77 FR 70473 - Child Labor, Forced Labor, and Forced or Indentured Child Labor in the Production of Goods in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-26

... Production of Goods in Foreign Countries and Efforts by Certain Countries To Eliminate the Worst Forms of...'s individual advancement toward eliminating the worst forms of child labor during the current... beneficiary country's implementation of its international commitments to eliminate the worst forms of child...

Across species-pool aggregation alters grassland productivity and diversity.

PubMed

McKenna, Thomas P; Yurkonis, Kathryn A

2016-08-01

Plant performance is determined by the balance of intra- and interspecific neighbors within an individual's zone of influence. If individuals interact over smaller scales than the scales at which communities are measured, then altering neighborhood interactions may fundamentally affect community responses. These interactions can be altered by changing the number (species richness), abundances (species evenness), and positions (species pattern) of the resident plant species, and we aimed to test whether aggregating species at planting would alter effects of species richness and evenness on biomass production at a common scale of observation in grasslands. We varied plant species richness (2, 4, or 8 species and monocultures), evenness (0.64, 0.8, or 1.0), and pattern (planted randomly or aggregated in groups of four individuals) within 1 × 1 m plots established with transplants from a pool of 16 tallgrass prairie species and assessed plot-scale biomass production and diversity over the first three growing seasons. As expected, more species-rich plots produced more biomass by the end of the third growing season, an effect associated with a shift from selection to complementarity effects over time. Aggregating conspecifics at a 0.25-m scale marginally reduced biomass production across all treatments and increased diversity in the most even plots, but did not alter biodiversity effects or richness-productivity relationships. Results support the hypothesis that fine-scale species aggregation affects diversity by promoting species coexistence in this system. However, results indicate that inherent changes in species neighborhood relationships along grassland diversity gradients may only minimally affect community (meter) - scale responses among similarly designed biodiversity-ecosystem function studies. Given that species varied in their responses to local aggregation, it may be possible to use such species-specific results to spatially design larger-scale grassland

How important are dual economy effects for aggregate productivity?

PubMed Central

Vollrath, Dietrich

2013-01-01

This paper brings together development accounting techniques and the dual economy model to address the role that factor markets have in creating variation in aggregate total factor productivity (TFP). Development accounting research has shown that much of the variation in income across countries can be attributed to differences in TFP. The dual economy model suggests that aggregate productivity is depressed by having too many factors allocated to low productivity work in agriculture. Data show large differences in marginal products of similar factors within many developing countries, offering prima facie evidence of this misallocation. Using a simple two-sector decomposition of the economy, this article estimates the role of these misallocations in accounting for the cross-country income distribution. A key contribution is the ability to bring sector-specific data on human and physical capital stocks to the analysis. Variation across countries in the degree of misallocation is shown to account for 30–40% of the variation in income per capita, and up to 80% of the variation in aggregate TFP. PMID:23946553

Ceramic ware waste as coarse aggregate for structural concrete production.

PubMed

García-González, Julia; Rodríguez-Robles, Desirée; Juan-Valdés, Andrés; Morán-Del Pozo, Julia M; Guerra-Romero, M Ignacio

2015-01-01

The manufacture of any kind of product inevitably entails the production of waste. The quantity of waste generated by the ceramic industry, a very important sector in Spain, is between 5% and 8% of the final output and it is therefore necessary to find an effective waste recovery method. The aim of the study reported in the present article was to seek a sustainable means of managing waste from the ceramic industry through the incorporation of this type of waste in the total replacement of conventional aggregate (gravel) used in structural concrete. Having verified that the recycled ceramic aggregates met all the technical requirements imposed by current Spanish legislation, established in the Code on Structural Concrete (EHE-08), then it is prepared a control concrete mix and the recycled concrete mix using 100% recycled ceramic aggregate instead of coarse natural aggregate. The concretes obtained were subjected to the appropriate tests in order to conduct a comparison of their mechanical properties. The results show that the concretes made using ceramic sanitary ware aggregate possessed the same mechanical properties as those made with conventional aggregate. It is therefore possible to conclude that the reuse of recycled ceramic aggregate to produce recycled concrete is a feasible alternative for the sustainable management of this waste.

Sustainability in Supply Chain Management: Aggregate Planning from Sustainability Perspective.

PubMed

Türkay, Metin; Saraçoğlu, Öztürk; Arslan, Mehmet Can

2016-01-01

Supply chain management that considers the flow of raw materials, products and information has become a focal issue in modern manufacturing and service systems. Supply chain management requires effective use of assets and information that has far reaching implications beyond satisfaction of customer demand, flow of goods, services or capital. Aggregate planning, a fundamental decision model in supply chain management, refers to the determination of production, inventory, capacity and labor usage levels in the medium term. Traditionally standard mathematical programming formulation is used to devise the aggregate plan so as to minimize the total cost of operations. However, this formulation is purely an economic model that does not include sustainability considerations. In this study, we revise the standard aggregate planning formulation to account for additional environmental and social criteria to incorporate triple bottom line consideration of sustainability. We show how these additional criteria can be appended to traditional cost accounting in order to address sustainability in aggregate planning. We analyze the revised models and interpret the results on a case study from real life that would be insightful for decision makers.

Sustainability in Supply Chain Management: Aggregate Planning from Sustainability Perspective

PubMed Central

Türkay, Metin; Saraçoğlu, Öztürk; Arslan, Mehmet Can

2016-01-01

Supply chain management that considers the flow of raw materials, products and information has become a focal issue in modern manufacturing and service systems. Supply chain management requires effective use of assets and information that has far reaching implications beyond satisfaction of customer demand, flow of goods, services or capital. Aggregate planning, a fundamental decision model in supply chain management, refers to the determination of production, inventory, capacity and labor usage levels in the medium term. Traditionally standard mathematical programming formulation is used to devise the aggregate plan so as to minimize the total cost of operations. However, this formulation is purely an economic model that does not include sustainability considerations. In this study, we revise the standard aggregate planning formulation to account for additional environmental and social criteria to incorporate triple bottom line consideration of sustainability. We show how these additional criteria can be appended to traditional cost accounting in order to address sustainability in aggregate planning. We analyze the revised models and interpret the results on a case study from real life that would be insightful for decision makers. PMID:26807848

The labor force of the future.

PubMed

Norwood, J L

1987-07-01

In the decades ahead, the US labor force will reflect changes in the industrial structure, with declines in some manufacturing industries and expansion in service industries. The services sector is so diverse that the jobs within it cannot be categorized as either high wage or low wage. The service-producing sector employs 85% of professional specialty workers in the US. In general, information on compensation trends indicates that greater increases in compensation have occurred for workers in service-producing as opposed to goods-producing industries. The increase in service sector jobs has created opportunities for women to enter the labor force and, at present, 5 out of 6 women work in this sector compared to fewer than 2 out of 3 men. Productivity growth rates in the service-producing industries vary substantially and are strongly affected by the business cycle. Central to employment opportunities in the years ahead will be the effect of new technology. To date, the aggregate effect of new technology has been increased employment and higher living standards. Although retraining programs should be in place, the scenario of a huge technology-created labor surplus seems unlikely. In fact, a more likely problem is a shortage of labor resulting from earlier labor force withdrawal and demographic aging of the population. Those in the 25-54-year age group will represent a larger share of the labor force in the years ahead. In addition, blacks are expected to account for 20% of the labor force growth in the next decade. Finally, given increasing labor force participation rates among mothers, employers may have to provide more flexible work schedules, assistance with day care, and more attractive benefits packages.

77 FR 9267 - Child Labor, Forced Labor, and Forced or Indentured Child Labor in the Production of Goods in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... DEPARTMENT OF LABOR Child Labor, Forced Labor, and Forced or Indentured Child Labor in the... Child Labor AGENCY: The Bureau of International Labor Affairs, United States Department of Labor. ACTION..., 2011, regarding child labor and forced labor in foreign countries. Relevant information will be used by...

78 FR 72714 - Child Labor, Forced Labor, and Forced or Indentured Child Labor in the Production of Goods in...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... DEPARTMENT OF LABOR Child Labor, Forced Labor, and Forced or Indentured Child Labor in the... Child Labor AGENCY: The Bureau of International Labor Affairs, United States Department of Labor. ACTION..., 2013, regarding child labor and forced labor in foreign countries. Relevant information will be used by...

Valorization of lignite combustion residues and ferroalumina in the production of aggregates.

PubMed

Anagnostopoulos, I M; Stivanakis, V E; Angelopoulos, G N; Papamantellos, D C

2010-02-15

The present research study investigates the synergy of industrial solid by-products from lignite combustion (fly ash and bottom ash) and aluminum production (ferroalumina) in the production of lightweight aggregates (LWA). The process consists of two stages, pelletization and sintering. Bottom ash (BA) is used as the principal raw material in mixtures while ferroalumina (FAL) is added in lower percentages (5-30 wt%). BA carbon content is used as the fuel of sintering process in high temperatures, around 1250 degrees C, and gas generation is responsible for porous structure formation. Physical properties such as porosity, water absorption and bulk density, of sintering products are measured. Increase of FAL percentage in sintering mixtures results in decrease of porosity from 61% to 35% and of water absorption from 61% to 21% and in increase of bulk density from 1.02 g/cm(3) to 1.80 g/cm(3) of the produced aggregates. Aggregates produced by FAL addition up to 20 wt% are characterized as LWA. Aggregates formed are used in the production of concrete specimens. Compressive strength of concrete increases by increasing FAL addition in aggregates from 5 wt% to 15 wt% (highest strength value), while decrease by increasing FAL addition from 20 wt% to 30 wt%. FAL addition in lignite ashes sintering mixtures (up to 15 wt%) is considered as an important parameter for enhancing aggregates strength.

Energy conservation and the demand for labor: evidence from aggregate data. Final report Oct 80-May 81

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morgenstern, R.; Vroman, W.

1981-05-01

The objective of this study was to explore the relationship between aggregate employment and output, with special reference to the 1979-1980 experience. An indirect relationship was posited between energy price shocks and the occupational mix. Specifically, it was hypothesized that the energy price shocks of 1978-1979 (and possibly 1973-1974) may have created new investment opportunities for simple, short term energy conservation type investments which may, in turn, have increased the demand for blue collar labor. A framework for viewing the problem is described and the basic hypothesis tested by estimating a time series model of occupational/industrial employment patterns. Included inmore » the model is a set of variables designed to measure the energy price shocks.« less

Soil Aggregate Stability and Grassland Productivity Associations in a Northern Mixed-Grass Prairie

PubMed Central

Reinhart, Kurt O.; Vermeire, Lance T.

2016-01-01

Soil aggregate stability data are often predicted to be positively associated with measures of plant productivity, rangeland health, and ecosystem functioning. Here we revisit the hypothesis that soil aggregate stability is positively associated with plant productivity. We measured local (plot-to-plot) variation in grassland community composition, plant (aboveground) biomass, root biomass, % water-stable soil aggregates, and topography. After accounting for spatial autocorrelation, we observed a negative association between % water-stable soil aggregates (0.25–1 and 1–2 mm size classes of macroaggregates) and dominant graminoid biomass, and negative associations between the % water-stable aggregates and the root biomass of a dominant sedge (Carex filifolia). However, variation in total root biomass (0–10 or 0–30 cm depths) was either negatively or not appreciably associated with soil aggregate stabilities. Overall, regression slope coefficients were consistently negative thereby indicating the general absence of a positive association between measures of plant productivity and soil aggregate stability for the study area. The predicted positive association between factors was likely confounded by variation in plant species composition. Specifically, sampling spanned a local gradient in plant community composition which was likely driven by niche partitioning along a subtle gradient in elevation. Our results suggest an apparent trade-off between some measures of plant biomass production and soil aggregate stability, both known to affect the land’s capacity to resist erosion. These findings further highlight the uncertainty of plant biomass-soil stability associations. PMID:27467598

Soil Aggregate Stability and Grassland Productivity Associations in a Northern Mixed-Grass Prairie.

PubMed

Reinhart, Kurt O; Vermeire, Lance T

2016-01-01

Soil aggregate stability data are often predicted to be positively associated with measures of plant productivity, rangeland health, and ecosystem functioning. Here we revisit the hypothesis that soil aggregate stability is positively associated with plant productivity. We measured local (plot-to-plot) variation in grassland community composition, plant (aboveground) biomass, root biomass, % water-stable soil aggregates, and topography. After accounting for spatial autocorrelation, we observed a negative association between % water-stable soil aggregates (0.25-1 and 1-2 mm size classes of macroaggregates) and dominant graminoid biomass, and negative associations between the % water-stable aggregates and the root biomass of a dominant sedge (Carex filifolia). However, variation in total root biomass (0-10 or 0-30 cm depths) was either negatively or not appreciably associated with soil aggregate stabilities. Overall, regression slope coefficients were consistently negative thereby indicating the general absence of a positive association between measures of plant productivity and soil aggregate stability for the study area. The predicted positive association between factors was likely confounded by variation in plant species composition. Specifically, sampling spanned a local gradient in plant community composition which was likely driven by niche partitioning along a subtle gradient in elevation. Our results suggest an apparent trade-off between some measures of plant biomass production and soil aggregate stability, both known to affect the land's capacity to resist erosion. These findings further highlight the uncertainty of plant biomass-soil stability associations.

COIN Project: Towards a zero-waste technology for concrete aggregate production in Norway

NASA Astrophysics Data System (ADS)

Cepuritis, Rolands; Willy Danielsen, Svein

2014-05-01

COIN Project: Towards a zero-waste technology for concrete aggregate production in Norway Rolands Cepuritis, Norcem/NTNU and Svein Willy Danielsen, SINTEF Aggregate production is a mining operation where no purification of the "ore" is necessary. Still it is extremely rare that an aggregate production plant is operating on the basis of zero-waste concept. This is since historically the fine crushed aggregate (particles with a size of less than 2, 4 or sometimes 8 mm) has been regarded as a by-product or waste of the more valuable coarse aggregate production. The reason is that the crushed coarse aggregates can easily replace coarse rounded natural stones in almost any concrete composition; while, the situation with the sand is different. The production of coarse aggregate normally yields fine fractions with rough surface texture, flaky or elongated particles an inadequate gradation. When such a material replaces smooth and rounded natural sand grains in a concrete mix, the result is usually poor and much more water and cement has to be used to achieve adequate concrete flow. The consequences are huge stockpiles of the crushed fine fractions that can't be sold (mass balance problems) for the aggregate producers, sustainability problems for the whole industry and environmental issues for society due to dumping and storing of the fine co-generated material. There have been attempts of utilising the material in concrete before; however, they have mostly ended up in failure. There have been attempts to adjust the crushed sand to the properties of the natural sand, which would still give a lot of waste, especially if the grading would have to be adjusted and the high amounts of fines abundantly present in the crushed sand would have to be removed. Another fundamental reason for failure has been that historically such attempts have mainly ended up in a research carried out by people (both industrial and academic) with aggregate background (= parties willing to find market

An Analysis of the Impact of Heat Waves in Labor and Crop Productivity in the Agricultural Sector in California

NASA Astrophysics Data System (ADS)

Castillo, F.; Wehner, M. F.; Gilless, J. K.

2017-12-01

California agriculture is an important economic activity for the state. California leads the nation in farms sales since 1950. In addition, agricultural employment in California reached approximately 410,000. Production of many fruits and vegetables is labor intensive and labor costs represent anywhere from 20% to 40% of total production costs. In additon, agricutlural production growth has been the highest for labor intensive crops such as berries (all types) and nuts. Given the importance of the agricultural sector and the labor component whithin it, the analysis of the impact of climate change on the agricultural sector of California becomes imperative. Heat waves are a weather related extreme that impact labor productivity, specially outdoor labor producitivity. We use crop production function analysis that incorporates socio economic variables such as crop prices, total acreage, production levels and harvest timiline with climate related variables such as an estimated Heat Index (HI) to analize the impact of heat waves on crop production via an impact on labor productivity for selected crops in the Central and Imperial Valleys in California. The analysis finds that the impact of heat waves varies by the degree of labor intensity of the crop and the relative intensity of the heat wave.

Effect of cocoa products and flavanols on platelet aggregation in humans: a systematic review.

PubMed

Peluso, Ilaria; Palmery, Maura; Serafini, Mauro

2015-07-01

Previous evidence suggested an active role of cocoa products and flavanols in modulating platelet aggregation. However, cocoa flavanols are characterized by a low bioavailability that can deeply affect their presence in biological fluids and raise questions on their biological effect in humans. We performed a systematic search on Medline, Embase, Cochrane and ProQuest databases, until April 2015, on the effect of cocoa products on platelet aggregation in human intervention studies. We identified 13 interventions, of which only five involved repeated administration. Different effects were observed on the basis of the platelet aggregation test used, whereas neither a longer duration of treatment nor a higher dose was associated with a higher inhibition of platelet aggregation. In conclusion, the reviewed results suggest that consumption of cocoa products in bolus administration positively affects platelet aggregation in both healthy subjects and diseased patients. On the other hand, more evidence is required in order to assess the effect of long-term cocoa product ingestion and to identify the bioactive components involved.

Urban scaling and the production function for cities.

PubMed

Lobo, José; Bettencourt, Luís M A; Strumsky, Deborah; West, Geoffrey B

2013-01-01

The factors that account for the differences in the economic productivity of urban areas have remained difficult to measure and identify unambiguously. Here we show that a microscopic derivation of urban scaling relations for economic quantities vs. population, obtained from the consideration of social and infrastructural properties common to all cities, implies an effective model of economic output in the form of a Cobb-Douglas type production function. As a result we derive a new expression for the Total Factor Productivity (TFP) of urban areas, which is the standard measure of economic productivity per unit of aggregate production factors (labor and capital). Using these results we empirically demonstrate that there is a systematic dependence of urban productivity on city population size, resulting from the mismatch between the size dependence of wages and labor, so that in contemporary US cities productivity increases by about 11% with each doubling of their population. Moreover, deviations from the average scale dependence of economic output, capturing the effect of local factors, including history and other local contingencies, also manifest surprising regularities. Although, productivity is maximized by the combination of high wages and low labor input, high productivity cities show invariably high wages and high levels of employment relative to their size expectation. Conversely, low productivity cities show both low wages and employment. These results shed new light on the microscopic processes that underlie urban economic productivity, explain the emergence of effective aggregate urban economic output models in terms of labor and capital inputs and may inform the development of economic theory related to growth.

Urban Scaling and the Production Function for Cities

PubMed Central

Lobo, José; Bettencourt, Luís M. A.; Strumsky, Deborah; West, Geoffrey B.

2013-01-01

The factors that account for the differences in the economic productivity of urban areas have remained difficult to measure and identify unambiguously. Here we show that a microscopic derivation of urban scaling relations for economic quantities vs. population, obtained from the consideration of social and infrastructural properties common to all cities, implies an effective model of economic output in the form of a Cobb-Douglas type production function. As a result we derive a new expression for the Total Factor Productivity (TFP) of urban areas, which is the standard measure of economic productivity per unit of aggregate production factors (labor and capital). Using these results we empirically demonstrate that there is a systematic dependence of urban productivity on city population size, resulting from the mismatch between the size dependence of wages and labor, so that in contemporary US cities productivity increases by about 11% with each doubling of their population. Moreover, deviations from the average scale dependence of economic output, capturing the effect of local factors, including history and other local contingencies, also manifest surprising regularities. Although, productivity is maximized by the combination of high wages and low labor input, high productivity cities show invariably high wages and high levels of employment relative to their size expectation. Conversely, low productivity cities show both low wages and employment. These results shed new light on the microscopic processes that underlie urban economic productivity, explain the emergence of effective aggregate urban economic output models in terms of labor and capital inputs and may inform the development of economic theory related to growth. PMID:23544042

9 CFR 381.203 - Products offered for entry; charges for storage, cartage, and labor with respect to products...

Code of Federal Regulations, 2010 CFR

2010-01-01

... CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Imported Poultry Products § 381.203 Products offered for... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Products offered for entry; charges for storage, cartage, and labor with respect to products which are refused entry. 381.203 Section 381...

Separating full-length protein from aggregating proteolytic products using filter flow-through purification.

PubMed

Churion, Kelly A; Rogers, Robert E; Bayless, Kayla J; Bondos, Sarah E

2016-12-01

Separation of full-length protein from proteolytic products is challenging, since the properties used to isolate the protein can also be present in proteolytic products. Many separation techniques risk non-specific protein adhesion and/or require a lot of time, enabling continued proteolysis and aggregation after lysis. We demonstrate that proteolytic products aggregate for two different proteins. As a result, full-length protein can be rapidly separated from these fragments by filter flow-through purification, resulting in a substantial protein purity enhancement. This rapid approach is likely to be useful for intrinsically disordered proteins, whose repetitive sequence composition and flexible nature can facilitate aggregation. Copyright © 2016 Elsevier Inc. All rights reserved.

[Productive restructuring and its impact on labor relations in the public health services in Brazil].

PubMed

Martins, Maria Inês Carsalade; Molinaro, Alex

2013-06-01

The restructuring of productive systems and economic globalization are directly impacting the basic social rights of workers. In the semi-peripheral countries such as Brazil, where the wage-based society and the consolidation of social rights are not completely implemented, this process of change in the world of labor contributes to aggravate the inequality in the capital-labor relationship and hampers access to employment. By means of a critical review of the scientific literature regarding changes in the world of labor and its impact on the organization and production of health services in Brazil, this article pinpoints the weakness of regulation of the labor market in Brazil, especially in the health sector. It also stresses the need to increase the debate on new forms of institutionalization of the labor relationship in order to ensure equity in the workplace and protect the rights to work and in the workplace.

An analysis of labor and multifactor productivity in air transportation : 1990 - 2001

DOT National Transportation Integrated Search

2002-01-01

The analysis has two main objectives: 1) to examine : labor productivity and multifactor productivity : (MFP) in U.S. air transportation during the 1990 : to 2001 period and to compare these measures to : those of two other transportation subsectors ...

Analysis of the labor productivity of enterprises via quantile regression

NASA Astrophysics Data System (ADS)

Türkan, Semra

2017-07-01

In this study, we have analyzed the factors that affect the performance of Turkey's Top 500 Industrial Enterprises using quantile regression. The variable about labor productivity of enterprises is considered as dependent variable, the variableabout assets is considered as independent variable. The distribution of labor productivity of enterprises is right-skewed. If the dependent distribution is skewed, linear regression could not catch important aspects of the relationships between the dependent variable and its predictors due to modeling only the conditional mean. Hence, the quantile regression, which allows modelingany quantilesof the dependent distribution, including the median,appears to be useful. It examines whether relationships between dependent and independent variables are different for low, medium, and high percentiles. As a result of analyzing data, the effect of total assets is relatively constant over the entire distribution, except the upper tail. It hasa moderately stronger effect in the upper tail.

Intracellular response to process optimization and impact on productivity and product aggregates for a high-titer CHO cell process.

PubMed

Handlogten, Michael W; Lee-O'Brien, Allison; Roy, Gargi; Levitskaya, Sophia V; Venkat, Raghavan; Singh, Shailendra; Ahuja, Sanjeev

2018-01-01

A key goal in process development for antibodies is to increase productivity while maintaining or improving product quality. During process development of an antibody, titers were increased from 4 to 10 g/L while simultaneously decreasing aggregates. Process development involved optimization of media and feed formulations, feed strategy, and process parameters including pH and temperature. To better understand how CHO cells respond to process changes, the changes were implemented in a stepwise manner. The first change was an optimization of the feed formulation, the second was an optimization of the medium, and the third was an optimization of process parameters. Multiple process outputs were evaluated including cell growth, osmolality, lactate production, ammonium concentration, antibody production, and aggregate levels. Additionally, detailed assessment of oxygen uptake, nutrient and amino acid consumption, extracellular and intracellular redox environment, oxidative stress, activation of the unfolded protein response (UPR) pathway, protein disulfide isomerase (PDI) expression, and heavy and light chain mRNA expression provided an in-depth understanding of the cellular response to process changes. The results demonstrate that mRNA expression and UPR activation were unaffected by process changes, and that increased PDI expression and optimized nutrient supplementation are required for higher productivity processes. Furthermore, our findings demonstrate the role of extra- and intracellular redox environment on productivity and antibody aggregation. Processes using the optimized medium, with increased concentrations of redox modifying agents, had the highest overall specific productivity, reduced aggregate levels, and helped cells better withstand the high levels of oxidative stress associated with increased productivity. Specific productivities of different processes positively correlated to average intracellular values of total glutathione. Additionally

Trends in hospital labor and total factor productivity, 1981-86

PubMed Central

Cromwell, Jerry; Pope, Gregory C.

1989-01-01

The per-case payment rates of Medicare's prospective payment system are annually updated. As one element of the update factor, Congress required consideration of changes in hospital productivity. In this article, calculations of annual changes in labor and total factor productivity during 1981-86 of hospitals eligible for prospective payment are presented using several output and input variants. Generally, productivity has declined since 1980, although the rates of decline have slowed since prospective payment implementation. According to the series of analyses most relevant for policy, significant hospital productivity gains occurred during 1983-86. This may justify a lower update factor. PMID:10313278

76 FR 78044 - Controlled Substances: Established Aggregate Production Quotas for 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-15

... that the 2012 aggregate production quotas for the following controlled substances, expressed in grams... Methamphetamine 3,130,000 g [750,000 grams of levo-desoxyephedrine for use in a non-controlled, non- prescription product; 2,331,000 grams for methamphetamine mostly for conversion to a Schedule III product; and 49,000...

Locally available aggregate and sediment production

Treesearch

Randy B. Foltz; Mark Truebe

2003-01-01

Selection of suitable locally available materials to build strong and durable roads with aggregate surfaces is desired to minimize road construction and maintenance costs and to minimize the detrimental effects of sedimentation. Eighteen aggregates were selected from local sources in Idaho, Oregon, South Dakota, and Washington State. Aggregate was placed in shallow...

Validation of an aggregate exposure model for substances in consumer products: a case study of diethyl phthalate in personal care products

PubMed Central

Delmaar, Christiaan; Bokkers, Bas; ter Burg, Wouter; Schuur, Gerlienke

2015-01-01

As personal care products (PCPs) are used in close contact with a person, they are a major source of consumer exposure to chemical substances contained in these products. The estimation of realistic consumer exposure to substances in PCPs is currently hampered by the lack of appropriate data and methods. To estimate aggregate exposure of consumers to substances contained in PCPs, a person-oriented consumer exposure model has been developed (the Probabilistic Aggregate Consumer Exposure Model, PACEM). The model simulates daily exposure in a population based on product use data collected from a survey among the Dutch population. The model is validated by comparing diethyl phthalate (DEP) dose estimates to dose estimates based on biomonitoring data. It was found that the model's estimates compared well with the estimates based on biomonitoring data. This suggests that the person-oriented PACEM model is a practical tool for assessing realistic aggregate exposures to substances in PCPs. In the future, PACEM will be extended with use pattern data on other product groups. This will allow for assessing aggregate exposure to substances in consumer products across different product groups. PMID:25352161

Just-in-Space: Certified Rural Products, Labor of Quality, and Regulatory Spaces

ERIC Educational Resources Information Center

Mutersbaugh, Tad

2005-01-01

Since the mid-1990s, the number and diversity of "quality-certified" products has increased dramatically. This article examines labor practices and regulatory spaces within 3rd party quality certification and suggests that this distinct configuration be termed "just-in-space" production. A privileging of space derives, on the one hand, from the…

Female Labor Supply in Japan: Implications of the Informal Sector for Labor Force Participation and Hours of Work.

ERIC Educational Resources Information Center

Hill, M. Anne

1989-01-01

Looks at the simultaneous labor force participation and hours of work decisions for Japanese wives, both employees and family workers. Although the estimated aggregate wage and income fluctuations for employees are somewhat higher than previous estimates for the United States, they are of the same order of magnitude. (JOW)

Drug Use, the Labor Market and Class Conflict. Special Studies 2.

ERIC Educational Resources Information Center

Helmer, John; Vietorisz, Thomas

To date there has been little study of the responsiveness of narcotics use to changes in the labor market, either in the aggregate or in the motivations of individual users. It is the authors' hypothesis that narcotics use is one of several interrelated social responses to labor market failure. What exactly has constituted this "failure" has…

Method for the production of cementitious compositions and aggregate derivatives from said compositions

DOEpatents

Minnick, L. John

1981-01-01

Method for the production of cementitious compositions and aggregate derivatives of said compositions, and cementitious compositions and aggregates produced by said method, wherein fluidized bed combustion residue and pozzolanic material, such as pulverized coal combustion system fly ash, are incorporated in a cementitious mix. The mix is cast into desired shape and cured. If desired, the shape may then be crushed so as to result in a fluidized bed combustion residue-fly ash aggregate material or the shape may be used by itself.

Labor market productivity costs for caregivers of children with spina bifida: a population-based analysis.

PubMed

Tilford, John M; Grosse, Scott D; Goodman, Allen C; Li, Kemeng

2009-01-01

Caregiver productivity costs are an important component of the overall cost of care for individuals with birth defects and developmental disabilities, yet few studies provide estimates for use in economic evaluations. This study estimates labor market productivity costs for caregivers of children and adolescents with spina bifida. Case families were recruited from a state birth defects registry in Arkansas. Primary caregivers of children with spina bifida (N = 98) reported their employment status in the past year and demographic characteristics. Controls were abstracted from the Current Population Survey covering the state of Arkansas for the same time period (N = 416). Estimates from regression analyses of labor market outcomes were used to calculate differences in hours worked per week and lifetime costs. Caregivers of children with spina bifida worked an annual average of 7.5 to 11.3 hours less per week depending on the disability severity. Differences in work hours by caregivers of children with spina bifida translated into lifetime costs of $133,755 in 2002 dollars using a 3% discount rate and an age- and sex-adjusted earnings profile. Including caregivers' labor market productivity costs in prevention effectiveness estimates raises the net cost savings per averted case of spina bifida by 48% over the medical care costs alone. Information on labor market productivity costs for caregivers can be used to better inform economic evaluations of prevention and treatment strategies for spina bifida. Cost-effectiveness calculations that omit caregiver productivity costs substantially overstate the net costs of the intervention and underestimate societal value.

Height and Cognition at Work: Labor market productivity in a low income setting

PubMed Central

LaFave, Daniel; Thomas, Duncan

2016-01-01

Taller workers earn more, particularly in lower income settings. It has been argued that adult height is a marker of strength which is rewarded in the labor market; a proxy for cognitive performance or other dimensions of human capital such as school quality; a proxy for health status; and a proxy for family background and genetic characteristics. As a result, the argument goes, height is rewarded in the labor market because it is an informative signal of worker quality to an employer. It has also been argued that the height premium is driven by occupational and sectoral choice. This paper evaluates the relative importance of these potential mechanisms underlying the link between adult stature and labor market productivity in a specific low income setting, rural Central Java, Indonesia. Drawing on twelve waves of longitudinal survey data, we establish that height predicts hourly earnings after controlling education, multiple indicators of cognitive performance and physical health status, measures of family background, sectoral and occupational choice, as well as local area market characteristics. The height premium is large and significant in both the wage and self-employed sectors indicating height is not only a signal of worker quality to employers. Since adult stature is largely determined in the first few years of life, we conclude that exposures during this critical period have an enduring impact on labor market productivity. PMID:27843117

Extracellular Polymeric Substance Production and Aggregated Bacteria Colonization Influence the Competition of Microbes in Biofilms.

PubMed

Jayathilake, Pahala G; Jana, Saikat; Rushton, Steve; Swailes, David; Bridgens, Ben; Curtis, Tom; Chen, Jinju

2017-01-01

The production of extracellular polymeric substance (EPS) is important for the survival of biofilms. However, EPS production is costly for bacteria and the bacterial strains that produce EPS (EPS+) grow in the same environment as non-producers (EPS-) leading to competition between these strains for nutrients and space. The outcome of this competition is likely to be dependent on factors such as initial attachment, EPS production rate, ambient nutrient levels and quorum sensing. We use an Individual-based Model (IbM) to study the competition between EPS+ and EPS- strains by varying the nature of initial colonizers which can either be in the form of single cells or multicellular aggregates. The microbes with EPS+ characteristics obtain a competitive advantage if they initially colonize the surface as smaller aggregates and are widely spread-out between the cells of EPS-, when both are deposited on the substratum. Furthermore, the results show that quorum sensing-regulated EPS production may significantly reduce the fitness of EPS producers when they initially deposit as aggregates. The results provide insights into how the distribution of bacterial aggregates during initial colonization could be a deciding factor in the competition among different strains in biofilms.

Lightweight aggregate production from claystone and shale in Bangladesh

USGS Publications Warehouse

Parker, Norbert A.; Khan, M.A.

1976-01-01

Muffle furnace tests were made on samples of clay, claystone, and shale collected in the Chittagong and Dacca areas of East Pakistan to determine their amenability to bloating for the commercial production of light-weight aggregate. Several areas, sampled in some detail, were selected for investigation because of their proximity to market, and accessibility to fuel and electricity. Muffle furnace tests show that the clay, claystone, and shale are natural bloaters at temperatures in the 1700? to 2200? F range, and do not require additives. The most desirable deposit, insofar as producing a strong aggregate is concerned, can be determined only by pilot-kiln testing and by crushing-strength tests made on concrete test cylinders. Reserves of suitable raw material are large in both the Chittagong and Dacca areas.

Hydroxychavicol, a novel betel leaf component, inhibits platelet aggregation by suppression of cyclooxygenase, thromboxane production and calcium mobilization.

PubMed

Chang, M C; Uang, B J; Tsai, C Y; Wu, H L; Lin, B R; Lee, C S; Chen, Y J; Chang, C H; Tsai, Y L; Kao, C J; Jeng, J H

2007-09-01

Platelet hyperactivity is important in the pathogenesis of cardiovascular diseases. Betel leaf (PBL) is consumed by 200-600 million betel quid chewers in the world. Hydroxychavicol (HC), a betel leaf component, was tested for its antiplatelet effect. We tested the effect of HC on platelet aggregation, thromboxane B(2) (TXB(2)) and reactive oxygen species (ROS) production, cyclooxygenase (COX) activity, ex vivo platelet aggregation and mouse bleeding time and platelet plug formation in vivo. The pharmacokinetics of HC in rats was also assessed. HC inhibited arachidonic acid (AA) and collagen-induced platelet aggregation and TXB(2) production. HC inhibited the thrombin-induced TXB(2) production, but not platelet aggregation. SQ29548, suppressed collagen- and thrombin-induced TXB(2) production, but not thrombin-induced platelet aggregation. HC also suppressed COX-1/COX-2 enzyme activity and the AA-induced ROS production and Ca(2+) mobilization. HC further inhibited the ex vivo platelet aggregation of platelet-rich plasma (>100 nmole/mouse) and prolonged platelet plug formation (>300 nmole/mouse) in mesenteric microvessels, but showed little effect on bleeding time in mouse tail. Moreover, pharmacokinetics analysis found that more than 99% of HC was metabolized within 3 min of administration in Sprague-Dawley rats in vivo. HC is a potent COX-1/COX-2 inhibitor, ROS scavenger and inhibits platelet calcium signaling, TXB(2) production and aggregation. HC could be a potential therapeutic agent for prevention and treatment of atherosclerosis and other cardiovascular diseases through its anti-inflammatory and antiplatelet effects, without effects on haemostatic functions.

Production of mineral aggregates in quartz tumbling experiments

NASA Astrophysics Data System (ADS)

Nørnberg, Per; Finster, Kai; Pall Gunnlaugsson, Haraldur; Knak Jensen, Svend; Merrison, Jonathan Peter

2013-04-01

Introduction Tumbling experiments with quartz sand with the purpose of tracing the effect of broken bonds in mineral surfaces resulted in an unexpected production of aggregates. These aggregates are a few microns in diameter, spherical and resembling tiny white "snowballs." Particle comminution by aeolian and other natural weathering processes are known in soil science and is often seen as an increase of fine particles towards the top of soil profiles (Nørnberg, P. 1987, 1988, 2002, J.S. Wright 2007). When mineral grains collide in aeolian processes they break up along weakness zones in the crystal lattice. This mechanism causes broken bonds between atoms in the crystal lattice and results in reactive groups in the mineral surface. This mechanism provides the background for experiments to investigate the oxidation processes of magnetite on the planet Mars. The primary magnetic iron oxide phase on Mars is to day known to be magnetite and the colour of the dust on Mars is most likely due to hematite. To investigate if the oxidation process could take place without going over dissolution and precipitation in water, experiments with tumbling of quartz grains in sealed glass containers along with magnetite were started. The idea was that activated bonds at the surface of quartz could oxidize magnetite and convert it to hematite over time. This proved to be the case (Merrison, J.P. et al. 2010). However, in these experiments we observed the formation of the white aggregates which has been the subject of the study that we present here. Results of tumbling experiments Commercially available quarts (Merck) was sieved to obtain the fraction between 125 and 1000 µm. This fraction was tumbled in glass containers for months and resulted in production of a significant amount of fine grained material (Merrison, J.P et al. 2010). A part of this fine fraction consists of the "snowball"-like aggregates which is a fragile element with relatively high specific surface. The physical

78 FR 38075 - International Labor Comparisons

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

.... ADDRESSES: Send inquiries to John Ruser, Office of Productivity and Technology, Bureau of Labor Statistics... FURTHER INFORMATION CONTACT: John Ruser, Office of Productivity and Technology, Bureau of Labor Statistics...

Hydroxychavicol, a novel betel leaf component, inhibits platelet aggregation by suppression of cyclooxygenase, thromboxane production and calcium mobilization

PubMed Central

Chang, M C; Uang, B J; Tsai, C Y; Wu, H L; Lin, B R; Lee, C S; Chen, Y J; Chang, C H; Tsai, Y L; Kao, C J; Jeng, J H

2007-01-01

Background and purpose: Platelet hyperactivity is important in the pathogenesis of cardiovascular diseases. Betel leaf (PBL) is consumed by 200-600 million betel quid chewers in the world. Hydroxychavicol (HC), a betel leaf component, was tested for its antiplatelet effect. Experimental approach: We tested the effect of HC on platelet aggregation, thromboxane B2 (TXB2) and reactive oxygen species (ROS) production, cyclooxygenase (COX) activity, ex vivo platelet aggregation and mouse bleeding time and platelet plug formation in vivo. The pharmacokinetics of HC in rats was also assessed. Key results: HC inhibited arachidonic acid (AA) and collagen-induced platelet aggregation and TXB2 production. HC inhibited the thrombin-induced TXB2 production, but not platelet aggregation. SQ29548, suppressed collagen- and thrombin-induced TXB2 production, but not thrombin-induced platelet aggregation. HC also suppressed COX-1/COX-2 enzyme activity and the AA-induced ROS production and Ca2+ mobilization. HC further inhibited the ex vivo platelet aggregation of platelet-rich plasma (>100 nmole/mouse) and prolonged platelet plug formation (>300 nmole/mouse) in mesenteric microvessels, but showed little effect on bleeding time in mouse tail. Moreover, pharmacokinetics analysis found that more than 99% of HC was metabolized within 3 min of administration in Sprague-Dawley rats in vivo. Conclusions and implications: HC is a potent COX-1/COX-2 inhibitor, ROS scavenger and inhibits platelet calcium signaling, TXB2 production and aggregation. HC could be a potential therapeutic agent for prevention and treatment of atherosclerosis and other cardiovascular diseases through its anti-inflammatory and antiplatelet effects, without effects on haemostatic functions. PMID:17641677

Applying linear programming model to aggregate production planning of coated peanut products

NASA Astrophysics Data System (ADS)

Rohmah, W. G.; Purwaningsih, I.; Santoso, EF S. M.

2018-03-01

The aim of this study was to set the overall production level for each grade of coated peanut product to meet market demands with a minimum production cost. The linear programming model was applied in this study. The proposed model was used to minimize the total production cost based on the limited demand of coated peanuts. The demand values applied to the method was previously forecasted using time series method and production capacity aimed to plan the aggregate production for the next 6 month period. The results indicated that the production planning using the proposed model has resulted a better fitted pattern to the customer demands compared to that of the company policy. The production capacity of product family A, B, and C was relatively stable for the first 3 months of the planning periods, then began to fluctuate over the next 3 months. While, the production capacity of product family D and E was fluctuated over the 6-month planning periods, with the values in the range of 10,864 - 32,580 kg and 255 – 5,069 kg, respectively. The total production cost for all products was 27.06% lower than the production cost calculated using the company’s policy-based method.

A study in cost analysis of aggregate production as depending on drilling and blasting design

NASA Astrophysics Data System (ADS)

Bilim, Niyazi; Çelik, Arif; Kekeç, Bilgehan

2017-10-01

Since aggregate production has vital importance for many engineering projects-such as construction, highway and plant-mixed concrete production-this study was undertaken to determine how the costs for such production are affected by the design of drilling and blasting processes used. Aggregates are used in the production of concrete and asphalt, which are critical resources for the construction sector. The ongoing population increase and the growth of living standards around the world drive the increasing demand for these products. As demand grows, competition has naturally arisen among producers in the industry. Competition in the market has directly affected prices, which leads to the need for new measures and cost analysis on production costs. The cost calculation is one of the most important parameters in mining activities. Aggregate production operations include drilling, blasting, secondary crushing (if necessary), loading, hauling and crushing-screening, and each of these factors affects cost. In this study, drilling and blasting design parameters (such as hole diameter, hole depth, hole distance and burden) were investigated and evaluated for their effect on the total cost of quarrying these products, based on a particular quarry selected for this research. As the result of evaluation, the parameters actually driving costs have been identified, and their effects on the cost have been determined. In addition, some suggestions are presented regarding production design which may lead to avoiding increased production costs.

Child Labor Requirements in Nonagricultural Occupations under the Fair Labor Standards Act. Child Labor Bulletin No. 101.

ERIC Educational Resources Information Center

Employment Standards Administration (DOL), Washington, DC. Wage and Hour Div.

This booklet is a guide to the provisions of the Fair Labor Standards Act (also known as the Wage-Hour Law) which apply to minors employed in nonagricultural occupations. The content is as follows: coverage of the child labor provisions (covers employees in commerce, the production of goods for commerce, an enterprise engaged in commerce, and an…

Utilization of lignite power generation residues for the production of lightweight aggregates.

PubMed

Anagnostopoulos, Iason M; Stivanakis, Victor E

2009-04-15

A novel process is proposed for the utilization of lignite combustion solid residues in the production of inflammable lightweight aggregates (LWA). The process consists of two stages, pelletization and sintering, and carbon contained in BA was used as the process fuel. The main residues bottom ash (BA) and fly ash (FA) from Megalopolis power plant were characterized, mixed in different proportions and treated through pelletization and sintering process. Sintering benefits from combustion of BA carbon content and the product is a hardened porous cake. The energy required for achievement of high temperatures, in the range of 1250 degrees C, was offered by carbon combustion and CO(2) evolution is responsible for porous structure formation. Selected physical properties of sintered material relevant to use as lightweight aggregates were determined, including bulk density, porosity and water absorption. Bulk density varies from 0.83 to 0.91 g/cm(3), porosity varies from 60% to 64% and water absorption varies from 66% to 80%. LWA formed is used for the production of lightweight aggregate concrete (LWAC). Thermal conductivity coefficient varies from 0.25 to 0.37 W/mK (lower than maximum limit 0.43 W/mK) and compressive strength varies from 19 to 23 MPa (higher than minimum limit 17 MPa). The results indicate that sintering of lignite combustion residues is an efficient method of utilization of carbon containing BA and production of LWA for structural and insulating purposes. Carbon content of BA is a key factor in LWA production. Finally, this research work comprises the first proposed application for utilization of BA in Greece.

A novel heuristic for optimization aggregate production problem: Evidence from flat panel display in Malaysia

NASA Astrophysics Data System (ADS)

Al-Kuhali, K.; Hussain M., I.; Zain Z., M.; Mullenix, P.

2015-05-01

Aim: This paper contribute to the flat panel display industry it terms of aggregate production planning. Methodology: For the minimization cost of total production of LCD manufacturing, a linear programming was applied. The decision variables are general production costs, additional cost incurred for overtime production, additional cost incurred for subcontracting, inventory carrying cost, backorder costs and adjustments for changes incurred within labour levels. Model has been developed considering a manufacturer having several product types, which the maximum types are N, along a total time period of T. Results: Industrial case study based on Malaysia is presented to test and to validate the developed linear programming model for aggregate production planning. Conclusion: The model development is fit under stable environment conditions. Overall it can be recommended to adapt the proven linear programming model to production planning of Malaysian flat panel display industry.

Labor Market Frictions and Production Efficiency in Public Schools. Working Paper 163

ERIC Educational Resources Information Center

Kim, Dongwoo; Koedel, Cory; Ni, Shawn; Podgursky, Michael

2016-01-01

State-specific licensing policies and pension plans create mobility costs for educators who cross state lines. We empirically test whether these costs affect production in schools--a hypothesis that follows directly from economic theory on labor frictions--using geo-coded data from the lower-48 states. We find that achievement is lower in…

An analysis of mobile whole blood collection labor efficiency.

PubMed

Rose, William N; Dayton, Paula J; Raife, Thomas J

2011-07-01

Labor efficiency is desirable in mobile blood collection. There are few published data on labor efficiency. The variability in the labor efficiency of mobile whole blood collections was analyzed. We determined to improve our labor efficiency using lean manufacturing principles. Workflow changes in mobile collections were implemented with the goal of minimizing labor expenditures. To measure success, data on labor efficiency measured by units/hour/full-time equivalent (FTE) were collected. The labor efficiency in a 6-month period before the implementation of changes, and in months 1 to 6 and 7 to 12 after implementation was analyzed and compared. Labor efficiency in the 6-month period preceding implementation was 1.06 ± 0.4 units collected/hour/FTE. In months 1 to 6, labor efficiency declined slightly to 0.92 ± 0.4 units collected/hour/FTE (p = 0.016 vs. preimplementation). In months 7 to 12, the mean labor efficiency returned to preimplementation levels of 1.09 ±0.4 units collected/hour/FTE. Regression analysis correlating labor efficiency with total units collected per drive revealed a strong correlation (R(2) = 0.48 for the aggregate data from all three periods), indicating that nearly half of labor efficiency was associated with drive size. The lean-based changes in workflow were subjectively favored by employees and donors. The labor efficiency of our mobile whole blood drives is strongly influenced by size. Larger drives are more efficient, with diminishing returns above 40 units collected. Lean-based workflow changes were positively received by employees and donors. © 2011 American Association of Blood Banks.

Non-Arrhenius protein aggregation.

PubMed

Wang, Wei; Roberts, Christopher J

2013-07-01

Protein aggregation presents one of the key challenges in the development of protein biotherapeutics. It affects not only product quality but also potentially impacts safety, as protein aggregates have been shown to be linked with cytotoxicity and patient immunogenicity. Therefore, investigations of protein aggregation remain a major focus in pharmaceutical companies and academic institutions. Due to the complexity of the aggregation process and temperature-dependent conformational stability, temperature-induced protein aggregation is often non-Arrhenius over even relatively small temperature windows relevant for product development, and this makes low-temperature extrapolation difficult based simply on accelerated stability studies at high temperatures. This review discusses the non-Arrhenius nature of the temperature dependence of protein aggregation, explores possible causes, and considers inherent hurdles for accurately extrapolating aggregation rates from conventional industrial approaches for selecting accelerated conditions and from conventional or more advanced methods of analyzing the resulting rate data.

76 FR 77016 - Controlled Substances: Final Adjusted Aggregate Production Quotas for 2011

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-09

... substances previously referenced, expressed in grams of anhydrous acid or base, as follows: Final adjusted...), diphenoxylate, fentanyl, gamma hydroxybutyric acid, hydrocodone, meperidine, methadone, methadone [[Page 77017... 2011 aggregate production quotas for alfentanil, diphenoxylate, gamma hydroxybutyric acid, meperidine...

