Significant Differences in Physicochemical Properties of Human Immunoglobulin Kappa and Lambda CDR3 Regions

PubMed Central

Townsend, Catherine L.; Laffy, Julie M. J.; Wu, Yu-Chang Bryan; Silva O’Hare, Joselli; Martin, Victoria; Kipling, David; Fraternali, Franca; Dunn-Walters, Deborah K.

2016-01-01

Antibody variable regions are composed of a heavy and a light chain, and in humans, there are two light chain isotypes: kappa and lambda. Despite their importance in receptor editing, the light chain is often overlooked in the antibody literature, with the focus being on the heavy chain complementarity-determining region (CDR)-H3 region. In this paper, we set out to investigate the physicochemical and structural differences between human kappa and lambda light chain CDR regions. We constructed a dataset containing over 29,000 light chain variable region sequences from IgM-transcribing, newly formed B cells isolated from human bone marrow and peripheral blood. We also used a published human naïve dataset to investigate the CDR-H3 properties of heavy chains paired with kappa and lambda light chains and probed the Protein Data Bank to investigate the structural differences between kappa and lambda antibody CDR regions. We found that kappa and lambda light chains have very different CDR physicochemical and structural properties, whereas the heavy chains with which they are paired do not differ significantly. We also observed that the mean CDR3 N nucleotide addition in the kappa, lambda, and heavy chain gene rearrangements are correlated within donors but can differ between donors. This indicates that terminal deoxynucleotidyl transferase may work with differing efficiencies between different people but the same efficiency in the different classes of immunoglobulin chain within one person. We have observed large differences in the physicochemical and structural properties of kappa and lambda light chain CDR regions. This may reflect different roles in the humoral immune response. PMID:27729912

[Expression of ATAD2 in different liver lesions and its clinical significance].

PubMed

Liu, F; Zhou, X; Ji, H H; Li, H; Xiang, F G

2017-05-20

Objective: To examine the expression of ATAD2 in different liver lesions and its clinical significance. Methods: ATAD2 expression in 60 hepatocellular carcinoma (HCC) surgical specimens (49 of which have concurrent liver cirrhosis), 43 HCC biopsy specimens, 2 high-grade liver dysplastic nodule specimens, 3 low-grade liver dysplastic nodule specimens, 50 liver cirrhosis tissue samples, and 20 normal liver tissue samples were measured using immunohistochemistry. The F-test, q-test, t-test, and chi-square test were used for statistical analysis of data. Results: ATAD2 was expressed in 56 HCC surgical specimens (93.33%), 35 HCC biopsy specimens (81.40%), and 2 high-grade liver dysplastic nodule specimens (2/2), but not in the low-grade liver dysplastic nodule, liver cirrhosis tissue, and normal liver tissue samples. The mean expression of ATAD2 was significantly higher in HCC tissues than in high-grade and low-grade liver dysplastic nodule tissues, liver cirrhosis tissue, and normal liver tissue ( F = 22.96, q = 3.138, 3.972, 12.272, and 9.101, respectively, all P < 0.01). There were no significant differences in the mean expression and positive expression rate of ATAD2 between HCC surgical and biopsy specimens ( t = 1.40, P > 0.05; χ ² = 3.47, P >0.05). Of the 35 HCC biopsy specimens that expressed ATAD2, the mean ATAD2 expression was ≥1% in 35 specimens (100%), ≥3% in 27 specimens (77.14%), and ≥5 % in 23 specimens (65.71%). In addition, among the pathological grade I-II HCC biopsy specimens, the mean ATAD2 expression was ≥1% in 28 specimens (100%), ≥3% in 22 specimens (62.86%), and ≥5% in 19 specimens (54.29%). Moreover, ATAD2 expression in HCC was associated with serum alpha-fetoprotein level, presence of hepatitis B virus surface antigen (HBsAg), and presence of concurrent liver cirrhosis ( t = 2.09, 2.30, and 2.18, respectively, all P < 0.05). Conclusion: ATAD2 may play an important role in HCC tumorigenesis, and may be involved in malignant

Significant differences in pediatric psychotropic side effects: Implications for school performance.

PubMed

Kubiszyn, Thomas; Mire, Sarah; Dutt, Sonia; Papathopoulos, Katina; Burridge, Andrea Backsheider

2012-03-01

Some side effects (SEs) of increasingly prescribed psychotropic medications can impact student performance in school. SE risk varies, even among drugs from the same class (e.g., antidepressants). Knowing which SEs occur significantly more often than others may enable school psychologists to enhance collaborative risk-benefit analysis, medication monitoring, data-based decision-making, and inform mitigation efforts. SE data from Full Prescribing Information (PI) on the FDA website for ADHD drugs, atypical antipsychotics, and antidepressants with pediatric indications were analyzed. Risk ratios (RR) are reported for each drug within a category compared with placebo. RR tables and graphs inform the reader about SE incidence differences for each drug and provide clear evidence of the wide variability in SE incidence in the FDA data. Breslow-Day and Cochran Mantel-Haenszel methods were used to test for drug-placebo SE differences and to test for significance across drugs within each category based on odds ratios (ORs). Significant drug-placebo differences were found for each drug compared with placebo, when odds were pooled across all drugs in a category compared with placebo, and between some drugs within categories. Unexpectedly, many large RR differences did not reach significance. Potential explanations are offered, including limitations of the FDA data sets and statistical and methodological issues. Future research directions are offered. The potential impact of certain SEs on school performance, mitigation strategies, and the potential role of the school psychologist is discussed, with consideration for ethical and legal limitations. (c) 2012 APA, all rights reserved.

Gluten-free dough-making of specialty breads: Significance of blended starches, flours and additives on dough behaviour.

PubMed

Collar, Concha; Conte, Paola; Fadda, Costantino; Piga, Antonio

2015-10-01

The capability of different gluten-free (GF) basic formulations made of flour (rice, amaranth and chickpea) and starch (corn and cassava) blends, to make machinable and viscoelastic GF-doughs in absence/presence of single hydrocolloids (guar gum, locust bean and psyllium fibre), proteins (milk and egg white) and surfactants (neutral, anionic and vegetable oil) have been investigated. Macroscopic (high deformation) and macromolecular (small deformation) mechanical, viscometric (gelatinization, pasting, gelling) and thermal (gelatinization, melting, retrogradation) approaches were performed on the different matrices in order to (a) identify similarities and differences in GF-doughs in terms of a small number of rheological and thermal analytical parameters according to the formulations and (b) to assess single and interactive effects of basic ingredients and additives on GF-dough performance to achieve GF-flat breads. Larger values for the static and dynamic mechanical characteristics and higher viscometric profiles during both cooking and cooling corresponded to doughs formulated with guar gum and Psyllium fibre added to rice flour/starch and rice flour/corn starch/chickpea flour, while surfactant- and protein-formulated GF-doughs added to rice flour/starch/amaranth flour based GF-doughs exhibited intermediate and lower values for the mechanical parameters and poorer viscometric profiles. In addition, additive-free formulations exhibited higher values for the temperature of both gelatinization and retrogradation and lower enthalpies for the thermal transitions. Single addition of 10% of either chickpea flour or amaranth flour to rice flour/starch blends provided a large GF-dough hardening effect in presence of corn starch and an intermediate effect in presence of cassava starch (chickpea), and an intermediate reinforcement of GF-dough regardless the source of starch (amaranth). At macromolecular level, both chickpea and amaranth flours, singly added, determined

Eye-hand preference in schizophrenia: sex differences and significance for hand function.

PubMed

Liu, Yi-Chia; Yang, Yen Kuang; Lee, I Hui; Lin, Keh-Chung; Jeffries, Keith J; Lee, Li-Ching

2004-06-01

Hand preference and eye dominance were investigated in 73 (30 women, 43 men) schizophrenic patients and 71 (30 women, 41 men) healthy controls. There were significantly more schizophrenic patients and normal controls who were significantly right-hand dominant. However, schizophrenic patients showed a significant excess of left-eye dominance relative to controls (65.8% vs 29.6%; Odds Ratio= 4.75, p< .001). In addition, female schizophrenic patients showed a higher rate of nonright (either left or inconsistent) eye dominance (80%) than male schizophrenic patients (55.8%) and controls (33.3%). Analysis of hand performance on the Purdue Pegboard Test indicated that schizophrenic patients who showed crossed eye-hand dominance scored higher than did patients without crossed eye-hand dominance.

Ceramics with Different Additives

NASA Astrophysics Data System (ADS)

Wang, Juanjuan; Feng, Lajun; Lei, Ali; Zhao, Kang; Yan, Aijun

2014-09-01

Li2CO3, MgCO3, BaCO3, and Bi2O3 dopants were introduced into CaCu3Ti4O12 (CCTO) ceramics in order to improve the dielectric properties. The CCTO ceramics were prepared by conventional solid-state reaction method. The phase structure, microstructure, and dielectric behavior were carefully investigated. The pure structure without any impurity phases can be confirmed by the x-ray diffraction patterns. Scanning Electron Microscopy (SEM) analysis illuminated that the grains of Ca0.90Li0.20Cu3Ti4O12 ceramics were greater than that of pure CCTO. It was important for the properties of the CCTO ceramics to study the additives in complex impedance spectroscopy. It was found that the Ca0.90Li0.20Cu3Ti4O12 ceramics had the higher permittivity (>45000), the lower dielectric loss (<0.025) than those of CCTO at 1 kHz at room temperature and good temperature stability from -30 to 75 °C.

Effects of addition of different fibers on rheological characteristics of cake batter and quality of cakes.

PubMed

Aydogdu, Ayca; Sumnu, Gulum; Sahin, Serpil

2018-02-01

The aim of this study was to investigate the effects of addition of dietary fibers on rheological properties of batter and cake quality. Wheat flour was replaced by 5 and 10% (wt%) oat, pea, apple and lemon fibers. All cake batters showed shear thinning behavior. Incorporation of fibers increased consistency index (k), storage modulus (G') and loss modulus (G″). As quality parameters, specific volume, hardness, weight loss, color and microstructure of cakes were investigated. Cakes containing oat and pea fibers (5%) had similar specific volume and texture with control cakes which contained no fiber. As fiber concentration increased, specific volume decreased but hardness increased. No significant difference was found between weight loss of control cake and cakes with oat, pea and apple fibers. Lemon fiber enriched cakes had the lowest specific volume, weight loss and color difference. When microstructural images were examined, it was seen that control cake had more porous structure than fiber enriched cakes. In addition, lemon and apple fiber containing cakes had less porous crumb structure as compared to oat and pea containing ones. Oat and pea fiber (5%) enriched cakes had similar physical properties (volume, texture and color) with control cakes.

No significant difference between chiari malformation type 1.5 and type I.

PubMed

Liu, Wei; Wu, Hongxing; Aikebaier, Yalikun; Wulabieke, Maoliti; Paerhati, Rexiti; Yang, Xiaopeng

2017-06-01

Chiari malformation Type 1.5 (CM 1.5) was defined as the association of Chiari malformation Type I (CM I) and brainstem herniation. The objective was to demonstrate the difference of clinical features and surgical outcomes between CM 1.5 and CM I. All CM 1.5 and CM I adult patients who underwent posterior fossa decompression with duraplasty at our institution between 2006 and 2010 were retrospectively reviewed. Clinical characteristics, imaging features, and long-term outcomes were compared between CM 1.5 and CM I patients. A total of 142 adult patients were enrolled, including 27 CM 1.5 and 115 CM I patients. The average follow-up period was 102 months. Age at diagnosis was significantly younger in CM 1.5 group than CM I group (p=0.039). And the degree of tonsillar herniation was significantly more severe in CM 1.5 group than CM I group (p<0.001). There was no significant difference in other clinical and imaging characteristics. Moreover, improvement of symptoms was observed in 21 CM 1.5 patients (77.8%) and 94 CM I patients (81.7%), and no significant difference was detected (p=0.637). There was no significant difference in the resolution of syringomyelia between CM 1.5 (72.7%) and CM I (76.5%) patients, either (p=0. 710). Although CM 1.5 patients presented with brainstem herniation and more severe tonsillar herniation, other clinical and imaging features and surgical outcomes were similar with CM I patients. We think CM 1.5 is just a subtype of CM I, rather than a unique type of Chiari malformations. Copyright © 2017 Elsevier B.V. All rights reserved.

TiO2 anode materials for lithium-ion batteries with different morphology and additives

NASA Astrophysics Data System (ADS)

Liu, Xiang; Ng, Yip Hang; Leung, Yu Hang; Liu, Fangzhou; Djurišic, Aleksandra B.; Xie, Mao Hai; Chan, Wai Kin

2014-03-01

Electrochemical performances of different TiO2 nanostructures, TiO2/CNT composite and TiO2 with titanium isopropoxide (TTIP) treatment anode were investigated. For different TiO2 nanostructures, we investigated vertically aligned TiO2 nanotubes on Ti foil and TiO2 nanotube-powders fabricated by rapid breakdown anodization technique. The morphology of the prepared samples was characterized by scanning probe microscopy (SEM). The electrochemical lithium storage abilities were studied by galvanostatic method. In addition, carbon nanotubes (CNT) additives and solution treatment process of TiO2 anode were investigated, and the results show that the additives and treatment could enhance the cycling performance of the TiO2 anode on lithium ion batteries.

Significant interarm blood pressure difference predicts cardiovascular risk in hypertensive patients

PubMed Central

Kim, Su-A; Kim, Jang Young; Park, Jeong Bae

2016-01-01

Abstract There has been a rising interest in interarm blood pressure difference (IAD), due to its relationship with peripheral arterial disease and its possible relationship with cardiovascular disease. This study aimed to characterize hypertensive patients with a significant IAD in relation to cardiovascular risk. A total of 3699 patients (mean age, 61 ± 11 years) were prospectively enrolled in the study. Blood pressure (BP) was measured simultaneously in both arms 3 times using an automated cuff-oscillometric device. IAD was defined as the absolute difference in averaged BPs between the left and right arm, and an IAD ≥ 10 mm Hg was considered to be significant. The Framingham risk score was used to calculate the 10-year cardiovascular risk. The mean systolic IAD (sIAD) was 4.3 ± 4.1 mm Hg, and 285 (7.7%) patients showed significant sIAD. Patients with significant sIAD showed larger body mass index (P < 0.001), greater systolic BP (P = 0.050), more coronary artery disease (relative risk = 1.356, P = 0.034), and more cerebrovascular disease (relative risk = 1.521, P = 0.072). The mean 10-year cardiovascular risk was 9.3 ± 7.7%. By multiple regression, sIAD was significantly but weakly correlated with the 10-year cardiovascular risk (β = 0.135, P = 0.008). Patients with significant sIAD showed a higher prevalence of coronary artery disease, as well as an increase in 10-year cardiovascular risk. Therefore, accurate measurements of sIAD may serve as a simple and cost-effective tool for predicting cardiovascular risk in clinical settings. PMID:27310982

Formation of macromolecules in wheat gluten/starch mixtures during twin-screw extrusion: effect of different additives.

PubMed

Wang, Kaiqiang; Li, Cheng; Wang, Bingzhi; Yang, Wen; Luo, Shuizhong; Zhao, Yanyan; Jiang, Shaotong; Mu, Dongdong; Zheng, Zhi

2017-12-01

Wheat gluten comprises a good quality and inexpensive vegetable protein with an ideal amino acid composition. To expand the potential application of wheat gluten in the food industry, the effect of different additives on the physicochemical and structural properties of wheat gluten/starch mixtures during twin-screw extrusion was investigated. Macromolecules were observed to form in wheat gluten/starch mixtures during twin-screw extrusion, which may be attributed to the formation of new disulfide bonds and non-covalent interactions, as well as Maillard reaction products. Additionally, the water retention capacity and in vitro protein digestibility of all extruded wheat gluten/starch products significantly increased, whereas the nitrogen solubility index and free sulfhydryl group (SH) content decreased, during twin-screw extrusion. Secondary structural analysis showed that α-helices disappeared with the concomitant increase of antiparallel β-sheets, demonstrating the occurrence of protein aggregation. Microstructures suggested that the irregular wheat gluten granular structure was disrupted, with additive addition favoring transformation into a more layered or fibrous structure during twin-screw extrusion. The findings of the present study demonstrate that extrusion might affect the texture and quality of extruded wheat gluten-based foods and suggest that this process might serve as a basis for the high-value application of wheat gluten products. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

[Prevention of NSAID gastropathy: the difference between a coxibs and the addition of a PPI].

PubMed

Lems, Willem F; Kuipers, Ernst J

2010-01-01

Several strategies are available for the prevention of NSAID gastropathy: the addition of misoprostol or proton pump inhibitors (PPIs) to conventional NSAIDs, or selective use of cyclo-oxygenase 2 inhibitors, the 'coxibs'. The recently published CONDOR study was a randomized trial comparing celecoxib with omeprazole in patients at high risk for NSAID gastropathy. A statistically significant reduction in the primary endpoint was found: hazard ratio: 4.3 (95% CI: 2.6-6.7; p < 0.0001). However, the reduction was largely based on a higher incidence of anaemia in the diclofenac plus omeprazole group. The study has strengths and weaknesses. The most important conclusion is that the nature of the gastro-protective effects of celecoxib and diclofenac/misoprostol are different.

Experimental procedure for measuring and comparing head-neck-trunk posture and movements caused by different progressive addition lens designs.

PubMed

Mateo, B; Porcar-Seder, R; Solaz, J S; Dürsteler, J C

2010-07-01

This study demonstrates that appropriate measurement procedures can detect differences in head movement in a near reading task when using three different progressive addition lenses (PALs). The movements were measured using an anatomical reference system with a biomechanical rationale. This reference system was capable of representing rotations for comparing head flexion relative to trunk, head flexion relative to neck, head rotation relative to trunk and trunk flexion. The subject sample comprised 31 volunteers and three PAL designs with different viewing zones were selected. Significant differences were found between the lenses for three of the seven movement parameters examined. The differences occurred for both vertical and horizontal head movements and could be attributed to aspects of the PAL design. The measurement of the complete kinematic trunk-neck-head chain improved the number of differences that were found over those in previous studies. STATEMENT OF RELEVANCE: The study proposes a methodology based on a biomechanical rationale able to differentiate head-neck-trunk posture and movements caused by different progressive addition lens designs with minimum invasiveness. This methodology could also be applied to analyse the ergonomics of other devices that restrict the user's field of view, such as helmets, personal protective equipment or helmet-mounted displays for pilots. This analysis will allow designers to optimise designs offering higher comfort and performance.

Hypoxia and inflammation indicate significant differences in the severity of obstructive sleep apnea within similar apnea-hypopnea index groups.

PubMed

Yilmaz Avci, Aynur; Avci, Suat; Lakadamyali, Huseyin; Can, Ufuk

2017-09-01

We determined whether hypoxia parameters are associated with C-reactive protein (CRP), mean platelet volume (MPV), white matter hyperintensity (WMH), and the severity of obstructive sleep apnea (OSA), and also evaluated whether hypoxia parameters, CRP, MPV, and WMH differ in patients with similar apnea-hypopnea index (AHI) scores. A total of 297 patients, who were evaluated using polysomnography, were assessed retrospectively. The measured hypoxia parameters included total sleep time with oxygen saturation <90% (ST 90 ), percentage of cumulative time with oxygen saturation <90% (CT 90 ), and lowest oxygen saturation (min SaO 2 ). The patients were divided into subgroups according to their CT 90 values, and patients with different AHI severities were divided into subgroups according to their ST 90 and min SaO 2 levels. Hypoxia parameters are associated with CRP, MPV, WMH, and the severity of OSA (P < 0.05). The hypoxia parameters differed in all subgroup analyses of similar AHI groups (P < 0.001), and CRP differed only in severe OSA (P < 0.008, P < 0.001). In subgroup analyses of similar AHI groups, MPV and WMH were not significantly different (P > 0.05). Above the hypoxia threshold (CT 90  ≥ 10%) of CRP, MPV increased significantly and the presence of WMH increased twofold. These data suggest that increased hypoxia severity may mediate increased inflammation and activation of platelets and contribute to the pathogenesis of WMH in patients with OSA. In addition, patients with severe OSA may show significant variability in inflammation and vascular risk. Further prospective data are needed.

[Clinical significance of Q-angle under different conditions in recurrent patellar dislocation].

PubMed

Wang, Zhijie; Chen, You; Li, Anping; Long, Yi

2014-01-01

To investigate the clinical significance of Q-angle measuring under different conditions in female recurrent patellar dislocation female patients. Between August 2012 and March 2013, 10 female patients (11 knees) with recurrent patellar dislocation were collected as trial group; 20 female patients (20 knees) with simple meniscus injury were collected as control group at the same time. Q-angle was measured in extension, 30 degrees flexion, 30 degrees flexion with manual correction, and surgical correction in the trial group, and only in extension and 30 degrees flexion in the control group. Then the difference value of Q-angle between extension and 30 degrees flexion (Q-angle in extension subtracts Q-angle in 30 flexion) were calculated. Independent sample t-test was used to analyze Q-angle degrees in extension, 30 degrees flexion, and the changed degrees of 2 groups. The Q-angle between manual correction and surgical correction of the trial group was analyzed by paired t-test. The Q-angle in extension, Q-angle in 30 degrees flexion, and difference value of Q-angle between extension and 30 degrees flexion were (17.2 +/- 3.6), (14.3 +/- 3.0), and (2.9 +/- 1.9) degrees in the trial group and were (15.2 +/- 3.4), (14.4 +/- 3.5), and (0.8 +/- 1.7) degrees in the control group. No significant difference was found in Q-angle of extension or Q-angle of 30 degrees flexion between 2 groups (P > 0.05), but the difference value of Q-angle between extension and 30 degrees flexion in the trial group was significantly larger than that in the control group (t = 3.253, P = 0.003). The Q-angle in 30 degrees flexion with manual correction and surgical correction in the trial group was (19.8 +/- 3.4) degrees and (18.9 +/- 3.8) degrees respectively, showing no significant difference (t = 2.193, P = 0.053). When a female patient's Q-angle in 30 degrees flexion knee changes obviously compared with Q-angle in extension position, recurrent patellar dislocation should be considered. For

On the Difference Between Additive and Subtractive QM/MM Calculations

PubMed Central

Cao, Lili; Ryde, Ulf

2018-01-01

The combined quantum mechanical (QM) and molecular mechanical (MM) approach (QM/MM) is a popular method to study reactions in biochemical macromolecules. Even if the general procedure of using QM for a small, but interesting part of the system and MM for the rest is common to all approaches, the details of the implementations vary extensively, especially the treatment of the interface between the two systems. For example, QM/MM can use either additive or subtractive schemes, of which the former is often said to be preferable, although the two schemes are often mixed up with mechanical and electrostatic embedding. In this article, we clarify the similarities and differences of the two approaches. We show that inherently, the two approaches should be identical and in practice require the same sets of parameters. However, the subtractive scheme provides an opportunity to correct errors introduced by the truncation of the QM system, i.e., the link atoms, but such corrections require additional MM parameters for the QM system. We describe and test three types of link-atom correction, viz. for van der Waals, electrostatic, and bonded interactions. The calculations show that electrostatic and bonded link-atom corrections often give rise to problems in the geometries and energies. The van der Waals link-atom corrections are quite small and give results similar to a pure additive QM/MM scheme. Therefore, both approaches can be recommended. PMID:29666794

On the difference between additive and subtractive QM/MM calculations

NASA Astrophysics Data System (ADS)

Cao, Lili; Ryde, Ulf

2018-04-01

The combined quantum mechanical (QM) and molecular mechanical (MM) approach (QM/MM) is a popular method to study reactions in biochemical macromolecules. Even if the general procedure of using QM for a small, but interesting part of the system and MM for the rest is common to all approaches, the details of the implementations vary extensively, especially the treatment of the interface between the two systems. For example, QM/MM can use either additive or subtractive schemes, of which the former is often said to be preferable, although the two schemes are often mixed up with mechanical and electrostatic embedding. In this article, we clarify the similarities and differences of the two approaches. We show that inherently, the two approaches should be identical and in practice require the same sets of parameters. However, the subtractive scheme provides an opportunity to correct errors introduced by the truncation of the QM system, i.e. the link atoms, but such corrections require additional MM parameters for the QM system. We describe and test three types of link-atom correction, viz. for van der Waals, electrostatic and bonded interactions. The calculations show that electrostatic and bonded link-atom corrections often give rise to problems in the geometries and energies. The van der Waals link-atom corrections are quite small and give results similar to a pure additive QM/MM scheme. Therefore, both approaches can be recommended.

Additional Guidance on Prevention of Significant Deterioration (PSD) Regulations

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Arabidopsis plants grown in the field and climate chambers significantly differ in leaf morphology and photosystem components

PubMed Central

2012-01-01

Background Plants exhibit phenotypic plasticity and respond to differences in environmental conditions by acclimation. We have systematically compared leaves of Arabidopsis thaliana plants grown in the field and under controlled low, normal and high light conditions in the laboratory to determine their most prominent phenotypic differences. Results Compared to plants grown under field conditions, the "indoor plants" had larger leaves, modified leaf shapes and longer petioles. Their pigment composition also significantly differed; indoor plants had reduced levels of xanthophyll pigments. In addition, Lhcb1 and Lhcb2 levels were up to three times higher in the indoor plants, but differences in the PSI antenna were much smaller, with only the low-abundance Lhca5 protein showing altered levels. Both isoforms of early-light-induced protein (ELIP) were absent in the indoor plants, and they had less non-photochemical quenching (NPQ). The field-grown plants had a high capacity to perform state transitions. Plants lacking ELIPs did not have reduced growth or seed set rates, but their mortality rates were sometimes higher. NPQ levels between natural accessions grown under different conditions were not correlated. Conclusion Our results indicate that comparative analysis of field-grown plants with those grown under artificial conditions is important for a full understanding of plant plasticity and adaptation. PMID:22236032

Conventions of Courtship: Gender and Race Differences in the Significance of Dating Rituals

PubMed Central

Jackson, Pamela Braboy; Kleiner, Sibyl; Geist, Claudia; Cebulko, Kara

2012-01-01

Dating rituals include dating-courtship methods that are regularly enacted. We explored gender and race differences in the relative importance placed on certain symbolic activities previously identified by the dating literature as constituting such rituals. Using information collected from a racially diverse sample of college students (N = 680), we find that some traditional gender differences persist, but that these are also cross-cut by racial contrasts. Men, overall, place more emphasis on gifting, as well as sexual activity. Gender differences, however, are significantly greater among African Americans1 as compared to Whites in our sample. African American respondents are also significantly more likely than White respondents to associate meeting the family with a more serious dating relationship. Our findings highlight the need for greater efforts to uncover and account for racial differences in dating, relationships, and courtship. PMID:23049154

Comparison of Far-Field Noise for Three Significantly Different Model Turbofans

NASA Technical Reports Server (NTRS)

Woodward, Richard P.

2008-01-01

Far-field noise sound power level (PWL) spectra and overall sound pressure level (OASPL) directivities were compared for three significantly different model fan stages which were tested in the NASA Glenn 9x15 Low Speed Wind Tunnel. The test fans included the Advanced Ducted Propulsor (ADP) Fan1, the baseline Source Diagnostic Test (SDT) fan, and the Quiet High Speed Fan2 (QHSF2) These fans had design rotor tangential tip speeds from 840 to 1474 ft/s and stage pressure ratios from 1.29 to 1.82. Additional parameters included rotor-stator spacing, stator sweep, and downstream support struts. Acoustic comparison points were selected on the basis of stage thrust. Acoustic results for the low tip speed/low pressure ratio fan (ADP Fan1) were thrust-adjusted to show how a geometrically-scaled version of this fan might compare at the higher design thrust levels of the other two fans. Lowest noise levels were typically observed for ADP Fan1 (which had a radial stator) and for the intermediate tip speed fan (Source Diagnostics Test, SDT, R4 rotor) with a swept stator. Projected noise levels for the ADP fan to the SDT swept stator configuration at design point conditions showed the fans to have similar noise levels. However, it is possible that the ADP fan could be 2 to 3 dB quieter with incorporation of a swept stator. Benefits of a scaled ADP fan include avoidance of multiple pure tones associated with transonic and higher blade tip speeds. Penalties of a larger size ADP fan would include increased nacelle size and drag.

Comparison of Far-field Noise for Three Significantly Different Model Turbofans

NASA Technical Reports Server (NTRS)

Woodward, Richard P.

2008-01-01

Far-field noise sound power level (PWL) spectra and overall sound pressure level (OASPL) directivities were compared for three significantly different model fan stages which were tested in the NASA Glenn 9 15 Low Speed Wind Tunnel. The test fans included the Advanced Ducted Propulsor (ADP) Fan1, the baseline Source Diagnostic Test (SDT) fan, and the Quiet High Speed Fan2 (QHSF2). These fans had design rotor tangential tip speeds from 840 to 1474 ft/s and stage pressure ratios from 1.29 to 1.82. Additional parameters included rotor-stator spacing, stator sweep, and downstream support struts. Acoustic comparison points were selected on the basis of stage thrust. Acoustic results for the low tip speed/low pressure ratio fan (ADP Fan1) were thrust-adjusted to show how a geometrically-scaled version of this fan might compare at the higher design thrust levels of the other two fans. Lowest noise levels were typically observed for ADP Fan1 (which had a radial stator) and for the intermediate tip speed fan (Source Diagnostics Test, SDT, R4 rotor) with a swept stator. Projected noise levels for the ADP fan to the SDT swept stator configuration at design point conditions showed the fans to have similar noise levels. However, it is possible that the ADP fan could be 2 to 3 dB quieter with incorporation of a swept stator. Benefits of a scaled ADP fan include avoidance of multiple pure tones associated with transonic and higher blade tip speeds. Penalties of a larger size ADP fan would include increased nacelle size and drag.

Different Volumetric Measurement Methods for Pituitary Adenomas and Their Crucial Clinical Significance

PubMed Central

Chuang, Chi-Cheng; Lin, Shinn-Yn; Pai, Ping-Ching; Yan, Jiun-Lin; Toh, Cheng-Hong; Lee, Shih-Tseng; Wei, Kuo-Chen; Liu, Zhuo-Hao; Chen, Chung-Ming; Wang, Yu-Chi; Lee, Cheng-Chi

2017-01-01

Confirming the status of residual tumors is crucial. In stationary or spontaneous regression cases, early treatments are inappropriate. The long-used geometric calculation formula is 1/2 (length × width × height). However, it yields only rough estimates and is particularly unreliable for irregularly shaped masses. In our study, we attempted to propose a more accurate method. Between 2004 and 2014, 94 patients with pituitary tumors were enrolled in this retrospective study. All patients underwent transsphenoidal surgery and received magnetic resonance imaging (MRI). The pre- and postoperative volumes calculated using the traditional formula were termed A1 and A2, and those calculated using the proposed method were termed O1 and O2, respectively. Wilcoxon signed rank test revealed no significant difference between the A1 and O1 groups (P = 0.1810) but a significant difference between the A2 and O2 groups (P < 0.0001). Significant differences were present in the extent of resection (P < 0.0001), high-grade cavernous sinus invasion (P = 0.0312), and irregular shape (P = 0.0116). Volume is crucial in evaluating tumor status and determining treatment. Therefore, a more scientific method is especially useful when lesions are irregularly shaped or when treatment is determined exclusively based on the tumor volume. PMID:28098212

Effect of different additives on the persistence and insecticidal activity of native strains of Bacillus thuringiensis.

PubMed

Singh, A; Boora, K S; Chaudhary, K

2007-03-01

The persistence and insecticidal activity of native strains of Bacillus thuringiensis was evaluated in formulations containing different additives such as arrow-root powder, carboxy methyl cellulose (CMC), gum acacia, non-food grade (NFG) starch, and soluble starch. Persistence of B. thuringiensis varied with different additives used in the formulations. Among the different additives used, NFG starch provided maximum protection to B. thuringiensis and native strain 42 showed maximum persistence (83%) which was higher than that obtained in commercial formulation. In commercial formulation, the persistence of B. thuringiensis was 47% only after 3 d of spray. The feeding trials conducted on second instar larvae of H. armigera using leaves sprayed with NFG starch formulation revealed 70% larval mortality while commercial formulation showed 50% mortality during the same period.

Nuisance or Not? Part 2 "Wood" New Additives Make a Difference?

NASA Astrophysics Data System (ADS)

Vilardi, J. R.

2017-12-01

Nuisance or Not? Part 2"Wood" New Additives Make a Difference? Julian Vilardi Wetumpka Middle School, Wetumpka, USA Last year fuel briquettes were created out of nuisance organisms. Several samples had results better or comparable to the controls. This project is a revision/ extension. Purpose: Find process and formula for a long lasting environmentally friendly biofuel that produces high energy with low byproducts and low cost. Hypotheses: If wisteria is processed to make a biofuel that contains 90% wisteria leaves and vines and 10% pine cones, then a high energy, low byproduct, biofuel will be created. Procedure: Collect, dry and chop material, compress mass, burn test, repeat for every organism. Kudzu was combined in a 70 % kudzu: 30 % wood additive with used cooking oil and pressed into logs. Logs were massed, burned and temperature was recorded and compared to controls. Results: Kudzu had the longest flame but produced smoke. Kudzu logs with recycled cooking oil had less smoke and burned for an hour plus. Conclusions: Wisteria did not compact or have great flammability. Pine cones did not flame well either. This hypothesis was unsupported. All kudzu samples when compacted and combined with any additive were the best biofuel. Kudzu logs with the mixture of wood additives burned the longest and was one of the hottest. The gas chromatograph/emissions tests showed the organic byproducts produced on burning the kudzu logs were less than the accepted range for air quality. These supported the hypothesis and met the purpose of this project. A low cost, environmentally friendly, efficient fuel source was created!

Rapid Quantification of Melamine in Different Brands/Types of Milk Powders Using Standard Addition Net Analyte Signal and Near-Infrared Spectroscopy

PubMed Central

2016-01-01

Multivariate calibration (MVC) and near-infrared (NIR) spectroscopy have demonstrated potential for rapid analysis of melamine in various dairy products. However, the practical application of ordinary MVC can be largely restricted because the prediction of a new sample from an uncalibrated batch would be subject to a significant bias due to matrix effect. In this study, the feasibility of using NIR spectroscopy and the standard addition (SA) net analyte signal (NAS) method (SANAS) for rapid quantification of melamine in different brands/types of milk powders was investigated. In SANAS, the NAS vector of melamine in an unknown sample as well as in a series of samples added with melamine standards was calculated and then the Euclidean norms of series standards were used to build a straightforward univariate regression model. The analysis results of 10 different brands/types of milk powders with melamine levels 0~0.12% (w/w) indicate that SANAS obtained accurate results with the root mean squared error of prediction (RMSEP) values ranging from 0.0012 to 0.0029. An additional advantage of NAS is to visualize and control the possible unwanted variations during standard addition. The proposed method will provide a practically useful tool for rapid and nondestructive quantification of melamine in different brands/types of milk powders. PMID:27525154

Septic tank additive impacts on microbial populations.

PubMed

Pradhan, S; Hoover, M T; Clark, G H; Gumpertz, M; Wollum, A G; Cobb, C; Strock, J

2008-01-01

Environmental health specialists, other onsite wastewater professionals, scientists, and homeowners have questioned the effectiveness of septic tank additives. This paper describes an independent, third-party, field scale, research study of the effects of three liquid bacterial septic tank additives and a control (no additive) on septic tank microbial populations. Microbial populations were measured quarterly in a field study for 12 months in 48 full-size, functioning septic tanks. Bacterial populations in the 48 septic tanks were statistically analyzed with a mixed linear model. Additive effects were assessed for three septic tank maintenance levels (low, intermediate, and high). Dunnett's t-test for tank bacteria (alpha = .05) indicated that none of the treatments were significantly different, overall, from the control at the statistical level tested. In addition, the additives had no significant effects on septic tank bacterial populations at any of the septic tank maintenance levels. Additional controlled, field-based research iswarranted, however, to address additional additives and experimental conditions.

Effect of different antioxidant additives in semen diluent on cryopreservability (-196°C) of buffalo semen.

PubMed

Patel, Hardik A; Siddiquee, G M; Chaudhari, Dinesh V; Suthar, Vishal S

2016-03-01

The aim of this study was to evaluate the effect of different antioxidant additives in standard tris-fructose-egg yolk-glycerol (TFYG) extender on the cryopreservability of buffalo semen. Semen collection using artificial vagina, twice weekly for 5 weeks from three pedigreed health breeding bulls of Mehsani breed, aged between 6 and 8 years. Immediately after initial evaluation all 30 qualifying ejaculates (10/bull) were split into three aliquots and diluted at 34°C keeping the concentration of 100 million spermatozoa/ml with standard TFYG extender as control and TFYG having two antioxidant additives - Cysteine HCl at 1 mg/ml and ascorbic acid at 0.2 mg/ml to study their comparative performance. Semen filled in French Mini straws using IS-4 system and gradually cooled to 4°C and equilibrated for 4 h in cold handing cabinet. After completion of equilibration, straws were cryopreserved in LN2 by Programmable Bio-freezer. Semen was examined at post-dilution, post-equilibration, and post-thaw stages for sperm quality parameters, and at each stage plasma was separated for enzymatic analysis of aspartate aminotransferase (AST), lactate dehydrogenase (LDH), and alkaline phosphatase (AKP). The mean percentage of sperms in TFYG, TFYG + cysteine HCl and TFYG + ascorbic acid diluents at post-thaw stage in terms of progressive motility (52.83±0.52, 57.83±0.52, 57.83±0.52), livability (78.70±0.21, 82.33±0.23, 81.73±0.22), and abnormality (5.43±0.21, 5.03±0.17, 5.23±0.18) varied significantly (p<0.05) between control TFYG and TFYG having antioxidant additives. The mean U/L activities of AST (78.70±0.47, 72.80±0.48, 73.30±0.54), LDH (172.70±0.41, 155.78±0.42, 156.33±0.41), and AKP (103.61±0.34, 90.20±0.34, 91.03±0.34) in semen diluted with TFYG, TFYG + cysteine HCl and TFYG + ascorbic acid diluents at post-thaw stage, respectively, which showed significantly (p<0.05) higher leakage of enzymes in control TFYG than TFYG incorporated with additives. Incorporation

Composite Gypsum Binders with Silica-containing Additives

NASA Astrophysics Data System (ADS)

Chernysheva, N. V.; Lesovik, V. S.; Drebezgova, M. Yu; Shatalova, S. V.; Alaskhanov, A. H.

2018-03-01

New types of fine mineral additives are proposed for designing water-resistant Composite Gypsum Binders (CGB); these additives significantly differ from traditional quartz feed: wastes from wet magnetic separation of Banded Iron Formation (BIF WMS waste), nanodispersed silica powder (NSP), chalk. Possibility of their combined use has been studied as well.

Significant differences in ion and electron guiding through highly insulating capillaries

NASA Astrophysics Data System (ADS)

Stolterfoht, N.; Tanis, J.

2018-04-01

Outstanding phenomena of capillary guiding are discussed in accordance with a recent review in the field. Experiments concerning highly charged ions of a few keV energy guided through insulating nanocapillaries are shown. Studies of the temporal evolution of ion transmission are presented. Attention is focused on oscillatory structures in the ion emission and the independence of the ion guiding on the beam intensity. A few experiments of electron guiding are presented showing a significantly different temporal evolution of the transmitted intensity. The onset of the electron transmission is very sudden accompanied by a considerable energy loss within the capillary. To achieve more insight into the different guiding mechanisms, theoretical aspects of the capillary guiding are analyzed. A scenario is offered to explain the abrupt rise of transmitted electrons. Altogether, these studies show that ion and electron guiding are accomplished through different manifestations of the charge build up that underlies both.

In Vitro Bioaccessibility of Colored Carotenoids in Tomato Derivatives as Affected by Ripeness Stage and the Addition of Different Types of Oil.

PubMed

González-Casado, Sandra; Martín-Belloso, Olga; Elez-Martínez, Pedro; Soliva-Fortuny, Robert

2018-05-01

The simultaneous effect of tomato ripeness stage (mature green, pink, and red-ripe), mechanical processing (dicing and grinding), and oil addition (coconut, sunflower, and olive oils) on the amount and bioaccessible fraction of carotenoids were evaluated. Tomato products obtained from fruits at the most advanced ripeness stage exhibited the greatest values of both concentration and bioaccessible fraction of total carotenoids and lycopene. The type of processing also exerted an important influence on carotenoids content, as well as on its bioaccessibility. Thus, despite the concentration of carotenoids in tomato puree significantly decreased (36% to 59%), their bioaccessibility was greater (up to 2.54-fold increase) than in tomato cubes. Moreover, the addition of oil significantly improved the carotenoid bioaccessibility, especially when olive oil was added, reaching up to 21-fold increase with respect to samples without oil. The results obtained clearly indicate that carotenoids bioaccessibility of tomato derivatives was strongly influenced by the ripeness stage of the fruit, processing and the addition of oil. Bioaccessibility of carotenoids is known to be affected by different factors. This study provides useful information about the synergic effect of different factors affecting the amount and the bioaccessible fraction of carotenoids, especially lycopene, in two common tomato derivatives. The findings of this work may contribute to develop tomato derivatives with high content of bioaccessible carotenoids, leading to the enhancement of their health-promoting properties. © 2018 Institute of Food Technologists®.

Oral challenges with four apple cultivars result in significant differences in oral allergy symptoms.

PubMed

Nybom, Hilde; Cervin-Hoberg, Charlotte; Andersson, Morgan

2013-01-01

We analyzed the hypoallergenic potential of a recently bred apple selection with unusually low content of Mal d 1, using an oral challenge model with three additional apple cultivars for comparison. Sixty-six birch pollen-allergic individuals with a history of oral allergy syndrome after apple intake were subjected to a double-blind oral provocation with two apple cultivars (B:0654 and 'Discovery'). Thirteen also tested two other apple cultivars ('Ingrid Marie' and 'Gloster'). Three doses were given consecutively, 30 min apart: 10 g without peel, and 10 and 50 g with peel. A final assessment was conducted 30 min after the last intake. Oral symptoms were graded from 0 to 5. Total oral symptom score (TOS) included all scores for each cultivar at all time points. B:0654 induced significantly higher TOS than 'Discovery' when tested by 66 individuals, in spite of its lower Mal d 1 content. TOS values were higher in females and increased with increasing age of the individuals when challenged with 'Discovery'. Among the 13 individuals who tested all four cultivars, B:0654 produced a higher score after the second dose compared to 'Ingrid Marie'. This was also the case after the third dose compared to 'Ingrid Marie' and 'Gloster', and again 30 min after the last intake compared to each of the other three cultivars, as well as a higher TOS compared to each of the other three cultivars (all p < 0.01). Our test was safe and well tolerated, and produced significant differences among the apple cultivars. Contrary to expectations, B:0654 was less well tolerated than the other three cultivars. Copyright © 2013 S. Karger AG, Basel.

Fortification of yogurts with different antioxidant preservatives: A comparative study between natural and synthetic additives.

PubMed

Caleja, Cristina; Barros, Lillian; Antonio, Amilcar L; Carocho, Márcio; Oliveira, M Beatriz P P; Ferreira, Isabel C F R

2016-11-01

Consumers demand more and more so-called "natural" products and, therefore, the aim of this work was to compare the effects of natural versus synthetic antioxidant preservatives in yogurts. Matricaria recutita L. (chamomile) and Foeniculum vulgare Mill. (fennel) decoctions were tested as natural additives, while potassium sorbate (E202) was used as a synthetic additive. The fortification of yogurts with natural and synthetic antioxidants did not cause significant changes in the yoghurt pH and nutritional value, in comparison with control samples (yogurt without any additive). However, the fortified yogurts showed higher antioxidant activity, mainly the yogurts with natural additives (and among these, the ones with chamomile decoction). Overall, it can be concluded that plant decoctions can be used to develop novel yogurts, by replacing synthetic preservatives and improving the antioxidant properties of the final product, without changing the nutritional profile. Copyright © 2016 Elsevier Ltd. All rights reserved.

Illness perceptions in the context of differing work participation outcomes: exploring the influence of significant others in persistent back pain

PubMed Central

2013-01-01

Background Previous research has demonstrated that the significant others of individuals with persistent back pain may have important influences on work participation outcomes. The aim of this study was to extend previous research by including individuals who have remained in work despite persistent back pain in addition to those who had become incapacitated for work, along with their significant others. The purpose of this research was to explore whether the illness beliefs of significant others differed depending on their relative’s working status, and to make some preliminary identification of how significant others may facilitate or hinder work participation for those with persistent back pain. Methods Interviews structured around the Illness Perception Questionnaire (chronic pain version) were conducted with back pain patients recruited from a hospital pain management clinic along with their significant others. Some patients had remained in work despite their back pain; others had ceased employment. Data were analysed using template analysis. Results There were clear differences between beliefs about, and reported responses to, back pain symptoms amongst the significant others of individuals who had remained in employment compared with the significant others of those who had ceased work. Three overarching themes emerged: perceived consequences of back pain, specific nature of employment and the impact of back pain on patient identity. Conclusions Significant others of employed individuals with back pain focused on the extent to which activity could still be undertaken despite back pain symptoms. Individuals out of work due to persistent back pain apparently self-limited their activity and were supported in their beliefs and behaviours by their significant others. To justify incapacity due to back pain, this group had seemingly become entrenched in a position whereby it was crucial that the individual with back pain was perceived as completely disabled. We

Evaluation of Different Power of Near Addition in Two Different Multifocal Intraocular Lenses

PubMed Central

Unsal, Ugur; Baser, Gonen

2016-01-01

Purpose. To compare near, intermediate, and distance vision and quality of vision, when refractive rotational multifocal intraocular lenses with 3.0 diopters or diffractive multifocal intraocular lenses with 2.5 diopters near addition are implanted. Methods. 41 eyes of 41 patients in whom rotational +3.0 diopters near addition IOLs were implanted and 30 eyes of 30 patients in whom diffractive +2.5 diopters near addition IOLs were implanted after cataract surgery were reviewed. Uncorrected and corrected distance visual acuity, intermediate visual acuity, near visual acuity, and patient satisfaction were evaluated 6 months later. Results. The corrected and uncorrected distance visual acuity were the same between both groups (p = 0.50 and p = 0.509, resp.). The uncorrected intermediate and corrected intermediate and near vision acuities were better in the +2.5 near vision added intraocular lens implanted group (p = 0.049, p = 0.005, and p = 0.001, resp.) and the uncorrected near vision acuity was better in the +3.0 near vision added intraocular lens implanted group (p = 0.001). The patient satisfactions of both groups were similar. Conclusion. The +2.5 diopters near addition could be a better choice in younger patients with more distance and intermediate visual requirements (driving, outdoor activities), whereas the + 3.0 diopters should be considered for patients with more near vision correction (reading). PMID:27340560

Evaluation of the BD Vacutainer(®) RST blood collection tube for routine chemistry analytes: clinical significance of differences and stability study.

PubMed

Kocijancic, Marija; Cargonja, Jelena; Delic-Knezevic, Alma

2014-01-01

Preanalytical variables account for most of laboratory errors. There is a wide range of factors that affect the reliability of laboratory report. Most convenient sample type for routine laboratory analysis is serum. BD Vacutainer(®) Rapid Serum Tube (RST) (Becton, Dickinson and Company, Franklin Lakes, NJ, USA) blood collection tube provides rapid clotting time allowing fast serum separation. Our aim was to evaluate the comparability of routine chemistry parameters in BD Vacutainer(®) RST blood collection tube in reference with the BD Vacutainer(®) Serum Separating Tubes II Advance Tube (SST) (Becton, Dickinson and Company, Franklin Lakes, NJ, USA). Blood specimens were collected from 90 participants for evaluation on its results, clotting time and stability study of six routine biochemistry parameters: glucose (Glu), aspartate aminotransferase (AST), alanine aminotransferase (ALT), calcium (Ca), lactate dehidrogenase (LD) and potassium (K) measured with Olympus AU2700 analyzer (Beckman Coulter, Tokyo, Japan). The significance of the differences between samples was assessed by paired t-test or Wilcoxon Matched-Pairs Rank test after checking for normality. Clotting process was significantly shorter in the RSTs compared to SSTs (2.49 min vs. 19.47 min, respectively; P < 0.001). There was a statistically significant difference between the RST and SST II tubes for glucose, calcium and LD (P < 0.001). Differences for glucose and LD were also clinically significant. Analyte stability studies showed that all analytes were stable for 24 h at 4 °C. Most results (except LD and glucose) from RST are comparable with those from SST. In addition, RST tube provides shorter clotting time.

Whole-genome scan reveals significant non-additive effects for sire conception rate in Holstein cattle.

PubMed

Nicolini, Paula; Amorín, Rocío; Han, Yi; Peñagaricano, Francisco

2018-02-27

Service sire has a considerable impact on reproductive success in dairy cattle. Most gene mapping studies for bull fertility have focused on additive effects, while non-additive effects have been largely ignored. The main goal of this study was to assess the relevance of non-additive effects on Sire Conception Rate (SCR) in Holstein dairy cattle. The analysis included 7.5 k Holstein bulls with both SCR records and 57.8 k single nucleotide polymorphism (SNP) markers spanning the entire genome. The importance of non-additive effects was evaluated using an efficient two-step mixed model-based approach. Four genomic regions located on chromosomes BTA8, BTA9, BTA13 and BTA17 showed marked dominance and/or recessive effects. Most of these regions harbor genes, such as ADAM28, DNAJA1, TBC1D20, SPO11, PIWIL3 and TMEM119, that are directly implicated in testis development, male germ line maintenance, and sperm maturation. This study provides further evidence for the relevance of non-additive effects in fitness-related traits, such as male fertility. In addition, these findings may point out new strategies for improving service sire fertility in dairy cattle via marker-assisted selection.

Lubricant and additive effects on spur gear fatigue life

NASA Technical Reports Server (NTRS)

Townsend, D. P.; Zaretsky, E. V.; Scibbe, H. W.

1985-01-01

Spur gear endurance tests were conducted with six lubricants using a single lot of consumable-electrode vacuum melted (CVM) AISI 9310 spur gears. The sixth lubricant was divided into four batches each of which had a different additive content. Lubricants tested with a phosphorus-type load carrying additive showed a statistically significant improvement in life over lubricants without this type of additive. The presence of sulfur type antiwear additives in the lubricant did not appear to affect the surface fatigue life of the gears. No statistical difference in life was produced with those lubricants of different base stocks but with similar viscosity, pressure-viscosity coefficients and antiwear additives. Gears tested with a 0.1 wt % sulfur and 0.1 wt % phosphorus EP additives in the lubricant had reactive films that were 200 to 400 (0.8 to 1.6 microns) thick.

In vitro bonding effectiveness of three different one-step self-etch adhesives with additional enamel etching.

PubMed

Batra, Charu; Nagpal, Rajni; Tyagi, Shashi Prabha; Singh, Udai Pratap; Manuja, Naveen

2014-08-01

To evaluate the effect of additional enamel etching on the shear bond strength of three self-etch adhesives. Class II box type cavities were made on extracted human molars. Teeth were randomly divided into one control group of etch and rinse adhesive and three test groups of self-etch adhesives (Clearfil S3 Bond, Futurabond NR, Xeno V). The teeth in the control group (n = 10) were treated with Adper™ Single Bond 2. The three test groups were further divided into two subgroups (n = 10): (i) self-etch adhesive was applied as per the manufacturer's instructions; (ii) additional etching of enamel surfaces was done prior to the application of self-etch adhesives. All cavities were restored with Filtek Z250. After thermocycling, shear bond strength was evaluated using a Universal testing machine. Data were analyzed using anova independent sample's 't' test and Dunnett's test. The failure modes were evaluated with a stereomicroscope at a magnification of 10×. Additional phosphoric acid etching of the enamel surface prior to the application of the adhesive system significantly increased the shear bond strength of all the examined self-etch adhesives. Additional phosphoric acid etching of enamel surface significantly improved the shear bond strength. © 2013 Wiley Publishing Asia Pty Ltd.

Additive effects of plant sterols supplementation in addition to different lipid-lowering regimens.

PubMed

Malina, Daniela M T; Fonseca, Francisco A; Barbosa, Sílvio A; Kasmas, Soraia H; Machado, Valéria A; França, Carolina N; Borges, Ney C; Moreno, Ronilson A; Izar, Maria C

2015-01-01

Plant sterol (PS) supplementation has been widely used alone or combined with lipid-lowering therapies (LLTs) to reduce low-density lipoprotein (LDL) cholesterol. The effects of PS added to high-intensity LLT are less reported, especially regarding the effects on cholesterol synthesis and absorption. A prospective, randomized, open-label study, with parallel arms and blinded end points was designed to evaluate the effects of addition of PS to LLT on LDL cholesterol, markers of cholesterol synthesis, and absorption. Eighty-six patients of both genders were submitted to a 4-wk run-in period with atorvastatin 10 mg (baseline). Following, subjects received atorvastatin 40 mg, ezetimibe 10 mg, or combination of both drugs for another 4-wk period (phase I). In phase II, capsules containing 2.0 g of PSs were added to previous assigned treatments for 4 wk. Lipids, apolipoproteins, plasma campesterol, β-sitosterol, and desmosterol levels were assayed at all time points. Within and between-group analyses were performed. Compared with baseline, atorvastatin 40 mg reduced total and LDL cholesterol (3% and 22%, respectively, P < .05), increased β-sitosterol, campesterol/cholesterol, and β-sitosterol/cholesterol ratios (39%, 47%, and 32%, respectively, P < .05); ezetimibe 10 mg reduced campesterol and campesterol/cholesterol ratio (67% and 70%, respectively, P < .05), and the combined therapy decreased total and LDL cholesterol (22% and 38%, respectively, P < .05), campesterol, β-sitosterol, and campesterol/cholesterol ratio (54%, 40%, and 27%, P < .05). Addition of PS further reduced total and LDL cholesterol by ∼ 7.7 and 6.5%, respectively, in the atorvastatin therapy group and 5.0 and 4.0% in the combined therapy group (P < .05, for all), with no further effects in absorption or synthesis markers. PS added to LLT can further improve lipid profile, without additional effects on intestinal sterol absorption or synthesis. Copyright © 2015 National Lipid Association

Biographical Narratives of Encounter: The Significance of Mobility and Emplacement in Shaping Attitudes towards Difference

PubMed Central

Sadgrove, Joanna

2014-01-01

This paper is located within work in urban studies about the significance of contact with difference as a means for reducing prejudice and achieving social change. Recent approaches, influenced by theories of affect, have emphasised non-conscious everyday negotiations of difference in the city. In this paper it is argued that such approaches lose sight of the significance of the subject: of the reflective judgements of ‘others’ made by individuals; of our ability to make decisions around the control of our feelings and identifications; and of the significance of personal pasts and collective histories in shaping the ways we perceive and react to encounters. Rather, this paper uses a biographical approach focusing on interviewees’ narratives of encounter. Through its attention to processes of mobility and emplacement, it contributes to debates about when contact with difference matters by highlighting the importance of everyday social normativities in the production of moral dispositions. PMID:26300566

Mechanical and Electrical Properties of a Polyimide Film Significantly Enhanced by the Addition of Single-Wall Carbon Nanotubes

NASA Technical Reports Server (NTRS)

Meador, Michael A.

2005-01-01

Single-wall carbon nanotubes have been shown to possess a combination of outstanding mechanical, electrical, and thermal properties. The use of carbon nanotubes as an additive to improve the mechanical properties of polymers and/or enhance their thermal and electrical conductivity has been a topic of intense interest. Nanotube-modified polymeric materials could find a variety of applications in NASA missions including large-area antennas, solar arrays, and solar sails; radiation shielding materials for vehicles, habitats, and extravehicular activity suits; and multifunctional materials for vehicle structures and habitats. Use of these revolutionary materials could reduce vehicle weight significantly and improve vehicle performance and capabilities.

Significant difference in the dynamics between strong and fragile glass formers.

PubMed

Furukawa, Akira; Tanaka, Hajime

2016-11-01

Glass-forming liquids are often classified into strong glass formers with nearly Arrhenius behavior and fragile ones with super-Arrhenius behavior. We reveal a significant difference in the dynamics between these two types of glass formers through molecular dynamics simulations: In strong glass formers, the relaxation dynamics of density fluctuations is nondiffusive, whereas in fragile glass formers it exhibits diffusive behavior. We demonstrate that this distinction is a direct consequence of the fundamental difference in the underlying elementary relaxation process between these two dynamical classes of glass formers. For fragile glass formers, a density-exchange process proceeds the density relaxation, which takes place locally at the particle level in normal states but is increasingly cooperative and nonlocal as the temperature is lowered in supercooled states. On the other hand, in strong glass formers, such an exchange process is not necessary for density relaxation due to the presence of other local relaxation channels. Our finding provides a novel insight into Angell's classification scheme from a hydrodynamic perspective.

Comparison between different types of carboxylmethylcellulose and other oenological additives used for white wine tartaric stabilization.

PubMed

Guise, R; Filipe-Ribeiro, L; Nascimento, D; Bessa, O; Nunes, F M; Cosme, F

2014-08-01

Carboxylmethylcellulose (CMC) is authorised to prevent wine tartaric instability. The effect of CMC structural characteristics on their effectiveness is not well understood. The main purpose of this study was to compare the impact of CMC's with different degrees of substitution and molecular weight, on tartaric stability, tartaric acid, mineral concentration, phenolic compounds, chromatic and sensory characteristics in white wines, and compare its effectiveness with other oenological additives. Mini-contact test showed that all CMC's and metatartaric acid stabilized the wines; however, some arabic gums and mannoproteins do not stabilized the wines. CMC's had no significant effect on tartaric acid, potassium, calcium and sensory attributes. Tartaric stabilization effectiveness depends on CMC's degree of substitution, but also on wine matrix, probably its initial potassium content. Results suggest that CMC is a good alternative to white wine tartaric stabilization; nevertheless deeper structure knowledge is necessary in order to choose the appropriate CMC for a given tartaric instability. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cultural differences in complex addition: efficient Chinese versus adaptive Belgians and Canadians.

PubMed

Imbo, Ineke; LeFevre, Jo-Anne

2009-11-01

In the present study, the authors tested the effects of working-memory load on math problem solving in 3 different cultures: Flemish-speaking Belgians, English-speaking Canadians, and Chinese-speaking Chinese currently living in Canada. Participants solved complex addition problems (e.g., 58 + 76) in no-load and working-memory load conditions, in which either the central executive or the phonological loop was loaded. The authors used the choice/no-choice method to obtain unbiased measures of strategy selection and strategy efficiency. The Chinese participants were faster than the Belgians, who were faster and more accurate than the Canadians. The Chinese also required fewer working-memory resources than did the Belgians and Canadians. However, the Chinese chose less adaptively from the available strategies than did the Belgians and Canadians. These cultural differences in math problem solving are likely the result of different instructional approaches during elementary school (practice and training in Asian countries vs. exploration and flexibility in non-Asian countries), differences in the number language, and informal cultural norms and standards. The relevance of being adaptive is discussed as well as the implications of the results in regards to the strategy choice and discovery simulation model of strategy selection (J. Shrager & R. S. Siegler, 1998).

Bioactive composition and antioxidant potential of different commonly consumed coffee brews affected by their preparation technique and milk addition.

PubMed

Niseteo, Tena; Komes, Draženka; Belščak-Cvitanović, Ana; Horžić, Dunja; Budeč, Maja

2012-10-15

Coffee is one of the most popular beverages in the world, prepared and consumed in many different ways. Taste, aroma and composition of the coffee brew vary depending on the preparation method. Therefore, this study investigates the effect of different brewing methods on the polyphenol and methylxanthine composition and antioxidant capacity of thirteen different coffee brews. The content of total phenols and flavonoids was determined spectrophotometrically and the content of chlorogenic acid derivates (3-CQA, 4-CQA and 5-CQA) and caffeine using the high performance liquid chromatography (HPLC-PDA). Antioxidant capacity of coffee brews was evaluated by using the ABTS (2,2-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid)) and FRAP (ferric-reducing antioxidant power) assays. Instant coffee brews showed the highest values in content of total phenols, chlorogenic acid derivates, caffeine and antioxidant capacity, which significantly decreased by milk addition. The antioxidant capacity of coffee brews was in compliance with the total phenol content and content of chlorogenic acid derivates. Copyright © 2012 Elsevier Ltd. All rights reserved.

Sex differences in the significance of isolated reactive treponemal chemiluminescence immunoassay results.

PubMed

Bopage, Rohan I; Vollmer-Conna, Ute; Shand, Antonia W; Post, Jeffrey John

2018-05-01

The significance of sera with isolated reactive treponemal chemiluminescence immunoassay (IRTCIA) results is unclear. Women have this phenotype more commonly than men. Most cohorts examining this phenotype have included predominantly men and have demonstrated evidence of past or subsequently confirmed syphilis infection in a significant proportion of cases. We hypothesised that a proportion of sera with IRTCIA results would be positive on immunoblot testing and that sera from women with IRTCIA would have different results in immunoblot testing than men. IRTCIA sera from a tertiary referral serology laboratory serving multiple clinical sites were analysed with a syphilis line immunoblot assay (LIA) and analysed by sex. Logistic regression was undertaken to assess factors associated with LIA status. Medical record review and descriptive analysis of a separate cohort of women with the IRTCIA phenotype from a single campus was also undertaken. Overall, 19/63 (30.1%) subjects with the IRTCIA phenotype were positive in the LIA, including 13 men and 6 women. Women were significantly less likely to have definitive results (positive or negative) than men (p=0.015). Pregnant women were less likely than non-pregnant women to have a negative LIA result (OR 0.57; p=0.03). Record review of 22 different women with IRTCIA reactivity showed that 2/22 (9.1%) had HIV and previous syphilis infection, 15/22 (68.2%) were pregnant and 3 (13.6%) had autoimmune disease. A significant proportion of sera with IRTCIA results on serological tests are reactive on LIA testing and some may not be false positive results. The interpretation of IRTCIA results should be undertaken in conjunction with an assessment of factors such as sex, pregnancy, a history of syphilis and other STIs and syphilis risk. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Refolding of laccase from Trametes versicolor using aqueous two phase systems: Effect of different additives.

PubMed

Sánchez-Trasviña, Calef; Mayolo-Deloisa, Karla; González-Valdez, José; Rito-Palomares, Marco

2017-07-21

Protein refolding is a strategy used to obtain active forms of proteins from inclusion bodies. On its part, laccase is an enzyme with potential for different biotechnological applications but there are few reports regarding its refolding which in many cases is considered inefficient due to the poor obtained refolding yields. Aqueous Two-Phase Systems (ATPS) have been used for the refolding of proteins getting acceptable recovery percentages since PEG presents capacity to avoid protein aggregation. In this work, 48 PEG-phosphate ATPS were analyzed to study the impact of different parameters (i.e. tie line length (TLL), volume ratio (V R ) and PEG molecular weight) upon the recovery and refolding of laccase. Additionally, since laccase is a metalloprotein, the use of additives (individually and in mixture) was studied with the aim of favoring refolding. Results showed that laccase presents a high affinity for the PEG-rich phase obtaining recovery values of up to 90%. Such affinity increases with increasing TLL and decreases when PEG molecular weight and V R increase. In denatured state, this PEG-rich phase affinity decreases drastically. However, the use of additives such as l-cysteine, glutathione oxidized, cysteamine and Cu +2 was critical in improving refolding yield values up to 100%. The best conditions for the refolding of laccase were obtained using the PEG 400gmol -1 , TLL 45% w/w, V R 3 ATPS and a mixture of 2.5mM cysteamine with 1mM Cu +2 . To our knowledge, this is the first time that the use of additives and the behavior of the mixture of such additives to enhance refolding performance in ATPS is reported. Copyright © 2017 Elsevier B.V. All rights reserved.

Performance of cellulose acetate membrane with different additives for palm oil mill effluent (POME) liquid waste treatment

NASA Astrophysics Data System (ADS)

Aprilia, N. A. S.; Fauzi; Azmi, N.; Najwan, N.; Amin, A.

2018-03-01

Performance of cellulose acetate membrane for treatment of POME liquid has studied with different additives. Cellulose acetate membranes were prepared with different additive ie formamide and polyethylene glycol and used acetone as solvent. The function of formamide and polyethylene glycol (PEG) is to increase the porosity of the membrane surface. Performance of the membrane were included SEM, FT-IR and coefficient permeability. Membrane performance has been performed for percent rejection of total suspended solid (TSS) and turbidity of POME liquid waste. Cellulose acetate with formamide shows an increased percentage of rejection in removing TSS and turbidity than cellulose acetate with PEG.

Additive and non-additive genetic components of the jack male life history in Chinook salmon (Oncorhynchus tshawytscha).

PubMed

Forest, Adriana R; Semeniuk, Christina A D; Heath, Daniel D; Pitcher, Trevor E

2016-08-01

Chinook salmon, Oncorhynchus tshawytscha, exhibit alternative reproductive tactics (ARTs) where males exist in two phenotypes: large "hooknose" males and smaller "jacks" that reach sexual maturity after only 1 year in seawater. The mechanisms that determine "jacking rate"-the rate at which males precociously sexually mature-are known to involve both genetics and differential growth rates, where individuals that become jacks exhibit higher growth earlier in life. The additive genetic components have been studied and it is known that jack sires produce significantly more jack offspring than hooknose sires, and vice versa. The current study was the first to investigate both additive and non-additive genetic components underlying jacking through the use of a full-factorial breeding design using all hooknose sires. The effect of dams and sires descendant from a marker-assisted broodstock program that identified "high performance" and "low performance" lines using growth- and survival-related gene markers was also studied. Finally, the relative growth of jack, hooknose, and female offspring was examined. No significant dam, sire, or interaction effects were observed in this study, and the maternal, additive, and non-additive components underlying jacking were small. Differences in jacking rates in this study were determined by dam performance line, where dams that originated from the low performance line produced significantly more jacks. Jack offspring in this study had a significantly larger body size than both hooknose males and females starting 1 year post-fertilization. This study provides novel information regarding the genetic architecture underlying ARTs in Chinook salmon that could have implications for the aquaculture industry, where jacks are not favoured due to their small body size and poor flesh quality.

Soil respiration characteristics in different land uses and response of soil organic carbon to biochar addition in high-latitude agricultural area.

