10 CFR 810.14 - Additional information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically authorized...

10 CFR 810.14 - Additional information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically authorized...

10 CFR 810.14 - Additional information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically authorized...

10 CFR 810.14 - Additional information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically authorized...

Information Design Theories

ERIC Educational Resources Information Center

Pettersson, Rune

2014-01-01

Information design has practical and theoretical components. As an academic discipline we may view information design as a combined discipline, a practical theory, or as a theoretical practice. So far information design has incorporated facts, influences, methods, practices, principles, processes, strategies, and tools from a large number of…

16 CFR § 1102.16 - Additional information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest, consistent...

Value-informed space systems design and acquisition

NASA Astrophysics Data System (ADS)

Brathwaite, Joy

-centric approach are identified and discussed. In addition, an innovative approach for characterizing value uncertainty through partial moments, a technique used in finance, is adapted to an engineering context and applied to priced space systems. Partial moments disaggregate uncertainty into upside potential and downside risk, and as such, they provide the decision-maker with additional insights for value-uncertainty management in design and acquisition. For unpriced space systems, this research first posits that their value derives from, and can be assessed through, the value of information they provide. To this effect, a Bayesian framework is created to assess system value in which the system is viewed as an information provider and the stakeholder an information recipient. Information has value to stakeholders as it changes their rational beliefs enabling them to yield higher expected pay-offs. Based on this marginal increase in expected pay-offs, a new metric, Value-of-Design (VoD), is introduced to quantify the unpriced system’s value. The Bayesian framework is applied to the case of an Earth Science satellite that provides hurricane information to oil rig operators using nested Monte Carlo modeling and simulation. Probability models of stakeholders’ beliefs, and economic models of pay-offs are developed and integrated with a spacecraft payload generation tool. The case study investigates the information value generated by each payload, with results pointing to clusters of payload instruments that yielded higher information value, and minimum information thresholds below which it is difficult to justify the acquisition of the system. In addition, an analytical decision tool, probabilistic Pareto fronts, is developed in the Cost-VoD trade space to provide the decision-maker with additional insights into the coupling of a system's probable value generation and its associated cost risk.

43 CFR 3430.4-2 - Additional information.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Additional information. 3430.4-2 Section... Leases § 3430.4-2 Additional information. (a) If the applicant for a preference right lease has submitted timely, some, but not all of the information required in § 3430.4-1 of this title, the authorized officer...

16 CFR 1102.16 - Additional information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE (Eff. Jan. 10, 2011) Content Requirements... notices, the CPSC shall include in the Database any additional information it determines to be in the...

People-oriented Information Visualization Design

NASA Astrophysics Data System (ADS)

Chen, Zhiyong; Zhang, Bolun

2018-04-01

In the 21st century with rapid development, in the wake of the continuous progress of science and technology, human society enters the information era and the era of big data, and the lifestyle and aesthetic system also change accordingly, so the emerging field of information visualization is increasingly popular. Information visualization design is the process of visualizing all kinds of tedious information data, so as to quickly accept information and save time-cost. Along with the development of the process of information visualization, information design, also becomes hotter and hotter, and emotional design, people-oriented design is an indispensable part of in the design of information. This paper probes information visualization design through emotional analysis of information design based on the social context of people-oriented experience from the perspective of art design. Based on the three levels of emotional information design: instinct level, behavior level and reflective level research, to explore and discuss information visualization design.

Integration of design information

NASA Technical Reports Server (NTRS)

Anderton, G. L.

1980-01-01

The overall concepts of the integrated programs for aerospace-vehicle design (IPAD) from the user's viewpoint are discussed. Also a top-level view of what the user requires from such a system is provided, and the interactions between the system and user are described. The four major components discussed are design process; data storage, management and manipulation; user interface; and project management. Although an outgrowth of aerospace production experience, the basic concepts discussed, and especially their emphasis on integration, are considered applicable to all problem solving. Thus, these concepts may offer a broad base for exploitation by industry in general. This is the first in a set of three papers, the other two being Future Integrated Design Process, by D. D. Mayer, and Requirements for Company-Wide Management of Engineering Information, by J. W. Southall. In addition to tying the three together, how project management can be handled in a computing environment and also the user interface needs are discussed in detail.

49 CFR Appendix A to Part 24 - Additional Information

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Additional Information A Appendix A to Part 24... Information This appendix provides additional information to explain the intent of certain provisions of this... additional information is gathered. If a decision is later made to permanently relocate such persons, those...

10 CFR 1.3 - Sources of additional information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Sources of additional information. 1.3 Section 1.3 Energy NUCLEAR REGULATORY COMMISSION STATEMENT OF ORGANIZATION AND GENERAL INFORMATION Introduction § 1.3 Sources of additional information. (a) A statement of the NRC's organization, policies, procedures...

What Is Information Design?

ERIC Educational Resources Information Center

Redish, Janice C. (Ginny)

2000-01-01

Defines two meanings of information design: the overall process of developing a successful document; and the way the information is presented on the screen (layout, typography, color, and so forth). Discusses the future importance of both of these meanings of information design, in terms of design for the web and single-sources (planning…

40 CFR 141.154 - Required additional health information.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

40 CFR 141.154 - Required additional health information.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

40 CFR 141.154 - Required additional health information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

40 CFR 141.154 - Required additional health information.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

47 CFR 1.10017 - How can I submit additional information?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false How can I submit additional information? 1... International Bureau Filing System § 1.10017 How can I submit additional information? In response to an official request for information from the International Bureau, you can submit additional information...

15 CFR 970.2601 - Additional information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES Miscellaneous § 970.2601 Additional information. Any United States citizen filing notice under § 970.2402 or § 970.2501 of this part...

47 CFR 25.111 - Additional information and ITU cost recovery.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 2 2014-10-01 2014-10-01 false Additional information and ITU cost recovery....111 Additional information and ITU cost recovery. (a) The Commission may request from any party at any time additional information concerning any application, or any other submission or pleading regarding...

Design and fabrication of the progressive addition lenses

NASA Astrophysics Data System (ADS)

Qin, Linling; Qian, Lin; Yu, Jingchi

2011-11-01

The use of progressive addition lenses (PALs) for the correction of presbyopia has increased dramatically in recent years. These lenses are now being used as the preferred alternative to bifocal and trifocal lenses in many parts of the world. Progressive addition lenses are a kind of opthalmic lenses with freeform surface. The surface curvature of the Progressive addition lenses varies gradually from a minimum value in the upper area, to a maximum value in the lower area. Thus a PAL has a surface with three zones which have very small astigmatism: far-view zone, near-view zone, and intermediate zone. The far view zone and near view zone have relatively constant powers and connected by the intermediate zone with power varies progressively. The design and fabrication technologies of progressive addition lenses have fast progresses because of the massive development of the optical simulation software, multi-axis ultraprecision machining technologies and CNC machining technologies. The design principles of progressive addition lenses are discussed in a historic review. Several kinds of design methods are illustrated, and their advantages and disadvantages are also represented. In the current study, it is shown that the optical characteristics of the different progressive addition lenses designs are significantly different from one another. The different fabrication technologies of Progressive addition lenses are also discussed in the paper. Plastic injection molding and precision-machine turning are the common fabrication technologies for exterior PALs and Interior PALs respectively.

SEMIPARAMETRIC ADDITIVE RISKS REGRESSION FOR TWO-STAGE DESIGN SURVIVAL STUDIES

PubMed Central

Li, Gang; Wu, Tong Tong

2011-01-01

In this article we study a semiparametric additive risks model (McKeague and Sasieni (1994)) for two-stage design survival data where accurate information is available only on second stage subjects, a subset of the first stage study. We derive two-stage estimators by combining data from both stages. Large sample inferences are developed. As a by-product, we also obtain asymptotic properties of the single stage estimators of McKeague and Sasieni (1994) when the semiparametric additive risks model is misspecified. The proposed two-stage estimators are shown to be asymptotically more efficient than the second stage estimators. They also demonstrate smaller bias and variance for finite samples. The developed methods are illustrated using small intestine cancer data from the SEER (Surveillance, Epidemiology, and End Results) Program. PMID:21931467

A Modular Aerospike Engine Design Using Additive Manufacturing

NASA Technical Reports Server (NTRS)

Peugeot, John; Garcia, Chance; Burkhardt, Wendel

2014-01-01

A modular aerospike engine concept has been developed with the objective of demonstrating the viability of the aerospike design using additive manufacturing techniques. The aerospike system is a self-compensating design that allows for optimal performance over the entire flight regime and allows for the lowest possible mass vehicle designs. At low altitudes, improvements in Isp can be traded against chamber pressure, staging, and payload. In upper stage applications, expansion ratio and engine envelope can be traded against nozzle efficiency. These features provide flexibility to the System Designer optimizing a complete vehicle stage. The aerospike concept is a good example of a component that has demonstrated improved performance capability, but traditionally has manufacturing requirements that are too expensive and complex to use in a production vehicle. In recent years, additive manufacturing has emerged as a potential method for improving the speed and cost of building geometrically complex components in rocket engines. It offers a reduction in tooling overhead and significant improvements in the integration of the designer and manufacturing method. In addition, the modularity of the engine design provides the ability to perform full scale testing on the combustion devices outside of the full engine configuration. The proposed design uses a hydrocarbon based gas-generator cycle, with plans to take advantage of existing powerhead hardware while focusing DDT&E resources on manufacturing and sub-system testing of the combustion devices. The major risks for the modular aerospike concept lie in the performance of the propellant feed system, the structural integrity of the additive manufactured components, and the aerodynamic efficiency of the exhaust flow.

Homeward Bound: Ecological Design of Domestic Information Systems

NASA Astrophysics Data System (ADS)

Wastell, David G.; Sauer, Juergen S.; Schmeink, Claudia

Information technology artefacts are steadily permeating everyday life, just as they have colonized the business domain. Although research in our field has largely addressed the workplace, researchers are beginning to take an interest in the home environment too. Here, we address the domestic realm, focusing on the design of complex, interactive information systems. As such, our work sits in the design science version rather than behavioral science paradigm of IS research. We argue that the home is in many ways a more challenging environment for the designer than the workplace, making good design of critical importance. Regrettably, the opposite would appear to be the norm. Two experiments are reported, both concerned with the design of the user interface for domestic heating systems. Of note is our use of a medium-fidelity laboratory simulation or "microworld" in this work. Two main substantive findings resulted. First, that ecologically designed feedback, embodying a strong mapping between task goals and system status, produced superior task performance. Second, that predictive decision aids provided clear benefits over other forms of user support, such as advisory systems. General implications for the design of domestic information systems are discussed, followed by reflections on the nature of design work in IS, and on the design science project itself. It is concluded that the microworld approach has considerable potential for developing IS design theory. The methodological challenges of design research are highlighted, especially the presence of additional validity threats posed by the need to construct artefacts in order to evaluate theory. It is argued that design theory is necessarily complex, modal, and uncertain, and that design science (like design itself) should be prosecuted in an open, heuristic spirit, drawing more on the proven methods of "good design" (e.g.,prototyping, user participation) in terms of its own praxis.

24 CFR 1710.116 - Additional information.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Additional information. 1710.116 Section 1710.116 Housing and Urban Development Regulations Relating to Housing and Urban Development... URBAN DEVELOPMENT (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements...

24 CFR 1710.116 - Additional information.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Additional information. 1710.116 Section 1710.116 Housing and Urban Development Regulations Relating to Housing and Urban Development... URBAN DEVELOPMENT (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements...

24 CFR 1710.116 - Additional information.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Additional information. 1710.116 Section 1710.116 Housing and Urban Development Regulations Relating to Housing and Urban Development... URBAN DEVELOPMENT (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements...

24 CFR 1710.116 - Additional information.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Additional information. 1710.116 Section 1710.116 Housing and Urban Development Regulations Relating to Housing and Urban Development... URBAN DEVELOPMENT (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements...

78 FR 70630 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-26

... FURTHER INFORMATION CONTACT: Assistant Director, Sanctions Compliance & Evaluation, Office of Foreign..., a person designated pursuant to the Kingpin Act; or (3) playing a significant role in international...

Fuel characteristics pertinent to the design of aircraft fuel systems, Supplement I : additional information on MIL-F-7914(AER) grade JP-5 fuel and several fuel oils

NASA Technical Reports Server (NTRS)

Barnett, Henry C; Hibbard, Robert R

1953-01-01

Since the release of the first NACA publication on fuel characteristics pertinent to the design of aircraft fuel systems (NACA-RM-E53A21), additional information has become available on MIL-F7914(AER) grade JP-5 fuel and several of the current grades of fuel oils. In order to make this information available to fuel-system designers as quickly as possible, the present report has been prepared as a supplement to NACA-RM-E53A21. Although JP-5 fuel is of greater interest in current fuel-system problems than the fuel oils, the available data are not as extensive. It is believed, however, that the limited data on JP-5 are sufficient to indicate the variations in stocks that the designer must consider under a given fuel specification. The methods used in the preparation and extrapolation of data presented in the tables and figures of this supplement are the same as those used in NACA-RM-E53A21.

2015 Summer Design Challenge: Team A&E (2241) Additively Manufactured Discriminator.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Sarah E.; Moore, Brandon James

Current discriminator designs are based on historical designs and traditional manufacturing methods. The goal of this project was to form non-traditional groups to create novel discriminator designs by taking advantage of additive manufacturing. These designs would expand current discriminator designs and provide insight on the applicability of additive manufacturing for future projects. Our design stretched the current abilities of additive manufacturing and noted desired improvements for the future. Through collaboration with NSC, we noted several additional technologies which work well with additive manufacturing such as topology optimization and CT scanning and determined how these technologies could be improved to bettermore » combine with additive manufacturing.« less

28 CFR 571.72 - Additional designated offenses.

Code of Federal Regulations, 2014 CFR

2014-07-01

... sexual contact with another person without obtaining permission to do so (forcible rape, sexual assault... (Assault) if it includes assault with the intent to commit first degree sexual abuse, second degree sexual... designated offenses. The following offenses are designated as additional sexual offenses for purposes of 18 U...

28 CFR 571.72 - Additional designated offenses.

Code of Federal Regulations, 2013 CFR

2013-07-01

... sexual contact with another person without obtaining permission to do so (forcible rape, sexual assault... (Assault) if it includes assault with the intent to commit first degree sexual abuse, second degree sexual... designated offenses. The following offenses are designated as additional sexual offenses for purposes of 18 U...

28 CFR 571.72 - Additional designated offenses.

Code of Federal Regulations, 2012 CFR

2012-07-01

... sexual contact with another person without obtaining permission to do so (forcible rape, sexual assault... (Assault) if it includes assault with the intent to commit first degree sexual abuse, second degree sexual... designated offenses. The following offenses are designated as additional sexual offenses for purposes of 18 U...

28 CFR 571.72 - Additional designated offenses.

Code of Federal Regulations, 2011 CFR

2011-07-01

... sexual contact with another person without obtaining permission to do so (forcible rape, sexual assault... (Assault) if it includes assault with the intent to commit first degree sexual abuse, second degree sexual... designated offenses. The following offenses are designated as additional sexual offenses for purposes of 18 U...

18 CFR 5.21 - Additional information.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional information. 5.21 Section 5.21 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS § 5.21...

18 CFR 5.21 - Additional information.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Additional information. 5.21 Section 5.21 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS § 5.21...

Information Systems at Enterprise. Design of Secure Network of Enterprise

NASA Astrophysics Data System (ADS)

Saigushev, N. Y.; Mikhailova, U. V.; Vedeneeva, O. A.; Tsaran, A. A.

2018-05-01

No enterprise and company can do without designing its own corporate network in today's information society. It accelerates and facilitates the work of employees at any level, but contains a big threat to confidential information of the company. In addition to the data theft attackers, there are plenty of information threats posed by modern malware effects. In this regard, the computational security of corporate networks is an important component of modern information technologies of computer security for any enterprise. This article says about the design of the protected corporate network of the enterprise that provides the computers on the network access to the Internet, as well interoperability with the branch. The access speed to the Internet at a high level is provided through the use of high-speed access channels and load balancing between devices. The security of the designed network is performed through the use of VLAN technology as well as access lists and AAA server.

76 FR 25405 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

... Narcotics Kingpin Designation Act. The list of additional designees is as follows: 1. SHAYESTEH, Bahram Ali (a.k.a. JADALI, Bahrami Ali; a.k.a. SHAYESTEH, Bahrami Ali), 80331 Muenchen, Bayern, Germany; DOB 6...

Incorporating lower grade toxicity information into dose finding designs

PubMed Central

Iasonos, Alexia; Zohar, Sarah; O’Quigley, John

2012-01-01

Background Toxicity grades underlie the definition of a dose limiting toxicity (DLT) but in the majority of phase I designs, the information contained in the individual grades is not used. Some authors have argued that it may be more appropriate to consider a polytomous rather than dichotomous response. Purpose We investigate whether the added information on individual grades can improve the operating characteristics of the Continual Reassessment Method (CRM). Methods We compare the original CRM design for a binary response with two stage CRM designs which make di erent use of lower-grade toxicity information via simulations. Specifically we study; a two-stage design that utilizes lower-grade toxicities in the first stage only, during the initial non model-based escalation, and two-stage designs where lower grades are used throughout the trial via explicit models. We postulate a model relating the rates of lower grade toxicities to the rate of DLTs, or assume the relative rates of low to high grade toxicities is unknown. The designs were compared in terms of accuracy, patient allocation and precision. Results Significant gains can be achieved when using grades in the first stage of a two-stage design. Otherwise, only modest improvements are seen when the information on grades is exploited via the use of explicit models, where the parameters are known precisely. CRM with some use of grade information, increases the number of patients treated at the MTD by approximately 5%. The additional information from lower grades can lead to a small increase in the precision of our estimate of the MTD. Limitations Our comparisons are not exhaustive and it would be worth studying other models and situations. Conclusions Although, the gains in performance were not as great as we had hoped, we observed no cases where the performance of CRM was poorer. Our recommendation is that investigators might consider using graded toxicities at the design stage. PMID:21835856

PubMed on Tap: discovering design principles for online information delivery to handheld computers.

PubMed

Hauser, Susan E; Demner-Fushman, Dina; Ford, Glenn; Thoma, George R

2004-01-01

Online access to biomedical information from handheld computers will be a valuable adjunct to other popular medical applications if information delivery systems are designed with handheld computers in mind. The goal of this project is to discover design principles to facilitate practitioners' access to online medical information at the point-of-care. A prototype system was developed to serve as a testbed for this research. Using the testbed, an initial evaluation has yielded several user interface design principles. Continued research is expected to discover additional user interface design principles as well as guidelines for results organization and system performance

Exploring the Design and Role of Mobile Apps for Healthcare Providers to Find Teratogenic Information

PubMed Central

Lie, Lily; Shetty, Vishwas; Gupta, Karan; Polifka, Janine E; Markham, Glen; Albee, Sarah; Collins, Carol; Hsieh, Gary

2017-01-01

Healthcare providers (HCPs) caring for pregnant patients often need information on drug risks to the embryo or fetus, but such complex information takes time to find and is difficult to convey on an app. In this work, we first surveyed 167 HCPs to understand their current teratogen information-seeking practices to help inform our general design goals. Using the insights gained, we then designed a prototype of a mobile app and tested it with 22 HCPs. We learned that HCP ’s information needs in this context can be grouped into 3 types: to understand, to decide, and to explain. Different sets of information and features may be needed to support these different needs. Further, while some HCPs had concerns about appearing unprofessional and unknowledgeable when using the app in front of patients, many did not. They noted that incorporating mobile information apps into practice improves information access, can help signal care and technology-savviness, in addition to providing an opportunity to engage and educate patients. Implications for design and additional features for reference apps for HCPs are discussed. PMID:29854178

10 CFR 52.158 - Contents of application; additional technical information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Contents of application; additional technical information... APPROVALS FOR NUCLEAR POWER PLANTS Manufacturing Licenses § 52.158 Contents of application; additional technical information. The application must contain: (a)(1) Inspections, tests, analyses, and acceptance...

Value of information analysis optimizing future trial design from a pilot study on catheter securement devices.

PubMed

Tuffaha, Haitham W; Reynolds, Heather; Gordon, Louisa G; Rickard, Claire M; Scuffham, Paul A

2014-12-01

Value of information analysis has been proposed as an alternative to the standard hypothesis testing approach, which is based on type I and type II errors, in determining sample sizes for randomized clinical trials. However, in addition to sample size calculation, value of information analysis can optimize other aspects of research design such as possible comparator arms and alternative follow-up times, by considering trial designs that maximize the expected net benefit of research, which is the difference between the expected cost of the trial and the expected value of additional information. To apply value of information methods to the results of a pilot study on catheter securement devices to determine the optimal design of a future larger clinical trial. An economic evaluation was performed using data from a multi-arm randomized controlled pilot study comparing the efficacy of four types of catheter securement devices: standard polyurethane, tissue adhesive, bordered polyurethane and sutureless securement device. Probabilistic Monte Carlo simulation was used to characterize uncertainty surrounding the study results and to calculate the expected value of additional information. To guide the optimal future trial design, the expected costs and benefits of the alternative trial designs were estimated and compared. Analysis of the value of further information indicated that a randomized controlled trial on catheter securement devices is potentially worthwhile. Among the possible designs for the future trial, a four-arm study with 220 patients/arm would provide the highest expected net benefit corresponding to 130% return-on-investment. The initially considered design of 388 patients/arm, based on hypothesis testing calculations, would provide lower net benefit with return-on-investment of 79%. Cost-effectiveness and value of information analyses were based on the data from a single pilot trial which might affect the accuracy of our uncertainty estimation. Another

10 CFR 52.80 - Contents of applications; additional technical information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; additional technical information... APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical information. The application must contain: (a) The proposed inspections, tests, and analyses, including those...

20 CFR 609.23 - Furnishing additional information.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Furnishing additional information. 609.23 Section 609.23 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR UNEMPLOYMENT COMPENSATION FOR FEDERAL CIVILIAN EMPLOYEES Responsibilities of Federal Agencies § 609.23...

A case study on topology optimized design for additive manufacturing

NASA Astrophysics Data System (ADS)

Gebisa, A. W.; Lemu, H. G.

2017-12-01

Topology optimization is an optimization method that employs mathematical tools to optimize material distribution in a part to be designed. Earlier developments of topology optimization considered conventional manufacturing techniques that have limitations in producing complex geometries. This has hindered the topology optimization efforts not to fully be realized. With the emergence of additive manufacturing (AM) technologies, the technology that builds a part layer upon a layer directly from three dimensional (3D) model data of the part, however, producing complex shape geometry is no longer an issue. Realization of topology optimization through AM provides full design freedom for the design engineers. The article focuses on topologically optimized design approach for additive manufacturing with a case study on lightweight design of jet engine bracket. The study result shows that topology optimization is a powerful design technique to reduce the weight of a product while maintaining the design requirements if additive manufacturing is considered.

An information model to support user-centered design of medical devices.

PubMed

Hagedorn, Thomas J; Krishnamurty, Sundar; Grosse, Ian R

2016-08-01

The process of engineering design requires the product development team to balance the needs and limitations of many stakeholders, including those of the user, regulatory organizations, and the designing institution. This is particularly true in medical device design, where additional consideration must be given for a much more complex user-base that can only be accessed on a limited basis. Given this inherent challenge, few projects exist that consider design domain concepts, such as aspects of a detailed design, a detailed view of various stakeholders and their capabilities, along with the user-needs simultaneously. In this paper, we present a novel information model approach that combines a detailed model of design elements with a model of the design itself, customer requirements, and of the capabilities of the customer themselves. The information model is used to facilitate knowledge capture and automated reasoning across domains with a minimal set of rules by adopting a terminology that treats customer and design specific factors identically, thus enabling straightforward assessments. A uniqueness of this approach is that it systematically provides an integrated perspective on the key usability information that drive design decisions towards more universal or effective outcomes with the very design information impacted by the usability information. This can lead to cost-efficient optimal designs based on a direct inclusion of the needs of customers alongside those of business, marketing, and engineering requirements. Two case studies are presented to show the method's potential as a more effective knowledge management tool with built-in automated inferences that provide design insight, as well as its overall effectiveness as a platform to develop and execute medical device design from a holistic perspective. Copyright © 2016 Elsevier Inc. All rights reserved.

43 CFR 3922.30 - Application-Additional information.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Application-Additional information. 3922.30 Section 3922.30 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR RANGE MANAGEMENT (4000) OIL SHALE LEASING Application...

43 CFR 3922.30 - Application-Additional information.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Application-Additional information. 3922.30 Section 3922.30 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) OIL SHALE LEASING Application...

43 CFR 3922.30 - Application-Additional information.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Application-Additional information. 3922.30 Section 3922.30 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) OIL SHALE LEASING Application...

43 CFR 3922.30 - Application-Additional information.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Application-Additional information. 3922.30 Section 3922.30 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) OIL SHALE LEASING Application...

Secure Retrieval of FFTF Testing, Design, and Operating Information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butner, R. Scott; Wootan, David W.; Omberg, Ronald P.

One of the goals of the Advanced Fuel Cycle Initiative (AFCI) is to preserve the knowledge that has been gained in the United States on Liquid Metal Reactors (LMR). In addition, preserving LMR information and knowledge is part of a larger international collaborative activity conducted under the auspices of the International Atomic Energy Agency (IAEA). A similar program is being conducted for EBR-II at the Idaho Nuclear Laboratory (INL) and international programs are also in progress. Knowledge preservation at the FFTF is focused on the areas of design, construction, startup, and operation of the reactor. As the primary function ofmore » the FFTF was testing, the focus is also on preserving information obtained from irradiation testing of fuels and materials. This information will be invaluable when, at a later date, international decisions are made to pursue new LMRs. In the interim, this information may be of potential use for international exchanges with other LMR programs around the world. At least as important in the United States, which is emphasizing large-scale computer simulation and modeling, this information provides the basis for creating benchmarks for validating and testing these large scale computer programs. Although the preservation activity with respect to FFTF information as discussed below is still underway, the team of authors above is currently retrieving and providing experimental and design information to the LMR modeling and simulation efforts for use in validating their computer models. On the Hanford Site, the FFTF reactor plant is one of the facilities intended for decontamination and decommissioning consistent with the cleanup mission on this site. The reactor facility has been deactivated and is being maintained in a cold and dark minimal surveillance and maintenance mode until final decommissioning is pursued. In order to ensure protection of information at risk, the program to date has focused on sequestering and secure retrieval

25 CFR 215.17 - Additional information required.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Additional information required. 215.17 Section 215.17 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING... application, must file one certified copy of articles of incorporation and, if a foreign corporation, evidence...

25 CFR 215.17 - Additional information required.

Code of Federal Regulations, 2010 CFR

2010-04-01

... interested in lead and zinc mining leases, or land under the jurisdiction of the Quapaw Indian Agency, and... 25 Indians 1 2010-04-01 2010-04-01 false Additional information required. 215.17 Section 215.17 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING...

12 CFR 335.801 - Inapplicable SEC regulations; FDIC substituted regulations; additional information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... For information and answers to technical questions or problems relating to the use of FDICconnect... regulations; additional information. 335.801 Section 335.801 Banks and Banking FEDERAL DEPOSIT INSURANCE... Inapplicable SEC regulations; FDIC substituted regulations; additional information. (a) Filing fees. Filing...

12 CFR 1272.7 - Examinations; requests for additional information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... information. 1272.7 Section 1272.7 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS NEW BUSINESS ACTIVITIES § 1272.7 Examinations; requests for additional information. (a) General... business activity, nothing in this part shall limit the right of the FHFA at any time to: (1) Request...

12 CFR 1272.7 - Examinations; requests for additional information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... information. 1272.7 Section 1272.7 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS NEW BUSINESS ACTIVITIES § 1272.7 Examinations; requests for additional information. (a) General... business activity, nothing in this part shall limit the right of the FHFA at any time to: (1) Request...

12 CFR 1272.7 - Examinations; requests for additional information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... information. 1272.7 Section 1272.7 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS NEW BUSINESS ACTIVITIES § 1272.7 Examinations; requests for additional information. (a) General... business activity, nothing in this part shall limit the right of the FHFA at any time to: (1) Request...

Information theory-based decision support system for integrated design of multivariable hydrometric networks

NASA Astrophysics Data System (ADS)

Keum, Jongho; Coulibaly, Paulin

2017-07-01

Adequate and accurate hydrologic information from optimal hydrometric networks is an essential part of effective water resources management. Although the key hydrologic processes in the water cycle are interconnected, hydrometric networks (e.g., streamflow, precipitation, groundwater level) have been routinely designed individually. A decision support framework is proposed for integrated design of multivariable hydrometric networks. The proposed method is applied to design optimal precipitation and streamflow networks simultaneously. The epsilon-dominance hierarchical Bayesian optimization algorithm was combined with Shannon entropy of information theory to design and evaluate hydrometric networks. Specifically, the joint entropy from the combined networks was maximized to provide the most information, and the total correlation was minimized to reduce redundant information. To further optimize the efficiency between the networks, they were designed by maximizing the conditional entropy of the streamflow network given the information of the precipitation network. Compared to the traditional individual variable design approach, the integrated multivariable design method was able to determine more efficient optimal networks by avoiding the redundant stations. Additionally, four quantization cases were compared to evaluate their effects on the entropy calculations and the determination of the optimal networks. The evaluation results indicate that the quantization methods should be selected after careful consideration for each design problem since the station rankings and the optimal networks can change accordingly.

Information-Processing Models and Curriculum Design

ERIC Educational Resources Information Center

Calfee, Robert C.

1970-01-01

"This paper consists of three sections--(a) the relation of theoretical analyses of learning to curriculum design, (b) the role of information-processing models in analyses of learning processes, and (c) selected examples of the application of information-processing models to curriculum design problems." (Author)

Shape design sensitivity analysis using domain information

NASA Technical Reports Server (NTRS)

Seong, Hwal-Gyeong; Choi, Kyung K.

1985-01-01

A numerical method for obtaining accurate shape design sensitivity information for built-up structures is developed and demonstrated through analysis of examples. The basic character of the finite element method, which gives more accurate domain information than boundary information, is utilized for shape design sensitivity improvement. A domain approach for shape design sensitivity analysis of built-up structures is derived using the material derivative idea of structural mechanics and the adjoint variable method of design sensitivity analysis. Velocity elements and B-spline curves are introduced to alleviate difficulties in generating domain velocity fields. The regularity requirements of the design velocity field are studied.

Health motivation and product design determine consumers' visual attention to nutrition information on food products.

PubMed

Visschers, Vivianne H M; Hess, Rebecca; Siegrist, Michael

2010-07-01

In the present study we investigated consumers' visual attention to nutrition information on food products using an indirect instrument, an eye tracker. In addition, we looked at whether people with a health motivation focus on nutrition information on food products more than people with a taste motivation. Respondents were instructed to choose one of five cereals for either the kindergarten (health motivation) or the student cafeteria (taste motivation). The eye tracker measured their visual attention during this task. Then respondents completed a short questionnaire. Laboratory of the ETH Zurich, Switzerland. Videos and questionnaires from thirty-two students (seventeen males; mean age 24.91 years) were analysed. Respondents with a health motivation viewed the nutrition information on the food products for longer and more often than respondents with a taste motivation. Health motivation also seemed to stimulate deeper processing of the nutrition information. The student cafeteria group focused primarily on the other information and did this for longer and more often than the health motivation group. Additionally, the package design affected participants' nutrition information search. Two factors appear to influence whether people pay attention to nutrition information on food products: their motivation and the product's design. If the package design does not sufficiently facilitate the localization of nutrition information, health motivation can stimulate consumers to look for nutrition information so that they may make a more deliberate food choice.