48 CFR 52.222-18 - Certification Regarding Knowledge of Child Labor for Listed End Products.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for Listed End Products. As prescribed in 22.1505(a), insert the following provision: Certification... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Certification Regarding Knowledge of Child Labor for Listed End Products. 52.222-18 Section 52.222-18 Federal Acquisition...

77 FR 39737 - Controlled Substances: Proposed Adjustment to the Aggregate Production Quotas for 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-05

... aggregate production quotas for some schedule I and II controlled substances, expressed in grams of.... [750,000 grams of levo-desoxyephedrine for use in a non-controlled, non-prescription product; 2,331,000 grams for methamphetamine mostly for conversion to a schedule III product; and 49,000 grams for...

Identification and Analysis of Labor Productivity Components Based on ACHIEVE Model (Case Study: Staff of Kermanshah University of Medical Sciences)

PubMed Central

Ziapour, Arash; Khatony, Alireza; Kianipour, Neda; Jafary, Faranak

2015-01-01

Identification and analysis of the components of labor productivity based on ACHIEVE model was performed among employees in different parts of Kermanshah University of Medical Sciences in 2014. This was a descriptive correlational study in which the population consisted of 270 working personnel in different administrative groups (contractual, fixed- term and regular) at Kermanshah University of Medical Sciences (872 people) that were selected among 872 people through stratified random sampling method based on Krejcie and Morgan sampling table. The survey tool included labor productivity questionnaire of ACHIEVE. Questionnaires were confirmed in terms of content and face validity, and their reliability was calculated using Cronbach’s alpha coefficient. The data were analyzed by SPSS-18 software using descriptive and inferential statistics. The mean scores for labor productivity dimensions of the employees, including environment (environmental fit), evaluation (training and performance feedback), validity (valid and legal exercise of personnel), incentive (motivation or desire), help (organizational support), clarity (role perception or understanding), ability (knowledge and skills) variables and total labor productivity were 4.10±0.630, 3.99±0.568, 3.97±0.607, 3.76±0.701, 3.63±0.746, 3.59±0.777, 3.49±0.882 and 26.54±4.347, respectively. Also, the results indicated that the seven factors of environment, performance assessment, validity, motivation, organizational support, clarity, and ability were effective in increasing labor productivity. The analysis of the current status of university staff in the employees’ viewpoint suggested that the two factors of environment and evaluation, which had the greatest impact on labor productivity in the viewpoint of the staff, were in a favorable condition and needed to be further taken into consideration by authorities. PMID:25560364

Identification and analysis of labor productivity components based on ACHIEVE model (case study: staff of Kermanshah University of Medical Sciences).

PubMed

Ziapour, Arash; Khatony, Alireza; Kianipour, Neda; Jafary, Faranak

2014-12-15

Identification and analysis of the components of labor productivity based on ACHIEVE model was performed among employees in different parts of Kermanshah University of Medical Sciences in 2014. This was a descriptive correlational study in which the population consisted of 270 working personnel in different administrative groups (contractual, fixed- term and regular) at Kermanshah University of Medical Sciences (872 people) that were selected among 872 people through stratified random sampling method based on Krejcie and Morgan sampling table. The survey tool included labor productivity questionnaire of ACHIEVE. Questionnaires were confirmed in terms of content and face validity, and their reliability was calculated using Cronbach's alpha coefficient. The data were analyzed by SPSS-18 software using descriptive and inferential statistics. The mean scores for labor productivity dimensions of the employees, including environment (environmental fit), evaluation (training and performance feedback), validity (valid and legal exercise of personnel), incentive (motivation or desire), help (organizational support), clarity (role perception or understanding), ability (knowledge and skills) variables and total labor productivity were 4.10±0.630, 3.99±0.568, 3.97±0.607, 3.76±0.701, 3.63±0.746, 3.59±0.777, 3.49±0.882 and 26.54±4.347, respectively. Also, the results indicated that the seven factors of environment, performance assessment, validity, motivation, organizational support, clarity, and ability were effective in increasing labor productivity. The analysis of the current status of university staff in the employees' viewpoint suggested that the two factors of environment and evaluation, which had the greatest impact on labor productivity in the viewpoint of the staff, were in a favorable condition and needed to be further taken into consideration by authorities.

Data on optimum recycle aggregate content in production of new structural concrete.

PubMed

Paul, Suvash Chandra

2017-12-01

This data presented herein are the research summary of "mechanical behavior and durability performance of concrete containing recycled concrete aggregate" (Paul, 2011) [1]. The results reported in this article relate to an important parameter of optimum content of recycle concrete aggregate (RCA) in production of new concrete for both structural and non-structural applications. For the purpose of the research various types of physical, mechanical and durability tests are performed for concrete made with different percentages of RCA. Therefore, this data set can be a great help of the readers to understand the mechanism of RCA in relates to the concrete properties.

Aggregate consumer exposure to UV filter ethylhexyl methoxycinnamate via personal care products.

PubMed

Manová, Eva; von Goetz, Natalie; Hungerbuehler, Konrad

2015-01-01

Ultraviolet (UV) filters are substances designed to protect our skin from UV-induced damage and can be found in many categories of personal care products (PCPs). The potential endocrine-disrupting effects attributed to UV filter ethylhexyl methoxycinnamate (EHMC) are being debated. We evaluated the aggregate exposure of the Swiss-German population (N=1196; ages ≤1-97years) to EHMC via the use of PCPs; thus we provide the first comprehensive information about the current EHMC exposure sources and aggregate exposure levels. In our probabilistic modeling method performed at an individual level, PCP use data obtained by a postal questionnaire were linked to concentration data on EHMC gained from chemical analyses of PCPs used by the questionnaire respondents. The modeled median and 99.9th percentile of the internal aggregate exposure for the general population were 0.012 and 0.873mgday(-1)kg(-1) and 0.008 and 0.122mgday(-1)kg(-1) for the summer/autumn and winter/spring period, respectively. The major contributors to internal aggregate exposure were sunscreen products in summer/autumn (females: 64%; males: 85%; children aged ≤12years 93%). In winter/spring, lip care dominated for females (30%) and sunscreen for males (38%) and children aged ≤12years (50%). Overall, the internal aggregate exposure estimates for the studied population are shown to be below the Derived No Effect Level (DNEL) for EHMC i.e., the level of exposure above which humans should not be exposed; however, when an intense short-term exposure via sunscreen is accounted for during a sunbathing day, at the high-end percentiles (99.9th) the predicted aggregate exposure exceeds the DNEL for thyroid-disrupting effects such as for children aged ≤4years, who might be particularly susceptible to endocrine disrupting events. It is nevertheless critical to acknowledge that quantitative data on transdermal penetration of EHMC from PCPs are currently insufficient. Since long-term effects of endocrine

The Minimum Wage, Restaurant Prices, and Labor Market Structure

ERIC Educational Resources Information Center

Aaronson, Daniel; French, Eric; MacDonald, James

2008-01-01

Using store-level and aggregated Consumer Price Index data, we show that restaurant prices rise in response to minimum wage increases under several sources of identifying variation. We introduce a general model of employment determination that implies minimum wage hikes cause prices to rise in competitive labor markets but potentially fall in…

Lake States Pulpwood Production Hampered by Adverse Weather and Labor Shortage, 1965

Treesearch

Arthur G. Horn

1966-01-01

Demand for Lake States pulpwood gained strength in 1965, but production failed to rise. Adverse weather during part of the year and a general shortage of woods labor were deterrents to a larger harvest. The total pulpwood cut was 3,636,000 cords in 1965, representing very little change over the level of the 2 previous years. The tempo of pulpwood activities started...

Strikes, Scabs, and Tread Separations: Labor Strife and the Production of Defective Bridgestone/firestone Tires.

ERIC Educational Resources Information Center

Krueger, Alan B.; Mas, Alexandre

2004-01-01

This paper provides a case study of the effect of labor relations on product quality. We consider whether a long, contentious strike and the hiring of replacement workers at Bridgestone/Firestone's Decatur, Illinois, plant in the mid-1990s contributed to the production of defective tires. Using several independent data sources and looking before…

MIGRATORY LABOR IN COLORADO.

ERIC Educational Resources Information Center

DOUGLASS, M.R.; AND OTHERS

CONDITIONS AND PROBLEMS RELATING TO THE EMPLOYMENT OF SEASONAL FARM WORKERS AND MIGRANTS IN COLORADO ARE PRESENTED. THE FIVE MAJOR SEASONAL FARM LABOR STATE EMPLOYMENT AREAS ARE SURVEYED ACCORDING TO (1) THE ORGANIZATION OF THE SEASONAL FARM LABOR (4) TRENDS IN AGRICULTURAL ACREAGE, PRODUCTION, AND TECHNOLOGICAL CHANGE, (5) COMMUNITY ATTITUDES AND…

Marine Synechococcus Aggregation

NASA Astrophysics Data System (ADS)

Neuer, S.; Deng, W.; Cruz, B. N.; Monks, L.

2016-02-01

Cyanobacteria are considered to play an important role in the oceanic biological carbon pump, especially in oligotrophic regions. But as single cells are too small to sink, their carbon export has to be mediated by aggregate formation and possible consumption by zooplankton producing sinking fecal pellets. Here we report results on the aggregation of the ubiquitous marine pico-cyanobacterium Synechococcus as a model organism. We first investigated the mechanism behind such aggregation by studying the potential role of transparent exopolymeric particles (TEP) and the effects of nutrient (nitrogen or phosphorus) limitation on the TEP production and aggregate formation of these pico-cyanobacteria. We further studied the aggregation and subsequent settling in roller tanks and investigated the effects of the clays kaolinite and bentonite in a series of concentrations. Our results show that despite of the lowered growth rates, Synechococcus in nutrient limited cultures had larger cell-normalized TEP production, formed a greater volume of aggregates, and resulted in higher settling velocities compared to results from replete cultures. In addition, we found that despite their small size and lack of natural ballasting minerals, Synechococcus cells could still form aggregates and sink at measureable velocities in seawater. Clay minerals increased the number and reduced the size of aggregates, and their ballasting effects increased the sinking velocity and carbon export potential of aggregates. In comparison with the Synechococcus, we will also present results of the aggregation of the pico-cyanobacterium Prochlorococcus in roller tanks. These results contribute to our understanding in the physiology of marine Synechococcus as well as their role in the ecology and biogeochemistry in oligotrophic oceans.

Diatom aggregation and dimethylsulfide production in phytoplankton blooms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crocker, K.M.

1994-01-01

Phytoplankton blooms are crucial links in many of the earth's biogeochemical cycles. Blooms take up atmospheric carbon through photosynthesis, and sequester it on the ocean floor by sinking. Aggregation of single cells into [open quote]marine snow[close quote] particles speeds up the sinking of algal cells. Laboratory studies investigating the process of aggregation show that some species have a higher probability of aggregating than others, and that there exist several mechanisms for causing aggregation. Field studies confirm that some species are more likely to be found in aggregates than in the surrounding seawater. High latitude Premnesiophyte blooms are found to producemore » large amounts of dimethylsulflde (DMS), believed to be an important chemical in global thermoregulation. DMS is found to vary diurnally, possibly due to photooxidation by ultraviolet light. This possibility links the effects of DMS on cloud formation with the effects of increased ultraviolet light penetrating the earths ozone layer.« less

Oil-Price Shocks: Beyond Standard Aggregate Demand/Aggregate Supply Analysis.

ERIC Educational Resources Information Center

Elwood, S. Kirk

2001-01-01

Explores the problems of portraying oil-price shocks using the aggregate demand/aggregate supply model. Presents a simple modification of the model that differentiates between production and absorption of goods, which enables it to better reflect the effects of oil-price shocks on open economies. (RLH)

Cold rescue of the thermolabile tailspike intermediate at the junction between productive folding and off-pathway aggregation.

PubMed Central

Betts, S. D.; King, J.

1998-01-01

Off-pathway intermolecular interactions between partially folded polypeptide chains often compete with correct intramolecular interactions, resulting in self-association of folding intermediates into the inclusion body state. Intermediates for both productive folding and off-pathway aggregation of the parallel beta-coil tailspike trimer of phage P22 have been identified in vivo and in vitro using native gel electrophoresis in the cold. Aggregation of folding intermediates was suppressed when refolding was initiated and allowed to proceed for a short period at 0 degrees C prior to warming to 20 degrees C. Yields of refolded tailspike trimers exceeding 80% were obtained using this temperature-shift procedure, first described by Xie and Wetlaufer (1996, Protein Sci 5:517-523). We interpret this as due to stabilization of the thermolabile monomeric intermediate at the junction between productive folding and off-pathway aggregation. Partially folded monomers, a newly identified dimer, and the protrimer folding intermediates were populated in the cold. These species were electrophoretically distinguished from the multimeric intermediates populated on the aggregation pathway. The productive protrimer intermediate is disulfide bonded (Robinson AS, King J, 1997, Nat Struct Biol 4:450-455), while the multimeric aggregation intermediates are not disulfide bonded. The partially folded dimer appears to be a precursor to the disulfide-bonded protrimer. The results support a model in which the junctional partially folded monomeric intermediate acquires resistance to aggregation in the cold by folding further to a conformation that is activated for correct recognition and subunit assembly. PMID:9684883

Dynamics of transparent exopolymer particle (TEP) production and aggregation during viral infection of the coccolithophore, Emiliania huxleyi.

PubMed

Nissimov, Jozef I; Vandzura, Rebecca; Johns, Christopher T; Natale, Frank; Haramaty, Liti; Bidle, Kay D

2018-06-19

Emiliania huxleyi produces calcium carbonate (CaCO 3 ) coccoliths and transparent exopolymer particles (TEP), sticky, acidic carbohydrates that facilitate aggregation. E. huxleyi's extensive oceanic blooms are often terminated by coccolithoviruses (EhVs) with the transport of cellular debris and associated particulate organic carbon (POC) to depth being facilitated by TEP-bound "marine snow" aggregates. The dynamics of TEP production and particle aggregation in response to EhV infection are poorly understood. Using flow cytometry, spectrophotometry, and FlowCam visualization of alcian blue (AB)-stained aggregates, we assessed TEP production and the size spectrum of aggregates for E. huxleyi possessing different degrees of calcification and cellular CaCO 3 :POC mass ratios, when challenged with two EhVs (EhV207 and EhV99B1). FlowCam imaging also qualitatively assessed the relative amount of AB-stainable TEP (i.e. blue:red ratio of each particle). We show significant increases in TEP during early phase EhV207-infection (∼24 hours) of calcifying strains and a shift towards large aggregates following EhV99B1-infection. We also observed the formation of large aggregates with low blue:red ratios, suggesting that other exopolymer substances contribute towards aggregation. Our findings show the potential for virus infection and the associated response of their hosts to impact carbon flux dynamics and provide incentive to explore these dynamics in natural populations. This article is protected by copyright. All rights reserved. © 2018 Society for Applied Microbiology and John Wiley & Sons Ltd.

Skin sensitisation quantitative risk assessment (QRA) based on aggregate dermal exposure to methylisothiazolinone in personal care and household cleaning products.

PubMed

Ezendam, J; Bokkers, B G H; Bil, W; Delmaar, J E

2018-02-01

Contact allergy to preservatives is an important public health problem. Ideally, new substances should be evaluated for the risk on skin sensitisation before market entry, for example by using a quantitative risk assessment (QRA) as developed for fragrances. As a proof-of-concept, this QRA was applied to the preservative methylisothiazolinone (MI), a common cause of contact allergy. MI is used in different consumer products, including personal care products (PCPs) and household cleaning products (HCPs). Aggregate exposure to MI in PCPs and HCPs was therefore assessed with the Probabilistic Aggregated Consumer Exposure Model (PACEM). Two exposure scenarios were evaluated: scenario 1 calculated aggregate exposure on actual MI product concentrations before the restricted use in PCPs and scenario 2 calculated aggregate exposure using the restrictions for MI in PCPs. The QRA for MI showed that in scenarios 1 and 2, the proportion of the population at risk for skin sensitisation is 0.7% and 0.5%, respectively. The restricted use of MI in PCPs does not seem very effective in lowering the risk on skin sensitization. To conclude, it is important to consider aggregate exposure from the most important consumer products into consideration in the risk assessment. Copyright © 2018 Elsevier Ltd. All rights reserved.

Optimization the composition of sand-lime products modified of diabase aggregate

NASA Astrophysics Data System (ADS)

Komisarczyk, K.; Stępień, A.

2017-10-01

The problem of optimizing the composition of building materials is currently of great importance due to the increasing competitiveness and technological development in the construction industry. This phenomenon also applies to catalog sand-lime. The respective arrangement of individual components or their equivalents, and linking them with the main parameters of the composition of the mixture, i.e. The lime/sand/water should lead to the intended purpose. The introduction of sand-lime diabase aggregate is concluded with a positive effect of final products. The paper presents the results of optimization with the addition of diabase aggregate. The constant value was the amount of water, variable - the mass of the dry ingredients. The program of experimental studies was taken for 6 series of silicates made in industrial conditions. Final samples were tested for mechanical and physico-chemical expanding the analysis of the mercury intrusion porosimetry, SEM and XRD. The results show that, depending on the aggregate’s contribution, exhibit differences. The sample in an amount of 10% diabase aggregate the compressive strength was higher than in the case of reference sample, while modified samples absorbed less water.

Process for producing an aggregate suitable for inclusion into a radiation shielding product

DOEpatents

Lessing, Paul A.; Kong, Peter C.

2000-01-01

The present invention is directed to methods for converting depleted uranium hexafluoride to a stable depleted uranium silicide in a one-step reaction. Uranium silicide provides a stable aggregate material that can be added to concrete to increase the density of the concrete and, consequently, shield gamma radiation. As used herein, the term "uranium silicide" is defined as a compound generically having the formula U.sub.x Si.sub.y, wherein the x represents the molecules of uranium and the y represent the molecules of silicon. In accordance with the present invention, uranium hexafluoride is converted to a uranium silicide by contacting the uranium hexafluoride with a silicon-containing material at a temperature in a range between about 1450.degree. C. and about 1750.degree. C. The stable depleted uranium silicide is included as an aggregate in a radiation shielding product, such as a concrete product.

Self-Healing Capacity of Asphalt Mixtures Including By-Products Both as Aggregates and Heating Inductors.

PubMed

Vila-Cortavitarte, Marta; Jato-Espino, Daniel; Castro-Fresno, Daniel; Calzada-Pérez, Miguel Á

2018-05-15

Major advances have been achieved in the field of self-healing by magnetic induction in which the addition of metallic particles into asphalt mixtures enables repairing their own cracks. This technology has already been proven to increase the life expectancy of roads. Nevertheless, its higher costs in comparison with conventional maintenance caused by the price of virgin metallic particles still makes it unattractive for investment. This research aimed at making this process economically accessible as well as environmentally efficient. To this end, an intense search for suitable industrial by-products to substitute both the virgin metal particles and the natural aggregates forming asphalt mixtures was conducted. The set of by-products used included sand blasting wastes, stainless shot wastes, and polished wastes as metallic particles and other inert by-products as aggregates. The results demonstrated that the by-products were adequately heated, which leads to satisfactory healing ratios in comparison with the reference mixture.

Self-Healing Capacity of Asphalt Mixtures Including By-Products Both as Aggregates and Heating Inductors

PubMed Central

Castro-Fresno, Daniel; Calzada-Pérez, Miguel Á.

2018-01-01

Major advances have been achieved in the field of self-healing by magnetic induction in which the addition of metallic particles into asphalt mixtures enables repairing their own cracks. This technology has already been proven to increase the life expectancy of roads. Nevertheless, its higher costs in comparison with conventional maintenance caused by the price of virgin metallic particles still makes it unattractive for investment. This research aimed at making this process economically accessible as well as environmentally efficient. To this end, an intense search for suitable industrial by-products to substitute both the virgin metal particles and the natural aggregates forming asphalt mixtures was conducted. The set of by-products used included sand blasting wastes, stainless shot wastes, and polished wastes as metallic particles and other inert by-products as aggregates. The results demonstrated that the by-products were adequately heated, which leads to satisfactory healing ratios in comparison with the reference mixture. PMID:29762533

A deterministic aggregate production planning model considering quality of products

NASA Astrophysics Data System (ADS)

Madadi, Najmeh; Yew Wong, Kuan

2013-06-01

Aggregate Production Planning (APP) is a medium-term planning which is concerned with the lowest-cost method of production planning to meet customers' requirements and to satisfy fluctuating demand over a planning time horizon. APP problem has been studied widely since it was introduced and formulated in 1950s. However, in several conducted studies in the APP area, most of the researchers have concentrated on some common objectives such as minimization of cost, fluctuation in the number of workers, and inventory level. Specifically, maintaining quality at the desirable level as an objective while minimizing cost has not been considered in previous studies. In this study, an attempt has been made to develop a multi-objective mixed integer linear programming model that serves those companies aiming to incur the minimum level of operational cost while maintaining quality at an acceptable level. In order to obtain the solution to the multi-objective model, the Fuzzy Goal Programming approach and max-min operator of Bellman-Zadeh were applied to the model. At the final step, IBM ILOG CPLEX Optimization Studio software was used to obtain the experimental results based on the data collected from an automotive parts manufacturing company. The results show that incorporating quality in the model imposes some costs, however a trade-off should be done between the cost resulting from producing products with higher quality and the cost that the firm may incur due to customer dissatisfaction and sale losses.

[Study on the occupational stress norm and it's application for the marketing group, public service/safety group and production laborer group].

PubMed

Yang, Xin-Wei; Wang, Zhi-Ming; Jin, Tai-Yi; Lan, Ya-Jia

2006-09-01

A study of the occupational stress norm and it's application for the marketing group, public service/safety group and production laborer group. In this study, cross-sectional study method is used, and a synthetic way of sorting and randomized sampling is adopted to deal with research targets (36 marketing group, 331 public service/safety group, 903 production laborer group). Descriptive statistics for OSI-R scale scores for the marketing group, public service/safety group and production laborer group were modulated. Scale raw score to T-score conversion tables derived from the OSI-R normative sample for marketing group public service/safety group and production laborer group were established. OSI-R profile from for marketing group, public service/safety group and production laborer group were established. For the ORQ and PSQ scales, scores at or above 70 indicate a strong levels of maladaptive stress and strain. Score in the range of 60 to 69 suggest middle levels of maladaptive stress and strain. Score in the range of 40 to 59 indicate normal levels of stress and strain. Score below 40 indicate a relative absence of occupational stress and strain. For the PRQ scales, score below 30 indicate a significant lack of coping resources. Score in the range of 30 to 39 suggest middle deficits in coping resources. Score in the range of 40 to 59 indicate average coping resources. Scores at or above 60 indicate a strong levels of coping resources. The authors combined subjective and objective environment match model of occupational stress. Different intervention measure should be take to reduce the occupational stress so as to improve the work ability.

76 FR 38110 - Notice of Intent To Resume the Agricultural Labor Survey and Farm Labor Reports.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

... agricultural productivity; wage rates are used in the administration of the H-2A Program and for setting... DEPARTMENT OF AGRICULTURE National Agricultural Statistics Service Notice of Intent To Resume the Agricultural Labor Survey and Farm Labor Reports. AGENCY: National Agricultural Statistics Service, USDA...

77 FR 59980 - Established Aggregate Production Quotas for Schedule I and II Controlled Substances and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-01

... certain established aggregate production quotas will mitigate adverse public effects if an unforeseen... Cocaine 240,000 g Codeine (for conversion) 81,250,000 g Codeine (for sale) 49,506,250 g Dextropropoxyphene...

The Japanese Domestic Labor Debate.

ERIC Educational Resources Information Center

Ueno, Chizuko

The changing role of Japanese women can be seen in the stages of a domestic labor debate which occurred at three different times in the past 30 years. The first debate began with Ayako Ishigaki's (1955) insistence that women should have a job outside the home. Wartime production helped break down traditional divisions of labor by encouraging women…

Effect of carbon sources on the aggregation of photo fermentative bacteria induced by L-cysteine for enhancing hydrogen production.

PubMed

Xie, Guo-Jun; Liu, Bing-Feng; Ding, Jie; Wang, Qilin; Ma, Chao; Zhou, Xu; Ren, Nan-Qi

2016-12-01

Poor flocculation of photo fermentative bacteria resulting in continuous biomass washout from photobioreactor is a critical challenge to achieve rapid and stable hydrogen production. In this work, the aggregation of Rhodopseudomonas faecalis RLD-53 was successfully developed in a photobioreactor and the effects of different carbon sources on hydrogen production and aggregation ability were investigated. Extracellular polymeric substances (EPS) production by R. faecalis RLD-53 cultivated using different carbon sources were stimulated by addition of L-cysteine. The absolute ζ potentials of R. faecalis RLD-53 were considerably decreased with addition of L-cysteine, and aggregation barriers based on DLVO dropped to 15-43 % of that in control groups. Thus, R. faecalis RLD-53 flocculated effectively, and aggregation abilities of strain RLD-53 cultivated with acetate, propionate, lactate and malate reached 29.35, 32.34, 26.07 and 24.86 %, respectively. In the continuous test, hydrogen-producing activity was also promoted and reached 2.45 mol H 2 /mol lactate, 3.87 mol H 2 /mol propionate and 5.10 mol H 2 /mol malate, respectively. Therefore, the aggregation of R. faecalis RLD-53 induced by L-cysteine is independent on the substrate types, which ensures the wide application of this technology to enhance hydrogen recovery from wastewater dominated by different organic substrates.

Azaphilones inhibit tau aggregation and dissolve tau aggregates in vitro.

PubMed

Paranjape, Smita R; Riley, Andrew P; Somoza, Amber D; Oakley, C Elizabeth; Wang, Clay C C; Prisinzano, Thomas E; Oakley, Berl R; Gamblin, T Chris

2015-05-20

The aggregation of the microtubule-associated protein tau is a seminal event in many neurodegenerative diseases, including Alzheimer's disease. The inhibition or reversal of tau aggregation is therefore a potential therapeutic strategy for these diseases. Fungal natural products have proven to be a rich source of useful compounds having wide varieties of biological activities. We have previously screened Aspergillus nidulans secondary metabolites for their ability to inhibit tau aggregation in vitro using an arachidonic acid polymerization protocol. One aggregation inhibitor identified was asperbenzaldehyde, an intermediate in azaphilone biosynthesis. We therefore tested 11 azaphilone derivatives to determine their tau assembly inhibition properties in vitro. All compounds tested inhibited tau filament assembly to some extent, and four of the 11 compounds had the advantageous property of disassembling preformed tau aggregates in a dose-dependent fashion. The addition of these compounds to the tau aggregates reduced both the total length and number of tau polymers. The most potent compounds were tested in in vitro reactions to determine whether they interfere with tau's normal function of stabilizing microtubules (MTs). We found that they did not completely inhibit MT assembly in the presence of tau. These derivatives are very promising lead compounds for tau aggregation inhibitors and, more excitingly, for compounds that can disassemble pre-existing tau filaments. They also represent a new class of anti-tau aggregation compounds with a novel structural scaffold.

Monitoring of conditions inside gas aggregation cluster source during production of Ti/TiOx nanoparticles

NASA Astrophysics Data System (ADS)

Kousal, J.; Kolpaková, A.; Shelemin, A.; Kudrna, P.; Tichý, M.; Kylián, O.; Hanuš, J.; Choukourov, A.; Biederman, H.

2017-10-01

Gas aggregation sources are nowadays rather widely used in the research community for producing nanoparticles. However, the direct diagnostics of conditions inside the source are relatively scarce. In this work, we focused on monitoring the plasma parameters and the composition of the gas during the production of the TiOx nanoparticles. We studied the role of oxygen in the aggregation process and the influence of the presence of the particles on the plasma. The construction of the source allowed us to make a 2D map of the plasma parameters inside the source.

77 FR 46519 - Proposed Aggregate Production Quotas for Schedule I and II Controlled Substances and Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-03

... Production Quotas for Schedule I and II Controlled Substances and Proposed Assessment of Annual Needs for the... the Controlled Substances Act (CSA) and assessment of annual needs for the list I chemicals ephedrine... proposed 2013 aggregate production quotas and assessment of annual needs, DEA has taken into account the...

The Optimum Production Method for Quality Improvement of Recycled Aggregates Using Sulfuric Acid and the Abrasion Method.

PubMed

Kim, Haseog; Park, Sangki; Kim, Hayong

2016-07-29

There has been increased deconstruction and demolition of reinforced concrete structures due to the aging of the structures and redevelopment of urban areas resulting in the generation of massive amounts of construction. The production volume of waste concrete is projected to increase rapidly over 100 million tons by 2020. However, due to the high cement paste content, recycled aggregates have low density and high absorption ratio. They are mostly used for land reclamation purposes with low added value instead of multiple approaches. This study was performed to determine an effective method to remove cement paste from recycled aggregates by using the abrasion and substituting the process water with acidic water. The aim of this study is to analyze the quality of the recycled fine aggregates produced by a complex method and investigate the optimum manufacturing conditions for recycled fine aggregates based on the design of experiment. The experimental parameters considered were water ratio, coarse aggregate ratio, and abrasion time and, as a result of the experiment, data concerning the properties of recycled sand were obtained. It was found that high-quality recycled fine aggregates can be obtained with 8.57 min of abrasion-crusher time and a recycled coarse aggregate ratio of over 1.5.

White Ethnics, Racial Prejudice, and Labor Market Segmentation.

ERIC Educational Resources Information Center

Cummings, Scott

The contemporary conflict between blacks and selected white ethnic groups (Catholic immigrants, Jews) is the product of competition for jobs in the secondary labor market. Radical economists have described the existence of a dual labor market within the American economy. The idea of this segmented labor market provides a useful way to integrate…

The combination of simulation and response methodology and its application in an aggregate production plan

NASA Astrophysics Data System (ADS)

Chen, Zhiming; Feng, Yuncheng

1988-08-01

This paper describes an algorithmic structure for combining simulation and optimization techniques both in theory and practice. Response surface methodology is used to optimize the decision variables in the simulation environment. A simulation-optimization software has been developed and successfully implemented, and its application to an aggregate production planning simulation-optimization model is reported. The model's objective is to minimize the production cost and to generate an optimal production plan and inventory control strategy for an aircraft factory.

Patterns of U.S. Economic Growth. 1980 Projections of Final Demand, Interindustry Relationships, Output, Productivity, and Employment.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

This report projects employment by industry for 1980, in order to provide a framework for an occupational outlook program. Included are detailed projections of the labor force, aggregate and industry demand, output, employment, and occupational projections. A 4.3 percent growth rate is projected for gross national product, reflecting an increased…

Division of Labor in Biofilms: the Ecology of Cell Differentiation.

PubMed

van Gestel, Jordi; Vlamakis, Hera; Kolter, Roberto

2015-04-01

The dense aggregation of cells on a surface, as seen in biofilms, inevitably results in both environmental and cellular heterogeneity. For example, nutrient gradients can trigger cells to differentiate into various phenotypic states. Not only do cells adapt physiologically to the local environmental conditions, but they also differentiate into cell types that interact with each other. This allows for task differentiation and, hence, the division of labor. In this article, we focus on cell differentiation and the division of labor in three bacterial species: Myxococcus xanthus, Bacillus subtilis, and Pseudomonas aeruginosa. During biofilm formation each of these species differentiates into distinct cell types, in some cases leading to cooperative interactions. The division of labor and the cooperative interactions between cell types are assumed to yield an emergent ecological benefit. Yet in most cases the ecological benefits have yet to be elucidated. A notable exception is M. xanthus, in which cell differentiation within fruiting bodies facilitates the dispersal of spores. We argue that the ecological benefits of the division of labor might best be understood when we consider the dynamic nature of both biofilm formation and degradation.

Photo-fermentative bacteria aggregation triggered by L-cysteine during hydrogen production

PubMed Central

2013-01-01

Background Hydrogen recovered from organic wastes and solar energy by photo-fermentative bacteria (PFB) has been suggested as a promising bioenergy strategy. However, the use of PFB for hydrogen production generally suffers from a serious biomass washout from photobioreactor, due to poor flocculation of PFB. In the continuous operation, PFB cells cannot be efficiently separated from supernatant and rush out with effluent from reactor continuously, which increased the effluent turbidity, meanwhile led to increases in pollutants. Moreover, to replenish the biomass washout, substrate was continuously utilized for cell growth rather than hydrogen production. Consequently, the poor flocculability not only deteriorated the effluent quality, but also decreased the potential yield of hydrogen from substrate. Therefore, enhancing the flocculability of PFB is urgent necessary to further develop photo-fermentative process. Results Here, we demonstrated that L-cysteine could improve hydrogen production of Rhodopseudomonas faecalis RLD-53, and more importantly, simultaneously trigger remarkable aggregation of PFB. Experiments showed that L-cysteine greatly promoted the production of extracellular polymeric substances, especially secretion of protein containing more disulfide bonds, and help for enhancement stability of floc of PFB. Through formation of disulfide bonds, L-cysteine not only promoted production of EPS, in particular the secretion of protein, but also stabilized the final confirmation of protein in EPS. In addition, the cell surface elements and functional groups, especially surface charged groups, have also been changed by L-cysteine. Consequently, absolute zeta potential reached a minimum value at 1.0 g/l of L-cysteine, which obviously decreased electrostatic repulsion interaction energy based on DLVO theory. Total interaction energy barrier decreased from 389.77 KT at 0.0 g/l of L-cysteine to 127.21 kT at 1.0 g/l. Conclusions Thus, the strain RLD-53 overcame the

Recycling of quarry waste as part of sustainable aggregate production: Norwegian and Italian point of view

NASA Astrophysics Data System (ADS)

Antonella Dino, Giovanna; Willy Danielsen, Svein; Chiappino, Claudia; Primavori, Piero; Engelsen, Christian John

2016-04-01

Resource preservation is one of the main challenges in Europe, together with waste management and recycling; recently several researchers are interested in the recovering of critical raw materials and secondary raw materials from landfill. Aggregate supply, even if it is not "critical" sensus stricto (s.s.), is one of the European priorities (low value but high volume needs). On the other side, the management of quarry waste , mainly from dimension stones, but also as fines from aggregate crushing, is still a matter of concern. Such materials are managed in different ways both locally and nationwide, and often they are landfilled, because of an unclear legislation and a general lack of data. Most of time the local authorities adopt the maximum precaution principle or the enterprises find it little profitable to recover them, so that the sustainable recycling of such material is not valued. Several studies have shown, depending on the material specific characteristics, the viability of recycling quarry waste into new raw materials used in glass and ceramic industries, precast concrete production, infrastructures etc. (Loudes et al. 2012, Dino&Marian 2015, Bozzola et al 2012, Dino et al. 2012, etc.). Thus, aggregate production may be one of the profitable ways to use quarry waste and is falling under the priority of EU (aggregate supply). Positive economic and environmental effects are likely to be achieved by systematic recycling of quarry waste planned by industries (industrial planning) and public authorities (national and local planning of aggregate exploitation). Today, the recycling level varies to a great extent and systematic recovery is not common among European Countries. In Italy and Norway no significant incentives on recycling or systematic approaches for local aggregate exploitation exist. The environmental consequences can be overexploitation of the natural resources, land take for the landfills, environmental contamination and landscape alteration by

78 FR 37237 - Proposed Adjustments to the Aggregate Production Quotas for Schedule I and II Controlled...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

... reserve in certain established aggregate production quotas will mitigate adverse public effects if an...,000 g 47,186,000 g. Carfentanil 6 g No change. Cocaine 240,000 g No change. Codeine (for conversion...

Construction aggregates

USGS Publications Warehouse

Nelson, T.I.; Bolen, W.P.

2007-01-01

Construction aggregates, primarily stone, sand and gravel, are recovered from widespread naturally occurring mineral deposits and processed for use primarily in the construction industry. They are mined, crushed, sorted by size and sold loose or combined with portland cement or asphaltic cement to make concrete products to build roads, houses, buildings, and other structures. Much smaller quantities are used in agriculture, cement manufacture, chemical and metallurgical processes, glass production and many other products.

Labor History and Industrial Relations: A Symposium.

ERIC Educational Resources Information Center

Salvatore, Nick; And Others

1989-01-01

Includes "Labor History, Industrial Relations, and the Crisis of American Labor" (Brody); "Reckoning with Company Unions: The Case of Thompson Products, 1934-1964" (Jacoby); "Managers and Nonunion Workers in the Rubber Industry: Union Avoidance Strategies in the 1930s" (Nelson); and "'Light Manufacturing': The…

The Nation's top 25 construction aggregates producers

USGS Publications Warehouse

Willett, Jason Christopher

2013-01-01

U.S. production of construction aggregates in 2011 was 2.17 billion short tons, valued at $17.2 billion, free on board (f.o.b.) at plant. Construction aggregates production decreased by 37 percent, and the associated value decreased by 25 percent, compared with the record highs reported in 2006. In 2011, construction aggregates production increased for the first time since 2006, owing to a very slight increase in the production of both construction sand and gravel and crushed stone. The average unit value, which is the f.o.b. at plant price of a ton of material, increased slightly, but is still less than the average unit value of two years prior.

MAJOR AGRICULTURAL MIGRANT LABOR DEMAND AREAS.

ERIC Educational Resources Information Center

Department of Labor, Washington, DC.

DEPICTED ARE 12 CHARTS OF MAJOR CROP PRODUCTION CENTERS IN THE UNITED STATES WHICH DEMAND THE LABOR OF MIGRATORY FARM WORKERS THROUGHOUT THE YEAR. EACH CHART ILLUSTRATES THE AREAS OF AGRICULTURAL MIGRANT LABOR DEMAND FOR ONE MONTH OF THE YEAR. THE PURPOSE IS TO ACQUAINT THE PUBLIC WITH THE COMPLEXITY OF PLACING AND SCHEDULING MIGRATORY WORKERS…

Statistical aspects of modeling the labor curve.

PubMed

Zhang, Jun; Troendle, James; Grantz, Katherine L; Reddy, Uma M

2015-06-01

In a recent review by Cohen and Friedman, several statistical questions on modeling labor curves were raised. This article illustrates that asking data to fit a preconceived model or letting a sufficiently flexible model fit observed data is the main difference in principles of statistical modeling between the original Friedman curve and our average labor curve. An evidence-based approach to construct a labor curve and establish normal values should allow the statistical model to fit observed data. In addition, the presence of the deceleration phase in the active phase of an average labor curve was questioned. Forcing a deceleration phase to be part of the labor curve may have artificially raised the speed of progression in the active phase with a particularly large impact on earlier labor between 4 and 6 cm. Finally, any labor curve is illustrative and may not be instructive in managing labor because of variations in individual labor pattern and large errors in measuring cervical dilation. With the tools commonly available, it may be more productive to establish a new partogram that takes the physiology of labor and contemporary obstetric population into account. Copyright © 2015 Elsevier Inc. All rights reserved.

Properties of Concrete with Tire Derived Aggregate Partially Replacing Coarse Aggregates.

PubMed

Siringi, Gideon; Abolmaali, Ali; Aswath, Pranesh B

2015-01-01

Tire derived aggregate (TDA) has been proposed as a possible lightweight replacement for mineral aggregate in concrete. The role played by the amount of TDA replacing coarse aggregate as well as different treatment and additives in concrete on its properties is examined. Conventional concrete (without TDA) and concrete containing TDA are compared by examining their compressive strength based on ASTM C39, workability based on ASTM C143, splitting tensile strength based on ASTM C496, modulus of rupture (flexural strength) based on ASTM C78, and bond stress based on ASTM C234. Results indicate that while replacement of coarse aggregates with TDA results in reduction in strength, it may be mitigated with addition of silica fume to obtain the desired strength. The greatest benefit of using TDA is in the development of a higher ductile product while utilizing recycled TDA.

Comparative environmental assessment of natural and recycled aggregate concrete.

PubMed

Marinković, S; Radonjanin, V; Malešev, M; Ignjatović, I

2010-11-01

Constant and rapid increase in construction and demolition (C&D) waste generation and consumption of natural aggregate for concrete production became one of the biggest environmental problems in the construction industry. Recycling of C&D waste represents one way to convert a waste product into a resource but the environment benefits through energy consumption, emissions and fallouts reductions are not certain. The main purpose of this study is to determine the potentials of recycled aggregate concrete (concrete made with recycled concrete aggregate) for structural applications and to compare the environmental impact of the production of two types of ready-mixed concrete: natural aggregate concrete (NAC) made entirely with river aggregate and recycled aggregate concrete (RAC) made with natural fine and recycled coarse aggregate. Based on the analysis of up-to-date experimental evidence, including own tests results, it is concluded that utilization of RAC for low-to-middle strength structural concrete and non-aggressive exposure conditions is technically feasible. The Life Cycle Assessment (LCA) is performed for raw material extraction and material production part of the concrete life cycle including transport. Assessment is based on local LCI data and on typical conditions in Serbia. Results of this specific case study show that impacts of aggregate and cement production phases are slightly larger for RAC than for NAC but the total environmental impacts depend on the natural and recycled aggregates transport distances and on transport types. Limit natural aggregate transport distances above which the environmental impacts of RAC can be equal or even lower than the impacts of NAC are calculated for the specific case study. Copyright © 2010 Elsevier Ltd. All rights reserved.

Study of labor-negotiation productivity concerns in the petroleum-refining industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, J.E.

The primary objective of this study was to identify productivity factors relative to negotiating future labor contracts with the Oil, Chemical and Atomic Workers International Union (OCAWIU). A Delphi research method was utilized to accomplish this purpose. The study utilized three rounds to obtain the stated objectives. Round one involved the use of an open instrument to solicit productivity factors that would be beneficial in future negotiations with the OCAWIU. In round two, two separate instruments were sent to the panel members who were asked to judge the value of each item on the first instrument, and to rank themore » ten most significant items on the second. The round three instruments were individualized for each panel member. The productivity items were rated by the panel members, and descriptive statistics were used to describe the combined order of listings and weights for determining the relative importance of each factor in the consensus model. The nonparametric statistics were used to examine the degree of consensus between the mean values on the first instrument with the ranked values for the second instrument. No significant differences were formed. Twenty-five productivity items were identified and prioritized as viable negotiable items with the OCAWIU.« less

A comparative study on carbon footprint of rice production between household and aggregated farms from Jiangxi, China.

PubMed

Yan, Ming; Luo, Ting; Bian, Rongjun; Cheng, Kun; Pan, Genxing; Rees, Robert

2015-06-01

Quantifying the carbon footprint (CF) for crop production can help identify key options to mitigate greenhouse gas (GHG) emissions in agriculture. In the present study, both household and aggregated farm scales were surveyed to obtain the data of rice production and farming management practices in a typical rice cultivation area of Northern Jiangxi, China. The CFs of the different rice systems including early rice, late rice, and single rice under household and aggregated farm scale were calculated. In general, early rice had the lower CF in terms of land use and grain production being 4.54 ± 0.44 t CO2-eq./ha and 0.62 ± 0.1 t CO2-eq./t grain than single rice (6.84 ± 0.79 t CO2-eq./ha and 0.80 ± 0.13 t CO2-eq./t grain) and late rice (8.72 ± 0.54 t CO2-eq./ha and 1.1 ± 0.17 t CO2-eq./t grain). The emissions from nitrogen fertilizer use accounted for 33 % of the total CF on average and the direct CH4 emissions for 57 %. The results indicated that the CF of double rice cropping under aggregated farm being 0.86 ± 0.11 t CO2-eq./t grain was lower by 25 % than that being 1.14 ± 0.25 t CO2-eq./t grain under household farm, mainly due to high nitrogen use efficiency and low methane emissions. Therefore, developing the aggregated farm scale with efficient use of agro-chemicals and farming operation for greater profitability could offer a strategy for reducing GHG emissions in China's agriculture.

Effects of Heat Stress on Construction Labor Productivity in Hong Kong: A Case Study of Rebar Workers.

PubMed

Yi, Wen; Chan, Albert P C

2017-09-12

Global warming is bringing more frequent and severe heat waves, and the result will be serious for vulnerable populations such as construction workers. Excessive heat stress has profound effects on physiological responses, which cause occupational injuries, fatalities and low productivity. Construction workers are particularly affected by heat stress, because of the body heat production caused by physically demanding tasks, and hot and humid working conditions. Field studies were conducted between August and September 2016 at two construction training grounds in Hong Kong. Onsite wet-bulb globe temperature (WBGT), workers' heart rate (HR), and labor productivity were measured and monitored. Based on the 378 data sets of synchronized environmental, physiological, construction labor productivity (CLP), and personal variables, a CLP-heat stress model was established. It was found that WBGT, percentage of maximum HR, age, work duration, and alcohol drinking habits were determining factors for predicting the CLP (adjusted R ² = 0.68, p < 0.05). The model revealed that heat stress reduces CLP, with the percentage of direct work time decreasing by 0.33% when the WBGT increased by 1 °C. The findings in this study extend the existing practice notes by providing scientific data that may be of benefit to the industry in producing solid guidelines for working in hot weather.

Effects of Heat Stress on Construction Labor Productivity in Hong Kong: A Case Study of Rebar Workers

PubMed Central

Chan, Albert P. C.

2017-01-01

Global warming is bringing more frequent and severe heat waves, and the result will be serious for vulnerable populations such as construction workers. Excessive heat stress has profound effects on physiological responses, which cause occupational injuries, fatalities and low productivity. Construction workers are particularly affected by heat stress, because of the body heat production caused by physically demanding tasks, and hot and humid working conditions. Field studies were conducted between August and September 2016 at two construction training grounds in Hong Kong. Onsite wet-bulb globe temperature (WBGT), workers’ heart rate (HR), and labor productivity were measured and monitored. Based on the 378 data sets of synchronized environmental, physiological, construction labor productivity (CLP), and personal variables, a CLP-heat stress model was established. It was found that WBGT, percentage of maximum HR, age, work duration, and alcohol drinking habits were determining factors for predicting the CLP (adjusted R2 = 0.68, p < 0.05). The model revealed that heat stress reduces CLP, with the percentage of direct work time decreasing by 0.33% when the WBGT increased by 1 °C. The findings in this study extend the existing practice notes by providing scientific data that may be of benefit to the industry in producing solid guidelines for working in hot weather. PMID:28895899

Investigation of Physico-Chemical Properties of Sand-Lime Products Modified of Diabase Aggregate and Chalcedonite Meal

NASA Astrophysics Data System (ADS)

Dachowski, Ryszard; Komisarczyk, Katarzyna

2017-10-01

In the era of rapid development in the construction industry, particular attention is focused on harmless and natural materials. Some of the best materials for building masonry walls are sand-lime products. Silicates are obtained from a mixture of quartz, sand and a small amount of water. They emerge as a result of the hydrothermal treatment conducted under high pressure and at a temperature of app. 203 °C. Silicates were modified of different kinds of aggregates, glass or plastics, and the content of dry ingredients was changed because of this fact. The paper describes the studies where the combination of diabase aggregate and chalcedonite meal was used. Microstructure of the products was analyzed with the use of mercury intrusion porosimetry, SEM and XRD methods. Variable content of chalcedonite meal changes the internal structure and the physico-chemical properties.

Properties of Concrete with Tire Derived Aggregate Partially Replacing Coarse Aggregates

PubMed Central

Siringi, Gideon; Abolmaali, Ali; Aswath, Pranesh B.

2015-01-01

Tire derived aggregate (TDA) has been proposed as a possible lightweight replacement for mineral aggregate in concrete. The role played by the amount of TDA replacing coarse aggregate as well as different treatment and additives in concrete on its properties is examined. Conventional concrete (without TDA) and concrete containing TDA are compared by examining their compressive strength based on ASTM C39, workability based on ASTM C143, splitting tensile strength based on ASTM C496, modulus of rupture (flexural strength) based on ASTM C78, and bond stress based on ASTM C234. Results indicate that while replacement of coarse aggregates with TDA results in reduction in strength, it may be mitigated with addition of silica fume to obtain the desired strength. The greatest benefit of using TDA is in the development of a higher ductile product while utilizing recycled TDA. PMID:26161440

The nation’s top 25 construction aggregates producers

USGS Publications Warehouse

Willett, Jason C.

