Science.gov

Sample records for angustifolia como material

  1. Antidiabetic activity of Helicteres angustifolia root.

    PubMed

    Hu, Xuansheng; Cheng, Delin; Zhang, Zhenya

    2016-06-01

    Context The root of Helicteres angustifolia L. (Sterculiaceae) has been used as folk herbal drug to treat cancer, bacterial infections, inflammatory, and flu in China. However, there is no report on its antidiabetic activity. Objective This study evaluates the antidiabetic activity of ethanol extract from H. angustifolia root. Materials and methods The promoting effect of H. angustifolia root ethanol extract (25, 50, and 100 μg/mL) on glucose uptake was evaluated using HepG2 cell, differentiated C2C12 myotubes, and differentiated 3T3-L1 adipocytes. The antidiabetic activity of the extract was assessed in vivo using STZ-induced diabetic rats by orally administration of the extract (200 and 400 mg/kg b.w.) once per day for 28 d. Blood glucose, TG, TC, TP, HDL-C, UA, BUN, AST, ALT, insulin, and HOMA-IR were analyzed. Results The results showed that the extract increased glucose uptake in C2C12 myotubes and 3T3-L1 adipocytes with an IC50 value of 79.95 and 135.96 μg/mL, respectively. And about 12%, 19%, and 10% (p < 0.05) in HepG2 cells when compared with the control at the concentration of 25, 50, and 100 μg/mL, respectively. After 28 days' treatment with the extract, significant reduction was observed in blood glucose, HOMA-IR, TC, TG, UA, BUN, AST, and ALT levels, while the levels of TP and HDL cholesterol increased. Discussion and conclusion These results suggest that H. angustifolia root ethanol extract possess potent antidiabetic activity, which is the first report on antidiabetic activity of this plant. PMID:26866383

  2. Evaluation of anti-inflammatory activity of Typha angustifolia pollen grains extracts in experimental animals

    PubMed Central

    Varpe, Saroj S.; Juvekar, Archana R.; Bidikar, Mukta P.; Juvekar, Parikshit R.

    2012-01-01

    Objective: This study was designed to evaluate the anti-inflammatory activity of aqueous and 70% methanolic extracts of pollen grains of Typha angustifolia. Materials and Methods: Female Sprague Dawley rats were used for the study. The acute anti-inflammatory activity of pollen grains of T. angustifolia was studied using the carrageenan as phlogistic agent, whereas its chronic anti-inflammatory effect was investigated by the percentage inhibition of cotton pellet-induced granuloma. Results: Both aqueous and 70% methanolic extracts of pollen grains of T. angustifolia showed significant dose-dependent inhibition of carrageenan-induced paw edema as compared to the control (P<0.001). It was observed that both the extracts at dose of 125 mg/kg inhibited the granuloma formation by 44.30% which is higher than at dose of 500, 250 mg/kg, thus causing a significant (P<0.001) non-dose-related inhibition of granuloma formation. Conclusion: The results of this study indicate that extracts of pollen grains of T. angustifolia are effective in the treatment of both acute and chronic inflammatory conditions and thus support its traditional utilization. PMID:23248413

  3. Measurement of the thermal expansion coefficient of Guadua angustifolia-Kunth using the photoacoustic technique

    NASA Astrophysics Data System (ADS)

    Bedoya, A.; Gordillo Delgado, F.; Marin, E.

    2016-02-01

    In this paper, the Linear Thermal Expansion Coefficient of Guadua angustifolia- Kunth samples was measured using the Photoacoustic (PA) technique in a heat transmission configuration and considering the thermoelastic bending as a PA signal generation mechanism in addition to the thermodiffusion ones. The obtained value of (27±7)x10-6K-1 is a reasonable value compared with that reported for similar materials such as wood.

  4. Bioactive indole alkaloids isolated from Alstonia angustifolia

    PubMed Central

    Pan, Li; Terrazas, César; Muñoz Acuña, Ulyana; Ninh, Tran Ngoc; Chai, Heebyung; Carcache de Blanco, Esperanza J.; Soejarto, Djaja D.; Satoskar, Abhay R.

    2014-01-01

    Bioassay-guided fractionation was conducted on a CHCl3-soluble extract of the stem bark of Alstonia angustifolia (Apocynaceae) collected in Vietnam using the HT-29 human colon cancer cell line, and led to the isolation of a new sarpagine-type indole alkaloid (1), together with nine known alkaloids, including four macroline-derived alkaloids (2–5), a sarpagine-type alkaloid (6), and four macroline-pleiocarpamine bisindole alkaloids (7–10). The structure of the new compound (1) was determined on the basis of spectroscopic data interpretation. Compounds 1–10 were evaluated in vitro for their NF-κB (p65) inhibitory activity against the Hela cells in an ELISA assay. The new sarpagine alkaloid, N(4)-methyltalpinine (1), was found to show significant NF-κB inhibitory activity (ED50 = 1.2 µM). Furthermore, all the isolates (1–10) were evaluated in vitro for their antileishmanial activity, and compounds (1–4, 6 and 8–10) exhibited leishmaniacidal activity against promastigotes of Leishmania mexicana. PMID:25584095

  5. Local anaesthetic activity of the essential oil of Lavandula angustifolia.

    PubMed

    Ghelardini, C; Galeotti, N; Salvatore, G; Mazzanti, G

    1999-12-01

    In this work we studied the local anaesthetic activity of the essential oil obtained from Lavandula angustifolia Mill., a medicinal plant traditionally used as an antispasmodic. We compared its activity to the essential oils obtained from two citrus fruits, Citrus reticulata Blanco and Citrus limon (L.) Burm. f., which have no medical uses. Biological tests were also performed on the major pure components of L. angustifolia Mill. essential oil: linalol and linalyl acetate as determined by GC and confirmed by GC-MS. Anaesthetic activity was evaluated in vivo in the rabbit conjunctival reflex test, and in vitro in a rat phrenic nerve-hemidiaphragm preparation. The essential oil of L. angustifolia, linalyl acetate and linanol (0.01-10 micrograms/ml) but not the oils of Citrus reticulata and Citrus limon were able to drastically reduce, in a dose-dependent manner, the electrically evoked contractions of rat phrenic-hemidiaphragm. In the rabbit conjunctival reflex test treatment with a solution of essential oil of L. angustifolia, as well as linalyl acetate and linalol (30-2500 micrograms/ml administered in the conjunctival sac) allow a dose-dependent increase in the number of stimuli necessary to provoke the reflex, thus confirming in vivo the local anaesthetic activity observed in vitro. PMID:10630108

  6. Desiccation tolerance during different desiccation strategies in A. angustifolia embryos

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Brazilian pine (Araucaria angustifolia) is native to the Atlantic Rainforest of Brazil and is an endangered species. The mature seeds are recalcitrant and have large embryos (about 2.5 cm in length) that contain more than 1 g H2O.g dry mass (dm)-1. Successful cryopreservation requires reduction of ...

  7. Steroidal saponins from fresh stems of Dracaena angustifolia

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Six new steroidal saponins (1-6), angudracanosides A-F, were isolated from fresh stems of Dracaena angustifolia, together with eight known compounds. The structures of compounds 1-6 were determined by detailed spectroscopic analyses and chemical methods. Antifungal testing of all compounds showed th...

  8. Identification and elimination of bacterial contamination during in vitro propagation of Guadua angustifolia Kunth

    PubMed Central

    Nadha, Harleen Kaur; Salwan, Richa; Kasana, Ramesh Chand; Anand, Manju; Sood, Anil

    2012-01-01

    Background: Guadua angustifolia Kunth is a very important bamboo species with significant utility in pharmaceutical, paper, charcoal, and construction industries. Microbial contamination is a major problem encountered during establishment of in vitro cultures of Guadua. Objective: This study has been designed to analyze the identity of contaminating bacteria and to develop the strategy to eliminate them during micropropagation of Guadua. Materials and Methods: We isolated and consequently analyzed partial sequence analysis of the 16S rRNA gene to identify two contaminating bacteria as (1) Pantoea agglomerans and (2) Pantoea ananatis. In addition, we also- performed antibiotic sensitivity testing on these bacterial isolates. Results: We identified kanamycin and streptomycin sulfate as potentially useful antibiotics in eliminating the contaminating bacteria. We grew shoots on multiplication medium containing BAP (2 mg/l) and adenine sulfate (10 mg/l) supplemented with kanamycin (10 μg/ml) for 10 days and transferred them to fresh medium without antibiotics and found that bacterial growth was inhibited. Moreover, we observed intensive formation of high-quality shoots. Streptomycin sulfate also inhibited bacterial growth but at higher concentration. We also demonstrated that shoots grown in streptomycin sulfate tended to be shorter and had yellow leaves. Conclusion: Thus, we have developed a novel strategy to identify and inhibit intriguing microbial contaminations of (1) Pantoea agglomerans and (2) Pantoea ananatis during establishment of in vitro cultures of Guadua. This would improve in vitro establishment of an important bamboo, Guadua angustifolia Kunth for large scale propagation. PMID:22701279

  9. Phenolic and flavonoid content of Elaeagnus angustifolia L. (leaf and flower)

    PubMed Central

    Saboonchian, Fereshte; Jamei, Rashid; Hosseini Sarghein, Siavash

    2014-01-01

    Objectives : Leaves and flowers of Elaeagnus angustifolia contain phenolic and flavonoid compounds. These compounds have antioxidant properties that protect cells from oxidative damage. The aim of this study was to determine and analyze total phenolic and flavonoid content of leaves and flowers in two E. angustifolia variants using different solvents (ethanol and methanol). Materials and Methods: Ethanolic and methanolic extracts of the plant leaves and flowers were prepared. Experiments were carried out to measure their phenolic and flavonoid content using two solvents. Data were analyzed using Instat-N software. Results: Results showed that the amount of phenolic and flavonoid compounds in both ethanolic and methanolic extracts was higher in Fariman variant compared with Mashhad variant. Ethanolic and methanolic extracts of Fariman variant had the highest amount of phenolic compound (10.91±0.18, 10.28± 0.36 mg GAE/100gFW, respectively) and also the highest amounts of flavonoids (5.80±0.10, 3.36±0.05 mgQE/100gFW, respectively). Phenolic and flavonoids compounds were better extracted using methanol and ethanol solvent. Conclusions: In both varieties and solvents, the amount of phenolic and flavonoids compounds in leaves were higher than flowers. In addition, the phenolic and flavonoids compounds were higher in Fariman compared to Mashhad variants PMID:25068137

  10. Steroidal Saponins from Fresh Stems of Dracaena angustifolia

    PubMed Central

    Min, Xu; Ying-Jun, Zhang; Xing-Cong, Li; Jacob, Melissa R.; Chong-Ren, Yang

    2010-01-01

    Six new steroidal saponins (1-6), angudracanosides A-F, were isolated from fresh stems of Dracaena angustifolia (Agavaceae), together with eight known compounds. The structures of compounds 1-6 were determined by detailed spectroscopic analyses and chemical methods. Antifungal testing of all compounds showed that 6 and 7 were active against Cryptococcus neoformans with IC50s of 9.5 and 20.0 μg/mL, respectively. PMID:20718450

  11. Evaluation of acute toxicity and anti-ulcerogenic study of rhizome starch of two source plants of Tugaksheeree (Curcuma angustifolia Roxb. and Maranta arundinacea Linn.)

    PubMed Central

    Rajashekhara, N.; Ashok, B.K.; Sharma, Parmeshwar P.; Ravishankar, B.

    2014-01-01

    Background: Disorders like hyperacidity and gastric ulcers are found very frequently now days because of a faulty lifestyle. Starches (Satwa) obtained from the rhizomes of two plants namely, Curcuma angustifolia Roxb. (Fam. Zingiberaceae) and Maranta arundinacea Linn. (Fam. Marantaceae) are used in folklore practice, as Tugaksheeree, for the treatment of the above-mentioned complaints. Aim: To assess the acute toxicity potential of the C. angustifolia and M. arundinacea along with their assessment for adaptogenic activity, by noting their effect on forced swimming-induced hypothermia and gastric ulceration in rats. Materials and Methods: For acute toxicity study, the effect of test drugs C. angustifolia and M. arundinacea rhizome starch were studied after a single administration of up to three dose levels, with 4400 mg/kg as the maximum dose. The animals were observed for 72 hours periodically and mortality was recorded up to seven days. The adaptogenic and anti-ulcer activities were assessed by determining and comparing the changes in rectal temperature, ponderal changes, ulcer index and histopathological parameters in the test drug group with that of stress control group. Results: Both the drugs did not produce any toxic symptoms or mortality even up to the maximum dose level of 4400 mg/kg. Both the test drugs significantly reversed the stress-induced gastric ulceration in comparison to stress-control rats. Starch from rhizome of C. angustifolia reversed forced swimming-induced hypothermia apparently, but not to a significant extent. However, the reversal of hypothermia found statistically significant in the rhizome starch of the M. arundinacea treated group. Conclusion: M. arundinacea had better anti-stress activity in comparision to C. angustifolia. PMID:26195908

  12. Evaluation on bioactivities of total flavonoids from Lavandula angustifolia.

    PubMed

    Zhao, Jun; Xu, Fang; Huang, Hua; Ji, Tengfei; Li, Chenyang; Tan, Wei; Chen, Yan; Ma, Long

    2015-07-01

    Lavandula angustifolia was used to treat flus and fevers, joint swelling and pain in Uighur medicine. This study aimed to investigate antioxidant, antit anti-inflammatory and antalgic noids content (530.1mg/g rutin/g dry extract) with stronger DPPH scavenging abilities and reduciactivities of total flavonoids from Lavandula angustifolia (LTF). Results indicated that LTF possesses the highest total flavong power. Some flavonoids separated from LTF, and their DPPH scavenging abilities as follows: rosmarinic acid (2, near to Vit C) >luteolin (3) >apigenin (4) >luteolin 7-O-β-D-glucoside (5) >apigenin 7-O-β-D-glucoside (6) >luteolin 7-O-β-D-glucuronide (7). LTF significantly decreased malondialdehyde (MDA) level in D-galactose induced aging model compared to the control group (P<0.05), as well as significantly increased plasma superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) activities (P<0.05). Moreover, 17.4, 34.8 and 69.6 mg/kg doses of LTF were exhibited significant analgesic and anti-inflammatory activities in a dose dependent manner (P<0.05). Cytotoxicity of LTF on Bel-7402 and Hela cell lines were showed by MTT assay also. These results verified traditional usage of this plant and suggested also that LTF is worth developing and studying further. PMID:26142514

  13. Purification and biological effects of Araucaria angustifolia (Araucariaceae) seed lectin

    SciTech Connect

    Santi-Gadelha, Tatiane; Almeida Gadelha, Carlos Alberto de; Aragao, Karoline Saboia; Gomes, Raphaela Cardoso; Freitas Pires, Alana de; Toyama, Marcos Hikari; Oliveira Toyama, Daniela de; Nunes de Alencar, Nylane Maria; Criddle, David Neil; Assreuy, Ana Maria Sampaio . E-mail: assreuy@uece.br; Cavada, Benildo Sousa . E-mail: bscavada@ufc.br

    2006-12-01

    This paper describes the purification and characterization of a new N-acetyl-D-glucosamine-specific lectin from Araucaria angustifolia (AaL) seeds (Araucariaceae) and its anti-inflammatory and antibacterial activities. AaL was purified using a combination of affinity chromatography on a chitin column and ion exchange chromatography on Sephacel-DEAE. The pure protein has 8.0 kDa (SDS-PAGE) and specifically agglutinates rabbit erythrocytes, effect that was independent of the presence of divalent cations and was inhibited after incubation with glucose and N-acetyl-D-glucosamine. AaL showed antibacterial activity against Gram-negative and Gram-positive strains, shown by scanning electron microscopy. AaL, intravenously injected into rats, showed anti-inflammatory effect, via carbohydrate site interaction, in the models of paw edema and peritonitis. This lectin can be used as a tool for studying bacterial infections and inflammatory processes.

  14. Antioxidant and Antigenotoxic Activities of the Brazilian Pine Araucaria angustifolia (Bert.) O. Kuntze

    PubMed Central

    Souza, Márcia O.; Branco, Cátia S.; Sene, Juliane; DallAgnol, Rafaela; Agostini, Fabiana; Moura, Sidnei; Salvador, Mirian

    2014-01-01

    Polyphenols are natural products with recognized potential in drug discovery and development. We aimed to evaluate the polyphenolic profile of Araucaria angustifolia bracts, and their ability to scavenge reactive species. The antioxidant and antigenotoxic effects of A. angustifolia polyphenols in MRC5 human lung fibroblast cells were also explored. The total polyphenol extract of A. angustifolia was determined by the Folin–Ciocalteu reagent and the chemical composition was confirmed by HPLC. Reactive oxygen species’ scavenging ability was investigated by the 2,2-diphenyl-1-picrylhydrazyl (DPPH) method and superoxide dismutase- and catalase-like activities. The protective effect of the extract in MRC5 cells was carried out by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide method and the determination of oxidative lipids, protein, and DNA (alkaline and enzymatic comet assay) damage. Total phenolic content of the A. angustifolia extract was 1586 ± 14.53 mg gallic acid equivalents/100 g of bracts. Catechin, epicatechin, quercetin, and apigenin were the major polyphenols. The extract was able to scavenge DPPH radicals and exhibited potent superoxide dismutase and catalase-like activities. Moreover, A. angustifolia extract significantly protected MRC5 cells against H2O2-induced mortality and oxidative damage to lipids, proteins, and DNA. Therefore, A. angustifolia has potential as a source of bioactive chemical compounds. PMID:26784661

  15. Identification of the Temperature Induced Larvicidal Efficacy of Agave angustifolia against Aedes, Culex, and Anopheles Larvae.

    PubMed

    Kajla, Mithilesh; Bhattacharya, Kurchi; Gupta, Kuldeep; Banerjee, Ujjwal; Kakani, Parik; Gupta, Lalita; Kumar, Sanjeev

    2015-01-01

    Synthetic insecticides are generally employed to control the mosquito population. However, their injudicious over usage and non-biodegradability are associated with many adverse effects on the environment and mosquitoes. The application of environment-friendly mosquitocidals might be an alternate to overcome these issues. In this study, we found that organic or aqueous extracts of Agave angustifolia leaves exhibited a strong larvicidal activity (LD50 28.27 μg/ml) against Aedes aegypti, Culex quinquefasciatus, and Anopheles stephensi larvae within a short exposure of 12 h. The larvicidal activity of A. angustifolia is inherited and independent of the plants vegetative growth. Interestingly, the plant larvicidal activity was observed exclusively during the summer season (April-August, when outside temperature is between 30 and 50°C) and it was significantly reduced during winter season (December-February, when the outside temperature falls to ~4°C or lower). Thus, we hypothesized that the larvicidal components of A. angustifolia might be induced by the manipulation of environmental temperature and should be resistant to the hot conditions. We found that the larvicidal activity of A. angustifolia was induced when plants were maintained at 37°C in a semi-natural environment against the controls that were growing outside in cold weather. Pre-incubation of A. angustifolia extract at 100°C for 1 h killed 60% larvae in 12 h, which gradually increased to 100% mortality after 24 h. In addition, the dry powder formulation of A. angustifolia, also displayed a strong larvicidal activity after a long shelf life. Together, these findings revealed that A. angustifolia is an excellent source of temperature induced bioactive metabolites that may assist the preparedness for vector control programs competently. PMID:26793700

  16. Identification of the Temperature Induced Larvicidal Efficacy of Agave angustifolia against Aedes, Culex, and Anopheles Larvae

    PubMed Central

    Kajla, Mithilesh; Bhattacharya, Kurchi; Gupta, Kuldeep; Banerjee, Ujjwal; Kakani, Parik; Gupta, Lalita; Kumar, Sanjeev

    2016-01-01

    Synthetic insecticides are generally employed to control the mosquito population. However, their injudicious over usage and non-biodegradability are associated with many adverse effects on the environment and mosquitoes. The application of environment-friendly mosquitocidals might be an alternate to overcome these issues. In this study, we found that organic or aqueous extracts of Agave angustifolia leaves exhibited a strong larvicidal activity (LD50 28.27 μg/ml) against Aedes aegypti, Culex quinquefasciatus, and Anopheles stephensi larvae within a short exposure of 12 h. The larvicidal activity of A. angustifolia is inherited and independent of the plants vegetative growth. Interestingly, the plant larvicidal activity was observed exclusively during the summer season (April–August, when outside temperature is between 30 and 50°C) and it was significantly reduced during winter season (December–February, when the outside temperature falls to ~4°C or lower). Thus, we hypothesized that the larvicidal components of A. angustifolia might be induced by the manipulation of environmental temperature and should be resistant to the hot conditions. We found that the larvicidal activity of A. angustifolia was induced when plants were maintained at 37°C in a semi-natural environment against the controls that were growing outside in cold weather. Pre-incubation of A. angustifolia extract at 100°C for 1 h killed 60% larvae in 12 h, which gradually increased to 100% mortality after 24 h. In addition, the dry powder formulation of A. angustifolia, also displayed a strong larvicidal activity after a long shelf life. Together, these findings revealed that A. angustifolia is an excellent source of temperature induced bioactive metabolites that may assist the preparedness for vector control programs competently. PMID:26793700

  17. Lavandula angustifolia extract improves deteriorated synaptic plasticity in an animal model of Alzheimer’s disease

    PubMed Central

    Soheili, Masoud; Tavirani, Mostafa Rezaei; Salami, Mahmoud

    2015-01-01

    Objective(s): Neurodegenerative Alzheimer’s disease (AD) is associated with profound deficits in synaptic transmission and synaptic plasticity. Long-term potentiation (LTP), an experimental form of synaptic plasticity, is intensively examined in hippocampus. In this study we evaluated the effect of aqueous extract of lavender (Lavandula angustifolia) on induction of LTP in the CA1 area of hippocampus. In response to stimulation of the Schaffer collaterals the baseline or tetanized field extracellular postsynaptic potentials (fEPSPs) were recorded in the CA1 area. Materials and Methods: The electrophysiological recordings were carried out in four groups of rats; two control groups including the vehicle (CON) and lavender (CE) treated rats and two Alzheimeric groups including the vehicle (ALZ) and lavender (AE) treated animals. Results: The extract inefficiently affected the baseline responses in the four testing groups. While the fEPSPs displayed a considerable LTP in the CON animals, no potentiation was evident in the tetanized responses in the ALZ rats. The herbal medicine effectively restored LTP in the AE group and further potentiated fEPSPs in the CE group. Conclusion: The positive effect of the lavender extract on the plasticity of synaptic transmission supports its previously reported behavioral effects on improvement of impaired spatial memory in the Alzheimeric animals. PMID:26949505

  18. Chemical investigation of the medicinal and ornamental plant Angelonia angustifolia Benth. reveals therapeutic quantities of lupeol.

    PubMed

    Deyrup, Stephen T; Asghar, Khush B; Chacko, Ann; Hebert, Jakob M; Samson, Eric; Talone, Christopher J

    2014-10-01

    Angelonia angustifolia Benth. is a small herbaceous plant with documented use as an anti-inflammatory remedy by indigenous cultures in Latin America. It has subsequently been developed as an ornamental annual widely available in nurseries in the United States. Chemical investigation led to the discovery that lupeol is the major organic soluble constituent in the roots, and is present in large quantities in the aerial structures of the plant. Lupeol was identified by 1D and 2D NMR spectroscopic techniques and quantified by HPLC-MS. The concentration of lupeol (9.14 mg/g in roots) in A. angustifolia is approximately 3 times higher than any previously reported sources. Therefore, the amount of lupeol in the roots of a single individual of A. angustifolia greatly exceeds the previously determined topical threshold for significant reduction of inflammation. The presence of topically therapeutic levels of lupeol in A. angustifolia provides chemical rationale for its indigenous use. In addition, the established cultivation of A. angustifolia could allow this plant to be used as a source of the important bioactive molecule lupeol, or to be developed as a nutraceutical without damaging wild populations. PMID:25111011

  19. Pharmacological and toxicological studies of Drimys angustifolia Miers. (Winteraceae).

    PubMed

    Witaicenis, A; Roldão, E F; Seito, L N; Rocha, N P; Di Stasi, L C

    2007-05-22

    Drimys angustifolia Miers. (Winteraceae) is a Brazilian medicinal plant used as analgesic, antiulcer and anti-inflammatory without studies to assure its efficacy and safety Leaf and stem bark extracts were evaluated to determine the antiulcer, analgesic, antiinflammatory and antioxidant activities. Preliminary toxic effects and qualitative phytochemical profile were also performed. The antiulcer activity was detected in both extracts. Administration of the leaf extract at 250 mg/kg inhibited total lesion area by 76.50% (p < 0.01 in ethanol/HCl method), while carbenoxolone at 250 mg/kg reduced lesions by 69.48%. Stem bark extract (250 mg/kg) inhibited lesion by 81.42%, while carbenoxolone by 74.10%. Similar effects were observed in the ethanol-induced ulcer method, but no activity was observed in piroxican model. The effects involve nitric oxide in gastric protection, since the L-NAME treatment reversed the protection given by the extracts. Antioxidant effects suggest an involvement against oxidative stress. In the pain (writhing, tail-flick and hot-plate tests) and inflammation (carrageenan-induced paw edema) models, the extracts did not present any effect. The phytochemical studies demonstrated that both extracts contain flavonoids, saponins, glycosilated triterpenoids, fixed acids, cyanogenic glycosides, quinones, tannins, xanthone and steroidal aglycones. Toxicological studies showed that the extracts are safe at the effective antiulcer doses. PMID:17287100

  20. Assessment of the Neuroprotective Effects of Lavandula angustifolia Extract on the Contusive Model of Spinal Cord Injury in Wistar Rats

    PubMed Central

    Kaka, Gholamreza; Yaghoobi, Kayvan; Davoodi, Shaghayegh; Hosseini, Seyed R.; Sadraie, Seyed H.; Mansouri, Korosh

    2016-01-01

    Introduction: Spinal cord injury (SCI) involves a primary trauma and secondary cellular processes that can lead to severe damage to the nervous system, resulting in long-term spinal deficits. At the cellular level, SCI causes astrogliosis, of which glial fibrillary acidic protein (GFAP) is a major index. Objective: The aim of this study was to investigate the neuroprotective effects of Lavandula angustifolia (Lav) on the repair of spinal cord injuries in Wistar rats. Materials and Methods: Forty-five female rats were randomly divided into six groups of seven rats each: the intact, sham, control (SCI), Lav 100, Lav 200, and Lav 400 groups. Every week after SCI onset, all animals were evaluated for behavior outcomes by the Basso, Beattie, and Bresnahan (BBB) score. H&E staining was performed to examine the lesions post-injury. GFAP expression was assessed for astrogliosis. Somatosensory evoked potential (SEP) testing was performed to detect the recovery of neural conduction. Results: BBB scores were significantly increased and delayed responses on sensory tests were significantly decreased in the Lav 200 and Lav 400 groups compared to the control group. The greatest decrease of GFAP was evident in the Lav 200 and Lav 400 groups. EMG results showed significant improvement in the hindlimbs in the Lav 200 and Lav 400 groups compared to the control group. Cavity areas significantly decreased and the number of ventral motor neurons significantly increased in the Lav 200 and Lav 400 groups. Conclusion: Lav at doses of 200 and 400 mg/kg can promote structural and functional recovery after SCI. The neuroprotective effects of L. angustifolia can lead to improvement in the contusive model of SCI in Wistar rats. PMID:26903793

  1. The evaluation of anti-ulcerogenic effect of rhizome starch of two source plants of Tugaksheeree (Curcuma angustifolia Roxb. and Maranta arundinacea Linn.) on pyloric ligated rats

    PubMed Central

    Rajashekhara, N.; Ashok, B. K.; Sharma, Parmeshwar P.; Ravishankar, B.

    2014-01-01

    Background: In the present era, because of the life-style, the disorders such as hyperacidity and gastric ulcers are found very frequently. Satwa (starch) obtained from the rhizomes of two plants namely Curcuma angustifolia Roxb. and Maranta arundinacea Linn. are used in folklore practice for the treatment of above complaints under the name Tugaksheeree. Aim: To compare the anti-ulcerogenic activity of the above two drugs in pyloric ligation induced gastric ulcer in albino rats. Materials and Methods: A total of 18 Wistar strain albino rats of both sexes grouped into three groups. Group C served as pyloric ligated control group, Group I received starch of C. angustifolia suspension and Group II received starch of M. arundinacea for seven days. On 8th day pylorus was ligated. After ligation the animals were deprived of food and water and sacrificed at the end of 14 h. The collected gastric contents were used for biochemical estimation and ulcer index was calculated from excised stomach. Results: Both the test drugs showed statistically significant decrease in the volume, increase in the pH, reduced the free acidity of gastric juice and decreased the peptic activity. The starch of C. angustifolia reduced a total acidity non-significantly while M. arundinacea reduced it significantly. Among the two drugs the M. arundinacea has effectively reduced the peptic activity, which is statistically significant. M. arundinacea shown statistically significant increase of total carbohydrates. Conclusion: Both the test drugs proved anti-ulcer activity and prevents the chance of gastric ulcer. Among these two M. arundinacea is more effective. PMID:25558167

  2. Genetic diversity and biogeographic determinants of population structure in Araucaria angustifolia Bert. O Ktze.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Parana pine (Araucaria angustifolia) is a dioecious conifer that plays an important social and economic role, especially in the South region of Brazil. Due to changes in land use and over- harvesting of seeds and timber, the species is now listed as critically endangered (IUCN 3.1). There have been...

  3. Cryopreservation of embryogenic cell lines of Araucaria angustifolia (Bert.) O. Kuntze

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Brazilian pine (Araucaria angustifolia) is native to the Atlantic Rainforest of Brazil and is an endangered species. Mature embryos of this conifer are large (about 3 cm in length), contain more than 1 g H2O/ g dry mass, and are killed by drying. These morphological and physiological traits make i...

  4. Lavandula angustifolia and Lavandula latifolia Essential Oils from Spain: Aromatic Profile and Bioactivities.

    PubMed

    Carrasco, Alejandro; Martinez-Gutierrez, Ramiro; Tomas, Virginia; Tudela, Jose

    2016-01-01

    Compositions of true lavender (Lavandula angustifolia) and spike lavender (Lavandula latifolia) essential oils, cultivated and extracted in the Southeast of Spain, were determined by gas chromatography coupled with mass spectrometry detection, obtaining both relative (peak area) and absolute (using standard curves) concentrations. Linalool (37-54 %), linalyl acetate (21-36 %) and (E)-β-caryophyllene (1-3 %) were the most abundant components for L. angustifolia. Linalool (35-51 %), eucalyptol (26-32 %), camphor (10-18 %), α-pinene (1-2 %), α-terpineol (1-2 %) and α-bisabolene (1-2 %) were the most abundant components for L. latifolia. The characterization was completed with enantioselective gas chromatography, in which the determined main molecules were (-)-linalool, (-)-linalyl acetate and (+)-camphor. (S)-(-)-camphene, (R)-(+)-limonene, (1R, 9S)-(-)-(E)-β-caryophyllene and (1R, 4R, 6R, 10S)-(-)-caryophyllene oxide were found in this study as the predominant enantiomers in Spanish L. angustifolia. The characterised essential oils were tested for their antioxidant activity against free radicals ABTS, DPPH, ORAC, chelating, and reducing power. Inhibitory activity on lipoxygenase was observed indicating a possible anti-inflammatory activity, mainly due to linalool, camphor, p-cymene and limonene. These results can be the starting point for a future study of the potential use of L. angustifolia and L. latifolia essential oils as natural cosmetic and natural pharmaceutical ingredients for several skin diseases. PMID:26441063

  5. Hypnotic effect of Coriandrum sativum, Ziziphus jujuba, Lavandula angustifolia and Melissa officinalis extracts in mice.

