Science.gov

Sample records for agile combat support

  1. Combat Agility Management System (CAMS)

    NASA Technical Reports Server (NTRS)

    Skow, Andrew; Porada, William

    1994-01-01

    The proper management of energy becomes a complex task in fighter aircraft which have high angle of attack (AOA) capability. Maneuvers at high AOA are accompanied by high bleed rates (velocity decrease), a characteristic that is usually undesirable in a typical combat arena. Eidetics has developed under NASA SBIR Phase 1 and NAVAIR SBIR Phase 2 contracts a system which allows a pilot to more easily and effectively manage the trade-off of energy (airspeed or altitude) for turn rate while not imposing hard limits on the high AOA nose pointing capability that can be so important in certain air combat maneuver situations. This has been accomplished by incorporating a two-stage angle of attack limiter into the flight control laws. The first stage sets a limit on AOA to achieve a limit on the maximum bleed rate (selectable) by limiting AOA to values which are dependent on the aircraft attitude and dynamic pressure (or flight path, velocity, and altitude). The second stage sets an AOA limit near the AOA for C(sub l max). One of the principal benefits of such a system is that it enables a low-experience pilot to become much more proficient at managing his energy. The Phase 2 simulation work is complete, and an exploratory flight test on the F-18 HARV is planned for the Fall of 1994 to demonstrate/validate the concept.

  2. Impact of emerging technologies on future combat aircraft agility

    NASA Technical Reports Server (NTRS)

    Nguyen, Luat T.; Gilert, William P.

    1990-01-01

    The foreseeable character of future within-visual-range air combat entails a degree of agility which calls for the integration of high-alpha aerodynamics, thrust vectoring, intimate pilot/vehicle interfaces, and advanced weapons/avionics suites, in prospective configurations. The primary technology-development programs currently contributing to these goals are presently discussed; they encompass the F-15 Short Takeoff and Landing/Maneuver Technology Demonstrator Program, the Enhanced Fighter Maneuverability Program, the High Angle-of-Attack Technology Program, and the X-29 Technology Demonstrator Program.

  3. Tools for Supporting Distributed Agile Project Planning

    NASA Astrophysics Data System (ADS)

    Wang, Xin; Maurer, Frank; Morgan, Robert; Oliveira, Josyleuda

    Agile project planning plays an important part in agile software development. In distributed settings, project planning is severely impacted by the lack of face-to-face communication and the inability to share paper index cards amongst all meeting participants. To address these issues, several distributed agile planning tools were developed. The tools vary in features, functions and running platforms. In this chapter, we first summarize the requirements for distributed agile planning. Then we give an overview on existing agile planning tools. We also evaluate existing tools based on tool requirements. Finally, we present some practical advices for both designers and users of distributed agile planning tools.

  4. Supporting Agile Development of Authorization Rules for SME Applications

    NASA Astrophysics Data System (ADS)

    Bartsch, Steffen; Sohr, Karsten; Bormann, Carsten

    Custom SME applications for collaboration and workflow have become affordable when implemented as Web applications employing Agile methodologies. Security engineering is still difficult with Agile development, though: heavy-weight processes put the improvements of Agile development at risk. We propose Agile security engineering and increased end-user involvement to improve Agile development with respect to authorization policy development. To support the authorization policy development, we introduce a simple and readable authorization rules language implemented in a Ruby on Rails authorization plugin that is employed in a real-world SME collaboration and workflow application. Also, we report on early findings of the language’s use in authorization policy development with domain experts.

  5. Agile

    NASA Technical Reports Server (NTRS)

    Trimble, Jay Phillip

    2013-01-01

    This is based on a previous talk on agile development. Methods for delivering software on a short cycle are described, including interactions with the customer, the affect on the team, and how to be more effective, streamlined and efficient.

  6. A Review of Combat Support Training.

    ERIC Educational Resources Information Center

    Montague, Ernest K.; Showel, Morris

    This report presents a review of current training practices and problems as they relate to the broad spread of individual ability among soldiers, and to the increasing need for functionalization of training. Combat support training was observed at four army training centers, with particular reference to training objectives, methods, and student…

  7. Tradeoff Analysis for Combat Service Support Wireless Communications Alternatives

    SciTech Connect

    Burnette, John R.; Thibodeau, Christopher C.; Greitzer, Frank L.

    2002-02-28

    As the Army moves toward more mobile and agile forces and continued sustainment of numerous high-cost legacy logistics management systems, the requirement for wireless connectivity and a wireless network to supporting organizations has become ever more critical. There are currently several Army communications initiatives underway to resolve this wireless connectivity issue. However, to fully appreciate and understand the value of these initiatives, a Tradeoff Analysis is needed. The present study seeks to identify and assess solutions. The analysis identified issues that impede Interim Brigade Combat Team (IBCT) communication system integration and outlined core requirements for sharing of logistics data between the field and Army battle command systems. Then, the analysis examined wireless communication alternatives as possible solutions for IBCT logistics communications problems. The current baseline system was compared with possible alternatives involving tactical radio systems, wireless/near term digital radio, cellular satellite, and third-generation (3G) wireless technologies. Cellular satellite and 3G wireless technologies offer clear advantages and should be considered for later IBCTs.

  8. High resolution combat simulations to support training for close combat light applications

    SciTech Connect

    Toms, R.M.; Dobbs, L.A.; Pimper, J.E.

    1990-06-14

    Superior tactical planning and maneuver synchronization are essential to fight and win on the CCL battlefield. This superiority can be achieved by the use of a combination of field exercises and high-resolution, computerized, combat simulation systems designed to support training. Computerized simulation systems provide a cost effective capability to promote learning through repetition and permit the exploration of scenarios that are impractical or dangerous to apply to live exercises. Man-in-the-loop, real-time, and force-on-force simulation systems with interactive color graphics interfaces are now available to support CCL training. Combat simulations have been developed specifically for this environment within the Conflict Simulation Laboratory (CSL) at the Lawrence Livermore National Laboratory (LLNL). Research and development efforts are underway that will greatly improve these capabilities. Applications are envisioned in training support, mission planning, analysis of new tactics and weapons, real-time display, and real-time operational support. 32 refs.

  9. Computed tomography of craniofacial trauma at a combat support hospital in Afghanistan.

    PubMed

    Statler, John D; Tempel, Carl G; Harcke, H Theodore

    2005-03-01

    Complex craniofacial injuries are encountered among both soldiers and civilians in combat zones. Computed tomography is a necessary and effective tool for the evaluation and treatment of these injuries in the forward-deployed combat support hospital. PMID:15828695

  10. Autonomous, agile micro-satellites and supporting technologies

    SciTech Connect

    Breitfeller, E; Dittman, M D; Gaughan, R J; Jones, M S; Kordas, J F; Ledebuhr, A G; Ng, L C; Whitehead, J C; Wilson, B

    1999-07-19

    This paper updates the on-going effort at Lawrence Livermore National Laboratory to develop autonomous, agile micro-satellites (MicroSats). The objective of this development effort is to develop MicroSats weighing only a few tens of kilograms, that are able to autonomously perform precision maneuvers and can be used telerobotically in a variety of mission modes. The required capabilities include satellite rendezvous, inspection, proximity-operations, docking, and servicing. The MicroSat carries an integrated proximity-operations sensor-suite incorporating advanced avionics. A new self-pressurizing propulsion system utilizing a miniaturized pump and non-toxic mono-propellant hydrogen peroxide was successfully tested. This system can provide a nominal 25 kg MicroSat with 200-300 m/s delta-v including a warm-gas attitude control system. The avionics is based on the latest PowerPC processor using a CompactPCI bus architecture, which is modular, high-performance and processor-independent. This leverages commercial-off-the-shelf (COTS) technologies and minimizes the effects of future changes in processors. The MicroSat software development environment uses the Vx-Works real-time operating system (RTOS) that provides a rapid development environment for integration of new software modules, allowing early integration and test. We will summarize results of recent integrated ground flight testing of our latest non-toxic pumped propulsion MicroSat testbed vehicle operated on our unique dynamic air-rail.

  11. Promising Practices in Professional Growth & Support: "Case Study of Agile Mind"

    ERIC Educational Resources Information Center

    Education Resource Strategies, 2013

    2013-01-01

    Four organizations with promising practices in teacher Professional Growth & Support have significantly raised outcomes for low-income students. The charter management networks, Achievement First and Aspire Public Schools, and the two reform organizations, Teach Plus and Agile Mind, have successfully increased student achievement with a…

  12. A Highly Agile Ground Assessment Robot (HAGAR) for military battlefield and support missions

    SciTech Connect

    Klarer, P.

    1994-04-01

    A mobile robotic vehicle with potential for use in military field applications is described. Based on a Sandia design intended for use in exploration of the Lunar surface, the Highly Agile Ground Assessment Robot (HAGAR) is a four wheeled all-wheel-drive dual-body vehicle. A uniquely simple method of chassis articulation is employed which allows all four wheels to remain in contact with the ground, even while operating in very rough terrain and climbing over obstacles as large as a wheel diameter. Skid steering and modular construction are used to produce a simple, rugged, lightweight, highly agile mobility chassis with a reduction in the number of parts required when compared to conventional vehicle designs for military battlefield and support missions. The design configuration, mobility parameters, potential mission configurations, and performance of existing and proposed HAGAR prototypes are discussed.

  13. Support of marines and sailors returning from combat: a comparison of two different mental health models.

    PubMed

    Johnston, Scott L; Dipp, Randolf D

    2009-05-01

    As Navy medicine continues to support the Global War on Terrorism, various approaches are used to attenuate combat stress casualties. This article examines two different mental health models, one employed at sea and one in the combat zone, used for active duty forces immediately after cessation of combat operations. Both models focus on screening, early prevention, and treatment implemented during the transition from the combat theater to garrison. Returning by sea provided the opportunity for greater education and decompression of combat stress as the service members transitioned back to garrison when compared to those who returned by air. It was also found that the Post Deployment Health Assessment (PDHA) did not capture as many individuals with mental health issues leaving combat theater, which identified 6% on both missions, compared to the capture rate with the Post Deployment Psychological Screener (PDPS), which identified 16-20%. Limitations, opportunities, and recommendations for future interventions are discussed. PMID:20731274

  14. An agile acquisition decision-support workbench for evaluating ISR effectiveness

    NASA Astrophysics Data System (ADS)

    Stouch, Daniel W.; Champagne, Valerie; Mow, Christopher; Rosenberg, Brad; Serrin, Joshua

    2011-06-01

    The U.S. Air Force is consistently evolving to support current and future operations through the planning and execution of intelligence, surveillance and reconnaissance (ISR) missions. However, it is a challenge to maintain a precise awareness of current and emerging ISR capabilities to properly prepare for future conflicts. We present a decisionsupport tool for acquisition managers to empirically compare ISR capabilities and approaches to employing them, thereby enabling the DoD to acquire ISR platforms and sensors that provide the greatest return on investment. We have developed an analysis environment to perform modeling and simulation-based experiments to objectively compare alternatives. First, the analyst specifies an operational scenario for an area of operations by providing terrain and threat information; a set of nominated collections; sensor and platform capabilities; and processing, exploitation, and dissemination (PED) capacities. Next, the analyst selects and configures ISR collection strategies to generate collection plans. The analyst then defines customizable measures of effectiveness or performance to compute during the experiment. Finally, the analyst empirically compares the efficacy of each solution and generates concise reports to document their conclusions, providing traceable evidence for acquisition decisions. Our capability demonstrates the utility of using a workbench environment for analysts to design and run experiments. Crafting impartial metrics enables the acquisition manager to focus on evaluating solutions based on specific military needs. Finally, the metric and collection plan visualizations provide an intuitive understanding of the suitability of particular solutions. This facilitates a more agile acquisition strategy that handles rapidly changing technology in response to current military needs.

  15. Gender Differences Among Military Combatants: Does Social Support, Ostracism, and Pain Perception Influence Psychological Health?

    PubMed

    McGraw, Kate

    2016-01-01

    The literature on gender differences related to psychological health among in-theater service members who are deployed in a combatant role is limited. Much focuses on retrospective reports of service members who have returned from deployment. Potential key factors that contribute to gender differences in psychological health among combatants are found in literature across several topic areas, but integration of findings across disciplines is lacking. A growing body of literature on gender differences related to psychological health of postdeployment military populations suggests males and females respond differently to perceived levels of social support pre-and postdeployment. One study on service members who were deployed suggested no significant gender differences related to reported psychological health symptoms, but did appear to find significant gender differences related to reported perception of unit morale. In another related area, research explores how ostracism impacts physical and psychological health of individuals and organizations, and can result in perceptions of physical pain, although research on gender differences related to the impact of ostracism is scarce. Research has also begun to focus on sex differences in pain responses, and has identified multiple biopsychosocial, genetic, and hormonal factors that may contribute as potential underlying mechanisms. In this brief review, we focus on and begin to integrate relevant findings related to the psychological health of females in combat roles, gender differences in the impact of perception of social support on psychological health, the psychological and physical impact of ostracism on individuals and organizations, and the current literature on sex differences in pain perception. We conclude with a synthesis and discussion of research gaps identified through this review, implications for clinical practice, and potential future research directions. In conclusion, there appear to be gender

  16. Elements of an Art - Agile Coaching

    NASA Astrophysics Data System (ADS)

    Lundh, Erik

    This tutorial gives you a lead on becoming or redefining yourself as an Agile Coach. Introduction to elements and dimensions of state-of-the-art Agile Coaching. How to position the agile coach to be effective in a larger setting. Making the agile transition - from a single team to thousands of people. How to support multiple teams as a coach. How to build a coaches network in your company. Challenges when the agile coach is a consultant and the organization is large.

  17. Wartime paediatric extremity injuries: experience from the Kabul International Airport Combat support hospital.

    PubMed

    Mathieu, Laurent; Bertani, Antoine; Rongiéras, Frédéric; Chaudier, Philippe; Mary, Pierre; Versier, Gilbert

    2015-05-01

    Since the beginning of Operation Enduring Freedom, management of Afghan military or civilian casualties including children is a priority of the battlefield medical support. The aim of this study is to describe the features of paediatric wartime extremities injuries and to analyse their management in the Kabul International Airport Combat Support Hospital. A retrospective review was carried out using the French surgical database OPEX (Service de Santé des Armées) from June 2009 to January 2013. Paediatric patients were defined as those younger than 16 years old. Of the 220 injured children operated on, 155 (70%) sustained an extremity injury and were included. The mean age of the children was 9.1 ± 3.8 years. Among these children, 77 sustained combat-related injuries (CRIs) and 78 sustained noncombat-related injuries (NCRIs), with a total of 212 extremities injuries analysed. All CRIs were open injuries, whereas NCRIs were dominated by blunt injuries. Multiple extremities injuries and associated injuries were significantly more frequent in children with CRIs, whose median Injury Severity Score was higher than those with NCRIs. Debridement and irrigation was significantly predominant in the CRIs group, as well as internal fracture fixation in the NCRIs group. There were four deaths, yielding a global mortality rate of 2.6%. This study is the first to analyse specifically paediatric extremities trauma and their management at level 3 of battlefield medical facilities in recent conflicts. Except for severe burns and polytrauma, treatment of paediatric extremities injuries can be readily performed in Combat Support Hospitals by orthopaedic surgeons trained in paediatric trauma. PMID:25811919

  18. What Does an Agile Coach Do?

    NASA Astrophysics Data System (ADS)

    Davies, Rachel; Pullicino, James

    The surge in Agile adoption has created a demand for project managers rather than direct their teams. A sign of this trend is the ever-increasing number of people getting certified as scrum masters and agile leaders. Training courses that introduce agile practices are easy to find. But making the transition to coach is not as simple as understanding what agile practices are. Your challenge as an Agile Coach is to support your team in learning how to wield their new Agile tools in creating great software.

  19. Development of a lightweight portable ventilator for far-forward battlefield combat casualty support

    NASA Astrophysics Data System (ADS)

    Cutchis, Protagoras N.; Smith, Dexter G.; Ko, Harvey W.; Wiesmann, William P.; Pranger, L. Alex

    1999-07-01

    Immediate medical provision substantially reduces the number of fatalities sustained during military operations. However, the shift from large-scale regional conflicts to smaller peacekeeping and humanitarian missions has reduced the military medical support infrastructure. Civilian emergency medical services have long emphasized the 'golden hour' during which a patient must receive definitive medical attention. Without on-scene medical support, injured soldiers must be transported significant distances before receiving advanced medical care, and rapid transport to a medical facility is not always a viable option. Technological solutions enable military medics to deliver advanced medical care on the battlefield. We report here on the development of a small lightweight portable respirator for the treatment of far- forward battlefield casualties. The Far Forward Life Support System (FFLSS) utilizes a combination of COTS (commercial off the shelf) components and custom designed systems to provide ventilatory support to injured combatants. It also incorporates a small IV fluid pump and IV fluids for resuscitation. A microcompressor control system monitors both system performance and patient parameters for system control. Telemetry to a pager-like device worn by the front line medic alerts of any anomalies in ventilator or patient parameters, which will add greatly to triage decisions and resource management. Novel elements of the FLSS design include oxygen generation, low-pressure air generation, available patient suction, and the absence of any high pressure air cylinders. A prototype developed for animal testing will be described in detail as well as further design requirements for the human rated prototype.

  20. Lessons Learned: Employment and Tactical Use of The Combat Medic During Stability Support Operations.

    PubMed

    Eldred, Michael S

    2016-01-01

    It is the intent of this article to define the strategy by which Combat Medics have been employed in contemporary stability operations and counterinsurgency conflicts. This article describes the advances in training based on Tactical Combat Casualty Care and how training evolved into an evidence-based model. Training platforms evolved with shifts in mission requirements, new technology, improved medical techniques, and changing protocols. The last portion of this article details recommendations in doctrine, materiel, and training that could enable optimal sustainment standards while retaining operational capability across a wide variety of combat and peace operations. Lessons learned and changes adapted for Medics that are addressed: (1) advances in training and employment of the Combat Medic necessitated by tactics and strategy of current conflicts, (2) Combat Medic regulatory requirements and centralized, just-in-time training, and (3) changes in sustainment training driven by certification requirements and use of medical simulation training centers. PMID:27215893

  1. Piloted simulator assessments of agility

    NASA Technical Reports Server (NTRS)

    Schneider, Edward T.

    1990-01-01

    NASA has utilized piloted simulators for nearly two decades to study high-angle-of-attack flying qualities, agility, and air-to-air combat. These studies have included assessments of an F-16XL aircraft equipped with thrust vectoring, an assessment of the F-18 HARV maneuvering requirements to assist in thrust vectoring control system design, and an agility assessment of the F-18. The F-18 agility assessment was compared with in-flight testing. Open-loop maneuvers such as 180-deg rolls to measure roll rate showed favorable simulator/in-flight comparison. Closed-loop maneuvers such as rolls to 90 deg with precision stops or certain maximum longitudinal pitching maneuvers showed poorer performance due to reduced aggressiveness of pilot inputs in flight to remain within flight envelope limits.

  2. Towards an Agile Approach to Adapting Dynamic Collaboration Support to Student Needs

    ERIC Educational Resources Information Center

    Adamson, David; Dyke, Gregory; Jang, Hyeju; Rosé, Carolyn Penstein

    2014-01-01

    This paper investigates the use of conversational agents to scaffold on-line collaborative learning discussions through an approach called Academically Productive Talk (APT). In contrast to past work on dynamic support for collaborative learning, where agents were used to elevate conceptual depth by leading students through directed lines of…

  3. Supporting Young Children in Combat-Injured Families: Call to Action

    ERIC Educational Resources Information Center

    Arata-Maiers, Teresa L.; Stafford, Elisabeth M.

    2010-01-01

    Military families are currently facing the longest period of combat in the history of the nation, along with the attendant challenges of prolonged or repeated deployment. With the return of 36,000-plus service members wounded in action, including nearly 11,000 requiring medical evacuation and those with additional "invisible injuries," there are…

  4. Religiosity as a Moderator of Self-Efficacy and Social Support in Predicting Traumatic Stress Among Combat Soldiers.

    PubMed

    Israel-Cohen, Yael; Kaplan, Oren; Noy, Smadar; Kashy-Rosenbaum, Gabriela

    2016-08-01

    Based on a sample of 54 Israeli soldiers (51 % non-religious, 49 % religious) surveyed upon their return from combat, this study investigates the moderating role of religiosity as a factor that may strengthen cognitive processing tied to the belief in oneself to persevere (i.e., self-efficacy) after trauma and/or as a factor tied to enhanced external social support that religious individuals in particular may benefit from by their involvement in a religious community. Findings revealed (1) social support was tied to greater resilience within the general sample; (2) religious soldiers were less susceptible to traumatic stress than non-religious soldiers; and (3) religiosity moderated the relationship between self-efficacy and traumatic stress but not the relationship between social support and traumatic stress. Implications of findings are discussed. PMID:26815579

  5. AGILE Data Center and AGILE science highlights

    NASA Astrophysics Data System (ADS)

    Pittori, C.

    2013-06-01

    AGILE is a scientific mission of the Italian Space Agency (ASI) with INFN, INAF e CIFS participation, devoted to gamma-ray astrophysics. The satellite is in orbit since April 23rd, 2007. Gamma-ray astrophysics above 100 MeV is an exciting field of astronomical sciences that has received a strong impulse in recent years. Despite the small size and budget, AGILE produced several important scientific results, among which the unexpected discovery of strong and rapid gamma-ray flares from the Crab Nebula. This discovery won to the AGILE PI and the AGILE Team the prestigious Bruno Rossi Prize for 2012, an international recognition in the field of high energy astrophysics. We present here the AGILE data center main activities, and we give an overview of the AGILE scientific highlights after 5 years of operations.

  6. Development of an agility assessment module for preliminary fighter design

    NASA Technical Reports Server (NTRS)

    Ngan, Angelen; Bauer, Brent; Biezad, Daniel; Hahn, Andrew

    1996-01-01

    A FORTRAN computer program is presented to perform agility analysis on fighter aircraft configurations. This code is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. FORTRAN programs were developed for two specific metrics, CCT (Combat Cycle Time) and PM (Pointing Margin), as part of the agility module. The validity of the code was evaluated by comparing with existing flight test data. Example trade studies using the agility module along with ACSYNT were conducted using Northrop F-20 Tigershark and McDonnell Douglas F/A-18 Hornet aircraft models. The sensitivity of thrust loading and wing loading on agility criteria were investigated. The module can compare the agility potential between different configurations and has the capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements.

  7. Social Protocols for Agile Virtual Teams

    NASA Astrophysics Data System (ADS)

    Picard, Willy

    Despite many works on collaborative networked organizations (CNOs), CSCW, groupware, workflow systems and social networks, computer support for virtual teams is still insufficient, especially support for agility, i.e. the capability of virtual team members to rapidly and cost efficiently adapt the way they interact to changes. In this paper, requirements for computer support for agile virtual teams are presented. Next, an extension of the concept of social protocol is proposed as a novel model supporting agile interactions within virtual teams. The extended concept of social protocol consists of an extended social network and a workflow model.

  8. Cross (Unit)-Level Effects of Cohesion on Relationships of Suicide Thoughts to Combat Exposure, Postdeployment Stressors, and Postdeployment Social Support.

    PubMed

    Griffith, James

    2015-01-01

    A behavioral health concern for the US military has been suicide, largely due to its increased prevalence in the last several years during US involvement in the Iraq and Afghanistan wars. Using hierarchical linear modeling (HLM), the present study examined relationships among combat exposure, postdeployment stressors, social support, and unit cohesion. Survey data were obtained from 4,567 soldiers who were members of 50 company-sized units. At the individual level, combat exposure and postdeployment stressors were associated with suicidal thoughts. Postdeployment social support was associated with fewer suicidal thoughts. There was no evidence of the stress-buffering effect of social support. At the group level, reduced risk for suicidal thoughts was associated with units having higher than average cohesion. Reduced risk for suicidal thoughts in conjunction with combat experiences was observed in units having higher than average cohesion, though not reaching a traditional level of statistical significance. PMID:26332927

  9. Combating illiteracy

    NASA Astrophysics Data System (ADS)

    A science course for nonscientists at Columbia University's Columbia College that was created in 1981 as an experiment to combat “the national crisis of scientific illiteracy” has received major new foundation support and has achieved a permanent place in the college's curriculum.The course, The Theory and Practice of Science, has received a $240,000 grant from the Andrew W. Mellon Foundation, according to Robert E. Pollack, college dean, professor of biological sciences, and originator of the course. The grant will be used for the preparation and publication in 1985 of a textbook, titled The Scientific Experience, which will permit the course to be taught at other schools around the country.

  10. Combat games

    NASA Technical Reports Server (NTRS)

    Ardema, M. D.; Heymann, M.; Rajan, N.

    1985-01-01

    A mathematical formulation is proposed of a combat game between two opponents with offensive capabilities and offensive objective is proposed. Resolution of the combat involves solving two differential games with state constraints. Depending on the game dynamics and parameters, the combat can terminate in one of four ways: the first player wins; the second player wins; a draw (neither wins); or joint capture. In the first two cases, the optimal strategies of the two players are determined from suitable zero-sum games, whereas in the latter two the relevant games are nonzero-sum. Further, to avoid certain technical difficulties, the concept of a delta-combat game is introduced.

  11. Fighter agility metrics. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.

    1990-01-01

    Fighter flying qualities and combat capabilities are currently measured and compared in terms relating to vehicle energy, angular rates and sustained acceleration. Criteria based on these measurable quantities have evolved over the past several decades and are routinely used to design aircraft structures, aerodynamics, propulsion and control systems. While these criteria, or metrics, have the advantage of being well understood, easily verified and repeatable during test, they tend to measure the steady state capability of the aircraft and not its ability to transition quickly from one state to another. Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A complete set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available.

  12. An investigation of fighter aircraft agility

    NASA Technical Reports Server (NTRS)

    Valasek, John; Downing, David R.

    1993-01-01

    This report attempts to unify in a single document the results of a series of studies on fighter aircraft agility funded by the NASA Ames Research Center, Dryden Flight Research Facility and conducted at the University of Kansas Flight Research Laboratory during the period January 1989 through December 1993. New metrics proposed by pilots and the research community to assess fighter aircraft agility are collected and analyzed. The report develops a framework for understanding the context into which the various proposed fighter agility metrics fit in terms of application and testing. Since new metrics continue to be proposed, this report does not claim to contain every proposed fighter agility metric. Flight test procedures, test constraints, and related criteria are developed. Instrumentation required to quantify agility via flight test is considered, as is the sensitivity of the candidate metrics to deviations from nominal pilot command inputs, which is studied in detail. Instead of supplying specific, detailed conclusions about the relevance or utility of one candidate metric versus another, the authors have attempted to provide sufficient data and analyses for readers to formulate their own conclusions. Readers are therefore ultimately responsible for judging exactly which metrics are 'best' for their particular needs. Additionally, it is not the intent of the authors to suggest combat tactics or other actual operational uses of the results and data in this report. This has been left up to the user community. Twenty of the candidate agility metrics were selected for evaluation with high fidelity, nonlinear, non real-time flight simulation computer programs of the F-5A Freedom Fighter, F-16A Fighting Falcon, F-18A Hornet, and X-29A. The information and data presented on the 20 candidate metrics which were evaluated will assist interested readers in conducting their own extensive investigations. The report provides a definition and analysis of each metric; details

  13. Perceived organizational support, posttraumatic stress disorder symptoms, and stigma in soldiers returning from combat.

    PubMed

    Kelley, Christie L; Britt, Thomas W; Adler, Amy B; Bliese, Paul D

    2014-05-01

    Research has shown that perceived organizational support (POS), or how much employees believe their organizations value their contributions and well-being, is an important predictor of employee mental health outcomes. To support employee mental health in high-risk occupations, organizations may want to identify variables that explain the relationship between POS and posttraumatic stress disorder (PTSD). Using a longitudinal design and a military sample, the present study found a relationship between POS and stigma as well as PTSD symptoms. Stigma partially mediated the relationship between POS at Time 1 and PTSD symptoms at Time 2. The partial mediation indicates that a supportive environment may also create a climate of reduced stigma in which soldiers may be comfortable addressing PTSD symptoms. Both results suggest positive actions that organizations can take to support employee mental health. PMID:24364593

  14. Health professionals' opinions on supporting a cancer biobank: identification of barriers to combat biobanking pitfalls.