A Model for Teaching Information Design

ERIC Educational Resources Information Center

Pettersson, Rune

2011-01-01

The author presents his views on the teaching of information design. The starting point includes some general aspects of teaching and learning. The multidisciplinary structure and content of information design as well as the combined practical and theoretical components influence studies of the discipline. Experiences from working with a model for…

A regularized variable selection procedure in additive hazards model with stratified case-cohort design.

PubMed

Ni, Ai; Cai, Jianwen

2018-07-01

Case-cohort designs are commonly used in large epidemiological studies to reduce the cost associated with covariate measurement. In many such studies the number of covariates is very large. An efficient variable selection method is needed for case-cohort studies where the covariates are only observed in a subset of the sample. Current literature on this topic has been focused on the proportional hazards model. However, in many studies the additive hazards model is preferred over the proportional hazards model either because the proportional hazards assumption is violated or the additive hazards model provides more relevent information to the research question. Motivated by one such study, the Atherosclerosis Risk in Communities (ARIC) study, we investigate the properties of a regularized variable selection procedure in stratified case-cohort design under an additive hazards model with a diverging number of parameters. We establish the consistency and asymptotic normality of the penalized estimator and prove its oracle property. Simulation studies are conducted to assess the finite sample performance of the proposed method with a modified cross-validation tuning parameter selection methods. We apply the variable selection procedure to the ARIC study to demonstrate its practical use.

Industrial knowledge design: an approach for designing information artifacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schatz, Sae; Berking, Peter; Raybourn, Elaine M.

In this study, the authors define a new approach that addresses the challenge of efficiently designing informational artefacts for optimal knowledge acquisition, an important issue in cognitive ergonomics. Termed Industrial Knowledge Design (or InK'D), it draws from information-related (e.g. informatics) and neurosciences-related (e.g. neuroergonomics) disciplines. Although it can be used for a broad scope of communication-driven business functions, our focus as learning professionals is on conveying knowledge for purposes of training, education, and performance support. This paper discusses preliminary principles of InK'D practice that can be employed to maximise the quality and quantity of transferred knowledge through interaction design. Themore » paper codifies tacit knowledge into explicit concepts that can be leveraged by expert and non-expert knowledge designers alike.« less

Industrial knowledge design: an approach for designing information artifacts

DOE PAGES

Schatz, Sae; Berking, Peter; Raybourn, Elaine M.

2017-01-19

In this study, the authors define a new approach that addresses the challenge of efficiently designing informational artefacts for optimal knowledge acquisition, an important issue in cognitive ergonomics. Termed Industrial Knowledge Design (or InK'D), it draws from information-related (e.g. informatics) and neurosciences-related (e.g. neuroergonomics) disciplines. Although it can be used for a broad scope of communication-driven business functions, our focus as learning professionals is on conveying knowledge for purposes of training, education, and performance support. This paper discusses preliminary principles of InK'D practice that can be employed to maximise the quality and quantity of transferred knowledge through interaction design. Themore » paper codifies tacit knowledge into explicit concepts that can be leveraged by expert and non-expert knowledge designers alike.« less

Design and fabrication of a sleep apnea device using computer-aided design/additive manufacture technologies.

PubMed

Al Mortadi, Noor; Eggbeer, Dominic; Lewis, Jeffrey; Williams, Robert J

2013-04-01

The aim of this study was to analyze the latest innovations in additive manufacture techniques and uniquely apply them to dentistry, to build a sleep apnea device requiring rotating hinges. Laser scanning was used to capture the three-dimensional topography of an upper and lower dental cast. The data sets were imported into an appropriate computer-aided design software environment, which was used to design a sleep apnea device. This design was then exported as a stereolithography file and transferred for three-dimensional printing by an additive manufacture machine. The results not only revealed that the novel computer-based technique presented provides new design opportunities but also highlighted limitations that must be addressed before the techniques can become clinically viable.

29 CFR 502.44 - Additional information, if required.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Additional information, if required. 502.44 Section 502.44 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS ENFORCEMENT OF CONTRACTUAL OBLIGATIONS FOR TEMPORARY ALIEN AGRICULTURAL WORKERS ADMITTED UNDER SECTION 218 OF...

29 CFR 501.44 - Additional information, if required.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Additional information, if required. 501.44 Section 501.44 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS ENFORCEMENT OF CONTRACTUAL OBLIGATIONS FOR TEMPORARY ALIEN AGRICULTURAL WORKERS ADMITTED UNDER SECTION 218 OF...

Human Information Behaviour and Design, Development and Evaluation of Information Retrieval Systems

ERIC Educational Resources Information Center

Keshavarz, Hamid

2008-01-01

Purpose: The purpose of this paper is to introduce the concept of human information behaviour and to explore the relationship between information behaviour of users and the existing approaches dominating design and evaluation of information retrieval (IR) systems and also to describe briefly new design and evaluation methods in which extensive…

Research on Design Information Management System for Leather Goods

NASA Astrophysics Data System (ADS)

Lu, Lei; Peng, Wen-li

The idea of setting up a design information management system of leather goods was put forward to solve the problems existed in current information management of leather goods. Working principles of the design information management system for leather goods were analyzed in detail. Firstly, the acquiring approach of design information of leather goods was introduced. Secondly, the processing methods of design information were introduced. Thirdly, the management of design information in database was studied. Finally, the application of the system was discussed by taking the shoes products as an example.

Information Design with Teaching and Learning in Mind

ERIC Educational Resources Information Center

Pettersson, Rune; Avgerinou, Maria D.

2016-01-01

Based on the existing research from Cognitive Psychology, Information Design, Instructional Design, and Multimedia Design, it is possible to develop recommendations for the design of learning experiences that facilitate, support and enrich student academic performance. This article concentrates on the role of the teacher as information designer in…

21 CFR 207.31 - Additional drug listing information.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL DISTRIBUTION...

21 CFR 207.31 - Additional drug listing information.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL DISTRIBUTION...

21 CFR 207.31 - Additional drug listing information.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL DISTRIBUTION...

21 CFR 207.31 - Additional drug listing information.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL DISTRIBUTION...

Cloud-Based Automated Design and Additive Manufacturing: A Usage Data-Enabled Paradigm Shift

PubMed Central

Lehmhus, Dirk; Wuest, Thorsten; Wellsandt, Stefan; Bosse, Stefan; Kaihara, Toshiya; Thoben, Klaus-Dieter; Busse, Matthias

2015-01-01

Integration of sensors into various kinds of products and machines provides access to in-depth usage information as basis for product optimization. Presently, this large potential for more user-friendly and efficient products is not being realized because (a) sensor integration and thus usage information is not available on a large scale and (b) product optimization requires considerable efforts in terms of manpower and adaptation of production equipment. However, with the advent of cloud-based services and highly flexible additive manufacturing techniques, these obstacles are currently crumbling away at rapid pace. The present study explores the state of the art in gathering and evaluating product usage and life cycle data, additive manufacturing and sensor integration, automated design and cloud-based services in manufacturing. By joining and extrapolating development trends in these areas, it delimits the foundations of a manufacturing concept that will allow continuous and economically viable product optimization on a general, user group or individual user level. This projection is checked against three different application scenarios, each of which stresses different aspects of the underlying holistic concept. The following discussion identifies critical issues and research needs by adopting the relevant stakeholder perspectives. PMID:26703606

Cloud-Based Automated Design and Additive Manufacturing: A Usage Data-Enabled Paradigm Shift.

PubMed

Lehmhus, Dirk; Wuest, Thorsten; Wellsandt, Stefan; Bosse, Stefan; Kaihara, Toshiya; Thoben, Klaus-Dieter; Busse, Matthias

2015-12-19

Integration of sensors into various kinds of products and machines provides access to in-depth usage information as basis for product optimization. Presently, this large potential for more user-friendly and efficient products is not being realized because (a) sensor integration and thus usage information is not available on a large scale and (b) product optimization requires considerable efforts in terms of manpower and adaptation of production equipment. However, with the advent of cloud-based services and highly flexible additive manufacturing techniques, these obstacles are currently crumbling away at rapid pace. The present study explores the state of the art in gathering and evaluating product usage and life cycle data, additive manufacturing and sensor integration, automated design and cloud-based services in manufacturing. By joining and extrapolating development trends in these areas, it delimits the foundations of a manufacturing concept that will allow continuous and economically viable product optimization on a general, user group or individual user level. This projection is checked against three different application scenarios, each of which stresses different aspects of the underlying holistic concept. The following discussion identifies critical issues and research needs by adopting the relevant stakeholder perspectives.

Paradigms for adaptive statistical information designs: practical experiences and strategies.

PubMed

Wang, Sue-Jane; Hung, H M James; O'Neill, Robert

2012-11-10

In the last decade or so, interest in adaptive design clinical trials has gradually been directed towards their use in regulatory submissions by pharmaceutical drug sponsors to evaluate investigational new drugs. Methodological advances of adaptive designs are abundant in the statistical literature since the 1970s. The adaptive design paradigm has been enthusiastically perceived to increase the efficiency and to be more cost-effective than the fixed design paradigm for drug development. Much interest in adaptive designs is in those studies with two-stages, where stage 1 is exploratory and stage 2 depends upon stage 1 results, but where the data of both stages will be combined to yield statistical evidence for use as that of a pivotal registration trial. It was not until the recent release of the US Food and Drug Administration Draft Guidance for Industry on Adaptive Design Clinical Trials for Drugs and Biologics (2010) that the boundaries of flexibility for adaptive designs were specifically considered for regulatory purposes, including what are exploratory goals, and what are the goals of adequate and well-controlled (A&WC) trials (2002). The guidance carefully described these distinctions in an attempt to minimize the confusion between the goals of preliminary learning phases of drug development, which are inherently substantially uncertain, and the definitive inference-based phases of drug development. In this paper, in addition to discussing some aspects of adaptive designs in a confirmatory study setting, we underscore the value of adaptive designs when used in exploratory trials to improve planning of subsequent A&WC trials. One type of adaptation that is receiving attention is the re-estimation of the sample size during the course of the trial. We refer to this type of adaptation as an adaptive statistical information design. Specifically, a case example is used to illustrate how challenging it is to plan a confirmatory adaptive statistical information

25 CFR 227.7 - Additional information from applicant.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases...

25 CFR 227.7 - Additional information from applicant.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases...

25 CFR 227.7 - Additional information from applicant.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases...

25 CFR 227.7 - Additional information from applicant.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases...

Censored data treatment using additional information in intelligent medical systems

NASA Astrophysics Data System (ADS)

Zenkova, Z. N.

2015-11-01

Statistical procedures are a very important and significant part of modern intelligent medical systems. They are used for proceeding, mining and analysis of different types of the data about patients and their diseases; help to make various decisions, regarding the diagnosis, treatment, medication or surgery, etc. In many cases the data can be censored or incomplete. It is a well-known fact that censorship considerably reduces the efficiency of statistical procedures. In this paper the author makes a brief review of the approaches which allow improvement of the procedures using additional information, and describes a modified estimation of an unknown cumulative distribution function involving additional information about a quantile which is known exactly. The additional information is used by applying a projection of a classical estimator to a set of estimators with certain properties. The Kaplan-Meier estimator is considered as an estimator of the unknown cumulative distribution function, the properties of the modified estimator are investigated for a case of a single right censorship by means of simulations.

25 CFR 227.7 - Additional information from applicant.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases § 227.7...

Using generalized additive (mixed) models to analyze single case designs.

PubMed

Shadish, William R; Zuur, Alain F; Sullivan, Kristynn J

2014-04-01

This article shows how to apply generalized additive models and generalized additive mixed models to single-case design data. These models excel at detecting the functional form between two variables (often called trend), that is, whether trend exists, and if it does, what its shape is (e.g., linear and nonlinear). In many respects, however, these models are also an ideal vehicle for analyzing single-case designs because they can consider level, trend, variability, overlap, immediacy of effect, and phase consistency that single-case design researchers examine when interpreting a functional relation. We show how these models can be implemented in a wide variety of ways to test whether treatment is effective, whether cases differ from each other, whether treatment effects vary over cases, and whether trend varies over cases. We illustrate diagnostic statistics and graphs, and we discuss overdispersion of data in detail, with examples of quasibinomial models for overdispersed data, including how to compute dispersion and quasi-AIC fit indices in generalized additive models. We show how generalized additive mixed models can be used to estimate autoregressive models and random effects and discuss the limitations of the mixed models compared to generalized additive models. We provide extensive annotated syntax for doing all these analyses in the free computer program R. Copyright © 2013 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials.

PubMed

Zadpoor, Amir A

2017-07-25

Recent advances in additive manufacturing (AM) techniques in terms of accuracy, reliability, the range of processable materials, and commercial availability have made them promising candidates for production of functional parts including those used in the biomedical industry. The complexity-for-free feature offered by AM means that very complex designs become feasible to manufacture, while batch-size-indifference enables fabrication of fully patient-specific medical devices. Design for AM (DfAM) approaches aim to fully utilize those features for development of medical devices with substantially enhanced performance and biomaterials with unprecedented combinations of favorable properties that originate from complex geometrical designs at the micro-scale. This paper reviews the most important approaches in DfAM particularly those applicable to additive bio-manufacturing including image-based design pipelines, parametric and non-parametric designs, metamaterials, rational and computationally enabled design, topology optimization, and bio-inspired design. Areas with limited research have been identified and suggestions have been made for future research. The paper concludes with a brief discussion on the practical aspects of DfAM and the potential of combining AM with subtractive and formative manufacturing processes in so-called hybrid manufacturing processes.

Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials

PubMed Central

Zadpoor, Amir A.

2017-01-01

Recent advances in additive manufacturing (AM) techniques in terms of accuracy, reliability, the range of processable materials, and commercial availability have made them promising candidates for production of functional parts including those used in the biomedical industry. The complexity-for-free feature offered by AM means that very complex designs become feasible to manufacture, while batch-size-indifference enables fabrication of fully patient-specific medical devices. Design for AM (DfAM) approaches aim to fully utilize those features for development of medical devices with substantially enhanced performance and biomaterials with unprecedented combinations of favorable properties that originate from complex geometrical designs at the micro-scale. This paper reviews the most important approaches in DfAM particularly those applicable to additive bio-manufacturing including image-based design pipelines, parametric and non-parametric designs, metamaterials, rational and computationally enabled design, topology optimization, and bio-inspired design. Areas with limited research have been identified and suggestions have been made for future research. The paper concludes with a brief discussion on the practical aspects of DfAM and the potential of combining AM with subtractive and formative manufacturing processes in so-called hybrid manufacturing processes. PMID:28757572

Motivational Design in Information Literacy Instruction

ERIC Educational Resources Information Center

Hess, Amanda Nichols

2015-01-01

Motivational design theory complements instructional design theory and, when used together, both principles can affect learning, knowledge acquisition, and knowledge retention. In information literacy instruction, motivational design exists throughout the appropriate standards documents. However, there is limited current research on the best…

Value Addition in Information Technology and Literacy: An Empirical Investigation

ERIC Educational Resources Information Center

Sanghera, Kamaljeet K.

2009-01-01

The purpose of the research is to analyze the value addition in students' information communication and technology (ICT) literacy level and confidence in using technology after completing a general education information technology course at a four-year university. An online survey was created to examine students' perceptions. The findings revealed…

Recommended System Design for the Occupational Health Management Information System (OHMIS). Volume 1.

DTIC Science & Technology

1983-04-01

Management Information System (OHMIS). The system design includes: detailed function data flows for each of the core data processing functions of OHMIS, in the form of input/processing/output algorithms; detailed descriptions of the inputs and outputs; performance specifications of OHMIS; resources required to develop and operate OHMIS (Vol II). In addition, the report provides a summary of the rationale used to develop the recommended system design, a description of the methodology used to develop the recommended system design, and a review of existing

Participatory Design of an Integrated Information System Design to Support Public Health Nurses and Nurse Managers

PubMed Central

Reeder, Blaine; Hills, Rebecca A.; Turner, Anne M.; Demiris, George

2014-01-01

Objectives The objectives of the study were to use persona-driven and scenario-based design methods to create a conceptual information system design to support public health nursing. Design and Sample We enrolled 19 participants from two local health departments to conduct an information needs assessment, create a conceptual design, and conduct a preliminary design validation. Measures Interviews and thematic analysis were used to characterize information needs and solicit design recommendations from participants. Personas were constructed from participant background information, and scenario-based design was used to create a conceptual information system design. Two focus groups were conducted as a first iteration validation of information needs, personas, and scenarios. Results Eighty-nine information needs were identified. Two personas and 89 scenarios were created. Public health nurses and nurse managers confirmed the accuracy of information needs, personas, scenarios, and the perceived usefulness of proposed features of the conceptual design. Design artifacts were modified based on focus group results. Conclusion Persona-driven design and scenario-based design are feasible methods to design for common work activities in different local health departments. Public health nurses and nurse managers should be engaged in the design of systems that support their work. PMID:24117760

Improving phylogenetic analyses by incorporating additional information from genetic sequence databases.

PubMed

Liang, Li-Jung; Weiss, Robert E; Redelings, Benjamin; Suchard, Marc A

2009-10-01

Statistical analyses of phylogenetic data culminate in uncertain estimates of underlying model parameters. Lack of additional data hinders the ability to reduce this uncertainty, as the original phylogenetic dataset is often complete, containing the entire gene or genome information available for the given set of taxa. Informative priors in a Bayesian analysis can reduce posterior uncertainty; however, publicly available phylogenetic software specifies vague priors for model parameters by default. We build objective and informative priors using hierarchical random effect models that combine additional datasets whose parameters are not of direct interest but are similar to the analysis of interest. We propose principled statistical methods that permit more precise parameter estimates in phylogenetic analyses by creating informative priors for parameters of interest. Using additional sequence datasets from our lab or public databases, we construct a fully Bayesian semiparametric hierarchical model to combine datasets. A dynamic iteratively reweighted Markov chain Monte Carlo algorithm conveniently recycles posterior samples from the individual analyses. We demonstrate the value of our approach by examining the insertion-deletion (indel) process in the enolase gene across the Tree of Life using the phylogenetic software BALI-PHY; we incorporate prior information about indels from 82 curated alignments downloaded from the BAliBASE database.

Design and implementation of a telecare information platform.

PubMed

Li, Shing-Han; Wang, Ching-Yao; Lu, Wen-Hui; Lin, Yuan-Yuan; Yen, David C

2012-06-01

For the aging population and for people with dominant chronic diseases, countries all over the world are promoting an "Aging in Place" program with its primary focus on the implementation of telecare. In 2009, Taiwan held a "Health Care Value-Added Platinum Program" with the goal of promoting the development of "Telecare" services by integrating medical treatment, healthcare, information communication, medical equipment and materials and by linking related cross-discipline professions to enable people to familiarize themselves with preventive healthcare services offered in their household and community environments. In addition, this program can be utilized to effectively provide diversified healthcare service benefitting society as a whole. This study aims to promote a diversified telecare service network in Taiwan's household and community environments, establish telecare information platforms, build an internal network of various healthcare service modes, standardize externally interfacing telecare information networks, effectively utilize related healthcare service resources, and complete reasonable service resource links forming an up-to-date health information exchange network. To this end, the telecare information platform based on service oriented architecture (SOA) is designed to promote an open telecare information interface and sharing environment to assist in such tasks as developing healthcare information exchange services, integrating service resources among various different healthcare service modes, accessing externally complex community affairs information, supporting remote physiological information transmissions, and providing diversified remote innovative services. Information system architecture and system monitoring indices of various types of healthcare service modes are used for system integrations for future development and/or expansions.

Participatory design of an integrated information system design to support public health nurses and nurse managers.

PubMed

Reeder, Blaine; Hills, Rebecca A; Turner, Anne M; Demiris, George

2014-01-01

The objectives of the study were to use persona-driven and scenario-based design methods to create a conceptual information system design to support public health nursing. We enrolled 19 participants from two local health departments to conduct an information needs assessment, create a conceptual design, and conduct a preliminary design validation. Interviews and thematic analysis were used to characterize information needs and solicit design recommendations from participants. Personas were constructed from participant background information, and scenario-based design was used to create a conceptual information system design. Two focus groups were conducted as a first iteration validation of information needs, personas, and scenarios. Eighty-nine information needs were identified. Two personas and 89 scenarios were created. Public health nurses and nurse managers confirmed the accuracy of information needs, personas, scenarios, and the perceived usefulness of proposed features of the conceptual design. Design artifacts were modified based on focus group results. Persona-driven design and scenario-based design are feasible methods to design for common work activities in different local health departments. Public health nurses and nurse managers should be engaged in the design of systems that support their work. © 2013 Wiley Periodicals, Inc.

Designing Health Websites Based on Users' Web-Based Information-Seeking Behaviors: A Mixed-Method Observational Study.

PubMed

Pang, Patrick Cheong-Iao; Chang, Shanton; Verspoor, Karin; Pearce, Jon

2016-06-06

Laypeople increasingly use the Internet as a source of health information, but finding and discovering the right information remains problematic. These issues are partially due to the mismatch between the design of consumer health websites and the needs of health information seekers, particularly the lack of support for "exploring" health information. The aim of this research was to create a design for consumer health websites by supporting different health information-seeking behaviors. We created a website called Better Health Explorer with the new design. Through the evaluation of this new design, we derive design implications for future implementations. Better Health Explorer was designed using a user-centered approach. The design was implemented and assessed through a laboratory-based observational study. Participants tried to use Better Health Explorer and another live health website. Both websites contained the same content. A mixed-method approach was adopted to analyze multiple types of data collected in the experiment, including screen recordings, activity logs, Web browsing histories, and audiotaped interviews. Overall, 31 participants took part in the observational study. Our new design showed a positive result for improving the experience of health information seeking, by providing a wide range of information and an engaging environment. The results showed better knowledge acquisition, a higher number of page reads, and more query reformulations in both focused and exploratory search tasks. In addition, participants spent more time to discover health information with our design in exploratory search tasks, indicating higher engagement with the website. Finally, we identify 4 design considerations for designing consumer health websites and health information-seeking apps: (1) providing a dynamic information scope; (2) supporting serendipity; (3) considering trust implications; and (4) enhancing interactivity. Better Health Explorer provides strong

14 CFR 193.9 - Will the FAA ever disclose information that is designated as protected under this part?

Code of Federal Regulations, 2010 CFR

2010-01-01

....S.C. 44905, regarding information about threats to civil aviation. (b) Additional disclosures. For... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Will the FAA ever disclose information that... VOLUNTARILY SUBMITTED INFORMATION § 193.9 Will the FAA ever disclose information that is designated as...

Expanding the Design Space: Forging the Transition from 3D Printing to Additive Manufacturing

NASA Astrophysics Data System (ADS)

Amend, Matthew

The synergy of Additive Manufacturing and Computational Geometry has the potential to radically expand the "design space" of solutions available to designers. Additive Manufacturing (AM) is capable of fabricating objects that are highly complex both in geometry and material properties. However, the introduction of any new technology can have a disruptive effect on established design practices and organizations. Before "Design for Additive Manufacturing" (DFAM) is a commonplace means of producing objects employed in "real world" products, appropriate design knowledge must be sufficiently integrated within industry. First, materials suited to additive manufacturing methods must be developed to satisfy existing industry standards and specifications, or new standards must be developed. Second, a new class of design representation (CAD) tools will need to be developed. Third, designers and design organizations will need to develop strategies for employing such tools. This thesis describes three DFAM exercises intended to demonstrate the potential for innovative design when using advanced additive materials, tools, and printers. These design exercises included 1) a light-weight composite layup mold developed with topology optimization, 2) a low-pressure fluid duct enhanced with an external lattice structure, and 3) an airline seat tray designed using a non-uniform lattice structure optimized with topology optimization.

Designing Informal Learning Spaces Using Student Perspectives

ERIC Educational Resources Information Center

Riddle, Matthew David; Souter, Kay

2012-01-01

This article describes the design of informal learning spaces at an Australian university that support students in the generation of knowledge. Recent learning space design projects at La Trobe have been informed by a number of pre-existing projects, including a small research project on student use of technologies, a national project on learning…

Base Stabilization Guidance and Additive Selection for Pavement Design and Rehabilitation

DOT National Transportation Integrated Search

2017-12-01

Significant improvements have been made in base stabilization practice that include design specifications and methodology, experience with the selection of stabilizing additives, and equipment for distribution and uniform blending of additives. For t...

Procedure and information displays in advanced nuclear control rooms: experimental evaluation of an integrated design.

PubMed

Chen, Yue; Gao, Qin; Song, Fei; Li, Zhizhong; Wang, Yufan

2017-08-01

In the main control rooms of nuclear power plants, operators frequently have to switch between procedure displays and system information displays. In this study, we proposed an operation-unit-based integrated design, which combines the two displays to facilitate the synthesis of information. We grouped actions that complete a single goal into operation units and showed these operation units on the displays of system states. In addition, we used different levels of visual salience to highlight the current unit and provided a list of execution history records. A laboratory experiment, with 42 students performing a simulated procedure to deal with unexpected high pressuriser level, was conducted to compare this design against an action-based integrated design and the existing separated-displays design. The results indicate that our operation-unit-based integrated design yields the best performance in terms of time and completion rate and helped more participants to detect unexpected system failures. Practitioner Summary: In current nuclear control rooms, operators frequently have to switch between procedure and system information displays. We developed an integrated design that incorporates procedure information into system displays. A laboratory study showed that the proposed design significantly improved participants' performance and increased the probability of detecting unexpected system failures.

Wood lens design philosophy based on a binary additive manufacturing technique

NASA Astrophysics Data System (ADS)

Marasco, Peter L.; Bailey, Christopher

2016-04-01

Using additive manufacturing techniques in optical engineering to construct a gradient index (GRIN) optic may overcome a number of limitations of GRIN technology. Such techniques are maturing quickly, yielding additional design degrees of freedom for the engineer. How best to employ these degrees of freedom is not completely clear at this time. This paper describes a preliminary design philosophy, including assumptions, pertaining to a particular printing technique for GRIN optics. It includes an analysis based on simulation and initial component measurement.

36 CFR 1290.3 - Sources of assassination records and additional records and information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Sources of assassination records and additional records and information. Assassination records and... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Sources of assassination records and additional records and information. 1290.3 Section 1290.3 Parks, Forests, and Public Property...

29 CFR 2570.39 - Opportunities to submit additional information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Opportunities to submit additional information. 2570.39 Section 2570.39 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY ADMINISTRATION, DEPARTMENT OF LABOR ADMINISTRATION AND ENFORCEMENT UNDER THE EMPLOYEE RETIREMENT INCOME SECURITY ACT OF 1974 PROCEDURAL REGULATIONS UNDER THE...

The Design Log: A New Informational Tool

ERIC Educational Resources Information Center

Spivak, Mayer

1978-01-01

The design log is a record of observations, diagnoses, prescriptions, and performance specifications for each space in a structure. It is a systematic approach to design that integrates information about user needs with traditional architectural programming and design. (Author/MLF)

21 CFR 803.12 - Where and how do I submit reports and additional information?

Code of Federal Regulations, 2010 CFR

2010-04-01

... information? 803.12 Section 803.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... I submit reports and additional information? (a) You must submit any written report or additional information required under this part to FDA, CDRH, Medical Device Reporting, P.O. Box 3002, Rockville, MD...

21 CFR 803.12 - Where and how do I submit reports and additional information?

Code of Federal Regulations, 2011 CFR

2011-04-01

... information? 803.12 Section 803.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... I submit reports and additional information? (a) You must submit any written report or additional information required under this part to FDA, CDRH, Medical Device Reporting, P.O. Box 3002, Rockville, MD...

21 CFR 803.12 - Where and how do I submit reports and additional information?

Code of Federal Regulations, 2012 CFR

2012-04-01

... information? 803.12 Section 803.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... I submit reports and additional information? (a) You must submit any written report or additional information required under this part to FDA, CDRH, Medical Device Reporting, P.O. Box 3002, Rockville, MD...

High School Student Information Access and Engineering Design Performance

ERIC Educational Resources Information Center

Mentzer, Nathan

2014-01-01

Developing solutions to engineering design problems requires access to information. Research has shown that appropriately accessing and using information in the design process improves solution quality. This quasi-experimental study provides two groups of high school students with a design problem in a three hour design experience. One group has…

34 CFR 222.185 - What additional information must be included in an emergency grant application?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 1 2011-07-01 2011-07-01 false What additional information must be included in an... for A Grant § 222.185 What additional information must be included in an emergency grant application? In addition to the information specified in § 222.184, an application for an emergency grant must...

25 CFR 103.14 - Can BIA request additional information?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Can BIA request additional information? 103.14 Section 103.14 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES LOAN GUARANTY, INSURANCE, AND INTEREST SUBSIDY How a Lender Obtains a Loan Guaranty or Insurance Coverage § 103.14 Can BIA...

19 CFR 115.7 - Designation of additional Certifying Authorities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Designation of additional Certifying Authorities. 115.7 Section 115.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.7 - Designation of additional Certifying Authorities.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Designation of additional Certifying Authorities. 115.7 Section 115.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.7 - Designation of additional Certifying Authorities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Designation of additional Certifying Authorities. 115.7 Section 115.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.7 - Designation of additional Certifying Authorities.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Designation of additional Certifying Authorities. 115.7 Section 115.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.7 - Designation of additional Certifying Authorities.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Designation of additional Certifying Authorities. 115.7 Section 115.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

Designing Health Websites Based on Users’ Web-Based Information-Seeking Behaviors: A Mixed-Method Observational Study

PubMed Central

Pang, Patrick Cheong-Iao; Verspoor, Karin; Pearce, Jon

2016-01-01

Background Laypeople increasingly use the Internet as a source of health information, but finding and discovering the right information remains problematic. These issues are partially due to the mismatch between the design of consumer health websites and the needs of health information seekers, particularly the lack of support for “exploring” health information. Objective The aim of this research was to create a design for consumer health websites by supporting different health information–seeking behaviors. We created a website called Better Health Explorer with the new design. Through the evaluation of this new design, we derive design implications for future implementations. Methods Better Health Explorer was designed using a user-centered approach. The design was implemented and assessed through a laboratory-based observational study. Participants tried to use Better Health Explorer and another live health website. Both websites contained the same content. A mixed-method approach was adopted to analyze multiple types of data collected in the experiment, including screen recordings, activity logs, Web browsing histories, and audiotaped interviews. Results Overall, 31 participants took part in the observational study. Our new design showed a positive result for improving the experience of health information seeking, by providing a wide range of information and an engaging environment. The results showed better knowledge acquisition, a higher number of page reads, and more query reformulations in both focused and exploratory search tasks. In addition, participants spent more time to discover health information with our design in exploratory search tasks, indicating higher engagement with the website. Finally, we identify 4 design considerations for designing consumer health websites and health information–seeking apps: (1) providing a dynamic information scope; (2) supporting serendipity; (3) considering trust implications; and (4) enhancing interactivity

16 CFR 803.20 - Requests for additional information or documentary material.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Requests for additional information or documentary material. 803.20 Section 803.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.20 Requests for additional...

16 CFR 803.20 - Requests for additional information or documentary material.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Requests for additional information or documentary material. 803.20 Section 803.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.20 Requests for additional...