2014-01-01

U.S. production of construction aggregates in 2012 was 2.18 billion short tons valued at $17.6 billion, free on board (f.o.b.) at plant. In 2012, construction aggregates production remained virtually unchanged from the levels of the last two years because of a very slight increase compared with that of 2011 in the production of both construction sand and gravel and crushed stone. The average unit value, which is the f.o.b. at the plant price of a metric ton of material, increased slightly. Construction aggregates production was 36 percent less than and the associated value was 23 percent less than the record highs reported in 2006.

Hsp90 activator Aha1 drives production of pathological tau aggregates

PubMed Central

Shelton, Lindsey B.; Baker, Jeremy D.; Zheng, Dali; Sullivan, Leia E.; Solanki, Parth K.; Webster, Jack M.; Sun, Zheying; Sabbagh, Jonathan J.; Nordhues, Bryce A.; Koren, John; Ghosh, Suman; Blagg, Brian S. J.; Dickey, Chad A.

2017-01-01

The microtubule-associated protein tau (MAPT, tau) forms neurotoxic aggregates that promote cognitive deficits in tauopathies, the most common of which is Alzheimer’s disease (AD). The 90-kDa heat shock protein (Hsp90) chaperone system affects the accumulation of these toxic tau species, which can be modulated with Hsp90 inhibitors. However, many Hsp90 inhibitors are not blood–brain barrier-permeable, and several present associated toxicities. Here, we find that the cochaperone, activator of Hsp90 ATPase homolog 1 (Aha1), dramatically increased the production of aggregated tau. Treatment with an Aha1 inhibitor, KU-177, dramatically reduced the accumulation of insoluble tau. Aha1 colocalized with tau pathology in human brain tissue, and this association positively correlated with AD progression. Aha1 overexpression in the rTg4510 tau transgenic mouse model promoted insoluble and oligomeric tau accumulation leading to a physiological deficit in cognitive function. Overall, these data demonstrate that Aha1 contributes to tau fibril formation and neurotoxicity through Hsp90. This suggests that therapeutics targeting Aha1 may reduce toxic tau oligomers and slow or prevent neurodegenerative disease progression. PMID:28827321

Preparing skilled labor in industry through production-based curriculum approach in vocational high school

NASA Astrophysics Data System (ADS)

Yoto

2017-09-01

Vocational high school (Sekolah Menengah Kejuruan / SMK) aims to prepare mid-level skilled labors to work in the industry and are able to create self-employment opportunities. For those reasons, the curriculum in SMK should be based on meeting the needs of the industries and is able to prepare learners to master the competence in accordance with the skills program of their choice. Production based curriculum is the curriculum which the learning process is designed together with the production process or using production process as a learning medium. This approach with the primary intention to introduce students with the real working environment and not merely simulations. In the production-based curriculum implementation model, students are directly involved in the industry through the implementation of industrial working practices, do work on production units in school, and do practical work in school by doing the job as done in the industry by using industry standards machines.

Characterizing harmful advanced glycation end-products (AGEs) and ribosylated aggregates of yellow mustard seed phytocystatin: Effects of different monosaccharides

NASA Astrophysics Data System (ADS)

Ahmed, Azaj; Shamsi, Anas; Bano, Bilqees

2017-01-01

Advanced glycation end products (AGEs) are at the core of variety of diseases ranging from diabetes to renal failure and hence gaining wide consideration. This study was aimed at characterizing the AGEs of phytocystatin isolated from mustard seeds (YMP) when incubated with different monosaccharides (glucose, ribose and mannose) using fluorescence, ultraviolet, circular dichroism (CD) spectroscopy and microscopy. Ribose was found to be the most potent glycating agent as evident by AGEs specific fluorescence and absorbance. YMP exists as a molten globule like structure on day 24 as depicted by high ANS fluorescence and altered intrinsic fluorescence. Glycated YMP as AGEs and ribose induced aggregates were observed at day 28 and 32 respectively. In our study we have also examined the anti-aggregative potential of polyphenol, resveratrol. Our results suggested the anti-aggregative behavior of resveratrol as it prevented the in vitro aggregation of YMP, although further studies are required to decode the mechanism by which resveratrol prevents the aggregation.

Diatom-associated bacteria are required for aggregation of Thalassiosira weissflogii

PubMed Central

Gärdes, Astrid; Iversen, Morten H; Grossart, Hans-Peter; Passow, Uta; Ullrich, Matthias S

2011-01-01

Aggregation of algae, mainly diatoms, is an important process in marine systems leading to the settling of particulate organic carbon predominantly in the form of marine snow. Exudation products of phytoplankton form transparent exopolymer particles (TEP), which acts as the glue for particle aggregation. Heterotrophic bacteria interacting with phytoplankton may influence TEP formation and phytoplankton aggregation. This bacterial impact has not been explored in detail. We hypothesized that bacteria attaching to Thalassiosira weissflogii might interact in a yet-to-be determined manner, which could impact TEP formation and aggregate abundance. The role of individual T. weissflogii-attaching and free-living new bacterial isolates for TEP production and diatom aggregation was investigated in vitro. T. weissflogii did not aggregate in axenic culture, and striking differences in aggregation dynamics and TEP abundance were observed when diatom cultures were inoculated with either diatom-attaching or free-living bacteria. The data indicated that free-living bacteria might not influence aggregation whereas bacteria attaching to diatom cells may increase aggregate formation. Interestingly, photosynthetically inactivated T. weissflogii cells did not aggregate regardless of the presence of bacteria. Comparison of aggregate formation, TEP production, aggregate sinking velocity and solid hydrated density revealed remarkable differences. Both, photosynthetically active T. weissflogii and specific diatom-attaching bacteria were required for aggregation. It was concluded that interactions between heterotrophic bacteria and diatoms increased aggregate formation and particle sinking and thus may enhance the efficiency of the biological pump. PMID:20827289

Collective Bargaining and Labor-Management Relations in 1988.

ERIC Educational Resources Information Center

Ruben, George

1989-01-01

Reviews labor contracts renegotiated during 1988, placing emphasis on labor-management relations. Provides information on negotiations in the following industries: (1) trucking, (2) air transportation, (3) automobile manufacturing, (4) steel and other metals, (5) rubber, (6) bituminous coal, (7) forest products, and (8) shipbuilding. Covers…

Active motility in bimodular bacterial aggregates

NASA Astrophysics Data System (ADS)

Zeng, Yu; Liu, Bin

2017-11-01

Dispersal capability is essential for microorganisms to achieve long-distance translocation, thus crucial for their abundance in various environments. In general, active dispersals are attributed to the movements of self-powered planktonic cells, while sessile cells that live a colonial life often disperse passively through flow entrainments. Here, we report another means of active dispersal employed by aggregates of sessile cells. The spherical rosette colonies of the bacterium Caulobacter crescentus are aggregates of sessile stalked cells, of which a small proportion undergo cell division, grow active flagella and effect whole-rosette motility. We show that these rosettes actively disperse both in bulk water and near the solid-liquid interface. In particular, the proximity of a self-powered rosette to the solid surface promotes a rolling movement, leading to its persistent transportation along the solid boundary. The active dispersal of these rosettes demonstrated a novel mode of colonial transportation that is based on the division of labor between sessile and motile cells. The authors thank the support of National Science Foundation CREST: Center for Cellular and Biomolecular Machines at UC Merced (NSF-HRD-1547848).

Effect of mineral trioxide aggregate on cytokine production by peritoneal macrophages.

PubMed

Rezende, T M B; Vargas, D L; Cardoso, F P; Sobrinho, A P R; Vieira, L Q

2005-12-01

To test the effect of two commercial brands of grey mineral trioxide aggregate (ProRoot and MTA-Angelus) on cytokine production by M1 and M2 inflammatory macrophages. M1 (from C57BL/6 mice) and M2 peritoneal inflammatory macrophages (from C57BL/6 IL12p40-/- mice) were obtained and cultured in vitro in the presence of MTA. The cellular viability and the production of tumour necrosis factor-alpha, interleukin (IL)-12 and IL-10 in response to stimulation with interferon-gamma and Fusobacterium nucleatum or Peptostreptococcus anaerobius were evaluated. Data were analysed by Mann-Whitney, Kruskal-Wallis and anova tests. The cements did not interfere with cellular viability or with cytokine production by either type of macrophage. However, M2 macrophages produced higher levels of IL-10 when stimulated with F. nucleatum than M1 macrophages (P < 0.05). The brands of MTA evaluated did not interfere in the cytokine response by M1 or M2 macrophages to the two bacteria tested. However, a difference in cytokine production between the two types of macrophages was found.

Migrant labor supply in a booming non-renewable resource economy: Cure and transmission mechanism for de-industrialization?

NASA Astrophysics Data System (ADS)

Nulle, Grant Mark

This paper challenges the determinism that booming resource economies suffer from de-industrialization, the "Dutch Disease". For several decades, economists have attempted to explain how a sudden surge in mineral and energy extraction affects an economy's output and employment from an aggregate and sectoral perspective. Economic theory shows that a "boom" in mineral and energy production is welfare enhancing to the economy experiencing it. However, the phenomenon also induces inter-sectoral adjustments among non-renewable resource (NRR), traditional traded, and non-traded industries that tend to crowd out traditional export sectors such as agriculture and manufacturing. In turn, this paper asks two fundamental questions: 1) Can the inter-sectoral adjustments wrought by a boom in NRR production be mitigated in the resource-abundant economy experiencing it; 2) Can the inter-sectoral adjustments be exported to a neighboring non-resource economy by movements in migrant labor supply? The theoretical model and empirical estimation approach presented in this paper introduces an endogenous migrant labor supply response to booms in NRR output to test the extent traditional tradable sectors shrink in the NRR-abundant economy during the boom and if such effects are exported to a neighboring jurisdiction. Using data at the U.S. county level, the empirical results show that booming economies experience positive and statistically significant rates of real income and traded sector job growth during the boom, attributable to the influx of migrant labor. By contrast, little evidence is found that non-booming counties adjacent to the booming counties experience declines in income or job growth because of labor supply outflows. Instead, the results suggest the larger the number of potential "donor" counties that can supply labor to the booming economies, the more likely the transmission of booming economy effects, namely evidence of de-industrialization, is diffused across all of the

Quantitative risk assessment of the aggregate dermal exposure to the sensitizing fragrance geraniol in personal care products and household cleaning agents.

PubMed

Nijkamp, M M; Bokkers, B G H; Bakker, M I; Ezendam, J; Delmaar, J E

2015-10-01

A quantitative risk assessment was performed to establish if consumers are at risk for being dermally sensitized by the fragrance geraniol. Aggregate dermal exposure to geraniol was estimated using the Probabilistic Aggregate Consumer Exposure Model, containing data on the use of personal care products and household cleaning agents. Consumer exposure to geraniol via personal care products appeared to be higher than via household cleaning agents. The hands were the body parts receiving the highest exposure to geraniol. Dermal sensitization studies were assessed to derive the point of departure needed for the estimation of the Acceptable Exposure Level (AEL). Two concentrations were derived, one based on human studies and the other from dose-response analysis of the available murine local lymph node assay data. The aggregate dermal exposure assessment resulted in body part specific median exposures up to 0.041 μg/cm(2) (highest exposure 102 μg/cm(2)) for hands. Comparing the exposure to the lowest AEL (55 μg/cm(2)), shows that a range of 0.02-0.86% of the population may have an aggregated exposure which exceeds the AEL. Furthermore, it is demonstrated that personal care products contribute more to the consumer's geraniol exposure compared to household cleaning agents. Copyright © 2015 Elsevier Inc. All rights reserved.

Spatial and Temporal Uncertainty of Crop Yield Aggregations

NASA Technical Reports Server (NTRS)

Porwollik, Vera; Mueller, Christoph; Elliott, Joshua; Chryssanthacopoulos, James; Iizumi, Toshichika; Ray, Deepak K.; Ruane, Alex C.; Arneth, Almut; Balkovic, Juraj; Ciais, Philippe;

Benefits of aggregates surface modification in concrete production

NASA Astrophysics Data System (ADS)

Junak, J.; Sicakova, A.

2017-10-01

In our study, recycled concrete aggregates (RCA), which surfaces had been modified by geopolymer material based on coal fly ash, were used to produce the concrete samples. In these samples, fraction 4/8 mm was replaced by recycled concrete aggregate with a range of 100%. To modify the surface of RCA was “Solo” and “Triple stage” modification used. On these samples real density, total water absorption and compressive strength were examined after 28, 90, 180 and 365 days of hardening. The highest compressive strength 56.8 MPa, after 365 days hardening, reached sample which had improved RCA surface by “Triple stage mixing”.

Gut bacteria mediate aggregation in the German cockroach

PubMed Central

Wada-Katsumata, Ayako; Zurek, Ludek; Nalyanya, Godfrey; Roelofs, Wendell L.; Zhang, Aijun; Schal, Coby

2015-01-01

Aggregation of the German cockroach, Blattella germanica, is regulated by fecal aggregation agents (pheromones), including volatile carboxylic acids (VCAs). We demonstrate that the gut microbial community contributes to production of these semiochemicals. Chemical analysis of the fecal extract of B. germanica revealed 40 VCAs. Feces from axenic cockroaches (no microorganisms in the alimentary tract) lacked 12 major fecal VCAs, and 24 of the remaining compounds were represented at extremely low amounts. Olfactory and aggregation bioassays demonstrated that nymphs strongly preferred the extract of control feces over the fecal extract of axenic cockroaches. Additionally, nymphs preferred a synthetic blend of 6 fecal VCAs over a solvent control or a previously identified VCA blend. To test whether gut bacteria contribute to the production of fecal aggregation agents, fecal aerobic bacteria were cultured, isolated, and identified. Inoculation of axenic cockroaches with individual bacterial taxa significantly rescued the aggregation response to the fecal extract, and inoculation with a mix of six bacterial isolates was more effective than with single isolates. The results indicate that the commensal gut microbiota contributes to production of VCAs that act as fecal aggregation agents and that cockroaches discriminate among the complex odors that emanate from a diverse microbial community. Our results highlight the pivotal role of gut bacteria in mediating insect–insect communication. Moreover, because the gut microbial community reflects the local environment, local plasticity in fecal aggregation pheromones enables colony-specific odors and fidelity to persistent aggregation sites. PMID:26644557

New Mexico aggregate production sites, 1997-1999

USGS Publications Warehouse

Orris, Greta J.

2000-01-01

This report presents data, including latitude and longitude, for aggregate sites in New Mexico that were believed to be active in the period 1997-1999. The data are presented in paper form in Part A of this report and as Microsoft Excel 97 and Data Interchange Format (DIF) files in Part B. The work was undertaken as part of the effort to update information for the National Atlas. This compilation includes data from: the files of U.S. Geological Survey (USGS); company contacts; the New Mexico Bureau of Mines and Mineral Resources, New Mexico Bureau of Mine Inspection, and the Mining and Minerals Division of the New Mexico Energy, Minerals and Natural Resources Department (Hatton and others, 1998); the Bureau of Land Management Information; and direct communications with some of the aggregate operators. Additional information on most of the sites is available in Hatton and others (1998).

The effect of hyperactive bladder severity on healthcare utilization and labor productivity.

PubMed

Angulo, J C; Brenes, F J; Ochayta, D; Lizarraga, I; Arumí, D; Trillo, S; Rejas, J

2014-05-01

To explore the relationship between the severity of urinary urge incontinence (UUI) on healthcare resources utilization (HRU) and loss of labor productivity of subjects with overactive bladder (OAB) in the general population in Spain. Secondary analysis of a cross-sectional web-based study conducted in the general population >18 years, through a battery of HRU questions asked using an online method. Probable OAB subjects were identified using a previously validated algorithm and a score >8 in the OAB-V8 questionnaire. HRU questions included an assessment of concomitant medication used as a consequence of OAB/UUI, pad utilization, and medical office visits. Patients were grouped according to the number of UUI episodes into 0, 1, 2-3 or 4+ episodes. Of a total of 2,035 subjects participating from the general population, 396 patients [52.5% women, mean age: 55.3 (11.1) years, OAB-V8 mean score: 14.5 (7.9)] were analyzed; 203 (51.3%) with 0 episodes, 119 (30.1%) with 1, 52 (13.1%) with 2 or 3, and 22 (5.6%) with 4 or more episodes. A linear and significant adjusted association was observed between the number of UUI episodes and HRU; the higher the number of daily episodes the higher the HRU. Subjects with more episodes had medical visits more frequently at the primary care (P = .001) and specialist (P = .009) level as well. Consumption of day (P < .001) and night (P < .001) urinary absorbents, anxiolytic medicines (P = .021) and antibiotics (P = .05) was higher in patients with more UUI episodes. The severity of OAB in terms of frequency of daily urge incontinence episodes was significantly and linearly associated with higher healthcare resources utilization and a decrease in labor productivity in subjects with probable OAB in Spain. Copyright © 2013 AEU. Published by Elsevier Espana. All rights reserved.

Characterizing harmful advanced glycation end-products (AGEs) and ribosylated aggregates of yellow mustard seed phytocystatin: Effects of different monosaccharides.

PubMed

Ahmed, Azaj; Shamsi, Anas; Bano, Bilqees

2017-01-15

Advanced glycation end products (AGEs) are at the core of variety of diseases ranging from diabetes to renal failure and hence gaining wide consideration. This study was aimed at characterizing the AGEs of phytocystatin isolated from mustard seeds (YMP) when incubated with different monosaccharides (glucose, ribose and mannose) using fluorescence, ultraviolet, circular dichroism (CD) spectroscopy and microscopy. Ribose was found to be the most potent glycating agent as evident by AGEs specific fluorescence and absorbance. YMP exists as a molten globule like structure on day 24 as depicted by high ANS fluorescence and altered intrinsic fluorescence. Glycated YMP as AGEs and ribose induced aggregates were observed at day 28 and 32 respectively. In our study we have also examined the anti-aggregative potential of polyphenol, resveratrol. Our results suggested the anti-aggregative behavior of resveratrol as it prevented the in vitro aggregation of YMP, although further studies are required to decode the mechanism by which resveratrol prevents the aggregation. Copyright © 2016 Elsevier B.V. All rights reserved.

Designing cross-linked xylanase aggregates for bioconversion of agroindustrial waste biomass towards potential production of nutraceuticals.

PubMed

Hero, J S; Romero, C M; Pisa, J H; Perotti, N I; Olivaro, C; Martinez, M A

2018-05-01

Immobilized biocatalysts design has the potential to efficiently produce valuable bioproducts from lignocellulosic biomass. Among them, the carrier-free immobilization through the cross-linked enzyme aggregates technology is a simple and low-cost alternative. A two steps statistical approach was utilized to evaluate the synthesis of a cross-linked enzyme aggregate from a xylanolytic preparation, which was produced by Cohnella sp. AR92 grown in a peptone-based culture medium. The resulting immobilized biocatalyst, Xyl-CLEA, was significate more stable (25 to 45%) towards temperatures up to 50°C with respect to the free enzyme, and retained over 50% of its initial activity after 5 consecutive cycles of reuse. By means of infrared spectroscopy and electron microscopy, the Xyl-CLEA showed architectural features described as signature of type I and type II of protein aggregates. These, were the result of the simultaneous aggregation of a multiplicity of proteins from the crude enzymatic extract. The enzymatic activity was assessed using alkali pretreated sugar cane bagasse as substrate. Whereas the free enzymatic preparation released xylose as the main product, the immobilized xylanase produced xylooligosaccharides, thus showing that the immobilization procedure modified the potential application of the extracellular xylanase from Conhella sp. AR92. Copyright © 2018 Elsevier B.V. All rights reserved.

Productivity or discrimination? An economic analysis of excess-weight penalty in the Swedish labor market.

PubMed

Dackehag, Margareta; Gerdtham, Ulf-G; Nordin, Martin

2015-07-01

This article investigates the excess-weight penalty in income for men and women in the Swedish labor market, using longitudinal data. It compares two identification strategies, OLS and individual fixed effects, and distinguishes between two main sources of excess-weight penalties, lower productivity because of bad health and discrimination. For men, the analysis finds a significant obesity penalty related to discrimination when applying individual fixed effects. We do not find any significant excess-weight penalty for women.

What's Happening in the Labor Market for Recent Science and Engineering Ph.D. Recipients?

ERIC Educational Resources Information Center

Regets, Mark

1997-01-01

Aggregate measures of labor market conditions for recent science and engineering Ph.D. recipients changed only slightly between April 1993 and April 1995. The unemployment rate for all recent Ph.D.s rose from 1.7% in 1993 to 1.9% in 1995. The rate of recent Ph.D.s involuntarily working outside the field of their degree similarly rose slightly from…

Entrapment of Aβ1-40 peptide in unstructured aggregates

NASA Astrophysics Data System (ADS)

Corsale, C.; Carrotta, R.; Mangione, M. R.; Vilasi, S.; Provenzano, A.; Cavallaro, G.; Bulone, D.; San Biagio, P. L.

2012-06-01

Recognizing the complexity of the fibrillogenesis process provides a solid ground for the development of therapeutic strategies aimed at preventing or inhibiting protein-protein aggregation. Under this perspective, it is meaningful to identify the possible aggregation pathways and their relative products. We found that Aβ-peptide dissolved in a pH 7.4 solution at small peptide concentration and low ionic strength forms globular aggregates without typical amyloid β-conformation. ThT binding kinetics was used to monitor aggregate formation. Circular dichroism spectroscopy, AFM imaging, static and dynamic light scattering were used for structural and morphological characterization of the aggregates. They appear stable or at least metastable with respect to fiber growth, therefore appearing as an incidental product in the pathway of fibrillogenesis.

';Best' Practices for Aggregating Subset Results from Archived Datasets

NASA Astrophysics Data System (ADS)

Baskin, W. E.; Perez, J.

2013-12-01

In response to the exponential growth in science data analysis and visualization capabilities Data Centers have been developing new delivery mechanisms to package and deliver large volumes of aggregated subsets of archived data. New standards are evolving to help data providers and application programmers deal with growing needs of the science community. These standards evolve from the best practices gleaned from new products and capabilities. The NASA Atmospheric Sciences Data Center (ASDC) has developed and deployed production provider-specific search and subset web applications for the CALIPSO, CERES, TES, and MOPITT missions. This presentation explores several use cases that leverage aggregated subset results and examines the standards and formats ASDC developers applied to the delivered files as well as the implementation strategies for subsetting and processing the aggregated products. The following topics will be addressed: - Applications of NetCDF CF conventions to aggregated level 2 satellite subsets - Data-Provider-Specific format requirements vs. generalized standards - Organization of the file structure of aggregated NetCDF subset output - Global Attributes of individual subsetted files vs. aggregated results - Specific applications and framework used for subsetting and delivering derivative data files

Amyloid-beta aggregation: selective inhibition of aggregation in mixtures of amyloid with different chain lengths.

PubMed Central

Snyder, S W; Ladror, U S; Wade, W S; Wang, G T; Barrett, L W; Matayoshi, E D; Huffaker, H J; Krafft, G A; Holzman, T F

1994-01-01

One of the clinical manifestations of Alzheimer's disease is the deposition of the 39-43 residue amyloid-beta (A beta) peptide in aggregated fibrils in senile plaques. Characterization of the aggregation behavior of A beta is one of the critical issues in understanding the role of A beta in the disease process. Using solution hydrodynamics, A beta was observed to form three types of species in phosphate-buffered saline: insoluble aggregates with sedimentation coefficients of approximately 50,000 S and molecular masses of approximately 10(9) Da, "soluble aggregates" with sedimentation coefficients of approximately 30 S and masses of approximately 10(6) Da, and monomer. When starting from monomer, the aggregation kinetics of A beta 1-40 (A beta 40) and A beta 1-42 (A beta 42), alone and in combination, reveal large differences in the tendency of these peptides to aggregate as a function of pH and other solution conditions. At pH 4.1 and 7.0-7.4, aggregation is significantly slower than at pH 5 and 6. Under all conditions, aggregation of the longer A beta 42 was more rapid than A beta 40. Oxidation of Met-35 to the sulfoxide in A beta 40 enhances the aggregation rate over that of the nonoxidized peptide. Aggregation was found to be dependent upon temperature and to be strongly dependent on peptide concentration and ionic strength, indicating that aggregation is driven by a hydrophobic effect. When A beta 40 and A beta 42 are mixed together, A beta 40 retards the aggregation of A beta 42 in a concentration-dependent manner. Shorter fragments have a decreasing ability to interfere with A beta 42 aggregation. Conversely, the rate of aggregation of A beta 40 can be significantly enhanced by seeding slow aggregating solutions with preformed aggregates of A beta 42. Taken together, the inhibition of A beta 42 aggregation by A beta 40, the seeding of A beta 40 aggregation by A beta 42 aggregates, and the chemical oxidation of A beta 40 suggest that the relative abundance and

Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milton Wu; Paul Yuran

2006-12-31

Universal Aggregates LLC (UA) was awarded a cost sharing Co-operative Agreement from the Department of Energy (DOE) through the Power Plant Improvement Initiative Program (PPII) to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia in October 2001. The Agreement was signed in November 2002. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the UA share is $12.3 million (63%). The original project team consists of UA, SynAggs, LLC, CONSOL Energy Inc. and P. J. Dick, Inc. Usingmore » 115,000 ton per year of spray dryer ash (SDA), a dry FGD by-product from the power station, UA will produce 167,000 tons of manufactured lightweight aggregate for use in production of concrete masonry units (CMU). Manufacturing aggregate from FGD by-products can provide an economical high-volume use and substantially expand market for FGD by-products. Most of the FGD by-products are currently disposed of in landfills. Construction of the Birchwood Aggregate Facility was completed in March 2004. Operation startup was begun in April 2004. Plant Integration was initiated in December 2004. Integration includes mixing, extrusion, curing, crushing and screening. Lightweight aggregates with proper size gradation and bulk density were produced from the manufacturing aggregate plant and loaded on a stockpile for shipment. The shipped aggregates were used in a commercial block plant for CMU production. However, most of the production was made at low capacity factors and for a relatively short time in 2005. Several areas were identified as important factors to improve plant capacity and availability. Equipment and process control modifications and curing vessel clean up were made to improve plant operation in the first half of 2006. About 3,000 tons of crushed aggregate was produced in August 2006. UA is continuing to work to improve

Production efficiencies of U.S. electric generation plants: Effects of data aggregation and greenhouse gas and renewable energy policy

NASA Astrophysics Data System (ADS)

Lynes, Melissa Kate

Over the last few decades there has been a shift in electricity production in the U.S. Renewable energy sources are becoming more widely used. In addition, electric generation plants that use coal inputs are more heavily regulated than a couple decades ago. This shift in electricity production was brought on by changes in federal policy -- a desire for electricity produced in the U.S. which led to policies being adopted that encourage the use of renewable energy. The change in production practices due to policies may have led to changes in the productivity of electric generation plants. Multiple studies have examined the most efficient electric generation plants using the data envelopment analysis (DEA) approach. This study builds on past research to answer three questions: 1) Does the level of aggregation of fuel input variables affect the plant efficiency scores and how does the efficiency of renewable energy input compare to nonrenewable energy inputs; 2) Are policies geared toward directly or indirectly reducing greenhouse gas emissions affecting the production efficiencies of greenhouse gas emitting electric generation plants; and 3) Do renewable energy policies and the use of intermittent energy sources (i.e. wind and solar) affect the productivity growth of electric generation plants. All three analysis, presented in three essays, use U.S. plant level data obtained from the Energy Information Administration to answer these questions. The first two essays use DEA to determine the pure technical, overall technical, and scale efficiencies of electric generation plants. The third essay uses DEA within the Malmquist index to assess the change in productivity over time. Results indicate that the level of aggregation does matter particularly for scale efficiency. This implies that valuable information is likely lost when fuel inputs are aggregated together. Policies directly focused on reducing greenhouse gas emissions may improve the production efficiencies of

Does bathymetry drive coastal whale shark (Rhincodon typus) aggregations?

PubMed Central

Stewart, Bryce D.; McClean, Colin J.; Hancock, James; Rees, Richard

2018-01-01

Background The whale shark (Rhincodon typus) is known to aggregate in a number of coastal locations globally, however what causes these aggregations to form where they do is largely unknown. This study examines whether bathymetry is an important driver of coastal aggregation locations for R. typus through bathymetry’s effect on primary productivity and prey availability. This is a global study taking into account all coastal areas within R. typus’ range. Methods R. typus aggregation locations were identified through an extensive literature review. Global bathymetric data were compared at R. typus aggregation locations and a large random selection of non-aggregation areas. Generalised linear models were used to assess which bathymetric characteristic had the biggest influence on aggregation presence. Results Aggregation sites were significantly shallower than non-aggregation sites and in closer proximity to deep water (the mesopelagic zone) by two orders of magnitude. Slope at aggregation sites was significantly steeper than non-aggregation sites. These three bathymetric variables were shown to have the biggest association with aggregation sites, with up to 88% of deviation explained by the GLMs. Discussion The three key bathymetric characteristics similar at the aggregation sites are known to induce upwelling events, increase primary productivity and consequently attract numerous other filter feeding species. The location of aggregation sites in these key areas can be attributed to this increased prey availability, thought to be the main reason R. typus aggregations occur, extensively outlined in the literature. The proximity of aggregations to shallow areas such as reefs could also be an important factor why whale sharks thermoregulate after deep dives to feed. These findings increase our understanding of whale shark behaviour and may help guide the identification and conservation of further aggregation sites.

[Long-term implications of labor migration in Togo].

PubMed

De Haan, L

1986-01-01

Labor migration in Togo since 1900 is analyzed. The author examines factors affecting the demand for labor in areas of in-migration, the development of systems of production related to population growth in areas of out-migration, and state intervention. Consideration is given to both international and internal migration. The expansion of internal migration since independence is noted. (SUMMARY IN ENG)

Preterm Labor

MedlinePlus

Preterm labor is labor that starts before 37 completed weeks of pregnancy. It can lead to premature birth. Premature babies may face serious health risks. Symptoms of preterm labor include Contractions every 10 minutes or more often ...

Transportation and utilization of aggregates for road construction

NASA Astrophysics Data System (ADS)

Fladvad, Marit; Wigum, Børge Johannes; Aurstad, Joralf

2017-04-01

Road construction relies on non-renewable aggregate resources as the main construction material. Sources for high-quality aggregate resources are scattered, and requirements for aggregate quality can cause long transport distances between quarry and road construction site. In European countries, the average aggregate consumption per capita is 5 tonnes per year (European Aggregates Association, 2016), while the corresponding figure for Norway is 11 tonnes (Neeb, 2015). Half the Norwegian aggregate production (sand, gravel and crushed rock) is used for road construction. In Norway, aggregate resources have been considered abundant. However, stricter requirement for aggregate quality, and increased concern for sustainability and environmental issues have spurred focus on reduction of transport lengths through better utilization of local aggregate materials. In this research project, information about pavement design and aggregate quality requirements were gathered from a questionnaire sent to selected experts from the World Road Organization (PIARC), European Committee for Standardization (CEN), and Nordic Road Association (NVF). The gathered data was compared to identify differences and similarities for aggregate use in the participating countries. Further, the data was compared to known data from Norway regarding: - amount of aggregates required for a road structure - aggregate transport lengths and related costs A total of 18 countries participated in the survey, represented by either road authorities, research institutions, or contractors. There are large variations in practice for aggregate use among the represented countries, and the selection of countries is sufficient to illustrate a variety in pavement designs, aggregate sizes, and quality requirements for road construction. There are considerable differences in both pavement thickness and aggregate sizes used in the studied countries. Total thicknesses for pavement structures varies from 220 mm to 2400 mm

Prediction of the aggregation propensity of proteins from the primary sequence: aggregation properties of proteomes.

PubMed

Castillo, Virginia; Graña-Montes, Ricardo; Sabate, Raimon; Ventura, Salvador

2011-06-01

In the cell, protein folding into stable globular conformations is in competition with aggregation into non-functional and usually toxic structures, since the biophysical properties that promote folding also tend to favor intermolecular contacts, leading to the formation of β-sheet-enriched insoluble assemblies. The formation of protein deposits is linked to at least 20 different human disorders, ranging from dementia to diabetes. Furthermore, protein deposition inside cells represents a major obstacle for the biotechnological production of polypeptides. Importantly, the aggregation behavior of polypeptides appears to be strongly influenced by the intrinsic properties encoded in their sequences and specifically by the presence of selective short regions with high aggregation propensity. This allows computational methods to be used to analyze the aggregation properties of proteins without the previous requirement for structural information. Applications range from the identification of individual amyloidogenic regions in disease-linked polypeptides to the analysis of the aggregation properties of complete proteomes. Herein, we review these theoretical approaches and illustrate how they have become important and useful tools in understanding the molecular mechanisms underlying protein aggregation. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Impact of Fiscal Redistributive Policies on the Supply of Labor: Five Essays in Economic Theory and Program Design.

ERIC Educational Resources Information Center

Kesselman, Jonathan Rhys

Static and dynamic incentive effects of the following fiscal transfer forms are examined: income subsidy (negative income tax), wage subsidy, categorical income subsidy (work requirement), and overtime wage subsidy. Budgetary costs, aggregate labor-market impacts, and welfare effects are analyzed. A program for categorically combining wage and…

The Impact of Labor Unions on Construction Productivity.

DTIC Science & Technology

1984-01-01

been characterized by much violence and many disagreements between labor and managemert as the legal power balance between them has swung like a...Act and the Wagner Act the balance of power shifted dramatically to the unions. Union membership grew significantly as did union action to force...favor of balancing the budget, but the individual members are not willing to risk reelection, by agreeing to cuts in their district, 24

Why Should We Care about Child Labor? The Education, Labor Market, and Health Consequences of Child Labor

ERIC Educational Resources Information Center

Beegle, Kathleen; Dehejia, Rajeev; Gatti, Roberta

2009-01-01

Despite the extensive literature on the determinants of child labor, the evidence on the consequences of child labor on outcomes such as education, labor, and health is limited. We evaluate the causal effect of child labor participation among children in school on these outcomes using panel data from Vietnam and an instrumental variables strategy.…

Natural aggregates of the conterminous United States

USGS Publications Warehouse

Langer, William H.

1988-01-01

adversely when used as concrete aggregate. In areas where suitable natural aggregate is not available or accessible, it may become necessary to improve the quality of existing aggregate, to import aggregate from outside the area, or to substitute artificial aggregate for natural aggregate. In most cases, all of these alternatives add substantially to the cost of the final product. Even though an area may be blessed with an abundance of aggregate suitable for the intended purpose, existing land uses, zoning, or regulations may preclude commercial exploitation of the aggregate. This report also discusses the aggregate industry in general terms, including exploration, mining, and processing, as well as aggregate production rates. Proper long-range planning based on an understanding of the aggregate industry can help assure adequate supplies of aggregate.

Jobs and the resource curse in the sun: The effects of oil production on female labor force participation in California counties from 1980-2010

NASA Astrophysics Data System (ADS)

Zavala, Gabriel

This study aims to evaluate the relationship between oil income and the female labor force participation rate in California for the years of 1980, 1990, 2000 and 2010 using panel linear regression models. This study also aims to visualize the spatial patterns of both variables in California through Hot Spot analysis at the county level for the same years. The regression found no sign of a relationship between oil income and female labor force participation rate but did find evidence of a positive relationship between two income control variables and the female labor force participation rate. The hot spot analysis also found that female labor force participation cold spots are not spatially correlated with oil production hot spots. These findings contribute new methodologies at a finer scale to the very nuanced discussion of the resource curse in the United States.

Antiretroviral therapy, labor productivity, and sex: a longitudinal cohort study of tea pluckers in Kenya.

PubMed

Larson, Bruce A; Fox, Matthew P; Bii, Margaret; Rosen, Sydney; Rohr, Julia; Shaffer, Douglas; Sawe, Fredrick; Wasunna, Monique; Simon, Jonathon L

2013-01-02

To estimate the impact of antiretroviral therapy (ART) on labor productivity and income using detailed employment data from two large tea plantations in western Kenya for HIV-infected tea pluckers who initiated ART. Longitudinal study using primary data on key employment outcomes for a group of HIV-infected workers receiving antiretroviral therapy (ART) and workers in the general workforce. We used nearest-neighbor matching methods to estimate the impacts of HIV/AIDS and ART among 237 HIV-positive pluckers on ART (index group) over a 4-year period (2 years pre-ART and post-ART) on 4 monthly employment outcomes - days plucking tea, total kilograms (kgs) harvested, total days working, and total labor income. Outcomes for the index group were compared with those for a matched reference group from the general workforce. We observed a rapid deterioration in all four outcomes for HIV-infected individuals in the period before ART initiation and then a rapid improvement after treatment initiation. By 18-24 months after treatment initiation, the index group harvested 8% (men) and 19% (women) less tea than reference individuals. The index group earned 6% (men) and 9% (women) less income from labor than reference individuals. Women's income would have dropped further if they had not been able to offset their decline in tea plucking by spending more time on nonplucking assignments. HIV-infected workers experienced long-term income reductions before and after initiating ART. The implications of such long-term impacts in low-income countries have not been adequately addressed.

Sound production by dusky grouper Epinephelus marginatus at spawning aggregation sites.

PubMed

Bertucci, F; Lejeune, P; Payrot, J; Parmentier, E

2015-08-01

Sound production by the dusky grouper Epinephelus marginatus was monitored both in captivity and at two Mediterranean spawning sites during the summers of 2012 and 2013. The results of long-term passive acoustic recordings provide for the first time a description of the sounds produced by E. marginatus. Two types of sounds were mainly recorded and consisted of low-frequency booms that can be produced singly or in series with dominant frequencies below 100 Hz. Recordings in captivity validated these sounds as belonging to E. marginatus and suggested that they may be associated with reproductive displays usually performed during early stages of courtship behaviour. This study also allowed the identification of a third, low-frequency growl-like type of sound typically found in other grouper species. These growls were, however, not recorded in tanks and it is cautiously proposed that they are produced by E. marginatus. Acoustic signals attributed to E. marginatus were produced throughout the spawning season, with a diel pattern showing an increase before dusk, i.e., from 1900 to 2200 hours, before decreasing until the morning. The occurrence of sounds during the spawning season of this species suggests that they are probably involved in social activity occurring close to aggregation sites. Passive acoustics offer a helpful tool to monitor aggregation sites of this emblematic species in order to improve conservation efforts. © 2015 The Fisheries Society of the British Isles.

COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roy Scandrol

2003-10-01

Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregatesmore » that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create nine (9) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry FGD technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.« less

Mechanical properties of concrete containing recycled concrete aggregate (RCA) and ceramic waste as coarse aggregate replacement

NASA Astrophysics Data System (ADS)

Khalid, Faisal Sheikh; Azmi, Nurul Bazilah; Sumandi, Khairul Azwa Syafiq Mohd; Mazenan, Puteri Natasya

2017-10-01

Many construction and development activities today consume large amounts of concrete. The amount of construction waste is also increasing because of the demolition process. Much of this waste can be recycled to produce new products and increase the sustainability of construction projects. As recyclable construction wastes, concrete and ceramic can replace the natural aggregate in concrete because of their hard and strong physical properties. This research used 25%, 35%, and 45% recycled concrete aggregate (RCA) and ceramic waste as coarse aggregate in producing concrete. Several tests, such as concrete cube compression and splitting tensile tests, were also performed to determine and compare the mechanical properties of the recycled concrete with those of the normal concrete that contains 100% natural aggregate. The concrete containing 35% RCA and 35% ceramic waste showed the best properties compared with the normal concrete.

A University of a New Type: University Combines Education with Labor

ERIC Educational Resources Information Center

Chinese Education, 1973

1973-01-01

The educational program of a communist labor university in South China's Kiangsi Province is described. Classes in agriculture, forestry, accounting, animal husbandry, and farm machinery are offered on a part-work, part-study basis which combines education with productive labor. (SM)

Labor Market Participation, Returns to Education, and Male-Female Wage Differences in Peru.

ERIC Educational Resources Information Center

Khandker, Shahidur R.

Based on a human capital model, this paper uses household survey data from Peru to estimate differences between males and females in labor-market participation, productivity (measured in wages), and economic returns to education. The focus is on human capital, especially education, as a determinant of labor participation and productivity. The…

Development of long-term primary cell aggregates from Mediterranean octocorals.

PubMed

Huete-Stauffer, Carla; Valisano, Laura; Gaino, Elda; Vezzulli, Luigi; Cerrano, Carlo

2015-09-01

In lower metazoans, the aggregative properties of dissociated cells leading to in vitro stable multicellular aggregates have furnished a remarkable experimental material to carry out investigations in various research fields. One of the main expectations is to find good models for the study in vitro of the first steps of biomineralization processes. In this study, we examined five common Mediterranean gorgonians (Paramuricea clavata, Corallium rubrum, Eunicella singularis, Eunicella cavolinii, and Eunicella verrucosa) using mechanical cell aggregate production techniques. In particular, we investigated the conditions of aggregate formation, their number and survival in experimental conditions, the DNA synthesizing activity using 5'-bromo-2'-deoxyuridine (BrdU) tests, and the response to calcein addition and observed the secretion of newly formed sclerites. The BrdU tests showed that cell proliferation depends on the size of aggregates and on the presence/absence of symbiotic zooxanthellae. With epifluorescent and confocal imaging from calcein addition assays, we observed the presence of calcium ions within cells, a possible clue for prediction of sclerite formation or calcium deposition. The species-specific efficiency in production of cell aggregates is correlated to the size of polyps, showing that the higher density of polyps and their diameter correspond to higher production of cell aggregates. Regarding the long-term maintenance, we obtained the best results from E. singularis, which formed multicellular aggregates of 0.245 mm ± 0.086 mm in size and maintained symbiotic association with zooxanthellae throughout the experimental run. Formation of sclerites within aggregates opens a wide field of investigation on biomineralization, since de novo sclerites were observed around 30 d after the beginning of the experiment.

COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roy Scandrol

2003-04-01

Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregatesmore » that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create eight (8) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry flue gas desulfurization (FGD) technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.« less

Labor Force

ERIC Educational Resources Information Center

Occupational Outlook Quarterly, 2010

2010-01-01

The labor force is the number of people aged 16 or older who are either working or looking for work. It does not include active-duty military personnel or institutionalized people, such as prison inmates. Quantifying this total supply of labor is a way of determining how big the economy can get. Labor force participation rates vary significantly…

78 FR 13897 - Bureau of International Labor Affairs; Office of Trade and Labor Affairs; Labor Affairs Council...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-01

...Pursuant to Article 19.5 of the U.S.-Korea Free Trade Agreement (KORUS FTA), the International Labor Affairs Bureau (ILAB) of the U.S. Department of Labor gives notice of the public session of the meeting of the Labor Affairs Council (``Council'' or ``LAC''). The LAC public session will be held the morning of March 19, 2013. The purpose of the public session is to provide an opportunity for the Council to meet with the public to discuss matters related to the implementation of Chapter 19 (the Labor Chapter) of the KORUS FTA, including activities of the Labor Cooperation Mechanism established under Article 19.6 of the FTA.

Engineering a fibrocartilage spectrum through modulation of aggregate redifferentiation.

PubMed

Murphy, Meghan K; Masters, Taylor E; Hu, Jerry C; Athanasiou, Kyriacos A

2015-01-01

Expanded costochondral cells provide a clinically relevant cell source for engineering both fibrous and hyaline articular cartilage. Expanding chondrocytes in a monolayer results in a shift toward a proliferative, fibroblastic phenotype. Three-dimensional aggregate culture may, however, be used to recover chondrogenic matrix production. This study sought to engineer a spectrum of fibrous to hyaline neocartilage from a single cell source by varying the duration of three-dimensional culture following expansion. In third passage porcine costochondral cells, the effects of aggregate culture duration were assessed after 0, 8, 11, 14, and 21 days of aggregate culture and after 4 subsequent weeks of neocartilage formation. Varying the duration of aggregate redifferentiation generated a spectrum of fibrous to hyaline neocartilage. Within 8 days of aggregation, proliferation ceased, and collagen and glycosaminoglycan production increased, compared with monolayer cells. In self-assembled neocartilage, type II-to-I collagen ratio increased with increasing aggregate duration, yet glycosaminoglycan content varied minimally. Notably, 14 days of aggregate redifferentiation increased collagen content by 25%, tensile modulus by over 110%, and compressive moduli by over 50%, compared with tissue formed in the absence of redifferentiation. A spectrum of fibrous to hyaline cartilage was generated using a single, clinically relevant cell source, improving the translational potential of engineered cartilage.

Engineering a Fibrocartilage Spectrum Through Modulation of Aggregate Redifferentiation

PubMed Central

Murphy, Meghan K.; Masters, Taylor E.; Hu, Jerry C.; Athanasiou, Kyriacos A.

2015-01-01

Expanded costochondral cells provide a clinically relevant cell source for engineering both fibrous and hyaline articular cartilage. Expanding chondrocytes in monolayer results in a shift toward a proliferative, fibroblastic phenotype. Three-dimensional aggregate culture may, however, be used to recover chondrogenic matrix production. This study sought to engineer a spectrum of fibrous to hyaline neocartilage from a single cell source by varying the duration of three-dimensional culture following expansion. In third passage porcine costochondral cells, the effects of aggregate culture duration were assessed after 0, 8, 11, 14, and 21 days of aggregate culture and after 4 subsequent weeks of neocartilage formation. Varying the duration of aggregate redifferentiation generated a spectrum of fibrous to hyaline neocartilage. Within 8 days of aggregation, proliferation ceased, and collagen and glycosaminoglycan production increased, compared with monolayer cells. In self-assembled neocartilage, type II to I collagen ratio increased with increasing aggregate duration, yet glycosaminoglycan content varied minimally. Notably, 14 days of aggregate redifferentiation increased collagen content by 25%, tensile modulus by over 110%, and compressive moduli by over 50%, compared with tissue formed in the absence of redifferentiation. A spectrum of fibrous to hyaline cartilage was generated using a single, clinically relevant cell source, improving the translational potential of engineered cartilage. PMID:24380383

Lightweight alumina refractory aggregate. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swansiger, T.G.; Pearson, A.

1996-07-16

Objective was to develop a lightweight, high alumina refractory aggregate for use in various high performance insulating (low thermal conductivity) refractory applications (e.g., in the aluminium, glass, cement, and iron and steel industries). A new aggregate process was developed through bench and pilot-scale experiments involving extrusion of a blend of calcined and activated alumina powders and organic extrusion aids and binders. The aggregate, with a bulk density approaching 2.5 g/cc, exhibited reduced thermal conductivity and adequate fired strength compared to dense tabular aggregate. Refractory manufacturers were moderately enthusiastic over the results. Alcoa prepared an economic analysis for producing lightweight aggregate,more » based on a retrofit of this process into existing Alcoa production facilities. However, a new, competing lightweight aggregate material was developed by another company; this material (Plasmal{trademark})had a significantly more favorable cost base than the Alcoa/DOE material, due to cheap raw materials and fewer processing steps. In late 1995, Alcoa became a distributor of Plasmal. Alcoa estimated that {ge}75% of the market originally envisioned for the Alcoa/DOE aggregate would be taken by Plasmal. Hence, it was decided to terminate the contract without the full- scale demonstration.« less

Wages and Labor Management in African Manufacturing

ERIC Educational Resources Information Center

Fafchamps, Marcel; Soderbom, Mans

2006-01-01

Using matched employer-employee data from ten African countries, we examine the relationship between wages, worker supervision, and labor productivity in manufacturing. Wages increase with firm size for both production workers and supervisors. We develop a two-tier model of supervision that can account for this stylized fact and we fit the…

[Demography and labor shortage. Future challenges of labor market policy].

