yeon; Kwag, Seung-Jin; Park, Taejin; Jeong, Sang-Ho; Ju, Young-Tae; Jeong, Eun-Jung; Lee, Young-Joon; Choi, Sang-Kyung; Hong, Soon-Chan; Jeong, Chi-Young

    2016-06-01

    Because laparoscopic liver resection (LLR) has a steep learning curve, analyzing experience is important for trainees. Several authors have described the learning curve of LLR, without comparing the learning curves between major and minor LLR. Perioperative data were retrieved from the medical records of 170 consecutive patients who underwent LLR by a single surgeon at a tertiary hospital. Learning curves were generated and compared between major and minor LLR using cumulative sum control charts and the moving average. Major and minor LLR was performed in 96 and 74 patients, respectively. The learning curves showed a steady state after case 50 for major LLR. Because of discordant results in minor LLR, subgroup analyses were performed, showing competency in LLR after cases 25 and 35 for left lateral sectionectomy and tumorectomy, respectively. Transfused red blood cell volume (0.6 versus 2.2 packs, P < .001) decreased after achievement of competence in major LLR. Blood loss exceeding 500 mL (odds ratio 2.395, 95% confidence interval 1.096-5.233, P = .028) was independently associated with LLR failure. The number of cases required to accomplish LLR differed according to the extent of resection. Extensive blood loss was independently associated with LLR failure.

  8. Procedure for curve warning signing, delineation, and advisory speeds for horizontal curves.

    DOT National Transportation Integrated Search

    2010-09-30

    Horizontal curves are relatively dangerous features, with collision rates at least 1.5 times that of comparable tangent : sections on average. To help make these segments safer, this research developed consistent study methods with : which field pers...

  9. Neck curve polynomials in neck rupture model

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurniadi, Rizal; Perkasa, Yudha S.; Waris, Abdul

    2012-06-06

    The Neck Rupture Model is a model that explains the scission process which has smallest radius in liquid drop at certain position. Old fashion of rupture position is determined randomly so that has been called as Random Neck Rupture Model (RNRM). The neck curve polynomials have been employed in the Neck Rupture Model for calculation the fission yield of neutron induced fission reaction of {sup 280}X{sub 90} with changing of order of polynomials as well as temperature. The neck curve polynomials approximation shows the important effects in shaping of fission yield curve.

  10. ACCEPTANCE OF FUNCTIONAL FOOD AMONG CHILEAN CONSUMERS: APPLE LEATHER.

    PubMed

    van Vliet, Maya; Adasme-Berrios, Cristian; Schnettler, Berta

    2015-10-01

    the aim of this study is to measure acceptance of a specific functional food: apple (fruit) leather, based on organoleptic characteristics and to identify consumer types and preferences for natural additives which increase the product's functionality and meet current nutritional needs. a sample of 800 consumers provided an evaluation of apple leather in terms of acceptance (liking). A sensorial panel was carried out using a 9-point hedonic scale. Cluster analysis was used to identify different acceptance-based consumer types. In addition, a conjoint analysis was carried out to determine preference for different additives. the cluster analysis resulted in four groups with significant differences in the average likings obtained from the sensory panel. Results indicate that the sweetness of the tested apple leather was evaluated best among all groups and, on average, color was rated as the worst attribute. However, overall likings differ significantly between groups. Results from the conjoint analysis indicate that, in general, consumers prefer natural additives included in the product which enhance functionality. although there is a "global acceptance" of the product, there are significant differences between groups. The results of the conjoint analysis indicate that, in general, consumers prefer the aggregation of natural additives which increase the product's functionality. Apple leather with natural additives, such as anticariogenics and antioxidants, can be considered a functional substitute of unhealthy snacks and/or sweets. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

  11. Light extraction block with curved surface

    DOEpatents

    Levermore, Peter; Krall, Emory; Silvernail, Jeffrey; Rajan, Kamala; Brown, Julia J.

