Public-private provision of protection measures against natural hazards

NASA Astrophysics Data System (ADS)

Gruber, M.

2009-04-01

Natural hazards threaten human lives as well as economic values of a society. Due to an increasing population density, augmenting property holdings in congested areas as well as higher frequencies of catastrophic events, the damage potential associated with natural hazards is growing. In order to safeguard societal assets against this threat, active and passive protection measures can be established. While passive protection measures provide for this type of risk by means of thorough land use planning, active protection measures aim at improving safety through technical or biological protective systems and structures. However, these provisions are costly and need to be handled prudentially. In most European countries protection measures against natural hazards are provided by the public. Specific governmental funds have been set up for the establishment of preventive systems as well as for damage compensation payments after the occurrence of catastrophic events. Though, additional capital is urgently needed in order to facilitate the realisation of all necessary projects in this field and to provide for maximal safety. One potential solution for such financial deficiencies can be found in Public Private Partnerships (PPP). PPPs have been implemented as attractive concepts for the funding of diverse projects in the fields of e.g. road construction, municipal, health and social services. In principle, they could also provide alternative funding solutions for the establishment of crucial protective infrastructure in respect of natural hazards, adding private financial means to the currently available public funds. Thereby, the entire capacities for catastrophe funding could be enhanced. Beside PPPs, also alternative funding mechanisms such as the emission of catastrophe bonds, contingent credit lines or leasing arrangements may enhance available capacities for the financing of protection measures. This contribution discusses innovative solutions for the funding of

Protective agents used as additives in University of Wisconsin solution to promote protection against ischaemia-reperfusion injury in rat lung.

PubMed

Chiang, C H; Wu, K; Yu, C P; Perng, W C; Yan, H C; Wu, C P; Chang, D M; Hsu, K

1998-09-01

1. An intervention to reduce ischaemia-reperfusion lung injury will be an important advance in transplant medicine. Although the mechanisms associated with producing ischaemia-reperfusion endothelial injury have not been completely elucidated, many of the injury mediators have been studied in detail. While no single pharmacological therapy is likely to be totally effective in eliminating this complex injury, we have developed a mixture of agents that are known to block pathways involved in producing ischaemia-reperfusion-associated lung vascular injury.2. The present study modified University of Wisconsin solution (UW) by adding one of the protective agents prostaglandin E1 (PGE1), dexamethasone (Dex) or dibutyryl cAMP (Bt2-cAMP), or a combination of these, to the perfusate of rat lungs exposed to 4 h of cold ischaemia followed by 1 h of reperfusion. Nine modified UW solutions were studied: (1) UW+Dex, (2) UW+PGE1, (3) UW+Bt2-cAMP, (4) UW+Dexx3, (5) UW+PGE1x3, (6) UW+Bt2-cAMPx3, (7) UW+Dex+PGE1, (8) UW+Dex+Bt2-cAMP, (9) UW+PGE1+Bt2-cAMP. These solutions were utilized in individual experiments to assess haemodynamic changes, lung weight gain, the capillary filtration coefficient (Kfc) and pathology in all lungs.3. The results indicate that lung weight gain and Kfc values were significantly lower than with UW alone in groups 1, 2 and 3, which contained only one additional protective agent. In groups 4, 5 and 6, which contain three times the concentration of each protective agent, both Kfc and lung weight gain were similar to those measured in groups 1, 2 and 3, i.e. lungs were protected but the protection was not dose dependent. In groups 7, 8 and 9, which contained two protective agents, lung weight gain and Kfc were greatly reduced compared with UW alone. Histopathological studies showed similar decreases in the injury profiles of lungs.4. Although UW contains several antioxidant protective agents such as allopurinol and glutathione, it did not provide effective

Constructing vulnerabilty and protective measures indices for the enhanced critical infrastructure protection program.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisher, R. E.; Buehring, W. A.; Whitfield, R. G.

2009-10-14

framework incorporates consequence, threat, and vulnerability components and addresses all hazards. The analysis of the vulnerability data needs to be reproducible, support risk analysis, and go beyond protection. It also needs to address important security/vulnerability topics, such as physical security, cyber security, systems analysis, and dependencies and interdependencies. This report provides an overview of the approach being developed to estimate vulnerability and provide vulnerability comparisons for sectors and subsectors. the information will be used to assist DHS in analyzing existing protective measures and vulnerability at facilities, to identify potential ways to reduce vulnerabilities, and to assist in preparing sector risk estimates. The owner/operator receives an analysis of the data collected for a specific asset, showing a comparison between the facility's protection posture/vulnerability index and those of DHS sector/subsector sites visited. This comparison gives the owner/operator an indication of the asset's security strengths and weaknesses that may be contributing factors to its vulnerability and protection posture. The information provided to the owner/operator shows how the asset compares to other similar assets within the asset's sector or subsector. A 'dashboard' display is used to illustrate the results in a convenient format. The dashboard allows the owner/operator to analyze the implementation of additional protective measures and to illustrate how such actions would impact the asset's Protective Measures Index (PMI) or Vulnerability Index (VI).« less

40 CFR 26.304 - Additional protections for pregnant women and fetuses involved in observational research.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Protections for Pregnant Women and Fetuses Involved as Subjects in Observational Research Conducted or Supported by EPA § 26.304 Additional protections for pregnant women and fetuses involved in observational... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Additional protections for pregnant...

40 CFR 26.304 - Additional protections for pregnant women and fetuses involved in observational research.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Protections for Pregnant Women and Fetuses Involved as Subjects in Observational Research Conducted or Supported by EPA § 26.304 Additional protections for pregnant women and fetuses involved in observational... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Additional protections for pregnant...

40 CFR 26.304 - Additional protections for pregnant women and fetuses involved in observational research.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Protections for Pregnant Women and Fetuses Involved as Subjects in Observational Research Conducted or Supported by EPA § 26.304 Additional protections for pregnant women and fetuses involved in observational... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Additional protections for pregnant...

40 CFR 26.304 - Additional protections for pregnant women and fetuses involved in observational research.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Protections for Pregnant Women and Fetuses Involved as Subjects in Observational Research Conducted or Supported by EPA § 26.304 Additional protections for pregnant women and fetuses involved in observational... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Additional protections for pregnant...

40 CFR 26.304 - Additional protections for pregnant women and fetuses involved in observational research.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protections for Pregnant Women and Fetuses Involved as Subjects in Observational Research Conducted or Supported by EPA § 26.304 Additional protections for pregnant women and fetuses involved in observational... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Additional protections for pregnant...

46 CFR 34.17-25 - Additional protection required-T/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Fixed Foam Extinguishing Systems, Details § 34.17-25 Additional protection required—T/ALL. (a) In order that any residual fires above the floor plates may be extinguished when a foam system is installed for...

46 CFR 34.17-25 - Additional protection required-T/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Fixed Foam Extinguishing Systems, Details § 34.17-25 Additional protection required—T/ALL. (a) In order that any residual fires above the floor plates may be extinguished when a foam system is installed for...

46 CFR 111.105-15 - Additional methods of protection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Additional methods of protection. 111.105-15 Section 111.105-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING... (incorporated by reference; see 46 CFR 110.10-1) or Article 500.7(I) of NFPA NEC 2002 (incorporated by reference...

Earthquake Protection Measures for People with Disabilities

NASA Astrophysics Data System (ADS)

Gountromichou, C.; Kourou, A.; Kerpelis, P.

2009-04-01

The problem of seismic safety for people with disabilities not only exists but is also urgent and of primary importance. Working towards disability equality, Earthquake Planning and Protection Organization of Greece (E.P.P.O.) has developed an educational scheme for people with disabilities in order to guide them to develop skills to protect themselves as well as to take the appropriate safety measures before, during and after an earthquake. The framework of this initiative includes a number of actions have been already undertaken, including the following: a. Recently, the main guidelines have been published to help people who have physical, cognitive, visual, or auditory disabilities to cope with a destructive earthquake. Of great importance, in case of people with disabilities, is to be prepared for the disaster, with several measures that must be taken starting today. In the pre-earthquake period, it is important that these people, in addition to other measures, do the following: - Create a Personal Support Network The Personal Support Network should be a group of at least three trustful people that can assist the disabled person to prepare for a disastrous event and to recover after it. - Complete a Personal Assessment The environment may change after a destructive earthquake. People with disabilities are encouraged to make a list of their personal needs and their resources for meeting them in a disaster environment. b. Lectures and training seminars on earthquake protection are given for students, teachers and educators in Special Schools for disabled people, mainly for informing and familiarizing them with earthquakes and with safety measures. c. Many earthquake drills have already taken place, for each disability, in order to share good practices and lessons learned to further disaster reduction and to identify gaps and challenges. The final aim of this action is all people with disabilities to be well informed and motivated towards a culture of earthquake

29 CFR 1918.105 - Other protective measures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Personal Protective Equipment § 1918.105 Other...) When necessary, protective clothing shall be cleaned and disinfected before reissuance. (b) Personal... 29 Labor 7 2011-07-01 2011-07-01 false Other protective measures. 1918.105 Section 1918.105 Labor...

29 CFR 1918.105 - Other protective measures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Personal Protective Equipment § 1918.105 Other...) When necessary, protective clothing shall be cleaned and disinfected before reissuance. (b) Personal... 29 Labor 7 2010-07-01 2010-07-01 false Other protective measures. 1918.105 Section 1918.105 Labor...

Analysis of redox additive-based overcharge protection for rechargeable lithium batteries

NASA Technical Reports Server (NTRS)

Narayanan, S. R.; Surampudi, S.; Attia, A. I.; Bankston, C. P.

1991-01-01

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection, has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. Digital simulation of the overcharge experiment leads to numerical representation of the potential transients, and estimate of the influence of diffusion coefficient and interelectrode distance on the transient attainment of the steady state during overcharge. The model has been experimentally verified using 1,1-prime-dimethyl ferrocene as a redox additive. The analysis of the experimental results in terms of the theory allows the calculation of the diffusion coefficient and the formal potential of the redox couple. The model and the theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

10 CFR 73.60 - Additional requirements for physical protection at nonpower reactors.

Code of Federal Regulations, 2012 CFR

2012-01-01

... nonpower reactors licensed to operate at or above a power level of 2 megawatts thermal. [38 FR 35430, Dec... OF PLANTS AND MATERIALS Physical Protection Requirements at Fixed Sites § 73.60 Additional...

10 CFR 73.60 - Additional requirements for physical protection at nonpower reactors.

Code of Federal Regulations, 2013 CFR

2013-01-01

... nonpower reactors licensed to operate at or above a power level of 2 megawatts thermal. [38 FR 35430, Dec... OF PLANTS AND MATERIALS Physical Protection Requirements at Fixed Sites § 73.60 Additional...

10 CFR 73.60 - Additional requirements for physical protection at nonpower reactors.

Code of Federal Regulations, 2014 CFR

2014-01-01

... nonpower reactors licensed to operate at or above a power level of 2 megawatts thermal. [38 FR 35430, Dec... OF PLANTS AND MATERIALS Physical Protection Requirements at Fixed Sites § 73.60 Additional...

Method for reducing measurement errors of a Langmuir probe with a protective RF shield

NASA Astrophysics Data System (ADS)

Riaby, V.; Masherov, P.; Savinov, V.; Yakunin, V.

2018-04-01

Probe measurements were conducted in the middle cross-section of an inductive, low-pressure xenon plasma using a straight cylindrical Langmuir probe with a bare metal shield that protected the probe from radio frequency interference. As a result, reliable radial distributions of the plasma parameters were obtained. Subsequent analyses of these measurements revealed that the electron energy distribution function (EEDF) deviated substantially from the Maxwellian functions and that this deviation depended on the length of the probe shield. To evaluate the shield's influence on the measurement results, in addition to the probe (which was moved radially as its shield length varied in the range of lsh1 = lmax-0), an additional L-shaped probe was inserted at a different location. This probe was moved differently from the first probe and provided confirmational measurements in the common special position where lsh1 = 0 and lsh2 ≠ 0. In this position, the second shield decreased all the plasma parameters. A comparison of the probe datasets identified the principles of the relationships between measurement errors and EEDF distortions caused by the bare probe shields. This dependence was used to correct the measurements performed using the first probe by eliminating the influence of its shield. Physical analyses based on earlier studies showed that these peculiarities are caused by a short-circuited double-probe effect that occurs in bare metal probe protective shields.

46 CFR Sec. 5 - Measures to protect ship's payrolls.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 8 2012-10-01 2012-10-01 false Measures to protect ship's payrolls. Sec. 5 Section 5 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION A-NATIONAL SHIPPING AUTHORITY BONDING OF SHIP'S PERSONNEL Sec. 5 Measures to protect ship's payrolls. (a) General Agents are not required to...

A New Way to Measure the World's Protected Area Coverage

PubMed Central

Barr, Lissa M.; Pressey, Robert L.; Fuller, Richard A.; Segan, Daniel B.; McDonald-Madden, Eve; Possingham, Hugh P.

2011-01-01

Protected areas are effective at stopping biodiversity loss, but their placement is constrained by the needs of people. Consequently protected areas are often biased toward areas that are unattractive for other human uses. Current reporting metrics that emphasise the total area protected do not account for this bias. To address this problem we propose that the distribution of protected areas be evaluated with an economic metric used to quantify inequality in income— the Gini coefficient. Using a modified version of this measure we discover that 73% of countries have inequitably protected their biodiversity and that common measures of protected area coverage do not adequately reveal this bias. Used in combination with total percentage protection, the Gini coefficient will improve the effectiveness of reporting on the growth of protected area coverage, paving the way for better representation of the world's biodiversity. PMID:21957458

46 CFR Sec. 5 - Measures to protect ship's payrolls.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Measures to protect ship's payrolls. Sec. 5 Section 5... SHIP'S PERSONNEL Sec. 5 Measures to protect ship's payrolls. (a) General Agents are not required to... paying off the crew should be either the Master, or purser, or some other member of the ship's personnel...

46 CFR Sec. 5 - Measures to protect ship's payrolls.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 8 2011-10-01 2011-10-01 false Measures to protect ship's payrolls. Sec. 5 Section 5... SHIP'S PERSONNEL Sec. 5 Measures to protect ship's payrolls. (a) General Agents are not required to... paying off the crew should be either the Master, or purser, or some other member of the ship's personnel...

46 CFR Sec. 5 - Measures to protect ship's payrolls.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 8 2014-10-01 2014-10-01 false Measures to protect ship's payrolls. Sec. 5 Section 5... SHIP'S PERSONNEL Sec. 5 Measures to protect ship's payrolls. (a) General Agents are not required to... paying off the crew should be either the Master, or purser, or some other member of the ship's personnel...

46 CFR Sec. 5 - Measures to protect ship's payrolls.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 8 2013-10-01 2013-10-01 false Measures to protect ship's payrolls. Sec. 5 Section 5... SHIP'S PERSONNEL Sec. 5 Measures to protect ship's payrolls. (a) General Agents are not required to... paying off the crew should be either the Master, or purser, or some other member of the ship's personnel...

Impact of rockfalls on protection measures: an experimental approach

NASA Astrophysics Data System (ADS)

Yuan, J.; Li, Y.; Huang, R.; Pei, X.

2015-01-01

The determination of rockfall impact force is crucial in designing the protection measures. In the present study, laboratory tests are carried out by taking the weight and shape of the falling rock fragments, drop height, incident angle, platform on the slideway and cushion layer on the protection measures as factors to investigate their influences on the impact force. The test results indicate that the impact force is positively exponential to the weight of rockfall and the instantaneous impact velocity of the rockfall approaching the protection measures. The impact velocity is found to be dominated not only by the drop height but also by the shape of rockfall as well as the length of the platform on the slideway. A great drop height and/or a short platform produce a fast impact velocity. Spherical rockfalls experience a reater impact velocity than cubic and cylindrical ones. A layer of cushion on the protection measures may reduce the impact force to a greater extent. The reduction effects are dominated by the cushion material and the thickness of the cushion layer. The thicker the cushion layer, the greater the reduction effect and the less the impact force. The stiffer the buffer material, the less the buffering effect and the greater the impact force. The present study indicates that the current standard in China for designing protection measures may overestimate the impact force by taking no consideration for the rockfall shape, platform and cushion layer.

Reversible oxygen addition on a triplet sensitizer molecule: protection from excited state depopulation.

PubMed

Filatov, Mikhail A; Heinrich, Ernesta; Busko, Dmitry; Ilieva, Iliyana Z; Landfester, Katharina; Baluschev, Stanislav

2015-03-07

We demonstrate that photoactivated oxygen addition to diphenylanthracene moities can be used as a tool for protection of porphyrin's phosphorescence against oxygen quenching. Phosphorescent palladium(II) tetrabenzoporphyrin, covalently linked to four diphenylanthracene moieties, was synthesized and studied. Upon irradiation with ambient light or red laser in solution in air, addition of oxygen and formation of the corresponding endoperoxides were observed. Heating of the irradiated samples afforded the parent porphyrin material.

Creating Protected Areas on Public Lands: Is There Room for Additional Conservation?

PubMed

Arriagada, Rodrigo A; Echeverria, Cristian M; Moya, Danisa E

2016-01-01

Most evaluations of the effectiveness of PAs have relied on indirect estimates based on comparisons between protected and unprotected areas. Such methods can be biased when protection is not randomly assigned. We add to the growing literature on the impact of PAs by answering the following research questions: What is the impact of Chilean PAs on deforestation which occurred between 1986 and 2011? How do estimates of the impact of PAs vary when using only public land as control units? We show that the characteristics of the areas in which protected and unprotected lands are located differ significantly. To satisfactorily estimate the effects of PAs, we use matching methods to define adequate control groups, but not as in previous research. We construct control groups using separately non-protected private areas and non-protected public lands. We find that PAs avoid deforestation when using unprotected private lands as valid controls, however results show no impact when the control group is based only on unprotected public land. Different land management regimes, and higher levels of enforcement inside public lands may reduce the opportunity to add additional conservation benefits when the national systems for PAs are based on the protection of previously unprotected public lands. Given that not all PAs are established to avoid deforestation, results also admit the potential for future studies to include other outcomes including forest degradation (not just deforestation), biodiversity, wildlife, primary forests (not forests in general), among others.

Creating Protected Areas on Public Lands: Is There Room for Additional Conservation?

PubMed Central

Arriagada, Rodrigo A.; Echeverria, Cristian M.; Moya, Danisa E.

2016-01-01

Most evaluations of the effectiveness of PAs have relied on indirect estimates based on comparisons between protected and unprotected areas. Such methods can be biased when protection is not randomly assigned. We add to the growing literature on the impact of PAs by answering the following research questions: What is the impact of Chilean PAs on deforestation which occurred between 1986 and 2011? How do estimates of the impact of PAs vary when using only public land as control units? We show that the characteristics of the areas in which protected and unprotected lands are located differ significantly. To satisfactorily estimate the effects of PAs, we use matching methods to define adequate control groups, but not as in previous research. We construct control groups using separately non-protected private areas and non-protected public lands. We find that PAs avoid deforestation when using unprotected private lands as valid controls, however results show no impact when the control group is based only on unprotected public land. Different land management regimes, and higher levels of enforcement inside public lands may reduce the opportunity to add additional conservation benefits when the national systems for PAs are based on the protection of previously unprotected public lands. Given that not all PAs are established to avoid deforestation, results also admit the potential for future studies to include other outcomes including forest degradation (not just deforestation), biodiversity, wildlife, primary forests (not forests in general), among others. PMID:26848856

SITE-SPECIFIC MEASUREMENTS OF RESIDENTIAL RADON PROTECTION CATEGORY

EPA Science Inventory

The report describes a series of benchmark measurements of soil radon potential at seven Florida sites and compares the measurements with regional estimates of radon potential from the Florida radon protection map. The measurements and map were developed under the Florida Radon R...

Surface texture measurement for additive manufacturing

NASA Astrophysics Data System (ADS)

Triantaphyllou, Andrew; Giusca, Claudiu L.; Macaulay, Gavin D.; Roerig, Felix; Hoebel, Matthias; Leach, Richard K.; Tomita, Ben; Milne, Katherine A.

2015-06-01

The surface texture of additively manufactured metallic surfaces made by powder bed methods is affected by a number of factors, including the powder’s particle size distribution, the effect of the heat source, the thickness of the printed layers, the angle of the surface relative to the horizontal build bed and the effect of any post processing/finishing. The aim of the research reported here is to understand the way these surfaces should be measured in order to characterise them. In published research to date, the surface texture is generally reported as an Ra value, measured across the lay. The appropriateness of this method for such surfaces is investigated here. A preliminary investigation was carried out on two additive manufacturing processes—selective laser melting (SLM) and electron beam melting (EBM)—focusing on the effect of build angle and post processing. The surfaces were measured using both tactile and optical methods and a range of profile and areal parameters were reported. Test coupons were manufactured at four angles relative to the horizontal plane of the powder bed using both SLM and EBM. The effect of lay—caused by the layered nature of the manufacturing process—was investigated, as was the required sample area for optical measurements. The surfaces were also measured before and after grit blasting.

Change in cardio-protective medication and health-related quality of life after diagnosis of screen-detected diabetes: Results from the ADDITION-Cambridge cohort.

PubMed

Black, J A; Long, G H; Sharp, S J; Kuznetsov, L; Boothby, C E; Griffin, S J; Simmons, R K

2015-07-01

Establishing a balance between the benefits and harms of treatment is important among individuals with screen-detected diabetes, for whom the burden of treatment might be higher than the burden of the disease. We described the association between cardio-protective medication and health-related quality of life (HRQoL) among individuals with screen-detected diabetes. 867 participants with screen-detected diabetes underwent clinical measurements at diagnosis, one and five years. General HRQoL (EQ5D) was measured at baseline, one- and five-years, and diabetes-specific HRQoL (ADDQoL-AWI) and health status (SF-36) at one and five years. Multivariable linear regression was used to quantify the association between change in HRQoL and change in cardio-protective medication. The median (IQR) number of prescribed cardio-protective agents was 2 (1 to 3) at diagnosis, 3 (2 to 4) at one year and 4 (3 to 5) at five years. Change in cardio-protective medication was not associated with change in HRQoL from diagnosis to one year. From one year to five years, change in cardio-protective agents was not associated with change in the SF-36 mental health score. One additional agent was associated with an increase in the SF-36 physical health score (2.1; 95%CI 0.4, 3.8) and an increase in the EQ-5D (0.05; 95%CI 0.02, 0.08). Conversely, one additional agent was associated with a decrease in the ADDQoL-AWI (-0.32; 95%CI -0.51, -0.13), compared to no change. We found little evidence that increases in the number of cardio-protective medications impacted negatively on HRQoL among individuals with screen-detected diabetes over five years. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Load Measurement on Foundations of Rockfall Protection Systems

PubMed Central

Volkwein, Axel; Kummer, Peter; Bitnel, Hueseyin; Campana, Lorenzo

2016-01-01

Rockfall protection barriers are connected to the ground using steel cables fixed with anchors and foundations for the steel posts. It is common practice to measure the forces in the cables, while to date measurements of forces in the foundations have been inadequately resolved. An overview is presented of existing methods to measure the loads on the post foundations of rockfall protection barriers. Addressing some of the inadequacies of existing approaches, a novel sensor unit is presented that is able to capture the forces acting on post foundations in all six degrees of freedom. The sensor unit consists of four triaxial force sensors placed between two steel plates. To correctly convert the measurements into the directional forces acting on the foundation a special in-situ calibration procedure is proposed that delivers a corresponding conversion matrix. PMID:26840315

A method exploiting direct communication between phasor measurement units for power system wide-area protection and control algorithms.

PubMed

Almas, Muhammad Shoaib; Vanfretti, Luigi

2017-01-01

Synchrophasor measurements from Phasor Measurement Units (PMUs) are the primary sensors used to deploy Wide-Area Monitoring, Protection and Control (WAMPAC) systems. PMUs stream out synchrophasor measurements through the IEEE C37.118.2 protocol using TCP/IP or UDP/IP. The proposed method establishes a direct communication between two PMUs, thus eliminating the requirement of an intermediate phasor data concentrator, data mediator and/or protocol parser and thereby ensuring minimum communication latency without considering communication link delays. This method allows utilizing synchrophasor measurements internally in a PMU to deploy custom protection and control algorithms. These algorithms are deployed using protection logic equations which are supported by all the PMU vendors. Moreover, this method reduces overall equipment cost as the algorithms execute internally in a PMU and therefore does not require any additional controller for their deployment. The proposed method can be utilized for fast prototyping of wide-area measurements based protection and control applications. The proposed method is tested by coupling commercial PMUs as Hardware-in-the-Loop (HIL) with Opal-RT's eMEGAsim Real-Time Simulator (RTS). As illustrative example, anti-islanding protection application is deployed using proposed method and its performance is assessed. The essential points in the method are: •Bypassing intermediate phasor data concentrator or protocol parsers as the synchrophasors are communicated directly between the PMUs (minimizes communication delays).•Wide Area Protection and Control Algorithm is deployed using logic equations in the client PMU, therefore eliminating the requirement for an external hardware controller (cost curtailment)•Effortless means to exploit PMU measurements in an environment familiar to protection engineers.

PHITS simulations of the Protective curtain experiment onboard the Service module of ISS: Comparison with absorbed doses measured with TLDs

NASA Astrophysics Data System (ADS)

Ploc, Ondřej; Sihver, Lembit; Kartashov, Dmitry; Shurshakov, Vyacheslav; Tolochek, Raisa

2013-12-01

"Protective curtain" was the physical experiment onboard the International Space Station (ISS) aimed on radiation measurement of the dose - reducing effect of the additional shielding made of hygienic water-soaked wipes and towels placed on the wall in the crew cabin of the Service module Zvezda. The measurements were performed with 12 detector packages composed of thermoluminescent detectors (TLDs) and plastic nuclear track detectors (PNTDs) placed at the Protective curtain, so that they created pairs of shielded and unshielded detectors.

Studies on nano-additive for the substitution of hazardous chemical substances in antifouling coatings for the protection of ship hulls.

PubMed

Zhao, Xiaodong; Fan, Weijie; Duan, Jizhou; Hou, Baorong

2014-07-01

Adhesion and growth of biofouling organisms have severe influence on the reliability, service life and environmental adaptability of marine ships. Based on the bactericidal capacity of cuprous oxide and photochemical effect of nano-additive, environment-friendly and efficient marine antifouling paints were prepared in this study. The evaluation of the antifouling paints was carried out by the laboratory method using bacteria and phytoplanktonic microorganisms as target organisms, as well as measurements with panels in shallow submergence in natural seawater. Results showed good agreement of all the tests, indicating the remarkable antifouling performance of the paints. To our knowledge, this was one of the first systematic studies on effects of nano-additive for the substitution of hazardous chemical substances in antifouling coatings for the protection of ship hulls by measurements on bacterial inhibition, algal adhesion and growth of large organisms.

Measuring the effectiveness of protected area networks in reducing deforestation.

PubMed

Andam, Kwaw S; Ferraro, Paul J; Pfaff, Alexander; Sanchez-Azofeifa, G Arturo; Robalino, Juan A

2008-10-21

Global efforts to reduce tropical deforestation rely heavily on the establishment of protected areas. Measuring the effectiveness of these areas is difficult because the amount of deforestation that would have occurred in the absence of legal protection cannot be directly observed. Conventional methods of evaluating the effectiveness of protected areas can be biased because protection is not randomly assigned and because protection can induce deforestation spillovers (displacement) to neighboring forests. We demonstrate that estimates of effectiveness can be substantially improved by controlling for biases along dimensions that are observable, measuring spatial spillovers, and testing the sensitivity of estimates to potential hidden biases. We apply matching methods to evaluate the impact on deforestation of Costa Rica's renowned protected-area system between 1960 and 1997. We find that protection reduced deforestation: approximately 10% of the protected forests would have been deforested had they not been protected. Conventional approaches to evaluating conservation impact, which fail to control for observable covariates correlated with both protection and deforestation, substantially overestimate avoided deforestation (by over 65%, based on our estimates). We also find that deforestation spillovers from protected to unprotected forests are negligible. Our conclusions are robust to potential hidden bias, as well as to changes in modeling assumptions. Our results show that, with appropriate empirical methods, conservation scientists and policy makers can better understand the relationships between human and natural systems and can use this to guide their attempts to protect critical ecosystem services.

Protective measurement of the wave function of a single squeezed harmonic-oscillator state

NASA Astrophysics Data System (ADS)

Alter, Orly; Yamamoto, Yoshihisa

1996-05-01

A scheme for the "protective measurement"

Measurements of the UVR protection provided by hats used at school.

PubMed

Gies, Peter; Javorniczky, John; Roy, Colin; Henderson, Stuart

2006-01-01

The importance of protection against solar ultraviolet radiation (UVR) in childhood has lead to SunSmart policies at Australian schools, in particular primary schools, where children are encouraged and in many cases required to wear hats at school. Hat styles change regularly and the UVR protection provided by some of the hat types currently used and recommended for sun protection by the various Australian state cancer councils had not been previously evaluated. The UVR protection of the hats was measured using UVR sensitive polysulphone film badges attached to different facial sites on rotating headforms. The sun protection type hats included in this study were broad-brimmed hats, "bucket hats" and legionnaires hats. Baseball caps, which are very popular, were also included. The broad-brimmed hats and bucket hats provided the most UVR protection for the six different sites about the face and head. Legionnaires hats also provided satisfactory UVR protection, but the caps did not provide UVR protection to many of the facial sites. The highest measured UVR protection factors for facial sites other than the forehead were 8 to 10, indicating that, while some hats can be effective, they need to be used in combination with other forms of UVR protection.

Developing measurement indices to enhance protection and resilience of critical infrastructure and key resources.

PubMed

Fisher, Ronald E; Norman, Michael

2010-07-01

The US Department of Homeland Security (DHS) is developing indices to better assist in the risk management of critical infrastructures. The first of these indices is the Protective Measures Index - a quantitative index that measures overall protection across component categories: physical security, security management, security force, information sharing, protective measures and dependencies. The Protective Measures Index, which can also be recalculated as the Vulnerability Index, is a way to compare differing protective measures (eg fence versus security training). The second of these indices is the Resilience Index, which assesses a site's resilience and consists of three primary components: robustness, resourcefulness and recovery. The third index is the Criticality Index, which assesses the importance of a facility. The Criticality Index includes economic, human, governance and mass evacuation impacts. The Protective Measures Index, Resilience Index and Criticality Index are being developed as part of the Enhanced Critical Infrastructure Protection initiative that DHS protective security advisers implement across the nation at critical facilities. This paper describes two core themes: determination of the vulnerability, resilience and criticality of a facility and comparison of the indices at different facilities.

Femtosecond Laser Eyewear Protection: Measurements and Precautions

PubMed Central

Stromberg, Christopher J.; Hadler, Joshua A.; Alberding, Brian G.; Heilweil, Edwin J.

2018-01-01

Ultrafast laser systems are becoming more widespread throughout the research and industrial communities yet eye protection for these high power, bright pulsed sources still require scrupulous characterization and testing before use. Femtosecond lasers, with pulses naturally possessing broad-bandwidth and high average power with variable repetition rate, can exhibit spectral side-bands and subtly changing center wavelengths, which may unknowingly affect eyewear safety protection. Pulse spectral characterization and power diagnostics are presented for a 80 MHz, Ti+3:Sapphire, ≈ 800 nm, ≈40 femtosecond oscillator system. Power and spectral transmission for 22 test samples are measured to determine whether they fall within manufacturer specifications. PMID:29353984

Femtosecond Laser Eyewear Protection: Measurements and Precautions.

PubMed

Stromberg, Christopher J; Hadler, Joshua A; Alberding, Brian G; Heilweil, Edwin J

2017-11-01

Ultrafast laser systems are becoming more widespread throughout the research and industrial communities yet eye protection for these high power, bright pulsed sources still require scrupulous characterization and testing before use. Femtosecond lasers, with pulses naturally possessing broad-bandwidth and high average power with variable repetition rate, can exhibit spectral side-bands and subtly changing center wavelengths, which may unknowingly affect eyewear safety protection. Pulse spectral characterization and power diagnostics are presented for a 80 MHz, Ti +3 :Sapphire, ≈ 800 nm, ≈40 femtosecond oscillator system. Power and spectral transmission for 22 test samples are measured to determine whether they fall within manufacturer specifications.

Measurements in flame retardant textiles and protective clothing using an instrumented

NASA Astrophysics Data System (ADS)

Kort-Kamp, V. M.; Santos, A. M.; Azevedo, A. F.; Lima, R. M. V.; Bittencourt, E.

2018-03-01

The flame test manikin system can be used to evaluate the performance of thermal protective clothing under fire simulation conditions. Different weights of thermal protective garments were tested and the total clothed burn injury area decreased as the fabric weight increased. In addition, a comparison of different compositions for the same weight was analyzed too.

[Comprehensive evaluation of protective measures in electric welding].

PubMed

Ye, K; Zhao, Z

1995-03-01

Protective effects of safety masks, eyewear, work clothes, gloves, periodically physical examination system, and ventilation and barriers at workplace, were evaluated by one-way analysis for handtorch welding, carbon dioxide gas-protective welding, and argon-arc welding operations, etc. in township and village enterprises and state-owned enterprises by interviewing managers in the departments of technology and work safety and field investigating. Based on the results of one-way analysis of protective measures, comprehensive evaluations of various enterprises were made with a fussy mathematical model. Both enterprises in township and village level and of state-owned were graded as A on a basis of the evaluation, which will be helpful to the better management of occupational health in the future.

Collaborative Russian-US work in nuclear material protection, control and accounting at the Institute of Physics and Power Engineering. 2: Extension to additional facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuzin, V.V.; Pshakin, G.M.; Belov, A.P.

1996-12-31

During 1995, collaborative Russian-US nuclear material protection, control, and accounting (MPC and A) tasks at the Institute of Physics and Power Engineering (IPPE) in Obninsk, Russia focused on improving the protection of nuclear materials at the BFS Fast Critical Facility. BFS has tens of thousands of fuel disks containing highly enriched uranium and weapons-grade plutonium that are used to simulate the core configurations of experimental reactors in two critical assemblies. Completed tasks culminated in demonstrations of newly implemented equipment (Russian and US) and methods that enhanced the MPC and A at BFS through computerized accounting, nondestructive inventory verification measurements, personnelmore » identification and access control, physical inventory taking, physical protection, and video surveillance. The collaborative work with US Department of Energy national laboratories is now being extended. In 1996 additional tasks to improve MPC and A have been implemented at BFS, the Technological Laboratory for Fuel Fabrication (TLFF) the Central Storage Facility (CSF), and for the entire site. The TLFF reclads BFS uranium metal fuel disks (process operations and transfers of fissile material). The CSF contains many different types of nuclear material. MPC and A at these additional facilities will be integrated with that at BFS as a prototype site-wide approach. Additional site-wide tasks encompass communications and tamper-indicating devices. Finally, new storage alternatives are being implemented that will consolidate the more attractive nuclear materials in a better-protected nuclear island. The work this year represents not just the addition of new facilities and the site-wide approach, but the systematization of the MPC and A elements that are being implemented as a first step and the more comprehensive ones planned.« less

Polyfibroblast: A Self-Healing and Galvanic Protection Additive

DTIC Science & Technology

2012-09-12

self-healing and galvanic protection capacity to the primer (Figure 1). Polyfibroblast consists of paint-filled microcapsules and zinc powder. It has...significant added cost. Microcapsule Figure 1. Polyfibroblast contains fresh paint encapsulated in polymer shells plus Zn powder. When scratched, resin...from the broken microcapsules fills the crack to form a polymer scar. Zn powder supplies galvanic protection in the event of incomplete healing

Influence of Additives on Masonry and Protective Paints’ Quality

NASA Astrophysics Data System (ADS)

Kostiunina, I. L.; Vyboishchik, A. V.

2017-11-01

The environment is one of main factors influencing the living conditions of urban population in Russia nowadays. One of the main drawbacks restraining the aesthetic improvement process of modern Russian cities is unsatisfactory protection of buildings from atmospheric phenomena. Moreover, industrial waste in modern industrial cities of Russia prevents a long-lasting decoration of urban buildings. The article presents an overview of the composition and physical properties of masonry paints applied in the Chelyabinsk region. The traditional technology of coatings obtaining is studied, the drawbacks of this technology are examined, the new materials and applications are offered. The influence of additives on the basic properties of masonry paints, viz. weather resistance, viscosity, hardness, cost, is considered. The application of new technologies utilizing industrial waste can solve the abovestated problem, which also, along with improving basic physical and chemical properties, will result in the cost reduction and the increase of the masonry paints hardness.

50 CFR 622.29 - Conservation measures for protected resources.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false Conservation measures for protected resources. 622.29 Section 622.29 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL..., AND SOUTH ATLANTIC Reef Fish Resources of the Gulf of Mexico § 622.29 Conservation measures for...

50 CFR 622.29 - Conservation measures for protected resources.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 12 2014-10-01 2014-10-01 false Conservation measures for protected resources. 622.29 Section 622.29 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL..., AND SOUTH ATLANTIC Reef Fish Resources of the Gulf of Mexico § 622.29 Conservation measures for...

Modeling of snow avalanches for protection measures designing

NASA Astrophysics Data System (ADS)

Turchaninova, Alla; Lazarev, Anton; Loginova, Ekaterina; Seliverstov, Yuri; Glazovskaya, Tatiana; Komarov, Anton

2017-04-01

Avalanche protection structures such as dams have to be designed using well known standard engineering procedures that differ in different countries. Our intent is to conduct a research on structural avalanche protection measures designing and their reliability assessment during the operation using numerical modeling. In the Khibini Mountains, Russia, several avalanche dams have been constructed at different times to protect settlements and mining. Compared with other mitigation structures dams are often less expensive to construct in mining regions. The main goal of our investigation was to test the capabilities of Swiss avalanche dynamics model RAMMS and Russian methods to simulate the interaction of avalanches with mitigation structures such as catching and reflecting dams as well as to reach the observed runout distances after the transition through a dam. We present the RAMMS back-calculation results of an artificially triggered and well-documented catastrophic avalanche occurred in the town of Kirovsk, Khibini Mountains in February 2016 that has unexpectedly passed through a system of two catching dams and took the lives of 3 victims. The estimated volume of an avalanche was approximately 120,000 m3. For the calculation we used a 5 m DEM including catching dams generated from field measurements in summer 2015. We simulated this avalanche (occurred below 1000 m.a.s.l.) in RAMMS having taken the friction parameters (µ and ζ) from the upper altitude limit (above 1500 m.a.s.l.) from the table recommended for Switzerland (implemented into RAMMS) according to the results of our previous research. RAMMS reproduced the observed avalanche behavior and runout distance. No information is available concerning the flow velocity; however, calculated values correspond in general to the values measured in this avalanche track before. We applied RAMMS using an option of adding structures to DEM (including a dam in GIS) in other to test other operating catching dams in

Analysis of Air Toxics From NOAA WP-3 Aircraft Measurements During the TexAQS 2006 Campaign: Comparison With Emission Inventories and Additive Inhalation Risk Factors

NASA Astrophysics Data System (ADS)

Del Negro, L. A.; Warneke, C.; de Gouw, J. A.; Atlas, E.; Lueb, R.; Zhu, X.; Pope, L.; Schauffler, S.; Hendershot, R.; Washenfelder, R.; Fried, A.; Richter, D.; Walega, J. G.; Weibring, P.

2007-12-01

Benzene and nine other air toxics classified as human carcinogens by the International Agency for Research on Cancer (IARC) were measured from the NOAA WP-3 aircraft during the TexAQS 2006 campaign. In-situ measurements of benzene, measured with a PTR-MS instrument, are used to estimate emission fluxes for comparison with point source emission inventories developed by the Texas Commission on Environmental Quality. Mean and median mixing ratios for benzene, acetaldehyde, formaldehyde, 1,3-butadiene, carbon tetrachloride, chloroform, 1,2-dichloroethane, dibromoethane, dichloromethane, and vinyl chloride, encountered over the city of Houston during the campaign, are combined with inhalation unit risk factor values developed by the California Environmental Protection Agency and the United States Environmental Protection Agency to estimate the additive inhalation risk factor. This additive risk factor represents the risk associated with lifetime (70 year) exposure at the levels measured and should not be used as an absolute indicator of risk to individuals. However, the results are useful for assessments of changing relative risk over time, and for identifying dominant contributions to the overall air toxic risk.

Vegephy: impact of vegetable oils used as extemporaneous additives on pesticide residues and their crop protection potential.

PubMed

Rousseau, G; Coutanceau, P; Lebeau, F; Pigeon, O; Ducat, N; De Vos, P

2013-01-01

Within the framework of the VEGEPHY project set up to assess the effect of refined oils used as extemporaneous additives, both alone and in combination with oligosaccharides (guar, xanthan and carboxymethyl cellulose), on the quality of plant protection treatments for wheat, a study was conducted on the effect of combinations of additives on the level of pesticide residues in wheat plants and grain and their impact on treatment efficiency. The use of some of these additives gave efficiency results that were comparable with those obtained with additives that are currently used but are not bio-based. The use of refined oils as extemporaneous additives, both alone and combined with oligosaccharides, led to better penetration by the pesticide as well as longer persistence of its activity. The experiments were conducted with fungicides, herbicides, plant growth regulators and various types of formulation (EC, SC and WG). The results obtained were conclusive, but they did depend on the physico-chemical properties of the active substance. The risk of exceeding the maximum residue levels (MRLs) of pesticides was also evaluated. Even where the MRLs had not been not exceeded, the experiments showed that in some cases the treatment with these additives could lead to pesticide residues up to two times higher than those measured for the treatment without additives. It would be necessary, therefore, to reduce the treatment dose associated with the additive and/or have a long enough pre-harvest interval to avoid exceeding the MRLs. The use of green additives could be a useful and easy way to attain the European Union (EU) goal of reducing pesticide use by improving the retention of active substances on the plant and reducing the number of treatments.

Solid polymer electrolyte electrochemical storage cell containing a redox shuttle additive for overcharge protection

DOEpatents

Richardson, Thomas J.; Ross, Philip N.

1999-01-01

A class of organic redox shuttle additives is described, preferably comprising nitrogen-containing aromatics compounds, which can be used in a high temperature (85.degree. C. or higher) electrochemical storage cell comprising a positive electrode, a negative electrode, and a solid polymer electrolyte to provide overcharge protection to the cell. The organic redox additives or shuttles are characterized by a high diffusion coefficient of at least 2.1.times.10.sup.-8 cm.sup.2 /second and a high onset potential of 2.5 volts or higher. Examples of such organic redox shuttle additives include an alkali metal salt of 1,2,4-triazole, an alkali metal salt of imidazole, 2,3,5,6-tetramethylpyrazine, 1,3,5-tricyanobenzene, and a dialkali metal salt of 3-4-dihydroxy-3-cyclobutene-1,2-dione.

Measuring benefits of protected area management: trends across realms and research gaps for freshwater systems.

PubMed

Adams, Vanessa M; Setterfield, Samantha A; Douglas, Michael M; Kennard, Mark J; Ferdinands, Keith

2015-11-05

Protected areas remain a cornerstone for global conservation. However, their effectiveness at halting biodiversity decline is not fully understood. Studies of protected area benefits have largely focused on measuring their impact on halting deforestation and have neglected to measure the impacts of protected areas on other threats. Evaluations that measure the impact of protected area management require more complex evaluation designs and datasets. This is the case across realms (terrestrial, freshwater, marine), but measuring the impact of protected area management in freshwater systems may be even more difficult owing to the high level of connectivity and potential for threat propagation within systems (e.g. downstream flow of pollution). We review the potential barriers to conducting impact evaluation for protected area management in freshwater systems. We contrast the barriers identified for freshwater systems to terrestrial systems and discuss potential measurable outcomes and confounders associated with protected area management across the two realms. We identify key research gaps in conducting impact evaluation in freshwater systems that relate to three of their major characteristics: variability, connectivity and time lags in outcomes. Lastly, we use Kakadu National Park world heritage area, the largest national park in Australia, as a case study to illustrate the challenges of measuring impacts of protected area management programmes for environmental outcomes in freshwater systems. © 2015 The Author(s).

Measuring benefits of protected area management: trends across realms and research gaps for freshwater systems

PubMed Central

Adams, Vanessa M.; Setterfield, Samantha A.; Douglas, Michael M.; Kennard, Mark J.; Ferdinands, Keith

2015-01-01

Protected areas remain a cornerstone for global conservation. However, their effectiveness at halting biodiversity decline is not fully understood. Studies of protected area benefits have largely focused on measuring their impact on halting deforestation and have neglected to measure the impacts of protected areas on other threats. Evaluations that measure the impact of protected area management require more complex evaluation designs and datasets. This is the case across realms (terrestrial, freshwater, marine), but measuring the impact of protected area management in freshwater systems may be even more difficult owing to the high level of connectivity and potential for threat propagation within systems (e.g. downstream flow of pollution). We review the potential barriers to conducting impact evaluation for protected area management in freshwater systems. We contrast the barriers identified for freshwater systems to terrestrial systems and discuss potential measurable outcomes and confounders associated with protected area management across the two realms. We identify key research gaps in conducting impact evaluation in freshwater systems that relate to three of their major characteristics: variability, connectivity and time lags in outcomes. Lastly, we use Kakadu National Park world heritage area, the largest national park in Australia, as a case study to illustrate the challenges of measuring impacts of protected area management programmes for environmental outcomes in freshwater systems. PMID:26460127

Selectivity in the Addition Reactions of Organometallic Reagents to Aziridine-2-carboxaldehydes: The Effects of Protecting Groups and Substitution Patterns

PubMed Central

Kulshrestha, Aman; Schomaker, Jennifer M.; Holmes, Daniel; Staples, Richard J.; Jackson, James E.; Borhan, Babak

2014-01-01

Good to excellent stereo-selectivity has been found in the addition reactions of Grignard and organo-zinc reagents to N-protected aziridine-2-carboxaldehydes. Specifically, high syn selectivity was obtained with benzyl-protected cis, tert-butyloxycar-bonyl-protected trans, and tosyl-pro-tected 2,3-disubstituted aziridine-2-car-boxaldehydes. Furthermore, rate and selectivity effects of ring substituents, temperature, solvent, and Lewis acid and base modifiers were studied. The diastereomeric preference of addition is dominated by the substrate aziri-dines’ substitution pattern and especially the electronic character and conformational preferences of the nitrogen protecting groups. To help rationalize the observed stereochemical outcomes, conformational and electronic structural analyses of a series of model systems representing the various substitution patterns have been explored by density functional calculations at the B3LYP/6–31G* level of theory with the SM8 solvation model to account for solvent effects. PMID:21928447

78 FR 55765 - Compensatory and Alternative Regulatory Measures for Nuclear Power Plant Fire Protection (CARMEN...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-11

... Nuclear Power Plant Fire Protection (CARMEN-FIRE) AGENCY: Nuclear Regulatory Commission. ACTION: Draft..., ``Compensatory and Alternative Regulatory Measures for Nuclear Power Plant Fire Protection (CARMEN-FIRE).'' In... integral part of NRC-approved fire protection programs. However, compensatory measures are not expected to...

