Science.gov

Sample records for all-optical conditional logic

  1. All-optical symmetric ternary logic gate

    NASA Astrophysics Data System (ADS)

    Chattopadhyay, Tanay

    2010-09-01

    Symmetric ternary number (radix=3) has three logical states (1¯, 0, 1). It is very much useful in carry free arithmetical operation. Beside this, the logical operation using this type of number system is also effective in high speed computation and communication in multi-valued logic. In this literature all-optical circuits for three basic symmetrical ternary logical operations (inversion, MIN and MAX) are proposed and described. Numerical simulation verifies the theoretical model. In this present scheme the different ternary logical states are represented by different polarized state of light. Terahertz optical asymmetric demultiplexer (TOAD) based interferometric switch has been used categorically in this manuscript.

  2. Photonic encryption using all optical logic.

    SciTech Connect

    Blansett, Ethan L.; Schroeppel, Richard Crabtree; Tang, Jason D.; Robertson, Perry J.; Vawter, Gregory Allen; Tarman, Thomas David; Pierson, Lyndon George

    2003-12-01

    With the build-out of large transport networks utilizing optical technologies, more and more capacity is being made available. Innovations in Dense Wave Division Multiplexing (DWDM) and the elimination of optical-electrical-optical conversions have brought on advances in communication speeds as we move into 10 Gigabit Ethernet and above. Of course, there is a need to encrypt data on these optical links as the data traverses public and private network backbones. Unfortunately, as the communications infrastructure becomes increasingly optical, advances in encryption (done electronically) have failed to keep up. This project examines the use of optical logic for implementing encryption in the photonic domain to achieve the requisite encryption rates. In order to realize photonic encryption designs, technology developed for electrical logic circuits must be translated to the photonic regime. This paper examines two classes of all optical logic (SEED, gain competition) and how each discrete logic element can be interconnected and cascaded to form an optical circuit. Because there is no known software that can model these devices at a circuit level, the functionality of the SEED and gain competition devices in an optical circuit were modeled in PSpice. PSpice allows modeling of the macro characteristics of the devices in context of a logic element as opposed to device level computational modeling. By representing light intensity as voltage, 'black box' models are generated that accurately represent the intensity response and logic levels in both technologies. By modeling the behavior at the systems level, one can incorporate systems design tools and a simulation environment to aid in the overall functional design. Each black box model of the SEED or gain competition device takes certain parameters (reflectance, intensity, input response), and models the optical ripple and time delay characteristics. These 'black box' models are interconnected and cascaded in an

  3. Rapidly Reconfigurable All-Optical Universal Logic Gates

    SciTech Connect

    Goddard, L L; Kallman, J S; Bond, T C

    2006-06-21

    We present designs and simulations for a highly cascadable, rapidly reconfigurable, all-optical, universal logic gate. We will discuss the gate's expected performance, e.g. speed, fanout, and contrast ratio, as a function of the device layout and biasing conditions. The gate is a three terminal on-chip device that consists of: (1) the input optical port, (2) the gate selection port, and (3) the output optical port. The device can be built monolithically using a standard multiple quantum well graded index separate confinement heterostructure laser configuration. The gate can be rapidly and repeatedly reprogrammed to perform any of the basic digital logic operations by using an appropriate analog electrical or optical signal at the gate selection port. Specifically, the same gate can be selected to execute one of the 2 basic unary operations (NOT or COPY), or one of the 6 binary operations (OR, XOR, AND, NOR, XNOR, or NAND), or one of the many logic operations involving more than two inputs. The speed of the gate for logic operations as well as for reprogramming the function of the gate is primarily limited to the small signal modulation speed of a laser, which can be on the order of tens of GHz. The reprogrammable nature of the universal gate offers maximum flexibility and interchangeability for the end user since the entire application of a photonic integrated circuit built from cascaded universal logic gates can be changed simply by adjusting the gate selection port signals.

  4. All-optical switching and all-optical logic gates based on bacteriorhodopsin

    NASA Astrophysics Data System (ADS)

    Huang, Yuhua; Wu, Shin-Tson; Zhao, Youyuan

    2004-06-01

    We demonstrate an all-optical switching using a bacteriorhodopsin (bR) film. The transmission of the bR film is investigated using the pump-probe method. A diode-pumped second harmonic YAG laser (λ = 532nm which is around the maximum initial B state absorption) was used as a pumping beam and a cw He-Ne laser (λ = 632 nm which is around the peaks of K and O states) was used as a probe. Due to the nonlinear intensity induced excited state absorption of the K, L, M, N, and O states in the bR photocycle, the switching characteristics are sensitive to the intensity of the probe and pump beams. Based on this property, we design an all-optical operating device functioning as 11 kinds of variable binary all-optical logic gates. The incident 532nm beam acts as an input to the logic gate and the transmission of the 632nm bears the output of the gate.

  5. All-optical biomolecular parallel logic gates with bacteriorhodopsin.

    PubMed

    Sharma, Parag; Roy, Sukhdev

    2004-06-01

    All-optical two input parallel logic gates with bacteriorhodopsin (BR) protein have been designed based on nonlinear intensity-induced excited-state absorption. Amplitude modulation of a continuous wave (CW) probe laser beam transmission at 640 nm corresponding to the peak absorption of O intermediate state through BR, by a modulating CW pump laser beam at 570 nm corresponding to the peak absorption of initial BR state has been analyzed considering all six intermediate states in its photocycle using the rate equation approach. The transmission characteristics have been shown to exhibit a dip, which is sensitive to normalized small-signal absorption coefficient (beta), rate constants of O and N intermediate states and absorption of the O state at 570 nm. There is an optimum value of beta for a given pump intensity range for which maximum modulation can be achieved. It is shown that 100% modulation can be achieved if the initial state of BR does not absorb the probe beam. The results have been used to design low-power all-optical parallel NOT, AND, OR, XNOR, and the universal NAND and NOR logic gates for two cases: 1) only changing the output threshold and 2) considering a common threshold with different beta values. PMID:15382746

  6. Rapidly reconfigurable all-optical universal logic gate

    DOEpatents

    Goddard, Lynford L.; Bond, Tiziana C.; Kallman, Jeffrey S.

    2010-09-07

    A new reconfigurable cascadable all-optical on-chip device is presented. The gate operates by combining the Vernier effect with a novel effect, the gain-index lever, to help shift the dominant lasing mode from a mode where the laser light is output at one facet to a mode where it is output at the other facet. Since the laser remains above threshold, the speed of the gate for logic operations as well as for reprogramming the function of the gate is primarily limited to the small signal optical modulation speed of the laser, which can be on the order of up to about tens of GHz. The gate can be rapidly and repeatedly reprogrammed to perform any of the basic digital logic operations by using an appropriate analog optical or electrical signal at the gate selection port. Other all-optical functionality includes wavelength conversion, signal duplication, threshold switching, analog to digital conversion, digital to analog conversion, signal routing, and environment sensing. Since each gate can perform different operations, the functionality of such a cascaded circuit grows exponentially.

  7. Photonic encryption : modeling and functional analysis of all optical logic.

    SciTech Connect

    Tang, Jason D.; Schroeppel, Richard Crabtree; Robertson, Perry J.

    2004-10-01

    With the build-out of large transport networks utilizing optical technologies, more and more capacity is being made available. Innovations in Dense Wave Division Multiplexing (DWDM) and the elimination of optical-electrical-optical conversions have brought on advances in communication speeds as we move into 10 Gigabit Ethernet and above. Of course, there is a need to encrypt data on these optical links as the data traverses public and private network backbones. Unfortunately, as the communications infrastructure becomes increasingly optical, advances in encryption (done electronically) have failed to keep up. This project examines the use of optical logic for implementing encryption in the photonic domain to achieve the requisite encryption rates. This paper documents the innovations and advances of work first detailed in 'Photonic Encryption using All Optical Logic,' [1]. A discussion of underlying concepts can be found in SAND2003-4474. In order to realize photonic encryption designs, technology developed for electrical logic circuits must be translated to the photonic regime. This paper examines S-SEED devices and how discrete logic elements can be interconnected and cascaded to form an optical circuit. Because there is no known software that can model these devices at a circuit level, the functionality of S-SEED devices in an optical circuit was modeled in PSpice. PSpice allows modeling of the macro characteristics of the devices in context of a logic element as opposed to device level computational modeling. By representing light intensity as voltage, 'black box' models are generated that accurately represent the intensity response and logic levels in both technologies. By modeling the behavior at the systems level, one can incorporate systems design tools and a simulation environment to aid in the overall functional design. Each black box model takes certain parameters (reflectance, intensity, input response), and models the optical ripple and time delay

  8. All-optical logic devices with cascaded nonlinear couplers.

    PubMed

    Wang, Y; Wang, Z H; Bialkowski, M E

    2000-08-10

    The switching behaviors of cascaded nonlinear couplers were investigated. They have nearly ideal digital-switching characteristics, and their output power levels can be adjusted by means of varying the nonlinear coupling coefficient of the final coupler. The two-input excitation nonlinear cascaded couplers can perform not only switching operations but also a series of logic operations. The logic operations depend mainly on the coupling length of the two-input coupler and its initial inputs. The power corresponding to the rising and falling ridge of the logic operating waveforms can be shifted effectively by means of varying the switching power of the reshaper. Allowable ranges of three important parameters--coupling length of the two-input coupler L(1), bias optical power P(bia), and phase difference psi between the signal and bias beams for six fundamental logic operations--were calculated. Curves for design considerations and suggestions for the best choice of parameters for stable and reliable logic operations and, or, xor, nand, nor, and nxor are also presented individually. PMID:18349996

  9. Integrated all-optical logic discriminators based on plasmonic bandgap engineering

    PubMed Central

    Lu, Cuicui; Hu, Xiaoyong; Yang, Hong; Gong, Qihuang

    2013-01-01

    Optical computing uses photons as information carriers, opening up the possibility for ultrahigh-speed and ultrawide-band information processing. Integrated all-optical logic devices are indispensible core components of optical computing systems. However, up to now, little experimental progress has been made in nanoscale all-optical logic discriminators, which have the function of discriminating and encoding incident light signals according to wavelength. Here, we report a strategy to realize a nanoscale all-optical logic discriminator based on plasmonic bandgap engineering in a planar plasmonic microstructure. Light signals falling within different operating wavelength ranges are differentiated and endowed with different logic state encodings. Compared with values previously reported, the operating bandwidth is enlarged by one order of magnitude. Also the SPP light source is integrated with the logic device while retaining its ultracompact size. This opens up a way to construct on-chip all-optical information processors and artificial intelligence systems. PMID:24071647

  10. Polarization-based all-optical logic operations in volume holographic photopolymer

    NASA Astrophysics Data System (ADS)

    Li, Chengmingyue; Cao, Liangcai; Li, Jingming; Wang, Zheng; Jin, Guofan

    2014-11-01

    Polarization-based all-optical logic operations were realized with dual-channel polarization holographic recording system. The polarization property of 9, 10-phenanthrenequinone-doped poly-methyl methacrylate (PQ/PMMA) photopolymer is investigated experimentally. To accurately represent the optical operations, the diffraction efficiency of parallel and orthogonal polarization recording in PQ/PMMA with the thickness of 1 mm are characterized for holographic recording and reconstruction process. A dual-channel polarization holographic recording system is set up for simultaneously recording two input pages. By changing the polarization state of the diffraction beam, all-optical logic OR and NAND operations are realized in the volume holograms. The polarization-based all-optical logic operations in the volume holographic photopolymer may pave a way for practical all-optical logic devices with high speed and large information capacity.

  11. Photonic-crystal-based all-optical NOT logic gate.

    PubMed

    Singh, Brahm Raj; Rawal, Swati

    2015-12-01

    In the present paper, we have utilized the concept of photonic crystals for the implementation of an optical NOT gate inverter. The designed structure has a hexagonal arrangement of silicon rods in air substrate. The logic function is based on the phenomenon of the existence of the photonic bandgap and resulting guided modes in defect photonic crystal waveguides. We have plotted the transmission, extinction ratio, and tolerance analysis graphs for the structure, and it has been observed that the maximum output is obtained for a telecom wavelength of 1.554 μm. Dispersion curves are obtained using the plane wave expansion method, and the transmission is simulated using the finite element method. The proposed structure is applicable for photonic integrated circuits due to its simple structure and clear operating principle. PMID:26831380

  12. Chip-integrated ultrawide-band all-optical logic comparator in plasmonic circuits

    PubMed Central

    Lu, Cuicui; Hu, Xiaoyong; Yang, Hong; Gong, Qihuang

    2014-01-01

    Optical computing opens up the possibility for the realization of ultrahigh-speed and ultrawide-band information processing. Integrated all-optical logic comparator is one of the indispensable core components of optical computing systems. Unfortunately, up to now, no any nanoscale all-optical logic comparator suitable for on-chip integration applications has been realized experimentally. Here, we report a subtle and effective technical solution to circumvent the obstacles of inherent Ohmic losses of metal and limited propagation length of SPPs. A nanoscale all-optical logic comparator suitable for on-chip integration applications is realized in plasmonic circuits directly. The incident single-bit (or dual-bit) logic signals can be compared and the comparison results are endowed with different logic encodings. An ultrabroad operating wavelength range from 700 to 1000 nm, and an ultrahigh output logic-state contrast-ratio of more than 25 dB are realized experimentally. No high power requirement is needed. Though nanoscale SPP light source and the logic comparator device are integrated into the same plasmonic chip, an ultrasmall feature size is maintained. This work not only paves a way for the realization of complex logic device such as adders and multiplier, but also opens up the possibility for realizing quantum solid chips based on plasmonic circuits. PMID:24463956

  13. Compact all-optical interferometric logic gates based on one-dimensional metal-insulator-metal structures

    NASA Astrophysics Data System (ADS)

    Bian, Yusheng; Gong, Qihuang

    2014-02-01

    The whole set of fundamental all-optical logic gates is realized theoretically using a multi-channel configuration based on one-dimensional (1D) metal-insulator-metal (MIM) structures by leveraging the linear interference between surface plasmon polariton modes. The working principle and conditions for different logic functions are analyzed and demonstrated numerically by means of the finite element method. In contrast to most of the previous studies that require more than one type of configuration to achieve different logic functions, a single geometry with fixed physical dimensions can realize all fundamental functions in our case studies. It is shown that by switching the optical signals to different input channels, the presented device can realize simple logic functions such as OR, AND and XOR. By adding signal in the control channel, more functions including NOT, XNOR, NAND and NOR can be implemented. For these considered logic functions, high intensity contrast ratios between Boolean logic states "1" and "0" can be achieved at the telecom wavelength. The presented all-optical logic device is simple, compact and efficient. Moreover, the proposed scheme can be applied to many other nano-photonic logic devices as well, thereby potentially offering useful guidelines for their designs and further applications in on-chip optical computing and optical interconnection networks.

  14. 20Gbit/s all-optical logic OR in terahertz optical asymmetric demultiplexer (TOAD)

    NASA Astrophysics Data System (ADS)

    Yan, Yumei; Wu, Jian; Lin, Jintong

    2005-01-01

    A scheme for all-optical logic OR based on transparent teraherz optical asymmetric demultiplexer (transparent-TOAD) is proposed in this paper. In the transparent-TOAD, the SOA is biased at transparency and the gain recovery time determined by the intraband effect has the value of only a few picoseconds. Numerical analysis shows that the switching window of the transparent-TOAD is only about 0.54ps and the potential for ultrahigh speed all-optical logic processing is shown. Numerical demonstration is performed for 4-bit and 16-bit logic OR at 20Gbit/s. The results coincide with the OR truth table, showing high extinction ratio and no pattern dependency. Detailed analysis is carried out on the performance of the logic OR scheme.

  15. Design of polarization encoded all-optical 4-valued MAX logic gate and its applications

    NASA Astrophysics Data System (ADS)

    Chattopadhyay, Tanay; Nath Roy, Jitendra

    2013-07-01

    Quaternary maximum (QMAX) gate is one type of multi-valued logic gate. An all-optical scheme of polarization encoded quaternary (4-valued) MAX logic gate with the help of Terahertz Optical Asymmetric Demultiplexer (TOAD) based fiber interferometric switch is proposed and described. For the quaternary information processing in optics, the quaternary number (0, 1, 2, 3) can be represented by four discrete polarized states of light. Numerical simulation result confirming the described methods is given in this paper. Some applications of MAX gate in logical operation and memory device are also given.

  16. Realization of all-optical logic gates through three core photonic crystal fiber

    NASA Astrophysics Data System (ADS)

    Uthayakumar, T.; Vasantha Jayakantha Raja, R.; Porsezian, K.

    2013-06-01

    We present the practical design of novel three core photonic crystal fiber (TPCF) for optical switching and logic operations by employing all optical control. To accomplish the proposed aim, we put forth two types of symmetrical TPCF designs, one with cores of planar geometry and the other with equilateral triangular geometry. The dynamics of the individual pulse parameters through the proposed geometries are analyzed numerically using split step Fourier method (SSFM). The steering characteristics of the coupler are demonstrated by the transmission curve. The truth tables expressing Boolean algebra for different logic operations are constructed from the transmission curves of the individual coupler configurations. Out of all configurations, we observe that the chloroform filled triangular core demonstrates all the logic operations namely OR, NOR, AND, NAND, X-OR, X-NOR and NOT with low input power. A figure of merit of logic gates (FOMEL) is also made to compare the performance of all the logic gates.

  17. Micro-ring resonator based all-optical reconfigurable logic operations

    NASA Astrophysics Data System (ADS)

    Rakshit, Jayanta Kumar; Roy, Jitendra Nath

    2014-06-01

    An all-optical reconfigurable logic operation essentially constitutes a key technology for performing various processing tasks with ultrafast signal-processing technologies. We present designs and simulations for highly cascadable all-optical reconfigurable logic operations using GaAs-AlGaAs micro-ring resonator based optical switches and multiplexers. The switching action of the ring resonator is achieved through variation in the refractive index of the ring resonator produced by the two-photon absorption (TPA) effect through the application of optical pump pulse. The proposed circuit can perform any of the four digital logic operations (NOT, NOR, XOR, AND) by using the appropriate optical pump signal at the selection port of the multiplexer. We have tried to exploit the advantages of micro-ring resonator based all optical switch to design an all-optical circuit. The reconfigurable nature of the circuit offers maximum flexibility for the end user since the entire application can be changed simply by adjusting the multiplexer select line signals. Numerical simulation confirming described methods is given in this paper.

  18. All-optical logic gates based on cross-phase modulation in an asymmetric coupler

    NASA Astrophysics Data System (ADS)

    Li, Qiliang; Yuan, Hongliang

    2014-05-01

    In this paper we propose an operation of an all-optical logical gate based on an asymmetric nonlinear directional coupler operating with the cross-phase modulation. Two-input OR and XOR gates and a new logical operation based on an asymmetric nonlinear directional coupler, which can be applied to transmission and processing of signals in all-optical systems, are examined. Initially, we evaluate the effect of the pump power on switching. We import a pulse into the nonlinear directional coupler, meanwhile adding a pump light via wavelength division multiplex in order to take advantage of Kerr effect and produce the cross-phase modulation. In this situation, we analyze two possible situations for the two-input logical gate, and draw a switching characteristic curve via Matlab. Finally, we define the truth table and it is clear that OR and XOR logic gates and a new logical operation can be realized by changing the pump power. Next the investigation also indicates that to change the input pulse's phase switching can be realized. In the same way, we define the truth table and it can be observed that different logic gates are realized.

  19. All-optical logic gates and wavelength conversion via the injection locking of a Fabry-Perot semiconductor laser

    NASA Astrophysics Data System (ADS)

    Harvey, E.; Pochet, M.; Schmidt, J.; Locke, T.; Naderi, N.; Usechak, N. G.

    2013-03-01

    This work investigates the implementation of all-optical logic gates based on optical injection locking (OIL). All-optical inverting, NOR, and NAND gates are experimentally demonstrated using two distributed feedback (DFB) lasers, a multi-mode Fabry-Perot laser diode, and an optical band-pass filter. The DFB lasers are externally modulated to represent logic inputs into the cavity of the multi-mode Fabry-Perot slave laser. The input DFB (master) lasers' wavelengths are aligned with the longitudinal modes of the Fabry-Perot slave laser and their optical power is used to modulate the injection conditions in the Fabry-Perot slave laser. The optical band-pass filter is used to select a Fabry- Perot mode that is either suppressed or transmitted given the logic state of the injecting master laser signals. When the input signal(s) is (are) in the on state, injection locking, and thus the suppression of the non-injected Fabry-Perot modes, is induced, yielding a dynamic system that can be used to implement photonic logic functions. Additionally, all-optical photonic processing is achieved using the cavity-mode shift produced in the injected slave laser under external optical injection. The inverting logic case can also be used as a wavelength converter — a key component in advanced wavelength-division multiplexing networks. As a result of this experimental investigation, a more comprehensive understanding of the locking parameters involved in injecting multiple lasers into a multi-mode cavity and the logic transition time is achieved. The performance of optical logic computations and wavelength conversion has the potential for ultrafast operation, limited primarily by the photon decay rate in the slave laser.

  20. Passive all-optical polarization switch, binary logic gates, and digital processor.

    PubMed

    Zaghloul, Y A; Zaghloul, A R M; Adibi, A

    2011-10-10

    We introduce the passive all-optical polarization switch, which modulates light with light. That switch is used to construct all the binary logic gates of two or more inputs. We discuss the design concepts and the operation of the AND, OR, NAND, and NOR gates as examples. The rest of the 16 logic gates are similarly designed. Cascading of such gates is straightforward as we show and discuss. Cascading in itself does not require a power source, but feedback at this stage of development does. The design and operation of an SR Latch is presented as one of the popular basic sequential devices used for memory cells. That completes the essential components of an all-optical polarization digital processor. The speed of such devices is well above 10 GHz for bulk implementations and is much higher for chip-size implementations. In addition, the presented devices do have the four essential characteristics previously thought unique to the microelectronic ones. PMID:21997044

  1. All-optical universal logic gates on nonlinear multimode interference coupler using tunable input intensity

    NASA Astrophysics Data System (ADS)

    Tajaldini, Mehdi; Jafri, Mohd Zubir Mat

    2015-04-01

    The theory of Nonlinear Modal Propagation Analysis Method (NMPA) have shown significant features of nonlinear multimode interference (MMI) coupler with compact dimension and when launched near the threshold of nonlinearity. Moreover, NMPA have the potential to allow studying the nonlinear MMI based the modal interference to explorer the phenomenon that what happen due to the natural of multimode region. Proposal of all-optical switch based NMPA has approved its capability to achieving the all-optical gates. All-optical gates have attracted increasing attention due to their practical utility in all-optical signal processing networks and systems. Nonlinear multimode interference devices could apply as universal all-optical gates due to significant features that NMPA introduce them. In this Paper, we present a novel Ultra-compact MMI coupler based on NMPA method in low intensity compared to last reports either as a novel design method and potential application for optical NAND, NOR as universal gates on single structure for Boolean logic signal processing devices and optimize their application via studding the contrast ratio between ON and OFF as a function of output width. We have applied NMPA for several applications so that the miniaturization in low nonlinear intensities is their main purpose.

  2. Complete all-optical processing polarization-based binary logic gates and optical processors.

    PubMed

    Zaghloul, Y A; Zaghloul, A R M

    2006-10-16

    We present a complete all-optical-processing polarization-based binary-logic system, by which any logic gate or processor can be implemented. Following the new polarization-based logic presented in [Opt. Express 14, 7253 (2006)], we develop a new parallel processing technique that allows for the creation of all-optical-processing gates that produce a unique output either logic 1 or 0 only once in a truth table, and those that do not. This representation allows for the implementation of simple unforced OR, AND, XOR, XNOR, inverter, and more importantly NAND and NOR gates that can be used independently to represent any Boolean expression or function. In addition, the concept of a generalized gate is presented which opens the door for reconfigurable optical processors and programmable optical logic gates. Furthermore, the new design is completely compatible with the old one presented in [Opt. Express 14, 7253 (2006)], and with current semiconductor based devices. The gates can be cascaded, where the information is always on the laser beam. The polarization of the beam, and not its intensity, carries the information. The new methodology allows for the creation of multiple-input-multiple-output processors that implement, by itself, any Boolean function, such as specialized or non-specialized microprocessors. Three all-optical architectures are presented: orthoparallel optical logic architecture for all known and unknown binary gates, singlebranch architecture for only XOR and XNOR gates, and the railroad (RR) architecture for polarization optical processors (POP). All the control inputs are applied simultaneously leading to a single time lag which leads to a very-fast and glitch-immune POP. A simple and easy-to-follow step-by-step algorithm is provided for the POP, and design reduction methodologies are briefly discussed. The algorithm lends itself systematically to software programming and computer-assisted design. As examples, designs of all binary gates, multiple

  3. A new design procedure for all-optical photonic crystal logic gates and functions based on threshold logic

    NASA Astrophysics Data System (ADS)

    Sharifi, Hojjat; Hamidi, Seyyedeh Mehri; Navi, Keivan

    2016-07-01

    In this paper, a general method is proposed to design all-optical photonic crystal logic gates and functions based on threshold logic concept that have regular pattern in inputs. In our proposed structure, a photonic crystal junction is cascaded by a threshold power level detector. Additionally, a novel mechanism is introduced to shift the threshold power level for designing different logic gates and functions. The finite difference time domain and plane wave expansion methods are used to evaluate the proposed structures. The proposed gates and functions occupy an area less than 150 μm2 and also, the maximum power required for the switching mechanism is 15 μW. The inputs and output in the mentioned gates and functions are homogeneous and they can operate with a bit rate of about 500 Gbits/s.

  4. Realization of all-optical AND-OR logic gates using the Z-scan method

    NASA Astrophysics Data System (ADS)

    Dhinaa, A. N.; Palanisamy, P. K.; Murali, K.

    2013-10-01

    The NLO properties of organic materials have been studied with the single-beam Z-scan technique using a CW laser beam. A He-Ne laser operated at 632.8 nm with a power output of 12 mW is used for this study. A closed-aperture setup is used to measure the nonlinear refractive index of Patent blue V dye dissolved in distilled water. The material exhibits negative nonlinearity. Optical limiting behavior has been observed for this dye. Further, we have modified the Z-scan setup suitably to realize all-optical AND and OR logic gates.

  5. High-speed all-optical logic inverter based on stimulated Raman scattering in silicon nanocrystal.

    PubMed

    Sen, Mrinal; Das, Mukul K

    2015-11-01

    In this paper, we propose a new device architecture for an all-optical logic inverter (NOT gate), which is cascadable with a similar device. The inverter is based on stimulated Raman scattering in silicon nanocrystal waveguides, which are embedded in a silicon photonic crystal structure. The Raman response function of silicon nanocrystal is evaluated to explore the transfer characteristic of the inverter. A maximum product criterion for the noise margin is taken to analyze the cascadability of the inverter. The time domain response of the inverter, which explores successful inversion operation at 100 Gb/s, is analyzed. Propagation delay of the inverter is on the order of 5 ps, which is less than the delay in most of the electronic logic families as of today. Overall dimension of the device is around 755  μm ×15  μm, which ensures integration compatibility with the matured silicon industry. PMID:26560565

  6. All-optical switches, unidirectional flow, and logic gates with discrete solitons in waveguide arrays.

    PubMed

    Al Khawaja, U; Al-Marzoug, S M; Bahlouli, H

    2016-05-16

    We propose a mechanism by which a number of useful all-optical operations, such as switches, diodes, and logic gates, can be performed with a single device. An effective potential well is obtained by modulating the coupling between the waveguides through their separations. Depending on the power of a control soliton injected through the potential well, an incoming soliton will either completely transmit or reflect forming a controllable switch. We show that two such switches can work as AND, OR, NAND, and NOR logic gates. Furthermore, the same device may also function as a perfect soliton diode with adjustable polarity. We discuss the feasibility of realising such devices with current experimental setups. PMID:27409929

  7. Ultrafast all-optical arithmetic logic based on hydrogenated amorphous silicon microring resonators

    NASA Astrophysics Data System (ADS)

    Gostimirovic, Dusan; Ye, Winnie N.

    2016-03-01

    For decades, the semiconductor industry has been steadily shrinking transistor sizes to fit more performance into a single silicon-based integrated chip. This technology has become the driving force for advances in education, transportation, and health, among others. However, transistor sizes are quickly approaching their physical limits (channel lengths are now only a few silicon atoms in length), and Moore's law will likely soon be brought to a stand-still despite many unique attempts to keep it going (FinFETs, high-k dielectrics, etc.). This technology must then be pushed further by exploring (almost) entirely new methodologies. Given the explosive growth of optical-based long-haul telecommunications, we look to apply the use of high-speed optics as a substitute to the digital model; where slow, lossy, and noisy metal interconnections act as a major bottleneck to performance. We combine the (nonlinear) optical Kerr effect with a single add-drop microring resonator to perform the fundamental AND-XOR logical operations of a half adder, by all-optical means. This process is also applied to subtraction, higher-order addition, and the realization of an all-optical arithmetic logic unit (ALU). The rings use hydrogenated amorphous silicon as a material with superior nonlinear properties to crystalline silicon, while still maintaining CMOS-compatibility and the many benefits that come with it (low cost, ease of fabrication, etc.). Our method allows for multi-gigabit-per-second data rates while maintaining simplicity and spatial minimalism in design for high-capacity manufacturing potential.

  8. All-optical light modulation in pharaonis phoborhodopsin and its application to parallel logic gates

    NASA Astrophysics Data System (ADS)

    Sharma, Parag; Roy, Sukhdev

    2004-08-01

    All-optical light modulation in pharaonis phoborhodopsin (ppR) protein has been analyzed considering its ppRO state dynamics based on nonlinear intensity-induced excited-state absorption. Amplitude modulation of a cw probe laser beam transmission at 560nm corresponding to the peak absorption of ppRO intermediate state through ppR, by a modulating cw pump laser beam at 498nm corresponding to the peak absorption of initial ppR state has been analyzed considering all six intermediate states in its photocylce using the rate equation approach. The transmission characteristics have been shown to exhibit a dip at relatively lower pump intensity values compared to bacteriorhodopsin, which is sensitive to normalized small-signal absorption coefficient (β ), rate constants of ppRM and ppRO states, and absorption of the ppRO state at 498nm. There is an optimum value of β for a given pump intensity range for which maximum modulation can be achieved. It is shown that 100% modulation can be achieved if the initial state of ppR does not absorb the probe beam. The results have been used to design low power all optical parallel NOT, AND, OR, XNOR, and the universal NAND and NOR logic gates for two cases: (i) only changing the output threshold and (ii) considering a common threshold with different β values. At typical parameters, wild-type (WT) ppR based logic gates can be realized at considerably lower pump powers than WT-bR.

  9. Quantum-dot all-optical logic in a structured vacuum

    SciTech Connect

    Ma Xun; John, Sajeev

    2011-07-15

    We demonstrate multiwavelength channel optical logic operations on the Bloch vector of a quantum two-level system in the structured electromagnetic vacuum of a bimodal photonic crystal waveguide. This arises through a bichromatic strong-coupling effect that enables unprecedented control over single quantum-dot (QD) excitation through two beams of ultrashort femtojoule pulses. The second driving pulse (signal) with slightly different frequency and weaker strength than the first (holding) pulse leads to controllable strong modulation of the QD Bloch vector evolution path. This occurs through resonant coupling of the signal pulse with the Mollow sideband transitions created by the holding pulse. The movement of the Mollow sidebands during the passage of the holding pulse leads to an effective chirping in transition frequency seen by the signal. Bloch vector dynamics in the rotating frame of the signal pulse and within the dressed-state basis created by the holding pulse reveals that this chirped coupling between the signal pulse and the Mollow sidebands leads to either augmentation or negation of the final quantum-dot population (after pulse passage) compared to the outcome of the holding pulse alone and depending on the relative frequencies of the pulses. By making use of this extra degree of freedom for ultrafast control of QD excitations, applications in ultrafast all-optical logic and, or, and not gates are proposed in the presence of significant (0.1) THz nonradiative dephasing and (about 1%) inhomogeneous broadening.

  10. All-optical transistor- and diode-action and logic gates based on anisotropic nonlinear responsive liquid crystal

    PubMed Central

    Wang, Cheng-Yu; Chen, Chun-Wei; Jau, Hung-Chang; Li, Cheng-Chang; Cheng, Chiao-Yu; Wang, Chun-Ta; Leng, Shi-Ee; Khoo, Iam-Choon; Lin, Tsung-Hsien

    2016-01-01

    In this paper, we show that anisotropic photosensitive nematic liquid crystals (PNLC) made by incorporating anisotropic absorbing dyes are promising candidates for constructing all-optical elements by virtue of the extraordinarily large optical nonlinearity of the nematic host. In particular, we have demonstrated several room-temperature ‘prototype’ PNLC-based all-optical devices such as optical diode, optical transistor and all primary logic gate operations (OR, AND, NOT) based on such optical transistor. Owing to the anisotropic absorption property and the optical activity of the twist alignment nematic cell, spatially non-reciprocal transmission response can be obtained within a sizeable optical isolation region of ~210 mW. Exploiting the same mechanisms, a tri-terminal configuration as an all-optical analogue of a bipolar junction transistor is fabricated. Its ability to be switched by an optical field enables us to realize an all-optical transistor and demonstrate cascadability, signal fan-out, logic restoration, and various logical gate operations such as OR, AND and NOT. Due to the possibility of synthesizing anisotropic dyes and wide ranging choice of liquid crystals nonlinear optical mechanisms, these all-optical operations can be optimized to have much lower thresholds and faster response speeds. The demonstrated capabilities of these devices have shown great potential in all-optical control system and photonic integrated circuits. PMID:27491391

  11. All-optical transistor- and diode-action and logic gates based on anisotropic nonlinear responsive liquid crystal

    NASA Astrophysics Data System (ADS)

    Wang, Cheng-Yu; Chen, Chun-Wei; Jau, Hung-Chang; Li, Cheng-Chang; Cheng, Chiao-Yu; Wang, Chun-Ta; Leng, Shi-Ee; Khoo, Iam-Choon; Lin, Tsung-Hsien

    2016-08-01

    In this paper, we show that anisotropic photosensitive nematic liquid crystals (PNLC) made by incorporating anisotropic absorbing dyes are promising candidates for constructing all-optical elements by virtue of the extraordinarily large optical nonlinearity of the nematic host. In particular, we have demonstrated several room-temperature ‘prototype’ PNLC-based all-optical devices such as optical diode, optical transistor and all primary logic gate operations (OR, AND, NOT) based on such optical transistor. Owing to the anisotropic absorption property and the optical activity of the twist alignment nematic cell, spatially non-reciprocal transmission response can be obtained within a sizeable optical isolation region of ~210 mW. Exploiting the same mechanisms, a tri-terminal configuration as an all-optical analogue of a bipolar junction transistor is fabricated. Its ability to be switched by an optical field enables us to realize an all-optical transistor and demonstrate cascadability, signal fan-out, logic restoration, and various logical gate operations such as OR, AND and NOT. Due to the possibility of synthesizing anisotropic dyes and wide ranging choice of liquid crystals nonlinear optical mechanisms, these all-optical operations can be optimized to have much lower thresholds and faster response speeds. The demonstrated capabilities of these devices have shown great potential in all-optical control system and photonic integrated circuits.

  12. All-optical transistor- and diode-action and logic gates based on anisotropic nonlinear responsive liquid crystal.

    PubMed

    Wang, Cheng-Yu; Chen, Chun-Wei; Jau, Hung-Chang; Li, Cheng-Chang; Cheng, Chiao-Yu; Wang, Chun-Ta; Leng, Shi-Ee; Khoo, Iam-Choon; Lin, Tsung-Hsien

    2016-01-01

    In this paper, we show that anisotropic photosensitive nematic liquid crystals (PNLC) made by incorporating anisotropic absorbing dyes are promising candidates for constructing all-optical elements by virtue of the extraordinarily large optical nonlinearity of the nematic host. In particular, we have demonstrated several room-temperature 'prototype' PNLC-based all-optical devices such as optical diode, optical transistor and all primary logic gate operations (OR, AND, NOT) based on such optical transistor. Owing to the anisotropic absorption property and the optical activity of the twist alignment nematic cell, spatially non-reciprocal transmission response can be obtained within a sizeable optical isolation region of ~210 mW. Exploiting the same mechanisms, a tri-terminal configuration as an all-optical analogue of a bipolar junction transistor is fabricated. Its ability to be switched by an optical field enables us to realize an all-optical transistor and demonstrate cascadability, signal fan-out, logic restoration, and various logical gate operations such as OR, AND and NOT. Due to the possibility of synthesizing anisotropic dyes and wide ranging choice of liquid crystals nonlinear optical mechanisms, these all-optical operations can be optimized to have much lower thresholds and faster response speeds. The demonstrated capabilities of these devices have shown great potential in all-optical control system and photonic integrated circuits. PMID:27491391

  13. All-optical XOR and OR logic gates based on line and point defects in 2-D photonic crystal

    NASA Astrophysics Data System (ADS)

    Goudarzi, Kiyanoosh; Mir, Ali; Chaharmahali, Iman; Goudarzi, Dariush

    2016-04-01

    In this paper, we have proposed an all-optical logic gate structure based on line and point defects created in the two dimensional square lattice of silicon rods in air photonic crystals (PhCs). Line defects are embedded in the ГX and ГZ directions of the momentum space. The device has two input and two output ports. It has been shown analytically whether the initial phase difference between the two input beams is π/2, they interfere together constructively or destructively to realize the logical functions. The simulation results show that the device can acts as a XOR and an OR logic gate. It is applicable in the frequency range of 0-0.45 (a/λ), however we set it at (a/λ=) 0.419 for low dispersion condition, correspondingly the lambda is equal to 1.55 μm. The maximum delay time to response to the input signals is about 0.4 ps, hence the speed of the device is about 2.5 THz. Also 6.767 dB is the maximum contrast ratio of the device.

  14. High-speed all-optical NAND/AND logic gates using four-wave mixing Bragg scattering.

    PubMed

    Li, Kangmei; Ting, Hong-Fu; Foster, Mark A; Foster, Amy C

    2016-07-15

    A high-speed all-optical NAND logic gate is proposed and experimentally demonstrated using four-wave mixing Bragg scattering in highly nonlinear fiber. NAND/AND logic functions are implemented at two wavelengths by encoding logic inputs on two pumps via on-off keying. A 15.2-dB depletion of the signal is obtained for NAND operation, and time domain measurements show 10-Gb/s NAND/AND logic operations with open eye diagrams. The approach can be readily extended to higher data rates and transferred to on-chip waveguide platforms. PMID:27420525

  15. Implementation of all-optical reversible logic gate based on holographic laser induced grating using azo-dye doped polymers

    NASA Astrophysics Data System (ADS)

    Forsati, Rana; Valipour Ebrahimi, Sara; Navi, Keivan; Mohajerani, Ezeddin; Jashnsaz, Hossein

    2013-02-01

    Increasing demand for power reduction in computer systems has led to new trends in computations and computer design including reversible computing. Its main aim is to eliminate power dissipation in logical elements but can have some other advantages such as data security and error prevention. Because of interesting properties of reversible computing, implementing computing devices with reversible manner is the only way to make the reversible computing a reality. In recent years, reversible logic has turned out to be a promising computing paradigm having application in CMOS, nanotechnology, quantum computing and optical computing. In this paper, we propose and realize a novel implementation of Toffoli gate in all-optical domain. We have explained its principle of operations and described an actual experimental implementation. The all-optical reversible gate presented in this paper will be useful in different applications such as arithmetic and logical operations in the domain of reversible logic-based computing.

  16. All-optical cross-bar network architecture using TOAD based interferometric switch and designing of reconfigurable logic unit

    NASA Astrophysics Data System (ADS)

    Chattopadhyay, Tanay

    2011-12-01

    The design of all-optical 2 × 2 Terahertz Optical Asymmetric Demultiplexer (TOAD) based interferometric switch is proposed and described in this manuscript. Numerical simulation has been done to achieve the performance of the switch. Using this 2 × 2 TOAD based switch, cross-bar network architecture is designed. A reconfigurable logic unit is also proposed in this manuscript, which can perform 16-Boolean logical operations.

  17. Design and analysis of polarization independent all-optical logic gates in silicon-on-insulator photonic crystal

    NASA Astrophysics Data System (ADS)

    Rani, Preeti; Kalra, Yogita; Sinha, R. K.

    2016-09-01

    In this paper, we have reported design and analysis of polarization independent all optical logic gates in silicon-on-insulator photonic crystal consisting of two dimensional honeycomb lattices with two different air holes exhibiting photonic band gap for both TE and TM mode in the optical communication window. The proposed structures perform as an AND optical logic gate and all the optical logic gates based on the phenomenon of interference. The response period and bit rate for TE and TM polarizations at a wavelength of 1.55 μm show improved results as reported earlier.

  18. All-optical digital logic: Full addition or subtraction on a three-state system

    SciTech Connect

    Remacle, F.; Levine, R. D.

    2006-03-15

    Stimulated Raman adiabatic passage (STIRAP) is a well-studied pump-probe control scheme for manipulating the population of quantum states of atoms or molecules. By encoding the digits to be operated on as 'on' or 'off' laser input signals we show how STIRAP can be used to implement a finite-state logic machine. The physical conditions required for an effective STIRAP operation are related to the physical conditions expected for a logic machine. In particular, a condition is derived on the mean number of photons that represent an on pulse. A finite-state machine computes Boolean expressions that depend both on the input and on the present state of the machine. With two input signals we show how to implement a full adder where the carry-in digit is stored in the state of the machine. Furthermore, we show that it is possible to store the carry-out digit as the next state and thereby return the machine to a state ready for the next full addition. Such a machine operates as a cyclical full adder. We further show how this full adder can equally well be operated as a full subtractor. To the best of our knowledge this is the first example of a nanosized system that implements a full subtraction.

  19. Nanoscale on-chip all-optical logic parity checker in integrated plasmonic circuits in optical communication range

    NASA Astrophysics Data System (ADS)

    Wang, Feifan; Gong, Zibo; Hu, Xiaoyong; Yang, Xiaoyu; Yang, Hong; Gong, Qihuang

    2016-04-01

    The nanoscale chip-integrated all-optical logic parity checker is an essential core component for optical computing systems and ultrahigh-speed ultrawide-band information processing chips. Unfortunately, little experimental progress has been made in development of these devices to date because of material bottleneck limitations and a lack of effective realization mechanisms. Here, we report a simple and efficient strategy for direct realization of nanoscale chip-integrated all-optical logic parity checkers in integrated plasmonic circuits in the optical communication range. The proposed parity checker consists of two-level cascaded exclusive-OR (XOR) logic gates that are realized based on the linear interference of surface plasmon polaritons propagating in the plasmonic waveguides. The parity of the number of logic 1s in the incident four-bit logic signals is determined, and the output signal is given the logic state 0 for even parity (and 1 for odd parity). Compared with previous reports, the overall device feature size is reduced by more than two orders of magnitude, while ultralow energy consumption is maintained. This work raises the possibility of realization of large-scale integrated information processing chips based on integrated plasmonic circuits, and also provides a way to overcome the intrinsic limitations of serious surface plasmon polariton losses for on-chip integration applications.

  20. Nanoscale on-chip all-optical logic parity checker in integrated plasmonic circuits in optical communication range.

    PubMed

    Wang, Feifan; Gong, Zibo; Hu, Xiaoyong; Yang, Xiaoyu; Yang, Hong; Gong, Qihuang

    2016-01-01

    The nanoscale chip-integrated all-optical logic parity checker is an essential core component for optical computing systems and ultrahigh-speed ultrawide-band information processing chips. Unfortunately, little experimental progress has been made in development of these devices to date because of material bottleneck limitations and a lack of effective realization mechanisms. Here, we report a simple and efficient strategy for direct realization of nanoscale chip-integrated all-optical logic parity checkers in integrated plasmonic circuits in the optical communication range. The proposed parity checker consists of two-level cascaded exclusive-OR (XOR) logic gates that are realized based on the linear interference of surface plasmon polaritons propagating in the plasmonic waveguides. The parity of the number of logic 1s in the incident four-bit logic signals is determined, and the output signal is given the logic state 0 for even parity (and 1 for odd parity). Compared with previous reports, the overall device feature size is reduced by more than two orders of magnitude, while ultralow energy consumption is maintained. This work raises the possibility of realization of large-scale integrated information processing chips based on integrated plasmonic circuits, and also provides a way to overcome the intrinsic limitations of serious surface plasmon polariton losses for on-chip integration applications. PMID:27073154

  1. Nanoscale on-chip all-optical logic parity checker in integrated plasmonic circuits in optical communication range

    PubMed Central

    Wang, Feifan; Gong, Zibo; Hu, Xiaoyong; Yang, Xiaoyu; Yang, Hong; Gong, Qihuang

    2016-01-01

    The nanoscale chip-integrated all-optical logic parity checker is an essential core component for optical computing systems and ultrahigh-speed ultrawide-band information processing chips. Unfortunately, little experimental progress has been made in development of these devices to date because of material bottleneck limitations and a lack of effective realization mechanisms. Here, we report a simple and efficient strategy for direct realization of nanoscale chip-integrated all-optical logic parity checkers in integrated plasmonic circuits in the optical communication range. The proposed parity checker consists of two-level cascaded exclusive-OR (XOR) logic gates that are realized based on the linear interference of surface plasmon polaritons propagating in the plasmonic waveguides. The parity of the number of logic 1s in the incident four-bit logic signals is determined, and the output signal is given the logic state 0 for even parity (and 1 for odd parity). Compared with previous reports, the overall device feature size is reduced by more than two orders of magnitude, while ultralow energy consumption is maintained. This work raises the possibility of realization of large-scale integrated information processing chips based on integrated plasmonic circuits, and also provides a way to overcome the intrinsic limitations of serious surface plasmon polariton losses for on-chip integration applications. PMID:27073154

  2. Compact design of all-optical logic gates based on self-collimation phenomenon in two-dimensional photonic crystal

    NASA Astrophysics Data System (ADS)

    Christina Xavier, Susan; Arunachalam, Kabilan

    2012-04-01

    Optical logic gates are a basic and fundamental component for optical networks and optical computing. The authors propose a structure for AND, NAND, XNOR, and NOR logic gates in two-dimensional photonic crystal, which utilizes dispersion-based self-collimation effect. The self-collimated beam is split by the line defect and interferes with other self-collimated beams. This interference may be constructive or destructive based on its phase difference. This phenomenon is employed to realize all optical logic gates. The gates are demonstrated numerically by computing electromagnetic field distribution using finite difference time domain (FDTD) method. The results ensure that this design could function as AND, NAND, XNOR, and NOR logic gates. The size of the structure is about 10 µm × 10 µm, which, in turn, results in increasing the speed, and all the gates are realized in the same configuration. On-off contrast ratios of the gates are about 6 dB.

  3. All-optical transistors and logic gates using a parity-time-symmetric Y-junction: Design and simulation

    SciTech Connect

    Ding, Shulin; Wang, Guo Ping

    2015-09-28

    Classical nonlinear or quantum all-optical transistors are dependent on the value of input signal intensity or need extra co-propagating beams. In this paper, we present a kind of all-optical transistors constructed with parity-time (PT)-symmetric Y-junctions, which perform independently on the value of signal intensity in an unsaturated gain case and can also work after introducing saturated gain. Further, we show that control signal can switch the device from amplification of peaks in time to transformation of peaks to amplified troughs. By using these PT-symmetric Y-junctions with currently available materials and technologies, we can implement interesting logic functions such as NOT and XOR (exclusive OR) gates, implying potential applications of such structures in designing optical logic gates, optical switches, and signal transformations or amplifications.

  4. All-optical logic gates based on cross phase modulation effect in a phase-shifted grating.

    PubMed

    Li, Qiliang; Song, Junfeng; Chen, Xin; Bi, Meihua; Hu, Miao; Li, Shuqin

    2016-09-01

    In this paper, we perform a theoretical study of the all-optical logic gates based on the techniques of cross phase modulation (XPM) in a phase-shifted grating. Here the pumps are used to control the switching of a weak continuous wave (cw). In order to understand the transferring process of the information from the pump light to the cw light, we first study the switching characteristic of the device. Then, by changing the combination between two pumps, in a fiber grating with zero phase shift we have realized NOT, AND, and NAND gates, and in a phase-shifted grating with the phase shift π, the other various logic operations can be realized such as NAND gates and OR gates; when selecting Δφ=3/2π, we can realize XOR gates and XNOR gates. Thus the change of the phase shift of the phase-shifted grating will yield various logic gates. PMID:27607262

  5. Performance analysis of an all-optical logic gate based on a single I/Q modulator with direct detection.

    PubMed

    Zhai, Yaxue; Tang, Xianfeng; Zhang, Xiaoguang; Xi, Lixia; Zhang, Wenbo

    2016-09-01

    This paper investigates the performance of an all-optical logic gate scheme based on a single in-phase and quadrature (I/Q) modulator with direct detection. The proposed scheme of an all-optical logic gate is simple, high speed, and easily reconfigured to realize 24 logic states by adjusting bias voltages, peak-to-peak voltages of the driven RF signals, and the phase shift. As the scheme to realize logic gates is based on the irregular use of a commercially available I/Q modulator and laser source, a specialized logic gate system including a laser, I/Q modulator, and driven RF module should be optimally designed to obtain the best performance. With the system's extinction ratio (ER) and Q-factor as metrics, the performance of the proposed logic gate scheme is analyzed theoretically and numerically in this paper. We first give a new theoretical model of the I/Q modulator. Next, taking the OR gate as an example, the simulations are carried out to analyze performance under the influence of some key factors in the system. Results show that the extinction ratio of the whole system is affected by the phase shift between the two arms of the I/Q modulator and the extinction ratios of two Mach-Zehnder modulators (MZMs), while Q-factor is further influenced by the output power of the laser and the insertion loss of the MZMs in the I/Q modulator. For an I/Q modulator with MZMs having an extinction ratio of 20 dB, the minimum laser output power to obtain a system's ER higher than 16 dB is 3 dBm, while in order to obtain a Q-factor higher than 6, the output power of the laser must not be <10  dBm. PMID:27607252

  6. All-optical sub-ps switching and parallel logic gates with bacteriorhodopsin (BR) protein and BR-gold nanoparticles

    NASA Astrophysics Data System (ADS)

    Roy, Sukhdev; Yadav, Chandresh

    2014-12-01

    We propose a model for the early sub-picosecond (sub-ps) transitions in the photochromic bacteriorhodopsin (BR) protein photocycle (B570 → H → I460 → J625 → B570) and present a detailed analysis of ultrafast all-optical switching for different pump-probe combinations. BR excitation with 120 fs pump pulses at 570 or 612 nm results in the switching of cw probe beams at 460 and 580 nm exhibiting reverse saturable absorption (RSA) and saturable absorption (SA) respectively. The effect of pump intensity, pump pulse width, lifetime of I460 state, thickness and concentration on switching has been studied in detail. It is shown that low intensity (MW cm-2), high contrast (100%), sub-ps all-optical switching can be achieved with BR-gold nanoparticle solutions. The validity of the proposed model is evident from the good agreement of theoretical simulations with reported experimental results. The switching characteristics have been optimized to design ultrafast all-optical parallel NOT, OR, AND and the universal NOR and NAND logic gates. High contrast, ultrafast switching at relatively lower pump intensities, compared to other organic molecules, opens up exciting prospects for ultrafast, all-optical information processing with BR and BR nano-biophotonic hybrid materials.

  7. Reconfigurable all-optical logic gate using four-wave mixing (FWM) in HNLF for NRZ-PolSK signal

    NASA Astrophysics Data System (ADS)

    Li, Lanlan; Wu, Jian; Qiu, Jifang; Wu, Bingbing; Xu, Kun; Hong, Xiaobin; Li, Yan; Lin, Jintong

    2010-10-01

    We demonstrate a reconfigurable all-optical logic gate for NRZ-PolSK signal based on FWM in a highly nonlinear fiber at 10 Gb/s. Half subtracter, XOR, AB¯, Ā B or XNOR, AND, and NOR logic gates can be implemented simultaneously. The input power for the HNLF is optimized to be as low as about 15.2 dBm and the high Q factors above 8 dB for eye diagrams are achieved. Experimental results show Q factors of AB¯, Ā B, AND, and NOR were higher than those of XOR, and XNOR. Error-free operation is achieved experimentally for 10 Gb/s 2 7-1 pseudorandom bit sequence (PRBS) data. Power penalties for the logic gate are less than 3 dB. Simulation analysis about the wavelength characteristic for all logic gates is given and it predicts that the reconfigurable logic gate can realize error-free operation when the wavelength separation is less than 5 nm.

  8. Molecular level all-optical logic with chlorophyll absorption spectrum and polarization sensitivity

    NASA Astrophysics Data System (ADS)

    Raychaudhuri, B.; Bhattacharyya (Bhaumik), S.

    2008-06-01

    Chlorophyll is suggested as a suitable medium for realizing optical Boolean logic at the molecular level in view of its wavelength-selective property and polarization sensitivity in the visible region. Spectrophotometric studies are made with solutions of total chlorophyll and chromatographically isolated components, viz. chlorophyll a and b and carotenoids extracted from pumpkin leaves of different maturity stages. The absorption features of matured chlorophyll with two characteristic absorption peaks and one transmission band are molecular properties and independent of concentration. A qualitative explanation of such an absorption property is presented in terms of a ‘particle in a box’ model and the property is employed to simulate two-input optical logic operations. If both of the inputs are either red or blue, absorption is high. If either one is absent and replaced by a wavelength of the transmission band, e.g. green, absorption is low. Assigning these values as 0 s or 1 s, AND and OR operations can be performed. A NOT operation can be simulated with the transmittance instead of the absorbance. Also, the shift in absorbance values for two different polarizations of the same monochromatic light can simulate two logical states with a single wavelength. Cyclic change in absorbance is noted over a rotation of 360° for both red and blue peaks, although the difference is not very large. Red monochromatic light with polarizations apart by 90°, corresponding to maximum and minimum absorption, respectively, may be assigned as the two logical states. The fluorescence emissions for different pigment components are measured at different excitation wavelengths and the effect of fluorescence on the red absorbance is concluded to be negligible.

  9. Fast, all-optical logic gates and transistor functionalities using a room-temperature atomic controlled Kerr gate

    NASA Astrophysics Data System (ADS)

    Li, R. B.; Deng, L.; Hagley, E. W.

    2014-12-01

    We demonstrate all-optical multilogic gate operations and transistor functionalities using a Kerr phase gate method in a room-temperature 85Rb vapor. Two symmetric Mach-Zehnder interferometers are constructed in the same vapor cell in which a Raman gain medium is established. We show three basic logic gates (and, or, and not) by controlling the output combinations from the two interferometers. With one weakly driven interferometer acting as the phase control light for a strongly driven interferometer, we further demonstrate optical field-effect transistor functionalities. More complex combinations of this Kerr phase gate method and scheme allow all eight basic logic gate operations including the controlled-not gate to be constructed and implemented.

  10. Integrated all-optical logic and arithmetic operations with the help of a TOAD-based interferometer device--alternative approach

    NASA Astrophysics Data System (ADS)

    Nath Roy, Jitendra; Gayen, Dilip Kumar

    2007-08-01

    Interferometric devices have drawn a great interest in all-optical signal processing for their high-speed photonic activity. The nonlinear optical loop mirror provides a major support to optical switching based all-optical logic and algebraic operations. The gate based on the terahertz optical asymmetric demultiplexer (TOAD) has added new momentum in this field. Optical tree architecture (OTA) plays a significant role in the optical interconnecting network. We have tried to exploit the advantages of both OTA- and TOAD-based switches. We have proposed a TOAD-based tree architecture, a new and alternative scheme, for integrated all-optical logic and arithmetic operations.

  11. All-optical switching in bacteriorhodopsin based on M state dynamics and its application to photonic logic gates

    NASA Astrophysics Data System (ADS)

    Singh, Chandra Pal; Roy, Sukhdev

    2003-03-01

    All-optical switching has been theoretically analyzed in bacteriorhodopsin (bR) based on nonlinear intensity induced excited state absorption of the M state. The transmission of a cw probe laser beam at 410 nm corresponding to the peak absorption of M state through a bR film is switched by a pulsed pump laser beam at 570 nm that corresponds to the maximum initial B state absorption. The switching characteristics have been numerically simulated using the rate equation approach considering all the six intermediate states (B, K, L, M, N and O) in the bR photocycle. The switching characteristics are shown to be sensitive to various parameters such as the pump pulse width, pump intensity, life time of the M state, thickness of the film and absorption cross-section of the B-state at probe wavelength ( σBp). It has been shown that the probe laser beam can be completely switched off (100% modulation) by the pump laser beam at relatively low pump powers, for σBp=0. The switching characteristics have also been used to theoretically design all-optical NOT, OR, AND and the universal NOR and NAND logic gates with two pulsed pump laser beams using the six state model.

  12. Fixed weight Hopfield Neural Network based on optical implementation of all-optical MZI-XNOR logic gate

    NASA Astrophysics Data System (ADS)

    Nugamesh Mutter, Kussay; Mat Jafri, Mohd Zubir; Abdul Aziz, Azlan

    2010-05-01

    Many researches are conducted to improve Hopfield Neural Network (HNN) performance especially for speed and memory capacity in different approaches. However, there is still a significant scope of developing HNN using Optical Logic Gates. We propose here a new model of HNN based on all-optical XNOR logic gates for real time color image recognition. Firstly, we improved HNN toward optimum learning and converging operations. We considered each unipolar image as a set of small blocks of 3-pixels as vectors for HNN. This enables to save large number of images in the net with best reaching into global minima, and because there are only eight fixed states of weights so that only single iteration performed to construct a vector with stable state at minimum energy. HNN is useless in dealing with data not in bipolar representation. Therefore, HNN failed to work with color images. In RGB bands each represents different values of brightness, for d-bit RGB image it is simply consists of d-layers of unipolar. Each layer is as a single unipolar image for HNN. In addition, the weight matrices with stability of unity at the diagonal perform clear converging in comparison with no self-connecting architecture. Synchronously, each matrix-matrix multiplication operation would run optically in the second part, since we propose an array of all-optical XOR gates, which uses Mach-Zehnder Interferometer (MZI) for neurons setup and a controlling system to distribute timely signals with inverting to achieve XNOR function. The primary operation and simulation of the proposal HNN is demonstrated.

  13. Conditional Logic and Primary Children.

    ERIC Educational Resources Information Center

    Ennis, Robert H.

    Conditional logic, as interpreted in this paper, means deductive logic characterized by "if-then" statements. This study sought to investigate the knowledge of conditional logic possessed by primary children and to test their readiness to learn such concepts. Ninety students were designated the experimental group and participated in a 15-week…

  14. Multiphoton resonances for all-optical quantum logic with multiple cavities

    NASA Astrophysics Data System (ADS)

    Everitt, Mark S.; Garraway, Barry M.

    2014-07-01

    We develop a theory for the interaction of multilevel atoms with multimode cavities yielding cavity-enhanced multiphoton resonances. The locations of the resonances are predicted from the use of effective two- and three-level Hamiltonians. As an application we show that quantum gates can be realized when photonic qubits are encoded on the cavity modes in arrangements where ancilla atoms transit the cavity. The fidelity of operations is increased by conditional measurements on the atom and by the use of a selected, dual-rail, Hilbert space. A universal set of gates is proposed, including the Fredkin gate and iswap operation; the system seems promising for scalability.

  15. PPLN-based all-optical 40 Gbit/s ODB/AMI/FSK wavelength conversion and FSK logic NOT gate

    NASA Astrophysics Data System (ADS)

    Wang, J.; Sun, Q.; Sun, J.; Hu, Z.

    2009-07-01

    We propose and demonstrate all-optical wavelength conversion for optical duobinary (ODB), alternate-mark inversion (AMI), and frequency-shift keying (FSK) signals and a logic NOT gate for a FSK signal based on cascaded second-harmonic generation and difference-frequency generation (cSHG/DFG) in a periodically poled lithium niobate (PPLN) waveguide. ODB/AMI/FSK are generated from the demodulation of differential phase-shift keying (DPSK) using one-bit-delay fiber delay interferometer (FDI). PPLN-based 40 Gbit/s ODB/AMI/FSK wavelength conversion and FSK logic NOT gate are simultaneously implemented in the experiment.

  16. All-optical logic gate based on transient grating from disperse red 1 doped organic-inorganic hybrid films with an improved figure of merit

    SciTech Connect

    Gao, Tianxi; Que, Wenxiu Shao, Jinyou; Wang, Yushu

    2015-10-21

    Azobenzene dyes have large refractive index near their main resonance, but the poor figure of merit (FOM) limits their potential for all-optical applications. To improve this situation, disperse red 1 (DR1) molecules were dispersed in a sol-gel germanium/Ormosil organic-inorganic hybrid matrix. Z-scan measurement results showed a good compatibility between the dopant and the matrix, and also, an improved FOM was obtained as compared to the DR1/polymer films reported previously. To demonstrate the all-optical signal processing effect, a cw Nd:YAG laser emitting at 532 nm and a He-Ne laser emitting at 632.8 nm were used as pump and probe beams, respectively. DR1 acts as an initiator of the photo-induced transient holographic grating, which is attributed to the trans-cis-trans photoisomerization. Thus, a three inputs AND all-optical logic gate was achieved by using choppers with different frequencies. The detailed mechanism of operation is discussed. These results indicate that the DR1 doped germanium/Ormosil organic-inorganic hybrid film with an improved FOM has a great potential in all-optical devices around its main resonance.

  17. Femtosecond all-optical parallel logic gates based on tunable saturable to reverse saturable absorption in graphene-oxide thin films

    SciTech Connect

    Roy, Sukhdev Yadav, Chandresh

    2013-12-09

    A detailed theoretical analysis of ultrafast transition from saturable absorption (SA) to reverse saturable absorption (RSA) has been presented in graphene-oxide thin films with femtosecond laser pulses at 800 nm. Increase in pulse intensity leads to switching from SA to RSA with increased contrast due to two-photon absorption induced excited-state absorption. Theoretical results are in good agreement with reported experimental results. Interestingly, it is also shown that increase in concentration results in RSA to SA transition. The switching has been optimized to design parallel all-optical femtosecond NOT, AND, OR, XOR, and the universal NAND and NOR logic gates.