16 CFR 803.20 - Requests for additional information or documentary material.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Requests for additional information or documentary material. 803.20 Section 803.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.20 Requests for additional...

16 CFR 803.20 - Requests for additional information or documentary material.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Requests for additional information or documentary material. 803.20 Section 803.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.20 Requests for additional...

16 CFR 803.20 - Requests for additional information or documentary material.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Requests for additional information or documentary material. 803.20 Section 803.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.20 Requests for additional...

10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Additional design criteria for the underground facility. 60.133 Section 60.133 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...

A knowledge-based system design/information tool

NASA Technical Reports Server (NTRS)

Allen, James G.; Sikora, Scott E.

1990-01-01

The objective of this effort was to develop a Knowledge Capture System (KCS) for the Integrated Test Facility (ITF) at the Dryden Flight Research Facility (DFRF). The DFRF is a NASA Ames Research Center (ARC) facility. This system was used to capture the design and implementation information for NASA's high angle-of-attack research vehicle (HARV), a modified F/A-18A. In particular, the KCS was used to capture specific characteristics of the design of the HARV fly-by-wire (FBW) flight control system (FCS). The KCS utilizes artificial intelligence (AI) knowledge-based system (KBS) technology. The KCS enables the user to capture the following characteristics of automated systems: the system design; the hardware (H/W) design and implementation; the software (S/W) design and implementation; and the utilities (electrical and hydraulic) design and implementation. A generic version of the KCS was developed which can be used to capture the design information for any automated system. The deliverable items for this project consist of the prototype generic KCS and an application, which captures selected design characteristics of the HARV FCS.

An information driven strategy to support multidisciplinary design

NASA Technical Reports Server (NTRS)

Rangan, Ravi M.; Fulton, Robert E.

1990-01-01

The design of complex engineering systems such as aircraft, automobiles, and computers is primarily a cooperative multidisciplinary design process involving interactions between several design agents. The common thread underlying this multidisciplinary design activity is the information exchange between the various groups and disciplines. The integrating component in such environments is the common data and the dependencies that exist between such data. This may be contrasted to classical multidisciplinary analyses problems where there is coupling between distinct design parameters. For example, they may be expressed as mathematically coupled relationships between aerodynamic and structural interactions in aircraft structures, between thermal and structural interactions in nuclear plants, and between control considerations and structural interactions in flexible robots. These relationships provide analytical based frameworks leading to optimization problem formulations. However, in multidisciplinary design problems, information based interactions become more critical. Many times, the relationships between different design parameters are not amenable to analytical characterization. Under such circumstances, information based interactions will provide the best integration paradigm, i.e., there is a need to model the data entities and their dependencies between design parameters originating from different design agents. The modeling of such data interactions and dependencies forms the basis for integrating the various design agents.

43 CFR 2884.22 - Can BLM ask me for additional information?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Can BLM ask me for additional information? 2884.22 Section 2884.22 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU... THE MINERAL LEASING ACT Applying for MLA Grants or TUPs § 2884.22 Can BLM ask me for additional...

43 CFR 2884.22 - Can BLM ask me for additional information?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Can BLM ask me for additional information? 2884.22 Section 2884.22 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU... THE MINERAL LEASING ACT Applying for MLA Grants or TUPs § 2884.22 Can BLM ask me for additional...

76 FR 7241 - Additional Designation of Entities Pursuant to Executive Order 13382

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-09

... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Additional Designation of Entities... 4 newly-designated entities and one newly-designated individual whose property and interests in... of the 4 entities and one individual identified in this notice pursuant to Executive Order 13382 is...

75 FR 51876 - Additional Designation of Entities Pursuant to Executive Order 13382

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-23

... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Additional Designation of Entities... 3 newly-designated entities whose property and interests in property are blocked pursuant to... Their Supporters.'' DATES: The designation by the Director of OFAC of the 3 entities identified in this...

76 FR 40772 - Additional Designation of Entities Pursuant to Executive Order 13382

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-11

... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Additional Designation of Entities... 2 newly-designated entities whose property and interests in property are blocked pursuant to... Their Supporters.'' DATES: The designation by the Director of OFAC of the 2 entities identified in this...

75 FR 70352 - Additional Designation of Entities Pursuant to Executive Order 13382

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Additional Designation of Entities... 37 newly-designated entities and 5 newly-designated individuals whose property and interests in... of the 37 entities and 5 individuals identified in this notice pursuant to Executive Order 13382 is...

76 FR 12414 - Additional Designation of Entity Pursuant to Executive Order 13382

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-07

... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Additional Designation of Entity... newly-designated entity whose property and interests in property are blocked pursuant to Executive Order... Supporters.'' DATES: The designation by the Director of OFAC of the 1 entity identified in this notice...

77 FR 35114 - Additional Designation of Entity Pursuant to Executive Order 13382

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-12

... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Additional Designation of Entity... newly-designated entity whose property and interests in property are blocked pursuant to Executive Order... Supporters.'' DATES: The designation by the Director of OFAC of the 1 entity identified in this notice...

Multiplicative and additive modulation of neuronal tuning with population activity affects encoded information

PubMed Central

Arandia-Romero, Iñigo; Tanabe, Seiji; Drugowitsch, Jan; Kohn, Adam; Moreno-Bote, Rubén

2016-01-01

Numerous studies have shown that neuronal responses are modulated by stimulus properties, and also by the state of the local network. However, little is known about how activity fluctuations of neuronal populations modulate the sensory tuning of cells and affect their encoded information. We found that fluctuations in ongoing and stimulus-evoked population activity in primate visual cortex modulate the tuning of neurons in a multiplicative and additive manner. While distributed on a continuum, neurons with stronger multiplicative effects tended to have less additive modulation, and vice versa. The information encoded by multiplicatively-modulated neurons increased with greater population activity, while that of additively-modulated neurons decreased. These effects offset each other, so that population activity had little effect on total information. Our results thus suggest that intrinsic activity fluctuations may act as a `traffic light' that determines which subset of neurons are most informative. PMID:26924437

75 FR 68608 - Information Collection; Request for Authorization of Additional Classification and Rate, Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

... Authorization of Additional Classification and Rate, Standard Form 1444 AGENCY: Department of Defense (DOD... of Additional Classification and Rate, Standard Form 1444. DATES: Comments may be submitted on or.../or business confidential information provided. FOR FURTHER INFORMATION CONTACT: Mr. Ernest Woodson...

Data related to the experimental design for powder bed binder jetting additive manufacturing of silicone.

PubMed

Liravi, Farzad; Vlasea, Mihaela

2018-06-01

The data included in this article provides additional supporting information on our recent publication (Liravi et al., 2018 [1]) on a novel hybrid additive manufacturing (AM) method for fabrication of three-dimensional (3D) structures from silicone powder. A design of experiments (DoE) study has been carried out to optimize the geometrical fidelity of AM-made parts. This manuscript includes the details of a multi-level factorial DOE and the response optimization results. The variation in the temperature of powder-bed when exposed to heat is plotted as well. Furthermore, the effect of blending ratio of two parts of silicone binder on its curing speed was investigated by conducting DSC tests on a silicone binder with 100:2 precursor to curing agent ratio. The hardness of parts fabricated with non-optimum printing conditions are included and compared.

77 FR 67655 - Agency Information Collection Activities; Proposed Collection; Comment Request; Food Additive...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-13

...] Agency Information Collection Activities; Proposed Collection; Comment Request; Food Additive Petitions and Investigational Food Additive Exemptions; Extension AGENCY: Food and Drug Administration, HHS... solicits comments on food additive petitions regarding animal food. DATES: Submit electronic or written...

Conceptual design for the National Water Information System

USGS Publications Warehouse

Edwards, Melvin D.; Putnam, Arthur L.; Hutchison, Norman E.

1986-01-01

The Water Resources Division of the U.S. Geological Survey began the design and development of a National Water Information System (NWIS) in 1983. The NWIS will replace and integrate the existing data systems of the National Water Data Storage and Retrieval System, National Water Data Exchange, National Water-Use Information Program, and Water Resources Scientific Information Center. The NWIS has been designed as an interactive, distributed data system. The software system has been designed in a modular manner which integrates existing software functions and allows multiple use of software modules. The data base has been designed as a relational data model that allows integrated storage of the existing water data, water-use data, and water-data indexing information by using a common relational data base management system. The NWIS will be operated on microcomputers located in each of the Water Resources Division's District offices and many of its State, subdistrict, and field offices. The microcomputers will be linked together through a national telecommunication network maintained by the U. S. Geological Survey. The NWIS is scheduled to be placed in operation in 1990.

Adapting the design of Anesthesia Information Management Systems to innovations depicted in Industrial Property documents.

PubMed

Spyropoulos, B; Tzavaras, A; Zogogianni, D; Botsivaly, M

2013-01-01

The purpose of this paper is to present the design and the current development status of an Anesthesia Information Management System (AIMS). For this system, the physical and technical advances, depicted in relevant, recently published Industrial Property documents, have been taken into account. Additional innovative sensors create further data-load to be managed. Novel wireless data-transmission modes demand eventually compliance to further proper standards, so that interoperability between AIMS and the existing Hospital Information Systems is being sustained. We attempted to define, the state-of-the-art concerning the functions, the design-prerequisites and the relevant standards and of an "emerging" AIMS that is combining hardware innovation, real-time data acquisition, processing and displaying and lastly enabling the necessary interoperability with the other components of the existing Hospital Information Systems. Finally, we report based on this approach, about the design and implementation status, of our "real-world" system under development and discuss the multifarious obstacles encountered during this still on-going project.

An Ethnographically Informed Participatory Design of Primary Healthcare Information Technology in a Developing Country Setting.

PubMed

Shidende, Nima Herman; Igira, Faraja Teddy; Mörtberg, Christina Margaret

2017-01-01

Ethnography, with its emphasis on understanding activities where they occur, and its use of qualitative data gathering techniques rich in description, has a long tradition in Participatory Design (PD). Yet there are limited methodological insights in its application in developing countries. This paper proposes an ethnographically informed PD approach, which can be applied when designing Primary Healthcare Information Technology (PHIT). We use findings from a larger multidisciplinary project, Health Information Systems Project (HISP) to elaborate how ethnography can be used to facilitate participation of health practitioners in developing countries settings as well as indicating the importance of ethnographic approach to participatory Health Information Technology (HIT) designers. Furthermore, the paper discusses the pros and cons of using an ethnographic approach in designing HIT.

Applying Additive Manufacturing to a New Liquid Oxygen Turbopump Design

NASA Technical Reports Server (NTRS)

O’Neal, T. Derek

2016-01-01

A liquid oxygen turbopump has been designed at Marshall Space Flight Center as part of the in-house, Advanced Manufacturing Demonstrator Engine (AMDE) project. Additive manufacturing, specifically direct metal laser sintering (DMLS) of Inconel 718, is used for 77% of the parts by mass. These parts include the impeller, turbine components, and housings. This paper discusses the impacts of the DMLS fabrication technique on the design of the turbopump and lessons learned during DMLS hardware fabrication and material testing.

Personalized Progressive Addition Lenses: Correlation between Performance and Design.

PubMed

Forkel, Johanne; Reiniger, Jenny Lorén; Muschielok, Adam; Welk, Andrea; Seidemann, Anne; Baumbach, Peter

2017-02-01

A continuous set of personalized designs (design space) for progressive addition lenses (PALs) is investigated. The main goals are (1) to study how the subjects' perception of a personalized design depends on its position in the design space and (2) to compare the performance of personalized PALs to a conventional PAL with a fixed design. In a double-blind study, 51 subjects compared Rodenstock Impression FreeSign 3, which is a family of PALs with a continuously controllable personalized design, and Rodenstock Progressiv Life Free, which is a conventional PAL with a single fixed design. The positions and sizes of viewing zones and the softness of gradients of mean power and astigmatism of personalized lenses were customized to individual viewing preferences. These designs were represented as points in a design space comprising a continuum of PAL designs. Subjective ratings and experimental measurements were used to study viewing zone widths, blur gradient smoothness, amount of distortion, the feeling of safety during motion, and overall wearing comfort. (1) Far viewing zone width (experiments and ratings), near viewing zone width (experiments), blur gradient smoothness, and the amount of distortion (ratings) were significantly dependent on the position of the personalized lens design in the design space. This was consistent with the structure of the design space. (2) 82% of the subjects chose personalized lenses as their favorite. Most subjects reported higher wearing comfort and tolerability with personalized lenses than with conventional lenses. The designs of the tested personalized lenses were perceived by the subjects as intended. This is a prerequisite to the successful customization of PALs to individual wearing preferences. Possible reasons for the preference of the tested personalized lenses are the optimization with respect to individual wearing conditions and the personalization.

Information Flow in the Launch Vehicle Design/Analysis Process

NASA Technical Reports Server (NTRS)

Humphries, W. R., Sr.; Holland, W.; Bishop, R.

1999-01-01

This paper describes the results of a team effort aimed at defining the information flow between disciplines at the Marshall Space Flight Center (MSFC) engaged in the design of space launch vehicles. The information flow is modeled at a first level and is described using three types of templates: an N x N diagram, discipline flow diagrams, and discipline task descriptions. It is intended to provide engineers with an understanding of the connections between what they do and where it fits in the overall design process of the project. It is also intended to provide design managers with a better understanding of information flow in the launch vehicle design cycle.

Key principles to guide development of consumer medicine information--content analysis of information design texts.

PubMed

Raynor, David K; Dickinson, David

2009-04-01

Effective written consumer medicines information is essential to support safe and effective medicine taking, but the wording and layout of currently provided materials do not meet patients' needs. To identify principles from the wider discipline of information design for use by health professionals when developing or assessing written drug information for patients. Six experts in information design nominated texts on best practice in information design applicable to consumer medicines information. A content analysis identified key principles that were tabulated to bring out key themes. Six texts that met the inclusion criteria, were identified, and content analysis indentified 4 themes: words, type, lines, and layout. Within these main themes, there were 24 subthemes. Selected principles relating to these subthemes were: use short familiar words, short sentences, and short headings that stand out from the text; use a conversational tone of voice, addressing the reader as "you"; use a large type size while retaining sufficient white space; use bullet points to organize lists; use unjustified text (ragged right) and bold, lower-case text for emphasis. Pictures or graphics do not necessarily improve a document. Applying the good information design principles identified to written consumer medicines information could support health professionals when developing and assessing drug information for patients.

Information and the Experience of Wonder a Rhetorical Study of Information Design

ERIC Educational Resources Information Center

Jun, Soojin

2011-01-01

In the last two decades, emotion has emerged as an important theme in discussions of design. However, there is no framework to date that encompasses both emotion and information design in a single theory. This dissertation was motivated by a lack of substantive theory that would allow design researchers and educators to model the relationships…

Using Dedal to share and reuse distributed engineering design information

NASA Technical Reports Server (NTRS)

Baya, Vinod; Baudin, Catherine; Mabogunje, Ade; Das, Aseem; Cannon, David M.; Leifer, Larry J.

1994-01-01

The overall goal of the project is to facilitate the reuse of previous design experience for the maintenance, repair and redesign of artifacts in the electromechanical engineering domain. An engineering team creates information in the form of meeting summaries, project memos, progress reports, engineering notes, spreadsheet calculations and CAD drawings. Design information captured in these media is difficult to reuse because the way design concepts are referred to evolve over the life of a project and because decisions, requirements and structure are interrelated but rarely explicitly linked. Based on protocol analysis of the information seeking behavior of designer's, we defined a language to describe the content and the form of design records and implemented this language in Dedal, a tool for indexing, modeling and retrieving design information. We first describe the approach to indexing and retrieval in Dedal. Next we describe ongoing work in extending Dedal's capabilities to a distributed environment by integrating it with World Wide Web. This will enable members of a design team who are not co-located to share and reuse information.

Computational Model for Ethnographically Informed Systems Design

NASA Astrophysics Data System (ADS)

Iqbal, Rahat; James, Anne; Shah, Nazaraf; Terken, Jacuqes

This paper presents a computational model for ethnographically informed systems design that can support complex and distributed cooperative activities. This model is based on an ethnographic framework consisting of three important dimensions (e.g., distributed coordination, awareness of work and plans and procedure), and the BDI (Belief, Desire and Intention) model of intelligent agents. The ethnographic framework is used to conduct ethnographic analysis and to organise ethnographically driven information into three dimensions, whereas the BDI model allows such information to be mapped upon the underlying concepts of multi-agent systems. The advantage of this model is that it is built upon an adaptation of existing mature and well-understood techniques. By the use of this model, we also address the cognitive aspects of systems design.

The Impact of Information Technology on the Design, Development, and Implementation of a Lunar Exploration Mission

NASA Technical Reports Server (NTRS)

Gross, Anthony R.; Sims, Michael H.; Briggs, Geoffrey A.

1996-01-01

From the beginning to the present expeditions to the Moon have involved a large investment of human labor. This has been true for all aspects of the process, from the initial design of the mission, whether scientific or technological, through the development of the instruments and the spacecraft, to the flight and operational phases. In addition to the time constraints that this situation imposes, there is also a significant cost associated with the large labor costs. As a result lunar expeditions have been limited to a few robotic missions and the manned Apollo program missions of the 1970s. With the rapid rise of the new information technologies, new paradigms are emerging that promise to greatly reduce both the time and cost of such missions. With the rapidly increasing capabilities of computer hardware and software systems, as well as networks and communication systems, a new balance of work is being developed between the human and the machine system. This new balance holds the promise of greatly increased exploration capability, along with dramatically reduced design, development, and operating costs. These new information technologies, utilizing knowledge-based software and very highspeed computer systems, will provide new design and development tools, scheduling mechanisms, and vehicle and system health monitoring capabilities that have hitherto been unavailable to the mission and spacecraft designer and the system operator. This paper will utilize typical lunar missions, both robotic and crewed, as a basis to describe and illustrate how these new information system technologies could be applied to all aspects such missions. In particular, new system design tradeoff tools will be described along with technologies that will allow a very much greater degree of autonomy of exploration vehicles than has heretofore been possible. In addition, new information technologies that will significantly reduce the human operational requirements will be discussed.

"The Dose Makes the Poison": Informing Consumers About the Scientific Risk Assessment of Food Additives.

PubMed

Bearth, Angela; Cousin, Marie-Eve; Siegrist, Michael

2016-01-01

Intensive risk assessment is required before the approval of food additives. During this process, based on the toxicological principle of "the dose makes the poison,ˮ maximum usage doses are assessed. However, most consumers are not aware of these efforts to ensure the safety of food additives and are therefore sceptical, even though food additives bring certain benefits to consumers. This study investigated the effect of a short video, which explains the scientific risk assessment and regulation of food additives, on consumers' perceptions and acceptance of food additives. The primary goal of this study was to inform consumers and enable them to construct their own risk-benefit assessment and make informed decisions about food additives. The secondary goal was to investigate whether people have different perceptions of food additives of artificial (i.e., aspartame) or natural origin (i.e., steviolglycoside). To attain these research goals, an online experiment was conducted on 185 Swiss consumers. Participants were randomly assigned to either the experimental group, which was shown a video about the scientific risk assessment of food additives, or the control group, which was shown a video about a topic irrelevant to the study. After watching the video, the respondents knew significantly more, expressed more positive thoughts and feelings, had less risk perception, and more acceptance than prior to watching the video. Thus, it appears that informing consumers about complex food safety topics, such as the scientific risk assessment of food additives, is possible, and using a carefully developed information video is a successful strategy for informing consumers. © 2015 Society for Risk Analysis.

The value of value of information: best informing research design and prioritization using current methods.

PubMed

Eckermann, Simon; Karnon, Jon; Willan, Andrew R

2010-01-01

Value of information (VOI) methods have been proposed as a systematic approach to inform optimal research design and prioritization. Four related questions arise that VOI methods could address. (i) Is further research for a health technology assessment (HTA) potentially worthwhile? (ii) Is the cost of a given research design less than its expected value? (iii) What is the optimal research design for an HTA? (iv) How can research funding be best prioritized across alternative HTAs? Following Occam's razor, we consider the usefulness of VOI methods in informing questions 1-4 relative to their simplicity of use. Expected value of perfect information (EVPI) with current information, while simple to calculate, is shown to provide neither a necessary nor a sufficient condition to address question 1, given that what EVPI needs to exceed varies with the cost of research design, which can vary from very large down to negligible. Hence, for any given HTA, EVPI does not discriminate, as it can be large and further research not worthwhile or small and further research worthwhile. In contrast, each of questions 1-4 are shown to be fully addressed (necessary and sufficient) where VOI methods are applied to maximize expected value of sample information (EVSI) minus expected costs across designs. In comparing complexity in use of VOI methods, applying the central limit theorem (CLT) simplifies analysis to enable easy estimation of EVSI and optimal overall research design, and has been shown to outperform bootstrapping, particularly with small samples. Consequently, VOI methods applying the CLT to inform optimal overall research design satisfy Occam's razor in both improving decision making and reducing complexity. Furthermore, they enable consideration of relevant decision contexts, including option value and opportunity cost of delay, time, imperfect implementation and optimal design across jurisdictions. More complex VOI methods such as bootstrapping of the expected value of

76 FR 52384 - Designation of Additional Entities Pursuant to Executive Order 13405

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-22

... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Designation of Additional Entities... Assets Control (``OFAC'') is publishing the names of four newly-designated entities whose property and... the Director of OFAC of the four entities identified in this notice, pursuant to Executive [[Page...

77 FR 54946 - Additional Designations of Individuals Pursuant to Executive Order 13581

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Additional Designations of Individuals... the names of five individuals whose property and interests in property have been blocked pursuant to... Order''). DATES: The designation by the Director of OFAC of the five individuals identified in this...

Design of a mechanical system in gait rehabilitation with progressive addition of weight

NASA Astrophysics Data System (ADS)

Braidot, Ariel A. A.; Aleman, Guillermo L.

2011-12-01

In this paper we designed and developed a mechanical device for gait rehabilitation based on the application of "partial body weight reduction therapy". An evaluation of the characteristics of devices based on this therapy currently available on the market was carried out obtaining information of the different mechanisms used in it. The device was designed to adapt to different height and weight of patients and to be used with additional equipment in gait rehabilitation, for example, treadmills, elliptical trainers and vertical scalers. It was envisaged to be used by patients with asymmetry in the lower extremities capabilities. We developed a stable structure in steel ASTM A36 which does not depend on the building conditions of the installation site. RamAdvanse software was used to calculate structural stability. A winch with automatic brake mechanism was used to raise/lower the patient, who was tied to a comfortable harness which provided safety to the patient and therapist. It was possible to quantify precisely, using counterweights, the weight borne by the patient during therapy. We obtained a small-sized and ergonomic low-cost prototype, with similar features to those currently considered cutting-edge devices.

Contract Design: The problem of information asymmetry

PubMed Central

Amelung, Volker E.; Juhnke, Christin

2018-01-01

Introduction: Integrated care systems are advocated as an effective method of improving the performance of healthcare systems. These systems outline a payment and care delivery model that intends to tie provider reimbursements to predefined quality metrics. Little is known about the contractual design and the main challenges of delegating “accountability” to these new kinds of organisations and/or contracts. The research question in this article focuses on how healthcare contracts can look like and which possible problems arise in designing such contracts. In this a special interest is placed on information asymmetries. Methods: A comprehensive literature review on methods of designing contracts in Integrated Care was conducted. This article is the first in a row of three that all contribute to a specific issue in designing healthcare contracts. Starting with the organisation of contracts and information asymmetries, part 2 focusses on financial options and risks and part 3 finally concludes with the question of risk management and evaluation. Results: Healthcare contracting between providers and payers will have a major impact on the overall design of future healthcare systems. If Integrated care systems or any other similar concept of care delivery are to be contracted directly by payers to manage the continuum of care the costs of market utilisation play an essential role. Transaction costs also arise in the course of the negotiation and implementation of contracts. These costs are the reason why it is generally not possible to conclude perfect (complete) contracts. Problems with asymmetric distribution of information can relate to the situation before a contract is concluded (adverse selection) and after conclusion of a contract (moral hazard). Discussion and Conclusions: Information asymmetries are seen as a major obstacle to the efficient operation of integrated care programmes. Coordination and motivation problems cannot be solved at no-costs. The

Contract Design: The problem of information asymmetry.

PubMed

Mühlbacher, Axel C; Amelung, Volker E; Juhnke, Christin

2018-01-12

Integrated care systems are advocated as an effective method of improving the performance of healthcare systems. These systems outline a payment and care delivery model that intends to tie provider reimbursements to predefined quality metrics. Little is known about the contractual design and the main challenges of delegating "accountability" to these new kinds of organisations and/or contracts. The research question in this article focuses on how healthcare contracts can look like and which possible problems arise in designing such contracts. In this a special interest is placed on information asymmetries. A comprehensive literature review on methods of designing contracts in Integrated Care was conducted. This article is the first in a row of three that all contribute to a specific issue in designing healthcare contracts. Starting with the organisation of contracts and information asymmetries, part 2 focusses on financial options and risks and part 3 finally concludes with the question of risk management and evaluation. Healthcare contracting between providers and payers will have a major impact on the overall design of future healthcare systems. If Integrated care systems or any other similar concept of care delivery are to be contracted directly by payers to manage the continuum of care the costs of market utilisation play an essential role. Transaction costs also arise in the course of the negotiation and implementation of contracts. These costs are the reason why it is generally not possible to conclude perfect (complete) contracts. Problems with asymmetric distribution of information can relate to the situation before a contract is concluded (adverse selection) and after conclusion of a contract (moral hazard). Information asymmetries are seen as a major obstacle to the efficient operation of integrated care programmes. Coordination and motivation problems cannot be solved at no-costs. The presented problems in the design of selective individual contracts

40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

Code of Federal Regulations, 2013 CFR

2013-07-01

... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

Code of Federal Regulations, 2010 CFR

2010-07-01

... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

Code of Federal Regulations, 2014 CFR

2014-07-01

... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

Code of Federal Regulations, 2012 CFR

2012-07-01

... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

Code of Federal Regulations, 2011 CFR

2011-07-01

... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

NCRETURN Computer Program for Evaluating Investments Revised to Provide Additional Information

Treesearch

Allen L. Lundgren; Dennis L. Schweitzer

1971-01-01

Reports a modified version of NCRETURN, a computer program for evauating forestry investments. The revised version, RETURN, provides additional information about each investment, including future net worths and benefit-cost ratios, with no added input.

INCEPTION, DESIGN AND IMPLEMENTATION OF A MANAGEMENT INFORMATION SYSTEM.

DTIC Science & Technology

The purpose of this paper is to develop a uniform systematic approach to the design and implementation of a management information system . In recent...directed towards the design of a management information system . To this end - the creaction of such a document - is this paper dedicated. The...inception to successful implementation of a management information system . Many factors must be considered while applying this procedure, e.g., complexity

A mobile Nursing Information System based on human-computer interaction design for improving quality of nursing.

PubMed

Su, Kuo-Wei; Liu, Cheng-Li

2012-06-01

A conventional Nursing Information System (NIS), which supports the role of nurse in some areas, is typically deployed as an immobile system. However, the traditional information system can't response to patients' conditions in real-time, causing delays on the availability of this information. With the advances of information technology, mobile devices are increasingly being used to extend the human mind's limited capacity to recall and process large numbers of relevant variables and to support information management, general administration, and clinical practice. Unfortunately, there have been few studies about the combination of a well-designed small-screen interface with a personal digital assistant (PDA) in clinical nursing. Some researchers found that user interface design is an important factor in determining the usability and potential use of a mobile system. Therefore, this study proposed a systematic approach to the development of a mobile nursing information system (MNIS) based on Mobile Human-Computer Interaction (M-HCI) for use in clinical nursing. The system combines principles of small-screen interface design with user-specified requirements. In addition, the iconic functions were designed with metaphor concept that will help users learn the system more quickly with less working-memory. An experiment involving learnability testing, thinking aloud and a questionnaire investigation was conducted for evaluating the effect of MNIS on PDA. The results show that the proposed MNIS is good on learning and higher satisfaction on symbol investigation, terminology and system information.

Designed Natural Spaces: Informal Gardens Are Perceived to Be More Restorative than Formal Gardens.

PubMed

Twedt, Elyssa; Rainey, Reuben M; Proffitt, Dennis R

2016-01-01

Experimental research shows that there are perceived and actual benefits to spending time in natural spaces compared to urban spaces, such as reduced cognitive fatigue, improved mood, and reduced stress. Whereas past research has focused primarily on distinguishing between distinct categories of spaces (i.e., nature vs. urban), less is known about variability in perceived restorative potential of environments within a particular category of outdoor spaces, such as gardens. Conceptually, gardens are often considered to be restorative spaces and to contain an abundance of natural elements, though there is great variability in how gardens are designed that might impact their restorative potential. One common practice for classifying gardens is along a spectrum ranging from "formal or geometric" to "informal or naturalistic," which often corresponds to the degree to which built or natural elements are present, respectively. In the current study, we tested whether participants use design informality as a cue to predict perceived restorative potential of different gardens. Participants viewed a set of gardens and rated each on design informality, perceived restorative potential, naturalness, and visual appeal. Participants perceived informal gardens to have greater restorative potential than formal gardens. In addition, gardens that were more visually appealing and more natural-looking were perceived to have greater restorative potential than less visually appealing and less natural gardens. These perceptions and precedents are highly relevant for the design of gardens and other similar green spaces intended to provide relief from stress and to foster cognitive restoration.

Information measures in nonlinear experimental design

NASA Technical Reports Server (NTRS)

Niple, E.; Shaw, J. H.

1980-01-01

Some different approaches to the problem of designing experiments which estimate the parameters of nonlinear models are discussed. The assumption in these approaches that the information in a set of data can be represented by a scalar is criticized, and the nonscalar discrimination information is proposed as the proper measure to use. The two-step decay example in Box and Lucas (1959) is used to illustrate the main points of the discussion.

Scenario-based design: a method for connecting information system design with public health operations and emergency management.

PubMed

Reeder, Blaine; Turner, Anne M

2011-12-01

Responding to public health emergencies requires rapid and accurate assessment of workforce availability under adverse and changing circumstances. However, public health information systems to support resource management during both routine and emergency operations are currently lacking. We applied scenario-based design as an approach to engage public health practitioners in the creation and validation of an information design to support routine and emergency public health activities. Using semi-structured interviews we identified the information needs and activities of senior public health managers of a large municipal health department during routine and emergency operations. Interview analysis identified 25 information needs for public health operations management. The identified information needs were used in conjunction with scenario-based design to create 25 scenarios of use and a public health manager persona. Scenarios of use and persona were validated and modified based on follow-up surveys with study participants. Scenarios were used to test and gain feedback on a pilot information system. The method of scenario-based design was applied to represent the resource management needs of senior-level public health managers under routine and disaster settings. Scenario-based design can be a useful tool for engaging public health practitioners in the design process and to validate an information system design. Copyright © 2011 Elsevier Inc. All rights reserved.