    PubMed

    Caixeiro, Nicole J; Byun, Hei Lan; Descallar, Joseph; Levesque, Janelle V; de Souza, Paul; Soon Lee, Cheok

    2016-05-01

    Although rarely acknowledged, a successful biobank is highly dependent on the support of the health professionals who assist the biobank in all aspects of its activities. In many cases, the lack of health professional support can be a limiting factor in the biobanking process of collecting and processing high-quality biospecimens. The aim of this study was to determine the attitudes of health professionals towards cancer biobanking. Using a 5-point Likert scale questionnaire, important aspects of biobanking, including accrual, quality, knowledge, responsiveness, impact, access, trust, governance and accreditation, were investigated. In total, 95 of 124 health and medical practitioners who were approached participated in this study (77% response rate). Health professionals in general supported the aims of biobanking with 56% of participants showing willingness to create a biobank and recruit donors (accrual), 85% understanding the importance in the storage and distribution of biospecimens (quality), 88% having an appreciation for the role of a biobank in furthering cancer research (knowledge), 70% showing awareness of the use of biospecimens in future research initiatives (responsiveness) and 73% demonstrating support for a biobank with proper control, authority and credibility measures in place (governance and accreditation). Overall, provided that proper information about the activities of the biobank and researcher access was transparent, health professionals were very willing to support cancer biobanking. These findings may assist in developing strategies for the establishment and maintenance of biobanks and aid the implementation of more effective policies and procedures to embed biobanking into routine hospital practices. PMID:26328505

  15. Interactive, mobile, AGIle and novel education (IMAGINE): a conceptual framework to support students with mobility challenges in higher education.

    PubMed

    Goldberg, Mary; Karimi, Hassan; Pearlman, Jonathan L

    2016-01-01

    Interactive, mobile, AGIle and novel education (IMAGINE) is a conceptual framework to help students with disabilities (SwD) participate more in the physical space and become more engaged in school. IMAGINE recommends and reminds students, and allows them to make requests of key learning resources (LRs). The goal of IMAGINE is to provide SwD with the location and time for attending a LR that is most optimal with respect to their learning style and preference, learning performance and other activities. IMAGINE will be a means through which SWD will be provided with tailored recommendations with respect to their daily activities to improve learning outcomes. A pilot was conducted with SwD who used IMAGINE's navigation and wayfinding functionality, and the subjects reported that it aligns well with their needs. Preliminary results suggest that after completing a training and using the tool, SwD reported that they are more likely to use the tool and their participation may increase as a result. In contrast to before the trial, the SwD were also able to better describe the tool's benefits and how to improve its functionality after using the tool for four weeks. Implications for Rehabilitation The IMAGINE tool may be a means through which SwD can be provided with tailored recommendations with respect to their daily activities to improve learning outcomes. PWD should be involved (as research study participants and research study team members) in the design and development of tools like IMAGINE to improve participation. IMAGINE and similar tools may not only encourage better learning outcomes, but also more physical participation in the community, and could be used across education and employment settings. PMID:25212492

  16. Combating Weight-Based Bullying in Schools: Is There Public Support for the Use of Litigation?

    ERIC Educational Resources Information Center

    Puhl, Rebecca; Luedicke, Joerg; King, Kelly M.

    2015-01-01

    Background: Bullying litigation is an emerging area of law that has increased in response to serious cases of bullying at school. Weight-based bullying is prevalent at school, but no research has examined the use of litigation to address this problem. We assessed public support for litigation approaches to address weight-based bullying at school,…

  17. Developing communications requirements for Agile Product Realization

    SciTech Connect

    Forsythe, C.; Ashby, M.R.

    1994-03-01

    Sandia National Laboratories has undertaken the Agile Product Realization for Innovative electroMEchanical Devices (A-PRIMED) pilot project to develop and implement technologies for agile design and manufacturing of electrochemical components. Emphasis on information-driven processes, concurrent engineering and multi-functional team communications makes computer-supported cooperative work critical to achieving significantly faster product development cycles. This report describes analyses conducted in developing communications requirements and a communications plan that addresses the unique communications demands of an agile enterprise.

  18. Wired Widgets: Agile Visualization for Space Situational Awareness

    NASA Astrophysics Data System (ADS)

    Gerschefske, K.; Witmer, J.

    2012-09-01

    Continued advancement in sensors and analysis techniques have resulted in a wealth of Space Situational Awareness (SSA) data, made available via tools and Service Oriented Architectures (SOA) such as those in the Joint Space Operations Center Mission Systems (JMS) environment. Current visualization software cannot quickly adapt to rapidly changing missions and data, preventing operators and analysts from performing their jobs effectively. The value of this wealth of SSA data is not fully realized, as the operators' existing software is not built with the flexibility to consume new or changing sources of data or to rapidly customize their visualization as the mission evolves. While tools like the JMS user-defined operational picture (UDOP) have begun to fill this gap, this paper presents a further evolution, leveraging Web 2.0 technologies for maximum agility. We demonstrate a flexible Web widget framework with inter-widget data sharing, publish-subscribe eventing, and an API providing the basis for consumption of new data sources and adaptable visualization. Wired Widgets offers cross-portal widgets along with a widget communication framework and development toolkit for rapid new widget development, giving operators the ability to answer relevant questions as the mission evolves. Wired Widgets has been applied in a number of dynamic mission domains including disaster response, combat operations, and noncombatant evacuation scenarios. The variety of applications demonstrate that Wired Widgets provides a flexible, data driven solution for visualization in changing environments. In this paper, we show how, deployed in the Ozone Widget Framework portal environment, Wired Widgets can provide an agile, web-based visualization to support the SSA mission. Furthermore, we discuss how the tenets of agile visualization can generally be applied to the SSA problem space to provide operators flexibility, potentially informing future acquisition and system development.

  19. A Prospective Study of Depression Following Combat Deployment in Support of the Wars in Iraq and Afghanistan

    PubMed Central

    LeardMann, Cynthia A.; Fortuna, Sarah O.; Smith, Besa; Smith, Tyler C.; Ryan, Margaret A. K.; Boyko, Edward J.; Blazer, Dan

    2010-01-01

    Objective. We investigated relations between deployment and new-onset depression among US service members recently deployed to the wars in Iraq and Afghanistan. Methods. We included 40 219 Millennium Cohort Study participants who completed baseline and follow-up questionnaires and met inclusion criteria. Participants were identified with depression if they met the Primary Care Evaluation of Mental Disorders Patient Health Questionnaire criteria for depression at follow-up, but not at baseline. Results. Deployed men and women with combat exposures had the highest onset of depression, followed by those not deployed and those deployed without combat exposures. Combat-deployed men and women were at increased risk for new-onset depression compared with nondeployed men and women (men: adjusted odds ratio [AOR] = 1.32; 95% confidence interval [CI] = 1.13, 1.54; women: AOR = 2.13; 95% CI = 1.70, 2.65). Conversely, deployment without combat exposures led to decreased risk for new-onset depression compared with those who did not deploy (men: AOR = 0.66; 95% CI = 0.53, 0.83; women: AOR = 0.65; 95% CI = 0.47, 0.89). Conclusions. Deployment with combat exposures is a risk factor for new-onset depression among US service members. Post-deployment screening may be beneficial for US service members exposed to combat. PMID:19910353

  20. Positive resources for combating depressive symptoms among Chinese male correctional officers: perceived organizational support and psychological capital

    PubMed Central

    2013-01-01

    Background Although correctional officers (COs) clearly suffer from depression, positive resources for combating depression have been rarely studied in this population. The purpose of the study was to examine the associations of perceived organizational support (POS) and psychological capital (PsyCap) with depressive symptoms among Chinese COs. Methods A cross-sectional survey was conducted in a province of northeast China during March–April 2011. A self-administered questionnaire was distributed to 1900 male COs from four male prisons. Depressive symptoms, POS, and PsyCap (self efficacy, hope, resilience, and optimism) were measured anonymously. A total of 1428 effective respondents with 953 frontline COs (FL-COs) and 475 non-frontline COs (NFL-COs) became our final sample. Hierarchical linear regression was performed to explore the factors associated with depressive symptoms. Asymptotic and resampling strategies were used to examine the mediating roles of PsyCap and its four components. Results The level of depressive symptoms of FL-COs was significantly higher than that of NFL-COs (t = 2.28, p = 0.023). There were significant negative associations of POS, PsyCap, hope, resilience, and optimism with depressive symptoms among FL-COs. In NFL-COs, POS, PsyCap, and optimism were negatively associated with depressive symptoms. POS was positively associated with PsyCap and its four components among both FL-COs and NFL-COs. For FL-COs, PsyCap (a*b = −0.143, BCa 95% CI: –0.186, –0.103, p < 0.05), resilience (a*b = −0.052, BCa 95% CI: –0.090, –0.017, p < 0.05), and optimism (a*b = −0.053, BCa 95% CI: –0.090, –0.016, p < 0.05) significantly mediated the association between POS and depressive symptoms. For NFL-COs, PsyCap (a*b = −0.126, BCa 95% CI: –0.186, –0.065, p < 0.05) and optimism (a*b = −0.066, BCa 95% CI: –0.116, –0.008, p < 0.05) significantly mediated the association. Conclusions

  1. Agile Software Development

    ERIC Educational Resources Information Center

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  2. Monitoring and Assessment Science to Support Decision-Making by the United Nations Convention to Combat Desertification (UNCCD)

    NASA Astrophysics Data System (ADS)

    Winslow, M.; Akhtar-Schuster, M.; Cherlet, M.; Martius, C.; Sommer, S.; Thomas, R.; Vogt, J.

    2009-12-01

    The United Nations Convention to Combat Desertification (UNCCD) is a global treaty that emerged from the Rio Earth Summit and formally took force in 1996. It has now been ratified by 193 countries (known as Parties to the Convention). Yet the UNCCD has gained only modest support from donors, largely due to questions about the science base underlying its target issue (desertification) resulting in ambiguous definitions and quantification of the problem. The UNCCD recognizes the need to reform itself and commissioned a scientific conference in Buenos Aires, Argentina in September 2009 to discuss ways to improve the scientific underpinning of monitoring and assessment (M&A) of desertification, land degradation and drought (DLDD). Previous attempts by the UNCCD on M&A focused largely on a search for a common, simple, universal set of indicators that could be reported by country Parties to the Convention Secretariat, which would collate them into a global report. However experience found that no single set of indicators is satisfactory to all countries, because DLDD depends strongly on the local environmental and human/social context. Three preparatory Working Groups analyzed the issue of DLDD M&A and recommended the following. Parties should recognize that M&A methods must integrate human-environment parameters to capture the complexity of DLDD phenomena as defined in the Convention’s text. Traditional tendencies had been to isolate biophysical from social and economic parameters, leading to unrealistic conclusions. Parties should take advantage of a much wider range of analytical techniques than just the coarse-scale indicators that had been their main focus to date. Powerful but underutilized techniques include integrated assessment models, remote sensing, geographic information systems and mapping, participatory stakeholder assessment, hierarchical aggregation of related data, knowledge management and many others. Multiple methods could provide validation checks

  3. SuperAGILE Services at ASDC

    SciTech Connect

    Preger, B.; Verrecchia, F.; Pittori, C.; Antonelli, L. A.; Giommi, P.; Lazzarotto, F.; Evangelista, Y.

    2008-05-22

    The Italian Space Agency Science Data Center (ASDC) is a facility with several responsibilities including support to all the ASI scientific missions as for management and archival of the data, acting as the interface between ASI and the scientific community and providing on-line access to the data hosted. In this poster we describe the services that ASDC provides for SuperAGILE, in particular the ASDC public web pages devoted to the dissemination of SuperAGILE scientific results. SuperAGILE is the X-Ray imager onboard the AGILE mission, and provides the scientific community with orbit-by-orbit information on the observed sources. Crucial source information including position and flux in chosen energy bands will be reported in the SuperAGILE public web page at ASDC. Given their particular interest, another web page will be dedicated entirely to GRBs and other transients, where new event alerts will be notified and where users will find all the available informations on the GRBs detected by SuperAGILE.

  4. A study of a proposed modified torsional agility metric

    NASA Technical Reports Server (NTRS)

    Valasek, John; Eggold, David P.; Downing, David R.

    1991-01-01

    A new candidate lateral agility metric, the modified torsional agility parameter, is proposed and tested through generic, nonlinear, non-real-time flight simulation programs of the F-18 and F-5A. The metric is aimed at quantifying high subsonic loaded roll capabilities which might be useful in modern air combat. The metric is considered to be straightforward for testing and measuring based on nonreal-time unmanned flight simulation. The metric is found to be sensitive to pilot input errors of less than full lateral stick to capture bank angle, when tested using unmanned flight simulations. It is suggested that, for redesigned configurations of both aircraft with improved lateral agility, the major benefit would be provided by fast and highly effective rudders, and a high level of pitch, roll, and yaw damping at moderate to high normal load factor levels.

  5. An agile implementation of SCRUM

    NASA Astrophysics Data System (ADS)

    Gannon, Michele

    Is Agile a way to cut corners? To some, the use of an Agile Software Development Methodology has a negative connotation - “ Oh, you're just not producing any documentation” . So can a team with no experience in Agile successfully implement and use SCRUM?

  6. A Case Study of Coordination in Distributed Agile Software Development

    NASA Astrophysics Data System (ADS)

    Hole, Steinar; Moe, Nils Brede

    Global Software Development (GSD) has gained significant popularity as an emerging paradigm. Companies also show interest in applying agile approaches in distributed development to combine the advantages of both approaches. However, in their most radical forms, agile and GSD can be placed in each end of a plan-based/agile spectrum because of how work is coordinated. We describe how three GSD projects applying agile methods coordinate their work. We found that trust is needed to reduce the need of standardization and direct supervision when coordinating work in a GSD project, and that electronic chatting supports mutual adjustment. Further, co-location and modularization mitigates communication problems, enables agility in at least part of a GSD project, and renders the implementation of Scrum of Scrums possible.

  7. Modern Enterprise Systems as Enablers of Agile Development

    NASA Astrophysics Data System (ADS)

    Fredriksson, Odd; Ljung, Lennart

    Traditional ES technology and traditional project management methods are supporting and matching each other. But they are not supporting the critical success conditions for ES development in an effective way. Although the findings from one case study of a successful modern ES change project is not strong empirical evidence, we carefully propose that the new modern ES technology is supporting and matching agile project management methods. In other words, it provides the required flexibility which makes it possible to put into practice the agile way of running projects, both for the system supplier and for the customer. In addition, we propose that the combination of modern ES technology and agile project management methods are more appropriate for supporting the realization of critical success conditions for ES development. The main purpose of this chapter is to compare critical success conditions for modern enterprise systems development projects with critical success conditions for agile information systems development projects.

  8. Perspectives on Agile Coaching

    NASA Astrophysics Data System (ADS)

    Fraser, Steven; Lundh, Erik; Davies, Rachel; Eckstein, Jutta; Larsen, Diana; Vilkki, Kati

    There are many perspectives to agile coaching including: growing coaching expertise, selecting the appropriate coach for your context; and eva luating value. A coach is often an itinerant who may observe, mentor, negotiate, influence, lead, and/or architect everything from team organization to system architecture. With roots in diverse fields ranging from technology to sociology coaches have differing motivations and experience bases. This panel will bring together coaches to debate and discuss various perspectives on agile coaching. Some of the questions to be addressed will include: What are the skills required for effective coaching? What should be the expectations for teams or individu als being coached? Should coaches be: a corporate resource (internal team of consultants working with multiple internal teams); an integral part of a specific team; or external contractors? How should coaches exercise influence and au thority? How should management assess the value of a coaching engagement? Do you have what it takes to be a coach? - This panel will bring together sea soned agile coaches to offer their experience and advice on how to be the best you can be!

  9. Developments in Agile Manufacturing

    SciTech Connect

    Clinesmith, M.G.

    1993-09-01

    As part of a project design initiative, Sandia National Laboratories and AlliedSignal Inc. Kansas City Division have joined efforts to develop a concurrent engineering capability for the manufacturing of complex precision components. The primary effort of this project, called Agile Manufacturing, is directed toward: (1) Understand the error associated with manufacturing and inspection. (2) Develop methods for correcting error. (3) Integrate diverse software technologies into a compatible process. The Agile Manufacturing System (AMS) is a system that integrates product design, manufacturing, and inspection into a closed loop, concurrent engineering process. The goal of developing the Agile Manufacturing System is to: (1) Optimize accuracy in manufacturing and inspection. (A) Use of softgage software for product evaluation. This will ensure ANSI Y14.5 compliance. (B) Establish and monitor bias between CMM and machine center. (C) Map probe deflection error and apply correction to inspection results. This applies to both on machine probing and CMM inspections. (D) Inspection process. (2) Compress the cycle time from product concept to production level manufacturing and verification. (3) Create a self-correcting process that feeds inspection results back into the machining process. (4) Link subordinate processes (cutting/probing path, softgage model, etc.) to the solid model definition.

  10. Fit for the frontline? Identification of mission-critical auditory tasks (MCATs) carried out by infantry and combat-support personnel

    PubMed Central

    Semeraro, Hannah D.; Bevis, Zoë L.; Rowan, Daniel; van Besouw, Rachel M.; Allsopp, Adrian J.

    2015-01-01

    The ability to listen to commands in noisy environments and understand acoustic signals, while maintaining situational awareness, is an important skill for military personnel and can be critical for mission success. Seventeen auditory tasks carried out by British infantry and combat-support personnel were identified through a series of focus groups conducted by Bevis et al. For military personnel, these auditory tasks are termed mission-critical auditory tasks (MCATs) if they are carried in out in a military-specific environment and have a negative consequence when performed below a specified level. A questionnaire study was conducted to find out which of the auditory tasks identified by Bevis et al. satisfy the characteristics of an MCAT. Seventy-nine British infantry and combat-support personnel from four regiments across the South of England participated. For each auditory task participants indicated: 1) the consequences of poor performance on the task, 2) who performs the task, and 3) how frequently the task is carried out. The data were analysed to determine which tasks are carried out by which personnel, which have the most negative consequences when performed poorly, and which are performed the most frequently. This resulted in a list of 9 MCATs (7 speech communication tasks, 1 sound localization task, and 1 sound detection task) that should be prioritised for representation in a measure of auditory fitness for duty (AFFD) for these personnel. Incorporating MCATs in AFFD measures will help to ensure that personnel have the necessary auditory skills for safe and effective deployment on operational duties. PMID:25774613

  11. Utilization of an agility assessment module in analysis and optimization of preliminary fighter configuration

    NASA Technical Reports Server (NTRS)

    Ngan, Angelen; Biezad, Daniel

    1996-01-01

    A study has been conducted to develop and to analyze a FORTRAN computer code for performing agility analysis on fighter aircraft configurations. This program is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. The validity of the existing code was evaluated by comparing with existing flight test data. A FORTRAN program was developed for a specific metric, PM (Pointing Margin), as part of the agility module. Example trade studies using the agility module along with ACSYNT were conducted using a McDonnell Douglas F/A-18 Hornet aircraft model. Tile sensitivity of thrust loading, wing loading, and thrust vectoring on agility criteria were investigated. The module can compare the agility potential between different configurations and has capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements in the preliminary design.

  12. Agile Infrastructure Monitoring

    NASA Astrophysics Data System (ADS)

    Andrade, P.; Ascenso, J.; Fedorko, I.; Fiorini, B.; Paladin, M.; Pigueiras, L.; Santos, M.

    2014-06-01

    At the present time, data centres are facing a massive rise in virtualisation and cloud computing. The Agile Infrastructure (AI) project is working to deliver new solutions to ease the management of CERN data centres. Part of the solution consists in a new "shared monitoring architecture" which collects and manages monitoring data from all data centre resources. In this article, we present the building blocks of this new monitoring architecture, the different open source technologies selected for each architecture layer, and how we are building a community around this common effort.

  13. Agile Walking Robot

    NASA Technical Reports Server (NTRS)

    Larimer, Stanley J.; Lisec, Thomas R.; Spiessbach, Andrew J.; Waldron, Kenneth J.

    1990-01-01

    Proposed agile walking robot operates over rocky, sandy, and sloping terrain. Offers stability and climbing ability superior to other conceptual mobile robots. Equipped with six articulated legs like those of insect, continually feels ground under leg before applying weight to it. If leg sensed unexpected object or failed to make contact with ground at expected point, seeks alternative position within radius of 20 cm. Failing that, robot halts, examines area around foot in detail with laser ranging imager, and replans entire cycle of steps for all legs before proceeding.

  14. Frequency agile relativistic magnetrons

    SciTech Connect

    Levine, J.S.; Harteneck, B.D.; Price, H.D.

    1995-11-01

    The authors are developing a family of frequency agile relativistic magnetrons to continuously cover the bands from 1 to 3 GHz. They have achieved tuning ranges of > 33%. The magnetrons have been operated repetitively in burst mode at rates up to 100 pps for 10 sec. Power is extracted from two resonators, and is in the range of 400--600 MW, fairly flat across the tuning bandwidth. They are using a network of phase shifters and 3-dB hybrids to combine the power into a single arm and to provide a continuously adjustable attenuator.

  15. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, Stephan P.

    1998-01-01

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy.

  16. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, S.P.

    1998-11-24

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy. 14 figs.

  17. The influence of agility training on physiological and cognitive performance.

    PubMed

    Lennemann, Lynette M; Sidrow, Kathryn M; Johnson, Erica M; Harrison, Catherine R; Vojta, Christopher N; Walker, Thomas B

    2013-12-01

    Agility training (AT) has recently been instituted in several military communities in hopes of improving combat performance and general fitness. The purpose of this study was to determine how substituting AT for traditional military physical training (PT) influences physical and cognitive performance. Forty-one subjects undergoing military technical training were divided randomly into 2 groups for 6 weeks of training. One group participated in standard military PT consisting of calisthenics and running. A second group duplicated the amount of exercise of the first group but used AT as their primary mode of training. Before and after training, subjects completed a physical and cognitive battery of tests including V[Combining Dot Above]O2max, reaction time, Illinois Agility Test, body composition, visual vigilance, dichotic listening, and working memory tests. There were significant improvements within the AT group in V[Combining Dot Above]O2max, Illinois Agility Test, visual vigilance, and continuous memory. There was a significant increase in time-to-exhaustion for the traditional group. We conclude that AT is as effective or more effective as PT in enhancing physical fitness. Further, it is potentially more effective than PT in enhancing specific measures of physical and cognitive performance, such as physical agility, memory, and vigilance. Consequently, we suggest that AT be incorporated into existing military PT programs as a way to improve war-fighter performance. Further, it seems likely that the benefits of AT observed here occur in various other populations. PMID:23442271

  18. Using augmented reality as a clinical support tool to assist combat medics in the treatment of tension pneumothoraces.

    PubMed

    Wilson, Kenneth L; Doswell, Jayfus T; Fashola, Olatokunbo S; Debeatham, Wayne; Darko, Nii; Walker, Travelyan M; Danner, Omar K; Matthews, Leslie R; Weaver, William L

    2013-09-01

    This study was to extrapolate potential roles of augmented reality goggles as a clinical support tool assisting in the reduction of preventable causes of death on the battlefield. Our pilot study was designed to improve medic performance in accurately placing a large bore catheter to release tension pneumothorax (prehospital setting) while using augmented reality goggles. Thirty-four preclinical medical students recruited from Morehouse School of Medicine performed needle decompressions on human cadaver models after hearing a brief training lecture on tension pneumothorax management. Clinical vignettes identifying cadavers as having life-threatening tension pneumothoraces as a consequence of improvised explosive device attacks were used. Study group (n = 13) performed needle decompression using augmented reality goggles whereas the control group (n = 21) relied solely on memory from the lecture. The two groups were compared according to their ability to accurately complete the steps required to decompress a tension pneumothorax. The medical students using augmented reality goggle support were able to treat the tension pneumothorax on the human cadaver models more accurately than the students relying on their memory (p < 0.008). Although the augmented reality group required more time to complete the needle decompression intervention (p = 0.0684), this did not reach statistical significance. PMID:24005547

  19. Agile manufacturing concept

    NASA Astrophysics Data System (ADS)

    Goldman, Steven L.

    1994-03-01

    The initial conceptualization of agile manufacturing was the result of a 1991 study -- chaired by Lehigh Professor Roger N. Nagel and California-based entrepreneur Rick Dove, President of Paradigm Shifts, International -- of what it would take for U.S. industry to regain global manufacturing competitiveness by the early twenty-first century. This industry-led study, reviewed by senior management at over 100 companies before its release, concluded that incremental improvement of the current system of manufacturing would not be enough to be competitive in today's global marketplace. Computer-based information and production technologies that were becoming available to industry opened up the possibility of an altogether new system of manufacturing, one that would be characterized by a distinctive integration of people and technologies; of management and labor; of customers, producers, suppliers, and society.

  20. Aircraft agility maneuvers

    NASA Technical Reports Server (NTRS)

    Cliff, Eugene M.; Thompson, Brian G.

    1992-01-01

    A new dynamic model for aircraft motions is presented. This model can be viewed as intermediate between a point-mass model, in which the body attitude angles are control-like, and a rigid-body model, in which the body-attitude angles evolve according to Newton's Laws. Specifically, consideration is given to the case of symmetric flight, and a model is constructed in which the body roll-rate and the body pitch-rate are the controls. In terms of this body-rate model a minimum-time heading change maneuver is formulated. When the bounds on the body-rates are large the results are similar to the point-mass model in that the model can very quickly change the applied forces and produce an acceleration to turn the vehicle. With finite bounds on these rates, the forces change in a smooth way. This leads to a measurable effect of agility.

  1. Anger in the combat zone.

    PubMed

    Reyes, Valvincent A; Hicklin, Thomas A

    2005-06-01

    A U.S. Army Reserve Combat Stress Control prevention team was dispatched to Afghanistan in support of Operation Enduring Freedom to provide preventative mental health care to a U.S. Army airborne division and Special Operations forces. The team's mission was to ensure mental health readiness of units in the area of operations. In Bagram, Afghanistan, the Combat Stress Control team identified anger as a very prevalent emotion in the combat zone. Anger management interventions with individual and group counseling were implemented to help soldiers cope with anger. Of 7,000 military personnel stationed there during the team's rotation, there was not one completed suicide or homicide. This article describes how the 113th Medical Company identified, treated, and controlled anger at Bagram Airbase, Afghanistan, between June 20, 2002, and December 20, 2002, with anger management interventions. This article does not address the psychophysiological features of anger. PMID:16001596

  2. Retention of Military Skills Acquired in Basic Combat Training.

    ERIC Educational Resources Information Center

    McDonald, Robert D.

    Performance data were collected in the three general basic combat training (BCT) proficiency areas (rifle marksmanship, physical combat fitness, end of cycle tests) from independent groups of soldiers (60 per group) during BCT, during Advanced Individual Training (AIT), and combat support training (CST), and for permanent party personnel in the…

  3. The Telemetry Agile Manufacturing Effort

    SciTech Connect

    Brown, K.D.

    1995-01-01

    The Telemetry Agile Manufacturing Effort (TAME) is an agile enterprising demonstration sponsored by the US Department of Energy (DOE). The project experimented with new approaches to product realization and assessed their impacts on performance, cost, flow time, and agility. The purpose of the project was to design the electrical and mechanical features of an integrated telemetry processor, establish the manufacturing processes, and produce an initial production lot of two to six units. This paper outlines the major methodologies utilized by the TAME, describes the accomplishments that can be attributed to each methodology, and finally, examines the lessons learned and explores the opportunities for improvement associated with the overall effort. The areas for improvement are discussed relative to an ideal vision of the future for agile enterprises. By the end of the experiment, the TAME reduced production flow time by approximately 50% and life cycle cost by more than 30%. Product performance was improved compared with conventional DOE production approaches.

  4. Towards a Framework for Using Agile Approaches in Global Software Development

    NASA Astrophysics Data System (ADS)

    Hossain, Emam; Ali Babar, Muhammad; Verner, June

    As agile methods and Global Software Development (GSD) are become increasingly popular, GSD project managers have been exploring the viability of using agile approaches in their development environments. Despite the expected benefits of using an agile approach with a GSD project, the overall combining mechanisms of the two approaches are not clearly understood. To address this challenge, we propose a conceptual framework, based on the research literature. This framework is expected to aid a project manager in deciding what agile strategies are effective for a particular GSD project, taking into account project context. We use an industry-based case study to explore the components of our conceptual framework. Our case study is planned and conducted according to specific published case study guidelines. We identify the agile practices and agile supporting practices used by a GSD project manager in our case study and conclude with future research directions.