PubMed

Fuchs, J

2013-03-01

For demographic reasons, the German labor force will decrease dramatically and it will be much older on average. However, labor demand, especially for qualified workers, is expected to remain high. This paper focuses on the possibilities of expanding the labor force by increasing the participation rates of women and older persons. Herein, the change in the labor force is decomposed with respect to population and labor participation and, moreover, the effects of higher participation rates are simulated. The decomposition and simulation scenarios are based on data published by the Institute for Employment Research. The analysis clearly reveals that the effect of a considerably higher labor participation of women and older workers will disappear over time when the working-age population shrinks more and more. In addition, individuals who are currently unemployed or out of the labor force are not skilled enough. Since it seems difficult to get more qualified workers in the short and even in the medium term, improving the conditions for women and older people to take up jobs should be tackled soon. This includes investments in education and health care.

Labor Force

ERIC Educational Resources Information Center

Occupational Outlook Quarterly, 2012

2012-01-01

The labor force is the number of people ages 16 or older who are either working or looking for work. It does not include active-duty military personnel or the institutionalized population, such as prison inmates. Determining the size of the labor force is a way of determining how big the economy can get. The size of the labor force depends on two…

Institutions of Higher Education Under the Fair Labor Standards Act.

ERIC Educational Resources Information Center

Employment Standards Administration (DOL), Washington, DC. Wage and Hour Div.

The Fair Labor Standards Act contains provisions and standards concerning minimum wages, equal pay, maximum hours and overtime pay, recordkeeping, and child labor. These basic requirements apply to employees engaged in interstate commerce or in the production of goods for interstate commerce and also to employees in certain enterprises that are so…

Development and Application of a Structural Health Monitoring System Based on Wireless Smart Aggregates

PubMed Central

Ma, Haoyan; Li, Peng; Song, Gangbing; Wu, Jianxin

2017-01-01

Structural health monitoring (SHM) systems can improve the safety and reliability of structures, reduce maintenance costs, and extend service life. Research on concrete SHMs using piezoelectric-based smart aggregates have reached great achievements. However, the newly developed techniques have not been widely applied in practical engineering, largely due to the wiring problems associated with large-scale structural health monitoring. The cumbersome wiring requires much material and labor work, and more importantly, the associated maintenance work is also very heavy. Targeting a practical large scale concrete crack detection (CCD) application, a smart aggregates-based wireless sensor network system is proposed for the CCD application. The developed CCD system uses Zigbee 802.15.4 protocols, and is able to perform dynamic stress monitoring, structural impact capturing, and internal crack detection. The system has been experimentally validated, and the experimental results demonstrated the effectiveness of the proposed system. This work provides important support for practical CCD applications using wireless smart aggregates. PMID:28714927

Development and Application of a Structural Health Monitoring System Based on Wireless Smart Aggregates.

PubMed

Yan, Shi; Ma, Haoyan; Li, Peng; Song, Gangbing; Wu, Jianxin

2017-07-17

Structural health monitoring (SHM) systems can improve the safety and reliability of structures, reduce maintenance costs, and extend service life. Research on concrete SHMs using piezoelectric-based smart aggregates have reached great achievements. However, the newly developed techniques have not been widely applied in practical engineering, largely due to the wiring problems associated with large-scale structural health monitoring. The cumbersome wiring requires much material and labor work, and more importantly, the associated maintenance work is also very heavy. Targeting a practical large scale concrete crack detection (CCD) application, a smart aggregates-based wireless sensor network system is proposed for the CCD application. The developed CCD system uses Zigbee 802.15.4 protocols, and is able to perform dynamic stress monitoring, structural impact capturing, and internal crack detection. The system has been experimentally validated, and the experimental results demonstrated the effectiveness of the proposed system. This work provides important support for practical CCD applications using wireless smart aggregates.

Fluorescence dye-based detection of mAb aggregates in CHO culture supernatants.

PubMed

Paul, Albert Jesuran; Schwab, Karen; Prokoph, Nina; Haas, Elena; Handrick, René; Hesse, Friedemann

2015-06-01

Product yields, efficacy, and safety of monoclonal antibodies (mAbs) are reduced by the formation of higher molecular weight aggregates during upstream processing. In-process characterization of mAb aggregate formation is a challenge since there is a lack of a fast detection method to identify mAb aggregates in cell culture. In this work, we present a rapid method to characterize mAb aggregate-containing Chinese hamster ovary (CHO) cell culture supernatants. The fluorescence dyes thioflavin T (ThT) and 4-4-bis-1-phenylamino-8-naphthalene sulfonate (Bis-ANS) enabled the detection of soluble as well as large mAb aggregates. Partial least square (PLS) regression models were used to evaluate the linearity of the dye-based mAb aggregate detection in buffer down to a mAb aggregate concentration of 2.4 μg mL(-1). Furthermore, mAb aggregates were detected in bioprocess medium using Bis-ANS and ThT. Dye binding to aggregates was stable for 60 min, making the method robust and reliable. Finally, the developed method using 10 μmol L(-1) Bis-ANS enabled discrimination between CHO cell culture supernatants containing different levels of mAb aggregates. The method can be adapted for high-throughput screening, e.g., to screen for cell culture conditions influencing mAb product quality, and hence can contribute to the improvement of production processes of biopharmaceuticals in mammalian cell culture.

Physio-chemical reactions in recycle aggregate concrete.

PubMed

Tam, Vivian W Y; Gao, X F; Tam, C M; Ng, K M

2009-04-30

Concrete waste constitutes the major proportion of construction waste at about 50% of the total waste generated. An effective way to reduce concrete waste is to reuse it as recycled aggregate (RA) for the production of recycled aggregate concrete (RAC). This paper studies the physio-chemical reactions of cement paste around aggregate for normal aggregate concrete (NAC) and RAC mixed with normal mixing approach (NMA) and two-stage mixing approach (TSMA) by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Four kinds of physio-chemical reactions have been recorded from the concrete samples, including the dehydration of C(3)S(2)H(3), iron-substituted ettringite, dehydroxylation of CH and development of C(6)S(3)H at about 90 degrees C, 135 degrees C, 441 degrees C and 570 degrees C, respectively. From the DSC results, it is confirmed that the concrete samples with RA substitution have generated less amount of strength enhancement chemical products when compared to those without RA substitution. However, the results from the TSMA are found improving the RAC quality. The pre-mix procedure of the TSMA can effectively develop some strength enhancing chemical products including, C(3)S(2)H(3), ettringite, CH and C(6)S(3)H, which shows that RAC made from the TSMA can improve the hydration processes.

Combined research effort on aggregate road materials

NASA Astrophysics Data System (ADS)

Kuznetsova, Elena; Hoff, Inge; Willy Danielsen, Svein; Wigum, Børge Johannes; Fladvad, Marit; Rieksts, Karlis; Loranger, Benoit; Barbieri, Diego

2017-04-01

In European countries, the average aggregate consumption per capita is 5 tons per year (European Aggregates Association 2016), while the corresponding number in Norway is 11 tons (Neeb 2015). Due to the increased demand for sand and gravel for construction purposes, e.g. in road construction, the last decade has seen a significant trend towards the use of crushed rock aggregates. Neeb (2015) reports that half of the Norwegian aggregate production (sand, gravel and crushed rock) is used for road construction, and 33 % of the overall sold tonnage of crushed rock is exported. This resource has been more and more preferred over sand and gravel due to the significant technological development of its process and utilization phase. In Norway, the development and implementation of crushed aggregate technology has been the main approach to solve natural resource scarcity (Danielsen and Kuznetsova 2015). In order to reduce aggregates transportation, it is aimed to use local aggregates and aggregates processed from rock excavations, tunneling, road cuts, etc. One issue focused in this research is the influence from blasting and processing on the final quality of the crushed aggregates, specifically relating to the properties for road construction purposes. It is therefor crucial to plan utilization of available materials for use in different road layers following the same production line. New developments and improved availability of mobile crushing and screening equipment could produce more sustainable and profitable sources of good quality aggregate materials from small volume deposits in proximity to construction sites. One of the biggest challenges today to use these materials is that the pavement design manual sets rigid requirements for pavement layers. Four research projects are being conducted in Norway to improve the use of local materials for road construction. Four aspects are to be covered by the research: a) geological characteristics of the materials, their b

Construction aggregates

USGS Publications Warehouse

Tepordei, V.V.

1993-01-01

Part of a special section on the market performance of industrial minerals in 1992. Production of construction aggregates increased by 4.6 percent in 1992. This increase was due, in part, to the increased funding for transportation and infrastructure projects. The U.S. produced about 1.05 Gt of crushed stone and an estimated 734 Mt of construction sand and gravel in 1992. Demand is expected to increase by about 5 percent in 1993.

The Bright Side of Corporate Diversification: Evidence from Internal Labor Markets

PubMed Central

Tate, Geoffrey

2015-01-01

We document differences in human-capital deployment between diversified and focused firms. We find that diversified firms have higher labor productivity and that they redeploy labor to industries with better prospects in response to changing opportunities. The opportunities and incentives provided in internal labor markets in turn affect the development of workers' human capital. We find that workers more frequently transition to other industries in which their diversified firms operate and with smaller wage losses compared with workers in the open market, even when they leave their original firms. Overall, internal labor markets provide a bright side to corporate diversification. PMID:26924889

Continuum-level modelling of cellular adhesion and matrix production in aggregates.

PubMed

Geris, Liesbet; Ashbourn, Joanna M A; Clarke, Tim

2011-05-01

Key regulators in tissue-engineering processes such as cell culture and cellular organisation are the cell-cell and cell-matrix interactions. As mathematical models are increasingly applied to investigate biological phenomena in the biomedical field, it is important, for some applications, that these models incorporate an adequate description of cell adhesion. This study describes the development of a continuum model that represents a cell-in-gel culture system used in bone-tissue engineering, namely that of a cell aggregate embedded in a hydrogel. Cell adhesion is modelled through the use of non-local (integral) terms in the partial differential equations. The simulation results demonstrate that the effects of cell-cell and cell-matrix adhesion are particularly important for the survival and growth of the cell population and the production of extracellular matrix by the cells, concurring with experimental observations in the literature.

Use of an Early Labor Lounge to Promote Admission in Active Labor.

PubMed

Paul, Julie A; Yount, Susan M; Breman, Rachel Blankstein; LeClair, Melissa; Keiran, Diane M; Landry, Nannette; Dever, Kimberly

2017-03-01

Professional maternity care organizations within the United States are aligned in the goal to prevent the first cesarean birth in nulliparous women with a term, singleton, vertex fetus. Currently, one in 3 women are at risk for having a cesarean birth. The most common reason for cesarean in the United States is labor dystocia. The evidence supports delaying admission to the birthing unit until active labor is established, thereby minimizing the inadvertent diagnosis of labor dystocia. Providers are familiar with the rationale supporting delayed admission to the birthing unit until active labor is established; however, there is very little evidence on how to effectively promote this delay. Provider apprehension and the lack of early labor support are challenges to sending women home to await the onset of active labor. Maternal anxiety, fear, pain, and unpreparedness also play a part in this reluctance. To address these obstacles, South Shore Hospital created an early labor lounge with stations aimed at instilling confidence in the birth team, promoting teamwork, facilitating relaxation, and reducing anxiety for laboring women. A literature review focusing on women's perceptions of promoting admission in active labor, maternal anxiety, and nonpharmacologic strategies for managing early labor are discussed within the context of the creation, implementation, and evaluation of an early labor lounge. © 2017 by the American College of Nurse-Midwives.

Aggregation of a Monoclonal Antibody Induced by Adsorption to Stainless Steel

PubMed Central

Bee, Jared S.; Davis, Michele; Freund, Erwin; Carpenter, John F.; Randolph, Theodore W.

2014-01-01

Stainless steel is a ubiquitous surface in therapeutic protein production equipment and is also present as the needle in some pre-filled syringe biopharmaceutical products. Stainless steel microparticles can cause of aggregation of a monoclonal antibody (mAb). The initial rate of mAb aggregation was second-order in steel surface area and zero-order in mAb concentration, generally consistent with a bimolecular surface aggregation being the rate-limiting step. Polysorbate 20 (PS20) suppressed the aggregation yet was unable to desorb the firmly bound first layer of protein that adsorbs to the stainless steel surface. Also, there was no exchange of mAb from the first adsorbed layer to the bulk phase, suggesting that the aggregation process actually occurs on subsequent adsorption layers. No oxidized Met residues were detected in the mass spectrum of a digest of a highly aggregated mAb, although there was five-fold increase in carbonyl groups due to protein oxidation. PMID:19725039

Induction of labor in women with a history of fast labor.

PubMed

Kenny, Tiffany H; Fenton, Bradford W; Melrose, Erica L; McCarroll, Michele L; von Gruenigen, Vivian E

2016-01-01

History of fast labor is currently subjectively defined and inductions for non-medical indications are becoming restricted. We hypothesized that women induced for a history of fast labor do not have faster previous labors and do not deliver more quickly. A retrospective case-control cohort design studied multiparas undergoing elective induction at one high risk center. Outcomes of dyads electively induced for a history of previous fast labor indication (PFast) were compared to controls with a psychosocial indication. A total of 612 elective inductions with 1074 previous deliveries were evaluated: 81 (13%) PFast and 531 (87%) control. PFast had faster previous labors (median 5.5 h, IQR: 4.5-6) versus. control (10 h, IQR: 9-10.5; p < 0.001). Subsequent delivery time from start to expulsion was shorter for PFast (median 7 h, IQR: 5-9, p < 0.001) than controls with and without a previous labor <5.5 h (8.6 h, IQR: 6-14 and 9.5 h, IQR: 7-15, respectively). PFast were less likely to have a serious maternal complication. Neonatal complications were similar. Patients induced for a history of fast labor do have faster previous labors, suggesting a significant history of fast labor can be defined as <5.5 h. These women deliver more quickly and with lower morbidity than controls when subsequently induced, therefore the benefit may warrant the risk for a select number of women with a history of a prior labor length <5.5 h.

Dissociation and Re-Aggregation of Multicell-Ensheathed Fragments Responsible for Rapid Production of Massive Clumps of Leptothrix Sheaths

PubMed Central

Kunoh, Tatsuki; Nagaoka, Noriyuki; McFarlane, Ian R.; Tamura, Katsunori; El-Naggar, Mohamed Y.; Kunoh, Hitoshi; Takada, Jun

2016-01-01

Species of the Fe/Mn-oxidizing bacteria Leptothrix produce tremendous amounts of microtubular, Fe/Mn-encrusted sheaths within a few days in outwells of groundwater that can rapidly clog water systems. To understand this mode of rapid sheath production and define the timescales involved, behaviors of sheath-forming Leptothrix sp. strain OUMS1 were examined using time-lapse video at the initial stage of sheath formation. OUMS1 formed clumps of tangled sheaths. Electron microscopy confirmed the presence of a thin layer of bacterial exopolymer fibrils around catenulate cells (corresponding to the immature sheath). In time-lapse videos, numerous sheath filaments that extended from the periphery of sheath clumps repeatedly fragmented at the apex of the same fragment, the fragments then aggregated and again elongated, eventually forming a large sheath clump comprising tangled sheaths within two days. In this study, we found that fast microscopic fragmentation, dissociation, re-aggregation and re-elongation events are the basis of the rapid, massive production of Leptothrix sheaths typically observed at macroscopic scales. PMID:27490579

The Future of Humanities Labor

ERIC Educational Resources Information Center

Bauerlein, Mark

2008-01-01

"Publish or perish" has long been the formula of academic labor at research universities, but for many humanities professors that imperative has decayed into a simple rule of production. The publish-or-perish model assumed a peer-review process that maintained quality, but more and more it is the bare volume of printed words that counts. When…

Sonographic landmarks to differentiate "false labor" and "early true labor" as a possible new application of ultrasound in labor ward.

PubMed

Bouzid, A; Kehila, M; Trabelsi, H; Abouda, H S; Ben Hmid, R; Chanoufi, M B

2017-04-01

To evaluate discrimination of clinical parameters and ultrasound examination to differentiate "false labor" and "true labor". In a prospective study during a period of 6 months, a total of 178 patients in term (37-41 weeks) consulting our obstetric unit for uterine contraction, were enrolled. Patients were examined separately by a midwife and a resident and separated into "true labor group" and "false labor group". The clinical characteristics of true versus false labor patients were compared. ROC curves were developed to determine an optimal cervical length and uterocervical angle for prediction of true labor. The prevalence of real labor was 57.3%. Patients who were in true labor had more painful and more frequent contractions. The "true labor" group had shorter cervical length and larger uterocervical angle. The optimal CL cut-off was 1.4mm with a specificity of 73% (RR 4.3, sensibility 63%, PPV 14%, NPV 95%). The optimal UCA cut off was 123° (RR 6.7, sensitivity 50%, specificity of 83%, PPV 10%, NPV 96%). The best performance was demonstrated by combined testing, yielding LHR+ that rich 13. In this study, we reported a new application of ultrasound to identify false labor and avoid unnecessary hospitalization with obstetric and adverse economic impacts. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Education and Female Labor Force Participation.

ERIC Educational Resources Information Center

Psacharopoulos, George; Tzannatos, Zafiris

Statistics have created an arbitrary, confusing distinction between a labor force participant and an nonparticipant; women were relegated to a second class employment citizenship that failed to recognize household production and assigned them a lower participation rate relative to males. Despite these shortcomings, such statistics can prove…

Conservative Labor Leaders Clean House: The Case of Brookwood Labor College.

ERIC Educational Resources Information Center

Grabiner, Gene

1979-01-01

Actions taken during the 1928 American Federation of Labor Convention against Brookwood Labor College are examined to demonstrate the depth and extent of anti-radicalism in this period of American labor's struggle for workers' education. (MJB)

Application of Recycled Ceramic Aggregates for the Production of Mineral-Asphalt Mixtures.

PubMed

Andrzejuk, Wojciech; Barnat-Hunek, Danuta; Siddique, Rafat; Zegardło, Bartosz; Łagód, Grzegorz

2018-04-24

This paper describes a method of designing and producing innovative mineral⁻asphalt mixtures, which utilize waste aggregate from the recycling of sanitary ceramics. The work presents the basic properties of the ceramic material, the investigation concerning the microstructure of the aggregate obtained from the grinding of waste, and a comparison with the images obtained for the aggregates usually employed in mineral⁻asphalt mixtures. The mixtures were designed for the application in the wearing course. Four series of mixtures were prepared. In the first and second, the ceramic aggregate constituted a partial substitute for dolomite, whereas in the third, we substituted granodiorite, and the fourth series contained only dolomite. The mixtures were examined for the content of soluble binder, the bulk density of samples, the presence of voids, the space filled with binder, and the susceptibility to water and frost corrosion. The obtained results were compared with the standard requirements. The microstructure as well as the contact zone in the considered mineral⁻asphalt mixtures are presented based on research conducted by means of a scanning electron microscope (SEM).

Application of Recycled Ceramic Aggregates for the Production of Mineral-Asphalt Mixtures

PubMed Central

Andrzejuk, Wojciech; Barnat-Hunek, Danuta; Siddique, Rafat; Zegardło, Bartosz; Łagód, Grzegorz

2018-01-01

This paper describes a method of designing and producing innovative mineral–asphalt mixtures, which utilize waste aggregate from the recycling of sanitary ceramics. The work presents the basic properties of the ceramic material, the investigation concerning the microstructure of the aggregate obtained from the grinding of waste, and a comparison with the images obtained for the aggregates usually employed in mineral–asphalt mixtures. The mixtures were designed for the application in the wearing course. Four series of mixtures were prepared. In the first and second, the ceramic aggregate constituted a partial substitute for dolomite, whereas in the third, we substituted granodiorite, and the fourth series contained only dolomite. The mixtures were examined for the content of soluble binder, the bulk density of samples, the presence of voids, the space filled with binder, and the susceptibility to water and frost corrosion. The obtained results were compared with the standard requirements. The microstructure as well as the contact zone in the considered mineral–asphalt mixtures are presented based on research conducted by means of a scanning electron microscope (SEM). PMID:29695115

Effect of settled diatom‐aggregates on benthic nitrogen cycling

PubMed Central

Thamdrup, Bo; Stief, Peter; Glud, Ronnie N.

2017-01-01

Abstract The marine sediment hosts a mosaic of microhabitats. Recently it has been demonstrated that the settlement of phycodetrital aggregates can induce local changes in the benthic O2 distribution due to confined enrichment of organic material and alteration of the diffusional transport. Here, we show how this microscale O2 shift substantially affects benthic nitrogen cycling. In sediment incubations, the settlement of diatom‐aggregates markedly enhanced benthic O2 and NO3− consumption and stimulated NO2− and NH4+ production. Oxygen microprofiles revealed the rapid development of anoxic niches within and underneath the aggregates. During 120 h following the settling of the aggregates, denitrification of NO3− from the overlying water increased from 13.5 μmol m−2 h−1 to 24.3 μmol m−2 h−1, as quantified by 15N enrichment experiment. Simultaneously, N2 production from coupled nitrification‐denitrification decreased from 33.4 μmol m−2 h−1 to 25.9 μmol m−2 h−1, probably due to temporary inhibition of the benthic nitrifying community. The two effects were of similar magnitude and left the total N2 production almost unaltered. At the aggregate surface, nitrification was, conversely, very efficient in oxidizing NH4+ liberated by mineralization of the aggregates. The produced NO3− was preferentially released into the overlying water and only a minor fraction contributed to denitrification activity. Overall, our data indicate that the abrupt change in O2 microdistribution caused by aggregates stimulates denitrification of NO3− from the overlying water, and loosens the coupling between benthic nitrification and denitrification both in time and space. The study contributes to expanding the conceptual and quantitative understanding of how nitrogen cycling is regulated in dynamic benthic environments. PMID:29456269

Environmentalism and natural aggregate mining

USGS Publications Warehouse

Drew, L.J.; Langer, W.H.; Sachs, J.S.

2002-01-01

living space has encroached on the sites of production; in other words, the act of production has engendered condemnation. Many other environmental problems that are associated with dust and noise and blasting from quarry and pit operations have been reduced through the efficient use of technology. Recycling concrete in buildings, bridges, and roads and asphaltic pavements will ultimately reduce the demand for virgin natural aggregate. The impact created by the large holes in the ground required for the mining of natural aggregate can be greatly reduced by planning their reclamation before mining begins. ?? 2002 International Association for Mathematical Geology.

Strength of masonry blocks made with recycled concrete aggregates

NASA Astrophysics Data System (ADS)

Matar, Pierre; Dalati, Rouba El

The idea of recycling concrete of demolished buildings aims at preserving the environment. Indeed, the reuse of concrete as aggregate in new concrete mixes helped to reduce the expenses related to construction and demolition (C&D) waste management and, especially, to protect the environment by reducing the development rate of new quarries. This paper presents the results of an experimental study conducted on masonry blocks containing aggregates resulting from concrete recycling. The purpose of this study is to investigate the effect of recycled aggregates on compressive strength of concrete blocks. Tests were performed on series of concrete blocks: five series each made of different proportions of recycled aggregates, and one series of reference blocks exclusively composed of natural aggregates. Tests showed that using recycled aggregates with addition of cement allows the production of concrete blocks with compressive strengths comparable to those obtained on concrete blocks made exclusively of natural aggregates.

Evidence-based clinical hypnosis for obstetrics, labor and delivery, and preterm labor.

PubMed

Brown, Donald Corey; Hammond, D Corydon

2007-07-01

This paper reviews the benefits and effectiveness of hypnosis in obstetrics and labor and delivery, demonstrating significant reductions in the use of analgesics and anesthesia and in shorter Stages 1 and 2 labors. It presents empirical and theoretical rationales for use of hypnosis in preterm labor (PTL) and labor and delivery at term. The benefits of hypnosis in relation to labor length, pain levels, and the enjoyment of labor, as well as its effectiveness in preterm labor are noted in randomized controlled trials and in a meta-analysis. Risk factors are reported for preterm delivery; hypnosis significantly prolongs pregnancy. Six cases are presented of hypnosis stopping PTL a number of times and when indicated at term. A case report of successful use of hypnosis in quadruplets is presented with some scripts. Suggestions are made for further research.

Identification of aggregates for Tennessee bituminous surface courses

NASA Astrophysics Data System (ADS)

Sauter, Heather Jean

Tennessee road construction is a major venue for federal and state spending. Tax dollars each year go to the maintenance and construction of roads. One aspect of highway construction that affects the public is the safety of its state roads. There are many factors that affect the safety of a given road. One factor that was focused on in this research was the polish resistance capabilities of aggregates. Several pre-evaluation methods have been used in the laboratory to predict what will happen in a field situation. A new pre-evaluation method was invented that utilized AASHTO T 304 procedure upscaled to accommodate surface bituminous aggregates. This new method, called the Tennessee Terminal Textural Condition Method (T3CM), was approved by Tennessee Department of Transportation to be used as a pre-evaluation method on bituminous surface courses. It was proven to be operator insensitive, repeatable, and an accurate indication of particle shape and texture. Further research was needed to correlate pre-evaluation methods to the current field method, ASTM E 274-85 Locked Wheel Skid Trailer. In this research, twenty-five in-place bituminous projects and eight source evaluations were investigated. The information gathered would further validate the T3CM and find the pre-evaluation method that best predicted the field method. In addition, new sources of aggregates for bituminous surface courses were revealed. The results of this research have shown T3CM to be highly repeatable with an overall coefficient of variation of 0.26% for an eight sample repeatability test. It was the best correlated pre-evaluation method with the locked wheel skid trailer method giving an R2 value of 0.3946 and a Pearson coefficient of 0.710. Being able to predict field performance of aggregates prior to construction is a powerful tool capable of saving time, money, labor, and possibly lives.

Child labor: a global problem on the rise.

PubMed

Papesca, L K; Joss, D M

1996-01-01

This paper intends to review and analyse the literature focusing on the topic of child labor. Child labor is a global problem on the rise despite modern Western beliefs. Today, such complex and interrelated issues as poverty, illiteracy, and politics fuel the growth of the number of children being exploited for economic gain. It is often difficult to imagine that the products we purchase are manufactured in such horrible conditions, but as consumers we must take responsibility for the well-being of these children.

Cognitive Capitalism, Education and Digital Labor

ERIC Educational Resources Information Center

Peters, Michael A., Ed.; Bulut, Ergin, Ed.

2011-01-01

Cognitive capitalism--sometimes referred to as "third capitalism," after mercantilism and industrial capitalism--is an increasingly significant theory, given its focus on the socio-economic changes caused by Internet and Web 2.0 technologies that have transformed the mode of production and the nature of labor. The theory of cognitive…

Sustainable aggregate production planning in the chemical process industry - A benchmark problem and dataset.

PubMed

Brandenburg, Marcus; Hahn, Gerd J

2018-06-01

Process industries typically involve complex manufacturing operations and thus require adequate decision support for aggregate production planning (APP). The need for powerful and efficient approaches to solve complex APP problems persists. Problem-specific solution approaches are advantageous compared to standardized approaches that are designed to provide basic decision support for a broad range of planning problems but inadequate to optimize under consideration of specific settings. This in turn calls for methods to compare different approaches regarding their computational performance and solution quality. In this paper, we present a benchmarking problem for APP in the chemical process industry. The presented problem focuses on (i) sustainable operations planning involving multiple alternative production modes/routings with specific production-related carbon emission and the social dimension of varying operating rates and (ii) integrated campaign planning with production mix/volume on the operational level. The mutual trade-offs between economic, environmental and social factors can be considered as externalized factors (production-related carbon emission and overtime working hours) as well as internalized ones (resulting costs). We provide data for all problem parameters in addition to a detailed verbal problem statement. We refer to Hahn and Brandenburg [1] for a first numerical analysis based on and for future research perspectives arising from this benchmarking problem.

Lactobacillus rhamnosus GG (ATCC 53103) and platelet aggregation in vitro.

PubMed

Korpela, R; Moilanen, E; Saxelin, M; Vapaatalo, H

1997-06-17

Lactobacillus rhamnosus GG is an experimentally and clinically well documented probiotic used in different dairy products. The present study aimed to investigate the safety aspects of Lactobacillus rhamnosus GG, particularly with respect to platelet aggregation, the initiating event in thrombosis. Platelet rich plasma was separated from the blood of healthy volunteers, and the effects of Lactobacillus rhamnosus GG (ATCC 53103), Lactobacillus rhamnosus (ATCC 7469) and Enterococcus faecium T2L6 in different dilutions on spontaneous, ADP- and adrenaline-induced aggregation were tested. The bacteria did not influence spontaneous aggregation. Only Enterococcus faecium T2L6 enhanced the adrenaline-induced aggregation, with a less clear effect on ADP-induced aggregation.

Where Are the Babies? Labor Market Conditions and Fertility in Europe

PubMed Central

Adsera, Alicia

2013-01-01

Cross-country differences in both the age at first birth and fertility are substantial in Europe. This paper uses distinct fluctuations in unemployment rates across European countries during the 1980s and the 1990s combined with broad differences in their labor market arrangements to analyze the associations between fertility timing and the changing economic environment with close to 50,000 women from thirteen European countries. First, it employs time varying measures of aggregate market conditions in each woman s country as covariates and second, it adds micro-measures of each woman s labor market history to the models. High and persistent unemployment in a country is associated with delays in childbearing (and second births). The association is robust to diverse measures of unemployment and to controls for family-friendly policies. Besides moderate unemployment, a large public employment sector (which provides security and benefits) is coupled with faster transitions to all births. Women with temporary contracts, mostly in Southern Europe, are the least likely to give birth to a second child. PMID:23580794

Enhanced DNA Sensing via Catalytic Aggregation of Gold Nanoparticles

PubMed Central

Huttanus, Herbert M.; Graugnard, Elton; Yurke, Bernard; Knowlton, William B.; Kuang, Wan; Hughes, William L.; Lee, Jeunghoon

2014-01-01

A catalytic colorimetric detection scheme that incorporates a DNA-based hybridization chain reaction into gold nanoparticles was designed and tested. While direct aggregation forms an inter-particle linkage from only ones target DNA strand, the catalytic aggregation forms multiple linkages from a single target DNA strand. Gold nanoparticles were functionalized with thiol-modified DNA strands capable of undergoing hybridization chain reactions. The changes in their absorption spectra were measured at different times and target concentrations and compared against direct aggregation. Catalytic aggregation showed a multifold increase in sensitivity at low target concentrations when compared to direct aggregation. Gel electrophoresis was performed to compare DNA hybridization reactions in catalytic and direct aggregation schemes, and the product formation was confirmed in the catalytic aggregation scheme at low levels of target concentrations. The catalytic aggregation scheme also showed high target specificity. This application of a DNA reaction network to gold nanoparticle-based colorimetric detection enables highly-sensitive, field-deployable, colorimetric readout systems capable of detecting a variety of biomolecules. PMID:23891867

Prediction and Reduction of the Aggregation of Monoclonal Antibodies.

PubMed

van der Kant, Rob; Karow-Zwick, Anne R; Van Durme, Joost; Blech, Michaela; Gallardo, Rodrigo; Seeliger, Daniel; Aßfalg, Kerstin; Baatsen, Pieter; Compernolle, Griet; Gils, Ann; Studts, Joey M; Schulz, Patrick; Garidel, Patrick; Schymkowitz, Joost; Rousseau, Frederic

2017-04-21

Protein aggregation remains a major area of focus in the production of monoclonal antibodies. Improving the intrinsic properties of antibodies can improve manufacturability, attrition rates, safety, formulation, titers, immunogenicity, and solubility. Here, we explore the potential of predicting and reducing the aggregation propensity of monoclonal antibodies, based on the identification of aggregation-prone regions and their contribution to the thermodynamic stability of the protein. Although aggregation-prone regions are thought to occur in the antigen binding region to drive hydrophobic binding with antigen, we were able to rationally design variants that display a marked decrease in aggregation propensity while retaining antigen binding through the introduction of artificial aggregation gatekeeper residues. The reduction in aggregation propensity was accompanied by an increase in expression titer, showing that reducing protein aggregation is beneficial throughout the development process. The data presented show that this approach can significantly reduce liabilities in novel therapeutic antibodies and proteins, leading to a more efficient path to clinical studies. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

An aggregate analysis of personal care products in the environment: Identifying the distribution of environmentally-relevant concentrations.

PubMed

Hopkins, Zachary R; Blaney, Lee

2016-01-01

Over the past 3-4 decades, per capita consumption of personal care products (PCPs) has steadily risen, resulting in increased discharge of the active and inactive ingredients present in these products into wastewater collection systems. PCPs comprise a long list of compounds employed in toothpaste, sunscreen, lotions, soaps, body washes, and insect repellants, among others. While comprehensive toxicological studies are not yet available, an increasing body of literature has shown that PCPs of all classes can impact aquatic wildlife, bacteria, and/or mammalian cells at low concentrations. Ongoing research efforts have identified PCPs in a variety of environmental compartments, including raw wastewater, wastewater effluent, surface water, wastewater solids, sediment, groundwater, and drinking water. Here, an aggregate analysis of over 5000 reported detections was conducted to better understand the distribution of environmentally-relevant PCP concentrations in, and between, these compartments. The distributions were used to identify whether aggregated environmentally-relevant concentration ranges intersected with available toxicity data. For raw wastewater, wastewater effluent, and surface water, a clear overlap was present between the 25th-75th percentiles and identified toxicity levels. This analysis suggests that improved wastewater treatment of antimicrobials, UV filters, and polycyclic musks is required to prevent negative impacts on aquatic species. Copyright © 2016 Elsevier Ltd. All rights reserved.

Reusing recycled aggregates in structural concrete

NASA Astrophysics Data System (ADS)

Kou, Shicong

results, a number of recommendations were made on how to optimize the use of recycled aggregates for structural concrete production. The results demonstrate that one of the practical ways to utilize a higher percentage of recycled aggregates in concrete is "precasting" with the use of fly ash and an initial steam curing stage immediately after casting.

Modulation of platelet aggregation by areca nut and betel leaf ingredients: roles of reactive oxygen species and cyclooxygenase.

PubMed

Jeng, Jiiang-Huei; Chen, Shiao-Yun; Liao, Chang-Hui; Tung, Yuan-Yii; Lin, Bor-Ru; Hahn, Liang-Jiunn; Chang, Mei-Chi

2002-05-01

There are 2 to 6 billion betel quid (BQ) chewers in the world. Areca nut (AN), a BQ component, modulates arachidonic acid (AA) metabolism, which is crucial for platelet function. AN extract (1 and 2 mg/ml) stimulated rabbit platelet aggregation, with induction of thromboxane B2 (TXB2) production. Contrastingly, Piper betle leaf (PBL) extract inhibited AA-, collagen-, and U46619-induced platelet aggregation, and TXB2 and prostaglandin-D2 (PGD2) production. PBL extract also inhibited platelet TXB2 and PGD2 production triggered by thrombin, platelet activating factor (PAF), and adenosine diphosphate (ADP), whereas little effect on platelet aggregation was noted. Moreover, PBL is a scavenger of O2(*-) and *OH, and inhibits xanthine oxidase activity and the (*)OH-induced PUC18 DNA breaks. Deferoxamine, 1,2-bis(2-aminophenoxy)ethane-N,N,N',N'-tetraacetic acid (BAPTA) and neomycin prevented AN-induced platelet aggregation and TXB2 production. Indomethacin, genistein, and PBL extract inhibited only TXB2 production, but not platelet aggregation. Catalase, superoxide dismutase, and dimethylthiourea (DMT) showed little effect on AN-induced platelet aggregation, whereas catalase and DMT inhibited the AN-induced TXB2 production. These results suggest that AN-induced platelet aggregation is associated with iron-mediated reactive oxygen species production, calcium mobilization, phospholipase C activation, and TXB2 production. PBL inhibited platelet aggregation via both its antioxidative effects and effects on TXB2 and PGD2 production. Effects of AN and PBL on platelet aggregation and AA metabolism is crucial for platelet activation in the oral mucosa and cardiovascular system in BQ chewers.

29 CFR 401.7 - Labor dispute.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 2 2010-07-01 2010-07-01 false Labor dispute. 401.7 Section 401.7 Labor Regulations Relating to Labor OFFICE OF LABOR-MANAGEMENT STANDARDS, DEPARTMENT OF LABOR LABOR-MANAGEMENT STANDARDS MEANING OF TERMS USED IN THIS SUBCHAPTER § 401.7 Labor dispute. Labor dispute includes any controversy...

Female labor force participation: an international perspective.

PubMed

Psacharopoulos, G; Tzannatos, Z

1989-07-01

This article gives an international perspective in regard to female participation in the labor force. In most countries women contribute less than men toward the value of recorded production. Social environment, statistical inconsistencies and methods of recording labor all contribute to this inequity. In Britain for instance, women caring for the household duties are in some studies considered to be part of the labor force and in other studies they are not. Further, internationally, women often find themselves in casual, temporary, or seasonal work that goes unrecorded. Defining what "labor force participation" constitutes is a key starting point to any survey. At what age is one considered employable? What constitutes a person "actively seeking" employment? Economists often try to explain labor force participation rate by age, sex, race and income groups and use this information to cite trends. The income-leisure model theorizes that choice of work or non-work by women is based primarily upon wages for work vs. wages for non-work. This theory sees non-labor income exerting a negative influence. Empirical evidence, however, suggests that women will choose work if wages are good regardless of any non-work benefits. Because most men are permanently in the labor force, estimates of labor reserves and projections of supply focus mostly on women. International generalizations are often misleading since trends vary widely among countries. During the last 20 years the global female participation rate has remained almost constant, but this is misleading. The percentage of working women in industrial countries increased 10%; developing countries showed a decrease of 7%. Female rates are often tied closely to shifts in the overall economy, (e.g., a transition from an agricultural to an industrial economy often sees a drop in female labor because subsistence jobs are lost). Of course the ability of women to bear children and the social expectations regarding child care often

Labor efficiency and intensity of land use in rice production: an example from Kalimantan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Padoch, C.

1986-09-01

The ''Boserup hypothesis'' contends that land-intensive systems of agriculture will be adopted only when high population density precludes the use of land-extensive methods. In the Kerayan District of East Kalimantan (Indonesia) the Lun Dayeh practice permanent-field rice cultivation despite very low human densities. An examination of the relative labor efficiencies of shifting and permanent-field agriculture in the Kerayan, as well as of local environmental and historical variables, explains why this ''anomalous'' situation exists. It is argued that since relative success in production of rice by shifting- and permanent-field irrigated methods depends on many natural and social conditions other than levelsmore » of population density, the ''environment-free'' Boserup hypothesis cannot adequately explain or predict the occurrence of particular forms of rice agriculture.« less

Korean Emotional Laborers' Job Stressors and Relievers: Focus on Work Conditions and Emotional Labor Properties.

PubMed

Lee, Garam

2015-12-01

The present study aims to investigate job stressors and stress relievers for Korean emotional laborers, specifically focusing on the effects of work conditions and emotional labor properties. Emotional laborers are asked to hide or distort their real emotions in their interaction with clients. They are exposed to high levels of stress in the emotional labor process, which leads to serious mental health risks including burnout, depression, and even suicide impulse. Exploring job stressors and relieving factors would be the first step in seeking alternatives to protect emotional laborers from those mental health risks. Using the third wave data of Korean Working Conditions Survey, logistic regression analysis was conducted for two purposes: to examine the relations of emotional labor and stress, and to find out job stressors and relievers for emotional laborers. The chances of stress arousal are 3.5 times higher for emotional laborers; emotional laborers experience double risk-burden for stress arousal. In addition to general job stressors, emotional laborers need to bear burdens related to emotional labor properties. The effect of social support at the workplace is not significant for stress relief, unlike common assumptions, whereas subjective satisfaction (wage satisfaction and work-life balance) is proven to have relieving effects on emotional laborers' job stress. From the results, the importance of a balanced understanding of emotional labor for establishing effective policies for emotional laborer protection is stressed.

New Labor Force Projections to 1990. Special Labor Force Report 197.

ERIC Educational Resources Information Center

Fullerton, Howard N., Jr.; Flaim, Paul O.

Prepared as part of the Bureau of Labor Statistics' periodic reassessment of its projections of the future growth trends of the various sectors of the American economy, new labor force projections to 1990 are presented based on trends in labor force participation as observed through 1975 and on the most recent population projections of the U.S.…

Preterm Induction of Labor: Predictors of Vaginal Delivery and Labor Curves

PubMed Central

Feghali, Maisa; Timofeev, Julia; Huang, Chun-Chih; Driggers, Rita; Miodovnik, Menachem; Landy, Helain J.; Umans, Jason G.

2014-01-01

Objective To evaluate the labor curves of patients undergoing preterm induction of labor (IOL) and assess possible predictors of vaginal delivery (VD). Study Design Data from the NICHD Consortium on Safe Labor were analyzed. A total of 6,555 women undergoing medically-indicated IOL before 37 weeks gestational age (GA) were included in this analysis. Patients were divided into four groups based on gestational age: A: 24-27+6, B: 28-30+6, C: 31-33+6, and D: 34-36+6 weeks. Pregnant women with a contraindication to VD, IOL at or after 37 weeks and those without data from cervical exam on admission were excluded. ANOVA was used to assess differences between GA groups. Multiple logistic regression was used to assess predictors of VD. A repeated measures analysis was used to determine average labor curves. Results Rates of vaginal live births increased with GA, from 35% (Group A) to 76% (Group D). Parous women [odds ratio (OR)=6.78, 95% confidence interval (CI) 6.38-7.21] and those with a favorable cervix at the start of IOL (OR=2.35, 95% CI 2.23-2.48) were more likely to deliver vaginally. Analysis of labor curves in nulliparous women showed shorter duration of labor with increasing GA; the active phase of labor was, however, similar across all GA. Conclusion The majority of women undergoing medically-indicated preterm IOL between 24 and 36+6 weeks’ GA deliver vaginally. The strongest predictor of VD was parity. Preterm IOL had a limited influence on estimated labor curves across gestational age. PMID:25068566

Nontronite Particle Aggregation Induced by Microbial Fe(III) Reduction and Exopolysaccharide Production

DTIC Science & Technology

2007-01-01

polymers to achieve desired properties (such Chenu el al., 1979; Kimn el al., 2005). Among these as aggregation. dispersion ) without any structural...performed with and without Na pyrophosphate as a term ’aggregation’ broadly to include all processes that dispersant (25 mM) with shaking in a water...coagulation, at 25 mM was found to be optimal to disperse individual flocculation, agglutination, etc.). The results of this clay particles without

Reduction in soil aggregate size distribution due to wind erosion

NASA Astrophysics Data System (ADS)

Swet, Nitzan; Katra, Itzhak

2017-04-01

Soil erosion process by wind causes emission of fine soil particles, and thus alters the topsoil's properties, fertility, and erodibility. Topsoil resistance to erosion depends on its physicochemical properties, especially on the soil aggregation. Although the key role of aggregates in soil erodibility, quantitative information on the relations between soil aggregate size distribution (ASD) and erosion is still lucking. This study focuses on ASD analyses before and after soil erosion by wind. Wind tunnel experiments and soil analyses were conducted on semiarid loess topsoils with different initial conditions of aggregation. The results show that in all initial soil conditions saltation of sand particles caused the breakdown of macro-aggregates > 500 µm, resulting in increase of micro-aggregates (63-250 µm). The micro-aggregate production increases with the wind shear velocity (up to 0.61 m s-1) for soils with available macro-aggregates. The findings highlight dynamics in soil aggregation in response to erosion process, and therefore the significance of ASD in quantifying soil degradation and soil loss potential.

Challenges for simultaneous nitrification, denitrification, and phosphorus removal in microbial aggregates: mass transfer limitation and nitrous oxide production.

PubMed

Meyer, Rikke Louise; Zeng, Raymond Jianxiong; Giugliano, Valerio; Blackall, Linda Louise

2005-05-01

The microbial community composition and activity was investigated in aggregates from a lab-scale bioreactor, in which nitrification, denitrification and phosphorus removal occurred simultaneously. The biomass was highly enriched for polyphosphate accumulating organisms facilitating complete removal of phosphorus from the bulk liquid; however, some inorganic nitrogen still remained at the end of the reactor cycle. This was ascribed to incomplete coupling of nitrification and denitrification causing NO(3)(-) accumulation. After 2 h of aeration, denitrification was dependent on the activity of nitrifying bacteria facilitating the formation of anoxic zones in the aggregates; hence, denitrification could not occur without simultaneous nitrification towards the end of the reactor cycle. Nitrous oxide was identified as a product of denitrification, when based on stored PHA as carbon source. This observation is of critical importance to the outlook of applying PHA-driven denitrification in activated sludge processes.

Reproducing Life and Labor: Global Processes and Working Children in Tijuana, Mexico

ERIC Educational Resources Information Center

Aitken, Stuart; Estrada, Silvia Lopez; Jennings, Joel; Aguirre, Lina Maria

2006-01-01

The issue of child labor continues to challenge thinking on the nature of work, play, schooling and apprenticeship. New wisdom from some contemporary academic writing places children closer to the center of our understanding of consumption, production and reproduction, and at the heart of inequities generated by globalization. Child labor comes in…

Psychoprophylaxis during labor: associations with labor-related outcomes and experience of childbirth.

PubMed

Bergström, Malin; Kieler, Helle; Waldenström, Ulla

2010-06-01

To study whether use of psychoprophylaxis during labor affects course of labor and experience of childbirth in nulliparous women. Cohort study. Women were recruited from 15 antenatal clinics in Sweden between October 2005 and January 2007. A total of 857 nulliparous women with a planned vaginal delivery. Using data from a randomized controlled trial of antenatal education where the allocated groups were merged, we compared course of labor and experience of childbirth between women who used psychoprophylaxis during labor and those who did not. Data were collected by questionnaires in mid-pregnancy and three months after birth, and from the Swedish Medical Birth Register. Logistic regression was used to assess associations. Mode of delivery, augmentation of labor, length of labor, Apgar score, pain relief and experience of childbirth as measured by the Wijma Delivery Experience Questionnaire. Use of psychoprophylaxis during labor was associated with a lower risk of emergency cesarean section (adjusted odds ratio (OR) 0.57; 95% confidence interval (CI) 0.37-0.88), but an increased risk of augmentation of labor (adjusted OR 1.68; 95% CI 1.23-2.28). No statistical differences were found in length of labor (adjusted OR 1.32; 95% CI 0.95-1.83), Apgar score < 7 at five minutes (adjusted OR 0.82; 95% CI 0.33-2.01), epidural analgesia (adjusted OR 1.13; 95% CI 0.84-1.53) or fearful childbirth experience (adjusted OR 1.04; 95% CI 0.62-1.74). Psychoprophylaxis may reduce the rate of emergency cesarean section but may not affect the experience of childbirth.

Korean Emotional Laborers' Job Stressors and Relievers: Focus on Work Conditions and Emotional Labor Properties

PubMed Central

Lee, Garam

2015-01-01

Background The present study aims to investigate job stressors and stress relievers for Korean emotional laborers, specifically focusing on the effects of work conditions and emotional labor properties. Emotional laborers are asked to hide or distort their real emotions in their interaction with clients. They are exposed to high levels of stress in the emotional labor process, which leads to serious mental health risks including burnout, depression, and even suicide impulse. Exploring job stressors and relieving factors would be the first step in seeking alternatives to protect emotional laborers from those mental health risks. Methods Using the third wave data of Korean Working Conditions Survey, logistic regression analysis was conducted for two purposes: to examine the relations of emotional labor and stress, and to find out job stressors and relievers for emotional laborers. Results The chances of stress arousal are 3.5 times higher for emotional laborers; emotional laborers experience double risk-burden for stress arousal. In addition to general job stressors, emotional laborers need to bear burdens related to emotional labor properties. The effect of social support at the workplace is not significant for stress relief, unlike common assumptions, whereas subjective satisfaction (wage satisfaction and work-life balance) is proven to have relieving effects on emotional laborers' job stress. Conclusion From the results, the importance of a balanced understanding of emotional labor for establishing effective policies for emotional laborer protection is stressed. PMID:26929847

IL-18 associated with lung lymphoid aggregates drives IFNγ production in severe COPD.