PubMed

Ouyang, Wei; Geng, Xiaojun; Huang, Wejia; Hao, Fanghua; Zhao, Jinbo

2016-02-01

The farmland tillage practices changed the soil chemical properties, which also impacted the soil respiration (R s ) process and the soil carbon conservation. Originally, the farmland in northeast China had high soil carbon content, which was decreased in the recent decades due to the tillage practices. To better understand the R s dynamics in different land use types and its relationship with soil carbon loss, soil samples at two layers (0-15 and 15-30 cm) were analyzed for organic carbon (OC), total nitrogen (TN), total phosphorus (TP), total carbon (TC), available nitrogen (AN), available phosphorus (AP), soil particle size distribution, as well as the R s rate. The R s rate of the paddy land was 0.22 (at 0-15 cm) and 3.01 (at 15-30 cm) times of the upland. The average concentrations of OC and clay content in cultivated areas were much lower than in non-cultivated areas. The partial least squares analysis suggested that the TC and TN were significantly related to the R s process in cultivated soils. The upland soil was further used to test soil CO2 emission response at different biochar addition levels during 70-days incubation. The measurement in the limited incubation period demonstrated that the addition of biochar improved the soil C content because it had high concentration of pyrogenic C, which was resistant to mineralization. The analysis showed that biochar addition can promote soil OC by mitigating carbon dioxide (CO2) emission. The biochar addition achieved the best performance for the soil carbon conservation in high-latitude agricultural area due to the originally high carbon content.

The Significance of Different Diacylgycerol Synthesis Pathways on Plant Oil Composition and Bioengineering

PubMed Central

Bates, Philip D.; Browse, John

2012-01-01

The unique properties of vegetable oils from different plants utilized for food, industrial feedstocks, and fuel is dependent on the fatty acid (FA) composition of triacylglycerol (TAG). Plants can use two main pathways to produce diacylglycerol (DAG), the immediate precursor molecule to TAG synthesis: (1) De novo DAG synthesis, and (2) conversion of the membrane lipid phosphatidylcholine (PC) to DAG. The FA esterified to PC are also the substrate for FA modification (e.g., desaturation, hydroxylation, etc.), such that the FA composition of PC-derived DAG can be substantially different than that of de novo DAG. Since DAG provides two of the three FA in TAG, the relative flux of TAG synthesis from de novo DAG or PC-derived DAG can greatly affect the final oil FA composition. Here we review how the fluxes through these two alternate pathways of DAG/TAG synthesis are determined and present evidence that suggests which pathway is utilized in different plants. Additionally, we present examples of how the endogenous DAG synthesis pathway in a transgenic host plant can produce bottlenecks for engineering of plant oil FA composition, and discuss alternative strategies to overcome these bottlenecks to produce crop plants with designer vegetable oil compositions. PMID:22783267

Effects of the addition of different nitrogen sources in the tequila fermentation process at high sugar concentration.

PubMed

Arrizon, J; Gschaedler, A

2007-04-01

To study the effect of the addition of different nitrogen sources at high sugar concentration in the tequila fermentation process. Fermentations were performed at high sugar concentration (170 g l(-1)) using Agave tequilana Weber blue variety with and without added nitrogen from different sources (ammonium sulfate; glutamic acid; a mixture of ammonium sulfate and amino acids) during the exponential phase of growth. All the additions increased the fermentation rate and alcohol efficiency. The level of synthesis of volatile compounds depended on the source added. The concentration of amyl alcohols and isobutanol were decreased while propanol and acetaldehyde concentration increased. The most efficient nitrogen sources for fermentation rate were ammonium sulfate and the mixture of ammonium sulfate and amino acids. The level of volatile compounds produced depended upon types of nitrogen. The synthesis of some volatile compounds increased while others decreased with nitrogen addition. The addition of nitrogen could be a strategy for improving the fermentation rate and efficiency in the tequila fermentation process at high sugar Agave tequilana concentration. Furthermore, the sensory quality of the final product may change because the synthesis of the volatile compounds is modified.

Investigation on stabilization of CO2 foam by ionic and nonionic surfactants in presence of different additives for application in enhanced oil recovery

NASA Astrophysics Data System (ADS)

Kumar, Sunil; Mandal, Ajay

2017-10-01

Application of foam in upstream petroleum industry specifically in enhanced oil recovery (EOR) has gained significant interest in recent years. In view of this, an attempt has been paid to design the suitable foaming agents (foamer) by evaluating the influence of three surfactants, five nanoparticles and several additives. Experimental investigations have been carried out in order to examine the mechanism of foam generation in presence of sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB) and polysorbate 80 (Tween 80) as anionic, cationic and nonionic surfactants by using the CO2 as gaseous component. It has been found that ionic surfactants show the higher foam life compared to nonionic surfactant. Out of different nano particles used, namely alumina (Al2O3) zirconium oxide (ZrO2), calcium carbonate (CaCO3), boron nitride (BN) and silica (SiO2), boron nitride shows the maximum improvement of foam stability. The foam stability of surfactant-nanoparticles foam is further increased by addition of different additives viz. polymer, alcohol and alkali. The results show that, the designed foaming solution have nearly 2.5 times higher half-decay time (t1/2) compared to the simple surfactant system. Finally, it has been found that gas injection rate plays an important role in obtaining a uniform and stabilized foam.

[Malassezia yeasts and their significance in dermatology].

PubMed

Hort, W; Nilles, M; Mayser, P

2006-07-01

Yeasts of the genus Malassezia belong to the normal microflora of the human skin. In addition they are known to cause a variety of skin diseases; the most frequent of which is pityriasis versicolor. Malassezia yeasts are also thought to be associated with seborrheic dermatitis, dandruff and Malassezia folliculitis. Recently the significance of Malassezia yeasts as a trigger factor for atopic dermatitis of the head and neck region has been pointed out. The role of the Malassezia yeasts in these different diseases has been controversial in the past and remains an issue because of difficulties in isolation, culture and differentiation of the organism. Thanks to molecular techniques, 10 species can actually be differentiated. The article presents the different Malassezia-associated diseases, their clinical picture, diagnosis and appropriate therapy. In addition the speciation of Malassezia is reviewed.

Cost Minimization Analysis of Different Strategies of Management of Clinically Significant Scorpion Envenomation Among Pediatric Patients.

PubMed

Sinha, Madhumita; Quan, Dan; McDonald, Fred W; Valdez, André

2016-12-01

Scorpion antivenom was recently approved for use in patients with clinically significant scorpion envenomation in the United States; no formal economic analysis on its impact on cost of management has been performed. Three different strategies of management of scorpion envenomation with systemic neurotoxic symptoms in children were compared for cost minimization from a societal perspective. In strategy I, patients were managed with supportive care only without antivenom. In strategy II, an aggressive strategy of full-dose antivenom (initial dose of 3 vials with the use of additional vials administered 1 vial at a time) was considered. In strategy III, a single-vial serial antivenom dosing strategy titrated to clinical response was considered. Clinical probabilities for the different strategies were obtained from retrospective review of medical records of patients with scorpion envenomation over a 10-year period at our institution. Baseline cost values were obtained from patient reimbursement data from our institution. In baseline analysis, strategy I of supportive care only with no antivenom was least costly at US $3466.50/patient. Strategy III of single-vial serial dosing was intermediate but less expensive than strategy II of full-dose antivenom, with an incremental cost of US $3171.08 per patient. In a 1-way sensitivity analysis, at a threshold antivenom cost of US $1577.87, strategy III of single-vial serial dosing became the least costly strategy. For children with scorpion envenomation, use of a management strategy based on serial dosing of antivenom titrated to clinical response is less costly than a strategy of initial use of full-dose antivenom.

Optimizing concentration of shifter additive for plastic scintillators of different size

NASA Astrophysics Data System (ADS)

Adadurov, A. F.; Zhmurin, P. N.; Lebedev, V. N.; Titskaya, V. D.

2009-02-01

This paper concerns the influence of wavelength shifting (secondary) luminescent additive (LA 2) on the light yield of polystyrene-based plastic scintillator (PS) taking self-absorption into account. Calculations of light yield dependence on concentration of 1.4-bis(2-(5-phenyloxazolyl)-benzene (POPOP) as LA 2 were made for various path lengths of photons in PS. It is shown that there is an optimal POPOP concentration ( Copt), which provides a maximum light yield for a given path length. This optimal concentration is determined by the competition of luminescence and self-reflection processes. Copt values were calculated for PS of different dimensions. For small PS, Copt≈0.02%, which agree with a common (standard) value of POPOP concentration. For higher PS dimensions, the optimal POPOP concentration is decreased (to Copt≈0.006% for 320×30×2 cm sample), reducing the light yield from PS by almost 35%.

Effects of arbuscular mycorrhizal fungi and soil nutrient addition on the growth of Phragmites australis under different drying-rewetting cycles.

PubMed

Liang, Jin-Feng; An, Jing; Gao, Jun-Qin; Zhang, Xiao-Ya; Yu, Fei-Hai

2018-01-01

The frequency of soil drying-rewetting cycles is predicted to increase under future global climate change, and arbuscular mycorrhizal fungi (AMF) are symbiotic with most plants. However, it remains unknown how AMF affect plant growth under different frequencies of soil drying-rewetting cycles. We subjected a clonal wetland plant Phragmites australis to three frequencies of drying-rewetting cycles (1, 2, or 4 cycles), two nutrient treatments (with or without), and two AMF treatments (with or without) for 64 days. AMF promoted the growth of P. australis, especially in the 2 cycles of the drying-rewetting treatment. AMF had a significant positive effect on leaf mass and number of ramets in the 2 cycles of the drying-rewetting treatment with nutrient addition. In the 2 cycles of drying-rewetting treatment without nutrient addition, AMF increased leaf area and decreased belowground to aboveground biomass ratio. These results indicate that AMF may assist P. australis in coping with medium frequency of drying-rewetting cycles, and provide theoretical guidance for predicting how wetland plants respond to future global climate change.

Violence-related Versus Terror-related Stabbings: Significant Differences in Injury Characteristics.

PubMed

Rozenfeld, Michael; Givon, Adi; Peleg, Kobi

2018-05-01

To demonstrate the gap between injury epidemiology of terror-related stabbings (TRS) and non-terror-related intentional stabbings. Terror attacks with sharp instruments have multiplied recently, with many victims of these incidents presented to hospitals with penetrating injuries. Because most practical experience of surgeons with intentional stabbing injuries comes from treating victims of interpersonal violence, potential gaps in knowledge may exist if injuries from TRS significantly differ from interpersonal stabbings (IPS). A retrospective study of 1615 patients from intentional stabbing events recorded in the Israeli National Trauma Registry during the period of "Knife Intifada" (January 2013-March 2016). All stabbings were divided into TRS and IPS. The 2 categories were compared in terms of sustained injuries, utilization of hospital resources, and clinical outcomes. TRS patients were older, comprised more females and were ethnically homogenous. Most IPS incidents happened on weekdays and at night hours, whereas TRS events peaked midweek during morning and afternoon hours. TRS patients had more injuries of head, face, and neck, and severe head and neck injuries. IPS patients had more abdomen injuries; however, respective injuries in the TRS group were more severe. Greater injury severity of the TRS patients reflected on their higher hospital resources utilization and greater in-hospital mortality. Victims of terror stabbings are profoundly different in their characteristics, sustain injuries of a different profile and greater severity, require more hospital resources, and have worse off clinical outcomes, emphasizing the need of the healthcare systems to adjust itself appropriately to deal successfully with future terror attacks.

Interactive effects of nutrient additions and predation on infaunal communities

USGS Publications Warehouse

Posey, M.H.; Alphin, T.D.; Cahoon, L.; Lindquist, D.; Becker, M.E.

1999-01-01

Nutrient additions represent an important anthropogenic stress on coastal ecosystems. At moderate levels, increased nutrients may lead to increased primary production and, possibly, to increased biomass of consumers although complex trophic interactions may modify or mask these effects. We examined the influence of nutrient additions and interactive effects of trophic interactions (predation) on benthic infaunal composition and abundances through small-scale field experiments in 2 estuaries that differed in ambient nutrient conditions. A blocked experimental design was used that allowed an assessment of direct nutrient effects in the presence and absence of predation by epibenthic predators as well as an assessment of the independent effects of predation. Benthic microalgal production increased with experimental nutrient additions and was greater when infaunal abundances were lower, but there were no significant interactions between these factors. Increased abundances of one infaunal taxa, Laeonereis culveri, as well as the grazer feeding guild were observed with nutrient additions and a number of taxa exhibited higher abundances with predator exclusion. In contrast to results from freshwater systems there were no significant interactive effects between nutrient additions and predator exclusion as was predicted. The infaunal responses observed here emphasize the importance of both bottom-up (nutrient addition and primary producer driven) and top-down (predation) controls in structuring benthic communities. These processes may work at different spatial and temporal scales, and affect different taxa, making observation of potential interactive effects difficult.

Different Ecological Niches for Ticks of Public Health Significance in Canada

PubMed Central

Gabriele-Rivet, Vanessa; Arsenault, Julie; Badcock, Jacqueline; Cheng, Angela; Edsall, Jim; Goltz, Jim; Kennedy, Joe; Lindsay, L. Robbin; Pelcat, Yann; Ogden, Nicholas H.

2015-01-01

Tick-borne diseases are a growing public health concern as their incidence and range have increased in recent decades. Lyme disease is an emerging infectious disease in Canada due to northward expansion of the geographic range of Ixodes scapularis, the principal tick vector for the Lyme disease agent Borrelia burgdorferi, into central and eastern Canada. In this study the geographical distributions of Ixodid ticks, including I. scapularis, and environmental factors associated with their occurrence were investigated in New Brunswick, Canada, where few I. scapularis populations have been found to date. Density of host-seeking ticks was evaluated by drag sampling of woodland habitats in a total of 159 sites. Ixodes scapularis ticks (n = 5) were found on four sites, Ixodes muris (n = 1) on one site and Haemaphysalis leporispalustris (n = 243) on 41 sites. One of four adult I. scapularis ticks collected was PCR-positive for B. burgdorferi. No environmental variables were significantly associated with the presence of I. scapularis although comparisons with surveillance data in neighbouring provinces (Québec and Nova Scotia) suggested that temperature conditions may be too cold for I. scapularis (< 2800 annual degree days above 0°C [DD > 0°C]) across much of New Brunswick. In contrast, the presence of H. leporispalustris, which is a competent vector of tularaemia, was significantly (P < 0.05) associated with specific ranges of mean DD > 0°C, mean annual precipitation, percentage of clay in site soil, elevation and season in a multivariable logistic regression model. With the exception of some localized areas, temperature conditions and deer density may be too low for the establishment of I. scapularis and Lyme disease risk areas in New Brunswick, while environmental conditions were suitable for H. leporispalustris at many sites. These findings indicate differing ecological niches for two tick species of public health significance. PMID:26131550

Different Ecological Niches for Ticks of Public Health Significance in Canada.

PubMed

Gabriele-Rivet, Vanessa; Arsenault, Julie; Badcock, Jacqueline; Cheng, Angela; Edsall, Jim; Goltz, Jim; Kennedy, Joe; Lindsay, L Robbin; Pelcat, Yann; Ogden, Nicholas H

2015-01-01

Tick-borne diseases are a growing public health concern as their incidence and range have increased in recent decades. Lyme disease is an emerging infectious disease in Canada due to northward expansion of the geographic range of Ixodes scapularis, the principal tick vector for the Lyme disease agent Borrelia burgdorferi, into central and eastern Canada. In this study the geographical distributions of Ixodid ticks, including I. scapularis, and environmental factors associated with their occurrence were investigated in New Brunswick, Canada, where few I. scapularis populations have been found to date. Density of host-seeking ticks was evaluated by drag sampling of woodland habitats in a total of 159 sites. Ixodes scapularis ticks (n = 5) were found on four sites, Ixodes muris (n = 1) on one site and Haemaphysalis leporispalustris (n = 243) on 41 sites. One of four adult I. scapularis ticks collected was PCR-positive for B. burgdorferi. No environmental variables were significantly associated with the presence of I. scapularis although comparisons with surveillance data in neighbouring provinces (Québec and Nova Scotia) suggested that temperature conditions may be too cold for I. scapularis (< 2800 annual degree days above 0°C [DD > 0°C]) across much of New Brunswick. In contrast, the presence of H. leporispalustris, which is a competent vector of tularaemia, was significantly (P < 0.05) associated with specific ranges of mean DD > 0°C, mean annual precipitation, percentage of clay in site soil, elevation and season in a multivariable logistic regression model. With the exception of some localized areas, temperature conditions and deer density may be too low for the establishment of I. scapularis and Lyme disease risk areas in New Brunswick, while environmental conditions were suitable for H. leporispalustris at many sites. These findings indicate differing ecological niches for two tick species of public health significance.

No significant effect of transcranial direct current stimulation (tDCS) found on simple motor reaction time comparing 15 different simulation protocols.

PubMed

Horvath, Jared Cooney; Carter, Olivia; Forte, Jason D

2016-10-01

Research exploring the behavioral impact of transcranial direct current stimulation (tDCS) over M1 has produced homogenous results. The most common explanations to address this homogeneity concerns the differential impact of varied tDCS parameters (such as stimulation intensity or electrode montage). To explore this, we systematically examined the effects of 15 different tDCS protocols on a well-elucidated neurobehavioral system: simple visual motor reaction time (smRT). For the initial phase of this study, 150 healthy participants were randomly assigned to one of 5 experimental groups (2mA anodal, 2mA cathodal, 1mA anodal, 1mA cathodal, or sham) across 3 different conditions (orbitofrontal, bilateral, or extracephalic reference electrode location). The active electrode was always placed over M1 and tDCS lasted for 20min. Starting ~5min prior to stimulation and running continuously for ~30min, participants were repeatedly presented with a visual cue centered on a computer monitor and asked to press a response button as quickly as possible at stimulus onset (stimuli number: 100 pre-, 400 during-, and 100-post stimulation - interstimulus interval: 1-3s). Ex-gaussian distribution curves, miss, and error rates were determined for each normalized batch of 100 RTs and compared using a two-way ANOVA. As the largest group differences were seen with 2mA anodal (compared to sham) stimulation using an orbitofrontal montage, an additional 60 healthy participants were recruited to further test for significance in this condition. No significant impact of tDCS was seen on any parameter of smRT distribution, error rate, or miss rate, regardless of polarity, stimulation intensity, electrode montage, or stimulation-to-task relationship. Our results suggest that tDCS over M1 might not have a predictable or reliable effect on short duration smRT. Our results raise interesting questions regarding the mechanisms by which tDCS might modulate more complex motor behaviors. Additional

The ecological significance of phenology in four different tree species: effects of light and temperature on bud burst

NASA Astrophysics Data System (ADS)

Caffarra, Amelia; Donnelly, Alison

2011-09-01

The process of adaptation is the result of stabilising selection caused by two opposite forces: protection against an unfavourable season (survival adaptation), and effective use of growing resources (capacity adaptation). As plant species have evolved different life strategies based on different trade offs between survival and capacity adaptations, different phenological responses are also expected among species. The aim of this study was to compare budburst responses of two opportunistic species ( Betula pubescens, and Salix x smithiana) with that of two long-lived, late successional species ( Fagus sylvatica and Tilia cordata) and consider their ecological significance. Thus, we performed a series of experiments whereby temperature and photoperiod were manipulated during dormancy. T. cordata and F. sylvatica showed low rates of budburst, high chilling requirements and responsiveness to light intensity, while B. pubescens and S. x smithiana had high rates of budburst, low chilling requirements and were not affected by light intensity. In addition, budburst in B. pubescens and S. x smithiana was more responsive to high forcing temperatures than in T. cordata and F. sylvatica. These results suggest that the timing of growth onset in B. pubescens and S. x smithiana (opportunistic) is regulated through a less conservative mechanism than in T. cordata and F. sylvatica (long-lived, late successional), and that these species trade a higher risk of frost damage for the opportunity of vigorous growth at the beginning of spring, before canopy closure. This information should be considered when assessing the impacts of climate change on vegetation or developing phenological models.

Significant interarm blood pressure difference predicts cardiovascular risk in hypertensive patients: CoCoNet study.

PubMed

Kim, Su-A; Kim, Jang Young; Park, Jeong Bae

2016-06-01

There has been a rising interest in interarm blood pressure difference (IAD), due to its relationship with peripheral arterial disease and its possible relationship with cardiovascular disease. This study aimed to characterize hypertensive patients with a significant IAD in relation to cardiovascular risk. A total of 3699 patients (mean age, 61 ± 11 years) were prospectively enrolled in the study. Blood pressure (BP) was measured simultaneously in both arms 3 times using an automated cuff-oscillometric device. IAD was defined as the absolute difference in averaged BPs between the left and right arm, and an IAD ≥ 10 mm Hg was considered to be significant. The Framingham risk score was used to calculate the 10-year cardiovascular risk. The mean systolic IAD (sIAD) was 4.3 ± 4.1 mm Hg, and 285 (7.7%) patients showed significant sIAD. Patients with significant sIAD showed larger body mass index (P < 0.001), greater systolic BP (P = 0.050), more coronary artery disease (relative risk = 1.356, P = 0.034), and more cerebrovascular disease (relative risk = 1.521, P = 0.072). The mean 10-year cardiovascular risk was 9.3 ± 7.7%. By multiple regression, sIAD was significantly but weakly correlated with the 10-year cardiovascular risk (β = 0.135, P = 0.008). Patients with significant sIAD showed a higher prevalence of coronary artery disease, as well as an increase in 10-year cardiovascular risk. Therefore, accurate measurements of sIAD may serve as a simple and cost-effective tool for predicting cardiovascular risk in clinical settings.

Increased frequency of retinopathy of prematurity over the last decade and significant regional differences.

PubMed

Holmström, Gerd; Tornqvist, Kristina; Al-Hawasi, Abbas; Nilsson, Åsa; Wallin, Agneta; Hellström, Ann

2018-03-01

Retinopathy of prematurity (ROP) causes childhood blindness globally in prematurely born infants. Although increased levels of oxygen supply lead to increased survival and reduced frequency of cerebral palsy, increased incidence of ROP is reported. With the help of a Swedish register for ROP, SWEDROP, national and regional incidences of ROP and frequencies of treatment were evaluated from 2008 to 2015 (n = 5734), as well as before and after targets of provided oxygen changed from 85-89% to 91-95% in 2014. Retinopathy of prematurity (ROP) was found in 31.9% (1829/5734) of all infants with a gestational age (GA) of <31 weeks at birth and 5.7% of the infants (329/5734) had been treated for ROP. Analyses of the national data revealed an increased incidence of ROP during the 8-year study period (p = 0.003), but there was no significant increase in the frequency of treatment. There were significant differences between the seven health regions of Sweden, regarding both incidence of ROP and frequency of treatment (p < 0.001). Comparison of regional data before and after the new oxygen targets revealed a significant increase in treated ROP in one region [OR: 2.24 (CI: 1.11-4.49), p = 0.024] and a borderline increase in one other [OR: 3.08 (CI: 0.99-9.60), p = 0.052]. The Swedish national ROP register revealed an increased incidence of ROP during an 8-year period and significant regional differences regarding the incidence of ROP and frequency of treatment. © 2017 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Design and fabrication of the progressive addition lenses

NASA Astrophysics Data System (ADS)

Qin, Linling; Qian, Lin; Yu, Jingchi

2011-11-01

The use of progressive addition lenses (PALs) for the correction of presbyopia has increased dramatically in recent years. These lenses are now being used as the preferred alternative to bifocal and trifocal lenses in many parts of the world. Progressive addition lenses are a kind of opthalmic lenses with freeform surface. The surface curvature of the Progressive addition lenses varies gradually from a minimum value in the upper area, to a maximum value in the lower area. Thus a PAL has a surface with three zones which have very small astigmatism: far-view zone, near-view zone, and intermediate zone. The far view zone and near view zone have relatively constant powers and connected by the intermediate zone with power varies progressively. The design and fabrication technologies of progressive addition lenses have fast progresses because of the massive development of the optical simulation software, multi-axis ultraprecision machining technologies and CNC machining technologies. The design principles of progressive addition lenses are discussed in a historic review. Several kinds of design methods are illustrated, and their advantages and disadvantages are also represented. In the current study, it is shown that the optical characteristics of the different progressive addition lenses designs are significantly different from one another. The different fabrication technologies of Progressive addition lenses are also discussed in the paper. Plastic injection molding and precision-machine turning are the common fabrication technologies for exterior PALs and Interior PALs respectively.

Characterization of TiN, TiC and Ti(C,N) in titanium-alloyed ferritic chromium steels focusing on the significance of different particle morphologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michelic, S.K., E-mail: susanne.michelic@unileoben.ac.at; Loder, D.; Reip, T.

2015-02-15

Titanium-alloyed ferritic chromium steels are a competitive option to classical austenitic stainless steels owing to their similar corrosion resistance. The addition of titanium significantly influences their final steel cleanliness. The present contribution focuses on the detailed metallographic characterization of titanium nitrides, titanium carbides and titanium carbonitrides with regard to their size, morphology and composition. The methods used are manual and automated Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy as well as optical microscopy. Additional thermodynamic calculations are performed to explain the precipitation procedure of the analyzed titanium nitrides. The analyses showed that homogeneous nucleation is decisive at an earlymore » process stage after the addition of titanium. Heterogeneous nucleation gets crucial with ongoing process time and essentially influences the final inclusion size of titanium nitrides. A detailed investigation of the nuclei for heterogeneous nucleation with automated Scanning Electron Microscopy proved to be difficult due to their small size. Manual Scanning Electron Microscopy and optical microscopy have to be applied. Furthermore, it was found that during solidification an additional layer around an existing titanium nitride can be formed which changes the final inclusion morphology significantly. These layers are also characterized in detail. Based on these different inclusion morphologies, in combination with thermodynamic results, tendencies regarding the formation and modification time of titanium containing inclusions in ferritic chromium steels are derived. - Graphical abstract: Display Omitted - Highlights: • The formation and modification of TiN in the steel 1.4520 was examined. • Heterogeneous nucleation essentially influences the final steel cleanliness. • In most cases heterogeneous nuclei in TiN inclusions are magnesium based. • Particle morphology provides important

Additive Manufacturing Infrared Inspection

NASA Technical Reports Server (NTRS)

Gaddy, Darrell

2014-01-01

Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

Effects of meat addition on pasta structure, nutrition and in vitro digestibility.

PubMed

Liu, Tingting; Hamid, Nazimah; Kantono, Kevin; Pereira, Loveena; Farouk, Mustafa M; Knowles, Scott O

2016-12-15

In our study, semolina flour was substituted with beef emulsion (EM) at three different levels of 15, 30 and 45% (w/w) to develop a pasta with enhanced nutritional profile. The protein, fat, and water content significantly increased with addition of meat. The addition of meat enhanced the pasta gluten network. The redness and yellowness of cooked pasta increased with meat addition. Tensile strength increased from 0.018N/mm(2) in the control sample to 0.046N/mm(2) in 45% beef emulsion (45EM) sample. All meat-containing samples had significantly higher elasticity than control (0.039N/mm(2)). GI significantly decreased and IVPD value increased in 45EM sample. Five essential amino acids (leucine, lysine, methionine, threonine, tryptophan) in pasta digesta increased significantly with increasing meat addition. Copyright © 2016 Elsevier Ltd. All rights reserved.

Gender differences and regionalization of the cultural significance of wild mushrooms around La Malinche volcano, Tlaxcala, Mexico.

PubMed

Montoya, A; Torres-García, E A; Kong, A; Estrada-Torres, A; Caballero, J

2012-01-01

The purpose of this study was to determine the cultural significance of wild mushrooms in 10 communities on the slopes of La Malinche volcano, Tlaxcala. The frequency and order of mention of each mushroom species in interviews of 200 individuals were used as indicators of the relative cultural significance of each species. A X(2) analysis was used to compare the frequency of mention of each species between males and females, and a Mann-Whitney U test was used to compare the difference in the total number of fungi mentioned by either gender. Traditional names for mushroom species were documented and frequency of mention assessed through multivariate statistics. The fungi with highest frequency of mention were Amanita basii, Lyophyllum decastes, Boletus pinophilus, Gomphus floccosus and Cantharellus cibarius complex. We found significant differences in the frequency of mention of different fungi by males and females but no significant difference was found for the total number of fungi mentioned by either gender. Principal component analysis suggested a cultural regionalization of La Malinche volcano communities based on preferences for consumption and use of traditional names. We observed two groups: one formed by communities on the eastern part of the volcano (with mixed cultures) and the other including communities on the western slope (ethnic Nahua towns). San Isidro Buensuceso is the most distinct community, according to the criteria in this study.

Full investigation of patients with polycystic ovary syndrome (PCOS) presenting to four different clinical specialties reveals significant differences and undiagnosed morbidity.

PubMed

Sivayoganathan, Dhakshana; Maruthini, Deivanayagam; Glanville, Julie M; Balen, Adam H

2011-12-01

This study aimed to compare the spectrum of polycystic ovary syndrome (PCOS) symptoms in patients from four different specialist clinics. A prospective cross-sectional observational study. The study was conducted at the infertility, gynaecology, endocrine and dermatology clinics at Leeds General Infirmary, U.K. Seventy women presenting with features of PCOS: 20 from infertility, 17 from gynaecology, 17 from dermatology and 16 from endocrine clinics. Participants were assessed for symptoms and signs of PCOS and underwent a full endocrine and metabolic profile and a pelvic ultrasound scan. All subjects had experienced menstrual problems, 81% were overweight, 86% had polycystic ovaries on ultrasound, 56% had hirsutism, 53% had acne, 23% had acanthosis nigricans, 16% had alopecia and 38% had previously undiagnosed impaired glucose tolerance (IGT) or diabetes. A significant difference between the four clinic groups existed with regard to menstrual patterns (p = 0.0234), frequency distribution of presenting symptoms and the percentages of patients with PCOS who had already been diagnosed as having PCOS (p = 0.0088). This study emphasizes the importance of understanding the full spectrum of PCOS as presented to different specialty clinics. Not only is the syndrome under diagnosed but also are the significant associated morbidities such as IGT and type 2 diabetes. Different specialists need to appreciate the spectrum of health problems for women with PCOS that may extend beyond the specific symptoms that precipitated the initial referral.

Additional Value of Transluminal Attenuation Gradient in CT Angiography to Predict Hemodynamic Significance of Coronary Artery Stenosis

PubMed Central

Stuijfzand, Wynand J.; Danad, Ibrahim; Raijmakers, Pieter G.; Marcu, C. Bogdan; Heymans, Martijn W.; van Kuijk, Cornelis C.; van Rossum, Albert C.; Nieman, Koen; Min, James K.; Leipsic, Jonathon; van Royen, Niels; Knaapen, Paul

2015-01-01

OBJECTIVES The current study evaluates the incremental value of transluminal attenuation gradient (TAG), TAG with corrected contrast opacification (CCO), and TAG with exclusion of calcified coronary segments (ExC) over coronary computed tomography angiogram (CTA) alone using fractional flow reserve (FFR) as the gold standard. BACKGROUND TAG is defined as the contrast opacification gradient along the length of a coronary artery on a coronary CTA. Preliminary data suggest that TAG provides additional functional information. Interpretation of TAG is hampered by multiple heartbeat acquisition algorithms and coronary calcifications. Two correction models have been proposed based on either dephasing of contrast delivery by relating coronary density to corresponding descending aortic opacification (TAG-CCO) or excluding calcified coronary segments (TAG-ExC). METHODS Eighty-five patients with intermediate probability of coronary artery disease were prospectively included. All patients underwent step-and-shoot 256-slice coronary CTA. TAG, TAG-CCO, and TAG-ExC analyses were performed followed by invasive coronary angiography in conjunction with FFR measurements of all major coronary branches. RESULTS Thirty-four patients (40%) were diagnosed with hemodynamically-significant coronary artery disease (i.e., FFR ≤0.80). On a per-vessel basis (n = 253), 59 lesions (23%) were graded as hemodynamically significant, and the diagnostic accuracy of coronary CTA (diameter stenosis ≥50%) was 95%, 75%, 98%, and 54% for sensitivity, specificity, negative predictive value, and positive predictive value, respectively. TAG and TAG-ExC did not discriminate between vessels with or without hemodynamically significant lesions (−13.5 ± 17.1 HU [Hounsfield units] × 10 mm−1 vs. −11.6 ± 13.3 HU × 10 mm−1, p = 0.36; and 13.1 ± 15.9 HU × 10 mm−1 vs. −11.4 ± 11.7 HU × 10 mm−1, p = 0.77, respectively). TAG-CCO was lower in vessels with a hemodynamically-significant lesion (−0

The significance of Antarctica for studies of global geodynamics

USGS Publications Warehouse

Sutherland, R.

2007-01-01

Antarctica has geometric significance for global plate kinematic studies, because it links seafloor spreading systems of the African hemisphere (Indian and Atlantic Oceans) with those of the Pacific. Inferences of plate motions back to 44 Ma, around the onset of rapid spreading south of Australia and formation of a new boundary through New Zealand, are consistent with Antarctic rifting and formation of the Adare Basin during 44-26 Ma (i.e., no additional plate motions are required in the South Pacific). The time period 52-44 Ma represents a profound global and South Pacific tectonic change, and significant details remain unresolved. For 74 Ma a significant nonclosure of the South Pacific plate-motion circuit is identified if Antarctic motion is not included. Alternate inferences of motion through Antarctica during the interval 74-44 Ma imply significantly different subduction volumes and directions around the Pacific, and imply different relative motions between hotspots

Significant Figures in Measurements with Uncertainty: A Working Criterion

NASA Astrophysics Data System (ADS)

Vilchis, Abraham

2017-03-01

Generally speaking, students have difficulty reporting out measurements and estimates of quantities used in the laboratory, and with handling the significant figures associated with them. When required to make calculation involving quantities with different numbers of significant figures, they have difficulty in assigning the corresponding digits to the final result. When in addition, the quantities have uncertainty, the operations entailed pose an even greater challenge. The article advocates for some working rules for students (and teachers) in an effort to combat this problem.

Using the Bootstrap Method for a Statistical Significance Test of Differences between Summary Histograms

NASA Technical Reports Server (NTRS)

Xu, Kuan-Man

2006-01-01

A new method is proposed to compare statistical differences between summary histograms, which are the histograms summed over a large ensemble of individual histograms. It consists of choosing a distance statistic for measuring the difference between summary histograms and using a bootstrap procedure to calculate the statistical significance level. Bootstrapping is an approach to statistical inference that makes few assumptions about the underlying probability distribution that describes the data. Three distance statistics are compared in this study. They are the Euclidean distance, the Jeffries-Matusita distance and the Kuiper distance. The data used in testing the bootstrap method are satellite measurements of cloud systems called cloud objects. Each cloud object is defined as a contiguous region/patch composed of individual footprints or fields of view. A histogram of measured values over footprints is generated for each parameter of each cloud object and then summary histograms are accumulated over all individual histograms in a given cloud-object size category. The results of statistical hypothesis tests using all three distances as test statistics are generally similar, indicating the validity of the proposed method. The Euclidean distance is determined to be most suitable after comparing the statistical tests of several parameters with distinct probability distributions among three cloud-object size categories. Impacts on the statistical significance levels resulting from differences in the total lengths of satellite footprint data between two size categories are also discussed.

Significant Coronary Stenosis in Asymptomatic Chinese With Different Glycemic Status

PubMed Central

Xu, Yu; Bi, Yufang; Li, Mian; Wang, Tiange; Sun, Kun; Xu, Min; Lu, Jieli; Yu, Yi; Li, Xiaoying; Lai, Shenghan; Wang, Weiqing; Ning, Guang

2013-01-01

OBJECTIVE To evaluate coronary artery stenosis in early diabetes or prediabetes asymptomatic of myocardial ischemia in community-dwelling Chinese adults. RESEARCH DESIGN AND METHODS Age- and sex-matched participants with normal glucose regulation (NGR), prediabetes, or diabetes diagnosed within 5 years, asymptomatic of coronary artery disease (CAD), were randomly selected from a community-dwelling Chinese population aged 40–60 years. Dual-source computed tomography coronary angiography was used to evaluate the existence and extent of coronary stenosis, which was considered significant if >50% narrowing of vessel lumen was detected. RESULTS After excluding uninterpretable segments attributable to motion artifacts, a total of 135 participants with NGR, 132 with prediabetes, and 134 with diabetes participated in data analysis. Significant coronary stenosis was detected in 10 (7.4%), 10 (7.6%), and 22 (16.4%) individuals with NGR, prediabetes, and diabetes, respectively (P for trend = 0.029). Diabetes, rather than prediabetes, was associated with a significant 2.34-fold elevated risk [odds ratio (OR) 2.34 (95% CI 1.01–5.43); P = 0.047] of significant coronary stenosis as compared with that associated with NGR. Levels of glucose evaluation were independently and significantly associated with risks of significant coronary stenosis in diabetes. Each 1-SD increase in fasting plasma glucose, 2-h postload plasma glucose, and HbA1c conveyed 2.11-fold, 1.73-fold, and 1.81-fold higher risks of significant coronary stenosis, respectively, after adjustment for other conventional cardiovascular risk factors. CONCLUSIONS Using a noninvasive CAD diagnostic modality such as dual-source computed tomography coronary angiography, we detected a markedly elevated risk of significant coronary stenosis with early diabetes in asymptomatic Chinese adults. PMID:23462666

Significantly Increased Odds of Reporting Previous Shoulder Injuries in Female Marines Based on Larger Magnitude Shoulder Rotator Bilateral Strength Differences

PubMed Central

Eagle, Shawn R.; Connaboy, Chris; Nindl, Bradley C.; Allison, Katelyn F.

2018-01-01

Background: Musculoskeletal injuries to the extremities are a primary concern for the United States (US) military. One possible injury risk factor in this population is side-to-side strength imbalance. Purpose: To examine the odds of reporting a previous shoulder injury in US Marine Corps Ground Combat Element Integrated Task Force volunteers based on side-to-side strength differences in isokinetic shoulder strength. Study Design: Cohort study; Level of evidence, 3. Methods: Male (n = 219) and female (n = 91) Marines were included in this analysis. Peak torque values from 5 shoulder internal/external rotation repetitions were averaged and normalized to body weight. The difference in side-to-side strength measurements was calculated as the absolute value of the limb difference divided by the mean peak torque of the dominant limb. Participants were placed into groups based on the magnitude of these differences: <10%, 10% to 20%, and >20%. Odds ratios (ORs) and 95% CIs were calculated. Results: When separated by sex, 13.2% of men reported an injury, while 5.5% of women reported an injury. Female Marines with >20% internal rotation side-to-side strength differences demonstrated increased odds of reporting a previous shoulder injury compared with female Marines with <10% strength differences (OR, 15.4; 95% CI, 1.4-167.2; P = .03 ) and female Marines with 10% to 20% strength differences (OR, 13.9; 95% CI, 1.3-151.2; P = .04). No significant ORs were demonstrated in male Marines. Conclusion: Marines with larger magnitude internal rotation strength differences demonstrated increased odds of reporting a previous shoulder injury compared with those with lesser magnitude differences. Additionally, female sex appears to drastically affect the increased odds of reporting shoulder injuries (OR, 13.9-15.4) with larger magnitude differences (ie, >20%) compared with those with lesser magnitude differences (ie, <10% and 10%-20%). The retrospective cohort design of this study cannot

Significantly Increased Odds of Reporting Previous Shoulder Injuries in Female Marines Based on Larger Magnitude Shoulder Rotator Bilateral Strength Differences.

PubMed

Eagle, Shawn R; Connaboy, Chris; Nindl, Bradley C; Allison, Katelyn F

2018-02-01

Musculoskeletal injuries to the extremities are a primary concern for the United States (US) military. One possible injury risk factor in this population is side-to-side strength imbalance. To examine the odds of reporting a previous shoulder injury in US Marine Corps Ground Combat Element Integrated Task Force volunteers based on side-to-side strength differences in isokinetic shoulder strength. Cohort study; Level of evidence, 3. Male (n = 219) and female (n = 91) Marines were included in this analysis. Peak torque values from 5 shoulder internal/external rotation repetitions were averaged and normalized to body weight. The difference in side-to-side strength measurements was calculated as the absolute value of the limb difference divided by the mean peak torque of the dominant limb. Participants were placed into groups based on the magnitude of these differences: <10%, 10% to 20%, and >20%. Odds ratios (ORs) and 95% CIs were calculated. When separated by sex, 13.2% of men reported an injury, while 5.5% of women reported an injury. Female Marines with >20% internal rotation side-to-side strength differences demonstrated increased odds of reporting a previous shoulder injury compared with female Marines with <10% strength differences (OR, 15.4; 95% CI, 1.4-167.2; P = .03 ) and female Marines with 10% to 20% strength differences (OR, 13.9; 95% CI, 1.3-151.2; P = .04). No significant ORs were demonstrated in male Marines. Marines with larger magnitude internal rotation strength differences demonstrated increased odds of reporting a previous shoulder injury compared with those with lesser magnitude differences. Additionally, female sex appears to drastically affect the increased odds of reporting shoulder injuries (OR, 13.9-15.4) with larger magnitude differences (ie, >20%) compared with those with lesser magnitude differences (ie, <10% and 10%-20%). The retrospective cohort design of this study cannot delineate cause and effect but establishes a relationship between

Digestive microbiota is different in pigs receiving antimicrobials or a feed additive during the nursery period.

PubMed

Soler, Cassandra; Goossens, Tim; Bermejo, Alvaro; Migura-García, Lourdes; Cusco, Anna; Francino, Olga; Fraile, Lorenzo

2018-01-01

Antimicrobials have been used in a prophylactic way to decrease the incidence of digestive disorders during the piglet post-weaning period. Nowadays, it is urgent to reduce their consumption in livestock to address the problem of antimicrobial resistance. In this study, the effect of a product on piglet microbiota has been investigated as an alternative to antimicrobials. Three groups of ten post-weaning pigs were sampled at 0, 15 and 30 days one week post-weaning; the control, antibiotic and feed additive group received a standard post-weaning diet without antibiotics or additives, the same diet as the control group but with amoxicillin and colistin sulphate and the same diet as the control group but with a feed additive (Sanacore-EN, Nutriad International N.V.), respectively. The total DNA extracted from faeces was used to amplify the 16S RNA gene for massive sequencing under manufacturer's conditions. Sequencing data was quality filtered and analyzed using QIIME software and suitable statistical methods. In general terms, age modifies significantly the microbiota of the piglets. Thus, the oldest the animal, the highest bacterial diversity observed for the control and the feed additive groups. However, this diversity was very similar in the antibiotic group throughout the trial. Interestingly, a clear increase in abundance of Bacillus and Lactobacillus spp was detected within the feed additive group versus the antibiotic and control groups. In conclusion, the feed additive group had a positive effect in the endogenous microbiota of post-weaning pigs increasing both, the diversity of bacterial families and the abundance of lactic acid bacteria during the post-weaning period.

Replication of a whole school ethos-changing intervention: different context, similar effects, additional insights.

PubMed

Hawe, Penelope; Bond, Lyndal; Ghali, Laura M; Perry, Rosemary; Davison, Colleen M; Casey, David M; Butler, Helen; Webster, Cynthia M; Scholz, Bert

2015-03-19

Whole school, ethos-changing interventions reduce risk behaviours in middle adolescence, more than curriculum-based approaches. Effects on older ages are not known. We set out to replicate one of these interventions, Australia's Gatehouse Project, in a rural Canadian high school. A guided, whole school change process sought to make students feel more safe, connected, and valued by: changes in teaching practices, orientation processes, professional development of staff, recognition and reward mechanisms, elevating student voice, and strategies to involve greater proactivity and participation. We conducted risk behaviour surveys in grades 10 to 12 before the intervention and 2 years afterwards, and social network analyses with the staff. Changes in health and health risk behaviours were assessed using chi-square. Interactions between the intervention and gender and between the intervention and school engagement were assessed using interaction terms in logistic regression models. Changes in the density of relationships among staff were tested with methods analogous to paired t-tests. Like Gatehouse, there was no statistically significant reduction in depressive symptoms or bullying, though the trend was in that direction. Among girls, there was a statistically significant decrease in low school engagement (45% relative reduction), and decreases in drinking (46% relative reduction), unprotected sex (61% relative reduction) and poor health (relative reduction of 73%). The reduction in drinking matched the national trend. Reductions in unprotected sex and poor health went against the national trend. We found no statistically significant changes for boys. The effects coincided with statistically significant increases in the densities of staff networks, indicating that part of the mechanism may be through relationships at school. A non-specific, risk protective intervention in the social environment of the school had a significant impact on a cluster of risk behaviours

The Quality of Edible Film Made from Nile Tilapia (Oreochromis niloticus) Skin Gelatin with Addition of Different Type Seaweed Hydrocolloid

NASA Astrophysics Data System (ADS)

Deanti, H.; Hulu, J. M.; Setyaji, A.; Eliyanti, R. N.; Aliya, K.; Dewi, E. N.

2018-02-01

The functional properties of fish skin’s gelatin lower than mammals, hence the gelatin proteins needed a polysaccharides hydrocolloids to form a continuous and more cohesive network of edible film. Polysaccharides hydrocolloid (carrageenan, agar and alginate) containing phenol compounds was oxidized to be converted into quinone and it was expected to act as a cross linking agent. The purpose of this study was to determine the characteristics (thickness, tensile strength, elongation, solubility and water vapour transmition rate) of edible film made from nile tilapia skin gelatin by adding different type polyssacharide hydrocolloid. Edible film was made by mixture of gelatin 5 g and addition of carrageenan (C1), agar (C2), alginate (C3) concentration ; 0,5% (v/w), all the materials were poured into 100 ml destilled water that containing 10% glycerol (w/w). The solution was then heated on a hot plate stirer at 40°C for 30 min and dehydrated in a oven at 50°C. All data were analysed using ANAVA. Based on the result it can be seen that the addition of oxidized polisacarides hydrocolloid have a significant effect on tensile strength (TS), water vapor transmision rate, solubility and elongation at break properties, but did not in thickness. Edible film gelatin with the addition of alginate has better characteristics viewed by tensile strength (23.05 Kgf/cm2), water vapor transmission rate (0.61 gram/m2/hour) and thickness (0.16 mm) than carrageenan and agar.

Clinical Significance and Characteristic Clinical Differences of Cytolytic Vaginosis in Recurrent Vulvovaginitis.

PubMed

Yang, Shuhua; Zhang, Yuexiang; Liu, Ying; Wang, Jianhong; Chen, Shuqin; Li, Shuxia

2017-01-01

The study aimed to evaluate whether cytolytic vaginosis (CV) has important clinical implications for recurrent vulvovaginitis and to identify clinical differences between CV and vulvovaginal candidosis (VVC). Medical histories, physical examinations and laboratory findings were used to diagnose and assess the prevalence rates of various vulvovaginal infections among 536 women with recurrent vulvovaginitis. Chi-square and Fisher exact tests were used to compare age, menstrual cycle phase at episode onset, symptoms/signs of infection and discharge characteristics between CV and VVC with single infection. Among the 484 women with a single-infection recurrent vulvovaginitis, the prevalence of CV (n = 143; 26.7%) was second only to VVC (n = 196; 36.6%). CV symptoms occurred predominantly during the ovulatory and luteal phases. Meanwhile, VVC episodes were not concentrated premenstrually, but rather occurred throughout the menstrual cycle. Significant differences were found in the vaginal pH, discharge characteristics and frequency of inflammatory symptoms between the 2 groups. CV is clinically important, because it is a common cause of recurrent vulvovaginitis. To distinguish CV from VVC, gynecologists should consider the patient's medical history, physical and laboratory findings, vaginal pH and vaginal discharge characteristics. © 2016 S. Karger AG, Basel.

Prognostic significance of smoking in addition to established risk factors in patients with Dukes B and C colorectal cancer: a retrospective analysis.

PubMed

Diamantis, N; Xynos, I D; Amptulah, S; Karadima, M; Skopelitis, H; Tsavaris, N

2013-01-01

To investigate the prognostic significance of smoking in addition to established risk factors in patients with Dukes stage B and C colorectal cancer (CRC). 291 consecutive non-selected CRC patients were studied retrospectively. Twenty-three variables were examined using a regression statistical model to identify relevant prognostic factors related to disease free survival (DFS) and overall survival (OS). On multivariate analysis DFS was found to be negatively affected in patients with a smoking history of ≤10 pack-years vs. non-smokers (p<0.016). Additionally, performance status (PS)<90 (p<0.001), Dukes stage C (p<0.001) and elevated tumor markers (p<0.001) at the time of diagnosis were found to adversely affect DFS. Smoking also had a significant association with relapse. Patients with a smoking history of ≤10 pack-years had 2.45 (p<0.018) higher risk of recurrence compared to patients with no smoking history. OS was influenced by Karnofsky performance status (PS), Dukes stage, and elevated tumor markers. In particular patients with PS< 90 had a 4.69-fold higher risk of death (p<0.001) than patients with better PS. Stage C disease was associated with 2.27-fold higher risk of death (p<0.001) than stage B disease, and patients with elevated tumor markers at the time of diagnosis had 2.74-fold higher risk of death (p<0.014) when compared to those whose tumor markers were normal at presentation. Our study associates smoking and relapse incidence in non-clinical- trial CRC patients and reiterates the prognostic significance of PS, stage and tumor markers at the time of diagnosis.

[Effects of water levels and the additions of different nitrogen forms on soil net nitrogen transformation rate and N2O emission in subtropical forest soils].

PubMed

Ma, Fen; Ma, Hong-liang; Qiu, Hong; Yang, Hong-yu

2015-02-01

An incubation experiment was conducted to investigate the effects of the additions of different nitrogen forms on nitrogen transformation in red soils of subtropical forest under soil moisture conditions with 40%, 70% and 110% of water holding capacity (WHC). The results showed that soil net mineralization and ammonification rates were maximum at 70% WHC and minimum at 40% WHC. Compared with the control, the addition of NO(3-)-N decreased the soil net mineralization and ammonification rates by 56.1% and 43.0% under 70% WHC condition, and decreased by 68.2% and 19.0% under 110% WHC, respectively. However, the proportion of ammonification to mineralization increased at 70% and 110% WHC, which suggested that nitrate addition inhibited the nitrification. With addition of NO(3-)-N at 110% WHC, the net nitrification rate was lowest while N20 emission was highest with the concomitant decrease of nitrate content, indicating that N2O emission was largely derived from denitrification. However, at 40% WHC and 70% WHC, the maximum N20 flux was found at the early stage of incubation. Even with addition of NH(4+)-N and NO(3-)-N, N2O flux did not change much at the latter stage of incubation, indicating that autotrophic nitrification was dominant for N20 production at the early stage of incubation. Under 40% WHC condition, soluble organic carbon increased more and it increased largely with NH(4+)-N addition, which meant NH(4+)-N addition could enhance the mineralization of soil organic matter. Under 40% and 110% WHC conditions, the addition of NH(4+)-N increased significantly the soil soluble organic nitrogen (SON) by 73.6% and 176.6% compared with the control, respectively. A significant increase of 78.7% for SON was only found at 40% WHC under addition of NO(3-)-N compared with the control. These results showed that high soil moisture condition and addition of NH(4+)-N were of benefit to SON formation.

Transcatheter closure of hemodynamic significant patent ductus arteriosus in 32 premature infants by amplatzer ductal occluder additional size-ADOIIAS.

PubMed

Morville, Patrice; Akhavi, Ahmad

2017-10-01

The advent of Amplatzer Duct Occluder II additional Size (ADOIIAS) provided the potential to close hemodynamic significant patent ductus arteriosus (HSPDA) and to analyze the feasibility, safety and efficacy of the device. Treatment of a patent ductus arteriosus (PDA) in very premature neonates is still a dilemma for the neonatalogist who has to consider its significance and has to choose among different treatment options. Because surgical ligation and medical therapy both have their drawbacks, interventional catheterization might provide an alternative means of closing HSPDA. Between September 2013 and June 2015, 32 premature infants with complications related to HSPDA defined by ultrasound (US) underwent transcatheter closure. The procedure was performed in the catheterization laboratory by venous cannulation without angiography. The position of the occluder was directed by X-ray and US. In particular we looked at procedural details, device size selection, complications, and short and mid-term outcomes. Thirty two premature infants, all of whom had clinical complications related to HSPDA, born at gestational ages ranging between 23.6 and 36 weeks (mean ± standard deviation 28 ± 3 weeks) underwent attempted transcatheter PDA closure using the ADOIIAS. Their mean age and weight at the time of procedure was 25 days (range 8-70 days) and 1373 g (range 680-2480 g), respectively. Ten infants weighed ≤1,000g. All ducts were tubular. The mean PDA and device waist diameters were 3.2 ± 0.6mm (range 2.2-4) and 4.4 ± 0.6 mm, respectively, and the mean PDA and device lengths 5.2 ± 2.0 mm (range 2-10) and 3.4 ± 1.3 mm. Median fluoroscopy and procedural times were 11 min (range 3-24) and 28 min (range 10-90), respectively. Complete closure was achieved in all but one patient. There was no device migration. A left pulmonary artery (LPA) obstruction developed in one patient. Five infants died. Four deaths were related to complications of

Do reading additions improve reading in pre-presbyopes with low vision?

PubMed

Alabdulkader, Balsam; Leat, Susan

2012-09-01

This study compared three different methods of determining a reading addition and the possible improvement on reading performance in children and young adults with low vision. Twenty-eight participants with low vision, aged 8 to 32 years, took part in the study. Reading additions were determined with (a) a modified Nott dynamic retinoscopy, (b) a subjective method, and (c) an age-based formula. Reading performance was assessed with MNREAD-style reading charts at 12.5 cm, with and without each reading addition in random order. Outcome measures were reading speed, critical print size, MNREAD threshold, and the area under the reading speed curve. For the whole group, there was no significant improvement in reading performance with any of the additions. When participants with normal accommodation at 12.5 cm were excluded, the area under the reading speed curve was significantly greater with all reading additions compared with no addition (p = 0.031, 0.028, and 0.028, respectively). Also, the reading acuity threshold was significantly better with all reading additions compared with no addition (p = 0.014, 0.030, and 0.036, respectively). Distance and near visual acuity, age, and contrast sensitivity did not predict improvement with a reading addition. All, but one, of the participants who showed a significant improvement in reading with an addition had reduced accommodation. A reading addition may improve reading performance for young people with low vision and should be considered as part of a low vision assessment, particularly when accommodation is reduced.

Microstructure characterisation of Ti-6Al-4V from different additive manufacturing processes

NASA Astrophysics Data System (ADS)

Neikter, M.; Åkerfeldt, P.; Pederson, R.; Antti, M.-L.

2017-10-01

The focus of this work has been microstructure characterisation of Ti-6Al-4V manufactured by five different additive manufacturing (AM) processes. The microstructure features being characterised are the prior β size, grain boundary α and α lath thickness. It was found that material manufactured with powder bed fusion processes has smaller prior β grains than the material from directed energy deposition processes. The AM processes with fast cooling rate render in thinner α laths and also thinner, and in some cases discontinuous, grain boundary α. Furthermore, it has been observed that material manufactured with the directed energy deposition processes has parallel bands, except for one condition when the parameters were changed, while the powder bed fusion processes do not have any parallel bands.

Barnacle geese achieve significant energetic savings by changing posture.

PubMed

Tickle, Peter G; Nudds, Robert L; Codd, Jonathan R

2012-01-01

Here we report the resting metabolic rate in barnacle geese (Branta leucopsis) and provide evidence for the significant energetic effect of posture. Under laboratory conditions flow-through respirometry together with synchronous recording of behaviour enabled a calculation of how metabolic rate varies with posture. Our principal finding is that standing bipedally incurs a 25% increase in metabolic rate compared to birds sitting on the ground. In addition to the expected decrease in energy consumption of hindlimb postural muscles when sitting, we hypothesise that a change in breathing mechanics represents one potential mechanism for at least part of the observed difference in energetic cost. Due to the significant effect of posture, future studies of resting metabolic rates need to take into account and/or report differences in posture.

Spore populations among bulk tank raw milk and dairy powders are significantly different.

PubMed

Miller, Rachel A; Kent, David J; Watterson, Matthew J; Boor, Kathryn J; Martin, Nicole H; Wiedmann, Martin

2015-12-01

To accommodate stringent spore limits mandated for the export of dairy powders, a more thorough understanding of the spore species present will be necessary to develop prospective strategies to identify and reduce sources (i.e., raw materials or in-plant) of contamination. We characterized 1,523 spore isolates obtained from bulk tank raw milk (n=33 farms) and samples collected from 4 different dairy powder-processing plants producing acid whey, nonfat dry milk, sweet whey, or whey protein concentrate 80. The spores isolated comprised 12 genera, at least 44 species, and 216 rpoB allelic types. Bacillus and Geobacillus represented the most commonly isolated spore genera (approximately 68.9 and 12.1%, respectively, of all spore isolates). Whereas Bacillus licheniformis was isolated from samples collected from all plants and farms, Geobacillus spp. were isolated from samples from 3 out of 4 plants and just 1 out of 33 farms. We found significant differences between the spore population isolated from bulk tank raw milk and those isolated from dairy powder plant samples, except samples from the plant producing acid whey. A comparison of spore species isolated from raw materials and finished powders showed that although certain species, such as B. licheniformis, were found in both raw and finished product samples, other species, such as Geobacillus spp. and Anoxybacillus spp., were more frequently isolated from finished powders. Importantly, we found that 8 out of 12 genera were isolated from at least 2 different spore count methods, suggesting that some spore count methods may provide redundant information if used in parallel. Together, our results suggest that (1) Bacillus and Geobacillus are the predominant spore contaminants in a variety of dairy powders, implying that future research efforts targeted at elucidating approaches to reduce levels of spores in dairy powders should focus on controlling levels of spore isolates from these genera; and (2) the spore

Significance analysis of the regional differences on icing time of water onto fire protective clothing

NASA Astrophysics Data System (ADS)

Zhao, L. Z.; Jing, L. S.; Zhang, X. Z.; Xia, J. J.; Chen, Y.; Chen, T.; Hu, C.; Bao, Z. M.; Fu, X. C.; Wang, R. J.; Wang, Y.; Wang, Y. J.

2017-09-01

The object of this work was to determine the icing temperature in icing experiment. Firstly, a questionnaire investigation was carried out on 38 fire detachments in different regions. These Statistical percentage results were divided into northern east group and northern west group. Secondly, a significance analysis between these two results was made using Mann-Whitney U test. Then the icing temperature was determined in different regions. Thirdly, the icing experiment was made in the environment of -20°C in Daxing’an Mountain. The anti-icing effect of new fire protective clothing was verified in this icing.

Two distinct groups within the Bacillus subtilis group display significantly different spore heat resistance properties.

PubMed

Berendsen, Erwin M; Zwietering, Marcel H; Kuipers, Oscar P; Wells-Bennik, Marjon H J

2015-02-01

The survival of bacterial spores after heat treatment and the subsequent germination and outgrowth in a food product can lead to spoilage of the food product and economical losses. Prediction of time-temperature conditions that lead to sufficient inactivation requires access to detailed spore thermal inactivation kinetics of relevant model strains. In this study, the thermal inactivation kinetics of spores of fourteen strains belonging to the Bacillus subtilis group were determined in detail, using both batch heating in capillary tubes and continuous flow heating in a micro heater. The inactivation data were fitted using a log linear model. Based on the spore heat resistance data, two distinct groups (p < 0.001) within the B. subtilis group could be identified. One group of strains had spores with an average D120 °C of 0.33 s, while the spores of the other group displayed significantly higher heat resistances, with an average D120 °C of 45.7 s. When comparing spore inactivation data obtained using batch- and continuous flow heating, the z-values were significantly different, hence extrapolation from one system to the other was not justified. This study clearly shows that heat resistances of spores from different strains in the B. subtilis group can vary greatly. Strains can be separated into two groups, to which different spore heat inactivation kinetics apply. Copyright © 2014 Elsevier Ltd. All rights reserved.

A comparative study of additive and subtractive manufacturing for dental restorations.

PubMed

Bae, Eun-Jeong; Jeong, Il-Do; Kim, Woong-Chul; Kim, Ji-Hwan

2017-08-01

Digital systems have recently found widespread application in the fabrication of dental restorations. For the clinical assessment of dental restorations fabricated digitally, it is necessary to evaluate their accuracy. However, studies of the accuracy of inlay restorations fabricated with additive manufacturing are lacking. The purpose of this in vitro study was to evaluate and compare the accuracy of inlay restorations fabricated by using recently introduced additive manufacturing with the accuracy of subtractive methods. The inlay (distal occlusal cavity) shape was fabricated using 3-dimensional image (reference data) software. Specimens were fabricated using 4 different methods (each n=10, total N=40), including 2 additive manufacturing methods, stereolithography apparatus and selective laser sintering; and 2 subtractive methods, wax and zirconia milling. Fabricated specimens were scanned using a dental scanner and then compared by overlapping reference data. The results were statistically analyzed using a 1-way analysis of variance (α=.05). Additionally, the surface morphology of 1 randomly (the first of each specimen) selected specimen from each group was evaluated using a digital microscope. The results of the overlap analysis of the dental restorations indicated that the root mean square (RMS) deviation observed in the restorations fabricated using the additive manufacturing methods were significantly different from those fabricated using the subtractive methods (P<.05). However, no significant differences were found between restorations fabricated using stereolithography apparatus and selective laser sintering, the additive manufacturing methods (P=.466). Similarly, no significant differences were found between wax and zirconia, the subtractive methods (P=.986). The observed RMS values were 106 μm for stereolithography apparatus, 113 μm for selective laser sintering, 116 μm for wax, and 119 μm for zirconia. Microscopic evaluation of the surface

Effect of addition of different nano-clays on the fumed silica-polyethylene glycol based shear-thickening fluids

NASA Astrophysics Data System (ADS)

Singh, Mansi; Mehta, Rajeev; Verma, Sanjeev K.; Biswas, Ipsita

2018-01-01

A comparative study of the rheology of shear thickening suspensions of 20% fumed silica in polyethylene glycol (PEG200) with different nano clays as additives has been done. The nano-clays used are montmorillonite (MMT), Closite15A, Kaolin and Halloysite clay. The objective was to study the effect of relatively cost-effective clays as a partial substitute of silica. Specifically, the effect of type, concentration, temperature and frequency were considered. The results indicate that the shear thickening properties of Closite15A as additive in temperature ranges of 25 °C-45 °C performs the best and Halloysite performs best at higher (55 °C) and lower temperatures (5, 15 °C). The elasticity effects in dynamic experiments were markedly enhanced by Halloysite clay addition. Addition of MMT, however, led to insignificant enhancement in critical viscosity in steady-state as well as dynamic state-rheology. Interestingly, shear thickening fluid (STF) with all clay except MMT was stable after storing for more than a month. These findings indicate that the introduction of nano-clay as additives is a promising and cost effective method for enhancing the STF behavior which can be utilized in high impact resistant (about 3000% strain and 300 rad s-1 frequency) applications.

Significant differences in parameters of glucose metabolism in children of hypertensive and normotensive parents.

PubMed

Gryko, Anna; Głowińska-Olszewska, Barbara; Płudowska, Katarzyna; Smithson, W Henry; Owłasiuk, Anna; Żelazowska-Rutkowska, Beata; Wojtkielewicz, Katarzyna; Milewski, Robert; Chlabicz, Sławomir

2017-01-01

In the recent years, alterations in the carbohydrate metabolism, including insulin resistance, are considered as risk factors in the development of hypertension and its complications in young age. Hypertension is associated with significant cardiovascular morbidity and mortality. The onset of pathology responsible for the development of hypertension, as well as levels of biomarkers specific for early stages of atherosclerosis are poorly understood. To compare a group of children whose parents have a history of hypertension (study group) with a group of children with normotensive parents (reference group), with consideration of typical risk factors for atherosclerosis, parameters of lipid and carbohydrate metabolism, anthropometric data and new biomarkers of early cardiovascular disease (hsCRP, adiponectin, sICAM-1). The study population consists of 84 children. Of these, 40 children (mean age 13.6±2.7 years) had a parental history of hypertension, and 44 aged 13.1±3.7 yrs were children of normotensive parents. Anthropometric measurements were taken, and measurements of blood pressure, lipid profile, glucose and insulin levels were carried out. The insulin resistance index (HOMA IR) was calculated. Levels of hsCRP, soluble cell adhesion molecules (sICAM) and adiponectin were measured. There were no statistically significant differences in anthropometric parameters (body mass, SDS BMI, skin folds) between groups. Values of systolic blood pressure were statistically significantly higher in the study group (Me 108 vs. 100 mmHg, p= 0.031), as were glycaemia (Me 80 vs. 67 mg/dl p<0.001) and insulinaemia levels (Me 8.89 vs. 5.34 µIU/ml, p=0.024). Higher, statistically significant values of HOMA IR were found in the study group (children of hypertensive parents) (Me 1.68 vs. 0.80 mmol/l × mU/l, p=0.007). Lower adiponectin levels (Me 13959.45 vs. 16822 ng/ml, p=0.020) were found in children with a family history of hypertension. No significant differences were found in

Elite Junior Australian Football Players Experience Significantly Different Loads Across Levels of Competition and Training Modes.

PubMed

Lathlean, Timothy J H; Gastin, Paul B; Newstead, Stuart; Finch, Caroline F

2018-07-01

Lathlean, TJH, Gastin, PB, Newstead, S, and Finch, CF. Elite junior Australian football players experience significantly different loads across levels of competition and training modes. J Strength Cond Res 32(7): 2031-2038, 2018-Well-developed physical qualities such as high jumping ability, running endurance, acceleration, and speed can help aspiring junior elite Australian football (AF) players transition to the Australian Football League competition. To do so, players need to experience sufficient load to enhance their physical resilience without increasing their risk of negative outcomes in terms of impaired wellness or injury. The aim of this study was to investigate the differences in load for different levels of competition and training modes across one competitive season. Elite junior AF players (n = 562, aged 17.7 ± 0.3, range: 16-18 years) were recruited from 9 teams across the under-18 state league competition in Victoria. All players recorded their training and match intensities according to the session rating of perceived exertion method. Training sessions were categorized according to skills, strength, conditioning, and other activities, whereas matches were identified according to level of competition. The loads in U18 state league matches (656.7 ± 210.9 au) were significantly higher (p = 0.027) than those in school matches (643.3 ± 260.9 au) and those in U18 representative matches (617.2 ± 175.4). Players, who undertook more than one match per week, experienced significantly less load in subsequent matches (p < 0.001). Furthermore, U18 state league training sessions carried the most load when compared with other training modes. This article highlights that different combinations of training and match involvement affect overall player load, which may predispose players to negative outcomes such as impaired wellness or increased injury risk.

Comprehensive molecular profiling of 718 Multiple Myelomas reveals significant differences in mutation frequencies between African and European descent cases

PubMed Central

Christofferson, Austin; Aldrich, Jessica; Jewell, Scott; Kittles, Rick A.; Derome, Mary; Craig, David Wesley; Carpten, John D.

