Sample records for access industry profile

  1. The Energy Industry Profile of ISO/DIS 19115-1: Facilitating Discovery and Evaluation of, and Access to Distributed Information Resources

    NASA Astrophysics Data System (ADS)

    Hills, S. J.; Richard, S. M.; Doniger, A.; Danko, D. M.; Derenthal, L.; Energistics Metadata Work Group

    2011-12-01

    A diverse group of organizations representative of the international community involved in disciplines relevant to the upstream petroleum industry, - energy companies, - suppliers and publishers of information to the energy industry, - vendors of software applications used by the industry, - partner government and academic organizations, has engaged in the Energy Industry Metadata Standards Initiative. This Initiative envisions the use of standard metadata within the community to enable significant improvements in the efficiency with which users discover, evaluate, and access distributed information resources. The metadata standard needed to realize this vision is the initiative's primary deliverable. In addition to developing the metadata standard, the initiative is promoting its adoption to accelerate realization of the vision, and publishing metadata exemplars conformant with the standard. Implementation of the standard by community members, in the form of published metadata which document the information resources each organization manages, will allow use of tools requiring consistent metadata for efficient discovery and evaluation of, and access to, information resources. While metadata are expected to be widely accessible, access to associated information resources may be more constrained. The initiative is being conducting by Energistics' Metadata Work Group, in collaboration with the USGIN Project. Energistics is a global standards group in the oil and natural gas industry. The Work Group determined early in the initiative, based on input solicited from 40+ organizations and on an assessment of existing metadata standards, to develop the target metadata standard as a profile of a revised version of ISO 19115, formally the "Energy Industry Profile of ISO/DIS 19115-1 v1.0" (EIP). The Work Group is participating on the ISO/TC 211 project team responsible for the revision of ISO 19115, now ready for "Draft International Standard" (DIS) status. With ISO 19115 an

  2. Defence electronics industry profile, 1990-1991

    NASA Astrophysics Data System (ADS)

    The defense electronics industry profiled in this review comprises an estimated 150 Canadian companies that develop, manufacture, and repair radio and communications equipment, radars for surveillance and navigation, air traffic control systems, acoustic and infrared sensors, computers for navigation and fire control, signal processors and display units, special-purpose electronic components, and systems engineering and associated software. Canadian defense electronics companies generally serve market niches and end users of their products are limited to the military, government agencies, or commercial airlines. Geographically, the industry is concentrated in Ontario and Quebec, where about 91 percent of the industry's production and employment is found. In 1989, the estimated revenue of the industry was $2.36 billion, and exports totalled an estimated $1.4 billion. Strengths and weaknesses of the industry are discussed in terms of such factors as the relatively small size of Canadian companies, the ability of Canadian firms to access research and development opportunities and export markets in the United States, the dependence on foreign-made components, and international competition.

  3. GHGRP Industrial Profiles

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses. This page hosts data highlights for all sectors.

  4. GHGRP Minerals Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Minerals industry.

  5. GHGRP Refineries Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Refineries industry.

  6. GHGRP Chemicals Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Chemicals industry.

  7. GHGRP Metals Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Metals industry.

  8. GHGRP Power Plants Sector Industrial Profiles

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles, available for download below, contain detailed analyses for the Power Plants industry.

  9. GHGRP Electronics Manufacturing Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Electronics Manufacturing industry.

  10. GHGRP Miscellaneous Combustion Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Miscellaneous Combustion industry.

  11. Archive of GHGRP Refineries Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Refineries industry.

  12. Archive of GHGRP Chemicals Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Chemicals industry.

  13. GHGRP Pulp and Paper Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Pulp and Paper industry.

  14. The Computer Industry. High Technology Industries: Profiles and Outlooks.

    ERIC Educational Resources Information Center

    International Trade Administration (DOC), Washington, DC.

    A series of meetings was held to assess future problems in United States high technology, particularly in the fields of robotics, computers, semiconductors, and telecommunications. This report, which focuses on the computer industry, includes a profile of this industry and the papers presented by industry speakers during the meetings. The profile…

  15. Motor carrier industry profile study : financial and operating performance profiles by industry segment, 2001-2002.

    DOT National Transportation Integrated Search

    2004-09-01

    This report profiles the motor carrier industry and its significant operating segments. It is one of a series of reports analyzing various aspects of the motor carrier industry. Other reports in the series focus on the safety performance of the indus...

  16. Archive of GHGRP Power Plants Sector Industrial Profiles

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles, available for download below, contain detailed analyses for the Power Plants industry.

  17. Industrial Maintenance. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for industrial maintenance occupations. The list contains units (with and without subunits), competencies, and competency…

  18. Motor carrier industry profile : an update 2004-2005.

    DOT National Transportation Integrated Search

    2005-08-01

    This report updates the Motor Carrier Industry Profile: 2001-20031 and Stock Market Performance of Publicly Traded Trucking Sector Stocks by Industry Segment, 2000-20042 to reflect more recent developments of particular significance to the industry a...

  19. Forest Industry Worker. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for forest industry occupations. The list contains units (with and without subunits), competencies, and competency builders…

  20. Impacts on the Voltage Profile of DC Distribution Network with DG Access

    NASA Astrophysics Data System (ADS)

    Tu, J. J.; Yin, Z. D.

    2017-07-01

    With the development of electronic, more and more distributed generations (DGs) access into grid and cause the research fever of direct current (DC) distribution network. Considering distributed generation (DG) location and capacity have great impacts on voltage profile, so use IEEE9 and IEEE33 typical circuit as examples, with DGs access in centralized and decentralized mode, to compare voltage profile in alternating and direct current (AC/DC) distribution network. Introducing the voltage change ratio as an evaluation index, so gets the general results on voltage profile of DC distributed network with DG access. Simulation shows that, in the premise of reasonable location and capacity, DC distribution network is more suitable for DG access.

  1. Transparency of Biobank Access in Canada: An Assessment of Industry Access and the Availability of Information on Access Policies and Resulting Research.

    PubMed

    Gibson, Shannon G; Axler, Renata E; Lemmens, Trudo

    2017-12-01

    A key issue impacting public trust in biobanks is how these resources are utilized, including who is given access to biobank data and samples. To assess the conditions under which researchers are given access to Canadian biobanks, we reviewed websites and contacted Canadian biobanks to determine the availability of information on access policies and procedures; research resulting from access biobank data and samples; and conditions on private industry access to biobanks. We also conducted expert interviews with key Canadian stakeholders ( n = 11) to obtain their perspectives on biobank transparency and access policies. Among 21 Canadian biobanks, there was wide variation in the access information made publicly available, and the majority of these allowed access by industry applicants. Biobanks should be governed by the principles of transparency, accountability, and accessibility, and attention must be given to the conditions around the commercialization of biobank-based research.

  2. GHGRP Petroleum and Natural Gas Systems Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses for Petroleum and Natural Gas Systems.

  3. INDUSTRIAL PROCESS PROFILES FOR ENVIRONMENTAL USE: CHAPTER 30. THE ELECTRONIC COMPONENT MANUFACTURING INDUSTRY

    EPA Science Inventory

    This report is one of a series constituting the catalog of Industrial Process Profiles for Environmental Use. Each industry sector is addressed as a separate chapter of the study. The catalog was developed for the purpose of compiling relevant information concerning air, water, a...

  4. Agricultural/Industrial Mechanical Technician. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for agricultural/industrial mechanical technician occupations. The list contains units (with and without subunits),…

  5. Modeling track access charge to enhance railway industry performance

    NASA Astrophysics Data System (ADS)

    Berawi, Mohammed Ali; Miraj, Perdana; Berawi, Abdur Rohim Boy; Susantono, Bambang; Leviakangas, Pekka; Radiansyah, Hendra

    2017-11-01

    Indonesia attempts to improve nation's competitiveness by increasing the quality and the availability of railway network. However, the infrastructure improperly managed by the operator in terms of the technical issue. One of the reasons for this problem is an unbalanced value of infrastructure charge. In 2000's track access charge and infrastructure maintenance and operation for Indonesia railways are equal and despite current formula of the infrastructure charge, issues of transparency and accountability still in question. This research aims to produce an alternative scheme of track access charge by considering marginal cost plus markup (MC+) approach. The research combines qualitative and quantitative method through an in-depth interview and financial analysis. The result will generate alternative formula of infrastructure charge in Indonesia's railway industry. The simulation also conducted to estimate track access charge for the operator and to forecast government support in terms of subsidy. The result is expected to enhance railway industry performance and competitiveness.

  6. A national profile of the U.S. hardwood sawmill industry

    Treesearch

    Scott Bowe; Robert Smith; Philip A. Araman

    2001-01-01

    A nationwide survey of the hardwood sawmill industry was conducted in the fall of 1999. The objectives of the survey were to generate a current demographic profile of the hardwood sawmill industry and identify the preferred information sources for the hardwood sawmill industry. These objectives were chosen because timely information was not available for the hardwood...

  7. Archive of GHGRP Petroleum and Natural Gas Systems Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses for Petroleum and Natural Gas Systems.

  8. 75 FR 1053 - Access to Confidential Business Information by Industrial Economics, Incorporated

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-08

    ... Industrial Economics, Incorporated AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Access to Data and Request for Comments. SUMMARY: EPA will authorize its contractor, Industrial Economics... Contracts No. EP-W-6-065 and EP07H000213, Industrial Economics, Incorporated (IEc) will assist the Office of...

  9. 75 FR 70235 - Access to Confidential Business Information by Industrial Economics, Incorporated

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-17

    ... Industrial Economics, Incorporated AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Access to Data and Request for Comments. SUMMARY: EPA will authorize its contractor, Industrial Economics... Contracts Nos. GS-10F-0061N (EP10H000898) and EP-W-06- 065/0013, Industrial Economics, Incorporated (IEc...

  10. After Access: Divergent Learning Profiles in Vietnam and India

    ERIC Educational Resources Information Center

    Rolleston, Caine; James, Zoe

    2015-01-01

    In recent decades, both India and Vietnam have successfully expanded access to schooling to near-universal levels and have shifted their focus to quality-oriented policy reform. Yet, international and national evidence shows strongly contrasting learning profiles for children within the two systems. Simple indicators of numeracy suggest similar…

  11. GHGRP Natural Gas and Natural Gas Liquids Suppliers Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Natural Gas and Natural Gas Suppliers indust

  12. 77 FR 10753 - Draft Guidance for Industry: Food and Drug Administration Records Access Authority Under the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-23

    ...] Draft Guidance for Industry: Food and Drug Administration Records Access Authority Under the Federal... industry entitled ``FDA Records Access Authority Under Sections 414 and 704 of the Federal Food, Drug...). This updated draft guidance is intended to provide individuals in the human and animal food industries...

  13. Railroad industry modal profile: an outline of the railroad industry workforce trends, challenges, and opportunities - update : final report.

    DOT National Transportation Integrated Search

    2016-04-01

    In 2011, the Federal Railroad Administration (FRA) Office of Research, Development, and Technology (RD&T) published the : first edition of the Railroad Industry Modal Profile: An Outline of the Railroad Industry Workforce Trends, Challenges, and :...

  14. Natural Resources. Ohio's Competency Analysis Profile. Forest Industry Worker. Resource Conservation.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This competency analysis profile lists 155 competencies that have been identified by employers as core competencies for inclusion in programs to train forest industry and resource conservation workers. The core competencies are organized into 10 units dealing the following: general safety precautions, natural resource industry operations, soil…

  15. A threat intelligence framework for access control security in the oil industry

    NASA Astrophysics Data System (ADS)

    Alaskandrani, Faisal T.

    The research investigates the problem raised by the rapid development in the technology industry giving security concerns in facilities built by the energy industry containing diverse platforms. The difficulty of continuous updates to network security architecture and assessment gave rise to the need to use threat intelligence frameworks to better assess and address networks security issues. Focusing on access control security to the ICS and SCADA systems that is being utilized to carry out mission critical and life threatening operations. The research evaluates different threat intelligence frameworks that can be implemented in the industry seeking the most suitable and applicable one that address the issue and provide more security measures. The validity of the result is limited to the same environment that was researched as well as the technologies being utilized. The research concludes that it is possible to utilize a Threat Intelligence framework to prioritize security in Access Control Measures in the Oil Industry.

  16. Profiles of Automotive Suppliers Industries--Engineered Mechanical Components and Systems : Volume II, Appendices.

    DOT National Transportation Integrated Search

    1981-09-01

    The profile describes and analyzes that segment of the automotive supplier industry which provides engineered mechanical components/assemblies/systems to the prime auto manufacturers. It presents an overview of the role and structure of this industry...

  17. JASPAR 2014: an extensively expanded and updated open-access database of transcription factor binding profiles.

    PubMed

    Mathelier, Anthony; Zhao, Xiaobei; Zhang, Allen W; Parcy, François; Worsley-Hunt, Rebecca; Arenillas, David J; Buchman, Sorana; Chen, Chih-yu; Chou, Alice; Ienasescu, Hans; Lim, Jonathan; Shyr, Casper; Tan, Ge; Zhou, Michelle; Lenhard, Boris; Sandelin, Albin; Wasserman, Wyeth W

    2014-01-01

    JASPAR (http://jaspar.genereg.net) is the largest open-access database of matrix-based nucleotide profiles describing the binding preference of transcription factors from multiple species. The fifth major release greatly expands the heart of JASPAR-the JASPAR CORE subcollection, which contains curated, non-redundant profiles-with 135 new curated profiles (74 in vertebrates, 8 in Drosophila melanogaster, 10 in Caenorhabditis elegans and 43 in Arabidopsis thaliana; a 30% increase in total) and 43 older updated profiles (36 in vertebrates, 3 in D. melanogaster and 4 in A. thaliana; a 9% update in total). The new and updated profiles are mainly derived from published chromatin immunoprecipitation-seq experimental datasets. In addition, the web interface has been enhanced with advanced capabilities in browsing, searching and subsetting. Finally, the new JASPAR release is accompanied by a new BioPython package, a new R tool package and a new R/Bioconductor data package to facilitate access for both manual and automated methods.

  18. BARTER: Behavior Profile Exchange for Behavior-Based Admission and Access Control in MANETs

    NASA Astrophysics Data System (ADS)

    Frias-Martinez, Vanessa; Stolfo, Salvatore J.; Keromytis, Angelos D.

    Mobile Ad-hoc Networks (MANETs) are very dynamic networks with devices continuously entering and leaving the group. The highly dynamic nature of MANETs renders the manual creation and update of policies associated with the initial incorporation of devices to the MANET (admission control) as well as with anomaly detection during communications among members (access control) a very difficult task. In this paper, we present BARTER, a mechanism that automatically creates and updates admission and access control policies for MANETs based on behavior profiles. BARTER is an adaptation for fully distributed environments of our previously introduced BB-NAC mechanism for NAC technologies. Rather than relying on a centralized NAC enforcer, MANET members initially exchange their behavior profiles and compute individual local definitions of normal network behavior. During admission or access control, each member issues an individual decision based on its definition of normalcy. Individual decisions are then aggregated via a threshold cryptographic infrastructure that requires an agreement among a fixed amount of MANET members to change the status of the network. We present experimental results using content and volumetric behavior profiles computed from the ENRON dataset. In particular, we show that the mechanism achieves true rejection rates of 95% with false rejection rates of 9%.

  19. JASPAR 2014: an extensively expanded and updated open-access database of transcription factor binding profiles

    PubMed Central

    Mathelier, Anthony; Zhao, Xiaobei; Zhang, Allen W.; Parcy, François; Worsley-Hunt, Rebecca; Arenillas, David J.; Buchman, Sorana; Chen, Chih-yu; Chou, Alice; Ienasescu, Hans; Lim, Jonathan; Shyr, Casper; Tan, Ge; Zhou, Michelle; Lenhard, Boris; Sandelin, Albin; Wasserman, Wyeth W.

    2014-01-01

    JASPAR (http://jaspar.genereg.net) is the largest open-access database of matrix-based nucleotide profiles describing the binding preference of transcription factors from multiple species. The fifth major release greatly expands the heart of JASPAR—the JASPAR CORE subcollection, which contains curated, non-redundant profiles—with 135 new curated profiles (74 in vertebrates, 8 in Drosophila melanogaster, 10 in Caenorhabditis elegans and 43 in Arabidopsis thaliana; a 30% increase in total) and 43 older updated profiles (36 in vertebrates, 3 in D. melanogaster and 4 in A. thaliana; a 9% update in total). The new and updated profiles are mainly derived from published chromatin immunoprecipitation-seq experimental datasets. In addition, the web interface has been enhanced with advanced capabilities in browsing, searching and subsetting. Finally, the new JASPAR release is accompanied by a new BioPython package, a new R tool package and a new R/Bioconductor data package to facilitate access for both manual and automated methods. PMID:24194598

  20. Access Protocol For An Industrial Optical Fibre LAN

    NASA Astrophysics Data System (ADS)

    Senior, John M.; Walker, William M.; Ryley, Alan

    1987-09-01

    A structure for OSI levels 1 and 2 of a local area network suitable for use in a variety of industrial environments is reported. It is intended that the LAN will utilise optical fibre technology at the physical level and a hybrid of dynamically optimisable token passing and CSMA/CD techniques at the data link (IEEE 802 medium access control - logical link control) level. An intelligent token passing algorithm is employed which dynamically allocates tokens according to the known upper limits on the requirements of each device. In addition a system of stochastic tokens is used to increase efficiency when the stochastic traffic is significant. The protocol also allows user-defined priority systems to be employed and is suitable for distributed or centralised implementation. The results of computer simulated performance characteristics for the protocol using a star-ring topology are reported which demonstrate its ability to perform efficiently with the device and traffic loads anticipated within an industrial environment.

  1. Facilitating Oil Industry Access to Federal Lands through Interagency Data Sharing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Paul Jehn; Ben Grunewald

    Much of the environmental and technical data useful to the oil and gas industry and regulatory agencies is now contained in disparate state and federal databases. Delays in coordinating permit approvals between federal and state agencies translate into increased operational costs and stresses for the oil and gas industry. Making federal lease stipulation and area restriction data available on state agency Web sites will streamline a potential lessors review of available leases, encourage more active bidding on unleased federal lands, and give third-party operators independent access to data who otherwise may not have access to lease restrictions and other environmentalmore » data. As a requirement of the Energy Policy Conservation Act (EPCA), the Bureau of Land Management (BLM) is in the process of inventorying oil and natural gas resources beneath onshore federal lands and the extent and nature of any stipulation, restrictions, or impediments to the development of these resources. The EPCA Phase 1 Inventory resulted in a collection of GIS coverage files organized according to numerous lease stipulation reference codes. Meanwhile, state agencies also collect millions of data elements concerning oil and gas operations. Much of the oil and gas data nationwide is catalogued in the Ground Water Protection Council's (GWPC's) successfully completed Risk Based Data Management System (RBDMS). The GWPC and the states of Colorado, New Mexico, Utah, and Montana are implementing a pilot project where BLM lease stipulation data and RBDMS data will be displayed in a GIS format on the Internet. This increased access to data will increase bid activity, help expedite permitting, and encourage exploration on federal lands. Linking environmental, lease stipulation and resource inventory assessment data and making a GIS interface for the data available to industry and other agencies via the internet represents an important step in the GWPC strategy for all oil and gas regulatory e

  2. Physician access to drug profiles to reduce adverse reactions

    NASA Astrophysics Data System (ADS)

    Yasnoff, William A.; Tomkins, Edward L.; Dunn, Louise M.

    1995-10-01

    Adverse drug reactions (ADRs) are a major source of preventable morbidity and mortality, especially among the elderly, who use more drugs and are more sensitive to them. The insurance industry has recently addressed this problem through the implementation of drug interaction alerts to pharmacists in conjunction with immediate online claims adjudication for almost 60% of prescriptions (expected to reach 90% within 5 years). These alerts are based on stored patient drug profiles maintained by pharmacy benefit managers (PBMs) which are updated whenever prescriptions are filled. While these alerts are very helpful, the pharmacist does not prescribe, resulting in time-consuming and costly delays to contact the physician and remedy potential interactions. We have developed and demonstrated the feasibility of the PINPOINT (Pharmaceutical Information Network for prevention of interactions) system for making the drug profile and interaction information easily available to the physician before the prescription is written. We plan to test the cost-effectiveness of the system in a prospective controlled clinical trial.

  3. Profile Change When Industry Moves Into an Area. Working Paper RID 73.7.

    ERIC Educational Resources Information Center

    Scott, John T., Jr.

    The effects of industrialization on the economic and social profile of a rural community are described in this paper. Some of the major changes when industry moves into a community are in the land use and support systems such as an increase in the demand for water, energy, and waste disposal. Other changes are in the labor force, retail sales and…

  4. Characteristics of white, yellow, purple corn accessions: phenolic profile, textural, rheological properties and muffin making potential.

    PubMed

    Trehan, Shalini; Singh, Narpinder; Kaur, Amritpal

    2018-06-01

    Physicochemical, antioxidant, phenolic profile and muffin-making properties of white, yellow and purple corn accessions were evaluated. HPLC analysis revealed the presence of ferulic acid, quercetin, sinapic acid, gallic acid and protocatechuic acid in different corn accessions. Ferulic acid was the major phenolic acid present in all accessions. Total phenolic content (TPC), DPPH and ABTS inhibition ranged from 903 to 1843 µg GAE/g, 0.73-0.89 and 3.81-4.92 µM trolox/mg, respectively. Purple accessions had higher TPC than yellow and white accessions. Pasting profiles of different accessions revealed high thermal stability indicated by low breakdown viscosity. Muffin-making properties were determined as batter rheology and muffin specific volume, texture and sensory analysis. Storage modulus ( G ') and loss modulus ( G ″) of batters for white colored exhibited the highest while yellow colored had the lowest value. Firmness and TPC of muffins ranged from 3.1 to 5.9 N and 811-1406 µg GAE/g, respectively. Muffin cohesiveness and chewiness were correlated positively, whereas firmness was negatively related to paste viscosities. Antioxidant activity was correlated to phenolic content of the muffins. Sensory analysis revealed that muffins prepared from yellow corn accession (IC447648) were highly acceptable, while those made from purple corn (IC447644) were not liked much.

  5. New drug regulations in France: what are the impacts on market access? Part 2 – impacts on market access and impacts for the pharmaceutical industry

    PubMed Central

    Rémuzat, Cécile; Toumi, Mondher; Falissard, Bruno

    2013-01-01

    Access to the French drug market is being impacted by an ongoing dramatic shift in practice as well as by two laws that came into force in December 2011. This new environment has been described and analyzed in two separate articles. This second article analyzes how this new environment will actually impact the access to French drug market. French drug market access will be increasingly driven by comparative-effectiveness and cost-effectiveness data, and an increased role of postmarketing studies in the years to come. This access is evolving in a more complex environment for stakeholders due to the uncertainties surrounding these changes and it will be more complex and difficult for the pharmaceutical industry to address. The main issue faced by the pharmaceutical companies will be to minimize uncertainty at the time of a drug's launch to narrow the decision window. This is a major change of paradigm for the pharmaceutical business, in which pre- and postlaunch risks are directed toward the pharmaceutical industry. PMID:27226829

  6. Health profile of workers in a ship building and repair industry.

    PubMed

    Lokhande, Vaishali R

    2014-05-01

    The modern ship building industry, which encompasses the ship yards and marine equipment manufacturing, is an important and strategic industry. The various activities in modern ship building, maintenance, and repair have to be carried out at heights, or in closed confined spaces along with the added risk of exposure to chemicals and metal fumes. These activities expose the workers to various health hazards. This study was carried out with an aim to assess the health profile of workers in the ship building industry and to assess the occupational health issues related to ship building. It was a cross-sectional study carried out on 100 randomly selected workers in a ship building yard in Mumbai, and their health profile was studied. The workers were enquired for history of co-morbidities, addictions and personal protective equipment use, health-related complaints, and were examined systemically as well as for bedside tests for hearing and detailed systemic examination as per the history or co-morbidity. The important observations were those of prevalence of addictions (69%), irregular use of personal protective equipments (PPEs) among 50% of paint workers, presence of hypertension (20%), overweight (53%), osteoarthritis (10%), hearing loss (25%), and poor self-care. Health education to the workers regarding occupational hazards and lifestyle diseases along with more emphasis on the use of PPEs with regular health examination needs reinforcement.

  7. JASPAR 2016: a major expansion and update of the open-access database of transcription factor binding profiles

    PubMed Central

    Mathelier, Anthony; Fornes, Oriol; Arenillas, David J.; Chen, Chih-yu; Denay, Grégoire; Lee, Jessica; Shi, Wenqiang; Shyr, Casper; Tan, Ge; Worsley-Hunt, Rebecca; Zhang, Allen W.; Parcy, François; Lenhard, Boris; Sandelin, Albin; Wasserman, Wyeth W.

    2016-01-01

    JASPAR (http://jaspar.genereg.net) is an open-access database storing curated, non-redundant transcription factor (TF) binding profiles representing transcription factor binding preferences as position frequency matrices for multiple species in six taxonomic groups. For this 2016 release, we expanded the JASPAR CORE collection with 494 new TF binding profiles (315 in vertebrates, 11 in nematodes, 3 in insects, 1 in fungi and 164 in plants) and updated 59 profiles (58 in vertebrates and 1 in fungi). The introduced profiles represent an 83% expansion and 10% update when compared to the previous release. We updated the structural annotation of the TF DNA binding domains (DBDs) following a published hierarchical structural classification. In addition, we introduced 130 transcription factor flexible models trained on ChIP-seq data for vertebrates, which capture dinucleotide dependencies within TF binding sites. This new JASPAR release is accompanied by a new web tool to infer JASPAR TF binding profiles recognized by a given TF protein sequence. Moreover, we provide the users with a Ruby module complementing the JASPAR API to ease programmatic access and use of the JASPAR collection of profiles. Finally, we provide the JASPAR2016 R/Bioconductor data package with the data of this release. PMID:26531826

  8. Profiles of Automotive Suppliers Industries--Engineered Mechanical Components and Systems : Volume I, Text.

    DOT National Transportation Integrated Search

    1981-09-01

    This profile describes and analyzes that segment of the automotive supplier industry which provides engineered mechanical components/assemblies/systems to the prime auto manufacturers. It presents an overview of the role and structure of this industr...

  9. Assessment of the vaccine industry in Iran in context of accession to WTO: a survey study

    PubMed Central

    2012-01-01

    Background The vaccine industry is one of the most important health-related industries. It can be affected by accession to the World Trade Organization (WTO) because of probable dramatic changes in the business environment. Iran has already initiated accession negotiations. Purpose of the study In this paper, we investigate the position of, challenges to, and opportunities for vaccine manufacturing in Iran with regard to accession to the WTO. Methods This is a qualitative and cross sectional study. To collect information, we designed a questionnaire and interviewed some of the vaccine industry’s key opinion leaders in Iran. Before the interviews were conducted, the questionnaires were sent to these individuals by email. Results According to the interviewees, the country’s main challenges with regard to accession to the WTO are the lack of firm internal intellectual property (IP) rules, not being recognized as pre-qualified by the World Health Organization (WHO), the use of old equipment, and a lack of cooperation with global vaccine companies. Major conclusions Iran’s local vaccine industry, with a long history and international reputation that could be used as an advantage, is faced with several challenges, such as problems with keeping up with Current Good Manufacturing Practice (cGMP), a lack of adequate and meaningful investment in research and development (R&D), and limitations on private sector participation in the production of vaccines. Gradual privatization of the industry, improved international relations, utilization of the R&D power of small hi-tech companies, consistent education of human resources, and modernization of infrastructures and equipment are among the suggested solutions. PMID:23351841

  10. Industry Profiles 1958-1966.

    ERIC Educational Resources Information Center

    Business and Defense Services Administration (DOC), Washington, DC.

    A statistical picture is provided of economic developments in each of 417 manufacturing industries during the years 1958-66. The document consists of: (1) an introduction which describes the source and organization of the data and explains the terminology used, (2) industry descriptions which define each of the industries included, (3) industry…

  11. JASPAR 2010: the greatly expanded open-access database of transcription factor binding profiles

    PubMed Central

    Portales-Casamar, Elodie; Thongjuea, Supat; Kwon, Andrew T.; Arenillas, David; Zhao, Xiaobei; Valen, Eivind; Yusuf, Dimas; Lenhard, Boris; Wasserman, Wyeth W.; Sandelin, Albin

    2010-01-01

    JASPAR (http://jaspar.genereg.net) is the leading open-access database of matrix profiles describing the DNA-binding patterns of transcription factors (TFs) and other proteins interacting with DNA in a sequence-specific manner. Its fourth major release is the largest expansion of the core database to date: the database now holds 457 non-redundant, curated profiles. The new entries include the first batch of profiles derived from ChIP-seq and ChIP-chip whole-genome binding experiments, and 177 yeast TF binding profiles. The introduction of a yeast division brings the convenience of JASPAR to an active research community. As binding models are refined by newer data, the JASPAR database now uses versioning of matrices: in this release, 12% of the older models were updated to improved versions. Classification of TF families has been improved by adopting a new DNA-binding domain nomenclature. A curated catalog of mammalian TFs is provided, extending the use of the JASPAR profiles to additional TFs belonging to the same structural family. The changes in the database set the system ready for more rapid acquisition of new high-throughput data sources. Additionally, three new special collections provide matrix profile data produced by recent alternative high-throughput approaches. PMID:19906716

  12. JASPAR 2016: a major expansion and update of the open-access database of transcription factor binding profiles.

    PubMed

    Mathelier, Anthony; Fornes, Oriol; Arenillas, David J; Chen, Chih-Yu; Denay, Grégoire; Lee, Jessica; Shi, Wenqiang; Shyr, Casper; Tan, Ge; Worsley-Hunt, Rebecca; Zhang, Allen W; Parcy, François; Lenhard, Boris; Sandelin, Albin; Wasserman, Wyeth W

    2016-01-04

    JASPAR (http://jaspar.genereg.net) is an open-access database storing curated, non-redundant transcription factor (TF) binding profiles representing transcription factor binding preferences as position frequency matrices for multiple species in six taxonomic groups. For this 2016 release, we expanded the JASPAR CORE collection with 494 new TF binding profiles (315 in vertebrates, 11 in nematodes, 3 in insects, 1 in fungi and 164 in plants) and updated 59 profiles (58 in vertebrates and 1 in fungi). The introduced profiles represent an 83% expansion and 10% update when compared to the previous release. We updated the structural annotation of the TF DNA binding domains (DBDs) following a published hierarchical structural classification. In addition, we introduced 130 transcription factor flexible models trained on ChIP-seq data for vertebrates, which capture dinucleotide dependencies within TF binding sites. This new JASPAR release is accompanied by a new web tool to infer JASPAR TF binding profiles recognized by a given TF protein sequence. Moreover, we provide the users with a Ruby module complementing the JASPAR API to ease programmatic access and use of the JASPAR collection of profiles. Finally, we provide the JASPAR2016 R/Bioconductor data package with the data of this release. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

  13. Description, accessibility and usage of SOIR/Venus Express atmospheric profiles of Venus distributed in VESPA (Virtual European Solar and Planetary Access)

    NASA Astrophysics Data System (ADS)

    Trompet, L.; Geunes, Y.; Ooms, T.; Mahieux, A.; Wilquet, V.; Chamberlain, S.; Robert, S.; Thomas, I. R.; Erard, S.; Cecconi, B.; Le Sidaner, P.; Vandaele, A. C.

    2018-01-01

    Venus Express SOIR profiles of pressure, temperature and number densities of different constituents of the mesosphere and lower thermosphere of Venus are the only experimental data covering the 60 km to 220 km range of altitudes at the terminator of Venus. This unique dataset is now available in the open access VESPA infrastructure. This paper describes the content of these data products and provides some use cases.

  14. Non-contact data access with direction identification for industrial differential serial bus

    NASA Astrophysics Data System (ADS)

    Xie, Kai; Li, Xiaoping; Zhang, Hanlu; Yang, Ming; Ye, Yinghao

    2013-06-01

    We propose a non-contact method for accessing data in industrial differential serial bus applications, which could serve as an effective and safe online testing and diagnosing tool. The data stream and the transmission direction are reconstructed simultaneously from the near-field emanations of a twisted pair, eliminating direct contact with the actual conductors, and avoiding damage to the insulation (only the outer sheathing is removed). A non-contact probe with the ability to sense electric and magnetic fields is presented, as are theories for data reconstruction, direction identification, and a circuit implementation. The prototype was built using inexpensive components and then tested on a standard RS-485 industrial serial bus. Experimental results verified the validity of the proposed scheme.

  15. Latent profile analysis of lifestyle characteristics and health risk behaviors among Koreans who have completed industrial accident care.

    PubMed

    Choi, Wan-Suk; Moon, Ok-Kon; Yeum, Dong-Moon

    2017-10-07

    This study investigated the characteristics and health behavior profiles of 1,803 workers who had experienced industrial accidents. Average weekly exercise days, average number of cigarettes smoked per day, average daily sleep duration, and number of days of alcohol consumption were selected to investigate health behavior profiles. Specifically, latent profile analysis was applied to identify the health behavior profiles of people who had completed industrial accident care; the latent classes were the health-conscious type (n=240), the potential-risk type (n=850), and the high-risk type (n=713). Comparison of the health-conscious and potential-risk types indicated that younger subjects, the employed, and those with lower social status and life satisfaction were more likely to be the potential-risk type. Comparison of the health-conscious and high-risk types revealed that males, younger subjects, the employed, those without chronic illnesses, and those with lower social status and life satisfaction were more likely to be the high-risk type. The results suggest that industrial accident victims who have completed accident care have different health behaviors and it is necessary to improve health promotion based on health type characteristics.

  16. Industrial sector-based volatile organic compound (VOC) source profiles measured in manufacturing facilities in the Pearl River Delta, China.

    PubMed

    Zheng, Junyu; Yu, Yufan; Mo, Ziwei; Zhang, Zhou; Wang, Xinming; Yin, Shasha; Peng, Kang; Yang, Yang; Feng, Xiaoqiong; Cai, Huihua

    2013-07-01

    Industrial sector-based VOC source profiles are reported for the Pearl River Delta (PRD) region, China, based source samples (stack emissions and fugitive emissions) analyzed from sources operating under normal conditions. The industrial sectors considered are printing (letterpress, offset and gravure printing processes), wood furniture coating, shoemaking, paint manufacturing and metal surface coating. More than 250 VOC species were detected following US EPA methods TO-14 and TO-15. The results indicated that benzene and toluene were the major species associated with letterpress printing, while ethyl acetate and isopropyl alcohol were the most abundant compounds of other two printing processes. Acetone and 2-butanone were the major species observed in the shoemaking sector. The source profile patterns were found to be similar for the paint manufacturing, wood furniture coating, and metal surface coating sectors, with aromatics being the most abundant group and oxygenated VOCs (OVOCs) as the second largest contributor in the profiles. While OVOCs were one of the most significant VOC groups detected in these five industrial sectors in the PRD region, they have not been reported in most other source profile studies. Such comparisons with other studies show that there are differences in source profiles for different regions or countries, indicating the importance of developing local source profiles. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.

  17. Transcriptome profiling of Kentucky bluegrass (Poa pratensis L.) accessions in response to salt stress.

    PubMed

    Bushman, B Shaun; Amundsen, Keenan L; Warnke, Scott E; Robins, Joseph G; Johnson, Paul G

    2016-01-13

    Kentucky bluegrass (Poa pratensis L.) is a prominent turfgrass in the cool-season regions, but it is sensitive to salt stress. Previously, a relatively salt tolerant Kentucky bluegrass accession was identified that maintained green colour under consistent salt applications. In this study, a transcriptome study between the tolerant (PI 372742) accession and a salt susceptible (PI 368233) accession was conducted, under control and salt treatments, and in shoot and root tissues. Sample replicates grouped tightly by tissue and treatment, and fewer differentially expressed transcripts were detected in the tolerant PI 372742 samples compared to the susceptible PI 368233 samples, and in root tissues compared to shoot tissues. A de novo assembly resulted in 388,764 transcripts, with 36,587 detected as differentially expressed. Approximately 75 % of transcripts had homology based annotations, with several differences in GO terms enriched between the PI 368233 and PI 372742 samples. Gene expression profiling identified salt-responsive gene families that were consistently down-regulated in PI 372742 and unlikely to contribute to salt tolerance in Kentucky bluegrass. Gene expression profiling also identified sets of transcripts relating to transcription factors, ion and water transport genes, and oxidation-reduction process genes with likely roles in salt tolerance. The transcript assembly represents the first such assembly in the highly polyploidy, facultative apomictic Kentucky bluegrass. The transcripts identified provide genetic information on how this plant responds to and tolerates salt stress in both shoot and root tissues, and can be used for further genetic testing and introgression.

  18. Coarse particle (PM10-2.5) source profiles for emissions from domestic cooking and industrial process in Central India.

    PubMed

    Bano, Shahina; Pervez, Shamsh; Chow, Judith C; Matawle, Jeevan Lal; Watson, John G; Sahu, Rakesh Kumar; Srivastava, Anjali; Tiwari, Suresh; Pervez, Yasmeen Fatima; Deb, Manas Kanti

    2018-06-15

    To develop coarse particle (PM 10-2.5 , 2.5 to 10μm) chemical source profiles, real-world source sampling from four domestic cooking and seven industrial processing facilities were carried out in "Raipur-Bhilai" of Central India. Collected samples were analysed for 32 chemical species including 21 elements (Al, As, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, Pb, S, Sb, Se, V, and Zn) by atomic absorption spectrophotometry (AAS), 8 water-soluble ions (Na + , K + , Mg 2+ , Ca 2+ , Cl - , F - , NO 3 - , and SO 4 2- ) by ion chromatography, ammonium (NH 4 + ) by spectrophotometry, and carbonaceous fractions (OC and EC) by thermal/optical transmittance. The carbonaceous fractions were most abundant fraction in household fuel and municipal solid waste combustion emissions while elemental species were more abundant in industrial emissions. Most of the elemental species were enriched in PM 2.5 (<2.5μm) size fraction as compared to the PM 10-2.5 fraction. Abundant Ca (13-28%) was found in steel-rolling mill (SRM) and cement production industry (CPI) emissions, with abundant Fe (14-32%) in ferro-manganese (FEMNI), steel production industry (SPI), and electric-arc welding emissions. High coefficients of divergence (COD) values (0.46 to 0.88) among the profiles indicate their differences. These region-specific source profiles are more relevant to source apportionment studies in India than profiles measured elsewhere. Copyright © 2018. Published by Elsevier B.V.

  19. Wall Street and the Pentagon: Defense Industry Access to Capital Markets, 1990-2010. An Annotated Brief

    DTIC Science & Technology

    2011-11-01

    understand the relationship between defense spending and the financial metrics that drive access to ? and cost of ? capital for defense firms . This paper...decisionmakers understand the  relationship between defense spending and the  financial  metrics that drive access to – and cost of –  capital for defense  firms ...to access capital markets also reflects industry leaders’ concerns. In a  newspaper interview, the chief  financial  officer of a large private  firm

  20. 76 FR 46853 - JLG Industries, Inc., Access Segment, a Subsidiary of Oshkosh Corporation, Including On-Site...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-03

    ... supplied by the workers and confirmed by JLG Industries, Inc. revealed that the Hagerstown, Maryland facility operated in conjunction with JLG-McConnellsburg in the production of access equipment and supplied design engineering, global procurement supply chain, safety, and reliability services used in the...

  1. 76 FR 43352 - JLG Industries, Inc., Access Segment, a Subsidiary of Oshkosh Corporation, Including On-Site...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-20

    ... supplied by the workers and confirmed by JLG Industries, Inc. revealed that the Hagerstown, Maryland facility operated in conjunction with JLG-McConnellsburg in the production of access equipment and supplied design engineering, global procurement supply chain, safety, and reliability services used in the...

  2. Applications of aerospace technology in industry: A technology transfer profile, nondestructive testing

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The development of nondestructive testing procedures by NASA and the transfer of nondestructive testing to technology to civilian industry are discussed. The subjects presented are: (1) an overview of the nondestructive testing field, (2) NASA contributions to the field of nondestructive testing, (3) dissemination of NASA contributions, and (4) a transfer profile. Attachments are included which provide a brief description of common nondestructive testing methods and summarize the technology transfer reports involving NASA generated nondestructive testing technology.

  3. Greenhouse gas and carbon profile of the U.S. forest products industry value chain

    Treesearch

    Linda S. Heath; Van Maltby; Reid Miner; Kenneth E. Skog; James E. Smith; Jay Unwin; Brad Upton

    2010-01-01

    A greenhouse gas and carbon accounting profile was developed for the U.S. forest products industry value chain for 1990 and 2004-2005 by examining net atmospheric fluxes of CO2 and other greenhouse gases (GHGs) using a variety of methods and data sources. Major GHG emission sources include direct and indirect (from purchased electricity...

  4. Building Bridges: A Critical Analysis of University-Industry Collaboration to Improve Diverse Access to Elite Professions

    ERIC Educational Resources Information Center

    Dickinson, Jill; Griffiths, Teri-Lisa

    2017-01-01

    This article explores how universities and industry can work together to improve access to graduate opportunities for disadvantaged students. Focusing on an initiative which involved students from a "post-1992" UK university experiencing London's legal sector, the article analyses the factors that contributed to the students' perceptions…

  5. GENE EXPRESSION PROFILING OF ACCESSIBLE SURROGATE TISSUES TO MONITOR MOLECULAR CHANGES IN INACCESSIBLE TARGET TISSUES FOLLOWING TOXICANT EXPOSURE

    EPA Science Inventory

    Gene Expression Profiling Of Accessible Surrogate Tissues To Monitor Molecular Changes In Inaccessible Target Tissues Following Toxicant Exposure
    John C. Rockett, Chad R. Blystone, Amber K. Goetz, Rachel N. Murrell, Judith E. Schmid and David J. Dix
    Reproductive Toxicology ...

  6. The effects of New York's bypass surgery provider profiling on access to care and patient outcomes in the elderly.

    PubMed

    Peterson, E D; DeLong, E R; Jollis, J G; Muhlbaier, L H; Mark, D B

    1998-10-01

    The aim of this study was to examine the effects of provider profiling on bypass surgery access and outcomes in elderly patients in New York. Since 1989, New York (NY) has compiled provider-specific bypass surgery mortality reports. While some have proposed that "provider profiling" has led to lower surgical mortality rates, critics have suggested that such programs lower in-state procedural access (increasing out-of-state transfers) without improving patient outcomes. Using national Medicare data, we examined trends in the percentages of NY residents aged 65 years or older receiving out-of-state bypass surgery between 1987 and 1992 (before and after program initiation). We also examined in-state procedure use among elderly myocardial infarction patients during this period. Finally, we compared trends in surgical outcomes in NY Medicare patients with those for the rest of the nation. Between 1987 and 1992, the percentage of NY residents receiving bypass out-of-state actually declined (from 12.5% to 11.3%, p < 0.01 for trend). An elderly patient's likelihood for bypass following myocardial infarction in NY increased significantly since the program's initiation. Between 1987 and 1992, unadjusted 30-day mortality rates following bypass declined by 33% in NY Medicare patients compared with a 19% decline nationwide (p < 0.001). As a result of this improvement, NY had the lowest risk-adjusted bypass mortality rate of any state in 1992. We found no evidence that NY's provider profiling limited procedure access in NY's elderly or increased out-of-state transfers. Despite an increasing preoperative risk profile, procedural outcomes in NY improved significantly faster than the national average.

  7. Space and biotechnology: An industry profile

    NASA Technical Reports Server (NTRS)

    Johnston, Richard S.; Norton, David J.; Tom, Baldwin H.

    1988-01-01

    The results of a study conducted by the Center for Space and Advanced Technology (CSAT) for NASA-JSC are presented. The objectives were to determine the interests and attitudes of the U.S. biotechnology industry toward space biotechnology and to prepare a concise review of the current activities of the biotechnology industry. In order to accomplish these objectives, two primary actions were taken. First, a questionnaire was designed, reviewed, and distributed to U.S. biotechnology companies. Second, reviews of the various biotechnology fields were prepared in several aspects of the industry. For each review, leading figures in the field were asked to prepare a brief review pointing out key trends and current industry technical problems. The result is a readable narrative of the biotechnology industry which will provide space scientists and engineers valuable clues as to where the space environment can be explored to advance the U.S. biotechnology industry.

  8. 78 FR 38994 - Implanted Blood Access Devices for Hemodialysis; Draft Guidance for Industry and Food and Drug...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-28

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-D-0749] Implanted Blood Access Devices for Hemodialysis; Draft Guidance for Industry and Food and Drug Administration Staff; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food...

  9. Job and industry classifications associated with sarcoidosis in A Case-Control Etiologic Study of Sarcoidosis (ACCESS).

    PubMed

    Barnard, Juliana; Rose, Cecile; Newman, Lee; Canner, Martha; Martyny, John; McCammon, Chuck; Bresnitz, Eddy; Rossman, Milt; Thompson, Bruce; Rybicki, Benjamin; Weinberger, Steven E; Moller, David R; McLennan, Geoffrey; Hunninghake, Gary; DePalo, Louis; Baughman, Robert P; Iannuzzi, Michael C; Judson, Marc A; Knatterud, Genell L; Teirstein, Alvin S; Yeager, Henry; Johns, Carol J; Rabin, David L; Cherniack, Reuben

    2005-03-01

    To determine whether specific occupations and industries may be associated with sarcoidosis. A Case Control Etiologic Study of Sarcoidosis (ACCESS) obtained occupational and environmental histories on 706 newly diagnosed sarcoidosis cases and matched controls. We used Standard Industrial Classification (SIC) and Standard Occupational Classification (SOC) to assess occupational contributions to sarcoidosis risk. Univariable analysis identified elevated risk of sarcoidosis for workers with industrial organic dust exposures, especially in Caucasian workers. Workers for suppliers of building materials, hardware, and gardening materials were at an increased risk of sarcoidosis as were educators. Work providing childcare was negatively associated with sarcoidosis risk. Jobs with metal dust or metal fume exposures were negatively associated with sarcoidosis risk, especially in Caucasian workers. In this study, we found that exposures in particular occupational settings may contribute to sarcoidosis risk.

  10. Respecting the right to access to medicines: Implications of the UN Guiding Principles on Business and Human Rights for the pharmaceutical industry.

    PubMed

    Moon, Suerie

    2013-06-14

    What are the human rights responsibilities of pharmaceutical companies with regard to access to medicines? The state-based international human rights framework has long struggled with the issue of the human rights obligations of non-state actors, a question sharpened by economic globalization and the concomitant growing power of private for-profit actors ("business"). In 2011, after a six-year development process, the UN Human Rights Council unanimously endorsed the Guiding Principles advanced by the UN Secretary General's Special Representative on Business and Human Rights, John Ruggie. The Ruggie Principles sought to clarify and differentiate the responsibilities of states and non-state actors-in this case, "business" -with respect to human rights. The framework centered on "three core principles: the state duty to protect against human rights abuses by third parties, including business; the corporate responsibility to respect human rights; and the need for more effective access to remedies." The "Protect, Respect, and Remedy" Framework emerged from a review of many industrial sectors operating from local to global scales, in many regions of the world, and involving multiple stakeholder consultations. However, their implications for the pharmaceutical industry regarding access to medicines remain unclear. This article analyzes the 2008 Human Rights Guidelines for Pharmaceutical Companies in relation to Access to Medicines advanced by then-UN Special Rapporteur on the Right to Health, Paul Hunt, in light of the Ruggie Principles. It concludes that some guidelines relate directly to the industry's responsibility to respect the right to access to medicines, and form a normative baseline to which firms should be held accountable. It also finds that responsibility for other guidelines may better be ascribed to states than to private actors, based on conceptual and practical considerations. While not discouraging the pharmaceutical industry from making additional

  11. A risk microbiological profile of the Australian red meat industry: risk ratings of hazard-product pairings.

    PubMed

    Sumner, John; Ross, Tom; Jenson, Ian; Pointon, Andrew

    2005-11-25

    A risk profile of microbial hazards across the supply continuum for the beef, sheep and goat meat industries was developed using both a qualitative tool and a semi-quantitative, spreadsheet tool, Risk Ranger. The latter is useful for highlighting factors contributing to food safety risk and for ranking the risk of various product/pathogen combinations. In the present profile the qualitative tool was used as a preliminary screen for a wide range of hazard-product pairings while Risk Ranger was used to rank in order of population health risk pairings for which quantitative data were available and for assessing the effect of hypothetical scenarios. 'High' risk hazard-product pairings identified were meals contaminated with Clostridium perfringens provided by caterers which have not implemented HACCP; kebabs cross-contaminated by Salmonella present in drip trays or served undercooked; meals served in the home cross-contaminated with Salmonella. 'Medium' risk hazard-product pairings identified were ready-to-eat meats contaminated with Listeria monocytogenes and which have extended shelf life; Uncooked Comminuted Fermented Meat (UCFM)/Salami contaminated with Enterohaemorrhagic E. coli (EHEC) and Salmonella; undercooked hamburgers contaminated with EHEC; kebabs contaminated by Salmonella under normal production or following final "flash" heating. Identified 'low' risk hazard-product pairings included cooked, ready-to-eat sausages contaminated with Salmonella; UCFM/Salami contaminated with L. monocytogenes; well-cooked hamburgers contaminated with EHEC. The risk profile provides information of value to Australia's risk managers in the regulatory, processing and R&D sectors of the meat and meat processing industry for the purposes of identifying food safety risks in the industry and for prioritising risk management actions.

  12. Hexabromocyclododecanes (HBCDDs) in surface soils from coastal cities in North China: Correlation between diastereoisomer profiles and industrial activities.