  18. Ultrafast all-optical logic OR gate based on two-photon absorption with a semiconductor optical amplifier-assisted delayed interferometer

    NASA Astrophysics Data System (ADS)

    Kotb, Amer

    2016-01-01

    The performance of an all-optical logic OR gate is numerically studied and simulated. This Boolean operation is realized by using a semiconductor optical amplifier (SOA) and a delayed interferometer (DI) based on two-photon absorption (TPA). The input pulse intensities are high enough so that the two-photon-induced phase change is larger than the regular gain-induced phase change. The study is carried out with the effect of the amplified spontaneous emission (ASE) taken into account in the simulation analysis. The dependence of the output quality factor ( Q-factor) on the data signals and SOA's parameters is also investigated and discussed. The achieved results show that the OR gate is capable of operating at a data speed of 250 Gb/s with logical correctness and proper Q-factor.

  19. Spin centres in SiC for all-optical nanoscale quantum sensing under ambient conditions

    NASA Astrophysics Data System (ADS)

    Anisimov, A. N.; Babunts, R. A.; Kidalov, S. V.; Mokhov, E. N.; Soltamov, V. A.; Baranov, P. G.

    2016-07-01

    Level anticrossing (LAC) spectroscopy was demonstrated on a family of uniaxially oriented spin colour centres with S = 3/2 in the ground and excited states in hexagonal 4H-, 6H- and rhombic 15R- SiC polytypes. It was shown that these centres exhibit unique characteristics such as optical spin alignment up to the temperatures of 250 ◦C. A sharp variation of the IR photoluminescence intensity in the vicinity of LAC with the record contrast was observed, which can be used for a purely all-optical sensing of the magnetic field and temperature without applying radiofrequency field. A distinctive feature of the LAC signal is weak dependence on the direction of the magnetic field that allows one to monitor the LAC signals in the nonoriented systems, such as powder of SiC nanocrystals.

  20. Demonstration and optimisation of an ultrafast all-optical AND logic gate using four-wave mixing in a semiconductor optical amplifier

    SciTech Connect

    Razaghi, M; Nosratpour, A; Das, N K

    2013-02-28

    We have proposed an all-optical AND logic gate based on four-wave mixing (FWM) in a semiconductor optical amplifier (SOA) integrated with an optical filter. In the scheme proposed, the preferred logical function can be performed without using a continuous-wave (cw) signal. The modified nonlinear Schroedinger equation (MNLSE) is used for the modelling wave propagation in a SOA. The MNLSE takes into account all nonlinear effects relevant to pico- and sub-picosecond pulse durations and is solved by the finite-difference beam-propagation method (FD-BPM). Based on the simulation results, the optimal output signal with a 40-fJ energy can be obtained at a bit rate of 50 Gb s{sup -1}. In the simulations, besides the nonlinearities included in the model, the pattern effect of the signals propagating in the SOA medium and the effect of the input signal bit rate are extensively investigated to optimise the system performance. (optical logic elements)

  1. All-optical conditional logic with a nonlinear photonic crystal nanocavity

    NASA Astrophysics Data System (ADS)

    McCutcheon, Murray W.; Rieger, Georg W.; Young, Jeff F.; Dalacu, Dan; Poole, Philip J.; Williams, Robin L.

    2009-11-01

    We demonstrate tunable frequency-converted light mediated by a χ(2) nonlinear photonic crystal nanocavity. The InP-based cavity supports two closely spaced localized modes near 1550 nm, which are resonantly excited by a 130 fs laser pulse. The cavity is simultaneously irradiated with a nonresonant probe beam, giving rise to rich second-order scattering spectra showing nonlinear mixing of the different resonant and nonresonant components. We highlight the radiation at the sum frequencies of the probe beam and the respective cavity modes. This would be a useful, minimally invasive monitor of the joint occupancy state of multiple cavities in an integrated optical circuit.

  2. Jauch-Piron logics with finiteness conditions

    SciTech Connect

    Rogalewicz, V. )

    1991-04-01

    An event structure (so-called quantum logic) of a quantum mechanical system is commonly assumed to be an orthomodular poset L. A state of such a system is then interpreted as a probability measure on L. It turns out that the orthomodular posets which may potentially serve as logics must have reasonably rich spaces of states. Moreover, the following condition on the state space appears among the axioms of a quantum system: if {Phi} is a state on a logic L, and {Phi}(a) = {Phi}(b) = 1 for some a, b {element of} L, then there is a c {element of} L such that c {le} a, c {le} b, and {Phi}(c) = 1. Such a state is said to be a Jauch-Piron state. If all states on L fulfill this condition, then L is called a Jauch-Piron logic. The condition was originally introduced by Jauch (1968) and Piron (1976). The author investigates unital Jauch-Piron logics with finitely many blocks (maximal Boolean subalgebras). He shows that such a logic is always Boolean, i.e., it represents a purely classical system. In other words, and orthomodular poset must have infinitely many blocks in order to describe a (nonclassical) quantum system.

  3. Fast all-optical switch

    NASA Technical Reports Server (NTRS)

    Shay, Thomas M. (Inventor); Poliakov, Evgeni Y. (Inventor); Hazzard, David A. (Inventor)

    2001-01-01

    An apparatus and method wherein polarization rotation in alkali vapors or other mediums is used for all-optical switching and digital logic and where the rate of operation is proportional to the amplitude of the pump field. High rates of speed are accomplished by Rabi flopping of the atomic states using a continuously operating monochromatic atomic beam as the pump.

  4. All-optical NRZ-to-PRZ format transformer with an injection-locked Fabry-Perot laser diode at unlasing condition

    NASA Astrophysics Data System (ADS)

    Chang, Yung-Cheng; Lin, Yu-Huang; Chen, J. H.; Lin, Gong-Ru

    2004-09-01

    By using an optical nonreturn-to-zero (NRZ) format data-stream to injection-lock an synchronously modulated Fabry-Perot laser diode at below threshold condition (without DC driving current), an output data-stream with pseudo-return-to-zero (PRZ) format can be generated at bit rate of up to 2.488 Gbit/s. Such an NRZ-to-PRZ format transformation is due to the injectionlocking induced gain-switching of the FPLD with the incoming NRZ data. The PRZ data-stream with a maximum on/off extinction ratio of 12.2 dB is obtained under the optical injecting power of -2 dBm and the RF driving power of 24.4 dBm. The best side-mode suppression ratio of 40 dB and the lowest timing jitter of 0.4 ps for the PRZ data-stream are observed. A power penalty of 1.2 dB is measured at a bit-error rate of 10-9 after NRZ-to-PRZ transformation. In application, the demonstration of an all-optical OR logic gate using the FPLD-based NRZ-to-PRZ transformer is also reported.

  5. All-optical analog comparator.

    PubMed

    Li, Pu; Yi, Xiaogang; Liu, Xianglian; Zhao, Dongliang; Zhao, Yongpeng; Wang, Yuncai

    2016-01-01

    An analog comparator is one of the core units in all-optical analog-to-digital conversion (AO-ADC) systems, which digitizes different amplitude levels into two levels of logical '1' or '0' by comparing with a defined decision threshold. Although various outstanding photonic ADC approaches have been reported, almost all of them necessitate an electrical comparator to carry out this binarization. The use of an electrical comparator is in contradiction to the aim of developing all-optical devices. In this work, we propose a new concept of an all-optical analog comparator and numerically demonstrate an implementation based on a quarter-wavelength-shifted distributed feedback laser diode (QWS DFB-LD) with multiple quantum well (MQW) structures. Our results show that the all-optical comparator is very well suited for true AO-ADCs, enabling the whole digital conversion from an analog optical signal (continuous-time signal or discrete pulse signal) to a binary representation totally in the optical domain. In particular, this all-optical analog comparator possesses a low threshold power (several mW), high extinction ratio (up to 40 dB), fast operation rate (of the order of tens of Gb/s) and a step-like transfer function. PMID:27550874

  6. All-optical analog comparator

    PubMed Central

    Li, Pu; Yi, Xiaogang; Liu, Xianglian; Zhao, Dongliang; Zhao, Yongpeng; Wang, Yuncai

    2016-01-01

    An analog comparator is one of the core units in all-optical analog-to-digital conversion (AO-ADC) systems, which digitizes different amplitude levels into two levels of logical ‘1’ or ‘0’ by comparing with a defined decision threshold. Although various outstanding photonic ADC approaches have been reported, almost all of them necessitate an electrical comparator to carry out this binarization. The use of an electrical comparator is in contradiction to the aim of developing all-optical devices. In this work, we propose a new concept of an all-optical analog comparator and numerically demonstrate an implementation based on a quarter-wavelength-shifted distributed feedback laser diode (QWS DFB-LD) with multiple quantum well (MQW) structures. Our results show that the all-optical comparator is very well suited for true AO-ADCs, enabling the whole digital conversion from an analog optical signal (continuous-time signal or discrete pulse signal) to a binary representation totally in the optical domain. In particular, this all-optical analog comparator possesses a low threshold power (several mW), high extinction ratio (up to 40 dB), fast operation rate (of the order of tens of Gb/s) and a step-like transfer function. PMID:27550874

  7. Proposal of ultra-compact NAND/NOR/XNOR all-optical logic gates based on a nonlinear 3x1 multimode interference

    NASA Astrophysics Data System (ADS)

    Tajaldini, Mehdi; Mat Jafri, M. Z.

    2014-05-01

    We present a highly miniaturized multimode interference (MMI) coupler based on nonlinear modal propagation analysis (NMPA) method as a novel design method and potential application for optical NAND, NOR and XNOR logic gates for Boolean logic signal processing devices. Crystalline polydiacetylene is used to allow the appearances of nonlinear effects in low input intensities and ultra- short length to control the MMI coupler as an active device to access light switching due to its high nonlinear susceptibility. We consider a 10x33 μm2 MMI structure with three inputs and one output. Notably, the access facets are single-mode waveguides with sub-micron width. The center input contributes to control the induced light propagation in MMI by intensity variation whereas others could be launched by particular intensity when they are ON and 0 in OFF. Output intensity is analyzed in various sets of inputs to show the capability of Boolean logic gates, the contrast between ON and OFF is calculated on mentioned gates to present the efficiency. Good operation in low intensity and highly miniaturized MMI coupler is observed. Furthermore, nonlinear effects could be realized through the modal interferences. The issue of high insertion loss is addressed with a 3×3 upgraded coupler. Furthermore, the main significant aspect of this paper is simulating an MMI coupler that is launched by three nonlinear inputs, simultaneously, whereas last presents have never studied more than one input in nonlinear regimes.

  8. Simulation of all-optical logic NOR gate based on two-photon absorption with semiconductor optical amplifier-assisted Mach-Zehnder interferometer with the effect of amplified spontaneous emission

    NASA Astrophysics Data System (ADS)

    Kotb, Amer

    2015-05-01

    The performance of an all-optical NOR gate is numerically simulated and investigated. The NOR Boolean function is realized by using a semiconductor optical amplifier (SOA) incorporated in Mach-Zehnder interferometer (MZI) arms and exploiting the nonlinear effect of two-photon absorption (TPA). If the input pulse intensities is adjusting to be high enough, the TPA-induced phase change can be larger than the regular gain-induced phase change and hence support ultrafast operation in the dual rail switching mode. The numerical study is carried out by taking into account the effect of the amplified spontaneous emission (ASE). The dependence of the output quality factor ( Q-factor) on critical data signals and SOAs parameters is examined and assessed. The obtained results confirm that the NOR gate implemented with the proposed scheme is capable of operating at a data rate of 250 Gb/s with logical correctness and high output Q-factor.

  9. Irrelevance and conditioning in first-order probabilistic logic

    SciTech Connect

    Koller, D.; Halpern, J.Y.

    1996-12-31

    First-order probabilistic logic is a powerful knowledge representation language. Unfortunately, deductive reasoning based on the standard semantics for this logic does not support certain desirable patterns of reasoning, such as indifference to irrelevant information or substitution of constants into universal rules. We show that both these patterns rely on a first-order version of probabilistic independence, and provide semantic conditions to capture them. The resulting insight enables us to understand the effect of conditioning on independence, and allows us to describe a procedure for determining when independencies are preserved under conditioning. We apply this procedure in the context of a sound and powerful inference algorithm for reasoning from statistical knowledge bases.

  10. All optical OFDM transmission systems

    NASA Astrophysics Data System (ADS)

    Rhee, June-Koo K.; Lim, Seong-Jin; Kserawi, Malaz

    2011-12-01

    All-optical OFDM data transmission opens up a new realm of advanced optical transmission at extreme data rates, as subcarriers are multiplexed and demultiplexed by all optical discrete Fourier transforms (DFT). This paper reviews the principles of all optical OFDM transmission and its system application techniques, providing the generic ideas and the practical implementation issues to achieve 100Gbps or higher data rates with a spectral efficiency of 1 bps/Hz or better. This paper also include discussions on all-optical OFDM implementation variants such as an AWG-based OFDM multiplexer and demultiplexer, a receiver design without optical sampling, a transmitter design with frequency-locked cw lasers, an OFDM cyclic prefix designs, and a chromatic dispersion mitigation technique.

  11. Simple novel all-optical half-adder

    NASA Astrophysics Data System (ADS)

    Chen, Zhixin

    2010-04-01

    On the basis of Sagnac interferometric structure, a simple novel ultrafast scheme of all-optical half-adder is proposed. The structure comprises two of the same balanced terahertz optical asymmetric demultiplexers (TOADs). One TOAD is utilized to achieve an all-optical XOR gate, which is logic SUM. The other is utilized to obtain an all-optical AND gate, which is logic CARRY. Logical SUM and CARRY are simultaneously realized at 80 Gbit/s. Through numerical analysis, the operating characteristics of the scheme are illustrated at 80 Gbit/s. Furthermore, the carrier recovery time of the semiconductor optical amplifier is no longer a crucial parameter to restrict the operation speed of this scheme.

  12. All-optical encrypted movie.

    PubMed

    Mosso, Fabian; Barrera, John Fredy; Tebaldi, Myrian; Bolognini, Néstor; Torroba, Roberto

    2011-03-14

    We introduce for the first time the concept of an all-optical encrypted movie. This movie joints several encrypted frames corresponding to a time evolving situation employing the same encoding mask. Thanks to a multiplexing operation we compact the encrypted movie information into a single package. But the decryption of this single package implies the existence of cross-talk if we do not adequately pre-process the encoded information before multiplexing. In this regard, we introduce a grating modulation to each encoded image, and then we proceed to multiplexing. After appropriate filtering and synchronizing procedures applied to the multiplexing, we are able to decrypt and to reproduce the movie. This movie is only properly decoded when in possession of the right decoding key. The concept development is carried-out in virtual optical systems, both for the encrypting and the filtering-decrypting stages. Experimental results are shown to confirm our approach. PMID:21445211

  13. All-optical pseudorandom bit sequences generator based on TOADs

    NASA Astrophysics Data System (ADS)

    Sun, Zhenchao; Wang, Zhi; Wu, Chongqing; Wang, Fu; Li, Qiang

    2016-03-01

    A scheme for all-optical pseudorandom bit sequences (PRBS) generator is demonstrated with optical logic gate 'XNOR' and all-optical wavelength converter based on cascaded Tera-Hertz Optical Asymmetric Demultiplexer (TOADs). Its feasibility is verified by generation of return-to-zero on-off keying (RZ-OOK) 263-1 PRBS at the speed of 1 Gb/s with 10% duty radio. The high randomness of ultra-long cycle PRBS is validated by successfully passing the standard benchmark test.

  14. Conditional Logic and Children. (Cornell Critical Thinking Readiness Project, Phase IIC).

    ERIC Educational Resources Information Center

    Ennis, Robert H.; And Others

    From 180 primary children of varied backgrounds half were selected for instruction in conditional logic by means of an audio-tutorial method. At the termination of 15 weekly lessons the experimental students did no better than the control students on our individually-administered conditional logic test ("Smith-Sturgeon Conditional Reasoning…

  15. High speed all optical networks

    NASA Technical Reports Server (NTRS)

    Chlamtac, Imrich; Ganz, Aura

    1990-01-01

    An inherent problem of conventional point-to-point wide area network (WAN) architectures is that they cannot translate optical transmission bandwidth into comparable user available throughput due to the limiting electronic processing speed of the switching nodes. The first solution to wavelength division multiplexing (WDM) based WAN networks that overcomes this limitation is presented. The proposed Lightnet architecture takes into account the idiosyncrasies of WDM switching/transmission leading to an efficient and pragmatic solution. The Lightnet architecture trades the ample WDM bandwidth for a reduction in the number of processing stages and a simplification of each switching stage, leading to drastically increased effective network throughputs. The principle of the Lightnet architecture is the construction and use of virtual topology networks, embedded in the original network in the wavelength domain. For this construction Lightnets utilize the new concept of lightpaths which constitute the links of the virtual topology. Lightpaths are all-optical, multihop, paths in the network that allow data to be switched through intermediate nodes using high throughput passive optical switches. The use of the virtual topologies and the associated switching design introduce a number of new ideas, which are discussed in detail.

  16. All-Optical Switching in Bacteriorhodopsin Based on Excited-State Absorption

    NASA Astrophysics Data System (ADS)

    Roy, Sukhdev

    2008-03-01

    Switching light with light is of tremendous importance for both fundamental and applied science. The advent of nano-bio-photonics has led to the design, synthesis and characterization of novel biomolecules that exhibit an efficient nonlinear optical response, which can be utilized for designing all-optical biomolecular switches. Bacteriorhodopsin (bR) protein found in the purple membrane of Halobacterium halobium has been the focus of intense research due to its unique properties that can also be tailored by physical, chemical and genetic engineering techniques to suit desired applications. The talk would focus on our recent results on all-optical switching in bR and its mutants, based on excited-state absorption, using the pump-probe technique. We would discuss the all-optical control of various features of the switching characteristics such as switching contrast, switching time, switching pump intensity, switched probe profile and phase, and relative phase-shift. Optimized conditions for all-optical switching that include optimized values of the small-signal absorption coefficient (for cw case), the pump pulse width and concentration for maximum switching contrast (for pulsed case), would be presented. We would discuss the desired optimal spectral and kinetic properties for device applications. We would also discuss the application of all-optical switching to design low power all-optical computing devices, such as, spatial light modulators, logic gates and multiplexers and compare their performance with other natural photoreceptors such as pharaonis phoborhodopsin, proteorhodopsin, photoactive yellow protein and the blue light plant photoreceptor phototropin.

  17. All-Optical Logic Gates in Organic Materials

    NASA Technical Reports Server (NTRS)

    Adbeldayem, H. A.; Frazier, D. O.; Witherow, W.; Paley, M. S.; Penn, B.; Banks, E.; Rose, M. Franklin (Technical Monitor)

    2001-01-01

    A picosecond switch made of polydiacetylene thin film coated on the interior of a 50-micron diameter hollow fiber and a nanosecond switch made of a micron thick film of phthalocyanine on glass were developed.

  18. All-optical flip-flop based on coupled SOA-PSW

    NASA Astrophysics Data System (ADS)

    Wang, Lina; Wang, Yongjun; Wu, Chen; Wang, Fu

    2016-07-01

    The semiconductor optical amplifier (SOA) has obvious advantages in all-optical signal processing, because of the simple structure, strong non-linearity, and easy integration. A variety of all-optical signal processing functions, such as all-optical wavelength conversion, all-optical logic gates and all-optical sampling, can be completed by SOA. So the SOA has been widespread concerned in the field of all-optical signal processing. Recently, the polarization rotation effect of SOA is receiving considerable interest, and many researchers have launched numerous research work utilizing this effect. In this paper, a new all-optical flip-flop structure using polarization switch (PSW) based on polarization rotation effect of SOA is presented.

  19. High speed all-optical encryption and decryption using quantum dot semiconductor optical amplifiers

    NASA Astrophysics Data System (ADS)

    Li, Wenbo; Hu, Hongyu; Dutta, Niloy K.

    2013-11-01

    A scheme to realize high speed all-optical encryption and decryption using key-stream generators and an XOR gate based on quantum dot semiconductor optical amplifiers (QD-SOAs) was studied. The key used for encryption and decryption is a high speed all-optical pseudorandom bit sequence (PRBS) which is generated by a linear feedback shift register (LFSR) composed of QD-SOA-based logic XOR and AND gates. Two other kinds of more secure key-stream generators, i.e. cascaded design and parallel design, were also designed and investigated. Nonlinear dynamics including carrier heating and spectral hole-burning in the QD-SOA are taken into account together with the rate equations in order to realize all-optical logic operations. Results show that this scheme can realize all-optical encryption and decryption by using key-stream generators at high speed (~250 Gb/s).

  20. Nanofiber-based all-optical switches

    NASA Astrophysics Data System (ADS)

    Le Kien, Fam; Rauschenbeutel, A.

    2016-01-01

    We study all-optical switches operating on a single four-level atom with the N -type transition configuration in a two-mode nanofiber cavity with a significant length (on the order of 20 mm) and a moderate finesse (on the order of 300) under the electromagnetically induced transparency (EIT) conditions. In our model, the gate and probe fields are the quantum nanofiber-cavity fields excited by weak classical light pulses, and the parameters of the D2 line of atomic cesium are used. We examine two different switching schemes. The first scheme is based on the effect of the presence of a photon in the gate mode on the EIT of the probe mode. The second scheme is based on the use of EIT to store a photon of the gate mode in the population of an appropriate atomic level, which leads to the reduction of the transmission of the field in the probe mode. We investigate the dependencies of the switching contrast on various parameters, such as the cavity length, the mirror reflectivity, and the detunings and powers of the cavity driving field pulses. For a nanofiber cavity with fiber radius of 250 nm, cavity length of 20 mm, and cavity finesse of 313 and a cesium atom at a distance of 200 nm from the fiber surface, we numerically obtain a switching contrast on the order of about 67% for the first scheme and of about 95% for the second scheme. These switching operations require small mean numbers of photons in the nanofiber cavity gate and probe modes.

  1. Polarization encoded all-optical quaternary R-S flip-flop using binary latch

    NASA Astrophysics Data System (ADS)

    Chattopadhyay, Tanay; Roy, Jitendra Nath; Chakraborty, Ajoy Kumar

    2009-04-01

    The developments of different multi-valued logic (MVL) systems have received considerable interests in recent years all over the world. In electronics, efforts have already been made to incorporate multi-valued system in logic and arithmetic data processing. But, very little efforts have been given in realization of MVL with optics. In this paper we present novel designs of certain all-optical circuits that can be used for realizing multi-valued logic functions. Polarization encoded all-optical quaternary (4-valued) R-S flip-flop is proposed and described. Two key circuits (all-optical encoder/decoder and a binary latch) are designed first. They are used to realize quaternary flip-flop in all-optical domain. Here the different quaternary logical states are represented by different polarized state of light. Terahertz Optical Asymmetric Demultiplexer (TOAD) based interferometric switch can take an important role. Computer simulation result confirming described methods and conclusion are given in this paper.

  2. All-Optical Nanomechanical Heat Engine

    NASA Astrophysics Data System (ADS)

    Dechant, Andreas; Kiesel, Nikolai; Lutz, Eric

    2015-05-01

    We propose and theoretically investigate a nanomechanical heat engine. We show how a levitated nanoparticle in an optical trap inside a cavity can be used to realize a Stirling cycle in the underdamped regime. The all-optical approach enables fast and flexible control of all thermodynamical parameters and the efficient optimization of the performance of the engine. We develop a systematic optimization procedure to determine optimal driving protocols. Further, we perform numerical simulations with realistic parameters and evaluate the maximum power and the corresponding efficiency.

  3. All-optical nanomechanical heat engine.

    PubMed

    Dechant, Andreas; Kiesel, Nikolai; Lutz, Eric

    2015-05-01

    We propose and theoretically investigate a nanomechanical heat engine. We show how a levitated nanoparticle in an optical trap inside a cavity can be used to realize a Stirling cycle in the underdamped regime. The all-optical approach enables fast and flexible control of all thermodynamical parameters and the efficient optimization of the performance of the engine. We develop a systematic optimization procedure to determine optimal driving protocols. Further, we perform numerical simulations with realistic parameters and evaluate the maximum power and the corresponding efficiency. PMID:26001001

  4. Simple novel all-optical wavelength converter

    NASA Astrophysics Data System (ADS)

    Chen, Zhixin

    2009-02-01

    Based on Sagnac interferometric structure, a simple novel ultrafast scheme for an all-optical wavelength converter is proposed. The operations of this scheme with a 80-Gbits/s return to zero (RZ) pseudorandom bit sequence (PRBS) are simulated correctly with an output extinction ratio of more than 17.2 dB. Through numerical analysis, by comparison of the performance at 40- and 80-Gbits/s operation, the operating characteristics of the scheme are illustrated. Furthermore, the carrier recovery time of the semiconductor amplifier (SOA) is no longer a crucial parameter to restrict the operation speed of this scheme.

  5. Ultrafast all-optical switching in bacteriorhodopsin

    NASA Astrophysics Data System (ADS)

    Roy, Sukhdev; Singh, C. P.; Reddy, K. P. J.

    2001-04-01

    All-optical switching has been demonstrated in bacteriorhodopsin based on excited-state nonlinear absorption. A probe laser beam at 640 nm corresponding to the O-state absorption maximum is switched due to a strong pulsed pump laser beam at 570 nm, that corresponds to the maximum ground state absorption. We have studied the effect of variation in pulse width and in small signal absorption coefficient on the switching characteristics. The switching time decreases as the pulse width of the pump beam decreases and the small signal absorption coefficient increases. The switching contrast depends mainly on the peak pumping intensity.

  6. All optical binary delta-sigma modulator

    NASA Astrophysics Data System (ADS)

    Sayeh, Mohammad R.; Siahmakoun, Azad

    2005-09-01

    This paper describes a novel A/D converter called "Binary Delta-Sigma Modulator" (BDSM) which operates only with nonnegative signal with positive feedback and binary threshold. This important modification to the conventional delta-sigma modulator makes the high-speed (>100GHz) all-optical implementation possible. It has also the capability to modify its own sampling frequency as well as its input dynamic range. This adaptive feature helps designers to optimize the system performance under highly noisy environment and also manage the power consumption of the A/D converters.

  7. All-optical OFDM network coding scheme for all-optical virtual private communication in PON

    NASA Astrophysics Data System (ADS)

    Li, Lijun; Gu, Rentao; Ji, Yuefeng; Bai, Lin; Huang, Zhitong

    2014-03-01

    A novel optical orthogonal frequency division multiplexing (OFDM) network coding scheme is proposed over passive optical network (PON) system. The proposed scheme for all-optical virtual private network (VPN) does not only improve transmission efficiency, but also realize full-duplex communication mode in a single fiber. Compared with the traditional all-optical VPN architectures, the all-optical OFDM network coding scheme can support higher speed, more flexible bandwidth allocation, and higher spectrum efficiency. In order to reduce the difficulty of alignment for encoding operation between inter-communication traffic, the width of OFDM subcarrier pulse is stretched in our proposed scheme. The feasibility of all-optical OFDM network coding scheme for VPN is verified, and the relevant simulation results show that the full-duplex inter-communication traffic stream can be transmitted successfully. Furthermore, the tolerance of misalignment existing in inter-ONUs traffic is investigated and analyzed for all-optical encoding operation, and the difficulty of pulse alignment is proved to be lower.

  8. GENERAL A Hierarchy of Compatibility and Comeasurability Levels in Quantum Logics with Unique Conditional Probabilities

    NASA Astrophysics Data System (ADS)

    Gerd, Niestegge

    2010-12-01

    In the quantum mechanical Hilbert space formalism, the probabilistic interpretation is a later ad-hoc add-on, more or less enforced by the experimental evidence, but not motivated by the mathematical model itself. A model involving a clear probabilistic interpretation from the very beginning is provided by the quantum logics with unique conditional probabilities. It includes the projection lattices in von Neumann algebras and here probability conditionalization becomes identical with the state transition of the Lüders-von Neumann measurement process. This motivates the definition of a hierarchy of five compatibility and comeasurability levels in the abstract setting of the quantum logics with unique conditional probabilities. Their meanings are: the absence of quantum interference or influence, the existence of a joint distribution, simultaneous measurability, and the independence of the final state after two successive measurements from the sequential order of these two measurements. A further level means that two elements of the quantum logic (events) belong to the same Boolean subalgebra. In the general case, the five compatibility and comeasurability levels appear to differ, but they all coincide in the common Hilbert space formalism of quantum mechanics, in von Neumann algebras, and in some other cases.

  9. All-optical time-stretch digitizer

    NASA Astrophysics Data System (ADS)

    Fard, A. M.; Buckley, B.; Zlatanovic, S.; Brès, C.-S.; Radic, S.; Jalali, B.

    2012-07-01

    We propose and demonstrate an all-optical time-stretch digitizer for real-time capture of ultrafast optical signals, beyond the bandwidths achievable by electronics. This approach uniquely combines four-wave mixing and photonic time-stretch technique to slow down and record high-speed optical signals. As a proof-of-concept, real-time recording of 40-Gb/s non-return-to-zero on-off-keying optical data stream is experimentally demonstrated using a stretch factor of 54 and 1.5-GHz back-end electronic bandwidth. We also report on the observation of dispersion penalty and its mitigation via single-sideband conversion enabled by an optical bandpass filter. Our technique may provide a path to real-time capture of ultrahigh-speed optical data streams.

  10. Use of fuzzy logic for condition monitoring of motor driven machineries

    NASA Astrophysics Data System (ADS)

    Janier, Josefina Barnachea; Zaim Zaharia, M. Fazrin

    2012-06-01

    An intelligent system called Fuzzy Logic is one of the current technologies that allow a description of the desired system behavior using common language. It generalizes the yes-no Boolean logic into numerical value of 1 and 0 but also permits the in between values. This paper presents the use of Fuzzy Logic to determine the unusual increase of vibrations of an induction motor called vibration analysis. Sudden increase of vibrations could be a good indicator of faulty condition of the motor. Based on the vibration characteristics of the motor, a Fuzzy Inference System (FIS) was created. The system classified the motor of the gas distribution pump as `acceptable' of the vibration ranges from 1.8mm/s to 4.5mm/s or `monitor closely' of the vibration ranges from 4.5mm/s to 7.1mm/s respectively. The system enabled an early detection of faults which is very important in maintenance management.

  11. All-Optical Interrogation of Neural Circuits

    PubMed Central

    2015-01-01

    There have been two recent revolutionary advances in neuroscience: First, genetically encoded activity sensors have brought the goal of optical detection of single action potentials in vivo within reach. Second, optogenetic actuators now allow the activity of neurons to be controlled with millisecond precision. These revolutions have now been combined, together with advanced microscopies, to allow “all-optical” readout and manipulation of activity in neural circuits with single-spike and single-neuron precision. This is a transformational advance that will open new frontiers in neuroscience research. Harnessing the power of light in the all-optical approach requires coexpression of genetically encoded activity sensors and optogenetic probes in the same neurons, as well as the ability to simultaneously target and record the light from the selected neurons. It has recently become possible to combine sensors and optical strategies that are sufficiently sensitive and cross talk free to enable single-action-potential sensitivity and precision for both readout and manipulation in the intact brain. The combination of simultaneous readout and manipulation from the same genetically defined cells will enable a wide range of new experiments as well as inspire new technologies for interacting with the brain. The advances described in this review herald a future where the traditional tools used for generations by physiologists to study and interact with the brain—stimulation and recording electrodes—can largely be replaced by light. We outline potential future developments in this field and discuss how the all-optical strategy can be applied to solve fundamental problems in neuroscience. SIGNIFICANCE STATEMENT This review describes the nexus of dramatic recent developments in optogenetic probes, genetically encoded activity sensors, and novel microscopies, which together allow the activity of neural circuits to be recorded and manipulated entirely using light. The

  12. Polarization-encoded all-optical quaternary universal inverter and design of multivalued flip-flop

    NASA Astrophysics Data System (ADS)

    Chattopadhyay, Tanay; Roy, Jitendra Nath

    2010-03-01

    Quaternary inverters are the fundamental building blocks of multivalued flip-flops (MVFFs). A novel all-optical quaternary universal inverter circuit with the help of a semiconductor optical amplifier-assisted Sagnac switch is proposed and described. This circuit exploits the polarization properties of light. Different logical states are represented by different polarization states of light. A terahertz optical asymmetric multiplexer-based gate plays an important role here. Numerical simulation results confirming the described method are given. An all-optical circuit for a MVFF (quaternary) with the help of our proposed quaternary universal inverter is also designed, and simulation results are presented.

  13. All-optical steering of the interactions between multiple spatial solitons in isotropic polymers

    NASA Astrophysics Data System (ADS)

    Yan, Li-fen; Zhang, Dong; Jin, Qing-li; Wang, Hong-cheng; Zhang, Yao-ju

    2010-11-01

    All-optical steering of the nonlinear interactions between multiple spatial solitons can be performed in an isotropic photoisomerization polymer, by propagating an external control beam in perpendicular direction. Fusing, giving birth to another new soliton, and transferring energy can take place in the interactions of signal beams, which can be achieved by changing the incident position of the control beam, the initial relative phase and the power ratio between the signal beams and the control beam. These phenomena are physically explained, and they have significantly potential applications in optical signal readdressing, logic gating, and all-optical switching, etc.

  14. The GALAXIE all-optical FEL project

    SciTech Connect

    Rosenzweig, J. B.; Arab, E.; Andonian, G.; Cahill, A.; Fitzmorris, K.; Fukusawa, A.; Hoang, P.; Jovanovic, I.; Marcus, G.; Marinelli, A.; Murokh, A.; Musumeci, P.; Naranjo, B.; O'Shea, B.; O'Shea, F.; Ovodenko, A.; Pogorelsky, I.; Putterman, S.; Roberts, K.; Shumail, M.; and others

    2012-12-21

    We describe a comprehensive project, funded under the DARPA AXiS program, to develop an all-optical table-top X-ray FEL based on dielectric acceleration and electromagnetic undulators, yielding a compact source of coherent X-rays for medical and related applications. The compactness of this source demands that high field (>GV/m) acceleration and undulation-inducing fields be employed, thus giving rise to the project's acronym: GV/m AcceLerator And X-ray Integrated Experiment (GALAXIE). There are numerous physics and technical hurdles to surmount in this ambitious scenario, and the integrated solutions include: a biharmonic photonic TW structure, 200 micron wavelength electromagnetic undulators, 5 {mu}m laser development, ultra-high brightness magnetized/asymmetric emittance electron beam generation, and SASE FEL operation. We describe the overall design philosophy of the project, the innovative approaches to addressing the challenges presented by the design, and the significant progress towards realization of these approaches in the nine months since project initialization.

  15. All-optical beamlet train generation

    SciTech Connect

    Cary, John; Giacone, Rodolfo; Nieter, Chet; Bruhwiler, David; Esarey, Eric; Fubiani, Gwenael; Leemans, Wim

    2003-05-12

    One of the critical issues for the development of Laser Wake Field Acceleration (LWFA), which has the promise of creating table-top, GeV accelerators, is the loading of beamlets into the accelerating buckets. All optical injection schemes, which include LILAC, beat-wave colliding pulse injection, wave breaking injection, and phase-kick injection, provide a technique for doing so. Although a single bunch can have desirable properties such as energy spread of the order of a few percent, femtosecond duration k and low emittance (<1 mm-mrad), recent simulations show that such methods lead to efficiencies of transfer of plasma wave energy to beam energy that are low compared with conventional RF accelerators when only a single pulse is generated. Our latest simulations show that one can improve on this situation through the generation of a beamlet train. This can occur naturally through phase-kick injection at the front of the train and transverse wave breaking for the trailing pulses. The result is an efficiency improvement of the order of the number of beamlets in the train.

  16. All optical modulator based on silicon resonator

    NASA Astrophysics Data System (ADS)

    Pinhas, Hadar; Bidani, Liron; Baharav, Oded; Sinvani, Moshe; Danino, Meir; Zalevsky, Zeev

    2015-08-01

    In this paper we present an all-optical silicon modulator, where a silicon slab (450 μm) thick is coated on both sides to get a Fabry-Perot resonator for laser beam at wavelength of 1550nm. Most of the modulators discussed in literature, are driven by electrical field rather than by light. We investigate new approaches regarding the dependence of the absorption of the optical signal on the control laser pulse at 532 nm having 5nm pulse width. Our silicon based Fabry-Perot resonator increases the intrinsic c-Si finesse to >10, instead of the uncoated silicon with natural finesse of 2.5. The improved finesse is shown to have significant effect on the modulation depth using a pulsed laser. A modulation of 12dB was attained. The modulation is ascribed to two different effects - The Plasma Dispersion Effect (PDE) and the Thermo- Optic Effect (TOE). The PDE causes increase in the signal absorption in silicon via the absorption of the control laser light. On top of that, the transmission of the signal can decrease dramatically in high finesse resonators due to change in the refractive index due to TOE. The changes in the signal's absorption coefficient and in the refractive index are the result of incremental change in the concentration of free carriers. The TOE gives rise to higher refractive index as opposed to the PDE which triggers a decrease in the refractive index. Finally, tradeoff considerations are presented on how to modify one effect to counter the other one, leading to an optimal device having reduced temperature dependence.

  17. Fault tolerant all-optical router with photorefractive all-optical switch

    NASA Astrophysics Data System (ADS)

    Kaino, Toshiya; Okamoto, Atsushi; Honma, Satoshi

    2003-08-01

    We propose a new type of the fault tolerant all-optical router (FTAR) by using an all-optical switch with photorefractive two-wave mixing. FTAR can detect a cutoff of a main transmitting line and automatically reroute a signal beam from the main line to a backup line. These functions can increase communication reliability of optical wireless. FTAR is composed of ony all-optical devices without any electronic devices or any mechanical operations. In the new type of FTAR, the routing of the signal beam is controlled by a control beam transmitting on the main line from a different light source at a receiver in the opposite direction with the signal beam. Compared with the previous type of FTAR composed of two photorefractinve crystals, the new configuration offers the simplification of the construction and high transmission efficiency of the signal beam. In this report, we experiment on the FTAR by usign a BaTiO3 and Ar+ laser whose wavelength is 514.5nm, and confirm the fundamental fucntin of FTAR. We give comparison of the result with the numerical analysis. We also analyze the dependence of the switching time on the input beam intensity of the crystal by a numerical analysis and an experiment.

  18. All-optical multibit address recognition at 20 Gb/s based on TOAD

    NASA Astrophysics Data System (ADS)

    Yan, Yumei; Wu, Jian; Lin, Jintong

    2005-04-01

    All-optical multibit address recognition at 20 Gb/s is demonstrated based on a special AND logic of terahertz optical asymmetric demultiplexer (TOAD). The semiconductor optical amplifier (SOA) used in the TOAD is biased at transparency status to accelerate the gain recovery. This is the highest bit rate that multibit address recognition is demonstrated with SOA-based interferometer. The experimental results show low pattern dependency. With this method, address recognition can be performed without separating address and payload beforehand.

  19. All-optical generation of surface plasmons in graphene

    NASA Astrophysics Data System (ADS)

    Constant, T. J.; Hornett, S. M.; Chang, D. E.; Hendry, E.

    2016-02-01

    Surface plasmons in graphene offer a compelling route to many useful photonic technologies. As a plasmonic material, graphene offers several intriguing properties, such as excellent electro-optic tunability, crystalline stability, large optical nonlinearities and extremely high electromagnetic field concentration. As such, recent demonstrations of surface plasmon excitation in graphene using near-field scattering of infrared light have received intense interest. Here we present an all-optical plasmon coupling scheme which takes advantage of the intrinsic nonlinear optical response of graphene. Free-space, visible light pulses are used to generate surface plasmons in a planar graphene sheet using difference frequency wave mixing to match both the wavevector and energy of the surface wave. By carefully controlling the phase matching conditions, we show that one can excite surface plasmons with a defined wavevector and direction across a large frequency range, with an estimated photon efficiency in our experiments approaching 10-5.

  20. Studies in optical parallel processing. [All optical and electro-optic approaches

    NASA Technical Reports Server (NTRS)

    Lee, S. H.

    1978-01-01

    Threshold and A/D devices for converting a gray scale image into a binary one were investigated for all-optical and opto-electronic approaches to parallel processing. Integrated optical logic circuits (IOC) and optical parallel logic devices (OPA) were studied as an approach to processing optical binary signals. In the IOC logic scheme, a single row of an optical image is coupled into the IOC substrate at a time through an array of optical fibers. Parallel processing is carried out out, on each image element of these rows, in the IOC substrate and the resulting output exits via a second array of optical fibers. The OPAL system for parallel processing which uses a Fabry-Perot interferometer for image thresholding and analog-to-digital conversion, achieves a higher degree of parallel processing than is possible with IOC.

  1. Pausing and activating thread state upon pin assertion by external logic monitoring polling loop exit time condition

    DOEpatents

    Chen, Dong; Giampapa, Mark; Heidelberger, Philip; Ohmacht, Martin; Satterfield, David L; Steinmacher-Burow, Burkhard; Sugavanam, Krishnan

    2013-05-21

    A system and method for enhancing performance of a computer which includes a computer system including a data storage device. The computer system includes a program stored in the data storage device and steps of the program are executed by a processer. The processor processes instructions from the program. A wait state in the processor waits for receiving specified data. A thread in the processor has a pause state wherein the processor waits for specified data. A pin in the processor initiates a return to an active state from the pause state for the thread. A logic circuit is external to the processor, and the logic circuit is configured to detect a specified condition. The pin initiates a return to the active state of the thread when the specified condition is detected using the logic circuit.

  2. High speed all-optical PRBS generation using binary phase shift keyed signal based on QD-SOA

    NASA Astrophysics Data System (ADS)

    Li, Wenbo; Hu, Hongyu; Dutta, Niloy K.

    2014-09-01

    A scheme to generate return-to-zero on-off keying (RZ-OOK) high speed all-optical pseudo random bit sequence (PRBS) using binary phase shift keyed (BPSK) signal based on quantum-dot semiconductor optical amplifiers (QD-SOA) has been designed and studied. The PRBS is generated by a linear feedback shift register (LFSR) composed of all-optical logic XOR and AND gates. The XOR gate is composed of a pair of QD SOA Mach-Zehnder interferometers, which can generate BSPK signal to realize all-optical logic XOR gate. Results show that this scheme can mitigate the patterning effects and increase the operation speed to ~250Gb/s.

  3. All-optical switching characteristics in bacteriorhodopsin and its applications in integrated optics.

    PubMed

    Huang, Yuhua; Wu, Shin-Tson; Zhao, Youyuan

    2004-03-01

    We experimentally and theoretically investigated the optical switching characteristics of bacteriorhodopsin (bR) at lambda=633 nm using the pump-probe method. A diode-pumped second harmonic YAG laser (lambda=532 nm which is located around the maximum initial Br state absorption) was used as a pumping beam and a cw He-Ne laser (lambda=633 nm which is around the peaks of K and O states) was used as a probe. Due to the nonlinear intensity induced excited state absorption of the K, L, M, N, and O states in the bR photocycle, the switching characteristics are sensitive to the intensity of the probe and pump beams. Based on this property, we have demonstrated an all-optical device functioning as 11 kinds of variable binary all-optical logic gates. PMID:19474900

  4. All-optical switching characteristics in bacteriorhodopsin and its applications in integrated optics

    NASA Astrophysics Data System (ADS)

    Huang, Yuhua; Wu, Shin-Tson; Zhao, Youyuan

    2004-03-01

    We experimentally and theoretically investigated the optical switching characteristics of bacteriorhodopsin (bR) at l=633 nm using the pump-probe method. A diode-pumped second harmonic YAG laser (l=532 nm which is located around the maximum initial Br state absorption) was used as a pumping beam and a cw He-Ne laser (l=633 nm which is around the peaks of K and O states) was used as a probe. Due to the nonlinear intensity induced excited state absorption of the K, L, M, N, and O states in the bR photocycle, the switching characteristics are sensitive to the intensity of the probe and pump beams. Based on this property, we have demonstrated an all-optical device functioning as 11 kinds of variable binary all-optical logic gates.

  5. All-optical repetition rate multiplication of pseudorandom bit sequences based on cascaded TOADs

    NASA Astrophysics Data System (ADS)

    Sun, Zhenchao; Wang, Zhi; Wu, Chongqing; Wang, Fu; Li, Qiang

    2016-03-01

    A scheme for all-optical repetition rate multiplication of pseudorandom bit sequences (PRBS) is demonstrated with all-optical wavelength conversion and optical logic gate 'OR' based on cascaded Tera-Hertz Optical Asymmetric Demultiplexers (TOADs). Its feasibility is verified by multiplication experiments from 500 Mb/s to 4 Gb/s for 23-1 PRBS and from 1 Gb/s to 4 Gb/s for 27-1 PRBS. This scheme can be employed for rate multiplication for much longer cycle PRBS at much higher bit rate over 40 Gb/s when the time-delay, the loss and the dispersion of the optical delay line are all precisely managed. The upper limit of bit rate will be restricted by the recovery time of semiconductor optical amplifier (SOA) finally.

  6. An Adaptive Fuzzy-Logic Traffic Control System in Conditions of Saturated Transport Stream.

    PubMed

    Yusupbekov, N R; Marakhimov, A R; Igamberdiev, H Z; Umarov, Sh X

    2016-01-01

    This paper considers the problem of building adaptive fuzzy-logic traffic control systems (AFLTCS) to deal with information fuzziness and uncertainty in case of heavy traffic streams. Methods of formal description of traffic control on the crossroads based on fuzzy sets and fuzzy logic are proposed. This paper also provides efficient algorithms for implementing AFLTCS and develops the appropriate simulation models to test the efficiency of suggested approach. PMID:27517081

  7. An Adaptive Fuzzy-Logic Traffic Control System in Conditions of Saturated Transport Stream

    PubMed Central

    Marakhimov, A. R.; Igamberdiev, H. Z.; Umarov, Sh. X.

    2016-01-01

    This paper considers the problem of building adaptive fuzzy-logic traffic control systems (AFLTCS) to deal with information fuzziness and uncertainty in case of heavy traffic streams. Methods of formal description of traffic control on the crossroads based on fuzzy sets and fuzzy logic are proposed. This paper also provides efficient algorithms for implementing AFLTCS and develops the appropriate simulation models to test the efficiency of suggested approach. PMID:27517081

  8. Ultrafast all-optical NOR gate based on semiconductor optical amplifier and fiber delay interferometer

    NASA Astrophysics Data System (ADS)

    Xu, Jing; Zhang, Xinliang; Liu, Deming; Huang, Dexiu

    2006-10-01

    An ultrafast all-optical logic NOR gate based on a semiconductor optical amplifier (SOA) and a fiber delay interferometer (FDI) is presented. For high-speed input return-to-zero (RZ) signal, nonreturn-to-zero (NRZ) switching windows which satisfy Boolean NOR operation can be formed by properly choosing the delay time and the phase shift of FDI. 40Gb/s NOR operation has been demonstrated successfully with low control optical power. The factors that degrade the NOR operation have been discussed.

  9. Thermal lens and all optical switching of new organometallic compound doped polyacrylamide gel

    NASA Astrophysics Data System (ADS)

    Badran, Hussain Ali

    In this work thermal lens spectrometry (TLS) is applied to investigate the thermo-optical properties of new organometallic compound containing azomethine group, Dichloro bis [2-(2-hydroxybenzylideneamino)-5-methylphenyl] telluride platinum(II), doped polyacrylamide gel using transistor-transistor logic (TTL) modulated cw 532 nm laser beam as an excitation beam modulated at 10 Hz frequency and probe beam wavelength 635 nm at 14 mW. The technique is applied to determine the thermal diffusivities, ds/dT and the linear thermal expansion coefficient of the sample. All-optical switching effects with low background and high stability are demonstrated.

  10. All-optical signal processing using dynamic Brillouin gratings

    NASA Astrophysics Data System (ADS)

    Santagiustina, Marco; Chin, Sanghoon; Primerov, Nicolay; Ursini, Leonora; Thévenaz, Luc

    2013-04-01

    The manipulation of dynamic Brillouin gratings in optical fibers is demonstrated to be an extremely flexible technique to achieve, with a single experimental setup, several all-optical signal processing functions. In particular, all-optical time differentiation, time integration and true time reversal are theoretically predicted, and then numerically and experimentally demonstrated. The technique can be exploited to process both photonic and ultra-wide band microwave signals, so enabling many applications in photonics and in radio science.

  11. All-optical signal processing using dynamic Brillouin gratings

    PubMed Central

    Santagiustina, Marco; Chin, Sanghoon; Primerov, Nicolay; Ursini, Leonora; Thévenaz, Luc

    2013-01-01

    The manipulation of dynamic Brillouin gratings in optical fibers is demonstrated to be an extremely flexible technique to achieve, with a single experimental setup, several all-optical signal processing functions. In particular, all-optical time differentiation, time integration and true time reversal are theoretically predicted, and then numerically and experimentally demonstrated. The technique can be exploited to process both photonic and ultra-wide band microwave signals, so enabling many applications in photonics and in radio science. PMID:23549159

  12. All-optical wavelength conversion for mode division multiplexed superchannels.

    PubMed

    Gong, Jiaxin; Xu, Jing; Luo, Ming; Li, Xiang; Qiu, Ying; Yang, Qi; Zhang, Xinliang; Yu, Shaohua

    2016-04-18

    We report in this work the first all-optical wavelength conversion (AOWC) of a mode division multiplexed (MDM) superchannel consisting of 2N modes by dividing the superchannel into N single-mode (SM) tributaries, wavelength converting N SM signals using well developed SM-AOWC techniques, and finally combining the N SM tributaries back to an MDM superchannel at the converted wavelength, inspired by the idea of using SM filtering techniques to filter multimode signals in astronomy. The conversions between multimode and SM are realized by 3D laser-writing photonic lanterns and SM-AOWCs are realized based on polarization insensitive four wave mixing (FWM) configuration in N semiconductor optical amplifiers (SOAs). As a proof of concept demonstration, the conversion of a 6-mode MDM superchannel with each mode modulated with orthogonal frequency division multiplexed (OFDM) quadrature phase-shift keying (QPSK)/16 quadrature amplitude modulation (QAM) signals is demonstrated in this work, indicating that the scheme is transparent to data format, polarization and compatible with multi-carrier signals. Data integrity of the converted superchannel has been verified by using coherent detection and digital signal processing (DSP). Bit error rates (BERs) below the forward error correction (FEC) hard limit (3.8 × 10-3) have been obtained for QPSK modulation at a net bitrate of 104.2 Gbit/s and BERs below the soft decision FEC threshold (1.98 × 10-2) have been achieved for 16-QAM format, giving a total aggregate bit rate of 185.8 Gbit/s when taking 20% coding overhead into account. Add and drop functionalities that usually come along with wavelength conversion in flexible network nodes have also been demonstrated. The working conditions of the SOAs, especially the pump and signal power levels, are critical for the quality of the converted signal and have been thoroughly discussed. The impact of imbalanced FWM conversion efficiency among different SM

  13. All-optical broadband ultrasonography of single cells

    PubMed Central

    Dehoux, T.; Ghanem, M. Abi; Zouani, O. F.; Rampnoux, J.-M.; Guillet, Y.; Dilhaire, S.; Durrieu, M.-C.; Audoin, B.

    2015-01-01

    Cell mechanics play a key role in several fundamental biological processes, such as migration, proliferation, differentiation and tissue morphogenesis. In addition, many diseased conditions of the cell are correlated with altered cell mechanics, as in the case of cancer progression. For this there is much interest in methods that can map mechanical properties with a sub-cell resolution. Here, we demonstrate an inverted pulsed opto-acoustic microscope (iPOM) that operates in the 10 to 100 GHz range. These frequencies allow mapping quantitatively cell structures as thin as 10 nm and resolving the fibrillar details of cells. Using this non-invasive all-optical system, we produce high-resolution images based on mechanical properties as the contrast mechanisms, and we can observe the stiffness and adhesion of single migrating stem cells. The technique should allow transferring the diagnostic and imaging abilities of ultrasonic imaging to the single-cell scale, thus opening new avenues for cell biology and biomaterial sciences. PMID:25731090

  14. All-optical broadband ultrasonography of single cells

    NASA Astrophysics Data System (ADS)

    Dehoux, T.; Ghanem, M. Abi; Zouani, O. F.; Rampnoux, J.-M.; Guillet, Y.; Dilhaire, S.; Durrieu, M.-C.; Audoin, B.

    2015-03-01

    Cell mechanics play a key role in several fundamental biological processes, such as migration, proliferation, differentiation and tissue morphogenesis. In addition, many diseased conditions of the cell are correlated with altered cell mechanics, as in the case of cancer progression. For this there is much interest in methods that can map mechanical properties with a sub-cell resolution. Here, we demonstrate an inverted pulsed opto-acoustic microscope (iPOM) that operates in the 10 to 100 GHz range. These frequencies allow mapping quantitatively cell structures as thin as 10 nm and resolving the fibrillar details of cells. Using this non-invasive all-optical system, we produce high-resolution images based on mechanical properties as the contrast mechanisms, and we can observe the stiffness and adhesion of single migrating stem cells. The technique should allow transferring the diagnostic and imaging abilities of ultrasonic imaging to the single-cell scale, thus opening new avenues for cell biology and biomaterial sciences.

  15. An approach toward the holy grail in all-optical circuit switching: the monster all-optical crossconnect

    NASA Astrophysics Data System (ADS)

    Riza, Nabeel A.; Mughal, M. J.

    2003-12-01

    A new robust approach is presented for achieving very large fiber port count all-optical crossconnect switches. This three dimensional optics-based switch has built-in alignment capabilities with fault-tolerance, allowing graceful port count scaling.

  16. All-Optical Half-Adder Using All-Optical XOR and AND Gates for Optical Generation of "Sum" and "Carry"

    NASA Astrophysics Data System (ADS)

    Menezes, J. W. M.; Fraga, W. B.; Ferreira, A. C.; Guimarães, G. F.; Filho, A. F. G. F.; Sobrinho, C. S.; Sombra, A. S. B.

    2010-07-01

    In this article, a numerical simulation study using the symmetric planar three-core non-linear directional coupler, operating with a short light pulse (2 ps), for the implementation of an all-optical half-adder is presented. The half-adder is the key building block for many digital processing functions such as shift register, binary counter, and serial parallel data converters. Optical couplers are an important component for application in optical fiber telecommunication systems and all integrated optical circuits because of very high switching speeds (as high as the femto-second range). In this numerical simulation, the symmetric planar three-core non-linear directional coupler presents a planar symmetrical structure with three cores in a parallel equidistant arrangement, three logical inputs (CP, A, and B), and two output logic functions (C and S). The CP(ΔΦ) input is a control pulse with a phase difference ΔΦ = Δθπ (0 ≤ Δθ ≤ 2) between inputs A and B (logical inputs of the half-adder) and one amplitude discriminator circuit. The half-adder uses two output logic functions of Sum(S) and Carry(C), which can be demonstrated by using XOR and AND gates, respectively. For the half-adder, the phase [ΔΦMIN, ΔΦMAX] intervals are studied, allowing the operation of the device as a half-adder. For the selected range of CP(ΔΦBETTER), the extinction ratio was studied, the compression factors for both Sum(S) and Carry(C) outputs of the symmetric planar three-core non-linear directional coupler.

  17. All-optical signal processing technique for secure optical communication

    NASA Astrophysics Data System (ADS)

    Qian, Feng-chen; Su, Bing; Ye, Ya-lin; Zhang, Qian; Lin, Shao-feng; Duan, Tao; Duan, Jie

    2015-10-01

    Secure optical communication technologies are important means to solve the physical layer security for optical network. We present a scheme of secure optical communication system by all-optical signal processing technique. The scheme consists of three parts, as all-optical signal processing unit, optical key sequence generator, and synchronous control unit. In the paper, all-optical signal processing method is key technology using all-optical exclusive disjunction (XOR) gate based on optical cross-gain modulation effect, has advantages of wide dynamic range of input optical signal, simple structure and so on. All-optical XOR gate composed of two semiconductor optical amplifiers (SOA) is a symmetrical structure. By controlling injection current, input signal power, delay and filter bandwidth, the extinction ratio of XOR can be greater than 8dB. Finally, some performance parameters are calculated and the results are analyzed. The simulation and experimental results show that the proposed method can be achieved over 10Gbps optical signal encryption and decryption, which is simple, easy to implement, and error-free diffusion.

  18. Study on all-optical switching characteristics of ethyl orange-doped polymer film

    NASA Astrophysics Data System (ADS)

    Xu, Tang; Zhang, Chunping; Lin, Yu; Qi, Shengwen

    2008-10-01

    The all-optical switching polymer thin films with azobenzene dye ethyl orange as the guest material and polyvinyl alcohol (PVA) as the host material were prepared by adulteration and spin-coating methods. The all-optical switching characteristics of the samples were measured at different intensities and modulation frequencies of the pump beam (532 nm, CW); the influence of doping concentration on the all-optical switching effect of the films was studied. It is shown that, under room temperature conditions and with a low pump power of 6 mW, the all-optical switch has a response time of about 2 ms and a modulation depth of 45%, and the maximal modulation depth reaches 90%. In addition, it is found that samples with higher doping concentration show a stronger all-optical switching effect but a larger background signal, and good switching performance is obtained by choosing the doping concentrations from 0.8% to 2% of the sample.

  19. All-Optical Helicity Dependent Spin Switching in a Many-Spin System

    NASA Astrophysics Data System (ADS)

    Latta, Tanner; Zhang, G. P.

    All-optical helicity dependent magnetic switching (AOS) is achieved through using an ultrafast laser pulse to manipulate and switch the spin of an electron from one direction to another. This process happens in a short amount of femtoseconds after the laser pulse is introduced. All-optical helicity dependent magnetic switching (AOS) does not fall to the assistance of any external magnetic field. Linearly polarized light, as well as right and left circularly polarized light are used to manipulate the spin of the electrons. Ferrimagnetic, rather than ferromagnetic, materials are more suitable to create conditions in which AOS are viable due to the orientation of the spins within this material. In the following study we show and conclude that AOS is possible with the use of left and right circularly polarized laser pulses. All-optical helicity dependent magnetic switching has many applications in magnetic recording technology or magnetic memory devices. DE-FG02-06ER46304.

  20. Novel real-time monitoring technique of the all-optical poling process

    NASA Astrophysics Data System (ADS)

    Apostoluk, Aleksandra; Chapron, David; Sahraoui, Bouchta; Gadret, Gregory; Fiorini-Debuisschert, Celine; Raimond, Paul; Nunzi, Jean-Michel

    2002-03-01

    All-optical poling technique permits purely optical orientation of molecules. The experiment consists of two steps: the writing (so-called seeding) period and the readout one. In the seeding phase two beams, the fundamental one ((omega) ) and its second harmonic (SH, 2(omega) ) illuminate the sample and print in the medium the second order (chi) (2) susceptibility grating with a periodicity satisfying the condition of phase matching for SH generation. In the readout period only the fundamental beam irradiates the sample, and the second harmonic generation is observed at the sample output. Efficient all-optical poling requires optimisation of the seeding beam intensities and their relative phase difference. We propose a novel technique for non-perturbative monitoring of the all-optical poling process and the easy method of orienting molecules without any necessity of taking into account the phase difference between seeding beams.

  1. High contrast all-optical diode based on direction-dependent optical bistability within asymmetric ring cavity

    NASA Astrophysics Data System (ADS)

    Xia, Xiu-Wen; Zhang, Xin-Qin; Xu, Jing-Ping; Yang, Ya-Ping

    2016-08-01

    We propose a simple all-optical diode which is comprised of an asymmetric ring cavity containing a two-level atomic ensemble. Attributed to spatial symmetry breaking of the ring cavity, direction-dependent optical bistability is obtained in a classical bistable system. Therefore, a giant optical non-reciprocity is generated, which guarantees an all-optical diode with a high contrast up to 22 dB. Furthermore, its application as an all-optical logic AND gate is also discussed. Project supported by the National Natural Science Foundation of China (Grant Nos. 11274242, 11474221, and 11574229), the Joint Fund of the National Natural Science Foundation of China and the China Academy of Engineering Physics (Grant No. U1330203), and the National Key Basic Research Special Foundation of China (Grant Nos. 2011CB922203 and 2013CB632701).

  2. Photonic temporal integrator for all-optical computing.

    PubMed

    Slavík, Radan; Park, Yongwoo; Ayotte, Nicolas; Doucet, Serge; Ahn, Tae-Jung; LaRochelle, Sophie; Azaña, José

    2008-10-27

    We report the first experimental realization of an all-optical temporal integrator. The integrator is implemented using an all-fiber active (gain-assisted) filter based on superimposed fiber Bragg gratings made in an Er-Yb co-doped optical fiber that behaves like an 'optical capacitor'. Functionality of this device was tested by integrating different optical pulses, with time duration down to 60 ps, and by integration of two consecutive pulses that had different relative phases, separated by up to 1 ns. The potential of the developed device for implementing all-optical computing systems for solving ordinary differential equations was also experimentally tested. PMID:18958098

  3. Bufferless Ultra-High Speed All-Optical Packet Routing

    NASA Astrophysics Data System (ADS)

    Muttagi, Shrihari; Prince, Shanthi

    2011-10-01

    All-Optical network is still in adolescence to cope up with steep rise in data traffic at the backbone network. Routing of packets in optical network depends on the processing speed of the All-Optical routers, thus there is a need to enhance optical processing to curb the delay in packet forwarding unit. In the proposed scheme, the header processing takes place on fly, therefore processing delay is at its lower limit. The objective is to propose a framework which establishes high data rate transmission with least latency in data routing from source to destination. The Routing table and optical header pulses are converted into Pulse Position (PP) format, thus reducing the complexity and in turn the processing delay. Optical pulse matching is exercised which results in multi-output transmission. This results in ultra-high speed packet forwarding unit. In addition, this proposed scheme includes dispersion compensation unit, which makes the data reliable.

  4. All-optical SOA latch fail-safe alarm system

    NASA Astrophysics Data System (ADS)

    McAulay, Alastair D.

    2004-11-01

    Emergency alarm systems, for example, that switch off critical processes in process plant, are vulnerable to deliberate or accidental sabotage through coupling of electromagnetic pulses (EMP) to wires and/or from sparks due to broken wires. A proposed system significantly reduces vulnerability by using a fast all-optical latch in conjunction with an optical sensor and optical fibers. Sparks cannot be created on breaking an optical beam and electromagnetic field transients have negligible effect on optical signals. The optical latch uses optical semiconductor amplifiers (SOAs) configured to form a flip-flop. The flip-flop latches after the occurrence of an intrusion that may be as short as a few nanoseconds, much faster than most environmental changes occur. Detection of an emergency or any break in connections causes the light to drop, triggering the alarm. Computer simulation shows that the all-optical latch is fast and effective.