2017-01-01

Multiple Myeloma (MM) is a plasma cell malignancy with significantly greater incidence and mortality rates among African Americans (AA) compared to Caucasians (CA). The overall goal of this study is to elucidate differences in molecular alterations in MM as a function of self-reported race and genetic ancestry. Our study utilized somatic whole exome, RNA-sequencing, and correlated clinical data from 718 MM patients from the Multiple Myeloma Research Foundation CoMMpass study Interim Analysis 9. Somatic mutational analyses based upon self-reported race corrected for ancestry revealed significant differences in mutation frequency between groups. Of interest, BCL7A, BRWD3, and AUTS2 demonstrate significantly higher mutation frequencies among AA cases. These genes are all involved in translocations in B-cell malignancies. Moreover, we detected a significant difference in mutation frequency of TP53 and IRF4 with frequencies higher among CA cases. Our study provides rationale for interrogating diverse tumor cohorts to best understand tumor genomics across populations. PMID:29166413

Barnacle Geese Achieve Significant Energetic Savings by Changing Posture

PubMed Central

Tickle, Peter G.; Nudds, Robert L.; Codd, Jonathan R.

2012-01-01

Here we report the resting metabolic rate in barnacle geese (Branta leucopsis) and provide evidence for the significant energetic effect of posture. Under laboratory conditions flow-through respirometry together with synchronous recording of behaviour enabled a calculation of how metabolic rate varies with posture. Our principal finding is that standing bipedally incurs a 25% increase in metabolic rate compared to birds sitting on the ground. In addition to the expected decrease in energy consumption of hindlimb postural muscles when sitting, we hypothesise that a change in breathing mechanics represents one potential mechanism for at least part of the observed difference in energetic cost. Due to the significant effect of posture, future studies of resting metabolic rates need to take into account and/or report differences in posture. PMID:23071672

Physical evaluations of Co-Cr-Mo parts processed using different additive manufacturing techniques

NASA Astrophysics Data System (ADS)

Ghani, Saiful Anwar Che; Mohamed, Siti Rohaida; Harun, Wan Sharuzi Wan; Noar, Nor Aida Zuraimi Md

2017-12-01

In recent years, additive manufacturing with highly design customization has gained an important technique for fabrication in aerospace and medical fields. Despite the ability of the process to produce complex components with highly controlled architecture geometrical features, maintaining the part's accuracy, ability to fabricate fully functional high density components and inferior surfaces quality are the major obstacles in producing final parts using additive manufacturing for any selected application. This study aims to evaluate the physical properties of cobalt chrome molybdenum (Co-Cr-Mo) alloys parts fabricated by different additive manufacturing techniques. The full dense Co-Cr-Mo parts were produced by Selective Laser Melting (SLM) and Direct Metal Laser Sintering (DMLS) with default process parameters. The density and relative density of samples were calculated using Archimedes' principle while the surface roughness on the top and side surface was measured using surface profiler. The roughness average (Ra) for top surface for SLM produced parts is 3.4 µm while 2.83 µm for DMLS produced parts. The Ra for side surfaces for SLM produced parts is 4.57 µm while 9.0 µm for DMLS produced parts. The higher Ra values on side surfaces compared to the top faces for both manufacturing techniques was due to the balling effect phenomenon. The yield relative density for both Co-Cr-Mo parts produced by SLM and DMLS are 99.3%. Higher energy density has influence the higher density of produced samples by SLM and DMLS processes. The findings of this work demonstrated that SLM and DMLS process with default process parameters have effectively produced full dense parts of Co-Cr-Mo with high density, good agreement of geometrical accuracy and better surface finish. Despite of both manufacturing process yield that produced components with higher density, the current finding shows that SLM technique could produce components with smoother surface quality compared to DMLS

Marker-Based Estimates Reveal Significant Non-additive Effects in Clonally Propagated Cassava (Manihot esculenta): Implications for the Prediction of Total Genetic Value and the Selection of Varieties.

PubMed

Wolfe, Marnin D; Kulakow, Peter; Rabbi, Ismail Y; Jannink, Jean-Luc

2016-08-31

In clonally propagated crops, non-additive genetic effects can be effectively exploited by the identification of superior genetic individuals as varieties. Cassava (Manihot esculenta Crantz) is a clonally propagated staple food crop that feeds hundreds of millions. We quantified the amount and nature of non-additive genetic variation for three key traits in a breeding population of cassava from sub-Saharan Africa using additive and non-additive genome-wide marker-based relationship matrices. We then assessed the accuracy of genomic prediction for total (additive plus non-additive) genetic value. We confirmed previous findings based on diallel populations, that non-additive genetic variation is significant for key cassava traits. Specifically, we found that dominance is particularly important for root yield and epistasis contributes strongly to variation in CMD resistance. Further, we showed that total genetic value predicted observed phenotypes more accurately than additive only models for root yield but not for dry matter content, which is mostly additive or for CMD resistance, which has high narrow-sense heritability. We address the implication of these results for cassava breeding and put our work in the context of previous results in cassava, and other plant and animal species. Copyright © 2016 Author et al.

Children's patterns of reasoning about reading and addition concepts.

PubMed

Farrington-Flint, Lee; Canobi, Katherine H; Wood, Clare; Faulkner, Dorothy

2010-06-01

Children's reasoning was examined within two educational contexts (word reading and addition) so as to understand the factors that contribute to relational reasoning in the two domains. Sixty-seven 5- to 7-year-olds were given a series of related words to read or single-digit addition items to solve (interspersed with unrelated items). The frequency, accuracy, and response times of children's self-reports on the conceptually related items provided a measure of relational reasoning, while performance on the unrelated addition and reading items provided a measure of procedural skill. The results indicated that the children's ability to use conceptual relations to solve both reading and addition problems enhanced speed and accuracy levels, increased with age, and was related to procedural skill. However, regression analyses revealed that domain-specific competencies can best explain the use of conceptual relations in both reading and addition. Moreover, a cluster analysis revealed that children differ according to the academic domain in which they first apply conceptual relations and these differences are related to individual variation in their procedural skills within these particular domains. These results highlight the developmental significance of relational reasoning in the context of reading and addition and underscore the importance of concept-procedure links in explaining children's literacy and arithmetical development.

[Effects of nitrogen additions on soil hydrolase and oxidase activities in Pinus elliottii plantations.

PubMed

Zhang, Chuang; Zou, Hong Tao; Zhang, Xin Yu; Kou, Liang; Yang, Yang; Sun, Xiao Min; Li, Sheng Gong; Wang, Hui Min

2016-11-18

We evaluated responses of hydrolase and oxidase activities in a subtropical Pinus elliottii plantation through a nitrogen (N) addition field experiment (dosage level: 0, 40, 120 kg N·hm -2 ·a -1 ). The results showed that N additions significantly decreased the carbon, nitrogen and phosphorus related hydrolase and oxidase activities. The activities of β-1,4-glucosidase (BG), cellobiohydrolase (CBH), β-1,4-N-acetylglucosaminidase (NAG) and peroxidase (PER) activities were decreased by 16.5%-51.1% due to N additions, and the decrease was more remarkable in the higher N addition treatment. The activities of α-1,4-glucosidase (aG), β-1,4-xylosidase (BX), acid phosphatase (AP) and phenol oxidase (PPO) were decreased by 14.5%-38.6% by N additions, however, there was no significant difference among the different N addition treatments. Soil enzyme activities varied obviously in different seasons. The activities of BG, NAG, BX, CBH, AP and PPO were in the order of March > June > October, and aG and PER activities were in the order of October > March > June. Most of the soil hydrolase and oxidase activities were positively correlated with soil pH, but negatively with NO 3 - -N content. It indicated that N additions inhibited soil hydrolase and oxidase activities by reducing soil pH and increasing soil nitrification. N additions inhibited the soil organic matter mineralization and turnover in the subtropical area, and the effects were obvious with the increasing dosage of N additions.

Gender differences in binaural speech-evoked auditory brainstem response: are they clinically significant?

PubMed

Jalaei, Bahram; Azmi, Mohd Hafiz Afifi Mohd; Zakaria, Mohd Normani

2018-05-17

Binaurally evoked auditory evoked potentials have good diagnostic values when testing subjects with central auditory deficits. The literature on speech-evoked auditory brainstem response evoked by binaural stimulation is in fact limited. Gender disparities in speech-evoked auditory brainstem response results have been consistently noted but the magnitude of gender difference has not been reported. The present study aimed to compare the magnitude of gender difference in speech-evoked auditory brainstem response results between monaural and binaural stimulations. A total of 34 healthy Asian adults aged 19-30 years participated in this comparative study. Eighteen of them were females (mean age=23.6±2.3 years) and the remaining sixteen were males (mean age=22.0±2.3 years). For each subject, speech-evoked auditory brainstem response was recorded with the synthesized syllable /da/ presented monaurally and binaurally. While latencies were not affected (p>0.05), the binaural stimulation produced statistically higher speech-evoked auditory brainstem response amplitudes than the monaural stimulation (p<0.05). As revealed by large effect sizes (d>0.80), substantive gender differences were noted in most of speech-evoked auditory brainstem response peaks for both stimulation modes. The magnitude of gender difference between the two stimulation modes revealed some distinct patterns. Based on these clinically significant results, gender-specific normative data are highly recommended when using speech-evoked auditory brainstem response for clinical and future applications. The preliminary normative data provided in the present study can serve as the reference for future studies on this test among Asian adults. Copyright © 2018 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

Parent socialization effects in different cultures: significance of directive parenting.

PubMed

Sorkhabi, Nadia

2012-06-01

In this article, the controversy of divergent findings in research on parental socialization effects in different cultures is addressed. Three explanations intended to address divergent findings of socialization effects in different cultures, as advanced by researchers who emphasize cultural differences, are discussed. These include cultural differences in socialization values and goals of parents, parental emotional and cognitive characteristics associated with parenting styles, and adolescents' interpretations or evaluations of their parents' parenting styles. The empirical evidence for and against each of these arguments is examined and an alternative paradigm for understanding and empirical study of developmental outcomes associated with parenting styles in different cultures is suggested. Baumrind's directive parenting style is presented as an alternative to the authoritarian parenting style in understanding the positive developmental effects associated with "strict" parenting in cultures said to have a collectivist orientation. Directions for research on the three explanations are mentioned.

Effect of CaO2 addition on anaerobic digestion of waste activated sludge at different temperatures and the promotion of valuable carbon source production under ambient condition.

PubMed

Ping, Qian; Lu, Xiao; Zheng, Ming; Li, Yongmei

2018-06-06

The effect of calcium peroxide (CaO 2 ) addition on anaerobic digestion (AD) of waste activated sludge (WAS) at different temperatures (20 °C, 35 °C, and 55 °C) were investigated. The results show that CaO 2 addition had significant positive effect on short-chain fatty acids (SCFAs) production under ambient and mesophilic conditions. Polysaccharides and proteins embedded in extracellular polymeric substances (EPS) were effectively released from inner fraction to outer fraction, and non-biodegradable humic-like substances were decreased while easily biodegradable tryptophan-like proteins increased. These effects were most remarkable under ambient conditions. However, CaO 2 addition was unfavorable to thermophilic AD because of high free ammonia concentrations and the accumulation of humic-like substances. Temperature showed a stronger effect than CaO 2 on microbial community structure, but CaO 2 addition was more effective than temperature in enhancing hydrolytic and acidifying microorganisms. Predictive functional profiling indicated that microbial hydrolysis, metabolism and acidification were promoted by CaO 2 under ambient conditions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Medial Longitudinal Arch Angle Presents Significant Differences Between Foot Types: A Biplane Fluoroscopy Study.

PubMed

Balsdon, Megan E R; Bushey, Kristen M; Dombroski, Colin E; LeBel, Marie-Eve; Jenkyn, Thomas R

2016-10-01

The structure of the medial longitudinal arch (MLA) affects the foot's overall function and its ability to dissipate plantar pressure forces. Previous research on the MLA includes measuring the calcaneal-first metatarsal angle using a static sagittal plane radiograph, a dynamic height-to-length ratio using marker clusters with a multisegment foot model, and a contained angle using single point markers with a multisegment foot model. The objective of this study was to use biplane fluoroscopy to measure a contained MLA angle between foot types: pes planus (low arch), pes cavus (high arch), and normal arch. Fifteen participants completed the study, five from each foot type. Markerless fluoroscopic radiostereometric analysis (fRSA) was used with a three-dimensional model of the foot bones and manually matching those bones to a pair of two-dimensional radiographic images during midstance of gait. Statistically significant differences were found between barefoot arch angles of the normal and pes cavus foot types (p = 0.036), as well as between the pes cavus and pes planus foot types (p = 0.004). Dynamic walking also resulted in a statistically significant finding compared to the static standing trials (p = 0.014). These results support the classification of individuals following a physical assessment by a foot specialist for those with pes cavus and planus foot types. The differences between static and dynamic kinematic measurements were also supported using this novel method.

Human papillomavirus detection with genotyping by the cobas and Aptima assays: Significant differences in HPV 16 detection?

PubMed

Chorny, Joseph A; Frye, Teresa C; Fisher, Beth L; Remmers, Carol L

2018-03-23

The primary high-risk human papillomavirus (hrHPV) assays in the United States are the cobas (Roche) and the Aptima (Hologic). The cobas assay detects hrHPV by DNA analysis while the Aptima detects messenger RNA (mRNA) oncogenic transcripts. As the Aptima assay identifies oncogenic expression, it should have a lower rate of hrHPV and genotype detection. The Kaiser Permanente Regional Reference Laboratory in Denver, Colorado changed its hrHPV assay from the cobas to the Aptima assay. The rates of hrHPV detection and genotyping were compared over successive six-month periods. The overall hrHPV detection rates by the two platforms were similar (9.5% versus 9.1%) and not statistically different. For genotyping, the HPV 16 rate by the cobas was 1.6% and by the Aptima it was 1.1%. These differences were statistically different with the Aptima detecting nearly one-third less HPV 16 infections. With the HPV 18 and HPV 18/45, there was a slightly higher detection rate of HPV 18/45 by the Aptima platform (0.5% versus 0.9%) and this was statistically significant. While HPV 16 represents a low percentage of hrHPV infections, it was detected significantly less by the Aptima assay compared to the cobas assay. This has been previously reported, although not highlighted. Given the test methodologies, one would expect the Aptima to detect less HPV 16. This difference appears to be mainly due to a significantly increased number of non-oncogenic HPV 16 infections detected by the cobas test as there were no differences in HPV 16 detection rates in the high-grade squamous intraepithelial lesions indicating that the two tests have similar sensitivities for oncogenic HPV 16. © 2018 Wiley Periodicals, Inc.

Fatigue in airline pilots after an additional day's layover period.

PubMed

Powell, David M C; Spencer, Mick B; Petrie, Keith J

2010-11-01

We investigated the effect of an additional day's layover on reducing fatigue in two different duties: a two-pilot crew flying between Auckland and Brisbane, and a three-pilot crew flying between Auckland and Los Angeles. Pilots completed a reaction time task, the Samn-Perelli fatigue scale, and the Karolinska Sleepiness Scale on both outward and return flights. The flights were conducted with and without a 1-d layover (Brisbane) and with a 1- or 2-d layover (Los Angeles). On the Brisbane route, the addition of a layover resulted in a significant reduction of fatigue, sleepiness, and reaction time. At top of descent, Samn-Perelli fatigue was reduced from over 5.0 to under 4.5. In contrast, the addition of an extra day layover in Los Angeles had no significant effect on the same measures during the return flight; on both flights Samn-Perelli fatigue was over 5.0 at top of descent. The results suggest that the addition of an extra night's layover has different effects depending on the type of operation. Layover periods need to ensure adequate opportunity to recover from any sleep deficit arising from the outbound journey, but the benefit of increased layover time may be limited if time-zone shifts cause a mismatch between local time and the circadian rhythm of sleep.

Combustion and gasification characteristics of chars from four commercially significant coals of different rank. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nsakala, N.Y.; Patel, R.L.; Lao, T.C.

1982-09-01

The combustion and gasification kinetics of four size graded coal chars were investigated experimentally in Combustion Engineering's Drop Tube Furnace System (DTFS). The chars were prepared in the DTFS from commercially significant coals representing a wide range of rank; these included a Pittsburgh No. 8 Seam hvAb coal, an Illinois No. 6 Seam hvCb coal, a Wyoming Sub C, and a Texas Lignite A. Additionally, a number of standard ASTM and special bench scale tests were performed on the coals and chars to characterize their physicochemical properties. Results showed that the lower rank coal chars were more reactive than themore » higher rank coal chars and that combustion reactions of chars were much faster than the corresponding gasification reactions. Fuel properties, temperature, and reactant gas partial pressure had a significant influence on both combustion and gasification, and particle size had a mild but discernible influence on gasification. Fuel reactivities were closely related to pore structure. Computer simulation of the combustion and gasification performances of the subject samples in the DTFS supported the experimental findings.« less

Addition of sodium caseinate to skim milk increases nonsedimentable casein and causes significant changes in rennet-induced gelation, heat stability, and ethanol stability.

PubMed

Lin, Yingchen; Kelly, Alan L; O'Mahony, James A; Guinee, Timothy P

2017-02-01

The protein content of skim milk was increased from 3.3 to 4.1% (wt/wt) by the addition of a blend of skim milk powder and sodium caseinate (NaCas), in which the weight ratio of skim milk powder to NaCas was varied from 0.8:0.0 to 0.0:0.8. Addition of NaCas increased the levels of nonsedimentable casein (from ∼6 to 18% of total casein) and calcium (from ∼36 to 43% of total calcium) and reduced the turbidity of the fortified milk, to a degree depending on level of NaCas added. Rennet gelation was adversely affected by the addition of NaCas at 0.2% (wt/wt) and completely inhibited at NaCas ≥0.4% (wt/wt). Rennet-induced hydrolysis was not affected by added NaCas. The proportion of total casein that was nonsedimentable on centrifugation (3,000 × g, 1 h, 25°C) of the rennet-treated milk after incubation for 1 h at 31°C increased significantly on addition of NaCas at ≥0.4% (wt/wt). Heat stability in the pH range 6.7 to 7.2 and ethanol stability at pH 6.4 were enhanced by the addition of NaCas. It is suggested that the negative effect of NaCas on rennet gelation is due to the increase in nonsedimentable casein, which upon hydrolysis by chymosin forms into small nonsedimentable particles that physically come between, and impede the aggregation of, rennet-altered para-casein micelles, and thereby inhibit the development of a gel network. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Frequencies of polymorphisms associated with BSE resistance differ significantly between Bos taurus, Bos indicus, and composite cattle

PubMed Central

Brunelle, Brian W; Greenlee, Justin J; Seabury, Christopher M; Brown, Charles E; Nicholson, Eric M

2008-01-01

Background Transmissible spongiform encephalopathies (TSEs) are neurodegenerative diseases that affect several mammalian species. At least three factors related to the host prion protein are known to modulate susceptibility or resistance to a TSE: amino acid sequence, atypical number of octapeptide repeats, and expression level. These factors have been extensively studied in breeds of Bos taurus cattle in relation to classical bovine spongiform encephalopathy (BSE). However, little is currently known about these factors in Bos indicus purebred or B. indicus × B. taurus composite cattle. The goal of our study was to establish the frequency of markers associated with enhanced susceptibility or resistance to classical BSE in B. indicus purebred and composite cattle. Results No novel or TSE-associated PRNP-encoded amino acid polymorphisms were observed for B. indicus purebred and composite cattle, and all had the typical number of octapeptide repeats. However, differences were observed in the frequencies of the 23-bp and 12-bp insertion/deletion (indel) polymorphisms associated with two bovine PRNP transcription regulatory sites. Compared to B. taurus, B. indicus purebred and composite cattle had a significantly lower frequency of 23-bp insertion alleles and homozygous genotypes. Conversely, B. indicus purebred cattle had a significantly higher frequency of 12-bp insertion alleles and homozygous genotypes in relation to both B. taurus and composite cattle. The origin of these disparities can be attributed to a significantly different haplotype structure within each species. Conclusion The frequencies of the 23-bp and 12-bp indels were significantly different between B. indicus and B. taurus cattle. No other known or potential risk factors were detected for the B. indicus purebred and composite cattle. To date, no consensus exists regarding which bovine PRNP indel region is more influential with respect to classical BSE. Should one particular indel region and

Field evaluation of some bait additives against Indian crested porcupine (Hystrix indica) (Rodentia: Hystricidae).

PubMed

Mushtaq, Muhammad; Hussain, Iftikhar; Mian, Afsar; Munir, Shahid; Ahmed, Irfan; Khan, Abdul Aziz

2013-09-01

This research study evaluated the effect of different additives on the bait consumption by Indian crested porcupine, a serious forest and agricultural pest, under field conditions. Different additives (saccharin, common salt, bone meal, fish meal, peanut butter, egg yolk, egg shell powder, yeast powder, mineral oil and coconut oil) at 2 and 5% each were tested for their relative preference, using groundnut-maize (1:1) as basic bait. All the additives were tested under a no-choice test pattern. For control tests, no additive was mixed with the basic bait. Saccharin at 5% concentration significantly enhanced the consumption of bait over the basic bait, while 2% saccharin supplemented bait resulted in a non-significant bait consumption. All other additives did not enhance the consumption of the bait material; rather, these worked as repellents. However, the repellency was lowest with the common salt, followed by egg yolk, egg shell powder, bone meal, peanut butter, mineral oil, fish meal and yeast powder, while coconut remained the most repellent compound. The present study suggested that groundnut-maize (1:1) supplemented with 5% saccharin was the preferred bait combination, and can be used with different rodenticides for the management of Indian crested porcupine. © 2012 Wiley Publishing Asia Pty Ltd, ISZS and IOZ/CAS.

Nitrite addition to acidified sludge significantly improves digestibility, toxic metal removal, dewaterability and pathogen reduction

NASA Astrophysics Data System (ADS)

Du, Fangzhou; Keller, Jürg; Yuan, Zhiguo; Batstone, Damien J.; Freguia, Stefano; Pikaar, Ilje

2016-12-01

Sludge management is a major issue for water utilities globally. Poor digestibility and dewaterability are the main factors determining the cost for sludge management, whereas pathogen and toxic metal concentrations limit beneficial reuse. In this study, the effects of low level nitrite addition to acidified sludge to simultaneously enhance digestibility, toxic metal removal, dewaterability and pathogen reduction were investigated. Waste activated sludge (WAS) from a full-scale waste water treatment plant was treated at pH 2 with 10 mg NO2--N/L for 5 h. Biochemical methane potential tests showed an increase in the methane production of 28%, corresponding to an improvement from 247 ± 8 L CH4/kg VS to 317 ± 1 L CH4/kg VS. The enhanced removal of toxic metals further increased the methane production by another 18% to 360 ± 6 L CH4/kg VS (a total increase of 46%). The solids content of dewatered sludge increased from 14.6 ± 1.4% in the control to 18.2 ± 0.8%. A 4-log reduction for both total coliforms and E. coli was achieved. Overall, this study highlights the potential of acidification with low level nitrite addition as an effective and simple method achieving multiple improvements in terms of sludge management.

Nitrite addition to acidified sludge significantly improves digestibility, toxic metal removal, dewaterability and pathogen reduction

PubMed Central

Du, Fangzhou; Keller, Jürg; Yuan, Zhiguo; Batstone, Damien J.; Freguia, Stefano; Pikaar, Ilje

2016-01-01

Sludge management is a major issue for water utilities globally. Poor digestibility and dewaterability are the main factors determining the cost for sludge management, whereas pathogen and toxic metal concentrations limit beneficial reuse. In this study, the effects of low level nitrite addition to acidified sludge to simultaneously enhance digestibility, toxic metal removal, dewaterability and pathogen reduction were investigated. Waste activated sludge (WAS) from a full-scale waste water treatment plant was treated at pH 2 with 10 mg NO2−-N/L for 5 h. Biochemical methane potential tests showed an increase in the methane production of 28%, corresponding to an improvement from 247 ± 8 L CH4/kg VS to 317 ± 1 L CH4/kg VS. The enhanced removal of toxic metals further increased the methane production by another 18% to 360 ± 6 L CH4/kg VS (a total increase of 46%). The solids content of dewatered sludge increased from 14.6 ± 1.4% in the control to 18.2 ± 0.8%. A 4-log reduction for both total coliforms and E. coli was achieved. Overall, this study highlights the potential of acidification with low level nitrite addition as an effective and simple method achieving multiple improvements in terms of sludge management. PMID:28004811

Statistical significance of seasonal warming/cooling trends

NASA Astrophysics Data System (ADS)

Ludescher, Josef; Bunde, Armin; Schellnhuber, Hans Joachim

2017-04-01

The question whether a seasonal climate trend (e.g., the increase of summer temperatures in Antarctica in the last decades) is of anthropogenic or natural origin is of great importance for mitigation and adaption measures alike. The conventional significance analysis assumes that (i) the seasonal climate trends can be quantified by linear regression, (ii) the different seasonal records can be treated as independent records, and (iii) the persistence in each of these seasonal records can be characterized by short-term memory described by an autoregressive process of first order. Here we show that assumption ii is not valid, due to strong intraannual correlations by which different seasons are correlated. We also show that, even in the absence of correlations, for Gaussian white noise, the conventional analysis leads to a strong overestimation of the significance of the seasonal trends, because multiple testing has not been taken into account. In addition, when the data exhibit long-term memory (which is the case in most climate records), assumption iii leads to a further overestimation of the trend significance. Combining Monte Carlo simulations with the Holm-Bonferroni method, we demonstrate how to obtain reliable estimates of the significance of the seasonal climate trends in long-term correlated records. For an illustration, we apply our method to representative temperature records from West Antarctica, which is one of the fastest-warming places on Earth and belongs to the crucial tipping elements in the Earth system.

Randomised control trial showed that delayed cord clamping and milking resulted in no significant differences in iron stores and physical growth parameters at one year of age.

PubMed

Agarwal, Shivam; Jaiswal, Vijay; Singh, Dharamveer; Jaiswal, Prateek; Garg, Amit; Upadhyay, Amit

2016-11-01

Placental redistribution has been shown to improve haematological outcomes in the immediate neonatal period and early infancy. This study compared the effects of delayed cord clamping (DCC) and umbilical cord milking (UCM) on haematological and growth parameters at 12 months of age. This was a follow-up study of a randomised control trial, conducted in a tertiary care paediatric centre from August 2013 to August 2014. We studied 200 apparently healthy Indian infants randomised at birth to receive DCC for 60-90 seconds or UCM. The outcome measures were iron status and physical growth parameters at 12 months. Of the 200 babies, 161 completed the follow-up and baseline characteristics were comparable in both groups. The mean haemoglobin in the DCC group (102.2 (17.2) g/L and serum ferritin 16.44 (2.77) μg/L) showed no significant differences to the UCM group (98.6 (17.1) g/L and 18.2 (2.8) μg/L) at one year. In addition, there were no significant differences in weight, height and mid-upper arm circumference in the two groups. Term-born Indian infants who had DCC at 60-90 seconds or UCM showed no significant differences in ferritin and haemoglobin levels and growth parameters at 12 months of age. ©2016 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Does addition of 'mud-pack and hot pool treatment' to patient education make a difference in fibromyalgia patients? A randomized controlled single blind study.

PubMed

Bağdatlı, Ali Osman; Donmez, Arif; Eröksüz, Rıza; Bahadır, Güler; Turan, Mustafa; Erdoğan, Nergis

2015-12-01

The aim of this randomized controlled single-blind study is to explore whether addition of mud-pack and hot pool treatments to patient education make a significant difference in short and mild term outcomes of the patients with fibromyalgia. Seventy women with fibromyalgia syndrome were randomly assigned to either balneotherapy with mud-pack and hot pool treatments (35) or control (35) groups. After randomization, five patients from balneotherapy group and five patients from control group were dropped out from the study with different excuses. All patients had 6-h patient education programme about fibromyalgia syndrome and were given a home exercise programme. The patients in balneotherapy group had heated pool treatment at 38 °C for 20 min a day, and mud-pack treatment afterwards on back region at 45 °C. Balneotherapy was applied on weekdays for 2 weeks. All patients continued to take their medical treatment. An investigator who was blinded to the intervention assessed all the patients before and after the treatment, at the first and the third months of follow-up. Outcome measures were FIQ, BDI and both patient's and physician's global assessments. Balneotherapy group was significantly better than control group at after the treatment and at the end of the first month follow-up assessments in terms of patient's and physician's global assessment, total FIQ score, and pain intensity, fatigue, non-refreshed awaking, stiffness, anxiety and depression subscales of FIQ. No significant difference was found between the groups in terms of BDI scores. It is concluded that patient education combined with 2 weeks balneotherapy application has more beneficial effects in patients with fibromyalgia syndrome as compared to patient education alone.

Does addition of `mud-pack and hot pool treatment' to patient education make a difference in fibromyalgia patients? A randomized controlled single blind study

NASA Astrophysics Data System (ADS)

Bağdatlı, Ali Osman; Donmez, Arif; Eröksüz, Rıza; Bahadır, Güler; Turan, Mustafa; Erdoğan, Nergis

2015-12-01

The aim of this randomized controlled single-blind study is to explore whether addition of mud-pack and hot pool treatments to patient education make a significant difference in short and mild term outcomes of the patients with fibromyalgia. Seventy women with fibromyalgia syndrome were randomly assigned to either balneotherapy with mud-pack and hot pool treatments (35) or control (35) groups. After randomization, five patients from balneotherapy group and five patients from control group were dropped out from the study with different excuses. All patients had 6-h patient education programme about fibromyalgia syndrome and were given a home exercise programme. The patients in balneotherapy group had heated pool treatment at 38 °C for 20 min a day, and mud-pack treatment afterwards on back region at 45 °C. Balneotherapy was applied on weekdays for 2 weeks. All patients continued to take their medical treatment. An investigator who was blinded to the intervention assessed all the patients before and after the treatment, at the first and the third months of follow-up. Outcome measures were FIQ, BDI and both patient's and physician's global assessments. Balneotherapy group was significantly better than control group at after the treatment and at the end of the first month follow-up assessments in terms of patient's and physician's global assessment, total FIQ score, and pain intensity, fatigue, non-refreshed awaking, stiffness, anxiety and depression subscales of FIQ. No significant difference was found between the groups in terms of BDI scores. It is concluded that patient education combined with 2 weeks balneotherapy application has more beneficial effects in patients with fibromyalgia syndrome as compared to patient education alone.

Additive direct-write microfabrication for MEMS: A review

NASA Astrophysics Data System (ADS)

Teh, Kwok Siong

2017-12-01

Direct-write additive manufacturing refers to a rich and growing repertoire of well-established fabrication techniques that builds solid objects directly from computer- generated solid models without elaborate intermediate fabrication steps. At the macroscale, direct-write techniques such as stereolithography, selective laser sintering, fused deposition modeling ink-jet printing, and laminated object manufacturing have significantly reduced concept-to-product lead time, enabled complex geometries, and importantly, has led to the renaissance in fabrication known as the maker movement. The technological premises of all direct-write additive manufacturing are identical—converting computer generated three-dimensional models into layers of two-dimensional planes or slices, which are then reconstructed sequentially into threedimensional solid objects in a layer-by-layer format. The key differences between the various additive manufacturing techniques are the means of creating the finished layers and the ancillary processes that accompany them. While still at its infancy, direct-write additive manufacturing techniques at the microscale have the potential to significantly lower the barrier-of-entry—in terms of cost, time and training—for the prototyping and fabrication of MEMS parts that have larger dimensions, high aspect ratios, and complex shapes. In recent years, significant advancements in materials chemistry, laser technology, heat and fluid modeling, and control systems have enabled additive manufacturing to achieve higher resolutions at the micrometer and nanometer length scales to be a viable technology for MEMS fabrication. Compared to traditional MEMS processes that rely heavily on expensive equipment and time-consuming steps, direct-write additive manufacturing techniques allow for rapid design-to-prototype realization by limiting or circumventing the need for cleanrooms, photolithography and extensive training. With current direct-write additive

10 CFR 50.43 - Additional standards and provisions affecting class 103 licenses and certifications for...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Additional standards and provisions affecting class 103... Regulatory Approvals § 50.43 Additional standards and provisions affecting class 103 licenses and... propose nuclear reactor designs which differ significantly from light-water reactor designs that were...

10 CFR 50.43 - Additional standards and provisions affecting class 103 licenses and certifications for...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Additional standards and provisions affecting class 103... Regulatory Approvals § 50.43 Additional standards and provisions affecting class 103 licenses and... propose nuclear reactor designs which differ significantly from light-water reactor designs that were...

10 CFR 50.43 - Additional standards and provisions affecting class 103 licenses and certifications for...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Additional standards and provisions affecting class 103... Regulatory Approvals § 50.43 Additional standards and provisions affecting class 103 licenses and... propose nuclear reactor designs which differ significantly from light-water reactor designs that were...

10 CFR 50.43 - Additional standards and provisions affecting class 103 licenses and certifications for...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Additional standards and provisions affecting class 103... Regulatory Approvals § 50.43 Additional standards and provisions affecting class 103 licenses and... propose nuclear reactor designs which differ significantly from light-water reactor designs that were...

DNA entropy reveals a significant difference in complexity between housekeeping and tissue specific gene promoters.

PubMed

Thomas, David; Finan, Chris; Newport, Melanie J; Jones, Susan

2015-10-01

The complexity of DNA can be quantified using estimates of entropy. Variation in DNA complexity is expected between the promoters of genes with different transcriptional mechanisms; namely housekeeping (HK) and tissue specific (TS). The former are transcribed constitutively to maintain general cellular functions, and the latter are transcribed in restricted tissue and cells types for specific molecular events. It is known that promoter features in the human genome are related to tissue specificity, but this has been difficult to quantify on a genomic scale. If entropy effectively quantifies DNA complexity, calculating the entropies of HK and TS gene promoters as profiles may reveal significant differences. Entropy profiles were calculated for a total dataset of 12,003 human gene promoters and for 501 housekeeping (HK) and 587 tissue specific (TS) human gene promoters. The mean profiles show the TS promoters have a significantly lower entropy (p<2.2e-16) than HK gene promoters. The entropy distributions for the 3 datasets show that promoter entropies could be used to identify novel HK genes. Functional features comprise DNA sequence patterns that are non-random and hence they have lower entropies. The lower entropy of TS gene promoters can be explained by a higher density of positive and negative regulatory elements, required for genes with complex spatial and temporary expression. Copyright © 2015 Elsevier Ltd. All rights reserved.

Regional geoid computation by least squares modified Hotine's formula with additive corrections

NASA Astrophysics Data System (ADS)

Märdla, Silja; Ellmann, Artu; Ågren, Jonas; Sjöberg, Lars E.

2018-03-01

Geoid and quasigeoid modelling from gravity anomalies by the method of least squares modification of Stokes's formula with additive corrections is adapted for the usage with gravity disturbances and Hotine's formula. The biased, unbiased and optimum versions of least squares modification are considered. Equations are presented for the four additive corrections that account for the combined (direct plus indirect) effect of downward continuation (DWC), topographic, atmospheric and ellipsoidal corrections in geoid or quasigeoid modelling. The geoid or quasigeoid modelling scheme by the least squares modified Hotine formula is numerically verified, analysed and compared to the Stokes counterpart in a heterogeneous study area. The resulting geoid models and the additive corrections computed both for use with Stokes's or Hotine's formula differ most in high topography areas. Over the study area (reaching almost 2 km in altitude), the approximate geoid models (before the additive corrections) differ by 7 mm on average with a 3 mm standard deviation (SD) and a maximum of 1.3 cm. The additive corrections, out of which only the DWC correction has a numerically significant difference, improve the agreement between respective geoid or quasigeoid models to an average difference of 5 mm with a 1 mm SD and a maximum of 8 mm.

Effect of Mg Addition on the Refinement and Homogenized Distribution of Inclusions in Steel with Different Al Contents

NASA Astrophysics Data System (ADS)

Wang, Linzhu; Yang, Shufeng; Li, Jingshe; Zhang, Shuo; Ju, Jiantao

2017-04-01

To investigate the effect of Mg addition on the refinement and homogenized distribution of inclusions, deoxidized experiments with different amounts of aluminum and magnesium addition were carried out at 1873 K (1600 °C) under the condition of no fluid flow. The size distribution of three-dimensional inclusions obtained by applying the modified Schwartz-Saltykov transformation from the observed planar size distribution, and degree of homogeneity in inclusion dispersion quantified by measuring the inter-surface distance of inclusions, were studied as a function of the amount of Mg addition and holding time. The nucleation and growth of inclusions based on homogeneous nucleation theory and Ostwald ripening were discussed with the consideration of supersaturation degree and interfacial energy between molten steel and inclusions. The average attractive force acted on inclusions in experimental steels was estimated according to Paunov's theory. The results showed that in addition to increasing the Mg addition, increasing the oxygen activity at an early stage of deoxidation and lowering the dissolved oxygen content are conductive to the increase of nucleation rate as well as to the refinement of inclusions Moreover, it was found that the degree of homogeneity in inclusion dispersion decreases with an increase of the attractive force acted on inclusions, which is largely dependent on the inclusion composition and volume fraction of inclusions.

The Case for Use of Simple Difference Scores to Test the Significance of Differences in Mean Rates of Change in Controlled Repeated Measurements Designs

ERIC Educational Resources Information Center

Overall, John E.; Tonidandel, Scott

2010-01-01

A previous Monte Carlo study examined the relative powers of several simple and more complex procedures for testing the significance of difference in mean rates of change in a controlled, longitudinal, treatment evaluation study. Results revealed that the relative powers depended on the correlation structure of the simulated repeated measurements.…

Expression and significance of MMP3 in synovium of knee joint at different stage in osteoarthritis patients.

PubMed

Chen, Jun-Jie; Huang, Jie-Feng; Du, Wen-Xi; Tong, Pei-Jian

2014-04-01

To investigate the expression and significance of MMP-3 in synovium of knee joint at different stage in osteoarthritis (OA) patients. Knee synovial tissue were collected in 90 OA patients (the OA group). Patients in the OA group was divided into 3 subgroups: grade I subgroup (n=30), grade II subgroup (n=30), grade III; subgroup (n=30). Thirty patients served as control group. Immunohistochemical assay was used to detect the expression of MMP-3 protein in the knee synovial tissue. MMP-3 protein was detected in all knee synovial tissue. The expression of MMP-3 protein in the OA group was significantly higher that in the normal synovium (P<0.05), and the MMP-3 protein was mainly located in the cytoplasm. There was significant difference in the expression of MMP-3 protein between the grade I subgroup and the grade II, grade III subgroups (all P<0.05). The expression of MMP-3 protein was positively related to the severity of OA (r=0.912, P<0.05). The expression of MMP-3 protein are closely related to pathogenic mechanism of OA. It may be an important indicator of early diagnosis and the activity of the disease of osteoarthritis. Copyright © 2014 Hainan Medical College. Published by Elsevier B.V. All rights reserved.

Comparison of prosthetic models produced by traditional and additive manufacturing methods.

PubMed

Park, Jin-Young; Kim, Hae-Young; Kim, Ji-Hwan; Kim, Jae-Hong; Kim, Woong-Chul

2015-08-01

The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (α=.05). The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.

Functional significance of genetically different symbiotic algae Symbiodinium in a coral reef symbiosis.

PubMed

Loram, J E; Trapido-Rosenthal, H G; Douglas, A E

2007-11-01

The giant sea anemone Condylactis gigantea associates with members of two clades of the dinoflagellate alga Symbiodinium, either singly or in mixed infection, as revealed by clade-specific quantitative polymerase chain reaction of large subunit ribosomal DNA. To explore the functional significance of this molecular variation, the fate of photosynthetically fixed carbon was investigated by (14)C radiotracer experiments. Symbioses with algae of clades A and B released ca. 30-40% of fixed carbon to the animal tissues. Incorporation into the lipid fraction and the low molecular weight fraction dominated by amino acids was significantly higher in symbioses with algae of clade A than of clade B, suggesting that the genetically different algae in C. gigantea are not functionally equivalent. Symbioses with mixed infections yielded intermediate values, such that this functional trait of the symbiosis can be predicted from the traits of the contributing algae. Coral and sea anemone symbioses with Symbiodinium break down at elevated temperature, a process known as 'coral bleaching'. The functional response of the C. gigantea symbiosis to heat stress varied between the algae of clades A and B, with particularly depressed incorporation of photosynthetic carbon into lipid of the clade B algae, which are more susceptible to high temperature than the algae of clade A. This study provides a first exploration of how the core symbiotic function of photosynthate transfer to the host varies with the genotype of Symbiodinium, an algal symbiont which underpins corals and, hence, coral reef ecosystems.

Superfund explanation of significant difference for the Record of Decision (EPA Region 10): Umatilla Army Depot (Lagoons), Hermiston, OR, September 30, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-10-01

This document presents an Explanation of Significant Difference (ESD) from the Record of Decision (ROD) for the Umatilla Depot Activity (UMDA) Explosives Washout Lagoons Soils Operable Unit issued September 25, 1992 (PB93-964610). This ESD documents the significant differences to the selected remedy outlined in the ROD. In summary, the significant difference from the selected remedy in the ROD is the utilization of the treated soil as the organic component in the re-vegetation of several designated sites on the installation rather than backfilling the former Explosive Washout Lagoons with the compost.

A study of the differences in the request of glycated hemoglobin in primary care in Spain: A global, significant, and potentially dangerous under-request.

PubMed

Salinas, Maria; López-Garrigós, Maite; Uris, Joaquín; Leiva-Salinas, Carlos

2014-08-01

The study was performed to compare the variability and appropriateness in the request of glycated hemoglobin (HbA1c) in primary care in Spain. 76 Spanish laboratories from diverse regions across Spain filled out the number of HbA1c tests requested by general practitioners (GPs) during the year 2012. Every patient seen at the different primary care centers was included in the study. Each participating laboratory was required to provide organizational data. The number of HbA1c requests per 1000 inhabitants was calculated and compared between regions. To investigate whether HbA1c was appropriately requested to manage and to diagnose Diabetes Mellitus (DM), the number of necessary HbA1c was calculated, according to the disease prevalence in Spain (6.9%) and the guidelines regarding DM management and diagnosis. 17679195 patients were included in the study. A total of 1544551 HbA1c tests were ordered. No significant difference in the number of HbA1c requests per 1000 inhabitants was seen according to hospital setting (rural, urban or rural-urban). No significant differences were noticed between 3 Spanish regions, except the Valencian Community that presented higher values. Regarding the request appropriateness, 3280183 additional tests would have been necessary to manage diabetic patients and to diagnose new patients with the disease. There was a high variability regarding the request of HbA1c; the test was under-requested in all the participating health departments. This emphasizes the need to accomplish interventions to improve an appropriate use. Copyright © 2014. Published by Elsevier Inc.

A Q Study of Music Teachers' Attitudes towards the Significance of Individual Differences for Teaching and Learning in Music

ERIC Educational Resources Information Center

Hewitt, Allan

2006-01-01

Classroom teachers' beliefs and attitudes regarding the role and significance of individual differences have received relatively little attention in the literature to date, notwithstanding the well-documented importance both of teachers' beliefs and factors of individual difference for the learning and teaching process. The purpose of this study…

Carbon turnover in topsoil and subsoil: The microbial response to root litter additions and different environmental conditions in a reciprocal soil translocation experiment

NASA Astrophysics Data System (ADS)

Preusser, Sebastian; Poll, Christian; Marhan, Sven; Kandeler, Ellen

2017-04-01

with root addition had generally higher microbial abundances than those with no root addition. Here, especially fungi benefited from the additional carbon source with highly increased abundances in all incorporation depths. Also the altered environmental conditions in the different incorporation depths significantly influenced the different microbial groups. The steepest decrease with depth was detected in fungal abundance, while bacteria were less affected and increased in relative abundance in soil samples incorporated into subsoil layers. The highest seasonal variability in microbial abundance, however, was determined in 5 cm incorporation depth demonstrating the higher amplitude in micro-climatic and micro-environmental conditions in this near-surface soil habitat. In summary, this experiment demonstrated that carbon quality and quantity are the main factors restricting fungal abundance in deeper soil layers, while bacterial decomposer communities are adapted to a wider range of habitat conditions.

Breast conserving treatment for breast cancer: dosimetric comparison of different non-invasive techniques for additional boost delivery

PubMed Central

2014-01-01

Background Today it is unclear which technique for delivery of an additional boost after whole breast radiotherapy for breast conserved patients should be state of the art. We present a dosimetric comparison of different non-invasive treatment techniques for additional boost delivery. Methods For 10 different tumor bed localizations, 7 different non-invasive treatment plans were made. Dosimetric comparison of PTV-coverage and dose to organs at risk was performed. Results The Vero system achieved an excellent PTV-coverage and at the same time could minimize the dose to the organs at risk with an average near-maximum-dose (D2) to the heart of 0.9 Gy and the average volume of ipsilateral lung receiving 5 Gy (V5) of 1.5%. The TomoTherapy modalities delivered an average D2 to the heart of 0.9 Gy for the rotational and of 2.3 Gy for the static modality and an average V5 to the ipsilateral lung of 7.3% and 2.9% respectively. A rotational technique offers an adequate conformity at the cost of more low dose spread and a larger build-up area. In most cases a 2-field technique showed acceptable PTV-coverage, but a bad conformity. Electrons often delivered a worse PTV-coverage than photons, with the planning requirements achieved only in 2 patients and with an average D2 to the heart of 2.8 Gy and an average V5 to the ipsilateral lung of 5.8%. Conclusions We present advices which can be used as guidelines for the selection of the best individualized treatment. PMID:24467916

Stromal p16 expression is significantly increased in endometrial carcinoma

PubMed Central

Yoon, Nara; Kim, Ji-Ye; Kim, Hyun-Soo

2017-01-01

p16 is a negative regulator of cell proliferation and is considered a tumor suppressor protein. Alterations in p16 protein expression are associated with tumor development and progression. However, the p16 expression status in the peritumoral stroma has not been investigated in the endometrium. Therefore, we evaluated stromal p16 expression in different types of endometrial lesions using immunohistochemistry. Differences in the p16 expression status according to the degree of malignancy and histological type were analyzed. This study included 62, 26, and 36 cases of benign, precancerous, and malignant endometrial lesions, respectively. Most benign lesions showed negative or weak expression, whereas precancerous lesions showed a variable degree of staining proportion and intensity. Atypical hyperplasia/endometrial intraepithelial neoplasia (AH/EIN) and serous endometrial intraepithelial carcinoma (SEIC) had significantly higher stromal p16 expression levels than benign lesions. Endometrioid carcinoma (EC), serous carcinoma (SC), and carcinosarcoma showed significantly elevated stromal p16 expression levels compared with benign and precancerous lesions. In addition, there were significant differences in stromal p16 expression between AH/EIN and SEIC and between EC and SC. In contrast, differences in stromal p16 expression among nonpathological endometrium, atrophic endometrium, endometrial polyp, and hyperplasia without atypia were not statistically significant. Our observations suggest that stromal p16 expression is involved in the development and progression of endometrial carcinoma, and raise the possibility that p16 overexpression in the peritumoral stroma is associated with aggressive oncogenic behavior of endometrial SC. PMID:27902476

Replacing Phosphorus-Containing Food Additives With Foods Without Additives Reduces Phosphatemia in End-Stage Renal Disease Patients: A Randomized Clinical Trial.

PubMed

de Fornasari, Margareth Lage Leite; Dos Santos Sens, Yvoty Alves

2017-03-01

The purpose of the study was to verify the effects of replacing phosphorus-containing food additives with foods without additives on phosphatemia in end-stage renal disease (ESRD) patients. Randomized clinical trial. Adult patients on hemodialysis for ≥6 months at a single center. A total of 134 patients with phosphorus levels of >5.5 mg/dL were included and were randomized into an intervention group (n = 67) and a control group (n = 67). The IG received individual orientation to replace processed foods that have phosphorus additives with foods of similar nutritional value without these additives. The CG received only the nutritional orientation given before the study. Clinical laboratory data, nutritional status, energy and protein intake, and normalized protein nitrogen appearance (nPNA) were evaluated at the beginning of the study and after 90 days. There was no initial difference between the groups in terms of serum phosphorus levels, nutritional status, and energy intake. After 3 months, there was a decline in phosphorus levels in the IG (from 7.2 ± 1.4 to 5.0 ± 1.3 mg/dL, P < .001), but there was no significant difference in the CG (from 7.1 ± 1.2 to 6.7 ± 1.2 mg/dL, P = .65). In the IG, 69.7% of the patients reached the serum phosphorus target of ≤5.5 mg/dL; however, only 18.5% of the CG subjects reached this level (P < .001). At the end, there was no difference between the two groups in terms of nutritional status, energy intake, protein intake, and nPNA. The replacing phosphorus-containing food additives with foods without additives reduced serum phosphorus without interfering in the nutritional status of ESRD patients. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Effect of the prefermentative addition of five enological tannins on anthocyanins and color in red wines.

PubMed

Liu, Yan-Xia; Liang, Na-Na; Wang, Jun; Pan, Qiu-Hong; Duan, Chang-Qing

2013-01-01

The effects of prefermentation addition of 5 exogenous tannins with different-origin anthocyanins and color characteristics were investigated in "Cabernet Sauvignon wines" at the end of alcoholic fermentation and the end of malolactic fermentation, and after 6 mo and 9 mo of bottle aging, respectively. The results showed that the application of GSKT2 could significantly retard the degradation of most anthocyanins in the process of alcoholic fermentation and the decrease of some pyranoanthocyanins during the subsequent 3 stages, thus causing more yellowness of wine in comparison with the control. Three other condensed tannins, GSKT1, QUET, and GSET, had a positive impact only on several anthocyanin components. Four condensed tannins all contributed to more redness, suggesting that the action mechanism might be to protect wine against oxidation or contribute to form copigmented anthocyanidins, or polymeric pigments. The application of FOLT (hydrolysable tannin) did not produce any influence on wine redness even after 9 mo of bottle aging. This work provides some reasons for the reasonable application of tannin additives. The prefermentative application of condensed tannins overall could protect some pigment components from degradation and enhance wine redness. Tannin additives with different origins have different effectiveness. The tannin additive obtained from grape skins, like GSKT2, could produce significant promotion on both redness and yellowness in wine. The prefermentation addition of hydroxylase tannin like FOLT seems not to have a significant effect on wine color. © 2012 Institute of Food Technologists®

Growth and physiology of aspen supplied with different fertilizer addition rates

Treesearch

Mark D. Coleman; Richard E. Dickson; J.G. Isebrands

1998-01-01

Variable internal plant nutrient content may confound plant response to environmental stress. Plant nutrient content may be controlled with relative addition rate techniques in solution culture. However, because raising large numbers of plants in flowing solution culture is difficult. we investieated the feasibility of raisine plants in soil mix using relative...

Polyfunctional epoxies - Different molecular weights of brominated polymeric additives as flame retardants in graphite composites

NASA Technical Reports Server (NTRS)

Nir, Z.; Gilwee, W. J.; Kourtides, D. A.; Parker, J. A.

1983-01-01

The imparting of flame retardancy to graphite-reinforced composites without incurring mechanical property deterioration is investigated for the case of an experimental, trifunctional epoxy resin incorporating brominated polymeric additives (BPAs) of the diglycidyl type. Such mechanical properties as flexural strength and modulus, and short beam shear strength, were measured in dry and in hot/wet conditions, and the glass transition temperature, flammability, and water absorption were measured and compared with nonbromilated systems. Another comparison was made with a tetrafunctional epoxy system. The results obtained are explained in terms of differences in the polymeric backbone length of the bromine carrier polymer. BPAs are found to be a reliable bromine source for fire inhibition in carbon-reinforced composites without compromise of mechanical properties.

Neutron Characterization for Additive Manufacturing

NASA Technical Reports Server (NTRS)

Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

2013-01-01

Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

No Clinically Significant Difference Between Adult and Pediatric IKDC Subjective Knee Evaluation Scores in Adults.

PubMed

Stegmeier, Nicole; Oak, Sameer R; O'Rourke, Colin; Strnad, Greg; Spindler, Kurt P; Jones, Morgan; Farrow, Lutul D; Andrish, Jack; Saluan, Paul

Two versions of the International Knee Documentation Committee (IKDC) Subjective Knee Evaluation form currently exist: the original version (1999) and a recently modified pediatric-specific version (2011). Comparison of the pediatric IKDC with the adult version in the adult population may reveal that either version could be used longitudinally. We hypothesize that the scores for the adult IKDC and pediatric IKDC will not be clinically different among adult patients aged 18 to 50 years. Randomized crossover study design. Level 2. The study consisted of 100 participants, aged 18 to 50 years, who presented to orthopaedic outpatient clinics with knee problems. All participants completed both adult and pediatric versions of the IKDC in random order with a 10-minute break in between. We used a paired t test to test for a difference between the scores and a Welch's 2-sample t test to test for equivalence. A least-squares regression model was used to model adult scores as a function of pediatric scores, and vice versa. A paired t test revealed a statistically significant 1.6-point difference between the mean adult and pediatric scores. However, the 95% confidence interval (0.54-2.66) for this difference did not exceed our a priori threshold of 5 points, indicating that this difference was not clinically important. Equivalence testing with an equivalence region of 5 points further supported this finding. The adult and pediatric scores had a linear relationship and were highly correlated with an R 2 of 92.6%. There is no clinically relevant difference between the scores of the adult and pediatric IKDC forms in adults, aged 18 to 50 years, with knee conditions. Either form, adult or pediatric, of the IKDC can be used in this population for longitudinal studies. If the pediatric version is administered in adolescence, it can be used for follow-up into adulthood.

DASS-GUI: a user interface for identification and analysis of significant patterns in non-sequential data.

PubMed

Hollunder, Jens; Friedel, Maik; Kuiper, Martin; Wilhelm, Thomas

2010-04-01

Many large 'omics' datasets have been published and many more are expected in the near future. New analysis methods are needed for best exploitation. We have developed a graphical user interface (GUI) for easy data analysis. Our discovery of all significant substructures (DASS) approach elucidates the underlying modularity, a typical feature of complex biological data. It is related to biclustering and other data mining approaches. Importantly, DASS-GUI also allows handling of multi-sets and calculation of statistical significances. DASS-GUI contains tools for further analysis of the identified patterns: analysis of the pattern hierarchy, enrichment analysis, module validation, analysis of additional numerical data, easy handling of synonymous names, clustering, filtering and merging. Different export options allow easy usage of additional tools such as Cytoscape. Source code, pre-compiled binaries for different systems, a comprehensive tutorial, case studies and many additional datasets are freely available at http://www.ifr.ac.uk/dass/gui/. DASS-GUI is implemented in Qt.

Comparisons between Murine Polyomavirus and Simian Virus 40 Show Significant Differences in Small T Antigen Function ▿

PubMed Central

Andrabi, Shaida; Hwang, Justin H.; Choe, Jennifer Kean; Roberts, Thomas M.; Schaffhausen, Brian S.

2011-01-01

Although members of a virus family produce similar gene products, those products may have quite different functions. Simian virus 40 (SV40) large T antigen (LT), for example, targets p53 directly, but murine polyomavirus LT does not. SV40 small T antigen (SVST) has received considerable attention because of its ability to contribute to transformation of human cells. Here, we show that there are major differences between SVST and polyomavirus small T antigen (POLST) in their effects on differentiation, transformation, and cell survival. Both SVST and POLST induce cell cycle progression. However, POLST also inhibits differentiation of 3T3-L1 preadipocytes and C2C12 myoblasts. Additionally, POLST induces apoptosis of mouse embryo fibroblasts. SVST reduces the proapoptotic transcriptional activity of FOXO1 through phosphorylation. On the other hand, SVST complements large T antigen and Ras for the transformation of human mammary epithelial cells (HMECs), but POLST does not. Mechanistically, the differences between SVST and POLST may lie in utilization of protein phosphatase 2A (PP2A). POLST binds both Aα and Aβ scaffolding subunits of PP2A while SVST binds only Aα. Knockdown of Aβ could mimic POLST-induced apoptosis. The two small T antigens can target different proteins for dephosphorylation. POLST binds and dephosphorylates substrates, such as lipins, that SVST does not. PMID:21835797

Effects of biochar addition on toxic element concentrations in plants: A meta-analysis.

PubMed

Peng, Xin; Deng, Yinger; Peng, Yan; Yue, Kai

2018-03-01

Consuming food contaminated by toxic elements (TEs) could pose a substantial risk to human health. Recently, biochar has been extensively studied as an effective soil ameliorant in situ because of its ability to suppress the phytoavailability of TEs. However, despite the research interest, the effects of biochar applications to soil on different TE concentrations in different plant parts remain unclear. Here, we synthesize 1813 individual observations data collected from 97 articles to evaluate the effects of biochar addition on TE concentrations in plant parts. We found that (1) the experiment type, biochar feedstock and pyrolysis temperature all significantly decreased the TE concentration in plant parts; (2) the responses of Cd and Pb concentrations in edible and indirectly edible plant parts were significantly more sensitive to the effect of biochar than the Zn, Ni, Mn, Cr, Co and Cu concentrations; and (3) the biochar dosage and surface area, significantly influenced certain TE concentrations in plant tissues as determined via correlation analysis. Moreover, the only exception in this study was found for metalloid element (i.e., As) concentrations in plants, which were not significantly influenced by biochar addition. Overall, the effects of biochar on TE concentrations in plant tissues were negative, at least on average, and the central trends suggest that biochar has a considerable ability to mitigate the transfer of TEs to food, thereby reducing the associated health risks. Our results provide an initial quantitative determination of the effects of biochar addition on multifarious TEs in different plant parts as well as an assessment of the ability of biochar to reduce TE concentrations in plants. Copyright © 2017 Elsevier B.V. All rights reserved.

Increasing shrub abundance and N addition in Arctic tundra affect leaf and root litter decomposition differently

NASA Astrophysics Data System (ADS)

McLaren, J.; van de Weg, M. J.; Shaver, G. R.; Gough, L.

2013-12-01

Changes in global climate have resulted in a ';greening' of the Arctic as the abundance of deciduous shrub species increases. Consequently, not only the living plant community, but also the litter composition changes, which in turn can affect carbon turnover patterns in the Arctic. We examined effects of changing litter composition (both root and leaf litter) on decomposition rates with a litter bag study, and specifically focused on the impact of deciduous shrub Betula nana litter on litter decomposition from two evergreen shrubs (Ledum palustre, and Vaccinium vitis-idaea) and one graminoid (Eriophorum vaginatum) species. Additionally, we investigated how decomposition was affected by nutrient availability by placing the litterbags in an ambient and a fertilized moist acidic tundra environment. Measurements were carried out seasonally over 2 years (after snow melt, mid-growing season, end growing season). We measured litter mass loss over time, as well as the respiration rates (standardized for temperature and moisture) and temperature sensitivity of litter respiration at the time of harvesting the litter bags. For leaves, Betula litter decomposed faster than the other three species, with Eriophorum leaves decomposing the slowest. This pattern was observed for both mass loss and litter respiration rates, although the differences in respiration became smaller over time. Surprisingly, combining Betula with any other species resulted in slower overall weight loss rates than would be predicted based on monoculture weight loss rates. This contrasted with litter respiration at the time of sampling, which showed a positive mixing effect of adding Betula leaf liter to the other species. Apparently, during the first winter months (September - May) Betula litter decomposition is negatively affected by mixing the species and this legacy can still be observed in the total mass loss results later in the year. For root litter there were fewer effects of species identity on root

Effects of addition of different carbon materials on the electrochemical performance of nickel hydroxide electrode

NASA Astrophysics Data System (ADS)

Sierczynska, Agnieszka; Lota, Katarzyna; Lota, Grzegorz

Nickel hydroxide is used as an active material in positive electrodes of rechargeable alkaline batteries. The capacity of nickel-metal hydride (Ni-MH) batteries depends on the specific capacity of the positive electrode and utilization of the active material because of the Ni(OH) 2/NiOOH electrode capacity limitation. The practical capacity of the positive nickel electrode depends on the efficiency of the conductive network connecting the Ni(OH) 2 particle with the current collector. As β-Ni(OH) 2 is a kind of semiconductor, the additives are necessary to improve the conductivity between the active material and the current collector. In this study the effect of adding different carbon materials (flake graphite, multi-walled carbon nanotubes (MWNT)) on the electrochemical performance of pasted nickel-foam electrode was established. A method of production of MWNT special type of catalysts had an influence on the performance of the nickel electrodes. The electrochemical tests showed that the electrode with added MWNT (110-170 nm diameter) exhibited better electrochemical properties in the chargeability, specific discharge capacity, active material utilization, discharge voltage and cycling stability. The nickel electrodes with MWNT addition (110-170 nm diameter) have exhibited a specific capacity close to 280 mAh g -1 of Ni(OH) 2, and the degree of active material utilization was ∼96%.

Significant factors for work attractiveness and how these differ from the current work situation among operating department nurses.

PubMed

Björn, Catrine; Lindberg, Magnus; Rissén, Dag

2016-01-01

The aim was to examine significant factors for work attractiveness and how these differ from the current work situation among operating department nurses. A second objective was to examine the associations between age, gender, length of employment, work engagement, work ability, self-rated health indicators and attractiveness of the current work situation. The attractiveness of work is rarely taken into account in research on nurse retention. To expand this knowledge, it is relevant to examine factors that make work attractive and their associations with related concepts. Correlational, cross-sectional survey using a convenience sample. Questionnaires were answered by 147 nurses in four operating departments in Sweden. Correlation and regression analyses were conducted. The nurses rated the significance of all factors of work attractiveness higher than they rated those factors in their current work situation; salary, organisation and physical work environment had the largest differences. The most significant attractive factors were relationships, leadership and status. A statistically significant positive correlation between work engagement and attractive work was found. In the multiple regression model, the independent variables work engagement and older age significantly predicted work attractiveness. Several factors should be considered in the effort to increase work attractiveness in operating departments and thereby to encourage nurse retention. Positive aspects of work seem to unite work engagement and attractive work, while work ability and self-rated health indicators are other important dimensions in nurse retention. The great discrepancies between the significance of attractive factors and the current work situation in salary, organisation and physical work environment suggest ways in which work attractiveness may be increased. To discover exactly what needs to be improved may require a deeper look into the construct of the examined factors. © 2015 John

Application of standard addition for the determination of carboxypeptidase activity in Actinomucor elegans bran koji.

PubMed

Fu, J; Li, L; Yang, X Q; Zhu, M J

2011-01-01

Leucine carboxypeptidase (EC 3.4.16) activity in Actinomucor elegans bran koji was investigated via absorbance at 507 nm after stained by Cd-nihydrin solution, with calibration curve A, which was made by a set of known concentration standard leucine, calibration B, which was made by three sets of known concentration standard leucine solutions with the addition of three concentrations inactive crude enzyme extract, and calibration C, which was made by three sets of known concentration standard leucine solutions with the addition of three concentrations crude enzyme extract. The results indicated that application of pure amino acid standard curve was not a suitable way to determine carboxypeptidase in complicate mixture, and it probably led to overestimated carboxypeptidase activity. It was found that addition of crude exact into pure amino acid standard curve had a significant difference from pure amino acid standard curve method (p < 0.05). There was no significant enzyme activity difference (p > 0.05) between addition of active crude exact and addition of inactive crude kind, when the proper dilute multiple was used. It was concluded that the addition of crude enzyme extract to the calibration was needed to eliminate the interference of free amino acids and related compounds presented in crude enzyme extract.

Frequency and prognostic significance of additional cytogenetic abnormalities to the Philadelphia chromosome in young and older adults with acute lymphoblastic leukemia.

PubMed

Motlló, Cristina; Ribera, Josep-Maria; Morgades, Mireia; Granada, Isabel; Montesinos, Pau; Mercadal, Santiago; González-Campos, José; Moreno, María-José; Barba, Pere; Cervera, Marta; Barrios, Manuel; Novo, Andrés; Bernal, Teresa; Hernández-Rivas, Jesús-María; Abella, Eugenia; Amigo, María-Luz; Tormo, Mar; Martino, Rodrigo; Lavilla, Esperanza; Bergua, Juan; Serrano, Alfons; García-Belmonte, Daniel; Guàrdia, Ramon; Grau, Javier; Feliu, Evarist

2018-01-01

About 25-35% of adult patients with acute lymphoblastic leukemia show the Philadelphia (Ph) chromosome. Few series have evaluated the prognosis of additional cytogenetic alterations (ACA) to the Ph chromosome. We analyzed the frequency, type and prognostic significance ofACA in adults (18-60 years) treated in the ALL-Ph-08 trial. Fifty-two out of 74 patients (70%) showed ACA and 19 (26%) presented monosomies associated with t(9;22) (monosomal karyotype, MK). Similar complete response (CR) rate, CR duration, overall survival and event-free survival (EFS) were observed in patients with or without ACA, but patients with MK showed shorter CR duration and EFS than the remaining. On multivariate analysis, the only variable with prognostic impact for CR duration and EFS was the presence of MK (p = .003 and p = .036, respectively). Although ACA associated with the Ph chromosome are frequent, only monosomies were associated with poor prognosis in this group of patients.

Lidocaine Concentration in Oral Tissue by the Addition of Epinephrine.

PubMed

Tanaka, Eri; Yoshida, Kenji; Kawaai, Hiroyoshi; Yamazaki, Shinya

2016-01-01

The vasoconstrictive effect due to the addition of epinephrine to local anesthetic has been clearly shown by measuring blood-flow volume or blood anesthetic concentration in oral mucosal tissue. However, there are no reports on the measurement of anesthetic concentration using samples directly taken from the jawbone and oral mucosal tissue. Consequently, in this study, the effect of lidocaine concentration in the jawbone and oral mucosal tissue by the addition of epinephrine to the local anesthetic lidocaine was considered by quantitatively measuring lidocaine concentration within the tissue. Japanese white male rabbits (n = 96) were used as test animals. General anesthesia was induced by sevoflurane and oxygen, and then cannulation to the femoral artery was performed while arterial pressure was constantly recorded. Infiltration anesthesia was achieved by 0.5 mL of 2% lidocaine containing 1 : 80,000 epinephrine in the upper jawbone (E(+)) and 0.5 mL of 2% of epinephrine additive-free lidocaine (E(0)) under the periosteum. At specified time increments (10, 20, 30, 40, 50, and 60 minutes), samples from the jawbone, oral mucosa, and blood were collected, and lidocaine concentration was directly measured by high-performance liquid chromatography. No significant differences in the change in blood pressure were observed either in E(+) or E(0). In both E(+) and E(0) groups, the serum lidocaine concentration peaked 10 minutes after local anesthesia and decreased thereafter. At all time increments, serum lidocaine concentration in E(+) was significantly lower than that in E(0). There were no significant differences in measured lidocaine concentration between jawbone and mucosa within either the E(+) or the E(0) groups at all time points, although the E(0) group had significantly lower jawbone and mucosa concentrations than the E(+) group at all time points when comparing the 2 groups to each other. Addition of epinephrine to the local anesthetic inhibited systemic

Comparison of presbyopic additions determined by the fused cross-cylinder method using alternative target background colours.