PubMed

Briend, Emmanuel; Ferguson, G John; Mori, Michiko; Damera, Gautam; Stephenson, Katherine; Karp, Natasha A; Sethi, Sanjay; Ward, Christine K; Sleeman, Matthew A; Erjefält, Jonas S; Finch, Donna K

2017-08-22

Increased interferon gamma (IFNγ) release occurs in Chronic Obstructive Pulmonary Disease (COPD) lungs. IFNγ supports optimal viral clearance, but if dysregulated could increase lung tissue destruction. The present study investigates which mediators most closely correlate with IFNγ in sputum in stable and exacerbating disease, and seeks to shed light on the spatial requirements for innate production of IFNγ, as reported in mouse lymph nodes, to observe whether such microenvironmental cellular organisation is relevant to IFNγ production in COPD lung. We show tertiary follicle formation in severe disease alters the dominant mechanistic drivers of IFNγ production, because cells producing interleukin-18, a key regulator of IFNγ, are highly associated with such structures. Interleukin-1 family cytokines correlated with IFNγ in COPD sputum. We observed that the primary source of IL-18 in COPD lungs was myeloid cells within lymphoid aggregates and IL-18 was increased in severe disease. IL-18 released from infected epithelium or from activated myeloid cells, was more dominant in driving IFNγ when IL-18-producing and responder cells were in close proximity. Unlike tight regulation to control infection spread in lymphoid organs, this local interface between IL-18-expressing and responder cell is increasingly supported in lung as disease progresses, increasing its potential to increase tissue damage via IFNγ.

Mineral trioxide aggregate: part 2 - a review of the material aspects.

PubMed

Malhotra, Neeraj; Agarwal, Antara; Mala, Kundabala

2013-03-01

The purpose of this two-part series is to review the composition, properties, and products of mineral trioxide aggregate (MTA) materials. PubMed and MedLine electronic databases were used to identify scientific papers from January 1991 to May 2010. Based on the selected inclusion criteria, citations were referenced from the scientific peer-reviewed dental literature. Mineral trioxide aggregate is a refined form of the parent compound, Portland cement (PC), and demonstrates a strong biocompatibility due to the high pH level and the material's ability to form hydroxyapatite. Mineral trioxide aggregate materials provide better microleakage protection than traditional endodontic materials as observed in findings from dye-leakage, fluid-filtration, protein-leakage, and bacterial penetration-leakage studies and has been recognized as a bioactive material. Various MTA commercial products are available, including gray mineral trioxide aggregate (GMTA), white mineral trioxide aggregate (WMTA), and mineral trioxide aggregate-Angelus (AMTA). Although these materials are indicated for various dental uses and applications, long-term in-vivo clinical studies are needed. Part 1 of this article highlighted and discussed the composition and characteristics of the material. Part 2 provides an overview of commercially available MTA materials.

An overview of aggregate resources in the United States

USGS Publications Warehouse

Langer, William H.; Scott, P.W.; Bristow, C.M.

2002-01-01

In 2000 the USA produced about 2.7 billion tonnes of aggregate worth about $13.7 billion. Both crushed stone and sand and gravel are produced in virtually every State, although limited quantities are available in the Gulf Coastal Plain, the Colorado Plateau , the Wyoming Basin and the Great Plains. Prices vary depending on the product and location. Most aggregates are transported by road, and minor amounts by railroad, barge on navigable inland channels, and through the Great Lake ports. Imports and exports of aggregates are very minor. A major amount f crushed stone aggregates is consumed by concrete aggregate. Recycled aggregates account for about 8% of total demand, although the amount recycled is thought to be increasing. Current issues facing the inductry unclude the differences in quality specifications between States, adjusting to the increasing concern for the impact of aggregate mining on the environmentm, health issues from particulate matter and crystalline silica, and the complexity of obtaining permits for extraction. Redcustion in the number od companies extracting aggregrates is likely to occur through acquisitions.

Notes on the incorporation of third world women into wage-labor through immigration and off-shore production.

PubMed

Sassen-koob, S

1984-01-01

The different forms and geographic locations in which the expanded incorporation of Third World women into wage labor occur may be closely interrelated. 2 such instances examined in this article are: 1) the recruitment of young women, without previous labor force experience, into the new manufacturing and service jobs generated by export-led manufacturing in several Caribbean and Asian countries; and 2) the employment of immigrant women in large cities of highly industrialized countries which have undergone basic economic restructuring. While many of these women may have become domestic or international migrants as a function of their husbands' or family's migration, the more fundamental processes of this restructuring are the ones promoting the formation of a supply of women migrants and a demand for this type of labor. Examples are the shift of plants and offices to Third World countries, and the demand for immigrant women labor in large cities within the US. The latter is a manifestation of the general shift to a service economy, the downgrading of manufacturing, partly to keep it competitive with overseas plants, and the direct and indirect demand for low-wage labor generated by the expansion of management and control functions centered in these large cities, and necessary for the regulation of the global economy. The feminization of job supply and the need to secure a politically adequate labor supply, which combine to create a demand for the type of labor represented by migrant women, suggest that gender has to be considered in conjunction with the structural arrangements and that gender by itself cannot adequately describe the nature of migrant labor.

Effect of lightweight aggregates prepared from fly ash on lightweight concrete performances

NASA Astrophysics Data System (ADS)

Punlert, S.; Laoratanakul, P.; Kongdee, R.; Suntako, R.

2017-09-01

Lightweight aggregates were prepared from fly ash of by-products from the paper industry. The influence of the ratio of clay to fly ash and processing conditions on lightweight aggregates properties were investigated. It was found that the amount of fly ash directly affected to porosity of lightweight aggregates. Lightweight aggregates with the ratio of clay to fly ash at 80:20 wt% using the sintering temperature at 1210°C exhibits bulk density of 1.66 g cm-3, compressive strength of 25 MPa and water absorption of 0.55%. The replacement of coarse aggregates with lightweight aggregates at 100 wt% for concrete production showed the ultimate properties of concrete with density of 1780 g cm-3, water absorption of 3.55%, compressive strength of 40.94 MPa and thermal conductivity of 0.77 W m-1K-1. The concrete had more than 25% weight reduction while keeping a similar compressive strength to an ordinary concrete. This is revealed that lightweight aggregates could be applied into structural concrete because it was able to reduce work load and increase safety factor of construction.

Aggregation of the rhizospheric bacterium Azospirillum brasilense in response to oxygen

NASA Astrophysics Data System (ADS)

Abdoun, Hamid; McMillan, Mary; Pereg, Lily

2016-04-01

Azospirillum brasilense spp. have ecological, scientific and agricultural importance. As model plant growth promoting rhizobacteria they interact with a large variety of plants, including important food and cash crops. Azospirillum strains are known for their production of plant growth hormones that enhance root systems and for their ability to fix nitrogen. Azospirillum cells transform in response to environmental cues. The production of exopolysaccharides and cell aggregation during cellular transformation are important steps in the attachment of Azospirillum to roots. We investigate signals that induce cellular transformation and aggregation in the Azospirillum and report on the importance of oxygen to the process of aggregation in this rhizospheric bacterium.

Building aggregate timber supply models from individual harvest choice

Treesearch

Maksym Polyakov; David N. Wear; Robert Huggett

2009-01-01

Timber supply has traditionally been modelled using aggregate data. In this paper, we build aggregate supply models for four roundwood products for the US state of North Carolina from a stand-level harvest choice model applied to detailed forest inventory. The simulated elasticities of pulpwood supply are much lower than reported by previous studies. Cross price...

Co-production of GroELS discriminates between intrinsic and thermally-induced recombinant protein aggregation during substrate quality control

PubMed Central

2011-01-01

Background The effects and effectiveness of the chaperone pair GroELS on the yield and quality of recombinant polypeptides produced in Escherichia coli are matter of controversy, as the reported activities of this complex are not always consistent and eventually indicate undesired side effects. The divergence in the reported data could be due, at least partially, to different experimental conditions in independent research approaches. Results We have then selected two structurally different model proteins (namely GFP and E. coli β-galactosidase) and two derived aggregation-prone fusions to explore, in a systematic way, the eventual effects of GroELS co-production on yield, solubility and conformational quality. Host cells were cultured at two alternative temperatures below the threshold at which thermal stress is expected to be triggered, to minimize the involvement of independent stress factors. Conclusions From the analysis of protein yield, solubility and biological activity of the four model proteins produced alone or along the chaperones, we conclude that GroELS impacts on yield and quality of aggregation-prone proteins with intrinsic determinants but not on thermally induced protein aggregation. No effective modifications of protein solubility have been observed, but significant stabilization of small (encapsulable) substrates and moderate chaperone-induced degradation of larger (excluded) polypeptides. These findings indicate that the activities of this chaperone pair in the context of actively producing recombinant bacteria discriminate between intrinsic and thermally-induced protein aggregation, and that the side effects of GroELS overproduction might be determined by substrate size. PMID:21992454

Particle Aggregation During Fe(III) Bioreduction in Nontronite

NASA Astrophysics Data System (ADS)

Jaisi, D. P.; Dong, H.; Hi, Z.; Kim, J.

2005-12-01

the particles size of 0.12-0.22 and 1.42-1.8 mm, respectively. The particle aggregation was limited in control experiment to the factor of 2.8 and 2.1 for these two size fractions, respectively. The measured electrophoretic mobility decreased with increase in the extent of bioreduction and aggregation, but the rate of decrease was greatest in the finest size fraction. The EPS measurements showed the increase in the carbohydrate and protein fractions as a result of bioreduction. Separate experiments were performed to understand the relative contribution of Fe(III) reduction and EPS production in controlling nontronite particle aggregation The rate of particle aggregation was measured for nontronite that was chemically pre-reduced by dithionite to various extents, both with and without addition of dextran, a neutral and pure EPS. The aggregation rate was greater in the nontronite that were pre-reduced to a higher extent than those with a lower extent of reduction. The relative contribution to particle aggregation due to Fe(III) reduction and polysaccharide bridging was about 4:1. However, in the real system where bacterial cells are involved, and amount of EPS production and extent of Fe(III) bioreduction increase with time, the relative contribution may be different than in this simple system. In summary, we conclude that both Fe(III) reduction and microbial production of EPS contribute to the observed nontronite particle aggregation with Fe(III) reduction playing more dominant role.

Calcium oxalate monohydrate aggregation induced by aggregation of desialylated Tamm-Horsfall protein

PubMed Central

Viswanathan, Pragasam; Rimer, Jeffrey D.; Kolbach, Ann M.; Kleinman, Jack G.

2011-01-01

Tamm-Horsfall protein (THP) is thought to protect against calcium oxalate monohydrate (COM) stone formation by inhibiting COM aggregation. Several studies reported that stone formers produce THP with reduced levels of glycosylation, particularly sialic acid levels, which leads to reduced negative charge. In this study, normal THP was treated with neuraminidase to remove sialic acid residues, confirmed by an isoelectric point shift to higher pH. COM aggregation assays revealed that desialylated THP (ds-THP) promoted COM aggregation, while normal THP inhibited aggregation. The appearance of protein aggregates in solutions at ds-THP concentrations ≥1 µg/mL in 150 mM NaCl correlated with COM aggregation promotion, implying that ds-THP aggregation induced COM aggregation. The aggregation-promoting effect of the ds-THP was independent of pH above its isoelectric point, but was substantially reduced at low ionic strength, where protein aggregation was much reduced. COM aggregation promotion was maximized at a ds-THP to COM mass ratio of ~0.025, which can be explained by a model wherein partial COM surface coverage by ds-THP aggregates promotes crystal aggregation by bridging opposing COM surfaces, whereas higher surface coverage leads to repulsion between adsorbed ds-THP aggregates. Thus, desialylation of THP apparently abrogates a normal defensive action of THP by inducing protein aggregation, and subsequently COM aggregation, a condition that favors kidney stone formation. PMID:21229239

New methods allowing the detection of protein aggregates

PubMed Central

Demeule, Barthélemy; Palais, Caroline; Machaidze, Gia; Gurny, Robert

2009-01-01

Aggregation compromises the safety and efficacy of therapeutic proteins. According to the manufacturer, the therapeutic immunoglobulin trastuzumab (Herceptin®) should be diluted in 0.9% sodium chloride before administration. Dilution in 5% dextrose solutions is prohibited. The reason for the interdiction is not mentioned in the Food and Drug Administration (FDA) documentation, but the European Medicines Agency (EMEA) Summary of Product Characteristics states that dilution of trastuzumab in dextrose solutions results in protein aggregation. In this paper, asymmetrical flow field-flow fractionation (FFF), fluorescence spectroscopy, fluorescence microscopy and transmission electron microscopy (TEM) have been used to characterize trastuzumab samples diluted in 0.9% sodium chloride, a stable infusion solution, as well as in 5% dextrose (a solution prone to aggregation). When trastuzumab samples were injected in the FFF channel using a standard separation method, no difference could be seen between trastuzumab diluted in sodium chloride and trastuzumab diluted in dextrose. However, during FFF measurements made with appropriate protocols, aggregates were detected in 5% dextrose. The parameters enabling the detection of reversible trastuzumab aggregates are described. Aggregates could also be documented by fluorescence microscopy and TEM. Fluorescence spectroscopy data were indicative of conformational changes consistent with increased aggregation and adsorption to surfaces. The analytical methods presented in this study were able to detect and characterize trastuzumab aggregates. PMID:20061815

Composition, buoyancy regulation and fate of ice algal aggregates in the Central Arctic Ocean.

PubMed

Fernández-Méndez, Mar; Wenzhöfer, Frank; Peeken, Ilka; Sørensen, Heidi L; Glud, Ronnie N; Boetius, Antje

2014-01-01

Sea-ice diatoms are known to accumulate in large aggregates in and under sea ice and in melt ponds. There is recent evidence from the Arctic that such aggregates can contribute substantially to particle export when sinking from the ice. The role and regulation of microbial aggregation in the highly seasonal, nutrient- and light-limited Arctic sea-ice ecosystem is not well understood. To elucidate the mechanisms controlling the formation and export of algal aggregates from sea ice, we investigated samples taken in late summer 2011 and 2012, during two cruises to the Eurasian Basin of the Central Arctic Ocean. Spherical aggregates densely packed with pennate diatoms, as well as filamentous aggregates formed by Melosira arctica showed sign of different stages of degradation and physiological stoichiometries, with carbon to chlorophyll a ratios ranging from 110 to 66700, and carbon to nitrogen molar ratios of 8-35 and 9-40, respectively. Sub-ice algal aggregate densities ranged between 1 and 17 aggregates m(-2), maintaining an estimated net primary production of 0.4-40 mg C m(-2) d(-1), and accounted for 3-80% of total phototrophic biomass and up to 94% of local net primary production. A potential factor controlling the buoyancy of the aggregates was light intensity, regulating photosynthetic oxygen production and the amount of gas bubbles trapped within the mucous matrix, even at low ambient nutrient concentrations. Our data-set was used to evaluate the distribution and importance of Arctic algal aggregates as carbon source for pelagic and benthic communities.

Composition, Buoyancy Regulation and Fate of Ice Algal Aggregates in the Central Arctic Ocean

PubMed Central

Fernández-Méndez, Mar; Wenzhöfer, Frank; Peeken, Ilka; Sørensen, Heidi L.; Glud, Ronnie N.; Boetius, Antje

2014-01-01

Sea-ice diatoms are known to accumulate in large aggregates in and under sea ice and in melt ponds. There is recent evidence from the Arctic that such aggregates can contribute substantially to particle export when sinking from the ice. The role and regulation of microbial aggregation in the highly seasonal, nutrient- and light-limited Arctic sea-ice ecosystem is not well understood. To elucidate the mechanisms controlling the formation and export of algal aggregates from sea ice, we investigated samples taken in late summer 2011 and 2012, during two cruises to the Eurasian Basin of the Central Arctic Ocean. Spherical aggregates densely packed with pennate diatoms, as well as filamentous aggregates formed by Melosira arctica showed sign of different stages of degradation and physiological stoichiometries, with carbon to chlorophyll a ratios ranging from 110 to 66700, and carbon to nitrogen molar ratios of 8–35 and 9–40, respectively. Sub-ice algal aggregate densities ranged between 1 and 17 aggregates m−2, maintaining an estimated net primary production of 0.4–40 mg C m−2 d−1, and accounted for 3–80% of total phototrophic biomass and up to 94% of local net primary production. A potential factor controlling the buoyancy of the aggregates was light intensity, regulating photosynthetic oxygen production and the amount of gas bubbles trapped within the mucous matrix, even at low ambient nutrient concentrations. Our data-set was used to evaluate the distribution and importance of Arctic algal aggregates as carbon source for pelagic and benthic communities. PMID:25208058

Active management of labor

PubMed Central

Rogers, Rebecca G; Gardner, Michael O; Tool, Kevin J; Ainsley, Jeanne; Gilson, George

2000-01-01

Objective To compare the costs of a protocol of active management of labor with those of traditional labor management. Design Cost analysis of a randomized controlled trial. Methods From August 1992 to April 1996, we randomly allocated 405 women whose infants were delivered at the University of New Mexico Health Sciences Center, Albuquerque, to an active management of labor protocol that had substantially reduced the duration of labor or a control protocol. We calculated the average cost for each delivery, using both actual costs and charges. Results The average cost for women assigned to the active management protocol was $2,480.79 compared with an average cost of $2,528.61 for women in the control group (P = 0.55). For women whose infant was delivered by cesarean section, the average cost was $4,771.54 for active management of labor and $4,468.89 for the control protocol (P = 0.16). Spontaneous vaginal deliveries cost an average of $27.00 more for actively managed patients compared with the cost for the control protocol. Conclusions The reduced duration of labor by active management did not translate into significant cost savings. Overall, an average cost saving of only $47.91, or 2%, was achieved for labors that were actively managed. This reduction in cost was due to a decrease in the rate of cesarean sections in women whose labor was actively managed and not to a decreased duration of labor. PMID:10778374

75 FR 67776 - Comment Request; Review of Productivity Statistics

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-03

... DEPARTMENT OF LABOR Bureau of Labor Statistics Comment Request; Review of Productivity Statistics... Statistics (BLS) is responsible for publishing measures of labor productivity and multifactor productivity..., Office of Productivity and Technology, Bureau of Labor Statistics, Room 2150, 2 Massachusetts Avenue, NE...

Labor length among overweight and obese women undergoing induction of labor.

PubMed

Hirshberg, Adi; Levine, Lisa D; Srinivas, Sindhu

2014-11-01

Maternal weight is thought to impact labor. With rising rates of obesity and inductions, we sought to evaluate labor times among induced women by body mass index (BMI) category. Retrospective cohort study of term inductions from 2005 to 2010. BMI categories were: normal weight (NW), overweight (OW), and obese (Ob) (18.5-24.9, 25-29.9, ≥30 kg/m(2)). Kruskal-Wallis tests compared median latent labor (LL) length and active labor (AL) length. Chi-square determined associations. Multivariable logistic regression controlled for confounders. Analyses were stratified by parity. A total of 448 inductions were analyzed. For nulliparas, there was no difference in LL by BMI category (p = 0.22). However, OW nulliparas had a longer AL compared to NW and Ob nulliparas (3.2, 1.7, 2.0 h, p = 0.005). For multiparas, NW had the shortest LL (5.5 h, p = 0.025) with no difference in AL among BMI categories (p = 0.42). The overall cesarean rate was 23% with no difference by BMI category (p = 0.95). However, Ob women had a greater percentage of first stage cesareans (41%) and NW had a greater percentage of second stage cesareans (55%), p = 0.06. The association between BMI and labor length among inductions differs by phase of labor and parity. BMI also influences the stage of labor in which a cesarean occurs.

Feasibility Study on Manufacturing Lightweight Aggregates from Water Purification Sludge

NASA Astrophysics Data System (ADS)

Peng, Ching-Fang; Chen, How-Ji

2018-02-01

This study mainly discussed the feasibility of manufacturing lightweight aggregates from water purification sludge in Taiwan. They were analysed for the physical and chemical composition before the sintering test for lightweight aggregates in a laboratory. Then the physical and mechanical properties of the synthesized aggregates were assessed. The result showed that the chemical composition of sludge in the water purification plants was within the appropriate range for manufacturing lightweight aggregate as proposed in the literature. The sintering test demonstrated that the particle density of aggregates from the ten types of water purification sludge were mostly less than 1.8 g/cm3. In addition, the dry unit weight, the organic impurity, the ignition loss, and other characteristics of synthesized aggregates met the requirement of CNS standards, while its water absorption and crushing strength also fulfilled the general commercial specifications. Therefore, reclamation of water purification sludge for production of lightweight aggregate is indeed feasible.

Rydberg aggregates

NASA Astrophysics Data System (ADS)

Wüster, S.; Rost, J.-M.

2018-02-01

We review Rydberg aggregates, assemblies of a few Rydberg atoms exhibiting energy transport through collective eigenstates, considering isolated atoms or assemblies embedded within clouds of cold ground-state atoms. We classify Rydberg aggregates, and provide an overview of their possible applications as quantum simulators for phenomena from chemical or biological physics. Our main focus is on flexible Rydberg aggregates, in which atomic motion is an essential feature. In these, simultaneous control over Rydberg-Rydberg interactions, external trapping and electronic energies, allows Born-Oppenheimer surfaces for the motion of the entire aggregate to be tailored as desired. This is illustrated with theory proposals towards the demonstration of joint motion and excitation transport, conical intersections and non-adiabatic effects. Additional flexibility for quantum simulations is enabled by the use of dressed dipole-dipole interactions or the embedding of the aggregate in a cold gas or Bose-Einstein condensate environment. Finally we provide some guidance regarding the parameter regimes that are most suitable for the realization of either static or flexible Rydberg aggregates based on Li or Rb atoms. The current status of experimental progress towards enabling Rydberg aggregates is also reviewed.

Production of lightweight aggregates from mining residues, heavy metal sludge, and incinerator fly ash.

PubMed

Huang, Su-Chen; Chang, Fang-Chih; Lo, Shang-Lien; Lee, Ming-Yu; Wang, Chu-Fang; Lin, Jyh-Dong

2007-06-01

In this study, artificial lightweight aggregate (LWA) manufactured from recycled resources was investigated. Residues from mining, fly ash from an incinerator and heavy metal sludge from an electronic waste water plant were mixed into raw aggregate pellets and fed into a tunnel kiln to be sintered and finally cooled rapidly. Various feeding and sintering temperatures were employed to examine their impact on the extent of vitrification on the aggregate surface. Microstructural analysis and toxicity characteristic leaching procedure (TCLP) were also performed. The results show that the optimum condition of LWA fabrication is sintering at 1150 degrees C for 15 min with raw aggregate pellets fed at 750 degrees C. The rapidly vitrified surface envelops the gas produced with the increase in internal temperature and cooling by spraying water prevents the aggregates from binding together, thus forming LWA with specific gravity of 0.6. LWA produced by sintering in tunnel kiln shows good vitrified surface, low water absorption rate below 5%, and low cylindrical compressive strength of 4.3 MPa. In addition, only trace amounts of heavy metals were detected, making the LWA non-hazardous for construction use.

Sustainable management and supply of natural and recycled aggregates in a medium-size integrated plant.

PubMed

Faleschini, Flora; Zanini, Mariano Angelo; Pellegrino, Carlo; Pasinato, Stefano

2016-03-01

The consumption of natural aggregates in civil engineering applications can cause severe environmental impacts on a regional scale, depleting the stock of bulk resources within a territory. Several methods can improve the environmental sustainability of the whole aggregates' supply process, including natural and recycled aggregates' productive chains, for instance promoting the use of recycled aggregates (RA). However, when quarrying and recycling activities are considered as stand-alone processes, also the RA supply chain may not be as sustainable as expected, due to the high environmental loads associated to transportation, if high distances from the production to the use sites are involved. This work gives some insights on the environmental impact assessment of the aggregates' industry in the Italian context, through a comparative assessment of the environmental loads of natural and recycled aggregates' productive chains. An integrated plant for the extraction of virgin aggregates and recycling of construction and demolition waste (C&DW) was analyzed as significant case study, with the aim to identify the influence of sustainable solutions on the overall emissions of the facility. A Life Cycle Assessment (LCA) approach was used, using site-specific data and paying particular attention on transportation-related impacts, land use, avoided landfill and non-renewable resources preservation. From this work it was possible to evaluate the influence of transportation and PV energy use on the overall environmental emissions of natural and recycled aggregates' productive chains. Copyright © 2016 Elsevier Ltd. All rights reserved.

Bt cotton and employment effects for female agricultural laborers in Pakistan.

PubMed

Kouser, Shahzad; Abedullah; Qaim, Matin

2017-01-25

The literature about economic and social impacts of Bt cotton adoption on farm households in developing countries is growing. Yet, there is still uncertainty about wider implications of this technology for rural development, including effects for landless rural laborers. Bt-related yield advantages may lead to intensified production and higher demand for labor. Building on farm survey data collected in Pakistan and using double-hurdle regression models, we analyze employment effects of Bt cotton adoption. Model estimates show that Bt adoption has increased the demand for hired labor by 55%. Manual harvesting, which is common in Pakistan, is a labor-intensive activity primarily carried out by female laborers. Accordingly, gender disaggregation shows that the employment-generating effects are particularly strong for women, who often belong to the most disadvantaged groups of rural societies. These results suggest that Bt technology can contribute to additional employment income for the poor and to more equitable rural development. Copyright © 2016 Elsevier B.V. All rights reserved.

Preterm induction of labor: predictors of vaginal delivery and labor curves.

PubMed

Feghali, Maisa; Timofeev, Julia; Huang, Chun-Chih; Driggers, Rita; Miodovnik, Menachem; Landy, Helain J; Umans, Jason G

2015-01-01

The purpose of this study was to evaluate the labor curves of patients who undergo preterm induction of labor (IOL) and to assess possible predictors of vaginal delivery (VD). Data from the National Institute of Child Health and Human Development Consortium on Safe Labor were analyzed. A total of 6555 women who underwent medically indicated IOL at <37 weeks of gestation were included in this analysis. Patients were divided into 4 groups based on gestational age (GA): group A, 24-27+6 weeks; B, 28-30+6 weeks; C, 31-33+6 weeks; and D, 34-36+6 weeks. Pregnant women with a contraindication to VD, IOL ≥37 weeks of gestation, and without data from cervical examination on admission were excluded. Analysis of variance was used to assess differences between GA groups. Multiple logistic regression was used to assess predictors of VD. A repeated measures analysis was used to determine average labor curves. Rates of vaginal live births increased with GA, from 35% (group A) to 76% (group D). Parous women (odds ratio, 6.78; 95% confidence interval, 6.38-7.21) and those with a favorable cervix at the start of IOL (odds ratio, 2.35; 95% confidence interval, 2.23-2.48) were more likely to deliver vaginally. Analysis of labor curves in nulliparous women showed shorter duration of labor with increasing GA; the active phase of labor was, however, similar across all GAs. Most women who undergo medically indicated preterm IOL between 24 and 36+6 weeks of gestation deliver vaginally. The strongest predictor of VD was parity. Preterm IOL had a limited influence on estimated labor curves across GAs. Copyright © 2015 Elsevier Inc. All rights reserved.

Labor Certifications

ERIC Educational Resources Information Center

Kaye, Allen E.

1978-01-01

The U.S. Immigration and Nationality Act requires that those aliens who wish to obtain U.S. immigrant visas and who intend to be permanently employed here to obtain a certification from the U.S. Secretary of Labor. Certain aliens are exempt from this requirement. Those not exempt must follow the labor certification process. (NQ)

Microbial community dynamics in soil aggregates shape biogeochemical gas fluxes from soil profiles - upscaling an aggregate biophysical model.

PubMed

Ebrahimi, Ali; Or, Dani

2016-09-01

Microbial communities inhabiting soil aggregates dynamically adjust their activity and composition in response to variations in hydration and other external conditions. These rapid dynamics shape signatures of biogeochemical activity and gas fluxes emitted from soil profiles. Recent mechanistic models of microbial processes in unsaturated aggregate-like pore networks revealed a highly dynamic interplay between oxic and anoxic microsites jointly shaped by hydration conditions and by aerobic and anaerobic microbial community abundance and self-organization. The spatial extent of anoxic niches (hotspots) flicker in time (hot moments) and support substantial anaerobic microbial activity even in aerated soil profiles. We employed an individual-based model for microbial community life in soil aggregate assemblies represented by 3D angular pore networks. Model aggregates of different sizes were subjected to variable water, carbon and oxygen contents that varied with soil depth as boundary conditions. The study integrates microbial activity within aggregates of different sizes and soil depth to obtain estimates of biogeochemical fluxes from the soil profile. The results quantify impacts of dynamic shifts in microbial community composition on CO2 and N2 O production rates in soil profiles in good agreement with experimental data. Aggregate size distribution and the shape of resource profiles in a soil determine how hydration dynamics shape denitrification and carbon utilization rates. Results from the mechanistic model for microbial activity in aggregates of different sizes were used to derive parameters for analytical representation of soil biogeochemical processes across large scales of practical interest for hydrological and climate models. © 2016 John Wiley & Sons Ltd.

Military duty: risk factor for preterm labor? A review.

PubMed

McNeary, A M; Lomenick, T S

2000-08-01

The female military population represents a high-risk group for preterm labor and other adverse pregnancy outcomes. As the number of women entering the armed forces continues to increase, concerns regarding the effects of military service on pregnancy must persist. Although active duty females have access to prenatal care and maintain consistent follow-up, previous research has noted a 5-fold increase in preterm labor compared with civilian working women. Hospitalization and loss of work attributable to pregnancy complications directly affect productivity and mission accomplishment; therefore, it is crucial to identify those at risk to institute measures that will prevent such occurrences and decrease time away from work. This article provides a review of the existing literature concerning preterm labor in military women, comparisons with the civilian population, and recommendations for future research.

Origins of the Sexual Division of Labor.

ERIC Educational Resources Information Center

Leibowitz, Lila

An interactive, biosocial model of early hominids presents evidence that physical sex differences are not the basis for the sexual division of labor as is commonly believed. Production (the deliberate collection and distribution of food) developed among early hominids as a prerequisite for survival. Although the population appears to have had…

Floating ice-algal aggregates below melting arctic sea ice.

PubMed

Assmy, Philipp; Ehn, Jens K; Fernández-Méndez, Mar; Hop, Haakon; Katlein, Christian; Sundfjord, Arild; Bluhm, Katrin; Daase, Malin; Engel, Anja; Fransson, Agneta; Granskog, Mats A; Hudson, Stephen R; Kristiansen, Svein; Nicolaus, Marcel; Peeken, Ilka; Renner, Angelika H H; Spreen, Gunnar; Tatarek, Agnieszka; Wiktor, Jozef

2013-01-01

During two consecutive cruises to the Eastern Central Arctic in late summer 2012, we observed floating algal aggregates in the melt-water layer below and between melting ice floes of first-year pack ice. The macroscopic (1-15 cm in diameter) aggregates had a mucous consistency and were dominated by typical ice-associated pennate diatoms embedded within the mucous matrix. Aggregates maintained buoyancy and accumulated just above a strong pycnocline that separated meltwater and seawater layers. We were able, for the first time, to obtain quantitative abundance and biomass estimates of these aggregates. Although their biomass and production on a square metre basis was small compared to ice-algal blooms, the floating ice-algal aggregates supported high levels of biological activity on the scale of the individual aggregate. In addition they constituted a food source for the ice-associated fauna as revealed by pigments indicative of zooplankton grazing, high abundance of naked ciliates, and ice amphipods associated with them. During the Arctic melt season, these floating aggregates likely play an important ecological role in an otherwise impoverished near-surface sea ice environment. Our findings provide important observations and measurements of a unique aggregate-based habitat during the 2012 record sea ice minimum year.

Floating Ice-Algal Aggregates below Melting Arctic Sea Ice

PubMed Central

Assmy, Philipp; Ehn, Jens K.; Fernández-Méndez, Mar; Hop, Haakon; Katlein, Christian; Sundfjord, Arild; Bluhm, Katrin; Daase, Malin; Engel, Anja; Fransson, Agneta; Granskog, Mats A.; Hudson, Stephen R.; Kristiansen, Svein; Nicolaus, Marcel; Peeken, Ilka; Renner, Angelika H. H.; Spreen, Gunnar; Tatarek, Agnieszka; Wiktor, Jozef

2013-01-01

During two consecutive cruises to the Eastern Central Arctic in late summer 2012, we observed floating algal aggregates in the melt-water layer below and between melting ice floes of first-year pack ice. The macroscopic (1-15 cm in diameter) aggregates had a mucous consistency and were dominated by typical ice-associated pennate diatoms embedded within the mucous matrix. Aggregates maintained buoyancy and accumulated just above a strong pycnocline that separated meltwater and seawater layers. We were able, for the first time, to obtain quantitative abundance and biomass estimates of these aggregates. Although their biomass and production on a square metre basis was small compared to ice-algal blooms, the floating ice-algal aggregates supported high levels of biological activity on the scale of the individual aggregate. In addition they constituted a food source for the ice-associated fauna as revealed by pigments indicative of zooplankton grazing, high abundance of naked ciliates, and ice amphipods associated with them. During the Arctic melt season, these floating aggregates likely play an important ecological role in an otherwise impoverished near-surface sea ice environment. Our findings provide important observations and measurements of a unique aggregate-based habitat during the 2012 record sea ice minimum year. PMID:24204642

[Labor legislation reform: law 50 of 1990. The context of the reform].

PubMed

Yanuzova, M

1991-12-01

Labor legislation reforms contained in Law 50 of 1990 were intended to facilitate international opening of Colombia's economy, which has been beset by external debt, an absence of foreign investment, technological backwardness, and low productivity. The weakness of the labor movement, aggravated by the failure of the socialist economic model and its power organization, made possible a dismantling of past labor victories. The labor reform is intended to combat stagnation in productivity which is believed by the government to result from labor instability; to create a climate permitting generation of employment, and to adapt internal labor laws to recommendations of the International Labour Organization. The effort to make labor legislation more flexible and more adaptable to market conditions removed some protectionist measures and facilitated firing or laying off of workers. Several categories of workers were removed from the jurisdiction of labor laws and placed under the jurisdiction of civil law and ultimately of market forces. The new labor law will lead to salary reductions for most workers. A 36-hour work week without overtime was created for new enterprises as a strategy to encourage job creation. The principle that labor laws should protect workers because of their unequal power relative to employers has been suppressed in the new legislation. Although it is too early to draw definite conclusions about the effect of the law on women workers, some effects are predictable. The liberating power of employment for married women has been limited in Colombia as in many other countries because women are expected to carry out their full traditional domestic role in addition to their paid employment. Women's status in the workplace has improved considerably over the past 50 years, but they still have higher unemployment rates than men, receive lower wages, and are concentrated in less skilled jobs and the informal sector. Employment in the informal sector allows

29 CFR 401.9 - Labor organization.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 2 2010-07-01 2010-07-01 false Labor organization. 401.9 Section 401.9 Labor Regulations... MEANING OF TERMS USED IN THIS SUBCHAPTER § 401.9 Labor organization. Labor organization means a labor organization engaged in an industry affecting commerce and includes any organization of any kind, any agency...

DYSREGULATION OF MATERNAL SERUM ADIPONECTIN IN PRETERM LABOR

PubMed Central

Mazaki-Tovi, Shali; Romero, Roberto; Vaisbuch, Edi; Erez, Offer; Mittal, Pooja; Chaiworapongsa, Tinnakorn; Kim, Sun Kwon; Pacora, Percy; Yeo, Lami; Gotsch, Francesca; Dong, Zhong; Nhan-Chang, Chia-Ling; Jodicke, Cristiano; Yoon, Bo Hyun; Hassan, Sonia S.; Kusanovic, Juan Pedro

2013-01-01

Objective Intra-amniotic and systemic infection/inflammation have been causally linked to preterm parturition and fetal injury. An emerging theme is that adipose tissue can orchestrate a metabolic response to insults, but also an inflammatory response via the production of adipocytokines, and that these two phenomenon are interrelated. Adiponectin, an insulin-sensitizing, anti-inflammatory adipocytokine, circulates in multimeric complexes including low-molecular-weight (LMW) trimers, medium-molecular-weight (MMW) hexamers and high-molecular-weight (HMW) isoforms. Each of these complexes can exert differential biological effects. The aim of this study was to determine whether spontaneous preterm labor (PTL) with intact membranes and intra-amniotic infection/inflammation (IAI) is associated with changes in maternal serum circulating adiponectin multimers. Study design This cross-sectional study included patients in the following groups: 1) normal pregnant women (n=158); 2) patients with an episode of preterm labor and intact membranes without IAI who delivered at term (n=41); 3) preterm labor without IAI who delivered preterm (n=27); and 4) preterm labor with IAI who delivered preterm (n=36). Serum adiponectin multimers (total, HMW, MMW and LMW) concentrations were determined by ELISA. Non-parametric statistics were used for analyses. Results 1) Preterm labor leading to preterm delivery or an episode of preterm labor which does not lead to preterm delivery, was associated with a lower median maternal serum concentration of total and HMW adiponectin, a lower median HMW/total adiponectin ratio, and a higher median LMW/total adiponectin ratio than normal pregnancy; 2) among patients with preterm labor, those with IAI had the lowest median concentration of total and HMW adiponectin, as well as the lowest median HMW/total adiponectin ratio; 3) The changes in maternal adiponectin and adiponectin multimers remained significant after adjusting for confounding factors such as

29 CFR 401.13 - Labor relations consultant.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 2 2010-07-01 2010-07-01 false Labor relations consultant. 401.13 Section 401.13 Labor Regulations Relating to Labor OFFICE OF LABOR-MANAGEMENT STANDARDS, DEPARTMENT OF LABOR LABOR-MANAGEMENT STANDARDS MEANING OF TERMS USED IN THIS SUBCHAPTER § 401.13 Labor relations consultant. Labor relations...

29 CFR 500.41 - Farm labor contractor is responsible for actions of his farm labor contractor employee.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., prior to such employee's engagement in any activity enumerated in section 3(6) of the Act. A farm labor... farm labor contractor employee. 500.41 Section 500.41 Labor Regulations Relating to Labor (Continued... PROTECTION Registration of Farm Labor Contractors and Employees of Farm Labor Contractors Engaged in Farm...

29 CFR 500.41 - Farm labor contractor is responsible for actions of his farm labor contractor employee.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., prior to such employee's engagement in any activity enumerated in section 3(6) of the Act. A farm labor... farm labor contractor employee. 500.41 Section 500.41 Labor Regulations Relating to Labor (Continued... PROTECTION Registration of Farm Labor Contractors and Employees of Farm Labor Contractors Engaged in Farm...

Monitoring Insulin Aggregation via Capillary Electrophoresis

PubMed Central

Pryor, Elizabeth; Kotarek, Joseph A.; Moss, Melissa A.; Hestekin, Christa N.

2011-01-01

Early stages of insulin aggregation, which involve the transient formation of oligomeric aggregates, are an important aspect in the progression of Type II diabetes and in the quality control of pharmaceutical insulin production. This study is the first to utilize capillary electrophoresis (CE) with ultraviolet (UV) detection to monitor insulin oligomer formation at pH 8.0 and physiological ionic strength. The lag time to formation of the first detected species in the aggregation process was evaluated by UV-CE and thioflavin T (ThT) binding for salt concentrations from 100 mM to 250 mM. UV-CE had a significantly shorter (5–8 h) lag time than ThT binding (15–19 h). In addition, the lag time to detection of the first aggregated species via UV-CE was unaffected by salt concentration, while a trend toward an increased lag time with increased salt concentration was observed with ThT binding. This result indicates that solution ionic strength impacts early stages of aggregation and β-sheet aggregate formation differently. To observe whether CE may be applied for the analysis of biological samples containing low insulin concentrations, the limit of detection using UV and laser induced fluorescence (LIF) detection modes was determined. The limit of detection using LIF-CE, 48.4 pM, was lower than the physiological insulin concentration, verifying the utility of this technique for monitoring biological samples. LIF-CE was subsequently used to analyze the time course for fluorescein isothiocyanate (FITC)-labeled insulin oligomer formation. This study is the first to report that the FITC label prevented incorporation of insulin into oligomers, cautioning against the use of this fluorescent label as a tag for following early stages of insulin aggregation. PMID:22272138

Silicone Oil- and Agitation-Induced Aggregation of a Monoclonal Antibody in Aqueous Solution

PubMed Central

Thirumangalathu, Renuka; Krishnan, Sampathkumar; Ricci, Margaret Speed; Brems, David N.; Randolph, Theodore W.; Carpenter, John F.

2009-01-01

Silicone oil, which is used as a lubricant or coating in devices such as syringes, needles and pharmaceutical containers, has been implicated in aggregation and particulation of proteins and antibodies. Aggregation of therapeutic protein products induced by silicone oil can pose a challenge to their development and commercialization. To systematically characterize the role of silicone oil on protein aggregation, the effects of agitation, temperature, pH and ionic strength on silicone oil-induced loss of monomeric anti-streptavidin IgG 1 antibody were examined. Additionally, the influences of excipients polysorbate20 and sucrose on protein aggregation were investigated. In the absence of agitation, protein absorbed to silicone oil with approximately monolayer coverage, however silicone oil did not stimulate aggregation during isothermal incubation unless samples were also agitated. A synergistic stimulation of aggregation by a combination of agitation and silicone oil was observed. Solution conditions which reduced colloidal stability of the antibody, as assessed by determination of osmotic second virial coefficients, accelerated aggregation during agitation with silicone oil. Polysorbate20 completely inhibited silicone oil-induced monomer loss during agitation. A formulation strategy optimizing colloidal stability of the antibody as well as incorporation of surfactants such as polysorbate20 is proposed to reduce silicone oil-induced aggregation of therapeutic protein products. PMID:19360857

How to Tell When Labor Begins

MedlinePlus

... labor? • How can I tell the difference between true labor and false labor? What happens when labor ... Your uterus may contract off and on before “true” labor begins. These irregular contractions are called false ...

IT Solution concept development for tracking and analyzing the labor effectiveness of employees

NASA Astrophysics Data System (ADS)

Ilin, Igor; Shirokova, Svetlana; Lepekhin, Aleksandr

2018-03-01

Labor efficiency and productivity of employees is an important aspect for the environment within any type of organization. This is particularly crucial factor for the companies, if which operations are associated with physical labor, such as construction companies. Productivity and efficiency are both very complicated concepts and a huge variety of methods and approaches to its analysis can be implemented within the organization. Despite that, it is important to choose the methods, which not only analyze the key performance indicators of employee, but take into account personal indicators, which might affect performance even more than professional skills. For this complicated analysis task it is important to build IT solution for tracking and analyzing of the labor effectiveness. The concept for designing this IT solution is proposed in the current research.

Labor Economists Get Their Microscope: Big Data and Labor Market Analysis.

PubMed

Horton, John J; Tambe, Prasanna

2015-09-01

This article describes how the fine-grained data being collected by Internet labor market intermediaries, such as employment websites, online labor markets, and knowledge discussion boards, are providing new research opportunities and directions for the empirical analysis of labor market activity. After discussing these data sources, we examine some of the research opportunities they have created, highlight some examples of existing work that already use these new data sources, and enumerate the challenges associated with the use of these corporate data sources.

Advances in labor analgesia

PubMed Central

Wong, Cynthia A

2010-01-01

The pain of childbirth is arguably the most severe pain most women will endure in their lifetimes. The pain of the early first stage of labor arises from dilation of the lower uterine segment and cervix. Pain from the late first stage and second stage of labor arises from descent of the fetus in the birth canal, resulting in distension and tearing of tissues in the vagina and perineum. An array of regional nerve blocks, systemic analgesic, and nonpharmacologic techniques are currently used for labor analgesia. Nonpharmacologic methods are commonly used, but the effectiveness of these techniques generally lacks rigorous scientific study. Continuous labor support has been shown to decrease the use of pharmacologic analgesia and shorten labor. Intradermal water injections decrease back labor pain. Neuraxial labor analgesia (most commonly epidural or combined spinal-epidural) is the most effective method of pain relief during childbirth, and the only method that provides complete analgesia without maternal or fetal sedation. Current techniques commonly combine a low dose of local anesthetic (bupivacaine or ropivacaine) with a lipid soluble opioid (fentanyl or sufentanil). Neuraxial analgesia does not increase the rate of cesarean delivery compared to systemic opioid analgesia; however, dense neuraxial analgesia may increase the risk of instrumental vaginal delivery. PMID:21072284

Effect of additives on mineral trioxide aggregate setting reaction product formation.

PubMed

Zapf, Angela M; Chedella, Sharath C V; Berzins, David W

2015-01-01

Mineral trioxide aggregate (MTA) sets via hydration of calcium silicates to yield calcium silicate hydrates and calcium hydroxide (Ca[OH]2). However, a drawback of MTA is its long setting time. Therefore, many additives have been suggested to reduce the setting time. The effect those additives have on setting reaction product formation has been ignored. The objective was to examine the effect additives have on MTA's setting time and setting reaction using differential scanning calorimetry (DSC). MTA powder was prepared with distilled water (control), phosphate buffered saline, 5% calcium chloride (CaCl2), 3% sodium hypochlorite (NaOCl), or lidocaine in a 3:1 mixture and placed in crucibles for DSC evaluation. The setting exothermic reactions were evaluated at 37°C for 8 hours to determine the setting time. Separate samples were stored and evaluated using dynamic DSC scans (37°C→640°C at10°C/min) at 1 day, 1 week, 1 month, and 3 months (n = 9/group/time). Dynamic DSC quantifies the reaction product formed from the amount of heat required to decompose it. Thermographic peaks were integrated to determine enthalpy, which was analyzed with analysis of variance/Tukey test (α = 0.05). Isothermal DSC identified 2 main exothermal peaks occurring at 44 ± 12 and 343 ± 57 minutes for the control. Only the CaCl2 additive was an accelerant, which was observed by a greater exothermic peak at 101 ± 11 minutes, indicating a decreased setting time. The dynamic DSC scans produced an endothermic peak around 450°C-550°C attributed to Ca(OH)2 decomposition. The use of a few additives (NaOCl and lidocaine) resulted in significantly less Ca(OH)2 product formation. DSC was used to discriminate calcium hydroxide formation in MTA mixed with various additives and showed NaOCl and lidocaine are detrimental to MTA reaction product formation, whereas CaCl2 accelerated the reaction. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Lipopolysaccharide treatment reduces rat platelet aggregation independent of intracellular reactive-oxygen species generation.