Scenario-based design: A method for connecting information system design with public health operations and emergency management

PubMed Central

Reeder, Blaine; Turner, Anne M

2011-01-01

Responding to public health emergencies requires rapid and accurate assessment of workforce availability under adverse and changing circumstances. However, public health information systems to support resource management during both routine and emergency operations are currently lacking. We applied scenario-based design as an approach to engage public health practitioners in the creation and validation of an information design to support routine and emergency public health activities. Methods: Using semi-structured interviews we identified the information needs and activities of senior public health managers of a large municipal health department during routine and emergency operations. Results: Interview analysis identified twenty-five information needs for public health operations management. The identified information needs were used in conjunction with scenario-based design to create twenty-five scenarios of use and a public health manager persona. Scenarios of use and persona were validated and modified based on follow-up surveys with study participants. Scenarios were used to test and gain feedback on a pilot information system. Conclusion: The method of scenario-based design was applied to represent the resource management needs of senior-level public health managers under routine and disaster settings. Scenario-based design can be a useful tool for engaging public health practitioners in the design process and to validate an information system design. PMID:21807120

Making Informed Decisions: The Role of Information Literacy in Ethical and Effective Engineering Design

ERIC Educational Resources Information Center

Fosmire, Michael

2017-01-01

Engineering designers must make evidence-based decisions when applying the practical tools and techniques of their discipline to human problems. Information literacy provides a structure for determining information gaps, locating appropriate and relevant information, applying that information effectively, and documenting and managing the knowledge…

7 CFR 868.314 - Grade designation and other certificate information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Milled Rice Principles Governing Application of Standards § 868.314 Grade designation and other certificate information. (a) Milled rice. The grade designation for all classes of Milled rice shall be... Milled rice information. For the class Mixed Milled rice, the following information shall be included in...

7 CFR 868.314 - Grade designation and other certificate information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Milled Rice Principles Governing Application of Standards § 868.314 Grade designation and other certificate information. (a) Milled rice. The grade designation for all classes of Milled rice shall be... Milled rice information. For the class Mixed Milled rice, the following information shall be included in...

STEADY-STATE DESIGN OF VERTICAL WELLS FOR LIQUIDS ADDITION AT BIOREACTOR LANDFILLS

EPA Science Inventory

This paper presents design charts that a landfill engineer can use for the design of a vertical well system for liquids addition at bioreactor landfills. The flow rate and lateral and vertical zones of impact of a vertical well were estimated as a function of input variables su...

World Key Information Service System Designed For EPCOT Center

NASA Astrophysics Data System (ADS)

Kelsey, J. A.

1984-03-01

An advanced Bell Laboratories and Western Electric designed electronic information retrieval system utilizing the latest Information Age technologies, and a fiber optic transmission system is featured at the Walt Disney World Resort's newest theme park - The Experimental Prototype Community of Tomorrow (EPCOT Center). The project is an interactive audio, video and text information system that is deployed at key locations within the park. The touch sensitive terminals utilizing the ARIEL (Automatic Retrieval of Information Electronically) System is interconnected by a Western Electric designed and manufactured lightwave transmission system.

Surface-specific additive manufacturing test artefacts

NASA Astrophysics Data System (ADS)

Townsend, Andrew; Racasan, Radu; Blunt, Liam

2018-06-01

Many test artefact designs have been proposed for use with additive manufacturing (AM) systems. These test artefacts have primarily been designed for the evaluation of AM form and dimensional performance. A series of surface-specific measurement test artefacts designed for use in the verification of AM manufacturing processes are proposed here. Surface-specific test artefacts can be made more compact because they do not require the large dimensions needed for accurate dimensional and form measurements. The series of three test artefacts are designed to provide comprehensive information pertaining to the manufactured surface. Measurement possibilities include deviation analysis, surface texture parameter data generation, sub-surface analysis, layer step analysis and build resolution comparison. The test artefacts are designed to provide easy access for measurement using conventional surface measurement techniques, for example, focus variation microscopy, stylus profilometry, confocal microscopy and scanning electron microscopy. Additionally, the test artefacts may be simply visually inspected as a comparative tool, giving a fast indication of process variation between builds. The three test artefacts are small enough to be included in every build and include built-in manufacturing traceability information, making them a convenient physical record of the build.

75 FR 77645 - Agency Information Collection Activities; Proposed Collection; Comment Request; Color Additive...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-13

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0622] Agency Information Collection Activities; Proposed Collection; Comment Request; Color Additive... collection provisions of FDA's regulations governing batch certification of color additives manufactured for...

Progressive addition spectacle lenses: Design preferences and head movements while reading

NASA Astrophysics Data System (ADS)

Preston, Julie Lynn

In a subjective preference study, two key progressive addition lens parameters, near zone width and corridor length, were varied in a double-masked, randomized, clinical trial of 49 patients. Each subject received a complete eye examination and a new frame. Each wore 6 pairs of lenses for one week at a time and completed questionnaires relating to vision, adaptation, and satisfaction. The preferred lens was identified from the three near zone width lenses and from the three corridor length lenses. Patient characteristics were analyzed for their effect on design preference. Satisfaction ratings following a brief experience with each design were compared to ratings after one week of wear in order to ascertain the predictability of initial impressions. One lens design appeared twice in the preference trial, providing an assessment of the repeatability of the rating instrument. The lens design with the widest near zone was rated significantly lower than the other near zone width designs for nearly every question relating to vision, adaptation, and satisfaction. This lens was also least preferred of all the designs. Preferences for corridor length were evenly distributed among the three designs. Of patient characteristics, years of progressive addition lens wear and gender significantly affected design preference in this population. Initial impressions were not predictive of satisfaction after a week of wear. The rating instrument was judged to have low repeatability. In the head movement portion of the study, 18 participants from the preference study wore the three near zone width designs while reading three paragraphs of varying print size. From a 20 second recording for each of three different paragraphs with each lens, measures of head rotation and posture were collected. The amplitude of head rotation was significantly affected by print size but not by lens design. The effective zone widths on the lenses scanned by the eyes and the locations of the reading levels

An Analysis of Risk and Function Information in Early Stage Design

NASA Technical Reports Server (NTRS)

Barrientos, Francesca; Tumer, Irem; Grantham, Katie; VanWie, Michael; Stone, Robert

2005-01-01

The concept of function offers a high potential for thinking and reasoning about designs as well as providing a common thread for relating together other design information. This paper focuses specifically on the relation between function and risk by examining how this information is addressed for a design team conducting early stage design for space missions. Risk information is decomposed into a set of key attributes which are then used to scrutinize the risk information using three approaches from the pragmatics sub-field of linguistics: i) Gricean, ii) Relevance Theory, and Functional Analysis. Results of this linguistics-based approach descriptively account for the context of designer communication with respect to function and risk, and offer prescriptive guidelines for improving designer communication.

Additional Remarks on Designing Category-Level Attributes for Discriminative Visual Recognition

DTIC Science & Technology

2013-01-01

Discriminative Visual Recognition ∗ Felix X. Yu†, Liangliang Cao§, Rogerio S. Feris§, John R. Smith§, Shih-Fu Chang† † Columbia University § IBM T. J...for Designing Category-Level Attributes for Dis- criminative Visual Recognition [3]. We first provide an overview of the proposed ap- proach in...2013 to 00-00-2013 4. TITLE AND SUBTITLE Additional Remarks on Designing Category-Level Attributes for Discriminative Visual Recognition 5a

Informational Report on Lighting Design for Midblock Crosswalks

DOT National Transportation Integrated Search

2008-04-01

This report provides information on lighting parameters and design criteria that should be considered when installing fixed roadway lighting for midblock crosswalks. The information is based on static and dynamic experiments of driver performance wit...

Topology optimization and laser additive manufacturing in design process of efficiency lightweight aerospace parts

NASA Astrophysics Data System (ADS)

Fetisov, K. V.; Maksimov, P. V.

2018-05-01

The paper presents the application of topology optimization and laser additive manufacturing in the design of lightweight aerospace parts. At the beginning a brief overview of the topology optimization algorithm SIMP is given, one of the most commonly used algorithm in FEA software. After that, methodology of parts design with using topology optimization is discussed as well as issues related to designing for additive manufacturing. In conclusion, the practical application of the proposed methodologies is presented using the example of one complex assembly unit. As a result of the new design approach, the mass of product was reduced five times, and twenty parts were replaced by one.

Information Presentation

NASA Technical Reports Server (NTRS)

Holden, Kritina L.; Thompson, Shelby G.; Sandor, Aniko; McCann, Robert S.; Kaiser, Mary K.; Adelstein, Barnard D.; Begault, Durand R.; Beutter, Brent R.; Stone, Leland S.; Godfroy, Martine

2009-01-01

The goal of the Information Presentation Directed Research Project (DRP) is to address design questions related to the presentation of information to the crew. In addition to addressing display design issues associated with information formatting, style, layout, and interaction, the Information Presentation DRP is also working toward understanding the effects of extreme environments encountered in space travel on information processing. Work is also in progress to refine human factors-based design tools, such as human performance modeling, that will supplement traditional design techniques and help ensure that optimal information design is accomplished in the most cost-efficient manner. The major areas of work, or subtasks, within the Information Presentation DRP for FY10 are: 1) Displays, 2) Controls, 3) Procedures and Fault Management, and 4) Human Performance Modeling. The poster will highlight completed and planned work for each subtask.

Designed Natural Spaces: Informal Gardens Are Perceived to Be More Restorative than Formal Gardens

PubMed Central

Twedt, Elyssa; Rainey, Reuben M.; Proffitt, Dennis R.

2016-01-01

Experimental research shows that there are perceived and actual benefits to spending time in natural spaces compared to urban spaces, such as reduced cognitive fatigue, improved mood, and reduced stress. Whereas past research has focused primarily on distinguishing between distinct categories of spaces (i.e., nature vs. urban), less is known about variability in perceived restorative potential of environments within a particular category of outdoor spaces, such as gardens. Conceptually, gardens are often considered to be restorative spaces and to contain an abundance of natural elements, though there is great variability in how gardens are designed that might impact their restorative potential. One common practice for classifying gardens is along a spectrum ranging from “formal or geometric” to “informal or naturalistic,” which often corresponds to the degree to which built or natural elements are present, respectively. In the current study, we tested whether participants use design informality as a cue to predict perceived restorative potential of different gardens. Participants viewed a set of gardens and rated each on design informality, perceived restorative potential, naturalness, and visual appeal. Participants perceived informal gardens to have greater restorative potential than formal gardens. In addition, gardens that were more visually appealing and more natural-looking were perceived to have greater restorative potential than less visually appealing and less natural gardens. These perceptions and precedents are highly relevant for the design of gardens and other similar green spaces intended to provide relief from stress and to foster cognitive restoration. PMID:26903899

Exploring the Use of Wikis for Information Sharing in Interdisciplinary Design

ERIC Educational Resources Information Center

Phuwanartnurak, Jiranida

2013-01-01

Interdisciplinary design presents challenges in design collaboration due to the difficulty in communicating and coordinating among disciplines. Many tools have been developed and used to support information sharing in design, and the use of Web technology is becoming increasingly important for the sharing of information within design teams. Wikis…

Oak Ridge Environmental Information System (OREIS) functional system design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birchfield, T.E.; Brown, M.O.; Coleman, P.R.

1994-03-01

The OREIS Functional System Design document provides a detailed functional description of the Oak Ridge Environmental Information System (OREIS). It expands the system requirements defined in the OREIS Phase 1-System Definition Document (ES/ER/TM-34). Documentation of OREIS development is based on the Automated Data Processing System Development Methodology, a Martin Marietta Energy Systems, Inc., procedure written to assist in developing scientific and technical computer systems. This document focuses on the development of the functional design of the user interface, which includes the integration of commercial applications software. The data model and data dictionary are summarized briefly; however, the Data Management Planmore » for OREIS (ES/ER/TM-39), a companion document to the Functional System Design document, provides the complete data dictionary and detailed descriptions of the requirements for the data base structure. The OREIS system will provide the following functions, which are executed from a Menu Manager: (1) preferences, (2) view manager, (3) macro manager, (4) data analysis (assisted analysis and unassisted analysis), and (5) spatial analysis/map generation (assisted ARC/INFO and unassisted ARC/INFO). Additional functionality includes interprocess communications, which handle background operations of OREIS.« less

16 CFR 1102.24 - Designation of confidential information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... ACT REGULATIONS PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Procedural... allegedly confidential information is not placed in the database, a request for designation of confidential... publication in the Database until it makes a determination regarding confidential treatment. (e) Assistance...

16 CFR 1102.24 - Designation of confidential information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... ACT REGULATIONS PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Procedural... allegedly confidential information is not placed in the database, a request for designation of confidential... publication in the Database until it makes a determination regarding confidential treatment. (e) Assistance...

[Information value of "additional tasks" method to evaluate pilot's work load].

PubMed

Gorbunov, V V

2005-01-01

"Additional task" method was used to evaluate pilot's work load in prolonged flight. Calculated through durations of latent periods of motor responses, quantitative criterion of work load is more informative for objective evaluation of pilot's involvement in his piloting functions rather than of other registered parameters.

Applying Additive Manufacturing to a New Liquid Oxygen Turbopump Design

NASA Technical Reports Server (NTRS)

O'Neal, Derek

2016-01-01

A liquid oxygen turbopump has been designed at Marshall Space Flight Center as part of the in-house, Advanced Manufacturing Demonstrator Engine (AMDE) project. Additive manufacturing, specifically direct metal laser sintering (DMLS) of Inconel 718, is used for 77% of the parts by mass. These parts include the impeller, turbine components, and housings. The near-net shape DMLS parts have been delivered and final machining is underway. Fabrication of the traditionally manufactured hardware is also proceeding. Testing in liquid oxygen is planned for Q2 of FY2017. This topic explores the design of the turbopump along with fabrication and material testing of the DMLS hardware.

Design and implementation of a smart card based healthcare information system.

PubMed

Kardas, Geylani; Tunali, E Turhan

2006-01-01

Smart cards are used in information technologies as portable integrated devices with data storage and data processing capabilities. As in other fields, smart card use in health systems became popular due to their increased capacity and performance. Their efficient use with easy and fast data access facilities leads to implementation particularly widespread in security systems. In this paper, a smart card based healthcare information system is developed. The system uses smart card for personal identification and transfer of health data and provides data communication via a distributed protocol which is particularly developed for this study. Two smart card software modules are implemented that run on patient and healthcare professional smart cards, respectively. In addition to personal information, general health information about the patient is also loaded to patient smart card. Health care providers use their own smart cards to be authenticated on the system and to access data on patient cards. Encryption keys and digital signature keys stored on smart cards of the system are used for secure and authenticated data communication between clients and database servers over distributed object protocol. System is developed on Java platform by using object oriented architecture and design patterns.

47 CFR 54.202 - Additional requirements for Commission designation of eligible telecommunications carriers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 3 2014-10-01 2014-10-01 false Additional requirements for Commission designation of eligible telecommunications carriers. 54.202 Section 54.202 Telecommunication FEDERAL... telecommunications carriers. (a) In order to be designated an eligible telecommunications carrier under section 214(e...

47 CFR 54.202 - Additional requirements for Commission designation of eligible telecommunications carriers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 3 2012-10-01 2012-10-01 false Additional requirements for Commission designation of eligible telecommunications carriers. 54.202 Section 54.202 Telecommunication FEDERAL... telecommunications carriers. (a) In order to be designated an eligible telecommunications carrier under section 214(e...

47 CFR 54.202 - Additional requirements for Commission designation of eligible telecommunications carriers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 3 2013-10-01 2013-10-01 false Additional requirements for Commission designation of eligible telecommunications carriers. 54.202 Section 54.202 Telecommunication FEDERAL... telecommunications carriers. (a) In order to be designated an eligible telecommunications carrier under section 214(e...

16 CFR 1102.24 - Designation of confidential information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ACT REGULATIONS PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE (Eff. Jan. 10, 2011... allegedly confidential information is not placed in the database, a request for designation of confidential... publication in the Database until it makes a determination regarding confidential treatment. (e) Assistance...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2012 CFR

2012-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2013 CFR

2013-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2014 CFR

2014-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

Suggestion of Design Evaluation Plan based on Star Life Cycle to introduce the Information Minimalism Concept of KOREA Nuclear Plant

NASA Astrophysics Data System (ADS)

Jang, Gwi-sook; Lee, Seung-min; Park, Gee-yong

2018-01-01

The design of Korea Nuclear Power Plant (NPP) main control rooms (MCR) has been changed to be fully digitalized. Five or six display devices are assigned to each operator in NPP MCR to provide the information of safety parameter and plant status, and various control functions by connecting computerized control devices. Under this circumstance, the distributed displays can induce a dispersion of the operators' attention and increase the workload while conducting monitoring and control tasks efficiently. In addition, to support human operators to reduce their workload and increase the performance, the concepts of the ecological interface design (EID) and the operator-centered design were applied to the design HMI display. However these designs are applied to a limited set of screens and did not differ largely from the traditional HMI design in that the layout of the information is somewhere similar to P&IDs. In this paper, we propose a design evaluation plan based on star life cycle to introduce the information minimalism concept for designing an HMI display.

Information for the user in design of intelligent systems

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.

1993-01-01

Recommendations are made for improving intelligent system reliability and usability based on the use of information requirements in system development. Information requirements define the task-relevant messages exchanged between the intelligent system and the user by means of the user interface medium. Thus, these requirements affect the design of both the intelligent system and its user interface. Many difficulties that users have in interacting with intelligent systems are caused by information problems. These information problems result from the following: (1) not providing the right information to support domain tasks; and (2) not recognizing that using an intelligent system introduces new user supervisory tasks that require new types of information. These problems are especially prevalent in intelligent systems used for real-time space operations, where data problems and unexpected situations are common. Information problems can be solved by deriving information requirements from a description of user tasks. Using information requirements embeds human-computer interaction design into intelligent system prototyping, resulting in intelligent systems that are more robust and easier to use.

43 CFR 3515.23 - May BLM require me to submit additional information?

Code of Federal Regulations, 2011 CFR

2011-10-01

... require me to submit additional information? Yes. You must be willing to provide geologic and economic data we need to determine the fair market value of your preference right or lease to be relinquished. ...

GIS Application System Design Applied to Information Monitoring

NASA Astrophysics Data System (ADS)

Qun, Zhou; Yujin, Yuan; Yuena, Kang

Natural environment information management system involves on-line instrument monitoring, data communications, database establishment, information management software development and so on. Its core lies in collecting effective and reliable environmental information, increasing utilization rate and sharing degree of environment information by advanced information technology, and maximizingly providing timely and scientific foundation for environmental monitoring and management. This thesis adopts C# plug-in application development and uses a set of complete embedded GIS component libraries and tools libraries provided by GIS Engine to finish the core of plug-in GIS application framework, namely, the design and implementation of framework host program and each functional plug-in, as well as the design and implementation of plug-in GIS application framework platform. This thesis adopts the advantages of development technique of dynamic plug-in loading configuration, quickly establishes GIS application by visualized component collaborative modeling and realizes GIS application integration. The developed platform is applicable to any application integration related to GIS application (ESRI platform) and can be as basis development platform of GIS application development.

76 FR 51125 - Additional Identifying Information Associated With Persons Whose Property and Interests in...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... Transnational Criminal Organizations.'' FOR FURTHER INFORMATION CONTACT: Assistant Director, Sanctions... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Additional Identifying Information... 13581of July 24, 2011, ``Blocking Property of Transnational Criminal Organizations.'' AGENCY: Office of...

Studying Upper-Limb Amputee Prosthesis Use to Inform Device Design

DTIC Science & Technology

2017-10-01

AWARD NUMBER: W81XWH-14-1-0277 TITLE: Studying Upper-Limb Amputee Prosthesis Use to Inform Device Design PRINCIPAL INVESTIGATOR: Aaron...Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704...Amputee Prosthesis Use to Inform Device Design 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Aaron Dollar, Adam Spiers

Data Requirements and the Basis for Designing Health Information Kiosks.

PubMed

Afzali, Mina; Ahmadi, Maryam; Mahmoudvand, Zahra

2017-09-01

Health kiosks are an innovative and cost-effective solution that organizations can easily implement to help educate people. To determine the data requirements and basis for designing health information kiosks as a new technology to maintain the health of society. By reviewing the literature, a list of information requirements was provided in 4 sections (demographic information, general information, diagnostic information and medical history), and questions related to the objectives, data elements, stakeholders, requirements, infrastructures and the applications of health information kiosks were provided. In order to determine the content validity of the designed set, the opinions of 2 physicians and 2 specialists in medical informatics were obtained. The test-retest method was used to measure its reliability. Data were analyzed using SPSS software. In the proposed model for Iran, 170 data elements in 6 sections were presented for experts' opinion, which ultimately, on 106 elements, a collective agreement was reached. To provide a model of health information kiosk, creating a standard data set is a critical point. According to a survey conducted on the various literature review studies related to the health information kiosk, the most important components of a health information kiosk include six categories; information needs, data elements, applications, stakeholders, requirements and infrastructure of health information kiosks that need to be considered when designing a health information kiosk.

49 CFR 40.331 - To what additional parties must employers and service agents release information?

Code of Federal Regulations, 2010 CFR

2010-10-01

... service agents release information? 40.331 Section 40.331 Transportation Office of the Secretary of... Release of Information § 40.331 To what additional parties must employers and service agents release information? As an employer or service agent you must release information under the following circumstances...

20 CFR 30.518 - Can OWCP require the recipient of the overpayment to submit additional financial information?

Code of Federal Regulations, 2010 CFR

2010-04-01

... overpayment to submit additional financial information? 30.518 Section 30.518 Employees' Benefits OFFICE OF... OWCP require the recipient of the overpayment to submit additional financial information? (a) The... specified by OWCP. This information is needed to determine whether or not recovery of an overpayment would...

20 CFR 30.518 - Can OWCP require the recipient of the overpayment to submit additional financial information?

Code of Federal Regulations, 2012 CFR

2012-04-01

... overpayment to submit additional financial information? 30.518 Section 30.518 Employees' Benefits OFFICE OF... OWCP require the recipient of the overpayment to submit additional financial information? (a) The... specified by OWCP. This information is needed to determine whether or not recovery of an overpayment would...

20 CFR 30.518 - Can OWCP require the recipient of the overpayment to submit additional financial information?

Code of Federal Regulations, 2011 CFR

2011-04-01

... overpayment to submit additional financial information? 30.518 Section 30.518 Employees' Benefits OFFICE OF... OWCP require the recipient of the overpayment to submit additional financial information? (a) The... specified by OWCP. This information is needed to determine whether or not recovery of an overpayment would...

7 CFR 868.211 - Grade designation and other certificate information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Rough Rice Principles Governing Application of Standards § 868.211 Grade designation and other certificate information. (a) Rough rice. The grade designation for all classes of Rough rice shall be included... statement of the milling yield. (b) Mixed rough rice information. For the class Mixed Rough rice, the...

7 CFR 868.211 - Grade designation and other certificate information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Rough Rice Principles Governing Application of Standards § 868.211 Grade designation and other certificate information. (a) Rough rice. The grade designation for all classes of Rough rice shall be included... statement of the milling yield. (b) Mixed rough rice information. For the class Mixed Rough rice, the...

Information Architecture without Internal Theory: An Inductive Design Process.

ERIC Educational Resources Information Center

Haverty, Marsha

2002-01-01

Suggests that information architecture design is primarily an inductive process, partly because it lacks internal theory and partly because it is an activity that supports emergent phenomena (user experiences) from basic design components. Suggests a resemblance to Constructive Induction, a design process that locates the best representational…

Understanding the nature of information seeking behavior in critical care: implications for the design of health information technology.

PubMed

Kannampallil, Thomas G; Franklin, Amy; Mishra, Rashmi; Almoosa, Khalid F; Cohen, Trevor; Patel, Vimla L

2013-01-01

Information in critical care environments is distributed across multiple sources, such as paper charts, electronic records, and support personnel. For decision-making tasks, physicians have to seek, gather, filter and organize information from various sources in a timely manner. The objective of this research is to characterize the nature of physicians' information seeking process, and the content and structure of clinical information retrieved during this process. Eight medical intensive care unit physicians provided a verbal think-aloud as they performed a clinical diagnosis task. Verbal descriptions of physicians' activities, sources of information they used, time spent on each information source, and interactions with other clinicians were captured for analysis. The data were analyzed using qualitative and quantitative approaches. We found that the information seeking process was exploratory and iterative and driven by the contextual organization of information. While there was no significant differences between the overall time spent paper or electronic records, there was marginally greater relative information gain (i.e., more unique information retrieved per unit time) from electronic records (t(6)=1.89, p=0.1). Additionally, information retrieved from electronic records was at a higher level (i.e., observations and findings) in the knowledge structure than paper records, reflecting differences in the nature of knowledge utilization across resources. A process of local optimization drove the information seeking process: physicians utilized information that maximized their information gain even though it required significantly more cognitive effort. Implications for the design of health information technology solutions that seamlessly integrate information seeking activities within the workflow, such as enriching the clinical information space and supporting efficient clinical reasoning and decision-making, are discussed. Copyright © 2012 Elsevier B.V. All

Measurement Matrix Design for Phase Retrieval Based on Mutual Information

NASA Astrophysics Data System (ADS)

Shlezinger, Nir; Dabora, Ron; Eldar, Yonina C.

2018-01-01

In phase retrieval problems, a signal of interest (SOI) is reconstructed based on the magnitude of a linear transformation of the SOI observed with additive noise. The linear transform is typically referred to as a measurement matrix. Many works on phase retrieval assume that the measurement matrix is a random Gaussian matrix, which, in the noiseless scenario with sufficiently many measurements, guarantees invertability of the transformation between the SOI and the observations, up to an inherent phase ambiguity. However, in many practical applications, the measurement matrix corresponds to an underlying physical setup, and is therefore deterministic, possibly with structural constraints. In this work we study the design of deterministic measurement matrices, based on maximizing the mutual information between the SOI and the observations. We characterize necessary conditions for the optimality of a measurement matrix, and analytically obtain the optimal matrix in the low signal-to-noise ratio regime. Practical methods for designing general measurement matrices and masked Fourier measurements are proposed. Simulation tests demonstrate the performance gain achieved by the proposed techniques compared to random Gaussian measurements for various phase recovery algorithms.

PCASSO: a design for secure communication of personal health information via the internet.

PubMed

Baker, D B; Masys, D R

1999-05-01

The Internet holds both promise and peril for the communications of person-identifiable health information. Because of technical features designed to promote accessibility and interoperability rather than security, Internet addressing conventions and transport protocols are vulnerable to compromise by malicious persons and programs. In addition, most commonly used personal computer (PC) operating systems currently lack the hardware-based system software protection and process isolation that are essential for ensuring the integrity of trusted applications. Security approaches designed for electronic commerce, that trade known security weaknesses for limited financial liability, are not sufficient for personal health data, where the personal damage caused by unintentional disclosure may be far more serious. To overcome these obstacles, we are developing and evaluating an Internet-based communications system called PCASSO (Patient-centered access to secure systems online) that applies state of the art security to health information. PCASSO includes role-based access control, multi-level security, strong device and user authentication, session-specific encryption and audit trails. Unlike Internet-based electronic commerce 'solutions,' PCASSO secures data end-to-end: in the server; in the data repository; across the network; and on the client. PCASSO is designed to give patients as well as providers access to personal health records via the Internet.

Half a degree additional warming, prognosis and projected impacts (HAPPI): background and experimental design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitchell, Daniel; AchutaRao, Krishna; Allen, Myles

The Intergovernmental Panel on Climate Change (IPCC) has accepted the invitation from the UNFCCC to provide a special report on the impacts of global warming of 1.5 °C above pre-industrial levels and on related global greenhouse-gas emission pathways. Many current experiments in, for example, the Coupled Model Inter-comparison Project (CMIP), are not specifically designed for informing this report. Here, we document the design of the half a degree additional warming, projections, prognosis and impacts (HAPPI) experiment. HAPPI provides a framework for the generation of climate data describing how the climate, and in particular extreme weather, might differ from the presentmore » day in worlds that are 1.5 and 2.0 °C warmer than pre-industrial conditions. Output from participating climate models includes variables frequently used by a range of impact models. The key challenge is to separate the impact of an additional approximately half degree of warming from uncertainty in climate model responses and internal climate variability that dominate CMIP-style experiments under low-emission scenarios.Large ensembles of simulations (> 50 members) of atmosphere-only models for three time slices are proposed, each a decade in length: the first being the most recent observed 10-year period (2006–2015), the second two being estimates of a similar decade but under 1.5 and 2 °C conditions a century in the future. We use the representative concentration pathway 2.6 (RCP2.6) to provide the model boundary conditions for the 1.5 °C scenario, and a weighted combination of RCP2.6 and RCP4.5 for the 2 °C scenario.« less

Half a degree additional warming, prognosis and projected impacts (HAPPI): background and experimental design

DOE PAGES

Mitchell, Daniel; AchutaRao, Krishna; Allen, Myles; ...

2017-02-08

The Intergovernmental Panel on Climate Change (IPCC) has accepted the invitation from the UNFCCC to provide a special report on the impacts of global warming of 1.5 °C above pre-industrial levels and on related global greenhouse-gas emission pathways. Many current experiments in, for example, the Coupled Model Inter-comparison Project (CMIP), are not specifically designed for informing this report. Here, we document the design of the half a degree additional warming, projections, prognosis and impacts (HAPPI) experiment. HAPPI provides a framework for the generation of climate data describing how the climate, and in particular extreme weather, might differ from the presentmore » day in worlds that are 1.5 and 2.0 °C warmer than pre-industrial conditions. Output from participating climate models includes variables frequently used by a range of impact models. The key challenge is to separate the impact of an additional approximately half degree of warming from uncertainty in climate model responses and internal climate variability that dominate CMIP-style experiments under low-emission scenarios.Large ensembles of simulations (> 50 members) of atmosphere-only models for three time slices are proposed, each a decade in length: the first being the most recent observed 10-year period (2006–2015), the second two being estimates of a similar decade but under 1.5 and 2 °C conditions a century in the future. We use the representative concentration pathway 2.6 (RCP2.6) to provide the model boundary conditions for the 1.5 °C scenario, and a weighted combination of RCP2.6 and RCP4.5 for the 2 °C scenario.« less

Design Principles for the Information Architecture of a SMET Education Digital Library.

ERIC Educational Resources Information Center

Dong, Andy; Agogino, Alice M.

This implementation paper introduces principles for the information architecture of an educational digital library, principles that address the distinction between designing digital libraries for education and designing digital libraries for information retrieval in general. Design is a key element of any successful product. Good designers and…

DESIGN INFORMATION ON FINE PORE AERATION SYSTEMS

EPA Science Inventory

Field studies were conducted over several years at municipal wastewater treatment plants employing line pore diffused aeration systems. These studies were designed to produce reliable information on the performance and operational requirements of fine pore devices under process ...

Design and calibration of zero-additional-phase SPIDER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baum, Peter; Riedle, Eberhard

2005-09-01

Zero-additional-phase spectral phase interferometry for direct electric field reconstruction (ZAP-SPIDER) is a novel technique for measuring the temporal shape and phase of ultrashort optical pulses directly at the interaction point of a spectroscopic experiment. The scheme is suitable for an extremely wide wavelength region from the ultraviolet to the near infrared. We present a comprehensive description of the experimental setup and design guidelines to effectively apply the technique to various wavelengths and pulse durations. The calibration of the setup and procedures to check the consistency of the measurement are discussed in detail. We show experimental data for various center wavelengthsmore » and pulse durations down to 7 fs to verify the applicability to a wide range of pulse parameters.« less

OPERATIONS RESEARCH IN THE DESIGN OF MANAGEMENT INFORMATION SYSTEMS

DTIC Science & Technology

management information systems is concerned with the identification and detailed specification of the information and data processing...of advanced data processing techniques in management information systems today, the close coordination of operations research and data systems activities has become a practical necessity for the modern business firm.... information systems in which mathematical models are employed as the basis for analysis and systems design. Operations research provides a

Evidence-Based Design and Research-Informed Design: What's the Difference? Conceptual Definitions and Comparative Analysis.