PubMed

Wee, Sung-Hyun; Yu, Dong-Sik; Moon, Byeong-Yeon; Cho, Hyun Gug

2010-11-01

To compare and contrast standard and alternative versions of refractor head (phoropter)-based charts used to determine reading addition. Forty one presbyopic subjects aged between 42 and 60 years were tested. Tentative additions were determined using a red-green background letter chart, and 4 cross-grid charts (with white, red, green, or red-green backgrounds) which were used with the fused cross cylinder (FCC) method. The final addition for a 40 cm working distance was determined for each subject by subjectively adjusting the tentative additions. There were significant differences in the tentative additions obtained using the 5 methods (repeated measures ANOVA, p < 0.001). The mean differences between the tentative and final additions were <0.10 D and were not clinically meaningful, with the exception of the red-green letter test, and the red background in the FCC method. There were no significant differences between the tentative and final additions for the green background in the FCC method (p > 0.05). The intervals of the 95% limits of agreement were under ±0.50 D, and the narrowest interval (±0.26 D) was for the red-green background. The 3 FCC methods with a white, green, or red-green background provided a tentative addition close to the final addition. Compared with the other methods, the FCC method with the red-green background had a narrow range of error. Further, since this method combines the functions of both the fused cross-cylinder test and the duochrome test, it can be a useful technique for determining presbyopic additions. © 2010 The Authors. Ophthalmic and Physiological Optics © 2010 The College of Optometrists.

Protein phosphorylation differs significantly among ontogenetic phases in Malus seedlings

PubMed Central

2014-01-01

Background Although protein phosphorylation is an important post-translational modification affecting protein function and metabolism, dynamic changes in this process during ontogenesis remain unexplored in woody angiosperms. Methods Phosphorylated proteins from leaves of three apple seedlings at juvenile, adult vegetative and reproductive stages were extracted and subjected to alkaline phosphatase pre-treatment. After separating the proteins by two-dimensional gel electrophoresis and phosphoprotein-specific Pro-Q Diamond staining, differentially expressed phosphoproteins were identified by MALDI-TOF-TOF mass spectrometry. Results A total of 107 phosphorylated protein spots on nine gels (three ontogenetic phases × three seedlings) were identified by MALDI-TOF-TOF mass spectrometry. The 55 spots of ribulose-1, 5-bisphosphate carboxylase/oxygenase (Rubisco) large-chain fragments varied significantly in protein abundance and degree of phosphorylation among ontogenetic phases. Abundances of the 27 spots corresponding to Rubisco activase declined between juvenile and reproductive phases. More extensively, phosphorylated β-tubulin chain spots with lower isoelectric points were most abundant during juvenile and adult vegetative phases. Conclusions Protein phosphorylation varied significantly during vegetative phase change and floral transition in apple seedlings. Most of the observed changes were consistent among seedlings and between hybrid populations. PMID:24904238

Multiple Comparisons of Observation Means--Are the Means Significantly Different?

ERIC Educational Resources Information Center

Fahidy, T. Z.

2009-01-01

Several currently popular methods of ascertaining which treatment (population) means are different, via random samples obtained under each treatment, are briefly described and illustrated by evaluating catalyst performance in a chemical reactor.

7 CFR 1469.4 - Significant resource concerns.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Significant resource concerns. 1469.4 Section 1469.4... Provisions § 1469.4 Significant resource concerns. (a) Soil quality and water quality are nationally significant resource concerns for all land uses. (b) For each sign-up, the Chief may determine additional...

Addition Table of Colours: Additive and Subtractive Mixtures Described Using a Single Reasoning Model

ERIC Educational Resources Information Center

Mota, A. R.; Lopes dos Santos, J. M. B.

2014-01-01

Students' misconceptions concerning colour phenomena and the apparent complexity of the underlying concepts--due to the different domains of knowledge involved--make its teaching very difficult. We have developed and tested a teaching device, the addition table of colours (ATC), that encompasses additive and subtractive mixtures in a single…

Borreliacidal OspC Antibody Response of Canines with Lyme Disease Differs Significantly from That of Humans with Lyme Disease▿

PubMed Central

Lovrich, Steven D.; La Fleur, Rhonda L.; Jobe, Dean A.; Johnson, Jennifer C.; Asp, Krista E.; Schell, Ronald F.; Callister, Steven M.

2007-01-01

Humans reliably produce high concentrations of borreliacidal OspC antibodies specific for the seven C-terminal amino acids shortly after infection with Borrelia burgdorferi. We show that dogs also produce OspC borreliacidal antibodies but that their frequencies, intensities, and antigenicities differ significantly. The findings therefore confirm a major difference between the borreliacidal antibody responses of humans and canines with Lyme disease. PMID:17344346

Effectiveness of mifamurtide in addition to standard chemotherapy for high-grade osteosarcoma: a systematic review.

PubMed

Jimmy, Rincy; Stern, Cindy; Lisy, Karolina; White, Sarahlouise

2017-08-01

databases, and three government agency and organizational websites were searched). Studies published between 1990 to June 2016 were considered. A three-step strategy was developed using MeSH terminology and keywords to ensure that all relevant studies were included related to this review. The methodological quality of included studies was assessed by two reviewers, who appraised each study independently, using a standardized Joanna Briggs Institute (JBI) critical appraisal tool. Data was extracted from the studies that were identified as meeting the criteria for methodological quality using the standard JBI data extraction tool. Due to the heterogeneity of populations and interventions in available studies, meta-analysis was not possible and results are presented in narrative form. Three papers outlining two studies involving 802 patients evaluated the effectiveness of mifamurtide in addition of chemotherapy. Results indicated no significant difference in event-free survival between the addition of mifamurtide to standard chemotherapy regimen and chemotherapy alone, both in non-metastatic and metastatic osteosarcoma patients. There was a significant difference in progression-free survival favoring the addition of mifamurtide in pulmonary metastatic and/or relapsed osteosarcoma. There was no significant difference in overall survival between the addition of mifamurtide and chemotherapy alone in metastatic osteosarcoma; however there was a significant difference favoring the addition of mifamurtide in non-metastatic osteosarcoma patients. The addition of mifamurtide resulted in a significant difference in survival after relapse in pulmonary metastatic and/or relapsed osteosarcoma patients. Both studies reported on mifamurtide-related adverse events - the first was reported as toxicity which included haematological, hepatic, renal, gastrointestinal disorders, cardiac, rhythm and nervous system disorders, ear disorders and others (infection, fever; and performance status) in

[The expression and significance of VIP and its receptor in the cochlea of different degrees of chronic alcoholism rats].

PubMed

Feng, Jing; Liu, Haibing

2015-07-01

To determine whether chronic alcoholism alters the expression levels of Vasoactive intestinal polypeptide (VIP) and its receptor (VIPR1) in the cochlea of chronic alcoholism rats. We measured their expression levels in 30 SD rats, in which we created models of different degrees of chronic alcoholism. We investigated the presence of the mRNA of VIP in the cochlea of chronic alcoholism rats and controls by reverse transcription-polymerase chain reaction (RT-PCR) method. We investigated the presence of proteins of VIPR1 in poisoned rats and controls by western blot. We also evaluated the local distribution of VIP cells by immunohistochemistry. We found that the levels of VIP and VIPR1 were downregulated in the chronic alcoholism groups compared to the controls group. The differences in some expression levels were significant different between chronic alcoholism rats and control rats. Moreover, at different degrees of alcohol poisoning in rats, the contents of VIP and VIPR1 differed. Decreased levels of VIP and VIPR1 were detected in the deep chronic alcoholism group compared to the group with low-degree poisoning (P < 0.05). In spiral ganglion cell plasm the expression of VIP and VIPR1 had no significant difference in three groups (P > 0.05). These results suggest that VIP and VIPR1 play an important role in the auditory function in rats with chronic alcoholism. Chronic alcoholism may cause a peptide hormone secretion imbalance in the auditory system, eventually leading to hearing loss.

Subgroups of Paediatric Acute Lymphoblastic Leukaemia Might Differ Significantly in Genetic Predisposition to Asparaginase Hypersensitivity

PubMed Central

Kutszegi, Nóra; Semsei, Ágnes F.; Gézsi, András; Sági, Judit C.; Nagy, Viktória; Csordás, Katalin; Jakab, Zsuzsanna; Lautner-Csorba, Orsolya; Gábor, Krisztina Míta; Kovács, Gábor T.; Erdélyi, Dániel J.; Szalai, Csaba

2015-01-01

L-asparaginase (ASP) is a key element in the treatment of paediatric acute lymphoblastic leukaemia (ALL). However, hypersensitivity reactions (HSRs) to ASP are major challenges in paediatric patients. Our aim was to investigate genetic variants that may influence the risk to Escherichia coli-derived ASP hypersensitivity. Sample and clinical data collection was carried out from 576 paediatric ALL patients who were treated according to protocols from the Berlin—Frankfurt—Münster Study Group. A total of 20 single nucleotide polymorphisms (SNPs) in GRIA1 and GALNT10 genes were genotyped. Patients with GRIA1 rs4958351 AA/AG genotype showed significantly reduced risk to ASP hypersensitivity compared to patients with GG genotype in the T-cell ALL subgroup (OR = 0.05 (0.01–0.26); p = 4.70E-04), while no such association was found in pre-B-cell ALL. In the medium risk group two SNPs of GRIA1 (rs2055083 and rs707176) were associated significantly with the occurrence of ASP hypersensitivity (OR = 0.21 (0.09–0.53); p = 8.48E-04 and OR = 3.02 (1.36–6.73); p = 6.76E-03, respectively). Evaluating the genders separately, however, the association of rs707176 with ASP HSRs was confined only to females. Our results suggest that genetic variants of GRIA1 might influence the risk to ASP hypersensitivity, but subgroups of patients can differ significantly in this respect. PMID:26457809

Exercise intensity and gender difference of 3 different salsa dancing conditions.

PubMed

Emerenziani, G P; Guidetti, L; Gallotta, M C; Franciosi, E; Buzzachera, C F; Baldari, C

2013-04-01

The aims of this study were to estimate the difference in exercise intensity (METs), energy cost (EE) and gender difference between a typical salsa lesson (TSL), rueda de casino lesson (RCL), and salsa dancing at a night club (SDN). Subjects performed 1 pre-testing session and 3 testing conditions. During the pre-testing session height, weight and V˙O2max were assessed. During the testing conditions all subjects performed 3 different kinds of salsa dance. Heart rate was assessed during each dance condition. The exercise intensity of the 3 salsa dancing conditions was moderate ranging from 3.9 to 5.5 METs. A significant difference between genders for HRpeak (P=0.01), max%HRR (P=0.006) and mean EE (P=0.02) were observed. Significant gender×condition interactions for HRpeak (P=0.03), mean %HRR (P=0.02), mean METs (P=0.02) and mean EE (P=0.02) were found. In addition, a significant main effect for each condition was found in all variables (P<0.01). Our results showed that the exercise intensities of all 3 salsa dancing conditions were moderate. Findings showed some significant differences in exercise intensity between males and females and within conditions. Salsa dancing could be useful in achieving a significant training effect in people who have a low level of fitness. © Georg Thieme Verlag KG Stuttgart · New York.

No Clinically Significant Difference Between Adult and Pediatric IKDC Subjective Knee Evaluation Scores in Adults

PubMed Central

Stegmeier, Nicole; Oak, Sameer R.; O’Rourke, Colin; Strnad, Greg; Spindler, Kurt P.; Jones, Morgan; Farrow, Lutul D.; Andrish, Jack; Saluan, Paul

2017-01-01

Background: Two versions of the International Knee Documentation Committee (IKDC) Subjective Knee Evaluation form currently exist: the original version (1999) and a recently modified pediatric-specific version (2011). Comparison of the pediatric IKDC with the adult version in the adult population may reveal that either version could be used longitudinally. Hypothesis: We hypothesize that the scores for the adult IKDC and pediatric IKDC will not be clinically different among adult patients aged 18 to 50 years. Study Design: Randomized crossover study design. Level of Evidence: Level 2. Methods: The study consisted of 100 participants, aged 18 to 50 years, who presented to orthopaedic outpatient clinics with knee problems. All participants completed both adult and pediatric versions of the IKDC in random order with a 10-minute break in between. We used a paired t test to test for a difference between the scores and a Welch’s 2-sample t test to test for equivalence. A least-squares regression model was used to model adult scores as a function of pediatric scores, and vice versa. Results: A paired t test revealed a statistically significant 1.6-point difference between the mean adult and pediatric scores. However, the 95% confidence interval (0.54-2.66) for this difference did not exceed our a priori threshold of 5 points, indicating that this difference was not clinically important. Equivalence testing with an equivalence region of 5 points further supported this finding. The adult and pediatric scores had a linear relationship and were highly correlated with an R2 of 92.6%. Conclusion: There is no clinically relevant difference between the scores of the adult and pediatric IKDC forms in adults, aged 18 to 50 years, with knee conditions. Clinical Relevance: Either form, adult or pediatric, of the IKDC can be used in this population for longitudinal studies. If the pediatric version is administered in adolescence, it can be used for follow-up into adulthood. PMID

Additives enhancing enzymatic hydrolysis of lignocellulosic biomass.

PubMed

Rocha-Martín, Javier; Martinez-Bernal, Claudio; Pérez-Cobas, Yolanda; Reyes-Sosa, Francisco Manuel; García, Bruno Díez

2017-11-01

Linked to the development of cellulolytic enzyme cocktails from Myceliophthora thermophila, we studied the effect of different additives on the enzymatic hydrolysis yield. The hydrolysis of pretreated corn stover (PCS), sugar cane straw (PSCS) and microcrystalline cellulose (Avicel) was performed under industrial conditions using high solid loadings, limited mixing, and low enzyme dosages. The addition of polyethylene glycol (PEG4000) allowed to increase the glucose yields by 10%, 7.5%, and 32%, respectively in the three materials. PEG4000 did not have significant effect on the stability of the main individual enzymes but increased beta-glucosidase and endoglucanase activity by 20% and 60% respectively. Moreover, the presence of PEG4000 accelerated cellulase-catalyzed hydrolysis reducing up to 25% the liquefaction time. However, a preliminary economical assessment concludes that even with these improvements, a lower contribution of PEG4000 to the 2G bioethanol production costs would be needed to reach commercial feasibility. Copyright © 2017. Published by Elsevier Ltd.

Significant events in psychotherapy: An update of research findings.

PubMed

Timulak, Ladislav

2010-11-01

Significant events research represents a specific approach to studying client-identified important moments in the therapy process. The current study provides an overview of the significant events research conducted, the methodology used together with findings and implications. PsychInfo database was searched with keywords such as significant events, important events, significant moments, important moments, and counselling or psychotherapy. The references of the selected studies were also searched. This process led to the identification of 41 primary studies that used client-identified significant event(s) as a main or secondary focus of the study. These were consequently reviewed with regard to their methodology and findings. The findings are presented according to type of study conducted. The impacts of helpful events reported by clients are focused on contributions to therapeutic relationship and to in-session outcomes. Hindering events focus on some client disappointment with the therapist or therapy. The group therapy modality highlighted additional helpful impacts (like learning from others). Perspectives on what is significant in therapy differ between clients and therapists. The intensive qualitative studies reviewed confirm that the processes involved in significant events are complex and ambiguous. Studies show that the helpful events may also contain many hindering elements and that specific events are deeply contextually embedded in the preceding events of therapy. Some studies suggest that helpful significant events are therapeutically productive although this may need to be established further. Specific intensive studies show that the clients' perceptions in therapy may differ dramatically from that of the therapist. Furthermore, the relational and emotional aspects of significant moments may be more important for the clients than the cognitive aspects of therapy which are frequently stressed by therapists. 2010 The British Psychological Society.

Progressive addition lenses--measurements and ratings.

PubMed

Sheedy, Jim; Hardy, Raymond F; Hayes, John R

2006-01-01

This study is a followup to a previous study in which the optics of several progressive addition lens (PALs) designs were measured and analyzed. The objective was to provide information about various PAL designs to enable eye care practitioners to select designs based on the particular viewing requirements of the patient. The optical properties of 12 lenses of the same power for each of 23 different PAL designs were measured with a Rotlex Class Plus lens analyzer. Lenses were ordered through optical laboratories and specified to be plano with a +2.00 diopters add. Measurements were normalized to plano at the manufacturer-assigned location for the distance power to eliminate laboratory tolerance errors. The magnitude of unwanted astigmatism and the widths and areas of the distance, intermediate, and near viewing zones were calculated from the measured data according to the same criteria used in a previous study. The optical characteristics of the different PAL designs were significantly different from one another. The differences were significant in terms of the sizes and widths of the viewing zones, the amount of unwanted astigmatism, and the minimum fitting height. Ratings of the distance, intermediate, and near viewing areas were calculated for each PAL design based on the widths and sizes of those zones. Ratings for unwanted astigmatism and recommended minimum fitting heights were also determined. Ratings based on combinations of viewing zone ratings are also reported. The ratings are intended to be used to select a PAL design that matches the particular visual needs of the patient and to evaluate the success and performance of currently worn PALs. Reasoning and task analyses suggest that these differences can be used to select a PAL design to meet the individual visual needs of the patient; clinical trials studies are required to test this hypothesis.

Different additives to enhance the gelation of surimi gel with reduced sodium content.

PubMed

Cando, Deysi; Herranz, Beatriz; Borderías, A Javier; Moreno, Helena M

2016-04-01

This study tested the effect of adding tetra-sodium pyrophosphate, cystine and lysine as surimi gelation enhancers (Alaska Pollock) in order to reduce the sodium content of gels up to 0.3%. These gels were compared with others that contained 3% NaCl content (the amount typically used for surimi processing). To induce protein gelation, gels were first heated and then set at 5 °C/24 h. Once the physicochemical and rheological properties of the gels were determined, cystine and lysine were found to be the most effective additives improving the characteristics of low NaCl surimi gels. The action of these additives is mainly based on the induction of myofibrillar protein unfolding thus facilitating the formation of the types of bonds needed to establish an appropriate network. It was found that a setting period was needed for gel processing to maximize the effect of the additives. Copyright © 2015 Elsevier Ltd. All rights reserved.

Nanofibrillated cellulose as an additive in papermaking process: A review.

PubMed

Boufi, Sami; González, Israel; Delgado-Aguilar, Marc; Tarrès, Quim; Pèlach, M Àngels; Mutjé, Pere

2016-12-10

During the last two decades, cellulose nanofibres (CNF) have emerged as a promising, sustainable reinforcement with outstanding potential in material sciences. Though application of CNF in papermaking is recent, it is expected to find implementation in the near future to give a broader commercial market to this type of cellulose. The present review highlights recent progress in the field of the application of cellulose nanofibres as additives in papermaking. The effect of CNF addition on the wet end process is analysed according to the type of pulp used for papermaking. According to the literature consulted, improvement in paper's overall properties after CNF addition depended not only on the type and amount of CNF applied, but also in the pulp's origin and treatment. Bulk and surface application of CNF also presented significant differences regarding paper's final properties. This review also revises the mechanisms behind CNF reinforcing effect on paper and the effect of chemically modified CNF as additives. Copyright © 2016 Elsevier Ltd. All rights reserved.

Reducing nitrogen loss and phytotoxicity during beer vinasse composting with biochar addition.

PubMed

Wang, Xueqin; Zhao, Yue; Wang, Huan; Zhao, Xinyu; Cui, Hongyang; Wei, Zimin

2017-03-01

The aim of this study was to investigate the feasibility of composting of beer vinasse generated from brewing industry, the effect of biochar amendment on beer vinasse composting was also evaluated based on the changes of different physicochemical parameters, phytotoxicity and final compost quality. Four different treatments were performed of beer vinasse with biochar addition at 0, 5%, 10%, 15% (w/w dry basis). The final product obtained from beer vinasse composting was phytotoxicity-free (GI: 120.8%), mature (C/N: 19.88, NH 4 + -N: 295.0mg/kg, DOC: 9.76g/kg) and nutrient-rich (especially for P: 1.92%) compost except high N loss (60.76%), which had the potential to be as soil amendment or fertilizer. Biochar addition contributed to decomposition of DOC indicating higher microbial activity and attain phytotoxicity-free standard rapidly. N loss significantly reduced by 27% with biochar at 15% addition. And 15% biochar addition ensured all parameters, which was involved in composts quality, to attain the mature standard. Therefore, it was suggested that biochar addition at 15% was optimal. Copyright © 2016 Elsevier Ltd. All rights reserved.

Response of bacterial community structure and function to experimental rainwater additions in a coastal eutrophic embayment

NASA Astrophysics Data System (ADS)

Teira, Eva; Hernando-Morales, Víctor; Martínez-García, Sandra; Figueiras, Francisco G.; Arbones, Belén; Álvarez-Salgado, Xosé Antón

2013-03-01

Although recognized as a potentially important source of both inorganic and organic nutrients, the impact of rainwater on microbial populations from marine planktonic systems has been poorly assessed. The effect of rainwater additions on bacterioplankton metabolism and community composition was evaluated in microcosm experiments enclosing natural marine plankton populations from the Ría de Vigo (NW Spain). The experiments were conducted during three different seasons (spring, autumn and winter) using rainwater collected at three different locations: marine, urban and rural sites. Bacterial abundance and production significantly increased up to 1.3 and 1.8-fold, respectively, after urban rainwater additions in spring, when ambient nutrient concentration was very low. Overall, the increments in bacterial production were higher than those in bacterial respiration, which implies that a higher proportion of carbon consumed by bacteria would be available to higher trophic levels. The response of the different bacterial groups to distinct rainwater types differed between seasons. The most responsive bacterial groups were Betaproteobacteria which significantly increased their abundance after urban (in spring and winter) and marine (in spring) rainwater additions, and Bacteroidetes which positively responded to all rainwater treatments in spring and to urban rainwater in autumn. Gammaproteobacteria and Roseobacter responded only to urban (in spring) and marine (in winter) rainwater treatment, respectively. The responses to rainwater additions were moderate and transient, and the resulting bacterial community structure was not importantly altered.

[Expression and significance of p75NTR in dorsal root ganglia in different injury models].

PubMed

Li, Fang; Cai, Yan; Zhang, Jian-Yi

2008-12-01

To determine the expression and significance of p75NTR in the neuron and glia of dorsal root ganglia (DRG) in different injury models. The models of sciatic nerve injury, spinal cord injury, and combined injury (sciatic nerve injury one week prior to spinal cord injury) were established. The rats were randomly divided into a normal group,a sciatic nerve injury group,a spinal cord injury group, and a combined injury group. The sensory neurons in the DRG were labeled by fast blue (FB) injected in the dorsal column of spinal cord 0.5mm rostral to the transection site. The expression of p75NTR in the neurons and glia of the DRG was examined with immunofluorescence histochemistry after different kinds of injury and its expression in the FB positive neurons was further observed with immunofluorescence histochemistry combined with FB retrograde labeling. The expression of p75NTR was increased in the glia, but was downregulated in sensory neurons in the sciatic nerve injury group compared with the normal group. p75NTR immunoreactive products were downregulated in the glia in the spinal cord injury group compared with the sciatic nerve injury group or the combined injury group. In the combined lesion animals, the expression of p75NTR was similar to that of the sciatic nerve injury group. Its expression in the sensory neurons of DRG was downregulated,but was upregulated in the glia. The majority of sensory neurons labeled by FB in the combined injury group were p75NTR-negative, but surrounded by p75NTR-positive glia. p75NTR immunoreactive products in the glia and neurons of DRG have significant discrepancy after injury. The glial p75NTR in the DRG may play a role in the enhanced regeneration of acsending tract in the injured spinal cord after combined injury.

Food additives.

PubMed

Berglund, F

1978-01-01

The use of additives to food fulfils many purposes, as shown by the index issued by the Codex Committee on Food Additives: Acids, bases and salts; Preservatives, Antioxidants and antioxidant synergists; Anticaking agents; Colours; Emulfifiers; Thickening agents; Flour-treatment agents; Extraction solvents; Carrier solvents; Flavours (synthetic); Flavour enhancers; Non-nutritive sweeteners; Processing aids; Enzyme preparations. Many additives occur naturally in foods, but this does not exclude toxicity at higher levels. Some food additives are nutrients, or even essential nutritents, e.g. NaCl. Examples are known of food additives causing toxicity in man even when used according to regulations, e.g. cobalt in beer. In other instances, poisoning has been due to carry-over, e.g. by nitrate in cheese whey - when used for artificial feed for infants. Poisonings also occur as the result of the permitted substance being added at too high levels, by accident or carelessness, e.g. nitrite in fish. Finally, there are examples of hypersensitivity to food additives, e.g. to tartrazine and other food colours. The toxicological evaluation, based on animal feeding studies, may be complicated by impurities, e.g. orthotoluene-sulfonamide in saccharin; by transformation or disappearance of the additive in food processing in storage, e.g. bisulfite in raisins; by reaction products with food constituents, e.g. formation of ethylurethane from diethyl pyrocarbonate; by metabolic transformation products, e.g. formation in the gut of cyclohexylamine from cyclamate. Metabolic end products may differ in experimental animals and in man: guanylic acid and inosinic acid are metabolized to allantoin in the rat but to uric acid in man. The magnitude of the safety margin in man of the Acceptable Daily Intake (ADI) is not identical to the "safety factor" used when calculating the ADI. The symptoms of Chinese Restaurant Syndrome, although not hazardous, furthermore illustrate that the whole ADI

Ethnic Differences in Separate and Additive Effects of Anxiety and Depression on Self-rated Mental Health Among Blacks.

PubMed

Assari, Shervin; Dejman, Masoumeh; Neighbors, Harold W

2016-09-01

The aim of this study was to explore ethnic differences in the separate and additive effects of anxiety and depression on self-rated mental health (SRMH) of Blacks in the USA. With a cross-sectional design, we used data from a national household probability sample of African Americans (n = 3570) and Caribbean Blacks (n = 1621) who participated in the National Survey of American Life, 2001-2003. Demographic factors, socio-economic factors, 12-month general anxiety disorder (GAD) and major depressive disorder (MDD), and current SRMH were measured. In each ethnic group, three logistic regressions were used to assess the effects of GAD, MDD, and their combinations on SRMH. Among African Americans, GAD and MDD had separate effects on SRMH. Among Caribbean Blacks, only MDD but not GAD had separate effect on SRMH. Among African Americans, when the combined effects of GAD and MDD were tested, GAD but not MDD was associated with SRMH. The separate and additive effects of GAD and MDD on SRMH among Blacks depend on ethnicity. Although single-item SRMH measures are easy methods for the screening of mental health need, community-based programs that aim to meet the need for mental health services among Blacks in the USA should consider within-race ethnic differences in the applicability of such instruments.

Dissociation between exact and approximate addition in developmental dyslexia.

PubMed

Yang, Xiujie; Meng, Xiangzhi

2016-09-01

Previous research has suggested that number sense and language are involved in number representation and calculation, in which number sense supports approximate arithmetic, and language permits exact enumeration and calculation. Meanwhile, individuals with dyslexia have a core deficit in phonological processing. Based on these findings, we thus hypothesized that children with dyslexia may exhibit exact calculation impairment while doing mental arithmetic. The reaction time and accuracy while doing exact and approximate addition with symbolic Arabic digits and non-symbolic visual arrays of dots were compared between typically developing children and children with dyslexia. Reaction time analyses did not reveal any differences across two groups of children, the accuracies, interestingly, revealed a distinction of approximation and exact addition across two groups of children. Specifically, two groups of children had no differences in approximation. Children with dyslexia, however, had significantly lower accuracy in exact addition in both symbolic and non-symbolic tasks than that of typically developing children. Moreover, linguistic performances were selectively associated with exact calculation across individuals. These results suggested that children with dyslexia have a mental arithmetic deficit specifically in the realm of exact calculation, while their approximation ability is relatively intact. Copyright © 2016 Elsevier Ltd. All rights reserved.

The connectomes of males and females with autism spectrum disorder have significantly different white matter connectivity densities

PubMed Central

Irimia, Andrei; Torgerson, Carinna M.; Jacokes, Zachary J.; Van Horn, John D.

2017-01-01

Autism spectrum disorder (ASD) encompasses a set of neurodevelopmental conditions whose striking sex-related disparity (with an estimated male-to-female ratio of 4:1) remains unknown. Here we use magnetic resonance imaging (MRI) and diffusion weighted imaging (DWI) to identify the brain structure correlates of the sex-by-ASD diagnosis interaction in a carefully selected cohort of 110 ASD patients (55 females) and 83 typically-developing (TD) subjects (40 females). The interaction was found to be predicated primarily upon white matter connectivity density innervating, bilaterally, the lateral aspect of the temporal lobe, the temporo-parieto-occipital junction and the medial parietal lobe. By contrast, regional gray matter (GM) thickness and volume are not found to modulate this interaction significantly. When interpreted in the context of previous studies, our findings add considerable weight to three long-standing hypotheses according to which the sex disparity of ASD incidence is (A) due to WM connectivity rather than to GM differences, (B) modulated to a large extent by temporoparietal connectivity, and (C) accompanied by brain function differences driven by these effects. Our results contribute substantially to the task of unraveling the biological mechanisms giving rise to the sex disparity in ASD incidence, whose clinical implications are significant. PMID:28397802

Efficient Improvement of Silage Additives by Using Genetic Algorithms

PubMed Central

Davies, Zoe S.; Gilbert, Richard J.; Merry, Roger J.; Kell, Douglas B.; Theodorou, Michael K.; Griffith, Gareth W.

2000-01-01

The enormous variety of substances which may be added to forage in order to manipulate and improve the ensilage process presents an empirical, combinatorial optimization problem of great complexity. To investigate the utility of genetic algorithms for designing effective silage additive combinations, a series of small-scale proof of principle silage experiments were performed with fresh ryegrass. Having established that significant biochemical changes occur over an ensilage period as short as 2 days, we performed a series of experiments in which we used 50 silage additive combinations (prepared by using eight bacterial and other additives, each of which was added at six different levels, including zero [i.e., no additive]). The decrease in pH, the increase in lactate concentration, and the free amino acid concentration were measured after 2 days and used to calculate a “fitness” value that indicated the quality of the silage (compared to a control silage made without additives). This analysis also included a “cost” element to account for different total additive levels. In the initial experiment additive levels were selected randomly, but subsequently a genetic algorithm program was used to suggest new additive combinations based on the fitness values determined in the preceding experiments. The result was very efficient selection for silages in which large decreases in pH and high levels of lactate occurred along with low levels of free amino acids. During the series of five experiments, each of which comprised 50 treatments, there was a steady increase in the amount of lactate that accumulated; the best treatment combination was that used in the last experiment, which produced 4.6 times more lactate than the untreated silage. The additive combinations that were found to yield the highest fitness values in the final (fifth) experiment were assessed to determine a range of biochemical and microbiological quality parameters during full-term silage

The significance of virulence factors in Helicobacter pylori

PubMed Central

SHIOTA, Seiji; SUZUKI, Rumiko; YAMAOKA, Yoshio

2013-01-01

Helicobacter pylori (H. pylori) infection is linked to various gastroduodenal diseases; however, only a small fraction of these patients develop associated diseases. Despite the high prevalence of H. pylori infection in Africa and South Asia, the incidence of gastric cancer in these areas is much lower than those in other countries. The incidence of gastric cancer tends to decrease from north to south in East Asia. Such geographic differences in the pathology can be explained, at least in part, by the presence of different types of H. pylori virulence factors in addition to the host and environmental factors. Virulence factors of H. pylori, such as cagA, vacA, dupA, iceA, oipA and babA, have been demonstrated to be predictors of severe clinical outcomes. Interestingly, meta-analysis showed that CagA seropositivity was associated with gastric cancer compared with gastritis even in East Asian countries where almost of the strains possessing cagA. Meta-analysis also confirmed the significance of vacA, dupA and iceA. However, there remains the possibility that additional important pathogenic genes can be existed because H. pylori consists of approximately 1 600 genes. Despite advances in our understanding of the development of H. pylori-related diseases, further work is required to clarify the roles of H. pylori virulence factors. PMID:23452293

Significant Change in Marine Plankton Structure and Carbon Production After the Addition of River Water in a Mesocosm Experiment.

PubMed

Fouilland, E; Trottet, A; Alves-de-Souza, C; Bonnet, D; Bouvier, T; Bouvy, M; Boyer, S; Guillou, L; Hatey, E; Jing, H; Leboulanger, C; Le Floc'h, E; Liu, H; Mas, S; Mostajir, B; Nouguier, J; Pecqueur, D; Rochelle-Newall, E; Roques, C; Salles, C; Tournoud, M-G; Vasseur, C; Vidussi, F

2017-08-01

Rivers are known to be major contributors to eutrophication in marine coastal waters, but little is known on the short-term impact of freshwater surges on the structure and functioning of the marine plankton community. The effect of adding river water, reducing the salinity by 15 and 30%, on an autumn plankton community in a Mediterranean coastal lagoon (Thau Lagoon, France) was determined during a 6-day mesocosm experiment. Adding river water brought not only nutrients but also chlorophyceans that did not survive in the brackish mesocosm waters. The addition of water led to initial increases (days 1-2) in bacterial production as well as increases in the abundances of bacterioplankton and picoeukaryotes. After day 3, the increases were more significant for diatoms and dinoflagellates that were already present in the Thau Lagoon water (mainly Pseudo-nitzschia spp. group delicatissima and Prorocentrum triestinum) and other larger organisms (tintinnids, rotifers). At the same time, the abundances of bacterioplankton, cyanobacteria, and picoeukaryote fell, some nutrients (NH 4 + , SiO 4 3- ) returned to pre-input levels, and the plankton structure moved from a trophic food web based on secondary production to the accumulation of primary producers in the mesocosms with added river water. Our results also show that, after freshwater inputs, there is rapid emergence of plankton species that are potentially harmful to living organisms. This suggests that flash flood events may lead to sanitary issues, other than pathogens, in exploited marine areas.

The Urinary Microbiome Differs Significantly Between Patients With Chronic Prostatitis/Chronic Pelvic Pain Syndrome and Controls as Well as Between Patients With Different Clinical Phenotypes.

PubMed

Shoskes, Daniel A; Altemus, Jessica; Polackwich, Alan S; Tucky, Barbara; Wang, Hannah; Eng, Charis

2016-06-01

To study the urinary microbiome of patients with Chronic Prostatitis/Chronic Pelvic Pain Syndrome (CP/CPPS) compared with controls. We identified 25 patients with CP/CPPS and 25 men who were either asymptomatic or only had urinary symptoms. Midstream urine was collected. Symptom severity was measured with the National Institutes of Health Chronic Prostatitis Symptom Index and clinical phenotype with UPOINT. Total DNA was extracted from the urine pellet and bacterial-specific 16Sr-DNA-capture identified by MiSeq sequencing. Taxonomic and functional bioinformatic analyses used principal coordinate analysis (PCoA)/MacQIIME, LEfSe, and PiCRUSt algorithms. Patients and controls were similar ages (52.3 vs 57.0 years, P = .27). For patients, median duration was 48 months, mean Chronic Prostatitis Symptom Index was 26.0, and mean UPOINT domains was 3.6. Weighted 3D UniFrac PCoA revealed tighter clustering of controls distinct from the wider clustering of cases (P = .001; α-diversity P = .005). Seventeen clades were overrepresented in patients, for example, Clostridia, and 5 were underrepresented, eg, Bacilli, resulting in predicted perturbations in functional pathways. PiCRUSt inferred differentially regulated pathways between cases and controls that may be of relevance including sporulation, chemotaxis, and pyruvate metabolism. PCoA-derived microbiomic differences were noted for neurologic/systemic domains (P = .06), whereas LEfSe identified differences associated with each of the 6 clinical features. Urinary microbiomes from patients with CP/CPPS have significantly higher alpha(phylogenetic) diversity which cluster differently from controls, and higher counts of Clostridia compared with controls, resulting in predicted perturbations of functional pathways which could suggest metabolite-specific targeted treatment. Several measures of severity and clinical phenotype have significant microbiome differences. Copyright © 2016 Elsevier Inc. All rights

Effect of vital bleaching with solutions containing different concentrations of hydrogen peroxide and pineapple extract as an additive on human enamel using reflectance spectrophotometer: An in vitro study.

PubMed

Vejai Vekaash, Chitra Janardhanan; Kumar Reddy, Tripuravaram Vinay; Venkatesh, Kondas Vijay

2017-01-01

This study aims to evaluate the color change in human enamel bleached with three different concentrations of hydrogen peroxide, containing pineapple extract as an additive in two different timings, using reflectance spectrophotometer. The study aimed to investigate the bleaching efficacy on natural teeth using natural enzymes. Baseline color values of 10 randomly selected artificially stained incisors were obtained. The specimens were divided into three groups of 20 teeth each: Group 1 - 30% hydrogen peroxide, Group II - 20% hydrogen peroxide, and Group III - 10% hydrogen peroxide. One half of the tooth was bleached with hydrogen peroxide, and other was bleached with hydrogen peroxide and pineapple extract for 20 min (Subgroup A) and 10 min (Subgroup B). The results were statistically analyzed using student's t -test. The mean ΔE values of Group IA (31.62 ± 0.9), Group IIA (29.85 ± 1.2), and Group IIIA (28.65 ± 1.2) showed statistically significant higher values when compared to the mean Δ E values of Group 1A (25.02 ± 1.2), Group IIA (22.86 ± 1.1), and Group IIIA (16.56 ± 1.1). Identical results were obtained in Subgroup B. The addition of pineapple extract to hydrogen peroxide resulted in effective bleaching.

Spore test parameters matter: Mesophilic and thermophilic spore counts detected in raw milk and dairy powders differ significantly by test method.

PubMed

Kent, D J; Chauhan, K; Boor, K J; Wiedmann, M; Martin, N H

2016-07-01

United States dairy industry exports have steadily risen in importance over the last 10yr, with dairy powders playing a particularly critical role. Currently, approximately half of US-produced nonfat dry milk and skim milk powder is exported. Reaching new and expanding existing export markets relies in part on the control of endospore-forming bacteria in dairy powders. This study reports baseline mesophilic and thermophilic spore counts and spore populations from 55 raw material samples (primarily raw milk) and 33 dairy powder samples from dairy powder processors across the United States. Samples were evaluated using various spore testing methodologies and included initial heat treatments of (1) 80°C for 12 min; (2) 100°C for 30 min; and (3) 106°C for 30 min. Results indicate that significant differences in both the level and population of spores were found for both raw milk and dairy powders with the various testing methods. Additionally, on average, spore counts were not found to increase significantly from the beginning to the end of dairy powder processing, most likely related to the absence of biofilm formation by processing plant-associated sporeformers (e.g., Anoxybacillus sp.) in the facilities sampled. Finally, in agreement with other studies, Bacillus licheniformis was found to be the most prevalent sporeformer in both raw materials and dairy powders, highlighting the importance of this organism in developing strategies for control and reduction of spore counts in dairy powders. Overall, this study emphasizes the need for standardization of spore enumeration methodologies in the dairy powder industry. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Mapping quantitative trait loci with additive effects and additive x additive epistatic interactions for biomass yield, grain yield, and straw yield using a doubled haploid population of wheat (Triticum aestivum L.).

PubMed

Li, Z K; Jiang, X L; Peng, T; Shi, C L; Han, S X; Tian, B; Zhu, Z L; Tian, J C

2014-02-28

Biomass yield is one of the most important traits for wheat (Triticum aestivum L.)-breeding programs. Increasing the yield of the aerial parts of wheat varieties will be an integral component of future wheat improvement; however, little is known regarding the genetic control of aerial part yield. A doubled haploid population, comprising 168 lines derived from a cross between two winter wheat cultivars, 'Huapei 3' (HP3) and 'Yumai 57' (YM57), was investigated. Quantitative trait loci (QTL) for total biomass yield, grain yield, and straw yield were determined for additive effects and additive x additive epistatic interactions using the QTLNetwork 2.0 software based on the mixed-linear model. Thirteen QTL were determined to have significant additive effects for the three yield traits, of which six also exhibited epistatic effects. Eleven significant additive x additive interactions were detected, of which seven occurred between QTL showing epistatic effects only, two occurred between QTL showing epistatic effects and additive effects, and two occurred between QTL with additive effects. These QTL explained 1.20 to 10.87% of the total phenotypic variation. The QTL with an allele originating from YM57 on chromosome 4B and another QTL contributed by HP3 alleles on chromosome 4D were simultaneously detected on the same or adjacent chromosome intervals for the three traits in two environments. Most of the repeatedly detected QTL across environments were not significant (P > 0.05). These results have implications for selection strategies in wheat biomass yield and for increasing the yield of the aerial part of wheat.

Significance of the Hygiene Charter towards different sectors in Hong Kong.

PubMed

Lee, A; Cheng, F F K; Yuen, H S K; Ho, M; Ngan, W P; Suen, Y P; Au, S M Y; Li, S N; Tso, C Y; Ng, P P Y; Wong, Y P; Keung, M W; Lo, A S C; Wong, W S; Siu, D C H; Yuen, W K; Mok, K K; Fung, W Y; Wong, K K

2004-01-01

The occurrence of SARS in March 2003 has resulted in an increased interest, worldwide in emerging infectious diseases. The SARS experience provided us a lesson on the importance of promoting hygienic practices among individuals and different working sectors. In Hong Kong, a voluntary organization called the UNITE proposed a Hygiene Charter which aimed at taking hygiene to new levels. This action has been supported by individuals and different sectors including the Personal and Family, Management, Buildings, Catering, Education, Finance and Commercial, Industrial, Medical and Health, Public Transportation, Social Welfare, Sports and Culture and Tourism. As promotion and maintenance of environmental health requires input from different sectors, the signing of the Hygiene Charter provides an opportunity for individuals and the public to show their pledge and commitment to good hygiene practices. As a result, with environment improvement and good infectious disease control measures, prevention of epidemics of infectious diseases is deemed to be possible.

Pregnant Women's Preferences for Men's Faces Differ Significantly from Nonpregnant Women.

PubMed

Limoncin, Erika; Ciocca, Giacomo; Gravina, Giovanni Luca; Carosa, Eleonora; Mollaioli, Daniele; Cellerino, Alessandro; Mennucci, Andrea; Di Sante, Stefania; Lenzi, Andrea; Jannini, Emmanuele A

2015-05-01

There is evidence that women's preferences for facial characteristics in men's faces change according to menstrual phase and sexual hormones. Literature indicates that the pregnancy is characterized by a specific sexual hormonal pattern with respect to all other physiological conditions concerning the sexual hormone status during the reproductive age, configuring this physiological condition as an excellent surrogate to study how the sexual hormones may affect many of the aspects concerning the sexual behavior. The aim of this study was to investigate pregnancy as a model of hormonal influence on women's facial preferences in short-term and long-term relationships and compare the choices of pregnant women with those of nonpregnant women. Measurement of women's preferences for synthetic men's faces, morphed from hyper-masculine to hypomasculine shape. Forty-six women in the third trimester of pregnancy, and 70 nonpregnant women took part in the study. All women were shown a composite male face. The sexual dimorphism of the images was enhanced or reduced in a continuous fashion using an open-source morphing program that produced a sequence of 21 pictures of the same face warped from a feminized to a masculinized shape. Pregnant women's choices differed significantly from those of nonpregnant women. In fact, in the context of both a hypothetical short- (M = -0.4 ± 0.11) and long-term relationship (M = -0.4 ± 0.07) pregnant women showed a clear preference for a less masculine man's face than the other group (short-term: M = 0.15 ± 0.13; long-term: M = -0.06 ± 0.15; P < 0.0001). Women in the third trimester of pregnancy clearly prefer more feminine men's faces, distancing themselves from the choices of women in other physiological conditions concerning the sexual hormonal status during the reproductive age. However, other psychosocial variables may explain this interesting finding. © 2015 International Society for Sexual Medicine.

Changes of Properties of Bitumen Binders by Additives Application

NASA Astrophysics Data System (ADS)

Remišová, Eva; Holý, Michal

2017-10-01

Requirements for properties of bituminous binders are determined in the European standards. The physico-chemical behaviour of bitumen depends on its colloidal structure (asphaltenes dispersed into an oily matrix constituted by saturates, aromatics and resins) that depends primarily on its crude source and processing. Bitumen properties are evaluated by group composition, elementary analysis, but more often conventional or functional tests. Bitumen for road uses is assessed according to the physical characteristics. For the purpose of improving the qualitative properties of bitumen and asphalts the additives are applied e.g. to increase elasticity, improving the heat stability, improving adhesion to aggregate, to decrease viscosity, increasing the resistance to aging, to prevent binder drainage from the aggregate surface, etc. The objective of presented paper is to assess and compare effect of additives on properties of bitumen binders. In paper, the results of bitumen properties, penetration, softening point, and dynamic viscosity of two paving grade bitumen 35/50, 50/70 and polymer modified bitumen PmB 45/80-75 are analyzed and also the changes of these properties by the application of selected additives (Sasobit, Licomont BS100, Wetfix BE and CWM) to improve adhesion to aggregate and improve workability. Measurements of properties have been performed according to the relevant European standards. The laboratory tests showed significantly increasing the softening point of paving grade bitumen 50/70 and 35/50 by 13 to 45°C. The effect of various additives on bitumen softening point is different. Penetration varies according to type of bitumen and type of used additive. The penetration values of modified bitumen PmB 45/80-75 with additives Sasobit and Licomont BS100 show increase of bitumen stiffness of 16 0.1mm and a shift in the gradation. The changes in penetration and in softening point significantly shown when calculating on Penetration index as a parameter of

Significant Scales in Community Structure

NASA Astrophysics Data System (ADS)

Traag, V. A.; Krings, G.; van Dooren, P.

2013-10-01

Many complex networks show signs of modular structure, uncovered by community detection. Although many methods succeed in revealing various partitions, it remains difficult to detect at what scale some partition is significant. This problem shows foremost in multi-resolution methods. We here introduce an efficient method for scanning for resolutions in one such method. Additionally, we introduce the notion of ``significance'' of a partition, based on subgraph probabilities. Significance is independent of the exact method used, so could also be applied in other methods, and can be interpreted as the gain in encoding a graph by making use of a partition. Using significance, we can determine ``good'' resolution parameters, which we demonstrate on benchmark networks. Moreover, optimizing significance itself also shows excellent performance. We demonstrate our method on voting data from the European Parliament. Our analysis suggests the European Parliament has become increasingly ideologically divided and that nationality plays no role.

Photoactive devices including porphyrinoids with coordinating additives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K

Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths,more » increase the external quantum efficiency of the material, or both.« less

Detection of significant differences between absorption spectra of neutral helium and low temperature photoionized helium plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartnik, A.; Wachulak, P.; Fiedorowicz, H.

2013-11-15

In this work, spectral investigations of photoionized He plasmas were performed. The photoionized plasmas were created by irradiation of helium stream, with intense pulses from laser-plasma extreme ultraviolet (EUV) source. The EUV source was based on a double-stream Xe/Ne gas-puff target irradiated with 10 ns/10 J Nd:YAG laser pulses. The most intense emission from the source spanned a relatively narrow spectral region below 20 nm, however, spectrally integrated intensity at longer wavelengths was also significant. The EUV radiation was focused onto a gas stream, injected into a vacuum chamber synchronously with the EUV pulse. The long-wavelength part of the EUVmore » radiation was used for backlighting of the photoionized plasmas to obtain absorption spectra. Both emission and absorption spectra in the EUV range were investigated. Significant differences between absorption spectra acquired for neutral helium and low temperature photoionized plasmas were demonstrated for the first time. Strong increase of intensities and spectral widths of absorption lines, together with a red shift of the K-edge, was shown.« less

Unanticipated ankle inversions are significantly different from anticipated ankle inversions during drop landings: overcoming anticipation bias.

PubMed

Dicus, Jeremy R; Seegmiller, Jeff G

2012-05-01

Few ankle inversion studies have taken anticipation bias into account or collected data with an experimental design that mimics actual injury mechanisms. Twenty-three participants performed randomized single-leg vertical drop landings from 20 cm. Subjects were blinded to the landing surface (a flat force plate or 30° inversion wedge on the force plate). After each trial, participants reported whether they anticipated the landing surface. Participant responses were validated with EMG data. The protocol was repeated until four anticipated and four unanticipated landings onto the inversion wedge were recorded. Results revealed a significant main effect for landing condition. Normalized vertical ground reaction force (% body weights), maximum ankle inversion (degrees), inversion velocity (degrees/second), and time from contact to peak muscle activation (seconds) were significantly greater in unanticipated landings, and the time from peak muscle activation to maximum VGRF (second) was shorter. Unanticipated landings presented different muscle activation patterns than landings onto anticipated surfaces, which calls into question the usefulness of clinical studies that have not controlled for anticipation bias.

Statistical Significance vs. Practical Significance: An Exploration through Health Education

ERIC Educational Resources Information Center

Rosen, Brittany L.; DeMaria, Andrea L.

2012-01-01

The purpose of this paper is to examine the differences between statistical and practical significance, including strengths and criticisms of both methods, as well as provide information surrounding the application of various effect sizes and confidence intervals within health education research. Provided are recommendations, explanations and…

Significant differences in B-cell subpopulations characterize patients with chronic graft-versus-host disease-associated dysgammaglobulinemia.

PubMed

Kuzmina, Zoya; Greinix, Hildegard T; Weigl, Roman; Körmöczi, Ulrike; Rottal, Arno; Frantal, Sophie; Eder, Sandra; Pickl, Winfried F

2011-02-17

Manifestations of chronic graft-versus-host disease (cGVHD) can resemble those seen in immunodeficiency states and autoimmune disorders. Reports by us and others suggest an involvement of B cells in the pathogenesis of cGVHD. We investigated B-lymphocyte subpopulations in cGVHD cohorts defined by serum immunoglobulin G (IgG) levels to characterize novel biomarkers for impairment of humoral immunity after allogeneic hematopoietic stem cell transplantation. Seventy-six patients were enrolled a median of 46 months after hematopoietic stem cell transplantation. The hypogammaglobulinemia group had significantly diminished CD19(+) B cells (165 vs 454 vs 417 × 10⁶L) with elevated CD19(+)CD21(low) immature (16.5%, 7.7%, and 9.1%) and CD19(+)CD21(int-high)CD38(high)IgM(high) transitional (10.5% vs 4.2% vs 6.3%) B-cell proportions compared with the normogammaglobulinemia and hypergammaglobulinemia groups. CD19(+)CD10(-)CD27(-)CD21(high) naive B cells were highly elevated in all patients with cGVHD. CD19(+)CD27(+)IgD(+) non-class-switched (4 vs 12 vs 11 × 10⁶/L) and class-switched (7 vs 35 vs 42 × 10⁶/L) memory B cells were significantly lower in the hypogammaglobulinemia group compared with the others. Besides significantly higher B-cell activation factor/B-cell ratios, significantly more cGVHD patients with hypergammaglobulinemia had autoantibodies compared with the hypogammaglobulinemia subgroup (68% vs 24%, P = .024). In conclusion, B-cell subpopulations can serve as novel cellular biomarkers for immunodeficiency and autoimmunity indicating different pathogenetic mechanisms of cGVHD and encouraging future prospective longitudinal studies.

Significant Differences in Pediatric Psychotropic Side Effects: Implications for School Performance

ERIC Educational Resources Information Center

Kubiszyn, Thomas; Mire, Sarah; Dutt, Sonia; Papathopoulos, Katina; Burridge, Andrea Backsheider

2012-01-01

Some side effects (SEs) of increasingly prescribed psychotropic medications can impact student performance in school. SE risk varies, even among drugs from the same class (e.g., antidepressants). Knowing which SEs occur significantly more often than others may enable school psychologists to enhance collaborative risk-benefit analysis, medication…

Geometric differences of the mitral apparatus between ischemic and dilated cardiomyopathy with significant mitral regurgitation: real-time three-dimensional echocardiography study

NASA Technical Reports Server (NTRS)

Kwan, Jun; Shiota, Takahiro; Agler, Deborah A.; Popovic, Zoran B.; Qin, Jian Xin; Gillinov, Marc A.; Stewart, William J.; Cosgrove, Delos M.; McCarthy, Patrick M.; Thomas, James D.

2003-01-01

BACKGROUND: This study was conducted to elucidate the geometric differences of the mitral apparatus in patients with significant mitral regurgitation caused by ischemic cardiomyopathy (ICM-MR) and by idiopathic dilated cardiomyopathy (DCM-MR) by use of real-time 3D echocardiography (RT3DE). METHODS AND RESULTS: Twenty-six patients with ICM-MR caused by posterior infarction, 18 patients with DCM-MR, and 8 control subjects were studied. With the 3D software, commissure-commissure plane and 3 perpendicular anteroposterior (AP) planes were generated for imaging the medial, central, and lateral sides of the mitral valve (MV) during mid systole. In 3 AP planes, the angles between the annular plane and each leaflet (anterior, Aalpha; posterior, Palpha) were measured. In ICM-MR, Aalpha measured in the medial and central planes was significantly larger than that in the lateral plane (39+/-5 degrees, 34+/-6 degrees, and 27+/-5 degrees, respectively; P<0.01), whereas Palpha showed no significant difference in any of the 3 AP planes (61+/-7 degrees, 57+/-7 degrees, and 56+/-7 degrees, P>0.05). In DCM-MR, both Aalpha (38+/-8 degrees, 37+/-9 degrees, and 36+/-7 degrees, P>0.05) and Palpha (59+/-6 degrees, 58+/-5 degrees, and 57+/-6 degrees, P>0.05) revealed no significant differences in the 3 planes. CONCLUSIONS: The pattern of MV deformation from the medial to the lateral side was asymmetrical in ICM-MR, whereas it was symmetrical in DCM-MR. RT3DE is a helpful tool for differentiating the geometry of the mitral apparatus between these 2 different types of functional mitral regurgitation.

Lack of significant differences in immunity against diphtheria between populations of Eastern and Western regions of Poland.

PubMed

Chudnicka, Alina; Walory, Jarosław

2003-01-01

Incidents of diphtheria in countries which were formerly part of the Soviet Union (Ukraine, Russia and Belorus) resulted in the need to evaluate thoroughly the effectiveness of preventive vaccination in Poland, especially in the border regions of the country where the biggest migration of population can be observed. The aim of this work was a comparison of the immunity to diphtheria in two geographically different regions of Poland--eastern (Lublin) and western (Zielona Gora) ones. It showed immunoprophylaxis to diphtheria that was implemented on these areas. Diphtheria antitoxin level (IgG) was determined with application of the ELISA method in 1236 (529/707) people. No significant differences were found in the level of antibodies in the groups < 2 years of age and > 19 years of age in people below the protective titre (0.1 IU/ml). The difference occurring in the interval between 2nd and 18th year of life (in western Poland 7.6% and in eastern Poland 16%) may result from different implementation of the vaccination program in these regions (booster doses). Recommendations for vaccination to diphtheria in people over 25 years of age should be implemented especially in the frontier regions of Poland adjoining countries threatened with diphtheria occurrence.

Application of addition-cured silicone denture relining materials to adjust mouthguards.

PubMed

Fukasawa, Shintaro; Churei, Hiroshi; Chowdhury, Ruman Uddin; Shirako, Takahiro; Shahrin, Sharika; Shrestha, Abhishekhi; Wada, Takahiro; Uo, Motohiro; Takahashi, Hidekazu; Ueno, Toshiaki

2016-01-01

The purposes of this study were to examine the shock absorption capability of addition-cured silicone denture relining materials and the bonding strength of addition-cured silicone denture relining materials and a commercial mouthguard material to determine its applicability to mouthguard adjustment. Two addition-cured silicone denture relining materials and eleven commercial mouthguard materials were selected as test materials. The impact test was applied by a free-falling steel ball. On the other hand, bonding strength was determined by a delamination test. After prepared surface treatments using acrylic resin on MG sheet surface, 2 types of addition-cured silicone denture relining materials were glued to MG surface. The peak intensity, the time to peak intensity from the onset of the transmitted force and bonding strength were statistically analyzed using ANOVA and Tukey's honest significant difference post hoc test (p<0.05). These results suggest that the silicone denture relining materials could be clinically applicable as a mouthguard adjustment material.

Lidocaine Concentration in Oral Tissue by the Addition of Epinephrine

PubMed Central

Tanaka, Eri; Yoshida, Kenji; Kawaai, Hiroyoshi; Yamazaki, Shinya

2016-01-01

The vasoconstrictive effect due to the addition of epinephrine to local anesthetic has been clearly shown by measuring blood-flow volume or blood anesthetic concentration in oral mucosal tissue. However, there are no reports on the measurement of anesthetic concentration using samples directly taken from the jawbone and oral mucosal tissue. Consequently, in this study, the effect of lidocaine concentration in the jawbone and oral mucosal tissue by the addition of epinephrine to the local anesthetic lidocaine was considered by quantitatively measuring lidocaine concentration within the tissue. Japanese white male rabbits (n = 96) were used as test animals. General anesthesia was induced by sevoflurane and oxygen, and then cannulation to the femoral artery was performed while arterial pressure was constantly recorded. Infiltration anesthesia was achieved by 0.5 mL of 2% lidocaine containing 1 : 80,000 epinephrine in the upper jawbone (E+) and 0.5 mL of 2% of epinephrine additive–free lidocaine (E0) under the periosteum. At specified time increments (10, 20, 30, 40, 50, and 60 minutes), samples from the jawbone, oral mucosa, and blood were collected, and lidocaine concentration was directly measured by high-performance liquid chromatography. No significant differences in the change in blood pressure were observed either in E+ or E0. In both E+ and E0 groups, the serum lidocaine concentration peaked 10 minutes after local anesthesia and decreased thereafter. At all time increments, serum lidocaine concentration in E+ was significantly lower than that in E0. There were no significant differences in measured lidocaine concentration between jawbone and mucosa within either the E+ or the E0 groups at all time points, although the E0 group had significantly lower jawbone and mucosa concentrations than the E+ group at all time points when comparing the 2 groups to each other. Addition of epinephrine to the local anesthetic inhibited systemic absorption of local

Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators.

PubMed

Memon, Muhammad Usman; Lim, Sungjoon

2017-09-09

The significant improvements observed in the field of bulk-production of printed microchip technologies in the past decade have allowed the fabrication of microchip printing on numerous materials including organic and flexible substrates. Printed sensors and electronics are of significant interest owing to the fast and low-cost fabrication techniques used in their fabrication. The increasing amount of research and deployment of specially printed electronic sensors in a number of applications demonstrates the immense attention paid by researchers to this topic in the pursuit of achieving wider-scale electronics on different dielectric materials. Although there are many traditional methods for fabricating radio frequency (RF) components, they are time-consuming, expensive, complicated, and require more power for operation than additive fabrication methods. This paper serves as a summary/review of improvements made to the additive printing technologies. The article focuses on three recently developed printing methods for the fabrication of wireless sensors operating at microwave frequencies. The fabrication methods discussed include inkjet printing, three-dimensional (3D) printing, and screen printing.

Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators

PubMed Central

2017-01-01

The significant improvements observed in the field of bulk-production of printed microchip technologies in the past decade have allowed the fabrication of microchip printing on numerous materials including organic and flexible substrates. Printed sensors and electronics are of significant interest owing to the fast and low-cost fabrication techniques used in their fabrication. The increasing amount of research and deployment of specially printed electronic sensors in a number of applications demonstrates the immense attention paid by researchers to this topic in the pursuit of achieving wider-scale electronics on different dielectric materials. Although there are many traditional methods for fabricating radio frequency (RF) components, they are time-consuming, expensive, complicated, and require more power for operation than additive fabrication methods. This paper serves as a summary/review of improvements made to the additive printing technologies. The article focuses on three recently developed printing methods for the fabrication of wireless sensors operating at microwave frequencies. The fabrication methods discussed include inkjet printing, three-dimensional (3D) printing, and screen printing. PMID:28891947

Control of abusive water addition to Octopus vulgaris with non-destructive methods.

PubMed

Mendes, Rogério; Schimmer, Ove; Vieira, Helena; Pereira, João; Teixeira, Bárbara

2018-01-01

Abusive water addition to octopus has evidenced the need for quick non-destructive methods for product qualification in the industry and control of fresh commercial products in markets. Electric conductivity (EC)/pH and dielectric property measurements were selected to detect water uptake in octopus. A significant EC decrease was determined after soaking octopus in freshwater for 4 h. EC reflected the water uptake of octopus and the correspondent concentration decrease of available ions in the interstitial fluid. Significant correlations were determined between octopus water uptake, EC (R = -0.940) and moisture/protein (M/P) ratio (R = 0.923) changes. Seasonal and spatial variation in proximate composition did not introduce any uncertainty in EC discrimination of freshwater tampering. Immersion in 5 g L -1 sodium tripolyphosphate (STPP) increased EC to a value similar to control octopus. EC false negatives resulting from the use of additives (STPP and citric acid) were eliminated with the additional determination of pH. Octopus soaked in freshwater, STPP and citric acid can also be clearly discriminated from untreated samples (control) and also from frozen (thawed) ones using the dielectric properties. No significant differences in the dielectric property scores were found between octopus sizes or geographical locations. Simultaneous EC/pH or dielectric property measurements can be used in a handheld device for non-destructive water addition detection in octopus. M/P ratio can be used as a reference destructive method. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Flow Cytometry Method Analysis of Apoptosis: No Significant Difference Between EDTA and EDTA-free Trypsin Treatment Procedure.

PubMed

Xu, Xiao-yan; Nie, Xiao-cui; Ma, Hai-ying; Song, Guo-qing; Zhang, Xiao-tong; Jin, Yu-nan; Yu, Yan-qiu

2015-04-01

Flow cytometry method (FCM) is a generally accepted tool to analyze apoptosis. Although apoptosis assay kit was applied by many companies, the manufacturers were not consistent with whether using Trypsin with EDTA to collect the adherent cells. In another words, the influence of EDTA on apoptotic ratio is not clear. In this work, we compared the proportion of apoptotic cells with EDTA or EDTA-free Trypsin treatment by FCM. We concluded that Trypsin with or without EDTA has little influence on the proportion of apoptotic cells. In addition, we found that the ratio of necrosis and apoptosis was different in cells collected by scraping. WAVE2 protein was analyzed as a typical example for movement related protein. WAVE2 expression is elevated in the EDTA Trypsin treated group, compared with EDTA-free Trypsin treatment and scrapping group. © The Author(s) 2014.

Significant lexical relationships

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pedersen, T.; Kayaalp, M.; Bruce, R.

Statistical NLP inevitably deals with a large number of rare events. As a consequence, NLP data often violates the assumptions implicit in traditional statistical procedures such as significance testing. We describe a significance test, an exact conditional test, that is appropriate for NLP data and can be performed using freely available software. We apply this test to the study of lexical relationships and demonstrate that the results obtained using this test are both theoretically more reliable and different from the results obtained using previously applied tests.

Effect of vital bleaching with solutions containing different concentrations of hydrogen peroxide and pineapple extract as an additive on human enamel using reflectance spectrophotometer: An in vitro study

PubMed Central

Vejai Vekaash, Chitra Janardhanan; Kumar Reddy, Tripuravaram Vinay; Venkatesh, Kondas Vijay

2017-01-01

Aim: This study aims to evaluate the color change in human enamel bleached with three different concentrations of hydrogen peroxide, containing pineapple extract as an additive in two different timings, using reflectance spectrophotometer. Background: The study aimed to investigate the bleaching efficacy on natural teeth using natural enzymes. Materials and Methods: Baseline color values of 10 randomly selected artificially stained incisors were obtained. The specimens were divided into three groups of 20 teeth each: Group 1 – 30% hydrogen peroxide, Group II – 20% hydrogen peroxide, and Group III – 10% hydrogen peroxide. One half of the tooth was bleached with hydrogen peroxide, and other was bleached with hydrogen peroxide and pineapple extract for 20 min (Subgroup A) and 10 min (Subgroup B). Statistical Analysis: The results were statistically analyzed using student's t-test. Results: The mean ΔE values of Group IA (31.62 ± 0.9), Group IIA (29.85 ± 1.2), and Group IIIA (28.65 ± 1.2) showed statistically significant higher values when compared to the mean Δ E values of Group 1A (25.02 ± 1.2), Group IIA (22.86 ± 1.1), and Group IIIA (16.56 ± 1.1). Identical results were obtained in Subgroup B. Conclusion: The addition of pineapple extract to hydrogen peroxide resulted in effective bleaching. PMID:29386782

Characterizations of milkfish (Chanos chanos) meatballs as effect of nanoencapsulation liquid smoke addition

NASA Astrophysics Data System (ADS)

Swastawati, Fronthea; Ambaryanto; Cahyono, Bambang; Wijayanti, Ima; Chilmawati, Diana

2018-02-01

Milkfish meatballs are one of the value-added product that is potential to be developed because this product is favored by consumers. The aims of this study were mainly to evaluate the effect of nano encapsulation liquid smoke addition to the properties of milkfish meatballs. The different concentration (0%, 1%, 3% and 5%) of nano encapsulation liquid smoke was treated into milkfish meatballs with three replications. Test parameters used include texture (hardness, deformation and gel strength); proximate (moisture, protein, fat, ash and carbohydrates content); sensory (organoleptic and hedonic). Parametric data were analysis using ANOVA and non-parametric parameters using Kruskal Wallis test. Analysis of variant shows that nanoencapsulation gave significant effect on the hardness, deformation, and gel strength; protein, lipid, ash and water content(P<0,05), but gave no significant effect on carbohydrate (P >0.05). The best texture characteristic was obtained by milkfish meatball added with 1% of nanoencapsulation liquid smoke indicated by the moisture water; protein; fat; ash and carbohydrate content: 66,35%; 12,69%; 6,75%; 2,42% and 5,93% respectively. The best organoleptic and hedonic value of milkfish meatballs was achieved by a panelist at the sample with the addition of 1% liquid smoke, but this sample found gave no significance different to control in terms of sensory valle.

Compost Addition Enhanced Hyphal Growth and Sporulation of Arbuscular Mycorrhizal Fungi without Affecting Their Community Composition in the Soil

PubMed Central

Yang, Wei; Gu, Siyu; Xin, Ying; Bello, Ayodeji; Sun, Wenpeng; Xu, Xiuhong

2018-01-01

Arbuscular mycorrhizal (AM) fungi form symbiotic associations with most crop plant species in agricultural ecosystems, and are conspicuously influenced by various agricultural practices. To understand the impact of compost addition on AM fungi, we examined effect of four compost rates (0, 11.25, 22.5, and 45 Mg/ha) on the abundance and community composition of AM fungi in seedling, flowering, and mature stage of soybean in a 1-year compost addition experiment system in Northeast China. Soybean [Glycine max (L.) Merrill] was used as test plant. Moderate (22.5 Mg/ha) and high (45 Mg/ha) levels of compost addition significantly increased AM root colonization and extraradical hyphal (ERH) density compared with control, whereas low (11.5 Mg/ha) level of compost addition did not cause significant increase in AM root colonization and ERH density. AM fungal spore density was significantly enhanced by all the compost rates compared with control. The temporal variations analysis revealed that, AM root colonization in seedling stage was significantly lower than in flowering and mature stage. Although AM fungal operational taxonomic unit richness and community composition was unaffected by compost addition, some abundant AM fungal species showed significantly different response to compost addition. In mature stage, Rhizophagus fasciculatum showed increasing trend along with compost addition gradient, whereas the opposite was observed with Paraglomus sp. In addition, AM fungal community composition exhibited significant temporal variation during growing season. Further analysis indicated that the temporal variation in AM fungal community only occurred in control treatment, but not in low, moderate, and high level of compost addition treatments. Our findings highlighted the significant effects of compost addition on AM growth and sporulation, and emphasized that growth stage is a stronger determinant than 1-year compost addition in shaping AM fungal community in black soil of

Compost Addition Enhanced Hyphal Growth and Sporulation of Arbuscular Mycorrhizal Fungi without Affecting Their Community Composition in the Soil.