Protecting a quantum state from environmental noise by an incompatible finite-time measurement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brasil, Carlos Alexandre; Castro, L. A. de; Napolitano, R. d. J.

We show that measurements of finite duration performed on an open two-state system can protect the initial state from a phase-noisy environment, provided the measured observable does not commute with the perturbing interaction. When the measured observable commutes with the environmental interaction, the finite-duration measurement accelerates the rate of decoherence induced by the phase noise. For the description of the measurement of an observable that is incompatible with the interaction between system and environment, we have found an approximate analytical expression, valid at zero temperature and weak coupling with the measuring device. We have tested the validity of the analyticalmore » predictions against an exact numerical approach, based on the superoperator-splitting method, that confirms the protection of the initial state of the system. When the coupling between the system and the measuring apparatus increases beyond the range of validity of the analytical approximation, the initial state is still protected by the finite-time measurement, according with the exact numerical calculations.« less

Analysis of Protection Measures for Naval Vessels Berthed at Harbor Against Terrorist Attacks

DTIC Science & Technology

2016-06-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release; distribution is unlimited ANALYSIS OF...2016 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE ANALYSIS OF PROTECTION MEASURES FOR NAVAL VESSELS BERTHED AT HARBOR... ANALYSIS OF PROTECTION MEASURES FOR NAVAL VESSELS BERTHED AT HARBOR AGAINST TERRORIST ATTACKS Raja I. Sikandar Lieutenant Commander, Pakistan Navy

50 CFR 622.179 - Conservation measures for protected resources.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 12 2014-10-01 2014-10-01 false Conservation measures for protected resources. 622.179 Section 622.179 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL..., AND SOUTH ATLANTIC Snapper-Grouper Fishery of the South Atlantic Region § 622.179 Conservation...

50 CFR 622.179 - Conservation measures for protected resources.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false Conservation measures for protected resources. 622.179 Section 622.179 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL..., AND SOUTH ATLANTIC Snapper-Grouper Fishery of the South Atlantic Region § 622.179 Conservation...

Protecting Quantum Correlation from Correlated Amplitude Damping Channel

NASA Astrophysics Data System (ADS)

Huang, Zhiming; Zhang, Cai

2017-08-01

In this work, we investigate the dynamics of quantum correlation measured by measurement-induced nonlocality (MIN) and local quantum uncertainty (LQU) in correlated amplitude damping (CAD) channel. We find that the memory parameter brings different influences on MIN and LQU. In addition, we propose a scheme to protect quantum correlation by executing prior weak measurement (WM) and post-measurement reversal (MR). However, better protection of quantum correlation by the scheme implies a lower success probability (SP).

Influence of carbon additives on operational properties of the intumescent coatings for the fire protection of building constructions

NASA Astrophysics Data System (ADS)

Zybina, Olga; Gravit, Marina; Stein, Yelena

2017-10-01

In work ability of the intercalated graphite entered into the fireproof intumescent compositions to act as catalytically active additive raising operational characteristics of the classical distending coverings intended for fire protection of building constructions. It is established that thermal expanded graphite, as well as nano-additives, increase frequency rate, durability, elasticity, density and uniformity of a coke layer of a fireproof covering for increase of fire resistance of a building construction.

A Method for Response Time Measurement of Electrosensitive Protective Devices.

PubMed

Dźwiarek, Marek

1996-01-01

A great step toward the improvement of safety at work was made when electrosensitive protective devices (ESPDs) were applied to the protection of press and robot-assisted manufacturing system operators. The way the device is mounted is crucial. The parameters of ESPD mounting that ensure safe distance from the controlled dangerous zone are response time, sensitivity, and the dimensions of the detection zone. The proposed experimental procedure of response time measurement is realized in two steps, with a test piece penetrating the detection zone twice. In the first step, low-speed penetration (at a speed v m ) enables the detection zone border to be localized. In the second step of measurement, the probe is injected at a high speed V d . The actuator rod position is measured and when it is equal to the value L registered by the earlier measurements, counting time begins as well as the monitoring of the state of the equipment under test (EUT) output relays. After the state changes, time tp is registered. The experimental procedure is realized on a special experimental stand. Because the stand has been constructed for certification purposes, the design satisfies the requirements imposed by Polski Komitet Normalizacyjny (PKN, 1995). The experimental results prove the measurement error to be smaller than ± 0.6 ms.

Measuring Protective Behavioral Strategies for Marijuana Use Among Young Adults.

PubMed

Pedersen, Eric R; Hummer, Justin F; Rinker, Dipali Venkataraman; Traylor, Zach K; Neighbors, Clayton

2016-05-01

Marijuana use can result in a variety of negative consequences, yet it remains popular among young adults and the general public at large. Combined with the growing empirical support for the benefits of medicinal marijuana as well as the steady increase in popular opinion regarding its legalization, it is of growing importance to identify strategies that may mitigate the harms related to marijuana use, reduce consumption levels, and limit resulting negative consequences among young adults who use marijuana. The purpose of this study was to develop and conduct initial psychometric analyses on a new scale, which we named the Protective Behavioral Strategies for Marijuana (PBSM) scale. A sample of undergraduate college students who reported past-6-month marijuana use (n = 210) responded to the initial pool of PBSM items and completed measures of marijuana use, consequences from marijuana use, alcohol use, and protective behavioral strategies for alcohol. Results from an iterative principal component analyses process yielded a single-factor structure with 39 items. The PBSM mean composite score negatively associated with marijuana use and consequences, with the strongest correlations evident for pastmonth users. The PBSM also significantly positively correlated with alcohol protective strategies. Protective behavioral strategies for marijuana appear to be a measurable construct that are related to marijuana frequency and consequences, and thus may be a useful component of intervention and prevention programs with young adults. More work testing the PBSM items with larger and more diverse samples of young adults is encouraged.

Using Item Response Theory to Develop Measures of Acquisitive and Protective Self-Monitoring From the Original Self-Monitoring Scale.

PubMed

Wilmot, Michael P; Kostal, Jack W; Stillwell, David; Kosinski, Michal

2017-07-01

For the past 40 years, the conventional univariate model of self-monitoring has reigned as the dominant interpretative paradigm in the literature. However, recent findings associated with an alternative bivariate model challenge the conventional paradigm. In this study, item response theory is used to develop measures of the bivariate model of acquisitive and protective self-monitoring using original Self-Monitoring Scale (SMS) items, and data from two large, nonstudent samples ( Ns = 13,563 and 709). Results indicate that the new acquisitive (six-item) and protective (seven-item) self-monitoring scales are reliable, unbiased in terms of gender and age, and demonstrate theoretically consistent relations to measures of personality traits and cognitive ability. Additionally, by virtue of using original SMS items, previously collected responses can be reanalyzed in accordance with the alternative bivariate model. Recommendations for the reanalysis of archival SMS data, as well as directions for future research, are provided.

Occupational risk factors for skin cancer and the availability of sun protection measures at German outdoor workplaces.

PubMed

Ruppert, Linda; Ofenloch, Robert; Surber, Christian; Diepgen, Thomas

2016-08-01

Germany implemented a new occupational disease "squamous cell carcinoma or multiple actinic keratosis due to natural UV radiation (UVR)" into the German ordinance on occupational diseases. Since primary prevention is very important, the aim of this study was to assess the provision of sun protection measures by the employers in vocational school students for outdoor professions. We conducted a cross-sectional study on the availability of sun protection measures at German workplaces and the risk of occupational sunburn by surveying 245 vocational school students working in outdoor occupations. More than 40 % of the students did not receive any sun protection measures by their employer, and 34.5 % of the students got sunburned during work. Working in the shade was a protective factor for occupational sunburn but was merely available for 23.7 % of the outdoor workers. Our study reveals a strong need for effective sun protection measures, including both administrative controls like education and personal protection measures at German outdoor workplaces.

An Analysis of the Selected Materials Used in Step Measurements During Pre-Fits of Thermal Protection System Tiles and the Accuracy of Measurements Made Using These Selected Materials

NASA Technical Reports Server (NTRS)

Kranz, David William

2010-01-01

The goal of this research project was be to compare and contrast the selected materials used in step measurements during pre-fits of thermal protection system tiles and to compare and contrast the accuracy of measurements made using these selected materials. The reasoning for conducting this test was to obtain a clearer understanding to which of these materials may yield the highest accuracy rate of exacting measurements in comparison to the completed tile bond. These results in turn will be presented to United Space Alliance and Boeing North America for their own analysis and determination. Aerospace structures operate under extreme thermal environments. Hot external aerothermal environments in high Mach number flights lead to high structural temperatures. The differences between tile heights from one to another are very critical during these high Mach reentries. The Space Shuttle Thermal Protection System is a very delicate and highly calculated system. The thermal tiles on the ship are measured to within an accuracy of .001 of an inch. The accuracy of these tile measurements is critical to a successful reentry of an orbiter. This is why it is necessary to find the most accurate method for measuring the height of each tile in comparison to each of the other tiles. The test results indicated that there were indeed differences in the selected materials used in step measurements during prefits of Thermal Protection System Tiles and that Bees' Wax yielded a higher rate of accuracy when compared to the baseline test. In addition, testing for experience level in accuracy yielded no evidence of difference to be found. Lastly the use of the Trammel tool over the Shim Pack yielded variable difference for those tests.

Additive protection by LDR and FGF21 treatment against diabetic nephropathy in type 2 diabetes model.

PubMed

Shao, Minglong; Yu, Lechu; Zhang, Fangfang; Lu, Xuemian; Li, Xiaokun; Cheng, Peng; Lin, Xiufei; He, Luqing; Jin, Shunzi; Tan, Yi; Yang, Hong; Zhang, Chi; Cai, Lu

2015-07-01

The onset of diabetic nephropathy (DN) is associated with both systemic and renal changes. Fibroblast growth factor (FGF)-21 prevents diabetic complications mainly by improving systemic metabolism. In addition, low-dose radiation (LDR) protects mice from DN directly by preventing renal oxidative stress and inflammation. In the present study, we tried to define whether the combination of FGF21 and LDR could further prevent DN by blocking its systemic and renal pathogeneses. To this end, type 2 diabetes was induced by feeding a high-fat diet for 12 wk followed by a single dose injection of streptozotocin. Diabetic mice were exposed to 50 mGy LDR every other day for 4 wk with and without 1.5 mg/kg FGF21 daily for 8 wk. The changes in systemic parameters, including blood glucose levels, lipid profiles, and insulin resistance, as well as renal pathology, were examined. Diabetic mice exhibited renal dysfunction and pathological abnormalities, all of which were prevented significantly by LDR and/or FGF21; the best effects were observed in the group that received the combination treatment. Our studies revealed that the additive renal protection conferred by the combined treatment against diabetes-induced renal fibrosis, inflammation, and oxidative damage was associated with the systemic improvement of hyperglycemia, hyperlipidemia, and insulin resistance. These results suggest that the combination treatment with LDR and FGF21 prevented DN more efficiently than did either treatment alone. The mechanism behind these protective effects could be attributed to the suppression of both systemic and renal pathways. Copyright © 2015 the American Physiological Society.

Additive protection by LDR and FGF21 treatment against diabetic nephropathy in type 2 diabetes model

PubMed Central

Shao, Minglong; Yu, Lechu; Zhang, Fangfang; Lu, Xuemian; Li, Xiaokun; Cheng, Peng; Lin, Xiufei; He, Luqing; Jin, Shunzi; Tan, Yi; Yang, Hong; Cai, Lu

2015-01-01

The onset of diabetic nephropathy (DN) is associated with both systemic and renal changes. Fibroblast growth factor (FGF)-21 prevents diabetic complications mainly by improving systemic metabolism. In addition, low-dose radiation (LDR) protects mice from DN directly by preventing renal oxidative stress and inflammation. In the present study, we tried to define whether the combination of FGF21 and LDR could further prevent DN by blocking its systemic and renal pathogeneses. To this end, type 2 diabetes was induced by feeding a high-fat diet for 12 wk followed by a single dose injection of streptozotocin. Diabetic mice were exposed to 50 mGy LDR every other day for 4 wk with and without 1.5 mg/kg FGF21 daily for 8 wk. The changes in systemic parameters, including blood glucose levels, lipid profiles, and insulin resistance, as well as renal pathology, were examined. Diabetic mice exhibited renal dysfunction and pathological abnormalities, all of which were prevented significantly by LDR and/or FGF21; the best effects were observed in the group that received the combination treatment. Our studies revealed that the additive renal protection conferred by the combined treatment against diabetes-induced renal fibrosis, inflammation, and oxidative damage was associated with the systemic improvement of hyperglycemia, hyperlipidemia, and insulin resistance. These results suggest that the combination treatment with LDR and FGF21 prevented DN more efficiently than did either treatment alone. The mechanism behind these protective effects could be attributed to the suppression of both systemic and renal pathways. PMID:25968574

Measuring Protective Behavioral Strategies for Marijuana Use Among Young Adults

PubMed Central

Pedersen, Eric R.; Hummer, Justin F.; Rinker, Dipali Venkataraman; Traylor, Zach K.; Neighbors, Clayton

2016-01-01

Objective: Marijuana use can result in a variety of negative consequences, yet it remains popular among young adults and the general public at large. Combined with the growing empirical support for the benefits of medicinal marijuana as well as the steady increase in popular opinion regarding its legalization, it is of growing importance to identify strategies that may mitigate the harms related to marijuana use, reduce consumption levels, and limit resulting negative consequences among young adults who use marijuana. The purpose of this study was to develop and conduct initial psychometric analyses on a new scale, which we named the Protective Behavioral Strategies for Marijuana (PBSM) scale. Method: A sample of undergraduate college students who reported past-6-month marijuana use (n = 210) responded to the initial pool of PBSM items and completed measures of marijuana use, consequences from marijuana use, alcohol use, and protective behavioral strategies for alcohol. Results: Results from an iterative principal component analyses process yielded a single-factor structure with 39 items. The PBSM mean composite score negatively associated with marijuana use and consequences, with the strongest correlations evident for past-month users. The PBSM also significantly positively correlated with alcohol protective strategies. Conclusions: Protective behavioral strategies for marijuana appear to be a measurable construct that are related to marijuana frequency and consequences, and thus may be a useful component of intervention and prevention programs with young adults. More work testing the PBSM items with larger and more diverse samples of young adults is encouraged. PMID:27172576

Fact Sheet on Measures Required to Protect Workers from Fumigant Exposures

EPA Pesticide Factsheets

These safety measures increase protections for fumigant handlers and other agricultural workers and bystanders from exposure to the soil fumigant pesticides chloropicrin, dazomet, metam sodium, metam potassium, and methyl bromide.

Enhanced Protection against Malaria by Indoor Residual Spraying in Addition to Insecticide Treated Nets: Is It Dependent on Transmission Intensity or Net Usage?

PubMed Central

West, Philippa A.; Protopopoff, Natacha; Wright, Alexandra; Kivaju, Zuhura; Tigererwa, Robinson; Mosha, Franklin W.; Kisinza, William; Rowland, Mark; Kleinschmidt, Immo

2015-01-01

Background Insecticide treated nets (ITNs) and indoor residual spraying (IRS) are effective vector control tools that protect against malaria. There is conflicting evidence regarding whether using ITNs and IRS in combination provides additional benefit over using either of these methods alone. This study investigated factors that may modify the effect of the combined use of IRS and ITNs compared to using ITNs alone on malaria infection prevalence. Methods Secondary analysis was carried out on data from a cluster randomised trial in north-west Tanzania. 50 clusters received ITNs from a universal coverage campaign; of these 25 were randomly allocated to additionally receive two rounds of IRS in 2012. In cross-sectional household surveys children 0.5–14 years old were tested for Plasmodium falciparum infections (PfPR) two, six and ten months after the first IRS round. Results IRS protected those sleeping under nets (OR = 0.38, 95%CI 0.26–0.57) and those who did not (OR = 0.43, 95%CI 0.29–0.63). The protective effect of IRS was not modified by community level ITN use (ITN use<50%, OR = 0.39, 95%CI 0.26–0.59; ITN use> = 50%, OR = 0.46, 95%CI 0.28–0.74). The additional protection from IRS was similar in low (<10% PfPR, OR = 0.38, 95%CI 0.19–0.75) and high transmission areas (≥10% PfPR, OR = 0.34, 95%CI 0.18–0.67). ITN use was protective at the individual-level regardless of whether the village had been sprayed (OR = 0.83, 95%CI 0.70–0.98). Living in a sprayed village was protective regardless of whether the individual slept under an ITN last night (OR = 0.41, 95%CI 0.29–0.58). Interpretation Implementing IRS in addition to ITNs was beneficial for individuals from villages with a wide range of transmission intensities and net utilisation levels. Net users received additional protection from IRS. ITNs were providing some individual protection, even in this area with high levels of pyrethroid insecticide resistance. These results demonstrate that there

Progressive addition lenses--measurements and ratings.

PubMed

Sheedy, Jim; Hardy, Raymond F; Hayes, John R

2006-01-01

This study is a followup to a previous study in which the optics of several progressive addition lens (PALs) designs were measured and analyzed. The objective was to provide information about various PAL designs to enable eye care practitioners to select designs based on the particular viewing requirements of the patient. The optical properties of 12 lenses of the same power for each of 23 different PAL designs were measured with a Rotlex Class Plus lens analyzer. Lenses were ordered through optical laboratories and specified to be plano with a +2.00 diopters add. Measurements were normalized to plano at the manufacturer-assigned location for the distance power to eliminate laboratory tolerance errors. The magnitude of unwanted astigmatism and the widths and areas of the distance, intermediate, and near viewing zones were calculated from the measured data according to the same criteria used in a previous study. The optical characteristics of the different PAL designs were significantly different from one another. The differences were significant in terms of the sizes and widths of the viewing zones, the amount of unwanted astigmatism, and the minimum fitting height. Ratings of the distance, intermediate, and near viewing areas were calculated for each PAL design based on the widths and sizes of those zones. Ratings for unwanted astigmatism and recommended minimum fitting heights were also determined. Ratings based on combinations of viewing zone ratings are also reported. The ratings are intended to be used to select a PAL design that matches the particular visual needs of the patient and to evaluate the success and performance of currently worn PALs. Reasoning and task analyses suggest that these differences can be used to select a PAL design to meet the individual visual needs of the patient; clinical trials studies are required to test this hypothesis.

Modeling Errors in Daily Precipitation Measurements: Additive or Multiplicative?

NASA Technical Reports Server (NTRS)

Tian, Yudong; Huffman, George J.; Adler, Robert F.; Tang, Ling; Sapiano, Matthew; Maggioni, Viviana; Wu, Huan

2013-01-01

The definition and quantification of uncertainty depend on the error model used. For uncertainties in precipitation measurements, two types of error models have been widely adopted: the additive error model and the multiplicative error model. This leads to incompatible specifications of uncertainties and impedes intercomparison and application.In this letter, we assess the suitability of both models for satellite-based daily precipitation measurements in an effort to clarify the uncertainty representation. Three criteria were employed to evaluate the applicability of either model: (1) better separation of the systematic and random errors; (2) applicability to the large range of variability in daily precipitation; and (3) better predictive skills. It is found that the multiplicative error model is a much better choice under all three criteria. It extracted the systematic errors more cleanly, was more consistent with the large variability of precipitation measurements, and produced superior predictions of the error characteristics. The additive error model had several weaknesses, such as non constant variance resulting from systematic errors leaking into random errors, and the lack of prediction capability. Therefore, the multiplicative error model is a better choice.

The Development and Validation of the Protective Factors Survey: A Self-Report Measure of Protective Factors against Child Maltreatment

ERIC Educational Resources Information Center

Counts, Jacqueline M.; Buffington, Elenor S.; Chang-Rios, Karin; Rasmussen, Heather N.; Preacher, Kristopher J.

2010-01-01

Objective: The objective of this study was to evaluate the internal structure of a self-report measure of multiple family-level protective factors against abuse and neglect and explore the relationship of this instrument to other measures of child maltreatment. Methods: For the exploratory factor analysis, 11 agencies from 4 states administered…

Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control.

PubMed

Slotwinski, John A; Garboczi, Edward J; Hebenstreit, Keith M

2014-01-01

Additive manufacturing techniques can produce complex, high-value metal parts, with potential applications as critical metal components such as those found in aerospace engines and as customized biomedical implants. Material porosity in these parts is undesirable for aerospace parts - since porosity could lead to premature failure - and desirable for some biomedical implants - since surface-breaking pores allows for better integration with biological tissue. Changes in a part's porosity during an additive manufacturing build may also be an indication of an undesired change in the build process. Here, we present efforts to develop an ultrasonic sensor for monitoring changes in the porosity in metal parts during fabrication on a metal powder bed fusion system. The development of well-characterized reference samples, measurements of the porosity of these samples with multiple techniques, and correlation of ultrasonic measurements with the degree of porosity are presented. A proposed sensor design, measurement strategy, and future experimental plans on a metal powder bed fusion system are also presented.

Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control

PubMed Central

Slotwinski, John A; Garboczi, Edward J; Hebenstreit, Keith M

2014-01-01

Additive manufacturing techniques can produce complex, high-value metal parts, with potential applications as critical metal components such as those found in aerospace engines and as customized biomedical implants. Material porosity in these parts is undesirable for aerospace parts - since porosity could lead to premature failure - and desirable for some biomedical implants - since surface-breaking pores allows for better integration with biological tissue. Changes in a part’s porosity during an additive manufacturing build may also be an indication of an undesired change in the build process. Here, we present efforts to develop an ultrasonic sensor for monitoring changes in the porosity in metal parts during fabrication on a metal powder bed fusion system. The development of well-characterized reference samples, measurements of the porosity of these samples with multiple techniques, and correlation of ultrasonic measurements with the degree of porosity are presented. A proposed sensor design, measurement strategy, and future experimental plans on a metal powder bed fusion system are also presented. PMID:26601041

Additions to the Flora of Cleveland County, Arkansas: Collections From Moro Bottoms Natural Area, A State-Protected Old-Growth Bottomland Hardwood Forest

Treesearch

Danny Skojac; Margaret S. Devall; Bernard R. Parresol

2003-01-01

An annotated list of 38 additions to the vascular flora of Cleveland County, Arkansas is presented. The additions presented were collected from Moro Bottoms Natural Area, a state-protected old-growth bottomland hardwood forest located in the northwest region of the county.

Development and testing of an instrument to measure protective nursing advocacy.

PubMed

Hanks, Robert G

2010-03-01

Patient advocacy is an important aspect of nursing care, yet there are few instruments to measure this essential function. This study was conducted to develop, determine the psychometric properties, and support validity of the Protective Nursing Advocacy Scale (PNAS), which measures nursing advocacy beliefs and actions from a protective perspective. The study used a descriptive correlational design with a systematically selected sample of 419 medical-surgical registered nurses. Analysis of the 43-item instrument was conducted using principal components analysis with promax rotation, which resulted in the items loading onto four components. The four subscales have sufficient internal consistency, as did the overall PNAS. Satisfactory evidence of construct, content, and convergent validity were determined. Implications for nursing practice include using the PNAS in conjunction with an educational program to enhance advocacy skills, which may help to improve patient outcomes.

Household-Level Expenditure on Protective Measures Against Mosquitoes on the Island of La Réunion, France

PubMed Central

Thuilliez, Josselin; Bellia, Claire; Dehecq, Jean-Sébastien; Reilhes, Olivier

2014-01-01

Background For decades La Réunion has experienced a number of epidemics that have resulted in efforts to control the density of Aedes species on this Island. This study was conducted to assess household-level expenditure on protective measures against mosquito nuisance on the Island of La Réunion in 2012. Methodology/Principal Findings Data was collected during a cross-sectional survey of 1024 households and used to determine the relationship between the use of chemically-based protective measures and subjective and objective indicators of the density of Aedes albopictus. The average household expenditure in July 2012 was USD 9.86 and the total household-level expenditure over a one-year period was extrapolated to USD 28.05million (range: USD 25.58 million to USD 30.76 million). Much of this money was spent on measures thought to be relatively ineffective against Aedes mosquitoes. Expenditure on protective measures was not influenced by the level of knowledge on mosquitoes or by the visual nuisance they generated at home, but rather by the perception of risk related to a future epidemic of chikungunya and socioeconomic factors. Most importantly, household spending on protective measures was found to be influenced by a measure of zone-level mosquito density (the Breteau index), but not by objective indicators of the presence of mosquitoes within or around the house. Conclusions/Significance Household-level expenditure on chemically-based protective measures is high when compared to the investment made by public entities to achieve vector control, and it is differentially influenced by subjective and objective measures of mosquito density. The current situation could be improved, firstly by ensuring that the public is well-informed about mosquitoes and the effectiveness of various protective measures, and secondly by implementing interventions that could either complement current vector-control strategies and improve their effectiveness on a country-level, or that

Optimization of coastal protection measures on small islands in the northfrisian part of the North Sea

NASA Astrophysics Data System (ADS)

Wöffler, T.; Jensen, J.; Schüttrumpf, H.

2017-12-01

Low lying small islands are among the most vulnerable regions worldwide due to the consequences of climate change. The reasons for this are the concentration of infrastructure, geographical features and their small size. Worldwide special forms and adaptations of coastal protection strategies and measures can be found on small islands. In the northfrisian part of the North Sea worldwide unique strategies and measures have been developed in the last centuries due to the geographic location and the isolation during extreme events. One special feature of their coastal protection strategy is the lack of dikes. For this reason, the houses are built on artificial dwelling mounds in order to protect the inhabitants and their goods against frequently occurring inundations during storm surge seasons (up to 30 times a year). The Hallig islands themselves benefit by these inundations due to sediments, which are accumulated on the island's surfaces. This sedimentation has enabled a natural adaption to sea level rise in the past. Nevertheless, the construction methods of the coastal protection measures are mainly based on tradition and the knowledge of the inhabitants. No resilient design approaches and safety standards for these special structures like dwelling mounds and elevated revetments exist today. For this reason, neither a cost efficient construction nor a prioritization of measures is possible. Main part of this paper is the scientific investigation of the existing coastal protection measures with the objective of the development of design approaches and safety standards. The results will optimize the construction of the existing coastal protection measures and can be transferred to other small islands and low lying areas worldwide.

Cathodic Protection Measurement Through Inline Inspection Technology Uses and Observations

NASA Astrophysics Data System (ADS)

Ferguson, Briana Ley

This research supports the evaluation of an impressed current cathodic protection (CP) system of a buried coated steel pipeline through alternative technology and methods, via an inline inspection device (ILI, CP ILI tool, or tool), in order to prevent and mitigate external corrosion. This thesis investigates the ability to measure the current density of a pipeline's CP system from inside of a pipeline rather than manually from outside, and then convert that CP ILI tool reading into a pipe-to-soil potential as required by regulations and standards. This was demonstrated through a mathematical model that utilizes applications of Ohm's Law, circuit concepts, and attenuation principles in order to match the results of the ILI sample data by varying parameters of the model (i.e., values for over potential and coating resistivity). This research has not been conducted previously in order to determine if the protected potential range can be achieved with respect to the predicted current density from the CP ILI device. Kirchhoff's method was explored, but certain principals could not be used in the model as manual measurements were required. This research was based on circuit concepts which indirectly affected electrochemical processes. Through Ohm's law, the results show that a constant current density is possible in the protected potential range; therefore, indicates polarization of the pipeline, which leads to calcareous deposit development with respect to electrochemistry. Calcareous deposit is desirable in industry since it increases the resistance of the pipeline coating and lowers current, thus slowing the oxygen diffusion process. This research conveys that an alternative method for CP evaluation from inside of the pipeline is possible where the pipe-to-soil potential can be estimated (as required by regulations) from the ILI tool's current density measurement.

[Light protection: principles of UV protection].

PubMed

Stege, H; Mang, R

2006-05-01

UV radiation is responsible for the induction of epithelial and melanocytic skin cancer, photoaging, and photodermatoses. UV protection is necessary to prevent damage caused by non-physiologic exposure. UV protection includes not only reduction of sun exposure but also use of sun protective filters, UV protective clothes, DNA repair enzymes, and antioxidant supplementation. Consumers are uncertain about the possibilities and limitations of commercial sun protection measures. Dermatologists must explain protective measures to the general public which continues to believe that UV-tanned skin is healthy. The sunscreen market is a highly competitive but lucrative market. The range of products with different designations and promises makes difficult for both consumers and dermatologists to determine what is sensible UV protection.

Experimental procedure for measuring and comparing head-neck-trunk posture and movements caused by different progressive addition lens designs.

PubMed

Mateo, B; Porcar-Seder, R; Solaz, J S; Dürsteler, J C

2010-07-01

This study demonstrates that appropriate measurement procedures can detect differences in head movement in a near reading task when using three different progressive addition lenses (PALs). The movements were measured using an anatomical reference system with a biomechanical rationale. This reference system was capable of representing rotations for comparing head flexion relative to trunk, head flexion relative to neck, head rotation relative to trunk and trunk flexion. The subject sample comprised 31 volunteers and three PAL designs with different viewing zones were selected. Significant differences were found between the lenses for three of the seven movement parameters examined. The differences occurred for both vertical and horizontal head movements and could be attributed to aspects of the PAL design. The measurement of the complete kinematic trunk-neck-head chain improved the number of differences that were found over those in previous studies. STATEMENT OF RELEVANCE: The study proposes a methodology based on a biomechanical rationale able to differentiate head-neck-trunk posture and movements caused by different progressive addition lens designs with minimum invasiveness. This methodology could also be applied to analyse the ergonomics of other devices that restrict the user's field of view, such as helmets, personal protective equipment or helmet-mounted displays for pilots. This analysis will allow designers to optimise designs offering higher comfort and performance.

Measuring financial protection against catastrophic health expenditures: methodological challenges for global monitoring.

PubMed

Hsu, Justine; Flores, Gabriela; Evans, David; Mills, Anne; Hanson, Kara

2018-05-31

Monitoring financial protection against catastrophic health expenditures is important to understand how health financing arrangements in a country protect its population against high costs associated with accessing health services. While catastrophic health expenditures are generally defined to be when household expenditures for health exceed a given threshold of household resources, there is no gold standard with several methods applied to define the threshold and household resources. These different approaches to constructing the indicator might give different pictures of a country's progress towards financial protection. In order for monitoring to effectively provide policy insight, it is critical to understand the sensitivity of measurement to these choices. This paper examines the impact of varying two methodological choices by analysing household expenditure data from a sample of 47 countries. We assess sensitivity of cross-country comparisons to a range of thresholds by testing for restricted dominance. We further assess sensitivity of comparisons to different methods for defining household resources (i.e. total expenditure, non-food expenditure and non-subsistence expenditure) by conducting correlation tests of country rankings. We found country rankings are robust to the choice of threshold in a tenth to a quarter of comparisons within the 5-85% threshold range and this increases to half of comparisons if the threshold is restricted to 5-40%, following those commonly used in the literature. Furthermore, correlations of country rankings using different methods to define household resources were moderate to high; thus, this choice makes less difference from a measurement perspective than from an ethical perspective as different definitions of available household resources reflect varying concerns for equity. Interpreting comparisons from global monitoring based on a single threshold should be done with caution as these may not provide reliable insight into

Impact of using scatter-mimicking beams instead of standard beams to measure penetration when assessing the protective value of radiation-protective garments.

PubMed

Jones, A Kyle; Pasciak, Alexander S; Wagner, Louis K

2018-03-01

Use standardized methods to determine how assessment of protective value of radiation-protective garments changes under conditions employing standard beam qualities, scatter-mimicking primary beams, and a modified H p (10) measurement. The shielding properties of radiation-protective garments depend on the spectrum of beam energies striking the garment and the attenuation properties of materials used to construct the garment, including x-ray fluorescence produced by these materials. In this study the primary beam spectra employed during clinical interventional radiology and cardiology procedures (clinical primary beams, CPB) were identified using radiation dose structured reports (RDSR) and fluoroscope log data. Monte Carlo simulation was used to determine the scattered radiation spectra produced by these CPB during typical clinical application. For these scattered spectra, scatter-mimicking primary beams (SMPB) were determined using numerical optimization-based spectral reconstruction that adjusted kV and filtration to produce the SMPB that optimally matched the scattered spectrum for each CPB. The penetration of a subset of SMPB through four radiation-protective garments of varying compositions and nominal thicknesses was measured using a geometry specified by the International Electrotechnical Commission (IEC). The diagnostic radiological index of protection (DRIP), which increases with increasing penetration through a garment, was calculated using these measurements. Penetration through the same garments was measured for standard beams specified by the American Society of Testing and Materials (ASTM). Finally, 10 mm of PMMA was affixed to the inside of each garment and the DRIP remeasured in this configuration to simulate H p (10). The SMPB based on actual CPB were in general characterized by lower kV (range 60-76) and higher half-value layer (HVL, range 3.44-4.89 mm Al) than standard beam qualities specified by ASTM (kV range 70-85; HVL range 3.4-4.0 mm Al

Food additives

PubMed Central

Spencer, Michael

1974-01-01

Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

Measurement of additional shear during sludge conditioning and dewatering.

PubMed

Ormeci, Banu; Ahmad, Ayaz

2009-07-01

Optimum polymer dose is influenced both by the polymer demand of the sludge and the shear applied during conditioning. Sludge exposed to additional shear following conditioning will experience a decrease in cake solids concentration for the same polymer dose. Therefore, it is necessary to measure or quantify the additional shear in order to optimize the conditioning and dewatering. There is currently no direct or indirect method to achieve this. The main objective of this study was to develop a method based on torque rheology to measure the amount of shear that a sludge network experiences during conditioning and dewatering. Anaerobically digested sludge samples were exposed to increasing levels of mixing intensities and times, and rheological characteristics of samples were measured using a torque rheometer. Several rheological parameters were evaluated including the peak torque and totalized torque (area under the rheograms). The results of this study show that at the optimum polymer dose, a linear relationship exists between the applied shear and the area under the rheograms, and this relationship can be used to estimate an unknown amount of shear that the sludge was exposed to. The method is useful as a research tool to study the effect of shear on dewatering but also as an optimization tool in a dewatering automation system based on torque rheology.

Estimating the Error of an Analog Quantum Simulator by Additional Measurements

NASA Astrophysics Data System (ADS)

Schwenk, Iris; Zanker, Sebastian; Reiner, Jan-Michael; Leppäkangas, Juha; Marthaler, Michael

2017-12-01

We study an analog quantum simulator coupled to a reservoir with a known spectral density. The reservoir perturbs the quantum simulation by causing decoherence. The simulator is used to measure an operator average, which cannot be calculated using any classical means. Since we cannot predict the result, it is difficult to estimate the effect of the environment. Especially, it is difficult to resolve whether the perturbation is small or if the actual result of the simulation is in fact very different from the ideal system we intend to study. Here, we show that in specific systems a measurement of additional correlators can be used to verify the reliability of the quantum simulation. The procedure only requires additional measurements on the quantum simulator itself. We demonstrate the method theoretically in the case of a single spin connected to a bosonic environment.

[Optimizing staff radiation protection in radiology by minimizing the effective dose].

PubMed

von Boetticher, H; Lachmund, J; Hoffmann, W; Luska, G

2006-03-01

In the present study the optimization of radiation protection devices is achieved by minimizing the effective dose of the staff members since the stochastic radiation effects correlate to the effective dose. Radiation exposure dosimetry was performed with TLD measurements using one Alderson Phantom in the patient position and a second phantom in the typical position of the personnel. Various types of protective clothing as well as fixed shields were considered in the calculations. It was shown that the doses of the unshielded organs (thyroid, parts of the active bone marrow) contribute significantly to the effective dose of the staff. Therefore, there is no linear relationship between the shielding factors for protective garments and the effective dose. An additional thyroid protection collar reduces the effective dose by a factor of 1.7 - 3.0. X-ray protective clothing with a 0.35 mm lead equivalent and an additional thyroid protection collar provides better protection against radiation than an apron with a 0.5 mm lead equivalent but no collar. The use of thyroid protection collars is an effective preventive measure against exceeding occupational organ dose limits, and a thyroid shield also considerably reduces the effective dose. Therefore, thyroid protection collars should be a required component of anti-X protection.

Measurements of the solar UVR protection provided by shade structures in New Zealand primary schools.

PubMed

Gies, Peter; Mackay, Christina

2004-01-01

To reduce ultraviolet radiation (UVR) exposure during childhood, shade structures are being erected in primary schools to provide areas where children can more safely undertake outdoor activities. This study to evaluate the effectiveness of existing and purpose built shade structures in providing solar UVR protection was carried out on 29 such structures in 10 schools in New Zealand. Measurements of the direct and scattered solar UVR doses within the central region of the shade structures were made during the school lunch break period using UVR-sensitive polysulfone film badges. These measurements indicate that many of the structures had UVR protection factors (PF) of 4-8, which was sufficient to provide protection during the school lunch hour. However, of the 29 structures examined, only six would meet the suggested requirements of UVR PF greater than 15 required to provide all-day protection.

Additional Nucleophile-Free FeCl3-Catalyzed Green Deprotection of 2,4-Dimethoxyphenylmethyl-Protected Alcohols and Carboxylic Acids.

PubMed

Sawama, Yoshinari; Masuda, Masahiro; Honda, Akie; Yokoyama, Hiroki; Park, Kwihwan; Yasukawa, Naoki; Monguchi, Yasunari; Sajiki, Hironao

2016-01-01

The deprotection of the methoxyphenylmethyl (MPM) ether and ester derivatives can be generally achieved by the combinatorial use of a catalytic Lewis acid and stoichiometric nucleophile. The deprotections of 2,4-dimethoxyphenylmethyl (DMPM)-protected alcohols and carboxylic acids were found to be effectively catalyzed by iron(III) chloride without any additional nucleophile to form the deprotected mother alcohols and carboxylic acids in excellent yields. Since the present deprotection proceeds via the self-assembling mechanism of the 2,4-DMPM protective group itself to give the hardly-soluble resorcinarene derivative as a precipitate, the rigorous purification process by silica-gel column chromatography was unnecessary and the sufficiently-pure alcohols and carboxylic acids were easily obtained in satisfactory yields after simple filtration.

Implementing planetary protection measures on the Mars Science Laboratory.

PubMed

Benardini, James N; La Duc, Myron T; Beaudet, Robert A; Koukol, Robert

2014-01-01

The Mars Science Laboratory (MSL), comprising a cruise stage; an aeroshell; an entry, descent, and landing system; and the radioisotope thermoelectric generator-powered Curiosity rover, made history with its unprecedented sky crane landing on Mars on August 6, 2012. The mission's primary science objective has been to explore the area surrounding Gale Crater and assess its habitability for past life. Because microbial contamination could profoundly impact the integrity of the mission and compliance with international treaty was required, planetary protection measures were implemented on MSL hardware to verify that bioburden levels complied with NASA regulations. By applying the proper antimicrobial countermeasures throughout all phases of assembly, the total bacterial endospore burden of MSL at the time of launch was kept to 2.78×10⁵ spores, well within the required specification of less than 5.0×10⁵ spores. The total spore burden of the exposed surfaces of the landed MSL hardware was 5.64×10⁴, well below the allowed limit of 3.0×10⁵ spores. At the time of launch, the MSL spacecraft was burdened with an average of 22 spores/m², which included both planned landed and planned impacted hardware. Here, we report the results of a campaign to implement and verify planetary protection measures on the MSL flight system.

The use of suction blisters to measure sunscreen protection against UVR-induced DNA damage.

PubMed

Josse, Gwendal; Douki, Thierry; Le Digabel, Jimmy; Gravier, Eleonore; Questel, Emmanuel

2018-02-01

The formation of DNA photoproducts caused by solar UVR exposure needs to be investigated in-vivo and in particular in order to assess sunscreens' level of protection against solar genotoxicity. The study's purposes were: i) to evaluate if the roof of suction blisters is an appropriate sampling method for measuring photoproducts, and ii) to measure in-vivo sunscreen protection against cyclobutane pyrimidine dimers. Skin areas on the interior forearms of eight healthy volunteers were exposed in-vivo to 2 MED of simulated solar radiation (SSR) and to 15 MED on a sunscreen protected area. After irradiation, six suction blisters were induced and the blister roofs were collected. Analysis of SSR-induced CPDs was performed by two independent methods: a chromatography coupled to mass spectroscopy (HPLC-MS/MS) approach and a 3D-imaging of CPD immunostaining by multiphoton microscopy on floating epidermal sheets. HPLC-MS/MS analyses showed that SSR-unexposed skin presented no CPD dimers, whereas 2 MED SSR-exposed skin showed a significant number of TT-CPD. The sunscreen covered skin exposed to 15 MED appeared highly protected from DNA damage, as the amount of CPD-dimers remained below the detection limit. The multiphoton-immunostaining analysis consistently showed that no CPD staining was observed on the non-SSR-exposed skin. A significant increase of CPD staining intensity and number of CPD-positive cells were observed on the 2 MED SSR-exposed skin. Sunscreen protected skin presented a very low staining intensity and the number of CPD-positive cells remained very close to non-SSR-exposed skin. This study showed that suction blister samples are very appropriate for measuring CPD dimers in-vivo, and that sunscreens provide high protection against UVR-induced DNA damage. Copyright © 2017 Elsevier B.V. All rights reserved.

Enabling multi-faceted measures of success for protected area management in Trinidad and Tobago.

PubMed

Granderson, Ainka A

2011-08-01

A key challenge has been to define and measure "success" in managing protected areas. A case study was conducted of efforts to evaluate the new protected area management system in Trinidad and Tobago using a participatory approach. The aim of the case study was to (1) examine whether stakeholder involvement better captures the multi-faceted nature of success and (2) identify the role and influence of various stakeholder groups in this process. An holistic and systematic framework was developed with stakeholder input that facilitated the integration of expert and lay knowledge, a broad emphasis on ecological, socio-economic, and institutional aspects, and the use of both quantitative and qualitative data allowing the evaluation to capture the multi-faceted nature and impacts of protected area management. Input from primary stakeholders, such as local communities, was critical as they have a high stake in protected area outcomes. Secondary and external stakeholders, including government agencies, non-governmental organizations, academia and the private sector, were also important in providing valuable technical assistance and serving as mediators. However, a lack of consensus over priorities, politics, and limited stakeholder capacity and data access pose significant barriers to engaging stakeholders to effectively measure the management success of protected areas. Copyright © 2011 Elsevier Ltd. All rights reserved.

Salmonella Enteritidis with double deletion in phoP fliC and a competitive exclusion culture elicit substantial additive protective effects against Salmonella exposure in newly hatched chicks.

PubMed

Methner, U; Berndt, A; Locke, M

2017-10-27

A live Salmonella Enteritidis vaccine (SE147N ΔphoP fliC), able to express both a homologous intestinal colonisation-inhibition effect and a systemic invasion-inhibition effect, was tested for its potential to generate a postulated additive protective effect in case of combined application with a competitive exclusion (CE) culture against Salmonella exposure in very young chicks. Both, SE147N ΔphoP fliC and the CE culture alone were highly protective against systemic and intestinal colonisation of the challenge strain in case of moderate Salmonella exposure, consequently, additive protective effects in combined use could not be detected. However, in case of high Salmonella Enteritidis challenge with 10 6 cfu/bird at day 3 of life the combination of the ΔphoP fliC vaccine and the CE culture resulted in a protective effect much more pronounced than either of the single preparations and most substantial compared to untreated control birds. The term additive protective effects reflects the recognition that exclusion effects by gut flora cultures and inhibition effects by Salmonella vaccines are caused by different mechanisms. Copyright © 2017 Elsevier Ltd. All rights reserved.

10 CFR 73.60 - Additional requirements for physical protection at nonpower reactors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... nonpower reactors. 73.60 Section 73.60 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION... requirements for physical protection at nonpower reactors. Each nonpower reactor licensee who, pursuant to the... nonpower reactors licensed to operate at or above a power level of 2 megawatts thermal. [38 FR 35430, Dec...

10 CFR 73.60 - Additional requirements for physical protection at nonpower reactors.

Code of Federal Regulations, 2011 CFR

2011-01-01

... nonpower reactors. 73.60 Section 73.60 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION... requirements for physical protection at nonpower reactors. Each nonpower reactor licensee who, pursuant to the... nonpower reactors licensed to operate at or above a power level of 2 megawatts thermal. [38 FR 35430, Dec...

[Evaluation of the efficiency of Angara River water protection measures against pollution by petroleum products].

PubMed

Zabuga, G A; Katul'skiĭ, Iu N; Gorbunova, O V; Storozheva, L N

2011-01-01

The process installations and storage reservoirs of a petroleum refinery have leaks of petroleum products (PP) that pollute soil, underground waters, and eventually nearest water objects, by worsening their hygienic state. Environmental and economic assessments of the Angara River water protection system that is in operation at the petroleum refinery OAO "Angara Petroleum Company", which comprises well clusters, a gravel-filled trench, and a drainage system, have shown the high values of preventable relative natural and economic damages and other economic indicators. At the same time, comparison of the amount of PPs accumulated at the industrial site with their annual withdrawal has demonstrated a need for further development of a river protection system. Therefore the environmental protection system efficacy evaluated by the quality of goal attainment and by means of a matrix of algorithmized statements was 60% or 5 of 20 scores, which shows the necessity of special measures to protect Angara River waters. The elaboration and implementation of these measures associated with considerable expenditures make it possible not only to increase the environmental efficiency of water protection of the Angara River, but also to do the hygienic quality of water use in its related localities.

40 CFR 79.31 - Additives.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Additives. 79.31 Section 79.31... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives... persons or property on a street or highway. For purposes of this registration, however, additives...

40 CFR 79.31 - Additives.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Additives. 79.31 Section 79.31... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives... persons or property on a street or highway. For purposes of this registration, however, additives...

40 CFR 79.31 - Additives.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Additives. 79.31 Section 79.31... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives... persons or property on a street or highway. For purposes of this registration, however, additives...

40 CFR 79.31 - Additives.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Additives. 79.31 Section 79.31... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives... persons or property on a street or highway. For purposes of this registration, however, additives...

