Sample records for additional information contact

  1. 77 FR 12903 - 60-Day Notice of Proposed Information Collection: DS-158, Contact Information and Work History...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-02

    ..., Contact Information and Work History for Nonimmigrant Visa Applicant ACTION: Notice of request for public... with the Paperwork Reduction Act of 1995. Title of Information Collection: Contact Information and Work... FURTHER INFORMATION CONTACT: Direct requests for additional information regarding the collection listed in...

  2. Antiwear Additive Mechanisms in Sliding Contacts

    NASA Technical Reports Server (NTRS)

    Baldwin, B. A.

    1984-01-01

    The possible mechanisms associated with wear in a sliding contact and how an oil and antiwear additive can mitigate wear or prevent catastropic seizure of the contacting parts was examined. The various load and temperature regimes are examined and the mechanisms which are predominant under these conditions are determined. The critical mechanism(s) depend on the test parameters, particularly load and temperature, although sliding speed is also a factor. Different ways to improve the efficiency of antiwear additives are suggested.

  3. 76 FR 80887 - Proposed Information Collection; Comment Request; Export Trading Companies Contact Facilitation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-27

    ... Request; Export Trading Companies Contact Facilitation Services AGENCY: International Trade [email protected] ). FOR FURTHER INFORMATION CONTACT: Requests for additional information or copies of the... facilitate contact between producers of exportable goods and services, and firms offering export trade...

  4. 78 FR 58608 - Proposed Collection; Comment Request for the EFTPS Primary Contact Information Change Form

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-24

    ... EFTPS Primary Contact Information Change Form AGENCY: Internal Revenue Service (IRS), Treasury. ACTION..., the IRS is soliciting comments concerning the EFTPS Primary Contact Information Change Form. DATES... Constitution Avenue NW., Washington, DC 20224. FOR FURTHER INFORMATION CONTACT: Requests for additional...

  5. 75 FR 61245 - Proposed Collection; Comment Request for the EFTPS Primary Contact Information Change Form

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-04

    ... EFTPS Primary Contact Information Change Form AGENCY: Internal Revenue Service (IRS), Treasury. ACTION..., the IRS is soliciting comments concerning the EFTPS Primary Contact Information Change Form. DATES... Constitution Avenue, NW., Washington, DC 20224. FOR FURTHER INFORMATION CONTACT: Requests for additional...

  6. 2 CFR 225.55 - Information contact.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false Information contact. 225.55 Section 225.55... STATE, LOCAL, AND INDIAN TRIBAL GOVERNMENTS (OMB CIRCULAR A-87) § 225.55 Information contact. Further information concerning this part may be obtained by contacting the Office of Federal Financial Management...

  7. 2 CFR 230.50 - Information contact.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false Information contact. 230.50 Section 230.50 Grants and Agreements OFFICE OF MANAGEMENT AND BUDGET CIRCULARS AND GUIDANCE Reserved COST PRINCIPLES FOR NON-PROFIT ORGANIZATIONS (OMB CIRCULAR A-122) § 230.50 Information contact. Further information...

  8. 5 CFR 2600.102 - Contact information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 3 2013-01-01 2013-01-01 false Contact information. 2600.102 Section... AND FUNCTIONS OF THE OFFICE OF GOVERNMENT ETHICS § 2600.102 Contact information. (a) Address. The.... OGE does not have any regional offices. (b) Web site. Information about OGE and its role in the...

  9. 78 FR 14549 - National Contact Center; Information Collection; National Contact Center Customer Evaluation Survey

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-06

    ...] National Contact Center; Information Collection; National Contact Center Customer Evaluation Survey AGENCY: Contact Center Services, Federal Citizen Information Center, Office of Citizen Services and Innovative... National Contact Center customer evaluation surveys. In this request, the previously approved surveys have...

  10. 76 FR 16857 - Proposed Information Collection (Request for Contact Information); Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-25

    ... (Request for Contact Information); Comment Request AGENCY: Veterans Benefits Administration, Department of... response to the notice. This notice solicits comments on information needed to obtain contact information... viewed online through FDMS. FOR FURTHER INFORMATION CONTACT: Nancy J. Kessinger at (202) 461-9769 or FAX...

  11. Program Contacts and Mailing/Courier Information

    EPA Pesticide Factsheets

    This page provides the contact information for the staff at EPA responsible for the different sections of the Review of New Chemicals program, including contacts for PMN Prenotice and Exemptions and the Central Data Exchange program.

  12. Thermally stable ohmic contacts to n-type GaAs. VII. Addition of Ge or Si to NiInW ohmic contacts

    NASA Astrophysics Data System (ADS)

    Murakami, Masanori; Price, W. H.; Norcott, M.; Hallali, P.-E.

    1990-09-01

    The effects of Si or Ge addition to NiInW ohmic contacts on their electrical behavior were studied, where the samples were prepared by evaporating Ni(Si) or Ni(Ge) pellets with In and W and annealed by a rapid thermal annealing method. An addition of Si affected the contact resistances of NiInW contacts: the resistances decreased with increasing the Si concentrations in the Ni(Si) pellets and the lowest value of ˜0.1 Ω mm was obtained in the contact prepared with the Ni-5 at. % Si pellets after annealing at temperatures around 800 °C. The contact resistances did not deteriorate during isothermal annealing at 400 °C for more than 100 h, far exceeding process requirements for self-aligned GaAs metal-semiconductor field-effect-transistor devices. In addition, the contacts were compatible with TiAlCu interconnects which have been widely used in the current Si process. Furthermore, the addition of Si to the NiInW contacts eliminated an annealing step for activation of implanted dopants and low resistance (˜0.2 Ω mm) contacts were fabricated for the first time by a ``one-step'' anneal. In contrast, an addition of Ge to the NiInW contacts did not significantly reduce the contact resistances.

  13. 47 CFR 25.171 - Contact information reporting requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... SERVICES SATELLITE COMMUNICATIONS Applications and Licenses Reporting Requirements for Space Station Operators § 25.171 Contact information reporting requirements. If contact information filed in space station... station's current authorization file. The operator must file the updated information within 10 days. [79...

  14. 76 FR 33031 - Agency Information Collection (Request for Contact Information) Activity Under OMB Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-07

    ... for Contact Information) Activity Under OMB Review AGENCY: Veterans Benefits Administration.... Please refer to ``OMB Control No. 2900-0660'' in any correspondence. FOR FURTHER INFORMATION CONTACT... refer to ``OMB Control No. 2900-0660.'' SUPPLEMENTARY INFORMATION: Title: Request for Contact...

  15. 75 FR 68608 - Information Collection; Request for Authorization of Additional Classification and Rate, Standard...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-08

    ... Authorization of Additional Classification and Rate, Standard Form 1444 AGENCY: Department of Defense (DOD... of Additional Classification and Rate, Standard Form 1444. DATES: Comments may be submitted on or.../or business confidential information provided. FOR FURTHER INFORMATION CONTACT: Mr. Ernest Woodson...

  16. Combining Physicochemical and Evolutionary Information for Protein Contact Prediction

    PubMed Central

    Schneider, Michael; Brock, Oliver

    2014-01-01

    We introduce a novel contact prediction method that achieves high prediction accuracy by combining evolutionary and physicochemical information about native contacts. We obtain evolutionary information from multiple-sequence alignments and physicochemical information from predicted ab initio protein structures. These structures represent low-energy states in an energy landscape and thus capture the physicochemical information encoded in the energy function. Such low-energy structures are likely to contain native contacts, even if their overall fold is not native. To differentiate native from non-native contacts in those structures, we develop a graph-based representation of the structural context of contacts. We then use this representation to train an support vector machine classifier to identify most likely native contacts in otherwise non-native structures. The resulting contact predictions are highly accurate. As a result of combining two sources of information—evolutionary and physicochemical—we maintain prediction accuracy even when only few sequence homologs are present. We show that the predicted contacts help to improve ab initio structure prediction. A web service is available at http://compbio.robotics.tu-berlin.de/epc-map/. PMID:25338092

  17. 2 CFR 220.45 - Information contact.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false Information contact. 220.45 Section 220.45 Grants and Agreements OFFICE OF MANAGEMENT AND BUDGET CIRCULARS AND GUIDANCE Reserved COST PRINCIPLES FOR... part may be obtained by contacting the Office of Federal Financial Management, Office of Management and...

  18. 76 FR 51125 - Additional Identifying Information Associated With Persons Whose Property and Interests in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-17

    ... Transnational Criminal Organizations.'' FOR FURTHER INFORMATION CONTACT: Assistant Director, Sanctions... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Additional Identifying Information... 13581of July 24, 2011, ``Blocking Property of Transnational Criminal Organizations.'' AGENCY: Office of...

  19. 32 CFR 1700.3 - Contact for general information and requests.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Officer c/o Director, Information Management Office, Washington, DC 20511 by mail or by facsimile at (703... 32 National Defense 6 2014-07-01 2014-07-01 false Contact for general information and requests... INFORMATION ACT § 1700.3 Contact for general information and requests. For general information on this Part...

  20. 32 CFR 1700.3 - Contact for general information and requests.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Officer c/o Director, Information Management Office, Washington, DC 20511 by mail or by facsimile at (703... 32 National Defense 6 2012-07-01 2012-07-01 false Contact for general information and requests... INFORMATION ACT § 1700.3 Contact for general information and requests. For general information on this Part...

  1. 32 CFR 1700.3 - Contact for general information and requests.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Officer c/o Director, Information Management Office, Washington, DC 20511 by mail or by facsimile at (703... 32 National Defense 6 2010-07-01 2010-07-01 false Contact for general information and requests... INFORMATION ACT § 1700.3 Contact for general information and requests. For general information on this Part...

  2. 32 CFR 1700.3 - Contact for general information and requests.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Officer c/o Director, Information Management Office, Washington, DC 20511 by mail or by facsimile at (703... 32 National Defense 6 2013-07-01 2013-07-01 false Contact for general information and requests... INFORMATION ACT § 1700.3 Contact for general information and requests. For general information on this Part...

  3. Hand eczema and occupational contact allergies in healthcare workers with a focus on rubber additives.

    PubMed

    Hamnerius, Nils; Svedman, Cecilia; Bergendorff, Ola; Björk, Jonas; Bruze, Magnus; Engfeldt, Malin; Pontén, Ann

    2018-06-20

    Hand eczema (HE) in healthcare workers (HCWs) is common. Besides wet work, healthcare work also implies exposure to contact allergens. To assess HE and contact allergy related to occupational exposures in HCWs. In a cross-sectional study, 311 HCWs with HE within the preceding 12 months and a control group of 114 HCWs without HE were investigated with the baseline series and a special patch test series based on substances found in the gloves, soaps, alcoholic hand disinfectants and hand creams provided at the hospitals. Contact allergy to rubber additives was significantly more common in HCWs with HE (6%) than in HCWs without HE (1%, P = .02). The corresponding percentages for fragrances were 11% and 3%, respectively (P = .004). Occupational HE was found in 193 of 311 (62%) HCWs. Of these, 22 of 193 (11%) had occupational allergic contact dermatitis, including 17 with glove-related rubber contact allergy. Contact allergy to diphenylguanidine was as common as contact allergy to thiurams. Occupational contact allergy to rubber additives was significantly associated with sick-leave related to HE. Contact allergy to rubber additives in medical gloves is the most common cause of occupational allergic contact dermatitis in HCWs. Aimed patch testing with relevant rubber additives is mandatory when HE in HCWs is investigated. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. 77 FR 40692 - 30-Day Notice of Proposed Information Collection: DS-158, Contact Information and Work History...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-10

    ..., Contact Information and Work History for Nonimmigrant Visa Applicant ACTION: Notice of request for public... approval in accordance with the Paperwork Reduction Act of 1995. Title of Information Collection: Contact... for Department of State. FOR FURTHER INFORMATION CONTACT: You may obtain copies of the proposed...

  5. 21 CFR 170.101 - Information in a premarket notification for a food contact substance (FCN).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Information in a premarket notification for a food contact substance (FCN). 170.101 Section 170.101 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD ADDITIVES Premarket Notifications § 170.101 Information...

  6. 78 FR 77119 - Proposed Information Collection Request; Comment Request; Regulation of Fuels and Fuel Additives...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-20

    ... Collection Request; Comment Request; Regulation of Fuels and Fuel Additives: 2011 Renewable Fuel Standards... collection request (ICR), ``Regulation of Fuels and Fuel Additives: 2011 Renewable Fuel Standards--Petition... whose disclosure is restricted by statute. FOR FURTHER INFORMATION CONTACT: Geanetta Heard, Fuels...

  7. Perception of time to contact of slow- and fast-moving objects using monocular and binocular motion information.

    PubMed

    Fath, Aaron J; Lind, Mats; Bingham, Geoffrey P

    2018-04-17

    The role of the monocular-flow-based optical variable τ in the perception of the time to contact of approaching objects has been well-studied. There are additional contributions from binocular sources of information, such as changes in disparity over time (CDOT), but these are less understood. We conducted an experiment to determine whether an object's velocity affects which source is most effective for perceiving time to contact. We presented participants with stimuli that simulated two approaching squares. During approach the squares disappeared, and participants indicated which square would have contacted them first. Approach was specified by (a) only disparity-based information, (b) only monocular flow, or (c) all sources of information in normal viewing conditions. As expected, participants were more accurate at judging fast objects when only monocular flow was available than when only CDOT was. In contrast, participants were more accurate judging slow objects with only CDOT than with only monocular flow. For both ranges of velocity, the condition with both information sources yielded performance equivalent to the better of the single-source conditions. These results show that different sources of motion information are used to perceive time to contact and play different roles in allowing for stable perception across a variety of conditions.

  8. 21 CFR 170.101 - Information in a premarket notification for a food contact substance (FCN).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Information in a premarket notification for a food contact substance (FCN). 170.101 Section 170.101 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES...

  9. 21 CFR 170.101 - Information in a premarket notification for a food contact substance (FCN).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Information in a premarket notification for a food contact substance (FCN). 170.101 Section 170.101 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES...

  10. 21 CFR 170.101 - Information in a premarket notification for a food contact substance (FCN).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Information in a premarket notification for a food contact substance (FCN). 170.101 Section 170.101 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES...

  11. 21 CFR 170.101 - Information in a premarket notification for a food contact substance (FCN).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Information in a premarket notification for a food contact substance (FCN). 170.101 Section 170.101 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES...

  12. Combining Multiple Forms Of Visual Information To Specify Contact Relations In Spatial Layout

    NASA Astrophysics Data System (ADS)

    Sedgwick, Hal A.

    1990-03-01

    An expert system, called Layout2, has been described, which models a subset of available visual information for spatial layout. The system is used to examine detailed interactions between multiple, partially redundant forms of information in an environment-centered geometrical model of an environment obeying certain rather general constraints. This paper discusses the extension of Layout2 to include generalized contact relations between surfaces. In an environment-centered model, the representation of viewer-centered distance is replaced by the representation of environmental location. This location information is propagated through the representation of the environment by a network of contact relations between contiguous surfaces. Perspective information interacts with other forms of information to specify these contact relations. The experimental study of human perception of contact relations in extended spatial layouts is also discussed. Differences between human results and Layout2 results reveal limitations in the human ability to register available information; they also point to the existence of certain forms of information not yet formalized in Layout2.

  13. 78 FR 23898 - Notice of Request for a New Information Collection (Accredited Laboratory Contact Update Form)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-23

    ... Request for a New Information Collection (Accredited Laboratory Contact Update Form) AGENCY: Food Safety... compilation of updated contact information for Accredited Laboratories. DATES: Comments on this notice must be... FURTHER INFORMATION CONTACT: Contact John O'Connell, Paperwork Reduction Act Coordinator, Food Safety and...

  14. Contact allergy in the cleaning industry: analysis of contact allergy surveillance data of the Information Network of Departments of Dermatology.

    PubMed

    Liskowsky, Joanna; Geier, Johannes; Bauer, Andrea

    2011-09-01

    Occupational contact allergy is a common problem in the cleaning industry. To identify the most frequent occupation-associated allergens and time trends in contact allergy in female cleaners. We analysed the patch test data concerning 803 female cleaners, who were evaluated for occupational contact dermatitis in 45 dermatological departments contributing to the Information Network of Departments of Dermatology (IVDK) from 1996 to 2009. Female patients, except cleaners, with occupational dermatitis (n = 14494) and female controls without occupational dermatitis (n = 64736) patch tested during this time period formed the control groups. One hundred and fifty-six (19.4%) cleaners had past or present atopic dermatitis. Six hundred and fifty-five (81.6%) cleaners suffered from occupational hand dermatitis. Allergic contact dermatitis was diagnosed in 249 (31%) of the cleaners. As compared with the control group without occupational dermatitis, female cleaners were significantly more often sensitized to occupationally relevant allergens such as rubber additives, especially thiurams [11.6%, 95% confidence interval (CI) 9.1-14.1 vs. 1.5%, 95% CI 1.4-1.6], zinc diethyldithiocarbamate (3.4%, 95% CI 2.1-4.7 vs. 0.4, 95% CI 0.3-0.4), and mercaptobenzothiazole (1.8, 95% CI 0.7-2.9 vs. 0.5, 95% CI 0.4-0.6), as well as formaldehyde (3.4, 95% CI 2.0-4.7 vs. 1.4%, 95% CI 1.3-1.5). No differences were seen in patterns of sensitization to occupational allergens in younger (≤40 years of age) and older (>40 years of age) female cleaners. Formaldehyde and rubber additives such as thiurams, zinc diethyldithiocarbamate and mercaptobenzothiazole are occupationally relevant allergens in female cleaners. Prevention strategies are needed to address the problem. © 2011 John Wiley & Sons A/S.

  15. 32 CFR 1701.3 - Contact for general information and requests.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... information and requests. Privacy Act requests and appeals and inquiries regarding this subpart or about ODNI's Privacy Act program must be submitted in writing to the Director, Information Management Office (D... 32 National Defense 6 2014-07-01 2014-07-01 false Contact for general information and requests...

  16. 32 CFR 1701.3 - Contact for general information and requests.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... information and requests. Privacy Act requests and appeals and inquiries regarding this subpart or about ODNI's Privacy Act program must be submitted in writing to the Director, Information Management Office (D... 32 National Defense 6 2011-07-01 2011-07-01 false Contact for general information and requests...

  17. 32 CFR 1701.3 - Contact for general information and requests.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... information and requests. Privacy Act requests and appeals and inquiries regarding this subpart or about ODNI's Privacy Act program must be submitted in writing to the Director, Information Management Office (D... 32 National Defense 6 2013-07-01 2013-07-01 false Contact for general information and requests...

  18. 32 CFR 1701.3 - Contact for general information and requests.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... information and requests. Privacy Act requests and appeals and inquiries regarding this subpart or about ODNI's Privacy Act program must be submitted in writing to the Director, Information Management Office (D... 32 National Defense 6 2012-07-01 2012-07-01 false Contact for general information and requests...

  19. 32 CFR 1701.3 - Contact for general information and requests.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... information and requests. Privacy Act requests and appeals and inquiries regarding this subpart or about ODNI's Privacy Act program must be submitted in writing to the Director, Information Management Office (D... 32 National Defense 6 2010-07-01 2010-07-01 false Contact for general information and requests...

  20. 10 CFR 810.14 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The... activity to submit additional information. ...

  1. 21 CFR 170.102 - Confidentiality of information in a premarket notification for a food contact substance (FCN).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Confidentiality of information in a premarket notification for a food contact substance (FCN). 170.102 Section 170.102 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD ADDITIVES Premarket Notifications § 170...

  2. 47 CFR 25.111 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 2 2013-10-01 2013-10-01 false Additional information. 25.111 Section 25.111... Applications and Licenses General Application Filing Requirements § 25.111 Additional information. (a) The Commission may request from any party at any time additional information concerning any application, or any...

  3. 47 CFR 25.111 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 2 2012-10-01 2012-10-01 false Additional information. 25.111 Section 25.111... Applications and Licenses General Application Filing Requirements § 25.111 Additional information. (a) The Commission may request from any party at any time additional information concerning any application, or any...

  4. 47 CFR 25.111 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Additional information. 25.111 Section 25.111... Applications and Licenses General Application Filing Requirements § 25.111 Additional information. (a) The Commission may request from any party at any time additional information concerning any application, or any...

  5. 17 CFR 230.408 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 2 2013-04-01 2013-04-01 false Additional information. 230... RULES AND REGULATIONS, SECURITIES ACT OF 1933 General Requirements § 230.408 Additional information. (a) In addition to the information expressly required to be included in a registration statement, there...

  6. Contact Us About Managing the Quality of Environmental Information

    EPA Pesticide Factsheets

    The contact us form for the EPA Quality Program regarding quality management activities for all environmental data collection and environmental technology programs performed by or for the Agency and the EPA Information Quality Guidelines.

  7. 10 CFR 725.13 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Additional information. 725.13 Section 725.13 Energy DEPARTMENT OF ENERGY PERMITS FOR ACCESS TO RESTRICTED DATA Applications § 725.13 Additional information. The... and before the termination of the permit, require additional information in order to enable the Chief...

  8. 28 CFR 80.7 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Additional information. 80.7 Section 80.7... § 80.7 Additional information. If an issuer's or domestic concern's submission does not contain all of the information required by § 80.6, the Department of Justice may request whatever additional...

  9. 18 CFR 33.10 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... § 33.10 Additional information. The Director of the Office of Energy Market Regulation, or his designee, may, by letter, require the applicant to submit additional information as is needed for analysis of an... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Additional information...

  10. 18 CFR 33.10 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... § 33.10 Additional information. The Director of the Office of Energy Market Regulation, or his designee, may, by letter, require the applicant to submit additional information as is needed for analysis of an... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Additional information...

  11. 18 CFR 33.10 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... § 33.10 Additional information. The Director of the Office of Energy Market Regulation, or his designee, may, by letter, require the applicant to submit additional information as is needed for analysis of an... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Additional information...

  12. 34 CFR 75.231 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 1 2014-07-01 2014-07-01 false Additional information. 75.231 Section 75.231 Education... Make A Grant § 75.231 Additional information. After selecting an application for funding, the Secretary may require the applicant to submit additional information. (Authority: 20 U.S.C. 1221e-3 and 3474) ...

  13. 76 FR 4408 - Service Contract Inventory and Corresponding Point of Contact Information Per Section 703 of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-25

    ... Corresponding Point of Contact Information Per Section 703 of Division C of the Fiscal Year (FY) 2010... contact information per Section 743 of Division C of the FY 2010 Consolidated Appropriations Act, Public Law 111-117. FOR FURTHER INFORMATION CONTACT: Dennis Wilhite, Director, Office of Budget Execution and...

  14. Information content of contact-pattern representations and predictability of epidemic outbreaks

    PubMed Central

    Holme, Petter

    2015-01-01

    To understand the contact patterns of a population—who is in contact with whom, and when the contacts happen—is crucial for modeling outbreaks of infectious disease. Traditional theoretical epidemiology assumes that any individual can meet any with equal probability. A more modern approach, network epidemiology, assumes people are connected into a static network over which the disease spreads. Newer yet, temporal network epidemiology, includes the time in the contact representations. In this paper, we investigate the effect of these successive inclusions of more information. Using empirical proximity data, we study both outbreak sizes from unknown sources, and from known states of ongoing outbreaks. In the first case, there are large differences going from a fully mixed simulation to a network, and from a network to a temporal network. In the second case, differences are smaller. We interpret these observations in terms of the temporal network structure of the data sets. For example, a fast overturn of nodes and links seem to make the temporal information more important. PMID:26403504

  15. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest, consistent...

  16. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest, consistent...

  17. 18 CFR 33.10 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional information. 33.10 Section 33.10 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... § 33.10 Additional information. The Director of the Office of Energy Market Regulation, or his designee...

  18. 10 CFR 810.14 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically authorized...

  19. 10 CFR 810.14 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically authorized...

  20. 10 CFR 810.14 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically authorized...

  1. 10 CFR 810.14 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically authorized...

  2. Contact-Allergic Reactions to Cosmetics

    PubMed Central

    Goossens, An

    2011-01-01

    Contact-allergic reactions to cosmetics may be delayed-type reactions such as allergic and photo-allergic contact dermatitis, and more exceptionally also immediate-type reactions, that is, contact urticaria. Fragrances and preservative agents are the most important contact allergens, but reactions also occur to category-specific products such as hair dyes and other hair-care products, nail cosmetics, sunscreens, as well as to antioxidants, vehicles, emulsifiers, and, in fact, any possible cosmetic ingredient. Patch and prick testing to detect the respective culprits remains the golden standard for diagnosis, although additional tests might be useful as well. Once the specific allergens are identified, the patients should be informed of which products can be safely used in the future. PMID:21461388

  3. 16 CFR § 1102.16 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest, consistent...

  4. 43 CFR 3430.4-2 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Additional information. 3430.4-2 Section... Leases § 3430.4-2 Additional information. (a) If the applicant for a preference right lease has submitted timely, some, but not all of the information required in § 3430.4-1 of this title, the authorized officer...

  5. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE (Eff. Jan. 10, 2011) Content Requirements... notices, the CPSC shall include in the Database any additional information it determines to be in the...

  6. How should initial fit inform soft contact lens prescribing.

    PubMed

    Boychev, Nikolay; Laughton, Deborah S; Bharwani, Gulshan; Ghuman, Hafsa; Wolffsohn, James S

    2016-06-01

    To investigate how initial HEMA and silicone-hydrogel (SiHy) contact lens fit on insertion, which informs prescribing decisions, reflect end of day fit. Thirty participants (aged 22.9±4.9 years) were fitted contralaterally with HEMA and SiHy contact lenses. Corneal topography and tear break-up time were assessed pre-lens wear. Centration, lag, post-blink movement during up-gaze and push-up recovery speed were recorded after 5,10,20min and 8h of contact lens wear by a digital slit-lamp biomicroscope camera, along with reported comfort. Lens fit metrics were analysed using bespoke software. Comfort and centration were similar with the HEMA and SiHy lenses (p>0.05), but comfort decreased with time (p<0.01) whereas centration remained stable (F=0.036, p=0.991). Movement-on-blink and lag were greater with the HEMA than the SiHy lens (p<0.01), but movement-on-blink decreased with time after insertion (F=22.423, p<0.001) whereas lag remained stable (F=1.967, p=0.129). Push-up recovery speed was similar with the HEMA and the SiHy lens 5-20min after insertion (p>0.05), but was slower with SiHy after 8h wear (p=0.016). Lens movement on blink and push-up recovery speed was predictive of the movement after 8h of wear after 10-20min SiHy wear, but after 5 to 20min of HEMA lens wear. A HEMA or SiHy contact lens with poor movement on blink/push-up after at least 10min after insertion should be rejected. Copyright © 2015 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  7. Amino acid alphabet reduction preserves fold information contained in contact interactions in proteins.

    PubMed

    Solis, Armando D

    2015-12-01

    To reduce complexity, understand generalized rules of protein folding, and facilitate de novo protein design, the 20-letter amino acid alphabet is commonly reduced to a smaller alphabet by clustering amino acids based on some measure of similarity. In this work, we seek the optimal alphabet that preserves as much of the structural information found in long-range (contact) interactions among amino acids in natively-folded proteins. We employ the Information Maximization Device, based on information theory, to partition the amino acids into well-defined clusters. Numbering from 2 to 19 groups, these optimal clusters of amino acids, while generated automatically, embody well-known properties of amino acids such as hydrophobicity/polarity, charge, size, and aromaticity, and are demonstrated to maintain the discriminative power of long-range interactions with minimal loss of mutual information. Our measurements suggest that reduced alphabets (of less than 10) are able to capture virtually all of the information residing in native contacts and may be sufficient for fold recognition, as demonstrated by extensive threading tests. In an expansive survey of the literature, we observe that alphabets derived from various approaches-including those derived from physicochemical intuition, local structure considerations, and sequence alignments of remote homologs-fare consistently well in preserving contact interaction information, highlighting a convergence in the various factors thought to be relevant to the folding code. Moreover, we find that alphabets commonly used in experimental protein design are nearly optimal and are largely coherent with observations that have arisen in this work. © 2015 Wiley Periodicals, Inc.

  8. Establishment of a reference collection of additives and an analytical handbook of reference data to support enforcement of EU regulations on food contact plastics.

    PubMed

    van Lierop, B; Castle, L; Feigenbaum, A; Ehlert, K; Boenke, A

    1998-10-01

    A collection has been made of additives that are required as analytical standards for enforcement of European Union legislation on food contact plastics. The 100 additives have been characterized by mass spectrometry, infra-red spectroscopy and proton nuclear magnetic resonance spectroscopy to provide reference spectra. Gas chromatographic retention times have been recorded to facilitate identification by retention index. This information has been further supplemented by physico-chemical data. Finally, chromatographic methods have been used to indicate the presence of any impurities in the commercial chemicals. Samples of the reference substances are available on request and the collection of spectra and other information will be made available in printed format and on-line through the Internet. This paper gives an overview of the work done to establish the reference collection and the spectral atlas, which together will assist enforcement laboratories in the characterization of plastics and the selection of analytical methods for additives that may migrate.

  9. 49 CFR Appendix A to Part 24 - Additional Information

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Additional Information A Appendix A to Part 24... Information This appendix provides additional information to explain the intent of certain provisions of this... additional information is gathered. If a decision is later made to permanently relocate such persons, those...

  10. 10 CFR 1.3 - Sources of additional information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Sources of additional information. 1.3 Section 1.3 Energy NUCLEAR REGULATORY COMMISSION STATEMENT OF ORGANIZATION AND GENERAL INFORMATION Introduction § 1.3 Sources of additional information. (a) A statement of the NRC's organization, policies, procedures...

  11. Students with Disabilities Who Contact the School Counselor for College Information

    ERIC Educational Resources Information Center

    Rainer, Paula L.

    2012-01-01

    The purpose of this study was to examine the characteristics of students with disabilities who contact the school counselor for college information. "Self-determination" was the theoretical framework guiding this study. Self-determination refers to a student's ability to (a) act autonomously, (b) identify goals, (c) engage in problem…

  12. Region 9 Tribal Grant Program - Project Officer and Tribal Contact Information Map Service

    EPA Pesticide Factsheets

    This compilation of geospatial data is for the purpose of managing and communicating information about current EPA project officers, tribal contacts, and tribal grants, both internally and with external stakeholders.

  13. 24 CFR Appendix A to Part 15 - Location Information for HUD FOIA Reading Rooms and Contact Information for Regional Counsel

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Location Information for HUD FOIA Reading Rooms and Contact Information for Regional Counsel A Appendix A to Part 15 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development PUBLIC ACCESS TO HUD RECORDS UNDER THE FREEDOM OF INFORMATION ACT AN...

  14. 24 CFR Appendix A to Part 15 - Location Information for HUD FOIA Reading Rooms and Contact Information for Regional Counsel

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Location Information for HUD FOIA Reading Rooms and Contact Information for Regional Counsel A Appendix A to Part 15 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development PUBLIC ACCESS TO HUD RECORDS UNDER THE FREEDOM OF INFORMATION ACT AN...

  15. 24 CFR Appendix A to Part 15 - Location Information for HUD FOIA Reading Rooms and Contact Information for Regional Counsel

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Location Information for HUD FOIA Reading Rooms and Contact Information for Regional Counsel A Appendix A to Part 15 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development PUBLIC ACCESS TO HUD RECORDS UNDER THE FREEDOM OF INFORMATION ACT AN...

  16. 24 CFR Appendix A to Part 15 - Location Information for HUD FOIA Reading Rooms and Contact Information for Regional Counsel

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Location Information for HUD FOIA Reading Rooms and Contact Information for Regional Counsel A Appendix A to Part 15 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development PUBLIC ACCESS TO HUD RECORDS UNDER THE FREEDOM OF INFORMATION ACT AN...

  17. The (in)stability of 21st century orthopedic patient contact information and its implications on clinical research: a cross-sectional study

    PubMed Central

    London, Daniel A; Stepan, Jeffrey G; Goldfarb, Charles A; Boyer, Martin I; Calfee, Ryan P

    2016-01-01

    Background In clinical research, minimizing patients lost to follow-up is essential for data validity. Researchers can employ better methodology to prevent patient loss. We examined how orthopedic surgery patients’ contact information changes over time to optimize data collection for long-term outcomes research. Methods Patients presenting to orthopedic outpatient clinics completed questionnaires regarding methods of contact: home phone, cell phone, mailing address, and e-mail address. They reported currently available methods of contact, if they changed in the past five and ten years, and when they changed. Differences in the rates of change amongst methods were assessed via Fisher exact tests. Whether participants changed any of their contact information in the past five and ten years was determined via multivariate modeling, controlling for demographic variables. Results Among 152 patients, 51% changed at least one form of contact information within 5 years, and 66% changed at least one form within 10 years. The rate of change for each contact method was similar over five (15-28%) and ten years (26-41%). One patient changed all 4 methods of contact within the past five years, and seven within the past ten years. Females and younger patients were more likely to change some type of contact information. Conclusions The type of contact information least likely to change over five to ten years is influenced by demographic factors such as sex and age, with females and younger participants more likely to change some aspect of their contact information. Collecting all contact methods appears necessary to minimize patients lost to follow-up, especially as technological norms evolve. PMID:28359191

  18. The (in)stability of 21st century orthopedic patient contact information and its implications on clinical research: A cross-sectional study.

    PubMed

    London, Daniel A; Stepan, Jeffrey G; Goldfarb, Charles A; Boyer, Martin I; Calfee, Ryan P

    2017-04-01

    In clinical research, minimizing patients lost to follow-up is essential for data validity. Researchers can employ better methodology to prevent patient loss. We examined how orthopedic surgery patients' contact information changes over time to optimize data collection for long-term outcomes research. Patients presenting to orthopedic outpatient clinics completed questionnaires regarding methods of contact: home phone, cell phone, mailing address, and e-mail address. They reported currently available methods of contact, if they changed in the past 5 and 10 years, and when they changed. Differences in the rates of change among methods were assessed via Fisher's exact tests. Whether participants changed any of their contact information in the past 5 and 10 years was determined via multivariate modeling, controlling for demographic variables. Among 152 patients, 51% changed at least one form of contact information within 5 years, and 66% changed at least one form within 10 years. The rate of change for each contact method was similar over 5 (15%-28%) and 10 years (26%-41%). One patient changed all four methods of contact within the past 5 years and seven within the past 10 years. Females and younger patients were more likely to change some type of contact information. The type of contact information least likely to change over 5-10 years is influenced by demographic factors such as sex and age, with females and younger participants more likely to change some aspect of their contact information. Collecting all contact methods appears necessary to minimize patients lost to follow-up, especially as technological norms evolve.

  19. Contact urticaria from nickel and plastic additives (butylhydroxytoluene, oleylamide).

    PubMed

    Osmundsen, P E

    1980-12-01

    In two patients urticaria was elicited by contact with nickel-containing objects. Chamber-prick test with nickel sulfate 2.5% in pet. evoked a strong urticarial reaction in both patients. In one of the patients contact with plastic articles also provoked urticaria. A 20-min patch test with several articles of plastic (polyethylene and PVC) and with butylhydroxytoluene (BHT) 1% in ethanol elicited urticarial reactions. BHT is used as an antioxidant in plastic. Furthermore, open patch test with oleylamide (amide of oleic acid) 0.1% in ethanol elicited a strong urticarial reaction in 20 min. This chemical is used as a slipping agent in plastic.

  20. Optimal contact definition for reconstruction of contact maps.

    PubMed

    Duarte, Jose M; Sathyapriya, Rajagopal; Stehr, Henning; Filippis, Ioannis; Lappe, Michael

    2010-05-27

    Contact maps have been extensively used as a simplified representation of protein structures. They capture most important features of a protein's fold, being preferred by a number of researchers for the description and study of protein structures. Inspired by the model's simplicity many groups have dedicated a considerable amount of effort towards contact prediction as a proxy for protein structure prediction. However a contact map's biological interest is subject to the availability of reliable methods for the 3-dimensional reconstruction of the structure. We use an implementation of the well-known distance geometry protocol to build realistic protein 3-dimensional models from contact maps, performing an extensive exploration of many of the parameters involved in the reconstruction process. We try to address the questions: a) to what accuracy does a contact map represent its corresponding 3D structure, b) what is the best contact map representation with regard to reconstructability and c) what is the effect of partial or inaccurate contact information on the 3D structure recovery. Our results suggest that contact maps derived from the application of a distance cutoff of 9 to 11A around the Cbeta atoms constitute the most accurate representation of the 3D structure. The reconstruction process does not provide a single solution to the problem but rather an ensemble of conformations that are within 2A RMSD of the crystal structure and with lower values for the pairwise average ensemble RMSD. Interestingly it is still possible to recover a structure with partial contact information, although wrong contacts can lead to dramatic loss in reconstruction fidelity. Thus contact maps represent a valid approximation to the structures with an accuracy comparable to that of experimental methods. The optimal contact definitions constitute key guidelines for methods based on contact maps such as structure prediction through contacts and structural alignments based on maximum

  1. 40 CFR 141.154 - Required additional health information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

  2. 40 CFR 141.154 - Required additional health information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

  3. 40 CFR 141.154 - Required additional health information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

  4. 40 CFR 141.154 - Required additional health information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

  5. Tribological study on rapeseed oil with nano-additives in close contact sliding situation

    NASA Astrophysics Data System (ADS)

    Gupta, Rajeev Nayan; Harsha, A. P.; Singh, Sagar

    2018-02-01

    The present work deals with the tribological evaluation of three types of nano-additives, i.e., copper oxide (CuO; ≈ 151.2 nm), cerium oxide (CeO2; ≈ 80 nm) and polytetrafluoroethylene (PTFE; ≈ 90.4 nm) with rapeseed oil under steel-steel sliding contacts. The nano-additives concentrations in the base oil were 0.1, 0.25 and 0.5% w/v for the lubricant formulation. Further, the rapeseed oil was also epoxidized by a chemical method and the tribological behavior was compared with the base oil (unmodified oil) at similar nano-additives concentrations. The ASTM standards were followed for the study of wear preventive and extreme-pressure analysis of nanolubricants, and it was carried out using four-ball tester. In the antiwear test, CeO2 and PTFE nano-additives have shown the significant reduction in the wear scar diameter at the concentration of 0.1% w/v. In the extreme-pressure test, 0.5% w/v concentration was optimum for oxide nanoparticles; however, PTFE nanoparticles did not show positive effect with both the base oils. Different characterization techniques were employed to confirm the oil modification and for the study of the worn surfaces.

  6. 24 CFR Appendix A to Part 15 - Location Information for HUD FOIA Reading Rooms and Contact Information for Regional Counsel

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Location Information for HUD FOIA Reading Rooms and Contact Information for Regional Counsel A Appendix A to Part 15 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development PUBLIC ACCESS TO HUD RECORDS...

  7. 47 CFR 1.10017 - How can I submit additional information?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false How can I submit additional information? 1... International Bureau Filing System § 1.10017 How can I submit additional information? In response to an official request for information from the International Bureau, you can submit additional information...

  8. Optimal contact definition for reconstruction of Contact Maps

    PubMed Central

    2010-01-01

    Background Contact maps have been extensively used as a simplified representation of protein structures. They capture most important features of a protein's fold, being preferred by a number of researchers for the description and study of protein structures. Inspired by the model's simplicity many groups have dedicated a considerable amount of effort towards contact prediction as a proxy for protein structure prediction. However a contact map's biological interest is subject to the availability of reliable methods for the 3-dimensional reconstruction of the structure. Results We use an implementation of the well-known distance geometry protocol to build realistic protein 3-dimensional models from contact maps, performing an extensive exploration of many of the parameters involved in the reconstruction process. We try to address the questions: a) to what accuracy does a contact map represent its corresponding 3D structure, b) what is the best contact map representation with regard to reconstructability and c) what is the effect of partial or inaccurate contact information on the 3D structure recovery. Our results suggest that contact maps derived from the application of a distance cutoff of 9 to 11Å around the Cβ atoms constitute the most accurate representation of the 3D structure. The reconstruction process does not provide a single solution to the problem but rather an ensemble of conformations that are within 2Å RMSD of the crystal structure and with lower values for the pairwise average ensemble RMSD. Interestingly it is still possible to recover a structure with partial contact information, although wrong contacts can lead to dramatic loss in reconstruction fidelity. Conclusions Thus contact maps represent a valid approximation to the structures with an accuracy comparable to that of experimental methods. The optimal contact definitions constitute key guidelines for methods based on contact maps such as structure prediction through contacts and structural

  9. 15 CFR 970.2601 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES Miscellaneous § 970.2601 Additional information. Any United States citizen filing notice under § 970.2402 or § 970.2501 of this part...

  10. Legal responsibilities when fitting minors with contact lenses.

    PubMed

    Harris, M G

    2000-02-01

    Practitioners must understand their legal responsibilities in fitting minors with contact lenses, which include informed consent, contractual obligations, and the Statute of Limitations. Minors are children and teenagers who have not yet reached voting age in their state--generally 18 years of age. Informed consent requires permission from the patient before a practitioner performs any treatment. For these young people, this consent generally can only be given by a parent or legal guardian. Minors can repudiate contracts made with them; therefore, the contractual obligation to pay for a contact lens fitting should be established with a parent or legal guardian. In most states, minors have additional time beyond the usual Statute of Limitations to bring a lawsuit. If practitioners recognize their legal responsibilities in caring for these special patients, fitting youngsters with contact lenses can be a rewarding part of practice.

  11. 47 CFR 25.111 - Additional information and ITU cost recovery.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 2 2014-10-01 2014-10-01 false Additional information and ITU cost recovery....111 Additional information and ITU cost recovery. (a) The Commission may request from any party at any time additional information concerning any application, or any other submission or pleading regarding...

  12. Novel color additive for chlorine disinfectants corrects deficiencies in spray surface coverage and wet-contact time and checks for correct chlorine concentration.

    PubMed

    Tyan, Kevin; Jin, Katherine; Kang, Jason; Kyle, Aaron M

    2018-04-18

    Bleach sprays suffer from poor surface coverage, dry out before reaching proper contact time, and can be inadvertently over-diluted to ineffective concentrations. Highlight ® , a novel color additive for bleach that fades to indicate elapsed contact time, maintained >99.9% surface coverage over full contact time and checked for correct chlorine concentration. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  13. Contact Us about Asbestos

    EPA Pesticide Factsheets

    How to contact EPA for more information on asbestos, including state and regional contacts, EPA’s Asbestos Abatement/Management Ombudsman and the Toxic Substances Control Act (TSCA) Assistance Information Service (TSCA Hotline).

  14. 78 FR 53733 - Procurement List Additions and Deletions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-30

    ... INFORMATION CONTACT: Barry S. Lineback, Telephone: (703) 603-7740, Fax: (703) 603-0655, or email [email protected] . SUPPLEMENTARY INFORMATION: Additions On 7/8/2013 (78 FR 40727-40728) and 7/12/2013 (78 FR... military commissaries and exchanges as aggregated by the Defense Commissary Agency. Towel, Hazardous...

  15. Layered Double Hydroxide Nanoplatelets with Excellent Tribological Properties under High Contact Pressure as Water-Based Lubricant Additives

    PubMed Central

    Wang, Hongdong; Liu, Yuhong; Chen, Zhe; Wu, Bibo; Xu, Sailong; Luo, Jianbin

    2016-01-01

    High efficient and sustainable utilization of water-based lubricant is essential for saving energy. In this paper, a kind of layered double hydroxide (LDH) nanoplatelets is synthesized and well dispersed in water due to the surface modification with oleylamine. The excellent tribological properties of the oleylamine-modified Ni-Al LDH (NiAl-LDH/OAm) nanoplatelets as water-based lubricant additives are evaluated by the tribological tests in an aqueous environment. The modified LDH nanoplatelets are found to not only reduce the friction but also enhance the wear resistance, compared with the water-based cutting fluid and lubricants containing other particle additives. By adding 0.5 wt% LDH nanoplatelets, under 1.5 GPa initial contact pressure, the friction coefficient, scar diameter, depth and width of the wear track dramatically decrease by 83.1%, 43.2%, 88.5% and 59.5%, respectively. It is considered that the sufficiently small size and the excellent dispersion of NiAl-LDH/OAm nanoplatelets in water are the key factors, so as to make them enter the contact area, form a lubricating film and prevent direct collision of asperity peaks. Our investigations demonstrate that the LDH nanoplatelet as a water-based lubricant additive has a great potential value in industrial application. PMID:26951794

  16. Layered Double Hydroxide Nanoplatelets with Excellent Tribological Properties under High Contact Pressure as Water-Based Lubricant Additives.

    PubMed

    Wang, Hongdong; Liu, Yuhong; Chen, Zhe; Wu, Bibo; Xu, Sailong; Luo, Jianbin

    2016-03-08

    High efficient and sustainable utilization of water-based lubricant is essential for saving energy. In this paper, a kind of layered double hydroxide (LDH) nanoplatelets is synthesized and well dispersed in water due to the surface modification with oleylamine. The excellent tribological properties of the oleylamine-modified Ni-Al LDH (NiAl-LDH/OAm) nanoplatelets as water-based lubricant additives are evaluated by the tribological tests in an aqueous environment. The modified LDH nanoplatelets are found to not only reduce the friction but also enhance the wear resistance, compared with the water-based cutting fluid and lubricants containing other particle additives. By adding 0.5 wt% LDH nanoplatelets, under 1.5 GPa initial contact pressure, the friction coefficient, scar diameter, depth and width of the wear track dramatically decrease by 83.1%, 43.2%, 88.5% and 59.5%, respectively. It is considered that the sufficiently small size and the excellent dispersion of NiAl-LDH/OAm nanoplatelets in water are the key factors, so as to make them enter the contact area, form a lubricating film and prevent direct collision of asperity peaks. Our investigations demonstrate that the LDH nanoplatelet as a water-based lubricant additive has a great potential value in industrial application.

  17. Experiences in extraction of contact parameters from process-evaluation test-structures

    NASA Technical Reports Server (NTRS)

    Lieneweg, Udo

    1988-01-01

    Six-terminal-contact test structures are introduced for characterizing ohmic contacts between a metal and a heavily doped semiconductor layer. Specifically, the six-terminal test structure supplies the additional information needed in order to calculate the transmission length and eventual corrections to the characteristic resistance per unit width due to finite contact length. The essential feature of this test structure is a square contact with four taps in the lower (semiconductor) layer. Every other one of these taps is used for current injection ('front'). From the voltage drop at the opposite tap and the side taps, the 'end' resistance and the 'side' resistances are calculated. The test structures are shown to give valuable information complementary to the common front resistance measurements. The interfacial resistivity is obtained directly after proper correction for flange effects.

  18. 24 CFR 1710.116 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Additional information. 1710.116 Section 1710.116 Housing and Urban Development Regulations Relating to Housing and Urban Development... URBAN DEVELOPMENT (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements...

  19. 24 CFR 1710.116 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Additional information. 1710.116 Section 1710.116 Housing and Urban Development Regulations Relating to Housing and Urban Development... URBAN DEVELOPMENT (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements...

  20. 24 CFR 1710.116 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Additional information. 1710.116 Section 1710.116 Housing and Urban Development Regulations Relating to Housing and Urban Development... URBAN DEVELOPMENT (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements...

  1. 24 CFR 1710.116 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Additional information. 1710.116 Section 1710.116 Housing and Urban Development Regulations Relating to Housing and Urban Development... URBAN DEVELOPMENT (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements...

  2. Informing disease models with temporal and spatial contact structure among GPS-collared individuals in wild populations.