PubMed

Yang, Wei; Gu, Siyu; Xin, Ying; Bello, Ayodeji; Sun, Wenpeng; Xu, Xiuhong

2018-01-01

Arbuscular mycorrhizal (AM) fungi form symbiotic associations with most crop plant species in agricultural ecosystems, and are conspicuously influenced by various agricultural practices. To understand the impact of compost addition on AM fungi, we examined effect of four compost rates (0, 11.25, 22.5, and 45 Mg/ha) on the abundance and community composition of AM fungi in seedling, flowering, and mature stage of soybean in a 1-year compost addition experiment system in Northeast China. Soybean [ Glycine max (L.) Merrill] was used as test plant. Moderate (22.5 Mg/ha) and high (45 Mg/ha) levels of compost addition significantly increased AM root colonization and extraradical hyphal (ERH) density compared with control, whereas low (11.5 Mg/ha) level of compost addition did not cause significant increase in AM root colonization and ERH density. AM fungal spore density was significantly enhanced by all the compost rates compared with control. The temporal variations analysis revealed that, AM root colonization in seedling stage was significantly lower than in flowering and mature stage. Although AM fungal operational taxonomic unit richness and community composition was unaffected by compost addition, some abundant AM fungal species showed significantly different response to compost addition. In mature stage, Rhizophagus fasciculatum showed increasing trend along with compost addition gradient, whereas the opposite was observed with Paraglomus sp. In addition, AM fungal community composition exhibited significant temporal variation during growing season. Further analysis indicated that the temporal variation in AM fungal community only occurred in control treatment, but not in low, moderate, and high level of compost addition treatments. Our findings highlighted the significant effects of compost addition on AM growth and sporulation, and emphasized that growth stage is a stronger determinant than 1-year compost addition in shaping AM fungal community in black soil of

Heat resistance of Bacillus cereus spores: effects of milk constituents and stabilizing additives.

PubMed

Mazas, M; López, M; Martínez, S; Bernardo, A; Martin, R

1999-04-01

Heat resistance of Bacillus cereus spores (ATCC 7004, 4342, and 9818) heated in different types of milk (skim, whole, and concentrated skim milk), skim milk containing stabilizing additives (sodium citrate, monopotassium phosphate, or disodium phosphate, 0.1%), and cream was investigated. Thermal resistance experiments were performed at temperatures within the range of 92 to 115 degrees C under continuous monitoring of pH. For strain 4342 no significant differences (P < 0.05) in D values were detected in any case. For strains 7004 and 9818 higher D values of about 20% were obtained in whole and concentrated skim milk than those calculated in skim milk. From all stabilizing additives tested, only sodium citrate and sodium phosphate increased the heat resistance for strain 9818. However, when the menstruum pH was measured at the treatment temperature, different pH values were found between the heating media. The differences in heat resistance observed could be due to a pH effect rather than to the difference in the substrates in which spores were heated. In contrast, when cream (fat content 20%) was used, lower D values were obtained, especially for strains 7004 and 9818. z values were not significantly modified by the milk composition, with an average z value of 7.95+/-0.20 degrees C for strain 7004, 7.88+/-0.10 degrees C for strain 4342, and 9.13+/-0.16 degrees C for strain 9818.

No significant differences in short-term renal prognosis between living kidney donors with and without diabetes.

PubMed

Shinzato, Takahiro; Kurosawa, Akira; Kubo, Taro; Shimizu, Toshihiro; Kimura, Takaaki; Nanmoku, Koji; Yagisawa, Takashi

2018-06-01

Renal prognosis in living kidney donors with diabetes is currently not known. In this study, we sought to investigate renal prognosis in living kidney donors with diabetes. We retrospectively investigated 241 living kidney donors who underwent nephrectomy at Jichi Medical University Hospital between January 2000 and December 2015. Donors with a follow-up period of less than 1 year were excluded. The remaining donors were divided into a diabetic group and a non-diabetic group. Their clinical parameters before donation and renal prognosis after donation were compared. Of the 241 donors, 16 were excluded due to their follow-up period being less than 1 year. Of the remaining 225 donors, 14 were diabetic and 211 were non-diabetic. There were no significant differences in variables at pre-donation. The median follow-up period was 4.3 (1.5-10.7) and 4.6 (1.0-13.0) years in kidney donors with and without diabetes, respectively. At the end of follow-up, the estimated glomerular filtration rate was 51.7 ± 7.1 ml/min/1.73 m 2 in the diabetic group and 52.1 ± 12.2 ml/min/1.73 m 2 (p = 0.906) in the non-diabetic group; urine albumin excretion was 9.5 (2-251) mg/day (or mg/g creatinine) in the diabetic group and 6 (0-626) mg/day (or mg/g creatinine) in the non-diabetic group (p = 0.130); and urine protein excretion was 0.079 (0-0.41) g/day in the diabetic group and 0.051 (0-3.7) g/day in the non-diabetic group (p = 0.455). There were no significant differences in short-term renal prognosis between kidney donors with and without diabetes.

Effects of rye bran addition on fatty acid composition and quality characteristics of low-fat meatballs.

PubMed

Yılmaz, Ismail

2004-06-01

Rye bran was used as a fat substitute in the production of meatballs. The effect of rye bran addition on the fatty acid composition, trans fatty acids, total fat, some physico-chemical and sensory properties of the samples was studied. Meatballs were produced with four different formulations including 5%, 10%, 15% and 20% rye bran addition. Control samples were formulated with 10% fat addition. Meatballs containing rye bran had lower concentrations of total fat and total trans fatty acids than the control samples. Meatballs made with addition of 20% rye bran had the highest protein, ash contents, L value (lightness), b value (yellowness), and the lowest moisture, salt content and weight losses and a value (redness). There was a significant difference among the meatball samples in respect to sensory properties and 5%, 10% rye bran added meatballs and control samples had high acceptability.

Effect of Exogenous Phytase Addition on Soil Phosphatase Activities: a Fluorescence Spectroscopy Study.

PubMed

Yang, Xiao-zhu; Chen, Zhen-hua; Zhang, Yu-lan; Chen, Li-jun

2015-05-01

The utilization of organic phosphorus (P) has directly or indirectly improved after exogenous phytase was added to soil. However, the mechanism by which exogenous phytase affected the soil phosphatases (phosphomonoesterase and phosphodiesterase) activities was not clear. The present work was aimed to study red soil, brown soil and cinnamon soil phosphomonoesterase (acid and alkaline) (AcP and AlP) and phosphodiesterase (PD) activities responding to the addition of exogenous phytase (1 g phytase/50 g air dry soil sample) based on the measurements performed via a fluorescence detection method combined with 96 microplates using a TECAN Infinite 200 Multi-Mode Microplate Reader. The results indicated that the acid phosphomonoesterase activity was significantly enhanced in red soil (p≤0. 01), while it was significantly reduced in cinnamon soil; alkaline phosphomonoesterase activity was significantly enhanced in cinnamon soil (p≤ 0. 01), while it was significantly reduced in red soil; phosphodiesterase activity was increased in three soils but it was significantly increased in brown soil (p≤0. 01) after the addition of exogenous phytase. The activities still remained strong after eight days in different soils, which indicated that exogenous phytase addition could be enhance soil phosphatases activities effectively. This effect was not only related to soil properties, such as pH and phosphorus forms, but might also be related to the excreted enzyme amount of the stimulating microorganism. Using fluorescence spectroscopy to study exogenous phytase addition influence on soil phosphatase activities was the first time at home and abroad. Compared with the conventional spectrophotometric method, the fluorescence microplate method is an accurate, fast and simple to use method to determine the relationships among the soil phosphatases activities.

Biogeographic differences in soil biota promote invasive grass response to nutrient addition relative to co-occurring species despite lack of belowground enemy release.

PubMed

Broadbent, Arthur A D; Stevens, Carly J; Ostle, Nicholas J; Orwin, Kate H

2018-03-01

Multiple plant species invasions and increases in nutrient availability are pervasive drivers of global environmental change that often co-occur. Many plant invasion studies, however, focus on single-species or single-mechanism invasions, risking an oversimplification of a multifaceted process. Here, we test how biogeographic differences in soil biota, such as belowground enemy release, interact with increases in nutrient availability to influence invasive plant growth. We conducted a greenhouse experiment using three co-occurring invasive grasses and one native grass. We grew species in live and sterilized soil from the invader's native (United Kingdom) and introduced (New Zealand) ranges with a nutrient addition treatment. We found no evidence for belowground enemy release. However, species' responses to nutrients varied, and this depended on soil origin and sterilization. In live soil from the introduced range, the invasive species Lolium perenne L. responded more positively to nutrient addition than co-occurring invasive and native species. In contrast, in live soil from the native range and in sterilized soils, there were no differences in species' responses to nutrients. This suggests that the presence of soil biota from the introduced range allowed L. perenne to capture additional nutrients better than co-occurring species. Considering the globally widespread nature of anthropogenic nutrient additions to ecosystems, this effect could be contributing to a global homogenization of flora and the associated losses in native species diversity.

Co-occurring nonnative woody shrubs have additive and non-additive soil legacies.

PubMed

Kuebbing, Sara E; Patterson, Courtney M; Classen, Aimée T; Simberloff, Daniel

2016-09-01

To maximize limited conservation funds and prioritize management projects that are likely to succeed, accurate assessment of invasive nonnative species impacts is essential. A common challenge to prioritization is a limited knowledge of the difference between the impacts of a single nonnative species compared to the impacts of nonnative species when they co-occur, and in particular predicting when impacts of co-occurring nonnative species will be non-additive. Understanding non-additivity is important for management decisions because the management of only one co-occurring invader will not necessarily lead to a predictable reduction in the impact or growth of the other nonnative plant. Nonnative plants are frequently associated with changes in soil biotic and abiotic characteristics, which lead to plant-soil interactions that influence the performance of other species grown in those soils. Whether co-occurring nonnative plants alter soil properties additively or non-additively relative to their effects on soils when they grow in monoculture is rarely addressed. We use a greenhouse plant-soil feedback experiment to test for non-additive soil impacts of two common invasive nonnative woody shrubs, Lonicera maackii and Ligustrum sinense, in deciduous forests of the southeastern United States. We measured the performance of each nonnative shrub, a native herbaceous community, and a nonnative woody vine in soils conditioned by each shrub singly or together in polyculture. Soils conditioned by both nonnative shrubs had non-additive impacts on native and nonnative performance. Root mass of the native herbaceous community was 1.5 times lower and the root mass of the nonnative L. sinense was 1.8 times higher in soils conditioned by both L. maackii and L. sinense than expected based upon growth in soils conditioned by either shrub singly. This result indicates that when these two nonnative shrubs co-occur, their influence on soils disproportionally favors persistence

The addition of ticarcillin-clavulanic acid to INRA 96 extender for stallion semen cooling.

PubMed

Dean, C J; Hobgood, A M; Blodgett, G P; Love, C C; Blanchard, T L; Varner, D D

2012-12-01

A commonly used commercial extender (i.e. INRA 96) contains antimicrobials that may have limited effectiveness. Therefore, addition of ticarcillin-clavulanic acid to this extender is a widespread procedure in the equine breeding industry in the United States. However, such practice has not been critically evaluated. To evaluate the addition of ticarcillin-clavulanic acid to INRA 96 and different extender and antimicrobial storage conditions on sperm function and antimicrobial effectiveness. Gel-free semen (42 ejaculates from 14 mature Quarter Horse stallions) was extended with INRA 96 and stored for 24 h in an Equitainer II. The effects of added ticarcillin-clavulanic acid and different extender storage procedures on sperm motion characteristics (by computer-assisted analysis), sperm membrane integrity (by fluorescence-based measurement) and suppression of bacterial growth (by aerobic and anaerobic culture methods) were evaluated using analysis-of-variance and Chi-square statistical methods. The P value for significance was set at < 0.05. Freezing and thawing of modified or unmodified extender prior to use for stallion semen resulted in reduced sperm quality post cooling for 24 h, as evidenced by a significant reduction in sperm motility (i.e. total and progressive) and sperm membrane integrity. Addition of ticarcillin-clavulanic acid to extender resulted in higher sperm velocity when the reconstituted antimicrobial was subjected to cooled storage, as compared with frozen storage, prior to use. Only 28 of 42 ejaculates (67%) yielded presence of bacteria in neat semen but addition of ticarcillin-clavulanic acid to INRA 96 was not different than INRA 96 alone for inhibiting growth of bacteria (98 vs. 94%, respectively). Addition of ticarcillin-clavulanic acid (1 mg/ml) to INRA 96 did not adversely affect sperm quality in extended semen after cooled storage. Extender freezing and thawing prior to use had detrimental effects on sperm quality. These data suggest that

Different continuous cropping spans significantly affect microbial community membership and structure in a vanilla-grown soil as revealed by deep pyrosequencing.

PubMed

Xiong, Wu; Zhao, Qingyun; Zhao, Jun; Xun, Weibing; Li, Rong; Zhang, Ruifu; Wu, Huasong; Shen, Qirong

2015-07-01

In the present study, soil bacterial and fungal communities across vanilla continuous cropping time-series fields were assessed through deep pyrosequencing of 16S ribosomal RNA (rRNA) genes and internal transcribed spacer (ITS) regions. The results demonstrated that the long-term monoculture of vanilla significantly altered soil microbial communities. Soil fungal diversity index increased with consecutive cropping years, whereas soil bacterial diversity was relatively stable. Bray-Curtis dissimilarity cluster and UniFrac-weighted principal coordinate analysis (PCoA) revealed that monoculture time was the major determinant for fungal community structure, but not for bacterial community structure. The relative abundances (RAs) of the Firmicutes, Actinobacteria, Bacteroidetes, and Basidiomycota phyla were depleted along the years of vanilla monoculture. Pearson correlations at the phyla level demonstrated that Actinobacteria, Armatimonadetes, Bacteroidetes, Verrucomicrobia, and Firmicutes had significant negative correlations with vanilla disease index (DI), while no significant correlation for fungal phyla was observed. In addition, the amount of the pathogen Fusarium oxysporum accumulated with increasing years and was significantly positively correlated with vanilla DI. By contrast, the abundance of beneficial bacteria, including Bradyrhizobium and Bacillus, significantly decreased over time. In sum, soil weakness and vanilla stem wilt disease after long-term continuous cropping can be attributed to the alteration of the soil microbial community membership and structure, i.e., the reduction of the beneficial microbes and the accumulation of the fungal pathogen.

Effect of additive on Zeta potential and particle size of nickel nanoparticles

NASA Astrophysics Data System (ADS)

Sharma, Vikash; Tarachand, Chotia, Chandrabhan; Okram, G. S.

2017-05-01

Nickel nanoparticles (NPs) were prepared by thermal decomposition method using Oleylamine (OLY) as a solvent and Trioctylphosphine (TOP) as a surfactant. We have investigated the effect of pH and addition of Ethylenediamine tetraacetic acid (EDTA) on the stability and particle size of Ni NPs using zeta potential and particle size analyser. Coating of the surfactants on the surface of Ni NPs was confirmed by Fourier transform infrared (FTIR) spectroscopy. Autotitration study of zeta potential of these NPs in ethanol by dynamic light scattering (DLS) at different pH values confirmed an isoelectric point (IEP) at pH = 3.64 in ethanol and pH = 3.04 after addition of EDTA in ethanol. It was observed that addition of EDTA in nanosuspension enhances stability of Ni-NPs significantly.

The effect of additional physiotherapy to hospital inpatients outside of regular business hours: a systematic review.

PubMed

Brusco, Natasha K; Paratz, Jennifer

2006-12-01

Provision of out of regular business hours (OBH) physiotherapy to hospital inpatients is widespread in the hospital setting. This systematic review evaluated the effect of additional OBH physiotherapy services on patient length of stay (LOS), pulmonary complications, discharge destination, discharge mobility status, quality of life, cost saving, adverse events, and mortality compared with physiotherapy only within regular business hours. A literature search was completed on databases with citation tracking using key words. Two reviewers completed data extraction and quality assessment independently by using modified scales for historical cohorts and case control studies as well as the PEDro scale for randomized controlled trials and quasi-randomised controlled trials. This search identified nine articles of low to medium quality. Four reported a significant reduction in LOS associated with additional OBH physiotherapy, with two articles reporting overall significance and two reporting only for specific subgroups. Two studies reported significant reduction in pulmonary complications for two different patient groups in an intensive care unit (ICU) with additional OBH physiotherapy. Three studies accounted for discharge destination and/or discharge mobility status with no significant difference reported. Quality of life, adverse events, and mortality were not reported in any studies. Cost savings were considered in three studies, with two reporting a cost saving. This systematic review was unable to conclude that the provision of additional OBH physiotherapy made significant improvement to patient outcomes for all subgroups of inpatients. One study in critical care reported that overnight physiotherapy decreased LOS and reduced pulmonary complications of patients in the ICU. However, the studies in the area of orthopaedics, neurology, postcardiac surgery, and rheumatology, which all considered additional daytime weekend physiotherapy intervention, did not provide

Significantly enhanced production of acarbose in fed-batch fermentation with the addition of S-adenosylmethionine.

PubMed

Sun, Li-Hui; Li, Ming-Gang; Wang, Yuan-Shan; Zheng, Yu-Guo

2012-06-01

Acarbose, a pseudo-oligosaccharide, is widely used clinically in therapies for non-insulin-dependent diabetes. In the present study, S-adenosylmethionine (SAM) was added to selected media in order to investigate its effect on acarbose fermentation by Actinoplanes utahensis ZJB- 08196. Acarbose titer was seen to increase markedly when concentrations of SAM were added over a period of time. The effects of glucose and maltose on the production of acarbose were investigated in both batch and fed-batch fermentation. Optimal acarbose production was observed at relatively low glucose levels and high maltose levels. Based on these results, a further fed-batch experiment was designed so as to enhance the production of acarbose. Fed-batch fermentation was carried out at an initial glucose level of 10 g/l and an initial maltose level of 60 g/l. Then, 12 h post inoculation, 100 micromol/l SAM was added. In addition, 8 g/l of glucose was added every 24 h, and 20 g/l of maltose was added at 96 h. By way of this novel feeding strategy, the maximum titer of acarbose achieved was 6,113 mg/l at 192 h. To our knowledge, the production level of acarbose achieved in this study is the highest ever reported.

The physicochemical quality and meat microstructure of post laying hen with addition of Biduri (Calotropis gigantea) latex extract

NASA Astrophysics Data System (ADS)

Nuhriawangsa, A. M. P.; Hertanto, B. S.; Kartikasari, L. R.; Swastike, W.; Cahyadi, M.; Rasid, S.

2018-01-01

The objective of this study was to evaluate the effect of extract level of Biduri latex on the meat quality of laying hens. The materials of this research were Biduri latex and thigh meat from hens strain Lohman. The latex was tapped from a young tissue stem and centrifuged for its supernatant. Meats were smeared with latex, punctured and incubated for 30 minutes. Concentrations of latex were 0, 3, 6 and 9% from the weight of meat (w/w). The variables were water, dissolved protein, crude fat content, tenderness and microstructure of meat. The statistical analysis method using ANOVA and if there was a mean difference, Duncan test was used. Descriptive analysis was used for microstructures of meat by comparing its hydrolysis conditions. The study showed that fat had significant difference (P <0.05), dissolved protein and tenderness had very significance (P <0.01). Descriptive analysis showed that there were different compositions of microstructures on meat structure. The fat content increased with addition of 3% latex. The value of dissolved protein increased but tenderness decreased by addition extract of 6% latex. The addition of Biduri latex extract showed that hydrolysis in the microstructure of meat. The addition of 6% latex was the best meat quality.

Amino-Acid Network Clique Analysis of Protein Mutation Non-Additive Effects: A Case Study of Lysozme.

PubMed

Ming, Dengming; Chen, Rui; Huang, He

2018-05-10

Optimizing amino-acid mutations in enzyme design has been a very challenging task in modern bio-industrial applications. It is well known that many successful designs often hinge on extensive correlations among mutations at different sites within the enzyme, however, the underpinning mechanism for these correlations is far from clear. Here, we present a topology-based model to quantitively characterize non-additive effects between mutations. The method is based on the molecular dynamic simulations and the amino-acid network clique analysis. It examines if the two mutation sites of a double-site mutation fall into to a 3-clique structure, and associates such topological property of mutational site spatial distribution with mutation additivity features. We analyzed 13 dual mutations of T4 phage lysozyme and found that the clique-based model successfully distinguishes highly correlated or non-additive double-site mutations from those additive ones whose component mutations have less correlation. We also applied the model to protein Eglin c whose structural topology is significantly different from that of T4 phage lysozyme, and found that the model can, to some extension, still identify non-additive mutations from additive ones. Our calculations showed that mutation non-additive effects may heavily depend on a structural topology relationship between mutation sites, which can be quantitatively determined using amino-acid network k -cliques. We also showed that double-site mutation correlations can be significantly altered by exerting a third mutation, indicating that more detailed physicochemical interactions should be considered along with the network clique-based model for better understanding of this elusive mutation-correlation principle.

Widespread non-additive and interaction effects within HLA loci modulate the risk of autoimmune diseases.

PubMed

Lenz, Tobias L; Deutsch, Aaron J; Han, Buhm; Hu, Xinli; Okada, Yukinori; Eyre, Stephen; Knapp, Michael; Zhernakova, Alexandra; Huizinga, Tom W J; Abecasis, Gonçalo; Becker, Jessica; Boeckxstaens, Guy E; Chen, Wei-Min; Franke, Andre; Gladman, Dafna D; Gockel, Ines; Gutierrez-Achury, Javier; Martin, Javier; Nair, Rajan P; Nöthen, Markus M; Onengut-Gumuscu, Suna; Rahman, Proton; Rantapää-Dahlqvist, Solbritt; Stuart, Philip E; Tsoi, Lam C; van Heel, David A; Worthington, Jane; Wouters, Mira M; Klareskog, Lars; Elder, James T; Gregersen, Peter K; Schumacher, Johannes; Rich, Stephen S; Wijmenga, Cisca; Sunyaev, Shamil R; de Bakker, Paul I W; Raychaudhuri, Soumya

2015-09-01

Human leukocyte antigen (HLA) genes confer substantial risk for autoimmune diseases on a log-additive scale. Here we speculated that differences in autoantigen-binding repertoires between a heterozygote's two expressed HLA variants might result in additional non-additive risk effects. We tested the non-additive disease contributions of classical HLA alleles in patients and matched controls for five common autoimmune diseases: rheumatoid arthritis (ncases = 5,337), type 1 diabetes (T1D; ncases = 5,567), psoriasis vulgaris (ncases = 3,089), idiopathic achalasia (ncases = 727) and celiac disease (ncases = 11,115). In four of the five diseases, we observed highly significant, non-additive dominance effects (rheumatoid arthritis, P = 2.5 × 10(-12); T1D, P = 2.4 × 10(-10); psoriasis, P = 5.9 × 10(-6); celiac disease, P = 1.2 × 10(-87)). In three of these diseases, the non-additive dominance effects were explained by interactions between specific classical HLA alleles (rheumatoid arthritis, P = 1.8 × 10(-3); T1D, P = 8.6 × 10(-27); celiac disease, P = 6.0 × 10(-100)). These interactions generally increased disease risk and explained moderate but significant fractions of phenotypic variance (rheumatoid arthritis, 1.4%; T1D, 4.0%; celiac disease, 4.1%) beyond a simple additive model.

Utility of labile plasma iron and transferrin saturation in addition to serum ferritin as iron overload markers in different underlying anemias before and after deferasirox treatment.

PubMed

Porter, John B; El-Alfy, Mohsen; Viprakasit, Vip; Giraudier, Stephane; Chan, Lee Lee; Lai, Yongrong; El-Ali, Ali; Han, Jackie; Cappellini, Maria D

2016-01-01

Plasma markers in addition to serum ferritin (SF) may be useful for the assessment of iron overload; however, predictive utility may differ depending on underlying, transfusion-dependent, anemias. Data were collected before and after 1 year of deferasirox treatment (end of study; EOS) from the large, 1-year EPIC (Evaluation of Patients' Iron Chelation with Exjade(®) ) study. Trends were evaluated between liver iron concentration (LIC), transferrin saturation (TfSat), predose labile plasma iron (LPI) and their relationship to SF categories in 1530 patients: thalassemia major (TM; n = 1114), myelodysplastic syndromes (MDS, n = 336), and sickle-cell disease (SCD, n = 80). Baseline and EOS SF values showed a clear and similar relationship to LIC for all disease groups. TfSat also showed a relationship to SF, most clearly in patients with SCD, where TfSat was lowest in the lowest relative SF category. Unlike SF or LIC, TfSat did not decrease at EOS in any disease group. Baseline LPI was raised in TM and MDS, but not in patients with SCD, decreasing at EOS in both patient groups. After 1 year of chelation therapy, there was a significant trend for greater LPI reduction in patients with TM achieving LIC <7 mg Fe/g dw (P = 0.0137). Despite limitations, SF showed the clearest relationship, of the plasma markers evaluated, to LIC before and after 1 year of deferasirox in patients with TM, MDS, and SCD. In patients with TM, changes in LPI with chelation show a significant relationship to EOS LIC and may provide an additional indicator of chelation response (clinicaltrials.gov identifier: NCT00171821). © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Additive manufacturing of reflective optics: evaluating finishing methods

NASA Astrophysics Data System (ADS)

Leuteritz, G.; Lachmayer, R.

2018-02-01

Individually shaped light distributions become more and more important in lighting technologies and thus the importance of additively manufactured reflectors increases significantly. The vast field of applications ranges from automotive lighting to medical imaging and bolsters the statement. However, the surfaces of additively manufactured reflectors suffer from insufficient optical properties even when manufactured using optimized process parameters for the Selective Laser Melting (SLM) process. Therefore post-process treatments of reflectors are necessary in order to further enhance their optical quality. This work concentrates on the effectiveness of post-process procedures for reflective optics. Based on already optimized aluminum reflectors, which are manufactured with a SLM machine, the parts are differently machined after the SLM process. Selected finishing methods like laser polishing, sputtering or sand blasting are applied and their effects quantified and compared. The post-process procedures are investigated on their impact on surface roughness and reflectance as well as geometrical precision. For each finishing method a demonstrator will be created and compared to a fully milled sample and among themselves. Ultimately, guidelines are developed in order to figure out the optimal treatment of additively manufactured reflectors regarding their optical and geometrical properties. Simulations of the light distributions will be validated with the developed demonstrators.

Additional effects of topical tranexamic acid in on-pump cardiac surgery.

PubMed

Taksaudom, Noppon; Siwachat, Sophon; Tantraworasin, Apichat

2017-01-01

Objective Postoperative bleeding after cardiac surgery is commonly associated with hyperfibrinolysis. This study was designed to evaluate the efficacy of topical tranexamic acid in addition to intravenous tranexamic acid in reducing bleeding in cardiac surgery cases. Methods From July 1, 2014 to September 30, 2015, 82 patients who underwent elective on-pump cardiac surgery were randomized into a tranexamic acid group and a placebo group. In the tranexamic acid group, 1 g of tranexamic acid dissolved in 100 mL of normal saline solution was poured into the pericardium during sternal closure; the placebo group had 100 mL of saline only. Two patients were excluded from the study due to obvious surgical bleeding. The primary endpoint was total blood loss 24 h after surgery. Repeated measures with mixed models was used to analyze bleeding over time. Results There was no significant difference in demographic and intraoperative data except for a significantly lower platelet count preoperatively in the tranexamic acid group ( p = 0.030). There was no significant difference in postoperative drainage volumes at 8, 16, and 24 h, postoperative bleeding over time (coefficient = 0.713, p = 0.709), or blood product transfusion between the groups. There were no serious complications. Conclusions Topical tranexamic acid is safe but it adds no additional efficacy to the intravenous application in reducing postoperative blood loss. Intravenous tranexamic acid administration alone is sufficient antifibrinolytic treatment to enhance the hemostatic effects during on-pump cardiac surgery.

Efficacy of feed additives against Campylobacter in live broilers during the entire rearing period.

PubMed

Guyard-Nicodème, M; Keita, A; Quesne, S; Amelot, M; Poezevara, T; Le Berre, B; Sánchez, J; Vesseur, P; Martín, Á; Medel, P; Chemaly, Marianne

2016-02-01

Poultry meat is the major source of human campylobacteriosis, the most frequently reported zoonosis in the EU. The prevalence of Campylobacter colonization in European broiler flocks is 71%. Despite considerable efforts, there is still no effective strategy available to prevent or reduce Campylobacter colonization in broilers. This study tested a wide variety of feed additives to reduce Campylobacter shedding in primary poultry production. Twelve additives containing organic or fatty acids, monoglycerides, plant extracts, prebiotics, or probiotics were tested. For each additive, broilers contaminated with Campylobacter jejuni were fed with an additive free diet (control group) or with a supplemented diet (treated group) and Campylobacter loads compared at three sampling times. No treatment was able to prevent broiler colonization by Campylobacter, and there was a high degree of variation in contamination among the birds. At 14 d of age, eight treatments significantly decreased the colonization level compared to the control group by a maximum of 2 log10 CFU/g. At 35 d of age, three of these treatments still had a significant effect with a maximum reduction of 1.88 log10 CFU/g for a probiotic. At 42 d of age, only one short-chain fatty acid was still significantly efficient with a mean reduction over 2 log10 CFU/g. In addition, a probiotic and a prebiotic-like compound significantly decreased the contamination by a maximum of 3 log10 CFU/g, only at the 42-d sampling period. This study gives promising results regarding the use of feed additives to reduce Campylobacter infection in flocks. Nevertheless, a global approach, combining intervention measures at the different steps of the broiler meat production chain could have a greater impact on the reduction of public health risk. © 2015 Poultry Science Association Inc.

Global genomic analysis of intraductal papillary mucinous neoplasms of the pancreas reveals significant molecular differences compared to ductal adenocarcinoma.

PubMed

Fritz, Stefan; Fernandez-del Castillo, Carlos; Mino-Kenudson, Mari; Crippa, Stefano; Deshpande, Vikram; Lauwers, Gregory Y; Warshaw, Andrew L; Thayer, Sarah P; Iafrate, A John

2009-03-01

To determine whether intraductal papillary mucinous neoplasms of the pancreas (IPMNs) have a different genetic background compared with ductal adenocarcinoma (PDAC). The biologic and clinical behavior of IPMNs and IPMN-associated adenocarcinomas is different from PDAC in having a less aggressive tumor growth and significantly improved survival. Up to date, the molecular mechanisms underlying the clinical behavior of IPMNs are incompletely understood. 128 cystic pancreatic lesions were prospectively identified during the course of 2 years. From the corresponding surgical specimens, 57 IPMNs were separated and subdivided by histologic criteria into those with low-grade dysplasia, moderate dysplasia, high-grade dysplasia, and invasive cancer. Twenty specimens were suitable for DNA isolation and subsequent performance of array CGH. While none of the IPMNs with low-grade dysplasia displayed detectable chromosomal aberrations, IPMNs with moderate and high-grade dysplasia showed frequent copy number alterations. Commonly lost regions were located on chromosome 5q, 6q, 10q, 11q, 13q, 18q, and 22q. The incidence of loss of chromosome 5q, 6q, and 11q was significantly higher in IPMNs with high-grade dysplasia or invasion compared with PDAC. Ten of 13 IPMNs with moderate dysplasia or malignancy had loss of part or all of chromosome 6q, with a minimal deleted region between linear positions 78.0 and 130.0. This study is the first to use array CGH to characterize IPMNs. Recurrent cytogenetic alterations were identified and were different than those described in PDAC. Array CGH may help distinguish between these 2 entities and give insight into the differences in their biology and prognosis.

TNF-α in CRPS and 'normal' trauma--significant differences between tissue and serum.

PubMed

Krämer, Heidrun H; Eberle, Tatiana; Uçeyler, Nurcan; Wagner, Ina; Klonschinsky, Thomas; Müller, Lars P; Sommer, Claudia; Birklein, Frank

2011-02-01

Posttraumatic TNF-alpha signaling may be one of the factors responsible for pain and hyperalgesia in complex regional pain syndromes (CRPS). In order to further specify the role of TNF-alpha we investigated tissue (skin) and serum concentrations in three different patient groups: patients with osteoarthritis and planned surgery, with acute traumatic upper limb bone fracture waiting for surgery, and with CRPS I. Thirty patients (10 in each group) were recruited. Mean CRPS duration was 36.1 ± 8.1 weeks (range 8- 90 weeks). Skin punch biopsies were taken at the beginning of the surgery in osteoarthritis and fracture patients and from the affected side in CRPS patients. Blood samples were taken before the respective procedures. Skin and serum TNF-alpha levels were quantified by ELISA. Compared to patients with osteoarthritis, skin TNF-alpha was significantly elevated in CRPS (p<0.001) and fracture patients (p<0.04). Skin TNF-alpha in CRPS patients was higher than in patients with acute bone fracture (p<0.02). In contrast, serum TNF-alpha values were the same in osteoarthritis and CRPS, and lower in fracture patients (p<0.03). Our results indicate a local but not systemic increase of TNF-alpha in CRPS patients. This increase persists for months after limb trauma and may offer the opportunity for targeted treatment. Copyright © 2010 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

Different extraction pretreatments significantly change the flavonoid contents of Scutellaria baicalensis

PubMed Central

Yu, Chunhao; Qu, Fengyun; Mao, Yanyong; Li, Dong; Zhen, Zhong; Nass, Rachael; Calway, Tyler; Wang, Yunwei; Yuan, Chun-Su; Wang, Chong-Zhi

2014-01-01

Context Scutellaria baicalensis is one of the most commonly used medicinal herbs, especially in traditional Chinese medicine. However, compared to many pharmacological studies of this botanical, much less attention has been paid to the quality control of the herb’s pretreatment prior to extract preparation, an issue that may affect therapeutic outcomes. Objective The current study was designed to evaluate whether different pretreatment conditions change the contents of its four major flavonoids in the herb, i.e., two glycosides (baicalin and wogonoside) and two aglycons (baicalein and wogonin). Materials and methods An HPLC assay was used to quantify the contents of these four flavonoids. The composition changes of four flavonoids by different pretreatment conditions including solvent, treatment time, temperature, pH value, and herb/solvent ratio were evaluated. Results After selection of the first order time-curve kinetics, our data showed that at 50°C, 1:5 herb/water (in w/v) ratio and pH 6.67 yielded an optimal conversion rate from flavonoid glycosides to their aglycons. In this optimized condition, the contents of baicalin and wogonoside were decreased to 1/70 and 1/13, while baicalein and wogonin were increased 3.5 and 3.1 folds, respectively, compared to untreated herb. Discussion and conclusion The markedly variable conversion rates by different pretreatment conditions complicated the quality control of this herb, mainly due to the high amount of endogenous enzymes of S. baicalensis. Optimal pretreatment conditions obtained from this study could be used obtain the highest level of desired constituents to achieve better pharmacological effects. PMID:23738852

Different extraction pretreatments significantly change the flavonoid contents of Scutellaria baicalensis.

PubMed

Yu, Chunhao; Qu, Fengyun; Mao, Yanyong; Li, Dong; Zhen, Zhong; Nass, Rachael; Calway, Tyler; Wang, Yunwei; Yuan, Chun-Su; Wang, Chong-Zhi

2013-10-01

Scutellaria baicalensis Georgi (Labiatae) is one of the most commonly used medicinal herbs, especially in traditional Chinese medicine. However, compared to many pharmacological studies of this botanical, much less attention has been paid to the quality control of the herb's pretreatment prior to extract preparation, an issue that may affect therapeutic outcomes. The current study was designed to evaluate whether different pretreatment conditions change the contents of the four major flavonoids in the herb, i.e., two glycosides (baicalin and wogonoside) and two aglycones (baicalein and wogonin). A high-performance liquid chromatography assay was used to quantify the contents of these four flavonoids. The composition changes of four flavonoids by different pretreatment conditions, including solvent, treatment time, temperature, pH value and herb/solvent ratio were evaluated. After selection of the first order time-curve kinetics, our data showed that at 50 °C, 1:5 herb/water (in w/v) ratio and pH 6.67 yielded an optimal conversion rate from flavonoid glycosides to their aglycones. In this optimized condition, the contents of baicalin and wogonoside were decreased to 1/70 and 1/13, while baicalein and wogonin were increased 3.5- and 3.1-fold, respectively, compared to untreated herb. The markedly variable conversion rates by different pretreatment conditions complicated the quality control of this herb, mainly due to the high amount of endogenous enzymes of S. baicalensis. Optimal pretreatment conditions observed in this study could be used obtain the highest level of desired constituents to achieve better pharmacological effects.

Assessing non-additive effects in GBLUP model.

PubMed

Vieira, I C; Dos Santos, J P R; Pires, L P M; Lima, B M; Gonçalves, F M A; Balestre, M

2017-05-10

Understanding non-additive effects in the expression of quantitative traits is very important in genotype selection, especially in species where the commercial products are clones or hybrids. The use of molecular markers has allowed the study of non-additive genetic effects on a genomic level, in addition to a better understanding of its importance in quantitative traits. Thus, the purpose of this study was to evaluate the behavior of the GBLUP model in different genetic models and relationship matrices and their influence on the estimates of genetic parameters. We used real data of the circumference at breast height in Eucalyptus spp and simulated data from a population of F 2 . Three commonly reported kinship structures in the literature were adopted. The simulation results showed that the inclusion of epistatic kinship improved prediction estimates of genomic breeding values. However, the non-additive effects were not accurately recovered. The Fisher information matrix for real dataset showed high collinearity in estimates of additive, dominant, and epistatic variance, causing no gain in the prediction of the unobserved data and convergence problems. Estimates presented differences of genetic parameters and correlations considering the different kinship structures. Our results show that the inclusion of non-additive effects can improve the predictive ability or even the prediction of additive effects. However, the high distortions observed in the variance estimates when the Hardy-Weinberg equilibrium assumption is violated due to the presence of selection or inbreeding can converge at zero gains in models that consider epistasis in genomic kinship.

"Compacted" procedures for adults' simple addition: A review and critique of the evidence.

PubMed

Chen, Yalin; Campbell, Jamie I D

2018-04-01

We review recent empirical findings and arguments proffered as evidence that educated adults solve elementary addition problems (3 + 2, 4 + 1) using so-called compacted procedures (e.g., unconscious, automatic counting); a conclusion that could have significant pedagogical implications. We begin with the large-sample experiment reported by Uittenhove, Thevenot and Barrouillet (2016, Cognition, 146, 289-303), which tested 90 adults on the 81 single-digit addition problems from 1 + 1 to 9 + 9. They identified the 12 very-small addition problems with different operands both ≤ 4 (e.g., 4 + 3) as a distinct subgroup of problems solved by unconscious, automatic counting: These items yielded a near-perfectly linear increase in answer response time (RT) yoked to the sum of the operands. Using the data reported in the article, however, we show that there are clear violations of the sum-counting model's predictions among the very-small addition problems, and that there is no real RT boundary associated with addends ≤4. Furthermore, we show that a well-known associative retrieval model of addition facts-the network interference theory (Campbell, 1995)-predicts the results observed for these problems with high precision. We also review the other types of evidence adduced for the compacted procedure theory of simple addition and conclude that these findings are unconvincing in their own right and only distantly consistent with automatic counting. We conclude that the cumulative evidence for fast compacted procedures for adults' simple addition does not justify revision of the long-standing assumption that direct memory retrieval is ultimately the most efficient process of simple addition for nonzero problems, let alone sufficient to recommend significant changes to basic addition pedagogy.

The significance of virulence factors in Helicobacter pylori.

PubMed

Shiota, Seiji; Suzuki, Rumiko; Yamaoka, Yoshio

2013-07-01

Helicobacter pylori (H. pylori) infection is linked to various gastroduodenal diseases; however, only a small fraction of these patients develop associated diseases. Despite the high prevalence of H. pylori infection in Africa and South Asia, the incidence of gastric cancer in these areas is much lower than those in other countries. The incidence of gastric cancer tends to decrease from north to south in East Asia. Such geographical differences in the pathology can be explained, at least in part, by the presence of different types of H. pylori virulence factors in addition to host and environmental factors. Virulence factors of H. pylori, such as CagA, VacA, DupA, IceA, OipA and BabA, have been demonstrated to be the predictors of severe clinical outcomes. Interestingly, a meta-analysis showed that CagA seropositivity was associated with gastric cancer compared with gastritis, even in East Asian countries where almost the strains possess cagA. Another meta-analysis also confirmed the significance of vacA, dupA and iceA. However, it is possible that additional important pathogenic genes may exist because H. pylori consists of approximately 1600 genes. Despite the advances in our understanding of the development of H. pylori infection-related diseases, further work is required to clarify the roles of H. pylori virulence factors. © 2013 The Authors. Journal of Digestive Diseases © 2013 Wiley Publishing Asia Pty Ltd and Chinese Medical Association Shanghai Branch, Chinese Society of Gastroenterology, Renji Hospital Affiliated to Shanghai Jiaotong University School of Medicine.

Printability of alloys for additive manufacturing

DOE PAGES

Mukherjee, T.; Zuback, J. S.; De, A.; ...

2016-01-22

Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is usedmore » to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. Here, the findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.« less

Printability of alloys for additive manufacturing

PubMed Central

Mukherjee, T.; Zuback, J. S.; De, A.; DebRoy, T.

2016-01-01

Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts. PMID:26796864

Towards understanding the effects of additives on the vermicomposting of sewage sludge.

PubMed

Xing, Meiyan; Lv, Baoyi; Zhao, Chunhui; Yang, Jian

2015-03-01

This work evaluated the effects of additives on the chemical properties of the final products (vermicompost) from vermicomposting of sewage sludge and the adaptable characteristics of Eisenia fetida during the process. An experimental design with different ratios of sewage sludge and the additives (cattle dung or pig manure) was conducted. The results showed that the vermicomposting reduced total organic carbon and the quotient of total organic carbon to total nitrogen (C/N ratio) of the initial mixtures and enhanced the stability and agronomical value of the final products. Notably, principal component analysis indicated that the additives had significant effects on the characteristics of the vermicomposts. Moreover, the vermibeds containing cattle dung displayed a better earthworm growth and reproduction than those with pig manure. Additionally, redundancy analysis demonstrated that electrical conductivity (EC), pH, and C/N ratio played crucial roles on earthworm growth and reproduction. In all, the additives with high C/N ratio, pH buffering capacity, and low EC are recommended to be used for vermicomposting of sewage sludge.

A Study to Determine if Addition of Palatal Petechiae to Centor Criteria Adds More Significance to Clinical Diagnosis of Acute Strep Pharyngitis in Children.

PubMed

Nibhanipudi, Kumara V

2016-01-01

Objective. A study to determine if addition of palatal petechiae to Centor criteria adds more value for clinical diagnosis of acute strep pharyngitis in children. Hypothesis. In children, Centor Criteria does not cover all the symptoms and signs of acute strep pharyngitis. We hypothesize that addition of palatal petechiae to Centor Criteria will increase the possibility of clinical diagnosis of group A streptococcal pharyngitis in children. Methods. One hundred patients with a complaint of sore throat were enrolled in the study. All the patients were examined clinically using the Centor Criteria. They were also examined for other signs and symptoms like petechial lesions over the palate, abdominal pain, and skin rash. All the patients were given rapid strep tests, and throat cultures were sent. No antibiotics were given until culture results were obtained. Results. The sample size was 100 patients. All 100 had fever, sore throat, and erythema of tonsils. Twenty of the 100 patients had tonsillar exudates, 85/100 had tender anterior cervical lymph nodes, and 86/100 had no cough. In total, 9 out of the 100 patients had positive throat cultures. We observed that petechiae over the palate, a very significant sign, is not included in the Centor Criteria. Palatal petechiae were present in 8 out of the 100 patients. Six out of these 8 with palatal petechiae had positive throat culture for strep (75%). Only 7 out of 20 with exudates had positive strep culture. Sixteen out of the 100 patients had rapid strep test positive. Those 84/100 who had negative rapid strep also had negative throat culture. Statistics. We used Fisher's exact test, comparing throat culture positive and negative versus presence of exudates and palatal hemorrhages with positive and negative throat cultures and the resultant P value <.0001. Conclusion. Our study concludes that addition of petechiae over the palate to Centor Criteria will increase the possibility of diagnosing acute group A streptococcal

The functional architectures of addition and subtraction: Network discovery using fMRI and DCM.

PubMed

Yang, Yang; Zhong, Ning; Friston, Karl; Imamura, Kazuyuki; Lu, Shengfu; Li, Mi; Zhou, Haiyan; Wang, Haiyuan; Li, Kuncheng; Hu, Bin

2017-06-01

The neuronal mechanisms underlying arithmetic calculations are not well understood but the differences between mental addition and subtraction could be particularly revealing. Using fMRI and dynamic causal modeling (DCM), this study aimed to identify the distinct neuronal architectures engaged by the cognitive processes of simple addition and subtraction. Our results revealed significantly greater activation during subtraction in regions along the dorsal pathway, including the left inferior frontal gyrus (IFG), middle portion of dorsolateral prefrontal cortex (mDLPFC), and supplementary motor area (SMA), compared with addition. Subsequent analysis of the underlying changes in connectivity - with DCM - revealed a common circuit processing basic (numeric) attributes and the retrieval of arithmetic facts. However, DCM showed that addition was more likely to engage (numeric) retrieval-based circuits in the left hemisphere, while subtraction tended to draw on (magnitude) processing in bilateral parietal cortex, especially the right intraparietal sulcus (IPS). Our findings endorse previous hypotheses about the differences in strategic implementation, dominant hemisphere, and the neuronal circuits underlying addition and subtraction. Moreover, for simple arithmetic, our connectivity results suggest that subtraction calls on more complex processing than addition: auxiliary phonological, visual, and motor processes, for representing numbers, were engaged by subtraction, relative to addition. Hum Brain Mapp 38:3210-3225, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Additives

NASA Technical Reports Server (NTRS)

Smalheer, C. V.

1973-01-01

The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

Metabolic Differences between Dogs of Different Body Sizes

PubMed Central

Lacroix, Sebastien; Kennedy, Adam D.; Beloshapka, Alison; Kaput, Jim

2017-01-01

Introduction The domesticated dog, Canis lupus familiaris, has been selectively bred to produce extreme diversity in phenotype and genotype. Dogs have an immense diversity in weight and height. Specific differences in metabolism have not been characterized in small dogs as compared to larger dogs. Objectives This study aims to identify metabolic, clinical, and microbiota differences between small and larger dogs. Methods Gas chromatography/mass spectrometry, liquid chromatography/tandem mass spectrometry, clinical chemistry analysis, dual-energy X-ray absorptiometry, and 16S pyrosequencing were used to characterize blood metabolic, clinical, and fecal microbiome systems, respectively. Eighty-three canines from seven different breeds, fed the same kibble diet for 5 weeks, were used in the study. Results 449 metabolites, 16 clinical parameters, and 6 bacteria (at the genus level) were significantly different between small and larger dogs. Hierarchical clustering of the metabolites yielded 8 modules associated with small dog size. Conclusion Small dogs had a lower antioxidant status and differences in circulating amino acids. Some of the amino acid differences could be attributed to differences in microflora. Additionally, analysis of small dog metabolites and clinical parameters reflected a network which strongly associates with kidney function. PMID:29225968

Additive postprandial blood glucose-attenuating and satiety-enhancing effect of cinnamon and acetic acid.

PubMed

Mettler, Samuel; Schwarz, Isaline; Colombani, Paolo C

2009-10-01

Cinnamon and vinegar or acetic acid were reported to reduce the postprandial blood glucose response. We hypothesized that the combination of these substances might result in an additive effect. Therefore, we determined the 2-hour postprandial blood glucose and satiety response to a milk rice meal supplemented with either cinnamon or acetic acid on their own or in combination. Subjects (n = 27) consumed the meal on 4 occasions as either pure (control trial), with 4 g cinnamon, 28 mmol acetic acid, or the combination of cinnamon + acetic acid. Blood glucose and satiety were assessed before eating and 15, 30, 45, 60, 90, and 120 minutes postprandially. At 15 minutes, the combination of cinnamon + acetic acid resulted in a significantly reduced blood glucose concentration compared with the control meal (P = .021). The incremental area under the blood glucose response curve over 120 minutes did, however, not differ between the trials (P = .539). The satiety score of the cinnamon + acetic acid trial was significantly higher than that in the control trial at 15 (P = .024) and 30 minutes (P = .024), but the incremental area under the curve of the satiety response did not differ (P = .116) between the trials. In conclusion, the significant effect of the combination of cinnamon and acetic acid on blood glucose and satiety immediately after meal intake indicated an additive effect of the 2 substances. Whether larger doses of cinnamon and acetic acid may result in a more substantial additive effect on blood glucose or satiety remains to be investigated.

A study of the additional costs of dispensing workers' compensation prescriptions.

PubMed

Schafermeyer, Kenneth W

2007-03-01

Although there is a significant amount of additional work involved in dispensing workers' compensation prescriptions, these costs have not been quantified. A study of the additional costs to dispense a workers' compensation prescription is needed to measure actual costs and to help determine the reasonableness of reimbursement for prescriptions dispensed under workers' compensation programs. The purpose of this study was to determine the minimum additional time and costs required to dispense workers' compensation prescriptions in Texas. A convenience sample of 30 store-level pharmacy staff members involved in submitting and processing prescription claims for the Texas Mutual workers' compensation program were interviewed by telephone. Data collected to determine the additional costs of dispensing a workers' compensation prescription included (1) the amount of additional time and personnel costs required to dispense and process an average workers' compensation prescription claim, (2) the difference in time required for a new versus a refilled prescription, (3) overhead costs for processing workers' compensation prescription claims by experienced experts at a central processing facility, (4) carrying costs for workers' compensation accounts receivable, and (5) bad debts due to uncollectible workers' compensation claims. The median of the sample pharmacies' additional costs for dispensing a workers' compensation prescription was estimated to be at least $9.86 greater than for a cash prescription. This study shows that the estimated costs for workers' compensation prescriptions were significantly higher than for cash prescriptions. These costs are probably much more than most employers, workers' compensation payers, and pharmacy managers would expect. It is recommended that pharmacy managers should estimate their own costs and compare these costs to actual reimbursement when considering the reasonableness of workers' compensation prescriptions and whether to accept

Censored data treatment using additional information in intelligent medical systems

NASA Astrophysics Data System (ADS)

Zenkova, Z. N.

2015-11-01

Statistical procedures are a very important and significant part of modern intelligent medical systems. They are used for proceeding, mining and analysis of different types of the data about patients and their diseases; help to make various decisions, regarding the diagnosis, treatment, medication or surgery, etc. In many cases the data can be censored or incomplete. It is a well-known fact that censorship considerably reduces the efficiency of statistical procedures. In this paper the author makes a brief review of the approaches which allow improvement of the procedures using additional information, and describes a modified estimation of an unknown cumulative distribution function involving additional information about a quantile which is known exactly. The additional information is used by applying a projection of a classical estimator to a set of estimators with certain properties. The Kaplan-Meier estimator is considered as an estimator of the unknown cumulative distribution function, the properties of the modified estimator are investigated for a case of a single right censorship by means of simulations.

Oil-soluble hairy nanoparticles as lubricant additives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Bin

Oil-soluble polymer brush-grafted nanoparticles (hairy NPs) were synthesized by surface-initiated atom transfer radical polymerization of lauryl methacrylate from initiator-functionalized silica nanoparticles and used as an additive for polyalphaolefin (PAO) for friction and wear reduction. Addition of 1 wt% hairy nanoparticles into PAO led to significant friction and wear reduction compared with PAO base oil.

Chemical stabilization of polymers: Implications for dermal exposure to additives.

PubMed

Bartsch, N; Girard, M; Schneider, L; Weijgert, V Van De; Wilde, A; Kappenstein, O; Vieth, B; Hutzler, C; Luch, A

2018-04-16

Technical benefits of additives in polymers stand in marked contrast to their associated health risks. Here, a multi-analyte method based on gas chromatography coupled to tandem mass spectrometry (GC-MS/MS) was developed to quantify polymer additives in complex matrices such as low-density polyethylene (LDPE) and isolated human skin layers after dermal exposure ex vivo. That way both technical aspects and dermal exposure were investigated. The effects of polymer additivation on the material were studied using the example of LDPE. To this end, a tailor-made polymer was applied in aging studies that had been furnished with two different mixtures of phenol- and diarylamine-based antioxidants, plasticizers and processing aids. Upon accelerated thermo-oxidative aging of the material, the formation of LDPE degradation products was monitored with attenuated total reflectance-Fourier transformed infrared (ATR-FTIR) spectroscopy. Compared to pure LDPE, a protective effect of added antioxidants could be observed on the integrity of the polymer. Further, thermo-oxidative degradation of the additives and its kinetics were investigated using LDPE or squalane as matrix. The half-lives of additives in both matrices revealed significant differences between the tested additives as well as between LDPE and squalane. For instance, 2-tert-butyl-6-[(3-tert-butyl-2-hydroxy-5-methylphenyl)methyl]-4-methylphenol (Antioxidant 2246) showed a half-life 12 times lower when incorporated in LDPE as compared to squalane. As a model for dermal exposure of consumers, human skin was brought into contact with the tailor-made LDPE containing additives ex vivo in static Franz diffusion cells. The skin was then analyzed for additives and decomposition products. This study proved 10 polymer additives of diverse pysicochemical properties and functionalities to migrate out of the polymer and eventually overcome the intact human skin barrier during contact. Moreover, their individual distribution within

The significance of visitors' pressure for soil status in an urban park in Tel-Aviv

NASA Astrophysics Data System (ADS)

Zhevelev, Helena; Sarah, Pariente; Oz, Atar

2010-05-01

A park is one of the most important elements of sustainable development and optimization of the urban environment. The equilibrium within the complex of natural and anthropogenic factors defines the status of a park's ecosystem. The seasonal dynamics and spatial variations of soil properties in areas under differing levels of visitors' pressure were studied in a park in Tel-Aviv. Soil was sampled twice a year, in wet (March) and dry (July) seasons, from three types of areas, subjected to differing levels of visitors' pressure: high, low and none (control). In each type of area samples were taken from two depths (0-2 cm and 5-10 cm), at 14-39 points. In total, 268 soil samples were taken. Before the soil sampling, penetration depth was determined at each point. In addition, the numbers of barbecue fires in each of the three areas were counted. Gravimetric soil moisture, organic matter, pH, electrical conductivity, and soluble ions were measured in 1:1 water extraction. Penetration depth and electrical conductivity, and organic matter, sodium, potassium and chlorite contents differed under differing levels of visitors' pressure, whereas soil moisture, pH and calcium content exhibited only minor differences. Soil moisture, electrical conductivity, and magnesium and chlorite contents exhibited strong seasonal changes, whereas the organic matter, potassium and pH levels were unaffected by seasonal dynamics. Calcium, organic matter, magnesium and chlorite contents, and electrical conductivity were significantly affected by the depth of soil sampling, whereas pH was not so affected. The seasonal changes in soil properties in the area subjected to high visitors' pressure were higher than in the one under low visitors' pressure. In most cases, visitors' pressure led to increases in variance and coefficient of variation. Different soil properties were differently affected by visitors' pressure, seasonal dynamics and soil depth. The surface of the soil was more sensitive to

Widespread non-additive and interaction effects within HLA loci modulate the risk of autoimmune diseases

PubMed Central

Lenz, Tobias L.; Deutsch, Aaron J.; Han, Buhm; Hu, Xinli; Okada, Yukinori; Eyre, Stephen; Knapp, Michael; Zhernakova, Alexandra; Huizinga, Tom W.J.; Abecasis, Goncalo; Becker, Jessica; Boeckxstaens, Guy E.; Chen, Wei-Min; Franke, Andre; Gladman, Dafna D.; Gockel, Ines; Gutierrez-Achury, Javier; Martin, Javier; Nair, Rajan P.; Nöthen, Markus M.; Onengut-Gumuscu, Suna; Rahman, Proton; Rantapää-Dahlqvist, Solbritt; Stuart, Philip E.; Tsoi, Lam C.; Van Heel, David A.; Worthington, Jane; Wouters, Mira M.; Klareskog, Lars; Elder, James T.; Gregersen, Peter K.; Schumacher, Johannes; Rich, Stephen S.; Wijmenga, Cisca; Sunyaev, Shamil R.; de Bakker, Paul I.W.; Raychaudhuri, Soumya

2015-01-01

Human leukocyte antigen (HLA) genes confer strong risk for autoimmune diseases on a log-additive scale. Here we speculated that differences in autoantigen binding repertoires between a heterozygote’s two expressed HLA variants may result in additional non-additive risk effects. We tested non-additive disease contributions of classical HLA alleles in patients and matched controls for five common autoimmune diseases: rheumatoid arthritis (RA, Ncases=5,337), type 1 diabetes (T1D, Ncases=5,567), psoriasis vulgaris (Ncases=3,089), idiopathic achalasia (Ncases=727), and celiac disease (Ncases=11,115). In four out of five diseases, we observed highly significant non-additive dominance effects (RA: P=2.5×1012; T1D: P=2.4×10−10; psoriasis: P=5.9×10−6; celiac disease: P=1.2×10−87). In three of these diseases, the dominance effects were explained by interactions between specific classical HLA alleles (RA: P=1.8×10−3; T1D: P=8.6×1027; celiac disease: P=6.0×10−100). These interactions generally increased disease risk and explained moderate but significant fractions of phenotypic variance (RA: 1.4%, T1D: 4.0%, and celiac disease: 4.1%, beyond a simple additive model). PMID:26258845

Contents of chemical elements in stomach during prenatal development: different age-dependent dynamical changes and their significance

PubMed Central

Hou, Shao-Fan; Li, Hai-Rong; Wang, Li-Zhen; Li, De-Zhu; Yang, Lin-Sheng; Li, Chong-Zheng

2003-01-01

AIM: To observe dynamic of different chemical elements in stomach tissue during fetal development. METHODS: To determine contents of the 21 chemical elements in each stomach samples from fetus aging four to ten months. The content values were compared to those from adult tissue samples, and the values for each month group were also analyzed for dynamic changes. RESULTS: Three representations were found regarding the relationship between contents of the elements and ages of the fetus, including the positive correlative (K), reversely correlative (Na, Ca, P, Al, Cu, Zn, Fe, Mn, Cr, Sr, Li, Cd, Ba, Se) and irrelevant groups (Mg, Co, Ni, V, Pb, Ti). CONCLUSION: The chemical elements’ contents in stomach tissues were found to change dynamically with the stomach weights. The age-dependent representations for different chemical elements during the prenatal development may be of some significance for assessing development of fetal stomach and some chemical elements. The data may be helpful for the nutritional balance of fetus and mothers during prenatal development and even the perinatal stages. PMID:12717857

Behaviors of Polymer Additives Under EHL and Influences of Interactions Between Additives on Friction Modification

NASA Technical Reports Server (NTRS)

Sakurai, T.

1984-01-01

Polymer additives have become requisite for the formulation of multigrade engine oils. The behavior of polymethacrylate (PMA)-thickened oils as lubricants in concentrated contacts under nominal rolling and pure sliding conditions was investigated by conventional optical interferometry. The PMA thickened oils behaved differently from the base oil in the formation of elastohydrodynamic (EHL) films. The higher the elastohydrodynamic molecular weight of the PMA contained in the lubricant, the thinner was the oil film under EHL conditions. The film thickness of shear-degraded PMA-thickened oils was also investigated. The behavior of graphite particles dispersed in both the base oil and the PMA-thickened oil was studied under pure sliding by taking photomicrographs. Many kinds of additives are contained in lubricating oil and the interactions between additives are considered. The interactions of zinc-organodithiophosphates (ZDP) with other additives is discussed.

Cyclization Cascades Initiated by 1,6-Conjugate Addition

PubMed Central

Brooks, Joshua L.; Frontier, Alison J.

2012-01-01

Dienyl diketones containing tethered acetates selectively undergo two different 1,6-conjugate addition-initiated cyclization cascades. One is a 1,6-conjugate addition/cyclization sequence with incorporation of the nucleophile, and the other is catalyzed by DABCO and is thought to proceed via a cyclic acetoxonium intermediate. The reaction behavior of substrates lacking the tethered acetate was also studied. The scope of both types of cyclization cascades, the role of the amine additive, and the factors controlling reactivity and selectivity in the two different reaction pathways is discussed. PMID:23004564

Effects of litter addition on ectomycorrhizal associates of a lodgepole pine (Pinus contorta) stand in Yellowstone National Park

NASA Technical Reports Server (NTRS)

Cullings, Kenneth W.; New, Michael H.; Makhija, Shilpa; Parker, V. Thomas

2003-01-01

Increasing soil nutrients through litter manipulation, pollution, or fertilization can adversely affect ectomycorrhizal (EM) communities by inhibiting fungal growth. In this study, we used molecular genetic methods to determine the effects of litter addition on the EM community of a Pinus contorta stand in Yellowstone National Park that regenerated after a stand-replacing fire. Two controls were used; in unmodified control plots nothing was added to the soil, and in perlite plots perlite, a chemically neutral substance, was added to maintain soil moisture and temperature at levels similar to those under litter. We found that (i) species richness did not change significantly following perlite addition (2.6 +/- 0.3 species/core in control plots, compared with 2.3 +/- 0.3 species/core in perlite plots) but decreased significantly (P < 0.05) following litter addition (1.8 +/- 0.3 species/core); (ii) EM infection was not affected by the addition of perlite but increased significantly (P < 0.001) in response to litter addition, and the increase occurred only in the upper soil layer, directly adjacent to the added litter; and (iii) Suillus granulatus, Wilcoxina mikolae, and agaricoid DD were the dominant organisms in controls, but the levels of W. mikolae and agaricoid DD decreased significantly in response to both perlite and litter addition. The relative levels of S. granulatus and a fourth fungus, Cortinariaceae species 2, increased significantly (P < 0.01 and P < 0.05, respectively) following litter addition. Thus, litter addition resulted in some negative effects that may be attributable to moisture-temperature relationships rather than to the increased nutrients associated with litter. Some species respond positively to litter addition, indicating that there are differences in their physiologies. Hence, changes in the EM community induced by litter accumulation also may affect ecosystem function.

Reversal of Apixaban Induced Alterations in Hemostasis by Different Coagulation Factor Concentrates: Significance of Studies In Vitro with Circulating Human Blood

PubMed Central

Arellano-Rodrigo, Eduardo; Roquer, Jaume; Reverter, Joan Carles; Sanz, Victoria Veronica; Molina, Patricia; Lopez-Vilchez, Irene; Diaz-Ricart, Maribel; Galan, Ana Maria

2013-01-01

Apixaban is a new oral anticoagulant with a specific inhibitory action on FXa. No information is available on the reversal of the antihemostatic action of apixaban in experimental or clinical settings. We have evaluated the effectiveness of different factor concentrates at reversing modifications of hemostatic mechanisms induced by moderately elevated concentrations of apixaban (200 ng/ml) added in vitro to blood from healthy donors (n = 10). Effects on thrombin generation (TG) and thromboelastometry (TEM) parameters were assessed. Modifications in platelet adhesive, aggregating and procoagulant activities were evaluated in studies with blood circulating through damaged vascular surfaces, at a shear rate of 600 s−1. The potential of prothrombin complex concentrates (PCCs; 50 IU/kg), activated prothrombin complex concentrates (aPCCs; 75 IU/kg), or activated recombinant factor VII (rFVIIa; 270 μg/kg), at reversing the antihemostatic actions of apixaban, were investigated. Apixaban interfered with TG kinetics. Delayed lag phase, prolonged time to peak and reduced peak values, were improved by the different concentrates, though modifications in TG patterns were diversely affected depending on the activating reagents. Apixaban significantly prolonged clotting times (CTs) in TEM studies. Prolongations in CTs were corrected by the different concentrates with variable efficacies (rFVIIa≥aPCC>PCC). Apixaban significantly reduced fibrin and platelet interactions with damaged vascular surfaces in perfusion studies (p<0.05 and p<0.01, respectively). Impairments in fibrin formation were normalized by the different concentrates. Only rFVIIa significantly restored levels of platelet deposition. Alterations in hemostasis induced by apixaban were variably compensated by the different factor concentrates investigated. However, effects of these concentrates were not homogeneous in all the tests, with PCCs showing more efficacy in TG, and rFVIIa being more effective on TEM

[Effects of superphosphate addition on NH3 and greenhouse gas emissions during vegetable waste composting].

PubMed

Yang, Yan; Sun, Qin-ping; Li, Ni; Liu, Chun-sheng; Li, Ji-jin; Liu, Ben-sheng; Zou, Guo-yuan

2015-01-01

To study the effects of superphosphate (SP) on the NH, and greenhouse gas emissions, vegetable waste composting was performed for 27 days using 6 different treatments. In addition to the controls, five vegetable waste mixtures (0.77 m3 each) were treated with different amounts of the SP additive, namely, 5%, 10%, 15%, 20% and 25%. The ammonia volatilization loss and greenhouse gas emissions were measured during composting. Results indicated that the SP additive significantly decreased the ammonia volatilization and greenhouse gas emissions during vegetable waste composting. The additive reduced the total NH3 emission by 4.0% to 16.7%. The total greenhouse gas emissions (CO2-eq) of all treatments with SP additives were decreased by 10.2% to 20.8%, as compared with the controls. The NH3 emission during vegetable waste composting had the highest contribution to the greenhouse effect caused by the four different gases. The amount of NH3 (CO2-eq) from each treatment ranged from 59.90 kg . t-1 to 81.58 kg . t-1; NH3(CO2-eq) accounted for 69% to 77% of the total emissions from the four gases. Therefore, SP is a cost-effective phosphorus-based fertilizer that can be used as an additive during vegetable waste composting to reduce the NH3 and greenhouse gas emissions as well as to improve the value of compost as a fertilizer.

Different Effect of the Additional Electron-Withdrawing Cyano Group in Different Conjugation Bridge: The Adjusted Molecular Energy Levels and Largely Improved Photovoltaic Performance.