    PubMed

    Hajhashemi, Valiollah; Safaei, Azadeh

    2015-01-01

    The aim of the present study was to evaluate hypnotic effect of Coriandrum sativum, Ziziphus jujuba, Lavandula angustifolia and Melissa officinalis hydroalcoholic extracts in mice to select the most effective ones for a combination formula. Three doses of the extracts (250, 500 and 1000 mg/kg of C. sativum and Z. jujuba and 200, 400 and 800 mg/kg of L. angustifolia and M. officinalis) were orally administered to male Swiss mice (20-25 g) and one hour later pentobarbital (50 mg/kg, i.p.) was injected to induce sleep. Onset of sleep and its duration were measured and compared. Control animals and reference group received vehicle (10 ml/kg, p.o.) and diazepam (3 mg/kg, i.p.), respectively. C. sativum and Z. jujuba failed to change sleep parameters. L. angustifolia at doses of 200, 400 and 800 mg/kg shortened sleep onset by 7.6%, 50% and 51.5% and prolonged sleep duration by 9.9%, 43.1% and 80.2%, respectively. Compared with control group the same doses of M. officinalis also decreased sleep onset by 24.7%, 27.5% and 51.2% and prolonged sleep duration by 37.9%, 68.7% and 131.7% respectively. Combinations of L. angustifolia and M. officinalis extracts showed additive effect and it is suggested that a preparation containing both extracts may be useful for insomnia. PMID:26779267

  6. Hypnotic effect of Coriandrum sativum, Ziziphus jujuba, Lavandula angustifolia and Melissa officinalis extracts in mice

    PubMed Central

    Hajhashemi, Valiollah; Safaei, Azadeh

    2015-01-01

    The aim of the present study was to evaluate hypnotic effect of Coriandrum sativum, Ziziphus jujuba, Lavandula angustifolia and Melissa officinalis hydroalcoholic extracts in mice to select the most effective ones for a combination formula. Three doses of the extracts (250, 500 and 1000 mg/kg of C. sativum and Z. jujuba and 200, 400 and 800 mg/kg of L. angustifolia and M. officinalis) were orally administered to male Swiss mice (20-25 g) and one hour later pentobarbital (50 mg/kg, i.p.) was injected to induce sleep. Onset of sleep and its duration were measured and compared. Control animals and reference group received vehicle (10 ml/kg, p.o.) and diazepam (3 mg/kg, i.p.), respectively. C. sativum and Z. jujuba failed to change sleep parameters. L. angustifolia at doses of 200, 400 and 800 mg/kg shortened sleep onset by 7.6%, 50% and 51.5% and prolonged sleep duration by 9.9%, 43.1% and 80.2%, respectively. Compared with control group the same doses of M. officinalis also decreased sleep onset by 24.7%, 27.5% and 51.2% and prolonged sleep duration by 37.9%, 68.7% and 131.7% respectively. Combinations of L. angustifolia and M. officinalis extracts showed additive effect and it is suggested that a preparation containing both extracts may be useful for insomnia. PMID:26779267

  7. Comparison of Elaeagnus angustifolia Extract and Sildenafil Citrate on Female Orgasmic Disorders: A Randomized Clinical Trial

    PubMed Central

    Akbarzadeh, Marzieh; Zeinalzadeh, Sanaz; Zolghadri, Jaleh; Mohagheghzadeh, Abdolali; Faridi, Pouya; Sayadi, Mehrab

    2014-01-01

    Background Orgasmic disorder can create a feeling of deprivation and failure and provide mental problems, incompatibility and marital discord. This study aimed to compare the effects of Elaeagnus angustifolia flower extract and sildenafil citrate on female orgasmic disorder in women in 2013. Methods In this randomized clinical trial, 125 women between 18-40 years old who suffered from orgasmic disorder were divided into three E. angustifolia, sildenafil citrate and control groups. The data were gathered using Female Sexual Function Index and through measurement of TSH and prolactin. The first intervention group had to consume 4.5 gr E. angustifolia extract in two divided doses for 35 days and the second one had to use 50 mg sildenafil citrate tablets for 4 weeks one hour before their sexual relationship. However, the control group had to consume the placebo. The data were analyzed using paired t-test, one-way ANOVA, and Bonferroni posthoc test and p<0.05 was considered significant. Results The frequency of orgasmic disorder before the intervention was 41.5%, 40.5%, and 57.1% in E. angustifolia, sildenafil citrate, and control groups, respectively (p=0.23). However, these measures were respectively 29.3%, 16.7%, and 50% after the intervention (p=0.004). A significant difference between the two groups regarding sexual satisfaction after the intervention (p=0.003) compared to the beginning of the study (p=0.356). Besides, the highest reduction of changes after the intervention (58.82%) was observed in the sildenafil citrate group. Conclusion Both E. angustifolia extract and sildenafil citrate were effective in reduction of the frequency of orgasmic disorder in women. PMID:25473627

  8. Lavandula angustifolia Extract Improves the Result of Human Umbilical Mesenchymal Wharton's Jelly Stem Cell Transplantation after Contusive Spinal Cord Injury in Wistar Rats

    PubMed Central

    Yaghoobi, Kayvan; Kaka, Gholamreza; Mansouri, Korosh; Davoodi, Shaghayegh; Sadraie, Seyed Homayoon; Hosseini, Seyed Ruhollah

    2016-01-01

    Introduction. The primary trauma of spinal cord injury (SCI) results in severe damage to nervous functions. At the cellular level, SCI causes astrogliosis. Human umbilical mesenchymal stem cells (HUMSCs), isolated from Wharton's jelly of the umbilical cord, can be easily obtained. Previously, we showed that the neuroprotective effects of Lavandula angustifolia can lead to improvement in a contusive SCI model in rats. Objective. The aim of this study was to investigate the effect of L. angustifolia (Lav) on HUMSC transplantation after acute SCI. Materials and Methods. Sixty adult female rats were randomly divided into eight groups. Every week after SCI onset, all animals were evaluated for behavior outcomes. H&E staining was performed to examine the lesions after injury. GFAP expression was assessed for astrogliosis. Somatosensory evoked potential (SEP) testing was performed to detect the recovery of neural conduction. Results. Behavioral tests showed that the HUMSC group improved in comparison with the SCI group, but HUMSC + Lav 400 was very effective, resulting in a significant increase in locomotion activity. Sensory tests and histomorphological and immunohistochemistry analyses verified the potentiation effects of Lav extract on HUMSC treatment. Conclusion. Transplantation of HUMSCs is beneficial for SCI in rats, and Lav extract can potentiate the functional and cellular recovery with HUMSC treatment in rats after SCI. PMID:27057171

  9. Lavandula angustifolia Extract Improves the Result of Human Umbilical Mesenchymal Wharton's Jelly Stem Cell Transplantation after Contusive Spinal Cord Injury in Wistar Rats.

    PubMed

    Yaghoobi, Kayvan; Kaka, Gholamreza; Mansouri, Korosh; Davoodi, Shaghayegh; Sadraie, Seyed Homayoon; Hosseini, Seyed Ruhollah

    2016-01-01

    Introduction. The primary trauma of spinal cord injury (SCI) results in severe damage to nervous functions. At the cellular level, SCI causes astrogliosis. Human umbilical mesenchymal stem cells (HUMSCs), isolated from Wharton's jelly of the umbilical cord, can be easily obtained. Previously, we showed that the neuroprotective effects of Lavandula angustifolia can lead to improvement in a contusive SCI model in rats. Objective. The aim of this study was to investigate the effect of L. angustifolia (Lav) on HUMSC transplantation after acute SCI. Materials and Methods. Sixty adult female rats were randomly divided into eight groups. Every week after SCI onset, all animals were evaluated for behavior outcomes. H&E staining was performed to examine the lesions after injury. GFAP expression was assessed for astrogliosis. Somatosensory evoked potential (SEP) testing was performed to detect the recovery of neural conduction. Results. Behavioral tests showed that the HUMSC group improved in comparison with the SCI group, but HUMSC + Lav 400 was very effective, resulting in a significant increase in locomotion activity. Sensory tests and histomorphological and immunohistochemistry analyses verified the potentiation effects of Lav extract on HUMSC treatment. Conclusion. Transplantation of HUMSCs is beneficial for SCI in rats, and Lav extract can potentiate the functional and cellular recovery with HUMSC treatment in rats after SCI. PMID:27057171

  10. Ethylene-, light-, and prechill-enhanced germination of Echinacea angustifolia seeds

    SciTech Connect

    Feghahati, S.M.J.; Reese, R.N. . Dept. of Biology and Microbiology)

    1994-07-01

    Echinacea angustifolia DC., the common coneflower of the western Great Plains, is difficult to propagate by achenes due to inherent seed dormancy. The effects of light and prechilling on seed germination were examined, alone and combined with scarification (mechanical, acid) and ethylene (ethephon) treatments. The results showed that a 2-week prechill treatment combined with ethephon and continuous light, followed by a 2-week germination period in light (16 hours per day) at 25 C, could induce >95% seed germination in E. angustifolia. This was a significantly higher percentage of germination over a shorter period of time than any other method examined or previously described. This treatment also synchronized germination, with most viable seeds germinating in <1 week after being placed at 25 C in the light. Chemical name used: 2-chloroethylphosphonic acid (ethephon).

  11. Lignans in resin of Araucaria angustifolia by gas chromatography/mass spectrometry.

    PubMed

    Yamamoto, Shuichi; Otto, Angelika; Simoneit, Bernd R T

    2004-11-01

    Total extract of resin from Araucaria angustifolia was analyzed by gas chromatography/mass spectrometry and 32 lignans were identified. Lignan acetates are present in the resin and consist of four secoisolariciresinol acetates, six lariciresinol acetates, two 7'-hydroxylariciresinol acetates and an isolariciresinol acetate, which have hitherto not been reported in the plant kingdom. Shonanin and 7'-hydroxylariciresinol type lignans are also present in A. angustifolia resin. Lignans containing syringyl moieties, characteristic for angiosperms, occur in the resin and consist of 5-methoxylariciresinol-9-acetate, 5'-methoxylariciresinol-9-acetate, 5-methoxypinoresinol dimethyl ether and 5-methoxypinoresinol. This is noteworthy because syringyl moieties have only been reported for Thuja species (Cupressaceae) among the gymnosperms. The mass spectra of the various lignan trimethylsilyl derivatives are discussed with the interpretations of the fragmentation patterns. PMID:15532064

  12. Effect of chemical and physical factors to improve the germination rate of Echinacea angustifolia seeds.

    PubMed

    Chuanren, Duan; Bochu, Wang; Wanqian, Liu; Jing, Chen; Jie, Lian; Huan, Zhao

    2004-09-01

    Seeds of Echinacea angustifolia are known for their deep dormancy. In this paper, we studied the responses of E. angustifolia seeds to some chemical and physical factors, such as scarification, chilling (5 degrees C) period, light and applied BA (6-benzylaminopurine), GA3 (gibberellic acid) and sound stimulation. When the seed coat layers were removed, the germination rate grew up from 6 to 20% (incubated in light) and the mean time germination (MTG) was reduced from 18 to 6.6 days. On the basis of layers-removed, chilling and continuous light gave significantly higher germination rate (up to 70%). Compare the data of seeds chilled by 0, 6, 12, 18 and 24 days, the maximum germination rate (up to 70%) achieved at 18-days chilling treatment. Further increases in the chilling period could slightly improve germination. Exogenous application of 0.1, 0.2, 0.3 mg/L GA3 or BA in the previous pretreatment increased germination to 78, 90 and 84% or 76, 86 and 84%, respectively. Obviously, the best concentration of GA or BA is 0.3 mg/L. And the GA3 or BA treatment shortened the MTG to about 4 days. The influence of sound stimulation was also tested in the experiment. The result showed that one 100 dB and 1000 Hz sound wave (sine-wave) was beneficial to the germination of E. angustifolia seeds. PMID:15342019

  13. The stucco decorations from St. Lorenzo in Laino (Como, Italy): The materials and the techniques employed by the "Magistri Comacini".

    PubMed

    Rampazzi, Laura; Rizzo, Biagio; Colombo, Chiara; Conti, Claudia; Realini, Marco; Bartolucci, Ugo; Colombini, Maria Perla; Spiriti, Andrea; Facchin, Laura

    2008-12-01

    The paper reports a cross-cutting and systematic approach to the analytical study of Baroque stucco decorations by Italian artists known as "Magistri Comacini". Samples from the Church of St. Lorenzo in Laino (Como, Italy) were analysed using chemical and mineralogical techniques and the results interpreted with the help of art historians in order to enlighten the artistic techniques. The characterisation of the binder, aggregate and organic fractions was carried out through optical microscopy, scanning electron microscopy with microprobe, X-ray powder diffraction, Fourier transform infrared spectroscopy, gas chromatography-mass spectrometry and laser ablation mass spectrometry equipped with plasma source spectrometry. The results on major, minor and trace components ascertained various recipes. In particular, the investigation of the finishing layers corroborated hypotheses of attribution and chronology and stressed the different skills of the artists working in the building, shedding a light on details of the decoration technique. PMID:19068330

  14. Optimization of the bamboo guadua angustifolia kunth in the elaboration of glued laminated elements for constructive use

    NASA Astrophysics Data System (ADS)

    Díaz, G. A.; Cruz, R. A.; Chávez, A. M.

    2013-11-01

    Bamboo is considered one of the best timber resources in the world because for its mechanical properties and high sustainability; this research aims to improve the mechanical properties of the laminated glued bamboo Guadua Angustifolia Kunth (GAK) for use as structural elements, starting from de very manufacture process; this is important because it is possible to observe variations in the flexural strength and the elastic modulus in GAK samples taken from different heights and thickness of the culm. In order to analyze the influence of these final mechanical properties variations in the laminated, the height of the culm where samples are extracted (cepa, basa and sobrebasa) it is taken as a variable from where different types of laminated were manufactured, seeking to make optimal the configuration based in the transversal section area and the material strength. Three assemblies were designed varying the overlap of the adhesion lines and it concluded that the highest strength average values were obtained in the laminated composites manufactured with samples taken from the bottom of the culm (basa), which is possible because in these elements there are less adhesion lines than the other ones (middle, top and mixed) or the better matching of themselves.

  15. Nocturnal versus diurnal CO2 uptake: how flexible is Agave angustifolia?

    PubMed Central

    Winter, Klaus; Garcia, Milton; Holtum, Joseph A. M.

    2014-01-01

    Agaves exhibit the water-conserving crassulacean acid metabolism (CAM) photosynthetic pathway. Some species are potential biofuel feedstocks because they are highly productive in seasonally dry landscapes. In plants with CAM, high growth rates are often believed to be associated with a significant contribution of C3 photosynthesis to total carbon gain when conditions are favourable. There has even been a report of a shift from CAM to C3 in response to overwatering a species of Agave. We investigated whether C3 photosynthesis can contribute substantially to carbon uptake and growth in young and mature Agave angustifolia collected from its natural habitat in Panama. In well-watered plants, CO2 uptake in the dark contributed about 75% of daily carbon gain. This day/night pattern of CO2 exchange was highly conserved under a range of environmental conditions and was insensitive to intensive watering. Elevated CO2 (800 ppm) stimulated CO2 fixation predominantly in the light. Exposure to CO2-free air at night markedly enhanced CO2 uptake during the following light period, but CO2 exchange rapidly reverted to its standard pattern when CO2 was supplied during the subsequent 24h. Although A. angustifolia consistently engages in CAM as its principal photosynthetic pathway, its relatively limited photosynthetic plasticity does not preclude it from occupying a range of habitats, from relatively mesic tropical environments in Panama to drier habitats in Mexico. PMID:24648568

  16. The Complete Chloroplast Genome of Guadua angustifolia and Comparative Analyses of Neotropical-Paleotropical Bamboos

    PubMed Central

    Wu, Miaoli; Lan, Siren; Cai, Bangping; Chen, Shipin; Chen, Hui; Zhou, Shiliang

    2015-01-01

    To elucidate chloroplast genome evolution within neotropical-paleotropical bamboos, we fully characterized the chloroplast genome of the woody bamboo Guadua angustifolia. This genome is 135,331 bp long and comprises of an 82,839-bp large single-copy (LSC) region, a 12,898-bp small single-copy (SSC) region, and a pair of 19,797-bp inverted repeats (IRs). Comparative analyses revealed marked conservation of gene content and sequence evolutionary rates between neotropical and paleotropical woody bamboos. The neotropical herbaceous bamboo Cryptochloa strictiflora differs from woody bamboos in IR/SSC boundaries in that it exhibits slightly contracted IRs and a faster substitution rate. The G. angustifolia chloroplast genome is similar in size to that of neotropical herbaceous bamboos but is ~3 kb smaller than that of paleotropical woody bamboos. Dissimilarities in genome size are correlated with differences in the lengths of intergenic spacers, which are caused by large-fragment insertion and deletion. Phylogenomic analyses of 62 taxa yielded a tree topology identical to that found in preceding studies. Divergence time estimation suggested that most bamboo genera diverged after the Miocene and that speciation events of extant species occurred during or after the Pliocene. PMID:26630488

  17. Agrobacterium-Mediated Stable Genetic Transformation of Populus angustifolia and Populus balsamifera.

    PubMed

    Maheshwari, Priti; Kovalchuk, Igor

    2016-01-01

    The present study demonstrates Agrobacterium tumefaciens-mediated stable genetic transformation of two species of poplar - Populus angustifolia and Populus balsamifera. The binary vector pCAMBIA-Npro-long-Luc containing the luciferase reporter gene was used to transform stem internode and axillary bud explants. Putative transformants were regenerated on selection-free medium using our previously established in vitro regeneration method. Explant type, genotype, effect of pre-culture, Agrobacterium concentration, a time period of infection and varying periods of co-culture with bacteria were tested for the transformation frequency. The highest frequency of transformation was obtained with stem internode explants pre-cultured for 2 days, infected with Agrobacterium culture at the concentration of OD600 = 0.5 for 10 min and co-cultivated with Agrobacterium for 48 h. Out of the two genotypes tested, P. balsamifera exhibited a higher transformation rate in comparison to P. angustifolia. The primary transformants that exhibited luciferase activity in a bioluminescence assay under the CCD camera when subjected to polymerase chain reaction and Southern blot analysis revealed a stable single-copy integration of luc in their genomes. The reported protocol is highly reproducible and can be applied to other species of poplar; it will also be useful for future genetic engineering of one of the most important families of woody plants for sustainable development. PMID:27014319

  18. Agrobacterium-Mediated Stable Genetic Transformation of Populus angustifolia and Populus balsamifera

    PubMed Central

    Maheshwari, Priti; Kovalchuk, Igor

    2016-01-01

    The present study demonstrates Agrobacterium tumefaciens-mediated stable genetic transformation of two species of poplar – Populus angustifolia and Populus balsamifera. The binary vector pCAMBIA-Npro-long-Luc containing the luciferase reporter gene was used to transform stem internode and axillary bud explants. Putative transformants were regenerated on selection-free medium using our previously established in vitro regeneration method. Explant type, genotype, effect of pre-culture, Agrobacterium concentration, a time period of infection and varying periods of co-culture with bacteria were tested for the transformation frequency. The highest frequency of transformation was obtained with stem internode explants pre-cultured for 2 days, infected with Agrobacterium culture at the concentration of OD600 = 0.5 for 10 min and co-cultivated with Agrobacterium for 48 h. Out of the two genotypes tested, P. balsamifera exhibited a higher transformation rate in comparison to P. angustifolia. The primary transformants that exhibited luciferase activity in a bioluminescence assay under the CCD camera when subjected to polymerase chain reaction and Southern blot analysis revealed a stable single-copy integration of luc in their genomes. The reported protocol is highly reproducible and can be applied to other species of poplar; it will also be useful for future genetic engineering of one of the most important families of woody plants for sustainable development. PMID:27014319

  19. Functional Characterisation of Anticancer Activity in the Aqueous Extract of Helicteres angustifolia L. Roots

    PubMed Central

    Li, Kejuan; Yu, Yue; Sun, Shuang; Liu, Ye; Garg, Sukant; Kaul, Sunil C.; Lei, Zhongfang; Gao, Ran; Wadhwa, Renu; Zhang, Zhenya

    2016-01-01

    Helicteres angustifolia L. is a shrub that forms a common ingredient of several cancer treatment recipes in traditional medicine system both in China and Laos. In order to investigate molecular mechanisms of its anticancer activity, we prepared aqueous extract of Helicteres angustifolia L. Roots (AQHAR) and performed several in vitro assays using human normal fibroblasts (TIG-3) and osteosarcoma (U2OS). We found that AQHAR caused growth arrest/apoptosis of U2OS cells in a dose-dependent manner. It showed no cytotoxicity to TIG-3 cells at doses up to 50 μg/ml. Biochemical, imaging and cell cycle analyses revealed that it induces ROS signaling and DNA damage response selectively in cancer cells. The latter showed upregulation of p53, p21 and downregulation of Cyclin B1 and phospho-Rb. Furthermore, AQHAR-induced apoptosis was mediated by increase in pro-apoptotic proteins including cleaved PARP, caspases and Bax. Anti-apoptotic protein Bcl-2 showed decrease in AQHAR-treated U2OS cells. In vivo xenograft tumor assays in nude mice revealed dose-dependent suppression of tumor growth and lung metastasis with no toxicity to the animals suggesting that AQHAR could be a potent and safe natural drug for cancer treatment. PMID:27010955

  20. Functional Characterisation of Anticancer Activity in the Aqueous Extract of Helicteres angustifolia L. Roots.

    PubMed

    Li, Kejuan; Yu, Yue; Sun, Shuang; Liu, Ye; Garg, Sukant; Kaul, Sunil C; Lei, Zhongfang; Gao, Ran; Wadhwa, Renu; Zhang, Zhenya

    2016-01-01

    Helicteres angustifolia L. is a shrub that forms a common ingredient of several cancer treatment recipes in traditional medicine system both in China and Laos. In order to investigate molecular mechanisms of its anticancer activity, we prepared aqueous extract of Helicteres angustifolia L. Roots (AQHAR) and performed several in vitro assays using human normal fibroblasts (TIG-3) and osteosarcoma (U2OS). We found that AQHAR caused growth arrest/apoptosis of U2OS cells in a dose-dependent manner. It showed no cytotoxicity to TIG-3 cells at doses up to 50 μg/ml. Biochemical, imaging and cell cycle analyses revealed that it induces ROS signaling and DNA damage response selectively in cancer cells. The latter showed upregulation of p53, p21 and downregulation of Cyclin B1 and phospho-Rb. Furthermore, AQHAR-induced apoptosis was mediated by increase in pro-apoptotic proteins including cleaved PARP, caspases and Bax. Anti-apoptotic protein Bcl-2 showed decrease in AQHAR-treated U2OS cells. In vivo xenograft tumor assays in nude mice revealed dose-dependent suppression of tumor growth and lung metastasis with no toxicity to the animals suggesting that AQHAR could be a potent and safe natural drug for cancer treatment. PMID:27010955

  1. The Complete Chloroplast Genome of Guadua angustifolia and Comparative Analyses of Neotropical-Paleotropical Bamboos.

    PubMed

    Wu, Miaoli; Lan, Siren; Cai, Bangping; Chen, Shipin; Chen, Hui; Zhou, Shiliang

    2015-01-01

    To elucidate chloroplast genome evolution within neotropical-paleotropical bamboos, we fully characterized the chloroplast genome of the woody bamboo Guadua angustifolia. This genome is 135,331 bp long and comprises of an 82,839-bp large single-copy (LSC) region, a 12,898-bp small single-copy (SSC) region, and a pair of 19,797-bp inverted repeats (IRs). Comparative analyses revealed marked conservation of gene content and sequence evolutionary rates between neotropical and paleotropical woody bamboos. The neotropical herbaceous bamboo Cryptochloa strictiflora differs from woody bamboos in IR/SSC boundaries in that it exhibits slightly contracted IRs and a faster substitution rate. The G. angustifolia chloroplast genome is similar in size to that of neotropical herbaceous bamboos but is ~3 kb smaller than that of paleotropical woody bamboos. Dissimilarities in genome size are correlated with differences in the lengths of intergenic spacers, which are caused by large-fragment insertion and deletion. Phylogenomic analyses of 62 taxa yielded a tree topology identical to that found in preceding studies. Divergence time estimation suggested that most bamboo genera diverged after the Miocene and that speciation events of extant species occurred during or after the Pliocene. PMID:26630488

  2. Nocturnal versus diurnal CO2 uptake: how flexible is Agave angustifolia?

    PubMed

    Winter, Klaus; Garcia, Milton; Holtum, Joseph A M

    2014-07-01

    Agaves exhibit the water-conserving crassulacean acid metabolism (CAM) photosynthetic pathway. Some species are potential biofuel feedstocks because they are highly productive in seasonally dry landscapes. In plants with CAM, high growth rates are often believed to be associated with a significant contribution of C3 photosynthesis to total carbon gain when conditions are favourable. There has even been a report of a shift from CAM to C3 in response to overwatering a species of Agave. We investigated whether C3 photosynthesis can contribute substantially to carbon uptake and growth in young and mature Agave angustifolia collected from its natural habitat in Panama. In well-watered plants, CO2 uptake in the dark contributed about 75% of daily carbon gain. This day/night pattern of CO2 exchange was highly conserved under a range of environmental conditions and was insensitive to intensive watering. Elevated CO2 (800 ppm) stimulated CO2 fixation predominantly in the light. Exposure to CO2-free air at night markedly enhanced CO2 uptake during the following light period, but CO2 exchange rapidly reverted to its standard pattern when CO2 was supplied during the subsequent 24h. Although A. angustifolia consistently engages in CAM as its principal photosynthetic pathway, its relatively limited photosynthetic plasticity does not preclude it from occupying a range of habitats, from relatively mesic tropical environments in Panama to drier habitats in Mexico. PMID:24648568

  3. Sea Level Rise and Climate Change Effects on Marsh Plants Spartina Alterniflora and Typha Angustifolia Using Mesocosms

    EPA Science Inventory

    A four month experiment using greenhouse mesocosms was conducted to analyze the effect of sea level rise and climate change on salt marsh plants Spartina alterniflora (cordgrass) and Typha angustifolia (narrow-leaved cattail). Our goal was to examine the effects of three differen...

  4. Mitochondria and redox homoeostasis as chemotherapeutic targets of Araucaria angustifolia (Bert.) O. Kuntze in human larynx HEp-2 cancer cells.

    PubMed

    Branco, Cátia dos Santos; de Lima, Émilin Dreher; Rodrigues, Tiago Selau; Scheffel, Thamiris Becker; Scola, Gustavo; Laurino, Claudia Cilene Fernandes Correia; Moura, Sidnei; Salvador, Mirian

    2015-04-25

    Natural products are among one of the most promising fields in finding new molecular targets in cancer therapy. Laryngeal carcinoma is one of the most common cancers affecting the head and neck regions, and is associated with high morbidity rate if left untreated. The aim of this study was to examine the antiproliferative effect of Araucaria angustifolia on laryngeal carcinoma HEp-2 cells. The results showed that A. angustifolia extract (AAE) induced a significant cytotoxicity in HEp-2 cells compared to the non-tumor human epithelial (HEK-293) cells, indicating a selective activity of AAE for the cancer cells. A. angustifolia extract was able to increase oxidative damage to lipids and proteins, and the production of nitric oxide, along with the depletion of enzymatic antioxidant defenses (superoxide dismutase and catalase) in the tumor cell line. Moreover, AAE was able to induce DNA damage, nuclear fragmentation and chromatin condensation. A significant increase in the Apoptosis Inducing Factor (AIF), Bax, poly-(ADP-ribose) polymerase (PARP) and caspase-3 cleavage expression were also found. These effects could be related to the ability of AAE to increase the production of reactive oxygen species through inhibition of the mitochondrial electron transport chain complex I activity and ATP production by the tumor cells. The phytochemical analysis of A. angustifolia, performed using High Resolution Mass Spectrometry (HRMS) in MS and MS/MS mode, showed the presence of dodecanoic and hexadecanoic acids, and phenolic compounds, which may be associated with the chemotherapeutic effect observed in this study. PMID:25770932

  5. Growth inhibition of an Araucaria angustifolia (Coniferopsida) fungal seed pathogen, Neofusicoccum parvum, by soil streptomycetes

    PubMed Central

    2013-01-01

    Background Araucariaceae are important forest trees of the southern hemisphere. Life expectancy of their seedlings can largely be reduced by fungal infections. In this study we have isolated and characterized such a fungus and investigated the potential of Streptomyces Actinobacteria from the respective rhizosphere to act as antagonists. Results The pathogenic fungus from Araucaria angustifolia seeds was identified by morphological markers (pore-associated Woronin-bodies) as belonging to the Pezizomycotina. Molecular data identified the fungus as Neofusicoccum parvum (Botryosphaeriaceae). Co-cultures on agar of this fungus with certain streptomycete isolates from the rhizosphere, and from the surface of Araucaria roots significantly reduced the growth of the fungus. HPLC analysis of the agar yielded streptomycete-specific exudate compounds which were partly identified. There were differences in compounds between single (bacteria, fungus) and dual cultures (bacteria + fungus). Conclusion Streptomycetes from the rhizosphere of Araucariaceae produce exudates which can suppress the development of pathogenic fungi in their seeds. PMID:23866024

  6. A new abietene diterpene and other constituents from Kaempferia angustifolia Rosc.

    PubMed

    Tang, Sook Wah; Sukari, Mohd Aspollah; Rahmani, Mawardi; Lajis, Nordin Hj; Ali, Abdul Manaf

    2011-01-01

    A new abietene diterpene, kaempfolienol (5S,6S,7S,9S,10S,11R,13S-abiet-8(14)-enepenta-6,7,9,11,13-ol, 1), was isolated from a rhizome extract of Kaempferia angustifolia Rosc. along with the known compounds crotepoxide, boesenboxide, zeylenol, 2'-hydroxy-4,4',6'-trimethoxychalcone, (24S)-24-methyl-5α-lanosta-9(11),25-dien-3β-ol, β-sitosterol and β-sitosterol-3-O-β-D-glucopyranoside. The structures of all compounds were elucidated on the basis of mass spectroscopic and NMR data. Zeylenol (2), the major constituent of the plant, was derivatized into diacetate, triacetate and epoxide derivatives through standard organic reactions. The cytotoxic activity of compounds 1, 2 and the zeylenol derivatives was evaluated against the HL-60, MCF-7, HT-29 and HeLa cell lines. PMID:21475124

  7. Hydrophobic modification of cellulose isolated from Agave angustifolia fibre by graft copolymerisation using methyl methacrylate.

    PubMed

    Rosli, Noor Afizah; Ahmad, Ishak; Abdullah, Ibrahim; Anuar, Farah Hannan; Mohamed, Faizal

    2015-07-10

    Graft copolymerisation of methyl methacrylate (MMA) onto Agave angustifolia was conducted with ceric ammonium nitrate (CAN) as the redox initiator. The maximum grafting efficiency was observed at CAN and MMA concentrations of 0.91 × 10(-3) and 5.63 × 10(-2)M, respectively, at 45°C for 3h reaction time. Four characteristic peaks at 2995, 1738, 1440, and 845 cm(-1), attributed to PMMA, were found in the IR spectrum of grafted cellulose. The crystallinity index dropped from 0.74 to 0.46, while the thermal stability improved upon grafting. The water contact angle increased with grafting yield, indicating increased hydrophobicity of cellulose. SEM images showed the grafted cellulose to be enlarged and rougher. The changes in the physical nature of PMMA-grafted cellulose can be attributed to the PMMA grafting in the amorphous regions of cellulose, causing it to expand at the expense of the crystalline component. PMID:25857961

  8. Comparative physico-chemical profiles of Tugaksheeree (Curcuma angustifolia Roxb. and Maranta arundinacea Linn.).

    PubMed

    Rajashekhara, N; Shukla, Vinay J; Ravishankar, B; Sharma, Parameshwar P

    2013-10-01

    Tugaksheeree is as an ingredient in many Ayurvedic formulations. The starch obtained from the rhizomes of two plants, is used as Tugaksheeree, Curcuma angustifolia (CA) Roxb. (Family: Zingiberaceae) and Maranta arundinacea (MA) Linn. (Family Marantaceae). In the present study, a comparative physico-analysis of both the drugs has been carried out. The results suggest that the starch from CA and MA has similar organoleptic characters. The percentage of starch content is higher in the rhizome of CA when compared with that of MA and the starch of MA is packed more densely than the starch in CA. The chemical constituents of both the starch and rhizomes are partially similar to each other. Hence, the therapeutic activities may be similar. PMID:24696578

  9. Comparative physico-chemical profiles of Tugaksheeree (Curcuma angustifolia Roxb. and Maranta arundinacea Linn.)

    PubMed Central

    Rajashekhara, N.; Shukla, Vinay J.; Ravishankar, B.; Sharma, Parameshwar P.

    2013-01-01

    Tugaksheeree is as an ingredient in many Ayurvedic formulations. The starch obtained from the rhizomes of two plants, is used as Tugaksheeree, Curcuma angustifolia (CA) Roxb. (Family: Zingiberaceae) and Maranta arundinacea (MA) Linn. (Family Marantaceae). In the present study, a comparative physico-analysis of both the drugs has been carried out. The results suggest that the starch from CA and MA has similar organoleptic characters. The percentage of starch content is higher in the rhizome of CA when compared with that of MA and the starch of MA is packed more densely than the starch in CA. The chemical constituents of both the starch and rhizomes are partially similar to each other. Hence, the therapeutic activities may be similar. PMID:24696578

  10. Increased lead and cadmium tolerance of Typha angustifolia from Huaihe River is associated with enhanced phytochelatin synthesis and improved antioxidative capacity.

    PubMed

    Liu, Yunlei; Chen, Jian; Lu, Shaonan; Yang, Libo; Qian, Jiazhong; Cao, Shuqing

    2016-11-01

    Heavy metal contamination of water is an increasing environmental problem worldwide, and the use of aquatic plants for phytoremediation of heavy metal pollution has become an important subject of research. One key to successful phytoremediation is the identification of plants that are efficient at sequestering heavy metals. In this study, we examined the growth and heavy metal accumulation of Typha angustifolia and compared growth characteristics and tolerance mechanisms in plants from the Huaihe and Chaohu Rivers irrigated with different concentrations of lead (Pb) and cadmium (Cd). T. angustifolia from Huaihe River showed enhanced tolerance and accumulation of Pb and Cd and had greater biomass and more vigorous growth than the ecotype from Chaohu River. In addition, higher phytochelatin (PC) content and significantly higher superoxide dismutase and catalase activities were detected in T. angustifolia from Huaihe River than in T. angustifolia from Chaohu River. These findings suggest that high Pb and Cd accumulation and tolerance in T. angustifolia from Chaohu River is associated with its higher PC synthesis and better antioxidative capacity, and that the Huaihe ecotype of T. angustifolia might also be an efficient species for phytoremediation of Pb and Cd in water contaminated by heavy metals. PMID:26959972

  11. Antioxidant capacity and total phenolic contents of oregano (Origanum vulgare), lavender (Lavandula angustifolia) and lemon balm (Melissa officinalis) from Romania.