    PubMed

    Williams, David M; Dechen Quinn, Amy C; Porter, William F

    2014-01-01

    Contacts between hosts are essential for transmission of many infectious agents. Understanding how contacts, and thus transmission rates, occur in space and time is critical to effectively responding to disease outbreaks in free-ranging animal populations. Contacts between animals in the wild are often difficult to observe or measure directly. Instead, one must infer contacts from metrics such as proximity in space and time. Our objective was to examine how contacts between white-tailed deer (Odocoileus virginianus) vary in space and among seasons. We used GPS movement data from 71 deer in central New York State to quantify potential direct contacts between deer and indirect overlap in space use across time and space. Daily probabilities of direct contact decreased from winter (0.05-0.14), to low levels post-parturition through summer (0.00-0.02), and increased during the rut to winter levels. The cumulative distribution for the spatial structure of direct and indirect contact probabilities around a hypothetical point of occurrence increased rapidly with distance for deer pairs separated by 1,000 m-7,000 m. Ninety-five percent of the probabilities of direct contact occurred among deer pairs within 8,500 m of one another, and 99% within 10,900 m. Probabilities of indirect contact accumulated across greater spatial extents: 95% at 11,900 m and 99% at 49,000 m. Contacts were spatially consistent across seasons, indicating that although contact rates differ seasonally, they occur proportionally across similar landscape extents. Distributions of contact probabilities across space can inform management decisions for assessing risk and allocating resources in response.

  3. 18 CFR 5.21 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional information. 5.21 Section 5.21 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS § 5.21...

  4. 18 CFR 5.21 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Additional information. 5.21 Section 5.21 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS § 5.21...

  5. Informing Disease Models with Temporal and Spatial Contact Structure among GPS-Collared Individuals in Wild Populations

    PubMed Central

    Williams, David M.; Dechen Quinn, Amy C.; Porter, William F.

    2014-01-01

    Contacts between hosts are essential for transmission of many infectious agents. Understanding how contacts, and thus transmission rates, occur in space and time is critical to effectively responding to disease outbreaks in free-ranging animal populations. Contacts between animals in the wild are often difficult to observe or measure directly. Instead, one must infer contacts from metrics such as proximity in space and time. Our objective was to examine how contacts between white-tailed deer (Odocoileus virginianus) vary in space and among seasons. We used GPS movement data from 71 deer in central New York State to quantify potential direct contacts between deer and indirect overlap in space use across time and space. Daily probabilities of direct contact decreased from winter (0.05–0.14), to low levels post-parturition through summer (0.00–0.02), and increased during the rut to winter levels. The cumulative distribution for the spatial structure of direct and indirect contact probabilities around a hypothetical point of occurrence increased rapidly with distance for deer pairs separated by 1,000 m – 7,000 m. Ninety-five percent of the probabilities of direct contact occurred among deer pairs within 8,500 m of one another, and 99% within 10,900 m. Probabilities of indirect contact accumulated across greater spatial extents: 95% at 11,900 m and 99% at 49,000 m. Contacts were spatially consistent across seasons, indicating that although contact rates differ seasonally, they occur proportionally across similar landscape extents. Distributions of contact probabilities across space can inform management decisions for assessing risk and allocating resources in response. PMID:24409293

  6. Prioritized Contact Transport Stream

    NASA Technical Reports Server (NTRS)

    Hunt, Walter Lee, Jr. (Inventor)

    2015-01-01

    A detection process, contact recognition process, classification process, and identification process are applied to raw sensor data to produce an identified contact record set containing one or more identified contact records. A prioritization process is applied to the identified contact record set to assign a contact priority to each contact record in the identified contact record set. Data are removed from the contact records in the identified contact record set based on the contact priorities assigned to those contact records. A first contact stream is produced from the resulting contact records. The first contact stream is streamed in a contact transport stream. The contact transport stream may include and stream additional contact streams. The contact transport stream may be varied dynamically over time based on parameters such as available bandwidth, contact priority, presence/absence of contacts, system state, and configuration parameters.

  7. Contact angle and local wetting at contact line.

    PubMed

    Li, Ri; Shan, Yanguang

    2012-11-06

    This theoretical study was motivated by recent experiments and theoretical work that had suggested the dependence of the static contact angle on the local wetting at the triple-phase contact line. We revisit this topic because the static contact angle as a local wetting parameter is still not widely understood and clearly known. To further clarify the relationship of the static contact angle with wetting, two approaches are applied to derive a general equation for the static contact angle of a droplet on a composite surface composed of heterogeneous components. A global approach based on the free surface energy of a thermodynamic system containing the droplet and solid surface shows the static contact angle as a function of local surface chemistry and local wetting state at the contact line. A local approach, in which only local forces acting on the contact line are considered, results in the same equation. The fact that the local approach agrees with the global approach further demonstrates the static contact angle as a local wetting parameter. Additionally, the study also suggests that the wetting described by the Wenzel and Cassie equations is also the local wetting of the contact line rather than the global wetting of the droplet.

  8. Cryo-EM Data Are Superior to Contact and Interface Information in Integrative Modeling.

    PubMed

    de Vries, Sjoerd J; Chauvot de Beauchêne, Isaure; Schindler, Christina E M; Zacharias, Martin

    2016-02-23

    Protein-protein interactions carry out a large variety of essential cellular processes. Cryo-electron microscopy (cryo-EM) is a powerful technique for the modeling of protein-protein interactions at a wide range of resolutions, and recent developments have caused a revolution in the field. At low resolution, cryo-EM maps can drive integrative modeling of the interaction, assembling existing structures into the map. Other experimental techniques can provide information on the interface or on the contacts between the monomers in the complex. This inevitably raises the question regarding which type of data is best suited to drive integrative modeling approaches. Systematic comparison of the prediction accuracy and specificity of the different integrative modeling paradigms is unavailable to date. Here, we compare EM-driven, interface-driven, and contact-driven integrative modeling paradigms. Models were generated for the protein docking benchmark using the ATTRACT docking engine and evaluated using the CAPRI two-star criterion. At 20 Å resolution, EM-driven modeling achieved a success rate of 100%, outperforming the other paradigms even with perfect interface and contact information. Therefore, even very low resolution cryo-EM data is superior in predicting heterodimeric and heterotrimeric protein assemblies. Our study demonstrates that a force field is not necessary, cryo-EM data alone is sufficient to accurately guide the monomers into place. The resulting rigid models successfully identify regions of conformational change, opening up perspectives for targeted flexible remodeling. Copyright © 2016 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  9. Cryo-EM Data Are Superior to Contact and Interface Information in Integrative Modeling

    PubMed Central

    de Vries, Sjoerd J.; Chauvot de Beauchêne, Isaure; Schindler, Christina E.M.; Zacharias, Martin

    2016-01-01

    Protein-protein interactions carry out a large variety of essential cellular processes. Cryo-electron microscopy (cryo-EM) is a powerful technique for the modeling of protein-protein interactions at a wide range of resolutions, and recent developments have caused a revolution in the field. At low resolution, cryo-EM maps can drive integrative modeling of the interaction, assembling existing structures into the map. Other experimental techniques can provide information on the interface or on the contacts between the monomers in the complex. This inevitably raises the question regarding which type of data is best suited to drive integrative modeling approaches. Systematic comparison of the prediction accuracy and specificity of the different integrative modeling paradigms is unavailable to date. Here, we compare EM-driven, interface-driven, and contact-driven integrative modeling paradigms. Models were generated for the protein docking benchmark using the ATTRACT docking engine and evaluated using the CAPRI two-star criterion. At 20 Å resolution, EM-driven modeling achieved a success rate of 100%, outperforming the other paradigms even with perfect interface and contact information. Therefore, even very low resolution cryo-EM data is superior in predicting heterodimeric and heterotrimeric protein assemblies. Our study demonstrates that a force field is not necessary, cryo-EM data alone is sufficient to accurately guide the monomers into place. The resulting rigid models successfully identify regions of conformational change, opening up perspectives for targeted flexible remodeling. PMID:26846888

  10. Contact symmetries and Hamiltonian thermodynamics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bravetti, A., E-mail: bravetti@correo.nucleares.unam.mx; Lopez-Monsalvo, C.S., E-mail: cesar.slm@correo.nucleares.unam.mx; Nettel, F., E-mail: Francisco.Nettel@roma1.infn.it

    It has been shown that contact geometry is the proper framework underlying classical thermodynamics and that thermodynamic fluctuations are captured by an additional metric structure related to Fisher’s Information Matrix. In this work we analyse several unaddressed aspects about the application of contact and metric geometry to thermodynamics. We consider here the Thermodynamic Phase Space and start by investigating the role of gauge transformations and Legendre symmetries for metric contact manifolds and their significance in thermodynamics. Then we present a novel mathematical characterization of first order phase transitions as equilibrium processes on the Thermodynamic Phase Space for which the Legendremore » symmetry is broken. Moreover, we use contact Hamiltonian dynamics to represent thermodynamic processes in a way that resembles the classical Hamiltonian formulation of conservative mechanics and we show that the relevant Hamiltonian coincides with the irreversible entropy production along thermodynamic processes. Therefore, we use such property to give a geometric definition of thermodynamically admissible fluctuations according to the Second Law of thermodynamics. Finally, we show that the length of a curve describing a thermodynamic process measures its entropy production.« less

  11. 77 FR 66909 - Notification of Contact Information Change for the Benghazi Accountability Review Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-07

    ... DEPARTMENT OF STATE [Public Notice 8080] Notification of Contact Information Change for the Benghazi Accountability Review Board SUMMARY: On October 1, 2012, the Department of State announced the formation of the Benghazi Accountability Review Board (ARB) in the Federal Register (FR Doc. 2012-24504...

  12. 78 FR 44122 - Agency Information Collection Activities; Submission for OMB Review; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-23

    ... requirements contained in the Contact Lens Rule. That clearance expires on July 31, 2013 (OMB Control No. 3084... SUPPLEMENTARY INFORMATION section below. FOR FURTHER INFORMATION CONTACT: Requests for additional information or... (Bernstein) and (202) 326-2356 (McGregor). SUPPLEMENTARY INFORMATION: Title: Contact Lens Rule (Rule), 16 CFR...

  13. 78 FR 12271 - Wireline Competition Bureau Seeks Additional Comment In Connect America Cost Model Virtual Workshop

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-22

    ... Competition Bureau seeks public input on additional questions relating to modeling voice capability and Annual... submitting comments and additional information on the rulemaking process, see the SUPPLEMENTARY INFORMATION section of this document. FOR FURTHER INFORMATION CONTACT: Katie King, Wireline Competition Bureau at (202...

  14. 78 FR 7463 - Information Collection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-01

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [13-006] Information Collection AGENCY: National... information collections, as required by the Paperwork Reduction Act of 1995. DATES: All comments should be... FURTHER INFORMATION CONTACT: Requests for additional information or copies of the information collection...

  15. Endoplasmic Reticulum-Plasma Membrane Contacts Regulate Cellular Excitability.

    PubMed

    Dickson, Eamonn J

    2017-01-01

    Cells that have intrinsic electrical excitability utilize changes in membrane potential to communicate with neighboring cells and initiate cellular cascades. Excitable cells like neurons and myocytes have evolved highly specialized subcellular architectures to translate these electrical signals into cellular events. One such structural specialization is sarco-/endoplasmic reticulum-plasma membrane contact sites. These membrane contact sites are positioned by specific membrane-membrane tethering proteins and contain an ever-expanding list of additional proteins that organize information transfer across the junctional space (~ 15-25 nm distance) to shape membrane identity and control cellular excitability. In this chapter we discuss how contacts between the sarco-/endoplasmic reticulum and plasma membrane are essential for regulated excitation-contraction coupling in striated muscle and control of lipid-dependent ion channels.

  16. 78 FR 30303 - National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-22

    ...] National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation Survey AGENCY: Contact Center Services, Federal Citizen Information Center, Office of Citizen Services and... regarding the National Contact Center customer evaluation surveys. In this request, the previously approved...

  17. Reducing contact resistance in graphene devices through contact area patterning.

    PubMed

    Smith, Joshua T; Franklin, Aaron D; Farmer, Damon B; Dimitrakopoulos, Christos D

    2013-04-23

    Performance of graphene electronics is limited by contact resistance associated with the metal-graphene (M-G) interface, where unique transport challenges arise as carriers are injected from a 3D metal into a 2D-graphene sheet. In this work, enhanced carrier injection is experimentally achieved in graphene devices by forming cuts in the graphene within the contact regions. These cuts are oriented normal to the channel and facilitate bonding between the contact metal and carbon atoms at the graphene cut edges, reproducibly maximizing "edge-contacted" injection. Despite the reduction in M-G contact area caused by these cuts, we find that a 32% reduction in contact resistance results in Cu-contacted, two-terminal devices, while a 22% reduction is achieved for top-gated graphene transistors with Pd contacts as compared to conventionally fabricated devices. The crucial role of contact annealing to facilitate this improvement is also elucidated. This simple approach provides a reliable and reproducible means of lowering contact resistance in graphene devices to bolster performance. Importantly, this enhancement requires no additional processing steps.

  18. 76 FR 5375 - Submission for OMB Review; Request for Authorization of Additional Classification and Rate...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-31

    ... for Authorization of Additional Classification and Rate, Standard Form 1444 AGENCIES: Department of... Request for Authorization of Additional Classification and Rate, Standard Form 1444. A notice published in... personal and/or business confidential information provided. FOR FURTHER INFORMATION CONTACT: Ms. Clare...

  19. 47 CFR 95.117 - Where to contact the FCC.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES General Mobile Radio Service (GMRS) § 95.117 Where to contact the FCC. Additional GMRS information...) FCC World Wide Web homepage: http://www.fcc.gov/wtb/prs. (c) In writing, to the FCC, Attention: GMRS...

  20. 10 CFR 52.158 - Contents of application; additional technical information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Contents of application; additional technical information... APPROVALS FOR NUCLEAR POWER PLANTS Manufacturing Licenses § 52.158 Contents of application; additional technical information. The application must contain: (a)(1) Inspections, tests, analyses, and acceptance...

  1. Contact Us about NREL | NREL

    Science.gov Websites

    Contact Us about NREL Contact Us about NREL Find mailing addresses, phone numbers, and contact -2157 202-488-2200 Phone Phone Numbers View a list of important phone numbers. Address book Contact a Staff Member at NREL Our searchable staff directory has contact information for staff. Questions

  2. 78 FR 7463 - Information Collection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-01

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [13-007] Information Collection AGENCY: National... information collections, as required by the Paperwork Reduction Act of 1995. DATES: All comments should be... 20546-0001. FOR FURTHER INFORMATION CONTACT: Requests for additional information or copies of the...

  3. 10 CFR 52.80 - Contents of applications; additional technical information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; additional technical information... APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical information. The application must contain: (a) The proposed inspections, tests, and analyses, including those...

  4. 28 CFR 540.65 - Release of information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.65 Release of information. (a) The Warden shall promptly make announcements stating the facts of unusual, newsworthy incidents to local news... additional information concerning an inmate by a representative of the news media is referred to the Public...

  5. 28 CFR 540.65 - Release of information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.65 Release of information. (a) The Warden shall promptly make announcements stating the facts of unusual, newsworthy incidents to local news... additional information concerning an inmate by a representative of the news media is referred to the Public...

  6. 28 CFR 540.65 - Release of information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.65 Release of information. (a) The Warden shall promptly make announcements stating the facts of unusual, newsworthy incidents to local news... additional information concerning an inmate by a representative of the news media is referred to the Public...

  7. 28 CFR 540.65 - Release of information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.65 Release of information. (a) The Warden shall promptly make announcements stating the facts of unusual, newsworthy incidents to local news... additional information concerning an inmate by a representative of the news media is referred to the Public...

  8. 28 CFR 540.65 - Release of information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.65 Release of information. (a) The Warden shall promptly make announcements stating the facts of unusual, newsworthy incidents to local news... additional information concerning an inmate by a representative of the news media is referred to the Public...

  9. 20 CFR 609.23 - Furnishing additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Furnishing additional information. 609.23 Section 609.23 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR UNEMPLOYMENT COMPENSATION FOR FEDERAL CIVILIAN EMPLOYEES Responsibilities of Federal Agencies § 609.23...

  10. NCI Contact Center

    Cancer.gov

    The NCI Contact Center (formerly the Cancer Information Service) provides accurate, up-to-date, and reliable information on cancer that is easy to understand. Trained information specialists provide personalized responses to a range of cancer questions.

  11. Modeling the influence of information on the coevolution of contact networks and the dynamics of infectious diseases

    NASA Astrophysics Data System (ADS)

    Zhang, Haifeng; Small, Michael; Fu, Xinchu; Sun, Guiquan; Wang, Binghong

    2012-09-01

    Outbreaks of infectious diseases may awaken the awareness of individuals, consequently, they may adjust their contact patterns according to the perceived risk from disease. In this paper, we assume that individuals make decisions on breaking or recovering links according to the information of diseases spreading which they have acquired. They will reduce some links when diseases are prevalent and have high risks; otherwise, they will recover some original links when the diseases are controlled or present minimal risk. Under such an assumption, we study the effects of information of diseases on the contact patterns within the population and on the dynamics of epidemics. By extensive simulations and theoretical analysis, we find that, due to the time-delayed information of diseases, both the density of the disease and the topology of the network vary with time in a periodic form. Our results indicate that the quality of information available to individuals can have an important effect on the spreading of infectious diseases and implications for related problems.

  12. Effect on signal-to-noise ratio of splitting the continuous contacts of cuff electrodes into smaller recording areas

    PubMed Central

    2013-01-01

    Background Cuff electrodes have been widely used chronically in different clinical applications. This neural interface has been dominantly used for nerve stimulation while interfering noise is the major issue when employed for recording purposes. Advancements have been made in rejecting extra-neural interference by using continuous ring contacts in tripolar topologies. Ring contacts provide an average of the neural activity, and thus reduce the information retrieved. Splitting these contacts into smaller recording areas could potentially increase the information content. In this study, we investigate the impact of such discretization on the Signal-to-Noise Ratio (SNR). The effect of contacts positioning and an additional short circuited pair of electrodes were also addressed. Methods Different recording configurations using ring, dot, and a mixed of both contacts were studied in vitro in a frog model. An interfering signal was induced in the medium to simulate myoelectric noise. The experimental setup was design in such a way that the only difference between recordings was the configuration used. The inter-session experimental differences were taken care of by a common configuration that allowed normalization between electrode designs. Results It was found that splitting all contacts into small recording areas had negative effects on noise rejection. However, if this is only applied to the central contact creating a mixed tripole configuration, a considerable and statistically significant improvement was observed. Moreover, the signal to noise ratio was equal or larger than what can be achieved with the best known configuration, namely the short circuited tripole. This suggests that for recording purposes, any tripole topology would benefit from splitting the central contact into one or more discrete contacts. Conclusions Our results showed that a mixed tripole configuration performs better than the configuration including only ring contacts. Therefore, splitting

  13. Bulbar conjunctival fluorescein staining in hydrogel contact lens wearers.

    PubMed

    Lakkis, C; Brennan, N A

    1996-07-01

    To evaluate the clinical usefulness of bulbar conjunctival staining in assessing hydrogel contact lens patients. Overall staining, as well as staining at five separate sites (limbal, nasal band, temporal band, superior, and inferior) was graded on an analog scale in 48 contact lens wearing subjects and 50 controls. The degree to which subjects experienced sensations of dryness, wateriness, itchiness, grittiness, and comfort was also assessed using analog scales. Some measure of conjunctival staining was noted in 98% of subjects, with contact lens wearers showing statistically significant greater staining than controls. Only 12% of controls showed staining of greater than grade 1 (equivalent), whereas 62% of contact lens wearers were above this level. Regression analysis showed that overall staining was a function of whether contact lenses were worn, the degree of dryness, and the amount of itchiness. Conjunctival fluorescein staining appears to serve some clinical usefulness as a composite indicator for certain factors and symptoms and, in addition, provides information which is unique for each individual.

  14. 43 CFR 3922.30 - Application-Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Application-Additional information. 3922.30 Section 3922.30 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR RANGE MANAGEMENT (4000) OIL SHALE LEASING Application...

  15. 43 CFR 3922.30 - Application-Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Application-Additional information. 3922.30 Section 3922.30 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) OIL SHALE LEASING Application...

  16. 43 CFR 3922.30 - Application-Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Application-Additional information. 3922.30 Section 3922.30 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) OIL SHALE LEASING Application...

  17. 43 CFR 3922.30 - Application-Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Application-Additional information. 3922.30 Section 3922.30 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) OIL SHALE LEASING Application...

  18. Enhancing Intergenerational Contact.

    ERIC Educational Resources Information Center

    Ralston, Penny A.; And Others

    This document is a curriculum module designed to assist secondary school home economic teachers in teaching students about aging. The three major purposes of this module are to provide data-based information on aging related to needs of students to enhance intergenerational contact; to facilitate the expansion of intergenerational contacts by…

  19. Time-to-contact estimation of accelerated stimuli is based on first-order information.

    PubMed

    Benguigui, Nicolas; Ripoll, Hubert; Broderick, Michael P

    2003-12-01

    The goal of this study was to test whether 1st-order information, which does not account for acceleration, is used (a) to estimate the time to contact (TTC) of an accelerated stimulus after the occlusion of a final part of its trajectory and (b) to indirectly intercept an accelerated stimulus with a thrown projectile. Both tasks require the production of an action on the basis of predictive information acquired before the arrival of the stimulus at the target and allow the experimenter to make quantitative predictions about the participants' use (or nonuse) of 1st-order information. The results show that participants do not use information about acceleration and that they commit errors that rely quantitatively on 1st-order information even when acceleration is psychophysically detectable. In the indirect interceptive task, action is planned about 200 ms before the initiation of the movement, at which time the 1st-order TTC attains a critical value. ((c) 2003 APA, all rights reserved)

  20. Discrimination against contact lens wearers.

    PubMed

    Blais, B R

    1998-10-01

    Employers' attitudes toward the use of contact lenses at work have become less discriminatory as lenses have improved and numerous studies have demonstrated their safety, provided that additional personal protective equipment is used when necessary. In 1994, the Occupational Safety and Health Administration published its relevant Standard (29 CFR 1910), stating that "contact lenses do not pose additional hazards to the wearer...". Accommodations required by wearers of contact lenses must comply with Title I of the Americans with Disabilities Act. However, many companies still oppose their use. The recently published policy of the American College of Occupational and Environmental Medicine and the American Academy of Ophthalmology on the use of contact lenses should lead to their wider acceptance. Elements of a corporate contact lens policy are outlined. International aspects are summarized as well.

  1. Solar cell with back side contacts

    DOEpatents

    Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J; Wanlass, Mark Woodbury; Clews, Peggy J

    2013-12-24

    A III-V solar cell is described herein that includes all back side contacts. Additionally, the positive and negative electrical contacts contact compoud semiconductor layers of the solar cell other than the absorbing layer of the solar cell. That is, the positive and negative electrical contacts contact passivating layers of the solar cell.

  2. 25 CFR 215.17 - Additional information required.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Additional information required. 215.17 Section 215.17 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING... application, must file one certified copy of articles of incorporation and, if a foreign corporation, evidence...

  3. 25 CFR 215.17 - Additional information required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... interested in lead and zinc mining leases, or land under the jurisdiction of the Quapaw Indian Agency, and... 25 Indians 1 2010-04-01 2010-04-01 false Additional information required. 215.17 Section 215.17 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING...

  4. Mitigation of epidemics in contact networks through optimal contact adaptation.

    PubMed

    Youssef, Mina; Scoglio, Caterina

    2013-08-01

    This paper presents an optimal control problem formulation to minimize the total number of infection cases during the spread of susceptible-infected-recovered SIR epidemics in contact networks. In the new approach, contact weighted are reduced among nodes and a global minimum contact level is preserved in the network. In addition, the infection cost and the cost associated with the contact reduction are linearly combined in a single objective function. Hence, the optimal control formulation addresses the tradeoff between minimization of total infection cases and minimization of contact weights reduction. Using Pontryagin theorem, the obtained solution is a unique candidate representing the dynamical weighted contact network. To find the near-optimal solution in a decentralized way, we propose two heuristics based on Bang-Bang control function and on a piecewise nonlinear control function, respectively. We perform extensive simulations to evaluate the two heuristics on different networks. Our results show that the piecewise nonlinear control function outperforms the well-known Bang-Bang control function in minimizing both the total number of infection cases and the reduction of contact weights. Finally, our results show awareness of the infection level at which the mitigation strategies are effectively applied to the contact weights.

  5. Contact resistance evolution of highly cycled, lightly loaded micro-contacts

    NASA Astrophysics Data System (ADS)

    Stilson, Christopher; Coutu, Ronald

    2014-03-01

    Reliable microelectromechanical systems (MEMS) switches are critical for developing high performance radio frequency circuits like phase shifters. Engineers have attempted to improve reliability and lifecycle performance using novel contact metals, unique mechanical designs and packaging. Various test fixtures including: MEMS devices, atomic force microscopes (AFM) and nanoindentors have been used to collect resistance and contact force data. AFM and nanoindentor test fixtures allow direct contact force measurements but are severely limited by low resonance sensors, and therefore low data collection rates. This paper reports the contact resistance evolution results and fabrication of thin film, sputtered and evaporated gold, micro-contacts dynamically tested up to 3kHz. The upper contact support structure consists of a gold surface micromachined, fix-fix beam designed with sufficient restoring force to overcome adhesion. The hemisphere-upper and planar-lower contacts are mated with a calibrated, external load resulting in approximately 100μN of contact force and are cycled in excess of 106 times or until failure. Contact resistance is measured, in-situ, using a cross-bar configuration and the entire apparatus is isolated from external vibration and housed in an enclosure to minimize contamination due to ambient environment. Additionally, contact cycling and data collection are automated using a computer and LabVIEW. Results include contact resistance measurements of 6 and 8 μm radius contact bumps and lifetime testing up to 323.6 million cycles.

  6. Contact Lens Solutions and Contact Lens Discomfort: Examining the Correlations Between Solution Components, Keratitis, and Contact Lens Discomfort.

    PubMed

    Kuc, Christopher J; Lebow, Kenneth A

    2018-06-13

    This article will examine the current literature, as it relates to contact lens discomfort (CLD) secondary to contact lens solutions. The reader will better understand the characteristics of contact lenses, as they uniquely interact with each type of contact lens solution and also gain a better comprehension of the components of contact lens solution such as preservatives, surfactants, and chelating agents, which may contribute to discomfort. By investigating corneal staining theory and the mechanisms that contribute to its presence, the reader will gain insight into this clinical finding, which relates to selection of contact lens solutions. The FDA standards for testing solutions and how this relates to contact lens keratitis will also be appraised in regards to current ISO recommendations. Finally, better selection of multipurpose contact lens solution (MPS) and hydrogen peroxide-based solutions for patients should be accessible to the clinician based on this review and preexisting clinical findings or diagnoses. A review of current published literature from peer reviewed journals and online journals was conducted to gain an understanding of contact lens solution's impact on contact lens discomfort. Many studies have been conducted comparing comfort between various types of contact lens solutions. It is challenging to decipher this information and apply it clinically when selecting solutions for patients. By comparing solution components, how contact lens solutions interact with different types of lenses, keratitis related to contact lenses, and preexisting ocular conditions, this review will improve a clinician's ability to eliminate CLD.

  7. Contact-assisted protein structure modeling by global optimization in CASP11.

    PubMed

    Joo, Keehyoung; Joung, InSuk; Cheng, Qianyi; Lee, Sung Jong; Lee, Jooyoung

    2016-09-01

    We have applied the conformational space annealing method to the contact-assisted protein structure modeling in CASP11. For Tp targets, where predicted residue-residue contact information was provided, the contact energy term in the form of the Lorentzian function was implemented together with the physical energy terms used in our template-free modeling of proteins. Although we observed some structural improvement of Tp models over the models predicted without the Tp information, the improvement was not substantial on average. This is partly due to the inaccuracy of the provided contact information, where only about 18% of it was correct. For Ts targets, where the information of ambiguous NOE (Nuclear Overhauser Effect) restraints was provided, we formulated the modeling in terms of the two-tier optimization problem, which covers: (1) the assignment of NOE peaks and (2) the three-dimensional (3D) model generation based on the assigned NOEs. Although solving the problem in a direct manner appears to be intractable at first glance, we demonstrate through CASP11 that remarkably accurate protein 3D modeling is possible by brute force optimization of a relevant energy function. For 19 Ts targets of the average size of 224 residues, generated protein models were of about 3.6 Å Cα atom accuracy. Even greater structural improvement was observed when additional Tc contact information was provided. For 20 out of the total 24 Tc targets, we were able to generate protein structures which were better than the best model from the rest of the CASP11 groups in terms of GDT-TS. Proteins 2016; 84(Suppl 1):189-199. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

  8. 12 CFR 335.801 - Inapplicable SEC regulations; FDIC substituted regulations; additional information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... For information and answers to technical questions or problems relating to the use of FDICconnect... regulations; additional information. 335.801 Section 335.801 Banks and Banking FEDERAL DEPOSIT INSURANCE... Inapplicable SEC regulations; FDIC substituted regulations; additional information. (a) Filing fees. Filing...

  9. Importance of tread inertia and damping on the tyre/road contact stiffness

    NASA Astrophysics Data System (ADS)

    Winroth, J.; Andersson, P. B. U.; Kropp, W.

    2014-10-01

    Predicting tyre/road interaction processes like roughness excitation, stick-slip, stick-snap, wear and traction requires detailed information about the road surface, the tyre dynamics and the local deformation of the tread at the interface. Aspects of inertia and damping when the tread is locally deformed are often neglected in many existing tyre/road interaction models. The objective of this paper is to study how the dynamic features of the tread affect contact forces and contact stiffness during local deformation. This is done by simulating the detailed contact between an elastic layer and a rough road surface using a previously developed numerical time domain contact model. Road roughness on length scales smaller than the discretisation scale is included by the addition of nonlinear contact springs between each pair of contact elements. The dynamic case, with an elastic layer impulse response extending in time, is compared with the case where the corresponding quasi-static response is used. Results highlight the difficulty of estimating a constant contact stiffness as it increases during the indentation process between the elastic layer and the rough road surface. The stiffness-indentation relation additionally depends on how rapidly the contact develops; a faster process gives a stiffer contact. Material properties like loss factor and density also alter the contact development. This work implies that dynamic properties of the local tread deformation may be of importance when simulating contact details during normal tyre/road interaction conditions. There are however indications that the significant effect of damping could approximately be included as an increased stiffness in a quasi-static tread model.

  10. 12 CFR 1272.7 - Examinations; requests for additional information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... information. 1272.7 Section 1272.7 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS NEW BUSINESS ACTIVITIES § 1272.7 Examinations; requests for additional information. (a) General... business activity, nothing in this part shall limit the right of the FHFA at any time to: (1) Request...

  11. 12 CFR 1272.7 - Examinations; requests for additional information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... information. 1272.7 Section 1272.7 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS NEW BUSINESS ACTIVITIES § 1272.7 Examinations; requests for additional information. (a) General... business activity, nothing in this part shall limit the right of the FHFA at any time to: (1) Request...

  12. 12 CFR 1272.7 - Examinations; requests for additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... information. 1272.7 Section 1272.7 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS NEW BUSINESS ACTIVITIES § 1272.7 Examinations; requests for additional information. (a) General... business activity, nothing in this part shall limit the right of the FHFA at any time to: (1) Request...

  13. When contact counts: Intergroup contact on business and intermarriage resistance in the Caucasus region.

    PubMed

    Gurrentz, Benjamin T; Finke, Roger

    2017-03-01

    Intergroup contact theory has been empirically supported in a variety of social contexts, but few samples have been drawn from rapidly developing nations undergoing severe political and sociocultural conflict. Using 2012 Caucasus Barometer data from the three nations of the South Caucasus - Armenia, Azerbaijan and Georgia - we test the effect of interreligious contact on various forms of out-group resistance in a region of the world that is both historically and presently marked with severe religious and ethnic conflict. Additionally, we take into account self-selection effects using propensity score matching. Results overwhelmingly support intergroup contact theory in all three countries, but objections toward intermarriage still remain high for treated groups. In addition, there exist significant differences based on the out-group studied, with the contact effects being the strongest for groups posing little religio-cultural or organized threat. Weaker contact effects, though, appear less related to threat and more contextual/out-group specific. Copyright © 2016 Elsevier Inc. All rights reserved.

  14. Using Contact Patterns to Inform HIV Interventions in Persons Who Inject Drugs in Northern Vietnam.

    PubMed

    Smith, M Kumi; Graham, Matthew; Latkin, Carl A; Go, Vivian L

    2018-05-01

    Population mixing patterns can greatly inform allocation of HIV prevention interventions such as treatment as prevention or preexposure prophylaxis. Characterizing contact patterns among subgroups can help identify the specific combinations of contact expected to result in the greatest number of new infections. Baseline data from an intervention to reduce HIV-related risk behaviors in male persons who inject drugs (PWID) in the Northern Vietnamese province of Thai Nguyen were used for the analysis. Egocentric network data were provided by PWID who reported any drug-injection equipment sharing in the previous 3 months. Age-dependent mixing was assessed to explore its epidemiological implications on risk of HIV transmission risk (among those HIV-infected) and HIV acquisition risk (among those not infected) in PWID. A total of 1139 PWID collectively reported 2070 equipment-sharing partnerships in the previous 3 months. Mixing by age identified the 30-34 and 35-39 years age groups as the groups from whom the largest number of new infections was transmitted, making them primary targets for treatment as prevention. Among the uninfected, 25-29, 30-35, and 35-39 years age groups had the highest HIV acquisition rate, making them the primary targets for preexposure prophylaxis. Collection and analysis of contact patterns in PWID is feasible and can greatly inform infectious disease dynamics and targeting of appropriate interventions. Results presented also provide much needed empirical data on mixing to improve mathematical models of disease transmission in this population.

  15. [News on occupational contact dermatitis].

    PubMed

    Crépy, Marie-Noëlle; Bensefa-Colas, Lynda

    2014-03-01

    Contact dermatitis--irritant contact dermatitis, allergic contact dermatitis and protein contact dermatitis--are the most common occupational skin diseases, most often localized to the hands. Contact urticaria is rarer The main occupational irritants are wet work, detergents and disinfectants, cutting oils, and solvents. The main occupational allergens are rubber additives, metals (chromium, nickel, cobalt), plastics (epoxy resins, acrylic), biocides and plants. Diagnosis is based on clinical examination, medical history and allergy testing. For a number of irritating or sensitizing agents, irritant or allergic dermatitis can be notified as occupational diseases. The two main prevention measures are reducing skin contact with irritants and complete avoidance of skin contact with offending allergens.

  16. Pectoral fin contact as a mechanism for social bonding among dolphins

    USGS Publications Warehouse

    Dudzinski, Kathleen; Ribic, Christine

    2017-01-01

    Bottlenose dolphins are large-brained social mammals residing in a fission-fusion society with relationships that are established and maintained over decades. We examined a decade-long data set of inter-individual pectoral fin contact exchanges to better understand how dolphins share information via tactile contact. Sex and age are significant factors in pectoral fin contact within non-kin dolphin dyads. Adult females shared more pectoral fin contacts with other adult females, while younger females showed no pattern of contact. Males shared more pectoral fin contacts with other males as juveniles and as adults, but showed no difference in the number of touches versus rubs as pectoral fin contacts with other males. Whether in the role of initiator as rubber or initiator as rubbee, male dolphins again preferred other males. These results support the notion that dolphins, especially male dolphins, might use pectoral fin contact as one tool in their repertoire for social bonding to establish, maintain and manage their inter-individual relationships. Additionally, it is also likely that the exchange of pectoral fin contact is developed and refined as individuals age, mature socially, and establish their place within a fission-fusion society.

  17. 76 FR 5207 - Agency Information Collection Activities: Reinstatement With Change of a Previously Approved...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-28

    ...: Comments Requested Action: 60-Day Notice of Information Collection Under Review: Police Public Contact... instrument with instructions or additional information, please contact Christine Eith, (202) 305-4559, Bureau... Contact Survey. (3) The agency form number, if any, and the applicable component of the Department...

  18. Genuine eye contact elicits self-referential processing.

    PubMed

    Hietanen, Jonne O; Hietanen, Jari K

    2017-05-01

    The effect of eye contact on self-awareness was investigated with implicit measures based on the use of first-person singular pronouns in sentences. The measures were proposed to tap into self-referential processing, that is, information processing associated with self-awareness. In addition, participants filled in a questionnaire measuring explicit self-awareness. In Experiment 1, the stimulus was a video clip showing another person and, in Experiment 2, the stimulus was a live person. In both experiments, participants were divided into two groups and presented with the stimulus person either making eye contact or gazing downward, depending on the group assignment. During the task, the gaze stimulus was presented before each trial of the pronoun-selection task. Eye contact was found to increase the use of first-person pronouns, but only when participants were facing a real person, not when they were looking at a video of a person. No difference in self-reported self-awareness was found between the two gaze direction groups in either experiment. The results indicate that eye contact elicits self-referential processing, but the effect may be stronger, or possibly limited to, live interaction. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Identifying additional studies for a systematic review of retention strategies in randomised controlled trials: making contact with trials units and trial methodologists.

    PubMed

    Brueton, Valerie; Tierney, Jayne F; Stenning, Sally; Rait, Greta

    2017-08-22

    Search strategies for systematic reviews aim to identify all evidence relevant to the research question posed. Reports of methodological research can be difficult to find leading to biased results in systematic reviews of research methodology. Evidence suggests that contact with investigators can help to identify unpublished research. To identify additional eligible randomised controlled trials (RCTs) for a Cochrane systematic review of strategies to improve retention in RCTs, we conducted a survey of UK clinical trials units (CTUs) and made contact with RCT methodologists. Key contacts for all UK CTUs were sent a personalised email with a short questionnaire and summary protocol of the Cochrane methodology review. The questionnaire asked whether a RCT evaluating strategies to improve retention embedded in a RCT had ever been conducted by the CTU. Questions about the stage of completion and publication of such RCTs were included. The summary protocol outlined the aims, eligibility criteria, examples of types of retention strategies, and the primary outcome for the systematic review. Personal communication with RCT methodologists and presentations of preliminary results of the review at conferences were also used to identify additional eligible RCTs. We checked the results of our standard searches to see if eligible studies identified through these additional methods were also found using our standard searches. We identified 14 of the 38 RCTs included in the Cochrane methodology review by contacting trials units and methodologists. Eleven of the 14 RCTs identified by these methods were either published in grey literature, in press or unpublished. Three remaining RCTs were fully published at the time. Six of the RCTs identified were not found through any other searches. The RCTs identified represented data for 6 of 14 RCTs of incentive strategies (52% of randomised participants included in the review), and 6 of 14 RCTs of communication strategies (52% of randomised

  20. Mitigation of epidemics in contact networks through optimal contact adaptation *

    PubMed Central

    Youssef, Mina; Scoglio, Caterina

    2013-01-01

    This paper presents an optimal control problem formulation to minimize the total number of infection cases during the spread of susceptible-infected-recovered SIR epidemics in contact networks. In the new approach, contact weighted are reduced among nodes and a global minimum contact level is preserved in the network. In addition, the infection cost and the cost associated with the contact reduction are linearly combined in a single objective function. Hence, the optimal control formulation addresses the tradeoff between minimization of total infection cases and minimization of contact weights reduction. Using Pontryagin theorem, the obtained solution is a unique candidate representing the dynamical weighted contact network. To find the near-optimal solution in a decentralized way, we propose two heuristics based on Bang-Bang control function and on a piecewise nonlinear control function, respectively. We perform extensive simulations to evaluate the two heuristics on different networks. Our results show that the piecewise nonlinear control function outperforms the well-known Bang-Bang control function in minimizing both the total number of infection cases and the reduction of contact weights. Finally, our results show awareness of the infection level at which the mitigation strategies are effectively applied to the contact weights. PMID:23906209

  1. 77 FR 54573 - Agency Information Collection; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-05

    ... DEPARTMENT OF ENERGY Agency Information Collection; Correction AGENCY: U.S. Department of Energy... document in the Federal Register of August 24, 2012, announcing the submission of an information request to... notice. FOR FURTHER INFORMATION CONTACT: Requests for additional information or copies of the information...

  2. Disproportionate Minority Contact.

    PubMed

    Fix, Rebecca L; Cyperski, Melissa A; Burkhart, Barry R

    2017-04-01

    The overrepresentation of racial/ethnic minorities within the criminal justice system relative to their population percentage, a phenomenon termed disproportionate minority contact, has been examined within general adult and adolescent offender populations; yet few studies have tested whether this phenomenon extends to juvenile sexual offenders (JSOs). In addition, few studies have examined whether offender race/ethnicity influences registration and notification requirements, which JSOs are subject to in some U.S. states. The present study assessed for disproportionate minority contact among general delinquent offenders and JSOs, meaning it aimed to test whether the criminal justice system treats those accused of sexual and non-sexual offenses differently by racial/ethnic group. Furthermore, racial/ethnic group differences in risk, legal classification, and sexual offending were examined for JSOs. Results indicated disproportionate minority contact was present among juveniles with non-sexual offenses and JSOs in Alabama. In addition, offense category and risk scores differed between African American and European American JSOs. Finally, registration classifications were predicted by offending characteristics, but not race/ethnicity. Implications and future directions regarding disproportionate minority contact among JSOs and social and legal policy affecting JSOs are discussed.

  3. Electrical contacts to individual SWCNTs: A review

    PubMed Central

    Hierold, Christofer; Haluska, Miroslav

    2014-01-01

    Summary Owing to their superior electrical characteristics, nanometer dimensions and definable lengths, single-walled carbon nanotubes (SWCNTs) are considered as one of the most promising materials for various types of nanodevices. Additionally, they can be used as either passive or active elements. To be integrated into circuitry or devices, they are typically connected with metal leads to provide electrical contacts. The properties and quality of these electrical contacts are important for the function and performance of SWCNT-based devices. Since carbon nanotubes are quasi-one-dimensional structures, contacts to them are different from those for bulk semiconductors. Additionally, some techniques used in Si-based technology are not compatible with SWCNT-based device fabrication, such as the contact area cleaning technique. In this review, an overview of the investigations of metal–SWCNT contacts is presented, including the principle of charge carrier injection through the metal–SWCNT contacts and experimental achievements. The methods for characterizing the electrical contacts are discussed as well. The parameters which influence the contact properties are summarized, mainly focusing on the contact geometry, metal type and the cleanliness of the SWCNT surface affected by the fabrication processes. Moreover, the challenges for widespread application of CNFETs are additionally discussed. PMID:25551048

  4. 76 FR 26295 - Information Collection Being Reviewed by the Federal Communications Commission Under Delegated...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-06

    ... Cathy.Williams@fcc.gov . FOR FURTHER INFORMATION CONTACT: For additional information, contact Cathy Williams on (202) 418-2918. SUPPLEMENTARY INFORMATION: OMB Control Number: 3060-0288. Title: Special... radio system, or to conduct equipment, program, service, and path tests. Federal Communications...

  5. Legendre submanifolds in contact manifolds as attractors and geometric nonequilibrium thermodynamics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Goto, Shin-itiro, E-mail: sgoto@ims.ac.jp

    It has been proposed that equilibrium thermodynamics is described on Legendre submanifolds in contact geometry. It is shown in this paper that Legendre submanifolds embedded in a contact manifold can be expressed as attractors in phase space for a certain class of contact Hamiltonian vector fields. By giving a physical interpretation that points outside the Legendre submanifold can represent nonequilibrium states of thermodynamic variables, in addition to that points of a given Legendre submanifold can represent equilibrium states of the variables, this class of contact Hamiltonian vector fields is physically interpreted as a class of relaxation processes, in which thermodynamicmore » variables achieve an equilibrium state from a nonequilibrium state through a time evolution, a typical nonequilibrium phenomenon. Geometric properties of such vector fields on contact manifolds are characterized after introducing a metric tensor field on a contact manifold. It is also shown that a contact manifold and a strictly convex function induce a lower dimensional dually flat space used in information geometry where a geometrization of equilibrium statistical mechanics is constructed. Legendre duality on contact manifolds is explicitly stated throughout.« less

  6. 78 FR 12058 - Information Collection Being Reviewed by the Federal Communications Commission Under Delegated...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-21

    ... to [email protected] and Cathy.Williams@fcc.gov . FOR FURTHER INFORMATION CONTACT: For additional information about the information collection, contact Cathy Williams at (202) 418-2918. SUPPLEMENTARY INFORMATION: OMB Number: 3060-0180. Title: Section 73.1610, Equipment Tests. Form Number: N/A. Type of Review...

  7. The integration of audio-tactile information is modulated by multimodal social interaction with physical contact in infancy.

    PubMed

    Tanaka, Yukari; Kanakogi, Yasuhiro; Kawasaki, Masahiro; Myowa, Masako

    2018-04-01

    Interaction between caregivers and infants is multimodal in nature. To react interactively and smoothly to such multimodal signals, infants must integrate all these signals. However, few empirical infant studies have investigated how multimodal social interaction with physical contact facilitates multimodal integration, especially regarding audio - tactile (A-T) information. By using electroencephalogram (EEG) and event-related potentials (ERPs), the present study investigated how neural processing involved in A-T integration is modulated by tactile interaction. Seven- to 8-months-old infants heard one pseudoword both whilst being tickled (multimodal 'A-T' condition), and not being tickled (unimodal 'A' condition). Thereafter, their EEG was measured during the perception of the same words. Compared to the A condition, the A-T condition resulted in enhanced ERPs and higher beta-band activity within the left temporal regions, indicating neural processing of A-T integration. Additionally, theta-band activity within the middle frontal region was enhanced, which may reflect enhanced attention to social information. Furthermore, differential ERPs correlated with the degree of engagement in the tickling interaction. We provide neural evidence that the integration of A-T information in infants' brains is facilitated through tactile interaction with others. Such plastic changes in neural processing may promote harmonious social interaction and effective learning in infancy. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  8. Optimization of mass spectrometry acquisition parameters for determination of polycarbonate additives, degradation products, and colorants migrating from food contact materials to chocolate.

    PubMed

    Bignardi, Chiara; Cavazza, Antonella; Laganà, Carmen; Salvadeo, Paola; Corradini, Claudio

    2018-01-01

    The interest towards "substances of emerging concerns" referred to objects intended to come into contact with food is recently growing. Such substances can be found in traces in simulants and in food products put in contact with plastic materials. In this context, it is important to set up analytical systems characterized by high sensitivity and to improve detection parameters to enhance signals. This work was aimed at optimizing a method based on UHPLC coupled to high resolution mass spectrometry to quantify the most common plastic additives, and able to detect the presence of polymers degradation products and coloring agents migrating from plastic re-usable containers. The optimization of mass spectrometric parameter settings for quantitative analysis of additives has been achieved by a chemometric approach, using a full factorial and d-optimal experimental designs, allowing to evaluate possible interactions between the investigated parameters. Results showed that the optimized method was characterized by improved features in terms of sensitivity respect to existing methods and was successfully applied to the analysis of a complex model food system such as chocolate put in contact with 14 polycarbonate tableware samples. A new procedure for sample pre-treatment was carried out and validated, showing high reliability. Results reported, for the first time, the presence of several molecules migrating to chocolate, in particular belonging to plastic additives, such Cyasorb UV5411, Tinuvin 234, Uvitex OB, and oligomers, whose amount was found to be correlated to age and degree of damage of the containers. Copyright © 2017 John Wiley & Sons, Ltd.