  5. Human factors in agile manufacturing

    SciTech Connect

    Forsythe, C.

    1995-03-01

    As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.

  6. Agile automated vision

    NASA Astrophysics Data System (ADS)

    Fandrich, Juergen; Schmitt, Lorenz A.

    1994-11-01

    The microelectronic industry is a protagonist in driving automated vision to new paradigms. Today semiconductor manufacturers use vision systems quite frequently in their fabs in the front-end process. In fact, the process depends on reliable image processing systems. In the back-end process, where ICs are assembled and packaged, today vision systems are only partly used. But in the next years automated vision will become compulsory for the back-end process as well. Vision will be fully integrated into every IC package production machine to increase yields and reduce costs. Modem high-speed material processing requires dedicated and efficient concepts in image processing. But the integration of various equipment in a production plant leads to unifying handling of data flow and interfaces. Only agile vision systems can act with these contradictions: fast, reliable, adaptable, scalable and comprehensive. A powerful hardware platform is a unneglectable requirement for the use of advanced and reliable, but unfortunately computing intensive image processing algorithms. The massively parallel SIMD hardware product LANTERN/VME supplies a powerful platform for existing and new functionality. LANTERN/VME is used with a new optical sensor for IC package lead inspection. This is done in 3D, including horizontal and coplanarity inspection. The appropriate software is designed for lead inspection, alignment and control tasks in IC package production and handling equipment, like Trim&Form, Tape&Reel and Pick&Place machines.

  7. Candidate control design metrics for an agile fighter

    NASA Technical Reports Server (NTRS)

    Murphy, Patrick C.; Bailey, Melvin L.; Ostroff, Aaron J.

    1991-01-01

    Success in the fighter combat environment of the future will certainly demand increasing capability from aircraft technology. These advanced capabilities in the form of superagility and supermaneuverability will require special design techniques which translate advanced air combat maneuvering requirements into design criteria. Control design metrics can provide some of these techniques for the control designer. Thus study presents an overview of control design metrics and investigates metrics for advanced fighter agility. The objectives of various metric users, such as airframe designers and pilots, are differentiated from the objectives of the control designer. Using an advanced fighter model, metric values are documented over a portion of the flight envelope through piloted simulation. These metric values provide a baseline against which future control system improvements can be compared and against which a control design methodology can be developed. Agility is measured for axial, pitch, and roll axes. Axial metrics highlight acceleration and deceleration capabilities under different flight loads and include specific excess power measurements to characterize energy meneuverability. Pitch metrics cover both body-axis and wind-axis pitch rates and accelerations. Included in pitch metrics are nose pointing metrics which highlight displacement capability between the nose and the velocity vector. Roll metrics (or torsion metrics) focus on rotational capability about the wind axis.

  8. Evidence of Combat in Triceratops

    PubMed Central

    Farke, Andrew A.; Wolff, Ewan D. S.; Tanke, Darren H.

    2009-01-01

    Background The horns and frill of Triceratops and other ceratopsids (horned dinosaurs) are interpreted variously as display structures or as weapons against conspecifics and predators. Lesions (in the form of periosteal reactive bone, healing fractures, and alleged punctures) on Triceratops skulls have been used as anecdotal support of intraspecific combat similar to that in modern horned and antlered animals. If ceratopsids with different cranial morphologies used their horns in such combat, this should be reflected in the rates of lesion occurrence across the skull. Methodology/Principal Findings We used a G-test of independence to compare incidence rates of lesions in Triceratops (which possesses two large brow horns and a smaller nasal horn) and the related ceratopsid Centrosaurus (with a large nasal horn and small brow horns), for the nasal, jugal, squamosal, and parietal bones of the skull. The two taxa differ significantly in the occurrence of lesions on the squamosal bone of the frill (P = 0.002), but not in other cranial bones (P>0.20). Conclusions/Significance This pattern is consistent with Triceratops using its horns in combat and the frill being adapted as a protective structure for this taxon. Lower pathology rates in Centrosaurus may indicate visual rather than physical use of cranial ornamentation in this genus, or a form of combat focused on the body rather than the head. PMID:19172995

  9. The AGILE Data Center at ASDC

    NASA Astrophysics Data System (ADS)

    Pittori, Carlotta; AGILE Collaboration

    2013-01-01

    AGILE is a Scientific Mission of the Italian Space Agency (ASI) with INFN, INAF and CIFS participation, devoted to gamma-ray astrophysics. The satellite has been in orbit since April 23rd, 2007. Thanks to its sky monitoring capability and fast ground segment alert system, AGILE produced several important scientific results, among which was the unexpected discovery of strong and rapid gamma-ray flares from the Crab Nebula over daily timescales. This discovery won for the AGILE PI and the AGILE Team the Bruno Rossi Prize for 2012. The AGILE Data Center, located at ASDC, is in charge of all the scientific oriented activities related to the analysis and archiving of AGILE data. I will present the AGILE data center main activities, and I will give an overview of the AGILE scientific highlights after 5 years of operations.

  10. Creativity in Agile Systems Development: A Literature Review

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Wang, Xiaofeng; Fitzgerald, Brian

    Proponents of agile methods claim that enabling, fostering and driving creativity is the key motivation that differentiates agile methods from their more traditional, beauraucratic counterparts. However, there is very little rigorous research to support this claim. Like most of their predecessors, the development and promotion of these methods has been almost entirely driven by practitioners and consultants, with little objective validation from the research community. This lack of validation is particularly relevant for SMEs, given that many of their project teams typify the environment to which agile methods are most suited i.e. small, co-located teams with diverse, blended skills in unstructured, sometimes even chaotic surroundings. This paper uses creativity theory as a lens to review the current agile method literature to understand exactly how much we know about the extent to which creativity actually occurs in these agile environments. The study reveals many gaps and conflict of opinion in the body of knowledge in its current state and identifies many avenues for further research.

  11. Agile methods in biomedical software development: a multi-site experience report

    PubMed Central

    Kane, David W; Hohman, Moses M; Cerami, Ethan G; McCormick, Michael W; Kuhlmman, Karl F; Byrd, Jeff A

    2006-01-01

    Background Agile is an iterative approach to software development that relies on strong collaboration and automation to keep pace with dynamic environments. We have successfully used agile development approaches to create and maintain biomedical software, including software for bioinformatics. This paper reports on a qualitative study of our experiences using these methods. Results We have found that agile methods are well suited to the exploratory and iterative nature of scientific inquiry. They provide a robust framework for reproducing scientific results and for developing clinical support systems. The agile development approach also provides a model for collaboration between software engineers and researchers. We present our experience using agile methodologies in projects at six different biomedical software development organizations. The organizations include academic, commercial and government development teams, and included both bioinformatics and clinical support applications. We found that agile practices were a match for the needs of our biomedical projects and contributed to the success of our organizations. Conclusion We found that the agile development approach was a good fit for our organizations, and that these practices should be applicable and valuable to other biomedical software development efforts. Although we found differences in how agile methods were used, we were also able to identify a set of core practices that were common to all of the groups, and that could be a focus for others seeking to adopt these methods. PMID:16734914

  12. Lean and Agile Development of the AITS Ground Software System

    NASA Astrophysics Data System (ADS)

    Richters, Mark; Dutruel, Etienne; Mecredy, Nicolas

    2013-08-01

    We present the ongoing development of a new ground software system used for integrating, testing and operating spacecraft. The Advanced Integration and Test Services (AITS) project aims at providing a solution for electrical ground support equipment and mission control systems in future Astrium Space Transportation missions. Traditionally ESA ground or flight software development projects are conducted according to a waterfall-like process as specified in the ECSS-E-40 standard promoted by ESA in the European industry. In AITS a decision was taken to adopt an agile development process. This work could serve as a reference for future ESA software projects willing to apply agile concepts.

  13. Onshore and Offshore Outsourcing with Agility: Lessons Learned

    NASA Astrophysics Data System (ADS)

    Kussmaul, Clifton

    This chapter reflects on case study based an agile distributed project that ran for approximately three years (from spring 2003 to spring 2006). The project involved (a) a customer organization with key personnel distributed across the US, developing an application with rapidly changing requirements; (b) onshore consultants with expertise in project management, development processes, offshoring, and relevant technologies; and (c) an external offsite development team in a CMM-5 organization in southern India. This chapter is based on surveys and discussions with multiple participants. The several years since the project was completed allow greater perspective on both the strengths and weaknesses, since the participants can reflect on the entire life of the project, and compare it to subsequent experiences. Our findings emphasize the potential for agile project management in distributed software development, and the importance of people and interactions, taking many small steps to find and correct errors, and matching the structures of the project and product to support implementation of agility.

  14. Pathways to agility in the production of neutron generators

    SciTech Connect

    Stoltz, R.E.; Beavis, L.C.; Cutchen, J.T.; Garcia, P.; Gurule, G.A.; Harris, R.N.; McKey, P.C.; Williams, D.W.

    1994-02-01

    This report is the result of a study team commissioned to explore pathways for increased agility in the manufacture of neutron generators. As a part of Sandia`s new responsibility for generator production, the goal of the study was to identify opportunities to reduce costs and increase flexibility in the manufacturing operation. Four parallel approaches (or pathways) were recommended: (1) Know the goal, (2) Use design leverage effectively, (3) Value simplicity, and (4) Configure for flexibility. Agility in neutron generator production can be enhanced if all of these pathways are followed. The key role of the workforce in achieving agility was also noted, with emphasis on ownership, continuous learning, and a supportive environment.

  15. Impact of Agile Software Development Model on Software Maintainability

    ERIC Educational Resources Information Center

    Gawali, Ajay R.

    2012-01-01

    Software maintenance and support costs account for up to 60% of the overall software life cycle cost and often burdens tightly budgeted information technology (IT) organizations. Agile software development approach delivers business value early, but implications on software maintainability are still unknown. The purpose of this quantitative study…

  16. Agile Software Development Methods: A Comparative Review1

    NASA Astrophysics Data System (ADS)

    Abrahamsson, Pekka; Oza, Nilay; Siponen, Mikko T.

    Although agile software development methods have caught the attention of software engineers and researchers worldwide, scientific research still remains quite scarce. The aim of this study is to order and make sense of the different agile approaches that have been proposed. This comparative review is performed from the standpoint of using the following features as the analytical perspectives: project management support, life-cycle coverage, type of practical guidance, adaptability in actual use, type of research objectives and existence of empirical evidence. The results show that agile software development methods cover, without offering any rationale, different phases of the software development life-cycle and that most of these methods fail to provide adequate project management support. Moreover, quite a few methods continue to offer little concrete guidance on how to use their solutions or how to adapt them in different development situations. Empirical evidence after ten years of application remains quite limited. Based on the results, new directions on agile methods are outlined.

  17. An Investigation of Agility Issues in Scrum Teams Using Agility Indicators

    NASA Astrophysics Data System (ADS)

    Pikkarainen, Minna; Wang, Xiaofeng

    Agile software development methods have emerged and become increasingly popular in recent years; yet the issues encountered by software development teams that strive to achieve agility using agile methods are yet to be explored systematically. Built upon a previous study that has established a set of indicators of agility, this study investigates what issues are manifested in software development teams using agile methods. It is focussed on Scrum teams particularly. In other words, the goal of the chapter is to evaluate Scrum teams using agility indicators and therefore to further validate previously presented agility indicators within the additional cases. A multiple case study research method is employed. The findings of the study reveal that the teams using Scrum do not necessarily achieve agility in terms of team autonomy, sharing, stability and embraced uncertainty. The possible reasons include previous organizational plan-driven culture, resistance towards the Scrum roles and changing resources.

  18. The AGILE gamma-ray astronomy mission

    NASA Astrophysics Data System (ADS)

    Mereghetti, S.; Tavani, M.; Argan, A.; Barbiellini, G.; Caraveo, P.; Chen, A.; Cocco, V.; Costa, E.; Di Cocco, G.; Feroci, M.; Labanti, C.; Lapshov, I.; Lipari, P.; Longo, F.; Morselli, A.; Perotti, F.; Picozza, P.; Pittori, C.; Prest, M.; Rubini, A.; Soffitta, P.; Vallazza, E.; Vercellone, S.; Zanello, D.

    2001-09-01

    We describe the AGILE satellite: a unique tool for high-energy astrophysics in the 30 MeV - 50 GeV range before GLAST. The scientific performances of AGILE are comparable to those of EGRET, despite the much smaller weight and dimensions. The AGILE mission will be optimized for the imaging capabilities above 30 MeV and for the study of transient phenomena, complemented by simultaneous monitoring in the hard X-ray band (10 - 40 keV).

  19. Agile manufacturing and constraints management: a strategic perspective

    NASA Astrophysics Data System (ADS)

    Stratton, Roy; Yusuf, Yahaya Y.

    2000-10-01

    The definition of the agile paradigm has proved elusive and is often viewed as a panacea, in contention with more traditional approaches to operations strategy development and Larkin its own methodology and tools. The Theory of Constraints (TOC) is also poorly understood, as it is commonly solely associated with production planning and control systems and bottleneck management. This paper will demonstrate the synergy between these two approaches together with the Theory of Inventive Problem Solving (TRIZ), and establish how the systematic elimination of trade-offs can support the agile paradigm. Whereas agility is often seen as a trade-off free destination, both TOC and TRIZ may be considered to be route finders, as they comprise methodologies that focus on the identification and elimination of the trade-offs that constrain the purposeful improvement of a system, be it organizational or mechanical. This paper will also show how the TOC thinking process may be combined with the TRIZ knowledge based approach and used in breaking contradictions within agile logistics.

  20. Agent-based scheduling system to achieve agility

    NASA Astrophysics Data System (ADS)

    Akbulut, Muhtar B.; Kamarthi, Sagar V.

    2000-12-01

    Today's competitive enterprises need to design, develop, and manufacture their products rapidly and inexpensively. Agile manufacturing has emerged as a new paradigm to meet these challenges. Agility requires, among many other things, scheduling and control software systems that are flexible, robust, and adaptive. In this paper a new agent-based scheduling system (ABBS) is developed to meet the challenges of an agile manufacturing system. In ABSS, unlike in the traditional approaches, information and decision making capabilities are distributed among the system entities called agents. In contrast with the most agent-based scheduling systems which commonly use a bidding approach, the ABBS employs a global performance monitoring strategy. A production-rate-based global performance metric which effectively assesses the system performance is developed to assist the agents' decision making process. To test the architecture, an agent-based discrete event simulation software is developed. The experiments performed using the simulation software yielded encouraging results in supporting the applicability of agent-based systems to address the scheduling and control needs of an agile manufacturing system.

  1. Assessment of proposed fighter agility metrics

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.; Valasek, John; Eggold, David P.; Downing, David R.

    1990-01-01

    This paper presents the results of an analysis of proposed metrics to assess fighter aircraft agility. A novel framework for classifying these metrics is developed and applied. A set of transient metrics intended to quantify the axial and pitch agility of fighter aircraft is evaluated with a high fidelity, nonlinear F-18 simulation. Test techniques and data reduction method are proposed, and sensitivities to pilot introduced errors during flight testing is investigated. Results indicate that the power onset and power loss parameters are promising candidates for quantifying axial agility, while maximum pitch up and pitch down rates are for quantifying pitch agility.

  2. Three `C's of Agile Practice: Collaboration, Co-ordination and Communication

    NASA Astrophysics Data System (ADS)

    Sharp, Helen; Robinson, Hugh

    The importance of collaboration, co-ordination and communication in agile teams is often discussed and rarely disputed. These activities are supported through various practices including pairing, customer collaboration, stand-ups and the planning game. However the mechanisms used to support these activities are sometimes more difficult to pin down. We have been studying agile teams for over a decade, and have found that story cards and the Wall are central to an agile team's activity, and the information they hold and convey is crucial for supporting the team's collaboration and co-ordination activity. However the information captured by these usually physical artefacts pertains mainly to progress rather than to functional dependencies. This latter information is fundamental to any software development, and in a non-agile environment is usually contained in detailed documentation not generally produced in an agile team. Instead, this information resides in their communication and social practices. In this chapter we discuss these three ‘C's of agile development and what we know about how they are supported through story cards and the Wall.

  3. Multiply-agile encryption in high speed communication networks

    SciTech Connect

    Pierson, L.G.; Witzke, E.L.

    1997-05-01

    Different applications have different security requirements for data privacy, data integrity, and authentication. Encryption is one technique that addresses these requirements. Encryption hardware, designed for use in high-speed communications networks, can satisfy a wide variety of security requirements if that hardware is key-agile, robustness-agile and algorithm-agile. Hence, multiply-agile encryption provides enhanced solutions to the secrecy, interoperability and quality of service issues in high-speed networks. This paper defines these three types of agile encryption. Next, implementation issues are discussed. While single-algorithm, key-agile encryptors exist, robustness-agile and algorithm-agile encryptors are still research topics.

  4. Air Combat Simulator

    NASA Technical Reports Server (NTRS)

    1981-01-01

    By adapting COSMIC's One-on-One Adaptive Maneuvering Logic (AML) for two versus one simulation, Link Division was able to reduce software and other design/development costs. Enhancements to the AML program developed by Link for simulation of two-versus one combat, two trainees can simultaneously engage a computer driven target, thereby doubling the training utility of the simulator.

  5. The Introduction of Agility into Albania.

    ERIC Educational Resources Information Center

    Smith-Stevens, Eileen J.; Shkurti, Drita

    1998-01-01

    Describes a plan to introduce and achieve a national awareness of agility (and easy entry into the world market) for Albania through the relatively stable higher-education order. Agility's four strategic principles are enriching the customer, cooperating to enhance competitiveness, organizing to master change and uncertainty, and leveraging the…

  6. An Agile Course-Delivery Approach

    ERIC Educational Resources Information Center

    Capellan, Mirkeya

    2009-01-01

    In the world of software development, agile methodologies have gained popularity thanks to their lightweight methodologies and flexible approach. Many advocates believe that agile methodologies can provide significant benefits if applied in the educational environment as a teaching method. The need for an approach that engages and motivates…

  7. Teaching Agile Software Development: A Case Study

    ERIC Educational Resources Information Center

    Devedzic, V.; Milenkovic, S. R.

    2011-01-01

    This paper describes the authors' experience of teaching agile software development to students of computer science, software engineering, and other related disciplines, and comments on the implications of this and the lessons learned. It is based on the authors' eight years of experience in teaching agile software methodologies to various groups…

  8. ROADM architectures and technologies for agile optical networks

    NASA Astrophysics Data System (ADS)

    Eldada, Louay A.

    2007-02-01

    We review the different optoelectronic component and module technologies that have been developed for use in ROADM subsystems, and describe their principles of operation, designs, features, advantages, and challenges. We also describe the various needs for reconfigurable optical add/drop switching in agile optical networks. For each network need, we present the different ROADM subsystem architecture options with their pros and cons, and describe the optoelectronic technologies supporting each architecture.

  9. Some Findings Concerning Requirements in Agile Methodologies

    NASA Astrophysics Data System (ADS)

    Rodríguez, Pilar; Yagüe, Agustín; Alarcón, Pedro P.; Garbajosa, Juan

    Agile methods have appeared as an attractive alternative to conventional methodologies. These methods try to reduce the time to market and, indirectly, the cost of the product through flexible development and deep customer involvement. The processes related to requirements have been extensively studied in literature, in most cases in the frame of conventional methods. However, conclusions of conventional methodologies could not be necessarily valid for Agile; in some issues, conventional and Agile processes are radically different. As recent surveys report, inadequate project requirements is one of the most conflictive issues in agile approaches and better understanding about this is needed. This paper describes some findings concerning requirements activities in a project developed under an agile methodology. The project intended to evolve an existing product and, therefore, some background information was available. The major difficulties encountered were related to non-functional needs and management of requirements dependencies.

  10. Fighter agility metrics, research, and test

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.; Valasek, John; Eggold, David P.

    1990-01-01

    Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A completed set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation provided by the NASA Dryden Flight Research Center. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available. Simulation documentation and user instructions are provided in an appendix.

  11. Agile manufacturing from a statistical perspective

    SciTech Connect

    Easterling, R.G.

    1995-10-01

    The objective of agile manufacturing is to provide the ability to quickly realize high-quality, highly-customized, in-demand products at a cost commensurate with mass production. More broadly, agility in manufacturing, or any other endeavor, is defined as change-proficiency; the ability to thrive in an environment of unpredictable change. This report discusses the general direction of the agile manufacturing initiative, including research programs at the National Institute of Standards and Technology (NIST), the Department of Energy, and other government agencies, but focuses on agile manufacturing from a statistical perspective. The role of statistics can be important because agile manufacturing requires the collection and communication of process characterization and capability information, much of which will be data-based. The statistical community should initiate collaborative work in this important area.

  12. CT-assisted agile manufacturing

    NASA Astrophysics Data System (ADS)

    Stanley, James H.; Yancey, Robert N.

    1996-11-01

    The next century will witness at least two great revolutions in the way goods are produced. First, workers will use the medium of virtual reality in all aspects of marketing, research, development, prototyping, manufacturing, sales and service. Second, market forces will drive manufacturing towards small-lot production and just-in-time delivery. Already, we can discern the merging of these megatrends into what some are calling agile manufacturing. Under this new paradigm, parts and processes will be designed and engineered within the mind of a computer, tooled and manufactured by the offspring of today's rapid prototyping equipment, and evaluated for performance and reliability by advanced nondestructive evaluation (NDE) techniques and sophisticated computational models. Computed tomography (CT) is the premier example of an NDE method suitable for future agile manufacturing activities. It is the only modality that provides convenient access to the full suite of engineering data that users will need to avail themselves of computer- aided design, computer-aided manufacturing, and computer- aided engineering capabilities, as well as newly emerging reverse engineering, rapid prototyping and solid freeform fabrication technologies. As such, CT is assured a central, utilitarian role in future industrial operations. An overview of this exciting future for industrial CT is presented.

  13. Agile manufacturing prototyping system (AMPS)

    SciTech Connect

    Garcia, P.

    1998-05-09

    The Agile Manufacturing Prototyping System (AMPS) is being integrated at Sandia National Laboratories. AMPS consists of state of the industry flexible manufacturing hardware and software enhanced with Sandia advancements in sensor and model based control; automated programming, assembly and task planning; flexible fixturing; and automated reconfiguration technology. AMPS is focused on the agile production of complex electromechanical parts. It currently includes 7 robots (4 Adept One, 2 Adept 505, 1 Staubli RX90), conveyance equipment, and a collection of process equipment to form a flexible production line capable of assembling a wide range of electromechanical products. This system became operational in September 1995. Additional smart manufacturing processes will be integrated in the future. An automated spray cleaning workcell capable of handling alcohol and similar solvents was added in 1996 as well as parts cleaning and encapsulation equipment, automated deburring, and automated vision inspection stations. Plans for 1997 and out years include adding manufacturing processes for the rapid prototyping of electronic components such as soldering, paste dispensing and pick-and-place hardware.

  14. Requirement Changes and Project Success: The Moderating Effects of Agile Approaches in System Engineering Projects

    NASA Astrophysics Data System (ADS)

    Maierhofer, Sabine; Stelzmann, Ernst; Kohlbacher, Markus; Fellner, Björn

    This paper reports the findings of an empirical study on the influence agile development methods exert on the success of projects. The goal is to determine whether agile methods are able to mitigate negative effects requirement changes have on the performance of Systems Engineering projects, i.e. projects where systems consisting of hard- and software are developed. Agile methods have been proven to successfully support development projects in the field of traditional software engineering, but with an ever expending market of integrated systems manufacturers their usability for those complex projects has yet to be examined. This study focuses on 16 specific agile practices and their ability to improve the success of complex hard- and software projects.

  15. Hotspots of human-induced biomass productivity decline and their social-ecological types toward supporting national policy and local studies on combating land degradation

    NASA Astrophysics Data System (ADS)

    Vu, Quyet Manh; Le, Quang Bao; Vlek, Paul L. G.

    2014-10-01

    Identification and social-ecological characterization of areas that experience high levels of persistent productivity decline are essential for planning appropriate management measures. Although land degradation is mainly induced by human actions, the phenomenon is concurrently influenced by global climate changes that need to be taken into account in land degradation assessments. This study aims to delineate the geographic hotspots of human-induced land degradation in the country and classify the social-ecological characterizations of each specific degradation hotspot type. The research entailed a long-term time-series (1982-2006) of Normalized Difference Vegetation Index to specify the extents of areas with significant biomass decline or increase in Vietnam. Annual rainfall and temperature time-series were then used to separate areas of human-induced biomass productivity decline from those driven by climate dynamics. Next, spatial cluster analyses identified social-ecological types of degradation for guiding further investigations at regional and local scales. The results show that about 19% of the national land mass experienced persistent declines in biomass productivity over the last 25 years. Most of the degraded areas are found in the Southeast and Mekong River Delta (17,984 km2), Northwest Mountains (14,336 km2), and Central Highlands (13,504 km2). We identified six and five social-ecological types of degradation hotspots in agricultural and forested zones, respectively. Constraints in soil nutrient availability and nutrient retention capability are widely spreading in all degradation hotspot types. These hotspot types are different from each other in social and ecological conditions, suggesting that region-specific strategies are needed for the formulation of land degradation combating policy.

  16. Worldwide actions to combat abuse.

    PubMed

    1998-01-01

    This paper reports several developments on the global efforts to combat abuse and violence against women and children. It is noted that in South Africa, Belem, Brazil, and Lesotho, protest actions were conducted against women and child abuse. Although the protests were made separately, the protests generally called for implementation of initiatives from the government to address the issue of child and women abuse. In the context of preventing abusive behaviors, a study by the University of Cape Town in South Africa on the appropriateness and feasibility of short-term community-based group therapy concluded that such an approach might be effective in treating delinquent behavior. In Indonesia, the Rifka Annisa Women's Crisis Centre is working to combat violence against women by providing services to victims; while in Israel, a media campaign is aiming to increase awareness and support for women's help centers. In addition, the government of Bangladesh has established a Cell Against Violence Against Women that provides legal counseling and assistance for civil and criminal cases related to violence against women. Furthermore, the WHO and the International Federation of Obstetricians and Gynecologists have collaborated to conduct a joint workshop to explore how violence against women can be eliminated. PMID:12348694

  17. Models for computing combat risk

    NASA Astrophysics Data System (ADS)

    Jelinek, Jan

    2002-07-01

    Combat always involves uncertainty and uncertainty entails risk. To ensure that a combat task is prosecuted with the desired probability of success, the task commander has to devise an appropriate task force and then adjust it continuously in the course of battle. In order to do so, he has to evaluate how the probability of task success is related to the structure, capabilities and numerical strengths of combatants. For this purpose, predictive models of combat dynamics for combats in which the combatants fire asynchronously at random instants are developed from the first principles. Combats involving forces with both unlimited and limited ammunition supply are studied and modeled by stochastic Markov processes. In addition to the Markov models, another class of models first proposed by Brown was explored. The models compute directly the probability of win, in which we are primarily interested, without integrating the state probability equations. Experiments confirm that they produce exactly the same results at much lower computational cost.

  18. Opening up the Agile Innovation Process

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Donnellan, Brian; Morgan, Lorraine; Wang, Xiaofeng

    The objective of this panel is to discuss how firms can operate both an open and agile innovation process. In an era of unprecedented changes, companies need to be open and agile in order to adapt rapidly and maximize their innovation processes. Proponents of agile methods claim that one of the main distinctions between agile methods and their traditional bureaucratic counterparts is their drive toward creativity and innovation. However, agile methods are rarely adopted in their textbook, "vanilla" format, and are usually adopted in part or are tailored or modified to suit the organization. While we are aware that this happens, there is still limited understanding of what is actually happening in practice. Using innovation adoption theory, this panel will discuss the issues and challenges surrounding the successful adoption of agile practices. In addition, this panel will report on the obstacles and benefits reported by over 20 industrial partners engaged in a pan-European research project into agile practices between 2006 and 2009.

