13 Oct 2010 ... En ambientes de muy baja gravedad, en cambio, no se necesita ning?n ... hechas de aleaci?n de titanio, vidrio met?lico, y acero inoxidable. ...

13 Oct 2010 ... El acero inoxidable es una aleaci?n (mezcla de hierro, n?quel y cromo), as? como lo es la mayor parte de la orfebrer?a (oro y n?quel). ...

Ion nitriding is a glow discharge process that is used to induce surface modification in metals. It has been applied to 316-L austenitic stainless steel looking for similar benefits already obtained in other steels. An austenitic stainless steel was selec...

The relationship between the degree of sensitization and the corrosion resistance of austenitic stainless steel has been reported since long time, however this relationship does not account for all the experimental results reported on the literature. The ...

Sensitization is a cause of corrosion that has been widely studied in austenitic steels; however, the relationship between sensitization and mechanical properties of steel is less known. Therefore, the objective of this work is to study the mechanical pro...

The intergranular stress cracking of welded joints of austenitic stainless steel, AISI 304, is a serious problem in BWR type reactors. It is associated with the simultaneous presence of three factors; stress, a critical media and sensibilization (DOS). EP...

Corrosion susceptibility under stress of AISI 304 steel sensitized in a sodium thiocyanate solution has been studied and results were compared with those obtained with solutions of thiosulfate and tetrathionate. Sensitized steel type 304 is highly suscept...

The relationship between: microstructure-heat treatment, microstructure-mechanical properties, microstructure-corrosion resistance make that the study of the microstructure of metals and alloys be a powerful tool either in technical-scientific research as...

d'aciers inoxidables austenitiques nickel-chrome". Academie des Science, Comptes Rendus, Paris. Vol. 264,. No. 5, Jan. 30, 1967, pp. 425-428. ...

... been recorded in the diet1. Terrestrial A small police outpost was established on the island in 1969. ... 40 birds, but given its high levels of recruitment, this is probably not a serious threat, t...

The publication presents the papers delivered in a workshop about trials and selection of the steels and their thermal treatments for stamping industry.

... including a direct microscopic examination and sodium nitrate flotation, completed during quarantine in May 2002 were negative ... negative for acid-fast staining organisms. Four fecal flotation examinati...

Initial Environmental Impact Assessment. 1991. J.M. Acero, J.L. Agraz, C.A. Aguirre and J. Plotz. Instituto Antartico Argentino and Alfred Wegener Institut ...

-- 116. Bhattachary, D. 1998. Enviromental values: a critical ap� praisal of cost�benefit analysis

Environmental impact assessment associated with the salvage operation of the ... Initial Environmental Impact Assessment. 1991. J.M. Acero, J.L. Agraz, C.A. ...

grant (FA9550-04-1-0117), an AFRL grant via Veridian and an NSF grant (IIS-0534707). We thank A. Acero

The purpose of the publication is to explain in an easy way the traditional process of steel manufacturing, and to promote the interest of the foundrymen working without large investment.

Many tropical fruits are rich in anthocyanins, though limited information is available about the characterization and quantification of these anthocyanins. The identification of anthocyanin pigments in four tropical fruits was determined by ion trap mass spectrometry. Fruits studied included acero...

can be included in modeling the language (Wang, 2000; Erdogan et al., 2002). In this article, we accuracy may indeed be two very different businesses after all. References Erdogan H. Sarikaya R. Gao Y

In order to protect carbon steel of towers and piping of a GS experimental heavy water plant against corrosion produced by the action of aqueous solutions of hydrogen sulphide, a method, elsewhere published, was developed. Carbon steel exposed to saturate...

In order to protect carbon steel towers and piping of Girlder sulfide (G.S.) experimental heavy water plants against corrosion produced by the action of aqueous solutions of hydrogen sulfides, a method, previously published, was developed. Carbon steel, e...

The Atlas summarizes the experience of almost two decades of applied research in the siderurgical industry (IAS-CNEA joint agreements), by means of hot torsion test to evaluate the hot workability in steels through ductility properties and the formation s...

Within the framework of the development of low activation structural materials to be used in nuclear fusion reactors four martensitic Fe-9,5 Cr alloys were conceived with different contentsof tungsten-tantalum and/or germanium as substitutions for Mo, Ni,...

The main objective of the work was to determine the most common defects occuring in tool steels of the AISI D-2, S-1, 0-1 and W-2 series during thermal treatment. Defects were evaluated by metallographic analyses, a method used to determine and recognize ...