  9. 49 CFR 172.606 - Carrier information contact.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... attached to the vehicle at the brake hose or electrical connection; or (2) Have the shipping paper and... required shall instruct the operator of a motor vehicle, train, aircraft, or vessel to contact the carrier...) For transportation by highway, if a transport vehicle, (e.g., a semi-trailer or freight container-on...

  10. 77 FR 54511 - Facilitating the Use of Microwave for Wireless Backhaul and Other Uses and Providing Additional...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-05

    ... the Use of Microwave for Wireless Backhaul and Other Uses and Providing Additional Flexibility To... CONTACT: For further information contact John Schauble, Deputy Chief, Wireless Telecommunications Bureau... increase the flexibility of our part 101 rules to promote wireless backhaul. We seek more detailed comment...

  11. Additive-manufactured patient-specific titanium templates for thoracic pedicle screw placement: novel design with reduced contact area.

    PubMed

    Takemoto, Mitsuru; Fujibayashi, Shunsuke; Ota, Eigo; Otsuki, Bungo; Kimura, Hiroaki; Sakamoto, Takeshi; Kawai, Toshiyuki; Futami, Tohru; Sasaki, Kiyoyuki; Matsushita, Tomiharu; Nakamura, Takashi; Neo, Masashi; Matsuda, Shuich

    2016-06-01

    Image-based navigational patient-specific templates (PSTs) for pedicle screw (PS) placement have been described. With recent advances in three-dimensional computer-aided designs and additive manufacturing technology, various PST designs have been reported, although the template designs were not optimized. We have developed a novel PST design that reduces the contact area without sacrificing stability. It avoids susceptibility to intervening soft tissue, template geometric inaccuracy, and difficulty during template fitting. Fourteen candidate locations on the posterior aspect of the vertebra were evaluated. Among them, locations that had high reproducibility on computed tomography (CT) images and facilitated accurate PS placement were selected for the final PST design. An additive manufacturing machine (EOSINT M270) fabricated the PSTs using commercially pure titanium powder. For the clinical study, 36 scoliosis patients and 4 patients with ossification of the posterior longitudinal ligament (OPLL) were treated with thoracic PSs using our newly developed PSTs. We intraoperatively and postoperatively evaluated the accuracy of the PS hole created by the PST. Based on the segmentation reproducibility and stability analyses, we selected seven small, round contact points for our PST: bilateral superior and inferior points on the transverse process base, bilateral inferior points on the laminar, and a superior point on the spinous process. Clinically, the success rates of PS placement using this PST design were 98.6 % (414/420) for scoliosis patients and 100 % (46/46) for OPLL patients. This study provides a useful design concept for the development and introduction of patient-specific navigational templates for placing PSs.

  12. 76 FR 26294 - Information Collection Being Reviewed by the Federal Communications Commission Under Delegated...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-06

    ... Cathy.Williams@fcc.gov . FOR FURTHER INFORMATION CONTACT: For additional information, contact Cathy Williams on (202) 418-2918. SUPPLEMENTARY INFORMATION: OMB Control Number: 3060-0288. Title: Special... installation of a radio system, or to conduct equipment, program, service, and path tests. Federal...

  13. 29 CFR 502.44 - Additional information, if required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Additional information, if required. 502.44 Section 502.44 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS ENFORCEMENT OF CONTRACTUAL OBLIGATIONS FOR TEMPORARY ALIEN AGRICULTURAL WORKERS ADMITTED UNDER SECTION 218 OF...

  14. 29 CFR 501.44 - Additional information, if required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Additional information, if required. 501.44 Section 501.44 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS ENFORCEMENT OF CONTRACTUAL OBLIGATIONS FOR TEMPORARY ALIEN AGRICULTURAL WORKERS ADMITTED UNDER SECTION 218 OF...

  15. 21 CFR 207.31 - Additional drug listing information.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL DISTRIBUTION...

  16. 21 CFR 207.31 - Additional drug listing information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL DISTRIBUTION...

  17. 21 CFR 207.31 - Additional drug listing information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL DISTRIBUTION...

  18. 21 CFR 207.31 - Additional drug listing information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL DISTRIBUTION...

  19. 75 FR 34141 - Office of the National Coordinator for Health Information Technology; HIT Policy Committee's...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-16

    ... for additional information as it becomes available. Contact Person: Judy Sparrow, Office of the...-mail: judy.sparrow@hhs.gov Please call the contact person for up-to-date information on these meetings... that day. If you require special accommodations due to a disability, please contact Judy Sparrow at...

  20. Ferromagnetic tunnel contacts to graphene: Contact resistance and spin signal

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cubukcu, M.; Laczkowski, P.; Vergnaud, C.

    2015-02-28

    We report spin transport in CVD graphene-based lateral spin valves using different magnetic contacts. We compared the spin signal amplitude measured on devices where the cobalt layer is directly in contact with the graphene to the one obtained using tunnel contacts. Although a sizeable spin signal (up to ∼2 Ω) is obtained with direct contacts, the signal is strongly enhanced (∼400 Ω) by inserting a tunnel barrier. In addition, we studied the resistance-area product (R.A) of a variety of contacts on CVD graphene. In particular, we compared the R.A products of alumina and magnesium oxide tunnel barriers grown by sputteringmore » deposition of aluminum or magnesium and subsequent natural oxidation under pure oxygen atmosphere or by plasma. When using an alumina tunnel barrier on CVD graphene, the R.A product is high and exhibits a large dispersion. This dispersion can be highly reduced by using a magnesium oxide tunnel barrier, as for the R.A value. This study gives insight in the material quest for reproducible and efficient spin injection in CVD graphene.« less

  1. Contact Us, Department of Vertebrate Zoology, NMNH

    Science.gov Websites

    Contact Us NMNH Home › Research & Collections › Vertebrate Zoology › Contact Us Contacting Individual Staff Members: To contact members of the Department of Vertebrate Zoology please go to the Staff page. Most members will be linked to their own webpage that contains contact information, research

  2. 25 CFR 227.7 - Additional information from applicant.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases...

  3. 25 CFR 227.7 - Additional information from applicant.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases...

  4. 25 CFR 227.7 - Additional information from applicant.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases...

  5. 25 CFR 227.7 - Additional information from applicant.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases...

  6. Tyre contact length on dry and wet road surfaces measured by three-axial accelerometer

    NASA Astrophysics Data System (ADS)

    Matilainen, Mika; Tuononen, Ari

    2015-02-01

    We determined the tyre contact length on dry and wet roads by measuring the accelerations of the inner liner with a three-axial accelerometer. The influence of the tyre pressure, driving velocity, and tread depth on the contact length was studied in both types of road surface conditions. On dry asphalt the contact length was almost constant, regardless of the driving velocity. On wet asphalt the presence of water could be detected even at low driving velocities (e.g. 20 km/h for a worn tyre) as the contact length began to decrease from that found in the dry asphalt situation. In addition to improving the performance of active safety systems and driver warning systems, the contact length information could be beneficial for classifying and studying the aquaplaning behaviour of tyres.

  7. Estimating the Contact Endurance of the AISI 321 Stainless Steel Under Contact Gigacycle Fatigue Tests

    NASA Astrophysics Data System (ADS)

    Savrai, R. A.; Makarov, A. V.; Osintseva, A. L.; Malygina, I. Yu.

    2018-02-01

    Mechanical testing of the AISI 321 corrosion resistant austenitic steel for contact gigacycle fatigue has been conducted with the application of a new method of contact fatigue testing with ultrasonic frequency of loading according to a pulsing impact "plane-to-plane" contact scheme. It has been found that the contact endurance (the ability to resist the fatigue spalling) of the AISI 321 steel under contact gigacycle fatigue loading is determined by its plasticity margin and the possibility of additional hardening under contact loading. It is demonstrated that the appearance of localized deep and long areas of spalling on a material surface can serve as a qualitative characteristic for the loss of the fatigue strength of the AISI 321 steel under impact contact fatigue loading. The value of surface microhardness measured within contact spots and the maximum depth of contact damages in the peripheral zone of contact spots can serve as quantitative criteria for that purpose.

  8. Censored data treatment using additional information in intelligent medical systems

    NASA Astrophysics Data System (ADS)

    Zenkova, Z. N.

    2015-11-01

    Statistical procedures are a very important and significant part of modern intelligent medical systems. They are used for proceeding, mining and analysis of different types of the data about patients and their diseases; help to make various decisions, regarding the diagnosis, treatment, medication or surgery, etc. In many cases the data can be censored or incomplete. It is a well-known fact that censorship considerably reduces the efficiency of statistical procedures. In this paper the author makes a brief review of the approaches which allow improvement of the procedures using additional information, and describes a modified estimation of an unknown cumulative distribution function involving additional information about a quantile which is known exactly. The additional information is used by applying a projection of a classical estimator to a set of estimators with certain properties. The Kaplan-Meier estimator is considered as an estimator of the unknown cumulative distribution function, the properties of the modified estimator are investigated for a case of a single right censorship by means of simulations.

  9. 25 CFR 227.7 - Additional information from applicant.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases § 227.7...

  10. Identification of residue pairing in interacting β-strands from a predicted residue contact map.

    PubMed

    Mao, Wenzhi; Wang, Tong; Zhang, Wenxuan; Gong, Haipeng

    2018-04-19

    Despite the rapid progress of protein residue contact prediction, predicted residue contact maps frequently contain many errors. However, information of residue pairing in β strands could be extracted from a noisy contact map, due to the presence of characteristic contact patterns in β-β interactions. This information may benefit the tertiary structure prediction of mainly β proteins. In this work, we propose a novel ridge-detection-based β-β contact predictor to identify residue pairing in β strands from any predicted residue contact map. Our algorithm RDb 2 C adopts ridge detection, a well-developed technique in computer image processing, to capture consecutive residue contacts, and then utilizes a novel multi-stage random forest framework to integrate the ridge information and additional features for prediction. Starting from the predicted contact map of CCMpred, RDb 2 C remarkably outperforms all state-of-the-art methods on two conventional test sets of β proteins (BetaSheet916 and BetaSheet1452), and achieves F1-scores of ~ 62% and ~ 76% at the residue level and strand level, respectively. Taking the prediction of the more advanced RaptorX-Contact as input, RDb 2 C achieves impressively higher performance, with F1-scores reaching ~ 76% and ~ 86% at the residue level and strand level, respectively. In a test of structural modeling using the top 1 L predicted contacts as constraints, for 61 mainly β proteins, the average TM-score achieves 0.442 when using the raw RaptorX-Contact prediction, but increases to 0.506 when using the improved prediction by RDb 2 C. Our method can significantly improve the prediction of β-β contacts from any predicted residue contact maps. Prediction results of our algorithm could be directly applied to effectively facilitate the practical structure prediction of mainly β proteins. All source data and codes are available at http://166.111.152.91/Downloads.html or the GitHub address of https://github.com/wzmao/RDb2C .

  11. Contact sensing from force measurements

    NASA Technical Reports Server (NTRS)

    Bicchi, Antonio; Salisbury, J. K.; Brock, David L.

    1993-01-01

    This article addresses contact sensing (i.e., the problem of resolving the location of a contact, the force at the interface, and the moment about the contact normals). Called 'intrinsic' contact sensing for the use of internal force and torque measurements, this method allows for practical devices that provide simple, relevant contact information in practical robotic applications. Such sensors have been used in conjunction with robot hands to identify objects, determine surface friction, detect slip, augment grasp stability, measure object mass, probe surfaces, and control collision and for a variety of other useful tasks. This article describes the theoretical basis for their operation and provides a framework for future device design.

  12. 75 FR 8069 - Notice of Public Information Collection Being Submitted for Review and Approval to the Office of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-23

    ... should advise the contact listed below as soon as possible. ADDRESSES: Direct all PRA comments to.... FOR FURTHER INFORMATION CONTACT: Judith B. Herman, OMD, 202-418-0214. For additional information about the information collection(s) send an e-mail to [email protected] or contact Judith B. Herman, 202-418-0214...

  13. Feasibility of a psychosis information intervention to improve mental health literacy for professional groups in contact with young people.

    PubMed

    Sutton, Marie; O'Keeffe, Donal; Frawley, Timothy; Madigan, Kevin; Fanning, Felicity; Lawlor, Elizabeth; Roche, Eric; Kelly, Aine; Turner, Niall; Horenstein, Arielle; O'Callaghan, Eadbhard; Clarke, Mary

    2018-04-01

    The aim of this study was to assess the feasibility of a psychosis information intervention for professionals in contact with young people in Ireland. A quasi-experimental pre- and post-intervention design was used. One thousand and thirty-two professionals received an information intervention designed to improve mental health literacy (MHL) and confidence in providing help to people with psychosis. Seven hundred and fifty-five participants completed the Psychosis Information and Confidence Questionnaire pre- and post-intervention. The information intervention significantly improved participants': (1) knowledge of psychosis; (2) ability to recognize signs and symptoms of psychosis; (3) awareness of how to access services; and (4) confidence in providing help to people experiencing psychosis. Findings provide promising support for the intervention's feasibility and acceptability. The intervention enhanced MHL regarding psychosis among professionals in contact with young people. Further research assessing if such improvements translate to the facilitation of appropriate help seeking, the enhanced early detection of psychosis and a reduction of the duration of untreated psychosis is required. © 2017 John Wiley & Sons Australia, Ltd.

  14. Contact Graph Routing

    NASA Technical Reports Server (NTRS)

    Burleigh, Scott C.

    2011-01-01

    Contact Graph Routing (CGR) is a dynamic routing system that computes routes through a time-varying topology of scheduled communication contacts in a network based on the DTN (Delay-Tolerant Networking) architecture. It is designed to enable dynamic selection of data transmission routes in a space network based on DTN. This dynamic responsiveness in route computation should be significantly more effective and less expensive than static routing, increasing total data return while at the same time reducing mission operations cost and risk. The basic strategy of CGR is to take advantage of the fact that, since flight mission communication operations are planned in detail, the communication routes between any pair of bundle agents in a population of nodes that have all been informed of one another's plans can be inferred from those plans rather than discovered via dialogue (which is impractical over long one-way-light-time space links). Messages that convey this planning information are used to construct contact graphs (time-varying models of network connectivity) from which CGR automatically computes efficient routes for bundles. Automatic route selection increases the flexibility and resilience of the space network, simplifying cross-support and reducing mission management costs. Note that there are no routing tables in Contact Graph Routing. The best route for a bundle destined for a given node may routinely be different from the best route for a different bundle destined for the same node, depending on bundle priority, bundle expiration time, and changes in the current lengths of transmission queues for neighboring nodes; routes must be computed individually for each bundle, from the Bundle Protocol agent's current network connectivity model for the bundle s destination node (the contact graph). Clearly this places a premium on optimizing the implementation of the route computation algorithm. The scalability of CGR to very large networks remains a research topic

  15. 76 FR 5186 - National Protection and Programs Directorate; Agency Information Collection Activities; Office of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-28

    ...), Office of Infrastructure Protection (IP), will submit the following information collection request (ICR... Paperwork Reduction Act of 1995 (Pub. L. 104-13, 44 U.S.C. Chapter 35). IP is soliciting comments concerning... INFORMATION CONTACT: If additional information is required, contact DHS/NPPD/IP, Michael Beland, (703) 235...

  16. Value Addition in Information Technology and Literacy: An Empirical Investigation

    ERIC Educational Resources Information Center

    Sanghera, Kamaljeet K.

    2009-01-01

    The purpose of the research is to analyze the value addition in students' information communication and technology (ICT) literacy level and confidence in using technology after completing a general education information technology course at a four-year university. An online survey was created to examine students' perceptions. The findings revealed…

  17. Contact | FNLCR Staging

    Cancer.gov

    The ATOM Consortium is actively seeking additional partnerships with qualified pharma, biotech, technology, academic, government, and other organizations. If you are interested in getting involved,please contact: info@atomscience.org F

  18. 75 FR 30024 - Notice of Public Information Collection Being Reviewed by the Federal Communications Commission...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-28

    ....eop.gov and to the Federal Communications Commission via email to [email protected] and Cathy.Williams@fcc.gov . FOR FURTHER INFORMATION CONTACT: For additional information, contact Cathy Williams on (202) 418-2918. SUPPLEMENTARY INFORMATION: OMB Number: 3060-0180. Title: Section 73.1610, Equipment Tests. Form...

  19. Application of photogrammetry for analysis of occlusal contacts.

    PubMed

    Shigeta, Yuko; Hirabayashi, Rio; Ikawa, Tomoko; Kihara, Takuya; Ando, Eriko; Hirai, Shinya; Fukushima, Shunji; Ogawa, Takumi

    2013-04-01

    The conventional 2D-analysis methods for occlusal contacts provided limited information on tooth morphology. This present study aims to detect 3D positional information of occlusal contacts from 2D-photos via photogrammetry. We propose an image processing solution for analysis of occlusal contacts and facets via the black silicone method and a photogrammetric technique. The occlusal facets were reconstructed from a 2D-photograph data-set of inter-occlusal records into a 3D image via photogrammetry. The configuration of the occlusal surface was reproduced with polygons. In addition, the textures of the occlusal contacts were mapped to each polygon. DIFFERENCE FROM CONVENTIONAL METHODS: Constructing occlusal facets with 3D polygons from 2D-photos with photogrammetry was a defining characteristic of this image processing technique. It allowed us to better observe findings of the black silicone method. Compared with conventional 3D analysis using a 3D scanner, our 3D models did not reproduce the detail of the anatomical configuration. However, by merging the findings of the inter-occlusal record, the deformation of mandible and the displacement of periodontal ligaments under occlusal force were reflected in our model. EFFECT OR PERFORMANCE: Through the use of polygons in the conversion of 2D images to 3D images, we were able to define the relation between the location and direction of the occlusal contacts and facets, which was difficult to detect via conventional methods. Through our method of making a 3D polygon model, the findings of inter-occlusal records which reflected the jaw/teeth behavior under occlusal force could be observed 3-dimensionally. Copyright © 2012 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  20. [Ulcerative contact dermitis caused by premixed concrete (cement burns)].

    PubMed

    Ancona Alayón; Aranda Martínez, J G

    1978-01-01

    Cement dermatitis manifests clinically as a chronic dermatitis of irritative character, due to its alkaline nature and as allergic contact dermatitis produced by sensitization to chromium and cobalt occurring as trace elements. the present report deals with a mason without previous dermatitis, presenting bullae, ulcers and necrosis in lower limbs, short time after incidental contact at work, with premixed concrete. The clinical manifestations, such as short evolution, clear limitation to sites in close contact with concrete, negativity to standard patch testing and good prognosis with early treatment, are mentioned. The acute irritant nature of the disease is clear, in opposition to the classical manifestations of cement dermatitis. The need of studies of the chemical properties of this material including pH, alkalinity and the possible roll of additives employed, is part of the strategy for prevention of occupational dermatitis in the building trade, which should include also, information of hazards and proper training in their trade.

  1. 21 CFR 170.102 - Confidentiality of information in a premarket notification for a food contact substance (FCN).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Confidentiality of information in a premarket notification for a food contact substance (FCN). 170.102 Section 170.102 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD...

  2. 21 CFR 170.102 - Confidentiality of information in a premarket notification for a food contact substance (FCN).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Confidentiality of information in a premarket notification for a food contact substance (FCN). 170.102 Section 170.102 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD...

  3. 21 CFR 170.102 - Confidentiality of information in a premarket notification for a food contact substance (FCN).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Confidentiality of information in a premarket notification for a food contact substance (FCN). 170.102 Section 170.102 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD...

  4. 21 CFR 170.102 - Confidentiality of information in a premarket notification for a food contact substance (FCN).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Confidentiality of information in a premarket notification for a food contact substance (FCN). 170.102 Section 170.102 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD...

  5. Improving phylogenetic analyses by incorporating additional information from genetic sequence databases.

    PubMed

    Liang, Li-Jung; Weiss, Robert E; Redelings, Benjamin; Suchard, Marc A

    2009-10-01

    Statistical analyses of phylogenetic data culminate in uncertain estimates of underlying model parameters. Lack of additional data hinders the ability to reduce this uncertainty, as the original phylogenetic dataset is often complete, containing the entire gene or genome information available for the given set of taxa. Informative priors in a Bayesian analysis can reduce posterior uncertainty; however, publicly available phylogenetic software specifies vague priors for model parameters by default. We build objective and informative priors using hierarchical random effect models that combine additional datasets whose parameters are not of direct interest but are similar to the analysis of interest. We propose principled statistical methods that permit more precise parameter estimates in phylogenetic analyses by creating informative priors for parameters of interest. Using additional sequence datasets from our lab or public databases, we construct a fully Bayesian semiparametric hierarchical model to combine datasets. A dynamic iteratively reweighted Markov chain Monte Carlo algorithm conveniently recycles posterior samples from the individual analyses. We demonstrate the value of our approach by examining the insertion-deletion (indel) process in the enolase gene across the Tree of Life using the phylogenetic software BALI-PHY; we incorporate prior information about indels from 82 curated alignments downloaded from the BAliBASE database.

  6. Soft, smart contact lenses with integrations of wireless circuits, glucose sensors, and displays

    PubMed Central

    Park, Jihun; Kim, Joohee; Kim, So-Yun; Cheong, Woon Hyung; Jang, Jiuk; Park, Young-Geun; Na, Kyungmin; Kim, Yun-Tae; Heo, Jun Hyuk; Lee, Chang Young; Lee, Jung Heon; Bien, Franklin; Park, Jang-Ung

    2018-01-01

    Recent advances in wearable electronics combined with wireless communications are essential to the realization of medical applications through health monitoring technologies. For example, a smart contact lens, which is capable of monitoring the physiological information of the eye and tear fluid, could provide real-time, noninvasive medical diagnostics. However, previous reports concerning the smart contact lens have indicated that opaque and brittle components have been used to enable the operation of the electronic device, and this could block the user’s vision and potentially damage the eye. In addition, the use of expensive and bulky equipment to measure signals from the contact lens sensors could interfere with the user’s external activities. Thus, we report an unconventional approach for the fabrication of a soft, smart contact lens in which glucose sensors, wireless power transfer circuits, and display pixels to visualize sensing signals in real time are fully integrated using transparent and stretchable nanostructures. The integration of this display into the smart lens eliminates the need for additional, bulky measurement equipment. This soft, smart contact lens can be transparent, providing a clear view by matching the refractive indices of its locally patterned areas. The resulting soft, smart contact lens provides real-time, wireless operation, and there are in vivo tests to monitor the glucose concentration in tears (suitable for determining the fasting glucose level in the tears of diabetic patients) and, simultaneously, to provide sensing results through the contact lens display. PMID:29387797

  7. Soft, smart contact lenses with integrations of wireless circuits, glucose sensors, and displays.

    PubMed

    Park, Jihun; Kim, Joohee; Kim, So-Yun; Cheong, Woon Hyung; Jang, Jiuk; Park, Young-Geun; Na, Kyungmin; Kim, Yun-Tae; Heo, Jun Hyuk; Lee, Chang Young; Lee, Jung Heon; Bien, Franklin; Park, Jang-Ung

    2018-01-01

    Recent advances in wearable electronics combined with wireless communications are essential to the realization of medical applications through health monitoring technologies. For example, a smart contact lens, which is capable of monitoring the physiological information of the eye and tear fluid, could provide real-time, noninvasive medical diagnostics. However, previous reports concerning the smart contact lens have indicated that opaque and brittle components have been used to enable the operation of the electronic device, and this could block the user's vision and potentially damage the eye. In addition, the use of expensive and bulky equipment to measure signals from the contact lens sensors could interfere with the user's external activities. Thus, we report an unconventional approach for the fabrication of a soft, smart contact lens in which glucose sensors, wireless power transfer circuits, and display pixels to visualize sensing signals in real time are fully integrated using transparent and stretchable nanostructures. The integration of this display into the smart lens eliminates the need for additional, bulky measurement equipment. This soft, smart contact lens can be transparent, providing a clear view by matching the refractive indices of its locally patterned areas. The resulting soft, smart contact lens provides real-time, wireless operation, and there are in vivo tests to monitor the glucose concentration in tears (suitable for determining the fasting glucose level in the tears of diabetic patients) and, simultaneously, to provide sensing results through the contact lens display.

  8. 75 FR 11192 - Proposed Information Collection; OMB Control Number 1018-0094; Federal Fish and Wildlife Permit...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-10

    ... them by May 10, 2010. ADDRESSES: Send your comments on the IC to Hope Grey, Information Collection... (mail); or hope_ grey@fws.gov (e-mail). FOR FURTHER INFORMATION CONTACT: To request additional information about this IC, contact Hope Grey by mail or e- [[Page 11193

  9. Fragrance allergic contact dermatitis.

    PubMed

    Cheng, Judy; Zug, Kathryn A

    2014-01-01

    Fragrances are a common cause of allergic contact dermatitis in Europe and in North America. They can affect individuals at any age and elicit a spectrum of reactions from contact urticaria to systemic contact dermatitis. Growing recognition of the widespread use of fragrances in modern society has fueled attempts to prevent sensitization through improved allergen identification, labeling, and consumer education. This review provides an overview and update on fragrance allergy. Part 1 discusses the epidemiology and evaluation of suspected fragrance allergy. Part 2 reviews screening methods, emerging fragrance allergens, and management of patients with fragrance contact allergy. This review concludes by examining recent legislation on fragrances and suggesting potential additions to screening series to help prevent and detect fragrance allergy.

  10. Online respondent-driven sampling for studying contact patterns relevant for the spread of close-contact pathogens: a pilot study in Thailand.

    PubMed

    Stein, Mart L; van Steenbergen, Jim E; Chanyasanha, Charnchudhi; Tipayamongkholgul, Mathuros; Buskens, Vincent; van der Heijden, Peter G M; Sabaiwan, Wasamon; Bengtsson, Linus; Lu, Xin; Thorson, Anna E; Kretzschmar, Mirjam E E

    2014-01-01

    Information on social interactions is needed to understand the spread of airborne infections through a population. Previous studies mostly collected egocentric information of independent respondents with self-reported information about contacts. Respondent-driven sampling (RDS) is a sampling technique allowing respondents to recruit contacts from their social network. We explored the feasibility of webRDS for studying contact patterns relevant for the spread of respiratory pathogens. We developed a webRDS system for facilitating and tracking recruitment by Facebook and email. One-day diary surveys were conducted by applying webRDS among a convenience sample of Thai students. Students were asked to record numbers of contacts at different settings and self-reported influenza-like-illness symptoms, and to recruit four contacts whom they had met in the previous week. Contacts were asked to do the same to create a network tree of socially connected individuals. Correlations between linked individuals were analysed to investigate assortativity within networks. We reached up to 6 waves of contacts of initial respondents, using only non-material incentives. Forty-four (23.0%) of the initially approached students recruited one or more contacts. In total 257 persons participated, of which 168 (65.4%) were recruited by others. Facebook was the most popular recruitment option (45.1%). Strong assortative mixing was seen by age, gender and education, indicating a tendency of respondents to connect to contacts with similar characteristics. Random mixing was seen by reported number of daily contacts. Despite methodological challenges (e.g. clustering among respondents and their contacts), applying RDS provides new insights in mixing patterns relevant for close-contact infections in real-world networks. Such information increases our knowledge of the transmission of respiratory infections within populations and can be used to improve existing modelling approaches. It is worthwhile

  11. Online Respondent-Driven Sampling for Studying Contact Patterns Relevant for the Spread of Close-Contact Pathogens: A Pilot Study in Thailand

    PubMed Central

    Stein, Mart L.; van Steenbergen, Jim E.; Chanyasanha, Charnchudhi; Tipayamongkholgul, Mathuros; Buskens, Vincent; van der Heijden, Peter G. M.; Sabaiwan, Wasamon; Bengtsson, Linus; Lu, Xin; Thorson, Anna E.; Kretzschmar, Mirjam E. E.

    2014-01-01

    Background Information on social interactions is needed to understand the spread of airborne infections through a population. Previous studies mostly collected egocentric information of independent respondents with self-reported information about contacts. Respondent-driven sampling (RDS) is a sampling technique allowing respondents to recruit contacts from their social network. We explored the feasibility of webRDS for studying contact patterns relevant for the spread of respiratory pathogens. Materials and Methods We developed a webRDS system for facilitating and tracking recruitment by Facebook and email. One-day diary surveys were conducted by applying webRDS among a convenience sample of Thai students. Students were asked to record numbers of contacts at different settings and self-reported influenza-like-illness symptoms, and to recruit four contacts whom they had met in the previous week. Contacts were asked to do the same to create a network tree of socially connected individuals. Correlations between linked individuals were analysed to investigate assortativity within networks. Results We reached up to 6 waves of contacts of initial respondents, using only non-material incentives. Forty-four (23.0%) of the initially approached students recruited one or more contacts. In total 257 persons participated, of which 168 (65.4%) were recruited by others. Facebook was the most popular recruitment option (45.1%). Strong assortative mixing was seen by age, gender and education, indicating a tendency of respondents to connect to contacts with similar characteristics. Random mixing was seen by reported number of daily contacts. Conclusions Despite methodological challenges (e.g. clustering among respondents and their contacts), applying RDS provides new insights in mixing patterns relevant for close-contact infections in real-world networks. Such information increases our knowledge of the transmission of respiratory infections within populations and can be used to

  12. 78 FR 12780 - Agency Information Collection Activities: Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-25

    ... INFORMATION CONTACT: To request additional information about this ICR, Elizabeth Lemersal, Earthquake Hazards... . SUPPLEMENTARY INFORMATION: Title: Earthquake Hazards Program Research and Monitoring. OMB Control Number: 1028... findings are essential to fulfilling USGS's responsibility under the Earthquake Hazards Reduction Act to...

  13. Improved Electrical Contact For Dowhhole Drilling Networks

    DOEpatents

    Hall, David R.; Hall, Jr., H. Tracy; Pixton, David S.; Dahlgren, Scott; Fox, Joe; Sneddon, Cameron

    2005-08-16

    An electrical contact system for transmitting information across tool joints while minimizing signal reflections that occur at the tool joints includes a first electrical contact comprising an annular resilient material. An annular conductor is embedded within the annular resilient material and has a surface exposed from the annular resilient material. A second electrical contact is provided that is substantially equal to the first electrical contact. Likewise, the second electrical contact has an annular resilient material and an annular conductor. The two electrical contacts configured to contact one another such that the annular conductors of each come into physical contact. The annular resilient materials of each electrical contact each have dielectric characteristics and dimensions that are adjusted to provide desired impedance to the electrical contacts.

  14. Citation parameters of contact lens-related articles published in the ophthalmic literature.

    PubMed

    Cardona, Genís; Sanz, Joan P

    2014-09-01

    This study aimed at exploring the citation parameters of contact lenses articles published in the Ophthalmology thematic category of the Journal Citation Reports (JCR). The Thompson Reuters Web of Science database was accessed to record bibliometric information and citation parameters of all journals listed under the Ophthalmology area of the 2011 JCR edition, including the journals with main publication interests in the contact lens field. In addition, the same database was used to unveil all contact lens-related articles published in 2011 in the same thematic area, whereupon differences in citation parameters between those articles published in contact lens and non-contact lens-related journals were explored. Significant differences in some bibliometric indicators such as half-life and overall citation count were found between contact lens-related journals (shorter half-life and fewer citations) and the median values for the Ophthalmology thematic area of the JCR. Visual examination of all Ophthalmology journals uncovered a total of 156 contact lens-related articles, published in 28 different journals, with 27 articles each for Contact Lens & Anterior Eye, Eye & Contact Lens, and Optometry and Vision Science. Significant differences in citation parameters were encountered between those articles published in contact lens and non-contact lens source journals. These findings, which disclosed contact lenses to be a fertile area of research, may be of interest to researchers and institutions. Differences in bibliometric indicators are of relevance to avoid unwanted bias when conducting between- and within-discipline comparisons of articles, journals, and researchers.

  15. DETAIL OF PLAQUE WITH ADDITIONAL DESIGN AND CONSTRUCTION INFORMATION, SOUTHEAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF PLAQUE WITH ADDITIONAL DESIGN AND CONSTRUCTION INFORMATION, SOUTHEAST ABUTMENT - Connecticut Avenue Bridge, Spans Rock Creek & Potomac Parkway at Connecticut Avenue, Washington, District of Columbia, DC

  16. How do adults and teens with self-declared Autism Spectrum Disorder experience eye contact? A qualitative analysis of first-hand accounts

    PubMed Central

    Roberts, Nicole; Lin, Cathy; Birmingham, Elina

    2017-01-01

    A tendency to avoid eye contact is an early indicator of Autism Spectrum Disorder (ASD), and difficulties with eye contact often persist throughout the lifespan. Eye contact difficulties may underlie social cognitive deficits in ASD, and can create significant social and occupational barriers. Thus, this topic has received substantial research and clinical attention. In this study, we used qualitative methods to analyze self-reported experiences with eye contact as described by teens and adults with self-declared ASD. Results suggest people with a self- declared ASD diagnosis experience adverse emotional and physiological reactions, feelings of being invaded, and sensory overload while making eye contact, in addition to difficulties understanding social nuances, and difficulties receiving and sending nonverbal information. Some data support existing mindblindness frameworks, and hyperarousal or hypoarousal theories of eye contact, but we also present novel findings unaccounted for by existing frameworks. Additionally, we highlight innovative strategies people with self-declared ASD have devised to overcome or cope with their eye contact difficulties. PMID:29182643

  17. High precision in protein contact prediction using fully convolutional neural networks and minimal sequence features.

    PubMed

    Jones, David T; Kandathil, Shaun M

    2018-04-26

    In addition to substitution frequency data from protein sequence alignments, many state-of-the-art methods for contact prediction rely on additional sources of information, or features, of protein sequences in order to predict residue-residue contacts, such as solvent accessibility, predicted secondary structure, and scores from other contact prediction methods. It is unclear how much of this information is needed to achieve state-of-the-art results. Here, we show that using deep neural network models, simple alignment statistics contain sufficient information to achieve state-of-the-art precision. Our prediction method, DeepCov, uses fully convolutional neural networks operating on amino-acid pair frequency or covariance data derived directly from sequence alignments, without using global statistical methods such as sparse inverse covariance or pseudolikelihood estimation. Comparisons against CCMpred and MetaPSICOV2 show that using pairwise covariance data calculated from raw alignments as input allows us to match or exceed the performance of both of these methods. Almost all of the achieved precision is obtained when considering relatively local windows (around 15 residues) around any member of a given residue pairing; larger window sizes have comparable performance. Assessment on a set of shallow sequence alignments (fewer than 160 effective sequences) indicates that the new method is substantially more precise than CCMpred and MetaPSICOV2 in this regime, suggesting that improved precision is attainable on smaller sequence families. Overall, the performance of DeepCov is competitive with the state of the art, and our results demonstrate that global models, which employ features from all parts of the input alignment when predicting individual contacts, are not strictly needed in order to attain precise contact predictions. DeepCov is freely available at https://github.com/psipred/DeepCov. d.t.jones@ucl.ac.uk.

  18. PconsFold: improved contact predictions improve protein models.

    PubMed

    Michel, Mirco; Hayat, Sikander; Skwark, Marcin J; Sander, Chris; Marks, Debora S; Elofsson, Arne

    2014-09-01

    Recently it has been shown that the quality of protein contact prediction from evolutionary information can be improved significantly if direct and indirect information is separated. Given sufficiently large protein families, the contact predictions contain sufficient information to predict the structure of many protein families. However, since the first studies contact prediction methods have improved. Here, we ask how much the final models are improved if improved contact predictions are used. In a small benchmark of 15 proteins, we show that the TM-scores of top-ranked models are improved by on average 33% using PconsFold compared with the original version of EVfold. In a larger benchmark, we find that the quality is improved with 15-30% when using PconsC in comparison with earlier contact prediction methods. Further, using Rosetta instead of CNS does not significantly improve global model accuracy, but the chemistry of models generated with Rosetta is improved. PconsFold is a fully automated pipeline for ab initio protein structure prediction based on evolutionary information. PconsFold is based on PconsC contact prediction and uses the Rosetta folding protocol. Due to its modularity, the contact prediction tool can be easily exchanged. The source code of PconsFold is available on GitHub at https://www.github.com/ElofssonLab/pcons-fold under the MIT license. PconsC is available from http://c.pcons.net/. Supplementary data are available at Bioinformatics online. © The Author 2014. Published by Oxford University Press.

  19. Solar cell contacts

    NASA Technical Reports Server (NTRS)

    Meier, D. L.; Campbell, R. B.; Davis, J. R., Jr.; Rai-Choudhury, P.; Sienkiewicz, L. J.

    1982-01-01

    Two experimental contact systems were examined and compared to a baseline contact system consisting of evaporated layers of titanium, palladium, and silver and an electroplated layer of copper. The first experimental contact system consisted of evaporated layers of titanium, nickel, and copper and an electroplated layer of copper. This system performed as well as the baseline system in all respects, including its response to temperature stress tests, to a humidity test, and to an accelerated aging test. In addition, the cost of this system is estimated to be only 43 percent of the cost of the baseline system at a production level of 25 MW/year. The second experimental contact system consisted of evaporated layers of nickel and copper and an electroplated layer of copper. Cells with this system show serious degradation in a temperature stress test at 350 C for 30 minutes. Auger electron spectroscopy was used to show that the evaporated nickel layer is not an adequate barrier to copper diffusion even at temperatures as low as 250 C. This fact brings into question the long-term reliability of this contact system.

  20. Ball to separator contact forces in angular contact ball bearings under thrust and radial loads

    NASA Technical Reports Server (NTRS)

    Nypan, L. J.

    1978-01-01

    Experimental data are reported on ball to cage contact forces in a 110 mm bore ball bearing operating at speeds to 12,000 rpm under radial and thrust loads. Information is also reported on cage to inner race land contact force, cage to inner race land clearance, and cage to shaft speed ratios.

  1. Ball to separator contact forces in angular contact ball bearings under thrust and radial loads

    NASA Technical Reports Server (NTRS)

    Nypan, L. J.

    1977-01-01

    Experimental data is reported on ball to cage contact forces in a 110 mm bore ball bearing operating at speeds to 12000 rpm under radial and thrust loads. Information is also reported on cage to inner race land contact force, cage to inner race land clearance, and cage to shaft speed ratios.

  2. Elastohydrodynamic lubrication of elliptical contacts

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.

    1981-01-01

    The determination of the minimum film thickness within contact is considered for both fully flooded and starved conditions. A fully flooded conjunction is one in which the film thickness is not significantly changed when the amount of lubricant is increased. The fully flooded results presented show the influence of contact geometry on minimum film thickness as expressed by the ellipticity parameter and the dimensionless speed, load, and materials parameters. These results are applied to materials of high elastic modulus (hard EHL), such as metal, and to materials of low elastic modulus(soft EHL), such as rubber. In addition to the film thickness equations that are developed, contour plots of pressure and film thickness are given which show the essential features of elastohydrodynamically lubricated conjunctions. The crescent shaped region of minimum film thickness, with its side lobes in which the separation between the solids is a minimum, clearly emerges in the numerical solutions. In addition to the 3 presented for the fully flooded results, 15 more cases are used for hard EHL contacts and 18 cases are used for soft EHL contacts in a theoretical study of the influence of lubricant starvation on film thickness and pressure. From the starved results for both hard and soft EHL contacts, a simple and important dimensionless inlet boundary distance is specified. This inlet boundary distance defines whether a fully flooded or a starved condition exists in the contact. Contour plots of pressure and film thickness in and around the contact are shown for conditions.

  3. Additional Haptic Information Provided by Anchors Reduces Postural Sway in Young Adults Less Than Does Light Touch

    PubMed Central

    Moraes, Renato; Bedo, Bruno L. S.; Santos, Luciana O.; Batistela, Rosangela A.; Santiago, Paulo R. P.; Mauerberg-deCastro, Eliane

    2018-01-01

    This study investigated the effect of adding haptic information to the control of posture, as well as comparing the effect of both the “light touch” (LT) and “anchor system” (AS) paradigms on postural sway. Additionally, it compared the effect of location and number of points of contact to the control of posture in young adults. The location consisted of using the anchors tied to the finger and held by the hands, and, for LT, the fingertip. For the number of points of contact, participants used two hands, and then separately the dominant hand, and the non-dominant hand, for both anchor and LT paradigms. Participants stood upright with feet-together and in tandem position while performing tasks that combined the use of anchors and LT, points of contact (hand grip and finger), and number of points of contact (two hands and one hand). In this study, the anchors consist of holding in each hand a flexible cable with the other end attached to the ground. The LT consists of slightly touching a rigid surface with the tip of the index finger. The results showed, first, that the anchors improved postural control less than did the LT. Second, they revealed that holding the anchors with the hands or with them tied to the fingertip resulted in a similar reduction in postural sway only in the tandem position. For the feet-together position, the anchors tied to the fingertip were ineffective. Similarly, the use of one or two hands did not affect the contribution of the anchors. However, using two hands in the LT condition was more effective than was one hand. Third, our results showed the presence of a temporal delay between force and center-of-pressure (COP) for the anchors, only in the AP direction with feet-together. In conclusion, overall, the anchors were less effective in reducing postural sway than was the LT. The anchors attached to fingertips were as effective as the hand-held anchors in the tandem position, yet ineffective during foot-together standing. Force

  4. Predicting protein contact map using evolutionary and physical constraints by integer programming.

    PubMed

    Wang, Zhiyong; Xu, Jinbo

    2013-07-01

    Protein contact map describes the pairwise spatial and functional relationship of residues in a protein and contains key information for protein 3D structure prediction. Although studied extensively, it remains challenging to predict contact map using only sequence information. Most existing methods predict the contact map matrix element-by-element, ignoring correlation among contacts and physical feasibility of the whole-contact map. A couple of recent methods predict contact map by using mutual information, taking into consideration contact correlation and enforcing a sparsity restraint, but these methods demand for a very large number of sequence homologs for the protein under consideration and the resultant contact map may be still physically infeasible. This article presents a novel method PhyCMAP for contact map prediction, integrating both evolutionary and physical restraints by machine learning and integer linear programming. The evolutionary restraints are much more informative than mutual information, and the physical restraints specify more concrete relationship among contacts than the sparsity restraint. As such, our method greatly reduces the solution space of the contact map matrix and, thus, significantly improves prediction accuracy. Experimental results confirm that PhyCMAP outperforms currently popular methods no matter how many sequence homologs are available for the protein under consideration. http://raptorx.uchicago.edu.

  5. The Charging Events in Contact-Separation Electrification.

    PubMed

    Musa, Umar G; Cezan, S Doruk; Baytekin, Bilge; Baytekin, H Tarik

    2018-02-06

    Contact electrification (CE)-charging of surfaces that are contacted and separated, is a common phenomenon, however it is not completely understood yet. Recent studies using surface imaging techniques and chemical analysis revealed a 'spatial' bipolar distribution of charges at the nano dimension, which made a paradigm shift in the field. However, such analyses can only provide information about the charges that remained on the surface after the separation, providing limited information about the actual course of the CE event. Tapping common polymers and metal surfaces to each other and detecting the electrical potential produced on these surfaces 'in-situ' in individual events of contact and separation, we show that, charges are generated and transferred between the surfaces in both events; the measured potential is bipolar in contact and unipolar in separation. We show, the 'contact-charges' on the surfaces are indeed the net charges that results after the separation process, and a large contribution to tribocharge harvesting comes, in fact, from the electrostatic induction resulting from the generated CE charges. Our results refine the mechanism of CE providing information for rethinking the conventional ranking of materials' charging abilities, charge harvesting, and charge prevention.

  6. 36 CFR 1290.3 - Sources of assassination records and additional records and information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Sources of assassination records and additional records and information. Assassination records and... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Sources of assassination records and additional records and information. 1290.3 Section 1290.3 Parks, Forests, and Public Property...

  7. Oregano essential oil as an antimicrobial additive to detergent for hand washing and food contact surface cleaning.

    PubMed

    Rhoades, J; Gialagkolidou, K; Gogou, M; Mavridou, O; Blatsiotis, N; Ritzoulis, C; Likotrafiti, E

    2013-10-01

    To investigate the potential use of oregano essential oil as an antimicrobial agent in liquid soap for hand washing and for food contact surface cleaning. Oregano essential oil (O.E.O.) was emulsified in liquid detergent solution. This was challenge tested against a commercial antimicrobial soap in hand washing trials using natural flora. Soap with O.E.O. was as effective as the commercial antimicrobial soap at reducing aerobic plate count on the hands and more effective than plain soap with no additives. Cloths wetted with soap with O.E.O. were used to clean three different surfaces contaminated with four bacterial pathogens. For three of the four pathogens, the addition of 0·5% v/v O.E.O. to the soap solution enhanced cleaning performance and also reduced bacterial survival on the cloth after cleaning. Oregano essential oil (0·5%) is effective as an antimicrobial additive to detergent solutions for hand washing and surface cleaning. This preliminary study has shown that oregano essential oil is a potential alternative to antimicrobials used in various detergents, such as chloroxylenol and triclosan, which can have adverse environmental and health effects. Further development could lead to a commercial product. © 2013 The Society for Applied Microbiology.

  8. Application of contact glow discharge electrolysis method for degradation of batik dye waste Remazol Red by the addition of Fe2+ ion

    NASA Astrophysics Data System (ADS)

    Saksono, Nelson; Puspita, Indah; Sukreni, Tulus

    2017-03-01

    Contact Glow Discharge Electrolysis (CGDE) has been shown to degrade much weight organic compounds such as dyes because the production of hydroxil radical (•OH) is excess. This research aims to degrade batik dye waste Remazol Red, using CGDE method with the addition of Fe2+ ion. The addition of iron salt compounds has proven to increase process efficiency. Dye degradation is known by measure its absorbances with Spectrophotometer UV-Vis. The result of study showed that percentage degradation was 99.92% in 20 minutes which obtained by using Na2SO4 0.01 M, with addition FeSO4 0,1 gram, applied voltage 860 volt, and 1 wolfram anode 5 mm depth.

  9. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  10. 75 FR 42118 - Proposed Information Collection; OMB Control Number 1018-0070; Incidental Take of Marine Mammals...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-20

    ... comments on the IC to Hope Grey, Information Collection Clearance Officer, Fish and Wildlife Service, MS 222-ARLSQ, 4401 North Fairfax Drive, Arlington, VA 22203 (mail); or hope_grey@fws.gov (e-mail). FOR FURTHER INFORMATION CONTACT: To request additional information about this IC, contact Hope Grey by mail or...

  11. Role of Firing Temperature, Sheet Resistance, and Contact Area in Contact Formation on Screen-Printed Metal Contact of Silicon Solar Cell

    NASA Astrophysics Data System (ADS)

    Ahmad, Samir Mahmmod; Leong, Cheow Siu; Sopian, K.; Zaidi, Saleem H.