    PubMed

    Spiridon, Iuliana; Colceru, Svetlana; Anghel, Narcis; Teaca, Carmen Alice; Bodirlau, Ruxanda; Armatu, Alice

    2011-10-01

    The study reported here presents a comparative screening of three medicinal plants including oregano (Origanum vulgare L.), lavender (Lavandula angustifolia) and lemon balm (Melissa officinalis) having the same geographical origin, the Southeast region of Romania, and growing in the same natural conditions. The contents of total phenolics and total flavonoids for the extracts of these were determined. Furthermore, the total antioxidant capacity was also evaluated. It was found that Origanum vulgare and Melissa officinalis extracts present the most effective antioxidant capacity in scavenging DPPH radicals, while Lavandula angustifolia is less active. High performance liquid chromatography-mass spectrometry analysis was used to identify the components of extracts. Major phenolic acids identified in the analysed species were ferulic, rosmarinic, p-coumaric and caffeic, while predominant flavonoids were quercetin, apigenin kaempherol, which were present as glucosides. PMID:21707233

  12. Lavandula angustifolia Mill. Essential Oil Exerts Antibacterial and Anti-Inflammatory Effect in Macrophage Mediated Immune Response to Staphylococcus aureus.

    PubMed

    Giovannini, D; Gismondi, A; Basso, A; Canuti, L; Braglia, R; Canini, A; Mariani, F; Cappelli, G

    2016-01-01

    Different studies described the antibacterial properties of Lavandula angustifolia (Mill.) essential oil and its anti-inflammatory effects. Besides, no data exist on its ability to activate human macrophages during the innate response against Staphylococcus aureus. The discovery of promising regulators of macrophage-mediated inflammatory response, without side effects, could be useful for the prevention of, or as therapeutic remedy for, various inflammation-mediated diseases. This study investigated, by transcriptional analysis, how a L. angustifolia essential oil treatment influences the macrophage response to Staphylococcus aureus infection. The results showed that the treatment increases the phagocytic rate and stimulates the containment of intracellular bacterial replication by macrophages. Our data showed that this stimulation is coupled with expression of genes involved in reactive oxygen species production (i.e., CYBB and NCF4). Moreover, the essential oil treatment balanced the inflammatory signaling induced by S. aureus by repressing the principal pro-inflammatory cytokines and their receptors and inducing the heme oxygenase-1 gene transcription. These data showed that the L. angustifolia essential oil can stimulate the human innate macrophage response to a bacterium which is responsible for one of the most important nosocomial infection and might suggest the potential development of this plant extract as an anti-inflammatory and immune regulatory coadjutant drug. PMID:26730790

  13. Environmental heterogeneity explains the genetic structure of Continental and Mediterranean populations of Fraxinus angustifolia Vahl.

    PubMed

    Temunović, Martina; Franjić, Jozo; Satovic, Zlatko; Grgurev, Marin; Frascaria-Lacoste, Nathalie; Fernández-Manjarrés, Juan F

    2012-01-01

    Tree species with wide distributions often exhibit different levels of genetic structuring correlated to their environment. However, understanding how environmental heterogeneity influences genetic variation is difficult because the effects of gene flow, drift and selection are confounded. We investigated the genetic variation and its ecological correlates in a wind-pollinated Mediterranean tree species, Fraxinus angustifolia Vahl, within a recognised glacial refugium in Croatia. We sampled 11 populations from environmentally divergent habitats within the Continental and Mediterranean biogeographical regions. We combined genetic data analyses based on nuclear microsatellite loci, multivariate statistics on environmental data and ecological niche modelling (ENM). We identified a geographic structure with a high genetic diversity and low differentiation in the Continental region, which contrasted with the significantly lower genetic diversity and higher population divergence in the Mediterranean region. The positive and significant correlation between environmental and genetic distances after controlling for geographic distance suggests an important influence of ecological divergence of the sites in shaping genetic variation. The ENM provided support for niche differentiation between the populations from the Continental and Mediterranean regions, suggesting that contemporary populations may represent two divergent ecotypes. Ecotype differentiation was also supported by multivariate environmental and genetic distance analyses. Our results suggest that despite extensive gene flow in continental areas, long-term stability of heterogeneous environments have likely promoted genetic divergence of ashes in this region and can explain the present-day genetic variation patterns of these ancient populations. PMID:22905171

  14. Environmental Heterogeneity Explains the Genetic Structure of Continental and Mediterranean Populations of Fraxinus angustifolia Vahl

    PubMed Central

    Temunović, Martina; Franjić, Jozo; Satovic, Zlatko; Grgurev, Marin; Frascaria-Lacoste, Nathalie; Fernández-Manjarrés, Juan F.

    2012-01-01

    Tree species with wide distributions often exhibit different levels of genetic structuring correlated to their environment. However, understanding how environmental heterogeneity influences genetic variation is difficult because the effects of gene flow, drift and selection are confounded. We investigated the genetic variation and its ecological correlates in a wind-pollinated Mediterranean tree species, Fraxinus angustifolia Vahl, within a recognised glacial refugium in Croatia. We sampled 11 populations from environmentally divergent habitats within the Continental and Mediterranean biogeographical regions. We combined genetic data analyses based on nuclear microsatellite loci, multivariate statistics on environmental data and ecological niche modelling (ENM). We identified a geographic structure with a high genetic diversity and low differentiation in the Continental region, which contrasted with the significantly lower genetic diversity and higher population divergence in the Mediterranean region. The positive and significant correlation between environmental and genetic distances after controlling for geographic distance suggests an important influence of ecological divergence of the sites in shaping genetic variation. The ENM provided support for niche differentiation between the populations from the Continental and Mediterranean regions, suggesting that contemporary populations may represent two divergent ecotypes. Ecotype differentiation was also supported by multivariate environmental and genetic distance analyses. Our results suggest that despite extensive gene flow in continental areas, long-term stability of heterogeneous environments have likely promoted genetic divergence of ashes in this region and can explain the present-day genetic variation patterns of these ancient populations. PMID:22905171

  15. Phytochemicals from Kaempferia angustifolia Rosc. and their cytotoxic and antimicrobial activities.

    PubMed

    Tang, Sook Wah; Sukari, Mohd Aspollah; Neoh, Bee Keat; Yeap, Yunie Soon Yu; Abdul, Ahmad Bustamam; Kifli, Nurolaini; Ee, Gwendoline Cheng Lian

    2014-01-01

    Phytochemical investigation on rhizomes of Kaempferia angustifolia has afforded a new abietene diterpene, kaempfolienol (1) along with crotepoxide (2), boesenboxide (3), 2'-hydroxy-4,4',6'-trimethoxychalcone (4), zeylenol (5), 6-methylzeylenol (6), (24S)-24-methyl-5α-lanosta-9(11), 25-dien-3β-ol (7), sucrose, β-sitosterol, and its glycoside (8). The structures of the compounds were elucidated on the basis of spectroscopic methods (IR, MS, and NMR). Isolation of 6-methylzeylenol (6), (24S)-24-methyl-5α-lanosta-9(11), 25-dien-3β-ol (7), and β-sitosterol-3-O-β-D-glucopyranoside (8) from this plant species has never been reported previously. The spectroscopic data of (7) is firstly described in this paper. Cytotoxic screening indicated that most of the pure compounds tested showed significant activity with (4) showing the most potent activity against HL-60 (human promyelocytic leukemia) and MCF-7 (human breast cancer) cell lines. However, all extracts and most of the pure compounds tested were found to be inactive against HT-29 (human colon cancer) and HeLa (human cervical cancer) cell lines. Similarly, none of the extracts or compounds showed activity in the antimicrobial testing. PMID:25057485

  16. Extraction optimization, preliminary characterization and immunological activities in vitro of polysaccharides from Elaeagnus angustifolia L. pulp.

    PubMed

    Du, Hongtao; Chen, Juncheng; Tian, Shan; Gu, Hongling; Li, Na; Sun, Yao; Ru, Jiajia; Wang, Junru

    2016-10-20

    In this research, extraction optimization, preliminary characterization and immunological activities in vitro of polysaccharides from Elaeagnus angustifolia L. pulp were investigated. A response surface methodology (RSM) with a Box-Behnken design (BBD) was used to optimize the extraction process. The maximum EAP yield was 9.82±0.38%, which is in good agreement with the predicted value (9.93±0.24%). Two homogeneous polysaccharides, EAP-1a and EAP-1b with molecular weights of 8.70kDa and 4.39kDa respectively, were prepared by DEAE-52 cellulose and Sephadex G-100 columns and characterized by HPLC, HPGPC, and FT-IR. Three polysaccharides (EAP, EAP-1a and EAP-1b) could stimulate macrophages to release NO and enhance phagocytic activities of RAW 264.7 cells in dose-dependent manner. Moreover, there was no significant difference between crude EAP group (400μg/mL) and positive control group (LPS) in effects on macrophages. The results implied that EAP had the potential to be developed as natural medicines or health foods. PMID:27474576

  17. Studies on the molluscicidal activity of Agave angustifolia and Pittosporum tobira on schistosomiasis transmitting snails.

    PubMed

    Ibrahim, Abdalla M; Abdel-Gawad, Mahfouz M; El-Nahas, Hanan A; Osman, Nadia S

    2015-04-01

    In the search for new molluscicidal plants for controlling the snail vectors of schistosomiasis, laboratory evaluation was made to assess the molluscicidal activity of Agave angustifolia and Pittosporum tobira plants against Biomphalaria alexandrina snails. Results indicated that both plants have promising molluscicidal activity as the LC90 of the dry powder of both plants was 120 ppm. Both plants showed marked cercaricidal and miracidicidal potencies against S. mansoni larvae. The LC90 of both plants (120 ppm) killed most B. alexandrina eggs within 24 h of exposure. The sub-lethal concentrations of both plants markedly suppressed the survival rate of B. alexandrina snails and the mortality increased with increasing the concentrations and the exposure period up to 10 successive weeks. The accumulative toxic effect of these concentrations was continuous during the recovery period. Also, the reproductive rates of exposed snails were greatly affected even through the recovery period. This depression in reproductive ability of snails was accompanied by histological damage in the hermaphrodite glands of exposed snails. Meanwhile, the growth of snails was estimated weekly and it showed great inhibition in exposed snails comparing with the control ones. PMID:26012228

  18. Patterns of genetic diversity in southern and southeastern Araucaria angustifolia (Bert.) O. Kuntze relict populations

    PubMed Central

    2009-01-01

    Habitat fragmentation and a decrease in population size may lead to a loss in population genetic diversity. For the first time, the reduction in genetic diversity in the northernmost limit of natural occurence (southeastern Brazil) of Araucaria angustifolia in comparison with populations in the main area of the species continuous natural distribution (southern Brazil), was tested. The 673 AFLPs markers revealed a high level of genetic diversity for the species (Ht = 0.27), despite anthropogenic influence throughout the last century, and a decrease of H in isolated populations of southeastern Brazil (H = 0.16), thereby indicating the tendency for higher genetic diversity in remnant populations of continuous forests in southern Brazil, when compared to natural isolated populations in the southeastern region. A strong differentiation among southern and southeastern populations was detected (AMOVA variance ranged from 10%-15%). From Bayesian analysis, it is suggested that the nine populations tested form five “genetic clusters” (K = 5). Five of these populations, located in the northernmost limit of distribution of the species, represent three “genetic clusters”. These results are in agreement with the pattern of geographic distribution of the studied populations. PMID:21637518

  19. Prebiotic potential of Agave angustifolia Haw fructans with different degrees of polymerization.

    PubMed

    Velázquez-Martínez, José Rodolfo; González-Cervantes, Rina M; Hernández-Gallegos, Minerva Aurora; Mendiola, Roberto Campos; Aparicio, Antonio R Jiménez; Ocampo, Martha L Arenas

    2014-01-01

    Inulin-type fructans are the most studied prebiotic compounds because of their broad range of health benefits. In particular, plants of the Agave genus are rich in fructans. Agave-derived fructans have a branched structure with both β-(2→1) and β-(2→6) linked fructosyl chains attached to the sucrose start unit with a degree of polymerization (DP) of up to 80 fructose units. The objective of this work was to assess the prebiotic potential of three Agave angustifolia Haw fructan fractions (AFF) with different degrees of polymerization. The three fructan fractions were extracted from the agave stem by lixiviation and then purified by ultrafiltration and ion exchange chromatography: AFF1, AFF2 and AFF3 with high (3-60 fructose units), medium (2-40) and low (2-22) DP, respectively. The fructan profile was determined with high-performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD), which confirmed a branched fructan structure. Structural elucidation was performed by Fourier Transform Infra-Red Spectroscopy. The AFF spectrum shows characteristic fructan bands. The prebiotic effect of these fractions was assessed in vitro through fermentation by Bifidobacterium and Lactobacillus strains. Four growth patterns were observed. Some bacteria did not grow with any of the AFF, while other strains grew with only AFF3. Some bacteria grew according to the molecular weight of the AFF and some grew indistinctly with the three fructan fractions. PMID:25153877

  20. Phytochemicals from Kaempferia angustifolia Rosc. and Their Cytotoxic and Antimicrobial Activities

    PubMed Central

    Tang, Sook Wah; Sukari, Mohd Aspollah; Yeap, Yunie Soon Yu; Abdul, Ahmad Bustamam; Cheng Lian Ee, Gwendoline

    2014-01-01

    Phytochemical investigation on rhizomes of Kaempferia angustifolia has afforded a new abietene diterpene, kaempfolienol (1) along with crotepoxide (2), boesenboxide (3), 2′-hydroxy-4,4′,6′-trimethoxychalcone (4), zeylenol (5), 6-methylzeylenol (6), (24S)-24-methyl-5α-lanosta-9(11), 25-dien-3β-ol (7), sucrose, β-sitosterol, and its glycoside (8). The structures of the compounds were elucidated on the basis of spectroscopic methods (IR, MS, and NMR). Isolation of 6-methylzeylenol (6), (24S)-24-methyl-5α-lanosta-9(11), 25-dien-3β-ol (7), and β-sitosterol-3-O-β-D-glucopyranoside (8) from this plant species has never been reported previously. The spectroscopic data of (7) is firstly described in this paper. Cytotoxic screening indicated that most of the pure compounds tested showed significant activity with (4) showing the most potent activity against HL-60 (human promyelocytic leukemia) and MCF-7 (human breast cancer) cell lines. However, all extracts and most of the pure compounds tested were found to be inactive against HT-29 (human colon cancer) and HeLa (human cervical cancer) cell lines. Similarly, none of the extracts or compounds showed activity in the antimicrobial testing. PMID:25057485

  1. Evaluation of inflorescence visitors as pollinators of Echinacea angustifolia (Asteraceae): comparison of techniques.

    PubMed

    Wist, Tyler J; Davis, Arthur R

    2013-10-01

    Inflorescences (heads or capitula) of the putative self-incompatible species, purple coneflower (Echinacea angustifolia (DC) Cronq. (Asteraceae)), were visited by insects representing the Coleoptera, Diptera, Hymenoptera, and Lepidoptera, in accordance with a generalist pollination syndrome. Measurement of the effectiveness of insect species as pollinators was accomplished by permitting solitary visits to receptive, central disc florets of virgin (previously bagged) heads. Four parameters were quantified: total stigmatic pollen load and proportion of pollen grains germinated, numbers of pollen tubes at style bases, and percentages of total receptive florets that had retracted (shrivelled) styles. Quantifying total and germinated pollen grains proved ineffective, partly owing to the tendency of self-pollen to initiate pollen tubes. The most effective pollinators were Apidae, especially bumble bees (Bombus spp.) and the European honey bee (Apis mellifera L.) (mean: 39 - 61% of styles retracted). Other noteworthy pollinators were cloudless sulfur butterflies (Phoebis sennae L.--Pieridae; mean 47% of style bases with pollen tubes), golden blister beetles (Epicauta ferruginea Say--Meloidae; 44%), and grasshopper bee flies (Systoechus vulgaris Loew--Bombyliidae; 22%). Sunflower leafcutter bees (Megachile pugnata Say) were less effective (4% of styles retracted). Promisingly, analysis of the proportion of retracted styles provided similar results to the established technique of pollen-tube quantification, but had the significant advantages of being completed more rapidly, without a microscope, and in the field. The quantitative technique of retracted-style analysis appears well suited for prompt measurement of inflorescence-visiting insects as pollinators of many asteraceans. PMID:24224247

  2. Linking Bacterial Endophytic Communities to Essential Oils: Clues from Lavandula angustifolia Mill.

    PubMed

    Emiliani, Giovanni; Mengoni, Alessio; Maida, Isabel; Perrin, Elena; Chiellini, Carolina; Fondi, Marco; Gallo, Eugenia; Gori, Luigi; Maggini, Valentina; Vannacci, Alfredo; Biffi, Sauro; Firenzuoli, Fabio; Fani, Renato

    2014-01-01

    Endophytic bacteria play a crucial role in plant life and are also drawing much attention for their capacity to produce bioactive compounds of relevant biotechnological interest. Here we present the characterisation of the cultivable endophytic bacteria of Lavandula angustifolia Mill.-a species used since antiquity for its therapeutic properties-since the production of bioactive metabolites from medical plants may reside also in the activity of bacterial endophytes through their direct production, PGPR activity on host, and/or elicitation of plant metabolism. Lavender tissues are inhabited by a tissue specific endophytic community dominated by Proteobacteria, highlighting also their difference from the rhizosphere environment where Actinobacteria and Firmicutes are also found. Leaves' endophytic community resulted as the most diverse from the other ecological niches. Overall, the findings reported here suggest: (i) the existence of different entry points for the endophytic community, (ii) its differentiation on the basis of the ecological niche variability, and (iii) a two-step colonization process for roots endophytes. Lastly, many isolates showed a strong inhibition potential against human pathogens and the molecular characterization demonstrated also the presence of not previously described isolates that may constitute a reservoir of bioactive compounds relevant in the field of pathogen control, phytoremediation, and human health. PMID:24971151

  3. Seasonal variations in the composition of the essential oils of Lavandula angustifolia (Lamiacae).

    PubMed

    Lakusić, Branislava; Lakusić, Dmitar; Ristić, Mihailo; Marcetić, Mirjana; Slavkovska, Violeta

    2014-06-01

    Seasonal variations in the composition of the essential oils obtained from the same individual (of the same genotype) of Lavandula angustifolia cultivated in Belgrade were determined by GC and GC/MS. The main constituents were 1,8-cineole (7.1-48.4%), linalool (0.1-38.7%), bomeol (10.9-27.7%), beta-phellandrene (0.5-21.2%) and camphor (1.5-15.8%). Cluster analysis showed that the 21 samples collected each month during the vegetation cycle were separable into three main clades with different compositions of essential oils. In the shoots with flowers, inflorescences and fruits of clade I, linalool is dominant, in the young leaves before flowering and old leaves of clade II, 1,8-cineole is dominant. In the young and incompletely developed leaves of clade III, beta-phellandrene is dominant. The composition of the essential oils of lavender depended on the plant part and the stage of development. PMID:25115100

  4. Phytoremediation potential of Cd and Zn by wetland plants, Colocasia esculenta L. Schott., Cyperus malaccensis Lam. and Typha angustifolia L. grown in hydroponics.

    PubMed

    Chayapan, P; Kruatrachue, M; Meetam, M; Pokethitiyook, P

    2015-09-01

    Cadmium and zinc phytoremediation potential of wetland plants, Colocasia esculenta, Cyperus malaccensis, and Typha angustifolia, was investigated. Plants were grown for 15 days in nutrient solutions containing various concentrations of Cd (0, 5, 10, 20, 50 mg l(-1)) and Zn (0, 10, 20, 50, 100 mg l(-1)). T angustifolia was tolerant to both metals as indicated by high RGR when grown in 50 mg I(-1) Cd and 100 mg I(-1) Zn solutions. All these plants accumulated more metals in their underground parts and > 100 mg kg(-1) in their aboveground with TF values < 1. Only C. esculenta could be considered a Zn hyperaccumulator because it could concentrate > 10,000 mg kg(-1) in its aboveground parts with TF > 1. T angustifolia exhibited highest biomass production and highest Cd and Zn uptake, confirming that this plant is a suitable candidate for treating of Cd contaminated soil/sediments. PMID:26521563

  5. A comparative study of efficacy of Tugaksheeree [Curcuma angustifolia Roxb. and Maranta arundinacea Linn.] in management of Amlapitta

    PubMed Central

    Rajashekhara, N.; Sharma, P. P.

    2010-01-01

    Amlapitta is a disease caused by increase of Amla Guna of Pitta. Starch obtained from the rhizomes of two plants viz., Curcuma angustifolia Roxb. (Fam. Zingiberaceae) and Maranta arundinacea Linn. (Fam. Marantaceae) are used as Tugaksheeree. In the present clinical study, the efficacy of Tugaksheeree was studied on 67 patients of Amlapitta. A 0 total of 84 patients suffering from Amlapitta were selected from the O.P.D. and I.P.D. sections in the department of Dravyaguna, I.P.G.T. and R.A., Hospital, Jamnagar, and were randomly divided into two groups. Thirty four patients completed the treatment course in Group I, and 33 patients completed the treatment course in Group II. The efficacy of drug Tugaksheeree was studied through internal administration of the starches of C. angustifolia Roxb. (Fam. Zingiberaceae) in Group I and M. arundinacea Linn. (Fam. Marantaceae) in Group II with the dose of 4 g TID with water for 30 days. Both the drugs were found highly effective in treating Amlapitta. They significantly relieved the cardinal symptoms viz., Avipaka, Tikta-amlodgara, Daha, Shoola, Chhardi and the associated symptoms viz., Aruchi, Gaurava, Udaradhmana, Antrakujana, Vit bheda, Shiroruja, Angasada, and Trit. Statistically significant increase in body weight was noticed in both the groups. This may be because the drugs corrected the Agni and acted as Brihmana and Dhatupushtikara. Both the drugs did not produce any side effects. Therefore, both these drugs (C. angustifolia Roxb. and M. arundinacea Linn.) can be used as substitutes for each other. PMID:22048544

  6. Polyamines, IAA and ABA during germination in two recalcitrant seeds: Araucaria angustifolia (Gymnosperm) and Ocotea odorifera (Angiosperm)

    PubMed Central

    Pieruzzi, Fernanda P.; Dias, Leonardo L. C.; Balbuena, Tiago S.; Santa-Catarina, Claudete; dos Santos, André L. W.; Floh, Eny I. S.

    2011-01-01

    Background and Aims Plant growth regulators play an important role in seed germination. However, much of the current knowledge about their function during seed germination was obtained using orthodox seeds as model systems, and there is a paucity of information about the role of plant growth regulators during germination of recalcitrant seeds. In the present work, two endangered woody species with recalcitrant seeds, Araucaria angustifolia (Gymnosperm) and Ocotea odorifera (Angiosperm), native to the Atlantic Rain Forest, Brazil, were used to study the mobilization of polyamines (PAs), indole-acetic acid (IAA) and abscisic acid (ABA) during seed germination. Methods Data were sampled from embryos of O. odorifera and embryos and megagametophytes of A. angustifolia throughout the germination process. Biochemical analyses were carried out in HPLC. Key Results During seed germination, an increase in the (Spd + Spm) : Put ratio was recorded in embryos in both species. An increase in IAA and PA levels was also observed during seed germination in both embryos, while ABA levels showed a decrease in O. odorifera and an increase in A. angustifolia embryos throughout the period studied. Conclusions The (Spd + Spm) : Put ratio could be used as a marker for germination completion. The increase in IAA levels, prior to germination, could be associated with variations in PA content. The ABA mobilization observed in the embryos could represent a greater resistance to this hormone in recalcitrant seeds, in comparison to orthodox seeds, opening a new perspective for studies on the effects of this regulator in recalcitrant seeds. The gymnosperm seed, though without a connective tissue between megagametophyte and embryo, seems to be able to maintain communication between the tissues, based on the likely transport of plant growth regulators. PMID:21685432

  7. Cardioprotective Effects of Essential Oil of Lavandula angustifolia on Isoproterenol-induced Acute Myocardial Infarction in Rat

    PubMed Central

    Ziaee, Mojtaba; Khorrami, Arash; Ebrahimi, Maryam; Nourafcan, Hassan; Amiraslanzadeh, Masoumeh; Rameshrad, Maryam; Garjani, Mehraveh; Garjani, Alireza

    2015-01-01

    Myocardial infarction (MI) is a common presentation of the ischemic heart disease. Lavandula angustifolia is an herbaceous plant with antioxidative effects. This study was designed to investigate the cardioprotective effects of lavandula angustifolia essential oil against isoproterenol-induced MI in rats. The dried sample was subjected to hydrodistillation by using a Clevenger and the oils were dried over anhydrous Na2SO4. Male Wistar rats were assigned to 6 groups of control, sham, isoproterenol and treatment with 5, 10, 20 mg/Kg of the essential oil. MI was induced by subcutaneous injection of Isoproterenol (100 mg/Kg) for 3 consecutive days at an interval of 24 h. The essential oil was given intraperitoneally every 24 h started at MI induction. Following anesthesia, hemodynamic parameters were measured. After sacrificing the animals, the hearts were removed to measure the heart to body weight ratio and histopathological examination. Myeloperoxidase (MPO) and Malondialdehyde (MDA) were measured in heart tissues for evaluating the activity of neutrophils and lipid peroxidation, respectively. The essential oil amended ECG pattern by suppressing ST-segment elevation and increasing R-amplitude. 10 mg/Kg of the essential oil significantly decreased heart to body weight ratio (P<0.001) and the elevation of MDA and MPO in myocardium, it also increased dp/dtmax from 2793 ± 210 to 4488 ± 253 mmHg/sec (P<0.001), and 20 mg/Kg of it significantly lowered LVEDP from 14 ± 3.43 to 4.3 ± 0.83 mmHg (P<0.001).The results demonstrated that L. angustifolia protects myocardium against isoproterenol-induced MI that it could be related to its antioxidant properties. PMID:25561934

  8. Toward establishing a morphological and ultrastructural characterization of proembryogenic masses and early somatic embryos of Araucaria angustifolia (Bert.) O. Kuntze.

    PubMed

    Steiner, Neusa; Farias-Soares, Francine L; Schmidt, Éder C; Pereira, Maria L T; Scheid, Bruna; Rogge-Renner, Gladys D; Bouzon, Zenilda L; Schmidt, Daniela; Maldonado, Sara; Guerra, Miguel P

    2016-03-01

    Somatic embryogenesis is a morphogenetic route useful for the study of embryonic development, as well as the large-scale propagation of endangered species, such as the Brazilian pine (Araucaria angustifolia). In the present study, we investigated the morphological and ultrastructural organization of A. angustifolia somatic embryo development by means of optical and electron microscopy. The proembryogenic stage was characterized by the proliferation of proembryogenic masses (PEMs), which are cellular aggregates composed of embryogenic cells (ECs) attached to suspensor-like cells (SCs). PEMs proliferate through three developmental stages, PEM I, II, and III, by changes in the number of ECs and SCs. PEM III-to-early somatic embryo (SE) transition was characterized by compact clusters of ECs growing out of PEM III, albeit still connected to it by SCs. Early SEs showed a dense globular embryonic mass (EM) and suspensor region (SR) connected by embryonic tube cells (TCs). By comparison, early somatic and zygotic embryos showed similar morphology. ECs are round with a large nucleus, nucleoli, and many cytoplasmic organelles. In contrast, TCs and SCs are elongated and vacuolated with cellular dismantling which is associated with programmed cell death of SCs. Abundant starch grains were observed in the TCs and SCs, while proteins were more abundant in the ECs. Based on the results of this study, a fate map of SE development in A. angustifolia is, for the first time, proposed. Additionally, this study shows the cell biology of SE development of this primitive gymnosperm which may be useful in evolutionary studies in this area. PMID:25968333

  9. A comparative study of efficacy of Tugaksheeree [Curcuma angustifolia Roxb. and Maranta arundinacea Linn.] in management of Amlapitta.

    PubMed

    Rajashekhara, N; Sharma, P P

    2010-10-01

    Amlapitta is a disease caused by increase of Amla Guna of Pitta. Starch obtained from the rhizomes of two plants viz., Curcuma angustifolia Roxb. (Fam. Zingiberaceae) and Maranta arundinacea Linn. (Fam. Marantaceae) are used as Tugaksheeree. In the present clinical study, the efficacy of Tugaksheeree was studied on 67 patients of Amlapitta. A 0 total of 84 patients suffering from Amlapitta were selected from the O.P.D. and I.P.D. sections in the department of Dravyaguna, I.P.G.T. and R.A., Hospital, Jamnagar, and were randomly divided into two groups. Thirty four patients completed the treatment course in Group I, and 33 patients completed the treatment course in Group II. The efficacy of drug Tugaksheeree was studied through internal administration of the starches of C. angustifolia Roxb. (Fam. Zingiberaceae) in Group I and M. arundinacea Linn. (Fam. Marantaceae) in Group II with the dose of 4 g TID with water for 30 days. Both the drugs were found highly effective in treating Amlapitta. They significantly relieved the cardinal symptoms viz., Avipaka, Tikta-amlodgara, Daha, Shoola, Chhardi and the associated symptoms viz., Aruchi, Gaurava, Udaradhmana, Antrakujana, Vit bheda, Shiroruja, Angasada, and Trit. Statistically significant increase in body weight was noticed in both the groups. This may be because the drugs corrected the Agni and acted as Brihmana and Dhatupushtikara. Both the drugs did not produce any side effects. Therefore, both these drugs (C. angustifolia Roxb. and M. arundinacea Linn.) can be used as substitutes for each other. PMID:22048544

  10. Cardioprotective Effects of Essential Oil of Lavandula angustifolia on Isoproterenol-induced Acute Myocardial Infarction in Rat.

    PubMed

    Ziaee, Mojtaba; Khorrami, Arash; Ebrahimi, Maryam; Nourafcan, Hassan; Amiraslanzadeh, Masoumeh; Rameshrad, Maryam; Garjani, Mehraveh; Garjani, Alireza

    2015-01-01

    Myocardial infarction (MI) is a common presentation of the ischemic heart disease. Lavandula angustifolia is an herbaceous plant with antioxidative effects. This study was designed to investigate the cardioprotective effects of lavandula angustifolia essential oil against isoproterenol-induced MI in rats. The dried sample was subjected to hydrodistillation by using a Clevenger and the oils were dried over anhydrous Na2SO4. Male Wistar rats were assigned to 6 groups of control, sham, isoproterenol and treatment with 5, 10, 20 mg/Kg of the essential oil. MI was induced by subcutaneous injection of Isoproterenol (100 mg/Kg) for 3 consecutive days at an interval of 24 h. The essential oil was given intraperitoneally every 24 h started at MI induction. Following anesthesia, hemodynamic parameters were measured. After sacrificing the animals, the hearts were removed to measure the heart to body weight ratio and histopathological examination. Myeloperoxidase (MPO) and Malondialdehyde (MDA) were measured in heart tissues for evaluating the activity of neutrophils and lipid peroxidation, respectively. The essential oil amended ECG pattern by suppressing ST-segment elevation and increasing R-amplitude. 10 mg/Kg of the essential oil significantly decreased heart to body weight ratio (P<0.001) and the elevation of MDA and MPO in myocardium, it also increased dp/dtmax from 2793 ± 210 to 4488 ± 253 mmHg/sec (P<0.001), and 20 mg/Kg of it significantly lowered LVEDP from 14 ± 3.43 to 4.3 ± 0.83 mmHg (P<0.001).The results demonstrated that L. angustifolia protects myocardium against isoproterenol-induced MI that it could be related to its antioxidant properties. PMID:25561934

  11. Hydrolates from lavender (Lavandula angustifolia)--their chemical composition as well as aromatic, antimicrobial and antioxidant properties.

    PubMed

    Prusinowska, Renata; Śmigielski, Krzysztof; Stobiecka, Agnieszka; Kunicka-Styczyńska, Alina

    2016-01-01

    It was shown that the method for obtaining hydrolates from lavender (Lavandula angustifolia) influences the content of active compounds and the aromatic, antimicrobial and antioxidant properties of the hydrolates. The content of volatile organic compounds ranged from 9.12 to 97.23 mg/100 mL of hydrolate. Lavender hydrolate variants showed low antimicrobial activity (from 0% to 0.05%). The radical scavenging activity of DPPH was from 3.6 ± 0.5% to 3.8 ± 0.6% and oxygen radical absorbance capacity (ORAC(FL)) results were from 0 to 266 μM Trolox equivalent, depending on the hydrolate variant. PMID:25738904

  12. Efficacy of Elaeagnus Angustifolia extract in the treatment of knee osteoarthritis: a randomized controlled trial.

    PubMed

    Panahi, Yunes; Alishiri, Gholam Hossein; Bayat, Noushin; Hosseini, Seyed Morteza; Sahebkar, Amirhossein

    2016-01-01

    Osteoarthritis (OA) is one of the most common musculoskeletal disorders all over the world. Available anti-arthritic medications have only partial efficacy and their long-term use is associated with adverse events. Elaeagnus Angustifolia (EA) is a medicinal plant with analgesic and anti-inflammatory properties. The present study evaluated the impact of two doses of EA extract compared with ibuprofen on the severity of disease in patients with knee OA. This study was designed as a randomized, double blind, active-controlled and parallel group trial. Patients with OA were randomized to receive 300 mg/day (n=33) or 600 mg/day (n=32) of EA aqueous extract, or 800 mg/day ibuprofen (n=32) for 7 weeks. EA extract contained 0.21 % (w/w) kaempferol according to HPLC. Efficacy of treatment was assessed using Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Visual Analogue Scale (VAS) of pain, Lequesne's Pain-Function Index (LPFI), and patient's global assessment (PGA) index. The amount of kaempferol in the extract was determined by HPLC method to be 0.21 % w/w. There were significant reductions in WOMAC, VAS, LPFI and PGA scores by the end of trial with all three interventions. Comparison of the changes in WOMAC, VAS and LPFI scores among the treatment groups did not reveal any significant difference between EA and ibuprofen, and between low and high doses of EA. EA was safe and well tolerated during the course of trial and no adverse event was reported. The present results suggest beneficial effects of aqueous EA extract in reducing the symptoms of OA with an efficacy comparable to that of ibuprofen. PMID:27330526

  13. Ecosystem Services and Potential Utilization of of Urban Typha angustifolia Wetlands of across Metropolitan Bangkok, Thailand

    NASA Astrophysics Data System (ADS)

    Sritrairat, S.