    PubMed

    Zhang, Yueqing; Li, Qifeng; Lu, Yonglong; Jones, Kevin; Sweetman, Andrew J

    2016-04-01

    Hexabromocyclododecane (HBCDD) is a brominated flame retardant with a wide range of industrial applications, although little is known about its patterns of spatial distribution in soils in relation to industrial emissions. This study has undertaken a large-scale investigation around an industrialized coastal area of China, exploring the concentrations, spatial distribution and diastereoisomer profiles of HBCDD in 188 surface soils from 21 coastal cities in North China. The detection frequency was 100% and concentrations of total HBCDD in the surface soils ranged from 0.123 to 363 ng g(-1) and averaged 7.20 ng g(-1), showing its ubiquitous existence at low levels. The spatial distribution of HBCDD exhibited a correlation with the location of known manufacturing facilities in Weifang, suggesting the production of HBCDD as major emission source. Diastereoisomer profiles varied in different cities. Diastereoisomer compositions in soils were compared with emissions from HBCDD industrial activities, and correlations were found between them, which has the potential for source identification. Although the contemporary concentrations of HBCDD in soils from the study were relatively low, HBCDD-containing products (expanded/extruded polystyrene insulation boards) would be a potential source after its service life, and attention needs to be paid to prioritizing large-scale waste management efforts. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Changing Occupational Profiles in the Hotel Industry: Case Studies in France, Italy and Spain. Synthesis Report.

    ERIC Educational Resources Information Center

    Gatti, Mario; Grazia Mereu, Maria; Tagliaferro, Claudio

    Changing occupational profiles in the hotel industry in France, Italy, and Spain were examined in case studies that included interviews with hotel managers, human resource managers, and individuals employed in hotel occupations identified as new or entailing new skills. The study focused on the following topics: (1) changes in the hotel industry…

  14. Profile of ocular trauma in industries-related hospital.

    PubMed

    Shashikala, P; Sadiqulla, Mohammed; Shivakumar, D; Prakash, K H

    2013-05-01

    Ocular trauma is a worldwide cause of visual morbidity, a significant proportion of which occurs in the industrial workplace and includes a spectrum of simple ocular surface foreign bodies, abrasions to devastating perforating injuries causing blindness. Being preventable is of social and medical concern. A prospective case series study, to know the profile of ocular trauma at a hospital caters exclusively to factory employees and their families, to co-relate their demographic and clinical profile and to identify the risk factors. Patients with ocular trauma who presented at ESIC Model hospital, Rajajinagar, Bangalore, from June 2010 to May 2011 were taken a detailed demographic data, nature and cause of injury, time interval between the time of injury and presentation along with any treatment received. Ocular evaluation including visual acuity, anterior and posterior segment findings, intra-ocular pressure and gonio-scopy in closed globe injuries, X-rays for intraocular foreign body, B-scan and CT scan were done. Data analyzed as per the ocular trauma classification group. The rehabilitation undertaken medically or surgically was analyzed. At follow-up, the final best corrected visual acuity was noted. A total of 306 cases of ocular trauma were reported; predominantly in 20-40 year age group (72.2%) and in men (75%). The work place related cases were 50.7%and of these, fall of foreign bodies led the list. Visual prognosis was poorer in road traffic accidents rather than work place injuries owing to higher occurrence of open globe injuries and optic neuropathy. Finally, 11% of injured cases ended up with poor vision. Targeting groups most at risk, providing effective eye protection, and developing workplace safety cultures may together reduce occupational eye injuries.

  15. Principal component analysis of TOF-SIMS spectra, images and depth profiles: an industrial perspective

    NASA Astrophysics Data System (ADS)

    Pacholski, Michaeleen L.

    2004-06-01

    Principal component analysis (PCA) has been successfully applied to time-of-flight secondary ion mass spectrometry (TOF-SIMS) spectra, images and depth profiles. Although SIMS spectral data sets can be small (in comparison to datasets typically discussed in literature from other analytical techniques such as gas or liquid chromatography), each spectrum has thousands of ions resulting in what can be a difficult comparison of samples. Analysis of industrially-derived samples means the identity of most surface species are unknown a priori and samples must be analyzed rapidly to satisfy customer demands. PCA enables rapid assessment of spectral differences (or lack there of) between samples and identification of chemically different areas on sample surfaces for images. Depth profile analysis helps define interfaces and identify low-level components in the system.

  16. Industry Perspectives on Market Access of Innovative Drugs: The Relevance for Oncology Drugs.

    PubMed

    Pauwels, Kim; Huys, Isabelle; Casteels, Minne; Simoens, Steven

    2016-01-01

    Key Points - Representatives of the pharmaceutical industry call for a broader recognition of value within the assessment and appraisal of innovative drugs- Focus on value within the assessment and appraisal of drugs is jeopardized by financial drives as the side of industry and at the side of the payers- A well-considered value-framework, with attention for patient reported outcomes, societal preferences and dynamic approach on the drug life cycle, needs to be incorporated in assessment and appraisal at national and European level in order to coordinate the views of different stakeholders and allow efficient resource allocation This study presents industry perspectives on the challenges related to market access of innovative drugs in general and oncology drugs in specific. Fifteen interviews were conducted with representatives of pharmaceutical companies and industry associations. Interviewees call for a broader recognition of value within the assessment and appraisal of drugs. According to interviewees, focus on value is jeopardized by the lack of a common value definition across Europe, poor availability and validity of value measures and cost-saving measures such as external reference price setting and cost-effectiveness analysis at the side of the payers. Centralized assessment of relative-effectiveness at European level would provide a common value estimate across member states, independent of financial drivers. Empirical evidence on PRO and societal preferences is however essential in the development of a value definition. Furthermore, value-based pricing would imply a dynamic approach where the price is differentiated across indications and across the lifecycle of the drug, especially in fields such as oncology. Financial drivers however also threat the application of value-based pricing at the side of the industry, making value-based profitability a more appropriate term.

  17. Automotive Refinishing Industry: Isocyanates Profile

    EPA Pesticide Factsheets

    The isocyanates profile document is part of the DfE Auto Refinishing Shop Project and is intended to provide information on refinishing, control technologies, and regulatory status regarding isocyanate compounds

  18. Chemical profile of size-fractionated soils collected in a semiarid industrial area of Argentina

    NASA Astrophysics Data System (ADS)

    Morales Del Mastro, Anabella; Pereyra, Marcelo; Londonio, Agustín; Pereyra, Victoria; Rebagliati, Raúl Jiménez; Dawidowski, Laura; Gómez, Darío; Smichowski, Patricia

    2014-12-01

    A study was undertaken to assess the chemical profile of soil collected in Bahía Blanca (Argentina). In this industrial city, semiarid soils are affected by different industrial and agricultural activities, the presence of a saltpeter extraction facility, traffic and increasing urbanization. Sixteen soil samples (superficial and sub-superficial) were collected. Samples were sieved in two fractions (A < 37 μm, and 37 < B < 50 μm) before elemental analysis. Major, minor and trace elements namely, Al, As, Ba, Ca, Cd, Cr, Cu, Fe, Mg, Mn, Mo, Ni, Pb, Sb, Ti, V and Zn were determined by inductively coupled plasma optical emission spectrometry (ICP OES). Anions (Cl-, F-, SO42-) and cations (K+, Na+ and NH4+) were determined by high performance liquid chromatography (HPLC) after an aqueous extraction. As expected, crustal elements namely, Al, Ca, Fe, Mg and Ti exhibited the highest concentrations. Mean elemental concentration ranged from <0.3 μg g-1 (Sb) to 14.6 ± 0.6% (Ca). Ions concentrations in the soluble fraction measured at mg g-1 levels were in the order Cl- > Na+ ≅ SO42- > K+ > NO3-. Three indicators, namely, (i) coefficient of variation, (ii) coefficient of divergence and (iii) ratio of elemental concentration with respect to Ca were used to assess chemical, spatial and inter-profile variability. Chloride > Ca > Na+ > Mo > SO42-, dominated the variability indicating that these are key chemical markers for future assessment of crustal contribution to airborne particles in the area. The ratios Xi/Ca allowed discriminating the soil of the semi-arid region surrounding Bahía Blanca. The chemical profiles obtained in this study, particularly those of topsoil, will be a key input to characterize soil resuspension and its contribution to airborne particulate matter in a forthcoming receptor model analysis.

  19. Open-Access Mega-Journals: A Bibliometric Profile.

    PubMed

    Wakeling, Simon; Willett, Peter; Creaser, Claire; Fry, Jenny; Pinfield, Stephen; Spezi, Valérie

    2016-01-01

    In this paper we present the first comprehensive bibliometric analysis of eleven open-access mega-journals (OAMJs). OAMJs are a relatively recent phenomenon, and have been characterised as having four key characteristics: large size; broad disciplinary scope; a Gold-OA business model; and a peer-review policy that seeks to determine only the scientific soundness of the research rather than evaluate the novelty or significance of the work. Our investigation focuses on four key modes of analysis: journal outputs (the number of articles published and changes in output over time); OAMJ author characteristics (nationalities and institutional affiliations); subject areas (the disciplinary scope of OAMJs, and variations in sub-disciplinary output); and citation profiles (the citation distributions of each OAMJ, and the impact of citing journals). We found that while the total output of the eleven mega-journals grew by 14.9% between 2014 and 2015, this growth is largely attributable to the increased output of Scientific Reports and Medicine. We also found substantial variation in the geographical distribution of authors. Several journals have a relatively high proportion of Chinese authors, and we suggest this may be linked to these journals' high Journal Impact Factors (JIFs). The mega-journals were also found to vary in subject scope, with several journals publishing disproportionately high numbers of articles in certain sub-disciplines. Our citation analsysis offers support for Björk & Catani's suggestion that OAMJs's citation distributions can be similar to those of traditional journals, while noting considerable variation in citation rates across the eleven titles. We conclude that while the OAMJ term is useful as a means of grouping journals which share a set of key characteristics, there is no such thing as a "typical" mega-journal, and we suggest several areas for additional research that might help us better understand the current and future role of OAMJs in

  20. Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

    ERIC Educational Resources Information Center

    Mid-East Ohio Tech Prep Consortium, Zanesville.

    This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

  1. Metabolic Profile of the Cellulolytic Industrial Actinomycete Thermobifida fusca

    PubMed Central

    Vanee, Niti

    2017-01-01

    Actinomycetes have a long history of being the source of numerous valuable natural products and medicinals. To expedite product discovery and optimization of biochemical production, high-throughput technologies can now be used to screen the library of compounds present (or produced) at a given time in an organism. This not only facilitates chemical product screening, but also provides a comprehensive methodology to the study cellular metabolic networks to inform cellular engineering. Here, we present some of the first metabolomic data of the industrial cellulolytic actinomycete Thermobifida fusca generated using LC-MS/MS. The underlying objective of conducting global metabolite profiling was to gain better insight on the innate capabilities of T. fusca, with a long-term goal of facilitating T. fusca-based bioprocesses. The T. fusca metabolome was characterized for growth on two cellulose-relevant carbon sources, cellobiose and Avicel. Furthermore, the comprehensive list of measured metabolites was computationally integrated into a metabolic model of T. fusca, to study metabolic shifts in the network flux associated with carbohydrate and amino acid metabolism. PMID:29137138

  2. Advanced access: reducing waiting and delays in primary care.

    PubMed

    Murray, Mark; Berwick, Donald M

    2003-02-26

    Delay of care is a persistent and undesirable feature of current health care systems. Although delay seems to be inevitable and linked to resource limitations, it often is neither. Rather, it is usually the result of unplanned, irrational scheduling and resource allocation. Application of queuing theory and principles of industrial engineering, adapted appropriately to clinical settings, can reduce delay substantially, even in small practices, without requiring additional resources. One model, sometimes referred to as advanced access, has increasingly been shown to reduce waiting times in primary care. The core principle of advanced access is that patients calling to schedule a physician visit are offered an appointment the same day. Advanced access is not sustainable if patient demand for appointments is permanently greater than physician capacity to offer appointments. Six elements of advanced access are important in its application balancing supply and demand, reducing backlog, reducing the variety of appointment types, developing contingency plans for unusual circumstances, working to adjust demand profiles, and increasing the availability of bottleneck resources. Although these principles are powerful, they are counter to deeply held beliefs and established practices in health care organizations. Adopting these principles requires strong leadership investment and support.

  3. 49 CFR 8.31 - Industrial security.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Industrial security. 8.31 Section 8.31.../ACCESS Access to Information § 8.31 Industrial security. (a) Background. The National Industrial Security... classified pursuant to Executive Order 12356 of April 2, 1982, National Security Information, or its...

  4. 49 CFR 8.31 - Industrial security.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Industrial security. 8.31 Section 8.31.../ACCESS Access to Information § 8.31 Industrial security. (a) Background. The National Industrial Security... classified pursuant to Executive Order 12356 of April 2, 1982, National Security Information, or its...

  5. Evaluation of Standards for Access Control Enabling PHR-S Federation.

    PubMed

    Mense, Alexander; Urbauer, Philipp; Sauermann, Stefan

    2017-01-01

    The adoption of the Internet of Things (IoT) and mobile applications in the healthcare may transform the healthcare industry by offering better disease tracking and management as well as patient empowerment. Unfortunately, almost all of these new systems set up their own ecosystem and to be really valuable for the care process they need to be integrated or federated with user managed access control services based on international standards and profiles to enable interoperability. Thus, this work presents the results of an evaluation of available specifications for federated authorization, based on a set of basic requirements.

  6. Mask Industry Assessment: 2011

    NASA Astrophysics Data System (ADS)

    Chan, Y. David

    2011-11-01

    A survey supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the tenth in the current series of annual reports. With ongoing industry support, the report has been used as one of the baselines to gain perspective on the technical and business status of the mask and microelectronics industries. It continues to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was essentially the same as the 2005 through 2010 surveys. Questions are grouped into following categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

  7. Mask Industry Assessment: 2010

    NASA Astrophysics Data System (ADS)

    Hughes, Greg; Chan, David Y.

    2010-09-01

    A survey created supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the ninth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. It will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was basically the same as the 2005 through 2009 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

  8. Formatting modifications in GRADE evidence profiles improved guideline panelists comprehension and accessibility to information. A randomized trial.

    PubMed

    Vandvik, Per Olav; Santesso, Nancy; Akl, Elie A; You, John; Mulla, Sohail; Spencer, Frederick A; Johnston, Bradley C; Brozek, Jan; Kreis, Julia; Brandt, Linn; Zhou, Qi; Schünemann, Holger J; Guyatt, Gordon

    2012-07-01

    To determine the effects of formatting alternatives in Grading of Recommendations Assessment, Development, and Evaluation (GRADE) evidence profiles on guideline panelists' preferences, comprehension, and accessibility. We randomized 116 antithrombotic therapy guideline panelists to review one of two table formats with four formatting alternatives. After answering relevant questions, panelists reviewed the other format and reported their preferences for specific formatting alternatives. Panelists (88 of 116 invited [76%]) preferred presentation of study event rates over no study event rates (median 1 [interquartile range (IQR) 1] on 1-7 scale), absolute risk differences over absolute risks (median 2 [IQR 3]), and additional information in table cells over footnotes (median 1 [IQR 2]). Panelists presented with time frame information in the tables, and not only in footnotes, were more likely to correctly answer questions regarding time frame (58% vs. 11%, P<0.0001), and those presented with risk differences and not absolute risks were more likely to correctly interpret confidence intervals for absolute effects (95% vs. 54%, P<0.0001). Information was considered easy to find, easy to comprehend, and helpful in making recommendations regardless of table format (median 6, IQR 0-1). Panelists found information in GRADE evidence profiles accessible. Correct comprehension of some key information was improved by providing additional information in table and presenting risk differences. Copyright © 2012 Elsevier Inc. All rights reserved.

  9. Underage access to online alcohol marketing content: a YouTube case study.

    PubMed

    Barry, Adam E; Johnson, Emily; Rabre, Alexander; Darville, Gabrielle; Donovan, Kristin M; Efunbumi, Orisatalabi

    2015-01-01

    With the proliferation of the Internet and online social media use, alcohol advertisers are now marketing their products through social media sites such as YouTube, Facebook and Twitter. As a result, new recommendations have been made by the Federal Trade Commission concerning the self-regulation of digital marketing strategies, including content management on social and digital media sites. The current study sought to determine whether alcohol companies were implementing the self-imposed mandates that they have developed for online marketing. Specifically, we examined whether alcohol companies were implementing effective strategies that would prevent persons under the minimum legal drinking age in the USA from accessing their content on YouTube. We assessed 16 alcohol brands (beer and liquor) associated with the highest prevalence of past 30 day underage alcohol consumption in the USA. Fictitious YouTube user profiles were created and assigned the ages of 14, 17 and 19. These profiles then attempted to access and view the brewer-sponsored YouTube channels for each of the 16 selected brands. Every underage profile, regardless of age, was able to successfully subscribe to each of the 16 (100%) official YouTube channels. On average, two-thirds of the brands' channels were successfully viewed (66.67%). Alcohol industry provided online marketing content is predominantly accessible to underage adolescents. Thus, brewers are not following some of the self-developed and self-imposed mandates for online advertising by failing to implement effective age-restriction measures (i.e. age gates). © The Author 2014. Medical Council on Alcohol and Oxford University Press. All rights reserved.

  10. Can the generic antiretroviral industry support access to a universal antiretroviral regimen?

    PubMed

    Amole, Carolyn D; Middlecote, Caroline; Prabhu, Vineet R; Kumarasamy, N

    2017-07-01

    The generic antiretroviral (ARV) industry played a critical role in the massive scale-up of HIV treatment in low-income and middle-income countries since 2000. As the global community looks ahead to a universal antiretroviral regimen, this article considers the industry's role in supporting universal access to affordable, simpler, more durable, and tolerable HIV treatment regimens. Generic manufacturers made treatment scale-up in low-income and middle-income countries possible through reducing prices, combining molecules from different originator companies to develop optimal fixed-dose combinations, and investing in production capacity to meet escalating demand. Achieving scale-up of a universal regimen will require continued partnership in these areas. Collaboration on the demand and supply sides of the ARV marketplace will be required to foster a healthy and sustainable marketplace for new regimens. This includes clear priority setting from the global treatment community on priority products; predictable demand; regulatory prioritization of optimal products; effective tendering and procurement practices that enable multiple suppliers to participate in the market; coordinated product introduction efforts between Ministries of Health, partners, and civil society; and transparency from both buyers and suppliers to promote and monitor supply security. New regimens will benefit people living with HIV, as well as buyers and generic suppliers, by maximizing existing production capacity and treatment budgets to reach the 90-90-90 goals.

  11. 1D profiling using highly dispersive guided waves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Volker, Arno; Zon, Tim van; Enthoven, Daniel

    2015-03-31

    Corrosion is one of the industries major issues regarding the integrity of assets. Currently inspections are conducted at regular intervals to ensure a sufficient integrity level of these assets. Cost reduction while maintaining a high level of reliability and safety of installations is a major challenge. There are many situations where the actual defect location is not accessible, e.g., a pipe support or a partially buried pipe. Guided wave tomography has been developed to reconstruct the wall thickness. In case of bottom of the line corrosion, i.e., a single corrosion pit, a simpler approach may be followed. Data is collectedmore » in a pit-catch configuration at the 12 o'clock position using highly dispersive guided waves. The phase spectrum is used to invert for a wall thickness profile in the circumferential direction, assuming a Gaussian defect profile. An EMAT sensor design has been made to measure at the 12 o'clock position of a pipe. The concept is evaluated on measured data, showing good sizing capabilities on a variety simple defect profiles.« less

  12. Relationship between human resource ability and market access capacity on business performance. (case study of wood craft micro- and small-scale industries in Gianyar Regency, Bali)

    NASA Astrophysics Data System (ADS)

    Sukartini, N. W.; Sudarmini, N. M.; Lasmini, N. K.

    2018-01-01

    The aims of this research are to: (1) analyze the influence of Human Resource Ability on market access capacity in Wood Craft Micro and Small Industry; (2) to analyze the effect of market access capacity on business performance; (3) analyze the influence of Human Resources ability on business performance. Data were collected using questionnaires, interviews, observations, and literature studies. The resulting data were analyzed using Struture Equation Modeling (SEM). The results of the analysis show that (1) there is a positive and significant influence of the ability of Human Resources on market access capacity in Wood Craft Micro-and Small-Scale Industries in Gianyar; (2) there is a positive and significant influence of market access capacity on business performance; and (3) there is a positive and significant influence of Human Resource ability on business performance. To improve the ability to access the market and business performance, it is recommended that human resource ability need to be improved through training; government and higher education institutions are expected to play a role in improving the ability of human resources (craftsmen) through provision of training programs

  13. Open-Access Mega-Journals: A Bibliometric Profile

    PubMed Central

    Willett, Peter; Creaser, Claire; Fry, Jenny; Pinfield, Stephen; Spezi, Valérie

    2016-01-01

    In this paper we present the first comprehensive bibliometric analysis of eleven open-access mega-journals (OAMJs). OAMJs are a relatively recent phenomenon, and have been characterised as having four key characteristics: large size; broad disciplinary scope; a Gold-OA business model; and a peer-review policy that seeks to determine only the scientific soundness of the research rather than evaluate the novelty or significance of the work. Our investigation focuses on four key modes of analysis: journal outputs (the number of articles published and changes in output over time); OAMJ author characteristics (nationalities and institutional affiliations); subject areas (the disciplinary scope of OAMJs, and variations in sub-disciplinary output); and citation profiles (the citation distributions of each OAMJ, and the impact of citing journals). We found that while the total output of the eleven mega-journals grew by 14.9% between 2014 and 2015, this growth is largely attributable to the increased output of Scientific Reports and Medicine. We also found substantial variation in the geographical distribution of authors. Several journals have a relatively high proportion of Chinese authors, and we suggest this may be linked to these journals’ high Journal Impact Factors (JIFs). The mega-journals were also found to vary in subject scope, with several journals publishing disproportionately high numbers of articles in certain sub-disciplines. Our citation analsysis offers support for Björk & Catani’s suggestion that OAMJs’s citation distributions can be similar to those of traditional journals, while noting considerable variation in citation rates across the eleven titles. We conclude that while the OAMJ term is useful as a means of grouping journals which share a set of key characteristics, there is no such thing as a “typical” mega-journal, and we suggest several areas for additional research that might help us better understand the current and future role of

  14. Liquefied Petroleum Gas Industry Profile. Volume l. An Overview of the Industry.

    DOT National Transportation Integrated Search

    1985-11-01

    The report provides a broad, factual description of the U.S. liquefied petroleum gas (LP-gas) industry. The basic purpose of the report is to provide analysts and policymakers in government and industry with a comprehensive overview of the LP-gas ind...

  15. Occupational Profiles in the European Steel Industry.

    ERIC Educational Resources Information Center

    Franz, Hans-Werner; And Others

    The steel industry in Europe has faced great changes, with resulting layoffs and restructuring. Now that the most basic changes seem to be over, it has become evident that the remaining steel industry requires more highly trained workers than was the case previously. Although steel maintenance employees were always highly skilled, steel production…

  16. Sector-based VOCs emission factors and source profiles for the surface coating industry in the Pearl River Delta region of China.

    PubMed

    Zhong, Zhuangmin; Sha, Qing'e; Zheng, Junyu; Yuan, Zibing; Gao, Zongjiang; Ou, Jiamin; Zheng, Zhuoyun; Li, Cheng; Huang, Zhijiong

    2017-04-01

    Accurate depiction of VOCs emission characteristics is essential for the formulation of VOCs control strategies. As one of the continuous efforts in improving VOCs emission characterization in the Pearl River Delta (PRD) region, this study targeted on surface coating industry, the most important VOCs emission sources in the PRD. Sectors in analysis included shipbuilding coating, wood furniture coating, metal surface coating, plastic surface coating, automobile coating and fabric surface coating. Sector-based field measurement was conducted to characterize VOCs emission factors and source profiles in the PRD. It was found that the raw material-based VOCs emission factors for these six sectors ranged from 0.34 to 0.58kg VOCs per kg of raw materials (kg·kg -1 ) while the emission factors based on the production yield varied from 0.59kg to 13.72t VOCs for each production manufactured. VOCs emission factors of surface coating industry were therefore preferably calculated based on raw materials with low uncertainties. Source profiles differed greatly among different sectors. Aromatic was the largest group for shipbuilding coating, wood furniture coating, metal surface coating and automobile coating while the oxygenated VOCs (OVOCs) were the most abundant in the plastic and fabric surface coating sectors. The major species of aromatic VOCs in each of these six sectors were similar, mainly toluene and m/p-xylene, while the OVOCs varied among the different sectors. VOCs profiles in the three processes of auto industry, i.e., auto coating, auto drying and auto repairing, also showed large variations. The major species in these sectors in the PRD were similar with other places but the proportions of individual compounds were different. Some special components were also detected in the PRD region. This study highlighted the importance of updating local source profiles in a comprehensive and timely manner. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. The Target Industries: Profiles of Five Hazardous Occupations.

    ERIC Educational Resources Information Center

    Occupational Safety and Health Administration, Washington, DC.

    To contribute to a fuller understanding and awareness of the hazards involved in industries as well as to call attention to steps being taken to solve safety problems, this pamphlet surveys five industries cited among those having the highest rates of job-related injuries in the country. Industries include: (1) Roofing and Sheet Metal, (2)…

  18. Proposed industrial recovered materials utilization targets for the metals and metal-products industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1979-05-01

    The introductory chapter provides a discussion of the factors that affect the recovery and reuse of secondary materials and the competition between the primary and secondary metals industries. It discusses these industries in terms of resource characteristics, industry technology, pollution control requirements, market structure, the economics of recycling, and the issues involved in econometrically estimating scrap supply response behavior. It further presents the methodology established by DOE for the metals, textiles, rubber, and pulp and paper industries. The areas in which government policies might have a significant impact on the utilization of primary and secondary metals and on any recyclingmore » targets between now and 1987 are noted. Chapter 3 presents general profiles for the major industrial segments comprising SIC 33. The profiles include such topics as industry structure, process technology, materials and recycling flow, and future trends. Chapter 4 specifically covers the evaluation of recycling targets for the ferrous, aluminum, copper, zinc, and lead industries. (MCW)« less

  19. Industrial & Manufacturing Engineering | Classification | College of

    Science.gov Websites

    Engineering(414)229-6597msahmed@uwm.eduEng & Math Sciences EMS W383 profile photo Dr. Onur AsanAdjunct Assistant ProfessorIndustrial & Manufacturing Engineeringoasan@mcw.eduEng & Math Sciences profile ChandlerAdjunct InstructorIndustrial & Manufacturing Engineeringchandlec@uwm.eduEng & Math Sciences

  20. Optimized methods of chromatin immunoprecipitation for profiling histone modifications in industrial microalgae Nannochloropsis spp.

    PubMed

    Wei, Li; Xu, Jian

    2018-06-01

    Epigenetic factors such as histone modifications play integral roles in plant development and stress response, yet their implications in algae remain poorly understood. In the industrial oleaginous microalgae Nannochloropsis spp., the lack of an efficient methodology for chromatin immunoprecipitation (ChIP), which determines the specific genomic location of various histone modifications, has hindered probing the epigenetic basis of their photosynthetic carbon conversion and storage as oil. Here, a detailed ChIP protocol was developed for Nannochloropsis oceanica, which represents a reliable approach for the analysis of histone modifications, chromatin state, and transcription factor-binding sites at the epigenetic level. Using ChIP-qPCR, genes related to photosynthetic carbon fixation in this microalga were systematically assessed. Furthermore, a ChIP-Seq protocol was established and optimized, which generated a genome-wide profile of histone modification events, using histone mark H3K9Ac as an example. These results are the first step for appreciation of the chromatin landscape in industrial oleaginous microalgae and for epigenetics-based microalgal feedstock development. © 2018 Phycological Society of America.

  1. Internet Access and Pricing: Sorting Out the Options.

    ERIC Educational Resources Information Center

    Fowler, Thomas B.

    1997-01-01

    Discusses Internet access and pricing options. Highlights include restructuring of the telecommunications industry; current methods of access; economics of high-speed access; the impact of cheap Internet access; long-term possibilities; and a table that provides a comparison of Internet access methods. (LRW)

  2. Demographic & clinical profile of HIV infected children accessing care at Tambaram, Chennai, India.

    PubMed

    Rajasekaran, S; Jeyaseelan, L; Raja, K; Ravichandran, N

    2009-01-01

    Human immunodeficiency virus (HIV) is severely affecting the poorly educated and economically disadvantaged in Indian society. When children start developing clinical manifestations, needing treatment, they have to travel long distances for accessing care and support at tertiary institutions. This places an extra burden on patients, who are already struggling to cope with their illness. Sufficient data are needed for the government to evolve appropriate policy for providing care to the children affected with HIV. We undertook this study to present the socio-demographic characteristics, signs and symptoms, clinical profile, distance travelled and follow up pattern of HIV positive children who accessed care for the first time in a referral hospital at Chennai, India. Electronic medical records from patients diagnosed with HIV between 2002 and 2004 at the Government Hospital for Thoracic Medicine (GHTM) in Tambaram (Chennai) in India were analyzed to understand care-seeking behaviours. Demographic variables such as age, sex, education and occupation, data on clinical manifestations were examined together with geographic information. At GHTM 1,768 new paediatric patients accessed care from 2002 to 2004. Children aged less than 5 yr were 49.9 per cent; 1115 children had (63%) tuberculosis. Significantly, 14.9 and 20.6 per cent children had extra-pulmonary TB and disseminated TB respectively. Lower respiratory infection (15.8%), Pneumocystis carinii pneumonia (15.20%), oral/oesophageal candidiasis (13.5%), wasting (6.1%) and diarrhoeal disorders (3.5%) were the common clinical manifestations. In all 47 per cent children traveled between 200-400 km from home and 14 per cent travelled over 400 km. Our findings showed that tuberculosis should be regarded as the indicator disease for HIV infection in children, especially when they have clinical manifestations of progressive, non pulmonary and disseminated disease. The primary and secondary health care centres should have the

  3. Profiles of Material Supplier Industries to the Automotive Manufacturers

    DOT National Transportation Integrated Search

    1981-07-01

    This report presents a study of industries supplying materials to the automobile manufacturers. As the automobile industry restructures itself to produce more fuel-efficient vehicles, many of the industries that depend on the automobile will be force...

  4. An approach to the phytochemical profiling of rocket [Eruca sativa (Mill.) Thell].

    PubMed

    Villatoro-Pulido, Myriam; Priego-Capote, Feliciano; Álvarez-Sánchez, Beatriz; Saha, Shikha; Philo, Mark; Obregón-Cano, Sara; De Haro-Bailón, Antonio; Font, Rafael; Del Río-Celestino, Mercedes

    2013-12-01

    Eruca sativa (rocket) contains a wide range of compounds with nutraceutical and organoleptical properties. This research aimed to characterise the nutraceutical interest of four rocket accessions by analysis of glucosinolates, isothiocyanates, phenolics, carotenoids and carbohydrates. Different methods based on chromatographic separation with ultraviolet absorbance or mass spectrometry detection were used. The total content of glucosinolates ranged from 14.02 to 28.24 µmol g(-1) of dry weight. Glucoraphanin represented up to 52% of the total glucosinolates in leaves of one accession. Accessions showed differences in the hydrolysis of glucoraphanin to the isothiocyanate sulforaphane. No correlation between these compounds was observed, which insisted differences in the myrosinase activity within accessions. Rocket leaves had variable phenolic profiles represented by quercetin-3-glucoside, rutin, myricetin, quercetin and ferulic and p-coumaric acids. A high variability was observed for the total carotenoids ranged from 16.2 to 275 µg g(-1) with lutein as the main carotenoid. Glucose was the predominant sugar, representing >70% of the total soluble carbohydrates. Some accessions could be candidates for future breeding programmes because of their pattern of beneficial compounds for human health. However, further research is essential to evaluate the biological activity of these accessions before designing functional food. © 2013 Society of Chemical Industry.

  5. EPA GHG certification of medium- and heavy-duty vehicles: Development of road grade profiles representative of US controlled access highways

    DOE PAGES

    Wood, Eric; Duran, Adam; Kelly, Kenneth

    2016-09-27

    In collaboration with the U.S. Environmental Protection Agency and the U.S. Department of Energy, the National Renewable Energy Laboratory has conducted a national analysis of road grade characteristics experienced by U.S. medium- and heavy-duty trucks on controlled access highways. These characteristics have been developed using TomTom's commercially available street map and road grade database. Using the TomTom national road grade database, national statistics on road grade and hill distances were generated for the U.S. network of controlled access highways. These statistical distributions were then weighted using data provided by the U.S. Environmental Protection Agency for activity of medium- and heavy-dutymore » trucks on controlled access highways. Here, the national activity-weighted road grade and hill distance distributions were then used as targets for development of a handful of sample grade profiles potentially to be used in the U.S. Environmental Protection Agency's Greenhouse Gas Emissions Model certification tool as well as in dynamometer testing of medium- and heavy-duty vehicles and their powertrains.« less

  6. EPA GHG certification of medium- and heavy-duty vehicles: Development of road grade profiles representative of US controlled access highways

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wood, Eric; Duran, Adam; Kelly, Kenneth

    In collaboration with the U.S. Environmental Protection Agency and the U.S. Department of Energy, the National Renewable Energy Laboratory has conducted a national analysis of road grade characteristics experienced by U.S. medium- and heavy-duty trucks on controlled access highways. These characteristics have been developed using TomTom's commercially available street map and road grade database. Using the TomTom national road grade database, national statistics on road grade and hill distances were generated for the U.S. network of controlled access highways. These statistical distributions were then weighted using data provided by the U.S. Environmental Protection Agency for activity of medium- and heavy-dutymore » trucks on controlled access highways. Here, the national activity-weighted road grade and hill distance distributions were then used as targets for development of a handful of sample grade profiles potentially to be used in the U.S. Environmental Protection Agency's Greenhouse Gas Emissions Model certification tool as well as in dynamometer testing of medium- and heavy-duty vehicles and their powertrains.« less

  7. Profiling contextual factors which influence safety in heavy vehicle industries.

    PubMed

    Edwards, Jason R D; Davey, Jeremy; Armstrong, Kerry A

    2014-12-01

    A significant proportion of worker fatalities within Australia result from truck-related incidents. Truck drivers face a number of health and safety concerns. Safety culture, viewed here as the beliefs, attitudes and values shared by an organisation's workers, which interact with their surrounding context to influence behaviour, may provide a valuable lens for exploring safety-related behaviours in heavy vehicle operations. To date no major research has examined safety culture within heavy vehicle industries. As safety culture provides a means to interpret experiences and generate behaviour, safety culture research should be conducted with an awareness of the context surrounding safety. The current research sought to examine previous health and safety research regarding heavy vehicle operations to profile contextual factors which influence health and safety. A review of 104 peer-reviewed papers was conducted. Findings of these papers were then thematically analysed. A number of behaviours and scenarios linked with crashes and non-crash injuries were identified, along with a selection of health outcomes. Contextual factors which were found to influence these outcomes were explored. These factors were found to originate from government departments, transport organisations, customers and the road and work environment. The identified factors may provide points of interaction, whereby culture may influence health and safety outcomes. Copyright © 2014. Published by Elsevier Ltd.

  8. Metabolic Profiling of Geobacter sulfurreducens during Industrial Bioprocess Scale-Up.

    PubMed

    Muhamadali, Howbeer; Xu, Yun; Ellis, David I; Allwood, J William; Rattray, Nicholas J W; Correa, Elon; Alrabiah, Haitham; Lloyd, Jonathan R; Goodacre, Royston

    2015-05-15

    During the industrial scale-up of bioprocesses it is important to establish that the biological system has not changed significantly when moving from small laboratory-scale shake flasks or culturing bottles to an industrially relevant production level. Therefore, during upscaling of biomass production for a range of metal transformations, including the production of biogenic magnetite nanoparticles by Geobacter sulfurreducens, from 100-ml bench-scale to 5-liter fermentors, we applied Fourier transform infrared (FTIR) spectroscopy as a metabolic fingerprinting approach followed by the analysis of bacterial cell extracts by gas chromatography-mass spectrometry (GC-MS) for metabolic profiling. FTIR results clearly differentiated between the phenotypic changes associated with different growth phases as well as the two culturing conditions. Furthermore, the clustering patterns displayed by multivariate analysis were in agreement with the turbidimetric measurements, which displayed an extended lag phase for cells grown in a 5-liter bioreactor (24 h) compared to those grown in 100-ml serum bottles (6 h). GC-MS analysis of the cell extracts demonstrated an overall accumulation of fumarate during the lag phase under both culturing conditions, coinciding with the detected concentrations of oxaloacetate, pyruvate, nicotinamide, and glycerol-3-phosphate being at their lowest levels compared to other growth phases. These metabolites were overlaid onto a metabolic network of G. sulfurreducens, and taking into account the levels of these metabolites throughout the fermentation process, the limited availability of oxaloacetate and nicotinamide would seem to be the main metabolic bottleneck resulting from this scale-up process. Additional metabolite-feeding experiments were carried out to validate the above hypothesis. Nicotinamide supplementation (1 mM) did not display any significant effects on the lag phase of G. sulfurreducens cells grown in the 100-ml serum bottles. However

  9. Predictors of nonfunctional arteriovenous access at hemodialysis initiation and timing of access creation: A registry-based study

    PubMed Central

    Metzger, Marie; Labeeuw, Michel; Ayav, Carole; Jacquelinet, Christian; Massy, Ziad A.; Stengel, Bénédicte

    2017-01-01

    Determinants of nonfunctional arteriovenous (AV) access, including timing of AV access creation, have not been sufficiently described. We studied 29 945 patients who had predialysis AV access placement and were included in the French REIN registry from 2005 through 2013. AV access was considered nonfunctional when dialysis began with a catheter. We estimated crude and adjusted odds ratio (OR) with 95% confidence intervals (CI) of nonfunctional versus functional AV access associated with case-mix, facility characteristics, and timing of AV access creation. Analyses were stratified by dialysis start condition (planned or as an emergency) and comorbidity profile. Overall, 18% patients had nonfunctional AV access at hemodialysis initiation. In the group with planned dialysis start, female gender (OR 1.43, 95% CI 1.32–1.56), diabetes (OR 1.28, 95% CI 1.15–1.44), and a higher number of cardiovascular comorbidities (OR 1.27, 95% CI 1.09–1.49, and 1.31, 1.05–1.64, for 3 and >3 cardiovascular comorbidities versus none, respectively) were independent predictors of nonfunctional AV access. A higher percentage of AV access creation at the region level was associated with a lower rate of nonfunctional AV access (OR 0.98, 95% CI 0.98–0.99 per 1% increase). The odds of nonfunctional AV access decreased as time from creation to hemodialysis initiation increased up to 3 months in nondiabetic patients with fewer than 2 cardiovascular comorbidities and 6 months in patients with diabetes or 2 or more such comorbidities. In conclusion, both patient characteristics and clinical practices may play a role in successful AV access use at hemodialysis initiation. Adjusting the timing of AV access creation to patients’ comorbidity profiles may improve functional AV access rates. PMID:28749967

  10. Predictors of nonfunctional arteriovenous access at hemodialysis initiation and timing of access creation: A registry-based study.

    PubMed

    Alencar de Pinho, Natalia; Coscas, Raphael; Metzger, Marie; Labeeuw, Michel; Ayav, Carole; Jacquelinet, Christian; Massy, Ziad A; Stengel, Bénédicte

    2017-01-01

    Determinants of nonfunctional arteriovenous (AV) access, including timing of AV access creation, have not been sufficiently described. We studied 29 945 patients who had predialysis AV access placement and were included in the French REIN registry from 2005 through 2013. AV access was considered nonfunctional when dialysis began with a catheter. We estimated crude and adjusted odds ratio (OR) with 95% confidence intervals (CI) of nonfunctional versus functional AV access associated with case-mix, facility characteristics, and timing of AV access creation. Analyses were stratified by dialysis start condition (planned or as an emergency) and comorbidity profile. Overall, 18% patients had nonfunctional AV access at hemodialysis initiation. In the group with planned dialysis start, female gender (OR 1.43, 95% CI 1.32-1.56), diabetes (OR 1.28, 95% CI 1.15-1.44), and a higher number of cardiovascular comorbidities (OR 1.27, 95% CI 1.09-1.49, and 1.31, 1.05-1.64, for 3 and >3 cardiovascular comorbidities versus none, respectively) were independent predictors of nonfunctional AV access. A higher percentage of AV access creation at the region level was associated with a lower rate of nonfunctional AV access (OR 0.98, 95% CI 0.98-0.99 per 1% increase). The odds of nonfunctional AV access decreased as time from creation to hemodialysis initiation increased up to 3 months in nondiabetic patients with fewer than 2 cardiovascular comorbidities and 6 months in patients with diabetes or 2 or more such comorbidities. In conclusion, both patient characteristics and clinical practices may play a role in successful AV access use at hemodialysis initiation. Adjusting the timing of AV access creation to patients' comorbidity profiles may improve functional AV access rates.

  11. Greenhouse Gas and Carbon Profile of the U.S. Forest Products Industry Value Chain

    PubMed Central

    2010-01-01

    A greenhouse gas and carbon accounting profile was developed for the U.S. forest products industry value chain for 1990 and 2004−2005 by examining net atmospheric fluxes of CO2 and other greenhouse gases (GHGs) using a variety of methods and data sources. Major GHG emission sources include direct and indirect (from purchased electricity generation) emissions from manufacturing and methane emissions from landfilled products. Forest carbon stocks in forests supplying wood to the industry were found to be stable or increasing. Increases in the annual amounts of carbon removed from the atmosphere and stored in forest products offset about half of the total value chain emissions. Overall net transfers to the atmosphere totaled 91.8 and 103.5 TgCO2-eq. in 1990 and 2005, respectively, although the difference between these net transfers may not be statistically significant. Net transfers were higher in 2005 primarily because additions to carbon stored in forest products were less in 2005. Over this same period, energy-related manufacturing emissions decreased by almost 9% even though forest products output increased by approximately 15%. Several types of avoided emissions were considered separately and were collectively found to be notable relative to net emissions. PMID:20355695

  12. Mask industry assessment: 2008

    NASA Astrophysics Data System (ADS)

    Hughes, Greg; Yun, Henry

    2008-10-01

    Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by David Powell Consulting to gather information about the mask industry as an objective assessment of its overall condition. The survey is designed with the input of semiconductor company mask technologists, merchant mask suppliers, and industry equipment makers. This year's assessment is the seventh in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey is basically the same as the 2005 through 2007 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that create a detailed profile of both the business and technical status of the critical mask industry.

  13. Mask industry assessment: 2009

    NASA Astrophysics Data System (ADS)

    Hughes, Greg; Yun, Henry

    2009-10-01

    Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by David Powell Consulting to gather information about the mask industry as an objective assessment of its overall condition. The survey is designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the eighth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey is basically the same as the 2005 through 2008 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that create a detailed profile of both the business and technical status of the critical mask industry. This in combination with the past surveys represents a comprehensive view of changes in the industry.

  14. Are We in Sync? How Industry Practitioners and Academics Profile Managerial Competencies: A Study of an Association to Advance Collegiate Schools of Business-Accredited Business School in Hong Kong

    ERIC Educational Resources Information Center

    Ko, Stephen; Chan, Simon C. H.

    2017-01-01

    The authors draw on the taxonomy of managerial competencies to assess the alignment of perceptions between industry practitioners and business academics when profiling managerial competencies required for effective performance in workplaces. Findings show that the set of managerial competency profiles, as viewed by practitioners, generally fit…

  15. Using OES Occupation Profiles in a Job Search

    ERIC Educational Resources Information Center

    Cunningham, Chris

    2013-01-01

    Using occupation profiles, jobseekers can see which industries employ the most workers in a particular field, which geographical areas have high concentrations of those jobs, and how wages differ by industry and geographical area. This article gives an overview of the data in the Occupational Employment Statistics (OES) occupation profiles. It…

  16. JASPAR RESTful API: accessing JASPAR data from any programming language.

    PubMed

    Khan, Aziz; Mathelier, Anthony

    2018-05-01

    JASPAR is a widely used open-access database of curated, non-redundant transcription factor binding profiles. Currently, data from JASPAR can be retrieved as flat files or by using programming language-specific interfaces. Here, we present a programming language-independent application programming interface (API) to access JASPAR data using the Representational State Transfer (REST) architecture. The REST API enables programmatic access to JASPAR by most programming languages and returns data in eight widely used formats. Several endpoints are available to access the data and an endpoint is available to infer the TF binding profile(s) likely bound by a given DNA binding domain protein sequence. Additionally, it provides an interactive browsable interface for bioinformatics tool developers. This REST API is implemented in Python using the Django REST Framework. It is accessible at http://jaspar.genereg.net/api/ and the source code is freely available at https://bitbucket.org/CBGR/jaspar under GPL v3 license. aziz.khan@ncmm.uio.no or anthony.mathelier@ncmm.uio.no. Supplementary data are available at Bioinformatics online.

  17. Expanding Access

    ERIC Educational Resources Information Center

    Roach, Ronald

    2007-01-01

    There is no question that the United States lags behind most industrialized nations in consumer access to broadband Internet service. For many policy makers and activists, this shortfall marks the latest phase in the struggle to overcome the digital divide. To remedy this lack of broadband affordability and availability, one start-up firm--with…

  18. Fatty Acid Profile and Unigene-Derived Simple Sequence Repeat Markers in Tung Tree (Vernicia fordii)

    PubMed Central

    Zhang, Lin; Jia, Baoguang; Tan, Xiaofeng; Thammina, Chandra S.; Long, Hongxu; Liu, Min; Wen, Shanna; Song, Xianliang; Cao, Heping

    2014-01-01

    Tung tree (Vernicia fordii) provides the sole source of tung oil widely used in industry. Lack of fatty acid composition and molecular markers hinders biochemical, genetic and breeding research. The objectives of this study were to determine fatty acid profiles and develop unigene-derived simple sequence repeat (SSR) markers in tung tree. Fatty acid profiles of 41 accessions showed that the ratio of α-eleostearic acid was increasing continuously with a parallel trend to the amount of tung oil accumulation while the ratios of other fatty acids were decreasing in different stages of the seeds and that α-eleostearic acid (18∶3) consisted of 77% of the total fatty acids in tung oil. Transcriptome sequencing identified 81,805 unigenes from tung cDNA library constructed using seed mRNA and discovered 6,366 SSRs in 5,404 unigenes. The di- and tri-nucleotide microsatellites accounted for 92% of the SSRs with AG/CT and AAG/CTT being the most abundant SSR motifs. Fifteen polymorphic genic-SSR markers were developed from 98 unigene loci tested in 41 cultivated tung accessions by agarose gel and capillary electrophoresis. Genbank database search identified 10 of them putatively coding for functional proteins. Quantitative PCR demonstrated that all 15 polymorphic SSR-associated unigenes were expressed in tung seeds and some of them were highly correlated with oil composition in the seeds. Dendrogram revealed that most of the 41 accessions were clustered according to the geographic region. These new polymorphic genic-SSR markers will facilitate future studies on genetic diversity, molecular fingerprinting, comparative genomics and genetic mapping in tung tree. The lipid profiles in the seeds of 41 tung accessions will be valuable for biochemical and breeding studies. PMID:25167054

  19. Latino Adolescent Educational Affiliation Profiles

    ERIC Educational Resources Information Center

    Gonzalez, Laura M.; Cavanaugh, Alyson M.; Taylor, Laura K.; Stein, Gabriela L.; Mayton, Heather N.

    2017-01-01

    Supporting postsecondary access for Latino adolescents is important due to the size of the population and mixed evidence of progress. In order to better understand the college-going and school belonging attitudes of Latinos, we used an exploratory latent profile analysis to identify the "educational affiliation" profiles present in a…

  20. Commercial Banking Industry Survey.

    ERIC Educational Resources Information Center

    Bright Horizons Children's Centers, Cambridge, MA.

    Work and family programs are becoming increasingly important in the commercial banking industry. The objective of this survey was to collect information and prepare a commercial banking industry profile on work and family programs. Fifty-nine top American commercial banks from the Fortune 500 list were invited to participate. Twenty-two…

  1. Study on the impact of industrial flue gases on the PCDD/Fs congener profile in ambient air.

    PubMed

    Węgiel, Małgorzata; Chrząszcz, Ryszard; Maślanka, Anna; Grochowalski, Adam

    2014-11-01

    The aim of this study was to examine the impact of emissions from combustion processes from sinter, medical, waste and sewage waste incineration plants on the PCDD and PCDF congener profile in ambient air in Krakow (city in Poland). The subject matter of the study were air samples from the outskirts and the city center. It was found that in flue gases from industrial sources and in ambient air the share of PCDF congeners in relation to the total content of PCDD/Fs was higher than the share of PCDDs. However, in air samples collected in the city center, this relationship was reversed. The PCDD congener profiles in flue gases and in air samples are comparable. However, in the samples from the city centre, the share of OCDD is significantly higher and amounts to about 80%. The PCDF congener shares show higher spatial diversity, although in all the analyzed air samples, ODCF and 1,2,3,4,6,7,8 HpCDF dominated. Analyzing the share of congeners in regard to the sum of PCDDs/Fs a mutual resemblance of air from the suburbs, exhaust gases from the sinter ore and sewage sludge incinerator plant was observed. The study showed a similarity between the profile of congeners in air from the city centre and exhaust gases from the medical waste incinerator. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Industrial Location Research Studies: Reports 17-25.

    ERIC Educational Resources Information Center

    Fantus Co., Inc., New York, NY.