PubMed

Lopes-Pires, M Elisa; Casarin, André L; Pereira-Cunha, Fernanda G; Lorand-Metze, Irene; Antunes, Edson; Marcondes, Sisi

2012-01-01

High production of reactive-oxygen species (ROS) by blood cells is involved in damage of the vascular endothelium and multiple organ dysfunction in sepsis. However, little is known about the intraplatelet ROS production in sepsis and its consequences on platelet reactivity. In this study, we evaluated whether the treatment of rats with lipopolysaccharide (LPS) affects platelet aggregation through intraplatelet ROS generation. Rats were injected with LPS (1 mg/kg, i.p.), and at 2 to 72 h thereafter, adenosine diphosphate (ADP) (3-10 µM) induced platelet aggregation was evaluated. Production of ROS in platelets was measured by flow cytometry using 2',7'-dichlorofluorescein diacetate (DCFH-DA). Treatment of rats with LPS time-dependently inhibited ADP-induced platelet aggregation within 72 h. The inhibitory effect of LPS on platelet aggregation was further increased when the platelets were incubated with polyethylene glycol-superoxide dismutase (PEG-SOD; 30 U/mL), polyethylene glycol-catalase (PEG-CAT; 1000 U/mL) or the NADPH oxidase inhibitor diphenyleneiodonium (DPI; 10 µM). The ROS production in non-stimulated platelets did not differ between control and LPS-treated rats. However, in ADP-activated platelets, generation of ROS was increased by 3.0- and 7.0-fold, as evaluated at 8 and 48 h after LPS injection, respectively. This increased ROS production was significantly reduced when platelets were incubated in vitro with DPI, PEG-SOD or PEG-CAT. In contrast, treatment of rats with N-acetylcysteine (150 mg/kg, i.p.) significantly reduced the inhibitory effect of LPS on platelet aggregation, and prevented the increased ROS production by in vivo LPS. Our results indicate that the increased intraplatelet ROS production does not contribute to the inhibitory effect of LPS on platelet aggregation; however, the maintenance of redox balance in LPS-treated rats is fundamental to restore the normal platelet response in these animals.

The aggregation paths and products of Aβ42 dimers are distinct from Aβ42 monomer

PubMed Central

O'Malley, Tiernan T.; Witbold, William M.; Linse, Sara; Walsh, Dominic M.

2017-01-01

Extracts of Alzheimer's disease (AD) brain that contain what appear to be SDS-stable amyloid β-protein (Aβ) dimers potently block LTP and impair memory consolidation. Brain-derived dimers can be physically separated from Aβ monomer, consist primarily of Aβ42 and resist denaturation by powerful chaotropic agents. In nature, covalently cross-linked Aβ dimers could be generated in only one of two different ways - either by the formation of a dityrosine (DiY) or an isopeptide ε-(γ-glutamyl)-lysine (Q-K) bond. We enzymatically cross-linked recombinant Aβ42 monomer to produce DiY and Q-K dimers and then applied a range of biophysical methods to study their aggregation. Both Q-K and DiY dimers aggregate to form soluble assemblies distinct from the fibrillar aggregates formed by Aβ monomer. These results suggest that Aβ dimers allow the formation of soluble aggregates akin to those in aqueous extracts of AD brain. Thus it seems that Aβ dimers may play an important role in determining the formation of soluble rather than insoluble aggregates. PMID:27750419

Thermal Aggregation of Calcium-Fortified Skim Milk Enhances Probiotic Protection during Convective Droplet Drying.

PubMed

Wang, Juan; Huang, Song; Fu, Nan; Jeantet, Romain; Chen, Xiao Dong

2016-08-03

Probiotic bacteria have been reported to confer benefits on hosts when delivered in an adequate dose. Spray-drying is expected to produce dried and microencapsulated probiotic products due to its low production cost and high energy efficiency. The bottleneck in probiotic application addresses the thermal and dehydration-related inactivation of bacteria during process. A protective drying matrix was designed by modifying skim milk with the principle of calcium-induced protein thermal aggregation. The well-defined single-droplet drying technique was used to monitor the droplet-particle conversion and the protective effect of this modified Ca-aggregated milk on Lactobacillus rhamnosus GG. The Ca-aggregated milk exhibited a higher drying efficiency and superior protection on L. rhamnosus GG during thermal convective drying. The mechanism was explained by the aggregation in milk, causing the lower binding of water in the serum phase and, conversely, local concentrated milk aggregates involved in bacteria entrapment in the course of drying. This work may open new avenues for the development of probiotic products with high bacterial viability and calcium enrichment.

Eco-friendly porous concrete using bottom ash aggregate for marine ranch application.

PubMed

Lee, Byung Jae; Prabhu, G Ganesh; Lee, Bong Chun; Kim, Yun Yong

2016-03-01

This article presents the test results of an investigation carried out on the reuse of coal bottom ash aggregate as a substitute material for coarse aggregate in porous concrete production for marine ranch applications. The experimental parameters were the rate of bottom ash aggregate substitution (30%, 50% and 100%) and the target void ratio (15%, 20% and 25%). The cement-coated granular fertiliser was substituted into a bottom ash aggregate concrete mixture to improve marine ranch applications. The results of leaching tests revealed that the bottom ash aggregate has only a negligible amount of the ten deleterious substances specified in the Ministry of Environment - Enforcement Regulation of the Waste Management Act of Republic Korea. The large amount of bubbles/air gaps in the bottom ash aggregate increased the voids of the concrete mixtures in all target void ratios, and decreased the compressive strength of the porous concrete mixture; however, the mixture substituted with 30% and 10% of bottom ash aggregate and granular fertiliser, respectively, showed an equal strength to the control mixture. The sea water resistibility of the bottom ash aggregate substituted mixture was relatively equal to that of the control mixture, and also showed a great deal of improvement in the degree of marine organism adhesion compared with the control mixture. No fatality of fish was observed in the fish toxicity test, which suggested that bottom ash aggregate was a harmless material and that the combination of bottom ash aggregate and granular fertiliser with substitution rates of 30% and 10%, respectively, can be effectively used in porous concrete production for marine ranch application. © The Author(s) 2015.

Aggregation of the Inflammatory S100A8 Precedes Aβ Plaque Formation in Transgenic APP Mice: Positive Feedback for S100A8 and Aβ Productions.

PubMed

Lodeiro, Maria; Puerta, Elena; Ismail, Muhammad-Al-Mustafa; Rodriguez-Rodriguez, Patricia; Rönnbäck, Annica; Codita, Alina; Parrado-Fernandez, Cristina; Maioli, Silvia; Gil-Bea, Francisco; Merino-Serrais, Paula; Cedazo-Minguez, Angel

2017-03-01

Inflammation plays an important role in Alzheimer's disease (AD) and other neurodegenerative disorders. Although chronic inflammation in later stages of AD is well described, little is known about the inflammatory processes in preclinical or early stages of the disease prior to plaque deposition. In this study, we report that the inflammatory mediator S100A8 is increased with aging in the mouse brain. It is observed as extracellular aggregates, which do not correspond to corpora amylacea. S100A8 aggregation is enhanced in the hippocampi of two different mouse models for amyloid-β (Aβ) overproduction (Tg2576 and TgAPParctic mice). S100A8 aggregates are seen prior the formation of Aβ plaques and do not colocalize. In vitro treatment of glial cells from primary cultures with Aβ42 resulted in an increased production of S100A8. In parallel, treatment of a neuronal cell line with recombinant S100A8 protein resulted in enhanced Aβ42 and decreased Aβ40 production. Our results suggest that important inflammatory processes are occurring prior to Aβ deposition and the existence of a positive feedback between S100A8 and Aβ productions. The possible relevance of aging- or AD-dependent formation of S100A8 aggregates in the hippocampus thus affecting learning and memory processes is discussed. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

[Active management of labor].

PubMed

Ruiz Ortiz, E; Villalobos Román, M; Flores Murrieta, G; Sotomayor Alvarado, L

1991-01-01

Eighty three primigravidae patients at the end of latency labor, erased cervix, 3 cm dilation, vertex presentation and adequate pelvis, were studied. Two groups were formed: 53 patients in the study group, who received active management of labor, and 30 patients in the control group, treated in the traditional way. In all the patients a graphic recording of labor, was carried out; it included all the events, and as labor advanced, a signoidal curve of cervical dilatation, was registered, as well as the hyperbolic one for presentation descent. The study group received the method in a systematized manner, as follows: 1. Peridular block. 2. Amniotomy. 3. IV oxytocin one hour after amniotomy. 4. FCR monitoring. 5. Detection of dystocia origin. Materno-fetal morbidity was registered in both groups, as well as cesarean section rate, instrumental delivery and its indications, labor duration, and time of stay in labor room. Diminution of above intems and opportune detection of dystocia, were determined. It was concluded that a constructive action plan, starting at hospital admission in most healthy women, allows a normal delivery of brief duration.

Paratransit Labor Issues

DOT National Transportation Integrated Search

1978-02-01

All paratransit services are labor intensive, second only to conventional taxis among transportation modes. As such, the manner in which the service is provided, the role of the labor force, and, in particular, the compensation afforded to drivers, h...

Coherent and incoherent ultrasound backscatter from cell aggregates.

PubMed

de Monchy, Romain; Destrempes, François; Saha, Ratan K; Cloutier, Guy; Franceschini, Emilie

2016-09-01

The effective medium theory (EMT) was recently developed to model the ultrasound backscatter from aggregating red blood cells [Franceschini, Metzger, and Cloutier, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 58, 2668-2679 (2011)]. The EMT assumes that aggregates can be treated as homogeneous effective scatterers, which have effective properties determined by the aggregate compactness and the acoustical characteristics of the cells and the surrounding medium. In this study, the EMT is further developed to decompose the differential backscattering cross section of a single cell aggregate into coherent and incoherent components. The coherent component corresponds to the squared norm of the average scattering amplitude from the effective scatterer, and the incoherent component considers the variance of the scattering amplitude (i.e., the mean squared norm of the fluctuation of the scattering amplitude around its mean) within the effective scatterer. A theoretical expression for the incoherent component based on the structure factor is proposed and compared with another formulation based on the Gaussian direct correlation function. This theoretical improvement is assessed using computer simulations of ultrasound backscatter from aggregating cells. The consideration of the incoherent component based on the structure factor allows us to approximate the simulations satisfactorily for a product of the wavenumber times the aggregate radius kr ag around 2.

Mechanical and Physical Properties of Hydrophobized Lightweight Aggregate Concrete with Sewage Sludge

PubMed Central

Suchorab, Zbigniew; Barnat-Hunek, Danuta; Franus, Małgorzata; Łagód, Grzegorz

2016-01-01

This article is focused on lightweight aggregate-concrete modified by municipal sewage sludge and lightweight aggregate-concrete obtained from light aggregates. The article presents laboratory examinations of material physical parameters. Water absorptivity of the examined material was decreased by the admixture of water emulsion of reactive polysiloxanes. Water transport properties were determined using Time Domain Reflectometry, an indirect technique for moisture detection in porous media. Together with basic physical parameters, the heat conductivity coefficient λ was determined for both types of lightweight aggregate-concrete. Analysis of moisture and heat properties of the examined materials confirmed the usefulness of light aggregates supplemented with sewage sludge for prospective production. PMID:28773442

Mechanical and Physical Properties of Hydrophobized Lightweight Aggregate Concrete with Sewage Sludge.

PubMed

Suchorab, Zbigniew; Barnat-Hunek, Danuta; Franus, Małgorzata; Łagód, Grzegorz

2016-04-27

This article is focused on lightweight aggregate-concrete modified by municipal sewage sludge and lightweight aggregate-concrete obtained from light aggregates. The article presents laboratory examinations of material physical parameters. Water absorptivity of the examined material was decreased by the admixture of water emulsion of reactive polysiloxanes. Water transport properties were determined using Time Domain Reflectometry, an indirect technique for moisture detection in porous media. Together with basic physical parameters, the heat conductivity coefficient λ was determined for both types of lightweight aggregate-concrete. Analysis of moisture and heat properties of the examined materials confirmed the usefulness of light aggregates supplemented with sewage sludge for prospective production.

The Thrifty Food Plan is not thrifty when labor cost is considered.

PubMed

Davis, George C; You, Wen

2010-04-01

Recent research has shown that the typical Supplemental Food Assistance Program (SNAP) family falls short in meeting the Thrifty Food Plan (TFP) nutritional guidelines that underlie the SNAP even when they typically have sufficient monetary resources to eat a healthful diet (i.e. to follow the TFP recommendations). However, the TFP does not consider labor cost. This study uses a basic labor economics technique to value labor in a home food production scenario that is required to reach the TFP nutrition and budget targets and calculates the total cost (inclusive of labor) associated with the TFP. This TFP consistent total cost is then compared, using several metrics, with the total cost associated with actual choices made by those families sharing the same profiles as current SNAP participants. Once labor is included, we find the TFP is not very thrifty and the mean household falls short of the TFP guidelines even with adequate monetary resources.

Identification of first-stage labor arrest by electromyography in term nulliparous women after induction of labor.

PubMed

Vasak, Blanka; Graatsma, Elisabeth M; Hekman-Drost, Elske; Eijkemans, Marinus J; Schagen van Leeuwen, Jules H; Visser, Gerard H A; Jacod, Benoit C

2017-07-01

Worldwide induction and cesarean delivery rates have increased rapidly, with consequences for subsequent pregnancies. The majority of intrapartum cesarean deliveries are performed for failure to progress, typically in nulliparous women at term. Current uterine registration techniques fail to identify inefficient contractions leading to first-stage labor arrest. An alternative technique, uterine electromyography has been shown to identify inefficient contractions leading to first-stage arrest of labor in nulliparous women with spontaneous onset of labor at term. The objective of this study was to determine whether this finding can be reproduced in induction of labor. Uterine activity was measured in 141 nulliparous women with singleton term pregnancies and a fetus in cephalic position during induced labor. Electrical activity of the myometrium during contractions was characterized by its power density spectrum. No significant differences were found in contraction characteristics between women with induced labor delivering vaginally with or without oxytocin and women with arrested labor with subsequent cesarean delivery. Uterine electromyography shows no correlation with progression of labor in induced labor, which is in contrast to spontaneous labor. © 2017 Nordic Federation of Societies of Obstetrics and Gynecology.

Geologic and societal factors affecting the international oceanic transport of aggregate

USGS Publications Warehouse

Langer, W.H.

1995-01-01

Crushed stone and sand and gravel are the two main sources of natural aggregate, and together comprise approximately half the volume and tonnage of mined material in the United States. Natural aggregate is a bulky, heavy material without special or unique properties, and it is commonly used near its source of production to minimize haulage cost. However, remoteness is no longer an absolute disqualifier for the production of aggregate. Today interstate aggregate routinely is shipped hundreds of kilometers by rail and barge. In addition, during 1992, the United States imported 1,317,000 metric tons of aggregate from Canada and 1,531,000 metric tons from Mexico. A number of ports on the Atlantic Coast and Gulf Coast of the United States receive imports of crushed stone from foreign sources for transport to various parts of the eastern United States. These areas either lack adequate supplies of aggregate or are augmenting their supplies because they have difficulties meeting current demand. These difficulties may include poor stone quality, environmental permitting problems, or transportation. Certain societal and geologic conditions of New York City and Philadelphia along the Atlantic Coast, and Tampa and New Orleans along the Gulf Coast, are discussed to demonstrate the different combinations of issues that contribute to the economic viability of importing crushed stone. ?? 1995 Oxford University Press.

Education, Health, and Labor Force Supply: Broadening Human Capital for National Development in Malawi

ERIC Educational Resources Information Center

Smith, William C.; Ikoma, Sakiko; Baker, David P.

2016-01-01

Education and health are both capital investments in national development, often viewed as independent factors on a country's labor force supply and productivity. This study uses the 2010-2011 Third Integrated Household Survey in Malawi to propose an Education-enhanced Health Human Capital (EHHC) model where education influences labor force supply…

Labor Markets in Imbalance: Review of Qualitative Evidence.

ERIC Educational Resources Information Center

Medoff, James L.; Wiener, Jonathan B.

Recent statistical investigations indicate that labor market imbalance has increased during the past decade and has had important deleterious effects on the nation's inflation and productivity growth records. A growing difficulty in filling skilled jobs at a given unemployment rate is reflected. Business community analysts attribute the growing…

The Effects of Different Fine Recycled Concrete Aggregates on the Properties of Mortar

PubMed Central

Fan, Cheng-Chih; Huang, Ran; Hwang, Howard; Chao, Sao-Jeng

2015-01-01

The practical use of recycled concrete aggregate produced by crushing concrete waste reduces the consumption of natural aggregate and the amount of concrete waste that ends up in landfills. This study investigated two methods used in the production of fine recycled concrete aggregate: (1) a method that produces fine as well as coarse aggregate, and (2) a method that produces only fine aggregate. Mortar specimens were tested using a variety of mix proportions to determine how the characteristics of fine recycled concrete aggregate affect the physical and mechanical properties of the resulting mortars. Our results demonstrate the superiority of mortar produced using aggregate produced using the second of the two methods. Nonetheless, far more energy is required to render concrete into fine aggregate than is required to produce coarse as well as fine aggregate simultaneously. Thus, the performance benefits of using only fine recycled concrete aggregate must be balanced against the increased impact on the environment.

The Interrelationship between Study of the Fundamentals of Science and the Labor Education of Rural Schoolchildren

ERIC Educational Resources Information Center

Nikolaev, M. A.

1975-01-01

In the rural school the tasks of polytechnical labor education are determined by the objective demands of scientific and technical progress in agricultural production, by its content, and by the nature of the labor of leading workers. (Author)

Use of Air-cooled Blast Furnace Slag as Coarse Aggregate in Concrete Pavements

DOT National Transportation Integrated Search

2012-03-01

This report presents available information regarding the use of air-cooled blast furnace slag (ACBFS) as coarse aggregate in concrete pavements. The report discusses ACBFS aggregate production and properties, and the properties of concrete produced w...

Labor relations and labor costs in the airline industry : contemporary issues

DOT National Transportation Integrated Search

1992-05-01

Labor-management relations in the airline industry evolved largely in the context of government regulation up to 1978, driven heavily by the implications of the Railway Labor Act. The Aieline Deregulation Act of 1978 brought in a new era in airline l...

Outcomes of Nulliparous Women with Spontaneous Labor Onset Admitted to Hospitals in Pre-active versus Active Labor

PubMed Central

NEAL, Jeremy L.; LAMP, Jane M.; BUCK, Jacalyn S.; LOWE, Nancy K.; GILLESPIE, Shannon L.; RYAN, Sharon L.

2014-01-01

Introduction The timing of when a woman is admitted to the hospital for labor care following spontaneous contraction onset may be among the most important decisions that labor attendants make as it can influence care patterns and birth outcomes. The aims of this study were to estimate the percentage of low-risk, nulliparous women at term who are admitted to labor units prior to active labor and to evaluate the effects of the timing of admission (i.e., pre-active versus active labor) on labor interventions and mode of birth. Methods Obstetrics data from low-risk, nulliparous women with spontaneous labor onset at term gestation (N = 216) were merged from two prospective studies conducted at three large, Midwestern hospitals. Baseline characteristics, labor interventions, and outcomes were compared between groups using Fisher’s exact and Mann-Whitney U tests, as appropriate. Likelihoods for oxytocin augmentation, amniotomy, and cesarean delivery were assessed by logistic regression. Results Of the sample of 216 low-risk nulliparous women, 114 (52.8%) were admitted in pre-active labor and 102 (47.2%) were admitted in active labor. Women admitted in pre-active labor were more likely to undergo oxytocin augmentation (84.2% and 45.1%, respectively; odds ratio (OR) 6.5, 95% confidence interval (CI) 3.43–12.27) but not amniotomy (55.3% and 61.8%, respectively; OR 0.8, 95% CI 0.44–1.32) when compared to women admitted in active labor. The likelihood of cesarean delivery was higher for women admitted before active labor onset (15.8% and 6.9%, respectively; OR 2.6, 95% CI 1.02–6.37). Discussion Many low-risk nulliparous women with regular, spontaneous uterine contractions are admitted to labor units before active labor onset, which increases their likelihood of receiving oxytocin and being delivered via cesarean section. An evidence-based, standardized approach for labor admission decision-making is recommended to decrease inadvertent admissions of women in pre

48 CFR 222.101 - Labor relations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Labor relations. 222.101... OF DEFENSE SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 222.101 Labor relations. ...

Reduction in soil aggregation in response to dust emission processes

NASA Astrophysics Data System (ADS)

Swet, Nitzan; Katra, Itzhak

2016-09-01

Dust emission by aeolian (wind) soil erosion depends on the topsoil properties of the source area, especially on the nature of the aggregates where most dust particles are held. Although the key role of soil aggregates in dust emission, the response of soil aggregation to aeolian processes and its implications for dust emission remain unknown. This study focuses on aggregate size distribution (ASD) analyses before and after in-situ aeolian experiments in semiarid loess soils that are associated with dust emission. Wind tunnel simulations show that particulate matter (PM) emission and saltation rates depend on the initial ASD and shear velocity. Under all initial ASD conditions, the content of saltator-sized aggregates (63-250 μm) increased by 10-34% due to erosion of macro-aggregates (> 500 μm), resulting in a higher size ratio (SR) between the saltators and macro-aggregates following the aeolian erosion. The results revealed that the saltator production increases significantly for soils that are subjected to short-term (anthropogenic) disturbance of the topsoil. The findings highlight a decrease in soil aggregation for all initial ASD's in response to aeolian erosion, and consequently its influence on the dust emission potential. Changes in ASD should be considered as a key parameter in dust emission models of complex surfaces.

Effect of protein-surfactant interactions on aggregation of β-lactoglobulin.

PubMed

Hansted, Jon G; Wejse, Peter L; Bertelsen, Hans; Otzen, Daniel E

2011-05-01

The milk protein β-lactoglobulin (βLG) dominates the properties of whey aggregates in food products. Here we use spectroscopic and calorimetric techniques to elucidate how anionic, cationic and non-ionic surfactants interact with bovine βLG and modulate its heat-induced aggregation. Alkyl trimethyl ammonium chlorides (xTAC) strongly promote aggregation, while sodium alkyl sulfates (SxS) and alkyl maltopyranosides (xM) reduce aggregation. Sodium dodecyl sulfate (SDS) binds to non-aggregated βLG in several steps, but reduction of aggregation was associated with the first binding step, which occurs far below the critical micelle concentration. In contrast, micellar concentrations of xMs are required to reduce aggregation. The ranking order for reduction of aggregation (normalized to their tendency to self-associate) was C10-C12>C8>C14 for SxS and C8>C10>C12>C14>C16 for xM. xTAC promote aggregation in the same ranking order as xM reduce it. We conclude that SxS reduce aggregation by stabilizing the protein's ligand-bound state (the melting temperature t(m) increases by up to 10°C) and altering its charge potential. xM monomers also stabilize the protein's ligand-bound state (increasing t(m) up to 6°C) but in the absence of charged head groups this is not sufficient by itself to prevent aggregation. Although micelles of both anionic and non-ionic surfactants destabilize βLG, they also solubilize unfolded protein monomers, leaving them unavailable for protein-protein association and thus inhibiting aggregation. Cationic surfactants promote aggregation by a combination of destabilization and charge neutralization. The food compatible surfactant sodium dodecanoate also inhibited aggregation well below the cmc, suggesting that surfactants may be a practical way to modulate whey protein properties. Copyright © 2011 Elsevier B.V. All rights reserved.

48 CFR 3022.101 - Labor relations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Labor relations. 3022.101... ACQUISITION REGULATION (HSAR) SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 3022.101 Labor relations. ...

Coal Combustion Wastes Reuse in Low Energy Artificial Aggregates Manufacturing.

PubMed

Ferone, Claudio; Colangelo, Francesco; Messina, Francesco; Iucolano, Fabio; Liguori, Barbara; Cioffi, Raffaele

2013-10-31

Sustainable building material design relies mostly on energy saving processes, decrease of raw materials consumption, and increase of waste and by-products recycling. Natural and lightweight artificial aggregates production implies relevant environmental impact. This paper addresses both the issues of residues recycling and energy optimization. Particularly, three coal combustion wastes (Weathered Fly Ash, WFA; Wastewater Treatment Sludge, WTS; Desulfurization Device Sludge, DDS) supplied by the Italian electric utility company (ENEL) have been employed in the manufacture of cold bonded artificial aggregates. Previously, the residues have been characterized in terms of chemical and mineralogical compositions, water content, particle size distribution, and heavy metal release behavior. These wastes have been used in the mix design of binding systems with the only addition of lime. Finally, the artificial aggregates have been submitted to physical, mechanical, and leaching testing, revealing that they are potentially suitable for many civil engineering applications.

Coal Combustion Wastes Reuse in Low Energy Artificial Aggregates Manufacturing

PubMed Central

Ferone, Claudio; Colangelo, Francesco; Messina, Francesco; Iucolano, Fabio; Liguori, Barbara; Cioffi, Raffaele

2013-01-01

Sustainable building material design relies mostly on energy saving processes, decrease of raw materials consumption, and increase of waste and by-products recycling. Natural and lightweight artificial aggregates production implies relevant environmental impact. This paper addresses both the issues of residues recycling and energy optimization. Particularly, three coal combustion wastes (Weathered Fly Ash, WFA; Wastewater Treatment Sludge, WTS; Desulfurization Device Sludge, DDS) supplied by the Italian electric utility company (ENEL) have been employed in the manufacture of cold bonded artificial aggregates. Previously, the residues have been characterized in terms of chemical and mineralogical compositions, water content, particle size distribution, and heavy metal release behavior. These wastes have been used in the mix design of binding systems with the only addition of lime. Finally, the artificial aggregates have been submitted to physical, mechanical, and leaching testing, revealing that they are potentially suitable for many civil engineering applications. PMID:28788372

Production of heterotrophic bacteria inhabiting macroscopic organic aggregates (marine snow) from surface waters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alldredge, A.L.; Cole, J.J.; Caron, D.A.

1986-01-01

Macroscopic detrital aggregates, known as marine snow, are a ubiquitous and abundant component of the marine pelagic zone. Descriptions of microbial communities occurring at densities 2-5 orders of magnitude higher on these particles than in the surrounding seawater have led to the suggestion that marine snow may be a site of intense heterotrophic activity. The authors tested this hypothesis using incorporation of (/sup 3/H)thymidine into macromolecules as a measure of bacterial growth occurring on marine snow from oceanic waters in the North Atlantic and from neritic waters off southern California. Abundances of marine snow ranged from 0.1 to 4.3 aggregatesmore » per liter. However, only 0.1-4% ration per cell on aggregates was generally equal to or lower than that of bacteria found free-living in the surrounding seawater, indicating that attached bacteria were not growing more rapidly than free-living bacteria. Bacteria inhabiting aggregates were up to 25 times larger than free-living forms.« less

[Risk factors for preterm labor].

PubMed

Rodrigues, T; Barros, H

1998-10-01

Most studies investigating preterm risk factors include medically induced preterm labor due to fetal or maternal complications and do not distinguish preterm labor from preterm premature rupture of membranes. Thus, the objective of this study was to determine the proportion of the three types of preterm birth and identify risk factors for spontaneous preterm labor in a sample of pregnant women who delivered at two level III units. From January to October 1996, we interviewed 385 women with live preterm newborns and, as controls, 357 mothers of term newborns. Preterm births were classified as preterm labor, preterm premature rupture of membranes and iathrogenic preterm. Independent associations between maternal sociodemographic, constitutional, nutritional and obstetric characteristics and preterm labor were identified using logistic regression analysis. In this sample of preterm births, 29% corresponded to preterm labor, 49% to preterm premature rupture of the membranes and 22% were iathrogenic preterm. The identified risk factors for preterm labor were multiple gestation, no paid work during pregnancy, less than six prenatal care visits, arm circumference less than 26 cm and previous preterm or low birth-weight. Gestational bleeding during the first or third trimester was significantly associated with preterm labor. As previously recognized, multiple gestation, prior preterm or low birthweight and gestational bleeding are established risk factors for preterm labor. However, prenatal care, maternal work and nutritional status have also been revealed as important issues in preterm risk, deserving special interest since they are susceptible to preventive intervention.

Oxytocin regimen for labor augmentation, labor progression, and perinatal outcomes.

PubMed

Zhang, Jun; Branch, D Ware; Ramirez, Mildred M; Laughon, S Katherine; Reddy, Uma; Hoffman, Mathew; Bailit, Jennifer; Kominiarek, Michelle; Chen, Zhen; Hibbard, Judith U

2011-08-01

To examine the effects and safety of high-dose (compared with low-dose) oxytocin regimen for labor augmentation on perinatal outcomes. Data from the Consortium on Safe Labor were used. A total of 15,054 women from six hospitals were eligible for the analysis. Women were grouped based on their oxytocin starting dose and incremental dosing of 1, 2, and 4 milliunits/min. Duration of labor and a number of maternal and neonatal outcomes were compared among these three groups stratified by parity. Multivariable logistic regression and generalized linear mixed model were used to adjust for potential confounders. Oxytocin regimen did not affect the rate of cesarean delivery or other perinatal outcomes. Compared with 1 milliunit/min, the regimens starting with 2 milliunits/min and 4 milliunits/min reduced the duration of first stage by 0.8 hours (95% confidence interval 0.5-1.1) and 1.3 hours (1.0-1.7), respectively, in nulliparous women. No effect was observed on the second stage of labor. Similar patterns were observed in multiparous women. High-dose regimen was associated with a reduced risk of meconium stain, chorioamnionitis, and newborn fever in multiparous women. High-dose oxytocin regimen (starting dose at 4 milliunits/min and increment of 4 millliunits/min) is associated with a shorter duration of first-stage of labor for all parities without increasing the cesarean delivery rate or adversely affecting perinatal outcomes. II.

Mothers' Perceptions of Labor Support.

PubMed

Nikula, Pirkko; Laukkala, Helena; Pölkki, Tarja

2015-01-01

The purpose of this study was to describe mothers' perceptions of labor support during childbirth. A cross-sectional, descriptive, correlational survey design was used. Data were collected using the Bryanton Adaptation of Nursing Support in Labor Questionnaire (BANSILQ) completed by new mothers (n = 260) in the postnatal ward in a Finnish university hospital. Nonparametric methods were used for data analysis. Mothers perceived emotional assistance to be most important. From the list of midwives' labor support behaviors provided in the survey, the following were considered most helpful: giving praise, treating on an individual basis, and answering questions truthfully and understandably. Emotional, tangible, and informational labor support enhanced the mothers' birth experiences. Labor support should be provided when caring for every mother during childbirth. An evidence-based model of labor support should be used for nursing and midwifery education and clinical practice.

Guidance to Achieve Accurate Aggregate Quantitation in Biopharmaceuticals by SV-AUC.

PubMed

Arthur, Kelly K; Kendrick, Brent S; Gabrielson, John P

2015-01-01

The levels and types of aggregates present in protein biopharmaceuticals must be assessed during all stages of product development, manufacturing, and storage of the finished product. Routine monitoring of aggregate levels in biopharmaceuticals is typically achieved by size exclusion chromatography (SEC) due to its high precision, speed, robustness, and simplicity to operate. However, SEC is error prone and requires careful method development to ensure accuracy of reported aggregate levels. Sedimentation velocity analytical ultracentrifugation (SV-AUC) is an orthogonal technique that can be used to measure protein aggregation without many of the potential inaccuracies of SEC. In this chapter, we discuss applications of SV-AUC during biopharmaceutical development and how characteristics of the technique make it better suited for some applications than others. We then discuss the elements of a comprehensive analytical control strategy for SV-AUC. Successful implementation of these analytical control elements ensures that SV-AUC provides continued value over the long time frames necessary to bring biopharmaceuticals to market. © 2015 Elsevier Inc. All rights reserved.

Activated stress response pathways within multicellular aggregates utilize an autocrine component.

PubMed

Jack, Graham D; Cabrera, M Carla; Manning, Michael L; Slaughter, Stephen M; Potts, Malcolm; Helm, Richard F

2007-04-01

Multicellular aggregates (spheroids) of primary human foreskin fibroblasts (HFF-2) and a glioblastoma cell line (T98G) entered and exited from long term (2 weeks) metabolic arrest utilizing an autocrine response. Cytokine production (specifically IFN-gamma) activated a Gadd45alpha/p38 pathway that led to increased AP-1 (c-jun and ATF3) transcription factor levels, augmenting cytokine production in an autocrine fashion. Whereas HFF-2 aggregates were capable of surviving long term arrest and recovery during NF-kappaB inhibition independent of JNK activation, T98G aggregates were not. Such endogenous processes are not easily observed with adherent monolayer cell culturing systems, strongly suggesting that more emphasis needs to be placed on determining the operational signal transduction cascades within multicellular aggregates. Extracellular inputs such as spheroid formation, arrest, and regrowth as monolayers invoke intracellular signaling responses converging at the AP-1 transcription factor level. Variations in responses are both cell type and transformation state dependent and require an autocrine cytokine component. The data are discussed in relation to the wounding response and avascular tumor growth mechanisms.

Feeding on dispersed vs. aggregated particles: The effect of zooplankton feeding behavior on vertical flux.

PubMed

Koski, Marja; Boutorh, Julia; de la Rocha, Christina

2017-01-01

Zooplankton feeding activity is hypothesized to attenuate the downward flux of elements in the ocean. We investigated whether the zooplankton community composition could influence the flux attenuation, due to the differences of feeding modes (feeding on dispersed vs. aggregated particles) and of metabolic rates. We fed 5 copepod species-three calanoid, one harpacticoid and one poecilamastoid-microplankton food, in either dispersed or aggregated form and measured rates of respiration, fecal pellet production and egg production. Calanoid copepods were able to feed only on dispersed food; when their food was introduced as aggregates, their pellet production and respiration rates decreased to rates observed for starved individuals. In contrast, harpacticoids and the poecilamastoid copepod Oncaea spp. were able to feed only when the food was in the form of aggregates. The sum of copepod respiration, pellet production and egg production rates was equivalent to a daily minimum carbon demand of ca. 10% body weight-1 for all non-feeding copepods; the carbon demand of calanoids feeding on dispersed food was 2-3 times greater, and the carbon demand of harpacticoids and Oncaea spp. feeding on aggregates was >7 times greater, than the resting rates. The zooplankton species composition combined with the type of available food strongly influences the calculated carbon demand of a copepod community, and thus also the attenuation of vertical carbon flux.

Feeding on dispersed vs. aggregated particles: The effect of zooplankton feeding behavior on vertical flux

PubMed Central

Boutorh, Julia; de la Rocha, Christina

2017-01-01

Zooplankton feeding activity is hypothesized to attenuate the downward flux of elements in the ocean. We investigated whether the zooplankton community composition could influence the flux attenuation, due to the differences of feeding modes (feeding on dispersed vs. aggregated particles) and of metabolic rates. We fed 5 copepod species—three calanoid, one harpacticoid and one poecilamastoid–microplankton food, in either dispersed or aggregated form and measured rates of respiration, fecal pellet production and egg production. Calanoid copepods were able to feed only on dispersed food; when their food was introduced as aggregates, their pellet production and respiration rates decreased to rates observed for starved individuals. In contrast, harpacticoids and the poecilamastoid copepod Oncaea spp. were able to feed only when the food was in the form of aggregates. The sum of copepod respiration, pellet production and egg production rates was equivalent to a daily minimum carbon demand of ca. 10% body weight-1 for all non-feeding copepods; the carbon demand of calanoids feeding on dispersed food was 2–3 times greater, and the carbon demand of harpacticoids and Oncaea spp. feeding on aggregates was >7 times greater, than the resting rates. The zooplankton species composition combined with the type of available food strongly influences the calculated carbon demand of a copepod community, and thus also the attenuation of vertical carbon flux. PMID:28545095

Not by Labor Alone: Considerations for Value Influence Use of the Labor Rule in Ownership Transfers

ERIC Educational Resources Information Center

Kanngiesser, Patricia; Hood, Bruce

2014-01-01

People often assign ownership to the person who has invested labor into making an object (labor rule). However, labor usually improves objects and increases their value, and it has not been investigated whether these considerations underlie people's use of the labor rule. We presented participants with third-party ownership conflicts between…

48 CFR 1222.101 - Labor relations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Labor relations. 1222.101 Section 1222.101 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 1222.101 Labor relations. ...

48 CFR 1322.101 - Labor relations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Labor relations. 1322.101 Section 1322.101 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 1322.101 Labor relations. ...

48 CFR 2822.101 - Labor relations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Labor relations. 2822.101 Section 2822.101 Federal Acquisition Regulations System DEPARTMENT OF JUSTICE Socioeconomic Programs APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 2822.101 Labor relations. ...

48 CFR 22.101 - Labor relations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Labor relations. 22.101 Section 22.101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 22.101 Labor relations. ...

48 CFR 522.101 - Labor relations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Labor relations. 522.101 Section 522.101 Federal Acquisition Regulations System GENERAL SERVICES ADMINISTRATION SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 522.101 Labor relations. ...

Protein aggregates as depots for the release of biologically active compounds.

PubMed

Artemova, Natalya V; Kasakov, Alexei S; Bumagina, Zoya M; Lyutova, Elena M; Gurvits, Bella Ya

2008-12-12

Protein misfolding and aggregation is one of the most serious problems in cell biology, molecular medicine, and biotechnology. Misfolded proteins interact with each other or with other proteins in non-productive or damaging ways. However, a new paradigm arises that protein aggregation may be exploited by nature to perform specific functions in different biological contexts. From this consideration, acceleration of stress-induced protein aggregation triggered by any factor resulting in the formation of soluble aggregates may have paradoxical positive consequences. Here, we suggest that amorphous aggregates can act as a source for the release of biologically active proteins after removal of stress conditions. To address this concept, we investigated the kinetics of thermal aggregation in vitro of yeast alcohol dehydrogenase (ADH) as a model substrate in the presence of two amphiphilic peptides: Arg-Phe or Ala-Phe-Lys. Using dynamic light scattering (DLS) and turbidimetry, we have demonstrated that under mild stress conditions the concentration-dependent acceleration of ADH aggregation by these peptides results in formation of large but soluble complexes of proteins prone to refolding.

29 CFR 552.108 - Child labor provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Child labor provisions. 552.108 Section 552.108 Labor... OF THE FAIR LABOR STANDARDS ACT TO DOMESTIC SERVICE Interpretations § 552.108 Child labor provisions. Congress made no change in section 12 as regards domestic service employees. Accordingly, the child labor...

29 CFR 552.108 - Child labor provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Child labor provisions. 552.108 Section 552.108 Labor... OF THE FAIR LABOR STANDARDS ACT TO DOMESTIC SERVICE Interpretations § 552.108 Child labor provisions. Congress made no change in section 12 as regards domestic service employees. Accordingly, the child labor...

29 CFR 552.108 - Child labor provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Child labor provisions. 552.108 Section 552.108 Labor... OF THE FAIR LABOR STANDARDS ACT TO DOMESTIC SERVICE Interpretations § 552.108 Child labor provisions. Congress made no change in section 12 as regards domestic service employees. Accordingly, the child labor...

29 CFR 552.108 - Child labor provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Child labor provisions. 552.108 Section 552.108 Labor... OF THE FAIR LABOR STANDARDS ACT TO DOMESTIC SERVICE Interpretations § 552.108 Child labor provisions. Congress made no change in section 12 as regards domestic service employees. Accordingly, the child labor...

29 CFR 552.108 - Child labor provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Child labor provisions. 552.108 Section 552.108 Labor... OF THE FAIR LABOR STANDARDS ACT TO DOMESTIC SERVICE Interpretations § 552.108 Child labor provisions. Congress made no change in section 12 as regards domestic service employees. Accordingly, the child labor...

GEOMETRIC CROSS SECTIONS OF DUST AGGREGATES AND A COMPRESSION MODEL FOR AGGREGATE COLLISIONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suyama, Toru; Wada, Koji; Tanaka, Hidekazu

2012-07-10

Geometric cross sections of dust aggregates determine their coupling with disk gas, which governs their motions in protoplanetary disks. Collisional outcomes also depend on geometric cross sections of initial aggregates. In a previous paper, we performed three-dimensional N-body simulations of sequential collisions of aggregates composed of a number of sub-micron-sized icy particles and examined radii of gyration (and bulk densities) of the obtained aggregates. We showed that collisional compression of aggregates is not efficient and that aggregates remain fluffy. In the present study, we examine geometric cross sections of the aggregates. Their cross sections decrease due to compression as wellmore » as to their gyration radii. It is found that a relation between the cross section and the gyration radius proposed by Okuzumi et al. is valid for the compressed aggregates. We also refine the compression model proposed in our previous paper. The refined model enables us to calculate the evolution of both gyration radii and cross sections of growing aggregates and reproduces well our numerical results of sequential aggregate collisions. The refined model can describe non-equal-mass collisions as well as equal-mass cases. Although we do not take into account oblique collisions in the present study, oblique collisions would further hinder compression of aggregates.« less

Defining and systematic analyses of aggregation indices to evaluate degree of calcium oxalate crystal aggregation

NASA Astrophysics Data System (ADS)

Chaiyarit, Sakdithep; Thongboonkerd, Visith

2017-12-01

Crystal aggregation is one of the most crucial steps in kidney stone pathogenesis. However, previous studies of crystal aggregation were rarely done and quantitative analysis of aggregation degree was handicapped by a lack of the standard measurement. We thus performed an in vitro assay to generate aggregation of calcium oxalate monohydrate (COM) crystals with various concentrations (25-800 µg/ml) in saturated aggregation buffer. The crystal aggregates were analyzed by microscopic examination, UV-visible spectrophotometry, and GraphPad Prism6 software to define a total of 12 aggregation indices (including number of aggregates, aggregated mass index, optical density, aggregation coefficient, span, number of aggregates at plateau time-point, aggregated area index, aggregated diameter index, aggregated symmetry index, time constant, half-life, and rate constant). The data showed linear correlation between crystal concentration and almost all of these indices, except only for rate constant. Among these, number of aggregates provided the greatest regression coefficient (r=0.997; p<0.001), whereas the equally second rank included aggregated mass index and optical density (r=0.993; p<0.001 and r=‑0.993; p<0.001, respectively) and the equally forth were aggregation coefficient and span (r=0.991; p<0.001 for both). These five indices are thus recommended as the most appropriate indices for quantitative analysis of COM crystal aggregation in vitro.

48 CFR 1422.101 - Labor relations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Labor relations. 1422.101 Section 1422.101 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 1422.101 Labor relations. ...

[Changes in labor market participation of older employees in Germany: the perspective of labor market research].

PubMed

Brussig, M

2009-08-01

For many years, Germany has been regarded in international comparisons as an example of a generous early retirement culture, resulting in a low labor market participation of older employees. Recently, however, employment rates of older employees have increased remarkably. Reasons are the demographic structure of older persons in Germany, a long-term trend of increasing female labor market participation, and reforms in labor-market policies and pension policies during the last 10 years. Despite an increasing labor market participation of older employees, traditional labor market risks for older persons partly remained, but some new risks evolved as well. Therefore, social differentiation among older employees increased.Although detailed macro descriptions exist, the causes of labor market developments cannot be fully understood with cross-sectional data alone. An important stimulus is to be expected from individual longitudinal data which reflect employment histories and labor market transitions such as employment exit and retirement.

Cellulose Aggregation under Hydrothermal Pretreatment Conditions.

PubMed

Silveira, Rodrigo L; Stoyanov, Stanislav R; Kovalenko, Andriy; Skaf, Munir S

2016-08-08

Cellulose, the most abundant biopolymer on Earth, represents a resource for sustainable production of biofuels. Thermochemical treatments make lignocellulosic biomaterials more amenable to depolymerization by exposing cellulose microfibrils to enzymatic or chemical attacks. In such treatments, the solvent plays fundamental roles in biomass modification, but the molecular events underlying these changes are still poorly understood. Here, the 3D-RISM-KH molecular theory of solvation has been employed to analyze the role of water in cellulose aggregation under different thermodynamic conditions. The results show that, under ambient conditions, highly structured hydration shells around cellulose create repulsive forces that protect cellulose microfibrils from aggregating. Under hydrothermal pretreatment conditions, however, the hydration shells lose structure, and cellulose aggregation is favored. These effects are largely due to a decrease in cellulose-water interactions relative to those at ambient conditions, so that cellulose-cellulose attractive interactions become prevalent. Our results provide an explanation to the observed increase in the lateral size of cellulose crystallites when biomass is subject to pretreatments and deepen the current understanding of the mechanisms of biomass modification.

Labor Dystocia: A Common Approach to Diagnosis.

PubMed

Neal, Jeremy L; Lowe, Nancy K; Schorn, Mavis N; Holley, Sharon L; Ryan, Sharon L; Buxton, Margaret; Wilson-Liverman, Angela M

2015-01-01

Contemporary labor and birth population norms should be the basis for evaluating labor progression and determining slow progress that may benefit from intervention. The aim of this article is to present guidelines for a common, evidence-based approach for determination of active labor onset and diagnosis of labor dystocia based on a synthesis of existing professional guidelines and relevant contemporary publications. A 3-point approach for diagnosing active labor onset and classifying labor dystocia-related labor aberrations into well-defined, mutually exclusive categories that can be used clinically and validated by researchers is proposed. The approach comprises identification of 1) an objective point that strictly defines active labor onset (point of active labor determination); 2) an objective point that identifies when labor progress becomes atypical, beyond which interventions aimed at correcting labor dystocia may be justified (point of protraction diagnosis); and 3) an objective point that identifies when interventions aimed at correcting labor dystocia, if used, can first be determined to be unsuccessful, beyond which assisted vaginal or cesarean birth may be justified (earliest point of arrest diagnosis). Widespread adoption of a common approach for diagnosing labor dystocia will facilitate consistent evaluation of labor progress, improve communications between clinicians and laboring women, indicate when intervention aimed at speeding labor progress or facilitating birth may be appropriate, and allow for more efficient translation of safe and effective management strategies into clinical practice. Correct application of the diagnosis of labor dystocia may lead to a decrease in the rate of cesarean birth, decreased health care costs, and improved health of childbearing women and neonates. © 2015 by the American College of Nurse-Midwives.

The Flexible University: Higher Education and the Global Production of Migrant Labor

ERIC Educational Resources Information Center

Ortiga, Yasmin Y.

2017-01-01

This article demonstrates how neoliberal higher education has come to play a distinct role in the global market for migrant labor, where a growing number of developing nations educate its citizens for overseas work in order to maximize future monetary remittances. Located in the Philippines, this study shows how local colleges and universities…

Industrial labor relations manual

NASA Technical Reports Server (NTRS)

1992-01-01

The NASA Industrial Labor Relations Manual provides internal guidelines and procedures to assist NASA Field Installations in dealing with contractor labor management disputes, Service Contract Act variance hearings, and to provide access of Labor Union Representatives to NASA for the purpose of maintaining schedules and goals in connection with vital NASA programs. This manual will be revised by page changes as revisions become necessary. Initial distribution of this manual has been made to NASA Headquarters and Field Installations.

24 CFR 585.313 - Labor standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) Laborers and mechanics other than Youthbuild Trainees. (1) All laborers and mechanics (other than... such laborers and mechanics on assisted housing shall be subject to the provisions of the Contract Work... standards apply to laborers and mechanics other than Youthbuild trainees to the extent required by the other...

24 CFR 585.313 - Labor standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Laborers and mechanics other than Youthbuild Trainees. (1) All laborers and mechanics (other than... such laborers and mechanics on assisted housing shall be subject to the provisions of the Contract Work... standards apply to laborers and mechanics other than Youthbuild trainees to the extent required by the other...

24 CFR 585.313 - Labor standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Laborers and mechanics other than Youthbuild Trainees. (1) All laborers and mechanics (other than... such laborers and mechanics on assisted housing shall be subject to the provisions of the Contract Work... standards apply to laborers and mechanics other than Youthbuild trainees to the extent required by the other...

24 CFR 585.313 - Labor standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Laborers and mechanics other than Youthbuild Trainees. (1) All laborers and mechanics (other than... such laborers and mechanics on assisted housing shall be subject to the provisions of the Contract Work... standards apply to laborers and mechanics other than Youthbuild trainees to the extent required by the other...

24 CFR 570.603 - Labor standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Labor standards. 570.603 Section... DEVELOPMENT COMMUNITY FACILITIES COMMUNITY DEVELOPMENT BLOCK GRANTS Other Program Requirements § 570.603 Labor standards. (a) Section 110(a) of the Act contains labor standards that apply to nonvolunteer labor financed...