40 CFR 79.31 - Additives.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Additives. 79.31 Section 79.31... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives... persons or property on a street or highway. For purposes of this registration, however, additives...

Measuring impact of protected area management interventions: current and future use of the Global Database of Protected Area Management Effectiveness

PubMed Central

Coad, Lauren; Leverington, Fiona; Knights, Kathryn; Geldmann, Jonas; Eassom, April; Kapos, Valerie; Kingston, Naomi; de Lima, Marcelo; Zamora, Camilo; Cuardros, Ivon; Nolte, Christoph; Burgess, Neil D.; Hockings, Marc

2015-01-01

Protected areas (PAs) are at the forefront of conservation efforts, and yet despite considerable progress towards the global target of having 17% of the world's land area within protected areas by 2020, biodiversity continues to decline. The discrepancy between increasing PA coverage and negative biodiversity trends has resulted in renewed efforts to enhance PA effectiveness. The global conservation community has conducted thousands of assessments of protected area management effectiveness (PAME), and interest in the use of these data to help measure the conservation impact of PA management interventions is high. Here, we summarize the status of PAME assessment, review the published evidence for a link between PAME assessment results and the conservation impacts of PAs, and discuss the limitations and future use of PAME data in measuring the impact of PA management interventions on conservation outcomes. We conclude that PAME data, while designed as a tool for local adaptive management, may also help to provide insights into the impact of PA management interventions from the local-to-global scale. However, the subjective and ordinal characteristics of the data present significant limitations for their application in rigorous scientific impact evaluations, a problem that should be recognized and mitigated where possible. PMID:26460133

Hyperoxic preconditioning fails to confer additional protection against ischemia-reperfusion injury in acute diabetic rat heart.

PubMed

Pourkhalili, Khalil; Hajizadeh, Sohrab; Akbari, Zahra; Dehaj, Mansour Esmaili; Akbarzadeh, Samad; Alizadeh, Alimohammad

2012-01-01

Experimental studies show that detrimental effects of ischemia-reperfusion (I/R) injury can be attenuated by hyperoxic preconditioning in normal hearts, however, there are few studies about hyperoxia effects in diseased myocardium. The present study was designed to assess the cardioprotective effects of hyperoxia pretreatment (≥ 95 % O2) in acute diabetic rat hearts. Normal and one week acute diabetic rats were either exposed to 60 (H60) and 180 (H180) min of hyperoxia or exposed to normal atmospheric air (21 % O2). Then hearts were isolated immediately and subjected to 30 min of regional ischemia followed by 120 min of reperfusion. Infarct size, cardiomyocyte apoptosis, enzymes release and ischemia induced arrhythmias were determined. Heart of diabetic control rats had less infarct size and decreased LDH and CK-MB release compared to normal hearts. 60 and 180 min of hyperoxia reduced myocardial infarct size and enzymes release in normal hearts. 180 min of hyperoxia also decreased cardiomyocytes apoptosis in normal state. On the other hand, protective values of hyperoxia were not significantly different in diabetic hearts. Moreover, hyperoxia reduced severity of ventricular arrhythmias in normal rat hearts whereas; it did not confer any additional antiarrhythmic protection in diabetic hearts. These findings suggest that diabetic hearts are less susceptible to ischemia-induced arrhythmias and infarction. Hyperoxia greatly protects rat hearts against I/R injury in normal hearts, however, it could not provide added cardioprotective effects in acute phase of diabetes.

[Personal protection measures against blood-sucking insects and ticks].

PubMed

Orshan, Laor; Wilamowski, Amos; Pener, Hedva

2010-09-01

Blood-sucking arthropods are major vectors of various pathogens like viruses, bacteria, protozoa and nematodes. Preventing exposure to the vector is imperative especially when vaccine and prophylactic treatments are not available. Personal protection measures (PPM) are essential and often the only means available when dealing with blood-sucking disease transmitting arthropods. Awareness of the risk in the specific areas of travel is the first step to be taken before and while traveling. PPM include preventive personal behavior, suitable clothing, application of insect repellents to the skin, the use of space repellents, impregnation of clothing, camping gear and bed nets and, when necessary, ground spraying of insecticides. The registered and recommended active ingredients for skin application are Deet, picaridin (icaridin), p-menthane-3,8-diol (PMD) and IR3535. Volatile pyrethrins are used as space repellents while pyrethroids, especially permethrin, are employed for impregnation and for ground spraying. It is recommended to purchase only products registered in Israel or other developed countries. These products should have a detailed label specifying the concentration of the active ingredient, application instructions and the duration of protection.

Comparison of three techniques in measuring progressive addition lenses.

PubMed

Huang, Ching-Yao; Raasch, Thomas W; Yi, Allen Y; Sheedy, James E; Andre, Brett; Bullimore, Mark A

2012-11-01

To measure progressive addition lenses (PALs) by three techniques and to compare the differences across techniques. Five contemporary PALs (Varilux Comfort Enhanced, Varilux Physio Enhanced, Hoya Lifestyle, Shamir Autograph, and Zeiss individual) with plano distance power and a +2.00 diopters (D) add were evaluated under the condition of lateral displacement of the lens (no rotation and no tilt) using three methods. A Hartmann-Shack wavefront sensor (HSWFS) on a custom-built optical bench was used to capture and measure wavefront aberrations. A Rotlex Class Plus lens analyzer operating as a moiré interferometer was used to measure spherical and cylindrical powers. A coordinate measuring machine (CMM) was used to measure front and back surfaces of PALs and converted to desired optical properties. The data were analyzed with MATLAB programs. Contour plots of spherical equivalent power, cylindrical power, and higher-order aberrations (HOAs) in all PALs were generated to compare their differences. The differences in spherical equivalent and cylinder at distance, near, and progressive corridor areas among the HSWFS, Rotlex, and CMM methods were close to zero in all five PALs. The maximum differences are approximately 0.50 D and located below the near power zone and the edge areas of the lens when comparing the HSWFS and CMM with the Rotlex. HOAs measured both by the HSWFS and CMM were highest in the corridor area and the area surrounding the near zone in all PALs. The HOAs measured by the CMM were lower than those from the HSWFS by 0.02 to 0.04 μm. The three measurement methods are comparable for measuring spherical and cylindrical power across PALs. The non-optical method, CMM, can be used to evaluate the optical properties of a PAL by measuring front and back surface height measurements, although its estimates of HOAs are lower than those from the HSWFS.

40 CFR 79.24 - Termination of registration of additives.

Code of Federal Regulations, 2014 CFR

2014-07-01

... additives. 79.24 Section 79.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.24 Termination of registration of additives. Registration may be terminated by the Administrator if the additive...

40 CFR 79.24 - Termination of registration of additives.

Code of Federal Regulations, 2010 CFR

2010-07-01

... additives. 79.24 Section 79.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.24 Termination of registration of additives. Registration may be terminated by the Administrator if the additive...

40 CFR 79.24 - Termination of registration of additives.

Code of Federal Regulations, 2012 CFR

2012-07-01

... additives. 79.24 Section 79.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.24 Termination of registration of additives. Registration may be terminated by the Administrator if the additive...

40 CFR 79.24 - Termination of registration of additives.

Code of Federal Regulations, 2013 CFR

2013-07-01

... additives. 79.24 Section 79.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.24 Termination of registration of additives. Registration may be terminated by the Administrator if the additive...

40 CFR 79.24 - Termination of registration of additives.

Code of Federal Regulations, 2011 CFR

2011-07-01

... additives. 79.24 Section 79.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.24 Termination of registration of additives. Registration may be terminated by the Administrator if the additive...

Cryogenic filters for RFI protection

NASA Technical Reports Server (NTRS)

Bautista, J. J.; Petty, S. M.

1981-01-01

The increased bandwidth and sensitivity of the DSN maser-based receiver systems along with the increase in worldwide microwave spectrum usage dictated the need for employing additional measures to protect these systems from RFI (radio frequency inerference). Both in-band and out-of-band microwave signals at the input of the Deep Space Network (DSN) traveling wave masers (TWM) can adversely affect the maser performance in a variety of ways. Filters fabricated from superconducting materials operating below their superconducting transition temperature (Tc) possess the most potential for providing the necessary RFI protection without degrading the system performance.

76 FR 2027 - Fisheries of the Exclusive Economic Zone Off Alaska; Steller Sea Lion Protection Measures for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

.... 101006495-0498-01] RIN 0648-BA31 Fisheries of the Exclusive Economic Zone Off Alaska; Steller Sea Lion Protection Measures for the Bering Sea and Aleutian Islands Groundfish Fisheries Off Alaska AGENCY: National... 13, 2010, to implement Steller sea lion protection measures to ensure that the Bering Sea and...

75 FR 77535 - Fisheries of the Exclusive Economic Zone Off Alaska; Steller Sea Lion Protection Measures for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-13

.... 101006495-0498-01] RIN 0648-BA31 Fisheries of the Exclusive Economic Zone Off Alaska; Steller Sea Lion Protection Measures for the Bering Sea and Aleutian Islands Groundfish Fisheries Off Alaska AGENCY: National... sea lion protection measures to insure that the Bering Sea and Aleutian Islands management area (BSAI...

Calibration-free absolute frequency response measurement of directly modulated lasers based on additional modulation.

PubMed

Zhang, Shangjian; Zou, Xinhai; Wang, Heng; Zhang, Yali; Lu, Rongguo; Liu, Yong

2015-10-15

A calibration-free electrical method is proposed for measuring the absolute frequency response of directly modulated semiconductor lasers based on additional modulation. The method achieves the electrical domain measurement of the modulation index of directly modulated lasers without the need for correcting the responsivity fluctuation in the photodetection. Moreover, it doubles measuring frequency range by setting a specific frequency relationship between the direct and additional modulation. Both the absolute and relative frequency response of semiconductor lasers are experimentally measured from the electrical spectrum of the twice-modulated optical signal, and the measured results are compared to those obtained with conventional methods to check the consistency. The proposed method provides calibration-free and accurate measurement for high-speed semiconductor lasers with high-resolution electrical spectrum analysis.

Nanoparticle usage and protection measures in the manufacturing industry--a representative survey.

PubMed

Schmid, Kaspar; Danuser, Brigitta; Riediker, Michael

2010-04-01

Addressing the risks of nanoparticles requires knowledge about release into the environment and occupational exposure. However, such information currently is not systematically collected; therefore, this risk assessment lacks quantitative data. The goal was to evaluate the current level of nanoparticle usage in Swiss industry as well as health, safety, and environmental measures, and the number of potentially exposed workers. A representative, stratified mail survey was conducted among 1626 clients of the Swiss National Accident Insurance Fund (SUVA), which insures 80,000 manufacturing firms, representing 84% of all Swiss manufacturing companies (947 companies answered the survey for a 58.3% response rate). The extrapolation to all Swiss manufacturing companies results in 1309 workers (95% confidence interval [CI]: 1073 to 1545) potentially exposed to nanoparticles in 586 companies (95% CI: 145 to 1027). This corresponds to 0.08% of workers (95% CI: 0.06% to 0.09%) and to 0.6% of companies (95% CI: 0.2% to 1.1%). The industrial chemistry sector showed the highest percentage of companies using nanoparticles (21.2%). Other important sectors also reported nanoparticles. Personal protection equipment was the predominant protection strategy. Only a few applied specific environmental protection measures. This is the first nationwide representative study on nanoparticle use in the manufacturing sector. The information gained can be used for quantitative risk assessment. It can also help policymakers design strategies to support companies developing a safer use of nanomaterial. Noting the current low use of nanoparticles, there is still time to proactively introduce protective methods. If the predicted "nano-revolution" comes true, now is the time to take action.

Occupational UVR skin protection by make-up.

PubMed

Bonner, R; Khazova, M; O'Hagan, J B; Squire, H

2012-03-01

New legislation has been introduced in the Member States of the European Union, covering worker exposure to artificial optical radiation. Use of make-up could reduce the ultraviolet hazard level and provide additional protection for skin against UV radiation (UVR). This is particularly important in entertainment and filming where intentional exposure of the actors and presenters to the very intense light sources may be required for extended periods of time. This document presents the assessment of UVR protection of make-up used in entertainment and demonstrates that the protection level varies considerably for different luminaires and application techniques. An important practical implication of this finding is that make-up alone cannot be considered as a reliable protection measure against skin exposure to actinic UV.

Studies on some feed additives and materials giving partial protection against the suppressive effect of ochratoxin A on egg production of laying hens.

PubMed

Stoev, Stoycho D

2010-06-01

The protective effects of various feed supplements against the harmful effect of ochratoxin A on egg production and sexual maturation of two-weeks old Plymouth Rock female chicks designed for laying hens were studied. A significant protective effect of the feed additives or materials: water extract of artichoke (WEA), sesame seed (SS), Roxazyme-G (RG) and l-beta phenylalanine (PHE) against the suppressive effect of ochratoxin A (OTA) on egg production of laying hens was found. A similar protection was also seen on the toxic effect of OTA on various internal organs of the same hens. A significant protection was found against the decrease of the weight or the quantity of eggs as well as against the delay of the beginning of the laying period of chicks, both of which were provoked by ochratoxin A. These protective effects were strongest in chicks treated with SS or WEA, but were slightest in chicks treated with l-beta PHE. Copyright 2009 Elsevier Ltd. All rights reserved.

Dynamics and protection of tripartite quantum correlations in a thermal bath

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Jin-Liang, E-mail: guojinliang80@163.com; Wei, Jin-Long

2015-03-15

We study the dynamics and protection of tripartite quantum correlations in terms of genuinely tripartite concurrence, lower bound of concurrence and tripartite geometric quantum discord in a three-qubit system interacting with independent thermal bath. By comparing the dynamics of entanglement with that of quantum discord for initial GHZ state and W state, we find that W state is more robust than GHZ state, and quantum discord performs better than entanglement against the decoherence induced by the thermal bath. When the bath temperature is low, for the initial GHZ state, combining weak measurement and measurement reversal is necessary for a successfulmore » protection of quantum correlations. But for the initial W state, the protection depends solely upon the measurement reversal. In addition, the protection cannot usually be realized irrespective of the initial states as the bath temperature increases.« less

Measuring protection of aromatic wine thiols from oxidation by competitive reactions vs wine preservatives with ortho-quinones.

PubMed

Nikolantonaki, Maria; Magiatis, Prokopios; Waterhouse, Andrew L

2014-11-15

Quinones are central intermediates in wine oxidation that can degrade the quality of wine by reactions with varietal thiols, such as 3-sulfanylhexanol, decreasing desirable aroma. Protection by wine preservatives (sulphur dioxide, glutathione, ascorbic acid and model tannin, phloroglucinol) was assessed by competitive sacrificial reactions with 4-methyl-1,2-benzoquinone, quantifying products and ratios by HPLC-UV-MS. Regioselectivity was assessed by product isolation and identification by NMR spectroscopy. Nucleophilic addition reactions compete with two electron reduction of quinones by sulphur dioxide or ascorbic acid, and both routes serve as effective quenching pathways, but minor secondary products from coupled redox reactions between the products and reactants are also observed. The wine preservatives were all highly reactive and thus all very protective against 3-sulfanylhexanol loss to the quinone, but showed only additive antioxidant effects. Confirmation of these reaction rates and pathways in wine is needed to assess the actual protective action of each tested preservative. Copyright © 2014 Elsevier Ltd. All rights reserved.

77 FR 64531 - Notice of Availability of Guidance for Protecting Responders' Health During the First Week...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-22

... the first week of a response. Protective measures addressed in the guidance include medical countermeasures (i.e., drugs, vaccine), personal protective equipment (PPE), and other possible work practices. A...), including more specificity regarding the use of personal protective equipment (PPE). In addition, a number...

Evaluation of TcpF-A2-CTB Chimera and Evidence of Additive Protective Efficacy of Immunizing with TcpF and CTB in the Suckling Mouse Model of Cholera

PubMed Central

Price, Gregory A.; Holmes, Randall K.

2012-01-01

The secreted colonization factor, TcpF, which is produced by Vibrio cholerae 01 and 0139, has generated interest as a potential protective antigen in the development of a subunit vaccine against cholera. This study evaluated immunogenicity/protective efficacy of a TcpF holotoxin-like chimera (TcpF-A2-CTB) following intraperitoneal immunization compared to TcpF alone, a TcpF+CTB mixture, or CTB alone. Immunization with the TcpF-A2-CTB chimera elicited significantly greater amounts of anti-TcpF IgG than immunization with the other antigens (P<0.05). Protective efficacy was measured using 6-day-old pups reared from immunized dams and orogastrically challenged with a lethal dose of El Tor V. cholerae 01 Inaba strain N16961. Protection from death, and weight loss analysis at 24 and 48 hours post-infection demonstrated that immunization with TcpF alone was poorly protective. However, immunization with TcpF+CTB was highly protective and showed a trend toward greater protection than immunization with CTB alone (82% vs 64% survival). Immunization with the TcpF-A2-CTB chimera demonstrated less protection (50% survival) than immunization with the TcpF+CTB mixture. The TcpF-A2-CTB chimera used for this study contained the heterologous classical CTB variant whereas the El Tor CTB variant (expressed by the challenge strain) was used in the other immunization groups. For all immunization groups that received CTB, quantitative ELISA data demonstrated that the amounts of serum IgG directed against the homologous immunizing CTB antigen was statistically greater than the amount to the heterologous CTB antigen (P≤0.003). This finding provides a likely explanation for the poorer protection observed following immunization with the TcpF-A2-CTB chimera and the relatively high level of protection seen after immunization with homologous CTB alone. Though immunization with TcpF alone provided no protection, the additive protective effect when TcpF was combined with CTB demonstrates its

On Bayesian Testing of Additive Conjoint Measurement Axioms Using Synthetic Likelihood

ERIC Educational Resources Information Center

Karabatsos, George

2017-01-01

This article introduces a Bayesian method for testing the axioms of additive conjoint measurement. The method is based on an importance sampling algorithm that performs likelihood-free, approximate Bayesian inference using a synthetic likelihood to overcome the analytical intractability of this testing problem. This new method improves upon…

Human milk inactivates pathogens individually, additively, and synergistically.

PubMed

Isaacs, Charles E

2005-05-01

Breast-feeding can reduce the incidence and the severity of gastrointestinal and respiratory infections in the suckling neonate by providing additional protective factors to the infant's mucosal surfaces. Human milk provides protection against a broad array of infectious agents through redundancy. Protective factors in milk can target multiple early steps in pathogen replication and target each step with more than one antimicrobial compound. The antimicrobial activity in human milk results from protective factors working not only individually but also additively and synergistically. Lipid-dependent antimicrobial activity in milk results from the additive activity of all antimicrobial lipids and not necessarily the concentration of one particular lipid. Antimicrobial milk lipids and peptides can work synergistically to decrease both the concentrations of individual compounds required for protection and, as importantly, greatly reduce the time needed for pathogen inactivation. The more rapidly pathogens are inactivated the less likely they are to establish an infection. The total antimicrobial protection provided by human milk appears to be far more than can be elucidated by examining protective factors individually.

Bacteria-eating virus approved as food additive.

PubMed

Bren, Linda

2007-01-01

Not all viruses harm people. The Food and Drug Administration has approved a mixture of viruses as a food additive to protect people. The additive can be used in processing plants for spraying onto ready-to-eat meat and poultry products to protect consumers from the potentially life-threatening bacterium Listeria monocytogenes (L. monocytogenes).

[A case of human infection with highly pathogenic avian influenza A (H7N9) virus through poultry processing without protection measure].

PubMed

Ma, Y; Zhang, Z B; Cao, L; Lu, J Y; Li, K B; Su, W Z; Li, T G; Yang, Z C; Wang, M

2018-06-10

Objective: To investigate the infection pattern and etiological characteristics of a case of human infection with highly pathogenic avian influenza A (H7N9) virus and provide evidence for the prevention and control of human infection with highly pathogenic avian influenza virus. Methods: Epidemiological investigation was conducted to explore the case's exposure history, infection route and disease progression. Samples collected from the patient, environments and poultry were tested by using real time reverse transcriptase-polymerase chain reaction (RT-PCR). Virus isolation, genome sequencing and phylogenetic analysis were conducted for positive samples. Results: The case had no live poultry contact history, but had a history of pulled chicken processing without taking protection measure in an unventilated kitchen before the onset. Samples collected from the patient's lower respiratory tract, the remaining frozen chicken meat and the live poultry market were all influenza A (H7N9) virus positive. The isolated viruses from these positive samples were highly homogenous. An insertion which lead to the addition of multiple basic amino acid residues (PEVPKRKRTAR/GL) was found at the HA cleavage site, suggesting that this virus might be highly pathogenic. Conclusions: Live poultry processing without protection measure is an important infection mode of "poultry to human" transmission of avian influenza viruses. Due to the limitation of protection measures in live poultry markets in Guangzhou, it is necessary to promote the standardized large scale poultry farming, the complete restriction of live poultry sales and centralized poultry slaughtering as well as ice fresh sale.

40 CFR 79.20 - Application for registration by additive manufacturer.

Code of Federal Regulations, 2011 CFR

2011-07-01

... additive manufacturer. 79.20 Section 79.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.20 Application for registration by additive manufacturer. Any manufacturer of a designated...

40 CFR 79.20 - Application for registration by additive manufacturer.

Code of Federal Regulations, 2010 CFR

2010-07-01

... additive manufacturer. 79.20 Section 79.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.20 Application for registration by additive manufacturer. Any manufacturer of a designated...

40 CFR 79.20 - Application for registration by additive manufacturer.

Code of Federal Regulations, 2014 CFR

2014-07-01

... additive manufacturer. 79.20 Section 79.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.20 Application for registration by additive manufacturer. Any manufacturer of a designated...

40 CFR 79.20 - Application for registration by additive manufacturer.

Code of Federal Regulations, 2012 CFR

2012-07-01

... additive manufacturer. 79.20 Section 79.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.20 Application for registration by additive manufacturer. Any manufacturer of a designated...

40 CFR 79.20 - Application for registration by additive manufacturer.

Code of Federal Regulations, 2013 CFR

2013-07-01

... additive manufacturer. 79.20 Section 79.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.20 Application for registration by additive manufacturer. Any manufacturer of a designated...

Hepatitis B virus vaccination booster does not provide additional protection in adolescents: a cross-sectional school-based study.

PubMed

Chang, Yung-Chieh; Wang, Jen-Hung; Chen, Yu-Sheng; Lin, Jun-Song; Cheng, Ching-Feng; Chu, Chia-Hsiang

2014-09-23

Current consensus does not support the use of a universal booster of hepatitis B virus (HBV) vaccine because there is an anamnestic response in almost all children 15 years after universal infant HBV vaccination. We aimed to provide a booster strategy among adolescents as a result of their changes in lifestyle and sexual activity. This study comprised a series of cross-sectional serological surveys of HBV markers in four age groups between 2004 and 2012. The seropositivity rates of hepatitis B surface antigen (HBsAg) and its reciprocal antibody (anti-HBs) for each age group were collected. There were two parts to this study; age-specific HBV seroepidemiology and subgroup analysis, including effects of different vaccine types, booster response for immunogenicity at 15 years of age, and longitudinal follow-up to identify possible additional protection by HBV booster. Within the study period, data on serum anti-HBs and HBsAg in a total of 6950 students from four age groups were collected. The overall anti-HBs and HBsAg seropositivity rates were 44.3% and 1.2%, respectively. The anti-HBs seropositivity rate in the plasma-derived subgroup was significantly higher in both 15- and 18-year age groups. Overall response rate in the double-seronegative recipients at 15 years of age was 92.5% at 6 weeks following one recombinant HBV booster dose. Among the 24 recipients showing anti-HBs seroconversion at 6 weeks after booster, seven subjects (29.2%) had lost their anti-HBs seropositivity again within 3 years. Increased seropositivity rates and titers of anti-HBs did not provide additional protective effects among subjects comprehensively vaccinated against HBV in infancy. HBV booster strategy at 15 years of age was the main contributor to the unique age-related phenomenon of anti-HBs seropositivity rate and titer. No increase in HBsAg seropositivity rates within different age groups was observed. Vaccination with plasma-derived HBV vaccines in infancy provided higher

77 FR 13009 - Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 80 [EPA-HQ-OAR-2011-0542; FRL-9642-3] RIN 2060-AR07 Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel Pathways Under... of Sec. 80.1426 to identify additional renewable fuel production pathways and pathway components that...

Predicting sun protection behaviors using protection motivation variables.

PubMed

Ch'ng, Joanne W M; Glendon, A Ian

2014-04-01

Protection motivation theory components were used to predict sun protection behaviors (SPBs) using four outcome measures: typical reported behaviors, previous reported behaviors, current sunscreen use as determined by interview, and current observed behaviors (clothing worn) to control for common method bias. Sampled from two SE Queensland public beaches during summer, 199 participants aged 18-29 years completed a questionnaire measuring perceived severity, perceived vulnerability, response efficacy, response costs, and protection motivation (PM). Personal perceived risk (similar to threat appraisal) and response likelihood (similar to coping appraisal) were derived from their respective PM components. Protection motivation predicted all four SPB criterion variables. Personal perceived risk and response likelihood predicted protection motivation. Protection motivation completely mediated the effect of response likelihood on all four criterion variables. Alternative models are considered. Strengths and limitations of the study are outlined and suggestions made for future research.

Symmetry-protected topological phases with uniform computational power in one dimension

NASA Astrophysics Data System (ADS)

Raussendorf, Robert; Wang, Dong-Sheng; Prakash, Abhishodh; Wei, Tzu-Chieh; Stephen, David T.

2017-07-01

We investigate the usefulness of ground states of quantum spin chains with symmetry-protected topological order (SPTO) for measurement-based quantum computation. We show that, in spatial dimension 1, if an SPTO phase protects the identity gate, then, subject to an additional symmetry condition that is satisfied in all cases so far investigated, it can also be used for quantum computation.

The role of protected area wetlands in waterfowl habitat conservation: implications for protected area network design

USGS Publications Warehouse

Beatty, William S.; Kesler, Dylan C.; Webb, Elisabeth B.; Raedeke, Andrew H.; Naylor, Luke W.; Humburg, Dale D.

2014-01-01

The principal goal of protected area networks is biodiversity preservation, but efficacy of such networks is directly linked to animal movement within and outside area boundaries. We examined wetland selection patterns of mallards (Anas platyrhynchos) during non-breeding periods from 2010 to 2012 to evaluate the utility of protected areas to migratory waterfowl in North America. We tracked 33 adult females using global positioning system (GPS) satellite transmitters and implemented a use-availability resource selection design to examine mallard use of wetlands under varying degrees of protection. Specifically, we examined effects of proximities to National Wildlife Refuges, private land, state wildlife management areas, Wetland Reserve Program easements (WRP), and waterfowl sanctuaries on mallard wetland selection. In addition, we included landscape-level variables that measured areas of sanctuary and WRP within the surrounding landscape of each used and available wetland. We developed 8 wetland selection models according to season (autumn migration, winter, spring migration), hunting season (present, absent), and time period (diurnal, nocturnal). Model averaged parameter estimates indicated wetland selection patterns varied across seasons and time periods, but ducks consistently selected wetlands with greater areas of sanctuary and WRP in the surrounding landscape. Consequently, WRP has the potential to supplement protected area networks in the midcontinent region. Additionally, seasonal variation in wetland selection patterns indicated considering the effects of habitat management and anthropogenic disturbances on migratory waterfowl during the non-breeding period is essential in designing protected area networks.

[Child protection measures in other countries].

PubMed

Hurni, L

1980-06-01

The goal of measures for the protection of children is to help parents to behave toward their children in physically and psychologically nonviolent ways. In this article, a distinction is made between organisations devoted to field work and those devoted to public education. Examples are given from the Netherlands, England, the United States, and the Federal Republic of Germany. The care of families at risk is often in the hands of persons having already friendly contacts with the family. This type of lay helpers receive special training, and it seems that they gain more easily access to the parents than public agencies. In several countries there are interdisciplinary therapeutic centres where children, youth, or entire families find temporary acceptance. Therapy of this type aims primarily at providing an experience of nonviolent human interaction. In public education, the accent is on information of the public. A predominant aim is a change of attitude toward violent parents, in the sense of help being more important than punishment. In most instances, there is also a need to better make known the helping organizations. Finally, some postulates for primary prevention of cruelty to children are summarized, and reference is made to the "Fourth World Movement".

Suicidal behaviours in adolescents in Nova Scotia, Canada: protective associations with measures of social capital.

PubMed

Langille, Donald B; Asbridge, Mark; Kisely, Steve; Rasic, Daniel

2012-10-01

Few studies of adolescent suicidality have examined its associations with social capital. We explored associations of measures of individual level social capital with self-reported suicide ideation and suicide attempt in adolescents in Cape Breton, Nova Scotia, Canada, controlling for other factors known to be associated with adolescent suicidality. We surveyed 1,597 grade 10-12 students at three high schools in 2006 using self-completion questionnaires. Both sexes were combined for analysis. Outcome measures were suicidal ideation and attempt in the previous year. Measures of social capital included perceptions of trustworthiness and helpfulness of others at school, frequency of religious attendance and participation in extracurricular activities. Logistic regressions were carried out to determine associations of social capital with suicidality while controlling for other factors. Perceived trustworthiness and helpfulness were protective for suicidal ideation and suicide attempt in the previous year. In adjusted analyses, there were interactions of gender and social capital-females reporting more social capital were more protected from suicide attempt relative to males with similar levels of social capital. This study provides initial evidence of protective associations of individual level social capital with adolescent suicidality. Our findings suggest that among adolescents low social capital as measured by perceptions of trust and helpfulness of others at school may be a warning sign for suicidality, particularly for females. It may be helpful to inquire of young people how they perceive the trustworthiness and helpfulness of their school environment as a measure of how supportive that environment might be to them when they are facing challenges to their mental health.

Repellents and acaricides as personal protection measures in the prevention of tick-borne diseases.

PubMed

Cisak, Ewa; Wójcik-Fatla, Angelina; Zając, Violetta; Dutkiewicz, Jacek

2012-01-01

A number of preventive measures for the protection of humans against tick-borne diseases were evaluated. Measures involving the avoidance of tick bites with the use of protective clothing and insect repellents are the simplest and most effective. Repellents are applied directly to the skin or clothing and other fabrics, such as bednets, tents and anti-mosquito screens. Currently, DEET (N,N-diethyl-m-toluamide) is considered the most efficient arthropod repellent reference substance. The registered and recommended active repellent ingredients for skin and/or cloths application, among others, are: DEET, 1-methyl-propyl-2- (hydroxyethyl)-1-piperidinecarboxylate (picaridin), p-menthane-3,8-diol (PMD), ethyl butylactyloaminopropionate ( IR3535), 1S,2S-2-methylpiperidinyl-3-cyclohexene-1-carboxamide (SS220), racemic 2-methylpiperidinyl-3-cyclohexene-1-carboxamide (AI3-37220) and synthethic pyrethroid - 3-phenoxybenzyl-cis-trans-3(2,2 dichlorovinyl)-2,2-dimethylcyclopropancarboxylate (permethrin) - an acaricide with repellent properties. To achieve the protection from tick bites by avoiding attachment and/or engorgement by the arthropod, acaricides with repellent properties, such as synthetic pyrethroid-permethrin are used. This pyrethroid is an acaricide of choice used for clothing impregnation, which is effective for personal protection against all three parasitic stages of western black-legged ticks. Products based on natural compounds, e.g. eugenol from Ocimum basilicum, 2-undecanone originally derived from wild tomato, geraniol - a natural product extracted from plants, and many others, represent an interesting alternative to common synthetic repellents and/or acaricides.

Safety Analysis and Protection Measures of the Control System of the Pulsed High Magnetic Field Facility in WHMFC

NASA Astrophysics Data System (ADS)

Shi, J. T.; Han, X. T.; Xie, J. F.; Yao, L.; Huang, L. T.; Li, L.

2013-03-01

A Pulsed High Magnetic Field Facility (PHMFF) has been established in Wuhan National High Magnetic Field Center (WHMFC) and various protection measures are applied in its control system. In order to improve the reliability and robustness of the control system, the safety analysis of the PHMFF is carried out based on Fault Tree Analysis (FTA) technique. The function and realization of 5 protection systems, which include sequence experiment operation system, safety assistant system, emergency stop system, fault detecting and processing system and accident isolating protection system, are given. The tests and operation indicate that these measures improve the safety of the facility and ensure the safety of people.

Relationships of protective factors to stress and symptoms of illness.

PubMed

Dolbier, Christyn L; Smith, Shanna E; Steinhardt, Mary A

2007-01-01

To examine relationships of work and individual protective factors to health outcomes. Participants from 2 corporate samples completed measures of supervisor support, hardiness, coping, global stress, and symptoms of illness. Regression analyses indicated that higher scores on hardiness and approach coping and being male predicted lower scores on stress and symptoms of illness. Additionally, supervisor support predicted fewer symptoms of illness but did not have a spillover effect onto stress. Interventions that enhance individual protective factors primarily and work protective factors secondarily may be most effective in reducing stress and illness among employees.

Measuring lifetime stress exposure and protective factors in life course research on racial inequality and birth outcomes.

PubMed

Malat, Jennifer; Jacquez, Farrah; Slavich, George M

2017-07-01

There has been a long-standing interest in better understanding how social factors contribute to racial disparities in health, including birth outcomes. A recent emphasis in this context has been on identifying the effects of stress exposure and protective factors experienced over the entire lifetime. Yet despite repeated calls for a life course approach to research on this topic, very few studies have actually assessed how stressors and protective factors occurring over women's lives relate to birth outcomes. We discuss this issue here by describing how challenges in the measurement of lifetime stress exposure and protective factors have prevented researchers from developing an empirically-based life course perspective on health. First, we summarize prevailing views on racial inequality and birth outcomes; second, we discuss measurement challenges that exist in this context; and finally, we describe both new tools and needed tools for assessing lifetime stress exposure and suggest opportunities for integrating information on stress exposure and psychosocial protective factors. We conclude that more studies are needed that integrate information about lifetime stress exposures and the protective factors that promote resilience against such exposures to inform policy and practice recommendations to reduce racial disparities in birth outcomes.

Comparison of progressive addition lenses by direct measurement of surface shape.

PubMed

Huang, Ching-Yao; Raasch, Thomas W; Yi, Allen Y; Bullimore, Mark A

2013-06-01

To compare the optical properties of five state-of-the-art progressive addition lenses (PALs) by direct physical measurement of surface shape. Five contemporary freeform PALs (Varilux Comfort Enhanced, Varilux Physio Enhanced, Hoya Lifestyle, Shamir Autograph, and Zeiss Individual) with plano distance power and a +2.00-diopter add were measured with a coordinate measuring machine. The front and back surface heights were physically measured, and the optical properties of each surface, and their combination, were calculated with custom MATLAB routines. Surface shape was described as the sum of Zernike polynomials. Progressive addition lenses were represented as contour plots of spherical equivalent power, cylindrical power, and higher order aberrations (HOAs). Maximum power rate, minimum 1.00-DC corridor width, percentage of lens area with less than 1.00 DC, and root mean square of HOAs were also compared. Comfort Enhanced and Physio Enhanced have freeform front surfaces, Shamir Autograph and Zeiss Individual have freeform back surfaces, and Hoya Lifestyle has freeform properties on both surfaces. However, the overall optical properties are similar, regardless of the lens design. The maximum power rate is between 0.08 and 0.12 diopters per millimeter and the minimum corridor width is between 8 and 11 mm. For a 40-mm lens diameter, the percentage of lens area with less than 1.00 DC is between 64 and 76%. The third-order Zernike terms are the dominant high-order terms in HOAs (78 to 93% of overall shape variance). Higher order aberrations are higher along the corridor area and around the near zone. The maximum root mean square of HOAs based on a 4.5-mm pupil size around the corridor area is between 0.05 and 0.06 µm. This nonoptical method using a coordinate measuring machine can be used to evaluate a PAL by surface height measurements, with the optical properties directly related to its front and back surface designs.

Measuring the spectral emissivity of thermal protection materials during atmospheric reentry simulation

NASA Technical Reports Server (NTRS)

Marble, Elizabeth

1996-01-01

Hypersonic spacecraft reentering the earth's atmosphere encounter extreme heat due to atmospheric friction. Thermal Protection System (TPS) materials shield the craft from this searing heat, which can reach temperatures of 2900 F. Various thermophysical and optical properties of TPS materials are tested at the Johnson Space Center Atmospheric Reentry Materials and Structures Evaluation Facility, which has the capability to simulate critical environmental conditions associated with entry into the earth's atmosphere. Emissivity is an optical property that determines how well a material will reradiate incident heat back into the atmosphere upon reentry, thus protecting the spacecraft from the intense frictional heat. This report describes a method of measuring TPS emissivities using the SR5000 Scanning Spectroradiometer, and includes system characteristics, sample data, and operational procedures developed for arc-jet applications.

10 CFR 20.2302 - Additional requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Additional requirements. 20.2302 Section 20.2302 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Exemptions and Additional Requirements § 20.2302 Additional requirements. The Commission may, by rule, regulation, or order, impose...

10 CFR 20.2302 - Additional requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Additional requirements. 20.2302 Section 20.2302 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Exemptions and Additional Requirements § 20.2302 Additional requirements. The Commission may, by rule, regulation, or order, impose...

10 CFR 20.2302 - Additional requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Additional requirements. 20.2302 Section 20.2302 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Exemptions and Additional Requirements § 20.2302 Additional requirements. The Commission may, by rule, regulation, or order, impose...

Measurement of electromagnetic properties of powder and solid metal materials for additive manufacturing

NASA Astrophysics Data System (ADS)

Todorov, Evgueni Iordanov

2017-04-01

The lack of validated nondestructive evaluation (NDE) techniques for examination during and after additive manufacturing (AM) component fabrication is one of the obstacles in the way of broadening use of AM for critical applications. Knowledge of electromagnetic properties of powder (e.g. feedstock) and solid AM metal components is necessary to evaluate and deploy electromagnetic NDE modalities for examination of AM components. The objective of this research study was to develop and implement techniques for measurement of powder and solid metal electromagnetic properties. Three materials were selected - Inconel 625, duplex stainless steel 2205, and carbon steel 4140. The powder properties were measured with alternate current (AC) model based eddy current technique and direct current (DC) resistivity measurements. The solid metal properties were measured with DC resistivity measurements, DC magnetic techniques, and AC model based eddy current technique. Initial magnetic permeability and electrical conductivity were acquired for both powder and solid metal. Additional magnetic properties such as maximum permeability, coercivity, retentivity, and others were acquired for 2205 and 4140. Two groups of specimens were tested along the build length and width respectively to investigate for possible anisotropy. There was no significant difference or anisotropy when comparing measurements acquired along build length to those along the width. A trend in AC measurements might be associated with build geometry. Powder electrical conductivity was very low and difficult to estimate reliably with techniques used in the study. The agreement between various techniques was very good where adequate comparison was possible.

40 CFR 57.503 - Control measures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Control measures. 57.503 Section 57.503... NONFERROUS SMELTER ORDERS Fugitive Emission Evaluation and Control § 57.503 Control measures. The NSO of any... requirement of § 57.501. Measures required to be implemented may include: (a) Additional supplementary control...

40 CFR 57.503 - Control measures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 6 2012-07-01 2012-07-01 false Control measures. 57.503 Section 57.503... NONFERROUS SMELTER ORDERS Fugitive Emission Evaluation and Control § 57.503 Control measures. The NSO of any... requirement of § 57.501. Measures required to be implemented may include: (a) Additional supplementary control...

40 CFR 57.503 - Control measures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 6 2013-07-01 2013-07-01 false Control measures. 57.503 Section 57.503... NONFERROUS SMELTER ORDERS Fugitive Emission Evaluation and Control § 57.503 Control measures. The NSO of any... requirement of § 57.501. Measures required to be implemented may include: (a) Additional supplementary control...

40 CFR 57.503 - Control measures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 6 2014-07-01 2014-07-01 false Control measures. 57.503 Section 57.503... NONFERROUS SMELTER ORDERS Fugitive Emission Evaluation and Control § 57.503 Control measures. The NSO of any... requirement of § 57.501. Measures required to be implemented may include: (a) Additional supplementary control...

Ex vivo model of meningococcal bacteremia using human blood for measuring vaccine-induced serum passive protective activity.

PubMed

Plested, Joyce S; Welsch, Jo Anne; Granoff, Dan M

2009-06-01

The binding of complement factor H (fH) to meningococci was recently found to be specific for human fH. Therefore, passive protective antibody activity measured in animal models of meningococcal bacteremia may overestimate protection in humans, since in the absence of bound fH, complement activation is not downregulated. We developed an ex vivo model of meningococcal bacteremia using nonimmune human blood to measure the passive protective activity of stored sera from 36 adults who had been immunized with an investigational meningococcal multicomponent recombinant protein vaccine. Before immunization, human complement-mediated serum bactericidal activity (SBA) titers of > or = 1:4 against group B strains H44/76, NZ98/254, and S3032 were present in 19, 11, and 8% of subjects, respectively; these proportions increased to 97, 22, and 36%, respectively, 1 month after dose 3 (P < 0.01 for H44/76 and S3032). Against the two SBA-resistant strains, NZ98/254 and S3032, passive protective titers of > or = 1:4 were present in 11 and 42% of sera before immunization, respectively, and these proportions increased to 61 and 94% after immunization (P < 0.001 for each strain). Most of the sera with SBA titers of <1:4 and passive protective activity showed a level of killing in the whole-blood assay (>1 to 2 log(10) decreases in CFU/ml during a 90-min incubation) similar to that of sera with SBA titers of > or = 1:4. In conclusion, passive protective activity was 2.6- to 2.8-fold more frequent than SBA after immunization. The ability of SBA-negative sera to kill Neisseria meningitidis in human blood where fH is bound to the bacteria provides further evidence that SBA titers of > or = 1:4 measured with human complement may underestimate meningococcal immunity.

Measuring the extent and effectiveness of protected areas as an indicator for meeting global biodiversity targets

PubMed Central

Chape, S; Harrison, J; Spalding, M; Lysenko, I

2005-01-01

There are now over 100 000 protected areas worldwide, covering over 12% of the Earth's land surface. These areas represent one of the most significant human resource use allocations on the planet. The importance of protected areas is reflected in their widely accepted role as an indicator for global targets and environmental assessments. However, measuring the number and extent of protected areas only provides a unidimensional indicator of political commitment to biodiversity conservation. Data on the geographic location and spatial extent of protected areas will not provide information on a key determinant for meeting global biodiversity targets: ‘effectiveness’ in conserving biodiversity. Although tools are being devised to assess management effectiveness, there is no globally accepted metric. Nevertheless, the numerical, spatial and geographic attributes of protected areas can be further enhanced by investigation of the biodiversity coverage of these protected areas, using species, habitats or biogeographic classifications. This paper reviews the current global extent of protected areas in terms of geopolitical and habitat coverage, and considers their value as a global indicator of conservation action or response. The paper discusses the role of the World Database on Protected Areas and collection and quality control issues, and identifies areas for improvement, including how conservation effectiveness indicators may be included in the database to improve the value of protected areas data as an indicator for meeting global biodiversity targets. PMID:15814356

40 CFR 161.75 - Requirements for additional data.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Requirements for additional data. 161.75 Section 161.75 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR REGISTRATION OF ANTIMICROBIAL PESTICIDES General Provisions § 161.75...

Radiation protection measures: Implications on the design of neurosurgery operating rooms.

PubMed

Delgado-López, Pedro David; Sánchez-Jiménez, Javier; Herrero-Gutiérrez, Ana Isabel; Inclán-Cuesta, María Teresa; Corrales-García, Eva María; Martín-Alonso, Javier; Galacho-Harriero, Ana María; Rodríguez-Salazar, Antonio

To describe pros and cons of some radiation protection measures and the implications on the design of a neurosurgery operating room. Concurring with the acquisition and use of an O-arm device, a structural remodeling of our neurosurgery operating room was carried out. The theater was enlarged, the shielding was reinforced and a foldable leaded screen was installed inside the operating room. Radiation doses were measured in front of and behind the screen. The screen provides whole-body radiation protection for all the personnel inside the theater (effective dose <5μSv at 2,5 m from the gantry per O-arm exploration; 0,0μSv received behind the screen per O-arm exploration; and undetectable cumulative annual radiation dose behind the screen), obviates the need for leaded aprons and personal dosimeters, and minimizes the circulation of personnel. Enlarging the size of the operating room allows storing the equipment inside and minimizes the risk of collision and contamination. Rectangular rooms provide greater distance from the source of radiation. Floor, ceiling and walls shielding, a rectangular-shaped and large enough theater, the presence of a foldable leaded screen, and the security systems precluding an unexpected irruption into the operating room during irradiation are relevant issues to consider when designing a neurosurgery operating theater. Copyright © 2018 Sociedad Española de Neurocirugía. Publicado por Elsevier España, S.L.U. All rights reserved.

77 FR 15379 - Protecting Tenants at Foreclosure Act: Additional Guidance on Notification Responsibilities Under...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-15

... provided by PTFA sunset on December 31, 2014. Section 1484 of the Dodd-Frank Wall Street Reform and... protections to December 31, 2014. Section 1484 of the Dodd-Frank Wall Street Reform and Consumer Protection... completion and in acquiring title to and possession of the property. (Failure to foreclose and evict acquire...

Polyfibroblast: A Self-Healing and Galvanic Protection Additive

DTIC Science & Technology

2013-01-25

flour , the rapid addition of liquid created lumps in the powder that were difficult to remove. This issue did not appear to result from the material...probably the worst thing that one can do to the self-healing primer. Small scratches will prematurely rupture the microcapsules that tend to be enriched

Improvement of the Thermal and Optical Performances of Protective Polydimethylsiloxane Space Coatings with Cellulose Nanocrystal Additives.