    Nine industrial-location research studies of the Appalachian region are presented in this document. These studies relate to the casting, plastic, metal, and food industries. Each study devotes sections to (1) a profile of the industry, (2) the industry's prospects for growth, (3) technology and trends, (4) primary factors influencing selection of…

  3. JASPAR 2018: update of the open-access database of transcription factor binding profiles and its web framework.

    PubMed

    Khan, Aziz; Fornes, Oriol; Stigliani, Arnaud; Gheorghe, Marius; Castro-Mondragon, Jaime A; van der Lee, Robin; Bessy, Adrien; Chèneby, Jeanne; Kulkarni, Shubhada R; Tan, Ge; Baranasic, Damir; Arenillas, David J; Sandelin, Albin; Vandepoele, Klaas; Lenhard, Boris; Ballester, Benoît; Wasserman, Wyeth W; Parcy, François; Mathelier, Anthony

    2018-01-04

    JASPAR (http://jaspar.genereg.net) is an open-access database of curated, non-redundant transcription factor (TF)-binding profiles stored as position frequency matrices (PFMs) and TF flexible models (TFFMs) for TFs across multiple species in six taxonomic groups. In the 2018 release of JASPAR, the CORE collection has been expanded with 322 new PFMs (60 for vertebrates and 262 for plants) and 33 PFMs were updated (24 for vertebrates, 8 for plants and 1 for insects). These new profiles represent a 30% expansion compared to the 2016 release. In addition, we have introduced 316 TFFMs (95 for vertebrates, 218 for plants and 3 for insects). This release incorporates clusters of similar PFMs in each taxon and each TF class per taxon. The JASPAR 2018 CORE vertebrate collection of PFMs was used to predict TF-binding sites in the human genome. The predictions are made available to the scientific community through a UCSC Genome Browser track data hub. Finally, this update comes with a new web framework with an interactive and responsive user-interface, along with new features. All the underlying data can be retrieved programmatically using a RESTful API and through the JASPAR 2018 R/Bioconductor package. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  4. JASPAR 2018: update of the open-access database of transcription factor binding profiles and its web framework

    PubMed Central

    Fornes, Oriol; Stigliani, Arnaud; Gheorghe, Marius; Castro-Mondragon, Jaime A; Bessy, Adrien; Chèneby, Jeanne; Kulkarni, Shubhada R; Tan, Ge; Baranasic, Damir; Arenillas, David J; Vandepoele, Klaas; Parcy, François

    2018-01-01

    Abstract JASPAR (http://jaspar.genereg.net) is an open-access database of curated, non-redundant transcription factor (TF)-binding profiles stored as position frequency matrices (PFMs) and TF flexible models (TFFMs) for TFs across multiple species in six taxonomic groups. In the 2018 release of JASPAR, the CORE collection has been expanded with 322 new PFMs (60 for vertebrates and 262 for plants) and 33 PFMs were updated (24 for vertebrates, 8 for plants and 1 for insects). These new profiles represent a 30% expansion compared to the 2016 release. In addition, we have introduced 316 TFFMs (95 for vertebrates, 218 for plants and 3 for insects). This release incorporates clusters of similar PFMs in each taxon and each TF class per taxon. The JASPAR 2018 CORE vertebrate collection of PFMs was used to predict TF-binding sites in the human genome. The predictions are made available to the scientific community through a UCSC Genome Browser track data hub. Finally, this update comes with a new web framework with an interactive and responsive user-interface, along with new features. All the underlying data can be retrieved programmatically using a RESTful API and through the JASPAR 2018 R/Bioconductor package. PMID:29140473

  5. Digital access and national character.

    PubMed

    Yang, Bijou; Lester, David

    2006-04-01

    A digital access index was associated with measures of national character (such as extraversion and individualism) for 18 industrialized nations, but statistical controls for gross domestic product per capita eliminated these associations.

  6. Assessment of chemical and genetic variability in Tanacetum gracile accessions collected from cold desert of Western Himalaya.

    PubMed

    Mahajan, Vidushi; Chouhan, Rekha; Kitchlu, Surinder; Bindu, Kushal; Koul, Sushma; Singh, Bikarma; Bedi, Yashbir S; Gandhi, Sumit G

    2018-06-01

    Genetic diversity is essential for survival and adaptation of high altitude plants such as those of Tanacetum genus, which are constantly exposed to environmental stress. We collected flowering shoots of ten accessions of Tanacetum gracile Hook.f. & Thomson (Asteraceae) (Tg 1-Tg 10), from different regions of cold desert of Western Himalaya. Chemical profile of the constituents, as inferred from GC-MS, exhibited considerable variability. Percentage yield of essential oil ranged from 0.2 to 0.75% (dry-weight basis) amongst different accessions. Tg 1 and Tg 6 were found to produce high yields of camphor (46%) and lavandulol (41%), respectively. Alpha -phellendrene, alpha -bisabool, p -cymene and chamazulene were the main oil components in other accessions. Genetic variability among the accessions was studied using RAPD markers as well as by sequencing and analyzing nuclear 18S rDNA, and plastid rbcL and matK loci. The polymorphic information content (PIC) of RAPD markers ranged from 0.18 to 0.5 and the analysis clustered the accessions into two major clades. The present study emphasized the importance of survey, collection, and conservation of naturally existing chemotypes of medicinal and aromatic plants, considering their potential use in aroma and pharmaceutical industry.

  7. Access to pasture for dairy cows: responses from an online engagement.

    PubMed

    Schuppli, C A; von Keyserlingk, M A G; Weary, D M

    2014-11-01

    An online engagement exercise documented the views of Canadian and U.S. participants affiliated and unaffiliated with the dairy industry on the issue of pasture access for dairy cows. A total of 414 people participated in 10 independent web forums. Providing access to more natural living conditions, including pasture, was viewed as important for the large majority of participants, including those affiliated with the dairy industry. This finding is at odds with current practice on the majority of farms in North America that provide little or no access to pasture. Participant comments showed that the perceived value of pasture access for dairy cattle went beyond the benefits of eating grass; participants cited as benefits exposure to fresh air, ability to move freely, ability to live in social groups, improved health, and healthier milk products. To accommodate the challenges of allowing pasture access on farms, some participants argued in favor of hybrid systems that provide a mixture of indoor confinement housing and grazing. Understanding the beliefs and concerns of participants affiliated and unaffiliated with the dairy industry allows for the identification of contentious topics as well as areas of agreement; this is important in efforts to better harmonize industry practices with societal expectations.

  8. Mask industry assessment trend analysis

    NASA Astrophysics Data System (ADS)

    Hughes, Greg; Yun, Henry

    2009-01-01

    Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's survey data were presented in detail at BACUS and the detailed trend analysis presented at EMLC. The survey is designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the seventh in the current series of annual reports. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments on critical path issues. This year's survey is basically the same as the surveys in 2005 through 2007. Questions are grouped into seven categories: General Business Profile Information, Data Processing, Yields and Yield Loss, Mechanisms, Delivery Times, Returns, and Services. (Examples are given below). Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry.

  9. Competency Profiles for Vocational Education. Final Report.

    ERIC Educational Resources Information Center

    Missouri Univ., Columbia. Instructional Materials Lab.

    This document contains a brief report describing the development of validated competency profiles for business, home economics, and industrial education at the University of Missouri-Columbia, as well as a set of the profiles. The profiles are used to evaluate students' levels of mastery of competencies in the content areas of each course. Two…

  10. Philippine Public Relations: An Industry and Practitioner Profile.

    ERIC Educational Resources Information Center

    Panol, Zenaida Sarabia

    2000-01-01

    Provides a comprehensive look at public relations in the Philippines; traces how public relations evolved in this Southeast Asian country; and discusses the current status of the industry and its practitioners. (NH)

  11. Proposed industrial recovered materials utilization targets for the metals and metal products industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1979-05-01

    Set targets for increased utilization of energy-saving recovered materials in the metals and metal products industries (ferrous, aluminium, copper, zinc, and lead) are discussed. Data preparation and methodology development and analysis of the technological and economic factors in order to prepare draft targets for the use of recovered materials are covered. Chapter 2 provides an introductory discussion of the factors that affect the recovery and reuse of secondary materials and the competition between the primary and secondary metals industries. Chapter 3 presents general profiles for the major industrial segments comprising SIC 33, including industry structure, process technology, materials and recyclingmore » flow, and future trends for the 5 industries: ferrous, aluminium, copper, zinc, and lead. Chapter 4 presents the evaluation of recycling targets for those industries. (MCW)« less

  12. Accessibility Marking: Discourse Functions, Discourse Profiles, and Processing Cues

    ERIC Educational Resources Information Center

    Ariel, Mira

    2004-01-01

    When accounting for the usage of some linguistic form, one can refer to its discourse profile, all concomitant features frequently co-occurring with that form in discourse, or abstract a more general claim about its discourse function, referring only to the necessary and sufficient conditions for the proper occurrence of the form. This article…

  13. New Technology Industries. Skills Task Force Research Paper 10.

    ERIC Educational Resources Information Center

    Hendry, Chris

    This paper provides an overview of the growth of new technology industries in Great Britain and the skills needed for these industries. The industries are advanced materials, biotechnology, and opto-electronics. The report profiles the current status, expected growth, and skills needed for each of these industry sectors. It also points out the…

  14. Mask industry assessment trend analysis: 2010

    NASA Astrophysics Data System (ADS)

    Hughes, Greg; Yun, Henry

    2010-05-01

    Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply as top critical issues. A survey was designed with input from semiconductor company mask technologists and merchant mask suppliers and support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's assessment was the eighth in the current series of annual reports. Its data were presented in detail at BACUS, and the detailed trend analysis is presented at EMLC. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. Its results will be used to guide future investments on critical path issues. This year's survey is basically the same as the surveys in 2005 through 2009. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry.

  15. PEER Business and Industry Partnership (BIP)

    Science.gov Websites

    PEER logo Pacific Earthquake Engineering Research Center home about peer news events research Industry Partnership (BIP) Industry and government partners are an integral part of the research program at research and education programs and provides access to PEER researchers and products. Researchers share

  16. Components of the airport access system

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The organizations and agencies which make up or influence the airport access system are examined. These include the airport, the airline industry, the public and private transit agencies which provide ground access to the airport, and the regulatory agencies which affect all of these organizations and their actions. Each component, with the exception of the regulatory agencies is described in terms of its legal status, its sources of funds, and the nature of its relationship with the other components. Conclusions regarding the system components' effects on airport access and recommendations for changes which appear practical are presented.

  17. View from industry.

    PubMed

    Guezuraga, Robert M; Steinbring, Denise Y

    2004-12-01

    The transformation of the cardiothoracic specialty requires a complete mind-set and skill-set change such that the specialty repositions itself in this era of complex cardiac disease, increased competition, technology innovation, financial constraints, rationed access to technology and increased scrutiny on clinical outcomes. The future offers a variety of surgical treatment options for patients suffering from disease states that have traditionally not been treated by cardiothoracic surgeons such as ablation for atrial fibrillation and cell therapy for heart failure. In addition, patient expectations for prolonged and quality-improved years are higher as they educate themselves on options that are less invasive. Failure to build a new repertoire of skills will mean diminished access to patients because referrals will be made to those cardiothoracic surgeons who are seen as innovators. Time is of the essence, as market dynamics are taking their toll. Cardiothoracic surgery today is still one of the most profitable specialties within the hospital and therefore, hospitals should be willing to support and differentiate their heart programs through new technology adoption. But cardiothoracic surgeons need to be open to explore new methods for treating cardiac disease and to work with industry in proving the efficacy and patient benefits of new procedures. At a higher level, pan-European approaches to new technology adoption need to focus on increased governmental spending on healthcare and on reimbursement strategies that make this possible. The medical device industry continues to invest heavily in new techniques and technologies and should be viewed as a strategic partner by individual surgeons as well as by the surgical societies. As industry continues to focus on areas such as research, product development, market development, professional and resident education, reimbursement, and patient access issues, it is imperative for surgeons to work collaboratively with

  18. Mask industry assessment trend analysis

    NASA Astrophysics Data System (ADS)

    Shelden, Gilbert; Marmillion, Patricia; Hughes, Greg

    2008-04-01

    Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by SEMI North America to gather information about the mask industry as an objective assessment of its overall condition. This year's survey data were presented in detail at BACUS and the detailed trend analysis presented at EMLC. The survey is designed with the input of semiconductor company mask technologists, merchant mask suppliers, and industry equipment makers. This year's assessment is the sixth in the current series of annual reports. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments on critical path issues. This year's survey is basically the same as the 2005 and 2006 surveys. Questions are grouped into eight categories: General Business Profile Information, Data Processing, Yields and Yield Loss, Mechanisms, Delivery Times, Returns and Services, Operating Cost Factors, and Equipment Utilization. Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry. Note: the questions covering operating cost factors and equipment utilization were added to the survey only in 2005; therefore, meaningful trend analysis is not available.

  19. Generic ICT Skills Profiles: Future Skills for Tomorrow's World.

    ERIC Educational Resources Information Center

    International Co-operation Europe Ltd. (ICEL), Brussels, Belgium.

    This document describes generic skills profiles relevant to key jobs in information and communications technology (ICT). The profiles cover the main job areas for which the ICT industry is experiencing skills shortages. These types of information are provided for 18 generic job profiles: job description (vision, role, lifestyle); examples of job…

  20. 77 FR 54777 - Accelerating Investment in Industrial Energy Efficiency

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-05

    ...--Accelerating Investment in Industrial Energy Efficiency Executive Order 13625--Improving Access to Mental... Accelerating Investment in Industrial Energy Efficiency By the authority vested in me as President by the... helping to facilitate investments in energy efficiency at industrial facilities, it is hereby ordered as...

  1. 15 CFR 784.1 - Complementary access: General information on the purpose of complementary access, affected...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... may be conducted, on a selective basis, to verify the absence of undeclared nuclear material and nuclear related activities at reportable uranium hard-rock mines and ore beneficiation plants (see § 783.1... OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL REGULATIONS COMPLEMENTARY ACCESS...

  2. Association of Cervical Cancer Screening with Knowledge of Risk Factors, Access to Health Related Information, Health Profiles, and Health Competence Beliefs among Community-Dwelling Women in Japan

    PubMed Central

    Oba, Shino; Toyoshima, Masato; Ogata, Hiromitsu

    2017-01-01

    Objective: The aim of this study was to evaluate the past attendance for cervical cancer screening with knowledge of risk factors, access to health-related information, health profiles and health competence beliefs among Japanese women. Methods: Women ages 25, 30, 35, 40, 45, 50, 55, and 60 were contacted cross-sectionally as part of a project for the Japanese Ministry of Health, Labour and Welfare in Nikaho, Akita prefecture Japan between June 2010 and March 2011, and 249 women were analyzed for the current study. The questionnaire asked about past cervical cancer screening. Knowledge of each cervical cancer risk factor was determined on a four-point scale. A barriers to information access scale was utilized to assess the degree of difficulty in accessing health-related information. Health profiles were measured using the EuroQOL EQ-5D. Perceived health competence was measured using a scale (PHCS). The association was evaluated with odds ratios with 95% confidence interval were calculated from a logistic regression analysis after adjustment for age and potential confounders. The trend across the level was also assessed. Results: Women who knew that sexual intercourse at young age was a risk factor were significantly more likely to have participated in cervical cancer screening sometime in their lives (p for trend =0.02). Women who had pain/discomfort and those who had anxiety/depression were significantly more likely to have participated in cervical screening within the past two years (odds ratio [OR]: 2.02, 95% confidence interval [CI]: 1.04–3.94; OR: 2.32, 95% CI: 1.05–5.16, respectively). Women with higher PHCS were significantly more likely to have attended for cervical screened at some point in their lives (p=0.04). Conclusion: This study observed that specific knowledge of cervical cancer risk factors, health profiles and PHCS were associated with the past attendance for cervical cancer screening among women in a community. Further researches are

  3. Hot air vulcanization of rubber profiles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gerlach, J.

    1995-07-01

    Elastomer profiles are deployed in quantity by the automobile industry as seals and wateproofing in coachwork. The high standards demanded by the industry; improvement in weather prediction, noise reduction, restriction of tolerances, together with powerful demand for EPDM force the rubber processing industry into development, particularly of elastomers. Complex proofing systems must also be achieved with extremely complicated profile forms. All too often such profiles have an extremely large surface together with a low cross-section density. They frequently consist of two or three rubber compounds and are steel reinforced. Sometimes they are flocked and coated with a low friction finish.more » Such high-tech seals require an adjustment of the vulcanization method. The consistent trend in the nineties towards lower quantities of elastomer per sealing unit and the dielectric factor, especially with EPDM, has brought an old fashioned vulcanization method once more to the fore, a method developed over the past years to an extremely high standard, namely the hot-air method. This paper describes various vulcanization and curing methods and their relative merits and disadvantages, the Gerlach hot-air concept, the hot air installation concept, and energy saving and efficiency afforded by this technique. 4 figs.« less

  4. Accessibility to health care facilities in Montreal Island: an application of relative accessibility indicators from the perspective of senior and non-senior residents.

    PubMed

    Paez, Antonio; Mercado, Ruben G; Farber, Steven; Morency, Catherine; Roorda, Matthew

    2010-10-25

    Geographical access to health care facilities is known to influence health services usage. As societies age, accessibility to health care becomes an increasingly acute public health concern. It is known that seniors tend to have lower mobility levels, and it is possible that this may negatively affect their ability to reach facilities and services. Therefore, it becomes important to examine the mobility situation of seniors vis-a-vis the spatial distribution of health care facilities, to identify areas where accessibility is low and interventions may be required. Accessibility is implemented using a cumulative opportunities measure. Instead of assuming a fixed bandwidth (i.e. a distance threshold) for measuring accessibility, in this paper the bandwidth is defined using model-based estimates of average trip length. Average trip length is an all-purpose indicator of individual mobility and geographical reach. Adoption of a spatial modelling approach allows us to tailor these estimates of travel behaviour to specific locations and person profiles. Replacing a fixed bandwidth with these estimates permits us to calculate customized location- and person-based accessibility measures that allow inter-personal as well as geographical comparisons. The case study is Montreal Island. Geo-coded travel behaviour data, specifically average trip length, and relevant traveller's attributes are obtained from the Montreal Household Travel Survey. These data are complemented with information from the Census. Health care facilities, also geo-coded, are extracted from a comprehensive business point database. Health care facilities are selected based on Standard Industrial Classification codes 8011-21 (Medical Doctors and Dentists). Model-based estimates of average trip length show that travel behaviour varies widely across space. With the exception of seniors in the downtown area, older residents of Montreal Island tend to be significantly less mobile than people of other age cohorts

  5. Mask industry assessment trend analysis: 2012

    NASA Astrophysics Data System (ADS)

    Chan, Y. David

    2012-02-01

    Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply among the top critical issues for lithography. A survey was designed by SEMATECH with input from semiconductor company mask technologists and merchant mask suppliers to objectively assess the overall conditions of the mask industry. With the continued support of the industry, this year's assessment was the tenth in the current series of annual reports. This year's survey is basically the same as the 2005 through 2011 surveys. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that ultimately produce a detailed profile of both the business and technical status of the critical mask industry. We received data from 11 companies this year, which was a record high since the beginning of the series. The responding companies represented more than 96% of the volume shipped and about 90% of the 2011 revenue for the photomask industry. These survey reports are often used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. They will continue to serve as a valuable reference to identify strengths and opportunities. Results can also be used to guide future investments in critical path issues.

  6. Optical Access Networks

    NASA Astrophysics Data System (ADS)

    Zheng, Jun; Ansari, Nirwan

    2005-02-01

    Call for Papers: Optical Access Networks With the wide deployment of fiber-optic technology over the past two decades, we have witnessed a tremendous growth of bandwidth capacity in the backbone networks of today's telecommunications infrastructure. However, access networks, which cover the "last-mile" areas and serve numerous residential and small business users, have not been scaled up commensurately. The local subscriber lines for telephone and cable television are still using twisted pairs and coaxial cables. Most residential connections to the Internet are still through dial-up modems operating at a low speed on twisted pairs. As the demand for access bandwidth increases with emerging high-bandwidth applications, such as distance learning, high-definition television (HDTV), and video on demand (VoD), the last-mile access networks have become a bandwidth bottleneck in today's telecommunications infrastructure. To ease this bottleneck, it is imperative to provide sufficient bandwidth capacity in the access networks to open the bottleneck and thus present more opportunities for the provisioning of multiservices. Optical access solutions promise huge bandwidth to service providers and low-cost high-bandwidth services to end users and are therefore widely considered the technology of choice for next-generation access networks. To realize the vision of optical access networks, however, many key issues still need to be addressed, such as network architectures, signaling protocols, and implementation standards. The major challenges lie in the fact that an optical solution must be not only robust, scalable, and flexible, but also implemented at a low cost comparable to that of existing access solutions in order to increase the economic viability of many potential high-bandwidth applications. In recent years, optical access networks have been receiving tremendous attention from both academia and industry. A large number of research activities have been carried out or

  7. Nondestructive strain depth profiling with high energy X-ray diffraction: System capabilities and limitations

    NASA Astrophysics Data System (ADS)

    Zhang, Zhan; Wendt, Scott; Cosentino, Nicholas; Bond, Leonard J.

    2018-04-01

    Limited by photon energy, and penetration capability, traditional X-ray diffraction (XRD) strain measurements are only capable of achieving a few microns depth due to the use of copper (Cu Kα1) or molybdenum (Mo Kα1) characteristic radiation. For deeper strain depth profiling, destructive methods are commonly necessary to access layers of interest by removing material. To investigate deeper depth profiles nondestructively, a laboratory bench-top high-energy X-ray diffraction (HEXRD) system was previously developed. This HEXRD method uses an industrial 320 kVp X-Ray tube and the Kα1 characteristic peak of tungsten, to produces a higher intensity X-ray beam which enables depth profiling measurement of lattice strain. An aluminum sample was investigated with deformation/load provided using a bending rig. It was shown that the HEXRD method is capable of strain depth profiling to 2.5 mm. The method was validated using an aluminum sample where both the HEXRD method and the traditional X-ray diffraction method gave data compared with that obtained using destructive etching layer removal, performed by a commercial provider. The results demonstrate comparable accuracy up to 0.8 mm depth. Nevertheless, higher attenuation capabilities in heavier metals limit the applications in other materials. Simulations predict that HEXRD works for steel and nickel in material up to 200 µm, but experiment results indicate that the HEXRD strain profile is not practical for steel and nickel material, and the measured diffraction signals are undetectable when compared to the noise.

  8. Corporate Social Responsibility and Access to Policy Élites: An Analysis of Tobacco Industry Documents

    PubMed Central

    Fooks, Gary J.; Gilmore, Anna B.; Smith, Katherine E.; Collin, Jeff; Holden, Chris; Lee, Kelley

    2011-01-01

    Background Recent attempts by large tobacco companies to represent themselves as socially responsible have been widely dismissed as image management. Existing research supports such claims by pointing to the failings and misleading nature of corporate social responsibility (CSR) initiatives. However, few studies have focused in depth on what tobacco companies hoped to achieve through CSR or reflected on the extent to which these ambitions have been realised. Methods and Findings Iterative searching relating to CSR strategies was undertaken of internal British American Tobacco (BAT) documents, released through litigation in the US. Relevant documents (764) were indexed and qualitatively analysed. In the past decade, BAT has actively developed a wide-ranging CSR programme. Company documents indicate that one of the key aims of this programme was to help the company secure access to policymakers and, thereby, increase the company's chances of influencing policy decisions. Taking the UK as a case study, this paper demonstrates the way in which CSR can be used to renew and maintain dialogue with policymakers, even in ostensibly unreceptive political contexts. In practice, the impact of this political use of CSR is likely to be context specific; depending on factors such as policy élites' understanding of the credibility of companies as a reliable source of information. Conclusions The findings suggest that tobacco company CSR strategies can enable access to and dialogue with policymakers and provide opportunities for issue definition. CSR should therefore be seen as a form of corporate political activity. This underlines the need for broad implementation of Article 5.3 of the Framework Convention on Tobacco Control. Measures are needed to ensure transparency of interactions between all parts of government and the tobacco industry and for policy makers to be made more aware of what companies hope to achieve through CSR. Please see later in the article for the Editors

  9. Corporate social responsibility and access to policy élites: an analysis of tobacco industry documents.

    PubMed

    Fooks, Gary J; Gilmore, Anna B; Smith, Katherine E; Collin, Jeff; Holden, Chris; Lee, Kelley

    2011-08-01

    Recent attempts by large tobacco companies to represent themselves as socially responsible have been widely dismissed as image management. Existing research supports such claims by pointing to the failings and misleading nature of corporate social responsibility (CSR) initiatives. However, few studies have focused in depth on what tobacco companies hoped to achieve through CSR or reflected on the extent to which these ambitions have been realised. Iterative searching relating to CSR strategies was undertaken of internal British American Tobacco (BAT) documents, released through litigation in the US. Relevant documents (764) were indexed and qualitatively analysed. In the past decade, BAT has actively developed a wide-ranging CSR programme. Company documents indicate that one of the key aims of this programme was to help the company secure access to policymakers and, thereby, increase the company's chances of influencing policy decisions. Taking the UK as a case study, this paper demonstrates the way in which CSR can be used to renew and maintain dialogue with policymakers, even in ostensibly unreceptive political contexts. In practice, the impact of this political use of CSR is likely to be context specific; depending on factors such as policy élites' understanding of the credibility of companies as a reliable source of information. The findings suggest that tobacco company CSR strategies can enable access to and dialogue with policymakers and provide opportunities for issue definition. CSR should therefore be seen as a form of corporate political activity. This underlines the need for broad implementation of Article 5.3 of the Framework Convention on Tobacco Control. Measures are needed to ensure transparency of interactions between all parts of government and the tobacco industry and for policy makers to be made more aware of what companies hope to achieve through CSR.

  10. Profiles of the National Industry Skills Standards Projects.

    ERIC Educational Resources Information Center

    Rahn, Mikala L., Comp.

    In an effort to develop a more uniform and comprehensive system of national skill standards, the U.S. Departments of Education and Labor have awarded grants to 22 technical committees, composed of representatives from business, labor, and education, in a variety of industries and occupations. These projects will begin proposing national standards…

  11. Manufacturing (Industrial) Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document contains 35 units to consider for use in a tech prep competency profile for the occupation of manufacturing (industrial) technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific…

  12. Vertical Integration: Corporate Strategy in the Information Industry.

    ERIC Educational Resources Information Center

    Davenport, Lizzie; Cronin, Blaise

    1986-01-01

    Profiles the corporate strategies of three sectors of the information industry and the trend toward consolidation in electronic publishing. Three companies' acquisitions are examined in detail using qualitative data from information industry columns and interpreting it on the basis of game theory. (EM)

  13. Comprehensive chemical characterization of industrial PM2.5 from steel industry activities

    NASA Astrophysics Data System (ADS)

    Sylvestre, Alexandre; Mizzi, Aurélie; Mathiot, Sébastien; Masson, Fanny; Jaffrezo, Jean L.; Dron, Julien; Mesbah, Boualem; Wortham, Henri; Marchand, Nicolas

    2017-03-01

    Industrial sources are among the least documented PM (Particulate Matter) source in terms of chemical composition, which limits our understanding of their effective impact on ambient PM concentrations. We report 4 chemical emission profiles of PM2.5 for multiple activities located in a vast metallurgical complex. Emissions profiles were calculated as the difference of species concentrations between an upwind and a downwind site normalized by the absolute PM2.5 enrichment between both sites. We characterized the PM2.5 emissions profiles of the industrial activities related to the cast iron (complex 1) and the iron ore conversion processes (complex 2), as well as 2 storage areas: a blast furnace slag area (complex 3) and an ore terminal (complex 4). PM2.5 major fractions (Organic Carbon (OC) and Elemental Carbon (EC), major ions), organic markers as well as metals/trace elements are reported for the 4 industrial complexes. Among the trace elements, iron is the most emitted for the complex 1 (146.0 mg g-1 of PM2.5), the complex 2 (70.07 mg g-1) and the complex 3 (124.4 mg g-1) followed by Al, Mn and Zn. A strong emission of Polycyclic Aromatic Hydrocarbons (PAH), representing 1.3% of the Organic Matter (OM), is observed for the iron ore transformation complex (complex 2) which merges the activities of coke and iron sinter production and the blast furnace processes. In addition to unsubstituted PAHs, sulfur containing PAHs (SPAHs) are also significantly emitted (between 0.011 and 0.068 mg g-1) by the complex 2 and could become very useful organic markers of steel industry activities. For the complexes 1 and 2 (cast iron and iron ore converters), a strong fraction of sulfate ranging from 0.284 to 0.336 g g-1) and only partially neutralized by ammonium, is observed indicating that sulfates, if not directly emitted by the industrial activity, are formed very quickly in the plume. Emission from complex 4 (Ore terminal) are characterized by high contribution of Al (125.7 mg

  14. Harm promotion: observations on the symbiosis between government and private industries in Australasia for the development of highly accessible gambling markets.

    PubMed

    Livingstone, Charles; Adams, Peter J

    2011-01-01

    To illustrate ways in which industry control over the gambling market and its regulatory system have enabled rapid proliferation in gambling consumption and harm. To discuss the relationship between government regulation and the accessibility, marketing and technologies of electronic gambling machines in Australia and New Zealand. The regulatory framework for gambling in both countries has encouraged highly accessible,regressively distributed and heavily marketed high-impact electronic gambling machines. This framework has developed in large part through the conjunction of government revenue needs and the adaptation of a folk model of gambling appropriated by gambling businesses and engineered to incorporate a discourse that legitimate their gambling businesses. Governments should be encouraged to invest in 'upstream' public health strategies that contain the economic and social drivers for intensifying gambling consumption. One key aspect involves questioning the most suitable scale, location and marketing of gambling operations, and the reliance of government on gambling revenues (whether directly or as substitution for other government expenditure). Technological solutions to disrupt the development of obsessive gambling habits are also available and are likely to reduce gambling-related harm.

  15. Utilization of Space Station for industrial thermophysical property measurements

    NASA Astrophysics Data System (ADS)

    Overfelt, Tony; Watkins, John

    1996-03-01

    The International Space Station represents the largest cooperative space project in history and will be industry's only reasonable access to the low-g environment for long duration R&D. Such access will provide unique and competitive capabilities to industry if private sector entities can commercially utilize the Space Station for their industrial research programs. The metal casting industry has identified the need for accurate thermophysical properties of molten alloys as a priority need. Research over the last decade has demonstrated that experimental techniques exist to containerlessly measure critical thermophysical and related properties of molten metals for improved process design. This paper describes the ``VULCAN'' concept, a proposed commercial instrument for thermophysical properties measurements on the Space Station. Finally, several issues regarding private sector utilization of the Space Station are also discussed.

  16. Drug repurposing in pharmaceutical industry and its impact on market access: market access implications.

    PubMed

    Murteira, Susana; Millier, Aurélie; Toumi, Mondher

    2014-01-01

    Drug repurposing is a group of development strategies employed in order to overcome some of the hurdles innate to drug research and development. Drug repurposing includes drug repositioning, reformulation and combination. This study aimed to identify the determinants of successful market access outcome for drug repurposing in the United States of America (USA) and in Europe. The case studies of repurposing strategies were identified through a systematic review of the literature. Price information and reimbursement conditions for all the case studies were collected mainly through access of public datasources. A list of attributes that could be associated with market access outcome (price level and reimbursement conditions) was developed, discussed, and validated by an external expert group. Detailed information for all attributes was researched and collected for each case study. Bivariate regression models were conducted to identify factors associated with price change for all repurposing cases. A similar analysis was performed for reformulation and repositioning cases, in the USA and in Europe, separately. A significance level of 5% was used for all analyses. A total of 144 repurposing case studies were included in the statistical analysis for evaluation of mean price change. Combination cases (the combination of two or more individual drug components) were excluded from the statistical analysis due to the low number of cases retrieved. The main attributes associated with a significant price increase for overall repurposing cases were 'change in administration setting to hospital' (374%, p<0.0001), 'addressing unmet needs' (69%, p<0.05), 'reformulations belonging to Group 3'-that is, change in administration route (117%, p<0.001), and being a repurposed product with the 'same brand name' as the original product (65%, p<0.05). We found that the ability of the repurposed product to address unmet needs, a reformulation where the target product had a different

  17. The electric industry's gyrations are giving some telecommunications experts that old familiar feeling

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Graniere, R.J.

    1993-06-15

    A timeline of the past 20 years would characterize an American telecommunications policy revolution dominated by alternating periods of market structure and access. It also would reveal that this cycle is not a casual phenomenon but the result of procompetitive regulatory and judicial decisions that spawn equal and open access issues whose resolution is, in turn, a source of additional market structure issues. Passage of the Energy Policy Act of 1992 has started a similar cogenerative process in the electricity industry. How can electric utility executives and regulators use the lessons of the telecommunications industry to deal with emerging transmissionmore » issues in the electricity industry They can begin by realizing that multiple forms of mandatory transmission access may be new to electric utilities, but they are second nature to telephone local exchange companies (LECs). For example, LECs have been providing local access services to equipment manufacturers and long-distance companies for over a decade. These firms also are deploying local access services for the enhanced and information-services providers under the rubric of open network architecture (ONA). This full range of access services might soon be commonplace in the electricity industry, too, as exempt wholesale generators (EWGs) enter the wholesale power markets.« less

  18. Remoteness and Access to Learning Opportunities in the Pacific Region.

    ERIC Educational Resources Information Center

    Pacific Region Educational Lab., Honolulu, HI.

    The Remoteness and Access to Learning Opportunities in the Pacific Region Study was carried out to investigate whether access to learning opportunities (ALO) is related to the remoteness and isolation of many schools in the Pacific region. The study also profiles the conditions of remote and isolated schools and the ALO for Pacific students. Seven…

  19. An assessment of professionalism on students' Facebook profiles.

    PubMed

    Nason, K N; Byrne, H; Nason, G J; O'Connell, B

    2018-02-01

    With the advent of social media, healthcare professionals not only need to be conscious of professionalism in their face-to-face interactions but also in the electronic environment. The aim of this study was to assess the level of online professionalism on Facebook profiles available for public viewing of students from a dental school. A search was performed via a new Facebook account of all students in the University Dental School (dental hygiene, dental nursing, dental science and dental technology). Profiles were categorised as 'private' or 'public'. Demographic details and photographs/comments of unprofessional behaviour were recorded for each individual Facebook profile. Each profile was subsequently scored with regard to professionalism based on a previously published score. There are a total of 287 students in the dental school. Of these, 62% (n = 177) had a Facebook account. Three per cent (n = 6) had a public account (fully accessible) whilst 97% (n = 171) had a private account (limited access); 36% (n = 63) of students mentioned the dental school/hospital on their profile; 34% (n = 60) had questionable content on their profile whilst 3% (n = 6) had definite violations of professionalism on their profile; and 25% (n = 44) had unprofessional photographs on their profile. Of those with unprofessional content, 52% (n = 23) of these had a documented affiliation with the dental school also visible on their profile. There was a concerning level of unprofessional content visible on students' Facebook profiles. Students need to be fully aware of their professional responsibility in the setting of social media. © 2016 The Authors. European Journal of Dental Education Published by John Wiley & Sons Ltd.

  20. Interface between authorship, industry and science in the domain of therapeutics.

    PubMed

    Healy, David; Cattell, Dinah

    2003-07-01

    Changes in the character of medical authorship. Aims To compare the impact of industry-linked and non-industry linked articles. We compared articles on sertraline being coordinated by a medical writing agency with articles not coordinated in this way. We calculated numbers of Medline-listed articles per author, journal impact factors, literature profiles and citation rates of both sets of articles. Non-agency-linked articles on sertraline had an average of 2.95 authors per article, a mean length of 3.4 pages, a mean Medline listing of 37 articles per author (95% CI 27-47) and a mean literature profile of 283 per article (95% CI 130-435). Agency-linked articles on sertraline had an average of 6.6 authors per article, a mean length of 10.7 pages, a mean Medline listing of 70 articles per author (95% CI 62-79) and a mean literature profile of 1839 per article (95% CI 1076-2602). The citation rate for agency articles was 20.2 (95% CI 13.4-27.0) and for non-agency articles it was 3.7 (95% CI 3.3-8.1). The literature profiles and citation rates of industry-linked and non-industry-linked articles differ. The emerging style of authorship in industry-linked articles can deliver good-quality articles, but it raises concerns for the scientific base of therapeutics.

  1. Comparative evaluation of microbial diversity and metabolite profiles in doenjang, a fermented soybean paste, during the two different industrial manufacturing processes.

    PubMed

    Lee, Sunmin; Lee, Sarah; Singh, Digar; Oh, Ji Young; Jeon, Eun Jung; Ryu, Hyung SeoK; Lee, Dong Wan; Kim, Beom Seok; Lee, Choong Hwan

    2017-04-15

    Two different doenjang manufacturing processes, the industrial process (IP) and the modified industrial process (mIP) with specific microbial assortments, were subjected to metabolite profiling using liquid chromatography-mass spectrometry (LC-MS) and gas chromatography time-of-flight mass spectrometry (GC-TOF-MS). The multivariate analyses indicated that both primary and secondary metabolites exhibited distinct patterns according to the fermentation processes (IP and mIP). Microbial community analysis for doenjang using denaturing gradient gel electrophoresis (DGGE), exhibited that both bacteria and fungi contributed proportionally for each step in the process viz., soybean, steaming, drying, meju fermentation, cooling, brining, and aging. Further, correlation analysis indicated that Aspergillus population was linked to sugar metabolism, Bacillus spp. with that of fatty acids, whereas Tetragenococcus and Zygosaccharomyces were found associated with amino acids. These results suggest that the components and quality of doenjang are critically influenced by the microbial assortments in each process. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Methodology for Localized and Accessible Image Formation and Elucidation

    ERIC Educational Resources Information Center

    Patil, Sandeep R.; Katiyar, Manish

    2009-01-01

    Accessibility is one of the key checkpoints in all software products, applications, and Web sites. Accessibility with digital images has always been a major challenge for the industry. Images form an integral part of certain type of documents and most Web 2.0-compliant Web sites. Individuals challenged with blindness and many dyslexics only make…

  3. Dynamic Analysis of the Temperature and the Concentration Profiles of an Industrial Rotary Kiln Used in Clinker Production.

    PubMed

    Rodrigues, Diulia C Q; Soares, Atílio P; Costa, Esly F; Costa, Andréa O S

    2017-01-01

    Cement is one of the most used building materials in the world. The process of cement production involves numerous and complex reactions that occur under different temperatures. Thus, there is great interest in the optimization of cement manufacturing. Clinker production is one of the main steps of cement production and it occurs inside the kiln. In this paper, the dry process of clinker production is analysed in a rotary kiln that operates in counter flow. The main phenomena involved in clinker production is as follows: free residual water evaporation of raw material, decomposition of magnesium carbonate, decarbonation, formation of C3A and C4AF, formation of dicalcium silicate, and formation of tricalcium silicate. The main objective of this study was to propose a mathematical model that realistically describes the temperature profile and the concentration of clinker components in a real rotary kiln. In addition, the influence of different speeds of inlet gas and solids in the system was analysed. The mathematical model is composed of partial differential equations. The model was implemented in Mathcad (available at CCA/UFES) and solved using industrial input data. The proposal model is satisfactory to describe the temperature and concentration profiles of a real rotary kiln.

  4. Sedimentary profile of polychlorinated biphenyls in the East China Sea: implications for the recent rising emissions from the unintentionally industrial productions

    NASA Astrophysics Data System (ADS)

    Zhao, T.; Guo, Z.

    2017-12-01

    As industrially synthesized chemicals, polychlorinated biphenyls (PCBs) with their predominant anthropogenic origins are effective proxies for the processes of industrialization and urbanization. In this study, sedimentary profiles extracted from locations in the coastal and offshore area of the East China Sea (core C0803: 27°38'N, 121°39'E; core FFJ103: 31°40'N, 125°52'E) were chosen to indicate the chronological distribution of PCB pollutions in China. The concentrations of total PCBs (ΣPCBs) were 0.17-1.21 ng g-1 and 0.19-0.71 ng g-1 respectively in core 0803 and FFj103, the range of which was in the low end of that detected in regions with long PCB application history. The timeline of PCB residues in sediments coincides with the production and use of PCB products in China. PCB concentrations leveled off at the bottoms of the both core sediments and exhibited an obvious peak in periods of 60s-70s. This period corresponds to approximately the time PCBs were first manufactured commercially since 1965 in China. A small dip of ΣPCBs was followed in the early 1980s reflecting the effect of banning on PCB usage in China, after which an exponential escalation at the surface layers was found in these cores. The time-dependent PCB input flux resembles that of PCB concentrations, suggesting a relatively stable depositional environment. As compared to the other studies at most locations, a noticeable increase of ΣPCBs fluxes was consistent with the fact that the significantly rising contributions of unintentionally produced PCBs (UP-PCB) over that made by intentionally produced emissions. Based on the compilation of UP-PCB emissions in China, the UP-PCB emissions started to increase quickly in the early 90s due to the fast and continuously developing cement and steel industries in China. This discrepancy of time pattern in PCB sedimentary profiles is a result of difference in evolution of anthropic activity pressure and economic development.

  5. Access to Bathtub Grab Bars: Evidence of a Policy Gap

    ERIC Educational Resources Information Center

    Birkett, Nicholas; Nair, Rama; Murphy, Maureen; Roberge, Ginette; Lockett, Donna

    2006-01-01

    This paper examines access to bathtub grab bars in privately and publicly owned apartment buildings and explores the profile of seniors who have access to bathtub grab bars. Results indicate that bathtub grab bars were significantly more prevalent in apartments that were publicly owned (91.3%) as compared to privately owned (37.8%) (p lesser than…

  6. An Attribute Based Access Control Framework for Healthcare System

    NASA Astrophysics Data System (ADS)

    Afshar, Majid; Samet, Saeed; Hu, Ting

    2018-01-01

    Nowadays, access control is an indispensable part of the Personal Health Record and supplies for its confidentiality by enforcing policies and rules to ensure that only authorized users gain access to requested resources in the system. In other words, the access control means protecting patient privacy in healthcare systems. Attribute-Based Access Control (ABAC) is a new access control model that can be used instead of other traditional types of access control such as Discretionary Access Control, Mandatory Access Control, and Role-Based Access Control. During last five years ABAC has shown some applications in both recent academic fields and industry purposes. ABAC by using user’s attributes and resources, makes a decision according to an access request. In this paper, we propose an ABAC framework for healthcare system. We use the engine of ABAC for rendering and enforcing healthcare policies. Moreover, we handle emergency situations in this framework.

  7. Phytochemical, phylogenetic, and anti-inflammatory evaluation of 43 Urtica accessions (stinging nettle) based on UPLC-Q-TOF-MS metabolomic profiles.

    PubMed

    Farag, Mohamed A; Weigend, Maximilian; Luebert, Federico; Brokamp, Grischa; Wessjohann, Ludger A

    2013-12-01

    Several species of the genus Urtica (especially Urtica dioica, Urticaceae), are used medicinally to treat a variety of ailments. To better understand the chemical diversity of the genus and to compare different accessions and different taxa of Urtica, 63 leaf samples representing a broad geographical, taxonomical and morphological diversity were evaluated under controlled conditions. A molecular phylogeny for all taxa investigated was prepared to compare phytochemical similarity with phylogenetic relatedness. Metabolites were analyzed via UPLC-PDA-MS and multivariate data analyses. In total, 43 metabolites were identified, with phenolic compounds and hydroxy fatty acids as the dominant substance groups. Principal component analysis (PCA) and hierarchical clustering analysis (HCA) provides a first structured chemotaxonomy of the genus. The molecular data present a highly resolved phylogeny with well-supported clades and subclades. U. dioica is retrieved as both para- and polyphyletic. European members of the U. dioica group and the North American subspecies share a rather similar metabolite profile and were largely retrieved as one, nearly exclusive cluster by metabolite data. This latter cluster also includes - remotely related - Urtica urens, which is pharmaceutically used in the same way as U. dioica. However, most highly supported phylogenetic clades were not retrieved in the metabolite cluster analyses. Overall, metabolite profiles indicate considerable phytochemical diversity in the genus, which largely falls into a group characterized by high contents of hydroxy fatty acids (e.g., most Andean-American taxa) and another group characterized by high contents of phenolic acids (especially the U. dioica-clade). Anti-inflammatory in vitro COX1 enzyme inhibition assays suggest that bioactivity may be predicted by gross metabolic profiling in Urtica. Copyright © 2013. Published by Elsevier Ltd.

  8. Assessing the motor carrier industry and its segments : current and prospective issues, 2006.

    DOT National Transportation Integrated Search

    2006-04-01

    This report updates the Motor Carrier Industry Profile: An Update 2004-2005 to reflect recent changes in the motor carrier industry. This document relies heavily on industry trade journals, company annual reports and other industry surveys as sources...

  9. Drug repurposing in pharmaceutical industry and its impact on market access: market access implications

    PubMed Central

    Murteira, Susana; Millier, Aurélie; Toumi, Mondher

    2014-01-01

    Background Drug repurposing is a group of development strategies employed in order to overcome some of the hurdles innate to drug research and development. Drug repurposing includes drug repositioning, reformulation and combination. Objective This study aimed to identify the determinants of successful market access outcome for drug repurposing in the United States of America (USA) and in Europe. Methods The case studies of repurposing strategies were identified through a systematic review of the literature. Price information and reimbursement conditions for all the case studies were collected mainly through access of public datasources. A list of attributes that could be associated with market access outcome (price level and reimbursement conditions) was developed, discussed, and validated by an external expert group. Detailed information for all attributes was researched and collected for each case study. Bivariate regression models were conducted to identify factors associated with price change for all repurposing cases. A similar analysis was performed for reformulation and repositioning cases, in the USA and in Europe, separately. A significance level of 5% was used for all analyses. Results A total of 144 repurposing case studies were included in the statistical analysis for evaluation of mean price change. Combination cases (the combination of two or more individual drug components) were excluded from the statistical analysis due to the low number of cases retrieved. The main attributes associated with a significant price increase for overall repurposing cases were ‘change in administration setting to hospital’ (374%, p<0.0001), ‘addressing unmet needs’ (69%, p<0.05), ‘reformulations belonging to Group 3’—that is, change in administration route (117%, p<0.001), and being a repurposed product with the ‘same brand name’ as the original product (65%, p<0.05). Conclusion We found that the ability of the repurposed product to address unmet needs

  10. Evidence of Product Differentiation in the Microfinance Industry

    DTIC Science & Technology

    2011-05-09

    financial services, which include deposits and more importantly credit. Access to credit allows the poor to overcome initial capital barriers when...of microfinance provides financial access to the poorest regions of the world and is seen by many as a means of creating self-sustaining markets. The...that as more for- profit MFI enter the microfinance industry, non-profit MFIs will be crowded out, reducing borrowers‟ access to financial services

  11. Accessible solitons of fractional dimension

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhong, Wei-Ping, E-mail: zhongwp6@126.com; Texas A&M University at Qatar, P.O. Box 23874, Doha; Belić, Milivoj

    We demonstrate that accessible solitons described by an extended Schrödinger equation with the Laplacian of fractional dimension can exist in strongly nonlocal nonlinear media. The soliton solutions of the model are constructed by two special functions, the associated Legendre polynomials and the Laguerre polynomials in the fraction-dimensional space. Our results show that these fractional accessible solitons form a soliton family which includes crescent solitons, and asymmetric single-layer and multi-layer necklace solitons. -- Highlights: •Analytic solutions of a fractional Schrödinger equation are obtained. •The solutions are produced by means of self-similar method applied to the fractional Schrödinger equation with parabolic potential.more » •The fractional accessible solitons form crescent, asymmetric single-layer and multilayer necklace profiles. •The model applies to the propagation of optical pulses in strongly nonlocal nonlinear media.« less

  12. Failure Analysis of Network Based Accessible Pedestrian Signals in Closed-Loop Operation

    DOT National Transportation Integrated Search

    2011-03-01

    The potential failure modes of a network based accessible pedestrian system were analyzed to determine the limitations and benefits of closed-loop operation. The vulnerabilities of the system are accessed using the industry standard process known as ...

  13. Sanitizing Rhetorics of the Commercial Blood Plasma Industry.

    ERIC Educational Resources Information Center

    Anderson, Leon; Moser, Christina

    The United States blood plasma industry uses various rhetorics to access donors and markets its products while managing its stigma and potential legal liability. The industry includes both the public "nonprofit" sector and the private, for-profit blood collection and manufacturing businesses owned by pharmaceutical companies that rely on…

  14. SOURCE SAMPLING FINE PARTICULATE MATTER: WOOD-FIRED INDUSTRIAL BOILER

    EPA Science Inventory

    The report provides a profile for a wood-fired industrial boiler equipped with a multistage electrostatic precipitator control device. Along with the profile of emissions of fine particulate matter of aerodynamic diameter of 2.5 micrometers or less (PM-2.5), data are also provide...