  5. All-optical switching in optically induced nonlinear waveguide couplers

    SciTech Connect

    Diebel, Falko Boguslawski, Martin; Rose, Patrick; Denz, Cornelia; Leykam, Daniel; Desyatnikov, Anton S.

    2014-06-30

    We experimentally demonstrate all-optical vortex switching in nonlinear coupled waveguide arrays optically induced in photorefractive media. Our technique is based on multiplexing of nondiffracting Bessel beams to induce various types of waveguide configurations. Using double- and quadruple-well potentials, we demonstrate precise control over the coupling strength between waveguides, the linear and nonlinear dynamics and symmetry-breaking bifurcations of guided light, and a power-controlled optical vortex switch.

  6. Nonlinear fiber applications for ultrafast all-optical signal processing

    NASA Astrophysics Data System (ADS)

    Kravtsov, Konstantin

    In the present dissertation different aspects of all-optical signal processing, enabled by the use of nonlinear fibers, are studied. In particular, we focus on applications of a novel heavily GeO2-doped (HD) nonlinear fiber, that appears to be superior to many other types of nonlinear fibers because of its high nonlinearity and suitability for the use in nonlinear optical loop mirrors (NOLMs). Different functions, such as all-optical switching, thresholding, and wavelength conversion, are demonstrated with the HD fibers in the NOLM configuration. These basic functions are later used for realization of ultrafast time-domain demultiplexers, clock recovery, detectors of short pulses in stealth communications, and primitive elements for analog computations. Another important technology that benefits from the use of nonlinear fiber-based signal processing is optical code-division multiple access (CDMA). It is shown in both theory and experiment that all-optical thresholding is a unique way of improving existing detection methods for optical CDMA. Also, it is the way of implementation of true asynchronous optical spread-spectrum networks, which allows full realization of optical CDMA potential. Some aspects of quantum signal processing and manipulation of quantum states are also studied in this work. It is shown that propagation and collisions of Thirring solitons lead to a substantial squeezing of quantum states, which may find applications for generation of squeezed light.

  7. All-optical switching in silicon-on-insulator photonic wire nano-cavities.

    PubMed

    Belotti, Michele; Galli, Matteo; Gerace, Dario; Andreani, Lucio Claudio; Guizzetti, Giorgio; Md Zain, Ahmad R; Johnson, Nigel P; Sorel, Marc; De La Rue, Richard M

    2010-01-18

    We report on experimental demonstration of all-optical switching in a silicon-on-insulator photonic wire nanocavity operating at telecom wavelengths. The switching is performed with a control pulse energy as low as approximately 0.1 pJ on a cavity device that presents very high signal transmission, an ultra-high quality-factor, almost diffraction-limited modal volume and a footprint of only 5 microm(2). High-speed modulation of the cavity mode is achieved by means of optical injection of free carriers using a nanosecond pulsed laser. Experimental results are interpreted by means of finite-difference time-domain simulations. The possibility of using this device as a logic gate is also demonstrated. PMID:20173973

  8. High speed all-optical data processing in fast semiconductor and optical fiber based devices

    NASA Astrophysics Data System (ADS)

    Sun, Hongzhi

    Future generations of communication systems demand ultra high speed data processing and switching components. Conventional electrical parts have reached their bottleneck both speed-wise and efficiency-wise. The idea of manipulating high speed data in optical domain is gaining more popularity. In this PhD thesis work, we proposed and demonstrated various schemes of all-optical Boolean logic gate at data rate as high as 80Gb/s by using semiconductor optical amplifier (SOA), SOA Mach-Zehnder interferometer (SOA-MZI), highly nonlinear fiber (HNLF) and optical fiber based components. With the invention of quantum dot (QD) based semiconductor devices, speed limit of all optical data processing has a chance to boost up to 250Gb/s. We proposed and simulated QD-SOA based Boolean functions, and their application such as shift register and pseudorandom bit sequence generation (PRBS). Clock and data recovery of high speed data signals has been simulated and demonstrated by injection lock and phase lock loop techniques in a fiber and SOA ring and an optical-electrical (OE) feedback loop.

  9. Ultrafast all-optical technologies for bidirectional optical wireless communications.

    PubMed

    Jin, Xian; Hristovski, Blago A; Collier, Christopher M; Geoffroy-Gagnon, Simon; Born, Brandon; Holzman, Jonathan F

    2015-04-01

    In this Letter, a spherical retro-modulator architecture is introduced for operation as a bidirectional transceiver in passive optical wireless communication links. The architecture uses spherical retroreflection to enable retroreflection with broad directionality (2π steradians), and it uses all-optical beam interaction to enable modulation on ultrafast timescales (120 fs duration). The spherical retro-modulator is investigated from a theoretical standpoint and is fabricated for testing with three glasses, N-BK7, N-LASF9, and S-LAH79. It is found that the S-LAH79 structure provides the optimal refraction and nonlinearity for the desired retroreflection and modulation capabilities. PMID:25831390

  10. In-fiber all-optical fractional differentiator.

    PubMed

    Cuadrado-Laborde, C; Andrés, M V

    2009-03-15

    We demonstrate that an asymmetrical pi phase-shifted fiber Bragg grating operated in reflection can provide the required spectral response for implementing an all-optical fractional differentiator. There are different (but equivalent) ways to design it, e.g., by using different gratings lengths and keeping the same index modulation depth at both sides of the pi phase shift, or vice versa. Analytical expressions were found relating the fractional differentiator order with the grating parameters. The device shows a good accuracy calculating the fractional time derivatives of the complex field of an arbitrary input optical waveform. The introduced concept is supported by numerical simulations. PMID:19282948

  11. Realization of an all optical exciton-polariton router

    NASA Astrophysics Data System (ADS)

    Marsault, Félix; Nguyen, Hai Son; Tanese, Dimitrii; Lemaître, Aristide; Galopin, Elisabeth; Sagnes, Isabelle; Amo, Alberto; Bloch, Jacqueline

    2015-11-01

    We report on the experimental realization of an all optical router for exciton-polaritons. This device is based on the design proposed by Flayac and Savenko [Appl. Phys. Lett. 103, 201105 (2013)], in which a zero-dimensional island is connected through tunnel barriers to two periodically modulated wires of different periods. Selective transmission of polaritons injected in the island, into either of the two wires, is achieved by tuning the energy of the island state across the band structure of the modulated wires. We demonstrate routing of ps polariton pulses using an optical control beam which controls the energy of the island quantum states, thanks to polariton-exciton interactions.

  12. All-optical processing in coherent nonlinear spectroscopy

    SciTech Connect

    Oron, Dan; Dudovich, Nirit; Silberberg, Yaron

    2004-08-01

    In spectroscopy, the fingerprint of a substance is usually comprised of a sequence of spectral lines with characteristic frequencies and strengths. Identification of substances often involves postprocessing, where the measured spectrum is compared with tabulated fingerprint spectra. Here we suggest a scheme for nonlinear spectroscopy, where, through coherent control of the nonlinear process, the information from the entire spectrum can be practically collected into a single coherent entity. We apply this for all-optical analysis of coherent Raman spectra and demonstrate enhanced detection and effective background suppression using coherent processing.

  13. Realization of an all optical exciton-polariton router

    SciTech Connect

    Marsault, Félix; Nguyen, Hai Son; Tanese, Dimitrii; Lemaître, Aristide; Galopin, Elisabeth; Sagnes, Isabelle; Amo, Alberto

    2015-11-16

    We report on the experimental realization of an all optical router for exciton-polaritons. This device is based on the design proposed by Flayac and Savenko [Appl. Phys. Lett. 103, 201105 (2013)], in which a zero-dimensional island is connected through tunnel barriers to two periodically modulated wires of different periods. Selective transmission of polaritons injected in the island, into either of the two wires, is achieved by tuning the energy of the island state across the band structure of the modulated wires. We demonstrate routing of ps polariton pulses using an optical control beam which controls the energy of the island quantum states, thanks to polariton-exciton interactions.

  14. All-optical flip-flop and control methods thereof

    DOEpatents

    Maywar, Drew; Agrawal, Govind P.

    2010-03-23

    Embodiments of the invention pertain to remote optical control of holding beam-type, optical flip-flop devices, as well as to the devices themselves. All-optical SET and RE-SET control signals operate on a cw holding beam in a remote manner to vary the power of the holding beam between threshold switching values to enable flip-flop operation. Cross-gain modulation and cross-polarization modulation processes can be used to change the power of the holding beam.

  15. Vibration modal analysis using all-optical photorefractive processing

    SciTech Connect

    Hale, T.; Telschow, K.

    1996-12-31

    A new experimental method for vibration modal analysis based on all- optical photorefractive processing is presented. The method utilizes an optical lock-in approach to measure phase variations in light scattered from optically rough, continuously vibrating surfaces. In this four-wave mixing technique, all-optical processing refers to mixing the object beam containing the frequency modulation due to vibration with a single frequency modulated pump beam in the photorefractive medium that processes the modulated signals. This allows for simple detection of the conjugate wavefront image at a CCD. The conjugate intensity is shown to be a function of the first-order ordinary Bessel function and linearly dependent on the vibration displacement induced phase. Furthermore, the results demonstrate the unique capabilities of the optical lock-in vibration detection technique to measure vibration signals with very narrow bandwidth (< 1 Hz) and high displacement sensitivity (sub-Angstrom). This narrow bandwidth detection can be achieved over a wide frequency range from the photorefractive response limit to the reciprocal of the photoinduced carrier recombination time. The technique is applied to determine the modal characteristics of a rigidly clamped circular disc from 10 kHz to 100 kHz.

  16. All-optical nonlinear plasmonic ring resonator switches

    NASA Astrophysics Data System (ADS)

    Nozhat, N.; Granpayeh, N.

    2014-11-01

    In this paper, all-optical nonlinear plasmonic ring resonator (PRR) switches containing 90o sharp and smooth bends have been proposed and numerically analyzed by the finite-difference time-domain method. Kerr nonlinear self-phase modulation (SPM) and cross-phase modulation (XPM) effects on the switching performance of the device have been studied. By applying a high-power lightwave, the signal can switch from one port to the other port due to the ON/OFF resonant states of the ring. We have shown that by utilizing the XPM effect, the output power ratio is improved by a factor of 2.5 and the required switching power is 31% of that of the case with only the SPM effect. Moreover, by utilizing sharp bend square-shaped ring resonators, the switching power is 10.4% lower than that of the smooth ones. The nonlinear PRR switches are suitable for application in photonic-integrated circuits as all-optical switches because of their nanoscale size and low required switching power.

  17. All-optical digital 4 × 2 encoder based on 2D photonic crystal ring resonators

    NASA Astrophysics Data System (ADS)

    Moniem, Tamer A.

    2016-04-01

    The photonic crystals draw significant attention to build all-optical logic devices and are considered one of the solutions for the opto-electronic bottleneck via speed and size. The paper presents a novel optical 4 × 2 encoder based on 2D square lattice photonic crystals of silicon rods. The main realization of optical encoder is based on the photonic crystal ring resonator NOR gates. The proposed structure has four logic input ports, two output ports, and two bias input port. The photonic crystal structure has a square lattice of silicon rods with a refractive index of 3.39 in air. The structure has lattice constant 'a' equal to 630 nm and bandgap range from 0.32 to 044. The total size of the proposed 4 × 2 encoder is equal to 35 μm × 35 μm. The simulation results using the dimensional finite difference time domain and Plane Wave Expansion methods confirm the operation and the feasibility of the proposed optical encoder for ultrafast optical digital circuits.

  18. All-optical signal amplifier and distributor using cavity-atom coupling systems

    NASA Astrophysics Data System (ADS)

    Duan, Yafan; Lin, Gongwei; Niu, Yueping; Gong, Shangqing

    2016-05-01

    We report an all-optical signal amplifier and a signal distributor using cavity-atom coupling systems. In this system we couple atoms with an optical cavity and realize the great enhancement of a control laser by the cavity with the help of two high coupling lasers. By this effect, we can use one weak control field to control another strong target field and the intensity changes are linear with our experimental conditions. This can be used as an all-optical signal amplifier, also known as a ‘transphasor’. In our experiment, the gain of the weak field to strong field can be as high as 60. Furthermore, we can realize the distribution of optical signals, if we coordinate multiple cavity-atom coupling systems.

  19. All-optical electromagnetically induced transparency using one-dimensional coupled microcavities.

    PubMed

    Naweed, Ahmer; Goldberg, David; Menon, Vinod M

    2014-07-28

    We report the first experimental realization of all-optical electromagnetically induced transparency (EIT) via a pair of coherently interacting SiO2 microcavities in a one-dimensional SiO2/Si3N4 photonic crystal consisting of a distributed Bragg reflector (DBR). The electromagnetic interactions between the coupled microcavities (CMCs), which possess distinct Q-factors, are controlled by varying the number of embedded SiO2/Si3N4 bilayers in the coupling DBR. In case of weak microcavity interactions, the reflectivity spectrum reveals an all-optical EIT resonance which splits into an Autler-Townes-like resonance under condition of strong microcavity coupling. Our results open up the way for implementing optical analogs of quantum coherence in much simpler one-dimensional structures. We also discuss potential applications of CMCs. PMID:25089499

  20. On the design of reconfigurable ultrafast all-optical NOR and NAND gates using a single quantum-dot semiconductor optical amplifier-based Mach-Zehnder interferometer

    NASA Astrophysics Data System (ADS)

    Dimitriadou, E.; Zoiros, K. E.

    2012-10-01

    The feasibility of implementing reconfigurable ultrafast all-optical NOR and NAND gates by employing a single Mach-Zehnder interferometer (MZI) with quantum-dot semiconductor optical amplifiers (QD-SOAs) is theoretically investigated. The reconfiguration of the scheme that allows conversion from one gate to the other is achieved by simply turning on or off a clock signal, while the complement of one of the data signals is used too as input for both gates. By conducting a numerical simulation, the conditions under which the QD-SOA-based MZI must be adjusted to operate so as to simultaneously ensure an acceptable extinction ratio for the NOR and amplitude modulation for the NAND are specified. This procedure is more demanding than when each gate is considered separately. Nevertheless it is possible to extract technologically realistic and achievable guidelines for the data signals and QD-SOAs characteristics in order for these gates to be jointly designed without modifying the fundamental structure or data driving mode of the MZI switch. In this manner a permissible range and a proper selection of values for the critical performance parameters that is common for these universal logic gates is derived, which enables both of them to be realized with a logically correct and high quality outcome.

  1. All-optical investigation of tunable picosecond magnetization dynamics in ferromagnetic nanostripes with a width down to 50 nm.

    PubMed

    Saha, Susmita; Barman, Saswati; Otani, YoshiChika; Barman, Anjan

    2015-11-21

    Ferromagnetic nanostripes are important elements for a number of interesting technologies including magnetic racetrack memory, spin logic and magnonics. Understanding and controlling magnetization dynamics in such nanostripes are hence important problems in nanoscience and technology. Here we present an all-optical excitation and detection of ultrafast magnetization dynamics, including spin waves, in 5 μm long Ni80Fe20 nanostripes with varying stripe widths from 200 nm down to 50 nm. We observed a strong width dependent variation in the frequency, anisotropy and the spatial nature of spin waves in these systems. The effect of inter-stripe interaction is also studied and the 50 nm wide stripe is found to be nearly magnetostatically isolated, allowing us to detect the dynamics of a 50 nm wide individual stripe using an all-optical measurement technique. The tunability in magnetization dynamics with stripe widths is important for their applications in various spin based technologies. PMID:26488800

  2. Demonstration of all-optical two bit digital comparator using self-locked Fabry-Perot laser diode

    NASA Astrophysics Data System (ADS)

    Nakarmi, Bikash; Rakib-Uddin, M.; Won, Yong Hyub

    2012-02-01

    All-optical two bit digital comparator using single mode Fabry-Perot laser diodes (SMFP-LDs) is proposed and demonstrated with 10 Gbps PRBS signal of 231-1. Digital comparators are one of the important components for decision making circuits, threshold detection, which are used in optical signal processing and optical computing. The basic principle of the comparator is based on injection locking, multi-input injection locking and combinational input injection locking (CMIL) to realize the greater than, less than, and equal to function of the basic comparator circuit. These principles are used to realize the different optical logic gates which are combined together to demonstrate optical comparator with the minimum number of components, making the configuration cheaper and simpler. The proposed method draws less current and hence power effective too. Output waveform diagram and output eye diagram for all three cases of comparator are presented to verify all functions of all-optical comparator.

  3. All-optical investigation of tunable picosecond magnetization dynamics in ferromagnetic nanostripes with a width down to 50 nm

    NASA Astrophysics Data System (ADS)

    Saha, Susmita; Barman, Saswati; Otani, Yoshichika; Barman, Anjan

    2015-10-01

    Ferromagnetic nanostripes are important elements for a number of interesting technologies including magnetic racetrack memory, spin logic and magnonics. Understanding and controlling magnetization dynamics in such nanostripes are hence important problems in nanoscience and technology. Here we present an all-optical excitation and detection of ultrafast magnetization dynamics, including spin waves, in 5 μm long Ni80Fe20 nanostripes with varying stripe widths from 200 nm down to 50 nm. We observed a strong width dependent variation in the frequency, anisotropy and the spatial nature of spin waves in these systems. The effect of inter-stripe interaction is also studied and the 50 nm wide stripe is found to be nearly magnetostatically isolated, allowing us to detect the dynamics of a 50 nm wide individual stripe using an all-optical measurement technique. The tunability in magnetization dynamics with stripe widths is important for their applications in various spin based technologies.

  4. External cavity based single mode Fabry-Pérot laser diode and its application towards all-optical digital circuits

    NASA Astrophysics Data System (ADS)

    Nakarmi, Bikash; Zhang, Xuping; Won, Yong Hyub

    2012-11-01

    We have proposed a novel approach of realizing all-optical logic gates and combinational circuit using external cavity based single mode Fabry-Pérot laser diodes (SMFP-LDs). Different techniques and critical parameters for injection locking the any one of the modes of SMFP-LDs are discussed. Taking consideration of wavelength detuning and input injected power, we have proposed and demonstrated multi-input injection locking, supporting beam injection locking with the conventional injection locking which are used for demonstrating different logic gates (NAND, AND, XNOR, XOR, NOT, NOR) and digital circuits (Half adder and Comparator). Since we have used SMFP-LDs, there is no requirement of additional probe beam and associated components as required by other optical technologies making the realization simple in configuration, cost effective and power efficient. Clear output waveforms, eye diagrams, risingfalling times and BER are presented to verify the proposed method. All-optical logic units and digital circuit are demonstrated at the data rate of 10 Gbps with the waveform of NRZ signal waveform and measured eye diagram and BER of the PRBS of 231-1 signal. The maximum power penalty among all demonstrated units is below 1.4 dB at the BER of 10-9.

  5. Graphene based All-Optical Spatial Terahertz Modulator

    PubMed Central

    Wen, Qi-Ye; Tian, Wei; Mao, Qi; Chen, Zhi; Liu, Wei-Wei; Yang, Qing-Hui; Sanderson, Matthew; Zhang, Huai-Wu

    2014-01-01

    We demonstrate an all-optical terahertz modulator based on single-layer graphene on germanium (GOG), which can be driven by a 1.55 μm CW laser with a low-level photodoping power. Both the static and dynamic THz transmission modulation experiments were carried out. A spectrally wide-band modulation of the THz transmission is obtained in a frequency range from 0.25 to 1 THz, and a modulation depth of 94% can be achieved if proper pump power is applied. The modulation speed of the modulator was measured to be ~200 KHz using a 340 GHz carrier. A theoretical model is proposed for the modulator and the calculation results indicate that the enhanced THz modulation is mainly due to the third order nonlinear effect in the optical conductivity of the graphene monolayer. PMID:25491194

  6. All-optical reservoir computer based on saturation of absorption.

    PubMed

    Dejonckheere, Antoine; Duport, François; Smerieri, Anteo; Fang, Li; Oudar, Jean-Louis; Haelterman, Marc; Massar, Serge

    2014-05-01

    Reservoir computing is a new bio-inspired computation paradigm. It exploits a dynamical system driven by a time-dependent input to carry out computation. For efficient information processing, only a few parameters of the reservoir needs to be tuned, which makes it a promising framework for hardware implementation. Recently, electronic, opto-electronic and all-optical experimental reservoir computers were reported. In those implementations, the nonlinear response of the reservoir is provided by active devices such as optoelectronic modulators or optical amplifiers. By contrast, we propose here the first reservoir computer based on a fully passive nonlinearity, namely the saturable absorption of a semiconductor mirror. Our experimental setup constitutes an important step towards the development of ultrafast low-consumption analog computers. PMID:24921786

  7. All-optical optoacoustic microscope based on wideband pulse interferometry.

    PubMed

    Wissmeyer, Georg; Soliman, Dominik; Shnaiderman, Rami; Rosenthal, Amir; Ntziachristos, Vasilis

    2016-05-01

    Optical and optoacoustic (photoacoustic) microscopy have been recently joined in hybrid implementations that resolve extended tissue contrast compared to each modality alone. Nevertheless, the application of the hybrid technique is limited by the requirement to combine an optical objective with ultrasound detection collecting signal from the same micro-volume. We present an all-optical optoacoustic microscope based on a pi-phase-shifted fiber Bragg grating (π-FBG) with coherence-restored pulsed interferometry (CRPI) used as the interrogation method. The sensor offers an ultra-small footprint and achieved higher sensitivity over piezoelectric transducers of similar size. We characterize the spectral bandwidth of the ultrasound detector and interrogate the imaging performance on phantoms and tissues. We show the first optoacoustic images of biological specimen recorded with π-FBG sensors. We discuss the potential uses of π-FBG sensors based on CRPI. PMID:27128047

  8. High-contrast, all-optical switching in bacteriorhodopsin films

    NASA Astrophysics Data System (ADS)

    Banyal, Ravinder Kumar; Raghavendra Prasad, B.

    2005-09-01

    We report experiments with nonlinear-absorption-based, high-contrast, all-optical switching in photochromic bacteriorhodopsin (BR) films. The switching action is accomplished by control of the transmission of a weak probe beam through a BR sample with the help of strong pump beam illumination at 532 nm wavelength. We found that the switching properties of BR films depend on several experimentally controllable parameters such as probe wavelength, pump beam intensity, and excitation rate. A comparative study of the switching behavior and other parameters of practical use was carried out at three probe wavelengths (543, 594, and 633 nm) and various beam powers and pump excitation rates. The results are presented for commercially available wild-type and D96N variant BR films.

  9. High-contrast, all-optical switching in bacteriorhodopsin films.

    PubMed

    Banyal, Ravinder Kumar; Prasad, B Raghavendra

    2005-09-10

    We report experiments with nonlinear-absorption-based, high-contrast, all-optical switching in photochromic bacteriorhodopsin (BR) films. The switching action is accomplished by control of the transmission of a weak probe beam through a BR sample with the help of strong pump beam illumination at 532 nm wavelength. We found that the switching properties of BR films depend on several experimentally controllable parameters such as probe wavelength, pump beam intensity, and excitation rate. A comparative study of the switching behavior and other parameters of practical use was carried out at three probe wavelengths (543, 594, and 633 nm) and various beam powers and pump excitation rates. The results are presented for commercially available wild-type and D96N variant BR films. PMID:16161665

  10. Generalized model for all-optical light modulation in bacteriorhodopsin

    NASA Astrophysics Data System (ADS)

    Roy, Sukhdev; Singh, C. P.; Reddy, K. P. J.

    2001-10-01

    We present a generalized model for the photochemical cycle of bacteriorhodopsin (bR) protein molecule. Rate equations have been solved for the detailed light-induced processes in bR for its nine states: B→K↔L↔MI→MII↔N↔O↔P→Q→B. The complete steady-state intensity-induced population densities in various states of the molecule have been computed to obtain a general, exact, and analytical expression for the nonlinear absorption coefficient for multiple modulation pump laser beams. All-optical light modulation of different probe laser beam transmissions by intensity induced population changes due to one and two modulation laser beams has been analyzed. The proposed model has been shown to accurately model experimental results.

  11. All-Optical Implementation of the Ant Colony Optimization Algorithm

    NASA Astrophysics Data System (ADS)

    Hu, Wenchao; Wu, Kan; Shum, Perry Ping; Zheludev, Nikolay I.; Soci, Cesare

    2016-05-01

    We report all-optical implementation of the optimization algorithm for the famous “ant colony” problem. Ant colonies progressively optimize pathway to food discovered by one of the ants through identifying the discovered route with volatile chemicals (pheromones) secreted on the way back from the food deposit. Mathematically this is an important example of graph optimization problem with dynamically changing parameters. Using an optical network with nonlinear waveguides to represent the graph and a feedback loop, we experimentally show that photons traveling through the network behave like ants that dynamically modify the environment to find the shortest pathway to any chosen point in the graph. This proof-of-principle demonstration illustrates how transient nonlinearity in the optical system can be exploited to tackle complex optimization problems directly, on the hardware level, which may be used for self-routing of optical signals in transparent communication networks and energy flow in photonic systems.

  12. All-Optical Implementation of the Ant Colony Optimization Algorithm.

    PubMed

    Hu, Wenchao; Wu, Kan; Shum, Perry Ping; Zheludev, Nikolay I; Soci, Cesare

    2016-01-01

    We report all-optical implementation of the optimization algorithm for the famous "ant colony" problem. Ant colonies progressively optimize pathway to food discovered by one of the ants through identifying the discovered route with volatile chemicals (pheromones) secreted on the way back from the food deposit. Mathematically this is an important example of graph optimization problem with dynamically changing parameters. Using an optical network with nonlinear waveguides to represent the graph and a feedback loop, we experimentally show that photons traveling through the network behave like ants that dynamically modify the environment to find the shortest pathway to any chosen point in the graph. This proof-of-principle demonstration illustrates how transient nonlinearity in the optical system can be exploited to tackle complex optimization problems directly, on the hardware level, which may be used for self-routing of optical signals in transparent communication networks and energy flow in photonic systems. PMID:27222098

  13. All-Optical Implementation of the Ant Colony Optimization Algorithm

    PubMed Central

    Hu, Wenchao; Wu, Kan; Shum, Perry Ping; Zheludev, Nikolay I.; Soci, Cesare

    2016-01-01

    We report all-optical implementation of the optimization algorithm for the famous “ant colony” problem. Ant colonies progressively optimize pathway to food discovered by one of the ants through identifying the discovered route with volatile chemicals (pheromones) secreted on the way back from the food deposit. Mathematically this is an important example of graph optimization problem with dynamically changing parameters. Using an optical network with nonlinear waveguides to represent the graph and a feedback loop, we experimentally show that photons traveling through the network behave like ants that dynamically modify the environment to find the shortest pathway to any chosen point in the graph. This proof-of-principle demonstration illustrates how transient nonlinearity in the optical system can be exploited to tackle complex optimization problems directly, on the hardware level, which may be used for self-routing of optical signals in transparent communication networks and energy flow in photonic systems. PMID:27222098

  14. Production and all-optical deceleration of molecular beams

    NASA Astrophysics Data System (ADS)

    Chen, Gary; Jayich, Andrew; Long, Xueping; Ransford, Anthony; Campbell, Wesley

    2015-05-01

    Ultracold molecules open up new opportunities in many areas of study, including many-body physics, quantum chemistry, quantum information, and precision measurements. Current methods cannot easily address the spontaneous decay of molecules into dark states without an amalgam of repump lasers. We present an alternative method to produce cold molecules. A cryogenic buffer gas beam (CBGB) is used to create an intense, slow, cold source of molecules. By using a CBGB for the production, we can quench vibrational modes that cannot be addressed with optical methods. This is then followed by an all-optical scheme using a single ultra-fast laser to decelerate the molecules and a continuous wave laser to cool the species. We have started experiments with strontium monohydride (SrH), but the proposed method should be applicable to a wide range of molecular species.

  15. All-optical phase-preserving multilevel amplitude regeneration.

    PubMed

    Roethlingshoefer, Tobias; Richter, Thomas; Schubert, Colja; Onishchukov, Georgy; Schmauss, Bernhard; Leuchs, Gerd

    2014-11-01

    The possibility of all-optical phase-preserving amplitude regeneration for star-8QAM is demonstrated using a modified nonlinear optical loop mirror. Experiments show a reduction in amplitude noise on both amplitude levels simultaneously, considering two different types of signal distortions: deterministic low-frequency amplitude modulation and broadband amplitude noise. Furthermore, using this amplitude regeneration, the robustness against nonlinear phase noise from fiber nonlinearity in a transmission line is increased. The scheme suppresses the conversion of amplitude noise to nonlinear phase noise. This is shown for simultaneous amplitude regeneration of the two amplitude states as well as for amplitude regeneration of the high-power states only. If the transmission is limited by nonlinear phase noise, single-level operation at the more critical higher-power state will benefit because of the wider plateau region. Numerical simulations confirm the experimental results. PMID:25401858

  16. Self-organized plasmonic metasurfaces for all-optical modulation

    NASA Astrophysics Data System (ADS)

    Della Valle, G.; Polli, D.; Biagioni, P.; Martella, C.; Giordano, M. C.; Finazzi, M.; Longhi, S.; Duò, L.; Cerullo, G.; Buatier de Mongeot, F.

    2015-06-01

    We experimentally demonstrate a self-organized metasurface with a polarization dependent transmittance that can be dynamically controlled by optical means. The configuration consists of tightly packed plasmonic nanowires with a large dispersion of width and height produced by the defocused ion-beam sputtering of a thin gold film supported on a silica glass. Our results are quantitatively interpreted according to a theoretical model based on the thermomodulational nonlinearity of gold and a finite-element numerical analysis of the absorption and scattering cross-sections of the nanowires. We found that the polarization sensitivity of the metasurface can be strongly enhanced by pumping with ultrashort laser pulses, leading to potential applications in ultrafast all-optical modulation and switching of light.

  17. Bandwidth analysis of all-optical turbo-switch

    NASA Astrophysics Data System (ADS)

    Zhou, Peng; Yang, Xuelin; Hu, Xiaonan; Hu, Weisheng

    2015-01-01

    We propose and develop a frequency-domain model to analyze the bandwidth of all-optical turbo-switch. The model has taken the spatial inhomogeneity of semiconductor optical amplifier (SOA) into consideration for the first time. The simulations based on the model show that the 3-dB bandwidth of turbo-switch could reach up to ~270 GHz when the second SOA is oversaturated. However, the overshoot will be higher, which may result in the distortion of the output signal. There is a trade-off between the bandwidth and the flatness of frequency response characteristics for turbo-switch operation. In addition, the optimum position of the delay-interferometer (DI) is investigated, showing that the level of the overshoot is relatively lower if the DI is placed between the two SOAs.

  18. Microscopic model for all optical switching in ferromagnets

    NASA Astrophysics Data System (ADS)

    Cornelissen, T. D.; Córdoba, R.; Koopmans, B.

    2016-04-01

    The microscopic mechanism behind the all optical switching (AOS) in ferromagnets has triggered intense scientific debate. Here, the microscopic three-temperature model is utilized to describe AOS in a perpendicularly magnetized ferromagnetic Co/Pt system. We demonstrate that AOS in such a ferromagnet can be explained with the Inverse Faraday Effect (IFE). The influence of the strength and lifetime of the IFE induced field pulse on the switching process are investigated. We found that because of strong spin-orbit coupling, the minimal lifetime of the IFE needed to obtain switching is of the order of 0.1 ps, which is shorter than previously assumed. Moreover, spatial images of the domain pattern after AOS in Co/Pt, as well as their dependence on applying an opposite magnetic field, are qualitatively reproduced.

  19. All-optical nonlinear holographic correlation using bacteriorhodopsin films

    NASA Astrophysics Data System (ADS)

    Thoma, Ralph; Dratz, Michael; Hampp, Norbert

    1995-05-01

    Films made of the halobacterial photochrome bacteriorhodopsin (BR) can be used in a number of holographic real-time applications. Their application as active material in a dual-axis joint- Fourier-transform (DAJFT) real-time correlator was shown recently. The BR films have a strong nonlinear intensity dependence on the light-induced absorption and refractive-index changes. Therefore the holographic diffraction efficiency also shows a nonlinear dependence on the writing intensity. We investigate the effect of this nonlinearity on the result of the correlation process in a bacteriorhodopsin-based DAJFT correlator. Numerical models supporting the experimental observations are presented. It was found that the BR film combines the holographic function for most objects with that of a spatial bandpass filter, whose center frequency is tuned by the writing intensity. This results in smaller peak widths and a suppression of the sidelobes. BR films allow the application of this nonlinear behavior in real time to the all-optical correlation process.

  20. All-optical active switching in individual semiconductor nanowires

    NASA Astrophysics Data System (ADS)

    Piccione, Brian; Cho, Chang-Hee; van Vugt, Lambert K.; Agarwal, Ritesh

    2012-10-01

    The imminent limitations of electronic integrated circuits are stimulating intense activity in the area of nanophotonics for the development of on-chip optical components, and solutions incorporating direct-bandgap semiconductors are important in achieving this end. Optical processing of data at the nanometre scale is promising for circumventing these limitations, but requires the development of a toolbox of components including emitters, detectors, modulators, waveguides and switches. In comparison to components fabricated using top-down methods, semiconductor nanowires offer superior surface properties and stronger optical confinement. They are therefore ideal candidates for nanoscale optical network components, as well as model systems for understanding optical confinement. Here, we demonstrate all-optical switching in individual CdS nanowire cavities with subwavelength dimensions through stimulated polariton scattering, as well as a functional NAND gate built from multiple switches. The device design exploits the strong light-matter coupling present in these nanowires, leading to footprints that are a fraction of those of comparable silicon-based dielectric contrast and photonic crystal devices.

  1. All-optical photoacoustic microscopy using a MEMS scanning mirror

    NASA Astrophysics Data System (ADS)

    Chen, Sung-Liang; Xie, Zhixing; Ling, Tao; Wei, Xunbin; Guo, L. Jay; Wang, Xueding

    2013-03-01

    It has been studied that a potential marker to obtain prognostic information about bladder cancer is tumor neoangiogenesis, which can be quantified by morphometric characteristics such as microvascular density. Photoacoustic microscopy (PAM) can render sensitive three-dimensional (3D) mapping of microvasculature, providing promise to evaluate the neoangiogenesis that is closely related to the diagnosis of bladder cancer. To ensure good image quality, it is desired to acquire bladder PAM images from its inside via the urethra, like conventional cystoscope. Previously, we demonstrated all-optical PAM systems using polymer microring resonators to detect photoacoustic signals and galvanometer mirrors for laser scanning. In this work, we build a miniature PAM system using a microelectromechanical systems (MEMS) scanning mirror, demonstrating a prototype of an endoscopic PAM head capable of high imaging quality of the bladder. The system has high resolutions of 17.5 μm in lateral direction and 19 μm in the axial direction at a distance of 5.4 mm. Images of printed grids and the 3D structure of microvasculature in animal bladders ex vivo by the system are demonstrated.

  2. All-optical control of ultrafast photocurrents in unbiased graphene

    PubMed Central

    Obraztsov, Petr A.; Kaplas, Tommi; Garnov, Sergey V.; Kuwata-Gonokami, Makoto; Obraztsov, Alexander N.; Svirko, Yuri P.

    2014-01-01

    Graphene has recently become a unique playground for studying light-matter interaction effects in low-dimensional electronic systems. Being of strong fundamental importance, these effects also open a wide range of opportunities in photonics and optoelectronics. In particular, strong and broadband light absorption in graphene allows one to achieve high carrier densities essential for observation of nonlinear optical phenomena. Here, we make use of strong photon-drag effect to generate and optically manipulate ultrafast photocurrents in graphene at room temperature. In contrast to the recent reports on injection of photocurrents in graphene due to external or built-in electric field effects and by quantum interference, we force the massless charge carriers to move via direct transfer of linear momentum from photons of incident laser beam to excited electrons in unbiased sample. Direction and amplitude of the drag-current induced in graphene are determined by polarization, incidence angle and intensity of the obliquely incident laser beam. We also demonstrate that the irradiation of graphene with two laser beams of the same wavelength offers an opportunity to manipulate the photocurrents in time domain. The obtained all-optical control of the photocurrents opens new routes towards graphene based high-speed and broadband optoelectronic devices. PMID:24500084

  3. Quasi-all-optical network extension for submarine cabled observatories

    NASA Astrophysics Data System (ADS)

    Audo, Frederic; Guegan, Mikael; Quintard, Véronique; Perennou, Andre; Le Bihan, Jean; Auffret, Yves

    2011-04-01

    Submarine cabled networks are designed to collect valuable data in geophysics, geochemistry, biology, or oceanography. Unfortunately, the development of such a network is expensive and needs complex subsea infrastructures. Once in place, a cabled network cannot be easily relocated. The current cost of cables and their installation are one of the major obstacles to these networks deployment. On the one hand, these cables are necessary to provide power supply and communication data, and on the other hand they drastically reduce the possibilities to extend the cabled observatory network in order to reach a closed area of significant interest. This is why, to address this issue, we propose a quasi-all-optical architecture to easily extend multidisciplinary cabled networks or to create a dedicated submarine hydrophone or seismometer network. This solution consists of using only a single fiber optic to transmit both the energy, required to supply the instrument, and the data, exchanged between the shore station or equivalent. In this paper, we present our proposed architecture, and we discuss its feasibility thanks to experimental results.

  4. All-optical regulation of gene expression in targeted cells

    NASA Astrophysics Data System (ADS)

    Wang, Yisen; He, Hao; Li, Shiyang; Liu, Dayong; Lan, Bei; Hu, Minglie; Cao, Youjia; Wang, Chingyue

    2014-06-01

    Controllable gene expression is always a challenge and of great significance to biomedical research and clinical applications. Recently, various approaches based on extra-engineered light-sensitive proteins have been developed to provide optogenetic actuators for gene expression. Complicated biomedical techniques including exogenous genes engineering, transfection, and material delivery are needed. Here we present an all-optical method to regulate gene expression in targeted cells. Intrinsic or exogenous genes can be activated by a Ca2+-sensitive transcription factor nuclear factor of activated T cells (NFAT) driven by a short flash of femtosecond-laser irradiation. When applied to mesenchymal stem cells, expression of a differentiation regulator Osterix can be activated by this method to potentially induce differentiation of them. A laser-induced ``Ca2+-comb'' (LiCCo) by multi-time laser exposure is further developed to enhance gene expression efficiency. This noninvasive method hence provides an encouraging advance of gene expression regulation, with promising potential of applying in cell biology and stem-cell science.

  5. Flexible all-optical frequency allocation of OFDM subcarriers.

    PubMed

    Lowery, Arthur James; Schröder, Jochen; Du, Liang B

    2014-01-13

    We investigate the underlying mechanism that allows OFDM subcarriers in an all-optical OFDM system to be assigned to any optical frequency using an optical filter, even if that frequency is not generated by the comb-line source feeding the filters. We confirm our analysis using simulations, and present experimental results from a 252-subcarrier system that uses a mode-locked laser (MLL) as the comb source and a wavelength selective switch. The experimental results show that there is no correlation between the programmed frequency offset between a subcarrier and nearest comb line, and the received signal quality. Thus, subcarriers could be inserted into unused portions of an optical transmission system's spectrum without restriction on their particular center frequencies. Any percentage of cyclic prefix can be added to the OFDM symbol simply by reprogramming the optical filter to give wider subcarrier frequency spacing than the comb line spacing, which is useful for tailoring the CP to the dispersion of various optical transmission paths, to maximize the spectral efficiency. Finally, the MLL's center frequency need not be locked to a system reference. PMID:24515064

  6. Spin-based all-optical quantum computation with quantum dots: Understanding and suppressing decoherence

    SciTech Connect

    Calarco, T.; Datta, A.; Fedichev, P.; Zoller, P.; Pazy, E.

    2003-07-01

    We present an all-optical implementation of quantum computation using semiconductor quantum dots. Quantum memory is represented by the spin of an excess electron stored in each dot. Two-qubit gates are realized by switching on trion-trion interactions between different dots. State selectivity is achieved via conditional laser excitation exploiting Pauli exclusion principle. Read out is performed via a quantum-jump technique. We analyze the effect on our scheme's performance of the main imperfections present in real quantum dots: exciton decay, hole mixing, and phonon decoherence. We introduce an adiabatic gate procedure that allows one to circumvent these effects and evaluate quantitatively its fidelity.

  7. All-optical athermalization of infrared imaging systems using thermally dependent binary phase masks

    NASA Astrophysics Data System (ADS)

    Elmalem, Shay; Marom, Emanuel

    2016-06-01

    Lenses used in many infrared (IR) imaging systems are temperature sensitive. One of the most popular IR optical materials for lens fabrication is germanium; nevertheless, it exhibits a strong temperature dependent refractive index, causing significant thermal focal shift which in turn results in image blur. An all-optical solution for IR lens athermalization with no moving parts based on a thermally dependent binary phase mask is hereby proposed and analyzed. It allows high quality imaging to be obtained for a wide range of temperature variations, with minimal performance degradation at nominal temperature conditions.

  8. Fuzzy Logic Engine

    NASA Technical Reports Server (NTRS)

    Howard, Ayanna

    2005-01-01

    The Fuzzy Logic Engine is a software package that enables users to embed fuzzy-logic modules into their application programs. Fuzzy logic is useful as a means of formulating human expert knowledge and translating it into software to solve problems. Fuzzy logic provides flexibility for modeling relationships between input and output information and is distinguished by its robustness with respect to noise and variations in system parameters. In addition, linguistic fuzzy sets and conditional statements allow systems to make decisions based on imprecise and incomplete information. The user of the Fuzzy Logic Engine need not be an expert in fuzzy logic: it suffices to have a basic understanding of how linguistic rules can be applied to the user's problem. The Fuzzy Logic Engine is divided into two modules: (1) a graphical-interface software tool for creating linguistic fuzzy sets and conditional statements and (2) a fuzzy-logic software library for embedding fuzzy processing capability into current application programs. The graphical- interface tool was developed using the Tcl/Tk programming language. The fuzzy-logic software library was written in the C programming language.

  9. AROUSAL AND LOGICAL INFERENCE.

    ERIC Educational Resources Information Center

    KOEN, FRANK

    THE PURPOSE OF THE EXPERIMENT WAS TO DETERMINE THE DEGREE TO WHICH PHYSIOLOGICAL AROUSAL, AS INDEXED BY THE GRASON STADLER TYPE OPERANT CONDITIONING APPARATUS (GSR), IS RELATED TO THE ACCURACY OF LOGICAL REASONING. THE STIMULI WERE 12 SYLLOGISMS, THREE OF EACH OF FOUR DIFFERENT LOGICAL FORMS. THE 14 SUBJECTS (SS) INDICATED THEIR AGREEMENT OR…

  10. All-Optical Ultrasound Transducers for High Resolution Imaging

    NASA Astrophysics Data System (ADS)

    Sheaff, Clay Smith

    High frequency ultrasound (HFUS) has increasingly been used within the past few decades to provide high resolution (< 200 mum) imaging in medical applications such as endoluminal imaging, intravascular imaging, ophthalmology, and dermatology. The optical detection and generation of HFUS using thin films offers numerous advantages over traditional piezoelectric technology. Circumvention of an electronic interface with the device head is one of the most significant given the RF noise, crosstalk, and reduced capacitance that encumbers small-scale electronic transducers. Thin film Fabry-Perot interferometers - also known as etalons - are well suited for HFUS receivers on account of their high sensitivity, wide bandwidth, and ease of fabrication. In addition, thin films can be used to generate HFUS when irradiated with optical pulses - a method referred to as Thermoelastic Ultrasound Generation (TUG). By integrating a polyimide (PI) film for TUG into an etalon receiver, we have created for the first time an all-optical ultrasound transducer that is both thermally stable and capable of forming fully sampled 2-D imaging arrays of arbitrary configuration. Here we report (1) the design and fabrication of PI-etalon transducers; (2) an evaluation of their optical and acoustic performance parameters; (3) the ability to conduct high-resolution imaging with synthetic 2-D arrays of PI-etalon elements; and (4) work towards a fiber optic PI-etalon for in vivo use. Successful development of a fiber optic imager would provide a unique field-of-view thereby exposing an abundance of prospects for minimally-invasive analysis, diagnosis, and treatment of disease.

  11. Amorphous silicon thin film for all-optical micromodulator

    NASA Astrophysics Data System (ADS)

    Nigro, Maria Arcangela M.; Cantore, Francesca; Della Corte, Francesco Giuseppe; Summonte, Caterina

    2003-04-01

    Photoinduced absorption by VIS radiation in a-Si:H has been studied in-guide, in order to realise a novel all-optical waveguide micromodulator for application at 1.3 and 1.55 μm fiber communication wavelengths. In a-Si:H the photoinduced effects and the NIR absorption both involve dangling bonds states. The density of these states, deep in the gap, can be varied with doping. Therefore three waveguide prototypes have been fabricated by Plasma Enhanced Chemical Vapour Deposition on a silicon wafer. Their structure consist of a a-Si:H/SiO2 stack where the a-Si:H cores have different doping. The upper cladding is air. Optical measures on the core materials and signal transmission analysis in-guide at bit rates up to 200 kBit/s have been carried out. The excitation source of the VIS pump system for in-guide analysis consisted of simple, low cost AlInGaP LED"s controlled by a pulse generator. The pump and probe measures have been performed with different pump wavelengths and by varying the illumination intensity. LED"s with wavelengths of 644, 612, 590 and 571 nm have been alternatively used. For each pump wavelength, the light intensity was varied between 0,15 and 0,85 mW/mm2. The results confirms that the optical modulation of the NIR signal enhances at high doping levels and for longer wavelengths. The modulation speed is probably limited by recombination phenomena.

  12. Phase-coherent all-optical frequency division by three

    SciTech Connect

    Lee, Dong-Hoon; Klein, Marvin E.; Meyn, Jan-Peter; Wallenstein, Richard; Gross, Petra; Boller, Klaus-Jochen

    2003-01-01

    The properties of all-optical phase-coherent frequency division by 3, based on a self-phase-locked continuous-wave (cw) optical parametric oscillator (OPO), are investigated theoretically and experimentally. The frequency to be divided is provided by a diode laser master-oscillator power-amplifier system operated at a wavelength of 812 nm and used as the pump source of the OPO. Optical self-phase-locking of the OPO signal and idler waves is achieved by mutual injection locking of the signal wave and the intracavity frequency-doubled idler wave. The OPO process and the second-harmonic generation of the idler wave are simultaneously phase matched through quasi-phase-matching using two periodically poled sections of different period manufactured within the same LiNbO{sub 3} crystal. An optical self-phase-locking range of up to 1 MHz is experimentally observed. The phase coherence of frequency division by three is measured via the phase stability of an interference pattern formed by the input and output waves of the OPO. The fractional frequency instability of the divider is measured to be smaller than 7.6x10{sup -14} for a measurement time of 10 s (resolution limited). The self-phase-locking characteristics of the cw OPO are theoretically investigated by analytically solving the coupled field equations in the steady-state regime. For the experimental parameters of the OPO, the calculations predict a locking range of 1.3 MHz and a fractional frequency instability of 1.6x10{sup -15}, in good agreement with the experimental results.

  13. Description of all-optical network test bed and applications

    NASA Astrophysics Data System (ADS)

    Marquis, Douglas; Castagnozzi, Daniel M.; Hemenway, B. R.; Parikh, Salil A.; Stevens, Mark L.; Swanson, Eric A.; Thomas, Robert E.; Ozveren, C.; Kaminow, Ivan P.

    1995-12-01

    We describe an all-optical network testbed deployed in the Boston metropolitan area, and some of the experimental applications running over the network. The network was developed by a consortium of AT&T Bell Laboratories, Digital Equipment Corporation, and Massachusetts Institute of Technology under a grant from ARPA. The network is an optical WDM system organized as a hierarchy consisting of local, metropolitan, and wide area nodes that support optical broadcast and routing modes. Frequencies are shared and reused to enhance network scalability. Electronic access is provided through optical terminals that support multiple services having data rates between 10 Mbps/user and 10 Gbps/user. Novel components used to implement the network include fast-tuning 1.5 micrometers distributed Bragg reflector lasers, passive wavelength routers, and broadband optical frequency converters. An overlay control network implemented at 1.3 micrometers allows reliable out-of-band control and standardized network management of all network nodes. We have created interfaces between the AON and commercially available electronic circuit-switched and packet-switched networks. We will report on network applications that can dynamically allocate optical bandwidth between electronic packet-switches based on the offered load presented by users, without requiring interfaces between users and the AON control system. We will also describe video and telemedicine applications running over the network. We have demonstrated an audio/video codec that is directly interfaced to the optical network, and is capable of transmitting high-rate digitized video signals for broadcast or videoconferencing applications. We have also demonstrated a state-of-the-art radiological workstation that uses the AON to transport 2000 X 2000 X 16 bit images from a remote image server.

  14. All-optical metamaterial modulators: Fabrication, simulation and characterization

    NASA Astrophysics Data System (ADS)

    Ku, Zahyun

    Artificially structured composite metamaterials consist of sub-wavelength sized structures that exhibit unusual electromagnetic properties not found in nature. Since the first experimental verification in 2000, metamaterials have drawn considerable attention because of their broad range of potential applications. One of the most attractive features of metamaterials is to obtain negative refraction, termed left-handed materials or negative-index metamaterials, over a limited frequency band. Negative-index metamaterials at near infrared wavelength are fabricated with circular, elliptical and rectangular holes penetrating through metal/dielectric/metal films. All three negative-index metamaterial structures exhibit similar figure of merit; however, the transmission is higher for the negative-index metamaterial with rectangular holes as a result of an improved impedance match with the substrate-superstrate (air-glass) combination. In general, the processing procedure to fabricate the fishnet structured negative-index metamaterials is to define the hole-size using a polymetric material, usually by lithographically defining polymer posts, followed by deposition of the constitutive materials and dissolution of the polymer (liftoff processing). This processing (fabrication of posts: multi-layer deposition: liftoff) often gives rise to significant sidewall-angle because materials accumulate on the tops of the posts that define the structure, each successive film deposition has a somewhat larger aperture on the bottom metamaterial film, giving rise to a nonzero sidewall-angle and to optical bianisotropy. Finally, we demonstrate a nanometer-scale, sub-picosecond metamaterial device capable of over terabit/second all-optical communication in the near infrared spectrum. We achieve a 600 fs device response by utilizing a regime of sub-picosecond carrier dynamics in amorphous silicon and ˜70% modulation in a path length of only 124 nm by exploiting the strong nonlinearities in

  15. Fuzziness in abacus logic

    NASA Astrophysics Data System (ADS)

    Malhas, Othman Qasim

    1993-10-01

    The concept of “abacus logic” has recently been developed by the author (Malhas, n.d.). In this paper the relation of abacus logic to the concept of fuzziness is explored. It is shown that if a certain “regularity” condition is met, concepts from fuzzy set theory arise naturally within abacus logics. In particular it is shown that every abacus logic then has a “pre-Zadeh orthocomplementation”. It is also shown that it is then possible to associate a fuzzy set with every proposition of abacus logic and that the collection of all such sets satisfies natural conditions expected in systems of fuzzy logic. Finally, the relevance to quantum mechanics is discussed.

  16. Introducing Exclusion Logic as a Deontic Logic

    NASA Astrophysics Data System (ADS)

    Evans, Richard

    This paper introduces Exclusion Logic - a simple modal logic without negation or disjunction. We show that this logic has an efficient decision procedure. We describe how Exclusion Logic can be used as a deontic logic. We compare this deontic logic with Standard Deontic Logic and with more syntactically restricted logics.

  17. All-optical dynamical Casimir effect in a three-dimensional terahertz photonic band gap

    NASA Astrophysics Data System (ADS)

    Hagenmüller, David

    2016-06-01

    We identify an architecture for the observation of all-optical dynamical Casimir effect in realistic experimental conditions. We suggest that by integrating quantum wells in a three-dimensional (3D) photonic band-gap material made out of large-scale (˜200 -μ m ) germanium logs, it is possible to achieve ultrastrong light-matter coupling at terahertz frequencies for the cyclotron transition of a two-dimensional electron gas interacting with long-lived optical modes, in which vacuum Rabi splitting is comparable to the Landau level spacing. When a short, intense electromagnetic transient of duration ˜250 fs and carrying a peak magnetic field ˜5 T is applied to the structure, the cyclotron transition can be suddenly tuned on resonance with a desired photon mode, switching on the light-matter interaction and leading to a Casimir radiation emitted parallel to the quantum well plane. The radiation spectrum consists of sharp peaks with frequencies coinciding with engineered optical modes within the 3D photonic band gap, and its characteristics are extremely robust to the nonradiative damping which can be large in our system. Furthermore, the absence of continuum with associated low-energy excitations for both electromagnetic and electronic quantum states can prevent the rapid absorption of the photon flux which is likely to occur in other proposals for all-optical dynamical Casimir effect.

  18. A Little Logic Goes a Long Way: Basing Experiment on Semantic Theory in the Cognitive Science of Conditional Reasoning

    ERIC Educational Resources Information Center

    Stenning, Keith; van Lambalgen, Michiel

    2004-01-01

    Modern logic provides accounts of both interpretation and derivation which work together to provide abstract frameworks for modelling the sensitivity of human reasoning to task, context and content. Cognitive theories have underplayed the importance of interpretative processes. We illustrate, using Wason's [Q. J. Exp. Psychol. 20 (1968) 273]…

  19. Microelectromechanical reprogrammable logic device

    PubMed Central

    Hafiz, M. A. A.; Kosuru, L.; Younis, M. I.

    2016-01-01

    In modern computing, the Boolean logic operations are set by interconnect schemes between the transistors. As the miniaturization in the component level to enhance the computational power is rapidly approaching physical limits, alternative computing methods are vigorously pursued. One of the desired aspects in the future computing approaches is the provision for hardware reconfigurability at run time to allow enhanced functionality. Here we demonstrate a reprogrammable logic device based on the electrothermal frequency modulation scheme of a single microelectromechanical resonator, capable of performing all the fundamental 2-bit logic functions as well as n-bit logic operations. Logic functions are performed by actively tuning the linear resonance frequency of the resonator operated at room temperature and under modest vacuum conditions, reprogrammable by the a.c.-driving frequency. The device is fabricated using complementary metal oxide semiconductor compatible mass fabrication process, suitable for on-chip integration, and promises an alternative electromechanical computing scheme. PMID:27021295

  20. Microelectromechanical reprogrammable logic device.

    PubMed

    Hafiz, M A A; Kosuru, L; Younis, M I

    2016-01-01

    In modern computing, the Boolean logic operations are set by interconnect schemes between the transistors. As the miniaturization in the component level to enhance the computational power is rapidly approaching physical limits, alternative computing methods are vigorously pursued. One of the desired aspects in the future computing approaches is the provision for hardware reconfigurability at run time to allow enhanced functionality. Here we demonstrate a reprogrammable logic device based on the electrothermal frequency modulation scheme of a single microelectromechanical resonator, capable of performing all the fundamental 2-bit logic functions as well as n-bit logic operations. Logic functions are performed by actively tuning the linear resonance frequency of the resonator operated at room temperature and under modest vacuum conditions, reprogrammable by the a.c.-driving frequency. The device is fabricated using complementary metal oxide semiconductor compatible mass fabrication process, suitable for on-chip integration, and promises an alternative electromechanical computing scheme. PMID:27021295

  1. Microelectromechanical reprogrammable logic device

    NASA Astrophysics Data System (ADS)

    Hafiz, M. A. A.; Kosuru, L.; Younis, M. I.

    2016-03-01

    In modern computing, the Boolean logic operations are set by interconnect schemes between the transistors. As the miniaturization in the component level to enhance the computational power is rapidly approaching physical limits, alternative computing methods are vigorously pursued. One of the desired aspects in the future computing approaches is the provision for hardware reconfigurability at run time to allow enhanced functionality. Here we demonstrate a reprogrammable logic device based on the electrothermal frequency modulation scheme of a single microelectromechanical resonator, capable of performing all the fundamental 2-bit logic functions as well as n-bit logic operations. Logic functions are performed by actively tuning the linear resonance frequency of the resonator operated at room temperature and under modest vacuum conditions, reprogrammable by the a.c.-driving frequency. The device is fabricated using complementary metal oxide semiconductor compatible mass fabrication process, suitable for on-chip integration, and promises an alternative electromechanical computing scheme.

  2. Dispositional logic

    SciTech Connect

    Zadeh, L.A.

    1988-01-01

    The applicability of conventional mathematical analysis (based on the combination of two-valued logic and probability theory) to problems in which human judgment, perception, or emotions play significant roles is considered theoretically. It is shown that dispositional logic, a branch of fuzzy logic, has particular relevance to the common-sense reasoning typical of human decision-making. The concepts of dispositionality and usuality are defined analytically, and a dispositional conjunctive rule and dispositional modus ponens are derived. 7 references.

  3. Dispositional logic

    NASA Technical Reports Server (NTRS)

    Le Balleur, J. C.

    1988-01-01

    The applicability of conventional mathematical analysis (based on the combination of two-valued logic and probability theory) to problems in which human judgment, perception, or emotions play significant roles is considered theoretically. It is shown that dispositional logic, a branch of fuzzy logic, has particular relevance to the common-sense reasoning typical of human decision-making. The concepts of dispositionality and usuality are defined analytically, and a dispositional conjunctive rule and dispositional modus ponens are derived.

  4. A feasibility study for optical soliton logic gates

    NASA Astrophysics Data System (ADS)

    Eix, Sandra

    Optical fibers have revolutionized telecommunications by providing an enormous increase in speed of data transmission over that available using electronic methods. In order to maximize the advantages of this increased bandwidth, there is considerable interest in replacing slow electronic control and computing with all- optical systems. This thesis addresses the feasibility of using optical solitons travelling in fibers with nonlinear indices of refraction to represent binary data and to model logic operations. The generalized nonlinear Schrödinger equation (GNLSE) describes the propagation of soliton pulses in nonlinear optical fibers. For certain saturable indices of refraction, there exist solutions to the GNLSE with the same width (time duration) but different pulse amplitudes. These are known as bistable solitons of the second kind (BISOL2). Pairs of BISOL2 can be used to represent logical 1 and 0 to encode digital information. Previous work has shown that simple amplification of the pulse can lead to switching between the high and low state BISOL2. The required amplification may be provided by coupling the fiber containing the signal pulse to one of more other fibers. This thesis provides a detailed analysis of the physics of soliton propagation in two- fiber couplers for two different models of a saturable nonlinearity, and in three-fiber couplers for one of these models. Using a combination of variational analysis and numerical propagation of the appropriate GNLSEs, we are able to predict the behaviour of solitons in coupled fibers for a wide range of parameters and initial conditions. Continuing from this analysis, we show that it is possible to select parameters for a limited-length coupler to predict and direct its output quite accurately. In particular, we select coupling parameters such that a system of coupled fibers will behave as a binary logic gate. A two-fiber NOT gate and a three-fiber AND gate are demonstrated numerically, for each nonlinearity

  5. A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

    NASA Astrophysics Data System (ADS)

    Li, Liang; Ran, Xu; Wu, Kaihui; Song, Jian; Han, Zongqi

    2015-06-01

    The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.

  6. Teaching Logic.

    ERIC Educational Resources Information Center

    Dyrud, Marilyn A.

    To make introducing logic to college students in speech and expository writing classes more interesting, letters to the editor can be used to teach logical fallacies. Letters to the editor are particularly useful because they give students a sense of the community they live in (issues, concerns, and the spectrum of opinion), they are easily…

  7. Artificial eye for scotopic vision with bioinspired all-optical photosensitivity enhancer

    NASA Astrophysics Data System (ADS)

    Liu, Hewei; Huang, Yinggang; Jiang, Hongrui

    2016-04-01

    The ability to acquire images under low-light conditions is critical for many applications. However, to date, strategies toward improving low-light imaging primarily focus on developing electronic image sensors. Inspired by natural scotopic visual systems, we adopt an all-optical method to significantly improve the overall photosensitivity of imaging systems. Such optical approach is independent of, and can effectively circumvent the physical and material limitations of, the electronics imagers used. We demonstrate an artificial eye inspired by superposition compound eyes and the retinal structure of elephantnose fish. The bioinspired photosensitivity enhancer (BPE) that we have developed enhances the image intensity without consuming power, which is achieved by three-dimensional, omnidirectionally aligned microphotocollectors with parabolic reflective sidewalls. Our work opens up a previously unidentified direction toward achieving high photosensitivity in imaging systems.

  8. Artificial eye for scotopic vision with bioinspired all-optical photosensitivity enhancer.

    PubMed

    Liu, Hewei; Huang, Yinggang; Jiang, Hongrui

    2016-04-12

    The ability to acquire images under low-light conditions is critical for many applications. However, to date, strategies toward improving low-light imaging primarily focus on developing electronic image sensors. Inspired by natural scotopic visual systems, we adopt an all-optical method to significantly improve the overall photosensitivity of imaging systems. Such optical approach is independent of, and can effectively circumvent the physical and material limitations of, the electronics imagers used. We demonstrate an artificial eye inspired by superposition compound eyes and the retinal structure of elephantnose fish. The bioinspired photosensitivity enhancer (BPE) that we have developed enhances the image intensity without consuming power, which is achieved by three-dimensional, omnidirectionally aligned microphotocollectors with parabolic reflective sidewalls. Our work opens up a previously unidentified direction toward achieving high photosensitivity in imaging systems. PMID:26976565

  9. Artificial eye for scotopic vision with bioinspired all-optical photosensitivity enhancer

    PubMed Central

    Liu, Hewei; Huang, Yinggang; Jiang, Hongrui

    2016-01-01

    The ability to acquire images under low-light conditions is critical for many applications. However, to date, strategies toward improving low-light imaging primarily focus on developing electronic image sensors. Inspired by natural scotopic visual systems, we adopt an all-optical method to significantly improve the overall photosensitivity of imaging systems. Such optical approach is independent of, and can effectively circumvent the physical and material limitations of, the electronics imagers used. We demonstrate an artificial eye inspired by superposition compound eyes and the retinal structure of elephantnose fish. The bioinspired photosensitivity enhancer (BPE) that we have developed enhances the image intensity without consuming power, which is achieved by three-dimensional, omnidirectionally aligned microphotocollectors with parabolic reflective sidewalls. Our work opens up a previously unidentified direction toward achieving high photosensitivity in imaging systems. PMID:26976565

  10. All-optical clock recovery for 40Gbs using an amplified feedback DFB laser

    NASA Astrophysics Data System (ADS)

    Sun, Yu; Pan, J. Q.; Zhao, L. J.; Chen, W. X.; Wang, W.; Wang, L.; Zhao, X. F.; Lou, C. Y.