    2016-03-22

    Light extraction blocks, and OLED lighting panels using light extraction blocks, are described, in which the light extraction blocks include various curved shapes that provide improved light extraction properties compared to parallel emissive surface, and a thinner form factor and better light extraction than a hemisphere. Lighting systems described herein may include a light source with an OLED panel. A light extraction block with a three-dimensional light emitting surface may be optically coupled to the light source. The three-dimensional light emitting surface of the block may includes a substantially curved surface, with further characteristics related to the curvature of the surface at given points. A first radius of curvature corresponding to a maximum principal curvature k.sub.1 at a point p on the substantially curved surface may be greater than a maximum height of the light extraction block. A maximum height of the light extraction block may be less than 50% of a maximum width of the light extraction block. Surfaces with cross sections made up of line segments and inflection points may also be fit to approximated curves for calculating the radius of curvature.

  12. Estimation of Uncertainties in Stage-Discharge Curve for an Experimental Himalayan Watershed

    NASA Astrophysics Data System (ADS)

    Kumar, V.; Sen, S.

    2016-12-01

    Various water resource projects developed on rivers originating from the Himalayan region, the "Water Tower of Asia", plays an important role on downstream development. Flow measurements at the desired river site are very critical for river engineers and hydrologists for water resources planning and management, flood forecasting, reservoir operation and flood inundation studies. However, an accurate discharge assessment of these mountainous rivers is costly, tedious and frequently dangerous to operators during flood events. Currently, in India, discharge estimation is linked to stage-discharge relationship known as rating curve. This relationship would be affected by a high degree of uncertainty. Estimating the uncertainty of rating curve remains a relevant challenge because it is not easy to parameterize. Main source of rating curve uncertainty are errors because of incorrect discharge measurement, variation in hydraulic conditions and depth measurement. In this study our objective is to obtain best parameters of rating curve that fit the limited record of observations and to estimate uncertainties at different depth obtained from rating curve. The rating curve parameters of standard power law are estimated for three different streams of Aglar watershed located in lesser Himalayas by maximum-likelihood estimator. Quantification of uncertainties in the developed rating curves is obtained from the estimate of variances and covariances of the rating curve parameters. Results showed that the uncertainties varied with catchment behavior with error varies between 0.006-1.831 m3/s. Discharge uncertainty in the Aglar watershed streams significantly depend on the extent of extrapolation outside the range of observed water levels. Extrapolation analysis confirmed that more than 15% for maximum discharges and 5% for minimum discharges are not strongly recommended for these mountainous gauging sites.

  13. Technology, Demographic Characteristics and E-Learning Acceptance: A Conceptual Model Based on Extended Technology Acceptance Model

    ERIC Educational Resources Information Center

    Tarhini, Ali; Elyas, Tariq; Akour, Mohammad Ali; Al-Salti, Zahran

    2016-01-01

    The main aim of this paper is to develop an amalgamated conceptual model of technology acceptance that explains how individual, social, cultural and organizational factors affect the students' acceptance and usage behaviour of the Web-based learning systems. More specifically, the proposed model extends the Technology Acceptance Model (TAM) to…

  14. Investigating Students' Acceptance of a Statistics Learning Platform Using Technology Acceptance Model

    ERIC Educational Resources Information Center

    Song, Yanjie; Kong, Siu-Cheung

    2017-01-01

    The study aims at investigating university students' acceptance of a statistics learning platform to support the learning of statistics in a blended learning context. Three kinds of digital resources, which are simulations, online videos, and online quizzes, were provided on the platform. Premised on the technology acceptance model, we adopted a…

  15. Determinants of debit cards acceptance: An empirical investigation

    NASA Astrophysics Data System (ADS)

    Ismail, Shafinar; Bakri, Mohamed Hariri; Zulkepli, Jafri; Adnan, Azimah; Azizi, Amsyar

    2014-12-01

    These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.