  15. Optical Access Networks

    NASA Astrophysics Data System (ADS)

    Zheng, Jun; Ansari, Nirwan

    2005-03-01

    Call for Papers: Optical Access Networks With the wide deployment of fiber-optic technology over the past two decades, we have witnessed a tremendous growth of bandwidth capacity in the backbone networks of today's telecommunications infrastructure. However, access networks, which cover the "last-mile" areas and serve numerous residential and small business users, have not been scaled up commensurately. The local subscriber lines for telephone and cable television are still using twisted pairs and coaxial cables. Most residential connections to the Internet are still through dial-up modems operating at a low speed on twisted pairs. As the demand for access bandwidth increases with emerging high-bandwidth applications, such as distance learning, high-definition television (HDTV), and video on demand (VoD), the last-mile access networks have become a bandwidth bottleneck in today's telecommunications infrastructure. To ease this bottleneck, it is imperative to provide sufficient bandwidth capacity in the access networks to open the bottleneck and thus present more opportunities for the provisioning of multiservices. Optical access solutions promise huge bandwidth to service providers and low-cost high-bandwidth services to end users and are therefore widely considered the technology of choice for next-generation access networks. To realize the vision of optical access networks, however, many key issues still need to be addressed, such as network architectures, signaling protocols, and implementation standards. The major challenges lie in the fact that an optical solution must be not only robust, scalable, and flexible, but also implemented at a low cost comparable to that of existing access solutions in order to increase the economic viability of many potential high-bandwidth applications. In recent years, optical access networks have been receiving tremendous attention from both academia and industry. A large number of research activities have been carried out or

  16. Profiles of traveler information services, update 2007.

    DOT National Transportation Integrated Search

    2007-07-01

    Profiles of 511 Traveler Information Services Update 2007 was prepared by the Federal Transit Administrations (FTA) Office of Research, Demonstration and Innovation to increase public awareness, access, and knowledge of the transit content within ...

  17. Highlights: US Commercial Remote Sensing Industry Analysis

    NASA Technical Reports Server (NTRS)

    Rabin, Ron

    2002-01-01

    This viewgraph presentation profiles the US remote sensing industry based on responses to a survey by 1450 industry professionals. The presentation divides the industry into three sectors: academic, commercial, and government; the survey results from each are covered in a section of the presentation. The presentation also divides survey results on user needs into the following sectors: spatial resolution, geolocation accuracy; elevation accuracy, area coverage, imagery types, and timeliness. Data, information, and software characteristics are also covered in the presentation.

  18. Term limits and the tobacco industry.

    PubMed

    Apollonio, Dorie E; Glantz, Stanton A; Bero, Lisa A

    2014-03-01

    In the 1990s several American states passed term limits on legislators with the stated intention of reducing the influence of wealthy industries on career legislators. Although term limits in the United States do not have a direct relationship to public health, the tobacco industry anticipated that term limits could have indirect effects by either limiting or expanding industry influence. We detail the strategy of the tobacco industry in the wake of term limits using internal tobacco company documents and a database of campaign contributions made to legislators in term limited states between 1988 and 2002. Despite some expectations that term limits would limit tobacco industry access to state legislators, term limits appear to have had the opposite effect. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Optical Access Networks

    NASA Astrophysics Data System (ADS)

    Zheng, Jun; Ansari, Nirwan

    2005-06-01

    Call for Papers: Optical Access Networks With the wide deployment of fiber-optic technology over the past two decades, we have witnessed a tremendous growth of bandwidth capacity in the backbone networks of today's telecommunications infrastructure. However, access networks, which cover the "last-mile" areas and serve numerous residential and small business users, have not been scaled up commensurately. The local subscriber lines for telephone and cable television are still using twisted pairs and coaxial cables. Most residential connections to the Internet are still through dial-up modems operating at a low speed on twisted pairs. As the demand for access bandwidth increases with emerging high-bandwidth applications, such as distance learning, high-definition television (HDTV), and video on demand (VoD), the last-mile access networks have become a bandwidth bottleneck in today's telecommunications infrastructure. To ease this bottleneck, it is imperative to provide sufficient bandwidth capacity in the access networks to open the bottleneck and thus present more opportunities for the provisioning of multiservices. Optical access solutions promise huge bandwidth to service providers and low-cost high-bandwidth services to end users and are therefore widely considered the technology of choice for next-generation access networks. To realize the vision of optical access networks, however, many key issues still need to be addressed, such as network architectures, signaling protocols, and implementation standards. The major challenges lie in the fact that an optical solution must be not only robust, scalable, and flexible, but also implemented at a low cost comparable to that of existing access solutions in order to increase the economic viability of many potential high-bandwidth applications. In recent years, optical access networks have been receiving tremendous attention from both academia and industry. A large number of research activities have been carried out or

  20. Optical Access Networks

    NASA Astrophysics Data System (ADS)

    Zheng, Jun; Ansari, Nirwan; Jersey Inst Ansari, New; Jersey Inst, New

    2005-04-01

    Call for Papers: Optical Access Networks With the wide deployment of fiber-optic technology over the past two decades, we have witnessed a tremendous growth of bandwidth capacity in the backbone networks of today's telecommunications infrastructure. However, access networks, which cover the "last-mile" areas and serve numerous residential and small business users, have not been scaled up commensurately. The local subscriber lines for telephone and cable television are still using twisted pairs and coaxial cables. Most residential connections to the Internet are still through dial-up modems operating at a low speed on twisted pairs. As the demand for access bandwidth increases with emerging high-bandwidth applications, such as distance learning, high-definition television (HDTV), and video on demand (VoD), the last-mile access networks have become a bandwidth bottleneck in today's telecommunications infrastructure. To ease this bottleneck, it is imperative to provide sufficient bandwidth capacity in the access networks to open the bottleneck and thus present more opportunities for the provisioning of multiservices. Optical access solutions promise huge bandwidth to service providers and low-cost high-bandwidth services to end users and are therefore widely considered the technology of choice for next-generation access networks. To realize the vision of optical access networks, however, many key issues still need to be addressed, such as network architectures, signaling protocols, and implementation standards. The major challenges lie in the fact that an optical solution must be not only robust, scalable, and flexible, but also implemented at a low cost comparable to that of existing access solutions in order to increase the economic viability of many potential high-bandwidth applications. In recent years, optical access networks have been receiving tremendous attention from both academia and industry. A large number of research activities have been carried out or

  1. Optical Access Networks

    NASA Astrophysics Data System (ADS)

    Zheng, Jun; Ansari, Nirwan

    2005-05-01

    Call for Papers: Optical Access Networks With the wide deployment of fiber-optic technology over the past two decades, we have witnessed a tremendous growth of bandwidth capacity in the backbone networks of today's telecommunications infrastructure. However, access networks, which cover the "last-mile" areas and serve numerous residential and small business users, have not been scaled up commensurately. The local subscriber lines for telephone and cable television are still using twisted pairs and coaxial cables. Most residential connections to the Internet are still through dial-up modems operating at a low speed on twisted pairs. As the demand for access bandwidth increases with emerging high-bandwidth applications, such as distance learning, high-definition television (HDTV), and video on demand (VoD), the last-mile access networks have become a bandwidth bottleneck in today's telecommunications infrastructure. To ease this bottleneck, it is imperative to provide sufficient bandwidth capacity in the access networks to open the bottleneck and thus present more opportunities for the provisioning of multiservices. Optical access solutions promise huge bandwidth to service providers and low-cost high-bandwidth services to end users and are therefore widely considered the technology of choice for next-generation access networks. To realize the vision of optical access networks, however, many key issues still need to be addressed, such as network architectures, signaling protocols, and implementation standards. The major challenges lie in the fact that an optical solution must be not only robust, scalable, and flexible, but also implemented at a low cost comparable to that of existing access solutions in order to increase the economic viability of many potential high-bandwidth applications. In recent years, optical access networks have been receiving tremendous attention from both academia and industry. A large number of research activities have been carried out or

  2. The risk typology of healthcare access and its association with unmet healthcare needs in Asian Americans.

    PubMed

    Jang, Yuri; Park, Nan Sook; Yoon, Hyunwoo; Huang, Ya-Ching; Rhee, Min-Kyoung; Chiriboga, David A; Kim, Miyong T

    2018-01-01

    Using data from the 2015 Asian American Quality of Life Survey (N = 2,609), latent profile analysis was conducted on general (health insurance, usual place for care and income) and immigrant-specific (nativity, length of stay in the U.S., English proficiency and acculturation) risk factors of healthcare access. Latent profile analysis identified a three-cluster model (low-risk, moderate-risk and high-risk groups). Compared with the low-risk group, the odds of having an unmet healthcare need was 1.52 times greater in the moderate-risk group and 2.24 times greater in the high-risk group. Challenging the myth of model minority, the present sample of Asian Americans demonstrates its vulnerability in access to healthcare. Findings also show the heterogeneity in healthcare access risk profiles. © 2017 John Wiley & Sons Ltd.

  3. Entrepreneurship. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for entrepreneurship. The list contains units (with and without subunits), competencies, and competency builders that…

  4. Electronics. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

  5. Masonry. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) for masonry occupations contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability…

  6. Horticulture. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

  7. Carpentry. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

  8. Masonry. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for masonry occupations. The list contains units (with and without subunits), competencies, and competency builders that…

  9. Local health department activities to ensure access to care.

    PubMed

    Luo, Huabin; Sotnikov, Sergey; Shah, Gulzar

    2013-12-01

    Local health departments (LHDs) can play an important role in linking people to personal health services and ensuring the provision of health care when it is otherwise unavailable. However, the extent to which LHDs are involved in ensuring access to health care in its jurisdictions is not well known. To provide nationally representative estimates of LHD involvement in specific activities to ensure access to healthcare services and to assess their association with macro-environment/community and LHD capacity and process characteristics. Data used were from the 2010 National Profile of Local Health Departments Study, Area Resource Files, and the Association of State and Territorial Health Officials' 2010 Profile of State Public Health Agencies Survey. Data were analyzed in 2012. Approximately 66.0% of LHDs conducted activities to ensure access to medical care, 45.9% to dental care, and 32.0% to behavioral health care. About 28% of LHDs had not conducted activities to ensure access to health care in their jurisdictions in 2010. LHDs with higher per capita expenditures and larger jurisdiction population sizes were more likely to provide access to care services (p <0.05). There is substantial variation in LHD engagement in activities to ensure access to care. Differences in LHD capacity and the needs of the communities in which they are located may account for this variation. Further research is needed to determine whether this variation is associated with adverse population health outcomes. © 2013 American Journal of Preventive Medicine Published by American Journal of Preventive Medicine All rights reserved.

  10. Country profile: Hungary

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-09-01

    Country Profile: Hungary has been prepared as a background document for use by US Government agencies and US businesses interested in becoming involved with the new democracies of Eastern Europe as they pursue sustainable economic development. The focus of the Profile is on energy and highlights information on Hungary`s energy supply, demand, and utilization. It identifies patterns of energy usage in the important economic sectors, especially industry, and provides a preliminary assessment for opportunities to improve efficiencies in energy production, distribution and use by introducing more efficient technologies. The use of more efficient technologies would have the added benefit ofmore » reducing the environmental impact which, although is not the focus of the report, is an issue that effects energy choices. The Profile also presents considerable economic information, primarily in the context of how economic restructuring may affect energy supply, demand, and the introduction of more efficient technologies.« less

  11. Country profile: Hungary

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-09-01

    Country Profile: Hungary has been prepared as a background document for use by US Government agencies and US businesses interested in becoming involved with the new democracies of Eastern Europe as they pursue sustainable economic development. The focus of the Profile is on energy and highlights information on Hungary's energy supply, demand, and utilization. It identifies patterns of energy usage in the important economic sectors, especially industry, and provides a preliminary assessment for opportunities to improve efficiencies in energy production, distribution and use by introducing more efficient technologies. The use of more efficient technologies would have the added benefit ofmore » reducing the environmental impact which, although is not the focus of the report, is an issue that effects energy choices. The Profile also presents considerable economic information, primarily in the context of how economic restructuring may affect energy supply, demand, and the introduction of more efficient technologies.« less

  12. Drafting. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Drafting Occupational Competency Analysis Profile (OCAP) is one of a series of competency lists, verified by expert workers, that have evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives from throughout Ohio. This OCAP identifies the…

  13. Accounting. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Accounting Occupational Competency Analysis Profile (OCAP) is one of a series of competency lists, verified by expert workers, that have evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives from throughout Ohio. This OCAP identifies the…

  14. Horticulture. Tech Prep Competency Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Wooster. Agricultural Technical Inst.

    This tech prep competency profile (TCP), which was developed by a consortium of Ohio educators and business/industry representatives, lists the competencies that have been identified as necessary for employment in the following occupations: nursery technician; golf course superintendent; landscape designer/manager; lawn care specialist; tree care…

  15. 77 FR 60962 - Clean Water Act; Contractor Access to Confidential Business Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-05

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 2 [FRL-9733-8] Clean Water Act; Contractor Access to... transfer of confidential business information to contractor, subcontractors, and consultants. SUMMARY: The... certain industries. We have determined that the contractors listed below require access [[Page 60963

  16. 75 FR 60452 - Clean Water Act; Contractor Access to Confidential Business Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-30

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9208-9] Clean Water Act; Contractor Access to Confidential... electric industry to a new subcontractor of a contractor, Eastern Research Group (ERG). EPA previously... contractors and subcontractors to access information necessary to support EPA in the planning, development...

  17. Effects of geodemographic profiles on healthcare service utilization: a case study on cardiac care in Ontario, Canada

    PubMed Central

    2013-01-01

    Background Although literature has associated geodemographic factors with healthcare service utilization, little is known about how these factors — such as population size, age profile, service accessibility, and educational profile — interact to influence service utilization. This study fills this gap in the literature by examining both the direct and the moderating effects of geodemographic profiles on the utilization of cardiac surgery services. Methods We aggregated secondary data obtained from Statistics Canada and Cardiac Care Network of Ontario to derive the geodemographic profiles of Ontario and the corresponding cardiac surgery service utilization in the years between 2004 and 2007. We conducted a two-step test using Partial Least Squares-based structural equation modeling to investigate the relationships between geodemographic profiles and healthcare service utilization. Results Population size and age profile have direct positive effects on service utilization (β=0.737, p<0.01; β=0.284, p<0.01, respectively), whereas service accessibility is negatively associated with service utilization (β=−0.210, p<0.01). Service accessibility decreases the effect of population size on service utilization (β=−0.606, p<0.01), and educational profile weakens the effects of population size and age profile on service utilization (β=−0.595, p<0.01; β=−0.286, p<0.01, respectively). Conclusions In this study, we found that (1) service accessibility has a moderating effect on the relationship between population size and service utilization, and (2) educational profile has moderating effects on both the relationship between population size and service utilization, and the relationship between age profile and service utilization. Our findings suggest that reducing regional disparities in healthcare service utilization should take into account the interaction of geodemographic factors such as service accessibility and education. In addition, the allocation of

  18. Environment Information ACCESS, Volume 1 Number 15.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service covering published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  19. Environment Information ACCESS, Volume 1 Number 7.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service covering published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  20. Environment Information ACCESS, Volume 1 Number 16.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service covering published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  1. 2012 Mask Industry Survey

    NASA Astrophysics Data System (ADS)

    Malloy, Matt; Litt, Lloyd C.

    2012-11-01

    A survey supported by SEMATECH and administered by David Powell Consulting was sent to semiconductor industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. 2012 marks the 11th consecutive year for the mask industry survey. This year's survey and reporting structure are similar to those of the previous years with minor modifications based on feedback from past years and the need to collect additional data on key topics. Categories include general mask information, mask processing, data and write time, yield and yield loss, delivery times, and maintenance and returns. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the mask industry. Results, initial observations, and key comparisons between the 2011 and 2012 survey responses are shown here, including multiple indications of a shift towards the manufacturing of higher end photomasks.

  2. Environment Information ACCESS, Volume 2 Number 8.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    "Access" is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  3. Environment Information ACCESS, Volume 1 Number 3.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  4. Environment Information ACCESS, Volume 1 Number 21 .

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  5. Environment Information ACCESS, Volume 1 Number 2.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  6. Environment Information ACCESS, Volume 1 Number 17.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  7. Environment Information ACCESS, Volume 1 Number 8.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  8. Environment Information ACCESS, Volume 1 Number 6.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  9. Environment Information ACCESS, Volume 1 Number 4.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  10. Environment Information ACCESS, Volume 2 Number 12.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    ACCESS is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  11. Environment Information ACCESS, Volume 2 Number 6.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  12. Environment Information ACCESS, Volume 1 Number 5.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  13. Environment Information ACCESS, Volume 2 Number 7.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  14. Environment Information ACCESS, Volume 2 Number 19.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    ACCESS is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  15. Environment Information ACCESS, Volume 2 Number 9.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    "Access" is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  16. Environment Information ACCESS, Volume 2 Number 4.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  17. Environment Information ACCESS, Volume 2 Number 17.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    ACCESS is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  18. Environment Information ACCESS, Volume 1 Number 1.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  19. Environment Information ACCESS, Volume 1 Number 22.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  20. Environment Information ACCESS, Volume 1 Number 10.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  1. Environment Information ACCESS, Volume 1 Number 19.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  2. Environment Information ACCESS, Volume 1 Number 18.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  3. Environment Information ACCESS, Volume 2 Number 5.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  4. Environment Information ACCESS, Volume 2 Number 20.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    ACCESS is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  5. Environment Information ACCESS, Volume 2 Number 11.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    "Access" is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  6. Environment Information ACCESS, Volume 1 Number 9.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  7. Environment Information ACCESS, Volume 2 Number 21.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    ACCESS is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  8. Environment Information ACCESS, Volume 2 Number 3.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  9. Environment Information ACCESS, Volume 2 Number 2.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1,000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  10. Environment Information ACCESS, Volume 2 Number 1.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  11. Environment Information ACCESS, Volume 2 Number 18.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    ACCESS is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  12. Environment Information ACCESS, Volume 1 Number 20.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  13. Environment Information ACCESS, Volume 2 Number 10.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    ACCESS is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  14. Assessing the impact of industrial source emissions on atmospheric carbonaceous aerosol concentrations using routine monitoring networks.

    PubMed

    Sheesley, Rebecca J; Schauer, James J; Orf, Marya L

    2010-02-01

    Industrial sources can have a significant but poorly defined impact on ambient particulate matter concentrations in select areas. Detailed emission profiles are often not available and are hard to develop because of the diversity of emissions across time and space at large industrial complexes. A yearlong study was conducted in an industrial area in Detroit, MI, which combined real-time particle mass (tapered element oscillating microbalance) and black carbon (aetholometer) measurements with molecular marker measurements of monthly average concentrations as well as daily concentrations of select high pollution days. The goal of the study was to use the real-time data to define days in which the particulate matter concentration in the atmosphere was largely impacted by local source emissions and to use daily speciation data to derive emission profiles for the industrial source. When combined with motor vehicle exhaust, wood smoke and road dust profiles, the industrial source profile was used to determine the contribution of the local industrial source to the total organic carbon (OC) concentrations using molecular marker-chemical mass balance modeling (MM-CMB). The MM-CMB analysis revealed that the industrial source had minimal impact on the monthly average carbonaceous aerosol concentration, but contributed approximately 2 microg m(-3), or a little over one-third of the total OC, on select high-impact days.

  15. The Structure of the Computer Industry

    DTIC Science & Technology

    1992-03-01

    the user and written for pay by employees . The entry of computing power into mass markets and the emergence of the software industry in the late 1970s...use of improper means, there would be difficulties in acquiring the information.. .Protection is not based on a policy of rewarding or otherwise 74...2). In the computer industry, the most frequently litigated trade secret case occurs when an employee who has access to an employer’s trade secrets

  16. Profiles of 511 traveler information services update 2008.

    DOT National Transportation Integrated Search

    2008-07-01

    Profiles of 511 Traveler Information Services Update 2008 was prepared by the Federal Transit : Administrations (FTA) Office of Research, Demonstration and Innovation to increase public : awareness, access, and knowledge of the transit content wit...

  17. Profiles of 511 traveler information services update 2009.

    DOT National Transportation Integrated Search

    2009-04-01

    Profiles of 511 Traveler Information Services Update 2009 was prepared by the Federal Transit Administrations (FTA) Office of Research, Demonstration and Innovation to increase public awareness, access, and knowledge of the transit content within ...

  18. Accessing external innovation in drug discovery and development.

    PubMed

    Tufféry, Pierre

    2015-06-01

    A decline in the productivity of the pharmaceutical industry research and development (R&D) pipeline has highlighted the need to reconsider the classical strategies of drug discovery and development, which are based on internal resources, and to identify new means to improve the drug discovery process. Accepting that the combination of internal and external ideas can improve innovation, ways to access external innovation, that is, opening projects to external contributions, have recently been sought. In this review, the authors look at a number of external innovation opportunities. These include increased interactions with academia via academic centers of excellence/innovation centers, better communication on projects using crowdsourcing or social media and new models centered on external providers such as built-to-buy startups or virtual pharmaceutical companies. The buzz for accessing external innovation relies on the pharmaceutical industry's major challenge to improve R&D productivity, a conjuncture favorable to increase interactions with academia and new business models supporting access to external innovation. So far, access to external innovation has mostly been considered during early stages of drug development, and there is room for enhancement. First outcomes suggest that external innovation should become part of drug development in the long term. However, the balance between internal and external developments in drug discovery can vary largely depending on the company strategies.

  19. Performance Profiles of Major Energy Producers

    EIA Publications

    2011-01-01

    The information and analyses in Performance Profiles of Major Energy Producers is intended to provide a critical review, and promote an understanding, of the possible motivations and apparent consequences of investment decisions made by some of the largest corporations in the energy industry.

  20. Tobacco industry manipulation of the hospitality industry to maintain smoking in public places

    PubMed Central

    Dearlove, J; Bialous, S; Glantz, S

    2002-01-01

    Objective: To describe how the tobacco industry used the "accommodation" message to mount an aggressive and effective worldwide campaign to recruit hospitality associations, such as restaurant associations, to serve as the tobacco industry's surrogate in fighting against smoke-free environments. Methods: We analysed tobacco industry documents publicly available on the internet as a result of litigation in the USA. Documents were accessed between January and November 2001. Results: The tobacco industry, led by Philip Morris, made financial contributions to existing hospitality associations or, when it did not find an association willing to work for tobacco interests, created its own "association" in order to prevent the growth of smoke-free environments. The industry also used hospitality associations as a vehicle for programmes promoting "accommodation" of smokers and non-smokers, which ignore the health risks of second hand smoke for employees and patrons of hospitality venues. Conclusion: Through the myth of lost profits, the tobacco industry has fooled the hospitality industry into embracing expensive ventilation equipment, while in reality 100% smoke-free laws have been shown to have no effect on business revenues, or even to improve them. The tobacco industry has effectively turned the hospitality industry into its de facto lobbying arm on clean indoor air. Public health advocates need to understand that, with rare exceptions, when they talk to organised restaurant associations they are effectively talking to the tobacco industry and must act accordingly. PMID:12034999

  1. Corporate social responsibility to improve access to medicines: the case of Brazil.

    PubMed

    Thorsteinsdóttir, Halla; Ovtcharenko, Natasha; Kohler, Jillian Clare

    2017-02-21

    Access to medicines and the development of a strong national pharmaceutical industry are two longstanding pillars of health policy in Brazil. This is reflected in a clear emphasis by Brazil's Federal Government on improving access to medicine in national health plans and industrial policies aimed at promoting domestic pharmaceutical development. This research proposes that such policies may act as incentives for companies to pursue a strategic Corporate Social Responsibility (CSR) agenda. CSR that supports Governmental priorities could help companies to benefit significantly from the Governmental industrial policy. We sought to determine whether CSR activities of Brazilian pharmaceutical firms are currently aligned with the Federal Government's health prioritization. To do so we examined key Brazilian health related policies since 2004, including the specific priorities of Brazil's 2012-2015 Health Plan, and compared these with CSR initiatives that are reported on the websites of select pharmaceutical firms in Brazil. Brazil's national health plans and industrial policies demonstrated that the Federal Government has followed diverse approaches for improving access to medicines, including strengthening health care infrastructure, increasing transparency, and supporting product development partnerships. Case studies of six pharmaceutical firms, representing both public and private companies of varying size, support the perspective that CSR is a priority for firms. However, while many programs target issues such as health infrastructure, health care training, and drug donation, more programs focus on areas other than health and do not seem to be connected to Governmental prioritization. This research suggests that there are loose connections between Governmental priorities and pharmaceutical firm CSR. However, there remains a significant opportunity for greater alignment, which could improve access to medicines in the country and foster a stronger relationship between

  2. Better gas tight access doors for power plants

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rutledge, C.K.; Emsbo, J.

    1996-12-31

    This paper presents useful information concerning access doors for equipment at power plants and similar industries. Such doors are used for: Boilers and Boiler Penthouses Economizers and Air Heaters Gas Ducts and Precipitators Baghouses, Absorbers and Stacks. Easy access into such equipment by personnel enhances the speed and thoroughness with which inspections and maintenance tasks are performed. This paper shows how to select and correctly install new doors or replace older models which may cumbersome to operate or unable to seal properly. Good, gas tight access doors should not be overlooked as a contributor to top performance at power plants.more » Loss of efficiency or interior deterioration due to leakage are obvious targets and should be of prime concern. However, the ease of access may be equally important. Lasting reliability of any type of industrial equipment is usually a function of two things: First, the quality and care in design, manufacture and installation. Second, the ability and dedication to maintain the equipment. If the ability or dedication to maintain the equipment is diminished it will impact on the lasting reliability of even the best designed equipment. Extensive engineering efforts, many pages of specifications and large sums of money are used on new power plants to assure practical, adequate and safe access to all parts of the equipment. Many times this is in stark contrast to the money and efforts used on the access doors, through which personnel has to enter for inspection and maintenance. This paper highlights the basic functions which should be expected from all types of access doors. The special functions which should be expected from all types of access doors. The special functions required by individual door types are also explained. This includes all the door types serving the different applications all the way along the gas passage from the high temperature boiler doors to the corrosion resistant doors for absorbers and

  3. Regional elevator survey : grain transportation & industry trends for Great Plains elevators

    DOT National Transportation Integrated Search

    2001-08-01

    One potential means for gaining insight into the current state of the elevator industry, : and into expectations for future trends, is through a survey. The objective of this study is to profile the transportation and industry characteristics of the ...

  4. Policy-based secure communication with automatic key management for industrial control and automation systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chernoguzov, Alexander; Markham, Thomas R.; Haridas, Harshal S.

    A method includes generating at least one access vector associated with a specified device in an industrial process control and automation system. The specified device has one of multiple device roles. The at least one access vector is generated based on one or more communication policies defining communications between one or more pairs of devices roles in the industrial process control and automation system, where each pair of device roles includes the device role of the specified device. The method also includes providing the at least one access vector to at least one of the specified device and one ormore » more other devices in the industrial process control and automation system in order to control communications to or from the specified device.« less

  5. Leadership profiles of senior nurse executives.

    PubMed

    Hemman, E A

    2000-01-01

    As hospitals reorganize to meet the demand for accessible, cost-effective quality healthcare, nursing's active participation as part of the top management team is vital. The purpose of this study was to describe the leadership profiles of four senior nurse executives and determine their congruence with the theoretical perspectives of the stratified systems theory. A multiple case study methodology was employed to develop individual and group leadership profiles through related experiences obtained during an interview, the organization's expectations based on their job descriptions, and a survey of their self-perceptions of how they spent most of their time. The findings indicated that the executives' leadership behavior was consistent with the theory in that they reported more frequent leadership behaviors at the strategic domain, less activity at the organizational domain, and infrequent activity at the production domain. Individual profiles were uniformly consistent with the group profile.

  6. Occupational Profiles in Environmental Protection.

    ERIC Educational Resources Information Center

    CEDEFOP Flash, 1993

    1993-01-01

    Two pilot projects on environmental profiles in the chemical and metal industries and in the public sector were conducted in four countries. Two aspects were studied: job requirements in selected enterprises and departments of the civil service and the occupational competencies of the staff carrying out these tasks. Studies on the chemical and…

  7. Environmental Management. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

  8. Practical Nursing. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for practical nursing. The list contains units (with and without subunits), competencies, and competency builders that…

  9. Dental Assistant. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for dental assistants. The list contains units (with and without subunits), competencies, and competency builders that…

  10. Marketing Management. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

  11. Electrical Trades. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for electrical trades. The list contains units (with and without subunits), competencies, and competency builders that…

  12. Meat Processor. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for meat processing occupations. The list contains units (with and without subunits), competencies, and competency builders…

  13. Resource Conservation. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for resource conservation occupations. The list contains units (with and without subunits), competencies, and competency…

  14. Agricultural Production. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This list consists of essential competencies from the following specialized Ohio Competency Analysis Profiles: Beef and Sheep Producers; Crop Producer; Dairy Producer; Poultry Producer; and Swine Producer. Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives…

  15. 78 FR 27115 - Draft Guidance for Industry on Expanded Access to Investigational Drugs for Treatment Use...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-09

    ... a more transparent process by increasing awareness and knowledge of expanded access programs and the... regulations. Consistent with the goal of making expanded access processes more transparent, FDA is providing... (IRB) review and approval required for individual patient expanded access?'' In the draft guidance, FDA...

  16. Best Practices in School-to-Careers: The Home Building Industry.

    ERIC Educational Resources Information Center

    National Employer Leadership Council, Washington, DC.

    This document highlights the school-to-careers (STC) partnerships connecting workplace experiences to classroom learning to prepare students for successful employment in the home building industry. First, the current state of the home building industry is reviewed. Next, the following organizations and employers are profiled: (1) the National…

  17. 15 CFR 4a.8 - Access to classified information by individuals outside the Government.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Commerce CLASSIFICATION, DECLASSIFICATION, AND PUBLIC AVAILABILITY OF NATIONAL SECURITY INFORMATION § 4a.8 Access to classified information by individuals outside the Government. (a) Industrial, Educational, and Commercial Entities. Certain bidders, contractors, grantees, educational, scientific, or industrial...

  18. Competences of Engineers in the Iron and Steel Industry

    NASA Astrophysics Data System (ADS)

    Kozhevnikov, A. V.

    2017-12-01

    The article presents the results of assessment of the professional performance of engineers working in the iron and steel industry. A competence-based profile of highly-qualified professionals has been built. The study of the competences of the iron and steel industry engineers has shown that their knowledge and skills may be mobilized to solve professional tasks.

  19. Fallon, Nevada FORGE Seismic Reflection Profiles

    DOE Data Explorer

    Blankenship, Doug; Faulds, James; Queen, John; Fortuna, Mark

    2018-02-01

    Newly reprocessed Naval Air Station Fallon (1994) seismic lines: pre-stack depth migrations, with interpretations to support the Fallon FORGE (Phase 2B) 3D Geologic model. Data along seven profiles (>100 km of total profile length) through and adjacent to the Fallon site were re-processed. The most up-to-date, industry-tested seismic processing techniques were utilized to improve the signal strength and coherency in the sedimentary, volcanic, and Mesozoic crystalline basement sections, in conjunction with fault diffractions in order to improve the identification and definition of faults within the study area.

  20. Nurse Aide. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for nurses' aides. The list contains units (with and without subunits), competencies, and competency builders that identify…

  1. Argonne Collaborative Center for Energy Storage Science (ACCESS)

    Science.gov Websites

    Analysis and Diagnostics Laboratory (EADL) Post- Test Facility Access Proven Capabilities Argonne has Analysis, Modeling and Prototyping (CAMP) Electrochemical Analysis and Diagnostics Laboratory (EADL) Post -Test Facility Argonne User Facilities Industries Transportation Consumer Electronics Defense Electric

  2. Integration of EGA secure data access into Galaxy.

    PubMed

    Hoogstrate, Youri; Zhang, Chao; Senf, Alexander; Bijlard, Jochem; Hiltemann, Saskia; van Enckevort, David; Repo, Susanna; Heringa, Jaap; Jenster, Guido; J A Fijneman, Remond; Boiten, Jan-Willem; A Meijer, Gerrit; Stubbs, Andrew; Rambla, Jordi; Spalding, Dylan; Abeln, Sanne

    2016-01-01

    High-throughput molecular profiling techniques are routinely generating vast amounts of data for translational medicine studies. Secure access controlled systems are needed to manage, store, transfer and distribute these data due to its personally identifiable nature. The European Genome-phenome Archive (EGA) was created to facilitate access and management to long-term archival of bio-molecular data. Each data provider is responsible for ensuring a Data Access Committee is in place to grant access to data stored in the EGA. Moreover, the transfer of data during upload and download is encrypted. ELIXIR, a European research infrastructure for life-science data, initiated a project (2016 Human Data Implementation Study) to understand and document the ELIXIR requirements for secure management of controlled-access data. As part of this project, a full ecosystem was designed to connect archived raw experimental molecular profiling data with interpreted data and the computational workflows, using the CTMM Translational Research IT (CTMM-TraIT) infrastructure http://www.ctmm-trait.nl as an example. Here we present the first outcomes of this project, a framework to enable the download of EGA data to a Galaxy server in a secure way. Galaxy provides an intuitive user interface for molecular biologists and bioinformaticians to run and design data analysis workflows. More specifically, we developed a tool -- ega_download_streamer - that can download data securely from EGA into a Galaxy server, which can subsequently be further processed. This tool will allow a user within the browser to run an entire analysis containing sensitive data from EGA, and to make this analysis available for other researchers in a reproducible manner, as shown with a proof of concept study.  The tool ega_download_streamer is available in the Galaxy tool shed: https://toolshed.g2.bx.psu.edu/view/yhoogstrate/ega_download_streamer.

  3. Integration of EGA secure data access into Galaxy

    PubMed Central

    Hoogstrate, Youri; Zhang, Chao; Senf, Alexander; Bijlard, Jochem; Hiltemann, Saskia; van Enckevort, David; Repo, Susanna; Heringa, Jaap; Jenster, Guido; Fijneman, Remond J.A.; Boiten, Jan-Willem; A. Meijer, Gerrit; Stubbs, Andrew; Rambla, Jordi; Spalding, Dylan; Abeln, Sanne

    2016-01-01

    High-throughput molecular profiling techniques are routinely generating vast amounts of data for translational medicine studies. Secure access controlled systems are needed to manage, store, transfer and distribute these data due to its personally identifiable nature. The European Genome-phenome Archive (EGA) was created to facilitate access and management to long-term archival of bio-molecular data. Each data provider is responsible for ensuring a Data Access Committee is in place to grant access to data stored in the EGA. Moreover, the transfer of data during upload and download is encrypted. ELIXIR, a European research infrastructure for life-science data, initiated a project (2016 Human Data Implementation Study) to understand and document the ELIXIR requirements for secure management of controlled-access data. As part of this project, a full ecosystem was designed to connect archived raw experimental molecular profiling data with interpreted data and the computational workflows, using the CTMM Translational Research IT (CTMM-TraIT) infrastructure http://www.ctmm-trait.nl as an example. Here we present the first outcomes of this project, a framework to enable the download of EGA data to a Galaxy server in a secure way. Galaxy provides an intuitive user interface for molecular biologists and bioinformaticians to run and design data analysis workflows. More specifically, we developed a tool -- ega_download_streamer - that can download data securely from EGA into a Galaxy server, which can subsequently be further processed. This tool will allow a user within the browser to run an entire analysis containing sensitive data from EGA, and to make this analysis available for other researchers in a reproducible manner, as shown with a proof of concept study.  The tool ega_download_streamer is available in the Galaxy tool shed: https://toolshed.g2.bx.psu.edu/view/yhoogstrate/ega_download_streamer. PMID:28232859

  4. US fishing industry participation in NASA's earth resources survey program: Communications between NASA and the US fishing industry

    NASA Technical Reports Server (NTRS)

    Maughan, P. M.; Marmelstein, A. D.; Hecht, K.; Broadhead, G. C.; Alverson, F. G.; Peckham, C. G.

    1971-01-01

    A study to evaluate the applications of remote sensing in commercial fishing is reported, and the basis for effective communications between NASA and the U.S. fishing industry are established. Detailed information is presented in the following areas: organization of the fishing complex and communication levels within and between the components; organization of the fishing industry and the communications within and between both selected fisheries and various industry groups; relationships and communications between federal, state, and local government agencies and the fishing industry; relationships and communications between international and regional fisheries commissions; and intergovernmental agency relationships relevant to the fishing industry. It will be necessary to educate those individuals having access to the techniques and resultant data, and channels for distribution of the information to selected fisheries are recommended. Procedures for feedback information loops are also established.

  5. Employment in the Broadcasting Industry--1973.

    ERIC Educational Resources Information Center

    Federal Communications Commission, Washington, DC.

    The 1973 broadcasting industry employment report consists of State reports, organized alphabetically according to community or city, from broadcasting stations with more than 10 full-time employees. Information has been compiled from the annual employment profile report (Federal Communications Commission Form 395), required of broadcast licensees.…

  6. Access Control Management for SCADA Systems

    NASA Astrophysics Data System (ADS)

    Hong, Seng-Phil; Ahn, Gail-Joon; Xu, Wenjuan

    The information technology revolution has transformed all aspects of our society including critical infrastructures and led a significant shift from their old and disparate business models based on proprietary and legacy environments to more open and consolidated ones. Supervisory Control and Data Acquisition (SCADA) systems have been widely used not only for industrial processes but also for some experimental facilities. Due to the nature of open environments, managing SCADA systems should meet various security requirements since system administrators need to deal with a large number of entities and functions involved in critical infrastructures. In this paper, we identify necessary access control requirements in SCADA systems and articulate access control policies for the simulated SCADA systems. We also attempt to analyze and realize those requirements and policies in the context of role-based access control that is suitable for simplifying administrative tasks in large scale enterprises.

  7. General Marketing. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This General Marketing Occupational Competency Analysis Profile (OCAP) is one of a series of competency lists, verified by expert workers, that have evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives from throughout Ohio. This OCAP identifies the…

  8. Tool independence for the Web Accessibility Quantitative Metric.

    PubMed

    Vigo, Markel; Brajnik, Giorgio; Arrue, Myriam; Abascal, Julio

    2009-07-01

    The Web Accessibility Quantitative Metric (WAQM) aims at accurately measuring the accessibility of web pages. One of the main features of WAQM among others is that it is evaluation tool independent for ranking and accessibility monitoring scenarios. This article proposes a method to attain evaluation tool independence for all foreseeable scenarios. After demonstrating that homepages have a more similar error profile than any other web page in a given web site, 15 homepages were measured with 10,000 different values of WAQM parameters using EvalAccess and LIFT, two automatic evaluation tools for accessibility. A similar procedure was followed with random pages and with several test files obtaining several tuples that minimise the difference between both tools. One thousand four hundred forty-nine web pages from 15 web sites were measured with these tuples and those values that minimised the difference between the tools were selected. Once the WAQM was tuned, the accessibility of 15 web sites was measured with two metrics for web sites, concluding that even if similar values can be produced, obtaining the same scores is undesirable since evaluation tools behave in a different way.

  9. 2002 Industry Studies: Education

    DTIC Science & Technology

    2002-01-01

    1 EDUCATION ABSTRACT United States schools are better than ever, but they are not assuring competitive advantage . Unequal access to quality...competitive advantage , and promote national security. • Demand for education continues to grow as the US transitions from an industrial to a knowledge... international assessments, pose challenges. With human capital constituting our most critical national resource, a world-class education system is vital to

  10. Improving Access to Hospice Care: Informing the Debate

    PubMed Central

    CARLSON, MELISSA D.A.; MORRISON, R. SEAN; BRADLEY, ELIZABETH H.

    2015-01-01

    The most frequently cited policy solution for improving access to hospice care for patients and families is to expand hospice eligibility criteria under the Medicare Hospice Benefit. However, the substantial implications of such a policy change have not been fully articulated or evaluated. This paper seeks to identify and describe the implications of expanding Medicare Hospice Benefit eligibility on the nature of hospice care, the cost of hospice care to the Medicare program, and the very structure of hospice and palliative care delivery in the United States. The growth in hospice has been dramatic and the central issue facing policymakers and the hospice industry is defining the appropriate target population for hospice care. As policymakers and the hospice industry discuss the future of hospice and potential changes to the Medicare Hospice Benefit, it is critical to clearly delineate the options—and the implications and challenges of each option—for improving access to hospice care for patients and families. PMID:18363486

  11. The global alcohol industry: an overview.

    PubMed

    Jernigan, David H

    2009-02-01

    To describe the globalized sector of the alcoholic beverage industry, including its size, principal actors and activities. Market research firms and business journalism are the primary sources for information about the global alcohol industry, and are used to profile the size and membership of the three main industry sectors of beer, distilled spirits and wine. Branded alcoholic beverages are approximately 38% of recorded alcohol consumption world-wide. Producers of these beverages tend to be large multi-national corporations reliant on marketing for their survival. Marketing activities include traditional advertising as well as numerous other activities, such as new product development, product placement and the creation and promotion of social responsibility programs, messages and organizations. The global alcohol industry is highly concentrated and innovative. There is relatively little public health research evaluating the impact of its many marketing activities.

  12. Installation and Initial Operation of DOE's 449-MHz Wind Profiling Radars on the U.S. West Coast

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Flaherty, Julia E.; Shaw, William J.; Morris, Victor R.

    The U.S. Department of Energy (DOE), in collaboration with the National Oceanic and Atmospheric Administration (NOAA), has recently completed the installation of three new wind profiling radars on the Washington and Oregon coasts. These systems operate at a frequency of 449 MHz and provide mean wind profiles to a height of roughly 8 km, with the maximum measurement height depending on time-varying atmospheric conditions. This is roughly half the depth of the troposphere at these latitudes. Each system is also equipped with a radio acoustic sounding system (RASS), which provides a measure of the temperature profile to heights of approximatelymore » 2 km. Other equipment deployed alongside the radar includes a surface meteorological station and GPS for column water vapor. This project began in fiscal year 2014, starting with equipment procurements and site selection. In addition, environmental reviews, equipment assembly and testing, site access agreements, and infrastructure preparations have been performed. Finally, with equipment deployment with data collection and dissemination, the primary tasks of this project have been completed. The three new wind profiling radars have been deployed at airports near Coos Bay, OR, and Astoria, OR, and at an industrial park near Forks, WA. Data are available through the NOAA Earth Systems Research Laboratory Data Display website, and will soon be made available through the DOE Atmosphere to Electrons data archive and portal as well.« less

  13. Sustainable development of new energy vehicle industry in China

    NASA Astrophysics Data System (ADS)

    Li, Mingyang; Li, Lingzhi

    2018-03-01

    The new energy vehicle industry in China has developed rapidly in recent years, but there is still a gap in core technology. Some problems are brought the adverse effect on it, such as imperfect infrastructures, imperfect systems in market access and regulatory, single channels for marketing and low acceptance among consumer. Based on the development of new energy vehicle industry home and abroad, this paper puts forward some problems of new energy vehicles industry in China, then offers some feasible suggestions.

  14. Accessing Suomi NPP OMPS Products Through the GES DISC Online Data Services

    NASA Astrophysics Data System (ADS)

    Johnson, J. E.; Wei, J. C.; Garasimov, I.; Vollmer, B.

    2017-12-01

    The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) is the primary archive of the latest versions of atmospheric composition data from the Suomi National Polar-orbiting Partnership (NPP) Ozone Mapping Profiler Suite (OMPS) mission. OMPS consists of three spectrometers: a Nadir Mapper (300-420 nm) with 50×50 km2 resolution and 2600 km wide swath, a Nadir Profiler (250-310 nm) with 250×250 km2 footprint, and a three-slit Limb Profiler (290-1000 nm) making 3 vertical profiles spaced about 250 km apart with 1-2 km vertical resolution up to 65 km altitude. OMPS measures primarily ozone, both total column and vertical profiles, but also includes measurements of NO2 and SO2 total and tropospheric columns, aerosol extinction profiles. Also available from OMPS are the Level-1B calibrated and geolocated radiances. All data products are generated at the OMPS Science Investigator Processing System (SIPS) at NASA/GSFC. This presentation will provide an overview of the OMPS products available at the GES DISC archive, as well as demonstrate the various data services provided by the GES DISC. Traditionally users have accessed data by downloading data files using anonymous FTP. Although one may still download the full OMPS data products from the archive (using HTTPS instead), the GES DISC now also offers online data services that allow users to not have to physically download the full data files to their desktop computer. Users can access the data through a desktop client tool (such as IDL, Matlab or Panoply) using OPeNDAP. Other data services include file subsetters (spatially, temporally, and/or by variable), as well as data visualization and exploration services for users to preview or quickly analyze the data. Since TOMS and EOS Aura data products are also available from the GES DISC archive, these can be easily accessed and compared with the OMPS data.

  15. Optical Access Networks

    NASA Astrophysics Data System (ADS)

    Zheng, Jun; Ansari, Nirwan

    2005-01-01

    economic viability of many potential high-bandwidth applications. In recent years, optical access networks have been receiving tremendous attention from both academia and industry. A large number of research activities have been carried out or are now underway this hot area. The purpose of this feature issue is to expose the networking community to the latest research breakthroughs and progresses in the area of optical access networks.

    Scope of Contributions

    This feature issue aims to present a collection of papers that focus on the state-of-the-art research in various networking aspects of optical access networks. Original papers are solicited from all researchers involved in area of optical access networks. Topics of interest include but not limited to:
    • Optical access network architectures and protocols
    • Passive optical networks (BPON, EPON, GPON, etc.)
    • Active optical networks
    • Multiple access control
    • Multiservices and QoS provisioning
    • Network survivability
    • Field trials and standards
    • Performance modeling and analysis

    Manuscript Submission

    To submit to this special issue, follow the normal procedure for submission to JON, indicating ``Optical Access Networks feature' in the ``Comments' field of the online submission form. For all other questions relating to this feature issue, please send an e-mail to jon@osa.org, subject line ``Optical Access Networks' Additional information can be found on the JON website: http://www.osa-jon.org/submission/. Submission Deadline: 1 June 2005

  16. Environmental profile of latent energy storage materials applied to industrial systems.

    PubMed

    López-Sabirón, Ana M; Aranda-Usón, Alfonso; Mainar-Toledo, M D; Ferreira, Victor J; Ferreira, Germán

    2014-03-01

    Industry sector is an intensive-energy consumer and approximately 20-50% of industrial energy consumption is lost as waste heat. Therefore, there is a great potential for reducing energy consumption and, subsequently, decreasing the fossil fuels used if this lost energy can be recovered. Thermal Energy Storage (TES) based on Latent Heat Storage systems (LHS) using Phase Change Materials (PCMs) has become one of the most feasible solutions in achieving energy savings through waste heat recovery, especially when there is a mismatch between the supply and consumption of energy processes. In this paper, a shell and tube heat exchanger incorporating PCMs has been considered to store the excess energy available in an industrial process. Several attempts have been made to design the most appropriate system considering many cost-benefit and technical criteria to maximise the heat recovery. However, the environmental criterion also is an important factor when determining whether this technology is not only energy and cost-efficient but also environmentally friendly, considering the whole life of the system from its manufacture to its disposal. To this end, this research includes a Life Cycle Assessment (LCA) to determine whether the energy savings of conventional fuels during the operation stage are large enough to balance the environmental impact originated in an industrial TES system including the manufacture, use and disposal phases. Inputs and outputs of each management stage have been defined, and the inventory emissions calculated by SIMAPRO v7.3.2. A midpoint and endpoint approaches have been carried out using two methods, CML 2001 and Eco-indicator 99, respectively. As a preliminary result, a promising reduction in the overall impacts was obtained by the use of this technology. From the environmental impact results, a matrix of possible technical solutions is displayed, to improve the environmental performance. Copyright © 2013 Elsevier B.V. All rights reserved.

  17. Alcohol Marketing on Twitter and Instagram: Evidence of Directly Advertising to Youth/Adolescents.

    PubMed

    Barry, Adam E; Bates, Austin M; Olusanya, Olufunto; Vinal, Cystal E; Martin, Emily; Peoples, Janiene E; Jackson, Zachary A; Billinger, Shanaisa A; Yusuf, Aishatu; Cauley, Daunte A; Montano, Javier R

    2016-07-01

    Assess whether alcohol companies restrict youth/adolescent access, interaction, and exposure to their marketing on Twitter and Instagram. Employed five fictitious male and female Twitter (n = 10) and Instagram (n = 10) user profiles aged 13, 15, 17, 19 and/or 21. Using cellular smartphones, we determined whether profiles could (a) interact with advertising content-e.g. retweet, view video or picture content, comment, share URL; and/or (b) follow and directly receive advertising material updates from the official Instagram and Twitter pages of 22 alcohol brands for 30 days. All user profiles could fully access, view, and interact with alcohol industry content posted on Instagram and Twitter. Twitter's age-gate, which restricts access for those under 21, successfully prevented underage profiles from following and subsequently receiving promotional material/updates. The two 21+ profiles collectively received 1836 alcohol-related tweets within 30 days. All Instagram profiles, however, were able to follow all alcohol brand pages and received an average of 362 advertisements within 30 days. The quantity of promotional updates increased throughout the week, reaching their peak on Thursday and Friday. Representatives/controllers of alcohol brand Instagram pages would respond directly to our underage user's comments. The alcohol industry is in violation of their proposed self-regulation guidelines for digital marketing communications on Instagram. While Twitter's age-gate effectively blocked direct to phone updates, unhindered access to post was possible. Everyday our fictitious profiles, even those as young as 13, were bombarded with alcohol industry messages and promotional material directly to their smartphones. © The Author 2015. Medical Council on Alcohol and Oxford University Press. All rights reserved.

  18. Carotenoid profiling of leaves of selected eggplant accessions subjected to drought stress

    USDA-ARS?s Scientific Manuscript database

    This study focused on the quantification of carotenoids of the leaves of African eggplants commonly consumed as leafy and fruit vegetables. The results gave comparative profiles of carotenoids at different growth and developmental stages and under drought stress. Stress was achieved by limiting irri...

  19. Regulation, manufacturing and building industry consensus.

    PubMed

    Deans, Robert

    2012-11-01

    As has been true with many emerging technologies, successful clinical development and recruitment of capital sufficient to reach market approval is measured as an industry platform. Risk, failure and achievement by individual companies are shared by all in the context of access to enthusiastic capital markets and codevelopment partnerships.

  20. Velocity Profile measurements in two-phase flow using multi-wave sensors

    NASA Astrophysics Data System (ADS)

    Biddinika, M. K.; Ito, D.; Takahashi, H.; Kikura, H.; Aritomi, M.