PubMed

Li, Huiyang; Fang, Manman; Hou, Yingqin; Tang, Runli; Yang, Yizhou; Zhong, Cheng; Li, Qianqian; Li, Zhen

2016-05-18

Four organic sensitizers (LI-68-LI-71) bearing various conjugated bridges were designed and synthesized, in which the only difference between LI-68 and LI-69 (or LI-70 and LI-71) was the absence/presence of the CN group as the auxiliary electron acceptor. Interestingly, compared to the reference dye of LI-68, LI-69 bearing the additional CN group exhibited the bad performance with the decreased Jsc and Voc values. However, once one thiophene moiety near the anchor group was replaced by pyrrole with the electron-rich property, the resultant LI-71 exhibited a photoelectric conversion efficiency increase by about 3 folds from 2.75% (LI-69) to 7.95% (LI-71), displaying the synergistic effect of the two moieties (CN and pyrrole). Computational analysis disclosed that pyrrole as the auxiliary electron donor (D') in the conjugated bridge can compensate for the lower negative charge in the electron acceptor, which was caused by the CN group as the electron trap, leading to the more efficient electron injection and better photovoltaic performance.

Different sleep onset criteria at the multiple sleep latency test (MSLT): an additional marker to differentiate central nervous system (CNS) hypersomnias.

PubMed

Pizza, Fabio; Vandi, Stefano; Detto, Stefania; Poli, Francesca; Franceschini, Christian; Montagna, Pasquale; Plazzi, Giuseppe

2011-03-01

Excessive daytime sleepiness (EDS) has different correlates in non-rapid eye movement (NREM) [idiopathic hypersomnia (IH) without long sleep time] and REM sleep [narcolepsy without cataplexy (NwoC) and narcolepsy with cataplexy (NC)]-related hypersomnias of central origin. We analysed sleep onset characteristics at the multiple sleep latency test (MSLT) applying simultaneously two sleep onset criteria in 44 NC, seven NwoC and 16 IH consecutive patients referred for subjective EDS complaint. Sleep latency (SL) at MSLT was assessed both as the time elapsed to the occurrence of a single epoch of sleep Stage 1 NREM (SL) and of unequivocal sleep [three sleep Stage 1 NREM epochs or any other sleep stage epoch, sustained SL (SusSL)]. Idiopathic hypersomnia patients showed significantly (P<0.0001) longer SusSL than SL (7.7±2.5 versus 5.6±1.3 min, respectively) compared to NwoC (5.8±2.5 versus 5.3±2.2 min) and NC patients (4.1±3 versus 3.9±3 min). A mean difference threshold between SusSL and SL ≥27 s reached a diagnostic value to discriminate IH versus NC and NwoC sufferers (sensitivity 88%; specificity 82%). Moreover, NC patients showed better subjective sleepiness perception than NwoC and IH cases in the comparison between naps with or without sleep occurrence. Simultaneous application of the two widely used sleep onset criteria differentiates IH further from NC and NwoC patients: IH fluctuate through a wake-Stage 1 NREM sleep state before the onset of sustained sleep, while NC and NwoC shift abruptly into a sustained sleep. The combination of SusSL and SL determination at MSLT should be tested as an additional objective differential criterion for EDS disorders. © 2010 European Sleep Research Society.

Cryopreservation of amniotic membrane with and without glycerol additive.

PubMed

Wagner, Malina; Walter, Peter; Salla, Sabine; Johnen, Sandra; Plange, Niklas; Rütten, Stephan; Goecke, Tamme W; Fuest, Matthias

2018-06-01

Amniotic membrane (AM) is an essential tool in ocular surface reconstruction. In this study, we analyzed the differential effects of glycerol and straight storage at - 80 °C for up to 6 months on the structural, biological, and mechanical properties of amniotic membrane (AM). Human placentae of 11 different subjects were analyzed. AMs were stored at - 80 °C, either with a 1:1 mixture of Dulbecco's modified Eagle medium and glycerol (glycerol) or without any medium or additives (straight). Histological image analysis, tensile strength, cell viability, and basic fibroblast growth factor (bFGF) secretion were evaluated at 0.5, 1, 3, and 6 months. Histologically, neither glycerol nor straight storage significantly altered the epithelial or stromal structure of the AM. However, the cell number of the stroma was significantly reduced during the freezing process, independently of the storage method (p = 0.05-0.001). Tensile strength and Young's modulus were not influenced by the storage method, but longer storage periods significantly increased the tensile strength of the AMs (p = 0.028). Cell viability was higher in glycerol rather than straight AM samples for up to 3 months of storage (p = 0.047-0.03). Secretion of bFGF at 3 months of storage was significantly higher in glycerol versus straight frozen AM samples (p = 0.04). Glycerol led to higher cell viability and higher bFGF secretion for up to 3 months of AM storage. However, no significant differences between the two methods were observed at 6 months of storage at - 80 °C.

Significant differences in struvite and cystine stone frequency seen among Chinese nephrolithiasis patients living in North America compared to those living in China

PubMed Central

Chi, Thomas; Usawachintachit, Manint; Filippou, Pauline; Bayne, David; Hu, Weiguo; Chang, Helena; Xia, Lei; Chen, Qi; Xue, Wei; He, Hui; Long, Qingzhi; Arsovska, Olga; Taylor, Eric; Paterson, Ryan; Sur, Roger L.; Chew, Ben; Stoller, Marshall L.

2016-01-01

Background Interracial disparities in nephrolithiasis prevalence have been reported, but the interplay between genetics and the environment for urinary stone disease risk factors is poorly understood. To examine how environment may alter genetic predisposition for stone formation, we established the International Chinese Consortium on Nephrolithiasis (ICCON) as a multi-institutional collaboration to examine patterns of nephrolithiasis presentation between Chinese patients living in different countries. Methods Chinese patients undergoing percutaneous nephrolithotomy (PCNL) at six participating institutions in China and North America over 4 years were reviewed retrospectively. Patient demographics and clinical data were compared between Chinese patients living in China and North America. Results A total of 806 patients were included, encompassing 721 Chinese patients living in China and 85 living in North America. Nephrolithiasis patients living in China were more likely to be male (67% vs. 56%, P=0.02), present at a younger age (48.6±15.0 vs. 55.0±13.0 years, P<0.01), and have a lower BMI (24.6±4.0 vs. 25.9±5.7, P=0.04) but were less likely to form struvite stones (5.5% vs. 14.1%, P<0.01). No cystine stone patients were seen in North American Chinese patients, whereas 1.8% of nephrolithiasis patients living in China presented with cystine stones. Similar rates of calcium-based and uric acid calculi as well as urinary pH were seen among both groups. Conclusions Significant differences exist between Chinese nephrolithiasis patients living in China compared to those living in North America, highlighting the importance of environmental factors in addition to genetics in modulating risk for urinary stone disease. PMID:27298786

Asymptomatic bacteriuria. Clinical significance and management.

PubMed

Raz, Raul

2003-10-01

The clinical significance and management of asymptomatic bacteriuria (ASB) differs according to different groups of patients. ASB requires antibiotic treatment in pregnant women, children aged 5-6 years and prior to invasive genitourinary procedures. However, there is a consensus that ASB in the elderly, healthy school girls and young women, diabetic women and patients with indwelling catheters or intermittent catheterization has no clinical significance and antibiotic prescription is not indicated.

Early additional food and fluids for healthy breastfed full-term infants.

PubMed

Becker, Genevieve E; Remmington, Tracey

2014-11-25

Widespread recommendations from health organisations encourage exclusive breastfeeding for six months. However, the addition of other fluids or foods before six months is common in many countries and communities. This practice suggests perceived benefits of early supplementation or lack of awareness of the possible risks. To assess the benefits and harms of supplementation for full-term healthy breastfed infants and to examine the timing and type of supplementation. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (21 March 2014) and reference lists of all relevant retrieved papers. Randomised or quasi-randomised controlled trials in infants under six months of age comparing exclusive breastfeeding versus breastfeeding with any additional food or fluids. Two review authors independently selected the trials, extracted data and assessed risk of bias. We included eight trials (984 randomised infants/mothers). Six trials (n = 613 analysed) provided data on outcomes of interest to this review. The variation in outcome measures and time points made it difficult to pool results from trials. Data could only be combined in a meta-analysis for one secondary outcome (weight change). The trials that provided outcome data compared exclusively breastfed infants with breastfed infants who were allowed additional nutrients in the form of artificial milk, glucose, water or solid foods.In relation to the majority of the older trials, the description of study methods was inadequate to assess the risk of bias. The two more recent trials, were found to be at low risk of bias for selection and detection bias. The overall quality of the evidence for the main comparison was low.In one trial (170 infants) comparing exclusively breastfeeding infants with infants who were allowed additional glucose water, there was a significant difference favouring exclusive breastfeeding up to and including week 20 (risk ratio (RR) 1.45, 95% confidence interval (CI) 1.05 to 1

Supplier Selection Using Weighted Utility Additive Method

NASA Astrophysics Data System (ADS)

Karande, Prasad; Chakraborty, Shankar

2015-10-01

Supplier selection is a multi-criteria decision-making (MCDM) problem which mainly involves evaluating a number of available suppliers according to a set of common criteria for choosing the best one to meet the organizational needs. For any manufacturing or service organization, selecting the right upstream suppliers is a key success factor that will significantly reduce purchasing cost, increase downstream customer satisfaction and improve competitive ability. The past researchers have attempted to solve the supplier selection problem employing different MCDM techniques which involve active participation of the decision makers in the decision-making process. This paper deals with the application of weighted utility additive (WUTA) method for solving supplier selection problems. The WUTA method, an extension of utility additive approach, is based on ordinal regression and consists of building a piece-wise linear additive decision model from a preference structure using linear programming (LP). It adopts preference disaggregation principle and addresses the decision-making activities through operational models which need implicit preferences in the form of a preorder of reference alternatives or a subset of these alternatives present in the process. The preferential preorder provided by the decision maker is used as a restriction of a LP problem, which has its own objective function, minimization of the sum of the errors associated with the ranking of each alternative. Based on a given reference ranking of alternatives, one or more additive utility functions are derived. Using these utility functions, the weighted utilities for individual criterion values are combined into an overall weighted utility for a given alternative. It is observed that WUTA method, having a sound mathematical background, can provide accurate ranking to the candidate suppliers and choose the best one to fulfill the organizational requirements. Two real time examples are illustrated to prove

[Responses of plant community structure and species composition to warming and N addition in an alpine meadow, northern Tibetan Plateau, China].

PubMed

Zong, Ning; Chai, Xi; Shi, Pei Li; Jiang, Jing; Niu, Ben; Zhang, Xian Zhou; He, Yong Tao

2016-12-01

Global climate warming and increasing nitrogen (N) deposition, as controversial global environmental issues, may distinctly affect the functions and processes of terrestrial ecosystems. It has been reported that the Qinghai-Tibet Plateau has been experiencing significant warming in recent decades, especially in winter. Previous studies have mainly focused on the effects of warming all the year round; however, few studies have tested the effects of winter warming. To investigate the effects of winter warming and N addition on plant community structure and species composition of alpine meadow, long-term N addition and simulated warming experiment was conducted in alpine meadow from 2010 in Damxung, northern Tibet. The experiment consisted of three warming patterns: Year-round warming (YW), winter warming (WW) and control (NW), crossed respectively with five N gradients: 0, 10, 20, 40, 80 kg N·hm -2 ·a -1 . From 2012 to 2014, both warming and N addition significantly affected the total coverage of plant community. Specifically, YW significantly decreased the total coverage of plant community. Without N addition, WW remarkably reduced the vegetation coverage. However, with N addition, the total vegetation coverage gradually increased with the increase of N level. Warming and N addition had different effects on plants from different functional groups. Warming significantly reduced the plant coverage of grasses and sedges, while N addition significantly enhanced the plant coverage of grasses. Regression analyses showed that the total coverage of plant community was positively related to soil water content in vigorous growth stages, indicating that the decrease in soil water content resulted from warming during dry seasons might be the main reason for the decline of total community coverage. As soil moisture in semi-arid alpine meadow is mainly regulated by rainfalls, our results indicated that changes in spatial and temporal patterns of rainfalls under the future

Prevention of red cell storage lesion: a comparison of five different additive solutions.

PubMed

Lagerberg, Johan W; Korsten, Herbert; Van Der Meer, Pieter F; De Korte, Dirk

2017-09-01

In Europe, red cell concentrates (RCC) are usually stored in SAGM (saline-adenine-glucose-mannitol). During storage, in vitro red cell quality declines, including lowered energy status and increased cell lysis. Recently, several additive solutions (ASs), designed to diminish the decline in in vitro quality during storage, have been developed. These new solutions have mainly been developed to better maintain red blood cell (RBC) 2,3-biphosphoglycerate (2,3 BPG) levels and energy status during storage. High levels of 2,3 BPG allow for better oxygen release while high energy status is necessary for function and survival of RBC in vivo. In a paired study design, RBC ASs were compared for their ability to provide improved in vitro quality during hypothermic storage. For each experiment, 5 whole blood units held overnight were pooled and split. The whole blood units were processed according to the buffy coat method. RBCs were resuspended in either SAGM, PAGGSM, PAG3M, E-Sol 5 or AS-7 and leucoreduced by filtration. RCCs were stored for eight weeks at 2-6 °C and sampled weekly for analysis of in vitro quality parameters. Red cell concentrates stored in PAG3M, E-Sol 5 and AS-7 showed significantly higher lactate production and higher levels of intracellular adenosine triphosphate (ATP) and total adenylate. 2,3 BPG levels rapidly declined during storage in SAGM and PAGGSM. The decline in 2,3 BPG was inhibited during storage in E-Sol 5 and AS-7, while in PAG3M, 2,3 BPG level increased above the initial level till day 35 and remained detectable till day 56. Haemolysis was comparable for all ASs until day 35, upon prolonged storage, haemolysis in SAGM was higher than with the other ASs. As compared to SAGM, storage in PAGGSM, PAG3M, E-Sol 5 and AS-7 better maintained morphological properties. Storage of RBCs in the new generation ASs yield RBCs with more stable metabolite levels and improved overall quality during storage as compared with RBCs stored in SAGM.

Erratum to: Application of addition-cured silicone denture relining materials to adjust mouthguards.

PubMed

Fukasawa, Shintaro; Churei, Hiroshi; Chowdhury, Ruman Uddin; Shirako, Takahiro; Shahrin, Sharika; Shrestha, Abhishekhi; Wada, Takahiro; Uo, Motohiro; Takahashi, Hidekazu; Ueno, Toshiaki

2016-01-01

The purposes of this study were to examine the shock absorption capability of addition-cured silicone denture relining materials and the bonding strength of addition-cured silicone denture relining materials and a commercial mouthguard material to determine its applicability to mouthguard adjustment. Two addition-cured silicone denture relining materials were selected as test materials. The impact test was applied by a free-falling steel ball. On the other hand, bonding strength was determined by a delamination test. After prepared surface treatments using acrylic resin on MG sheet surface, 2 types of addition-cured silicone denture relining materials were glued to MG surface. The peak intensity, the time to peak intensity from the onset of the transmitted force and bonding strength were statistically analyzed using ANOVA and Tukey's honest significant difference post hoc test (p<0.05). These results suggest that the silicone denture relining materials could be clinically applicable as a mouthguard adjustment material.

Effect of hydrogen addition on soot formation in an ethylene/air premixed flame

NASA Astrophysics Data System (ADS)

De Iuliis, S.; Maffi, S.; Migliorini, F.; Cignoli, F.; Zizak, G.

2012-03-01

The effect of hydrogen addition to fuel in soot formation and growth mechanisms is investigated in a rich ethylene/air premixed flame. To this purpose, three-angle scattering and extinction measurements are carried out in flames with different hydrogen contents. By applying the Rayleigh-Debye-Gans theory and the fractal-like description, soot concentration and morphology, with the evaluation of radius of gyration, volume-mean diameter and primary particle diameter are retrieved. To derive fractal parameters such as fractal dimension and fractal prefactor to be used for optical measurements, sampling technique and TEM analysis are performed. In addition, data concerning soot morphology obtained from TEM analysis are compared with the optical results. A good agreement in the value of the primary particle diameter between optical and ex-situ measurements is found. Significant effects of hydrogen addition are detected and presented in this work. In particular, hydrogen addition to fuel is responsible for a reduction in soot concentration, radius of gyration and primary particle diameter.

Cooling Rate Determination in Additively Manufactured Aluminum Alloy 2219

NASA Astrophysics Data System (ADS)

Brice, Craig A.; Dennis, Noah

2015-05-01

Metallic additive manufacturing processes generally utilize a conduction mode, welding-type approach to create beads of deposited material that can be arranged into a three-dimensional structure. As with welding, the cooling rates in the molten pool are relatively rapid compared to traditional casting techniques. Determination of the cooling rate in the molten pool is critical for predicting the solidified microstructure and resultant properties. In this experiment, wire-fed electron beam additive manufacturing was used to melt aluminum alloy 2219 under different thermal boundary conditions. The dendrite arm spacing was measured in the remelted material, and this information was used to estimate cooling rates in the molten pool based on established empirical relationships. The results showed that the thermal boundary conditions have a significant effect on the resulting cooling rate in the molten pool. When thermal conduction is limited due to a small thermal sink, the dendrite arm spacing varies between 15 and 35 µm. When thermal conduction is active, the dendrite arm spacing varies between 6 and 12 µm. This range of dendrite arm spacing implies cooling rates ranging from 5 to 350 K/s. Cooling rates can vary greatly as thermal conditions change during deposition. A cooling rate at the higher end of the range could lead to significant deviation from microstructural equilibrium during solidification.

Rumen microbial and fermentation characteristics are affected differently by acarbose addition during two nutritional types of simulated severe subacute ruminal acidosis in vitro.

PubMed

Wang, Yue; Liu, Junhua; Yin, Yuyang; Zhu, Weiyun; Mao, Shengyong

2017-10-01

Little information is available on whether or not the effect of an alpha-glucosidase inhibitor on the prevention of ruminal acidosis is influenced by the type of diet during ruminant feeding. This study was conducted to explore the effect of acarbose addition on the prevention of severe subacute ruminal acidosis induced by either cracked wheat or beet pulp in vitro. Cracked wheat and beet pulp were fermented in vitro by rumen microorganisms obtained from three dairy cows. When cracked wheat was used as the substrate and fermented for 24 h, compared with the control, acarbose addition decreased the concentrations of acetate, propionate, butyrate, total volatile fatty acids, and lactate (P < 0.05), while linearly increased the ratio of acetate to propionate, pH value, and the ammonia-nitrogen level (P < 0.05). Applying Illumina MiSeq sequencing of a fragment of the 16S rRNA gene revealed that the relative abundance of Firmicutes and Bacteroidetes as well as the ACE (abundance-based coverage estimator) value, Chao 1 value, and Shannon index increased significantly (P < 0.05), while there was a significant reduction (P < 0.05) in the relative abundance of Tenericutes as well as Proteobacteria after adding acarbose compared to the control. On the other hand, when beet pulp was used as the substrate, acarbose addition had no significant effects (P > 0.05) on the fermentation parameters and the Chao 1 value, the Shannon index, and the proportion of Firmicutes and Bacteroidetes. In general, these findings indicate that acarbose had more effects on ruminal fermentation when wheat was used as the substrate, whereas it exhibited little effect on ruminal fermentation when beet pulp was used as the substrate. Copyright © 2017 Elsevier Ltd. All rights reserved.

Altered Microbiome Leads to Significant Phenotypic and Transcriptomic Differences in a Lipid Accumulating Chlorophyte.

PubMed

Richter, Lubna V; Mansfeldt, Cresten B; Kuan, Michael M; Cesare, Alexandra E; Menefee, Stephen T; Richardson, Ruth E; Ahner, Beth A

2018-06-19

Given the challenges facing the economically favorable production of products from microalgae, understanding factors that might impact productivity rates including growth rates and accumulation of desired products, for example, triacylglycerols (TAG) for biodiesel feedstock, remains critical. Although operational parameters such as media composition and reactor design can clearly effect growth rates, the role of microbe-microbe interactions is just beginning to be elucidated. In this study an oleaginous marine algae Chlorella spp. C596 culture is shown to be better described as a microbial community. Perturbations to this microbial community showed a significant impact on phenotypes including sustained differences in growth rate and TAG accumulation of 2.4 and 2.5 fold, respectively. Characterization of the associated community using Illumina 16S rRNA amplicon and random shotgun transcriptomic analyses showed that the fast growth rate correlated with two specific bacterial species ( Ruegeria and Rhodobacter spp). The transcriptomic response of the Chlorella species revealed that the slower growing algal consortium C596-S1 upregulated genes associated with photosynthesis and resource scavenging and decreased the expression of genes associated with transcription and translation relative to the initial C596-R1. Our studies advance the appreciation of the effects microbiomes can have on algal growth in bioreactors and suggest that symbiotic interactions are involved in a range of critical processes including nitrogen, carbon cycling, and oxidative stress.

Clinically significant and practical! Enhancing precision does make a difference. Reply to McGlinchey and Jacobson, Hsu, and Speer.

PubMed

Hageman, W J; Arrindell, W A

1999-12-01

Based on a secondary analysis of the Jacobson and Truax [Jacobson, N.S. & Truax, P. (1991). a statistical approach to defining meaningful change in psychotherapy research. Journal of Consulting and Clinical Psychology, 59, 12-19.] data using both their own traditional approach and the refined method advanced by Hageman and Arrindell [Hageman, W.J.J.M., & Arrindell, W.A. (1999). Establishing clinically significant change: increment of precision and the distinction between individual and group level of analysis. Behaviour Research and Therapy, 37, 1169-1193], McGlinchey and Jacobson [McGlinchey, J. B., & Jacobson, N. S. (1999). Clinically significant but impractical? A response to Hageman and Arrindell. Behaviour Research and Therapy, 37, 1211-1217.] reported practically identical findings on reliable and clinically significant change across the two approaches. This led McGlinchey and Jacobson to conclude that there is little practical gain in utilizing the refined method over the traditional approach. Close inspection of the data used by McGlinchey and Jacobson however revealed a serious mistake with respect to the value of the standard error of measurement that was employed in their calculations. When the proper index value was utilised, further re-analysis by the present authors disclosed clear differences (i.e. different classifications of S's) across the two approaches. Importantly, these differences followed exactly the same pattern as depicted in Table 2 in Hageman and Arrindell (1999). The theoretical advantages of the refined method, i.e. enhanced precision, appropriate distinction between analysis at the individual and group levels, and maximal comparability of findings across studies, exceed those of the traditional method. Application of the refined method may be carried out within approximately half an hour, which not only supports its practical manageability, but also challenges the suggestion of McGlinchey and Jacobson (1999) that the relevant method

The effect of additional ankle and midfoot mobilizations on plantar fasciitis: a randomized controlled trial.

PubMed

Shashua, Anat; Flechter, Shlomo; Avidan, Liat; Ofir, Dani; Melayev, Alex; Kalichman, Leonid

2015-04-01

A single-blind randomized controlled trial. To evaluate the efficacy of ankle and midfoot mobilization on pain and function of patients with plantar fasciitis (PF). Plantar fasciitis is a degenerative process of the plantar fascia, with a lifetime prevalence of approximately 10%. Limited ankle dorsiflexion is a common finding and apparently acts as a contributing factor to the development of PF. Fifty patients with PF, aged 23 to 73 years, were randomly assigned to either the intervention or control group. Both groups received 8 treatments, twice a week, consisting of stretching exercises and ultrasound. In addition, the intervention group received mobilization of the ankle and midfoot joints. Dorsiflexion range of motion was measured at the beginning and at the end of treatment. The results were evaluated by 3 outcomes: the numeric pain-rating scale, Lower Extremity Functional Scale, and algometry. No significant difference was found between groups in any of the outcomes. Both groups showed a significant difference in the numeric pain-rating scale and Lower Extremity Functional Scale. Both groups significantly improved in dorsiflexion range of motion, with no difference between groups. The addition of ankle and foot joint mobilization aimed at improving dorsiflexion range of motion is not more effective than stretching and ultrasound alone in treating PF. The association between limited ankle dorsiflexion and PF is most probably due to soft tissue limitations, not the joints. Trial registered at ClinicalTrials.gov (registration number NCT01439932). Therapy, level 1b.

On central-difference and upwind schemes

NASA Technical Reports Server (NTRS)

Swanson, R. C.; Turkel, Eli

1990-01-01

A class of numerical dissipation models for central-difference schemes constructed with second- and fourth-difference terms is considered. The notion of matrix dissipation associated with upwind schemes is used to establish improved shock capturing capability for these models. In addition, conditions are given that guarantee that such dissipation models produce a Total Variation Diminishing (TVD) scheme. Appropriate switches for this type of model to ensure satisfaction of the TVD property are presented. Significant improvements in the accuracy of a central-difference scheme are demonstrated by computing both inviscid and viscous transonic airfoil flows.

Congruence of Additive and Non-Additive Effects on Gene Expression Estimated from Pedigree and SNP Data

PubMed Central

Powell, Joseph E.; Henders, Anjali K.; McRae, Allan F.; Kim, Jinhee; Hemani, Gibran; Martin, Nicholas G.; Dermitzakis, Emmanouil T.; Gibson, Greg

2013-01-01

There is increasing evidence that heritable variation in gene expression underlies genetic variation in susceptibility to disease. Therefore, a comprehensive understanding of the similarity between relatives for transcript variation is warranted—in particular, dissection of phenotypic variation into additive and non-additive genetic factors and shared environmental effects. We conducted a gene expression study in blood samples of 862 individuals from 312 nuclear families containing MZ or DZ twin pairs using both pedigree and genotype information. From a pedigree analysis we show that the vast majority of genetic variation across 17,994 probes is additive, although non-additive genetic variation is identified for 960 transcripts. For 180 of the 960 transcripts with non-additive genetic variation, we identify expression quantitative trait loci (eQTL) with dominance effects in a sample of 339 unrelated individuals and replicate 31% of these associations in an independent sample of 139 unrelated individuals. Over-dominance was detected and replicated for a trans association between rs12313805 and ETV6, located 4MB apart on chromosome 12. Surprisingly, only 17 probes exhibit significant levels of common environmental effects, suggesting that environmental and lifestyle factors common to a family do not affect expression variation for most transcripts, at least those measured in blood. Consistent with the genetic architecture of common diseases, gene expression is predominantly additive, but a minority of transcripts display non-additive effects. PMID:23696747

Congruence of additive and non-additive effects on gene expression estimated from pedigree and SNP data.

PubMed

Powell, Joseph E; Henders, Anjali K; McRae, Allan F; Kim, Jinhee; Hemani, Gibran; Martin, Nicholas G; Dermitzakis, Emmanouil T; Gibson, Greg; Montgomery, Grant W; Visscher, Peter M

2013-05-01

There is increasing evidence that heritable variation in gene expression underlies genetic variation in susceptibility to disease. Therefore, a comprehensive understanding of the similarity between relatives for transcript variation is warranted--in particular, dissection of phenotypic variation into additive and non-additive genetic factors and shared environmental effects. We conducted a gene expression study in blood samples of 862 individuals from 312 nuclear families containing MZ or DZ twin pairs using both pedigree and genotype information. From a pedigree analysis we show that the vast majority of genetic variation across 17,994 probes is additive, although non-additive genetic variation is identified for 960 transcripts. For 180 of the 960 transcripts with non-additive genetic variation, we identify expression quantitative trait loci (eQTL) with dominance effects in a sample of 339 unrelated individuals and replicate 31% of these associations in an independent sample of 139 unrelated individuals. Over-dominance was detected and replicated for a trans association between rs12313805 and ETV6, located 4MB apart on chromosome 12. Surprisingly, only 17 probes exhibit significant levels of common environmental effects, suggesting that environmental and lifestyle factors common to a family do not affect expression variation for most transcripts, at least those measured in blood. Consistent with the genetic architecture of common diseases, gene expression is predominantly additive, but a minority of transcripts display non-additive effects.

Attentional capture by evaluative stimuli: gain- and loss-connoting colors boost the additional-singleton effect.

PubMed

Wentura, Dirk; Müller, Philipp; Rothermund, Klaus

2014-06-01

In a valence induction task, one color acquired positive valence by indicating the chance to win money (in the case of fast and correct responses), and a different color acquired negative valence by indicating the danger to lose money (in the case of slow or incorrect responses). In the additional-singleton trials of a visual search task, the task-irrelevant singleton color was either the positive one, the negative one, or one of two neutral colors. We found an additional-singleton effect (i.e., longer RTs with a singleton color than in the no-singleton control condition). This effect was significantly increased for the two valent colors (with no differences between them) relative to the two neutral colors (with no differences between them, either). This result favors the hypothesis that the general relevance of stimuli elicits attentional capture, rather than the negativity bias hypothesis.

Unravelling the differences in attrition and academic performance of international and domestic nursing students with English as an additional language.

PubMed

Zheng, Roy Xun; Everett, Bronwyn; Glew, Paul; Salamonson, Yenna

2014-12-01

High attrition and academic underperformance have been highlighted among students who speak English as an additional language (EAL) in higher education, and a lack of language skills is often cited as a key explanatory factor. Although the relationship between English-language skills and academic performance among EAL students has been established, group differences between international and domestic EAL nursing students is not known. The aim of this study was to compare attrition rates and academic performance of international and domestic EAL nursing students, taking into consideration levels of English-language usage and socio-demographic characteristics of these groups. A prospective correlational study. From 2010 to 2012, nursing students at a large Australian university, who attended an orientation session before course commencement, were invited to complete a survey to assess their English-language usage. Data collected included students' enrolment status and GPA at 12months. Compared with their domestic counterparts, the attrition rate of international EAL students was significantly lower (7.9% versus 13.3%, p=0.018). Similarly, international students also had higher GPAs (4.1 versus 4.0, p=0.011). Although the levels of English-language usage were not related to academic performance, recent arrivals in both international (p=0.047) and domestic (p=0.001) student groups had higher GPAs. This study suggests that language acculturation, indicated by English-language usage and the length of stay in the host country, was not sufficient to ensure successful transition into the academic environment for either international or domestic EAL nursing students. Copyright © 2014 Elsevier Ltd. All rights reserved.

Creating Significant Learning Experiences across Disciplines

ERIC Educational Resources Information Center

Levine, Laura E.; Fallahi, Carolyn R.; Nicoll-Senft, Joan M.; Tessier, Jack T.; Watson, Cheryl L.; Wood, Rebecca M.

2008-01-01

The purpose of this study was to use Fink's (2003) taxonomy of significant learning to redesign courses and assess student learning. Significant improvements were found across the semester for students in the six courses, but there were differences in which taxa showed improvement in each course. The meta-analysis showed significant, positive…

Application of response surface methodology in optimization of lactic acid fermentation of radish: effect of addition of salt, additives and growth stimulators.

PubMed

Joshi, V K; Chauhan, Arjun; Devi, Sarita; Kumar, Vikas

2015-08-01

Lactic acid fermentation of radish was conducted using various additive and growth stimulators such as salt (2 %-3 %), lactose, MgSO4 + MnSO4 and Mustard (1 %, 1.5 % and 2 %) to optimize the process. Response surface methodology (Design expert, Trial version 8.0.5.2) was applied to the experimental data for the optimization of process variables in lactic acid fermentation of radish. Out of various treatments studied, only the treatments having ground mustard had an appreciable effect on lactic acid fermentation. Both linear and quadratic terms of the variables studied had a significant effect on the responses studied. The interactions between the variables were found to contribute to the response at a significant level. The best results were obtained in the treatment with 2.5 % salt, 1.5 % lactose, 1.5 % (MgSO4 + MnSO4) and 1.5 % mustard. These optimized concentrations increased titrable acidity and LAB count, but lowered pH. The second-order polynomial regression model determined that the highest titrable acidity (1.69), lowest pH (2.49) and maximum LAB count (10 × 10(8) cfu/ml) would be obtained at these concentrations of additives. Among 30 runs conducted, run 2 has got the optimum concentration of salt- 2.5 %, lactose- 1.5 %, MgSO4 + MnSO4- 1.5 % and mustard- 1.5 % for lactic acid fermentation of radish. The values for different additives and growth stimulators optimized in this study could successfully be employed for the lactic acid fermentation of radish as a postharvest reduction tool and for product development.

The specification of personalised insoles using additive manufacturing.

PubMed

Salles, André S; Gyi, Diane E

2012-01-01

Research has been conducted to explore a process that delivers insoles for personalised footwear for the high street using additive manufacturing (AM) and to evaluate the use of such insoles in terms of discomfort. Therefore, the footwear personalisation process was first identified: (1) foot capture; (2) anthropometric measurements; (3) insole design; and (4) additive manufacturing. In order to explore and evaluate this process, recreational runners were recruited. They had both feet scanned and 15 anthropometric measurements taken. Personalised insoles were designed from the scans and manufactured using AM. Participants were fitted with footwear under two experimental conditions: personalised and control, which were compared in terms of discomfort. The mean ratings for discomfort variables were generally low for both conditions and no significant differences were detected between conditions. In general, the personalisation process showed promise in terms of the scan data, although the foot capture position may not be considered 'gold standard'. Polyamide, the material used for the insoles, demonstrated positive attributes: visual inspection revealed no signs of breaking. The footwear personalisation process described and explored in this study shows potential and can be considered a good starting point for designer and researchers.

[Effect of biochar addition on soil evaporation.

PubMed

Xu, Jian; Niu, Wen Quan; Zhang, Ming Zhi; Li, Yuan; Lyu, Wang; Li, Kang-Yong; Zou, Xiao-Yang; Liang, Bo-Hui

2016-11-18

In order to determine the rational amount of biochar application and its effect on soil hydrological processes in arid area, soil column experiments were conducted in the laboratory using three biochar additions (5%, 10% and 15%) and four different biochar types (d<0.25 mm bamboo charcoal, 0.25 mm addition of biochar could change the phreatic water recharge, soil water-holding capacity, capillary water upward movement and soil evaporation obviously. But the effects were different depending on the type of biochar raw material and the size of particle. The phreatic water recharge increased with the increasing amount of biochar addition. The addition of biochar could obviously enlarge the soil water-holding capacity and promote the capillary water upward movement rate. This effect was greater when using the material of bamboo charcoal compared with using wood charcoal, while biochar with small particle size had greater impact than that with big particle size. The biochar could effectively restrain the soil evaporation at a low addition amount (5%). But it definitely promoted the soil evaporation if the addition amount was very high. In arid area, biochar addition in appropriate amount could improve soil water retention capacity.

Evaluation of non-additive genetic variation in feed-related traits of broiler chickens.

PubMed

Li, Y; Hawken, R; Sapp, R; George, A; Lehnert, S A; Henshall, J M; Reverter, A

2017-03-01

Genome-wide association mapping and genomic predictions of phenotype of individuals in livestock are predominately based on the detection and estimation of additive genetic effects. Non-additive genetic effects are largely ignored. Studies in animals, plants, and humans to assess the impact of non-additive genetic effects in genetic analyses have led to differing conclusions. In this paper, we examined the consequences of including non-additive genetic effects in genome-wide association mapping and genomic prediction of total genetic values in a commercial population of 5,658 broiler chickens genotyped for 45,176 single nucleotide polymorphism (SNP) markers. We employed mixed-model equations and restricted maximum likelihood to analyze 7 feed related traits (TRT1 - TRT7). Dominance variance accounted for a significant proportion of the total genetic variance in all 7 traits, ranging from 29.5% for TRT1 to 58.4% for TRT7. Using a 5-fold cross-validation schema, we found that in spite of the large dominance component, including the estimated dominance effects in the prediction of total genetic values did not improve the accuracy of the predictions for any of the phenotypes. We offer some possible explanations for this counter-intuitive result including the possible confounding of dominance deviations with common environmental effects such as hatch, different directional effects of SNP additive and dominance variations, and the gene-gene interactions' failure to contribute to the level of variance. © 2016 Poultry Science Association Inc.

Cognitive Processes that Account for Mental Addition Fluency Differences between Children Typically Achieving in Arithmetic and Children At-Risk for Failure in Arithmetic

ERIC Educational Resources Information Center

Berg, Derek H.; Hutchinson, Nancy L.

2010-01-01

This study investigated whether processing speed, short-term memory, and working memory accounted for the differential mental addition fluency between children typically achieving in arithmetic (TA) and children at-risk for failure in arithmetic (AR). Further, we drew attention to fluency differences in simple (e.g., 5 + 3) and complex (e.g., 16 +…

Microbial biosurfactants as additives for food industries.

PubMed

Campos, Jenyffer Medeiros; Stamford, Tânia Lúcia Montenegro; Sarubbo, Leonie Asfora; de Luna, Juliana Moura; Rufino, Raquel Diniz; Banat, Ibrahim M

2013-01-01

Microbial biosurfactants with high ability to reduce surface and interfacial surface tension and conferring important properties such as emulsification, detergency, solubilization, lubrication and phase dispersion have a wide range of potential applications in many industries. Significant interest in these compounds has been demonstrated by environmental, bioremediation, oil, petroleum, food, beverage, cosmetic and pharmaceutical industries attracted by their low toxicity, biodegradability and sustainable production technologies. Despite having significant potentials associated with emulsion formation, stabilization, antiadhesive and antimicrobial activities, significantly less output and applications have been reported in food industry. This has been exacerbated by uneconomical or uncompetitive costing issues for their production when compared to plant or chemical counterparts. In this review, biosurfactants properties, present uses and potential future applications as food additives acting as thickening, emulsifying, dispersing or stabilising agents in addition to the use of sustainable economic processes utilising agro-industrial wastes as alternative substrates for their production are discussed. © 2013 American Institute of Chemical Engineers.

Significant Correlation between TLR2 Agonist Activity and TNF-α Induction in J774.A1 Macrophage Cells by Different Medicinal Mushroom Products.

PubMed

Coy, Catherine; Standish, Leanna J; Bender, Geoff; Lu, Hailing

2015-01-01

In the US market, there is a variety of mushroom preparations available, even within the same species of mushroom. Nonetheless, little is known about whether species or the various extraction methods affect biological activity and potency of the immune modulatory activity of mushroom extracts. After discovering that protein-bound polysaccharide-K, a hot water extract from Trametes versicolor, was a potent Toll-like receptor (TLR)-2 agonist that stimulates both innate and adaptive immunity, this study was initiated to evaluate whether other medicinal mushroom products also have TLR2 agonist activity and immune-enhancing potential as measured by the induction of tumor necrosis factor (TNF)-α in J774.A1 murine macrophage cells. Furthermore, the products were divided by extraction method and species to determine whether these factors affect their immunomodulatory activity. The results showed that the majority (75%) of mushroom products tested had TLR2 agonist activity and that there was a significant correlation between TLR2 agonist activity and TNF-α induction potential in the mushroom products analyzed. In addition, the data demonstrated that hot water mushroom extracts are more potent than ground mushroom products in activating TLR2 and inducing TNF-α. These data provide evidence that extraction methods may affect the biological activity of mushroom products; thus, further studies are warranted to investigate the structural differences between various mushroom products.

Boron carbide nanostructures: A prospective material as an additive in concrete

NASA Astrophysics Data System (ADS)

Singh, Paviter; Kaur, Gurpreet; Kumar, Rohit; Kumar, Umesh; Singh, Kulwinder; Kumar, Manjeet; Bala, Rajni; Meena, Ramovatar; Kumar, Akshay

2018-05-01

In recent decades, manufacture and ingestion of concrete have increased particularly in developing countries. Due to its low cost, safety and strength, concrete have become an economical choice for protection of radiation shielding material in nuclear reactors. As boron carbide has been known as a neutron absorber material makes it a great candidate as an additive in concrete for shielding radiation. This paper presents the synthesis of boron carbide nanostructures by using ball milling method. The X-ray diffraction pattern, Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope analysis confirms the formation of boron carbide nanostructures. The effect of boron carbide nanostructures on the strength of concrete samples was demonstrated. The compressive strength tests of concrete cube B4C powder additives for 0 % and 5 % of total weight of cement was compared for different curing time period such as 7, 14, 21 and 28 days. The high compressive strength was observed when 5 wt % boron carbide nanostructures were used as an additive in concrete samples after 28 days curing time and showed significant improvement in strength.

Significant difference in active metabolite levels of ginseng in humans consuming Asian or Western diet: The link with enteric microbiota.

PubMed

Wan, Jin-Yi; Wang, Chong-Zhi; Zhang, Qi-Hui; Liu, Zhi; Musch, Mark W; Bissonnette, Marc; Chang, Eugene B; Li, Ping; Qi, Lian-Wen; Yuan, Chun-Su

2017-04-01

After ingestion of ginseng, the bioavailability of its parent compounds is low and enteric microbiota plays an important role in parent compound biotransformation to their metabolites. Diet type can influence the enteric microbiota profile. When human subjects on different diets ingest ginseng, their different gut microbiota profiles may influence the metabolism of ginseng parent compounds. In this study, the effects of different diet type on gut microbiota metabolism of American ginseng saponins were investigated. We recruited six healthy adults who regularly consumed different diet types. These subjects received 7 days' oral American ginseng, and their biological samples were collected for LC-Q-TOF-MS analysis. We observed significant ginsenoside Rb 1 (a major parent compound) and compound K (a major active metabolite) level differences in the samples from the subjects consuming different diets. Subjects on an Asian diet had much higher Rb 1 levels but much lower compound K levels compared with those on a Western diet. Since compound K possesses much better cancer chemoprevention potential, our data suggested that consumers on a Western diet should obtain better cancer prevention effects with American ginseng intake compared with those on an Asian diet. Ginseng compound levels could be enhanced or reduced via gut microbiota manipulation for clinical utility. Copyright © 2016 John Wiley & Sons, Ltd.

Cross-hemispheric dopamine projections have functional significance

PubMed Central

Fox, Megan E.; Mikhailova, Maria A.; Bass, Caroline E.; Takmakov, Pavel; Gainetdinov, Raul R.; Budygin, Evgeny A.; Wightman, R. Mark

2016-01-01

Dopamine signaling occurs on a subsecond timescale, and its dysregulation is implicated in pathologies ranging from drug addiction to Parkinson’s disease. Anatomic evidence suggests that some dopamine neurons have cross-hemispheric projections, but the significance of these projections is unknown. Here we report unprecedented interhemispheric communication in the midbrain dopamine system of awake and anesthetized rats. In the anesthetized rats, optogenetic and electrical stimulation of dopamine cells elicited physiologically relevant dopamine release in the contralateral striatum. Contralateral release differed between the dorsal and ventral striatum owing to differential regulation by D2-like receptors. In the freely moving animals, simultaneous bilateral measurements revealed that dopamine release synchronizes between hemispheres and intact, contralateral projections can release dopamine in the midbrain of 6-hydroxydopamine–lesioned rats. These experiments are the first, to our knowledge, to show cross-hemispheric synchronicity in dopamine signaling and support a functional role for contralateral projections. In addition, our data reveal that psychostimulants, such as amphetamine, promote the coupling of dopamine transients between hemispheres. PMID:27298371

Experimental study on agitated drying characteristics of sewage sludge under the effects of different additive agents.

PubMed

Deng, Wenyi; Su, Yaxin

2014-07-01

Drying experiments of dewatered sewage sludge (DSS) were conducted on a agitated paddle dryer, and the effects of additive agents, i.e., CaO, pulverized coal (PC), heavy oil (HO), and dried sludge ("DS" through back mixing) on the agitated drying characteristics of DSS were investigated. The results indicated that CaO can significantly increase the drying rate of DSS. The drying rate at CaO/DSS (mass ratio)=1/100 was 135% higher than that of CaO/DSS=0. Pulverized coal has no obvious effect on drying rate, but the increase of PC/DSS can promote breaking up of sludge lump. Heavy oil was found to be slightly effective in improving the drying rate of DSS in the examined experimental range of HO/DSS=0-1/20. It is also found that HO can reduce the torque of the dryer shaft, due to its lubrication effect. Back mixing of DS was found to be effective in alleviating the unfavorable effect of the lumpy phase by improving the mixing effect of the paddle dryer. There was a marked increase of drying rate with an increase of the DS/DSS in the experimental range of DS/DSS=0-1/3. Copyright © 2014. Published by Elsevier B.V.

Degradation kinetics of the antioxidant additive ascorbic acid in packed table olives during storage at different temperatures.

PubMed

Montaño, A; Casado, F J; Rejano, L; Sanchez, A H; de Castro, A

2006-03-22

The kinetics of ascorbic acid (AA) loss during storage of packed table olives with two different levels of added AA was investigated. Three selected storage temperatures were assayed: 10 degrees C, ambient (20-24 degrees C), and 40 degrees C. The study was carried out in both pasteurized and unpasteurized product. The effect of pasteurization treatment alone on added AA was not significant. In the pasteurized product, in general AA degraded following a first-order kinetics. The activation energy calculated by using the Arrhenius model averaged 9 kcal/mol. For each storage temperature, the increase in initial AA concentration significantly decreased the AA degradation rate. In the unpasteurized product, AA was not detected after 20 days in samples stored at room temperature and AA degradation followed zero-order kinetics at 10 degrees C, whereas at 40 degrees C a second-order reaction showed the best fit. In both pasteurized and unpasteurized product, the low level of initial dehydroascorbic acid disappeared during storage. Furfural appeared to be formed during storage, mainly at 40 degrees C, following zero-order kinetics.

Photoreceptor change and visual outcome after idiopathic epiretinal membrane removal with or without additional internal limiting membrane peeling.

PubMed

Ahn, Seong Joon; Ahn, Jeeyun; Woo, Se Joon; Park, Kyu Hyung

2014-01-01

To compare the postoperative photoreceptor status and visual outcome after epiretinal membrane removal with or without additional internal limiting membrane (ILM) peeling. Medical records of 40 eyes from 37 patients undergoing epiretinal membrane removal with residual ILM peeling (additional ILM peeling group) and 69 eyes from 65 patients undergoing epiretinal membrane removal without additional ILM peeling (no additional peeling group) were reviewed. The length of defects in cone outer segment tips, inner segment/outer segment junction, and external limiting membrane line were measured using spectral domain optical coherence tomography images of the fovea before and at 1, 3, 6, and 12 months after the surgery. Cone outer segment tips and inner segment/outer segment junction line defects were most severe at postoperative 1 month and gradually restored at 12 months postoperatively. The cone outer segment tips line defect in the additional ILM peeling group was significantly greater than that in the no additional peeling group at postoperative 1 month (P = 0.006), and best-corrected visual acuity was significantly worse in the former group at the same month (P = 0.001). There was no significant difference in the defect size and best-corrected visual acuity at subsequent visits and recurrence rates between the two groups. Patients who received epiretinal membrane surgery without additional ILM peeling showed better visual and anatomical outcome than those with additional ILM peeling at postoperative 1 month. However, surgical outcomes were comparable between the two groups, thereafter. In terms of visual outcome and photoreceptor integrity, additional ILM peeling may not be an essential procedure.

Comparing GWAS Results of Complex Traits Using Full Genetic Model and Additive Models for Revealing Genetic Architecture

PubMed Central

Monir, Md. Mamun; Zhu, Jun

2017-01-01

Most of the genome-wide association studies (GWASs) for human complex diseases have ignored dominance, epistasis and ethnic interactions. We conducted comparative GWASs for total cholesterol using full model and additive models, which illustrate the impacts of the ignoring genetic variants on analysis results and demonstrate how genetic effects of multiple loci could differ across different ethnic groups. There were 15 quantitative trait loci with 13 individual loci and 3 pairs of epistasis loci identified by full model, whereas only 14 loci (9 common loci and 5 different loci) identified by multi-loci additive model. Again, 4 full model detected loci were not detected using multi-loci additive model. PLINK-analysis identified two loci and GCTA-analysis detected only one locus with genome-wide significance. Full model identified three previously reported genes as well as several new genes. Bioinformatics analysis showed some new genes are related with cholesterol related chemicals and/or diseases. Analyses of cholesterol data and simulation studies revealed that the full model performs were better than the additive-model performs in terms of detecting power and unbiased estimations of genetic variants of complex traits. PMID:28079101

Plant extracts as phytogenic additives considering intake, digestibility, and feeding behavior of sheep.

PubMed

da Silva, Camila Sousa; de Souza, Evaristo Jorge Oliveira; Pereira, Gerfesson Felipe Cavalcanti; Cavalcante, Edwilka Oliveira; de Lima, Ewerton Ivo Martins; Torres, Thaysa Rodrigues; da Silva, José Ricardo Coelho; da Silva, Daniel Cézar

2017-02-01

The objective was to evaluate the intake, digestibility, and ingestive sheep behavior with feeding phytogenic additives derived from plant extracts. Five non-emasculated sheep without defined breed at 28 ± 1.81 kg initial body weight and 6 months age were used. Treatments consisted of administering four phytogenic additives from the garlic extracts, coriander seed, oregano, and pods of mesquite, plus a control treatment (without additive). The ration was composed of Tifton 85 hay grass, corn, soybean meal, and mineral salt. As experimental design, we used a 5 × 5 Latin square design (five treatments and five periods). The data were analyzed through the mixed model through the procedure PROC MIXED of software Systems Statistical Analysis version 9.1, with comparation analysis between the treatment without additive (control) with phytogenic additives produced from vegetable extracts of mesquite pod, of coriander seed, the bulb of garlic, and the oregano leaves. There were no significant differences for the nutrient intake and ingestive behavior patterns. However, the additive intake derived from mesquite pods and coriander extracts provided an increase in digestibility. Extracts from garlic, coriander, and mesquite pods can be used as phytogenic additives in feeding sheep.

Influence of Polarization on Carbohydrate Hydration: A Comparative Study Using Additive and Polarizable Force Fields.

PubMed

Pandey, Poonam; Mallajosyula, Sairam S

2016-07-14

Carbohydrates are known to closely modulate their surrounding solvent structures and influence solvation dynamics. Spectroscopic investigations studying far-IR regions (below 1000 cm(-1)) have observed spectral shifts in the libration band (around 600 cm(-1)) of water in the presence of monosaccharides and polysaccharides. In this paper, we use molecular dynamics simulations to gain atomistic insight into carbohydrate-water interactions and to specifically highlight the differences between additive (nonpolarizable) and polarizable simulations. A total of six monosaccharide systems, α and β anomers of glucose, galactose, and mannose, were studied using additive and polarizable Chemistry at HARvard Macromolecular Mechanics (CHARMM) carbohydrate force fields. Solvents were modeled using three additive water models TIP3P, TIP4P, and TIP5P in additive simulations and polarizable water model SWM4 in polarizable simulations. The presence of carbohydrate has a significant effect on the microscopic water structure, with the effects being pronounced for proximal water molecules. Notably, disruption of the tetrahedral arrangement of proximal water molecules was observed due to the formation of strong carbohydrate-water hydrogen bonds in both additive and polarizable simulations. However, the inclusion of polarization resulted in significant water-bridge occupancies, improved ordered water structures (tetrahedral order parameter), and longer carbohydrate-water H-bond correlations as compared to those for additive simulations. Additionally, polarizable simulations also allowed the calculation of power spectra from the dipole-dipole autocorrelation function, which corresponds to the IR spectra. From the power spectra, we could identify spectral signatures differentiating the proximal and bulk water structures, which could not be captured from additive simulations.

Lidocaine spray in addition to paracervical block reduces pain during first-trimester surgical abortion: a placebo-controlled clinical trial.

PubMed

Karasahin, Kazim Emre; Alanbay, Ibrahim; Ercan, C Mutlu; Mesten, Zeki; Simsek, Canan; Başer, Iskender

2011-04-01

A variety of anesthetic and analgesic techniques have been used for uterine aspiration, and most clinicians use a paracervical block with or without additional analgesia. We intended to evaluate whether the addition of 10% lidocaine spray to a paracervical block decreases pain during cervical dilation and uterine aspiration. Seventy-seven patients were divided into two groups: paracervical blocks (PCB) (n = 30) and PCB plus 10% lidocaine spray (n = 47). Anticipated and overall perceived pain scores were measured with a standard Visual Analog Scale (VAS). Anticipated pain VAS scores of two groups were similar, however overall perceived pain VAS scores demonstrated a significant difference. PCB with Lidocaine only group had 6.56 ± 1.43 cm mean VAS score, whereas lidocaine plus lidocaine spray group had 2.35 ± 1.39 cm, the difference being statistically significant (p < .01). We found that 10% lidocaine spray safely decreases perceived pain during first-trimester surgical abortion, when used in addition to PCB with lidocaine HCl. Copyright © 2011 Elsevier Inc. All rights reserved.

Terminal addition in a cellular world.

PubMed

Torday, J S; Miller, William B

2018-07-01

Recent advances in our understanding of evolutionary development permit a reframed appraisal of Terminal Addition as a continuous historical process of cellular-environmental complementarity. Within this frame of reference, evolutionary terminal additions can be identified as environmental induction of episodic adjustments to cell-cell signaling patterns that yield the cellular-molecular pathways that lead to differing developmental forms. Phenotypes derive, thereby, through cellular mutualistic/competitive niche constructions in reciprocating responsiveness to environmental stresses and epigenetic impacts. In such terms, Terminal Addition flows according to a logic of cellular needs confronting environmental challenges over space-time. A reconciliation of evolutionary development and Terminal Addition can be achieved through a combined focus on cell-cell signaling, molecular phylogenies and a broader understanding of epigenetic phenomena among eukaryotic organisms. When understood in this manner, Terminal Addition has an important role in evolutionary development, and chronic disease might be considered as a form of 'reverse evolution' of the self-same processes. Copyright © 2017. Published by Elsevier Ltd.

Changes in litter quality induced by nutrient addition alter litter decomposition in an alpine meadow on the Qinghai-Tibet Plateau

PubMed Central

Zhu, Wenyan; Wang, Jinzhou; Zhang, Zhenhua; Ren, Fei; Chen, Litong; He, Jin-Sheng

2016-01-01

The effects of nitrogen (N) and phosphorus (P) addition on litter decomposition are poorly understood in Tibetan alpine meadows. Leaf litter was collected from plots within a factorial N × P addition experiment and allowed to decompose over 708 days in an unfertilized plot to determine the effects of N and/or P addition on litter decomposition. Results showed that nutrient addition significantly affected initial P and P-related biochemical properties of litter from all four species. However, the responses of litter N and N-related biochemical properties to nutrient addition were quite species-specific. Litter C decomposition and N release were species-specific. However, N and P addition significantly affected litter P release. Ratios of Hemicellulose + Cellulose to N and P were significantly related to litter C decomposition; C:N ratio was a determinant of litter N release; and C:P and (Hemicellulose + Cellulose):P controlled litter P release. Overall, litter C decomposition was controlled by litter quality of different plant species, and strongly affected by P addition. Increasing N availability is likely to affect litter C decomposition more indirectly by shifting plant species composition than directly by improving litter quality, and may accelerate N and P cycles, but shift the ecosystem to P limitation. PMID:27694948

Young children's use of derived fact strategies for addition and subtraction

PubMed Central

Dowker, Ann

2014-01-01

Forty-four children between 6;0 and 7;11 took part in a study of derived fact strategy use. They were assigned to addition and subtraction levels on the basis of calculation pretests. They were then given Dowker's (1998) test of derived fact strategies in addition, involving strategies based on the Identity, Commutativity, Addend +1, Addend −1, and addition/subtraction Inverse principles; and test of derived fact strategies in subtraction, involving strategies based on the Identity, Minuend +1, Minuend −1, Subtrahend +1, Subtrahend −1, Complement and addition/subtraction Inverse principles. The exact arithmetic problems given varied according to the child's previously assessed calculation level and were selected to be just a little too difficult for the child to solve unaided. Children were given the answer to a problem and then asked to solve another problem that could be solved quickly by using this answer, together with the principle being assessed. The children also took the WISC Arithmetic subtest. Strategies differed greatly in difficulty, with Identity being the easiest, and the Inverse and Complement principles being most difficult. The Subtrahend +1 and Subtrahend −1 problems often elicited incorrect strategies based on an overextension of the principles of addition to subtraction. It was concluded that children may have difficulty with understanding and applying the relationships between addition and subtraction. Derived fact strategy use was significantly related to both calculation level and to WISC Arithmetic scaled score. PMID:24431996

Sibling Competition & Growth Tradeoffs. Biological vs. Statistical Significance.

PubMed

Kramer, Karen L; Veile, Amanda; Otárola-Castillo, Erik

2016-01-01

Early childhood growth has many downstream effects on future health and reproduction and is an important measure of offspring quality. While a tradeoff between family size and child growth outcomes is theoretically predicted in high-fertility societies, empirical evidence is mixed. This is often attributed to phenotypic variation in parental condition. However, inconsistent study results may also arise because family size confounds the potentially differential effects that older and younger siblings can have on young children's growth. Additionally, inconsistent results might reflect that the biological significance associated with different growth trajectories is poorly understood. This paper addresses these concerns by tracking children's monthly gains in height and weight from weaning to age five in a high fertility Maya community. We predict that: 1) as an aggregate measure family size will not have a major impact on child growth during the post weaning period; 2) competition from young siblings will negatively impact child growth during the post weaning period; 3) however because of their economic value, older siblings will have a negligible effect on young children's growth. Accounting for parental condition, we use linear mixed models to evaluate the effects that family size, younger and older siblings have on children's growth. Congruent with our expectations, it is younger siblings who have the most detrimental effect on children's growth. While we find statistical evidence of a quantity/quality tradeoff effect, the biological significance of these results is negligible in early childhood. Our findings help to resolve why quantity/quality studies have had inconsistent results by showing that sibling competition varies with sibling age composition, not just family size, and that biological significance is distinct from statistical significance.

Physiological responses to nitrogen and sulphur addition and raised temperature in Sphagnum balticum.

PubMed

Granath, Gustaf; Wiedermann, Magdalena M; Strengbom, Joachim

2009-09-01

Sphagnum, the main genus which forms boreal peat, is strongly affected by N and S deposition and raised temperature, but the physiological mechanisms behind the responses are largely unknown. We measured maximum photosynthetic rate (NP(max)), maximum efficiency of photosystem II [variable fluorescence (F (v))/maximum fluorescence yield (F (m))] and concentrations of N, C, chlorophyll and carotenoids as responses to N and S addition and increased temperature in Sphagnum balticum (a widespread species in the northern peatlands) in a 12-year factorial experiment. NP(max) did not differ between control (0.2 g N m(-2) year(-1)) and high N (3.0 g N m(-2) year(-1)), but was higher in the mid N treatment (1.5 g N m(-2) year(-1)). N, C, carotenoids and chlorophyll concentration increased in shoot apices after N addition. F (v)/F (m) did not differ between N treatments. Increased temperature (+3.6 degrees C) had a small negative effect on N concentration, but had no significant effect on NP(max) or F (v)/F (m). Addition of 2 g S m(-2) year(-1) showed a weak negative effect on NP(max) and F (v)/F (m). Our results suggest a unimodal response of NP(max) to N addition and tissue N concentration in S. balticum, with an optimum N concentration for photosynthetic rate of ~13 mg N g(-1). In conclusion, high S deposition may reduce photosynthetic capacity in Sphagnum, but the negative effects may be relaxed under high N availability. We suggest that previously reported negative effects on Sphagnum productivity under high N deposition are not related to negative effects on the photosynthetic apparatus, but differences in optimum N concentration among Sphagnum species may affect their competitive ability under different N deposition regimes.

Electric utility use of fireside additives. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Locklin, D.W.; Krause, H.H.; Anson, D.

1980-01-01

Fireside additives have been used or proposed for use in fossil-fired utility boilers to combat a number of problems related to boiler performance and reliability. These problems include corrosion, fouling, superheat control, and acidic emissions. Fuel additives and other fireside additives have been used mainly with oil firing; however, there is growing experience with additives in coal-firing, especially for flyash conditioning to improve the performance of electrostatic precipitators. In decisions regarding the selection and use of additives, utilities have had to rely extensively on empiricism, due partly to an incomplete understanding of processes involved and partly to the limited amountmore » of quantitative data. The study reported here was sponsored by the Electric Power Research Institute to assemble and analyze pertinent operating experience and to recommend guidelines for utility decisions on the use of additives. The combined results of the state-of-the-art review of technical literature and a special survey of utility experience are reported. A total of 38 utilities participated in the survey, providing information on trials conducted on 104 units in 93 different plants. Altogether, 445 separate trials were reported, each representing a unit/additive/fuel combination. Additives used in these trials included 90 different additive formulations, both pure compounds and proprietary products. These formulations were categorized into 37 generic classes according to their chemical constituents, and the results of the survey are presented by these generic classes. The findings are organized according to the operating problems for which fireside additives are used. Guidelines are presented for utility use in additive selection and in planning additive trials.« less

The Effect of Li Additions on Wear Properties of Al-Mg2Si Cast In-situ Composites

NASA Astrophysics Data System (ADS)

Ghorbani, M. R.; Emamy, M.; Ghiasinejad, J.; Malekan, A.

2010-06-01

Wear rate of a modified Al-Mg2Si composite was studied by the use of a conventional pin-on-disc technique. In-situ Al-Mg2Si composites (15, 20, 25 wt.%) were cast in a simple cylindrical mold. 0.3 wt.% Li was added into the molten composite to modify its microstructure. It has been found that Li addition decreases the mean size of primary Mg2Si particles. The wear behavior of different composites at different rates revealed that Li addition increases the wear properties of Al-15%Mg2Si to some extent but it did not have any significant influence on wear properties of two other composites.

Heme Derived from Corynebacterium glutamicum: A Potential Iron Additive for Swine and an Electron Carrier Additive for Lactic Acid Bacterial Culture.

PubMed

Choi, Su-In; Park, Jihoon; Kim, Pil

2017-03-28

To investigate the potential applications of bacterial heme, aminolevulinic acid synthase (HemA) was expressed in a Corynebacterium glutamicum HA strain that had been adaptively evolved against oxidative stress. The red pigment from the constructed strain was extracted and it exhibited the typical heme absorbance at 408 nm from the spectrum. To investigate the potential of this strain as an iron additive for swine, a prototype feed additive was manufactured in pilot scale by culturing the strain in a 5 ton fermenter followed by spray-drying the biomass with flour as an excipient (biomass: flour = 1:10 (w/w)). The 10% prototype additive along with regular feed was supplied to a pig, resulting in a 1.1 kg greater increase in weight gain with no diarrhea in 3 weeks as compared with that in a control pig that was fed an additive containing only flour. To verify if C. glutamicum -synthesized heme is a potential electron carrier, lactic acid bacteria were cultured under aerobic conditions with the extracted heme. The biomasses of the aerobically grown Lactococcus lactis , Lactobacillus rhamosus , and Lactobacillus casei were 97%, 15%, and 4% greater, respectively, than those under fermentative growth conditions. As a potential preservative, cultures of the four strains of lactic acid bacteria were stored at 4°C with the extracted heme and living lactic acid bacterial cells were counted. There were more L. lactis and L. plantarum live cells when stored with heme, whereas L. rhamosus and L. casei showed no significant differences in live-cell numbers. The potential uses of the heme from C. glutamicum are further discussed.

Additive-dominance genetic model analyses for late-maturity alpha-amylase activity in a bread wheat factorial crossing population.

PubMed

Rasul, Golam; Glover, Karl D; Krishnan, Padmanaban G; Wu, Jixiang; Berzonsky, William A; Ibrahim, Amir M H

2015-12-01

Elevated level of late maturity α-amylase activity (LMAA) can result in low falling number scores, reduced grain quality, and downgrade of wheat (Triticum aestivum L.) class. A mating population was developed by crossing parents with different levels of LMAA. The F2 and F3 hybrids and their parents were evaluated for LMAA, and data were analyzed using the R software package 'qgtools' integrated with an additive-dominance genetic model and a mixed linear model approach. Simulated results showed high testing powers for additive and additive × environment variances, and comparatively low powers for dominance and dominance × environment variances. All variance components and their proportions to the phenotypic variance for the parents and hybrids were significant except for the dominance × environment variance. The estimated narrow-sense heritability and broad-sense heritability for LMAA were 14 and 54%, respectively. High significant negative additive effects for parents suggest that spring wheat cultivars 'Lancer' and 'Chester' can serve as good general combiners, and that 'Kinsman' and 'Seri-82' had negative specific combining ability in some hybrids despite of their own significant positive additive effects, suggesting they can be used as parents to reduce LMAA levels. Seri-82 showed very good general combining ability effect when used as a male parent, indicating the importance of reciprocal effects. High significant negative dominance effects and high-parent heterosis for hybrids demonstrated that the specific hybrid combinations; Chester × Kinsman, 'Lerma52' × Lancer, Lerma52 × 'LoSprout' and 'Janz' × Seri-82 could be generated to produce cultivars with significantly reduced LMAA level.

Polymethylmethacrylate bone cements and additives: A review of the literature

PubMed Central

Arora, Manit; Chan, Edward KS; Gupta, Sunil; Diwan, Ashish D

2013-01-01

Polymethylmethacrylate (PMMA) bone cement technology has progressed from industrial Plexiglass administration in the 1950s to the recent advent of nanoparticle additives. Additives have been trialed to address problems with modern bone cements such as the loosening of prosthesis, high post-operative infection rates, and inflammatory reduction in interface integrity. This review aims to assess current additives used in PMMA bone cements and offer an insight regarding future directions for this biomaterial. Low index (< 15%) vitamin E and low index (< 5 g) antibiotic impregnated additives significantly address infection and inflammatory problems, with only modest reductions in mechanical strength. Chitosan (15% w/w PMMA) and silver (1% w/w PMMA) nanoparticles have strong antibacterial activity with no significant reduction in mechanical strength. Future work on PMMA bone cements should focus on trialing combinations of these additives as this may enhance favourable properties. PMID:23610754

Viscoelastic Properties of Soil with Different Ammonium Nitrate Addition

NASA Astrophysics Data System (ADS)

Kawecka-Radomska, M.; Tomczyńska-Mleko, M.; Muszyńskic, S.; Wesołowska-Trojanowska, M.; Mleko, S.

2017-12-01

Four different soils samples were taken from not cultivated recreational places. Particle-size distribution and pH (in water and in 1 M KCl) of the soil samples were measured. Soil samples were saturated with deionized water and solution of ammonium nitrate with the concentration of 5, 50 or 500 mM for 3 days. The samples were analyzed using dynamic oscillatory rheometer by frequency and strain sweeps. Soil samples were similar to physical gels, as they presented rheological properties between those of a concentrated biopolymer and a true gel. 50 mM concentration of the salt was enough to make changes in the elasticity of the soils. Small concentration of the fertilizer caused weakening of the soil samples structure. Higher concentration of ammonium nitrate caused the increase in the moduli crossover strain value. For the loam sample taken from a playground, with the highest content of the particles <0.002 mm (clay aluminosilicates), the lowest value of strain was observed at the moduli intersection. Lower strain value was necessary for the sliding shear effect of soil A sample effecting transgression to the "flowing" state. Strain sweep moduli crossover point can be used as a determinant of the rheological properties of soil.