    2018-03-01

    Formation of an Ohmic contact requires a suitable firing temperature, appropriate doping profile, and contact dimensions within resolution limits of the screen-printing process. In this study, the role of the peak firing temperature in standard rapid thermal annealing (RTA) six-zone conveyor belt furnace (CBF) and two inexpensive alternate RTA systems [a custom-designed, three-zone, 5″-diameter quartz tube furnace (QTF) and a tabletop, 3″-diameter rapid thermal processing (RTP)] has been investigated. In addition, the role of sheet resistance and contact area in achieving low-resistance ohmic contacts has been examined. Electrical measurements of ohmic contacts between silver paste/ n +-emitter layer with varying sheet resistances and aluminum paste/ p-doped wafer were carried out in transmission line method configuration. Experimental measurements of the contact resistivity ( ρ c) exhibited the lowest values for CBF at 0.14 mΩ cm2 for Ag and 100 mΩ cm2 for Al at a peak firing temperature of 870°C. For the QTF configuration, lowest measured contact resistivities were 3.1 mΩ cm2 for Ag and 74.1 mΩ cm2 for Al at a peak firing temperature of 925°C. Finally, for the RTP configuration, lowest measured contact resistivities were 1.2 mΩ cm2 for Ag and 68.5 mΩ cm2 for Al at a peak firing temperature of 780°C. The measured contact resistivity exhibits strong linear dependence on sheet resistance. The contact resistivity for Ag decreases with contact area, while for Al the opposite behavior is observed.

  12. 29 CFR 2570.39 - Opportunities to submit additional information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Opportunities to submit additional information. 2570.39 Section 2570.39 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY ADMINISTRATION, DEPARTMENT OF LABOR ADMINISTRATION AND ENFORCEMENT UNDER THE EMPLOYEE RETIREMENT INCOME SECURITY ACT OF 1974 PROCEDURAL REGULATIONS UNDER THE...

  13. Dynamic characterization of contact interactions of micro-robotic leg structures

    NASA Astrophysics Data System (ADS)

    Ryou, Jeong Hoon; Oldham, Kenn Richard

    2014-05-01

    Contact dynamics of microelectromechanical systems (MEMS) are typically complicated and it is consequently difficult to model all dynamic characteristics observed in time-domain responses involving impact. This issue becomes worse when a device, such as a mobile micro-robot, is not clamped to a substrate and has a complex mechanical structure. To characterize such a contact interaction situation, two walking micro-robot prototypes are tested having intentionally simple structures with different dimensions (21.2 mm × 16.3 mm × 0.75 mm and 32 mm × 25.4 mm × 4.1 mm) and weights (0.16 and 2.7 g). Contact interaction behaviors are characterized by analyzing experimental data under various excitation signals. A numerical approach was used to derive a novel contact model consisting of a coefficient of restitution matrix that uses modal vibration information. Experimental validation of the simulation model shows that it captures various dynamic features of the contact interaction when simulating leg behavior more accurately than previous contact models, such as single-point coefficient of restitution or compliant ground models. In addition, this paper shows that small-scale forces can be added to the simulation to improve model accuracy, resulting in average errors across driving conditions on the order of 2-6% for bounce frequency, maximum foot height, and average foot height, although there is substantial variation from case to case.

  14. 21 CFR 803.12 - Where and how do I submit reports and additional information?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... information? 803.12 Section 803.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... I submit reports and additional information? (a) You must submit any written report or additional information required under this part to FDA, CDRH, Medical Device Reporting, P.O. Box 3002, Rockville, MD...

  15. 21 CFR 803.12 - Where and how do I submit reports and additional information?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... information? 803.12 Section 803.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... I submit reports and additional information? (a) You must submit any written report or additional information required under this part to FDA, CDRH, Medical Device Reporting, P.O. Box 3002, Rockville, MD...

  16. 21 CFR 803.12 - Where and how do I submit reports and additional information?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... information? 803.12 Section 803.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... I submit reports and additional information? (a) You must submit any written report or additional information required under this part to FDA, CDRH, Medical Device Reporting, P.O. Box 3002, Rockville, MD...

  17. 34 CFR 222.185 - What additional information must be included in an emergency grant application?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 1 2011-07-01 2011-07-01 false What additional information must be included in an... for A Grant § 222.185 What additional information must be included in an emergency grant application? In addition to the information specified in § 222.184, an application for an emergency grant must...

  18. 25 CFR 103.14 - Can BIA request additional information?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Can BIA request additional information? 103.14 Section 103.14 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES LOAN GUARANTY, INSURANCE, AND INTEREST SUBSIDY How a Lender Obtains a Loan Guaranty or Insurance Coverage § 103.14 Can BIA...

  19. An electric contact method to measure contact state between stator and rotor in a traveling wave ultrasonic motor.

    PubMed

    Qu, Jianjun; Zhou, Tieying

    2003-09-01

    Performances of ultrasonic motor (USM) depend considerably on contact state between stator and rotor. To measure the contact state in a traveling wave ultrasonic motor (TWUSM), a special test method is necessary. This paper develops a new method named electric contact method to measure contact state of stator and rotor in traveling wave type USM. The effects of pre-load and exciting voltage (amplitude) of stator on contact state between stator and rotor are studied with this method. By a simulating tester of friction properties of TWUSM, the variations of stalling torque and no-load speed against the pre-load and the exciting voltage have been measured. The relative contact length that describes the contact characteristic of stator and rotor is proposed. The relation between the properties of TWUSM and the contact state of stator and rotor are presented. Additionally, according to a theoretical contact model of stator and rotor in TWUSM, the contact lengths at given conditions are calculated and compared with the experimental results.

  20. 16 CFR 803.20 - Requests for additional information or documentary material.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Requests for additional information or documentary material. 803.20 Section 803.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.20 Requests for additional...

  1. 16 CFR 803.20 - Requests for additional information or documentary material.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Requests for additional information or documentary material. 803.20 Section 803.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.20 Requests for additional...

  2. 16 CFR 803.20 - Requests for additional information or documentary material.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Requests for additional information or documentary material. 803.20 Section 803.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.20 Requests for additional...

  3. 16 CFR 803.20 - Requests for additional information or documentary material.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Requests for additional information or documentary material. 803.20 Section 803.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.20 Requests for additional...

  4. 16 CFR 803.20 - Requests for additional information or documentary material.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Requests for additional information or documentary material. 803.20 Section 803.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.20 Requests for additional...

  5. 75 FR 66120 - Information Collection Sent to the Office of Management and Budget (OMB) for Approval; OMB...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-27

    ...-mail). Please provide a copy of your comments to Hope Grey, Information Collection Clearance Officer, U...), or hope_grey@fws.gov (e-mail). FOR FURTHER INFORMATION CONTACT: To request additional information about this ICR, contact Hope Grey by mail or e-mail (see ADDRESSES) or by telephone at (703) 358-2482...

  6. Effect of electrode contact area on the information content of the recorded electrogastrograms: An analysis based on Rényi entropy and Teager-Kaiser Energy

    NASA Astrophysics Data System (ADS)

    Alagumariappan, Paramasivam; Krishnamurthy, Kamalanand; Kandiah, Sundravadivelu; Ponnuswamy, Mannar Jawahar

    2017-06-01

    Electrogastrograms (EGG) are electrical signals originating from the digestive system, which are closely correlated with its mechanical activity. Electrogastrography is an efficient non-invasive method for examining the physiological and pathological states of the human digestive system. There are several factors such as fat conductivity, abdominal thickness, change in electrode surface area etc, which affects the quality of the recorded EGG signals. In this work, the effect of variations in the contact area of surface electrodes on the information content of the measured electrogastrograms is analyzed using Rényi entropy and Teager-Kaiser Energy (TKE). Two different circular cutaneous electrodes with approximate contact areas of 201.14 mm2 and 283.64 mm2, have been adopted and EGG signals were acquired using the standard three electrode protocol. Further, the information content of the measured EGG signals were analyzed using the computed values of entropy and energy. Results demonstrate that the information content of the measured EGG signals increases by 6.72% for an increase in the contact area of the surface electrode by 29.09%. Further, it was observed that the average energy increases with increase in the contact surface area. This work appears to be of high clinical significance since the accurate measurement of EGG signals without loss in its information content, is highly useful for the design of diagnostic assistance tools for automated diagnosis and mass screening of digestive disorders.

  7. Fingertip contact influences human postural control

    NASA Technical Reports Server (NTRS)

    Jeka, J. J.; Lackner, J. R.

    1994-01-01

    Touch and pressure stimulation of the body surface can strongly influence apparent body orientation, as well as the maintenance of upright posture during quiet stance. In the present study, we investigated the relationship between postural sway and contact forces at the fingertip while subjects touched a rigid metal bar. Subjects were tested in the tandem Romberg stance with eyes open or closed under three conditions of fingertip contact: no contact, touch contact (< 0.98 N of force), and force contact (as much force as desired). Touch contact was as effective as force contact or sight of the surroundings in reducing postural sway when compared to the no contact, eyes closed condition. Body sway and fingertip forces were essentially in phase with force contact, suggesting that fingertip contact forces are physically counteracting body sway. Time delays between body sway and fingertip forces were much larger with light touch contact, suggesting that the fingertip is providing information that allows anticipatory innervation of musculature to reduce body sway. The results are related to observations on precision grip as well as the somatosensory, proprioceptive, and motor mechanisms involved in the reduction of body sway.

  8. 43 CFR 2884.22 - Can BLM ask me for additional information?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Can BLM ask me for additional information? 2884.22 Section 2884.22 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU... THE MINERAL LEASING ACT Applying for MLA Grants or TUPs § 2884.22 Can BLM ask me for additional...

  9. 43 CFR 2884.22 - Can BLM ask me for additional information?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Can BLM ask me for additional information? 2884.22 Section 2884.22 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU... THE MINERAL LEASING ACT Applying for MLA Grants or TUPs § 2884.22 Can BLM ask me for additional...

  10. BUTIMBA: Intensifying the Hunt for Child TB in Swaziland through Household Contact Tracing

    PubMed Central

    Alonso Ustero, Pilar; Golin, Rachel; Anabwani, Florence; Mzileni, Bulisile; Sikhondze, Welile; Stevens, Robert

    2017-01-01

    Background Limited data exists to inform contact tracing guidelines in children and HIV-affected populations. We evaluated the yield and additionality of household contact and source case investigations in Swaziland, a TB/HIV high-burden setting, while prioritizing identification of childhood TB. Methods In partnership with 7 local TB clinics, we implemented standardized contact tracing of index cases (IC) receiving TB treatment. Prioritizing child contacts and HIV-affected households, screening officers screened contacts for TB symptoms and to identify risk factors associated with TB. We ascertained factors moderating the yield of contact tracing and measured the impact of our program by additional notifications. Results From March 2013 to November 2015, 3,258 ICs (54% bacteriologically confirmed; 70% HIV-infected; 85% adults) were enrolled leading to evaluation of 12,175 contacts (median age 18 years, IQR 24–42; 45% children; 9% HIV-infected). Among contacts, 196 TB cases (56% bacteriologically confirmed) were diagnosed resulting in a program yield of 1.6% for all forms of TB. The number needed to screen (NNS) to identify a bacteriologically confirmed TB case or all forms TB case traced from a child IC <5 years was respectively 62% and 40% greater than the NNS for tracing from an adult IC. In year one, we demonstrated a 32% increase in detection of bacteriologically confirmed child TB. Contacts were more likely to have TB if <5 years (OR = 2.0), HIV-infected (OR = 4.9), reporting ≥1 TB symptoms (OR = 7.7), and sharing a bed (OR = 1.7) or home (OR = 1.4) with the IC. There was a 1.4 fold increased chance of detecting a TB case in households known to be HIV-affected. Conclusion Contact tracing prioritizing children is not only feasible in a TB/HIV high-burden setting but contributes to overall case detection. Our findings support WHO guidelines prioritizing contact tracing among children and HIV-infected populations while highlighting potential to integrate TB

  11. Follicular contact dermatitis revisited: A review emphasizing neomycin-associated follicular contact dermatitis

    PubMed Central

    Cohen, Philip R

    2014-01-01

    Follicular contact dermatitis clinically presents as individual papules that include a central hair follicle. Pathologic features involve the follicle and the surrounding dermis: spongiosis and vesicle formation of the follicular epithelium associated with perifollicular and perivascular lymphocytic inflammation. Using the PubMed database, an extensive literature search was performed on follicular contact dermatitis and neomycin. Relevant papers were reviewed and the clinical and pathologic features, the associated chemicals (including a more detailed description of neomycin), the hypothesized pathogenesis, and the management of follicular contact dermatitis were described. Several agents-either as allergens or irritants-have been reported to elicit follicular contact dermatitis. Several hypotheses have been suggested for the selective involvement of the follicles in follicular contact dermatitis: patient allergenicity, characteristics of the agent, vehicle containing the agent, application of the agent, and external factors. The differential diagnosis of follicular contact dermatitis includes not only recurrent infundibulofolliculitis, but also drug eruption, mite infestation, viral infection, and dermatoses that affect hair follicles. The primary therapeutic intervention for follicular contact dermatitis is withdrawal of the causative agent; treatment with a topical corticosteroid preparation may also promote resolution of the dermatitis. In conclusion, follicular contact dermatitis may be secondary to allergens or irritants; topical antibiotics, including neomycin, may cause this condition. Several factors may account for the selective involvement of the hair follicle in this condition. Treatment of the dermatitis requires withdrawal of the associated topical agent; in addition, topical corticosteroids may be helpful to promote resolution of lesions. PMID:25516854

  12. Recreational Diver Behavior and Contacts with Benthic Organisms in the Abrolhos National Marine Park, Brazil

    NASA Astrophysics Data System (ADS)

    Giglio, Vinicius J.; Luiz, Osmar J.; Schiavetti, Alexandre

    2016-03-01

    In the last two decades, coral reefs have become popular among recreational divers, especially inside marine protected areas. However, the impact caused by divers on benthic organisms may be contributing to the degradation of coral reefs. We analyzed the behavior of 142 scuba divers in the Abrolhos National Marine Park, Brazil. We tested the effect of diver profile, reef type, use of additional equipment, timing, and group size on diver behavior and their contacts with benthic organisms. Eighty-eight percent of divers contacted benthic organism at least once, with an average of eight touches and one damage per dive. No significant differences in contacts were verified among gender, group size, or experience level. Artificial reef received a higher rate of contact than pinnacle and fringe reefs. Specialist photographers and sidemount users had the highest rates, while non-users of additional equipment and mini camera users had the lowest contact rates. The majority of contacts were incidental and the highest rates occurred in the beginning of a dive. Our findings highlight the need of management actions, such as the provision of pre-dive briefing including ecological aspects of corals and beginning dives over sand bottoms or places with low coral abundance. Gathering data on diver behavior provides managers with information that can be used for tourism management.

  13. Recreational Diver Behavior and Contacts with Benthic Organisms in the Abrolhos National Marine Park, Brazil.

    PubMed

    Giglio, Vinicius J; Luiz, Osmar J; Schiavetti, Alexandre

    2016-03-01

    In the last two decades, coral reefs have become popular among recreational divers, especially inside marine protected areas. However, the impact caused by divers on benthic organisms may be contributing to the degradation of coral reefs. We analyzed the behavior of 142 scuba divers in the Abrolhos National Marine Park, Brazil. We tested the effect of diver profile, reef type, use of additional equipment, timing, and group size on diver behavior and their contacts with benthic organisms. Eighty-eight percent of divers contacted benthic organism at least once, with an average of eight touches and one damage per dive. No significant differences in contacts were verified among gender, group size, or experience level. Artificial reef received a higher rate of contact than pinnacle and fringe reefs. Specialist photographers and sidemount users had the highest rates, while non-users of additional equipment and mini camera users had the lowest contact rates. The majority of contacts were incidental and the highest rates occurred in the beginning of a dive. Our findings highlight the need of management actions, such as the provision of pre-dive briefing including ecological aspects of corals and beginning dives over sand bottoms or places with low coral abundance. Gathering data on diver behavior provides managers with information that can be used for tourism management.

  14. EpiContactTrace: an R-package for contact tracing during livestock disease outbreaks and for risk-based surveillance.

    PubMed

    Nöremark, Maria; Widgren, Stefan

    2014-03-17

    During outbreak of livestock diseases, contact tracing can be an important part of disease control. Animal movements can also be of relevance for risk-based surveillance and sampling, i.e. both when assessing consequences of introduction or likelihood of introduction. In many countries, animal movement data are collected with one of the major objectives to enable contact tracing. However, often an analytical step is needed to retrieve appropriate information for contact tracing or surveillance. In this study, an open source tool was developed to structure livestock movement data to facilitate contact-tracing in real time during disease outbreaks and for input in risk-based surveillance and sampling. The tool, EpiContactTrace, was written in the R-language and uses the network parameters in-degree, out-degree, ingoing contact chain and outgoing contact chain (also called infection chain), which are relevant for forward and backward tracing respectively. The time-frames for backward and forward tracing can be specified independently and search can be done on one farm at a time or for all farms within the dataset. Different outputs are available; datasets with network measures, contacts visualised in a map and automatically generated reports for each farm either in HTML or PDF-format intended for the end-users, i.e. the veterinary authorities, regional disease control officers and field-veterinarians. EpiContactTrace is available as an R-package at the R-project website (http://cran.r-project.org/web/packages/EpiContactTrace/). We believe this tool can help in disease control since it rapidly can structure essential contact information from large datasets. The reproducible reports make this tool robust and independent of manual compilation of data. The open source makes it accessible and easily adaptable for different needs.

  15. EpiContactTrace: an R-package for contact tracing during livestock disease outbreaks and for risk-based surveillance

    PubMed Central

    2014-01-01

    Background During outbreak of livestock diseases, contact tracing can be an important part of disease control. Animal movements can also be of relevance for risk-based surveillance and sampling, i.e. both when assessing consequences of introduction or likelihood of introduction. In many countries, animal movement data are collected with one of the major objectives to enable contact tracing. However, often an analytical step is needed to retrieve appropriate information for contact tracing or surveillance. Results In this study, an open source tool was developed to structure livestock movement data to facilitate contact-tracing in real time during disease outbreaks and for input in risk-based surveillance and sampling. The tool, EpiContactTrace, was written in the R-language and uses the network parameters in-degree, out-degree, ingoing contact chain and outgoing contact chain (also called infection chain), which are relevant for forward and backward tracing respectively. The time-frames for backward and forward tracing can be specified independently and search can be done on one farm at a time or for all farms within the dataset. Different outputs are available; datasets with network measures, contacts visualised in a map and automatically generated reports for each farm either in HTML or PDF-format intended for the end-users, i.e. the veterinary authorities, regional disease control officers and field-veterinarians. EpiContactTrace is available as an R-package at the R-project website (http://cran.r-project.org/web/packages/EpiContactTrace/). Conclusions We believe this tool can help in disease control since it rapidly can structure essential contact information from large datasets. The reproducible reports make this tool robust and independent of manual compilation of data. The open source makes it accessible and easily adaptable for different needs. PMID:24636731

  16. How to Estimate Epidemic Risk from Incomplete Contact Diaries Data?

    PubMed

    Mastrandrea, Rossana; Barrat, Alain

    2016-06-01

    Social interactions shape the patterns of spreading processes in a population. Techniques such as diaries or proximity sensors allow to collect data about encounters and to build networks of contacts between individuals. The contact networks obtained from these different techniques are however quantitatively different. Here, we first show how these discrepancies affect the prediction of the epidemic risk when these data are fed to numerical models of epidemic spread: low participation rate, under-reporting of contacts and overestimation of contact durations in contact diaries with respect to sensor data determine indeed important differences in the outcomes of the corresponding simulations with for instance an enhanced sensitivity to initial conditions. Most importantly, we investigate if and how information gathered from contact diaries can be used in such simulations in order to yield an accurate description of the epidemic risk, assuming that data from sensors represent the ground truth. The contact networks built from contact sensors and diaries present indeed several structural similarities: this suggests the possibility to construct, using only the contact diary network information, a surrogate contact network such that simulations using this surrogate network give the same estimation of the epidemic risk as simulations using the contact sensor network. We present and compare several methods to build such surrogate data, and show that it is indeed possible to obtain a good agreement between the outcomes of simulations using surrogate and sensor data, as long as the contact diary information is complemented by publicly available data describing the heterogeneity of the durations of human contacts.

  17. How to Estimate Epidemic Risk from Incomplete Contact Diaries Data?

    PubMed Central

    Mastrandrea, Rossana; Barrat, Alain

    2016-01-01

    Social interactions shape the patterns of spreading processes in a population. Techniques such as diaries or proximity sensors allow to collect data about encounters and to build networks of contacts between individuals. The contact networks obtained from these different techniques are however quantitatively different. Here, we first show how these discrepancies affect the prediction of the epidemic risk when these data are fed to numerical models of epidemic spread: low participation rate, under-reporting of contacts and overestimation of contact durations in contact diaries with respect to sensor data determine indeed important differences in the outcomes of the corresponding simulations with for instance an enhanced sensitivity to initial conditions. Most importantly, we investigate if and how information gathered from contact diaries can be used in such simulations in order to yield an accurate description of the epidemic risk, assuming that data from sensors represent the ground truth. The contact networks built from contact sensors and diaries present indeed several structural similarities: this suggests the possibility to construct, using only the contact diary network information, a surrogate contact network such that simulations using this surrogate network give the same estimation of the epidemic risk as simulations using the contact sensor network. We present and compare several methods to build such surrogate data, and show that it is indeed possible to obtain a good agreement between the outcomes of simulations using surrogate and sensor data, as long as the contact diary information is complemented by publicly available data describing the heterogeneity of the durations of human contacts. PMID:27341027

  18. Multiplicative and additive modulation of neuronal tuning with population activity affects encoded information

    PubMed Central

    Arandia-Romero, Iñigo; Tanabe, Seiji; Drugowitsch, Jan; Kohn, Adam; Moreno-Bote, Rubén

    2016-01-01

    Numerous studies have shown that neuronal responses are modulated by stimulus properties, and also by the state of the local network. However, little is known about how activity fluctuations of neuronal populations modulate the sensory tuning of cells and affect their encoded information. We found that fluctuations in ongoing and stimulus-evoked population activity in primate visual cortex modulate the tuning of neurons in a multiplicative and additive manner. While distributed on a continuum, neurons with stronger multiplicative effects tended to have less additive modulation, and vice versa. The information encoded by multiplicatively-modulated neurons increased with greater population activity, while that of additively-modulated neurons decreased. These effects offset each other, so that population activity had little effect on total information. Our results thus suggest that intrinsic activity fluctuations may act as a `traffic light' that determines which subset of neurons are most informative. PMID:26924437

  19. Joint Contact Stress

    PubMed Central

    Brand, Richard A

    2005-01-01

    A joint's normal mechanical history contributes to the maintenance of articular cartilage and underlying bone. Loading facilitates the flow of nutrients into cartilage and waste products away, and additionally provides the mechanical signals essential for normal cell and tissue maintenance. Deleteriously low or high contact stresses have been presumed to result in joint deterioration, and particular aspects of the mechanical environment may facilitate repair of damaged cartilage. For decades, investigators have explored static joint contact stresses (under some more or less arbitrary condition) as a surrogate of the relevant mechanical history. Contact stresses have been estimated in vitro in many joints and in a number of species, although only rarely in vivo. Despite a number of widely varying techniques (and spatial resolutions) to measure these contact stresses, reported ranges of static peak normal stresses are relatively similar from joint to joint across species, and in the range of 0.5 to 5.0 MPa. This suggests vertebrate diarthrodial joints have evolved to achieve similar mechanical design criteria. Available evidence also suggests some disorders of cartilage deterioration are associated with somewhat higher peak pressures ranging from 1-20 MPa, but overlapping the range of normal pressures. Some evidence and considerable logic suggests static contact stresses per se do not predict cartilage responses, but rather temporal aspects of the contact stress history. Static contact stresses may therefore not be a reasonable surrogate for biomechanical studies. Rather, temporal and spatial aspects of the loading history undoubtedly induce beneficial and deleterious biological responses. Finally, since all articular cartilage experiences similar stresses, the concept of a "weight-bearing" versus a "non-weight-bearing" joint seems flawed, and should be abandoned. PMID:16089079

  20. Resistivity of Rotated Graphite-Graphene Contacts.

    PubMed

    Chari, Tarun; Ribeiro-Palau, Rebeca; Dean, Cory R; Shepard, Kenneth

    2016-07-13

    Robust electrical contact of bulk conductors to two-dimensional (2D) material, such as graphene, is critical to the use of these 2D materials in practical electronic devices. Typical metallic contacts to graphene, whether edge or areal, yield a resistivity of no better than 100 Ω μm but are typically >10 kΩ μm. In this Letter, we employ single-crystal graphite for the bulk contact to graphene instead of conventional metals. The graphite contacts exhibit a transfer length up to four-times longer than in conventional metallic contacts. Furthermore, we are able to drive the contact resistivity to as little as 6.6 Ω μm(2) by tuning the relative orientation of the graphite and graphene crystals. We find that the contact resistivity exhibits a 60° periodicity corresponding to crystal symmetry with additional sharp decreases around 22° and 39°, which are among the commensurate angles of twisted bilayer graphene.

  1. New Results on Contact Binary Stars

    NASA Astrophysics Data System (ADS)

    He, J.; Qian, S.; Zhu, L.; Liu, L.; Liao, W.

    2014-08-01

    Contact binary star is a kind of close binary with the strongest interaction binary system. Their formations and evolutions are unsolved problems in astrophysics. Since 2000, our groups have observed and studied more than half a hundred of contact binaries. In this report, I will summarize our new results of some contact binary stars (e.g. UZ CMi, GSC 03526-01995, FU Dra, GSC 0763-0572, V524 Mon, MR Com, etc.). They are as follow: (1) We discovered that V524 Mon and MR Com are shallow-contact binaries with their period decreasing; (2) GSC 03526-01995 is middle-contact binary without a period increasing or decreasing continuously; (3) UZ CMi, GSC 0763-0572 and FU Dra are middle-contact binaries with the period increasing continuously; (4) UZ CMi, GSC 03526-01995, FU Dra and V524 Mon show period oscillation which may imply the presence of additional components in these contact binaries.

  2. 77 FR 67655 - Agency Information Collection Activities; Proposed Collection; Comment Request; Food Additive...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-13

    ...] Agency Information Collection Activities; Proposed Collection; Comment Request; Food Additive Petitions and Investigational Food Additive Exemptions; Extension AGENCY: Food and Drug Administration, HHS... solicits comments on food additive petitions regarding animal food. DATES: Submit electronic or written...

  3. Complementary Barrier Infrared Detector (CBIRD) Contact Methods

    NASA Technical Reports Server (NTRS)

    Ting, David Z.; Hill, Cory J.; Gunapala, Sarath D.

    2013-01-01

    The performance of the CBIRD detector is enhanced by using new device contacting methods that have been developed. The detector structure features a narrow gap adsorber sandwiched between a pair of complementary, unipolar barriers that are, in turn, surrounded by contact layers. In this innovation, the contact adjacent to the hole barrier is doped n-type, while the contact adjacent to the electron barrier is doped p-type. The contact layers can have wider bandgaps than the adsorber layer, so long as good electrical contacts are made to them. If good electrical contacts are made to either (or both) of the barriers, then one could contact the barrier(s) directly, obviating the need for additional contact layers. Both the left and right contacts can be doped either n-type or ptype. Having an n-type contact layer next to the electron barrier creates a second p-n junction (the first being the one between the hole barrier and the adsorber) over which applied bias could drop. This reduces the voltage drop over the adsorber, thereby reducing dark current generation in the adsorber region.

  4. Motives that head and neck cancer patients have for contacting a specialist nurse - an empirical study.

    PubMed

    Salander, Pär; Isaksson, Joakim; Granström, Brith; Laurell, Göran

    2016-11-01

    The purpose of this study is to systematically explore the motives for patients with head and neck cancer to contact a specialist nurse during two years postdiagnosis. Research focusing on the role of specialist nurses in cancer care almost exclusively concern cancers other than head and neck cancer. Qualitative, descriptive study based on the contacts between patients with head and neck cancer and a specialist nurse. Patients were invited to contact a specialist nurse by telephone. The specialist nurse took systematic field notes, that is, she registered who contacted her, the nature of the call and the outcome. Sixty patients were included. In descending order, the motives for contact were questions about practical and uncomplicated matters, consultations about medical troubles/worries, presenting a report of the patient's situation, requests for additional information about the treatment plan and requests for medical information. The pattern of the patients' motivations for calling was not related to medical or social factors, suggesting that the initiative to make contact is very much a question of the complexity of individual life circumstances. Very few referrals were sent from the specialist nurse to other professionals. The specialist nurse turned out to be more than just a coordinator of health-care resources. The findings bring up questions about the potential of the nurse's function as a coordinator, but also as a potential attachment figure, and questions about the nurse's relationships to other professionals. When implementing a specialist nurse function, it is important to decide whether the function should be inspired by a broader relational perspective. In addition to the indispensible competence and experience in the clinical field of head and neck cancer, training in counselling and acquaintance with object-relational psychology will then be desirable. © 2016 John Wiley & Sons Ltd.

  5. The Unique Molecular Signatures of Contact Dermatitis and Implications for Treatment.

    PubMed

    Leonard, Alexandra; Guttman-Yassky, Emma

    2018-05-12

    Irritant contact dermatitis (ICD) and allergic contact dermatitis (ACD) are common skin disorders that are characterized by inflammation, oozing, crusting, and pruritus. Atopic dermatitis (AD) is an inflammatory skin disease characterized by immune and barrier abnormalities and is additionally a risk factor for acquiring ICD and ACD. New work on allergic sensitization to common allergens (e.g., nickel and fragrance) in human skin has shown that different allergens have distinct molecular fingerprinting. For example, nickel promotes strong Th1/Th17 polarization, whereas fragrance allergy causes Th2/Th22 skewing, which is similar to the phenotype of AD. While ACD has previously been considered to be constant across all allergens, largely based on mouse models involving strong sensitizers, these new data suggest that ACD differs mechanistically according to allergen. Further, ACD in the setting of concurrent AD shows a different and attenuated phenotype as compared to healthy individuals with ACD, which influences the way AD patients respond to vaccination and other treatment modalities. As in contact sensitization, skin challenged by food patch testing shows that common food allergens (e.g., peanut and barley) also cause distinct immune polarizations in the skin. Additionally, house dust mite reactions in human skin have been profiled to show unique Th2, Th9, and Th17/22 activation as compared to controls, which are similar to the phenotype of psoriasis and contact responses to nickel. Given this information, ACD patients should be treated based on their unique allergen polarity. Refined understanding of the molecular behavior of contact dermatitis and related diseases translates to improved methods of inducing tolerance in sensitized allergic patients, such as with targeted drug therapy and epicutaneous immunotherapy.

  6. 29 CFR 37.88 - Who may contact CRC about a complaint?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Who may contact CRC about a complaint? 37.88 Section 37.88... PROVISIONS OF THE WORKFORCE INVESTMENT ACT OF 1998 (WIA) Compliance Procedures § 37.88 Who may contact CRC... contact CRC for information about the complaint. The Director will determine what information, if any...

  7. Touch Sensor Responds to Contact Pressure

    NASA Technical Reports Server (NTRS)

    Bejczy, A. K.

    1982-01-01

    Optical tactile sensor for mechanical hands senses contact pressure via change in light reflected from an elastic covering. Pressure against a cell cover causes distortion, which changes internal reflection of light. Change is sensed by detector, and output signal informs operator of contact. The greater the pressure and distortion, the greater the change in light reflection.

  8. Degradation of phenol and Cr (VI) wastewater with contact glow discharge electrolysis method and the addition of Fe2+

    NASA Astrophysics Data System (ADS)

    Kurniawan, Raden Ridzki Aditya; Saksono, Nelson

    2017-11-01

    Phenol and Cr (VI) are an organic waste and dangerous heavy metals which generated from a wide variety of industrial processes such as textiles, paints, dyes, and others. For that reason, we need effective waste treatment technologies, one of them is Contact Glow Discharge Electrolysis (CGDE). This method produce reactive species such as radical hidroxyl so as to be able to degradate phenol and Cr(VI) wastewater effectively. This research aims to obtain the effect of Fe 2+ and air bubbles in degradation of phenol and Cr (VI) waste simultaneously. Waste degradation is measured its absorbance with UV-Vis spectrophotometer. In the conditions of 600 Volt voltage, Na2SO4 0.02 M, anode depth of 1.5 cm, the addition of Fe2+ 40 ppm and the addition of air bubbles for 30 minutes was obtained a percentage degradation of phenol 99.47%, Cr (VI) 76.75% and specific energy of 344.473 kJ / mmol.

  9. TVDG Contacts

    Science.gov Websites

    for Sandy Fax By Fax: 1 631 344 4583 Attention Chuck Carlson EMail By E-Mail: Send E-Mail to Chuck Group Leader James Alessi Telephone: 1-631-344-4004 E-Mail: Peter Thieberger Information can be returned 1 631 344 4581. An organizational list of staff members and how to contact them. The BNL E-Mail and

  10. 32 CFR 1901.03 - Contact for general information and requests.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... INTELLIGENCE AGENCY PUBLIC RIGHTS UNDER THE PRIVACY ACT OF 1974 General § 1901.03 Contact for general... and Privacy Coordinator, Central Intelligence Agency, Washington, DC. 20505. Requests with the...

  11. 32 CFR 1901.03 - Contact for general information and requests.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... INTELLIGENCE AGENCY PUBLIC RIGHTS UNDER THE PRIVACY ACT OF 1974 General § 1901.03 Contact for general... and Privacy Coordinator, Central Intelligence Agency, Washington, DC. 20505. Requests with the...

  12. Influence of addition order and contact time on thorium(IV) retention by hematite in the presence of humic acids.

    PubMed

    Reiller, Pascal; Casanova, Florence; Moulin, Valérie

    2005-03-15

    The influence of addition order and contact time in the system hematite (alpha-Fe2O3)-humic acid (HA)-thorium(IV) (Th(IV)) was studied in batch experiments. Th(IV) is considered here as a chemical analogue of other actinides (IV). The sorption isotherms were acquired varying pH in the range 2-10 and HA concentration in the range 1-100 mg/L. As already observed by numerous authors, Th(IV) retention was hindered when HA and hematite were equilibrated beforehand during 24 h. As it has been observed in a previous study, this effect was drastic when the ratio between humic and surface (iron oxide) sites exceeds a critical value. However, when HA was added after a 24-h equilibration of the hematite-Th(IV) system, Th(IV) was barely desorbed from the iron oxide surface. Furthermore, no drastic effect of the ratio between humic and surface sites could be evidenced, as the increase of HA concentration only results in a slight monotonic decrease in Th(IV) retention. Increasing contact time between components of the systems only indicated slight Th(IV) retention variation. This was interpreted as a consequence of slow kinetic controls of both the Th(IV)-HA complexation and HA-hematite sorption.

  13. Better Ohmic Contacts For InP Semiconductor Devices

    NASA Technical Reports Server (NTRS)

    Weizer, Victor G.; Fatemi, Navid S.

    1995-01-01

    Four design modifications enable fabrication of improved ohmic contacts on InP-based semiconductor devices. First modification consists of insertion of layer of gold phosphide between n-doped InP and metal or other overlayer of contact material. Second, includes first modification plus use of particular metal overlayer to achieve very low contact resistivities. Third, also involves deposition of Au(2)P(3) interlayer; in addition, refractory metal (W or Ta) deposited to form contact overlayer. In fourth, contact layer of Auln alloy deposited directly on InP. Improved contacts exhibit low electrical resistances and fabricated without exposing devices to destructive predeposition or postdeposition treatments.

  14. Contact Dermatitis for the Practicing Allergist.

    PubMed

    Bernstein, David I

    2015-01-01

    This article provides an overview of important practice recommendations from the recently updated Contact Dermatitis Practice Parameter. This updated parameter provides essential recommendations pertaining to clinical history, physical examination, and patch testing evaluation of patients suspected of allergic contact dermatitis. In addition to providing guidance for performing and interpreting closed patch testing, the updated parameter provides concrete recommendations for assessing metal hypersensitivity in patients receiving prosthetic devices, for evaluating workers with occupational contact dermatitis, and also for addressing allergic contact dermatitis in children. Finally, the document provides practical recommendations useful for educating patients regarding avoidance of exposure to known contact sensitizers in the home and at work. The Contact Dermatitis Parameter is designed as a practical, evidence-based clinical tool to be used by allergists and dermatologists who routinely are called upon to evaluate patients with skin disorders. Copyright © 2015 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  15. Eye Contact Affects Object Representation in 9-Month-Old Infants.

    PubMed

    Okumura, Yuko; Kobayashi, Tessei; Itakura, Shoji

    2016-01-01

    Social cues in interaction with others enable infants to extract useful information from their environment. Although previous research has shown that infants process and retain different information about an object depending on the presence of social cues, the effect of eye contact as an isolated independent variable has not been investigated. The present study investigated how eye contact affects infants' object processing. Nine-month-olds engaged in two types of social interactions with an experimenter. When the experimenter showed an object without eye contact, the infants processed and remembered both the object's location and its identity. In contrast, when the experimenter showed the object while making eye contact with the infant, the infant preferentially processed object's identity but not its location. Such effects might assist infants to selectively attend to useful information. Our findings revealed that 9-month-olds' object representations are modulated in accordance with the context, thus elucidating the function of eye contact for infants' object representation.

  16. "The Dose Makes the Poison": Informing Consumers About the Scientific Risk Assessment of Food Additives.

    PubMed

    Bearth, Angela; Cousin, Marie-Eve; Siegrist, Michael

    2016-01-01

    Intensive risk assessment is required before the approval of food additives. During this process, based on the toxicological principle of "the dose makes the poison,ˮ maximum usage doses are assessed. However, most consumers are not aware of these efforts to ensure the safety of food additives and are therefore sceptical, even though food additives bring certain benefits to consumers. This study investigated the effect of a short video, which explains the scientific risk assessment and regulation of food additives, on consumers' perceptions and acceptance of food additives. The primary goal of this study was to inform consumers and enable them to construct their own risk-benefit assessment and make informed decisions about food additives. The secondary goal was to investigate whether people have different perceptions of food additives of artificial (i.e., aspartame) or natural origin (i.e., steviolglycoside). To attain these research goals, an online experiment was conducted on 185 Swiss consumers. Participants were randomly assigned to either the experimental group, which was shown a video about the scientific risk assessment of food additives, or the control group, which was shown a video about a topic irrelevant to the study. After watching the video, the respondents knew significantly more, expressed more positive thoughts and feelings, had less risk perception, and more acceptance than prior to watching the video. Thus, it appears that informing consumers about complex food safety topics, such as the scientific risk assessment of food additives, is possible, and using a carefully developed information video is a successful strategy for informing consumers. © 2015 Society for Risk Analysis.

  17. Microscopic contact area and friction between medical textiles and skin.

    PubMed

    Derler, S; Rotaru, G-M; Ke, W; El Issawi-Frischknecht, L; Kellenberger, P; Scheel-Sailer, A; Rossi, R M

    2014-10-01

    The mechanical contact between medical textiles and skin is relevant in the health care for patients with vulnerable skin or chronic wounds. In order to gain new insights into the skin-textile contact on the microscopic level, the 3D surface topography of a normal and a new hospital bed sheet with a regular surface structure was measured using a digital microscope. The topographic data was analysed concerning material distribution and real contact area against smooth surfaces as a function of surface deformations. For contact conditions that are relevant for the skin of patients lying in a hospital bed it was found that the order of magnitude of the ratio of real and apparent contact area between textiles and skin or a mechanical skin model lies between 0.02 and 0.1 and that surface deformations, i.e. penetration of the textile surface asperities into skin or a mechanical skin model, range from 10 to 50µm. The performed analyses of textile 3D surface topographies and comparisons with previous friction measurement results provided information on the relationship between microscopic surface properties and macroscopic friction behaviour of medical textiles. In particular, the new bed sheet was found to be characterised by a trend towards a smaller microscopic contact area (up to a factor of two) and by a larger free interfacial volume (more than a factor of two) in addition to a 1.5 times lower shear strength when in contact with counter-surfaces. The applied methods can be useful to develop improved and skin-adapted materials and surfaces for medical applications. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Dynamics of social contagions with limited contact capacity.

    PubMed

    Wang, Wei; Shu, Panpan; Zhu, Yu-Xiao; Tang, Ming; Zhang, Yi-Cheng

    2015-10-01

    Individuals are always limited by some inelastic resources, such as time and energy, which restrict them to dedicate to social interaction and limit their contact capacities. Contact capacity plays an important role in dynamics of social contagions, which so far has eluded theoretical analysis. In this paper, we first propose a non-Markovian model to understand the effects of contact capacity on social contagions, in which each adopted individual can only contact and transmit the information to a finite number of neighbors. We then develop a heterogeneous edge-based compartmental theory for this model, and a remarkable agreement with simulations is obtained. Through theory and simulations, we find that enlarging the contact capacity makes the network more fragile to behavior spreading. Interestingly, we find that both the continuous and discontinuous dependence of the final adoption size on the information transmission probability can arise. There is a crossover phenomenon between the two types of dependence. More specifically, the crossover phenomenon can be induced by enlarging the contact capacity only when the degree exponent is above a critical degree exponent, while the final behavior adoption size always grows continuously for any contact capacity when degree exponent is below the critical degree exponent.

  19. Capillary spreading of contact line over a sinking sphere

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, Seong Jin; Fezzaa, Kamel; An, Jim

    The contact line dynamics over a sinking solid sphere are investigated in comparison with classical spreading theories. Experimentally, high-speed imaging systems with optical light or x-ray illumination are employed to accurately measure the spreading motion and dynamic contact angle of the contact line. Millimetric spheres are controlled to descend with a constant speed ranging from 7.3 × 10-5 to 0.79 m/s. We observed three different spreading stages over a sinking sphere, which depends on the contact line velocity and contact angle. These stages consistently showed the characteristics of capillarity-driven spreading as the contact line spreads faster with a higher contactmore » angle. The contact line velocity is observed to follow a classical capillary-viscous model at a high Ohnesorge number (> 0.02). For the cases with a relatively low Ohnesorge number (< 0.02), the contact line velocity is significantly lower than the speed predicted by the capillary-viscous balance. This indicates the existence of an additional opposing force (inertia) for a decreasing Ohnesorge number. The capillary-inertial balance is only observed at the very beginning of the capillary rise, in which the maximum velocity is independent of the sphere’s sinking speed. Additionally, we observed the linear relation between the contact line velocity and the sphere sinking speed during the second stage, which represents capillary adjustment by dynamic contact angle.« less

  20. A ROSAT Survey of Contact Binary Stars

    NASA Astrophysics Data System (ADS)

    Geske, M. T.; Gettel, S. J.; McKay, T. A.

    2006-01-01

    Contact binary stars are common variable stars that are all believed to emit relatively large fluxes of X-rays. In this work we combine a large new sample of contact binary stars derived from the ROTSE-I telescope with X-ray data from the ROSAT All Sky Survey (RASS) to estimate the X-ray volume emissivity of contact binary stars in the Galaxy. We obtained X-ray fluxes for 140 contact binaries from the RASS, as well as two additional stars observed by the XMM-Newton observatory. From these data we confirm the emission of X-rays from all contact binary systems, with typical luminosities of approximately 1.0×1030 ergs s-1. Combining calculated luminosities with an estimated contact binary space density, we find that contact binaries do not have strong enough X-ray emission to account for a significant portion of the Galactic X-ray background.

  1. Contact interaction in an unitary ultracold Fermi gas

    DOE PAGES

    Pessoa, Renato; Gandolfi, Stefano; Vitiello, S. A.; ...

    2015-12-16

    An ultracold Fermi atomic gas at unitarity presents universal properties that in the dilute limit can be well described by a contact interaction. By employing a guiding function with correct boundary conditions and making simple modifications to the sampling procedure we are able to calculate the properties of a true contact interaction with the diffusion Monte Carlo method. The results are obtained with small variances. Our calculations for the Bertsch and contact parameters are in excellent agreement with published experiments. The possibility of using a more faithful description of ultracold atomic gases can help uncover additional features of ultracold atomicmore » gases. In addition, this work paves the way to perform quantum Monte Carlo calculations for other systems interacting with contact interactions, where the description using potentials with finite effective range might not be accurate.« less

  2. 40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

  3. 40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

  4. 40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

  5. 40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

  6. 40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

  7. NCRETURN Computer Program for Evaluating Investments Revised to Provide Additional Information

    Treesearch

    Allen L. Lundgren; Dennis L. Schweitzer

    1971-01-01

    Reports a modified version of NCRETURN, a computer program for evauating forestry investments. The revised version, RETURN, provides additional information about each investment, including future net worths and benefit-cost ratios, with no added input.

  8. Contact guidance is cell cycle-dependent.

    PubMed

    Pourfarhangi, Kamyar Esmaeili; De La Hoz, Edgar Cardenas; Cohen, Andrew R; Gligorijevic, Bojana

    2018-09-01

    Cancer cell migration is essential for metastasis, during which cancer cells move through the tumor and reach the blood vessels. In vivo , cancer cells are exposed to contact guidance and chemotactic cues. Depending on the strength of such cues, cells will migrate in a random or directed manner. While similar cues may also stimulate cell proliferation, it is not clear whether cell cycle progression affects migration of cancer cells and whether this effect is different in random versus directed migration. In this study, we tested the effect of cell cycle progression on contact guided migration in 2D and 3D environments, in the breast carcinoma cell line, FUCCI-MDA-MB-231. The results were quantified from live cell microscopy images using the open source lineage editing and validation image analysis tools (LEVER). In 2D, cells were placed inside 10 μ m-wide microchannels to stimulate contact guidance, with or without an additional chemotactic gradient of the soluble epidermal growth factor. In 3D, contact guidance was modeled by aligned collagen fibers. In both 2D and 3D, contact guidance was cell cycle-dependent, while the addition of the chemo-attractant gradient in 2D increased cell velocity and persistence in directionally migrating cells, regardless of their cell cycle phases. In both 2D and 3D contact guidance, cells in the G1 phase of the cell cycle outperformed cells in the S/G2 phase in terms of migration persistence and instantaneous velocity. These data suggest that in the presence of contact guidance cues in vivo , breast carcinoma cells in the G1 phase of the cell cycle may be more efficient in reaching the neighboring vasculature.

  9. Toward patient-specific articular contact mechanics

    PubMed Central

    Ateshian, Gerard A.; Henak, Corinne R.; Weiss, Jeffrey A.

    2015-01-01

    The mechanics of contacting cartilage layers is fundamentally important to understanding the development, homeostasis and pathology of diarthrodial joints. Because of the highly nonlinear nature of both the materials and the contact problem itself, numerical methods such as the finite element method are typically incorporated to obtain solutions. Over the course of five decades, we have moved from an initial qualitative understanding of articular cartilage material behavior to the ability to perform complex, three-dimensional contact analysis, including multiphasic material representations. This history includes the development of analytical and computational contact analysis methods that now provide the ability to perform highly nonlinear analyses. Numerical implementations of contact analysis based on the finite element method are rapidly advancing and will soon enable patient-specific analysis of joint contact mechanics using models based on medical image data. In addition to contact stress on the articular surfaces, these techniques can predict variations in strain and strain through the cartilage layers, providing the basis to predict damage and failure. This opens up exciting areas for future research and application to patient-specific diagnosis and treatment planning applied to a variety of pathologies that affect joint function and cartilage homeostasis. PMID:25698236

  10. Contact and contagion: Probability of transmission given contact varies with demographic state in bighorn sheep

    PubMed Central

    Manlove, Kezia R.; Cassirer, E. Frances; Plowright, Raina K.; Cross, Paul C.; Hudson, Peter J.