    2009-02-01

    Two-phase flow has been recognized as one of the most important phenomena in fluid dynamics. In addition, gas-liquid two-phase flow appears in various industrial fields such as chemical industries and power generations. In order to clarify the flow structure, some flow parameters have been measured by using many effective measurement techniques. The velocity profile as one of the important flow parameter, has been measured by using ultrasonic velocity profile (UVP) technique. This technique can measure velocity distributions along a measuring line, which is a beam formed by pulse ultrasounds. Furthermore, a multi-wave sensor can measure the velocity profiles of both gas and liquid phase using UVP method. In this study, two types of multi-wave sensors are used. A sensor has cylindrical shape, and another one has square shape. The piezoelectric elements of each sensor have basic frequencies of 8 MHz for liquid phase and 2 MHz for gas phase, separately. The velocity profiles of air-water bubbly flow in a vertical rectangular channel were measured by using these multi-wave sensors, and the validation of the measuring accuracy was performed by the comparison between the velocity profiles measured by two multi-wave sensors.

  1. DNA-Sequence Based Typing of the Cronobacter Genus Using MLST, CRISPR-cas Array and Capsular Profiling

    PubMed Central

    Ogrodzki, Pauline; Forsythe, Stephen J.

    2017-01-01

    The Cronobacter genus is composed of seven species, within which a number of pathovars have been described. The most notable infections by Cronobacter spp. are of infants through the consumption of contaminated infant formula. The description of the genus has greatly improved in recent years through DNA sequencing techniques, and this has led to a robust means of identification. However some species are highly clonal and this limits the ability to discriminate between unrelated strains by some methods of genotyping. This article updates the application of three genotyping methods across the Cronobacter genus. The three genotyping methods were multilocus sequence typing (MLST), capsular profiling of the K-antigen and colanic acid (CA) biosynthesis regions, and CRISPR-cas array profiling. A total of 1654 MLST profiled and 286 whole genome sequenced strains, available by open access at the PubMLST Cronobacter database, were used this analysis. The predominance of C. sakazakii and C. malonaticus in clinical infections was confirmed. The majority of clinical strains being in the C. sakazakii clonal complexes (CC) 1 and 4, sequence types (ST) 8 and 12 and C. malonaticus ST7. The capsular profile K2:CA2, previously proposed as being strongly associated with C. sakazakii and C. malonaticus isolates from severe neonatal infections, was also found in C. turicensis, C. dublinensis and C. universalis. The majority of CRISPR-cas types across the genus was the I-E (Ecoli) type. Some strains of C. dublinensis and C. muytjensii encoded the I-F (Ypseudo) type, and others lacked the cas gene loci. The significance of the expanding profiling will be of benefit to researchers as well as governmental and industrial risk assessors. PMID:29033918

  2. Animal Management Technician. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for animal management technician occupations. The list contains units (with and without subunits), competencies, and…

  3. General Marketing. Ohio's Competency Analysis Profile. Revised.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for general marketing occupations. The list contains units (with and without subunits), competencies, and competency…

  4. Power Equipment Technology. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for power equipment technology occupations. The list contains units (with and without subunits), competencies, and…

  5. Agriculture Products Processing. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

  6. Diversified Health Occupations. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This list consists of essential competencies from the following specialized Ohio Competency Analysis Profile: Dental Assistant; Medical Assistant; and Nurse Aide. Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive…

  7. Biocatalysis in the Pharmaceutical Industry: The Need for Speed.

    PubMed

    Truppo, Matthew D

    2017-05-11

    The use of biocatalysis in the pharmaceutical industry continues to expand as a result of increased access to enzymes and the ability to engineer those enzymes to meet the demands of industrial processes. However, we are still just scratching the surface of potential biocatalytic applications. The time pressures present in pharmaceutical process development are incompatible with the long lead times required for engineering a suitable biocatalyst. Dramatic increases in the speed of protein engineering are needed to deliver on the ever increasing opportunities for industrial biocatalytic processes.

  8. Website accessibility in the tourism industry: an analysis of official national tourism organization websites around the world.

    PubMed

    Domínguez Vila, Trinidad; Alén González, Elisa; Darcy, Simon

    2017-08-09

    To analyze the accessibility of official national tourism organization websites of countries around the world, in order to establish possible common patterns and rankings of those with exemplary practice through to those with the highest number of issues. The purpose for undertaking such an analysis is to provide a quasi-indicator of inclusive organizational practice for online accessibility for both destination managers and their accessible tourism consumers - domestic and overseas people with disability visiting the websites. The official tourism websites of 210 countries included in the latest World Tourism Organization report were analyzed. A website accessibility evaluation tool (website accessible test) was used in the analysis, according to AA and AAA levels of conformance to Web Content Accessibility Guidelines 2.0 requirements. Different patterns compliance to Web Content Accessibility Guidelines 2.0 were established for the clusters, which were rather similar for both AA and AAA conformance levels. The main issues in the least accessible websites were also identified, mainly focused on the following guidelines: navigable, compatible, adaptability, text alternatives and also referred to other assistive technologies. Once the main issues were established several alternatives are suggested to address them, such as implementing more prescriptive laws and regulations, complying with mandatory benchmark standards and/or having external agencies audit website designs. However, in addition to using benchmark standards, efforts to improve this situation should also be made by programmers, who should also rely on preexistent experiences and develop more dynamic knowledge. This knowledge may include text alternatives for any nontext content; creation of content that can be presented in different ways without losing information; provide ways to help users navigate, find content, determine where they are and navigate websites to maximize compatibility with assistive

  9. Installation of the National Transport Code Collaboration Data Server at the ITPA International Multi-tokamak Confinement Profile Database

    NASA Astrophysics Data System (ADS)

    Roach, Colin; Carlsson, Johan; Cary, John R.; Alexander, David A.

    2002-11-01

    The National Transport Code Collaboration (NTCC) has developed an array of software, including a data client/server. The data server, which is written in C++, serves local data (in the ITER Profile Database format) as well as remote data (by accessing one or several MDS+ servers). The client, a web-invocable Java applet, provides a uniform, intuitive, user-friendly, graphical interface to the data server. The uniformity of the interface relieves the user from the trouble of mastering the differences between different data formats and lets him/her focus on the essentials: plotting and viewing the data. The user runs the client by visiting a web page using any Java capable Web browser. The client is automatically downloaded and run by the browser. A reference to the data server is then retrieved via the standard Web protocol (HTTP). The communication between the client and the server is then handled by the mature, industry-standard CORBA middleware. CORBA has bindings for all common languages and many high-quality implementations are available (both Open Source and commercial). The NTCC data server has been installed at the ITPA International Multi-tokamak Confinement Profile Database, which is hosted by the UKAEA at Culham Science Centre. The installation of the data server is protected by an Internet firewall. To make it accessible to clients outside the firewall some modifications of the server were required. The working version of the ITPA confinement profile database is not open to the public. Authentification of legitimate users is done utilizing built-in Java security features to demand a password to download the client. We present an overview of the NTCC data client/server and some details of how the CORBA firewall-traversal issues were resolved and how the user authentification is implemented.

  10. Redactions in protocols for drug trials: what industry sponsors concealed.

    PubMed

    Marquardsen, Mikkel; Ogden, Michelle; Gøtzsche, Peter C

    2018-04-01

    Objective To describe the redactions in contemporary protocols for industry-sponsored randomised drug trials with patient relevant outcomes and to evaluate whether there was a legitimate rationale for the redactions. Design Cohort study. Under the Freedom of Information Act, we requested access to trial protocols approved by a research ethics committee in Denmark from October 2012 to March 2013. We received 17 consecutive protocols, which had been redacted before we got them, and nine protocols without redactions. In five additional cases, the companies refused to let the committees give us access, and in three other cases, documents were missing. Participants Not applicable. Setting Not applicable. Main outcome measure Amount and nature of redactions in 22 predefined key protocol variables. Results The redactions were most widespread in those sections of the protocol where there is empirical evidence of substantial problems with the trustworthiness of published drug trials: data analysis, handling of missing data, detection and analysis of adverse events, definition of the outcomes, interim analyses and premature termination of the study, sponsor's access to incoming data while the study is running, ownership to the data and investigators' publication rights. The parts of the text that were redacted differed widely, both between companies and within the same company. Conclusions We could not identify any legitimate rationale for the redactions. The current mistrust in industry-sponsored drug trials can only change if the industry offers unconditional access to its trial protocols and other relevant documents and data.

  11. Academia-industry symbiosis in organic chemistry.

    PubMed

    Michaudel, Quentin; Ishihara, Yoshihiro; Baran, Phil S

    2015-03-17

    Collaboration between academia and industry is a growing phenomenon within the chemistry community. These sectors have long held strong ties since academia traditionally trains the future scientists of the corporate world, but the recent drastic decrease of public funding is motivating the academic world to seek more private grants. This concept of industrial "sponsoring" is not new, and in the past, some companies granted substantial amounts of money per annum to various academic institutions in exchange for prime access to all their scientific discoveries and inventions. However, academic and industrial interests were not always aligned, and therefore the investment has become increasingly difficult to justify from industry's point of view. With fluctuating macroeconomic factors, this type of unrestricted grant has become more rare and has been largely replaced by smaller and more focused partnerships. In our view, forging a partnership with industry can be a golden opportunity for both parties and can represent a true symbiosis. This type of project-specific collaboration is engendered by industry's desire to access very specific academic expertise that is required for the development of new technologies at the forefront of science. Since financial pressures do not allow companies to spend the time to acquire this expertise and even less to explore fundamental research, partnering with an academic laboratory whose research is related to the problem gives them a viable alternative. From an academic standpoint, it represents the perfect occasion to apply "pure science" research concepts to solve problems that benefit humanity. Moreover, it offers a unique opportunity for students to face challenges from the "real world" at an early stage of their career. Although not every problem in industry can be solved by research developments in academia, we argue that there is significant scientific overlap between these two seemingly disparate groups, thereby presenting an

  12. Profiles of Major Suppliers to the Automotive Industry : Vol. 7. Machine Tool Suppliers to the Automotive Industry.

    DOT National Transportation Integrated Search

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  13. Technology transfer from NASA to targeted industries, volume 2

    NASA Technical Reports Server (NTRS)

    Mccain, Wayne; Schroer, Bernard J.; Souder, William E.; Spann, Mary S.; Watters, Harry; Ziemke, M. Carl

    1993-01-01

    This volume contains the following materials to support Volume 1: (1) Survey of Metal Fabrication Industry in Alabama; (2) Survey of Electronics Manufacturing/Assembly Industry in Alabama; (3) Apparel Modular Manufacturing Simulators; (4) Synopsis of a Stereolithography Project; (5) Transferring Modular Manufacturing Technology to an Apparel Firm; (6) Letters of Support; (7) Fact Sheets; (8) Publications; and (9) One Stop Access to NASA Technology Brochure.

  14. The Online Public Access Catalogue at the Cite des Sciences Mediatheque in Paris.

    ERIC Educational Resources Information Center

    Witt, Maria

    1990-01-01

    Provides background on the holdings, services, and layout of the mediatheque (multimedia library) at the Cite des Sciences et de l'Industrie (originally the Museum of Science, Technology, and Industry) in Paris. The library's online public access catalog and use of the catalog by children and the visually handicapped are described. (four…

  15. Business Information Systems. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) for business information systems is an employer-verified competency list that evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives throughout Ohio. The competency list consists of 10 units: (1) data…

  16. Adopting National Vocational Qualifications in the Offshore Industry: A Case Study.

    ERIC Educational Resources Information Center

    Fuller, Alison; John, Debbie

    1994-01-01

    From a case study of the introduction of National Vocational Qualifications (NVQs) in the British petroleum industry emerged three key issues: (1) their credibility depends on how closely they reflect employment standards; (2) context is important; and (3) although NVQs should provide wider access to opportunities, the offshore industry's…

  17. Upper limb grafts for hemodialysis access.

    PubMed

    Shemesh, David; Goldin, Ilya; Verstandig, Anthony; Berelowitz, Daniel; Zaghal, Ibrahim; Olsha, Oded

    2015-01-01

    Arteriovenous (AV) grafts are required for hemodialysis access when options for native fistulas have been fully exhausted, where they continue to play an important role in hemodialysis patients, offering a better alternative to central vein catheters. When planning autogenous accesses using Doppler ultrasound, adequate arterial inflow and venous outflow must be consciously preserved for future access creation with grafts. Efforts to improve graft patency include changing graft configuration, graft biology and hemodynamics. Industry offers early cannulation grafts to reduce central catheter use and a bioengineered graft is undergoing clinical studies. Although the outcome of AV grafts is inferior to fistulas, grafts can provide long-term hemodialysis access that is a better alternative to central venous catheters. AV grafts have significant drawbacks, mainly poor patency, infection and cost but also have some advantages: early maturation, ease of creation and needling and widespread availability. The outcome of AV graft surgery is variable from center to center. The primary patency rate for AV grafts is 58% at 6 months and the secondary patency rate is 76% at 6 months and 55% at 18 months. There are centers of excellence that report a 1 year secondary patency rate of up to 91%. In this review of the use of AV grafts for hemodialysis access in the upper extremities, technical issues involved in planning the access and performing the surgery in its different configurations are discussed and the role of surveillance and maintenance with their attendant surgical and radiological interventions is described.

  18. Access to health care and community social capital.

    PubMed

    Hendryx, Michael S; Ahern, Melissa M; Lovrich, Nicholas P; McCurdy, Arthur H

    2002-02-01

    To test the hypothesis that variation in reported access to health care is positively related to the level of social capital present in a community. The 1996 Household Survey of the Community Tracking Study, drawn from 22 metropolitan statistical areas across the United States (n = 19,672). Additional data for the 22 communities are from a 1996 multicity broadcast media marketing database, including key social capital indicators, the 1997 National Profile of Local Health Departments survey, and Interstudy, American Hospital Association, and American Medical Association sources. The design is cross-sectional. Self-reported access to care problems is the dependent variable. Independent variables include individual sociodemographic variables, community-level health sector variables, and social capital variables. Data are merged from the various sources and weighted to be population representative and are analyzed using hierarchical categorical modeling. Persons who live in metropolitan statistical areas featuring higher levels of social capital report fewer problems accessing health care. A higher HMO penetration rate in a metropolitan statistical area was also associated with fewer access problems. Other health sector variables were not related to health care access. The results observed for 22 major U.S. cities are consistent with the hypothesis that community social capital enables better access to care, perhaps through improving community accountability mechanisms.

  19. University-Industry Strategic Partnerships. Benefits and Impediments.

    ERIC Educational Resources Information Center

    Gregory, Eugene H.

    1997-01-01

    University-industry partnership give companies opportunities to observe prospective employees and access to research innovations at lower cost. Faculty increase their familiarity with the state of the art and gain additional funding sources. Barriers include intellectual property issues, publication of proprietary information, and conflicting…

  20. Biocatalysis in the Pharmaceutical Industry: The Need for Speed

    PubMed Central

    2017-01-01

    The use of biocatalysis in the pharmaceutical industry continues to expand as a result of increased access to enzymes and the ability to engineer those enzymes to meet the demands of industrial processes. However, we are still just scratching the surface of potential biocatalytic applications. The time pressures present in pharmaceutical process development are incompatible with the long lead times required for engineering a suitable biocatalyst. Dramatic increases in the speed of protein engineering are needed to deliver on the ever increasing opportunities for industrial biocatalytic processes. PMID:28523096

  1. A Framework for Context Sensitive Risk-Based Access Control in Medical Information Systems

    PubMed Central

    Choi, Donghee; Kim, Dohoon; Park, Seog

    2015-01-01

    Since the access control environment has changed and the threat of insider information leakage has come to the fore, studies on risk-based access control models that decide access permissions dynamically have been conducted vigorously. Medical information systems should protect sensitive data such as medical information from insider threat and enable dynamic access control depending on the context such as life-threatening emergencies. In this paper, we suggest an approach and framework for context sensitive risk-based access control suitable for medical information systems. This approach categorizes context information, estimating and applying risk through context- and treatment-based permission profiling and specifications by expanding the eXtensible Access Control Markup Language (XACML) to apply risk. The proposed framework supports quick responses to medical situations and prevents unnecessary insider data access through dynamic access authorization decisions in accordance with the severity of the context and treatment. PMID:26075013

  2. The development of a multi-dimensional gambling accessibility scale.

    PubMed

    Hing, Nerilee; Haw, John

    2009-12-01

    The aim of the current study was to develop a scale of gambling accessibility that would have theoretical significance to exposure theory and also serve to highlight the accessibility risk factors for problem gambling. Scale items were generated from the Productivity Commission's (Australia's Gambling Industries: Report No. 10. AusInfo, Canberra, 1999) recommendations and tested on a group with high exposure to the gambling environment. In total, 533 gaming venue employees (aged 18-70 years; 67% women) completed a questionnaire that included six 13-item scales measuring accessibility across a range of gambling forms (gaming machines, keno, casino table games, lotteries, horse and dog racing, sports betting). Also included in the questionnaire was the Problem Gambling Severity Index (PGSI) along with measures of gambling frequency and expenditure. Principal components analysis indicated that a common three factor structure existed across all forms of gambling and these were labelled social accessibility, physical accessibility and cognitive accessibility. However, convergent validity was not demonstrated with inconsistent correlations between each subscale and measures of gambling behaviour. These results are discussed in light of exposure theory and the further development of a multi-dimensional measure of gambling accessibility.

  3. Capturing the Sun: A Roadmap for Navigating Data-Access Challenges and Auto-Populating Solar Home Sales Listings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stukel, Laura; Hoen, Ben; Adomatis, Sandra

    Capturing the Sun: A Roadmap for Navigating Data-Access Challenges and Auto-Populating Solar Home Sales Listings supports a vision of solar photovoltaic (PV) advocates and real estate advocates evolving together to make information about solar homes more accessible to home buyers and sellers and to simplify the process when these homes are resold. The Roadmap is based on a concept in the real estate industry known as automatic population of fields. Auto-population (also called auto-pop in the industry) is the technology that allows data aggregated by an outside industry to be matched automatically with home sale listings in a multiple listingmore » service (MLS).« less

  4. The temperament profiles of school-age children.

    PubMed

    McClowry, Sandra Graham

    2002-02-01

    Maternal reports of child temperament were used to develop temperament profiles of school-age children. The subjects were 883 children who were between 4 and 12 years of age. The children's families varied substantially in their socioeconomic status and race/ethnicity. To develop the profiles, the dimensions derived from the School-Age Temperament Inventory were subjected to a second order principal factor analysis with varimax rotation. Pearson chi-squares were used to determine whether sociodemographic variables were proportionally represented among the profiles. Forty-two percent of the children were classified into four temperament profiles. High maintenance and cautious/slow to warm up were deemed as challenging temperaments. Industrious and social/eager to try were mirror images of those profiles and were labeled easy. Some children were both types of challenging or easy profiles. The generalizability of the profiles in relation to the sociodemographic variables of gender, age, race/ethnicity, and socioeconomic status was also examined. Challenging temperament profiles were disproportionately represented by boys, Hispanic children, and those from lower socioeconomic families. Girls were over represented in the group that included both types of easy temperaments. Social/eager to try children were more often from higher rather than lower socioeconomic status families. Clinical applications and research implications for the profiles are discussed. The profiles can be used as exemplars that parents can use to recognize their child's temperament. Further research is needed to explore whether different developmental outcomes are associated with the profiles. Copyright 2002, Elsevier Science (USA).

  5. Profiles of lead in urban dust and the effect of the distance to multi-industry in an old heavy industry city in China.

    PubMed

    Yu, Yang; Li, Yingxia; Li, Ben; Shen, Zhenyao; Stenstrom, Michael K

    2017-03-01

    Lead (Pb) concentration in urban dust is often higher than background concentrations and can result in a wide range of health risks to local communities. To understand Pb distribution in urban dust and how multi-industrial activity affects Pb concentration, 21 sampling sites within the heavy industry city of Jilin, China, were analyzed for Pb concentration. Pb concentrations of all 21 urban dust samples from the Jilin City Center were higher than the background concentration for soil in Jilin Province. The analyses show that distance to industry is an important parameter determining health risks associated with Pb in urban dust. The Pb concentration showed an exponential decrease, with increasing distance from industry. Both maximum likelihood estimation and Bayesian analysis were used to estimate the exponential relationship between Pb concentration and distance to multi-industry areas. We found that Bayesian analysis was a better method with less uncertainty for estimating Pb dust concentrations based on their distance to multi-industry, and this approach is recommended for further study. Copyright © 2016. Published by Elsevier Inc.

  6. Three essays on access pricing

    NASA Astrophysics Data System (ADS)

    Sydee, Ahmed Nasim

    In the first essay, a theoretical model is developed to determine the time path of optimal access price in the telecommunications industry. Determining the optimal access price is an important issue in the economics of telecommunications. Setting a high access price discourages potential entrants; a low access price, on the other hand, amounts to confiscation of private property because the infrastructure already built by the incumbent is sunk. Furthermore, a low access price does not give the incumbent incentives to maintain the current network and to invest in new infrastructures. Much of the existing literature on access pricing suffers either from the limitations of a static framework or from the assumption that all costs are avoidable. The telecommunications industry is subject to high stranded costs and, therefore, to address this issue a dynamic model is imperative. This essay presents a dynamic model of one-way access pricing in which the compensation involved in deregulatory taking is formalized and then analyzed. The short run adjustment after deregulatory taking has occurred is carried out and discussed. The long run equilibrium is also analyzed. A time path for the Ramsey price is shown as the correct dynamic price of access. In the second essay, a theoretical model is developed to determine the time path of optimal access price for an infrastructure that is characterized by congestion and lumpy investment. Much of the theoretical literature on access pricing of infrastructure prescribes that the access price be set at the marginal cost of the infrastructure. In proposing this rule of access pricing, the conventional analysis assumes that infrastructure investments are infinitely divisible so that it makes sense to talk about the marginal cost of investment. Often it is the case that investments in infrastructure are lumpy and can only be made in large chunks, and this renders the marginal cost concept meaningless. In this essay, we formalize a model of

  7. From legitimate consumers to public relations pawns: the tobacco industry and young Australians

    PubMed Central

    Carter, S

    2003-01-01

    Objective: To document the Australian tobacco industry's activities regarding youth smoking to support tobacco control. Method: 492 industry documents from primary and secondary websites were abstracted and analysed. Results: Australian legislation and rhetoric on youth and tobacco has changed dramatically over the last 50 years, from an unproblematic association of teenagers and smoking in the 1960s, through the industry's aggressive attacks and denials in the 1980s, to the 1990s, when industry became newly compliant with "societal expectations" and youth became a dominant bargaining issue in the industry's public relations strategy. The industry's current policy is to simultaneously blame others for underage smoking, frame the industry as socially responsible via voluntary marketing codes, youth access programmes, and school education, and market actively to young adults. Conclusions: The arbitrary distinction between 17 and 18 year olds is, particularly in Australia's dark market, a liability for tobacco control and an opportunity for the industry, which is attempting to claim the high moral ground traditionally occupied by tobacco control on the youth issue. The current review of Australia's Tobacco Advertising Prohibition Act of 1992 should prohibit all forms of industry communication targeting young people, including retail access and schools programmes and below-the-line marketing. Tobacco control advocacy should highlight the industry's attempts to use the youth issue in its own favour while laying the blame elsewhere. PMID:14645951

  8. From legitimate consumers to public relations pawns: the tobacco industry and young Australians.

    PubMed

    Carter, S M

    2003-12-01

    To document the Australian tobacco industry's activities regarding youth smoking to support tobacco control. 492 industry documents from primary and secondary websites were abstracted and analysed. Australian legislation and rhetoric on youth and tobacco has changed dramatically over the last 50 years, from an unproblematic association of teenagers and smoking in the 1960s, through the industry's aggressive attacks and denials in the 1980s, to the 1990s, when industry became newly compliant with "societal expectations" and youth became a dominant bargaining issue in the industry's public relations strategy. The industry's current policy is to simultaneously blame others for underage smoking, frame the industry as socially responsible via voluntary marketing codes, youth access programmes, and school education, and market actively to young adults. The arbitrary distinction between 17 and 18 year olds is, particularly in Australia's dark market, a liability for tobacco control and an opportunity for the industry, which is attempting to claim the high moral ground traditionally occupied by tobacco control on the youth issue. The current review of Australia's Tobacco Advertising Prohibition Act of 1992 should prohibit all forms of industry communication targeting young people, including retail access and schools programmes and below-the-line marketing. Tobacco control advocacy should highlight the industry's attempts to use the youth issue in its own favour while laying the blame elsewhere.

  9. Environment Information ACCESS, Volume 2 Numbers 15 and 16.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    "Access" is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  10. Environment Information ACCESS, Volume 1 Numbers 11 and 12.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  11. Environment Information ACCESS, Volume 1 Numbers 13 and 14.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    Access is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  12. Environment Information ACCESS, Volume 2 Numbers 13 and 14.

    ERIC Educational Resources Information Center

    Environment Information Center, New York, NY.

    ACCESS is an indexing, abstracting, and information retrieval service that covers published and non-print information on environmental pollution, conservation, and related fields. It provides an overview of the environmental reporting of more than 1000 scholarly, scientific, industrial, technical, and general periodicals and major newspapers;…

  13. Global Market Access in the Internet Era: South Africa's Wood Furniture Industry.

    ERIC Educational Resources Information Center

    Moodley, Sagren

    2002-01-01

    Explores the link between Internet connectivity and access to global markets, and uses the South African wood furniture producers as they are integrated into global value chains and exposed to the demands of more sophisticated markets. Articulates policy recommendations to promote greater diffusion of e-commerce technologies in the wood furniture…

  14. Trigger chemistries for better industrial formulations.

    PubMed

    Wang, Hsuan-Chin; Zhang, Yanfeng; Possanza, Catherine M; Zimmerman, Steven C; Cheng, Jianjun; Moore, Jeffrey S; Harris, Keith; Katz, Joshua S

    2015-04-01

    In recent years, innovations and consumer demands have led to increasingly complex liquid formulations. These growing complexities have provided industrial players and their customers access to new markets through product differentiation, improved performance, and compatibility/stability with other products. One strategy for enabling more complex formulations is the use of active encapsulation. When encapsulation is employed, strategies are required to effect the release of the active at the desired location and time of action. One particular route that has received significant academic research effort is the employment of triggers to induce active release upon a specific stimulus, though little has translated for industrial use to date. To address emerging industrial formulation needs, in this review, we discuss areas of trigger release chemistries and their applications specifically as relevant to industrial use. We focus the discussion on the use of heat, light, shear, and pH triggers as applied in several model polymeric systems for inducing active release. The goal is that through this review trends will emerge for how technologies can be better developed to maximize their value through industrial adaptation.

  15. Housing accessibility for senior citizens in Sweden: Estimation of the effects of targeted elimination of environmental barriers.

    PubMed

    Pettersson, Cecilia; Slaug, Björn; Granbom, Marianne; Kylberg, Marianne; Iwarsson, Susanne

    2017-01-24

    To estimate the effects of targeted elimination of environmental barriers (EB) in the ordinary housing stock in Sweden, and to explore the estimated effects on accessibility at a population level in relation to (a) residents with different functional profiles, (b) different housing types and (c) building periods. Data on dwellings from existing Swedish research databases were utilized. EB and accessibility were assessed by means of the Housing Enabler instrument. In simulations of EB removal, five items that correspond to the most common housing adaptations were selected. The simulations were applied to four functional profiles of different complexity. EB known to be commonly removed by housing adaptations exist in large proportions of the existing ordinary housing stock. Estimated targeted elimination of selected barriers would have the largest accessibility effects for the more complex functional profiles. The effects would be consistently larger for one-family houses, and for all types of dwellings built before 1960. The elimination of the EB most commonly addressed by housing adaptations could result in a reduction of the housing accessibility problems that community-living older people are facing. For society to solve the housing situation for the ageing population well-informed and efficient upgrading of ordinary housing is imperative.

  16. Profiles of Major Suppliers to the Automotive Industry : Vol. 1. Overview.

    DOT National Transportation Integrated Search

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  17. The Technology Information Environment with Industry{trademark} system description

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Detry, R.; Machin, G.

    The Technology Information Environment with Industry (TIE-In{trademark}) provides users with controlled access to distributed laboratory resources that are packaged in intelligent user interfaces. These interfaces help users access resources without requiring the user to have technical or computer expertise. TIE-In utilizes existing, proven technologies such as the Kerberos authentication system, X-Windows, and UNIX sockets. A Front End System (FES) authenticates users and allows them to register for resources and subsequently access them. The FES also stores status and accounting information, and provides an automated method for the resource owners to recover costs from users. The resources available through TIE-In aremore » typically laboratory-developed applications that are used to help design, analyze, and test components in the nation`s nuclear stockpile. Many of these applications can also be used by US companies for non-weapons-related work. TIE-In allows these industry partners to obtain laboratory-developed technical solutions without requiring them to duplicate the technical resources (people, hardware, and software) at Sandia.« less

  18. Cultivating Equity and Access: Focus on Men in Dance

    ERIC Educational Resources Information Center

    McGreevy-Nichols, Susan; Dooling-Cain, Shannon

    2017-01-01

    This year, the National Dance Education Organization (NDEO) is taking a special look at the questions of equity and access in the field of dance education. The Decade of Dance Education (2015-2025), NDEO's ten-year campaign designed to raise the profile of dance education in the arts, provides a unique opportunity to examine their commitment to…

  19. Travel and Tourism Marketing. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for travel and tourism occupations. The list contains units (with and without subunits), competencies, and competency…

  20. Building and Property Maintenance. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for building and property maintenance occupations. The list contains units (with and without subunits), competencies, and…

  1. Building and Property Maintenance. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

  2. Business Administration and Management. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) for business administration and management is an employer-verified competency list that evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives throughout Ohio. The competency list consists of six…

  3. Floriculture and Greenhouse Worker. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for floriculture and greenhouse occupations. The list contains units (with and without subunits), competencies, and…

  4. Cancer and reproductive risks in the semiconductor industry.

    PubMed

    LaDou, Joseph; Bailar, John C

    2007-01-01

    Although many reproductive toxicants and carcinogens are used in the manufacture of semiconductor chips, and worrisome findings have been reported, no broad epidemiologic study has been conducted to define possible risks in a comprehensive way. With few exceptions, the American semiconductor industry has not supported access for independent studies. Older technologies are exported to newly industrialized countries as newer technologies are installed in Japan, the United States, and Europe. Thus there is particular concern about the many workers, mostly in countries that are still industrializing, who have jobs that use chemicals, technologies, and equipment that are no longer in use in developed countries. Since most countries lack cancer registries and have inadequate reproductive and cancer reporting mechanisms, industry efforts to control exposures to carcinogens are of particular importance. Government agencies, the courts, industry, publishers, and academia, on occasion, collude to ignore or to downplay the importance of occupational diseases. Examples of how this happens in the semiconductor industry are presented.

  5. Concentrations, profiles, and estimated human exposures for polychlorinated dibenzo-p-dioxins and dibenzofurans from electronic waste recycling facilities and a chemical industrial complex in Eastern China

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ma, J.; Kannan, K.; Cheng, J.

    2008-11-15

    Electronic shredder waste and dust from e-waste facilities, and leaves and surface soil collected in the vicinity of a large scale e-waste recycling facility in Taizhou, Eastern China, were analyzed for total dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) including 2,3,7,8-substituted congeners. We also determined PCDD/Fs in surface agricultural soils from several provinces in China for comparison with soils from e-waste facilities. Concentrations of total PCDD/Fs were high in all of the matrices analyzed and ranged from 30.9 to 11,400 pg/g for shredder waste, 3460 to 9820 pg/g dry weight for leaves, 2560 to 148,000 pg/g dry weight for workshop-floor dust, and 854more » to 10200 pg/g dry weight for soils. We also analyzed surface soils from a chemical industrial complex (a coke-oven plant, a coal-fired power plant, and a chlor-alkali plant) in Shanghai. Concentrations of total PCDD/Fs in surface soil from the chemical industrial complex were lower than the concentrations found in soils from e-waste recycling plants, but higher than the concentrations found in agricultural soils. Agricultural soils from six cities in China contained low levels of total PCDD/Fs. Profiles of dioxin toxic equivalents (TEQs) of 2,3,7,8-PCDD/Fs in soils from e-waste facilities in Taizhou differed from the profiles found in agricultural soils. The estimated daily intakes of TEQs of PCDD/Fs via soil/dust ingestion and dermal exposure were 2 orders of magnitude higher in people at e-waste recycling facilities than in people at the chemical industrial site, implying greater health risk for humans from dioxin exposures at e-waste recycling facilities. The calculated TEQ exposures for e-waste workers from dust and soil ingestion alone were 2-3 orders of magnitude greater than the exposures from soils in reference locations. 37 refs., 1 fig., 2 tabs.« less

  6. Accessible engineering drawings for visually impaired machine operators.

    PubMed

    Ramteke, Deepak; Kansal, Gayatri; Madhab, Benu

    2014-01-01

    An engineering drawing provides manufacturing information to a machine operator. An operator plans and executes machining operations based on this information. A visually impaired (VI) operator does not have direct access to the drawings. Drawing information is provided to them verbally or by using sample parts. Both methods have limitations that affect the quality of output. Use of engineering drawings is a standard practice for every industry; this hampers employment of a VI operator. Accessible engineering drawings are required to increase both independence, as well as, employability of VI operators. Today, Computer Aided Design (CAD) software is used for making engineering drawings, which are saved in CAD files. Required information is extracted from the CAD files and converted into Braille or voice. The authors of this article propose a method to make engineering drawings information directly accessible to a VI operator.

  7. Industrial labor relations manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA Industrial Labor Relations Manual provides internal guidelines and procedures to assist NASA Field Installations in dealing with contractor labor management disputes, Service Contract Act variance hearings, and to provide access of Labor Union Representatives to NASA for the purpose of maintaining schedules and goals in connection with vital NASA programs. This manual will be revised by page changes as revisions become necessary. Initial distribution of this manual has been made to NASA Headquarters and Field Installations.

  8. Sustaining change: the imperative for patient access strategies.

    PubMed

    Glynn, Peter A R

    2006-01-01

    The paper by Trypuc, MacLeod and Hudson provides a timely and important overview of methods to sustain provincial wait time strategies. The emphasis on accountability for patient access to timely care throughout the healthcare system comes through strongly--as it should. These accountabilities are made "real" through purchase service agreements. Physician-hospital relationships are a fundamental aspect of this accountability. This commentary suggests the inclusion of two additional supporting tools in addition to those cited by the authors of the lead paper--quality monitoring and the use of industrial engineering techniques for queue management and patient flow analysis. Strong and persistent leadership of patient access strategies will ensure sustainable change.

  9. Food Security and Women's Access to Natural Resources workshop; a brief report.

    PubMed

    1997-01-01

    This article describes the workshop on Food Security and Women's Access to Natural Resources, held in January 1997 in Mumbai, India. The workshop was organized jointly by the Tata Institute of Social Sciences and the Indian Association of Women's Studies. The aim was to examine the food security situation in Maharashtra and Gujarat states in the west, the initiative to build alternative institutions, legal changes augmenting industrialization, and how traditional rights to common property resources can be legalized and how the poor can have access to new resources. The workshop organizers were unable to obtain experts on some topics. Core discussion centered on changes in industrialization, natural resources, gender and food security; access to natural resources and poverty alleviation programs; initiatives to create food security; and laws related to access to land and water. Discussions revealed the alienation of small and marginal farmers, landless laborers, and artisans from their livelihoods and survival strategies for these disenfranchised groups. The design of drought eradication and water conservation programs did not permit women and men working at construction sites to have access to the program assets. Case studies revealed situations in which women won the right of access to community water and then negotiated for land in lease. The women used landowners to negotiate credit and access development program assets, but normal channels of the National Bank of Agricultural Research and Development could have provided these benefits. Participants discussed how governments can be held accountable and how public funds could be used to revamp poverty alleviation and asset creation programs. All agreed that macrolevel development should give priority to agricultural development and legal constraints or problems. Five follow-up activities are identified.

  10. The national profile of access to medical care: where do we stand?

    PubMed

    Aday, L A; Andersen, R M

    1984-12-01

    This paper presents analyses of recent national survey data on access to medical care. In particular, information on major access indicators and special problems associated with the economic and political climate of the 1980s collected in a 1982 national telephone survey of 6,610 United States adults and children, representing some 4,802 families, is compared with previous national surveys for key population subgroups--by age, place of residence, income, race, insurance coverage, and type of regular source of care. In general, the findings show that favorable progress has been made, but some inequities continue to persist. Some traditionally disadvantaged groups are more likely to have a regular family doctor, private insurance coverage, have been to a doctor, or had certain preventive tests and procedures than was true for them in the past. On the other hand, compared to the more economically and/or socially advantaged groups in 1982, they have still not "caught up" entirely. There also is evidence that they may be hardest hit by the exacerbation of the financial barriers to care that result from unemployment, inflation, and cutbacks in health program eligibility and benefits that have characterized the decade of the 1980s.

  11. Commercial Truck/Equipment Technician. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) for commercial truck and equipment technician is an employer-verified competency list that evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives throughout Ohio. The task list of the National…

  12. Transradial access: lessons learned from cardiology.

    PubMed

    Snelling, Brian M; Sur, Samir; Shah, Sumedh Subodh; Marlow, Megan M; Cohen, Mauricio G; Peterson, Eric C

    2018-05-01

    Innovations in interventional cardiology historically predate those in neuro-intervention. As such, studying trends in interventional cardiology can be useful in exploring avenues to optimise neuro-interventional techniques. One such cardiology innovation has been the steady conversion of arterial puncture sites from transfemoral access (TFA) to transradial access (TRA), a paradigm shift supported by safety benefits for patients. While neuro-intervention has unique anatomical challenges, the access itself is identical. As such, examining the extensive cardiology literature on the radial approach has the potential to offer valuable lessons for the neuro-interventionalist audience who may be unfamiliar with this body of work. Therefore, we present here a report, particularly for neuro-interventionalists, regarding the best practices for TRA by reviewing the relevant cardiology literature. We focused our review on the data most relevant to our audience, namely that surrounding the access itself. By reviewing the cardiology literature on metrics such as safety profiles, cost and patient satisfaction differences between TFA and TRA, as well as examining the technical nuances of the procedure and post-procedural care, we hope to give physicians treating complex cerebrovascular disease a broader data-driven understanding of TRA. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  13. The alcohol industry and trade agreements: a preliminary assessment.

    PubMed

    Zeigler, Donald W

    2009-02-01

    To review trade agreements, their relation to alcohol control policy and examine the role of the alcohol industry in supporting and attempting to influence trade policy. Review of peer review, public health advocacy literature (both pro and con on free trade), business, press and government documents on trade agreements, assess current and potential challenges by trade agreements to alcohol control policy and investigate the means and extent of industry influence in trade agreements. 'Free' trade agreements reduce trade barriers, increase competition, lower prices and promote alcohol consumption. However, international treaties, negotiated by free trade experts in close consultation with corporate lobbyists and without significant, if any, public health input, governments and corporations contain significant provisions that will result in increased alcohol consumption and may challenge public health measures of other nations as constraints on trade. Conversely, alcohol control measures seek to reduce access and consumption, raise prices and restrict advertising and product promotion. The prospect is for increased alcohol consumption and concomitant problems throughout the world. Trade agreements challenge effective alcohol control policies. The alcohol industry seeks to influence agreements and can be expected to work through trade agreements to reduce tariffs, increase market access and seek to restrict effective domestic regulations. Further research is needed on the impact of trade agreements and the ongoing role of the industry. Advocates must recognize the inherent conflicts between unbridled free trade and public health, work to exclude alcohol from trade agreements, counter industry influence and protect alcohol control policies.

  14. Employment in the Catering & Hospitality Industry--Employee Attitudes and Career Expectations. Research Report.

    ERIC Educational Resources Information Center

    Hotel and Catering Training Co., London (England).

    A study examined the attitudes and career expectations of a random sample of catering and hospitality industry employees in the United Kingdom. The survey focused on the following: aspiration and career intentions, factors causing job satisfaction/dissatisfaction, employment patterns in the industry, satisfaction with/access to…

  15. Industrial sterilization in Turkey: Status, prospects and regulations

    NASA Astrophysics Data System (ADS)

    Erkol, A. Y.

    1995-09-01

    The use of disposable hypodermic syringes has been mandatory in Turkey since 1986. Today, there is a sizable production of disposable medical products in Turkey and likely to increase in the next 2-3 years. The status of the disposable industries is investigated and their production profile is given. Also, some technical details are given about the two industrial irradiation plants of Turkey commissioned recently. The legal aspects of sterilization in Turkey are briefly discussed. Furthermore, the impact of commissioning these plants is described.

  16. The future of academic publishing: what is open access?

    PubMed

    Collins, Jannette

    2005-04-01

    For more than 200 years, publishers have been charging users (i.e., subscribers) for access to scientific information to make a profit. Authors have been required to grant copyright ownership to the publisher. This system was not questioned until the Internet popularized electronic publishing. The Internet allows for rapid dissemination of information to millions of readers. Some people have seen this as an opportunity to revolutionize the system of scientific publishing and to make it one that provides free, open access to all scientific information to all persons everywhere in the world. Such systems have been launched and have instigated a wave of dialogue among proponents and opponents alike. At the center of the controversy is the issue of who will pay for the costs of publishing, because an open-access system is not free, and this threatens the backbone of the traditional publishing industry. Currently, open-access publishers charge authors a fee to have their articles published. Because of this and the uncertainty of the sustainability of the open-access system, some authors are hesitant to participate in the new system. This article reviews the events that led to the creation of open-access publishing, the arguments for and against it, and the implications of open access for the future of academic publishing.

  17. 76 FR 51345 - On Behalf of the Accessibility Committee of the Federal Chief Information Officers Council...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-18

    ... usability of government information and data for persons with disabilities. Input from private industry is sought on the following questions: What is private industry doing to implement information technology (IT...? What are state and local governments doing to implement information technology accessibility that the...

  18. Phenotypic diversity of anthocyanins in sorghum accessions with various pericarp pigments

    USDA-ARS?s Scientific Manuscript database

    Anthocyanins, a sub-class of flavonoids, are natural pigments known to have functional health benefits. Sorghum is a rich source of various phytochemicals including anthocyanins. This study was to identify and quantify the profiles of anthocyanins by HPLC-DAD in the selected 25 sorghum accessions wi...

  19. Metagenomic analysis of antibiotic resistance genes in coastal industrial mariculture systems.

    PubMed

    Wang, Jian-Hua; Lu, Jian; Zhang, Yu-Xuan; Wu, Jun; Luo, Yongming; Liu, Hao

    2018-04-01

    The overuse of antibiotics has posed a propagation of antibiotic resistance genes (ARGs) in aquaculture systems. This study firstly explored the ARGs profiles of the typical mariculture farms including conventional and recirculating systems using metagenomics approach. Fifty ARGs subtypes belonging to 21 ARGs types were identified, showing the wide-spectrum profiles of ARGs in the coastal industrial mariculture systems. ARGs with multiple antibiotics resistance have emerged in the mariculure systems. The co-occurrence pattern between ARGs and microbial taxa showed that Proteobacteria and Bacteroidetes were potential dominant hosts of ARGs in the industrial mariculture systems. Typical nitrifying bacteria such as Nitrospinae in mariculture systems also carried with some resistance genes. Relative abundance of ARGs in fish ponds and wastewater treatment units was relatively high. The investigation showed that industrial mariculture systems were important ARGs reservoirs in coastal area, indicating the critical role of recirculating systems in the terms of ARGs pollution control. Copyright © 2018 Elsevier Ltd. All rights reserved.

  20. Profiles of 511 traveler information services : nationwide deployment areas : draft copy

    DOT National Transportation Integrated Search

    2006-04-01

    Profiles of 511 Traveler Information Services was prepared by the Federal Transit Administration's (FTA) Office of Research, Demonstration and Innovation to increase public awareness, access, and knowledge of the transit content within existing 511 t...

  1. Health Information System Role-Based Access Control Current Security Trends and Challenges.

    PubMed

    de Carvalho Junior, Marcelo Antonio; Bandiera-Paiva, Paulo

    2018-01-01

    This article objective is to highlight implementation characteristics, concerns, or limitations over role-based access control (RBAC) use on health information system (HIS) using industry-focused literature review of current publishing for that purpose. Based on the findings, assessment for indication of RBAC is obsolete considering HIS authorization control needs. We have selected articles related to our investigation theme "RBAC trends and limitations" in 4 different sources related to health informatics or to the engineering technical field. To do so, we have applied the following search query string: "Role-Based Access Control" OR "RBAC" AND "Health information System" OR "EHR" AND "Trends" OR "Challenges" OR "Security" OR "Authorization" OR "Attacks" OR "Permission Assignment" OR "Permission Relation" OR "Permission Mapping" OR "Constraint". We followed PRISMA applicable flow and general methodology used on software engineering for systematic review. 20 articles were selected after applying inclusion and exclusion criteria resulting contributions from 10 different countries. 17 articles advocate RBAC adaptations. The main security trends and limitations mapped were related to emergency access, grant delegation, and interdomain access control. Several publishing proposed RBAC adaptations and enhancements in order to cope current HIS use characteristics. Most of the existent RBAC studies are not related to health informatics industry though. There is no clear indication of RBAC obsolescence for HIS use.

  2. The data and system Nikkei Telecom "Industry/Technology Information Service"

    NASA Astrophysics Data System (ADS)

    Kurata, Shizuya; Sueyoshi, Yukio

    Nihoh Keizai Shimbun started supplying "Industry/Technology Information Service" from July 1989 as a part of Nikkei Telecom Package, which is online information service using personal computers for its terminals. Previously Nikkei's database service mainly covered such areas as economy, corporations and markets. On the other hand, the new "Industry/Technology Information Service" (main data covers industry by industry information-semi macro) is attracting a good deal of attention as it is the first to supply science and technology related database which has not been touched before. Moreover it is attracting attention technically as it has an access by gateway system to JOIS which is the first class science technology file in Japan. This report introduces data and system of "Industry/Technology Information Service" briefly.

  3. A quantitative profile of the patent medicine industry in Baltimore from 1863 to 1930.

    PubMed

    Torbenson, Michael; Erlen, Jonathon

    2007-01-01

    At least 661 unique patent medicine manufacturers promoted their nostrums in Baltimore from 1863 to 1930. The industry saw its greatest growth from 1880 to 1900 and peaked in 1907. Overall, about 7% of these companies were owned by women and 4% by African-Americans. Based on the short life span of most companies, the business environment appears to have been very competitive. The patent medicine industry began a steady decline after 1907 and by 1930 had lost nearly 40% of the companies. The temporal correlation of this decline with the passage of the Food and Drugs Act of 1906 argues strongly that this legislation was an important contributor to the decline of the industry.

  4. Profile of the wood furniture and fixtures industry. EPA Office of Compliance sector notebook project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-09-01

    The furniture and fixtures industry encompasses companies that manufacture household, office, store, public building, and restaurant furniture and fixtures. The second section provides background information on the size, geographic distribution, employment, production, sales, and economic condition of the Wood Furniture and Fixtures industry. The type of facilities described within the document are also described in terms of their Standard Industrial Classification (SIC) codes. Additionally, this section contains a list of the largest companies in terms of sales.

  5. Evaluating two-dimensional electrophoresis profiles of the protein phaseolin as markers of genetic differentiation and seed protein quality in common bean (Phaseolus vulgaris L.).

    PubMed

    López-Pedrouso, María; Bernal, Javier; Franco, Daniel; Zapata, Carlos

    2014-07-23

    High-resolution two-dimensional electrophoresis (2-DE) profiles of the protein phaseolin, the major seed storage protein of common bean, display great number of spots with differentially glycosylated and phosphorylated α- and β-type polypeptides. This work aims to test whether these complex profiles can be useful markers of genetic differentiation and seed protein quality in bean populations. The 2-DE phaseolin profile and the amino acid composition were examined in bean seeds from 18 domesticated and wild accessions belonging to the Mesoamerican and Andean gene pools. We found that proteomic distances based on 2-DE profiles were successful in identifying the accessions belonging to each gene pool and outliers distantly related. In addition, accessions identified as outliers from proteomic distances showed the highest levels of methionine content, an essential amino acid deficient in bean seeds. These findings suggest that 2-DE phaseolin profiles provide valuable information with potential of being used in common bean genetic improvement.

  6. Latent Profiles of Perceived Time Adequacy for Paid Work, Parenting, and Partner Roles

    PubMed Central

    Lee, Soomi; Almeida, David M.; Davis, Kelly D.; King, Rosalind B.; Hammer, Leslie B.; Kelly, Erin L.

