... plan pre-approved by the quality unit that ... sampling, assays, specific acceptance criteria, production equipment ... There are no unknown qualities at that step. ...
Center for Biologics Evaluation and Research (CBER)
... of single change in multiple locations operating under the ... Specific tests and validation protocols; Product acceptance ... data obtained from testing and validation: ...
... Percussion Primers ... Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise ...
DTIC Science & Technology
...CONTINUED) MARINE ENGINEERING GENERAL PROVISIONS Acceptance of Material and Piping Components ...based on the applicable material or fabrication specification...conforming to an acceptable material specification may,...
Code of Federal Regulations, 2010
Low-activity products will be in the form of soldified waste and optional matrix and filler materials enclosed in sealed metal boxes. Acceptance specifications limit the physical characteristics of the containers, the chemical and physical characteristics of the waste form and other materials that may be in the container, the waste ...
Energy Citations Database
The vitrification facility at West Valley, New York will be used to incorporate nuclear waste into a vitrified waste form. Waste Acceptance Preliminary Specifications (WAPS) will be used to determine the acceptability of the waste form product. These spec...
National Technical Information Service (NTIS)
Research and development in support of the DWPF began during the 1970's at the Savannah River Technology Center (formerly the Savannah River Laboratory). A large amount of data relevant to compliance with the Waste Acceptance Product Specifications (WAPS)...
The purpose of this effort was to demonstrate that the SFT technique, when adapted to a DWPF canister nozzle, is capable of detecting leaks not meeting the Waste Acceptance Product Specifications (WAPS) acceptance criterion.
...CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Thread for Personal Flotation Devices § 164.023-9 Samples submitted for acceptance. Application samples. A product sample submitted...
The Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) will convert the 130 million liters of high-level nuclear waste at SRS into stable borosilicate glass. Production of canistered waste forms by the DWPF is scheduled to begin well before submission of the license application for the first repository. The Department of Energy has defined waste ...
DOE Information Bridge
This specification provides installation, equipment performance, engineering production approval instructions and requirements for installation and testing of the AN/ARC-201A(V) Aircraft system and associated equipment in prototype and production model ai...
This document lays down test specifications for photovoltaic module control tests of the Commission of the European Communities which shall be applied by the Joint Research Center for the acceptance of prototype and production modules for pilot and demons...
The objective of this short report is to define a set of activities that should lead to a specification for a test that can be used as one of the acceptance criteria and as an indicator of acceptable long-term behavior in contact with water. Since the glass composition is not yet defined and is likely to change as the composition of ...
... We normally only require firms to set acceptance criteria for the attributes in the product specification that affect safety, efficacy and quality. ...
... drug substances, and drug products found in alternative compendia, specifically ... European Pharmacopoeia (EP): The official standards for medicines in Europe ...
Center for Drug Evaluation (CDER)
... PART II. PRODUCT CONFIGURATION AND ACCEPTANCE TEST REQUIREMENTS. PILOT DISTRIBUTION GROUP OA-8374(V)/UCC-4(V). ...
... GEMINI LAUNCH VEHICLE ACCEPTANCE SPECIFICATION 1.0 SCOPE ... acceptance criteria and requirements for the Gemini Launch Vehicle, ...
A safe, effective, and acceptable microbicide is needed in order to decisively impact the global AIDS pandemic. As such, microbicide acceptability research is of paramount importance. In order to best utilize limited financial resources and save precious development time, acceptability studies should be fully integrated into ...
PubMed Central
Five West Valley Nuclear Services (WVNS) high-level waste (HLW) canisters were impact tested during 1994 to demonstrate compliance with the drop test requirements of the Waste Acceptance Product Specifications. The specifications state that the canistered...
Specification 1.2 of the repository program's Waste Acceptance Preliminary Specifications requires that the DWPF estimate the radionuclide inventory, and provide the error of the estimate, for each waste type (assumed to be each sludge batch). The invento...
Reference herein to any specific commercial product, process, or service by trade name ... Acceptance of Low Temperature Co-Fired Ceramic (LTCC) is accelerating in RF ... The National Electronic Manufacturing Initiative (NEMI) reports that the ..... specific applications must be compatible with the high ...