Biochar Addition Increases the Rates of Dissimilatory Iron Reduction and Methanogenesis in Ferrihydrite Enrichments

PubMed Central

Zhou, Guo-Wei; Yang, Xiao-Ru; Marshall, Christopher W.; Li, Hu; Zheng, Bang-Xiao; Yan, Yu; Su, Jian-Qiang; Zhu, Yong-Guan

2017-01-01

Biochar contains quinones and aromatic structures that facilitate extracellular electron transfer between microbial cells and insoluble minerals. In this study, granulated biochar (1.2–2 mm) and powdered biochar (<0.15 mm) were amended to two ferrihydrite (in situ ferrihydrite and ex situ ferrihydrite) enrichments to investigate the effect of biochar with different particle sizes on dissimilatory iron(III)-reducing bacteria (DIRB) and methanogens. Biochar addition significantly stimulated the reduction of both in situ ferrihydrite and ex situ ferrihydrite and the production of methane. Powdered biochar amendments increased iron reduction compared to granulated biochar amendment in both the in situ ferrihydrite and ex situ ferrihydrite enrichments. However, no significant difference was observed in methane production between the powdered biochar and granulated biochar amendments in the two ferrihydrite enrichments. Analysis of 16S rRNA gene sequences showed that both DIRB and methanogens were enriched after biochar amendments in the in situ ferrihydrite and ex situ ferrihydrite enrichments. Taxa belonging to the Geobacteraceae and methanogenic genus affiliated to Methanosarcina were detected with significantly higher relative abundances in powdered biochar amendments than those in granulated biochar amendments in both the ferrihydrite enrichments. X-ray diffraction analysis indicated green rust [Fe2(CO3) (OH)] and vivianite [Fe3(PO4)2 8(H2O)] formed in the ex situ ferrihydrite and in situ ferrihydrite enrichments without biochar addition, respectively. After granulated biochar amendment, the mineral phase changed from the green rust to vivianite in the ex situ ferrihydrite enrichment, while crystalline vivianite and iron oxide (γ-Fe2O3) were detected simultaneously in the in situ ferrihydrite enrichment. No crystalline iron compound was found in the powdered biochar amendments in both ferrihydrite enrichments. Overall, our study illustrated that the addition of

Diplomatic Solutions to Additive Challenges

DTIC Science & Technology

Additive manufacturing (AM) technology, colloquially known as 3D printing , will bring significant benefits to society, but also poses great risks...regimes, are not sufficient to address the challenges presented by 3D printing technology. The DOS should evaluate and promote unconventional strategies...from printed weapons proliferation. Working with other nations to resolve the appropriate balance between development and security, and to promote norms

Spectral-domain Optical Coherence Tomography in Manifest Glaucoma: Its Additive Role in Structural Diagnosis.

PubMed

Kim, Ko Eun; Oh, Sohee; Jeoung, Jin Wook; Suh, Min Hee; Seo, Je Hyun; Kim, Martha; Park, Ki Ho; Kim, Dong Myung; Kim, Seok Hwan

2016-11-01

To investigate the additive role of spectral-domain optical coherence tomography (SDOCT) in the structural diagnosis in glaucoma. Reliability and validity analysis. Structural examinations from 109 eyes of 109 healthy individuals and 151 eyes of 151 glaucoma patients with different severities were included. Four structural-diagnostic examination sets were prepared using stereo-optic disc photography (SDP), red-free retinal nerve fiber layer photography (RNFLP), and SDOCT: (1) SDP (S), (2) SDP and SDOCT (SO), (3) SDP and RNFLP (SR), and (4) SDP, RNFLP, and SDOCT (SRO). Five glaucoma specialists were instructed to classify subjects as normal or glaucoma using each of the 4 diagnostic sets in the order S, SO, SR, and SRO, with a 1-month interval. The interobserver agreement was evaluated using kappa (κ) statistics. The additive effect of SDOCT on the diagnostic performance of the specialists was evaluated using the generalized estimating equation. Five glaucoma specialists showed an excellent level of interobserver agreement on the diagnostic assessments based on the 4 sets. In the comparison of the collective diagnostic performance of the specialists, addition of SDOCT to SDP showed an approximately 2-fold significant increase in the diagnostic accuracy. Adding SDOCT to SDP significantly enhanced the specialists' structural-diagnostic ability with respect to the moderate glaucoma, though not mild or advanced glaucoma. SDOCT significantly enhanced the diagnostic accuracy of the glaucoma specialists' performance, showing its additive diagnostic value in judging glaucomatous structural damage, especially in the moderate stage of glaucoma. Copyright © 2016 Elsevier Inc. All rights reserved.

[Assessment of the effect of selected mixture of food additives on the protein metabolism--model studies].

PubMed

Friedrich, Mariola; Kuchlewska, Magdalena

2012-01-01

Contemporarily, food production without food additives is very rare. Increasingly often, however, scientific works report on adverse effects of specified, single food additives on the body. Data is, in turn, lacking on the synergistic effect of a mixture of different food additives on body functions and its main metabolic pathways. The objective of this study, an animal model, was to evaluate if and in what way the compound of chosen and most frequently used and consumed food additives, along with the change of diet composition to processed, purified, influence the selected markers of protein metabolism. The animals were divided into four groups, which were fed with compound of feed pellets: group I and II with basic compound, group III and IV with modified compound in which part of the full grain was replaced by isocalorie wheat flour type 500 and saccharose. Animals from groups I and III received tap water, which was standing for some time, to drink. Animals from groups II and IV received solution of chosen additives to food and next they were given water to drink. The amount of given food additives was evaluated by taking into consideration their consumption by people recalculated to 1 kg of their body mass. The experiment spanned for 7 weeks. It was ascertained that the applied additives caused significant changes in total protein concentration and its fractions: albumin, alpha1-globulin, alpha2-globulin, beta-globulin and gamma-globulin in the blood serum of the animals under research, which can indicate and contribute to disclosure of creation of undesirable food reaction, especially when recommended levels of consumption of those additives are being exceeded. The organism response to the applied additives and accompanying it change of diet was essentially connected to sex of the animals. Undesirable character of changes taking place under the influence of applied additives, was observed both in animals fed with basic feed and modified feed with various

Objective measurements of the penile angulation are significantly different than self-estimated magnitude among patients with penile curvature.

PubMed

Liguori, Giovanni; Salonia, Andrea; Garaffa, Giulio; Chiriacò, Giovanni; Pavan, Nicola; Cavallini, Giorgio; Trombetta, Carlo

2018-01-01

The study was aimed to assess the presence of actual differences between the objective and the perceived magnitude of a curvature between patients affected by Peyronie's disease (PD) and congenital penile curvature (CPC). Wee analysed a cohort of 88 consecutive patients seeking medical help for either CPC or PD. All patients were invited to provide a self-made drawing of their penis in erection in order to obtain self-provided description of the deformity. An objective measurement of the deformity was also performed drawing two intersecting lines through the center of the distal and proximal straight section of the penile shaft. Our findings showed significant differences between patient self-estimation and the objective measurements of the penile angulation performed by trained experts, with only 32% of patients correctly assessing their own curvature. Overall, patients tended to overestimate (56%) their degree of curvature, but the results are different in patients with PD than those with CPC. In the 60 men (68%) who did not accurately assess their curvature, PD patients generally overestimated their curvature versus CPC patients (67% vs 16%). On the contrary CPC patients underestimated their curvature compared to PD (42% vs. 4%). In order to improve patients' satisfaction rates, the surgeon needs to take into consideration the patient's perception of the deformity when planning the type of surgical correction. Copyright® by the International Brazilian Journal of Urology.

[Application of SAS macro to evaluated multiplicative and additive interaction in logistic and Cox regression in clinical practices].

PubMed

Nie, Z Q; Ou, Y Q; Zhuang, J; Qu, Y J; Mai, J Z; Chen, J M; Liu, X Q

2016-05-01

Conditional logistic regression analysis and unconditional logistic regression analysis are commonly used in case control study, but Cox proportional hazard model is often used in survival data analysis. Most literature only refer to main effect model, however, generalized linear model differs from general linear model, and the interaction was composed of multiplicative interaction and additive interaction. The former is only statistical significant, but the latter has biological significance. In this paper, macros was written by using SAS 9.4 and the contrast ratio, attributable proportion due to interaction and synergy index were calculated while calculating the items of logistic and Cox regression interactions, and the confidence intervals of Wald, delta and profile likelihood were used to evaluate additive interaction for the reference in big data analysis in clinical epidemiology and in analysis of genetic multiplicative and additive interactions.

Seasonal Patterns of Soil Respiration and Related Soil Biochemical Properties under Nitrogen Addition in Winter Wheat Field.

PubMed

Liang, Guopeng; Houssou, Albert A; Wu, Huijun; Cai, Dianxiong; Wu, Xueping; Gao, Lili; Li, Jing; Wang, Bisheng; Li, Shengping

2015-01-01

Understanding the changes of soil respiration under increasing N fertilizer in cropland ecosystems is crucial to accurately predicting global warming. This study explored seasonal variations of soil respiration and its controlling biochemical properties under a gradient of Nitrogen addition during two consecutive winter wheat growing seasons (2013-2015). N was applied at four different levels: 0, 120, 180 and 240 kg N ha(-1) year(-1) (denoted as N0, N12, N18 and N24, respectively). Soil respiration exhibited significant seasonal variation and was significantly affected by soil temperature with Q10 ranging from 2.04 to 2.46 and from 1.49 to 1.53 during 2013-2014 and 2014-2015 winter wheat growing season, respectively. Soil moisture had no significant effect on soil respiration during 2013-2014 winter wheat growing season but showed a significant and negative correlation with soil respiration during 2014-2015 winter wheat growing season. Soil respiration under N24 treatment was significantly higher than N0 treatment. Averaged over the two growing seasons, N12, N18 and N24 significantly increased soil respiration by 13.4, 16.4 and 25.4% compared with N0, respectively. N addition also significantly increased easily extractable glomalin-related soil protein (EEG), soil organic carbon (SOC), total N, ammonium N and nitrate N contents. In addition, soil respiration was significantly and positively correlated with β-glucosidase activity, EEG, SOC, total N, ammonium N and nitrate N contents. The results indicated that high N fertilization improved soil chemical properties, but significantly increased soil respiration.

Leaf nitrogen assimilation and partitioning differ among subtropical forest plants in response to canopy addition of nitrogen treatments.

PubMed

Liu, Nan; Wu, Shuhua; Guo, Qinfeng; Wang, Jiaxin; Cao, Ce; Wang, Jun

2018-05-12

Global increases in nitrogen deposition may alter forest structure and function by interfering with plant nitrogen metabolism (e.g., assimilation and partitioning) and subsequent carbon assimilation, but it is unclear how these responses to nitrogen deposition differ among species. In this study, we conducted a 2-year experiment to investigate the effects of canopy addition of nitrogen (CAN) on leaf nitrogen assimilation and partitioning in three subtropical forest plants (Castanea henryi, Ardisia quinquegona, and Blastus cochinchinensis). We hypothesized that responses of leaf nitrogen assimilation and partitioning to CAN differ among subtropical forest plants. CAN increased leaf nitrate reductase (NR) activity, and leaf nitrogen and chlorophyll contents but reduced leaf maximum photosynthetic rate (A max ), photosynthetic nitrogen use efficiency (PNUE), ribulose-1,5-bisphosphate carboxylase (Rubisco) activity, and metabolic protein content of an overstory tree species C. henryi. In an understory tree A. quinquegona, CAN increased NR activity and glutamine synthetase activity and therefore increased metabolic protein synthesis (e.g., Rubisco) in leaves. In the shrub B. cochinchinensis, CAN increased A max , PNUE, Rubisco content, metabolic protein content, and Rubisco activity in leaves. Leaf nitrogen assimilation and partitioning results indicated that A. quinquegona and B. cochinchinensis may better acclimate to CAN than C. henryi and that the acclimation mechanism differs among the species. Results from this study suggest that long-term elevated atmospheric nitrogen deposition has contributed to the ongoing transformation of subtropical forests into communities dominated by small trees and shrubs. Copyright © 2018 Elsevier B.V. All rights reserved.

Discrepant responses of methane emissions to additions with different organic compound classes of rice straw in paddy soil.

PubMed

Tan, Wenbing; Yu, Hanxia; Huang, Caihong; Li, Dan; Zhang, Hui; Jia, Yufu; Wang, Guoan; Xi, Beidou

2018-07-15

Crop straw incorporation has become a prevailing agricultural practice that guarantees the food production and security. There is a significant body of work on the effects of straw incorporation on the methane (CH 4 ) emissions in paddy fields. However, it is unclear whether there are diverse links between CH 4 emission dynamics and incorporations of different organic compound classes of straw to paddy fields. In this study, soil incubations were conducted to assess the respective effect of incorporations of hydrolysable amino acid (HAA), dilute-acid extractable carbohydrate (DAC), lipid and acid-insoluble organic matter (AIOM) fractions of rice straw on the CH 4 emission in paddy soil. It is revealed that incorporations of HAA and DAC fractions exert the greatest intensities to stimulate the CH 4 emissions, which mainly takes place in the early period of incubation; on contrary, the incorporation of lipid fraction exerts the lowest intensity and mainly takes place in the late period. The pattern of CH 4 emission after incorporation of AIOM fraction occurs peaks both in the early and late periods of incubation. Our findings highlight that the time of occurrence and intensity of effects of rice straw incorporation on CH 4 emissions vary significantly depending on the different organic compound classes of rice straw, which may be key to proposing a promising management strategy for mitigating CH 4 emissions in paddy fields in the context of straw incorporation. Copyright © 2018 Elsevier B.V. All rights reserved.

Antiwear Additive Mechanisms in Sliding Contacts

NASA Technical Reports Server (NTRS)

Baldwin, B. A.

1984-01-01

The possible mechanisms associated with wear in a sliding contact and how an oil and antiwear additive can mitigate wear or prevent catastropic seizure of the contacting parts was examined. The various load and temperature regimes are examined and the mechanisms which are predominant under these conditions are determined. The critical mechanism(s) depend on the test parameters, particularly load and temperature, although sliding speed is also a factor. Different ways to improve the efficiency of antiwear additives are suggested.

Effect of a phytogenic feed additive on the susceptibility of Onchorhynchus mykiss to Aeromonas salmonicida.

PubMed

Menanteau-Ledouble, S; Krauss, I; Santos, G; Fibi, S; Weber, B; El-Matbouli, M

2015-06-29

In recent years, feed additives have increasingly been adopted by the aquaculture industry. These supplements not only offer an alternative to antibiotics but have also been linked to enhanced growth performance. However, the literature is still limited and provides contradictory information on their effectiveness. This is mainly due to the wide variety of available products and their complex mechanisms of action. Phytogenic feed additives have been shown to have antimicrobial effects and can improve growth performance. In the present study, we investigated the susceptibility of several fish pathogenic bacteria to a phytogenic essential oil product in vitro. In addition, we determined the protective effect of a commercial phytogenic feed additive containing oregano, anis and citrus oils on the resistance of rainbow trout Oncorhynchus mykiss to infection by Aeromonas salmonicida. The bacterium was administered through 3 different routes: intra-peritoneal injection, immersion in a bacterial solution and cohabitation with infected fish. Mortality rates were significantly lower in infected rainbow trout that had received the feed additive: the overall mortality rate across all routes of infection was 18% in fish fed a diet containing the additive compared to 37% in fish that received unsupplemented feed. The route of infection also significantly impacted mortality, with average mortality rates of 60, 17.5 and 5% for intra-peritoneal injection, immersion and cohabitation, respectively. In general, fish were better protected against infection by immersion than infection by injection.

Impacts of water and nitrogen addition on nitrogen recovery in Haloxylon ammodendron dominated desert ecosystems.

PubMed

Cui, Xiaoqing; Yue, Ping; Gong, Yanming; Li, Kaihui; Tan, Dunyan; Goulding, Keith; Liu, Xuejun

2017-12-01

Desert ecosystems are likely to change in response to global climate change and nitrogen (N) deposition. The effects of increased precipitation and N deposition on plant growth and the N cycle largely depend on N allocation and N recovery efficiency in the plant-soil ecosystem, but there is limited research on this in desert ecosystems. Here we report results using double-labeled 15 NH 4 15 NO 3 (30 and 60kgNha -1 yr -1 ) as a tracer under ambient (no additional water addition) and enhanced precipitation (60mm water addition) in a Haloxylon ammodendron dominated ecosystem in the Gurbantunggut Desert of Northwest China. Herbaceous plants were a significantly larger sink for added 15 N than the H. ammodendron trees, and N retention varied with water and N addition, relative to growing season precipitation. The retention of added 15 N varied within the components of H. ammodendron, with the stems retaining most, followed by the assimilation branches. Soil was the dominant sink for added 15 N, in which the topsoil and subsoil respond differently to water and N addition over the two-year period. Nitrogen relative recovery percentage in the whole ecosystem ranged from 43% to 61%, lower than average recovery rate in temperate forests; N tracer recovery percentage significantly increased with water addition but decreased with enhanced N deposition. Future N cycling in central Asian deserts will depend on changes in precipitation. Copyright © 2017 Elsevier B.V. All rights reserved.

Evaluation of Additively Manufactured Metals for Use in Oxygen Systems Project

NASA Technical Reports Server (NTRS)

Tylka, Jonathan; Cooper, Ken; Peralta, Stephen; Wilcutt, Terrence; Hughitt, Brian; Generazio, Edward

2016-01-01

Space Launch System, Commercial Resupply, and Commercial Crew programs have published intent to use additively manufactured (AM) components in propulsion systems and are likely to include various life support systems in the future. Parts produced by these types of additive manufacturing techniques have not been fully evaluated for use in oxygen systems and the inherent risks have not been fully identified. Some areas of primary concern in the SLS process with respect to oxygen compatibility may be the porosity of the printed parts, fundamental differences in microstructure of an AM part as compared to traditional materials, or increased risk of shed metal particulate into an oxygen system. If an ignition were to occur the printed material could be more flammable than components manufactured from a traditional billet of raw material and/or present a significant hazards if not identified and rigorously studied in advance of implementation into an oxygen system.

Salivary Concentration of Progesterone and Cortisol Significantly Differs Across Individuals After Correcting for Blood Hormone Values

PubMed Central

Konishi, Shoko; Brindle, Eleanor; Guyton, Amanda; O’Connor, Kathleen A.

2014-01-01

Between-individual variation of salivary progesterone (P4) and cortisol levels does not always closely reflect blood hormone concentrations. This may be partly a function of individual differences in salivary hormone excretion. We tested whether time of day at sampling and ethnicity contributed to individual variation in salivary hormones after adjusting for blood hormone levels. Forty-three Caucasian and 15 Japanese women (18–34 years) collected four sets of matched dried blood spot (DBS) and saliva specimens across a menstrual cycle (N = 232 specimen sets). Linear fixed-effects (LFE) models were used to estimate the effects of diurnal variation and ethnicity on salivary P4 and cortisol while adjusting for DBS levels. For each hormone, women with exclusively positive or negative residuals (unexplained variance) from the LFE models were categorized as high- or low-saliva-to-DBS hormone ratio (SDR; high or low salivary secretors), respectively. We found that salivary P4 (P < 0.05) was significantly higher in early morning compared to the afternoon, after controlling for DBS levels, ethnicity, and BMI. After further adjusting for this diurnal effect, significant individual variation in salivary P4 and cortisol remained: sixteen and nine women, respectively were categorized as low or high salivary secretors for both hormones (P < 0.001), suggesting systematic individual-specific variation of salivary hormonal concentration. We conclude that when saliva is used to quantify P4 or cortisol levels, time of day at sampling should be controlled. Even with this adjustment, salivary P4 and cortisol do not closely mirror between-individual variation of serum P4 and cortisol in a substantial proportion of individuals. PMID:22826025

TiO2-Nanofillers Effects on Some Properties of Highly- Impact Resin Using Different Processing Techniques.

PubMed

Aziz, Hawraa Khalid

2018-01-01

The criteria of conventional curing of polymethyl methacrylate do not match the standard properties of the denture base materials. This research was conducted to investigate the addition of TiO 2 nano practical on impact strength, thermal conductivity and color stability of acrylic resin cured by microwave in comparison to the conventional cured of heat-polymerized acrylic resin. 120 specimens made of high impact acrylic resin were divided into two main groups according to the type of curing (water bath, microwave), then each group was subdivided into two groups according to the addition of 3% TiO 2 nano-fillers and control group (without the addition of TiO 2 0%). Each group was subdivided according to the type of test into 3 groups with 10 specimens for each group. Data were statistically analyzed using Student t-test to detect the significant differences between tested and control groups at significance level ( P <0.05). According to curing type methods, the results showed that there was a significant decrease in impact strength of microwaved cured resin, but there was no significant difference in the thermal conductivity and color stability of resin. In addition, by using nanofiller, there was a significant increase in the impact strength and color stability with the addition of 3% TiO 2 nanofillers, but no significant difference was found in the thermal conductivity of the acrylic resin. The microwave curing of acrylic resin had no change in the color stability and thermal conductivity in comparison to the water bath, but the impact strength was decreased. The addition of 3% TiO 2 improved the impact and the color stability, but the thermal conductivity did not change.

"Clinical" Significance: "Clinical" Significance and "Practical" Significance are NOT the Same Things

ERIC Educational Resources Information Center

Peterson, Lisa S.

2008-01-01

Clinical significance is an important concept in research, particularly in education and the social sciences. The present article first compares clinical significance to other measures of "significance" in statistics. The major methods used to determine clinical significance are explained and the strengths and weaknesses of clinical significance…

The significance of intrauterine growth restriction is different from prematurity for the outcome of infants with gastroschisis.

PubMed

Puligandla, Pramod S; Janvier, Annie; Flageole, Hélène; Bouchard, Sarah; Mok, Elise; Laberge, Jean-Martin

2004-08-01

Recent reviews of gastroschisis identify prematurity and low birth weight as predictors of morbidity and mortality. The authors compared the outcomes of intrauterine growth-restricted infants (IUGR) with gastroschisis to those without growth restriction because IUGR is different from prematurity. A retrospective analysis was performed for infants born with gastroschisis between 1990 and 2000 at 2 pediatric hospitals. Patients were segregated into 3 groups based on birth weight corrected for gestational age: group 1 (IUGR, 25th percentile). Patient demographics, method of closure, number of surgeries, presence of atresia, and time to full enteral feedings (FPO days) were assessed. Mortality rate, length of stay (LOS), and readmission rates were also compared. Analysis of variance (ANOVA)/Student's t test and Fisher's. Exact tests were used for statistical analysis (P <.05 significant). Regression analysis was also performed. One hundred thirteen patients were included (group 1 = 17; group 2 = 43; group 3 = 53). Overall, infants with IUGR had similar outcomes to non-IUGR infants, including FPO and total parenteral nutrition (TPN) days, LOS, readmission, and mortality rates. The method of closure did not affect outcome. Infants with atresia had significantly increased times to full feeding (95 v 34 days; P =.034), more surgeries (2.7 v 1.4; P =.002), and longer LOS (106 v 48 days; P =.011). Infants born at less than 37 weeks' gestation had significantly increased fasting (NPO) days (28 v 18 days; P =.005) and longer LOS (65 v 37 days; P =.006) when compared with infants born at greater than 37 weeks. Logistic regression analysis identified the presence of atresia as an independent risk factor for gastrointestinal dysfunction and the need for prolonged TPN. Prematurity also adversely affected these same parameters, although it did not reach statistical significance. Although infants with

Making lasting memories: Remembering the significant

PubMed Central

McGaugh, James L.

2013-01-01

Although forgetting is the common fate of most of our experiences, much evidence indicates that emotional arousal enhances the storage of memories, thus serving to create, selectively, lasting memories of our more important experiences. The neurobiological systems mediating emotional arousal and memory are very closely linked. The adrenal stress hormones epinephrine and corticosterone released by emotional arousal regulate the consolidation of long-term memory. The amygdala plays a critical role in mediating these stress hormone influences. The release of norepinephrine in the amygdala and the activation of noradrenergic receptors are essential for stress hormone-induced memory enhancement. The findings of both animal and human studies provide compelling evidence that stress-induced activation of the amygdala and its interactions with other brain regions involved in processing memory play a critical role in ensuring that emotionally significant experiences are well-remembered. Recent research has determined that some human subjects have highly superior autobiographic memory of their daily experiences and that there are structural differences in the brains of these subjects compared with the brains of subjects who do not have such memory. Understanding of neurobiological bases of such exceptional memory may provide additional insights into the processes underlying the selectivity of memory. PMID:23754441

Enhancing CBT for Chronic Insomnia: A Randomised Clinical Trial of Additive Components of Mindfulness or Cognitive Therapy.

PubMed

Wong, Mei Yin; Ree, Melissa J; Lee, Christopher W

2016-09-01

Although cognitive behavioural therapy (CBT) for insomnia has resulted in significant reductions in symptoms, most patients are not classified as good sleepers after treatment. The present study investigated whether additional sessions of cognitive therapy (CT) or mindfulness-based therapy (MBT) could enhance CBT in 64 participants with primary insomnia. All participants were given four sessions of standard CBT as previous research had identified this number of sessions as an optimal balance between therapist guidance and patient independence. Participants were then allocated to further active treatment (four sessions of CT or MBT) or a no further treatment control. The additional treatments resulted in significant improvements beyond CBT on self-report and objective measures of sleep and were well tolerated as evidenced by no dropouts from either treatment. The effect sizes for each of these additional treatments were large and clinically significant. The mean scores on the primary outcome measure, the Insomnia Severity Index, were 5.74 for CT and 6.69 for MBT, which are within the good-sleeper range. Treatment effects were maintained at follow-up. There were no significant differences between CT and MBT on any outcome measure. These results provide encouraging data on how to enhance CBT for treatment of insomnia. Copyright © 2015 John Wiley & Sons, Ltd. CBT treatments for insomnia can be enhanced using recent developments in cognitive therapy. CBT treatments for insomnia can be enhanced using mindfulness-based treatments. Both cognitive therapy and mindfulness produce additional clinically significant change. Copyright © 2015 John Wiley & Sons, Ltd.

Lipolysis and lipid oxidation in fermented sausages depending on different processing conditions and different antioxidants.

PubMed

Zanardi, Emanuela; Ghidini, Sergio; Battaglia, Alessandra; Chizzolini, Roberto

2004-02-01

Lipolysis and lipid oxidation in Mediterranean and North Europe type sausages were studied in relation to raw material, processing conditions and additives. In particular the effect of ascorbic acid, nitrites and spices was evaluated. Lipolysis was measured by the determination of total and free fatty acids of fresh minces and matured products and lipid oxidation was evaluated by thiobarbituric acid reactive substances and cholesterol oxidation products. The increase of free fatty acids during maturation appears to be independent from processing conditions and the differences in polyunsaturated fatty acids increment found among the formulations appear to be due to inherent variations of raw materials. The presence of ascorbic acid and/or nitrite seems important for cholesterol protection and, as a consequence, for the safety of fermented meat products while spices at doses up to 0.1% do not seem to have a remarkable effect. The effect on fatty acid oxidation of the same additives and of the different processing technologies is not significantly different and the variations linked to raw material may play the greatest role.

Usefulness of addition of Orvus ES paste and sodium lauryl sulfate to frozen feline semen.

PubMed

Mizutani, Tatsuji; Sumigama, Shiho; Nagakubo, Keiichi; Shimizu, Noriko; Oba, Hiromichi; Hori, Tatsuya; Tsutsui, Toshihiko

2010-01-01

It has been shown that addition of the surfactant Orvus ES paste (OEP) and its main component sodium lauryl sulfate (SLS) to boar or dog semen before freezing improves post-thaw sperm motility and protects acrosome caps. In this study, we investigated the usefulness of the addition of OEP (0, 1, 2 and 4%) or SLS (0, 1, 2, 3 and 4 mg/ml) to cat ejaculates before freezing and their concentrations. Among the OEP addition groups, the 1% OEP group showed higher sperm motility than the other groups. Among the SLS addition groups, the 3 mg/ml SLS group showed slightly higher sperm motility and viability than the other groups. Comparison between the 1% OEP and 3 mg/ml SLS addition groups suggested a higher percentage of sperm with an acrosome cap in the 1% OEP group. The other sperm properties did not significantly differ between the 2 groups. These results indicate that addition of 1% OEP or 3 mg/ml SLS is effective for freezing of cat ejaculated semen.

Food additives

PubMed Central

Spencer, Michael

1974-01-01

Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

Evaluation of soil carbon pools after the addition of prunings in subtropical orchards placed in terraces

NASA Astrophysics Data System (ADS)

Márquez San Emeterio, Layla; Martín Reyes, Marino Pedro; Ortiz Bernad, Irene; Fernández Ondoño, Emilia; Sierra Aragón, Manuel

2017-04-01

The amount of carbon that can be stored in a soil depends on many factors, such as the type of soil, the chemical composition of plant rests and the climate, and is also highly affected by land use and soil management. Agricultural ecosystems are proved to absorb a large amount of CO2 from the atmosphere through several sustainable management practices. In addition, organic materials such as leaves, grass, prunings, etc., comprise a significant type of agricultural practices as a result of waste recycling. The aim of this research was to evaluate the effects of the addition of different organic prunings on the potential for carbon sequestration in agricultural soils placed in terraces. Three subtropical orchards were sampled in Almuñécar (Granada, S Spain): mango (Mangifera indica L.), avocado (Persea americana Mill.) and cherimoya (Annonacherimola Mill.). The predominant climate is Subtropical Mediterranean and the soil is an Eutric Anthrosol. The experimental design consisted in the application of prunings from avocado, cherimoya and mango trees, placed on the surface soil underneath their correspondent trees, as well as garden prunings from the green areas surrounding the town center on the surface soils under the three orchard trees. Control experiences without the addition of prunings were also evaluated. These experiences were followed for three years. Soil samples were taken at4 cm depth. They were dried for 3-4 days and then sieved (<2 mm).Total soil organic C, water-soluble soil organic C, mineral-associated organic C and non-oxidable C were analyzed and expressed as carbon pools (Mg C ha-1for total soil organic C, or Kg C ha-1for the others). The results showed an increase of all organic carbon pools in all pruning treatments compared to the control experiences. Differences in total organic carbon pool were statistically significant between soils under avocado prunings and their control soil, and between soils under garden prunings with cherimoya and

Physical and genetic-interaction density reveals functional organization and informs significance cutoffs in genome-wide screens

PubMed Central

Dittmar, John C.; Pierce, Steven; Rothstein, Rodney; Reid, Robert J. D.

2013-01-01

Genome-wide experiments often measure quantitative differences between treated and untreated cells to identify affected strains. For these studies, statistical models are typically used to determine significance cutoffs. We developed a method termed “CLIK” (Cutoff Linked to Interaction Knowledge) that overlays biological knowledge from the interactome on screen results to derive a cutoff. The method takes advantage of the fact that groups of functionally related interacting genes often respond similarly to experimental conditions and, thus, cluster in a ranked list of screen results. We applied CLIK analysis to five screens of the yeast gene disruption library and found that it defined a significance cutoff that differed from traditional statistics. Importantly, verification experiments revealed that the CLIK cutoff correlated with the position in the rank order where the rate of true positives drops off significantly. In addition, the gene sets defined by CLIK analysis often provide further biological perspectives. For example, applying CLIK analysis retrospectively to a screen for cisplatin sensitivity allowed us to identify the importance of the Hrq1 helicase in DNA crosslink repair. Furthermore, we demonstrate the utility of CLIK to determine optimal treatment conditions by analyzing genome-wide screens at multiple rapamycin concentrations. We show that CLIK is an extremely useful tool for evaluating screen quality, determining screen cutoffs, and comparing results between screens. Furthermore, because CLIK uses previously annotated interaction data to determine biologically informed cutoffs, it provides additional insights into screen results, which supplement traditional statistical approaches. PMID:23589890

Advanced Material Strategies for Next-Generation Additive Manufacturing

PubMed Central

Chang, Jinke; He, Jiankang; Zhou, Wenxing; Lei, Qi; Li, Xiao; Li, Dichen

2018-01-01

Additive manufacturing (AM) has drawn tremendous attention in various fields. In recent years, great efforts have been made to develop novel additive manufacturing processes such as micro-/nano-scale 3D printing, bioprinting, and 4D printing for the fabrication of complex 3D structures with high resolution, living components, and multimaterials. The development of advanced functional materials is important for the implementation of these novel additive manufacturing processes. Here, a state-of-the-art review on advanced material strategies for novel additive manufacturing processes is provided, mainly including conductive materials, biomaterials, and smart materials. The advantages, limitations, and future perspectives of these materials for additive manufacturing are discussed. It is believed that the innovations of material strategies in parallel with the evolution of additive manufacturing processes will provide numerous possibilities for the fabrication of complex smart constructs with multiple functions, which will significantly widen the application fields of next-generation additive manufacturing. PMID:29361754

Advanced Material Strategies for Next-Generation Additive Manufacturing.

PubMed

Chang, Jinke; He, Jiankang; Mao, Mao; Zhou, Wenxing; Lei, Qi; Li, Xiao; Li, Dichen; Chua, Chee-Kai; Zhao, Xin

2018-01-22

Additive manufacturing (AM) has drawn tremendous attention in various fields. In recent years, great efforts have been made to develop novel additive manufacturing processes such as micro-/nano-scale 3D printing, bioprinting, and 4D printing for the fabrication of complex 3D structures with high resolution, living components, and multimaterials. The development of advanced functional materials is important for the implementation of these novel additive manufacturing processes. Here, a state-of-the-art review on advanced material strategies for novel additive manufacturing processes is provided, mainly including conductive materials, biomaterials, and smart materials. The advantages, limitations, and future perspectives of these materials for additive manufacturing are discussed. It is believed that the innovations of material strategies in parallel with the evolution of additive manufacturing processes will provide numerous possibilities for the fabrication of complex smart constructs with multiple functions, which will significantly widen the application fields of next-generation additive manufacturing.

The addition of albumin improves Schwann cells viability in nerve cryopreservation.

PubMed

González Porto, Sara Alicia; Domenech, Nieves; González Rodríguez, Alba; Avellaneda Oviedo, Edgar Mauricio; Blanco, Francisco J; Arufe Gonda, María C; Álvarez Jorge, Ángel; Sánchez Ibañez, Jacinto; Rendal Vázquez, Esther

2018-04-26

The purpose of the current study was to establish a valid protocol for nerve cryopreservation, and to evaluate if the addition of albumin supposed any advantage in the procedure. We compared a traditional cryopreservation method that uses dimethyl sulfoxide (DMSO) as cryoprotectant, to an alternative method that uses DMSO and albumin. Six Wistar Lewis rats were used to obtain twelve 20 mm fragments of sciatic nerve. In the first group, six fragments were cryopreserved in 199 media with 10% DMSO, with a temperature decreasing rate of 1 °C per minute. In the second group, six fragments were cryopreserved adding 4% human albumin. The unfreezing process consisted of sequential washings with saline in the first group, and saline and 20% albumin in the second group at 37 °C until the crioprotectant was removed. Structural evaluation was performed through histological analysis and electronic microscopy. The viability was assessed with the calcein-AM (CAM) and 4',6-diamino-2-fenilindol (DAPI) staining. Histological results showed a correct preservation of peripheral nerve architecture and no significant differences were found between the two groups. However, Schwann cells viability showed in the CAM-DAPI staining was significantly superior in the albumin group. The viability of Schwann cells was significantly increased when albumin was added to the nerve cryopreservation protocol. However, no significant structural differences were found between groups. Further studies need to be performed to assess the cryopreserved nerve functionality using this new method.

Fruit quality and olive leaf and stone addition affect Picual virgin olive oil triterpenic content.

PubMed

Allouche, Yosra; Uceda, Marino; Jiménez, Antonio; Aguilera, M Paz; Gaforio, José Juan; Beltrán, Gabriel

2009-10-14

The present research aimed to evaluate whether Picual virgin olive oil triterpenic compounds are affected by the addition of variable quantities of stones and leaves before processing or by fruit resting on the ground during 3 months. Results showed that stone addition did not influence triterpenic dialcohol content (uvaol and erythrodiol), whereas triterpenic acids (oleanolic and maslinic) increased significantly when 20 and 30% stones were added. Leaves added at 2% increased significantly oleanolic acid, maslinic acid, and erythrodiol content by 83, 41, and 36%, respectively. During fruit resting on the ground, olive oils showed no differences in uvaol content, a slight increase in erythrodiol, and a gradual increase in both oleanolic and maslinic acids, obtaining at the end of the experiment contents nearly 10- and 3-fold higher than control oils. These results confirm that olive oil triterpenic composition is modified by the factors analyzed.

Significant obesity-associated gene expression changes occur in the stomach but not intestines in obese mice.

PubMed

Chen, Jing; Chen, Lihong; Sanseau, Philippe; Freudenberg, Johannes M; Rajpal, Deepak K

2016-05-01

The gastrointestinal (GI) tract can have significant impact on the regulation of the whole-body metabolism and may contribute to the development of obesity and diabetes. To systemically elucidate the role of the GI tract in obesity, we performed a transcriptomic analysis in different parts of the GI tract of two obese mouse models: ob/ob and high-fat diet (HFD) fed mice. Compared to their lean controls, significant changes in the gene expression were observed in both obese mouse groups in the stomach (ob/ob: 959; HFD: 542). In addition, these changes were quantitatively much higher than in the intestine. Despite the difference in genetic background, the two mouse models shared 296 similar gene expression changes in the stomach. Among those genes, some had known associations to obesity, diabetes, and insulin resistance. In addition, the gene expression profiles strongly suggested an increased gastric acid secretion in both obese mouse models, probably through an activation of the gastrin pathway. In conclusion, our data reveal a previously unknown dominant connection between the stomach and obesity in murine models extensively used in research. © 2016 The Authors. Physiological Reports published by Wiley Periodicals, Inc. on behalf of the American Physiological Society and The Physiological Society.

Training auscultatory skills: computer simulated heart sounds or additional bedside training? A randomized trial on third-year medical students

PubMed Central

2010-01-01

Background The present study compares the value of additional use of computer simulated heart sounds, to conventional bedside auscultation training, on the cardiac auscultation skills of 3rd year medical students at Oslo University Medical School. Methods In addition to their usual curriculum courses, groups of seven students each were randomized to receive four hours of additional auscultation training either employing a computer simulator system or adding on more conventional bedside training. Cardiac auscultation skills were afterwards tested using live patients. Each student gave a written description of the auscultation findings in four selected patients, and was rewarded from 0-10 points for each patient. Differences between the two study groups were evaluated using student's t-test. Results At the auscultation test no significant difference in mean score was found between the students who had used additional computer based sound simulation compared to additional bedside training. Conclusions Students at an early stage of their cardiology training demonstrated equal performance of cardiac auscultation whether they had received an additional short auscultation course based on computer simulated training, or had had additional bedside training. PMID:20082701

Sibling Competition & Growth Tradeoffs. Biological vs. Statistical Significance

PubMed Central

Kramer, Karen L.; Veile, Amanda; Otárola-Castillo, Erik

2016-01-01

Early childhood growth has many downstream effects on future health and reproduction and is an important measure of offspring quality. While a tradeoff between family size and child growth outcomes is theoretically predicted in high-fertility societies, empirical evidence is mixed. This is often attributed to phenotypic variation in parental condition. However, inconsistent study results may also arise because family size confounds the potentially differential effects that older and younger siblings can have on young children’s growth. Additionally, inconsistent results might reflect that the biological significance associated with different growth trajectories is poorly understood. This paper addresses these concerns by tracking children’s monthly gains in height and weight from weaning to age five in a high fertility Maya community. We predict that: 1) as an aggregate measure family size will not have a major impact on child growth during the post weaning period; 2) competition from young siblings will negatively impact child growth during the post weaning period; 3) however because of their economic value, older siblings will have a negligible effect on young children’s growth. Accounting for parental condition, we use linear mixed models to evaluate the effects that family size, younger and older siblings have on children’s growth. Congruent with our expectations, it is younger siblings who have the most detrimental effect on children’s growth. While we find statistical evidence of a quantity/quality tradeoff effect, the biological significance of these results is negligible in early childhood. Our findings help to resolve why quantity/quality studies have had inconsistent results by showing that sibling competition varies with sibling age composition, not just family size, and that biological significance is distinct from statistical significance. PMID:26938742

Factoring local sequence composition in motif significance analysis.

PubMed

Ng, Patrick; Keich, Uri

2008-01-01

We recently introduced a biologically realistic and reliable significance analysis of the output of a popular class of motif finders. In this paper we further improve our significance analysis by incorporating local base composition information. Relying on realistic biological data simulation, as well as on FDR analysis applied to real data, we show that our method is significantly better than the increasingly popular practice of using the normal approximation to estimate the significance of a finder's output. Finally we turn to leveraging our reliable significance analysis to improve the actual motif finding task. Specifically, endowing a variant of the Gibbs Sampler with our improved significance analysis we demonstrate that de novo finders can perform better than has been perceived. Significantly, our new variant outperforms all the finders reviewed in a recently published comprehensive analysis of the Harbison genome-wide binding location data. Interestingly, many of these finders incorporate additional information such as nucleosome positioning and the significance of binding data.

Additive schemes for certain operator-differential equations

NASA Astrophysics Data System (ADS)

Vabishchevich, P. N.

2010-12-01

Unconditionally stable finite difference schemes for the time approximation of first-order operator-differential systems with self-adjoint operators are constructed. Such systems arise in many applied problems, for example, in connection with nonstationary problems for the system of Stokes (Navier-Stokes) equations. Stability conditions in the corresponding Hilbert spaces for two-level weighted operator-difference schemes are obtained. Additive (splitting) schemes are proposed that involve the solution of simple problems at each time step. The results are used to construct splitting schemes with respect to spatial variables for nonstationary Navier-Stokes equations for incompressible fluid. The capabilities of additive schemes are illustrated using a two-dimensional model problem as an example.

Operational momentum in large-number addition and subtraction by 9-month-olds.

PubMed

McCrink, Koleen; Wynn, Karen

2009-08-01

Recent studies on nonsymbolic arithmetic have illustrated that under conditions that prevent exact calculation, adults display a systematic tendency to overestimate the answers to addition problems and underestimate the answers to subtraction problems. It has been suggested that this operational momentum results from exposure to a culture-specific practice of representing numbers spatially; alternatively, the mind may represent numbers in spatial terms from early in development. In the current study, we asked whether operational momentum is present during infancy, prior to exposure to culture-specific representations of numbers. Infants (9-month-olds) were shown videos of events involving the addition or subtraction of objects with three different types of outcomes: numerically correct, too large, and too small. Infants looked significantly longer only at those incorrect outcomes that violated the momentum of the arithmetic operation (i.e., at too-large outcomes in subtraction events and too-small outcomes in addition events). The presence of operational momentum during infancy indicates developmental continuity in the underlying mechanisms used when operating over numerical representations.

Hemiclonal analysis reveals significant genetic, environmental and genotype x environment effects on sperm size in Drosophila melanogaster.

PubMed

Morrow, E H; Leijon, A; Meerupati, A

2008-11-01

Spermatozoa are the most diverse of all animal cells. Variation in size alone is enormous and yet there are still no clear evolutionary explanations that can account for such diversity. The basic genetics of sperm form is also poorly understood, although sperm size is known to have a strong genetic component. Here, using hemiclonal analysis of Drosophila melanogaster, we demonstrate that there is not only a significant additive genetic component contributing to phenotypic variation in sperm length but also a significant environmental effect. Furthermore, the plasticity of sperm size has a significant genetic component to it (a genotype x environment interaction). A genotype x environment interaction could contribute to the maintenance of the substantial genetic variation in this trait and thereby explain the persistent inter-male differences in sperm size seen in numerous taxa. We suggest that the low conditional dependence and high heritability but low evolvability (the coefficient of additive genetic variation) of sperm length is more consistent with a history of stabilizing selection rather than either sexual selection or strong directional selection.

Chemical composition, plant secondary metabolites, and minerals of green and black teas and the effect of different tea-to-water ratios during their extraction on the composition of their spent leaves as potential additives for ruminants.

PubMed

Ramdani, Diky; Chaudhry, Abdul Shakoor; Seal, Chris J

2013-05-22

This study characterized the chemical composition of green and black teas as well as their spent tea leaves (STL) following boiling in water with different tea-to-water ratios. The green and black tea leaves had statistically similar (g/kg dry matter (DM), unless stated otherwise) DM (937 vs 942 g/kg sample), crude protein (240 vs 242), and ash (61.8 vs 61.4), but green tea had significantly higher (g/kg DM) total phenols (231 vs 151), total tannins (204 vs 133), condensed tannins (176 vs 101), and total saponins (276 vs 86.1) and lower neutral detergent fiber (254 vs 323) and acid detergent fiber (211 vs 309) than the black tea leaves. There was no significant difference between the green and black tea leaves for most mineral components except Mn, which was significantly higher in green tea leaves, and Na and Cu, which were significantly higher in black tea leaves. A higher tea-to-water ratio during extraction significantly reduced the loss of soluble compounds into water and hence yielded more nutrient-rich STL. On the basis of these analyses it appears that the green and black tea leaves alongside their STL have the potential for use as sources of protein, fiber, secondary metabolites, and minerals in ruminant diets. The presence of high levels of plant secondary metabolites in either tea leaves or their STL suggests that they may have potential for use as natural additives in ruminant diets.

The effects of chemical additives on the production of disinfection byproducts and ecotoxicity in simulated ballast water

NASA Astrophysics Data System (ADS)

Park, Chul; Cha, Hyung-Gon; Lee, Ji-Hyun; Choi, Tae Seop; Lee, Jungsuk; Kim, Young-Hee; Bae, Minjung; Shin, Kyoungsoon; Choi, Keun-Hyung

2017-11-01

The management of ship ballast water is essential to stemming the introduction of non-indigenous species. Approval for onboard installation of a system to treat ballast water requires rigorous land-based testing as dictated in the G8 guideline by the International Maritime Organization. However, this testing lacks standardization-most notably augmentation of organic carbon for influent water by adding chemical additives. Electrochlorination is a popular treatment method for ballast water, in which chlorinated oxidants react with organisms and organic matter in water. The additives could thus affect the treatment efficacy of the ballast water. Here, we examined the effects of several candidates of organic carbon additives on the consumption of total residual oxidant (TRO), the production of disinfection byproducts (DBPs), plankton survival, and ecotoxicity. The TRO consumption over five days of storage was higher in electrochlorinated seawater amended with lignin and Metamucil when compared with seawaters with other organic carbon compounds. DBP production varied by almost two orders of magnitude as a function of the various additives. This was largely attributed to the production of tribromomethane and dibromoacetic acid. The survival of Artemia franciscana was significantly different across waters of different organic carbon additives. Algal toxicity testing with the marine haptophyte Isochrysis galbana significantly reduced growth in lignin- and Metamucil-treated seawaters, but not with other organic carbon compounds. Bioluminescence in Vibrio fischeri sharply declined in electrochlorinated seawaters with all types of organic carbon compounds, but no toxicity was manifested once the electrochlorinated seawaters were neutralized with sodium thiosulfate. The varying degrees of outcome suggest that it might be better to eliminate the requirements of adding organic carbon to test water as long as natural water was used for land-based testing of BWMS. If needed, the

The addition of a tension night splint to a structured home rehabilitation programme in patients with chronic plantar fasciitis does not lead to significant additional benefits in either pain, function or flexibility: a single-blinded randomised controlled trial

PubMed Central

2017-01-01

Objective To identify any improvements in pain or function in patients with chronic plantar fasciitis following the use of a tension night splint (TNS). Methods Single-blinded randomised controlled trial, with participants split evenly between intervention group (TNS + home exercise programme/HEP) and control group (HEP only). Follow-up at 3 months, with interim data at 6 weeks. Results 40 patients recruited. Mean age 52.1 years, 33% male, mean body mass index 30.8 kg/m2, mean duration of symptoms of 25 months. Improvement in self-reported ‘average pain' in the intervention group from 6.8/10 at baseline to 5.6/10 at 6 weeks, and 5.3/10 at 3 months (both clinically and statistically significant at both time points), compared with control group of 7.1/10 at baseline to 6.2/10 at 6 weeks and 5.6/10 at 3 months (significant only at 3 months). Improvements in self-reported ‘worst pain', ‘pain walking' and ‘pain first thing in the morning' in both groups at all time periods. Improvements were seen in revised Foot Function Index at all time points in both groups, but limited changes seen in flexibility and no significant changes in anxiety or depression Hospital Anxiety and Depression Scale domains or sleep quality in either group. However, no differences were seen between the outcomes seen in the two groups for the majority of the measures studied. Conclusions Improvements in pain and some functional measures seen in both groups, with few, if any, differences seen in outcomes between the intervention group compared with the control group. However, ongoing pain symptoms were reported in both groups, suggesting that ‘help' rather than ‘cure' was obtained for the majority. There is a possibility of earlier benefit seen in the intervention group compared with the control group, but data are unclear and further work may be needed. Trial registration number ClinicalTrials.gov: NCT02546115; results. PMID:29259809

Additive scales in degenerative disease--calculation of effect sizes and clinical judgment.

PubMed

Riepe, Matthias W; Wilkinson, David; Förstl, Hans; Brieden, Andreas

2011-12-16

The therapeutic efficacy of an intervention is often assessed in clinical trials by scales measuring multiple diverse activities that are added to produce a cumulative global score. Medical communities and health care systems subsequently use these data to calculate pooled effect sizes to compare treatments. This is done because major doubt has been cast over the clinical relevance of statistically significant findings relying on p values with the potential to report chance findings. Hence in an aim to overcome this pooling the results of clinical studies into a meta-analyses with a statistical calculus has been assumed to be a more definitive way of deciding of efficacy. We simulate the therapeutic effects as measured with additive scales in patient cohorts with different disease severity and assess the limitations of an effect size calculation of additive scales which are proven mathematically. We demonstrate that the major problem, which cannot be overcome by current numerical methods, is the complex nature and neurobiological foundation of clinical psychiatric endpoints in particular and additive scales in general. This is particularly relevant for endpoints used in dementia research. 'Cognition' is composed of functions such as memory, attention, orientation and many more. These individual functions decline in varied and non-linear ways. Here we demonstrate that with progressive diseases cumulative values from multidimensional scales are subject to distortion by the limitations of the additive scale. The non-linearity of the decline of function impedes the calculation of effect sizes based on cumulative values from these multidimensional scales. Statistical analysis needs to be guided by boundaries of the biological condition. Alternatively, we suggest a different approach avoiding the error imposed by over-analysis of cumulative global scores from additive scales.

Nanocrystal Additives for Advanced Lubricants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, Gregory; Lohuis, James; Demas, Nicholaos

The innovations in engine and drivetrain lubricants are mainly driven by ever more stringent regulations, which demand better fuel economy, lower carbon emission, and less pollution. Many technologies are being developed for the next generations of vehicles to achieve these goals. Even if these technologies can be adopted, there still is a significant need for a “drop-in” lubricant solution for the existing ground vehicle fleet to reap immediate fuel savings at the same time reduce the pollution. Dramatic improvements were observed when Pixelligent’s proprietary, mono-dispersed, and highly scalable metal oxide nanocrystals were added to the base oils. The dispersions inmore » base and formulated oils are clear and without any change of appearance and viscosity. However, the benefits provided by the nanocrystals were limited to the base oils due to the interference of exiting additives in the fully formulated oils. Developing a prototype formulation including the nanocrystals that can demonstrate the same improvements observed in the base oils is a critical step toward the commercialization of these advanced nano-additives. A ‘bottom-up’ approach was adopted to develop a prototype lubricant formulation to avoid the complicated interactions with the multitude of additives, only minimal numbers of most essential additives are added, step by step, into the formulation, to ensure that they are compatible with the nanocrystals and do not compromise their tribological performance. Tribological performance are characterized to come up with the best formulations that can demonstrate the commercial potential of the nano-additives.« less

Seasonal Patterns of Soil Respiration and Related Soil Biochemical Properties under Nitrogen Addition in Winter Wheat Field

PubMed Central

Liang, Guopeng; Houssou, Albert A.; Wu, Huijun; Cai, Dianxiong; Wu, Xueping; Gao, Lili; Li, Jing; Wang, Bisheng; Li, Shengping

2015-01-01

Understanding the changes of soil respiration under increasing N fertilizer in cropland ecosystems is crucial to accurately predicting global warming. This study explored seasonal variations of soil respiration and its controlling biochemical properties under a gradient of Nitrogen addition during two consecutive winter wheat growing seasons (2013–2015). N was applied at four different levels: 0, 120, 180 and 240 kg N ha-1 year-1 (denoted as N0, N12, N18 and N24, respectively). Soil respiration exhibited significant seasonal variation and was significantly affected by soil temperature with Q10 ranging from 2.04 to 2.46 and from 1.49 to 1.53 during 2013–2014 and 2014–2015 winter wheat growing season, respectively. Soil moisture had no significant effect on soil respiration during 2013–2014 winter wheat growing season but showed a significant and negative correlation with soil respiration during 2014–2015 winter wheat growing season. Soil respiration under N24 treatment was significantly higher than N0 treatment. Averaged over the two growing seasons, N12, N18 and N24 significantly increased soil respiration by 13.4, 16.4 and 25.4% compared with N0, respectively. N addition also significantly increased easily extractable glomalin-related soil protein (EEG), soil organic carbon (SOC), total N, ammonium N and nitrate N contents. In addition, soil respiration was significantly and positively correlated with β-glucosidase activity, EEG, SOC, total N, ammonium N and nitrate N contents. The results indicated that high N fertilization improved soil chemical properties, but significantly increased soil respiration. PMID:26629695

Resveratrol and Epigallocatechin-3-gallate addition to thawed boar sperm improves in vitro fertilization.

PubMed

Gadani, B; Bucci, D; Spinaci, M; Tamanini, C; Galeati, G

2017-03-01

Thawing is one of the most delicate process after semen cryopreservation as spermatozoa pass from a dormant metabolic stage to a sudden awakening in cellular metabolism. The rapid oxygen utilization leads to an overproduction of reactive oxygen species that can damage sperm cells, thus causing a significant decrease of fertilizing potential of frozen-thawed spermatozoa. Resveratrol (Res) is a natural grape-derived phytoalexin and Epigallocatechin-3-gallate (EGCG) is the major polyphenol in green tea (Camellia sinensis); both molecules are known to possess high levels of antioxidant activity. The objective of the present study was to assess the effect of different concentrations of Res (0.5, 1 or 2 mM; Experiment 1) or EGCG (25, 50 or 100 μM; Experiment 2) supplementation to thawing boar semen extender on sperm quality parameters (viability and acrosome integrity) and in vitro fertilization (IVF). Semen after thawing and dilution with three volumes of Beltsville Thawing Solution (BTS), was immediately divided in control group without antioxidants addition (CTR) and either Res or EGCG groups. Sperm viability and acrosome integrity were evaluated in CTR, Res or EGCG groups after 1 h of incubation at 37 °C. The addition of different doses of Res or EGCG to thawing extender for 1 h did not induce any effect on boar sperm viability and acrosome integrity. However, both Res and EGCG treated samples exhibited a significantly higher penetration rate compared with CTR when used for IVF. In particular the treatment with all the EGCG concentrations increased the penetration rate (P < 0.01) while only Res 2 mM induced a significant increase of this parameter (P < 0.01). In addition, EGCG 25 and 50 μM supplementation significantly increased total fertilization efficiency as compared to control (EGCG 25 μM: 40.3 ± 8.2 vs 26.8 ± 9.5, P < 0.05; EGCG 50 μM: 40.4 ± 7.8 vs 26.8 ± 9.5, P < 0.01). The same effect was observed with Res 2 mM (51.0�

Cyanoethylated compounds as additives in lithium/lithium batteries

DOEpatents

Nagasubramanian, Ganesan

1999-01-01

The power loss of lithium/lithium ion battery cells is significantly reduced, especially at low temperatures, when about 1% by weight of an additive is incorporated in the electrolyte layer of the cells. The usable additives are organic solvent soluble cyanoethylated polysaccharides and poly(vinyl alcohol). The power loss decrease results primarily from the decrease in the charge transfer resistance at the interface between the electrolyte and the cathode.

Urinary Collagen Fragments Are Significantly Altered in Diabetes: A Link to Pathophysiology

PubMed Central

Argilés, Àngel; Cerna, Marie; Delles, Christian; Dominiczak, Anna F.; Gayrard, Nathalie; Iphöfer, Alexander; Jänsch, Lothar; Jerums, George; Medek, Karel; Mischak, Harald; Navis, Gerjan J.; Roob, Johannes M.; Rossing, Kasper; Rossing, Peter; Rychlík, Ivan; Schiffer, Eric; Schmieder, Roland E.; Wascher, Thomas C.; Winklhofer-Roob, Brigitte M.; Zimmerli, Lukas U.; Zürbig, Petra; Snell-Bergeon, Janet K.

2010-01-01

Background The pathogenesis of diabetes mellitus (DM) is variable, comprising different inflammatory and immune responses. Proteome analysis holds the promise of delivering insight into the pathophysiological changes associated with diabetes. Recently, we identified and validated urinary proteomics biomarkers for diabetes. Based on these initial findings, we aimed to further validate urinary proteomics biomarkers specific for diabetes in general, and particularity associated with either type 1 (T1D) or type 2 diabetes (T2D). Methodology/Principal Findings Therefore, the low-molecular-weight urinary proteome of 902 subjects from 10 different centers, 315 controls and 587 patients with T1D (n = 299) or T2D (n = 288), was analyzed using capillary-electrophoresis mass-spectrometry. The 261 urinary biomarkers (100 were sequenced) previously discovered in 205 subjects were validated in an additional 697 subjects to distinguish DM subjects (n = 382) from control subjects (n = 315) with 94% (95% CI: 92–95) accuracy in this study. To identify biomarkers that differentiate T1D from T2D, a subset of normoalbuminuric patients with T1D (n = 68) and T2D (n = 42) was employed, enabling identification of 131 biomarker candidates (40 were sequenced) differentially regulated between T1D and T2D. These biomarkers distinguished T1D from T2D in an independent validation set of normoalbuminuric patients (n = 108) with 88% (95% CI: 81–94%) accuracy, and in patients with impaired renal function (n = 369) with 85% (95% CI: 81–88%) accuracy. Specific collagen fragments were associated with diabetes and type of diabetes indicating changes in collagen turnover and extracellular matrix as one hallmark of the molecular pathophysiology of diabetes. Additional biomarkers including inflammatory processes and pro-thrombotic alterations were observed. Conclusions/Significance These findings, based on the largest proteomic study performed to date on subjects with

Expression and significance of molecular biomarkers in esophageal carcinoma in different nationalities patients in Xinjiang.

PubMed

Zhang, L; Sun, J; Zhang, J Q; Yang, M; Bai, G; Ma, X L

2014-07-24

This study aimed to explore some useful biomarkers to focus on the diagnosis and therapy response judgment in esophageal squamous cell carcinoma in Xinjiang. We used enzyme-linked immunosorbent method and immunohistochemistry to detect the expression of VEGF, EGFR, ES, HER-2, and NF-κBp in the serum and tissue with esophageal squamous cell carcinoma, and to analyze the relationship between biomarkers and clinical pathology and curative effects. Our findings were as follows: 1. The serum levels of VEGF and ES in Han patients were obviously higher than those of Uygur and Kazakh patients (P < 0.05). The VEGF positive rate in patients at a later clinical stage was higher than that of the patients at an earlier clinical stage (stages II-IV were 14.29, 50.00, and 50.00%, respectively, P < 0.05), meanwhile it was higher than that of patients without lymph node metastases (78.13 vs 25.00%, P < 0.05). The curative effective rate of patients with negative expression of VEGF was higher than that of patients with positive expression of VEGF (74.67 vs 41.40%, P < 0.05). 2. The expression of EGFR protein in male patients was higher than that of female patients (69.77 vs 35.29%, P < 0.05). Before treatment, the serum EGFR level in patients was higher than the normal group (P < 0.05). 3. The serum ES level in patients before and after treatment was significantly higher than in the normal group (P < 0.05). 4. The HER-2 positive rate in higher differentiated tumor tissue was lower than that in lower differentiated tumor tissue. (The positive rate of I, II, III grade was 70.00, 30.00, and 20.00%, respectively, P < 0.05). 5. The NF-κB positive rate in patients with lymph node metastases was higher than that of patients without lymph node metastases (65.63 vs 39.27%, P < 0.05), meanwhile median survival in the latter group was higher than that of the former group (P < 0.05). Our data suggest that the expression of VEGF and ES were different in Uygur, Han, and Kazakh patients in

Experimental characterization of enhanced SNCR process with carbonaceous gas additives.

PubMed

Yao, Ting; Duan, Yufeng; Yang, Zhizhong; Li, Yuan; Wang, Linwei; Zhu, Chun; Zhou, Qiang; Zhang, Jun; She, Min; Liu, Meng

2017-06-01

Carbonaceous gases such as CO and alkanes are commonly used as additives to enhance the selective non-catalytic reduction (SNCR) performance due to their high reducibility. This study compared the effect of CO and CH 4 on NO reduction in a tubular reactor with simulated flue gas. The enhancement of C 3 H 8 on SNCR process was tested at extremely low temperature, i.e. 650 °C. Experimental results suggested that reactions between NH 3 and SO 2 were favored at low temperatures and the competition for NH 3 between SO 2 and NO was influenced by gas additives. A maximum downward shift of 25 °C and 100 °C in temperature window for 50% NO reduction efficiency was obtained with the addition of CO and CH 4 , respectively. Considerable CO emission was observed with addition of CH 4 . The addition of CH 4 contributed to the formation of a self-accelerating reaction route within NO/O 2 /NH 3 SNCR reaction system. NO 2 produced from NO accelerates the oxidation of CH 4 to CO, while the oxidation of CH 4 returns to enhance the NO reduction globally. Optimal NO reduction of 44% was achieved with addition of C 3 H 8 at 650 °C. Substantial portion of C 3 H 8 was partially oxidized to CO and the remaining was converted into C 2 H 4 and C 3 H 6 during the SNCR process. Oxidative dehydrogenation of C 3 H 8 was involved. High reactivity of C 3 H 6 and C 2 H 4 favored the further oxidation and cracking to produce CO. These differences in oxidation behavior significantly influence the promotion capacities of CO, CH 4 and C 3 H 8 for NO reduction. Copyright © 2017 Elsevier Ltd. All rights reserved.

Characteristic of Fermented Drink from Whey Cheese with Addition of Mango (Mangifera x odorata) Juice

NASA Astrophysics Data System (ADS)

Desnilasari, D.; Kumalasari, R.

2017-12-01

Whey cheese could be utilized become product such as fermented drink which is added by mango kweni juice to improve their acceptance. The aim of this research was to characterized physicochemical, sensory, and microbiology of fermented drink based on whey cheese with addition different concentration mango kweni juice of (0%, 5%, 10%, and 15%) by Lactobacillus casei. Color scale, viscosity, pH, total soluble solid, total free acid, fat, protein, total L. casei and sensory evaluation from panelist were examined after 24 hour of fermentation. Result showed that addition mango juice significantly affects the color scale, viscosity, pH, protein and number of L. casei of the product. The color of the product becomes more dark, red, and yellow. The product becomes more viscous. pH of the product become more acid and reduces protein content. Respectively total number of L. casei of the product increased 1 log. But addition of mango juice significantly did not affect sensory acceptance, total soluble solid, total free acid, and fat of the product. Sensory acceptance of the product range in dislike slightly and slightly like score that means formulation of the product need to be improved again.

Versatility of Cooperative Transcriptional Activation: A Thermodynamical Modeling Analysis for Greater-Than-Additive and Less-Than-Additive Effects

PubMed Central

Frank, Till D.; Carmody, Aimée M.; Kholodenko, Boris N.

2012-01-01

We derive a statistical model of transcriptional activation using equilibrium thermodynamics of chemical reactions. We examine to what extent this statistical model predicts synergy effects of cooperative activation of gene expression. We determine parameter domains in which greater-than-additive and less-than-additive effects are predicted for cooperative regulation by two activators. We show that the statistical approach can be used to identify different causes of synergistic greater-than-additive effects: nonlinearities of the thermostatistical transcriptional machinery and three-body interactions between RNA polymerase and two activators. In particular, our model-based analysis suggests that at low transcription factor concentrations cooperative activation cannot yield synergistic greater-than-additive effects, i.e., DNA transcription can only exhibit less-than-additive effects. Accordingly, transcriptional activity turns from synergistic greater-than-additive responses at relatively high transcription factor concentrations into less-than-additive responses at relatively low concentrations. In addition, two types of re-entrant phenomena are predicted. First, our analysis predicts that under particular circumstances transcriptional activity will feature a sequence of less-than-additive, greater-than-additive, and eventually less-than-additive effects when for fixed activator concentrations the regulatory impact of activators on the binding of RNA polymerase to the promoter increases from weak, to moderate, to strong. Second, for appropriate promoter conditions when activator concentrations are increased then the aforementioned re-entrant sequence of less-than-additive, greater-than-additive, and less-than-additive effects is predicted as well. Finally, our model-based analysis suggests that even for weak activators that individually induce only negligible increases in promoter activity, promoter activity can exhibit greater-than-additive responses when

The effect of rework content addition on the microstructure and viscoelastic properties of processed cheese.

PubMed

Černíková, Michaela; Nebesářová, Jana; Salek, Richardos Nikolaos; Popková, Romana; Buňka, František

2018-04-01

The aim of this work was to add various amounts of rework (0.0 to 20.0% wt/wt) to processed cheeses with a dry matter content of 36% (wt/wt) and fat with a dry matter content of 45% (wt/wt). The effect of the rework addition on the viscoelastic properties and microstructure of the processed cheeses was observed. The addition of rework (in this case, to processed cheese with a spreadable consistency) in the amounts of 2.5, 5.0, and 10.0% (wt/wt) increased the firmness of the processed cheese. With the further addition of rework, the consistency of the processed cheeses no longer differed significantly. The conclusions obtained by the measurement of viscoelastic properties were supported by cryo-scanning electron microscopy, where fat droplets in samples with added rework of over 10.0% (wt/wt) were smaller than fat droplets in processed cheeses with lower additions of rework. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Additive manufacturing of glass for optical applications

NASA Astrophysics Data System (ADS)

Luo, Junjie; Gilbert, Luke J.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

2016-04-01

Glasses including fused quartz have significant scientific and engineering applications including optics, communications, electronics, and hermetic seals. This paper investigates a filament fed process for Additive Manufacturing (AM) of fused quartz. Additive manufacturing has several potential benefits including increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research in AM of glasses is limited and has focused on non-optical applications. Fused quartz is studied here because of its desirability for high-quality optics due to its high transmissivity and thermal stability. Fused quartz also has a higher working temperature than soda lime glass which poses a challenge for AM. In this work, fused quartz filaments are fed into a CO2 laser generated melt pool, smoothly depositing material onto the work piece. Single tracks are printed to explore the effects that different process parameters have on the morphology of printed fused quartz. A spectrometer is used to measure the thermal radiation incandescently emitted from the melt pool. Thin-walls are printed to study the effects of layer-to-layer height. Finally, a 3D fused quartz cube is printed using the newly acquired layer height and polished on each surface. The transmittance and index homogeneity of the polished cube are both measured. These results show that the filament fed process has the potential to print fused quartz with optical transparency and of index of refraction uniformity approaching bulk processed glass.