    2015-01-01

    This study examined feelings of having enough time (i.e., perceived time adequacy) in a sample of employed parents (N=880) in information technology and extended-care industries. Adapting a person-centered latent profile approach, we identified three profiles of perceived time adequacy for paid work, parenting, and partner roles: Family Time Protected, Family Time Sacrificed, and Time Balanced. Drawing upon the Conservation of Resources theory (Hobfòll, 1989), we examined the associations of stressors and resources with the time adequacy profiles. Parents in the Family Time Sacrificed profile were more likely to be younger, women, have younger children, work in the extended-care industry, and have nonstandard work schedules compared to those in the Family Time Protected profile. Results from multinomial logistic regression analyses revealed that, with the Time Balanced profile as the reference group, having fewer stressors and more resources in the family context (less parent-child conflict and more partner support), work context (longer company tenure, higher schedule control and job satisfaction), and work-family interface (lower work-to-family conflict) was linked to a higher probability of membership in the Family Time Protected profile. By contrast, having more stressors and fewer resources, in the forms of less partner support and higher work-to-family conflict, predicted a higher likelihood of being in the Family Time Sacrificed profile. Our findings suggest that low work-to-family conflict is the most critical predictor of membership in the Family Time Protected profile, whereas lack of partner support is the most important factor to be included in the Family Time Sacrificed profile. PMID:26075739

  7. Latent profiles of perceived time adequacy for paid work, parenting, and partner roles.

    PubMed

    Lee, Soomi; Almeida, David M; Davis, Kelly D; King, Rosalind B; Hammer, Leslie B; Kelly, Erin L

    2015-10-01

    This study examined feelings of having enough time (i.e., perceived time adequacy) in a sample of employed parents (N = 880) in information technology and extended-care industries. Adapting a person-centered latent profile approach, we identified 3 profiles of perceived time adequacy for paid work, parenting, and partner roles: family time protected, family time sacrificed, and time balanced. Drawing upon the conservation of resources theory (Hobfòll, 1989), we examined the associations of stressors and resources with the time adequacy profiles. Parents in the family time sacrificed profile were more likely to be younger, women, have younger children, work in the extended-care industry, and have nonstandard work schedules compared to those in the family time protected profile. Results from multinomial logistic regression analyses revealed that, with the time balanced profile as the reference group, having fewer stressors and more resources in the family context (less parent-child conflict and more partner support), work context (longer company tenure, higher schedule control and job satisfaction), and work-family interface (lower work-to-family conflict) was linked to a higher probability of membership in the family time protected profile. By contrast, having more stressors and fewer resources, in the forms of less partner support and higher work-to-family conflict, predicted a higher likelihood of being in the family time sacrificed profile. Our findings suggest that low work-to-family conflict is the most critical predictor of membership in the family time protected profile, whereas lack of partner support is the most important factor to be included in the family time sacrificed profile. (c) 2015 APA, all rights reserved).

  8. Different profiles of quercetin metabolites in rat plasma: comparison of two administration methods.

    PubMed

    Kawai, Yoshichika; Saito, Satomi; Nishikawa, Tomomi; Ishisaka, Akari; Murota, Kaeko; Terao, Junji

    2009-03-23

    The bioavailability of polyphenols in human and rodents has been discussed regarding their biological activity. We found different metabolite profiles of quercetin in rat plasma between two administration procedures. A single intragastric administration (50 mg/kg) resulted in the appearance of a variety of metabolites in the plasma, whereas only a major fraction was detected by free access (1% quercetin). The methylated/non-methylated metabolites ratio was much higher in the free access group. Mass spectrometric analyses showed that the fraction from free access contained highly conjugated quercetin metabolites such as sulfo-glucuronides of quercetin and methylquercetin. The metabolite profile of human plasma after an intake of onion was similar to that with intragastric administration in rats. In vitro oxidation of human low-density lipoprotein showed that methylation of the catechol moiety of quercetin significantly attenuated the antioxidative activity. These results might provide information about the bioavailability of quercetin when conducting animal experiments.

  9. Teaching trainees to negotiate research collaborations with industry: a mentorship model.

    PubMed

    Merrill, David B; Girgis, Ragy R; Bickford, Lincoln C; Vorel, Stanislav R; Lieberman, Jeffrey A

    2010-04-01

    Research collaborations with the pharmaceutical industry can offer valuable opportunities for academic psychiatrists to gain access to important resources. Such relationships, however, often produce significant conflicts of interest, and recent attention has focused on the ways in which these conflicts can compromise research integrity. Psychiatric residents generally receive little education about industry-academia interactions. The authors report their experience collaborating on a research project with representatives of a pharmaceutical company, and they propose a model for teaching psychiatric trainees responsible and productive engagement with industry investigators.

  10. An operational data access infrastructure for accessing integrated environmental and socio-economic data from the Dutch Wadden Sea

    NASA Astrophysics Data System (ADS)

    De Bruin, T.

    2012-12-01

    The Wadden Sea, an UNESCO World Heritage Site along the Northern coasts of The Netherlands, Germany and Denmark, is a very valuable, yet also highly vulnerable tidal flats area. Knowledge is key to the sustainable management of the Wadden Sea. This knowledge should be reliable, founded on promptly accessible information and sufficiently broad to integrate both ecological and economic analyses. The knowledge is gained from extensive monotoring of both ecological and socio-economic parameters. Even though many organisations, research institutes, government agencies and NGOs carry out monitoring, there is no central overview of monitoring activities, nor easy access to the resulting data. The 'Wadden Sea Long-Term Ecosystem Research' (WaLTER) project (2011-2015) aims to set-up an integrated monitoring plan for the main environmental and management issues relevant to the Wadden Sea, such as sea-level rise, fisheries management, recreation and industry activities. The WaLTER data access infrastructure will be a distributed system of data providers, with a centralized data access portal. It is based on and makes use of the existing data access infrastructure of the Netherlands National Oceanographic Data Committee (NL-NODC), which has been operational since early 2009. The NL-NODC system is identical to and in fact developed by the European SeaDataNet project, furthering standardisation on a pan-European scale. The presentation will focus on the use of a distributed data access infrastructure to address the needs of different user groups such as policy makers, scientists and the general public.

  11. Reprint Filing: A Profile-Based Solution

    PubMed Central

    Gass, David A.; Putnam, R. Wayne

    1983-01-01

    A reprint filing system based on practice profiles can give family physicians easy access to relevant medical information. The use of the ICHPPC classification and some supplemental categories provides a more practical coding mechanism than organ systems, textbook chapter titles or even Index Medicus subject headings. The system can be simply maintained, updated and improved, but users must regularly weed out unused information, and read widely to keep the reprints current. PMID:21283301

  12. 'Public enemy no. 1': Tobacco industry funding for the AIDS response.

    PubMed

    Smith, Julia; Thompson, Sheryl; Lee, Kelley

    2016-01-01

    This article analyzes the history of tobacco industry funding for the AIDS response - a largely ignored aspect of private donor involvement. Primary documents from the Legacy Tobacco Documents Library and AIDS organizations are analyzed, alongside existing literature on the tobacco control and AIDS responses. Research on the tactics of transnational tobacco companies has documented how they have used various charitable causes to subvert tobacco control efforts and influence public health policy. This raises questions, which this paper seeks to answer, about if donations by tobacco companies to AIDS organizations have been used for similar means, and if so how AIDS organizations have responded to tobacco industry overtures. Two examples illustrate how tobacco companies initially tried to use the AIDS response to counter tobacco control measures: (1) During the 1990s, Philip Morris, one of the largest corporate donors of the AIDS response in the USA, used its connections with AIDS organizations to create competition for health resources, improve its reputation, and market tobacco products to the LGBT community; (2) In both Latin America and sub-Saharan Africa, Philip Morris and British American Tobacco championed the AIDS response in order to delegitimize efforts to develop the World Health Organization's Framework Convention on Tobacco Control. However, from the late 1990s onwards, AIDS organizations began to refuse tobacco funding and partnerships - though these policies have been not comprehensive, as many tobacco companies still fund programs in sub-Saharan Africa. The article concludes that tobacco companies aimed to exploit competition between health issues, and use the high-profile AIDS response to improve their reputation and market access. However, AIDS organizations, adhering to broader health goals and drawing on extensive resources and networks, were able to shut the tobacco industry out of much of the response, though pockets of influence still exist

  13. A high resolution hand-held focused beam profiler

    NASA Astrophysics Data System (ADS)

    Zapata-Farfan, J.; Garduño-Mejía, J.; Rosete-Aguilar, M.; Ascanio, G.; Román-Moreno, C. J.

    2017-05-01

    The shape of a beam is important in any laser application and depending on the final implementation, there exists a preferred one which is defined by the irradiance distribution.1 The energy distribution (or laser beam profile) is an important parameter in a focused beam, for instance, in laser cut industry, where the beam shape determines the quality of the cut. In terms of alignment and focusing, the energy distribution also plays an important role since the system must be configured in order to reduce the aberration effects and achieve the highest intensity. Nowadays a beam profiler is used in both industry and research laboratories with the aim to characterize laser beams used in free-space communications, focusing and welding, among other systems. The purpose of the profile analyzers is to know the main parameters of the beam, to control its characteristics as uniformity, shape and beam size as a guide to align the focusing system. In this work is presented a high resolution hand-held and compact design of a beam profiler capable to measure at the focal plane, with covered range from 400 nm to 1000 nm. The detection is reached with a CMOS sensor sized in 3673.6 μm x 2738.4 μm which acquire a snap shot of the previously attenuated focused beam to avoid the sensor damage, the result is an image of beam intensity distribution, which is digitally processed with a RaspberryTMmodule gathering significant parameters such as beam waist, centroid, uniformity and also some aberrations. The profiler resolution is 1.4 μm and was probed and validated in three different focusing systems. The spot sizes measurements were compared with the Foucault knife-edge test.

  14. Information technology in pharmacovigilance: Benefits, challenges, and future directions from industry perspectives.

    PubMed

    Lu, Zhengwu

    2009-01-01

    Risk assessment during clinical product development needs to be conducted in a thorough and rigorous manner. However, it is impossible to identify all safety concerns during controlled clinical trials. Once a product is marketed, there is generally a large increase in the number of patients exposed, including those with comorbid conditions and those being treated with concomitant medications. Therefore, postmarketing safety data collection and clinical risk assessment based on observational data are critical for evaluating and characterizing a product's risk profile and for making informed decisions on risk minimization. Information science promises to deliver effective e-clinical or e-health solutions to realize several core benefits: time savings, high quality, cost reductions, and increased efficiencies with safer and more efficacious medicines. The development and use of standard-based pharmacovigilance system with integration connection to electronic medical records, electronic health records, and clinical data management system holds promise as a tool for enabling early drug safety detections, data mining, results interpretation, assisting in safety decision making, and clinical collaborations among clinical partners or different functional groups. The availability of a publicly accessible global safety database updated on a frequent basis would further enhance detection and communication about safety issues. Due to recent high-profile drug safety problems, the pharmaceutical industry is faced with greater regulatory enforcement and increased accountability demands for the protection and welfare of patients. This changing climate requires biopharmaceutical companies to take a more proactive approach in dealing with drug safety and pharmacovigilance.

  15. Framing access to medicines in developing countries: an analysis of media coverage of Canada's Access to Medicines Regime.

    PubMed

    Esmail, Laura C; Phillips, Kaye; Kuek, Victoria; Cosio, Andrea Perez; Kohler, Jillian Clare

    2010-01-04

    In September 2003, the Canadian government committed to developing legislation that would facilitate greater access to affordable medicines for developing countries. Over the course of eight months, the legislation, now known as Canada's Access to Medicines Regime (CAMR), went through a controversial policy development process and the newspaper media was one of the major venues in which the policy debates took place. The purpose of this study was to examine how the media framed CAMR to determine how policy goals were conceptualized, which stakeholder interests controlled the public debate and how these variables related to the public policy process. We conducted a qualitative content analysis of newspaper coverage of the CAMR policy and implementation process from 2003-2008. The primary theoretical framework for this study was framing theory. A total of 90 articles from 11 Canadian newspapers were selected for inclusion in our analysis. A team of four researchers coded the articles for themes relating to access to medicines and which stakeholders' voice figured more prominently on each issue. Stakeholders examined included: the research-based industry, the generic industry, civil society, the Canadian government, and developing country representatives. The most frequently mentioned themes across all documents were the issues of drug affordability, intellectual property, trade agreements and obligations, and development. Issues such as human rights, pharmaceutical innovation, and economic competitiveness got little media representation. Civil society dominated the media contents, followed far behind by the Canadian government, the research-based and generic pharmaceutical industries. Developing country representatives were hardly represented in the media. Media framing obscured the discussion of some of the underlying policy goals in this case and failed to highlight issues which are now significant barriers to the use of the legislation. Using the media to engage

  16. Framing access to medicines in developing countries: an analysis of media coverage of Canada's Access to Medicines Regime

    PubMed Central

    2010-01-01

    Background In September 2003, the Canadian government committed to developing legislation that would facilitate greater access to affordable medicines for developing countries. Over the course of eight months, the legislation, now known as Canada's Access to Medicines Regime (CAMR), went through a controversial policy development process and the newspaper media was one of the major venues in which the policy debates took place. The purpose of this study was to examine how the media framed CAMR to determine how policy goals were conceptualized, which stakeholder interests controlled the public debate and how these variables related to the public policy process. Methods We conducted a qualitative content analysis of newspaper coverage of the CAMR policy and implementation process from 2003-2008. The primary theoretical framework for this study was framing theory. A total of 90 articles from 11 Canadian newspapers were selected for inclusion in our analysis. A team of four researchers coded the articles for themes relating to access to medicines and which stakeholders' voice figured more prominently on each issue. Stakeholders examined included: the research-based industry, the generic industry, civil society, the Canadian government, and developing country representatives. Results The most frequently mentioned themes across all documents were the issues of drug affordability, intellectual property, trade agreements and obligations, and development. Issues such as human rights, pharmaceutical innovation, and economic competitiveness got little media representation. Civil society dominated the media contents, followed far behind by the Canadian government, the research-based and generic pharmaceutical industries. Developing country representatives were hardly represented in the media. Conclusions Media framing obscured the discussion of some of the underlying policy goals in this case and failed to highlight issues which are now significant barriers to the use of the

  17. Where Are the Women? A Report into Issues Related to Women's Access to Workplace Literacy Programs.

    ERIC Educational Resources Information Center

    Milton, Marion

    A study investigated provision of workplace literacy courses available for women in female-dominated industries and women's access to and participation in those courses. A literature review revealed very little research on the required increased literacy skills in Australia and no previous studies on women's access to workplace literacy courses in…

  18. Hospitality and Facility Care Services. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for hospitality and facility care occupations. The list contains units (with and without subunits), competencies, and…

  19. Food Production, Management and Services. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for food production, management, and service occupations. The list contains units (with and without subunits),…

  20. Applications of aerospace technology in industry. A technology transfer profile: Food technology

    NASA Technical Reports Server (NTRS)

    Murray, D. M.

    1971-01-01

    Food processing and preservation technologies are reviewed, expected technological advances are considered including processing and market factors. NASA contributions to food technology and nutrition are presented with examples of transfer from NASA to industry.

  1. Efficacy of Allium cepa test system for screening cytotoxicity and genotoxicity of industrial effluents originated from different industrial activities.

    PubMed

    Pathiratne, Asoka; Hemachandra, Chamini K; De Silva, Nimal

    2015-12-01

    Efficacy of Allium cepa test system for screening cytotoxicity and genotoxicity of treated effluents originated from four types of industrial activities (two textile industries, three rubber based industries, two common treatment plants of industrial zones, and two water treatment plants) was assessed. Physico-chemical parameters including the heavy metal/metalloid levels of the effluents varied depending on the industry profile, but most of the measured parameters in the effluents were within the specified tolerance limits of Sri Lankan environmental regulations for discharge of industrial effluents into inland surface waters. In the A. cepa test system, the undiluted effluents induced statistically significant root growth retardation, mitosis depression, and chromosomal aberrations in root meristematic cells in most cases in comparison to the dilution water and upstream water signifying effluent induced cytotoxicity and genotoxicity. Ethyl methane sulphonate (a mutagen, positive control) and all the effluents under 1:8 dilution significantly induced total chromosomal aberrations in root meristematic cells in comparison to the dilution water and upstream water indicating inadequacy of expected 1:8 dilutions in the receiving waters for curtailing genotoxic impacts. The results support the use of a practically feasible A. cepa test system for rapid screening of cytotoxicity and genotoxicity of diverse industrial effluents discharging into inland surface waters.

  2. Applications of aerospace technology in industry, a technology transfer profile: Lubrication

    NASA Technical Reports Server (NTRS)

    Kottenstette, J. P.; Freeman, J. E.; Heins, C. R.; Hildred, W. M.; Johnson, F. D.; Staskin, E. R.

    1971-01-01

    Technology transfer in the lubrication field is discussed in terms of the movement of NASA-generated lubrication technology into the private sector as affected by evolving industrial requirements. An overview of the field is presented, and NASA technical contributions to lubrication technology are described. Specific examples in which these technologies have been used in the private sector are summarized.

  3. Industry in motion: using smart phones to explore the spatial network of the garment industry in New York City.

    PubMed

    Williams, Sarah; Currid-Halkett, Elizabeth

    2014-01-01

    Industrial agglomerations have long been thought to offer economic and social benefits to firms and people that are only captured by location within their specified geographies. Using the case study of New York City's garment industry along with data acquired from cell phones and social media, this study set out to understand the discrete activities underpinning the economic dynamics of an industrial agglomeration. Over a two week period, data was collected by employing the geolocative capabilities of Foursquare, a social media application, to record every movement of fashion workers employed at fashion design firms located both inside and outside the geographical boundaries of New York City's Garment District. This unique method of studying worker activity exposed the day-to-day dynamics of an industrial district with a precision thus far undocumented in literature. Our work suggests that having access to the cluster provides almost the same agglomeration economies as residing within its borders.

  4. Industry in Motion: Using Smart Phones to Explore the Spatial Network of the Garment Industry in New York City

    PubMed Central

    Williams, Sarah; Currid-Halkett, Elizabeth

    2014-01-01

    Industrial agglomerations have long been thought to offer economic and social benefits to firms and people that are only captured by location within their specified geographies. Using the case study of New York City’s garment industry along with data acquired from cell phones and social media, this study set out to understand the discrete activities underpinning the economic dynamics of an industrial agglomeration. Over a two week period, data was collected by employing the geo-locative capabilities of Foursquare, a social media application, to record every movement of fashion workers employed at fashion design firms located both inside and outside the geographical boundaries of New York City’s Garment District. This unique method of studying worker activity exposed the day-to-day dynamics of an industrial district with a precision thus far undocumented in literature. Our work suggests that having access to the cluster provides almost the same agglomeration economies as residing within its borders. PMID:24505256

  5. Perspectives on the agrochemical industry and agrochemical discovery.

    PubMed

    Sparks, Thomas C; Lorsbach, Beth A

    2017-04-01

    Agrochemicals have been critical to the production of food and fiber, as well as the control of vectors of disease. The need for the discovery and development of new agrochemicals continues unabated due to the loss of existing products through the development of resistance, the desire for products with more favorable environmental and toxicological profiles, shifting pest spectra, and changing agricultural needs and practices. As presented in the associated analysis of the agrochemical industry, the rising costs and complexities of agrochemical discovery have, in part, led to increasing consolidation, especially in the USA and Europe. However, as demonstrated by the present analysis, the discovery of new agrochemicals continues in spite of the challenges. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  6. 2013 mask industry survey

    NASA Astrophysics Data System (ADS)

    Malloy, Matt

    2013-09-01

    A comprehensive survey was sent to merchant and captive mask shops to gather information about the mask industry as an objective assessment of its overall condition. 2013 marks the 12th consecutive year for this process. Historical topics including general mask profile, mask processing, data and write time, yield and yield loss, delivery times, maintenance, and returns were included and new topics were added. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the mask industry. While each year's survey includes minor updates based on feedback from past years and the need to collect additional data on key topics, the bulk of the survey and reporting structure have remained relatively constant. A series of improvements is being phased in beginning in 2013 to add value to a wider audience, while at the same time retaining the historical content required for trend analyses of the traditional metrics. Additions in 2013 include topics such as top challenges, future concerns, and additional details in key aspects of mask masking, such as the number of masks per mask set per ground rule, minimum mask resolution shipped, and yield by ground rule. These expansions beyond the historical topics are aimed at identifying common issues, gaps, and needs. They will also provide a better understanding of real-life mask requirements and capabilities for comparison to the International Technology Roadmap for Semiconductors (ITRS).

  7. Energy access and living standards: some observations on recent trends

    NASA Astrophysics Data System (ADS)

    Rao, Narasimha D.; Pachauri, Shonali

    2017-02-01

    A subset of Sustainable Development Goals pertains to improving people’s living standards at home. These include the provision of access to electricity, clean cooking energy, improved water and sanitation. We examine historical progress in energy access in relation to other living standards. We assess regional patterns in the pace of progress and relative priority accorded to these different services. Countries in sub-Saharan Africa would have to undergo unprecedented rates of improvement in energy access in order to achieve the goal of universal electrification by 2030. World over, access to clean cooking fuels and sanitation facilities consistently lag improved water and electricity access by a large margin. These two deprivations are more concentrated among poor countries, and poor people in middle income countries. They are also correlated to health risks faced disproportionately by women. However, some Asian countries have been able to achieve faster progress in electrification at lower income levels compared to industrialized countries’ earlier efforts. These examples offer hope that future efforts need not be constrained by historical rates of progress.

  8. Online Searching of Bibliographic Databases: Microcomputer Access to National Information Systems.

    ERIC Educational Resources Information Center

    Coons, Bill

    This paper describes the range and scope of various information databases available for technicians, researchers, and managers employed in forestry and the forest products industry. Availability of information on reports of field and laboratory research, business trends, product prices, and company profiles through national distributors of…

  9. Disadvantaged Young People Accessing the New Urban Economies of the Post-Industrial City

    ERIC Educational Resources Information Center

    Raffo, Carlo

    2006-01-01

    The aim of the paper is to examine current and evolving supply side transition policy initiatives in the light of (a) particular demand side needs of urban young people classified as those most disadvantaged and potentially marginalized; and (b) the emerging realities of accessing and operating within particular examples of high value-added…

  10. The Economic Impact of Vermont's Child Care Industry.

    ERIC Educational Resources Information Center

    2002

    This report documents the relationship between the supply of reliable, affordable, accessible child care and the health of Vermont's economy. The child care industry is a growing part of the Vermont economy, pumping money into local communities by supporting working families, creating jobs, and generating taxes through employment and the purchase…

  11. Measurement of Interfacial Profiles of Wavy Film Flow on Inclined Wall

    NASA Astrophysics Data System (ADS)

    Rosli, N.; Amagai, K.

    2016-02-01

    Falling liquid films on inclined wall present in many industrial processes such as in food processing, seawater desalination and electronic devices manufacturing industries. In order to ensure an optimal efficiency of the operation in these industries, a fundamental study on the interfacial flow profiles of the liquid film is of great importance. However, it is generally difficult to experimentally predict the interfacial profiles of liquid film flow on inclined wall due to the instable wavy flow that usually formed on the liquid film surface. In this paper, the liquid film surface velocity was measured by using a non-intrusive technique called as photochromic dye marking method. This technique utilizes the color change of liquid containing the photochromic dye when exposed to the UV light source. The movement of liquid film surface marked by the UV light was analyzed together with the wave passing over the liquid. As a result, the liquid film surface was found to slightly shrink its gradual movement when approached by the wave before gradually move again after the intersection with the wave.

  12. 19. INTAKE CONDUITS, PROFILE, SECTIONS, AND DETAILS, SHEET 10 OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. INTAKE CONDUITS, PROFILE, SECTIONS, AND DETAILS, SHEET 10 OF 117, 1920. - Sacramento River Water Treatment Plant Intake Pier & Access Bridge, Spanning Sacramento River approximately 175 feet west of eastern levee on river; roughly .5 mile downstream from confluence of Sacramento & American Rivers, Sacramento, Sacramento County, CA

  13. Market niche analysis in the casino gaming industry.

    PubMed

    Dandurand, L

    1990-03-01

    This article discusses the nature of market niche analysis in the casino gaming industry. It presents four approaches for conducting market niche analysis. An an example of one approach, the Las Vegas Visitor Profile Study is used to identify a premium niche in the Las Vegas Slot Target Market. A detailed examination of the premium niche profile provides a description of the typical premium slot player. The description of the typical premium player leads to hypotheses regarding needs (the unique preference set) of the premium player. An analysis of the unique preference set suggests an appropriate enhanced marketing program.

  14. Rational Modular RNA Engineering Based on In Vivo Profiling of Structural Accessibility.

    PubMed

    Leistra, Abigail N; Amador, Paul; Buvanendiran, Aishwarya; Moon-Walker, Alex; Contreras, Lydia M

    2017-12-15

    Bacterial small RNAs (sRNAs) have been established as powerful parts for controlling gene expression. However, development and application of engineered sRNAs has primarily focused on regulating novel synthetic targets. In this work, we demonstrate a rational modular RNA engineering approach that uses in vivo structural accessibility measurements to tune the regulatory activity of a multisubstrate sRNA for differential control of its native target network. Employing the CsrB global sRNA regulator as a model system, we use published in vivo structural accessibility data to infer the contribution of its local structures (substructures) to function and select a subset for engineering. We then modularly recombine the selected substructures, differentially representing those of presumed high or low functional contribution, to build a library of 21 CsrB variants. Using fluorescent translational reporter assays, we demonstrate that the CsrB variants achieve a 5-fold gradient of control of well-characterized Csr network targets. Interestingly, results suggest that less conserved local structures within long, multisubstrate sRNAs may represent better targets for rational engineering than their well-conserved counterparts. Lastly, mapping the impact of sRNA variants on a signature Csr network phenotype indicates the potential of this approach for tuning the activity of global sRNA regulators in the context of metabolic engineering applications.

  15. Study of the Economic and Rehabilitative Aspects of Prison Industry. Technical Tasks and Results.

    ERIC Educational Resources Information Center

    National Inst. of Law Enforcement and Criminal Justice (Dept. of Justice/LEAA), Washington, DC.

    This volume analyzes existing and proposed correctional industries in Connecticut. First, the results of a survey made to determine the potential inmate work force for prison industry are presented as inmate profiles, descriptions of inmate and supervisor attitudes, and analyses of parolees' employment and recidivism rates. In part 2, four…

  16. Establishing a Secure Data Center with Remote Access: Preprint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gonder, J.; Burton, E.; Murakami, E.

    2012-04-01

    Access to existing travel data is critical for many analysis efforts that lack the time or resources to support detailed data collection. High-resolution data sets provide particular value, but also present a challenge for preserving the anonymity of the original survey participants. To address this dilemma of providing data access while preserving privacy, the National Renewable Energy Laboratory and the U.S. Department of Transportation have launched the Transportation Secure Data Center (TSDC). TSDC data sets include those from regional travel surveys and studies that increasingly use global positioning system devices. Data provided by different collecting agencies varies with respect tomore » formatting, elements included and level of processing conducted in support of the original purpose. The TSDC relies on a number of geospatial and other analysis tools to ensure data quality and to generate useful information outputs. TSDC users can access the processed data in two different ways. The first is by downloading summary results and second-by-second vehicle speed profiles (with latitude/longitude information removed) from a publicly-accessible website. The second method involves applying for a remote connection account to a controlled-access environment where spatial analysis can be conducted, but raw data cannot be removed.« less

  17. Social networking profile correlates of schizotypy

    PubMed Central

    Martin, Elizabeth A.; Bailey, Drew H.; Cicero, David C.; Kerns, John G.

    2015-01-01

    Social networking sites, such as Facebook, are extremely popular and have become a primary method for socialization and communication. Despite a report of increased use among those on the schizophrenia-spectrum, few details are known about their actual practices. In the current research, undergraduate participants completed measures of schizotypy and personality, and provided access to their Facebook profiles. Information from the profiles were then systematically coded and compared to the questionnaire data. As predicted, social anhedonia (SocAnh) was associated with a decrease in social participation variables, including a decrease in number of friends and number of photos, and an increase in length of time since communication with a friend, but SocAnh was also associated with an increase in profile length. Also, SocAnh was highly correlated with extraversion. Relatedly, extraversion uniquely predicted the number of friends and photos and length of time since communication with a friend. In addition, perceptual aberration/magical ideation (PerMag) was associated with an increased number of “black outs” on Facebook profile print-outs, a measure of paranoia. Overall, results from this naturalistic-like study show that SocAnh and extraversion are associated with decreased social participation and PerMag with increased paranoia related to information on social networking sites. PMID:22796101

  18. Profiles of Major Suppliers to the Automotive Industry : Vol. 2. Iron, Steel and Aluminum Suppliers to the Automotive Industry

    DOT National Transportation Integrated Search

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  19. Performance profiles of major energy producers, 1997

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1999-01-01

    The energy industry generally and petroleum and natural gas operations in particular are frequently reacting to a variety of unsettling forces. Falling oil prices, economic upswings, currency devaluations, increasingly rigorous environmental quality standards, deregulation of electricity markets, and continued advances in exploration and production technology were among the challenges and opportunities to the industry in 1997. To analyze the extent to which these and other developments have affected energy industry financial and operating performance, strategies, and industry structure, the Energy Information Administration (EIA) maintains the Financial Reporting Systems (FRS). Through Form EIA-28, major US energy companies annually report to themore » FRS. Financial and operating information is reported by major lines of business, including oil and gas production (upstream), petroleum refining and marketing (downstream), other energy operations, and nonenergy business. Performance Profiles of Major Producers 1997 examines the interplays of energy markets, companies` strategies, and government policies (in 1997 and in historical context) that gave rise to the results given here. The report also analyzes other key aspects of energy company financial performance as seen through the multifaceted lens provided by the FRS data and complementary data for industry overall. 41 figs., 77 tabs.« less

  20. [Occupational asthma: Clinical and professional profile of the Tunisian asthmatic worker].

    PubMed

    Toujani, S; Hedhli, A; Mjid, M; Ben Salah, N; Ouahchy, Y; Louzir, B; Daghfous, J; Mhiri, N; Cherif, J; Beji, M

    2016-08-01

    Asthma takes up a great importance in occupational diseases but remains underestimated as it is insufficiently diagnosed. We aimed to access the clinical and professional profile of the Tunisian asthmatic worker. It was a retrospective descriptive study in a professional pathology unit in a university hospital. All patients referred by their doctor for symptoms suggestive of occupational asthma, during a period from 2000 to 2008, were included. Forty-eight patients were selected from 172. The mean age was 40 years, with a male predominance (56 %). In 2/3 of the cases, it was the textile workers, food and chemical industry. The etiological agents incriminated were textile dust in 18.8 % of cases followed by isocyanates and flour. Typical episodes of wheezing dyspnea were present in 52 % and atopy in 54.2 % of workers. In 2 % of cases, symptoms disappeared and worsened in 18.8 %. The prognosis of OA depends on early end accurate diagnosis. The physician's role is to initiate the appropriate diagnostic approach, which must comply with the Tunisian conditions. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  1. 28 CFR 17.46 - Access by persons outside the Executive Branch.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... subject to the National Industrial Security Program require access to classified information originated by... Branch. 17.46 Section 17.46 Judicial Administration DEPARTMENT OF JUSTICE CLASSIFIED NATIONAL SECURITY... propriety of such action, in the interest of the national security, and must approve the release. Prior to...

  2. Pervasive Radio Mapping of Industrial Environments Using a Virtual Reality Approach

    PubMed Central

    Nedelcu, Adrian-Valentin; Machedon-Pisu, Mihai; Talaba, Doru

    2015-01-01

    Wireless communications in industrial environments are seriously affected by reliability and performance issues, due to the multipath nature of obstacles within such environments. Special attention needs to be given to planning a wireless industrial network, so as to find the optimum spatial position for each of the nodes within the network, and especially for key nodes such as gateways or cluster heads. The aim of this paper is to present a pervasive radio mapping system which captures (senses) data regarding the radio spectrum, using low-cost wireless sensor nodes. This data is the input of radio mapping algorithms that generate electromagnetic propagation profiles. Such profiles are used for identifying obstacles within the environment and optimum propagation pathways. With the purpose of further optimizing the radio planning process, the authors propose a novel human-network interaction (HNI) paradigm that uses 3D virtual environments in order to display the radio maps in a natural, easy-to-perceive manner. The results of this approach illustrate its added value to the field of radio resource planning of industrial communication systems. PMID:26167533

  3. Pervasive Radio Mapping of Industrial Environments Using a Virtual Reality Approach.

    PubMed

    Nedelcu, Adrian-Valentin; Machedon-Pisu, Mihai; Duguleana, Mihai; Talaba, Doru

    2015-01-01

    Wireless communications in industrial environments are seriously affected by reliability and performance issues, due to the multipath nature of obstacles within such environments. Special attention needs to be given to planning a wireless industrial network, so as to find the optimum spatial position for each of the nodes within the network, and especially for key nodes such as gateways or cluster heads. The aim of this paper is to present a pervasive radio mapping system which captures (senses) data regarding the radio spectrum, using low-cost wireless sensor nodes. This data is the input of radio mapping algorithms that generate electromagnetic propagation profiles. Such profiles are used for identifying obstacles within the environment and optimum propagation pathways. With the purpose of further optimizing the radio planning process, the authors propose a novel human-network interaction (HNI) paradigm that uses 3D virtual environments in order to display the radio maps in a natural, easy-to-perceive manner. The results of this approach illustrate its added value to the field of radio resource planning of industrial communication systems.

  4. Developing Customized Programs for Steel and Other Heavy Industries.

    ERIC Educational Resources Information Center

    Day, Philip R., Jr.

    1984-01-01

    Describes Dundalk Community College's (DCC's) customized training programs for local industries. Looks at employment problems and outlook in Baltimore County, the development of a training agreement with Bethlehem Steel, the use of the Developing a Curriculum (DACUM) process to develop skill profiles, and future directions. (DMM)

  5. Expanding Access to Quality Pre-K Is Sound Public Policy

    ERIC Educational Resources Information Center

    Barnett, W. Steven

    2013-01-01

    In 2013, preschool education received more attention in the media and public policy circles than it has for some time, in part because of a series of high-profile proposals to expand access to quality pre-K. The scientific basis for these proposed expansions of quality pre-K is impressive. This paper brings to bear the full weight of the evidence…

  6. Profiles of Major Suppliers to the Automotive Industry : Vol. 3. Plastics, Glass and Fiberglass Suppliers to the Automotive Industry

    DOT National Transportation Integrated Search

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study was to ...

  7. Superficial Femoral Artery Intervention by Single Transpedal Arterial Access.

    PubMed

    Amoroso, Nicholas S; Shah, Sooraj; Liou, Michael; Ratcliffe, Justin; Lala, Moinakhtar; Diwan, Ravi; Huang, Yili; Rosero, Hugo; Coppola, John; Bertrand, Olivier F; Kwan, Tak W

    2015-11-01

    Atherosclerotic disease of the superficial femoral artery (SFA) is frequently seen and can be treated with percutaneous interventions, traditionally via femoral artery access. There are limited reports of transpedal artery access for peripheral artery interventions, but none to date describing routine primary transpedal artery approach for SFA stenting. In this preliminary study, we report 4 patients who underwent successful endovascular SFA stenting using a single transpedal artery access via a new ultra-low profile 6 Fr sheath (Glidesheath Slender; Terumo Corporation). All patients underwent successful SFA stenting without complication. Procedure time varied from 51 to 72 minutes. The mean contrast amount used was 56 mL; mean fluoroscopy time was 21 minutes; mean radiation dose was 91 mGy. At 1-month follow-up, duplex ultrasonography showed that all pedal arteries had remained patent. Transpedal artery approach as a primary approach to SFA stenting appears feasible and safe. Comparative trials with standard percutaneous femoral approach are warranted.

  8. Food Management, Production, and Service. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Food Management, Production, and Service Occupational Competency Analysis Profile (OCAP) is one of a series of competency lists, verified by expert workers, that have evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives from throughout Ohio. This…

  9. 20. COMPLETION OF INTAKE CONDUITS, PLANS, PROFILES, AND DETAILS, SHEET ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. COMPLETION OF INTAKE CONDUITS, PLANS, PROFILES, AND DETAILS, SHEET 115 OF 117, 1922. - Sacramento River Water Treatment Plant Intake Pier & Access Bridge, Spanning Sacramento River approximately 175 feet west of eastern levee on river; roughly .5 mile downstream from confluence of Sacramento & American Rivers, Sacramento, Sacramento County, CA

  10. Investigating Methods for Serving Visualizations of Vertical Profiles

    NASA Astrophysics Data System (ADS)

    Roberts, J. T.; Cechini, M. F.; Lanjewar, K.; Rodriguez, J.; Boller, R. A.; Baynes, K.

    2017-12-01

    Several geospatial web servers, web service standards, and mapping clients exist for the visualization of two-dimensional raster and vector-based Earth science data products. However, data products with a vertical component (i.e., vertical profiles) do not have the same mature set of technologies and pose a greater technical challenge when it comes to visualizations. There are a variety of tools and proposed standards, but no obvious solution that can handle the variety of visualizations found with vertical profiles. An effort is being led by members of the NASA Global Imagery Browse Services (GIBS) team to gather a list of technologies relevant to existing vertical profile data products and user stories. The goal is to find a subset of technologies, standards, and tools that can be used to build publicly accessible web services that can handle the greatest number of use cases for the widest audience possible. This presentation will describe results of the investigation and offer directions for moving forward with building a system that is capable of effectively and efficiently serving visualizations of vertical profiles.

  11. [Asymmetry in international relations, industrial property rights and anti-HIV medication].

    PubMed

    Costa-Couto, Maria Helena; Nascimento, Alvaro César

    2008-01-01

    This paper analyzes the asymmetry in the international relations as refers to the recognition of industrial property rights in the pharmaceutical industry. It focuses on the impact of such relations upon the access to ARV medication, an issue of worldwide interest due to its connection with the development of the nations. Clashing interests and the position taken by some countries in their patent laws point to a scenario less favorable for the access of peripheral countries to anti-HIV/AIDS medication. On the other hand, it seems that the success of the Brazilian STD/AIDS program in negotiating ARV prices will open new possibilities. The solution may be the internal strengthening of the National States and the active role played by the Agencies of the United Nations System in defense of the collective human interests.

  12. Corporate Mergers in the Publishing Industry: Helpful or Intrusive?

    ERIC Educational Resources Information Center

    Rudman, Herbert C.

    1990-01-01

    Examines the effects of corporate mergers in the publishing industry on the publishing of textbooks and standardized tests. Concludes that restructuring, acquisitions, and mergers have an intrusive effect on established practices of academic publishing and may severely limit the access of scholars to the academic marketplace. (FMW)

  13. Responding to a Strong Economy. Alberta Apprenticeship and Industry Training Board 2001-2002 Annual Report.

    ERIC Educational Resources Information Center

    Alberta Learning, Edmonton. Apprenticeship and Industry Training.

    In 2001-2002, the Alberta Apprenticeship and Industry Training Board continued its collaboration with industry, government, and educators to maintain high standards of training and improve access to technical training. The board continued to strengthen the network of local and provincial apprenticeship committees, occupational committees, and…

  14. Measurements of Raman crystallinity profiles in thin-film microcrystalline silicon solar cells

    NASA Astrophysics Data System (ADS)

    Choong, G.; Vallat-Sauvain, E.; Multone, X.; Fesquet, L.; Kroll, U.; Meier, J.

    2013-06-01

    Wedge-polished thin film microcrystalline silicon solar cells are prepared and used for micro-Raman measurements. Thereby, the variations of the Raman crystallinity with depth are accessed easily. Depth resolution limits of the measurement set-up are established and calculations evidencing the role of optical limits are presented. Due to this new technique, Raman crystallinity profiles of two microcrystalline silicon cells give first hints for the optimization of the profile leading to improved electrical performance of such devices.

  15. Metabolic engineering is key to a sustainable chemical industry.

    PubMed

    Murphy, Annabel C

    2011-08-01

    The depletion of fossil fuel stocks will prohibit their use as the main feedstock of future industrial processes. Biocatalysis is being increasingly used to reduce fossil fuel reliance and to improve the sustainability, efficiency and cost of chemical production. Even with their current small market share, biocatalyzed processes already generate approximately US$50 billion and it has been estimated that they could be used to produce up to 20% of fine chemicals by 2020. Until the advent of molecular biological technologies, the compounds that were readily accessible from renewable biomass were restricted to naturally-occurring metabolites. However, metabolic engineering has considerably broadened the range of compounds now accessible, providing access to compounds that cannot be otherwise reliably sourced, as well as replacing established chemical processes. This review presents the case for continued efforts to promote the adoption of biocatalyzed processes, highlighting successful examples of industrial chemical production from biomass and/or via biocatalyzed processes. A selection of emerging technologies that may further extend the potential and sustainability of biocatalysis are also presented. As the field matures, metabolic engineering will be increasingly crucial in maintaining our quality of life into a future where our current resources and feedstocks cannot be relied upon.

  16. Compliance with youth access regulations for indoor UV tanning.

    PubMed

    Hester, Eric J; Heilig, Lauren F; D'Ambrosia, Renee; Drake, Amanda L; Schilling, Lisa M; Dellavalle, Robert P

    2005-08-01

    To describe youth access to indoor UV tanning and youth discount pricing incentives in 4 states with different age restrictions: Colorado (no age restrictions), Texas (age 13 years), Illinois (age 14 years), and Wisconsin (age 16 years). Cross-sectional telephone survey conducted in October 2003 using a standardized script to assess the practices of randomly selected UV tanning operators. Randomly selected licensed indoor UV tanning facility operators in Colorado, Texas, Illinois, and Wisconsin. Number of facilities (1) complying with indoor UV tanning minimum age regulations for a 12-year-old potential patron and a 15-year-old potential patron and (2) offering youth discounts. For a 12-year-old potential patron, 62% of facilities in states with minimum age restrictions prohibiting 12-year-olds had an operator report that they would not permit indoor tanning (Texas, 23%; Illinois, 74%; and Wisconsin, 89%) compared with 18% in Colorado, a state without youth access regulations. For a 15-year-old patron, most facilities in Wisconsin, the only state with a minimum age restriction for 15-year-olds, prohibited access (77%). Overall, 15% of operators offered youth discounts: Texas, 23%; Illinois, 14%; Wisconsin, 11%; and Colorado, 11%. Tanning facilities in 4 states offered price incentives directed at youths. State youth access regulations were associated with decreased youth access to indoor tanning. High compliance levels in states with long-standing youth access regulations (Illinois and Wisconsin) demonstrate the potential for successful tanning industry youth access regulation.

  17. Clothing and Interiors, Production and Services. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for occupations in clothing, fashion merchandising, and interior design. The list contains units (with and without…

  18. Heating, Ventilation, Air-conditioning, and Refrigeration. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for heating, ventilation, air conditioning, and refrigeration occupations. The list contains units (with and without…

  19. Heating, Ventilation, Air-Conditioning, and Refrigeration. Occupational Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

  20. World Ocean Database and the Global Temperature and Salinity Profile Program Database: Synthesis of historical and near real-time ocean profile data

    NASA Astrophysics Data System (ADS)

    Boyer, T.; Sun, L.; Locarnini, R. A.; Mishonov, A. V.; Hall, N.; Ouellet, M.

    2016-02-01

    The World Ocean Database (WOD) contains systematically quality controlled historical and recent ocean profile data (temperature, salinity, oxygen, nutrients, carbon cycle variables, biological variables) ranging from Captain Cooks second voyage (1773) to this year's Argo floats. The US National Centers for Environmental Information (NCEI) also hosts the Global Temperature and Salinity Profile Program (GTSPP) Continuously Managed Database (CMD) which provides quality controlled near-real time ocean profile data and higher level quality controlled temperature and salinity profiles from 1990 to present. Both databases are used extensively for ocean and climate studies. Synchronization of these two databases will allow easier access and use of comprehensive regional and global ocean profile data sets for ocean and climate studies. Synchronizing consists of two distinct phases: 1) a retrospective comparison of data in WOD and GTSPP to ensure that the most comprehensive and highest quality data set is available to researchers without the need to individually combine and contrast the two datasets and 2) web services to allow the constantly accruing near-real time data in the GTSPP CMD and the continuous addition and quality control of historical data in WOD to be made available to researchers together, seamlessly.

  1. Closing the door on pharma? A national survey of family medicine residencies regarding industry interactions.

    PubMed

    Fugh-Berman, Adriane; Brown, Steven R; Trippett, Rachel; Bell, Alicia M; Clark, Paige; Fleg, Anthony; Siwek, Jay

    2011-05-01

    To assess the extent and type of interactions U.S. family medicine residencies permit industry to have with medical students and residents. In 2008, the authors e-mailed a four-question survey to residency directors or coordinators at all 460 accredited U.S. family medicine residencies concerning the types of industry support and interaction permitted. The authors conducted quantitative and qualitative analyses of survey responses and written comments. Residencies that did not permit any industry food, gifts, samples, or support of residency activities were designated "pharma-free." The survey response rate was 62.2% (286/460). Among responding family medicine residencies, 52.1% refused drug samples, 48.6% disallowed industry gifts or food, 68.5% forbade industry-sponsored residency activities, and 44.1% denied industry access to students and residents at the family medicine center. Seventy-five residencies (26.2%) were designated as "pharma-free." Medical-school-based and medical-school-administered residencies were no more likely than community-based residencies to be pharma-free. Among the 211 programs that permitted interaction, 68.7% allowed gifts or food, 61.1% accepted drug samples, 71.1% allowed industry representatives access to trainees in the family medicine center, and 37.9% allowed industry-sponsored residency activities. Respondents commented on challenges inherent to limiting industry interactions. Many programs noted recent changes in plans or practices. Most family medicine residencies limit industry interaction with trainees. Because industry interactions can have adverse effects on rational prescribing, residency programs should assess the benefits and harms of these relationships. Copyright © by the Association of American medical Colleges.

  2. Investigation of sensory profiles and hedonic drivers of emerging aquaculture fish species.

    PubMed

    Alexi, Niki; Byrne, Derek V; Nanou, Evangelia; Grigorakis, Kriton

    2018-02-01

    The aquaculture sector needs to increase the diversity fish species and their processed products to cover rising consumer demands. Candidates for this diversification have been identified to be meagre, greater amberjack, pikeperch and wreckfish. Yet scientific knowledge on their sensory profiles and consumer hedonic responses is scarce. The aim of the current study was to investigate these aspects, since they are essential for product development and market targeting. Species exhibited different sensory profiles with the exception of the odor/flavor profiles of meagre and greater amberjack, which were similar. Texture was more important than odor/flavor in explaining interspecies differences. Yet the hedonic responses were equally related to texture and odor/flavor. None of the species received negative hedonic scores. Both positive and negative hedonic drivers were identified within the odor/flavor and texture modalities. The distinct profiles of meagre, greater amberjack, pikeperch and wreckfish make these fish species valuable first materials for new product development and for covering markets with different sensory preferences. Differences in fish texture are more easily perceivable, yet small variations in fish odor/flavor can have a great impact on consumers' hedonic responses. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  3. MMPI-2 Profiles in Civilian PTSD: An Examination of Differential Responses between Victims of Crime and Industrial Accidents

    ERIC Educational Resources Information Center

    Shercliffe, Regan Jeffery; Colotla, Victor

    2009-01-01

    The authors studied MMPI-2 profiles of workers (N = 83) diagnosed with posttraumatic stress disorder (PTSD) and a control group comprising workers with chronic pain (N = 40). Significant differences were seen in profiles between the PTSD groups and the control group, and the authors compared the PTSD profiles according to exposure to two different…

  4. Access and use of the GUDMAP database of genitourinary development.

    PubMed

    Davies, Jamie A; Little, Melissa H; Aronow, Bruce; Armstrong, Jane; Brennan, Jane; Lloyd-MacGilp, Sue; Armit, Chris; Harding, Simon; Piu, Xinjun; Roochun, Yogmatee; Haggarty, Bernard; Houghton, Derek; Davidson, Duncan; Baldock, Richard

    2012-01-01

    The Genitourinary Development Molecular Atlas Project (GUDMAP) aims to document gene expression across time and space in the developing urogenital system of the mouse, and to provide access to a variety of relevant practical and educational resources. Data come from microarray gene expression profiling (from laser-dissected and FACS-sorted samples) and in situ hybridization at both low (whole-mount) and high (section) resolutions. Data are annotated to a published, high-resolution anatomical ontology and can be accessed using a variety of search interfaces. Here, we explain how to run typical queries on the database, by gene or anatomical location, how to view data, how to perform complex queries, and how to submit data.

  5. Reading Profiles in Multi-Site Data With Missingness.

    PubMed

    Eckert, Mark A; Vaden, Kenneth I; Gebregziabher, Mulugeta

    2018-01-01

    Children with reading disability exhibit varied deficits in reading and cognitive abilities that contribute to their reading comprehension problems. Some children exhibit primary deficits in phonological processing, while others can exhibit deficits in oral language and executive functions that affect comprehension. This behavioral heterogeneity is problematic when missing data prevent the characterization of different reading profiles, which often occurs in retrospective data sharing initiatives without coordinated data collection. Here we show that reading profiles can be reliably identified based on Random Forest classification of incomplete behavioral datasets, after the missForest method is used to multiply impute missing values. Results from simulation analyses showed that reading profiles could be accurately classified across degrees of missingness (e.g., ∼5% classification error for 30% missingness across the sample). The application of missForest to a real multi-site dataset with missingness ( n = 924) showed that reading disability profiles significantly and consistently differed in reading and cognitive abilities for cases with and without missing data. The results of validation analyses indicated that the reading profiles (cases with and without missing data) exhibited significant differences for an independent set of behavioral variables that were not used to classify reading profiles. Together, the results show how multiple imputation can be applied to the classification of cases with missing data and can increase the integrity of results from multi-site open access datasets.

  6. Line profile variation in delta-Orionis A, l-Orionis A, and 15 Monocerotis

    NASA Technical Reports Server (NTRS)

    Grady, C. A.; Snow, T. P.; Cash, W. C.

    1984-01-01

    The results of a monitoring program with IUE and Einstein are presented for three stars, delta-Ori A, l-Ori A, and 15 Mon. Line profile variability is observed in the UV profiles accessible to IUE and the relation between the variation in the different ions suggests that the ionization level is varying in the winds of these stars. This is consistent with Einstein observations of soft X-ray variability for two of the stars.