Utilizing dynamic light scattering as a process analytical technology for protein folding and aggregation monitoring in vaccine manufacturing.

PubMed

Yu, Zhou; Reid, Jennifer C; Yang, Yan-Ping

2013-12-01

Protein aggregation is a common challenge in the manufacturing of biological products. It is possible to minimize the extent of aggregation through timely measurement and in-depth characterization of aggregation. In this study, we demonstrated the use of dynamic light scattering (DLS) to monitor inclusion body (IB) solubilization, protein refolding, and aggregation near the production line of a recombinant protein-based vaccine candidate. Our results were in good agreement with those measured by size-exclusion chromatography. DLS was also used to characterize the mechanism of aggregation. As DLS is a quick, nonperturbing technology, it can potentially be used as an at-line process analytical technology to ensure complete IB solubilization and aggregate-free refolding. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Integrating habits and practices data for soaps, cosmetics and air care products into an existing aggregate exposure model.

PubMed

Comiskey, D; Api, A M; Barrett, C; Ellis, G; McNamara, C; O'Mahony, C; Robison, S H; Rose, J; Safford, B; Smith, B; Tozer, S

2017-08-01

In order to accurately assess aggregate exposure to a fragrance material in consumers, data are needed on consumer habits and practices, as well as the concentration of the fragrance material in those products. The present study describes the development of Phase 2 Creme RIFM model by expanding the previously developed Phase 1 model to include an additional six product types. Using subject-matching algorithms, the subjects in the Phase 1 Creme RIFM database were paired with subjects in the SUPERB and BodyCare surveys based on age and gender. Consumption of the additional products was simulated to create a seven day diary allowing full data integration in a consistent format. The inhalation route was also included for air care and other products where a fraction of product used is inhaled, derived from the RIFM 2-box model. The expansion of the Phase 1 Creme RIFM model has resulted in a more extensive and refined model, which covers a broader range of product categories and now, includes all relevant routes of exposure. An evaluation of the performance of the model has been carried out in an accompanying publication to this one. Copyright © 2017 Elsevier Inc. All rights reserved.

The Volatile Teenage Labor Market: Labor Force Entry, Exit, and Unemployment Flows.

ERIC Educational Resources Information Center

Smith, Ralph E.; Vanski, Jean E.

1979-01-01

Alerts researchers to the potential value and limitations of the gross flow data published in the Department of Labor's Current Population Survey (CPS). Reports on research which used CPS data to analyze patterns of teenage unemployment and labor force participation. (PR)

Labor Education in America

ERIC Educational Resources Information Center

Carlson, Kenneth D.

1971-01-01

Labor education reflects the pragmaticism of American culture and supports the system. It emphasizes leadership training, loyalty building, and political education. The control of labor education is centralized in union headquarters. (VW)

Thermodynamics of Protein Aggregation

NASA Astrophysics Data System (ADS)

Osborne, Kenneth L.; Barz, Bogdan; Bachmann, Michael; Strodel, Birgit

Amyloid protein aggregation characterizes many neurodegenerative disorders, including Alzheimer's, Parkinson's, and Creutz- feldt-Jakob disease. Evidence suggests that amyloid aggregates may share similar aggregation pathways, implying simulation of full-length amyloid proteins is not necessary for understanding amyloid formation. In this study we simulate GNNQQNY, the N-terminal prion-determining domain of the yeast protein Sup35 to investigate the thermodynamics of structural transitions during aggregation. We use a coarse-grained model with replica-exchange molecular dynamics to investigate the association of 3-, 6-, and 12-chain GNNQQNY systems and we determine the aggregation pathway by studying aggregation states of GN- NQQNY. We find that the aggregation of the hydrophilic GNNQQNY sequence is mainly driven by H-bond formation, leading to the formation of /3-sheets from the very beginning of the assembly process. Condensation (aggregation) and ordering take place simultaneously, which is underpinned by the occurrence of a single heat capacity peak only.

Dual-force aggregation of magnetic particles enhances label-free quantification of DNA at the sub-single cell level.

PubMed

Nelson, Daniel A; Strachan, Briony C; Sloane, Hillary S; Li, Jingyi; Landers, James P

2014-03-28

We recently reported the 'pinwheel effect' as the foundation for a DNA assay based on a DNA concentration-dependent aggregation of silica-coated magnetic beads in a rotating magnetic field (RMF). Using a rotating magnet that generated a 5 cm magnetic field that impinged on a circular array of 5mm microwells, aggregation was found to only be effective in a single well at the center of the field. As a result, when multiple samples needed to be analyzed, the single-plex (single well) analysis was tedious, time-consuming and labor-intensive, as each well needed to be exposed to the center of the RMF in a serial manner for consistent well-to-well aggregation. For more effective multiplexing (simultaneous aggregation in 12 wells), we used a circular array of microwells and incorporated 'agitation' as a second force that worked in concert with the RMF to provide effective multiplexed aggregation-based DNA quantitation. The dual-force aggregation (DFA) approach allows for effective simultaneous aggregation in multiple wells (12 demonstrated) of the multi-well microdevice, allowing for 12 samples to be interrogated for DNA content in 140 s, providing a ∼35-fold improvement in time compared to single-plex approach (80 min) and ∼4-fold improvement over conventional fluorospectrometric methods. Furthermore, the increased interaction between DNA and beads provided by DFA improved the limit of detection to 250 fg μL(-1). The correlation between the DFA results and those from a fluorospectrometer, demonstrate DFA as an inexpensive and rapid alternative to more conventional methods (fluorescent and spectrophotometric). Copyright © 2014 Elsevier B.V. All rights reserved.

3 CFR 13522 - Executive Order 13522 of December 9, 2009. Creating Labor-Management Forums To Improve Delivery...

Code of Federal Regulations, 2010 CFR

2010-01-01

..., nonprofit organizations, State and local governments, Federal employees, and customers of Federal services... satisfaction, manager satisfaction, and organizational performance resulting from the labor-management forums... labor-management satisfaction, productivity gains, cost savings, and other areas as identified by the...

A study on the performance of concrete containing recycled aggregates and ceramic as materials replacement

NASA Astrophysics Data System (ADS)

Azmi, N. B.; Khalid, F. S.; Irwan, J. M.; Anting, N.; Mazenan, P. N.

2017-11-01

Natural fine aggregate materials are commonly used in development and commercial construction in Malaysia. In fact, concrete production was increased as linear with the growing Malaysia economy. However, an issue was production of concrete was to locate adequate sources of natural fine aggregates. There lot of studies have been conducted in order to replace the fine aggregate in which natural fine aggregate replace with the waste material in concrete preparation. Therefore, this study aims to utilize the Recycled Concrete Aggregate (RCA) and ceramic waste which has great potential to replace the natural aggregate in concrete mix with different type of method, admixture, and parameters. This research were focused on compressive strength and water absorption test to determine the optimum mix ratio of concrete mix. The concrete aggregate was chosen due to improvement capillary bonding mechanisms and ceramic presented similar strength compared to the conventional concrete using natural aggregate. Percent of replacement have been used in this study was at 25%, 35% and 45% of the RCA and 5%, 10% and 15% for ceramic, respectively. Furthermore, this research was conduct to find the optimum percentage of aggregate replacement, using water-cement ratio of 0.55 with concrete grade 25/30. The best percentage of replacement was the RCA35% C15% with the compressive strength of 34.72 MPa and the water absorption was satisfied.

10 CFR 440.19 - Labor.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Labor. 440.19 Section 440.19 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.19 Labor. Payments for labor... supplement wages paid to training participants, public service employment workers, or other Federal or State...

Alternative demographic futures and the composition of the demand for labor, by industry and by occupation.

PubMed

Serow, W J

1981-01-01

An effort is made in this discussion to demonstrate the effects of varying rates of population growth upon the industrial and occupational compositions of demand for labor. The discussion extends previous research activity that has demonstrated that changes in the composition of consumer demand are insensitive to alternative rates of population growth. The discussion begins with a replication of projections of consumer demand patterns under 3 alternative population projections and then transforms these results into projections of final demand by industrial sector, demand for labor by industrial sector, and demand for labor by occupational group. Projections of US household composition patterns are made for the 1980-2020 period. The size and composition of the population and households are derived from US Bureau of the Census Series 1, 2, and 3 projections. From these, projections of size and composition of the labor force are derived utilizing Bureau of Labor Statistics' to 1990. Projections of average earnings per worker, in the aggregate, are taken from Bureau of Economic Analysis projections. The results show that both labor force compositions are relatively insensitive to varying demographic patterns. The industrial composition reflects a continuation of already existing trends, but the occupational composition shows some tendency to move away from professional and highly skilled blue collar occupations and towards service and clerical occupations. The results contain a variety of implications for policy considerations concerning higher education and the proper functioning of the labor market. The relative decline in the number of professional and managerial workers, the groups who are most likely to possess a university degree, suggests that the prospects for conventional higher education might be even less bright than would be suggested by an inspection of trends in the size of the 18-24 year old population. Some mitigation of this possibly adverse trend is

Tips for labor coaches

MedlinePlus

... some tips for getting prepared. Before the big day Arrives Labor coaches should go to childbirth classes ... get through her labor and delivery. When the day Arrives You might be at the hospital for ...

Neuroforecasting Aggregate Choice

PubMed Central

Knutson, Brian; Genevsky, Alexander

2018-01-01

Advances in brain-imaging design and analysis have allowed investigators to use neural activity to predict individual choice, while emerging Internet markets have opened up new opportunities for forecasting aggregate choice. Here, we review emerging research that bridges these levels of analysis by attempting to use group neural activity to forecast aggregate choice. A survey of initial findings suggests that components of group neural activity might forecast aggregate choice, in some cases even beyond traditional behavioral measures. In addition to demonstrating the plausibility of neuroforecasting, these findings raise the possibility that not all neural processes that predict individual choice forecast aggregate choice to the same degree. We propose that although integrative choice components may confer more consistency within individuals, affective choice components may generalize more broadly across individuals to forecast aggregate choice. PMID:29706726

Effects of SP6 Acupuncture Point Stimulation on Labor Pain and Duration of Labor

PubMed Central

Yesilcicek Calik, Kiymet; Komurcu, Nuran

2014-01-01

Background: Acupressure has been used frequently to improve labor, manage labor pain, and shorten delivery time. However, there has been little research-based evidence to support the positive effects of acupressure in the obstetric area and obstetric nursing. Objectives: The aim of this study was to evaluate the effects of SP6 acupressure on labor pain and delivery time in primigravida women in labor. Patients and Methods: The study was conducted at the Trabzon Maternity Hospital in Turkey. Its design was a randomized controlled clinical trial study using a single-blinded method. One hundred (100) primigravida women in labor were randomly assigned to either the SP6 acupressure (n = 50) or control group (n = 50). Acupressure was practiced 35 times in total on the SP6 point of both legs in the SP6 acupressure group; 15 times (during contraction) when cervical dilation was 2-3 cm, 10 times when cervical dilation was 5-6 cm and 10 times at 9-10 cm dilation, while the women in the control group received standard care. Labor pain was measured five times using a structured questionnaire of a subjective labor pain scale (visual analogue scale-VAS) when dilation was 2-3 cm (VAS 2), 5-6 cm (VAS 3) and 8-9 cm (VAS 4) before and after acupressure was applied to the SP6 point (VAS 1), and finally at the early postpartum period (VAS 5). The duration of labor in both groups was measured with a partograph and the length of delivery time was calculated in two stages: from 3 cm cervical dilation to full cervical dilation, and from full cervical dilation to delivery. Results: There were significant differences between the groups in subjective labor pain scores (except VAS 4) (P < 0.001). The duration of the Phase one (3 cm dilatation to full dilatation) and Phase two (full dilatation to birth) in the acupressure group was shorter than the control group (Phase one, 225 min and 320 min, respectively; Phase two, 15 min and 20 min, respectively; both P < 0.001). Conclusions: It was

Employment relations and global health: a typological study of world labor markets.

PubMed

Chung, Haejoo; Muntaner, Carles; Benach, Joan

2010-01-01

In this study, the authors investigate the global labor market and employment relations, which are central building blocks of the welfare state; the aim is to propose a global typology of labor markets to explain global inequalities in population health. Countries are categorized into core (21), semi-peripheral (42), and peripheral (71) countries, based on gross national product per capita (Atlas method). Labor market-related variables and factors are then used to generate clusters of countries with principal components and cluster analysis methods. The authors then examine the relationship between the resulting clusters and health outcomes. The clusters of countries are largely geographically defined, each cluster with similar historical background and developmental strategy. However, there are interesting exceptions, which warrant further elaboration. The relationship between health outcomes and clusters largely follows the authors' expectations (except for communicable diseases): more egalitarian labor institutions have better health outcomes. The world system, then, can be divided according to different types of labor markets that are predictive of population health outcomes at each level of economic development. As is the case for health and social policies, variability in labor market characteristics is likely to reflect, in part, the relative strength of a country's political actors.

Aggregates from natural and recycled sources; economic assessments for construction applications; a materials flow study

USGS Publications Warehouse

Wilburn, David R.; Goonan, Thomas G.

1998-01-01

Increased amounts of recycled materials are being used to supplement natural aggregates (derived from crushed stone, sand and gravel) in road construction. An understanding of the economics and factors affecting the level of aggregates recycling is useful in estimating the potential for recycling and in assessing the total supply picture of aggregates. This investigation includes a descriptive analysis of the supply sources, technology, costs, incentives, deterrents, and market relationships associated with the production of aggregates.

Do wages matter?: a backward bend in the 2004 California RN labor supply.

PubMed

Tellez, Michelle; Spetz, Joanne; Seago, Jean Ann; Harrington, Charlene M; Kitchener, Martin

2009-08-01

Using data from the 2004 California Board of Registered Nursing Survey, a two-stage least-square equation was estimated to examine the effect of wages on hours worked by female registered nurses. Wages were found to have a nonlinear effect on hours worked, with a backward bending supply curve. Wages had a positive effect on the average hours worked per week up to $24.99 per hour and a negative effect between $30.00 and $100.00 per hour when compared with the wage category of $25.00 to $29.99. Results suggest that wages are important to secure the labor supply but do not increase aggregate supply beyond a wage threshold.

The Supply and Demand for College Educated Labor.

ERIC Educational Resources Information Center

Nollen, Stanley D.

In this study a model for the supply of college educated labor is developed from human capital theory. A demand model is added, derived from neoclassical production function theory. Empirical estimates are made for white males and white females, using cross-sectional data on states of the U.S., 1960-70. In human capital theory, education is an…

Auto-aggregation properties of a novel aerobic denitrifier Enterobacter sp. strain FL.

PubMed

Wang, Xia; An, Qiang; Zhao, Bin; Guo, Jin Song; Huang, Yuan Sheng; Tian, Meng

2018-02-01

Enterobacter sp. strain FL was newly isolated from activated sludge and exhibited significant capability of auto-aggregation as well as aerobic denitrification. The removal efficiencies of NO 3 - -N, total nitrogen (TN), and TOC by strain FL in batch culture reached 94.6, 63.9, and 72.5% in 24 h, respectively. The production of N 2 O and N 2 in the presence of oxygen demonstrated the occurrence of aerobic denitrification. The auto-aggregation index of strain FL reached 54.3%, suggesting a high tendency that the cells would agglomerate into aggregates. The production of extracellular polymeric substances (EPSs), which were mainly composed of proteins followed by polysaccharides, was considered to be related to the cell aggregation according to Fourier transform infrared (FT-IR) and confocal laser scanning microscopy (CLSM). The proteins in EPS were evenly and tightly combined to cells and altered the protein secondary structures of cell surface from random coils to β-sheets and three-turn helices. The alteration of protein secondary structures of cell surface caused by the proteins in EPS might play a dominant role in the auto-aggregation of strain FL. To further assess the feasibility of strain FL for synthetic wastewater treatment, a sequencing batch reactor (SBR), solely inoculated with strain FL, was conducted. During the 16 running cycles, the removal efficiency of NO 3 - -N was 90.2-99.7% and the auto-aggregation index was stabilized at 35.0-41.5%. The EPS promoted the biomass of strain FL to aggregate in the SBR.

Recovery of MSWI and soil washing residues as concrete aggregates.

PubMed

Sorlini, Sabrina; Abbà, Alessandro; Collivignarelli, Carlo

2011-02-01

The aim of the present work was to study if municipal solid waste incinerator (MSWI) residues and aggregates derived from contaminated soil washing could be used as alternative aggregates for concrete production. Initially, chemical, physical and geometric characteristics (according to UNI EN 12620) of municipal solid waste incineration bottom ashes and some contaminated soils were evaluated; moreover, the pollutants release was evaluated by means of leaching tests. The results showed that the reuse of pre-treated MSWI bottom ash and washed soil is possible, either from technical or environmental point of view, while it is not possible for the raw wastes. Then, the natural aggregate was partially and totally replaced with these recycled aggregates for the production of concrete mixtures that were characterized by conventional mechanical and leaching tests. Good results were obtained using the same dosage of a high resistance cement (42.5R calcareous Portland cement instead of 32.5R); the concrete mixture containing 400 kg/m(3) of washed bottom ash and high resistance cement was classified as structural concrete (C25/30 class). Regarding the pollutants leaching, all concrete mixtures respected the limit values according to the Italian regulation. Copyright © 2010 Elsevier Ltd. All rights reserved.

76 FR 48901 - Office of Trade and Labor Affairs; National Advisory Committee for Labor Provisions of U.S. Free...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

...Pursuant to the Federal Advisory Committee Act (FACA), as amended, 5. U.S.C. App. 2, the Office of Trade and Labor Affairs (OTLA) gives notice of a meeting of the National Advisory Committee for Labor Provisions of U.S. Free Trade Agreements (``Committee'' or ``NAC''), which was established by the Secretary of Labor. The purpose of the meeting is to provide advice to the Secretary of Labor through the Bureau of International Labor Affairs (ILAB) concerning the implementation of the North American Agreement on Labor Cooperation (NAALC)--the labor side accord to the North American Free Trade Agreement (NAFTA)--and the labor provisions of free trade agreements.

Potential source for crushed granite aggregate in Heard County, Georgia

USGS Publications Warehouse

Atkins, R.L.; Higgins, Michael W.; Dickerson, Robert P.

1981-01-01

The production of crushed stone suitable for highway and general construction is a major industry in Georgia. The state ranks eighth in the nation in overall crushed stone production, and first in crushed granite production. Crushed stone production in Georgia in 1979 was 40,902,000 short tons worth $154,021,000 (D.H. White, Jr., US Bureau of Mines, personal commun., Aug. 1980). More than 3,000 people were employed by the crushed stone industry in Georgia during that year.Presently, the only active quarry in Heard County is located in an amphibolite. Amphibolite is not a conventional aggregate. It has a high specific gravity, a tendency to make elongate fragments, and varies considerably in abrasion tests.Because the nearest approved aggregate quarry is more than 25 miles from Franklin, the county seat, the purpose of this brief report is to describe a body of granite gneiss that may provide suitable aggregate for the crushed stone industry, potential quarry operators and various agencies in Heard County. This report is part of a project to study the geology and mineral resources of the Piedmont south of the Brevard Zone, and is not intended to supplant detailed site investigations by industry or consultants. The report is a joint effort between the Georgia Geologic Survey and the Office of Materials and Research of the Georgia Department of Transportation.

The basic instrument for the study of China's population and employment: the labor life table.

PubMed

Jiang, Z

1991-01-01

The data and methods are provided for generating a labor life table for China in 1988. The purpose is to supply a useful instrument for studying, planning, and analyzing employment and social services, welfare programs, and insurance. These tables were constructed using age- and sex-specific employment data from the 1% sample of demographic data for 1987 in 13 nonfarming sectors. Employment was derived from the 1985 Industrial Survey on 2 sectors of the nonfarming population. Urban employment and rural agricultural employment were not calculated because of the imprecision of the data. The age structure has unique characteristic differences between the employment rate curves of the material and nonmaterial production sectors. The peak for the nonmaterial production sector is near 50 years for men and 44 years for women, while the curve for the material sector is more nearly bell-shaped with a peak for females at 20-30 years. The female employment pattern indicates that women continue working after the birth of a child, and women do not return to the work force once they resign. The reasons for the pattern in nonmaterial production are indicated. The method used to calculate the labor life table employs the same methods as the multiple life table approach for mortality, with some modifications. The assumption is a static labor population between the ages of 15-70 years. The age for which employment is the highest is selected; then the number of people employed is generated. Employment beyond the peak age is derived through the % of the labor force in the total population. The arithmetic mean value of the labor force for adjacent age groups is determined by survivors until a particular age. Mean work expectancy years and age-specific cumulative labor force are calculated per the life table method. As data become available, causes of death of the labor force and transfer of labor between sectors and regions may be computed. An example of retirement information is that

The best encouraging persons in labor: A content analysis of Iranian mothers' experiences of labor support

PubMed Central

Fathi Najafi, Tahereh; Latifnejad Roudsari, Robab; Ebrahimipour, Hossein

2017-01-01

Background and aims The process of giving birth is very stressing for the mother. Meanwhile, maternity ward staff’s lack of awareness of mothers’ fears make mothers feel lonely and helpless. This study aimed to explore women’s perceptions of labor support during vaginal delivery. Materials and methods This exploratory qualitative study used qualitative content analysis to explore Iranian mothers’ experiences of labor support. Data were collected using observations and semi-structured interviews with 25 individuals. The participants were recruited through a purposive sampling method. Results Three categories, including “involvement of the spouse in the labor process”, “asking for a companion during labor”, and “mother’s self-care to cope with labor pain”, emerged during data analysis. These categories were merged to form the main theme of “trying to comply with the labor process”. Conclusion Women believed that the presence of a companion, e.g. their husband, a family member, or a doula, during labor helped them better deal with the labor process, particularly when they felt lonely. Health care providers are expected to consider the needs of mothers and try to provide holistic support for mothers during labor pain. Implications for practice It seems that some mothers adopted particular coping strategies without receiving any relevant training. It is noteworthy that although mothers may make every effort to minimize their pain, health professionals should also practice medical approaches to help them through the process of labor. PMID:28683112

Patterns of [PSI+] aggregation allow insights into cellular organization of yeast prion aggregates

PubMed Central

Tyedmers, Jens

2012-01-01

The yeast prion phenomenon is very widespread and mounting evidence suggests that it has an impact on cellular regulatory mechanisms related to phenotypic responses to changing environments. Studying the aggregation patterns of prion amyloids during different stages of the prion life cycle is a first key step to understand major principles of how and where cells generate, organize and turn-over prion aggregates. The induction of the [PSI+] state involves the actin cytoskeleton and quality control compartments such as the Insoluble Protein Deposit (IPOD). An initially unstable transitional induction state can be visualized by overexpression of the prion determinant and displays characteristic large ring- and ribbon-shaped aggregates consisting of poorly fragmented bundles of very long prion fibrils. In the mature prion state, the aggregation pattern is characterized by highly fragmented, shorter prion fibrils that form aggregates, which can be visualized through tagging with fluorescent proteins. The number of aggregates formed varies, ranging from a single large aggregate at the IPOD to multiple smaller ones, depending on several parameters discussed. Aggregate units below the resolution of light microscopy that are detectable by fluorescence correlation spectroscopy are in equilibrium with larger aggregates in this stage and can mediate faithful inheritance of the prion state. Loss of the prion state is often characterized by reduced fragmentation of prion fibrils and fewer, larger aggregates. PMID:22449721

Aggregated Recombinant Human Interferon Beta Induces Antibodies but No Memory in Immune-Tolerant Transgenic Mice

PubMed Central

Sauerborn, Melody; Gilli, Francesca; Brinks, Vera; Schellekens, Huub; Jiskoot, Wim

2010-01-01

ABSTRACT Purpose To study the influence of protein aggregation on the immunogenicity of recombinant human interferon beta (rhIFNβ) in wild-type mice and transgenic, immune-tolerant mice, and to evaluate the induction of immunological memory. Methods RhIFNβ-1b and three rhIFNβ-1a preparations with different aggregate levels were injected intraperitoneally in mice 15× during 3 weeks, and the mice were rechallenged with rhIFNβ-1a. The formation of binding (BABs) and neutralizing antibodies (NABs) was monitored. Results Bulk rhIFNβ-1a contained large, mainly non-covalent aggregates and stressed rhIFNβ-1a mainly covalent, homogeneous (ca. 100 nm) aggregates. Reformulated rhIFNβ-1a was essentially aggregate-free. All products induced BABs and NABs in wild-type mice. Immunogenicity in the transgenic mice was product dependent. RhIFNβ-1b showed the highest and reformulated rhIFNβ-1a the lowest immunogenicity. In contrast with wild-type mice, transgenic mice did not show NABs, nor did they respond to the rechallenge. Conclusions The immunogenicity of the products in transgenic mice, unlike in wild-type mice, varied. In the transgenic mice, neither NABs nor immunological memory developed. The immunogenicity of rhIFNβ in a model reflecting the human immune system depends on the presence and the characteristics of aggregates. PMID:20499141

EPIDURAL ANALGESIA IN LABOR - CONTROVERSIES.

PubMed

Bilić, Nada; Djaković, Ivka; Kličan-Jaić, Katarina; Rudman, Senka Sabolović; Ivanec, Željko

2015-09-01

Labor pain is one of the most severe pains. Labor is a complex and individual process with varying maternal requesting analgesia. Labor analgesia must be safe and accompanied by minimal amount of unwanted consequences for both the mother and the child, as well as for the delivery procedure. Epidural analgesia is the treatment that best meets these demands. According to the American Congress of Obstetrics and Gynecology and American Society of Anesthesiologists, mother's demand is a reason enough for the introduction of epidural analgesia in labor, providing that no contraindications exist. The application of analgesics should not cease at the end of the second stage of labor, but it is recommended that lower concentration analgesics be then applied. Based on the latest studies, it can be claimed that epidural analgesia can be applied during the major part of the first and second stage of labor. According to previous investigations, there is no definitive conclusion about the incidence of instrumental delivery, duration of second stage of labor, time of epidural analgesia initiation, and long term outcomes for the newborn. Cooperation of obstetric and anesthesiology personnel, as well as appropriate technical equipment significantly decrease the need of instrumental completion of a delivery, as well as other complications encountered in the application of epidural analgesia. Our hospital offers 24/7 epidural analgesia service. The majority of pregnant women in our hospital were aware of the advantages of epidural analgesia for labor, however, only a small proportion of them used it, mainly because of inadequate level of information.

Child Labor, Learning Problems, and Poverty

ERIC Educational Resources Information Center

Taylor, Mark

2017-01-01

In Africa, approximately 80 million children are working. Africa's 41% child labor rate is nearly twice as high as that in Asia. This study examined whether child labor is a direct result of poverty or of reading and math problems in school. The study analyzed reading and math scores of 62 child laborers and 62 non-child laborers from a farming…

Marital and Family Characteristics of the Labor Force in March 1973. Special Labor Force Report No. 164.

ERIC Educational Resources Information Center

Hayghe, Howard

This Special Labor Force Report of March 1973, shows a continued decline in labor force participation rates of married men and an increase in rates of married women with young children. It also explores the trends of husbands' and wives' labor force participation, as well as labor force activity of other groups, such as women heads of families and…

A Select Bibliography of Books on Labor Issues.

ERIC Educational Resources Information Center

American Federation of Labor and Congress of Industrial Organizations, Washington, DC.

This annotated bibliography of 90 books on labor issues presents selections in the following areas: labor history, biographies, contemporary issues, labor economics and labor relations, labor law, labor unions, women and work, and reference books. (DB)

The Fair Labor Standards Act. Enforcement of Child Labor Provisions in Massachusetts. Report to the Chairman, Committee on Labor and Human Resources, U.S. Senate.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Div. of Human Resources.

During 1987, investigations of 113 cases of alleged or suspected child labor violations at Massachusetts business establishments were conducted. Thirteen (38 percent) of these were randomly selected for review. Compliance officers in the Department of Labor's Wage and Hour Division substantiated child labor violations in 9 of the 13 cases. A total…

Quantification of alginate by aggregation induced by calcium ions and fluorescent polycations.

PubMed

Zheng, Hewen; Korendovych, Ivan V; Luk, Yan-Yeung

2016-01-01

For quantification of polysaccharides, including heparins and alginates, the commonly used carbazole assay involves hydrolysis of the polysaccharide to form a mixture of UV-active dye conjugate products. Here, we describe two efficient detection and quantification methods that make use of the negative charges of the alginate polymer and do not involve degradation of the targeted polysaccharide. The first method utilizes calcium ions to induce formation of hydrogel-like aggregates with alginate polymer; the aggregates can be quantified readily by staining with a crystal violet dye. This method does not require purification of alginate from the culture medium and can measure the large amount of alginate that is produced by a mucoid Pseudomonas aeruginosa culture. The second method employs polycations tethering a fluorescent dye to form suspension aggregates with the alginate polyanion. Encasing the fluorescent dye in the aggregates provides an increased scattering intensity with a sensitivity comparable to that of the conventional carbazole assay. Both approaches provide efficient methods for monitoring alginate production by mucoid P. aeruginosa. Copyright © 2015 Elsevier Inc. All rights reserved.

Intra-aggregate CO2 enrichment: a modelling approach for aerobic soils

NASA Astrophysics Data System (ADS)

Schlotter, D.; Schack-Kirchner, H.

2013-02-01

CO2 concentration gradients inside soil aggregates, caused by the respiration of soil microorganisms and fungal hyphae, might lead to variations in the soil solution chemistry on a mm-scale, and to an underestimation of the CO2 storage. But, up to now, there seems to be no feasible method for measuring CO2 inside natural aggregates with sufficient spatial resolution. We combined a one-dimensional model for gas diffusion in the inter-aggregate pore space with a cylinder diffusion model, simulating the consumption/production and diffusion of O2 and CO2 inside soil aggregates with air- and water-filled pores. Our model predicts that for aerobic respiration (respiratory quotient = 1) the intra-aggregate increase in the CO2 partial pressure can never be higher than 0.9 kPa for siliceous, and 0.1 kPa for calcaric aggregates, independent of the level of water-saturation. This suggests that only for siliceous aggregates CO2 produced by aerobic respiration might cause a high small-scale spatial variability in the soil solution chemistry. In calcaric aggregates, however, the contribution of carbonate species to the CO2 transport should lead to secondary carbonates on the aggregate surfaces. As regards the total CO2 storage in aerobic soils, both siliceous and calcaric, the effect of intra-aggregate CO2 gradients seems to be negligible. To assess the effect of anaerobic respiration on the intra-aggregate CO2 gradients, the development of a device for measuring CO2 on a mm-scale in soils is indispensable.

Equine cloning: in vitro and in vivo development of aggregated embryos.

PubMed

Gambini, Andrés; Jarazo, Javier; Olivera, Ramiro; Salamone, Daniel F

2012-07-01

The production of cloned equine embryos remains highly inefficient. Embryo aggregation has not yet been tested in the equine, and it might represent an interesting strategy to improve embryo development. This study evaluated the effect of cloned embryo aggregation on in vitro and in vivo equine embryo development. Zona-free reconstructed embryos were individually cultured in microwells (nonaggregated group) or as 2- or 3-embryo aggregates (aggregated groups). For in vitro development, they were cultured until blastocyst stage and then either fixed for Oct-4 immunocytochemical staining or maintained in in vitro culture where blastocyst expansion was measured daily until Day 17 or the day on which they collapsed. For in vivo assays, Day 7-8 blastocysts were transferred to synchronized mares and resultant vesicles, and cloned embryos were measured by ultrasonography. Embryo aggregation improved blastocyst rates on a per well basis, and aggregation did not imply additional oocytes to obtain blastocysts. Embryo aggregation improved embryo quality, nevertheless it did not affect Day 8 and Day 16 blastocyst Oct-4 expression patterns. Equine cloned blastocysts expanded and increased their cell numbers when they were maintained in in vitro culture, describing a particular pattern of embryo growth that was unexpectedly independent of embryo aggregation, as all embryos reached similar size after Day 7. Early pregnancy rates were higher using blastocysts derived from aggregated embryos, and advanced pregnancies as live healthy foals also resulted from aggregated embryos. These results indicate that the strategy of aggregating embryos can improve their development, supporting the establishment of equine cloned pregnancies.

Computational study of aggregation mechanism in human lysozyme[D67H

PubMed Central

Patel, Dharmeshkumar

2017-01-01

Aggregation of proteins is an undesired phenomena that affects both human health and bioengineered products such as therapeutic proteins. Finding preventative measures could be facilitated by a molecular-level understanding of dimer formation, which is the first step in aggregation. Here we present a molecular dynamics (MD) study of dimer formation propensity in human lysozyme and its D67H variant. Because the latter protein aggregates while the former does not, they offer an ideal system for testing the feasibility of the proposed MD approach which comprises three stages: i) partially unfolded conformers involved in dimer formation are generated via high-temperature MD simulations, ii) potential dimer structures are searched using docking and refined with MD, iii) free energy calculations are performed to find the most stable dimer structure. Our results provide a detailed explanation for how a single mutation (D67H) turns human lysozyme from non-aggregating to an aggregating protein. Conversely, the proposed method can be used to identify the residues causing aggregation in a protein, which can be mutated to prevent it. PMID:28467454

National Labor Administration and Democracy in Argentina

DTIC Science & Technology

1987-08-01

accompany economic policy and the mdoernization of the productive apparatus; and promoting greater efficiency in the Ministerio de Trabajo y Seguridad Social...Carri, Sindicatos y Poder en la A-gentina. Buenos Aires: Editorial Sudestaba, 1967; R. Rotundaro, Realidad y Cambio en el Sindicalismo. Buenos Aires...Ministry (Ministerio de Trabajo y Sequridad Social) serves as O. lead agency in the national labor relations system, focus on these variables allows

Effect of aggregate graining compositions on skid resistance of Exposed Aggregate Concrete pavement

NASA Astrophysics Data System (ADS)

Wasilewska, Marta; Gardziejczyk, Wladysław; Gierasimiuk, Pawel

2018-05-01

The paper presents the evaluation of skid resistance of EAC (Exposed Aggregate Concrete) pavements which differ in aggregate graining compositions. The tests were carried out on concrete mixes with a maximum aggregate size of 8 mm. Three types of coarse aggregates were selected depending on their resistance to polishing which was determined on the basis of the PSV (Polished Stone Value). Basalt (PSV 48), gabbro (PSV 50) and trachybasalt (PSV 52) aggregates were chosen. For each type of aggregate three graining compositions were designed, which differed in the content of coarse aggregate > 4mm. Their content for each series was as follows: A - 38%, B - 50% and C - 68%. Evaluation of the skid resistance has been performed using the FAP (Friction After Polishing) test equipment also known as the Wehner/Schulze machine. Laboratory method enables to compare the skid resistance of different types of wearing course under specified conditions simulating polishing processes. In addition, macrotexture measurements were made on the surface of each specimen using the Elatexure laser profile. Analysis of variance showed that at significance level α = 0.05, aggregate graining compositions as well as the PSV have a significant influence on the obtained values of the friction coefficient μm of the tested EAC pavements. The highest values of the μm have been obtained for EAC with the lowest amount of coarse aggregates (compositions A). In these cases the resistance to polishing of the aggregate does not significantly affect the friction coefficients. This is related to the large areas of cement mortar between the exposed coarse grains. Based on the analysis of microscope images, it was observed that the coarse aggregates were not sufficiently exposed. It has been proved that PSV significantly affected the coefficient of friction in the case of compositions B and C. This is caused by large areas of exposed coarse aggregate. The best parameters were achieved for the EAC pavements

Transit labor relations guide

DOT National Transportation Integrated Search

2001-09-01

This report is designed as a guide for those involved in labor relations in the transit industry. It begins with a history of transit labor relations. The economic, political, and legal environment of transit relations is then discussed. A section fo...

Evaluation of Canadian unconfined aggregate freeze-thaw tests for identifying nondurable aggregates.

DOT National Transportation Integrated Search

2012-06-01

Concrete is the most widely used material in construction. Aggregates contribute 60% to 75% of the total volume : of concrete. The aggregates play a key role in concrete durability. The U.S. Midwest has many aggregates that can : show distress in the...

Heat-Induced Soluble Protein Aggregates from Mixed Pea Globulins and β-Lactoglobulin.

PubMed

Chihi, Mohamed-Lazhar; Mession, Jean-luc; Sok, Nicolas; Saurel, Rémi

2016-04-06

The present work investigates the formation of protein aggregates (85 °C, 60 min incubation) upon heat treatment of β-lactoglobulin (βlg)-pea globulins (Glob) mixtures at pH 7.2 and 5 mM NaCl from laboratory-prepared protein isolates. Various βlg/Glob weight ratios were applied, for a total protein concentration of 2 wt % in admixture. Different analytical methods were used to determine the aggregation behavior of "mixed" aggregates, that is, surface hydrophobicity and also sulfhydryl content, protein interactions by means of SDS-PAGE electrophoresis, and molecule size distribution by DLS and gel filtration. The production of "mixed" thermal aggregates would involve both the formation of new disulfide bonds and noncovalent interactions between the denatured βlg and Glob subunits. The majority of "mixed" soluble aggregates displayed higher molecular weight and smaller diameter than those for Glob heated in isolation. The development of pea-whey protein "mixed" aggregates may help to design new ingredients for the control of innovative food textures.

78 FR 1260 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: Prevailing Wage Rates for Certain... Agriculture (USDA) farm production region that includes another State either with its own wage rate finding or...

Traffic-induced changes and processes in forest road aggregate particle-size distributions

Treesearch

Hakjun Rhee; James Fridley; Deborah Page-Dumroese

2018-01-01

Traffic can alter forest road aggregate material in various ways, such as by crushing, mixing it with subgrade material, and sweeping large-size, loose particles (gravel) toward the outside of the road. Understanding the changes and physical processes of the aggregate is essential to mitigate sediment production from forest roads and reduce road maintenance efforts. We...

Emotional labor actors: a latent profile analysis of emotional labor strategies.

PubMed

Gabriel, Allison S; Daniels, Michael A; Diefendorff, James M; Greguras, Gary J

2015-05-01

Research on emotional labor focuses on how employees utilize 2 main regulation strategies-surface acting (i.e., faking one's felt emotions) and deep acting (i.e., attempting to feel required emotions)-to adhere to emotional expectations of their jobs. To date, researchers largely have considered how each strategy functions to predict outcomes in isolation. However, this variable-centered perspective ignores the possibility that there are subpopulations of employees who may differ in their combined use of surface and deep acting. To address this issue, we conducted 2 studies that examined surface acting and deep acting from a person-centered perspective. Using latent profile analysis, we identified 5 emotional labor profiles-non-actors, low actors, surface actors, deep actors, and regulators-and found that these actor profiles were distinguished by several emotional labor antecedents (positive affectivity, negative affectivity, display rules, customer orientation, and emotion demands-abilities fit) and differentially predicted employee outcomes (emotional exhaustion, job satisfaction, and felt inauthenticity). Our results reveal new insights into the nature of emotion regulation in emotional labor contexts and how different employees may characteristically use distinct combinations of emotion regulation strategies to manage their emotional expressions at work. (c) 2015 APA, all rights reserved.

Effect of dance labor on the management of active phase labor pain & clients' satisfaction: a randomized controlled trial study.

PubMed

Abdolahian, Somayeh; Ghavi, Fatemeh; Abdollahifard, Sareh; Sheikhan, Fatemeh

2014-03-30

There are a wide variety of non- pharmacologic pain relief techniques for labor which include pelvic movement, upright position, back massage and partner support during the first stage of labor. The effectiveness of dance labor- which is a combination of these techniques- has not been evaluated. This study aimed to evaluate the effectiveness of dance labor in pain reduction and woman's satisfaction during the first stage of labor. 60 primiparous women aged 18-35 years old were randomly assigned to dance labor and control groups. In the dance labor group, women were instructed to do standing upright with pelvic tilt and rock their hips back and forth or around in a circle while their partner massaged their back and sacrum for a minimum of 30 minutes. In the control group, the participants received usual care during physiologic labor. Pain and satisfaction scores were measured by Visual Analogue Scale. Data were analyzed by using the t. test and Chi-square. Mean pain score in the dance labor group was significantly lower than the control group (P < 0.05). The mean satisfaction score in the dance labor group was significantly higher than in the control group (P < 0.05). Dance labor which is a complementary treatment with low risk can reduce the intensity of pain and increase mothers, satisfaction with care during the active phase of labor.

Flocculation kinetics and aggregate structure of kaolinite mixtures in laminar tube flow.

PubMed

Vaezi G, Farid; Sanders, R Sean; Masliyah, Jacob H

2011-03-01

Flocculation is commonly used in various solid-liquid separation processes in chemical and mineral industries to separate desired products or to treat waste streams. This paper presents an experimental technique to study flocculation processes in laminar tube flow. This approach allows for more realistic estimation of the shear rate to which an aggregate is exposed, as compared to more complicated shear fields (e.g. stirred tanks). A direct sampling method is used to minimize the effect of sampling on the aggregate structure. A combination of aggregate settling velocity and image analysis was used to quantify the structure of the aggregate. Aggregate size, density, and fractal dimension were found to be the most important aggregate structural parameters. The two methods used to determine aggregate fractal dimension were in good agreement. The effects of advective flow through an aggregate's porous structure and transition-regime drag coefficient on the evaluation of aggregate density were considered. The technique was applied to investigate the flocculation kinetics and the evolution of the aggregate structure of kaolin particles with an anionic flocculant under conditions similar to those of oil sands fine tailings. Aggregates were formed using a well controlled two-stage aggregation process. Detailed statistical analysis was performed to investigate the establishment of dynamic equilibrium condition in terms of aggregate size and density evolution. An equilibrium steady state condition was obtained within 90 s of the start of flocculation; after which no further change in aggregate structure was observed. Although longer flocculation times inside the shear field could conceivably cause aggregate structure conformation, statistical analysis indicated that this did not occur for the studied conditions. The results show that the technique and experimental conditions employed here produce aggregates having a well-defined, reproducible structure. Copyright © 2011

DataTrack 7: Women in the Labor Force.

ERIC Educational Resources Information Center

American Council of Life Insurance, Washington, DC.

One of a series that compiles and interprets data from a variety of sources on one particular subject of interest to life insurance executives, this report deals with women in the labor force. It can be used in the design of new products and services, to meet changing consumer needs, the selection of new markets and marketing strategies, for the…

Aggregation, sedimentation, dissolution and bioavailability of ...

EPA Pesticide Factsheets

Due to increasing use in flat screen applications, solar cells, ink–jet printing, and medical devices, cadmium-based quantum dots (QDs) are among the fastest growing classes of engineered nanomaterial. These wide-ranging consumer product applications and end of use disposal issues assure that QDs will eventually enter the marine environment. In an effort to understand the fate and transport of CdSe QDs in estuarine systems, the aggregation, sedimentation, dissolution, and bioavailability of CdSe QDs in seawater was investigated. The size of CdSe QDs increased from 40-60 nm to >1 mm within one hour once introduced to seawater, and the diffusion-limited aggregation led to highly polydispersed aggregates with loose structures. As a result, the sedimentation rate of CdSe QD aggregates in seawater was measured to be 4-10 mm/day, which was slow considering their relatively large size. Humic acid (HA), as a model natural organic matter, further increased the size and polydispersity of CdSe QDs, and slowed their sedimentation accordingly. Given the effect of light on CdSe QDs, natural sunlight and light filters were employed to simulate the photic conditions at different water depths in an estuarine system. It was observed that light played a vital role in promoting the dissolution of CdSe QDs and the release of dissolved Cd. The ZnS shell surrounding the CdSe core also significantly hindered the degradation of CdSe QDs into their ionic components. With sufficient

A practical approach to labor support.

PubMed

Adams, Ellise D; Bianchi, Ann L

2008-01-01

In the United States, intrapartum nurses are present at 99% of births. These nurses have a unique opportunity to positively affect a laboring woman's comfort and labor progress through the use of labor support behaviors. These nonpharmacologic nursing strategies fall into four categories: physical, emotional, instructional/informational, and advocacy. Implementation of these strategies requires special knowledge and a commitment to the enhanced physical and emotional comfort of laboring women.

48 CFR 52.222-19 - Child Labor-Cooperation with Authorities and Remedies.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Text of Provisions and Clauses 52.222-19 Child Labor—Cooperation with Authorities and Remedies. As... Contractor uses forced or indentured child labor in its mining, production, or manufacturing processes. (4...

California's Agribusiness and the Farm Labor Question: The Transition from Asian to Mexican Labor, 1919-1939

ERIC Educational Resources Information Center

Kim, Joon K.

2012-01-01

During the interwar period, California's labor-intensive agriculture transitioned from reliance on diverse immigrants to preference for Mexicans. Political movements to restrict immigration, the Great Depression, and labor unrest compelled farm employers to search for labor that could be used flexibly and deported easily. To achieve this…

A Comparative Study of Spatial Aggregation Methodologies under the BioEarth Framework

NASA Astrophysics Data System (ADS)

Chandrasekharan, B.; Rajagopalan, K.; Malek, K.; Stockle, C. O.; Adam, J. C.; Brady, M.

2014-12-01

The increasing probability of water resource scarcity due to climate change has highlighted the need for adopting an economic focus in modelling water resource uses. Hydro-economic models, developed by integrating economic optimization with biophysical crop models, are driven by the economic value of water, revealing it's most efficient uses and helping policymakers evaluate different water management strategies. One of the challenges in integrating biophysical models with economic models is the difference in the spatial scales in which they operate. Biophysical models that provide crop production functions typically run at smaller scale than economic models, and substantial spatial aggregation is required. However, any aggregation introduces a bias, i.e., a discrepancy between the functional value at the higher spatial scale and the value at the spatial scale of the aggregated units. The objective of this work is to study the sensitivity of net economic benefits in the Yakima River basin (YRB) to different spatial aggregation methods for crop production functions. The spatial aggregation methodologies that we compare involve agro-ecological zones (AEZs) and aggregation levels that reflect water management regimes (e.g. irrigation districts). Aggregation bias can distort the underlying data and result in extreme solutions. In order to avoid this we use an economic optimization model that incorporates the synthetic and historical crop mixes approach (Onal & Chen, 2012). This restricts the solutions between the weighted averages of historical and simulated feasible planting decisions, with the weights associated with crop mixes being treated as endogenous variables. This study is focused on 5 major irrigation districts of the YRB in the Pacific Northwest US. The biophysical modeling framework we use, BioEarth, includes the coupled hydrology and crop growth model, VIC-Cropsyst and an economic optimization model. Preliminary findings indicate that the standard approach

Labor patterns in twin gestations

PubMed Central

Leftwich, Heidi K.; Zaki, Mary N.; Wilkins, Isabelle; Hibbard, Judith U.