    2009-11-01

    All-optical clock recovery is a key technology in all-optical 3R signal regeneration (Re-amplification, Retiming, and Reshaping) process. In this paper, a monolithic integrated three-section amplified feedback semiconductor laser (AFL) is demonstrated as an all optical clock regenerator. We fabricated a three-section AFL using quantum well intermixing process without regrowth instead of butt-joint process. The tunable characteristics of three-section AFL were investigated, and all optical clock recovery for 40Gb/s return to zero (RZ) 231-1 pseudorandom binary sequence (PRBS) is demonstrated experimentally using AFL with time jitter about 689.2fs.

  11. All-optical switching of magnetoresistive devices using telecom-band femtosecond laser

    SciTech Connect

    He, Li; Chen, Jun-Yang; Wang, Jian-Ping E-mail: moli@umn.edu; Li, Mo E-mail: moli@umn.edu

    2015-09-07

    Ultrafast all-optical switching of the magnetization of various magnetic systems is an intriguing phenomenon that can have tremendous impact on information storage and processing. Here, we demonstrate all-optical switching of GdFeCo alloy films using a telecom-band femtosecond fiber laser. We further fabricate Hall cross devices and electrically readout all-optical switching by measuring anomalous Hall voltage changes. The use of a telecom laser and the demonstrated all-optical switching of magnetoresistive devices represent the first step toward integration of opto-magnetic devices with mainstream photonic devices to enable novel optical and spintronic functionalities.

  12. Simultaneous all-optical half-adder, half-subtracter, comparator, and decoder based on nonlinear effects harnessing in highly nonlinear fibers

    NASA Astrophysics Data System (ADS)

    Singh, Karamdeep; Kaur, Gurmeet; Singh, Maninder Lal

    2016-07-01

    A multifunctional combinational logic module capable of performing several signal manipulation tasks all-optically, such as half-addition/subtraction, single-bit comparison, and 2-to-4 decoding simultaneously is proposed. Several logic functions (A+B¯, A.B, A¯.B, A.B¯, A⊕B, and A⊙B) between two input signals A and B are implemented by harnessing a number of nonlinear effects, such as cross-phase modulation (XPM), cross-gain modulation (XGM), and four-wave mixing (FWM) inside only two highly nonlinear fibers (HNLF) arranged in a parallel structure. The NOR gate (A+B¯) is realized by the means of XPM effect in the first HNLF, whereas, A‾.B, A.B¯, and A.B logics have relied on utilization of XGM and FWM processes, respectively, in parametric medium made up of the second HNLF of parallel arrangement. The remaining A⊕B and A⊙B logics required for successful implementation of the proposed simultaneous scheme are attained by temporally combining previously achieved (A‾.B and A.B‾) and (A.B and A+B‾) logics. Quality-factor ≥7.4 and extinction ratio ≥12.30 dB have been achieved at repetition rates of 100 Gbps for all logic functions (A+B‾, A.B, A¯.B, A.B¯, A⊕B, and A⊙B), suggesting successful simultaneous implementation.

  13. All-Optical Micro Motors Based on Moving Gratings in Photosensitive Media

    NASA Technical Reports Server (NTRS)

    Adamovsky, Gregory (Technical Monitor); Curley, M.; Sarkisov, S.; Fields, A.

    2003-01-01

    This research effort was a feasibility study of the concept of an all-optical micro motor with a rotor driven by a traveling wave. The wave was a result of a photo induced surface deformation of a photosensitive material produced by a traveling holographic grating. Two phases modulated coherent optical beams were used to generate the grating in two types of photosensitive materials. The materials that were studied were photorefractive crystals and thin polymer films. Theoretical studies were performed on lithium niobate giving predictions of deformations of the order of nanometers. The experimental deformation size was also on the order of nanometers. The deformations were deep enough to provide conditions for the implementation of the all-optical motor using lithium niobate. We also were able to align micron-size dielectric particles along the holographic gratings by means of the periodic electric forces generated by the grating. These forces can also move the particles along the surface if the grating is moving. We then turned our attention on thin films and obtained a deformation visible on the order of 100 microns. An experimental breadboard demonstration of a prototype was done in the summer of 2001 at Glenn Research Center (GRC). The demonstration included the movement of clocks mechanical workings by an optically driven motor based on a polymer film. The application of this technology can be adapted to government as well as industrial uses. One such project is to make a chemical sensor for the detection of hazardous chemicals. The thin polymer film is highly suited for this purpose since a marker dye could be easily placed on the film in order to detect chemical compounds. This system could be a self-regulating chemical monitoring system used on launches of the space shuttle or locations where hazardous chemicals are present. The project provided support for two black minority graduate students targeting MS and PhD degrees in Applied Optics.

  14. Demonstration and characterisation of a non-inverting all-optical read/write regenerative memory

    NASA Astrophysics Data System (ADS)

    Johnson, N. C.; Harrison, J. A.; Blow, K. J.

    2008-09-01

    An all-optical regenerative memory device using a single loop mirror and a semiconductor optical amplifier is experimentally demonstrated. This configuration has potential for a low power all-optical stable memory device with non-inverting characteristics where packets are stored by continuously injecting the regenerated data back into the loop.

  15. All-optical signal processing at 10 GHz using a photonic crystal molecule

    SciTech Connect

    Combrié, Sylvain; Lehoucq, Gaëlle; Junay, Alexandra; De Rossi, Alfredo; Malaguti, Stefania; Bellanca, Gaetano; Trillo, Stefano; Ménager, Loic; Peter Reithmaier, Johann

    2013-11-04

    We report on 10 GHz operation of an all-optical gate based on an Indium Phosphide Photonic Crystal Molecule. Wavelength conversion and all-optical mixing of microwave signals are demonstrated using the 2 mW output of a mode locked diode laser. The spectral separation of the optical pump and signal is crucial in suppressing optical cross-talk.

  16. Description Logics

    NASA Astrophysics Data System (ADS)

    Baader, Franz

    Description Logics (DLs) are a well-investigated family of logic-based knowledge representation formalisms, which can be used to represent the conceptual knowledge of an application domain in a structured and formally well-understood way. They are employed in various application domains, such as natural language processing, configuration, and databases, but their most notable success so far is the adoption of the DL-based language OWL as standard ontology language for the semantic web.

  17. PAPR Reduction in All-optical OFDM Systems Based on Phase Pre-emphasis

    NASA Astrophysics Data System (ADS)

    He, Zhou; Li, Wei; Tao, Zhiyong; Shao, Ji ng; Liang, Xiaojun; Deng, Zhuanhua; Huang, Dexiu

    2011-02-01

    This paper investigates the peak-to-average power ratio (PAPR) theory in all-optical orthogonal frequency division multiplexing (OFDM) optical fibre communication systems. We find out that phase pre-emphasis could effectively reduce PAPR in all-optical OFDM communication systems which employ intensity modulation-direct detection (IM-DD) method. An equation is developed and proposed to calculate suitable phasing values for pre-emphasis. Furthermore, we find out that phase pre-emphasis cannot reduce PAPR effectively in all-optical OFDM systems that employ Phase Shift Keying (PSK) or Quadracture Amplitude Modulation (QAM) method.

  18. Engineered materials for all-optical helicity-dependent magnetic switching

    NASA Astrophysics Data System (ADS)

    Fullerton, Eric

    2014-03-01

    The possibilities of manipulating magnetization without applied magnetic fields have attracted growing attention over the last fifteen years. The low-power manipulation of magnetization, preferably at ultra-short time scales, has become a fundamental challenge with implications for future magnetic information memory and storage technologies. Here we explore the optical manipulation of the magnetization of engineered materials and devices using 100 fs optical pulses. We demonstrate that all optical - helicity dependent switching (AO-HDS) can be observed not only in selected rare-earth transition-metal (RE-TM) alloy films but also in a much broader variety of materials, including alloys, multilayers, heterostructures and RE-free Co-Ir-based synthetic ferrimagnets. The discovery of AO-HDS in RE-free TM-based synthetic ferrimagnets can enable breakthroughs for numerous applications since it exploits materials that are currently used in magnetic data storage, memories and logic technologies. In addition, this materials study of AO-HDS offers valuable insight into the underlying mechanisms involved. Indeed the common denominator of the diverse structures showing AO-HDS in this study is that two ferromagnetic sub-lattices exhibit magnetization compensation (and therefore angular momentum compensation) at temperatures near or above room temperature. We are highlighting that compensation plays a major role and that this compensation can be established at the atomic level as in alloys but also over a larger nanometers scale as in the multilayers or in heterostructures. We will also discuss the potential to extend AO-HDS to new classes of magnetic materials. This work was done in collaboration with S. Mangin, M. Gottwald, C-H. Lambert, D. Steil, V. Uhlíř, L. Pang, M. Hehn, S. Alebrand, M. Cinchetti, G. Malinowski, Y. Fainman, and M. Aeschlimann. Supported by the ANR-10-BLANC-1005 ``Friends,'' a grant from the Advanced Storage Technology Consortium, Partner University Fund

  19. Logic Simulator Program

    NASA Technical Reports Server (NTRS)

    Agarwal, R. K.

    1983-01-01

    The source code for the SPICE 2 program was deblocked in order to isolate and compile the subroutine in an effort to provide a software simulation of discrete and combinatorial electronic components. Incompatibilities between the UNIVAC 1180 FORTRAN and the Sigma V CP-V FORTRAN 4 were resolved. The SPICE 2 model is to be used to determine gate and fan-out delays, logic state conditions, and signal race conditions for transistor array elements and circuit logic to be patterned in the (SPI) 7101 CMOS silicon gate semicustom array. The simulator is to be operable from the CP-V time sharing terminals.

  20. A reconfigurable all-optical VPN based on XGM effect of SOA in WDM PON

    NASA Astrophysics Data System (ADS)

    Hu, Xiaofeng; Zhang, Liang; Cao, Pan; Wang, Tao; Su, Yikai

    2010-12-01

    We propose and experimentally demonstrate a reconfigurable all-optical VPN scheme enabling intercommunications among different ONUs in a WDM PON. Reconfiguration is realized by dynamically setting wavelength conversion of optical VPN signal using a SOA in the OLT.

  1. All-Optical Terahertz Optical Asymmetric Demultiplexer (toad) Based Binary Comparator:. a Proposal

    NASA Astrophysics Data System (ADS)

    Chattopadhyay, Tanay

    Comparator determines whether a number is greater than, equals to or less than another number. It plays a significant role in fast central processing unit in all-optical scheme. In all-optical scheme here 1-bit binary comparator is proposed and described by Terahertz Optical Asymmetric Demultiplexer (TOAD) based interferometric switch. Simulation result by Mathcad-7 is also given. Cascading technique of building up the n-bit binary comparator with this 1-bit comparator block is also proposed here.

  2. Fuzzy logic

    NASA Technical Reports Server (NTRS)

    Zadeh, Lofti A.

    1988-01-01

    The author presents a condensed exposition of some basic ideas underlying fuzzy logic and describes some representative applications. The discussion covers basic principles; meaning representation and inference; basic rules of inference; and the linguistic variable and its application to fuzzy control.

  3. On the fly all-optical packet switching based on hybrid WDM/OCDMA labeling scheme

    NASA Astrophysics Data System (ADS)

    Brahmi, Houssem; Giannoulis, Giannis; Menif, Mourad; Katopodis, Vasilis; Kalavrouziotis, Dimitrios; Kouloumentas, Christos; Groumas, Panos; Kanakis, Giannis; Stamatiadis, Christos; Avramopoulos, Hercules; Erasme, Didier

    2014-02-01

    We introduce a novel design of an all-optical packet routing node that allows for the selection and forwarding of optical packets based on the routing information contained in hybrid wavelength division multiplexing/optical code division multiple access (WDM/OCDMA) labels. A stripping paradigm of optical code-label is adopted. The router is built around an optical-code gate that consists in an optical flip-flop controlled by two fiber Bragg grating correlators and is combined with a Mach-Zehnder interferometer (MZI)-based forwarding gate. We experimentally verify the proof-of-principle operation of the proposed self-routing node under NRZ and OCDMA packet traffic conditions. The successful switching of elastic NRZ payload at 40 Gb/s controlled by DS-OCDMA coded labels and the forwarding operation of encoded data using EQC codes are presented. Proper auto-correlation functions are obtained with higher than 8.1 dB contrast ratio, suitable to efficiently trigger the latching device with a contrast ratio of 11.6 dB and switching times below 3.8 ns. Error-free operation is achieved with 1.5 dB penalty for 40 Gb/s NRZ data and with 2.1 dB penalty for DS-OCDMA packets. The scheme can further be applied to large-scale optical packet switching networks by exploiting efficient optical coders allocated at different WDM channels.

  4. Helical logic

    NASA Astrophysics Data System (ADS)

    Merkle, Ralph C.; Drexler, K. Eric

    1996-12-01

    Helical logic is a theoretical proposal for a future computing technology using the presence or absence of individual electrons (or holes) to encode 1s and 0s. The electrons are constrained to move along helical paths, driven by a rotating electric field in which the entire circuit is immersed. The electric field remains roughly orthogonal to the major axis of the helix and confines each charge carrier to a fraction of a turn of a single helical loop, moving it like water in an Archimedean screw. Each loop could in principle hold an independent carrier, permitting high information density. One computationally universal logic operation involves two helices, one of which splits into two `descendant' helices. At the point of divergence, differences in the electrostatic potential resulting from the presence or absence of a carrier in the adjacent helix controls the direction taken by a carrier in the splitting helix. The reverse of this sequence can be used to merge two initially distinct helical paths into a single outgoing helical path without forcing a dissipative transition. Because these operations are both logically and thermodynamically reversible, energy dissipation can be reduced to extremely low levels. This is the first proposal known to the authors that combines thermodynamic reversibility with the use of single charge carriers. It is important to note that this proposal permits a single electron to switch another single electron, and does not require that many electrons be used to switch one electron. The energy dissipated per logic operation can very likely be reduced to less than 0957-4484/7/4/004/img5 at a temperature of 1 K and a speed of 10 GHz, though further analysis is required to confirm this. Irreversible operations, when required, can be easily implemented and should have a dissipation approaching the fundamental limit of 0957-4484/7/4/004/img6.

  5. All-optical virtual private network and ONUs communication in optical OFDM-based PON system.

    PubMed

    Zhang, Chongfu; Huang, Jian; Chen, Chen; Qiu, Kun

    2011-11-21

    We propose and demonstrate a novel scheme, which enables all-optical virtual private network (VPN) and all-optical optical network units (ONUs) inter-communications in optical orthogonal frequency-division multiplexing-based passive optical network (OFDM-PON) system using the subcarrier bands allocation for the first time (to our knowledge). We consider the intra-VPN and inter-VPN communications which correspond to two different cases: VPN communication among ONUs in one group and in different groups. The proposed scheme can provide the enhanced security and a more flexible configuration for VPN users compared to the VPN in WDM-PON or TDM-PON systems. The all-optical VPN and inter-ONU communications at 10-Gbit/s with 16 quadrature amplitude modulation (16 QAM) for the proposed optical OFDM-PON system are demonstrated. These results verify that the proposed scheme is feasible. PMID:22109510

  6. Two types of all-optical magnetization switching mechanisms using femtosecond laser pulses

    NASA Astrophysics Data System (ADS)

    El Hadri, M. S.; Pirro, P.; Lambert, C.-H.; Petit-Watelot, S.; Quessab, Y.; Hehn, M.; Montaigne, F.; Malinowski, G.; Mangin, S.

    2016-08-01

    Using a time-dependent electrical investigation of the all-optical switching in ferrimagnetic and ferromagnetic Hall crosses via the anomalous Hall effect, intriguing insights into the rich physics underlying the all-optical switching are provided. We demonstrate that two different all-optical magnetization switching mechanisms can be distinguished; a "single pulse" switching for ferrimagnetic GdFeCo alloys, and a "two regimes" switching process for both ferrimagnetic TbCo alloys and ferromagnetic Pt/Co multilayers. We show that the latter takes place at two different time scales, and consists of a steplike helicity-independent multiple-domain formation within the first 1 ms followed by a helicity-dependent remagnetization on several tens of milliseconds.

  7. Tunable optoelectronic oscillator incorporating an all-optical microwave photonic filter

    NASA Astrophysics Data System (ADS)

    Li, Cheng-Xin; Chen, Fu-Shen; Zhang, Jia-Hong

    2015-01-01

    A tunable optoelectronic oscillator (OEO), which employs an all-optical microwave photonic filter (MPF) consisting of two laser sources (LD1 and LD2), an optical coupler (OC, 50:50), a Mach-Zehnder modulator (MZM), and a chirped fiber Bragg grating, is proposed. Because the central frequency of the all-optical MPF can be shifted by changing the wavelength spacing between the two laser sources, the frequency tunability of the OEO can be realized by incorporating such an all-optical MPF into an optical domain dual-loop OEO without any electronic microwave filters. A detailed theoretical analysis is presented and the results are confirmed by an experiment. A microwave signal with a frequency-tuning range from 4.057 to 8.595 GHz is generated. The phase noise, the long-term stability, and the side-mode suppression performance of the generated microwave signal are also investigated.

  8. Numerical investigation of an all-optical switch in a graded nonlinear plasmonic grating.

    PubMed

    Wang, Guoxi; Lu, Hua; Liu, Xueming; Gong, Yongkang

    2012-11-01

    We have proposed and numerically investigated an all-optical switch based on a metal-insulator-metal waveguide with graded nonlinear plasmonic gratings. The influences of grating depth and refractive index of a Kerr nonlinear medium on the transmission of the switch are exactly analyzed by utilizing transmission line theory. The finite-difference time-domain simulation results show that the highly compact structure possesses excellent switch function by tuning the incident electric field intensity. In addition, the simulation results show that this all-optical switch has an ultrawide operating frequency regime and femtosecond-scale response time (~130 fs). Such a switch can find potential applications for all-optical signal processing and optical communication. PMID:23080383

  9. The Completion of the Emergence of Modern Logic from Boole's The Mathematical Analysis of Logic to Frege's Begriffsschrift

    NASA Astrophysics Data System (ADS)

    Jetli, Priyedarshi

    Modern logic begins with Boole's The Mathematical Analysis of Logic when the algebra of logic was developed so that classical logic syllogisms were proven as algebraic equations and the turn from the logic of classes to propositional logic was suggested. The emergence was incomplete as Boole algebraised classical logic. Frege in Begriffsschrift replaced Aristotelian subject-predicate propositions by function and argument and displaced syllogisms with an axiomatic propositional calculus using conditionals, modus ponens and the law of substitution. Further Frege provided the breakthrough to lay down the groundwork for the development of quantified logic as well as the logic of relations. He achieved all of this through his innovative formal notations which have remained underrated. Frege hence completed the emergence of modern logic. Both Boole and Frege mathematised logic, but Frege's goal was to logicise mathematics. However the emergence of modern logic in Frege should be detached from his logicism.

  10. Low-power and ultrafast all-optical tunable plasmon-induced transparency in plasmonic nanostructures

    NASA Astrophysics Data System (ADS)

    Chai, Zhen; Hu, Xiaoyong; Zhu, Yu; Zhang, Fan; Yang, Hong; Gong, Qihuang

    2013-05-01

    We report an ultrafast and low-power all-optical tunable plasmon-induced transparency in a plasmonic nanostructure consisting of a gold nanowire grating embedded in a polycrystalline lithium niobate layer, realized based on strong quantum confinement enhancing nonlinearity. The all-optical tunability is realized based on the third-order nonlinear Kerr effect. A shift of 30 nm in the central wavelength of the transparency window is achieved under excitation of a pump light with an intensity as low as 7 MW/cm2. An ultrafast response time of 69 ps is reached because of ultrafast relaxation dynamics of bound electrons in polycrystalline lithium niobate.

  11. High-order all-optical differential equation solver based on microring resonators.

    PubMed

    Tan, Sisi; Xiang, Lei; Zou, Jinghui; Zhang, Qiang; Wu, Zhao; Yu, Yu; Dong, Jianji; Zhang, Xinliang

    2013-10-01

    We propose and experimentally demonstrate a feasible integrated scheme to solve all-optical differential equations using microring resonators (MRRs) that is capable of solving first- and second-order linear ordinary differential equations with different constant coefficients. Employing two cascaded MRRs with different radii, an excellent agreement between the numerical simulation and the experimental results is obtained. Due to the inherent merits of silicon-based devices for all-optical computing, such as low power consumption, small size, and high speed, this finding may motivate the development of integrated optical signal processors and further extend optical computing technologies. PMID:24081039

  12. All-optical microwave signal processing based on optical phase modulation

    NASA Astrophysics Data System (ADS)

    Zeng, Fei

    This thesis presents a theoretical and experimental study of optical phase modulation and its applications in all-optical microwave signal processing, which include all-optical microwave filtering, all-optical microwave mixing, optical code-division multiple-access (CDMA) coding, and ultrawideband (UWB) signal generation. All-optical microwave signal processing can be considered as the use of opto-electronic devices and systems to process microwave signals in the optical domain, which provides several significant advantages such as low loss, low dispersion, light weight, high time bandwidth products, and immunity to electromagnetic interference. In conventional approaches, the intensity of an optical carrier is modulated by a microwave signal based on direct modulation or external modulation. The intensity-modulated optical signal is then fed to a photonic circuit or system to achieve specific signal processing functionalities. The microwave signal being processed is usually obtained based on direct detection, i.e., an opto-electronic conversion by use of a photodiode. In this thesis, the research efforts are focused on the optical phase modulation and its applications in all-optical microwave signal processing. To avoid using coherent detection which is complicated and costly, simple and effective phase modulation to intensity modulation (PM-IM) conversion schemes are pursued. Based on a theoretical study of optical phase modulation, two approaches to achieving PM-IM conversions are proposed. In the first approach, the use of chromatic dispersion induced by a dispersive device to alter the phase relationships among the sidebands and the optical carrier of a phase-modulated optical signal to realize PM-IM conversion is investigated. In the second approach, instead of using a dispersive device, the PM-IM conversion is realized based on optical frequency discrimination implemented using an optical filter. We show that the proposed PM-IM conversion schemes can be

  13. Enhancement of photoinduced anisotropy and all-optical switching in Bacteriorhodopsin films

    NASA Astrophysics Data System (ADS)

    Wu, Pengfei; Rao, D. V. G. L. N.; Kimball, B. R.; Nakashima, M.; DeCristofano, B. S.

    2002-11-01

    Large enhancement of photoanisotropic effects is demonstrated in thin films of the biomaterial Bacteriorhodopsin by using two exciting beams of orthogonal polarization. The mechanism of the enhancement originates from optimization of direction-selected photoisomerization of the biomaterial controlled by the polarized exciting beams. The technique is applied for achieving an all-optical switch with the additional feature of output sign control.

  14. Integration of photonic nanojets and semiconductor nanoparticles for enhanced all-optical switching

    PubMed Central

    Born, Brandon; Krupa, Jeffrey D. A.; Geoffroy-Gagnon, Simon; Holzman, Jonathan F.

    2015-01-01

    All-optical switching is the foundation of emerging all-optical (terabit-per-second) networks and processors. All-optical switching has attracted considerable attention, but it must ultimately support operation with femtojoule switching energies and femtosecond switching times to be effective. Here we introduce an all-optical switch architecture in the form of a dielectric sphere that focuses a high-intensity photonic nanojet into a peripheral coating of semiconductor nanoparticles. Milli-scale spheres coated with Si and SiC nanoparticles yield switching energies of 200 and 100 fJ with switching times of 10 ps and 350 fs, respectively. Micro-scale spheres coated with Si and SiC nanoparticles yield switching energies of 1 pJ and 20 fJ with switching times of 2 ps and 270 fs, respectively. We show that femtojoule switching energies are enabled by localized photoinjection from the photonic nanojets and that femtosecond switching times are enabled by localized recombination within the semiconductor nanoparticles. PMID:26314911

  15. Dual-control nonlinear-optical loop mirrors for all-optical soliton synchronous modulation

    NASA Astrophysics Data System (ADS)

    Bigo, Sébastien; Desurvire, Emmanuel; Audouin, Olivier

    1996-09-01

    A novel dual-control configuration of nonlinear loop mirrors is used for all-optical soliton synchronous regeneration. Simulations show substantial improvement in transmission in this device compared with single-control devices, owing to chirp-free modulation. The absence of chirp is confirmed experimentally through a spectral analysis of the dual-control modulator.

  16. Magnetic induction measurements using an all-optical {sup 87}Rb atomic magnetometer

    SciTech Connect

    Wickenbrock, Arne; Tricot, François; Renzoni, Ferruccio

    2013-12-09

    In this work we propose, and experimentally demonstrate, the use of a self-oscillating all-optical atomic magnetometer for magnetic induction measurements. Given the potential for miniaturization of atomic magnetometers, and their extreme sensitivity, the present work shows that atomic magnetometers may play a key role in the development of instrumentation for magnetic induction tomography.

  17. Numerical investigation of all-optical add-drop multiplexing for spectrally overlapping OFDM signals.

    PubMed

    Sygletos, S; Fabbri, S; Giacoumidis, E; Sorokina, M; Marom, D M; Stephens, M F C; Klonidis, D; Tomkos, I; Ellis, A D

    2015-03-01

    We propose a novel architecture for all-optical add-drop multiplexing of OFDM signals. Sub-channel extraction is achieved by means of waveform replication and coherent subtraction from the OFDM super-channel. Numerical simulations have been carried out to benchmark the performance of the architecture against critical design parameters. PMID:25836815

  18. Analysis of all-optically tunable functionalities in subwavelength periodic structures by the Fourier modal method

    NASA Astrophysics Data System (ADS)

    Bej, Subhajit; Tervo, Jani; Francés, Jorge; Svirko, Yuri P.; Turunen, Jari

    2016-05-01

    We propose the nonlinear Fourier Modal Method (FMM) [J. Opt. Soc. Am. B 31, 2371 (2014)] as a convenient and versatile numerical tool for the design and analysis of grating based next generation all-optical devices. Here, we include several numerical examples where the FMM is used to simulate all-optically tunable functionalities in sub-wavelength periodic structures. At first, we numerically investigate a 1-D periodic nonlinear binary grating with amorphous TiO2. We plot the diffraction efficiency in the transmitted orders against the structure depth for normally incident plane wave. Change in diffraction efficiencies for different incident field amplitudes are evident from the plots. We verify the accuracy of our implementation by comparing our results with the results obtained with the nonlinear Split Field-Finite Difference Time Domain (SF-FDTD) method. Next we repeat the same experiment with vertically standing amorphous Titanium dioxide (TiO2) nanowire arrays grown on top of quartz which are periodic in two mutually perpendicular directions and examine the efficiencies in the direct transmitted light for different incident field amplitudes. Our third example includes analysis of a form birefringent linear grating with Kerr medium. With FMM we demonstrate that the birefringence of such a structure can be tuned by all-optical means. As a final example, we design a narrow band Guided Mode Resonance Filter (GMRF). Numerical experiments based on the nonlinear FMM reveal that the spectral tunability of such a filter can be obtained by all-optical means.

  19. All-optical event horizon in an optical analog of a Laval nozzle

    NASA Astrophysics Data System (ADS)

    Elazar, M.; Fleurov, V.; Bar-Ad, S.

    2012-12-01

    Exploiting the fact that light propagation in defocusing nonlinear media can mimic the transonic flow of an equivalent fluid, we demonstrate experimentally the formation of an all-optical event horizon in a waveguide structure akin to a hydrodynamic Laval nozzle. The analog event horizon which forms at the nozzle throat is suggested as a platform for analogous gravity experiments.

  20. Demonstration of optical header recognition for BPSK data using novel design of logic gates

    NASA Astrophysics Data System (ADS)

    Kakarla, Ravikiran; Venkitesh, Deepa

    2016-03-01

    We demonstrate the experimental implementation of an all-optical header recognition system for phase modulated data using logic gates, realized with the least number of active elements compared to conventional demonstrations. We experimentally implement the individual optical AND, XNOR/XOR logic gates and optimize their performances. We integrate these logic gates to build an all-optical header recognition system. We verify the working of the header recognition system for different combinations of header and local address bits. We also discuss the implementation challenges of the demonstrated system.

  1. Tribological Performance Optimization of Electroless Ni-B Coating under Lubricated Condition using Hybrid Grey Fuzzy Logic

    NASA Astrophysics Data System (ADS)

    Mukhopadhyay, Arkadeb; Duari, Santanu; Barman, Tapan Kumar; Sahoo, Prasanta

    2015-11-01

    Deposition of nickel coating and its alloys using electroless method has received wide acceptance by researchers and even the industries because of their excellent tribological properties. The present experimental investigation deals with the behaviour of electroless Ni-B coating under lubricated condition on a pin-on-disc tribotester. An attempt is made to minimize the friction and wear characteristics simultaneously by optimizing three test parameters i.e. the applied normal load, speed and time of sliding using grey fuzzy reasoning analysis. The friction and wear tests are carried out based on Taguchi's L27 orthogonal array of experiments. 3D surface and contour plots are generated to analyze the trends in variation of friction and wear of the deposits considering the combined effect of the design variables. Analysis of variance is done to find out the contribution of each test parameter and their interactions in controlling the friction and wear behaviour of electroless Ni-B coating. Surface morphology, phase transformation and coating composition analysis are done with the help of scanning electron microscopy, X-ray diffraction analysis and energy dispersive X-ray analysis respectively.

  2. Routing and wavelength assignment based on normalized resource and constraints for all-optical network

    NASA Astrophysics Data System (ADS)

    Joo, Seong-Soon; Nam, Hyun-Soon; Lim, Chang-Kyu

    2003-08-01

    With the rapid growth of the Optical Internet, high capacity pipes is finally destined to support end-to-end IP on the WDM optical network. Newly launched 2D MEMS optical switching module in the market supports that expectations of upcoming a transparent optical cross-connect in the network have encouraged the field applicable research on establishing real all-optical transparent network. To open up a customer-driven bandwidth services, design of the optical transport network becomes more challenging task in terms of optimal network resource usage. This paper presents a practical approach to finding a route and wavelength assignment for wavelength routed all-optical network, which has λ-plane OXC switches and wavelength converters, and supports that optical paths are randomly set up and released by dynamic wavelength provisioning to create bandwidth between end users with timescales on the order of seconds or milliseconds. We suggest three constraints to make the RWA problem become more practical one on deployment for wavelength routed all-optical network in network view: limitation on maximum hop of a route within bearable optical network impairments, limitation on minimum hops to travel before converting a wavelength, and limitation on calculation time to find all routes for connections requested at once. We design the NRCD (Normalized Resource and Constraints for All-Optical Network RWA Design) algorithm for the Tera OXC: network resource for a route is calculated by the number of internal switching paths established in each OXC nodes on the route, and is normalized by ratio of number of paths established and number of paths equipped in a node. We show that it fits for the RWA algorithm of the wavelength routed all-optical network through real experiments on the distributed objects platform.

  3. High-speed integrated optical logic based on the protein bacteriorhodopsin.

    PubMed

    Mathesz, Anna; Fábián, László; Valkai, Sándor; Alexandre, Daniel; Marques, Paulo V S; Ormos, Pál; Wolff, Elmar K; Dér, András

    2013-08-15

    The principle of all-optical logical operations utilizing the unique nonlinear optical properties of a protein was demonstrated by a logic gate constructed from an integrated optical Mach-Zehnder interferometer as a passive structure, covered by a bacteriorhodopsin (bR) adlayer as the active element. Logical operations were based on a reversible change of the refractive index of the bR adlayer over one or both arms of the interferometer. Depending on the operating point of the interferometer, we demonstrated binary and ternary logical modes of operation. Using an ultrafast transition of the bR photocycle (BR-K), we achieved high-speed (nanosecond) logical switching. This is the fastest operation of a protein-based integrated optical logic gate that has been demonstrated so far. The results are expected to have important implications for finding novel, alternative solutions in all-optical data processing research. PMID:23500476

  4. Ultrafast, low-power, all-optical switching via birefringent phase-matched transverse mode conversion in integrated waveguides.

    PubMed

    Hellwig, Tim; Epping, Jörn P; Schnack, Martin; Boller, Klaus-J; Fallnich, Carsten

    2015-07-27

    We demonstrate the potential of birefringence-based, all-optical, ultrafast conversion between the transverse modes in integrated optical waveguides by modelling the conversion process by numerically solving the multi-mode coupled nonlinear Schroedinger equations. The observed conversion is induced by a control beam and due to the Kerr effect, resulting in a transient index grating which coherently scatters probe light from one transverse waveguide mode into another. We introduce birefringent phase matching to enable efficient all-optically induced mode conversion at different wavelengths of the control and probe beam. It is shown that tailoring the waveguide geometry can be exploited to explicitly minimize intermodal group delay as well as to maximize the nonlinear coefficient, under the constraint of a phase matching condition. The waveguide geometries investigated here, allow for mode conversion with over two orders of magnitude reduced control pulse energy compared to previous schemes and thereby promise nonlinear mode switching exceeding efficiencies of 90% at switching energies below 1 nJ. PMID:26367581

  5. Logic and structured design for computer programmers

    SciTech Connect

    Rood, H.J.

    1985-01-01

    This text provides a language- and system-independent introduction to logical structures, and teaches logic plus the programming and data processing applications in which logic is used. The author has eliminated the need to cover basic program design at the beginning of every language course, and has used logic of sets, Boolean algebra, conditional statements, and truth tables to establish logic of structure flowchart, pseudocode, Warnier/Orr diagrams, and so on. After chapter three, the chapters are independent so that instructors can select the coverage of programming tools and techniques most relevant to their students.

  6. All-optical binary phase-coded UWB signal generation for multi-user UWB communications.

    PubMed

    Dong, Jianji; Yu, Yuan; Zhang, Yin; Li, Xiang; Huang, Dexiu; Zhang, Xinliang

    2011-05-23

    An all-optical incoherent scheme for generation of binary phase-coded ultra-wideband (UWB) signals is proposed and experimentally demonstrated. The binary phase coding is performed based on all-optical phase modulation in a semiconductor optical amplifier (SOA) and phase modulation to intensity modulation (PM-IM) conversion in a fiber delay interferometer (DI) that serves as a multichannel frequency discriminator. By locating the phase-modulated light waves at the positive and negative slopes of the DI transmission spectra, binary phase encoded UWB codes (0 and π) are generated. We also experimentally demonstrate a bipolar UWB coding system with a code length of 4, operating at 1.25 Gb/s. And the decoding is analyzed as well. Our proposed system has potential application in future high-speed UWB impulse radio over optical fiber access networks. PMID:21643312

  7. All-optical pseudorandom binary sequence generator with TOAD-based D flip-flops

    NASA Astrophysics Data System (ADS)

    Zoiros, K. E.; Das, M. K.; Gayen, D. K.; Maity, H. K.; Chattopadhyay, T.; Roy, J. N.

    2011-09-01

    An all-optical pseudo random binary sequence (PRBS) generator is designed using serially interconnected discrete Terahertz Optical Asymmetric Demultiplexer (TOAD)-based D flip-flops in a configuration exactly like the standard electronic setup. The performance of the circuit is evaluated through numerical simulation, which confirms its feasibility in terms of the choice of the critical parameters. The proposed scheme has been theoretically demonstrated for a 3-bit and 7-bit degree PRBS but can be extended to higher order by means of additional TOAD-based D flip-flops. Thus it can constitute an efficient solution for implementing all-optically a PRBS in an affordable, controllable and realistic manner.

  8. Ultrafast All-Optical Switching with Magnetic Resonances in Nonlinear Dielectric Nanostructures.

    PubMed

    Shcherbakov, Maxim R; Vabishchevich, Polina P; Shorokhov, Alexander S; Chong, Katie E; Choi, Duk-Yong; Staude, Isabelle; Miroshnichenko, Andrey E; Neshev, Dragomir N; Fedyanin, Andrey A; Kivshar, Yuri S

    2015-10-14

    We demonstrate experimentally ultrafast all-optical switching in subwavelength nonlinear dielectric nanostructures exhibiting localized magnetic Mie resonances. We employ amorphous silicon nanodisks to achieve strong self-modulation of femtosecond pulses with a depth of 60% at picojoule-per-disk pump energies. In the pump-probe measurements, we reveal that switching in the nanodisks can be governed by pulse-limited 65 fs-long two-photon absorption being enhanced by a factor of 80 with respect to the unstructured silicon film. We also show that undesirable free-carrier effects can be suppressed by a proper spectral positioning of the magnetic resonance, making such a structure the fastest all-optical switch operating at the nanoscale. PMID:26393983

  9. Tunable all-optical plasmonic diode based on Fano resonance in nonlinear waveguide coupled with cavities.

    PubMed

    Fan, Cairong; Shi, Fenghua; Wu, Hongxing; Chen, Yihang

    2015-06-01

    Tunable all-optical plasmonic diode is proposed based on the Fano resonance in an asymmetric and nonlinear system, comprising metal-insulator-metal waveguides coupled with nanocavities. The spatial asymmetry of the system gives rise to the nonreciprocity of the field localizations at the nonlinear gap between the coupled cavities and to the nonreciprocal nonlinear response. Nonlinear Fano resonance, originating from the interference between the discrete cavity mode and the continuum traveling mode, is observed and effectively tuned by changing the input power. By combining the unidirectional nonlinear response with the steep dispersion of the Fano asymmetric line shape, a transmission contrast ratio up to 41.46 dB can be achieved between forward and backward transmission. Our all-optical plasmonic diode with compact structure can find important applications in integrated optical nanocircuits. PMID:26030529

  10. All-optical photoacoustic microscopy based on plasmonic detection of broadband ultrasound

    NASA Astrophysics Data System (ADS)

    Wang, Tianxiong; Cao, Rui; Ning, Bo; Dixon, Adam J.; Hossack, John A.; Klibanov, Alexander L.; Zhou, Qifa; Wang, Anbo; Hu, Song

    2015-10-01

    We report on an implementation of all-optical photoacoustic microscopy (PAM), which capitalizes on the effect of surface plasmon resonance (SPR) for optical detection of ultrasound. The SPR sensor in our all-optical PAM shows, experimentally, a linear response to the acoustic pressure from 5.2 kPa to 2.1 MPa, an ultra-flat frequency response (±0.7 dB) from 680 kHz to 126 MHz, and a noise-equivalent pressure sensitivity of 3.3 kPa. With the broadband ultrasonic detection, our SPR-PAM has achieved high spatial resolution with relatively low anisotropy (i.e., 2.0 μm laterally and 8.4 μm axially). Three-dimensional high-resolution imaging of a single melanoma cell is demonstrated.

  11. All-optical background subtraction readout method for bimaterial cantilever array sensing.

    PubMed

    Gong, Cheng; Zhao, Yuejin; Dong, Liquan; Yu, Xiaomei; Chen, Ping; Liu, Weiwei

    2015-08-10

    Optical readout method plays a critical role in bimaterial cantilever array sensing system. The common optical readout methods are based on spectral plane filtering. In the paper an all-optical background subtraction readout approach inspired by total reflection and optical lever principle is presented for the bimaterial cantilever array sensing. Comparing with the spectral plane filtering methods the proposed approach eliminates digital subtraction operation by using optical total reflection instead of digital subtraction and avoids spectral filtering operation. An all-optical background subtraction directly-view infrared sensing system was developed to evaluate the approach. The infrared target can be directly acquired by the visible light CCD. The experimental results and analysis show its unique advantages. PMID:26367910

  12. All-optical scanhead for ultrasound and photoacoustic imaging-Imaging mode switching by dichroic filtering.

    PubMed

    Hsieh, Bao-Yu; Chen, Sung-Liang; Ling, Tao; Guo, L Jay; Li, Pai-Chi

    2014-03-01

    Ultrasound (US) and photoacoustic (PA) multimodality imaging has the advantage of combining good acoustic resolution with high optical contrast. The use of an all-optical scanhead for both imaging modalities can simplify integration of the two systems and miniaturize the imaging scanhead. Herein we propose and demonstrate an all-optical US/PA scanhead using a thin plate for optoacoustic generation in US imaging, a polymer microring resonator for acoustic detection, and a dichroic filter to switch between the two imaging modes by changing the laser wavelength. A synthetic-aperture focusing technique is used to improve the resolution and contrast. Phantom images demonstrate the feasibility of this design, and show that axial and lateral resolutions of 125 μm and 2.52°, respectively, are possible. PMID:25302154

  13. All-optical wavelength conversion of a 100-Gb/s polarization-multiplexed signal.

    PubMed

    Martelli, P; Boffi, P; Ferrario, M; Marazzi, L; Parolari, P; Siano, R; Pusino, V; Minzioni, P; Cristiani, I; Langrock, C; Fejer, M M; Martinelli, M; Degiorgio, V

    2009-09-28

    We present the results of an in-depth experimental investigation about all-optical wavelength conversion of a 100-Gb/s polarization-multiplexed (POLMUX) signal. Each polarization channel is modulated at 25 Gbaud by differential quadrature phase-shift keying (DQPSK). The conversion is realized exploiting the high nonlinear chi((2)) coefficient of a periodically poled lithium niobate waveguide, in a polarization-independent configuration. We find that slight non-idealities in the polarization independent setup of the wavelength converter can significantly impair the performance of POLMUX systems. We show that high-quality wavelength conversion can be nevertheless achieved for both the polarization channels, provided that an accurate optimization of the setup is performed. This is the first demonstration, to the best of our knowledge, of the possibility to obtain penalty-free all-optical wavelength conversion in a 100-Gb/s POLMUX transmission system using direct-detection. PMID:19907562

  14. An all-optical modulation method in sub-micron scale.

    PubMed

    Yang, Longzhi; Pei, Chongyang; Shen, Ao; Zhao, Changyun; Li, Yan; Li, Xia; Yu, Hui; Li, Yubo; Jiang, Xiaoqing; Yang, Jianyi

    2015-01-01

    We report a theoretical study showing that by utilizing the illumination of an external laser, the Surface Plasmon Polaritons (SPP) signals on the graphene sheet can be modulated in the sub-micron scale. The SPP wave can propagate along the graphene in the middle infrared range when the graphene is properly doped. Graphene's carrier density can be modified by a visible laser when the graphene sheet is exfoliated on the hydrophilic SiO2/Si substrate, which yields an all-optical way to control the graphene's doping level. Consequently, the external laser beam can control the propagation of the graphene SPP between the ON and OFF status. This all-optical modulation effect is still obvious when the spot size of the external laser is reduced to 400 nm while the modulation depth is as high as 114.7 dB/μm. PMID:25777581

  15. All-optical quantum random bit generation from intrinsically binary phase of parametric oscillators.

    PubMed

    Marandi, Alireza; Leindecker, Nick C; Vodopyanov, Konstantin L; Byer, Robert L

    2012-08-13

    We demonstrate a novel all-optical quantum random number generator (RNG) based on above-threshold binary phase state selection in a degenerate optical parametric oscillator (OPO). Photodetection is not a part of the random process, and no post processing is required for the generated bit sequence. We show that the outcome is statistically random with 99% confidence, and verify that the randomness is due to the phase of initiating photons generated through spontaneous parametric down conversion of the pump, with negligible contribution of classical noise sources. With the use of micro- and nanoscale OPO resonators, this technique offers a promise for simple, robust, and high-speed on-chip all-optical quantum RNGs. PMID:23038574

  16. All-optical code routing in interconnected optical CDMA and WDM ring networks.

    PubMed

    Deng, Yanhua; Fok, Mable P; Prucnal, Paul R; Wang, Ting

    2010-11-01

    We propose an all-optical hybrid network composed of optical code division multiple access (CDMA) rings interconnecting through a reconfigurable wavelength division multiplexing (WDM) metro area ring. This network retains the advantages of both the optical CDMA and WDM techniques, including asynchronous access and differentiated quality of service, while removing the hard limit on the number of subscribers and increasing network flexibility. The all-optical network is enabled by using nonlinear optical loop mirrors in an add/drop router (ADR) that performs code conversion, dropping, and switching asynchronously. We experimentally demonstrate the functionalities of the ADR in the proposed scheme asynchronously and obtain error-free performance. The bit-error rate measurements show acceptable power penalties for different code routes. PMID:21042372

  17. Ultrafast, broadband, and configurable midinfrared all-optical switching in nonlinear graphene plasmonic waveguides

    NASA Astrophysics Data System (ADS)

    Ooi, Kelvin J. A.; Cheng, J. L.; Sipe, J. E.; Ang, L. K.; Tan, Dawn T. H.

    2016-07-01

    Graphene plasmonics provides a unique and excellent platform for nonlinear all-optical switching, owing to its high nonlinear conductivity and tight optical confinement. In this paper, we show that impressive switching performance on graphene plasmonic waveguides could be obtained for both phase and extinction modulations at sub-MW/cm2 optical pump intensities. Additionally, we find that the large surface-induced nonlinearity enhancement that comes from the tight confinement effect can potentially drive the propagating plasmon pump power down to the pW range. The graphene plasmonic waveguides have highly configurable Fermi-levels through electrostatic-gating, allowing for versatility in device design and a broadband optical response. The high capabilities of nonlinear graphene plasmonics would eventually pave the way for the adoption of the graphene plasmonics platform in future all-optical nanocircuitry.

  18. Ultralow-light-level all-optical transistor in rubidium vapor

    SciTech Connect

    Jing, Jietai Zhou, Zhifan; Liu, Cunjin; Qin, Zhongzhong; Fang, Yami; Zhou, Jun; Zhang, Weiping

    2014-04-14

    An all-optical transistor (AOT) is a device in which one light beam can efficiently manipulate another. It is the foundational component of an all-optical communication network. An AOT that can operate at ultralow light levels is especially attractive for its potential application in the quantum information field. Here, we demonstrate an AOT driven by a weak light beam with an energy density of 2.5 × 10{sup −5} photons/(λ{sup 2}/2π) (corresponding to 6  yJ/(λ{sup 2}/2π) and about 800 total photons) using the double-Λ four-wave mixing process in hot rubidium vapor. This makes it a promising candidate for ultralow-light-level optical communication and quantum information science.

  19. An all-optical vector atomic magnetometer for fundamental physics applications

    NASA Astrophysics Data System (ADS)

    Wurm, David; Mateos, Ignacio; Zhivun, Elena; Patton, Brian; Fierlinger, Peter; Beck, Douglas; Budker, Dmitry

    2014-05-01

    We have developed a laboratory prototype of a compact all-optical vector magnetometer. Due to their high precision and absolute accuracy, atomic magnetometers are crucial sensors in fundamental physics experiments which require extremely stable magnetic fields (e.g., neutron EDM searches). This all-optical sensor will allow high-resolution measurements of the magnitude and direction of a magnetic field without perturbing the magnetic environment. Moreover, its absolute accuracy makes it calibration-free, an advantage in space applications (e.g., space-based gravitational-wave detection). Magnetometry in precision experiments or space applications also demands long-term stability and well-understood noise characteristics at frequencies below 10-4 Hz. We have characterized the low-frequency noise floor of this sensor and will discuss methods to improve its long-time performance.

  20. Model for multishot all-thermal all-optical switching in ferromagnets

    NASA Astrophysics Data System (ADS)

    Gorchon, J.; Yang, Y.; Bokor, J.

    2016-07-01

    All-optical magnetic switching (AOS) is a recently observed rich and puzzling phenomenon that offers promising technological applications. However, a fundamental understanding of the underlying mechanisms remains elusive. Here we present a model for multishot helicity-dependent AOS in ferromagnetic materials based on a purely heat-driven mechanism in the presence of magnetic circular dichroism (MCD). We predict that AOS should be possible with as little as 0.5% of MCD, after a minimum number of laser shots heat the sample close to the Curie temperature. Finally, we qualitatively reproduce the all-optically switched domain patterns observed experimentally by numerically simulating the result of multiple laser shots on an FePtC granular ferromagnetic film.

  1. An all-optical modulation method in sub-micron scale

    PubMed Central

    Yang, Longzhi; Pei, Chongyang; Shen, Ao; Zhao, Changyun; Li, Yan; Li, Xia; Yu, Hui; Li, Yubo; Jiang, Xiaoqing; Yang, Jianyi

    2015-01-01

    We report a theoretical study showing that by utilizing the illumination of an external laser, the Surface Plasmon Polaritons (SPP) signals on the graphene sheet can be modulated in the sub-micron scale. The SPP wave can propagate along the graphene in the middle infrared range when the graphene is properly doped. Graphene's carrier density can be modified by a visible laser when the graphene sheet is exfoliated on the hydrophilic SiO2/Si substrate, which yields an all-optical way to control the graphene's doping level. Consequently, the external laser beam can control the propagation of the graphene SPP between the ON and OFF status. This all-optical modulation effect is still obvious when the spot size of the external laser is reduced to 400 nm while the modulation depth is as high as 114.7 dB/μm. PMID:25777581

  2. All-optical switching of diffraction gratings infiltrated with dye-doped liquid crystals

    NASA Astrophysics Data System (ADS)

    Lucchetta, D. E.; Vita, F.; Simoni, F.

    2010-12-01

    We report the realization and the characterization of an all-optical switching device based on a transmission grating recorded in a polymeric substrate infiltrated with a methyl red-doped liquid crystal. The properties of this highly nonlinear mixture are exploited to modulate the diffraction of the grating by a pump beam when a static electric field is applied. The behavior of the device is in agreement with the existing model for methyl red-doped liquid crystals.

  3. An integrable high resolution all-optical analog-to-digital conversion scheme

    NASA Astrophysics Data System (ADS)

    Wei, Shile; Jian, Wu; Zhao, Lingjuan; Lu, Dan; Qiu, Jifang

    2014-05-01

    A novel 4 × 4 multimode interference couplers based phase-shifted photonic quantization scheme using multiwavelength mode locked pulse lasers as sampling source for all-optical analog-to-digital converter is proposed. Numerical analysis indicates that 8-bit quantization resolution operating at 40 GHz bandwidth could be achieved with an incident average optical power of 1.932 mW to each photodiode. The whole scheme can be integrated on a InP-based chip.

  4. An All-Optical Microwave Mixer with 8db RF Gain

    NASA Technical Reports Server (NTRS)

    Shieh, W.; Yao, S. X.; Lutes, G.; Maleki, L.

    1997-01-01

    An all-optical microwave mixer with an 8dB RF gain is demonstrated by using a semiconductor optical amplifier (SOA). 6GHz RF signal on a 1312 nm optical carrier is up-converted and down-converted to 1GHZ and 11 GHz by a 5GHz local oscillation (LO) signal on a 1320 nm optical carrier. Such a carrier could readily extend to millimeter wave range.

  5. Realization of all-optical switch and diode via Raman gain process using a Kerr field

    NASA Astrophysics Data System (ADS)

    Abbas, Muqaddar; Qamar, Sajid; Qamar, Shahid

    2016-08-01

    The idea of optical photonic crystal, which is generated using two counter-propagating fields, is revisited to study gain-assisted all-optical switch and diode using Kerr field. Two counter-propagating fields with relative detuning Δ ν generate standing-wave field pattern which interacts with a four-level atomic system. The standing-wave field pattern acts like a static photonic crystal for Δ ν =0 , however, it behaves as a moving photonic crystal for Δ ν \

  6. All-optical tuning of a nonlinear silicon microring assisted microwave photonic filter: theory and experiment.

    PubMed

    Long, Yun; Wang, Jian

    2015-07-13

    We propose and demonstrate an all-optical tuning mechanism to tune the response of a microwave photonic filter (MPF) based on a nonlinear silicon microring resonator (MRR). The tuning mechanism relies on the optical nonlinearities induced resonant wavelength shift in the silicon MRR, leading to the change of frequency difference between the optical carrier frequency and resonant frequency of the silicon MRR. A detailed theoretical model is established to describe the operation of the proposed all-optical tunable MPF. Two cases are studied in the experiment, i.e. the optical carrier frequency is located at the left or right side of the MRR resonant frequency. Both forward and backward pumping configurations in each case are demonstrated. Using the fabricated silicon MRR and exploiting light to control light, the central frequency of the notch MPF can be flexibly tuned by adjusting the pump light power. Moreover, the presented all-optical tuning mechanism might also facilitate interesting applications such as microwave switching and microwave modulation. PMID:26191838

  7. 10Gbit/s all-optical NRZ to RZ conversion based on TOAD

    NASA Astrophysics Data System (ADS)

    Yan, Yumei; Yin, Lina; Zhou, Yunfeng; Liu, Guoming; Wu, Jian; Lin, Jintong

    2006-01-01

    Future network will include wavelength division multiplexing (WDM) and optical time division multiplexing (OTDM) technologies. All-optical format conversion between their respective preferable data formats, non-return-to-zero (NRZ) and return-to-zero (RZ), may become an important technology. In this paper, 10Gbit/s all-optical NRZ-to-RZ conversion is demonstrated based on terahertz optical asymmetric demultiplexer (TOAD) using clock all-optically recovered from the NRZ signal for the first time. The clock component is enhanced in an SOA and the pseudo-return-to-zero (PRZ) signal is filtered. The PRZ signal is input into an injection mode-locked fiber ring laser for clock recovery. The recovered clock and the NRZ signal are input into TOAD as pump signal and probe signal, respectively, and format conversion is performed. The quality of the converted RZ signal is determined by that of the recovered clock and the NRZ signal, whereas hardly influenced by gain recovery time of the SOA. In the experimental demonstration, the obtained RZ signal has an extinction ratio of 8.7dB and low pattern dependency. After conversion, the spectrum broadens obviously and shows multimode structure with spectrum interval of 0.08nm, which matches with the bit rate 10Gbit/s. Furthermore, this format conversion method has some tolerance on the pattern dependency of the clock signal.

  8. All-Optical Wavelength Conversion by Picosecond Burst Absorption in Colloidal PbS Quantum Dots.

    PubMed

    Geiregat, Pieter; Houtepen, Arjan J; Van Thourhout, Dries; Hens, Zeger

    2016-01-26

    All-optical approaches to change the wavelength of a data signal are considered more energy- and cost-effective than current wavelength conversion schemes that rely on back and forth switching between the electrical and optical domains. However, the lack of cost-effective materials with sufficiently adequate optoelectronic properties hampers the development of this so-called all-optical wavelength conversion. Here, we show that the interplay between intraband and band gap absorption in colloidal quantum dots leads to a very strong and ultrafast modulation of the light absorption after photoexcitation in which slow components linked to exciton recombination are eliminated. This approach enables all-optical wavelength conversion at rates matching state-of-the-art convertors in speed, yet with cost-effective solution-processable materials. Moreover, the stronger light-matter interaction allows for implementation in small-footprint devices with low switching energies. Being a generic property, the demonstrated effect opens a pathway toward low-power integrated photonics based on colloidal quantum dots as the enabling material. PMID:26692112

  9. Software Defined Networking (SDN) controlled all optical switching networks with multi-dimensional switching architecture

    NASA Astrophysics Data System (ADS)

    Zhao, Yongli; Ji, Yuefeng; Zhang, Jie; Li, Hui; Xiong, Qianjin; Qiu, Shaofeng

    2014-08-01

    Ultrahigh throughout capacity requirement is challenging the current optical switching nodes with the fast development of data center networks. Pbit/s level all optical switching networks need to be deployed soon, which will cause the high complexity of node architecture. How to control the future network and node equipment together will become a new problem. An enhanced Software Defined Networking (eSDN) control architecture is proposed in the paper, which consists of Provider NOX (P-NOX) and Node NOX (N-NOX). With the cooperation of P-NOX and N-NOX, the flexible control of the entire network can be achieved. All optical switching network testbed has been experimentally demonstrated with efficient control of enhanced Software Defined Networking (eSDN). Pbit/s level all optical switching nodes in the testbed are implemented based on multi-dimensional switching architecture, i.e. multi-level and multi-planar. Due to the space and cost limitation, each optical switching node is only equipped with four input line boxes and four output line boxes respectively. Experimental results are given to verify the performance of our proposed control and switching architecture.

  10. All-optical arithmetic unit with the help of terahertz-optical-asymmetric-demultiplexer-based tree architecture

    NASA Astrophysics Data System (ADS)

    Gayen, Dilip Kumar; Nath Roy, Jitendra

    2008-03-01

    An all-optical arithmetic unit with the help of terahertz-optical-asymmetric-demultiplexer (TOAD)-based tree architecture is proposed. We describe the all-optical arithmetic unit by using a set of all-optical multiplexer, all-optical full-adder, and optical switch. The all-optical arithmetic unit can be used to perform a fast central processor unit using optical hardware components. We have tried to exploit the advantages of both optical tree architecture and TOAD-based switch to design an integrated all-optical circuit that can perform binary addition, addition with carry, subtract with borrow, subtract (2's complement), double, increment, decrement, and transfer operations.

  11. Ordered nano-scale domains in lithium niobate single crystals via phase-mask assisted all-optical poling

    NASA Astrophysics Data System (ADS)

    Wellington, I. T.; Valdivia, C. E.; Sono, T. J.; Sones, C. L.; Mailis, S.; Eason, R. W.

    2007-02-01

    We report the formation of directionally ordered nano-scale surface domains on the +z face of undoped congruent lithium niobate single crystals by using UV illumination through a phase mask of sub-micron periodicity with an energy fluence between ˜90 mJ/cm 2 and 150 mJ/cm 2 at λ = 266 nm. We clearly show here that the UV-induced surface ferroelectric domains only nucleate at and propagate along maxima of laser intensity. Although the domain line separation varies and is greater than 2 μm for this set of experimental conditions, this enables a degree of control over the all-optical poling process.

  12. All-optical NRZ-to-RZ data format conversion with optically injected laser diode or semiconductor optical amplifier

    NASA Astrophysics Data System (ADS)

    Lin, Gong-Ru; Chang, Yung-Cheng; Yu, Kun-Chieh

    2006-09-01

    By injecting the optical NRZ data into a Fabry-Perot laser diode (FPLD) synchronously modulated at below threshold condition or a semiconductor optical amplifier (SOA) gain-depleted with a backward injected clock stream, the all-optical non-return to zero (NRZ) to return-to-zero (RZ) format conversion of a STM-64 date-stream for synchronous digital hierarchy (SDH) or an OC-192 data stream for synchronous optical network (SONET) in high-speed fiber-optic communication link can be performed. Without the assistance of any complicated RF electronic circuitry, the output RZ data-stream at bit rate of up to 10 Gbit/s is successfully transformed in the optically NRZ injection-locked FPLD, in which the incoming NRZ data induces gain-switching of the FPLD without DC driving current or at below threshold condition. A power penalty of 1.2 dB is measured after NRZ-to-RZ transformation in the FPLD. Alternatively, the all-optical 10Gbits/s NRZ-to-RZ format conversion can also be demonstrated in a semiconductor optical amplifier under a backward dark-optical-comb injection with its duty-cycle 70%, which is obtained by reshaping from the received data clock at 10 GHz. The incoming optical NRZ data-stream is transformed into a pulsed RZ data-stream with its duty-cycle, rms timing jitter, and conversion gain of 15%, 4ps, and 3dB, respectively. In contrast to the FPLD, the SOA based NRZ-to-RZ converter exhibits an enhanced extinction ratio from 7 to 13 dB, and BER of 10 -13 at -18.5 dBm. In particular, the power penalty of the received RZ data-stream has greatly improved by 5 dB as compared to that obtained from FPLD.

  13. Knowledge representation in fuzzy logic

    NASA Technical Reports Server (NTRS)

    Zadeh, Lotfi A.

    1989-01-01

    The author presents a summary of the basic concepts and techniques underlying the application of fuzzy logic to knowledge representation. He then describes a number of examples relating to its use as a computational system for dealing with uncertainty and imprecision in the context of knowledge, meaning, and inference. It is noted that one of the basic aims of fuzzy logic is to provide a computational framework for knowledge representation and inference in an environment of uncertainty and imprecision. In such environments, fuzzy logic is effective when the solutions need not be precise and/or it is acceptable for a conclusion to have a dispositional rather than categorical validity. The importance of fuzzy logic derives from the fact that there are many real-world applications which fit these conditions, especially in the realm of knowledge-based systems for decision-making and control.

  14. Optically controlled waveplate at a telecom wavelength using a ladder transition in Rb atoms for all-optical switching and high speed Stokesmetric imaging.

    PubMed

    Krishnamurthy, Subramanian; Tu, Y; Wang, Y; Tseng, S; Shahriar, M S

    2014-11-17

    We demonstrate an optically controlled waveplate at ~1323 nm using the 5S(1/2)-5P(1/2)-6S(1/2) ladder transition in a Rb vapor cell. The lower leg of the transitions represents the control beam, while the upper leg represents the signal beam. We show that we can place the signal beam in any arbitrary polarization state with a suitable choice of polarization of the control beam. Specifically, we demonstrate a differential phase retardance of ~180 degrees between the two circularly polarized components of a linearly polarized signal beam. We also demonstrate that the system can act as a Quarter Wave plate. The optical activity responsible for the phase retardation process is explained in terms of selection rules involving the Zeeman sublevels. As such, the system can be used to realize a fast Stokesmetric imaging system with a speed of ~3 MHz. When implemented using a tapered nano fiber embedded in a vapor cell, this system can be used to realize an ultra-low power all-optical switch as well as a Quantum Zeno Effect based all-optical logic gate by combining it with an optically controlled polarizer, previously demonstrated by us. We present numerical simulations of the system using a comprehensive model which incorporates all the relevant Zeeman sub-levels in the system, using a novel algorithm recently developed by us for efficient computation of the evolution of an arbitrary large scale quantum system. PMID:25402129

  15. Alternative approach of developing all-optical Fredkin and Toffoli gates

    NASA Astrophysics Data System (ADS)

    Mandal, Dhoumendra; Mandal, Sumana; Garai, Sisir Kumar

    2015-09-01

    Reversible logic gates show potential roles in communication technology, and it has a wide area of applicability such as in sequential and combinational circuit of optical computing, optical signal processing, multi-valued logic operations, etc. because of its advantageous aspects of data-recovering capabilities, low power consumption, least power dissipation, faster speed of processing, less hardware complexity, etc. In a reversible logic gate not only the outputs can be determined from the inputs, but also the inputs can be uniquely recovered from the outputs. In this article an alternative approach has been made to develop three-input-output Fredkin and Toffoli gates using the frequency conversion property of semiconductor optical amplifier (SOA) and frequency-based beam routing by optical multiplexers and demultiplexers. Simulation results show the feasibility of our proposed scheme.