  7. Academia–Industry Symbiosis in Organic Chemistry

    PubMed Central

    2015-01-01

    Conspectus Collaboration between academia and industry is a growing phenomenon within the chemistry community. These sectors have long held strong ties since academia traditionally trains the future scientists of the corporate world, but the recent drastic decrease of public funding is motivating the academic world to seek more private grants. This concept of industrial “sponsoring” is not new, and in the past, some companies granted substantial amounts of money per annum to various academic institutions in exchange for prime access to all their scientific discoveries and inventions. However, academic and industrial interests were not always aligned, and therefore the investment has become increasingly difficult to justify from industry’s point of view. With fluctuating macroeconomic factors, this type of unrestricted grant has become more rare and has been largely replaced by smaller and more focused partnerships. In our view, forging a partnership with industry can be a golden opportunity for both parties and can represent a true symbiosis. This type of project-specific collaboration is engendered by industry’s desire to access very specific academic expertise that is required for the development of new technologies at the forefront of science. Since financial pressures do not allow companies to spend the time to acquire this expertise and even less to explore fundamental research, partnering with an academic laboratory whose research is related to the problem gives them a viable alternative. From an academic standpoint, it represents the perfect occasion to apply “pure science” research concepts to solve problems that benefit humanity. Moreover, it offers a unique opportunity for students to face challenges from the “real world” at an early stage of their career. Although not every problem in industry can be solved by research developments in academia, we argue that there is significant scientific overlap between these two seemingly disparate

  8. Phytate/calcium molar ratio does not predict accessibility of calcium in ready-to-eat dishes.

    PubMed

    Erba, Daniela; Manini, Federica; Meroni, Erika; Casiraghi, Maria C

    2017-08-01

    Phytic acid (PA), a naturally occurring compound of plant food, is generally considered to affect mineral bioavailability. The aim of this study was to investigate the reliability of the PA/calcium molar ratio as a predictive factor of calcium accessibility in composed dishes and their ingredients. Dishes were chosen whose ingredients were rich in Ca (milk or cheese) or in PA (whole-wheat cereals) in order to consider a range of PA/Ca ratios (from 0 to 2.4) and measure Ca solubility using an in vitro approach. The amounts of soluble Ca in composed dishes were consistent with the sum of soluble Ca from ingredients (three out of five meals) or higher. Among whole-wheat products, bread showed higher Ca accessibility (71%, PA/Ca = 1.1) than biscuits (23%, PA/Ca = 0.9) and pasta (15%, PA/Ca = 1.5), and among Ca-rich ingredients, semi-skimmed milk displayed higher Ca accessibility (64%) than sliced cheese (50%) and Parmesan (38%). No significant correlation between the PA/Ca ratio and Ca accessibility was found (P = 0.077). The reliability of the PA/Ca ratio for predicting the availability of calcium in composed dishes is unsatisfactory; data emphasized the importance of the overall food matrix influence on mineral accessibility. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  9. Nurses' tending instinct as a conduit for men's access to mental health counseling.

    PubMed

    Smith, Jeffrey M; Robertson, Steve

    2006-06-01

    No article has been found melding the phenomenon of nurses' tending instinct and men's mental health counseling access. This theoretical article presents nurses' tending instinct as a viable rationale to support men in utilizing mental health counseling services. Nurses can be the conduit that assists men in accessing mental health counseling when the need arises. An amalgamation of related topics, including nurses' tending instinct, men's illness/injury/disease profile, psychological medicine, and counselor skills, were forged together to unify this innovative theoretical consideration. Implications for nursing practice also were explored.

  10. Agricultural Products Sales and Service Worker. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for agricultural products sales and service occupations. The list contains units (with and without subunits), competencies,…

  11. Web Accessibility and Accessibility Instruction

    ERIC Educational Resources Information Center

    Green, Ravonne A.; Huprich, Julia

    2009-01-01

    Section 508 of the Americans with Disabilities Act (ADA) mandates that programs and services be accessible to people with disabilities. While schools of library and information science (SLIS*) and university libraries should model accessible Web sites, this may not be the case. This article examines previous studies about the Web accessibility of…

  12. Emission characteristics and chemical components of size-segregated particulate matter in iron and steel industry

    NASA Astrophysics Data System (ADS)

    Jia, Jia; Cheng, Shuiyuan; Yao, Sen; Xu, Tiebing; Zhang, Tingting; Ma, Yuetao; Wang, Hongliang; Duan, Wenjiao

    2018-06-01

    As one of the highest energy consumption and pollution industries, the iron and steel industry is regarded as a most important source of particulate matter emission. In this study, chemical components of size-segregated particulate matters (PM) emitted from different manufacturing units in iron and steel industry were sampled by a comprehensive sampling system. Results showed that the average particle mass concentration was highest in sintering process, followed by puddling, steelmaking and then rolling processes. PM samples were divided into eight size fractions for testing the chemical components, SO42- and NH4+ distributed more into fine particles while most of the Ca2+ was concentrated in coarse particles, the size distribution of mineral elements depended on the raw materials applied. Moreover, local database with PM chemical source profiles of iron and steel industry were built and applied in CMAQ modeling for simulating SO42- and NO3- concentration, results showed that the accuracy of model simulation improved with local chemical source profiles compared to the SPECIATE database. The results gained from this study are expected to be helpful to understand the components of PM in iron and steel industry and contribute to the source apportionment researches.

  13. Accessibility, Textbooks, and Access Services

    ERIC Educational Resources Information Center

    Kahler, Janice E.

    2017-01-01

    Putting access in Access Services is the goal. The Course Reserves unit is the place. Textbooks are the focus. Electronic technologies are the future. Patron-centric services will be our standard. Access to textbooks by all patrons will be the achievement. Course Reserves located in Library West at the University of Florida George A. Smathers…

  14. Local and profile soil water content monitoring: A comparison of methods in terms of apparent and actual spatial variation

    USDA-ARS?s Scientific Manuscript database

    Although many soil water sensors are now available, questions about their accuracy, precision, and representativeness still abound. This study examined down-hole (access tube profiling type) and insertion or burial (local) type sensors for their ability to assess soil profile water content (depth of...

  15. Finance issue brief: direct access: year end report-2002.

    PubMed

    Morgan, Rachel; MacEachern, Lillian

    2002-12-31

    Consumer demand for a less restrictive referral system has urged legislators, as well as the managed care industry and those in the medical field, to seek the best solution to the problem. The point of service (POS) plan was an early attempt by managed care plans to provide more freedom for enrollees. But POS plans are not always available or cost effective. Several of the larger managed care organizations, in an effort to improve enrollee and provider satisfaction, have eliminated or streamlined their referral processes. The American Medical Association has recommended that primary care and other medical specialty organizations collaborate in developing guidelines for specialty referrals, urging health plans to allow direct access in network without financial penalty as long as the access conforms with the established guidelines. In the meantime, legislators have responded to constituents by enacting measures that mandate direct access for specific types of care or standing referrals for ongoing treatment.

  16. Finance issue brief: direct access: year end report-2003.

    PubMed

    MacEachern, Lillian

    2003-12-31

    Consumer demand for a less restrictive referral system has urged legislators, as well as the managed care industry and those in the medical field, to seek the best solution to the problem. The point of service (POS) plan was an early attempt by managed care plans to provide more freedom for enrollees. But POS plans are not always available or cost effective. Several of the larger managed care organizations, in an effort to improve enrollee and provider satisfaction, have eliminated or streamlined their referral processes. The American Medical Association has recommended that primary care and other medical specialty organizations collaborate in developing guidelines for specialty referrals, urging health plans to allow direct access in network without financial penalty as long as the access conforms with the established guidelines. In the meantime, legislators have responded to constituents by enacting measures that mandate direct access for specific types of care or standing referrals for ongoing treatment.

  17. Professional Development Needs as Perceived by Minnesota Industrial Arts/Technology Teachers.

    ERIC Educational Resources Information Center

    Johnson, Scott D.; Summers, Keith

    1984-01-01

    Describes a profile of professional development needs that was developed through a survey of 150 industrial arts/technology teachers in Minnesota. The greatest need was in the area of job environment: salary, job security, facilities and equipment, and discipline. (SK)

  18. The Distribution of Information: The Role for Online Public Access Catalogs.

    ERIC Educational Resources Information Center

    Matthews, Joseph R.

    1994-01-01

    Describes the Online Public Access Catalog (OPAC) and the inclusion of abstracting and indexing industry databases in OPACs. Topics addressed include the implications of including abstracting and indexing tape and CD-ROM products in OPACs; the need for standards allowing library systems to communicate with dissimilar CD-ROM products; and computer,…

  19. Social networking profile correlates of schizotypy.

    PubMed

    Martin, Elizabeth A; Bailey, Drew H; Cicero, David C; Kerns, John G

    2012-12-30

    Social networking sites, such as Facebook, are extremely popular and have become a primary method for socialization and communication. Despite a report of increased use among those on the schizophrenia-spectrum, few details are known about their actual practices. In the current research, undergraduate participants completed measures of schizotypy and personality, and provided access to their Facebook profiles. Information from the profiles were then systematically coded and compared to the questionnaire data. As predicted, social anhedonia (SocAnh) was associated with a decrease in social participation variables, including a decrease in number of friends and number of photos, and an increase in length of time since communication with a friend, but SocAnh was also associated with an increase in profile length. Also, SocAnh was highly correlated with extraversion. Relatedly, extraversion uniquely predicted the number of friends and photos and length of time since communication with a friend. In addition, perceptual aberration/magical ideation (PerMag) was associated with an increased number of "black outs" on Facebook profile print-outs, a measure of paranoia. Overall, results from this naturalistic-like study show that SocAnh and extraversion are associated with decreased social participation and PerMag with increased paranoia related to information on social networking sites. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  20. Industrial applications study. Volume V. Bibliography of relevant literature. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brown, Harry L.; Hamel, Bernard B.; Karamchetty, Som

    1976-12-01

    This five-volume report represents an initial Phase O evaluation of waste heat recovery and utilization potential in the manufacturing portion of the industrial sector. The scope of this initial phase was limited to the two-digit SIC level and addressed the feasibility of obtaining in-depth energy information in the industrial sector. Within this phase, a successful methodology and approaches for data gathering and assessment are established. Using these approaches, energy use and waste heat profiles were developed at the 2-digit level; with this data, waste heat utilization technologies were evaluated. The first section of the bibliography lists extensive citations for allmore » industries. The next section is composed of an extensive literature search with abstracts for industrial energy conservation. EPA publications on specific industries and general references conclude the publication. (MCW)« less

  1. Multistage WDM access architecture employing cascaded AWGs

    NASA Astrophysics Data System (ADS)

    El-Nahal, F. I.; Mears, R. J.

    2009-03-01

    Here we propose passive/active arrayed waveguide gratings (AWGs) with enhanced performance for system applications mainly in novel access architectures employing cascaded AWG technology. Two technologies were considered to achieve space wavelength switching in these networks. Firstly, a passive AWG with semiconductor optical amplifiers array, and secondly, an active AWG. Active AWG is an AWG with an array of phase modulators on its arrayed-waveguides section, where a programmable linear phase-profile or a phase hologram is applied across the arrayed-waveguide section. This results in a wavelength shift at the output section of the AWG. These architectures can address up to 6912 customers employing only 24 wavelengths, coarsely separated by 1.6 nm. Simulation results obtained here demonstrate that cascaded AWGs access architectures have a great potential in future local area networks. Furthermore, they indicate for the first time that active AWGs architectures are more efficient in routing signals to the destination optical network units than passive AWG architectures.

  2. Progress in modification of sunflower oil to expand its industrial value.

    PubMed

    Rauf, Saeed; Jamil, Nazia; Tariq, Sultan Ali; Khan, Maria; Kausar, Maria; Kaya, Yalcin

    2017-05-01

    Increasing the sunflower seed oil content as well as improving its quality makes it compatible for industrial demands. This is an important breeding objective of sunflower which increases its market value and ensures high returns for the producers. The present review focuses on determining the progress of improving sunflower seed oil content and modifying its quality by empirical and advanced molecular breeding methods. It is known that the sunflower oil content and quality have been altered through empirical selection methods and mutation breeding programmes in various parts of the world. Further improvement in seed oil content and its components (such as phytosterols, tocopherols and modified fatty acid profile) has been slowed down due to low genetic variation in elite germplasm and complex of hereditary traits. Introgression from wild species can be carried out to modify the fatty acids profile and tocopherol contents with linkage drags. Different transgenes introduced through biotechnological methods may produce novel long-chain fatty acids within sunflower oil. Bio-engineering of sunflower oil could allow it to be used in diverse industrial products such as bio-diesel or bio-plastics. These results showed that past and current trends of modifying sunflower oil quality are essential for its further expansion as an oilseed crop. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  3. Field Heat Treatment Technician: Competency Profile. Apprenticeship and Industry Training. 20908.1

    ERIC Educational Resources Information Center

    Alberta Advanced Education and Technology, 2008

    2008-01-01

    The graduate of the Field Heat Treatment Technician apprenticeship program is a certified journeyperson who will be able: (1) use heat treatment equipment to apply heat to materials in order to change a material's properties; (2) Use their knowledge of the properties of heat, industry codes and specifications to determine how heat treatment will…

  4. An analysis of current pharmaceutical industry practices for making clinical trial results publicly accessible.

    PubMed

    Viereck, Christopher; Boudes, Pol

    2009-07-01

    We compared the clinical trial transparency practices of US/European pharma by analyzing the publicly-accessible clinical trial results databases of major drugs (doripenem, varenicline, lapatinib, zoledronic acid, adalimumab, insulin glargine, raltegravir, gefitinib). We evaluated their accessibility and utility from the perspective of the lay public. We included databases on company websites, http://www.clinicalstudyresults.org, http://www.clinicaltrials.gov and http://clinicaltrials.ifpma.org. Only 2 of 8 company homepages provide a direct link to the results. While the use of common terms on company search engines led to results for 5 of the 8 drugs following 2-4 clicks, no logical pathway was identified. The number of clinical trials in the databases was inconsistent: 0 for doripenem to 45 for insulin glargine. Results from all phases of clinical development were provided for 2 (insulin glargine and gefitinib) of the 8 drugs. Analyses of phase III reports revealed that most critical elements of the International Conference of Harmonization E3 Structure and Content of Synopses for Clinical Trial Reports were provided for 2 (varenicline, lapatinib) of the 8 drugs. For adalimumab and zoledronic acid, only citations were provided, which the lay public would be unable to access. None of the clinical trial reports was written in lay language. User-friendly support, when provided, was of marginal benefit. Only 1 of the databases (gefitinib) permitted the user to find the most recently updated reports. None of the glossaries included explanations for adverse events or statistical methodology. In conclusion, our study indicates that the public faces significant hurdles in finding and understanding clinical trial results databases.

  5. Nutritional and anti-nutritional potential of three accessions of itching bean (Mucuna pruriens (L.) DC var. pruriens): an under-utilized tribal pulse.

    PubMed

    Kala, Balasubiramanian Kamatchi; Mohan, Veerabahu Ramasamy

    2010-08-01

    Three accessions of the under-utilized legume itching bean (Mucuna pruriens var. pruriens) were analysed for proximate composition, mineral profiles, vitamins (niacin and ascorbic acid), fatty acid profiles, amino acid profiles of total seed protein, in vitro protein digestibility and certain anti-nutritional factors. All three accessions of M. pruriens var. pruriens contained higher amounts of crude protein and crude lipid when compared with most of the commonly consumed pulses. The fatty acid profiles revealed that the seed lipids contained a higher concentration of palmitic acid and linoleic acids. Amino acid profiles of M. pruriens var. pruriens revealed that the seed protein contained relatively higher levels of certain essential amino acids compared with the FAO/WHO requirement pattern. The investigated seeds are rich in minerals such as potassium, calcium, magnesium, phosphorus, iron and manganese. Anti nutritional substances such as total free phenolics, tannins, 3,4-dihydroxyphenylalanine, phytic acid, hydrogen cyanide, trypsin inhibitor activity, oligosaccharides and phytohaemagglutinating activity were investigated. The anti-nutritional fatty acid, behenic acid, also was detected in the present study.

  6. Policy reconciliation for access control in dynamic cross-enterprise collaborations

    NASA Astrophysics Data System (ADS)

    Preuveneers, D.; Joosen, W.; Ilie-Zudor, E.

    2018-03-01

    In dynamic cross-enterprise collaborations, different enterprises form a - possibly temporary - business relationship. To integrate their business processes, enterprises may need to grant each other limited access to their information systems. Authentication and authorization are key to secure information handling. However, access control policies often rely on non-standardized attributes to describe the roles and permissions of their employees which convolutes cross-organizational authorization when business relationships evolve quickly. Our framework addresses the managerial overhead of continuous updates to access control policies for enterprise information systems to accommodate disparate attribute usage. By inferring attribute relationships, our framework facilitates attribute and policy reconciliation, and automatically aligns dynamic entitlements during the evaluation of authorization decisions. We validate our framework with a Industry 4.0 motivating scenario on networked production where such dynamic cross-enterprise collaborations are quintessential. The evaluation reveals the capabilities and performance of our framework, and illustrates the feasibility of liberating the security administrator from manually provisioning and aligning attributes, and verifying the consistency of access control policies for cross-enterprise collaborations.

  7. Curbing Air Pollution and Greenhouse Gas Emissions from Industrial Boilers in China

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shen, Bo; Price, Lynn K; Lu, Hongyou

    China’s industrial boiler systems consume 700 million tons of coal annually, accounting for 18% of the nation’s total coal consumption. Together these boiler systems are one of the major sources of China’s greenhouse gas (GHG) emissions, producing approximately 1.3 gigatons (Gt) of carbon dioxide (CO 2) annually. These boiler systems are also responsible for 33% and 27% of total soot and sulfur dioxide (SO2) emissions in China, respectively, making a substantial contribution to China’s local environmental degradation. The Chinese government - at both the national and local level - is taking actions to mitigate the significant greenhouse gas (GHG) emissionsmore » and air pollution related to the country’s extensive use of coal-fired industrial boilers. The United States and China are pursuing a collaborative effort under the U.S.-China Climate Change Working Group to conduct a comprehensive assessment of China’s coal-fired industrial boilers and to develop an implementation roadmap that will improve industrial boiler efficiency and maximize fuel-switching opportunities. Two Chinese cities – Ningbo and Xi’an – have been selected for the assessment. These cities represent coastal areas with access to liquefied natural gas (LNG) imports and inland regions with access to interprovincial natural gas pipelines, respectively.« less

  8. Excellence in education and training advances competitiveness of the pharmaceutical industry in Europe.

    PubMed

    Bjerrum, Ole J

    2011-09-18

    This commentatory should be read in connection with the subsequent article about current trends in the evolvement of the pharmaceutical industries. It points to importance for the industries to have access to pharmaceutical sciences researchers educated and trained at the highest level through the newly established public-private system of courses in Europe supported by EU. Copyright © 2011 Elsevier B.V. All rights reserved.

  9. Custom E-Learning Experiences: Working with Profiles for Multiple Content Sources Access and Adaptation

    ERIC Educational Resources Information Center

    Ferretti, Stefano; Roccetti, Marco; Salomoni, Paola; Mirri, Silvia

    2009-01-01

    It is a common belief that the problem of extracting learners' profiles to be used for delivering custom learning experiences is a closed case. Yet, practical solutions do not completely cope with the complex issue of capturing all the features of users, especially those of heterogeneous learners, who may have special needs or characteristics…

  10. Privacy and Access Control for IHE-Based Systems

    NASA Astrophysics Data System (ADS)

    Katt, Basel; Breu, Ruth; Hafner, Micahel; Schabetsberger, Thomas; Mair, Richard; Wozak, Florian

    Electronic Health Record (EHR) is the heart element of any e-health system, which aims at improving the quality and efficiency of healthcare through the use of information and communication technologies. The sensitivity of the data contained in the health record poses a great challenge to security. In this paper we propose a security architecture for EHR systems that are conform with IHE profiles. In this architecture we are tackling the problems of access control and privacy. Furthermore, a prototypical implementation of the proposed model is presented.

  11. Gold or green: the debate on open access policies.

    PubMed

    Abadal, Ernest

    2013-09-01

    The movement for open access to science seeks to achieve unrestricted and free access to academic publications on the Internet. To this end, two mechanisms have been established: the gold road, in which scientific journals are openly accessible, and the green road, in which publications are self-archived in repositories. The publication of the Finch Report in 2012, advocating exclusively the adoption of the gold road, generated a debate as to whether either of the two options should be prioritized. The recommendations of the Finch Report stirred controversy among academicians specialized in open access issues, who felt that the role played by repositories was not adequately considered and because the green road places the burden of publishing costs basically on authors. The Finch Report's conclusions are compatible with the characteristics of science communication in the UK and they could surely also be applied to the (few) countries with a powerful publishing industry and substantial research funding. In Spain, both the current national legislation and the existing rules at universities largely advocate the green road. This is directly related to the structure of scientific communication in Spain, where many journals have little commercial significance, the system of charging a fee to authors has not been adopted, and there is a good repository infrastructure. As for open access policies, the performance of the scientific communication system in each country should be carefully analyzed to determine the most suitable open access strategy.

  12. A speculative look at the future of the American Petroleum Industry based on a full-cycle analysis of the American Whale Oil Industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Coleman, J.L. Jr.

    1995-09-01

    A full-cycle, industry-scale look at the American whaling industry of the 19th century suggests a number of comparisons with the American petroleum industry of the 20th century. Using the King Hubbert production profile for extraction industries as a guide, both industries show a similar business life span. An understanding of the history of American whaling will, perhaps, gives us a more complete understanding of the history of the American petroleum industry. The rise of the American whaling industry to the premier investment opportunity of its day is little known to most in today`s oil and gas industry. Yet, we allmore » know that abundant and inexpensive crude oil was a key factor in its demise. From a careful study of the history of the American whaling industry a set of factors (or stages of transition), common to similar extraction industries, can be developed, which may help investors and workers determine the state of health of our industry: (1) defection of highly skilled personnel to other, comparable, technical industries; (2) discovery and initial development of a replacement commodity; (3) major calamity, which adversely affects the industry in terms of significant loss of working capital and/or resources; (4) loss of sufficient investment capital to continue resource addition; (5) rapid development of a replacement commodity with attendant decrease in per unit price to a position lower than the primary commodity; (6) significant loss of market share by the primary commodity; and (7) end of the primary commodity as a major economic force.« less

  13. A Simultaneous Density-Integral System for Estimating Stem Profile and Biomass: Slash Pine and Willow Oak

    Treesearch

    Bernard R. Parresol; Charles E. Thomas

    1996-01-01

    In the wood utilization industry, both stem profile and biomass are important quantities. The two have traditionally been estimated separately. The introduction of a density-integral method allows for coincident estimation of stem profile and biomass, based on the calculus of mass theory, and provides an alternative to weight-ratio methodology. In the initial...

  14. Phytochemicals and nutritional composition in accessions of Kei-apple (Dovyalis caffra): Southern African indigenous fruit.

    PubMed

    Mpai, Semkaleng; du Preez, Rosemary; Sultanbawa, Yasmina; Sivakumar, Dharini

    2018-07-01

    Current study was initiated to identify the phytochemicals and the nutritional profile of eleven Kei-apple fruit accessions. Accession FH29 showed the highest level (492.45 mg 100 g -1 fresh weight) of total phenolic content, higher than the referral fruit, blueberry. Pyrogallol was identified as the predominant phenolic compound in all accessions. Accession FH 29 showed the highest (49.75 µmol TEAC g -1 fresh weight) antioxidant capacity. Catechin content was higher in accessions; FH151, FH15, FH14, FH29, FH243, FH 239 and FH 231. Accessions, FH14 and FH232 exhibited higher levels of β-carotene than the referral fruit apples (cv. Top red) and peaches (cv. Excellence). The total sugar (glucose and fructose) was highest (50 mg g -1 fresh weight) in accession FH240. Asparagine (3122.18 mg L -1 ) and gamma-aminobutyric (1688.87 mg L -1 ) were higher in accessions FH239 and FH243 respectively. Overall, the accession Kei-apple FH236 can be regarded as a good source of essential amino acids. Copyright © 2018 Elsevier Ltd. All rights reserved.

  15. Simple laser vision sensor calibration for surface profiling applications

    NASA Astrophysics Data System (ADS)

    Abu-Nabah, Bassam A.; ElSoussi, Adnane O.; Al Alami, Abed ElRahman K.

    2016-09-01

    Due to the relatively large structures in the Oil and Gas industry, original equipment manufacturers (OEMs) have been implementing custom-designed laser vision sensor (LVS) surface profiling systems as part of quality control in their manufacturing processes. The rough manufacturing environment and the continuous movement and misalignment of these custom-designed tools adversely affect the accuracy of laser-based vision surface profiling applications. Accordingly, Oil and Gas businesses have been raising the demand from the OEMs to implement practical and robust LVS calibration techniques prior to running any visual inspections. This effort introduces an LVS calibration technique representing a simplified version of two known calibration techniques, which are commonly implemented to obtain a calibrated LVS system for surface profiling applications. Both calibration techniques are implemented virtually and experimentally to scan simulated and three-dimensional (3D) printed features of known profiles, respectively. Scanned data is transformed from the camera frame to points in the world coordinate system and compared with the input profiles to validate the introduced calibration technique capability against the more complex approach and preliminarily assess the measurement technique for weld profiling applications. Moreover, the sensitivity to stand-off distances is analyzed to illustrate the practicality of the presented technique.

  16. On the Intensity Profile of Electric Lamps and Light Bulbs

    ERIC Educational Resources Information Center

    Bacalla, Xavier; Salumbides, Edcel John

    2013-01-01

    We demonstrate that the time profile of the light intensity from domestic lighting sources exhibits simple yet interesting properties that foster lively student discussions. We monitor the light intensity of an industrial fluorescent lamp (also known as TL) and an incandescent bulb using a photodetector connected to an oscilloscope. The light…

  17. ADA Title I allegations and the Mining, Quarrying, and Oil/Gas Extraction industry.

    PubMed

    Van Wieren, Todd A; Rhoades, Laura; McMahon, Brian T

    2017-01-01

    The majority of research about employment discrimination in the U.S. Mining, Quarrying, and Oil/Gas (MQOGE) industries has concentrated on gender and race, while little attention has focused on disability. To explore allegations of Americans with Disabilities Act (ADA) Title I discrimination made to the Equal Employment Opportunity Commission (EEOC) by individuals with disabilities against MQOGE employers. Key data available to this study included demographic characteristics of charging parties, size of employers, types of allegations, and case outcomes. Using descriptive analysis, allegation profiles were developed for MQOGE's three main sectors (i.e., Oil/Gas Extraction, Mining except Oil/Gas, and Support Activities). These three profiles where then comparatively analyzed. Lastly, regression analysis explored whether some of the available data could partially predict MQOGE case outcomes. The predominant characteristics of MQOGE allegations were found to be quite similar to the allegation profile of U.S. private-sector industry as a whole, and fairly representative of MQOGE's workforce demographics. Significant differences between MQOGE's three main sector profiles were noted on some important characteristics. Lastly, it was found that MQOGE case outcomes could be partially predicted via some of the available variables. The study's limitations were presented and recommendations were offered for further research.

  18. Gene expression cross-profiling in genetically modified industrial Saccharomyces cerevisiae strains during high-temperature ethanol production from xylose.

    PubMed

    Ismail, Ku Syahidah Ku; Sakamoto, Takatoshi; Hatanaka, Haruyo; Hasunuma, Tomohisa; Kondo, Akihiko

    2013-01-10

    Production of ethanol from xylose at high temperature would be an economical approach since it reduces risk of contamination and allows both the saccharification and fermentation steps in SSF to be running at elevated temperature. Eight recombinant xylose-utilizing Saccharomyces cerevisiae strains developed from industrial strains were constructed and subjected to high-temperature fermentation at 38 °C. The best performing strain was sun049T, which produced up to 15.2 g/L ethanol (63% of the theoretical production), followed by sun048T and sun588T, both with 14.1 g/L ethanol produced. Via transcriptomic analysis, expression profiling of the top three best ethanol producing strains compared to a negative control strain, sun473T, led to the discovery of genes in common that were regulated in the same direction. Identification of the 20 most highly up-regulated and the 20 most highly down-regulated genes indicated that the cells regulate their central metabolism and maintain the integrity of the cell walls in response to high temperature. We also speculate that cross-protection in the cells occurs, allowing them to maintain ethanol production at higher concentration under heat stress than the negative controls. This report provides further transcriptomics information in the interest of producing a robust microorganism for high-temperature ethanol production utilizing xylose. Copyright © 2012 Elsevier B.V. All rights reserved.

  19. Health-industry linkages for local health: reframing policies for African health system strengthening

    PubMed Central

    Mackintosh, Maureen; Mugwagwa, Julius; Banda, Geoffrey; Tibandebage, Paula; Tunguhole, Jires; Wangwe, Samuel; Karimi Njeru, Mercy

    2018-01-01

    Abstract The benefits of local production of pharmaceuticals in Africa for local access to medicines and to effective treatment remain contested. There is scepticism among health systems experts internationally that production of pharmaceuticals in sub-Saharan Africa (SSA) can provide competitive prices, quality and reliability of supply. Meanwhile low-income African populations continue to suffer poor access to a broad range of medicines, despite major international funding efforts. A current wave of pharmaceutical industry investment in SSA is associated with active African government promotion of pharmaceuticals as a key sector in industrialization strategies. We present evidence from interviews in 2013–15 and 2017 in East Africa that health system actors perceive these investments in local production as an opportunity to improve access to medicines and supplies. We then identify key policies that can ensure that local health systems benefit from the investments. We argue for a ‘local health’ policy perspective, framed by concepts of proximity and positionality, which works with local priorities and distinct policy time scales and identifies scope for incentive alignment to generate mutually beneficial health–industry linkages and strengthening of both sectors. We argue that this local health perspective represents a distinctive shift in policy framing: it is not necessarily in conflict with ‘global health’ frameworks but poses a challenge to some of its underlying assumptions. PMID:29562286

  20. Social networking profiles and professionalism issues in residency applicants: an original study-cohort study.

    PubMed

    Ponce, Brent A; Determann, Jason R; Boohaker, Hikel A; Sheppard, Evan; McGwin, Gerald; Theiss, Steven

    2013-01-01

    To determine the frequency of social networking, the degree of information publicly disclosed, and whether unprofessional content was identified in applicants from the 2010 Residency Match. Medical professionalism is an essential competency for physicians to learn, and information found on social networking sites may be hazardous to the doctor-patient relationship and an institution's public perception. No study has analyzed the social network content of applicants applying for residency. Online review of social networking Facebook profiles of graduating medical students applying for a residency in orthopedic surgery. Evidence of unprofessional content was based upon Accreditation Council for Graduate Medical Education guidelines. Additional recorded applicant data included as follows: age, United States Medical Licensing Examination part I score, and residency composite score. Relationship between professionalism score and recorded data points was evaluated using an analysis of variance. Nearly half of all applicants, 46% (200/431), had a Facebook profile. The majority of profiles (85%) did not restrict online access to their profile. Unprofessional content was identified in 16% of resident applicant profiles. Variables associated with lower professionalism scores included unmarried relationship status and lower residency composite scores. It is critical for healthcare professionals to recognize both the benefits and risks present with electronic communication and to vigorously protect the content of material allowed to be publically accessed through the Internet. Copyright © 2013 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  1. Population Accessibility to Radiotherapy Services in New South Wales Region of Australia: a methodological contribution

    NASA Astrophysics Data System (ADS)

    Shukla, Nagesh; Wickramasuriya, Rohan; Miller, Andrew; Perez, Pascal

    2015-05-01

    This paper proposes an integrated modelling process to assess the population accessibility to radiotherapy treatment services in future based on future cancer incidence and road network-based accessibility. Previous research efforts assessed travel distance/time barriers affecting access to cancer treatment services, as well as epidemiological studies that showed that cancer incidence rates vary with population demography. It is established that travel distances to treatment centres and demographic profiles of the accessible regions greatly influence the demand for cancer radiotherapy (RT) services. However, an integrated service planning approach that combines spatially-explicit cancer incidence projections, and the RT services accessibility based on patient road network have never been attempted. This research work presents this novel methodology for the accessibility assessment of RT services and demonstrates its viability by modelling New South Wales (NSW) cancer incidence rates for different age-sex groups based on observed cancer incidence trends; estimating the road network-based access to current NSW treatment centres; and, projecting the demand for RT services in New South Wales, Australia from year 2011 to 2026.

  2. Industrial Section Convenor's Report

    NASA Astrophysics Data System (ADS)

    Barone, M.; Riboni, P.

    2002-11-01

    Over the years this conference has gained a solid reputation as an appropriate rostrum for illustrating new concepts in the relations between industry and the scientific world and for introducing new technologies to a large assistance of junior and more experienced scientists. In fact, from the very beginning the founders of this endeavour announced: "The conference is aimed for promoting contacts among scientists involved in particle and fundamental physics, among experimental physicists in other fields and representatives from industry." Facilities at the Conference are designed to fulfil the task: space and general facilities are offered to industry representatives to display their products. This year a more accessible and luminous space arrangement was made available to the exhibitors. At the same time two plenary sessions have been dedicated to selected speakers to illustrate new trends in Technology Transfer, analysis of environment affecting our community, examples of historical successes in the merging of science and industry. We have identified in "GRID" and in "E-Publishing" two major promising areas where our Community will play a prime role as "User" and it was of the general interest to have them illustrated by two personalities directly involved in their development. The flow of knowledge is of course more massive from "Industry" to "Science" than vice-versa, but "Science" to "Industry" move offers an intensive added value. The technology transfer concept with the "Patents" as fund raising tool proved less glorious than expected. Trademark, licensing agreement and " Patents" can assure intellectual properties. But patent is an issue to be used cautiously. Evidence exists that much more efficient transfer of "Science" knowledge to "Economy" is achieved by venture capital move and start-up companies. These two facets of the Technology Transfer business have been covered by Routti's and Bourgeois's lectures.There are two examples of Companies who moved

  3. Comparative analysis of the cold acclimation and freezing tolerance capacities of seven diploid Brachypodium distachyon accessions

    PubMed Central

    Colton-Gagnon, Katia; Ali-Benali, Mohamed Ali; Mayer, Boris F.; Dionne, Rachel; Bertrand, Annick; Do Carmo, Sonia; Charron, Jean-Benoit

    2014-01-01

    Background and Aims Cold is a major constraint for cereal cultivation under temperate climates. Winter-hardy plants interpret seasonal changes and can acquire the ability to resist sub-zero temperatures. This cold acclimation process is associated with physiological, biochemical and molecular alterations in cereals. Brachypodium distachyon is considered a powerful model system to study the response of temperate cereals to adverse environmental conditions. To date, little is known about the cold acclimation and freezing tolerance capacities of Brachypodium. The main objective of this study was to evaluate the cold hardiness of seven diploid Brachypodium accessions. Methods An integrated approach, involving monitoring of phenological indicators along with expression profiling of the major vernalization regulator VRN1 orthologue, was followed. In parallel, soluble sugars and proline contents were determined along with expression profiles of two COR genes in plants exposed to low temperatures. Finally, whole-plant freezing tests were performed to evaluate the freezing tolerance capacity of Brachypodium. Key Results Cold treatment accelerated the transition from the vegetative to the reproductive phase in all diploid Brachypodium accessions tested. In addition, low temperature exposure triggered the gradual accumulation of BradiVRN1 transcripts in all accessions tested. These accessions exhibited a clear cold acclimation response by progressively accumulating proline, sugars and COR gene transcripts. However, whole-plant freezing tests revealed that these seven diploid accessions only have a limited capacity to develop freezing tolerance when compared with winter varieties of temperate cereals such as wheat and barley. Furthermore, little difference in terms of survival was observed among the accessions tested despite their previous classification as either spring or winter genotypes. Conclusions This study is the first to characterize the freezing tolerance capacities

  4. Affairs of power: Restructuring California's electric utility industry, 1968-1998

    NASA Astrophysics Data System (ADS)

    Myers, William Allan

    This dissertation studies the process of change in the political economy of electric utilities. Following two decades of continual growth during the nation's post-World War Two economic and population boom, the electric power industry confronted increasing challenges to its traditional operating practices and cultural values, nowhere with greater intensity than in California. Pressure for change came from outside forces who opposed utilities' business practices, assailed their traditional vertically-integrated structure, questioned the political assumptions that sustained their monopoly status, and ultimately wrested away access to the once tightly controlled technology of electric generation and transmission. Because managers of both investor-owned and publicly-owned utilities continued to rely upon long-standing economic and technical assumptions derived from deeply held cultural values sustained by decades of business success, they were rendered unable to comprehend and unwilling to accommodate change. Persistent mistrust between the publicly-owned and privately-owned sectors further weakened the industry's ability to work cooperatively in the face of crucial challenges. Thus encumbered by endemic structural jealousy, technological path dependency, and organizational stasis, the industry did not respond with sufficient innovation to new social values and altering economic conditions, ultimately resulting in the discarding of the old political economy of regulated monopolism. Five precepts of economic history are identified as crucial elements of the process of change. First, the tension between protection and entry, and the related issue of access to technology, contributes to creation and modification of the political economy in which economic institutions function. Second, submission to governmental regulatory powers allows certain industries to control entry, restrict access, and protect themselves from the dynamics of competitive change. Third, an

  5. 40 CFR 60.2665 - What if all the qualified operators are temporarily not accessible?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration Units Model Rule-Operator... accessible and that you are resuming operation. Model Rule—Emission Limitations and Operating Limits ...

  6. 40 CFR 60.2665 - What if all the qualified operators are temporarily not accessible?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration Units Model Rule-Operator... accessible and that you are resuming operation. Model Rule—Emission Limitations and Operating Limits ...

  7. Quiet Sonic Booms: A NASA and Industry Progress Report

    NASA Technical Reports Server (NTRS)

    Larson, David Nils; Martin, Roy; Haering, Edward A.

    2011-01-01

    The purpose of this Oral Presentation is to present a progress report on NASA and Industry efforts related to Quiet Sonic Boom Program activities. This presentation will review changes in aircraft shaping to produce quiet supersonic booms and associated supersonic flight test methods and results. In addition, new flight test profiles have been recently developed that have allowed for the generation of sonic booms of varying intensity. These new flight test profiles have allowed for ground testing of the response of various building structures to sonic booms and the associated public acceptability to various sonic boom intensities. The new flight test profiles and associated ground measurement test methods will be reviewed. Finally, this Oral Presentation will review the International Regulatory requirements that would be involved to change aviation regulation and allow for overland quiet supersonic flight.

  8. Socioeconomic and Health Profile of Haitian Immigrants in a Brazilian Amazon State.

    PubMed

    Borges, Fabiano Tonaco; Muraro, Ana Paula; da Costa Leão, Luís Henrique; de Andrade Carvalho, Luciana; Siqueira, Carlos Eduardo Gomes

    2018-01-25

    We analyzed the sociodemographic profile, migration journey, health conditions, and health care access and utilization among recent Haitian immigrants to the Brazilian Amazon state of Mato Grosso. We conducted a cross-sectional study with a probabilistic sample of 452 Haitians. We administered a bilingual questionnaire from December 2014 to February 2015. Data were analyzed using chi square tests to evaluate differences among groups. The majority of participants were married men younger than 35 years old. They mostly came from the Haiti's Artibonite Department, living in Brazil for less than a year. Half of the participants were employed at the time of the interviews, and 81.8% relied exclusively on the Brazilian Unified Healthcare System for medical care. The overall health profile and health care access were good. Haitian migration to Brasil is a case of South-South migration driven by economic needs. Our population had good health status despite socioeconomic challenges.

  9. Two-photon equivalent weighting of spatial excimer laser beam profiles

    NASA Astrophysics Data System (ADS)

    Eva, Eric; Bauer, Harry H.; Metzger, K.; Pfeiffer, A.

    2001-04-01

    Damage in optical materials for semiconductor lithography applications caused by exposure to 248 or 193 nm light is usually two-photon driven, hence it is a nonlinear function of incident intensity. Materials should be tested with flat- topped temporal and spatial laser beam profiles to facilitate interpretation of data, but in reality this is hard to achieve. Sandstrom provided a formula that approximates any given temporal pulse shape with a two- photon equivalent rectangular pulse (Second Symposium on 193 nm Lithography, Colorado Springs 1997). Known as the integral-square pulse duration, this definition has been embraced as an industry standard. Originally faced with the problem of comparing results obtained with pseudo-Gaussian spatial profiles to literature data, we found that a general solution for arbitrarily inhomogeneous spatial beam profiles exists which results in a definition much similar to Sandstrom's. In addition, we proved the validity of our approach in experiments with intentionally altered beam profiles.

  10. Lebanon: country profile.

    PubMed

    Marfleet, P

    1988-05-01

    A brief profile of Lebanon's economy, people, health, culture and political situation is presented. Lebanon has an estimated 3.5 million people, with a Maronite Christian elite, a Muslim Shiite majority, and Muslim Sunnis and Druze groups. The infant mortality is estimated at 41/1000; literacy is 69% among women and 86% among men; life expectancy was 66 years, 10 years ago. The economy, previously thriving on banking, manufacturing and agriculture, is now decimated, and Lebanon's once active tourist industry, based on elegant facilities in Beirut and neighboring beaches and ski slopes, is the victim of 15 years of civil strife. Israel has invaded, supporting Maronite Christians, Syria has invaded in support Muslim and Druze militias, and Iran has aggressively supported Shiite factions.

  11. NASA Alternate Access to Station Service Concept

    NASA Technical Reports Server (NTRS)

    Bailey, Michelle D.; Crumbly, Chris

    2001-01-01

    The evolving nature of the NASA space enterprise compels the agency to develop new and innovative space systems concepts. NASA, working with increasingly strained budgets and a declining manpower base, is attempting to transform from operational activities to procurement of commercial services. NASA's current generation reusable launch vehicle, the Shuttle, is in transition from a government owned and operated entity to a commercial venture to reduce the civil servant necessities for that program. NASA foresees its second generation launch vehicles being designed and operated by industry for commercial and government services. The "service" concept is a pioneering effort by NASA. The purpose the "service" is not only to reduce the civil servant overhead but will free up government resources for further research - and enable industry to develop a space business case so that industry can sustain itself beyond government programs. In addition, NASA desires a decreased responsibility thereby decreasing liability. The Second Generation Reusable Launch Vehicle (RLV) program is implementing NASA's Space Launch Initiative (SLI) to enable industry to develop the launch vehicles of the future. The Alternate Access to Station (AAS) project office within this program is chartered with enabling industry to demonstrate an alternate access capability for the International Space Station (ISS). The project will not accomplish this by traditional government procurement methods, not by integrating the space system within the project office, or by providing the only source of business for the new capability. The project funds will ultimately be used to purchase a service to take re-supply cargo to the ISS, much the same as any business might purchase a service from FedEx to deliver a package to its customer. In the near term, the project will fund risk mitigation efforts for enabling technologies. AAS is in some ways a precursor to the 2nd Generation RLV. By accomplishing ISS resupply

  12. NASA Alternate Access to Station Service Concept

    NASA Astrophysics Data System (ADS)

    Bailey, M. D.; Crumbly, C.

    2002-01-01

    The evolving nature of the NASA space enterprise compels the agency to develop new and innovative space systems concepts. NASA, working with increasingly strained budgets and a declining manpower base, is attempting to transform from operational activities to procurement of commercial services. NASA's current generation reusable launch vehicle, the Shuttle, is in transition from a government owned and operated entity to a commercial venture to reduce the civil servant necessities for that program. NASA foresees its second generation launch vehicles being designed and operated by industry for commercial and government services. The "service" concept is a pioneering effort by NASA. The purpose the "service" is not only to reduce the civil servant overhead but will free up government resources for further research and enable industry to develop a space business case so that industry can sustain itself beyond government programs. In addition, NASA desires a decreased responsibility thereby decreasing liability. The Second Generation Reusable Launch Vehicle (RLV) program is implementing NASA's Space Launch Initiative (SLI) to enable industry to develop the launch vehicles of the future. The Alternate Access to Station (AAS) project office within this program is chartered with enabling industry to demonstrate an alternate access capability for the International Space Station (ISS). The project will not accomplish this by traditional government procurement methods, not by integrating the space system within the project office, or by providing the only source of business for the new capability. The project funds will ultimately be used to purchase a service to take re-supply cargo to the ISS, much the same as any business might purchase a service from FedEx to deliver a package to its customer. In the near term, the project will fund risk mitigation efforts for enabling technologies. AAS is in some ways a precursor to the 2nd Generation RLV. By accomplishing ISS resupply

  13. 100 Most Popular Business Leaders for Young Adults: Biographical Sketches and Professional Paths. Profiles and Pathways Series.

    ERIC Educational Resources Information Center

    Logan, Rochelle; Halverstadt, Julie

    This book, which is intended as a reference for teenagers and educators, profiles the lives and professional paths of the 100 most popular business leaders for young adults. Those profiled were selected for a number of reasons, including the following: their names are recognizable; they are associated with businesses and industries that are…

  14. Veterinary clinical pathologists in the biopharmaceutical industry.

    PubMed

    Schultze, A Eric; Bounous, Denise I; Bolliger, Anne Provencher

    2008-06-01

    There is an international shortage of veterinary clinical pathologists in the workplace. Current trainees in veterinary clinical pathology may choose to pursue careers in academe, diagnostic laboratories, government health services, biopharmaceutical companies, or private practice. Academic training programs attempt to provide trainees with an exposure to several career choices. However, due to the proprietary nature of much of the work in the biopharmaceutical industry, trainees may not be fully informed regarding the nature of work for veterinary clinical pathologists and the myriad opportunities that await employment in the biopharmaceutical industry. The goals of this report are to provide trainees in veterinary clinical pathology and other laboratory personnel with an overview of the work-life of veterinary clinical pathologists employed in the biopharmaceutical industry, and to raise the profile of this career choice for those seeking to enter the workforce. Biographical sketches, job descriptions, and motivation for 3 successful veterinary clinical pathologists employed in the biopharmaceutical industry are provided. Current and past statistics for veterinary clinical pathologists employed in the biopharmaceutical industry are reviewed. An overview of the drug development process and involvement of veterinary clinical pathologists in the areas of discovery, lead optimization, and candidate evaluation are discussed. Additional duties for veterinary clinical pathologists employed in the biopharmaceutical industry include development of biomarkers and new technologies, service as scientific resources, diagnostic support services, and laboratory management responsibilities. There are numerous opportunities available for trainees in veterinary clinical pathology to pursue employment in the biopharmaceutical industry and enjoy challenging and rewarding careers.

  15. Genetic and Chemical Profiling of Gymnema sylvestre Accessions from Central India: Its Implication for Quality Control and Therapeutic Potential of Plant.

    PubMed

    Verma, Ashutosh Kumar; Dhawan, Sunita Singh; Singh, Seema; Bharati, Kumar Avinash; Jyotsana

    2016-07-01

    Gymnema sylvestre , a vulnerable plant species, is mentioned in Indian Pharmacopeia as an antidiabetic drug. Study of genetic and chemical diversity and its implications in accessions of G. sylvestre . Fourteen accessions of G. sylvestre collected from Central India and assessment of their genetic and chemical diversity were carried out using ISSR (inter simple sequence repeat) and HPLC (high performance liquid chromatography) fingerprinting methods. Among the screened 40 ISSR primers, 15 were found polymorphic and collectively produced nine unique accession-specific bands. The maximum and minimum numbers of amplicones were noted for ISSR-15 and ISSR-11, respectively. The ISSR -11 and ISSR-13 revealed 100% polymorphism. HPLC chromatograms showed that accessions possess the secondary metabolites of mid-polarity with considerable variability. Unknown peaks with retention time 2.63, 3.41, 23.83, 24.50, and 44.67 were found universal type. Comparative hierarchical clustering analysis based on foresaid fingerprints indicates that both techniques have equal potential to discriminate accessions according to percentage gymnemic acid in their leaf tissue. Second approach was noted more efficiently for separation of accessions according to their agro-climatic/collection site. Highly polymorphic ISSRs could be utilized as molecular probes for further selection of high gymnemic acid yielding accessions. Observed accession specific bands may be used as a descriptor for plant accessions protection and converted into sequence tagged sites markers. Identified five universal type peaks could be helpful in identification of G. sylvestre -based various herbal preparations. Nine accession specific unique bandsFive marker peaks for G. sylvestre .Suitability of genetic and chemical fingerprinting Abbreviations used: HPLC: High Performance Liquid Chromatography, ISSR: Inter Simple Sequence Repeats, CTAB: Cetyl Trimethylammonium Bromide, DNTP: Deoxynucleotide Triphosphates.

  16. Vaccine production, distribution, access and uptake

    PubMed Central

    Smith, Jon; Lipsitch, Marc; Almond, Jeffrey W.