PubMed

Peavey, Erin; Vander Wyst, Kiley B

2017-10-01

This article provides critical examination and comparison of the conceptual meaning and underlying assumptions of the concepts evidence-based design (EBD) and research-informed design (RID) in order to facilitate practical use and theoretical development. In recent years, EBD has experienced broad adoption, yet it has been simultaneously critiqued for rigidity and misapplication. Many practitioners are gravitating to the term RID to describe their method of integrating knowledge into the design process. However, the term RID lacks a clear definition and the blurring of terms has the potential to weaken advances made integrating research into practice. Concept analysis methods from Walker and Avant were used to define the concepts for comparison. Conceptual definitions, process descriptions, examples (i.e., model cases), and methods of evaluation are offered for EBD and RID. Although EBD and RID share similarities in meaning, the two terms are distinct. When comparing evidence based (EB) and research informed, EB is a broad base of information types (evidence) that are narrowly applied (based), while the latter references a narrow slice of information (research) that is broadly applied (informed) to create an end product of design. Much of the confusion between the use of the concepts EBD and RID arises out of differing perspectives between the way practitioners and academics understand the underlying terms. The authors hope this article serves to generate thoughtful dialogue, which is essential to the development of a discipline, and look forward to the contribution of the readership.

Design and development of a layer-based additive manufacturing process for the realization of metal parts of designed mesostructure

NASA Astrophysics Data System (ADS)

Williams, Christopher Bryant

Low-density cellular materials, metallic bodies with gaseous voids, are a unique class of materials that are characterized by their high strength, low mass, good energy absorption characteristics, and good thermal and acoustic insulation properties. In an effort to take advantage of this entire suite of positive mechanical traits, designers are tailoring the cellular mesostructure for multiple design objectives. Unfortunately, existing cellular material manufacturing technologies limit the design space as they are limited to certain part mesostructure, material type, and macrostructure. The opportunity that exists to improve the design of existing products, and the ability to reap the benefits of cellular materials in new applications is the driving force behind this research. As such, the primary research goal of this work is to design, embody, and analyze a manufacturing process that provides a designer the ability to specify the material type, material composition, void morphology, and mesostructure topology for any conceivable part geometry. The accomplishment of this goal is achieved in three phases of research: (1) Design---Following a systematic design process and a rigorous selection exercise, a layer-based additive manufacturing process is designed that is capable of meeting the unique requirements of fabricating cellular material geometry. Specifically, metal parts of designed mesostructure are fabricated via three-dimensional printing of metal oxide ceramic powder followed by post-processing in a reducing atmosphere. (2) Embodiment ---The primary research hypothesis is verified through the use of the designed manufacturing process chain to successfully realize metal parts of designed mesostructure. (3) Modeling & Evaluation ---The designed manufacturing process is modeled in this final research phase so as to increase understanding of experimental results and to establish a foundation for future analytical modeling research. In addition to an analysis of

A knowledge-based system design/information tool for aircraft flight control systems

NASA Technical Reports Server (NTRS)

Mackall, Dale A.; Allen, James G.

1989-01-01

Research aircraft have become increasingly dependent on advanced control systems to accomplish program goals. These aircraft are integrating multiple disciplines to improve performance and satisfy research objectives. This integration is being accomplished through electronic control systems. Because of the number of systems involved and the variety of engineering disciplines, systems design methods and information management have become essential to program success. The primary objective of the system design/information tool for aircraft flight control system is to help transfer flight control system design knowledge to the flight test community. By providing all of the design information and covering multiple disciplines in a structured, graphical manner, flight control systems can more easily be understood by the test engineers. This will provide the engineers with the information needed to thoroughly ground test the system and thereby reduce the likelihood of serious design errors surfacing in flight. The secondary objective is to apply structured design techniques to all of the design domains. By using the techniques in the top level system design down through the detailed hardware and software designs, it is hoped that fewer design anomalies will result. The flight test experiences of three highly complex, integrated aircraft programs are reviewed: the X-29 forward-swept wing, the advanced fighter technology integration (AFTI) F-16, and the highly maneuverable aircraft technology (HiMAT) program. Significant operating anomalies and the design errors which cause them, are examined to help identify what functions a system design/information tool should provide to assist designers in avoiding errors.

77 FR 2545 - Designation of a Class of Employees for Addition to the Special Exposure Cohort

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-18

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Designation of a Class of Employees for Addition to the... of Health and Human Services (HHS). ACTION: Notice. SUMMARY: HHS gives notice of a decision to designate a class of employees from the Pantex Plant in Amarillo, Texas, as an addition to the Special...

Design and Testing of a Hall Effect Thruster with Additively Manufactured Components

NASA Astrophysics Data System (ADS)

Hopping, Ethan

The UAH-78AM is a low-power Hall effect thruster developed at the University of Alabama in Huntsville to study the application of low-cost additive manufacturing in the design and fabrication of Hall thrusters. The goal of this project is to assess the feasibility of using unconventional materials to produce a low-cost functioning Hall effect thruster and consider how additive manufacturing can expand the design space and provide other benefits. The thruster features channel walls and a propellant distributor that were manufactured using 3D printing with a variety of materials including ABS, ULTEM, and glazed ceramic. A version of the thruster was tested at NASA Glenn Research Center to obtain performance metrics and to validate the ability of the thruster to produce thrust and sustain a discharge. The design of the thruster and the transient performance measurements are presented here. Measured thrust ranged from 17.2 mN to 30.4 mN over a discharge power of 280 W to 520 W with an anode Isp range of 870 s to 1450 s. Temperature limitations of materials used for the channel walls and propellant distributor limit the ability to run the thruster at thermal steady-state. While the current thruster design is not yet ready for continuous operation, revisions to the device that could enable longer duration tests are discussed.

33 CFR 148.108 - What if a Federal or State agency or other interested party requests additional information?

Code of Federal Regulations, 2010 CFR

2010-07-01

... whether: (1) The information requested is essential for processing the license application; and (2) The... or other interested party requests additional information? 148.108 Section 148.108 Navigation and... requests additional information? (a) Any Federal or State agency or other interested person may recommend...

26 CFR 1.852-7 - Additional information required in returns of shareholders.

Code of Federal Regulations, 2014 CFR

2014-04-01

... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.852-7 Additional information required in returns of shareholders. Any person who fails or refuses to comply with the demand of a regulated investment company for the written statements...

26 CFR 1.852-7 - Additional information required in returns of shareholders.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.852-7 Additional information required in returns of shareholders. Any person who fails or refuses to comply with the demand of a regulated investment company for the written statements...

26 CFR 1.852-7 - Additional information required in returns of shareholders.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.852-7 Additional information required in returns of shareholders. Any person who fails or refuses to comply with the demand of a regulated investment company for the written statements...

26 CFR 1.852-7 - Additional information required in returns of shareholders.

Code of Federal Regulations, 2013 CFR

2013-04-01

... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.852-7 Additional information required in returns of shareholders. Any person who fails or refuses to comply with the demand of a regulated investment company for the written statements...

16 CFR § 1102.24 - Designation of confidential information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... SAFETY ACT REGULATIONS PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Procedural... allegedly confidential information is not placed in the database, a request for designation of confidential... publication in the Database until it makes a determination regarding confidential treatment. (e) Assistance...

21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... § 20.61 of this chapter. (3) Adverse reaction reports, product experience reports, consumer complaints... or action on a particular lot of a certifiable color additive. (b) The following data and information...

Design, Development and Hotfire Testing of Monolithic Copper and Bimetallic Additively Manufactured Combustion Chambers

NASA Technical Reports Server (NTRS)

Gradl, Paul; Barnett, Greg; Brandsmeier, Will; Greene, Sandy Elam; Protz, Chris

2016-01-01

NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM) otherwise commonly referred to as additive manufacturing. The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for the GRCop-84 copper-alloy commensurate with powder bed additive manufacturing, evaluate bimetallic deposition and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. As a direct spin off of this program, NASA is working with industry partners to further develop the printing process for the GRCop-84 material in addition to the C-18150 (CuCrZr) material. To advance the process further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic additively manufactured chambers. A 1.2k sized thrust-chamber was designed and developed to compare the printing process of the GRCop-84 and C-18150 SLM materials. A series of similar MCC liners also completed development with an Inconel 625 jacket bonded to the GRcop-84 liner evaluating direct metal deposition (DMD) laser and arc-based techniques. This paper describes the design, development, manufacturing and testing of these combustion chambers and associated lessons learned throughout the design and development process.

PD-atricians: Leveraging Physicians and Participatory Design to Develop Novel Clinical Information Tools

PubMed Central

Pollack, Ari H; Miller, Andrew; Mishra, Sonali R.; Pratt, Wanda

2016-01-01

Participatory design, a method by which system users and stakeholders meaningfully contribute to the development of a new process or technology, has great potential to revolutionize healthcare technology, yet has seen limited adoption. We conducted a design session with eleven physicians working to create a novel clinical information tool utilizing participatory design methods. During the two-hour session, the physicians quickly engaged in the process and generated a large quantity of information, informing the design of a future tool. By utilizing facilitators experienced in design methodology, with detailed domain expertise, and well integrated into the healthcare organization, the participatory design session engaged a group of users who are often disenfranchised with existing processes as well as health information technology in general. We provide insight into why participatory design works with clinicians and provide guiding principles for how to implement these methods in healthcare organizations interested in advancing health information technology. PMID:28269900

A flight test facility design for examining digital information transfer

NASA Technical Reports Server (NTRS)

Knox, Charles E.

1990-01-01

Information is given in viewgraph form on a flight test facility design for examining digital information transfer. Information is given on aircraft/ground exchange, data link research activities, data link display format, a data link flight test, and the flight test setup.

Ergonomic design in the operating room: information technologies

NASA Astrophysics Data System (ADS)

Morita, Mark M.; Ratib, Osman

2005-04-01

The ergonomic design in the Surgical OR of information technology systems has been and continues to be a large problem. Numerous disparate information systems with unique hardware and display configurations create an environment similar to the chaotic environments of air traffic control. Patient information systems tend to show all available statistics making it difficult to isolate the key, relevant vitals for the patient. Interactions in this sterile environment are still being done with the traditional keyboard and mouse designed for cubicle office workflows. This presentation will address the shortcomings of the current design paradigm in the Surgical OR that relate to Information Technology systems. It will offer a perspective that addresses the ergonomic deficiencies and predicts how future technological innovations will integrate into this vision. Part of this vision includes a Surgical OR PACS prototype, developed by GE Healthcare Technologies, that addresses ergonomic challenges of PACS in the OR that include lack of portability, sterile field integrity, and UI targeted for diagnostic radiologists. GWindows (gesture control) developed by Microsoft Research and Voice command will allow for the surgeons to navigate and review diagnostic imagery without using the conventional keyboard and mouse that disrupt the integrity of the sterile field. This prototype also demonstrates how a wireless, battery powered, self contained mobile PACS workstation can be optimally positioned for a surgeon to reference images during an intervention as opposed to the current pre-operative review. Lessons learned from the creation of the Surgical OR PACS Prototype have demonstrated that PACS alone is not the end all solution in the OR. Integration of other disparate information systems and presentation of this information in simple, easy to navigate information packets will enable smoother interactions for the surgeons and other healthcare professionals in the OR. More intuitive

Additional Support for the Information Systems Analyst Exam as a Valid Program Assessment Tool

ERIC Educational Resources Information Center

Carpenter, Donald A.; Snyder, Johnny; Slauson, Gayla Jo; Bridge, Morgan K.

2011-01-01

This paper presents a statistical analysis to support the notion that the Information Systems Analyst (ISA) exam can be used as a program assessment tool in addition to measuring student performance. It compares ISA exam scores earned by students in one particular Computer Information Systems program with scores earned by the same students on the…

D-optimal experimental designs to test for departure from additivity in a fixed-ratio mixture ray.

PubMed

Coffey, Todd; Gennings, Chris; Simmons, Jane Ellen; Herr, David W

2005-12-01

Traditional factorial designs for evaluating interactions among chemicals in a mixture may be prohibitive when the number of chemicals is large. Using a mixture of chemicals with a fixed ratio (mixture ray) results in an economical design that allows estimation of additivity or nonadditive interaction for a mixture of interest. This methodology is extended easily to a mixture with a large number of chemicals. Optimal experimental conditions can be chosen that result in increased power to detect departures from additivity. Although these designs are used widely for linear models, optimal designs for nonlinear threshold models are less well known. In the present work, the use of D-optimal designs is demonstrated for nonlinear threshold models applied to a fixed-ratio mixture ray. For a fixed sample size, this design criterion selects the experimental doses and number of subjects per dose level that result in minimum variance of the model parameters and thus increased power to detect departures from additivity. An optimal design is illustrated for a 2:1 ratio (chlorpyrifos:carbaryl) mixture experiment. For this example, and in general, the optimal designs for the nonlinear threshold model depend on prior specification of the slope and dose threshold parameters. Use of a D-optimal criterion produces experimental designs with increased power, whereas standard nonoptimal designs with equally spaced dose groups may result in low power if the active range or threshold is missed.

A knowledge-based system design/information tool for aircraft flight control systems

NASA Technical Reports Server (NTRS)

Mackall, Dale A.; Allen, James G.

1991-01-01

Research aircraft have become increasingly dependent on advanced electronic control systems to accomplish program goals. These aircraft are integrating multiple disciplines to improve performance and satisfy research objective. This integration is being accomplished through electronic control systems. Systems design methods and information management have become essential to program success. The primary objective of the system design/information tool for aircraft flight control is to help transfer flight control system design knowledge to the flight test community. By providing all of the design information and covering multiple disciplines in a structured, graphical manner, flight control systems can more easily be understood by the test engineers. This will provide the engineers with the information needed to thoroughly ground test the system and thereby reduce the likelihood of serious design errors surfacing in flight. The secondary object is to apply structured design techniques to all of the design domains. By using the techniques in the top level system design down through the detailed hardware and software designs, it is hoped that fewer design anomalies will result. The flight test experiences are reviewed of three highly complex, integrated aircraft programs: the X-29 forward swept wing; the advanced fighter technology integration (AFTI) F-16; and the highly maneuverable aircraft technology (HiMAT) program. Significant operating technologies, and the design errors which cause them, is examined to help identify what functions a system design/informatin tool should provide to assist designers in avoiding errors.

78 FR 77119 - Proposed Information Collection Request; Comment Request; Regulation of Fuels and Fuel Additives...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-20

... Collection Request; Comment Request; Regulation of Fuels and Fuel Additives: 2011 Renewable Fuel Standards... collection request (ICR), ``Regulation of Fuels and Fuel Additives: 2011 Renewable Fuel Standards--Petition... whose disclosure is restricted by statute. FOR FURTHER INFORMATION CONTACT: Geanetta Heard, Fuels...

Principles and Concepts for Information and Communication Technology Design.

ERIC Educational Resources Information Center

Adams, Ray; Langdon, Patrick

2003-01-01

This article presents a theory for evaluating information and communication technology design for individuals with disabilities. Simplex 1 evaluates designs in five zones: sensory and input zone; output zone; abstract working memory; long-term memory; and central executive functioning. Simplex 2 evaluates feedback, emotional responses, cognitive…

47 CFR 25.111 - Additional information.

Code of Federal Regulations, 2010 CFR

2010-10-01

... information it requires for the Advance Publication, Coordination and Notification of frequency assignments... information required by the ITU Radiocommunication Bureau to advance publish, coordinate and notify the frequencies to be used for tracking, telemetry and control functions of DBS systems. [56 FR 24016, May 28...

A Strategic Approach to Curriculum Design for Information Literacy in Teacher Education--Implementing an Information Literacy Conceptual Framework

ERIC Educational Resources Information Center

Klebansky, Anna; Fraser, Sharon P.

2013-01-01

This paper details a conceptual framework that situates curriculum design for information literacy and lifelong learning, through a cohesive developmental information literacy based model for learning, at the core of teacher education courses at UTAS. The implementation of the framework facilitates curriculum design that systematically,…

Embracing additive manufacture: implications for foot and ankle orthosis design

PubMed Central

2012-01-01

Background The design of foot and ankle orthoses is currently limited by the methods used to fabricate the devices, particularly in terms of geometric freedom and potential to include innovative new features. Additive manufacturing (AM) technologies, where objects are constructed via a series of sub-millimetre layers of a substrate material, may present the opportunity to overcome these limitations and allow novel devices to be produced that are highly personalised for the individual, both in terms of fit and functionality. Two novel devices, a foot orthosis (FO) designed to include adjustable elements to relieve pressure at the metatarsal heads, and an ankle foot orthosis (AFO) designed to have adjustable stiffness levels in the sagittal plane, were developed and fabricated using AM. The devices were then tested on a healthy participant to determine if the intended biomechanical modes of action were achieved. Results The adjustable, pressure relieving FO was found to be able to significantly reduce pressure under the targeted metatarsal heads. The AFO was shown to have distinct effects on ankle kinematics which could be varied by adjusting the stiffness level of the device. Conclusions The results presented here demonstrate the potential design freedom made available by AM, and suggest that it may allow novel personalised orthotic devices to be produced which are beyond the current state of the art. PMID:22642941

Motivating the Notion of Generic Design within Information Processing Theory: The Design Problem Space.

ERIC Educational Resources Information Center

Goel, Vinod; Pirolli, Peter

The notion of generic design, while it has been around for 25 years, is not often articulated, especially within Newell and Simon's (1972) Information Processing Theory framework. Design is merely lumped in with other forms of problem solving activity. Intuitively it is felt that there should be a level of description of the phenomenon which…

Test Information Targeting Strategies for Adaptive Multistage Testing Designs.

ERIC Educational Resources Information Center

Luecht, Richard M.; Burgin, William

Adaptive multistage testlet (MST) designs appear to be gaining popularity for many large-scale computer-based testing programs. These adaptive MST designs use a modularized configuration of preconstructed testlets and embedded score-routing schemes to prepackage different forms of an adaptive test. The conditional information targeting (CIT)…

The Skills Framework for the Information Age: Engaging Stakeholders in Curriculum Design

ERIC Educational Resources Information Center

von Konsky, Brian R.; Miller, Charlynn; Jones, Asheley

2016-01-01

This paper reports on a research project, examining the role of the Skills Framework for the Information Age (SFIA) in Information and Communications Technology (ICT) curriculum design and management. A goal was to investigate how SFIA informs a top-down approach to curriculum design, beginning with a set of skills that define a particular career…

Design of information systems for population data collection based on client-server at Bagolo village

NASA Astrophysics Data System (ADS)

Nugraha, Ucu

2017-06-01

Village is the level under the sub-district level in the governmental system in a region where the information system of population data service is majority provided in a manual system. However, such systems frequently lead to invalid data in addition to the available data that does not correspond to the facts as the impact of frequent errors in the process of data collection related to population including the data of the elderly and the process of data transfer. Similarly, the data correspondences such as death certificate, birth certificate, a certificate of domicile change, and so forth, have their own problems. Data archives are frequently non-systematic because they are not organized properly or not stored in a database. Nevertheless, information service system for population census at this level can assist government agencies, especially in the management of population census at the village level. A designed system can make the process of a population census easier. It is initiated by the submission of population letter by each citizen who comes to the village administrative office. Population census information system based on client-server at Bagolo Village was designed in effective and non-complicated workflow and interface design. By using the client-server as the basis, the data will be stored centrally on the server, so it can reduce data duplication and data loss. Therefore, when the local governments require data information related to the population data of a village, they can obtain it easily without the need to collect the data directly at the respective village.

Space law information system design, phase 2

NASA Technical Reports Server (NTRS)

Morenoff, J.; Roth, D. L.; Singleton, J. W.

1973-01-01

Design alternatives were defined for the implementation of a Space Law Information System for the Office of the General Counsel, NASA. A thesaurus of space law terms was developed and a selected document sample indexed on the basis of that thesaurus. Abstracts were also prepared for the sample document set.

Design Considerations of Help Options in Computer-Based L2 Listening Materials Informed by Participatory Design

ERIC Educational Resources Information Center

Cárdenas-Claros, Mónica Stella

2015-01-01

This paper reports on the findings of two qualitative exploratory studies that sought to investigate design features of help options in computer-based L2 listening materials. Informed by principles of participatory design, language learners, software designers, language teachers, and a computer programmer worked collaboratively in a series of…

Using an Architectural Metaphor for Information Design in Hypertext.

ERIC Educational Resources Information Center

Deboard, Donn R.; Lee, Doris

2001-01-01

Uses Frank Lloyd Wright's (1867-1959) organic architecture as a metaphor to define the relationship between a part and a whole, whether the focus is on a building and its surroundings or information delivered via hypertext. Reviews effective strategies for designing text information via hypertext and incorporates three levels of information…

A Novel Multiscale Design of Interfaces for Polymeric Composites and Bonded Joints using Additive Manufacturing

DTIC Science & Technology

2016-09-13

AFRL-AFOSR-VA-TR-2016-0317 A Novel Multiscale Design of Interfaces for Polymeric Composites and Bonded Joints using Additive Manufacturing Pavana...Composites and Bonded Joints using Additive Manufacturing AWARD NO.: FA9550-15-1-0216 AGENCY NAME: The Air Force Office of Scientific Research (AFOSR), Ar...20 3 Additive Manufacturing for Bonded Composite Joints 21 3.1 Introduction

Developing design methods of concrete mix with microsilica additives for road construction

NASA Astrophysics Data System (ADS)

Dmitrienko, Vladimir; Shrivel, Igor; Kokunko, Irina; Pashkova, Olga

2017-10-01

Based on the laboratory test results, regression equations having standard cone and concrete strength, to determine the available amount of cement, water and microsilica were obtained. The joint solution of these equations allowed the researchers to develop the algorithm of designing heavy concrete compositions with microsilica additives for road construction.

Design Optimization of Irregular Cellular Structure for Additive Manufacturing

NASA Astrophysics Data System (ADS)

Song, Guo-Hua; Jing, Shi-Kai; Zhao, Fang-Lei; Wang, Ye-Dong; Xing, Hao; Zhou, Jing-Tao

2017-09-01

Irregularcellular structurehas great potential to be considered in light-weight design field. However, the research on optimizing irregular cellular structures has not yet been reporteddue to the difficulties in their modeling technology. Based on the variable density topology optimization theory, an efficient method for optimizing the topology of irregular cellular structures fabricated through additive manufacturing processes is proposed. The proposed method utilizes tangent circles to automatically generate the main outline of irregular cellular structure. The topological layoutof each cellstructure is optimized using the relative density informationobtained from the proposed modified SIMP method. A mapping relationship between cell structure and relative densityelement is builtto determine the diameter of each cell structure. The results show that the irregular cellular structure can be optimized with the proposed method. The results of simulation and experimental test are similar for irregular cellular structure, which indicate that the maximum deformation value obtained using the modified Solid Isotropic Microstructures with Penalization (SIMP) approach is lower 5.4×10-5 mm than that using the SIMP approach under the same under the same external load. The proposed research provides the instruction to design the other irregular cellular structure.

Contextualizing Secure Information System Design: A Socio-Technical Approach

ERIC Educational Resources Information Center

Charif, Abdul Rahim

2017-01-01

Secure Information Systems (SIS) design paradigms have evolved in generations to adapt to IS security needs. However, modern IS are still vulnerable and are far from secure. The development of an underlying IS cannot be reduced to "technological fixes" neither is the design of SIS. Technical security cannot ensure IS security.…

Architectural Design for the Global Legal Information Network

NASA Technical Reports Server (NTRS)

Kalpakis, Konstantinos

1999-01-01

In this report, we provide a summary of our activities regarding the goals, requirements analysis, design, and prototype implementation for the Global Legal Information Network, a joint effort between the Law Library of Congress and NASA.

Urban Planning and Management Information Systems Analysis and Design Based on GIS

NASA Astrophysics Data System (ADS)

Xin, Wang

Based on the analysis of existing relevant systems on the basis of inadequate, after a detailed investigation and research, urban planning and management information system will be designed for three-tier structure system, under the LAN using C/S mode architecture. Related functions for the system designed in accordance with the requirements of the architecture design of the functional relationships between the modules. Analysis of the relevant interface and design, data storage solutions proposed. The design for small and medium urban planning information system provides a viable building program.

Icon and user interface design for emergency medical information systems: a case study.

PubMed

Salman, Y Batu; Cheng, Hong-In; Patterson, Patrick E

2012-01-01

A usable medical information system should allow for reliable and accurate interaction between users and the system in emergencies. A participatory design approach was used to develop a medical information system in two Turkish hospitals. The process consisted of task and user analysis, an icon design survey, initial icon design, final icon design and evaluation, and installation of the iconic medical information system with the icons. We observed work sites to note working processes and tasks related to the information system and interviewed medical personnel. Emergency personnel then participated in the design process to develop a usable graphical user interface, by drawing icon sketches for 23 selected tasks. Similar sketches were requested for specific tasks such as family medical history, contact information, translation, addiction, required inspections, requests and applications, and nurse observations. The sketches were analyzed and redesigned into computer icons by professional designers and the research team. A second group of physicians and nurses then tested the understandability of the icons. The user interface layout was examined and evaluated by system users, followed by the system's installation. Medical personnel reported the participatory design process was interesting and believed the resulting designs would be more familiar and friendlier. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Design Research of TIANDITU (Map Worl)-Based Geographic Information System for Travelling Service

NASA Astrophysics Data System (ADS)

Zhang, J.; Zhang, H.; Wang, C.

2014-04-01

TIANDITU (Map World) is the public version of the National Platform for Common Geospatial Information Service, and the travelling channel is TIANDITU-based geographic information platform for travelling service. With the development of tourism, traditional ways for providing travelling information cannot meet the needs of travelers. As such, the travelling channel of TIANDITU focuses on providing travel information abundantly and precisely, which integrated the geographic information data of TIANDITU Version 2.0 and the authoritative information resources from China National Tourism Administration. Furthermore, spatial positioning, category and information query of various travelling information were offered for the public in the travelling channel. This research mainly involves three important parts: the system design, key technologies of the system design and application examples. Firstly, this paper introduced the design of TIANDITU-based geographic information system for travelling service, and the general and database design were described in detail. The designs for general, database and travelling service above should consider lots of factors which illustrated in the paper in order to guarantee the efficient service. The process of system construction, the content of geographic information for travelling and system functions of geographic information for travelling are also proposed via diagram in this part. Then several key technologies were discussed, including the travelling information integration for main node and among nodes, general architecture design and management system for travelling channel, web portals and system interface. From the perspective of main technologies, this part describes how TIANDITU travelling channel can realize various functions and reach the requirements from different users. Finally, three application examples about travelling information query were listed shortly. The functions and search results are shown clearly in this

The application of use case modeling in designing medical imaging information systems.

PubMed

Safdari, Reza; Farzi, Jebraeil; Ghazisaeidi, Marjan; Mirzaee, Mahboobeh; Goodini, Azadeh

2013-01-01

Introduction. The essay at hand is aimed at examining the application of use case modeling in analyzing and designing information systems to support Medical Imaging services. Methods. The application of use case modeling in analyzing and designing health information systems was examined using electronic databases (Pubmed, Google scholar) resources and the characteristics of the modeling system and its effect on the development and design of the health information systems were analyzed. Results. Analyzing the subject indicated that Provident modeling of health information systems should provide for quick access to many health data resources in a way that patients' data can be used in order to expand distant services and comprehensive Medical Imaging advices. Also these experiences show that progress in the infrastructure development stages through gradual and repeated evolution process of user requirements is stronger and this can lead to a decline in the cycle of requirements engineering process in the design of Medical Imaging information systems. Conclusion. Use case modeling approach can be effective in directing the problems of health and Medical Imaging information systems towards understanding, focusing on the start and analysis, better planning, repetition, and control.

Using additional information on working hours to predict coronary heart disease: a cohort study

PubMed Central

Kivimäki, Mika; Batty, G. David; Hamer, Mark; Ferrie, Jane E.; Vahtera, Jussi; Virtanen, Marianna; Marmot, Michael G.; Singh-Manoux, Archana; Shipley, Martin J.

2011-01-01

Background Long hours are associated with increased risk of coronary heart disease. Adding information on long hours to traditional risk factors could potentially help improve risk prediction. Objective To examine whether information on long working hours improves the ability of the Framingham risk model to predict coronary heart disease in a low-risk employed population. Design Prospective cohort study; baseline medical examination (1991-1993) and coronary heart disease follow-up to 2004. Settings Civil service departments in London (the Whitehall II study). Participants 7095 adults (2109 women) aged 39 to 62, working full time, and free of coronary heart disease at baseline. Measurements Working hours and the Framingham risk score were measured at baseline. Coronary death and non-fatal myocardial infarction were ascertained from three sources: medical screenings every 5 years, hospital data and register linkage. Results 192 persons had incident coronary heart disease during a median 12.3 year follow-up. After adjustment for the Framingham score, participants working ≥11 hours per day had a 1.67-fold (95% CI: 1.10-2.55) increased risk of coronary heart disease relative to those working 7-8 hours. The addition of working hours to the Framingham score led to a net reclassification improvement of 4.7% (p=0.034), resulting from a better identification of individuals who later developed coronary heart disease (sensitivity gain). Limitations The findings may not be generalizable to populations with a larger proportion of high-risk individuals. Furthermore, the predictive utility of working hours was not validated in an independent cohort. Conclusion Information on working hours may improve prediction of coronary heart disease risk based on the Framingham risk score in low-risk working populations. Primary Funding Source Medical Research Council, British Heart Foundation, BUPA Foundation, UK; National Heart, Lung and Blood Institute and National Institute on Aging, NIH

Design and Establishment of Quality Model of Fundamental Geographic Information Database

NASA Astrophysics Data System (ADS)

Ma, W.; Zhang, J.; Zhao, Y.; Zhang, P.; Dang, Y.; Zhao, T.

2018-04-01

In order to make the quality evaluation for the Fundamental Geographic Information Databases(FGIDB) more comprehensive, objective and accurate, this paper studies and establishes a quality model of FGIDB, which formed by the standardization of database construction and quality control, the conformity of data set quality and the functionality of database management system, and also designs the overall principles, contents and methods of the quality evaluation for FGIDB, providing the basis and reference for carry out quality control and quality evaluation for FGIDB. This paper designs the quality elements, evaluation items and properties of the Fundamental Geographic Information Database gradually based on the quality model framework. Connected organically, these quality elements and evaluation items constitute the quality model of the Fundamental Geographic Information Database. This model is the foundation for the quality demand stipulation and quality evaluation of the Fundamental Geographic Information Database, and is of great significance on the quality assurance in the design and development stage, the demand formulation in the testing evaluation stage, and the standard system construction for quality evaluation technology of the Fundamental Geographic Information Database.

Design principles for achieving integrated healthcare information systems.

PubMed

Jensen, Tina Blegind

2013-03-01

Achieving integrated healthcare information systems has become a common goal for many countries in their pursuit of obtaining coordinated and comprehensive healthcare services. This article focuses on how a small local project termed 'Standardized pull of patient data' expanded and is now used on a large scale providing a majority of hospitals, general practitioners and citizens across Denmark with the possibility of accessing healthcare data from different electronic patient record systems and other systems. I build on design theory for information infrastructures, as presented by Hanseth and Lyytinen, to examine the design principles that facilitated this smallscale project to expand and become widespread. As a result of my findings, I outline three lessons learned that emphasize: (i) principles of flexibility, (ii) expansion from the installed base through modular strategies and (iii) identification of key healthcare actors to provide them with immediate benefits.