NASA Website
-specific language DTE Development Tools Extensibility EATDD Executable acceptance test-driven development EMD to enable a bottom up development process. In executable acceptance test-driven development these artifacts erm�glichen. In Executable Acceptance Test-driven Development werden solche Artefakte in Form ...
E-print Network
The basis of the monoclonal antibody production methodology, some immunological concepts which are important for the understanding of what is a Monoclonal Antibody, its radioiodination and acceptance as receptor-specific radiopharmaceuticals in nuclear me...
A durability test, designated the Product Consistency Test (PCT), has been developed for DWPF glass in order to meet the requirements of the Waste Acceptance Preliminary Specifications (WAPS). The test is designed to provide confirmation of the consistenc...
incorporating high volumes of fly ash. Such data will be necessary for developing material specification for high-volume fly ash concrete for commercial production in order to provide a greater acceptance by potential users. One of the possible high-volume fly ash uses of concrete appears to be in construction
Preproduction data is presented as submitted for preproduction approval. Pilot production data is presented with distribution curves and yield factors for the run. A copy of the specification is presented. Photographs of the types of grids acceptable for ...
Drug product specifications are a critical element of a good control strategy. Parenteral microsphere products are complex dosage forms, requiring careful development of test methods and acceptance criteria for the specifications. In particular, the in vitro release test method and ...
PubMed
A new generation of Dimensional and Geometrical Product Specifications (GPS) and Verification standard system is based on both the Mathematical structure and the Metrology. To determine the eligibility of the product should be adapt to modern digital measuring instruments. But in mathematizating measurement when the geometric tolerance ...
NASA Astrophysics Data System (ADS)
... Accession Number : AD0261497. Title : THE NON-SPECIFIC ACCEPTANCE OF SKIN TRANSPLANTS BY RADIATION CHIMERAS. ...
... Accession Number : AD0404730. Title : GEMINI LAUNCH VEHICLE ACCEPTANCE SPECIFICATION. Corporate Author ...
This specification documents the gas tungsten arc (GTA) welding process and production weld acceptance criteria requirements for the MC4163. This document is written specifically to apply to the welds on the MC4163 and is not to be used as a general gas tungsten arc welding specification. All ...
A sample of Sludge Batch 5 (SB5) was pulled from Tank 40 in order to obtain radionuclide inventory analyses necessary for compliance with the Waste Acceptance Product Specifications (WAPS)1. This sample was also analyzed for chemical composition including...
The study was initiated by a request to feed 'volunteer' military services foods that are not only nutritious but acceptable. Specifically, beverages were singled out since they constitute products of processed fruit juices and fruit-flavored beverages of...
ACCEPTANCE TESTING, QUALITY ASSURANCE AND RISK MANAGEMENT; 10. ... Title. Location. Designation. MDS Project Implementation Plan ..... Prefer inspectable requirements and specifications to testable requirements .... Core team develops a technical approach that will be a basis for early plans, budgets and schedules . ...
The half-life of exp 26 Al has been redetermined because of suggestions of an error in the accepted value based on its use in calculating exp 21 Ne production rates from cosmic rays in meteorites. Two solutions of exp 26 Al were analyzed for the specific ...
A test is presented for compliance with Subpart 164.015. Specification for Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape. The foam tested was Type A sheet form. A description is given of the test procedures used and the results of the individ...
...name and address of each chemical supplier. Where the chemical composition or formula of a commercially...formulation of a fire-retardant chemical, or any other factor...qualification tests and must yield passing or acceptable...
A sample of Sludge Batch 4 (SB4) was pulled from Tank 40 in order to obtain radionuclide inventory analyses necessary for compliance with the Waste Acceptance Product Specifications (WAPS). This sample was also analyzed for elemental and chemical composit...
To achieve success in ship construction, it is necessary for the ship owner and the ship builder to agree on the level of quality in the final product. Classification rules, regulatory requirements, and ship specifications all help to define an acceptable...