PubMed

Planes, Mikael; Brand, Jérémie; Lewandowski, Simon; Remaury, Stéphanie; Solé, Stéphane; Le Coz, Cédric; Carlotti, Stéphane; Sèbe, Gilles

2016-10-07

This work investigates the possibility of using cellulose nanocrystals (CNCs) as biobased nanoadditives in protective polydimethylsiloxane (PDMS) space coatings, to improve the thermal and optical performances of the material. CNCs produced from wood pulp were functionalized in different conditions with the objective to improve their dispersibility in the PDMS matrix, increase their thermal stability and provide photoactive functions. Polysiloxane, cinnamate, chloroacetate and trifluoroacetate moieties were accordingly anchored at the CNCs surface by silylation, using two different approaches, or acylation with different functional vinyl esters. The modified CNCs were thoroughly characterized by FT-IR spectroscopy, solid-state NMR spectroscopy and thermogravimetric analysis, before being incorporated into a PDMS space coating formulation in low concentration (0.5 to 4 wt %). The cross-linked PDMS films were subsequently investigated with regards to their mechanical behavior, thermal stability and optical properties after photoaging. Results revealed that the CNC additives could significantly improve the thermal stability of the PDMS coating, up to 140 °C, depending on the treatment and CNC concentration, without affecting the mechanical properties and transparency of the material. In addition, the PDMS films loaded with as low as 1 wt % halogenated nanoparticles, exhibited an improved UV-stability after irradiation in geostationary conditions.

Evaluation of fuel additives for reduction of material imcompatibilities in methanol-gasoline blends

NASA Technical Reports Server (NTRS)

Rodriguez, C. F.; Barbee, J. G.; Knutson, W. K.; Cuellar, J. P., Jr.

1983-01-01

Screening tests determined the efficacy of six commercially available additives as modifiers of methanol's corrosivity toward metals and its weakening of tensile properties of nonmetals in automotive fuel systems. From the screening phase, three additives which seemed to protect some of the metals were tested in higher concentrations and binary combinations in search of optimal application conditions. Results indicate that two of the additives have protective properties and combining them increases the protection of the metals corroded by methanol-gasoline blends. Half of the metals in the tests were not corroded. Testing at recommended concentrations and then at higher concentrations and in combinations shows that the additives would have no protective or harmful effects on the nonmetals. Two additives emerged as candidates for application to the protection of metals in automotive methanol-gasoline fuel systems. The additives tested were assigned letter codes to protect their proprietary nature.

40 CFR 144.85 - Do these additional requirements apply to me?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Do these additional requirements apply to me? 144.85 Section 144.85 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Vehicle Waste Disposal Wells § 144.85 Do these additional requirements apply to me? (a) Large-capacity...

40 CFR 144.85 - Do these additional requirements apply to me?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Do these additional requirements apply to me? 144.85 Section 144.85 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Vehicle Waste Disposal Wells § 144.85 Do these additional requirements apply to me? (a) Large-capacity...

40 CFR 144.85 - Do these additional requirements apply to me?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Do these additional requirements apply to me? 144.85 Section 144.85 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... of Class V Injection Wells § 144.85 Do these additional requirements apply to me? (a) Large-Capacity...

Evaluation of several corrosion protective coating systems on aluminum

NASA Technical Reports Server (NTRS)

Higgins, R. H.

1981-01-01

A study of several protective coating systems for use on aluminum in seawater/seacoast environments was conducted to review the developments made on protective coatings since early in the Space Shuttle program and to perform comparative studies on these coatings to determine their effectiveness for providing corrosion protection during exposure to seawater/seacoast environments. Panels of 2219-T87 aluminum were coated with 21 different systems and exposed to a 5 percent salt spray for 4000 hr. Application properties, adhesion measurements, heat resistance and corrosion protection were evaluated. For comparative studies, the presently specified Bostik epoxy system used on the SRB structures was included. Results of these tests indicate four systems with outstanding performance and four additional systems with protection almost as good. These systems are based on a chromated pretreatment, a chromate epoxy primer, and a polyurethane topcoat. Consideration for one of these systems should be included for those applications where superior corrosion protection for aluminum surfaces is required.

40 CFR 503.5 - Additional or more stringent requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements. 503.5 Section 503.5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STANDARDS FOR THE USE OR DISPOSAL OF SEWAGE SLUDGE General Provisions § 503.5 Additional or more... the use or disposal of sewage sludge in addition to or more stringent than the requirements in this...

Influence of ZrO2 addition on the microstructure and discharge properties of Mg-Zr-O protective layers in alternating current plasma display panels

NASA Astrophysics Data System (ADS)

Guo, Bingang; Liu, Chunliang; Song, Zhongxiao; Liu, Liu; Fan, Yufeng; Xia, Xing; Fan, Duowang

2005-08-01

Mg-Zr-O protective layers for alternating current plasma display panels were deposited by e-beam evaporation. The effect of the ZrO2 addition on both the discharge properties [firing voltage Vf, minimum sustaining voltage Vs, and memory coefficient (MC)] and the microstructure of deposited Mg-Zr-O films were investigated. The results show that the film microstructure changes and the electron emission enhancement due to the ZrO2 addition are the main reasons for the improvements of the discharge properties of Mg-Zr-O films. A small amount of Zr solution in MgO under its solid solubility can effectively increase the outer-shell valence electron emission yield so as to decrease Vf and Vs compared with using a pure MgO protective layer. The ZrO2/(MgO +ZrO2) ratio has a great effect on the film surface conditions. Proper surface morphologies make a good contribution to obtain large MC in accordance with lower firing voltage.

Effect of bank protection measures, Stehekin River, Chelan County, Washington

USGS Publications Warehouse

Nelson, L.M.

1986-01-01

An investigation of the lower Stehekin River was conducted to study the effects on flood elevations and velocities from four bank protection and flood prevention measures that are being contemplated as a means of reducing erosional losses of river bank property. These measures are: bank armoring, armored revetment levees, spur dikes, and redevelopment of old cutoff channels. The banks at seven study sites could be armored without adverse effect on the flood velocities and elevations. The largest increases due to armoring--up to 1.6 ft/sec in velocity and 1 ft in elevation--occurred in the vicinity of sites 5, 6, and 7 where the gradient of the river channel is about 50 ft/mi and the velocities are high to begin with (about 6 to 13 ft/sec). The use of a levee in conjunction with armoring on the northeast bank from sites 5 to 7 would increase the velocities as much as 2.8 ft/sec and increase the elevation as much as 1 ft, but it would also provide some flood protection to the east bank, which is frequently inundated. Spur dikes were considered a practical alternative only at site 3, where reduced bank erosion may occur without aggravating flood inundation or erosion elsewhere. The rerouting of flood flow through an old cutoff channel near site 1 increased the velocity by 3.2 ft/sec and the elevation by 1 ft for the 100-year flood; however, it would move floodwater away from residential property where bank erosion is a problem. The few other old channels that shortcut river bends where much erosion occurs are apparently already part of the channel during floods. (Author 's abstract)

Diastereoselective Additions of Allylmetal Reagents to Free and Protected syn-α,β-Dihydroxyketones Enable Efficient Synthetic Routes to Methyl Trioxacarcinoside A

PubMed Central

Smaltz, Daniel J.; Švenda, Jakub

2012-01-01

Two routes to the 2,6-dideoxysugar methyl trioxacarcinoside A are described. Each was enabled by an apparent α-chelation-controlled addition of an allylmetal reagent to a ketone substrate containing a free α-hydroxyl group and a β-hydroxyl substituent, either free or protected as the corresponding di-tert-butylmethyl silyl ether. Both routes provide practical access to gram-quantities of trioxacarcinose A in a form suitable for glycosidic coupling reactions. PMID:22404560

Measures of safeguard and rehabilitation for landscape protection planning: a qualitative approach based on diversity indicators.

PubMed

La Rosa, Daniele; Privitera, Riccardo; Martinico, Francesco; La Greca, Paolo

2013-09-01

Maintaining existing levels of landscape diversity is becoming more and more important for planning considering the increasing pressures on agricultural ecosystems due to soil sealing, sprawl processes and intensive agriculture. Norms for land-use regulation and measures for landscape Safeguard and Rehabilitation have to take into consideration these threats in landscape planning. Evaluating the diversity of agricultural ecosystems is a fundamental step for proposing sound approaches to planning and managing both soil and landscape, as well as maintaining the related ecosystem services. The paper proposes a method aimed at the qualitative evaluation of spatial diversity of agricultural landscapes using a reduced set of ecological indicators based on land-use vector data. Indicators are calculated for defined landscape units characterized by landscape homogeneity. GIS geoprocessing and spatial analysis functions are employed. The study area is the Province of Enna in Sicily (Italy), which is characterized by cultivation mosaics in its southern region, cereal cultivation in the central region and prevailing natural environments in the northern region. Results from the indicator calculations are used to define measures to be included in a Landscape Protection Plan. Safeguard and Rehabilitation measures are introduced, which link indicator scores to planning protection aims. The results highlight the relevance of some agricultural mosaics in proximity to streams and seasonal fluvial environments, where some undamaged natural environments are still present. For these areas, specific landscape safeguard measures are proposed to preserve their diversity features together with their original agricultural functions. The work shows that even with a reduced number of indicators, a differentiated set of measures can be proposed for a Landscape Protection Plan. Copyright © 2013 Elsevier Ltd. All rights reserved.

Methods of Measuring Vapor Pressures of Lubricants With Their Additives Using TGA and/or Microbalances

NASA Technical Reports Server (NTRS)

Scialdone, John J.; Miller, Michael K.; Montoya, Alex F.

1996-01-01

The life of a space system may be critically dependent on the lubrication of some of its moving parts. The vapor pressure, the quantity of the available lubricant, the temperature and the exhaust venting conductance passage are important considerations in the selection and application of a lubricant. In addition, the oil additives employed to provide certain properties of low friction, surface tension, antioxidant and load bearing characteristics, are also very important and need to be known with regard to their amounts and vapor pressures. This paper reports on the measurements and analyses carried out to obtain those parameters for two often employed lubricants, the Apiezon(TM)-C and the Krytox(TM) AB. The measurements were made employing an electronic microbalance and a thermogravimetric analyzer (TGA) modified to operate in a vacuum. The results have been compared to other data on these oils when available. The identification of the mass fractions of the additives in the oil and their vapor pressures as a function of the temperature were carried out. These may be used to estimate the lubricant life given its quantity and the system vent exhaust conductance. It was found that the Apiezon(TM)-C has three main components with different rates of evaporation while the Krytox(TM) did not indicate any measurable additive.

Measuring the extent of overlaps in protected area designations

PubMed Central

Arnell, Andy; Juffe-Bignoli, Diego; Shi, Yichuan; Bingham, Heather; MacSharry, Brian; Kingston, Naomi

2017-01-01

Over the past decades, a number of national policies and international conventions have been implemented to promote the expansion of the world’s protected area network, leading to a diversification of protected area strategies, types and designations. As a result, many areas are protected by more than one convention, legal instrument, or other effective means which may result in a lack of clarity around the governance and management regimes of particular locations. We assess the degree to which different designations overlap at global, regional and national levels to understand the extent of this phenomenon at different scales. We then compare the distribution and coverage of these multi-designated areas in the terrestrial and marine realms at the global level and among different regions, and we present the percentage of each county’s protected area extent that is under more than one designation. Our findings show that almost a quarter of the world’s protected area network is protected through more than one designation. In fact, we have documented up to eight overlapping designations. These overlaps in protected area designations occur in every region of the world, both in the terrestrial and marine realms, but are more common in the terrestrial realm and in some regions, notably Europe. In the terrestrial realm, the most common overlap is between one national and one international designation. In the marine realm, the most common overlap is between any two national designations. Multi-designations are therefore a widespread phenomenon but its implications are not well understood. This analysis identifies, for the first time, multi-designated areas across all designation types. This is a key step to understand how these areas are managed and governed to then move towards integrated and collaborative approaches that consider the different management and conservation objectives of each designation. PMID:29176888

Measuring the extent of overlaps in protected area designations.

PubMed

Deguignet, Marine; Arnell, Andy; Juffe-Bignoli, Diego; Shi, Yichuan; Bingham, Heather; MacSharry, Brian; Kingston, Naomi

2017-01-01

Over the past decades, a number of national policies and international conventions have been implemented to promote the expansion of the world's protected area network, leading to a diversification of protected area strategies, types and designations. As a result, many areas are protected by more than one convention, legal instrument, or other effective means which may result in a lack of clarity around the governance and management regimes of particular locations. We assess the degree to which different designations overlap at global, regional and national levels to understand the extent of this phenomenon at different scales. We then compare the distribution and coverage of these multi-designated areas in the terrestrial and marine realms at the global level and among different regions, and we present the percentage of each county's protected area extent that is under more than one designation. Our findings show that almost a quarter of the world's protected area network is protected through more than one designation. In fact, we have documented up to eight overlapping designations. These overlaps in protected area designations occur in every region of the world, both in the terrestrial and marine realms, but are more common in the terrestrial realm and in some regions, notably Europe. In the terrestrial realm, the most common overlap is between one national and one international designation. In the marine realm, the most common overlap is between any two national designations. Multi-designations are therefore a widespread phenomenon but its implications are not well understood. This analysis identifies, for the first time, multi-designated areas across all designation types. This is a key step to understand how these areas are managed and governed to then move towards integrated and collaborative approaches that consider the different management and conservation objectives of each designation.

Perception and personal protective measures toward mosquito bites by communities in Jaffna District, northern Sri Lanka.

PubMed

Surendran, S N; Kajatheepan, A

2007-06-01

Mosquito-borne diseases are of public health importance in war-torn northern Sri Lanka. The severity of mosquito bites and attitudes of the public toward mosquito problems were investigated using a structured questionnaire among communities in 3 administrative divisions in Jaffna District. One hundred fifty-four households were interviewed during this study. Sixty-four percent of the respondents reported that the mosquito problem was severe in their localities. Fifty-two percent stated that mosquito-biting activity was severe in the evening (1500 h-1900 h), 41% at night (after 1900 h), and 7% throughout the day. Severity of mosquito menace was found to have no association with type of house construction. Seventy-seven percent were able to name at least 1 disease transmitted by mosquitoes. Statistical analysis showed no association between education level and public awareness on mosquito-borne diseases. Nearly 88% were able to identify at least a breeding source of mosquitoes and most of them practice measures to eliminate suitable environments for mosquito breeding. Ninety-six percent used personal protective measures against mosquito bites during some seasons or throughout the year. Mosquito coils were the most commonly used personal protective method followed by bed nets. The monthly expenditure for personal protective measures varied from US$0.19 (LKR 20) to US$3.40 (LKR 350).

Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision

NASA Astrophysics Data System (ADS)

Xiong, Jun; Zhang, Guangjun

2013-11-01

Additive manufacturing based on gas metal arc welding is an advanced technique for depositing fully dense components with low cost. Despite this fact, techniques to achieve accurate control and automation of the process have not yet been perfectly developed. The online measurement of the deposited bead geometry is a key problem for reliable control. In this work a passive vision-sensing system, comprising two cameras and composite filtering techniques, was proposed for real-time detection of the bead height and width through deposition of thin walls. The nozzle to the top surface distance was monitored for eliminating accumulated height errors during the multi-layer deposition process. Various image processing algorithms were applied and discussed for extracting feature parameters. A calibration procedure was presented for the monitoring system. Validation experiments confirmed the effectiveness of the online measurement system for bead geometry in layered additive manufacturing.

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery.

PubMed

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005-2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.

INTERNATIONAL STANDARDS ON FOOD AND ENVIRONMENTAL RADIOACTIVITY MEASUREMENT FOR RADIOLOGICAL PROTECTION: STATUS AND PERSPECTIVES.

PubMed

Calmet, D; Ameon, R; Bombard, A; Brun, S; Byrde, F; Chen, J; Duda, J-M; Forte, M; Fournier, M; Fronka, A; Haug, T; Herranz, M; Husain, A; Jerome, S; Jiranek, M; Judge, S; Kim, S B; Kwakman, P; Loyen, J; LLaurado, M; Michel, R; Porterfield, D; Ratsirahonana, A; Richards, A; Rovenska, K; Sanada, T; Schuler, C; Thomas, L; Tokonami, S; Tsapalov, A; Yamada, T

2017-04-01

Radiological protection is a matter of concern for members of the public and thus national authorities are more likely to trust the quality of radioactivity data provided by accredited laboratories using common standards. Normative approach based on international standards aims to ensure the accuracy or validity of the test result through calibrations and measurements traceable to the International System of Units. This approach guarantees that radioactivity test results on the same types of samples are comparable over time and space as well as between different testing laboratories. Today, testing laboratories involved in radioactivity measurement have a set of more than 150 international standards to help them perform their work. Most of them are published by the International Standardization Organization (ISO) and the International Electrotechnical Commission (IEC). This paper reviews the most essential ISO standards that give guidance to testing laboratories at different stages from sampling planning to the transmission of the test report to their customers, summarizes recent activities and achievements and present the perspectives on new standards under development by the ISO Working Groups dealing with radioactivity measurement in connection with radiological protection. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Physical protection philosophy and techniques in Sweden

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dufva, B.

1988-01-01

The circumstances for the protection of nuclear power plants are special in Sweden. A very important factor is that armed guards at the facilities are alien to the Swedish society. They do not use them. The Swedish concept of physical protection accepts that the aggressor will get into the facility. With this in mind, the Swedish Nuclear Power Inspectorate (SKI) has established the policy that administrative, technical, and organizational measures will be directed toward preventing an aggressor from damaging the reactor, even if he has occupied the facility. In addition, the best conditions possible shall be established for the operatormore » and the police to reoccupy the plant. The author believes this policy is different from that of many other countries. Therefore, he focusses on the Swedish philosophy and techniques for the physical protection of nuclear power plants.« less

40 CFR 31.6 - Additions and exceptions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE UNIFORM ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS General § 31.6 Additions and exceptions. (a) For classes of grants and grantees subject to this part...

40 CFR 141.624 - Additional requirements for consecutive systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Additional requirements for consecutive systems. 141.624 Section 141.624 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Stage 2 Disinfection...

40 CFR 141.624 - Additional requirements for consecutive systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Additional requirements for consecutive systems. 141.624 Section 141.624 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Stage 2 Disinfection...

40 CFR 141.624 - Additional requirements for consecutive systems.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Additional requirements for consecutive systems. 141.624 Section 141.624 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Stage 2 Disinfection...

40 CFR 141.624 - Additional requirements for consecutive systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Additional requirements for consecutive systems. 141.624 Section 141.624 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Stage 2 Disinfection...

Emissivity Measurements of Additively Manufactured Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morgan, Robert Vaughn; Reid, Robert Stowers; Baker, Andrew M.

The emissivity of common 3D printing materials such as ABS and PLA were measured using a reflectivity meter and have the measured value of approximately 0.92. Adding a conductive material to the filament appears to cause a decrease in the emissivity of the surface. The angular dependence of the emissivity and the apparent temperature was measured using a FLIR infrared camera showing that the emissivity does not change much for shallow angles less than 40 angular degrees, and drops off dramatically after 70 angular degrees.

Sepsis-induced myocardial dysfunction and myocardial protection from ischemia/reperfusion injury.

PubMed

McDonough, Kathleen H; Virag, Jitka Ismail

2006-01-01

Sepsis, bacteremia and inflammation cause myocardial depression. The mechanism of the dysfunction is not clearly established partly because dysfunction can be elicited by many different mechanisms which can all manifest in disruption of myocardial mechanical function. In addition the models of sepsis and bacteremia and inflammation may vary drastically in the sequence of the coordinated immune response to the inflammatory or septic stimulus. Patterns of cytokine expression can vary as can other responses of the immune system. Patterns of neurohumoral activation in response to the stress of sepsis or bacteremia or inflammation can also vary in both magnitude of response and temporal sequence of response. Stress induced activation of the sympathetic nervous system and humoral responses to stress have a wide range of intensity that can be elicited. The fairly uniform response of the myocardium indicating cardiac dysfunction is surprisingly constant. Systolic performance, as measured by stroke volume or cardiac output and pressure work as estimated by ventricular pressure, are impaired when myocardial contraction is compromised. At times, diastolic function, assessed by ventricular relaxation and filling, is impaired. In addition to the dysfunction that occurs, there is a longer term response of the myocardium to sepsis, and this response is similar to that which is elicited in the heart by multiple brief ischemia/reperfusion episodes and by numerous pharmacological agents as well as heat stress and modified forms of lipopolysaccharide. The myocardium develops protection after an initial stress such that during a second stress, the myocardium does not exhibit as much damage as does a non-protected heart. Many agents can induce this protection which has been termed preconditioning. Both early preconditioning (protection that is measurable min to hours after the initial stimulus) and late preconditioning (protection that is measurable hours to days after the initial

Protective sheath for a continuous measurement thermocouple

DOEpatents

Phillippi, R.M.

1991-12-03

Disclosed is a protective thermocouple sheath of a magnesia graphite refractory material for use in continuous temperature measurements of molten metal in a metallurgical ladle and having a basic slag layer thereon. The sheath includes an elongated torpedo-shaped sheath body formed of a refractory composition and having an interior borehole extending axially therethrough and adapted to receive a thermocouple. The sheath body includes a lower end which is closed about the borehole and forms a narrow, tapered tip. The sheath body also includes a first body portion integral with the tapered tip and having a relatively constant cross section and providing a thin wall around the borehole. The sheath body also includes a second body portion having a relatively constant cross section larger than the cross section of the first body portion and providing a thicker wall around the borehole. The borehole terminates in an open end at the second body portion. The tapered tip is adapted to penetrate the slag layer and the thicker second body portion and its magnesia constituent material are adapted to withstand chemical attack thereon from the slag layer. The graphite constituent improves thermal conductivity of the refractory material and, thus, enhances the thermal responsiveness of the device. 4 figures.

Protective sheath for a continuous measurement thermocouple

DOEpatents

Phillippi, R. Michael

1991-01-01

Disclosed is a protective thermocouple sheath of a magnesia graphite refractory material for use in continuous temperature measurements of molten metal in a metallurgical ladle and having a basic slag layer thereon. The sheath includes an elongated torpedo-shaped sheath body formed of a refractory composition and having an interior borehole extending axially therethrough and adapted to receive a thermocouple. The sheath body includes a lower end which is closed about the borehole and forms a narrow, tapered tip. The sheath body also includes a first body portion integral with the tapered tip and having a relatively constant cross section and providing a thin wall around the borehole. The sheath body also includes a second body portion having a relatively constant cross section larger than the cross section of the first body portion and providing a thicker wall around the borehole. The borehole terminates in an open end at the second body portion. The tapered tip is adapted to penetrate the slag layer and the thicker second body portion and its magnesia constituent material are adapted to withstand chemical attack thereon from the slag layer. The graphite constituent improves thermal conductivity of the refractory material and, thus, enhances the thermal responsiveness of the device.

New ways to analyze word generation performance in brain injury: A systematic review and meta-analysis of additional performance measures.

PubMed

Thiele, Kristina; Quinting, Jana Marie; Stenneken, Prisca

2016-09-01

The investigation of word generation performance is an accepted, widely used, and well-established method for examining cognitive, language, or communication impairment due to brain damage. The performance measure traditionally applied in the investigation of word generation is the number of correct responses. Previous studies, however, have suggested that this measure does not capture all potentially relevant aspects of word generation performance and hence its underlying processes, so that its analytical and explanatory power of word generation performance might be rather limited. Therefore, additional qualitative or quantitative performance measures have been introduced to gain information that goes beyond the deficit and allows for therapeutic implications. We undertook a systematic review and meta-analysis of original research that focused on the application of additional measures of word generation performance in adult clinical populations with acquired brain injury. Word generation tasks are an integral part of many different tests, but only few use additional performance measures in addition to the number of correct responses in the analysis of word generation performance. Additional measures, which showed increased or similar diagnostic utility relative to the traditional performance measure, regarded clustering and switching, error types, and temporal characteristics. The potential of additional performance measures is not yet fully exhausted in patients with brain injury. The temporal measure of response latencies in particular is not adequately represented, though it may be a reliable measure especially for identifying subtle impairments. Unfortunately, there is no general consensus as of yet on which additional measures are best suited to characterizing word generation performance. Further research is needed to specify the additional parameters that are best qualified for identifying and characterizing impaired word generation performance.

Measuring financial protection for health in families with chronic conditions in Rural China.

PubMed

Jiang, Chunhong; Ma, Jingdong; Zhang, Xiang; Luo, Wujin

2012-11-16

As the world's largest developing country, China has entered into the epidemiological phase characterized by high life expectancy and high morbidity and mortality from chronic diseases. Cardiovascular diseases, chronic obstructive pulmonary diseases, and malignant tumors have become the leading causes of death since the 1990s. Constant payments for maintaining the health status of a family member who has chronic diseases could exhaust household resources, undermining fiscal support for other necessities and eventually resulting in poverty. The purpose of this study is to probe to what degree health expenditure for chronic diseases can impoverish rural families and whether the New Cooperative Medical Scheme can effectively protect families with chronic patients against catastrophic health expenditures. We used data from the 4th National Health Services Survey conducted in July 2008 in China. The rural sample we included in the analysis comprised 39,054 households. We used both households suffering from medical impoverishment and households with catastrophic health expenditures to compare the financial protection for families having a chronic patient with different insurance coverage statuses. We used a logistic regression model to estimate the impact of different benefit packages on health financial protection for families having a chronic patient. An additional 10.53% of the families with a chronic patient were impoverished because of healthcare expenditure, which is more than twice the proportion in families without a chronic patient. There is a higher catastrophic health expenditure incidence in the families with a chronic patient. The results of logistic regression show that simply adding extra benefits did not reduce the financial risks. There is a lack of effective financial protection for healthcare expenditures for families with a chronic patient in rural China, even though there is a high coverage rate with the New Cooperative Medical Schemes. Given the

Measuring financial protection for health in families with chronic conditions in Rural China

PubMed Central

2012-01-01

Background As the world’s largest developing country, China has entered into the epidemiological phase characterized by high life expectancy and high morbidity and mortality from chronic diseases. Cardiovascular diseases, chronic obstructive pulmonary diseases, and malignant tumors have become the leading causes of death since the 1990s. Constant payments for maintaining the health status of a family member who has chronic diseases could exhaust household resources, undermining fiscal support for other necessities and eventually resulting in poverty. The purpose of this study is to probe to what degree health expenditure for chronic diseases can impoverish rural families and whether the New Cooperative Medical Scheme can effectively protect families with chronic patients against catastrophic health expenditures. Methods We used data from the 4th National Health Services Survey conducted in July 2008 in China. The rural sample we included in the analysis comprised 39,054 households. We used both households suffering from medical impoverishment and households with catastrophic health expenditures to compare the financial protection for families having a chronic patient with different insurance coverage statuses. We used a logistic regression model to estimate the impact of different benefit packages on health financial protection for families having a chronic patient. Results An additional 10.53% of the families with a chronic patient were impoverished because of healthcare expenditure, which is more than twice the proportion in families without a chronic patient. There is a higher catastrophic health expenditure incidence in the families with a chronic patient. The results of logistic regression show that simply adding extra benefits did not reduce the financial risks. Conclusions There is a lack of effective financial protection for healthcare expenditures for families with a chronic patient in rural China, even though there is a high coverage rate with the New

43 CFR 3272.12 - What environmental protection measures must I include in my utilization plan?

Code of Federal Regulations, 2011 CFR

2011-10-01

... must I include in my utilization plan? 3272.12 Section 3272.12 Public Lands: Interior Regulations... MANAGEMENT (3000) GEOTHERMAL RESOURCE LEASING Utilization Plan and Facility Construction Permit § 3272.12 What environmental protection measures must I include in my utilization plan? (a) Describe, at a...

Physico-chemical protection, rather than biochemical composition, governs the responses of soil organic carbon decomposition to nitrogen addition in a temperate agroecosystem.

PubMed

Tan, Wenbing; Wang, Guoan; Huang, Caihong; Gao, Rutai; Xi, Beidou; Zhu, Biao

2017-11-15

The heterogeneous responses of soil organic carbon (SOC) decomposition in different soil fractions to nitrogen (N) addition remain elusive. In this study, turnover rates of SOC in different aggregate fractions were quantified based on changes in δ 13 C following the conversion of C 3 to C 4 vegetation in a temperate agroecosystem. The turnover of both total organic matter and specific organic compound classes within each aggregate fraction was inhibited by N addition. Moreover, the intensity of inhibition increases with decreasing aggregate size and increasing N addition level, but does not vary among chemical compound classes within each aggregate fraction. Overall, the response of SOC decomposition to N addition is dependent on the physico-chemical protection of SOC by aggregates and minerals, rather than the biochemical composition of organic substrates. The results of this study could help to understand the fate of SOC in the context of increasing N deposition. Copyright © 2017 Elsevier B.V. All rights reserved.

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

PubMed Central

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc. PMID:26652689

Dual overcharge protection and solid electrolyte interphase-improving action in Li-ion cells containing a bis-annulated dialkoxyarene electrolyte additive

NASA Astrophysics Data System (ADS)

Zhang, Jingjing; Shkrob, Ilya A.; Assary, Rajeev S.; Zhang, Shuo; Hu, Bin; Liao, Chen; Zhang, Zhengcheng; Zhang, Lu

2018-02-01

1,4-Dialkoxybenzene additives are commonly used as redox active shuttles in lithium-ion batteries in order to prevent runaway oxidation of electrolyte when overcharge conditions set in. During this action the shuttle molecule goes through a futile cycle, becoming oxidized at the cathode and reduced at the anode. Minimizing parasitic reactions in all states of charge is paramount for sustained protective action. Here we demonstrate that recently developed bis-annulated 9,10-bis(2-methoxyethoxy)-1,2,3,4,5,6,7,8-octahydro-1,4:5,8-dimethano-anthracene shuttle molecule (that yields exceptionally stable radical cations) survives over 120 cycles of overcharge abuse with 100% overcharge ratio at C/5 rate. Equally remarkably, in the presence of this additive the cell impedance becomes significantly lower compared to the control cells without the additive; this decrease is observed during the formation, normal cycling, and even under overcharge conditions. This unusual dual action has not been observed in other redox shuttle systems, and it presents considerable practical interest.

40 CFR 80.162 - Additive compositional data.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Additive compositional data. 80.162... (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Detergent Gasoline § 80.162 Additive compositional data... gasoline detergency requirements of this subpart, the compositional data to be supplied to EPA by the...

40 CFR 80.162 - Additive compositional data.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Additive compositional data. 80.162... (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Detergent Gasoline § 80.162 Additive compositional data... gasoline detergency requirements of this subpart, the compositional data to be supplied to EPA by the...

40 CFR 80.162 - Additive compositional data.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Additive compositional data. 80.162... (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Detergent Gasoline § 80.162 Additive compositional data... gasoline detergency requirements of this subpart, the compositional data to be supplied to EPA by the...

40 CFR 80.162 - Additive compositional data.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Additive compositional data. 80.162... (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Detergent Gasoline § 80.162 Additive compositional data... gasoline detergency requirements of this subpart, the compositional data to be supplied to EPA by the...

40 CFR 80.162 - Additive compositional data.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Additive compositional data. 80.162... (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Detergent Gasoline § 80.162 Additive compositional data... gasoline detergency requirements of this subpart, the compositional data to be supplied to EPA by the...

The Highly Selective Caspase-1 Inhibitor VX-765 Provides Additive Protection Against Myocardial Infarction in Rat Hearts When Combined With a Platelet Inhibitor.

PubMed

Yang, Xi-Ming; Downey, James M; Cohen, Michael V; Housley, Nicole A; Alvarez, Diego F; Audia, Jonathon P

2017-11-01

Use of ischemic postconditioning and other related cardioprotective interventions to treat patients with acute myocardial infarction (AMI) has failed to improve outcomes in clinical trials. Because P2Y 12 inhibitors are themselves postconditioning mimetics, it has been postulated that the loading dose of platelet inhibitors routinely given to patients treated for AMI masks the anti-infarct effect of other intended cardioprotective interventions. To further improve outcomes of patients with AMI, an intervention must be able to provide additive protection in the presence of a P2Y 12 platelet inhibitor. Previous studies reported an anti-infarct effect using a peptide inhibitor of the pro-inflammatory caspase-1 in animal models of AMI. Herein we tested whether a pharmacologic caspase-1 inhibitor can further limit infarct size in open-chest, anesthetized rats treated with a P2Y 12 inhibitor. One hour occlusion of a coronary branch followed by 2 hours of reperfusion was used to simulate clinical AMI and reflow. One group of rats received an intravenous bolus of 16 mg/kg of the highly selective caspase-1 inhibitor VX-765 30 minutes prior to onset of ischemia. A second group received a 60 µg/kg intravenous bolus of the P2Y 12 inhibitor cangrelor 10 minutes prior to reperfusion followed by 6 µg/kg/min continuous infusion. A third group received treatment with both inhibitors as above. Control animals received no treatment. Infarct size was measured by tetrazolium stain and volume of muscle at risk by fluorescent microspheres. In untreated hearts, 73.7% ± 4.1% of the ischemic zone infarcted. Treatment with either cangrelor or VX-765 alone reduced infarct size to 43.8% ± 2.4% and 39.6% ± 3.6% of the ischemic zone, respectively. Combining cangrelor and VX-765 was highly protective, resulting in only 14.0% ± 2.9% infarction. The ability of VX-765 to provide protection beyond that of a platelet inhibitor alone positions it as an attractive candidate therapy to further

Use of personal protective equipment for respiratory protection.

PubMed

Sargent, Edward V; Gallo, Frank

2003-01-01

Management of hazards in biomedical research facilities requires the application of the traditional industrial hygiene responsibilities of anticipation, recognition, evaluation, and control to characterize the work environment, evaluate tasks and equipment, identify hazards, define exposure groups, and recommend controls. Generally, the diversity and unique characteristics of hazards faced by laboratory and animal facility employees and the short-term and low-level nature of the exposures factor into the selection of proper exposure control measures in the laboratory. The proper selection of control measures is based on a hierarchy of elimination and minimization by engineering controls, followed last by personal protective equipment when exposures cannot be eliminated. Once it is decided that personal protective equipment is needed, specific regulations and guidelines define safety standards for research facilities, including the elements of a sound respiratory protection program. These elements include respirator selection (including appropriate protection factors), medical evaluation, fit testing, training, inspection, maintenance and care, quality, quantity and flow of breathing air, and routine and emergency use procedures.

Cleaning and Cleanliness Measurement of Additive Manufactured Parts

NASA Technical Reports Server (NTRS)

Welker, Roger W.; Mitchell, Mark A.

2015-01-01

The successful acquisition and utilization of piece parts and assemblies for contamination sensitive applications requires application of cleanliness acceptance criteria. Contamination can be classified using many different schemes. One common scheme is classification as organic, ionic and particulate contaminants. These may be present in and on the surface of solid components and assemblies or may be dispersed in various gaseous or liquid media. This discussion will focus on insoluble particle contamination on the surface of piece parts and assemblies. Cleanliness of parts can be controlled using two strategies, referred to as gross cleanliness and precision cleanliness. Under a gross cleanliness strategy acceptance is based on visual cleanliness. This approach introduces a number of concerns that render it unsuitable for controlling cleanliness of high technology products. Under the precision cleanliness strategy, subjective, visual assessment of cleanliness is replaced by objective measurement of cleanliness. When a precision cleanliness strategy is adopted there naturally arises the question: How clean is clean enough? The six commonly used methods for establishing objective cleanliness acceptance limits will be discussed. Special emphasis shall focus on the use of multiple extraction, a technique that has been demonstrated for additively manufactured parts.

Measuring the Impact of Child Protection through Activation States

ERIC Educational Resources Information Center

Brackenridge, Celia H.; Pawlaczek, Zofia; Bringer, Joy D.; Cockburn, Claudi; Nutt, Gareth; Pitchford, Andy; Russell, Kate

2005-01-01

Child protection (CP) has risen to the top of the UK sports policy agenda in the past four years and the Football Association has invested in this major strategy as part of its commitment to "use the power of football to build a better future" (Football Association, 2000a). Evidencing the impact of child protection is, however, a complex…

Additional Measurements and Analyses of H217O and H218O

NASA Astrophysics Data System (ADS)

Pearson, John; Yu, Shanshan; Walters, Adam; Daly, Adam M.

2015-06-01

Historically the analysis of the spectrum of water has been a balance between the quality of the data set and the applicability of the Hamiltonian to a highly non-rigid molecule. Recently, a number of different non-rigid analysis approaches have successfully been applied to 16O water resulting in a self-consistent set of transitions and energy levels to high J which allowed the spectrum to be modeled to experimental precision. The data set for 17O and 18O water was previously reviewed and many of the problematic measurements identified, but Hamiltonian modeling of the remaining data resulted in significantly poorer quality fits than that for the 16O parent. As a result, we have made additional microwave measurements and modeled the existing 17O and 18O data sets with an Euler series model. This effort has illuminated a number of additional problematic measurements in the previous data sets and has resulted in analyses of 17O and 18O water that are of similar quality to the 16O analysis. We report the new lines, the analyses and make recommendations on the quality of the experimental data sets. SS. Yu, J.C. Pearson, B.J. Drouin et al. J. Mol. Spectrosc. 279,~16-25 (2012) J. Tennyson, P.F. Bernath, L.R. Brown et al. J. Quant. Spectrosc. Rad. Trans. 117, 29-58 (2013) J. Tennyson, P.F. Bernath, L.R. Brown et al. J. Quant. Spectrosc. Rad. Trans. 110, 573-596 (2009) H.M. Pickett, J.C. Pearson, C.E. Miller J. Mol. Spectrosc. 233, 174-179 (2005)

Measurement of impulse peak insertion loss for four hearing protection devices in field conditions

PubMed Central

Murphy, William J.; Flamme, Gregory A.; Meinke, Deanna K.; Sondergaard, Jacob; Finan, Donald S.; Lankford, James E.; Khan, Amir; Vernon, Julia; Stewart, Michael

2015-01-01

Objective In 2009, the U.S. Environmental Protection Agency (EPA) proposed an impulse noise reduction rating (NRR) for hearing protection devices based upon the impulse peak insertion loss (IPIL) methods in the ANSI S12.42-2010 standard. This study tests the ANSI S12.42 methods with a range of hearing protection devices measured in field conditions. Design The method utilizes an acoustic test fixture and three ranges for impulse levels: 130–134, 148–152, and 166–170 dB peak SPL. For this study, four different models of hearing protectors were tested: Bilsom 707 Impact II electronic earmuff, E·A·R Pod Express, E·A·R Combat Arms version 4, and the Etymotic Research, Inc. Electronic BlastPLG™ EB1. Study sample Five samples of each protector were fitted on the fixture or inserted in the fixture's ear canal five times for each impulse level. Impulses were generated by a 0.223 caliber rifle. Results The average IPILs increased with peak pressure and ranged between 20 and 38 dB. For some protectors, significant differences were observed across protector examples of the same model, and across insertions. Conclusions The EPA's proposed methods provide consistent and reproducible results. The proposed impulse NRR rating should utilize the minimum and maximum protection percentiles as determined by the ANSI S12.42-2010 methods. PMID:22176308

Assessing the use of an infrared spectrum hyperpixel array imager to measure temperature during additive and subtractive manufacturing

NASA Astrophysics Data System (ADS)

Whitenton, Eric; Heigel, Jarred; Lane, Brandon; Moylan, Shawn

2016-05-01

Accurate non-contact temperature measurement is important to optimize manufacturing processes. This applies to both additive (3D printing) and subtractive (material removal by machining) manufacturing. Performing accurate single wavelength thermography suffers numerous challenges. A potential alternative is hyperpixel array hyperspectral imaging. Focusing on metals, this paper discusses issues involved such as unknown or changing emissivity, inaccurate greybody assumptions, motion blur, and size of source effects. The algorithm which converts measured thermal spectra to emissivity and temperature uses a customized multistep non-linear equation solver to determine the best-fit emission curve. Emissivity dependence on wavelength may be assumed uniform or have a relationship typical for metals. The custom software displays residuals for intensity, temperature, and emissivity to gauge the correctness of the greybody assumption. Initial results are shown from a laser powder-bed fusion additive process, as well as a machining process. In addition, the effects of motion blur are analyzed, which occurs in both additive and subtractive manufacturing processes. In a laser powder-bed fusion additive process, the scanning laser causes the melt pool to move rapidly, causing a motion blur-like effect. In machining, measuring temperature of the rapidly moving chip is a desirable goal to develop and validate simulations of the cutting process. A moving slit target is imaged to characterize how the measured temperature values are affected by motion of a measured target.

Protective effect of dextrans on glucose oxidase denaturation and inactivation.

PubMed

Altikatoglu, Melda; Basaran-Elalmis, Yeliz

2012-08-01

In the present study, the stabilizing effect of dextrans as additives on the denaturation and inactivation of glucose oxidase (GOD) was investigated. Three different molecular weighted dextrans (M(w) 17.5, 75, 188 kD) were used with different concentrations. Dramatically increased enzyme activities were measured after one hour of incubation of enzyme with additives between 25-40°C in water bath. Highest activity value was measured with 75 kDa molecular weighted dextran (in concentration 30% w/v) at pH 5. Dextran as an additive supplied a long shelf-life to the enzyme at 4°C. In the presence of the 75 kDa dextran, the enzyme was more stable and its activity was increased 2.7-fold at 30°C. In addition, dextran protected GOD against inactivation by a n-heptane/aqueous buffer-stirred system.

Constructing a resilience index for the Enhanced Critical Infrastructure Protection Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisher, R. E.; Bassett, G. W.; Buehring, W. A.

2010-10-14

necessary component of the risk management framework and infrastructure protection. This shift in focus toward resilience complements the analysis of protective measures by taking into account the three other phases of risk management: mitigation, response, and recovery (Figure 1). Thus, the addition of a robust resilience index (RI) to the established PMI/VI provides vital information to owners/operators throughout the risk management process. Combining a pre-incident focus with a better understanding of resilience, as well as potential consequences from damaged CIKR, allows owners/operators to better understand different ways to decrease risk by (1) increasing physical security measures to prevent an incident, (2) supplementing redundancy to mitigate the effects of an incident, and (3) enhancing emergency action and business continuity planning to increase the effectiveness of recovery procedures. Information provided by the RI methodology is also used by facility owners/operators to better understand how their facilities compare to similar sector/subsector sites and to help them make risk-based decisions. This report provides an overview of the RI methodology developed to estimate resilience and provide resilience comparisons for sectors and subsectors. The information will be used to (1) assist DHS in analyzing existing response and recovery methods and programs at facilities and (2) identify potential ways to increase resilience. The RI methodology is based on principles of Appreciative Inquiry, which is 'the coevolutionary search for the best in people, their organizations, and the relevant world around them' (Cooperrider et al. 2005). Appreciative Inquiry identifies the best of 'what is' and helps to envision 'what might be.' The ECIP program and the RI represent a new model (using Appreciative Inquiry principles) for information sharing between government and industry (Fisher and Petit 2010). A 'dashboard' display, which provides an interactive tool - rather than a

Measurement of the efficacy of calcium silicate for the protection and repair of dental enamel.

PubMed

Parker, Alexander S; Patel, Anisha N; Al Botros, Rehab; Snowden, Michael E; McKelvey, Kim; Unwin, Patrick R; Ashcroft, Alexander T; Carvell, Mel; Joiner, Andrew; Peruffo, Massimo

2014-06-01

To investigate the formation of hydroxyapatite (HAP) from calcium silicate and the deposition of calcium silicate onto sound and acid eroded enamel surfaces in order to investigate its repair and protective properties. Calcium silicate was mixed with phosphate buffer for seven days and the resulting solids analysed for crystalline phases by Raman spectroscopy. Deposition studies were conducted on bovine enamel surfaces. Acid etched regions were produced on the enamel surfaces using scanning electrochemical cell microscopy (SECCM) with acid filled pipettes and varying contact times. Following treatment with calcium silicate, the deposition was visualised with FE-SEM and etch pit volumes were measured by AFM. A second set of bovine enamel specimens were pre-treated with calcium silicate and fluoride, before acid exposure with the SECCM. The volumes of the resultant acid etched pits were measured using AFM and the intrinsic rate constant for calcium loss was calculated. Raman spectroscopy confirmed that HAP was formed from calcium silicate. Deposition studies demonstrated greater delivery of calcium silicate to acid eroded than sound enamel and that the volume of acid etched enamel pits was significantly reduced following one treatment (p<0.05). In the protection study, the intrinsic rate constant for calcium loss from enamel was 0.092 ± 0.008 cm/s. This was significantly reduced, 0.056 ± 0.005 cm/s, for the calcium silicate treatments (p<0.0001). Calcium silicate can transform into HAP and can be deposited on acid eroded and sound enamel surfaces. Calcium silicate can provide significant protection of sound enamel from acid challenges. Calcium silicate is a material that has potential for a new approach to the repair of demineralised enamel and the protection of enamel from acid attacks, leading to significant dental hard tissue benefits. © 2014 Elsevier Ltd. All rights reserved.

Evaluation of airway protection: Quantitative timing measures versus penetration/aspiration score.

PubMed

Kendall, Katherine A

2017-10-01

Quantitative measures of swallowing function may improve the reliability and accuracy of modified barium swallow (MBS) study interpretation. Quantitative study analysis has not been widely instituted, however, secondary to concerns about the time required to make measures and a lack of research demonstrating impact on MBS interpretation. This study compares the accuracy of the penetration/aspiration (PEN/ASP) scale (an observational visual-perceptual assessment tool) to quantitative measures of airway closure timing relative to the arrival of the bolus at the upper esophageal sphincter in identifying a failure of airway protection during deglutition. Retrospective review of clinical swallowing data from a university-based outpatient clinic. Swallowing data from 426 patients were reviewed. Patients with normal PEN/ASP scores were identified, and the results of quantitative airway closure timing measures for three liquid bolus sizes were evaluated. The incidence of significant airway closure delay with and without a normal PEN/ASP score was determined. Inter-rater reliability for the quantitative measures was calculated. In patients with a normal PEN/ASP score, 33% demonstrated a delay in airway closure on at least one swallow during the MBS study. There was no correlation between PEN/ASP score and airway closure delay. Inter-rater reliability for the quantitative measure of airway closure timing was nearly perfect (intraclass correlation coefficient = 0.973). The use of quantitative measures of swallowing function, in conjunction with traditional visual perceptual methods of MBS study interpretation, improves the identification of airway closure delay, and hence, potential aspiration risk, even when no penetration or aspiration is apparent on the MBS study. 4. Laryngoscope, 127:2314-2318, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

30 CFR 282.28 - Environmental protection measures.

Code of Federal Regulations, 2012 CFR

2012-07-01

...)(1) The lessee shall monitor activities in a manner that develops the data and information necessary... activities on the environment on and off the lease; develop and evaluate methods for mitigating adverse... with lease and other requirements for the protection of the environment. (2) Monitoring of...

30 CFR 282.28 - Environmental protection measures.

Code of Federal Regulations, 2013 CFR

2013-07-01

...)(1) The lessee shall monitor activities in a manner that develops the data and information necessary... activities on the environment on and off the lease; develop and evaluate methods for mitigating adverse... with lease and other requirements for the protection of the environment. (2) Monitoring of...