Information model design health service childhood cancer for parents and caregivers

NASA Astrophysics Data System (ADS)

Ramli, Syazwani; Muda, Zurina

2015-05-01

Most Malaysians do not realize that they are suffer from a chronic disease until the disease is confirmed to be at a critical stage. This is because lack of awareness among Malaysians about a chronic disease especially in a childhood cancer. Based on report of the National Cancer Council (MAKNA),11 million adults and children suffered with cancer and 6 million of them die in a worldwide. Lack of public exposure to this disease leads to health problems to their children. Information model design health service childhood cancer for p arents and caregivers using an android application medium can be used by a doctor to deliver an information of cancer to the parents and caregivers. The development of this information model design health service childhood cancer for parents and caregivers are using an integration of health promotion theory, spiral model and lean model to form a new model that can be used as a model design content of health service. The method using in this study are by an interview technique and questionnaires along the study was conducted. Hopefully the production of this information model design health service childhood cancer for parents and caregivers using an android apps as a medium can help parents, caregivers and public to know more about information of childhood cancer and at the same time can gain an awareness among them and this app also can be used as a medium for doctors to deliver an information to the parents and caregivers.

From path models to commands during additive printing of large-scale architectural designs

NASA Astrophysics Data System (ADS)

Chepchurov, M. S.; Zhukov, E. M.; Yakovlev, E. A.; Matveykin, V. G.

2018-05-01

The article considers the problem of automation of the formation of large complex parts, products and structures, especially for unique or small-batch objects produced by a method of additive technology [1]. Results of scientific research in search for the optimal design of a robotic complex, its modes of operation (work), structure of its control helped to impose the technical requirements on the technological process for manufacturing and design installation of the robotic complex. Research on virtual models of the robotic complexes allowed defining the main directions of design improvements and the main goal (purpose) of testing of the the manufactured prototype: checking the positioning accuracy of the working part.

Design of the Hospital Integrated Information Management System Based on Cloud Platform

PubMed Central

Aijing, L; Jin, Y

2015-01-01

ABSTRACT At present, the outdated information management style cannot meet the needs of hospital management, and has become the bottleneck of hospital's management and development. In order to improve the integrated management of information, hospitals have increased their investment in integrated information management systems. On account of the lack of reasonable and scientific design, some hospital integrated information management systems have common problems, such as unfriendly interface, poor portability and maintainability, low security and efficiency, lack of interactivity and information sharing. To solve the problem, this paper carries out the research and design of a hospital information management system based on cloud platform, which can realize the optimized integration of hospital information resources and save money. PMID:27399033

Design of the Hospital Integrated Information Management System Based on Cloud Platform.

PubMed

Aijing, L; Jin, Y

2015-12-01

At present, the outdated information management style cannot meet the needs of hospital management, and has become the bottleneck of hospital's management and development. In order to improve the integrated management of information, hospitals have increased their investment in integrated information management systems. On account of the lack of reasonable and scientific design, some hospital integrated information management systems have common problems, such as unfriendly interface, poor portability and maintainability, low security and efficiency, lack of interactivity and information sharing. To solve the problem, this paper carries out the research and design of a hospital information management system based on cloud platform, which can realize the optimized integration of hospital information resources and save money.

Multi-Modal Traveler Information System - Gateway Design Options

DOT National Transportation Integrated Search

1997-05-19

The purpose of this working paper is to provide insight into the options that are available from which to design the Gateway Traveler Information System (TIS). This working paper will discuss each option in a general manner without becoming overly te...

Project HealthDesign: enhancing action through information.

PubMed

Brennan, Patricia Flatley; Casper, Gail; Downs, Stephen; Aulahk, Veenu

2009-01-01

Project HealthDesign is a country-wide initiative in the United States designed to stimulate innovation in personal health records (PHRs). Nine grantee teams engaged in an 18-month long design and prototyping process. Two teams addressed the needs of children and adolescents; three created novel approaches to help adults prevent or manage metabolic syndrome; three groups employed interface innovations to assist patients with chronic care management and one team devised a novel calendaring system to assist patients undergoing complex medical/surgical treatments to integrate care processes into their daily lives. These projects not only included development and testing of novel personal health records applications, but also served as the starting point to specify and implement a common technical core platform. The project advanced PHR development in two key ways: intensive user-centered design and a development architecture that separates applications of PHRs from the infrastructure that supports them. The initiative also allowed systematic investigation of significant ethical, legal and social issues, including how privacy considerations are changed when information technology innovations are used in the home and the rebalancing of the authority structure of health care decision making when patient-centered approaches guide the design of PHRs.

Designing the Information Literacy Competency Standards for nursing.

PubMed

Phelps, Sue F

2013-01-01

This column documents the rationale for creating information literacy competency standards for nursing based on the Association of College and Research Libraries (ACRL) "Information Literacy Competency Standards for Higher Education" and the three documents from the American Association of Colleges of Nursing (AACN) on essential skills for nurses in baccalaureate, masters, and doctoral level education and practice. It chronicles the process of the task force which is designing the discipline specific skills and predicts the value of their use, once they are published.

18 CFR 33.4 - Additional information requirements for applications involving vertical competitive impacts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional information requirements for applications involving vertical competitive impacts. 33.4 Section 33.4 Conservation of Power... electricity products (i.e., downstream relevant products) in the same geographic markets or that the extent of...

Using a 'value-added' approach for contextual design of geographic information.

PubMed

May, Andrew J

2013-11-01

The aim of this article is to demonstrate how a 'value-added' approach can be used for user-centred design of geographic information. An information science perspective was used, with value being the difference in outcomes arising from alternative information sets. Sixteen drivers navigated a complex, unfamiliar urban route, using visual and verbal instructions representing the distance-to-turn and junction layout information presented by typical satellite navigation systems. Data measuring driving errors, navigation errors and driver confidence were collected throughout the trial. The results show how driver performance varied considerably according to the geographic context at specific locations, and that there are specific opportunities to add value with enhanced geographical information. The conclusions are that a value-added approach facilitates a more explicit focus on 'desired' (and feasible) levels of end user performance with different information sets, and is a potentially effective approach to user-centred design of geographic information. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Modelling Situation Awareness Information for Naval Decision Support Design

DTIC Science & Technology

2003-10-01

Modelling Situation Awareness Information for Naval Decision Support Design Dr.-Ing. Bernhard Doering, Dipl.-Ing. Gert Doerfel, Dipl.-Ing... knowledge -based user interfaces. For developing such interfaces information of the three different SA levels which operators need in performing their...large scale on situation awareness of operators which is defined as the state of operator knowledge about the external environment resulting from

Just-in-time Design and Additive Manufacture of Patient-specific Medical Implants

NASA Astrophysics Data System (ADS)

Shidid, Darpan; Leary, Martin; Choong, Peter; Brandt, Milan

Recent advances in medical imaging and manufacturing science have enabled the design and production of complex, patient-specific orthopaedic implants. Additive Manufacture (AM) generates three-dimensional structures layer by layer, and is not subject to the constraints associated with traditional manufacturing methods. AM provides significant opportunities for the design of novel geometries and complex lattice structures with enhanced functional performance. However, the design and manufacture of patient-specific AM implant structures requires unique expertise in handling various optimization platforms. Furthermore, the design process for complex structures is computationally intensive. The primary aim of this research is to enable the just-in-time customisation of AM prosthesis; whereby AM implant design and manufacture be completed within the time constraints of a single surgical procedure, while minimising prosthesis mass and optimising the lattice structure to match the stiffness of the surrounding bone tissue. In this research, a design approach using raw CT scan data is applied to the AM manufacture of femoral prosthesis. Using the proposed just-in-time concept, the mass of the prosthesis was rapidly designed and manufactured while satisfying the associated structural requirements. Compressive testing of lattice structures manufactured using proposed method shows that the load carrying capacity of the resected composite bone can be recovered by up to 85% and the compressive stiffness of the AM prosthesis is statistically indistinguishable from the stiffness of the initial bone.

76 FR 3907 - Designation of a Class of Employees for Addition to the Special Exposure Cohort

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-21

... addition to the SEC: All Atomic Weapons Employer employees who worked at Texas City Chemicals, Inc., from... designate a class of employees from Texas City Chemicals, Inc., Texas City, Texas, as an addition to the...

78 FR 22937 - 60-Day Notice of Proposed Information Collection: Application for Additional Visa Pages or...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

...: Application for Additional Visa Pages or Miscellaneous Passport Services ACTION: Notice of request for public... Information Collection: Application for Additional Visa Pages or Miscellaneous Passport Services. OMB Control...: Bureau of Consular Affairs, Passport Services, Office of Program Management and Operational Support...

From Data Poor, Information Poor to Data Rich, Information Rich Decision-Making: Design and Implementation of a Student Information System

ERIC Educational Resources Information Center

Burger, John M.; Nadirova, Anna

2013-01-01

In this paper, we report on the design and implementation of a state of the art Student Information System (SIS) being developed in a moderate size Alberta, Canada school jurisdiction. The SIS design is premised upon transparency, balanced, comprehensive, and multi-method assessments that links qualitative and quantitative data in support of…

Research-Informed Principles for (Re)Designing Teaching and Learning Spaces

ERIC Educational Resources Information Center

Finkelstein, Adam; Ferris, Jennie; Weston, Cynthia; Winer, Laura

2016-01-01

Designing physical learning environments that connect to indicators of effective educational practice reflects a university's pedagogical commitment to student success. This article describes an approach to teaching and learning space design based on research-informed pedagogical principles successfully implemented at our university. It then…

Design considerations for a comprehensive regional energy information system. Working paper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naumann, J.D.; Knobloch, P.C.; Chervany, N.L.

1974-07-01

The Regional Energy Information System concerns itself with decision making on sub-state, state, and regional levels in emergencies, for tactical decisions, and long-range strategic policies by both government and industry. Effective access to energy information is critical, and REIS is designed to provide a standardized data base with design goals, constraints, parameters, and schedules. The REIS system is being developed now; many states, the FEA and other agencies are likewise developing energy information systems. Shareability of data must be sought, and both technical and procedural requirements for this are discussed and a plan for action is presented. (GRA)

Design Considerations for Creating a Chemical Information Workstation.

ERIC Educational Resources Information Center

Mess, John A.

1995-01-01

Discusses what a functional chemical information workstation should provide to support the users in an academic library and examines how it can be implemented. Highlights include basic design considerations; natural language interface, including grammar-based, context-based, and statistical methodologies; expert system interface; and programming…

Structural Mass Saving Potential of a 5-MW Direct-Drive Generator Designed for Additive Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sethuraman, Latha; Fingersh, Lee J; Dykes, Katherine L

As wind turbine blade diameters and tower height increase to capture more energy in the wind, higher structural loads results in more structural support material increasing the cost of scaling. Weight reductions in the generator transfer to overall cost savings of the system. Additive manufacturing facilitates a design-for-functionality approach, thereby removing traditional manufacturing constraints and labor costs. The most feasible additive manufacturing technology identified for large, direct-drive generators in this study is powder-binder jetting of a sand cast mold. A parametric finite element analysis optimization study is performed, optimizing for mass and deformation. Also, topology optimization is employed for eachmore » parameter-optimized design.The optimized U-beam spoked web design results in a 24 percent reduction in structural mass of the rotor and 60 percent reduction in radial deflection.« less

13 CFR 108.1940 - Procedures for designation of additional Low-Income Geographic Areas

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Procedures for designation of additional Low-Income Geographic Areas 108.1940 Section 108.1940 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Miscellaneous § 108.1940 Procedures...

7 CFR 868.262 - Grade designation and other certificate information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Brown Rice for Processing Principles Governing Application of Standards § 868.262 Grade designation and other certificate information. (a) Brown rice for processing. The grade designation for all classes of Brown rice for processing shall be included on the certificate grade-line in the following order: (1...

7 CFR 868.262 - Grade designation and other certificate information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Brown Rice for Processing Principles Governing Application of Standards § 868.262 Grade designation and other certificate information. (a) Brown rice for processing. The grade designation for all classes of Brown rice for processing shall be included on the certificate grade-line in the following order: (1...

7 CFR 868.262 - Grade designation and other certificate information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Brown Rice for Processing Principles Governing Application of Standards § 868.262 Grade designation and other certificate information. (a) Brown rice for processing. The grade designation for all classes of Brown rice for processing shall be included on the certificate grade-line in the following order: (1...

7 CFR 868.262 - Grade designation and other certificate information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Brown Rice for Processing Principles Governing Application of Standards § 868.262 Grade designation and other certificate information. (a) Brown rice for processing. The grade designation for all classes of Brown rice for processing shall be included on the certificate grade-line in the following order: (1...

7 CFR 868.262 - Grade designation and other certificate information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Brown Rice for Processing Principles Governing Application of Standards § 868.262 Grade designation and other certificate information. (a) Brown rice for processing. The grade designation for all classes of Brown rice for processing shall be included on the certificate grade-line in the following order: (1...

Quantifying the Information Habits of High School Students Engaged in Engineering Design

ERIC Educational Resources Information Center

Mentzer, Nathan; Fosmire, Michael J.

2015-01-01

This study measured the information gathering behaviors of high school students who had taken engineering design courses as they solved a design problem. The authors investigated what types of information students accessed, its quality, when it was accessed during the students' process, and if it impacted their thinking during the activity.…

Imaging system design for improved information capacity

NASA Technical Reports Server (NTRS)

Fales, C. L.; Huck, F. O.; Samms, R. W.

1984-01-01

Shannon's theory of information for communication channels is used to assess the performance of line-scan and sensor-array imaging systems and to optimize the design trade-offs involving sensitivity, spatial response, and sampling intervals. Formulations and computational evaluations account for spatial responses typical of line-scan and sensor-array mechanisms, lens diffraction and transmittance shading, defocus blur, and square and hexagonal sampling lattices.

30 CFR 250.418 - What additional information must I submit with my APD?

Code of Federal Regulations, 2010 CFR

2010-07-01

... INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must I submit with my APD? You must include the following with the APD: (a) Rated capacities of the drilling rig and major...

Information technology aided exploration of system design spaces

NASA Technical Reports Server (NTRS)

Feather, Martin S.; Kiper, James D.; Kalafat, Selcuk

2004-01-01

We report on a practical application of information technology techniques to aid system engineers effectively explore large design spaces. We make use of heuristic search, visualization and data mining, the combination of which we have implemented wtihin a risk management tool in use at JPL and NASA.

Design of an Orthopedic Product by Using Additive Manufacturing Technology: The Arm Splint.

PubMed

Blaya, Fernando; Pedro, Pilar San; Silva, Julia López; D'Amato, Roberto; Heras, Enrique Soriano; Juanes, Juan Antonio

2018-02-05

The traditional fabrication process of custom-made splints has hardly undergone any progress since the beginning of its use at the end of the eighteenth century. New manufacturing techniques and the new materials can help to modernize this treatment method of fractures. The use of Additive Manufacturing has been proposed in recent years as an alternative process for the manufacture of splints and there has been an increase in public awareness and exploration. For this reason, in this study a splint model printed in 3D, that replaces the deficiencies of the cast maintaining its virtues, has been proposed. The proposed methodology is based on three-dimensional digitalization techniques and 3D modeling with reverse engineering software. The work integrates different scientific disciplines to achieve its main goal: to improve life quality of the patient. In addition, the splint has been designed based on the principles of sustainable development. The design of splint is made of Polycarbonate by technique of Additive Manufacturing with fused deposition manufacturing, and conceived with organic shapes, customizing openings and closing buttons with rubber. In this preliminary study the final result is a prototype of the 3D printed arm splint in a reduced scale by using PLA as material.

Leveraging health information exchange to improve population health reporting processes: lessons in using a collaborative-participatory design process.

PubMed

Revere, Debra; Dixon, Brian E; Hills, Rebecca; Williams, Jennifer L; Grannis, Shaun J

2014-01-01

Surveillance, or the systematic monitoring of disease within a population, is a cornerstone function of public health. Despite significant investment in information technologies (IT) to improve the public's health, health care providers continue to rely on manual, spontaneous reporting processes that can result in incomplete and delayed surveillance activities. Participatory design principles advocate including real users and stakeholders when designing an information system to ensure high ecological validity of the product, incorporate relevance and context into the design, reduce misconceptions designers can make due to insufficient domain expertise, and ultimately reduce barriers to adoption of the system. This paper focuses on the collaborative and informal participatory design process used to develop enhanced, IT-enabled reporting processes that leverage available electronic health records in a health information exchange to prepopulate notifiable-conditions report forms used by public health authorities. Over nine months, public health stakeholders, technical staff, and informatics researchers were engaged in a multiphase participatory design process that included public health stakeholder focus groups, investigator-engineering team meetings, public health survey and census regarding high-priority data elements, and codesign of exploratory prototypes and final form mock-ups. A number of state-mandated report fields that are not highly used or desirable for disease investigation were eliminated, which allowed engineers to repurpose form space for desired and high-priority data elements and improve the usability of the forms. Our participatory design process ensured that IT development was driven by end user expertise and needs, resulting in significant improvements to the layout and functionality of the reporting forms. In addition to informing report form development, engaging with public health end users and stakeholders through the participatory design

Leveraging Health Information Exchange to Improve Population Health Reporting Processes: Lessons in Using a Collaborative-Participatory Design Process

PubMed Central

Revere, Debra; Dixon, Brian E.; Hills, Rebecca; Williams, Jennifer L.; Grannis, Shaun J.

2014-01-01

Introduction: Surveillance, or the systematic monitoring of disease within a population, is a cornerstone function of public health. Despite significant investment in information technologies (IT) to improve the public’s health, health care providers continue to rely on manual, spontaneous reporting processes that can result in incomplete and delayed surveillance activities. Background: Participatory design principles advocate including real users and stakeholders when designing an information system to ensure high ecological validity of the product, incorporate relevance and context into the design, reduce misconceptions designers can make due to insufficient domain expertise, and ultimately reduce barriers to adoption of the system. This paper focuses on the collaborative and informal participatory design process used to develop enhanced, IT-enabled reporting processes that leverage available electronic health records in a health information exchange to prepopulate notifiable-conditions report forms used by public health authorities. Methods: Over nine months, public health stakeholders, technical staff, and informatics researchers were engaged in a multiphase participatory design process that included public health stakeholder focus groups, investigator-engineering team meetings, public health survey and census regarding high-priority data elements, and codesign of exploratory prototypes and final form mock-ups. Findings: A number of state-mandated report fields that are not highly used or desirable for disease investigation were eliminated, which allowed engineers to repurpose form space for desired and high-priority data elements and improve the usability of the forms. Our participatory design process ensured that IT development was driven by end user expertise and needs, resulting in significant improvements to the layout and functionality of the reporting forms. Discussion: In addition to informing report form development, engaging with public health end

30 CFR 250.418 - What additional information must I submit with my APD?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must I submit with my APD? You must include the following with the APD: (a) Rated capacities of the drilling rig...

30 CFR 250.418 - What additional information must I submit with my APD?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must I submit with my APD? You must include the following with the APD: (a) Rated capacities of the drilling rig...

30 CFR 250.418 - What additional information must I submit with my APD?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must I submit with my APD? You must include the following with the APD: (a) Rated capacities of the drilling rig...

21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... established in § 20.61 of this chapter. (6) All records showing the Food and Drug Administration's testing of... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Confidentiality of data and information in color additive petitions. 71.15 Section 71.15 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH...

21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... established in § 20.61 of this chapter. (6) All records showing the Food and Drug Administration's testing of... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Confidentiality of data and information in color additive petitions. 71.15 Section 71.15 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH...

21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... established in § 20.61 of this chapter. (6) All records showing the Food and Drug Administration's testing of... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Confidentiality of data and information in color additive petitions. 71.15 Section 71.15 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH...

21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... established in § 20.61 of this chapter. (6) All records showing the Food and Drug Administration's testing of... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Confidentiality of data and information in color additive petitions. 71.15 Section 71.15 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH...

41 CFR 102-79.111 - Where may Executive agencies find additional information on Integrated Workplace concepts?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Where may Executive agencies find additional information on Integrated Workplace concepts? 102-79.111 Section 102-79.111 Public... Integrated Workplace concepts? The GSA Office of Governmentwide Policy provides additional guidance in its...

Information Sharing in the Field of Design Research

ERIC Educational Resources Information Center

Pilerot, Ola

2015-01-01

Introduction: This paper reports on an extensive research project which aimed at exploring information sharing activities in a scholarly context. The paper presents and synthesises findings from a literature review and three qualitative case studies. The empirical setting is a geographically distributed Nordic network of design scholars. Method:…

An Additive Definition of Molecular Complexity.

PubMed

Böttcher, Thomas

2016-03-28

A framework for molecular complexity is established that is based on information theory and consistent with chemical knowledge. The resulting complexity index Cm is derived from abstracting the information content of a molecule by the degrees of freedom in the microenvironments on a per-atom basis, allowing the molecular complexity to be calculated in a simple and additive way. This index allows the complexity of any molecule to be universally assessed and is sensitive to stereochemistry, heteroatoms, and symmetry. The performance of this complexity index is evaluated and compared against the current state of the art. Its additive character gives consistent values also for very large molecules and supports direct comparisons of chemical reactions. Finally, this approach may provide a useful tool for medicinal chemistry in drug design and lead selection, as demonstrated by correlating molecular complexities of antibiotics with compound-specific parameters.

Airborne Use of Traffic Intent Information in a Distributed Air-Ground Traffic Management Concept: Experiment Design and Preliminary Results

NASA Technical Reports Server (NTRS)

Wing, David J.; Adams, Richard J.; Duley, Jacqueline A.; Legan, Brian M.; Barmore, Bryan E.; Moses, Donald

2001-01-01

A predominant research focus in the free flight community has been on the type of information required on the flight deck to enable pilots to "autonomously" maintain separation from other aircraft. At issue are the relative utility and requirement for information exchange between aircraft regarding the current "state" and/or the "intent" of each aircraft. This paper presents the experimental design and some initial findings of an experimental research study designed to provide insight into the issue of intent information exchange in constrained en-route operations and its effect on pilot decision making and flight performance. Two operational modes for autonomous operations were compared in a piloted simulation. The tactical mode was characterized primarily by the use of state information for conflict detection and resolution and an open-loop means for the pilot to meet operational constraints. The strategic mode involved the combined use of state and intent information, provided the pilot an additional level of alerting, and allowed a closed-loop approach to meeting operational constraints. Potential operational benefits of both modes are illustrated through several scenario case studies. Subjective data results are presented that generally indicate pilot consensus in favor of the strategic mode.

Information Design: A New Approach to Teaching Technical Writing Service Courses

ERIC Educational Resources Information Center

McKee, Candie DeLane

2012-01-01

This study used a needs assessment, process analysis, process design, and textbook design to develop a new process and new textbook, based on Cargile-Cook's layered literacies, Quesenbery's five qualities of usability, and Carliner's information design theories, for use in technical writing service learning courses. The needs assessment was based…

10 CFR 60.132 - Additional design criteria for surface facilities in the geologic repository operations area.

Code of Federal Regulations, 2010 CFR

2010-01-01

... geologic repository operations area. 60.132 Section 60.132 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository Operations Area § 60.132 Additional design criteria for surface facilities in...

A Fundamental Methodology for Designing Management Information Systems for Schools.

ERIC Educational Resources Information Center

Visscher, Adrie J.

Computer-assisted school information systems (SISs) are developed and used worldwide; however, the literature on strategies for their design and development is lacking. This paper presents the features of a fundamental approach to systems design that proved to be successful when developing SCHOLIS, a computer-assisted SIS for Dutch secondary…

Getting the most out of additional guidance information in deformable image registration by leveraging multi-objective optimization

NASA Astrophysics Data System (ADS)

Alderliesten, Tanja; Bosman, Peter A. N.; Bel, Arjan

2015-03-01

Incorporating additional guidance information, e.g., landmark/contour correspondence, in deformable image registration is often desirable and is typically done by adding constraints or cost terms to the optimization function. Commonly, deciding between a "hard" constraint and a "soft" additional cost term as well as the weighting of cost terms in the optimization function is done on a trial-and-error basis. The aim of this study is to investigate the advantages of exploiting guidance information by taking a multi-objective optimization perspective. Hereto, next to objectives related to match quality and amount of deformation, we define a third objective related to guidance information. Multi-objective optimization eliminates the need to a-priori tune a weighting of objectives in a single optimization function or the strict requirement of fulfilling hard guidance constraints. Instead, Pareto-efficient trade-offs between all objectives are found, effectively making the introduction of guidance information straightforward, independent of its type or scale. Further, since complete Pareto fronts also contain less interesting parts (i.e., solutions with near-zero deformation effort), we study how adaptive steering mechanisms can be incorporated to automatically focus more on solutions of interest. We performed experiments on artificial and real clinical data with large differences, including disappearing structures. Results show the substantial benefit of using additional guidance information. Moreover, compared to the 2-objective case, additional computational cost is negligible. Finally, with the same computational budget, use of the adaptive steering mechanism provides superior solutions in the area of interest.

User perception and interpretation of tornado probabilistic hazard information: Comparison of four graphical designs.

PubMed

Miran, Seyed M; Ling, Chen; James, Joseph J; Gerard, Alan; Rothfusz, Lans

2017-11-01

Effective design for presenting severe weather information is important to reduce devastating consequences of severe weather. The Probabilistic Hazard Information (PHI) system for severe weather is being developed by NOAA National Severe Storms Laboratory (NSSL) to communicate probabilistic hazardous weather information. This study investigates the effects of four PHI graphical designs for tornado threat, namely, "four-color"," red-scale", "grayscale" and "contour", on users' perception, interpretation, and reaction to threat information. PHI is presented on either a map background or a radar background. Analysis showed that the accuracy was significantly higher and response time faster when PHI was displayed on map background as compared to radar background due to better contrast. When displayed on a radar background, "grayscale" design resulted in a higher accuracy of responses. Possibly due to familiarity, participants reported four-color design as their favorite design, which also resulted in the fastest recognition of probability levels on both backgrounds. Our study shows the importance of using intuitive color-coding and sufficient contrast in conveying probabilistic threat information via graphical design. We also found that users follows a rational perceiving-judging-feeling-and acting approach in processing probabilistic hazard information for tornado. Copyright © 2017 Elsevier Ltd. All rights reserved.

Technical and economic assessment of design efficiency of information and measuring systems

NASA Astrophysics Data System (ADS)

Yurov, V. M.; Eremin, E. N.; Baisagov, Ya Zh; Arkhipov, V. V.

2018-01-01

A thermodynamic approach to the analysis of information-measuring systems (IMS) is developed in the work. Expressions for efficiency of IMS are obtained. The connection between the amount of processor memory and the amount of incoming information and the accuracy of the IMS is obtained. It is shown that the probability of information loss in IMS decreases with the increase in the amount of information from the object. Using the analogy method, economic aspects of IMS design are considered. The innate ability of IMS and Moore’s law are considered. The proposed approach and the resulting formulas will be useful in the design of new IMS.

Developments in Participatory Design of Health Information Technology - A Review of PDC Publications from 1990-2016.

PubMed

Kanstrup, Anne Marie; Madsen, Jacob; Nøhr, Christian; Bygholm, Ann; Bertelsen, Pernille

2017-01-01

The landscape of Participatory Design (PD) of Health Information Technology (HIT) is diverse and constantly evolving. This paper reviews the publications in the proceedings from the Participatory Design Conferences (PDCs) that have been held every two years since 1990. We used the Matrix Method to identify, describe and synthesise HIT publications from the proceedings. A total of 47 papers were included in the review and analysed in relation to six themes. The analysis reveals a significant volume of HIT research at PDCs, with a large amount of attention to digitalisation of health information, work procedures, records, secondary healthcare and health professionals. However, the analysis also shows a development from a primary focus on health workers and hospitals to a recent attention on HIT in everyday life and PD with patients, relatives, neighbourhoods and citizens in general. Additionally, the review shows a growing number of PD methods being applied. This paper concludes that research on PD and HIT appears to be maturing and developing with ongoing technological and societal development.

How to retrieve additional information from the multiplicity distributions

NASA Astrophysics Data System (ADS)

Wilk, Grzegorz; Włodarczyk, Zbigniew

2017-01-01

Multiplicity distributions (MDs) P(N) measured in multiparticle production processes are most frequently described by the negative binomial distribution (NBD). However, with increasing collision energy some systematic discrepancies have become more and more apparent. They are usually attributed to the possible multi-source structure of the production process and described using a multi-NBD form of the MD. We investigate the possibility of keeping a single NBD but with its parameters depending on the multiplicity N. This is done by modifying the widely known clan model of particle production leading to the NBD form of P(N). This is then confronted with the approach based on the so-called cascade-stochastic formalism which is based on different types of recurrence relations defining P(N). We demonstrate that a combination of both approaches allows the retrieval of additional valuable information from the MDs, namely the oscillatory behavior of the counting statistics apparently visible in the high energy data.

Informal Learning in Professional and Personal Life: Implications for Instructional Design and Performance Improvement

ERIC Educational Resources Information Center

Klein, James D.; Moore, Alison L.

2016-01-01

This article focuses on informal learning and its implications for instructional design and performance improvement. The authors begin by sharing a story of how a novice instructional designer employs informal learning strategies in her professional and personal life. Next, they offer a definition of informal learning that encompasses both…

A new approach to design and use of management information.

PubMed

Daft, R L; MacIntosh, N B

1978-01-01

Information, that is both accurate and timely, is probably the most important resource needed by managers to make sound decisions regarding the problems and issues facing their organizations. Unfortunately, sophisticated information systems often fail to meet this need. Managers complain that the data produced by information systems arrive too late, are too general and lack accuracy. Daft and MacIntosh studied the system problems of a number of organizations, discovering that understanding their work activities is critical to the design of successful information systems. The authors also considered the volume of information, preciseness of information and the way in which it is handled by users to develop a model describing information systems. The article illustrates how the model was applied successfully to four case situations.

Addition of fraction in swimming context

NASA Astrophysics Data System (ADS)

Putri, R. I. I.; Gunawan, M. S.; Zulkardi

2017-12-01

This study aimed to produce learning trajectory that can help students in learning fractions by using swimming context. The study involved 37 fourth grade students with different capabilities in Elementary School IBA, South Sumatra, Indonesia. This study used an instructional theory called Indonesian version of Realistic Mathematics Education (PMRI). This research used design research method with three stages: preliminary design, the design experiment, and retrospective analysis. Several techniques used for collecting data including a video recording of students interaction in the group discussion, students’ work, and interviewing the students. To conclude, the swimming context could stimulate students’ informal knowledge about the meaning of fractions in which it can be used in the additional learning either the same denominator or different denominator.

Mechanisms of Communicating Health Information Through Facebook: Implications for Consumer Health Information Technology Design.