... Title : An Analysis of the Extent to Which Humor is Accepted and Employed in the Workplace for the Enhancement of Productivity and Creativity. ...
The Nuclear Waste Policy Act of 1982 mandated that all high-level waste (HLW) be sent to a federal geologic repository for permanent disposal. DOE published the Environmental Assessment in 1982 which identified borosilicate glass as the chosen HLW form.{sup 1} In 1985 the Department of Energy instituted a Waste Acceptance Process to assure that DWPF glass waste forms would be ...
This guidance for industry provides the Agencys current thinking on how to evaluate out-of-specification (OOS) test results. For purposes of this document, the term OOS results includes all test results that fall outside the specifications or acceptance c...
The United States' first facility to immobilize high-level nuclear waste, the Defense Waste Processing Facility (DWPF), will soon begin integrated nonradioactive testing. An important objective of that testing is to demonstrate that the DWPF product will comply with specifications established by the Department of Energy's Office of ...
... incidence of part substitutions and counterfeit material ... the QAR has accepted the products offered, acceptance ... at the source to check the product for ...
... Accession Number : ADD444724. Title : Recycled Plastics Product Acceptance in the Construction Industry,. Corporate Author ...
... Accession Number : ADA031514. Title : Production Acceptance Test of Auxiliary Cargo Ramp for the CH-47( ) Helicopter. ...
Production-scale quantities of Orlon-filled diallyl phthalate (DAP) and asbestos-filled DAP have been prepared using an ortho-DAP prepolymer synthesized by Bendix-Kansas City. Processing of both production DAP batches was very similar to the processing as done on o-DAP prepolymer obtained from a previous supplier. The Mound production ...
Immobilization of high-level radioactive waste (HLW) in borosilicate glass is acknowledged world-wide as an acceptable method for preparing HLW for geologic disposal. A waste acceptance process is underway in the United States that will provide specifications and procedures for waste producers well in advance of the availability of a ...
... Title : Design Criteria and Preliminary Acceptance Test Specifications for Blast Resistant Windows. Corporate Author : NAVAL CIVIL ENGINEERING ...
The purpose of this calculation is to evaluate Wulfenstein fine aggregate for acceptability under ASTM C 33 standard specification.
The reasons pushing aircraft manufacturers towards new technologies and the acceptance of such technologies by regional airlines are considered. Some specifics of the commuter market with regard to this acceptance are described. Precise examples based on ...
The physics program and the requirements for large acceptance detectors in electromagnetic nuclear physics are discussed. As a specific example, the CEBAF Large Acceptance Spectrometer is presented.
Manufactured parts are designed with acceptance tolerances, i.e. deviations from ideal design conditions, due to unavoidable errors in the manufacturing process. It is necessary to measure and evaluate the manufactured part, compared to the nominal design, to determine whether the part meets design specifications. The scope of this research project is ...
The concept of acceptability involves a complex set of individual, couple and socio-cultural factors. Within a specific focus on microbicides, this article sets forth the relevant behavioral issues demanding attention as scientists and product developers strive to identify microbicides that will be used in a sustained, long-term ...
The DWPF is currently carrying out a Startup Test Program which will lead to radioactive operations in the facility. The objective of a significant portion of this program is to demonstrate that the DWPF can reliably make glass which satisfies DOE`s product specifications. This objective will be achieved through a series of integrated process campaigns ...
The DWPF is currently carrying out a Startup Test Program which will lead to radioactive operations in the facility. The objective of a significant portion of this program is to demonstrate that the DWPF can reliably make glass which satisfies DOE's product specifications. This objective will be achieved through a series of integrated process ...
This paper describes a method for deriving the maximum acceptable task completion time (specification limit) when information from existing user data, competitive products or contextual inquiries isn�t available. Spec limits can be �bootstrapped � from an existing set of usability data by using the times from the most satisfied ...
Iron-based metallic and oxide nanoparticles have been shown to have enhanced reactivity towards a variety of chemical species, including chlorinated hydrocarbons and reducible oxyanions, which frequently contaminate ground water at DOE and other government and industrial sites. Possibly of greater importance is the ability of these nanoparticles to select specific reaction ...