    2018-01-01

    Understanding both contact and probability of transmission given contact are key to managing wildlife disease. However, wildlife disease research tends to focus on contact heterogeneity, in part because the probability of transmission given contact is notoriously difficult to measure. Here, we present a first step towards empirically investigating the probability of transmission given contact in free-ranging wildlife.We used measured contact networks to test whether bighorn sheep demographic states vary systematically in infectiousness or susceptibility to Mycoplasma ovipneumoniae, an agent responsible for bighorn sheep pneumonia.We built covariates using contact network metrics, demographic information and infection status, and used logistic regression to relate those covariates to lamb survival. The covariate set contained degree, a classic network metric describing node centrality, but also included covariates breaking the network metrics into subsets that differentiated between contacts with yearlings, ewes with lambs, and ewes without lambs, and animals with and without active infections.Yearlings, ewes with lambs, and ewes without lambs showed similar group membership patterns, but direct interactions involving touch occurred at a rate two orders of magnitude higher between lambs and reproductive ewes than between any classes of adults or yearlings, and one order of magnitude higher than direct interactions between multiple lambs.Although yearlings and non-reproductive bighorn ewes regularly carried M. ovipneumoniae, our models suggest that a contact with an infected reproductive ewe had approximately five times the odds of producing a lamb mortality event of an identical contact with an infected dry ewe or yearling. Consequently, management actions targeting infected animals might lead to unnecessary removal of young animals that carry pathogens but rarely transmit.This analysis demonstrates a simple logistic regression approach for testing a priori

  11. Contact and contagion: Probability of transmission given contact varies with demographic state in bighorn sheep

    USGS Publications Warehouse

    Manlove, Kezia R.; Cassirer, E. Frances; Plowright, Raina K.; Cross, Paul C.; Hudson, Peter J.

    2017-01-01

    Understanding both contact and probability of transmission given contact are key to managing wildlife disease. However, wildlife disease research tends to focus on contact heterogeneity, in part because the probability of transmission given contact is notoriously difficult to measure. Here, we present a first step towards empirically investigating the probability of transmission given contact in free-ranging wildlife.We used measured contact networks to test whether bighorn sheep demographic states vary systematically in infectiousness or susceptibility to Mycoplasma ovipneumoniae, an agent responsible for bighorn sheep pneumonia.We built covariates using contact network metrics, demographic information and infection status, and used logistic regression to relate those covariates to lamb survival. The covariate set contained degree, a classic network metric describing node centrality, but also included covariates breaking the network metrics into subsets that differentiated between contacts with yearlings, ewes with lambs, and ewes without lambs, and animals with and without active infections.Yearlings, ewes with lambs, and ewes without lambs showed similar group membership patterns, but direct interactions involving touch occurred at a rate two orders of magnitude higher between lambs and reproductive ewes than between any classes of adults or yearlings, and one order of magnitude higher than direct interactions between multiple lambs.Although yearlings and non-reproductive bighorn ewes regularly carried M. ovipneumoniae, our models suggest that a contact with an infected reproductive ewe had approximately five times the odds of producing a lamb mortality event of an identical contact with an infected dry ewe or yearling. Consequently, management actions targeting infected animals might lead to unnecessary removal of young animals that carry pathogens but rarely transmit.This analysis demonstrates a simple logistic regression approach for testing

  12. 75 FR 77645 - Agency Information Collection Activities; Proposed Collection; Comment Request; Color Additive...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-13

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0622] Agency Information Collection Activities; Proposed Collection; Comment Request; Color Additive... collection provisions of FDA's regulations governing batch certification of color additives manufactured for...

  13. 77 FR 41370 - Proposed Information Collection; Comment Request; 2013 Alternative Contact Strategy Test

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-13

    ... Alternative Contact Strategy Test AGENCY: U.S. Census Bureau, Commerce. ACTION: Notice. SUMMARY: The...-response. This research will be conducted through a series of projects and tests throughout the decade... 2013 Alternative Contact Strategy Test is the first test to support this research. The Census Bureau...

  14. Shear strength of metal-sapphire contacts

    NASA Technical Reports Server (NTRS)

    Pepper, S. V.

    1976-01-01

    The shear strength of polycrystalline Ag, Cu, Ni, and Fe contacts on clean (0001) sapphire has been studied in ultrahigh vacuum. Both clean metal surfaces and surfaces exposed to O2, Cl2, and C2H4 were used. The results indicate that there are two sources of strength of Al2O3-metal contacts: an intrinsic one that depends on the particular clean metal in contact with Al2O3 and an additional one due to intermediate films. The shear strength of the clean metal contacts correlated directly with the free energy of oxide formation for the lowest metal oxide, in accord with the hypothesis that a chemical bond is formed between metal cations and oxygen anions in the sapphire surface. Contacts formed by metals exposed to chlorine exhibited uniformly low shear strength indicative of van der Waals bonding between chlorinated metal surfaces and sapphire. Contacts formed by metals exposed to oxygen exhibited enhanced shear strength, in accord with the hypothesis that an intermediate oxide layer increases interfacial strength.

  15. EPA Alternative Dispute Resolution Contacts

    EPA Pesticide Factsheets

    The success of EPA's ADR efforts depends on a network of talented and experienced professionals in Headquarters offices and EPA Regions. For Agency-wide ADR information, please contact the Conflict Prevention and Resolution Center.

  16. 77 FR 47361 - Proposed Information Collection; Comment Request; 2013 Alternative Contact Strategy Test

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-08

    ... research will be conducted through a series of projects and tests throughout the decade. Contact involving... 2020 Research and Testing Project tests and design options for the 2020 Census. II. Method of... Alternative Contact Strategy Test is the first test to support this research. The Census Bureau will test...

  17. Shoe allergic contact dermatitis.

    PubMed

    Matthys, Erin; Zahir, Amir; Ehrlich, Alison

    2014-01-01

    Foot dermatitis is a widespread condition, affecting men and women of all ages. Because of the location, this condition may present as a debilitating problem to those who have it. Allergic contact dermatitis involving the feet is frequently due to shoes or socks. The allergens that cause shoe dermatitis can be found in any constituent of footwear, including rubber, adhesives, leather, dyes, metals, and medicaments. The goal of treatment is to identify and minimize contact with the offending allergen(s). The lack of product information released from shoe manufacturers and the continually changing trends in footwear present a challenge in treating this condition. The aim of this study is to review the current literature on allergic contact shoe dermatitis; clinical presentation, allergens, patch testing, and management will be discussed. PubMed and MEDLINE databases were used for the search, with a focus on literature updates from the last 15 years.

  18. ASL or Contact Signing: Issues of Judgment.

    ERIC Educational Resources Information Center

    Lucas, Ceil; Valli, Clayton

    1991-01-01

    Reports on one aspect of an ongoing study of language contact in the American deaf community. The ultimate goal of the study is a linguistic description of contact signing and a reexamination of claims that it is a pidgin. Patterns of language use are reviewed and the role of demographic information in judgments is examined. (29 references) (GLR)

  19. Contact Information for EPA's Office of Transportation and Air Quality

    EPA Pesticide Factsheets

    You will find an EPA employee by name or by topic of interest, also, you will know who to contact if you want to find a specific transportation and air quality document, importing a vehicle to the US, and other frequently asked questions.

  20. Numerical Simulation of Dynamic Contact Angles and Contact Lines in Multiphase Flows using Level Set Method

    NASA Astrophysics Data System (ADS)

    Pendota, Premchand

    Many physical phenomena and industrial applications involve multiphase fluid flows and hence it is of high importance to be able to simulate various aspects of these flows accurately. The Dynamic Contact Angles (DCA) and the contact lines at the wall boundaries are a couple of such important aspects. In the past few decades, many mathematical models were developed for predicting the contact angles of the inter-face with the wall boundary under various flow conditions. These models are used to incorporate the physics of DCA and contact line motion in numerical simulations using various interface capturing/tracking techniques. In the current thesis, a simple approach to incorporate the static and dynamic contact angle boundary conditions using the level set method is developed and implemented in multiphase CFD codes, LIT (Level set Interface Tracking) (Herrmann (2008)) and NGA (flow solver) (Desjardins et al (2008)). Various DCA models and associated boundary conditions are reviewed. In addition, numerical aspects such as the occurrence of a stress singularity at the contact lines and grid convergence of macroscopic interface shape are dealt with in the context of the level set approach.

  1. [Current contact allergens].

    PubMed

    Geier, J; Uter, W; Lessmann, H; Schnuch, A

    2011-10-01

    Ever-changing exposure to contact allergens, partly due to statutory directives (e.g. nickel, chromate, methyldibromo glutaronitrile) or recommendations from industrial associations (e.g. hydroxyisohexyl 3-cyclohexene carboxaldehyde), requires on-going epidemiologic surveillance of contact allergy. In this paper, the current state with special focus in fragrances and preservatives is described on the basis of data of the Information Network of Departments of Dermatology (IVDK) of the year 2010. In 2010, 12,574 patients were patch tested in the dermatology departments belonging to the IVDK. Nickel is still the most frequent contact allergen. However the continuously improved EU nickel directive already has some beneficial effect; sensitization frequency in young women is dropping. In Germany, chromate-reduced cement has been in use now for several years, leading to a decline in chromate sensitization in brick-layers. Two fragrance mixes are part of the German baseline series; they are still relevant. The most important fragrances in these mixes still are oak moss absolute and hydroxyisohexyl 3-cyclohexene carboxaldehyde. However, in relation to these leading allergens, sensitization frequency to other fragrances contained in the mixes seems to be increasing. Among the preservatives, MCI/MI has not lost its importance as contact allergen, in contrast to MDBGN. Sources of MCI/MI sensitization obviously are increasingly found in occupational context. Methylisothiazolinone is a significant allergen in occupational settings, and less frequently in body care products.

  2. 76 FR 70971 - Proposed Information Collection; Comment Request; Societal Response to Tornado Warnings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-16

    ... developing social science, wishes to examine the societal impacts of tornado warnings, specifically the methods of receipt, response, and the impact of false alarms on the rate in which protective actions are... ). FOR FURTHER INFORMATION CONTACT: Requests for additional information or copies of the information...

  3. Pizza makers' contact dermatitis.

    PubMed

    Lembo, Serena; Lembo, Claudio; Patruno, Cataldo; Balato, Anna; Balato, Nicola; Ayala, Fabio

    2014-01-01

    Contact eczema to foods, spices, and food additives can occur in occupational and nonoccupational settings in those who grow, handle, prepare, or cook food. Pizza is one of the most eaten foods in every continent, and pizza making is a common work in many countries. We aimed to evaluate the occurrence and the causes of contact dermatitis in pizza makers in Naples. We performed an observational study in 45 pizza makers: all the enrolled subjects had to answer a questionnaire designed to detect personal history of respiratory or cutaneous allergy, atopy; work characteristics and timing were also investigated. Every subject attended the dermatology clinic for a complete skin examination, and when needed, patients were patch tested using the Italian baseline series of haptens integrated with an arbitrary pizza makers series. Our results reported that 13.3% of the enrolled pizza makers (6/45) presented hand eczema, and that 8.9% (4/45) were affected by occupational allergic contact dermatitis. Diallyl disulfide and ammonium persulfate were the responsible substances. Performing patch tests in pizza makers and food handlers affected by hand contact dermatitis is useful. We propose a specific series of haptens for this wide working category.

  4. Tibiofemoral Contact Mechanics with Horizontal Cleavage Tear and Resection of the Medial Meniscus in the Human Knee.

    PubMed

    Koh, Jason L; Yi, Seung Jin; Ren, Yupeng; Zimmerman, Todd A; Zhang, Li-Qun

    2016-11-02

    The meniscus is known to increase the contact area and decrease contact pressure in the tibiofemoral compartments of the knee. Radial tears of the meniscal root attachment along with partial resections of the torn meniscal tissue decrease the contact area and increase pressure; however, there is a lack of information on the effects of a horizontal cleavage tear (HCT) and partial leaf meniscectomy of such tears on tibiofemoral contact pressure and contact area. Twelve fresh-frozen human cadaveric knees were tested under 10 conditions: 5 serial conditions of posterior medial meniscectomy (intact meniscus, HCT, repaired HCT, inferior leaf resection, and resection of both inferior and superior leaves), each at 2 knee flexion angles (0° and 60°) under an 800-N axial load. Tekscan sensors (model 4000) were used to measure the contact pressure and contact area. HCT and HCT repair resulted in small changes in the contact area and an increase in contact pressure compared with the intact condition. Resection of the inferior leaf resulted in significantly decreased contact area (to a mean 82.3% of the intact condition at 0° of flexion and 81.8% at 60° of flexion; p < 0.05) and increased peak contact pressure (a mean 36.3% increase at 0° flexion and 43.2% increase at 60° flexion; p < 0.05) in the medial compartment. Further resection of the remaining superior leaf resulted in additional significant decreases in contact area (to a mean 60.1% of the intact condition at 0° of flexion and 49.7% at 60° of flexion; p < 0.05) and increases in peak contact pressure (a mean 79.2% increase at 0° of flexion and 74.9% increase at 60° of flexion; p < 0.05). Resection of meniscal tissue forming the inferior leaf of an HCT resulted in substantially decreased contact area and increased contact pressure. Additional resection of the superior leaf resulted in a further significant decrease in contact area and increase in contact pressure in the medial compartment. Repair or minimal

  5. Impact of measurable physical phenomena on contact thermal comfort

    NASA Astrophysics Data System (ADS)

    Fojtlín, Miloš; Pokorný, Jan; Fišer, Jan; Toma, Róbert; Tuhovčák, Ján

    Cabin HVAC (Heating Ventilation and Air-conditioning) systems have become an essential part of personal vehicles as demands for comfortable transport are still rising. In fact, 85 % of the car trips in Europe are shorter than 18 km and last only up to 30 minutes. Under such conditions, the HVAC unit cannot often ensure desired cabin environment and passengers are prone to experience thermal stress. For this reason, additional comfort systems, such as heated or ventilated seats, are available on the market. However, there is no straightforward method to evaluate thermal comfort at the contact surfaces nowadays. The aim of this work is to summarise information about heated and ventilated seats. These technologies use electrical heating and fan driven air to contact area in order to achieve enhanced comfort. It is also expected, that such measures may contribute to lower energy consumption. Yet, in real conditions it is almost impossible to measure the airflow through the ventilated seat directly. Therefore, there is a need for an approach that would correlate measurable physical phenomena with thermal comfort. For this reason, a method that exploits a measurement of temperatures and humidity at the contact area is proposed. Preliminary results that correlate comfort with measurable physical phenomena are demonstrated.

  6. Factors influencing health care workers’ implementation of tuberculosis contact tracing in Kweneng, Botswana

    PubMed Central

    Tlale, Lebapotswe; Frasso, Rosemary; Kgosiesele, Onalenna; Selemogo, Mpho; Mothei, Quirk; Habte, Dereje; Steenhoff, Andrew

    2016-01-01

    Introduction TB contact tracing rates remain low in high burden settings and reasons for this are not well known. We describe factors that influence health care workers' (HCW) implementation of TB contact tracing (CT) in a high TB burden district of Botswana. Methods Data were collected using questionnaires and in-depth interviews in 31 of the 52 health facilities in Kweneng East Health District. Responses were summarized using summary statistics and comparisons between HCW groups were done using parametric or non-parametric tests as per normality of the data distribution. Results One hundred and four HCWs completed questionnaires. Factors that influenced HCW TB contact tracing were their knowledge, attitudes and practices as well as personal factors including decreased motivation and lack of commitment. Patient factors included living further away from the clinic, unknown residential address and high rates of migration and mobility. Administrative factors included staff shortages, lack of transport, poor reporting of TB cases and poor medical infrastructure e.g. suboptimal laboratory services. A national HCW strike and a restructuring of the health system emerged as additional factors during in-depth interviews of TB coordinators. Conclusion Multiple factors lead to poor TB contact tracing in this district. Interventions to increase TB contact tracing will be informed by these findings. PMID:27800084

  7. Factors influencing health care workers' implementation of tuberculosis contact tracing in Kweneng, Botswana.

    PubMed

    Tlale, Lebapotswe; Frasso, Rosemary; Kgosiesele, Onalenna; Selemogo, Mpho; Mothei, Quirk; Habte, Dereje; Steenhoff, Andrew

    2016-01-01

    TB contact tracing rates remain low in high burden settings and reasons for this are not well known. We describe factors that influence health care workers' (HCW) implementation of TB contact tracing (CT) in a high TB burden district of Botswana. Data were collected using questionnaires and in-depth interviews in 31 of the 52 health facilities in Kweneng East Health District. Responses were summarized using summary statistics and comparisons between HCW groups were done using parametric or non-parametric tests as per normality of the data distribution. One hundred and four HCWs completed questionnaires. Factors that influenced HCW TB contact tracing were their knowledge, attitudes and practices as well as personal factors including decreased motivation and lack of commitment. Patient factors included living further away from the clinic, unknown residential address and high rates of migration and mobility. Administrative factors included staff shortages, lack of transport, poor reporting of TB cases and poor medical infrastructure e.g. suboptimal laboratory services. A national HCW strike and a restructuring of the health system emerged as additional factors during in-depth interviews of TB coordinators. Multiple factors lead to poor TB contact tracing in this district. Interventions to increase TB contact tracing will be informed by these findings.

  8. Acceptability of chemoprophylaxis for household contacts of leprosy patients in Bangladesh: a qualitative study.

    PubMed

    Feenstra, Sabiena G; Nahar, Quamrun; Pahan, David; Oskam, Linda; Richardus, Jan Hendrik

    2011-06-01

    Chemoprophylaxis with single dose rifampicin is a promising intervention to prevent leprosy in close contacts of patients. However, application in control programmes often requires disclosure of the leprosy diagnosis, which is still a stigmatised disease in many countries. Promoting control and treatment of stigmatised diseases without contributing towards stigma of the individuals involved can be very difficult. The objective of this study was to assess the social acceptability of disclosure of the diagnosis and the attitude towards taking prophylactic medicines in a leprosy endemic area in Bangladesh. Qualitative study through focus group discussions with 136 healthy men and women from different age groups and religions, coming from two rural villages and an urban area in northwest Bangladesh, and 14 health workers with extensive experience with leprosy patients. The participants would not object to disclosure of the diagnosis to household members and nearby family if they were diagnosed with leprosy. However, many participants were not willing to share this information with their neighbours and other social contacts due to stigma of the disease. All healthy participants were willing to take chemoprophylaxis if any of their close contacts were diagnosed with leprosy, even after explaining that full protection against leprosy was not guaranteed. It can be concluded that chemoprophylaxis for household contacts of leprosy patients is an effective and socially acceptable addition to the current leprosy control programme. Chemoprophylaxis for other categories of contacts likely to benefit would only be feasible, without disclosure of patient information, if given in the form of mass campaigns for the whole population in the area.

  9. Occupational Airborne Contact Dermatitis From Proton Pump Inhibitors.

    PubMed

    DeKoven, Joel G; Yu, Ashley M

    2015-01-01

    Few published reports have described occupational contact dermatitis from proton pump inhibitor (PPI) exposure in the literature. We present an additional case of a 58-year-old male pharmaceutical worker with an occupational airborne allergic contact dermatitis to PPIs confirmed by patch testing. This is a novel report of workplace exposure to dexlansoprazole and esomeprazole PPIs with resultant clinical contact allergy and relevant positive patch test results to these 2 agents. A literature review of all previously reported cases of occupational contact dermatitis to PPI is summarized. The case also emphasizes the importance of even minute exposures when considering workplace accommodation.

  10. Wound-Related Allergic/Irritant Contact Dermatitis.

    PubMed

    Alavi, Afsaneh; Sibbald, R Gary; Ladizinski, Barry; Saraiya, Ami; Lee, Kachiu C; Skotnicki-Grant, Sandy; Maibach, Howard

    2016-06-01

    To provide information from a literature review about the prevention, recognition, and treatment for contact dermatitis. This continuing education activity is intended for physicians and nurses with an interest in skin and wound care. After participating in this educational activity, the participant should be better able to:1. Identify signs and symptoms of and diagnostic measures for contact dermatitis.2. Identify causes and risks for contact dermatitis.3. Select appropriate treatment for contact dermatitis and its prevention. Contact dermatitis to wound care products is a common, often neglected problem. A review was conducted to identify articles relevant to contact dermatitis.A PubMed English-language literature review was conducted for appropriate articles published between January 2000 and December 2015.Contact dermatitis is both irritant (80% of cases) or allergic (20% of cases). Frequent use of potential contact allergens and impaired barrier function of the skin can lead to rising sensitization in patients with chronic wounds. Common known allergens to avoid in wound care patients include fragrances, colophony, lanolin, and topical antibiotics.Clinicians should be cognizant of the allergens in wound care products and the potential for sensitization. All medical devices, including wound dressings, adhesives, and bandages, should be labeled with their complete ingredients, and manufacturers should be encouraged to remove common allergens from wound care products, including topical creams, ointments, and dressings.

  11. Contact EPA Pacific Southwest (Region 9)

    EPA Pesticide Factsheets

    Contact EPA Region 9, Pacific Southwest: 24-hour report of violations and emergencies, environmental complaint tip line, Environmental Information Center, Library, Reception, Employee Locator, Media, Press, Public Affairs.

  12. Contact material optimization and contact physics in metal-contact microelectromechanical systems (MEMS) switches

    NASA Astrophysics Data System (ADS)

    Yang, Zhenyin

    Metal-contact MEMS switches hold great promise for implementing agile radio frequency (RF) systems because of their small size, low fabrication cost, low power consumption, wide operational band, excellent isolation and exceptionally low signal insertion loss. Gold is often utilized as a contact material for metal-contact MEMS switches due to its excellent electrical conductivity and corrosion resistance. However contact wear and stiction are the two major failure modes for these switches due to its material softness and high surface adhesion energy. To strengthen the contact material, pure gold was alloyed with other metal elements. We designed and constructed a new micro-contacting test facility that closely mimic the typical MEMS operation and utilized this facility to efficiently evaluate optimized contact materials. Au-Ni binary alloy system as the candidate contact material for MEMS switches was systematically investigated. A correlation between contact material properties (etc. microstructure, micro-hardness, electrical resistivity, topology, surface structures and composition) and micro-contacting performance was established. It was demonstrated nano-scale graded two-phase Au-Ni film could possibly yield an improved device performance. Gold micro-contact degradation mechanisms were also systematically investigated by running the MEMS switching tests under a wide range of test conditions. According to our quantitative failure analysis, field evaporation could be the dominant failure mode for highfield (> critical threshold field) hot switching; transient thermal-assisted wear could be the dominant failure mode for low-field hot switching; on the other hand, pure mechanical wear and steady current heating (1 mA) caused much less contact degradation in cold switching tests. Results from low-force (50 muN/micro-contact), low current (0.1 mA) tests on real MEMS switches indicated that continuous adsorbed films from ambient air could degrade the switch contact

  13. [Information value of "additional tasks" method to evaluate pilot's work load].

    PubMed

    Gorbunov, V V

    2005-01-01

    "Additional task" method was used to evaluate pilot's work load in prolonged flight. Calculated through durations of latent periods of motor responses, quantitative criterion of work load is more informative for objective evaluation of pilot's involvement in his piloting functions rather than of other registered parameters.

  14. Scientific Challenges in the Risk Assessment of Food Contact Materials.

    PubMed

    Muncke, Jane; Backhaus, Thomas; Geueke, Birgit; Maffini, Maricel V; Martin, Olwenn Viviane; Myers, John Peterson; Soto, Ana M; Trasande, Leonardo; Trier, Xenia; Scheringer, Martin

    2017-09-11

    Food contact articles (FCAs) are manufactured from food contact materials (FCMs) that include plastics, paper, metal, glass, and printing inks. Chemicals can migrate from FCAs into food during storage, processing, and transportation. Food contact materials' safety is evaluated using chemical risk assessment (RA). Several challenges to the RA of FCAs exist. We review regulatory requirements for RA of FCMs in the United States and Europe, identify gaps in RA, and highlight opportunities for improving the protection of public health. We intend to initiate a discussion in the wider scientific community to enhance the safety of food contact articles. Based on our evaluation of the evidence, we conclude that current regulations are insufficient for addressing chemical exposures from FCAs. RA currently focuses on monomers and additives used in the manufacture of products, but it does not cover all substances formed in the production processes. Several factors hamper effective RA for many FCMs, including a lack of information on chemical identity, inadequate assessment of hazardous properties, and missing exposure data. Companies make decisions about the safety of some food contact chemicals (FCCs) without review by public authorities. Some chemical migration limits cannot be enforced because analytical standards are unavailable. We think that exposures to hazardous substances migrating from FCAs require more attention. We recommend a ) limiting the number and types of chemicals authorized for manufacture and b ) developing novel approaches for assessing the safety of chemicals in FCAs, including unidentified chemicals that form during or after production. https://doi.org/10.1289/EHP644.

  15. Scientific Challenges in the Risk Assessment of Food Contact Materials

    PubMed Central

    Backhaus, Thomas; Geueke, Birgit; Maffini, Maricel V.; Martin, Olwenn Viviane; Myers, John Peterson; Soto, Ana M.; Trasande, Leonardo; Trier, Xenia; Scheringer, Martin

    2017-01-01

    Background: Food contact articles (FCAs) are manufactured from food contact materials (FCMs) that include plastics, paper, metal, glass, and printing inks. Chemicals can migrate from FCAs into food during storage, processing, and transportation. Food contact materials’ safety is evaluated using chemical risk assessment (RA). Several challenges to the RA of FCAs exist. Objectives: We review regulatory requirements for RA of FCMs in the United States and Europe, identify gaps in RA, and highlight opportunities for improving the protection of public health. We intend to initiate a discussion in the wider scientific community to enhance the safety of food contact articles. Discussion: Based on our evaluation of the evidence, we conclude that current regulations are insufficient for addressing chemical exposures from FCAs. RA currently focuses on monomers and additives used in the manufacture of products, but it does not cover all substances formed in the production processes. Several factors hamper effective RA for many FCMs, including a lack of information on chemical identity, inadequate assessment of hazardous properties, and missing exposure data. Companies make decisions about the safety of some food contact chemicals (FCCs) without review by public authorities. Some chemical migration limits cannot be enforced because analytical standards are unavailable. Conclusion: We think that exposures to hazardous substances migrating from FCAs require more attention. We recommend a) limiting the number and types of chemicals authorized for manufacture and b) developing novel approaches for assessing the safety of chemicals in FCAs, including unidentified chemicals that form during or after production. https://doi.org/10.1289/EHP644 PMID:28893723

  16. A Location Aware Middleware Framework for Collaborative Visual Information Discovery and Retrieval

    DTIC Science & Technology

    2017-09-14

    Information Discovery and Retrieval Andrew J.M. Compton Follow this and additional works at: https://scholar.afit.edu/etd Part of the Digital...and Dissertations by an authorized administrator of AFIT Scholar. For more information , please contact richard.mansfield@afit.edu. Recommended Citation...

  17. 77 FR 60022 - Proposed Collection; Comment Request for Information Collection Tools

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-01

    ... Information Collection Tools AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and request for... C (Form 1040), Profit or Loss From Business; Form 8907, Nonconventional Source Fuel Credit; and REG... CONTACT: Requests for additional information or copies of the collection tools should be directed to R...

  18. Contact effects analyzed by a parameter extraction method based on a single bottom-gate/top-contact organic thin-film transistor

    NASA Astrophysics Data System (ADS)

    Takagaki, Shunsuke; Yamada, Hirofumi; Noda, Kei

    2018-03-01

    Contact effects in organic thin-film transistors (OTFTs) were examined by using our previously proposed parameter extraction method from the electrical characteristics of a single staggered-type device. Gate-voltage-dependent contact resistance and channel mobility in the linear regime were evaluated for bottom-gate/top-contact (BGTC) pentacene TFTs with active layers of different thicknesses, and for pentacene TFTs with contact-doped layers prepared by coevaporation of pentacene and tetrafluorotetracyanoquinodimethane (F4TCNQ). The extracted parameters suggested that the influence of the contact resistance becomes more prominent with the larger active-layer thickness, and that contact-doping experiments give rise to a drastic decrease in the contact resistance and a concurrent considerable improvement in the channel mobility. Additionally, the estimated energy distributions of trap density in the transistor channel probably reflect the trap filling with charge carriers injected into the channel regions. The analysis results in this study confirm the effectiveness of our proposed method, with which we can investigate contact effects and circumvent the influences of characteristic variations in OTFT fabrication.

  19. 75 FR 70924 - Office of the National Coordinator for Health Information Technology; HIT Policy Committee's...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-19

    ... Team, Enrollment, Governance, Adoption/ Certification, and Information Exchange workgroups. General... the electronic exchange and use of health information as is consistent with the Federal Health IT... site for additional information or revised schedules as it becomes available. Contact Person: Judy...

  20. Modeling the emergence of contact languages.

    PubMed

    Tria, Francesca; Servedio, Vito D P; Mufwene, Salikoko S; Loreto, Vittorio

    2015-01-01

    Contact languages are born out of the non-trivial interaction of two (or more) parent languages. Nowadays, the enhanced possibility of mobility and communication allows for a strong mixing of languages and cultures, thus raising the issue of whether there are any pure languages or cultures that are unaffected by contact with others. As with bacteria or viruses in biological evolution, the evolution of languages is marked by horizontal transmission; but to date no reliable quantitative tools to investigate these phenomena have been available. An interesting and well documented example of contact language is the emergence of creole languages, which originated in the contacts of European colonists and slaves during the 17th and 18th centuries in exogenous plantation colonies of especially the Atlantic and Indian Ocean. Here, we focus on the emergence of creole languages to demonstrate a dynamical process that mimics the process of creole formation in American and Caribbean plantation ecologies. Inspired by the Naming Game (NG), our modeling scheme incorporates demographic information about the colonial population in the framework of a non-trivial interaction network including three populations: Europeans, Mulattos/Creoles, and Bozal slaves. We show how this sole information makes it possible to discriminate territories that produced modern creoles from those that did not, with a surprising accuracy. The generality of our approach provides valuable insights for further studies on the emergence of languages in contact ecologies as well as to test specific hypotheses about the peopling and the population structures of the relevant territories. We submit that these tools could be relevant to addressing problems related to contact phenomena in many cultural domains: e.g., emergence of dialects, language competition and hybridization, globalization phenomena.

  1. Modeling the Emergence of Contact Languages

    PubMed Central

    Tria, Francesca; Servedio, Vito D.P.; Mufwene, Salikoko S.; Loreto, Vittorio

    2015-01-01

    Contact languages are born out of the non-trivial interaction of two (or more) parent languages. Nowadays, the enhanced possibility of mobility and communication allows for a strong mixing of languages and cultures, thus raising the issue of whether there are any pure languages or cultures that are unaffected by contact with others. As with bacteria or viruses in biological evolution, the evolution of languages is marked by horizontal transmission; but to date no reliable quantitative tools to investigate these phenomena have been available. An interesting and well documented example of contact language is the emergence of creole languages, which originated in the contacts of European colonists and slaves during the 17th and 18th centuries in exogenous plantation colonies of especially the Atlantic and Indian Ocean. Here, we focus on the emergence of creole languages to demonstrate a dynamical process that mimics the process of creole formation in American and Caribbean plantation ecologies. Inspired by the Naming Game (NG), our modeling scheme incorporates demographic information about the colonial population in the framework of a non-trivial interaction network including three populations: Europeans, Mulattos/Creoles, and Bozal slaves. We show how this sole information makes it possible to discriminate territories that produced modern creoles from those that did not, with a surprising accuracy. The generality of our approach provides valuable insights for further studies on the emergence of languages in contact ecologies as well as to test specific hypotheses about the peopling and the population structures of the relevant territories. We submit that these tools could be relevant to addressing problems related to contact phenomena in many cultural domains: e.g., emergence of dialects, language competition and hybridization, globalization phenomena. PMID:25875371

  2. 77 FR 13366 - Compliance Assistance Resources and Points of Contact Available to Small Businesses

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-06

    ... OFFICE OF MANAGEMENT AND BUDGET Compliance Assistance Resources and Points of Contact Available to... available to small businesses'' and a list of the points of contacts in agencies ``to act as a liaison... FURTHER INFORMATION CONTACT: Wendy Liberante, Office of Information and Regulatory Affairs, Office of...

  3. Contact and contagion: Probability of transmission given contact varies with demographic state in bighorn sheep.

    PubMed

    Manlove, Kezia R; Cassirer, E Frances; Plowright, Raina K; Cross, Paul C; Hudson, Peter J

    2017-07-01

    Understanding both contact and probability of transmission given contact are key to managing wildlife disease. However, wildlife disease research tends to focus on contact heterogeneity, in part because the probability of transmission given contact is notoriously difficult to measure. Here, we present a first step towards empirically investigating the probability of transmission given contact in free-ranging wildlife. We used measured contact networks to test whether bighorn sheep demographic states vary systematically in infectiousness or susceptibility to Mycoplasma ovipneumoniae, an agent responsible for bighorn sheep pneumonia. We built covariates using contact network metrics, demographic information and infection status, and used logistic regression to relate those covariates to lamb survival. The covariate set contained degree, a classic network metric describing node centrality, but also included covariates breaking the network metrics into subsets that differentiated between contacts with yearlings, ewes with lambs, and ewes without lambs, and animals with and without active infections. Yearlings, ewes with lambs, and ewes without lambs showed similar group membership patterns, but direct interactions involving touch occurred at a rate two orders of magnitude higher between lambs and reproductive ewes than between any classes of adults or yearlings, and one order of magnitude higher than direct interactions between multiple lambs. Although yearlings and non-reproductive bighorn ewes regularly carried M. ovipneumoniae, our models suggest that a contact with an infected reproductive ewe had approximately five times the odds of producing a lamb mortality event of an identical contact with an infected dry ewe or yearling. Consequently, management actions targeting infected animals might lead to unnecessary removal of young animals that carry pathogens but rarely transmit. This analysis demonstrates a simple logistic regression approach for testing a priori

  4. Contact dermatitis in students practicing sports: incidence of rubber sensitisation.

    PubMed

    Ventura, M T; Dagnello, M; Matino, M G; Di Corato, R; Giuliano, G; Tursi, A

    2001-04-01

    Over the last few years, changes in cutaneous homoeostasis resulting from sports activities have been reported. In particular, alterations in sweating mechanisms, the hydrolipid barrier, and surface bacterial flora, together with exposure to atmospheric conditions and the need to use medicaments, detergents, and other topical substances, predispose subjects to allergic contact dermatitis. To evaluate the incidence of allergic contact dermatitis in a group of young people practising sports activities. Patch tests were performed to confirm the diagnosis of irritant or allergic dermatitis; in addition, the radioallergoabsorbent test (RAST) to latex was evaluated in the group studied. Allergic contact dermatitis caused by thiourams (23.3%) and mercaptobenzothiazole (20.9%) was prevalent. Other haptens, such as benzocaine and nickel, which are contained in clothing, equipment, topical medicaments, and creams used for massage, were also allergenic. In two cases, RAST positivity to latex was registered. -The results suggest that close contact with sports equipment may increase the incidence of allergic contact dermatitis. Students practising certain sports may have "professional" allergic contact dermatitis to additives used in the production of rubber.

  5. 43 CFR 3515.23 - May BLM require me to submit additional information?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... require me to submit additional information? Yes. You must be willing to provide geologic and economic data we need to determine the fair market value of your preference right or lease to be relinquished. ...

  6. In Vivo Measurement of Glenohumeral Joint Contact Patterns

    NASA Astrophysics Data System (ADS)

    Bey, Michael J.; Kline, Stephanie K.; Zauel, Roger; Kolowich, Patricia A.; Lock, Terrence R.

    2009-12-01

    The objectives of this study were to describe a technique for measuring in-vivo glenohumeral joint contact patterns during dynamic activities and to demonstrate application of this technique. The experimental technique calculated joint contact patterns by combining CT-based 3D bone models with joint motion data that were accurately measured from biplane x-ray images. Joint contact patterns were calculated for the repaired and contralateral shoulders of 20 patients who had undergone rotator cuff repair. Significant differences in joint contact patterns were detected due to abduction angle and shoulder condition (i.e., repaired versus contralateral). Abduction angle had a significant effect on the superior/inferior contact center position, with the average joint contact center of the repaired shoulder 12.1% higher on the glenoid than the contralateral shoulder. This technique provides clinically relevant information by calculating in-vivo joint contact patterns during dynamic conditions and overcomes many limitations associated with conventional techniques for quantifying joint mechanics.

  7. The impact of multiple information on coupled awareness-epidemic dynamics in multiplex networks

    NASA Astrophysics Data System (ADS)

    Pan, Yaohui; Yan, Zhijun

    2018-02-01

    Growing interest has emerged in the study of the interplay between awareness and epidemics in multiplex networks. However, previous studies on this issue usually assume that all aware individuals take the same level of precautions, ignoring individual heterogeneity. In this paper, we investigate the coupled awareness-epidemic dynamics in multiplex networks considering individual heterogeneity. Here, the precaution levels are heterogeneous and depend on three types of information: contact information and local and global prevalence information. The results show that contact-based precautions can decrease the epidemic prevalence and augment the epidemic threshold, but prevalence-based precautions, regardless of local or global information, can only decrease the epidemic prevalence. Moreover, unlike previous studies in single-layer networks, we do not find a greater impact of local prevalence information on the epidemic prevalence compared to global prevalence information. In addition, we find that the altruistic behaviors of infected individuals can effectively suppress epidemic spreading, especially when the level of contact-based precaution is high.

  8. 49 CFR 40.331 - To what additional parties must employers and service agents release information?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... service agents release information? 40.331 Section 40.331 Transportation Office of the Secretary of... Release of Information § 40.331 To what additional parties must employers and service agents release information? As an employer or service agent you must release information under the following circumstances...

  9. Household knowledge, attitudes and practices related to pet contact and associated zoonoses in Ontario, Canada

    PubMed Central

    2012-01-01

    Background Many human infections are transmitted through contact with animals (zoonoses), including household pets. Although pet ownership is common in most countries and non-pet owners may have frequent contact with pets, there is limited knowledge of the public’s pet contact practices and awareness of zoonotic disease risks from pets. The objective of this study was to characterize the general public’s knowledge, attitudes and risks related to pet ownership and animal contact in southern Ontario, Canada. Methods A self-administered questionnaire was distributed to individuals at two multi-physician clinics in Waterloo, Ontario, Canada during 2010. A single adult from each household was invited to participate in the study. Results Seventy five percent (641/853) of individuals approached completed the questionnaire. Pet ownership and contact were common; 64% of participants had a pet in their household and 37% of non-pet owning households had a member with at least weekly animal contact outside the home. Pet ownership was high (55%) for households with individuals at higher risk for infections (i.e., < 5 yrs, ≥ 65 yrs, immunocompromised). Most respondents (64%) indicated that they had never received information regarding pet-associated disease risks. When given a list of 11 infectious pathogens, respondents were only able to correctly classify just over half on their potential to be transmitted from pets to people (mean 6.4); independently, pet owners and those who recalled receiving information in the past about this topic were able to make significantly more correct identifications. Pet (36%) and non-pet owning households (10%) reported dog or cat bites or scratches during the preceding year. Households with individuals at higher risk for an infection did not differ from the remaining households regarding their perceived disease risk of pets, zoonotic disease knowledge, recall of being asked by their medical provider if they owned any pets, or recall of

  10. 20 CFR 30.518 - Can OWCP require the recipient of the overpayment to submit additional financial information?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... overpayment to submit additional financial information? 30.518 Section 30.518 Employees' Benefits OFFICE OF... OWCP require the recipient of the overpayment to submit additional financial information? (a) The... specified by OWCP. This information is needed to determine whether or not recovery of an overpayment would...

  11. 20 CFR 30.518 - Can OWCP require the recipient of the overpayment to submit additional financial information?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... overpayment to submit additional financial information? 30.518 Section 30.518 Employees' Benefits OFFICE OF... OWCP require the recipient of the overpayment to submit additional financial information? (a) The... specified by OWCP. This information is needed to determine whether or not recovery of an overpayment would...

  12. 20 CFR 30.518 - Can OWCP require the recipient of the overpayment to submit additional financial information?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... overpayment to submit additional financial information? 30.518 Section 30.518 Employees' Benefits OFFICE OF... OWCP require the recipient of the overpayment to submit additional financial information? (a) The... specified by OWCP. This information is needed to determine whether or not recovery of an overpayment would...

  13. Dynamics of the Molten Contact Line

    NASA Technical Reports Server (NTRS)

    Sonin, Ain A.; Schiaffino, Stefano

    1996-01-01

    In contrast to the ordinary contact line problem, virtually no information is available on the similar problem associated with a molten material spreading on a solid which is below the melt's fusion point. The latter is a more complex problem which heat transfer and solidification take place simultaneously with spreading, and requires answers not only for the hot melt's advance speed over the cold solid as a function of contact angle, but also for how one is to predict the point of the molten contact line's arrest by freezing. This issues are of importance in evolving methods of materials processing. The purpose of our work is to develop, based on both experiments and theory, an understanding of the dynamic processes that occur when a molten droplet touches a subcooled solid, spreads partly over it by capillary action, and freezes. We seek answers to the following basic questions. First, what is the relationship between the melt's contact line speed and the apparent (dynamic) contact angle? Secondly, at what point will the contact line modon be arrested by freezing? The talk will describe three components of our work: (1) deposition experiments with small molten droplets; (2) investigation of the dynamics of the molten contact line by means of a novel forced spreading method; and (3) an attempt to provide a theoretical framework for answering the basic questions posed above.

  14. Potential hazards due to food additives in oral hygiene products.

    PubMed

    Tuncer Budanur, Damla; Yas, Murat Cengizhan; Sepet, Elif

    2016-01-01

    Food additives used to preserve flavor or to enhance the taste and appearance of foods are also available in oral hygiene products. The aim of this review is to provide information concerning food additives in oral hygiene products and their adverse effects. A great many of food additives in oral hygiene products are potential allergens and they may lead to allergic reactions such as urticaria, contact dermatitis, rhinitis, and angioedema. Dental practitioners, as well as health care providers, must be aware of the possibility of allergic reactions due to food additives in oral hygiene products. Proper dosage levels, delivery vehicles, frequency, potential benefits, and adverse effects of oral health products should be explained completely to the patients. There is a necessity to raise the awareness among dental professionals on this subject and to develop a data gathering system for possible adverse reactions.

  15. 76 FR 41515 - Proclaiming Certain Lands, Community College Campus, as an Addition to the Bay Mills Indian...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-14

    ... Campus, as an Addition to the Bay Mills Indian Community of Michigan AGENCY: Bureau of Indian Affairs... Mills Indian Community of Michigan. FOR FURTHER INFORMATION CONTACT: Ben Burshia, Bureau of Indian... and part of the Bay Mills Indian Community of Michigan for the exclusive use of Indians on that...

  16. Class Racial Composition, the Friendliness of Interracial Contact and Student Performance.

    ERIC Educational Resources Information Center

    Patchen, Martin; And Others

    This paper presents further evidence bearing on the hypothesis that the academic performance of students is associated more closely with the friendliness or unfriendliness of interracial contact than with the sheer opportunity for interracial contact. In addition, evidence is presented concerning the relationship of interracial contact and of…

  17. Gallate Contact Dermatitis: Product Update and Systematic Review.

    PubMed

    Holcomb, Zachary E; Van Noord, Megan G; Atwater, Amber Reck

    Allergic contact dermatitis related to cosmetic use can result from allergens not routinely evaluated by standard patch test protocols. Propyl, octyl, and dodecyl gallates are commonly used antioxidant preservatives with reports of associated allergic contact dermatitis in the literature. The objectives of this review were to investigate the role of gallates in allergic contact dermatitis and to explore products containing these preservatives. A systematic review of the literature through April 2016 was performed to explore cases of reported gallate allergy. Food and cosmetic product databases were searched for products containing gallates. Seventy-four cases of gallate contact allergy have been reported. In addition, a variety of commercially available cosmetic products and foods contain gallate chemicals. Propyl gallate is the most commonly reported gallate contact allergen and often causes facial and/or hand dermatitis.

  18. [Epidemiologic surveillance of contact allergens. The "monitoring series" of IVDK (Information Network ofDermatologic Clinics for Detection and Scientific Evaluation of Contact Allergy].

    PubMed

    Aberer, W; Komericki, P; Uter, W; Hausen, B M; Lessmann, H; Kränke, B; Geier, J; Schnuch, A

    2003-08-01

    The selection of the most important contact allergens is subject to a continuous change. Several factors may influence the sensitization rates and thus the decision, which substances to include in the standard series of the most frequent allergens. The Information Network of Departments of Dermatology adds substances of interest for a certain time period to the standard series in order to evaluate parameters such as sensitization rate, grade of reaction, and clinical relevance of positive reactions. In 6 testing periods starting in 1996, 13 test substances were evaluated. Due to the results, propolis, compositae mix, and bufexamac were included in the standard series in 1999, while lyral was added in 2002. Sorbitansesquioleat, dispers blue mix, and iodopropynyl butylcarbamate are under further discussion. Substances such as glutaraldehyde and p-aminoazobenzole should be tested in certain risk groups only, whereas the steroids budesonide and tixocortol should be tested when clinically suspected.

  19. MolProbity: all-atom contacts and structure validation for proteins and nucleic acids

    PubMed Central

    Davis, Ian W.; Leaver-Fay, Andrew; Chen, Vincent B.; Block, Jeremy N.; Kapral, Gary J.; Wang, Xueyi; Murray, Laura W.; Arendall, W. Bryan; Snoeyink, Jack; Richardson, Jane S.; Richardson, David C.

    2007-01-01

    MolProbity is a general-purpose web server offering quality validation for 3D structures of proteins, nucleic acids and complexes. It provides detailed all-atom contact analysis of any steric problems within the molecules as well as updated dihedral-angle diagnostics, and it can calculate and display the H-bond and van der Waals contacts in the interfaces between components. An integral step in the process is the addition and full optimization of all hydrogen atoms, both polar and nonpolar. New analysis functions have been added for RNA, for interfaces, and for NMR ensembles. Additionally, both the web site and major component programs have been rewritten to improve speed, convenience, clarity and integration with other resources. MolProbity results are reported in multiple forms: as overall numeric scores, as lists or charts of local problems, as downloadable PDB and graphics files, and most notably as informative, manipulable 3D kinemage graphics shown online in the KiNG viewer. This service is available free to all users at http://molprobity.biochem.duke.edu. PMID:17452350

  20. Children’s Contact With Their Incarcerated Parents

    PubMed Central

    Poehlmann, Julie; Dallaire, Danielle; Loper, Ann Booker; Shear, Leslie D.

    2014-01-01

    Approximately 1.7 million children have parents who are incarcerated in prison in the United States, and possibly millions of additional children have a parent incarcerated in jail. Many affected children experience increased risk for developing behavior problems, academic failure, and substance abuse. For a growing number of children, incarcerated parents, caregivers, and professionals, parent– child contact during the imprisonment period is a key issue. In this article, we present a conceptual model to provide a framework within which to interpret findings about parent– child contact when parents are incarcerated. We then summarize recent research examining parent–child contact in context. On the basis of the research reviewed, we present initial recommendations for children’s contact with incarcerated parents and also suggest areas for future intervention and research with this vulnerable population. PMID:20822198

  1. Protein contact dermatitis: allergens, pathogenesis, and management.

    PubMed

    Levin, Cheryl; Warshaw, Erin

    2008-01-01

    Protein contact dermatitis is an allergic skin reaction induced principally by proteins of either animal or plant origin. The clinical presentation is that of a chronic dermatitis, and it is often difficult to differentiate between allergic contact dermatitis and other eczematous dermatoses. One distinguishing clinical feature is that acute flares of pruritus, urticaria, edema, or vesiculation are noted minutes after contact with the causative substances. Additionally, the patch-test result is typically negative, and the scratch- or prick-test result is positive. The pathogenesis of protein contact dermatitis is unclear but may involve a type I (immunoglobulin E [IgE], immediate) hypersensitivity reaction, type IV (cell-mediated delayed) hypersensitivity reaction, and/or a delayed reaction due to IgE-bearing Langerhans' cells. Management involves avoidance of the allergen.