    2011-01-01

    Making human vaccines available on a global scale requires the use of complex production methods, meticulous quality control and reliable distribution channels that ensure the products are potent and effective at their point of use. The technologies involved in manufacturing different types of vaccines may strongly influence vaccine cost, ease of industrial scale-up, stability and ultimately world-wide availability. Manufacturing complexity is compounded by the need for different formulations for different countries and age groups. Reliable vaccine production in appropriate quantities and at affordable prices is the cornerstone of developing global vaccination policies. However, ensuring optimal access and uptake also requires strong partnerships between private manufacturers, regulatory authorities and national and international public health services. For vaccines whose supplies are limited, either due to rapidly emerging diseases or longer-term mismatch of supply and demand, prioritizing target groups can increase vaccine impact. Focusing on influenza vaccines as an example that well illustrates many of the relevant points, this article considers current production, distribution, access and other factors that ultimately impact on vaccine uptake and population-level effectiveness. PMID:21664680

  17. Vaccine production, distribution, access, and uptake.

    PubMed

    Smith, Jon; Lipsitch, Marc; Almond, Jeffrey W

    2011-07-30

    For human vaccines to be available on a global scale, complex production methods, meticulous quality control, and reliable distribution channels are needed to ensure that the products are potent and effective at the point of use. The technologies used to manufacture different types of vaccines can strongly affect vaccine cost, ease of industrial scale-up, stability, and, ultimately, worldwide availability. The complexity of manufacturing is compounded by the need for different formulations in different countries and age-groups. Reliable vaccine production in appropriate quantities and at affordable prices is the cornerstone of developing global vaccination policies. However, to ensure optimum access and uptake, strong partnerships are needed between private manufacturers, regulatory authorities, and national and international public health services. For vaccines whose supply is insufficient to meet demand, prioritisation of target groups can increase the effect of these vaccines. In this report, we draw from our experience of vaccine development and focus on influenza vaccines as an example to consider production, distribution, access, and other factors that affect vaccine uptake and population-level effectiveness. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Prediction of the acoustic pressure above periodically uneven facings in industrial workplaces

    NASA Astrophysics Data System (ADS)

    Ducourneau, J.; Bos, L.; Planeau, V.; Faiz, Adil; Skali Lami, Salah; Nejade, A.

    2010-05-01

    The aim of this work is to predict sound pressure in front of wall facings based on periodic sound scattering surface profiles. The method involves investigating plane wave reflections randomly incident upon an uneven surface. The waveguide approach is well suited to the geometries usually encountered in industrial workplaces. This method simplifies the profile geometry by using elementary rectangular volumes. The acoustic field in the profile interstices can then be expressed as the superposition of waveguide modes. In past work, walls considered are of infinite dimensions and are subjected to a periodic surface profile in only one direction. We therefore generalise this approach by extending its applicability to "double-periodic" wall facings. Free-field measurements have been taken and the observed agreement between numerical and experimental results supports the validity of the waveguide method.

  19. Effects of industrial canning on the proximate composition, bioactive compounds contents and nutritional profile of two Spanish common dry beans (Phaseolus vulgaris L.).

    PubMed

    Pedrosa, Mercedes M; Cuadrado, Carmen; Burbano, Carmen; Muzquiz, Mercedes; Cabellos, Blanca; Olmedilla-Alonso, Begoña; Asensio-Vegas, Carmen

    2015-01-01

    This study investigated the changes produced by canning in the proximate composition and in the bioactive constituents of two "ready to eat" Spanish beans. The foremost difference in the raw beans corresponded to the lectin: a higher content was found in raw Curruquilla beans (16.50 mg 100 mg(-1)) compared with raw Almonga beans (0.6 mg 100 mg(-1)). In general, industrial canning significantly increased the protein (>7%) and dietary fibre (>5%) contents of both beans varieties. However, the minerals, total α-galactosides and inositol phosphates contents were reduced (>25%) in both canned seeds. The trypsin inhibitors content was almost abolished by canning, and no lectins were found in either of the canned samples. Canned Curruquilla showed a decrease (38%) of their antioxidant activity. These "ready to eat" beans exhibited adequate nutritive profiles according to the USDA dietary recommendations. Furthermore, they had bioactive components content that are suitable for establishing a healthy lifestyle. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. [Generic drugs in Brazil: impacts of public policies upon the national industry].

    PubMed

    Quental, Cristiane; de Abreu, Jussanã Cristina; Bomtempo, José Vitor; Gadelha, Carlos Augusto Grabois

    2008-04-01

    This paper echoes recent works of Abrasco, Gadelha and Guimarães emphasizing the need for a better integration between health policies and industrial development and innovation policies as the only way to keep the economic benefits generated by health expenditures in the country instead of letting them escape through imports and threaten the continuity of the social policy by growing trade deficits. Although presenting the generic drug policy as a successful case in integrating social policies aimed at a better access to quality drugs for the population with economic policies aimed at industrial development, this paper discusses the impacts and limitations of the referred policy in a dialog with Abreu's analysis of industrial competitiveness in the Brazilian generics industry.

  1. Surface Glycosylation Profiles of Urine Extracellular Vesicles

    PubMed Central

    Gerlach, Jared Q.; Krüger, Anja; Gallogly, Susan; Hanley, Shirley A.; Hogan, Marie C.; Ward, Christopher J.

    2013-01-01

    Urinary extracellular vesicles (uEVs) are released by cells throughout the nephron and contain biomolecules from their cells of origin. Although uEV-associated proteins and RNA have been studied in detail, little information exists regarding uEV glycosylation characteristics. Surface glycosylation profiling by flow cytometry and lectin microarray was applied to uEVs enriched from urine of healthy adults by ultracentrifugation and centrifugal filtration. The carbohydrate specificity of lectin microarray profiles was confirmed by competitive sugar inhibition and carbohydrate-specific enzyme hydrolysis. Glycosylation profiles of uEVs and purified Tamm Horsfall protein were compared. In both flow cytometry and lectin microarray assays, uEVs demonstrated surface binding, at low to moderate intensities, of a broad range of lectins whether prepared by ultracentrifugation or centrifugal filtration. In general, ultracentrifugation-prepared uEVs demonstrated higher lectin binding intensities than centrifugal filtration-prepared uEVs consistent with lesser amounts of co-purified non-vesicular proteins. The surface glycosylation profiles of uEVs showed little inter-individual variation and were distinct from those of Tamm Horsfall protein, which bound a limited number of lectins. In a pilot study, lectin microarray was used to compare uEVs from individuals with autosomal dominant polycystic kidney disease to those of age-matched controls. The lectin microarray profiles of polycystic kidney disease and healthy uEVs showed differences in binding intensity of 6/43 lectins. Our results reveal a complex surface glycosylation profile of uEVs that is accessible to lectin-based analysis following multiple uEV enrichment techniques, is distinct from co-purified Tamm Horsfall protein and may demonstrate disease-specific modifications. PMID:24069349

  2. Computer aided design of extrusion forming tools for complex geometry profiles

    NASA Astrophysics Data System (ADS)

    Goncalves, Nelson Daniel Ferreira

    In the profile extrusion, the experience of the die designer is crucial for obtaining good results. In industry, it is quite usual the need of several experimental trials for a specific extrusion die before a balanced flow distribution is obtained. This experimental based trial-and-error procedure is time and money consuming, but, it works, and most of the profile extrusion companies rely on such method. However, the competition is forcing the industry to look for more effective procedures and the design of profile extrusion dies is not an exception. For this purpose, computer aided design seems to be a good route. Nowadays, the available computational rheology numerical codes allow the simulation of complex fluid flows. This permits the die designer to evaluate and to optimize the flow channel, without the need to have a physical die and to perform real extrusion trials. In this work, a finite volume based numerical code was developed, for the simulation of non-Newtonian (inelastic) fluid and non-isothermal flows using unstructured meshes. The developed code is able to model the forming and cooling stages of profile extrusion, and can be used to aid the design of forming tools used in the production of complex profiles. For the code verification three benchmark problems were tested: flow between parallel plates, flow around a cylinder, and the lid driven cavity flow. The code was employed to design two extrusion dies to produce complex cross section profiles: a medical catheter die and a wood plastic composite profile for decking applications. The last was experimentally validated. Simple extrusion dies used to produced L and T shaped profiles were studied in detail, allowing a better understanding of the effect of the main geometry parameters on the flow distribution. To model the cooling stage a new implicit formulation was devised, which allowed the achievement of better convergence rates and thus the reduction of the computation times. Having in mind the

  3. Italian and Spanish commercial tomato sauces for pasta dressing: study of sensory and head-space profiles by Flash Profiling and solid-phase microextraction-gas chomatography-mass spectrometry.

    PubMed

    Bendini, Alessandra; Vallverdú-Queralt, Anna; Valli, Enrico; Palagano, Rosa; Lamuela-Raventos, Rosa Maria; Toschi, Tullia Gallina

    2017-08-01

    The sensory and head-space profiles of Italian and Spanish commercial tomato sauces were investigated. The Flash Profiling method was used to evaluate sensory characteristics. Samples within each set were ranked according to selected descriptors. One hundred volatile compounds were identified by solid-phase microextraction-gas chomatography-mass spectrometry. For Italian samples, the sensory notes of basil/aromatic herbs, acid and cooked tomato were among those perceived most by the assessors, whereas, in Spanish samples, the sensory attributes of garlic/onion and onion/sweet pepper and, in Italian samples, cooked tomato were among those found most frequently. Data were elaborated using multivariate statistical approaches and interesting correlations were observed among the different sensory attributes and related volatile compounds. Spanish samples were characterized by the highest content of volatiles linked to the thermal treatment of tomatoes and to raw and sautéed garlic and onion, whereas the Italian samples were characterized by terpenic compounds typical of basil and volatile molecules derived from fresh tomato. These results confirm the influence of both formulation and production processes on the aromatic profile (sensory attributes and volatile compounds) of tomato products, which is probably related to the different eating habits and culinary traditions in Italy and Spain. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  4. Hedging their bets: tobacco and gambling industries work against smoke-free policies

    PubMed Central

    Mandel, L; Glantz, S

    2004-01-01

    Objective: To describe and understand the relationship between the tobacco and gambling industries in connection to their collaborative efforts to prevent smoke-free casinos and gambling facilities and fight smoke-free policies generally. Methods: Analysis of tobacco industry documents available online (accessed between February and December 2003). Results: The tobacco industry has worked to convince the gambling industry to fight against smoke-free environments. Representatives of the gambling industry with ties to the tobacco industry oppose smoke-free workplaces by claiming that smoke-free environments hurt gambling revenue and by promoting ventilation as a solution to secondhand smoke. With help from the tobacco industry, the gambling industry has become a force at the American Society of Heating Refrigeration and Air Conditioning Engineers opposing smoke-free ventilation standards for the hospitality industry. Conclusion: Tobacco industry strategies to mobilise the gambling industry to oppose smoke-free environments are consistent with past strategies to co-opt the hospitality industry and with strategies to influence policy from behind the scenes. Tobacco control advocates need to be aware of the connections between the tobacco and gambling industries in relation to smoke-free environments and work to expose them to the public and to policy makers. PMID:15333883

  5. Genetic and Chemical Profiling of Gymnema sylvestre Accessions from Central India: Its Implication for Quality Control and Therapeutic Potential of Plant

    PubMed Central

    Verma, Ashutosh Kumar; Dhawan, Sunita Singh; Singh, Seema; Bharati, Kumar Avinash; Jyotsana

    2016-01-01

    Background: Gymnema sylvestre, a vulnerable plant species, is mentioned in Indian Pharmacopeia as an antidiabetic drug Objective: Study of genetic and chemical diversity and its implications in accessions of G. sylvestre Materials and Methods: Fourteen accessions of G. sylvestre collected from Central India and assessment of their genetic and chemical diversity were carried out using ISSR (inter simple sequence repeat) and HPLC (high performance liquid chromatography) fingerprinting methods Results: Among the screened 40 ISSR primers, 15 were found polymorphic and collectively produced nine unique accession-specific bands. The maximum and minimum numbers of amplicones were noted for ISSR-15 and ISSR-11, respectively. The ISSR -11 and ISSR-13 revealed 100% polymorphism. HPLC chromatograms showed that accessions possess the secondary metabolites of mid-polarity with considerable variability. Unknown peaks with retention time 2.63, 3.41, 23.83, 24.50, and 44.67 were found universal type. Comparative hierarchical clustering analysis based on foresaid fingerprints indicates that both techniques have equal potential to discriminate accessions according to percentage gymnemic acid in their leaf tissue. Second approach was noted more efficiently for separation of accessions according to their agro-climatic/collection site Conclusion: Highly polymorphic ISSRs could be utilized as molecular probes for further selection of high gymnemic acid yielding accessions. Observed accession specific bands may be used as a descriptor for plant accessions protection and converted into sequence tagged sites markers. Identified five universal type peaks could be helpful in identification of G. sylvestre-based various herbal preparations. SUMMARY Nine accession specific unique bandsFive marker peaks for G. sylvestre.Suitability of genetic and chemical fingerprinting Abbreviations used: HPLC: High Performance Liquid Chromatography, ISSR: Inter Simple Sequence Repeats, CTAB: Cetyl

  6. Motivational Profiles and Motivation for Lifelong Learning of Medical Specialists.

    PubMed

    van der Burgt, Stéphanie M E; Kusurkar, Rashmi A; Wilschut, Janneke A; Tjin A Tsoi, Sharon L N M; Croiset, Gerda; Peerdeman, Saskia M

    2018-05-22

    Medical specialists face the challenge of maintaining their knowledge and skills and continuing professional development, that is, lifelong learning. Motivation may play an integral role in many of the challenges facing the physician workforce today including maintenance of a high performance. The aim of this study was to determine whether medical specialists show different motivational profiles and if these profiles predict differences in motivation for lifelong learning. An online questionnaire was sent to every medical specialist working in five hospitals in the Netherlands. The questionnaire included the validated Multidimensional Work Motivation Scale and the Jefferson Scale of Physician Lifelong Learning together with background questions like age, gender, and type of hospital. Respondents were grouped into different motivational profiles by using a two-step clustering approach. Four motivational profiles were identified: (1) HAMC profile (for High Autonomous and Moderate Controlled motivation), (2) MAMC profile (for Moderate Autonomous and Moderate Controlled motivation), (3) MALC profile (for Moderate Autonomous and Low Controlled motivation), and (4) HALC profile (for High Autonomous and Low Controlled motivation). Most of the female specialists that work in an academic hospital and specialists with a surgical specialty were represented in the HALC profile. Four motivational profiles were found among medical specialists, differing in gender, experience and type of specialization. The profiles are based on the combination of autonomous motivation (AM) and controlled motivation (CM) in the specialists. The profiles that have a high score on autonomous motivation have a positive association with lifelong learning.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work

  7. Molecular diversity and hypoglycemic polypeptide-P content of Momordica charantia in different accessions and different seasons.

    PubMed

    Tian, Miao; Zeng, Xiang-Qing; Song, Huan-Lei; Hu, Shan-Xin; Wang, Fu-Jun; Zhao, Jian; Hu, Zhi-Bi

    2015-04-01

    Momordica charantia (MC) has been used for treating diabetes mellitus from ancient times in Asia, Africa and South America. There are many MC accessions in local markets. Polypeptide-P as a main hypoglycemic component in MC was first studied in this experiment to illustrate the different contents in MC of different accessions and different harvesting times. Nineteen MC accessions collected from different regions were clustered into three groups using random amplified polymorphic DNA (RAPD) and inter-simple sequence repeat (ISSR) molecular markers. Content of polypeptide-P in the tested MC accessions was detected by western blot (WB) method. The WB results revealed that polypeptide-P was detected in MC accessions harvested in June and July but not in September and October. Furthermore, Polypeptide-P content corresponded well with the MC accessions. Our results suggest that the MC accessions and the harvesting times or the weather during harvest play significant roles in high content of polypeptide-P. © 2014 Society of Chemical Industry.

  8. New Guide Helps Industry Link with Department of Energy Labs

    Science.gov Websites

    . industry access to a "virtual" laboratory that can be tailored to meet specific requirements for Laboratory Coordinating Council. The guide explains how the DOE's Laboratory Coordinating Council gives U.S steel. Laboratory resources are available to help American companies address new opportunities, improve

  9. Annual Report to Congress on Foreign Economic Collection and Industrial Espionage, FY 2008

    DTIC Science & Technology

    2009-07-23

    Warcraft —could offer access to information that would be valuable to economic collectors or industrial espionage in the future. The virtual world ...Industrial Espionage, 2007. Economic espionage cases went up slightly and nearly every day brought reports—in the press and in the classified world —of...reports—in the press and in the classified world —of new cyber attacks against US Government and business entities. Additionally, the increasing use of

  10. ATAC-Seq analysis reveals a widespread decrease of chromatin accessibility in age-related macular degeneration.

    PubMed

    Wang, Jie; Zibetti, Cristina; Shang, Peng; Sripathi, Srinivasa R; Zhang, Pingwu; Cano, Marisol; Hoang, Thanh; Xia, Shuli; Ji, Hongkai; Merbs, Shannath L; Zack, Donald J; Handa, James T; Sinha, Debasish; Blackshaw, Seth; Qian, Jiang

    2018-04-10

    Age-related macular degeneration (AMD) is a significant cause of vision loss in the elderly. The extent to which epigenetic changes regulate AMD progression is unclear. Here we globally profile chromatin accessibility using ATAC-Seq in the retina and retinal pigmented epithelium (RPE) from AMD and control patients. Global decreases in chromatin accessibility occur in the RPE with early AMD, and in the retina of advanced disease, suggesting that dysfunction in the RPE drives disease onset. Footprints of photoreceptor and RPE-specific transcription factors are enriched in differentially accessible regions (DARs). Genes associated with DARs show altered expression in AMD. Cigarette smoke treatment of RPE cells recapitulates chromatin accessibility changes seen in AMD, providing an epigenetic link between a known risk factor for AMD and AMD pathology. Finally, overexpression of HDAC11 is partially responsible for the observed reduction in chromatin accessibility, suggesting that HDAC11 may be a potential new therapeutic target for AMD.

  11. Demographics and Trends in Wheeled Mobility Equipment Use and Accessibility in the Community

    ERIC Educational Resources Information Center

    LaPlante, Mitchell P.; Kaye, H. Stephen

    2010-01-01

    This article presents a profile of household-resident U.S. adults using wheeled mobility equipment (WME) in 2005, trends in WME use from 1990 to 2005, and data on accessibility features and problems from 1994-97. Data were obtained from the Survey of Income and Program Participation (SIPP) and the National Health Interview Survey on Disability…

  12. Traumatic brain injuries in the construction industry.

    PubMed

    Colantonio, Angela; McVittie, Doug; Lewko, John; Yin, Junlang

    2009-10-01

    This study analyses factors associated with work-related traumatic brain injury (TBI), specifically in the construction industry in Ontario, Canada. This cross-sectional study utilized data extracted from the Ontario Workplace Safety and Insurance Board (WSIB) records indicating concussion/intracranial injury that resulted in days off work in 2004-2005. Analyses of 218 TBI cases revealed that falls were the most common cause of injury, followed by being struck by or against an object. Mechanisms of injury and the temporal profile of injury also varied by age. For instance, a significantly higher proportion of injuries occurred in the mornings for young workers compared to older workers. The results of this study provide important information for prevention of TBI which suggest important age-specific strategies for workers in the construction industry.

  13. Company profile: Sistemic Ltd.

    PubMed

    Reid, Jim

    2013-09-01

    Founded in 2009 and headquartered in Glasgow, Scotland, UK, Sistemic Ltd has developed from a thought in the minds of four scientists into a company working globally to play its part in delivering the exciting opportunities for improvements in human health presented by cell therapies and regenerative medicine products (jointly referred to as the CT industry). Sistemic is now working in all corners of the world with some of the industry's leading companies to ensure that the products that they are developing, which will undoubtedly change the way we treat some of the major diseases and conditions currently placing a large burden on healthcare systems, including diabetes, dementia and cardiovascular disease, are as safe and efficacious as possible. Sistemic is also working to ensure that these products can be produced at a cost that will not lead to potentially transformational treatments being an additional financial burden on our already overburdened healthcare systems. Sistemic is using its revolutionary and IP-protected SistemQC™ (UK) technology to enhance understanding of characterization, process optimization and potency of CT products. The company is using the diagnostic power of miRNAs, a set of approximately 2000 ncRNAs that regulate a large percentage of the total gene expression of a cell. miRNAs are often present in a cell- and tissue-specific way that, at least in some cases, accounts for the phenotypic differences between cell types. These differences in miRNA expression can be interpreted by the miRNA profile and it is interpreting the instructive power of these profiles that underpin Sistemic's knowledge bases, giving CT companies a more comprehensive understanding of their cell populations with respect to their identity and functional capabilities. This knowledge is being used by companies to characterize, process, optimize and assess the efficacy of cell products.

  14. Proposed changes to the reimbursement of pharmaceuticals and medical devices in Poland and their impact on market access and the pharmaceutical industry

    PubMed Central

    Badora, Karolina; Caban, Aleksandra; Rémuzat, Cécile; Dussart, Claude; Toumi, Mondher

    2017-01-01

    ABSTRACT In Poland, two proposed amendments to the reimbursement act are currently in preparation; these are likely to substantially change the pricing and reimbursement landscape for both drugs and medical devices. Proposed changes include: alignment of medical device reimbursement with that of pharmaceuticals; relaxing the strict reimbursement criteria for ultra-orphan drugs; establishment of an additional funding category for vaccines; introduction of compassionate use, and a simplified reimbursement pathway for well-established off-label indications; appreciation of manufacturers’ innovation and research and development efforts by creating a dedicated innovation budget; introduction of a mechanism preventing excessive parallel import; prolonged duration of reimbursement decisions and reimbursement lists; and increased flexibility in defining drug programmes. Both amendments are still at a draft stage and many aspects of the new regulations remain unclear. Nonetheless, the overall direction of some of the changes is already evident and warrants discussion due to their high expected impact on pharmaceutical and device manufacturers. Here we evaluate the main changes proposed to the reimbursement of drugs, vaccines, and medical devices, and examine the impact they are likely to have on market access and pharmaceutical industry in Poland. PMID:29081924

  15. Overview of crew member energy expenditure during Shuttle Flight 61-8 EASE/ACCESS task performance

    NASA Technical Reports Server (NTRS)

    Horrigan, D. J.; Waligora, J. W.; Stanford, J.; Edwards, B. F.

    1987-01-01

    The energy expenditure of the Shuttle Flight 61-B crewmembers during the extravehicular performance of Experimental Assembly of Structures in EVA (EASE) and Assembly Concept of Construction of Space Structures (ACCESS) construction system tasks are reported. These data consist of metabolic rate time profiles correlated with specific EASE and ACCESS tasks and crew comments. Average extravehicular activity metabolic rates are computed and compared with those reported from previous Apollo, Shylab, and Shuttle flights. These data reflect total energy expenditure and not that of individual muscle groups such as hand and forearm. When correlated with specific EVA tasks and subtasks, the metabolic profile data is expected to be useful in planning future EVA protocols. For example, after experiencing high work rates and apparent overheating during some Gemini EVAs, it was found useful to carefully monitor work rates in subsequent flights to assess the adequacy of cooling garments and as an aid to preplanning EVA procedures. This presentation is represented by graphs and charts.

  16. 78 FR 31800 - Accessible Emergency Information, and Apparatus Requirements for Emergency Information and Video...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-24

    ...] Accessible Emergency Information, and Apparatus Requirements for Emergency Information and Video Description... should be the obligation of the apparatus manufacturer, under section 203, to ensure that the devices are... secondary audio stream on all equipment, including older equipment. In the absence of an industry solution...

  17. Educating and training industrial ecologists for the 1990s.

    PubMed

    Troxell, D E

    1992-02-01

    For industrial ecology to become a reality and flourish, many talents must be integrated into a single system. Basically, there are four types of technologists who must be brought together to create a system: (i) technical specialists-those that can take the state of knowledge to the state of the art and eventually to the state of practice; (ii) technical "generalists"-those that can integrate diverse technologies into a comprehensive solution; (iii) technical managers-those that can lead technical efforts to an optimal solution (these people must have management skills in their area); and (iv) program managers-those that can understand and merge the overall efforts of technology, business, schedule, and finance. The initial questions for industrial ecology in the 1990s are: Do these people presently exist in industry? What will be needed to bring new people (recent graduates) into the field of industrial ecology? For this decade, the people who will develop and lead the concept of industrial ecology are presently in industry. However, certainly few, if any, today understand the concept of industrial ecology as a system issue. Training will be needed for these practitioners of the 1990s so that the overall goal and the mechanism for achieving industrial ecology are understood. A three-tiered approach is presented to define the education/training needed, to conduct training on an industry basis, and then to initiate the training to be done within a corporation. The three tiers propose the use of universities, professional societies, and industry groups. Having universities participate in the training of the 1990s industrial ecologists will give universities insight to the development of industrial ecology, and access to industry needs so that curriculum can be initiated to educate the industrial ecologists of the future.

  18. Open-access microfluidic patch-clamp array with raised lateral cell trapping sites.

    PubMed

    Lau, Adrian Y; Hung, Paul J; Wu, Angela R; Lee, Luke P

    2006-12-01

    A novel open-access microfluidic patch-clamp array chip with lateral cell trapping sites raised above the bottom plane of the chip was developed by combining both a microscale soft-lithography and a macroscale polymer fabrication method. This paper demonstrates the capability of using such an open-access fluidic system for patch-clamp measurements. The surface of the open-access patch-clamp sites prepared by the macroscale hole patterning method of soft-state elastic polydimethylsiloxane (PDMS) is examined; the seal resistances are characterized and correlated with the aperture dimensions. Whole cell patch-clamp measurements are carried out with CHO cells expressing Kv2.1 ion channels. Kv2.1 ion channel blocker (TEA) dosage response is characterized and the binding activity is examined. The results demonstrate that the system is capable of performing whole cell measurements and drug profiling in a more efficient manner than the traditional patch-clamp set-up.

  19. Application of microbial α-amylase in industry - A review.

    PubMed

    de Souza, Paula Monteiro; de Oliveira Magalhães, Pérola

    2010-10-01

    Amylases are one of the main enzymes used in industry. Such enzymes hydrolyze the starch molecules into polymers composed of glucose units. Amylases have potential application in a wide number of industrial processes such as food, fermentation and pharmaceutical industries. α-Amylases can be obtained from plants, animals and microorganisms. However, enzymes from fungal and bacterial sources have dominated applications in industrial sectors. The production of α-amylase is essential for conversion of starches into oligosaccharides. Starch is an important constituent of the human diet and is a major storage product of many economically important crops such as wheat, rice, maize, tapioca, and potato. Starch-converting enzymes are used in the production of maltodextrin, modified starches, or glucose and fructose syrups. A large number of microbial α-amylases has applications in different industrial sectors such as food, textile, paper and detergent industries. The production of α-amylases has generally been carried out using submerged fermentation, but solid state fermentation systems appear as a promising technology. The properties of each α-amylase such as thermostability, pH profile, pH stability, and Ca-independency are important in the development of fermentation process. This review focuses on the production of bacterial and fungal α-amylases, their distribution, structural-functional aspects, physical and chemical parameters, and the use of these enzymes in industrial applications.

  20. Broadband Access and Implications for Efforts to Address Equity Gaps in Postsecondary Attainment

    ERIC Educational Resources Information Center

    Sisneros, Lauren; Sponsler, Brian A.

    2016-01-01

    This education trends report focuses on two related but distinct challenges confronting state policy leaders and students as they seek to leverage online distance education to meet personal and statewide education goals: (1) access to the infrastructure necessary to provide industry-standard broadband speeds and (2) ensuring availability of the…

  1. Medication abortion: Potential for improved patient access through pharmacies.

    PubMed

    Raifman, Sarah; Orlando, Megan; Rafie, Sally; Grossman, Daniel

    2018-05-08

    To discuss the potential for improving access to early abortion care through pharmacies in the United States. Despite the growing use of medications to induce termination of early pregnancy, pharmacist involvement in abortion care is currently limited. The Food and Drug Administration's Risk Evaluation and Mitigation Strategy (REMS) for Mifeprex® (mifepristone 200 mg), the principal drug used in early medication abortion, prohibits the dispensing of the drug by prescription at pharmacies. This commentary reviews the pharmacology of medication abortion with the use of mifepristone and misoprostol, as well as aspects of service delivery and data on safety, efficacy, and acceptability. Given its safety record, mifepristone no longer fits the profile of a drug that requires an REMS. The recent implementation of pharmacy dispensing of mifepristone in community pharmacies in Australia and some provinces of Canada has improved access to medication abortion by increasing the number of medication abortion providers, particularly in rural areas. Provision of mifepristone in pharmacies, which involves dispensing and patient counseling, would likely improve access to early abortion in the United States without increasing risks to women. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  2. Private Graphs - Access Rights on Graphs for Seamless Navigation

    NASA Astrophysics Data System (ADS)

    Dorner, W.; Hau, F.; Pagany, R.

    2016-06-01

    After the success of GNSS (Global Navigational Satellite Systems) and navigation services for public streets, indoor seems to be the next big development in navigational services, relying on RTLS - Real Time Locating Services (e.g. WIFI) and allowing seamless navigation. In contrast to navigation and routing services on public streets, seamless navigation will cause an additional challenge: how to make routing data accessible to defined users or restrict access rights for defined areas or only to parts of the graph to a defined user group? The paper will present case studies and data from literature, where seamless and especially indoor navigation solutions are presented (hospitals, industrial complexes, building sites), but the problem of restricted access rights was only touched from a real world, but not a technical perspective. The analysis of case studies will show, that the objective of navigation and the different target groups for navigation solutions will demand well defined access rights and require solutions, how to make only parts of a graph to a user or application available to solve a navigational task. The paper will therefore introduce the concept of private graphs, which is defined as a graph for navigational purposes covering the street, road or floor network of an area behind a public street and suggest different approaches how to make graph data for navigational purposes available considering access rights and data protection, privacy and security issues as well.

  3. The Different Facets of Work Stress: A Latent Profile Analysis of Nurses' Work Demands.

    PubMed

    Jenull, Brigitte B; Wiedermann, Wolfgang

    2015-10-01

    Work-related stress has been identified as a relevant problem leading to negative effects on health and quality of life. Using data from 844 nurses, latent profile analyses (LPA) were applied to identify distinct patterns of work stress. Several sociodemographic variables, including nurses' working and living conditions, as well as nurses' reactions to workload, were considered to predict respondents' profile membership. LPA revealed three distinct profiles that can be distinguished by a low, moderate, and higher stress level. Being financially secure is positively related to the low stress profile, whereas working in an urban area and having low job satisfaction increases the chance of belonging to the higher stress profile. Our results can be used as a basis to develop interventions to create a healthy nursing home environment by supporting the balance between family and work, providing access to job resources and optimizing recovery opportunities. © The Author(s) 2013.

  4. New lidar challenges for gas hazard management in industrial environments

    NASA Astrophysics Data System (ADS)

    Cézard, Nicolas; Liméry, Anasthase; Bertrand, Johan; Le Méhauté, Simon; Benoit, Philippe; Fleury, Didier; Goular, Didier; Planchat, Christophe; Valla, Matthieu; Augère, Béatrice; Dolfi-Bouteyre, Agnès.

    2017-10-01

    The capability of Lidars to perform range-resolved gas profiles makes them an appealing choice for many applications. In order to address new remote sensing challenges, arising from industrial contexts, Onera currently develops two lidar systems, one Raman and one DIAL. On the Raman side, a high spatial-resolution multi-channel Raman Lidar is developed in partnership with the French National Radioactive Waste Management Agency (Andra). This development aims at enabling future monitoring of hydrogen gas and water vapor profiles inside disposal cells containing radioactive wastes. We report on the development and first tests of a three-channel Raman Lidar (H2, H2O, N2) designed to address this issue. Simultaneous hydrogen and water vapor profiles have been successfully performed along a 5m-long gas cell with 1m resolution at a distance of 85 m. On the DIAL side, a new instrumental concept is being explored and developed in partnership with Total E and P. The objective is to perform methane plume monitoring and flux assessment in the vicinity of industrials plants or platforms. For flux assessment, both gas concentration and air speed must be profiled by lidar. Therefore, we started developing a bi-function, all-fiber, coherent DIAL/Doppler Lidar. The first challenge was to design and build an appropriate fiber laser source. The achieved demonstrator delivers 200 W peak power, polarized, spectrally narrow (<15 MHz), 110 ns pulses of light out of a monomode fiber at 1645 nm. It fulfills the requirements for a future implementation in a bi-function Dial/Doppler lidar with km-range expectation. We report on the laser and lidar architecture, and on first lidar tests at 1645 nm.

  5. Excluding the poor from accessing biomedical literature: a rights violation that impedes global health.

    PubMed

    Yamey, Gavin

    2008-01-01

    Most biomedical journals charge readers a hefty access toll to read the full text version of a published research article. These tolls bring enormous profits to the traditional corporate publishing industry, but they make it impossible for most people worldwide--particularly in low and middle income countries--to access the biomedical literature. Traditional publishers also insist on owning the copyright on these articles, making it illegal for readers to freely distribute and photocopy papers, translate them, or create derivative educational works. This article argues that excluding the poor from accessing and freely using the biomedical research literature is harming global public health. Health care workers, for example, are prevented from accessing the information they need to practice effective medicine, while policymakers are prevented from accessing the essential knowledge they require to build better health care systems. The author proposes that the biomedical literature should be considered a global public good, basing his arguments upon longstanding and recent international declarations that enshrine access to scientific and medical knowledge as a human right. He presents an emerging alternative publishing model, called open access, and argues that this model is a more socially responsive and equitable approach to knowledge dissemination.

  6. A Profile of Tax Subsidies and Investment Behavior in Six Major Polluting Industries (1997)

    EPA Pesticide Factsheets

    Reviews investment trends in pollution control technology to determine existing patterns and to highlight the likely investment incentives that six industries, metals mining, petroleum, primary metals, pulp and paper, chemicals, and electric utilities.

  7. Lowering industry firewalls: pre-competitive informatics initiatives in drug discovery.

    PubMed

    Barnes, Michael R; Harland, Lee; Foord, Steven M; Hall, Matthew D; Dix, Ian; Thomas, Scott; Williams-Jones, Bryn I; Brouwer, Cory R

    2009-09-01

    Pharmaceutical research and development is facing substantial challenges that have prompted the industry to shift funding from early- to late-stage projects. Among the effects is a major change in the attitude of many companies to their internal bioinformatics resources: the focus has moved from the vigorous pursuit of intellectual property towards exploration of pre-competitive cross-industry collaborations and engagement with the public domain. High-quality, open and accessible data are the foundation of pre-competitive research, and strong public-private partnerships have considerable potential to enhance public data resources, which would benefit everyone engaged in drug discovery. In this article, we discuss the background to these changes and propose new areas of collaboration in computational biology and chemistry between the public domain and the pharmaceutical industry.

  8. Application of the dynamic model of Saeman to an industrial rotary kiln incinerator: numerical and experimental results.

    PubMed

    Ndiaye, L G; Caillat, S; Chinnayya, A; Gambier, D; Baudoin, B

    2010-07-01

    In order to simulate granular materials structure in a rotary kiln under the steady-state regime, a mathematical model has been developed by Saeman (1951). This model enables the calculation of the bed profiles, the axial velocity and solids flow rate along the kiln. This model can be coupled with a thermochemical model, in the case of a reacting moving bed. This dynamic model was used to calculate the bed profile for an industrial size kiln and the model projections were validated by measurements in a 4 m diameter by 16 m long industrial rotary kiln. The effect of rotation speed under solids bed profile and the effect of the feed rate under filling degree were established. On the basis of the calculations and the experimental results a phenomenological relation for the residence time estimation was proposed for the rotary kiln. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

  9. Global Trends in Space Access and Utilization

    NASA Technical Reports Server (NTRS)

    Rahman, Shamim A.; Keim, Nicholas S.; Zeender, Peter E.

    2010-01-01

    In the not-so-distant past, space access and air/space technology superiority were within the purview of the U.S. and former Soviet Union's respective space agencies, both vying for global leadership in space exploitation. In more recent years, with the emergence of the European Space Agency (ESA) member countries and Asian countries joining the family of space-faring nations, it is truer now more than ever that space access and utilization has become a truly global enterprise. In fact, according to the Space Report 2007, this enterprise is a $251-billion economy. It is possible to gauge the vitality of worldwide efforts from open sources in today's transparent, media-based society. In particular, print and web broadcasters regularly report and catalog global space activities for defense and civil purposes. For the purposes of this paper, a representative catalog of missions is used to illustrate the nature of the emerging "globalization." This paper highlights global trends in terms of not only the providers of space access, but also the end-users for the various recently accomplished missions. With well over 50 launches per year, in recent years, the launch-log reveals a surprising percentage of "cooperative or co-dependent missions" where different agencies, countries, and/or commercial entities are so engaged presumably to the benefit of all who participate. Statistics are cited and used to show that recently over d0% of the 50-plus missions involved multiple nations working collectively to deliver payloads to orbit. Observers, space policy professionals, and space agency leaders have eloquently proposed that it might require the combined resources and talents of multiple nations to advance human exploration goals beyond low earth orbit. This paper does not intend to offer new information with respect to whether international collaboration is necessary but to observe that, in continuing to monitor global trends, the results seem to support the thesis that a

  10. Empower: access to medicine - working towards early access.

    PubMed

    Pearson, Jennifer Bryant; Turgoose, James; Hargrave, James

    2015-01-01

    Empower: Access to Medicine's contribution will document the founding of Empower: Access to Medicine and tactics used to create a lobbying campaign designed to facilitate the debate around barriers to medical innovation and patient access to medicines. The article will detail the evolution of the campaign's goals and the potential solutions to an expensive and slow system. Specifically the submission will look at the influence that Empower: Access to Medicine had on the Government's thinking and development of an early access scheme.

  11. Integrative Analysis of Complex Cancer Genomics and Clinical Profiles Using the cBioPortal

    PubMed Central

    Gao, Jianjiong; Aksoy, Bülent Arman; Dogrusoz, Ugur; Dresdner, Gideon; Gross, Benjamin; Sumer, S. Onur; Sun, Yichao; Jacobsen, Anders; Sinha, Rileen; Larsson, Erik; Cerami, Ethan; Sander, Chris; Schultz, Nikolaus

    2014-01-01

    The cBioPortal for Cancer Genomics (http://cbioportal.org) provides a Web resource for exploring, visualizing, and analyzing multidimensional cancer genomics data. The portal reduces molecular profiling data from cancer tissues and cell lines into readily understandable genetic, epigenetic, gene expression, and proteomic events. The query interface combined with customized data storage enables researchers to interactively explore genetic alterations across samples, genes, and pathways and, when available in the underlying data, to link these to clinical outcomes. The portal provides graphical summaries of gene-level data from multiple platforms, network visualization and analysis, survival analysis, patient-centric queries, and software programmatic access. The intuitive Web interface of the portal makes complex cancer genomics profiles accessible to researchers and clinicians without requiring bioinformatics expertise, thus facilitating biological discoveries. Here, we provide a practical guide to the analysis and visualization features of the cBioPortal for Cancer Genomics. PMID:23550210

  12. Interfaces to PeptideAtlas: a case study of standard data access systems

    PubMed Central

    Handcock, Jeremy; Robinson, Thomas; Deutsch, Eric W.; Boyle, John

    2012-01-01

    Access to public data sets is important to the scientific community as a resource to develop new experiments or validate new data. Projects such as the PeptideAtlas, Ensembl and The Cancer Genome Atlas (TCGA) offer both access to public data and a repository to share their own data. Access to these data sets is often provided through a web page form and a web service API. Access technologies based on web protocols (e.g. http) have been in use for over a decade and are widely adopted across the industry for a variety of functions (e.g. search, commercial transactions, and social media). Each architecture adapts these technologies to provide users with tools to access and share data. Both commonly used web service technologies (e.g. REST and SOAP), and custom-built solutions over HTTP are utilized in providing access to research data. Providing multiple access points ensures that the community can access the data in the simplest and most effective manner for their particular needs. This article examines three common access mechanisms for web accessible data: BioMart, caBIG, and Google Data Sources. These are illustrated by implementing each over the PeptideAtlas repository and reviewed for their suitability based on specific usages common to research. BioMart, Google Data Sources, and caBIG are each suitable for certain uses. The tradeoffs made in the development of the technology are dependent on the uses each was designed for (e.g. security versus speed). This means that an understanding of specific requirements and tradeoffs is necessary before selecting the access technology. PMID:22941959

  13. Ultra-low profile Ovation device: is it the definitive solution for EVAR?

    PubMed

    de Donato, G; Setacci, F; Sirignano, P; Galzerano, G; Borrelli, M P; di Marzo, L; Setacci, C

    2014-02-01

    When Juan Parodi implanted an endograft in a human body for the first time on September 7, 1990 in Buenos Aires, Argentina, the delivery system of the handmade device was primitive, extremely rigid, and had a bulky profile of 27 French (F). Since then, stent-graft technology has evolved rapidly, limitations of earlier-generation devices have been overtaken, and endovascular aneurysm repair (EVAR) eligibility has increased enormously. Nevertheless (still) challenging aortoiliac anatomy such as short and complex proximal aortic neck seal zones and narrow access vessels are responsible for EVAR ineligibility in up to 50% of cases. The Ovation Prime abdominal stent-graft system (TriVascular, Inc., Santa Rosa, CA, USA) is a trimodular device designed with the aortic body delivered via a flexible, hydrophilic-coated, ultra-low profile catheter (14-F outer diameter - OD). The aortic body is provided with a suprarenal nitinol stent with anchors that provide active fixation, while a network of rings and channels that are inflated with a low-viscosity radiopaque polymer during stent-graft deployment, provides effective sealing. The previous EVAR technology aimed to both anchor and seal using stents combined with fabric, with neither optimized for their roles and each forced to compete for the same space within their delivery catheters, which inevitably led to larger profile of the delivery system. The technical revolution of the Ovation endograft includes the idea to truly uncouple the stages of stent-graft fixation and seal during the procedure. In the Ovation endograft platform, stent and fabric are not competing the same space within the delivery system and an ultra-low profile delivery can be achieved without compromise. With such a low-profile delivery catheter, approximately 90% of men and 70% of women with abdominal aortic aneurysm have access vessel diameters considered fit for endovascular repair. The aim of this review paper was to analyze the main properties of

  14. A simplified hardwood log-sawing program for three-dimensional profile data

    Treesearch

    R. Edward Thomas

    2011-01-01

    Current laser scanning systems in sawmills collect low-resolution three-dimensional (3D) profiles of logs. However, these scanners are capable of much more. As a demonstration, the U.S. Forest Service, Forestry Sciences Laboratory in Princeton, WV, constructed a 3D laser log scanner using off -the-shelf industrial scanning components.

  15. Profiles of family needs of children and youth with cerebral palsy.

    PubMed

    Almasri, N; Palisano, R J; Dunst, C; Chiarello, L A; O'Neil, M E; Polansky, M

    2012-11-01

    To identify profiles of family needs of families of children and youth with cerebral palsy (CP), and determine whether profile membership is related to child, family and service characteristics. Participants were mostly mothers (80%) of 579 children and youth with CP. A family member completed modified version of the Family Needs Survey and questionnaires about their child, family and services. Research assistants determined the Gross Motor Function Classification System levels. K-means cluster analysis identified profiles of needs. Cluster membership was analysed to examine differences in clusters based on selected characteristics. Four profiles of needs were identified: Low needs, Needs related to community and financial resources, Needs related to child health condition and High needs. Profile membership was differentiated based on child/youth gross motor function, adaptive behaviour, family relationships, family income, access and effort to co-ordinate services. Despite heterogeneity among individuals with CP and their families, four profiles of family needs were identified. In total, 51% of families had low needs suggesting that they are effectively managing their children's health conditions while 11% of families had high needs that may require high levels of services and supports. Service providers are encouraged to partner with families, provide anticipatory guidance and co-ordinate services. © 2011 Blackwell Publishing Ltd.

  16. Concentrations, profiles, and estimated human exposures for polychlorinated dibenzo-p-dioxins and dibenzofurans from electronic waste recycling facilities and a chemical industrial complex in Eastern China.

    PubMed

    Ma, Jing; Kannan, Kurunthachalam; Cheng, Jinping; Horii, Yuichi; Wu, Qian; Wang, Wenhua

    2008-11-15

    Environmental pollution arising from electronic waste (e-waste) disposal and recycling has received considerable attention in recent years. Treatment, at low temperatures, of e-wastes that contain polyvinylchloride and related polymers can release polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Although several studies have reported trace metals and polybrominated diphenyl ethers (PBDEs) released from e-waste recycling operations, environmental contamination and human exposure to PCDD/Fs from e-waste recycling operations are less well understood. In this study, electronic shredder waste and dust from e-waste facilities, and leaves and surface soil collected in the vicinity of a large scale e-waste recycling facility in Taizhou, Eastern China, were analyzed for total PCDD/ Fs including 2,3,7,8-substituted congeners. We also determined PCDD/Fs in surface agricultural soils from several provinces in China for comparison with soils from e-waste facilities. Concentrations of total PCDD/Fs were high in all of the matrices analyzed and ranged from 30.9 to 11400 pg/g for shredder waste, 3460 to 9820 pg/g dry weight for leaves, 2560 to 148000 pg/g dry weight for workshop-floor dust, and 854 to 10200 pg/g dry weight for soils. We also analyzed surface soils from a chemical industrial complex (a coke-oven plant, a coal-fired power plant, and a chlor-alkali plant) in Shanghai. Concentrations of total PCDD/Fs in surface soil (44.5-531 pg/g dry wt) from the chemical industrial complex were lower than the concentrations found in soils from e-waste recycling plants, but higher than the concentrations found in agricultural soils. Agricultural soils from six cities in China contained low levels (3.44-33.8 pg/g dry wt) of total PCDD/Fs. Profiles of dioxin toxic equivalents (TEQs) of 2,3,7,8-PCDD/Fs in soils from e-waste facilities in Taizhou differed from the profiles found in agricultural soils. The estimated daily intakes of TEQs of PCDD/ Fs via soil/dust ingestion

  17. Travel behavior of low income older adults and implementation of an accessibility calculator

    PubMed Central

    Moniruzzaman, Md; Chudyk, Anna; Páez, Antonio; Winters, Meghan; Sims-Gould, Joanie; McKay, Heather

    2016-01-01

    Given the aging demographic landscape, the concept of walkable neighborhoods has emerged as a topic of interest, especially during the last decade. However, we know very little about whether walkable neighborhoods promote walking among older adults, particularly those with lower incomes. Therefore in this paper we: (i) examine the relation between trip distance and sociodemographic attributes and accessibility features of lower income older adults in Metro Vancouver; and, (ii) implement a web-based application to calculate the accessibility of lower income older adults in Metro Vancouver based on their travel behavior. We use multilevel linear regression to estimate the determinants of trip length. We find that in this population distance traveled is associated with gender, living arrangements, and dog ownership. Furthermore, significant geographical variations (measured using a trend surface) were also found. To better visualize the impact of travel behavior on accessibility by personal profile and location, we also implemented a web-based calculator that generates an Accessibility (A)-score using Google Maps API v3 that can be used to evaluate the accessibility of neighborhoods from the perspective of older adults. PMID:27104148

  18. Competitive position of natural gas: industrial baking. Topical report, December 1986-January 1988

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Minsker, B.S.; Salama, S.Y.

    To quantify the competitive position of natural gas in industrial baking, market profiles were developed to define current technologies (single lap, tunnel, and Lanham ovens are predominant) and to characterize the applications and use of each technology in industrial baking. Important cost and performance parameters were identified and validated through interviews with industry representatives. Two areas of research that could improve technologies' effectiveness are advanced burner controls activated based on oven load that could reduce product loss, the largest coast associated with the oven, and cogeneration, which could penetrate the baking market if the high capital costs associated with existingmore » equipment could be reduced.« less

  19. Use of DNA Microarrays to Identify Diagnostic Signature Transcription Profiles for Host Responses to Infectious Agents

    DTIC Science & Technology

    2004-10-01

    informative in this regard. Key signature genes will serve as the basis for rapid diagnostic approaches that could be accessed when an outbreak is suspected...AD Award Number: DAMD17-01-1-0787 TITLE: Use of DNA Microarrays to Identify Diagnostic Signature Transcription Profiles for Host Responses to...Sep 2004) 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS Use of DNA Microarrays to Identify Diagnostic Signature DAMD17-01-1-0787 Transcription Profiles for

  20. Vertical profile, source apportionment, and toxicity of PAHs in sediment cores of a wharf near the coal-based steel refining industrial zone in Kaohsiung, Taiwan.

    PubMed

    Chen, Chih-Feng; Chen, Chiu-Wen; Ju, Yun-Ru; Dong, Cheng-Di

    2016-03-01

    Three sediment cores were collected from a wharf near a coal-based steel refining industrial zone in Kaohsiung, Taiwan. Analyses for 16 polycyclic aromatic hydrocarbons (PAHs) of the US Environmental Protection Agency priority list in the core sediment samples were conducted using gas chromatography-mass spectrometry. The vertical profiles of PAHs in the core sediments were assessed, possible sources and apportionment were identified, and the toxicity risk of the core sediments was determined. The results from the sediment analyses showed that total concentrations of the 16 PAHs varied from 11774 ± 4244 to 16755 ± 4593 ng/g dry weight (dw). Generally, the vertical profiles of the PAHs in the sediment cores exhibited a decreasing trend from the top to the lower levels of the S1 core and an increasing trend of PAHs from the top to the lower levels of the S2 and S3 cores. Among the core sediment samples, the five- and six-ring PAHs were predominantly in the S1 core, ranging from 42 to 54 %, whereas the composition of the PAHs in the S2 and S3 cores were distributed equally across three groups: two- and three-ring, four-ring, and five- and six-ring PAHs. The results indicated that PAH contamination at the site of the S1 core had a different source. The molecular indices and principal component analyses with multivariate linear regression were used to determine the source contributions, with the results showing that the contributions of coal, oil-related, and vehicle sources were 38.6, 35.9, and 25.5 %, respectively. A PAH toxicity assessment using the mean effect range-median quotient (m-ERM-q, 0.59-0.79), benzo[a]pyrene toxicity equivalent (TEQ(carc), 1466-1954 ng TEQ/g dw), and dioxin toxicity equivalent (TEQ(fish), 3036-4174 pg TEQ/g dw) identified the wharf as the most affected area. The results can be used for regular monitoring, and future pollution prevention and management should target the coal-based industries in this region for pollution reduction.