  16. LGBT Youth and Family Acceptance

    PubMed Central

    Katz-Wise, Sabra L.; Rosario, Margaret; Tsappis, Michael

    2016-01-01

    Summary In this article, we address theories of attachment and parental acceptance and rejection, and their implications for lesbian, gay, bisexual, and transgender (LGBT) youths’ identity and health. We also provide two clinical cases to illustrate the process of family acceptance of a transgender youth and a gender nonconforming youth who was neither a sexual minority nor transgender. Clinical implications of family acceptance and rejection of LGBT youth are discussed. PMID:27865331

  17. Dynamics of embedded curves by doubly-nonlocal reaction-diffusion systems

    NASA Astrophysics Data System (ADS)

    von Brecht, James H.; Blair, Ryan

    2017-11-01

    We study a class of nonlocal, energy-driven dynamical models that govern the motion of closed, embedded curves from both an energetic and dynamical perspective. Our energetic results provide a variety of ways to understand physically motivated energetic models in terms of more classical, combinatorial measures of complexity for embedded curves. This line of investigation culminates in a family of complexity bounds that relate a rather broad class of models to a generalized, or weighted, variant of the crossing number. Our dynamic results include global well-posedness of the associated partial differential equations, regularity of equilibria for these flows as well as a more detailed investigation of dynamics near such equilibria. Finally, we explore a few global dynamical properties of these models numerically.

  18. Patients’ acceptance of corticotomy-assisted orthodontics

    PubMed Central

    Zawawi, Khalid H

    2015-01-01

    Objective To study patients’ acceptance of corticotomy-assisted orthodontics as a treatment option. Methods Adult patients seeking orthodontic treatment were asked to complete two sets of questionnaires; the first set included questions about age, sex, and level of education and general questions about orthodontic treatment; and the second set was related to the corticotomy-assisted orthodontics. Before answering the corticotomy questions, a brief description of the clinical procedure was explained and photographs of an actual procedure were shown. Results A total of 150 subjects were approached and 129 (86%) agreed to answer the questionnaires (72 male and 57 female patients). Of these, only 3.1% did hear about corticotomy and 7.8% selected corticotomy instead of extraction. Fear from the surgery (53.2%) was the most frequent reason for not selecting corticotomy followed by fear from pain (36.9%). The acceptance of corticotomy between males and females was similar. No relationship was found between the level of education and prior knowledge of the procedure, P=0.857. Prior knowledge about corticotomy was not a factor in selecting it as a treatment option (P=0.556) to reduce the treatment time (P=0.427). Conclusion The acceptance of corticotomy-assisted orthodontics as a treatment option was low. Fear from the surgery was the main reason for not selecting it. The acceptance of corticotomy-assisted orthodontics was not related to patient’s level of education or sex. PMID:26316719

  19. Shoulder dystocia--malpractice or acceptable risk?

    PubMed

    Skolbekken, J A

    2000-09-01

    In 1988 a new patient insurance system was introduced in Norway. It was initially described as an 'objectified' system, similar to one based on the no-fault principle. Early doubts were raised about the system's status, as it contains rules stating that compensation will not be given if the medical intervention is adequate and the involved risk is acceptable. This study was undertaken to examine the practice of these rules. An archival study was performed on the 41 shoulder dystocia cases that had been closed in the decade from 1988-1997. These cases were selected as shoulder dystocia was found to be the obstetrical event most often leading to a decision on acceptable risk. The most common injury in these cases was Erb's palsy, but fatalities and brain injuries were also observed. Compensation was given in nine cases, whereas it was denied due to an acceptable medical risk in the remaining cases. Indications of inconsistency among the reached decisions were found, and judged to be a result of differences of opinion between expert witnesses on the adequacy of the obstetrical practice. Doubts are raised as to whether similar decisions are reached in similar cases. Shoulder dystocia may be an acceptable risk in the sense that it is hard to predict and prevent. Whether the consequences of such a risk should be compensated, remains a political and economical issue. Present thinking leads to decisions that create a divide between the lucky unlucky and the plainly unlucky.

  20. Approaches to acceptable risk

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Whipple, C

    Several alternative approaches to address the question {open_quotes}How safe is safe enough?{close_quotes} are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, inmore » a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made.« less