  2. [Sport injuries in full contact and semi-contact karate].

    PubMed

    Greier, K; Riechelmann, H; Ziemska, J

    2014-03-01

    Karate enjoys great popularity both in professional and recreational sports and can be classified into full, half and low contact styles. The aim of this study was the analysis of sports injuries in Kyokushinkai (full contact) and traditional Karate (semi-contact). In a retrospective study design, 215 active amateur karateka (114 full contact, 101 semi-contact) were interviewed by means of a standardised questionnaire regarding typical sport injuries during the last 36 months. Injuries were categorised into severity grade I (not requiring medical treatment), grade II (single medical treatment), grade III (several outpatient medical treatments) and grade IV (requiring hospitalisation). In total, 217 injuries were reported in detail. 125 injuries (58%) occurred in full contact and 92 (42%) in semi-contact karate. The time related injury rate of full contact karateka was 1.9/1000 h compared to 1.3/1000 h of semi-contact karateka (p < 0.05). The most common types of injuries were musculoskeletal contusions (33% full contact, 20% semi-contact), followed by articular sprains with 19% and 16%. The lower extremity was affected twice as often in full contact (40%) as in semi-contact (20%) karate. Training injuries were reported by 80% of the full contact and 77% of the semi-contact karateka. Most injuries, both in training and competition, occurred in kumite. 75% of the reported injuries of full contact and 70% of semi-contact karateka were classified as low grade (I or II). The high rate of injuries during training and kumite (sparring) points to specific prevention goals. The emphasis should be put on proprioceptive training and consistent warm-up. In the actual competition the referees play a vital role regarding prevention. © Georg Thieme Verlag KG Stuttgart · New York.

  3. Contact detection for nanomanipulation in a scanning electron microscope.

    PubMed

    Ru, Changhai; To, Steve

    2012-07-01

    Nanomanipulation systems require accurate knowledge of the end-effector position in all three spatial coordinates, XYZ, for reliable manipulation of nanostructures. Although the images acquired by a scanning electron microscope (SEM) provide high resolution XY information, the lack of depth information in the Z-direction makes 3D nanomanipulation time-consuming. Existing approaches for contact detection of end-effectors inside SEM typically utilize fragile touch sensors that are difficult to integrate into a nanomanipulation system. This paper presents a method for determining the contact between an end-effector and a target surface during nanomanipulation inside SEM, purely based on the processing of SEM images. A depth-from-focus method is used in the fast approach of the end-effector to the substrate, followed by fine contact detection. Experimental results demonstrate that the contact detection approach is capable of achieving an accuracy of 21.5 nm at 50,000× magnification while inducing little end-effector damage. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. 77 FR 24628 - World Trade Center Health Program Requirements for the Addition of New WTC-Related Health Conditions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-25

    ... World Trade Center Health Program Requirements for the Addition of New WTC-Related Health Conditions...) to establish the World Trade Center (WTC) Health Program. Sections 3311, 3312, and 3321 of Title..., 2012. FOR FURTHER INFORMATION CONTACT: Roy M. Fleming, Sc.D., Senior Science Advisor, World Trade...

  5. Predicting helix–helix interactions from residue contacts in membrane proteins

    PubMed Central

    Lo, Allan; Chiu, Yi-Yuan; Rødland, Einar Andreas; Lyu, Ping-Chiang; Sung, Ting-Yi; Hsu, Wen-Lian

    2009-01-01

    Motivation: Helix–helix interactions play a critical role in the structure assembly, stability and function of membrane proteins. On the molecular level, the interactions are mediated by one or more residue contacts. Although previous studies focused on helix-packing patterns and sequence motifs, few of them developed methods specifically for contact prediction. Results: We present a new hierarchical framework for contact prediction, with an application in membrane proteins. The hierarchical scheme consists of two levels: in the first level, contact residues are predicted from the sequence and their pairing relationships are further predicted in the second level. Statistical analyses on contact propensities are combined with other sequence and structural information for training the support vector machine classifiers. Evaluated on 52 protein chains using leave-one-out cross validation (LOOCV) and an independent test set of 14 protein chains, the two-level approach consistently improves the conventional direct approach in prediction accuracy, with 80% reduction of input for prediction. Furthermore, the predicted contacts are then used to infer interactions between pairs of helices. When at least three predicted contacts are required for an inferred interaction, the accuracy, sensitivity and specificity are 56%, 40% and 89%, respectively. Our results demonstrate that a hierarchical framework can be applied to eliminate false positives (FP) while reducing computational complexity in predicting contacts. Together with the estimated contact propensities, this method can be used to gain insights into helix-packing in membrane proteins. Availability: http://bio-cluster.iis.sinica.edu.tw/TMhit/ Contact: tsung@iis.sinica.edu.tw Supplementary information:Supplementary data are available at Bioinformatics online. PMID:19244388

  6. 76 FR 75504 - Table Saw Blade Contact Injuries; Notice of Extension of Time for Comments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-02

    ... [Docket No. CPSC-2011-0074] Table Saw Blade Contact Injuries; Notice of Extension of Time for Comments... blade contact, regulatory alternatives, other possible means to address this risk, and other topics or... identifiers, contact information, or other personal information provided, to: http://www.regulations.gov . Do...

  7. 77 FR 58911 - Additional Identifying Information for One (1) Individual Designated Pursuant to Executive Order...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-24

    ... Designated Nationals and Blocked Persons (``SDN List'') on September 13, 2012. FOR FURTHER INFORMATION... and Facsimile Availability The SDN List and additional information concerning OFAC are available from...

  8. Contact Patterns among High School Students

    PubMed Central

    Fournet, Julie; Barrat, Alain

    2014-01-01

    Face-to-face contacts between individuals contribute to shape social networks and play an important role in determining how infectious diseases can spread within a population. It is thus important to obtain accurate and reliable descriptions of human contact patterns occurring in various day-to-day life contexts. Recent technological advances and the development of wearable sensors able to sense proximity patterns have made it possible to gather data giving access to time-varying contact networks of individuals in specific environments. Here we present and analyze two such data sets describing with high temporal resolution the contact patterns of students in a high school. We define contact matrices describing the contact patterns between students of different classes and show the importance of the class structure. We take advantage of the fact that the two data sets were collected in the same setting during several days in two successive years to perform a longitudinal analysis on two very different timescales. We show the high stability of the contact patterns across days and across years: the statistical distributions of numbers and durations of contacts are the same in different periods, and we observe a very high similarity of the contact matrices measured in different days or different years. The rate of change of the contacts of each individual from one day to the next is also similar in different years. We discuss the interest of the present analysis and data sets for various fields, including in social sciences in order to better understand and model human behavior and interactions in different contexts, and in epidemiology in order to inform models describing the spread of infectious diseases and design targeted containment strategies. PMID:25226026

  9. 76 FR 22680 - Procurement List; Proposed Addition

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-22

    ... (41 U.S.C. 46- 48c) in connection with the service proposed for addition to the Procurement List... Type/Location: Contact Center Service. Human Resources Command Contact Center, Fort Knox, KY. NPAs...). Contracting Activity: Department of the Army, Human Resource Command, Fort Knox, KY. Barry S. Lineback...

  10. Modeling of contact tracing in social networks

    NASA Astrophysics Data System (ADS)

    Tsimring, Lev S.; Huerta, Ramón

    2003-07-01

    Spreading of certain infections in complex networks is effectively suppressed by using intelligent strategies for epidemic control. One such standard epidemiological strategy consists in tracing contacts of infected individuals. In this paper, we use a recently introduced generalization of the standard susceptible-infectious-removed stochastic model for epidemics in sparse random networks which incorporates an additional (traced) state. We describe a deterministic mean-field description which yields quantitative agreement with stochastic simulations on random graphs. We also discuss the role of contact tracing in epidemics control in small-world and scale-free networks. Effectiveness of contact tracing grows as the rewiring probability is reduced.

  11. Imaging surface contacts: Power law contact distributions and contact stresses in quartz, calcite, glass and acrylic plastic

    USGS Publications Warehouse

    Dieterich, J.H.; Kilgore, B.D.

    1996-01-01

    A procedure has been developed to obtain microscope images of regions of contact between roughened surfaces of transparent materials, while the surfaces are subjected to static loads or undergoing frictional slip. Static loading experiments with quartz, calcite, soda-lime glass and acrylic plastic at normal stresses to 30 MPa yield power law distributions of contact areas from the smallest contacts that can be resolved (3.5 ??m2) up to a limiting size that correlates with the grain size of the abrasive grit used to roughen the surfaces. In each material, increasing normal stress results in a roughly linear increase of the real area of contact. Mechanisms of contact area increase are by growth of existing contacts, coalescence of contacts and appearance of new contacts. Mean contacts stresses are consistent with the indentation strength of each material. Contact size distributions are insensitive to normal stress indicating that the increase of contact area is approximately self-similar. The contact images and contact distributions are modeled using simulations of surfaces with random fractal topographies. The contact process for model fractal surfaces is represented by the simple expedient of removing material at regions where surface irregularities overlap. Synthetic contact images created by this approach reproduce observed characteristics of the contacts and demonstrate that the exponent in the power law distributions depends on the scaling exponent used to generate the surface topography.

  12. ZnO Schottky barriers and Ohmic contacts

    NASA Astrophysics Data System (ADS)

    Brillson, Leonard J.; Lu, Yicheng

    2011-06-01

    ZnO has emerged as a promising candidate for optoelectronic and microelectronic applications, whose development requires greater understanding and control of their electronic contacts. The rapid pace of ZnO research over the past decade has yielded considerable new information on the nature of ZnO interfaces with metals. Work on ZnO contacts over the past decade has now been carried out on high quality material, nearly free from complicating factors such as impurities, morphological and native point defects. Based on the high quality bulk and thin film crystals now available, ZnO exhibits a range of systematic interface electronic structure that can be understood at the atomic scale. Here we provide a comprehensive review of Schottky barrier and ohmic contacts including work extending over the past half century. For Schottky barriers, these results span the nature of ZnO surface charge transfer, the roles of surface cleaning, crystal quality, chemical interactions, and defect formation. For ohmic contacts, these studies encompass the nature of metal-specific interactions, the role of annealing, multilayered contacts, alloyed contacts, metallization schemes for state-of-the-art contacts, and their application to n-type versus p-type ZnO. Both ZnO Schottky barriers and ohmic contacts show a wide range of phenomena and electronic behavior, which can all be directly tied to chemical and structural changes on an atomic scale.

  13. Contact urticaria, allergic contact dermatitis, and photoallergic contact dermatitis from oxybenzone.

    PubMed

    Landers, Maeran; Law, Sandra; Storrs, Frances J

    2003-03-01

    There is little literature regarding conventional patch tests and photopatch tests to oxybenzone resulting in both immediate- and delayed-type hypersensitivity reactions. A patient was patch-tested and photopatch-tested to various sunscreen chemicals. Both immediate- and delayed-type hypersensitivity reactions were observed with oxybenzone. The positive patch tests were also photoaccentuated. Oxybenzone, a common sunscreen allergen, can result in both contact urticaria and delayed-type hypersensitivity on both conventional patch testing and photopatch testing. Allergic contact dermatitis to sunscreen chemicals has traditionally included contact urticaria, allergic contact dermatitis, and photoallergic contact dermatitis. Due to the recognition of p-aminobenzoic acid (PABA) and its esters as sensitizers, the presence of benzophenones in "PABA-free" sunscreens has become more prevalent, especially in sunscreens with a sun protection factor (SPF) greater than 8. In our patient, immediate- and delayed-type hypersensitivity reactions were seen to oxybenzone (2-hydroxy-4-methoxybenzophenone, 2-benzoyl-5-methoxyphenol, benzophenone-3, Eusolex 4360, Escalol 567, EUSORB 228, Spectra-Sorb UV-9, Uvinul M-40) upon conventional patch testing and photopatch testing.

  14. Modeling and estimation of tip contact force for steerable ablation catheters.

    PubMed

    Khoshnam, Mahta; Skanes, Allan C; Patel, Rajni V

    2015-05-01

    The efficacy of catheter-based cardiac ablation procedures can be significantly improved if real-time information is available concerning contact forces between the catheter tip and cardiac tissue. However, the widely used ablation catheters are not equipped for force sensing. This paper proposes a technique for estimating the contact forces without direct force measurements by studying the changes in the shape of the deflectable distal section of a conventional 7-Fr catheter (henceforth called the "deflectable distal shaft," the "deflectable shaft," or the "shaft" of the catheter) in different loading situations. First, the shaft curvature when the tip is moving in free space is studied and based on that, a kinematic model for the deflectable shaft in free space is proposed. In the next step, the shaft shape is analyzed in the case where the tip is in contact with the environment, and it is shown that the curvature of the deflectable shaft provides useful information about the loading status of the catheter and can be used to define an index for determining the range of contact forces exerted by the ablation tip. Experiments with two different steerable ablation catheters show that the defined index can detect the range of applied contact forces correctly in more than 80% of the cases. Based on the proposed technique, a framework for obtaining contact force information by using the shaft curvature at a limited number of points along the deflectable shaft is constructed. The proposed kinematic model and the force estimation technique can be implemented together to describe the catheter's behavior before contact, detect tip/tissue contact, and determine the range of contact forces. This study proves that the flexibility of the catheter's distal shaft provides a means of estimating the force exerted on tissue by the ablation tip.

  15. The safety and efficacy of contact lens wear in the industrial and chemical workplace.

    PubMed

    Tyhurst, Keith; McNett, Ryan; Bennett, Edward

    2007-11-01

    The use and safety of contact lenses in the industrial and chemical workplace has often been questioned since the 1960s because of many unconfirmed reports of ocular injury resulting from contact lens wear. Because of these urban legends, contact lens wear has been banned or wearers have been required to wear additional personal protective equipment (PPE) not required of non-contact lens wearers. Literature review via Medline and Google search. Research has shown that contact lenses typically provide protective benefits that decrease the severity of ocular injury and improve worker performance. While contact lens wear contraindications do exist, in most cases, and with proper precautions, contact lens wear is still possible. Industrial and chemical companies need to establish written contact lens use policies based on current studies that have shown the safety of workplace contact lens wear when combined with the same PPE required of non-contact lens wearers. Practitioners need to discuss, with their contact lens patients, the additional responsibilities required to maintain proper lens hygiene and proper PPE in the workplace.

  16. Teacher Pupil Contact in Junior Classrooms

    ERIC Educational Resources Information Center

    Boydell, D.

    1974-01-01

    The purpose of the exploratory study reported here was to examine the nature of teacher-pupil contact in informal junior classrooms in terms of the teacher's method of talking to children and the teacher's conversational approach. (Author/RK)

  17. The impact of psychotherapist training and experience on posttermination contact.

    PubMed

    Jofen-Miller, Sarah; Fiori, Katherine L

    2017-03-01

    This study sought to enhance our understanding of posttermination contact, with a particular focus on the role of training and experience in shaping attitudes and behaviors with respect to the posttermination period. We collected anonymous online survey data related to attitudes, policies, and experience of posttermination contact from 144 licensed clinicians. Our sample was composed of an experienced group of clinicians, with 20.7 years in practice on average. Clinicians had a range of clinical orientations and ∼25% of respondents were from outside of the United States. Over 90% of the participants (130) endorsed having had some form of posttermination contact, and 25% (36) reported initiating posttermination contact with a past patient. Only 62 participants (43.4%) reported receiving graduate training related to posttermination contact, and those with graduate training were more likely to have an established posttermination policy that they reviewed with patients. In addition, recent graduates were more likely to report having had training on this topic than older graduates. In terms of attitudes, therapists were more likely to anticipate positive rather than negative consequences of posttermination contact for both patients and themselves, and the longer a therapist had been in practice the less likely they were to anticipate negative consequences of posttermination contact. Additionally, a clinician's contact with their own therapist made them more likely to anticipate positive consequences for both themselves and their patients. Given the ubiquity of posttermination contact, the posttermination period should be given more attention in training programs and research. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  18. 33 CFR 148.108 - What if a Federal or State agency or other interested party requests additional information?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... whether: (1) The information requested is essential for processing the license application; and (2) The... or other interested party requests additional information? 148.108 Section 148.108 Navigation and... requests additional information? (a) Any Federal or State agency or other interested person may recommend...

  19. 26 CFR 1.852-7 - Additional information required in returns of shareholders.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.852-7 Additional information required in returns of shareholders. Any person who fails or refuses to comply with the demand of a regulated investment company for the written statements...

  20. 26 CFR 1.852-7 - Additional information required in returns of shareholders.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.852-7 Additional information required in returns of shareholders. Any person who fails or refuses to comply with the demand of a regulated investment company for the written statements...

  1. 26 CFR 1.852-7 - Additional information required in returns of shareholders.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.852-7 Additional information required in returns of shareholders. Any person who fails or refuses to comply with the demand of a regulated investment company for the written statements...

  2. 26 CFR 1.852-7 - Additional information required in returns of shareholders.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.852-7 Additional information required in returns of shareholders. Any person who fails or refuses to comply with the demand of a regulated investment company for the written statements...

  3. 21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... § 20.61 of this chapter. (3) Adverse reaction reports, product experience reports, consumer complaints... or action on a particular lot of a certifiable color additive. (b) The following data and information...

  4. Experimental study of tyre/road contact forces in rolling conditions for noise prediction

    NASA Astrophysics Data System (ADS)

    Cesbron, Julien; Anfosso-Lédée, Fabienne; Duhamel, Denis; Ping Yin, Hai; Le Houédec, Donatien

    2009-02-01

    This paper deals with the experimental study of dynamical tyre/road contact for noise prediction. In situ measurements of contact forces and close proximity noise levels were carried out for a slick tyre rolling on six different road surfaces between 30 and 50 km/h. Additional texture profiles of the tested surfaces were taken on the wheel track. Normal contact stresses were measured at a sampling frequency of 10752 Hz using a line of pressure sensitive cells placed both along and perpendicular to the rolling direction. The contact areas obtained during rolling were smaller than in static conditions. This is mainly explained by the dynamical properties of tyre compounds, like the viscoelastic behaviour of the rubber. Additionally the root-mean-square of the resultant contact forces at various speeds was in the same order for a given road surface, while their spectra were quite different. This is certainly due to a spectral influence of bending waves propagating in the tyre during rolling, especially when the wavelength is small in comparison with the size of the contact patch. Finally, the levels of contact forces and close proximity noise measured at 30 km/h were correlated. Additional correlations with texture levels were performed. The results show that the macro-texture generates contact forces linearly around 800 Hz and consequently noise levels between 500 and 1000 Hz via the vibrations transmitted to the tyre.

  5. Effect of non-solvent additives on the morphology, pore structure, and direct contact membrane distillation performance of PVDF-CTFE hydrophobic membranes.

    PubMed

    Zheng, Libing; Wu, Zhenjun; Zhang, Yong; Wei, Yuansong; Wang, Jun

    2016-07-01

    Four common types of additives for polymer membrane preparation including organic macromolecule and micromolecule additives, inorganic salts and acids, and the strong non-solvent H2O were used to prepare poly (vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) hydrophobic flat-sheet membranes. Membrane properties including morphology, porosity, hydrophobicity, pore size and pore distribution were investigated, and the permeability was evaluated via direct contact membrane distillation (DCMD) of 3.5g/L NaCl solution in a DCMD configuration. Both inorganic and organic micromolecule additives were found to slightly influence membrane hydrophobicity. Polyethylene glycol (PEG), organic acids, LiCl, MgCl2, and LiCl/H2O mixtures were proved to be effective additives to PVDF-CTFE membranes due to their pore-controlling effects and the capacity to improve the properties and performance of the resultant membranes. The occurrence of a pre-gelation process showed that when organic and inorganic micromolecules were added to PVDF-CTFE solution, the resultant membranes presented a high interconnectivity structure. The membrane prepared with dibutyl phthalate (DBP) showed a nonporous surface and symmetrical cross-section. When H2O and LiCl/H2O mixtures were also used as additives, they were beneficial for solid-liquid demixing, especially when LiCl/H2O mixed additives were used. The membrane prepared with 5% LiCl+2% H2O achieved a flux of 24.53kg/(m(2)·hr) with 99.98% salt rejection. This study is expected to offer a reference not only for PVDF-CTFE membrane preparation but also for other polymer membranes. Copyright © 2016. Published by Elsevier B.V.

  6. Tribological Behaviors of Graphene and Graphene Oxide as Water-Based Lubricant Additives for Magnesium Alloy/Steel Contacts.

    PubMed

    Xie, Hongmei; Jiang, Bin; Dai, Jiahong; Peng, Cheng; Li, Chunxia; Li, Quan; Pan, Fusheng

    2018-01-29

    The tribological behaviors of graphene and graphene oxide (GO) as water-based lubricant additives were evaluated by use of a reciprocating ball-on-plate tribometer for magnesium alloy-steel contacts. Three sets of test conditions were examined to investigate the effect of concentration, the capacity of carrying load and the endurance of the lubrication film, respectively. The results showed that the tribological behaviors of water can be improved by adding the appropriate graphene or GO. Compared with pure deionized water, 0.5 wt.% graphene nanofluids can offer reduction of friction coefficient by 21.9% and reduction of wear rate by 13.5%. Meanwhile, 0.5 wt.% GO nanofluids were found to reduce the friction coefficient and wear rate up to 77.5% and 90%, respectively. Besides this, the positive effect of the GO nanofluids was also more pronounced in terms of the load-carrying capacity and the lubrication film endurance. The wear mechanisms have been tentatively proposed according to the observation of the worn surfaces by field emission scanning electron microscope-energy dispersive spectrometer (FESEM-EDS) and Raman spectrum as well as the wettability of the nanofluids on the magnesium alloy surface by goniometer.

  7. Tribological Behaviors of Graphene and Graphene Oxide as Water-Based Lubricant Additives for Magnesium Alloy/Steel Contacts

    PubMed Central

    Xie, Hongmei; Jiang, Bin; Dai, Jiahong; Peng, Cheng; Li, Chunxia; Li, Quan; Pan, Fusheng

    2018-01-01

    The tribological behaviors of graphene and graphene oxide (GO) as water-based lubricant additives were evaluated by use of a reciprocating ball-on-plate tribometer for magnesium alloy-steel contacts. Three sets of test conditions were examined to investigate the effect of concentration, the capacity of carrying load and the endurance of the lubrication film, respectively. The results showed that the tribological behaviors of water can be improved by adding the appropriate graphene or GO. Compared with pure deionized water, 0.5 wt.% graphene nanofluids can offer reduction of friction coefficient by 21.9% and reduction of wear rate by 13.5%. Meanwhile, 0.5 wt.% GO nanofluids were found to reduce the friction coefficient and wear rate up to 77.5% and 90%, respectively. Besides this, the positive effect of the GO nanofluids was also more pronounced in terms of the load-carrying capacity and the lubrication film endurance. The wear mechanisms have been tentatively proposed according to the observation of the worn surfaces by field emission scanning electron microscope-energy dispersive spectrometer (FESEM-EDS) and Raman spectrum as well as the wettability of the nanofluids on the magnesium alloy surface by goniometer. PMID:29382160

  8. An elastic-plastic contact model for line contact structures

    NASA Astrophysics Data System (ADS)

    Zhu, Haibin; Zhao, Yingtao; He, Zhifeng; Zhang, Ruinan; Ma, Shaopeng

    2018-06-01

    Although numerical simulation tools are now very powerful, the development of analytical models is very important for the prediction of the mechanical behaviour of line contact structures for deeply understanding contact problems and engineering applications. For the line contact structures widely used in the engineering field, few analytical models are available for predicting the mechanical behaviour when the structures deform plastically, as the classic Hertz's theory would be invalid. Thus, the present study proposed an elastic-plastic model for line contact structures based on the understanding of the yield mechanism. A mathematical expression describing the global relationship between load history and contact width evolution of line contact structures was obtained. The proposed model was verified through an actual line contact test and a corresponding numerical simulation. The results confirmed that this model can be used to accurately predict the elastic-plastic mechanical behaviour of a line contact structure.

  9. Equilibrium contact angle or the most-stable contact angle?

    PubMed

    Montes Ruiz-Cabello, F J; Rodríguez-Valverde, M A; Cabrerizo-Vílchez, M A

    2014-04-01

    It is well-established that the equilibrium contact angle in a thermodynamic framework is an "unattainable" contact angle. Instead, the most-stable contact angle obtained from mechanical stimuli of the system is indeed experimentally accessible. Monitoring the susceptibility of a sessile drop to a mechanical stimulus enables to identify the most stable drop configuration within the practical range of contact angle hysteresis. Two different stimuli may be used with sessile drops: mechanical vibration and tilting. The most stable drop against vibration should reveal the changeless contact angle but against the gravity force, it should reveal the highest resistance to slide down. After the corresponding mechanical stimulus, once the excited drop configuration is examined, the focus will be on the contact angle of the initial drop configuration. This methodology needs to map significantly the static drop configurations with different stable contact angles. The most-stable contact angle, together with the advancing and receding contact angles, completes the description of physically realizable configurations of a solid-liquid system. Since the most-stable contact angle is energetically significant, it may be used in the Wenzel, Cassie or Cassie-Baxter equations accordingly or for the surface energy evaluation. © 2013 Elsevier B.V. All rights reserved.

  10. Skin-specific training experience of workers assessed for contact dermatitis.

    PubMed

    Zack, B; Arrandale, V; Holness, D L

    2018-05-17

    Contact dermatitis is a common and preventable work-related disease. Skin-specific training may be effective for preventing occupational contact dermatitis, but little information is available regarding actual workplace training and its effectiveness. To describe workplace skin-specific training among workers with suspected contact dermatitis. Patch test patients being assessed for suspected contact dermatitis at an occupational health clinic in Toronto, Canada, completed a questionnaire on training experiences, workplace characteristics, exposures and skin protection practices. Of 175 patients approached, 122 (71%) workers completed questionnaires. Many (80%) had received general occupational health and safety and hazardous materials training (76%). Fewer (39%) received skin-specific training. Of those with work-related contact dermatitis, 52% did not receive skin-specific training. Skin-specific training was commonly provided by health and safety professionals or supervisors using video, classroom and online techniques. Content included glove use, exposure avoidance and hand washing information. Workers that received skin-specific training found it memorable (87%), useful (85%) and common sense in nature (100%). This study indicates gaps in workplace training on skin disease prevention for workers with contact dermatitis. Workers perceived skin-specific training to be useful. Understanding worker training experiences is important to prevention programme development and reducing work-related skin disease.

  11. Dynamics of the Molten Contact Line

    NASA Technical Reports Server (NTRS)

    Sonin, Ain A.; Duthaler, Gregg; Liu, Michael; Torresola, Javier; Qiu, Taiqing

    1999-01-01

    The purpose of this program is to develop a basic understanding of how a molten material front spreads over a solid that is below its melting point, arrests, and freezes. Our hope is that the work will contribute toward a scientific knowledge base for certain new applications involving molten droplet deposition, including the "printing" of arbitrary three-dimensional objects by precise deposition of individual molten microdrops that solidify after impact. Little information is available at this time on the capillarity-driven motion and arrest of molten contact line regions. Schiaffino and Sonin investigated the arrest of the contact line of a molten microcrystalline wax spreading over a subcooled solid "target" of the same material. They found that contact line arrest takes place at an apparent liquid contact angle that depends primarily on the Stefan number S=c(T(sub f) -T(sub t)/L based on the temperature difference between the fusion point and the target temperature, and proposed that contact line arrest occurs when the liquid's dynamic contact angle approaches the angle of attack of the solidification front just behind the contact line. They also showed, however, that the conventional continuum equations and boundary conditions have no meaningful solution for this angle. The solidification front angle is determined by the heat flux just behind the contact line, and the heat flux is singular at that point. By comparing experiments with numerical computations, Schiaffino and Sonin estimated that the conventional solidification model must break down within a distance of order 0.1 - 1 microns of the contact line. The physical mechanism for this breakdown is as yet undetermined, and no first-principles theory exists for the contact angle at arrest. Schiaffino and Sonin also presented a framework for understanding how to moderate Weber number molten droplet deposition in terms of similarity laws and experimentation. The study is based on experiments with three molten

  12. Medical marijuana: time to contact your U.S. representative.

    PubMed

    James, J S

    1998-04-03

    Advocates for legalizing marijuana for medicinal use are encouraged to contact their U.S. representatives. The first congressional vote on medicinal use of marijuana, House Resolution 372 (the anti-medicinal-marijuana resolution), takes place on April 21. H. Res. 372 states that marijuana is a dangerous and addictive drug. Nine Democrats on the House Judiciary Committee strongly disagreed with the statement and supported State initiatives to legalize marijuana for medicinal purposes. The Marijuana Policy Project offers a script to use when contacting representatives. Contact information is provided.

  13. Enhancing imagined contact to reduce prejudice against people with schizophrenia

    PubMed Central

    West, Keon; Holmes, Emily; Hewstone, Miles

    2015-01-01

    Four studies investigated the effect of imagining intergroup contact on prejudice against people with schizophrenia. Experiments 1 and 2 demonstrated that a neutral imagined contact task can have negative effects, compared to a control condition, even when paired with incidental positive information (Experiment 2). Experiments 3 and 4 demonstrated, however, that an integrated positive imagined contact scenario does result in less intergroup anxiety and more positive attitudes, even toward this challenging group. Analyses of participants’ descriptions of the imagined interactions in and across the first three studies confirm that positive and high quality imagined contact is important for reducing prejudice, but failing to ensure that imagined contact is positive may have deleterious consequences. We emphasize the importance of investigating the quality of the imagined contact experience, and discuss the implications for using imagined contact as a prejudice-reducing intervention. PMID:26435686

  14. Contact binaries in the Trans-neptunian Belt

    NASA Astrophysics Data System (ADS)

    Thirouin, Audrey; Sheppard, Scott S.

    2017-10-01

    A contact binary is made up of two objects that are almost touching or in contact with each other. These systems have been found in the Near-Earth Object population, the main belt of asteroids, the Jupiter Trojans, the comet population and even in the Trans-neptunian belt.Several studies suggest that up to 30% of the Trans-Neptunian Objects (TNOs) could be contact binaries (Sheppard & Jewitt 2004, Lacerda 2011). Contact binaries are not resolvable with the Hubble Space Telescope because of the small separation between the system's components (Noll et al. 2008). Only lightcurves with a characteristic V-/U-shape at the minimum/maximum of brightness and a large amplitude can identify these contact binaries. Despite an expected high fraction of contact binaries, 2001 QG298 is the only confirmed contact binary in the Trans-Neptunian belt, and 2003 SQ317 is a candidate to this class of systems (Sheppard & Jewitt 2004, Lacerda et al. 2014).Recently, using the Lowell’s 4.3m Discovery Channel Telescope and the 6.5m Magellan Telescope, we started a search for contact binaries at the edge of our Solar System. So far, our survey focused on about 40 objects in different dynamical groups of the Trans-Neptunian belt for sparse or complete lightcurves. We report the discovery of 5 new potential contact binaries converting the current estimate of potential/confirmed contact binaries to 7 objects. With one epoch of observations per object, we are not able to model in detail the systems, but we derive estimate for basic information such as shape, size, density of both objects as well as the separation between the system’s components. In this work, we will present these new systems, their basic characteristics, and we will discuss the potential main reservoir of contact binaries in the Trans-neptunian belt.

  15. An Evaluation System for the Contact Electrification of a Single Microparticle Using Microelectromechanical-Based Actuated Tweezers.

    PubMed

    Yamaguchi, Daichi

    2018-06-05

    The image quality of laser and multi-function printers that make use of electrophotography depends on the amount of surface charge generated by contact electrification on the toner particles. However, because it has been impossible to experimentally evaluate such amounts under controlled contact conditions using macroscopic measurements, theoretical elucidation of the contact electrification mechanism has not progressed sufficiently. In the present study, we have developed a system to experimentally evaluate the contact electrification of a single particle using atomic force microscopy (AFM) and nanotweezers (microelectromechanical systems (MEMS)-based actuated tweezers). This system performs, in succession, (i) a contact test that makes use of the nanotweezers and three piezoelectric stages, and (ii) an image force measurement using the AFM cantilever. Using this system, contact electrification was evaluated under controlled conditions, such as the contact number and the indentation depth. In addition, differences in contact electrification due to the amount of external surface additives were investigated. The results reveal that a coating with external additives leads to a decrease in the amount of contact electrification due to a reduction in the contact area with the substrate.

  16. Learning Grasp Strategies Composed of Contact Relative Motions

    NASA Technical Reports Server (NTRS)

    Platt, Robert, Jr.

    2007-01-01

    Of central importance to grasp synthesis algorithms are the assumptions made about the object to be grasped and the sensory information that is available. Many approaches avoid the issue of sensing entirely by assuming that complete information is available. In contrast, this paper proposes an approach to grasp synthesis expressed in terms of units of control that simultaneously change the contact configuration and sense information about the object and the relative manipulator-object pose. These units of control, known as contact relative motions (CRMs), allow the grasp synthesis problem to be recast as an optimal control problem where the goal is to find a strategy for executing CRMs that leads to a grasp in the shortest number of steps. An experiment is described that uses Robonaut, the NASA-JSC space humanoid, to show that CRMs are a viable means of synthesizing grasps. However, because of the limited amount of information that a single CRM can sense, the optimal control problem may be partially observable. This paper proposes expressing the problem as a k-order Markov Decision Process (MDP) and solving it using Reinforcement Learning. This approach is tested in a simulation of a two-contact manipulator that learns to grasp an object. Grasp strategies learned in simulation are tested on the physical Robonaut platform and found to lead to grasp configurations consistently.

  17. Fragrance contact allergy: a 4-year retrospective study.

    PubMed

    Cuesta, Laura; Silvestre, Juan Francisco; Toledo, Fernando; Lucas, Ana; Pérez-Crespo, María; Ballester, Irene

    2010-08-01

    Fragrance chemicals are the second most frequent cause of contact allergy. The mandatory labelling of 26 fragrance chemicals when present in cosmetics has facilitated management of patients allergic to fragrances. The study was aimed to define the characteristics of the population allergic to perfumes detected in our hospital district, to determine the usefulness of markers of fragrance allergy in the baseline GEIDAC series, and to describe the contribution made by the fragrance series to the data obtained with the baseline series. We performed a 4-year retrospective study of patients tested with the Spanish baseline series and/or fragrance series. There are four fragrance markers in the baseline series: fragrance mix I (FM I), Myroxylon pereirae, fragrance mix II (FM II), and hydroxyisohexyl 3-cyclohexene carboxaldehyde. A total of 1253 patients were patch tested, 117 (9.3%) of whom were positive to a fragrance marker. FM I and M. pereirae detected 92.5% of the cases of fragrance contact allergy. FM II and hydroxyisohexyl 3-cyclohexene carboxaldehyde detected 6 additional cases and provided further information in 8, enabling improved management. A fragrance series was tested in a selected group of 86 patients and positive results were obtained in 45.3%. Geraniol was the allergen most frequently found in the group of patients tested with the fragrance series. Classic markers detect the majority of cases of fragrance contact allergy. We recommend incorporating FM II in the Spanish baseline series, as in the European baseline series, and using a specific fragrance series to study patients allergic to a fragrance marker.

  18. Analysis and Visualization of Nerve Vessel Contacts for Neurovascular Decompression

    NASA Astrophysics Data System (ADS)

    Süßmuth, Jochen; Piazza, Alexander; Enders, Frank; Naraghi, Ramin; Greiner, Günther; Hastreiter, Peter

    Neurovascular compression syndromes are caused by a pathological contact between cranial nerves and vascular structures at the surface of the brainstem. Aiming at improved pre-operative analysis of the target structures, we propose calculating distance fields to provide quantitative information of the important nerve-vessel contacts. Furthermore, we suggest reconstructing polygonal models for the nerves and vessels. Color-coding with the respective distance information is used for enhanced visualization. Overall, our new strategy contributes to a significantly improved clinical understanding.

  19. Additional Support for the Information Systems Analyst Exam as a Valid Program Assessment Tool

    ERIC Educational Resources Information Center

    Carpenter, Donald A.; Snyder, Johnny; Slauson, Gayla Jo; Bridge, Morgan K.

    2011-01-01

    This paper presents a statistical analysis to support the notion that the Information Systems Analyst (ISA) exam can be used as a program assessment tool in addition to measuring student performance. It compares ISA exam scores earned by students in one particular Computer Information Systems program with scores earned by the same students on the…

  20. Transmission events revealed in tuberculosis contact investigations in London.

    PubMed

    Cavany, Sean M; Vynnycky, Emilia; Sumner, Tom; Macdonald, Neil; Thomas, H Lucy; White, Jacqui; White, Richard G; Maguire, Helen; Anderson, Charlotte

    2018-04-27

    Contact tracing is a key part of tuberculosis prevention and care, aiming to hasten diagnosis and prevent transmission. The proportion of case-contact pairs for which recent transmission occurred and the typical timespans between the index case and their contact accessing care are not known; we aimed to calculate these. We analysed individual-level TB contact tracing data, collected in London from 20/01/2011-31/12/2015, linked to tuberculosis surveillance and MIRU-VNTR 24-locus strain-typing information. Of pairs of index cases and contacts diagnosed with active tuberculosis, 85/314 (27%) had strain typing data available for both. Of these pairs, 79% (67/85) shared indistinguishable isolates, implying probable recent transmission. Of pairs in which both contact and the index case had a social risk factor, 11/11 (100%) shared indistinguishable isolates, compared to 55/75 (75%) of pairs in which neither had a social risk factor (P = 0.06). The median time interval between the index case and their contact accessing care was 42 days (IQR: 16, 96). As over 20% of pairs did probably not involve recent transmission between index case and contact, the effectiveness of contact tracing is not necessarily limited to those circumstances where the index case has transmitted disease to their close contacts.

  1. 36 CFR 1239.12 - Whom may agencies contact to request program assistance?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... § 1239.12 Whom may agencies contact to request program assistance? Agencies in the Washington, DC, area desiring information or assistance related to any of the areas covered by subchapter B may contact the... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Whom may agencies contact to...

  2. 47 CFR 25.111 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... information it requires for the Advance Publication, Coordination and Notification of frequency assignments... information required by the ITU Radiocommunication Bureau to advance publish, coordinate and notify the frequencies to be used for tracking, telemetry and control functions of DBS systems. [56 FR 24016, May 28...

  3. Hot or not? Thermal reactions to social contact.

    PubMed

    Hahn, Amanda C; Whitehead, Ross D; Albrecht, Marion; Lefevre, Carmen E; Perrett, David I

    2012-10-23

    Previous studies using thermal imaging have suggested that face and body temperature increase during periods of sexual arousal. Additionally, facial skin temperature changes are associated with other forms of emotional arousal, including fear and stress. This study investigated whether interpersonal social contact can elicit facial temperature changes. Study 1: infrared images were taken during a standardized interaction with a same- and opposite-sex experimenter using skin contact in a number of potentially high-intimate (face and chest) and low-intimate (arm and palm) locations. Facial skin temperatures significantly increased from baseline during the face and chest contact, and these temperature shifts were larger when contact was made by an opposite-sex experimenter. Study 2: the topography of facial temperature change was investigated in five regions: forehead, periorbital, nose, mouth and cheeks. Increased temperature in the periorbital, nose and mouth regions predicted overall facial temperature shifts to social contact. Our findings demonstrate skin temperature changes are a sensitive index of arousal during interpersonal interactions.

  4. Contact Languages around the World and Their Levels of Endangerment

    ERIC Educational Resources Information Center

    Lee, Nala H.

    2018-01-01

    This paper provides an up-to-date report on the vitality or endangerment status of contact languages around the world, including pidgins, creoles, and mixed languages. By utilizing information featured in the "Endangered Languages Project" and the "Atlas of Pidgin and Creole Languages" online portals, 96 contact languages are…

  5. Influence of Asymmetric Contact Form on Contact Resistance and Schottky Barrier, and Corresponding Applications of Diode.

    PubMed

    Zhao, Yudan; Xiao, Xiaoyang; Huo, Yujia; Wang, Yingcheng; Zhang, Tianfu; Jiang, Kaili; Wang, Jiaping; Fan, Shoushan; Li, Qunqing

    2017-06-07

    We have fabricated carbon nanotube and MoS 2 field-effect transistors with asymmetric contact forms of source-drain electrodes, from which we found the current directionality of the devices and different contact resistances under the two current directions. By designing various structures, we can conclude that the asymmetric electrical performance was caused by the difference in the effective Schottky barrier height (Φ SB ) caused by the different contact forms. A detailed temperature-dependent study was used to extract and compare the Φ SB for both contact forms of CNT and MoS 2 devices; we found that the Φ SB for the metal-on-semiconductor form was much lower than that of the semiconductor-on-metal form and is suitable for all p-type, n-type, or ambipolar semiconductors. This conclusion is meaningful with respect to the design and application of nanomaterial electronic devices. Additionally, using the difference in barrier height caused by the contact forms, we have also proposed and fabricated Schottky barrier diodes with a current ratio up to 10 4 ; rectifying circuits consisting of these diodes were able to work in a wide frequency range. This design avoided the use of complex chemical doping or heterojunction methods to achieve fundamental diodes that are relatively simple and use only a single material; these may be suitable for future application in nanoelectronic radio frequency or integrated circuits.

  6. [Contact allergy to dexpanthenol].

    PubMed

    Keilig, W

    1987-01-01

    A case report is given of a 56-year-old female patient with a postthrombotic leg ulcer and stasis dermatitis, in whom contact dermatitis to a dexpanthenol-containing ointment was first described in 1965. Recent allergy testing confirmed this finding and revealed positive reactions to the pure substance dexpanthenol as well as to two additives. Based on this case history the importance of dexpanthenol as an allergen is discussed.

  7. General Information about Bladder Cancer

    MedlinePlus

    ... the PDQ Adult Treatment Editorial Board . Clinical Trial Information A clinical trial is a study to answer ... Twitter Instagram YouTube Google+ LinkedIn GovDelivery RSS CONTACT INFORMATION Contact Us LiveHelp Online Chat MORE INFORMATION About ...

  8. General Information about Pituitary Tumors

    MedlinePlus

    ... the PDQ Adult Treatment Editorial Board . Clinical Trial Information A clinical trial is a study to answer ... Twitter Instagram YouTube Google+ LinkedIn GovDelivery RSS CONTACT INFORMATION Contact Us LiveHelp Online Chat MORE INFORMATION About ...

  9. General Information about Gallbladder Cancer

    MedlinePlus

    ... the PDQ Adult Treatment Editorial Board . Clinical Trial Information A clinical trial is a study to answer ... Twitter Instagram YouTube Google+ LinkedIn GovDelivery RSS CONTACT INFORMATION Contact Us LiveHelp Online Chat MORE INFORMATION About ...

  10. Ohmic contacts to Al-rich AlGaN heterostructures

    DOE PAGES

    Douglas, E. A.; Reza, S.; Sanchez, C.; ...

    2017-06-06

    Due to the ultra-wide bandgap of Al-rich AlGaN, up to 5.8 eV for the structures in this study, obtaining low resistance ohmic contacts is inherently difficult to achieve. A comparative study of three different fabrication schemes is presented for obtaining ohmic contacts to an Al-rich AlGaN channel. Schottky-like behavior was observed for several different planar metallization stacks (and anneal temperatures), in addition to a dry-etch recess metallization contact scheme on Al 0.85Ga 0.15N/Al 0.66Ga 0.34N. However, a dry etch recess followed by n +-GaN regrowth fabrication process is reported as a means to obtain lower contact resistivity ohmic contacts onmore » a Al 0.85Ga 0.15N/Al 0.66Ga 0.34N heterostructure. In conclusion, specific contact resistivity of 5×10 -3 Ω cm 2 was achieved after annealing Ti/Al/Ni/Au metallization.« less

  11. Scleral contact lenses for the management of complicated ptosis.

    PubMed

    Katsoulos, Konstantinos; Rallatos, Gerasimos Livir; Mavrikakis, Ioannis

    2018-06-01

    To present the management of three patients suffering from ptosis of various etiologies, with scleral contact lenses. Three patients (five eyes) with ptosis resulting from levator dehiscence due to long-term rigid gas permeable contact lens wear for keratoconus, phthisis bulbi, and myopathy due to Kearns-Sayre syndrome were identified during a 2-year period. They were fitted with scleral contact lenses in order to provide cosmesis by lifting the upper eyelid with the bulk of the lens, and simultaneously provide vision correction where applicable. The scleral contact lenses provided comfortable wear, significantly improved cosmesis as both palpebral aperture and marginal reflex distance were increased, and visual acuity was also subjectively and objectively improved. Two of the patients opted for the scleral contact lenses, whereas the parents of the third patient, a 10-year-old girl with Kearns-Sayre syndrome, chose to undergo ptosis surgery due to handling issues of the scleral contact lenses. Scleral contact lenses can be a useful addition to the treatment option for patients with complicated ptosis.

  12. Contact Patterns in a High School: A Comparison between Data Collected Using Wearable Sensors, Contact Diaries and Friendship Surveys.

    PubMed

    Mastrandrea, Rossana; Fournet, Julie; Barrat, Alain

    2015-01-01

    Given their importance in shaping social networks and determining how information or transmissible diseases propagate in a population, interactions between individuals are the subject of many data collection efforts. To this aim, different methods are commonly used, ranging from diaries and surveys to decentralised infrastructures based on wearable sensors. These methods have each advantages and limitations but are rarely compared in a given setting. Moreover, as surveys targeting friendship relations might suffer less from memory biases than contact diaries, it is interesting to explore how actual contact patterns occurring in day-to-day life compare with friendship relations and with online social links. Here we make progresses in these directions by leveraging data collected in a French high school and concerning (i) face-to-face contacts measured by two concurrent methods, namely wearable sensors and contact diaries, (ii) self-reported friendship surveys, and (iii) online social links. We compare the resulting data sets and find that most short contacts are not reported in diaries while long contacts have a large reporting probability, and that the durations of contacts tend to be overestimated in the diaries. Moreover, measured contacts corresponding to reported friendship can have durations of any length but all long contacts do correspond to a reported friendship. On the contrary, online links that are not also reported in the friendship survey correspond to short face-to-face contacts, highlighting the difference of nature between reported friendships and online links. Diaries and surveys suffer moreover from a low sampling rate, as many students did not fill them, showing that the sensor-based platform had a higher acceptability. We also show that, despite the biases of diaries and surveys, the overall structure of the contact network, as quantified by the mixing patterns between classes, is correctly captured by both networks of self-reported contacts and

  13. Contact Patterns in a High School: A Comparison between Data Collected Using Wearable Sensors, Contact Diaries and Friendship Surveys

    PubMed Central

    Mastrandrea, Rossana; Fournet, Julie; Barrat, Alain

    2015-01-01

    Given their importance in shaping social networks and determining how information or transmissible diseases propagate in a population, interactions between individuals are the subject of many data collection efforts. To this aim, different methods are commonly used, ranging from diaries and surveys to decentralised infrastructures based on wearable sensors. These methods have each advantages and limitations but are rarely compared in a given setting. Moreover, as surveys targeting friendship relations might suffer less from memory biases than contact diaries, it is interesting to explore how actual contact patterns occurring in day-to-day life compare with friendship relations and with online social links. Here we make progresses in these directions by leveraging data collected in a French high school and concerning (i) face-to-face contacts measured by two concurrent methods, namely wearable sensors and contact diaries, (ii) self-reported friendship surveys, and (iii) online social links. We compare the resulting data sets and find that most short contacts are not reported in diaries while long contacts have a large reporting probability, and that the durations of contacts tend to be overestimated in the diaries. Moreover, measured contacts corresponding to reported friendship can have durations of any length but all long contacts do correspond to a reported friendship. On the contrary, online links that are not also reported in the friendship survey correspond to short face-to-face contacts, highlighting the difference of nature between reported friendships and online links. Diaries and surveys suffer moreover from a low sampling rate, as many students did not fill them, showing that the sensor-based platform had a higher acceptability. We also show that, despite the biases of diaries and surveys, the overall structure of the contact network, as quantified by the mixing patterns between classes, is correctly captured by both networks of self-reported contacts and

  14. Discontinuous contact line motion of evaporating particle-laden droplet on superhydrophobic surfaces

    NASA Astrophysics Data System (ADS)

    Yamada, Yutaka; Horibe, Akihiko

    2018-04-01

    The three-phase contact line motion on a superhydrophobic surface through particle-laden sessile droplet evaporation was investigated. Sample surfaces with micro- and nanoscale structures were generated by various durations of chemical treatment and Si O2 spherical particles with different sizes were used as additives of test liquid. The contact angle and contact radius profiles were studied, and the discontinuous motion of those profiles on micro- and nanostructured hierarchical surfaces was observed, while it was not observed on a nanostructured superhydrophobic surface. Suspensions with low particle concentration induced a relatively large contact radius jump compared to the high-concentrated condition; in contrast, the previous report showed the opposite trend for flat surfaces. In order to explain this result, a simple explanation was provided—that the stacked particles at the contact line region suppressed to the deformation of the liquid-vapor interface near the contact line. This is confirmed by side-view images of the deposition results because the contact line region after evaporation of the dense suspension showed a large contact angle compared to that of the diluted suspension. In addition, deposition at the contact line region was observed by scanning electron microscopy to discuss the effect of the characteristic length scale of the surface structure and particles on the contact line motion. We believe that these results will help one to understand the deposition phenomenon during particle-laden droplet evaporation on the superhydrophobic surface and its applications such as evaporation-driven materials deposition.