    2014-12-01

    Over half the world's 7.2 billion population are living in urban habitats. While these cities only occupy 2% of the world's surface, the ecological footprint by these cities combined is far greater than that of the other 98% of the world. Bangkok, Thailand has experienced this rapid urbanization that has resulted in various environmental problems, including pollution, land subsidence, and flooding. Major flooding in 2011 has raised awareness about the importance of restoring ecosystem services in urban space to cope up with the forecasted extreme climatic conditions. Finding localized flooding, carbon and pollution mitigation methods will be important to cities. Upland reforestration has been proposed as a way to decrease these anthropogenic and climate change impacts. However, there is also a large area of wetlands in Bangkok with possibly high ecosystem services that have not been quantified. This study measure above ground and below ground carbon accumulation in wide-spread Typha angustifolia wetlands as an untapped source of ecosystem services that are worth projected. These wetlands are typically viewed as wasteland and are not being protected. We examined carbon and heavy metals (Pb, Zn, Cu) pools in 7 wetlands across Bangkok with various environmental settings--from industrialized zone, to residential area, farms, and protected urban green space. The results indicate recent peat accumulation layer by these wetlands at high rate. Heavy concentration are found near contaminant source such as industries and farms. Combined with their ability to buffer storms and being habitats for wildlife, these wetlands have important values in increasing ecosystem services in urban space and should be considered for protection.

  14. Chemical composition and glycemic index of Brazilian pine (Araucaria angustifolia) seeds.

    PubMed

    Cordenunsi, Beatriz Rosana; De Menezes Wenzel, Elizabete; Genovese, Maria Inés; Colli, Célia; De Souza Gonçalves, Alessandra; Lajolo, Franco Maria

    2004-06-01

    The seeds of Parana pine (Araucaria brasiliensis syn. Araucaria angustifolia), named pinhão, are consumed after cooking and posterior dehulling, or they are used to prepare a flour employed in regional dishes. Native people that live in the South of Brazil usually consume baked pinhão. As a result of cooking, the white seeds become brown on the surface due to the migration of some tinted compounds present in the seed coat. In this work, the proximate composition, minerals, flavonoids, and glycemic index (GI) of cooked and raw pinhão seeds were compared. No differences in moisture, lipids, soluble fiber, and total starch after boiling were found. However, the soluble sugars and P, Cu, and Mg contents decreased, probably as a consequence of leaching in the cooking water. Also, the boiling process modified the profile of the phenolic compounds in the seeds. No flavonols were detected in raw pinhão seeds. The internal seed coat had a quercetin content five times higher than that of the external seed coat; also, quercetin migrated into the seed during cooking. The internal seed coat had a high content of total phenolics, and seeds cooked in normal conditions (with the seed coat) showed a total phenolics content five times higher than that of seeds cooked without the seed coat. Cooking was then extremely favorable to pinhão seeds bioactive compounds content. The carbohydrate availability was evaluated in a short-term assay in humans by the GI. The GI of pinhão seeds cooked with the coat (67%) was similar to that of the seeds cooked without a coat (62%) and lower than bread, showing that cooking does not interfere with starch availability. The low glycemic response can be partly due to its high content of resistant starch (9% of the total starch). PMID:15161207

  15. Efficacy of Elaeagnus Angustifolia extract in the treatment of knee osteoarthritis: a randomized controlled trial

    PubMed Central

    Panahi, Yunes; Alishiri, Gholam Hossein; Bayat, Noushin; Hosseini, Seyed Morteza; Sahebkar, Amirhossein

    2016-01-01

    Osteoarthritis (OA) is one of the most common musculoskeletal disorders all over the world. Available anti-arthritic medications have only partial efficacy and their long-term use is associated with adverse events. Elaeagnus Angustifolia (EA) is a medicinal plant with analgesic and anti-inflammatory properties. The present study evaluated the impact of two doses of EA extract compared with ibuprofen on the severity of disease in patients with knee OA. This study was designed as a randomized, double blind, active-controlled and parallel group trial. Patients with OA were randomized to receive 300 mg/day (n=33) or 600 mg/day (n=32) of EA aqueous extract, or 800 mg/day ibuprofen (n=32) for 7 weeks. EA extract contained 0.21 % (w/w) kaempferol according to HPLC. Efficacy of treatment was assessed using Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Visual Analogue Scale (VAS) of pain, Lequesne's Pain-Function Index (LPFI), and patient's global assessment (PGA) index. The amount of kaempferol in the extract was determined by HPLC method to be 0.21 % w/w. There were significant reductions in WOMAC, VAS, LPFI and PGA scores by the end of trial with all three interventions. Comparison of the changes in WOMAC, VAS and LPFI scores among the treatment groups did not reveal any significant difference between EA and ibuprofen, and between low and high doses of EA. EA was safe and well tolerated during the course of trial and no adverse event was reported. The present results suggest beneficial effects of aqueous EA extract in reducing the symptoms of OA with an efficacy comparable to that of ibuprofen. PMID:27330526

  16. Protein Drug Targets of Lavandula angustifolia on treatment of Rat Alzheimer's Disease.

    PubMed

    Zali, Hakimeh; Zamanian-Azodi, Mona; Rezaei Tavirani, Mostafa; Akbar-Zadeh Baghban, Alireza

    2015-01-01

    Different treatment strategies of Alzheimer's disease (AD) are being studied for treating or slowing the progression of AD. Many pharmaceutically important regulation systems operate through proteins as drug targets. Here, we investigate the drug target proteins in beta-amyloid (Aβ) injected rat hippocampus treated with Lavandula angustifolia (LA) by proteomics techniques. The reported study showed that lavender extract (LE) improves the spatial performance in AD animal model by diminishing Aβ production in histopathology of hippocampus, so in this study neuroprotective proteins expressed in Aβ injected rats treated with LE were scrutinized. Rats were divided into three groups including normal, Aβ injected, and Aβ injected that was treated with LE. Protein expression profiles of hippocampus tissue were determined by two-dimensional electrophoresis (2DE) method and dysregulated proteins such as Snca, NF-L, Hspa5, Prdx2, Apoa1, and Atp5a1were identified by MALDI-TOF/TOF. KEGG pathway and gene ontology (GO) categories were used by searching DAVID Bioinformatics Resources. All detected protein spots were used to determine predictedinteractions with other proteins in STRING online database. Different isoforms of important protein, Snca that exhibited neuroprotective effects by anti-apoptotic properties were expressed. NF-L involved in the maintenance of neuronal caliber. Hspa5 likewise Prdx2 displays as anti-apoptotic protein that Prdx2 also involved in the neurotrophic effects. Apoa1 has anti-inflammatory activity and Atp5a1, produces ATP from ADP. To sum up, these proteins as potential drug targets were expressed in hippocampus in response to effective components in LA may have therapeutic properties for the treatment of AD and other neurodegenerative diseases. PMID:25561935

  17. Partially acetylated chitosan oligo- and polymers induce an oxidative burst in suspension cultured cells of the gymnosperm Araucaria angustifolia.

    PubMed

    dos Santos, André Luis Wendt; El Gueddari, Nour Eddine; Trombotto, Stéphane; Moerschbacher, Bruno Maria

    2008-12-01

    Suspension-cultured cells were used to analyze the activation of defense responses in the conifer A. angustifolia , using as an elicitor purified chitosan polymers of different degrees of acetylation (DA 1-69%), chitin oligomers of different degrees of polymerization (DP 3-6), and chitosan oligomer of different DA (0-91%). Suspension cultured cells elicited with chitosan polymers reacted with a rapid and transient generation of H2O2, with chitosans of high DA (60 and 69%) being the most active ones. Chitosan oligomers of high DA (78 and 91%) induced substantial levels of H2O2, but fully acetylated chitin oligomers did not. When cultivated for 24-72 h in the presence of 1-10 microg mL(-1) chitosan (DA 69%), cell cultures did not show alterations in the levels of enzymes related to defense responses, suggesting that, in A. angustifolia , the induction of an oxidative burst is not directly coupled to the induction of other defense reactions. PMID:19053293

  18. Comparison of the diversity of root-associated bacteria in Phragmites australis and Typha angustifolia L. in artificial wetlands.

    PubMed

    Li, Yan Hong; Zhu, Jing Nan; Liu, Qun Fang; Liu, Yin; Liu, Min; Liu, Lei; Zhang, Qiang

    2013-08-01

    Common reed (Phragmites australis) and narrow-leaved cattail (Typha angustifolia L.) are two plant species used widely in artificial wetlands constructed to treat wastewater. In this study, the community structure and diversity of root-associated bacteria of common reed and narrow-leaved cattail growing in the Beijing Cuihu Wetland, China, were investigated using 16S rDNA library and PCR-denaturing gradient gel electrophoresis methods. Root-associated bacterial diversity was higher in common reed than in narrow-leaved cattail. In both plant species, the dominant root-associated bacterial species were Alpha, Beta and Gamma Proteobacteria, including the genera Aeromonas, Hydrogenophaga, Ideonella, Uliginosibacterium and Vogesella. Acidobacteria, Actinobacteria, Nitrospirae and Spirochaetes were only found in the roots of common reed. Comparing the root-associated bacterial communities of reed and cattail in our system, many more species of bacteria related involved in the total nitrogen cycle were observed in reed versus cattail, while species involved in total phosphorus and organic matter removal were mainly found in cattail. Although we cannot determine their nutrient removal capacity separately, differences in the root-associated bacterial communities may be an important factor contributing to the differing water purification effects mediated by T. angustifolia and P. australis wetlands. Thus, further work describing the ecosystem functions of these bacterial species is needed, in order to fully understand how effective common reed- and narrow-leaved cattail-dominated wetlands are for phytoremediation. PMID:23504190

  19. The In Vitro Antimicrobial Activity of Lavandula angustifolia Essential Oil in Combination with Other Aroma-Therapeutic Oils

    PubMed Central

    de Rapper, Stephanie; Kamatou, Guy; Viljoen, Alvaro

    2013-01-01

    The antimicrobial activity of Lavandula angustifolia essential oil was assessed in combination with 45 other oils to establish possible interactive properties. The composition of the selected essential oils was confirmed using GC-MS with a flame ionization detector. The microdilution minimum inhibitory concentration (MIC) assay was undertaken, whereby the fractional inhibitory concentration (ΣFIC) was calculated for the oil combinations. When lavender oil was assayed in 1 : 1 ratios with other oils, synergistic (26.7%), additive (48.9%), non-interactive (23.7%), and antagonistic (0.7%) interactions were observed. When investigating different ratios of the two oils in combination, the most favourable interactions were when L. angustifolia was combined with Cinnamomum zeylanicum or with Citrus sinensis, against C. albicans and S. aureus, respectively. In 1 : 1 ratios, 75.6% of the essential oils investigated showed either synergistic or additive results, lending in vitro credibility to the use of essential oil blends in aroma-therapeutic practices. Within the field of aromatherapy, essential oils are commonly employed in mixtures for the treatment of infectious diseases; however, very little evidence exists to support the use in combination. This study lends some credence to the concomitant use of essential oils blended with lavender. PMID:23737850

  20. The periodic wetting of leaves enhances water relations and growth of the long-lived conifer Araucaria angustifolia.

    PubMed

    Cassana, F F; Dillenburg, L R

    2013-01-01

    The importance of foliar absorption of water and atmospheric solutes in conifers was recognised in the 1970s, and the importance of fog as a water source in forest environments has been recently demonstrated. Araucaria angustifolia (Araucariaceae) is an emergent tree species that grows in montane forests of southern Brazil, where rainfall and fog are frequent events, leading to frequent wetting of the leaves. Despite anatomical evidence in favour of leaf water absorption, there is no information on the existence and physiological significance of a such process. In this study, we test the hypothesis that the use of atmospheric water by leaves takes place and is physiologically relevant for the species, by comparing growth, water relations and nutritional status between plants grown under two conditions of soil water (well-watered and water-stressed plants) and three types of leaf spraying (none, water and nutrient solution spray). Leaf spraying had a greater effect in improving plant water relations when plants were under water stress. Plant growth was more responsive to water available to the leaves than to the roots, and was equally increased by both types of leaf spraying, with no interaction with soil water status. Spraying leaves with nutrient solution increased shoot ramification and raised the concentrations of N, P, K, Zn, Cu and Fe in the roots. Our results provide strong indications that water and nutrients are indeed absorbed by leaves of A. angustifolia, and that this process might be as important as water uptake by its roots. PMID:22672733

  1. Growing environment and nutrient availability affect the content of some phenolic compounds in Echinacea purpurea and Echinacea angustifolia.

    PubMed

    Zheng, Youbin; Dixon, Mike; Saxena, Praveen K

    2006-12-01

    Medicinal plant production is different from other agricultural production systems in that the plants are grown for the production of specific phytochemical(s) for human use. To address this need, a Good Manufacturing Practice (GMP)-compliant, controlled-environment production system was developed for production of Echinacea purpurea and Echinacea angustifolia. Within the prototype facility, the growing systems, nutrient availability, water and physical environment were highly controlled. The current study was designed to evaluate the effects of different hydroponic systems, nutrient solution NO (3)(-)/NH (4)(+) ratios and mild water stress on the content of some phenolic compounds in Echinacea plants. The deep-flow solution culture system in which the plant roots were continuously immersed in the nutrient solutions was optimum for the growth of E. purpurea. Higher concentrations of caftaric acid, cynarin and echinacoside were produced in E. angustifolia plants grown in the soil-based growing media while the plants grown in the deep-flow solution system had higher levels of cichoric acid. Altering the NO (3)(-)/NH (4)(+) ratio or limited water stress did not have any significant effect on the phytochemical content of Echinacea plants. Echinacea plants grown in the controlled environment systems had higher or similar amounts of cynarin, caftaric acid, echinacoside and cichoric acid as previously reported in the literature for both field-cultivated and wild-harvested Echinacea plants. This growing system offers the advantages of year-round crop production with minimal contamination by environmental pollutants and common microbes. PMID:17054043

  2. Identification and Evaluation of Reference Genes for Quantitative Analysis of Brazilian Pine (Araucaria angustifolia Bertol. Kuntze) Gene Expression

    PubMed Central

    Almeida, Juliana; Mosini, Amanda C.; dos Santos, André L. W.; Rossi, Magdalena; Floh, Eny I. S.

    2015-01-01

    Quantitative analysis of gene expression is a fundamental experimental approach in many fields of plant biology, but it requires the use of internal controls representing constitutively expressed genes for reliable transcript quantification. In this study, we identified fifteen putative reference genes from an A. angustifolia transcriptome database. Variation in transcript levels was first evaluated in silico by comparing read counts and then by quantitative real-time PCR (qRT-PCR), resulting in the identification of six candidate genes. The consistency of transcript abundance was also calculated applying geNorm and NormFinder software packages followed by a validation approach using four target genes. The results presented here indicate that a diverse set of samples should ideally be used in order to identify constitutively expressed genes, and that the use of any two reference genes in combination, of the six tested genes, is sufficient for effective expression normalization. Finally, in agreement with the in silico prediction, a comprehensive analysis of the qRT-PCR data combined with validation analysis revealed that AaEIF4B-L and AaPP2A are the most suitable reference genes for comparative studies of A. angustifolia gene expression. PMID:26313945

  3. Phytoextraction, phytotransformation and rhizodegradation of ibuprofen associated with Typha angustifolia in a horizontal subsurface flow constructed wetland.

    PubMed

    Li, Yifei; Zhang, Jiefeng; Zhu, Guibing; Liu, Yu; Wu, Bing; Ng, Wun Jern; Appan, Adhityan; Tan, Soon Keat

    2016-10-01

    Widespread occurrence of trace pharmaceutical residues in aquatic environments is of great concerns due to the potential chronic toxicity of certain pharmaceuticals including ibuprofen on aquatic organisms even at environmental levels. In this study, the phytoextraction, phytotransformation and rhizodegradation of ibuprofen associated with Typha angustifolia were investigated in a horizontal subsurface flow constructed wetland system. The experimental wetland system consisted of a planted bed with Typha angustifolia and an unplanted bed (control) to treat ibuprofen-loaded wastewater (∼107.2 μg L(-1)). Over a period of 342 days, ibuprofen was accumulated in leaf sheath and lamina tissues at a mean concentration of 160.7 ng g(-1), indicating the occurrence of the phytoextraction of ibuprofen. Root-uptake ibuprofen was partially transformed to ibuprofen carboxylic acid, 2-hydroxy ibuprofen and 1-hydroxy ibuprofen which were found to be 1374.9, 235.6 and 301.5 ng g(-1) in the sheath, respectively, while they were 1051.1, 693.6 and 178.7 ng g(-1) in the lamina. The findings from pyrosequencing analysis of the rhizosphere bacteria suggest that the Dechloromonas sp., the Clostridium sp. (e.g. Clostridium saccharobutylicum), the order Sphingobacteriales, and the Cytophaga sp. in the order Cytophagales were most probably responsible for the rhizodegradation of ibuprofen. PMID:27372652

  4. Indole-3-acetic acid producing root-associated bacteria on growth of Brazil Pine (Araucaria angustifolia) and Slash Pine (Pinus elliottii).

    PubMed

    Gumiere, Thiago; Ribeiro, Carlos Marcelo; Vasconcellos, Rafael Leandro Figueiredo; Cardoso, Elke Jurandy Bran Nogueira

    2014-04-01

    Araucaria forests in Brazil today correspond to only 0.7 % of the original 200 km(2) of natural forest that covered a great part of the southern and southeastern area of the Atlantic Forest and, although Araucaria angustifolia is an endangered species, illegal exploitation is still going on. As an alternative to the use of hardwoods, Pinus elliottii presents rapid growth and high tolerance to climatic stress and low soil fertility or degraded areas. Thus, the objective of this study was to evaluate the effect of IAA-producing bacteria on the development of A. angustifolia and P. elliottii. We used five bacterial strains previously isolated from the rhizosphere of A. angustifolia, which produce quantities of IAA ranging from 3 to 126 μg mL(-1). Microbiolized seeds were sown in a new gnotobiotic system developed for this work, that allowed the quantification of the plant hormone IAA produced by bacteria, and the evaluation of its effect on seedling development. Also, it was shown that P. elliottii roots were almost as satisfactory as hosts for these IAA producers as A. angustifolia, while different magnitudes of mass increases were found for each species. Thus, we suggest that these microbial groups can be helpful for the development and reestablishment of already degraded forests and that PGPR isolated from Araucaria rhizosphere have the potential to be beneficial in seedling production of P. elliottii. Another finding is that our newly developed gnotobiotic system is highly satisfactory for the evaluation of this effect. PMID:24481491

  5. Contact dermatitis as an adverse reaction to some topically used European herbal medicinal products - part 2: Echinacea purpurea-Lavandula angustifolia.

    PubMed

    Gangemi, Sebastiano; Minciullo, Paola L; Miroddi, Marco; Chinou, Ioanna; Calapai, Gioacchino; Schmidt, Richard J

    2015-04-01

    This review focuses on contact dermatitis as an adverse effect of a selection of topically used herbal medicinal products for which the European Medicines Agency has completed an evaluation up to the end of November 2013 and for which a Community herbal monograph has been produced. Part 2: Echinacea purpurea Moench-Lavandula angustifolia Mill. PMID:25600644

  6. Echinacea species (Echinacea angustifolia (DC.) Hell., Echinacea pallida (Nutt.) Nutt.,Echinacea purpurea (L.) Moench): a review of their chemistry, pharmacology and clinical properties.

    PubMed

    Barnes, Joanne; Anderson, Linda A; Gibbons, Simon; Phillipson, J David

    2005-08-01

    This paper reviews the chemistry, pharmacology and clinical properties of Echinacea species used medicinally. The Echinacea species Echinacea angustifolia, Echinacea pallida and Echinacea purpurea have a long history of medicinal use for a variety of conditions, particularly infections, and today echinacea products are among the best-selling herbal preparations in several developed countries. Modern interest in echinacea is focused on its immunomodulatory effects, particularly in the prevention and treatment of upper respiratory tract infections. The chemistry of Echinacea species is well documented, and several groups of constituents, including alkamides and caffeic acid derivatives, are considered important for activity. There are, however, differences in the constituent profile of the three species. Commercial echinacea samples and marketed echinacea products may contain one or more of the three species, and analysis of samples of raw material and products has shown that some do not meet recognized standards for pharmaceutical quality. Evidence from preclinical studies supports some of the traditional and modern uses for echinacea, particularly the reputed immunostimulant (or immunomodulatory) properties. Several, but not all, clinical trials of echinacea preparations have reported effects superior to those of placebo in the prevention and treatment of upper respiratory tract infections. However, evidence of efficacy is not definitive as studies have included different patient groups and tested various different preparations and dosage regimens of echinacea. On the basis of the available limited safety data, echinacea appears to be well tolerated. However, further investigation and surveillance are required to establish the safety profiles of different echinacea preparations. Safety issues include the possibility of allergic reactions, the use of echinacea by patients with autoimmune diseases and the potential for echinacea preparations to interact with

  7. TUBERCULOSIS COMO ENFERMEDAD OCUPACIONAL

    PubMed Central

    Mendoza-Ticona, Alberto

    2014-01-01

    Existe evidencia suficiente para declarar a la tuberculosis como enfermedad ocupacional en diversos profesionales especialmente entre los trabajadores de salud. En el Perú están normados y reglamentados los derechos laborales inherentes a la tuberculosis como enfermedad ocupacional, como la cobertura por discapacidad temporal o permanente. Sin embargo, estos derechos aún no han sido suficientemente socializados. En este trabajo se presenta información sobre el riesgo de adquirir tuberculosis en el lugar de trabajo, se revisan las evidencias para declarar a la tuberculosis como enfermedad ocupacional en trabajadores de salud y se presenta la legislación peruana vigente al respecto. PMID:22858771

  8. Indole Alkaloids of Alstonia angustifolia var. latifolia as Green Inhibitor for Mild Steel Corrosion in 1 M HCl Media

    NASA Astrophysics Data System (ADS)

    Raja, Pandian Bothi; Qureshi, Ahmad Kaleem; Rahim, Afidah Abdul; Awang, Khalijah; Mukhtar, Mat Ropi; Osman, Hasnah

    2013-04-01

    The inhibition effect of mild steel (MS) corrosion in 1 M HCl was studied by the addition of indole alkaloids (crude) isolated from Alstonia angustifolia var. latifolia ( A. latifolia) leaves at 303 K. Potentiodynamic polarization, impedance spectroscopy, scanning electron microscopy (SEM), and Fourier transform infrared (FTIR) analyses were used for this study. Results show that the isolated alkaloid extract of A. latifolia is a good inhibitor and exhibited maximum inhibition efficiency (above 80%) at concentrations between 3 and 5 mg/L. Polarization measurements indicated that the inhibitor does not alter the mechanism of either anodic or cathodic reactions and acted as mixed-type inhibitor. The inhibition efficiencies of both electrochemical techniques are found to be in good agreement and adsorption of inhibitor follows Langmuir isotherm. Adsorption of inhibitor over metal surface was well supported by the SEM studies, while FTIR studies evidenced the presence of indole alkaloids as green inhibitor that reduces the rate of corrosion.

  9. Nuclear and mitochondrial genome instability induced by senna (Cassia angustifolia Vahl.) aqueous extract in Saccharomyces cerevisiae strains.

    PubMed

    Silva, C R; Caldeira-de-Araújo, A; Leitão, A C; Pádula, M

    2014-01-01

    Cassia angustifolia Vahl. (senna) is commonly used in self-medication and is frequently used to treat intestine constipation. A previous study involving bacteria and plasmid DNA suggested the possible toxicity of the aqueous extract of senna (SAE). The aim of this study was to extend the knowledge concerning SAE genotoxicity mechanisms because of its widespread use and its risks to human health. We investigated the impact of SAE on nuclear DNA and on the stability of mitochondrial DNA in Saccharomyces cerevisiae (wt, ogg1, msh6, and ogg1msh6) strains, monitoring the formation of petite mutants. Our results demonstrated that SAE specifically increased Can(R) mutagenesis only in the msh6 mutant, supporting the view that SAE can induce misincorporation errors in DNA. We observed a significant increase in the frequency of petite colonies in all studied strains. Our data indicate that SAE has genotoxic activity towards both mitochondrial and nuclear DNA. PMID:25501195

  10. Fabrication and Characterization of Sansevieria trifasciata, Pandanus amaryllifolius and Cassia angustifolia as Photosensitizer for Dye Sensitized Solar Cells

    NASA Astrophysics Data System (ADS)

    Cari; Supriyanto, Agus; Mahfudli Fadli, Ulfa; Bayu Prasada, Ashari

    2016-04-01

    Dye sensitized Solar Cells (DSSC) is one of the electric cells photochemical consisting of photoelectrode, dye, counter electrode, and electrolyte. The aims of the research to determine of the optical and electrical characteristic of the extract Sansevieria trifasciata, Pandanus amaryllifolius, and Cassia angustifolia. The study is also aimed to determine the effect of natural dyes extract to increase the efficiency of solar cells based DSSC. Sandwich structures formed in the sample consisted of working electrode pair Titanium dioxide (TiO2) and the counter electrode platinum (Pt). Dye extraction process is performed by stirring for 1 hour and then allowed to stand for 24 hours. Absorbance test is measure by using UV-Vis spectrophotometer Lambda 25, conductivity test by using a two-point probes Elkahfi 100, and characterization of current and voltage (I-V) by using a Keithley 2602A. The results showed that the greatest efficiency of 0.160% at Dye Pandanus amaryllifolius.

  11. Identification and nanoentrapment of polyphenolic phytocomplex from Fraxinus angustifolia: in vitro and in vivo wound healing potential.

    PubMed

    Moulaoui, Kenza; Caddeo, Carla; Manca, Maria Letizia; Castangia, Ines; Valenti, Donatella; Escribano, Elvira; Atmani, Djebbar; Fadda, Anna Maria; Manconi, Maria

    2015-01-01

    The aim of the present study was to elucidate the polyphenolic composition of Fraxinus angustifolia leaf and bark extracts, and to evaluate their efficacy in wound healing. Quercetin, catechin, rutin and tannic acid were identified as the main components of the extracts. In order to improve their skin bioavailability, the polyphenolic phytocomplexes were incorporated in different nanovesicles, namely ethosomes and phospholipid vesicles containing Transcutol(®) P (Trc) or ethylene glycol (EG). The latter had never been used before as a component of phospholipid vesicles, and it was found to play a key role in improving extract efficacy in wound healing. Results of cryogenic transmission electron microscopy (cryo-TEM), Photon Correlation Spectroscopy (PCS) and Small-Angle X-ray Scattering (SAXS) showed that ethosomes and EG-PEVs were small, monodispersed, unilamellar vesicles, while Trc-PEVs were larger, less homogeneously dispersed and multilamellar, with a large bilayer thickness. Free extracts did not show relevant ability to protect in vitro human keratinocytes from H2O2 damages, while when entrapped in nanovesicles, they significantly inhibited H2O2 stress damages, probably related to a higher level of cell uptake. On the other hand, in vivo results showed that the highest antioxidant and anti-inflammatory effects were provided by the phytocomplexes in EG-PEVs, which favoured wound healing. Moreover, non-entrapped F. angustifolia extracts showed a marginal effect, comparable to that of free quercetin dispersion (control). In conclusion, our results depict that these extracts may find potential applications in biomedicine. PMID:25462238

  12. Effects of Elaeagnus angustifolia L. on Lipid Profile and Atherogenic Indices in Obese Females: A Randomized Controlled Clinical Trial.

    PubMed

    Nikniaz, Zeinab; Mahdavi, Reza; Nikniaz, Leila; Ebrahimi, Aliasghar; Ostadrahimi, Alireza

    2016-11-01

    In the present randomized double-blinded placebo-controlled study, the effect of Elaeagnus angustifolia L. (EA) whole fruit and medulla powders on anthropometric indices, serum lipid profile, and atherogenic indices in females with knee osteoarthritis (OA) was investigated. Ninety females with mild to moderate knee osteoarthritis were randomly assigned to one of three groups-medulla powder, whole fruit powder, or placebo. The subjects received 15 g/day of medulla powder of EA, whole fruit powder of EA, or placebo. Lipid profile, weight, and dietary intake were measured at baseline and at the end of the study. Body mass index and atherogenic indices were calculated. Statistical analysis was performed using SPSS version 13.0, and Paired t tests, analysis of variance (ANOVA), analysis of covariance (ANCOVA), and the Tukey post hoc test were used to compare within-group and between-group values. After 8 weeks of supplementations, compared with the baseline, significant reductions in total cholesterol (TC), low density lipoprotein/high density lipoprotein (LDL/HDL), and TC/HDL ratios were observed in the two supplemented groups; however, the reduction of these values was not statistically significant in the placebo group. There were significant differences between the patients who received medulla powder and placebo group in the case of changes in TC/HDL and LDL/HDL ratios (p < .001). However, no significant differences were found between the two supplemented groups in the case of changes in studied values (p > .05). Generally, whole fruit and medulla powders of Elaeagnus angustifolia L. had positive effects, especially in decreasing total cholesterol and atherogenic indices in females with knee OA. PMID:26930244

  13. [Identification of original plants of uyghur medicinal materials fructus elaeagni using morphological characteristics and DNA barcode].

    PubMed

    Wang, Guo-Ping; Fan, Cong-Zhao; Zhu, Jun; Li, Xiao-Jin

    2014-06-01

    Morphology and molecular identification technology were used to identify 3 original plants of Fructus Elaeagni which was commonly used in Uygur medicine. Leaves, flowers and fruits from different areas were selected randomly for morphology research. ITS2 sequence as DNA barcode was used to identify 17 samples of Fructus Elaeagni. The genetic distances were computed by kimura 2-parameter (K2P) model, and the Neighbor-Joining (NJ) and Maximum Likelihood phylogenetic trees were constructed using MEGA5.0. The results showed that Elaeagnus angustifolia, E. oxycarpa and E. angustifolia var. orientalis cannot be distinguished by morphological characteristics of leaves, flowers and fruits. The sequence length of ITS2 ranged from 220 to 223 bp, the average GC content was 61.9%. The haplotype numbers of E. angustifolia, E. oxycarpa and E. angustifolia var. orientals were 4, 3, 3, respectively. The results from the NJ tree and ML tree showed that the 3 original species of Fructus Elaeagni cannot be distinguished obviously. Therefore, 3 species maybe have the same origin, and can be used as the original plant of Uygur medicineal material Fructus Elaeagni. However, further evidence of chemical components and pharmacological effect were needed. PMID:25244748

  14. The effects of aqueous extract of Lavandula angustifolia flowers in glutamate-induced neurotoxicity of cerebellar granular cell culture of rat pups.

    PubMed

    Büyükokuroğlu, Mehmet Emin; Gepdiremen, Akçahan; Hacimüftüoğlu, Ahmet; Oktay, Münir

    2003-01-01

    In the present study, neuroprotective effect of Lavandula angustifolia flower aqueous extract in glutamate-induced neurotoxicity in rat pups cerebellar granular cell culture was investigated. The extract at doses of 10 microg ml(-1), 100 microg ml(-1), 1 mg ml(-1) and 10 mg ml(-1) was applied to culture flasks. The extract at doses of 100 microg ml(-1) and 1 mg ml(-1) significantly blocked glutamate-induced neurotoxicity, with the most effective dose being 1 mg ml(-1). On the other hand, 10 mg ml(-1) dose of extract increased the dead cell with respect to glutamate group, despite being found insignificant statistically. As a result, L. angustifolia protected the neurons against glutamate toxicity. PMID:12499081

  15. Mps1 (Monopolar Spindle 1) Protein Inhibition Affects Cellular Growth and Pro-Embryogenic Masses Morphology in Embryogenic Cultures of Araucaria angustifolia (Araucariaceae)

    PubMed Central

    Douétts-Peres, Jackellinne C.; Cruz, Marco Antônio L.; Reis, Ricardo S.; Heringer, Angelo S.; de Oliveira, Eduardo A. G.; Elbl, Paula M.; Floh, Eny I. S.; Silveira, Vanildo

    2016-01-01

    Somatic embryogenesis has been shown to be an efficient tool for studying processes based on cell growth and development. The fine regulation of the cell cycle is essential for proper embryo formation during the process of somatic embryogenesis. The aims of the present work were to identify and perform a structural and functional characterization of Mps1 and to analyze the effects of the inhibition of this protein on cellular growth and pro-embryogenic mass (PEM) morphology in embryogenic cultures of A. angustifolia. A single-copy Mps1 gene named AaMps1 was retrieved from the A. angustifolia transcriptome database, and through a mass spectrometry approach, AaMps1 was identified and quantified in embryogenic cultures. The Mps1 inhibitor SP600125 (10 μM) inhibited cellular growth and changed PEMs, and these effects were accompanied by a reduction in AaMps1 protein levels in embryogenic cultures. Our work has identified the Mps1 protein in a gymnosperm species for the first time, and we have shown that inhibiting Mps1 affects cellular growth and PEM differentiation during A. angustifolia somatic embryogenesis. These data will be useful for better understanding cell cycle control during somatic embryogenesis in plants. PMID:27064899

  16. The Effect of Plant Inbreeding and Stoichiometry on Interactions with Herbivores in Nature: Echinacea angustifolia and Its Specialist Aphid

    PubMed Central

    Wagenius, Stuart; Stanton-Geddes, John; Shaw, Ruth G.