  16. All-optical design for inherently energy-conserving reversible gates and circuits.

    PubMed

    Cohen, Eyal; Dolev, Shlomi; Rosenblit, Michael

    2016-01-01

    As energy efficiency becomes a paramount issue in this day and age, reversible computing may serve as a critical step towards energy conservation in information technology. The inputs of reversible computing elements define the outputs and vice versa. Some reversible gates such as the Fredkin gate are also universal; that is, they may be used to produce any logic operation. It is possible to find physical representations for the information, so that when processed with reversible logic, the energy of the output is equal to the energy of the input. It is suggested that there may be devices that will do that without applying any additional power. Here, we present a formalism that may be used to produce any reversible logic gate. We implement this method over an optical design of the Fredkin gate, which utilizes only optical elements that inherently conserve energy. PMID:27113510

  17. All-optical design for inherently energy-conserving reversible gates and circuits

    PubMed Central

    Cohen, Eyal; Dolev, Shlomi; Rosenblit, Michael

    2016-01-01

    As energy efficiency becomes a paramount issue in this day and age, reversible computing may serve as a critical step towards energy conservation in information technology. The inputs of reversible computing elements define the outputs and vice versa. Some reversible gates such as the Fredkin gate are also universal; that is, they may be used to produce any logic operation. It is possible to find physical representations for the information, so that when processed with reversible logic, the energy of the output is equal to the energy of the input. It is suggested that there may be devices that will do that without applying any additional power. Here, we present a formalism that may be used to produce any reversible logic gate. We implement this method over an optical design of the Fredkin gate, which utilizes only optical elements that inherently conserve energy. PMID:27113510

  18. All-optical design for inherently energy-conserving reversible gates and circuits

    NASA Astrophysics Data System (ADS)

    Cohen, Eyal; Dolev, Shlomi; Rosenblit, Michael

    2016-04-01

    As energy efficiency becomes a paramount issue in this day and age, reversible computing may serve as a critical step towards energy conservation in information technology. The inputs of reversible computing elements define the outputs and vice versa. Some reversible gates such as the Fredkin gate are also universal; that is, they may be used to produce any logic operation. It is possible to find physical representations for the information, so that when processed with reversible logic, the energy of the output is equal to the energy of the input. It is suggested that there may be devices that will do that without applying any additional power. Here, we present a formalism that may be used to produce any reversible logic gate. We implement this method over an optical design of the Fredkin gate, which utilizes only optical elements that inherently conserve energy.

  19. Anomalous nonlinear absorption in epsilon-near-zero materials: optical limiting and all-optical control.

    PubMed

    Vincenti, M A; de Ceglia, D; Scalora, Michael

    2016-08-01

    We investigate nonlinear absorption in films of epsilon-near-zero materials. The combination of large local electric fields at the fundamental frequency and material losses at the harmonic frequencies induce unusual intensity-dependent phenomena. We predict that the second-order nonlinearity of a low-damping, epsilon-near-zero slab produces an optical limiting effect that mimics a two-photon absorption process. Anomalous absorption profiles that depend on low permittivity values at the pump frequency are also predicted for third-order nonlinearities. These findings suggest new opportunities for all-optical light control and novel ways to design reconfigurable and tunable nonlinear devices. PMID:27472631

  20. First demonstration of a staged all-optical laser wakefield acceleration

    SciTech Connect

    Kaganovich, D.; Ting, A.; Gordon, D.F.; Hubbard, R.F.; Jones, T.G.; Zigler, A.; Sprangle, P.

    2005-10-01

    A proof-of-principle experiment on staged all-optical laser wakefield acceleration was performed at the Naval Research Laboratory. Electrons with <1 MeV energy created by the interaction of a 2 TW laser beam with a nitrogen gas jet were injected and accelerated to more than 20 MeV in a plasma wakefield generated by a 10 TW laser beam in a helium gas jet. The energy gain occurred in a narrow time window of 3 ps between the injection and acceleration laser beams, and within a tight spatial alignment of {approx}10 {mu}m.

  1. All-Optical Steering of Laser-Wakefield-Accelerated Electron Beams

    SciTech Connect

    Popp, A.; Osterhoff, J.; Major, Zs.; Hoerlein, R.; Fuchs, M.; Weingartner, R.; Krausz, F.; Gruener, F.; Karsch, S.; Vieira, J.; Marti, M.; Fonseca, R. A.; Martins, S. F.; Silva, L. O.

    2010-11-19

    We investigate the influence of a tilted laser-pulse-intensity front on laser-wakefield acceleration. Such asymmetric light pulses may be exploited to obtain control over the electron-bunch-pointing direction and in our case allowed for reproducible electron-beam steering in an all-optical way within an 8 mrad opening window with respect to the initial laser axis. We also discovered evidence of collective electron-betatron oscillations due to off-axis electron injection into the wakefield induced by a pulse-front tilt. These findings are supported by 3D particle-in-cell simulations.

  2. All-optical steering of laser-wakefield-accelerated electron beams.

    PubMed

    Popp, A; Vieira, J; Osterhoff, J; Major, Zs; Hörlein, R; Fuchs, M; Weingartner, R; Rowlands-Rees, T P; Marti, M; Fonseca, R A; Martins, S F; Silva, L O; Hooker, S M; Krausz, F; Grüner, F; Karsch, S

    2010-11-19

    We investigate the influence of a tilted laser-pulse-intensity front on laser-wakefield acceleration. Such asymmetric light pulses may be exploited to obtain control over the electron-bunch-pointing direction and in our case allowed for reproducible electron-beam steering in an all-optical way within an 8 mrad opening window with respect to the initial laser axis. We also discovered evidence of collective electron-betatron oscillations due to off-axis electron injection into the wakefield induced by a pulse-front tilt. These findings are supported by 3D particle-in-cell simulations. PMID:21231309

  3. Coherent-population-trapping resonances with linearly polarized light for all-optical miniature atomic clocks

    SciTech Connect

    Zibrov, Sergei A.; Velichansky, Vladimir L.; Novikova, Irina; Phillips, David F.; Walsworth, Ronald L.; Zibrov, Alexander S.; Taichenachev, Alexey V.; Yudin, Valery I.

    2010-01-15

    We present a joint theoretical and experimental characterization of the coherent population trapping (CPT) resonance excited on the D{sub 1} line of {sup 87}Rb atoms by bichromatic linearly polarized laser light. We observe high-contrast transmission resonances (up to approx =25%), which makes this excitation scheme promising for miniature all-optical atomic clock applications. We also demonstrate cancellation of the first-order light shift by proper choice of the frequencies and relative intensities of the two laser-field components. Our theoretical predictions are in good agreement with the experimental results.

  4. Three-photon-absorption resonance for all-optical atomic clocks

    SciTech Connect

    Zibrov, Sergei; Novikova, Irina; Phillips, David F.; Taichenachev, Aleksei V.; Yudin, Valeriy I.; Walsworth, Ronald L.; Zibrov, Alexander S.

    2005-07-15

    We report an experimental study of an all-optical three-photon-absorption resonance (known as an 'N resonance') and discuss its potential application as an alternative to atomic clocks based on coherent population trapping. We present measurements of the N-resonance contrast, width and light shift for the D{sub 1} line of {sup 87}Rb with varying buffer gases, and find good agreement with an analytical model of this resonance. The results suggest that N resonances are promising for atomic clock applications.

  5. A novel ultrafast all-optical NRZ to RZ format converter based on Sagnac interferometric structure

    NASA Astrophysics Data System (ADS)

    Chen, Zhixin

    2008-11-01

    A simple novel ultrafast scheme of all-optical nonreturn-to-zero(NRZ) to return-to-zero(RZ) is proposed based on Sagnac interferometric structure. The operations of this scheme at 40Gbit/s 27-1 PRBS sequences are simulated correctly with the output extinction ratio more than 19.1dB. Through built theoretical model and numerical analysis, the operating characteristics of the scheme are illustrated. Furthermore, the carrier recovery time of the SOA is no more a crucial parameter to restrict the operation speed of this scheme.

  6. All-optical UWB signal generation and multicasting using a nonlinear optical loop mirror.

    PubMed

    Huang, Tianye; Li, Jia; Sun, Junqiang; Chen, Lawrence R

    2011-08-15

    An all-optical scheme for ultra-wideband (UWB) signal generation (positive and negative monocycle and doublet pulses) and multicasting using a nonlinear optical loop mirror (NOLM) is proposed and demonstrated. Five UWB signals (1 monocycle and 4 doublet pulses) are generated simultaneously from a single Gaussian optical pulse. The fractional bandwidths of the monocycle pulses are approximately 100% while those of the doublet pulses range from 100% to 133%. The UWB signals are then modulated using a 2(15)-1 pseudorandom bit sequence (PRBS) and error-free performance for each multicast channel is obtained. PMID:21934951

  7. All-optical UWB signal generation and multicasting using a nonlinear optical loop mirror

    NASA Astrophysics Data System (ADS)

    Huang, Tianye; Li, Jia; Sun, Junqiang; Chen, Lawrence R.

    2011-08-01

    An all-optical scheme for ultra-wideband (UWB) signal generation (positive and negative monocycle and doublet pulses) and multicasting using a nonlinear optical loop mirror (NOLM) is proposed and demonstrated. Five UWB signals (1 monocycle and 4 doublet pulses) are generated simultaneously from a single Gaussian optical pulse. The fractional bandwidths of the monocycle pulses are approximately 100% while those of the doublet pulses range from 100% to 133%. The UWB signals are then modulated using a 215 - 1 pseudorandom bit sequence (PRBS) and error-free performance for each multicast channel is obtained.

  8. Realization of an all-optical zero to pi cross-phase modulation jump.

    PubMed

    Camacho, Ryan M; Dixon, P Ben; Glasser, Ryan T; Jordan, Andrew N; Howell, John C

    2009-01-01

    We report on the experimental demonstration of an all-optical pi cross-phase modulation jump. By performing a preselection, an optically induced unitary transformation, and then a postselection on the polarization degree of freedom, the phase of the output beam acquires either a zero or pi phase shift (with no other possible values). The postselection results in optical loss in the output beam. An input state may be chosen near the resulting phase singularity, yielding a pi phase shift even for weak interaction strengths. The scheme is experimentally demonstrated using a coherently prepared dark state in a warm atomic cesium vapor. PMID:19257193

  9. All-optical trion generation in single-walled carbon nanotubes.

    PubMed

    Santos, Silvia M; Yuma, Bertrand; Berciaud, Stéphane; Shaver, Jonah; Gallart, Mathieu; Gilliot, Pierre; Cognet, Laurent; Lounis, Brahim

    2011-10-28

    We present evidence of all-optical trion generation and emission in pristine single-walled carbon nanotubes (SWCNTs). Luminescence spectra, recorded on individual SWCNTs over a large cw excitation intensity range, show trion emission peaks redshifted with respect to the bright exciton peak. Clear chirality dependence is observed for 22 separate SWCNT species, allowing for determination of electron-hole exchange interaction and trion binding energy contributions. Luminescence data together with ultrafast pump-probe experiments on chirality-sorted bulk samples suggest that exciton-exciton annihilation processes generate dissociated carriers that allow for trion creation upon a subsequent photon absorption event. PMID:22107671

  10. Single Shot Radiography Using an All-optical Compton Backscattering Source

    NASA Astrophysics Data System (ADS)

    Döpp, A.; Guillaume, E.; Thaury, C.; Gautier, J.; Lifschitz, A.; Conejero, E.; Ruiz, C.; Malka, V.; Rousse, A.; Phuoc, K. Ta

    The development of compact laser-based synchrotron sources is a field of active research. Here we present recent results on an all-optical Compton backscattering source using laser-accelerated electrons and a plasma mirror, as introduced in [K. Ta Phuoc et al., Nature Photonics 6 (5) (2012) 308-311]. Scattering of quasi-monoenergetic electrons of up to 200 MeV energy with their proper drive-beam leads to emission of femtosecond X-ray pulses, whose energies exceed 100 keV. We demonstrate that the photon yield from the source is sufficient to illuminate a centimeter-size sample placed 90 centimeters behind the source.

  11. Polarization insensitive all-optical wavelength conversion of polarization multiplexed signals using co-polarized pumps.

    PubMed

    Anthur, Aravind P; Zhou, Rui; O'Duill, Sean; Walsh, Anthony J; Martin, Eamonn; Venkitesh, Deepa; Barry, Liam P

    2016-05-30

    We study and experimentally validate the vector theory of four-wave mixing (FWM) in semiconductor optical amplifiers (SOA). We use the vector theory of FWM to design a polarization insensitive all-optical wavelength converter, suitable for advanced modulation formats, using non-degenerate FWM in SOAs and parallelly polarized pumps. We demonstrate the wavelength conversion of polarization-multiplexed (PM)-QPSK, PM-16QAM and a Nyquist WDM super-channel modulated with PM-QPSK signals at a baud rate of 12.5 GBaud, with total data rates of 50 Gbps, 100 Gbps and 200 Gbps respectively. PMID:27410100

  12. All-optical flip-flop operation based on bistability in V-cavity laser.

    PubMed

    Wu, Yingchen; Zhu, Yu; Liao, Xiaolu; Meng, Jianjun; He, Jian-Jun

    2016-06-13

    We theoretically analyzed and experimentally demonstrated an injection-locking based all-optical flip-flop memory using a simple and compact tunable V-cavity laser (VCL). A bistable region in the tuning characteristics of the VCL is employed for the flip-flop operation. The state of the VCL can be set and reset by injecting signal pulses at two different wavelengths. The pulse power for both set and reset signal is only about 1 pJ. Short response times of about 150 ps are measured for storing and erasing. PMID:27410271

  13. All-optical transistor based on a cavity optomechanical system with a Bose-Einstein condensate

    SciTech Connect

    Chen, Bin; Jiang, Cheng; Li, Jin-Jin; Zhu, Ka-Di

    2011-11-15

    We propose a scheme of an all-optical transistor based on a coupled Bose-Einstein condensate cavity system. The calculated results show that, in such an optomechanical system, the transmission of the probe beam is strongly dependent on the optical pump power. Therefore, the optical pump field can serve as a ''gate'' field of the transistor, effectively controlling the propagation of the probe field (the ''signal'' field). The scheme proposed here may have potential applications in optical communication and quantum information processing.

  14. All-optical atom surface traps implemented with one-dimensional planar diffractive microstructures.

    PubMed

    Alloschery, O; Mathevet, R; Weiner, J; Lezec, H J

    2006-12-25

    We characterize the loading, containment and optical properties of all-optical atom traps implemented by diffractive focusing with one-dimensional (1D) microstructures milled on gold films. These on-chip Fresnel lenses with focal lengths of the order of a few hundred microns produce optical-gradient-dipole traps. Cold atoms are loaded from a mirror magneto-optical trap (MMOT) centered a few hundred microns above the gold mirror surface. Details of loading optimization are reported and perspectives for future development of these structures are discussed. PMID:19532148

  15. All-optical mitigation of amplitude and phase-shift drift noise in semiconductor optical amplifiers

    NASA Astrophysics Data System (ADS)

    Rocha, Peterson; Gallep, Cristiano M.; Conforti, Evandro

    2015-10-01

    An all-optical scheme aimed at minimizing distortions induced by semiconductor optical amplifiers (SOAs) over modulated optical carriers is presented. The scheme employs an additional SOA properly biased to act as a saturated absorber, and thus counteract the distortions induced by the first amplifying device. The scheme here is demonstrated in silico, for 40 and 100 Gb/s (10 and 25 Gbaud, 16 QAM), with reasonable total gain (>20 dB) for symbol error rate below the forward error correction limit.

  16. Microwave photonic quadrature filter based on an all-optical programmable Hilbert transformer.

    PubMed

    Huang, Thomas X H; Yi, Xiaoke; Minasian, Robert A

    2011-11-15

    A microwave photonic quadrature filter, new to our knowledge, based on an all-optical Hilbert transformer is presented. It is based on mapping of a Hilbert transform transfer function between the optical and electrical domains, using a programmable Fourier-domain optical processor and high-speed photodiodes. The technique enables the realization of an extremely wide operating bandwidth, tunable programmable bandwidth, and a highly precise amplitude and phase response. Experimental results demonstrate a microwave quadrature filter from 10 to 20 GHz, which achieves an amplitude imbalance of less than ±0.23 dB and a phase imbalance of less than ±0.5°. PMID:22089590

  17. All optical controlled photonic integrated circuits using azo dye functionized sol-gel material

    NASA Astrophysics Data System (ADS)

    Ke, Xianjun

    The main focus of this dissertation is development and characterization of all-optical controllable azo dye functionized sol gel material, demonstrating a PIC fabrication technique on glass substrate using such material, and exploration and feasibility demonstration of three PIC functional devices namely optical variable attenuator, optical switches, and optical tunable filters using the material. The realization of all the devices in this dissertation are based on one material: dye functionalized sol-gel material. A photochromic sol-gel material functionalized with azo dye was synthesized and characterized. It possesses a photochromic characteristic under the control of green laser beam illumination. The material characteristics suggest the possibility of a new promising material platform candidate for the fabrication of alloptical controlled photonic integrated circuits. As the first potential application of the dye functionalized sol-gel material, an alloptical variable attenuator was designed and demonstrated. The optical variable attenuation is achieved in Mach-Zehnder interferometric configuration through all-optical modulation of sol-gel waveguide phase shifters. A 2 x 2 optical switch based on multimode interference (MMI) waveguide structure is proposed in the dissertation. The schematic configuration of the optical switch consists of a cascade of two identical MMIs with two all-optical controlled phase shifters realized by using the photochromic sol-gel material. The cross or bar switch state of the optical switch is determined by the phase difference between the two sol-gel waveguide phase shifters. An all-optical tunable filter is designed and its feasibility demonstrated by using the sol-gel photochromic material. Except for the phase change demonstrated on sol-gel waveguide phase shifters, dynamic gratings were observed on sol-gel film when exposed to two interference beams. This reveals the possibility of realizing Bragg grating-based tunable filters

  18. All-optical packet header and payload separation for un-slotted optical packet switched networks

    NASA Astrophysics Data System (ADS)

    Ji, Wei; Zhang, Min; Ye, Peida

    2005-11-01

    A novel all-optical header and payload separation technique that can be utilized in un-slotted optical packet switched networks is presented. The technique uses a modified TOAD for packet header extraction with differential modulation scheme and two SOAs that perform a simple XOR operation between the packet and its self-derived header to get the separated payload. The main virtue of this system is simple structure and need not any additional continuous pulses. Through numerical simulations, the operating characteristics of the scheme are illustrated. In addition, the parameters of the system are discussed and designed to optimize the operation performance.

  19. All-optical repetition rate multiplication of pseudorandom bit sequences by employing power coupler and equalizer

    NASA Astrophysics Data System (ADS)

    Sun, Zhenchao; Wang, Zhi; Wu, Chongqing; Wang, Fu; Li, Qiang

    2015-10-01

    A scheme for all-optical repetition rate multiplication of pseudorandom bit sequences (PRBS) is demonstrated with a precision delay feedback loop cascaded with a terahertz optical asymmetric demultiplexer (TOAD)-based power equalizer. Its feasibility has been verified by experiments, which show a multiplication for PRBS at cycle 2^7-1 from 2.5 to 10 Gb/s. This scheme can be employed for the rate multiplication of a much longer cycle PRBS at a much higher bit rate over 40 Gb/s if the time-delay, the loss, and the dispersion of an optical delay line are all precisely managed.

  20. Low light level all-optical switching in a four-level atom-cavity system

    NASA Astrophysics Data System (ADS)

    Duan, Yafan; Lin, Gongwei; Zhang, Shicheng; Niu, Yueping; Gong, Shangqing

    2016-01-01

    We report on an all-optical switching in a double ∧ four-level atom-cavity system both theoretically and experimentally. In this system, an extra coherence between two ground states is induced by two coupling lasers, thus the loss of the cavity field decreases. Then, we can use one weak field to control another weak field at low light levels. Compared to the three-level atom-cavity system, the power of the switching laser can be much weaker in the four-level atom-cavity system.

  1. All-optical modulation in wavelength-sized epsilon-near-zero media.

    PubMed

    Ciattoni, Alessandro; Marini, Andrea; Rizza, Carlo

    2016-07-01

    We investigate the interaction of two pulses (pump and probe) scattered by a nonlinear epsilon-near-zero (ENZ) slab whose thickness is comparable with the ENZ wavelength. We show that when the probe has a narrow spectrum localized around the ENZ wavelength, its transmission is dramatically affected by the intensity of the pump. Conversely, if the probe is not in the ENZ regime, its propagation is not noticeably affected by the pump. Such all-optical modulation is due to the oversensitive character of the ENZ regime, and it is so efficient that it even occurs in a wavelength thick slab. PMID:27367112

  2. Ultrafast defect dynamics: A new approach to all optical broadband switching employing amorphous selenium thin films

    NASA Astrophysics Data System (ADS)

    Sharma, Rituraj; Prasai, Kiran; Drabold, D. A.; Adarsh, K. V.

    2015-07-01

    Optical switches offer higher switching speeds than electronics, however, in most cases utilizing the interband transitions of the active medium for switching. As a result, the signal suffers heavy losses. In this article, we demonstrate a simple and yet efficient ultrafast broadband all-optical switching on ps timescale in the sub-bandgap region of the a-Se thin film, where the intrinsic absorption is very weak. The optical switching is attributed to short-lived transient defects that form localized states in the bandgap and possess a large electron-phonon coupling. We model these processes through first principles simulation that are in agreement with the experiments.

  3. All-optical tunable multilevel amplitude regeneration based on coherent wave mixing using a polarizer.

    PubMed

    Bakhtiari, Zahra; Sawchuk, Alexander A

    2015-04-20

    We describe and demonstrate an all-optical tunable phase- preserving scheme for multilevel amplitude regeneration based on coherent optical wave mixing using a polarizer for optical star 8-quadrature-amplitude modulation (star-8QAM) and star-16QAM signals with a power ratio of 1:5. Amplitude noise can be efficiently suppressed on both amplitude levels. A regeneration factor of nearly 5 for the higher-amplitude level of star-8QAM and 3 for lower-amplitude level are achieved. The system robustness against nonlinear phase noise originating from the Gordon-Mollenauer effect in a 150 km transmission line is investigated using the proposed amplitude regenerator. PMID:25969093

  4. All-optical KarhunenLoeve Transform Using Multimode Interference Structures on Silicon Nanowires

    NASA Astrophysics Data System (ADS)

    Le, Trung-Thanh

    2011-12-01

    A variety of unitary transforms have attracted considerable attention for their application in data, image compression and other signal processing applications. Among many transforms, the KarhunenLoeve transform (KLT) is known to be optimal because of its advantages of computational efficiency, residual correlation and rate distortion criterion. In this paper, it is shown that the all-optical KarhunenLoeve transform can be realized using multimode interference (MMI) structures on silicon wire waveguides. The transfer matrix method (TMM) and the beam propagation method (BPM) are used to verify and optimally design the proposed devices.

  5. Synthesis and characterization of azo-containing organometallic thin films for all optical switching applications

    NASA Astrophysics Data System (ADS)

    Gatri, R.; Fillaut, J.-L.; Mysliwiec, J.; Szukalski, A.; Bartkiewicz, S.; El-Ouazzani, H.; Guezguez, I.; Khammar, F.; Sahraoui, B.

    2012-05-01

    Novel photoresponsive materials based on azo-containing bifunctional ruthenium-acetylides have been synthesized. All optical switching based on the Optical Kerr Effect in the organometallic thin films based on ruthenium(II) acetylides containing an azobenzene moiety as a photochromic unit in the main pi-conjugated system dispersed in a poly(methyl methacrylate) matrix has been observed. The excitation beam was delivered from a picosecond laser at wavelength 532 nm while dynamics of induced sample birefringence was probed by a non-absorbed linearly polarized beam of cw He-Ne laser (632.8 nm). The influence of ruthenium part on dynamics of molecular motions has been shown.

  6. Low-power all-optical tunable plasmonic-mode coupling in nonlinear metamaterials

    SciTech Connect

    Zhang, Fan; Yang, Hong; Hu, Xiaoyong E-mail: qhgong@pku.edu.cn; Gong, Qihuang E-mail: qhgong@pku.edu.cn

    2014-03-31

    All-optical tunable plasmonic-mode coupling is realized in a nonlinear photonic metamaterial consisting of periodic arrays of gold asymmetrically split ring resonators, covered with a poly[(methyl methacrylate)-co-(disperse red 13 acrylate)] azobenzene polymer layer. The third-order optical nonlinearity of the azobenzene polymer is enormously enhanced by using resonant excitation. Under excitation with a 17-kW/cm{sup 2}, 532-nm pump light, plasmonic modes shift by 51 nm and the mode interval is enlarged by 30 nm. Compared with previous reports, the threshold pump intensity is reduced by five orders of magnitude, while extremely large tunability is maintained.

  7. Ultrafast defect dynamics: A new approach to all optical broadband switching employing amorphous selenium thin films

    SciTech Connect

    Sharma, Rituraj; Adarsh, K. V. E-mail: adarsh@iiserb.ac.in; Prasai, Kiran; Drabold, D. A. E-mail: adarsh@iiserb.ac.in

    2015-07-15

    Optical switches offer higher switching speeds than electronics, however, in most cases utilizing the interband transitions of the active medium for switching. As a result, the signal suffers heavy losses. In this article, we demonstrate a simple and yet efficient ultrafast broadband all-optical switching on ps timescale in the sub-bandgap region of the a-Se thin film, where the intrinsic absorption is very weak. The optical switching is attributed to short-lived transient defects that form localized states in the bandgap and possess a large electron-phonon coupling. We model these processes through first principles simulation that are in agreement with the experiments.

  8. All-optical encryption based on interleaved waveband switching modulation for optical network security.

    PubMed

    Fok, Mable P; Prucnal, Paul R

    2009-05-01

    All-optical encryption for optical code-division multiple-access systems with interleaved waveband-switching modulation is experimentally demonstrated. The scheme explores dual-pump four-wave mixing in a 35 cm highly nonlinear bismuth oxide fiber to achieve XOR operation of the plaintext and the encryption key. Bit 0 and bit 1 of the encrypted data are represented by two different wavebands. Unlike on-off keying encryption methods, the encrypted data in this approach has the same intensity for both bit 0 and bit 1. Thus no plaintext or ciphertext signatures are observed. PMID:19412257

  9. Spectrally-efficient all-optical OFDM by WSS and AWG.

    PubMed

    Hoxha, J; Morosi, J; Shimizu, S; Martelli, P; Boffi, P; Wada, N; Cincotti, G

    2015-05-01

    We report on the transmission experiment of seven 12.5-GHz spaced all optical-orthogonal frequency division multiplexed (AO-OFDM) subcarriers over a 35-km fiber link, using differential quadrature phase shift keying (DQPSK) modulation and direct detection. The system does not require chromatic dispersion compensation, optical time gating at the receiver (RX) or cyclic prefix (CP), achieving the maximum spectral efficiency. We use a wavelength selective switch (WSS) at the transmitter (TX) to allow subcarrier assignment flexibility and optimal filter shaping; an arrayed waveguide grating (AWG) AO-OFDM demultiplexer is used at the RX, to reduce the system cost and complexity. PMID:25969193

  10. Analysis of all-optical temporal integrator employing phased-shifted DFB-SOA.

    PubMed

    Jia, Xin-Hong; Ji, Xiao-Ling; Xu, Cong; Wang, Zi-Nan; Zhang, Wei-Li

    2014-11-17

    All-optical temporal integrator using phase-shifted distributed-feedback semiconductor optical amplifier (DFB-SOA) is investigated. The influences of system parameters on its energy transmittance and integration error are explored in detail. The numerical analysis shows that, enhanced energy transmittance and integration time window can be simultaneously achieved by increased injected current in the vicinity of lasing threshold. We find that the range of input pulse-width with lower integration error is highly sensitive to the injected optical power, due to gain saturation and induced detuning deviation mechanism. The initial frequency detuning should also be carefully chosen to suppress the integration deviation with ideal waveform output. PMID:25402095

  11. An All-Optical Event Horizon in an Optical Analogue of a Laval Nozzle

    NASA Astrophysics Data System (ADS)

    Elazar, Moshe; Bar-Ad, Shimshon; Fleurov, Victor; Schilling, Rolf

    The formal analogy between the propagation of coherent light in a medium with Kerr nonlinearity and the flow of a dissipationless liquid is exploited in a demonstration of an all-optical event horizon in an optical analogue of the aeronautical Laval nozzle. This establishes a unique experimental platform, in which one can observe and study very unusual dynamics of classical and quantum fluctuations, and in particular an analogue of the Hawking radiation emitted by astrophysical black holes. We present a detailed theoretical analysis of these dynamics, and demonstrate experimentally the formation of such an event horizon in a suitably-shaped waveguide structure.

  12. All-optical 100-Gbit s word packet time-division-multiplexed access node in a looped-back configuration: enabling technologies for sequential add drop functionality

    NASA Astrophysics Data System (ADS)

    Lou, Janet W.; Liang, Yi; Boyraz, Ozdal; Islam, Mohammed N.

    2000-10-01

    We experimentally demonstrate the adding, dropping, and passing through of 100-Gbit s word packets in a looped-back all-optical time-division-multiplexed (TDM) access node. Packets are routed with a 17-dB contrast ratio and demultiplexed with a 20-dB contrast ratio. This node uses short 100-Gbit s words to demonstrate its potential to process data packets from multiple sources and to perform packet switching in a multinode ring network configuration. The ability to tolerate timing jitter as well as varying input signal characteristics is essential to an all-optical access node in a multinode network. For 2-ps input pulses, the header processor has a timing window of 5 ps, and the demultiplexer has a timing window of 5.5 ps. This allows for tolerance to bit-to-bit timing jitters or to an increase in the pulse width of as much as 3 ps. Packet-to-packet timing jitter is detected and compensated by the technique used to synchronize the local source to each packet. The key enabling technologies of an all-optical TDM packet add drop multiplexer are discussed, including an erbium-doped fiber laser, a nonlinear optical loop mirror logic gate, self-synchronization to incoming packets with a fast-saturation slow-recovery gain element followed by an intensity discriminator, a two-wavelength nonlinear optical loop mirror demultiplexer, and synchronization of new packets to the network packet rate with a phase-locked loop. The local source is automatically synchronized to the incoming packet, because it uses an extracted pulse from the packet, which has a contrast ratio of 20 dB to the rest of the packet. Finally, new packets are added by use of a local laser and a synchronization method, which gives a timing jitter of 1 ps. Using a statistical method of measuring Q value with picosecond resolution, we show that a header processor with two cascaded logic gates has a Q value of 7.1 with a 95% confidence level.

  13. All-optical coherent population trapping with defect spin ensembles in silicon carbide

    PubMed Central

    Zwier, Olger V.; O’Shea, Danny; Onur, Alexander R.; van der Wal, Caspar H.

    2015-01-01

    Divacancy defects in silicon carbide have long-lived electronic spin states and sharp optical transitions. Because of the various polytypes of SiC, hundreds of unique divacancies exist, many with spin properties comparable to the nitrogen-vacancy center in diamond. If ensembles of such spins can be all-optically manipulated, they make compelling candidate systems for quantum-enhanced memory, communication, and sensing applications. We report here direct all-optical addressing of basal plane-oriented divacancy spins in 4H-SiC. By means of magneto-spectroscopy, we fully identify the spin triplet structure of both the ground and the excited state, and use this for tuning of transition dipole moments between particular spin levels. We also identify a role for relaxation via intersystem crossing. Building on these results, we demonstrate coherent population trapping -a key effect for quantum state transfer between spins and photons- for divacancy sub-ensembles along particular crystal axes. These results, combined with the flexibility of SiC polytypes and device processing, put SiC at the forefront of quantum information science in the solid state. PMID:26047132

  14. Design of an All-Optical Network Based on LCoS Technologies

    NASA Astrophysics Data System (ADS)

    Cheng, Yuh-Jiuh; Shiau, Yhi

    2016-06-01

    In this paper, an all-optical network composed of the ROADMs (reconfigurable optical add-drop multiplexer), L2/L3 optical packet switches, and the fiber optical cross-connection for fiber scheduling and measurement based on LCoS (liquid crystal on silicon) technologies is proposed. The L2/L3 optical packet switches are designed with optical output buffers. Only the header of optical packets is converted to electronic signals to control the wavelength of input ports and the packet payloads can be transparently destined to their output ports. An optical output buffer is designed to queue the packets when more than one incoming packet should reach to the same destination output port. For preserving service-packet sequencing and fairness of routing sequence, a priority scheme and a round-robin algorithm are adopted at the optical output buffer. The wavelength of input ports is designed for routing incoming packets using LCoS technologies. Finally, the proposed OFS (optical flow switch) with input buffers can quickly transfer the big data to the output ports and the main purpose of the OFS is to reduce the number of wavelength reflections. The all-optical content delivery network is comprised of the OFSs for a large amount of audio and video data transmissions in the future.

  15. Experimental validation of optical layer performance monitoring using an all-optical network testbed

    NASA Astrophysics Data System (ADS)

    Vukovic, Alex; Savoie, Michel J.; Hua, Heng

    2004-11-01

    Communication transmission systems continue to evolve towards higher data rates, increased wavelength densities, longer transmission distances and more intelligence. Further development of dense wavelength division multiplexing (DWDM) and all-optical networks (AONs) will demand ever-tighter monitoring to assure a specified quality of service (QoS). Traditional monitoring methods have been proven to be insufficient. Higher degree of self-control, intelligence and optimization for functions within next generation networks require new monitoring schemes to be developed and deployed. Both perspective and challenges of performance monitoring, its techniques, requirements and drivers are discussed. It is pointed out that optical layer monitoring is a key enabler for self-control of next generation optical networks. Aside from its real-time feedback and the safeguarding of neighbouring channels, optical performance monitoring ensures the ability to build and control complex network topologies while maintaining an efficiently high QoS. Within an all-optical network testbed environment, key performance monitoring parameters are identified, assessed through real-time proof-of-concept, and proposed for network applications for the safeguarding of neighbouring channels in WDM systems.

  16. Ultrasmall all-optical plasmonic switch and its application to superresolution imaging

    PubMed Central

    Wu, Hsueh-Yu; Huang, Yen-Ta; Shen, Po-Ting; Lee, Hsuan; Oketani, Ryosuke; Yonemaru, Yasuo; Yamanaka, Masahito; Shoji, Satoru; Lin, Kung-Hsuan; Chang, Chih-Wei; Kawata, Satoshi; Fujita, Katsumasa; Chu, Shi-Wei

    2016-01-01

    Because of their exceptional local-field enhancement and ultrasmall mode volume, plasmonic components can integrate photonics and electronics at nanoscale, and active control of plasmons is the key. However, all-optical modulation of plasmonic response with nanometer mode volume and unity modulation depth is still lacking. Here we show that scattering from a plasmonic nanoparticle, whose volume is smaller than 0.001 μm3, can be optically switched off with less than 100 μW power. Over 80% modulation depth is observed, and shows no degradation after repetitive switching. The spectral bandwidth approaches 100 nm. The underlying mechanism is suggested to be photothermal effects, and the effective single-particle nonlinearity reaches nearly 10−9 m2/W, which is to our knowledge the largest record of metallic materials to date. As a novel application, the non-bleaching and unlimitedly switchable scattering is used to enhance optical resolution to λ/5 (λ/9 after deconvolution), with 100-fold less intensity requirement compared to similar superresolution techniques. Our work not only opens up a new field of ultrasmall all-optical control based on scattering from a single nanoparticle, but also facilitates superresolution imaging for long-term observation. PMID:27063920

  17. Ultrasmall all-optical plasmonic switch and its application to superresolution imaging.

    PubMed

    Wu, Hsueh-Yu; Huang, Yen-Ta; Shen, Po-Ting; Lee, Hsuan; Oketani, Ryosuke; Yonemaru, Yasuo; Yamanaka, Masahito; Shoji, Satoru; Lin, Kung-Hsuan; Chang, Chih-Wei; Kawata, Satoshi; Fujita, Katsumasa; Chu, Shi-Wei

    2016-01-01

    Because of their exceptional local-field enhancement and ultrasmall mode volume, plasmonic components can integrate photonics and electronics at nanoscale, and active control of plasmons is the key. However, all-optical modulation of plasmonic response with nanometer mode volume and unity modulation depth is still lacking. Here we show that scattering from a plasmonic nanoparticle, whose volume is smaller than 0.001 μm(3), can be optically switched off with less than 100 μW power. Over 80% modulation depth is observed, and shows no degradation after repetitive switching. The spectral bandwidth approaches 100 nm. The underlying mechanism is suggested to be photothermal effects, and the effective single-particle nonlinearity reaches nearly 10(-9) m(2)/W, which is to our knowledge the largest record of metallic materials to date. As a novel application, the non-bleaching and unlimitedly switchable scattering is used to enhance optical resolution to λ/5 (λ/9 after deconvolution), with 100-fold less intensity requirement compared to similar superresolution techniques. Our work not only opens up a new field of ultrasmall all-optical control based on scattering from a single nanoparticle, but also facilitates superresolution imaging for long-term observation. PMID:27063920

  18. High Speed All Optical Nyquist Signal Generation and Full-band Coherent Detection

    PubMed Central

    Zhang, Junwen; Yu, Jianjun; Fang, Yuan; Chi, Nan

    2014-01-01

    Spectrum efficient data transmission is of key interest for high capacity optical communication systems considering the limited available bandwidth. Transmission of the high speed signal with higher-order modulation formats within the Nyquist bandwidth using coherent detection brings attractive performance advantages. However, high speed Nyquist signal generation with high order modulation formats is challenging. Electrical Nyquist pulse generation is restricted by the limited sampling rate and processor capacities of digital-to-analog convertor devices, while the optical Nyquist signals can provide a much higher symbol rate using time domain multiplexing method. However, most optical Nyquist signals are based on direct detection with simple modulation formats. Here we report the first experimental demonstration of high speed all optical Nyquist signal generation based on Sinc-shaped pulse generation and time-division multiplexing with high level modulation format and full-band coherent detection. Our experiments demonstrate a highly flexible and compatible all optical high speed Nyquist signal generation and detection scheme for future fiber communication systems. PMID:25142269

  19. Ultrafast all-optical temporal differentiation in integrated phase-shifted Bragg gratings

    NASA Astrophysics Data System (ADS)

    Rutkowska, Katarzyna A.; Duchesne, David; Strain, Michael J.; Azana, José; Morandotti, Roberto; Sorel, Marc

    2010-12-01

    All-optical communications and data processing exemplifies an important alternative to overcome the speed and bandwidth limitations imposed by electronics. Specifically, practical implementation of analog operations, including optical temporal differentiation, is fundamental for future ultrafast signal processing and computing networks. In addition, the development of fully integrated systems that allow on-single-chip operations is of significant interest. In this work we report the design, fabrication tolerances and first experimental demonstration of an integrated, ultrafast differentiator based on π-phase-shifted Bragg gratings. By using deeply-sidewall-etched Silicon-on-Insulator (SOI) ridged waveguides, first-order optical differentiation has been achieved on sub-millimeters length scales, reaching THz processing speeds. The proposed device has numerous potential applications, including all-optical, analog solving of differential equations (important for virtual modeling of scientific phenomena)1, data processing and analysis2, as well as for the generation of Hermite-Gaussian waveforms (used for arbitrary optical coding and decoding)3.

  20. All-optical coherent population trapping with defect spin ensembles in silicon carbide.

    PubMed

    Zwier, Olger V; O'Shea, Danny; Onur, Alexander R; van der Wal, Caspar H

    2015-01-01

    Divacancy defects in silicon carbide have long-lived electronic spin states and sharp optical transitions. Because of the various polytypes of SiC, hundreds of unique divacancies exist, many with spin properties comparable to the nitrogen-vacancy center in diamond. If ensembles of such spins can be all-optically manipulated, they make compelling candidate systems for quantum-enhanced memory, communication, and sensing applications. We report here direct all-optical addressing of basal plane-oriented divacancy spins in 4H-SiC. By means of magneto-spectroscopy, we fully identify the spin triplet structure of both the ground and the excited state, and use this for tuning of transition dipole moments between particular spin levels. We also identify a role for relaxation via intersystem crossing. Building on these results, we demonstrate coherent population trapping -a key effect for quantum state transfer between spins and photons- for divacancy sub-ensembles along particular crystal axes. These results, combined with the flexibility of SiC polytypes and device processing, put SiC at the forefront of quantum information science in the solid state. PMID:26047132

  1. All-optical electrophysiology in mammalian neurons using engineered microbial rhodopsins

    PubMed Central

    Hochbaum, Daniel R.; Zhao, Yongxin; Farhi, Samouil L.; Klapoetke, Nathan; Werley, Christopher A.; Kapoor, Vikrant; Zou, Peng; Kralj, Joel M.; Maclaurin, Dougal; Smedemark-Margulies, Niklas; Saulnier, Jessica L.; Boulting, Gabriella L.; Straub, Christoph; Cho, Yong Ku; Melkonian, Michael; Wong, Gane Ka-Shu; Harrison, D. Jed; Murthy, Venkatesh N.; Sabatini, Bernardo; Boyden, Edward S.; Campbell, Robert E.; Cohen, Adam E.

    2014-01-01

    All-optical electrophysiology—spatially resolved simultaneous optical perturbation and measurement of membrane voltage—would open new vistas in neuroscience research. We evolved two archaerhodopsin-based voltage indicators, QuasAr1 and 2, which show improved brightness and voltage sensitivity, microsecond response times, and produce no photocurrent. We engineered a novel channelrhodopsin actuator, CheRiff, which shows improved light sensitivity and kinetics, and spectral orthogonality to the QuasArs. A co-expression vector, Optopatch, enabled crosstalk-free genetically targeted all-optical electrophysiology. In cultured neurons, we combined Optopatch with patterned optical excitation to probe back-propagating action potentials in dendritic spines, synaptic transmission, sub-cellular microsecond-timescale details of action potential propagation, and simultaneous firing of many neurons in a network. Optopatch measurements revealed homeostatic tuning of intrinsic excitability in human stem cell-derived neurons. In brain slice, Optopatch induced and reported action potentials and subthreshold events, with high signal-to-noise ratios. The Optopatch platform enables high-throughput, spatially resolved electrophysiology without use of conventional electrodes. PMID:24952910

  2. Ultrasmall all-optical plasmonic switch and its application to superresolution imaging

    NASA Astrophysics Data System (ADS)

    Wu, Hsueh-Yu; Huang, Yen-Ta; Shen, Po-Ting; Lee, Hsuan; Oketani, Ryosuke; Yonemaru, Yasuo; Yamanaka, Masahito; Shoji, Satoru; Lin, Kung-Hsuan; Chang, Chih-Wei; Kawata, Satoshi; Fujita, Katsumasa; Chu, Shi-Wei

    2016-04-01

    Because of their exceptional local-field enhancement and ultrasmall mode volume, plasmonic components can integrate photonics and electronics at nanoscale, and active control of plasmons is the key. However, all-optical modulation of plasmonic response with nanometer mode volume and unity modulation depth is still lacking. Here we show that scattering from a plasmonic nanoparticle, whose volume is smaller than 0.001 μm3, can be optically switched off with less than 100 μW power. Over 80% modulation depth is observed, and shows no degradation after repetitive switching. The spectral bandwidth approaches 100 nm. The underlying mechanism is suggested to be photothermal effects, and the effective single-particle nonlinearity reaches nearly 10‑9 m2/W, which is to our knowledge the largest record of metallic materials to date. As a novel application, the non-bleaching and unlimitedly switchable scattering is used to enhance optical resolution to λ/5 (λ/9 after deconvolution), with 100-fold less intensity requirement compared to similar superresolution techniques. Our work not only opens up a new field of ultrasmall all-optical control based on scattering from a single nanoparticle, but also facilitates superresolution imaging for long-term observation.

  3. All-optical formation of coherent dark states of silicon-vacancy spins in diamond.

    PubMed

    Pingault, Benjamin; Becker, Jonas N; Schulte, Carsten H H; Arend, Carsten; Hepp, Christian; Godde, Tillmann; Tartakovskii, Alexander I; Markham, Matthew; Becher, Christoph; Atatüre, Mete

    2014-12-31

    Spin impurities in diamond can be versatile tools for a wide range of solid-state-based quantum technologies, but finding spin impurities that offer sufficient quality in both photonic and spin properties remains a challenge for this pursuit. The silicon-vacancy center has recently attracted much interest because of its spin-accessible optical transitions and the quality of its optical spectrum. Complementing these properties, spin coherence is essential for the suitability of this center as a spin-photon quantum interface. Here, we report all-optical generation of coherent superpositions of spin states in the ground state of a negatively charged silicon-vacancy center using coherent population trapping. Our measurements reveal a characteristic spin coherence time, T2*, exceeding 45 nanoseconds at 4 K. We further investigate the role of phonon-mediated coupling between orbital states as a source of irreversible decoherence. Our results indicate the feasibility of all-optical coherent control of silicon-vacancy spins using ultrafast laser pulses. PMID:25615329

  4. Formation and all-optical control of optical patterns in semiconductor microcavities

    NASA Astrophysics Data System (ADS)

    Binder, R.; Tsang, C. Y.; Tse, Y. C.; Luk, M. H.; Kwong, N. H.; Chan, Chris K. P.; Leung, P. T.; Lewandowski, P.; Schumacher, Stefan; Lafont, O.; Baudin, E.; Tignon, J.

    2016-05-01

    Semiconductor microcavities offer a unique way to combine transient all-optical manipulation of GaAs quantum wells with the benefits of structural advantages of microcavities. In these systems, exciton-polaritons have dispersion relations with very small effective masses. This has enabled prominent effects, for example polaritonic Bose condensation, but it can also be exploited for the design of all-optical communication devices. The latter involves non-equilibrium phase transitions in the spatial arrangement of exciton-polaritons. We consider the case of optical pumping with normal incidence, yielding a spatially homogeneous distribution of exciton-polaritons in optical cavities containing the quantum wells. Exciton-exciton interactions can trigger instabilities if certain threshold behavior requirements are met. Such instabilities can lead, for example, to the spontaneous formation of hexagonal polariton lattices (corresponding to six-spot patterns in the far field), or to rolls (corresponding to two-spot far field patterns). The competition among these patterns can be controlled to a certain degree by applying control beams. In this paper, we summarize the theory of pattern formation and election in microcavities and illustrate the switching between patterns via simulation results.

  5. Nonlinear all-optical switch based on a white-light cavity

    NASA Astrophysics Data System (ADS)

    Li, Na; Xu, Jingping; Song, Ge; Zhu, Chengjie; Xie, Shuangyuan; Yang, Yaping; Zubairy, M. Suhail; Zhu, Shi-Yao

    2016-04-01

    It is well known that there is a bottleneck for nonlinear all-optical switching, namely, the switching power and the switching time cannot be lowered simultaneously. A lower switching power requires a resonator with a high quality (Q ) factor, but leads to a longer switching time. We propose to overcome this bottleneck by replacing the nonlinear cavity in such an all-optical switch by a white-light cavity. This can be done by doping three-level atoms in the ring resonator and applying incoherent pump and coherent driving fields on it. The white-light cavity possesses broadband resonance in a linear region. Therefore, for the incident pulse, a broad range of frequency components can take part in the nonlinear process, and so it requires lower power to achieve switching compared to the conventional ring resonator. On the other hand, the refractive index of a white-light cavity has negative dispersion, leading to a fast group velocity. This results in a shorter time to build up the resonant response, yielding a short switching time.

  6. High-resolution all-optical photoacoustic imaging system for remote interrogation of biological specimens

    NASA Astrophysics Data System (ADS)

    Sampathkumar, Ashwin

    2014-05-01

    Conventional photoacoustic imaging (PAI) employs light pulses to produce a photoacoustic (PA) effect and detects the resulting acoustic waves using an ultrasound transducer acoustically coupled to the target tissue. The resolution of conventional PAI is limited by the sensitivity and bandwidth of the ultrasound transducer. We have developed an all-optical versatile PAI system for characterizing ex vivo and in vivo biological specimens. The system employs noncontact interferometric detection of the acoustic signals that overcomes limitations of conventional PAI. A 532-nm pump laser with a pulse duration of 5 ns excited the PA effect in tissue. Resulting acoustic waves produced surface displacements that were sensed using a 532-nm continuous-wave (CW) probe laser in a Michelson interferometer with a GHz bandwidth. The pump and probe beams were coaxially focused using a 50X objective giving a diffraction-limited spot size of 0.48 μm. The phase-encoded probe beam was demodulated using a homodyne interferometer. The detected time-domain signal was time reversed using k-space wave-propagation methods to produce a spatial distribution of PA sources in the target tissue. Performance was assessed using PA images of ex vivo rabbit lymph node specimens and human tooth samples. A minimum peak surface displacement sensitivity of 0.19 pm was measured. The all-optical PAI (AOPAI) system is well suited for assessment of retinal diseases, caries lesion detection, skin burns, section less histology and pressure or friction ulcers.

  7. Electrical characterization of all-optical helicity-dependent switching in ferromagnetic Hall crosses

    NASA Astrophysics Data System (ADS)

    El Hadri, M. S.; Pirro, P.; Lambert, C.-H.; Bergeard, N.; Petit-Watelot, S.; Hehn, M.; Malinowski, G.; Montaigne, F.; Quessab, Y.; Medapalli, R.; Fullerton, E. E.; Mangin, S.

    2016-02-01

    We present an experimental study of all-optical helicity-dependent switching (AO-HDS) of ferromagnetic Pt/Co/Pt heterostructures with perpendicular magnetic anisotropy. The sample is patterned into a Hall cross and the AO-HDS is measured via the anomalous Hall effect. This all-electrical probing of the magnetization during AO-HDS enables a statistical quantification of the switching ratio for different laser parameters, such as the threshold power to achieve AO-HDS and the exposure time needed to reach complete switching at a given laser power. We find that the AO-HDS is a cumulative process, a certain number of optical pulses is needed to obtain a full and reproducible helicity-dependent switching. The deterministic switching of the ferromagnetic Pt/Co/Pt Hall cross provides a full "opto-spintronic device," where the remanent magnetization can be all-optically and reproducibly written and erased without the need of an external magnetic field.

  8. Engineered materials for all-optical helicity-dependent magnetic switching.

    PubMed

    Mangin, S; Gottwald, M; Lambert, C-H; Steil, D; Uhlíř, V; Pang, L; Hehn, M; Alebrand, S; Cinchetti, M; Malinowski, G; Fainman, Y; Aeschlimann, M; Fullerton, E E

    2014-03-01

    The possibility of manipulating magnetic systems without applied magnetic fields have attracted growing attention over the past fifteen years. The low-power manipulation of the magnetization, preferably at ultrashort timescales, has become a fundamental challenge with implications for future magnetic information memory and storage technologies. Here we explore the optical manipulation of the magnetization in engineered magnetic materials. We demonstrate that all-optical helicity-dependent switching (AO-HDS) can be observed not only in selected rare earth-transition metal (RE-TM) alloy films but also in a much broader variety of materials, including RE-TM alloys, multilayers and heterostructures. We further show that RE-free Co-Ir-based synthetic ferrimagnetic heterostructures designed to mimic the magnetic properties of RE-TM alloys also exhibit AO-HDS. These results challenge present theories of AO-HDS and provide a pathway to engineering materials for future applications based on all-optical control of magnetic order. PMID:24531398

  9. New alternative approach to all-optical flip-flop with nonlinear material

    NASA Astrophysics Data System (ADS)

    Giri, Dibyendu; Das, Partha Pratima

    2010-07-01

    Due to its inherent parallelism and tremendous operational speed, optical signal is the most suitable for data processing and digital communication in various fields. Conventional electronic and opto-electronic systems are unable to fulfill this arena, because of their low speed and time delay. In the case of pure electronic flip-flop, when a switch is turned ON, there is notable propagation delay on the order of nanoseconds. For an opto-electronic flip-flop although the propagation delay time is much less than that of an electronic flip-flop (about 10 to 100 times less), there are many disadvantages. Some of these disadvantages are delay of response time due to the use of spatial light modulators, an O/E converter that does not operate at all frequencies or wavelengths, and the unavailability of such materials. An optical input encoding methodology is proposed for the performance of all-optical flip-flop operations possible for two inputs. These operations were conducted in all-optical mode and are parallel in nature. All the operations are treated with proper exploitation of some nonlinear materials.

  10. All-optical electrophysiology in mammalian neurons using engineered microbial rhodopsins.

    PubMed

    Hochbaum, Daniel R; Zhao, Yongxin; Farhi, Samouil L; Klapoetke, Nathan; Werley, Christopher A; Kapoor, Vikrant; Zou, Peng; Kralj, Joel M; Maclaurin, Dougal; Smedemark-Margulies, Niklas; Saulnier, Jessica L; Boulting, Gabriella L; Straub, Christoph; Cho, Yong Ku; Melkonian, Michael; Wong, Gane Ka-Shu; Harrison, D Jed; Murthy, Venkatesh N; Sabatini, Bernardo L; Boyden, Edward S; Campbell, Robert E; Cohen, Adam E

    2014-08-01

    All-optical electrophysiology-spatially resolved simultaneous optical perturbation and measurement of membrane voltage-would open new vistas in neuroscience research. We evolved two archaerhodopsin-based voltage indicators, QuasAr1 and QuasAr2, which show improved brightness and voltage sensitivity, have microsecond response times and produce no photocurrent. We engineered a channelrhodopsin actuator, CheRiff, which shows high light sensitivity and rapid kinetics and is spectrally orthogonal to the QuasArs. A coexpression vector, Optopatch, enabled cross-talk-free genetically targeted all-optical electrophysiology. In cultured rat neurons, we combined Optopatch with patterned optical excitation to probe back-propagating action potentials (APs) in dendritic spines, synaptic transmission, subcellular microsecond-timescale details of AP propagation, and simultaneous firing of many neurons in a network. Optopatch measurements revealed homeostatic tuning of intrinsic excitability in human stem cell-derived neurons. In rat brain slices, Optopatch induced and reported APs and subthreshold events with high signal-to-noise ratios. The Optopatch platform enables high-throughput, spatially resolved electrophysiology without the use of conventional electrodes. PMID:24952910

  11. Experimental and theoretical investigation of semiconductor optical amplifier (SOA)-based all-optical wavelength converters

    NASA Astrophysics Data System (ADS)

    Dailey, James M.

    Use of fiber-optical networks has increased along with the growing demand for higher data throughputs. As data bandwidths increase, physical switching technologies must also scale accordingly. Optical-electrical-optical (OEO) switching technologies are widely utilized, where incoming optical signals are converted into and processed as electrical signals before conversion back into the optical domain. However, issues such as speed, cost, and power consumption have driven interest in the development of all-optical techniques, where data remains in the optical domain while being processed. Semiconductor optical amplifiers (SOAs) have shown great promise for realizing all-optical technologies. Our work begins with the experimental characterization of SOAs, and we discuss the use of a time-resolved spectroscopy technique. We present a detailed analysis clarifying measurement requirements, though we conclude that this simple technique provides insufficient resolution for characterizing high-speed optical systems. We discuss the measurement theory for spectrograms, which provide high signal-to-noise ratios, excellent temporal resolution, and are sensitive to phase dynamics. We apply the spectrogram measurement to the characterization of an SOA. We develop a system of rate equations for modeling SOA dynamics, beginning with a detailed density matrix analysis providing expressions for gain and chirp without invoking the linewidth-enhancement factor. In accordance with the measurement results, we include a carrier temperature rate calculation in order to capture ultrafast dynamics. The traveling wave partial differential equations are solved so that both forward and reverse propagating signals are accurately modeled, and the results show good agreement with the spectrogram measurement. We identify the free-carrier plasma and the asymmetrical broadening terms in the real and imaginary parts of the refractive index as driving factors in the relatively larger ultrafast response

  12. Large-scale photonic integration for advanced all-optical routing functions

    NASA Astrophysics Data System (ADS)

    Nicholes, Steven C.

    Advanced InP-based photonic integrated circuits are a critical technology to manage the increasing bandwidth demands of next-generation all-optical networks. Integrating many of the discrete functions required in optical networks into a single device provides a reduction in system footprint and optical losses by eliminating the fiber coupling junctions between components. This translates directly into increased system reliability and cost savings. Although many key network components have been realized via InP-based monolithic integration over the years, truly large-scale photonic ICs have only recently emerged in the marketplace. This lag-time has been mostly due to historically low device yields. In all-optical routing applications, large-scale photonic ICs may be able to address two of the key roadblocks associated with scaling modern electronic routers to higher capacities---namely, power and size. If the functions of dynamic wavelength conversion and routing are moved to the optical layer, we can eliminate the need for power-hungry optical-to-electrical (O/E) and electrical-to-optical (E/O) data conversions at each router node. Additionally, large-scale photonic ICs could reduce the footprint of such a system by combining the similar functions of each port onto a single chip. However, robust design and manufacturing techniques that will enable high-yield production of these chips must be developed. In this work, we demonstrate a monolithic tunable optical router (MOTOR) chip consisting of an array of eight 40-Gbps wavelength converters and a passive arrayed-waveguide grating router that functions as the packet-forwarding switch fabric of an all-optical router. The device represents one of the most complex InP photonic ICs ever reported, with more than 200 integrated functional elements in a single chip. Single-channel 40 Gbps wavelength conversion and channel switching using 231-1 PRBS data showed a power penalty as low as 4.5 dB with less than 2 W drive power

  13. Interaction-free all-optical switching via the quantum Zeno effect

    NASA Astrophysics Data System (ADS)

    Huang, Yu-Ping; Altepeter, Joseph B.; Kumar, Prem

    2010-12-01

    We propose an interaction-free scheme for all-optical switching which does not rely on the physical coupling between signal and control waves. The interaction-free nature of the scheme allows it to overcome the fundamental photon-loss limit imposed by the signal-pump coupling. The same phenomenon protects photonic-signal states from decoherence, making devices based on this scheme suitable for quantum applications. Focusing on χ(2) waveguides, we provide device designs for traveling-wave and Fabry-Perot switches. In both designs, the performance is optimal when the signal switching is induced by coherent dynamical evolution. In contrast, when the switching is induced by a rapid dissipation channel, it is less efficient.

  14. All-Optical Sensing of the Components of the Internal Local Electric Field in Proteins

    PubMed Central

    Drobizhev, M.; Scott, J. N.; Callis, P. R.; Rebane, A.

    2014-01-01

    Here, we present a new all-optical method of interrogation of the internal electric field vector inside proteins. The method is based on experimental evaluation of the permanent dipole moment change upon excitation and the pure electronic transition frequency of a fluorophore embedded in a protein matrix. The permanent dipole moment change can be obtained from two-photon absorption measurements. In addition, permanent dipole moment change, tensor of polarizability change, and transition frequency for the free chromophore should be calculated quantum–mechanically. This allows obtaining the components of the electric field by considering the second-order Stark shift. We use the fluorescent protein mCherry as an example to demonstrate the applicability of the method. PMID:25419440

  15. All-Optical Sensing of the Components of the Internal Local Electric Field in Proteins.

    PubMed

    Drobizhev, M; Scott, J N; Callis, P R; Rebane, A

    2012-10-01

    Here, we present a new all-optical method of interrogation of the internal electric field vector inside proteins. The method is based on experimental evaluation of the permanent dipole moment change upon excitation and the pure electronic transition frequency of a fluorophore embedded in a protein matrix. The permanent dipole moment change can be obtained from two-photon absorption measurements. In addition, permanent dipole moment change, tensor of polarizability change, and transition frequency for the free chromophore should be calculated quantum-mechanically. This allows obtaining the components of the electric field by considering the second-order Stark shift. We use the fluorescent protein mCherry as an example to demonstrate the applicability of the method. PMID:25419440

  16. All-optical cascaded laser wakefield accelerator using ionization-induced injection.

    PubMed

    Liu, J S; Xia, C Q; Wang, W T; Lu, H Y; Wang, Ch; Deng, A H; Li, W T; Zhang, H; Liang, X Y; Leng, Y X; Lu, X M; Wang, C; Wang, J Z; Nakajima, K; Li, R X; Xu, Z Z

    2011-07-15

    We report on near-GeV electron beam generation from an all-optical cascaded laser wakefield accelerator (LWFA). Electron injection and acceleration are successfully separated and controlled in different LWFA stages by employing two gas cells filled with a He/O2 mixture and pure He gas, respectively. Electrons with a Maxwellian spectrum, generated from the first LWFA assisted by ionization-induced injection, were seeded into the second LWFA with a 3-mm-thick gas cell and accelerated to be a 0.8-GeV quasimonoenergetic electron beam, corresponding to an acceleration gradient of 187  GV/m. The demonstrated scheme paves the way towards the multi-GeV laser accelerators. PMID:21838367

  17. Noncontact broadband all-optical photoacoustic microscopy based on a low-coherence interferometer

    NASA Astrophysics Data System (ADS)

    Chen, Zhongjiang; Yang, Sihua; Wang, Yi; Xing, Da

    2015-01-01

    We developed and fabricated a noncontact broadband all-optical photoacoustic microscopy (BD-AO-PAM) with a microchip laser and an all-fiber low coherence interferometer. Currently, the available detection bandwidth of the BD-AO-PAM is 67 MHz, and the lateral resolution measured by carbon fibers reaches 11 μm. Furthermore, the imaging capability of the BD-AO-PAM was testified by imaging hairs embedded in scattering gel and in vivo blood vessels of a mouse ear. The experimental results demonstrate that the BD-AO-PAM can image the tissues with high spatial resolution in vivo, which can be used as portable noncontact PAM for biomedical applications.