30 CFR 282.28 - Environmental protection measures.

Code of Federal Regulations, 2014 CFR

2014-07-01

...)(1) The lessee shall monitor activities in a manner that develops the data and information necessary... activities on the environment on and off the lease; develop and evaluate methods for mitigating adverse... with lease and other requirements for the protection of the environment. (2) Monitoring of...

Balance times of multidimensional quasi-additive potentials for a measure-preserving semiflow

NASA Astrophysics Data System (ADS)

Dai, Xiongping

2013-12-01

Let \\theta\\colon X\\times{T}\\rightarrow X;\\ (x,t)\\mapsto{x{\\boldsymbol\\cdot} t} , where {T}={Z}_+ or {R}_+ , be a measure-preserving semiflow on a probability space (X,\\mathscr{F},\\mu) and given a d-dimensional measurable potential p\\colon X\\times{T}\\rightarrow{R}^d which is δ-quasi-additive with respect to θ, where δ ⩾ 0 namely, for μ-a.e. x ∈ X and for all s,t\\in{T} , \\begin{equation*}|p(x,t+s)-(p(x,t)+p(x{\\boldsymbol\\cdot} t,s))|\\le\\delta. \\end{equation*} We prove that if there exists a measurable {R}^d -valued function p*(x) such that \\begin{equation*}\\lim_{t\\to\\infty}\\frac{1}{t}p(x,t)=p^*(x)\\tqs for~\\mu-a.e.\\, x\\in X, \\end{equation*} then for μ-a.e. x ∈ X and any ε > 0, there holds the following tight control by p*(x): \\begin{equation*}{\\bf mes}\\left\\{t\\in{T}\\colon|p(x,t)-p^*(x)t|\\le\\varepsilon+ \\delta\\right\\}=\\infty, \\end{equation*} where mes{·} stands for the Lebesgue measure in the real line {R} or the counting measure in {Z} . This can be applied to the study of ergodic forced monotonic circle maps and of the normal numbers.

Developing A Radiation Protection Hub.

PubMed

Hertel, Nolan E

2017-02-01

The Where are the Radiation Professionals (WARP)? statement issued by the National Council on Radiation Protection and Measurements estimates that in 10 y, there will be a human capital crisis across the radiation safety community. The ability to respond to this shortage will be amplified by the fact that many radiation protection (health physics) academic programs will find it difficult to justify their continued existence since they are low-volume programs, both in terms of enrollment and research funding, compared to the research funding return and visibility of more highly subscribed and highly funded academic disciplines. In addition, across the national laboratory complex, radiation protection research groups have been disbanded or dramatically reduced in size. The loss of both of these national resources is being accelerated by low and uncertain government funding priorities. The most effective solution to this problem would be to form a consortium that would bring together the radiation protection research, academic, and training communities. The goal of such a consortium would be to engage in research, education, and training of the next generation of radiation protection professionals. Furthermore, the consortium could bring together the strengths of different universities, national laboratory programs, and other entities in a strategic manner to accomplish a multifaceted research, educational, and training agenda. This vision would forge a working and funded relationship between major research universities, national laboratories, 4-y degree institutions, technical colleges, and other partners.

Space Shuttle Orbiter flight heating rate measurement sensitivity to thermal protection system uncertainties

NASA Technical Reports Server (NTRS)

Bradley, P. F.; Throckmorton, D. A.

1981-01-01

A study was completed to determine the sensitivity of computed convective heating rates to uncertainties in the thermal protection system thermal model. Those parameters considered were: density, thermal conductivity, and specific heat of both the reusable surface insulation and its coating; coating thickness and emittance; and temperature measurement uncertainty. The assessment used a modified version of the computer program to calculate heating rates from temperature time histories. The original version of the program solves the direct one dimensional heating problem and this modified version of The program is set up to solve the inverse problem. The modified program was used in thermocouple data reduction for shuttle flight data. Both nominal thermal models and altered thermal models were used to determine the necessity for accurate knowledge of thermal protection system's material thermal properties. For many thermal properties, the sensitivity (inaccuracies created in the calculation of convective heating rate by an altered property) was very low.

40 CFR 600.509-12 - Voluntary submission of additional data.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Voluntary submission of additional data. 600.509-12 Section 600.509-12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Procedures for...

The Balloon Analog Insurance Task (BAIT): a behavioral measure of protective risk management.

PubMed

Essex, Brian G; Lejuez, Carl W; Qian, Rebecca Y; Bernstein, Katherine; Zald, David H

2011-01-01

Prior methods used to assess individual differences related to risk have not focused on an important component of risk management: how willing individuals are to pay for or take actions to insure what they already have. It is not clear whether this type of protective risk management taps into the same individual differences as does risk taking propensity measured by existing risk taking tasks. We developed a novel task to assess protective risk management, the Balloon Analog Insurance Task (BAIT), which is modeled after the Balloon Analog Risk Task (BART). In the BAIT, individuals are forced to decide how much money they are willing to pay in order to insure a specific fraction of their prior winnings given changing but imprecise levels of risk of monetary loss. Participants completed the BART and BAIT for real monetary rewards, and completed six self report questionnaires. The amount of insurance purchased on the BAIT was positively correlated with scores on the Intolerance of Uncertainty Scale and on the Checking scale of the revised Obsessive Compulsive Inventory. Conversely, the amount of insurance purchased was negatively correlated with scores on the Domain Specific Risk Taking Questionnaire, and on the Psychopathic Personality Inventory (PPI). Furthermore, relationships between insurance purchased and these scales remained significant after controlling for the BART in linear regression analyses, and the BART was only a significant predictor for measures on one scale--the PPI. Our results reveal that behavior on the BAIT taps into a number of individual differences that are not related to behavior on another measure of risk taking. We propose that the BAIT may provide a useful complement to the BART in the assessment of risk management style.

40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

Code of Federal Regulations, 2013 CFR

2013-07-01

... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

Code of Federal Regulations, 2010 CFR

2010-07-01

... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

Code of Federal Regulations, 2014 CFR

2014-07-01

... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

Code of Federal Regulations, 2012 CFR

2012-07-01

... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

Code of Federal Regulations, 2011 CFR

2011-07-01

... provided by the additive manufacturer. 79.21 Section 79.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.21 Information and assurances to be provided by the additive manufacturer. Each...

29 CFR 1917.95 - Other protective measures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... prevent employees from obtaining safe footing for their work. (2) PFDs (life preservers, life jackets, or.... (1) Employees performing work that requires special protective clothing shall be directed by the... handlers, who are engaged in work in which they may be pulled into the water: (i) When such employees are...

Influence of repetitive UVA stimulation on skin protection capacity and antioxidant efficacy.

PubMed

Rohr, Mathias; Rieger, Ingrid; Jain, Anil; Schrader, Andreas

2011-01-01

Topically applied antioxidants (AOs) are widely used in cosmetic products - especially in day and sun care - to help reduce oxidative stress caused by exogenous influences such as ultraviolet (UV) radiation. Despite several advances in recent years, little is known about the duration of protective effects by application of topical AOs, AO protection capacity (APC) or the activation of an endogenous protection capacity (EPC). By measuring oxidative-stress-induced photon emission of human skin in vivo with the ICL-S method (induced chemiluminescence of human skin), the protective effect of daily AO treatment for 2 weeks was examined on 4 consecutive days after treatment. UVA-dose-independent effects were investigated by decay curve intersection point analysis. In addition, chemiluminescence signal integration was used to investigate the influence of different UVA doses for stimulation on the determined APC as well as the modulation of the EPC by repetitive UVA stimulation both forming the skin protection capacity (SPC). The SPC showed a strong dependency on the UVA dose used for stimulation. AO pretreatment was more effective against lower UVA doses. Over the course of 4 days, the AO-induced SPC did not change significantly for a given UVA dose. Analyzing the decay curve intersection point for 2 different UVA doses, however, revealed a decrease in SPC with time. In addition, we found that a repetitive UVA irradiation of 1 J/cm(2) caused a statistically significant protective effect against UVA irradiation by stimulation of endogenous mechanisms. Topically supplemented AOs provide a protective effect against oxidative stress for at least 3 days, supporting their widespread use in cosmetic products. Especially their interaction with cutaneous protective mechanisms should be investigated in more detail for maximal protection, as endogenous defense mechanisms are already triggered by 2 low-dose UVA irradiations within 24 h. In summary, the in vivo measurement of UVA

Application of Phasor Measurement Units for Protection of Distribution Networks with High Penetration of Photovoltaic Sources

NASA Astrophysics Data System (ADS)

Meskin, Matin

comprehensive protective system is suggested at the end of the dissertation. The proposed method is based on the application of the phasor measurement unit (PMU) and the differential protection method. All of the current magnitudes and angles are collected by PMU and are sent to the phasor data concentrator (PDC), where a differential protection algorithm is applied to these data. If any fault is detected, the trip will be sent back to the corresponding circuit breakers across the network. Higher selectivity, sensitivity, and faster operation in the differential protection are superior to those of other protection schemes. Differential protection operates as unit protection, which means that it operates only when there is a fault in the protection zone. It does not function for faults occurring out of zone. Therefore, no coordination is required between differential protections across the power system. Moreover, the misoperation of this protective scheme is less likely as compared to other protection methods.

Protected Area Certificates: Gaining Ground for Better Ecosystem Protection?

NASA Astrophysics Data System (ADS)

Segerstedt, Anna; Grote, Ulrike

2015-06-01

Protected areas are vital to sustain a number of ecosystem services. Yet, many protected areas are underfinanced and lack management effectiveness. Protected area certificates have been suggested as a way to resolve these problems. This instrument would allow land managers to certify an area if it meets certain conservation criteria. The certificates could then be sold on an international market, for example to companies and any consumers that are interested in environmental protection. Some pilot initiatives have been launched, yet little is known about future demand and features of protected area certificates. To fill this knowledge gap, we conduct a choice experiment with close to 400 long-distance tourists from Germany as a potential group of buyers. Our results indicate that the respondents have the highest willingness to pay for certificates that conserve sensitive ecosystems and in addition to this lead to poverty reduction and safeguard water resources. For other attributes such as a greenhouse gas reduction, the preferences are less significant. Overall, the results are rather homogenous irrespective of where the protected areas are located. These insights are important for the future design and marketing of protected area certificates.

[Investigation of occupational hazards of ultraviolet radiation and protective measures for workers in electric welding].

PubMed

Xu, Yan; Gong, Man-man; Wang, Jiao; He, Li-hua; Wang, Sheng; Du, Wei-wei; Zhang, Long-lian; Lin, Sen; Dong, Xue-mei; Wang, Ru-gang

2012-06-18

To investigate and analyze the occupational hazards of ultraviolet radiation, protective measures and related factors for typical symptoms among workers in electric welding, and to provide basic information for revision of the occupational standards of UV. Questionnaires and physical examinations were used in this investigation. A total of 828 workers from four vehicle manufacturers in Beijing and Guangdong Province were selected. Corresponding analyses were conducted with SPSS 16.0 statistic software. The top three injuries of faces and hands were burning tingling (48.7% & 41.3%), itch of skin (39% & 34.9%) and pigmentation (31.9% & 24.5%).The major injuries of eyes were ophthalmodynia (61.5%) , photophobia and tearing (61.4%), and blurred vision (50.2%). The incidences of facial and hands burning tingling, hands flushing, hands macula and papula were significantly different between the welders and auxiliary workers (P<0.05). The differences of facial and hands burning tingling, flushing, facial disesthesia and anaesthesia, symptoms and signs of eyes were significant in different working years groups (P<0.05). The top three usages of protective measures were welding masks (87.2%), gloves (84.3%) and glasses (65.9%). Except for UV cut cream, the usages of other protective equipments in the auxiliary workers were significantly lower than those in the welders (P<0.05). The logistic regression analysis showed that prolonged exposure to arc welding, using argon arc welding and CO(2) gas shielded arc welding, not wearing welding masks, and not using UV cut cream was significantly associated with the increased risk of face burning tingling, and the ORs were 3.894 (6 h to 8 h), 2.665 (4 h to 6 h), 2.052, 1.765, 1.759, 1.833, respectively; working years might be a protective factor, and the OR was 0.440, respectively. The study suggested that the UV radiation produced during welding operations not only caused harm to welders, but also to the auxiliary workers. Protection

Interactions between spatially explicit conservation and management measures: implications for the governance of marine protected areas.

PubMed

Cárcamo, P Francisco; Gaymer, Carlos F

2013-12-01

Marine protected areas are not established in an institutional and governance vacuum and managers should pay attention to the wider social-ecological system in which they are immersed. This article examines Islas Choros-Damas Marine Reserve, a small marine protected area located in a highly productive and biologically diverse coastal marine ecosystem in northern Chile, and the interactions between human, institutional, and ecological dimensions beyond those existing within its boundaries. Through documents analysis, surveys, and interviews, we described marine reserve implementation (governing system) and the social and natural ecosystem-to-be-governed. We analyzed the interactions and the connections between the marine reserve and other spatially explicit conservation and/or management measures existing in the area and influencing management outcomes and governance. A top-down approach with poor stakeholder involvement characterized the implementation process. The marine reserve is highly connected with other spatially explicit measures and with a wider social-ecological system through various ecological processes and socio-economic interactions. Current institutional interactions with positive effects on the management and governance are scarce, although several potential interactions may be developed. For the study area, any management action must recognize interferences from outside conditions and consider some of them (e.g., ecotourism management) as cross-cutting actions for the entire social-ecological system. We consider that institutional interactions and the development of social networks are opportunities to any collective effort aiming to improve governance of Islas Choros-Damas marine reserve. Communication of connections and interactions between marine protected areas and the wider social-ecological system (as described in this study) is proposed as a strategy to improve stakeholder participation in Chilean marine protected areas.

Interactions Between Spatially Explicit Conservation and Management Measures: Implications for the Governance of Marine Protected Areas

NASA Astrophysics Data System (ADS)

Cárcamo, P. Francisco; Gaymer, Carlos F.

2013-12-01

Marine protected areas are not established in an institutional and governance vacuum and managers should pay attention to the wider social-ecological system in which they are immersed. This article examines Islas Choros-Damas Marine Reserve, a small marine protected area located in a highly productive and biologically diverse coastal marine ecosystem in northern Chile, and the interactions between human, institutional, and ecological dimensions beyond those existing within its boundaries. Through documents analysis, surveys, and interviews, we described marine reserve implementation (governing system) and the social and natural ecosystem-to-be-governed. We analyzed the interactions and the connections between the marine reserve and other spatially explicit conservation and/or management measures existing in the area and influencing management outcomes and governance. A top-down approach with poor stakeholder involvement characterized the implementation process. The marine reserve is highly connected with other spatially explicit measures and with a wider social-ecological system through various ecological processes and socio-economic interactions. Current institutional interactions with positive effects on the management and governance are scarce, although several potential interactions may be developed. For the study area, any management action must recognize interferences from outside conditions and consider some of them (e.g., ecotourism management) as cross-cutting actions for the entire social-ecological system. We consider that institutional interactions and the development of social networks are opportunities to any collective effort aiming to improve governance of Islas Choros-Damas marine reserve. Communication of connections and interactions between marine protected areas and the wider social-ecological system (as described in this study) is proposed as a strategy to improve stakeholder participation in Chilean marine protected areas.

40 CFR 63.1352 - Additional test methods.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 12 2014-07-01 2014-07-01 false Additional test methods. 63.1352... Monitoring and Compliance Provisions § 63.1352 Additional test methods. (a) If you are conducting tests to... manufacturing facilities, for use in applicability determinations under § 63.1340, you may use Method 320 or...

Cleaning and Cleanliness Measurement of Additive Manufactured Parts

NASA Technical Reports Server (NTRS)

Mitchell, Mark A.; Edwards, Kevin; Fox, Eric; Boothe, Richard

2017-01-01

Additive Manufacturing processes allow for the manufacture of complex three dimensional components that otherwise could not be manufactured. Post treatment processes require the removal of any remnant bulk powder that may become entrapped within small cavities and channels within a component. This project focuses on several gross cleaning methods and the verification metrics associated with additive manufactured parts for oxygen propulsion usage.

The Balloon Analog Insurance Task (BAIT): A Behavioral Measure of Protective Risk Management

PubMed Central

Essex, Brian G.; Lejuez, Carl W.; Qian, Rebecca Y.; Bernstein, Katherine; Zald, David H.

2011-01-01

Prior methods used to assess individual differences related to risk have not focused on an important component of risk management: how willing individuals are to pay for or take actions to insure what they already have. It is not clear whether this type of protective risk management taps into the same individual differences as does risk taking propensity measured by existing risk taking tasks. We developed a novel task to assess protective risk management, the Balloon Analog Insurance Task (BAIT), which is modeled after the Balloon Analog Risk Task (BART). In the BAIT, individuals are forced to decide how much money they are willing to pay in order to insure a specific fraction of their prior winnings given changing but imprecise levels of risk of monetary loss. Participants completed the BART and BAIT for real monetary rewards, and completed six self report questionnaires. The amount of insurance purchased on the BAIT was positively correlated with scores on the Intolerance of Uncertainty Scale and on the Checking scale of the revised Obsessive Compulsive Inventory. Conversely, the amount of insurance purchased was negatively correlated with scores on the Domain Specific Risk Taking Questionnaire, and on the Psychopathic Personality Inventory (PPI). Furthermore, relationships between insurance purchased and these scales remained significant after controlling for the BART in linear regression analyses, and the BART was only a significant predictor for measures on one scale - the PPI. Our results reveal that behavior on the BAIT taps into a number of individual differences that are not related to behavior on another measure of risk taking. We propose that the BAIT may provide a useful complement to the BART in the assessment of risk management style. PMID:21738666

40 CFR 51.117 - Additional provisions for lead.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 2 2013-07-01 2013-07-01 false Additional provisions for lead. 51.117... Additional provisions for lead. In addition to other requirements in §§ 51.100 through 51.116 the following requirements apply to lead. To the extent they conflict, there requirements are controlling over those of the...

40 CFR 51.117 - Additional provisions for lead.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 2 2014-07-01 2014-07-01 false Additional provisions for lead. 51.117... Additional provisions for lead. In addition to other requirements in §§ 51.100 through 51.116 the following requirements apply to lead. To the extent they conflict, there requirements are controlling over those of the...

40 CFR 51.117 - Additional provisions for lead.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 2 2012-07-01 2012-07-01 false Additional provisions for lead. 51.117... Additional provisions for lead. In addition to other requirements in §§ 51.100 through 51.116 the following requirements apply to lead. To the extent they conflict, there requirements are controlling over those of the...

40 CFR 51.117 - Additional provisions for lead.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 2 2011-07-01 2011-07-01 false Additional provisions for lead. 51.117... Additional provisions for lead. In addition to other requirements in §§ 51.100 through 51.116 the following requirements apply to lead. To the extent they conflict, there requirements are controlling over those of the...

Examining Self-Protection Measures Guarding Adult Protective Services Social Workers against Compassion Fatigue

ERIC Educational Resources Information Center

Bourassa, Dara

2012-01-01

Little research has focused on the risk factors, effects, and experiences of compassion fatigue among gerontological social workers. This qualitative study explores the experiences and perspectives of nine Adult Protective Services (APS) social workers in relation to compassion fatigue. Results show that the APS social workers combined personal…

Evaluation of Thermal Protection Tile Transmissibility for Ground Vibration Test

NASA Technical Reports Server (NTRS)

Chung, Y. T.; Fowler, Samuel B.; Lo, Wenso; Towner, Robert

2005-01-01

Transmissibility analyses and tests were conducted on a composite panel with thermal protection system foams to evaluate the quality of the measured frequency response functions. Both the analysis and the test results indicate that the vehicle dynamic responses are fully transmitted to the accelerometers mounted on the thermal protection system in the normal direction below a certain frequency. In addition, the in-plane motions of the accelerometer mounted on the top surface of the thermal protection system behave more actively than those on the composite panel due to the geometric offset of the accelerometer from the panel in the test set-up. The transmissibility tests and analyses show that the frequency response functions measured from the accelerometers mounted on the TPS will provide accurate vehicle responses below 120 Hz for frequency and mode shape identification. By confirming that accurate dynamic responses below a given frequency can be obtained, this study increases the confidence needed for conducting the modal testing, model correlation, and model updating for a vehicle installed with TPS. '

Comparison of usual and alternative methods to measure height in mechanically ventilated patients: potential impact on protective ventilation.

PubMed

Bojmehrani, Azadeh; Bergeron-Duchesne, Maude; Bouchard, Carmelle; Simard, Serge; Bouchard, Pierre-Alexandre; Vanderschuren, Abel; L'Her, Erwan; Lellouche, François

2014-07-01

Protective ventilation implementation requires the calculation of predicted body weight (PBW), determined by a formula based on gender and height. Consequently, height inaccuracy may be a limiting factor to correctly set tidal volumes. The objective of this study was to evaluate the accuracy of different methods in measuring heights in mechanically ventilated patients. Before cardiac surgery, actual height was measured with a height gauge while subjects were standing upright (reference method); the height was also estimated by alternative methods based on lower leg and forearm measurements. After cardiac surgery, upon ICU admission, a subject's height was visually estimated by a clinician and then measured with a tape measure while the subject was supine and undergoing mechanical ventilation. One hundred subjects (75 men, 25 women) were prospectively included. Mean PBW was 61.0 ± 9.7 kg, and mean actual weight was 30.3% higher. In comparison with the reference method, estimating the height visually and using the tape measure were less accurate than both lower leg and forearm measurements. Errors above 10% in calculating the PBW were present in 25 and 40 subjects when the tape measure or visual estimation of height was used in the formula, respectively. With lower leg and forearm measurements, 15 subjects had errors above 10% (P < .001). Our results demonstrate that significant variability exists between the different methods used to measure height in bedridden patients on mechanical ventilation. Alternative methods based on lower leg and forearm measurements are potentially interesting solutions to facilitate the accurate application of protective ventilation. Copyright © 2014 by Daedalus Enterprises.

Protective Action Guides (PAGs)

EPA Pesticide Factsheets

The Protective Action Guide (PAG) manual contains radiation dose guidelines that would trigger public safety measures. EPA developed Protective Action Guides to help responders plan for radiation emergencies.

Formalin-Inactivated Coxiella burnetii Phase I Vaccine-Induced Protection Depends on B Cells To Produce Protective IgM and IgG

PubMed Central

Peng, Ying; Schoenlaub, Laura; Elliott, Alexandra; Mitchell, William; Zhang, Yan

2013-01-01

To further understand the mechanisms of formalin-inactivated Coxiella burnetii phase I (PI) vaccine (PIV)-induced protection, we examined if B cell, T cell, CD4+ T cell, or CD8+ T cell deficiency in mice significantly affects the ability of PIV to confer protection against a C. burnetii infection. Interestingly, compared to wild-type (WT) mice, PIV conferred comparable levels of protection in CD4+ T cell- or CD8+ T cell-deficient mice and partial protection in T cell-deficient mice but did not provide measurable protection in B cell-deficient mice. These results suggest that PIV-induced protection depends on B cells. In addition, anti-PI-specific IgM was the major detectable antibody (Ab) in immune sera from PIV-vaccinated CD4+ T cell-deficient mice, and passive transfer of immune sera from PIV-vaccinated CD4+ T cell-deficient mice conferred significant protection. These results suggest that T cell-independent anti-PI-specific IgM may contribute to PIV-induced protection. Our results also suggested that PIV-induced protection may not depend on complement activation and Fc receptor-mediated effector functions. Furthermore, our results demonstrated that both IgM and IgG from PIV-vaccinated WT mouse sera were able to inhibit C. burnetii infection in vivo, but only IgM from PIV-vaccinated CD4+ T cell-deficient mouse sera inhibited C. burnetii infection. Collectively, these findings suggest that PIV-induced protection depends on B cells to produce protective IgM and IgG and that T cell-independent anti-PI-specific IgM may play a critical role in PIV-induced protection against C. burnetii infection. PMID:23545296

40 CFR 80.46 - Measurement of reformulated gasoline fuel parameters.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Measurement of reformulated gasoline... (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Reformulated Gasoline § 80.46 Measurement of reformulated gasoline fuel parameters. (a) Sulfur. Sulfur content of gasoline and butane must...

40 CFR 80.46 - Measurement of reformulated gasoline fuel parameters.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Measurement of reformulated gasoline... (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Reformulated Gasoline § 80.46 Measurement of reformulated gasoline fuel parameters. (a) Sulfur. Sulfur content of gasoline and butane must...

40 CFR 80.46 - Measurement of reformulated gasoline fuel parameters.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Measurement of reformulated gasoline... (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Reformulated Gasoline § 80.46 Measurement of reformulated gasoline fuel parameters. (a) Sulfur. Sulfur content of gasoline and butane must...

A Measure of the Forest Protected Areas Benefits for the Surrounding Population: A Case Study of the Bouaflé Protected Forest (CÔTE D'IVOIRE)

NASA Astrophysics Data System (ADS)

Kouame, B. N. P.

2015-12-01

Côte d'Ivoire located in West Africa, registers high level of biodiversity which occurs mainly in forest land. The country has suffered severe deforestation. However, deforestation and forest degradation release Greenhouse Gases into the atmosphere which contributes to Climate Change. In order to address the deforestation, many actions are taken, one of which is the implementation of protected areas within countries. These measures put restrictions on the access of local communities to forest services. However, local communities supplement their daily livelihood from forests, especially from timber and non-timber forest products. What are the effects of forests conservation in protected areas on surrounding population? This study focuses on the Bouaflé protected forest (foret classée de Bouaflé) in the western part of Côte d'Ivoire. The forest is 20350 ha and was made a protected forest in 1974. It is one of the most deforested protected areas in the country. Firstly, we described the perception of forest benefits by the population. Secondly, we estimated the benefits of forest conservation using a contingent valuation approach, particularly the Willingness to Pay (WTP) methodology. From our sample size of 156 households, it appears that most of the individuals are aware of the importance of the forest (94 % against 6%). According to the estimate of the benefits, it results on average, people are willing to pay 1658.491F CFA (2.53 Euros). The median WTP is 1000 FCFA. This study will be helpful by adding to the scientific literature and for inducing local people implication in conservation.

On Bayesian Testing of Additive Conjoint Measurement Axioms Using Synthetic Likelihood.

PubMed

Karabatsos, George

2018-06-01

This article introduces a Bayesian method for testing the axioms of additive conjoint measurement. The method is based on an importance sampling algorithm that performs likelihood-free, approximate Bayesian inference using a synthetic likelihood to overcome the analytical intractability of this testing problem. This new method improves upon previous methods because it provides an omnibus test of the entire hierarchy of cancellation axioms, beyond double cancellation. It does so while accounting for the posterior uncertainty that is inherent in the empirical orderings that are implied by these axioms, together. The new method is illustrated through a test of the cancellation axioms on a classic survey data set, and through the analysis of simulated data.

[Gonad protective effect of radiation protective apron in chest radiography].

PubMed

Hashimoto, Masatoshi; Kato, Hideyuki; Fujibuchi, Toshiou; Ochi, Shigehiro; Morita, Fuminori

2004-12-01

Depending on the facility, a radiation protective apron (protector) is used to protect the gonad from radiation exposure in chest radiography. To determine the necessity of using a protector during chest radiography, we measured the effect of the protector on the gonad in this study. First, using a human body phantom, we measured the absorbed dose of the female gonad with and without the protector, using a thermoluminescence dosimeter (TLD), and confirmed its protective effect. Using the protector, the absorbed dose was reduced to 28+/-2% and 39+/-4% for field sizes of 14 x 17 inch and 14 x 14 inch, respectively. Next, we used Monte Carlo simulation and confirmed, not only the validity of the actual measurement values, but also the fact that the influence of radiation on the absorbed dose of the gonad was mostly from scattered radiation from inside the body for the 14 x 17 inch field size, and also from the X-ray tube for the 14 x 14 inch field size. Although a certain protective effect is achieved by using the protector, the radiation dose to the gonad is only a few microGy even without a protector. Thus, the risk of a genetic effect would be as small as 10(-8). Given that acceptable risk is below 10(-6), we conclude the use of a radiation protective apron is not necessary for diagnostic chest radiography.

Multiwall thermal protection system

NASA Technical Reports Server (NTRS)

Jackson, L. R. (Inventor)

1982-01-01

Multiwall insulating sandwich panels are provided for thermal protection of hypervelocity vehicles and other enclosures. In one embodiment, the multiwall panels are formed of alternate layers of dimpled and flat metal (titanium alloy) foil sheets and beaded scarfed edge seals to provide enclosure thermal protection up to 1000 F. An additional embodiment employs an intermediate fibrous insulation for the sandwich panel to provide thermal protection up to 2000 F. A third embodiment employs a silicide coated columbium waffle as the outer panel skin and fibrous layered intermediate protection for thermal environment protection up to 2500 F. The use of multiple panels on an enclosure facilitate repair and refurbishment of the thermal protection system due to the simple support provided by the tab and clip attachment for the panels.

30 CFR 57.5046 - Protection against radon gas.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Protection against radon gas. 57.5046 Section... Protection against radon gas. Where radon daughter concentrations exceed 10 WL, respirator protection against radon gas shall be provided in addition to protection against radon daughters. Protection against radon...

14 CFR 29.1419 - Ice protection.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Ice protection. 29.1419 Section 29.1419... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Safety Equipment § 29.1419 Ice protection. (a) To obtain... of the ice protection system for the various components of the rotorcraft. (c) In addition to the...

14 CFR 29.1419 - Ice protection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ice protection. 29.1419 Section 29.1419... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Safety Equipment § 29.1419 Ice protection. (a) To obtain... of the ice protection system for the various components of the rotorcraft. (c) In addition to the...

14 CFR 29.1419 - Ice protection.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Ice protection. 29.1419 Section 29.1419... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Safety Equipment § 29.1419 Ice protection. (a) To obtain... of the ice protection system for the various components of the rotorcraft. (c) In addition to the...

14 CFR 29.1419 - Ice protection.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Ice protection. 29.1419 Section 29.1419... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Safety Equipment § 29.1419 Ice protection. (a) To obtain... of the ice protection system for the various components of the rotorcraft. (c) In addition to the...

14 CFR 29.1419 - Ice protection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Ice protection. 29.1419 Section 29.1419... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Safety Equipment § 29.1419 Ice protection. (a) To obtain... of the ice protection system for the various components of the rotorcraft. (c) In addition to the...

Practical aspects of handling data protection and data security.

PubMed

Louwerse, C P

1991-01-01

Looking at practical applications of health care information systems, we must conclude that in the field of data protection there still is too large a gap between what is feasible and necessary on one hand, and what is achieved in actual realizations on the other. To illustrate this point, we sketch the actual data protection measures in a large hospital information system, and describe the effects of changes affecting the system, such as increasing use of personal computers, and growing intensity of use of the system. Trends in the development of new and additional systems are indicated, and a summary of possible weak points and gaps in the security is given, some suggestions for improvement are made.

Polyfibroblast: A Self-Healing and Galvanic Protection Additive

DTIC Science & Technology

2011-09-27

TESTING 8 3.5 ADHESION OF SPRAY COATINGS WITH MICROCAPSULES 8 3.6 CONTROLLING METAL COMPOSITION 9 3.7 SHEAR STRESS TESTING 9 Polyfibroblast...observed self-healing in real time using electrochemical impedance spectroscopy, we now show through this same technique the importance of the microcapsules ...OTS rich microcapsules have an improved shelf-life in comparison to polyurethane resin-filled microcapsules . Salt spray measurements, now completed

Measurement Tools for Integrated Worker Health Protection and Promotion: Lessons Learned From the SafeWell Project.

PubMed

Pronk, Nicolaas P; McLellan, Deborah L; McGrail, Michael P; Olson, Shawn M; McKinney, Zeke J; Katz, Jeffrey N; Wagner, Gregory R; Sorensen, Glorian

2016-07-01

To describe (a) a conceptual approach, (b) measurement tools and data collection processes, (c) characteristics of an integrated feedback report and action plan, and (d) experiences of three companies with an integrated measurement approach to worker safety and health. Three companies implemented measurement tools designed to create an integrated view of health protection and promotion based on organizational- and individual-level assessments. Feedback and recommended actions were presented following assessments at baseline and 1-year follow-up. Measurement processes included group dialogue sessions, walk-through, online surveys, and focus groups. The approach and measurement tools generated actionable recommendations and documented changes in the physical (eg, safety hazards) and psychosocial (eg, health and safety culture) work environment between baseline and 1-year follow-up. The measurement tools studied were feasible, acceptable, and meaningful to companies in the SafeWell study.

Additive Manufacturing: From Form to Function

DTIC Science & Technology

2016-01-01

embedded electronics in clothing that could allow additional protective benefits and health monitoring options.13 AM has also enabled proof-of-concept...the International Space Station (ISS) in September 2014 to test plastics . The second 3D printer was delivered to the ISS in April 2016. In addition...was developed by the Innovative Advanced Concepts program. The sensor is essentially a transparent sheet of plastic with printed elec- tronics that

40 CFR 141.154 - Required additional health information.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

40 CFR 141.154 - Required additional health information.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

40 CFR 141.154 - Required additional health information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

40 CFR 141.154 - Required additional health information.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of...

Effectiveness of skin protection measures in prevention of occupational hand eczema: results of a prospective randomized controlled trial over a follow-up period of 1 year.

PubMed

Kütting, B; Baumeister, T; Weistenhöfer, W; Pfahlberg, A; Uter, W; Drexler, H

2010-02-01

We recently found a very low adherence to a generally recommended skin protection regimen in a sample of 1355 metalworkers. The present study assessed the effectiveness of skin protection as presently recommended, especially the differential contribution of skin care and skin protection, to the prevention of occupational hand eczema. Methods Of 1355 metalworkers screened, 1020 male volunteers, all fit for work, were recruited for a prospective intervention study with four arms (skin care, skin protection, both combined, and control group, i.e. no recommendation). The study was performed from winter 2006/2007 to spring 2008, following each subject for up for 12 months. Both hands were examined using a quantitative skin score, and a standardized personal interview was performed three times. The change of the objective skin score from baseline to 12 months was used as primary outcome measure. After 12 months 800 subjects were included (78.4% of those recruited). The compliance to follow the randomized measure depended on the recommended measure and ranged from 73.7% to 88.7%. While in the control group a significant deterioration was found, the largest and significant improvement was noted in the group following the generally recommended skin protection programme (skin care + skin protection) followed by skin protection alone as second best. The generally recommended skin protection regimen seems to provide effective prevention of occupational skin disease. Therefore, the compliance to follow the skin protection regimen, especially the use of skin protection, should be enhanced.

Protection against oxidation of fish-oil-enriched milk emulsions through addition of rapeseed oil or antioxidants.

PubMed

Let, Mette B; Jacobsen, Charlotte; Pham, Kim A; Meyer, Anne S

2005-06-29

The ability of rapeseed oil and/or different antioxidants (alpha- and gamma-tocopherol mixture, ascorbyl palmitate, and EDTA) to protect fish-oil-enriched milk emulsions against oxidation was investigated. Tocopherol isomers in concentrations similar to those found in natural rapeseed oil were added to rapeseed oil stripped of natural tocopherols. The rapeseed oil with added tocopherols significantly inhibited oxidation in the fish-oil-enriched milk emulsions. In contrast, the emulsions with only fish oil and added alpha- and gamma-tocopherol were less stable than the emulsions with fish oil alone. When added individually, the gamma-tocopherol seemed to inhibit oxidation more efficiently than alpha-tocopherol. Ascorbyl palmitate (AP) almost completely retarded oxidation in the fish-oil-enriched milk emulsions, as determined by PV, volatile oxidation products, and sensory evaluation. AP also prevented the otherwise prooxidant effect of tocopherols added to fish oil before emulsification. No interactions between AP, tocopherols, and EDTA were observed, and EDTA added alone to fish oil did not show antioxidant properties in the milk emulsions. Overall, the results showed that addition of AP or rapeseed oil containing natural tocopherols to fish oil was equally efficient in inhibiting oxidation in the fish-oil-enriched milk emulsions.

Application of the diagnostic radiological index of protection to protective garments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pasciak, Alexander S.; Jones, A. Kyle, E-mail: kyle.jones@mdanderson.org; Wagner, Louis K.

2015-02-15

Purpose: Previously, the diagnostic radiological index of protection (DRIP) was proposed as a metric for quantifying the protective value of radioprotective garments. The DRIP is a weighted sum of the percent transmissions of different radiation beams through a garment. Ideally, the beams would represent the anticipated stray radiation encountered during clinical use. However, it is impractical to expect a medical physicist to possess the equipment necessary to accurately measure transmission of scattered radiation. Therefore, as a proof of concept, the authors tested a method that applied the DRIP to clinical practice. Methods: Primary beam qualities used in interventional cardiology andmore » radiology were observed and catalogued. Based on the observed range of beam qualities, five representative clinical primary beam qualities, specified by kV and added filtration, were selected for this evaluation. Monte Carlo simulations were performed using these primary beams as source definitions to generate scattered spectra from the clinical primary beams. Using numerical optimization, ideal scatter mimicking primary beams, specified by kV and added aluminum filtration, were matched to the scattered spectra according to half- and quarter-value layers and spectral shape. To within reasonable approximation, these theoretical scatter-mimicking primary beams were reproduced experimentally in laboratory x ray beams and used to measure transmission through pure lead and protective garments. For this proof of concept, the DRIP for pure lead and the garments was calculated by assigning equal weighting to percent transmission measurements for each of the five beams. Finally, the areal density of lead and garments was measured for consideration alongside the DRIP to assess the protective value of each material for a given weight. Results: The authors identified ideal scatter mimicking primary beams that matched scattered spectra to within 0.01 mm for half- and quarter

Item Randomized-Response Models for Measuring Noncompliance: Risk-Return Perceptions, Social Influences, and Self-Protective Responses

ERIC Educational Resources Information Center

Bockenholt, Ulf; Van Der Heijden, Peter G. M.

2007-01-01

Randomized response (RR) is a well-known method for measuring sensitive behavior. Yet this method is not often applied because: (i) of its lower efficiency and the resulting need for larger sample sizes which make applications of RR costly; (ii) despite its privacy-protection mechanism the RR design may not be followed by every respondent; and…

[Telematics in the public health sector. Where is the protection of health data?].

PubMed

Voßhoff, Andrea; Raum, Bertram; Ernestus, Walter

2015-10-01

There is a long history of telematics in the German health system. Apart from the growing technical possibilities in the field, it is important to concentrate on the protection of health data in telematics applications. Health data in the hands of service providers or other third parties entails certain risks for the patient's personality rights, because these institutions may not be bound by the practice of medical confidentiality. In addition, big data processing risks make the individual lives of patients and insured persons totally transparent. Measures to reduce these risks have to be taken by the providers as well as by the users of telematics infrastructure; they are the ones who should explicitly address the relevant risks and dangers in a data protection and IT-security concept and develop adequate strategies to cope with these dangers. Additionally, the German legislator remains obliged to create a regulatory framework for the protection of patients' rights.

Protecting the Library and Its Resources. A Guide to Physical Protection and Insurance.

ERIC Educational Resources Information Center

Johnson, Edward M., Ed.

The first part of this manual contains information about providing physical protection for libraries and is organized into the following chapters--(1) types of physical losses, (2) the prevention of losses, (3) fire defense measures, (4) fire protection equipment, and (5) fire protection in library planning. The second part is concerned with…

Socio-economic and ecological impacts of global protected area expansion plans

PubMed Central

Visconti, Piero; Bakkenes, Michel; Smith, Robert J.; Joppa, Lucas; Sykes, Rachel E.

2015-01-01

Several global strategies for protected area (PA) expansion have been proposed to achieve the Convention on Biological Diversity's Aichi target 11 as a means to stem biodiversity loss, as required by the Aichi target 12. However, habitat loss outside PAs will continue to affect habitats and species, and PAs may displace human activities into areas that might be even more important for species persistence. Here we measure the expected contribution of PA expansion strategies to Aichi target 12 by estimating the extent of suitable habitat available for all terrestrial mammals, with and without additional protection (the latter giving the counterfactual outcome), under different socio-economic scenarios and consequent land-use change to 2020. We found that expanding PAs to achieve representation targets for ecoregions under a Business-as-usual socio-economic scenario will result in a worse prognosis than doing nothing for more than 50% of the world's terrestrial mammals. By contrast, targeting protection towards threatened species can increase the suitable habitat available to over 60% of terrestrial mammals. Even in the absence of additional protection, an alternative socio-economic scenario, adopting progressive changes in human consumption, leads to positive outcomes for mammals globally and to the largest improvements for wide-ranging species. PMID:26460136

Socio-economic and ecological impacts of global protected area expansion plans.

PubMed

Visconti, Piero; Bakkenes, Michel; Smith, Robert J; Joppa, Lucas; Sykes, Rachel E

2015-11-05

Several global strategies for protected area (PA) expansion have been proposed to achieve the Convention on Biological Diversity's Aichi target 11 as a means to stem biodiversity loss, as required by the Aichi target 12. However, habitat loss outside PAs will continue to affect habitats and species, and PAs may displace human activities into areas that might be even more important for species persistence. Here we measure the expected contribution of PA expansion strategies to Aichi target 12 by estimating the extent of suitable habitat available for all terrestrial mammals, with and without additional protection (the latter giving the counterfactual outcome), under different socio-economic scenarios and consequent land-use change to 2020. We found that expanding PAs to achieve representation targets for ecoregions under a Business-as-usual socio-economic scenario will result in a worse prognosis than doing nothing for more than 50% of the world's terrestrial mammals. By contrast, targeting protection towards threatened species can increase the suitable habitat available to over 60% of terrestrial mammals. Even in the absence of additional protection, an alternative socio-economic scenario, adopting progressive changes in human consumption, leads to positive outcomes for mammals globally and to the largest improvements for wide-ranging species. © 2015 The Author(s).

75 FR 1355 - Procurement List Additions and Deletions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-11

...: Additions to and deletions from Procurement List. SUMMARY: This action adds to the Procurement List services... disabilities, and deletes from the Procurement List products and services previously furnished by such agencies... [email protected] . SUPPLEMENTARY INFORMATION: Additions On 11/6/2009 (74 FR 57453-57454), the...

Taking Steps to Protect Against the Insider Threat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pope, Noah Gale; Williams, Martha; Lewis, Joel

2015-10-16

Research reactors are required (in accordance with the Safeguards Agreement between the State and the IAEA) to maintain a system of nuclear material accounting and control for reporting quantities of nuclear material received, shipped, and held on inventory. Enhancements to the existing accounting and control system can be made at little additional cost to the facility, and these enhancements can make nuclear material accounting and control useful for nuclear security. In particular, nuclear material accounting and control measures can be useful in protecting against an insider who is intent on unauthorized removal or misuse of nuclear material or misuse ofmore » equipment. An enhanced nuclear material accounting and control system that responds to nuclear security is described in NSS-25G, Use of Nuclear Material Accounting and Control for Nuclear Security Purposes at Facilities, which is scheduled for distribution by the IAEA Department of Nuclear Security later this year. Accounting and control measures that respond to the insider threat are also described in NSS-33, Establishing a System for Control of Nuclear Material for Nuclear Security Purposes at a Facility During Storage, Use and Movement, and in NSS-41, Preventive and Protective Measures against Insider Threats (originally issued as NSS-08), which are available in draft form. This paper describes enhancements to existing material control and accounting systems that are specific to research reactors, and shows how they are important to nuclear security and protecting against an insider.« less

Non-additivity of molecule-surface van der Waals potentials from force measurements.

PubMed

Wagner, Christian; Fournier, Norman; Ruiz, Victor G; Li, Chen; Müllen, Klaus; Rohlfing, Michael; Tkatchenko, Alexandre; Temirov, Ruslan; Tautz, F Stefan

2014-11-26

Van der Waals (vdW) forces act ubiquitously in condensed matter. Despite being weak on an atomic level, they substantially influence molecular and biological systems due to their long range and system-size scaling. The difficulty to isolate and measure vdW forces on a single-molecule level causes our present understanding to be strongly theory based. Here we show measurements of the attractive potential between differently sized organic molecules and a metal surface using an atomic force microscope. Our choice of molecules and the large molecule-surface separation cause this attraction to be purely of vdW type. The experiment allows testing the asymptotic vdW force law and its validity range. We find a superlinear growth of the vdW attraction with molecular size, originating from the increased deconfinement of electrons in the molecules. Because such non-additive vdW contributions are not accounted for in most first-principles or empirical calculations, we suggest further development in that direction.

PROTECTIVE CLOTHING BASED ON PERMSELECTIVE MEMBRANE AND CARBON ADSORPTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.G. Wijmans; J.O. Stull

2001-11-07

The goal of this project was to develop chemical protective clothing for use by DOE decontamination and decommissioning workers that is sufficiently water vapor permeable to keep the workers cool, thereby enhancing their productivity. This report describes the results of Phase II of a two-phase project to complete development of the novel permselective material and to test protective clothing made from the fabric. In Phase I a novel material incorporating a nonporous hydrophilic polyvinylacohol (PVA) layer, which is water vapor permeable but relatively impermeable to organic vapors, was developed. The results of the Phase I tests showed that the chemicalmore » resistance of the MTR material is comparable to that of Saranex/Tyvek materials, and that the comfort properties are closer to those of Tyvek (as measured in terms of CLO and permeability). Chemical resistance was measured using permeation tests against liquid dichloromethane. Comfort properties were ascertained by measuring the water vapor transmission of the material and by sweating manikin tests on whole protective suits. In addition, a cost/benefit analysis demonstrated that use of MTR's material technology could result in significant improvements in work productivity and cost savings if protective clothing items made from the new material were used more than once. In Phase II, MTR undertook a program to optimize the performance and production engineering for the new material technology. A partnership was formed with Kimberly-Clark Corporation to assist with a detailed evaluation of the MTR technology, and MTR used the services of Mr. Jeff Stull, President of the consulting firm International Personnel Protection, Inc., who conducted a detailed economic and application analysis for the developed fabric. The protective fabric manufacturing steps were simplified significantly, resulting in a 30% reduction in manufacturing costs and eliminating the necessity for capital investment in production equipment

Planetary Protection Considerations for Life Support and Habitation Systems

NASA Technical Reports Server (NTRS)

Barta, Daniel J.; Hogan, John A.