  15. Eye Contact Modulates Cognitive Processing Differently in Children with Autism

    ERIC Educational Resources Information Center

    Falck-Ytter, Terje; Carlström, Christoffer; Johansson, Martin

    2015-01-01

    In humans, effortful cognitive processing frequently takes place during social interaction, with eye contact being an important component. This study shows that the effect of eye contact on memory for nonsocial information is different in children with typical development than in children with autism, a disorder of social communication. Direct…

  16. Adaptive contact networks change effective disease infectiousness and dynamics.

    PubMed

    Van Segbroeck, Sven; Santos, Francisco C; Pacheco, Jorge M

    2010-08-19

    Human societies are organized in complex webs that are constantly reshaped by a social dynamic which is influenced by the information individuals have about others. Similarly, epidemic spreading may be affected by local information that makes individuals aware of the health status of their social contacts, allowing them to avoid contact with those infected and to remain in touch with the healthy. Here we study disease dynamics in finite populations in which infection occurs along the links of a dynamical contact network whose reshaping may be biased based on each individual's health status. We adopt some of the most widely used epidemiological models, investigating the impact of the reshaping of the contact network on the disease dynamics. We derive analytical results in the limit where network reshaping occurs much faster than disease spreading and demonstrate numerically that this limit extends to a much wider range of time scales than one might anticipate. Specifically, we show that from a population-level description, disease propagation in a quickly adapting network can be formulated equivalently as disease spreading on a well-mixed population but with a rescaled infectiousness. We find that for all models studied here--SI, SIS and SIR--the effective infectiousness of a disease depends on the population size, the number of infected in the population, and the capacity of healthy individuals to sever contacts with the infected. Importantly, we indicate how the use of available information hinders disease progression, either by reducing the average time required to eradicate a disease (in case recovery is possible), or by increasing the average time needed for a disease to spread to the entire population (in case recovery or immunity is impossible).

  17. American Contact Dermatitis Society Contact Allergy Management Program: An Epidemiologic Tool to Determine Relative Prevalence of Contact Allergens.

    PubMed

    Scheman, Andrew; Severson, David

    2016-01-01

    Data on the prevalence of contact allergy in North America are currently reported by groups of academic contact allergy specialists at select academic centers. Sampling of data from numerous centers across North America, including practices performing more limited patch testing, would provide a broader perspective of contact allergen prevalence in North America. The American Contact Dermatitis Society Contact Allergy Management Program is an ideal tool for collection of epidemiologic data regarding contact allergy prevalence in North America. The aim of the study was to identify the relative prevalence of contact allergy to common contact allergens in North America. Mapping of Contact Allergy Management Program (CAMP) data was performed to allow analysis of how frequently searches were performed for various contact allergens. The number of searches performed for specific allergens provides a measure of the relative prevalence of contact allergy to these allergens. The top 35 allergens for the period from November 18, 2012 to November 18, 2013 are reported. Although these data are useful, specific recommendations for minor alterations to CAMP are discussed, which will allow future CAMP data to be stratified and more powerful. With minor modifications, CAMP can provide a quantum leap in the reporting of contact allergy epidemiologic data in North America.

  18. Contact position sensor using constant contact force control system

    NASA Technical Reports Server (NTRS)

    Sturdevant, Jay (Inventor)

    1995-01-01

    A force control system (50) and method are provided for controlling a position contact sensor (10) so as to produce a constant controlled contact force therewith. The system (50) includes a contact position sensor (10) which has a contact probe (12) for contacting the surface of a target to be measured and an output signal (V.sub.o) for providing a position indication thereof. An actuator (30) is provided for controllably driving the contact position sensor (10) in response to an actuation control signal (I). A controller (52) receives the position indication signal (V.sub.o) and generates in response thereto the actuation control signal (I) so as to provide a substantially constant selective force (F) exerted by the contact probe (12). The actuation drive signal (I) is generated further in response to substantially linear approximation curves based on predetermined force and position data attained from the sensor (10) and the actuator (30).

  19. Acanthamoeba keratitis in Scotland: risk factors for contact lens wearers.

    PubMed

    Seal, D V; Kirkness, C M; Bennett, H G; Peterson, M

    1999-01-01

    To investigate risk factors for Acanthamoeba keratitis amongst contact lens wearers in Scotland. Patients with Acanthamoeba keratitis in the Scottish study, all of whom wore contact lenses, were compared with 46 healthy asymptomatic contact lens-wearing controls. They were all visited at home for contact lens and environmental microbiological sampling. In addition, all 288 optical practices in the West of Scotland were polled for contact lens types and disinfecting solutions sold in 1995, and a sample, each of whom fitted more than 500 contact lenses per year, were polled for a second time. Independently, a poll was commissioned by the Eyecare Information Service in July/August 1995 to estimate the numbers of contact lens wearers in Scotland and the UK. Industry was polled for numbers of each contact lens disinfecting regimen sold in Scotland in 1995. West of Scotland, UK. All contact lens wearers among the 3 million population of the West of Scotland Health Board Areas. Risk factors for Acanthamoeba infection and recommendations for its prevention. When Acanthamoeba infection occurred, patients' home water systems were frequently (54%) found to be colonised by this amoeba. Patients more frequently washed their storage cases in tap water than controls (P<0.05) with resulting contamination, kept storage cases wet rather than air drying them (P<0.05), and had coliform bacteria cultured from the storage case (P<0.05) and had viable Acanthamoeba within the storage case (P<0.0001). Overall, patients were found to have significantly more risk factors than controls (P<0.0001). The noncompliant use of chlorine tablet disinfection, or failure to disinfect contact lenses at all, was associated with increased risk (P<0.05). Ionic high water content contact lenses (FDA group 4 material), when used without disinfection or with non-compliant use of low chlorine (Soflab) tablet-based disinfection, were associated with increased risk of Acanthamoeba infection (P<0.05). In log

  20. Contact solution algorithms

    NASA Technical Reports Server (NTRS)

    Tielking, John T.

    1989-01-01

    Two algorithms for obtaining static contact solutions are described in this presentation. Although they were derived for contact problems involving specific structures (a tire and a solid rubber cylinder), they are sufficiently general to be applied to other shell-of-revolution and solid-body contact problems. The shell-of-revolution contact algorithm is a method of obtaining a point load influence coefficient matrix for the portion of shell surface that is expected to carry a contact load. If the shell is sufficiently linear with respect to contact loading, a single influence coefficient matrix can be used to obtain a good approximation of the contact pressure distribution. Otherwise, the matrix will be updated to reflect nonlinear load-deflection behavior. The solid-body contact algorithm utilizes a Lagrange multiplier to include the contact constraint in a potential energy functional. The solution is found by applying the principle of minimum potential energy. The Lagrange multiplier is identified as the contact load resultant for a specific deflection. At present, only frictionless contact solutions have been obtained with these algorithms. A sliding tread element has been developed to calculate friction shear force in the contact region of the rolling shell-of-revolution tire model.

  1. 76 FR 39900 - Agency Information Collection Activities: A National Repository for the Collection and Inventory...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ... or additional information, please contact Steven Avato, [email protected] , U.S. Bomb Data Center..., Tobacco, Firearms and Explosives (ATF)--United States Bomb Data Center (USBDC). State, Local and Tribal...

  2. Beta Atomic Contacts: Identifying Critical Specific Contacts in Protein Binding Interfaces

    PubMed Central

    Liu, Qian; Kwoh, Chee Keong; Hoi, Steven C. H.

    2013-01-01

    Specific binding between proteins plays a crucial role in molecular functions and biological processes. Protein binding interfaces and their atomic contacts are typically defined by simple criteria, such as distance-based definitions that only use some threshold of spatial distance in previous studies. These definitions neglect the nearby atomic organization of contact atoms, and thus detect predominant contacts which are interrupted by other atoms. It is questionable whether such kinds of interrupted contacts are as important as other contacts in protein binding. To tackle this challenge, we propose a new definition called beta (β) atomic contacts. Our definition, founded on the β-skeletons in computational geometry, requires that there is no other atom in the contact spheres defined by two contact atoms; this sphere is similar to the van der Waals spheres of atoms. The statistical analysis on a large dataset shows that β contacts are only a small fraction of conventional distance-based contacts. To empirically quantify the importance of β contacts, we design βACV, an SVM classifier with β contacts as input, to classify homodimers from crystal packing. We found that our βACV is able to achieve the state-of-the-art classification performance superior to SVM classifiers with distance-based contacts as input. Our βACV also outperforms several existing methods when being evaluated on several datasets in previous works. The promising empirical performance suggests that β contacts can truly identify critical specific contacts in protein binding interfaces. β contacts thus provide a new model for more precise description of atomic organization in protein quaternary structures than distance-based contacts. PMID:23630569

  3. 77 FR 74825 - Information Collection: Federal and Non-Federal Financial Assistant Instruments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-18

    ... recipient's accounting system and financial management capabilities. In addition to FFA, Congress created... addressed to Clark Woolley, USDA Forest Service, Director of Acquisitions Management, 1400 Independence Ave... INFORMATION CONTACT: Clark Woolley, Acquisitions Management, 703-605-4654. Individuals who use...

  4. Analysis of deep learning methods for blind protein contact prediction in CASP12.

    PubMed

    Wang, Sheng; Sun, Siqi; Xu, Jinbo

    2018-03-01

    Here we present the results of protein contact prediction achieved in CASP12 by our RaptorX-Contact server, which is an early implementation of our deep learning method for contact prediction. On a set of 38 free-modeling target domains with a median family size of around 58 effective sequences, our server obtained an average top L/5 long- and medium-range contact accuracy of 47% and 44%, respectively (L = length). A complete implementation has an average accuracy of 59% and 57%, respectively. Our deep learning method formulates contact prediction as a pixel-level image labeling problem and simultaneously predicts all residue pairs of a protein using a combination of two deep residual neural networks, taking as input the residue conservation information, predicted secondary structure and solvent accessibility, contact potential, and coevolution information. Our approach differs from existing methods mainly in (1) formulating contact prediction as a pixel-level image labeling problem instead of an image-level classification problem; (2) simultaneously predicting all contacts of an individual protein to make effective use of contact occurrence patterns; and (3) integrating both one-dimensional and two-dimensional deep convolutional neural networks to effectively learn complex sequence-structure relationship including high-order residue correlation. This paper discusses the RaptorX-Contact pipeline, both contact prediction and contact-based folding results, and finally the strength and weakness of our method. © 2017 Wiley Periodicals, Inc.

  5. Lipid transfer proteins do their thing anchored at membrane contact sites… but what is their thing?

    PubMed

    Wong, Louise H; Levine, Tim P

    2016-04-15

    Membrane contact sites are structures where two organelles come close together to regulate flow of material and information between them. One type of inter-organelle communication is lipid exchange, which must occur for membrane maintenance and in response to environmental and cellular stimuli. Soluble lipid transfer proteins have been extensively studied, but additional families of transfer proteins have been identified that are anchored into membranes by transmembrane helices so that they cannot diffuse through the cytosol to deliver lipids. If such proteins target membrane contact sites they may be major players in lipid metabolism. The eukaryotic family of so-called Lipid transfer proteins Anchored at Membrane contact sites (LAMs) all contain both a sterol-specific lipid transfer domain in the StARkin superfamily (related to StART/Bet_v1), and one or more transmembrane helices anchoring them in the endoplasmic reticulum (ER), making them interesting subjects for study in relation to sterol metabolism. They target a variety of membrane contact sites, including newly described contacts between organelles that were already known to make contact by other means. Lam1-4p target punctate ER-plasma membrane contacts. Lam5p and Lam6p target multiple contacts including a new category: vacuolar non-NVJ cytoplasmic ER (VancE) contacts. These developments confirm previous observations on tubular lipid-binding proteins (TULIPs) that established the importance of membrane anchored proteins for lipid traffic. However, the question remaining to be solved is the most difficult of all: are LAMs transporters, or alternately are they regulators that affect traffic more indirectly? © 2016 Authors; published by Portland Press Limited.

  6. 31 CFR 351.2 - How do I contact Public Debt?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES EE General Information § 351.2 How do I contact Public Debt? You may contact Public Debt by e-mail at [email protected], or by writing to the following address: Bureau of the Public Debt...

  7. Language Contact.

    ERIC Educational Resources Information Center

    Nelde, Peter Hans

    1995-01-01

    Examines the phenomenon of language contact and recent trends in linguistic contact research, which focuses on language use, language users, and language spheres. Also discusses the role of linguistic and cultural conflicts in language contact situations. (13 references) (MDM)

  8. After initial treatment for primary breast cancer: information needs, health literacy, and the role of health care workers.

    PubMed

    Schmidt, Anna; Ernstmann, Nicole; Wesselmann, Simone; Pfaff, Holger; Wirtz, Markus; Kowalski, Christoph

    2016-02-01

    After a short hospital stay of just some days follows long-term outpatient care for breast cancer patients. The aim of the study is to describe the information needs of breast cancer outpatients and to get in touch with aspects of health literacy, as well as contact various health care workers. In a multicenter study, patients were asked about their information needs 10 weeks after surgery. The analysis on hand includes data about 1248 female patients. In addition to descriptive analyses identifying the most prevalent information needs, logistic regression analyses were calculated to identify factors associated with these. The results show that information needs of breast cancer outpatients are mainly in "follow-up after acute treatment", "coping with long-term side effects", and "heredity of breast cancer". In addition to sociodemographic patient characteristics, perceived helpful contacts with various health care workers as well as a satisfactory patient's level of health literacy reduced the probability of unmet information needs. Breast cancer outpatients have numerous information needs. In addition to provide information at the right time regarding a specific disease phase, it is important that health professionals' support affected breast cancer patients in coping with the new situation.

  9. Forensic Analysis of a Contact Lens in a Murder Case.

    PubMed

    Zwerling, Charles S

    2016-03-01

    Contact lenses have had rare relevance in trials and/or investigations. After 5 years of burial, orbital remnants were retrieved from an exhumed body and subsequently identified as a key piece of material evidence in a murder trial. The exhumed case materials were evaluated under laboratory conditions and were determined to be contact lens remnants. Contact lens fracture and burial simulation studies were performed to provide additional corroboration of the physical findings of the exhumed contact lens remnants. This material evidence was instrumental in providing factual proof refuting the defendant's testimony in the murder trial. A brief history of contact lens composition and use is provided for understanding the methods and observational results. This forensic case study represents the first published documentation of a contact lens from an exhumed body being used in a murder investigation and establishes an operational procedure for future forensic contact lens examinations. © 2016 American Academy of Forensic Sciences.

  10. Genotoxicity testing approaches for the safety assessment of substances used in food contact materials prior to their authorization in the European Union.

    PubMed

    Bolognesi, Claudia; Castoldi, Anna F; Crebelli, Riccardo; Barthélémy, Eric; Maurici, Daniela; Wölfle, Detlef; Volk, Katharina; Castle, Laurence

    2017-06-01

    Food contact materials are all materials and articles intended to come directly or indirectly into contact with food. Before being included in the positive European "Union list" of authorized substances (monomers, other starting substances and additives) for plastic food contact materials, the European Food Safety Authority (EFSA) must assess their safety "in use". If relevant for risk, the safety of the main impurities, reaction and degradation products originating from the manufacturing process is also evaluated. Information on genotoxicity is always required irrespective of the extent of migration and the resulting human exposure, in view of the theoretical lack of threshold for genotoxic events. The 2008 EFSA approach, requiring the testing of food contact materials in three in vitro mutagenicity tests, though still acceptable, is now superseded by the 2011 EFSA Scientific Committee's recommendation for only two complementary tests including a bacterial gene mutation test and an in vitro micronucleus test, to detect two main genetic endpoints (i.e., gene mutations and chromosome aberrations). Follow-up of in vitro positive results depends on the type of genetic effect and on the substance's systemic availability. In this study, we provide an analysis of the data on genotoxicity testing gathered by EFSA on food contact materials for the period 1992-2015. We also illustrate practical examples of the approaches that EFSA took when evaluating "non standard" food contact chemicals (e.g., polymeric additives, oligomer or other reaction mixtures, and nanosubstances). Additionally, EFSA's experience gained from using non testing methods and/or future possibilities in this area are discussed. Environ. Mol. Mutagen. 58:361-374, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  11. Targeted tuberculosis contact investigation saves money without sacrificing health.

    PubMed

    Pisu, Maria; Gerald, Joe; Shamiyeh, James E; Bailey, William C; Gerald, Lynn B

    2009-01-01

    Health departments require an efficient strategy to investigate individuals exposed to Mycobacterium tuberculosis. The contact priority model (CPM) uses a decision rule to minimize testing of low-risk contacts; however, its impact on costs and disease control is unknown. A cost-effectiveness analysis compared the CPM with the traditional concentric circle approach (CCA) in a simulated population of 1000 healthy, community-dwelling adults with a 10% background rate of latent tuberculosis (TB) infection. The analysis was conducted from the perspective of the Alabama Department of Public Health. Model inputs were derived from the literature and the Alabama Department of Public Health. Lifetime costs (2004 dollars) and outcomes were discounted 3 percent annually. Incremental cost-effectiveness ratios were used to compare the strategies. Over the lifetime of 1000 simulated contacts, the CPM saved $45,000 but led to 0.5 additional TB cases and 0.24 fewer years of life. The CCA is more effective than the CPM, but it costs $92,934 to prevent one additional TB case and $185,920 to gain one additional life year. The CPM reduces costs with minimal loss of disease control and is a viable alternative to the CCA under most conditions.

  12. Detection of the local sliding in the tyre-road contact by measuring vibrations on the inner liner of the tyre

    NASA Astrophysics Data System (ADS)

    Niskanen, Arto J.; Tuononen, Ari J.

    2017-04-01

    Intelligent tyres can provide vital information from the tyre-road contact, especially for autonomous cars and intelligent infrastructure. In this paper, the acceleration measured on the inner liner of a tyre is used to detect the local sliding in the tyre-road contact. The Hilbert-Huang transform is utilized to extract the relevant vibration components and localize them in the wheel rotation angle domain. The energy of the vibration in the trailing part of the contact is shown to increase in low-friction conditions which can be related to the sliding of the tread part as a result of the shear stresses exceeding the local friction limit. To separate the effect of the surface roughness and the friction, different road surfaces were used in the measurements. In addition, the effects of different driving manoeuvres on the measured accelerations and the propagation of the sliding zone in the contact patch during braking are illustrated.

  13. Surrogate modeling of deformable joint contact using artificial neural networks.

    PubMed

    Eskinazi, Ilan; Fregly, Benjamin J

    2015-09-01

    Deformable joint contact models can be used to estimate loading conditions for cartilage-cartilage, implant-implant, human-orthotic, and foot-ground interactions. However, contact evaluations are often so expensive computationally that they can be prohibitive for simulations or optimizations requiring thousands or even millions of contact evaluations. To overcome this limitation, we developed a novel surrogate contact modeling method based on artificial neural networks (ANNs). The method uses special sampling techniques to gather input-output data points from an original (slow) contact model in multiple domains of input space, where each domain represents a different physical situation likely to be encountered. For each contact force and torque output by the original contact model, a multi-layer feed-forward ANN is defined, trained, and incorporated into a surrogate contact model. As an evaluation problem, we created an ANN-based surrogate contact model of an artificial tibiofemoral joint using over 75,000 evaluations of a fine-grid elastic foundation (EF) contact model. The surrogate contact model computed contact forces and torques about 1000 times faster than a less accurate coarse grid EF contact model. Furthermore, the surrogate contact model was seven times more accurate than the coarse grid EF contact model within the input domain of a walking motion. For larger input domains, the surrogate contact model showed the expected trend of increasing error with increasing domain size. In addition, the surrogate contact model was able to identify out-of-contact situations with high accuracy. Computational contact models created using our proposed ANN approach may remove an important computational bottleneck from musculoskeletal simulations or optimizations incorporating deformable joint contact models. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

  14. Surrogate Modeling of Deformable Joint Contact using Artificial Neural Networks

    PubMed Central

    Eskinazi, Ilan; Fregly, Benjamin J.

    2016-01-01

    Deformable joint contact models can be used to estimate loading conditions for cartilage-cartilage, implant-implant, human-orthotic, and foot-ground interactions. However, contact evaluations are often so expensive computationally that they can be prohibitive for simulations or optimizations requiring thousands or even millions of contact evaluations. To overcome this limitation, we developed a novel surrogate contact modeling method based on artificial neural networks (ANNs). The method uses special sampling techniques to gather input-output data points from an original (slow) contact model in multiple domains of input space, where each domain represents a different physical situation likely to be encountered. For each contact force and torque output by the original contact model, a multi-layer feed-forward ANN is defined, trained, and incorporated into a surrogate contact model. As an evaluation problem, we created an ANN-based surrogate contact model of an artificial tibiofemoral joint using over 75,000 evaluations of a fine-grid elastic foundation (EF) contact model. The surrogate contact model computed contact forces and torques about 1000 times faster than a less accurate coarse grid EF contact model. Furthermore, the surrogate contact model was seven times more accurate than the coarse grid EF contact model within the input domain of a walking motion. For larger input domains, the surrogate contact model showed the expected trend of increasing error with increasing domain size. In addition, the surrogate contact model was able to identify out-of-contact situations with high accuracy. Computational contact models created using our proposed ANN approach may remove an important computational bottleneck from musculoskeletal simulations or optimizations incorporating deformable joint contact models. PMID:26220591

  15. [Facial allergic contact dermatitis. Data from the IVDK and review of literature].

    PubMed

    Schnuch, A; Szliska, C; Uter, W

    2009-01-01

    The face is exposed to many foreign substances and may thus be a site of allergic contact dermatitis. Our aim is to elucidate the spectrum of factors associated with facial dermatitis by analyzing data of patients patch tested in the Information Network of Departments of Dermatology (IVDK) between 1995 and 2007. In 18,572 patients the main anatomical site of dermatitis was the face. Among these, the proportion of females and of patients with past or present atopic eczema was increased, while probable occupational causation was less common than in the overall group. Cosmetic allergens, as well as nickel, were significantly more common in women than men, including fragrance mix (10.8% vs. 8.3%), p-phenylenediamine (4.0% vs. 2.8%), lanolin alcohols (3.0% vs. 2.2%), Lyral(TM) (3.1% vs. 2.0%) and bufexamac (1.8% vs. 1.1%). In comparison, only epoxy resin contact allergy was diagnosed significantly more often in men than women: In patients with airborne contact dermatitis, over-represented allergens included sesquiterpene lactone mix, compositae mix, epoxy resin, (chloro-) methylisothiazolinone and oil of turpentine. In the clinical approach to patients with facial dermatitis, occupational airborne causation should be considered in addition to non-occupational (e.g., cosmetic) allergen exposure.

  16. Validation of Contact-Free Sleep Monitoring Device with Comparison to Polysomnography

    PubMed Central

    Tal, Asher; Shinar, Zvika; Shaki, David; Codish, Shlomi; Goldbart, Aviv

    2017-01-01

    Study Objectives: To validate a contact-free system designed to achieve maximal comfort during long-term sleep monitoring, together with high monitoring accuracy. Methods: We used a contact-free monitoring system (EarlySense, Ltd., Israel), comprising an under-the-mattress piezoelectric sensor and a smartphone application, to collect vital signs and analyze sleep. Heart rate (HR), respiratory rate (RR), body movement, and calculated sleep-related parameters from the EarlySense (ES) sensor were compared to data simultaneously generated by the gold standard, polysomnography (PSG). Subjects in the sleep laboratory underwent overnight technician-attended full PSG, whereas subjects at home were recorded for 1 to 3 nights with portable partial PSG devices. Data were compared epoch by epoch. Results: A total of 63 subjects (85 nights) were recorded under a variety of sleep conditions. Compared to PSG, the contact-free system showed similar values for average total sleep time (TST), % wake, % rapid eye movement, and % non-rapid eye movement sleep, with 96.1% and 93.3% accuracy of continuous measurement of HR and RR, respectively. We found a linear correlation between TST measured by the sensor and TST determined by PSG, with a coefficient of 0.98 (R = 0.87). Epoch-by-epoch comparison with PSG in the sleep laboratory setting revealed that the system showed sleep detection sensitivity, specificity, and accuracy of 92.5%, 80.4%, and 90.5%, respectively. Conclusions: TST estimates with the contact-free sleep monitoring system were closely correlated with the gold-standard reference. This system shows good sleep staging capability with improved performance over accelerometer-based apps, and collects additional physiological information on heart rate and respiratory rate. Citation: Tal A, Shinar Z, Shaki D, Codish S, Goldbart A. Validation of contact-free sleep monitoring device with comparison to polysomnography. J Clin Sleep Med. 2017;13(3):517–522. PMID:27998378

  17. Systems and Methods for Designing and Fabricating Contact-Free Support Structures for Overhang Geometries of Parts in Powder-Bed Metal Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Cooper, Kenneth (Inventor); Chou, Yuag-Shan (Inventor)

    2017-01-01

    Systems and methods are provided for designing and fabricating contact-free support structures for overhang geometries of parts fabricated using electron beam additive manufacturing. One or more layers of un-melted metallic powder are disposed in an elongate gap between an upper horizontal surface of the support structure and a lower surface of the overhang geometry. The powder conducts heat from the overhang geometry to the support structure. The support structure acts as a heat sink to enhance heat transfer and reduce the temperature and severe thermal gradients due to poor thermal conductivity of metallic powders underneath the overhang. Because the support structure is not connected to the part, the support structure can be removed freely without any post-processing step.

  18. Contact | Office of Cancer Genomics

    Cancer.gov

    For more information about the Office of Cancer Genomics, please contact: Office of Cancer Genomics National Cancer Institute 31 Center Drive, 10A07 Bethesda, Maryland 20892-2580 Phone: (240) 781-3280 Fax: (240) 541-4510 Email: ocg@mail.nih.gov *Please note that this site will not function properly in Internet Explorer unless you completely turn off the Compatibility View*

  19. 5 CFR 2600.102 - Contact information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., educational and reference purposes are available electronically on OGE's Internet Web site (http://www.usoge.gov). The Web site has copies of various Executive orders, statutes, and regulations that together.... OGE does not have any regional offices. (b) Web site. Information about OGE and its role in the...

  20. 5 CFR 2600.102 - Contact information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., educational and reference purposes are available electronically on OGE's Internet Web site (http://www.usoge.gov). The Web site has copies of various Executive orders, statutes, and regulations that together.... OGE does not have any regional offices. (b) Web site. Information about OGE and its role in the...

  1. 5 CFR 2600.102 - Contact information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... OGE does not have any regional offices. (b) Web site. Information about OGE and its role in the executive branch ethics program as well as copies of publications that have been developed for training, educational and reference purposes are available electronically on OGE's Internet Web site (http://www.usoge...

  2. 5 CFR 2600.102 - Contact information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... OGE does not have any regional offices. (b) Web site. Information about OGE and its role in the..., educational and reference purposes are available electronically on OGE's Internet Web site (http://www.usoge.gov). The Web site has copies of various Executive orders, statutes, and regulations that together...

  3. 76 FR 17147 - Proposed Information Collection; Monitoring Recovered Species After Delisting-American Peregrine...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-28

    ... additional information about this IC, contact Hope Grey at the e-mail address in ADDRESSES or at 703-358-2482... recovered species be conducted for not less than 5 years, the life history of American peregrine falcons is...

  4. National Biological Information Infrastructure (NBII) | Information Center

    Science.gov Websites

    National Biological Information Infrastructure (NBII) Contact Information Website: http://www.nbii.gov/ The National Biological Information Infrastructure (NBII) is a broad, collaborative program to provide increased access to data and information on the nation's biological resources. The NBII links diverse, high

  5. Contact Us | Frederick National Laboratory for Cancer Research

    Cancer.gov

    The ATOM Consortium is actively seeking additional partnerships with qualified pharma, biotech, technology, academic, government, and other organizations. If you are interested in getting involved,please contact: info@atomscience.org F

  6. Dynamics of fingertip contact during the onset of tangential slip

    PubMed Central

    Delhaye, Benoit; Lefèvre, Philippe; Thonnard, Jean-Louis

    2014-01-01

    Through highly precise perceptual and sensorimotor activities, the human tactile system continuously acquires information about the environment. Mechanical interactions between the skin at the point of contact and a touched surface serve as the source of this tactile information. Using a dedicated custom robotic platform, we imaged skin deformation at the contact area between the finger and a flat surface during the onset of tangential sliding movements in four different directions (proximal, distal, radial and ulnar) and with varying normal force and tangential speeds. This simple tactile event evidenced complex mechanics. We observed a reduction of the contact area while increasing the tangential force and proposed to explain this phenomenon by nonlinear stiffening of the skin. The deformation's shape and amplitude were highly dependent on stimulation direction. We conclude that the complex, but highly patterned and reproducible, deformations measured in this study are a potential source of information for the central nervous system and that further mechanical measurement are needed to better understand tactile perceptual and motor performances. PMID:25253033

  7. Nanoparticle-wetted surfaces for relays and energy transmission contacts.

    PubMed

    Voevodin, Andrey A; Vaia, Richard A; Patton, Steven T; Diamanti, Steven; Pender, Mark; Yoonessi, Mitra; Brubaker, Jennifer; Hu, Jian-Jun; Sanders, Jeffrey H; Phillips, Benjamin S; MacCuspie, Robert I

    2007-11-01

    Submonolayer coatings of noble-metal nanoparticle liquids (NPLs) are shown to provide replenishable surfaces with robust asperities and metallic conductivity that extends the durability of electrical relays by 10 to 100 times (depending on the current driven through the contact) as compared to alternative approaches. NPLs are single-component materials consisting of a metal nanoparticle core (5-20 nm Au or Pt nanoparticles) surrounded by a covalently tethered ionic-liquid corona of 1.5 to 2 nm. Common relay failure modes, such as stiction, surface distortion, and contact shorting, are suppressed with the addition of a submonolayer of NPLs to the contact surfaces. This distribution of NPLs results in a force profile for a contact-retraction cycle that is distinct from bare Au contacts and thicker, multilayer coatings of NPLs. Postmortem examination reveals a substantial decrease in topological change of the electrode surface relative to bare contacts, as well as an indication of lateral migration of the nanoparticles from the periphery towards the contact. A general extension of this concept to dynamic physical interfaces experiencing impact, sliding, or rolling affords alternatives to increase reliability and reduced losses for transmittance of electrical and mechanical energy.

  8. American Contact Dermatitis Society Core Allergen Series: 2017 Update.

    PubMed

    Schalock, Peter C; Dunnick, Cory A; Nedorost, Susan; Brod, Bruce; Warshaw, Erin; Mowad, Christen

    The American Contact Dermatitis Society Core Allergen Series was introduced in 2012. After 4 years of use, changes in our recommended allergens are necessary. For the updated series, we have reordered the first 4 panels to approximately mirror the current TRUE Test and removed parthenolide, triclosan, glutaraldehyde, and jasmine. Polymyxin B, lavender, sodium benzoate, ethylhexylglycerin, and benzoic acid are new additions to the American Contact Dermatitis Society series.

  9. Contact dermatitis in children.

    PubMed

    Rademaker, M; Forsyth, A

    1989-02-01

    125 children under the age of 12 years were patch tested over a period of 7 years. 60 (48%) of the children had 1 or more positive (+ve) reactions, of which 92% (55/60) were considered relevant. The most common allergens were metals (35 + ves), fragrances (24 + ves) and rubber compounds (11 + ves). 40 of the children were also tested for contact urticaria against food additives and fragrances, of whom 20 were positive (benzoic acid 14, cinnamaldehyde 12).

  10. The Micromechanics of the Moving Contact Line

    NASA Technical Reports Server (NTRS)

    Han, Minsub; Lichter, Seth; Lin, Chih-Yu; Perng, Yeong-Yan

    1996-01-01

    The proposed research is divided into three components concerned with molecular structure, molecular orientation, and continuum averages of discrete systems. In the experimental program, we propose exploring how changes in interfacial molecular structure generate contact line motion. Rather than rely on the electrostatic and electrokinetic fields arising from the molecules themselves, we augment their interactions by an imposed field at the solid/liquid interface. By controling the field, we can manipulate the molecular structure at the solid/liquid interface. In response to controlled changes in molecular structure, we observe the resultant contact line motion. In the analytical portion of the proposed research we seek to formulate a system of equations governing fluid motion which accounts for the orientation of fluid molecules. In preliminary work, we have focused on describing how molecular orientation affects the forces generated at the moving contact line. Ideally, as assumed above, the discrete behavior of molecules can be averaged into a continuum theory. In the numerical portion of the proposed research, we inquire whether the contact line region is, in fact, large enough to possess a well-defined average. Additionally, we ask what types of behavior distinguish discrete systems from continuum systems. Might the smallness of the contact line region, in itself, lead to behavior different from that in the bulk? Taken together, our proposed research seeks to identify and accurately account for some of the molecular dynamics of the moving contact line, and attempts to formulate a description from which one can compute the forces at the moving contact line.

  11. 18 CFR 33.4 - Additional information requirements for applications involving vertical competitive impacts.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional information requirements for applications involving vertical competitive impacts. 33.4 Section 33.4 Conservation of Power... electricity products (i.e., downstream relevant products) in the same geographic markets or that the extent of...

  12. Fast Grasp Contact Computation for a Serial Robot

    NASA Technical Reports Server (NTRS)

    Hargrave, Brian (Inventor); Shi, Jianying (Inventor); Diftler, Myron A. (Inventor)

    2015-01-01

    A system includes a controller and a serial robot having links that are interconnected by a joint, wherein the robot can grasp a three-dimensional (3D) object in response to a commanded grasp pose. The controller receives input information, including the commanded grasp pose, a first set of information describing the kinematics of the robot, and a second set of information describing the position of the object to be grasped. The controller also calculates, in a two-dimensional (2D) plane, a set of contact points between the serial robot and a surface of the 3D object needed for the serial robot to achieve the commanded grasp pose. A required joint angle is then calculated in the 2D plane between the pair of links using the set of contact points. A control action is then executed with respect to the motion of the serial robot using the required joint angle.

  13. Apparent contact angle and contact angle hysteresis on liquid infused surfaces.

    PubMed

    Semprebon, Ciro; McHale, Glen; Kusumaatmaja, Halim

    2016-12-21

    We theoretically investigate the apparent contact angle and contact angle hysteresis of a droplet placed on a liquid infused surface. We show that the apparent contact angle is not uniquely defined by material parameters, but also has a dependence on the relative size between the droplet and its surrounding wetting ridge formed by the infusing liquid. We derive a closed form expression for the contact angle in the limit of vanishing wetting ridge, and compute the correction for small but finite ridge, which corresponds to an effective line tension term. We also predict contact angle hysteresis on liquid infused surfaces generated by the pinning of the contact lines by the surface corrugations. Our analytical expressions for both the apparent contact angle and contact angle hysteresis can be interpreted as 'weighted sums' between the contact angles of the infusing liquid relative to the droplet and surrounding gas phases, where the weighting coefficients are given by ratios of the fluid surface tensions.

  14. Contact drying: a review of experimental and mechanistic modeling approaches.

    PubMed

    Sahni, Ekneet Kaur; Chaudhuri, Bodhisattwa

    2012-09-15

    Drying is one of the most complex unit operations with simultaneous heat and mass transfer. The contact drying process is also not well understood as several physical phenomena occur concurrently. This paper reviews current experimental and modeling approaches employed towards a better understanding of the contact drying operation. Additionally, an overview of some fundamental aspects relating to contact drying is provided. A brief discussion of some model extensions such as incorporation of noncontact forces, interstitial fluids and attrition rate is also presented. Copyright © 2012 Elsevier B.V. All rights reserved.

  15. General Information about Ovarian Epithelial Cancer

    MedlinePlus

    ... the PDQ Adult Treatment Editorial Board . Clinical Trial Information A clinical trial is a study to answer ... Twitter Instagram YouTube Google+ LinkedIn GovDelivery RSS CONTACT INFORMATION Contact Us LiveHelp Online Chat MORE INFORMATION About ...

  16. General Information about Intraocular (Uveal) Melanoma

    MedlinePlus

    ... the PDQ Adult Treatment Editorial Board . Clinical Trial Information A clinical trial is a study to answer ... Twitter Instagram YouTube Google+ LinkedIn GovDelivery RSS CONTACT INFORMATION Contact Us LiveHelp Online Chat MORE INFORMATION About ...

  17. 78 FR 22937 - 60-Day Notice of Proposed Information Collection: Application for Additional Visa Pages or...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-17

    ...: Application for Additional Visa Pages or Miscellaneous Passport Services ACTION: Notice of request for public... Information Collection: Application for Additional Visa Pages or Miscellaneous Passport Services. OMB Control...: Bureau of Consular Affairs, Passport Services, Office of Program Management and Operational Support...

  18. Contact Us | NREL

    Science.gov Websites

    Contact Us Contact Us Find a contact to help answer your question, resolve a website issue, or job or internship, or want to report an issue with the application process, contact us about careers

  19. Contact-induced mitochondrial polarization supports HIV-1 virological synapse formation.

    PubMed

    Groppelli, Elisabetta; Starling, Shimona; Jolly, Clare

    2015-01-01

    Rapid HIV-1 spread between CD4 T lymphocytes occurs at retrovirus-induced immune cell contacts called virological synapses (VS). VS are associated with striking T cell polarization and localized virus budding at the site of contact that facilitates cell-cell spread. In addition to this, spatial clustering of organelles, including mitochondria, to the contact zone has been previously shown. However, whether cell-cell contact specifically induces dynamic T cell remodeling during VS formation and what regulates this process remain unclear. Here, we report that contact between an HIV-1-infected T cell and an uninfected target T cell specifically triggers polarization of mitochondria concomitant with recruitment of the major HIV-1 structural protein Gag to the site of cell-cell contact. Using fixed and live-cell imaging, we show that mitochondrial and Gag polarization in HIV-1-infected T cells occurs within minutes of contact with target T cells, requires the formation of stable cell-cell contacts, and is an active, calcium-dependent process. We also find that perturbation of mitochondrial polarization impairs cell-cell spread of HIV-1 at the VS. Taken together, these data suggest that HIV-1-infected T cells are able to sense and respond to contact with susceptible target cells and undergo dynamic cytoplasmic remodeling to create a synaptic environment that supports efficient HIV-1 VS formation between CD4 T lymphocytes. HIV-1 remains one of the major global health challenges of modern times. The capacity of HIV-1 to cause disease depends on the virus's ability to spread between immune cells, most notably CD4 T lymphocytes. Cell-cell transmission is the most efficient way of HIV-1 spread and occurs at the virological synapse (VS). The VS forms at the site of contact between an infected cell and an uninfected cell and is characterized by polarized assembly and budding of virions and clustering of cellular organelles, including mitochondria. Here, we show that cell

  20. Contact us

    Science.gov Websites

    DCIO R&A DCIO CS In the News Library Contact us contact us Contact the Department of Defense Public Queries for DOD General questions or comments concerning the DOD Veteran Affairs Public questions or comments concerning the Department of Veterans Affairs (VA) Army Public questions or comments concerning

  1. Contact angle hysteresis on superhydrophobic stripes.

    PubMed

    Dubov, Alexander L; Mourran, Ahmed; Möller, Martin; Vinogradova, Olga I

    2014-08-21

    We study experimentally and discuss quantitatively the contact angle hysteresis on striped superhydrophobic surfaces as a function of a solid fraction, ϕS. It is shown that the receding regime is determined by a longitudinal sliding motion of the deformed contact line. Despite an anisotropy of the texture the receding contact angle remains isotropic, i.e., is practically the same in the longitudinal and transverse directions. The cosine of the receding angle grows nonlinearly with ϕS. To interpret this we develop a theoretical model, which shows that the value of the receding angle depends both on weak defects at smooth solid areas and on the strong defects due to the elastic energy of the deformed contact line, which scales as ϕS(2)lnϕS. The advancing contact angle was found to be anisotropic, except in a dilute regime, and its value is shown to be determined by the rolling motion of the drop. The cosine of the longitudinal advancing angle depends linearly on ϕS, but a satisfactory fit to the data can only be provided if we generalize the Cassie equation to account for weak defects. The cosine of the transverse advancing angle is much smaller and is maximized at ϕS ≃ 0.5. An explanation of its value can be obtained if we invoke an additional energy due to strong defects in this direction, which is shown to be caused by the adhesion of the drop on solid sectors and is proportional to ϕS(2). Finally, the contact angle hysteresis is found to be quite large and generally anisotropic, but it becomes isotropic when ϕS ≤ 0.2.

  2. The Nature Contact Questionnaire: a measure of healthy workplace exposure.

    PubMed

    Largo-Wight, Erin; Chen, W William; Dodd, Virginia; Weiler, Robert

    2011-01-01

    Understanding and promoting healthy workplaces is an important and growing area of interest in occupational health. Nature contact is a central component to the study of and promotion of healthy places. Previous findings suggest that nature contact influences health via stress appraisal process. Currently, there are no known comprehensive valid and reliable measures of nature contact, which presents obstacles to research and worksite health promotion. This study was designed to develop and test an instrument to measure nature contact at work, entitled the Nature Contact Questionnaire (NCQ), 16-item self-reported checklist to measure actual exposure. A sample of 503 (30% response rate) office staff completed the questionnaire. Office staff were sent an email with a link to the electronic survey twice, two weeks apart. Content and construct validity (KMO=0.68), internal consistency (Alpha=0.64), and test-retest reliability (r=0.85, p<0.01) were established. The NCQ is the first known comprehensive, reliable and valid survey to measure nature contact, which allows research to compare forms of nature contact to best inform practice and design of healthy places.

  3. Measuring contact area in a sliding human finger-pad contact.

    PubMed

    Liu, X; Carré, M J; Zhang, Q; Lu, Z; Matcher, S J; Lewis, R

    2018-02-01

    The work outlined in this paper was aimed at achieving further understanding of skin frictional behaviour by investigating the contact area between human finger-pads and flat surfaces. Both the static and the dynamic contact areas (in macro- and micro-scales) were measured using various techniques, including ink printing, optical coherence tomography (OCT) and Digital Image Correlation (DIC). In the studies of the static measurements using ink printing, the experimental results showed that the apparent and the real contact area increased with load following a piecewise linear correlation function for a finger-pad in contact with paper sheets. Comparisons indicated that the OCT method is a reliable and effective method to investigate the real contact area of a finger-pad and allow micro-scale analysis. The apparent contact area (from the DIC measurements) was found to reduce with time in the transition from the static phase to the dynamic phase while the real area of contact (from OCT) increased. The results from this study enable the interaction between finger-pads and contact object surface to be better analysed, and hence improve the understanding of skin friction. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. A Catalog of 1022 Bright Contact Binary Stars

    NASA Astrophysics Data System (ADS)

    Gettel, S. J.; Geske, M. T.; McKay, T. A.

    2006-01-01

    In this work we describe a large new sample of contact binary stars extracted in a uniform manner from sky patrol data taken by the ROTSE-I telescope. Extensive ROTSE-I light-curve data are combined with J-, H-, and K-band near-infrared data taken from the Two Micron All Sky Survey to add color information. Contact binary candidates are selected using the observed period-color relation. Candidates are confirmed by visual examination of the light curves. To enhance the utility of this catalog, we derive a new J-H period-color-luminosity relation and use this to estimate distances for the entire catalog. From these distance estimates we derive an estimated contact binary space density of (1.7+/-0.6)×10-5 pc-3.

  5. Contact chemosensation of phytochemicals by insect herbivores

    PubMed Central

    Burse, Antje

    2017-01-01

    Contact chemosensation, or tasting, is a complex process governed by nonvolatile phytochemicals that tell host-seeking insects whether they should accept or reject a plant. During this process, insect gustatory receptors (GRs) contribute to deciphering a host plant's metabolic code. GRs recognise many different classes of nonvolatile compounds; some GRs are likely to be narrowly tuned and others, broadly tuned. Although primary and/or secondary plant metabolites influence the insect's feeding choice, their decoding by GRs is challenging, because metabolites in planta occur in complex mixtures that have additive or inhibitory effects; in diverse forms composed of structurally unrelated molecules; and at different concentrations depending on the plant species, its tissue and developmental stage. Future studies of the mechanism of insect herbivore GRs will benefit from functional characterisation taking into account the spatio-temporal dynamics and diversity of the plant's metabolome. Metabolic information, in turn, will help to elucidate the impact of single ligands and complex natural mixtures on the insect's feeding choice. PMID:28485430

  6. 78 FR 36236 - Proposed Information Collection; Federal Fish and Wildlife Permit Applications and Reports-Law...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-17

    ... 2042-- PDM, 4401 North Fairfax Drive, Arlington, VA 22203 (mail); or hope_grey@fws.gov (email). Please... additional information about this IC, contact Hope Grey at hope_grey@fws.gov (email) or 703- 358-2482...

  7. An audit of chronic hepatitis B contact tracing in metropolitan Western Australia.

    PubMed

    Mascarenhas, Lester; Mak, Donna B

    2014-03-01

    People with chronic hepatitis B (CHB) are a source of transmission and those in contact with them are a national priority population for hepatitis B testing and vaccination. This audit examined contact tracing success rate and barriers. Success was defined as contacts tested and vaccinated if required. An online survey of 26 general practitioners (GPs), and computer-assisted telephone interviews of 40 patients with CHB notified between 1 September 2011 and 1 September 2012. Half of the patients with CHB (16/31) were asked to take responsibility for informing contacts; contacts of five patients were traced by doctors and those of three patients were traced by nurses. The overall success rate was 75%. Contact tracing by nurses was 100% successful; after excluding nurse contact tracing from the analysis, the success rate was 57%. GPs reported 'insufficient resources' as the most frequent doctor-related barrier to contact tracing and 58% of doctors reported that public health units should be responsible for contact tracing. Increasing contact tracing by nurses could improve success rates. Public health unit assistance for contact tracing of complex cases should continue.