    2011-01-01

    Fragmentation of once widespread communities may alter interspecific interactions by changing genetic composition of interacting populations as well as their abundances and spatial distributions. In a long-term study of a fragmented population of Echinacea angustifolia, a perennial plant native to the North American prairie, we investigated influences on its interaction with a specialist aphid and tending ants. We grew plant progeny of sib-matings (I), and of random pairings within (W) and between (B) seven remnants in a common field within 8 km of the source remnants. During the fifth growing season, we determined each plant's burden of aphids and ants, as well as its size and foliar elemental composition (C, N, P). We also assayed composition (C, N) of aphids and ants. Early in the season, progeny from genotypic classes B and I were twice as likely to harbor aphids, and in greater abundance, than genotypic class W; aphid loads were inversely related to foliar concentration of P and positively related to leaf N and plant size. At the end of the season, aphid loads were indistinguishable among genotypic classes. Ant abundance tracked aphid abundance throughout the season but showed no direct relationship with plant traits. Through its potential to alter the genotypic composition of remnant populations of Echinacea, fragmentation can increase Echinacea's susceptibility to herbivory by its specialist aphid and, in turn, perturb the abundance and distribution of aphids. PMID:21935460

  17. Essential Oil from Flowers and Leaves of Elaeagnus Angustifolia (Elaeagnaceae): Composition, Radical Scavenging and General Toxicity Activities

    PubMed Central

    Torbati, Mohammadali; Asnaashari, Solmaz; Heshmati Afshar, Fariba

    2016-01-01

    Purpose: The aim of this work was to identify the chemical composition of the essential oils obtained from the flowers and leaves of Elaeagnus angostifolia (Elaeagnaceae) along with evaluate the radical scavenging and general toxicity activities. Methods: A combination of GC-MS and GC-FID were utilized for analyzing the chemical profile of the essential oils extracted by hydro-distillation from the leaves and flowers of E. angustifolia. The essential oils were subjected to general toxicity and radical scavenging assays using brine shrimp lethality test and DPPH method, respectively. Results: In total, 53 and 25 components were identified and quantified in the essential oils of flowers and leaves, accounting for 96.59% and 98.97% of the oil, respectively. The both oils were observed to be rich in ester compounds. The most abundant components of the oil from flowers were E-ethyl cinnamate (60.00%), hexahydrofarnesyl acetone (9.99%), palmitic acid (5.20%) and phytol (3.29%). The major constituents of the oil from leaves were E-ethyl cinnamate (37.27%), phytol (12.08%), nonanal (10.74%) and Z-3-hexenyl benzoate (7.65%). Both oils showed moderate activity in DPPH assay; however, they exhibited potent tocixity in brine shrimp lethality test. Conclusion: The remarkable toxicity effects of the oils are worthy to further investigation to find the probable mechanisms of action accountable for the noticeable toxic effect of these essential oils. PMID:27478777

  18. Effect of N and NPK fertilizers on early field performance of narrow-leaved ash, Fraxinus angustifolia.

    PubMed

    Cicek, Emrah; Yilmaz, Faruk; Yilmaz, Murat

    2010-01-01

    The effect of fertilization in the first growing season on early survival and growth of narrow-leaved ash (NLA) (Fraxinus angustifolia ssp. oxycarpa) was evaluated throughout the first 3 years of growth in Adapazari, Turkey. A randomized complete block design with four replications was established to investigate fertilization effects. Granular N urea [46%, (NH2)2CO, NH2-N] and NPK (15/15/15%; NH3-N, P2O5, K2O) fertilizers were applied in mid-May of the first growing season. Fertilization treatments per tree were control, 67 g NPK (equal to 10/10/10 g N/P2O5 /K2O tree(-1)), 133 g NPK (20/20/20 g N/P2O5 /K2O tree(-1)), 33 g urea N (15 g N tree(-1)) and 54 g urea N (25 g N tree(-1)). After three growing seasons under these fertilizer treatments, 98% of trees were still viable. Compared to the control treatment, fertilization had a large and positive effect on diameter and height growth during the first 3 years of growth. However, since there were no significant differences among the fertilized plots in terms of tree diameter and height growth, addition of P and K to the fertilizer regime was not beneficial. The results show that N fertilization in the first growing season has the potential to improve early field growth of narrow-leaved ash. PMID:20648820

  19. Biochemical composition and antioxidant properties of Lavandula angustifolia Miller essential oil are shielded by propolis against UV radiations.

    PubMed

    Gismondi, Angelo; Angelo, Gismondi; Canuti, Lorena; Lorena, Canuti; Grispo, Marta; Marta, Grispo; Canini, Antonella; Antonella, Canini

    2014-01-01

    UV radiations are principal causes of skin cancer and aging. Suntan creams were developed to protect epidermis and derma layers against photodegradation and photooxidation. The addition of antioxidant plant extracts (i.e. essential oil) to sunscreens is habitually performed, to increase their UV protective effects and to contrast pro-radical and cytotoxic compounds present in these solutions. According to these observations, in the present work, the alteration of chemical composition and bioactive properties of Lavandula angustifolia Miller essential oil, exposed to UV light, was investigated. UV induced a significant deterioration of lavender oil biochemical profile. Moreover, the antioxidant activity of this solution, in in vitro tests and directly on B16-F10 melanoma cells, greatly decreased after UV treatment. Our results also showed that essential oil was shielded from UV stress by propolis addition. Even after UV treatment, bee glue highly protected lavender oil secondary metabolites from degradation and also preserved their antiradical properties, both in in vitro antioxidant assays and in cell oxidative damage evaluations. This research proposed propolis as highly efficient UV protective and antiradical additive for sunscreens, cosmetics and alimentary or pharmaceutical products containing plant extracts. PMID:24372191

  20. [The seeds of Campsiandra angustifolia (Fabaceae: Caesalpiniodeae) as a reflex of selective pressures on dispersal and establishment].

    PubMed

    Farji-Brener, Alejandro G; Durán, Sandra; Valerio, Alejandro; Herbas, Estela; Castañeda, Mario; Ochoa, José; Romo, Mónica

    2005-01-01

    We indirectly evaluated the selective pressures on dispersal and establishment of Campsiandra angustifolia, a common water-dispersed tree from the Peruvian Amazon, analyzing the variation in the relationship between the volume occupied by dispersal and establishment structures in a total of 535 seeds from 13 trees located at three different habitats. The seeds differed one order of magnitude in their total volume. However, independently of their size and the location of the maternal tree, the relationship between the volume occupied by dispersal and establishment structures was relatively constant (approximately 1) and showed a normal distribution with low skewness, indicating stabilizing selection. These results suggest that, in the habitats studied, dispersal and establishment processes may have similar importance to C. agustifolia. In species with seeds confined in pods, and therefore strongly space-limited, the relative volume of their seeds occupied by dispersal and establishment structures could be a better measure of the trade-off between these two processes than the variation in seed size. PMID:17354420

  1. ANGUSTIFOLIA3 Binds to SWI/SNF Chromatin Remodeling Complexes to Regulate Transcription during Arabidopsis Leaf Development[W

    PubMed Central

    Vercruyssen, Liesbeth; Verkest, Aurine; Gonzalez, Nathalie; Heyndrickx, Ken S.; Eeckhout, Dominique; Han, Soon-Ki; Jégu, Teddy; Archacki, Rafal; Van Leene, Jelle; Andriankaja, Megan; De Bodt, Stefanie; Abeel, Thomas; Coppens, Frederik; Dhondt, Stijn; De Milde, Liesbeth; Vermeersch, Mattias; Maleux, Katrien; Gevaert, Kris; Jerzmanowski, Andrzej; Benhamed, Moussa; Wagner, Doris; Vandepoele, Klaas; De Jaeger, Geert; Inzé, Dirk

    2014-01-01

    The transcriptional coactivator ANGUSTIFOLIA3 (AN3) stimulates cell proliferation during Arabidopsis thaliana leaf development, but the molecular mechanism is largely unknown. Here, we show that inducible nuclear localization of AN3 during initial leaf growth results in differential expression of important transcriptional regulators, including GROWTH REGULATING FACTORs (GRFs). Chromatin purification further revealed the presence of AN3 at the loci of GRF5, GRF6, CYTOKININ RESPONSE FACTOR2, CONSTANS-LIKE5 (COL5), HECATE1 (HEC1), and ARABIDOPSIS RESPONSE REGULATOR4 (ARR4). Tandem affinity purification of protein complexes using AN3 as bait identified plant SWITCH/SUCROSE NONFERMENTING (SWI/SNF) chromatin remodeling complexes formed around the ATPases BRAHMA (BRM) or SPLAYED. Moreover, SWI/SNF ASSOCIATED PROTEIN 73B (SWP73B) is recruited by AN3 to the promoters of GRF5, GRF3, COL5, and ARR4, and both SWP73B and BRM occupy the HEC1 promoter. Furthermore, we show that AN3 and BRM genetically interact. The data indicate that AN3 associates with chromatin remodelers to regulate transcription. In addition, modification of SWI3C expression levels increases leaf size, underlining the importance of chromatin dynamics for growth regulation. Our results place the SWI/SNF-AN3 module as a major player at the transition from cell proliferation to cell differentiation in a developing leaf. PMID:24443518

  2. Inhibitory Effect of Dodonaea viscosa var. angustifolia on the Virulence Properties of the Oral Pathogens Streptococcus mutans and Porphyromonas gingivalis

    PubMed Central

    Owotade, Foluso John

    2013-01-01

    Aim. This study investigated the effect of Dodonaea viscosa var. angustifolia (DVA) on the virulence properties of cariogenic Streptococcus mutans and Porphyromonas gingivalis implicated in periodontal diseases. Methods. S. mutans was cultured in tryptone broth containing a crude leaf extract of DVA for 16 hours, and the pH was measured after 10, 12, 14, and 16 h. Biofilms of S. mutans were grown on glass slides for 48 hours and exposed to plant extract for 30 minutes; the adherent cells were reincubated and the pH was measured at various time intervals. Minimum bactericidal concentration of the extracts against the four periodontal pathogens was determined. The effect of the subinhibitory concentration of plant extract on the production of proteinases by P. gingivalis was also evaluated. Results. DVA had no effect on acid production by S. mutans biofilms; however, it significantly inhibited acid production in planktonic cells. Periodontal pathogens were completely eliminated at low concentrations ranging from 0.09 to 0.02 mg/mL of crude plant extracts. At subinhibitory concentrations, DVA significantly reduced Arg-gingipain (24%) and Lys-gingipain (53%) production by P. gingivalis (P ≤ 0.01). Conclusions. These results suggest that DVA has the potential to be used to control oral infections including dental caries and periodontal diseases. PMID:24223061

  3. Anti-adipogenic effects of extracts of Ficus deltoidea var. deltoidea and var. angustifolia on 3T3-L1 adipocytes*

    PubMed Central

    Woon, Shiau Mei; Seng, Yew Wei; Ling, Anna Pick Kiong; Chye, Soi Moi; Koh, Rhun Yian

    2014-01-01

    Objective: This study examined the anti-adipogenic effects of extracts of Ficus deltoidea var. deltoidia and var. angustifolia, a natural slimming aid, on 3T3-L1 adipocytes. Methods: Methanol and water extracts of leaves of the F. deltoidea varieties were analyzed to determine their total flavonoid content (TFC) and total phenolic content (TPC), respectively. The study was initiated by determining the maximum non-toxic dose (MNTD) of the methanol and water extracts for 3T3-L1 preadipocytes. Possible anti-adipogenic effects were then examined by treating 2-d post confluent 3T3-L1 preadipocytes with either methanol extract or water extract at MNTD and half MNTD (½MNTD), after which the preadipocytces were induced to form mature adipocytes. Visualisation and quantification of lipid content in mature adipocytes were carried out through oil red O staining and measurement of optical density (OD) at 520 nm, respectively. Results: The TFCs of the methanol extracts were 1.36 and 1.97 g quercetin equivalents (QE)/100 g dry weight (DW), while the TPCs of the water extracts were 5.61 and 2.73 g gallic acid equivalents (GAE)/100 g DW for var. deltoidea and var. angustilofia, respectively. The MNTDs determined for methanol and water extracts were (300.0±28.3) and (225.0±21.2) μg/ml, respectively, for var. deltoidea, while much lower MNTDs [(60.0±2.0) μg/ml for methanol extracts and (8.0±1.0) μg/ml for water extracts] were recorded for var. angustifolia. Studies revealed that the methanol extracts of both varieties and the water extracts of var. angustifolia at either MNTD or ½MNTD significantly inhibited the maturation of preadipocytes. Conclusions: The inhibition of the formation of mature adipocytes indicated that leaf extracts of F. deltoidea could have potential anti-obesity effects. PMID:24599694

  4. Anti-inflammatory effect of 3-O-[(6'-O-palmitoyl)-β-D-glucopyranosyl sitosterol] from Agave angustifolia on ear edema in mice.

    PubMed

    Hernández-Valle, Elizabeth; Herrera-Ruiz, Maribel; Salgado, Gabriela Rosas; Zamilpa, Alejandro; Ocampo, Martha Lucia Arenas; Aparicio, Antonio Jiménez; Tortoriello, Jaime; Jiménez-Ferrer, Enrique

    2014-01-01

    In Mexico Agave angustifolia has traditionally been used to treat inflammation. The aim of this study was to measure the anti-inflammatory effect of the extract of A. angustifolia, the isolation and identification of active compounds. From the acetone extract two active fractions were obtained, (AsF13 and AaF16). For the characterization of pharmacological activity, the acute inflammatory model of mouse ear edema induced with TPA was used. The tissue exposed to TPA and treatments were subjected to two analysis, cytokine quantification (IL-1β, IL-6, IL-10 and TNF-α) and histopathological evaluation. The active fraction (AaF16) consisted principally of 3-O-[(6'-O-palmitoyl)-β-D-glucopyranpsyl] sitosterol. In AaF13 fraction was identified β-sitosteryl glucoside (2) and stigmasterol (3). The three treatments tested showed a concentration-dependent anti-inflammatory effect (AaAc Emax = 33.10%, EC50 = 0.126 mg/ear; AaF13 Emax = 54.22%, EC50 = 0.0524 mg/ear; AaF16 Emax = 61.01%, EC50 = 0.050 mg/ear). The application of TPA caused a significant increase on level of IL-1β, IL-6 and TNFα compared with basal condition, which was countered by any of the experimental treatments. Moreover, the experimental treatments induced a significant increase in the levels of IL-4 and IL-10, compared to the level observed when stimulated with TPA. Therefore, the anti-inflammatory effect of Agave angustifolia, is associated with the presence of 3-O-[(6'-O-palmitoyl)-β-D-glucopyranosyl] sitosterol. PMID:25268718

  5. A statistical model of fracture for a 2D hexagonal mesh: The Cell Network Model of Fracture for the bamboo Guadua angustifolia

    NASA Astrophysics Data System (ADS)

    Villalobos, Gabriel; Linero, Dorian L.; Muñoz, José D.

    2011-01-01

    A 2D, hexagonal in geometry, statistical model of fracture is proposed. The model is based on the drying fracture process of the bamboo Guadua angustifolia. A network of flexible cells are joined by brittle junctures of fixed Young moduli that break at a certain thresholds in tensile force. The system is solved by means of the Finite Element Method (FEM). The distribution of avalanche breakings exhibits a power law with exponent -2.93(9), in agreement with the random fuse model (Bhattacharyya and Chakrabarti, 2006) [1].

  6. Dynamic Changes in ANGUSTIFOLIA3 Complex Composition Reveal a Growth Regulatory Mechanism in the Maize Leaf[OPEN

    PubMed Central

    Nelissen, Hilde; Eeckhout, Dominique; Demuynck, Kirin; Persiau, Geert; Walton, Alan; van Bel, Michiel; Vervoort, Marieke; Candaele, Jasper; De Block, Jolien; Aesaert, Stijn; Van Lijsebettens, Mieke; Goormachtig, Sofie; Vandepoele, Klaas; Van Leene, Jelle; Muszynski, Michael; Gevaert, Kris; Inzé, Dirk; De Jaeger, Geert

    2015-01-01

    Most molecular processes during plant development occur with a particular spatio-temporal specificity. Thus far, it has remained technically challenging to capture dynamic protein-protein interactions within a growing organ, where the interplay between cell division and cell expansion is instrumental. Here, we combined high-resolution sampling of the growing maize (Zea mays) leaf with tandem affinity purification followed by mass spectrometry. Our results indicate that the growth-regulating SWI/SNF chromatin remodeling complex associated with ANGUSTIFOLIA3 (AN3) was conserved within growing organs and between dicots and monocots. Moreover, we were able to demonstrate the dynamics of the AN3-interacting proteins within the growing leaf, since copurified GROWTH-REGULATING FACTORs (GRFs) varied throughout the growing leaf. Indeed, GRF1, GRF6, GRF7, GRF12, GRF15, and GRF17 were significantly enriched in the division zone of the growing leaf, while GRF4 and GRF10 levels were comparable between division zone and expansion zone in the growing leaf. These dynamics were also reflected at the mRNA and protein levels, indicating tight developmental regulation of the AN3-associated chromatin remodeling complex. In addition, the phenotypes of maize plants overexpressing miRNA396a-resistant GRF1 support a model proposing that distinct associations of the chromatin remodeling complex with specific GRFs tightly regulate the transition between cell division and cell expansion. Together, our data demonstrate that advancing from static to dynamic protein-protein interaction analysis in a growing organ adds insights in how developmental switches are regulated. PMID:26036253

  7. Validation of a QuEChERS-based gas chromatographic method for analysis of pesticide residues in Cassia angustifolia (senna).

    PubMed

    Tripathy, Vandana; Saha, Ajoy; Patel, Dilipkumar J; Basak, B B; Shah, Paresh G; Kumar, Jitendra

    2016-08-01

    A simple multi-residue method based on modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach was established for the determination of 17 organochlorine (OC), 15 organophosphorous (OP) and 7 synthetic pyrethroid (SP) pesticides in an economically important medicinal plant of India, Senna (Cassia angustifolia), by gas chromatography coupled to electron capture and flame thermionic detectors (GC/ECD/FTD) and confirmation of residues was done on gas chromatograph coupled with mass spectrometry (GC-MS). The developed method was validated by testing the following parameters: linearity, limit of detection (LOD), limit of quantification (LOQ), matrix effect, accuracy-precision and measurement uncertainty; the validation study clearly demonstrated the suitability of the method for its intended application. All pesticides showed good linearity in the range 0.01-1.0 μg mL(-1) for OCs and OPs and 0.05-2.5 μg mL(-1) for SPs with correlation coefficients higher than 0.98. The method gave good recoveries for most of the pesticides (70-120%) with intra-day and inter-day precision < 20% in most of the cases. The limits of detection varied from 0.003 to 0.03 mg kg(-1), and the LOQs were determined as 0.01-0.049 mg kg(-1). The expanded uncertainties were <30%, which was distinctively less than a maximum default value of ±50%. The proposed method was successfully applied to determine pesticide residues in 12 commercial market samples obtained from different locations in India. PMID:27153296

  8. Materialism.

    PubMed

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. PMID:26301463

  9. Effects of Amendments on Growth and Uptake of Cd and Zn by Wetland Plants, Typha angustifolia and Colocasia esculenta from Contaminated Sediments.

    PubMed

    Chayapan, P; Kruatrachue, M; Meetam, M; Pokethitiyook, P

    2015-01-01

    A pot study was conducted to compare the effects of amendments (CaHPO4 and cow manure) on growth and uptake of Cd and Zn from contaminated sediments by two wetland plant species, Typha angustifolia and Colocasia esculenta. Contaminated sediments (Cd 33.2 mg kg(-1) and Zn 363 mg kg(-1)) were collected from Mae Tao basin, Mae Sot district, Tak province, Thailand. The experiment consisted of 4 treatments: control (uncontaminated sediment), Cd/Zn, Cd/Zn + 5% CaHPO4, and Cd/Zn + 10% cow manure. Plants were grown for 3 months in the greenhouse. The addition of CaHPO4 resulted in the highest relative growth rate (RGR) and highest Cd accumulation in both T. angustifolia and C. esculenta while the lowest RGR was found in C. esculenta grown in the cow manure treatment. Both plant species had higher concentrations of metals (Cd, Zn) in their belowground parts. None of the amendments affected Zn accumulation. C. esculenta exhibited the highest uptake of both Cd and Zn. The results clearly demonstrated the phytoremediation potential of C. esculenta and the enhancement of this potential by CaHPO4 amendment. PMID:25831275

  10. [Spatial distribution patterns of soil organic carbon under Elacagnus angustifolia--Achnatherum splendens community in an arid area of Northwest China].

    PubMed

    Chi, Ting; Xu, Chi; Liu, Mao-Song; Zhang, Ming-Juan; Yang, Xue-Jiao

    2013-10-01

    An investigation was conducted to study the relationships of soil organic carbon (SOC) content with root biomass and soil moisture content as well as the accumulation mechanisms of SOC under the Elacagnus angustifolia-Achnatherum splenden community in Ningxia Hui Autonomous Region of Northwest China. The results showed that the SOC content decreased gradually with increasing soil depth, and changed gently in both horizontal and vertical directions. The correlations of the SOC content and its affecting factors varied with soil depth. In 0-30 cm layer, the SOC content was significantly negatively correlated with soil moisture content; in 60-150 cm layer, the SOC content was significantly positively correlated with soil moisture content and root biomass. Partial regression analysis indicated that the root biomass density in 0-30 cm soil layer contributed significantly to the variance of SOC content. In 60-150 cm layer, the SOC content was mainly affected by root system and soil moisture content; in 30-60 cm layer, no significant correlations were observed between the SOC content and the root biomass and soil moisture content. There was an obvious difference in the accumulation mechanism of SOC in different soil layers and at different locations of E. angustifolia--A. splendens community. PMID:24483063

  11. Transcription coactivator Arabidopsis ANGUSTIFOLIA3 modulates anthocyanin accumulation and light-induced root elongation through transrepression of Constitutive Photomorphogenic1.

    PubMed

    Meng, Lai-Sheng

    2015-04-01

    ANGUSTIFOLIA3 (AN3), a transcription coactivator, is implicated in modulating cell proliferation. In this study, I found that AN3 is a novel regulator of anthocyanin biosynthesis and light-induced root elongation. Seedlings and seeds lacking AN3 activity presented significantly reduced anthocyanin accumulation and light-induced root elongation, whereas those of transgenic plants harbouring the 35S:AN3 construct exhibited increased anthocyanin accumulation. AN3 is required for the proper expression of other genes that affect anthocyanin accumulation and light-induced root elongation, Constitutive Photomorphogenic1 (COP1), encoding a RING motif - containing E3 ubiquitin ligase. AN3 was associated with COP1 promoter in vivo. Thus, AN3 may act with other proteins that bind to COP1 promoter to promote anthocyanin accumulation and inhibit light-induced root elongation. PMID:25256341

  12. Increased production of antigen-specific immunoglobulins G and M following in vivo treatment with the medicinal plants Echinacea angustifolia and Hydrastis canadensis.

    PubMed

    Rehman, J; Dillow, J M; Carter, S M; Chou, J; Le, B; Maisel, A S

    1999-06-01

    A number of immunomodulatory effects have been attributed to the medicinal plants Echinacea angustifolia and Goldenseal (Hydrastis canadensis); however, little is known about whether treatment with these plants can enhance antigen-specific immunity. We investigated the antigen-specific in vivo immunomodulatory potential of continuous treatment with Echinacea and Goldenseal root extract over a period of 6 weeks using rats that were injected with the novel antigen keyhole limpet hemocyanin (KLH) and re-exposed to KLH after the initial exposure. Immunoglobulin production was monitored via ELISA continuously over a period of 6 weeks. The Echinacea-treated group showed a significant augmentation of their primary and secondary IgG response to the antigen, whereas the Goldenseal-treated group showed an increase in the primary IgM response during the first 2 weeks of treatment. Our results suggest that medicinal plants like Echinacea or Goldenseal may enhance immune function by increasing antigen-specific immunoglobulin production. PMID:10424448

  13. Materials

    NASA Technical Reports Server (NTRS)

    Glaessgen, Edward H.; Schoeppner, Gregory A.

    2006-01-01

    NASA Langley Research Center has successfully developed an electron beam freeform fabrication (EBF3) process, a rapid metal deposition process that works efficiently with a variety of weldable alloys. The EBF3 process can be used to build a complex, unitized part in a layer-additive fashion, although the more immediate payoff is for use as a manufacturing process for adding details to components fabricated from simplified castings and forgings or plate products. The EBF3 process produces structural metallic parts with strengths comparable to that of wrought product forms and has been demonstrated on aluminum, titanium, and nickel-based alloys to date. The EBF3 process introduces metal wire feedstock into a molten pool that is created and sustained using a focused electron beam in a vacuum environment. Operation in a vacuum ensures a clean process environment and eliminates the need for a consumable shield gas. Advanced metal manufacturing methods such as EBF3 are being explored for fabrication and repair of aerospace structures, offering potential for improvements in cost, weight, and performance to enhance mission success for aircraft, launch vehicles, and spacecraft. Near-term applications of the EBF3 process are most likely to be implemented for cost reduction and lead time reduction through addition of details onto simplified preforms (casting or forging). This is particularly attractive for components with protruding details that would require a significantly large volume of material to be machined away from an oversized forging, offering significant reductions to the buy-to-fly ratio. Future far-term applications promise improved structural efficiency through reduced weight and improved performance by exploiting the layer-additive nature of the EBF3 process to fabricate tailored unitized structures with functionally graded microstructures and compositions.

  14. Quantification of canavanine, 2-aminoethanol, and cyanamide in Aphis craccivora and its host plants, Robinia pseudoacacia and Vicia angustifolia: effects of these compounds on larval survivorship of Harmonia axyridis.

    PubMed

    Kamo, Tsunashi; Tokuoka, Yoshinori; Miyazaki, Masahisa

    2012-12-01

    The cowpea aphid Aphis craccivora that infests the black locust Robinia pseudoacacia shows toxicity to its predator, the multicolored Asian ladybird beetle, Harmonia axyridis. In contrast, the same aphid species that infests the common vetch, Vicia angustifolia, is suitable prey for H. axyridis larvae. Previously, it was reported that the toxicity of A. craccivora infesting R. pseudoacacia was due to canavanine and 2-aminoethanol, but there was some doubt about the toxicity of these compounds and their concentrations in the aphids. In the present study, we determined the concentrations of cyanamide, canavanine, and 2-aminoethanol in A. craccivora infesting the two host plants. In the extracts of A. craccivora that infested either of the host plants, canavanine was undetectable, and 2-aminoethanol was detected at the concentration of 3.0-4.0 μg/g fresh weight. Cyanamide was detected in the extract of A. craccivora that infested R. pseudoacacia (7.7 μg/g fresh weight) but not in that infesting V. angustifolia. The toxicity of canavanine, 2-aminoethanol, and cyanamide was evaluated against H. axyridis larvae in a bioassay by using an artificial diet containing these compounds at various concentrations. Cyanamide exhibited 10-100 times stronger toxicity than canavanine and 2-aminoethanol. These results indicate that the toxicity is at least partly due to cyanamide, which is present in the toxic A. craccivora that infests R. pseudoacacia but absent from the non-toxic A. craccivora that infests V. angustifolia. PMID:23179101

  15. Isolation of Dihydroflavonol 4-Reductase cDNA Clones from Angelonia x angustifolia and Heterologous Expression as GST Fusion Protein in Escherichia coli

    PubMed Central

    Gosch, Christian; Nagesh, Karthik Mudigere; Thill, Jana; Miosic, Silvija; Plaschil, Sylvia; Milosevic, Malvina; Olbricht, Klaus; Ejaz, Shaghef; Rompel, Annette; Stich, Karl; Halbwirth, Heidi

    2014-01-01

    Blue Angelonia × angustifolia flowers can show spontaneous mutations resulting in white/blue and white flower colourations. In such a white line, a loss of dihydroflavonol 4-reductase (DFR) activity was observed whereas chalcone synthase and flavanone 3-hydroxylase activity remained unchanged. Thus, cloning and characterization of a DFR of Angelonia flowers was carried out for the first time. Two full length DFR cDNA clones, Ang.DFR1 and Ang.DFR2, were obtained from a diploid chimeral white/blue Angelonia × angustifolia which demonstrated a 99% identity in their translated amino acid sequence. In comparison to Ang.DFR2, Ang.DFR1 was shown to contain an extra proline in a proline-rich region at the N-terminus along with two exchanges at the amino acids 12 and 26 in the translated amino acid sequence. The recombinant Ang.DFR2 obtained by heterologous expression in yeast was functionally active catalyzing the NADPH dependent reduction of dihydroquercetin (DHQ) and dihydromyricetin (DHM) to leucocyanidin and leucomyricetin, respectively. Dihydrokaempferol (DHK) in contrast was not accepted as a substrate despite the presence of asparagine in a position assumed to determine DHK acceptance. We show that substrate acceptance testing of DFRs provides biased results for DHM conversion if products are extracted with ethyl acetate. Recombinant Ang.DFR1 was inactive and functional activity could only be restored via exchanges of the amino acids in position 12 and 26 as well as the deletion of the extra proline. E. coli transformation of the pGEX-6P-1 vector harbouring the Ang.DFR2 and heterologous expression in E. coli resulted in functionally active enzymes before and after GST tag removal. Both the GST fusion protein and purified DFR minus the GST tag could be stored at −80°C for several months without loss of enzyme activity and demonstrated identical substrate specificity as the recombinant enzyme obtained from heterologous expression in yeast. PMID:25238248

  16. Bud phenology and growth are subject to divergent selection across a latitudinal gradient in Populus angustifolia and impact adaptation across the distributional range and associated arthropods.

    PubMed

    Evans, Luke M; Kaluthota, Sobadini; Pearce, David W; Allan, Gerard J; Floate, Kevin; Rood, Stewart B; Whitham, Thomas G

    2016-07-01

    Temperate forest tree species that span large geographical areas and climatic gradients often have high levels of genetic variation. Such species are ideal for testing how neutral demographic factors and climate-driven selection structure genetic variation within species, and how this genetic variation can affect ecological communities. Here, we quantified genetic variation in vegetative phenology and growth traits in narrowleaf cottonwood, Populus angustifolia, using three common gardens planted with genotypes originating from source populations spanning the species' range along the Rocky Mountains of North America (ca. 1700 km). We present three main findings. First, we found strong evidence of divergent selection (Q ST > F ST) on fall phenology (bud set) with adaptive consequences for frost avoidance. We also found evidence for selection on bud flush duration, tree height, and basal diameter, resulting in population differentiation. Second, we found strong associations with climate variables that were strongly correlated with latitude of origin. More strongly differentiated traits also showed stronger climate correlations, which emphasizes the role that climate has played in divergent selection throughout the range. We found population × garden interaction effects; for some traits, this accounted for more of the variance than either factor alone. Tree height was influenced by the difference in climate of the source and garden locations and declined with increasing transfer distance. Third, growth traits were correlated with dependent arthropod community diversity metrics. Synthesis. Overall, we conclude that climate has influenced genetic variation and structure in phenology and growth traits and leads to local adaptation in P. angustifolia, which can then impact dependent arthropod species. Importantly, relocation of genotypes far northward or southward often resulted in poor growth, likely due to a phenological mismatch with photoperiod, the proximate

  17. Next Generation Sequencing and Transcriptome Analysis Predicts Biosynthetic Pathway of Sennosides from Senna (Cassia angustifolia Vahl.), a Non-Model Plant with Potent Laxative Properties

    PubMed Central

    Rama Reddy, Nagaraja Reddy; Mehta, Rucha Harishbhai; Soni, Palak Harendrabhai; Makasana, Jayanti; Gajbhiye, Narendra Athamaram; Ponnuchamy, Manivel; Kumar, Jitendra

    2015-01-01

    Senna (Cassia angustifolia Vahl.) is a world’s natural laxative medicinal plant. Laxative properties are due to sennosides (anthraquinone glycosides) natural products. However, little genetic information is available for this species, especially concerning the biosynthetic pathways of sennosides. We present here the transcriptome sequencing of young and mature leaf tissue of Cassia angustifolia using Illumina MiSeq platform that resulted in a total of 6.34 Gb of raw nucleotide sequence. The sequence assembly resulted in 42230 and 37174 transcripts with an average length of 1119 bp and 1467 bp for young and mature leaf, respectively. The transcripts were annotated using NCBI BLAST with ‘green plant database (txid 33090)’, Swiss Prot, Kyoto Encylcopedia of Genes & Genomes (KEGG), Cluster of Orthologous Gene (COG) and Gene Ontology (GO). Out of the total transcripts, 40138 (95.0%) and 36349 (97.7%) from young and mature leaf, respectively, were annotated by BLASTX against green plant database of NCBI. We used InterProscan to see protein similarity at domain level, a total of 34031 (young leaf) and 32077 (mature leaf) transcripts were annotated against the Pfam domains. All transcripts from young and mature leaf were assigned to 191 KEGG pathways. There were 166 and 159 CDS, respectively, from young and mature leaf involved in metabolism of terpenoids and polyketides. Many CDS encoding enzymes leading to biosynthesis of sennosides were identified. A total of 10,763 CDS differentially expressing in both young and mature leaf libraries of which 2,343 (21.7%) CDS were up-regulated in young compared to mature leaf. Several differentially expressed genes found functionally associated with sennoside biosynthesis. CDS encoding for many CYPs and TF families were identified having probable roles in metabolism of primary as well as secondary metabolites. We developed SSR markers for molecular breeding of senna. We have identified a set of putative genes involved in various

  18. Inhibition of Pancreatic Lipase and Triacylglycerol Intestinal Absorption by a Pinhão Coat (Araucaria angustifolia) Extract Rich in Condensed Tannin.