  19. Agility enabled by the SEMATECH CIM framework

    NASA Astrophysics Data System (ADS)

    Hawker, Scott; Waskiewicz, Fred

    1997-01-01

    The survivor in today's market environment is agile: able to survive and thrive in a market place marked by rapid, continuous change. For manufacturers, this includes an ability to rapidly develop, deploy and reconfigure manufacturing information and control systems. The SEMATECH CIM framework defines an application integration architecture and standard application components that enable agile manufacturing information and control systems. Further, the CIM framework and its evolution process foster virtual organizations of suppliers and manufacturers, combining their products and capabilities into an agile manufacturing information and control system.

  20. Are there atheists in foxholes? Combat intensity and religious behavior.

    PubMed

    Wansink, Brian; Wansink, Craig S

    2013-09-01

    After battle, the moral and mortality stresses influence different soldiers in different ways. Using two large-scale surveys of World War II veterans, this research investigates the impact of combat on religiosity. Study 1 shows that as combat became more frightening, the percentage of soldiers who reported praying rose from 42 to 72%. Study 2 shows that 50 years later, many soldiers still exhibited religious behavior, but it varied by their war experience. Soldiers who faced heavy combat (vs. no combat) attended church 21% more often if they claimed their war experience was negative, but those who claimed their experience was positive attended 26% less often. The more a combat veteran disliked the war, the more religious they were 50 years later. While implications for counselors, clergy, support groups, and health practitioners are outlined, saying there are no atheists in foxholes may be less of an argument against atheism than it is against foxholes. PMID:23760855

  1. Towards a Better Understanding of CMMI and Agile Integration - Multiple Case Study of Four Companies

    NASA Astrophysics Data System (ADS)

    Pikkarainen, Minna

    The amount of software is increasing in the different domains in Europe. This provides the industries in smaller countries good opportunities to work in the international markets. Success in the global markets however demands the rapid production of high quality, error free software. Both CMMI and agile methods seem to provide a ready solution for quality and lead time improvements. There is not, however, much empirical evidence available either about 1) how the integration of these two aspects can be done in practice or 2) what it actually demands from assessors and software process improvement groups. The goal of this paper is to increase the understanding of CMMI and agile integration, in particular, focusing on the research question: how to use ‘lightweight’ style of CMMI assessments in agile contexts. This is done via four case studies in which assessments were conducted using the goals of CMMI integrated project management and collaboration and coordination with relevant stakeholder process areas and practices from XP and Scrum. The study shows that the use of agile practices may support the fulfilment of the goals of CMMI process areas but there are still many challenges for the agile teams to be solved within the continuous improvement programs. It also identifies practical advices to the assessors and improvement groups to take into consideration when conducting assessment in the context of agile software development.

  2. Agile manufacturing concepts and opportunities in ceramics

    SciTech Connect

    Booth, C.L.; Harmer, M.P.

    1995-08-01

    In 1991 Lehigh University facilitated seminars over a period of 8 months to define manufacturing needs for the 21st century. They concluded that the future will be characterized by rapid changes in technology advances, customer demands, and shifts in market dynamics and coined the term {open_quotes}Agile Manufacturing{close_quotes}. Agile manufacturing refers to the ability to thrive in an environment of constant unpredictable change. Market opportunities are attacked by partnering to form virtual firms to dynamically obtain the required skills for each product opportunity. This paper will describe and compare agile vs. traditional concepts of organization & structure, management policy and ethics, employee environment, product focus, information, and paradigm shift. Examples of agile manufacturing applied to ceramic materials will be presented.

  3. Integrating a distributed, agile, virtual enterprise in the TEAM program

    NASA Astrophysics Data System (ADS)

    Cobb, C. K.; Gray, W. Harvey; Hewgley, Robert E.; Klages, Edward J.; Neal, Richard E.

    1997-01-01

    The technologies enabling agile manufacturing (TEAM) program enhances industrial capability by advancing and deploying manufacturing technologies that promote agility. TEAM has developed a product realization process that features the integration of product design and manufacturing groups. TEAM uses the tools it collects, develops, and integrates in support of the product realization process to demonstrate and deploy agile manufacturing capabilities for three high- priority processes identified by industry: material removal, forming, and electromechanical assembly. In order to provide a proof-of-principle, the material removal process has been addressed first and has been successfully demonstrate din an 'interconnected' mode. An internet-accessible intersite file manager (IFM) application has been deployed to allow geographically distributed TEAM participants to share and distribute information as the product realization process is executed. An automated inspection planning application has been demonstrated, importing a solid model form the IFM, generating an inspection plan and a part program to be used in the inspection process, and then distributing the part program to the inspection site via the IFM. TEAM seeks to demonstrate the material removal process in an integrated mode in June 1997 complete with an object-oriented framework and infrastructure. The current status and future plans for this project are presented here.

  4. Agile Data Curation at a State Geological Survey

    NASA Astrophysics Data System (ADS)

    Hills, D. J.

    2015-12-01

    State agencies, including geological surveys, are often the gatekeepers for myriad data products essential for scientific research and economic development. For example, the Geological Survey of Alabama (GSA) is mandated to explore for, characterize, and report Alabama's mineral, energy, water, and biological resources in support of economic development, conservation, management, and public policy for the betterment of Alabama's citizens, communities, and businesses. As part of that mandate, the GSA has increasingly been called upon to make our data more accessible to stakeholders. Even as demand for greater data accessibility grows, budgets for such efforts are often small, meaning that agencies must do more for less. Agile software development has yielded efficient, effective products, most often at lower cost and in shorter time. Taking guidance from the agile software development model, the GSA is working towards more agile data management and curation. To date, the GSA's work has been focused primarily on data rescue. By using workflows that maximize clear communication while encouraging simplicity (e.g., maximizing the amount of work not done or that can be automated), the GSA is bringing decades of dark data into the light. Regular checks by the data rescuer with the data provider (or their proxy) provides quality control without adding an overt burden on either party. Moving forward, these workflows will also allow for more efficient and effective data management.

  5. Agility Following the Application of Cold Therapy

    PubMed Central

    Evans, Todd A.; Ingersoll, Christopher; Knight, Kenneth L.; Worrell, Teddy

    1995-01-01

    Cold application is commonly used before strenuous exercise due to its hypalgesic effects. Some have questioned this procedure because of reports that cold may reduce isokinetic torque. However, there have been no investigations of actual physical performance following cold application. The purpose of this study was to determine if a 20-minute ice immersion treatment to the foot and ankle affected the performance of three agility tests: the carioca maneuver, the cocontraction test, and the shuttle run. Twenty-four male athletic subjects were tested during two different treatment sessions following an orientation session. Subjects were tested following a 20-minute 1°C ice immersion treatment to the dominant foot and ankle and 20 minutes of rest. Following each treatment, subjects performed three trials of each agility test, with 30 seconds rest between each trial, and 1 minute between each different agility test. The order in which each subject performed the agility tests was determined by a balanced Latin square. A MANOVA with repeated measures was used to determine if there was an overall significant difference in the agility times recorded between the cold and control treatments and if the order of the treatment sessions affected the scores. Although the mean agility time scores were slightly slower following the cold treatment, cooling the foot and ankle caused no difference in agility times. Also, there was no difference resulting from the treatment orders. We felt that the slightly slower scores may have been a result of tissue stiffness and/or subject's apprehension immediately following the cold treatment. Cold application to the foot and ankle can be used before strenuous exercise without altering agility. Imagesp232-a PMID:16558341

  6. Software ``Best'' Practices: Agile Deconstructed

    NASA Astrophysics Data System (ADS)

    Fraser, Steven

    Software “best” practices depend entirely on context - in terms of the problem domain, the system constructed, the software designers, and the “customers” ultimately deriving value from the system. Agile practices no longer have the luxury of “choosing” small non-mission critical projects with co-located teams. Project stakeholders are selecting and adapting practices based on a combina tion of interest, need and staffing. For example, growing product portfolios through a merger or the acquisition of a company exposes legacy systems to new staff, new software integration challenges, and new ideas. Innovation in communications (tools and processes) to span the growth and contraction of both information and organizations, while managing the adoption of changing software practices, is imperative for success. Traditional web-based tools such as web pages, document libraries, and forums are not suf ficient. A blend of tweeting, blogs, wikis, instant messaging, web-based confer encing, and telepresence creates a new dimension of communication “best” practices.

  7. Combating isolation: Building mutual mentoring networks

    NASA Astrophysics Data System (ADS)

    Cox, Anne J.

    2015-12-01

    Women physicists can often feel isolated at work. Support from a grant through the ADVANCE program of the National Science Foundation (U.S. government funding) created mutual mentoring networks aimed at combating isolation specifically for women faculty at undergraduate-only institutions. This paper will discuss the organization of one such network, what contributed to its success, some of the outcomes, and how it might be implemented in other contexts.

  8. National Center for Combating Terrorism Strategic Plan, September 2003

    SciTech Connect

    Bechtel Nevada

    2003-09-01

    National Center for Combating Terrorism Strategic Plan is to document the mission, vision, and goals for success; define the build plan; and describe initiatives that support the U.S. Department of Homeland Security, U.S. Department of Defense, U.S. Department of Energy, U.S. Department of Justice, intelligence community, National Governors Association, and other organizations or departments with combating terrorism training, testing, and technology responsibilities.

  9. Gamma-ray Astrophysics with AGILE

    SciTech Connect

    Longo, Francesco |; Tavani, M.; Barbiellini, G.; Argan, A.; Basset, M.; Boffelli, F.; Bulgarelli, A.; Caraveo, P.; Cattaneo, P.; Chen, A.; Costa, E.; Del Monte, E.; Di Cocco, G.; Di Persio, G.; Donnarumma, I.; Feroci, M.; Fiorini, M.; Foggetta, L.; Froysland, T.; Frutti, M.

    2007-07-12

    AGILE will explore the gamma-ray Universe with a very innovative instrument combining for the first time a gamma-ray imager and a hard X-ray imager. AGILE will be operational in spring 2007 and it will provide crucial data for the study of Active Galactic Nuclei, Gamma-Ray Bursts, unidentified gamma-ray sources. Galactic compact objects, supernova remnants, TeV sources, and fundamental physics by microsecond timing. The AGILE instrument is designed to simultaneously detect and image photons in the 30 MeV - 50 GeV and 15 - 45 keV energy bands with excellent imaging and timing capabilities, and a large field of view covering {approx} 1/5 of the entire sky at energies above 30 MeV. A CsI calorimeter is capable of GRB triggering in the energy band 0.3-50 MeV AGILE is now (March 2007) undergoing launcher integration and testing. The PLSV launch is planned in spring 2007. AGILE is then foreseen to be fully operational during the summer of 2007.

  10. Enterprise Technologies Deployment for Agile Manufacturing

    SciTech Connect

    Neal, R.E.

    1992-11-01

    This report is intended for high-level technical planners who are responsible for planning future developments for their company or Department of Energy/Defense Programs (DOE/DP) facilities. On one hand, the information may be too detailed or contain too much manufacturing technology jargon for a high-level, nontechnical executive, while at the same time an expert in any of the four infrastructure fields (Product Definition/Order Entry, Planning and Scheduling, Shop Floor Management, and Intelligent Manufacturing Systems) will know more than is conveyed here. The purpose is to describe a vision of technology deployment for an agile manufacturing enterprise. According to the 21st Century Manufacturing Enterprise Strategy, the root philosophy of agile manufacturing is that ``competitive advantage in the new systems will belong to agile manufacturing enterprises, capable of responding rapidly to demand for high-quality, highly customized products.`` Such agility will be based on flexible technologies, skilled workers, and flexible management structures which collectively will foster cooperative initiatives in and among companies. The remainder of this report is dedicated to sharpening our vision and to establishing a framework for defining specific project or pre-competitive project goals which will demonstrate agility through technology deployment.

  11. Enterprise Technologies Deployment for Agile Manufacturing

    SciTech Connect

    Neal, R.E.

    1992-11-01

    This report is intended for high-level technical planners who are responsible for planning future developments for their company or Department of Energy/Defense Programs (DOE/DP) facilities. On one hand, the information may be too detailed or contain too much manufacturing technology jargon for a high-level, nontechnical executive, while at the same time an expert in any of the four infrastructure fields (Product Definition/Order Entry, Planning and Scheduling, Shop Floor Management, and Intelligent Manufacturing Systems) will know more than is conveyed here. The purpose is to describe a vision of technology deployment for an agile manufacturing enterprise. According to the 21st Century Manufacturing Enterprise Strategy, the root philosophy of agile manufacturing is that competitive advantage in the new systems will belong to agile manufacturing enterprises, capable of responding rapidly to demand for high-quality, highly customized products.'' Such agility will be based on flexible technologies, skilled workers, and flexible management structures which collectively will foster cooperative initiatives in and among companies. The remainder of this report is dedicated to sharpening our vision and to establishing a framework for defining specific project or pre-competitive project goals which will demonstrate agility through technology deployment.

  12. Planning and scheduling for agile manufacturers: The Pantex Process Model

    SciTech Connect

    Kjeldgaard, E.A.; Jones, D.A.; List, G.F.; Tumquist, M.A.

    1998-02-01

    Effective use of resources that are shared among multiple products or processes is critical for agile manufacturing. This paper describes the development and implementation of a computerized model to support production planning in a complex manufacturing system at the Pantex Plant, a US Department of Energy facility. The model integrates two different production processes (nuclear weapon disposal and stockpile evaluation) that use common facilities and personnel at the plant. The two production processes are characteristic of flow-shop and job shop operations. The model reflects the interactions of scheduling constraints, material flow constraints, and the availability of required technicians and facilities. Operational results show significant productivity increases from use of the model.

  13. Production planning tools and techniques for agile manufacturing

    SciTech Connect

    Kjeldgaard, E.A.; Jones, D.A.; List, G.F.; Turnquist, M.A.

    1996-10-01

    Effective use of resources shared among multiple products or processes is critical for agile manufacturing. This paper describes development and implementation of a computerized model to support production planning in a complex manufacturing system at Pantex Plant. The model integrates two different production processes (nuclear weapon dismantlement and stockpile evaluation) which use common facilities and personnel, and reflects the interactions of scheduling constraints, material flow constraints, and resource availability. These two processes reflect characteristics of flow-shop and job-shop operations in a single facility. Operational results from using the model are also discussed.

  14. [A comparison of self assessment of dental status regarding dental anxiety among combat and non-combat soldiers].

    PubMed

    Levin, A; Zini, A

    2014-01-01

    The objective of the study was to evaluate the difference in the level of self dental assessment between different groups of soldiers: 115 combats and 115 non-combats. All the solders in this study where male, Jewish, with a service record of 12-48 months, ages 18-22 and born in Israel. The data was summarized, evaluated and tested by x2 - chi square and logistic regressions analysis. In the following parameters no significant differences were found regarding time past from last visit to the dentist, self assessment of dental condition, self assessment of need of dental treatment and the frequency of tooth brushing and sugar consumption. Significant differences were found in the percentage of smokers (59.1% among non-combat vs. 31.9% among combat), and in the dental anxiety level (55.3% among non-combat vs. 38% among combat). The main difference between these two groups is the nature of the social support and society surrounding them, a society that strengthens them and gives the feeling they can deal with fears and difficulties. An additional study should be done in which the soldiers self assessment should be compared to clinical examination. The importance of this study is that the non-combat group should be defined as a high risk population regarding dental anxiety. PMID:24654500

  15. Gamma-ray astrophysics with AGILE

    NASA Astrophysics Data System (ADS)

    Tavani, M.

    2003-09-01

    Gamma-ray astrophysics above 30 MeV will soon be revitalized by a new generation of high-energy detectors in space. We discuss here the AGILE Mission that will be dedicated to gamma-ray astrophysics above 30 MeV during the period 2005-2006. The main characteristics of AGILE are: (1) excellent imaging and monitoring capabilities both in the γ-ray (30 MeV - 30 GeV) and hard X-ray (10-40 keV) energy ranges (reaching an arcminute source positioning), (2) very good timing (improving by three orders of magnitude the instrumental deadtime for γ-ray detection compared to previous instruments), and (3) excellent imaging and triggering capability for Gamma-Ray Bursts. The AGILE scientific program will emphasize a quick response to gamma-ray transients and multiwavelength studies of gamma-ray sources.

  16. SuperAGILE and Gamma Ray Bursts

    SciTech Connect

    Pacciani, Luigi; Costa, Enrico; Del Monte, Ettore; Donnarumma, Immacolata; Evangelista, Yuri; Feroci, Marco; Frutti, Massimo; Lazzarotto, Francesco; Lapshov, Igor; Rubini, Alda; Soffitta, Paolo; Tavani, Marco; Barbiellini, Guido; Mastropietro, Marcello; Morelli, Ennio; Rapisarda, Massimo

    2006-05-19

    The solid-state hard X-ray imager of AGILE gamma-ray mission -- SuperAGILE -- has a six arcmin on-axis angular resolution in the 15-45 keV range, a field of view in excess of 1 steradian. The instrument is very light: 5 kg only. It is equipped with an on-board self triggering logic, image deconvolution, and it is able to transmit the coordinates of a GRB to the ground in real-time through the ORBCOMM constellation of satellites. Photon by photon Scientific Data are sent to the Malindi ground station at every contact. In this paper we review the performance of the SuperAGILE experiment (scheduled for a launch in the middle of 2006), after its first onground calibrations, and show the perspectives for Gamma Ray Bursts.

  17. Regenerative medicine applications in combat casualty care.

    PubMed

    Fleming, Mark E; Bharmal, Husain; Valerio, Ian

    2014-03-01

    The purpose of this report is to describe regenerative medicine applications in the management of complex injuries sustained by service members injured in support of the wars in Afghanistan and Iraq. Improvements in body armor, resuscitative techniques and faster transport have translated into increased patient survivability and more complex wounds. Combat-related blast injuries have resulted in multiple extremity injuries, significant tissue loss and amputations. Due to the limited availability and morbidity associated with autologous tissue donor sites, the introduction of regenerative medicine has been critical in managing war extremity injuries with composite massive tissue loss. Through case reports and clinical images, this report reviews the application of regenerative medicine modalities employed to manage combat-related injuries. It illustrates that the novel use of hybrid reconstructions combining traditional and regenerative medicine approaches are an effective tool in managing wounds. Lessons learned can be adapted to civilian care. PMID:24750059

  18. A review of the multiwavelength studies on the blazars detected by AGILE

    NASA Astrophysics Data System (ADS)

    Donnarumma, Immacolata; AGILE Team

    2012-03-01

    We report on the main results on gamma-ray blazars as obtained by AGILE during 4 years in orbit. AGILE detected several flaring blazars, mostly FSRQs, which were studied from radio to TeV energy bands thanks to the rapid dissemination of our alerts. In particular, we carried out several multifrequency campaigns resulted from the synergy with other observatories such as GASP-WEBT (GLAST-AGILE Support Programme of the Whole Earth Blazar Telescope network), REM, Spitzer, Swift, RXTE, XMM-Newton, Suzaku, INTEGRAL, MAGIC, VERITAS. Temporal and SED variabilities were studied in details thanks to the large set of simultaneous data. The most relevant properties of our sample of blazars will be presented with a particular emphasis on the spectral thermal components, time lags, spectral trends (in X-rays and gamma-rays), jet geometry and acceleration mechanism at the inner portion of the jet itself.

  19. Lean and Agile: An Epistemological Reflection

    ERIC Educational Resources Information Center

    Browaeys, Marie-Joelle; Fisser, Sandra

    2012-01-01

    Purpose: The aim of the paper is to contribute to the discussion of treating the concepts of lean and agile in isolation or combination by presenting an alternative view from complexity thinking on these concepts, considering an epistemological approach to this topic. Design/methodology/approach: The paper adopts an epistemological approach, using…

  20. Achieving agility through parameter space qualification

    SciTech Connect

    Diegert, K.V.; Easterling, R.G.; Ashby, M.R.; Benavides, G.L.; Forsythe, C.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1995-02-01

    The A-primed (Agile Product Realization of Innovative electro-Mechanical Devices) project is defining and proving processes for agile product realization for the Department of Energy complex. Like other agile production efforts reported in the literature, A-primed uses concurrent engineering and information automation technologies to enhance information transfer. A unique aspect of our approach to agility is the qualification during development of a family of related product designs and their production processes, rather than a single design and its attendant processes. Applying engineering principles and statistical design of experiments, economies of test and analytic effort are realized for the qualification of the device family as a whole. Thus the need is minimized for test and analysis to qualify future devices from this family, thereby further reducing the design-to-production cycle time. As a measure of the success of the A-primed approach, the first design took 24 days to produce, and operated correctly on the first attempt. A flow diagram for the qualification process is presented. Guidelines are given for implementation, based on the authors experiences as members of the A-primed qualification team.

  1. Autonomous Guidance of Agile Small-scale Rotorcraft

    NASA Technical Reports Server (NTRS)

    Mettler, Bernard; Feron, Eric

    2004-01-01

    This report describes a guidance system for agile vehicles based on a hybrid closed-loop model of the vehicle dynamics. The hybrid model represents the vehicle dynamics through a combination of linear-time-invariant control modes and pre-programmed, finite-duration maneuvers. This particular hybrid structure can be realized through a control system that combines trim controllers and a maneuvering control logic. The former enable precise trajectory tracking, and the latter enables trajectories at the edge of the vehicle capabilities. The closed-loop model is much simpler than the full vehicle equations of motion, yet it can capture a broad range of dynamic behaviors. It also supports a consistent link between the physical layer and the decision-making layer. The trajectory generation was formulated as an optimization problem using mixed-integer-linear-programming. The optimization is solved in a receding horizon fashion. Several techniques to improve the computational tractability were investigate. Simulation experiments using NASA Ames 'R-50 model show that this approach fully exploits the vehicle's agility.

  2. Interactive computerized air combat opponent

    NASA Technical Reports Server (NTRS)

    Hankins, W. W., III

    1976-01-01

    A computer program developed to fly interactive one-on-one simulated air combat maneuvers against human pilots is described. The program which is called Adaptive Maneuvering Logic (AML), is being used in the National Aeronautics and Space Administration (NASA) Langley Research Center's Differential Maneuvering Simulator. The basic control logic evaluates the relative states of the two aircraft and reacts by choosing the best of several elemental maneuvers. Pilot comments and results obtained when the computer was flown against combat-qualified fighter pilots indicate that the program performs realistic maneuvers and offers a very competitive standard pilot.

  3. Compact, Automated, Frequency-Agile Microspectrofluorimeter

    NASA Technical Reports Server (NTRS)

    Fernandez, Salvador M.; Guignon, Ernest F.

    1995-01-01

    Compact, reliable, rugged, automated cell-culture and frequency-agile microspectrofluorimetric apparatus developed to perform experiments involving photometric imaging observations of single live cells. In original application, apparatus operates mostly unattended aboard spacecraft; potential terrestrial applications include automated or semiautomated diagnosis of pathological tissues in clinical laboratories, biomedical instrumentation, monitoring of biological process streams, and portable instrumentation for testing biological conditions in various environments. Offers obvious advantages over present laboratory instrumentation.

  4. Agile manufacturing: The factory of the future

    NASA Technical Reports Server (NTRS)

    Loibl, Joseph M.; Bossieux, Terry A.

    1994-01-01

    The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

  5. Architecture-Centric Methods and Agile Approaches

    NASA Astrophysics Data System (ADS)

    Babar, Muhammad Ali; Abrahamsson, Pekka

    Agile software development approaches have had significant impact on industrial software development practices. Despite becoming widely popular, there is an increasing perplexity about the role and importance of a system’s software architecture in agile approaches [1, 2]. Advocates of the vital role of architecture in achieving quality goals of large-scale-software-intensive-systems are skeptics of the scalability of any development approach that does not pay sufficient attention to architectural issues. However, the proponents of agile approaches usually perceive the upfront design and evaluation of architecture as being of less value to the customers of a system. According to them, for example, re-factoring can help fix most of the problems. Many experiences show that large-scale re-factoring often results in significant defects, which are very costly to address later in the development cycle. It is considered that re-factoring is worthwhile as long as the high-level design is good enough to limit the need for large-scale re-factoring [1, 3, 4].

  6. First GRB detections with the AGILE Minicalorimeter

    SciTech Connect

    Marisaldi, M.; Labanti, C.; Fuschino, F.; Bulgarelli, A.; Gianotti, F.; Trifoglio, M.; Galli, M.; Tavani, M.; Argan, A.

    2008-05-22

    The Minicalorimeter (MCAL) onboard the AGILE satellite is a 1400 cm{sup 2} scintillation detector sensitive in the energy range 0.3-200 MeV. MCAL works both as a slave of the AGILE Silicon Tracker and as an autonomous detector for transient events (BURST mode). A dedicated onboard Burst Search logic scans BURST mode data in search of count rate increase. Peculiar characteristics of the detector are the high energy spectral coverage and a timing resolution of about 2 microseconds. Even if a trigger is not issued, BURST mode data are used to build a broad band energy spectrum (scientific ratemeters) organized in 11 bands for each of the two MCAL detection planes, with a time resolution of 1 second. After the first engineering commissioning phase, following the AGILE launch on 23rd April 2007, between 22nd June and 5th November 2007 eighteen GRBs were detected offline in the scientific ratemeters data, with a detection rate of about one per week. In this paper the capabilities of the detector will be described and an overview of the first detected GRBs will be given.

  7. Future Research in Agile Systems Development: Applying Open Innovation Principles Within the Agile Organisation

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Morgan, Lorraine

    A particular strength of agile approaches is that they move away from ‘introverted' development and intimately involve the customer in all areas of development, supposedly leading to the development of a more innovative and hence more valuable information system. However, we argue that a single customer representative is too narrow a focus to adopt and that involvement of stakeholders beyond the software development itself is still often quite weak and in some cases non-existent. In response, we argue that current thinking regarding innovation in agile development needs to be extended to include multiple stakeholders outside the business unit. This paper explores the intra-organisational applicability and implications of open innovation in agile systems development. Additionally, it argues for a different perspective of project management that includes collaboration and knowledge-sharing with other business units, customers, partners, and other relevant stakeholders pertinent to the business success of an organisation, thus embracing open innovation principles.

  8. The evaluation of several agility metrics for fighter aircraft using optimal trajectory analysis

    NASA Technical Reports Server (NTRS)

    Ryan, George W., III; Downing, David R.

    1993-01-01

    Several functional agility metrics, including the combat cycle time metric, dynamic speed turn plots, and relative energy state metric, are used to compare turning performance for generic F-18, X-29, and X-31-type aircraft models. These three-degree-of-freedom models have characteristics similar to the real aircraft. The performance comparisons are made using data from optimal test trajectories to reduce sensitivities to different pilot input techniques and to reduce the effects of control system limiters. The turn performance for all three aircraft is calculated for simulated minimum time 180 deg heading captures from simulation data. Comparisons of the three aircraft give more insight into turn performance than would be available from traditional measures of performance. Using the optimal test technique yields significant performance improvements as measured by the metrics. These performance improvements were found without significant increases in turn radius.

  9. Combating Stagefright: Selected Vocal Exercises.

    ERIC Educational Resources Information Center

    Ratliff, Gerald Lee

    Noting that stagefright has been the subject of intensive analysis and subjected to almost every conceivable test or measurement without revealing either its "cause" or its "cure," this paper presents vocal exercises to help combat the performance malady. After listing four principles concerning the nature of stagefright (it is not a pathological…

  10. Combating Training-Stress Syndromes.

    ERIC Educational Resources Information Center

    Voight, Mike

    2002-01-01

    Addresses the nature and ramifications of various training stress syndromes (overtraining, under-recovery, distress, staleness, and burnout) that can accompany inappropriate training practices, examining the interventions that players and coaches can use to combat these syndromes (including physical, psychological, and performance interventions),…

  11. Teaching Combative Sports through Tactics

    ERIC Educational Resources Information Center

    Kozub, Francis M.; Kozub, Mary L.