2014-01-01

Objective To compare labor progression in twin vs singleton gestations. Study Design Retrospective review of electronic database created by Consortium on Safe Labor, reflecting labor and delivery information from 12 clinical centers 2002-2008. Women with twin gestations, cephalic presentation of presenting twin, gestational age ≥34 weeks, with ≥2 cervical examinations were included. Exclusion criteria were fetal anomalies or demise. Singleton controls were selected by the same criteria. Categorical variables were analyzed by χ2; continuous by Student t test. Interval censored regression was used to determine distribution for time of cervical dilation in centimeters, or “traverse times,” and controlled for confounding factors. Repeated-measures analysis constructed mean labor curves by parity and number of fetuses. Results A total of 891 twin gestations were compared with 100,513 singleton controls. Twin gestations were more often older, white or African American, earlier gestational age, increased prepregnancy body mass index, and with lower birthweight. There was no difference in number of prior cesarean deliveries, induction, or augmentation, or epidural use. Median traverse times increased at every centimeter interval in nulliparous twins, in both unadjusted and adjusted analysis (P < .01). A similar pattern was noted for multiparas in both analyses. Labor curves demonstrated a delayed inflection point in the labor pattern for nulliparous and multiparous twin gestations. Conclusion Both nulliparous and multiparous women have slower progression of active phase labor with twins even when controlling for confounding factors. PMID:23871795

Crushed cement concrete substitution for construction aggregates; a materials flow analysis

USGS Publications Warehouse

Kelly, Thomas

1998-01-01

An analysis of the substitution of crushed cement concrete for natural construction aggregates is performed by using a materials flow diagram that tracks all material flows into and out of the cement concrete portion of the products made with cement concrete: highways, roads, and buildings. Crushed cement concrete is only one of the materials flowing into these products, and the amount of crushed cement concrete substituted influences the amount of other materials in the flow. Factors such as availability and transportation costs, as well as physical properties, that can affect stability and finishability, influence whether crushed cement concrete or construction aggregates should be used or predominate for a particular end use.

A Guide to Child Labor Provisions of the Fair Labor Standards Act.

ERIC Educational Resources Information Center

Wage and Hour and Public Contracts Divisions (DOL), Washington, DC.

This revised guide to the child labor provisions of the Fair Labor Standards Act contains general information useful to employers and coordinators of cooperative and work experience programs involving employment of youth under 18 years of age. Included in the document are provisions relating to: (1) age standards, (2) coverage of the act, (3)…

Effect of Dance Labor on the Management of Active Phase Labor Pain & Clients’ Satisfaction: A Randomized Controlled Trial Study

PubMed Central

Abdolahian, Somayeh; Ghavi, Fatemeh; Abdollahifard, Sareh; Sheikhan, Fatemeh

2014-01-01

Background: There are a wide variety of non- pharmacologic pain relief techniques for labor which include pelvic movement, upright position, back massage and partner support during the first stage of labor. The effectiveness of dance labor- which is a combination of these techniques- has not been evaluated. Aim: This study aimed to evaluate the effectiveness of dance labor in pain reduction and woman’s satisfaction during the first stage of labor. Methods: 60 primiparous women aged 18-35 years old were randomly assigned to dance labor and control groups. In the dance labor group, women were instructed to do standing upright with pelvic tilt and rock their hips back and forth or around in a circle while their partner massaged their back and sacrum for a minimum of 30 minutes. In the control group, the participants received usual care during physiologic labor. Pain and satisfaction scores were measured by Visual Analogue Scale. Data were analyzed by using the t. test and Chi-square. Findings: Mean pain score in the dance labor group was significantly lower than the control group (P < 0.05). The mean satisfaction score in the dance labor group was significantly higher than in the control group (P < 0.05). Conclusion: Dance labor which is a complementary treatment with low risk can reduce the intensity of pain and increase mothers, satisfaction with care during the active phase of labor. PMID:24762366

29 CFR 780.315 - Local hand harvest laborers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Local hand harvest laborers. 780.315 Section 780.315 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR STATEMENTS OF GENERAL...) Statutory Provisions § 780.315 Local hand harvest laborers. (a) A requirement of the exemption is that an...

Interactions between extracellular polymeric substances and clay minerals affect soil aggregation

NASA Astrophysics Data System (ADS)

Vogel, Cordula; Rehschuh, Stephanie; Kemi Olagoke, Folasade; Redmile Gordon, Marc; Kalbiltz, Karsten

2017-04-01

Soil aggregation is crucial for carbon (C) sequestration and microbial processes have been recognised as important control of aggregate turnover (formation, stability, and destruction). However, how microorganisms contribute to these processes is still a matter of debate. An enthralling mechanism determining aggregate turnover and therefore C sequestration may be the excretion of extracellular polymeric substances (EPS) as microbial glue, but effects of EPS on aggregation is largely unknown. Moreover, interdependencies between important aggregation factors like the amount of fine-sized particles (clay content), the decomposability of organic matter and the microbial community (size and composition, as well as the excretion of EPS) are still poorly understood. Therefore, we studied the complex interactions between these factors and their role in aggregate turnover. It was hypothesized that an increase in microbial activity, induced by the input of organic substrates, will stimulate EPS production and therefore the formation and stability of aggregates. To test this hypothesis, an incubation experiment has been conducted across a gradient of clay content (montmorillonite) and substrate decomposability (starch and glucose) as main drivers of the microbial activity. A combination of aggregate separation and stability tests were applied. This results will be examined with respect to the obtained microbial parameters (amount and composition of EPS, CO2 emission, microbial biomass, phospholipid fatty acid), to disentangle the mechanisms and factors controlling aggregate turnover affected by soil microorganisms. This study is expected to provide insights on the role of EPS in the stability of aggregates. Thus, the results of this study will provide an improved understanding of the underlying processes of aggregate turnover in soils, which is necessary to implement strategies for enhanced C sequestration in agricultural soils.

A Novel Method to Quantify Soil Aggregate Stability by Measuring Aggregate Bond Energies

NASA Astrophysics Data System (ADS)

Efrat, Rachel; Rawlins, Barry G.; Quinton, John N.; Watts, Chris W.; Whitmore, Andy P.

2016-04-01

Soil aggregate stability is a key indicator of soil quality because it controls physical, biological and chemical functions important in cultivated soils. Micro-aggregates are responsible for the long term sequestration of carbon in soil, therefore determine soils role in the carbon cycle. It is thus vital that techniques to measure aggregate stability are accurate, consistent and reliable, in order to appropriately manage and monitor soil quality, and to develop our understanding and estimates of soil as a carbon store to appropriately incorporate in carbon cycle models. Practices used to assess the stability of aggregates vary in sample preparation, operational technique and unit of results. They use proxies and lack quantification. Conflicting results are therefore drawn between projects that do not provide methodological or resultant comparability. Typical modern stability tests suspend aggregates in water and monitor fragmentation upon exposure to an un-quantified amount of ultrasonic energy, utilising a laser granulometer to measure the change in mean weight diameter. In this project a novel approach has been developed based on that of Zhu et al., (2009), to accurately quantify the stability of aggregates by specifically measuring their bond energies. The bond energies are measured operating a combination of calorimetry and a high powered ultrasonic probe, with computable output function. Temperature change during sonication is monitored by an array of probes which enables calculation of the energy spent heating the system (Ph). Our novel technique suspends aggregates in heavy liquid lithium heteropolytungstate, as opposed to water, to avoid exposing aggregates to an immeasurable disruptive energy source, due to cavitation, collisions and clay swelling. Mean weight diameter is measured by a laser granulometer to monitor aggregate breakdown after successive periods of calculated ultrasonic energy input (Pi), until complete dispersion is achieved and bond

[Labor rights and the organization of workers in a context of change in labor relations: effects on health workers].

PubMed

Pessanha, Elina Gonçalves da Fonte; Artur, Karen

2013-06-01

This paper presents the main institutional changes in labor relations in Brazil, highlighting their impact on the organization of workers. A more recent central change is the regulation of outsourcing by the Labor Judiciary. Research into claims in the Superior Labor Court, guidelines from the Labor Prosecution Office, and trade union lawsuits, show that outsourcing and working hours are subjects which have directly affected health workers. By addressing the institutional principles of justice in contracts, it was concluded that labor reform should deal with the inequality of rights that have characterized the Brazilian labor market.

Black tattoo inks induce reactive oxygen species production correlating with aggregation of pigment nanoparticles and product brand but not with the polycyclic aromatic hydrocarbon content.

PubMed

Høgsberg, Trine; Jacobsen, Nicklas Raun; Clausen, Per Axel; Serup, Jørgen

2013-07-01

Black tattoo inks are composed of carbon nanoparticles, additives and water and may contain polycyclic aromatic hydrocarbons (PAHs). We aimed to clarify whether reactive oxygen species (ROS) induced by black inks in vitro is related to pigment chemistry, physico-chemical properties of the ink particles and the content of chemical additives and contaminants including PAHs. The study included nine brands of tattoo inks of six colours each (black, red, yellow, blue, green and white) and two additional black inks of different brands (n = 56). The ROS formation potential was determined by the dichlorofluorescein (DCFH) assay. A semiquantitative method was developed for screening extractable organic compounds in tattoo ink based on gas chromatography-mass spectrometry (GC-MS) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). Two black inks produced high amounts of ROS. Peroxyl radicals accounted for up to 72% of the free radicals generated, whereas hydroxyl radicals and H₂O₂ accounted for <14% and 16%, respectively. The same two inks aggregated strongly in water in contrast to the other black inks. They did not exhibit any shared pattern in PAHs and other organic substances. Aggregation was exclusively shared by all ink colours belonging to the same two brands. Ten of 11 black inks had PAH concentrations exceeding the European Council's recommended level, and all 11 exceeded the recommended level for benzo(a)pyrene. It is a new finding that aggregation of tattoo pigment particles correlates with ROS production and brand, independently of chemical composition including PAHs. ROS is hypothesized to be implicated in minor clinical symptoms. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The shape of uterine contractions and labor progress in the spontaneous active labor.

PubMed

Ebrahimzadeh Zagami, Samira; Golmakani, Nahid; Saadatjoo, Seyyed Ali-Reza; Ghomian, Nayyereh; Baghbani, Behjat

2015-03-01

Dystocia is the most common indication of primary cesarean section. The most common cause of dystocia is uterine dysfunction. In prolonged labor, more attention is usually paid to the fetus and pelvis rather than to the role of uterine contractions in a delivery. Therefore, we decided to determine the relationship between the labor progress and uterine contractions shapes. In this cross-sectional study, 200 primiparous women participated having a single pregnancy and cephalic presentation. Uterus contractions were recorded using electronic fetal monitoring at the beginning of the active phase of labor (dilatation 3-5 cm) for 30 min. Fall to rise (F:R) ratio was calculated by determining the duration of returning from a contraction peak to its baseline (fall) and the duration of the rise time from baseline to peak (rise) in two groups. The data were analyzed using t-test and Chi-square test. In this study, 162 women had a normal delivery and 38 women had a cesarean (CS) delivery due to the lack of labor progress. The average F:R ratio was 1.13±0.193 seconds in the vaginal delivery group and 1.64±0.301 seconds in the CS group. This difference was statistically significant (P<0.001). The frequency of contractions in the vaginal delivery group was more than the CS group (P=0.008). Our findings demonstrated that uterine contractions shapes change; and F:R ratio was higher in the group that lacked labor progress. Therefore, contraction shapes can be used to predict the labor progress.

Performance and durability of concrete made with demolition waste and artificial fly ash-clay aggregates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zakaria, M.; Cabrera, J.G.

1996-12-31

Demolition aggregates and artificial aggregates made with waste materials are two alternatives being studied for replacement of natural aggregates in the production of concrete. Natural aggregate sources in Europe are increasingly scarce and subject to restrictions based on environmental regulations. In many areas of the developing world sources of good quality aggregates are very limited or practically not available and therefore it has become necessary to study alternative materials. This paper presents a laboratory study on the use of demolition bricks and artificial aggregates made from fly ash-clay as coarse aggregates to make concrete. The concretes made either with demolitionmore » bricks or artificial aggregates are compared with a control mix made with natural gravel aggregates. The strength and durability characteristics of these concretes are evaluated using as a criteria compressive strength and transport properties, such as gas and water permeability. The results show clearly that concretes of good performance and durability can be produced using aggregates from demolition rubble or using artificial aggregates made with wastes such as fly ash.« less

The Decline of Industrial Unionism in the Meatpacking Industry: Event-Structure Analyses of Labor Unrest, 1946-1987.

ERIC Educational Resources Information Center

Brueggemann, John; Brown, Cliff

2003-01-01

A study of the United Packinghouse Workers of America compared the postwar years and the Reagan era. Using event-structure analysis, the development of new corporate strategies (new technologies, production reorganization, cheap nonunion labor) fundamentally transformed the capital-labor relationship and led to the collapse of industrial unionism…

The durability of concrete containing recycled tyres as a partial replacement of fine aggregate

NASA Astrophysics Data System (ADS)

Syamir Senin, Mohamad; Shahidan, Shahiron; Syazani Leman, Alif; Othman, Nurulain; Shamsuddin, Shamrul-mar; Ibrahim, M. H. W.; Zuki, S. S. Mohd

2017-11-01

Nowadays, uncontrolled disposal of waste materials such as tyres can affect the environment. Therefore, careful management of waste disposal must be done in order to conserve the environment. Waste tyres can be use as a replacement for both fine aggregate and coarse aggregate in the production of concrete. This research was conducted to assess the durability of concrete containing recycled tyres which have been crushed into fine fragments to replace fine aggregate in the concrete mix. This study presents an overview of the use of waste rubber as a partial replacement of natural fine aggregate in a concrete mix. 36 concrete cubes measuring 100mm × 100mm × 100mm and 12 concrete cubes measuring 150mm × 150mm × 150mm were prepared and added with different percentages of rubber from recycled tyres (0%, 3%, 5% and 7%) as fine aggregate replacement. The results obtained show that the replacement of fine aggregate with 7% of rubber recorded a compressive strength of 43.7MPa while the addition of 3% of rubber in the concrete sample recorded a high compressive strength of 50.8MPa. This shows that there is a decrease in the strength and workability of concrete as the amount of rubber used a replacement for fine aggregate in concrete increases. On the other hand, the water absorption test indicated that concrete which contains rubber has better water absorption ability. In this study, 3% of rubber was found to be the optimal percentage as a partial replacement for fine aggregate in the production of concrete.

A global perspective on foreign contract labor.

PubMed

Smart, J E; Casco, R R

1988-01-01

This paper provides a general overview on foreign contract labor. The growth in the use of foreign contract labor is described with reference to other types of international labor movements such as 1) illegal, undocumented, or irregular migration; 2) free migration; and 3) permanent settlement migration. Within this general context, the various national advantages and disadvantages of contract labor are outlined. Particular issues like the role of trade unions and the likely future international labor circulation are noted. The 1984 World Labour Report estimates a global stock of almost 22 million foreign workers. Despite lack of reliable data, the size of irregular labor flows is considerable. More than 4 million undocumented workers, primarily Mexicans, can be found in the US alone. Other major flows of illegal labor go from China to Hong Kong, Malaysia to Singapore, Columbia to Venezuela, and poor Arab countries to oil-exporting countries in the Middle East. Laws are often poorly enforced and contradictory. Employers often actively recruit illegal migrants. While permanent migration was formerly the primary source of foreign workers, the numbers migrating in this manner are decreasing significantly. In absolute terms, host countries gain considerably more through the use of contract labor than sending countries. The pervasive commitment of national governments to economic growth is a prime consideration in the decision to import foreign labor. In general, trade unions have created an environment wherein the use of foreign labor in the formal as opposed to the informal labor market is more difficult. The disadvantages of labor export include the costs of family separation, worker exploitation, and cultural alienation. Remittances constitute the most tangible return of labor export. In many countries they have made a very considerable impact on the balance of payments deficit.

Curcumin Attenuates Amyloid-β Aggregate Toxicity and Modulates Amyloid-β Aggregation Pathway.

PubMed

Thapa, Arjun; Jett, Stephen D; Chi, Eva Y

2016-01-20

The abnormal misfolding and aggregation of amyloid-β (Aβ) peptides into β-sheet enriched insoluble deposits initiates a cascade of events leading to pathological processes and culminating in cognitive decline in Alzheimer's disease (AD). In particular, soluble oligomeric/prefibrillar Aβ have been shown to be potent neurotoxins. The naturally occurring polyphenol curcumin has been shown to exert a neuroprotective effect against age-related neurodegenerative diseases such as AD. However, its protective mechanism remains unclear. In this study, we investigated the effects of curcumin on the aggregation of Aβ40 as well as Aβ40 aggregate induced neurotoxicity. Our results show that the curcumin does not inhibit Aβ fibril formation, but rather enriches the population of "off-pathway" soluble oligomers and prefibrillar aggregates that were nontoxic. Curcumin also exerted a nonspecific neuroprotective effect, reducing toxicities induced by a range of Aβ conformers, including monomeric, oligomeric, prefibrillar, and fibrillar Aβ. The neuroprotective effect is possibly membrane-mediated, as curcumin reduced the extent of cell membrane permeabilization induced by Aβ aggregates. Taken together, our study shows that curcumin exerts its neuroprotective effect against Aβ induced toxicity through at least two concerted pathways, modifying the Aβ aggregation pathway toward the formation of nontoxic aggregates and ameliorating Aβ-induced toxicity possibly through a nonspecific pathway.

Comparison Pore Aggregate Levels After Extraction With Solvents Pertamax Plus And Gasoline

NASA Astrophysics Data System (ADS)

Anggraini, Muthia

2017-12-01

Loss of asphalt content extraction results become problems in Field Work For implementing parties. The use of solvents with high octane (pertamax plus) for the extraction, dissolving the asphalt more than gasoline. By comparing the levels of aggregate pores after using solvent extraction pertamax plus compared to gasoline could answer that pertamax plus more solvent dissolves the bitumen compared to gasoline. This study aims to obtain comparative levels of porous aggregate mix AC-WC after using solvent extraction pertamax plus compared to gasoline. This study uses the aggregate that has been extracted from the production of asphalt mixtures, when finisher and after compaction field. The method used is the assay of coarse and fine aggregate pores, extraction of bitumen content to separate the aggregate with bitumen. Results of testing the total absorption after extraction using a solvent preta max plus in the production of asphalt mixtures 0.80%, while gasoline solvent 0.67% deviation occurs 0.13%. In the finisher after the solvent extraction preta max plus 0.77%, while 0.67% gasoline solvent occurs deviation of 0.1%. At the core after extraction and solvent pertamax plus 0.71%, while gasoline solvent 0.60% 0.11% deviation occurs. The total water absorption after extraction using a solvent pertamax plus greater than gasoline. This proves that the solvent dissolves pertamax plus more asphalt than gasoline.

48 CFR 16.602 - Labor-hour contracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Labor-hour contracts. 16... METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Time-and-Materials, Labor-Hour, and Letter Contracts 16.602 Labor-hour contracts. Description. A labor-hour contract is a variation of the time-and-materials...

Photophysics of Zinc Porphyrin Aggregates in Dilute Water-Ethanol Solutions.

PubMed

Stevens, Amy L; Joshi, Neeraj K; Paige, Matthew F; Steer, Ronald P

2017-12-14

Dimeric and multimeric aggregates of a model metalloporphyrin, zinc tetraphenylporphyrin (ZnTPP), have been produced in a controlled manner by incrementally increasing the water content of dilute aqueous ethanol solutions. Steady state absorption, fluorescence emission, and fluorescence excitation spectra have been measured to identify the aggregates present as a function of solvent composition. The dynamics of the excited states of the aggregates produced initially by excitation in the Soret region have been measured by ultrafast fluorescence upconversion techniques. Only the monomer produces measurable emission from S 2 with a picosecond lifetime; all Soret-excited aggregates, including the dimer, decay radiationlessly on a femtosecond time scale. The S 1 state is the only significant product of the radiationless decay of the S 2 state of the excited monomer, and the aggregates also produce substantial quantum yields of S 1 fluorescence when initially excited in the Soret region. The resulting fluorescent aggregates all decay on a subnanosecond time scale, likely by a mechanism that involves dissociation of the excited monomer from the excitonic multimer. The ZnTPP dimers excited at their ground state geometries in the Soret region exhibit a dynamic behavior that is quite different from those produced following noncoherent triplet-triplet annihilation under the same conditions. The important implications of these observations in determining the aggregation conditions promoting efficient photon upconversion by excitonic annihilation in a variety of media are thoroughly discussed.

Maternal inflammatory markers and term labor performance.

PubMed

Cierny, Jill T; Unal, E Ramsey; Flood, Pamela; Rhee, Ka Young; Praktish, Allison; Olson, Tara Hudak; Goetzl, Laura

2014-05-01

We sought to examine the relationship between maternal markers of inflammation and labor performance. A nested cohort study was performed utilizing an established cohort of term nulliparous patients. Maternal blood was collected at the onset of regular, painful contractions in patients undergoing labor induction or at admission in patients with spontaneous labor. Levels of cytokines including interleukin (IL)-1, IL-6, and tumor necrosis factor-α were determined using standard multiplex methodology. Maternal demographic data were collected prospectively. Detailed retrospective chart review was performed to extract data on cervical dilation, effacement, and station during labor. Subjects were excluded if they failed to achieve complete dilation. Mixed effects modeling was used to examine the association between serum cytokine quartiles and labor progress in the latent and active phases. In all, 334 women were included in our analysis. The lowest quartile of IL-6 was associated with slower latent labor (P = .001). In contrast, the highest quartiles of IL-1 and tumor necrosis factor-α were associated with slower active labor (P = .03 and .0002, respectively). Proinflammatory activation is important in labor initiation. However, once active labor is established, excess inflammation can be detrimental to efficient labor progress. These data may explain, in part, the known associations among clinical chorioamnionitis, cesarean delivery, and postpartum hemorrhage. Copyright © 2014 Mosby, Inc. All rights reserved.

Proteins aggregation and human diseases

NASA Astrophysics Data System (ADS)

Hu, Chin-Kun

2015-04-01

Many human diseases and the death of most supercentenarians are related to protein aggregation. Neurodegenerative diseases include Alzheimer's disease (AD), Huntington's disease (HD), Parkinson's disease (PD), frontotemporallobar degeneration, etc. Such diseases are due to progressive loss of structure or function of neurons caused by protein aggregation. For example, AD is considered to be related to aggregation of Aβ40 (peptide with 40 amino acids) and Aβ42 (peptide with 42 amino acids) and HD is considered to be related to aggregation of polyQ (polyglutamine) peptides. In this paper, we briefly review our recent discovery of key factors for protein aggregation. We used a lattice model to study the aggregation rates of proteins and found that the probability for a protein sequence to appear in the conformation of the aggregated state can be used to determine the temperature at which proteins can aggregate most quickly. We used molecular dynamics and simple models of polymer chains to study relaxation and aggregation of proteins under various conditions and found that when the bending-angle dependent and torsion-angle dependent interactions are zero or very small, then protein chains tend to aggregate at lower temperatures. All atom models were used to identify a key peptide chain for the aggregation of insulin chains and to find that two polyQ chains prefer anti-parallel conformation. It is pointed out that in many cases, protein aggregation does not result from protein mis-folding. A potential drug from Chinese medicine was found for Alzheimer's disease.

29 CFR 402.2 - Labor organization initial information report.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 2 2014-07-01 2014-07-01 false Labor organization initial information report. 402.2... LABOR LABOR-MANAGEMENT STANDARDS LABOR ORGANIZATION INFORMATION REPORTS § 402.2 Labor organization initial information report. Every labor organization shall file a report signed by its president and...

29 CFR 402.2 - Labor organization initial information report.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 2 2010-07-01 2010-07-01 false Labor organization initial information report. 402.2... LABOR LABOR-MANAGEMENT STANDARDS LABOR ORGANIZATION INFORMATION REPORTS § 402.2 Labor organization initial information report. Every labor organization shall file a report signed by its president and...

29 CFR 402.2 - Labor organization initial information report.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 2 2011-07-01 2011-07-01 false Labor organization initial information report. 402.2... LABOR LABOR-MANAGEMENT STANDARDS LABOR ORGANIZATION INFORMATION REPORTS § 402.2 Labor organization initial information report. Every labor organization shall file a report signed by its president and...

29 CFR 402.2 - Labor organization initial information report.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 2 2013-07-01 2013-07-01 false Labor organization initial information report. 402.2... LABOR LABOR-MANAGEMENT STANDARDS LABOR ORGANIZATION INFORMATION REPORTS § 402.2 Labor organization initial information report. Every labor organization shall file a report signed by its president and...

29 CFR 402.2 - Labor organization initial information report.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 2 2012-07-01 2012-07-01 false Labor organization initial information report. 402.2... LABOR LABOR-MANAGEMENT STANDARDS LABOR ORGANIZATION INFORMATION REPORTS § 402.2 Labor organization initial information report. Every labor organization shall file a report signed by its president and...

Red blood cell generation by three-dimensional aggregate cultivation of late erythroblasts.

PubMed

Lee, EunMi; Han, So Yeon; Choi, Hye Sook; Chun, Bokhwan; Hwang, Byunghee; Baek, Eun Jung

2015-02-01

Stem cell-derived erythroid cells hold great potential for the treatment of blood-loss anemia and for erythropoiesis research; however, cultures using conventional flat plates or bioreactors have failed to show promising results. By mimicking the in vivo bone marrow (BM) environment in which most erythroid cells are physically aggregated, we show that a three-dimensional (3D) aggregate culture system facilitates erythroid cell maturation and red blood cell (RBC) production more effectively than two-dimensional high-density cell cultivation. Late erythroblasts (polychromatic or orthochromatic erythroblasts) were differentiated from cord blood CD34(+) cells over 15 days and then allowed to form tight aggregates at a minimum density of 1×10(7) cells/mL for 2-3 days. To scale up the cell culture and to make the media supply efficient throughout the cell aggregates, several macroporous microcarriers and porous scaffolds were applied to the 3D culture system. In comparison to control culture conditions, erythroid cells in 3D aggregates were significantly more differentiated toward RBCs with significantly reduced nuclear dysplasia. When 3D culture was performed inside macroporous microcarriers, the cell culture scale was increased and cells exhibited enhanced differentiation and enucleation. Microcarriers with a pore diameter of approximately 400 μm produced more mature cells than those with a smaller pore diameter. In addition, this aggregate culture method minimized the culture space and media volume required. In conclusion, a 3D aggregate culture system can be used to generate transfusable human erythrocytes at the terminal maturation stage, mimicking the in vivo BM microenvironment. Porous structures can efficiently maximize the culture scale, enabling large-scale production of RBCs. These results enhance our understanding of the importance of physical contact among late erythroblasts for their final maturation into RBCs.

22 CFR 901.19 - Labor organization.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Labor organization. 901.19 Section 901.19 Foreign Relations FOREIGN SERVICE GRIEVANCE BOARD GENERAL Meanings of Terms As Used in This Chapter § 901.19 Labor organization. Labor organization means any employee organization accorded recognition as the...

20 CFR 652.9 - Labor disputes.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Labor disputes. 652.9 Section 652.9 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR ESTABLISHMENT AND FUNCTIONING OF STATE EMPLOYMENT SERVICES Employment Service Operations § 652.9 Labor disputes. (a) State agencies shall make no...

43 CFR 20.512 - Labor practices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Labor practices. 20.512 Section 20.512... Other Employee Conduct Provisions § 20.512 Labor practices. Employees are prohibited from striking... with employee organizations is found in the Department Manual, Part 370, Chapter 711, Labor Management...

48 CFR 1422.101-3 - Reporting labor disputes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Reporting labor disputes... SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 1422.101-3 Reporting labor disputes. Labor disputes that may interfere with contract performance shall be reported to...

Comparison of induction of labor methods for unfavorable cervices in trial of labor after cesarean delivery.

PubMed

Shah, Utsavi; Bellows, Patricia; Drexler, Kathleen; Hawley, Lauren; Davidson, Christina; Sangi-Haghpeykar, Haleh; Gandhi, Manisha

2017-05-01

To compare induction of labor methods in patients attempting a trial of labor after cesarean (TOLAC) with an unfavorable cervix. This is a retrospective cohort study from patients attempting TOLAC from 2009 to 2013. Patients with a simplified Bishop score of three or less where labor was initiated with either a Cook balloon or oxytocin were included. Our primary outcome was mode of delivery. Our secondary outcomes included duration of labor and multiple maternal and neonatal morbidities. Two-hundred and fourteen women met inclusion criteria: 150 received oxytocin and 64 had the Cook balloon placed. The vaginal birth after cesarean delivery rate was significantly higher in the oxytocin group at 70.7% versus 50.0% in the Cook balloon group (p = 0.004). In the multivariable analysis, odds for cesarean delivery were two times higher with the Cook balloon than with oxytocin (Adjusted OR = 2.09, 95% CI = 1.05-4.18, p = 0.036). The duration of labor was longer with the Cook balloon versus oxytocin (21.9 versus 16.3 hours, p = 0.0002). There were no significant differences in maternal and neonatal health outcomes. Oxytocin induction of labor was associated with a higher rate of vaginal delivery and a shorter duration of labor compared to the Cook balloon in women undergoing TOLAC with an unfavorable cervix.

What's Happening to American Labor Force and Productivity Measurements? Proceedings of a Conference Sponsored by the National Council on Employment Policy (Washington, D.C., June 17, 1982).

ERIC Educational Resources Information Center

Upjohn (W.E.) Inst. for Employment Research, Kalamazoo, MI.

This volume contains four papers presented at a 1982 conference sponsored by the National Council on Employment Policy. It begins with a brief policy statement warning that labor force and productivity data systems face deterioration because of budget cuts that have forced a decline in the quality and quantity of the published information and…

Effects of maximum aggregate size on UPV of brick aggregate concrete.

PubMed

Mohammed, Tarek Uddin; Mahmood, Aziz Hasan

2016-07-01

Investigation was carried out to study the effects of maximum aggregate size (MAS) (12.5mm, 19.0mm, 25.0mm, 37.5mm, and 50.0mm) on ultrasonic pulse velocity (UPV) of concrete. For investigation, first class bricks were collected and broken to make coarse aggregate. The aggregates were tested for specific gravity, absorption capacity, unit weight, and abrasion resistance. Cylindrical concrete specimens were made with different sand to aggregate volume ratio (s/a) (0.40 and 0.45), W/C ratio (0.45, 0.50, and 0.55), and cement content (375kg/m(3) and 400kg/m(3)). The specimens were tested for compressive strength and Young's modulus. UPV through wet specimen was measured using Portable Ultrasonic Non-destructive Digital Indicating Tester (PUNDIT). Results indicate that the pulse velocity through concrete increases with an increase in MAS. Relationships between UPV and compressive strength; and UPV and Young's modulus of concrete are proposed for different maximum sizes of brick aggregate. Copyright © 2016 Elsevier B.V. All rights reserved.

Memantine inhibits β-amyloid aggregation and disassembles preformed β-amyloid aggregates.

PubMed

Takahashi-Ito, Kaori; Makino, Mitsuhiro; Okado, Keiko; Tomita, Taisuke

2017-11-04

Memantine, an uncompetitive glutamatergic N-methyl-d-aspartate (NMDA) receptor antagonist, is widely used as a medication for the treatment of Alzheimer's disease (AD). We previously reported that chronic treatment of AD with memantine reduces the amount of insoluble β-amyloid (Aβ) and soluble Aβ oligomers in animal models of AD. The mechanisms by which memantine reduces Aβ levels in the brain were evaluated by determining the effect of memantine on Aβ aggregation using thioflavin T and transmission electron microscopy. Memantine inhibited the formation of Aβ(1-42) aggregates in a concentration-dependent manner, whereas amantadine, a structurally similar compound, did not affect Aβ aggregation at the same concentrations. Furthermore, memantine inhibited the formation of different types of Aβ aggregates, including Aβs carrying familial AD mutations, and disaggregated preformed Aβ(1-42) fibrils. These results suggest that the inhibition of Aβ aggregation and induction of Aβ disaggregation may be involved in the mechanisms by which memantine reduces Aβ deposition in the brain. Copyright © 2017 Elsevier Inc. All rights reserved.

Child Labor: Labor Can Strengthen Its Efforts To Protect Children Who Work. Report to the Chairman, Subcommittee on Labor, Health and Human Services, and Education, Committee on Appropriations, U.S. Senate.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC.

Occupational safety and health data and labor statistics were evaluated in order to update a 1991 report on child labor. Data were from the Bureau of Labor Statistics; Department of Health and Human Services; National Institutes for Occupational Safety and Health (NIOSH); the Department of Labor's (DOL's) investigations database and individual…

Aggregate exposure modelling of zinc pyrithione in rinse-off personal cleansing products using a person-orientated approach with market share refinement.

PubMed

Tozer, Sarah A; Kelly, Seamus; O'Mahony, Cian; Daly, E J; Nash, J F

2015-09-01

Realistic estimates of chemical aggregate exposure are needed to ensure consumer safety. As exposure estimates are a critical part of the equation used to calculate acceptable "safe levels" and conduct quantitative risk assessments, methods are needed to produce realistic exposure estimations. To this end, a probabilistic aggregate exposure model was developed to estimate consumer exposure from several rinse off personal cleansing products containing the anti-dandruff preservative zinc pyrithione. The model incorporates large habits and practices surveys, containing data on frequency of use, amount applied, co-use along with market share, and combines these data at the level of the individual based on subject demographics to better estimate exposure. The daily-applied exposure (i.e., amount applied to the skin) was 3.79 mg/kg/day for the 95th percentile consumer. The estimated internal dose for the 95th percentile exposure ranged from 0.01-1.29 μg/kg/day after accounting for retention following rinsing and dermal penetration of ZnPt. This probabilistic aggregate exposure model can be used in the human safety assessment of ingredients in multiple rinse-off technologies (e.g., shampoo, bar soap, body wash, and liquid hand soap). In addition, this model may be used in other situations where refined exposure assessment is required to support a chemical risk assessment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Labor and the Schools.

ERIC Educational Resources Information Center

American Federation of Labor and Congress of Industrial Organizations, Washington, DC.

Recent studies confirm that organized labor's role in society does not get fair treatment in the social studies and American history courses of the nation's schools. The report covers the first stage of AFL-CIO efforts in dealing with this problem, bringing together concerned persons in labor and education. Following the opening of the conference…

Interference between Coulombic and CT-mediated couplings in molecular aggregates: H- to J-aggregate transformation in perylene-based π-stacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hestand, Nicholas J.; Spano, Frank C.

2015-12-28

The spectroscopic differences between J and H-aggregates are traditionally attributed to the spatial dependence of the Coulombic coupling, as originally proposed by Kasha. However, in tightly packed molecular aggregates wave functions on neighboring molecules overlap, leading to an additional charge transfer (CT) mediated exciton coupling with a vastly different spatial dependence. The latter is governed by the nodal patterns of the molecular LUMOs and HOMOs from which the electron (t{sub e}) and hole (t{sub h}) transfer integrals derive. The sign of the CT-mediated coupling depends on the sign of the product t{sub e}t{sub h} and is therefore highly sensitive tomore » small (sub-Angstrom) transverse displacements or slips. Given that Coulombic and CT-mediated couplings exist simultaneously in tightly packed molecular systems, the interference between the two must be considered when defining J and H-aggregates. Generally, such π-stacked aggregates do not abide by the traditional classification scheme of Kasha: for example, even when the Coulomb coupling is strong the presence of a similarly strong but destructively interfering CT-mediated coupling results in “null-aggregates” which spectroscopically resemble uncoupled molecules. Based on a Frenkel/CT Holstein Hamiltonian that takes into account both sources of electronic coupling as well as intramolecular vibrations, vibronic spectral signatures are developed for integrated Frenkel/CT systems in both the perturbative and resonance regimes. In the perturbative regime, the sign of the lowest exciton band curvature, which rigorously defines J and H-aggregation, is directly tracked by the ratio of the first two vibronic peak intensities. Even in the resonance regime, the vibronic ratio remains a useful tool to evaluate the J or H nature of the system. The theory developed is applied to the reversible H to J-aggregate transformations recently observed in several perylene bisimide systems.« less

24 CFR 200.33 - Labor standards

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Labor standards 200.33 Section 200... Eligibility Requirements for Existing Projects Miscellaneous Cross Cutting Regulations § 200.33 Labor standards (a) The requirements set forth in 29 CFR parts 1, 3 and 5 for compliance with labor standards laws...

Expression of organophosphorus-degradation gene ( opd) in aggregating and non-aggregating filamentous nitrogen-fixing cyanobacteria

NASA Astrophysics Data System (ADS)

Li, Qiong; Tang, Qing; Xu, Xudong; Gao, Hong

2010-11-01

Genetic engineering in filamentous N2-fixing cyanobacteria usually involves Anabaena sp. PCC 7120 and several other non-aggregating species. Mass culture and harvest of such species are more energy consuming relative to aggregating species. To establish a gene transfer system for aggregating species, we tested many species of Anabaena and Nostoc, and identified Nostoc muscorum FACHB244 as a species that can be genetically manipulated using the conjugative gene transfer system. To promote biodegradation of organophosphorus pollutants in aquatic environments, we introduced a plasmid containing the organophosphorus-degradation gene ( opd) into Anabaena sp. PCC 7120 and Nostoc muscorum FACHB244 by conjugation. The opd gene was driven by a strong promoter, P psbA . From both species, we obtained transgenic strains having organophosphorus-degradation activities. At 25°C, the whole-cell activities of the transgenic Anabaena and Nostoc strains were 0.163±0.001 and 0.289±0.042 unit/μg Chl a, respectively. However, most colonies resulting from the gene transfer showed no activity. PCR and DNA sequencing revealed deletions or rearrangements in the plasmid in some of the colonies. Expression of the green fluorescent protein gene from the same promoter in Anabaena sp. PCC 7120 showed similar results. These results suggest that there is the potential to promote the degradation of organophosphorus pollutants with transgenic cyanobacteria and that selection of high-expression transgenic colonies is important for genetic engineering of Anabaena and Nostoc species. For the first time, we established a gene transfer and expression system in an aggregating filamentous N2-fixing cyanobacterium. The genetic manipulation system of Nostoc muscorum FACHB244 could be utilized in the elimination of pollutants and large-scale production of valuable proteins or metabolites.

The thermal aggregation of ovalbumin as large particles decreases its allergenicity for egg allergic patients and in a murine model.

PubMed

Claude, M; Lupi, R; Bouchaud, G; Bodinier, M; Brossard, C; Denery-Papini, S

2016-07-15

Most egg-allergic children can tolerate extensively cooked eggs. Ovalbumin, a major allergen in egg whites, is prone to aggregate upon heating. This study compares ovalbumin's allergenicity when it is aggregated as large particles to ovalbumin in its native form. Immunoglobulins (Ig)-binding and the degranulation capacities of native and aggregated ovalbumin were measured with sera from egg-allergic children and from mice sensitized to native or aggregated ovalbumin. The influence of ovalbumin structure on Ig production upon sensitization and elicitation potency by challenge was also studied. We showed that heat aggregation of ovalbumin as large particles enhances IgG production and promotes IgG2a production (a shift toward the T helper 1 profile). Aggregated ovalbumin displayed lower Ig-binding and basophil-activation capacities for sera from both allergic patients and mice. This work illustrates the links between ovalbumin structure after heating and allergenicity potential using parameters from both the sensitization and elicitation phases of the allergic reaction. Copyright © 2016 Elsevier Ltd. All rights reserved.

29 CFR 780.315 - Local hand harvest laborers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Agriculture That Is Exempted From the Minimum Wage and Overtime Pay Requirements Under Section 13(a)(6... 29 Labor 3 2010-07-01 2010-07-01 false Local hand harvest laborers. 780.315 Section 780.315 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR STATEMENTS OF GENERAL...

Labor market work and home care's unpaid caregivers: a systematic review of labor force participation rates, predictors of labor market withdrawal, and hours of work.

PubMed

Lilly, Meredith B; Laporte, Audrey; Coyte, Peter C

2007-12-01

As people continue to age and receive complex health care services at home, concern has arisen about the availability of family caregivers and their ability to combine employment with caregiving. This article evaluates the international research on unpaid caregivers and their labor market choices, highlighting three conclusions: first, caregivers in general are equally as likely to be in the labor force as noncaregivers; second, caregivers are more likely to work fewer hours in the labor market than noncaregivers, particularly if their caring commitments are heavy; and finally, only those heavily involved in caregiving are significantly more likely to withdraw from the labor market than noncaregivers. Policy recommendations are targeting greater access to formal care for "intensive" caregivers and developing workplace policies for employed caregivers.

Labor Market Work and Home Care's Unpaid Caregivers: A Systematic Review of Labor Force Participation Rates, Predictors of Labor Market Withdrawal, and Hours of Work

PubMed Central

Lilly, Meredith B; Laporte, Audrey; Coyte, Peter C

2007-01-01

As people continue to age and receive complex health care services at home, concern has arisen about the availability of family caregivers and their ability to combine employment with caregiving. This article evaluates the international research on unpaid caregivers and their labor market choices, highlighting three conclusions: first, caregivers in general are equally as likely to be in the labor force as noncaregivers; second, caregivers are more likely to work fewer hours in the labor market than noncaregivers, particularly if their caring commitments are heavy; and finally, only those heavily involved in caregiving are significantly more likely to withdraw from the labor market than noncaregivers. Policy recommendations are targeting greater access to formal care for “intensive” caregivers and developing workplace policies for employed caregivers. PMID:18070333

Metal concentrations in aggregate interiors, exteriors, whole aggregates, and bulk of Costa Rican soils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilcke, W.; Kretzschmar, S.; Bundt, M.

1999-10-01

In many temperate soils the preferential weathering and leaching of aggregate surfaces and the nonaggregated material between aggregates depletes geogenic metals. It also shifts metals from strongly to more weakly bound metal forms. Deposited metals are sorbed preferentially on aggregate surfaces and between aggregates. The authors examined whether preferential desilication under tropical climate causes an enrichment in the aggregate exteriors in oxidic forms of metals. They also studied where deposited metals are bound in these soils. Aggregates (2--20 mm) were selected manually from the A horizons of eight Oxisols, six Andisols, two Mollisols, and two Inceptisols in Costa Rica. Allmore » samples were fractionated into interior and exterior portions and treated with a seven-step sequence to extract Al, Cd, Cu, Fe, Mn, Pb, and Zn. Total concentrations of all metals except Zn were higher in the aggregate exteriors than in the interiors. The average Cd and Pb concentrations in easily extractable fractions were significantly higher in the aggregate exteriors. There were no significant differences in metal partitioning between interiors and exteriors except for Pb, which had higher proportions in extractable forms with NH{sub 2}OH {center{underscore}dot} HCl {gt} NH{sub 4} - acetate, pH 6.0 {gt} EDTA in the exteriors. There were few significant differences in metal concentrations and partitioning between bulk soil and whole aggregates. The results may be explained by (i) preferential desilication of the aggregate exteriors and (ii) preferential sorption of deposited heavy metals mainly in easily extractable forms.« less

The assessment of labor: a brief history.

PubMed

Cohen, Wayne R; Friedman, Emanuel A

2018-01-26

In the 1930s, investigators in the US, Germany and Switzerland made the first attempts to quantify the course of labor in a clinically meaningful way. They emphasized the rupture of membranes as a pivotal event governing labor progress. Attention was also placed on the total number of contractions as a guide to normality. Beginning in the 1950s, Friedman determined that changes in cervical dilatation and fetal station over time were the most useful parameters for the assessment of labor progress. He showed all normal labors had similar patterns of dilatation and descent, differing only in the durations and slopes of their component parts. These observations led to the formulation of criteria that elevated the assessment of labor from a rather arbitrary exercise to one guided by scientific objectivity. Researchers worldwide confirmed the basic nature of labor curves and validated their functionality. This system allows us to quantify the effects of parity, analgesia, maternal obesity, prior cesarean, maternal age, and fetal presentation and position on labor. It permits analysis of outcomes associated with labor aberrations, quantifies the effectiveness of treatments and assesses the need for cesarean delivery. Also, dysfunctional labor patterns serve as indicators of short- and long-term risks to offspring. We still lack the necessary translational research to link the physiologic manifestations of uterine contractility with changes in dilatation and descent. Recent efforts to interpret electrohysterographic patterns hold promise in this regard, as does preliminary exploration into the molecular basis of dysfunctional labor. For now, the clinician is best served by a system of labor assessment proposed more than 60 years ago and embellished upon in considerable detail since.

Properties of cold-bonded lightweight artificial aggregate containing bottom ash with different curing regime

NASA Astrophysics Data System (ADS)

Mohamad Ibrahim, Norlia; Nizar Ismail, Khairul; Che Amat, Roshazita; Mohamad Ghazali, Mohamad Iqbal

2018-03-01

Cold-bonded pelletizing technique is frequently used in aggregate manufacturing process as it can minimise the energy consumption. It has contributed to both economical and environmental advantages because it helps to reduce the gas emissions problems. Bottom ash collected from municipal solid waste incineration (MSWI) plant was selected as raw material in this study and was utilised as a partial replacement for cement for artificial aggregate production. Several percentage of ash replacement was selected ranged from 10 to 50%. Aggregate pellets were subjected to different types of curing condition which is room-water (RW), room-room (RR), oven-room (OR) and oven-water (OW) condition. Properties of aggregate pellets were examined to obtain its density, water absorption, aggregate impact value (AIV) and specific gravity (SG). The results indicated that the most efficient curing regime is by exposing the aggregate in RW condition. The optimum aggregate was selected at 20% where it has satisfied the required density of 739.5kg/m3, and classified as strong aggregate with AIV 14. However, the water absorption of aggregate increased proportionately with the increment of ash content.

29 CFR 1952.7 - Product standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Product standards. 1952.7 Section 1952.7 Labor Regulations...) APPROVED STATE PLANS FOR ENFORCEMENT OF STATE STANDARDS General Provisions and Conditions § 1952.7 Product standards. (a) Under section 18(c)(2) of the Act, a State plan must not include standards for products which...

24 CFR 1003.603 - Labor standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Labor standards. 1003.603 Section... § 1003.603 Labor standards. In accordance with the authority under section 107(e)(2) of the Act, the Secretary waives the provisions of section 110 of the Act (Labor Standards) with respect to this part...

3 CFR 13496 - Executive Order 13496 of January 30, 2009. Notification of Employee Rights Under Federal Labor Laws

Code of Federal Regulations, 2010 CFR

2010-01-01

...' productivity is enhanced when workers are well informed of their rights under Federal labor laws, including the... are informed of such rights under Federal labor laws facilitates the efficient and economical... collective bargaining agreements as defined in 5 U.S.C. 7103(a)(8) and purchases under the simplified...

78 FR 40202 - National Council on Federal Labor-Management Relations Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-03

... Executive Order 13522, entitled, ``Creating Labor-Management Forums to Improve Delivery of Government... makes recommendations to the President on innovative ways to improve delivery of services and products to the public while cutting costs and advancing employee interests. The Council is co- chaired by the...

Engineering cell aggregates through incorporated polymeric microparticles.

PubMed

Ahrens, Caroline C; Dong, Ziye; Li, Wei

2017-10-15

Ex vivo cell aggregates must overcome significant limitations in the transport of nutrients, drugs, and signaling proteins compared to vascularized native tissue. Further, engineered extracellular environments often fail to sufficiently replicate tethered signaling cues and the complex architecture of native tissue. Co-cultures of cells with microparticles (MPs) is a growing field directed towards overcoming many of these challenges by providing local and controlled presentation of both soluble and tethered proteins and small molecules. Further, co-cultured MPs offer a mechanism to better control aggregate architecture and even to report key characteristics of the local microenvironment such as pH or oxygen levels. Herein, we provide a brief introduction to established and developing strategies for MP production including the choice of MP materials, fabrication techniques, and techniques for incorporating additional functionality. In all cases, we emphasize the specific utility of each approach to form MPs useful for applications in cell aggregate co-culture. We review established techniques to integrate cells and MPs. We highlight those strategies that promote targeted heterogeneity or homogeneity, and we describe approaches to engineer cell-particle and particle-particle interactions that enhance aggregate stability and biological response. Finally, we review advances in key application areas of MP aggregates and future areas of development. Cell-scaled polymer microparticles (MPs) integrated into cellular aggregates have been shown to be a powerful tool to direct cell response. MPs have supported the development of healthy cartilage, islets, nerves, and vasculature by the maintenance of soluble gradients as well as by the local presentation of tethered cues and diffusing proteins and small molecules. MPs integrated with pluripotent stem cells have directed in vivo expansion and differentiation. Looking forward, MPs are expected to support both the

Labor for thinning--trends and prospects