    PubMed

    Oliveira, Roselene Ferreira; Gonçalves, Geferson Almeida; Inácio, Fabíola Dorneles; Koehnlein, Eloá Angélica; de Souza, Cristina Giatti Marques; Bracht, Adelar; Peralta, Rosane Marina

    2015-07-01

    The purpose of the present work was to characterize the possible inhibition of pancreatic lipase by a tannin-rich extract obtained from the pinhão (Araucaria angustifolia seed) coat, based on the previous observation that this preparation inhibits α-amylases. Kinetic measurements of pancreatic lipase revealed that the pinhão coat tannin is an effective inhibitor. Inhibition was of the parabolic non-competitive type. The inhibition constants, Ki1 and Ki2, were equal to 332.7 ± 146.1 μg/mL and 321.2 ± 93.0 μg/mL, respectively, corresponding roughly to the inhibitor concentration producing 50% inhibition ([I]50). Consistently, the pinhão coat extract was also effective at diminishing the plasma triglyceride levels in mice after an olive oil load; 50% diminution of the area under the plasma concentration versus the time curve occurred at a dose of 250 mg/kg. This observation is most probably the consequence of an indirect inhibition of triglyceride absorption via inhibition of pancreatic lipase. For the pinhão coat tannin, this is the second report of a biological activity, the first one being a similar inhibition of the absorption of glucose derived from starch as a consequence of an inhibitory action on α-amylases. Taken together, these effects represent a potential anti-obesity action, as suggested for other polyphenol or tannin-rich preparations. PMID:26184295

  19. The Multiple Forms of alpha-Amylase Enzyme of the Araucaria Species of South America: A. araucana (Mol.) Koch and A. angustifolia (Bert.) O. Kutz : A Comparative Study.

    PubMed

    Salas, E; Cardemil, L

    1986-08-01

    alpha-Amylase is one of the major enzymes present in the seeds of both Araucaria species of South America and it initiates starch hydrolysis during germination and early seedling growth. The pattern of the multiple forms of alpha-amylase of the two Araucaria species was investigated by electrophoresis and isoelectrofocusing of the native enzyme in polyacrylamide gels. The enzyme forms were compared in the embryo and megagametophyte of quiescent seeds and of seeds imbibed for 18, 48, and 90 hours. Specific alpha-amylase enzyme forms appear and disappear during these imbibition periods showing both similarities and differences between tissues and species. Before imbibition, there are five alpha-amylase forms identical in both tissues, but different between species. After 18 hours of imbibition, there are two enzyme forms in both tissues of Araucaria araucana seeds, only one form in the embryo of Araucaria angustifolia but two forms in the megagametophyte of this specie. After 48 hours of seed imbibition, most of the enzyme forms present in quiescent seeds reappear. At 90 hours of imbibition different enzyme forms are detected in the embryo with respect to the gametophyte. The changes in form patterns of alpha-amylase are discussed according to a possible regulation of gene expression by endogenous gibberellins. PMID:16664944

  20. Kocuria palustris sp. nov. and Kocuria rhizophila sp. nov., isolated from the rhizoplane of the narrow-leaved cattail (Typha angustifolia).

    PubMed

    Kovács, G; Burghardt, J; Pradella, S; Schumann, P; Stackebrandt, E; Màrialigeti, K

    1999-01-01

    Two Gram-positive, aerobic spherical actinobacteria were isolated from the rhizoplane of narrow-leaved cattail (Typha angustifolia) collected from a floating mat in the Soroksár tributary of the Danube river, Hungary. Sequence comparisons of the 16S rDNA indicated these isolates to be phylogenetic neighbours of members of the genus Kocuria, family Micrococcaceae, in which they represent two novel lineages. The phylogenetic distinctness of the two organisms TA68T and TAGA27T was supported by DNA-DNA similarity values of less than 55% between each other and with the type strains of Kocuria rosea, Kocuria kristinae and Kocuria varians. Chemotaxonomic properties supported the placement of the two isolates in the genus Kocuria. The diagnostic diamino acid of the cell-wall peptidoglycan is lysine, the interpeptide bridge is composed of three alanine residues. Predominant menaquinone was MK-7(H2). The fatty acid pattern represents the straight-chain saturated iso-anteiso type. Main fatty acid was anteiso-C15:0. The phospholipids are diphosphatidylglycerol, phosphatidylglycerol and an unknown component. The DNA base composition of strains TA68T and TAGA27T is 69.4 and 69.6 mol% G+C, respectively. Genotypic, morphological and physiological characteristics are used to describe two new species of Kocuria, for which we propose the names Kocuria palustris, type strain DSM 11925T and Kocuria rhizophila, type strain DSM 11926T. PMID:10028258

  1. Comparison of shock wave therapy and nutraceutical composed of Echinacea angustifolia, alpha lipoic acid, conjugated linoleic acid and quercetin (perinerv) in patients with carpal tunnel syndrome.

    PubMed

    Notarnicola, Angela; Maccagnano, Giuseppe; Tafuri, Silvio; Fiore, Alessandra; Pesce, Vito; Moretti, Biagio

    2015-06-01

    Even though the initial treatment of carpal tunnel syndrome (CTS) is conservative, knowledge of the clinical effects of supplements and of some methods of physiotherapy is still preliminary. Many biological mechanisms can support the administration of shock wave therapy (ESWT) or of alpha lipoic acid (ALA) based nutraceutical, conjugated linoleic acid (GLA), anti-oxidants and Echinacea angustifolia for CTS. The shock waves reduce the nerve compression, produce an anti-inflammatory action, and accelerate the regeneration of neuropathy. ALA and GLA induce antioxidant protective actions, reduce inflammation, promote neuroregeneration, and decrease pain. The Echinacea modulates the endogenous cannabinoid system.The aim of study is to verify the efficiency of shock wave therapy versus nutraceutical composed of ALA, GLA, and Echinacea in CTS. Sixty patients were enrolled in this study and they were randomly assigned to one of two treatments. Both groups showed significant improvements in pain, symptoms' severity and functional scores, and electrodiagnostic results until the sixth month. We verified a trend to a better pain regression in the nutraceutical group. The presence of the medicinal Echinacea represents an added value to the antioxidant effect in ALA and GLA, which can justify this result. ESWT or the association of ALA, GLA, and Echinacea proved to be two effective treatments for controlling symptoms and improving the evolution of CTS. PMID:25953494

  2. Changes in polyamines, auxins and peroxidase activity during in vitro rooting of Fraxinus angustifolia shoots: an auxin-independent rooting model.

    PubMed

    Tonon, G; Kevers, C; Gaspar, T

    2001-07-01

    Among shoots of Fraxinus angustifolia Vahl raised in vitro, 76% rooted after culture on root induction medium for 5 days in darkness followed by culture on root expression medium for 15 days in light. The addition of 20.7 microM indole-butyric acid (IBA) to the root induction medium did not significantly increase the rooting percentage (88%). Putrescine, spermidine, cyclohexylamine (CHA) and aminoguanidine (AG) enhanced rooting up to 100% (98.66% for AG), when applied during root induction in the absence of IBA, otherwise these compounds inhibited rooting, as did spermine and difluoromethylornithine (DFMO) + difluoromethylarginine (DFMA). The root induction phase was characterized by a temporary increase in endogenous free indole-acetic acid (IAA) and putrescine concentrations during root induction, whereas the root expression phase was characterized by increased peroxidase activity and low concentrations of polyamines. These changes were specifically associated with the rooting process and did not depend on the presence of exogenous IBA, because application of exogenous IBA enhanced the amount of IAA in the cuttings but did not affect rooting or the pattern of changes in polyamines and peroxidase. The effects of CHA, AG and DFMO + DFMA on endogenous concentrations of auxins and polyamines highlight the close relationship between the effects of IAA and putrescine in root induction and suggest that polyamine catabolism has an important role in root formation and elongation. PMID:11446994

  3. Germination and establishment of the native plains cottonwood (Populus deltoides Marshall subsp. monilifera) and the exotic Russian-olive (Elaeagnus angustifolia L.)

    USGS Publications Warehouse

    Shafroth, Patrick B.; Auble, Gregor T.; Scott, Michael L.

    1995-01-01

    Russian-olive (Elaeagnus angustifolia) is a small Eurasian tree that has escaped from cultivation and become naturalized, primarily along watercourses throughout the western United States. We examined germination and establishment of Russian-olive and plains cottonwood (Populus deltoides), the principal native riparian tree of the Great Plains, under a range of experimental moisture and light conditions. The fewest seedings established under the driest conditions; seedling biomass was predictably lower in the shade; root-to-shoot ratios were higher for cottonwood, higher in the sun, and higher under drier conditions. Several interactions were also significant. The timing of germination and mortality varied between plains cottonwood and Russian-olive: cottonwood germinated in mid-June in all treatments in a single pulse with subsequent mortality; the timing and amount of Russian-olive germination differed substantially across treatments with little net mortality. Differences in life-history traits of these species, including seed size, viability, and dispersal, help explain treatment differences. Russian-olive will likely remain an important component of riparian communities along both unregulated and regulated western rivers because it succeeds under conditions optimal for cottonwood establishment and under many conditions unfavorable for cottonwood. Furthermore, many western states still encourage planting of Russian-olive, and control techniques tend to be labor-intensive and expensive.

  4. Inhibition of Pancreatic Lipase and Triacylglycerol Intestinal Absorption by a Pinhão Coat (Araucaria angustifolia) Extract Rich in Condensed Tannin

    PubMed Central

    Oliveira, Roselene Ferreira; Gonçalves, Geferson Almeida; Inácio, Fabíola Dorneles; Koehnlein, Eloá Angélica; de Souza, Cristina Giatti Marques; Bracht, Adelar; Peralta, Rosane Marina

    2015-01-01

    The purpose of the present work was to characterize the possible inhibition of pancreatic lipase by a tannin-rich extract obtained from the pinhão (Araucaria angustifolia seed) coat, based on the previous observation that this preparation inhibits α-amylases. Kinetic measurements of pancreatic lipase revealed that the pinhão coat tannin is an effective inhibitor. Inhibition was of the parabolic non-competitive type. The inhibition constants, K¯i1 and K¯i2, were equal to 332.7 ± 146.1 μg/mL and 321.2 ± 93.0 μg/mL, respectively, corresponding roughly to the inhibitor concentration producing 50% inhibition ([I]50). Consistently, the pinhão coat extract was also effective at diminishing the plasma triglyceride levels in mice after an olive oil load; 50% diminution of the area under the plasma concentration versus the time curve occurred at a dose of 250 mg/kg. This observation is most probably the consequence of an indirect inhibition of triglyceride absorption via inhibition of pancreatic lipase. For the pinhão coat tannin, this is the second report of a biological activity, the first one being a similar inhibition of the absorption of glucose derived from starch as a consequence of an inhibitory action on α-amylases. Taken together, these effects represent a potential anti-obesity action, as suggested for other polyphenol or tannin-rich preparations. PMID:26184295

  5. Saltcedar (Tamarix spp.) and Russian Olive (Elaeagnus angustifolia) in the Western United States-A Report on the State of the Science

    USGS Publications Warehouse

    Shafroth, Patrick

    2010-01-01

    The Salt Cedar and Russian Olive Control Demonstration Act of 2006 (Public Law 109-320) directs the Department of the Interior to submit a report to Congress that includes an assessment of several issues surrounding these two nonnative trees, now dominant components of the vegetation along many rivers in the Western United States. This report was published in 2010 as a U.S. Geological Survey Scientific Investigations Report (available online at http://pubs.usgs.gov/sir/2009/5247). The report was produced through a collaborative effort led by the Bureau of Reclamation and U.S. Geological Survey, with critical contributions from the U.S. Department of Agriculture and from university researchers. The document synthesizes the state of the science and key research needs on the following topics related to management of saltcedar (Tamarix spp.) and Russian olive (Elaeagnus angustifolia) in the Western United States: their distribution and abundance (extent); the potential for water savings associated with controlling these species; considerations related to wildlife use of saltcedar and Russian olive habitat and restored habitats; methods of control and removal; possible utilization of dead biomass following control and removal; and approaches and challenges associated with site revegetation or restoration. A concluding chapter discusses possible long-term management strategies, potentially useful field-demonstration projects, and a planning process for on-the-ground projects involving removal of saltcedar and Russian olive.

  6. Morphological variation of henequen (Agave fourcroydes, Agavaceae) germplasm and its wild ancestor (A. angustifolia) under uniform growth conditions: diversity and domestication.

    PubMed

    Colunga-Garciamarin, P; May-Pat, F

    1997-11-01

    Extant variants of henequen (Agave fourcroydes Lem.) and wild populations of its putative ancestor A. angustifolia Haw. were grown in the Mexican state of Yucatan for 10 yr under homogeneous conditions. A statistical and numerical analysis of their patterns of morphological variation was performed as part of broader research to provide evidence of its genetic diversity, evolutionary relationships and changes under human selection. A comparison with results of a similar analysis under natural growing conditions was also made. The study indicated the following. (1) Under natural growth conditions, the three putative wild ecotypes are morphologically distinct, but under uniform conditions only populations growing in Tropical subdeciduous forest may be distinguished from the other two, thus indicating the probable existence of only two ecotypes: one growing in Coastal dunes and Tropical subdeciduous forest, and the other growing in Tropical deciduous forest. (2) This last ecotype is the most similar to cultivated variants. Within its populations, the most similar to the cultivated is that known as Chelem White, gathered by artisans for its textile use. (3) The cordage-cultivated Sac Ki and Yaax Ki differ from wild populations in four syndromes of domestication: gigantism, greater fibrosity, less thorniness, and less reproductive capacity. The lower cv of their characteristics compared with those of wild populations suggest less genetic diversity. (4) Kitam Ki is probably a textile-cultivated variant of recent introduction and/or a variant in which the artificial selection process has had different direction and intensity. (5) Improved growth conditions in the botanic garden resulted in a decreased cv, an increase in size and fiber content, and a reduction of thorniness for both wild and cultivated variants. Given that wild populations with desirable characteristics exist and that these characteristics are highly plastic and respond positively to cultivation, then

  7. Female parthenogenetic apomixis and androsporogenetic parthenogenesis in embryonal cells of Araucaria angustifolia: interpolation of progenesis and asexual heterospory in an artificial sporangium.

    PubMed

    Durzan, Don J

    2012-09-01

    Cell fate, development timing and occurrence of reproductive versus apomictic development in gymnosperms are shown to be influenced by culture conditions in vitro. In this study, female parthenogenetic apomixis (fPA), androsporogenetic parthenogenesis (mAP) and progenesis were demonstrated using embryonal initials of Araucaria angustifolia in scaled-up cell suspensions passing through a single-cell bottleneck in darkness and in an artificial sporangium (AS). Expression was based on defined nutrition, hormones and feedforward-adaptive feedback process controls at 23-25 °C and in darkness. In fPA, the nucleus of an embryonal initial undergoes endomitosis and amitosis, forming a diploid egg-equivalent and an apoptotic ventral canal nucleus in a transdifferentiated archegonial tube. Discharge of egg-equivalent cells as parthenospores and their dispersal into the aqueous culture medium were followed by free-nuclear conifer-type proembryogenesis. This replaced the plesiomorphic and central features of proembryogenesis in Araucariaceae. Protoplasmic fusions of embryonal initials were used to reconstruct heterokaryotic expressions of fPA in multiwell plates. In mAP, restitutional meiosis (automixis) was responsible for androsporogenesis and the discharge of monads, dyads, tetrads and polyads. In a display of progenesis, reproductive development was brought to an earlier ontogenetic stage and expressed by embryonal initials. Colchicine increased polyploidy, but androspore formation became aberrant and fragmented. Aberrant automixis led to the formation of chromosomal bouquets, which contributed to genomic silencing in embryonal initials, cytomixis and the formation of pycnotic micronucleated cells. Dispersal of female and male parthenospores displayed heteromorphic asexual heterospory in an aqueous environment. PMID:22669467

  8. Agavins from Agave angustifolia and Agave potatorum affect food intake, body weight gain and satiety-related hormones (GLP-1 and ghrelin) in mice.

    PubMed

    Santiago-García, Patricia Araceli; López, Mercedes G

    2014-12-01

    Agavins act as a fermentable dietary fiber and have attracted attention due to their potential for reducing the risk of disease. Therefore, we evaluated the effect of supplementation using 10% agavins with a short-degree of polymerization (SDP) from Agave angustifolia Haw. (AASDP) or Agave potatorum Zucc. (APSDP) along with chicory fructans (RSE) as a reference for 5 weeks, on the energy intake, body weight gain, satiety-related hormones from the gut and blood (GLP-1 and ghrelin), blood glucose and lipids, and short-chain fatty acids (SCFAs) from the gut of ad libitum-fed mice. We evaluated the energy intake daily and weight gain every week. At the end of the experiment, portal vein blood samples as well as intestinal segments and the stomach were collected to measure glucagon-like peptide-1 (GLP-1) and ghrelin using RIA and ELISA kits, respectively. Colon SCFAs were measured using gas chromatography. The energy intake, body weight gain, and triglycerides were lower in the fructan-fed mice than in the STD-fed mice. The AASDP, APSDP, and RSE diets increased the serum levels of GLP-1 (40, 93, and 16%, respectively vs. STD) (P ≤ 0.05), whereas ghrelin was decreased (16, 38, and 42%, respectively) (P ≤ 0.05). Butyric acid increased significantly in the APSDP-fed mice (26.59 mmol g(-1), P ≤ 0.001) compared with that in the AASDP- and RSE-fed mice. We concluded that AASDP and APSDP are able to promote the secretion of the peptides involved in appetite regulation, which might help to control obesity and its associated metabolic disorder. PMID:25367106

  9. Randomized Controlled Trial for Salvia sclarea or Lavandula angustifolia: Differential Effects on Blood Pressure in Female Patients with Urinary Incontinence Undergoing Urodynamic Examination

    PubMed Central

    Lee, Yun Hee; Kang, Purum; You, Ji Hye; Park, Mira; Min, Sun Seek

    2013-01-01

    Abstract Objectives The aim of this study was to investigate the effect of inhalation of Salvia sclarea (clary sage; clary) or Lavandula angustifolia (lavender) essential oil vapors on autonomic nervous system activity in female patients with urinary incontinence undergoing urodynamic assessment. Study design, location, and subjects This study was a double-blind, randomized, controlled trial carried out in 34 female patients with urinary incontinence. Outcome measure The subjects were randomized to inhale lavender, clary, or almond (control) oil at concentrations of 5% (vol/vol) each. Systolic blood pressure, diastolic blood pressure, pulse rate, respiratory rate, and salivary cortisol were measured before and after inhalation of these odors for 60 minutes. Results The clary oil group experienced a significant decrease in systolic blood pressure compared with the control (p=0.048) and lavender oil (p=0.026) groups, a significant decrease in diastolic blood pressure compared with the lavender oil group (p=0.034) and a significant decrease in respiratory rate compared with the control group (p<0.001). In contrast, the lavender oil group tended to increase systolic and diastolic blood pressure compared with the control group. Compared with the control group, inhalation of lavender oil (p=0.045) and clary oil (p<0.001) resulted in statistically significant reductions in respiratory rate. Conclusions These results suggest that lavender oil inhalation may be inappropriate in lowering stress during urodynamic examinations, despite its antistress effects, while clary oil inhalation may be useful in inducing relaxation in female urinary incontinence patients undergoing urodynamic assessments. PMID:23360656

  10. Ecophysiological Competence of Populus alba L., Fraxinus angustifolia Vahl., and Crataegus monogyna Jacq. Used in Plantations for the Recovery of Riparian Vegetation

    NASA Astrophysics Data System (ADS)

    Manzanera, Jose A.; Martínez-Chacón, Maria F.

    2007-12-01

    In many semi-arid environments of Mediterranean ecosystems, white poplar ( Populus alba L.) is the dominant riparian tree and has been used to recover degraded areas, together with other native species, such as ash ( Fraxinus angustifolia Vahl.) and hawthorn ( Crataegus monogyna Jacq.). We addressed three main objectives: (1) to gain an improved understanding of some specific relationships between environmental parameters and leaf-level physiological factors in these riparian forest species, (2) to compare the leaf-level physiology of these riparian species to each other, and (3) to compare leaf-level responses within native riparian plots to adjacent restoration plots, in order to evaluate the competence of the plants used for the recovery of those degraded areas. We found significant differences in physiological performance between mature and young white poplars in the natural stand and among planted species. The net assimilation and transpiration rates, diameter, and height of white poplar plants were superior to those of ash and hawthorn. Ash and hawthorn showed higher water use efficiency than white poplar. White poplar also showed higher levels of stomatal conductance, behaving as a fast-growing, water-consuming species with a more active gas exchange and ecophysiological competence than the other species used for restoration purposes. In the restoration zones, the planted white poplars had higher rates of net assimilation and water use efficiency than the mature trees in the natural stand. We propose the use of white poplar for the rapid restoration of riparian vegetation in semi-arid Mediterranean environments. Ash and hawthorn can also play a role as accompanying species for the purpose of biodiversity.

  11. Como Lo Hago Yo: Myelomeningocele

    PubMed Central

    Lazareff, Jorge

    2014-01-01

    Fortificación con ádico fólico es efectiva, pero aún falta conciencia en los jóvenes. La legalidad del aborto aumenta la importancia de la consulta prenatal. Realizo la cirugía bajo microcoscopio por razones didácticas. Irrigación continua para reducir la temperatura del tejido. Trato a la plaqueta como tejido viable. No suturo la plaqueta. No cierro músculo. ATB por una semana después de cirugía. Hidrocefalia: Válvula en todos los casos de ventriculomegalia. Médula anclada: Desanclar una sola vez. Chiari II: Revisar la válvula. Incluir en el seguimiento rendimiento escolar, puede indicar obstrucción de la válvula o médula anclada. PMID:24791217

  12. Comparison of the Effects of Elaeagnus angustifolia Flower Capsule and Sildenafil Citrate Tablet on Anxiety Resulting From Sexual Dysfunction in Women Referring to the Selected Clinics of Shiraz University of Medical Sciences.

    PubMed

    Zeinalzadeh, Sanaz; Akbarzadeh, Marzieh; Mohagheghzadeh, Abdolali; Faridi, Pouya; Sayadi, Mehrab

    2016-07-01

    Dissatisfaction from sexual relationships can result in deprivation as well as problems, such as depression, anxiety, and destruction of family's mental health. One hundred twenty-five women (18 to 40 years) who suffered from hypoactive sexual desire disorder were divided into Elaeagnus angustifolia flower (4.5 g g daily for 35 days), sildenafil citrate tablet (50 mg for 4 weeks), and control groups. The study data were collected using the Female Sexual Function Index and Spielberger's questionnaire and measurement of thyroid-stimulating hormone and prolactin hormone. In the Elaeagnus angustifolia group, the mean score of state and trait anxiety decreased after the intervention. In the sildenafil citrate group also, the mean score of state anxiety decreased from 22.15 ± 4.98 to 20.1 ± 5.15 (P = .001) and that of trait anxiety decreased from 23.07 ± 4.44 to 21.55 ± 4.82 (P = .002) after the intervention. Consumption of sildenafil citrate tablet was effective in reduction of the mean score of anxiety resulting from sexual dysfunction. PMID:26224722

  13. Study on the stability of β-carotene microencapsulated with pinhão (Araucaria angustifolia seeds) starch.

    PubMed

    Spada, Jordana Corralo; Noreña, Caciano Pelayo Zapata; Marczak, Ligia Damasceno Ferreira; Tessaro, Isabel Cristina

    2012-08-01

    Native and hydrolyzed pinhão starches were used as coating materials for β-carotene microencapsulation by freeze-drying. The purpose of the present study was to evaluate the stability of β-carotene encapsulated under three different conditions: in the presence of ultraviolet light at 25±2 °C, in the dark at 25±2 °C and in the dark at 10.0±0.2 °C. The color of the samples was also analyzed. Microcapsules prepared with native starch showed the lowest stability during storage. In contrast, microcapsules encapsulated with 12 dextrose equivalent (DE) hydrolyzed starch exhibited the highest stability. First-order kinetic and Weibull models were applied to describe the degradation of β-carotene over time. The R(2) values of the Weibull model were greater than those of the first-order kinetic model. Moreover, multivariate analyses (principal component and cluster analyses) were also conducted. PMID:24750928

  14. Antifungal Effect of Lavender Essential Oil (Lavandula angustifolia) and Clotrimazole on Candida albicans: An In Vitro Study

    PubMed Central

    Behmanesh, Fereshteh; Pasha, Hajar; Sefidgar, Ali Asghar; Taghizadeh, Mohsen; Moghadamnia, Ali Akbar; Adib Rad, Hajar; Shirkhani, Leyla

    2015-01-01

    Background. The treatment of candidiasis infections is an important problem in the health care system. This study aimed to investigate the in vitro effect of lavender essential oil and clotrimazole on isolated C. albicans from vaginal candidiasis. Materials and Methods. In this clinical trial, C. albicans isolated from the vaginal discharge samples was obtained. Results. The pairwise comparison showed that lavender and clotrimazole had a significant difference; this difference in the lavender group was lower than clotrimazole. But, after 48 hours, there was no difference seen between groups. There was a significant difference between clotrimazole and DMSO groups. Comparing the changes between groups based on the same dilution, at 24 h and 48 h in clotrimazole group, showed a significant difference two times in the fungal cell count that its average during 48 h was less than 24 h. A significant difference was observed between the two periods in lavender group, only at the dilutions of 1/20 and 1/80. The average fungal cell count after 48 h was also lower in lavender group. Conclusions. Given that the lavender has antifungal activity, this can be used as an antifungal agent. However, more clinical studies are necessary to validate its use in candida infection. PMID:26550521

  15. Antifungal Effect of Lavender Essential Oil (Lavandula angustifolia) and Clotrimazole on Candida albicans: An In Vitro Study.

    PubMed

    Behmanesh, Fereshteh; Pasha, Hajar; Sefidgar, Ali Asghar; Taghizadeh, Mohsen; Moghadamnia, Ali Akbar; Adib Rad, Hajar; Shirkhani, Leyla

    2015-01-01

    Background. The treatment of candidiasis infections is an important problem in the health care system. This study aimed to investigate the in vitro effect of lavender essential oil and clotrimazole on isolated C. albicans from vaginal candidiasis. Materials and Methods. In this clinical trial, C. albicans isolated from the vaginal discharge samples was obtained. Results. The pairwise comparison showed that lavender and clotrimazole had a significant difference; this difference in the lavender group was lower than clotrimazole. But, after 48 hours, there was no difference seen between groups. There was a significant difference between clotrimazole and DMSO groups. Comparing the changes between groups based on the same dilution, at 24 h and 48 h in clotrimazole group, showed a significant difference two times in the fungal cell count that its average during 48 h was less than 24 h. A significant difference was observed between the two periods in lavender group, only at the dilutions of 1/20 and 1/80. The average fungal cell count after 48 h was also lower in lavender group. Conclusions. Given that the lavender has antifungal activity, this can be used as an antifungal agent. However, more clinical studies are necessary to validate its use in candida infection. PMID:26550521

  16. Como Lo Hago Yo: Mielomeningocele En Bolivia

    PubMed Central

    Dabdoub, Carlos F.; Dabdoub, Carlos B.; Villavicencio, Ramiro; Quevedo, Germán

    2014-01-01

    Introducción: Las malformaciones del tubo neural (MTN) representan la segunda causa más frecuente de anomalías congénitas, luego de las cardiopatías. En este grupo se destaca el mielomeningocele (MMC) por su mayor incidencia, y por ser la más incapacitante y la más compleja entre todas las demás malformaciones del sistema nervioso c`entral (SNC). En Bolivia, como en muchos países de Sudamérica, los bajos niveles socio-culturales y la debilidad en el sistema sanitario, hacen que su incidencia y su morbilidad, sean mayores que en las naciones más desarrolladas. Material y Métodos: Se realizó un estudio retrospectivo y descriptivo de 70 casos de MMC, atendidos por un equipo multidisciplinario en el Hospital Universitario Japonés (HUJ) de Santa Cruz de la Sierra, entre 2008-2011. De ellos, 60 fueron intervenidos quirúrgicamente. Resultados: Se realizaron controles prenatales sólo en 27 mujeres (38.6%), diagnosticándose una disrafia espinal en apenas dos casos (7.4%). La edad de ingreso del MMC en su mayoría fue después de las 24 horas (65.6%), predominando su localización en la región lumbosacra (64.3%). De ellos, 67.2% eran abiertos, presentando un 32.9% un daño neurológico motor parcial mientras que 47.1% tenían paraplejia por debajo de la lesión. De los 70 casos, tres (4.3%) no fueron intervenidos, por presentar defectos congénitos severos o estado general grave. Las principales complicaciones posoperatorias inmediatas fueron: dehiscencia de sutura y/o infección de la herida (16.6%), fístula de líquido cefalorraquídeo (LCR) (10%) e infección del SNC (11.7%). La mortalidad general y postoperatoria fue de 7.1% y 3.3%, respectivamente. Al mes de vida presentaban hidrocefalia un 80% de los pacientes operados, colocándose una derivación ventriculoperitoneal (DVP) de presión media. De 9 pacientes que tuvieron un acompanamiento de dos o más años, seis presentaron una médula anclada, que fueron intervenidas quirúrgicamente. Conclusi

  17. Proliferative activity of a blend of Echinacea angustifolia and Echinacea purpurea root extracts in human vein epithelial, HeLa, and QBC-939 cell lines, but not in Beas-2b cell lines

    PubMed Central

    Cichello, Simon Angelo; Yao, Qian; He, Xiao Qiong

    2015-01-01

    Echinacea is used for its immunostimulating properties and may have a role in modulating adverse immune effects of chemotherapy (i.e., use of 5-fluorouracil (5-FU); fluorouracil and its immunosuppressive effect). Patients may seek herbal remedies such as Echinacea (Echinacea angustifolia and Echinacea purpurea) for immune stimulation. Echinacea extracts have been prescribed to supplement cancer chemotherapy for their immune-supportive effects; however, the extracts may also influence tumourgenesis. Our study aimed to determine the proliferative effect of the ethanolic blend of E. angustifolia and E. purpurea on various cancer cervical and bile duct cell lines, including HELA and QBC-939. Various cancer cells (HeLa and QBC-939) and human vein epithelial cells (HUVEC) were treated with the Echinacea blend sample that was evaporated and reconstituted in Dimethyl sulfoxide (DMSO). As the extract concentration of Echinacea was increased from 12.5 μg/mL to 25 μg/mL, there was an increase in cell inhibition up to 100%, which then reduced to 90% over the next three concentrations, 50 μg/mL, 100 μg/mL, and 200 μg/mL, in HeLa cells; further inhibitory effects were observed in QBC-939 cells, from 9% inhibition at a concentration of 25 μg/mL up to 37.96% inhibition at 100 μg/mL concentration. Moreover, this is the first study to report the growth-promoting effects of this Echinacea blend in HUVEC, up to 800% at a dose concentration of 200 μg/mL. Previous studies have suggested that chicoric acid of Echinacea spp. is responsible for the increased cell growth. The results of this study show that the hydroethanolic extract of Echinacea herbal medicine promotes the growth of HeLa cells and QBC-939 cancer cell proliferation, and may interfere with cancer treatment (i.e., chemotherapy drugs such as 5-fluorouracil and Cisplatin (DDP)). However, the Echinacea blend shows potential in neurodegenerative diseases with growth-promoting effects in HUVEC. Further animal

  18. Proliferative activity of a blend of Echinacea angustifolia and Echinacea purpurea root extracts in human vein epithelial, HeLa, and QBC-939 cell lines, but not in Beas-2b cell lines.