PubMed

Menefee, Hannah K; Thompson, Morgan J; Guterbock, Thomas M; Williams, Ishan C; Valdez, Rupa S

2016-08-11

Consumer health information technology (IT) solutions are designed to support patient health management and have the ability to facilitate patients' health information communication with their social networks. However, there is a need for consumer health IT solutions to align with patients' health management preferences for increased adoption of the technology. It may be possible to gain an understanding of patients' needs for consumer health IT supporting their health information communication with social networks by explicating how they have adopted and adapted social networking sites, such as Facebook, for this purpose. Our aim was to characterize patients' use of all communication mechanisms within Facebook for health information communication to provide insight into how consumer health IT solutions may be better designed to meet patients' communication needs and preferences. This study analyzed data about Facebook communication mechanisms use from a larger, three-phase, sequential, mixed-methods study. We report here on the results of the study's first phase: qualitative interviews (N=25). Participants were over 18, used Facebook, were residents or citizens of the United States, spoke English, and had a diagnosis consistent with type 2 diabetes. Participants were recruited through Facebook groups and pages. Participant interviews were conducted via Skype or telephone between July and September 2014. Data analysis was grounded in qualitative content analysis and the initial coding framework was informed by the findings of a previous study. Participants' rationales for the use or disuse of a particular Facebook mechanism to communicate health information reflected six broad themes: (1) characteristics and circumstances of the person, (2) characteristics and circumstances of the relationship, (3) structure and composition of the social network, (4) content of the information, (5) communication purpose, and (6) attributes of the technology. The results of this

50 CFR 23.25 - What additional information is required on a non-Party CITES document?

Code of Federal Regulations, 2010 CFR

2010-10-01

....25 What additional information is required on a non-Party CITES document? (a) Purpose. Under Article... Certification (1) Export (i) For Appendix-I and -II specimens, the Scientific Authority has advised that the...

The Design of Case Products’ Shape Form Information Database Based on NURBS Surface

NASA Astrophysics Data System (ADS)

Liu, Xing; Liu, Guo-zhong; Xu, Nuo-qi; Zhang, Wei-she

2017-07-01

In order to improve the computer design of product shape design,applying the Non-uniform Rational B-splines(NURBS) of curves and surfaces surface to the representation of the product shape helps designers to design the product effectively.On the basis of the typical product image contour extraction and using Pro/Engineer(Pro/E) to extract the geometric feature of scanning mold,in order to structure the information data base system of value point,control point and node vector parameter information,this paper put forward a unified expression method of using NURBS curves and surfaces to describe products’ geometric shape and using matrix laboratory(MATLAB) to simulate when products have the same or similar function.A case study of electric vehicle’s front cover illustrates the access process of geometric shape information of case product in this paper.This method can not only greatly reduce the capacity of information debate,but also improve the effectiveness of computer aided geometric innovation modeling.

User-Centered Design, Experience, and Usability of an Electronic Consent User Interface to Facilitate Informed Decision-Making in an HIV Clinic.

PubMed

Ramos, S Raquel

2017-11-01

Health information exchange is the electronic accessibility and transferability of patient medical records across various healthcare settings and providers. In some states, patients have to formally give consent to allow their medical records to be electronically shared. The purpose of this study was to apply a novel user-centered, multistep, multiframework approach to design and test an electronic consent user interface, so patients with HIV can make more informed decisions about electronically sharing their health information. This study consisted of two steps. Step 1 was a cross-sectional, descriptive, qualitative study that used user-centric design interviews to create the user interface. This informed Step 2. Step 2 consisted of a one group posttest to examine perceptions of usefulness, ease of use, preference, and comprehension of a health information exchange electronic consent user interface. More than half of the study population had college experience, but challenges remained with overall comprehension regarding consent. The user interface was not independently successful, suggesting that in addition to an electronic consent user interface, human interaction may also be necessary to address the complexities associated with consenting to electronically share health information. Comprehension is key factor in the ability to make informed decisions.

78 FR 77686 - Designation of a Class of Employees for Addition to the Special Exposure Cohort

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Designation of a Class of Employees for Addition to the... Disease Control and Prevention, Department of Health and Human Services (HHS). ACTION: Notice. SUMMARY: HHS gives notice of a decision to designate a class of employees from the Rocky Flats Plant in Golden...

78 FR 64501 - Designation of a Class of Employees for Addition to the Special Exposure Cohort

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Designation of a Class of Employees for Addition to the... Disease Control and Prevention, Department of Health and Human Services (HHS). ACTION: Notice. SUMMARY: HHS gives notice of a decision to designate a class of employees from the Pantex Plant in Amarillo...

77 FR 76489 - Designation of a Class of Employees for Addition to the Special Exposure Cohort

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-28

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Designation of a Class of Employees for Addition to the... Disease Control and Prevention, Department of Health and Human Services (HHS). ACTION: Notice. SUMMARY: HHS gives notice of a decision to designate a class of employees from the Mound Plant in Miamisburg...

Engineering Design Thinking and Information Gathering. Final Report. Research in Engineering and Technology Education

ERIC Educational Resources Information Center

Mentzer, Nathan

2011-01-01

The objective of this research was to explore the relationship between information access and design solution quality of high school students presented with an engineering design problem. This objective is encompassed in the research question driving this inquiry: How does information access impact the design process? This question has emerged in…

User Preferences for Web-Based Module Design Layout and Design Impact on Information Recall Considering Age

ERIC Educational Resources Information Center

Pomales-García, Cristina; Rivera-Nivar, Mericia

2015-01-01

Research in design of Web-based modules should incorporate aging as an important factor given the diversity of the current workforce. This work aims to understand how Web-Based Learning modules can be designed to accommodate young (25-35 years) as well as older (55-65 years) users by: (1) identifying how information sources (instructor video,…

75 FR 35119 - 60-Day Notice of Proposed Information Collection: Form DS-4085 Application for Additional Visa...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... DS-4085 Application for Additional Visa Pages or Miscellaneous Passport Services, OMB Control Number... of Information Collection: Application for Additional Visa Pages or Miscellaneous Passport Services.... Originating Office: Bureau of Consular Affairs, Passport Services CA/PPT. Form Number: DS-4085. Respondents...

21 CFR 71.4 - Samples; additional information.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL COLOR... samples of the color additive, articles used as components thereof, or of the food, drug, or cosmetic in... additive, or articles used as components thereof, or of the food, drug, or cosmetic in which the color...

21 CFR 71.4 - Samples; additional information.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL COLOR... samples of the color additive, articles used as components thereof, or of the food, drug, or cosmetic in... additive, or articles used as components thereof, or of the food, drug, or cosmetic in which the color...

21 CFR 71.4 - Samples; additional information.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL COLOR... samples of the color additive, articles used as components thereof, or of the food, drug, or cosmetic in... additive, or articles used as components thereof, or of the food, drug, or cosmetic in which the color...

21 CFR 71.4 - Samples; additional information.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL COLOR... samples of the color additive, articles used as components thereof, or of the food, drug, or cosmetic in... additive, or articles used as components thereof, or of the food, drug, or cosmetic in which the color...

21 CFR 71.4 - Samples; additional information.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL COLOR... samples of the color additive, articles used as components thereof, or of the food, drug, or cosmetic in... additive, or articles used as components thereof, or of the food, drug, or cosmetic in which the color...

Informational ergonomics and design: signage design for Monte Sião Camp.

PubMed

Marques, Luiz Guilherme Oliveira; Cardoso, Vânia Maria Batalha

2012-01-01

This paper refers to the development of a signage system, driven by the vector of Signage Design and Informational Ergonomics associated with Regulatory Standards. The methodology of the Ergonomic Intervention of Moraes and Mont'Alvão (2003), in its early stages, and the Method of the Signage Pyramid of Calori (2007) were used to develop the research, data collection and analysis and to guide the design by a signaling system. The system contemplated by this job is called Mount Zion, a site of 19 hectares, which has signs of disturbance. As a result, we obtained a signaling system, with graphic features that refer to formal-site, capable of meeting the needs of orientation and displacement inherent to the site.

End-to-End Information System design at the NASA Jet Propulsion Laboratory

NASA Technical Reports Server (NTRS)

Hooke, A. J.

1978-01-01

Recognizing a pressing need of the 1980s to optimize the two-way flow of information between a ground-based user and a remote space-based sensor, an end-to-end approach to the design of information systems has been adopted at the Jet Propulsion Laboratory. The objectives of this effort are to ensure that all flight projects adequately cope with information flow problems at an early stage of system design, and that cost-effective, multi-mission capabilities are developed when capital investments are made in supporting elements. The paper reviews the End-to-End Information System (EEIS) activity at the Laboratory, and notes the ties to the NASA End-to-End Data System program.

A systems-approach to the design of the Eos data and information system

NASA Technical Reports Server (NTRS)

Chase, Robert R. P.

1987-01-01

The task of designing a data and information system responsive to the needs of Eos users is stratified by level and approached with contemporary systems design practices. Appropriate systems design principles are applied at the conceptual design level in this paper. A functional, architectural design is described in terms of elemental composition, top-level functions, and external and internal interfaces. The functional validity of this design has been tested and verified through the use of realistic user scenarios consistent with existing plans for the 1990s, the Space Station era. Technologic and management impediments to the development of the requisite data and information system for Eos are examined and a consistent methodology for developing this system is discussed.

[FADCC in NIHS for prior consultation system of application of food additives].

PubMed

Akiyama, Hiroshi; Sato, Kyoko

2015-01-01

An increasing number of inquiries about application of food additives have been made from businesses in and outside Japan. The Ministry of Health, Labour and Welfare (MHLW) is requested to expedite the procedure for designation and revision of use standards. In June 2014, the MHLW set up a center for consultation on application concerning food additives (Food Additive Designation Consultation Center, FADCC) in the National Institute of Health Sciences, aiming to smoothly and expeditiously handle clerical work for designation or revision of the use standards. FADCC gives advice on how to prepare documents on the information such as physicochemical characteristics, effectiveness, safety, daily intake and use standards, based on actual cases and experience.

Design and information requirements for travel and tourism needs on scenic byways.

DOT National Transportation Integrated Search

1994-01-01

The purpose of this study was to develop a system design and information evaluation process that could be used to review proposed or designated scenic byways. The process was intended to ensure that the geometric and traffic design of these roads wer...

Usability engineering for augmented reality: employing user-based studies to inform design.

PubMed

Gabbard, Joseph L; Swan, J Edward

2008-01-01

A major challenge, and thus opportunity, in the field of human-computer interaction and specifically usability engineering is designing effective user interfaces for emerging technologies that have no established design guidelines or interaction metaphors or introduce completely new ways for users to perceive and interact with technology and the world around them. Clearly, augmented reality is one such emerging technology. We propose a usability engineering approach that employs user-based studies to inform design, by iteratively inserting a series of user-based studies into a traditional usability engineering lifecycle to better inform initial user interface designs. We present an exemplar user-based study conducted to gain insight into how users perceive text in outdoor augmented reality settings and to derive implications for design in outdoor augmented reality. We also describe lessons learned from our experiences conducting user-based studies as part of the design process.

An Evaluation of Alternative Designs for a Grid Information Service

NASA Technical Reports Server (NTRS)

Smith, Warren; Waheed, Abdul; Meyers, David; Yan, Jerry; Kwak, Dochan (Technical Monitor)

2001-01-01

The Globus information service wasn't working well. There were many updates of data from Globus daemons which saturated the single server and users couldn't retrieve information. We created a second server for NASA and Alliance. Things were great on that server, but a bit slow on the other server. We needed to know exactly how the information service was being used. What were the best servers and configurations? This viewgraph presentation gives an overview of the evaluation of alternative designs for a Grid Information Service. Details are given on the workload characterization, methodology used, and the performance evaluation.

The Barriers and Causes of Building Information Modelling Usage for Interior Design Industry

NASA Astrophysics Data System (ADS)

Hamid, A. B. Abd; Taib, M. Z. Mohd; Razak, A. H. N. Abdul; Embi, M. R.

2017-12-01

Building Information Modeling (BIM) has since developed alongside the improvement in the construction industry, purposely to simulate the design, management, construction and documentation. It facilitates and monitors the construction through visualization and emphasizes on various inputs to virtually design and construct a building using specific software. This study aims to identify and elaborate barriers of BIM usage in interior design industry in Malaysia. This study is initiated with a pilot survey utilising sixteen respondents that has been randomly chosen. Respondents are attached with interior design firms that are registered by Lembaga Arkitek Malaysia (LAM). The research findings are expected to provide significant information to encourage BIM adoption among interior design firms.

Risk Informed Design as Part of the Systems Engineering Process

NASA Technical Reports Server (NTRS)

Deckert, George

2010-01-01

This slide presentation reviews the importance of Risk Informed Design (RID) as an important feature of the systems engineering process. RID is based on the principle that risk is a design commodity such as mass, volume, cost or power. It also reviews Probabilistic Risk Assessment (PRA) as it is used in the product life cycle in the development of NASA's Constellation Program.

Categorization and modeling of information work for H-journal design.

PubMed Central

Sundaram, A.

1996-01-01

This paper reports on a doctoral research project that examined the work of reference librarians in the health sciences domain. Categories of information work are derived and used to build Hyper-MedLib, a proof-of-concept h-journal. Findings from this study may be used in the design of electronic documents and information systems for the practice environments. PMID:8947690

Illinois Occupational Skill Standards: Information Technology Design/Build Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document contains Illinois Occupational Skill Standards for occupations in the Information Technology Design and Build Cluster (technical writer, programmer, system analyst, network architect, application product architect, network engineer, and database administrator). The skill standards define what an individual should know and the…

Information system and website design to support theautomotive manufacture ERP system

NASA Astrophysics Data System (ADS)

Amran, T. G.; Azmi, N.; Surjawati, A. A.

2017-12-01

This research is to create an on-time production system design with Heijunka model so that the product diversity for all models could meet time and capacity requirements, own production flexibility, high quality, meet the customers’ demands, realistic in production as well as creating a web-based local components’ order information system that supports the Enterprise Resource Planning (ERP) system. The Heijunka model for equalization with heuristic and stochastic model has been implemented for productions up to 3000 units by implementing Suzuki International Manufacturing. The inefficiency in the local order information system demanded the need for a new information system design that is integrated in ERP. Kaizen needs to be done is the Supplier Network that all vendors can download and utilize those data to deliver the components to the company and for vendors’ internal uses as well. The model design is presumed effective where the model is able to be utilized as a solution so that the production can run according to the schedule and presumed efficient were the model is able to show the reduction of loss time and stock.

Navigation and Alignment Aids Concept of Operations and Supplemental Design Information. Revision A

NASA Technical Reports Server (NTRS)

Kelly, Sean M.; Cryan, Scott P.

2016-01-01

The IDSS Navigation and Alignment Aids Concept of Operations and Supplemental Design Information document provides supplemental information to the IDSS IDD. The guide provides insight into the navigation and alignment aids design, and how those aids can be utilized by incoming vehicles for proximity operations and docking. The navigation aids are paramount to successful docking.

Networking Sensors for Information Dominance - Joint Signal Processing and Communication Design

DTIC Science & Technology

2012-01-01

2012 4. TITLE AND SUBTITLE NETWORKING SENSORS FOR INFORMATION DOMINANCE - JOINT SIGNAL PROCESSING AND COMMUNICATION DESIGN, Final Report for FA9550...Rev. 2-89) Prescribed by ANSI Std. Z39-18 298-102 Public A AFRL-OSR-VA-TR-2012-0729 NETWORKING SENSORS FOR INFORMATION DOMINANCE - JOINT

Regression analysis of informative current status data with the additive hazards model.

PubMed

Zhao, Shishun; Hu, Tao; Ma, Ling; Wang, Peijie; Sun, Jianguo

2015-04-01

This paper discusses regression analysis of current status failure time data arising from the additive hazards model in the presence of informative censoring. Many methods have been developed for regression analysis of current status data under various regression models if the censoring is noninformative, and also there exists a large literature on parametric analysis of informative current status data in the context of tumorgenicity experiments. In this paper, a semiparametric maximum likelihood estimation procedure is presented and in the method, the copula model is employed to describe the relationship between the failure time of interest and the censoring time. Furthermore, I-splines are used to approximate the nonparametric functions involved and the asymptotic consistency and normality of the proposed estimators are established. A simulation study is conducted and indicates that the proposed approach works well for practical situations. An illustrative example is also provided.

Informal Reading Inventories: Creating Teacher-Designed Literature-Based Assessments

ERIC Educational Resources Information Center

Provost, Mary C.; Lambert, Monica A.; Babkie, Andrea M.

2010-01-01

Mandates emphasizing student achievement have increased the importance of appropriate assessment techniques for students in general and special education classrooms. Informal reading inventories (IRIs), designed by classroom teachers, have been proven to be an efficient and effective way to determine students' strengths, weaknesses, and strategies…

Mechanisms of Communicating Health Information Through Facebook: Implications for Consumer Health Information Technology Design

PubMed Central

Menefee, Hannah K; Thompson, Morgan J; Guterbock, Thomas M; Williams, Ishan C

2016-01-01

Background Consumer health information technology (IT) solutions are designed to support patient health management and have the ability to facilitate patients’ health information communication with their social networks. However, there is a need for consumer health IT solutions to align with patients’ health management preferences for increased adoption of the technology. It may be possible to gain an understanding of patients’ needs for consumer health IT supporting their health information communication with social networks by explicating how they have adopted and adapted social networking sites, such as Facebook, for this purpose. Objective Our aim was to characterize patients’ use of all communication mechanisms within Facebook for health information communication to provide insight into how consumer health IT solutions may be better designed to meet patients’ communication needs and preferences. Methods This study analyzed data about Facebook communication mechanisms use from a larger, three-phase, sequential, mixed-methods study. We report here on the results of the study’s first phase: qualitative interviews (N=25). Participants were over 18, used Facebook, were residents or citizens of the United States, spoke English, and had a diagnosis consistent with type 2 diabetes. Participants were recruited through Facebook groups and pages. Participant interviews were conducted via Skype or telephone between July and September 2014. Data analysis was grounded in qualitative content analysis and the initial coding framework was informed by the findings of a previous study. Results Participants’ rationales for the use or disuse of a particular Facebook mechanism to communicate health information reflected six broad themes: (1) characteristics and circumstances of the person, (2) characteristics and circumstances of the relationship, (3) structure and composition of the social network, (4) content of the information, (5) communication purpose, and (6

Processes in construction of failure management expert systems from device design information

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Lance, Nick

1987-01-01

This paper analyzes the tasks and problem solving methods used by an engineer in constructing a failure management expert system from design information about the device to te diagnosed. An expert test engineer developed a trouble-shooting expert system based on device design information and experience with similar devices, rather than on specific expert knowledge gained from operating the device or troubleshooting its failures. The construction of the expert system was intensively observed and analyzed. This paper characterizes the knowledge, tasks, methods, and design decisions involved in constructing this type of expert system, and makes recommendations concerning tools for aiding and automating construction of such systems.

An information theoretic approach of designing sparse kernel adaptive filters.

PubMed

Liu, Weifeng; Park, Il; Principe, José C

2009-12-01

This paper discusses an information theoretic approach of designing sparse kernel adaptive filters. To determine useful data to be learned and remove redundant ones, a subjective information measure called surprise is introduced. Surprise captures the amount of information a datum contains which is transferable to a learning system. Based on this concept, we propose a systematic sparsification scheme, which can drastically reduce the time and space complexity without harming the performance of kernel adaptive filters. Nonlinear regression, short term chaotic time-series prediction, and long term time-series forecasting examples are presented.

Design, methodology, and baseline data of the Personalized Addition Lenses Clinical Trial (PACT)

PubMed Central

Yu, Xinping; Zhang, Binjun; Bao, Jinhua; Zhang, Junxiao; Wu, Ge; Xu, Jinling; Zheng, Jingwei; Drobe, Björn; Chen, Hao

2017-01-01

Abstract Background: The aim of this study was to describe the design, methods, and baseline characteristics of children enrolled in the Personalized Addition lenses Clinical Trial (PACT). PACT aims to test the myopia control efficacy of progressive addition lenses (PALs) with personalized addition values compared with standard (+2.00 D) addition PALs and single vision lenses (SVLs). Methods: PACT is a randomized, controlled, double-masked clinical trial. Two hundred eleven myopic Chinese children (7–12 years) were enrolled and randomized into 1 of the 3 following groups: personalized addition PALs; +2.00 addition PALs; and SVLs. Personalized addition values were determined based on the highest addition that satisfied Sheard criterion. Axial length and other biometric data were also recorded. Results: At baseline, no differences were found between the right and left eyes for any of the main parameters. The enrolled children were 9.7 ± 1.1 years’ old with cycloplegic autorefraction (right eye [OD]: −2.36 ± 0.64 D), near phoria (1.0 ± 5.0 prism diopter esophoria), lag of accommodation (1.40 ± 0.50 D) and axial length (OD: 24.58 ± 0.74 mm). The personalized addition values ranged from +0.75 to +3.00 (average ± SD: 2.19 ± 0.73 D). Conclusion: PACT is a clinical trial evaluating whether myopia progression in children can be slowed by wearing personalized addition PALs compared with fixed addition PALs and SVLs as measured by cycloplegic autorefraction and axial length. Baseline data were comparable with those of previous myopia control studies in children. Subjects will be followed up every 6 months for 2 years. PMID:28296722

"Glitch Logic" and Applications to Computing and Information Security

NASA Technical Reports Server (NTRS)

Stoica, Adrian; Katkoori, Srinivas

2009-01-01

This paper introduces a new method of information processing in digital systems, and discusses its potential benefits to computing and information security. The new method exploits glitches caused by delays in logic circuits for carrying and processing information. Glitch processing is hidden to conventional logic analyses and undetectable by traditional reverse engineering techniques. It enables the creation of new logic design methods that allow for an additional controllable "glitch logic" processing layer embedded into a conventional synchronous digital circuits as a hidden/covert information flow channel. The combination of synchronous logic with specific glitch logic design acting as an additional computing channel reduces the number of equivalent logic designs resulting from synthesis, thus implicitly reducing the possibility of modification and/or tampering with the design. The hidden information channel produced by the glitch logic can be used: 1) for covert computing/communication, 2) to prevent reverse engineering, tampering, and alteration of design, and 3) to act as a channel for information infiltration/exfiltration and propagation of viruses/spyware/Trojan horses.

Hospital information system: reusability, designing, modelling, recommendations for implementing.

PubMed

Huet, B

1998-01-01

The aims of this paper are to precise some essential conditions for building reuse models for hospital information systems (HIS) and to present an application for hospital clinical laboratories. Reusability is a general trend in software, however reuse can involve a more or less part of design, classes, programs; consequently, a project involving reusability must be precisely defined. In the introduction it is seen trends in software, the stakes of reuse models for HIS and the special use case constituted with a HIS. The main three parts of this paper are: 1) Designing a reuse model (which objects are common to several information systems?) 2) A reuse model for hospital clinical laboratories (a genspec object model is presented for all laboratories: biochemistry, bacteriology, parasitology, pharmacology, ...) 3) Recommendations for generating plug-compatible software components (a reuse model can be implemented as a framework, concrete factors that increase reusability are presented). In conclusion reusability is a subtle exercise of which project must be previously and carefully defined.

Informal Conversations and Learning Among Dental Students: Influence of School Design.

ERIC Educational Resources Information Center

Myrick, Richard; Marx, Barbara Spencer

1967-01-01

Data are presented from an exploratory study examining the influence of dental school building design on the quality and quantity of student information conversations. The purposes of the research were to determine--(1) what patterns of interaction exist commonly among dental students, and (2) how the architectural design of the building…

An approach to the design of statewide or regional ground water information systems

USGS Publications Warehouse

Winter, Thomas C.

1972-01-01

The design of water information or basic data systems must be flexible enough to provide information and data for a broad range of interests from national to local. The system must satisfy the need for information for accounting, surveillance, and areal synthesis purposes. The network is designed by identifying specific needs in terms of maps, analyses, and studies that will provide the basic knowledge for understanding each particular phase of the groundwater system. Each specific need is then analyzed with respect to whether it will provide information on accounting, surveillance, or areal synthesis. If a particular type of map, analysis, or observation can serve any of these three functions, a network of data collection or a program of studies is outlined in detail that will provide the information needed. The method of design necessitates the establishment of accuracy levels for maps, the density of data points, confidence limits, and so forth. The information system should be under the general guidance of a single agency, but much of the work and responsibility to carry out the details of the system must be shared by a number of agencies.

Designing an Integrated System of Databases: A Workstation for Information Seekers.

ERIC Educational Resources Information Center

Micco, Mary; Smith, Irma

1987-01-01

Proposes a framework for the design of a full function workstation for information retrieval based on study of information seeking behavior. A large amount of local storage of the CD-ROM jukebox variety and full networking capability to both local and external databases are identified as requirements of the prototype. (MES)

Theoretical and experimental investigation of design for multioptical-axis freeform progressive addition lenses

NASA Astrophysics Data System (ADS)

Xiang, HuaZhong; Chen, JiaBi; Zhu, TianFen; Wei, YeFei; Fu, DongXiang

2015-11-01

A freeform progressive addition lens (PAL) provides a good solution to correct presbyopia and prevent juvenile myopia by distributing pupils' optical powers of distance zone, near zone, and intermediate zone and is more widely adopted in the present optometric study. However, there is still a lack of a single-optical-axis system for the design of a PAL. This paper focuses on the research for an approach for designing a freeform PAL. A multioptical-axis system based on real viewing conditions using the eyes is employed for the representation of the freeform surface. We filled small pupils in the intermediate zone as a progressive corridor and the distance- and near-vision portions were defined as the standard spherical surfaces delimited by quadratic curves. Three freeform PALs with a spherical surface as the front side and a freeform surface as the backside were designed. We demonstrate the fabrication and measurement technologies for the PAL surface using computer numerical control machine tools from Schneider Smart and a Visionix VM-2000 Lens Power Mapper. Surface power and astigmatic values were obtained. Preliminary results showed that the approach for the design and fabrication is helpful to advance the design procedure optimization and mass production of PALs in optometry.

Using a logical information model-driven design process in healthcare.

PubMed

Cheong, Yu Chye; Bird, Linda; Tun, Nwe Ni; Brooks, Colleen

2011-01-01

A hybrid standards-based approach has been adopted in Singapore to develop a Logical Information Model (LIM) for healthcare information exchange. The Singapore LIM uses a combination of international standards, including ISO13606-1 (a reference model for electronic health record communication), ISO21090 (healthcare datatypes), SNOMED CT (healthcare terminology) and HL7 v2 (healthcare messaging). This logic-based design approach also incorporates mechanisms for achieving bi-directional semantic interoperability.

Peripheral Design of Progressive Addition Lenses and the Lag of Accommodation in Myopes.

PubMed

Schilling, Tim; Ohlendorf, Arne; Varnas, Saulius R; Wahl, Siegfried

2017-07-01

Insufficient accommodative response is assumed to result in myopia progression. We have investigated if the accommodative lag in myopes is different between a single vision lens (SVL) and the progressive addition lens PAL 2, clinically trialled for its ability to reduce progression of myopia, and if there exist differences in accommodative lag between PAL 2 and other PALs with the same addition power (+1.50 D). The influence of spherical SVL and four different designs of PALs that differ in the near zone width (PAL 1) or that have different signs and magnitude of horizontal gradients of mean power adjacent to their near vision zones (PAL 3 and PAL 4) on the accommodative response was investigated for different near viewing distances (40, 33, and 25 cm) in 31 subjects, aged 18 to 25 years. The SVL correction resulted in insufficient accommodative response for the near object viewing distances tested. PAL 2 did significantly reduce accommodative lag for all near object distances tested. The PAL design with a more negative horizontal mean power gradient (PAL 4) provided a lower lag of accommodation when compared with PAL 2 at the shortest object distance of 25 cm (P = 0.03) and was able to reduce the lag of accommodation to a level below the depth of focus for the higher near working distances tested. Designs of PAL with more negative horizontal mean power gradients are the most effective in lowering the lag of accommodation in myopes. This could make them good test candidates for myopia control applications.

Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs.

PubMed

Sing, Swee Leong; An, Jia; Yeong, Wai Yee; Wiria, Florencia Edith

2016-03-01

Additive manufacturing (AM), also commonly known as 3D printing, allows the direct fabrication of functional parts with complex shapes from digital models. In this review, the current progress of two AM processes suitable for metallic orthopaedic implant applications, namely selective laser melting (SLM) and electron beam melting (EBM) are presented. Several critical design factors such as the need for data acquisition for patient-specific design, design dependent porosity for osteo-inductive implants, surface topology of the implants and design for reduction of stress-shielding in implants are discussed. Additive manufactured biomaterials such as 316L stainless steel, titanium-6aluminium-4vanadium (Ti6Al4V) and cobalt-chromium (CoCr) are highlighted. Limitations and future potential of such technologies are also explored. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

An Examination of the Addition of Video Informed Reflective Practice to the Active Support Toolkit

ERIC Educational Resources Information Center

Baker, Peter; Appleton, Philippa; Williams, Rosie

2017-01-01

Background: This study evaluated a package of Active Support (AS), which included standard training with additional video informed reflective practice. Materials & Methods: The training package was implemented as part of a service improvement initiative in four residential intellectual disability homes, using a concurrent multiple baseline…

Informed Additive Literacy Instruction for ELLs

ERIC Educational Resources Information Center

Bauer, Eurydice Bouchereau

2009-01-01

There are numerous reasons why schools struggle to provide English-language learners (ELLs) with additive literacy instruction. One reason for this is the lack of available trained bilingual teachers, mainstream teachers who have not received adequate training on how to teach ELLs, and the current political climate that appears to support an…

The designing and implementation of PE teaching information resource database based on broadband network

NASA Astrophysics Data System (ADS)

Wang, Jian

2017-01-01

In order to change traditional PE teaching mode and realize the interconnection, interworking and sharing of PE teaching resources, a distance PE teaching platform based on broadband network is designed and PE teaching information resource database is set up. The designing of PE teaching information resource database takes Windows NT 4/2000Server as operating system platform, Microsoft SQL Server 7.0 as RDBMS, and takes NAS technology for data storage and flow technology for video service. The analysis of system designing and implementation shows that the dynamic PE teaching information resource sharing platform based on Web Service can realize loose coupling collaboration, realize dynamic integration and active integration and has good integration, openness and encapsulation. The distance PE teaching platform based on Web Service and the design scheme of PE teaching information resource database can effectively solve and realize the interconnection, interworking and sharing of PE teaching resources and adapt to the informatization development demands of PE teaching.

Computational Modeling of Space Physiology for Informing Spaceflight Countermeasure Design and Predictions of Efficacy

NASA Technical Reports Server (NTRS)

Lewandowski, B. E.; DeWitt, J. K.; Gallo, C. A.; Gilkey, K. M.; Godfrey, A. P.; Humphreys, B. T.; Jagodnik, K. M.; Kassemi, M.; Myers, J. G.; Nelson, E. S.;

Halogenation of Hydraulic Fracturing Additives in the Shale Well Parameter Space

NASA Astrophysics Data System (ADS)

Sumner, A. J.; Plata, D.

2017-12-01

Horizontal Drilling and Hydraulic fracturing (HDHF) involves the deep-well injection of a `fracking fluid' composed of diverse and numerous chemical additives designed to facilitate the release and collection of natural gas from shale plays. The potential impacts of HDHF operations on water resources and ecosystems are numerous, and analyses of flowback samples revealed organic compounds from both geogenic and anthropogenic sources. Furthermore, halogenated chemicals were also detected, and these compounds are rarely disclosed, suggesting the in situ halogenation of reactive additives. To test this transformation hypothesis, we designed and operated a novel high pressure and temperature reactor system to simulate the shale well parameter space and investigate the chemical reactivity of twelve commonly disclosed and functionally diverse HDHF additives. Early results revealed an unanticipated halogenation pathway of α-β unsaturated aldehyde, Cinnamaldehyde, in the presence of oxidant and concentrated brine. Ongoing experiments over a range of parameters informed a proposed mechanism, demonstrating the role of various shale-well specific parameters in enabling the demonstrated halogenation pathway. Ultimately, these results will inform a host of potentially unintended interactions of HDHF additives during the extreme conditions down-bore of a shale well during HDHF activities.