  18. All-optical measurement of elastic constants in nematic liquid crystals.

    PubMed

    Klus, Bartłomiej; Laudyn, Urszula A; Karpierz, Mirosław A; Sahraoui, Bouchta

    2014-12-01

    In this article we present a new all-optical method to measure elastic constants connected with twist and bend deformations. The method is based on the optical Freedericksz threshold effect induced by the linearly polarized electro-magnetic wave. In the experiment elastic constants are measured of commonly used liquid crystals 6CHBT and E7 and two new nematic mixtures with low birefringence. The proposed method is neither very sensitive on the variation of cell thickness, beam waist or the power of a light beam nor does it need any special design of a liquid crystal cell. The experimental results are in good agreement with the values obtain by other methods based on an electro-optical effect. PMID:25606956

  19. All-optical cooling of K39 to Bose-Einstein condensation

    NASA Astrophysics Data System (ADS)

    Salomon, G.; Fouché, L.; Lepoutre, S.; Aspect, A.; Bourdel, T.

    2014-09-01

    We report the all-optical production of Bose-Einstein condensates (BEC) of K39 atoms. We directly load 3×107 atoms in a large volume optical dipole trap from gray molasses on the D1 transition. We then apply a small magnetic quadrupole field to polarize the sample before transferring the atoms in a tightly confining optical trap. Evaporative cooling is finally performed close to a Feshbach resonance to enhance the scattering length. Our setup allows one to cross the BEC threshold with 3×105 atoms every 7 s. As an illustration of the interest of the tunability of the interactions we study the expansion of Bose-Einstein condensates in the one-dimensional to three-dimensional crossover.

  20. All-optical transistor using a photonic-crystal cavity with an active Raman gain medium

    NASA Astrophysics Data System (ADS)

    Arkhipkin, V. G.; Myslivets, S. A.

    2013-09-01

    We propose a design of an all-optical transistor based on a one-dimensional photonic-crystal cavity doped with a four-level N-type active Raman gain medium. The calculated results show that in a photonic-crystal cavity of this kind transmission and reflection of the probe (Raman) beam are strongly dependent on the optical switching power. Transmission and reflection of the probe beam can be greatly amplified or attenuated. Therefore the optical switching field can serve as a gate field of the transistor to effectively control propagation of the weak probe field. It is shown that the group velocity of the probe pulse can be controlled in the range from subluminal (slow light) to superluminal (fast light).

  1. A new optical neuron device for all-optical neural networks

    NASA Astrophysics Data System (ADS)

    Akiyama, Koji; Takimoto, Akio; Miyauchi, Michihiro; Kuratomi, Yasunori; Asayama, Junko; Ogawa, Hisahito

    1991-12-01

    A new optical neuron device has been developed. The device can perform both summation and thresholding operations in optics, and consists of a PIN a Si:H photoreceptor, aluminum neuron electrodes and a ferroelectric liquid crystal light modulator. The a-Si:H photoreceptor shows characteristics of an ideal quantum efficiency and a good linearity. The optical neuron device exhibits a response time of about 30 microns for incident light power of 9 microW and a contrast ratio of 300:1. Using this neuron device, a lenslet array and a memory mask, an all-optical neural network has been constructed. The network demonstrates an associate memory function on purely optical parallel processing without any help from electric computation.

  2. Tuning all-Optical Analog to Electromagnetically Induced Transparency in nanobeam cavities using nanoelectromechanical system

    PubMed Central

    Shi, Peng; Zhou, Guangya; deng, Jie; Tian, Feng; Chau, Fook Siong

    2015-01-01

    We report the observations of all-optical electromagnetically induced transparency in nanostructures using waveguide side-coupled with photonic crystal nanobeam cavities, which has measured linewidths much narrower than individual resonances. The quality factor of transparency resonance can be 30 times larger than those of measured individual resonances. When the gap between cavity and waveguide is reduced to 10 nm, the bandwidth of destructive interference region can reach 10 nm while the width of transparency resonance is 0.3 nm. Subsequently, a comb-drive actuator is introduced to tune the line shape of the transparency resonance. The width of the peak is reduced to 15 pm and the resulting quality factor exceeds 105. PMID:26415907

  3. High efficiency all-optical diode based on photonic crystal waveguide

    NASA Astrophysics Data System (ADS)

    Liu, Bin; Liu, Yun-Feng; Li, Shu-Jing; He, Xing-Dao

    2016-06-01

    A high efficiency all-optical diode based on photonic crystal (PC) waveguide has been proposed and numerically investigated by finite-difference time-domain (FDTD) method. The structure is asymmetrically coupled by a Fano cavity containing nonlinear Kerr medium and a F-P cavity in PC waveguide. Because of interference between two cavities, Fano peak and F-P peak can both appear in transmission spectra. Working wavelength is set between the two peaks and approaching to Fano peak. For forward launch with suitable light intensity, nonlinear Kerr effect of micro-cavity can be excited. It would result in red shift of Fano peak and achieving forward transmission. But due to the asymmetric design, backward launch need stronger incidence light to excite Kerr effect. This design has many advantages, including high maximum transmittance (>90%), high transmittance contrast ratio, low power threshold, short response time (picosecond level), ease of integration.

  4. Architectures and algorithms for all-optical 3D signal processing

    NASA Astrophysics Data System (ADS)

    Giglmayr, Josef

    1999-07-01

    All-optical signal processing by >= 2D lightwave circuits (LCs) is (i) aimed to allow the (later) inclusion of the frequency domain and is (ii) subject to photonic integration and thus the architectural and algorithmic framework has to be prepared carefully. Much work has been done in >= 2D algebraic system theory/modern control theory which has been applied in the electronic field of signal and image processing. For the application to modeling, analysis and design of the proposed 3D lightwave circuits (LCs) some elements are needed to describe and evalute the system efficiency as the number of system states of 3D LCs increases dramatically with regard to the number of i/o. Several problems, arising throughput such an attempt, are made transparent and solutions are proposed.

  5. Deterministic character of all-optical magnetization switching in GdFe-based ferrimagnetic alloys

    NASA Astrophysics Data System (ADS)

    Le Guyader, L.; El Moussaoui, S.; Buzzi, M.; Savoini, M.; Tsukamoto, A.; Itoh, A.; Kirilyuk, A.; Rasing, Th.; Nolting, F.; Kimel, A. V.

    2016-04-01

    Using photoemission electron microscopy with x-ray magnetic circular dichroism as a contrast mechanism, new insights into the all-optical magnetization switching (AOS) phenomenon in GdFe-based rare-earth transition-metal ferrimagnetic alloys are provided. From a sequence of static images taken after single linearly polarized laser pulse excitation, the repeatability of AOS can be quantified with a correlation coefficient. It is found that low coercivity enables thermally activated domain-wall motion, limiting in turn the repeatability of the switching. Time-resolved measurements of the magnetization dynamics reveal that while AOS occurs below and above the magnetization compensation temperature TM, it is not observed in GdFe samples where TM is absent. Finally, AOS is experimentally demonstrated against an applied magnetic field of up to 180 mT.

  6. Broadband all-optical modulation in hydrogenated-amorphous silicon waveguides.

    PubMed

    Narayanan, Karthik; Elshaari, Ali W; Preble, Stefan F

    2010-05-10

    We demonstrate broadband all-optical modulation in low loss hydrogenated-amorphous silicon (a-Si:H) waveguides. Significant modulation (approximately 3 dB) occurs with a device of only 15 microm without the need for cavity interference effects in stark contrast to an identical crystalline silicon waveguide. We attribute the enhanced modulation to the significantly larger free-carrier absorption effect of a-Si:H, estimated here to be alpha = 1.6310(-16)N cm(-1). In addition, we measured the modulation time to be only tau(c) approximately 400 ps, which is comparable to the recombination rate measured in sub-micron crystalline silicon waveguides, illustrating the strong dominance of surface recombination in similar sized (460 nm x 250 nm) a-Si:H waveguides. Consequently, a-Si:H could serve as a high performance platform for backend integrated CMOS photonics. PMID:20588830

  7. All-optical 2-bit header recognition and packet switching using polarization bistable VCSELs.

    PubMed

    Hayashi, Daisuke; Nakao, Kazuya; Katayama, Takeo; Kawaguchi, Hitoshi

    2015-04-01

    We propose and evaluate an all-optical 2-bit header recognition and packet switching method using two 1.55-µm polarization bistable vertical-cavity surface-emitting lasers (VCSELs) and three optical switches. Polarization bistable VCSELs acted as flip-flop devices by using AND-gate operations of the header and set pulses, together with the reset pulses. Optical packets including 40-Gb/s non-return-to-zero pseudo-random bit-sequence payloads were successfully sent to one of four ports according to the state of two bits in the headers with a 4-bit 500-Mb/s return-to-zero format. The input pulse powers were 17.2 to 31.8 dB lower than the VCSEL output power. We also examined an extension of this method to multi-bit header recognition and packet switching. PMID:25968674

  8. Remoted all optical instantaneous frequency measurement system using nonlinear mixing in highly nonlinear optical fiber.

    PubMed

    Bui, Lam Anh; Mitchell, Arnan

    2013-04-01

    A novel remoted instantaneous frequency measurement system using all optical mixing is demonstrated. This system copies an input intensity modulated optical carrier using four wave mixing, delays this copy and then mixes it with the original signal, to produce an output idler tone. The intensity of this output can be used to determine the RF frequency of the input signal. This system is inherently broadband and can be easily scaled beyond 40 GHz while maintaining a DC output which greatly simplifies receiving electronics. The remoted configuration isolates the sensitive and expensive receiver hardware from the signal sources and importantly allows the system to be added to existing microwave photonic implementations without modification of the transmission module. PMID:23571944

  9. Nanoscale Confinement of All-Optical Magnetic Switching in TbFeCo

    NASA Astrophysics Data System (ADS)

    Liu, Tianmin; Wang, Tianhan; Reid, Alexander; Savoini, Matteo; Wu, Xiaofei; Konene, Benny; Granitzka, Patrick; Graves, Catherine; Higley, Daniel; Chen, Zhao; Razinskas, Gary; Hantschmann, Markus; Scherz, Andreas; Stohr, Joachim; Tsukamoto, Arata; Hecht, Bert; Kimel, Alexey; Kirilyuk, Andrei; Rasing, Theo; Durr, Hermann; Durr/Stohr Team; Theo Rasing Team; Arata Tsukamoto Team; Bert Hecht Team

    Gold two-wire antennas structures are placed upon the surface of the all-optical switching film TbFeCo. They resonate with the optical field and create a field enhancement in its vicinity, which is used to confine the area where optical switching can occur. It is demonstrated that single femtosecond optical laser pulses can reverse magnetization in a controllable fashion by such confinement. The magnetic states are imaged using resonant X-ray holography and magnetic circular dichroism. The results not only show the feasibility of controllable switching with antenna assistance but also demonstrate the highly inhomogeneous nature of the switching process, which is attributed to the material's heterogeneity. Research is supported by U.S. DOE, Office of Basic Energy Sciences, Materials Sciences and Engineering Division.

  10. Numerical simulation for all-optical Thomson scattering X-ray source

    NASA Astrophysics Data System (ADS)

    Tan, Fang; Zhu, Bin; Han, Dan; Xin, Jian-Ting; Zhao, Zong-Qing; Cao, Lei-Feng; Gu, Yu-Qiu; Zhang, Bao-Han

    2014-03-01

    Energy spectra, angular distributions, and temporal profiles of the photons produced by an all-optical Thomson scattering X-ray source are explored through numerical simulations based on the parameters of the SILEX-I laser system (800 nm, 30 fs, 300 TW) and the previous wakefield acceleration experimental results. The simulation results show that X-ray pulses with a duration of 30 fs and an emission angle of 50 mrad can be produced from such a source. Using the optimized electron parameters, X-ray pulses with better directivity and narrower energy spectra can be obtained. Besides the electron parameters, the laser parameters such as the wavelength, pulse duration, and spot size also affect the X-ray yield, the angular distribution, and the maximum photon energy, except the X-ray pulse duration which is slightly changed for the case of ultrafast laser—electron interaction.

  11. Ultralow-power all-optical tunable double plasmon-induced transparencies in nonlinear metamaterials

    SciTech Connect

    Zhu, Yu; Yang, Hong; Hu, Xiaoyong E-mail: qhgong@pku.edu.cn; Gong, Qihuang E-mail: qhgong@pku.edu.cn

    2014-05-26

    An all-optical tunable double plasmon-induced transparency is realized in a photonic metamaterial coated on the surface of a nanocomposite layer made of polycrystalline indium-tin oxide doped with gold nanoparticles. The local-field effect, quantum confinement effect, and hot-electron injection ensure a large optical nonlinearity for the nanocomposite. A shift of 120 nm in the central wavelength of transparency windows is reached under excitation with a weak pump laser with an intensity of 21 kW/cm{sup 2}. Compared with previous reports, the threshold pump intensity is reduced by five orders of magnitude, while an ultrafast response time of 34.9 ps is maintained.

  12. Banded all-optical OFDM super-channels with low-bandwidth receivers.

    PubMed

    Song, Binhuang; Zhu, Chen; Corcoran, Bill; Zhuang, Leimeng; Lowery, Arthur James

    2016-08-01

    We propose a banded all-optical orthogonal frequency division multiplexing (AO-OFDM) transmission system based on synthesising a number of truncated sinc-shaped subcarriers for each sub-band. This approach enables sub-band by sub-band reception and therefore each receiver's electrical bandwidth can be significantly reduced compared with a conventional AO-OFDM system. As a proof-of-concept experiment, we synthesise 6 × 10-Gbaud subcarriers in both conventional and banded AO-OFDM systems. With a limited receiver electrical bandwidth, the experimental banded AO-OFDM system shows 2-dB optical signal to noise ratio (OSNR) benefit over conventional AO-OFDM at the 7%-overhead forward error correction (FEC) threshold. After transmission over 800-km of single-mode fiber, ≈3-dB improvement in Q-factor can be achieved at the optimal launch power at a cost of increasing the spectral width by 14%. PMID:27505764

  13. All optical switching in a photochromic dye-doped biopolymeric matrix

    NASA Astrophysics Data System (ADS)

    Mysliwiec, Jaroslaw; Malak, Anna; Sikora, Joanna; Miniewicz, Andrzej; Sahraoui, Bouchta; Rau, Ileana; Kajzar, François

    2011-09-01

    All optical switching has been studied using the Optical Kerr Effect (OKE) configuration in a biopolymer matrix containing a photochromic molecule. The biopolymer system consisted of a deoxyribonucleic acid blended with cationic surfactant molecule cetyltrimethyl-ammonium chloride suitable for optical quality thin film fabrication. The excitation beams inducing birefringence were delivered from a continuous wave laser at 473 and chopped using a variable frequency chopper. Additionally auxiliary nanosecond pulses coming from Nd:YAG laser were used. The birefringence was instantaneously monitored by a weak non-absorbed light from a cw He-Ne laser working at 632.8 nm under crossed polarizer system. Excellent switching times in the range of microseconds and full reversibility of the studied processes have been observed.ïýïýïý

  14. All-optical quantization scheme by slicing the supercontinuum in a chalcogenide horizontal slot waveguide

    NASA Astrophysics Data System (ADS)

    Kang, Shuai; Yuan, Jinhui; Kang, Zhe; Zhang, Xianting; Kang, Xue; Guo, Zheng; Li, Feng; Yan, Binbin; Wang, Kuiru; Sang, Xinzhu; Yu, Chongxiu

    2015-08-01

    In this paper, we propose an integratable spectral quantization scheme for all-optical analog-to-digital conversion (AOADC) by slicing the supercontinuum, which is generated in a chalcogenide (As2S3) horizontal slot waveguide. The numerical simulation results show that a 4-bit quantization resolution is successfully achieved along with a signal-to-noise ratio of 23.96 dB and an effective number of bit (ENOB) of 3.98 bit. The required As2S3 waveguide length and input peak power are only 1.5 cm and 900 mW, respectively, owing to the high nonlinear coefficient of 115.8 W-1/m. It is believed that this proposed scheme can find important applications in the photonic integratable AOADC with low power consumption.

  15. All-optical analog-to-digital conversion scheme based on Sagnac loop and balanced receivers.

    PubMed

    Xu, Kun; Niu, Jian; Dai, Yitang; Sun, Xiaoqiang; Dai, Jian; Wu, Jian; Lin, Jintong

    2011-05-10

    An all-optical analog-to-digital conversion scheme based on a Sagnac loop and balanced receivers is proposed and experimentally demonstrated. Adjustable phase shift about the transfer function of the Sagnac loop is obtained by using the multiwavelength optical pulses to realize the phase-shift optical quantization. Benefit from the complementary outputs at the transmitted and reflected ports of the Sagnac loop and balanced receiver can be used to obtain the quantized output binary signal for the encoding operation. A proof-of-concept experiment is implemented using a wavelength tunable continuous-wave laser diode. Using 16 different wavelengths, the 16 quantization levels are demonstrated and an effective number of bits (ENOB) of 4 bits is obtained. PMID:21556099

  16. Nanoscale sub-100 picosecond all-optical magnetization switching in GdFeCo microstructures.

    PubMed

    Le Guyader, L; Savoini, M; El Moussaoui, S; Buzzi, M; Tsukamoto, A; Itoh, A; Kirilyuk, A; Rasing, T; Kimel, A V; Nolting, F

    2015-01-01

    Ultrafast magnetization reversal driven by femtosecond laser pulses has been shown to be a promising way to write information. Seeking to improve the recording density has raised intriguing fundamental questions about the feasibility of combining ultrafast temporal resolution with sub-wavelength spatial resolution for magnetic recording. Here we report on the experimental demonstration of nanoscale sub-100 ps all-optical magnetization switching, providing a path to sub-wavelength magnetic recording. Using computational methods, we reveal the feasibility of nanoscale magnetic switching even for an unfocused laser pulse. This effect is achieved by structuring the sample such that the laser pulse, via both refraction and interference, focuses onto a localized region of the structure, the position of which can be controlled by the structural design. Time-resolved photo-emission electron microscopy studies reveal that nanoscale magnetic switching employing such focusing can be pushed to the sub-100 ps regime. PMID:25581133

  17. Femtosecond all-optical synchronization of an X-ray free-electron laser

    SciTech Connect

    Schulz, S.; Grguraš, I.; Behrens, C.; Bromberger, H.; Costello, J. T.; Czwalinna, M. K.; Felber, M.; Hoffmann, M. C.; Ilchen, M.; Liu, H. Y.; Mazza, T.; Meyer, M.; Pfeiffer, S.; Prędki, P.; Schefer, S.; Schmidt, C.; Wegner, U.; Schlarb, H.; Cavalieri, A. L.

    2015-01-20

    Many advanced applications of X-ray free-electron lasers require pulse durations and time resolutions of only a few femtoseconds. To generate these pulses and to apply them in time-resolved experiments, synchronization techniques that can simultaneously lock all independent components, including all accelerator modules and all external optical lasers, to better than the delivered free-electron laser pulse duration, are needed. Here we achieve all-optical synchronization at the soft X-ray free-electron laser FLASH and demonstrate facility-wide timing to better than 30 fs r.m.s. for 90 fs X-ray photon pulses. Crucially, our analysis indicates that the performance of this optical synchronization is limited primarily by the free-electron laser pulse duration, and should naturally scale to the sub-10 femtosecond level with shorter X-ray pulses.

  18. Femtosecond all-optical synchronization of an X-ray free-electron laser

    DOE PAGESBeta

    Schulz, S.; Grguraš, I.; Behrens, C.; Bromberger, H.; Costello, J. T.; Czwalinna, M. K.; Felber, M.; Hoffmann, M. C.; Ilchen, M.; Liu, H. Y.; et al

    2015-01-20

    Many advanced applications of X-ray free-electron lasers require pulse durations and time resolutions of only a few femtoseconds. To generate these pulses and to apply them in time-resolved experiments, synchronization techniques that can simultaneously lock all independent components, including all accelerator modules and all external optical lasers, to better than the delivered free-electron laser pulse duration, are needed. Here we achieve all-optical synchronization at the soft X-ray free-electron laser FLASH and demonstrate facility-wide timing to better than 30 fs r.m.s. for 90 fs X-ray photon pulses. Crucially, our analysis indicates that the performance of this optical synchronization is limited primarilymore » by the free-electron laser pulse duration, and should naturally scale to the sub-10 femtosecond level with shorter X-ray pulses.« less

  19. All-optical tunable microwave interference suppression filter based on SOA

    NASA Astrophysics Data System (ADS)

    Xu, Enming; Zhang, Xinliang; Zhou, Lina; Huang, Dexiu

    2008-12-01

    An all-optical filter structure for interference suppression of microwave signals is presented. The filter is based on a recirculating delay line (RDL) loop consisting of a semiconductor optical amplifier (SOA) followed by a tunable narrowband optical filter, and a fiber Bragg grating connected after the RDL loop. Negative tap is generated in wavelength conversion process based on cross-gain modulation of amplified spontaneous emission spectrum of the SOA. A narrow passband filter with negative coefficients and a broadband all-pass filter are synthesized to achieve a narrow notch filter with flat passband which can excise interference with minimal impact on the wanted signal over a wide microwave range. Experimental results show that measured and theoretical frequency responses agree well and the filter is tunable.

  20. Simple nonlinear interferometer-based all-optical thresholder and its applications for optical CDMA.

    PubMed

    Kravtsov, Konstantin; Prucnal, Paul R; Bubnov, Mikhail M

    2007-10-01

    We present an experimental demonstration of an ultrafast all-optical thresholder based on a nonlinear Sagnac interferometer. The proposed design is intended for operation at very small nonlinear phase shifts. Therefore, it requires an in-loop nonlinearity lower than for the classical nonlinear loop mirror scheme. Only 15 meters of conventional (non-holey) silica-based fiber is used as a nonlinear element. The proposed thresholder is polarization insensitive and is good for multi-wavelength operation, meeting all the requirements for autocorrelation detection in various optical CDMA communication systems. The observed cubic transfer function is superior to the quadratic transfer function of second harmonic generation-based thresholders. PMID:19550579

  1. Study of the all-optical high-speed OFDM transmission system based on MAMSK modulation

    NASA Astrophysics Data System (ADS)

    Shang, Tao; Sun, Jinkui; Li, Yang; Wang, Xin

    2012-12-01

    In this paper, an all-optical orthogonal frequency division multiplexing (OOFDM) system based on the multi-amplitude minimum shift keying (MAMSK) modulation is proposed. A scheme to realize MAMSK is designed, and the influence of modulation index on the performance of MAMSK is discussed. Numerical simulations and analysis are performed, and the comparison between the MAMSK-OOFDM and the MAMSK-WDM system is made. The lowest value of the BER of MAMSK-OOFDM is 3.98 × 10-6, while that of MAMSK-WDM is 7.94 × 10-4 when the input power is 0.8 mw and dispersion is completely compensated. The results show that, for its multi-level amplitude and excellent spectrum efficiency, MAMSK-OOFDM can greatly mitigate the effects caused by dispersive and nonlinear phenomena, and it can also effectively improve the capacity of the system.

  2. Multiport InP monolithically integrated all-optical wavelength router.

    PubMed

    Zheng, Xiu; Raz, Oded; Calabretta, Nicola; Zhao, Dan; Lu, Rongguo; Liu, Yong

    2016-08-15

    An indium phosphide-based monolithically integrated wavelength router is demonstrated in this Letter. The wavelength router has four input ports and four output ports, which integrate four wavelength converters and a 4×4 arrayed-waveguide grating router. Each wavelength converter is achieved based on cross-gain modulation and cross-phase modulation effects in a semiconductor optical amplifier. Error-free wavelength switching for a non-return-to-zero 231-1 ps eudorandom binary sequence at 40 Gb/s data rate is performed. Both 1×4 and 3×1 all-optical routing functions of this chip are demonstrated for the first time with power penalties as low as 3.2 dB. PMID:27519116

  3. All-optical 20 Gbit/s NRZ-DPSK demodulation and clock recovery

    NASA Astrophysics Data System (ADS)

    Wang, Fei; Zhang, Xinliang; Dong, Jianji; Yu, Yu; Huang, Xi

    2008-11-01

    All-optical clock recovery (CR) from 20-Gbit/s nonreturn-to-zero differential phase-shift-keying (NRZ-DPSK) signal is demonstrated experimentally by using Polarization-Maintaining Fiber Loop Mirror Filter and semiconductor optical amplifier (SOA) fiber ring laser. Only by adjusting polarization controller (PC), NRZ-DPSK signal were conveniently and fast converted to pseudo return-to-zero (PRZ) signal via PMF-LMF. Then the PRZ signal is injected into the SOA fiber laser for CR. The recovered clock signals with the extinction ratio of 10 dB and the root-mean-square timing jitter of 850 fs is achieved under 231-1 pseudorandom binary sequence NRZ-DPSK signals measurement.

  4. All-optical code-division multiple-access applications: 2(n) extended-prime codes.

    PubMed

    Zhang, J G; Kwong, W C; Mann, S

    1997-09-10

    A new family of 2(n) codes, called 2(n) extended-prime codes, is proposed for all-optical code-division multiple-access networks. Such 2(n) codes are derived from so-called extended-prime codes so that their cross-correlation functions are not greater than 1, as opposed to 2 for recently proposed 2(n) prime codes. As a result, a larger number of active users can now be supported by the new codes for a given bit-error rate than can be by 2(n) prime codes, while power-efficient, waveguide-integrable all-serial coding and correlating configurations proposed for the 2(n) prime codes can still be employed. PMID:18259529

  5. All optical mode controllable Er-doped random fiber laser with distributed Bragg gratings.

    PubMed

    Zhang, W L; Ma, R; Tang, C H; Rao, Y J; Zeng, X P; Yang, Z J; Wang, Z N; Gong, Y; Wang, Y S

    2015-07-01

    An all-optical method to control the lasing modes of Er-doped random fiber lasers (RFLs) is proposed and demonstrated. In the RFL, an Er-doped fiber (EDF) recoded with randomly separated fiber Bragg gratings (FBG) is used as the gain medium and randomly distributed reflectors, as well as the controllable element. By combining random feedback of the FBG array and Fresnel feedback of a cleaved fiber end, multi-mode coherent random lasing is obtained with a threshold of 14 mW and power efficiency of 14.4%. Moreover, a laterally-injected control light is used to induce local gain perturbation, providing additional gain for certain random resonance modes. As a result, active mode selection of the RFL is realized by changing locations of the laser cavity that is exposed to the control light. PMID:26125397

  6. A novel noninvasive all optical technique to monitor physiology of an exercising muscle

    NASA Astrophysics Data System (ADS)

    Saxena, Vishal; Marcu, Laura; Karunasiri, Gamani

    2008-11-01

    An all optical technique based on near-infrared spectroscopy and mid-infrared imaging (MIRI) is applied as a noninvasive, in vivo tool to monitor the vascular status of skeletal muscle and the physiological changes that occur during exercise. A near-infrared spectroscopy (NIRS) technique, namely, steady state diffuse optical spectroscopy (SSDOS) along with MIRI is applied for monitoring the changes in the values of tissue oxygenation and thermometry of an exercising muscle. The NIRS measurements are performed at five discrete wavelengths in a spectral window of 650-850 nm and MIRI is performed in a spectral window of 8-12 µm. The understanding of tissue oxygenation status and the behavior of the physiological parameters derived from thermometry may provide a useful insight into muscle physiology, therapeutic response and treatment.

  7. New approach to fault-tolerant routing in all-optical networks

    NASA Astrophysics Data System (ADS)

    Sengupta, Abhijit; Alluri, Shailesh; Bandyopadhyay, Subir; Jaekel, Arunita

    1999-08-01

    Fault management in WDM routed all-optical networks has mostly been addressed either by automatic protection switching or through loop-back recovery. These schemes are designed for managing single fault occurrence and generalization method to handle multiple faults are not known. Conventional routing schemes are static in nature (where the routers are programmed to realize the lightpaths between the end-nodes) and hence a fault management scheme needs to find a fault-free path between end-nodes using the settings of the routers. This paper considers the principle of survival route graphs to construct fault-free paths between end-nodes. As a result, the fault avoiding route between two end-nodes might be a multihop route in which the number of hops are limited to reduce the communication delay. The performance degradations of the network because of fault occurrence are studied through simulations and measured in terms of blocking probability and communication delay.

  8. All-Optical Generation and Switching of Few-Cycle Millimeter-Wave Pulses

    NASA Astrophysics Data System (ADS)

    Lin, Jim-Wein; Wun, Jhih-Min; Shi, Jin-Wei; Pan, Ci-Ling

    2014-10-01

    We conducted a comparative study of two schemes of photonic generation and switching of few-cycle sub-THz or millimeter wave (MMW) pulses by use of a photonic-transmitter-mixer (PTM) module with a broadband and high-power near-ballistic uni-traveling carrier photodiode (NBUTC-PD). In the first scheme, we performed all-optical ultra-fast switching (bias modulation) of the PTM injected with a 93 GHz optical local-oscillator signal. Sub-2-cycle short MMW pulses with central frequency at 93 GHz were generated. To compare, in scheme 2, we employed femtosecond optical short pulses to directly excite the PTM under a DC bias (optical modulation). The former approach is shown to be capable of providing much less signal distortion and much shorter pulse duration than the latter.

  9. All-Optical Frequency Modulated High Pressure MEMS Sensor for Remote and Distributed Sensing

    PubMed Central

    Reck, Kasper; Thomsen, Erik V.; Hansen, Ole

    2011-01-01

    We present the design, fabrication and characterization of a new all-optical frequency modulated pressure sensor. Using the tangential strain in a circular membrane, a waveguide with an integrated nanoscale Bragg grating is strained longitudinally proportional to the applied pressure causing a shift in the Bragg wavelength. The simple and robust design combined with the small chip area of 1 × 1.8 mm2 makes the sensor ideally suited for remote and distributed sensing in harsh environments and where miniaturized sensors are required. The sensor is designed for high pressure applications up to 350 bar and with a sensitivity of 4.8 pm/bar (i.e., 350 ×105 Pa and 4.8 × 10−5 pm/Pa, respectively). PMID:22346662

  10. Femtosecond all-optical synchronization of an X-ray free-electron laser

    PubMed Central

    Schulz, S.; Grguraš, I.; Behrens, C.; Bromberger, H.; Costello, J. T.; Czwalinna, M. K.; Felber, M.; Hoffmann, M. C.; Ilchen, M.; Liu, H. Y.; Mazza, T.; Meyer, M.; Pfeiffer, S.; Prędki, P.; Schefer, S.; Schmidt, C.; Wegner, U.; Schlarb, H.; Cavalieri, A. L.

    2015-01-01

    Many advanced applications of X-ray free-electron lasers require pulse durations and time resolutions of only a few femtoseconds. To generate these pulses and to apply them in time-resolved experiments, synchronization techniques that can simultaneously lock all independent components, including all accelerator modules and all external optical lasers, to better than the delivered free-electron laser pulse duration, are needed. Here we achieve all-optical synchronization at the soft X-ray free-electron laser FLASH and demonstrate facility-wide timing to better than 30 fs r.m.s. for 90 fs X-ray photon pulses. Crucially, our analysis indicates that the performance of this optical synchronization is limited primarily by the free-electron laser pulse duration, and should naturally scale to the sub-10 femtosecond level with shorter X-ray pulses. PMID:25600823

  11. Femtosecond all-optical synchronization of an X-ray free-electron laser

    NASA Astrophysics Data System (ADS)

    Schulz, S.; Grguraš, I.; Behrens, C.; Bromberger, H.; Costello, J. T.; Czwalinna, M. K.; Felber, M.; Hoffmann, M. C.; Ilchen, M.; Liu, H. Y.; Mazza, T.; Meyer, M.; Pfeiffer, S.; Prędki, P.; Schefer, S.; Schmidt, C.; Wegner, U.; Schlarb, H.; Cavalieri, A. L.

    2015-01-01

    Many advanced applications of X-ray free-electron lasers require pulse durations and time resolutions of only a few femtoseconds. To generate these pulses and to apply them in time-resolved experiments, synchronization techniques that can simultaneously lock all independent components, including all accelerator modules and all external optical lasers, to better than the delivered free-electron laser pulse duration, are needed. Here we achieve all-optical synchronization at the soft X-ray free-electron laser FLASH and demonstrate facility-wide timing to better than 30 fs r.m.s. for 90 fs X-ray photon pulses. Crucially, our analysis indicates that the performance of this optical synchronization is limited primarily by the free-electron laser pulse duration, and should naturally scale to the sub-10 femtosecond level with shorter X-ray pulses.

  12. Femtosecond all-optical synchronization of an X-ray free-electron laser.

    PubMed

    Schulz, S; Grguraš, I; Behrens, C; Bromberger, H; Costello, J T; Czwalinna, M K; Felber, M; Hoffmann, M C; Ilchen, M; Liu, H Y; Mazza, T; Meyer, M; Pfeiffer, S; Prędki, P; Schefer, S; Schmidt, C; Wegner, U; Schlarb, H; Cavalieri, A L

    2015-01-01

    Many advanced applications of X-ray free-electron lasers require pulse durations and time resolutions of only a few femtoseconds. To generate these pulses and to apply them in time-resolved experiments, synchronization techniques that can simultaneously lock all independent components, including all accelerator modules and all external optical lasers, to better than the delivered free-electron laser pulse duration, are needed. Here we achieve all-optical synchronization at the soft X-ray free-electron laser FLASH and demonstrate facility-wide timing to better than 30 fs r.m.s. for 90 fs X-ray photon pulses. Crucially, our analysis indicates that the performance of this optical synchronization is limited primarily by the free-electron laser pulse duration, and should naturally scale to the sub-10 femtosecond level with shorter X-ray pulses. PMID:25600823

  13. Sequentially timed all-optical mapping photography (STAMP) utilizing spectral filtering.

    PubMed

    Suzuki, Takakazu; Isa, Fumihiro; Fujii, Leo; Hirosawa, Kenichi; Nakagawa, Keiichi; Goda, Keisuke; Sakuma, Ichiro; Kannari, Fumihiko

    2015-11-16

    We propose and experimentally demonstrate a new method called SF-STAMP for sequentially timed all-optical mapping photography (STAMP) that utilizes spectral filtering. SF-STAMP is composed of a diffractive optical element (DOE), a band-pass filter, and two Fourier transform lenses. Using a linearly frequency-chirped pulse and converting the wavelength to the time axis, we realize single-shot ultrafast burst imaging. As an experimental demonstration of SF-STAMP, we monitor the dynamics of a laser ablation using a linearly frequency-chirped broadband pulse (>100 nm) that is temporally stretched up to ~40 ps. This imaging method is expected to be effective for investigating ultrafast dynamics in a diverse range of fields, such as photochemistry, plasma physics, and fluidics. PMID:26698529

  14. All-optical probing of the nonlinear acoustics of a crack.

    PubMed

    Mezil, Sylvain; Chigarev, Nikolay; Tournat, Vincent; Gusev, Vitalyi

    2011-09-01

    Experiments with an all-optical method for the study of the nonlinear acoustics of cracks in solids are reported. Nonlinear acoustic waves are initiated by the absorption of radiation from a pair of laser beams intensity modulated at two different frequencies. The detection of acoustic waves at mixed frequencies, absent in the frequency spectrum of the heating lasers, by optical interferometry or deflectometry provides unambiguous evidence of the elastic nonlinearity of the crack. The high contrast in crack imaging achieved by remote optical monitoring of the nonlinear acoustic processes is due to the strong dependence of the efficiency of optoacoustic conversion on the state of the crack. The highest acoustic nonlinearity is observed in the transitional state of the crack, which is intermediate between the open and the closed ones. PMID:21886240

  15. All-Optical Micro Motors Based on Moving Gratings in Photosensitive Media

    NASA Technical Reports Server (NTRS)

    Curley, M.; Sarkisov, S. S.; Fields, A.; Smith, C.; Kukhtarev, N.; Kulishov, M. B.; Adamovsky, G. (Technical Monitor)

    2000-01-01

    An all-optical micro motor with a rotor driven by a traveling wave of surface deformation of a stator being in contact with the rotor is being studied. Instead of an ultrasonic wave produced by an electrically driven piezoelectric actuator as in ultrasonic motors, the wave is a result of a photo induced surface deformation of a photosensitive material produced by a traveling holographic grating. Two phase modulated coherent optical beams generate the grating. Several types of photosensitive materials are studied such as photorefractive crystals, photosensitive piezoelectric ceramics, and side-chain liquid crystalline polyesters. In order to be considered as a possible candidate for micro motors, the material should exhibit surface deformation produced by moving grating of the order of 10 micron. Deformations produced by static holographic gratings are studied in photorefractive crystals of LiNbO3 using high vertical resolution surface profilometer Dektak 3 and surface interferometer WYKO. An experimental set-up with moving grating has been developed. The set-up uses a two-beam interferometry configuration with one beam being reflected by a thin mirror mounted on a loud speaker. A ramp voltage signal generator drives the speaker. Changing voltage, polarity, and frequency of the signal can easily generate vibrating gratings or moving gratings in both directions. A vibrating grating has been applied to a photorefractive crystal of BSO controlled by an external electric field of the order of 104 V/cm. We have additionally studied effects of moving grating interaction with light absorbing fluids such as solutions of 2,9,16,23-Tetrakis(phenylthio)-29H, 31 Hphthalocyanine in chlorobenzene in capillary tubes. The purpose of using a liquid is to show that the moving gratings can force a liquid to shift. The interaction of a single low power focused laser beam at 633 nm with such fluid produced an intensive circular motion, which also might be applied to all-optical micro

  16. All-optical pulse-echo ultrasound probe for intravascular imaging (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Colchester, Richard J.; Noimark, Sacha; Mosse, Charles A.; Zhang, Edward Z.; Beard, Paul C.; Parkin, Ivan P.; Papakonstantinou, Ioannis; Desjardins, Adrien E.

    2016-02-01

    High frequency ultrasound probes such as intravascular ultrasound (IVUS) and intracardiac echocardiography (ICE) catheters can be invaluable for guiding minimally invasive medical procedures in cardiology such as coronary stent placement and ablation. With current-generation ultrasound probes, ultrasound is generated and received electrically. The complexities involved with fabricating these electrical probes can result in high costs that limit their clinical applicability. Additionally, it can be challenging to achieve wide transmission bandwidths and adequate wideband reception sensitivity with small piezoelectric elements. Optical methods for transmitting and receiving ultrasound are emerging as alternatives to their electrical counterparts. They offer several distinguishing advantages, including the potential to generate and detect the broadband ultrasound fields (tens of MHz) required for high resolution imaging. In this study, we developed a miniature, side-looking, pulse-echo ultrasound probe for intravascular imaging, with fibre-optic transmission and reception. The axial resolution was better than 70 microns, and the imaging depth in tissue was greater than 1 cm. Ultrasound transmission was performed by photoacoustic excitation of a carbon nanotube/polydimethylsiloxane composite material; ultrasound reception, with a fibre-optic Fabry-Perot cavity. Ex vivo tissue studies, which included healthy swine tissue and diseased human tissue, demonstrated the strong potential of this technique. To our knowledge, this is the first study to achieve an all-optical pulse-echo ultrasound probe for intravascular imaging. The potential for performing all-optical B-mode imaging (2D and 3D) with virtual arrays of transmit/receive elements, and hybrid imaging with pulse-echo ultrasound and photoacoustic sensing are discussed.

  17. OptoDyCE: Automated system for high-throughput all-optical dynamic cardiac electrophysiology

    NASA Astrophysics Data System (ADS)

    Klimas, Aleksandra; Yu, Jinzhu; Ambrosi, Christina M.; Williams, John C.; Bien, Harold; Entcheva, Emilia

    2016-02-01

    In the last two decades, <30% of drugs withdrawals from the market were due to cardiac toxicity, where unintended interactions with ion channels disrupt the heart's normal electrical function. Consequently, all new drugs must undergo preclinical testing for cardiac liability, adding to an already expensive and lengthy process. Recognition that proarrhythmic effects often result from drug action on multiple ion channels demonstrates a need for integrative and comprehensive measurements. Additionally, patient-specific therapies relying on emerging technologies employing stem-cell derived cardiomyocytes (e.g. induced pluripotent stem-cell-derived cardiomyocytes, iPSC-CMs) require better screening methods to become practical. However, a high-throughput, cost-effective approach for cellular cardiac electrophysiology has not been feasible. Optical techniques for manipulation and recording provide a contactless means of dynamic, high-throughput testing of cells and tissues. Here, we consider the requirements for all-optical electrophysiology for drug testing, and we implement and validate OptoDyCE, a fully automated system for all-optical cardiac electrophysiology. We demonstrate the high-throughput capabilities using multicellular samples in 96-well format by combining optogenetic actuation with simultaneous fast high-resolution optical sensing of voltage or intracellular calcium. The system can also be implemented using iPSC-CMs and other cell-types by delivery of optogenetic drivers, or through the modular use of dedicated light-sensitive somatic cells in conjunction with non-modified cells. OptoDyCE provides a truly modular and dynamic screening system, capable of fully-automated acquisition of high-content information integral for improved discovery and development of new drugs and biologics, as well as providing a means of better understanding of electrical disturbances in the heart.

  18. All-optical photoacoustic microscopy (AOPAM) system for remote characterization of biological tissues

    NASA Astrophysics Data System (ADS)

    Sampathkumar, Ashwin; Chitnis, Parag V.; Silverman, Ronald H.

    2014-03-01

    Conventional photoacoustic microscopy (PAM) employs light pulses to produce a photoacoustic (PA) effect and detects the resulting acoustic waves using an ultrasound transducer acoustically coupled to the target. The resolution of conventional PAM is limited by the sensitivity and bandwidth of the ultrasound transducer. We investigated a versatile, all-optical PAM (AOPAM) system for characterizing in vivo as well as ex vivo biological specimens. The system employs non-contact interferometric detection of PA signals that overcomes limitations of conventional PAM. A 532-nm pump laser with a pulse duration of 5 ns excites the PA effect in tissue. Resulting acoustic waves produce surface displacements that are sensed using a 532-nm continuous-wave (CW) probe laser in a Michelson interferometer with a 1- GHz bandwidth. The pump and probe beams are coaxially focused using a 50X objective giving a diffraction-limited spot size of 0.48 μm. The phase-encoded probe beam is demodulated using homodyne methods. The detected timedomain signal is time reversed using k-space wave-propagation methods to produce a spatial distribution of PA sources in the target tissue. A minimum surface-displacement sensitivity of 0.19 pm was measured. PA-induced surface displacements are very small; therefore, they impose stringent detection requirements and determine the feasibility of implementing an all-optical PAM in biomedical applications. 3D PA images of ex vivo porcine retina specimens were generated successfully. We believe the AOPAM system potentially is well suited for assessing retinal diseases and other near-surface biomedical applications such as sectionless histology and evaluation of skin burns and pressure or friction ulcers.

  19. All-optical optoacoustic microscopy system based on probe beam deflection technique

    NASA Astrophysics Data System (ADS)

    Maswadi, Saher M.; Tsyboulskic, Dmitri; Roth, Caleb C.; Glickman, Randolph D.; Beier, Hope T.; Oraevsky, Alexander A.; Ibey, Bennett L.

    2016-03-01

    It is difficult to achieve sub-micron resolution in backward mode OA microscopy using conventional piezoelectric detectors, because of wavefront distortions caused by components placed in the optical path, between the sample and the objective lens, that are required to separate the acoustic wave from the optical beam. As an alternate approach, an optoacoustic microscope (OAM) was constructed using the probe beam deflection technique (PBDT) to detect laserinduced acoustic signals. The all-optical OAM detects laser-generated pressure waves using a probe beam passing through a coupling medium, such as water, filling the space between the microscope objective lens and sample. The acoustic waves generated in the sample propagate through the coupling medium, causing transient changes in the refractive index that deflect the probe beam. These deflections are measured with a high-speed, balanced photodiode position detector. The deflection amplitude is directly proportional to the magnitude of the acoustic pressure wave, and provides the data required for image reconstruction. The sensitivity of the PBDT detector expressed as noise equivalent pressure was 12 Pa, comparable to that of existing high-performance ultrasound detectors. Because of the unimpeded working distance, a high numerical aperture objective lens, i.e. NA = 1, was employed in the OAM to achieve near diffraction-limited lateral resolution of 0.5 μm at 532nm. The all-optical OAM provides several benefits over current piezoelectric detector-based systems, such as increased lateral and axial resolution, higher sensitivity, robustness, and potentially more compatibility with multimodal instruments.

  20. Fuzzy logic controller optimization

    DOEpatents

    Sepe, Jr., Raymond B; Miller, John Michael

    2004-03-23

    A method is provided for optimizing a rotating induction machine system fuzzy logic controller. The fuzzy logic controller has at least one input and at least one output. Each input accepts a machine system operating parameter. Each output produces at least one machine system control parameter. The fuzzy logic controller generates each output based on at least one input and on fuzzy logic decision parameters. Optimization begins by obtaining a set of data relating each control parameter to at least one operating parameter for each machine operating region. A model is constructed for each machine operating region based on the machine operating region data obtained. The fuzzy logic controller is simulated with at least one created model in a feedback loop from a fuzzy logic output to a fuzzy logic input. Fuzzy logic decision parameters are optimized based on the simulation.

  1. General Strategy for Broadband Coherent Perfect Absorption and Multi-wavelength All-optical Switching Based on Epsilon-Near-Zero Multilayer Films

    PubMed Central

    Kim, Tae Young; Badsha, Md. Alamgir; Yoon, Junho; Lee, Seon Young; Jun, Young Chul; Hwangbo, Chang Kwon

    2016-01-01

    We propose a general, easy-to-implement scheme for broadband coherent perfect absorption (CPA) using epsilon-near-zero (ENZ) multilayer films. Specifically, we employ indium tin oxide (ITO) as a tunable ENZ material, and theoretically investigate CPA in the near-infrared region. We first derive general CPA conditions using the scattering matrix and the admittance matching methods. Then, by combining these two methods, we extract analytic expressions for all relevant parameters for CPA. Based on this theoretical framework, we proceed to study ENZ CPA in a single layer ITO film and apply it to all-optical switching. Finally, using an ITO multilayer of different ENZ wavelengths, we implement broadband ENZ CPA structures and investigate multi-wavelength all-optical switching in the technologically important telecommunication window. In our design, the admittance matching diagram was employed to graphically extract not only the structural parameters (the film thicknesses and incident angles), but also the input beam parameters (the irradiance ratio and phase difference between two input beams). We find that the multi-wavelength all-optical switching in our broadband ENZ CPA system can be fully controlled by the phase difference between two input beams. The simple but general design principles and analyses in this work can be widely used in various thin-film devices. PMID:26965195

  2. General Strategy for Broadband Coherent Perfect Absorption and Multi-wavelength All-optical Switching Based on Epsilon-Near-Zero Multilayer Films.

    PubMed

    Kim, Tae Young; Badsha, Md Alamgir; Yoon, Junho; Lee, Seon Young; Jun, Young Chul; Hwangbo, Chang Kwon

    2016-01-01

    We propose a general, easy-to-implement scheme for broadband coherent perfect absorption (CPA) using epsilon-near-zero (ENZ) multilayer films. Specifically, we employ indium tin oxide (ITO) as a tunable ENZ material, and theoretically investigate CPA in the near-infrared region. We first derive general CPA conditions using the scattering matrix and the admittance matching methods. Then, by combining these two methods, we extract analytic expressions for all relevant parameters for CPA. Based on this theoretical framework, we proceed to study ENZ CPA in a single layer ITO film and apply it to all-optical switching. Finally, using an ITO multilayer of different ENZ wavelengths, we implement broadband ENZ CPA structures and investigate multi-wavelength all-optical switching in the technologically important telecommunication window. In our design, the admittance matching diagram was employed to graphically extract not only the structural parameters (the film thicknesses and incident angles), but also the input beam parameters (the irradiance ratio and phase difference between two input beams). We find that the multi-wavelength all-optical switching in our broadband ENZ CPA system can be fully controlled by the phase difference between two input beams. The simple but general design principles and analyses in this work can be widely used in various thin-film devices. PMID:26965195

  3. General Strategy for Broadband Coherent Perfect Absorption and Multi-wavelength All-optical Switching Based on Epsilon-Near-Zero Multilayer Films

    NASA Astrophysics Data System (ADS)

    Kim, Tae Young; Badsha, Md. Alamgir; Yoon, Junho; Lee, Seon Young; Jun, Young Chul; Hwangbo, Chang Kwon

    2016-03-01

    We propose a general, easy-to-implement scheme for broadband coherent perfect absorption (CPA) using epsilon-near-zero (ENZ) multilayer films. Specifically, we employ indium tin oxide (ITO) as a tunable ENZ material, and theoretically investigate CPA in the near-infrared region. We first derive general CPA conditions using the scattering matrix and the admittance matching methods. Then, by combining these two methods, we extract analytic expressions for all relevant parameters for CPA. Based on this theoretical framework, we proceed to study ENZ CPA in a single layer ITO film and apply it to all-optical switching. Finally, using an ITO multilayer of different ENZ wavelengths, we implement broadband ENZ CPA structures and investigate multi-wavelength all-optical switching in the technologically important telecommunication window. In our design, the admittance matching diagram was employed to graphically extract not only the structural parameters (the film thicknesses and incident angles), but also the input beam parameters (the irradiance ratio and phase difference between two input beams). We find that the multi-wavelength all-optical switching in our broadband ENZ CPA system can be fully controlled by the phase difference between two input beams. The simple but general design principles and analyses in this work can be widely used in various thin-film devices.

  4. Paraconsistent quantum logics

    NASA Astrophysics Data System (ADS)

    Chiara, Maria Luisa Dalla; Giuntini, Roberto

    1989-07-01

    Paraconsistent quantum logics are weak forms of quantum logic, where the noncontradiction and the excluded-middle laws are violated. These logics find interesting applications in the operational approach to quantum mechanics. In this paper, we present an axiomatization, a Kripke-style, and an algebraic semantical characterization for two forms of paraconsistent quantum logic. Further developments are contained in Giuntini and Greuling's paper in this issue.

  5. Partial quantum logics revisited

    NASA Astrophysics Data System (ADS)

    Vetterlein, Thomas

    2011-01-01

    Partial Boolean algebras (PBAs) were introduced by Kochen and Specker as an algebraic model reflecting the mutual relationships among quantum-physical yes-no tests. The fact that not all pairs of tests are compatible was taken into special account. In this paper, we review PBAs from two sides. First, we generalise the concept, taking into account also those yes-no tests which are based on unsharp measurements. Namely, we introduce partial MV-algebras, and we define a corresponding logic. Second, we turn to the representation theory of PBAs. In analogy to the case of orthomodular lattices, we give conditions for a PBA to be isomorphic to the PBA of closed subspaces of a complex Hilbert space. Hereby, we do not restrict ourselves to purely algebraic statements; we rather give preference to conditions involving automorphisms of a PBA. We conclude by outlining a critical view on the logico-algebraic approach to the foundational problem of quantum physics.

  6. The semantics of fuzzy logic

    NASA Technical Reports Server (NTRS)

    Ruspini, Enrique H.

    1991-01-01

    Summarized here are the results of recent research on the conceptual foundations of fuzzy logic. The focus is primarily on the principle characteristics of a model that quantifies resemblance between possible worlds by means of a similarity function that assigns a number between 0 and 1 to every pair of possible worlds. Introduction of such a function permits one to interpret the major constructs and methods of fuzzy logic: conditional and unconditional possibility and necessity distributions and the generalized modus ponens of Zadeh on the basis of related metric relationships between subsets of possible worlds.

  7. OncoLogicTM

    EPA Science Inventory

    OncoLogicTM - A Computer System to Evaluate the Carcinogenic Potential of Chemicals
    OncoLogicTM is a software program that evaluates the likelihood that a chemical may cause cancer. OncoLogicTM has been peer reviewed and is being rele...

  8. All-optical cryptography of M-QAM formats by using two-dimensional spectrally sliced keys.

    PubMed

    Abbade, Marcelo L F; Cvijetic, Milorad; Messani, Carlos A; Alves, Cleiton J; Tenenbaum, Stefan

    2015-05-10

    There has been an increased interest in enhancing the security of optical communications systems and networks. All-optical cryptography methods have been considered as an alternative to electronic data encryption. In this paper we propose and verify the use of a novel all-optical scheme based on cryptographic keys applied on the spectral signal for encryption of the M-QAM modulated data with bit rates of up to 200 gigabits per second. PMID:25967489

  9. Domain size criterion for the observation of all-optical helicity-dependent switching in magnetic thin films

    NASA Astrophysics Data System (ADS)

    El Hadri, Mohammed Salah; Hehn, Michel; Pirro, Philipp; Lambert, Charles-Henri; Malinowski, Grégory; Fullerton, Eric E.; Mangin, Stéphane

    2016-08-01

    To understand the necessary condition for the observation of all-optical helicity-dependent switching (AO-HDS) of magnetization in thin films, we investigated ferromagnetic Co/Pt and Co/Ni multilayers as well as ferrimagnetic TbCo alloys as a function of magnetic layer compositions and thicknesses. We show that both ferro- and ferrimagnets with high saturation magnetization show AO-HDS if their magnetic thickness is strongly reduced below a material-dependent threshold thickness. By taking into account the demagnetizing energy and the domain wall energy, we are able to define a criterion to predict whether AO-HDS or thermal demagnetization (TD) will be observed. This criterion for the observation of AO-HDS is that the equilibrium size of magnetic domains forming during the cooling process should be larger than the laser spot size. From these results we anticipate that more magnetic materials are expected to show AO-HDS. However, the effect of the optical pulses' helicity is hidden by the formation of small magnetic domains during the cooling process.

  10. All-optical devices based on carrier nonlinearities for optical filtering and spectral equalization

    NASA Astrophysics Data System (ADS)

    Burger, Johan Petrus

    InGaAsP-based quantum wells can display nonlinear refractive index changes of ~0.1 near the band-edge for intrawell carrier density changes of 1 × 1018cm-3, due to effects like bandfilling and the plasma effect, which make these materials promising for the realization of all-optical signal processing devices, as demonstrated here. A novel single passband filter with sub-gigahertz bandwidth and greater than 40nm of tunability was experimentally demonstrated. The filter uses the detuning characteristics of nearly degenerate four-wave mixing in a broad area semiconductor optical amplifier to obtain frequency selectivity. The key to this demonstration was the spatial separation of the filtered signal from the input signal, based on their different propagation directions. An analysis of an analogous integrated optic dual-order mode nonlinear mode-converter, with integrated mode sorters which separate the signal from the interacting modes, was also undertaken. This device is promising as a filter, a wavelength converter, notch filter, and a wavelength recognizing switch. Novel ways to prevent carrier diffusion, which washes out the nonlinear grating, were suggested. It is important to have a large mutual overlap to modal overlap ratio of the two interacting modes on the nonlinear medium, because the mixing efficiency scales as the fourth power of this number. Three types of integrated optic limiters (based on Kerr- like nonlinearities) namely an all-optical cutoff modulator, a nonlinear Y-branch and an interferometer with an internal Kerr element, were theoretically investigated. A beam propagation program, which can solve the propagation of an optical field in a semiconductor in the presence of carrier diffusion, was developed for the numerical analysis of these structures. A negative feedback mechanism was identified in the Y-branch devices and a new limiting configuration was discovered in a Y- branch with a selectively placed defocusing nonlinearity. Dichroic

  11. Ultralow bias power all-optical photonic crystal memory realized with systematically tuned L3 nanocavity

    SciTech Connect

    Kuramochi, Eiichi Nozaki, Kengo; Shinya, Akihiko; Taniyama, Hideaki; Notomi, Masaya; Takeda, Koji; Matsuo, Shinji; Sato, Tomonari

    2015-11-30

    An InP photonic crystal nanocavity with an embedded InGaAsP active region is a unique technology that has realized an all-optical memory with a sub-micro-watt operating power and limitless storage time. In this study, we employed an L3 design with systematic multi-hole tuning, which realized a higher loaded Q factor (>40 000) and a lower mode volume (0.9 μm{sup 3}) than a line-defect-based buried-heterostructure nanocavity (16 000 and 2.2 μm{sup 3}). Excluding the active region realized a record loaded Q factor (210 000) in all for InP-based nanocavities. The minimum bias power for bistable memory operation was reduced to 2.3 ± 0.3 nW, which is about 1/10 of the previous record of 30 nW. This work further established the capability of a bistable nanocavity memory for use in future ultralow-power-consumption on-chip integrated photonics.

  12. Gold nanoparticle-assisted all optical localized stimulation and monitoring of Ca2+ signaling in neurons

    NASA Astrophysics Data System (ADS)

    Lavoie-Cardinal, Flavie; Salesse, Charleen; Bergeron, Éric; Meunier, Michel; de Koninck, Paul

    2016-02-01

    Light-assisted manipulation of cells to control membrane activity or intracellular signaling has become a major avenue in life sciences. However, the ability to perform subcellular light stimulation to investigate localized signaling has been limited. Here, we introduce an all optical method for the stimulation and the monitoring of localized Ca2+ signaling in neurons that takes advantage of plasmonic excitation of gold nanoparticles (AuNPs). We show with confocal microscopy that 800 nm laser pulse application onto a neuron decorated with a few AuNPs triggers a transient increase in free Ca2+, measured optically with GCaMP6s. We show that action potentials, measured electrophysiologically, can be induced with this approach. We demonstrate activation of local Ca2+ transients and Ca2+ signaling via CaMKII in dendritic domains, by illuminating a single or few functionalized AuNPs specifically targeting genetically-modified neurons. This NP-Assisted Localized Optical Stimulation (NALOS) provides a new complement to light-dependent methods for controlling neuronal activity and cell signaling.

  13. Proposal of all-optical sensor based on nonlinear MMI coupler for multi-purpose usage

    NASA Astrophysics Data System (ADS)

    Tajaldini, M.; MatJafri, M. Z.

    2015-10-01

    In this study, we propose an all-optical sensor based on consideration the nonlinear effects on modal propagation and output intensity based on ultra-compact nonlinear multimode interference (NLMMI) coupler. The sensor can be tuned to highest sensitivity in the wavelength and refractive index ranges sufficient to detect water- soluble chemical, air pollutions, and heart operation. The results indicate high output sensitivity to input wavelength. This sensitivity guides us to propose a wave sensor both transverse and longitudinal waves such as acoustic and light wave, when an external wave interacts with input waveguide. For instance, this sensor can be implemented by long input that inserted in the land, then any wave could detected from earth. The visible changes of intensity at output facet in various surrounding layer refractive index show the high sensitivity to the refractive index of surrounding layer that is foundation of introducing a sensor. Also, the results show the high distinguished changes on modal expansion and output throat distribution in various refractive indices of surrounding layer.

  14. All-optical modulation in Mid-Wavelength Infrared using porous Si membranes

    NASA Astrophysics Data System (ADS)

    Park, Sung Jin; Zakar, Ammar; Zerova, Vera L.; Chekulaev, Dimitri; Canham, Leigh T.; Kaplan, Andre

    2016-07-01

    We demonstrate for the first time the possibility of all-optical modulation of self-standing porous Silicon (pSi) membrane in the Mid-Wavelength Infrared (MWIR) range using femtosecond pump-probe techniques. To study optical modulation, we used pulses of an 800 nm, 60 femtosecond for pump and a MWIR tunable probe in the spectral range between 3.5 and 4.4 μm. We show that pSi possesses a natural transparency window centred around 4 μm. Yet, about 55% of modulation contrast can be achieved by means of optical excitation at the pump power of 60 mW (4.8 mJ/cm2). Our analysis shows that the main mechanism of the modulation is interaction of the MWIR signal with the free charge carrier excited by the pump. The time-resolved measurements showed a sub-picosecond rise time and a recovery time of about 66 ps, which suggests a modulation speed performance of ~15 GHz. This optical modulation of pSi membrane in MWIR can be applied to a variety of applications such as thermal imaging and free space communications.

  15. All-optical central-frequency-programmable and bandwidth-tailorable radar

    PubMed Central

    Zou, Weiwen; Zhang, Hao; Long, Xin; Zhang, Siteng; Cui, Yuanjun; Chen, Jianping

    2016-01-01

    Radar has been widely used for military, security, and rescue purposes, and modern radar should be reconfigurable at multi-bands and have programmable central frequencies and considerable bandwidth agility. Microwave photonics or photonics-assisted radio-frequency technology is a unique solution to providing such capabilities. Here, we demonstrate an all-optical central-frequency-programmable and bandwidth-tailorable radar architecture that provides a coherent system and utilizes one mode-locked laser for both signal generation and reception. Heterodyning of two individually filtered optical pulses that are pre-chirped via wavelength-to-time mapping generates a wideband linearly chirped radar signal. The working bands can be flexibly tailored with the desired bandwidth at a user-preferred carrier frequency. Radar echoes are first modulated onto the pre-chirped optical pulse, which is also used for signal generation, and then stretched in time or compressed in frequency several fold based on the time-stretch principle. Thus, digitization is facilitated without loss of detection ability. We believe that our results demonstrate an innovative radar architecture with an ultra-high-range resolution. PMID:26795596

  16. Nanophotonic technologies for innovative all- optical signal processor using photonic crystals and quantum dots

    SciTech Connect

    Sugimoto, Y.; Ikeda, N.; Ozaki, N.; Watanabe, Y.; Asakawa, K.; Ohkouchi, S.; Nakamura, S.

    2009-06-29

    GaAs-based two-dimensional photonic crystal (2DPC) slab waveguides (WGs) and InAs quantum dots (QDs) were developed for key photonic device structures in the future. An ultrasmall and ultrafast symmetrical Mach-Zehnder (SMZ)-type all-optical switch (PC-SMZ) and an optical flip-flop device (PC-FF) have been developed based on these nanophotonic structures for an ultrafast digital photonic network. To realize these devices, two important techniques were developed. One is a new simulation method, i.e., topology optimization method of 2DPC WGs with wide/flat bandwidth, high transmittance and low reflectivity. Another is a new selective-area-growth method, i.e., metal-mask molecular beam epitaxy method of InAs QDs. This technique contributes to achieving high-density and highly uniform InAs QDs in a desired area such as an optical nonlinearity-induced phase shift arm in the PC-FF. Furthermore, as a unique site-controlled QD technique, a nano-jet probe method is also developed for positioning QDs at the centre of the optical nonlinearity-induced phase shift arm.

  17. A simple and effective theory for all-optical helicity-dependent spin switching

    NASA Astrophysics Data System (ADS)

    Zhang, Guoping; Bai, Yihua; George, Thomas F.