    PubMed

    Cichello, Simon Angelo; Yao, Qian; He, Xiao Qiong

    2016-04-01

    Echinacea is used for its immunostimulating properties and may have a role in modulating adverse immune effects of chemotherapy (i.e., use of 5-fluorouracil (5-FU); fluorouracil and its immunosuppressive effect). Patients may seek herbal remedies such as Echinacea (Echinacea angustifolia and Echinacea purpurea) for immune stimulation. Echinacea extracts have been prescribed to supplement cancer chemotherapy for their immune-supportive effects; however, the extracts may also influence tumourgenesis. Our study aimed to determine the proliferative effect of the ethanolic blend of E. angustifolia and E. purpurea on various cancer cervical and bile duct cell lines, including HELA and QBC-939. Various cancer cells (HeLa and QBC-939) and human vein epithelial cells (HUVEC) were treated with the Echinacea blend sample that was evaporated and reconstituted in Dimethyl sulfoxide (DMSO). As the extract concentration of Echinacea was increased from 12.5 μg/mL to 25 μg/mL, there was an increase in cell inhibition up to 100%, which then reduced to 90% over the next three concentrations, 50 μg/mL, 100 μg/mL, and 200 μg/mL, in HeLa cells; further inhibitory effects were observed in QBC-939 cells, from 9% inhibition at a concentration of 25 μg/mL up to 37.96% inhibition at 100 μg/mL concentration. Moreover, this is the first study to report the growth-promoting effects of this Echinacea blend in HUVEC, up to 800% at a dose concentration of 200 μg/mL. Previous studies have suggested that chicoric acid of Echinacea spp. is responsible for the increased cell growth. The results of this study show that the hydroethanolic extract of Echinacea herbal medicine promotes the growth of HeLa cells and QBC-939 cancer cell proliferation, and may interfere with cancer treatment (i.e., chemotherapy drugs such as 5-fluorouracil and Cisplatin (DDP)). However, the Echinacea blend shows potential in neurodegenerative diseases with growth-promoting effects in HUVEC. Further animal

  19. Morphological investigation of nanostructured CoMo catalysts

    NASA Astrophysics Data System (ADS)

    Pawelec, B.; Castaño, P.; Zepeda, T. A.

    2008-04-01

    This work reports the morphological investigation of nanostructured sulfided CoMo catalysts by means of high-resolution transmission electron microscopy (HRTEM). The catalysts were supported on Ti-modified hexagonal mesoporous silica (HMS-Ti) and P-modified HMS-Ti (P/HMS-Ti) materials. The oxide precursors were characterized by specific surface area (S BET), temperature-programmed reduction (TPR), diffuse reflectance infrared Fourier transform spectroscopy in the OH region (DRIFTS-OH) and X-ray photoelectron spectroscopy (XPS) in order to elucidate the influence of the impregnation sequence (successive vs. simultaneous) and the effect of P-incorporation into HMS-Ti material on the morphology of calcined CoMo catalysts. Both TPR and XPS measurements indicate that the catalysts prepared by successive impregnation possess well-dispersed MoO 3 and CoO phases, whereas their counterparts prepared by simultaneous impregnation additionally possess the CoMoO 4 phase. For all sulfided catalysts, the presence of MoS 2 phase with particle size in the range 3.3-4.4 nm was confirmed by HRTEM. Catalytic activity was evaluated in the reaction of hydrodesulfurization (HDS) of dibenzothiophene (DBT) carried out in a flow reactor at 593 K and hydrogen pressure of 5.5 MPa. P-incorporation into the HMS-Ti material led to an overall increase in HDS activity and the hydrogenation ability of the sulfided catalysts. All catalysts proved to be stable during 10 h time-on-stream (TOS) operation. The activity of sulfide catalysts in the target reaction depends linearly on the surface exposure of Co species in the oxide precursors, as determined by XPS, and on the morphology of the sulfide form of catalysts (surface density of MoS 2 particles and their sizes) as determined by HRTEM.

  20. 15. Como gatehouse (outlet tower) and access bridge, looking west ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Como gatehouse (outlet tower) and access bridge, looking west from dam crest (Trash rack visible in reservoir pool behind and right of tower) - Bitter Root Irrigation Project, Como Dam, West of U.S. Highway 93, Darby, Ravalli County, MT

  1. Sustainable materials

    NASA Astrophysics Data System (ADS)

    Allwood, Julian M.

    2016-01-01

    Materials influence every aspect of the energy system; therefore, as well as developing new materials for energy generation, materials scientists should engage in public debate about the limitations of future innovations and the conservation of existing materials.

  2. Harold Varmus investido bajo juramento como 14.º director d

    Cancer.gov

    Ganador del Premio Nobel, doctor Harold E. Varmus, prestó juramento hoy como 14.º director del Instituto Nacional del Cáncer (NCI).  "Es muy estimulante que estés de regreso con nosotros", dijo la secretaria del Departamento de Salud y Servicios Humanos K

  3. LA BIOÉTICA COMO QUEHACER FILOSÓFICO

    PubMed Central

    Ferrer, Jorge José

    2009-01-01

    El artículo examina el estatuto epistemológico de la bioética como disciplina académica. El autor sostiene que el estatuto epistemológico de un discurso lo determina la pregunta fundamental que se plantea y la respuesta que se busca, focos integradores del discurso. En el caso de la bioética, la pregunta fundamental es de índole moral. La bioética es pues una disciplina ética que tiene su hogar epistemológico en la filosofía. El autor también defiende el concepto de “éticas aplicadas”. Sugiere finalmente que el método de la bioética, sobre todo la que se hace desde nuestras latitudes, debería adoptar el círculo hermenéutico como metodología para su filosofar. PMID:20463860

  4. Understanding Materials

    ERIC Educational Resources Information Center

    Katsioloudis, Petros J.

    2010-01-01

    Almost everything people have ever done has involved materials. Historical evidence indicates that "engineered materials" have been available and utilized for the benefit of humankind since the Neolithic period, beginning about 10,000 BC. Some of these materials have been in existence for thousands of years. At first, materials consisted of wood,…

  5. Recent DDT and PCB contamination in the sediment and biota of the Como Bay (Lake Como, Italy).

    PubMed

    Bettinetti, R; Quadroni, S; Boggio, E; Galassi, S

    2016-01-15

    Due to its peculiar geographical and morphological characteristics, Lake Como (Northern Italy) represents an interesting study-case for investigating the sub-basin scale circulation of persistent organic pollutants (POPs) that, despite being banned since the 1970s, have reached surprisingly high concentrations in some southern alpine lakes as a consequence of their release from melting glaciers in recent years. In particular, the Como Bay, which is located in the city of Como, seems noteworthy because its waters have a longer residence time than the other areas of the lake. The analyses of the historical concentration of PCBs, pp′DDT and its metabolites in a sediment core sampled from the Como Bay covering a time-period from their ban to recent times, showed that the DDTs have never experienced a significant (p < 0.05) decrease over time, with concentrations of the most abundant homologue, pp′DDE, ranging from 27 to 75 ng g(-1) d.w. Conversely PCBs significantly (p < 0.05) decreased towards recent times, reaching concentrations around 80 ng g(-1) d.w. The contribution of high altitude and local sources was recorded also in the food web: both zooplankton and the zooplanktivorous fish agone were mainly contaminated by pp′DDE (81.4 ng g(-1) w.w. and 534.6 ng g(-1) w.w. respectively) and by the PCB metabolite hexa-CB (449.7 ng g(-1) w.w. and 1672.1 ng g(-1) w.w. respectively). The DDT concentrations in the agone (sampled during the years 2006–2009) never exceeded the limits for human consumption in Italy, while concentrations of six selected PCBs exceeded human health advisory recommendations in one of the fish samples analysed, when it was approximately two times higher than the recommended value of 125 ng g(-1) w.w. PMID:26520265

  6. Hazardous materials

    MedlinePlus

    ... people how to work with hazardous materials and waste. There are many different kinds of hazardous materials, including: Chemicals, like some that are used for cleaning Drugs, like chemotherapy to treat cancer Radioactive material that is used for x-rays or ...

  7. Valorisation of Como Historical Cadastral Maps Through Modern Web Geoservices

    NASA Astrophysics Data System (ADS)

    Brovelli, M. A.; Minghini, M.; Zamboni, G.

    2012-07-01

    Cartographic cultural heritage preserved in worldwide archives is often stored in the original paper version only, thus restricting both the chances of utilization and the range of possible users. The Web C.A.R.T.E. system addressed this issue with regard to the precious cadastral maps preserved at the State Archive of Como. Aim of the project was to improve the visibility and accessibility of this heritage using the latest free and open source tools for processing, cataloguing and web publishing the maps. The resulting architecture should therefore assist the State Archive of Como in managing its cartographic contents. After a pre-processing consisting of digitization and georeferencing steps, maps were provided with metadata, compiled according to the current Italian standards and managed through an ad hoc version of the GeoNetwork Opensource geocatalog software. A dedicated MapFish-based webGIS client, with an optimized version also for mobile platforms, was built for maps publication and 2D navigation. A module for 3D visualization of cadastral maps was finally developed using the NASA World Wind Virtual Globe. Thanks to a temporal slidebar, time was also included in the system producing a 4D Graphical User Interface. The overall architecture was totally built with free and open source software and allows a direct and intuitive consultation of historical maps. Besides the notable advantage of keeping original paper maps intact, the system greatly simplifies the work of the State Archive of Como common users and together widens the same range of users thanks to the modernization of map consultation tools.

  8. 78 FR 36163 - Bitterroot National Forest, Darby Ranger District, Como Forest Health Project

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-17

    ... FHP covers approximately 5,640 acres of national forest land between Lake Como and Lost Horse Roads... project area lies between Lake Como Road and Lost Horse Road, about three miles northwest of...

  9. Scintillator material

    DOEpatents

    Anderson, David F.; Kross, Brian J.

    1994-01-01

    An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography.

  10. Scintillator material

    DOEpatents

    Anderson, D.F.; Kross, B.J.

    1992-07-28

    An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography. 4 figs.

  11. Scintillator material

    DOEpatents

    Anderson, D.F.; Kross, B.J.

    1994-06-07

    An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography. 4 figs.

  12. Scintillator material

    DOEpatents

    Anderson, David F.; Kross, Brian J.

    1992-01-01

    An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography.

  13. Raw materials.

    PubMed

    Peters, Dietmar

    2007-01-01

    Industrial fermentations need raw materials that fulfill the requirements of the organism (suitable carbon and nitrogen source, minerals and specific nutrients) and that are available in a high quantity and quality. This contribution gives a comprehensive overview, including the new trends and progress of recent years. The use of feedstock based on several raw materials such as sugar, starch, inulin and lignocellulose is discussed. Biomass-based raw materials are by far the most applied feedstocks for fermentation. However, there are also raw materials for fermentations derived from the petrochemical industry. These substrates are especially hydrocarbons, alcohols and carboxylic acids. Some applications are given in this chapter. PMID:17408080

  14. Materials Repurposed

    ERIC Educational Resources Information Center

    White, Orvil L.; Townsend, J. Scott

    2008-01-01

    Few teachers find themselves with the support to purchase all of the materials they ideally need to supply their classrooms. Buying one or two simple, ready-made items can put a serious strain on anyone's budget. However, materials for science in the classroom need not be prefabricated or expensive. By looking at the function and purpose of any…

  15. Energy Materials.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Public Instruction, Des Moines.

    These resource materials, developed for use by teachers in the elementary and secondary schools, are designed to provide the teacher with a bibliography, questions and answeres, and suggested classroom activities all relating to the energy problem. The materials are designed to develop a conservation ethic and greater understanding of our energy…

  16. Packaging Materials

    NASA Astrophysics Data System (ADS)

    Frear, Darrel

    This chapter is a high-level overview of the materials used in an electronic package including: metals used as conductors in the package, ceramics and glasses used as dielectrics or insulators and polymers used as insulators and, in a composite form, as conductors. There is a need for new materials to meet the ever-changing requirements for high-speed digital and radio-frequency (RF) applications. There are different requirements for digital and RF packages that translate into the need for unique materials for each application. The interconnect and dielectric (insulating) requirements are presented for each application and the relevant materials properties and characteristics are discussed. The fundamental materials characteristics are: dielectric constant, dielectric loss, thermal and electric conductivity, resistivity, moisture absorption, glass-transition temperature, strength, time-dependent deformation (creep), and fracture toughness. The materials characteristics and properties are dependant on how they are processed to form the electronic package so the fundamentals of electronic packaging processes are discussed including wirebonding, solder interconnects, flip-chip interconnects, underfill for flip chip and overmolding. The relevant materials properties are given along with requirements (including environmentally friendly Pb-free packages) that require new materials to be developed to meet future electronics needs for both digital and RF applications.

  17. Cermet materials

    DOEpatents

    Kong, Peter C.

    2008-12-23

    A self-cleaning porous cermet material, filter and system utilizing the same may be used in filtering particulate and gaseous pollutants from internal combustion engines having intermetallic and ceramic phases. The porous cermet filter may be made from a transition metal aluminide phase and an alumina phase. Filler materials may be added to increase the porosity or tailor the catalytic properties of the cermet material. Additionally, the cermet material may be reinforced with fibers or screens. The porous filter may also be electrically conductive so that a current may be passed therethrough to heat the filter during use. Further, a heating element may be incorporated into the porous cermet filter during manufacture. This heating element can be coated with a ceramic material to electrically insulate the heating element. An external heating element may also be provided to heat the cermet filter during use.

  18. Composite material

    DOEpatents

    Hutchens, Stacy A.; Woodward, Jonathan; Evans, Barbara R.; O'Neill, Hugh M.

    2012-02-07

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  19. Insulation Material

    NASA Technical Reports Server (NTRS)

    1984-01-01

    Manufactured by Hitco Materials Division of Armco, Inc. a ceramic fiber insulation material known as Refrasil has been used extensively as a heat-absorbing ablative reinforcement for such space systems as rocket motor nozzles, combustion chambers, and re-entry shields. Refrasil fibers are highly porous and do not melt or vaporize until fibers exceed 3,100 degrees Fahrenheit. Due to these and other properties, Refrasil has found utility in a number of industrial high temperature applications where glass, asbestos and other materials fail. Hitco used this insulation to assist Richardson Co., Inc. in the manufacturing of hard rubber and plastic molded battery cases.

  20. Complex Materials

    ScienceCinema

    Cooper, Valentino

    2014-05-23

    Valentino Cooper uses some of the world's most powerful computing to understand how materials work at subatomic levels, studying breakthroughs such as piezoelectrics, which convert mechanical stress to electrical energy.

  1. Hazardous materials

    MedlinePlus

    ... should be in a room with good airflow Work Safely If you find a spill, treat it like ... Hazard communication; Material Safety Data Sheet; MSDS References Occupational Safety and Health Administration. Healthcare. Available at: www.osha. ...

  2. CURRICULUM MATERIALS.

    ERIC Educational Resources Information Center

    New Jersey State Dept. of Education, Trenton.

    MATERIALS ARE LISTED BY 36 TOPICS ARRANGED IN ALPHABETICAL ORDER. TOPICS INCLUDE APPRENTICE TRAINING, BAKING, DRAFTING, ENGLISH, GLASSBLOWING, HOME ECONOMICS, INDUSTRIAL CHEMISTRY, MACHINE SHOP, NEEDLE TRADES, REFRIGERATION, AND UPHOLSTERY. PRICES ARE GIVEN FOR EACH ITEM. (EL)

  3. Complex Materials

    SciTech Connect

    Cooper, Valentino

    2014-04-17

    Valentino Cooper uses some of the world's most powerful computing to understand how materials work at subatomic levels, studying breakthroughs such as piezoelectrics, which convert mechanical stress to electrical energy.

  4. Contrast Materials

    MedlinePlus

    ... or other reactions to contrast materials are rare, radiology departments are well-equipped to deal with them. ... is given. However, both the American College of Radiology (ACR) and the European Society of Urogenital Radiology ...

  5. Materials considerations

    NASA Technical Reports Server (NTRS)

    Gray, H. R.; Nelson, H. G.; Johnson, R. E.; Mcpherson, B.; Howard, F. S.; Swisher, J. H.

    1975-01-01

    Materials problems are examined that may be encountered within a hydrogen energy system. Emphasis is placed on hydrogen embrittlement, corrosion, oxidation, and erosion. Other factors discussed include: degradation of mechanical properties of structural alloys, system reliability, and maintenance costs.

  6. Propulsion materials

    SciTech Connect

    Wall, Edward J.; Sullivan, Rogelio A.; Gibbs, Jerry L.

    2008-01-01

    The Department of Energy’s (DOE’s) Office of Vehicle Technologies (OVT) is pleased to introduce the FY 2007 Annual Progress Report for the Propulsion Materials Research and Development Program. Together with DOE national laboratories and in partnership with private industry and universities across the United States, the program continues to engage in research and development (R&D) that provides enabling materials technology for fuel-efficient and environmentally friendly commercial and passenger vehicles.

  7. Determination of major phenolic compounds in Echinacea spp. raw materials and finished products by high-performance liquid chromatography with ultraviolet detection: single-laboratory validation matrix extension.

    PubMed

    Brown, Paula N; Chan, Michael; Paley, Lori; Betz, Joseph M

    2011-01-01

    A method previously validated to determine caftaric acid, chlorogenic acid, cynarin, echinacoside, and cichoric acid in echinacea raw materials has been successfully applied to dry extract and liquid tincture products in response to North American consumer needs. Single-laboratory validation was used to assess the repeatability, accuracy, selectivity, LOD, LOQ, analyte stability (ruggedness), and linearity of the method, with emphasis on finished products. Repeatability precision for each phenolic compound was between 1.04 and 5.65% RSD, with HorRat values between 0.30 and 1.39 for raw and dry extract finished products. HorRat values for tinctures were between 0.09 and 1.10. Accuracy of the method was determined through spike recovery studies. Recovery of each compound from raw material negative control (ginseng) was between 90 and 114%, while recovery from the finished product negative control (maltodextrin and magnesium stearate) was between 97 and 103%. A study was conducted to determine if cichoric acid, a major phenolic component of Echinacea purpurea (L.) Moench and E. angustifolia DC, degrades during sample preparation (extraction) and HPLC analysis. No significant degradation was observed over an extended testing period using the validated method. PMID:22165004

  8. Parachute materials

    SciTech Connect

    Peterson, C.W.; Johnson, D.W.

    1987-06-01

    The purpose of this paper is to present guidelines for the use of Kevlar and nylon materials in modern parachute systems. Nylon has been used in parachutes for many years, so this discussion will place emphasis upon Kevlar material properties and their application to parachute design and construction. Kevlar-29 is an aramid fiber manufactured by DuPont and is being used on parachute systems requiring high strength-to-weight ratios or sustained strength at high temperatures. Tests of parachutes using Kevlar webbing, braided cords, ribbons, and thread have demonstrated that these Kevlar materials can be used successfully in ribbon parachutes with no detrimental effects on performance. A few changes must be made in the design of a ribbon parachute to accommodate Kevlar's high modulus. Examples of parachutes that use Kevlar suspension lines, radials, ribbons, reefing lines, bridles, and skirt bands are presented to show that they are much lighter and more resistant to aerodynamic heating than all-nylon parachutes. Nylon continues to be an important material for high-performance parachute systems, however. New nylon weaves have resulted in lighter weight, stronger ribbon materials with excellent sewability characteristics.

  9. Materials Overview

    NASA Technical Reports Server (NTRS)

    Draper, Robert

    2001-01-01

    The Materials and Structures for High Performance project has made excellent progress in the development of advanced high-temperature materials and computational materials science tools to enable high-performance, hgh-efficiency, and environmentally compatible propulsion systems. Ceramic matrix composite (CMC) systems with 2700 O F temperature capability are initially being developed for low NO, combustor liners and turbine vanes. The feasibility of pushing CMC technologies to 3000 O F through revolutionary concepts is also being pursued. Achieving fuel savings of 8 to 15 percent requires higher turbine inlet temperatures as well as reductions in engine weight. An advanced disk alloy has been evaluated for application in future engines. Advanced thermal barrier coatings (TBC s) will enable 3200 O F turbine rotor inlet temperature capability. Advanced alloy development and the development of computational tools for the design of these future alloys will further enable attainment of these goals. Innovative lightweight materials, and structural and nozzle aerodynamic concepts are also being developed to reduce the weight of engine static structures to contribute toward overall fuel savings. Rig tests will demonstrate long-term durability of CMC linersand vanes and advanced turbine airfoil alloy systems, as well as fabricability of components with the highest payoff potential using the lightweight materials and structures concepts being developed.

  10. Hardfacing material

    DOEpatents

    Branagan, Daniel J.

    2012-01-17

    A method of producing a hard metallic material by forming a mixture containing at least 55% iron and at least one of boron, carbon, silicon and phosphorus. The mixture is formed into an alloy and cooled to form a metallic material having a hardness of greater than about 9.2 GPa. The invention includes a method of forming a wire by combining a metal strip and a powder. The metal strip and the powder are rolled to form a wire containing at least 55% iron and from two to seven additional elements including at least one of C, Si and B. The invention also includes a method of forming a hardened surface on a substrate by processing a solid mass to form a powder, applying the powder to a surface to form a layer containing metallic glass, and converting the glass to a crystalline material having a nanocrystalline grain size.

  11. Layered materials

    NASA Astrophysics Data System (ADS)

    Johnson, David; Clarke, Simon; Wiley, John; Koumoto, Kunihito

    2014-06-01

    Layered compounds, materials with a large anisotropy to their bonding, electrical and/or magnetic properties, have been important in the development of solid state chemistry, physics and engineering applications. Layered materials were the initial test bed where chemists developed intercalation chemistry that evolved into the field of topochemical reactions where researchers are able to perform sequential steps to arrive at kinetically stable products that cannot be directly prepared by other approaches. Physicists have used layered compounds to discover and understand novel phenomena made more apparent through reduced dimensionality. The discovery of charge and spin density waves and more recently the remarkable discovery in condensed matter physics of the two-dimensional topological insulating state were discovered in two-dimensional materials. The understanding developed in two-dimensional materials enabled subsequent extension of these and other phenomena into three-dimensional materials. Layered compounds have also been used in many technologies as engineers and scientists used their unique properties to solve challenging technical problems (low temperature ion conduction for batteries, easy shear planes for lubrication in vacuum, edge decorated catalyst sites for catalytic removal of sulfur from oil, etc). The articles that are published in this issue provide an excellent overview of the spectrum of activities that are being pursued, as well as an introduction to some of the most established achievements in the field. Clusters of papers discussing thermoelectric properties, electronic structure and transport properties, growth of single two-dimensional layers, intercalation and more extensive topochemical reactions and the interleaving of two structures to form new materials highlight the breadth of current research in this area. These papers will hopefully serve as a useful guideline for the interested reader to different important aspects in this field and

  12. Squishy Materials

    NASA Astrophysics Data System (ADS)

    Habdas, Piotr; Weeks, Eric R.; Lynn, David G.

    2006-05-01

    Most people do not realize that many substances they use in the kitchen and the bathroom are not simple liquids or solids. Everyone is familiar with three states of matter: solids, liquids, and gases. However, creams, shampoo, toothpaste, and ketchup all have properties of both liquids and solids. This paper describes demonstrations and laboratory exercises1 that show intriguing properties of squishy substances, defined as materials that are not unambiguously solid, liquid, or gas. Unlike some areas of physics, the concepts behind squishy materials are understandable even by beginning students. Squishy physics can be used to show physics questions arising from everyday life and to convey the excitement of current research.

  13. Classification Materials.

    ERIC Educational Resources Information Center

    Harvard Univ., Cambridge, MA. Center for Law and Education.

    This packet contains complaints, memoranda, exhibits, orders, regulations, and stipulations in court cases dealing with expulsion or suspension of students from school or assignment of students to selected tracks. The report presents material from cases in which students were excluded from school or classes based on retardation, race, "medical…

  14. Creating Materials.

    ERIC Educational Resources Information Center

    Yin, Mary

    1990-01-01

    Describes practical materials that relate to places within the English-as-a-Second-Language learner's own community, such as the supermarket, local fast food restaurants, pharmacy, and library. Each literacy booklet contains approximately 35 pages of activities that can be used as classroom handouts. (LB)

  15. BIOBASED MATERIALS

    EPA Science Inventory

    Biobased materials refer to products that mainly consist of a substance (or substances) derived from living matter (biomass) and either occur naturally or are synthesized, or it may refer to products made by processes that use biomass. Following a strict definition, many common m...

  16. Materials compatibility.

    SciTech Connect

    Somerday, Brian P.

    2010-04-01

    Objectives are to enable development and implementation of codes and standards for H{sub 2} containment components: (1) Evaluate data on mechanical properties of materials in H{sub 2} gas - Technical Reference on Hydrogen Compatibility of Materials; (2) Generate new benchmark data on high-priority materials - Pressure vessel steels, stainless steels; and (3) Establish procedures for reliable materials testing - Sustained-load cracking, fatigue crack propagation. Summary of this presentation are: (1) Completed measurement of cracking thresholds (K{sub TH}) for Ni-Cr-Mo pressure vessel steels in high-pressure H{sub 2} gas - K{sub TH} measurements required in ASME Article KD-10 (2) Crack arrest test methods appear to yield non-conservative results compared to crack initiation test methods - (a) Proposal to insert crack initiation test methods in Article KD-10 will be presented to ASME Project Team on Hydrogen Tanks, and (b) Crack initiation methods require test apparatus designed for dynamic loading of specimens in H{sub 2} gas; and (3) Demonstrated ability to measure fatigue crack growth of pressure vessel steels in high-pressure H{sub 2} gas - (a) Fatigue crack growth data in H{sub 2} required in ASME Article KD-10, and (b) Test apparatus is one of few in U.S. or abroad for measuring fatigue crack growth in >100 MPa H{sub 2} gas.

  17. Materials Science

    NASA Technical Reports Server (NTRS)

    2003-01-01

    The Materials Science Program is structured so that NASA s headquarters is responsible for the program content and selection, through the Enterprise Scientist, and MSFC provides for implementation of ground and flight programs with a Discipline Scientist and Discipline Manager. The Discipline Working Group of eminent scientists from outside of NASA acts in an advisory capacity and writes the Discipline Document from which the NRA content is derived. The program is reviewed approximately every three years by groups such as the Committee on Microgravity Research, the National Materials Advisory Board, and the OBPR Maximization and Prioritization (ReMaP) Task Force. The flight program has had as many as twenty-six principal investigators (PIs) in flight or flight definition stage, with the numbers of PIs in the future dependent on the results of the ReMaP Task Force and internal reviews. Each project has a NASA-appointed Project Scientist, considered a half-time job, who assists the PI in understanding and preparing for internal reviews such as the Science Concept Review and Requirements Definition Review. The Project Scientist also insures that the PI gets the maximum science support from MSFC, represents the PI to the MSFC community, and collaborates with the Project Manager to insure the project is well-supported and remains vital. Currently available flight equipment includes the Materials Science Research Rack (MSRR-1) and Microgravity Science Glovebox. Ground based projects fall into one or more of several categories. Intellectual Underpinning of Flight Program projects include theoretical studies backed by modeling and computer simulations; bring to maturity new research, often by young researchers, and may include preliminary short duration low gravity experiments in the KC-135 aircraft or drop tube; enable characterization of data sets from previous flights; and provide thermophysical property determinations to aid PIs. Radiation Shielding and preliminary In

  18. Prosthesis Material

    NASA Technical Reports Server (NTRS)

    1995-01-01

    In this photograph, Sandra Rossi user her NASA-developed prosthesis for the first time. Derived from foam insulation technology used to protect the Space Shuttle External Tank from excessive heat, FAB/CAD, a subsidiary of the Harshberger Prosthetic and Orthotic Center, utilized the technology to replace the heavy, fragile plaster they used to produce master molds for prosthetics. The new material was lighter, cheaper and easier to manufacture than plaster, resulting in lower costs to the customer.

  19. Prosthesis Material

    NASA Technical Reports Server (NTRS)

    1995-01-01

    In this photograph, James Carden uses a NASA-developed prosthesis to moved planks around his home. Derived from foam insulation technology used to protect the Space Shuttle External Tank from excessive heat, FAB/CAD, a subsidiary of the Harshberger Prosthetic and Orthotic Center, utilized the technology to replace the heavy, fragile plaster they used to produce master molds for prosthetics. The new material was lighter, cheaper and easier to manufacture than plaster, resulting in lower costs to the customer.

  20. Prosthesis Material

    NASA Technical Reports Server (NTRS)

    2004-01-01

    In this photograph, Amputee Amie Bradly uses a NASA-developed prosthesis to paint her fingernails. Derived from foam insulation technology used to protect the Space Shuttle External Tank from excessive heat, FAB/CAD, a subsidiary of the Harshberger Prosthetic and Orthotic Center, utilized the technology to replace the heavy, fragile plaster they used to produce master molds for prosthetics. The new material was lighter, cheaper and easier to manufacture than plaster, resulting in lower costs to the customer.

  1. Fullerene materials

    SciTech Connect

    Malhotra, R.; Ruoff, R.S.; Lorents, D.C.

    1995-04-01

    Fullerenes are all-carbon cage molecules. The most celebrated fullerene is the soccer-ball shaped C{sub 60}, which is composed of twenty hexagons and twelve pentagons. Because its structure is reminiscent of the geodesic domes of architect R. Buckminster Fuller, C{sub 60} is called buckminsterfullerene, and all the materials in the family are designated fullerenes. Huffman and Kraetschmer`s discovery unleashed activity around the world as scientists explored production methods, properties, and potential uses of fullerenes. Within a short period, methods for their production in electric arcs, plasmas, and flames were discovered, and several companies began selling fullerenes to the research market. What is remarkable is that in all these methods, carbon atoms assemble themselves into cage structures. The capability for self-assembly points to some inherent stability of these structures that allows their formation. The unusual structure naturally leads to unusual properties. Among them are ready solubility in solvents and a relatively high vapor pressure for a pure carbon material. The young fullerene field has already produced a surprising array of structures for the development of carbon-base materials having completely new and different properties from any that were previously possible.

  2. FOREWORD: Materials metrology Materials metrology

    NASA Astrophysics Data System (ADS)

    Bennett, Seton; Valdés, Joaquin

    2010-04-01

    It seems that so much of modern life is defined by the materials we use. From aircraft to architecture, from cars to communications, from microelectronics to medicine, the development of new materials and the innovative application of existing ones have underpinned the technological advances that have transformed the way we live, work and play. Recognizing the need for a sound technical basis for drafting codes of practice and specifications for advanced materials, the governments of countries of the Economic Summit (G7) and the European Commission signed a Memorandum of Understanding in 1982 to establish the Versailles Project on Advanced Materials and Standards (VAMAS). This project supports international trade by enabling scientific collaboration as a precursor to the drafting of standards. The VAMAS participants recognized the importance of agreeing a reliable, universally accepted basis for the traceability of the measurements on which standards depend for their preparation and implementation. Seeing the need to involve the wider metrology community, VAMAS approached the Comité International des Poids et Mesures (CIPM). Following discussions with NMI Directors and a workshop at the BIPM in February 2005, the CIPM decided to establish an ad hoc Working Group on the metrology applicable to the measurement of material properties. The Working Group presented its conclusions to the CIPM in October 2007 and published its final report in 2008, leading to the signature of a Memorandum of Understanding between VAMAS and the BIPM. This MoU recognizes the work that is already going on in VAMAS as well as in the Consultative Committees of the CIPM and establishes a framework for an ongoing dialogue on issues of materials metrology. The question of what is meant by traceability in the metrology of the properties of materials is particularly vexed when the measurement results depend on a specified procedure. In these cases, confidence in results requires not only traceable

  3. Casting materials

    DOEpatents

    Chaudhry, Anil R.; Dzugan, Robert; Harrington, Richard M.; Neece, Faurice D.; Singh, Nipendra P.

    2011-06-14

    A foam material comprises a liquid polymer and a liquid isocyanate which is mixed to make a solution that is poured, injected or otherwise deposited into a corresponding mold. A reaction from the mixture of the liquid polymer and liquid isocyanate inside the mold forms a thermally collapsible foam structure having a shape that corresponds to the inside surface configuration of the mold and a skin that is continuous and unbroken. Once the reaction is complete, the foam pattern is removed from the mold and may be used as a pattern in any number of conventional casting processes.

  4. Construction material

    DOEpatents

    Wagh, Arun S.; Antink, Allison L.

    2008-07-22

    A structural material of a polystyrene base and the reaction product of the polystyrene base and a solid phosphate ceramic is applied as a slurry which includes one or more of a metal oxide or a metal hydroxide with a source of phosphate to produce a phosphate ceramic and a poly (acrylic acid or acrylate) or combinations or salts thereof and polystyrene or MgO applied to the polystyrene base and allowed to cure so that the dried aqueous slurry chemically bonds to the polystyrene base. A method is also disclosed of applying the slurry to the polystyrene base.

  5. Alloy materials

    DOEpatents

    Hans Thieme, Cornelis Leo; Thompson, Elliott D.; Fritzemeier, Leslie G.; Cameron, Robert D.; Siegal, Edward J.

    2002-01-01

    An alloy that contains at least two metals and can be used as a substrate for a superconductor is disclosed. The alloy can contain an oxide former. The alloy can have a biaxial or cube texture. The substrate can be used in a multilayer superconductor, which can further include one or more buffer layers disposed between the substrate and the superconductor material. The alloys can be made a by process that involves first rolling the alloy then annealing the alloy. A relatively large volume percentage of the alloy can be formed of grains having a biaxial or cube texture.

  6. Photovoltaic Materials

    SciTech Connect

    Duty, C.; Angelini, J.; Armstrong, B.; Bennett, C.; Evans, B.; Jellison, G. E.; Joshi, P.; List, F.; Paranthaman, P.; Parish, C.; Wereszczak, A.