    2004-01-01

    Martial arts have become popular in the United States and have transitioned from being spectator sports to avenues for active participation by people of all ages. The purpose of this article is to highlight tactical similarities in selected combative sport activities and to provide martial arts and wrestling instructors with an alternative…

  12. Applying Agile MethodstoWeapon/Weapon-Related Software

    SciTech Connect

    Adams, D; Armendariz, M; Blackledge, M; Campbell, F; Cloninger, M; Cox, L; Davis, J; Elliott, M; Granger, K; Hans, S; Kuhn, C; Lackner, M; Loo, P; Matthews, S; Morrell, K; Owens, C; Peercy, D; Pope, G; Quirk, R; Schilling, D; Stewart, A; Tran, A; Ward, R; Williamson, M

    2007-05-02

    This white paper provides information and guidance to the Department of Energy (DOE) sites on Agile software development methods and the impact of their application on weapon/weapon-related software development. The purpose of this white paper is to provide an overview of Agile methods, examine the accepted interpretations/uses/practices of these methodologies, and discuss the applicability of Agile methods with respect to Nuclear Weapons Complex (NWC) Technical Business Practices (TBPs). It also provides recommendations on the application of Agile methods to the development of weapon/weapon-related software.

  13. Combating plagiarism: the role of the health librarian.

    PubMed

    Spring, Hannah; Adams, Rachel

    2013-12-01

    This feature looks at the issue of plagiarism in health care students and the role of the health librarian in combating the problem. In particular, consideration is given to how plagiarism can occur and provides some examples from two UK universities of approaches health librarians can take in supporting students to avoid these common pitfalls. PMID:24251896

  14. 32 CFR 813.4 - Combat camera operations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE SALES AND SERVICES VISUAL INFORMATION DOCUMENTATION PROGRAM § 813.4 Combat camera operations. (a) Air Force COMCAM forces document Air Force and air component activities. (b) The supported unified command or joint task force...

  15. 32 CFR 813.4 - Combat camera operations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE SALES AND SERVICES VISUAL INFORMATION DOCUMENTATION PROGRAM § 813.4 Combat camera operations. (a) Air Force COMCAM forces document Air Force and air component activities. (b) The supported unified command or joint task force...

  16. 32 CFR 813.4 - Combat camera operations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE SALES AND SERVICES VISUAL INFORMATION DOCUMENTATION PROGRAM § 813.4 Combat camera operations. (a) Air Force COMCAM forces document Air Force and air component activities. (b) The supported unified command or joint task force...

  17. Operative treatment of new onset radiculopathy secondary to combat injury.

    PubMed

    Wagner, Scott C; Van Blarcum, Gregory S; Kang, Daniel G; Lehman, Ronald A

    2015-02-01

    We set out to describe combat-related spine trauma over a 10-year period, and thereby determine the frequency of new onset radiculopathy secondary to injuries sustained in support of combat operations. We performed a retrospective analysis of a surgical database at three military institutions. Patients undergoing spine surgery following a combat-related injury in Afghanistan or Iraq between July 2003 and July 2013 were evaluated. We identified 105 patients with combat-related (Operations Enduring and Iraqi Freedom) spine trauma requiring operative intervention. Of these, 15 (14.3%) patients had radiculopathy as their primary complaint after injury. All patients were diagnosed with herniated nucleus pulposus. The average age was 39 years, with 80% injured in Iraq and 20% in Afghanistan. The most common mechanism of injury was mounted improvised explosive device (33%). The cervical spine was most commonly involved (53%), followed by lumbar spine (40%). Average time from injury to surgery was 23.4 months; 53% of patients had continued symptoms following surgery, and two patients had at least one revision surgery. Two patients were medically retired because of their symptoms. This study is the only of its kind evaluating the operative treatment of traumatic radiculopathy following combat-related trauma. We identified a relatively high rate of radiculopathy in these patients. PMID:25643379

  18. Agile informatics: application of agile project management to the development of a personal health application.

    PubMed

    Chung, Jeanhee; Pankey, Evan; Norris, Ryan J

    2007-01-01

    We describe the application of the Agile method-- a short iteration cycle, user responsive, measurable software development approach-- to the project management of a modular personal health record, iHealthSpace, to be deployed to the patients and providers of a large academic primary care practice. PMID:18694014

  19. AGILE detection of intense gamma-ray emission from the blazar PKS 1510-089

    NASA Astrophysics Data System (ADS)

    Pucella, G.; Vittorini, V.; D'Ammando, F.; Tavani, M.; Raiteri, C. M.; Villata, M.; Argan, A.; Barbiellini, G.; Boffelli, F.; Bulgarelli, A.; Caraveo, P.; Cattaneo, P. W.; Chen, A. W.; Cocco, V.; Costa, E.; Del Monte, E.; de Paris, G.; Di Cocco, G.; Donnarumma, I.; Evangelista, Y.; Feroci, M.; Fiorini, M.; Froysland, T.; Fuschino, F.; Galli, M.; Gianotti, F.; Giuliani, A.; Labanti, C.; Lapshov, I.; Lazzarotto, F.; Lipari, P.; Longo, F.; Marisaldi, M.; Mereghetti, S.; Morselli, A.; Pacciani, L.; Pellizzoni, A.; Perotti, F.; Picozza, P.; Prest, M.; Rapisarda, M.; Rappoldi, A.; Soffitta, P.; Trifoglio, M.; Trois, A.; Vallazza, E.; Vercellone, S.; Zambra, A.; Zanello, D.; Antonelli, L. A.; Colafrancesco, S.; Cutini, S.; Gasparrini, D.; Giommi, P.; Pittori, C.; Verrecchia, F.; Salotti, L.; Aller, M. F.; Aller, H. D.; Carosati, D.; Larionov, V. M.; Ligustri, R.

    2008-11-01

    Context: We report the detection by the AGILE (Astro-rivelatore Gamma a Immagini LEggero) satellite of an intense gamma-ray flare from the source AGL J1511-0909, associated with the powerful quasar PKS 1510-089, during ten days of observations from 23 August to 1 September 2007. Aims: During the observation period, the source was in optical decrease following a flaring event monitored by the GLAST-AGILE Support Program (GASP) of the Whole Earth Blazar Telescope (WEBT). The simultaneous gamma-ray, optical, and radio coverage allows us to study the spectral energy distribution and the theoretical models based on the synchrotron and inverse Compton (IC) emission mechanisms. Methods: AGILE observed the source with its two co-aligned imagers, the Gamma-Ray Imaging Detector and the hard X-ray imager Super-AGILE sensitive in the 30 MeV div 50 GeV and 18 div 60 keV bands, respectively. Results: Between 23 and 27 August 2007, AGILE detected gamma-ray emission from PKS 1510-089 when this source was located 50° off-axis, with an average flux of (270 ± 65) × 10-8 photons cm-2 s-1 for photon energy above 100 MeV. In the following period, 28 August-1 September, after a satellite re-pointing, AGILE detected the source at 35° off-axis, with an average flux (E > 100 MeV) of (195 ± 30) × 10-8 photons cm-2 s-1. No emission was detected by Super-AGILE, with a 3-σ upper limit of 45 mCrab in 200 ks. Conclusions: The spectral energy distribution is modelled with a homogeneous one-zone synchrotron self Compton (SSC) emission plus contributions by external photons: the SSC emission contributes primarily to the X-ray band, whereas the contribution of the IC from the external disc and the broad line region match the hard gamma-ray spectrum observed.

  20. Flat panels in future ground combat vehicles

    NASA Astrophysics Data System (ADS)

    Gurd, Eric D.; Forest, Coryne A.

    1996-05-01

    The efforts of the design team for the Crewman's Associate Advanced Technology Demonstration (CA ATD) and its use of advanced display concepts is discussed. This team has the responsibility of identifying future technologies with the potential for maximizing human- machine interaction for incorporation into future crew station designs for ground combat vehicles. The design process utilizes extensive user involvement in all stages. This is critical to developing systems that have complex functions, yet are simple to maintain and operate. Described are the needs which have driven the U.S. Army towards the use of flat panels. Ultimately, the army is looking at smaller, lighter, more deployable ground combat vehicles. This goal is driving individual components to have characteristics such as low weight, low power usage, and reduced volume while maintaining ruggedness and functionality. The potential applications for flat panels in ground vehicles is also discussed. The army is looking at applications for out-the-window views (virtual periscopes), multi-functional displays, and head mounted displays to accomplish its goals of designing better crew interfaces. The army's requirements in regards to the technologies that must be developed and supported by flat panel displays are also discussed in this section. In conclusion, future projections of the use of flat panels for the Crewman's Associate ATD will be outlined. Projections will be made in terms of physical numbers and promising technologies that fulfill the goals of the CAATD and achieve the approval of the user community.

  1. Combat-Related Invasive Fungal Wound Infections

    PubMed Central

    Rodriguez, Carlos J.

    2014-01-01

    Combat-related invasive fungal (mold) wound infections (IFIs) have emerged as an important and morbid complication following explosive blast injuries among military personnel. Similar to trauma-associated IFI cases among civilian populations, as in agricultural accidents and natural disasters, these infections occur in the setting of penetrating wounds contaminated by environmental debris. Specific risk factors for combat-related IFI include dismounted (patrolling on foot) blast injuries occurring mostly in southern Afghanistan, resulting in above knee amputations requiring resuscitation with large-volume blood transfusions. Diagnosis of IFI is based upon early identification of a recurrently necrotic wound following serial debridement and tissue-based histopathology examination with special stains to detect invasive disease. Fungal culture of affected tissue also provides supportive information. Aggressive surgical debridement of affected tissue is the primary therapy. Empiric antifungal therapy should be considered when there is a strong suspicion for IFI. Both liposomal amphotericin B and voriconazole should be considered initially for treatment since many of the cases involve not only Mucorales species but also Aspergillus or Fusarium spp., with narrowing of regimen based upon clinical mycology findings. PMID:25530825

  2. Agile Data Curation: A conceptual framework and approach for practitioner data management

    NASA Astrophysics Data System (ADS)

    Young, J. W.; Benedict, K. K.; Lenhardt, W. C.

    2015-12-01

    Data management occurs across a range of science and related activities such as decision-support. Exemplars within the science community operate data management systems that are extensively planned before implementation, staffed with robust data management expertise, equipped with appropriate services and technologies, and often highly structured. However, this is not the only approach to data management and almost certainly not the typical experience. The other end of the spectrum is often an ad hoc practitioner team, with changing requirements, limited training in data management, and resource constrained for both equipment and human resources. Much of the existing data management literature serves the exemplar community and ignores the ad hoc practitioners. Somewhere in the middle are examples where data are repurposed for new uses thereby generating new data management challenges. This submission presents a conceptualization of an Agile Data Curation approach that provides foundational principles for data management efforts operating across the spectrum of data generation and use from large science systems to efforts with constrained resources, limited expertise, and evolving requirements. The underlying principles to Agile Data Curation are a reapplication of agile software development principles to data management. The historical reality for many data management efforts is operating in a practioner environment so Agile Data Curation utilizes historical and current case studies to validate the foundational principles and through comparison learn lessons for future application. This submission will provide an overview of the Agile Data Curation, cover the foundational principles to the approach, and introduce a framework for gathering, classifying, and applying lessons from case studies of practitioner data management.

  3. Agile Development Methods for Space Operations

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Webster, Chris

    2012-01-01

    Main stream industry software development practice has gone from a traditional waterfall process to agile iterative development that allows for fast response to customer inputs and produces higher quality software at lower cost. How can we, the space ops community, adopt state of the art software development practice, achieve greater productivity at lower cost, and maintain safe and effective space flight operations? At NASA Ames, we are developing Mission Control Technologies Software, in collaboration with Johnson Space Center (JSC) and, more recently, the Jet Propulsion Laboratory (JPL).

  4. Abductive networks applied to electronic combat

    NASA Astrophysics Data System (ADS)

    Montgomery, Gerard J.; Hess, Paul; Hwang, Jong S.

    1990-08-01

    A practical approach to dealing with combinatorial decision problems and uncertainties associated with electronic combat through the use of networks of high-level functional elements called abductive networks is presented. It describes the application of the Abductory Induction Mechanism (AIMTM) a supervised inductive learning tool for synthesizing polynomial abductive networks to the electronic combat problem domain. From databases of historical expert-generated or simulated combat engagements AIM can often induce compact and robust network models for making effective real-time electronic combat decisions despite significant uncertainties or a combinatorial explosion of possible situations. The feasibility of applying abductive networks to realize advanced combat decision aiding capabilities was demonstrated by applying AIM to a set of electronic combat simulations. The networks synthesized by AIM generated accurate assessments of the intent lethality and overall risk associated with a variety of simulated threats and produced reasonable estimates of the expected effectiveness of a group of electronic countermeasures for a large number of simulated combat scenarios. This paper presents the application of abductive networks to electronic combat summarizes the results of experiments performed using AIM discusses the benefits and limitations of applying abductive networks to electronic combat and indicates why abductive networks can often result in capabilities not attainable using alternative approaches. 1. ELECTRONIC COMBAT. UNCERTAINTY. AND MACHINE LEARNING Electronic combat has become an essential part of the ability to make war and has become increasingly complex since

  5. The effects of wearing protective chemical warfare combat clothing on human performance.

    PubMed

    Taylor, H L; Orlansky, J

    1993-03-01

    U.S. Department of Defense studies to measure performance decrements associated with wearing chemical warfare (CW) protective combat clothing indicate that heat stress seriously degrades human performance. Even when heat stress is not a significant factor, performance of many combat, combat support, and combat service support tasks is degraded. In most field studies, many crews of combat units became operationally ineffective due to voluntary withdrawal of individual crewmembers. Many combined arms, field studies, and laboratory studies indicate that when CW-protective combat clothing is worn performance is seriously degraded for the detection of targets, engagement time, accuracy of fire, and manual dexterity tasks; and that a variety of psychological effects are created. Further, the degree of performance degradation varied with the tasks performed. Training in CW-protective combat clothing permits learning to modify procedures and consequently reduce negative effects, provided heat stress is not a significant factor. A growing body of evidence indicates there is inadequate training in the use of CW-protective combat clothing. A critical need exists for more and better training of skills needed under CW-conditions. PMID:8447813

  6. Agile Methods for Open Source Safety-Critical Software.

    PubMed

    Gary, Kevin; Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

    2011-08-01

    The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the rightamount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion. PMID:21799545

  7. Agile Methods for Open Source Safety-Critical Software

    PubMed Central

    Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

    2011-01-01

    The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the right amount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion. PMID:21799545

  8. Peridigm summary report : lessons learned in development with agile components.

    SciTech Connect

    Salinger, Andrew Gerhard; Mitchell, John Anthony; Littlewood, David John; Parks, Michael L.

    2011-09-01

    This report details efforts to deploy Agile Components for rapid development of a peridynamics code, Peridigm. The goal of Agile Components is to enable the efficient development of production-quality software by providing a well-defined, unifying interface to a powerful set of component-based software. Specifically, Agile Components facilitate interoperability among packages within the Trilinos Project, including data management, time integration, uncertainty quantification, and optimization. Development of the Peridigm code served as a testbed for Agile Components and resulted in a number of recommendations for future development. Agile Components successfully enabled rapid integration of Trilinos packages into Peridigm. A cost of this approach, however, was a set of restrictions on Peridigm's architecture which impacted the ability to track history-dependent material data, dynamically modify the model discretization, and interject user-defined routines into the time integration algorithm. These restrictions resulted in modifications to the Agile Components approach, as implemented in Peridigm, and in a set of recommendations for future Agile Components development. Specific recommendations include improved handling of material states, a more flexible flow control model, and improved documentation. A demonstration mini-application, SimpleODE, was developed at the onset of this project and is offered as a potential supplement to Agile Components documentation.

  9. Agile manufacturing in Intelligence, Surveillance and Reconnaissance (ISR)

    NASA Astrophysics Data System (ADS)

    DiPadua, Mark; Dalton, George

    2016-05-01

    The objective of the Agile Manufacturing for Intelligence, Surveillance, and Reconnaissance (AMISR) effort is to research, develop, design and build a prototype multi-intelligence (multi-INT), reconfigurable pod demonstrating benefits of agile manufacturing and a modular open systems approach (MOSA) to make podded intelligence, surveillance, and reconnaissance (ISR) capability more affordable and operationally flexible.

  10. Agile Bodies: A New Imperative in Neoliberal Governance

    ERIC Educational Resources Information Center

    Gillies, Donald

    2011-01-01

    Modern business discourse suggests that a key bulwark against market fluctuation and the threat of failure is for organizations to become "agile'", a more dynamic and proactive position than that previously afforded by mere "flexibility". The same idea is also directed at the personal level, it being argued that the "agile" individual is better…

  11. A Roadmap for Using Agile Development in a Traditional Environment

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara; Starbird, Thomas; Grenander, Sven

    2006-01-01

    One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases, they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At the Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and processes for developing software. This paper will discuss some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies and processes.

  12. A Roadmap for Using Agile Development in a Traditional Environment

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara A.; Starbird, Thomas; Grenander, Sven

    2006-01-01

    One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and procedure for developing software. This paper will discuss the some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies.

  13. Integrated product definition representation for agile numerical control applications

    SciTech Connect

    Simons, W.R. Jr.; Brooks, S.L.; Kirk, W.J. III; Brown, C.W.

    1994-11-01

    Realization of agile manufacturing capabilities for a virtual enterprise requires the integration of technology, management, and work force into a coordinated, interdependent system. This paper is focused on technology enabling tools for agile manufacturing within a virtual enterprise specifically relating to Numerical Control (N/C) manufacturing activities and product definition requirements for these activities.

  14. Introduction to Stand-up Meetings in Agile Methods

    NASA Astrophysics Data System (ADS)

    Hasnain, Eisha; Hall, Tracy

    2009-05-01

    In recent years, agile methods have become more popular in the software industry. Agile methods are a new approach compared to plan-driven approaches. One of the most important shifts in adopting an agile approach is the central focus given to people in the process. This is exemplified by the independence afforded to developers in the development work they do. This work investigates the opinions of practitioners about daily stand-up meetings in the agile methods and the role of developer in that. For our investigation we joined a yahoo group called "Extreme Programming". Our investigation suggests that although trust is an important factor in agile methods. But stand-ups are not the place to build trust.

  15. Frequency-agile wireless sensor networks

    NASA Astrophysics Data System (ADS)

    Arms, Steven W.; Townsend, Christopher P.; Churchill, David L.; Hamel, Michael J.; Galbreath, Jacob H.; Mundell, Steven W.

    2004-07-01

    Our goal was to demonstrate a wireless communications system capable of simultaneous, high speed data communications from a variety of sensors. We have previously reported on the design and application of 2 KHz data logging transceiver nodes, however, only one node may stream data at a time, since all nodes on the network use the same communications frequency. To overcome these limitations, second generation data logging transceivers were developed with software programmable radio frequency (RF) communications. Each node contains on-board memory (2 Mbytes), sensor excitation, instrumentation amplifiers with programmable gains & offsets, multiplexer, 16 bit A/D converter, microcontroller, and frequency agile, bi-directional, frequency shift keyed (FSK) RF serial data link. These systems are capable of continuous data transmission from 26 distinct nodes (902-928 MHz band, 75 kbaud). The system was demonstrated in a compelling structural monitoring application. The National Parks Service requested a means for continual monitoring and recording of sensor data from the Liberty Bell during a move to a new location (Philadelphia, October 2003). Three distinct, frequency agile, wireless sensing nodes were used to detect visible crack shear/opening micromotions, triaxial accelerations, and hairline crack tip strains. The wireless sensors proved to be useful in protecting the Liberty Bell.

  16. The effect of algorithm-agile encryption on ATM quality of service

    SciTech Connect

    Sholander, P.; Tarman, T.; Pierson, L.; Hutchinson, R.

    1997-04-01

    Asynchronous Transfer Mode (ATM) users often open multiple ATM Virtual Circuits (VCs) to multiple ATM users on multiple ATM networks. Each network and user may implement a different encryption policy. Hence ATM users may need shared, flexible hardware-based 3encryption that supports multiple encryption algorithms for multiple concurrent ATM users and VCs. An algorithm-agile encryption architecture, that uses multiple, parallel encryption-pipelines, is proposed. That algorithm-agile encryptor`s effect on the ATM Quality of Service (QoS) metrics, such as Cell Transfer Delay (CTD) and Cell Delay Variation (CDV), is analyzed. Bounds on the maximum CDV and the CDV`s probability density are derived.

  17. Taking Another Look at the Data Management Life Cycle: Deconstruction, Agile, and Community

    NASA Astrophysics Data System (ADS)

    Young, J. W.; Lenhardt, W. C.; Parsons, M. A.; Benedict, K. K.

    2014-12-01

    The data life cycle has figured prominently in describing the context of digital scientific data stewardship and cyberinfractructure in support of science. There are many different versions of the data life cycle, but they all follow a similar basic pattern: plan, collect, ingest, asses, preserve, discover, and reuse. The process is often interpreted in a fairly linear fashion despite it being a cycle conceptually. More recently at GeoData 2014 and elsewhere, questions have been raised about the utility of the data life cycle as it is currently represented. We are proposing to the community a re-examination of the data life cycle using an agile lens. Our goal is not to deploy agile methods, but to use agile principles as a heuristic to think about how to incorporate data stewardship across the scientific process from proposal stage to research and beyond. We will present alternative conceptualizations of the data life cycle with a goal to solicit feedback and to develop a new model for conceiving and describing the overall data stewardship process. We seek to re-examine past assumptions and shed new light on the challenges and necessity of data stewardship. The ultimate goal is to support new science through enhanced data interoperability, usability, and preservation.

  18. Assured communications and combat resiliency: the relationship between effective national communications and combat efficiency

    NASA Astrophysics Data System (ADS)

    Allgood, Glenn O.; Kuruganti, Phani Teja; Nutaro, James; Saffold, Jay

    2009-05-01

    Combat resiliency is the ability of a commander to prosecute, control, and consolidate his/her's sphere of influence in adverse and changing conditions. To support this, an infrastructure must exist that allows the commander to view the world in varying degrees of granularity with sufficient levels of detail to permit confidence estimates to be levied against decisions and course of actions. An infrastructure such as this will include the ability to effectively communicate context and relevance within and across the battle space. To achieve this will require careful thought, planning, and understanding of a network and its capacity limitations in post-event command and control. Relevance and impact on any existing infrastructure must be fully understood prior to deployment to exploit the system's full capacity and capabilities. In this view, the combat communication network is considered an integral part of or National communication network and infrastructure. This paper will describe an analytical tool set developed at ORNL and RNI incorporating complexity theory, advanced communications modeling, simulation, and visualization technologies that could be used as a pre-planning tool or post event reasoning application to support response and containment.

  19. Agile: From Software to Mission System

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Shirley, Mark H.; Hobart, Sarah Groves

    2016-01-01

    The Resource Prospector (RP) is an in-situ resource utilization (ISRU) technology demonstration mission, designed to search for volatiles at the Lunar South Pole. This is NASA's first near real time tele-operated rover on the Moon. The primary objective is to search for volatiles at one of the Lunar Poles. The combination of short mission duration, a solar powered rover, and the requirement to explore shadowed regions makes for an operationally challenging mission. To maximize efficiency and flexibility in Mission System design and thus to improve the performance and reliability of the resulting Mission System, we are tailoring Agile principles that we have used effectively in ground data system software development and applying those principles to the design of elements of the mission operations system.

  20. Compact, flexible, frequency agile parametric wavelength converter

    DOEpatents

    Velsko, Stephan P.; Yang, Steven T.

    2002-01-01

    This improved Frequency Agile Optical Parametric Oscillator provides near on-axis pumping of a single QPMC with a tilted periodically poled grating to overcome the necessity to find a particular crystal that will permit collinear birefringence in order to obtain a desired tuning range. A tilted grating design and the elongation of the transverse profile of the pump beam in the angle tuning plane of the FA-OPO reduces the rate of change of the overlap between the pumped volume in the crystal and the resonated and non-resonated wave mode volumes as the pump beam angle is changed. A folded mirror set relays the pivot point for beam steering from a beam deflector to the center of the FA-OPO crystal. This reduces the footprint of the device by as much as a factor of two over that obtained when using the refractive telescope design.

  1. Agility and mixed-model furniture production

    NASA Astrophysics Data System (ADS)

    Yao, Andrew C.

    2000-10-01

    The manufacture of upholstered furniture provides an excellent opportunity to analyze the effect of a comprehensive communication system on classical production management functions. The objective of the research is to study the scheduling heuristics that embrace the concepts inherent in MRP, JIT and TQM while recognizing the need for agility in a somewhat complex and demanding environment. An on-line, real-time data capture system provides the status and location of production lots, components, subassemblies for schedule control. Current inventory status of raw material and purchased items are required in order to develop and adhere to schedules. For the large variety of styles and fabrics customers may order, the communication system must provide timely, accurate and comprehensive information for intelligent decisions with respect to the product mix and production resources.

  2. A formulation and analysis of combat games

    NASA Technical Reports Server (NTRS)

    Heymann, M.; Ardema, M. D.; Rajan, N.

    1985-01-01

    Combat is formulated as a dynamical encounter between two opponents, each of whom has offensive capabilities and objectives. With each opponent is associated a target in the event space in which he endeavors to terminate the combat, thereby winning. If the combat terminates in both target sets simultaneously or in neither, a joint capture or a draw, respectively, is said to occur. Resolution of the encounter is formulated as a combat game; namely, as a pair of competing event-constrained differential games. If exactly one of the players can win, the optimal strategies are determined from a resulting constrained zero-sum differential game. Otherwise the optimal strategies are computed from a resulting non-zero-sum game. Since optimal combat strategies frequencies may not exist, approximate of delta-combat games are also formulated leading to approximate or delta-optimal strategies. To illustrate combat games, an example, called the turret game, is considered. This game may be thought of as a highly simplified model of air combat, yet it is sufficiently complex to exhibit a rich variety of combat behavior, much of which is not found in pursuit-evasion games.

  3. Agile parallel bioinformatics workflow management using Pwrake

    PubMed Central

    2011-01-01

    Background In bioinformatics projects, scientific workflow systems are widely used to manage computational procedures. Full-featured workflow systems have been proposed to fulfil the demand for workflow management. However, such systems tend to be over-weighted for actual bioinformatics practices. We realize that quick deployment of cutting-edge software implementing advanced algorithms and data formats, and continuous adaptation to changes in computational resources and the environment are often prioritized in scientific workflow management. These features have a greater affinity with the agile software development method through iterative development phases after trial and error. Here, we show the application of a scientific workflow system Pwrake to bioinformatics workflows. Pwrake is a parallel workflow extension of Ruby's standard build tool Rake, the flexibility of which has been demonstrated in the astronomy domain. Therefore, we hypothesize that Pwrake also has advantages in actual bioinformatics workflows. Findings We implemented the Pwrake workflows to process next generation sequencing data using the Genomic Analysis Toolkit (GATK) and Dindel. GATK and Dindel workflows are typical examples of sequential and parallel workflows, respectively. We found that in practice, actual scientific workflow development iterates over two phases, the workflow definition phase and the parameter adjustment phase. We introduced separate workflow definitions to help focus on each of the two developmental phases, as well as helper methods to simplify the descriptions. This approach increased iterative development efficiency. Moreover, we implemented combined workflows to demonstrate modularity of the GATK and Dindel workflows. Conclusions Pwrake enables agile management of scientific workflows in the bioinformatics domain. The internal domain specific language design built on Ruby gives the flexibility of rakefiles for writing scientific workflows. Furthermore, readability

  4. Emergent interfacility evacuation of critical care patients in combat.

    PubMed

    Franco, Yvonne E; De Lorenzo, Robert A; Salyer, Steven W

    2012-01-01

    During the Second Iraq War (Operation Iraqi Freedom), high-intensity, low-utilization medical and surgical services, such as neurosurgical care, were consolidated into a centralized location within the combat zone. This arrangement necessitated intra-theater air medical evacuation of critically ill or injured patients from outlying combat support hospitals (CSH) to another combat zone facility having the needed services. A case series is presented of intratheater transfer of neurosurgical patients in Iraq during 2005-06. Ninety-eight patients are included in the series, with typical transfer distances of 40 miles (approximately 20-25 minutes of flight time). All patients were transported with a CSH nurse in addition to the standard Army EMT-B flight medic. Seventy-six percent of cases were battle injury, 17% were non-battle injuries, and the balance were classified as non-injury mechanisms. Seventy-six percent of cases were head injuries, with the balance involving burns, stroke, and other injuries. At 30 days, 12% of the patients had died, and 9% remained hospitalized in a critical care setting. None of the patients died during evacuation. Intratheater and interfacility transfer of critical care patients in the combat theater often involves severely head-injured and other neurosurgical cases. Current Army staffing for helicopter transport in these case requires a nurse or other advanced personnel to supplement the standard EMT-B flight medic. PMID:22748416

  5. Agile rediscovering values: Similarities to continuous improvement strategies

    NASA Astrophysics Data System (ADS)

    Díaz de Mera, P.; Arenas, J. M.; González, C.