(Tendeng et al., 2003) and includes MvaT of P. aeruginosa, and TurA of Pseudomonas putida (Diggle et alThe Pseudomonas aeruginosa global regulator MvaT specifically binds to the ptxS upstream region Accepted 3 August 2004 Exotoxin A production in Pseudomonas aeruginosa is regulated positively
This Part II of a two-part specification establishes the requirements for manufacture and acceptance of the IFF Transponder prime item, Receiver/Transmitter, Radio RT-1063B/APX-101(V).
The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new standards and guidelines were adopted and recommended for ...
Construction of the nations's first facility to immobilize defense high-level nuclear waste, the Defense Waste Processing Facility (DWPF) at the Savannah River Plant, is scheduled to be completed soon. The Department of Energy's Office of Civilian Radioactive Waste Management (OCRWM) has set up a Waste Acceptance Process to provide reasonable assurance that ...
A slowdown in the growth rate of labor productivity in the US (productivity slowdown) is discussed in this review. The generally accepted reasons for the slowdown are presented. A theory of depletion vs obstacle in describing productivity slowdown is presented. Policy responses to problems of ...
In this document, the Nuclear Waste Treatment Program (NWTP) proposes an approach for demonstrating compliance with acceptance specifications. The proposed approach relies first on developing models of the process (vitrification) and product (waste form) to relate measurable process variables to the product ...
Chalk reservoirs are an exploration objective in parts of the North Sea and elsewhere but, because of their low permeability, usually require stimulation to produce economically. However, conventional stimulation methods frequently fail to give the expected improvement in productivity. Research has shown that this is due to certain specific properties of ...
Chalk reservoirs are an exploration objective in parts of the North Sea and elsewhere but, because of their low permeability, usually require stimulation to produce economically. However, conventional stimulation methods frequently fail to give the expected improvement in productivity. Research has shown that this is caused by certain specific properties ...
The Developmental Therapeutics Program of NCI operates an anti-cancer screening program for the benefit of the extramural research community. The program, which is operated at no cost to suppliers, accepts both natural and synthetic compounds from scientists in the academic and industrial communities worldwide. Entrance into this program is through a supplier-driven on-line ...
Cancer.gov
...false Application for acceptance for production inspections and tests: Coast Guard...APPROVAL OF EQUIPMENT AND MATERIALS Production Inspection and Tests of Approved Equipment...007-7 Application for acceptance for production inspections and tests: Coast...
...accept service of a subpoena demanding the production of records or testimony? 1251...EMPLOYEES RELATING TO AGENCY INFORMATION AND PRODUCTION OF RECORDS IN LEGAL PROCEEDINGS ...accept service of a subpoena demanding the production of records or testimony?...
... Affecting the Acceptability of Irradiation Sterilized Ground Beef Products and the Effects of Flavored Salts, Pepper, and Textured Soy Protein. ...
... Title : Evaluation of The Limit of Acceptable Damage for Leather Products Using Infrared Thermography,. Corporate Author : ...
The Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) will be the first production facility in the United States for the immobilization of high-level nuclear waste. Production of DWPF canistered wasteforms will begin prior to repository licensing, so decisions on facility startup will have to be made before the final decisions on ...
... THIN FILM CAPACITORS, ACCEPTANCE TESTS, PRODUCTION ENGINEERING, PROXIMITY FUZES, SULFONES, MOISTUREPROOFING. ...
The Defense Waste Processing Facility (DWPF) produced 55 canistered waste forms containing simulated waste glass during the four Waste Qualification campaigns of the DWPF Startup Test Program. Testing of the gas within the free volume of these canisters for dew point, internal gas pressure, and chemical composition was performed as part of a continuing effort to demonstrate compliance with the ...
This research sought to better understand the antecedents of consumers' perceptions of health and safety risks, and the relationship between the perceived risk of an option, and judgments about its acceptability. The specific objective was to build a model of risk perception and risky option acceptability for hazardous ...