    All-optical helicity-dependent spin switching (AOS) represents a new frontier in magnetic recording technology, where a single ultrafast laser pulse, without any assistance from an external magnetic field, can permanently switch spin within a few hundred femtoseconds. By contrast, the existing theory does rely on an artificial magnetic field to switch spins. Here we develop a microscopic spin switch theory, free of any artificial field, and demonstrate unambiguously that both circularly and linearly polarized lights can switch spins faithfully. Our theory is based on the Hookean theory, but includes two new elements: spin-orbit coupling and exchange interaction. We predict that left (right) circularly polarized light only flips (flops) spin, a symmetry constraint that strongly favors ferrimagnetic orderings over ferromagnetic ones, with the allowable exchange interaction within 10 meV, consistent with all prior theories. The effect of the laser amplitude is highly nonlinear: If it is too weak, AOS does not occur, but if too strong, the spin cants; a compromise between them produces a narrow spin reversal window as observed experimentally. We envision that our model can be easily extended to describe spin frustrated systems and multiferroics, where the light-spin interaction Supported by the U.S. Department of Energy under Contract No. DE-FG02-06ER46304 and the National Energy Research Scientific Computing Center.

  18. Rapid, all-optical crystal orientation imaging of two-dimensional transition metal dichalcogenide monolayers

    SciTech Connect

    David, Sabrina N.; Zhai, Yao; Zande, Arend M. van der; O'Brien, Kevin; Huang, Pinshane Y.; Chenet, Daniel A.; Hone, James C.; Zhang, Xiang; Yin, Xiaobo

    2015-09-14

    Two-dimensional (2D) atomic materials such as graphene and transition metal dichalcogenides (TMDCs) have attracted significant research and industrial interest for their electronic, optical, mechanical, and thermal properties. While large-area crystal growth techniques such as chemical vapor deposition have been demonstrated, the presence of grain boundaries and orientation of grains arising in such growths substantially affect the physical properties of the materials. There is currently no scalable characterization method for determining these boundaries and orientations over a large sample area. We here present a second-harmonic generation based microscopy technique for rapidly mapping grain orientations and boundaries of 2D TMDCs. We experimentally demonstrate the capability to map large samples to an angular resolution of ±1° with minimal sample preparation and without involved analysis. A direct comparison of the all-optical grain orientation maps against results obtained by diffraction-filtered dark-field transmission electron microscopy plus selected-area electron diffraction on identical TMDC samples is provided. This rapid and accurate tool should enable large-area characterization of TMDC samples for expedited studies of grain boundary effects and the efficient characterization of industrial-scale production techniques.

  19. All-optical OFDM transmitter design using AWGRs and low-bandwidth modulators

    NASA Astrophysics Data System (ADS)

    Lowery, Arthur James; Du, Liang

    2011-08-01

    An Arrayed-Waveguide Grating Router (AWGR) can be used as a demultiplexer for an optical OFDM system, as it provides both the serial-to-parallel converter and the optical Fourier transform (FT) in one component. Because an inverse FT is topologically identical to a Fourier transform, the AWGR can also be used as a FT in an OFDM transmitter. In most all-optical OFDM systems the optical modulators are fed with CW tones; however, the subcarriers (SC) will only be perfectly orthogonal if the bandwidth of the data modulators is similar to the total bandwidth of all subcarriers. Using simulations, this paper investigates the reduction in modulator bandwidth that could be achieved if the modulators are placed before an AWGR designed as a FT. This arrangement also allows the complex (IQ) modulators to be replaced with simpler and more-compact phase modulators. We show that these design improvements enable 7.5-GHz bandwidth modulators to be used in a 4 - 10 Gsymbol/s (80 Gbit/s) per polarization per wavelength system.

  20. Current Developments on Optical Feedback Interferometry as an All-Optical Sensor for Biomedical Applications.

    PubMed

    Perchoux, Julien; Quotb, Adam; Atashkhooei, Reza; Azcona, Francisco J; Ramírez-Miquet, Evelio E; Bernal, Olivier; Jha, Ajit; Luna-Arriaga, Antonio; Yanez, Carlos; Caum, Jesus; Bosch, Thierry; Royo, Santiago

    2016-01-01

    Optical feedback interferometry (OFI) sensors are experiencing a consistent increase in their applications to biosensing due to their contactless nature, low cost and compactness, features that fit very well with current biophotonics research and market trends. The present paper is a review of the work in progress at UPC-CD6 and LAAS-CNRS related to the application of OFI to different aspects of biosensing, both in vivo and ex vivo. This work is intended to present the variety of opportunities and potential applications related to OFI that are available in the field. The activities presented are divided into two main sensing strategies: The measurement of optical path changes and the monitoring of flows, which correspond to sensing strategies linked to the reconstruction of changes of amplitude from the interferometric signal, and to classical Doppler frequency measurements, respectively. For optical path change measurements, measurements of transient pulses, usual in biosensing, together with the measurement of large displacements applied to designing palliative care instrumentation for Parkinson disease are discussed. Regarding the Doppler-based approach, progress in flow-related signal processing and applications in real-time monitoring of non-steady flows, human blood flow monitoring and OFI pressure myograph sensing will be presented. In all cases, experimental setups are discussed and results presented, showing the versatility of the technique. The described applications show the wide capabilities in biosensing of the OFI sensor, showing it as an enabler of low-cost, all-optical, high accuracy biomedical applications. PMID:27187406

  1. Analysis of all-optical light modulation in proteorhodopsin protein molecules

    NASA Astrophysics Data System (ADS)

    Roy, Sukhdev; Sharma, Parag

    2008-03-01

    We present a detailed steady-state and time-dependent theoretical analysis of all-optical light modulation in the recently discovered, wild-type proteorhodopsin (WTpR) protein molecules based on excited-state absorption. Amplitude modulation of cw probe laser beam transmissions at 520, 405, 555 and 560 nm, corresponding to the peak absorption of pR, pRM, pRK and pRN intermediate states of pR photocycle, respectively, by cw and pulsed modulating pump laser beam at 520 nm have been analyzed. The effect of various spectral and kinetic parameters on modulation characteristics has been studied. There is an optimum value of concentration for a given pump intensity value for which maximum modulation of the probe beam can be achieved. The switching characteristics of probe beam at 405 and 520 nm exhibit dip and peak, respectively, which can be removed by decreasing the absorption of pRM state at 520 nm. The modulation in WTpR is at lower pump powers with smaller contrast in comparison to WT bacteriorhodopsin (bR) and WT pharaonis phoborhodopsin (ppR). The modulation characteristics exhibit unique features compared to bR and ppR.

  2. All-optical central-frequency-programmable and bandwidth-tailorable radar.

    PubMed

    Zou, Weiwen; Zhang, Hao; Long, Xin; Zhang, Siteng; Cui, Yuanjun; Chen, Jianping

    2016-01-01

    Radar has been widely used for military, security, and rescue purposes, and modern radar should be reconfigurable at multi-bands and have programmable central frequencies and considerable bandwidth agility. Microwave photonics or photonics-assisted radio-frequency technology is a unique solution to providing such capabilities. Here, we demonstrate an all-optical central-frequency-programmable and bandwidth-tailorable radar architecture that provides a coherent system and utilizes one mode-locked laser for both signal generation and reception. Heterodyning of two individually filtered optical pulses that are pre-chirped via wavelength-to-time mapping generates a wideband linearly chirped radar signal. The working bands can be flexibly tailored with the desired bandwidth at a user-preferred carrier frequency. Radar echoes are first modulated onto the pre-chirped optical pulse, which is also used for signal generation, and then stretched in time or compressed in frequency several fold based on the time-stretch principle. Thus, digitization is facilitated without loss of detection ability. We believe that our results demonstrate an innovative radar architecture with an ultra-high-range resolution. PMID:26795596

  3. Design of photonic crystal-based all-optical AND gate using T-shaped waveguide

    NASA Astrophysics Data System (ADS)

    haq Shaik, Enaul; Rangaswamy, Nakkeeran

    2016-05-01

    We present a new configuration of all-optical AND gate based on two-dimensional photonic crystal composed of Si rods in air. Two AND gate structures with and without probe input are proposed. The proposed structures are designed with T-shaped waveguide without using nonlinear materials and optical amplifiers. The performance of the proposed AND gate structures is analyzed and simulated by plane-wave expansion and finite difference time domain methods. The AND gate without probe input needs only one T-shaped waveguide, whereas the AND gate with probe input needs two T-shaped waveguides. The former AND gate offers a bit rate of 6.26 Tbps with a contrast ratio of 5.74 dB, whereas the latter AND gate offers a bit rate of 3.58 Tbps whose contrast ratio is 9.66 dB. It can be expected that these small size T-shaped structures are suitable for large-scale integration and can potentially be used in on-chip photonic integrated circuits.

  4. All-optical central-frequency-programmable and bandwidth-tailorable radar

    NASA Astrophysics Data System (ADS)

    Zou, Weiwen; Zhang, Hao; Long, Xin; Zhang, Siteng; Cui, Yuanjun; Chen, Jianping

    2016-01-01

    Radar has been widely used for military, security, and rescue purposes, and modern radar should be reconfigurable at multi-bands and have programmable central frequencies and considerable bandwidth agility. Microwave photonics or photonics-assisted radio-frequency technology is a unique solution to providing such capabilities. Here, we demonstrate an all-optical central-frequency-programmable and bandwidth-tailorable radar architecture that provides a coherent system and utilizes one mode-locked laser for both signal generation and reception. Heterodyning of two individually filtered optical pulses that are pre-chirped via wavelength-to-time mapping generates a wideband linearly chirped radar signal. The working bands can be flexibly tailored with the desired bandwidth at a user-preferred carrier frequency. Radar echoes are first modulated onto the pre-chirped optical pulse, which is also used for signal generation, and then stretched in time or compressed in frequency several fold based on the time-stretch principle. Thus, digitization is facilitated without loss of detection ability. We believe that our results demonstrate an innovative radar architecture with an ultra-high-range resolution.

  5. All-optical anatomical co-registration for molecular imaging of small animals using dynamic contrast

    NASA Astrophysics Data System (ADS)

    Hillman, Elizabeth M. C.; Moore, Anna

    2007-09-01

    Optical molecular imaging in small animals harnesses the power of highly specific and biocompatible contrast agents for drug development and disease research. However, the widespread adoption of in vivo optical imaging has been inhibited by its inability to clearly resolve and identify targeted internal organs. Optical tomography and combined X-ray and micro-computed tomography (micro-CT) approaches developed to address this problem are generally expensive, complex or incapable of true anatomical co-registration. Here, we present a remarkably simple all-optical method that can generate co-registered anatomical maps of a mouse's internal organs, while also acquiring in vivo molecular imaging data. The technique uses a time series of images acquired after injection of an inert dye. Differences in the dye's in vivo biodistribution dynamics allow precise delineation and identification of major organs. Such co-registered anatomical maps permit longitudinal organ identification irrespective of repositioning or weight gain, thereby promising greatly improved accuracy and versatility for studies of orthotopic disease, diagnostics and therapies.

  6. Green Distributed Quality of Transmission Aware Routing and Wavelength Assignment in All-Optical Networks

    NASA Astrophysics Data System (ADS)

    Kakekhani, Amir; Rahbar, Akbar Ghaffarpour

    2013-06-01

    The Routing and Wavelength Assignment (RWA) algorithms that consider quality of transmission (QoT) in light-path setup spend more time than their conventional counterparts due to exhaustive search and QoT estimation. This paper proposes distributed Quality of Transmission Aware Routing and Wavelength Assignment (QARWA) algorithm to handle dynamic light-path provisioning in wavelength routed all-optical networks taking energy consumption of optical switch nodes into account. Specifically, the QARWA considers bit-error rate (BER), setup delay, and energy consumption constraints at the same time, and establishes light-paths with small BER, low setup latency, and reduced energy consumption. We present and evaluate an enhanced wavelength-assignment solution in the QARWA to handle the wavelength continuity constraint. In QARWA, a source node determines the connection path by means of the shortest path algorithm and a destination node selects a wavelength based on the BER limitation and decreasing order of setup latency. Relating energy consumption to processing time, we show that QARWA can decrease the total energy consumption by reducing the processing time at each node. Under QARWA, when a node finishes the processing of the last control packet, it makes transition to either sleep state or idle state. Hence, QARWA can provide the best performance since it can reduce processing time in control units, light-path setup latency, and energy consumption of nodes.

  7. All-optical frame clock recovery from even-multiplexed OTDM signals

    NASA Astrophysics Data System (ADS)

    Yin, Lina; Liu, Guoming; Wu, Jian; Lin, Jintong

    2005-02-01

    Frame clock is useful for packet processing such as header detection and payload demultiplexing. A novel all-optical frame clock recovery scheme based on "intensity reshaper" and mode-locked semiconductor fiber ring laser is demonstrated. The "intensity reshaper" including a polarization controller and a polarizer is the key element to realize frame clock recovery from equal-amplitude even-multiplexed OTDM signals. In theory, a mathematical expression is given to analyze the intensity of harmonic of clock-frequency component. The relative intensity of each clock-frequency component will change with the alterative angle caused by adjusting the PC in the "intensity reshaper", so the desirable clock-frequency component can be enhanced, which is helpful for clock recovery. Moreover, the intensity of harmonic of clock-frequency component is also related to the pulse amplitude, width and period in the multiplexed data. In experiment, 2.5GHz frame clock is extracted from even-multiplexed 4x2.5GHz and 8x2.5GHz OTDM signals respectively. At the same time, bit clock is also recovered by using this scheme. The extracted clock pulses have several desirable features such as low timing jitter, broad wavelength tuning range and polarization independence. This scheme simplifies signal generation and propagation in OTDM systems, which can be applied to clock recovery in high-speed OTDM network.

  8. All-optical OFDM transmitter design using AWGRs and low-bandwidth modulators.

    PubMed

    Lowery, Arthur James; Du, Liang

    2011-08-15

    An Arrayed-Waveguide Grating Router (AWGR) can be used as a demultiplexer for an optical OFDM system, as it provides both the serial-to-parallel converter and the optical Fourier transform (FT) in one component. Because an inverse FT is topologically identical to a Fourier transform, the AWGR can also be used as a FT in an OFDM transmitter. In most all-optical OFDM systems the optical modulators are fed with CW tones; however, the subcarriers (SC) will only be perfectly orthogonal if the bandwidth of the data modulators is similar to the total bandwidth of all subcarriers. Using simulations, this paper investigates the reduction in modulator bandwidth that could be achieved if the modulators are placed before an AWGR designed as a FT. This arrangement also allows the complex (IQ) modulators to be replaced with simpler and more-compact phase modulators. We show that these design improvements enable 7.5-GHz bandwidth modulators to be used in a 4 × 10 Gsymbol/s (80 Gbit/s) per polarization per wavelength system. PMID:21934931

  9. Current Developments on Optical Feedback Interferometry as an All-Optical Sensor for Biomedical Applications

    PubMed Central

    Perchoux, Julien; Quotb, Adam; Atashkhooei, Reza; Azcona, Francisco J.; Ramírez-Miquet, Evelio E.; Bernal, Olivier; Jha, Ajit; Luna-Arriaga, Antonio; Yanez, Carlos; Caum, Jesus; Bosch, Thierry; Royo, Santiago

    2016-01-01

    Optical feedback interferometry (OFI) sensors are experiencing a consistent increase in their applications to biosensing due to their contactless nature, low cost and compactness, features that fit very well with current biophotonics research and market trends. The present paper is a review of the work in progress at UPC-CD6 and LAAS-CNRS related to the application of OFI to different aspects of biosensing, both in vivo and ex vivo. This work is intended to present the variety of opportunities and potential applications related to OFI that are available in the field. The activities presented are divided into two main sensing strategies: The measurement of optical path changes and the monitoring of flows, which correspond to sensing strategies linked to the reconstruction of changes of amplitude from the interferometric signal, and to classical Doppler frequency measurements, respectively. For optical path change measurements, measurements of transient pulses, usual in biosensing, together with the measurement of large displacements applied to designing palliative care instrumentation for Parkinson disease are discussed. Regarding the Doppler-based approach, progress in flow-related signal processing and applications in real-time monitoring of non-steady flows, human blood flow monitoring and OFI pressure myograph sensing will be presented. In all cases, experimental setups are discussed and results presented, showing the versatility of the technique. The described applications show the wide capabilities in biosensing of the OFI sensor, showing it as an enabler of low-cost, all-optical, high accuracy biomedical applications. PMID:27187406

  10. Ultralow bias power all-optical photonic crystal memory realized with systematically tuned L3 nanocavity

    NASA Astrophysics Data System (ADS)

    Kuramochi, Eiichi; Nozaki, Kengo; Shinya, Akihiko; Taniyama, Hideaki; Takeda, Koji; Sato, Tomonari; Matsuo, Shinji; Notomi, Masaya

    2015-11-01

    An InP photonic crystal nanocavity with an embedded InGaAsP active region is a unique technology that has realized an all-optical memory with a sub-micro-watt operating power and limitless storage time. In this study, we employed an L3 design with systematic multi-hole tuning, which realized a higher loaded Q factor (>40 000) and a lower mode volume (0.9 μm3) than a line-defect-based buried-heterostructure nanocavity (16 000 and 2.2 μm3). Excluding the active region realized a record loaded Q factor (210 000) in all for InP-based nanocavities. The minimum bias power for bistable memory operation was reduced to 2.3 ± 0.3 nW, which is about 1/10 of the previous record of 30 nW. This work further established the capability of a bistable nanocavity memory for use in future ultralow-power-consumption on-chip integrated photonics.

  11. Ultra fast all-optical fiber pressure sensor for blast event evaluation

    NASA Astrophysics Data System (ADS)

    Wu, Nan; Wang, Wenhui; Tian, Ye; Niezrecki, Christopher; Wang, Xingwei

    2011-05-01

    Traumatic brain injury (TBI) is a great potential threat to soldiers who are exposed to explosions or athletes who receive cranial impacts. Protecting people from TBI has recently attracted a significant amount of attention due to recent military operations in the Middle East. Recording pressure transient data in a blast event is very critical to the understanding of the effects of blast events on TBI. However, due to the fast change of the pressure during blast events, very few sensors have the capability to effectively track the dynamic pressure transients. This paper reports an ultra fast, miniature and all-optical fiber pressure sensor which could be mounted at different locations of a helmet to measure the fast changing pressure simultaneously. The sensor is based on Fabry-Perot (FP) principle. The end face of the fiber is wet etched. A well controlled thickness silicon dioxide diaphragm is thermal bonded on the end face to form an FP cavity. A shock tube test was conducted at Natick Soldier Research Development and Engineering Center, where the sensors were mounted in a shock tube side by side with a reference sensor to measure the rapidly changing pressure. The results of the test demonstrated that the sensor developed had an improved rise time (shorter than 0.4 μs) when compared to a commercially available reference sensor.

  12. Superstructures of chiral nematic microspheres as all-optical switchable distributors of light

    PubMed Central

    Aβhoff, Sarah J.; Sukas, Sertan; Yamaguchi, Tadatsugu; Hommersom, Catharina A.; Le Gac, Séverine; Katsonis, Nathalie

    2015-01-01

    Light technology is based on generating, detecting and controlling the wavelength, polarization and direction of light. Emerging applications range from electronics and telecommunication to health, defence and security. In particular, data transmission and communication technologies are currently asking for increasingly complex and fast devices, and therefore there is a growing interest in materials that can be used to transmit light and also to control the distribution of light in space and time. Here, we design chiral nematic microspheres whose shape enables them to reflect light of different wavelengths and handedness in all directions. Assembled in organized hexagonal superstructures, these microspheres of well-defined sizes communicate optically with high selectivity for the colour and chirality of light. Importantly, when the microspheres are doped with photo-responsive molecular switches, their chiroptical communication can be tuned, both gradually in wavelength and reversibly in polarization. Since the kinetics of the “on” and “off” switching can be adjusted by molecular engineering of the dopants and because the photonic cross-communication is selective with respect to the chirality of the incoming light, these photo-responsive microspheres show potential for chiroptical all-optical distributors and switches, in which wavelength, chirality and direction of the reflected light can be controlled independently and reversibly. PMID:26400584

  13. Gold nanoparticle-assisted all optical localized stimulation and monitoring of Ca2+ signaling in neurons

    PubMed Central

    Lavoie-Cardinal, Flavie; Salesse, Charleen; Bergeron, Éric; Meunier, Michel; De Koninck, Paul

    2016-01-01

    Light-assisted manipulation of cells to control membrane activity or intracellular signaling has become a major avenue in life sciences. However, the ability to perform subcellular light stimulation to investigate localized signaling has been limited. Here, we introduce an all optical method for the stimulation and the monitoring of localized Ca2+ signaling in neurons that takes advantage of plasmonic excitation of gold nanoparticles (AuNPs). We show with confocal microscopy that 800 nm laser pulse application onto a neuron decorated with a few AuNPs triggers a transient increase in free Ca2+, measured optically with GCaMP6s. We show that action potentials, measured electrophysiologically, can be induced with this approach. We demonstrate activation of local Ca2+ transients and Ca2+ signaling via CaMKII in dendritic domains, by illuminating a single or few functionalized AuNPs specifically targeting genetically-modified neurons. This NP-Assisted Localized Optical Stimulation (NALOS) provides a new complement to light-dependent methods for controlling neuronal activity and cell signaling. PMID:26857748

  14. All-optical modulation in Mid-Wavelength Infrared using porous Si membranes.

    PubMed

    Park, Sung Jin; Zakar, Ammar; Zerova, Vera L; Chekulaev, Dimitri; Canham, Leigh T; Kaplan, Andre

    2016-01-01

    We demonstrate for the first time the possibility of all-optical modulation of self-standing porous Silicon (pSi) membrane in the Mid-Wavelength Infrared (MWIR) range using femtosecond pump-probe techniques. To study optical modulation, we used pulses of an 800 nm, 60 femtosecond for pump and a MWIR tunable probe in the spectral range between 3.5 and 4.4 μm. We show that pSi possesses a natural transparency window centred around 4 μm. Yet, about 55% of modulation contrast can be achieved by means of optical excitation at the pump power of 60 mW (4.8 mJ/cm(2)). Our analysis shows that the main mechanism of the modulation is interaction of the MWIR signal with the free charge carrier excited by the pump. The time-resolved measurements showed a sub-picosecond rise time and a recovery time of about 66 ps, which suggests a modulation speed performance of ~15 GHz. This optical modulation of pSi membrane in MWIR can be applied to a variety of applications such as thermal imaging and free space communications. PMID:27440224

  15. All optical fiber combined-imaging system of photoacoustic and optical coherence tomography

    NASA Astrophysics Data System (ADS)

    Eom, Jonghyun; Shin, Jun Geun; Park, Soongho; Lee, Byeong Ha

    2016-03-01

    We present an all optical fiber combined-imaging system that integrates non-contact photoacoustic tomography (NPAT) and optical coherence tomography (OCT) to simultaneously provide PA and OCT images. The fiber-based PAT system utilizing a Mach-Zehnder interferometer with a fiber laser of 1550 nm measures the photoacoustic signal at the sample surface. For the generation of a PA signal, a pulse train from a bulk type Nd:YAG laser illuminates the sample via a large core multimode optical fiber. The fiber-based OCT operating at a center wavelength of 1310 nm allowed is combined with the fiber-based PAT system by sharing the same optical fiber probe. The two lights from the fiber laser and the OCT source are guided into the probe through each port of a 2 by 2 optical fiber coupler. The back-reflected lights from the sample are guided to respective imaging systems by the same coupler. With these both NPAT and OCT images could be co-registered without physical contact with the sample. To demonstrate the feasibility of the proposed system, a phantom experiment has been carried out with a phantom composed of a black PET fiber and a fishing wire. The proposed all fiber-optic combined-imaging system has the potential for minimally invasive and improved diagnosis.

  16. Electromagnetically induced transparency in a diamond spin ensemble enables all-optical electromagnetic field sensing.

    PubMed

    Acosta, V M; Jensen, K; Santori, C; Budker, D; Beausoleil, R G

    2013-05-24

    We use electromagnetically induced transparency (EIT) to probe the narrow electron-spin resonance of nitrogen-vacancy centers in diamond. Working with a multipass diamond chip at temperatures 6-30 K, the zero-phonon absorption line (637 nm) exhibits an optical depth of 6 and inhomogeneous linewidth of ~30 GHz FWHM. Simultaneous optical excitation at two frequencies separated by the ground-state zero-field splitting (2.88 GHz) reveals EIT resonances with a contrast exceeding 6% and FWHM down to 0.4 MHz. The resonances provide an all-optical probe of external electric and magnetic fields with a projected photon-shot-noise-limited sensitivity of 0.2 V/cm/√[Hz] and 0.1 nT/√[Hz], respectively. Operation of a prototype diamond-EIT magnetometer measures a noise floor of ~/<1 nT/√[Hz] for frequencies above 10 Hz and Allan deviation of 1.3±1.1 nT for 100 s intervals. The results demonstrate the potential of diamond-EIT devices for applications ranging from quantum-optical memory to precision measurement and tests of fundamental physics. PMID:23745875

  17. Power and length requirements for all-optical switching in semiconductor-doped glass waveguides

    NASA Astrophysics Data System (ADS)

    Mayweather, Derek T.; Digonnet, Michel J. F.; Pantell, Richard H.; Shaw, H. J.

    1994-10-01

    We present a theoretical model that computes the nonlinear index (n2) of semiconductor- doped glasses (SDG), based on the material's properties, and predicts the power and length requirements, as well as the optimum operating wavelengths, for an all-optical SDG waveguide switch. The main conclusions are that (1) n2 depends strongly on pump intensity, which partly explains the large disparity in reported values of n2, (2) the pump and signal wavelengths should be in specific and different ranges to minimize switching power and signal loss, (3) for CdSSe- and CdTe-doped glasses, n2 is relatively small, and the switching power requirement for these two SDGs is consequently quite high (2 - 16 W). We provide evidence that this weak nonlinearity, compared to that of similar semiconductors in bulk, is due to the strong nonradiative recombination of carriers arising from the small size of the semiconductor microcrystallites. Projections indicate that the switching power would be reduced by up to three orders of magnitude by increasing the microcrystallite size, thus producing a slower (ns) but more power-efficient switch.

  18. A matrix based on germanium/ormosil system for all-optical applications

    NASA Astrophysics Data System (ADS)

    Gao, Tianxi; Que, Wenxiu; Wang, Yushu

    2016-05-01

    Germania/ormosil hybrid matrix with large third-order nonlinearity is prepared by a low-temperature sol-gel process. Z-scan measurements indicate that the film fabricated from the pure Germania/ormosil hybrid solution shows an excellent third-order nonlinearity at all measured wavelengths. In order to explore its potential to be a functional matrix, a well-investigated organic dopant disperse red 1 (DR1) azoaromatic chromophore is introduced into the Germania/ormosil system. As a comparison, the poly(methyl methacrylate) (PMMA) polymer is employed and doped with the same content of DR1 molecule. Results indicate that by employing Germania/ormosil matrix system, the figure of merit of DR1-doped material at 532 nm can be greatly improved as compared to that of the PMMA/DR1 polymer film and also other published reports. This improvement helps broaden the limited applications of DR1-doped material and make it acceptable for devices fabrication at 532 nm. Results demonstrate that the as-prepared hybrid matrix might be a promising candidate for all-optical applications.

  19. All-optical modulation in Mid-Wavelength Infrared using porous Si membranes

    PubMed Central

    Park, Sung Jin; Zakar, Ammar; Zerova, Vera L.; Chekulaev, Dimitri; Canham, Leigh T.; Kaplan, Andre

    2016-01-01

    We demonstrate for the first time the possibility of all-optical modulation of self-standing porous Silicon (pSi) membrane in the Mid-Wavelength Infrared (MWIR) range using femtosecond pump-probe techniques. To study optical modulation, we used pulses of an 800 nm, 60 femtosecond for pump and a MWIR tunable probe in the spectral range between 3.5 and 4.4 μm. We show that pSi possesses a natural transparency window centred around 4 μm. Yet, about 55% of modulation contrast can be achieved by means of optical excitation at the pump power of 60 mW (4.8 mJ/cm2). Our analysis shows that the main mechanism of the modulation is interaction of the MWIR signal with the free charge carrier excited by the pump. The time-resolved measurements showed a sub-picosecond rise time and a recovery time of about 66 ps, which suggests a modulation speed performance of ~15 GHz. This optical modulation of pSi membrane in MWIR can be applied to a variety of applications such as thermal imaging and free space communications. PMID:27440224

  20. Simultaneous all-optical manipulation and recording of neural circuit activity with cellular resolution in vivo

    PubMed Central

    Packer, Adam M.; Russell, Lloyd E.; Dalgleish, Henry W.P.; Häusser, Michael

    2016-01-01

    We describe an all-optical strategy for simultaneously manipulating and recording the activity of multiple neurons with cellular resolution in vivo. Concurrent two-photon optogenetic activation and calcium imaging is enabled by coexpression of a red-shifted opsin and a genetically encoded calcium indicator. A spatial light modulator allows tens of user-selected neurons to be targeted for spatiotemporally precise optogenetic activation, while simultaneous fast calcium imaging provides high-resolution network-wide readout of the manipulation with negligible optical crosstalk. Proof-of-principle experiments in mouse barrel cortex demonstrate interrogation of the same neuronal population during different behavioral states, and targeting of neuronal ensembles based on their functional signature. This approach extends the optogenetic toolkit beyond the specificity obtained with genetic or viral approaches, enabling high-throughput, flexible and long-term optical interrogation of functionally defined neural circuits with single-cell and single-spike resolution in the mammalian brain in vivo. PMID:25532138

  1. Imaging and detection of early stage dental caries with an all-optical photoacoustic microscope

    NASA Astrophysics Data System (ADS)

    Hughes, D. A.; Sampathkumar, A.; Longbottom, C.; Kirk, K. J.

    2015-01-01

    Tooth decay, at its earliest stages, manifests itself as small, white, subsurface lesions in the enamel. Current methods for detection in the dental clinic are visual and tactile investigations, and bite-wing X-ray radiographs. These techniques suffer from poor sensitivity and specificity at the earliest (and reversible) stages of the disease due to the small size (<100μm) of the lesion. A fine-resolution (600 nm) ultra-broadband (200 MHz) all-optical photoacoustic microscopy system was is used to image the early signs of tooth decay. Ex-vivo tooth samples exhibiting white spot lesions were scanned and were found to generate a larger (one order of magnitude) photoacoustic (PA) signal in the lesion regions compared to healthy enamel. The high contrast in the PA images potentially allows lesions to be imaged and measured at a much earlier stage than current clinical techniques allow. PA images were cross referenced with histology photographs to validate our experimental results. Our PA system provides a noncontact method for early detection of white-spot lesions with a high detection bandwidth that offers advantages over previously demonstrated ultrasound methods. The technique provides the sensing depth of an ultrasound system, but with the spatial resolution of an optical system.

  2. All-Optical Quasi-Phase Matching of Frequency Doubling Using Counterpropagating Light

    NASA Astrophysics Data System (ADS)

    Camuccio, Richard; Myer, Rachel; Penfield, Allison; Gagnon, Etienne; Lytle, Amy

    Nonlinear optical frequency conversion is a useful method for creating coherent light sources with unique capabilities. The main challenge for conversion efficiency of processes like frequency doubling is the chromatic dispersion of the nonlinear medium. Successful techniques for correcting the phase mismatch between the different frequencies are often limited by the type of nonlinear medium that may be used. An all-optical method of quasi-phase matching using counterpropagating light has recently been demonstrated for high-order harmonic generation, an extreme nonlinear process. Sequences of counterpropagating pulses are used to interfere with the harmonic generation process periodically, correcting the phase mismatch and boosting efficiency. We report progress on an experimental investigation of the effect of counterpropagating light on the more commonly used low-order nonlinear optical processes. We present data showing the effects of a single counterpropagating pulse on the efficiency of frequency doubling of a Ti:sapphire ultrafast laser oscillator in beta-Barium Borate. Research Corporation for Science Advancement (RCSA), Cottrell College Science Award #21084; Franklin & Marshall Hackman Summer Scholars Program.

  3. Continuous all-optical deceleration and single-photon cooling of molecular beams

    NASA Astrophysics Data System (ADS)

    Jayich, A. M.; Vutha, A. C.; Hummon, M. T.; Porto, J. V.; Campbell, W. C.

    2014-02-01

    Ultracold molecular gases are promising as an avenue to rich many-body physics, quantum chemistry, quantum information, and precision measurements. This richness, which flows from the complex internal structure of molecules, makes the creation of ultracold molecular gases using traditional methods (laser plus evaporative cooling) a challenge, in particular due to the spontaneous decay of molecules into dark states. We propose a way to circumvent this key bottleneck using an all-optical method for decelerating molecules using stimulated absorption and emission with a single ultrafast laser. We further describe single-photon cooling of the decelerating molecules that exploits their high dark state pumping rates, turning the principal obstacle to molecular laser cooling into an advantage. Cooling and deceleration may be applied simultaneously and continuously to load molecules into a trap. We discuss implementation details including multilevel numerical simulations of strontium monohydride. These techniques are applicable to a large number of molecular species and atoms with the only requirement being an electric dipole transition that can be accessed with an ultrafast laser.

  4. An all-optical Compton source for single-exposure x-ray imaging

    NASA Astrophysics Data System (ADS)

    Döpp, A.; Guillaume, E.; Thaury, C.; Gautier, J.; Andriyash, I.; Lifschitz, A.; Malka, V.; Rousse, A.; Phuoc, K. Ta

    2016-03-01

    All-optical Compton sources are innovative, compact devices to produce high energy femtosecond x-rays. Here we present results on a single-pulse scheme that uses a plasma mirror to reflect the drive beam of a laser plasma accelerator and to make it collide with the highly-relativistic electrons in its wake. The accelerator is operated in the self-injection regime, producing quasi-monoenergetic electron beams of around 150 MeV peak energy. Scattering with the intense femtosecond laser pulse leads to the emission of a collimated high energy photon beam. Using continuum-attenuation filters we measure significant signal content beyond 100 keV and with simulations we estimate a peak photon energy of around 500 keV. The source divergence is about 13 mrad and the pointing stability is 7 mrad. We demonstrate that the photon yield from the source is sufficiently high to illuminate a centimeter-size sample placed 90 centimeters behind the source, thus obtaining radiographs in a single shot.

  5. Superstructures of chiral nematic microspheres as all-optical switchable distributors of light

    NASA Astrophysics Data System (ADS)

    Aβhoff, Sarah J.; Sukas, Sertan; Yamaguchi, Tadatsugu; Hommersom, Catharina A.; Le Gac, Séverine; Katsonis, Nathalie

    2015-09-01

    Light technology is based on generating, detecting and controlling the wavelength, polarization and direction of light. Emerging applications range from electronics and telecommunication to health, defence and security. In particular, data transmission and communication technologies are currently asking for increasingly complex and fast devices, and therefore there is a growing interest in materials that can be used to transmit light and also to control the distribution of light in space and time. Here, we design chiral nematic microspheres whose shape enables them to reflect light of different wavelengths and handedness in all directions. Assembled in organized hexagonal superstructures, these microspheres of well-defined sizes communicate optically with high selectivity for the colour and chirality of light. Importantly, when the microspheres are doped with photo-responsive molecular switches, their chiroptical communication can be tuned, both gradually in wavelength and reversibly in polarization. Since the kinetics of the “on” and “off” switching can be adjusted by molecular engineering of the dopants and because the photonic cross-communication is selective with respect to the chirality of the incoming light, these photo-responsive microspheres show potential for chiroptical all-optical distributors and switches, in which wavelength, chirality and direction of the reflected light can be controlled independently and reversibly.

  6. Carrier transport in an InGaAs(P)/InP all-optical switching structure

    SciTech Connect

    Knorr, C.; Wilhelm, U.; Ottenwaelder, D.; Scholz, F.; Hangleiter, A.

    1996-12-31

    All-optical switches play a central role in optical computing and optical data processing. SEEDs (self electro-optic effect devices) are one class of devices, which work at low optical power, but need an external electrical feedback. The authors presented a specially designed SCMQW structure, where hole transport is controlled by an additional large heterobarrier. This barrier gives access to steady state escape times by measuring the charge carrier induced field change in the MWQ region. The authors get a minimum value for the hole extraction time over the barrier of several {micro}s at 77 K. At a temperature of 200 K the measured time constants lie below the values, which their rate equation model and the semi-classical model predict, and show a stronger field dependence. This could be accounted for thermally assisted tunneling and contribution of light hole transport, which both reduce the effective barrier height and show a stronger field dependence. Further investigations of the transport times are currently in progress by changing the thickness of the InP barrier and the barrier height of the quaternary material.

  7. Network connectivity enhancement by exploiting all optical multicast in semiconductor ring laser

    NASA Astrophysics Data System (ADS)

    Siraj, M.; Memon, M. I.; Shoaib, M.; Alshebeili, S.

    2015-03-01

    The use of smart phone and tablet applications will provide the troops for executing, controlling and analyzing sophisticated operations with the commanders providing crucial documents directly to troops wherever and whenever needed. Wireless mesh networks (WMNs) is a cutting edge networking technology which is capable of supporting Joint Tactical radio System (JTRS).WMNs are capable of providing the much needed bandwidth for applications like hand held radios and communication for airborne and ground vehicles. Routing management tasks can be efficiently handled through WMNs through a central command control center. As the spectrum space is congested, cognitive radios are a much welcome technology that will provide much needed bandwidth. They can self-configure themselves, can adapt themselves to the user requirement, provide dynamic spectrum access for minimizing interference and also deliver optimal power output. Sometimes in the indoor environment, there are poor signal issues and reduced coverage. In this paper, a solution utilizing (CR WMNs) over optical network is presented by creating nanocells (PCs) inside the indoor environment. The phenomenon of four-wave mixing (FWM) is exploited to generate all-optical multicast using semiconductor ring laser (SRL). As a result same signal is transmitted at different wavelengths. Every PC is assigned a unique wavelength. By using CR technology in conjunction with PC will not only solve network coverage issue but will provide a good bandwidth to the secondary users.

  8. All-Optical dc Nanotesla Magnetometry Using Silicon Vacancy Fine Structure in Isotopically Purified Silicon Carbide

    NASA Astrophysics Data System (ADS)

    Simin, D.; Soltamov, V. A.; Poshakinskiy, A. V.; Anisimov, A. N.; Babunts, R. A.; Tolmachev, D. O.; Mokhov, E. N.; Trupke, M.; Tarasenko, S. A.; Sperlich, A.; Baranov, P. G.; Dyakonov, V.; Astakhov, G. V.

    2016-07-01

    We uncover the fine structure of a silicon vacancy in isotopically purified silicon carbide (4H-28SiC) and reveal not yet considered terms in the spin Hamiltonian, originated from the trigonal pyramidal symmetry of this spin-3 /2 color center. These terms give rise to additional spin transitions, which would be otherwise forbidden, and lead to a level anticrossing in an external magnetic field. We observe a sharp variation of the photoluminescence intensity in the vicinity of this level anticrossing, which can be used for a purely all-optical sensing of the magnetic field. We achieve dc magnetic field sensitivity better than 100 nT /√{Hz } within a volume of 3 ×10-7m m3 at room temperature and demonstrate that this contactless method is robust at high temperatures up to at least 500 K. As our approach does not require application of radio-frequency fields, it is scalable to much larger volumes. For an optimized light-trapping waveguide of 3 mm3 , the projection noise limit is below 100 fT /√{Hz } .

  9. The logic of deterrence

    SciTech Connect

    Kenny, A.

    1985-01-01

    In The Logic of Deterrence, Kenny presents a guide to the theory and ethics of the complicated subject of deterrence. Kenny begins by examining the necessary conditions for any war to be just and then applies these principles to the cases of limited and total nuclear war. He then critiques current deterrence policies of both East and West, concluding that they are based on a willingness to kill millions of innocent people and are morally wrong. In the final section of the book, Kenny offers proposals for nuclear disarmament. Charting a course ''between the illusory hopes of the multilateralists who seek disarmament by negotiating and the impractical idealism of those who call for immediate and total unilateral disarmament by the West,'' Kenny proposes a series of phased and partial unilateral steps by the West, coupled with pressure on the East to reciprocate.

  10. High efficiency 160 Gb/s all-optical wavelength converter based on terahertz optical asymmetric demultiplexer with quantum dot semiconductor optical amplifier

    NASA Astrophysics Data System (ADS)

    Han, Huining; Zhang, Fangdi; Yang, Wei; Cai, Libo; Zhang, Min; Ye, Peida

    2007-11-01

    Proposed in this paper is a high efficient 160Gb/s all-optical wavelength converter based on terahertz optical asymmetric demultiplexer with quantum dot Semiconductor optical amplifier (QDSOA -TOAD). The performance of the wavelength converter under various operating conditions, such as different injected current densities, input pulse widths and input control pulse energies, is analyzed in terms of contrast ratio (CR) through numerical simulations. With the properly chosen parameters, a wavelength-converted signal with CR over 19.48 can be obtained.

  11. Multimodal photoacoustic and optical coherence tomography scanner using an all optical detection scheme for 3D morphological skin imaging

    PubMed Central

    Zhang, Edward Z.; Povazay, Boris; Laufer, Jan; Alex, Aneesh; Hofer, Bernd; Pedley, Barbara; Glittenberg, Carl; Treeby, Bradley; Cox, Ben; Beard, Paul; Drexler, Wolfgang

    2011-01-01

    A noninvasive, multimodal photoacoustic and optical coherence tomography (PAT/OCT) scanner for three-dimensional in vivo (3D) skin imaging is described. The system employs an integrated, all optical detection scheme for both modalities in backward mode utilizing a shared 2D optical scanner with a field-of-view of ~13 × 13 mm2. The photoacoustic waves were detected using a Fabry Perot polymer film ultrasound sensor placed on the surface of the skin. The sensor is transparent in the spectral range 590-1200 nm. This permits the photoacoustic excitation beam (670-680 nm) and the OCT probe beam (1050 nm) to be transmitted through the sensor head and into the underlying tissue thus providing a backward mode imaging configuration. The respective OCT and PAT axial resolutions were 8 and 20 µm and the lateral resolutions were 18 and 50-100 µm. The system provides greater penetration depth than previous combined PA/OCT devices due to the longer wavelength of the OCT beam (1050 nm rather than 829-870 nm) and by operating in the tomographic rather than the optical resolution mode of photoacoustic imaging. Three-dimensional in vivo images of the vasculature and the surrounding tissue micro-morphology in murine and human skin were acquired. These studies demonstrated the complementary contrast and tissue information provided by each modality for high-resolution 3D imaging of vascular structures to depths of up to 5 mm. Potential applications include characterizing skin conditions such as tumors, vascular lesions, soft tissue damage such as burns and wounds, inflammatory conditions such as dermatitis and other superficial tissue abnormalities. PMID:21833358

  12. Silicon Photonics: All-Optical Devices for Linear and Nonlinear Applications

    NASA Astrophysics Data System (ADS)

    Driscoll, Jeffrey B.

    are shown to contribute no time-averaged momentum. Furthermore, the vectoral modal components, in conjunction with the tensoral nature of the third-order susceptibility of Si, lead to nonlinear properties which are dependent on waveguide orientation with respect to the Si parent crystal and the construction of the modal electric field components. This consideration is used to maximize effective nonlinearity and realize nonlinear Kerr gratings along specific waveguide trajectories. Tight optical confinement leads to a natural enhancement of the intrinsically large effective nonlinearty of Si waveguides, and in fact, the effective nonlinearty can be made to be almost 106 times greater in Si waveguides than that of standard single-mode fiber. Such a large nonlinearity motivates chip-scale all-optical signal processing techniques. Wavelength conversion by both four-wave-mixing (FWM) and cross-phase-modulation (XPM) will be discussed, including a technique that allows for enhanced broadband discrete FWM over arbitrary spectral spans by modulating both the linear and nonlinear waveguide properties through periodic changes in waveguide geometry. This quasi-phase-matching approach has very real applications towards connecting mature telecom sources detectors and components to other spectral regimes, including the mid-IR. Other signal processing techniques such as all-optical modulation format conversion via XPM will also be discussed. This thesis will conclude by looking at ways to extend the bandwidth capacity of Si waveguide interconnects on chip. As the number of processing cores continues to scale as a means for computational performance gains, on-chip link capacity will become an increasingly important issue. Metallic traces have severe limitations and are envisioned to eventually bow to integrated photonic links. The aggregate bandwidth supported by a single waveguide link will therefore become a crucial consideration as integrated photonics approaches the CPU. One way

  13. State of the Art of the all-Optical Radiocarbon Detection (Invited)

    NASA Astrophysics Data System (ADS)

    Cancio Pastor, P.; Mazzotti, D.; Galli, I.; Giusfredi, G.; Bartalini, S.; Cappelli, F.; De Natale, P.

    2013-12-01

    Radiocarbon (14C), the 'natural clock' for dating organic matter, is a very elusive atom. Its present concentration is about one part per trillion. For the past 30 years, accelerator mass spectrometry (AMS) has been adopted as the standard method for detecting such carbon isotope at concentrations well below its natural abundance (3 parts per quadrillion). AMS requires a smaller carbon mass and shorter measurement times than the old standard method of liquid scintillation counting. However, AMS requires huge, expensive and high-maintenance experimental facilities. We have developed a laser spectroscopy technique that is sensitive enough to detect the radiocarbon dioxide molecules at very low concentrations with an all-optical setup that is orders of magnitude more compact and less expensive than AMS [1]. The optical spectroscopy approach is based in the detection of very weak absorption of IR laser light by a 14C-containing molecule as 14C-Carbon Dioxide. Spectroscopic techniques as Cavity Ring Down (CRD) spectroscopy that uses the kilometric absorption paths provided by high-Finesse Fabry-Perot cavities have revolutionized the trace gas detection of molecular species in terms of ultimate sensitivity. Nevertheless CRD has been not capable to detect very elusive molecules as radiocarbon Dioxide. The new developed technique, named SCAR (saturated-absorption cavity ring-down), makes use of molecular absorption saturation to enhance resolution and sensitivity with respect to conventional CRD [2]. By combining SCAR with a frequency-comb-linked CW coherent source, which delivers tunable radiation (around 4.5-μm wavelength) [3], we could set an unprecedented limit in trace gas detection, accessing the part-per-quadrillion concentration range. Comparison between AMS and SCAR techniques to detect 14C by measuring the same carbon samples shows SCAR-based results are currently one order of magnitude shy of challenging AMS, but there is still room for improvement [4

  14. All-Optical Blister Test of Suspended Graphene Using Micro-Raman Spectroscopy

    NASA Astrophysics Data System (ADS)

    Metten, Dominik; Federspiel, François; Romeo, Michelangelo; Berciaud, Stéphane

    2014-11-01

    We report a comprehensive micro-Raman study of a pressurized suspended graphene membrane that hermetically seals a circular pit, etched in a Si /SiO2 substrate. Placing the sample under a uniform pressure load results in bulging of the graphene membrane and subsequent softening of the main Raman features, due to tensile strain. In such a microcavity, the intensity of the Raman features depends very sensitively on the distance between the graphene membrane and the Si substrate, which acts as the bottom mirror of the cavity. Thus, a spatially resolved analysis of the intensity of the G - and 2 D -mode features as a function of the pressure load permits a direct reconstruction of the blister profile. An average strain is then deduced at each pressure load, and Grüneisen parameters of 1.8 ±0.2 and 2.4 ±0.2 are determined for the Raman G and 2 D modes, respectively. In addition, the measured blister height is proportional to the cubic root of the pressure load, as predicted theoretically. The validation of this scaling provides a direct and accurate determination of the Young's modulus of graphene with a purely optical, hence contactless and minimally invasive, approach. We find a Young's modulus of (1.05 ±0.10 ) TPa for monolayer graphene, in a perfect match with previous nanoindentation measurements. This all-optical methodology opens avenues for pressure sensing using graphene and could readily be adapted to other emerging two-dimensional materials and to nanoresonators.

  15. Novel all-optical planar and compact minimum-stage switches of size >= 4x4

    NASA Astrophysics Data System (ADS)

    Giglmayr, Josef

    1997-01-01

    Throughout the paper, novel all-optical planar 1-stage k multiplied by k-switches and compact minimum-stage k multiplied by k-switches in double-layer and multi-layer technique, are presented and analyzed. In the first case, the number of k(k - 1)/2 switches of size 2 multiplied by 2 (equivalent minimum of the Spanke-Benes network) are arranged in parallel instead of the number of k (equivalent maximum) cascaded 2 multiplied by 2-switches of the Spanke- Benes network. In the second case, the number of 2 multiplied by 2-switches depends on the geometry of the 'pipes' of the switches formed by the layers and waveguides [for a square it is 3k/2(k/2 - 1) for rearrangeable nonblocking and 3(k - 1)k/2(k/2 - 1) for circuit switching networks]. The number of stages (NS) (horizontal cascaded) of the proposed compact switches for the nonblocking interconnection is NS equals n - 1 if the waveguides form an n-gon (n greater than or equal to 3) for any size of the k multiplied by k-switch. In this way, the attenuation of optical signals passing through a photonic network may be minimized. In particular, for any size of a k multiplied by k-switch, dependent on the n-gon, the minimum NS is n-1 equals 2 (triangle) or n - 1 equals 3 (square) etc. Thus the proposed switch concept is of complexity O(1), i.e. the NS is independent of the number of inputs/outputs. Additionally, the proposed switches are capable to operate in the circuit switching mode if and only if (iff) the parallelism increases by the factor k-1.

  16. All-optical polarization control and noise cleaning based on a nonlinear lossless polarizer

    NASA Astrophysics Data System (ADS)

    Barozzi, Matteo; Vannucci, Armando; Picchi, Giorgio

    2015-01-01

    We propose an all-optical fiber-based device able to accomplish both polarization control and OSNR enhancement of an amplitude modulated optical signal, affected by unpolarized additive white Gaussian noise, at the same time. The proposed noise cleaning device is made of a nonlinear lossless polarizer (NLP), that performs polarization control, followed by an ideal polarizing filter that removes the orthogonally polarized half of additive noise. The NLP transforms every input signal polarization into a unique, well defined output polarization (without any loss of signal energy) and its task is to impose a signal polarization aligned with the transparent eigenstate of the polarizing filter. In order to effectively control the polarization of the modulated signal, we show that two different NLP configurations (with counter- or co-propagating pump laser) are needed, as a function of the signal polarization coherence time. The NLP is designed so that polarization attraction is effective only on the "noiseless" (i.e., information-bearing) component of the signal and not on noise, that remains unpolarized at the NLP output. Hence, the proposed device is able to discriminate signal power (that is preserved) from in-band noise power (that is partly suppressed). Since signal repolarization is detrimental if applied to polarization-multiplexed formats, the noise cleaner application is limited here to "legacy" links, with 10 Gb/s OOK modulation, still representing the most common format in deployed networks. By employing the appropriate NLP configurations, we obtain an OSNR gain close to 3dB. Furthermore, we show how the achievable OSNR gain can be estimated theoretically.

  17. All-optical control of cardiac excitation: combined high-resolution optogenetic actuation and optical mapping.

    PubMed

    Entcheva, Emilia; Bub, Gil

    2016-05-01

    Cardiac tissue is an excitable system that can support complex spatiotemporal dynamics, including instabilities (arrhythmias) with lethal consequences. While over the last two decades optical mapping of excitation (voltage and calcium dynamics) has facilitated the detailed characterization of such arrhythmia events, until recently, no precise tools existed to actively interrogate cardiac dynamics in space and time. In this work, we discuss the combined use of new methods for space- and time-resolved optogenetic actuation and simultaneous fast, high resolution optical imaging of cardiac excitation waves. First, the mechanisms, limitations and unique features of optically induced responses in cardiomyocytes are outlined. These include the ability to bidirectionally control the membrane potential using depolarizing and hyperpolarizing opsins; the ability to induce prolonged sustained voltage changes; and the ability to control refractoriness and the shape of the cardiac action potential. At the syncytial tissue level, we discuss optogenetically enabled experimentation on cell-cell coupling, alteration of conduction properties and termination of propagating waves by light. Specific attention is given to space- and time-resolved application of optical stimulation using dynamic light patterns to perturb ongoing activation and to probe electrophysiological properties at desired tissue locations. The combined use of optical methods to perturb and to observe the system can offer new tools for precise feedback control of cardiac electrical activity, not available previously with pharmacological and electrical stimulation. These new experimental tools for all-optical electrophysiology allow for a level of precise manipulation and quantification of cardiac dynamics comparable in robustness to the computational setting, and can provide new insights into pacemaking, arrhythmogenesis and suppression or cardioversion. PMID:26857427

  18. All-optical photoacoustic imaging and detection of early-stage dental caries

    NASA Astrophysics Data System (ADS)

    Sampathkumar, Ashwin; Hughes, David A.; Longbottom, Chris; Kirk, Katherine J.

    2015-02-01

    Dental caries remain one of the most common oral diseases in the world. Current detection methods, such as dental explorer and X-ray radiography, suffer from poor sensitivity and specificity at the earliest (and reversible) stages of the disease because of the small size (< 100 microns) of early-stage lesions. We have developed a fine-resolution (480 nm), ultra-broadband (1 GHz), all-optical photoacoustic imaging (AOPAI) system to image and detect early stages of tooth decay. This AOPAI system provides a non-contact, non-invasive and non-ionizing means of detecting early-stage dental caries. Ex-vivo teeth exhibiting early-stage, white-spot lesions were imaged using AOPAI. Experimental scans targeted each early-stage lesion and a reference healthy enamel region. Photoacoustic (PA) signals were generated in the tooth using a 532-nm pulsed laser and the light-induced broadband ultrasound signal was detected at the surface of the tooth with an optical path-stabilized Michelson interferometer operating at 532 nm. The measured time-domain signal was spatially resolved and back-projected to form 2D and 3D maps of the lesion using k-wave reconstruction methods. Experimental data collected from areas of healthy and diseased enamel indicate that the lesion generated a larger PA response compared to healthy enamel. The PA-signal amplitude alone was able to detect a lesion on the surface of the tooth. However, time- reversal reconstructions of the PA scans also quantitatively depicted the depth of the lesion. 3D PA reconstruction of the diseased tooth indicated a sub-surface lesion at a depth of 0.6 mm, in addition to the surface lesion. These results suggest that our AOPAI system is well suited for rapid clinical assessment of early-stage dental caries. An overview of the AOPAI system, fine-resolution PA and histology results of diseased and healthy teeth will be presented.

  19. All-optical quality-of-signal monitoring in real time

    NASA Astrophysics Data System (ADS)

    Anderson, Betty Lise; Abou-Galala, Feras; Rabb, David; Durresi, Arjan

    2003-08-01

    An new optical correlator containing a tapped delay line with thousands of taps is described. This enables ultra-high resolution correlation. We apply this to monitoring quality-of-signal by correlating the received, degraded bits with and un-degraded signal. The strength of the correlation signal, which is all optical, is proportional to the quality. Dispersion and attenuation can be evaluated in less than 100 ps at 40Gb/s, and jitter and noise in less than 100 ns. This is a significant improvement over minutes or even hours for bit-error-rate measurements. Simulations show good correspondence to eye-diagram measurements, the conventional (but slow) way to measure signal quality. If a network node can know the quality of all its links in real-time, it can re-route signals around poor links, and provide restoration and protection as well. The key to all this is an optical correlator with a very large number of taps in its internal tapped delay line. Our device uses a White cell and a fixed micro-mirror array. In a White cell, light bounces back and forth between three spherical mirrors. Multiple beams circulate in the same cell without interfering and are each refocused to a unique pattern of spots. We make the spots land on the micro-mirror array to switch between cells of slightly different lengths. Our current design provides 6550 possible delays for thousands of light beams, using only ten mirrors, a lens, and the micro-mirror array. We have developed two routing and protection protocols to exploit having this real-time information available to the network.

  20. Study of the Performance of an All-Optical Half-Adder Based on Three-Core Non-Linear Directional Fiber Coupler Under Delayed and Instantaneous Non-Linear Kerr Responses

    NASA Astrophysics Data System (ADS)

    Menezes, J. W. M.; Fraga, W. B.; Lima, F. T.; Guimarães, G. F.; Ferreira, A. C.; Lyra, M. L.; Sombra, A. S. B.

    2011-06-01

    Recently, much attention has been given to the influence of the relaxation process of the non-linear response, because the usual assumption of instantaneous non-linear response fails for ultra-short pulses, and additional contributions coming from non-linear dispersion and delayed non-linearity have to be taken into account. This article presents a numerical analysis of the symmetric planar and asymmetric planar three-core non-linear directional fiber couplers operating with a soliton pulse, where effects of both delayed and instantaneous non-linear Kerr responses are analyzed for implementation of an all-optical half-adder. To implement this all-optical half-adder, eight configurations were analyzed for the non-linear directional fiber coupler, with two symmetric and six asymmetric configurations. The half-adder is the key building block for many digital processing functions, such as shift register, binary counter, and serial parallel data converters. The optical coupler is an important component for applications in optical-fiber telecommunication systems and all integrated optical circuit because of its very high switching speeds. In this numerical simulation, the symmetric/asymmetric planar presents a structure with three cores in a parallel equidistant arrangement, three logical inputs, and two output energy. To prove the effectiveness of the theoretical model for generation of the all-optical half-adder, the best phase to be applied to the control pulse was sought, and a study was done of the extinction ratio level as a function of the Δ > parameter, the normalized time duration, and the Sum and Carry outputs of the (symmetric planar/asymmetric planar) non-linear directional fiber coupler. In this article, the interest is in transmission characteristics, extinction ratio level, normalized time duration, and pulse evolution along the non-linear directional fiber coupler. To compare the performance of the all-optical half-adders, the figure of merit of the

  1. Digital Holographic Logic

    NASA Technical Reports Server (NTRS)

    Preston, K., Jr.

    1972-01-01

    The characteristics of the holographic logic computer are discussed. The holographic operation is reviewed from the Fourier transform viewpoint, and the formation of holograms for use in performing digital logic are described. The operation of the computer with an experiment in which the binary identity function is calculated is discussed along with devices for achieving real-time performance. An application in pattern recognition using neighborhood logic is presented.

  2. Foundations of logic programming

    SciTech Connect

    Lloyd, J.W.

    1987-01-01

    This is the second edition of the first book to give an account of the mathematical foundations of Logic Programming. Its purpose is to collect the basic theoretical results of Logic Programming, which have previously only been available in widely scattered research papers. In addition to presenting the technical results, the book also contains many illustrative examples. Many of the examples and problems are part of the folklore of Logic Programming and are not easily obtainable elsewhere.

  3. Digital Microfluidic Logic Gates

    NASA Astrophysics Data System (ADS)

    Zhao, Yang; Xu, Tao; Chakrabarty, Krishnendu

    Microfluidic computing is an emerging application for microfluidics technology. We propose microfluidic logic gates based on digital microfluidics. Using the principle of electrowetting-on-dielectric, AND, OR, NOT and XOR gates are implemented through basic droplet-handling operations such as transporting, merging and splitting. The same input-output interpretation enables the cascading of gates to create nontrivial computing systems. We present a potential application for microfluidic logic gates by implementing microfluidic logic operations for on-chip HIV test.

  4. Ultrafast and bias-free all-optical wavelength conversion using III-V-on-silicon technology.

    PubMed

    Kumar, Rajesh; Spuesens, Thijs; Mechet, Pauline; Kumar, Pragati; Raz, Oded; Olivier, Nicolas; Fedeli, Jean-Marc; Roelkens, Gunther; Baets, Roel; Van Thourhout, Dries; Morthier, Geert

    2011-07-01

    Using a 7.5 μm diameter disk fabricated with III-V-on-silicon fabrication technology, we demonstrate bias-free all-optical wavelength conversion for non-return-to-zero on-off keyed pseudorandom bit sequence (PRBS) data at the speed of 10 Gbits/s with an extinction ratio of more than 12 dB. The working principle of such a wavelength converter is based on free-carrier-induced refractive index modulation in a pump-probe configuration. We believe it to be the first bias-free on-chip demonstration of all-optical wavelength conversion using PRBS data. All-optical gating measurements in the pump-probe configuration with the same device have revealed that it is possible to achieve wavelength conversion beyond 20 Gbits/s. PMID:21725441

  5. All-optical, polarization-insensitive light tuning properties in silver nanorod arrays covered with photoresponsive liquid crystals.

    PubMed

    Si, Guangyuan; Leong, Eunice S P; Jiang, Xiaoxiao; Lv, Jiangtao; Lin, Jiao; Dai, Haitao; Liu, Yan Jun

    2015-05-28

    Active plasmonics has been an interesting and important topic recently. Here we demonstrate the all-optical, polarization-insensitive tunable manipulation of a hybrid system that integrates a silver nanorod array with photoresponsive liquid crystals. The large-area plasmonic nanorod arrays are fabricated by laser interference lithography and ion milling. By covering a layer of photoresponsive liquid crystals, tunable control of plasmon resonance is achieved under an external light pump. The silver nanorod array also enables the homeotropic alignment of the liquid crystals, which makes the all-optical tuning behavior polarization-insensitive. With its advantages of cost-effective fabrication, easy integration, all-optical control, and polarization-insensitivity, the hybrid system could be valuable in many nanophotonic applications. PMID:25758775

  6. 25th anniversary article: Design of polymethine dyes for all-optical switching applications: guidance from theoretical and computational studies.

    PubMed

    Gieseking, Rebecca L; Mukhopadhyay, Sukrit; Risko, Chad; Marder, Seth R; Brédas, Jean-Luc

    2014-01-01

    All-optical switching--controlling light with light--has the potential to meet the ever-increasing demand for data transmission bandwidth. The development of organic π-conjugated molecular materials with the requisite properties for all-optical switching applications has long proven to be a significant challenge. However, recent advances demonstrate that polymethine dyes have the potential to meet the necessary requirements. In this review, we explore the theoretical underpinnings that guide the design of π-conjugated materials for all-optical switching applications. We underline, from a computational chemistry standpoint, the relationships among chemical structure, electronic structure, and optical properties that make polymethines such promising materials. PMID:24302357

  7. Electrically reconfigurable logic array

    NASA Technical Reports Server (NTRS)

    Agarwal, R. K.

    1982-01-01

    To compose the complicated systems using algorithmically specialized logic circuits or processors, one solution is to perform relational computations such as union, division and intersection directly on hardware. These relations can be pipelined efficiently on a network of processors having an array configuration. These processors can be designed and implemented with a few simple cells. In order to determine the state-of-the-art in Electrically Reconfigurable Logic Array (ERLA), a survey of the available programmable logic array (PLA) and the logic circuit elements used in such arrays was conducted. Based on this survey some recommendations are made for ERLA devices.