    2012-04-01

    Research in the late 80's on technological companies that develop products of high value innovation, with sufficient speed and flexibility to adapt quickly to changing market conditions, gave rise to the new set of methodologies known as Agile Management Approach. In the current changing economic scenario, we considered very interesting to study the similarities of these Agile Methodologies with other practices whose effectiveness has been amply demonstrated in both the West and Japan. Strategies such as Kaizen, Lean, World Class Manufacturing, Concurrent Engineering, etc, would be analyzed to check the values they have in common with the Agile Approach.

  6. GRB 070724B: the first Gamma Ray Burst localized by SuperAGILE

    SciTech Connect

    Del Monte, E.; Costa, E.; Donnarumma, I.; Feroci, M.; Lapshov, I.; Lazzarotto, F.; Soffitta, P.; Argan, A.; Pucella, G.; Trois, A.; Vittorini, V.; Evangelista, Y.; Rapisarda, M.; Barbiellini, G.; Longo, F.; Basset, M.; Foggetta, L.; Vallazza, E.; Bulgarelli, A.; Di Cocco, G.

    2008-05-22

    GRB070724B is the first Gamma Ray Burst localized by the SuperAGILE instrument aboard the AGILE space mission. The SuperAGILE localization has been confirmed after the after-glow observation by the XRT aboard the Swift satellite. No significant gamma ray emission above 50 MeV has been detected for this GRB. In this paper we describe the SuperAGILE capabilities in detecting Gamma Ray Burst and the AGILE observation of GRB 070724B.

  7. Frequency agile OPO-based transmitters for multiwavelength DIAL

    SciTech Connect

    Velsko, S.P.; Ruggiero, A.; Herman, M.

    1996-09-01

    We describe a first generation mid-infrared transmitter with pulse to pulse frequency agility and both wide and narrow band capability. This transmitter was used to make multicomponent Differential Absorption LIDAR (DIAL) measurements in the field.

  8. Investigation into the impact of agility on conceptual fighter design

    NASA Technical Reports Server (NTRS)

    Engelbeck, R. M.

    1995-01-01

    The Agility Design Study was performed by the Boeing Defense and Space Group for the NASA Langley Research Center. The objective of the study was to assess the impact of agility requirements on new fighter configurations. Global trade issues investigated were the level of agility, the mission role of the aircraft (air-to-ground, multi-role, or air-to-air), and whether the customer is Air force, Navy, or joint service. Mission profiles and design objectives were supplied by NASA. An extensive technology assessment was conducted to establish the available technologies to industry for the aircraft. Conceptual level methodology is presented to assess the five NASA-supplied agility metrics. Twelve configurations were developed to address the global trade issues. Three-view drawings, inboard profiles, and performance estimates were made and are included in the report. A critical assessment and lessons learned from the study are also presented.

  9. Augmented Reality for Close Quarters Combat

    ScienceCinema

    None

    2014-06-23

    Sandia National Laboratories has developed a state-of-the-art augmented reality training system for close-quarters combat (CQB). This system uses a wearable augmented reality system to place the user in a real environment while engaging enemy combatants in virtual space (Boston Dynamics DI-Guy). Umbra modeling and simulation environment is used to integrate and control the AR system.

  10. A formulation and analysis of combat games

    NASA Technical Reports Server (NTRS)

    Heymann, M.; Ardema, M. D.; Rajan, N.

    1984-01-01

    Combat which is formulated as a dynamical encounter between two opponents, each of whom has offensive capabilities and objectives is outlined. A target set is associated with each opponent in the event space in which he endeavors to terminate the combat, thereby winning. If the combat terminates in both target sets simultaneously, or in neither, a joint capture or a draw, respectively, occurs. Resolution of the encounter is formulated as a combat game; as a pair of competing event constrained differential games. If exactly one of the players can win, the optimal strategies are determined from a resulting constrained zero sum differential game. Otherwise the optimal strategies are computed from a resulting nonzero sum game. Since optimal combat strategies may frequently not exist, approximate or delta combat games are also formulated leading to approximate or delta optimal strategies. The turret game is used to illustrate combat games. This game is sufficiently complex to exhibit a rich variety of combat behavior, much of which is not found in pursuit evasion games.

  11. Augmented Reality for Close Quarters Combat

    SciTech Connect

    2013-09-20

    Sandia National Laboratories has developed a state-of-the-art augmented reality training system for close-quarters combat (CQB). This system uses a wearable augmented reality system to place the user in a real environment while engaging enemy combatants in virtual space (Boston Dynamics DI-Guy). Umbra modeling and simulation environment is used to integrate and control the AR system.

  12. The first AGILE low-energy (< 30 MeV) Terrestrial Gamma-ray Flashes catalog

    NASA Astrophysics Data System (ADS)

    Marisaldi, Martino; Fuschino, Fabio; Pittori, Carlotta; Verrecchia, Francesco; Giommi, Paolo; Tavani, Marco; Dietrich, Stefano; Price, Colin; Argan, Andrea; Labanti, Claudio; Galli, Marcello; Longo, Francesco; Del Monte, Ettore; Barbiellini, Guido; Giuliani, Andrea; Bulgarelli, Andrea; Gianotti, Fulvio; Trifoglio, Massimo; Trois, Alessio

    2014-05-01

    We present the first catalog of Terrestrial Gamma-ray Flashes (TGFs) detected by the Minicalorimeter (MCAL) instrument on-board the AGILE satellite. The catalog includes 308 TGFs detected during the period March 2009 - July 2012 in the +/- 2.5° latitude band and selected to have the maximum photon energy up to 30 MeV. The characteristics of the AGILE events are analysed and compared to the observational framework established by the two other currently active missions capable of detecting TGFs from space, RHESSI and Fermi. A detailed model of the MCAL dead time is presented, which is fundamental to properly interpret our observations, particularly concerning duration, intensity and correlation with lightning sferics detected by the World Wide Lightning Location Network. The TGFs cumulative spectrum supports a low production altitude, in agreement with previous measurements. The AGILE TGF catalog below 30 MeV is publicly accessible online at the website of the ASI Science Data Center (ASDC) http://www.asdc.asi.it/mcaltgfcat/ In addition to the TGF sample properties we also present the catalog website functionalities available to users.

  13. Properties of terrestrial gamma ray flashes detected by AGILE MCAL below 30 MeV

    NASA Astrophysics Data System (ADS)

    Marisaldi, M.; Fuschino, F.; Tavani, M.; Dietrich, S.; Price, C.; Galli, M.; Pittori, C.; Verrecchia, F.; Mereghetti, S.; Cattaneo, P. W.; Colafrancesco, S.; Argan, A.; Labanti, C.; Longo, F.; Del Monte, E.; Barbiellini, G.; Giuliani, A.; Bulgarelli, A.; Campana, R.; Chen, A.; Gianotti, F.; Giommi, P.; Lazzarotto, F.; Morselli, A.; Rapisarda, M.; Rappoldi, A.; Trifoglio, M.; Trois, A.; Vercellone, S.

    2014-02-01

    We present the characteristics of 308 terrestrial gamma ray flashes (TGFs) detected by the Minicalorimeter (MCAL) instrument on board the AGILE satellite during the period March 2009-July 2012 in the ±2.5° latitude band and selected to have the maximum photon energy up to 30 MeV. The characteristics of the AGILE events are analyzed and compared to the observational framework established by the two other currently active missions capable of detecting TGFs from space, RHESSI and Fermi. A detailed model of the MCAL dead time is presented, which is fundamental to properly interpret our observations. The most significant contribution to dead time is due to the anticoincidence shield in its current configuration and not to the MCAL detector itself. Longitude and local time distributions are compatible with previous observations, while the duration distribution is biased toward longer values because of dead time. The intensity distribution is compatible with previous observations, when dead time is taken into account. The TGFs cumulative spectrum supports a low production altitude, in agreement with previous measurements. We also compare our sample to lightning sferics detected by the World Wide Lightning Location Network and suggest a new method to assess quantitatively the consistency of two TGF populations based on the comparison of the associated lightning activity. According to this method, AGILE and RHESSI samples are compatible with the same parent population. The AGILE TGF catalog below 30 MeV is accessible online at the website of the ASI Science Data Center http://www.asdc.asi.it/mcaltgfcat/.

  14. Traumatic andropause after combat injury.

    PubMed

    Jones, Gareth Huw; Kirkman-Brown, Jackson; Sharma, Davendra Murray; Bowley, Douglas

    2015-01-01

    In association with lower extremity amputation, complex genitourinary injuries have emerged as a specific challenge in modern military trauma surgery. Testicular injury or loss has profound implications for the recovering serviceman, in terms of hormone production and future fertility. The initial focus of treatment for patients with traumatic testicular loss is haemostasis, resuscitation and management of concurrent life-threatening injuries. Multiple reoperations are commonly required to control infection in combat wounds; in a review of 300 major lower extremity amputations, 53% of limbs required revisional surgery, with infection the commonest indication. Atypical infections, such as invasive fungal organisms, can also complicate military wounding. We report the case of a severely wounded serviceman with complete traumatic andropause, whose symptomatic temperature swings were initially mistaken for signs of occult sepsis. PMID:26318170

  15. Blended Training for Combat Medics

    NASA Technical Reports Server (NTRS)

    Fowlkes, Jennifer; Dickinson, Sandra; Lazarus, Todd

    2010-01-01

    Bleeding from extremity wounds is the number one cause of preventable death on the battlefield and current research stresses the importance of training in preparing every Soldier to use tourniquets. HapMed is designed to provide tourniquet application training to combat medics and Soldiers using a blended training solution encompassing information, demonstration, practice, and feedback. The system combines an instrumented manikin arm, PDA, and computer. The manikin arm provides several training options including stand-alone, hands-on skills training in which soldiers can experience the actual torque required to staunch bleeding from an extremity wound and be timed on tourniquet application. This is more realistic than using a block of wood to act as a limb, which is often how training is conducted today. Combining the manikin arm with the PDA allows instructors to provide scenario based training. In a classroom or field setting, an instructor can specify wound variables such as location, casualty size, and whether the wound is a tough bleed. The PDA also allows more detailed feedback to be provided. Finally, combining the manikin arm with game-based technologies, the third component, provides opportunities to build knowledge and to practice battlefield decision making. Not only do soldiers learn how to apply a tourniquet, but when to apply a tourniquet in combat. The purpose of the paper is to describe the learning science underlying the design of HapMed, illustrate the training system and ways it is being expanded to encompass other critical life-saving tasks, and report on feedback received from instructors and trainees at military training and simulation centers.

  16. The impact of flying qualities on helicopter operational agility

    NASA Technical Reports Server (NTRS)

    Padfield, Gareth D.; Lappos, Nick; Hodgkinson, John

    1993-01-01

    Flying qualities standards are formally set to ensure safe flight and therefore reflect minimum, rather than optimum, requirements. Agility is a flying quality but relates to operations at high, if not maximum, performance. While the quality metrics and test procedures for flying, as covered for example in ADS33C, may provide an adequate structure to encompass agility, they do not currently address flight at high performance. This is also true in the fixed-wing world and a current concern in both communities is the absence of substantiated agility criteria and possible conflicts between flying qualities and high performance. AGARD is sponsoring a working group (WG19) title 'Operational Agility' that deals with these and a range of related issues. This paper is condensed from contributions by the three authors to WG19, relating to flying qualities. Novel perspectives on the subject are presented including the agility factor, that quantifies performance margins in flying qualities terms; a new parameter, based on maneuver acceleration is introduced as a potential candidate for defining upper limits to flying qualities. Finally, a probabilistic analysis of pilot handling qualities ratings is presented that suggests a powerful relationship between inherent airframe flying qualities and operational agility.

  17. Function-based integration strategy for an agile manufacturing testbed

    NASA Astrophysics Data System (ADS)

    Park, Hisup

    1997-01-01

    This paper describes an integration strategy for plug-and- play software based on functional descriptions of the software modules. The functional descriptions identify explicitly the role of each module with respect to the overall systems. They define the critical dependencies that affect the individual modules and thus affect the behavior of the system. The specified roles, dependencies and behavioral constraints are then incorporated in a group of shared objects that are distributed over a network. These objects may be interchanged with others without disrupting the system so long as the replacements meet the interface and functional requirements. In this paper, we propose a framework for modeling the behavior of plug-and-play software modules that will be used to (1) design and predict the outcome of the integration, (2) generate the interface and functional requirements of individual modules, and (3) form a dynamic foundation for applying interchangeable software modules. I describe this strategy in the context of the development of an agile manufacturing testbed. The testbed represents a collection of production cells for machining operations, supported by a network of software modules or agents for planning, fabrication, and inspection. A process definition layer holds the functional description of the software modules. A network of distributed objects interact with one another over the Internet and comprise the plug-compatible software nodes that execute these functions. This paper will explore the technical and operational ramifications of using the functional description framework to organize and coordinate the distributed object modules.

  18. Flight comparison of the transonic agility of the F-111A airplane and the F-111 supercritical wing airplane

    NASA Technical Reports Server (NTRS)

    Friend, E. L.; Sakamoto, G. M.

    1978-01-01

    A flight research program was conducted to investigate the improvements in maneuverability of an F-111A airplane equipped with a supercritical wing. In this configuration the aircraft is known as the F-111 TACT (transonic aircraft technology) airplane. The variable-wing-sweep feature permitted an evaluation of the supercritical wing in many configurations. The primary emphasis was placed on the transonic Mach number region, which is considered to be the principal air combat arena for fighter aircraft. An agility study was undertaken to assess the maneuverability of the F-111A aircraft with a supercritical wing at both design and off-design conditions. The evaluation included an assessment of aerodynamic and maneuver performance in conjunction with an evaluation of precision controllability during tailchase gunsight tracking tasks.

  19. APID: Agile Protein Interaction DataAnalyzer.

    PubMed

    Prieto, Carlos; De Las Rivas, Javier

    2006-07-01

    Agile Protein Interaction DataAnalyzer (APID) is an interactive bioinformatics web tool developed to integrate and analyze in a unified and comparative platform main currently known information about protein-protein interactions demonstrated by specific small-scale or large-scale experimental methods. At present, the application includes information coming from five main source databases enclosing an unified sever to explore >35 000 different proteins and 111 000 different proven interactions. The web includes search tools to query and browse upon the data, allowing selection of the interaction pairs based in calculated parameters that weight and qualify the reliability of each given protein interaction. Such parameters are for the 'proteins': connectivity, cluster coefficient, Gene Ontology (GO) functional environment, GO environment enrichment; and for the 'interactions': number of methods, GO overlapping, iPfam domain-domain interaction. APID also includes a graphic interactive tool to visualize selected sub-networks and to navigate on them or along the whole interaction network. The application is available open access at http://bioinfow.dep.usal.es/apid/. PMID:16845013

  20. Frequency-agile, rapid scanning spectroscopy

    NASA Astrophysics Data System (ADS)

    Truong, G.-W.; Douglass, K. O.; Maxwell, S. E.; van Zee, R. D.; Plusquellic, D. F.; Hodges, J. T.; Long, D. A.

    2013-07-01

    Challenging applications in trace gas measurements require low uncertainty and high acquisition rates. Many cavity-enhanced spectroscopies exhibit significant sensitivity and potential, but their scanning rates are limited by reliance on either mechanical or thermal frequency tuning. Here, we present frequency-agile, rapid scanning spectroscopy (FARS) in which a high-bandwidth electro-optic modulator steps a selected laser sideband to successive optical cavity modes. This approach involves no mechanical motion and allows for a scanning rate of 8 kHz per cavity mode, a rate that is limited only by the cavity response time itself. Unlike rapidly frequency-swept techniques, FARS does not reduce the measurement duty cycle, degrade the spectrum's frequency axis or require an unusual cavity configuration. FARS allows for a sensitivity of ~2 × 10-12 cm-1 Hz-1/2 and a tuning range exceeding 70 GHz. This technique shows promise for fast and sensitive trace gas measurements and studies of chemical kinetics.

  1. Frequency-agile dual-comb spectroscopy

    NASA Astrophysics Data System (ADS)

    Millot, Guy; Pitois, Stéphane; Yan, Ming; Hovhannisyan, Tatevik; Bendahmane, Abdelkrim; Hänsch, Theodor W.; Picqué, Nathalie

    2016-01-01

    Spectroscopic gas sensing and its applications to, for example, trace detection or chemical kinetics, require ever more demanding measurement times, acquisition rates, sensitivities, precisions and broad tuning ranges. Here, we propose a new approach to near-infrared molecular spectroscopy, utilizing advanced concepts of optical telecommunications and supercontinuum photonics. We generate, without mode-locked lasers, two frequency combs of slightly different repetition frequencies and moderate, but rapidly tunable, spectral span. The output of a frequency-agile continuous-wave laser is split and sent into two electro-optic intensity modulators. Flat-top low-noise frequency combs are produced by wave-breaking in a nonlinear optical fibre of normal dispersion. With a dual-comb spectrometer, we record Doppler-limited spectra spanning 60 GHz within 13 μs and an 80 kHz refresh rate, at a tuning speed of 10 nm s-1. The sensitivity for weak absorption is enhanced by a long gas-filled hollow-core fibre. New opportunities for real-time diagnostics may be opened up, even outside the laboratory.

  2. Agile robotic edge finishing system research

    SciTech Connect

    Powell, M.A.

    1995-07-01

    This paper describes a new project undertaken by Sandia National Laboratories to develop an agile, automated, high-precision edge finishing system. The project has a two-year duration and was initiated in October, 1994. This project involves re-designing and adding additional capabilities to an existing finishing workcell at Sandia; and developing intelligent methods for automating process definition and for controlling finishing processes. The resulting system will serve as a prototype for systems that will be deployed into highly flexible automated production lines. The production systems will be used to produce a wide variety of products with limited production quantities and quick turnaround requirements. The prototype system is designed to allow programming, process definition, fixture re-configuration, and process verification to be performed off-line for new products. CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) models of the part will be used to assist with the automated process development and process control tasks. To achieve Sandia`s performance goals, the system will be employ advanced path planning, burr prediction expert systems, automated process definition, statistical process models in a process database, and a two-level control scheme using hybrid position-force control and fuzzy logic control. In this paper, we discuss the progress and the planned system development under this project.

  3. Distributed agile software development for the SKA

    NASA Astrophysics Data System (ADS)

    Wicenec, Andreas; Parsons, Rebecca; Kitaeff, Slava; Vinsen, Kevin; Wu, Chen; Nelson, Paul; Reed, David

    2012-09-01

    The SKA software will most probably be developed by many groups distributed across the globe and coming from dierent backgrounds, like industries and research institutions. The SKA software subsystems will have to cover a very wide range of dierent areas, but still they have to react and work together like a single system to achieve the scientic goals and satisfy the challenging data ow requirements. Designing and developing such a system in a distributed fashion requires proper tools and the setup of an environment to allow for ecient detection and tracking of interface and integration issues in particular in a timely way. Agile development can provide much faster feedback mechanisms and also much tighter collaboration between the customer (scientist) and the developer. Continuous integration and continuous deployment on the other hand can provide much faster feedback of integration issues from the system level to the subsystem developers. This paper describes the results obtained from trialing a potential SKA development environment based on existing science software development processes like ALMA, the expected distribution of the groups potentially involved in the SKA development and experience gained in the development of large scale commercial software projects.

  4. Parallel optimization methods for agile manufacturing

    SciTech Connect

    Meza, J.C.; Moen, C.D.; Plantenga, T.D.; Spence, P.A.; Tong, C.H.; Hendrickson, B.A.; Leland, R.W.; Reese, G.M.

    1997-08-01

    The rapid and optimal design of new goods is essential for meeting national objectives in advanced manufacturing. Currently almost all manufacturing procedures involve the determination of some optimal design parameters. This process is iterative in nature and because it is usually done manually it can be expensive and time consuming. This report describes the results of an LDRD, the goal of which was to develop optimization algorithms and software tools that will enable automated design thereby allowing for agile manufacturing. Although the design processes vary across industries, many of the mathematical characteristics of the problems are the same, including large-scale, noisy, and non-differentiable functions with nonlinear constraints. This report describes the development of a common set of optimization tools using object-oriented programming techniques that can be applied to these types of problems. The authors give examples of several applications that are representative of design problems including an inverse scattering problem, a vibration isolation problem, a system identification problem for the correlation of finite element models with test data and the control of a chemical vapor deposition reactor furnace. Because the function evaluations are computationally expensive, they emphasize algorithms that can be adapted to parallel computers.

  5. Development of perceived competence, tactical skills, motivation, technical skills, and speed and agility in young soccer players.

    PubMed

    Forsman, Hannele; Gråstén, Arto; Blomqvist, Minna; Davids, Keith; Liukkonen, Jarmo; Konttinen, Niilo

    2016-07-01

    The objective of this 1-year, longitudinal study was to examine the development of perceived competence, tactical skills, motivation, technical skills, and speed and agility characteristics of young Finnish soccer players. We also examined associations between latent growth models of perceived competence and other recorded variables. Participants were 288 competitive male soccer players ranging from 12 to 14 years (12.7 ± 0.6) from 16 soccer clubs. Players completed the self-assessments of perceived competence, tactical skills, and motivation, and participated in technical, and speed and agility tests. Results of this study showed that players' levels of perceived competence, tactical skills, motivation, technical skills, and speed and agility characteristics remained relatively high and stable across the period of 1 year. Positive relationships were found between these levels and changes in perceived competence and motivation, and levels of perceived competence and speed and agility characteristics. Together these results illustrate the multi-dimensional nature of talent development processes in soccer. Moreover, it seems crucial in coaching to support the development of perceived competence and motivation in young soccer players and that it might be even more important in later maturing players. PMID:26708723

  6. The agile alert system for gamma-ray transients

    SciTech Connect

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Fioretti, V.; Chen, A. W.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Santolamazza, P.; Fanari, G.; Giommi, P.; Pellizzoni, A.; and others

    2014-01-20

    In recent years, a new generation of space missions has offered great opportunities for discovery in high-energy astrophysics. In this article we focus on the scientific operations of the Gamma-Ray Imaging Detector (GRID) on board the AGILE space mission. AGILE-GRID, sensitive in the energy range of 30 MeV-30 GeV, has detected many γ-ray transients of both galactic and extragalactic origin. This work presents the AGILE innovative approach to fast γ-ray transient detection, which is a challenging task and a crucial part of the AGILE scientific program. The goals are to describe (1) the AGILE Gamma-Ray Alert System, (2) a new algorithm for blind search identification of transients within a short processing time, (3) the AGILE procedure for γ-ray transient alert management, and (4) the likelihood of ratio tests that are necessary to evaluate the post-trial statistical significance of the results. Special algorithms and an optimized sequence of tasks are necessary to reach our goal. Data are automatically analyzed at every orbital downlink by an alert pipeline operating on different timescales. As proper flux thresholds are exceeded, alerts are automatically generated and sent as SMS messages to cellular telephones, via e-mail, and via push notifications from an application for smartphones and tablets. These alerts are crosschecked with the results of two pipelines, and a manual analysis is performed. Being a small scientific-class mission, AGILE is characterized by optimization of both scientific analysis and ground-segment resources. The system is capable of generating alerts within two to three hours of a data downlink, an unprecedented reaction time in γ-ray astrophysics.

  7. The AGILE Alert System for Gamma-Ray Transients

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Tavani, M.; Parmiggiani, N.; Fioretti, V.; Chen, A. W.; Vercellone, S.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Santolamazza, P.; Fanari, G.; Giommi, P.; Beneventano, D.; Argan, A.; Trois, A.; Scalise, E.; Longo, F.; Pellizzoni, A.; Pucella, G.; Colafrancesco, S.; Conforti, V.; Tempesta, P.; Cerone, M.; Sabatini, P.; Annoni, G.; Valentini, G.; Salotti, L.

    2014-01-01

    In recent years, a new generation of space missions has offered great opportunities for discovery in high-energy astrophysics. In this article we focus on the scientific operations of the Gamma-Ray Imaging Detector (GRID) on board the AGILE space mission. AGILE-GRID, sensitive in the energy range of 30 MeV-30 GeV, has detected many γ-ray transients of both galactic and extragalactic origin. This work presents the AGILE innovative approach to fast γ-ray transient detection, which is a challenging task and a crucial part of the AGILE scientific program. The goals are to describe (1) the AGILE Gamma-Ray Alert System, (2) a new algorithm for blind search identification of transients within a short processing time, (3) the AGILE procedure for γ-ray transient alert management, and (4) the likelihood of ratio tests that are necessary to evaluate the post-trial statistical significance of the results. Special algorithms and an optimized sequence of tasks are necessary to reach our goal. Data are automatically analyzed at every orbital downlink by an alert pipeline operating on different timescales. As proper flux thresholds are exceeded, alerts are automatically generated and sent as SMS messages to cellular telephones, via e-mail, and via push notifications from an application for smartphones and tablets. These alerts are crosschecked with the results of two pipelines, and a manual analysis is performed. Being a small scientific-class mission, AGILE is characterized by optimization of both scientific analysis and ground-segment resources. The system is capable of generating alerts within two to three hours of a data downlink, an unprecedented reaction time in γ-ray astrophysics.

  8. Treating traumatic bleeding in a combat setting.

    PubMed

    Clifford, C Cloonan

    2004-12-01

    Bleeding is clearly a major cause of morbidity and death after trauma. When bleeding is attributable to transection of major vessels, surgical repair is appropriate. Posttraumatic microvascular bleeding attributable to coagulopathy secondary to metabolic derangements, hypothermia, and depletion or dysfunction of cellular and protein components requires a different approach. Although transfusion of blood products may be necessary to replace the blood loss, it does not always correct the problem of microvascular bleeding. The type of injury, mode of care, and treatment objectives differ significantly for combat-wounded soldiers versus civilian trauma patients. Although hemorrhage is responsible for 50% of combat deaths, published information about coagulation monitoring among combat patients is very limited. These articles summarize the appropriate monitoring of hemostasis among combat trauma patients, review the unique nature of combat casualties and the medical system used to treat them, and discuss information available from civilian studies. Because the development of coagulopathy is relatively infrequent in the young, otherwise healthy, military population, the routine screening measures currently used are adequate to guide initial blood product administration. However, as new intravenous hemostatic agents are used for these patients, better laboratory measures will be required. Although hemorrhage is the leading cause of death for combat casualties, catastrophic hemorrhage is rarely a prehospital combat medical management problem because, when it occurs, it tends to cause death before medical care can be provided. In civilian environments, most seriously injured victims can be reached and transported by emergency medical services personnel within minutes; in combat, it often takes hours simply to transport casualties off the battlefield. In combat situations, even if the transport distances are small, the hazardous nature of the forward combat areas frequently

  9. Monitoring of hemostasis in combat trauma patients.

    PubMed

    Carr, Marcus E

    2004-12-01

    Bleeding is clearly a major cause of morbidity and death after trauma. When bleeding is attributable to transection of major vessels, surgical repair is appropriate. Posttraumatic microvascular bleeding attributable to coagulopathy secondary to metabolic derangements, hypothermia, and depletion or dysfunction of cellular and protein components requires a different approach. Although transfusion of blood products may be necessary to replace the blood loss, it does not always correct the problem of microvascular bleeding. The type of injury, mode of care, and treatment objectives differ significantly for combat-wounded soldiers versus civilian trauma patients. Although hemorrhage is responsible for 50% of combat deaths, published information about coagulation monitoring among combat patients is very limited. These articles summarize the appropriate monitoring of hemostasis among combat trauma patients, review the unique nature of combat casualties and the medical system used to treat them, and discuss information available from civilian studies. Because the development of coagulopathy is relatively infrequent in the young, otherwise healthy, military population, the routine screening measures currently used are adequate to guide initial blood product administration. However, as new intravenous hemostatic agents are used for these patients, better laboratory measures will be required. Although hemorrhage is the leading cause of death for combat casualties, catastrophic hemorrhage is rarely a prehospital combat medical management problem because, when it occurs, it tends to cause death before medical care can be provided. In civilian environments, most seriously injured victims can be reached and transported by emergency medical services personnel within minutes; in combat, it often takes hours simply to transport casualties off the battlefield. In combat situations, even if the transport distances are small, the hazardous nature of the forward combat areas frequently

  10. Simulation Of Combat With An Expert System

    NASA Technical Reports Server (NTRS)

    Provenzano, J. P.