This is a theoretical-experimental laboratory study on the Electroslag Remelting Technology (ESRT) of high quality steels. The objective of this study was to analyze the problems that this technology entails and thus facilitate its industrial application ...

Maraging steel fabrication process metallurgy and cost effectiveness were investigated. Experimental melts were carried out in an induction furnace under argon atmosphere, and alternatively with vacuum remelting or direct induction melting under vacuum. A...

In this work, metallic coatings of nickel was made over carbon steel using two different electrolytic solutions: The Watts's bath and the nickel sulfamate bath, using a pulse variable current. The method use was the traditional method, its means a thermos...

The experimental study focused on the behavior of six different steels, of approximately 0.35% C and various contents of Cr, Ni, and Mo. Each of these steels were tested in order to determine its fatigue limit to 10 million cycles, in 5 different states (...

Telemetry Systems, Isanti, MN, USA; Holohil Systems, Carp, ON, Canada). All radios were attached ventrally-knobbed hornbill Aceros cassidix during the non-breeding season. � In: Poonswad, P. (ed.), The Asian hornbills

With this work it is demonstrated the possibility of performing the nitriding process by using a CVD-ECR source, based on the results obtained after treating several samples of AISI H-12 steel. Also, the main operating parameters (time of treatment, sampl...

The peak stress and the steady state values for free cutting, carbon and alloyed steels deformed at high temperatures were obtained in this paper as a result of two regressions. With these data and the peak deformation values obtained in a former work, st...

Phosphate coatings are inorganic crystalline deposits laid down uniformly on properly prepared surfaces by a chemical reaction with the treated base metal. The reaction consists in dissolving some surface metal by acid attack and then causing surface neut...

'anodo de carb'on, reaccionando con 'el y produciendo di'oxido de carbono (ver [8]). En los ' ultimos a aislantes. Contiene un c'atodo formado por un bloque de carb'on atravesado por una barra de acero en cuyo

Thin high-? oxide films on InAs, formed by atomic layer deposition, are the key to achieve high-speed metal-oxide-semiconductor devices. We have studied the native oxide and the interface between InAs and 2 nm thick Al2O3 or HfO2 layers using synchrotron x-ray photoemission spectroscopy. Both films lead to a strong oxide reduction, obtaining less than 10% of the native As-oxides and between 10% ...

It is well known that stable and efficient liquid-junction photovoltaic solar cells based on n-CuInSe/sub 2/ photoanodes can be obtained by coating the semiconductor surface with an indium-oxide layer and by employing an aqueous polyiodide solution containing Cu/sup +/, In/sup 3+/, and H/sup +/ ions. In this work, the authors further investigated the polycrystalline n-CuInSe/sub 2/-indium ...

This paper is part of a series which corresponds to the carbon steel behaviour as construction material for Girlder sulfide (G.S.) heavy water plants. The present work analyses the iron concentration study during passivation in the passivating fluid. At t...

In heavy water plants that use the bithermal exchange H(sub 2)S-H(sub 2)O, a protective scale against corrosion is formed by the action of a solution of H(sub 2)S at high temperature for a tile between 10 to 14 days. Exposure to humid air during plant shu...

In order to protect carbon steel towers and piping of a GS experimental heavy water plant against corrosion produced by the action of aqueous solutions of hydrogen sulphide, a method, elsewhere published, was developed. Carbon steel exposed to saturated a...

The passivation on carbon steels, in particular ASTM A 516 Degree 60 and ASTM A 333 steels is made, submitting it to the action of H(sub 2)S/H(sub 2)O(sup 1,2) corrosive medium. The steel is rapidly corroded by H(sub 2)S in aqueous solution, forming iron ...

In order to protect carbon steel towers and piping of Girlder sulfide (G.S.) experimental heavy water plants against corrosion produced by the action of aqueous solutions of hydrogen sulfide, a method, previously published, was developed. Carbon steel, ex...

An ASTM A 516 degree 60 carbon steel superficial protection technique submitted to a hydrogen-water sulfide corrosive medium at 2 MPa of pressure and 40-125 deg C forming on itself an iron sulfide layer was tested. Studies on pH influence, temperature, pa...