  8. Ferrite logic reliability study

    NASA Technical Reports Server (NTRS)

    Baer, J. A.; Clark, C. B.

    1973-01-01

    Development and use of digital circuits called all-magnetic logic are reported. In these circuits the magnetic elements and their windings comprise the active circuit devices in the logic portion of a system. The ferrite logic device belongs to the all-magnetic class of logic circuits. The FLO device is novel in that it makes use of a dual or bimaterial ferrite composition in one physical ceramic body. This bimaterial feature, coupled with its potential for relatively high speed operation, makes it attractive for high reliability applications. (Maximum speed of operation approximately 50 kHz.)

  9. Burst switching without guard interval in all-optical software-define star intra-data center network

    NASA Astrophysics Data System (ADS)

    Ji, Philip N.; Wang, Ting

    2014-02-01

    Optical switching has been introduced in intra-data center networks (DCNs) to increase capacity and to reduce power consumption. Recently we proposed a star MIMO OFDM-based all-optical DCN with burst switching and software-defined networking. Here, we introduce the control procedure for the star DCN in detail for the first time. The timing, signaling, and operation are described for each step to achieve efficient bandwidth resource utilization. Furthermore, the guidelines for the burst assembling period selection that allows burst switching without guard interval are discussed. The star all-optical DCN offers flexible and efficient control for next-generation data center application.

  10. Photonic-chip-based all-optical ultra-wideband pulse generation via XPM and birefringence in a chalcogenide waveguide.

    PubMed

    Tan, Kang; Marpaung, David; Pant, Ravi; Gao, Feng; Li, Enbang; Wang, Jian; Choi, Duk-Yong; Madden, Steve; Luther-Davies, Barry; Sun, Junqiang; Eggleton, Benjamin J

    2013-01-28

    We report a photonic-chip-based scheme for all-optical ultra-wideband (UWB) pulse generation using a novel all-optical differentiator that exploits cross-phase modulation and birefringence in an As₂S₃ chalcogenide rib waveguide. Polarity-switchable UWB monocycles and doublets were simultaneously obtained with single optical carrier operation. Moreover, transmission over 40-km fiber of the generated UWB doublets is demonstrated with good dispersion tolerance. These results indicate that the proposed approach has potential applications in multi-shape, multi-modulation and long-distance UWB-over-fiber communication systems. PMID:23389181

  11. Proposed new approach to design all optical AND gate using plasmonic based Mach-Zehnder interferometer for high speed communication

    NASA Astrophysics Data System (ADS)

    Kumar, Santosh; Singh, Lokendra

    2016-04-01

    The limitation of conventional electronics is mitigated by all optical integrated circuits which have potential of high speed computing and information processing. In this work, an all optical AND gate using optical Kerr effect and optical bistability of a plasmonic based Mach-Zehnder interferometer (MZI) is proposed. An MZI is capable for switching of light according to the intensities of optical input signal. The paper constitutes with mathematical formulation of device and its study is verified using finite difference time domain (FDTD) method.

  12. All-optical beam control with high speed using image-induced blazed gratings in coherent media

    SciTech Connect

    Zhao, L.; Duan Wenhui; Yelin, S. F.

    2010-07-15

    Based on the theory of electromagnetically induced transparency, we study the formation of all-optical blazed transmission gratings in a coherently driven three-level atomic system using intensity-modulated images in coupling fields. Also, we analyze the feasibility of high-speed (megahertz) modulation for the induced gratings by means of image-bearing flat-top pulse trains. Consequently, continuous-wave probe fields can be efficiently and rapidly deflected in free space. When more sophisticated images are adopted, our scheme can provide further possibilities of all-optical beam splitting and fanning.

  13. On the feasibility of full pattern-operated all-optical XOR gate with single semiconductor optical amplifier-based ultrafast nonlinear interferometer

    NASA Astrophysics Data System (ADS)

    Siarkos, T.; Zoiros, K. E.; Nastou, D.

    2009-07-01

    The possibility of implementing an ultrafast all-optical XOR gate using a single semiconductor optical amplifier (SOA)-based ultrafast nonlinear interferometer (UNI) is theoretically investigated and demonstrated. For this purpose a comprehensive model that characterizes the performance of a SOA when it is successively driven by two strong pseudorandom binary sequences is applied to simulate the specific module under dual rail switching mode of operation. In this manner an extensive set of curves is obtained allowing to analyze and evaluate the impact of the input data, SOA and interferometer critical parameters on the fully loaded Q-factor. Their thorough study and interpretation reveals that the satisfaction of their requirements in order to render acceptable this metric is feasible from a technological perspective and thus if their selection is made according to the extracted guidelines then pattern-free and error-free modulo-2 arithmetic can be straightforwardly realized at 20 Gb/s. This prediction can be of practical interest in simplifying and assisting the design of more sophisticated interconnections of enhanced combinatorial and sequential functionality in which the XOR gate is the core logical unit.

  14. All-Optical Micro Motors Based on Moving Gratings in Photosensitive Media

    NASA Technical Reports Server (NTRS)

    Curley, M.; Sarkisov, S. S.; Fields, A.; Smith, C.; Kukhtarev, N.; Kulishov, M. B.; Adamovsky, Grigory

    2001-01-01

    An all-optical micromotor with a rotor driven by a traveling wave of surface deformation of a stator being in contact with the rotor is being studied. Instead of an ultrasonic wave produced by an electrically driven piezoelectric actuator as in ultrasonic motors, the wave is a result of a photo-induced surface deformation of a photosensitive material produced by an incident radiation. A thin piezoelectric polymer will deform more easily LiNbO3 or metal when irradiated with light. The type of photosensitive material studied are piezoelectric polymers with and without coatings for connecting electrodes. In order to be considered as a possible candidate for micromotors, the material should exhibit surface deformation produced by a laser beam of the order of 10 microns. This is compared to the deformations produced by static holographic gratings studied in photorefractive crystals of LiNbO3 using high vertical resolution surface profilometer Dektak 3 and surface interferometer WYKO. An experimental setup showing the oscillations has been developed. The setup uses a chopped beam from an Argon ion laser to produce the deformation while a probe beam is reflected by the thin film into a fiber which is then detected on an oscilloscope. A ramp voltage signal generator will drive the piezoelectric film in another experiment to determine the resonance of the film. A current is generated when light is incident upon the film and this current can be measured. The reverse process has already been demonstrated in other piezoelectric actuators. Changing voltage, polarity, and frequency of the signal can easily generate vibrations similar to those when light is incident on the film. This can be compared to the effects of laser interaction with light absorbing fluids such as solutions of 2,9,16,23-Tetrakis(phenylthio)-29H, 31 H-phthalocyanine in chlorobenzene in capillary tubes, The possibility of using a liquid with the piezoelectric film would be a novel idea for a micromotor since

  15. Optical NOR logic gate design on square lattice photonic crystal platform

    NASA Astrophysics Data System (ADS)

    D'souza, Nirmala Maria; Mathew, Vincent

    2016-05-01

    We numerically demonstrate a new configuration of all-optical NOR logic gate with square lattice photonic crystal (PhC) waveguide using finite difference time domain (FDTD) method. The logic operations are based on interference effect of optical waves. We have determined the operating frequency range by calculating the band structure for a perfectly periodic PhC using plane wave expansion (PWE) method. Response time of this logic gate is 1.98 ps and it can be operated with speed about 513 GB/s. The proposed device consists of four linear waveguides and a square ring resonator waveguides on PhC platform.

  16. Programmable Logic Controllers.

    ERIC Educational Resources Information Center

    Insolia, Gerard; Anderson, Kathleen

    This document contains a 40-hour course in programmable logic controllers (PLC), developed for a business-industry technology resource center for firms in eastern Pennsylvania by Northampton Community College. The 10 units of the course cover the following: (1) introduction to programmable logic controllers; (2) DOS primer; (3) prerequisite…

  17. Fundamentals of Digital Logic.

    ERIC Educational Resources Information Center

    Noell, Monica L.

    This course is designed to prepare electronics personnel for further training in digital techniques, presenting need to know information that is basic to any maintenance course on digital equipment. It consists of seven study units: (1) binary arithmetic; (2) boolean algebra; (3) logic gates; (4) logic flip-flops; (5) nonlogic circuits; (6)…

  18. Identifying Logical Necessity

    ERIC Educational Resources Information Center

    Yopp, David

    2010-01-01

    Understanding logical necessity is an important component of proof and reasoning for teachers of grades K-8. The ability to determine exactly where young students' arguments are faulty offers teachers the chance to give youngsters feedback as they progress toward writing mathematically valid deductive proofs. As defined, logical necessity is the…

  19. Logic via Computer Programming.

    ERIC Educational Resources Information Center

    Wieschenberg, Agnes A.

    This paper proposed the question "How do we teach logical thinking and sophisticated mathematics to unsophisticated college students?" One answer among many is through the writing of computer programs. The writing of computer algorithms is mathematical problem solving and logic in disguise and it may attract students who would otherwise stop…

  20. Intelligent medical diagnostics via molecular logic

    PubMed Central

    Konry, Tania; Walt, David R.

    2009-01-01

    In this communication, we describe the integration of microarray sensor technology with logic capability for screening combinations of proteins and DNA in a biological sample. In this system, we have demonstrated the use of a single platform amenable to both protein detection and protein-DNA detection using molecular logic gates. The pattern of protein and DNA inputs results in fluorescence outputs according to a truth table for AND and INHIBIT gates, thereby demonstrating the feasibility of performing medical diagnostics using a logic gate design. One possible application of this technique would be for the direct screening of various medical conditions that are dependent on combinations of diagnostic markers. PMID:19715272

  1. Ternary logic and mass quantum numbers

    SciTech Connect

    Sheppeard, M. D.

    2010-06-15

    Koide's prediction of the tau mass may be formulated as a condition on the three eigenvalues of a quantum Fourier series, using simple parameters, and similar triplets have been found for neutrino and hadron masses [2]. Assuming these parameters arise from quantum gravity, one would like to understand them from the more abstract context of category theory. In particular, whereas the logic of lepton spin is a linear analogue of the ordinary Boolean logic of the category of sets, mass triplets suggest an analogous ternary logic, requiring higher dimensional categorical structures.

  2. Peak-to-average power ratio reduction in all-optical orthogonal frequency division multiplexing system using rotated constellation approach

    NASA Astrophysics Data System (ADS)

    Hmood, Jassim K.; Noordin, Kamarul A.; Arof, Hamzah; Harun, Sulaiman W.

    2015-10-01

    In this paper, a new approach for reducing peak-to-average power ratio (PAPR) based on modulated half subcarriers in all-optical OFDM systems with rotated QAM constellation is presented. To reduce the PAPR, the odd subcarriers are modulated with rotated QAM constellation, while the even subcarriers are modulated with standard QAM constellation. The impact of the rotation angle on the PAPR is mathematically modeled. The effect of PAPR reduction on the system performance is investigated by simulating the all-optical OFDM system, which uses optical coupler-based inverse fast Fourier transform (IFFT)/fast Fourier transform (FFT). The all-optical system is numerically demonstrated with 29 subcarriers. Each subcarrier is modulated by a QAM modulator at a symbol rate of 25 Gsymbol/s. The results reveal that PAPR is reduced with increasing the angle of rotation. The PAPR reduction can reach about 0.8 dB when the complementary cumulative distribution function (CCDF) is 1 × 10-3. Furthermore, both the nonlinear phase noise and the optical signal-to-noise ratio (OSNR) of the system are improved in comparison with the original all-optical OFDM without PAPR reduction.

  3. Performance analysis of an all-optical OFDM system in presence of non-linear phase noise.

    PubMed

    Hmood, Jassim K; Harun, Sulaiman W; Emami, Siamak D; Khodaei, Amin; Noordin, Kamarul A; Ahmad, Harith; Shalaby, Hossam M H

    2015-02-23

    The potential for higher spectral efficiency has increased the interest in all-optical orthogonal frequency division multiplexing (OFDM) systems. However, the sensitivity of all-optical OFDM to fiber non-linearity, which causes nonlinear phase noise, is still a major concern. In this paper, an analytical model for estimating the phase noise due to self-phase modulation (SPM), cross-phase modulation (XPM), and four-wave mixing (FWM) in an all-optical OFDM system is presented. The phase noise versus power, distance, and number of subcarriers is evaluated by implementing the mathematical model using Matlab. In order to verify the results, an all-optical OFDM system, that uses coupler-based inverse fast Fourier transform/fast Fourier transform without any nonlinear compensation, is demonstrated by numerical simulation. The system employs 29 subcarriers; each subcarrier is modulated by a 4-QAM or 16-QAM format with a symbol rate of 25 Gsymbol/s. The results indicate that the phase variance due to FWM is dominant over those induced by either SPM or XPM. It is also shown that the minimum phase noise occurs at -3 dBm and -1 dBm for 4-QAM and 16-QAM, respectively. Finally, the error vector magnitude (EVM) versus subcarrier power and symbol rate is quantified using both simulation and the analytical model. It turns out that both EVM results are in good agreement with each other. PMID:25836428

  4. Regulatory Conformance Checking: Logic and Logical Form

    ERIC Educational Resources Information Center

    Dinesh, Nikhil

    2010-01-01

    We consider the problem of checking whether an organization conforms to a body of regulation. Conformance is studied in a runtime verification setting. The regulation is translated to a logic, from which we synthesize monitors. The monitors are evaluated as the state of an organization evolves over time, raising an alarm if a violation is…

  5. Nanowire NMOS Logic Inverter Characterization.

    PubMed

    Hashim, Yasir

    2016-06-01

    This study is the first to demonstrate characteristics optimization of nanowire N-Channel Metal Oxide Semiconductor (NW-MOS) logic inverter. Noise margins and inflection voltage of transfer characteristics are used as limiting factors in this optimization. A computer-based model used to produce static characteristics of NW-NMOS logic inverter. In this research two circuit configuration of NW-NMOS inverter was studied, in first NW-NMOS circuit, the noise margin for (low input-high output) condition was very low. For second NMOS circuit gives excellent noise margins, and results indicate that optimization depends on applied voltage to the inverter. Increasing gate to source voltage with (2/1) nanowires ratio results better noise margins. Increasing of applied DC load transistor voltage tends to increasing in decreasing noise margins; decreasing this voltage will improve noise margins significantly. PMID:27427653

  6. Applications of fuzzy logic

    SciTech Connect

    Zargham, M.R.

    1995-06-01

    Recently, fuzzy logic has been applied to many areas, such as process control, image understanding, robots, expert systems, and decision support systems. This paper will explain the basic concepts of fuzzy logic and its application in different fields. The steps to design a control system will be explained in detail. Fuzzy control is the first successful industrial application of fuzzy logic. A fuzzy controller is able to control systems which previously could only be controlled by skilled operators. In recent years Japan has achieved significant progress in this area and has applied it to variety of products such as cruise control for cars, video cameras, rice cookers, washing machines, etc.

  7. Optical logic array processor

    SciTech Connect

    Tanida, J.; Ichioka, Y.

    1983-01-01

    A simple method for optically implementing digital logic gates in parallel has been developed. Parallel logic gates can be achieved by using a lensless shadow-casting system with a light emitting diode array as an incoherent light source. All the sixteen logic functions for two binary variables, which are the fundamental computations of Boolean algebra, can be simply realised in parallel with these gates by changing the switching modes of a led array. Parallel computation structures of the developed optical digital array processor are demonstrated by implementing pattern logics for two binary images with high space-bandwidth product. Applications of the proposed method to parallel shift operation of the image, differentiation, and processing of gray-level image are shown. 9 references.

  8. Microdisk resonator assisted all-optical switching with improved speed using a reverse-biased p-n diode

    NASA Astrophysics Data System (ADS)

    Xie, Jingya; Zhou, Linjie; Li, Xinwan; Chen, Jianping

    2015-05-01

    We present a compact and power efficient all-optical switching using a silicon microdisk resonator integrated with a p-n junction. We study the dependence of free-carrier lifetime, one of the most critical parameters to determine the switching speed, on reverse bias, optical intensity, and p-n junction position and dimension. Our experiments reveal that the carrier lifetime decreases with the increasing reverse bias, consistent with the theoretical results. The all-optical switching of a 211-1 non-return-to-zero pseudo-random binary sequence (PRBS) signal at a data rate of 10 Gbits/s is demonstrated with p-n junction reversely biased at -15 V and the pump power being 5.96 dBm.

  9. Routing and wavelength assignment algorithms for all-optical WDM networks based on virtual multiple self-healing ring architecture

    NASA Astrophysics Data System (ADS)

    Ishikawa, Akio; Kishi, Yoji

    2000-09-01

    This paper newly proposes a self-healing architecture in all- optical WDM networks based on virtual embedded multiple rings (Virtual Multiple Self Healing Rings: VM-SHR). Focusing upon the network design aspect of the proposed architecture, this paper describes design methodologies for VM-SHR networks. For two major problems in all-optical WDM network design, that is, the connection routing and wavelength assignment problems, we first established solution models based on mathematical programming formulation, each of which can be solved by common integer programming algorithms, respectively. In addition, we also developed an efficient heuristic algorithm for the wavelength assignment problem. Their usefulness and performance are demonstrated through the extensive simulation results.

  10. Sub-wavelength terahertz beam profiling of a THz source via an all-optical knife-edge technique

    PubMed Central

    Phing, Sze Ho; Mazhorova, Anna; Shalaby, Mostafa; Peccianti, Marco; Clerici, Matteo; Pasquazi, Alessia; Ozturk, Yavuz; Ali, Jalil; Morandotti, Roberto

    2015-01-01

    Terahertz technologies recently emerged as outstanding candidates for a variety of applications in such sectors as security, biomedical, pharmaceutical, aero spatial, etc. Imaging the terahertz field, however, still remains a challenge, particularly when sub-wavelength resolutions are involved. Here we demonstrate an all-optical technique for the terahertz near-field imaging directly at the source plane. A thin layer (<100 nm-thickness) of photo carriers is induced on the surface of the terahertz generation crystal, which acts as an all-optical, virtual blade for terahertz near-field imaging via a knife-edge technique. Remarkably, and in spite of the fact that the proposed approach does not require any mechanical probe, such as tips or apertures, we are able to demonstrate the imaging of a terahertz source with deeply sub-wavelength features (<30 μm) directly in its emission plane. PMID:25711343

  11. Time-resolved chirp properties of semiconductor optical amplifiers in high-speed all-optical switches

    NASA Astrophysics Data System (ADS)

    Chen, Ligong; Lu, Rongguo; Zhang, Shangjian; Li, Jianfeng; Liu, Yong

    2013-03-01

    The chirp properties of semiconductor optical amplifiers in all-optical switches are numerically investigated using a field propagation model. The chirp dynamics in the blue-shift and red-shift sideband are analyzed under the injection of random optical pump pulses. We also analyze the impact of the blue-detuned filtering scheme that is used to eliminate the pattern effect and enhance the operating speed of the optical switching. The reason for overshoots in eye diagrams in the blue-detuned filtering scheme is explained. We find that overshoots result from the ultrafast blue chirp induced by carrier heating and two-phonon absorption. These results are very useful for semiconductor optical amplifier-based ultrafast all-optical signal processing.

  12. All-Optical Preparation of Coherent Dark States of a Single Rare Earth Ion Spin in a Crystal

    NASA Astrophysics Data System (ADS)

    Xia, Kangwei; Kolesov, Roman; Wang, Ya; Siyushev, Petr; Reuter, Rolf; Kornher, Thomas; Kukharchyk, Nadezhda; Wieck, Andreas D.; Villa, Bruno; Yang, Sen; Wrachtrup, Jörg

    2015-08-01

    All-optical addressing and coherent control of single solid-state based quantum bits is a key tool for fast and precise control of ground-state spin qubits. So far, all-optical addressing of qubits was demonstrated only in a very few systems, such as color centers and quantum dots. Here, we perform high-resolution spectroscopic of native and implanted single rare earth ions in solid, namely, a cerium ion in yttrium aluminum garnet (YAG) crystal. We find narrow and spectrally stable optical transitions between the spin sublevels of the ground and excited optical states. Utilizing these transitions we demonstrate the generation of a coherent dark state in electron spin sublevels of a single Ce3 + ion in YAG by coherent population trapping.

  13. Theoretical study of the all-optical tunable rainbow-trapping-like effect in chirped plasmonic slot waveguides

    NASA Astrophysics Data System (ADS)

    Zhu, Yu; Hu, Xiaoyong; Gong, Qihuang

    2013-03-01

    An all-optical tunable rainbow-trapping-like effect is realized theoretically in a plasmonic slot waveguide with a chirped nanograting, permeated with organic polymer made of poly(hexafluoropropylene oxide) doped with cholesteryl iodide. Gradually increasing the grating period ensures that the stop band edge of the surface plasmon polariton mode varies with position along the nanograting, which brings about the rainbow-trapping-like effect. The physical mechanism underlying the all-optical tunability of this effect is attributed to the variation in the dispersion relations of the surface plasmon polariton mode caused by the pump laser induced refractive index change of cholesteryl iodide. A shift of up to 17 μm in the trapped position of the surface plasmon polariton mode is achieved under excitation of a 450 mJ cm-2 pump laser.

  14. All-optical format conversion using a periodically poled lithium niobate waveguide and a reflective semiconductor optical amplifier

    NASA Astrophysics Data System (ADS)

    Wang, Jian; Sun, Junqiang; Sun, Qizhen; Wang, Dalin; Zhou, Minjuan; Zhang, Xinliang; Huang, Dexiu; Fejer, M. M.

    2007-07-01

    In the present letter, the authors report on the realization of all-optical format conversion by using the cascaded sum- and difference-frequency generation in a periodically poled lithium niobate waveguide and the active mode locking in a reflective-semiconductor-optical-amplifier-based fiber ring laser. Tunable format conversions from nonreturn-to-zero pseudorandom binary sequence (PRBS) signal to return-to-zero PRBS idler at 10 and 20Gbit/s are observed in the experiment.

  15. Improving Recording Density of All-Optical Magnetic Storage by Using High-Pass Angular Spectrum Filters

    NASA Astrophysics Data System (ADS)

    Zhuang, You-Yi; Zhang, Yao-Ju

    2009-10-01

    A new design is presented to improve the magnetic recording density in all-optical magnetic storage. By using the high numerical lens with a high-pass angular spectrum filter, circularly polarized laser pulses are focused into the magneto-optic film with the perpendicular anisotropy. Magnetization of the film is induced by the inverse Faraday effect. As the obstructed angle of the filter increases the magnetic recording density increases evidently. The magnetization intensity and the sidelobe effect are also discussed.

  16. On the size-dependent magnetism and all-optical magnetization switching of transition-metal silicide nanostructures

    SciTech Connect

    Glushkov, G. I.; Tuchin, A. V.; Popov, S. V.; Bityutskaya, L. A.

    2015-12-15

    Theoretical investigations of the electronic structure, synthesis, and all-optical magnetization switching of transition-metal silicide nanostructures are reported. The magnetic moment of the nanostructures is studied as a function of the silicide cluster size and configuration. The experimentally demonstrated magnetization switching of nanostructured nickel silicide by circularly polarized light makes it possible to create high-speed storage devices with high density data recording.

  17. All-optical microwave bandpass filter with negative coefficients based on a phase modulator and linearly chirped fiber Bragg gratings.

    PubMed

    Zeng, Fei; Wang, Jun; Yao, Jianping

    2005-09-01

    A novel all-optical microwave bandpass filter with negative coefficients is presented. Positive and negative coefficients are obtained through conversion from phase modulation to intensity modulation by passing the phase-modulated optical carriers through chirped fiber Bragg gratings having group-delay responses with positive and negative slopes. A two-tap transversal microwave filter with one negative coefficient is experimentally implemented. PMID:16190418

  18. All-optical NRZ wavelength conversion based on a single hybrid III-V/Si SOA and optical filtering.

    PubMed

    Wu, Yingchen; Huang, Qiangsheng; Keyvaninia, Shahram; Katumba, Andrew; Zhang, Jing; Xie, Weiqiang; Morthier, Geert; He, Jian-Jun; Roelkens, Gunther

    2016-09-01

    We demonstrate all-optical wavelength conversion (AOWC) of non-return-to-zero (NRZ) signal based on cross-gain modulation in a single heterogeneously integrated III-V-on-silicon semiconductor optical amplifier (SOA) with an optical bandpass filter. The SOA is 500 μm long and consumes less than 250 mW electrical power. We experimentally demonstrate 12.5 Gb/s and 40 Gb/s AOWC for both wavelength up and down conversion. PMID:27607638

  19. A metro-access integrated network with all-optical virtual private network function using DPSK/ASK modulation format

    NASA Astrophysics Data System (ADS)

    Tian, Yue; Leng, Lufeng; Su, Yikai

    2008-11-01

    All-optical virtual private network (VPN), which offers dedicated optical channels to connect users within a VPN group, is considered a promising approach to efficient internetworking with low latency and enhanced security implemented in the physical layer. On the other hand, time-division multiplexed (TDM) / wavelength-division multiplexed (WDM) network architecture based on a feeder-ring with access-tree topology, is considered a pragmatic migration scenario from current TDM-PONs to future WDM-PONs and a potential convergence scheme for access and metropolitan networks, due to its efficiently shared hardware and bandwidth resources. All-optical VPN internetworking in such a metro-access integrated structure is expected to cover a wider service area and therefore is highly desirable. In this paper, we present a TDM/WDM metro-access integrated network supporting all-optical VPN internetworking among ONUs in different sub- PONs based on orthogonal differential-phase-shift keying (DPSK) / amplitude-shift keying (ASK) modulation format. In each ONU, no laser but a single Mach-Zehnder modulator (MZM) is needed for the upstream and VPN signal generation, which is cost-effective. Experiments and simulations are performed to verify its feasibility as a potential solution to the future access service.

  20. Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

    NASA Astrophysics Data System (ADS)

    Chen, Cheng; Qiu, Jifang; Zhao, Lingjuan; Wu, Jian; Lou, Caiyun; Wang, Wei

    2012-06-01

    We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to- zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

  1. OptoDyCE as an automated system for high-throughput all-optical dynamic cardiac electrophysiology

    PubMed Central

    Klimas, Aleksandra; Ambrosi, Christina M.; Yu, Jinzhu; Williams, John C.; Bien, Harold; Entcheva, Emilia

    2016-01-01

    The improvement of preclinical cardiotoxicity testing, discovery of new ion-channel-targeted drugs, and phenotyping and use of stem cell-derived cardiomyocytes and other biologics all necessitate high-throughput (HT), cellular-level electrophysiological interrogation tools. Optical techniques for actuation and sensing provide instant parallelism, enabling contactless dynamic HT testing of cells and small-tissue constructs, not affordable by other means. Here we show, computationally and experimentally, the limits of all-optical electrophysiology when applied to drug testing, then implement and validate OptoDyCE, a fully automated system for all-optical cardiac electrophysiology. We validate optical actuation by virally introducing optogenetic drivers in rat and human cardiomyocytes or through the modular use of dedicated light-sensitive somatic ‘spark' cells. We show that this automated all-optical approach provides HT means of cellular interrogation, that is, allows for dynamic testing of >600 multicellular samples or compounds per hour, and yields high-content information about the action of a drug over time, space and doses. PMID:27161419

  2. Mitigation of phase noise in all-optical OFDM systems based on minimizing interaction time between subcarriers

    NASA Astrophysics Data System (ADS)

    Hmood, Jassim K.; Noordin, Kamarul A.; Harun, Sulaiman W.; Shalaby, Hossam M. H.

    2015-11-01

    A new approach to mitigate the phase noise in all-optical OFDM systems is analytically modeled and numerically demonstrated. The interaction time between subcarriers is minimized by shaping the envelopes of QAM subcarriers and making a delay time between even and odd subcarriers. Return-to-zero (RZ) coding is adopted for shaping the envelopes of subcarriers. In addition, the subcarriers are alternately delayed (AD) by optical time delayers. The performance of an all-optical OFDM system, that implements the proposed technique, is analyzed and simulated. This system has 29 subcarriers with symbol rate of 25 Gsymbol/s and is composed of coupler-based inverse fast Fourier transform (IFFT)/fast Fourier transform (FFT) schemes. Each subcarrier is modulated with QAM format before shaping with RZ coding. Due to RZ being more affected by dispersion; a full periodic dispersion map is adopted to keep the total accumulated dispersion low. The results reveal that the nonlinear phase noise (NPN) due to fiber nonlinearity is significantly mitigated when the time delay between the odd and even subcarriers is equal to half the symbol period. The total phase noise variance is reduced from 9.3×10-3 to 6.1×10-3 rad2 when employing AD RZ-QAM for a transmission distance of 550 km. Furthermore, both the transmission distance and optical signal to noise ratio (OSNR) are improved when compared to all-optical OFDM systems that adopt traditional QAM modulation formats.

  3. OptoDyCE as an automated system for high-throughput all-optical dynamic cardiac electrophysiology.

    PubMed

    Klimas, Aleksandra; Ambrosi, Christina M; Yu, Jinzhu; Williams, John C; Bien, Harold; Entcheva, Emilia

    2016-01-01

    The improvement of preclinical cardiotoxicity testing, discovery of new ion-channel-targeted drugs, and phenotyping and use of stem cell-derived cardiomyocytes and other biologics all necessitate high-throughput (HT), cellular-level electrophysiological interrogation tools. Optical techniques for actuation and sensing provide instant parallelism, enabling contactless dynamic HT testing of cells and small-tissue constructs, not affordable by other means. Here we show, computationally and experimentally, the limits of all-optical electrophysiology when applied to drug testing, then implement and validate OptoDyCE, a fully automated system for all-optical cardiac electrophysiology. We validate optical actuation by virally introducing optogenetic drivers in rat and human cardiomyocytes or through the modular use of dedicated light-sensitive somatic 'spark' cells. We show that this automated all-optical approach provides HT means of cellular interrogation, that is, allows for dynamic testing of >600 multicellular samples or compounds per hour, and yields high-content information about the action of a drug over time, space and doses. PMID:27161419

  4. Computer Programming and Logical Reasoning: Unintended Cognitive Effects.

    ERIC Educational Resources Information Center

    Seidman, Robert H.

    1990-01-01

    Discussion of the use of computer programing languages to facilitate cognitive skill transfer focuses on logical reasoning. Conditional logic principles are examined, and a study is described that examined the effects of learning the LOGO Programing Language on fifth graders' conditional reasoning abilities. (35 references) (LRW)

  5. All-optical ultrafast wavelength and mode converter based on inter-modal four-wave mixing in few-mode fibers

    NASA Astrophysics Data System (ADS)

    Weng, Yi; He, Xuan; Wang, Junyi; Pan, Zhongqi

    2015-08-01

    An ultrafast all-optical simultaneous wavelength and mode conversion scheme is purposed based on intermodal four-wave mixing (IM-FWM), with the capability of switching state of polarization (SOP) and mode degeneracy orientation (MDO) in few-mode fibers (FMF). The relation among the conversion efficiency, pump power and phase matching conditions is investigated in theory analysis and simulation. Using this scheme, cross-polarization modulation (XPolM) and cross-mode modulation (XMM) can be achieved, by in the best case up to 50% conversion efficiency. Furthermore, numerical results further indicate that the proposed configuration has the potential application for generating doughnut modes by the mixing of three characteristic spatial frequencies.

  6. On the suitability of fibre optical parametric amplifiers for use in all-optical agile photonic networks

    NASA Astrophysics Data System (ADS)

    Gryspolakis, Nikolaos

    B. Next, we introduce modulated channels to the amplifier in order to compare their effect on the Bit Error Rate (BER) performance. We consider the impact on FOPAs when employing different modulation formats, such as RZ, NRZ and RZ-DPSK. Carefully selected modulation formats can improve BER performance and reduce the effects of cross-phase modulation, four wave mixing (FWM) products generation or dispersion (non-linear and linear inter-channel interference). Especially for the case of FOPAs, because of the ultra-fast interaction times of the FWM phenomenon, cross gain modulation can be a great deterrent for using FOPAs. We use RZ-DPSK in order to suppress the WDM signal crosstalk. Only by using RZ-DPSK, we obtain an improved receiver sensitivity of 5 dB when operating at 40 Gb/s. Finally, we investigate ways to mitigate such effects as the ones described above (gain excursions, gain tilt, etc.). We demonstrate that by using a ring configuration with optical feedback for the first time in FOPAs, we can achieve all-optical gain clamping (AOGC), mitigating gain excursions and attaining gain, independent of channel input power for a large range of PCIP. For example, with the use of AOGC, we reduce the add/drop-induced gain excursions from 4 dB to 0.6 dB. Also, by the combined use of AOGC and RZ-DPSK, we mitigate most of the aforementioned hindrances described above.

  7. Observation of Noise-Assisted Transport in an All-Optical Cavity-Based Network

    NASA Astrophysics Data System (ADS)

    Viciani, Silvia; Lima, Manuela; Bellini, Marco; Caruso, Filippo

    2015-08-01

    Recent theoretical and experimental efforts have shown the remarkable and counterintuitive role of noise in enhancing the transport efficiency of complex systems. Here, we realize simple, scalable, and controllable optical fiber cavity networks that allow us to analyze the performance of transport networks for different conditions of interference, dephasing, and disorder. In particular, we experimentally demonstrate that the transport efficiency reaches a maximum when varying the external dephasing noise, i.e., a bell-like shape behavior that had been predicted only theoretically. These optical platforms are very promising simulators of quantum transport phenomena and could be used, in particular, to design and test optimal topologies of artificial light-harvesting structures for future solar energy technologies.

  8. All-optical measurement-based quantum-information processing in quantum dots.

    PubMed

    Kolli, Avinash; Lovett, Brendon W; Benjamin, Simon C; Stace, Thomas M

    2006-12-22

    Parity measurements on qubits can generate the entanglement resource necessary for scalable quantum computation. Here we describe a method for fast optical parity measurements on electron spin qubits within coupled quantum dots. The measurement scheme, which can be realized with existing technology, consists of the optical excitation of excitonic states followed by monitored relaxation. Conditional on the observation of a photon, the system is projected into the odd/even-parity subspaces. Our model incorporates all the primary sources of error, including detector inefficiency, effects of spatial separation and nonresonance of the dots, and also unwanted excitations. Through an analytical treatment we establish that the scheme is robust to such effects. Two applications are presented: a realization of a controlled-NOT gate, and a technique for growing large scale graph states. PMID:17280337

  9. All-optical cooling of Fermi gases via Pauli inhibition of spontaneous emission

    NASA Astrophysics Data System (ADS)

    Onofrio, Roberto

    2016-03-01

    A technique is proposed to cool Fermi gases to the regime of quantum degeneracy based on the expected inhibition of spontaneous emission due to the Pauli principle. The reduction of the linewidth for spontaneous emission originates a corresponding reduction of the Doppler temperature, which under specific conditions may give rise to a runaway process through which fermions are progressively cooled. The approach requires a combination of a magneto-optical trap as a cooling system and an optical dipole trap to enhance quantum degeneracy. This results in expected Fermi degeneracy factors T /TF comparable to the lowest values recently achieved, with potential for a direct implementation in optical lattices. The experimental demonstration of this technique should also indirectly provide a macroscopic manifestation of the Pauli exclusion principle at the atomic physics level.

  10. All-optical mode conversion via spatially multimode four-wave mixing

    NASA Astrophysics Data System (ADS)

    Danaci, Onur; Rios, Christian; Glasser, Ryan T.

    2016-07-01

    We experimentally demonstrate the conversion of a Gaussian beam to an approximate Bessel–Gauss mode by making use of a non-collinear four-wave mixing (4WM) process in hot atomic vapor. The presence of a strong, spatially non-Gaussian pump both converts the probe beam into a non-Gaussian mode, and generates a conjugate beam that is in a similar non-Gaussian mode. The resulting probe and conjugate modes are compared to the output of a Gaussian beam incident on an annular aperture that is then spatially filtered according to the phase-matching conditions imposed by the 4WM process. We find that the resulting experimental data agrees well with both numerical simulations, as well as analytical formulae describing the effects of annular apertures on Gaussian modes. These results show that spatially multimode gain platforms may be used as a new method of mode conversion.

  11. Mechanical passive logic module

    NASA Astrophysics Data System (ADS)

    Chattopadhyay, Tanay; Caulfield, H. John

    2015-02-01

    Nothing from nothing gives simple simile, but something from nothing is an interesting and challenging task. Adolf Lohmann once proposed 'do nothing machine' in optics, which only copies input to output. Passive logic module (PALM) is a special type of 'do nothing machine' which can converts inputs into one of 16 possible binary outputs. This logic module is not like the conventional irreversible one. It is a simple type of reversible Turing machine. In this manuscript we discussed and demonstrated PALM using mechanical movement of plane mirrors. Also we discussed the theoretical model of micro electro mechanical system (MEMS) based PALM in this manuscript. It may have several valuable properties such as passive operation (no need for nonlinear elements as other logic device require) and modular logic (one device implementing any Boolean logic function with simple internal changes). The result is obtained from the demonstration by only looking up the output. No calculation is required to get the result. Not only that, PALM is a simple type of the famous 'billiard ball machine', which also discussed in this manuscript.

  12. Diagnosable structured logic array

    NASA Technical Reports Server (NTRS)

    Whitaker, Sterling (Inventor); Miles, Lowell (Inventor); Gambles, Jody (Inventor); Maki, Gary K. (Inventor)

    2009-01-01

    A diagnosable structured logic array and associated process is provided. A base cell structure is provided comprising a logic unit comprising a plurality of input nodes, a plurality of selection nodes, and an output node, a plurality of switches coupled to the selection nodes, where the switches comprises a plurality of input lines, a selection line and an output line, a memory cell coupled to the output node, and a test address bus and a program control bus coupled to the plurality of input lines and the selection line of the plurality of switches. A state on each of the plurality of input nodes is verifiably loaded and read from the memory cell. A trusted memory block is provided. The associated process is provided for testing and verifying a plurality of truth table inputs of the logic unit.

  13. All-optical beam deflection method for simultaneous thermal conductivity and thermo-optic coefficient ( d n / d T ) measurements

    NASA Astrophysics Data System (ADS)

    Putnam, Shawn A.; Fairchild, Steven B.; Arends, Armando A.; Urbas, Augustine M.

    2016-05-01

    This work describes an all-optical beam deflection method to simultaneously measure the thermal conductivity ( Λ) and thermo-optic coefficient ( d n / d T ) of materials that are absorbing at λ = 10.6 μm and are transparent to semi-transparent at λ = 632.8 nm. The technique is based on the principle of measuring the beam deflection of a probe beam (632.8 nm) in the frequency-domain due to a spatially and temporally varying index gradient that is thermally induced by 50:50 split pump beam from a CO2 laser (10.6 μm). The technique and analysis methods are validated with measurements of 10 different optical materials having Λ and d n / d T properties ranging between 0.7 W/m K ≲ Λ ≲ 33.5 W/m K and -12 × 10-6 K-1 ≲ d n / d T ≲ 14 × 10-6 K-1, respectively. The described beam deflection technique is highly related to other well-established, all-optical materials characterization methods, namely, thermal lensing and photothermal deflection spectroscopy. Likewise, due to its all-optical, pump-probe nature, it is applicable to materials characterization in extreme environments with minimal errors due to black-body radiation. In addition, the measurement principle can be extended over a broad range of electromagnetic wavelengths (e.g., ultraviolet to THz) provided the required sources, detectors, and focusing elements are available.

  14. Benchmarking emerging logic devices

    NASA Astrophysics Data System (ADS)

    Nikonov, Dmitri

    2014-03-01

    As complementary metal-oxide-semiconductor field-effect transistors (CMOS FET) are being scaled to ever smaller sizes by the semiconductor industry, the demand is growing for emerging logic devices to supplement CMOS in various special functions. Research directions and concepts of such devices are overviewed. They include tunneling, graphene based, spintronic devices etc. The methodology to estimate future performance of emerging (beyond CMOS) devices and simple logic circuits based on them is explained. Results of benchmarking are used to identify more promising concepts and to map pathways for improvement of beyond CMOS computing.

  15. All-optical controllable channel-drop filters in two-dimensional square-lattice photonic crystals

    NASA Astrophysics Data System (ADS)

    Fasihi, K.

    2016-05-01

    A novel all-optical controllable channel-drop filter in photonic crystals (PC) of square lattice is presented. We show that using a resonant-cavity-based add-drop filter with a wavelength-selective reflection feedback and a single-control switching module which is based on nonlinear PC microcavities, the dropped channel can be routed to the drop port or returned to the bus waveguide. Using the temporal coupled-mode theory and two-dimensional nonlinear finite-difference time-domain method, the performance of the proposed device is investigated and the simulation results show the validity of the proposed design.

  16. All-optical packet header and payload separation based on two TOADs for optical packet switched networks

    NASA Astrophysics Data System (ADS)

    Ji, Wei; Zhang, Min; Ye, Peida

    2006-09-01

    We present a novel all-optical header and payload separation technique that can be utilized in Un-Slotted optical packet switched networks. The technique uses two modified TOADs, one is for packet header extraction with differential modulation scheme and the other performs a simple XOR operation between the packet and its self-derived header to get the separated payload. The main virtue of this system is simple structure and low power consumption. Through numerical simulations, the operating characteristics of the scheme are illustrated. In addition, the system parameters are discussed and designed to optimize the performance of the proposed scheme.

  17. A novel 40-Gb/s all-optical inverted wavelength converter based on a modified terahertz optical asymmetric demultiplexer

    NASA Astrophysics Data System (ADS)

    Huang, Xuetian; Ye, Peida; Zhang, Min; Wang, Ling

    2004-12-01

    A novel scheme for all-optical inverted wavelength conversion with 40-Gb/s pseudorandom bit sequences (PRBSs) based on a modified terahertz optical asymmetric demultiplexer (TOAD) is proposed. The performance of the proposed wavelength converter is analyzed in term of extinction ratio (ER) through numerical simulations. For a typical ER of 10 dB, some key characteristic parameters of the semiconductor optical amplifier (SOA) are designed. With the properly designed parameters, a high quality eye diagram is achievable, indicating that the amplitude fluctuation of the output signal is effectively reduced.

  18. Nonlinear long-period gratings in As2Se3 chalcogenide fiber for all-optical switching

    NASA Astrophysics Data System (ADS)

    Nguyen, H. C.; Yeom, D.-I.; Mägi, E. C.; Fu, L. B.; Kuhlmey, B. T.; Martijn de Sterke, C.; Eggleton, B. J.

    2008-03-01

    We present experimental demonstration of all-optical switching using long-period gratings (LPGs) in highly nonlinear As2Se3 chalcogenide fiber. We use a 135mm grating which is generated using acoustic waves. We characterize the nonlinear pulse propagation through the LPG using picosecond pulses tuned to different wavelengths with respect to the grating resonance. We compare the results with numerical simulations and observe switching at pulse peak powers around 50W, two orders of magnitude smaller than previously demonstrated in silica.

  19. Optimization of the input losses in fiber-optic communications with an acousto-optic all-optical switch.

    PubMed

    Danilyan, A V; Shulgin, V A; Chernov, V E

    2006-06-20

    We study optical losses in the single-mode fiber system with an all-optical switch based on the anisotropic acousto-optic (AO) TeO(2) 2D deflector. It is shown, theoretically and experimentally, that the mismatch of the output-fiber mode profile and the switched optical beam shape depends significantly on the monochromaticity of the light beam and is determined by the frequency dispersion of the laser beam diffracted on a Bragg AO cell. A quantitative analysis of the dependence of the input optical losses on the spectral width of the light beam is presented. PMID:16778941

  20. Polarization Maintaining Fibre Loop Mirror for NRZ-to-PRZ Conversion in All-Optical Clock Recovery

    NASA Astrophysics Data System (ADS)

    Xu, Fan; Zhang, Xin-Liang; Liu, Hai-Rong; Liu, De-Ming; Huang, De-Xiu

    2006-02-01

    We propose a novel configuration for clock extraction by converting the NRZ data into the PRZ data and by employing a polarization-maintaining fibre loop mirror (PMFLM) which is usually used as an optical comb filter. It is found that the PMFLM can simply be constructed by a polarization controller and polarization-maintaining fibre (PMF). We theoretically analyse the principle of PMFLM for the NRZ-to-PRZ conversion. Experimentally we demonstrate 10 Gbit/s all-optical clock recovery through our proposed setup. It is shown that recovered clock signal with an extinction ratio above 10 dB can be achieved.

  1. All-optical switching with 1-ps response time in a DDMEBT enabled silicon grating coupler/resonator hybrid device.

    PubMed

    Covey, John; Finke, Aaron D; Xu, Xiaochuan; Wu, Wenzhi; Wang, Yaguo; Diederich, François; Chen, Ray T

    2014-10-01

    An amorphous film of the third-order nonlinear optical material DDMEBT was spun onto silicon chips for the first time, filling 80 nm lithographic features. A 710 μm² device was designed, fabricated, and tested that acts both as a nonlinear resonator switch and as an input/output grating coupler to a perfectly vertical single mode fiber. Autocorrelation and spectral measurements indicate the device has <1 ps response time, 4 nm of switching bandwidth, and 4 dB of on/off contrast. With sufficient power, this all-optical device can potentially modulate a single optical carrier frequency in excess of 1 THz. PMID:25322028

  2. All-optical multi-channel wavelength conversion of Nyquist 16 QAM signal using a silicon waveguide.

    PubMed

    Long, Yun; Liu, Jun; Hu, Xiao; Wang, Andong; Zhou, Linjie; Zou, Kaiheng; Zhu, Yixiao; Zhang, Fan; Wang, Jian

    2015-12-01

    We experimentally demonstrate on-chip all-optical multi-channel wavelength conversion of Nyquist 16 ary quadrature amplitude modulation (16 QAM) signal in a silicon waveguide. The measured optical signal-to-noise ratio (OSNR) penalties of wavelength conversion are ∼2  dB. The observed constellations of converted idlers indicate favorable performance of silicon-waveguide-based multi-channel wavelength conversion. We also experimentally study and compare the phase-conjugated wavelength conversion by degenerate four-wave mixing (FWM) and transparent wavelength conversion by non-degenerate FWM in the silicon waveguide. PMID:26625029

  3. Properties of an ultrafast all-optical switching window in an integrated silicon-based Mach - Zehnder interferometer

    SciTech Connect

    Wu Jianwei; Luo Fengguang; Yu Zhihua; Tao Qing

    2009-03-31

    An ultrafast all-optical switch based on the integrated Mach - Zehnder interferometer (MZI) with two arms consisting of identical silicon-on-insulator (SOI) optical waveguides is presented. The operability of the presented interferometer is simulated both for the continue wave (cw) and pulsed probe signals. It is shown that at the output port of the MZI, the switching window of the probe signal is strongly dependent on the energy and duration of the ultrafast control pulse and the SOI waveguide length. In addition, the initial delay time between both two optical waves will significantly affect the optical switching window when a pulsed probe signal wave is used. (integrated optics)

  4. Towards all-optical quantification of force- and power-based performance metrics in cilia-driven fluid flow physiology (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Huang, Brendan K.; Khokha, Mustafa K.; Loewenberg, Michael; Choma, Michael A.

    2016-03-01

    In pulmonary ciliary physiology, most tissue-level measures of performance focus on flow velocity. However, as with the heart, fluid transport performance requires an understanding of force and power generation under various loading conditions. Here, we present our initial work in quantifying shearing force and net power dissipation from OCT-based cilia-driven fluid flow velocimetry. Typical measurements of force require invasive contact with the ciliated surface, while measurements of power rely on metabolic consumption that reflect energy consumption not just from cilia, but from the entirety of cellular processes. We will present two different approaches to non-contact, all-optical shear force and power dissipation physiology. First, we developed a lumped-parameter model of flow driven by a ciliated surface. The lumped-parameter model yields semi-quantitative, Ohm's law-type relationships (F=U*R and P=U*F) between flow velocity (U), shear force (F), viscous resistance (R), and power dissipation (P). This model allows a lumped (spatially averaged) approach to evaluate force and power performance under viscous loading, an approach we demonstrated using ciliated Xenopus embryos. Second, we numerically estimate shear force and power dissipation using flow velocity fields acquired using OCT. Specifically, the velocity gradient tensor estimated from the flow velocity field contains the required information to estimate both shear force and net power dissipation. We have preliminary data using this numerical approach in Xenopus. Our results support the feasibility of an all-optical approach to estimating mesoscopic measures of force and power in ciliary physiology.

  5. LOGIC ANALYSIS: TESTING PROGRAM THEORY TO BETTER EVALUATE COMPLEX INTERVENTIONS

    PubMed Central

    Rey, Lynda; Brousselle, Astrid; Dedobbeleer, Nicole

    2016-01-01

    Evaluating complex interventions requires an understanding of the program’s logic of action. Logic analysis, a specific type of program theory evaluation based on scientific knowledge, can help identify either the critical conditions for achieving desired outcomes or alternative interventions for that purpose. In this article, we outline the principles of logic analysis and its roots. We then illustrate its use with an actual evaluation case. Finally, we discuss the advantages of conducting logic analysis prior to other types of evaluations. This article will provide evaluators with both theoretical and practical information to help them in conceptualizing their evaluations.

  6. Radiation tolerant combinational logic cell

    NASA Technical Reports Server (NTRS)

    Maki, Gary R. (Inventor); Gambles, Jody W. (Inventor); Whitaker, Sterling (Inventor)

    2009-01-01

    A system has a reduced sensitivity to Single Event Upset and/or Single Event Transient(s) compared to traditional logic devices. In a particular embodiment, the system includes an input, a logic block, a bias stage, a state machine, and an output. The logic block is coupled to the input. The logic block is for implementing a logic function, receiving a data set via the input, and generating a result f by applying the data set to the logic function. The bias stage is coupled to the logic block. The bias stage is for receiving the result from the logic block and presenting it to the state machine. The state machine is coupled to the bias stage. The state machine is for receiving, via the bias stage, the result generated by the logic block. The state machine is configured to retain a state value for the system. The state value is typically based on the result generated by the logic block. The output is coupled to the state machine. The output is for providing the value stored by the state machine. Some embodiments of the invention produce dual rail outputs Q and Q'. The logic block typically contains combinational logic and is similar, in size and transistor configuration, to a conventional CMOS combinational logic design. However, only a very small portion of the circuits of these embodiments, is sensitive to Single Event Upset and/or Single Event Transients.

  7. Temporal logics meet telerobotics

    NASA Technical Reports Server (NTRS)

    Rutten, Eric; Marce, Lionel

    1989-01-01

    The specificity of telerobotics being the presence of a human operator, decision assistance tools are necessary for the operator, especially in hostile environments. In order to reduce execution hazards due to a degraded ability for quick and efficient recovery of unexpected dangerous situations, it is of importance to have the opportunity, amongst others, to simulate the possible consequences of a plan before its actual execution, in order to detect these problematic situations. Hence the idea of providing the operator with a simulator enabling him to verify the temporal and logical coherence of his plans. Therefore, the power of logical formalisms is used for representation and deduction purposes. Starting from the class of situations that are represented, a STRIPS (the STanford Research Institute Problem Solver)-like formalism and its underlying logic are adapted to the simulation of plans of actions in time. The choice of a temporal logic enables to build a world representation, on which the effects of plans, grouping actions into control structures, will be transcribed by the simulation, resulting in a verdict and information about the plan's coherence.

  8. Quantum probabilistic logic programming

    NASA Astrophysics Data System (ADS)

    Balu, Radhakrishnan

    2015-05-01

    We describe a quantum mechanics based logic programming language that supports Horn clauses, random variables, and covariance matrices to express and solve problems in probabilistic logic. The Horn clauses of the language wrap random variables, including infinite valued, to express probability distributions and statistical correlations, a powerful feature to capture relationship between distributions that are not independent. The expressive power of the language is based on a mechanism to implement statistical ensembles and to solve the underlying SAT instances using quantum mechanical machinery. We exploit the fact that classical random variables have quantum decompositions to build the Horn clauses. We establish the semantics of the language in a rigorous fashion by considering an existing probabilistic logic language called PRISM with classical probability measures defined on the Herbrand base and extending it to the quantum context. In the classical case H-interpretations form the sample space and probability measures defined on them lead to consistent definition of probabilities for well formed formulae. In the quantum counterpart, we define probability amplitudes on Hinterpretations facilitating the model generations and verifications via quantum mechanical superpositions and entanglements. We cast the well formed formulae of the language as quantum mechanical observables thus providing an elegant interpretation for their probabilities. We discuss several examples to combine statistical ensembles and predicates of first order logic to reason with situations involving uncertainty.

  9. Logic and Simulation.

    ERIC Educational Resources Information Center

    Straumanis, Joan

    A major problem in teaching symbolic logic is that of providing individualized and early feedback to students who are learning to do proofs. To overcome this difficulty, a computer program was developed which functions as a line-by-line proof checker in Sentential Calculus. The program, DEMON, first evaluates any statement supplied by the student…

  10. Programmable Logic Application Notes

    NASA Technical Reports Server (NTRS)

    Katz, Richard

    2000-01-01

    This column will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter will start a series of notes concentrating on analysis techniques with this issues section discussing worst-case analysis requirements.

  11. Programmable Logic Application Notes

    NASA Technical Reports Server (NTRS)

    Katz, Richard; Day, John H. (Technical Monitor)

    2001-01-01

    This report will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter will continue a series of notes concentrating on analysis techniques with this issue's section discussing the use of Root-Sum-Square calculations for digital delays.

  12. All-optical manipulation and probing of the d–f exchange interaction in EuTe

    PubMed Central

    Subkhangulov, R. R.; Henriques, A. B.; Rappl, P. H. O.; Abramof, E.; Rasing, Th.; Kimel, A. V.

    2014-01-01

    We demonstrate that the ultrafast fast dynamics of the d–f exchange interaction, between conduction band electrons and lattice spins in EuTe, can be accessed using an all-optical technique. Our results reveal, in full detail, the time evolution of the d–f exchange interaction induced by a femtosecond laser pulse. Specifically, by monitoring the time resolved dynamics of the reflectivity changes and Kerr rotation of a weak light pulse reflected from the surface of the sample, it is shown that an intense femtosecond light pulse with photon energies higher than that of the bandgap, triggers spin waves in EuTe. The laser-induced spin waves modulate the d–f exchange interaction, and cause the bandgap to oscillate with an amplitude reaching 1 meV, at frequencies up to tens of GHz. The ability to control and monitor the dynamics of the exchange energy with our all-optical technique opens up new opportunities for the manipulation of magnetism at ultrafast time-scales. PMID:24658449

  13. A novel all-optical label processing for OPS networks based on multiple OOC sequences from multiple-groups OOC

    NASA Astrophysics Data System (ADS)

    Qiu, Kun; Zhang, Chongfu; Ling, Yun; Wang, Yibo

    2007-11-01

    This paper proposes an all-optical label processing scheme using multiple optical orthogonal codes sequences (MOOCS) for optical packet switching (OPS) (MOOCS-OPS) networks, for the first time to the best of our knowledge. In this scheme, the multiple optical orthogonal codes (MOOC) from multiple-groups optical orthogonal codes (MGOOC) are permuted and combined to obtain the MOOCS for the optical labels, which are used to effectively enlarge the capacity of available optical codes for optical labels. The optical label processing (OLP) schemes are reviewed and analyzed, the principles of MOOCS-based optical labels for OPS networks are given, and analyzed, then the MOOCS-OPS topology and the key realization units of the MOOCS-based optical label packets are studied in detail, respectively. The performances of this novel all-optical label processing technology are analyzed, the corresponding simulation is performed. These analysis and results show that the proposed scheme can overcome the lack of available optical orthogonal codes (OOC)-based optical labels due to the limited number of single OOC for optical label with the short code length, and indicate that the MOOCS-OPS scheme is feasible.

  14. On the impact of fiber-delay-lines (FDL) in an all-optical network (AON) bottleneck without wavelength conversion

    NASA Astrophysics Data System (ADS)

    Argibay-Losada, Pablo Jesus; Sahin, Gokhan

    2014-08-01

    Random access memories (RAM) are fundamental in conventional electronic switches and routers to manage short-term congestion and to decrease data loss probabilities. Switches in all-optical networks (AONs), however, do not have access to optical RAM, and therefore are prone to much higher loss levels than their electronic counterparts. Fiber-delay-lines (FDLs), able to delay an optical data packet a fixed amount of time, have been proposed in the literature as a means to alleviate those high loss levels. However, they are extremely bulky to manage, so their usage introduces a trade-off between practicality and performance in the design and operation of the AON. In this paper we study the influence that FDLs have in the performance of flows crossing an all-optical switch that acts as their bottleneck. We show how extremely low numbers of FDLs (e.g., 1 or 2) can help in reducing losses by several orders of magnitude in several illustrative scenarios with high aggregation levels. Our results therefore suggest that FDLs can be a practical means of dealing with congestion in AONs in the absence of optical RAM buffers or of suitable data interchange protocols specifically designed for AONs.

  15. An all-optical locking of a semiconductor laser to the atomic resonance line with 1 MHz accuracy.

    PubMed

    Zhang, Xiaogang; Tao, Zhiming; Zhu, Chuanwen; Hong, Yelong; Zhuang, Wei; Chen, Jingbiao

    2013-11-18

    An all-optical locking technique without extra electrical feedback control system for a semiconductor laser has been used in stabilizing the laser frequency to a hyperfine crossover transition of 87Rb 5(2)S(1/2), F = 2 → 5(2)P(3/2), F' = 2, 3 with 1 MHz level accuracy. The optical feedback signal is generated from the narrow-band Faraday anomalous dispersion optical filter (FADOF) with nonlinear saturation effect. The peak transmission of the narrow-band FADOF corresponding to 5(2)S(1/2), F = 2 → 5(2)P(3/2), F' = 2, 3 crossover transition is 18.6 %. The bandwidth is as wide as 38.9 MHz as the laser frequency changes. After locking, the laser frequency fluctuation is reduced to 1.7 MHz. The all-optical laser locking technique can be improved to much higher accuracy with increased external cavity length. The laser we have realized can provide light exactly resonant with atomic transitions used for other atom-light interaction experiments. PMID:24514314

  16. All-optical manipulation and probing of the d-f exchange interaction in EuTe.

    PubMed

    Subkhangulov, R R; Henriques, A B; Rappl, P H O; Abramof, E; Rasing, Th; Kimel, A V

    2014-01-01

    We demonstrate that the ultrafast fast dynamics of the d-f exchange interaction, between conduction band electrons and lattice spins in EuTe, can be accessed using an all-optical technique. Our results reveal, in full detail, the time evolution of the d-f exchange interaction induced by a femtosecond laser pulse. Specifically, by monitoring the time resolved dynamics of the reflectivity changes and Kerr rotation of a weak light pulse reflected from the surface of the sample, it is shown that an intense femtosecond light pulse with photon energies higher than that of the bandgap, triggers spin waves in EuTe. The laser-induced spin waves modulate the d-f exchange interaction, and cause the bandgap to oscillate with an amplitude reaching 1 meV, at frequencies up to tens of GHz. The ability to control and monitor the dynamics of the exchange energy with our all-optical technique opens up new opportunities for the manipulation of magnetism at ultrafast time-scales. PMID:24658449

  17. Investigation of data-format-transparent multiwavelength all-optical clock recovery using a single FP-SOA

    NASA Astrophysics Data System (ADS)

    Wang, Fei; Zhang, Xinliang; Xu, Enming

    2011-10-01

    Multiwavelength clock recovery (CR) is desired to perform all-optical parallel processing, which has potential application in optical communication systems that use WDM technology. Fabry-Pérot semiconductor optical amplifier (FP-SOA) can perform the similar filter function as passive FP filter, and can simultaneously provide gain for oscillation pulses in the cavity; it is essentially an active filter. We experimentally demonstrated simultaneous multiwavelength all-optical CR from input 36.47-Gb/s pseudo-return-zero (PRZ) data and non-return-zero (NRZ) data using a single multi-quantum-well (MQW) FP-SOA with facets reflectivity of 30%. The presented multiwavelength CR scheme is also suitable for PSK signals. Dual-channel CR from input two channels 36.47-Gb/s 2 23-1 NRZ-DPSK data located at different wavelength is experimentally demonstrated. This scheme is transparent for data formats, which is very important for next generation optical networks.

  18. Sandia ATM SONET Interface Logic

    Energy Science and Technology Software Center (ESTSC)

    1994-07-21

    SASIL is used to program the EPLD's (Erasable Programmable Logic Devices) and PAL's (Programmable Array Logic) that make up a large percentage of the Sandia ATM SONET Interface (OC3 version) for the INTEL Paragon.

  19. Logical elements in living cells.

    PubMed

    Kremen, A

    1984-11-01

    Recognition processes with enhanced accuracy (as performed by structures like enzymes or ribosomes) are investigated using elementary ideas of statistical mechanics and related concepts of thermodynamics. The analysis starts from a formal definition of recognition and provides a correspondence with appropriate physical properties of the macromolecular logical elements. Transitions of the recognizing system between different modifications are a necessary feature of a more exacting recognition process. Rearrangement steps provide the process with higher accuracy by performing two physical operations: (1) rearranging the phase space of the system so that the "correct" states be better separated from the "wrong" states and the probability of occupation of the "correct" states be enhanced, (2) directing the process toward the more favourable modifications thus formed. Both operations are related to changes in the physical properties of the recognizing system. These changes can be expressed as differences of macromolecular Gibbs energy levels; if ligand binding or release participate in a step, directivity of the step depends also on the actual chemical potentials of the ligands in solution. The two operations just mentioned resemble two basic operations known to be necessary in electronic digital networks: directivity of control and signal standardization. An analysis of the entire reaction catalysed by a macromolecular logical element takes into account the requirements imposed by the logical functions as well as the need that the chemical potential of the product be not restricted to very low values. To satisfy these conditions, the reaction must be supported by a so-called non-specific reaction, usually implemented by the cleavage reaction of a nucleoside triphosphate. PMID:6513567

  20. Preservice Elementary Teachers' Understanding of Logical Inference

    ERIC Educational Resources Information Center

    Hauk, Shandy; Judd, April Brown; Tsay, Jenq Jong; Barzilai, Harel; Austin, Homer

    2009-01-01

    This article reports on the logical reasoning efforts of five prospective elementary school teachers as they responded to interview prompts involving nonsense, natural, and mathematical representations of conditional statements. The interview participants evinced various levels of reliance on personal relevance, linguistic contextualization, and…