2010-01-01

Life support systems for future human missions beyond low Earth orbit may include a combination of existing hardware components and advanced technologies. Discipline areas for technology development include atmosphere revitalization, water recovery, solid waste management, crew accommodations, food production, thermal systems, environmental monitoring, fire protection and radiation protection. Life support systems will be influenced by in situ resource utilization (ISRU), crew mobility and the degree of extravehicular activity. Planetary protection represents an additional set of requirements that technology developers have generally not considered. Planetary protection guidelines will affect the kind of operations, processes, and functions that can take place during future exploration missions, including venting and discharge of liquids and solids, ejection of wastes, use of ISRU, requirements for cabin atmospheric trace contaminant concentrations, cabin leakage and restrictions on what materials, organisms, and technologies that may be brought on missions. Compliance with planetary protection requirements may drive development of new capabilities or processes (e.g. in situ sterilization, waste containment, contaminant measurement) and limit or prohibit certain kinds of operations or processes (e.g. unfiltered venting). Ultimately, there will be an effect on mission costs, including the mission trade space. Planetary protection requirements need to be considered early in technology development programs. It is expected that planetary protection will have a major impact on technology selection for future missions.

Polyfibroblast: A Self-Healing and Galvanic Protection Additive

DTIC Science & Technology

2013-09-25

Specifically we looked at emulsifier (Gum Arabic vs. SiC^), polymer-forming monomer (IPDI vs. BCI ), silane molecular weight (C12 vs. C18 vs. C8-C18...le+6J tu ie+4- le+2 U le+0 ■ Coating ■ Scratch BCI IPDI Isocyanate Type ICoating |Scratch Figure 3: A) Corrosion resistance of the...surprising. The type of monomer also did not appear to matter in these measurements. Whether polymerized from IPDI or BCI , the extent of self-healing

Dose-dependent folic acid and memantine treatments promote synergistic or additive protection against Aβ(25-35) peptide-induced apoptosis in SH-SY5Y cells mediated by mitochondria stress-associated death signals.

PubMed

Chen, Ta-Fu; Tang, Ming-Chi; Chou, Chia-Hui; Chiu, Ming-Jang; Huang, R-F S

2013-12-01

Increased dietary folic acid (FA) is associated with reduced risks of Alzheimer's disease (AD). The AD drug memantine (Mn) has had limited therapeutic effects for the treatment of patients with moderate to severe AD. This study investigated whether and the underlying mechanisms by which the combination of Mn and FA may have synergistic or additive effects in protecting against amyloid-β(25-35) peptide (Aβ)-induced neurocytotoxicity. Aβ treatment of human neuroblastoma SH-SY5Y cells significantly induced a 6-fold increase of apoptotic cells compared with the Aβ-untreated group. Preincubation of Aβ-exposed cells with FA (500 μM) or Mn (20 μM) caused a 22% and 10% reduction of apoptotic cells, respectively, whereas the combo-treatments at such doses synergistically alleviated Aβ-induced apoptosis by 60% (P<0.05). The apoptotic protection by the combo-treatments coincided with attenuating Aβ-elicited mitochondrial (mt) membrane depolarization and abolishing Aβ-induced mt cytochrome c release to the cytosol. Increased levels of FA at 1000 μM in combination with 20 μM Mn exerted an additive protection against Aβ(25-35)-induced-apoptosis as compared to the isolate Mn group (P<0.05). The combo-treatments reversed Aβ-elicited mt membrane depolarization, attenuated Aβ-elicited mt cytochrome c release to the cytosol, and diminished Aβ-promoted superoxide generation. The apoptotic-protection by such combo-treatments was partially abolished by carbonyl cyanide 3-chlorophenylhydrazone (mt membrane potential uncoupler) and sodium azide (mt cytochrome c oxidase inhibitor). Taken together, the data demonstrated that dose-dependent FA and Mn synergistically or additively protected SH-SY5Y cells against Aβ-induced apoptosis, which was partially, if not completely, mediated by mt stress-associated death signals. Copyright © 2013 Elsevier Ltd. All rights reserved.

Ethanol adaptation induces direct protection and cross-protection against freezing stress in Salmonella enterica serovar Enteritidis.

PubMed

He, S; Zhou, X; Shi, C; Shi, X

2016-03-01

Salmonella enterica serovar Enteritidis (Salm. Enteritidis) encounters mild ethanol stress during its life cycle. However, adaptation to a stressful condition may affect bacterial resistance to subsequent stresses. Hence, this work was undertaken to investigate the influences of ethanol adaptation on stress tolerance of Salm. Enteritidis. Salmonella Enteritidis was subjected to different ethanol adaptation treatments (2·5-10% ethanol for 1 h). Cellular morphology and tolerance to subsequent environmental stresses (15% ethanol, -20°C, 4°C, 50°C and 10% NaCl) were evaluated. It was found that 10% was the maximum ethanol concentration that allowed growth of the target bacteria. Ethanol adaptation did not cause cell-surface damage in Salm. Enteritidis as revealed by membrane permeability measurements and electron micrograph analysis. Salmonella Enteritidis adapted with 2·5-10% ethanol displayed an enhanced resistance to a 15%-ethanol challenge compared with an unchallenged control. The maximum ethanol resistance was observed when ethanol concentration used for ethanol adaptation was increased to 5·0%. Additionally, pre-adaptation to 5·0% ethanol cross-protected Salm. Enteritidis against -20°C, but not against 4°C, 50°C or 10% NaCl. Ethanol adaptation provided Salm. Enteritidis direct protection from a high level ethanol challenge and cross-protection from freezing, but not other stresses tested (low temperature, high salinity or high temperature). The results are valuable in developing adequate and efficient control measures for Salm. Enteritidis in foods. © 2016 The Society for Applied Microbiology.

Economic optimization of natural hazard protection - conceptual study of existing approaches

NASA Astrophysics Data System (ADS)

Spackova, Olga; Straub, Daniel

2013-04-01

Risk-based planning of protection measures against natural hazards has become a common practice in many countries. The selection procedure aims at identifying an economically efficient strategy with regard to the estimated costs and risk (i.e. expected damage). A correct setting of the evaluation methodology and decision criteria should ensure an optimal selection of the portfolio of risk protection measures under a limited state budget. To demonstrate the efficiency of investments, indicators such as Benefit-Cost Ratio (BCR), Marginal Costs (MC) or Net Present Value (NPV) are commonly used. However, the methodologies for efficiency evaluation differ amongst different countries and different hazard types (floods, earthquakes etc.). Additionally, several inconsistencies can be found in the applications of the indicators in practice. This is likely to lead to a suboptimal selection of the protection strategies. This study provides a general formulation for optimization of the natural hazard protection measures from a socio-economic perspective. It assumes that all costs and risks can be expressed in monetary values. The study regards the problem as a discrete hierarchical optimization, where the state level sets the criteria and constraints, while the actual optimization is made on the regional level (towns, catchments) when designing particular protection measures and selecting the optimal protection level. The study shows that in case of an unlimited budget, the task is quite trivial, as it is sufficient to optimize the protection measures in individual regions independently (by minimizing the sum of risk and cost). However, if the budget is limited, the need for an optimal allocation of resources amongst the regions arises. To ensure this, minimum values of BCR or MC can be required by the state, which must be achieved in each region. The study investigates the meaning of these indicators in the optimization task at the conceptual level and compares their

Direct and protective effects of single or combined addition of vincristine and ε-viniferin on human HepG2 cellular oxidative stress markers in vitro.

PubMed

Tarhan, Seda; Özdemir, Filiz; İncesu, Zerrin; Demirkan, Emine Sütken

2016-08-01

The objective of this study is to examine the direct effects of low doses and high doses of ε-viniferin, a substance known to be an antioxidant, and vincristine sulphate, a chemotherapeutic agent, alone and in combination [ε-viniferin + vincristine] on HepG2 cell strain, as well as evaluate oxidative stress after incubation periods of 3, 6, and 24 h. Direct effect was determined right after the incubation period; however, for protective effect, antioxidant protection response was determined after the treatment for 1 h with 500 μM H2O2, which is an oxidative stressor. For this purpose, superoxide dismutase was determined for enzyme activity, and lipid hydroperoxide (LPO) and reduced glutathione concentrations were studied as indicators of oxidative stress. Results show that low [3.63 µM vincristine + 3.75 µM ε-viniferin] and high [11.25 µM vincristine + 15.8 µM ε-viniferin] doses of combination groups showed similar direct antioxidant effect on LPO levels as protective when compared to the H2O2 control group (p < 0.05). Superoxide dismutase enzyme showed a direct antioxidant effect in low and high dose combination groups. In addition, when the incubation period was increased to 24 h, a protective effect was observed in both dose groups (p < 0.05). Reduced glutathione activities showed a direct effect in the low dose combination group, and a protective effect in both the low and high doses in the 24 h. These results show that combined usage of drugs in HepG2 cell strain possesses a protective effect against exogenically produced oxidative stress conditions.

Neutron Measurements for Radiation Protection in Low Earth Orbit - History and Future

NASA Technical Reports Server (NTRS)

Golightly, M. J.; Se,pmes. E/

2003-01-01

The neutron environment inside spacecraft has been of interest from a scientific and radiation protection perspective since early in the history of manned spaceflight. With 1:.1e exception of a few missions which carried plutonium-fueled radioisotope thermoelectric generators, all of the neutrons inside the spacecraft are secondary radiations resulting from interactions of high-energy charged particles with nuclei in the Earth's atmosphere, spacecraft structural materials, and the astronaut's own bodies. Although of great interest, definitive measurements of the spacecraft neutron field have been difficult due to the wide particle energy range and the limited available volume and power for traditional techniques involving Bonner spheres. A multitude of measurements, however, have been made of the neutron environment inside spacecraft. The majority of measurements were made using passive techniques including metal activation fo ils, fission foils, nuclear photoemulsions, plastic track detectors, and thermoluminescent detectors. Active measurements have utilized proton recoil spectrometers (stilbene), Bonner Spheres eRe proportional counter based), and LiI(Eu)phoswich scintillation detectors. For the International Space Station (ISS), only the plastic track! thermoluminescent detectors are used with any regularity. A monitoring program utilizing a set of active Bonner spheres was carried out in the ISS Lab module from March - December 200l. These measurements provide a very limited look at the crew neutron exposure, both in time coverage and neutron energy coverage. A review of the currently published data from past flights will be made and compared with the more recent results from the ISS. Future measurement efforts using currently available techniques and those in development will be also discussed.

Tuberculosis Infection Control in Health-Care Facilities: Environmental Control and Personal Protection.

PubMed

Lee, Ji Yeon

2016-10-01

Transmission of tuberculosis (TB) is a recognized risk to patients and healthcare workers in healthcare settings. The literature review suggests that implementation of combination control measures reduces the risk of TB transmission. Guidelines suggest a three-level hierarchy of controls including administrative, environmental, and respiratory protection. Among environmental controls, installation of ventilation systems is a priority because ventilation reduces the number of infectious particles in the air. Natural ventilation is cost-effective but depends on climatic conditions. Supplemented intervention such as air-cleaning methods including high efficiency particulate air filtration and ultraviolet germicidal irradiation should be considered in areas where adequate ventilation is difficult to achieve. Personal protective equipment including particulate respirators provides additional benefit when administrative and environmental controls cannot assure protection.

Verification and Validation of Monte Carlo n-Particle Code 6 (MCNP6) with Neutron Protection Factor Measurements of an Iron Box

DTIC Science & Technology

2014-03-27

VERIFICATION AND VALIDATION OF MONTE CARLO N- PARTICLE CODE 6 (MCNP6) WITH NEUTRON PROTECTION FACTOR... PARTICLE CODE 6 (MCNP6) WITH NEUTRON PROTECTION FACTOR MEASUREMENTS OF AN IRON BOX THESIS Presented to the Faculty Department of Engineering...STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED iv AFIT-ENP-14-M-05 VERIFICATION AND VALIDATION OF MONTE CARLO N- PARTICLE CODE 6

Ischemic preconditioning fails to confer additional protection against ischemia-reperfusion injury in the hypothyroid rat heart.

PubMed

Mourouzis, I; Dimopoulos, A; Saranteas, T; Tsinarakis, N; Livadarou, E; Spanou, D; Kokkinos, A D; Xinaris, C; Pantos, C; Cokkinos, D V

2009-01-01

There is accumulating evidence showing that ischemic preconditioning (PC) may lose its cardioprotective effect in the diseased states. The present study investigated whether PC can be effective in hypothyroidism, a clinical condition which is common and often accompanies cardiac diseases such as heart failure and myocardial infarction. Hypothyroidism was induced in rats by 3-week administration of 6n-propyl-2-thiouracil in water (0.05 %). Normal and hypothyroid hearts (HYPO) were perfused in Langendorff mode and subjected to 20 min of zero-flow global ischemia and 45 min of reperfusion. A preconditioning protocol (PC) was also applied prior to ischemia. HYPO hearts had significantly improved post-ischemic recovery of left ventricular developed pressure, end-diastolic pressure and reduced lactate dehydrogenase release. Furthermore, phospho-JNK and p38 MAPK levels after ischemia and reperfusion were 4.0 and 3.0 fold lower in HYPO as compared to normal hearts (P<0.05). A different response to PC was observed in normal than in HYPO hearts. PC improved the post-ischemic recovery of function and reduced the extent of injury in normal hearts but had no additional effect on the hypothyroid hearts. This response, in the preconditioned normal hearts, resulted in 2.5 and 1.8 fold smaller expression of the phospho-JNK and phospho-p38 MAPK levels at the end of reperfusion, as compared to non-PC hearts (P<0.05), while in HYPO hearts, no additional reduction in the phosphorylation of these kinases was observed after PC. Hypothyroid hearts appear to be tolerant to ischemia-reperfusion injury. This response may be, at least in part, due to the down-regulation of ischemia-reperfusion induced activation of JNKs and p38 MAPK kinases. PC is not associated with further reduction in the activation of these kinases in the hypothyroid hearts and fails to confer added protection in those hearts.

40 CFR 80.521 - What are the standards and identification requirements for diesel fuel additives?

Code of Federal Regulations, 2014 CFR

2014-07-01

... identification requirements for diesel fuel additives? 80.521 Section 80.521 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES... requirements for diesel fuel additives? (a) Except as provided in paragraph (b) of this section, any diesel...

40 CFR 80.521 - What are the standards and identification requirements for diesel fuel additives?

Code of Federal Regulations, 2011 CFR

2011-07-01

... identification requirements for diesel fuel additives? 80.521 Section 80.521 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES... requirements for diesel fuel additives? (a) Except as provided in paragraph (b) of this section, any diesel...

40 CFR 80.521 - What are the standards and identification requirements for diesel fuel additives?

Code of Federal Regulations, 2013 CFR

2013-07-01

... identification requirements for diesel fuel additives? 80.521 Section 80.521 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES... requirements for diesel fuel additives? (a) Except as provided in paragraph (b) of this section, any diesel...

40 CFR 80.521 - What are the standards and identification requirements for diesel fuel additives?

Code of Federal Regulations, 2010 CFR

2010-07-01

... identification requirements for diesel fuel additives? 80.521 Section 80.521 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES... requirements for diesel fuel additives? (a) Except as provided in paragraph (b) of this section, any diesel...

40 CFR 80.521 - What are the standards and identification requirements for diesel fuel additives?

Code of Federal Regulations, 2012 CFR

2012-07-01

... identification requirements for diesel fuel additives? 80.521 Section 80.521 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES... requirements for diesel fuel additives? (a) Except as provided in paragraph (b) of this section, any diesel...

In-situ AFM measurement of single fibrin fiber stiffness before and after addition of Factor XIII

NASA Astrophysics Data System (ADS)

Houser, John; O'Brien, E. Timothy; Lord, Susan T.; Superfine, Richard; Falvo, Michael R.

2008-10-01

Fibrin fibers are the main structural component of blood clots. Ligation of fibrin by native Factor XIII (FXIII) serves to fine tune the mechanical properties of the clot. Mechanical alteration is important because a clot must be stiff enough to resist forces from blood flow but compliant enough to prevent embolism (fracture). Cone and Plate measurements of fibrin gels, which represent the vast majority of mechanical measurements on fibrin, show that FXIII increases clot stiffness. More recently, measurements on individual fibrin fibers show that they exhibit remarkable extensibility, breaking at strains up to 300%. As of yet, the origin of this extensibility is not fully understood. The different responses of ligated and unligated fibrin fibers can give us clues as to it's mechanism of extension. We use a combined fluorescence/atomic force microscope to stretch individual, isolated, fibrin fibers and then compare force extension curves of the same fiber before and after addition of FXIII. We found up to a 3.5-fold increase in fiber stiffness after addition of FXIII. We also show stiffening of individual fibrin fibers after crosslinking by gluteraldehyde.

[Legal development of consumer protection from the Federal Office of Consumer Protection and Food Safety standpoint].

PubMed

Püster, M

2010-06-01

Ten years after publication of the White Paper on Food Safety, health consumer protection has made significant progress and, today, is a key field in politics at both the European and German levels. In addition to the protection of health and security of consumers, consumer information has become a core element of consumer protection for the Federal Office of Consumer Protection and Food Safety (Bundesamt für Verbraucherschutz and Lebensmittelsicherheit, BVL). State authorities are provided with new means of communication and interaction with consumers.

The shady side of solar protection.

PubMed

Parsons, P G; Neale, R; Wolski, P; Green, A

1998-04-06

To determine the value of shade in protecting humans from solar ultraviolet (UV) radiation. Measurement with photometers of protection factors for ultraviolet B radiation (UVB) and for total solar radiation for different types of trees and other structures during the summer months (1995-1997) in south-east Queensland. (The protection ratio is the ratio of the intensity of UVB or total solar radiation in direct sunlight to that in shade.) For summer sun at midday, the mean (SD) UV protection ratio for the shade of trees (n = 65) was 4.21 (1.36) on a horizontal surface and 1.33 (0.30) on a vertical surface. In contrast, the mean (SD) protection ratio for total solar energy (primarily infrared) was much higher (12.1 [1.4]). Trees common in recreational areas in Australia (eucalypts: UV protection ratio, 3.52 [0.79]; Norfolk Island pines: UV protection ratio, 3.72 [0.98]) offered reduced protection compared with trees with more dense foliage (UV protection ratio, 5.48 [1.44]). Over a whole day, measurement of shade by trees and other structures showed that the UV protection ratio was lower in the morning and afternoon. Shade from awnings, buildings and hats gave similar results to those for trees. Both at midday and over a whole day satisfactory protection (UV protection ratio > 15) was obtained only in shade which eliminated exposure to the sky as well as to direct sunlight; for example, in thickly wooded areas and under low, widely overhanging structures. Most forms of shade, while useful, offer people insufficient protection from solar UV. A fair-skinned person sheltering under a tree could suffer sunburn after less than one hour. There is a need for appropriate design of structural shade, use of other solar protection measures in conjunction with shade, and research on behavioural responses to shade.

Fire-Retardant Polymeric Additives

NASA Technical Reports Server (NTRS)

Williams, Martha K.; Smith, Trent M.

2011-01-01

Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

Protecting the protectors of wilderness

Treesearch

Juan Carlos Gambarotta

2007-01-01

Preserving the last remnants of wild country requires effective legislation, adequate finances, and appropriate policies, but in addition it requires the permanent presence of dedicated park rangers. For the International Ranger Federation, a ranger is a person who works in protected areas, and, among other tasks, is responsible for the protection of the natural and...

40 CFR 63.504 - Additional requirements for performance testing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Additional requirements for performance... Additional requirements for performance testing. (a) Performance testing shall be conducted in accordance.... Sections 63.484 through 63.501 also contain specific testing requirements. (1) Performance tests shall be...

49 CFR 192.171 - Compressor stations: Additional safety equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Compressor stations: Additional safety equipment... Pipeline Components § 192.171 Compressor stations: Additional safety equipment. (a) Each compressor station must have adequate fire protection facilities. If fire pumps are a part of these facilities, their...

An International Marine-Atmospheric 222Rn Measurement Intercomparison in Bermuda Part I: NIST Calibration and Methodology for Standardized Sample Additions

PubMed Central

Collé, R.; Unterweger, M. P.; Hodge, P. A.; Hutchinson, J. M. R.

1996-01-01

As part of an international 222Rn measurement intercomparison conducted at Bermuda in October 1991, NIST provided standardized sample additions of known, but undisclosed (“blind”) 222Rn concentrations that could be related to U.S. national standards. The standardized sample additions were obtained with a calibrated 226Ra source and a specially-designed manifold used to obtain well-known dilution factors from simultaneous flow-rate measurements. The additions were introduced over sampling periods of several hours (typically 4 h) into a common streamline on a sampling tower used by the participating laboratories for their measurements. The standardized 222Rn activity concentrations for the intercomparison ranged from approximately 2.5 Bq · m−3 to 35 Bq · m−3 (of which the lower end of this range approached concentration levels for ambient Bermudian air) and had overall uncertainties, approximating a 3 standard deviation uncertainty interval, of about 6 % to 13 %. This paper describes the calibration and methodology for the standardized sample additions. PMID:27805090

Investigation of Model Sunscreen Formulations Comparing the Sun Protection Factor, the Universal Sun Protection Factor and the Radical Formation Ratio.

PubMed

Syring, Felicia; Weigmann, Hans-Jürgen; Schanzer, Sabine; Meinke, Martina C; Knorr, Fanny; Lademann, Jürgen

2016-01-01

In view of globally rising skin cancer rates and harmful effects exerted by sunlight throughout the ultraviolet, visible and infrared ranges, an objective, safe and comprehensive method for determining sunscreen efficacy is required in order to warrant safe sun exposure. In this study, the influence of characteristic active ingredients (chemical filters, physical filters and antioxidants) on different sunscreen indicators, including the universal sun protection factor and the radical formation ratio, was determined and compared to their influence on sun protection factor values. Spectroscopic universal sun protection factor measurements were conducted ex vivo by analyzing tape strips taken from human skin, and radical formation ratio determination was performed via electron paramagnetic resonance spectroscopy using porcine ear skin ex vivo. The sun protection factor determination was conducted according to ISO standards (ISO 24444:2010). It was shown that chemical filters provide a protective effect which was measurable by all methods examined (spectroscopy, electron paramagnetic resonance spectroscopy and erythema formation). Physical filters, when used as single active ingredients, increased protective values in universal sun protection factor and sun protection factor measurements but exhibited no significant effect on universal sun protection factor measurements when used in combination with chemical filters or antioxidants. Antioxidants were shown to increase sun protection factor values. Radical formation ratio values were shown to be influenced merely by chemical filters, leading to the conclusion that the universal sun protection factor is the most suitable efficacy indicator for the ultraviolet range. © 2015 S. Karger AG, Basel.

Local density measurement of additive manufactured copper parts by instrumented indentation

NASA Astrophysics Data System (ADS)

Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise; Tedde, Giovanni Matteo; Zarcone, Mariano; Di Domenico, Gildo; D'Angelo, Pierpaolo; Corona, Diego

2018-05-01

Instrumented flat indentation has been used to evaluate local density of additive manufactured (AM) copper samples with different relative density. Indentations were made by using tungsten carbide (WC) flat pins with 1 mm diameter. Pure copper powders were used in a selective laser melting (SLM) machine to produce samples to test. By changing process parameters, samples density was changed from the relative density of 63% to 71%. Indentation tests were performed on the xy surface of the AM samples. In order to make a correlation between indentation test results and sample density, the indentation pressure at fixed displacement was selected. Results show that instrumented indentation is a valid technique to measure density distribution along the geometry of an SLM part. In fact, a linear trend between indentation pressure and sample density was found for the selected density range.

Protection against an infectious disease by enterohaemorrhagic E. coli 0-157.

PubMed

Ota, A

1999-07-01

Preventive measures against infection by enterohaemorrhagic E. coli 0-157 are described. Eating yoghurt and Kefir supposedly induces more bifid bacteria and lactic acid bacteria to colonize in the intestines, thereby protecting humans from infection by E. coli 0-157. Some foods, such as plum extract, act as a mild antibiotic and produce an acidic environment within the intestine, thus interfering with growth of the E. coli 0-157. The natural colonization of harmless E. coli or other bacteria that are more powerful than E. coli 0-157 can possibly protect against infection. A vaccination against E. coli 0-157 H7 may also be effective. In addition, it has been suggested that the correct levels of nitric oxide and calcium in the blood may activate immunity and protect against infection by E. coli 0-157.

Fluence-based and microdosimetric event-based methods for radiation protection in space

NASA Technical Reports Server (NTRS)

Curtis, Stanley B.; Meinhold, C. B. (Principal Investigator)

2002-01-01

The National Council on Radiation Protection and Measurements (NCRP) has recently published a report (Report #137) that discusses various aspects of the concepts used in radiation protection and the difficulties in measuring the radiation environment in spacecraft for the estimation of radiation risk to space travelers. Two novel dosimetric methodologies, fluence-based and microdosimetric event-based methods, are discussed and evaluated, along with the more conventional quality factor/LET method. It was concluded that for the present, any reason to switch to a new methodology is not compelling. It is suggested that because of certain drawbacks in the presently-used conventional method, these alternative methodologies should be kept in mind. As new data become available and dosimetric techniques become more refined, the question should be revisited and that in the future, significant improvement might be realized. In addition, such concepts as equivalent dose and organ dose equivalent are discussed and various problems regarding the measurement/estimation of these quantities are presented.

Measurements of Immune Responses for Establishing Correlates of Vaccine Protection Against HIV

PubMed Central

Burgers, Wendy A.; Manrique, Amapola; McKinnon, Lyle R.; Reynolds, Matthew R.; Rolland, Morgane; Blish, Catherine; Chege, Gerald K.; Curran, Rhonda; Fischer, William; Herrera, Carolina; Sather, D. Noah

2012-01-01

Abstract Well-defined correlates of protective immunity are an essential component of rational vaccine development. Despite years of basic science and three HIV vaccine efficacy trials, correlates of immunological protection from HIV infection remain undefined. In December 2010, a meeting of scientists engaged in basic and translational work toward developing HIV-1 vaccines was convened. The goal of this meeting was to discuss current opportunities and optimal approaches for defining correlates of protection, both for ongoing and future HIV-1 vaccine candidates; specific efforts were made to engage young scientists. We discuss here the highlights from the meeting regarding the progress made and the way forward for a protective HIV-1 vaccine. PMID:21861777

Clinical validation of the nursing diagnosis of ineffective protection in haemodialysis patients.

PubMed

de Sá Tinôco, Jéssica Dantas; de Paiva, Maria das Graças Mariano Nunes; de Queiroz Frazão, Cecília Maria Farias; Lucio, Kadyjina Daiane Batista; Fernandes, Maria Isabel da Conceição Dias; de Oliveira Lopes, Marcos Venicios; de Carvalho Lira, Ana Luisa Brandão

2018-01-01

To evaluate the clinical validity of indicators of the nursing diagnosis of "ineffective protection" in haemodialysis patients. Haemodialysis patients have reduced protection. Studies on the nursing diagnosis of "ineffective protection" are scarce in the literature. The use of indicators to diagnose "ineffective protection" could improve the care of haemodialysis patients. The clinical usefulness of the indicators requires clinical validation. This was a diagnostic accuracy study. This study assessed a sample of 200 patients undergoing haemodialysis in a reference clinic for nephrology during the first half of 2015. Operational definitions were created for each clinical indicator based on concept analysis and content validation by experts for these indicators. Diagnostic accuracy measurement was performed with latent class analysis with randomised effects. The clinical indicator of "fatigue" had high sensitivity (p = .999) and specificity (p = 1.000) for the identification of "ineffective protection." Additionally, "maladaptive response to stress" (p = .711) and "coagulation change" (p = .653) were sensitive indicators. The main indicators that showed high specificity were "fever" (p = .987), "increased number of hospitalisations" (p = .911), "weakness" (p = .937), "infected vascular access" (p = .962) and "vascular access dysfunction" (p = .722). A set of nine clinical indicators of "ineffective protection" were accurate and statistically significant for haemodialysis patients. Three clinical indicators showed sensitivity, and six indicators showed specificity. Accurate measures for nursing diagnoses can help nurses confirm or rule out the probability of the occurrence of "ineffective protection" in patients undergoing haemodialysis. © 2017 John Wiley & Sons Ltd.

Levee Scour Protection for Storm Waves

NASA Astrophysics Data System (ADS)

Johnson, E.; Sustainable; Resiliency in Levee Scour Protection

2011-12-01

Earnest Johnson, Firat Y. Testik *, Nadarajah Ravichandran Civil Engineering, Clemson University, Clemson, SC, USA * Contact author ftestik@clemson.edu Levee failure due to scouring has been a prominent occurrence among intense storm surges and waves, giving rise to the implementation of various scour protection measures over the years. This study is to investigate the levee scour and to compare different scour protection measures on a model-levee system in a laboratory wave tank. The protection measures that are tested and compared for their effectiveness in this study include turf reinforcement mats, woven geotextiles, and core-locs. This is an ongoing research effort and experiments are currently being conducted with model levees constructed based upon the United States Army Corps of Engineers' levee design and construction guidelines under various simulated storm conditions. Parameters such as wave elevations, deformation time history of the floodwall, and the scour depth are measured in each test. The finding of this research will be translated to provide effective scour protection measures for robust levee designs.

Physicians involved in the care of patients with high risk of skin cancer should be trained regarding sun protection measures: evidence from a cross sectional study.

PubMed

Thomas, M; Rioual, E; Adamski, H; Roguedas, A-M; Misery, L; Michel, M; Chastel, F; Schmutz, J-L; Aubin, F; Marguery, M-C; Meyer, N

2011-01-01

Knowledge, regarding sun protection, is essential to change behaviour and to reduce sun exposure of patients at risk for skin cancer. Patient education regarding appropriate or sun protection measures, is a priority to reduce skin cancer incidence. The aim of this study was to evaluate the knowledge about sun protection and the recommendations given in a population of non-dermatologists physicians involved in the care of patients at high risk of skin cancer. This study is a cross-sectional study. Physicians were e-mailed an anonymous questionnaire evaluating the knowledge about risk factors for skin cancer, sun protection and about the role of the physician in providing sun protection recommendations. Of the responders, 71.4% considered that the risk of skin cancer of their patients was increased when compared with the general population. All the responders knew that UV-radiations can contribute to induce skin cancers and 71.4% of them declared having adequate knowledge about sun protection measures. A proportion of 64.2% of them declared that they were able to give sun protection advices: using sunscreens (97.8%), wearing covering clothes (95.5%), performing regular medical skin examination (91.1%), to avoid direct sunlight exposure (77.8%), avoiding outdoor activities in the hottest midday hours (73.3%) and practising progressive exposure (44.4%). Non-dermatologist physicians reported a correct knowledge of UV-induced skin cancer risk factors. The majority of responders displayed adequate knowledge of sun protection measures and declared providing patients with sun protection recommendation on a regular basis. Several errors persisted. © 2010 The Authors. Journal of the European Academy of Dermatology and Venereology © 2010 European Academy of Dermatology and Venereology.

[Radiation protection in interventional radiology].

PubMed

Adamus, R; Loose, R; Wucherer, M; Uder, M; Galster, M

2016-03-01

The application of ionizing radiation in medicine seems to be a safe procedure for patients as well as for occupational exposition to personnel. The developments in interventional radiology with fluoroscopy and dose-intensive interventions require intensified radiation protection. It is recommended that all available tools should be used for this purpose. Besides the options for instruments, x‑ray protection at the intervention table must be intensively practiced with lead aprons and mounted lead glass. A special focus on eye protection to prevent cataracts is also recommended. The development of cataracts might no longer be deterministic, as confirmed by new data; therefore, the International Commission on Radiological Protection (ICRP) has lowered the threshold dose value for eyes from 150 mSv/year to 20 mSv/year. Measurements show that the new values can be achieved by applying all X‑ray protection measures plus lead-containing eyeglasses.

75 FR 81921 - Fisheries of the Exclusive Economic Zone Off Alaska; Steller Sea Lion Protection Measures for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-29

.... 101006495-0498-01] RIN 0648-BA31 Fisheries of the Exclusive Economic Zone Off Alaska; Steller Sea Lion Protection Measures for the Bering Sea and Aleutian Islands Groundfish Fisheries Off Alaska; Correction... interim final rule pertaining to Fisheries of the Exclusive Economic Zone Off Alaska; Steller Sea Lion...

A new life for a 10-year old MueTec2010 CD measurement system: the ultimate precision upgrade with additional film thickness measurement capability

NASA Astrophysics Data System (ADS)

Cassol, Gian Luca; Bianucci, Giovanni; Murai, Shiaki; Falk, Günther; Scheuring, Gerd; Döbereiner, Stefan; Brück, Hans-Jürgen

2006-06-01

A 10-year old MueTec2010, white light CD measurement system, installed at DNP Photomask Europe and previously owned by STMicroelectronics, has been upgraded to fulfill the high-end optical CD measurement requirements, and to add the film thickness measurement capability. That is the ultimate upgrade, consisting of two new computers with WINDOWS 2000 operating system, a new 150X measurement objective, a new 16-bit CCD digital camera, a new tube lens for the old Leica Ergoplan microscope, and the NanoStar software with the pattern recognition option. The upgrade yielded an average 45% repeatability improvement for isolated and dense lines and spaces, with 1.2nm average repeatability in a 0.3-10μm CD nominal range. Contact holes report an average 50% repeatability improvement, with 2.5nm average repeatability. The improved precision allows a +/-2-nm CD calibration and correlation down to 0.4μm CD nominal. Overall, the upgraded MueTec2010 shows same or better performance than the already installed Leica LWM250UV CD measurement system, despite the longer illumination wavelength of the former. The improved short and long term repeatability reduced the Gauge RandR figure from 24% to 11% at +/-20nm tolerance, which qualifies the system for high-end binary mask down to 0.5μm CD nominal. The feasibility to calibrate the system for 248nm Molybdenum Silicide Phase Shifting Masks is currently being investigated. In addition to that, the new measurement algorithms, the capability to take multiple measurements within the FOV, and the pattern recognition capability included in the NanoStar software gave a 75% throughput boost to the fully automated macros for the weekly calibration tests of the laser writing tools, compared to the LWM250UV run time. With little additional hardware and software, the system has also been upgraded to include the film thickness measurement capability for the PSM resist coating process (2nd exposure), without the need for a dedicated, more expensive

Are current guidelines for sun protection optimal for health? Exploring the evidence.

PubMed

Lucas, Robyn M; Neale, Rachel E; Madronich, Sasha; McKenzie, Richard L

2018-06-15

Exposure of the skin to ultraviolet (UV) radiation is the main risk factor for skin cancer, and a major source of vitamin D, in many regions of the world. Sun protection messages to minimize skin cancer risks but avoid vitamin D deficiency are challenging, partly because levels of UV radiation vary by location, season, time of day, and atmospheric conditions. The UV Index provides information on levels of UV radiation and is a cornerstone of sun protection guidelines. Current guidelines from the World Health Organization are that sun protection is required only when the UV Index is 3 or greater. This advice is pragmatic rather than evidence based. The UV Index is a continuous scale; more comprehensive sun protection is required as the UV Index increases. In addition, a wide range of UVA doses is possible with a UVI of 3, from which there may be health consequences, while full sun protection when the UVI is "moderate" (between 3 and 5) may limit vitamin D production. Finally, the duration of time spent in the sun is an essential component of a public health message, in addition to the intensity of ambient UV radiation as measured by the UV Index. Together these provide the dose of UV radiation that is relevant to both skin cancer genesis and vitamin D production. Further education is required to increase the understanding of the UV Index; messages framed using the UV Index need to incorporate the importance of duration of exposure and increasing sun protection with increasing dose of UV radiation.

Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing

NASA Astrophysics Data System (ADS)

McKeown, Joseph T.; Zweiacker, Kai; Liu, Can; Coughlin, Daniel R.; Clarke, Amy J.; Baldwin, J. Kevin; Gibbs, John W.; Roehling, John D.; Imhoff, Seth D.; Gibbs, Paul J.; Tourret, Damien; Wiezorek, Jörg M. K.; Campbell, Geoffrey H.

2016-03-01

Additive manufacturing (AM) of metals and alloys is becoming a pervasive technology in both research and industrial environments, though significant challenges remain before widespread implementation of AM can be realized. In situ investigations of rapid alloy solidification with high spatial and temporal resolutions can provide unique experimental insight into microstructure evolution and kinetics that are relevant for AM processing. Hypoeutectic thin-film Al-Cu and Al-Si alloys were investigated using dynamic transmission electron microscopy to monitor pulsed-laser-induced rapid solidification across microsecond timescales. Solid-liquid interface velocities measured from time-resolved images revealed accelerating solidification fronts in both alloys. The observed microstructure evolution, solidification product, and presence of a morphological instability at the solid-liquid interface in the Al-4 at.%Cu alloy are related to the measured interface velocities and small differences in composition that affect the thermophysical properties of the alloys. These time-resolved in situ measurements can inform and validate predictive modeling efforts for AM.

Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing

DOE PAGES

McKeown, Joseph T.; Zweiacker, Kai; Liu, Can; ...

2016-01-27

In research and industrial environments, additive manufacturing (AM) of metals and alloys is becoming a pervasive technology, though significant challenges remain before widespread implementation of AM can be realized. In situ investigations of rapid alloy solidification with high spatial and temporal resolutions can provide unique experimental insight into microstructure evolution and kinetics that are relevant for AM processing. Hypoeutectic thin-film Al–Cu and Al–Si alloys were investigated using dynamic transmission electron microscopy to monitor pulsed-laser-induced rapid solidification across microsecond timescales. Solid–liquid interface velocities measured from time-resolved images revealed accelerating solidification fronts in both alloys. We observed microstructure evolution, solidification product, andmore » presence of a morphological instability at the solid–liquid interface in the Al–4 at.%Cu alloy are related to the measured interface velocities and small differences in composition that affect the thermophysical properties of the alloys. These time-resolved in situ measurements can inform and validate predictive modeling efforts for AM.« less

Fusion of sensor geometry into additive strain fields measured with sensing skin

NASA Astrophysics Data System (ADS)

Downey, Austin; Sadoughi, Mohammadkazem; Laflamme, Simon; Hu, Chao

2018-07-01

Recently, numerous studies have been conducted on flexible skin-like membranes for the cost effective monitoring of large-scale structures. The authors have proposed a large-area electronic consisting of a soft elastomeric capacitor (SEC) that transduces a structure’s strain into a measurable change in capacitance. Arranged in a network configuration, SECs deployed onto the surface of a structure could be used to reconstruct strain maps. Several regression methods have been recently developed with the purpose of reconstructing such maps, but all these algorithms assumed that each SEC-measured strain located at its geometric center. This assumption may not be realistic since an SEC measures the average strain value of the whole area covered by the sensor. One solution is to reduce the size of each SEC, but this would also increase the number of required sensors needed to cover the large-scale structure, therefore increasing the need for the power and data acquisition capabilities. Instead, this study proposes an algorithm that accounts for the sensor’s strain averaging feature by adjusting the strain measurements and constructing a full-field strain map using the kriging interpolation method. The proposed algorithm fuses the geometry of an SEC sensor into the strain map reconstruction in order to adaptively adjust the average kriging-estimated strain of the area monitored by the sensor to the signal. Results show that by considering the sensor geometry, in addition to the sensor signal and location, the proposed strain map adjustment algorithm is capable of producing more accurate full-field strain maps than the traditional spatial interpolation method that considered only signal and location.

Two Decades of Enhancing Children’s Environmental Health Protection at the U.S. Environmental Protection Agency

PubMed Central

Firestone, Michael; Berger, Martha; Foos, Brenda; Etzel, Ruth

2016-01-01

Summary: This article provides an overview of public health efforts by the U.S. Environmental Protection Agency (EPA) during the past two decades to protect children’s health from environmental hazards. It highlights examples of concrete steps and accomplishments toward improving environmental protection and health outcomes achieved through public policy, rules and regulations, increased scientific understanding, and public health messaging. Additionally, examples of future challenges for better understanding and improving children’s environmental health are discussed. PMID:27905272

A nuclear method to measure spallation by thermal cycling of protective surface layers

NASA Astrophysics Data System (ADS)

Stroosnijder, M. F.; Macchi, G.

1995-05-01

After a general introduction on spallation by thermal cycling, the principle of Thin Layer Activation (TLA) is outlined. A practical setup to measure spallation of protective surface layers by thermal cycling using TLA is discussed. Its use is illustrated with the study of the spallation behaviour of an advanced thermal barrier coating. It is shown that among the various benefits, TLA has a direct relation to material loss and shows a significant increase in sensitivity over other test methods. Due to its intrinsic properties, TLA can contribute to a greater scientific understanding of material degradation by thermal cycling and it can provide a more reliable assessment of the service lives of technical components.

Workshop 5 (synthesis): water pollution abatement as related to ecosystem protection.

PubMed

Hagebro, C

2004-01-01

Water pollution exerts major stress on water systems and the challenge is to ensure security in river basins for both water-dependent activities and for the aquatic ecosystems. The workshop focused on protection of good ecological status, quality criteria, priorities for action, and on achievement of sustainable improvements. The three keynote speakers presented the concept applied in the EU Water Framework Directive, the need for a multi-stakeholder collaboration in order to reach a good ecological status of waters and a concrete example of interactive planning of water protection measures in a transboundary lake. The additional paper presentations addressed specific pollution problems in catchments, the effect of environmental user fees and ecosystem indicators.

Traceability of radiation protection instruments

NASA Astrophysics Data System (ADS)

Hino, Y.; Kurosawa, T.

2007-08-01

Radiation protection instruments are used in daily measurement of dose and activities in workplaces and environments for safety management. The requirements for calibration certificates with traceability are increasing for these instruments to ensure the consistency and reliabilities of the measurement results. The present traceability scheme of radiation protection instruments for dose and activity measurements is described with related IEC/ISO requirements. Some examples of desirable future calibration systems with recent new technologies are also discussed to establish the traceability with reasonable costs and reliabilities.

Molybdate Coatings for Protecting Aluminum Against Corrosion

NASA Technical Reports Server (NTRS)

Calle, Luz Marina; MacDowell, Louis G.

2005-01-01

Conversion coatings that comprise mixtures of molybdates and several additives have been subjected to a variety of tests to evaluate their effectiveness in protecting aluminum and alloys of aluminum against corrosion. Molybdate conversion coatings are under consideration as replacements for chromate conversion coatings, which have been used for more than 70 years. The chromate coatings are highly effective in protecting aluminum and its alloys against corrosion but are also toxic and carcinogenic. Hexavalent molybdenum and, hence, molybdates containing hexavalent molybdenum, have received attention recently as replacements for chromates because molybdates mimic chromates in a variety of applications but exhibit significantly lower toxicity. The tests were performed on six proprietary formulations of molybdate conversion coatings, denoted formulations A through F, on panels of aluminum alloy 2024-T3. A bare alloy panel was also included in the tests. The tests included electrochemical impedance spectroscopy (EIS), measurements of corrosion potentials, scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS), and x-ray photoelectron spectroscopy (XPS).

Wide-area measurement system-based supervision of protection schemes with minimum number of phasor measurement units.

PubMed

Gajare, Swaroop; Rao, J Ganeswara; Naidu, O D; Pradhan, Ashok Kumar

2017-08-13

Cascade tripping of power lines triggered by maloperation of zone-3 relays during stressed system conditions, such as load encroachment, power swing and voltage instability, has led to many catastrophic power failures worldwide, including Indian blackouts in 2012. With the introduction of wide-area measurement systems (WAMS) into the grids, real-time monitoring of transmission network condition is possible. A phasor measurement unit (PMU) sends time-synchronized data to a phasor data concentrator, which can provide a control signal to substation devices. The latency associated with the communication system makes WAMS suitable for a slower form of protection. In this work, a method to identify the faulted line using synchronized data from strategic PMU locations is proposed. Subsequently, a supervisory signal is generated for specific relays in the system for any disturbance or stressed condition. For a given system, an approach to decide the strategic locations for PMU placement is developed, which can be used for determining the minimum number of PMUs required for application of the method. The accuracy of the scheme is tested for faults during normal and stressed conditions in a New England 39-bus system simulated using EMTDC/PSCAD software. With such a strategy, maloperation of relays can be averted in many situations and thereby blackouts/large-scale disturbances can be prevented.This article is part of the themed issue 'Energy management: flexibility, risk and optimization'. © 2017 The Author(s).

Electrochemical storage cell containing a substituted anisole or di-anisole redox shuttle additive for overcharge protection and suitable for use in liquid organic and solid polymer electrolytes

DOEpatents

Kerr, John B.; Tian, Minmin

2000-01-01

A electrochemical cell is described comprising an anode, a cathode, a solid polymer electrolyte, and a redox shuttle additive to protect the cell against overcharging and a redox shuttle additive to protect the cell against overcharging selected from the group consisting of: (a) a substituted anisole having the general formula (in an uncharged state): ##STR1## where R.sub.1 is selected from the group consisting of H, OCH.sub.3, OCH.sub.2 CH.sub.3, and OCH.sub.2 phenyl, and R.sub.2 is selected from the group consisting of OCH.sub.3, OCH.sub.2 CH.sub.3, OCH.sub.2 phenyl, and O.sup.- Li.sup.+ ; and (b) a di-anisole compound having the general formula (in an uncharged state): ##STR2## where R is selected from the group consisting of -OCH.sub.3 and -CH.sub.3, m is either 1 or 0, n is either 1 or 0, and X is selected from the group consisting of -OCH.sub.3 (methoxy) or its lithium salt --O.sup.- Li.sup.+. The lithium salt of the di-anisole is the preferred form of the redox shuttle additive because the shuttle anion will then initially have a single negative charge, it loses two electrons when it is oxidized at the cathode, and then moves toward the anode as a single positively charged species where it is then reduced to a single negatively charged species by gaining back two electrons.

Mechanistic Insight in the Function of Phosphite Additives for Protection of LiNi0.5Co0.2Mn0.3O2 Cathode in High Voltage Li-Ion Cells.