This work describes the assays aimed to passivate the steel carbon of the process pipings. This steel is marked by the ASTM A 333 G6 and is chemically similar to those of isotopic exchange towers which corrode in contact with in-water hydrogen sulfide sol...

de la meteorizaci�n de una balsa de residuos pir�ticos Patricia Acero Salazar #12;Estructura del proyecto Evoluci�n flujo y transporte reactivo en zona no saturada de balsas de residuos pir�ticos residuo (Tailings) Presa Capa agua anti-oxidaci�nEvaporaci�n O2 Tongadas sucesivas #12;O2 #12;Objetivos del

would require low B-field (magnetic field damping after ... VHE �-rays. H.E.S.S. prelim. HESS VHE excess map. XMM map (2-4.5 keV) smoothed to HESS PSF preliminary ... B&W map: ATCA 1.4 GHz. Tian et al., ApJ 2008. Color map: H.E.S.S. �-ray excess ... Matching increase in absorption derived from 12CO observations ...

The susceptibility of a 17-4PH type steel to Stress Corrosion Cracking (SCC) in low pressure steam turbine environments was assessed using slow strain rate test at 90 Centigrade and at 1.35x10(sup -6) seg(sup -1). Environments tested included different co...

The most common and plesiomorphic mechanism of food transport in tetrapods is lingual-based. Neognathous birds use this mechanism for exploiting a large diversity of food resources, whereas paleognathous birds use cranioinertial mechanism with or without tongue involvement. Food transport in three hornbills' species (Aceros cassidix, A. undulatus, and Buceros hydrocorax) is ...

Thin high-{kappa} oxide films on InAs, formed by atomic layer deposition, are the key to achieve high-speed metal-oxide-semiconductor devices. We have studied the native oxide and the interface between InAs and 2 nm thick Al{sub 2}O{sub 3} or HfO{sub 2} layers using synchrotron x-ray photoemission spectroscopy. Both films lead to a strong oxide reduction, obtaining less than 10% of the native ...

As complement to the experiences on carbon steel passivation for its use in G.S. (Girlder sulfide) heavy water production plants, the results herein obtained are given, processing the material with a saturated solution at 2.3 MPa of full pressure and 125 ...

Background. Heme oxygenase-1 (HMOX1) and bilirubin UDP-glucuronosyltransferase (UGT1A1), both enzymes involved in bilirubin homeostasis, play an important role inoxidative stress defense. Objective. To assess the effect of promotervariations of HMOX1 and UGT1A1 genes on the progression of fibrosis in patients chronically infected with the hepatitis C virus (HCV).
...

New developments with bainite have resulted in a steel with an ultimate tensile strength of 1.7-2.5 GPa and a toughness in excess of 30-40 MPa m1/2. The novel microstructure is generated in a high carbon high silicon steel isothermally transformed at temperatures of 200 C-350 C. Iron does not diffuse during the transformation to bainite at this low temperature. As a result, 20-40 nm thick plates ...

A liquid bridge is a mass of liquid sustained by the action of the surface tension force between two parallel supporting disks Apart from their basic scientific interest a liquid bridge can be considered as the simplest idealization of the configuration appearing in the floating zone technique used for crystal growth and purification of high melting point materials footnote Messeguer et al emph ...

Schwertmannite, an iron oxyhydroxide sulfate nanomineral, plays a significant role in the geochemistry of acid mine drainage (AMD) as a metastable phase with respect to goethite and by retaining toxic metals, e.g. arsenic [1]. Schwertmannite�s characteristic morphology is needles 100-300 nm long and only 5-10 nm in diameter extending from a dense aggregate. The poorly-and nano-crystalline nature ...

BackgroundAlthough nowaday it is broadly accepted that mitochondrial DNA (mtDNA) may undergo recombination, the frequency of such recombination remains controversial. Its estimation is not straightforward, as recombination under homoplasmy (i.e., among identical mt genomes) is likely to be overlooked. In species with tandem duplications of large mtDNA fragments the detection of recombination can ...

Abigail Alvarez OlarteCINVESTAV Alba Leticia Carrillo MonteverdeDCI-UG Alberto Carrami�anaINAOE Aldo MorselliFERMI Alejandro CastillaDCI-UG Alejandro IbarraTechnical University of Munich Alma D Rojas PachecoFCFM-BUAP Alma Xochitl Gonzalez MoralesInstituto de Ciencias Nucleares, UNAM Andrew Walcott BeckwithAmerican Institute of Beam Energy Physics Ariadna Montiel ArenasDepartamento de F�sica, ...