    1989-01-01

    Proposed expert system predicts outcomes of combat situations. Called "COBRA", combat outcome based on rules for attrition, system selects rules for mathematical modeling of losses and discrete events in combat according to previous experiences. Used with another software module known as the "Game". Game/COBRA software system, consisting of Game and COBRA modules, provides for both quantitative aspects and qualitative aspects in simulations of battles. COBRA intended for simulation of large-scale military exercises, concepts embodied in it have much broader applicability. In industrial research, knowledge-based system enables qualitative as well as quantitative simulations.

  11. Developmental flight test in combat (Joint STARS at war)

    SciTech Connect

    Muellner, G.K.; Cusimano, G.J. USAF, Electronic Systems Div., Melbourne, FL )

    1992-02-01

    The Joint Surveillance Target Attack Radar System (Joint STARS), which employs a refurbished 707 commercial airframe as its platform and is intended to furnish AWACS-like real-time battlefield intelligence to ground operations, first flew on January 14, 1991, in support of Operation Desert Shield. Attention is presently given to Joint STARS' developmental and testing activity, with emphasis on the cycle-development and testing that occurred in Saudi Arabia and on Desert Storm combat-mission support experience gained with the system. Basic ECCM and the Joint Tactical Information Distribution System are incorporated by Joint STARS.

  12. Understanding combat casualty care statistics.

    PubMed

    Holcomb, John B; Stansbury, Lynn G; Champion, Howard R; Wade, Charles; Bellamy, Ronald F

    2006-02-01

    Maintaining good hospital records during military conflicts can provide medical personnel and researchers with feedback to rapidly adjust treatment strategies and improve outcomes. But to convert the resulting raw data into meaningful conclusions requires clear terminology and well thought out equations, utilizing consistent numerators and denominators. Our objective was to arrive at terminology and equations that would produce the best insight into the effectiveness of care at different stages of treatment, either pre or post medical treatment facility care. We first clarified three essential terms: 1) the case fatality rate (CFR) as percentage of fatalities among all wounded; 2) killed in action (KIA) as percentage of immediate deaths among all seriously injured (not returning to duty); and 3) died of wounds (DOW) as percentage of deaths following admission to a medical treatment facility among all seriously injured (not returning to duty). These equations were then applied consistently across data from the WWII, Vietnam and the current Global War on Terrorism. Using this clear set of definitions we used the equations to ask two basic questions: What is the overall lethality of the battlefield? How effective is combat casualty care? To answer these questions with current data, the three services have collaboratively created a joint theater trauma registry (JTTR), cataloging all the serious injuries, procedures, and outcomes for the current war. These definitions and equations, consistently applied to the JTTR, will allow meaningful comparisons and help direct future research and appropriate application of personnel. PMID:16508502

  13. Development of exposure to combat severity scale of the combat experiences questionnaire (CEQ).

    PubMed

    Carvalho, Teresa; Pinto-Gouveia, José; Cunha, Marina; da Motta, Carolina

    2014-12-01

    Combat exposure is detrimental to physical and mental health, and is an important risk factor for Post-traumatic Stress Disorder (PTSD). The current study aimed to develop the first section of a self-report measure (Combat Experiences Questionnaire - CEQ), and to explore its psychometric properties on Portuguese Overseas War Veterans. The Exposure to Combat Severity Scale (CEQ A), assesses the exposure severity to objective scenarios related to military combat, common to contemporary and older theaters of operations. Studies included structural analysis through Rash Model, internal consistency, convergent validity (n=708), temporal reliability (n=112) and sensibility to differentiate war Veterans with and without war-related PTSD (N=40 and N=47, respectively). The scale's structure presented adequate fit to the data, adequate psychometric properties, and discriminant validity. Thus, the CEQ A is a valid and reliable tool presenting diverse combat scenarios to assess severity of combat exposure in war Veterans. PMID:25445084

  14. Exposure to recurrent combat stress: combat stress reactions among Israeli soldiers in the Lebanon War.

    PubMed

    Solomon, Z; Mikulincer, M; Jakob, B R

    1987-05-01

    This study examined the impact of repeated exposure to combat on combat stress reaction (CSR). Soldiers diagnosed with CSR during the Lebanon War (N = 382) were compared with a matched control group of soldiers who fought in the same units but did not manifest symptoms of CSR (N = 334). CSR in the Lebanon War was found to be related to the psychological outcome the soldier experienced in previous wars. The CSR rate in the Lebanon War was higher in soldiers who had experienced an episode of CSR in a previous war than in soldiers with no past combat experience. However, CSR rates were lower among soldiers who had not had an episode of CSR in a previous war than among soldiers with no prior combat experience. High intensity of combat in Lebanon was found to increase both the detrimental and favourable effects of prior combat experience. PMID:3602235

  15. Effects of wearing protective chemical warfare-combat clothing on human performance. Final report, Sep 89-Aug 91

    SciTech Connect

    Taylor, H.L.; Orlansky, J.

    1991-08-01

    U.S. Department of Defense studies to measure performance decrements associated with wearing chemical warfare (CW) protective combat clothing indicate that heat stress produced seriously degraded human performance. Even when heat stress is not a significant factor, performance of many combat, combat support, and combat service support tasks is degraded. In most field studies, many crews of combat units became operationally ineffective due to voluntary withdrawal of individual crew members. Many combined arms, field studies, and laboratory studies indicate that when CW-protective combat clothing is worn performance is seriously degraded for (1) the detection of targets, engagement time, accuracy of fire, and (2) manual dexterity tasks; and that (3) a variety of psychological effects are created. Further, the degree of performance degradation varied with the tasks performed. Training in CW-protective combat clothing permits learning to modify procedures and consequently reduce negative effects, provided heat stress is not a significant factor. A growing body of evidence indicates there is inadequate training in the use of CW-protective combat clothing. A critical need exists for more and better training of skills needed under CW conditions.

  16. The Frequency Agile Solar Radiotelescope (FASR)

    NASA Astrophysics Data System (ADS)

    White, S. M.; Gary, D. E.; Bastian, T. S.; Hurford, G. J.; Lanzerotti, L. J.

    2003-04-01

    The Frequency Agile Solar Radiotelescope (FASR) is a radio interferometer designed to make high spatial resolution images of the Sun across a broad range of radio wavelengths simultaneously, allowing the technique of imaging spectroscopy to be exploited on a routine basis. The telescope will cover the frequency range 0.1-30 GHz using several sets of receiving elements that provide full-disk imaging, with of order 100 antennas at highest frequency range. FASR will be optimized for solar radio phenomena and will be the most powerful and versatile radioheliograph ever built, providing an improvement of orders of magnitude in image quality over existing instruments. FASR recently received the top ranking amongst all small projects considered by the decadal survey of the National Academy of Science Committee on Solar and Space Physics. FASR will probe all phenomena in the solar atmosphere from the mid-chromosphere outwards. In particular, FASR will provide direct measurement of coronal magnetic field strengths, will image the nonthermal solar atmosphere and show directly the locations of electrons accelerated by solar flares, will provide images of coronal mass ejections travelling outwwards through the solar corona, and supply extensive data products for forecasting and synoptic studies. A major emphasis in the project is to make FASR data as widely and easily used as possible, i.e., providing the general user with processed, fully-calibrated high-quality images that do not need particular knowledge of radio astronomy for interpretation. This paper will describe the telescope and its science goals, and summarize its current status.

  17. The Southern Argentine Agile Meteor Radar (SAAMER)

    NASA Astrophysics Data System (ADS)

    Janches, Diego

    2014-11-01

    The Southern Argentina Agile Meteor Radar (SAAMER) is a new generation system deployed in Rio Grande, Tierra del Fuego, Argentina (53 S) in May 2008. SAAMER transmits 10 times more power than regular meteor radars, and uses a newly developed transmitting array, which focuses power upward instead of the traditional single-antenna-all-sky configuration. The system is configured such that the transmitter array can also be utilized as a receiver. The new design greatly increases the sensitivity of the radar enabling the detection of large number of particles at low zenith angles. The more concentrated transmitted power enables additional meteor studies besides those typical of these systems based on the detection of specular reflections, such as routine detections of head echoes and non-specular trails, previously only possible with High Power and Large Aperture radars. In August 2010, SAAMER was upgraded to a system capable to determine meteoroid orbital parameters. This was achieved by adding two remote receiving stations approximately 10 km away from the main site in near perpendicular directions. The upgrade significantly expands the science that is achieved with this new radar enabling us to study the orbital properties of the interplanetary dust environment. Because of the unique geographical location, SAAMER allows for additional inter-hemispheric comparison with measurements from Canadian Meteor Orbit Radar, which is geographically conjugate. Initial surveys show, for example, that SAAMER observes a very strong contribution of the South Toroidal Sporadic meteor source, of which limited observational data is available. In addition, SAAMER offers similar unique capabilities for meteor showers and streams studies given the range of ecliptic latitudes that the system enables detailed study of showers at high southern latitudes (e.g July Phoenicids or Puppids complex). Finally, SAAMER is ideal for the deployment of complementary instrumentation in both, permanent

  18. Array Databases: Agile Analytics (not just) for the Earth Sciences

    NASA Astrophysics Data System (ADS)

    Baumann, P.; Misev, D.

    2015-12-01

    Gridded data, such as images, image timeseries, and climate datacubes, today are managed separately from the metadata, and with different, restricted retrieval capabilities. While databases are good at metadata modelled in tables, XML hierarchies, or RDF graphs, they traditionally do not support multi-dimensional arrays.This gap is being closed by Array Databases, pioneered by the scalable rasdaman ("raster data manager") array engine. Its declarative query language, rasql, extends SQL with array operators which are optimized and parallelized on server side. Installations can easily be mashed up securely, thereby enabling large-scale location-transparent query processing in federations. Domain experts value the integration with their commonly used tools leading to a quick learning curve.Earth, Space, and Life sciences, but also Social sciences as well as business have massive amounts of data and complex analysis challenges that are answered by rasdaman. As of today, rasdaman is mature and in operational use on hundreds of Terabytes of timeseries datacubes, with transparent query distribution across more than 1,000 nodes. Additionally, its concepts have shaped international Big Data standards in the field, including the forthcoming array extension to ISO SQL, many of which are supported by both open-source and commercial systems meantime. In the geo field, rasdaman is reference implementation for the Open Geospatial Consortium (OGC) Big Data standard, WCS, now also under adoption by ISO. Further, rasdaman is in the final stage of OSGeo incubation.In this contribution we present array queries a la rasdaman, describe the architecture and novel optimization and parallelization techniques introduced in 2015, and put this in context of the intercontinental EarthServer initiative which utilizes rasdaman for enabling agile analytics on Petascale datacubes.

  19. Doctors Issue Call to Combat Climate Change

    MedlinePlus

    ... fullstory_158362.html Doctors Issue Call to Combat Climate Change They say respiratory illnesses, heat stroke and ... 18, 2016 MONDAY, April 18, 2016 (HealthDay News) -- Climate change is already harming people's health by promoting ...

  20. Traumatic stress: a personal view from combat.

    PubMed

    Jaehne, R L

    2001-01-01

    What follows is my personal account of the effects of traumatic stress disorder as it is caused by the effects of combat. I tell it in the first person because it is the most effective way to emphasize the highly personal, traumatic nature of combat stress and because it is my own story. I have endeavored to explain how combat stress occurs, what happens to the individual as a result and how a person can recover from its effects. I offer my story because I think that there are thousands of men who have been in offensive combat, who may have lived my life, but who have not had the opportunity to tell their story about why they hurt. PMID:11642197

  1. Doctors Issue Call to Combat Climate Change

    MedlinePlus

    ... fullstory_158362.html Doctors Issue Call to Combat Climate Change They say respiratory illnesses, heat stroke and infectious ... 18, 2016 MONDAY, April 18, 2016 (HealthDay News) -- Climate change is already harming people's health by promoting illnesses ...

  2. Analysis of a combat problem - The turret game

    NASA Technical Reports Server (NTRS)

    Ardema, M.; Heymann, M.; Rajan, N.

    1987-01-01

    The turret game is defined and solved to illustrate the nature of games of combat. This game represents a highly simplified version of air combat, yet it is sufficiently complex so as to exhibit a rich variety of combat phenomena. A review of the formulation of delta-combat games is included.

  3. Infrared and visible combat identification marking materials

    NASA Astrophysics Data System (ADS)

    O'Keefe, Eoin; Shohet, Adam; Swan, Martin

    2007-04-01

    Historically, it is believed that fratricide accounts for up to 15% of friendly casualties during operations and a UK MoD report identifies that almost half of all such casualties occur in situations involving ground units only. Such risks can be mitigated, to an extent, via operational awareness and effective communications. However, recent conflicts have involved a much more dynamic, complex and technically sophisticated battlefield than previously experienced. For example, Operation Telic (Desert Storm) involved almost one million combatants and ten thousand armoured vehicles in the coalition force, advancing across an extensive battlefront at high speed during daylight and at night, making effective use of a range of electro-optic sensors. The accelerated tempo of battle means that front lines can undergo rapid, punctuated advances that can leave individual combat units with a much degraded situational awareness, particularly of where they are in relation to other 'friendly' combatants. Consequently, there is a need for a robust, low cost, low weight, compact, unpowered, interoperable, Combat Identification technique for use with popular electro-optic sensors which can be deployed, and is effective, at the individual combat unit level. In this paper we discuss ground-to-ground combat identification materials that meet these requirements, all of which are based on the air-to-ground Mirage TM vehicle marking material. We show some preliminary ground-to-ground data collected from the new variant Mirage TM material in recent experimental trials conducted during the day, evening and at night.

  4. Male combat veterans' narratives of PTSD, masculinity, and health.

    PubMed

    Caddick, Nick; Smith, Brett; Phoenix, Cassandra

    2015-01-01

    This article uniquely examines the ways a group of male combat veterans talk about masculinity and how, following post-traumatic stress disorder (PTSD), they performed masculinities in the context of a surfing group, and what effects this had upon their health and wellbeing. Participant observations and life history interviews were conducted with a group of combat veterans who belonged to a surfing charity for veterans experiencing PTSD. Data were rigorously explored via narrative analysis. Our findings revealed the ways in which veterans enacted masculinities in accordance with the values that were cultivated during military service. These masculine performances in the surfing group had important effects both on and for the veterans' wellbeing. Significantly, the study highlights how masculine performances can be seen alternately as a danger and as a resource for health and wellbeing in relation to PTSD. The article advances knowledge on combat veterans and mental health with critical implications for the promotion of male veterans' mental health. These include the original suggestion that health-promoting masculine performances might be recognised and supported in PTSD treatment settings. Rather than automatically viewing masculinity as problematic, this article moves the field forward by highlighting how hegemonic masculinities can be reconstructed in positive ways which might improve veterans' health and wellbeing. A video abstract of this article can be found at: https://www.youtube.com/watch?v=BaYzaOP1kAY. PMID:25601067

  5. Comparison of conventional and microlens-array agile beam steerers

    NASA Astrophysics Data System (ADS)

    McDearmon, Graham F.; Flood, Kevin M.; Finlan, J. Michael

    1995-05-01

    We analyzed the optical and mechanical performance of several designs of agile beam steerers based on refractive microlens arrays for sensing and imaging applications in the visible and infrared wavebands. Ray-trace analyses showed that the best design is capable of steering narrowband illumination +/- 25 degree(s) in two dimensions with nearly diffraction-limited performance. The maximum steering angle depends on the materials. We found that imaging the field of regard takes significantly more time than scanning it unless cameras with very high frame-rates are used. We performed many parametric studies that can be used to optimize the design for any application. We compared optimal designs for microlens-array and conventional galvanometric agile beam steerers. The microlens-array agile beam steerer provides significant improvements in scanning speed, random access pointing, energy consumption, mass reduction, and volume reduction.

  6. Development of a Computer Program for Analyzing Preliminary Aircraft Configurations in Relationship to Emerging Agility Metrics

    NASA Technical Reports Server (NTRS)

    Bauer, Brent

    1993-01-01

    This paper discusses the development of a FORTRAN computer code to perform agility analysis on aircraft configurations. This code is to be part of the NASA-Ames ACSYNT (AirCraft SYNThesis) design code. This paper begins with a discussion of contemporary agility research in the aircraft industry and a survey of a few agility metrics. The methodology, techniques and models developed for the code are then presented. Finally, example trade studies using the agility module along with ACSYNT are illustrated. These trade studies were conducted using a Northrop F-20 Tigershark aircraft model. The studies show that the agility module is effective in analyzing the influence of common parameters such as thrust-to-weight ratio and wing loading on agility criteria. The module can compare the agility potential between different configurations. In addition, one study illustrates the module's ability to optimize a configuration's agility performance.

  7. Analysis and optimization of preliminary aircraft configurations in relationship to emerging agility metrics

    NASA Technical Reports Server (NTRS)

    Sandlin, Doral R.; Bauer, Brent Alan

    1993-01-01

    This paper discusses the development of a FORTRAN computer code to perform agility analysis on aircraft configurations. This code is to be part of the NASA-Ames ACSYNT (AirCraft SYNThesis) design code. This paper begins with a discussion of contemporary agility research in the aircraft industry and a survey of a few agility metrics. The methodology, techniques and models developed for the code are then presented. Finally, example trade studies using the agility module along with ACSYNT are illustrated. These trade studies were conducted using a Northrop F-20 Tigershark aircraft model. The studies show that the agility module is effective in analyzing the influence of common parameters such as thrust-to-weight ratio and wing loading on agility criteria. The module can compare the agility potential between different configurations. In addition one study illustrates the module's ability to optimize a configuration's agility performance.

  8. Biorobotics: using robots to emulate and investigate agile locomotion.

    PubMed

    Ijspeert, Auke J

    2014-10-10

    The graceful and agile movements of animals are difficult to analyze and emulate because locomotion is the result of a complex interplay of many components: the central and peripheral nervous systems, the musculoskeletal system, and the environment. The goals of biorobotics are to take inspiration from biological principles to design robots that match the agility of animals, and to use robots as scientific tools to investigate animal adaptive behavior. Used as physical models, biorobots contribute to hypothesis testing in fields such as hydrodynamics, biomechanics, neuroscience, and prosthetics. Their use may contribute to the design of prosthetic devices that more closely take human locomotion principles into account. PMID:25301621

  9. Morale as a moderator of the combat exposure-PTSD symptom relationship.

    PubMed

    Britt, Thomas W; Adler, Amy B; Bliese, Paul D; Moore, DeWayne

    2013-02-01

    We examined morale as a moderator of the relationship between combat exposure and posttraumatic stress disorder (PTSD) symptoms in a longitudinal study of U.S. soldiers who had participated in a deployment to Iraq. Soldiers (N = 636) completed assessments at 4 (Time 1) and 10 (Time 2) months following their combat deployment. Combat exposure (both breadth and perceived stressfulness), morale, and PTSD symptoms were assessed at Time 1, and PTSD symptoms were assessed again at Time 2. Results of multivariate multiple regressions revealed that morale at Time 1 interacted with both the breadth and stressfulness of combat exposure to predict PTSD symptoms at both Time 1 and Time 2, even when partialling out the effect of unit support. The slope of the given combat exposure and PTSD symptoms relationship was weaker when reports of morale were higher (with the effect size of the interaction ranging from .01 to .04). The results suggest that morale may buffer soldiers from the negative consequences of combat stressors. PMID:23371305

  10. Historical approaches to post-combat disorders.

    PubMed

    Jones, Edgar

    2006-04-29

    Almost every major war in the last century involving western nations has seen combatants diagnosed with a form of post-combat disorder. Some took a psychological form (exhaustion, combat fatigue, combat stress reaction and post-traumatic stress disorder), while others were characterized by medically unexplained symptoms (soldier's heart, effort syndrome, shell shock, non-ulcer dyspepsia, effects of Agent Orange and Gulf War Syndrome). Although many of these disorders have common symptoms, the explanations attached to them showed considerable diversity often reflected in the labels themselves. These causal hypotheses ranged from the effects of climate, compressive forces released by shell explosions, side effects of vaccinations, changes in diet, toxic effects of organophosphates, oil-well fires or depleted-uranium munitions. Military history suggests that these disorders, which coexisted in the civilian population, reflected popular health fears and emerged in the gaps left by the advance of medical science. While the current Iraq conflict has yet to produce a syndrome typified by medically unexplained symptoms, it is unlikely that we have seen the last of post-combat disorders as past experience suggests that they have the capacity to catch both military planners and doctors by surprise. PMID:16687259

  11. Display integration for ground combat vehicles

    NASA Astrophysics Data System (ADS)

    Busse, David J.

    1998-09-01

    The United States Army's requirement to employ high resolution target acquisition sensors and information warfare to increase its dominance over enemy forces has led to the need to integrate advanced display devices into ground combat vehicle crew stations. The Army's force structure require the integration of advanced displays on both existing and emerging ground combat vehicle systems. The fielding of second generation target acquisition sensors, color digital terrain maps and high volume digital command and control information networks on these platforms define display performance requirements. The greatest challenge facing the system integrator is the development and integration of advanced displays that meet operational, vehicle and human computer interface performance requirements for the ground combat vehicle fleet. The subject of this paper is to address those challenges: operational and vehicle performance, non-soldier centric crew station configurations, display performance limitations related to human computer interfaces and vehicle physical environments, display technology limitations and the Department of Defense (DOD) acquisition reform initiatives. How the ground combat vehicle Program Manager and system integrator are addressing these challenges are discussed through the integration of displays on fielded, current and future close combat vehicle applications.

  12. Historical approaches to post-combat disorders

    PubMed Central

    Jones, Edgar

    2006-01-01

    Almost every major war in the last century involving western nations has seen combatants diagnosed with a form of post-combat disorder. Some took a psychological form (exhaustion, combat fatigue, combat stress reaction and post-traumatic stress disorder), while others were characterized by medically unexplained symptoms (soldier's heart, effort syndrome, shell shock, non-ulcer dyspepsia, effects of Agent Orange and Gulf War Syndrome). Although many of these disorders have common symptoms, the explanations attached to them showed considerable diversity often reflected in the labels themselves. These causal hypotheses ranged from the effects of climate, compressive forces released by shell explosions, side effects of vaccinations, changes in diet, toxic effects of organophosphates, oil-well fires or depleted-uranium munitions. Military history suggests that these disorders, which coexisted in the civilian population, reflected popular health fears and emerged in the gaps left by the advance of medical science. While the current Iraq conflict has yet to produce a syndrome typified by medically unexplained symptoms, it is unlikely that we have seen the last of post-combat disorders as past experience suggests that they have the capacity to catch both military planners and doctors by surprise. PMID:16687259

  13. Between Oais and Agile a Dynamic Data Management Approach

    NASA Astrophysics Data System (ADS)

    Bennett, V. L.; Conway, E. A.; Waterfall, A. M.; Pepler, S.

    2015-12-01

    In this paper we decribe an approach to the integration of existing archival activities which lies between compliance with the more rigid OAIS/TRAC standards and a more flexible "Agile" approach to the curation and preservation of Earth Observation data. We provide a high level overview of existing practice and discuss how these procedures can be extended and supported through the description of preservation state. The aim of which is to facilitate the dynamic controlled management of scientific data through its lifecycle. While processes are considered they are not statically defined but rather driven by human interactions in the form of risk management/review procedure that produce actionable plans, which are responsive to change. We then proceed by describing the feasibility testing of extended risk management and planning procedures which integrate current practices. This was done through the CEDA Archival Format Audit which inspected British Atmospheric Data Centre and NERC Earth Observation Data Centre Archival holdings. These holdings are extensive, comprising of around 2 Petabytes of data and 137 million individual files, which were analysed and characterised in terms of format, based risk. We are then able to present an overview of the format based risk burden faced by a large scale archive attempting to maintain the usability of heterogeneous environmental data sets We continue by presenting a dynamic data management information model and provide discussion of the following core model entities and their relationships: Aspirational entities, which include Data Entity definitions and their associated Preservation Objectives. Risk entities, which act as drivers for change within the data lifecycle. These include Acquisitional Risks, Technical Risks, Strategic Risks and External Risks Plan entities, which detail the actions to bring about change within an archive. These include Acquisition Plans, Preservation Plans and Monitoring plans which support

  14. Defending legitimate epidemiologic research: combating Lysenko pseudoscience.

    PubMed

    Enstrom, James E

    2007-01-01

    This analysis presents a detailed defense of my epidemiologic research in the May 17, 2003 British Medical Journal that found no significant relationship between environmental tobacco smoke (ETS) and tobacco-related mortality. In order to defend the honesty and scientific integrity of my research, I have identified and addressed in a detailed manner several unethical and erroneous attacks on this research. Specifically, I have demonstrated that this research is not "fatally flawed," that I have not made "inappropriate use" of the underlying database, and that my findings agree with other United States results on this relationship. My research suggests, contrary to popular claims, that there is not a causal relationship between ETS and mortality in the U.S. responsible for 50,000 excess annual deaths, but rather there is a weak and inconsistent relationship. The popular claims tend to damage the credibility of epidemiology. In addition, I address the omission of my research from the 2006 Surgeon General's Report on Involuntary Smoking and the inclusion of it in a massive U.S. Department of Justice racketeering lawsuit. I refute erroneous statements made by powerful U.S. epidemiologists and activists about me and my research and I defend the funding used to conduct this research. Finally, I compare many aspect of ETS epidemiology in the U.S. with pseudoscience in the Soviet Union during the period of Trofim Denisovich Lysenko. Overall, this paper is intended to defend legitimate research against illegitimate criticism by those who have attempted to suppress and discredit it because it does not support their ideological and political agendas. Hopefully, this defense will help other scientists defend their legitimate research and combat "Lysenko pseudoscience." PMID:17927827

  15. Defending legitimate epidemiologic research: combating Lysenko pseudoscience

    PubMed Central

    Enstrom, James E

    2007-01-01

    This analysis presents a detailed defense of my epidemiologic research in the May 17, 2003 British Medical Journal that found no significant relationship between environmental tobacco smoke (ETS) and tobacco-related mortality. In order to defend the honesty and scientific integrity of my research, I have identified and addressed in a detailed manner several unethical and erroneous attacks on this research. Specifically, I have demonstrated that this research is not "fatally flawed," that I have not made "inappropriate use" of the underlying database, and that my findings agree with other United States results on this relationship. My research suggests, contrary to popular claims, that there is not a causal relationship between ETS and mortality in the U.S. responsible for 50,000 excess annual deaths, but rather there is a weak and inconsistent relationship. The popular claims tend to damage the credibility of epidemiology. In addition, I address the omission of my research from the 2006 Surgeon General's Report on Involuntary Smoking and the inclusion of it in a massive U.S. Department of Justice racketeering lawsuit. I refute erroneous statements made by powerful U.S. epidemiologists and activists about me and my research and I defend the funding used to conduct this research. Finally, I compare many aspect of ETS epidemiology in the U.S. with pseudoscience in the Soviet Union during the period of Trofim Denisovich Lysenko. Overall, this paper is intended to defend legitimate research against illegitimate criticism by those who have attempted to suppress and discredit it because it does not support their ideological and political agendas. Hopefully, this defense will help other scientists defend their legitimate research and combat "Lysenko pseudoscience." PMID:17927827

  16. A Capstone Course on Agile Software Development Using Scrum

    ERIC Educational Resources Information Center

    Mahnic, V.

    2012-01-01

    In this paper, an undergraduate capstone course in software engineering is described that not only exposes students to agile software development, but also makes it possible to observe the behavior of developers using Scrum for the first time. The course requires students to work as Scrum Teams, responsible for the implementation of a set of user…

  17. Network configuration management : paving the way to network agility.

    SciTech Connect

    Maestas, Joseph H.

    2007-08-01

    Sandia networks consist of nearly nine hundred routers and switches and nearly one million lines of command code, and each line ideally contributes to the capabilities of the network to convey information from one location to another. Sandia's Cyber Infrastructure Development and Deployment organizations recognize that it is therefore essential to standardize network configurations and enforce conformance to industry best business practices and documented internal configuration standards to provide a network that is agile, adaptable, and highly available. This is especially important in times of constrained budgets as members of the workforce are called upon to improve efficiency, effectiveness, and customer focus. Best business practices recommend using the standardized configurations in the enforcement process so that when root cause analysis results in recommended configuration changes, subsequent configuration auditing will improve compliance to the standard. Ultimately, this minimizes mean time to repair, maintains the network security posture, improves network availability, and enables efficient transition to new technologies. Network standardization brings improved network agility, which in turn enables enterprise agility, because the network touches all facets of corporate business. Improved network agility improves the business enterprise as a whole.