This report presents the recommendations of an international group of experts convened by the World Health Organization to consider matters concerning the quality assurance of pharmaceuticals and specifications for drug substances and dosage forms. The report is complemented by a number of annexes. These include: guidance notes on related substances tests concerning the dosage ...
This Acceptance Test Report (ATR) documents the results of acceptance test procedure WHC-SD-WM-ATR-151. Included in this report is a summary of the tests, the results and issues, the signature and sign- off ATP pages, and a summarized table of the specification vs. ATP section that satisfied the specification.
The success of a new technology does not depend only on its technical and economic feasibility. Evidence from the diffusion of non-solar technologies suggests that unless the product can be accepted and integrated into existing institutional processes and practices and can meet specific user and technology delivery system requirements, ...
The versatile nickel cadmium battery design developed by Ford Aerospace and Communications for use on long life synchronous and elliptical orbiting satellites has been qualification, life, and acceptance tested in three configurations. The battery design, which is easily modified to incorporate any number of series cells, specific thermal control ...
A model focused on protege anxious attachment and feedback in mentoring relationships was tested with a sample of matched doctoral student proteges and their faculty mentors. Results show that protege anxious attachment was associated with less feedback seeking and less feedback acceptance. Protege feedback acceptance was associated with both the quality ...
ERIC Educational Resources Information Center
It has been found that the Metals Comparator can effectively measure the extent to which a bare uranium slug has been transformed to a beta heat-treated structure. The sensitivity and reliability of the method, as well as its simplicity and speed of performance, favor its use as a production test for routine inspection of bare slugs. The adjustments and conditions ...
A vitrification facility is being developed by the U.S. Department of Energy (DOE) at the West Valley Demonstration Plant (WVDP) near Buffalo, New York, where approximately 300 canisters of high-level nuclear waste glass will be produced. To assure that the produced waste form is acceptable, uncertainty must be managed. Statistical issues arise due to sampling, waste ...
An automated software tool has been developed and implemented to increase the efficiency and overall life-cycle productivity of site cleanup by scheduling vehicle and container movement between waste generators and disposal sites on the Department of Energy's Oak Ridge Reservation. The software tool identifies the best routes or accepts ...
The 9975 shipping package incorporates a cane fiberboard overpack for thermal insulation and impact resistance. Thermal properties (thermal conductivity and specific heat capacity) have been measured on cane fiberboard and a similar wood fiber-based product at several temperatures representing potential storage conditions. While the two ...
... (Author). Descriptors : *ARMY FACILITIES, *ENERGY CONSERVATION, ACCEPTANCE TESTS, CONTRACT ADMINISTRATION, SPECIFICATIONS ...
... this data based on criteria ... specifications of recommended modifications and ... AND CONTROL SYSTEMS, ACCEPTABILITY, QUESTIONNAIRES ...
The implementation of universal health coverage scheme in Thailand allows quality, equitable and accessible health care for all. Patients with life threatening and chronic diseases can get access to biotherapeutic products to treat their ailments. This triggered a major impact on the need for specific guidelines in evaluation of similar biotherapeutic ...
The Defense Waste Processing Facility (DWPF) at the Savannah River Site in Aiken, SC will immobilize high-level radioactive liquid waste, currently stored in underground carbon steel tanks, in borosilicate glass. The radioactive waste is transferred to the DWPF in two forms: precipitate slurry and sludge slurry. The radioactive waste is pretreated and then combined with a borosilicate glass frit ...
The report provides the results of a project whose aim was ascertaining the effectiveness of the Solar Box Cooker as an instrument for cooking and pasteurizing water, as well as, the degree to which it and its products are acceptable to the people of Sierra Leone. Specific Objectives were as follows: (1) To ascertain the extent of ...
Investigations concerned with the decontamination and reeovery of precious metals, resulted in considerable basic and applied information for the recovery of chemically and radiochemically pure Pt, Rh, lr, Pd, and Au. An economical production scale process was attained by the development of a continuous solvent extraction process which results in a ...
Software acceptance is a life cycle process which includes acceptance of interim and final software products for both new and maintained software systems. The guide assists buyers in understanding acceptance issues relative to a basic life cycle model and...