  8. Contact lens complications.

    PubMed

    Suchecki, Jeanine K; Donshik, Peter; Ehlers, William H

    2003-09-01

    Complications associated with contact lenses range from mild to severe and occur with all lens modalities. Contact lens wear can cause a change in corneal physiology, which can lead to epithelial, stromal, and endothelial compromise. Other complications include lens deposition, allergic conjunctivitis, giant papillary conjunctivitis, peripheral infiltrates, microbial keratitis, and neovascularization. Pre-existing conditions can contribute to these complications, or they can occur in association with contact lens wear and care regimens. Patient-related factors, such as alteration of the recommended wearing or replacement schedules and noncompliance with recommended contact lens care regimens for economic reasons, convenience, or in error, contribute to contact lens-related complications and have led to difficulty in accurate determination of complication rates among the various lens wear modalities. Complications may require discontinuation of contact lenses, topical therapy, and changes in contact lens wearing schedules, materials, and care solutions. On initial lens fitting and follow-up evaluations, practitioners should review contact lens replacement and cleaning regimens with patients and discuss complications. To avoid serious complications, patients should be reminded to remove their contact lenses as soon as ocular irritation occurs, and to call their eye care practitioner immediately if symptoms persist.

  9. Interaction of the Human Contact System with Pathogens-An Update.

    PubMed

    Oehmcke-Hecht, Sonja; Köhler, Juliane

    2018-01-01

    The name human contact system is related to its mode of action, as "contact" with artificial negatively charged surfaces triggers its activation. Today, it is generally believed that the contact system is an inflammatory response mechanism not only against artificial material but also against misfolded proteins and foreign organisms. Upon activation, the contact system is involved in at least two distinct (patho)physiologic processes: i . the trigger of the intrinsic coagulation via factor XI and ii . the cleavage of high molecular weight kininogen with release of bradykinin and antimicrobial peptides (AMPs). Bradykinin is involved in the regulation of inflammatory processes, vascular permeability, and blood pressure. Due to the release of AMPs, the contact system is regarded as a branch of the innate immune defense against microorganisms. There is an increasing list of pathogens that interact with contact factors, in addition to bacteria also fungi and viruses bind and activate the system. In spite of that, pathogens have developed their own mechanisms to activate the contact system, resulting in manipulation of this host immune response. In this up-to-date review, we summarize present research on the interaction of pathogens with the human contact system, focusing particularly on bacterial and viral mechanisms that trigger inflammation via contact system activation.

  10. Contact allergy in cheilitis.

    PubMed

    O'Gorman, Susan M; Torgerson, Rochelle R

    2016-07-01

    Recalcitrant non-actinic cheilitis may indicate contact allergy. This study aimed to determine the prevalence of allergic contact cheilitis (ACC) in patients with non-actinic cheilitis and to identify the most relevant allergens. We used an institutional database to identify patients with non-actinic cheilitis who underwent patch testing between January 1, 2001, and August 31, 2011, and conducted a retrospective review of patch test results in these patients. Additional data were obtained from institutional electronic medical records. Ninety-one patients (70 [77%] female; mean age: 51 years) were included in the study. Almost half (41 [45%]) had a final diagnosis of ACC. Patch testing was performed in line with universally accepted methods, with application on day 1, allergen removal and an initial reading on day 3, and the final reading on day 5. The allergens of most significance were fragrance mix, Myroxylon pereirae resin, dodecyl gallate, octyl gallate, and benzoic acid. Nickel was the most relevant metal allergen. Contact allergy is an important consideration in recalcitrant cheilitis. Fragrances, antioxidants, and preservatives dominated the list of relevant allergens in our patients. Nickel and gold were among the top 10 allergens. Almost half (45%) of these patients had a final diagnosis of ACC. Patch testing beyond the oral complete series should be undertaken in any investigation of non-actinic cheilitis. © 2015 The International Society of Dermatology.

  11. 30 CFR 250.418 - What additional information must I submit with my APD?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must I submit with my APD? You must include the following with the APD: (a) Rated capacities of the drilling rig and major...

  12. Enhanced End-Contacts by Helium Ion Bombardment to Improve Graphene-Metal Contacts

    PubMed Central

    Jia, Kunpeng; Su, Yajuan; Zhan, Jun; Shahzad, Kashif; Zhu, Huilong; Zhao, Chao; Luo, Jun

    2016-01-01

    Low contact resistance between graphene and metals is of paramount importance to fabricate high performance graphene-based devices. In this paper, the impact of both defects induced by helium ion (He+) bombardment and annealing on the contact resistance between graphene and various metals (Ag, Pd, and Pt) were systematically explored. It is found that the contact resistances between all metals and graphene are remarkably reduced after annealing, indicating that not only chemically adsorbed metal (Pd) but also physically adsorbed metals (Ag and Pt) readily form end-contacts at intrinsic defect locations in graphene. In order to further improve the contact properties between Ag, Pd, and Pt metals and graphene, a novel method in which self-aligned He+ bombardment to induce exotic defects in graphene and subsequent thermal annealing to form end-contacts was proposed. By using this method, the contact resistance is reduced significantly by 15.1% and 40.1% for Ag/graphene and Pd/graphene contacts with He+ bombardment compared to their counterparts without He+ bombardment. For the Pt/graphene contact, the contact resistance is, however, not reduced as anticipated with He+ bombardment and this might be ascribed to either inappropriate He+ bombardment dose, or inapplicable method of He+ bombardment in reducing contact resistance for Pt/graphene contact. The joint efforts of as-formed end-contacts and excess created defects in graphene are discussed as the cause responsible for the reduction of contact resistance. PMID:28335286

  13. 76 FR 14825 - Core Principles and Other Requirements for Designated Contact Markets

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-18

    ... COMMODITY FUTURES TRADING COMMISSION 17 CFR Parts 1, 16, and 38 RIN 3038-AD09 Core Principles and Other Requirements for Designated Contact Markets AGENCY: Commodity Futures Trading Commission. ACTION... FURTHER INFORMATION CONTACT: Nancy Markowitz, Assistant Deputy Director, 202-418-5453, [email protected

  14. Contact allergy to essential oils: current patch test results (2000-2008) from the Information Network of Departments of Dermatology (IVDK).

    PubMed

    Uter, Wolfgang; Schmidt, Erich; Geier, Johannes; Lessmann, Holger; Schnuch, Axel; Frosch, Peter

    2010-11-01

    Essential oils are used in perfumery and in products for aromatherapy or balneotherapy. Previous studies have shown some to be important contact sensitizers. A practical diagnostic approach, based on the results of a large, central European network and other evidence, is needed. Data of the Information Network of Departments of Dermatology (IVDK; www.ivdk.org) on all patients patch tested between January 2000 and December 2008 with essential oils were retrospectively analysed. 15 682 patients of 84 716 consulting in the period had been tested with at least one essential oil, and 637 reacted positively to at least one of the essential oils, most commonly to ylang-ylang oil (I and II) (3.1% as weighted mean of positive tests in special series and consecutive testing), lemongrass oil (1.8%), jasmine absolute (1.6%), sandalwood oil and clove oil (1.5% each). Cross-reactivity between distillate and main allergen, if available, was marked. Patch testing the important essential oils should be considered in patients with a suggestive history. Additionally, culprit products brought in by the patient should be tested, closing a diagnostic gap by (i) including those other essential oils not included in the commercial test series and (ii) providing a means of testing with the oxidized substances to which the patient had actually been exposed. © 2010 John Wiley & Sons A/S.

  15. Validation of Contact-Free Sleep Monitoring Device with Comparison to Polysomnography.

    PubMed

    Tal, Asher; Shinar, Zvika; Shaki, David; Codish, Shlomi; Goldbart, Aviv

    2017-03-15

    To validate a contact-free system designed to achieve maximal comfort during long-term sleep monitoring, together with high monitoring accuracy. We used a contact-free monitoring system (EarlySense, Ltd., Israel), comprising an under-the-mattress piezoelectric sensor and a smartphone application, to collect vital signs and analyze sleep. Heart rate (HR), respiratory rate (RR), body movement, and calculated sleep-related parameters from the EarlySense (ES) sensor were compared to data simultaneously generated by the gold standard, polysomnography (PSG). Subjects in the sleep laboratory underwent overnight technician-attended full PSG, whereas subjects at home were recorded for 1 to 3 nights with portable partial PSG devices. Data were compared epoch by epoch. A total of 63 subjects (85 nights) were recorded under a variety of sleep conditions. Compared to PSG, the contact-free system showed similar values for average total sleep time (TST), % wake, % rapid eye movement, and % non-rapid eye movement sleep, with 96.1% and 93.3% accuracy of continuous measurement of HR and RR, respectively. We found a linear correlation between TST measured by the sensor and TST determined by PSG, with a coefficient of 0.98 (R = 0.87). Epoch-by-epoch comparison with PSG in the sleep laboratory setting revealed that the system showed sleep detection sensitivity, specificity, and accuracy of 92.5%, 80.4%, and 90.5%, respectively. TST estimates with the contact-free sleep monitoring system were closely correlated with the gold-standard reference. This system shows good sleep staging capability with improved performance over accelerometer-based apps, and collects additional physiological information on heart rate and respiratory rate. © 2017 American Academy of Sleep Medicine

  16. Models of Information Aggregation Pertaining to Combat Identification: A Review of the Literature (Modele du Regroupement de L’information Concernant L’identification au Combat: Une Analyse Documentaire)

    DTIC Science & Technology

    2007-04-01

    communication from the gunner who is able to offer enhanced visual information about the entity (e.g., insignia, type of weaponry) or radio contact may...1999 (Fuzzy Logic); Clemen & Winkler, in press (Bayes Theorem); Sentz & Ferson, 2002 (Dempster-Shafer)). Humansystems® Combat Identification...incidents when other units get lost and appear in unexpected locations. The formation radios for additional information from the operations officer

  17. Effect of contact lens use on Computer Vision Syndrome.

    PubMed

    Tauste, Ana; Ronda, Elena; Molina, María-José; Seguí, Mar

    2016-03-01

    To analyse the relationship between Computer Vision Syndrome (CVS) in computer workers and contact lens use, according to lens materials. Cross-sectional study. The study included 426 civil-service office workers, of whom 22% were contact lens wearers. Workers completed the Computer Vision Syndrome Questionnaire (CVS-Q) and provided information on their contact lenses and exposure to video display terminals (VDT) at work. CVS was defined as a CVS-Q score of 6 or more. The covariates were age and sex. Logistic regression was used to calculate the association (crude and adjusted for age and sex) between CVS and individual and work-related factors, and between CVS and contact lens type. Contact lens wearers are more likely to suffer CVS than non-lens wearers, with a prevalence of 65% vs 50%. Workers who wear contact lenses and are exposed to the computer for more than 6 h day(-1) are more likely to suffer CVS than non-lens wearers working at the computer for the same amount of time (aOR = 4.85; 95% CI, 1.25-18.80; p = 0.02). Regular contact lens use increases CVS after 6 h of computer work. © 2016 The Authors Ophthalmic & Physiological Optics © 2016 The College of Optometrists.

  18. Studies of the quenching phenomenon in delayed contact hypersensitivity reactions.

    PubMed

    Basketter, D A; Allenby, C F

    1991-09-01

    Studies in guinea pig and man have shown that eugenol can quench non-specifically contact urticarial responses, whereas limonene seems largely ineffective. In a comprehensive series of studies, there was little evidence of quenching of delayed contact hypersensitivity reactions to cinnamic aldehyde or citral, including in 'pre-quenched' material supplied by a perfume/flavour company, and in a similar mixture prepared in this laboratory, in the guinea pig model. In addition, there was no evidence of the quenching by eugenol of allergic reactions to cinnamic aldehyde in a panel of human subjects with a proven history of cinnamic-aldehyde-induced allergic contact dermatitis. Overall, the results lend little credibility to earlier literature reports of quenching phenomena in delayed contact hypersensitivity responses.

  19. Association of contact loading in diffuse axonal injuries from motor vehicle crashes.

    PubMed

    Yoganandan, Narayan; Gennarelli, Thomas A; Zhang, Jiangyue; Pintar, Frank A; Takhounts, Erik; Ridella, Stephen A

    2009-02-01

    Although studies have been conducted to analyze brain injuries from motor vehicle crashes, the association of head contact has not been fully established. This study examined the association in occupants sustaining diffuse axonal injuries (DAIs). The 1997 to 2006 motor vehicle Crash Injury Research Engineering Network database was used. All crash modes and all changes in velocity were included; ejections and rollovers were excluded; injuries to front and rear seat occupants with and without restraint use were considered. DAI were coded in the database using Abbreviated Injury Scale 1990. Loss of consciousness was included and head contact was based on medical- and crash-related data. Sixty-seven occupants with varying ages were coded with DAI. Forty-one adult occupants (mean, 33 years of age, 171-cm tall, 71-kg weight; 30 drivers, 11 passengers) were analyzed. Mean change in velocity was 41.2 km/h and Glasgow Coma Scale score was 4. There were 33 lateral, 6 frontal, and 2 rear crashes with 32 survivors and 9 were fatalities. Two occupants in the same crash did not sustain DAI. Although skull fractures and scalp injuries occurred in some impacts, head contact was identified in all frontal, rear, and far side, and all but one nearside crashes. Using a large sample size of occupants sustaining DAI in 1991 to 2006 model year vehicles, DAI occurred more frequently in side than frontal crashes, is most commonly associated with impact load transfer, and is not always accompanied by skull fractures. The association of head contact in >95% of cases underscores the importance of evaluating crash-related variables and medical information for trauma analysis. It would be prudent to include contact loading in addition to angular kinematics in the analysis and characterization of DAI.

  20. 30 CFR 250.418 - What additional information must I submit with my APD?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must I submit with my APD? You must include the following with the APD: (a) Rated capacities of the drilling rig...

  1. 30 CFR 250.418 - What additional information must I submit with my APD?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must I submit with my APD? You must include the following with the APD: (a) Rated capacities of the drilling rig...

  2. 30 CFR 250.418 - What additional information must I submit with my APD?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must I submit with my APD? You must include the following with the APD: (a) Rated capacities of the drilling rig...

  3. 21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... established in § 20.61 of this chapter. (6) All records showing the Food and Drug Administration's testing of... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Confidentiality of data and information in color additive petitions. 71.15 Section 71.15 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH...

  4. 21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... established in § 20.61 of this chapter. (6) All records showing the Food and Drug Administration's testing of... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Confidentiality of data and information in color additive petitions. 71.15 Section 71.15 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH...

  5. 21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... established in § 20.61 of this chapter. (6) All records showing the Food and Drug Administration's testing of... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Confidentiality of data and information in color additive petitions. 71.15 Section 71.15 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH...

  6. 21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... established in § 20.61 of this chapter. (6) All records showing the Food and Drug Administration's testing of... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Confidentiality of data and information in color additive petitions. 71.15 Section 71.15 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH...

  7. Sensing with Superconducting Point Contacts

    PubMed Central

    Nurbawono, Argo; Zhang, Chun

    2012-01-01

    Superconducting point contacts have been used for measuring magnetic polarizations, identifying magnetic impurities, electronic structures, and even the vibrational modes of small molecules. Due to intrinsically small energy scale in the subgap structures of the supercurrent determined by the size of the superconducting energy gap, superconductors provide ultrahigh sensitivities for high resolution spectroscopies. The so-called Andreev reflection process between normal metal and superconductor carries complex and rich information which can be utilized as powerful sensor when fully exploited. In this review, we would discuss recent experimental and theoretical developments in the supercurrent transport through superconducting point contacts and their relevance to sensing applications, and we would highlight their current issues and potentials. A true utilization of the method based on Andreev reflection analysis opens up possibilities for a new class of ultrasensitive sensors. PMID:22778630

  8. UVB-induced epidermal pigmentation in mice eyes with no contact lens wear and non-UVB blocking and UVB blocking contact lens wear.

    PubMed

    Hiramoto, Keiichi; Kobayashi, Hiromi; Yamate, Yurika; Ishii, Masamitsu; Sato, Takao; Inoue, Masayasu

    2013-02-01

    Irradiation by ultraviolet (UV) B is known to increase the number of Dopa-positive melanocytes in the skin. This study examines the effectiveness of a contact lens for the defense of UVB eye irradiation-induced pigmentation. A 2.5 kJ/m(2) dose of UVB radiation was delivered by a sunlamp to the eye of C57BL/6j male mice, and changes in the expression of Dopa-positive melanocytes in the epidermis and the plasma level of alpha-melanocyte-stimulating hormone (α-MSH) was analyzed. The degree of change in the Dopa-positive melanocytes expression was reduced by UVB blocking contact lens using mice given UVB irradiation to the eye. The plasma level of α-MSH increased in the C57BL/6j mice after irradiation to the eye, but there was no increase in the UVB blocking contact lens mice given UVB irradiation to the eye. Both the increase of the expression of Dopa-positive melanocytes and the plasma level of α-MSH were strongly suppressed by an alignment fitting UVB blocking contact lens and only a slightly suspended UVB blocking contact lens. In addition, these changes were successfully inhibited by a UVB blocking contact lens but not by a non-UVB blocking contact lens with a similar absorbance. These observations suggest that the UVB blocking contact lens inhibits the pigmentation of the epidermis in mice by suppressing of the α-MSH. Copyright © 2012 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  9. 41 CFR 102-79.111 - Where may Executive agencies find additional information on Integrated Workplace concepts?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Where may Executive agencies find additional information on Integrated Workplace concepts? 102-79.111 Section 102-79.111 Public... Integrated Workplace concepts? The GSA Office of Governmentwide Policy provides additional guidance in its...

  10. Measuring contact angle and meniscus shape with a reflected laser beam.

    PubMed

    Eibach, T F; Fell, D; Nguyen, H; Butt, H J; Auernhammer, G K

    2014-01-01

    Side-view imaging of the contact angle between an extended planar solid surface and a liquid is problematic. Even when aligning the view perfectly parallel to the contact line, focusing one point of the contact line is not possible. We describe a new measurement technique for determining contact angles with the reflection of a widened laser sheet on a moving contact line. We verified this new technique measuring the contact angle on a cylinder, rotating partially immersed in a liquid. A laser sheet is inclined under an angle φ to the unperturbed liquid surface and is reflected off the meniscus. Collected on a screen, the reflection image contains information to determine the contact angle. When dividing the laser sheet into an array of laser rays by placing a mesh into the beam path, the shape of the meniscus can be reconstructed from the reflection image. We verified the method by measuring the receding contact angle versus speed for aqueous cetyltrimethyl ammonium bromide solutions on a smooth hydrophobized as well as on a rough polystyrene surface.

  11. Measuring contact angle and meniscus shape with a reflected laser beam

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Eibach, T. F.; Nguyen, H.; Butt, H. J.

    2014-01-15

    Side-view imaging of the contact angle between an extended planar solid surface and a liquid is problematic. Even when aligning the view perfectly parallel to the contact line, focusing one point of the contact line is not possible. We describe a new measurement technique for determining contact angles with the reflection of a widened laser sheet on a moving contact line. We verified this new technique measuring the contact angle on a cylinder, rotating partially immersed in a liquid. A laser sheet is inclined under an angle φ to the unperturbed liquid surface and is reflected off the meniscus. Collectedmore » on a screen, the reflection image contains information to determine the contact angle. When dividing the laser sheet into an array of laser rays by placing a mesh into the beam path, the shape of the meniscus can be reconstructed from the reflection image. We verified the method by measuring the receding contact angle versus speed for aqueous cetyltrimethyl ammonium bromide solutions on a smooth hydrophobized as well as on a rough polystyrene surface.« less

  12. Contact allergy to preservatives in patients with occupational contact dermatitis and exposure analysis of preservatives in registered chemical products for occupational use.

    PubMed

    Schwensen, Jakob Ferløv; Friis, Ulrik Fischer; Menné, Torkil; Flyvholm, Mari-Ann; Johansen, Jeanne Duus

    2017-05-01

    The aim of the study is to investigate risk factors for sensitization to preservatives and to examine to which extent different preservatives are registered in chemical products for occupational use in Denmark. A retrospective epidemiological observational analysis of data from a university hospital was conducted. All patients had occupational contact dermatitis and were consecutively patch tested with 11 preservatives from the European baseline series and extended patch test series during a 5-year period: 2009-2013. Information regarding the same preservatives in chemical products for occupational use ('substances and materials') registered in the Danish Product Register Database (PROBAS) was obtained. The frequency of preservative contact allergy was 14.2% (n = 141) in 995 patients with occupational contact dermatitis. Patients with preservative contact allergy had significantly more frequently facial dermatitis (19.9 versus 13.1%) and age > 40 years (71.6 versus 45.8%) than patients without preservative contact allergy, whereas atopic dermatitis was less frequently observed (12.1 versus 19.8%). Preservative contact allergy was more frequent in painters with occupational contact dermatitis as compared to non-painters with occupational contact dermatitis (p < 0.001). This was mainly caused by contact allergy to methylisothiazolinone and contact allergy to formaldehyde. Analysis of the registered substances and materials in PROBAS revealed that preservatives occurred in several product categories, e.g., 'paints and varnishes', 'cleaning agents', 'cooling agents', and 'polishing agents'. Formaldehyde and isothiazolinones were extensively registered in PROBAS. The extensive use of formaldehyde and isothiazolinones in chemical products for occupational use may be problematic for the worker. Appropriate legislation, substitution, and employee education should be prioritized.

  13. User's manual for tooth contact analysis of face-milled spiral bevel gears with given machine-tool settings

    NASA Technical Reports Server (NTRS)

    Litvin, Faydor L.; Zhang, YI; Chen, Jui-Sheng

    1991-01-01

    Research was performed to develop a computer program that will: (1) simulate the meshing and bearing contact for face milled spiral beval gears with given machine tool settings; and (2) to obtain the output, some of the data is required for hydrodynamic analysis. It is assumed that the machine tool settings and the blank data will be taken from the Gleason summaries. The theoretical aspects of the program are based on 'Local Synthesis and Tooth Contact Analysis of Face Mill Milled Spiral Bevel Gears'. The difference between the computer programs developed herein and the other one is as follows: (1) the mean contact point of tooth surfaces for gears with given machine tool settings must be determined iteratively, while parameters (H and V) are changed (H represents displacement along the pinion axis, V represents the gear displacement that is perpendicular to the plane drawn through the axes of the pinion and the gear of their initial positions), this means that when V differs from zero, the axis of the pionion and the gear are crossed but not intersected; (2) in addition to the regular output data (transmission errors and bearing contact), the new computer program provides information about the contacting force for each contact point and the sliding and the so-called rolling velocity. The following topics are covered: (1) instructions for the users as to how to insert the input data; (2) explanations regarding the output data; (3) numerical example; and (4) listing of the program.

  14. 78 FR 41915 - Procurement List Proposed Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-12

    ..., Arlington, Virginia, 22202-4149. FOR FURTHER INFORMATION OR TO SUBMIT COMMENTS CONTACT: Barry S. Lineback... INFORMATION: This notice is published pursuant to 41 U.S.C. 8503 (a)(2) and 41 CFR 51-2.3. Its purpose is to...., Brooklyn, NY. Contracting Activity: Military Resale-Defense Commissary Agency (DeCA), Fort Lee, VA...

  15. Status of wraparound contact solar cells and arrays

    NASA Technical Reports Server (NTRS)

    Baraona, C. R.; Young, L. E.

    1978-01-01

    Solar cells with wraparound contacts provide the following advantages in array assembly: (1) eliminate the need for discretely formed, damage susceptible series tabs; (2) eliminate the n gap problem by allowing the use of uniform covers over the entire cell surface; (3) allow a higher packing factor by reducing the additional series spacing formly required for forming, and routing the series tab; and (4) allow the cell bonding to the interconnect system to be a single-side function wherein series contacts can be made at the same time parallel contracts are made.

  16. Efficiency of nonstandard and high contact ratio involute spur gears

    NASA Technical Reports Server (NTRS)

    Anderson, N. E.; Loewenthal, S. H.

    1984-01-01

    A power loss prediction was extended to include involute spur gears of nonstandard proportions. The method is used to analyze the effects of modified addendum, tooth thickness, and gear center distance in addition to the parameters previously considered which included gear diameter, pitch, pressure angle, face width, oil viscosity, speed, and torque. Particular emphasis was placed on high contact ratio gearing (contact ratios greater than two). Despite their higher sliding velocities, high contact ratio gears are designed to levels of efficiency comparable to those of conventional gears while retaining their advantages through proper selection of gear geometry.

  17. Efficiency of nonstandard and high contact ratio involute spur gears

    NASA Technical Reports Server (NTRS)

    Anderson, N. E.; Loewenthal, S. H.

    1986-01-01

    A power loss prediction was extended to include involute spur gears of nonstandard proportions. The method is used to analyze the effects of modified addendum, tooth thickness, and gear center distance in addition to the parameters previously considered which included gear diameter, pitch, pressure angle, face width, oil viscosity, speed, and torque. Particular emphasis was placed on high contact ratio gearing (contact ratios greater than two). Despite their higher sliding velocities, high contact ratio gears are designed to levels of efficiency comparable to those of conventional gears while retaining their advantages through proper selection of gear geometry.

  18. Types of Contact Lenses

    MedlinePlus

    ... Consumer Devices Consumer Products Contact Lenses Types of Contact Lenses Share Tweet Linkedin Pin it More sharing ... Orthokeratology (Ortho-K) Decorative (Plano) Contact Lenses Soft Contact Lenses Soft contact lenses are made of soft, ...

  19. Contact geometry and mechanics predict friction forces during tactile surface exploration.

    PubMed

    Janko, Marco; Wiertlewski, Michael; Visell, Yon

    2018-03-20

    When we touch an object, complex frictional forces are produced, aiding us in perceiving surface features that help to identify the object at hand, and also facilitating grasping and manipulation. However, even during controlled tactile exploration, sliding friction forces fluctuate greatly, and it is unclear how they relate to the surface topography or mechanics of contact with the finger. We investigated the sliding contact between the finger and different relief surfaces, using high-speed video and force measurements. Informed by these experiments, we developed a friction force model that accounts for surface shape and contact mechanical effects, and is able to predict sliding friction forces for different surfaces and exploration speeds. We also observed that local regions of disconnection between the finger and surface develop near high relief features, due to the stiffness of the finger tissues. Every tested surface had regions that were never contacted by the finger; we refer to these as "tactile blind spots". The results elucidate friction force production during tactile exploration, may aid efforts to connect sensory and motor function of the hand to properties of touched objects, and provide crucial knowledge to inform the rendering of realistic experiences of touch contact in virtual reality.

  20. Blood contact properties of ascorbyl chitosan.

    PubMed

    Yalinca, Z; Yilmaz, E; Taneri, B; Bullici, F; Tuzmen, S

    2013-01-01

    Ascorbyl chitosan was synthesized by heating chitosan with ascorbic acid in isopropanol. The products were characterized by FTIR and C-13 NMR spectroscopies, SEM, and elemental analysis. Blood contact properties of ascorbyl chitosans were evaluated. The ascorbyl chitosans demonstrated to have increased lipid-lowering activity in comparison to chitosan alone upon contact with human blood serum in in vitro conditions. Furthermore, the total cholesterol/HDL ratio was improved towards the desirable ideal values after three hours contact with ascorbyl chitosan samples. The lipid-lowering activity increased with ascorbyl substitution. The inherent nonspecific adsorption capability of chitosan due to its chelating power with several different functional groups was exhibited by ascorbyl chitosans as well. This behavior was exemplified in a simultaneous decrease in the total iron values of the volunteers together with lower lipid levels. Furthermore, ascorbyl chitosans were observed to have less hemocompatibility but increased anticoagulant activity when compared to chitosan alone. Additional in vivo studies are necessary to support these results and to investigate further the advantages and disadvantages of these materials to prove their safety prior to clinical applications.

  1. Experimental investigation on the electrical contact behavior of rolling contact connector.

    PubMed

    Chen, Junxing; Yang, Fei; Luo, Kaiyu; Zhu, Mingliang; Wu, Yi; Rong, Mingzhe

    2015-12-01

    Rolling contact connector (RCC) is a new technology utilized in high performance electric power transfer systems with one or more rotating interfaces, such as radars, satellites, wind generators, and medical computed tomography machines. Rolling contact components are used in the RCC instead of traditional sliding contacts to transfer electrical power and/or signal. Since the requirement of the power transmission is increasing in these years, the rolling electrical contact characteristics become more and more important for the long-life design of RCC. In this paper, a typical form of RCC is presented. A series of experimental work are carried out to investigate the rolling electrical contact characteristics during its lifetime. The influence of a variety of factors on the electrical contact degradation behavior of RCC is analyzed under both vacuum and air environment. Based on the surface morphology and elemental composition changes in the contact zone, which are assessed by field emission scanning electron microscope and confocal laser scanning microscope, the mechanism of rolling electrical contact degradation is discussed.

  2. Atopic and Contact Dermatitis of the Vulva.

    PubMed

    Pichardo-Geisinger, Rita

    2017-09-01

    Pruritus, or itch, is a common vulvar complaint that is often treated empirically as a yeast infection; however, yeast infections are just one of the many conditions that can cause vulvar itch. Ignoring other conditions can prolong pruritus unnecessarily. Atopic dermatitis, irritant contact dermatitis, and allergic contact dermatitis are extremely common noninfectious causes of vulvar itch that are often underdiagnosed by nondermatologists. Identifying these conditions and treating them appropriately can significantly improve a patient's quality of life and appropriately decrease health care expenditures by preventing unnecessary additional referrals or follow-up visits and decreasing pharmaceutical costs. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. Knowledge, usage and barriers associated with contact lens wear in Ghana.

    PubMed

    Abokyi, Samuel; Manuh, George; Otchere, Heinz; Ilechie, Alex

    2017-10-01

    Despite findings that contact lens wear for vision correction provides better quality of life than spectacles, contact lens use in developing countries is low. This study evaluated knowledge, usage and barriers associated with contact lens wear among spectacle wearers in Cape Coast, Ghana. A cross-sectional survey using a structured questionnaire was conducted on an adult population of spectacle wearers to assess their knowledge of contact lens wear for vision correction. The participants were proportionately sampled from three eye clinics in the Cape Coast Metropolis, Ghana. Questionnaires were either self-administered or completed with the help of a research assistant. Of the 422 participants, only 147 (34.8%) knew of contact lens wear for vision correction. The proportion of spectacle wearers reporting history of contact lens wear was 14 (3.3%). Barriers to contact lens wear reported were satisfaction with vision through spectacles 102 (25.0%), lack of adequate information 111 (27.2%), fear of side effects 94 (23.0%) and cost 78 (19.1%). The younger adults and those with higher number of changes of spectacles were more likely to know of contact lenses. Knowledge and usage of contact lenses among spectacle wearers was low. Contact lens education and demonstration of visual performance through fitting of trial contact lenses on potential candidates may help overcome barriers to contact lens wear. Published by Elsevier Ltd.

  4. Public Awareness of and Contact With Physicians Who Receive Industry Payments: A National Survey.

    PubMed

    Pham-Kanter, Genevieve; Mello, Michelle M; Lehmann, Lisa Soleymani; Campbell, Eric G; Carpenter, Daniel

    2017-07-01

    The Physician Payments Sunshine Act, part of the Affordable Care Act, requires pharmaceutical and medical device firms to report payments they make to physicians and, through its Open Payments program, makes this information publicly available. To establish estimates of the exposure of the American patient population to physicians who accept industry payments, to compare these population-based estimates to physician-based estimates of industry contact, and to investigate Americans' awareness of industry payments. Cross-sectional survey conducted in late September and early October 2014, with data linkage of respondents' physicians to Open Payments data. A total of 3542 adults drawn from a large, nationally representative household panel. Respondents' contact with physicians reported in Open Payments to have received industry payments; respondents' awareness that physicians receive payments from industry and that payment information is publicly available; respondents' knowledge of whether their own physician received industry payments. Among the 1987 respondents who could be matched to a specific physician, 65% saw a physician who had received an industry payment during the previous 12 months. This population-based estimate of exposure to industry contact is much higher than physician-based estimates from the same period, which indicate that 41% of physicians received an industry payment. Across the six most frequently visited specialties, patient contact with physicians who had received an industry payment ranged from 60 to 85%; the percentage of physicians with industry contact in these specialties was much lower (35-56%). Only 12% of survey respondents knew that payment information was publicly available, and only 5% knew whether their own doctor had received payments. Patients' contact with physicians who receive industry payments is more prevalent than physician-based measures of industry contact would suggest. Very few Americans know whether their own doctor

  5. Getting the most out of additional guidance information in deformable image registration by leveraging multi-objective optimization

    NASA Astrophysics Data System (ADS)

    Alderliesten, Tanja; Bosman, Peter A. N.; Bel, Arjan

    2015-03-01

    Incorporating additional guidance information, e.g., landmark/contour correspondence, in deformable image registration is often desirable and is typically done by adding constraints or cost terms to the optimization function. Commonly, deciding between a "hard" constraint and a "soft" additional cost term as well as the weighting of cost terms in the optimization function is done on a trial-and-error basis. The aim of this study is to investigate the advantages of exploiting guidance information by taking a multi-objective optimization perspective. Hereto, next to objectives related to match quality and amount of deformation, we define a third objective related to guidance information. Multi-objective optimization eliminates the need to a-priori tune a weighting of objectives in a single optimization function or the strict requirement of fulfilling hard guidance constraints. Instead, Pareto-efficient trade-offs between all objectives are found, effectively making the introduction of guidance information straightforward, independent of its type or scale. Further, since complete Pareto fronts also contain less interesting parts (i.e., solutions with near-zero deformation effort), we study how adaptive steering mechanisms can be incorporated to automatically focus more on solutions of interest. We performed experiments on artificial and real clinical data with large differences, including disappearing structures. Results show the substantial benefit of using additional guidance information. Moreover, compared to the 2-objective case, additional computational cost is negligible. Finally, with the same computational budget, use of the adaptive steering mechanism provides superior solutions in the area of interest.

  6. Occupational contact dermatitis in blue-collar workers: results from a multicentre study from the Danish Contact Dermatitis Group (2003-2012).

    PubMed

    Schwensen, Jakob F; Menné, Torkil; Veien, Niels K; Funding, Anne T; Avnstorp, Christian; Østerballe, Morten; Andersen, Klaus E; Paulsen, Evy; Mørtz, Charlotte G; Sommerlund, Mette; Danielsen, Anne; Andersen, Bo L; Thormann, Jens; Kristensen, Ove; Kristensen, Berit; Vissing, Susanne; Nielsen, Niels H; Thyssen, Jacob P; Johansen, Jeanne D

    2014-12-01

    Blue-collar workers have a high risk of occupational contact dermatitis, but epidemiological studies are scarce. To investigate allergic contact dermatitis in blue-collar workers with dermatitis registered by the Danish Contact Dermatitis Group. A retrospective analysis of patch test data from 1471 blue-collar workers and 1471 matched controls tested between 2003 and 2012 was performed. A logistic regression was used to test for associations. The blue-collar workers often had occupational hand dermatitis (p < 0.001). Atopic dermatitis was less commonly observed among blue-collar workers (19.6%) than among controls (23.9%) (p = 0.005). Allergens with a statistically significant association with the occupational group of blue-collar workers were epoxy resins, methyldibromo glutaronitrile, 2-bromo-2-nitro-1,3-propanediol, potassium dichromate, and methylchloroisothiazolinone (MCI)/methylisothiazolinone (MI). The following occupations were additionally identified as risk factors for contact sensitization to MCI/MI and MI, epoxy resins, and potassium dichromate, respectively: painting, construction work, and tile setting/terrazzo work. Contact allergy is a major problem among blue-collar workers. The data indicate a healthy worker effect among blue-collar workers diagnosed with dermatitis, as blue-collar workers were diagnosed significantly less often with atopic dermatitis than were controls. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  7. Predicting protein β-sheet contacts using a maximum entropy-based correlated mutation measure.

    PubMed

    Burkoff, Nikolas S; Várnai, Csilla; Wild, David L

    2013-03-01

    The problem of ab initio protein folding is one of the most difficult in modern computational biology. The prediction of residue contacts within a protein provides a more tractable immediate step. Recently introduced maximum entropy-based correlated mutation measures (CMMs), such as direct information, have been successful in predicting residue contacts. However, most correlated mutation studies focus on proteins that have large good-quality multiple sequence alignments (MSA) because the power of correlated mutation analysis falls as the size of the MSA decreases. However, even with small autogenerated MSAs, maximum entropy-based CMMs contain information. To make use of this information, in this article, we focus not on general residue contacts but contacts between residues in β-sheets. The strong constraints and prior knowledge associated with β-contacts are ideally suited for prediction using a method that incorporates an often noisy CMM. Using contrastive divergence, a statistical machine learning technique, we have calculated a maximum entropy-based CMM. We have integrated this measure with a new probabilistic model for β-contact prediction, which is used to predict both residue- and strand-level contacts. Using our model on a standard non-redundant dataset, we significantly outperform a 2D recurrent neural network architecture, achieving a 5% improvement in true positives at the 5% false-positive rate at the residue level. At the strand level, our approach is competitive with the state-of-the-art single methods achieving precision of 61.0% and recall of 55.4%, while not requiring residue solvent accessibility as an input. http://www2.warwick.ac.uk/fac/sci/systemsbiology/research/software/

  8. Robust classification of contact orientation between tissue and an integrated spectroscopy and radiofrequency ablation catheter

    NASA Astrophysics Data System (ADS)

    Zaryab, Mohammad; Singh-Moon, Rajinder P.; Hendon, Christine P.

    2017-02-01

    Using light-based catheters for radiofrequency ablation (RFA) therapies grants the ability to accurately derive tissue properties such as lesion depth and overtreatment from spectroscopic information. However, this information is heavily reliant on contact quality with the treatment area and the orientation of the catheter. Thus to improve assessments of tissue properties, this work utilizes Bayesian modelling to classify whether the catheter is indeed in proper contact with the tissue. Initially in-laboratory experiments were conducted with ten fresh swine hearts submerged in blood. A total of 1555 unique near infrared spectra were collected from a spectrometer using a light-based catheter and manually tagged as "full perpendicular contact," "angled contact," and "no contact," between the catheter and heart tissue. Three features were prominent in all spectra for distinguishing purposes: area underneath the spectra, an intensity "valley" between 730 nm and 800 nm, along with the slope between 850 nm and 1150 nm. A classifier featuring bootstrapping, adaboost, and k-means techniques was thus created and achieved a 96.05% accuracy in classifying full contact, 98.33% accuracy in classifying angled contact, and 100% accuracy in classifying no contact.

  9. A 3D contact analysis approach for the visualization of the electrical contact asperities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Roussos, Constantinos C.; Swingler, Jonathan

    The electrical contact is an important phenomenon that should be given into consideration to achieve better performance and long term reliability for the design of devices. Based upon this importance, the electrical contact interface has been visualized as a “3D Contact Map” and used in order to investigate the contact asperities. The contact asperities describe the structures above and below the contact spots (the contact spots define the 3D contact map) to the two conductors which make the contact system. The contact asperities require the discretization of the 3D microstructures of the contact system into voxels. A contact analysis approachmore » has been developed and introduced in this paper which shows the way to the 3D visualization of the contact asperities of a given contact system. For the discretization of 3D microstructure of contact system into voxels, X-ray Computed Tomography (CT) method is used in order to collect the data of a 250 V, 16 A rated AC single pole rocker switch which is used as a contact system for investigation.« less

  10. A 3D contact analysis approach for the visualization of the electrical contact asperities

    PubMed Central

    Swingler, Jonathan

    2017-01-01

    The electrical contact is an important phenomenon that should be given into consideration to achieve better performance and long term reliability for the design of devices. Based upon this importance, the electrical contact interface has been visualized as a ‘‘3D Contact Map’’ and used in order to investigate the contact asperities. The contact asperities describe the structures above and below the contact spots (the contact spots define the 3D contact map) to the two conductors which make the contact system. The contact asperities require the discretization of the 3D microstructures of the contact system into voxels. A contact analysis approach has been developed and introduced in this paper which shows the way to the 3D visualization of the contact asperities of a given contact system. For the discretization of 3D microstructure of contact system into voxels, X-ray Computed Tomography (CT) method is used in order to collect the data of a 250 V, 16 A rated AC single pole rocker switch which is used as a contact system for investigation. PMID:28105383

  11. A 3D contact analysis approach for the visualization of the electrical contact asperities

    DOE PAGES

    Roussos, Constantinos C.; Swingler, Jonathan

    2017-01-11

    The electrical contact is an important phenomenon that should be given into consideration to achieve better performance and long term reliability for the design of devices. Based upon this importance, the electrical contact interface has been visualized as a “3D Contact Map” and used in order to investigate the contact asperities. The contact asperities describe the structures above and below the contact spots (the contact spots define the 3D contact map) to the two conductors which make the contact system. The contact asperities require the discretization of the 3D microstructures of the contact system into voxels. A contact analysis approachmore » has been developed and introduced in this paper which shows the way to the 3D visualization of the contact asperities of a given contact system. For the discretization of 3D microstructure of contact system into voxels, X-ray Computed Tomography (CT) method is used in order to collect the data of a 250 V, 16 A rated AC single pole rocker switch which is used as a contact system for investigation.« less

  12. Multi-Material Front Contact for 19% Thin Film Solar Cells.

    PubMed

    van Deelen, Joop; Tezsevin, Yasemin; Barink, Marco

    2016-02-06

    The trade-off between transmittance and conductivity of the front contact material poses a bottleneck for thin film solar panels. Normally, the front contact material is a metal oxide and the optimal cell configuration and panel efficiency were determined for various band gap materials, representing Cu(In,Ga)Se₂ (CIGS), CdTe and high band gap perovskites. Supplementing the metal oxide with a metallic copper grid improves the performance of the front contact and aims to increase the efficiency. Various front contact designs with and without a metallic finger grid were calculated with a variation of the transparent conductive oxide (TCO) sheet resistance, scribing area, cell length, and finger dimensions. In addition, the contact resistance and illumination power were also assessed and the optimal thin film solar panel design was determined. Adding a metallic finger grid on a TCO gives a higher solar cell efficiency and this also enables longer cell lengths. However, contact resistance between the metal and the TCO material can reduce the efficiency benefit somewhat.

  13. Contact Lens Risks

    MedlinePlus

    ... Health and Consumer Devices Consumer Products Contact Lenses Contact Lens Risks Share Tweet Linkedin Pin it More ... redness blurred vision swelling pain Serious Hazards of Contact Lenses Symptoms of eye irritation can indicate a ...

  14. Clinical Trials Information for Patients and Caregivers

    MedlinePlus

    ... to Ask about Your Treatment Research Clinical Trials Information for Patients and Caregivers Clinical trials are research ... Twitter Instagram YouTube Google+ LinkedIn GovDelivery RSS CONTACT INFORMATION Contact Us LiveHelp Online Chat MORE INFORMATION About ...

  15. General Information about Adult Primary Liver Cancer

    MedlinePlus

    ... the PDQ Adult Treatment Editorial Board . Clinical Trial Information A clinical trial is a study to answer ... Twitter Instagram YouTube Google+ LinkedIn GovDelivery RSS CONTACT INFORMATION Contact Us LiveHelp Online Chat MORE INFORMATION About ...

  16. Information resources in the USA on new and renewable energy, a description and directory

    NASA Astrophysics Data System (ADS)

    1981-06-01

    The production dissemination, and availability of US scientific and technical information about new and renewable energy resources, the policy framework within which the technologies are developed, and the roles of public and private sectors are reported. A directory of sources of additional information, printed material, computerized data bases, institutional services, personal contacts, about the use of new and renewable energy is included.

  17. Customer loyalty among daily disposable contact lens wearers.

    PubMed

    Patel, Neelam I; Naroo, Shehzad A; Eperjesi, Frank; Rumney, Nicholas J

    2015-02-01

    Optometric practices offer contact lenses as cash sale items or as part of monthly payment plans. With the contact lens market becoming increasingly competitive, patients are opting to purchase lenses from supermarkets and Internet suppliers. Monthly payment plans are often implemented to improve loyalty. This study aimed to compare behavioural loyalty between monthly payment plan members and non-members. BBR Optometry Ltd offers a monthly payment plan (Eyelife™) to their contact lens wearers. A retrospective audit of 38 Eyelife™ members (mean±SD: 42.7±15.0 years) and 30 non-members (mean±SD: 40.8±16.7 years) was conducted. Revenue and profits generated, service uptake and product sales between the two groups were compared over a fixed period of 18 months. Eyelife™ members generated significantly higher professional fee revenue (P<0.001), £153.96 compared to £83.50, and profits (P<0.001). Eyelife™ members had a higher uptake of eye examinations (P<0.001). The 2 groups demonstrated no significant difference in spectacle sales by volume (P=0.790) or value (P=0.369). There were also no significant differences in contact lens revenue (P=0.337), although Eyelife™ members did receive a discount. The Eyelife™ group incurred higher contact lens costs (P=0.037), due to a greater volume of contact lens purchases, 986 units compared to 582. Monthly payment plans improve loyalty among contact lens wearers, particularly service uptake and volume of lens purchases. Additionally the greater professional fees generated, render monthly payment plans an attractive business model and practice builder. Copyright © 2014 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  18. Friction and universal contact area law for randomly rough viscoelastic contacts.

    PubMed

    Scaraggi, M; Persson, B N J

    2015-03-18

    We present accurate numerical results for the friction force and the contact area for a viscoelastic solid (rubber) in sliding contact with hard, randomly rough substrates. The rough surfaces are self-affine fractal with roughness over several decades in length scales. We calculate the contribution to the friction from the pulsating deformations induced by the substrate asperities. We also calculate how the area of real contact, A(v, p), depends on the sliding speed v and on the nominal contact pressure p, and we show how the contact area for any sliding speed can be obtained from a universal master curve A(p). The numerical results are found to be in good agreement with the predictions of an analytical contact mechanics theory.

  19. Contact Lens Care

    MedlinePlus

    ... your prescription expires Lens measurements The contact lens brand name and material Your doctor’s name and contact ... mail-order sellers may send you a different brand. Contact lenses may look the same, but materials ...

  20. How to retrieve additional information from the multiplicity distributions

    NASA Astrophysics Data System (ADS)

    Wilk, Grzegorz; Włodarczyk, Zbigniew

    2017-01-01

    Multiplicity distributions (MDs) P(N) measured in multiparticle production processes are most frequently described by the negative binomial distribution (NBD). However, with increasing collision energy some systematic discrepancies have become more and more apparent. They are usually attributed to the possible multi-source structure of the production process and described using a multi-NBD form of the MD. We investigate the possibility of keeping a single NBD but with its parameters depending on the multiplicity N. This is done by modifying the widely known clan model of particle production leading to the NBD form of P(N). This is then confronted with the approach based on the so-called cascade-stochastic formalism which is based on different types of recurrence relations defining P(N). We demonstrate that a combination of both approaches allows the retrieval of additional valuable information from the MDs, namely the oscillatory behavior of the counting statistics apparently visible in the high energy data.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.