Design and additive manufacture for flow chemistry.

PubMed

Capel, Andrew J; Edmondson, Steve; Christie, Steven D R; Goodridge, Ruth D; Bibb, Richard J; Thurstans, Matthew

2013-12-07

We review the use of additive manufacturing (AM) as a novel manufacturing technique for the production of milli-scale reactor systems. Five well-developed additive manufacturing techniques: stereolithography (SL), multi-jet modelling (MJM), selective laser melting (SLM), laser sintering (LS) and fused deposition modelling (FDM) were used to manufacture a number of miniaturised reactors which were tested using a range of organic and inorganic reactions.

Design and Feasibility of an Intervention to Support Cancer Genetic Counselees in Informing their At-Risk Relatives.

PubMed

de Geus, Eveline; Eijzenga, Willem; Menko, Fred H; Sijmons, Rolf H; de Haes, Hanneke C J M; Aalfs, Cora M; Smets, Ellen M A

2016-12-01

Cancer genetic counselees receive individualized information regarding heightened risks and medical recommendations which is also relevant for their at-risk relatives. Unfortunately, counselees often insufficiently inform these relatives. We designed an intervention aimed at improving counselees' knowledge regarding which at-risk relatives to inform and what information to disclose, their motivation to disclose, and their self-efficacy. The intervention, offered by telephone by trained psychosocial workers, is based on the principles of Motivational Interviewing. Phase 1 of the intervention covers agenda setting, exploration, and evaluation, and phase 2 includes information provision, enhancing motivation and self-efficacy, and brainstorming for solutions to disseminate information within the family. Fidelity and acceptability of the intervention were assessed using recordings of intervention sessions and by counselee self-report. A total of 144 counselees participated. Psychosocial workers (n = 5) delivered the intervention largely as intended. Counselees highly appreciated the content of the intervention and the psychosocial workers who delivered the intervention. In the sessions, psychosocial workers provided additional and/or corrective information, and brainstorming for solutions was performed in 70 %. These results indicate that this intervention is feasible and warrants testing in clinical practice. For this, a randomized controlled trial is currently in progress to test the intervention's efficacy.

Teledermatology in a capitated delivery system using distributed information architecture: design and development.

PubMed

Kvedar, J C; Menn, E R; Baradagunta, S; Smulders-Meyer, O; Gonzalez, E

1999-01-01

This report describes the design, development, and technical evaluation of a teledermatology system utilizing digital images and electronic forms captured through, stored on, and viewed through a common web server in an urban capitated delivery system. The authors designed a system whereby a primary care physician was able to seek a dermatologic consultation electronically, provide the specialist with digital images acquired according to a standardized protocol, and review the specialist response within 2 business days of the request. The settings were two primary care practices in eastern Massachusetts that were affiliated with a large integrated delivery system. Technical evaluation of the effectiveness of the system involved 18 patients. Main outcome measures included physician and patient satisfaction and comfort and efficiency of care delivery. In 15 cases, the consultant dermatologist was comfortable in providing definitive diagnosis and treatment recommendations. In 3 cases, additional information (laboratory studies or more history) was requested. There were no instances where the dermatologist felt that a face-to-face visit was necessary. This novel approach shows promise for the delivery of specialist expertise via the internet. Cost-effectiveness studies may be necessary for more widespread implementation.

76 FR 6056 - Additional Air Quality Designations for the 2006 24-Hour Fine Particle National Ambient Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-03

...-9261-3] RIN 2060-AQ30 Additional Air Quality Designations for the 2006 24-Hour Fine Particle National..., and Decisions Related to the 1997 Air Quality Designations and Classifications for the Annual Fine... nationwide for all but three areas for the 2006 24-hour fine particle (PM 2.5 ) National Ambient Air Quality...

Cyber-Informed Engineering: The Need for a New Risk Informed and Design Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Price, Joseph Daniel; Anderson, Robert Stephen

Current engineering and risk management methodologies do not contain the foundational assumptions required to address the intelligent adversary’s capabilities in malevolent cyber attacks. Current methodologies focus on equipment failures or human error as initiating events for a hazard, while cyber attacks use the functionality of a trusted system to perform operations outside of the intended design and without the operator’s knowledge. These threats can by-pass or manipulate traditionally engineered safety barriers and present false information, invalidating the fundamental basis of a safety analysis. Cyber threats must be fundamentally analyzed from a completely new perspective where neither equipment nor human operationmore » can be fully trusted. A new risk analysis and design methodology needs to be developed to address this rapidly evolving threatscape.« less

May Stakeholders be Involved in Design Without Informed Consent? The Case of Hidden Design.

PubMed

Pols, A J K

2017-06-01

Stakeholder involvement in design is desirable from both a practical and an ethical point of view. It is difficult to do well, however, and some problems recur again and again, both of a practical nature, e.g. stakeholders acting strategically rather than openly, and of an ethical nature, e.g. power imbalances unduly affecting the outcome of the process. Hidden Design has been proposed as a method to deal with the practical problems of stakeholder involvement. It aims to do so by taking the observation of stakeholder actions, rather than the outcomes of a deliberative process, as its input. Furthermore, it hides from stakeholders the fact that a design process is taking place so that they will not behave differently than they otherwise would. Both aspects of Hidden Design have raised ethical worries. In this paper I make an ethical analysis of what it means for a design process to leave participants uninformed or deceived rather than acquiring their informed consent beforehand, and to use observation of actions rather than deliberation as input for design, using Hidden Design as a case study. This analysis is based on two sets of normative guidelines: the ethical guidelines for psychological research involving deception or uninformed participants from two professional psychological organisations, and Habermasian norms for a fair and just (deliberative) process. It supports the conclusion that stakeholder involvement in design organised in this way can be ethically acceptable, though under a number of conditions and constraints.

Exploring patients' health information communication practices with social network members as a foundation for consumer health IT design.

PubMed

Valdez, Rupa Sheth; Brennan, Patricia Flatley

2015-05-01

There is a need to ensure that the growing number of consumer health information technologies designed to support patient engagement account for the larger social context in which health is managed. Basic research on how patients engage this larger social context is needed as a precursor to the development of patient-centered consumer health information technology (IT) solutions. The purpose of this study was to inform the broader design of consumer health IT by characterizing patients' existing health information communication practices with their social network members. This qualitative study took place between 2010 and 2012 in a Midwestern city. Eighteen patients with chronic conditions participated in a semi-structured interview that was analyzed using qualitative content analysis and descriptive statistics. Emphasis was placed on recruiting a sample representing diverse cultural groups and including participants of low socioeconomic status. Participants' social networks included a wide range of individuals, spanning biological relatives, divinities, and second-degree relationships. Participants' rationales for health information communication reflected seven themes: (1) characteristics and circumstances of the person, (2) characteristics and circumstances of the relationship, (3) structure and composition of the social network, (4) content of the message, (5) orientation of the goal, (6) dimensions of the context, and (7) adaptive practices. This study demonstrates that patients' health information communication practices are multidimensional, engaging individuals beyond formal and informal caregivers and driven by characteristics of their personal lives and larger social contexts in addition to their health problem. New models of consumer health IT must be created to better align with the realities of patients' communication routines. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Curriculum information models in health professions education in Australia: an innovative approach to efficient curriculum design, development, and maintenance.

PubMed

Kruger, Estie; Tennant, Marc

2012-03-01

Over the last decade, there has been a significant increase in attention to the overall accountability of higher education in Australia, and this is expected to continue. Increased accountability has led to the need for more explicitly documented curricula. The curricula from ten health-related disciplines developed over the last five years in Australia were the basis of this study. Curriculum information modeling is an approach that allows for the dynamic nature of curricula since elements and their linkages can be moved about and reconnected into meaningful patterns. In addition, the models give disciplines and institutions the ability to effectively monitor curricula and draw comparisons in a more unified manner. Curriculum information models are an efficient innovation in the design and management of curricula in higher education and particularly in the health care disciplines. They rest on the principles of reusable elements and linkages independent of content that were first used in the design, construction, and maintenance of buildings. The translation of this approach to the higher education sector provides a higher level of interoperability of resources and a clearer pathway for content design within a curriculum.

LSP Composite Test Bed Design

NASA Technical Reports Server (NTRS)

Day, Arthur C.; Griess, Kenneth H.

2013-01-01

This document provides standalone information for the Lightning Strike Protection (LSP) Composite Substrate Test Bed Design. A six-sheet drawing set is reproduced for reference, as is some additional descriptive information on suitable sensors and use of the test bed.

Transforming care: medical practice design and information technology.

PubMed

Kilo, Charles M

2005-01-01

The transformation of the medical practice is possible today because of the advancement of system design knowledge coupled with innovations in information technology (IT). Examples of such transformed care are present today, and they are creating a roadmap for others. Those efforts are also elucidating critical issues in the use of IT to advance health care quality. Connectivity, electronic integration, and knowledge management are the key functionalities emerging as levers to promote this transformation.

Recent Additions to the General College Career Development Program Offerings.

ERIC Educational Resources Information Center

Hixson, Bruce, Ed.

1981-01-01

Recent additions to the career development offerings at the University of Minnesota's General College are described. The aviation training program, which is described by Thomas Brothen, is designed to prepare students for licensure testing through the Federal Aviation Administration. Background information on aviation training at the University of…

Software for Information Storage and Retrieval Tested, Evaluated and Compared: Part VI--Various Additional Programs.

ERIC Educational Resources Information Center

Sieverts, Eric G.; And Others

1993-01-01

Reports on tests evaluating nine microcomputer software packages designed for information storage and retrieval: BRS-Search, dtSearch, InfoBank, Micro-OPC, Q&A, STN-PFS, Strix, TINman, and ZYindex. Tables and narrative evaluations detail results related to security, hardware, user features, search capability, indexing, input, maintenance of files,…

The use of network theory to model disparate ship design information

NASA Astrophysics Data System (ADS)

Rigterink, Douglas; Piks, Rebecca; Singer, David J.

2014-06-01

This paper introduces the use of network theory to model and analyze disparate ship design information. This work will focus on a ship's distributed systems and their intra- and intersystem structures and interactions. The three system to be analyzed are: a passageway system, an electrical system, and a fire fighting system. These systems will be analyzed individually using common network metrics to glean information regarding their structures and attributes. The systems will also be subjected to community detection algorithms both separately and as a multiplex network to compare their similarities, differences, and interactions. Network theory will be shown to be useful in the early design stage due to its simplicity and ability to model any shipboard system.

Designing quantum information processing via structural physical approximation.

PubMed

Bae, Joonwoo

2017-10-01

In quantum information processing it may be possible to have efficient computation and secure communication beyond the limitations of classical systems. In a fundamental point of view, however, evolution of quantum systems by the laws of quantum mechanics is more restrictive than classical systems, identified to a specific form of dynamics, that is, unitary transformations and, consequently, positive and completely positive maps to subsystems. This also characterizes classes of disallowed transformations on quantum systems, among which positive but not completely maps are of particular interest as they characterize entangled states, a general resource in quantum information processing. Structural physical approximation offers a systematic way of approximating those non-physical maps, positive but not completely positive maps, with quantum channels. Since it has been proposed as a method of detecting entangled states, it has stimulated fundamental problems on classifications of positive maps and the structure of Hermitian operators and quantum states, as well as on quantum measurement such as quantum design in quantum information theory. It has developed efficient and feasible methods of directly detecting entangled states in practice, for which proof-of-principle experimental demonstrations have also been performed with photonic qubit states. Here, we present a comprehensive review on quantum information processing with structural physical approximations and the related progress. The review mainly focuses on properties of structural physical approximations and their applications toward practical information applications.

Designing quantum information processing via structural physical approximation

NASA Astrophysics Data System (ADS)

Bae, Joonwoo

2017-10-01

In quantum information processing it may be possible to have efficient computation and secure communication beyond the limitations of classical systems. In a fundamental point of view, however, evolution of quantum systems by the laws of quantum mechanics is more restrictive than classical systems, identified to a specific form of dynamics, that is, unitary transformations and, consequently, positive and completely positive maps to subsystems. This also characterizes classes of disallowed transformations on quantum systems, among which positive but not completely maps are of particular interest as they characterize entangled states, a general resource in quantum information processing. Structural physical approximation offers a systematic way of approximating those non-physical maps, positive but not completely positive maps, with quantum channels. Since it has been proposed as a method of detecting entangled states, it has stimulated fundamental problems on classifications of positive maps and the structure of Hermitian operators and quantum states, as well as on quantum measurement such as quantum design in quantum information theory. It has developed efficient and feasible methods of directly detecting entangled states in practice, for which proof-of-principle experimental demonstrations have also been performed with photonic qubit states. Here, we present a comprehensive review on quantum information processing with structural physical approximations and the related progress. The review mainly focuses on properties of structural physical approximations and their applications toward practical information applications.

75 FR 52543 - Notice of Proposed Information Collection for Public Comment; Requirements for Designating...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

... designation before they designate projects for elderly families only, non-elderly disabled families only, or elderly and disabled families. In this plan, PHAs must document why the designation is needed, information...

"Information in Context": Co-Designing Workplace Structures and Systems for Organizational Learning

ERIC Educational Resources Information Center

Somerville, Mary M.; Howard, Zaana

2010-01-01

Introduction: This paper discusses an "information in context" design project at Auraria Library in Denver, Colorado which aims to collaboratively create organizational structures and communication systems with and for library employees. Method: This action research project is founded within shared leadership, informed learning and…

Design of a Covert RFID Tag Network for Target Discovery and Target Information Routing

PubMed Central

Pan, Qihe; Narayanan, Ram M.

2011-01-01

Radio frequency identification (RFID) tags are small electronic devices working in the radio frequency range. They use wireless radio communications to automatically identify objects or people without the need for line-of-sight or contact, and are widely used in inventory tracking, object location, environmental monitoring. This paper presents a design of a covert RFID tag network for target discovery and target information routing. In the design, a static or very slowly moving target in the field of RFID tags transmits a distinct pseudo-noise signal, and the RFID tags in the network collect the target information and route it to the command center. A map of each RFID tag’s location is saved at command center, which can determine where a RFID tag is located based on each RFID tag’s ID. We propose the target information collection method with target association and clustering, and we also propose the information routing algorithm within the RFID tag network. The design and operation of the proposed algorithms are illustrated through examples. Simulation results demonstrate the effectiveness of the design. PMID:22163693

Design of a covert RFID tag network for target discovery and target information routing.

PubMed

Pan, Qihe; Narayanan, Ram M

2011-01-01

Radio frequency identification (RFID) tags are small electronic devices working in the radio frequency range. They use wireless radio communications to automatically identify objects or people without the need for line-of-sight or contact, and are widely used in inventory tracking, object location, environmental monitoring. This paper presents a design of a covert RFID tag network for target discovery and target information routing. In the design, a static or very slowly moving target in the field of RFID tags transmits a distinct pseudo-noise signal, and the RFID tags in the network collect the target information and route it to the command center. A map of each RFID tag's location is saved at command center, which can determine where a RFID tag is located based on each RFID tag's ID. We propose the target information collection method with target association and clustering, and we also propose the information routing algorithm within the RFID tag network. The design and operation of the proposed algorithms are illustrated through examples. Simulation results demonstrate the effectiveness of the design.

Supporting virtual enterprise design by a web-based information model

NASA Astrophysics Data System (ADS)

Li, Dong; Barn, Balbir; McKay, Alison; de Pennington, Alan

2001-10-01

Development of IT and its applications have led to significant changes in business processes. To pursue agility, flexibility and best service to customers, enterprises focus on their core competence and dynamically build relationships with partners to form virtual enterprises as customer driven temporary demand chains/networks. Building the networked enterprise needs responsively interactive decisions instead of a single-direction partner selection process. Benefits and risks in the combination should be systematically analysed, and aggregated information about value-adding abilities and risks of networks needs to be derived from interactions of all partners. In this research, a hierarchical information model to assess partnerships for designing virtual enterprises was developed. Internet technique has been applied to the evaluation process so that interactive decisions can be visualised and made responsively during the design process. The assessment is based on the process which allows each partner responds to requirements of the virtual enterprise by planning its operational process as a bidder. The assessment is then produced by making an aggregated value to represent prospect of the combination of partners given current bidding. Final design is a combination of partners with the greatest total value-adding capability and lowest risk.

Patients retrieving additional information via the Internet: a trend analysis in a Swedish population, 2000-05.

PubMed

Rahmqvist, Mikael; Bara, Ana-Claudia

2007-01-01

To examine the trends over five years for patients' seeking online additional health information about their disease/health problem to what the doctor has been giving, and investigate any differences in information-seeking behaviour according to age, gender, self-perceived health status, living area, and type of medical encounter. Data from three independent surveys conducted in 2000, 2002, and 2005 of a population with a recent experience of outpatient care[n]typesetter: please remove blue shading here and elsewhere[/n], including 24,800 respondents aged between 20 and 95, were analysed in a trend analysis and a logistic regression regarding background factors that may influence the seeking behaviour. During the study period, there was a significant increase in Internet use in most age groups. The total use among men 20-95 years old increased from 7% in 2000 to 18% in 2005 and from 9% to 25% for women respectively. The predictors for using the Internet as a source of information were: age, gender, self-perceived health status, living area, and the type of medical encounter (first or repeated). In 2005, women aged 20-49 used the Internet as a source to a significantly greater extent than men, even when all background factors were controlled for (OR 1.46 and CI 1.21-1.77). Swedish patients, especially the young and middle-aged, are to a substantial degree using the Internet to gather additional information on their disease. The benefits of this increase include more informed patients; however, there are inherent quality issues that require strategies for ensuring public access to high-quality health information online.

Design of a Model-Based Online Management Information System for Interlibrary Loan Networks.

ERIC Educational Resources Information Center

Rouse, Sandra H.; Rouse, William B.

1979-01-01

Discusses the design of a model-based management information system in terms of mathematical/statistical, information processing, and human factors issues and presents a prototype system for interlibrary loan networks. (Author/CWM)

Designing Social Media for Informal Learning and Knowledge Maturing in the Digital Workplace

ERIC Educational Resources Information Center

Ravenscroft, A.; Schmidt, A.; Cook, J.; Bradley, C.

2012-01-01

This paper presents an original approach to designing social media that support informal learning in the digital workplace. It adapts design-based research to take into account the embeddedness of interactions within digitally mediated work-based contexts. The approach is demonstrated through the design, implementation, and evaluation of software…

Community-based participatory research and user-centered design in a diabetes medication information and decision tool.

PubMed

Henderson, Vida A; Barr, Kathryn L; An, Lawrence C; Guajardo, Claudia; Newhouse, William; Mase, Rebecca; Heisler, Michele

2013-01-01

Together, community-based participatory research (CBPR), user-centered design (UCD), and health information technology (HIT) offer promising approaches to improve health disparities in low-resource settings. This article describes the application of CBPR and UCD principles to the development of iDecide/Decido, an interactive, tailored, web-based diabetes medication education and decision support tool delivered by community health workers (CHWs) to African American and Latino participants with diabetes in Southwest and Eastside Detroit. The decision aid is offered in English or Spanish and is delivered on an iPad in participants' homes. The overlapping principles of CBPR and UCD used to develop iDecide/Decido include a user-focused or community approach, equitable academic and community partnership in all study phases, an iterative development process that relies on input from all stakeholders, and a program experience that is specified, adapted, and implemented with the target community. Collaboration between community members, researchers, and developers is especially evident in the program's design concept, animations, pictographs, issue cards, goal setting, tailoring, and additional CHW tools. The principles of CBPR and UCD can be successfully applied in developing health information tools that are easy to use and understand, interactive, and target health disparities.

Information Architecture for the Web: The IA Matrix Approach to Designing Children's Portals.

ERIC Educational Resources Information Center

Large, Andrew; Beheshti, Jamshid; Cole, Charles

2002-01-01

Presents a matrix that can serve as a tool for designing the information architecture of a Web portal in a logical and systematic manner. Highlights include interfaces; metaphors; navigation; interaction; information retrieval; and an example of a children's Web portal to provide access to museum information. (Author/LRW)

40 CFR 141.154 - Required additional health information.

Code of Federal Regulations, 2014 CFR

2014-07-01

... skin damage and circulatory problems. (2) May write its own educational statement, but only in... MCL: (1) Must include a short informational statement about the impacts of nitrate on children using... its effects on children. The statement must include the following information: If present, elevated...

75 FR 64781 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-20

... Act. The list of additional designees is as follows: 1. JR CONTROLADORA DE RESTAURANTES, S.A. DE C.V...; Folio Mercantil No. 345497 (Mexico); (ENTITY) [BPI-SDNTK] 3. FLORBEL OPERADORA DE RESTAURANTES, S.A. DE...

An introduction to modeling longitudinal data with generalized additive models: applications to single-case designs.

PubMed

Sullivan, Kristynn J; Shadish, William R; Steiner, Peter M

2015-03-01

Single-case designs (SCDs) are short time series that assess intervention effects by measuring units repeatedly over time in both the presence and absence of treatment. This article introduces a statistical technique for analyzing SCD data that has not been much used in psychological and educational research: generalized additive models (GAMs). In parametric regression, the researcher must choose a functional form to impose on the data, for example, that trend over time is linear. GAMs reverse this process by letting the data inform the choice of functional form. In this article we review the problem that trend poses in SCDs, discuss how current SCD analytic methods approach trend, describe GAMs as a possible solution, suggest a GAM model testing procedure for examining the presence of trend in SCDs, present a small simulation to show the statistical properties of GAMs, and illustrate the procedure on 3 examples of different lengths. Results suggest that GAMs may be very useful both as a form of sensitivity analysis for checking the plausibility of assumptions about trend and as a primary data analysis strategy for testing treatment effects. We conclude with a discussion of some problems with GAMs and some future directions for research on the application of GAMs to SCDs. (c) 2015 APA, all rights reserved).

Usability and Visual Communication for Southern California Tsunami Evacuation Information: The importance of information design in disaster risk management

NASA Astrophysics Data System (ADS)

Jaenichen, C.; Schandler, S.; Wells, M.; Danielsen, T.

2015-12-01

Evacuation behavior, including participation and response, is rarely an individual and isolated process and the outcomes are usually systemic. Ineffective evacuation information can easily attribute to delayed evacuation response. Delays increase demands on already extended emergency personal, increase the likelihood of traffic congestion, and can cause harm to self and property. From an information design perspective, addressing issues in cognitive recall and emergency psychology, this case study examines evacuation messaging including written, audio, and visual presentation of information, and describes the application of design principles and role of visual communication for Southern California tsunami evacuation outreach. The niche of this project is the inclusion of cognitive processing as the driving influence when making formal design decisions and measurable data from a 4-year cognitive recall study to support the solution. Image included shows a tsunami evacaution map before and after the redesign.

Patent Information Use in Engineering Technology Design: An Analysis of Student Work

ERIC Educational Resources Information Center

Phillips, Margaret; Zwicky, Dave

2017-01-01

How might engineering technology students make use of patent information in the engineering design process? Librarians analyzed team project reports and personal reflections created by students in an undergraduate mechanical engineering technology design course, revealing that the students used patents to consider the patentability of their ideas,…

Fact Sheets and Additional information Regarding the 2012 Particulate Matter (PM) National Ambient Air Quality Standards (NAAQS)

EPA Pesticide Factsheets

Find tools for particulate matter, maps of nonattainment areas, an overview of the proposal, and information on designations, monitoring and permitting requirements and a presentation on the 2012 PM NAAQS revision.

A Virtual Information-Action Workspace for Command and Control

NASA Astrophysics Data System (ADS)

Lintern, Gavan; Naikar, Neelam

2002-10-01

Information overload has become a critical challenge within military Command and Control. However, the problem is not so much one of too much information but of abundant information that is poorly organized and poorly represented. In addition, the capabilities to test the effects of decisions before they are implemented and to monitor the progress of events after a decision is implemented are primitive. A virtual information-action workspace could be designed to resolve these issues. The design of such a space would require a detailed understanding of the specific information needed to support decision making in Command and Control. That information can be obtained with the use of knowledge acquisition and knowledge representation tools from the field of applied cognitive psychology. In addition, it will be necessary to integrate forms for perception and action into a virtual space that will support access to the information and that will provide means for testing and implementing decisions. This paper presents a rationale for a virtual information-action workspace and outlines an approach to its design.

Brainstorming Design for Health: Helping Patients Utilize Patient-Generated Information on the Web

PubMed Central

Huh, Jina; Hartzler, Andrea; Munson, Sean; Anderson, Nick; Edwards, Kelly; Gore, John L.; McDonald, David; O’Leary, Jim; Parker, Andrea; Streat, Derek; Yetisgen-Yildiz, Meliha; Pratt, Wanda; Ackerman, Mark S.

2013-01-01

Researchers and practitioners show increasing sinterest in utilizing patient-generated information on the Web. Although the HCI and CSCW communities have provided many exciting opportunities for exploring new ideas and building broad agenda in health, few venues offer a platform for interdisciplinary and collaborative brainstorming about design challenges and opportunities in this space. The goal of this workshop is to provide participants with opportunities to interact with stakeholders from diverse backgrounds and practices—researchers, practitioners, designers, programmers, and ethnographers—and together generate tangible design outcomes that utilize patient-generated information on the Web. Through small multidisciplinary group work, we will provide participants with new collaboration opportunities, understanding of the state of the art, inspiration for future work, and ideally avenues for continuing to develop research and design ideas generated at the workshop. PMID:24499843

76 FR 5857 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-02

... Act. The list of additional designees is as follows: 1. KHARROUBI, Ali Mohamed (a.k.a. KHAROUBI, Ali; a.k.a. ``KAROBY, Ali''), c/o SOLMAR, Lebanon; c/o ELLISSA HOLDING, Lebanon; c/o ELLISSA GROUP SA...

76 FR 68459 - Designation of a Class of Employees for Addition to the Special Exposure Cohort

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... designate a class of employees from W.R. Grace and Company in Curtis Bay, Maryland, as an addition to the... by W.R. Grace and Company in Curtis Bay, Maryland, for the operational period from May 1, 1956...

The AMPATH Nutritional Information System: Designing a Food Distribution Electronic Record System in Rural Kenya

PubMed Central

Lim, Jason LitJeh; Yih, Yuehwern; Gichunge, Catherine; Tierney, William M.; Le, Tung H.; Zhang, Jun; Lawley, Mark A.; Petersen, Tomeka J.; Mamlin, Joseph J.

2009-01-01

Objective The AMPATH program is a leading initiative in rural Kenya providing healthcare services to combat HIV. Malnutrition and food insecurity are common among AMPATH patients and the Nutritional Information System (NIS) was designed, with cross-functional collaboration between engineering and medical communities, as a comprehensive electronic system to record and assist in effective food distribution in a region with poor infrastructure. Design The NIS was designed modularly to support the urgent need of a system for the growing food distribution program. The system manages the ordering, storage, packing, shipping, and distribution of fresh produce from AMPATH farms and dry food supplements from the World Food Programme (WFP) and U.S. Agency for International Development (USAID) based on nutritionists' prescriptions for food supplements. Additionally, the system also records details of food distributed to support future studies. Measurements Patients fed weekly, patient visits per month. Results With inception of the NIS, the AMPATH food distribution program was able to support 30,000 persons fed weekly, up from 2,000 persons. Patient visits per month also saw a marked increase. Conclusion The NIS' modular design and frequent, effective interactions between developers and users has positively affected the design, implementation, support, and modifications of the NIS. It demonstrates the success of collaboration between engineering and medical communities, and more importantly the feasibility for technology readily available in a modern country to contribute to healthcare delivery in developing countries like Kenya and other parts of sub-Saharan Africa. PMID:19717795

Information Retrieval System Design Issues in a Microcomputer-Based Relational DBMS Environment.

ERIC Educational Resources Information Center

Wolfram, Dietmar

1992-01-01

Outlines the file structure requirements for a microcomputer-based information retrieval system using FoxPro, a relational database management system (DBMS). Issues relating to the design and implementation of such systems are discussed, and two possible designs are examined in terms of space economy and practicality of implementation. (15…

78 FR 9997 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-12

... the President to impose sanctions against significant foreign narcotics traffickers and their... controlled by significant foreign narcotics traffickers as identified by the President. In addition, the..., Rio Grande, Zacatecas 98400, Mexico; Matamoros, Tamaulipas, Mexico; Rio Grande, Zacatecas, Mexico; DOB...

Design and evaluation of an onboard computer-based information system for aircraft

NASA Technical Reports Server (NTRS)

Rouse, S. H.; Rouse, W. B.; Hammer, J. M.

1982-01-01

Information seeking by human operators of technical systems is considered. Types of information and forms of presentation are discussed and important issues reviewed. This broad discussion provides a framework within which flight management is considered. The design of an onboard computer-based information system for aircraft is discussed. The aiding possibilities of a computer-based system are emphasized. Results of an experimental evaluation of a prototype system are presented. It is concluded that a computer-based information system can substantially lessen the frequency of human errors.

D-OPTIMAL EXPERIMENTAL DESIGNS TO TEST FOR DEPARTURE FROM ADDITIVITY IN A FIXED-RATIO MIXTURE RAY.

EPA Science Inventory

Humans are exposed to mixtures of environmental compounds. A regulatory assumption is that the mixtures of chemicals act in an additive manner. However, this assumption requires experimental validation. Traditional experimental designs (full factorial) require a large number of e...

Applying the Ottawa Charter to inform health promotion programme design.

PubMed

Fry, Denise; Zask, Avigdor

2017-10-01

There is evidence of a correlation between adoption of the Ottawa Charter's framework of five action areas and health promotion programme effectiveness, but the Charter's framework has not been as fully implemented as hoped, nor is generally used by formal programme design models. In response, we aimed to translate the Charter's framework into a method to inform programme design. Our resulting design process uses detailed definitions of the Charter's action areas and evidence of predicted effectiveness to prompt greater consideration and use of the Charter's framework. We piloted the process by applying it to the design of four programmes of the Healthy Children's Initiative in New South Wales, Australia; refined the criteria via consensus; and made consensus decisions on the extent to which programme designs reflected the Charter's framework. The design process has broad potential applicability to health promotion programmes; facilitating greater use of the Ottawa Charter framework, which evidence indicates can increase programme effectiveness. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

76 FR 25407 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

... INFORMATION CONTACT: Assistant Director, Compliance Outreach & Implementation, Office of Foreign Assets... their organizations on a worldwide basis with the objective of denying their businesses and agents... of the Central Intelligence Agency, the Director of the Federal Bureau of Investigation, the...

Instructional Design and Professional Informal Learning: Practices, Tensions, and Ironies

ERIC Educational Resources Information Center

Yanchar, Stephen C.; Hawkley, Melissa N.

2015-01-01

This qualitative study explored the nature of informal learning in professional instructional designers' everyday work activities. Based on intensive interviews with six full-time practitioners, and using a hermeneutic form of data analysis, this study produced seven themes concerning the practices, tensions, and ironies associated with this…

Debunking the Librarian "Gene": Designing Online Information Literacy Instruction for Incoming Library Science Students