PubMed

He, Meinan; Su, Chi-Cheung; Peebles, Cameron; Feng, Zhenxing; Connell, Justin G; Liao, Chen; Wang, Yan; Shkrob, Ilya A; Zhang, Zhengcheng

2016-05-11

Triethlylphosphite (TEP) and tris(2,2,2-trifluoroethyl) phosphite (TTFP) have been evaluated as electrolyte additives for high-voltage Li-ion battery cells using a Ni-rich layered cathode material LiNi0.5Co0.2Mn0.3O2 (NCM523) and the conventional carbonate electrolyte. The repeated charge/discharge cycling for cells containing 1 wt % of these additives was performed using an NCM523/graphite full cell operated at the voltage window from 3.0-4.6 V. During the initial charge process, these additives decompose on the cathode surface at a lower oxidation potential than the baseline electrolyte. Impedance spectroscopy and post-test analyses indicate the formation of protective coatings by both additives on the cathode surface that prevent oxidative breakdown of the electrolyte. However, only TTFP containing cells demonstrate the improved capacity retention and Coulombic efficiency. For TEP, the protective coating is also formed, but low Li(+) ion mobility through the interphase layer results in inferior performance. These observations are rationalized through the inhibition of electrocatalytic centers present on the cathode surface and the formation of organophosphate deposits isolating the cathode surface from the electrolyte. The difference between the two phosphites clearly originates in the different properties of the resulting phosphate coatings, which may be in Li(+) ion conductivity through such materials.

Mechanistic Insight in the Function of Phosphite Additives for Protection of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode in High Voltage Li-Ion Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, Meinan; Su, Chi-Cheung; Peebles, Cameron

Triethlylphosphite (TEP) and tris(2,2,2-trifluoroethyl) phosphite (TTFP) have been evaluated as electrolyte additives for high-voltage Li-ion battery cells using a Ni-rich layered cathode material LiNi0.5Co0.2Mn0.3O2 (NCM523) and the conventional carbonate electrolyte. The repeated charge/discharge cycling for cells containing 1 wt% of these additives was performed using an NCM523/graphite full cell operated at the voltage window from 3.0 to 4.6 V. During the initial charge process, these additives decompose on the cathode surface at a lower oxidation potential than the baseline electrolyte. Impedance spectroscopy and post-test analyses indicate the formation of protective coatings by both additives on the cathode surface that preventmore » oxidative breakdown of the electrolyte. However, only TTFP containing cells demonstrate the improved capacity retention and Coulombic efficiency. For TEP, the protective coating is also formed, but low Li+ ion mobility through the interphase layer results in inferior performance. These observations are rationalized through the inhibition of electrocatalytic centers present on the cathode surface and the formation of organophosphate deposits isolating the cathode surface from the electrolyte. The difference between the two phosphites clearly originates in the different properties of the resulting phosphate coatings, which may be in Li+ ion conductivity through such materials.« less

[Experimental and theoretical studies on radiation protective effect of a lighter non-lead protective apron].

PubMed

Takano, Yoshihisa; Okazaki, Keiichiro; Ono, Koji; Kai, Michiaki

2005-07-20

Non-lead aprons using composite materials are often used for radiation protective aprons instead of heavy lead aprons. However, the protective effect of the lighter, non-lead aprons has not been well evaluated, and it is not yet clear how they compare with lead aprons. Therefore, we investigated the protective performance of non-lead aprons theoretically and experimentally by comparing them with lead aprons under clinical conditions. We measured the energy spectra for direct and scattered X-rays passing through protective aprons or not, and measured doses with glass dosimeters for validation of theoretical calculations based on the energy spectra. We found that the protective effect of non-lead aprons was higher than that of lead aprons at X-ray of tube voltages of 70-100 kV, which are often used for radiography and fluorography. This demonstrated that the non-lead aprons are more useful in many situations than heavy lead aprons.

SU-E-T-243: Design of a Novel Testing Port for Radiation Protection and Shielding Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanny, S; Parsai, E; Harrell, D

2015-06-15

Purpose: The majority of radiation shielding research utilizes Monte Carlo simulation because of the difficulty in eliminating secondary radiations from measurements. We have designed a test port into a primary barrier of our newest vault to allow for shielding measurements while ensuring adequate protection to the public and staff during normal machine operation. This port allows for measurement of attenuation values of shielding materials, differential dose albedos, and radiation scatter fractions. Methods: The vault design utilized the maze as part of a compound primary barrier. The test port is contained within the maze and is centered along isocenter. The innermore » 30 cm has a 20×20 cm{sup 2} opening, while the remaining length has a 30×30 cm{sup 2} opening. The block that contains the port has a density of 200 pcf to minimize internal scatter. The 30×30 cm{sup 2} opening is occupied by removable 215 pcf concrete blocks. The innermost and outermost blocks activate an interlock wired into the beam-enable loop. This disallows beam-on in treatment mode if the interlock isn’t closed. The interlock can be overridden in service mode, or by-passed via an override switch in case of circuit failure. Results: The test port was installed in August. The beam is disabled when the interlock is tripped. Measurements taken when the primary beam is not incident on the port are indistinguishable from background. Ambient dose levels surrounding the vault with the designed shielding blocks in place are all within allowable limits for occupational workers. Conclusions: We have designed and installed a unique testing port for radiation protection and shielding measurements. This port is appropriately interlocked and designed to mitigate any risks of incidental exposure to staff or members of the public. The test port design allows measurements with “good geometry” and efficient removal of contaminating sources of radiation present in many shielding measurements. Daniel

The Chemical Basis of Thiol Addition to Nitro-conjugated Linoleic Acid, a Protective Cell-signaling Lipid*♦

PubMed Central

Turell, Lucía; Vitturi, Darío A.; Coitiño, E. Laura; Lebrato, Lourdes; Möller, Matías N.; Sagasti, Camila; Salvatore, Sonia R.; Woodcock, Steven R.; Alvarez, Beatriz; Schopfer, Francisco J.

2017-01-01

Nitroalkene fatty acids are formed in vivo and exert protective and anti-inflammatory effects via reversible Michael addition to thiol-containing proteins in key signaling pathways. Nitro-conjugated linoleic acid (NO2-CLA) is preferentially formed, constitutes the most abundant nitrated fatty acid in humans, and contains two carbons that could potentially react with thiols, modulating signaling actions and levels. In this work, we examined the reactions of NO2-CLA with low molecular weight thiols (glutathione, cysteine, homocysteine, cysteinylglycine, and β-mercaptoethanol) and human serum albumin. Reactions followed reversible biphasic kinetics, consistent with the presence of two electrophilic centers in NO2-CLA located on the β- and δ-carbons with respect to the nitro group. The differential reactivity was confirmed by computational modeling of the electronic structure. The rates (kon and koff) and equilibrium constants for both reactions were determined for different thiols. LC-UV-Visible and LC-MS analyses showed that the fast reaction corresponds to β-adduct formation (the kinetic product), while the slow reaction corresponds to the formation of the δ-adduct (the thermodynamic product). The pH dependence of the rate constants, the correlation between intrinsic reactivity and thiol pKa, and the absence of deuterium solvent kinetic isotope effects suggested stepwise mechanisms with thiolate attack on NO2-CLA as rate-controlling step. Computational modeling supported the mechanism and revealed additional features of the transition states, anionic intermediates, and final neutral products. Importantly, the detection of cysteine-δ-adducts in human urine provided evidence for the biological relevance of this reaction. Finally, human serum albumin was found to bind NO2-CLA both non-covalently and to form covalent adducts at Cys-34, suggesting potential modes for systemic distribution. These results provide new insights into the chemical basis of NO2-CLA

Low-latency teleoperations, planetary protection, and astrobiology

NASA Astrophysics Data System (ADS)

Lupisella, Mark L.

2018-07-01

The remote operation of an asset with time-delays short enough to allow for `real-time' or near real-time control - often referred to as low-latency teleoperations (LLT) - has important potential to address planetary protection concerns and to enhance astrobiology exploration. Not only can LLT assist with the search for extraterrestrial life and help mitigate planetary protection concerns as required by international treaty, but it can also aid in the real-time exploration of hazardous areas, robotically manipulate samples in real-time, and engage in precise measurements and experiments without the presence of crew in the immediate area. Furthermore, LLT can be particularly effective for studying `Special Regions' - areas of astrobiological interest that might be adversely affected by forward contamination from humans or spacecraft contaminants during activities on Mars. LLT can also aid human exploration by addressing concerns about backward contamination that could impact mission details for returning Martian samples and crew back to Earth.This paper provides an overview of LLT operational considerations and findings from recent NASA analyses and workshops related to planetary protection and human missions beyond Earth orbit. The paper focuses primarily on three interrelated areas of Mars operations that are particularly relevant to the planetary protection and the search for life: Mars orbit-to-surface LLT activities; Crew-on-surface and drilling LLT; and Mars surface science laboratory LLT. The paper also discusses several additional mission implementation considerations and closes with information on key knowledge gaps identified as necessary for the advance of LLT for planetary protection and astrobiology purposes on future human missions to Mars.

Generation of the additional fluorescence radiation in the elastomeric shields used in computer tomography (CT).

PubMed

Szajerski, P; Zaborski, M; Bem, H; Baryn, W; Kusiak, E

Two commercially available (EP, Z) and eight new elastomeric composites (M1-M4, G1-G4, of thickness ≈1 mm) containing mixtures of differing proportions of heavy metal additives (Bi, W, Gd and Sb) have been synthesised and examined as protective shields. The intensity of the X-ray fluorescence radiation generated in the typical elastomeric shields for CT, containing Bi and other heavy metal additives influence on the practical shielding properties. A method for assessing the radiation shielding properties of elastomeric composites used in CT examination procedures via X-ray spectrometry has been proposed. To measure the radiation reduction ability of the protective shields, the dose reduction factor (DRF) has been determined. The lead equivalents for the examined composites were within the ranges of 0.046-0.128 and 0.048-0.130 mm for 122.1 and 136.5 keV photons, respectively. The proposed method, unlike to the common approach, includes a dose contribution from the induced X-ray fluorescence radiation of the heavy metal elements in the protective shields. The results clearly indicate that among the examined compositions, the highest values DRF have been achieved with preparations containing Bi+W, Bi+W+Gd and Bi+W+Sb mixtures with gradually decreasing content of heavy metal additives in the following order: Bi, W, Gd and Sb. The respective values of DRF obtained for the investigated composites were 21, 28 and 27 % dose reduction for a 1 mm thick shield and 39 and ~50 % for a 2 mm thick layer (M1-M4).

NASA Occupant Protection Standards Development

NASA Technical Reports Server (NTRS)

Somers, Jeffrey T.; Gernhardt, Michael A.; Lawrence, Charles

2011-01-01

Current National Aeronautics and Space Administration (NASA) occupant protection standards and requirements are based on extrapolations of biodynamic models, which were based on human tests performed under pre-Space Shuttle human flight programs where the occupants were in different suit and seat configurations than is expected for the Multi Purpose Crew Vehicle (MPCV) and Commercial Crew programs. As a result, there is limited statistical validity to the occupant protection standards. Furthermore, the current standards and requirements have not been validated in relevant spaceflight suit, seat configurations or loading conditions. The objectives of this study were to develop new standards and requirements for occupant protection and rigorously validate these new standards with sub-injurious human testing. To accomplish these objectives we began by determining which critical injuries NASA would like to protect for. We then defined the anthropomorphic test device (ATD) and the associated injury metrics of interest. Finally, we conducted a literature review of available data for the Test Device for Human Occupant Restraint New Technology (THOR-NT) ATD to determine injury assessment reference values (IARV) to serve as a baseline for further development. To better understand NASA s environment, we propose conducting sub-injurious human testing in spaceflight seat and suit configurations with spaceflight dynamic loads, with a sufficiently high number of subjects to validate no injury during nominal landing loads. In addition to validate nominal loads, the THOR-NT ATD will be tested in the same conditions as the human volunteers, allowing correlation between human and ATD responses covering the Orion nominal landing environment and commercial vehicle expected nominal environments. All testing will be conducted without the suit and with the suit to ascertain the contribution of the suit to human and ATD responses. In addition to the testing campaign proposed, additional

Corrosion inhibition with different protective layers in tinplate cans for food preservation.

PubMed

Grassino, Antonela Ninčević; Grabarić, Zorana; Pezzani, Aldo; Squitieri, Giuseppe; Berković, Katarina

2010-11-01

In this work the influence of essential onion oil (EOO) on the protection of tinplates was compared with dioctyl sebacate oil (DOS) and epoxy phenolic lacquers, which are frequently used in the food canning industry. When EOO as the protective layer instead of DOS oil was used, tinplate porosity, measured electrochemically (7.58 ± 1.97 µA cm(-2) and 23.0 ± 1.3 µA cm(-2), respectively), and iron coating mass, calculated from AAS data (1.52 ± 0.15 mg m(-2) and 3.14 ± 0.42, respectively), was much lower indicating better corrosion protection. At higher storing temperature (36 °C) the addition of EOO to canned tomato purée enhanced the formation of hydrogen with time. The increasing volume fraction of H(2) (from 34.0 to 90.9% for cans without nitrates, and from 33.8 to 89.2% for cans with nitrates) is an indicator that corrosion takes place. As the use of EOO improves the protection of tinplate compared with DOS oil, and is almost as effective as epoxy phenolic lacquer, the addition of EOO can be recommended due to lower cost of canned food production and enhanced organoleptic properties, but the storage temperature has to be lower then 36 °C. 2010 Society of Chemical Industry

Phosphine-Catalyzed Doubly Stereoconvergent γ-Additions of Racemic Heterocycles to Racemic Allenoates: The Catalytic Enantioselective Synthesis of Protected α,α-Disubstituted α-Amino Acid Derivatives.

PubMed

Kalek, Marcin; Fu, Gregory C

2015-07-29

Methods have recently been developed for the phosphine-catalyzed asymmetric γ-addition of nucleophiles to readily available allenoates and alkynoates to generate useful α,β-unsaturated carbonyl compounds that bear a stereogenic center in either the γ or the δ position (but not both) with high stereoselectivity. The utility of this approach would be enhanced considerably if the stereochemistry at both termini of the new bond could be controlled effectively. In this report, we describe the achievement of this objective, specifically, that a chiral phosphepine can catalyze the stereoconvergent γ-addition of a racemic nucleophile to a racemic electrophile; through the choice of an appropriate heterocycle as the nucleophilic partner, this new method enables the synthesis of protected α,α-disubstituted α-amino acid derivatives in good yield, diastereoselectivity, and enantioselectivity.

29 CFR Appendix B to Subpart I of... - General Testing Conditions and Additional Guidelines for Personal Fall Protection Systems (Non...

Code of Federal Regulations, 2010 CFR

2010-07-01

...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Personal Protective Equipment (PPE) Pt. 1915... Personal Fall Protection Systems (Non-Mandatory) B Appendix B to Subpart I of Part 1915 Labor Regulations... Guidelines for Personal Fall Protection Systems (Non-Mandatory) 1. Personal fall arrest systems—(a) General...

29 CFR Appendix B to Subpart I of... - General Testing Conditions and Additional Guidelines for Personal Fall Protection Systems (Non...

Code of Federal Regulations, 2011 CFR

2011-07-01

...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Personal Protective Equipment (PPE) Pt. 1915... Personal Fall Protection Systems (Non-Mandatory) B Appendix B to Subpart I of Part 1915 Labor Regulations... Guidelines for Personal Fall Protection Systems (Non-Mandatory) 1. Personal fall arrest systems—(a) General...

The prevalence of acute respiratory symptoms and role of protective measures among Malaysian hajj pilgrims.

PubMed

Deris, Zakuan Zainy; Hasan, Habsah; Sulaiman, Siti Amrah; Wahab, Mohd Suhaimi Ab; Naing, Nyi Nyi; Othman, Nor Hayati

2010-01-01

Respiratory symptoms including cough, runny nose, sore throat, and fever are the most common clinical manifestations faced by hajj pilgrims in Mecca. The aim of the study was to determine the prevalence of respiratory symptoms among Malaysian hajj pilgrims and the effect of a few protective measures taken by hajj pilgrims to reduce respiratory symptoms. A cross-sectional study was conducted by distributing survey forms to Malaysian hajj pilgrims at transit center before flying back to Malaysia. The recruitment of respondents to the survey was on a voluntary basis. A total of 387 survey forms were available for analysis. The mean age was 50.4 +/- 11.0 years. The common respiratory symptoms among Malaysian hajj pilgrims were: cough 91.5%, runny nose 79.3%, fever 59.2%, and sore throat 57.1%. The prevalence of hajj pilgrims with triad of cough, subjective fever, and sore throat were 40.1%. The symptoms lasted less than 2 weeks in the majority of cases. Only 3.6% did not suffer from any of these symptoms. Seventy-two percent of hajj pilgrims received influenza vaccination before departure and 72.9% wore facemasks. Influenza vaccination was not associated with any of respiratory symptoms but it was significantly associated with longer duration of sore throat. Wearing masks was significantly associated with sore throat and longer duration of sore throat and fever. The prevalence of respiratory symptoms was high among Malaysian hajj pilgrims and the current protective measures seemed inadequate to reduce it. Beside standardization of the term used in hajj studies, more collaborative effort should be taken to reduce respiratory symptoms. The hajj authority should prepare for the challenge of pandemic influenza by providing more healthcare facilities and implementation of more strict measures to reduce the transmission of pandemic influenza strain among hajj pilgrims.

Utilizing Additional Measures of High School Academic Preparation to Support Students in Their Math Self-Assessment

ERIC Educational Resources Information Center

Fong, Kristen E.; Melguizo, Tatiana

2017-01-01

This study describes student behavior through the actual assessment and placement (A&P) process. It then uses an alternative A&P policy that utilizes an additional measure that assesses prior math preparedness alongside subtest choice. Utilizing data from a community college that allows its' students to choose the assessment subtest used…

Repeated Nrf2 stimulation using sulforaphane protects fibroblasts from ionizing radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mathew, Sherin T.; Bergström, Petra; Hammarsten, Ola, E-mail: ola.hammarsten@clinchem.gu.se

2014-05-01

Most of the cytotoxicity induced by ionizing radiation is mediated by radical-induced DNA double-strand breaks. Cellular protection from free radicals can be stimulated several fold by sulforaphane-mediated activation of the transcription factor Nrf2 that regulates more than 50 genes involved in the detoxification of reactive substances and radicals. Here, we report that repeated sulforaphane treatment increases radioresistance in primary human skin fibroblasts. Cells were either treated with sulforaphane for four hours once or with four-hour treatments repeatedly for three consecutive days prior to radiation exposure. Fibroblasts exposed to repeated-sulforaphane treatment showed a more pronounced dose-dependent induction of Nrf2-regulated mRNA andmore » reduced amount of radiation-induced free radicals compared with cells treated once with sulforaphane. In addition, radiation- induced DNA double-strand breaks measured by gamma-H2AX foci were attenuated following repeated sulforaphane treatment. As a result, cellular protection from ionizing radiation measured by the 5-ethynyl-2′-deoxyuridine (EdU) assay was increased, specifically in cells exposed to repeated sulforaphane treatment. Sulforaphane treatment was unable to protect Nrf2 knockout mouse embryonic fibroblasts, indicating that the sulforaphane-induced radioprotection was Nrf2-dependent. Moreover, radioprotection by repeated sulforaphane treatment was dose-dependent with an optimal effect at 10 uM, whereas both lower and higher concentrations resulted in lower levels of radioprotection. Our data indicate that the Nrf2 system can be trained to provide further protection from radical damage. - Highlights: • Repeated treatment with sulforaphane protects fibroblasts from ionizing radiation • Repeated sulforaphane treatment attenuates radiation induced ROS and DNA damage • Sulforaphane mediated protection is Nrf2 dependent.« less

Community football players' attitudes towards protective equipment—a pre-season measure

PubMed Central

Braham, R; Finch, C; McIntosh, A; McCrory, P

2004-01-01

Background: The Australian football injury prevention project (AFIPP) was a randomised controlled trial examining the effects of protective equipment on injury rates in Australian Football. Objective: To present the results of the AFIPP baseline survey of community football players' attitudes towards protective equipment. Methods: Teams of players were recruited from the largest community football league in Victoria, Australia, during the 2001 playing season; 301 players were enrolled in the study and all were surveyed before the season began about their attitudes towards protective headgear and mouthguards. Results: Almost three quarters of the players (73.6%) reported wearing mouthguards during the previous playing season (year 2000) compared with only 2.1% wearing headgear. The most common reasons for not wearing headgear and mouthguards (in non-users) were: "I don't like wearing it" (headgear: 44.8%; mouthguards: 30.6%), and "It is too uncomfortable" (headgear: 40.7%; mouthguards: 45.8%). Conclusions: The higher mouthguard usage reflects the favourable attitudes towards mouthguards by Australian football players generally. Similarly, the low headgear usage reflects the low acceptance of this form of protection in this sport. Further research should be directed towards establishing the reasons why players seem to believe that headgear plays a role in injury prevention yet few wear it. PMID:15273177

Safety survey report EBR-II safety survey, ANL-west health protection, industrial safety and fire protection survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunbar, K.A.

1972-01-10

A safety survey covering the disciplines of Reactor Safety, Nuclear Criticality Safety, Health Protection and Industrial Safety and Fire Protection was conducted at the ANL-West EBR-II FEF Complex during the period January 10-18, 1972. In addition, the entire ANL-West site was surveyed for Health Protection and Industrial Safety and Fire Protection. The survey was conducted by members of the AEC Chicago Operations Office, a member of RDT-HQ and a member of the RDT-ID site office. Eighteen recommendations resulted from the survey, eleven in the area of Industrial Safety and Fire Protection, five in the area of Reactor Safety and twomore » in the area of Nuclear Criticality Safety.« less

Applying the take-grant protection model

NASA Technical Reports Server (NTRS)

Bishop, Matt

1990-01-01

The Take-Grant Protection Model has in the past been used to model multilevel security hierarchies and simple protection systems. The models are extended to include theft of rights and sharing information, and additional security policies are examined. The analysis suggests that in some cases the basic rules of the Take-Grant Protection Model should be augmented to represent the policy properly; when appropriate, such modifications are made and their efforts with respect to the policy and its Take-Grant representation are discussed.

Global status of and prospects for protection of terrestrial geophysical diversity.

PubMed

Sanderson, Eric W; Segan, Daniel B; Watson, James E M

2015-06-01

Conservation of representative facets of geophysical diversity may help conserve biological diversity as the climate changes. We conducted a global classification of terrestrial geophysical diversity and analyzed how land protection varies across geophysical diversity types. Geophysical diversity was classified in terms of soil type, elevation, and biogeographic realm and then compared to the global distribution of protected areas in 2012. We found that 300 (45%) of 672 broad geophysical diversity types currently meet the Convention on Biological Diversity's Aichi Target 11 of 17% terrestrial areal protection, which suggested that efforts to implement geophysical diversity conservation have a substantive basis on which to build. However, current protected areas were heavily biased toward high elevation and low fertility soils. We assessed 3 scenarios of protected area expansion and found that protection focused on threatened species, if fully implemented, would also protect an additional 29% of geophysical diversity types, ecoregional-focused protection would protect an additional 24%, and a combined scenario would protect an additional 42%. Future efforts need to specifically target low-elevation sites with productive soils for protection and manage for connectivity among geophysical diversity types. These efforts may be hampered by the sheer number of geophysical diversity facets that the world contains, which makes clear target setting and prioritization an important next step. © 2015 Society for Conservation Biology.

7 CFR 1980.472 - Protective advances.

Code of Federal Regulations, 2013 CFR

2013-01-01

... lieu of additional loans, in particular, working capital loans. Protective advances are advances made... importance, but preserving collateral for maximum recovery is of vital importance. Elements which should... advances, sound judgment must be exercised in determining that the additional funds advanced will actually...

7 CFR 1980.472 - Protective advances.

Code of Federal Regulations, 2012 CFR

2012-01-01

... lieu of additional loans, in particular, working capital loans. Protective advances are advances made... importance, but preserving collateral for maximum recovery is of vital importance. Elements which should... advances, sound judgment must be exercised in determining that the additional funds advanced will actually...

*A FASTER METHOD OF MEASURING RECREATIONAL WATER QUALITY FOR BETTER PROTECTION OF SWIMMER'S HEALTH

EPA Science Inventory

We previously reported that a faster method (< 2 hours) of measuring fecal indicator bacteria (FIB), based on Quantitative Polymerase Chain Reaction (QPCR), was predictive of swimming associated gastrointestinal illness. Using data from two additional beaches, we examined the re...

Lubricant additive concentrate containing isomerized jojoba oil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arndt, G.

1987-05-12

This patent describes a crankcase motor oil additive concentrate intended to be added to a conventional crankcase motor oil to improve its ability to lubricate and protect the engine. The additive concentrate comprises the following components: A petroleum base stock of lubricating quality and viscosity. The base stock comprises from about 13.5 to 90 weight percent of the additive concentrate; a detergent-inhibitor package. The package is present at from about 7 to about 40 weight percent of the concentrate; a supplemental antiwear additive selected from the salts of dialkyl dithiophosporic acids. The additive is present at a level of frommore » about 1 to about 10 weight percent of the concentrate; and a supplemental antiwear additive selected from the class of sulfurized olefins. The additive is present at a level of from about 1 to about 10 weight percent of the concentrate.« less

Protecting children from violence and maltreatment: a qualitative comparative analysis assessing the implementation of U.N. CRC Article 19.

PubMed

Svevo-Cianci, Kimberly A; Hart, Stuart N; Rubinson, Claude

2010-01-01

, Canada, Estonia, Germany, Italy, Jordan, Lebanon, Malaysia, Republic of Korea, the Russian Federation, and the United Kingdom. Governments need to establish CP systems with multiple, well-integrated, effective CP measures as elaborated above, working with trained professionals and also raising public awareness to ensure successful protection for all children in every country. Partial measures are not effective. Further, in addition to establishing, implementing, and evaluating the effectiveness of professional interventions, the actual outcomes for children, not studied or reported on here, need to be the priority focus for child protection going forward. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Using the 'protective environment' framework to analyse children's protection needs in Darfur.

PubMed

Ager, Alastair; Boothby, Neil; Bremer, Megan

2009-10-01

A major humanitarian concern during the continuing crisis in Darfur, Sudan, has been the protection of children, although there has been little in the way of comprehensive analysis to guide intervention. Founded on a situational analysis conducted between October 2005 and March 2006, this paper documents the significant threats to children's well-being directly linked to the political conflict. It demonstrates the role of non-conflict factors in exacerbating these dangers and in promoting additional protection violations, and it uses the 'protective environment' framework (UNICEF Sudan, 2006a) to identify systematic features of the current environment that put children at risk. This framework is shown to provide a coherent basis for assessment and planning, prompting broad, multidisciplinary analysis, concentrating on preventive and protective action, and fostering a systemic approach (rather than placing an undue focus on the discrete needs of 'vulnerable groups'). Constraints on its present utility in emergency settings are also noted.

40 CFR 97.76 - Additional requirements to provide heat input data.

Code of Federal Regulations, 2010 CFR

2010-07-01

... heat input data. 97.76 Section 97.76 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Monitoring and Reporting § 97.76 Additional requirements to provide heat input data. The owner or operator of... a flow system shall also monitor and report heat input rate at the unit level using the procedures...

40 CFR 97.76 - Additional requirements to provide heat input data.

Code of Federal Regulations, 2011 CFR

2011-07-01

... heat input data. 97.76 Section 97.76 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Monitoring and Reporting § 97.76 Additional requirements to provide heat input data. The owner or operator of... a flow system shall also monitor and report heat input rate at the unit level using the procedures...

40 CFR 97.76 - Additional requirements to provide heat input data.

Code of Federal Regulations, 2013 CFR

2013-07-01

... heat input data. 97.76 Section 97.76 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Monitoring and Reporting § 97.76 Additional requirements to provide heat input data. The owner or operator of... a flow system shall also monitor and report heat input rate at the unit level using the procedures...

40 CFR 97.76 - Additional requirements to provide heat input data.

Code of Federal Regulations, 2014 CFR

2014-07-01

... heat input data. 97.76 Section 97.76 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Monitoring and Reporting § 97.76 Additional requirements to provide heat input data. The owner or operator of... a flow system shall also monitor and report heat input rate at the unit level using the procedures...

40 CFR 97.76 - Additional requirements to provide heat input data.

Code of Federal Regulations, 2012 CFR

2012-07-01

... heat input data. 97.76 Section 97.76 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Monitoring and Reporting § 97.76 Additional requirements to provide heat input data. The owner or operator of... a flow system shall also monitor and report heat input rate at the unit level using the procedures...

40 CFR 716.105 - Additions of substances and mixtures to which this subpart applies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Additions of substances and mixtures to which this subpart applies. 716.105 Section 716.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT HEALTH AND SAFETY DATA REPORTING Specific Chemical...

40 CFR 716.105 - Additions of substances and mixtures to which this subpart applies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Additions of substances and mixtures to which this subpart applies. 716.105 Section 716.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT HEALTH AND SAFETY DATA REPORTING Specific Chemical...

40 CFR 716.105 - Additions of substances and mixtures to which this subpart applies.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Additions of substances and mixtures to which this subpart applies. 716.105 Section 716.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT HEALTH AND SAFETY DATA REPORTING Specific Chemical...

40 CFR 716.105 - Additions of substances and mixtures to which this subpart applies.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Additions of substances and mixtures to which this subpart applies. 716.105 Section 716.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT HEALTH AND SAFETY DATA REPORTING Specific Chemical...

40 CFR 716.105 - Additions of substances and mixtures to which this subpart applies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Additions of substances and mixtures to which this subpart applies. 716.105 Section 716.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT HEALTH AND SAFETY DATA REPORTING Specific Chemical...

Determining the Impact of Steady-State PV Fault Current Injections on Distribution Protection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seuss, John; Reno, Matthew J.; Broderick, Robert Joseph

This report investigates the fault current contribution from a single large PV system and the impact it has on existing distribution overcurrent protection devices. Assumptions are made about the modeling of the PV system under fault to perform exhaustive steady - state fault analyses throughout distribution feeder models. Each PV interconnection location is tested to determine how the size of the PV system affects the fault current measured by each protection device. This data is then searched for logical conditions that indicate whether a protection device has operated in a manner that will cause more customer outages due to themore » addition of the PV system. This is referred to as a protection issue , and there are four unique types of issues that have been identified in the study. The PV system size at which any issues occur are recorded to determine the feeder's PV hosting capacity limitations due to interference with protection settings. The analysis is carried out on six feeder models. The report concludes with a discussion of the prevalence and cause of each protection issue caused by PV system fault current.« less

Monitoring the level of government trust, risk perception and intention of the general public to adopt protective measures during the influenza A (H1N1) pandemic in The Netherlands.

PubMed

van der Weerd, Willemien; Timmermans, Daniëlle Rm; Beaujean, Desirée Jma; Oudhoff, Jurriaan; van Steenbergen, Jim E

2011-07-19

During the course of an influenza pandemic, governments know relatively little about the possibly changing influence of government trust, risk perception, and receipt of information on the public's intention to adopt protective measures or on the acceptance of vaccination. This study aims to identify and describe possible changes in and factors associated with public's intentions during the 2009 influenza A (H1N1) pandemic in the Netherlands. Sixteen cross-sectional telephone surveys were conducted (N = 8060) between April - November 2009. From these repeated measurements three consecutive periods were categorized based on crucial events during the influenza A (H1N1) pandemic. Time trends in government trust, risk perception, intention to adopt protective measures, and the acceptance of vaccination were analysed. Factors associated with an intention to adopt protective measures or vaccination were identified. Trust in the government was high, but decreased over time. During the course of the pandemic, perceived vulnerability and an intention to adopt protective measures increased. Trust and vulnerability were associated with an intention to adopt protective measures in general only during period one. Higher levels of intention to receive vaccination were associated with increased government trust, fear/worry, and perceived vulnerability. In periods two and three receipt of information was positively associated with an intention to adopt protective measures. Most respondents wanted to receive information about infection prevention from municipal health services, health care providers, and the media. The Dutch response to the H1N1 virus was relatively muted. Higher levels of trust in the government, fear/worry, and perceived vulnerability were all positively related to an intention to accept vaccination. Only fear/worry was positively linked to an intention to adopt protective measures during the entire pandemic. Risk and crisis communication by the government should

Monitoring the level of government trust, risk perception and intention of the general public to adopt protective measures during the influenza A (H1N1) pandemic in the Netherlands

PubMed Central

2011-01-01

Background During the course of an influenza pandemic, governments know relatively little about the possibly changing influence of government trust, risk perception, and receipt of information on the public's intention to adopt protective measures or on the acceptance of vaccination. This study aims to identify and describe possible changes in and factors associated with public's intentions during the 2009 influenza A (H1N1) pandemic in the Netherlands. Methods Sixteen cross-sectional telephone surveys were conducted (N = 8060) between April - November 2009. From these repeated measurements three consecutive periods were categorized based on crucial events during the influenza A (H1N1) pandemic. Time trends in government trust, risk perception, intention to adopt protective measures, and the acceptance of vaccination were analysed. Factors associated with an intention to adopt protective measures or vaccination were identified. Results Trust in the government was high, but decreased over time. During the course of the pandemic, perceived vulnerability and an intention to adopt protective measures increased. Trust and vulnerability were associated with an intention to adopt protective measures in general only during period one. Higher levels of intention to receive vaccination were associated with increased government trust, fear/worry, and perceived vulnerability. In periods two and three receipt of information was positively associated with an intention to adopt protective measures. Most respondents wanted to receive information about infection prevention from municipal health services, health care providers, and the media. Conclusions The Dutch response to the H1N1 virus was relatively muted. Higher levels of trust in the government, fear/worry, and perceived vulnerability were all positively related to an intention to accept vaccination. Only fear/worry was positively linked to an intention to adopt protective measures during the entire pandemic. Risk and crisis

Heat protection behaviour in the UK: results of an online survey after the 2013 heatwave.

PubMed

Khare, Swarna; Hajat, Shakoor; Kovats, Sari; Lefevre, Carmen E; de Bruin, Wändi Bruine; Dessai, Suraje; Bone, Angie

2015-09-10

The Heatwave Plan for England provides guidance for personal and home protection measures during heatwaves. Although studies in the USA, Australia and Europe have surveyed heat-related behaviours during heatwaves, few have been conducted in the UK. This study assesses personal and housing (at-home) behaviour and housing characteristics of the UK population during the 2013 heatwave. This paper analyses data from 1497 respondents of an online survey on heat protection measures and behaviour. Participants were asked questions about their behaviour during the 2013 heatwave, the characteristics of their current housing as well as about any negative health outcomes experienced due to the hot weather. We used multinomial logit regression to analyse personal and home heat protection behaviour and logistic regression to analyse characteristics of participants' current home (installed air conditioner, curtains etc.). We stratified the outcomes by age, sex, ethnicity, income, education and regional location. In 2013, for all heat-related illness (except tiredness), a higher proportion of those in the younger age groups reported symptoms compared with those in the older age groups. Women, higher income groups and those with higher education levels were found to be more likely to report always/often taking personal heat protective measures. The elderly were less likely to take some personal and home protective measures but were more likely to live in insulated homes and open windows at night to keep their home cool. Our study has found a high level of awareness of the actions to take during heatwaves in the UK, and has identified important demographic indicators of sections of the UK population that might benefit from additional or more targeted information. The health agencies should attempt to provide better information about heatwaves to those vulnerable (elderly, those at risk living in London, low income earners) or identify any barriers that might be preventing them from

Wired for Protection.

ERIC Educational Resources Information Center

Kennedy, Mike

2002-01-01

Describes how growing acceptance of security measures such as access-control cards, video surveillance, and biometric devices is allowing colleges to protect students and their belongings more effectively. (EV)

Prototype sampling system for measuring workplace protection factors for gases and vapors.

PubMed

Groves, William A; Reynolds, Stephen J

2003-05-01

A prototype sampling system for measuring respirator workplace protection factors (WPFs) was developed. Methods for measuring the concentration of contaminants inside respirators have previously been described; however, these studies have typically involved continuous sampling of aerosols. Our work focuses on developing an intermittent sampling system designed to measure the concentration of gases and vapors during inspiration. This approach addresses two potential problems associated with continuous sampling: biased results due to lower contaminant concentrations and high humidity in exhaled air. The system consists of a pressure transducer circuit designed to activate a pair of personal sampling pumps during inspiration based on differential pressure inside the respirator. One pump draws air from inside the respirator while the second samples the ambient air. Solid granular adsorbent tubes are used to trap the contaminants, making the approach applicable to a large number of gases and vapors. Laboratory testing was performed using a respirator mounted on a headform connected to a breathing machine producing a sinusoidal flow pattern with an average flow rate of 20 L/min and a period of 3 seconds. The sampling system was adjusted to activate the pumps when the pressure inside the respirator was less than -0.1 inch H(2)O. Quantitative fit-tests using human subjects were conducted to evaluate the effect of the sampling system on respirator performance. A total of 299 fit-tests were completed for two different types of respirators (half- and full-facepiece) from two different manufacturers (MSA and North). Statistical tests showed no significant differences between mean fit factors for respirators equipped with the sampling system versus unmodified respirators. Field testing of the prototype sampling system was performed in livestock production facilities and estimates of WPFs for ammonia were obtained. Results demonstrate the feasibility of this approach and will be

E3 Ubiquitin Ligase CHIP and NBR1-Mediated Selective Autophagy Protect Additively against Proteotoxicity in Plant Stress Responses

PubMed Central

Qi, Jingxia; Chi, Yingjin; Fan, Baofang; Yu, Jing-Quan; Chen, Zhixiang

2014-01-01

Plant stress responses require both protective measures that reduce or restore stress-inflicted damage to cellular structures and mechanisms that efficiently remove damaged and toxic macromolecules, such as misfolded and damaged proteins. We have recently reported that NBR1, the first identified plant autophagy adaptor with a ubiquitin-association domain, plays a critical role in plant stress tolerance by targeting stress-induced, ubiquitinated protein aggregates for degradation by autophagy. Here we report a comprehensive genetic analysis of CHIP, a chaperone-associated E3 ubiquitin ligase from Arabidopsis thaliana implicated in mediating degradation of nonnative proteins by 26S proteasomes. We isolated two chip knockout mutants and discovered that they had the same phenotypes as the nbr1 mutants with compromised tolerance to heat, oxidative and salt stresses and increased accumulation of insoluble proteins under heat stress. To determine their functional interactions, we generated chip nbr1 double mutants and found them to be further compromised in stress tolerance and in clearance of stress-induced protein aggregates, indicating additive roles of CHIP and NBR1. Furthermore, stress-induced protein aggregates were still ubiquitinated in the chip mutants. Through proteomic profiling, we systemically identified heat-induced protein aggregates in the chip and nbr1 single and double mutants. These experiments revealed that highly aggregate-prone proteins such as Rubisco activase and catalases preferentially accumulated in the nbr1 mutant while a number of light-harvesting complex proteins accumulated at high levels in the chip mutant after a relatively short period of heat stress. With extended heat stress, aggregates for a large number of intracellular proteins accumulated in both chip and nbr1 mutants and, to a greater extent, in the chip nbr1 double mutant. Based on these results, we propose that CHIP and NBR1 mediate two distinct but complementary anti

Influenza Virus Hemagglutinin Stalk-Specific Antibodies in Human Serum are a Surrogate Marker for In Vivo Protection in a Serum Transfer Mouse Challenge Model.

PubMed

Jacobsen, Henning; Rajendran, Madhusudan; Choi, Angela; Sjursen, Haakon; Brokstad, Karl A; Cox, Rebecca J; Palese, Peter; Krammer, Florian; Nachbagauer, Raffael

2017-09-19

The immunogenicity of current influenza virus vaccines is assessed by measuring an increase of influenza virus-specific antibodies in a hemagglutination inhibition assay. This method exclusively measures antibodies against the hemagglutinin head domain. While this domain is immunodominant, it has been shown that hemagglutination inhibition titers do not always accurately predict protection from disease. In addition, several novel influenza virus vaccines that are currently under development do not target the hemagglutinin head domain, but rather more conserved sites, including the hemagglutinin stalk. Importantly, antibodies against the hemagglutinin stalk do not show activity in hemagglutination inhibition assays and will require different methods for quantification. In this study, we tested human serum samples from a seasonal influenza virus vaccination trial and an avian H5N1 virus vaccination trial for antibody activities in multiple types of assays, including binding assays and also functional assays. We then performed serum transfer experiments in mice which then received an H1N1 virus challenge to assess the in vivo protective effects of the antibodies. We found that hemagglutinin-specific antibody levels measured in an enzyme-linked immunosorbent assay (ELISA) correlated well with protection from weight loss in mice. In addition, we found that weight loss was also inversely correlated with the level of serum antibody-dependent cellular cytotoxicity (ADCC) as measured in a reporter assay. These findings indicate that protection is in part conferred by Fc-dependent mechanisms. In conclusion, ELISAs can be used to measure hemagglutinin-specific antibody levels that could serve as a surrogate marker of protection for universal influenza virus vaccines. IMPORTANCE Influenza viruses are a serious concern for public health and cause a large number of deaths worldwide every year. Current influenza virus vaccines can confer protection from disease, but they often

Rack protection monitor

DOEpatents

Orr, Stanley G.

2000-01-01

A hardwired, fail-safe rack protection monitor utilizes electromechanical relays to respond to the detection by condition sensors of abnormal or alarm conditions (such as smoke, temperature, wind or water) that might adversely affect or damage equipment being protected. When the monitor is reset, the monitor is in a detection mode with first and second alarm relay coils energized. If one of the condition sensors detects an abnormal condition, the first alarm relay coil will be de-energized, but the second alarm relay coil will remain energized. This results in both a visual and an audible alarm being activated. If a second alarm condition is detected by another one of the condition sensors while the first condition sensor is still detecting the first alarm condition, both the first alarm relay coil and the second alarm relay coil will be de-energized. With both the first and second alarm relay coils de-energized, both a visual and an audible alarm will be activated. In addition, power to the protected equipment will be terminated and an alarm signal will be transmitted to an alarm central control. The monitor can be housed in a separate enclosure so as to provide an interface between a power supply for the protected equipment and the protected equipment.

An international marine-atmospheric {sup 222}Rn measurement intercomparison in Bermuda. Part 1: NIST calibration and methodology for standardized sample additions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colle, R.; Unterweger, M.P.; Hodge, P.A.

1996-01-01

As part of an international {sup 222}Rn measurement intercomparison conducted at Bermuda in October 1991, NIST provided standardized sample additions of known, but undisclosed (blind) {sup 222}Rn concentrations that could be related to US national standards. The standardized sample additions were obtained with a calibrated {sup 226}Ra source and a specially-designed manifold used to obtain well-known dilution factors from simultaneous flow-rate measurements. The additions were introduced over sampling periods of several hours (typically 4 h) into a common streamline on a sampling tower used by the participating laboratories for their measurements. The standardized {sup 222}Rn activity concentrations for the intercomparisonmore » ranged from approximately 2.5 Bq {center_dot} m{sup {minus}3} to 35 Bq {center_dot} m{sup {minus}3} (of which the lower end of this range approached concentration levels for ambient Bermudian air) and had overall uncertainties, approximating a 3 standard deviation uncertainty interval, of about 6% to 13%. This paper describes the calibration and methodology for the standardized sample additions.« less

Audit Report on "Protection of the Department of Energy's Unclassified Sensitive Electronic Information"

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

, identified opportunities to strengthen the protection of all types of sensitive unclassified electronic information and reduce the risk that such data could fall into the hands of individuals with malicious intent. In particular, for the seven sites we reviewed: (1) Four sites had either not ensured that sensitive information maintained on mobile devices was encrypted. Or, they had improperly permitted sensitive unclassified information to be transmitted unencrypted through email or to offsite backup storage facilities; (2) One site had not ensured that laptops taken on foreign travel, including travel to sensitive countries, were protected against security threats; and, (3) Although required by the OMB since 2003, we learned that programs and sites were still working to complete Privacy Impact Assessments - analyses designed to examine the risks and ramifications of using information systems to collect, maintain, and disseminate personal information. Our testing revealed that the weaknesses identified were attributable, at least in part, to Headquarters programs and field sites that had not implemented existing policies and procedures requiring protection of sensitive electronic information. In addition, a lack of performance monitoring contributed to the inability of the Department and the National Nuclear Security Administration (NNSA) to ensure that measures were in place to fully protect sensitive information. As demonstrated by previous computer intrusion-related data losses throughout the Department, without improvements, the risk or vulnerability for future losses remains unacceptably high. In conducting this audit, we recognized that data encryption and related techniques do not provide absolute assurance that sensitive data is fully protected. For example, encryption will not necessarily protect data in circumstances where organizational access controls are weak or are circumvented through phishing or other malicious techniques. However, as noted by NIST, when used

Protecting and Respecting the Vulnerable: Existing Regulations or Further Protections?

PubMed Central

Solomon, Stephanie R.

2013-01-01

Scholars and policymakers continue to struggle over the meaning of the word “vulnerable” in the context of research ethics. One major reason for the stymied discussions regarding vulnerable populations is that there is no clear distinction between accounts of research vulnerabilities that exist for certain populations and discussions of research vulnerabilities that require special regulations in the context of research ethics policies. I suggest an analytic process by which to ascertain whether particular vulnerable populations should be contenders for additional regulatory protections. I apply this process to two vulnerable populations: the cognitively vulnerable and the economically vulnerable. I conclude that a subset of the cognitively vulnerable require extra protections while the economically vulnerable should be protected by implementing existing regulations more appropriately and rigorously. Unless or until the informed consent process is more adequately implemented and the distributive justice requirement of the Belmont Report is emphasized and operationalized, the economically disadvantaged will remain particularly vulnerable to the harm of exploitation in research. PMID:23329228

Protecting and respecting the vulnerable: existing regulations or further protections?

PubMed

Solomon, Stephanie R

2013-02-01

Scholars and policymakers continue to struggle over the meaning of the word "vulnerable" in the context of research ethics. One major reason for the stymied discussions regarding vulnerable populations is that there is no clear distinction between accounts of research vulnerabilities that exist for certain populations and discussions of research vulnerabilities that require special regulations in the context of research ethics policies. I suggest an analytic process by which to ascertain whether particular vulnerable populations should be contenders for additional regulatory protections. I apply this process to two vulnerable populations: the cognitively vulnerable and the economically vulnerable. I conclude that a subset of the cognitively vulnerable require extra protections while the economically vulnerable should be protected by implementing existing regulations more appropriately and rigorously. Unless or until the informed consent process is more adequately implemented and the distributive justice requirement of the Belmont Report is emphasized and operationalized, the economically disadvantaged will remain particularly vulnerable to the harm of exploitation in research.

A Comparative Study of Listening Comprehension Measures in English as an Additional Language and Native English-Speaking Primary School Children

ERIC Educational Resources Information Center

McKendry, Mairead Grainne; Murphy, Victoria A.