Influence of affective significance on different levels of processing using pupil dilation in an analogical reasoning task.

PubMed

Prehn, Kristin; Heekeren, Hauke R; van der Meer, Elke

2011-02-01

The present study investigates the interaction of cognition and emotion in decision making, using an analogical reasoning task. In this task, two word pairs were presented simultaneously. Each word pair could be characterized by an associative conceptual relation (object, actor, or location relation) as well as an emotional relation (negative, neutral, or positive valence). Both types of relations were equally task-relevant: Participants had to identify both types of relations, to compare them, and to decide whether or not the word pairs were analogous, i.e., corresponding in both conceptual and emotional relations. Behavioral data showed that emotional relations were identified preferentially and faster than conceptual relations. Pupil dilations reflected the descending difficulty of the conditions and were greatest in amplitude when both conceptual and emotional correspondence was shown, intermediate when only one type of relation (either the emotional or the conceptual) corresponded, and least when neither correspondence existed. Additionally, a negative valence of the word material slowed down response times and increased pupil dilation relative to positive and neutral items. In summary, pupil and response time data together support recent (neurobiological) models concerning the interaction of emotion and cognition by showing that affective significance leads to a processing advantage at a cognitively lower level of information processing (here, identification or retrieval of relations from long-term memory) but can also distract people from higher level cognitive processes (here, from the controlled comparison of retrieved relations). Copyright © 2010 Elsevier B.V. All rights reserved.

A randomized, controlled study evaluating effects of amlodipine addition to chelators to reduce iron loading in patients with thalassemia major.

PubMed

Eghbali, Aziz; Kazemi, Hamideh; Taherahmadi, Hassan; Ghandi, Yazdan; Rafiei, Mohammad; Bagheri, Bahador

2017-12-01

Cardiomyopathy due to iron overload can be fatal in patients with thalassemia major. Calcium channel blockers seem to be effective to reduce iron loading. Our goal was to study effects of amlodipine addition to chelators on iron loading in patients with thalassemia major. This randomized, controlled, and single-center trial was performed on 56 patients with thalassemia major. Patients were randomized 1:1 to combined group (iron chelator plus amlodipine) or control group (iron chelator) for 1 year. Iron content was measured by magnetic resonance imaging; heart T2*, and liver T2*. Serum ferritin was also measured. After 12 months of treatment, myocardial T2* values had significant improvement in combined group (21.9 ± 8.0 ms to 24.5 ± 7.6 ms; P < .05); Difference between two groups was significant (P = .02). Combined treatment had no effect on hepatic T2* value (9.6 ± 2.8 ms to 9.5 ± 3.6 ms); difference between two groups was not significant (P = .2). In addition, a significant reduction was seen in serum ferritin levels in two groups. Mild gastrointestinal upset was the most common untoward effect. Addition of amlodipine to iron chelators has beneficial effects for reduction of iron loading in patients with thalassemia major. This combination therapy seems safe. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The influence of applying additional weight to the affected leg on gait patterns during aquatic treadmill walking in people poststroke.

PubMed

Jung, Taeyou; Lee, Dokyeong; Charalambous, Charalambos; Vrongistinos, Konstantinos

2010-01-01

Jung T, Lee D, Charalambous C, Vrongistinos K. The influence of applying additional weight to the affected leg on gait patterns during aquatic treadmill walking in people poststroke. To investigate how the application of additional weights to the affected leg influences gait patterns of people poststroke during aquatic treadmill walking. Comparative gait analysis. University-based aquatic therapy center. Community-dwelling volunteers (n=22) with chronic hemiparesis caused by stroke. Not applicable. Spatiotemporal and kinematic gait parameters. The use of an ankle weight showed an increase in the stance phase percentage of gait cycle (3%, P=.015) when compared with no weight. However, the difference was not significant after a Bonferroni adjustment was applied for a more stringent statistical analysis. No significant differences were found in cadence and stride length. The use of an ankle weight showed a significant decrease of the peak hip flexion (7.9%, P=.001) of the affected limb as compared with no weight condition. This decrease was marked as the reduction of unwanted limb flotation because people poststroke typically show excessive hip flexion of the paretic leg in the late swing phase followed by fluctuating hip movements during aquatic treadmill walking. The frontal and transverse plane hip motions did not show any significant differences but displayed a trend of a decrease in the peak hip abduction during the swing phase with additional weights. The use of additional weight did not alter sagittal plane kinematics of the knee and ankle joints. The use of applied weight on the affected limb can reduce unwanted limb flotation on the paretic side during aquatic treadmill walking. It can also assist the stance stability by increasing the stance phase percentage closer to 60% of gait cycle. Both findings can contribute to the development of more efficient motor patterns in gait training for people poststroke. The use of a cuff weight does not seem to reduce the

Effects of additional oxazepam in long-term users of oxazepam.

PubMed

Voshaar, Richard C Oude; Verkes, Robbert-Jan; van Luijtelaar, Gilles L J M; Edelbroek, Peter M; Zitman, Frans G

2005-02-01

Although additional dosages of benzodiazepines in long-term users of benzodiazepines are common, it is unknown whether these additional dosages resort any effect. The effects of an additional 20-mg dosage oxazepam were assessed in a double-blind, balanced-order, crossover randomized study comparing 16 long-term users of oxazepam (patients) with 18 benzodiazepine-naive controls (controls). The effects of 10 and 30 mg oxazepam were assessed at pretest and 2.5 hours after drug administration on: (a) saccadic eye movements as proxy for the sedative effect, (b) acoustic startle response (ASR) as proxy for the anxiolytic effects, (c) memory, (d) reaction time tasks, and (e) subjective measurements. Dose-related effects were found in patients on the peak velocity of saccadic eye movement and on response probability, respectively peak amplitude of the ASR. Comparison with controls, however, suggests that in patients the sedative effects might be mixed up with suppression of sedative withdrawal symptoms, whereas patients were as sensitive as benzodiazepine-naive controls for the effects of an additional dosage on the ASR. Neither 10 nor 30 mg oxazepam challenge affected the reaction time tasks in patients, whereas controls show a dose-related impairment. The memory impairing effects, however, did not differ significantly between patients and controls. In contrast to controls, patients could not discriminate between a 10- and 30-mg dosage as assessed by visual analogue scales and the STAI-DY-1, which might indicate a placebo effect in the 10-mg challenge in patients. We conclude that additional dosages of oxazepam still exert pronounced effects after daily use for more than 10 years.

Additive manufacturing of tunable lenses

NASA Astrophysics Data System (ADS)

Schlichting, Katja; Novak, Tobias; Heinrich, Andreas

2017-02-01

Individual additive manufacturing of optical systems based on 3D Printing offers varied possibilities in design and usage. In addition to the additive manufacturing procedure, the usage of tunable lenses allows further advantages for intelligent optical systems. Our goal is to bring the advantages of additive manufacturing together with the huge potential of tunable lenses. We produced tunable lenses as a bundle without any further processing steps, like polishing. The lenses were designed and directly printed with a 3D Printer as a package. The design contains the membrane as an optical part as well as the mechanical parts of the lens, like the attachments for the sleeves which contain the oil. The dynamic optical lenses were filled with an oil. The focal length of the lenses changes due to a change of the radius of curvature. This change is caused by changing the pressure in the inside of the lens. In addition to that, we designed lenses with special structures to obtain different areas with an individual optical power. We want to discuss the huge potential of this technology for several applications. Further, an appropriate controlling system is needed. Wéll show the possibilities to control and regulate the optical power of the lenses. The lenses could be used for illumination tasks, and in the future, for individual measurement tasks. The main advantage is the individuality and the possibility to create an individual design which completely fulfills the requirements for any specific application.

Additive Manufacturing Design Considerations for Liquid Engine Components

NASA Technical Reports Server (NTRS)

Whitten, Dave; Hissam, Andy; Baker, Kevin; Rice, Darron

2014-01-01

The Marshall Space Flight Center's Propulsion Systems Department has gained significant experience in the last year designing, building, and testing liquid engine components using additive manufacturing. The department has developed valve, duct, turbo-machinery, and combustion device components using this technology. Many valuable lessons were learned during this process. These lessons will be the focus of this presentation. We will present criteria for selecting part candidates for additive manufacturing. Some part characteristics are 'tailor made' for this process. Selecting the right parts for the process is the first step to maximizing productivity gains. We will also present specific lessons we learned about feature geometry that can and cannot be produced using additive manufacturing machines. Most liquid engine components were made using a two-step process. The base part was made using additive manufacturing and then traditional machining processes were used to produce the final part. The presentation will describe design accommodations needed to make the base part and lessons we learned about which features could be built directly and which require the final machine process. Tolerance capabilities, surface finish, and material thickness allowances will also be covered. Additive Manufacturing can produce internal passages that cannot be made using traditional approaches. It can also eliminate a significant amount of manpower by reducing part count and leveraging model-based design and analysis techniques. Information will be shared about performance enhancements and design efficiencies we experienced for certain categories of engine parts.

Immobilization of uranium in contaminated soil by natural apatite addition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mrdakovic Popic, Jelena; Stojanovic, Mirjana; Milosevic, Sinisa

2007-07-01

Available in abstract form only. Full text of publication follows: The goal of this study was to evaluate the effectiveness of Serbian natural mineral apatite as soil additive for reducing the migration of uranium from contaminated sediments. In laboratory study we investigated the sorption properties of domestic apatite upon different experimental conditions, such as pH, adsorbent mass, reaction period, concentration of P{sub 2}O{sub 5} in apatite, solid/liquid ratio. In second part of study, we did the quantification of uranium in soil samples, taken from uranium mine site 'Kalna', by sequential extraction method. The same procedure was, also, used for uraniummore » determination in contaminated soil samples after apatite addition, in order to determine the changes in U distribution in soil fraction. The obtained results showed the significant level of immobilization (96.7%) upon certain conditions. Increase of %P{sub 2}O{sub 5} in apatite and process of mechano-chemical activation led to increase of immobilization capacity from 17.50% till 91.64%. The best results for uranium binding were obtained at pH 5.5 and reaction period 60 days (98.04%) The sequential extraction showed the presence of uranium (48.2%) in potentially available soil fractions, but with the apatite addition uranium content in these fractions decreased (30.64%), what is considering environmental aspect significant fact. In situ immobilization of radionuclide using inexpensive sequestering agents, such as apatite, is very adequate for big contaminated areas of soil with low level of contamination. This investigation study on natural apatite from deposit 'Lisina' Serbia was the first one of this type in our country. Key words: apatite, uranium, immobilization, soil, contamination. (authors)« less

Biological significance of dead biomass retention trait in Mediterranean Basin species: an analysis between different successional niches and regeneration strategies as functional groups.

PubMed

Baeza, M J; Santana, V M

2015-11-01

Standing dead biomass retention is considered one of the most relevant fuel structural traits to affect plant flammability. However, very little is known about the biological significance of this trait and its distribution between different functional groups. Our aim was to analyse how the proportion of dead biomass produced in Mediterranean species is related to the successional niche of species (early-, mid- and late-successional stages) and the regeneration strategy of species (seeders and resprouters). We evaluated biomass distribution by size classes and standing dead biomass retention in nine dominant species from the Mediterranean Basin in different development stages (5, 9, 14 and 26 years since the last fire). The results revealed significant differences in the standing dead biomass retention of species that presented a distinct successional niche or regeneration strategy. These differences were restricted to the oldest ages studied (>9 years). Tree and small tree resprouters, typical in late-successional stages, presented slight variations with age and a less marked trend to retain dead biomass, while seeder shrubs and dwarf shrubs, characteristic of early-successional stages, showed high dead biomass loads. Our results suggest that the species that tend to retain more dead branches are colonising species that may promote fire in early-successional stages. © 2015 German Botanical Society and The Royal Botanical Society of the Netherlands.

Effect of the chlortetracycline addition method on methane production from the anaerobic digestion of swine wastewater.

PubMed

Huang, Lu; Wen, Xin; Wang, Yan; Zou, Yongde; Ma, Baohua; Liao, Xindi; Liang, Juanboo; Wu, Yinbao

2014-10-01

Effects of antibiotic residues on methane production in anaerobic digestion are commonly studied using the following two antibiotic addition methods: (1) adding manure from animals that consume a diet containing antibiotics, and (2) adding antibiotic-free animal manure spiked with antibiotics. This study used chlortetracycline (CTC) as a model antibiotic to examine the effects of the antibiotic addition method on methane production in anaerobic digestion under two different swine wastewater concentrations (0.55 and 0.22mg CTC/g dry manure). The results showed that CTC degradation rate in which manure was directly added at 0.55mg CTC/g (HSPIKE treatment) was lower than the control values and the rest of the treatment groups. Methane production from the HSPIKE treatment was reduced (p<0.05) by 12% during the whole experimental period and 15% during the first 7days. The treatments had no significant effect on the pH and chemical oxygen demand value of the digesters, and the total nitrogen of the 0.55mg CTC/kg manure collected from mediated swine was significantly higher than the other values. Therefore, different methane production under different antibiotic addition methods might be explained by the microbial activity and the concentrations of antibiotic intermediate products and metabolites. Because the primary entry route of veterinary antibiotics into an anaerobic digester is by contaminated animal manure, the most appropriate method for studying antibiotic residue effects on methane production may be using manure from animals that are given a particular antibiotic, rather than adding the antibiotic directly to the anaerobic digester. Copyright © 2014. Published by Elsevier B.V.

Tibial Tray Thickness Significantly Increases Medial Tibial Bone Resorption in Cobalt-Chromium Total Knee Arthroplasty Implants.

PubMed

Martin, J Ryan; Watts, Chad D; Levy, Daniel L; Miner, Todd M; Springer, Bryan D; Kim, Raymond H

2017-01-01

Stress shielding is an uncommon complication associated with primary total knee arthroplasty. Patients are frequently identified radiographically with minimal clinical symptoms. Very few studies have evaluated risk factors for postoperative medial tibial bone loss. We hypothesized that thicker cobalt-chromium tibial trays are associated with increased bone loss. We performed a retrospective review of 100 posterior stabilized, fixed-bearing total knee arthroplasty where 50 patients had a 4-mm-thick tibial tray (thick tray cohort) and 50 patients had a 2.7-mm-thick tibial tray (thin tray cohort). A clinical evaluation and a radiographic assessment of medial tibial bone loss were performed on both cohorts at a minimum of 2 years postoperatively. Mean medial tibial bone loss was significantly higher in the thick tray cohort (1.07 vs 0.16 mm; P = .0001). In addition, there were significantly more patients with medial tibial bone loss in the thick tray group compared with the thin tray group (44% vs 10%, P = .0002). Despite these differences, there were no statistically significant differences in range of motion, knee society score, complications, or revision surgeries performed. A thicker cobalt-chromium tray was associated with significantly more medial tibial bone loss. Despite these radiographic findings, we found no discernable differences in clinical outcomes in our patient cohort. Further study and longer follow-up are needed to understand the effects and clinical significance of medial tibial bone loss. Copyright © 2016 Elsevier Inc. All rights reserved.

Experiences with three different fiber supplements in weight reduction.

PubMed

Birketvedt, Grethe Støa; Shimshi, Mona; Erling, Thom; Florholmen, Jon

2005-01-01

Fiber supplements added to a caloric diet have additional effects on weight reduction in overweight subjects. The aim of this study was to compare the effect of various commercial fiber supplements (glucomannan, guar gum and alginate) on weight reduction in healthy overweight subjects. One hundred and seventy six men and women were included to receive either active fiber substance or placebo in randomized placebo-controlled studies. The fiber supplements consisted of the viscous fibers glucomannan (Chrombalance), glucomannan and guar gum (Appe-Trim) and glucomannan, guar gum and alginat (Glucosahl). All fiber supplements plus a balanced 1200 kcal diet induced significantly weight reduction more than placebo and diet alone, during a five week observation period. However, there were no significant differences between the different fibers in their ability to induce weight reduction, which was approximately 0.8 kg/week (3.8 +/- 0.9, 4.4 +/- 2.0, 4.1 +/- 0.6 in the Chrombalance, Appe-Trim and Glucosahl group, respectively). Glucomannan induced body weight reduction in healthy overweight subjects, whereas the addition of guar gum and alginate did not seem to cause additional loss of weight.

The virucidal effects against murine norovirus and feline calicivirus F4 as surrogates for human norovirus by the different additive concentrations of ethanol-based sanitizers.

PubMed

Akasaka, Tempei; Shimizu-Onda, Yuko; Hayakawa, Satoshi; Ushijima, Hiroshi

2016-03-01

Since human norovirus is non-cultivable, murine norovirus and feline calicivirus have been used as surrogates. In this study, the virucidal effects of ethanol-based sanitizers with different concentrations of additives (malic acid/sodium malate, glycerin-fatty acid ester) against murine norovirus and feline calicivirus F4 were examined. The ethanol-based sanitizers at pH 7 showed sufficient virucidal effects, but glycerin-fatty acid ester included in ethanol-based sanitizers at pH 4 or 6 reduced the virucidal effects against murine norovirus. The ethanol-based sanitizers containing malic acid/sodium malate inactivated feline calicivirus F4 in shorter time, but there is no difference between ethanol-based sanitizers with and without glycerin-fatty acid ester. Traditionally, feline calicivirus has been used for long time as a surrogate virus for human norovirus. However, this study suggested that murine norovirus and feline calicivirus F4 had different sensitivity with the additive components of ethanol-based sanitizers. Therefore, using feline calicivirus alone as a surrogate for human norovirus may not be sufficient to evaluate the virucidal effect of sanitizers on food-borne infections caused by human norovirus. Sanitizers having virucidal effects against at least both murine norovirus and feline calicivirus may be more suitable to inactivate human norovirus. Copyright © 2015. Published by Elsevier Ltd.

Tribological study on rapeseed oil with nano-additives in close contact sliding situation

NASA Astrophysics Data System (ADS)

Gupta, Rajeev Nayan; Harsha, A. P.; Singh, Sagar

2018-02-01

The present work deals with the tribological evaluation of three types of nano-additives, i.e., copper oxide (CuO; ≈ 151.2 nm), cerium oxide (CeO2; ≈ 80 nm) and polytetrafluoroethylene (PTFE; ≈ 90.4 nm) with rapeseed oil under steel-steel sliding contacts. The nano-additives concentrations in the base oil were 0.1, 0.25 and 0.5% w/v for the lubricant formulation. Further, the rapeseed oil was also epoxidized by a chemical method and the tribological behavior was compared with the base oil (unmodified oil) at similar nano-additives concentrations. The ASTM standards were followed for the study of wear preventive and extreme-pressure analysis of nanolubricants, and it was carried out using four-ball tester. In the antiwear test, CeO2 and PTFE nano-additives have shown the significant reduction in the wear scar diameter at the concentration of 0.1% w/v. In the extreme-pressure test, 0.5% w/v concentration was optimum for oxide nanoparticles; however, PTFE nanoparticles did not show positive effect with both the base oils. Different characterization techniques were employed to confirm the oil modification and for the study of the worn surfaces.

Significance of lymph node capsular invasion in esophageal squamous cell carcinoma.

PubMed

Sakai, Makoto; Suzuki, Shigemasa; Sano, Akihiko; Tanaka, Naritaka; Inose, Takanori; Sohda, Makoto; Nakajima, Masanobu; Miyazaki, Tatsuya; Kuwano, Hiroyuki

2012-06-01

Extranodal invasion (ENI) has been reported to be associated with a poor prognosis in several malignancies. However, previous studies have included perinodal fat tissue tumor deposits in their definitions of ENI. To investigate the precise nature of ENI in esophageal squamous cell carcinoma (ESCC), we excluded these tumor deposits from our definition of ENI and defined tumor cell invasion through the lymph node capsule and into the perinodal tissues as lymph node capsular invasion (LNCI). The aim of the current study was to elucidate the significance of LNCI in ESCC. We investigated the associations between LNCI and other clinicopathologic features in 139 surgically resected ESCC. We also investigated the prognostic significance of LNCI in ESCC. LNCI was detected in 35 (25.2%) of 139 patients. The overall survival rate of the ESCC patients with LNCI was significantly lower than that of the ESCC patients with lymph node metastasis who were negative for LNCI. The survival difference between the patients with 1–3 lymph node metastases without LNCI and those with no lymph node metastasis was not significant. LNCI was significantly associated with distant organ recurrence. LNCI was also found to be an independent predictor of overall survival in addition to the number of lymph node metastases. LNCI in ESCC patients is an indicator of distant organ recurrence and a worse prognosis. LNCI could be used as a candidate marker for designing more precise staging and therapeutic strategies for ESCC.

A SIGNIFICANCE TEST FOR THE LASSO1

PubMed Central

Lockhart, Richard; Taylor, Jonathan; Tibshirani, Ryan J.; Tibshirani, Robert

2014-01-01

In the sparse linear regression setting, we consider testing the significance of the predictor variable that enters the current lasso model, in the sequence of models visited along the lasso solution path. We propose a simple test statistic based on lasso fitted values, called the covariance test statistic, and show that when the true model is linear, this statistic has an Exp(1) asymptotic distribution under the null hypothesis (the null being that all truly active variables are contained in the current lasso model). Our proof of this result for the special case of the first predictor to enter the model (i.e., testing for a single significant predictor variable against the global null) requires only weak assumptions on the predictor matrix X. On the other hand, our proof for a general step in the lasso path places further technical assumptions on X and the generative model, but still allows for the important high-dimensional case p > n, and does not necessarily require that the current lasso model achieves perfect recovery of the truly active variables. Of course, for testing the significance of an additional variable between two nested linear models, one typically uses the chi-squared test, comparing the drop in residual sum of squares (RSS) to a χ12 distribution. But when this additional variable is not fixed, and has been chosen adaptively or greedily, this test is no longer appropriate: adaptivity makes the drop in RSS stochastically much larger than χ12 under the null hypothesis. Our analysis explicitly accounts for adaptivity, as it must, since the lasso builds an adaptive sequence of linear models as the tuning parameter λ decreases. In this analysis, shrinkage plays a key role: though additional variables are chosen adaptively, the coefficients of lasso active variables are shrunken due to the l1 penalty. Therefore, the test statistic (which is based on lasso fitted values) is in a sense balanced by these two opposing properties—adaptivity and

Antisolvent precipitation of novel xylitol-additive crystals to engineer tablets with improved pharmaceutical performance.

PubMed

Kaialy, Waseem; Maniruzzaman, Mohammad; Shojaee, Saeed; Nokhodchi, Ali

2014-12-30

The purpose of this work was to develop stable xylitol particles with modified physical properties, improved compactibility and enhanced pharmaceutical performance without altering polymorphic form of xylitol. Xylitol was crystallized using antisolvent crystallization technique in the presence of various hydrophilic polymer additives, i.e., polyethylene glycol (PEG), polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA) at a range of concentrations. The crystallization process did not influence the stable polymorphic form or true density of xylitol. However, botryoidal-shaped crystallized xylitols demonstrated different particle morphologies and lower powder bulk and tap densities in comparison to subangular-shaped commercial xylitol. Xylitol crystallized without additive and xylitol crystallized in the presence of PVP or PVA demonstrated significant improvement in hardness of directly compressed tablets; however, such improvement was observed to lesser extent for xylitol crystallized in the presence of PEG. Crystallized xylitols produced enhanced dissolution profiles for indomethacin in comparison to original xylitol. The influence of additive concentration on tablet hardness was dependent on the type of additive, whereas an increased concentration of all additives provided an improvement in the dissolution behavior of indomethacin. Antisolvent crystallization using judiciously selected type and concentration of additive can be a potential approach to prepare xylitol powders with promising physicomechanical and pharmaceutical properties. Copyright © 2014 Elsevier B.V. All rights reserved.

Effects of addition of sodium lauryl sulfate on frozen-thawed canine spermatozoa.

PubMed

Hori, Tatsuya; Kaseki, Hanae; Fukuhara, Youko; Oba, Hiromichi; Mizutani, Tatsuji; Kawakami, Eiichi; Tsutsui, Toshihiko

2006-10-01

The addition of Orvus ES paste (OEP) to extender may be essential for preparing frozen dog semen. The major ingredient of OEP is sodium lauryl sulfate (SLS). In this study, we compared the effect of SLS on frozen dog semen with that of OEP. There were no significant differences between the 2-mg/ml SLS group and OEP group concerning sperm motility, viability and the percentage of viable sperm with intact acrosomes after freeze-thawing. These results suggest that the effectiveness of frozen dog semen extender containing 2 mg/ml of SLS is similar effective to that demonstrated for OEP.

Synthesis of DHA/EPA-rich phosphatidylcholine by immobilized phospholipase A1: effect of water addition and vacuum condition.

PubMed

Li, Daoming; Qin, Xiaoli; Wang, Weifei; Li, Zhigang; Yang, Bo; Wang, Yonghua

2016-08-01

DHA/EPA-rich phosphatidylcholine (PC) was successfully synthesized by immobilized phospholipase A1 (PLA1)-catalyzed transesterification of PC and DHA/EPA-rich ethyl esters in a solvent-free system. Effects of reaction temperature, water addition and substrate mass ratio on the incorporation of DHA/EPA were evaluated using response surface methods (RSM). Water addition had most significant effect on the incorporation. Reaction temperature and substrate mass ratio, however, had no significant effect on the incorporation. The maximal incorporation was 19.09 % (24 h) under the following conditions: temperature 55.7 °C, water addition 1.1 wt % and substrate mass ratio (ethyl esters/PC) 6.8:1. Furthermore, effects of water addition (from 0 to 1.25 wt %) on DHA/EPA incorporation and the composition of products were further investigated. The immobilized PLA1 was more active when water addition was above 0.5 wt %. By monitoring the reaction processes with different water addition, a possible reaction scheme was proposed for transesterification of PC with DHA/EPA-rich ethyl esters. In summary, PC and sn2-lysophosphatidylocholine (LPC) were predominant in the mixtures at early stages of reaction, whereas sn1-LPC and glycerophosphocholine (GPC) predominant at later stages. The vacuum employed after 24 h significantly increased the incorporation of DHA/EPA and the composition of PC, and the highest incorporation (30.31 %) of DHA/EPA was obtained at 72 h and the yield of PC was 47.2 %.

[Influence of liquid ceramic additive on binding of heavy metal during the vitrification of fly ash from municipal solid waste incinerator].

PubMed

Li, Run-dong; Nie, Yong-feng; Li, Ai-min; Wang, Lei; Chi, Yong; Cen, Ke-fa

2004-09-01

Vitrification process can effectively control the leachability of heavy metals in fly ash generated from municipal solid waste incinerator (MWSI). The use of liquid ceramic (LC) additive as a heavy metal chemical stabilization agent was evaluated for MSWI fly ash. The residuals of chromium, lead and zinc in slag increase by different degree with liquid ceramic additive at 1400 degrees C, while those of cadmium and copper decreases. The migrating characteristic of nickel is hardly affected by the additive less than 10%. The volatilization of Cr and Zn occurs after 61 minute with 10% addition of LC, and the binding efficiency of Cr decreases with increasing of melting temperature. The results indicate that the binding efficiency of heavy metals was affected greatly by LC additive and showed significant differences according to type of heavy metal during melting process. The short melting time (no longer than 33 min) is useful to obtain high binding efficiency of heavy metals.

Effect of additive particles on mechanical, thermal, and cell functioning properties of poly(methyl methacrylate) cement

PubMed Central

Khandaker, Morshed; Vaughan, Melville B; Morris, Tracy L; White, Jeremiah J; Meng, Zhaotong

2014-01-01

The most common bone cement material used clinically today for orthopedic surgery is poly(methyl methacrylate) (PMMA). Conventional PMMA bone cement has several mechanical, thermal, and biological disadvantages. To overcome these problems, researchers have investigated combinations of PMMA bone cement and several bioactive particles (micrometers to nanometers in size), such as magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica. A study comparing the effect of these individual additives on the mechanical, thermal, and cell functional properties of PMMA would be important to enable selection of suitable additives and design improved PMMA cement for orthopedic applications. Therefore, the goal of this study was to determine the effect of inclusion of magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica additives in PMMA on the mechanical, thermal, and cell functional performance of PMMA. American Society for Testing and Materials standard three-point bend flexural and fracture tests were conducted to determine the flexural strength, flexural modulus, and fracture toughness of the different PMMA samples. A custom-made temperature measurement system was used to determine maximum curing temperature and the time needed for each PMMA sample to reach its maximum curing temperature. Osteoblast adhesion and proliferation experiments were performed to determine cell viability using the different PMMA cements. We found that flexural strength and fracture toughness were significantly greater for PMMA specimens that incorporated silica than for the other specimens. All additives prolonged the time taken to reach maximum curing temperature and significantly improved cell adhesion of the PMMA samples. The results of this study could be useful for improving the union of implant-PMMA or bone-PMMA interfaces by incorporating nanoparticles into PMMA cement for orthopedic and orthodontic applications. PMID:24920906

Effect of additive particles on mechanical, thermal, and cell functioning properties of poly(methyl methacrylate) cement.

PubMed

Khandaker, Morshed; Vaughan, Melville B; Morris, Tracy L; White, Jeremiah J; Meng, Zhaotong

2014-01-01

The most common bone cement material used clinically today for orthopedic surgery is poly(methyl methacrylate) (PMMA). Conventional PMMA bone cement has several mechanical, thermal, and biological disadvantages. To overcome these problems, researchers have investigated combinations of PMMA bone cement and several bioactive particles (micrometers to nanometers in size), such as magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica. A study comparing the effect of these individual additives on the mechanical, thermal, and cell functional properties of PMMA would be important to enable selection of suitable additives and design improved PMMA cement for orthopedic applications. Therefore, the goal of this study was to determine the effect of inclusion of magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica additives in PMMA on the mechanical, thermal, and cell functional performance of PMMA. American Society for Testing and Materials standard three-point bend flexural and fracture tests were conducted to determine the flexural strength, flexural modulus, and fracture toughness of the different PMMA samples. A custom-made temperature measurement system was used to determine maximum curing temperature and the time needed for each PMMA sample to reach its maximum curing temperature. Osteoblast adhesion and proliferation experiments were performed to determine cell viability using the different PMMA cements. We found that flexural strength and fracture toughness were significantly greater for PMMA specimens that incorporated silica than for the other specimens. All additives prolonged the time taken to reach maximum curing temperature and significantly improved cell adhesion of the PMMA samples. The results of this study could be useful for improving the union of implant-PMMA or bone-PMMA interfaces by incorporating nanoparticles into PMMA cement for orthopedic and orthodontic applications.

Peripheral Design of Progressive Addition Lenses and the Lag of Accommodation in Myopes.

PubMed

Schilling, Tim; Ohlendorf, Arne; Varnas, Saulius R; Wahl, Siegfried

2017-07-01

Insufficient accommodative response is assumed to result in myopia progression. We have investigated if the accommodative lag in myopes is different between a single vision lens (SVL) and the progressive addition lens PAL 2, clinically trialled for its ability to reduce progression of myopia, and if there exist differences in accommodative lag between PAL 2 and other PALs with the same addition power (+1.50 D). The influence of spherical SVL and four different designs of PALs that differ in the near zone width (PAL 1) or that have different signs and magnitude of horizontal gradients of mean power adjacent to their near vision zones (PAL 3 and PAL 4) on the accommodative response was investigated for different near viewing distances (40, 33, and 25 cm) in 31 subjects, aged 18 to 25 years. The SVL correction resulted in insufficient accommodative response for the near object viewing distances tested. PAL 2 did significantly reduce accommodative lag for all near object distances tested. The PAL design with a more negative horizontal mean power gradient (PAL 4) provided a lower lag of accommodation when compared with PAL 2 at the shortest object distance of 25 cm (P = 0.03) and was able to reduce the lag of accommodation to a level below the depth of focus for the higher near working distances tested. Designs of PAL with more negative horizontal mean power gradients are the most effective in lowering the lag of accommodation in myopes. This could make them good test candidates for myopia control applications.

Significant plant growth stimulation by composted as opposed to untreated Biochar

NASA Astrophysics Data System (ADS)

Kammann, Claudia; Messerschmidt, Nicole; Müller, Christoph; Steffens, Diedrich; Schmidt, Hans-Peter; Koyro, Hans-Werner

2013-04-01

The application of production-fresh, untreated biochar does not always result in yield improvements, in particular in temperate or boreal soils. Therefore the use of biochar for soil C sequestration, although desirable from a global change mitigation point of view, may never be implemented without proven and economically feasible pathways for biochar effects in agriculture. To investigate earlier reports of the beneficial effects of composting biochar (e.g. Fischer & Glaser, 2012) we conducted a fully replicated (n=3, +/- biochar) large-scale composting study at the Delinat Institute in Arbaz, Switzerland. The materials were manures (bovine, horse and chicken), straw, stone meal and composting was performed with our without +20 vol.% of a woody biochar (German Charcoal GmbH). Interestingly, the rotting temperature was significantly higher in the biochar-compost while C and N were retained to a certain extent. To investigate the effect of composting ("ageing") on biochar effects, a completely randomized full-factorial pot study was carried out in the greenhouse using the pseudo-cereal Chenopodium quinoa. The three factors used in the study were (I) type of biochar addition ("aged", "fresh", or zero BC), (II) addition of compost and (III) low and high application rates of a full NPK-fertilizer (equivalent to 28 and 140 kg N ha-1, NPK + micronutrients) in several doses. The growth medium was a poor loamy sand. Biochars and compost were all added at a rate of 2% (w/w) to the soil. From the start there was a considerable difference between the growth of Quinoa with the fresh compared to the aged biochar. The fresh biochar produced the well-known reduction in plant growth compared to the unamended control. This reduction was alleviated to a certain extent by the addition of either compost and/or increased fertilization. In contrast the co-composted biochar always resulted in a highly significant stimulation of the Quinoa yield (roots, shoots, inflorescences). This

Impact of Solubilizing Additives on Supersaturation and Membrane Transport of Drugs.

PubMed

Raina, Shweta A; Zhang, Geoff G Z; Alonzo, David E; Wu, Jianwei; Zhu, Donghua; Catron, Nathaniel D; Gao, Yi; Taylor, Lynne S

2015-10-01

Many enabling formulations give rise to supersaturated solutions wherein the solute possesses higher thermodynamic activity gradients than the solute in a saturated solution. Since flux across a membrane is driven by solute activity rather than concentration, understanding how solute thermodynamic activity varies with solution composition, particularly in the presence of solubilizing additives, is important in the context of passive absorption. In this study, a side-by-side diffusion cell was used to evaluate solute flux for solutions of nifedipine and felodipine in the absence and presence of different solubilizing additives at various solute concentrations. At a given solute concentration above the equilibrium solubility, it was observed that the solubilizing additives could reduce the membrane flux, indicating that the extent of supersaturation can be reduced. However, the flux could be increased back to the same maximum value (which was determined by the concentration where liquid-liquid phase separation (LLPS) occurred) by increasing the total solute concentration. Qualitatively, the shape of the curves of solute flux through membrane as a function of total solute concentration is the same in the absence and presence of solubilizing additives. Quantitatively, however, LLPS occurs at higher solute concentrations in the presence of solubilizing additives. Moreover, the ratios of the LLPS onset concentration and equilibrium solubility vary significantly in the absence and presence of additives. These findings clearly point out the flaws in using solute concentration in estimating solute activity or supersaturation, and reaffirm the use of flux measurements to understand supersaturated systems. Clear differentiation between solubilization and supersaturation, as well as thorough understanding of their respective impacts on membrane transport kinetics is important for the rational design of enabling formulations for poorly soluble compounds.

Simulated families: A test for different methods of family identification

NASA Technical Reports Server (NTRS)

Bendjoya, Philippe; Cellino, Alberto; Froeschle, Claude; Zappala, Vincenzo

1992-01-01

A set of families generated in fictitious impact events (leading to a wide range of 'structure' in the orbital element space have been superimposed to various backgrounds of different densities in order to investigate the efficiency and the limitations of the methods used by Zappala et al. (1990) and by Bendjoya et al. (1990) for identifying asteroid families. In addition, an evaluation of the expected interlopers at different significance levels and the possibility of improving the definition of the level of maximum significant of a given family were analyzed.

Expression of Hsp70 reveals significant differences between fin regeneration and inflammation in Paramisgurnus dabryanus.

PubMed

Li, Li; Wang, Linlin; He, Jingya; Chang, Zhongjie

2017-05-01

Hsp70 is the most strongly induced in response to various cellular stresses and a good candidate for investigating its role in tissue injury. We firstly cloned full-length cDNA of hsp70 from Paramisgurnus dabryanus (PdHsp70) by RACE method (GenBank: KP402408.1). Then regeneration and inflammation of fin were established by amputation and scratch respectively. Quantitative RT-PCR detected the PdHsp70 began to increase rapidly its expression at 1 days post amputation (dpa) and reached the peak at 2 dpa during fin regeneration. Its expression was also up-regulated at 2 days post scratch (dps) of inflammation but still significant weaker in comparison with it in regenerated fin at 2 dpa. Next, immunohistochemistry analysis of PdHsp70 showed that PdHsp70 located mainly in the deeper epidermis of regenerated fin and was stronger than its expression in the scratched inflammatory fin which was involved in whole epidermal. SDS-PAGE and Western blotting confirmed that the PdHsp70 protein expressed efficiently in Escherichia coli BL21. These findings have implied that PdHsp70 are implicated in different regulation of regeneration and inflammation in response to injury stimulation. During the regeneration, it is involved in the formation of wound epidermis by mediating cellular protection whereas it can modulate inflammatory by activating the innate immune response. Copyright © 2017. Published by Elsevier Ltd.

Sodium alginate as feed additive in cultured sea bream (Sparus aurata): does it modify the quality of the flesh?

PubMed

Peso-Echarri, P; Frontela-Saseta, C; Santaella-Pascual, M; García-Alcázar, A; Abdel, I; Ros-Berruezo, G; Martínez-Graciá, C

2012-11-15

The objective of this study was to evaluate the effect of sodium alginate obtained from brown seaweed as a prebiotic supplement to the feed of reared sea bream (Sparus aurata). Addition of the alginate to a control diet was investigated at both concentrations 2% and 5%. Proximate composition in the flesh were not modified significantly by sodium alginate inclusion in the diet of the sea bream; however the fat and ash content in the specimens supplemented with 5% alginate were found to be significantly higher than those found in individuals who were fed the control diet. No significant differences in mineral content, fatty acid profiles, cholesterol content, texture parameters and sensory acceptability among the three studied groups. Results obtained in this study offer support for the use of alginate as a feed additive in sea bream diets since no significant effects were found in the flesh quality and characteristics of commercial size sea bream. Copyright © 2012 Elsevier Ltd. All rights reserved.

A sensitometric evaluation of a dental radiographic developer additive.

PubMed

Price, C

1982-04-01

The efficacy of a commercially available developer additive was investigated by a sensitometric method. The effects of the additive on two different manual developing solutions were evaluated immediately after mixing and at intervals of 5, 10, and 15 weeks. An automatic film processor was used to process control radiographs. Under the conditions of this investigation, no advantages were demonstrated following the use of the additive.

Anaerobic sludge digestion with a biocatalytic additive

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghosh, S.; Henry, M.P.; Fedde, P.A.

1982-01-01

The objective of this research was to evaluate the effects of a lactobacillus additive an anaerobic sludge digestion under normal, variable, and overload operating conditions. The additive was a whey fermentation product of an acid-tolerant strain of Lactobacillus acidophilus fortified with CaCO/sub 3/, (NH/sub 4/)/sub 2/HPO/sub 4/, ferrous lactate, and lactic acid. The lactobacillus additive is multifunctional in nature and provides growth factors, metabolic intermediates, and enzymes needed for substrate degradation and cellular synthesis. The experimental work consisted of several pairs of parallel mesophilic (35/sup 0/C) digestion runs (control and test) conducted in five experimental phases. Baseline runs without themore » additive showed that the two experimental digesters had the same methane content, gas production rate (GPR), and ethane yield. The effect of the additive was to increase methane yield and GPR by about 5% (which was statistically significant) during digester operation at a loading rate (LR) of 3.2 kg VS/m/sup 3/-day and a hydraulic retention time (HRT) of 14 days. Data collected from the various experimental phases showed that the biochemical additive increased methane yield, gas production rate, and VS reduction, and decreased volatile acids accumulation. In addition, it enhanced digester buffer capacity and improved the fertilizer value and dewatering characteristics of the digested residue.« less

Kinetic studies of retinol addition radicals.

PubMed

El-Agamey, Ali; Fukuzumi, Shunichi; Naqvi, K Razi; McGarvey, David J

2011-03-07

Retinol neutral radicals (RS-retinol˙), generated from the reaction of retinol with 4-pyridylthiyl and 2-pyridylthiyl radicals in argon-saturated methanol, undergo β-elimination, which can be monitored via the slow secondary absorption rise at 380 nm attributed to the rearrangement of the unstable retinol neutral addition radicals to the more stable addition radicals. Rate constants for the β-elimination reactions (k(β)) of 4-PyrS-retinol˙ were measured at different temperatures and the Arrhenius equation for the reaction is described by log (k(β)/s(-1)) = (12.7 ± 0.2) - (54.3 ± 1.3)/θ, where θ = 2.3RT kJ mol(-1). The reactivities of retinol addition radicals (RS-retinol˙), generated from the reaction of retinol with various thiyl radicals, towards oxygen have also been investigated in methanol. In the presence of oxygen, the decay of RS-retinol˙ fits to biexponential kinetics and both observed rate constants for the RS-retinol˙ decay are oxygen-concentration dependent. This suggests that at least two thiyl addition radicals, formed from the reaction of RS˙ with retinol, undergo oxygen addition reactions. In light of the estimated rate constants for oxygen addition to RS-retinol˙ and RS-CAR˙ (CAR: carotenoid), the antioxidant-prooxidant properties of retinol are discussed.

Reducing Communication in Algebraic Multigrid Using Additive Variants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vassilevski, Panayot S.; Yang, Ulrike Meier

Algebraic multigrid (AMG) has proven to be an effective scalable solver on many high performance computers. However, its increasing communication complexity on coarser levels has shown to seriously impact its performance on computers with high communication cost. Moreover, additive AMG variants provide not only increased parallelism as well as decreased numbers of messages per cycle but also generally exhibit slower convergence. Here we present various new additive variants with convergence rates that are significantly improved compared to the classical additive algebraic multigrid method and investigate their potential for decreased communication, and improved communication-computation overlap, features that are essential for goodmore » performance on future exascale architectures.« less

Reducing Communication in Algebraic Multigrid Using Additive Variants

DOE PAGES

Vassilevski, Panayot S.; Yang, Ulrike Meier

2014-02-12

Algebraic multigrid (AMG) has proven to be an effective scalable solver on many high performance computers. However, its increasing communication complexity on coarser levels has shown to seriously impact its performance on computers with high communication cost. Moreover, additive AMG variants provide not only increased parallelism as well as decreased numbers of messages per cycle but also generally exhibit slower convergence. Here we present various new additive variants with convergence rates that are significantly improved compared to the classical additive algebraic multigrid method and investigate their potential for decreased communication, and improved communication-computation overlap, features that are essential for goodmore » performance on future exascale architectures.« less

The positive effects of different platelet-rich plasma methods on human muscle, bone, and tendon cells.

PubMed

Mazzocca, Augustus D; McCarthy, Mary Beth R; Chowaniec, David M; Dugdale, Evan M; Hansen, Derek; Cote, Mark P; Bradley, James P; Romeo, Anthony A; Arciero, Robert A; Beitzel, Knut

2012-08-01

Clinical application of platelet-rich plasma (PRP) in the realm of orthopaedic sports medicine has yielded variable results. Differences in separation methods and variability of the individual may contribute to these variable results. To compare the effects of different PRP separation methods on human bone, muscle, and tendon cells in an in vitro model. Controlled laboratory study. Blood collected from 8 participants (mean ± SD age 31.6 ± 10.9 years) was used to obtain PRP preparations. Three different PRP separation methods were used: a single-spin process yielding a lower platelet concentration (PRP(LP)), a single-spin process yielding high platelet and white blood cell concentrations (PRP(HP)), and a double-spin that produces a higher platelet concentration and lower white blood cell concentration (PRP(DS)). Human bone, muscle, and tendon cells obtained from discarded tissue samples during shoulder surgery were placed into culture and treated with the 3 PRP preparations, control media (2% fetal bovine serum [FBS] and 10% FBS), and native blood. Radioactive thymidine assays were obtained to examine cell proliferation, and testing with enzyme-linked immunosorbent assay was used to determine growth factor concentrations. Addition of PRP(LP) to osteocytes, myocytes, and tenocytes significantly increased cell proliferation (P ≤ .05) compared with the controls. Adding PRP(DS) to osteoblasts and tenocytes increased cell proliferation significantly (P ≤ .05), but no significance was shown for its addition to myocytes. The addition of PRP(HP) significantly increased cell proliferation compared with the controls only when added to tenocytes (P ≤ .05). Osteoblasts: Proliferation was significantly increased by addition of PRP(LP) compared with all controls (2% FBS, 10% FBS, native blood) (P ≤ .05). Addition of PRP(DS) led to significantly increased proliferation compared with all controls, native blood, and PRP(HP) (P ≤ .05). Proliferation was significantly less

Surface modification of biomaterials and biomedical devices using additive manufacturing.

PubMed

Bose, Susmita; Robertson, Samuel Ford; Bandyopadhyay, Amit

2018-01-15

The demand for synthetic biomaterials in medical devices, pharmaceutical products and, tissue replacement applications are growing steadily due to aging population worldwide. The use for patient matched devices is also increasing due to availability and integration of new technologies. Applications of additive manufacturing (AM) or 3D printing (3DP) in biomaterials have also increased significantly over the past decade towards traditional as well as innovative next generation Class I, II and III devices. In this review, we have focused our attention towards the use of AM in surface modified biomaterials to enhance their in vitro and in vivo performances. Specifically, we have discussed the use of AM to deliberately modify the surfaces of different classes of biomaterials with spatial specificity in a single manufacturing process as well as commented on the future outlook towards surface modification using AM. It is widely understood that the success of implanted medical devices depends largely on favorable material-tissue interactions. Additive manufacturing has gained traction as a viable and unique approach to engineered biomaterials, for both bulk and surface properties that improve implant outcomes. This review explores how additive manufacturing techniques have been and can be used to augment the surfaces of biomedical devices for direct clinical applications. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Characterizing Health Information for Different Target Audiences.

PubMed

Sun, Yueping; Hou, Zhen; Hou, Li; Li, Jiao

2015-01-01

Different groups of audiences in health care: health professionals and health consumers, each have different information needs. Health monographs targeting different audiences are created by leveraging readers' background knowledge. The NCI's Physician Data Query (PDQ®) Cancer Information Summaries provide parallel cancer information and education resources with different target audiences. In this paper, we used targeted audience-specific cancer information PDQs to measure characteristic differences on the element level between audiences. In addition, we compared vocabulary coverage. Results show a significant difference between the professional and patient version of cancer monographs in both content organization and vocabulary. This study provides a new view to assess targeted audience-specific health information, and helps editors to improve the quality and readability of health information.

Base Stabilization Guidance and Additive Selection for Pavement Design and Rehabilitation

DOT National Transportation Integrated Search

2017-12-01

Significant improvements have been made in base stabilization practice that include design specifications and methodology, experience with the selection of stabilizing additives, and equipment for distribution and uniform blending of additives. For t...

Expression differences in Aphidius ervi (Hymenoptera: Braconidae) females reared on different aphid host species

PubMed Central

Legeai, Fabrice; Gonzalez-Gonzalez, Angelica; Lavandero, Blas; Simon, Jean-Christophe

2017-01-01

The molecular mechanisms that allow generalist parasitoids to exploit many, often very distinct hosts are practically unknown. The wasp Aphidius ervi, a generalist koinobiont parasitoid of aphids, was introduced from Europe into Chile in the late 1970s to control agriculturally important aphid species. A recent study showed significant differences in host preference and host acceptance (infectivity) depending on the host A. ervi were reared on. In contrast, no genetic differentiation between A. ervi populations parasitizing different aphid species and aphids of the same species reared on different host plants was found in Chile. Additionally, the same study did not find any fitness effects in A. ervi if offspring were reared on a different host as their mothers. Here, we determined the effect of aphid host species (Sitobion avenae versus Acyrthosiphon pisum reared on two different host plants alfalfa and pea) on the transcriptome of adult A. ervi females. We found a large number of differentially expressed genes (between host species: head: 2,765; body: 1,216; within the same aphid host species reared on different host plants: alfalfa versus pea: head 593; body 222). As expected, the transcriptomes from parasitoids reared on the same host species (pea aphid) but originating from different host plants (pea versus alfalfa) were more similar to each other than the transcriptomes of parasitoids reared on a different aphid host and host plant (head: 648 and 1,524 transcripts; body: 566 and 428 transcripts). We found several differentially expressed odorant binding proteins and olfactory receptor proteins in particular, when we compared parasitoids from different host species. Additionally, we found differentially expressed genes involved in neuronal growth and development as well as signaling pathways. These results point towards a significant rewiring of the transcriptome of A. ervi depending on aphid-plant complex where parasitoids develop, even if different biotypes

Additive-Free Transparent Triarylamine-Based Polymeric Hole-Transport Materials for Stable Perovskite Solar Cells.

PubMed

Matsui, Taisuke; Petrikyte, Ieva; Malinauskas, Tadas; Domanski, Konrad; Daskeviciene, Maryte; Steponaitis, Matas; Gratia, Paul; Tress, Wolfgang; Correa-Baena, Juan-Pablo; Abate, Antonio; Hagfeldt, Anders; Grätzel, Michael; Nazeeruddin, Mohammad Khaja; Getautis, Vytautas; Saliba, Michael

2016-09-22

Triarylamine-based polymers with different functional groups were synthetized as hole-transport materials (HTMs) for perovskite solar cells (PSCs). The novel materials enabled efficient PSCs without the use of chemical doping (or additives) to enhance charge transport. Devices employing poly(triarylamine) with methylphenylethenyl functional groups (V873) showed a power conversion efficiency of 12.3 %, whereas widely used additive-free poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) demonstrated 10.8 %. Notably, devices with V873 enabled stable PSCs under 1 sun illumination at maximum power point tracking for approximately 40 h at room temperature, and in the dark under elevated temperature (85 °C) for more than 140 h. This is in stark contrast to additive-containing devices, which degrade significantly within the same time frame. The results present remarkable progress towards stable PSC under real working conditions and industrial stress tests. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effects of Zr Addition on Strengthening Mechanisms of Al-Alloyed High-Cr ODS Steels.

PubMed

Ren, Jian; Yu, Liming; Liu, Yongchang; Liu, Chenxi; Li, Huijun; Wu, Jiefeng

2018-01-12

Oxide dispersion strengthened (ODS) steels with different contents of zirconium (denoted as 16Cr ODS, 16Cr-0.3Zr ODS and 16Cr-0.6Zr ODS) were fabricated to investigate the effects of Zr on strengthening mechanism of Al-alloyed 16Cr ODS steel. Electron backscatter diffraction (EBSD) results show that the mean grain size of ODS steels could be decreased by Zr addition. Transmission electron microscope (TEM) results indicate that Zr addition could increase the number density but decrease the mean diameter and inter-particle spacing of oxide particles. Furthermore, it is also found that in addition to Y-Al-O nanoparticles, Y-Zr-O oxides with finer size were observed in 16Cr-0.3Zr ODS and 16Cr-0.6Zr ODS steels. These changes in microstructure significantly increase the yield strength (YS) and ultimate tensile strength (UTS) of ODS steels through mechanisms of grain boundary strengthening and dispersion strengthening.

Effects of Zr Addition on Strengthening Mechanisms of Al-Alloyed High-Cr ODS Steels

PubMed Central

Ren, Jian; Yu, Liming; Liu, Yongchang; Liu, Chenxi; Li, Huijun; Wu, Jiefeng

2018-01-01

Oxide dispersion strengthened (ODS) steels with different contents of zirconium (denoted as 16Cr ODS, 16Cr-0.3Zr ODS and 16Cr-0.6Zr ODS) were fabricated to investigate the effects of Zr on strengthening mechanism of Al-alloyed 16Cr ODS steel. Electron backscatter diffraction (EBSD) results show that the mean grain size of ODS steels could be decreased by Zr addition. Transmission electron microscope (TEM) results indicate that Zr addition could increase the number density but decrease the mean diameter and inter-particle spacing of oxide particles. Furthermore, it is also found that in addition to Y-Al-O nanoparticles, Y-Zr-O oxides with finer size were observed in 16Cr-0.3Zr ODS and 16Cr-0.6Zr ODS steels. These changes in microstructure significantly increase the yield strength (YS) and ultimate tensile strength (UTS) of ODS steels through mechanisms of grain boundary strengthening and dispersion strengthening. PMID:29329260

Significances of Multimedia Technologies Training

NASA Astrophysics Data System (ADS)

Zhang, Fulei

The use of multimedia technologies in education has enabled teachers to simulate final outcomes and assist s-tudents in applying knowledge learned from textbooks, thereby compensating for the deficiency of traditional teach- ing methods. It is important to examine how effective these technologies are in practical use. This study developed online learning-teaching resource platforms using Flash multimedia, providing interactive and integrated features in an easy-to-use user interface, in order to discuss Computer-Aided Drawing (CAD). The study utilized a teaching experiment with a non-equivalent pretest-posttest control group design to test and discuss students' professional cognition, operating skill cognition, and level of learning satisfaction during the learning process. No significant differences emerged between the groups in regards to professional cognition or operation skills cognition. However, a significant difference in learning satisfaction was noted, indicating that the coursework with multimedia Flash produced greater satisfaction than with traditional learning methods. Results are explained in detail and recommendations for further research provided.

Effects of Litter and Nutrient Additions on Soil Carbon Cycling in a Tropical Forest

NASA Astrophysics Data System (ADS)

Cusack, D. F.; Halterman, S.; Turner, B. L.; Tanner, E.; Wright, S. J.

2014-12-01

Soil carbon (C) dynamics present one of the largest sources of uncertainty in global C cycle models, with tropical forest soils containing some of the largest terrestrial C stocks. Drastic changes in soil C storage and loss are likely to occur if global change alters plant net primary production (NPP) and/or nutrient availability in these ecosystems. We assessed the effects of litter removal and addition, as well as fertilization with nitrogen (N), phosphorus (P), and/or potassium (K), on soil C stocks in a tropical seasonal forest in Panama after ten and sixteen years, respectively. We used a density fractionation scheme to assess manipulation effects on rapidly and slowly cycling pools of C. Soil samples were collected in the wet and dry seasons from 0-5 cm and 5-10 cm depths in 15- 45x45 m plots with litter removal, 2x litter addition, and control (n=5), and from 32- 40x40 m fertilization plots with factorial additions of N, P, and K. We hypothesized that litter addition would increase all soil C fractions, but that the magnitude of the effect on rapidly-cycling C would be dampened by a fertilization effect. Results for the dry season show that the "free light" C fraction, or rapidly cycling soil C pool, was significantly different among the three litter treatments, comprising 5.1 ± 0.9 % of total soil mass in the litter addition plots, 2.7 ± 0.3 % in control plots, and 1.0 ± 0.1 % in litter removal plots at the 0-5cm depth (means ± one standard error, p < 0.05). Bulk soil C results are similar to observed changes in the rapidly cycling C pool for the litter addition and removal. Fertilization treatments on average diminished this C pool size relative to control plots, although there was substantial variability among fertilization treatments. In particular, addition of N and P together did not significantly alter rapidly cycling C pool sizes (4.1 ± 1.2 % of total soil mass) relative to controls (3.5 ± 0.4 %), whereas addition of P alone resulted in

Prostate cancer risk: the significance of differences in age related changes in serum conjugated and unconjugated steroid hormone concentrations between Arab and Caucasian men.

PubMed

Kehinde, E O; Akanji, A O; Memon, A; Bashir, A A; Daar, A S; Al-Awadi, K A; Fatinikun, T

2006-01-01

Factors responsible for the low incidence of clinical prostate cancer (3-8/100,000 men/year) in the Arab population remain unclear, but may be related to changes in steroid hormone metabolism. We compared the levels of serum conjugated and unconjugated steroids between Arab and Caucasian populations, to determine if these can provide a rational explanation for differences in incidence of prostate cancer between the two populations. Venous blood samples were obtained from 329 unselected apparently healthy indigenous Arab men (Kuwaitis and Omanis) aged 15-80 years. Samples were also obtained from similar Arab men with newly diagnosed prostate cancer or benign prostatic hyperplasia (BPH). The samples were taken between 8:00 am and 12:00 noon. Serum levels of total testosterone, (TT), sex hormone binding globulin (SHBG), free androgen index (FAI); adrenal C19-steroids, dehydroepiandrosterone sulphate (DHEAS) and androstenedione (ADT) were determined using Immulite kits (Diagnostic Systems Laboratories Inc, Webster Texas, USA). The results obtained in Arab men were compared with those reported for similarly aged Chinese, German and White USA men. In all four ethnic groups, median TT and FAI declined with age, while SHBG increased with age. However, the mean TT and SHBG was significantly lower (p < 0.01) and the FAI significantly higher in Arab men (p < 0.01) compared to German men only in 21-30 years age group. In the other age groups the levels of TT and SHBG were higher in the Germans but the differences were not statistically significant. In all the racial groups serum levels of DHEAS and ADT reached a peak by about 20 years of life, and then declined progressively. The mean DHEAS in American Caucasians aged 20-29 years was 11.4 micromol/l compared to 6.22 micromol/l in the Arabs (p < 0.001). The mean DHEAS in USA Caucasians aged 70-79 years was 2.5 micromol/l compared to 1.8 micromol/l (p < 0.03) in the Arabs. There was no significant difference in mean serum levels

Utilization of curve offsets in additive manufacturing

NASA Astrophysics Data System (ADS)

Haseltalab, Vahid; Yaman, Ulas; Dolen, Melik

2018-05-01

Curve offsets are utilized in different fields of engineering and science. Additive manufacturing, which lately becomes an explicit requirement in manufacturing industry, utilizes curve offsets widely. One of the necessities of offsetting is for scaling which is required if there is shrinkage after the fabrication or if the surface quality of the resulting part is unacceptable. Therefore, some post-processing is indispensable. But the major application of curve offsets in additive manufacturing processes is for generating head trajectories. In a point-wise AM process, a correct tool-path in each layer can reduce lots of costs and increase the surface quality of the fabricated parts. In this study, different curve offset generation algorithms are analyzed to show their capabilities and disadvantages through some test cases and improvements on their drawbacks are suggested.

No Significant Difference in Service Learning Online

ERIC Educational Resources Information Center

McGorry, Sue Y.

2012-01-01

Institutions of higher education are realizing the importance of service learning initiatives in developing awareness of students' civic responsibilities, leadership and management skills, and social responsibility. These skills and responsibilities are the foundation of program outcomes in accredited higher education business programs at…

Making a Significant Difference with Institutional Research.

ERIC Educational Resources Information Center

Clagett, Craig A.; Huntington, Robin B.

Focusing on the changing roles of institutional researchers (IRs) due to the widespread distribution of computer technology, this monograph explores the effective application of IR skills to maximize the impact of research on campus policy making. The discussion is centered around three major principles guiding institutional research: know the…

Improvements in floating point addition/subtraction operations

DOEpatents

Farmwald, P.M.

1984-02-24

Apparatus is described for decreasing the latency time associated with floating point addition and subtraction in a computer, using a novel bifurcated, pre-normalization/post-normalization approach that distinguishes between differences of floating point exponents.

Methylamphetamine synthesized from cold medication as precursor source via two different routes show significantly different stable isotope signatures

NASA Astrophysics Data System (ADS)

Jayaram, S.; Daeid, N. Nic; Kerr, W. J.; Kemp, H. F.; Meier-Augenstein, W.

2012-04-01

This work exposes the variation in light element stable isotopic abundance values of 13C, 2H and 15N) derived from the analysis of methylamphetamine synthesized via 2 different synthetic routes popular with clandestine laboraties, the Hypophosphorous and the Moscow route. We repeatedly prepared the final product using known clandestine synthetic methods where the precursors, catalysts and reducing agents have themselves been derived from house hold products and commonly available cold medications. Methylamphetamine was prepared from both lab grade pseudoephedrine and pseudoephedrine extracted (using three different solvent systems) from Sudafed®, an over-the-counter cold medication widely available in the United Kingdom. Six repetitive batches of the final product were produced in each case to provide within and between batch variations thus yielding a total of 48 samples (24 for each route). We have demonstrated that stable isotope analysis by Isotope Ratio Mass Spectrometry (IRMS) is potentially useful in the comparison and discrimination of batches of methylamphetamine produced for each route and for each precursor depending on the solvent used for extracting the pseudoephedrine starting material. To our knowledge this is the first time multivariate stable isotope analysis has been applied to methylamphetamine samples synthesized from pseudoephedrine extracted from over-the-counter cold medications.

Additives for cement compositions based on modified peat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kopanitsa, Natalya, E-mail: kopanitsa@mail.ru; Sarkisov, Yurij, E-mail: sarkisov@tsuab.ru; Gorshkova, Aleksandra, E-mail: kasatkina.alexandra@gmail.com

High quality competitive dry building mixes require modifying additives for various purposes to be included in their composition. There is insufficient amount of quality additives having stable properties for controlling the properties of cement compositions produced in Russia. Using of foreign modifying additives leads to significant increasing of the final cost of the product. The cost of imported modifiers in the composition of the dry building mixes can be up to 90% of the material cost, depending on the composition complexity. Thus, the problem of import substitution becomes relevant, especially in recent years, due to difficult economic situation. The articlemore » discusses the possibility of using local raw materials as a basis for obtaining dry building mixtures components. The properties of organo-mineral additives for cement compositions based on thermally modified peat raw materials are studied. Studies of the structure and composition of the additives are carried out by physicochemical research methods: electron microscopy and X-ray analysis. Results of experimental research showed that the peat additives contribute to improving of cement-sand mortar strength and hydrophysical properties.« less

Improvement of silicone rubber properties by addition of nano-SiO2 particles.

PubMed

Wu, Lianfeng; Wang, Xianming; Ning, Liang; Han, Jianjun; Wan, Zhong; Lu, Min

2016-07-04

To improve the comprehensive performances of a one-part room temperature vulcanized silicone rubber(RTV-1 SiR), Nano-SiO2 particles are employed as the reinforcing agent. The SiO2/RTV-1 SiR composite is prepared using PDMS, ND42, D-60 and HMDS-modified SiO2 particles by mixing method. And then, the mechanical and electrical properties, including shear strength, tensile strength, hardness Shore A and volume resistivity, are investigated using experimental method. The addition of nano-SiO2 particles can improve the properties of the SiO2/RTV-1 SiR composite in different degrees. And, the incorporation of 25~30 phr nano-SiO2 particles is found to be reasonable for silicone rubber composite with the best comprehensive performances. The significant improvement of mechanical properties and electrical insulation of SiO2 may be contributed to the addition of modified nano-SiO2 particles. Additionally, the excellent comprehensive performances of SiO2/RTV-1 SiR composite guarantee a potential applications as electrical-insulating adhesives.

78 FR 9997 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-12

... the President to impose sanctions against significant foreign narcotics traffickers and their... controlled by significant foreign narcotics traffickers as identified by the President. In addition, the..., Rio Grande, Zacatecas 98400, Mexico; Matamoros, Tamaulipas, Mexico; Rio Grande, Zacatecas, Mexico; DOB...

Effect of Alum Additions to Poultry Litter on In-House Ammonia and Greenhouse Gas Concentrations and Emissions.

PubMed

Eugene, Branly; Moore, Philip A; Li, Hong; Miles, Dana; Trabue, Steven; Burns, Robert; Buser, Michael

2015-09-01

Alum [Al(SO4) ·14HO] addition to poultry litter has been shown to reduce ammonia (NH) concentrations in poultry houses; however, its effects on greenhouse gas (GHG; NO, CH, and CO) emissions is unknown. The objectives of this study were to determine the effects of alum additions on (i) in-house NH and GHG concentrations, (ii) NH and GHG emissions, and (iii) litter chemical properties. Two identical broiler houses located in northwest Arkansas were used for this study: one house was a control and the other was treated with alum between each flock of birds. Ventilation rates were coupled with in-house NH and GHG measurements to determine emission rates. Overall, alum additions significantly reduced the daily average in-house NH concentration by 42% (8.9 vs. 15.4 μL L), and the overall NH emission rate was reduced by 47% (7.2 vs. 13.4 kg d house). The average cumulative NH emission for the three flocks was 330 kg house flock for the alum-treated house and 617 kg house flock for the control. Concentrations and emissions of nitrous oxide (NO) and methane (CH) from the alum-treated house were not significantly different than the untreated house. However, carbon dioxide (CO) emissions were significantly higher from the untreated house than the alum-treated house. Alum also significantly increased litter N content and reduced the C/N ratio. These results indicate that the addition of alum to poultry litter is not only an effective management practice for reducing in-house NH concentrations and emissions but also significantly reduces CO emissions from poultry facilities. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

High-Price And Low-Price Physician Practices Do Not Differ Significantly On Care Quality Or Efficiency

PubMed Central

Roberts, Eric T.; Mehrotra, Ateev; McWilliams, J. Michael

2017-01-01

Provider consolidation has intensified concerns that providers with market power may be able to charge higher prices without having to deliver better care. Providers have argued that higher prices cover the costs of delivering higher-quality care. We examined the relationship between physician practice prices for outpatient services and the quality and efficiency of care provided to their patients. Using commercial claims, we classified practices as high-priced or low-priced. We compared care quality, utilization, and spending between high-priced and low-priced practices in the same areas using data from the Consumer Assessment of Health Care Providers and Systems survey and linked claims for Medicare beneficiaries. Compared with low-priced practices, high-priced practices were much larger and received 36% higher prices. Patients of high-priced practices reported significantly higher scores on some measures of care coordination and management, but did not differ meaningfully in their overall care ratings, other domains of patient experiences (including physician ratings and access to care), receipt of mammography, vaccinations, or diabetes services, acute care use, or total Medicare spending. These findings suggest an overall weak relationship between practices’ prices and the quality and efficiency of care they provide, calling into question claims that high-priced providers deliver substantially higher-value care. PMID:28461352

Micro-x-ray fluorescence, micro-x-ray absorption spectroscopy, and micro-x-ray diffraction investigation of lead speciation after the addition of different phosphorus amendments to a smelter-contaminated soil.