  18. Tailoring Agility: Promiscuous Pair Story Authoring and Value Calculation

    NASA Astrophysics Data System (ADS)

    Tendon, Steve

    This chapter describes how a multi-national software organization created a business plan involving business units from eight countries that followed an agile way, after two previously failed attempts with traditional approaches. The case is told by the consultant who initiated implementation of agility into requirements gathering, estimation and planning processes in an international setting. The agile approach was inspired by XP, but then tailored to meet the peculiar requirements. Two innovations were critical. The first innovation was promiscuous pair story authoring, where user stories were written by two people (similarly to pair programming), and the pairing changed very often (as frequently as every 15-20 minutes) to achieve promiscuity and cater for diverse point of views. The second innovation was an economic value evaluation (and not the cost) which was attributed to stories. Continuous recalculation of the financial value of the stories allowed to assess the projects financial return. In this case implementation of agility in the international context allowed the involved team members to reach consensus and unanimity of decisions, vision and purpose.

  19. Wavelength-Agile External-Cavity Diode Laser for DWDM

    NASA Technical Reports Server (NTRS)

    Pilgrim, Jeffrey S.; Bomse, David S.

    2006-01-01

    A prototype external-cavity diode laser (ECDL) has been developed for communication systems utilizing dense wavelength- division multiplexing (DWDM). This ECDL is an updated version of the ECDL reported in Wavelength-Agile External- Cavity Diode Laser (LEW-17090), NASA Tech Briefs, Vol. 25, No. 11 (November 2001), page 14a. To recapitulate: The wavelength-agile ECDL combines the stability of an external-cavity laser with the wavelength agility of a diode laser. Wavelength is modulated by modulating the injection current of the diode-laser gain element. The external cavity is a Littman-Metcalf resonator, in which the zeroth-order output from a diffraction grating is used as the laser output and the first-order-diffracted light is retro-reflected by a cavity feedback mirror, which establishes one end of the resonator. The other end of the resonator is the output surface of a Fabry-Perot resonator that constitutes the diode-laser gain element. Wavelength is selected by choosing the angle of the diffracted return beam, as determined by position of the feedback mirror. The present wavelength-agile ECDL is distinguished by design details that enable coverage of all 60 channels, separated by 100-GHz frequency intervals, that are specified in DWDM standards.

  20. Current State of Agile User-Centered Design: A Survey

    NASA Astrophysics Data System (ADS)

    Hussain, Zahid; Slany, Wolfgang; Holzinger, Andreas

    Agile software development methods are quite popular nowadays and are being adopted at an increasing rate in the industry every year. However, these methods are still lacking usability awareness in their development lifecycle, and the integration of usability/User-Centered Design (UCD) into agile methods is not adequately addressed. This paper presents the preliminary results of a recently conducted online survey regarding the current state of the integration of agile methods and usability/UCD. A world wide response of 92 practitioners was received. The results show that the majority of practitioners perceive that the integration of agile methods with usability/UCD has added value to their adopted processes and to their teams; has resulted in the improvement of usability and quality of the product developed; and has increased the satisfaction of the end-users of the product developed. The top most used HCI techniques are low-fidelity prototyping, conceptual designs, observational studies of users, usability expert evaluations, field studies, personas, rapid iterative testing, and laboratory usability testing.

  1. On the Biomimetic Design of Agile-Robot Legs

    PubMed Central

    Garcia, Elena; Arevalo, Juan Carlos; Muñoz, Gustavo; Gonzalez-de-Santos, Pablo

    2011-01-01

    The development of functional legged robots has encountered its limits in human-made actuation technology. This paper describes research on the biomimetic design of legs for agile quadrupeds. A biomimetic leg concept that extracts key principles from horse legs which are responsible for the agile and powerful locomotion of these animals is presented. The proposed biomimetic leg model defines the effective leg length, leg kinematics, limb mass distribution, actuator power, and elastic energy recovery as determinants of agile locomotion, and values for these five key elements are given. The transfer of the extracted principles to technological instantiations is analyzed in detail, considering the availability of current materials, structures and actuators. A real leg prototype has been developed following the biomimetic leg concept proposed. The actuation system is based on the hybrid use of series elasticity and magneto-rheological dampers which provides variable compliance for natural motion. From the experimental evaluation of this prototype, conclusions on the current technological barriers to achieve real functional legged robots to walk dynamically in agile locomotion are presented. PMID:22247667

  2. AGILE integration into APC for high mix logic fab

    NASA Astrophysics Data System (ADS)

    Gatefait, M.; Lam, A.; Le Gratiet, B.; Mikolajczak, M.; Morin, V.; Chojnowski, N.; Kocsis, Z.; Smith, I.; Decaunes, J.; Ostrovsky, A.; Monget, C.

    2015-09-01

    For C040 technology and below, photolithographic depth of focus control and dispersion improvement is essential to secure product functionality. Critical 193nm immersion layers present initial focus process windows close to machine control capability. For previous technologies, the standard scanner sensor (Level sensor - LS) was used to map wafer topology and expose the wafer at the right Focus. Such optical embedded metrology, based on light reflection, suffers from reading issues that cannot be neglected anymore. Metrology errors are correlated to inspected product area for which material types and densities change, and so optical properties are not constant. Various optical phenomena occur across the product field during wafer inspection and have an effect on the quality and position of the reflected light. This can result in incorrect heights being recorded and exposures possibly being done out of focus. Focus inaccuracy associated to aggressive process windows on critical layers will directly impact product realization and therefore functionality and yield. ASML has introduced an air gauge sensor to complement the optical level sensor and lead to optimal topology metrology. The use of this new sensor is managed by the AGILE (Air Gauge Improved process LEveling) application. This measurement with no optical dependency will correct for optical inaccuracy of level sensor, and so improve best focus dispersion across the product. Due to the fact that stack complexity is more and more important through process steps flow, optical perturbation of standard Level sensor metrology is increasing and is becoming maximum for metallization layers. For these reasons AGILE feature implementation was first considered for contact and all metal layers. Another key point is that standard metrology will be sensitive to layer and reticle/product density. The gain of Agile will be enhanced for multiple product contribution mask and for complex System on Chip. Into ST context (High

  3. SDN-Enabled Dynamic Feedback Control and Sensing in Agile Optical Networks

    NASA Astrophysics Data System (ADS)

    Lin, Likun

    monitoring sensors. In order to maintain signal quality while optimizing network resources, we find that it is essential to model and update estimates of the physical link impairments in real-time. In this thesis, we consider the key elements required to enable an agile optical network, with contributions as follows: • Control Framework: extended the SDN concept to include the optical transport network through extensions to the OpenFlow (OF) protocol. A unified SDN control plane is built to facilitate control and management capability across the electrical/packet-switched and optical/circuit-switched portions of the network seamlessly. The SDN control plane serves as a platform to abstract the resources of multilayer/multivendor networks. Through this platform, applications can dynamically request the network resources to meet their service requirements. • Use of In-situ Monitors: enabled real-time physical impairment sensing in the control plane using in-situ Optical Performance Monitoring (OPM) and bit error rate (BER) analyzers. OPM and BER values are used as quantitative indicators of the link status and are fed to the control plane through a high-speed data collection interface to form a closed-loop feedback system to enable adaptive resource allocation. • Predictive Network Model: used a network model embedded in the control layer to study the link status. The estimated results of network status is fed into the control decisions to precompute the network resources. The performance of the network model can be enhanced by the sensing results. • Real-Time Control Algorithms: investigated various dynamic resource allocation mechanisms supporting an agile optical network. Intelligent routing and wavelength switching for recovering from traffic impairments is achieved experimentally in the agile optical network within one second. A distance-adaptive spectrum allocation scheme to address transmission impairments caused by cascaded Wavelength Selective Switches (WSS

  4. Organizational Agility and Complex Enterprise System Innovations: A Mixed Methods Study of the Effects of Enterprise Systems on Organizational Agility

    ERIC Educational Resources Information Center

    Kharabe, Amol T.

    2012-01-01

    Over the last two decades, firms have operated in "increasingly" accelerated "high-velocity" dynamic markets, which require them to become "agile." During the same time frame, firms have increasingly deployed complex enterprise systems--large-scale packaged software "innovations" that integrate and automate…

  5. Pythium aphanidermatum Infection following Combat Trauma▿

    PubMed Central

    Calvano, Tatjana P.; Blatz, Peter J.; Vento, Todd J.; Wickes, Brian L.; Sutton, Deanna A.; Thompson, Elizabeth H.; White, Christopher E.; Renz, Evan M.; Hospenthal, Duane R.

    2011-01-01

    Pythium aphanidermatum is a fungus-like plant pathogen which has never been reported as a cause of human infection. We report a case of P. aphanidermatum invasive wound infection in a 21-year-old male injured during combat operations in Afghanistan. PMID:21813724

  6. Pythium aphanidermatum infection following combat trauma.

    PubMed

    Calvano, Tatjana P; Blatz, Peter J; Vento, Todd J; Wickes, Brian L; Sutton, Deanna A; Thompson, Elizabeth H; White, Christopher E; Renz, Evan M; Hospenthal, Duane R

    2011-10-01

    Pythium aphanidermatum is a fungus-like plant pathogen which has never been reported as a cause of human infection. We report a case of P. aphanidermatum invasive wound infection in a 21-year-old male injured during combat operations in Afghanistan. PMID:21813724

  7. Combating Labour Market Exclusion: Does Training Work?

    ERIC Educational Resources Information Center

    Descy, Pascaline; Tessaring, Manfred

    2007-01-01

    This article reviews active labour-market policies (ALMP), of which training is prominent. For about 20 years now, they have been one of the most important measures to combat unemployment and exclusion from the labour market. But is training a successful and efficient policy to reduce unemployment, compared to other types of ALMP? We draw some…

  8. How does Listeria monocytogenes combat acid conditions?

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Listeria monocytogenes, a major foodborne pathogen, possesses a number of mechanisms which enable it to combat the challenges posed by acidic environments such as acidic foods and the acidity in the gastrointestinal tract. These mechanisms include the acid tolerance response, a two-component regula...

  9. When war follows combat veterans home.

    PubMed

    Kane, Shawn F; Saperstein, Adam K; Bunt, Christopher W; Stephens, Mark B

    2013-08-01

    While combat survivability is at an all-time high, vets return home to private struggles with depression, PTSD, traumatic brain injury, and substance abuse. Here's how to spot these patients in civilian medical practices and the steps you can take to help them. PMID:24143332

  10. An Educational Program to Combat Venereal Disease.

    ERIC Educational Resources Information Center

    Dotterweich, Andrew H., Jr.

    The purpose of this practicum was to develop, implement, and evaluate an educational program to combat venereal disease. The objectives of the program were: (1) to increase public awareness of the problem of venereal disease, (2) to alert parents and students to the dangers of venereal disease, (3) to enable students to make rational judgments…

  11. Combatives for Alienated Youth: Problems and Prospects.

    ERIC Educational Resources Information Center

    Hellison, Don

    Combative activities (boxing, wrestling, kung fu, etc.) are seen as having a positive influence on alienated inner city youth. Potential contributions of such activities in a school curriculum or recreation program include involvement, security, self-concept, and self-realization. Participants may be able to free themselves from such stereotype…

  12. [The treatment of combat casualties today].

    PubMed

    Maurice, Guillaume de Saint

    2012-12-01

    Most soldiers are wounded by an explosion and haemorrhaging is the main cause of death. From the first aid provided on the field of combat to repatriation to France, every stage in the treatment of injured soldiers is meticulously organised in order to save as many lives as possible. PMID:23316578

  13. Combat Air Identification Fusion Algorithm (CAIFA)

    NASA Astrophysics Data System (ADS)

    Butler, C. A.; Baker, Joni E.; Crowe, John A.; Kierstead, David P.; Mauro, Carl A.

    2003-04-01

    The Combat Air Identification Fusion Algorithm (CAIFA), developed by Daniel H. Wagner, Associates, is a prototype, inferential reasoning algorithm for air combat identification. Bayesian reasoning and updating techniques are used in CAIFA to fuse multi-source identification evidence to provide identity estimates-allegiance, nationality, platform type, and intent-of detected airborne objects in the air battle space, enabling positive and rapid Combat Identification (CID) decisions. CAIFA was developed for the Composite Combat Identification (CCID) project under the Office of Naval Research (ONR) Missile Defense (MD) Future Naval Capability (FNC) program. CAIFA processes identification (ID) attribute evidence generated by surveillance sensors and other information sources over time by updating the identity estimate for each target using Bayesian inference. CAIFA exploits the conditional interdependencies of attribute variables by constructing a context-dependent Bayesian Network (BN). This formulation offers a well-established, consistent approach for evidential reasoning, renders manageable the potentially large CID state space, and provides a flexible and extensible representation to accommodate requirements for model reconfiguration/restructuring. CAIFA enables reasoning across and at different levels of the Air Space Taxonomy.

  14. Program to Combat Stereotyping in Career Choice.

    ERIC Educational Resources Information Center

    Harrison, Laurie R.

    Divided into three sections which deal with sex, race, and handicap stereotyping in career choice, the twenty-eight programs described here attempt to combat stereotypes among students and/or staff (K-12). Most descriptions list the goals of the program, target population, staffing and management, facilities and activities, program effectiveness…

  15. Resolution No. 44/172. Plan of Action to Combat Desertification, 19 December 1989.

    PubMed

    1989-01-01

    Resolution No. 44172, December 19, 1989, from the United Nations-General Assembly reviews the plan of action to combat desertification. Step A, implementation of the plan of action to combat desertification begins with recalling of previous resolutions concerning desertification, acknowledges with deep concern the problem of desertification, which has a global impact but is still on the fringe of growing awareness on the part of the international community, and how imperative it is to combat environment deterioration effectively within the framework of the interdependence of nations. It expresses grave concern at the continuing spread and intensification of decertification in developing countries, particularly in Africa, the indescribable human suffering, economic and financial losses, and social disruption caused by that scourge; it acknowledges that drought and desertification place a considerable burden on the economic and financial capacities of the developing countries affected and that the negative effects of the international economic environment impede their efforts to undertake effective and sustained programs to combat desertification, for which they bear primary responsibility. The resolution notes the inadequacy of financial resources for the implementation of the plan of action to combat desertification, urges governments to increase and intensify their efforts and to prioritize decertification control, and requests a report containing expert studies in the specified areas. Step B, implementation in the Sudan-Sahelian region of the plan of action to combat decertification, begins with the recall of previous resolutions, reviews important facts and concerns, urges affected countries to include projects to combat desertification and drought in their national development plans and to accord high priority to them. It invites the United Nations Sudano-Sahelian office to intensify its efforts to mobilize additional resources to support the efforts of the

  16. DETAIL OF DOORWAY INTO COMBAT INTELLIGENCE ROOM. view TO WEST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF DOORWAY INTO COMBAT INTELLIGENCE ROOM. view TO WEST. - Plattsburgh Air Force Base, Target Intelligence Training Building-Combat Center, Off Connecticut Road, east of Idaho Avenue, Plattsburgh, Clinton County, NY

  17. Combat internist: the internal medicine experience in a combat hospital in Afghanistan.

    PubMed

    Lee, Rachel U; Parrish, Scott C; Saeed, Omar; Fiedler, Joyce P

    2015-01-01

    Military internists and internal medicine subspecialists are physicians who generally work in traditional internal medicine settings. However, when deployed to combat settings, they must prepare and adapt their skills for a wide spectrum of complex, polytrauma, and multinational patients. There are limitations in personnel, equipment, and technical resources that make the circumstances complex and demanding. This article highlights some of the unique roles, challenges, and experiences of four military internists at the NATO Role 3, a deployed combat hospital in Afghanistan. PMID:25562851

  18. Modeling and simulation for collateral damage estimation in combat

    NASA Astrophysics Data System (ADS)

    Gordon, Steven C.; Martin, Douglas D.

    2005-05-01

    Modeling and simulation (M&S) is increasingly used for decision support during combat operations: M&S is going to war! One of the key operational uses of M&S in combat is collateral damage estimation (CDE). Reducing undesired collateral damage (CD) in war and in operations other than war is important to the United States of America. Injuries to noncombatants and damage to protected sites are uniformly avoided by our forces whenever possible in planning and executing combat operations. This desire to limit unwanted CD presents unique challenges to command and control (C2), especially for time-sensitive targeting (TST). The challenges begin the moment a target is identified because CD estimates must meet specified criteria before target approval is granted. Therefore, CDE tools must be accurate, responsive, and human-factored, with graphics that aid C2 decisions. This paper will describe how CDE tools are used to build three-dimensional models of potential target areas and select appropriate munitions, fusing, and delivery in order to minimize predicted CD. The paper will cover the evolution of CDE from using only range rings around the target to improvements through Operation Allied Force, Operation Enduring Freedom, and Operation Iraqi Freedom. Positive CDE feedback from various sources, including the Secretary of Defense, lessons learned, and warfighters will be presented. Current CDE tools in the field and CDE tools used in reachback are being improved, and short-term and long-term improvements in those tools and in the CDE methodology will be described in this paper.

  19. 32 CFR 813.6 - Planning and requesting combat documentation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 6 2011-07-01 2011-07-01 false Planning and requesting combat documentation... SALES AND SERVICES VISUAL INFORMATION DOCUMENTATION PROGRAM § 813.6 Planning and requesting combat documentation. (a) Planned combat documentation. Air components identify documentation needs as early...

  20. 32 CFR 813.6 - Planning and requesting combat documentation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Planning and requesting combat documentation... SALES AND SERVICES VISUAL INFORMATION DOCUMENTATION PROGRAM § 813.6 Planning and requesting combat documentation. (a) Planned combat documentation. Air components identify documentation needs as early...

  1. Application of genetic algorithms to autopiloting in aerial combat simulation

    NASA Astrophysics Data System (ADS)

    Kim, Dai Hyun; Erwin, Daniel A.; Kostrzewski, Andrew A.; Kim, Jeongdal; Savant, Gajendra D.

    1998-10-01

    An autopilot algorithm that controls a fighter aircraft in simulated aerial combat is presented. A fitness function, whose arguments are the control settings of the simulated fighter, is continuously maximized by a fuzzied genetic algorithm. Results are presented for one-to-one combat simulated on a personal computer. Generalization to many-to-many combat is discussed.

  2. The Combat-Exclusion Policy for Military Women.

    ERIC Educational Resources Information Center

    Schneider, Dorothy; Schneider, Carl J.

    1986-01-01

    Reviews the history and meaning of the combat exclusion policy for United States servicewomen. Noting that combat duty is often essential to career advancement in the military, this article describes several cases of discrimination resulting from the effects of the combat exclusion. (JDH)

  3. Early adversity and combat exposure interact to influence anterior cingulate cortex volume in combat veterans☆

    PubMed Central

    Woodward, Steven H.; Kuo, Janice R.; Schaer, Marie; Kaloupek, Danny G.; Eliez, Stephan

    2013-01-01

    Objective Childhood and combat trauma have been observed to interact to influence amygdala volume in a sample of U.S. military veterans with and without PTSD. This interaction was assessed in a second, functionally-related fear system component, the pregenual and dorsal anterior cingulate cortex, using the same sample and modeling approach. Method Anterior cingulate cortical tissues (gray + white matter) were manually-delineated in 1.5 T MR images in 87 U.S. military veterans of the Vietnam and Persian Gulf wars. Hierarchical multiple regression modeling was used to assess associations between anterior cingulate volume and the following predictors, trauma prior to age 13, combat exposure, the interaction of early trauma and combat exposure, and PTSD diagnosis. Results As previously observed in the amygdala, unique variance in anterior cingulate cortical volume was associated with both the diagnosis of PTSD and with the interaction of childhood and combat trauma. The pattern of the latter interaction indicated that veterans with childhood trauma exhibited a significant inverse linear relationship between combat trauma and anterior cingulate volume while those without childhood trauma did not. Such associations were not observed in hippocampal or total cerebral tissue volumes. Conclusions In the dorsal anterior cingulate cortex, as in the amygdala, early trauma may confer excess sensitivity to later combat trauma. PMID:24179818

  4. Impact of limited hamstring flexibility on vertical jump, kicking speed, sprint, and agility in young football players.

    PubMed

    García-Pinillos, F; Ruiz-Ariza, A; Moreno del Castillo, R; Latorre-Román, P Á

    2015-01-01

    This study aims to analyse the impact of limited hamstring flexibility (HF) on specific football skills, such as sprinting and jumping ability, agility, and kicking speed in young football players. Forty-three male football players (aged 14-18) from a semi-professional football academy participated voluntarily in this study. Data about anthropometric measurements, HF (unilateral passive straight-leg raise test: PSLR), vertical jumping ability (countermovement jump: CMJ), sprinting ability (5, 10, 20 m: S5 m, S10 m, S20 m), agility (Balsom agility test: BAT), and kicking speed in terms of ball speed (dominant and non-dominant leg: KSdom and KSnon-dom) were collected. Cluster analysis grouped according to HF, dividing participants into a flexible group (FG, n = 24) and a non-flexible group (NFG, n = 19) in relation to performances on the PSLR test. Despite finding no significant differences between groups in body composition and age, the FG performed better in terms of sprint scores (S5 m: 6.12%, S10 m: 4.09%, S20 m: 3.29%), BAT score (4.11%), CMJ score (10.49%), and scores for KSdom (6.86%) and KSnon-dom (8%) than the NFG. The results suggest that HF is a key factor for performing football-specific skills, such as sprinting, jumping, agility, and kicking in young football players. These results support the rationale that muscle flexibility must be specifically trained in football players beginning at early ages. PMID:25761523

  5. Dermatologists combat leprosy in Yemen.

    PubMed

    al-Qubati, Y; al-Kubati, A S

    1997-12-01

    In the Republic of Yemen, leprosy patients face social stigmatization and considerable suffering. Diagnosis and treatment are delayed by the poor health infrastructure, difficult terrain, and political instability, resulting in unnecessary complications and deformities. The National Leprosy Control Program, established in 1982 with the support of the German Leprosy Relief Association and the World Health Organization, has sought to reach people in remote rural areas. 63 leprosy clinics have been established in 14 regions; 60 of these clinics are integrated into the primary health care system. In addition, dermatologists, with support from international nongovernmental organizations, have campaigned through the media and mobile teams for an end to the ostracism of leprosy patients and urged their reintegration into the community. Other interventions have included the production of posters for health education, construction of an orthopedic workshop, reconstructive surgeries performed by an international corps of volunteer physicians, training courses for medical personnel, and a rehabilitation program to teach sewing to women with leprosy. As a result of early passive detection and other leprosy control efforts, Yemen's leprosy caseload has declined from a peak of 2314 registered for treatment in 1989 to 765 in 1996. The prevalence of leprosy has declined from 1.9/10,000 population in 1989 to 0.5/10,000 in 1996. A combined leprosy-tuberculosis pilot project is under development. By the year 2000, leprosy should be eliminated as a public health problem in Yemen. PMID:9466198

  6. Preparing your Offshore Organization for Agility: Experiences in India

    NASA Astrophysics Data System (ADS)

    Srinivasan, Jayakanth

    Two strategies that have significantly changed the way we conventionally think about managing software development and sustainment are the family of development approaches collectively referred to as agile methods, and the distribution of development efforts on a global scale. When you combine the two strategies, organizations have to address not only the technical challenges that arise from introducing new ways of working, but more importantly have to manage the 'soft' factors that if ignored lead to hard challenges. Using two case studies of distributed agile software development in India we illustrate the areas that organizations need to be aware of when transitioning work to India. The key issues that we emphasize are the need to recruit and retain personnel; the importance of teaching, mentoring and coaching; the need to manage customer expectations; the criticality of well-articulated senior leadership vision and commitment; and the reality of operating in a heterogeneous process environment.

  7. Agile Data Management with the Global Change Information System

    NASA Astrophysics Data System (ADS)

    Duggan, B.; Aulenbach, S.; Tilmes, C.; Goldstein, J.

    2013-12-01

    We describe experiences applying agile software development techniques to the realm of data management during the development of the Global Change Information System (GCIS), a web service and API for authoritative global change information under development by the US Global Change Research Program. Some of the challenges during system design and implementation have been : (1) balancing the need for a rigorous mechanism for ensuring information quality with the realities of large data sets whose contents are often in flux, (2) utilizing existing data to inform decisions about the scope and nature of new data, and (3) continuously incorporating new knowledge and concepts into a relational data model. The workflow for managing the content of the system has much in common with the development of the system itself. We examine various aspects of agile software development and discuss whether or how we have been able to use them for data curation as well as software development.

  8. Pulsar timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Weltevrede, Patrick; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Kramer, Michael; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory

    2009-10-01

    We request time to observe 160 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 2 Agile papers, 4 Fermi papers, 3 radio papers and authors on 3 papers in submission. The data are contributing to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group.

  9. Sprint, agility, strength and endurance capacity in wheelchair basketball players

    PubMed Central

    Granados, C; Otero, M; Badiola, A; Olasagasti, J; Bidaurrazaga-Letona, I; Iturricastillo, A; Gil, SM

    2014-01-01

    The aims of the present study were, firstly, to determine the reliability and reproducibility of an agility T-test and Yo-Yo 10 m recovery test; and secondly, to analyse the physical characteristics measured by sprint, agility, strength and endurance field tests in wheelchair basketball (WB) players. 16 WB players (33.06 ± 7.36 years, 71.89 ± 21.71 kg and sitting body height 86.07 ± 6.82 cm) belonging to the national WB league participated in this study. Wheelchair sprint (5 and 20 m without ball, and 5 and 20 m with ball) agility (T-test and pick-up test) strength (handgrip and maximal pass) and endurance (Yo-Yo 10 m recovery test) were performed. T-test and Yo-Yo 10 m recovery test showed good reproducibility values (intraclass correlation coefficient, ICC = 0.74-0.94). The WB players’ results in 5 and 20 m sprints without a ball were 1.87 ± 0.21 s and 5.70 ± 0.43 s and with a ball 2.10 ± 0.30 s and 6.59 ± 0.61 s, being better than those reported in the literature. Regarding the pick-up test results (16.05 ± 0.52 s) and maximal pass (8.39 ± 1.77 m), players showed worse values than those obtained in elite players. The main contribution of the present study is the characterization of the physical performance profile of WB players using a field test battery. Furthermore, we demonstrated that the agility T-test and the aerobic Yo-Yo 10 m recovery test are reliable; consequently they may be appropriate instruments for measuring physical fitness in WB. PMID:25729153

  10. AGILE detection of a flare from PKS 1510-089

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Tavani, M.; Fioretti, V.; Gianotti, F.; Trifoglio, M.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Vercellone, S.; Piano, G.; Donnarumma, I.; Striani, E.; Cardillo, M.; Giuliani, A.; Mereghetti, S.; Caraveo, P.; Perotti, F.; Chen, A.; Colafrancesco, S.; Del Monte, E.; Evangelista, Y.; Feroci, M.; Lazzarotto, F.; Pacciani, L.; Soffitta, P.; Costa, E.; Lapshov, I.; Rapisarda, M.; Argan, A.; Pucella, G.; Sabatini, S.; Trois, A.; Vittorini, V.; Fuschino, F.; Galli, M.; Labanti, C.; Marisaldi, M.; Di Cocco, G.; Pellizzoni, A.; Pilia, M.; Barbiellini, G.; Vallazza, E.; Longo, F.; Morselli, A.; Picozza, P.; Prest, M.; Lipari, P.; Zanello, D.; Cattaneo, P. W.; Rappoldi, A.; Giommi, P.; Salotti, L.; Valentini, G.

    2014-08-01

    AGILE is now detecting transient gamma-ray emission above 100 MeV from a source positionally consistent with PKS 1510-089. Integrating from 2014-07-31 00:43 UT to 2014-08-02 02:15 UT, a preliminary maximum likelihood analysis yields a detection above 100 MeV positioned at Galactic coordinates (l,b) = (350.96, 40.12) +/- 0.9 (stat.) +/- 0.1 (syst.).