2011-01-01

The aim of this study was to investigate the suitability of different measures of listening comprehension for Years 2, 3 and 4 children with English as an additional language (EAL). Non-standardised uses of reading comprehension measures are often employed as proxy measures of listening comprehension, i.e. for purposes for which they were not…

Additional Value of CH4 Measurement in a Combined 13C/H2 Lactose Malabsorption Breath Test: A Retrospective Analysis

PubMed Central

Houben, Els; De Preter, Vicky; Billen, Jaak; Van Ranst, Marc; Verbeke, Kristin

2015-01-01

The lactose hydrogen breath test is a commonly used, non-invasive method for the detection of lactose malabsorption and is based on an abnormal increase in breath hydrogen (H2) excretion after an oral dose of lactose. We use a combined 13C/H2 lactose breath test that measures breath 13CO2 as a measure of lactose digestion in addition to H2 and that has a better sensitivity and specificity than the standard test. The present retrospective study evaluated the results of 1051 13C/H2 lactose breath tests to assess the impact on the diagnostic accuracy of measuring breath CH4 in addition to H2 and 13CO2. Based on the 13C/H2 breath test, 314 patients were diagnosed with lactase deficiency, 138 with lactose malabsorption or small bowel bacterial overgrowth (SIBO), and 599 with normal lactose digestion. Additional measurement of CH4 further improved the accuracy of the test as 16% subjects with normal lactose digestion and no H2-excretion were found to excrete CH4. These subjects should have been classified as subjects with lactose malabsorption or SIBO. In conclusion, measuring CH4-concentrations has an added value to the 13C/H2 breath test to identify methanogenic subjects with lactose malabsorption or SIBO. PMID:26371034

Lightning Protection

NASA Technical Reports Server (NTRS)

1991-01-01

Lightning Technologies, Inc., Pittsfield, MA, - a spinoff company founded by president J. Anderson Plumer, a former NASA contractor employee who developed his expertise with General Electric Company's High Voltage Laboratory - was a key player in Langley Research Center's Storm Hazards Research Program. Lightning Technologies used its NASA acquired experience to develop protective measures for electronic systems and composite structures on aircraft, both of which are particularly susceptible to lightning damage. The company also provides protection design and verification testing services for complete aircraft systems or individual components. Most aircraft component manufacturers are among Lightning Technologies' clients.

INTELLIGENT PROCESSING EQUIPMENT WITHIN THE ENVIRONMENTAL PROTECTION AGENCY

EPA Science Inventory

Protection of the environment and environmental remediation requires the cooperation -at all levels- of government and industry. ntelligent processing equipment, in addition to other artificial intelligence based tools, has been used by the Environmental Protection Agency to prov...

School Sun Protection Policies: Measure Development and Assessments in Two Regions of the United States

PubMed Central

Buller, David B.; French, Simone A.; Buller, Mary K.; Ashley, Jeff L.

2012-01-01

BACKGROUND In 2002, the US Centers for Disease Control and Prevention recommended that schools adopt policies that reduce exposure of children to ultraviolet radiation to prevent skin cancer. We report here the development of a school sun safety policy measure and baseline descriptive statistics from the assessment of written policies collected in 2005-2007 from public school districts that enrolled in a randomized trial evaluating a policy promotion program. METHODS Written policies were collected from 103 of 112 school districts in Colorado and Southern California prior to randomization. We developed methods for selecting policy headings/sections topics likely to contain sun safety policies for students and for assessing the presence, strength, and intent of policies. Trained coders assessed the content of each policy document. RESULTS Overall, 31% of districts had a policy addressing sun safety, most commonly, protective clothing, hats, sunscreen, and education at baseline. More California districts (51.9%) had these policies than Colorado districts (7.8%, p<.001). Policy scores were highest in districts with fewer Caucasian students (b=-0.02, p=.022) in Colorado (b=-0.02, p=.007) but not California (b=0.01, p=.299). CONCLUSION The protocol for assessing sun safety policy in board-approved written policy documents had several advantages over surveys of school officials. Sun protection policies were uncommon and limited in scope in 2005-2007. California has been more active at legislating school policy than Colorado. School district policies remain a largely untapped method for promoting the sun protection of children. PMID:23061553

Development of the Updated Environmental Protection Agency Manual of Protective Action Guides (PAGS) and Protective Actions for Nuclear Incidents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, L.M.

2008-07-01

As a student intern with the United States Environmental Protection Agency (EPA) Headquarters, the author was trained in the National Response Plan (NRP) and assisted in the editing of the new (unpublished) EPA Protective Action Guides (PAGs) [1] which has been revised in light of the perceived post 9/11 potential for 'Dirty Bomb' and 'Improvised Nuclear Device' attacks on civilian areas. Technical aspects and the public policy aspects of developing the new guides are discussed. Early Phase initial responses discussed include: Notification of state and/or local authorities, immediate evacuation/sheltering prior to release information or measurements, monitoring of releases and exposuremore » rate measurements, estimation of dose consequences, implementation of protective actions in other areas. The new PAG clarifies the use of 1992 PAGs [2] for incidents other than nuclear power plant accidents, lowers projected thyroid dose for potassium iodine (KI), provides drinking water guidance, includes guidance for long-term site restoration, and updates dosimetry from ICRP 26 to ICRP 60. (authors)« less

Assessing different measures of population-level vaccine protection using a case-control study.

PubMed

Ali, Mohammad; You, Young Ae; Kanungo, Suman; Manna, Byomkesh; Deen, Jacqueline L; Lopez, Anna Lena; Wierzba, Thomas F; Bhattacharya, Sujit K; Sur, Dipika; Clemens, John D

2015-11-27

Case-control studies have not been examined for their utility in assessing population-level vaccine protection in individually randomized trials. We used the data of a randomized, placebo-controlled trial of a cholera vaccine to compare the results of case-control analyses with those of cohort analyses. Cases of cholera were selected from the trial population followed for three years following dosing. For each case, we selected 4 age-matched controls who had not developed cholera. For each case and control, GIS was used to calculate vaccine coverage of individuals in a surrounding "virtual" cluster. Specific selection strategies were used to evaluate the vaccine protective effects. 66,900 out of 108,389 individuals received two doses of the assigned regimen. For direct protection among subjects in low vaccine coverage clusters, we observed 78% (95% CI: 47-91%) protection in a cohort analysis and 84% (95% CI: 60-94%) in case-control analysis after adjusting for confounding factors. Using our GIS-based approach, estimated indirect protection was 52% (95% CI: 10-74%) in cohort and 76% (95% CI: 47-89%) in case control analysis. Estimates of total and overall effectiveness were similar for cohort and case-control analyses. The findings show that case-control analyses of individually randomized vaccine trials may be used to evaluate direct as well as population-level vaccine protection. Copyright © 2015. Published by Elsevier Ltd.

Armored garment for protecting

DOEpatents

Purvis, James W [Albuquerque, NM; Jones, II, Jack F.; Whinery, Larry D [Albuquerque, NM; Brazfield, Richard [Albuquerque, NM; Lawrie, Catherine [Tijeras, NM; Lawrie, David [Tijeras, NM; Preece, Dale S [Watkins, CO

2009-08-11

A lightweight, armored protective garment for protecting an arm or leg from blast superheated gases, blast overpressure shock, shrapnel, and spall from a explosive device, such as a Rocket Propelled Grenade (RPG) or a roadside Improvised Explosive Device (IED). The garment has a ballistic sleeve made of a ballistic fabric, such as an aramid fiber (e.g., KEVLAR.RTM.) cloth, that prevents thermal burns from the blast superheated gases, while providing some protection from fragments. Additionally, the garment has two or more rigid armor inserts that cover the upper and lower arm and protect against high-velocity projectiles, shrapnel and spall. The rigid inserts can be made of multiple plies of a carbon/epoxy composite laminate. The combination of 6 layers of KEVLAR.RTM. fabric and 28 plies of carbon/epoxy laminate inserts (with the inserts being sandwiched in-between the KEVLAR.RTM. layers), can meet the level IIIA fragmentation minimum V.sub.50 requirements for the US Interceptor Outer Tactical Vest.

Insulin/NFκB protects against ischemia-induced necrotic cardiomyocyte death.

PubMed

Díaz, Ariel; Humeres, Claudio; González, Verónica; Gómez, María Teresa; Montt, Natalia; Sanchez, Gina; Chiong, Mario; García, Lorena

2015-11-13

In the heart, insulin controls key functions such as metabolism, muscle contraction and cell death. However, all studies have been focused on insulin action during reperfusion. Here we explore the cardioprotective action of this hormone during ischemia. Rat hearts were perfused ex vivo with an ischemia/reperfusion Langendorff model in absence or presence of insulin. Additionally, cultured rat cardiomyocytes were exposed to simulated ischemia in the absence or presence of insulin. Cytoprotective effects were measured by myocardial infarct size, trypan blue exclusion, released LDH and DNA fragmentation by flow cytometry. We found that insulin protected against cardiac ischemia ex vivo and in vitro. Moreover, insulin protected cardiomyocytes from simulated ischemia by reducing necrotic cell death. Protective effects of insulin were dependent of Akt and NFκB. These novel results show that insulin reduces ischemia-induced cardiomyocyte necrosis through an Akt/NF-κB dependent mechanism. These novel findings clarify the role of insulin during ischemia and further support its use in early GIK perfusion to treat myocardial infarction. Copyright © 2015 Elsevier Inc. All rights reserved.

30 CFR 75.1103-10 - Fire suppression systems; additional requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements. 75.1103-10 Section 75.1103-10 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT... Protection § 75.1103-10 Fire suppression systems; additional requirements. For each conveyor belt flight... per minute, an additional cache of the materials specified in § 75.1103-9(a)(1), (2), and (3) shall be...

Insertion Loss of Personal Protective Clothing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shull D.J.; Biesel, V.B.; Cunefare, K.A.

1999-05-13

'The use of personal protective clothing that covers the head is a common practice in many industries. Such personal protective clothing will impact the sound pressure level and the frequency content of sounds to which the wearer will be exposed. The use of such clothing, then, may impact speech and alarm audibility. A measure of the impact of such clothing is its insertion loss. Insertion loss measurements were performed on four types of personal protective clothing in use by Westinghouse Savannah River Company personnel which utilize cloth and plastic hood configurations to protect the head. All clothing configurations tested atmore » least partially cover the ears. The measurements revealed that insertion loss of the items tested was notable at frequencies above 1000 Hz only and was a function of material stiffness and acoustic flanking paths to the ear. Further, an estimate of the clothing''s noise reduction rating reveals poor performance in that regard, even though the insertion loss of the test articles was significant at frequencies at and above 1000 Hz.'« less

15 CFR 766.11 - Matter protected against disclosure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 2 2014-01-01 2014-01-01 false Matter protected against disclosure... ADMINISTRATIVE ENFORCEMENT PROCEEDINGS § 766.11 Matter protected against disclosure. (a) Protective measures. It... concern, and that are to be protected against disclosure. Accordingly, and without limiting the discretion...

Protection against Recurrent Stroke with Resveratrol: Endothelial Protection

PubMed Central

Clark, Darren; Tuor, Ursula I.; Thompson, Roger; Institoris, Adam; Kulynych, Angela; Zhang, Xu; Kinniburgh, David W.; Bari, Ferenc; Busija, David W.; Barber, Philip A.

2012-01-01

Despite increased risk of a recurrent stroke following a minor stroke, information is minimal regarding the interaction between injurious mild cerebral ischemic episodes and the possible treatments which might be effective. The aim of the current study was to investigate recurrent ischemic stroke and whether resveratrol, a nutritive polyphenol with promising cardio- and neuro- protective properties, could ameliorate the associated brain damage. Experiments in adult rats demonstrated that a mild ischemic stroke followed by a second mild cerebral ischemia exacerbated brain damage, and, daily oral resveratrol treatment after the first ischemic insult reduced ischemic cell death with the recurrent insult (P<0.002). Further investigation demonstrated reduction of both inflammatory changes and markers of oxidative stress in resveratrol treated animals. The protection observed with resveratrol treatment could not be explained by systemic effects of resveratrol treatment including effects either on blood pressure or body temperature measured telemetrically. Investigation of resveratrol effects on the blood-brain barrier in vivo demonstrated that resveratrol treatment reduced blood-brain barrier disruption and edema following recurrent stroke without affecting regional cerebral blood flow. Investigation of the mechanism in primary cell culture studies demonstrated that resveratrol treatment significantly protected endothelial cells against an in vitro ‘ischemia’ resulting in improved viability against oxygen and glucose deprivation (39.6±6.6% and 81.3±9.5% in vehicle and resveratrol treated cells, respectively). An inhibition of nitric oxide synthesis did not prevent the improved cell viability following oxygen glucose deprivation but SIRT-1 inhibition with sirtinol partially blocked the protection (P<0.001) suggesting endothelial protection is to some extent SIRT-1 dependent. Collectively, the results support that oral resveratrol treatment provides a low risk

Intracellular redox state determines whether nitric oxide is toxic or protective to rat oligodendrocytes in culture.

PubMed

Rosenberg, P A; Li, Y; Ali, S; Altiok, N; Back, S A; Volpe, J J

1999-08-01

We found that several nitric oxide donors had similar potency in killing mature and immature forms of oligodendrocytes (OLs). Because of the possibility of interaction of nitric oxide with intracellular thiols, we tested the effect of the nitrosonium ion donor S-nitrosylglutathione (SNOG) in OL cultures in the setting of cystine deprivation, which has been shown to cause intracellular glutathione depletion. Surprisingly, the presence of 200 microM SNOG completely protected OLs against the toxicity of cystine depletion. This protection appeared to be due to nitric oxide, because it could be blocked by hemoglobin and potentiated by inclusion of superoxide dismutase. We tested the effect of three additional NO* donors and found that protection was not seen with diethylamine NONOate, a donor with a half-life measured in minutes, but was seen with dipropylenetriamine NONOate and diethylaminetriamine NONOate, donors with half-lives measured in hours. This need for donors with longer half-lives for the protective effect suggested that NO* was required when intracellular thiol concentrations were falling, a process evolving over hours in medium depleted of cystine. These studies suggest a novel protective role for nitric oxide in oxidative stress injury and raise the possibility that intracerebral nitric oxide production might be a mechanism of defense against oxidative stress injury in OLs.

[Food additives and healthiness].

PubMed

Heinonen, Marina

2014-01-01

Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

Ion Mobility-Derived Collision Cross Section As an Additional Measure for Lipid Fingerprinting and Identification

PubMed Central

2014-01-01

Despite recent advances in analytical and computational chemistry, lipid identification remains a significant challenge in lipidomics. Ion-mobility spectrometry provides an accurate measure of the molecules’ rotationally averaged collision cross-section (CCS) in the gas phase and is thus related to ionic shape. Here, we investigate the use of CCS as a highly specific molecular descriptor for identifying lipids in biological samples. Using traveling wave ion mobility mass spectrometry (MS), we measured the CCS values of over 200 lipids within multiple chemical classes. CCS values derived from ion mobility were not affected by instrument settings or chromatographic conditions, and they were highly reproducible on instruments located in independent laboratories (interlaboratory RSD < 3% for 98% of molecules). CCS values were used as additional molecular descriptors to identify brain lipids using a variety of traditional lipidomic approaches. The addition of CCS improved the reproducibility of analysis in a liquid chromatography-MS workflow and maximized the separation of isobaric species and the signal-to-noise ratio in direct-MS analyses (e.g., “shotgun” lipidomics and MS imaging). These results indicate that adding CCS to databases and lipidomics workflows increases the specificity and selectivity of analysis, thus improving the confidence in lipid identification compared to traditional analytical approaches. The CCS/accurate-mass database described here is made publicly available. PMID:25495617

Are the performance overestimates given by boys with ADHD self-protective?

PubMed

Ohan, Jeneva L; Johnston, Charlotte

2002-06-01

Tested the self-protective hypothesis that boys with attention deficit hyperactivity disorder (ADHD) overestimate their performance to protect a positive self-image. We examined the impact of performance feedback on the social and academic performance self-perceptions of 45 boys with and 43 boys without ADHD ages 7 to 12. Consistent with the self-protective hypothesis, positive feedback led to increases in social performance estimates in boys without ADHD but to decreases in estimates given by boys with ADHD. This suggests that boys with ADHD can give more realistic self-appraisals when their self-image has been bolstered. In addition, social performance estimates in boys with ADHD were correlated with measures of self-esteem and positive presentation bias. In contrast, for academic performance estimates, boys in both groups increased their performance estimates after receiving positive versus average or no feedback, and estimates were not correlated with self-esteem or social desirability for boys with ADHD. We conclude that the self-protective hypothesis can account for social performance overestimations given by boys with ADHD but that other factors may better account for their academic performance overestimates.

Rail passenger equipment collision tests : analysis of occupant protection measurements

DOT National Transportation Integrated Search

2000-01-01

The Federal Railroad Administration has been conducting research : on occupant protection in train collisions. As part of this research, : computer simulations have been performed, passenger seats have been sled tested, and two full-scale collision t...

Keeping Children Safe: OJJDP's Child Protection Division.

ERIC Educational Resources Information Center

Cullen, Thomas

More than two decades of research have pointed to the connection between childhood maltreatment and delinquency. In addition, recent research confirms that harm is inflicted on children who are subjected to family and community violence. The Child Protection Division was created in an effort to bring child protection to the forefront and to…

Current status of radiological protection at nuclear power stations in Japan.

PubMed

Suzuki, Akira; Hori, Shunsuke

2011-07-01

The radiation dose to workers at nuclear power stations (NPSs) in Japan was drastically reduced between the late-1970s and the early-1990s by continuous dose-reduction programmes. The total collective dose of radiation workers in FY 2008 was 84.04 person Sv, while the average collective dose was 1.5 person Sv per reactor. The average annual individual dose was 1.1 mSv and the maximum annual individual dose was 19.5 mSv. These values are sufficiently lower than the regulatory dose limits. Radioactive effluent released from NPSs is already so trivial that additional protective measures will not be necessary. Experience in radiation protection at NPSs has been accumulated over 40 y and will be very useful in establishing a rational radiation control system in the future.

40 CFR 80.1613 - Standards and other requirements for gasoline additive manufacturers and blenders.

Code of Federal Regulations, 2014 CFR

2014-07-01

... gasoline additive manufacturers and blenders. 80.1613 Section 80.1613 Protection of Environment... Gasoline Sulfur § 80.1613 Standards and other requirements for gasoline additive manufacturers and blenders. Gasoline additive manufacturers and blenders must meet the following requirements: (a) Gasoline additive...

Detection of allergenic additives in processed meat products.

PubMed

Spychaj, Anita; Pospiech, Edward; Iwańska, Ewa; Montowska, Magdalena

2018-04-19

At present, allergic response to food components is an increasing problem all over the world. Therefore it is important to protect people vulnerable to food allergens against accidental and unintended consumption of products containing allergic ingredients. The meat industry commonly uses various allergic additives in production of processed products, i.e. legumes (soy, peas, beans), milk and egg preparations, cereals containing gluten (wheat, rye, barley and oats), and spices (celery and mustard). These meat additives have specific technological properties which help to create a texture, flavour profile or affect the nutritional value, although some of them, such as soy, mustard, milk and egg white proteins can cause severe allergic reactions. The aim of this paper is to discuss the application of various recently established methods of detection of allergenic additives in processed meat products, for instance cold cuts and sausages. The new methods are based mainly on protein, DNA and also isoflavones or phytic acid analysis. The article also characterises the latest trends in the development of research on the methods which would enable quick and reliable identification of targeted allergens in meat products. This article is protected by copyright. All rights reserved.

Novel method of measurement of radon exhalation from building materials.

PubMed

Awhida, A; Ujić, P; Vukanac, I; Đurašević, M; Kandić, A; Čeliković, I; Lončar, B; Kolarž, P

2016-11-01

In the era of the energy saving policy (i.e. more air tight doors and windows), the radon exhaled from building materials tends to increase its concentration in indoor air, which increases the importance of the measurement of radon exhalation from building materials. This manuscript presents a novel method of the radon exhalation measurement using only a HPGe detector or any other gamma spectrometer. Comparing it with the already used methods of radon exhalation measurements, this method provides the measurement of the emanation coefficient, the radon diffusion length and the radon exhalation rate, all within the same measurement, which additionally defines material's radon protective properties. Furthermore it does not necessitate additional equipment for radon or radon exhalation measurement, which simplifies measurement technique, and thus potentially facilitates introduction of legal obligation for radon exhalation determination in building materials. Copyright © 2016 Elsevier Ltd. All rights reserved.

Methods for calculating Protection Equality for conservation planning

PubMed Central

Kuempel, Caitlin D.; McGowan, Jennifer; Beger, Maria; Possingham, Hugh P.

2017-01-01

Protected Areas (PAs) are a central part of biodiversity conservation strategies around the world. Today, PAs cover c15% of the Earth’s land mass and c3% of the global oceans. These numbers are expected to grow rapidly to meet the Convention on Biological Diversity’s Aichi Biodiversity target 11, which aims to see 17% and 10% of terrestrial and marine biomes protected, respectively, by 2020. This target also requires countries to ensure that PAs protect an “ecologically representative” sample of their biodiversity. At present, there is no clear definition of what desirable ecological representation looks like, or guidelines of how to standardize its assessment as the PA estate grows. We propose a systematic approach to measure ecological representation in PA networks using the Protection Equality (PE) metric, which measures how equally ecological features, such as habitats, within a country’s borders are protected. We present an R package and two Protection Equality (PE) measures; proportional to area PE, and fixed area PE, which measure the representativeness of a country’s PA network. We illustrate the PE metrics with two case studies: coral reef protection across countries and ecoregions in the Coral Triangle, and representation of ecoregions of six of the largest countries in the world. Our results provide repeatable transparency to the issue of representation in PA networks and provide a starting point for further discussion, evaluation and testing of representation metrics. They also highlight clear shortcomings in current PA networks, particularly where they are biased towards certain assemblage types or habitats. Our proposed metrics should be used to report on measuring progress towards the representation component of Aichi Target 11. The PE metrics can be used to measure the representation of any kind of ecological feature including: species, ecoregions, processes or habitats. PMID:28199341

Methods for calculating Protection Equality for conservation planning.

PubMed

Chauvenet, Alienor L M; Kuempel, Caitlin D; McGowan, Jennifer; Beger, Maria; Possingham, Hugh P

2017-01-01

Protected Areas (PAs) are a central part of biodiversity conservation strategies around the world. Today, PAs cover c15% of the Earth's land mass and c3% of the global oceans. These numbers are expected to grow rapidly to meet the Convention on Biological Diversity's Aichi Biodiversity target 11, which aims to see 17% and 10% of terrestrial and marine biomes protected, respectively, by 2020. This target also requires countries to ensure that PAs protect an "ecologically representative" sample of their biodiversity. At present, there is no clear definition of what desirable ecological representation looks like, or guidelines of how to standardize its assessment as the PA estate grows. We propose a systematic approach to measure ecological representation in PA networks using the Protection Equality (PE) metric, which measures how equally ecological features, such as habitats, within a country's borders are protected. We present an R package and two Protection Equality (PE) measures; proportional to area PE, and fixed area PE, which measure the representativeness of a country's PA network. We illustrate the PE metrics with two case studies: coral reef protection across countries and ecoregions in the Coral Triangle, and representation of ecoregions of six of the largest countries in the world. Our results provide repeatable transparency to the issue of representation in PA networks and provide a starting point for further discussion, evaluation and testing of representation metrics. They also highlight clear shortcomings in current PA networks, particularly where they are biased towards certain assemblage types or habitats. Our proposed metrics should be used to report on measuring progress towards the representation component of Aichi Target 11. The PE metrics can be used to measure the representation of any kind of ecological feature including: species, ecoregions, processes or habitats.

Apparatus for measurement of critical current in superconductive tapes

DOEpatents

Coulter, J. Yates; DePaula, Raymond

2002-01-01

A cryogenic linear positioner which is primarily used for characterizing coated conductor critical current homogeneity at 75K is disclosed. Additionally, this tool can be used to measure the positional dependence of the coated conductor resistance at room temperature, and the room temperature resistance of the underlying YBCB coating without the overlaying protective cover of silver.

Fire Protection in Educational Occupancies.

ERIC Educational Resources Information Center

Gervais, Romeo P.

2000-01-01

Discusses the origins of school fires and the components of the fire protection code called the Life Safety Code (LSC). Three of the following LSC requirements are described: means of egress; protection from hazards; and fire suppression and alarm systems. Information on who starts fires is highlighted along with preventive measures. (GR)

A global framework for future costs and benefits of river-flood protection in urban areas

NASA Astrophysics Data System (ADS)

Ward, Philip J.; Jongman, Brenden; Aerts, Jeroen C. J. H.; Bates, Paul D.; Botzen, Wouter J. W.; Diaz Loaiza, Andres; Hallegatte, Stephane; Kind, Jarl M.; Kwadijk, Jaap; Scussolini, Paolo; Winsemius, Hessel C.

2017-09-01

Floods cause billions of dollars of damage each year, and flood risks are expected to increase due to socio-economic development, subsidence, and climate change. Implementing additional flood risk management measures can limit losses, protecting people and livelihoods. Whilst several models have been developed to assess global-scale river-flood risk, methods for evaluating flood risk management investments globally are lacking. Here, we present a framework for assessing costs and benefits of structural flood protection measures in urban areas around the world. We demonstrate its use under different assumptions of current and future climate change and socio-economic development. Under these assumptions, investments in dykes may be economically attractive for reducing risk in large parts of the world, but not everywhere. In some regions, economically efficient investments could reduce future flood risk below today’s levels, in spite of climate change and economic growth. We also demonstrate the sensitivity of the results to different assumptions and parameters. The framework can be used to identify regions where river-flood protection investments should be prioritized, or where other risk-reducing strategies should be emphasized.

Ecosystem-based analysis of a marine protected area where fisheries and protected species coexist.

PubMed

Espinoza-Tenorio, Alejandro; Montaño-Moctezuma, Gabriela; Espejel, Ileana

2010-04-01

The Gulf of California Biosphere Reserve (UGC&CRDBR) is a Marine Protected Area that was established in 1993 with the aim of preserving biodiversity and remediating environmental impacts. Because remaining vigilant is hard and because regulatory measures are difficult to enforce, harvesting has been allowed to diminish poaching. Useful management strategies have not been implemented, however, and conflicts remain between conservation legislation and the fisheries. We developed a transdisciplinary methodological scheme (pressure-state-response, loop analysis, and Geographic Information System) that includes both protected species and fisheries modeled together in a spatially represented marine ecosystem. We analyzed the response of this marine ecosystem supposing that conservation strategies were successful and that the abundance of protected species had increased. The final aim of this study was to identify ecosystem-level management alternatives capable of diminishing the conflict between conservation measures and fisheries. This methodological integration aimed to understand the functioning of the UGC&CRDBR community as well as to identify implications of conservation strategies such as the recovery of protected species. Our results suggest research hypotheses related to key species that should be protected within the ecosystem, and they point out the importance of considering spatial management strategies. Counterintuitive findings underline the importance of understanding how the community responds to disturbances and the effect of indirect pathways on the abundance of ecosystem constituents. Insights from this research are valuable in defining policies in marine reserves where fisheries and protected species coexist.

Ecosystem-Based Analysis of a Marine Protected Area Where Fisheries and Protected Species Coexist

NASA Astrophysics Data System (ADS)

Espinoza-Tenorio, Alejandro; Montaño-Moctezuma, Gabriela; Espejel, Ileana

2010-04-01

The Gulf of California Biosphere Reserve (UGC&CRDBR) is a Marine Protected Area that was established in 1993 with the aim of preserving biodiversity and remediating environmental impacts. Because remaining vigilant is hard and because regulatory measures are difficult to enforce, harvesting has been allowed to diminish poaching. Useful management strategies have not been implemented, however, and conflicts remain between conservation legislation and the fisheries. We developed a transdisciplinary methodological scheme (pressure-state-response, loop analysis, and Geographic Information System) that includes both protected species and fisheries modeled together in a spatially represented marine ecosystem. We analyzed the response of this marine ecosystem supposing that conservation strategies were successful and that the abundance of protected species had increased. The final aim of this study was to identify ecosystem-level management alternatives capable of diminishing the conflict between conservation measures and fisheries. This methodological integration aimed to understand the functioning of the UGC&CRDBR community as well as to identify implications of conservation strategies such as the recovery of protected species. Our results suggest research hypotheses related to key species that should be protected within the ecosystem, and they point out the importance of considering spatial management strategies. Counterintuitive findings underline the importance of understanding how the community responds to disturbances and the effect of indirect pathways on the abundance of ecosystem constituents. Insights from this research are valuable in defining policies in marine reserves where fisheries and protected species coexist.

Protection by Isoprene against Singlet Oxygen in Leaves

PubMed Central

Affek, Hagit P.; Yakir, Dan

2002-01-01

Isoprene (2-methyl-1,3-butadiene) protection against effects of singlet oxygen was investigated in Myrtus communis and Rhamnus alaternus. In M. communis, singlet oxygen produced in the leaves by Rose Bengal (RB) led to a 65% decrease in net assimilation rates within 3 h, whereas isoprene emission rates showed either a 30% decrease at ambient CO2 concentrations or a 70% increase under high CO2. In both cases, these changes led to an increase in calculated internal isoprene concentrations. The isoprene protection effect was directly demonstrated by fumigation of young (non-emitting) leaves, treated with RB or bromoxynil (simulating photoinhibition). There was 42% and 29% reduction in the damage to net assimilation compared with non-fumigated leaves for RB or bromoxynil, respectively. In R. alaternus, similar effects of RB on net assimilation were observed, and additional fluorescence measurements showed a significantly smaller decrease in Fv/Fm in isoprene-fumigated young leaves treated with RB (from 0.78 to 0.52), compared with non-fumigated leaves (from 0.77 to 0.27). The internal isoprene concentrations used in this study and possible rate of 1O2 production in leaves indicate that the protective effects observed should be beneficial also under natural conditions. PMID:12011357

Evaluation of the persistence of vaccine-induced protection with human vaccines.

PubMed

Vidor, E

2010-01-01

The persistence of protection induced by vaccines is a key aspect of the implementation of human vaccination policies, particularly for ageing populations. At the time of initial licensure, the duration of protection induced by a vaccine is generally only documented by longitudinal follow up of cohorts of subjects enrolled in the pre-licensure trials over a period of 1-5 years. The follow up of these cohorts provides two types of data: antibody kinetics (or another clinically relevant immunological parameter) over time and the disease incidence. Generally, the latter trials, if implemented during the pre-licensure period, are designed to follow-up cohorts in order to demonstrate vaccine efficacy above the minimal level required for the license. For vaccines already licensed, additional tools exist. The use of immunological surrogate markers of protection is a practical way to monitor the duration of protection. Measuring the persistence of circulating antibodies is widely used in human vaccines. For several vaccines, observed data have allowed the creation of mathematical models to predict the antibody persistence over periods of time longer than those effectively documented. Clinical trials assessing the capacity of the immune system to mount a quick anamnestic response upon re-stimulation a long time after initial priming (measurement of immune memory) is also a tool employed to document the duration of protection. The waning of protection can also be demonstrated by an increase of disease incidence in the subsequent 'time-to-last-vaccine administration' age segments. Seroprevalence studies in a given age group of people that were vaccinated under real-life conditions are another way to document the persistence of protection. Finally, case-control studies in outbreak situations or in situations of persisting endemicity can also be used to document the persistence of the vaccine efficacy. All of these tools are used in the development of new vaccines, and also

X-Ray protective clothing: does DIN 6857-1 allow an objective comparison between lead-free and lead-composite materials?

PubMed

Eder, H; Schlattl, Helmut; Hoeschen, C

2010-05-01

The validity of DIN 6857-1 to establish lead equivalence for protective clothing is evaluated by Monte Carlo simulations and measurements. Commercially available protective clothing made of lead, lead-free and lead-composite materials has been tested regarding its protective efficacy. The analysis has been performed on the one hand in accordance with the test conditions described in the manufacturing standard DIN EN 61331-3 and on the other hand following the new DIN 6857-1 standard. Additionally, measurements have been carried out under simulated patient conditions by using an Alderson-Rando phantom. Following DIN EN 61331-3, the lead-free protective clothing achieved the required protective efficacy only at a restricted tube-voltage range. The test according to DIN 6857-1 showed that the protective criteria were fulfilled only by one lead-composite apron, but not by the three lead-free aprons examined. Thus, in order to guarantee the same protection as lead between 50 and 120 kV, the conditions of DIN 6857-1 must be fulfilled. A modification of DIN EN 61331-3 to account for secondary radiation is strongly advised in the case of lead-free materials. In summary, most of the protective lead-free aprons in use should be used with care, particularly for examinations with a high dose. Georg Thieme Verlag KG Stuttgart * New York.

Multi-optical-axis measurement of freeform progressive addition lenses using a Hartmann-Shack wavefront sensor

NASA Astrophysics Data System (ADS)

Xiang, Huazhong; Guo, Hang; Fu, Dongxiang; Zheng, Gang; Zhuang, Songlin; Chen, JiaBi; Wang, Cheng; Wu, Jie

2018-05-01

To precisely measure the whole-surface characterization of freeform progressive addition lenses (PALs), considering the multi-optical-axis conditions is becoming particularly important. Spherical power and astigmatism (cylinder) measurements for freeform PALs, using a Hartmann-Shack wavefront sensor (HSWFS) are proposed herein. Conversion formulas for the optical performance results were provided as HSWFS Zernike polynomial expansions. For each selected zone, the studied PALs were placed and tilted to simulate the multi-optical-axis conditions. The results of two tested PALs were analyzed using MATLAB programs and represented as contour plots of the spherical equivalent and cylinder of the whole-surface. The proposed experimental setup can provide a high accuracy as well as a possibility of choosing 12 lines and positions of 193 measurement zones on the entire surface. This approach to PAL analysis is potentially an efficient and useful method to objectively evaluate the optical performances, in which the full lens surface is defined and expressed as the contour plots of power in different regions (i.e., the distance region, progressive region, and near region) of the lens for regions of interest.

The usage of phase change materials in fire fighter protective clothing: its effect on thermal protection

NASA Astrophysics Data System (ADS)

Zhao, Mengmeng

2017-12-01

The thermal protective performance of the fire fighter protective clothing is of vital importance for fire fighters. In the study fabrics treated by phase change materials (PCMs) were applied in the multi-layered fabrics of the fire fighter protective clothing ensemble. The PCM fabrics were placed at the different layers of the clothing and their thermal protective performance were measured by a TPP tester. Results show that with the application of the PCM fabrics the thermal protection of the multi-layered fabrics was greatly increased. The time to reach a second degree burn was largely reduced. The location of the PCM fabrics at the different layers did not affect much on the thermal protective performance. The higher amount of the PCM adds on, the higher thermal protection was brought. The fabrics with PCMs of a higher melting temperature could contribute to higher thermal protection.

Monitoring protected areas from space: A multi-temporal assessment using raptors as biodiversity surrogates.

PubMed

Regos, Adrián; Tapia, Luis; Gil-Carrera, Alberto; Domínguez, Jesús

2017-01-01

Monitoring protected areas (PAs) is essential for systematic evaluation of their effectiveness in terms of habitat protection, preservation and representativeness. This study illustrates how the use of species distribution models that combine remote sensing data and information about biodiversity surrogates can contribute to develop a systematic protocol for monitoring PAs. In particular, we assessed the effectiveness of the Natura 2000 (N2000) network, for conserving and preserving the representativeness of seven raptor species in a highly-dynamic landscape in northwest Spain between 2001 and 2014. We also evaluated the cost-effectiveness of the N2000 network by using the total area under protection as a proxy for conservation costs. Overall, the N2000 network was found to poorly represent the habitats of the raptor species. Despite the low representativeness, this network showed a high degree of effectiveness due to increased overall habitat availability for generalist and forest specialist species between 2001 and 2014. Nevertheless, additional protected areas should be established in the near future to increase their representativeness, and thus ensure the protection of open-habitat specialist species and their priority habitats. In addition, proactive conservation measures in natural and semi-natural ecosystems (in particular, montane heathlands) will be essential for long-term protection of Montagu's harrier (species listed in the Annex I of the Bird Directive), and thus complying with the current European Environmental Legislation. This study sheds light on how the development and application of new protected area indices based on the combined use of freely-available satellite data and species distribution models may contribute substantially to the cost-efficiency of the PA monitoring systems, and to the 'Fitness Check' process of EU Nature Directives.

Repeatability of in vitro measurements of the ultraviolet protection factor (UPF) by spectrophotometry with automatic sampling.

PubMed

Hoffmann, K; Kesners, P; Bader, A; Avermaete, A; Altmeyer, P; Gambichler, T

2001-11-01

Spectrophotometric assessment (in vitro) is the most established method for determining the ultraviolet protection factor (UPF) of textiles. Apart from stringent requirements for measurement precision, practical methods are required for the routine determination of the UPF. We report here spectrophotometric measurements of textiles using a newly developed autosampler. Measurement precision was evaluated under repeatable conditions. Fifteen different textiles were spectrophotometrically assessed for the determination of the UPF. Sample handling inside the spectrophotometer was performed with a computer-controlled sampling device, capable of loading and unloading a textile sample from a magazine as well as rotating the sample perpendicular to the spectrometer beam. In order to evaluate the repeatability of measurements, one sample of each textile was assessed eight times under the same conditions in the same laboratory. A mean percentage of the standard error of 1% [E(UPF)] was calculated for the UPF measurements. For UPFs >30, a significantly higher E(UPF) was found (r=0.78; P<0.001). E(UV) (3.9%) of ultraviolet A (UVA) transmission differed significantly from E(UV) (1.1 %) of ultraviolet B (UVB) transmission (P<0.05). Though a slight decrease of repeatability was observed for UVA transmission measurements and UPFs higher than 30, our data indicate a high measurement precision under repeatable conditions. In conclusion, spectrophotometric measurements of textiles with the aid of the autosampler presented have been shown to be highly practical, time saving and precise.

Ion beam sputter-deposited thin film coatings for protection of spacecraft polymers in low Earth orbit

NASA Technical Reports Server (NTRS)

Banks, B. A.; Mirtich, M. J.; Rutledge, S. K.; Swec, D. M.; Nahra, H. K.

1985-01-01

Ion beam sputter-deposited thin films of Al2O3, SiO2, and a codeposited mixture of predominantly SiO2 with small amounts of a fluoropolymer were evaluated both in laboratory plasma ashing tests and in space on board shuttle flight STS-8 for effectiveness in preventing oxidation of polyimide Kapton. Measurements of mass loss and optical performance of coated and uncoated polyimide samples exposed to the low Earth orbital environment are presented. Optical techniques were used to measure loss rates of protective films exposed to atomic oxygen. Results of the analysis of the space flight exposed samples indicate that thin film metal oxide coatings are very effective in protecting the polyimide. Metal oxide coatings with a small amount of fluoropolymer codeposited have the additional benefit of great flexibility.

Ion beam sputter-deposited thin film coatings for protection of spacecraft polymers in low earth orbit

NASA Technical Reports Server (NTRS)

Banks, B. A.; Mirtich, M. J.; Rutledge, S. K.; Swec, D. M.; Nahra, H. K.

1985-01-01

Ion beam sputter-deposited thin films at Al2O3, SiO2, and a codeposited mixture of predominantly SiO2 with small amounts of fluoropolymer were evaluated both in laboratory plasma ashing tests and in space on board Shuttle flight STS-8 for effectiveness in preventing oxidation of polyimide Kapton. Measurements of mass loss and optical performance of coated and uncoated polyimide samples exposed to the low earth orbital environment are presented. Optical techniques were used to measure loss rates of protective films exposed to atomic oxygen. Results of the analysis of the space flight exposed samples indicate that thin film metal oxide coatings are very effective in protecting the polyimide. Metal oxide coatings with a small amount of fluoropolymer codeposited have the additional benefit of great flexibility.

Protecting patients, protecting healthcare workers: a review of the role of influenza vaccination

PubMed Central

Music, T

2012-01-01

MUSIC T. (2012) A review of the role the role of influenza vaccination in protecting patients, protecting healthcare workers the role of influenza vaccination. International Nursing Review59, 161–167 Aim: Many health authorities recommend routine influenza vaccination for healthcare workers (HCWs), and during the 2009 A (H1N1) pandemic, the World Health Organization (WHO) recommended immunization of all HCWs worldwide. As this remains an important area of policy debate, this paper examines the case for vaccination, the role of local guidelines, barriers to immunization and initiatives to increase uptake. Background: Seasonal influenza is a major threat to public health, causing up to 1 million deaths annually. Extensive evidence supports the vaccination of priority groups, including HCWs. Immunization protects HCWs themselves, and their vulnerable patients from nosocomial influenza infections. In addition, influenza can disrupt health services and impact healthcare organizations financially. Immunization can reduce staff absences, offer cost savings and provide economic benefits. Methods: This paper reviews official immunization recommendations and HCW vaccination studies, including a recent International Federation of Pharmaceutical Manufacturers and Associations (IFPMA) survey of 26 countries from each region of the world. Results: HCW immunization is widely recommended and supported by the WHO. In the IFPMA study, 88% of countries recommended HCW vaccination, and 61% supported this financially (with no correlation to country development status). Overall, coverage can be improved, and research shows that uptake may be impacted by lack of conveniently available vaccines and misconceptions regarding vaccine safety/efficacy and influenza risk. Conclusions: Many countries recommend HCW vaccination against influenza. In recent years, there has been an increased uptake rate among HCWs in some countries, but not in others. Several initiatives can increase coverage

Measuring the difference made by conservation initiatives: protected areas and their environmental and social impacts.

PubMed

Ferraro, Paul J; Pressey, Robert L

2015-11-05

Success in conservation depends on our ability to reduce human pressures in areas that harbour biological diversity and ecosystem services. Legally protecting some of these areas through the creation of protected areas is a key component of conservation efforts globally. To develop effective protected area networks, practitioners need credible, scientific evidence about the degree to which protected areas affect environmental and social outcomes, and how these effects vary with context. Such evidence has been lacking, but the situation is changing as conservation scientists adopt more sophisticated research designs for evaluating protected areas' past impacts and for predicting their future impacts. Complementing these scientific advances, conservation funders and practitioners are paying increasing attention to evaluating their investments with more scientifically rigorous evaluation designs. This theme issue highlights recent advances in the science of protected area evaluations and explores the challenges to developing a more credible evidence base that can help societies achieve their goals of protecting nature while enhancing human welfare. © 2015 The Author(s).

Measuring the difference made by conservation initiatives: protected areas and their environmental and social impacts

PubMed Central

Ferraro, Paul J.; Pressey, Robert L.

2015-01-01

Success in conservation depends on our ability to reduce human pressures in areas that harbour biological diversity and ecosystem services. Legally protecting some of these areas through the creation of protected areas is a key component of conservation efforts globally. To develop effective protected area networks, practitioners need credible, scientific evidence about the degree to which protected areas affect environmental and social outcomes, and how these effects vary with context. Such evidence has been lacking, but the situation is changing as conservation scientists adopt more sophisticated research designs for evaluating protected areas' past impacts and for predicting their future impacts. Complementing these scientific advances, conservation funders and practitioners are paying increasing attention to evaluating their investments with more scientifically rigorous evaluation designs. This theme issue highlights recent advances in the science of protected area evaluations and explores the challenges to developing a more credible evidence base that can help societies achieve their goals of protecting nature while enhancing human welfare. PMID:26460123

A shielded measurement system for irradiated nuclear fuel measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mosby, W.R.; Aumeier, S.E.; Klann, R.T.

1999-07-01

The US Department of Energy (DOE) is driving a transition toward dry storage of irradiated nuclear fuel (INF), toward characterization of INF for final disposition, and toward resumption of measurement-based material control and accountability (MC and A) efforts for INF. For these reasons, the ability to efficiently acquire radiological measurements of INF in a dry environment is important. The DOE has recently developed a guidance document proposing MC and A requirements for INF. The intent of this document is to encourage the direct measurement of INF on inventory within DOE. The guidance document reinforces and clarifies existing material safeguards requirementsmore » as they pertain to INF. Validation of nuclear material contents of non-self-protecting INF must be accomplished by direct measurement, application of validated burnup codes using qualified initial fissile content, burnup data, and age or by other valid means. The fuel units must remain intact with readable identification numbers. INF may be subject to periodic inventories with visual item accountability checks. Quantitative measurements may provide greater assurance of the integrity of INF inventories at a lower cost and with less personnel exposure than visual item accountability checks. Currently, several different approaches are used to measure the radiological attributes of INF. Although these systems are useful for a wide variety of applications, there is currently no relatively inexpensive measurement system that is readily deployable for INF measurements for materials located in dry storage. The authors present the conceptual design of a shielded measurement system (SMS) that could be used for this purpose. The SMS consists of a shielded enclosure designed to house a collection of measurement systems to allow measurements on spent fuel outside of a hot cell. The phase 1 SMS will contain {sup 3}He detectors and ionization chambers to allow for gross neutron and gamma-ray measurements. The

78 FR 53733 - Procurement List Additions and Deletions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-30

... INFORMATION CONTACT: Barry S. Lineback, Telephone: (703) 603-7740, Fax: (703) 603-0655, or email [email protected] . SUPPLEMENTARY INFORMATION: Additions On 7/8/2013 (78 FR 40727-40728) and 7/12/2013 (78 FR... military commissaries and exchanges as aggregated by the Defense Commissary Agency. Towel, Hazardous...

Risk and protective factors for recidivism among juveniles who have offended sexually.

PubMed

Spice, Andrew; Viljoen, Jodi L; Latzman, Natasha E; Scalora, Mario J; Ullman, Daniel

2013-08-01

Literature on risk factors for recidivism among juveniles who have sexually offended (JSOs) is limited. In addition, there have been no studies published concerning protective factors among this population. The purpose of this study was to examine the relationship of risk and protective factors to sexual and nonsexual recidivism among a sample of 193 male JSOs (mean age = 15.26). Youths were followed for an average of 7.24 years following discharge from a residential sex offender treatment program. The risk factor opportunities to reoffend, as coded based on the Estimate of Risk of Adolescent Sexual Offense Recidivism, was associated with sexual recidivism. Several risk factors (e.g., prior offending; peer delinquency) were associated with nonsexual recidivism. No protective factors examined were associated with sexual recidivism, although strong attachments and bonds as measured by the Structured Assessment of Violence Risk in Youth was negatively related to nonsexual recidivism. These findings indicate that risk factors for nonsexual recidivism may be consistent across both general adolescent offender populations and JSOs, but that there may be distinct protective factors that apply to sexual recidivism among JSOs. Results also indicate important needs for further research on risk factors, protective factors, and risk management strategies for JSOs.