    2012-10-15

    The goal of the current project was to help make the US solar industry a world leader in the manufacture of thin film photovoltaics. The overall approach was to leverage ORNL’s unique characterization and processing technologies to gain a better understanding of the fundamental challenges for solar cell processing and apply that knowledge to targeted projects with industry members. ORNL has the capabilities in place and the expertise required to understand how basic material properties including defects, impurities, and grain boundaries affect the solar cell performance. ORNL also has unique processing capabilities to optimize the manufacturing process for fabrication of high efficiency and low cost solar cells. ORNL recently established the Center for Advanced Thin-film Systems (CATS), which contains a suite of optical and electrical characterization equipment specifically focused on solar cell research. Under this project, ORNL made these facilities available to industrial partners who were interested in pursuing collaborative research toward the improvement of their product or manufacturing process. Four specific projects were pursued with industrial partners: Global Solar Energy is a solar industry leader in full scale production manufacturing highly-efficient Copper Indium Gallium diSelenide (CIGS) thin film solar material, cells and products. ORNL worked with GSE to develop a scalable, non-vacuum, solution technique to deposit amorphous or nanocrystalline conducting barrier layers on untextured stainless steel substrates for fabricating high efficiency flexible CIGS PV. Ferro Corporation’s Electronic, Color and Glass Materials (“ECGM”) business unit is currently the world’s largest supplier of metallic contact materials in the crystalline solar cell marketplace. Ferro’s ECGM business unit has been the world's leading supplier of thick film metal pastes to the crystalline silicon PV industry for more than 30 years, and has had operational cells and

  7. PREFACE: Superconducting materials Superconducting materials

    NASA Astrophysics Data System (ADS)

    Charfi Kaddour, Samia; Singleton, John; Haddad, Sonia

    2011-11-01

    The discovery of superconductivity in 1911 was a great milestone in condensed matter physics. This discovery has resulted in an enormous amount of research activity. Collaboration among chemists and physicists, as well as experimentalists and theoreticians has given rise to very rich physics with significant potential applications ranging from electric power transmission to quantum information. Several superconducting materials have been synthesized. Crucial progress was made in 1987 with the discovery of high temperature superconductivity in copper-based compounds (cuprates) which have revealed new fascinating properties. Innovative theoretical tools have been developed to understand the striking features of cuprates which have remained for three decades the 'blue-eyed boy' for researchers in superconductor physics. The history of superconducting materials has been notably marked by the discovery of other compounds, particularly organic superconductors which despite their low critical temperature continue to attract great interest regarding their exotic properties. Last but not least, the recent observation of superconductivity in iron-based materials (pnictides) has renewed hope in reaching room temperature superconductivity. However, despite intense worldwide studies, several features related to this phenomenon remain unveiled. One of the fundamental key questions is the mechanism by which superconductivity takes place. Superconductors continue to hide their 'secret garden'. The new trends in the physics of superconductivity have been one of the two basic topics of the International Conference on Conducting Materials (ICoCoM2010) held in Sousse,Tunisia on 3-7 November 2010 and organized by the Tunisian Physical Society. The conference was a nice opportunity to bring together participants from multidisciplinary domains in the physics of superconductivity. This special section contains papers submitted by participants who gave an oral contribution at ICoCoM2010

  8. Superconducting materials

    SciTech Connect

    Ruvalds, J.

    1992-01-01

    Our research on high temperatures superconductors has produced novel insights for the normal state properties of copper oxides that have been discovered in the last few years. Advances in materials preparation have produced singly crystal samples, and sophisticated surface cleavage techniques have unveiled truly metallic behavior in many respects. Thus, the recent confirmation of a Fermi surface in several cuprate superconductors by photoemission spectroscopy has aroused interest in experimental features which heretofore were in apparent contrast to the expectations for a conventional Fermi Liquid. Our group has discovered that nested'' nearly parallel sections of the electron orbits yields an anomalous response which influences the electrical resistivity, optical reflectance, Raman spectrum, and neutron scattering cross section. Our analysis has provided an explanation for seemingly disparate experimental features of high temperature superconductors using consistent values for the electron-electron coupling and the plasma frequency. Our results include the following properties of high temperature superconductors: Nested Fermi Liquid Response in High Temperature Superconductors, Optical Reflectivity and Electron Energy Loss Data, Raman Spectra, Neutron Scattering Cross Section and Scaling, and Prospects for New Superconductors.

  9. 78 FR 38287 - Bitterroot National Forest, Darby Ranger District, Como Forest Health Project

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-26

    .... Correction In the Federal Register of June 17, 2013, in FR DOC 2013- 14229 on page 36163 in the second column...,640 acres of national forest between Lake Como and Lost Horse roads, about 6 miles northwest of...

  10. Digestive Diseases Materials

    MedlinePlus

    ... NIDDK Health Information NIDDK Home NIDDK Image Library Digestive Disease, Nutrition, and Weight-control Materials Healthy eating, ... Materials Statistics Tip Sheets Catalog Home | Diabetes Materials | Digestive Diseases Materials | Kidney and Urologic Diseases Materials Online ...

  11. Critical Materials Institute

    SciTech Connect

    Alex King

    2013-01-09

    Ames Laboratory Director Alex King talks about the goals of the Critical Materials Institute in diversifying the supply of critical materials, developing substitute materials, developing tools and techniques for recycling critical materials, and forecasting materials needs to avoid future shortages.

  12. Critical Materials Institute

    ScienceCinema

    Alex King

    2013-06-05

    Ames Laboratory Director Alex King talks about the goals of the Critical Materials Institute in diversifying the supply of critical materials, developing substitute materials, developing tools and techniques for recycling critical materials, and forecasting materials needs to avoid future shortages.

  13. Gas storage materials, including hydrogen storage materials

    SciTech Connect

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2014-11-25

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  14. Gas storage materials, including hydrogen storage materials

    DOEpatents

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  15. Geopolymer resin materials, geopolymer materials, and materials produced thereby

    DOEpatents

    Seo, Dong-Kyun; Medpelli, Dinesh; Ladd, Danielle; Mesgar, Milad

    2016-03-29

    A product formed from a first material including a geopolymer resin material, a geopolymer resin, or a combination thereof by contacting the first material with a fluid and removing at least some of the fluid to yield a product. The first material may be formed by heating and/or aging an initial geopolymer resin material to yield the first material before contacting the first material with the fluid. In some cases, contacting the first material with the fluid breaks up or disintegrates the first material (e.g., in response to contact with the fluid and in the absence of external mechanical stress), thereby forming particles having an external dimension in a range between 1 nm and 2 cm.

  16. Materials Project: A Materials Genome Approach

    DOE Data Explorer

    Ceder, Gerbrand [MIT; Persson, Kristin [LBNL

    Technological innovation - faster computers, more efficient solar cells, more compact energy storage - is often enabled by materials advances. Yet, it takes an average of 18 years to move new materials discoveries from lab to market. This is largely because materials designers operate with very little information and must painstakingly tweak new materials in the lab. Computational materials science is now powerful enough that it can predict many properties of materials before those materials are ever synthesized in the lab. By scaling materials computations over supercomputing clusters, this project has computed some properties of over 80,000 materials and screened 25,000 of these for Li-ion batteries. The computations predicted several new battery materials which were made and tested in the lab and are now being patented. By computing properties of all known materials, the Materials Project aims to remove guesswork from materials design in a variety of applications. Experimental research can be targeted to the most promising compounds from computational data sets. Researchers will be able to data-mine scientific trends in materials properties. By providing materials researchers with the information they need to design better, the Materials Project aims to accelerate innovation in materials research.[copied from http://materialsproject.org/about] You will be asked to register to be granted free, full access.

  17. Nuclear materials in Japan

    NASA Astrophysics Data System (ADS)

    2015-03-01

    The incident at Fukushima Daiichi brought materials in the nuclear industry into the spotlight. Nature Materials talks to Tatsuo Shikama, Director of the International Research Centre for Nuclear Materials, Institute for Materials Research, Tohoku University, about the current situation.

  18. Transportation of hazardous materials

    SciTech Connect

    Not Available

    1986-07-01

    This report discusses the following: data and information systems for hazardous-materials; containers for hazardous-materials transportation; hazardous-materials transportation regulation; and training for hazardous-materials transportation enforcement and emergency response.

  19. Composite material dosimeters

    DOEpatents

    Miller, Steven D.

    1996-01-01

    The present invention is a composite material containing a mix of dosimeter material powder and a polymer powder wherein the polymer is transparent to the photon emission of the dosimeter material powder. By mixing dosimeter material powder with polymer powder, less dosimeter material is needed compared to a monolithic dosimeter material chip. Interrogation is done with excitation by visible light.

  20. Method for forming materials

    DOEpatents

    Tolle, Charles R.; Clark, Denis E.; Smartt, Herschel B.; Miller, Karen S.

    2009-10-06

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  1. Como preparar un programa de informacion sobre la asistencia economica (Planning a Financial Aid Awareness Program).

    ERIC Educational Resources Information Center

    Department of Education, Washington, DC.

    This booklet, written in Spanish, is intended to be used with a set of slides as part of a presentation to students on "How To Apply for Federal Student Aid" ("Como Solicitar la Asistencia Economica Federal para Estudiantes"). The first part of the book is a script based on the slides. After the script is a guide to hosting a financial aid…

  2. Transporting particulate material

    DOEpatents

    Aldred, Derek Leslie; Rader, Jeffrey A.; Saunders, Timothy W.

    2011-08-30

    A material transporting system comprises a material transporting apparatus (100) including a material transporting apparatus hopper structure (200, 202), which comprises at least one rotary transporting apparatus; a stationary hub structure (900) constraining and assisting the at least one rotary transporting apparatus; an outlet duct configuration (700) configured to permit material to exit therefrom and comprising at least one diverging portion (702, 702'); an outlet abutment configuration (800) configured to direct material to the outlet duct configuration; an outlet valve assembly from the material transporting system venting the material transporting system; and a moving wall configuration in the material transporting apparatus capable of assisting the material transporting apparatus in transporting material in the material transporting system. Material can be moved from the material transporting apparatus hopper structure to the outlet duct configuration through the at least one rotary transporting apparatus, the outlet abutment configuration, and the outlet valve assembly.

  3. Nanocrystalline ceramic materials

    DOEpatents

    Siegel, Richard W.; Nieman, G. William; Weertman, Julia R.

    1994-01-01

    A method for preparing a treated nanocrystalline metallic material. The method of preparation includes providing a starting nanocrystalline metallic material with a grain size less than about 35 nm, compacting the starting nanocrystalline metallic material in an inert atmosphere and annealing the compacted metallic material at a temperature less than about one-half the melting point of the metallic material.

  4. Curriculum Materials 1973.

    ERIC Educational Resources Information Center

    Association for Supervision and Curriculum Development, Washington, DC.

    This publication catalogs the materials received by the Curriculum Materials Committee for the Association for Supervision and Curriculum Development's 1973 annual conference. The materials referenced offer a broad representation of current curriculum materials issued throughout the nation. Materials are referenced under general curriculum…

  5. Introductory Materials Laboratory.

    ERIC Educational Resources Information Center

    Ritter, John E., Jr.

    Described is an introductory materials science laboratory program which emphasizes crystal structure both on the atomistic and microscopic scale and the dependence of materials properties on structure. The content of this program is classified into four major areas: (1) materials science, (2) mechanical behavior of materials, (3) materials testing…

  6. Material efficiency: providing material services with less material production

    PubMed Central

    Allwood, Julian M.; Ashby, Michael F.; Gutowski, Timothy G.; Worrell, Ernst

    2013-01-01

    Material efficiency, as discussed in this Meeting Issue, entails the pursuit of the technical strategies, business models, consumer preferences and policy instruments that would lead to a substantial reduction in the production of high-volume energy-intensive materials required to deliver human well-being. This paper, which introduces a Discussion Meeting Issue on the topic of material efficiency, aims to give an overview of current thinking on the topic, spanning environmental, engineering, economics, sociology and policy issues. The motivations for material efficiency include reducing energy demand, reducing the emissions and other environmental impacts of industry, and increasing national resource security. There are many technical strategies that might bring it about, and these could mainly be implemented today if preferred by customers or producers. However, current economic structures favour the substitution of material for labour, and consumer preferences for material consumption appear to continue even beyond the point at which increased consumption provides any increase in well-being. Therefore, policy will be required to stimulate material efficiency. A theoretically ideal policy measure, such as a carbon price, would internalize the externality of emissions associated with material production, and thus motivate change directly. However, implementation of such a measure has proved elusive, and instead the adjustment of existing government purchasing policies or existing regulations— for instance to do with building design, planning or vehicle standards—is likely to have a more immediate effect. PMID:23359746

  7. Material efficiency: providing material services with less material production.

    PubMed

    Allwood, Julian M; Ashby, Michael F; Gutowski, Timothy G; Worrell, Ernst

    2013-03-13

    Material efficiency, as discussed in this Meeting Issue, entails the pursuit of the technical strategies, business models, consumer preferences and policy instruments that would lead to a substantial reduction in the production of high-volume energy-intensive materials required to deliver human well-being. This paper, which introduces a Discussion Meeting Issue on the topic of material efficiency, aims to give an overview of current thinking on the topic, spanning environmental, engineering, economics, sociology and policy issues. The motivations for material efficiency include reducing energy demand, reducing the emissions and other environmental impacts of industry, and increasing national resource security. There are many technical strategies that might bring it about, and these could mainly be implemented today if preferred by customers or producers. However, current economic structures favour the substitution of material for labour, and consumer preferences for material consumption appear to continue even beyond the point at which increased consumption provides any increase in well-being. Therefore, policy will be required to stimulate material efficiency. A theoretically ideal policy measure, such as a carbon price, would internalize the externality of emissions associated with material production, and thus motivate change directly. However, implementation of such a measure has proved elusive, and instead the adjustment of existing government purchasing policies or existing regulations-- for instance to do with building design, planning or vehicle standards--is likely to have a more immediate effect. PMID:23359746

  8. Structural materials and components

    NASA Technical Reports Server (NTRS)

    Gagliani, John (Inventor); Lee, Raymond (Inventor)

    1982-01-01

    High density structural (blocking) materials composed of a polyimide filled with glass microballoons and methods for making such materials. Structural components such as panels which have integral edgings and/or other parts made of the high density materials.

  9. Thermoelectric materials and devices

    NASA Technical Reports Server (NTRS)

    Park, Yeonjoon (Inventor); Choi, Sang H. (Inventor); King, Glen C. (Inventor); Elliott, James R. (Inventor); Talcott, Noel A. (Inventor)

    2011-01-01

    New thermoelectric materials comprise highly [111]-oriented twinned group IV alloys on the basal plane of trigonal substrates, which exhibit a high thermoelectric figure of merit and good material performance, and devices made with these materials.

  10. Nonmetallic materials handbook. Volume 1: Epoxy materials

    NASA Technical Reports Server (NTRS)

    Podlaseck, S. E.

    1979-01-01

    Thermochemical and other properties data is presented for the following types of epoxy materials: adhesives, coatings finishes, inks, electrical insulation, encapsulants, sealants, composite laminates, tapes, and thermal insulators.

  11. Coated ceramic breeder materials

    DOEpatents

    Tam, Shiu-Wing; Johnson, Carl E.

    1987-04-07

    A breeder material for use in a breeder blanket of a nuclear reactor is disclosed. The breeder material comprises a core material of lithium containing ceramic particles which has been coated with a neutron multiplier such as Be or BeO, which coating has a higher thermal conductivity than the core material.

  12. Biological materials by design.

    PubMed

    Qin, Zhao; Dimas, Leon; Adler, David; Bratzel, Graham; Buehler, Markus J

    2014-02-19

    In this topical review we discuss recent advances in the use of physical insight into the way biological materials function, to design novel engineered materials 'from scratch', or from the level of fundamental building blocks upwards and by using computational multiscale methods that link chemistry to material function. We present studies that connect advances in multiscale hierarchical material structuring with material synthesis and testing, review case studies of wood and other biological materials, and illustrate how engineered fiber composites and bulk materials are designed, modeled, and then synthesized and tested experimentally. The integration of experiment and simulation in multiscale design opens new avenues to explore the physics of materials from a fundamental perspective, and using complementary strengths from models and empirical techniques. Recent developments in this field illustrate a new paradigm by which complex material functionality is achieved through hierarchical structuring in spite of simple material constituents. PMID:24451343

  13. Materials Analysis and Modeling of Underfill Materials.

    SciTech Connect

    Wyatt, Nicholas B; Chambers, Robert S.

    2015-08-01

    The thermal-mechanical properties of three potential underfill candidate materials for PBGA applications are characterized and reported. Two of the materials are a formulations developed at Sandia for underfill applications while the third is a commercial product that utilizes a snap-cure chemistry to drastically reduce cure time. Viscoelastic models were calibrated and fit using the property data collected for one of the Sandia formulated materials. Along with the thermal-mechanical analyses performed, a series of simple bi-material strip tests were conducted to comparatively analyze the relative effects of cure and thermal shrinkage amongst the materials under consideration. Finally, current knowledge gaps as well as questions arising from the present study are identified and a path forward presented.

  14. Materials technology for SIRTF

    NASA Technical Reports Server (NTRS)

    Coulter, D.; Dolgin, B.; Rainen, R.; O'Donnell, T.

    1991-01-01

    A number of studies on materials technologies for the Space Infrared Telescope Facility (SIRTF) intended to enhance SIRTF mission performance are reviewed. Particular attention is given to dewar support straps, dewar structural materials, infrared black coatings, optical mirror materials, cryogenic properties data base, contamination control, and thermal control materials/coatings. It is noted that the alternative to baseline materials offer potential for substantial improvements in reliability, weight, and lifetime.

  15. Nanocrystalline ceramic materials

    DOEpatents

    Siegel, R.W.; Nieman, G.W.; Weertman, J.R.

    1994-06-14

    A method is disclosed for preparing a treated nanocrystalline metallic material. The method of preparation includes providing a starting nanocrystalline metallic material with a grain size less than about 35 nm, compacting the starting nanocrystalline metallic material in an inert atmosphere and annealing the compacted metallic material at a temperature less than about one-half the melting point of the metallic material. 19 figs.

  16. Puncture detecting barrier materials

    DOEpatents

    Hermes, Robert E.; Ramsey, David R.; Stampfer, Joseph F.; Macdonald, John M.

    1998-01-01

    A method and apparatus for continuous real-time monitoring of the integrity of protective barrier materials, particularly protective barriers against toxic, radioactive and biologically hazardous materials has been developed. Conductivity, resistivity or capacitance between conductive layers in the multilayer protective materials is measured by using leads connected to electrically conductive layers in the protective barrier material. The measured conductivity, resistivity or capacitance significantly changes upon a physical breach of the protective barrier material.

  17. Puncture detecting barrier materials

    DOEpatents

    Hermes, R.E.; Ramsey, D.R.; Stampfer, J.F.; Macdonald, J.M.

    1998-03-31

    A method and apparatus for continuous real-time monitoring of the integrity of protective barrier materials, particularly protective barriers against toxic, radioactive and biologically hazardous materials has been developed. Conductivity, resistivity or capacitance between conductive layers in the multilayer protective materials is measured by using leads connected to electrically conductive layers in the protective barrier material. The measured conductivity, resistivity or capacitance significantly changes upon a physical breach of the protective barrier material. 4 figs.

  18. Joining of dissimilar materials

    DOEpatents

    Tucker, Michael C; Lau, Grace Y; Jacobson, Craig P

    2012-10-16

    A method of joining dissimilar materials having different ductility, involves two principal steps: Decoration of the more ductile material's surface with particles of a less ductile material to produce a composite; and, sinter-bonding the composite produced to a joining member of a less ductile material. The joining method is suitable for joining dissimilar materials that are chemically inert towards each other (e.g., metal and ceramic), while resulting in a strong bond with a sharp interface between the two materials. The joining materials may differ greatly in form or particle size. The method is applicable to various types of materials including ceramic, metal, glass, glass-ceramic, polymer, cermet, semiconductor, etc., and the materials can be in various geometrical forms, such as powders, fibers, or bulk bodies (foil, wire, plate, etc.). Composites and devices with a decorated/sintered interface are also provided.

  19. Martian surface materials

    NASA Technical Reports Server (NTRS)

    Moore, H. J.

    1991-01-01

    A semiquantitative appreciation for the physical properties of the Mars surface materials and their global variations can be gained from the Viking Lander and remote sensing observations. Analyses of Lander data yields estimates of the mechanical properties of the soil-like surface materials and best guess estimates can be made for the remote sensing signatures of the soil-like materials at the landing sites. Results show that significant thickness of powderlike surface materials with physical properties similar to drift material are present on Mars and probably pervasive in the Tharsis region. It also appears likely that soil-like materials similar to crusty to cloddy material are typical for Mars, and that soil-like material similar to blocky material are common on Mars.

  20. Orbital foamed material extruder

    NASA Technical Reports Server (NTRS)

    Tucker, Dennis S. (Inventor)

    2009-01-01

    This invention is a process for producing foamed material in space comprising the steps of: rotating the material to simulate the force of gravity; heating the rotating material until it is molten; extruding the rotating, molten material; injecting gas into the extruded, rotating, molten material to produce molten foamed material; allowing the molten foamed material to cool to below melting temperature to produce the foamed material. The surface of the extruded foam may be heated to above melting temperature and allowed to cool to below melting temperature. The extruded foam may also be cut to predetermined length. The starting material may be metal or glass. Heating may be accomplished by electrical heating elements or by solar heating.

  1. Enhanced magnetocaloric effect material

    DOEpatents

    Lewis, Laura J. H.

    2006-07-18

    A magnetocaloric effect heterostructure having a core layer of a magnetostructural material with a giant magnetocaloric effect having a magnetic transition temperature equal to or greater than 150 K, and a constricting material layer coated on at least one surface of the magnetocaloric material core layer. The constricting material layer may enhance the magnetocaloric effect by restriction of volume changes of the core layer during application of a magnetic field to the heterostructure. A magnetocaloric effect heterostructure powder comprising a plurality of core particles of a magnetostructural material with a giant magnetocaloric effect having a magnetic transition temperature equal to or greater than 150 K, wherein each of the core particles is encapsulated within a coating of a constricting material is also disclosed. A method for enhancing the magnetocaloric effect within a giant magnetocaloric material including the step of coating a surface of the magnetocaloric material with a constricting material is disclosed.

  2. Materials science and engineering

    SciTech Connect

    Lesuer, D.R.

    1997-02-01

    During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material processing. These capabilities have been applied to a broad range of problems, in support of many programs at Lawrence Livermore National Laboratory. These studies are described in (1) Strength and Fracture Toughness of Material Interfaces; (2) Damage Evolution in Fiber Composite Materials; (3) Flashlamp Envelope Optical Properties and Failure Analysis; (4) Synthesis and Processing of Nanocrystalline Hydroxyapatite; and (5) Room Temperature Creep Compliance of Bulk Kel-E.

  3. [Elastomeric impression materials].

    PubMed

    Anagnostopoulos, T; Tsokas, K

    1990-01-01

    A review of the literature on elastomeric impression materials, is presented in this paper. The article mentions the composition and the most important properties of the elastomeric impression materials used in dental practice. The clinical significance of these materials, physical and mechanical properties are also emphasized. In addition some new elastomeric impression materials with improved properties and a new (experimental) light-cured impression material, are mentioned. Another part of this article is the biocompatibility of these materials. In the end the great significance of handling is outlined. PMID:2130039

  4. Materials for breeding blankets

    SciTech Connect

    Mattas, R.F.; Billone, M.C.

    1995-09-01

    There are several candidate concepts for tritium breeding blankets that make use of a number of special materials. These materials can be classified as Primary Blanket Materials, which have the greatest influence in determining the overall design and performance, and Secondary Blanket Materials, which have key functions in the operation of the blanket but are less important in establishing the overall design and performance. The issues associated with the blanket materials are specified and several examples of materials performance are given. Critical data needs are identified.

  5. Materials All Around Us

    NASA Technical Reports Server (NTRS)

    Jacobs, James A.

    1996-01-01

    The purpose of this journal exercise is to determine the properties of the materials in the environment around us, and to relate these properties to the materials systems for which they are used. Students will develop a strong rationale for gaining knowledge of engineering materials. The journal entries will serve as a starting point classroom discussion. Along with the journal, students are required to bring samples to class of 'found' materials and products composed of materials systems. Students are encouraged to be materials observers.

  6. Comprehensive Nuclear Materials

    SciTech Connect

    Konings, Dr. Rudy J. M.; Allen, Todd R.; Stoller, Roger E; Yamanaka, Prof. Shinsuke

    2012-01-01

    This book encompasses a rich seam of current information on the vast and multidisciplinary field of nuclear materials employed in fission and prototype fusion systems. Discussion includes both historical and contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds leading scientists and engineers. Synthesizes pertinent current science to support the selection, assessment, validation and engineering of materials in extreme nuclear environments. The work discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials.

  7. Materials Test Branch

    NASA Technical Reports Server (NTRS)

    Gordon, Gail

    2012-01-01

    The Materials Test Branch resides at Marshall Space Flight Center's Materials and Processing laboratory and has a long history of supporting NASA programs from Mercury to the recently retired Space Shuttle. The Materials Test Branch supports its customers by supplying materials testing expertise in a wide range of applications. The Materials Test Branch is divided into three Teams, The Chemistry Team, The Tribology Team and the Mechanical Test Team. Our mission and goal is to provide world-class engineering excellence in materials testing with a special emphasis on customer service.

  8. Insulated waterproof drainage material

    SciTech Connect

    Tarko, P.L.

    1988-03-15

    An insulative waterproof drainage material is described comprising: a sheet of rigid material having hills and valleys therein to define a core having opposed surfaces; permeable fabric material attached to one of the opposed surfaces; and a layer of thermally insulative material on the other of the opposed surfaces. The insulative material has first surface covering the hills and valleys and a second surface oppositely disposed from the first surface defining an outer surface. The outer surface is spaced a preselected distance D from the hills of the core. The pre-selected distance D define an insulative material thickness corresponding to a pre-selected thermal value.

  9. Databases for materials selection

    SciTech Connect

    1996-06-01

    The Cambridge Materials Selector (CMS2.0) materials database was developed by the Engineering Dept. at Cambridge University in the United Kingdom. This database makes it possible to select a material for a specific application from essentially all classes of materials. Genera, Predict, and Socrates software programs from CLI International, Houston, Texas, automate materials selection and corrosion problem-solving tasks. They are said to significantly reduce the time necessary to select a suitable material and/or to assess a corrosion problem and reach cost-effective solutions. This article describes both databases and tells how to use them.

  10. Nondestructive material characterization

    DOEpatents

    Deason, Vance A.; Johnson, John A.; Telschow, Kenneth L.

    1991-01-01

    A method and apparatus for nondestructive material characterization, such as identification of material flaws or defects, material thickness or uniformity and material properties such as acoustic velocity. The apparatus comprises a pulsed laser used to excite a piezoelectric (PZ) transducer, which sends acoustic waves through an acoustic coupling medium to the test material. The acoustic wave is absorbed and thereafter reflected by the test material, whereupon it impinges on the PZ transducer. The PZ transducer converts the acoustic wave to electrical impulses, which are conveyed to a monitor.

  11. Materials science and engineering

    SciTech Connect

    Lesuer, D R

    1998-01-01

    During FY-97, work within the Materials Science and Engineering thrust area was focused on material modeling. Their motivation for this work is to develop the capability to study the structural response of materials as well as materials processing. These capabilities have been applied to a broad range of problems, which support many programs at Lawrence Livermore National Laboratory. Recent examples of structural response problems studied include material fracture (such as interface failure), damage in laser optics, the response of weapons components (such as high explosives) and the failure of composite materials. For materials processing, typical problems studied include metal forming, laser processing, casting, and heat treating. To improve our ability to model material behavior, much of the work involves developing new material models and failure models, as well as applying the codes to new problems. Most investigations involve experimental studies to gather basic information on material response and to validate codes or material models. Projects are inherently multi-disciplinary, involving several investigators with expertise in materials and mechanics. The thrust area studies for FY-97 are described in the following three articles: (1) Evolution of Anisotropic Yield Behavior; (2) Modeling of She Localization in Materials; and (3) Modeling of Casting Microstructures and Defects.

  12. EC Transmission Line Materials

    SciTech Connect

    Bigelow, Tim S

    2012-05-01

    The purpose of this document is to identify materials acceptable for use in the US ITER Project Office (USIPO)-supplied components for the ITER Electron cyclotron Heating and Current Drive (ECH&CD) transmission lines (TL), PBS-52. The source of material property information for design analysis shall be either the applicable structural code or the ITER Material Properties Handbook. In the case of conflict, the ITER Material Properties Handbook shall take precedence. Materials selection, and use, shall follow the guidelines established in the Materials Assessment Report (MAR). Materials exposed to vacuum shall conform to the ITER Vacuum Handbook. [Ref. 2] Commercial materials shall conform to the applicable standard (e.g., ASTM, JIS, DIN) for the definition of their grade, physical, chemical and electrical properties and related testing. All materials for which a suitable certification from the supplier is not available shall be tested to determine the relevant properties, as part of the procurement. A complete traceability of all the materials including welding materials shall be provided. Halogenated materials (example: insulating materials) shall be forbidden in areas served by the detritiation systems. Exceptions must be approved by the Tritium System and Safety Section Responsible Officers.

  13. Prevalence of previously undiagnosed abdominal aortic aneurysms in the area of Como: the ComoCuore "looking for AAA" ultrasonography screening.

    PubMed

    Corrado, Giovanni; Durante, Alessandro; Genchi, Vincenzo; Trabattoni, Loris; Beretta, Sandro; Rovelli, Enza; Foglia-Manzillo, Giovanni; Ferrari, Giovanni

    2016-08-01

    The prognosis for abdominal aortic aneurysm (AAA) rupture is poor. Long-term follow-up of population-based randomized trials has demonstrated that ultrasound (US) screening for abdominal aortic aneurysms (AAAs) measuring 3 cm or greater decreases AAA-related mortality rates and is cost-effective. We though to prospectively perform during a 26-month period a limited US examination of the infrarenal aorta in volunteers of both gender aged 60-85 years without history of AAA living in the area of Como, Italy. From September 2010 to November 2013 ComoCuore, a no-profit nongovernmental association, enrolled 1555 people (aged 68.8 ± 6.8 years; 48.6 % males). Clinical data and a US imaging of the aorta were collected for each participant. AAA was found in 22 volunteers (1.4 %) mainly males (2.5 % in males vs. 0.4 % in females p = 0.005). Overall, the prevalence of cardiovascular risk factors was higher in patients with vs. without AAA (mean 2.9 ± 3.0 vs. 1.4 ± 1.0 respectively, p < 0.0001). Independent predictors of AAA on multivariate analysis were age (OR 1.14, 1.06-1.22; p < 0.0001), male gender (OR 8.23, 1.79-37.91; p = 0.007), and both current (OR 4.98, 1.57-15.79; p = 0.007) and previous smoking (OR 2.76, 1.12-8.94; p = 0.03). Our study confirms the feasibility of one time US screening for AAA in a large cohort of asymptomatic people. Independent predictors of AAA were male sex, older age and a history of smoking. Accordingly to recent data the prevalence of AAA seems to be declining, maybe due to a reduction of smoking in Italy. PMID:27215751

  14. Silicone azide fireproof material

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Finely powdered titanium oxide was added to silicone azide as the sintering agent to produce a nonflammable material. Mixing proportions, physical properties, and chemical composition of the fireproofing material are included.

  15. Materials processing in space

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The feasibility and possible advantages of processing materials in a nongravitational field are considered. Areas of investigation include biomedical applications, the processing of inorganic materials, and flight programs and funding.

  16. Renewable smart materials

    NASA Astrophysics Data System (ADS)

    Kim, Hyun Chan; Mun, Seongcheol; Ko, Hyun-U.; Zhai, Lindong; Kafy, Abdullahil; Kim, Jaehwan

    2016-07-01

    The use of renewable materials is essential in future technologies to harmonize with our living environment. Renewable materials can maintain our resources from the environment so as to overcome degradation of natural environmental services and diminished productivity. This paper reviews recent advancement of renewable materials for smart material applications, including wood, cellulose, chitin, lignin, and their sensors, actuators and energy storage applications. To further improve functionality of renewable materials, hybrid composites of inorganic functional materials are introduced by incorporating carbon nanotubes, titanium dioxide and tin oxide conducting polymers and ionic liquids. Since renewable materials have many advantages of biocompatible, sustainable, biodegradable, high mechanical strength and versatile modification behaviors, more research efforts need to be focused on the development of renewable smart materials.

  17. Materials modelling in London

    NASA Astrophysics Data System (ADS)

    Ciudad, David

    2016-04-01

    Angelos Michaelides, Professor in Theoretical Chemistry at University College London (UCL) and co-director of the Thomas Young Centre (TYC), explains to Nature Materials the challenges in materials modelling and the objectives of the TYC.

  18. Supplements to Textbook Materials.

    ERIC Educational Resources Information Center

    Holmes, Ken

    1994-01-01

    Describes the many kinds of materials that English teachers can draw upon to enrich and expand students' experiences with literature. Outlines ancillary materials used to supplement the study of William Shakespeare's "Julius Caesar." (HB)

  19. Cutter for Woven Materials

    NASA Technical Reports Server (NTRS)

    Hammons, J. M.; Keir, A. R.

    1983-01-01

    Simple tool makes accurate square cuts through strips of woven or felted materials, such as high temperature aramid fabric. Pressing handle on Guillotine Cutter forces razor blade through strip of material in slot, cutting strip off squarely.

  20. Impact tolerant material

    NASA Technical Reports Server (NTRS)

    Heyman, Joseph S. (Inventor)

    1990-01-01

    A material is protected from acoustic shock waves generated by impacting projectiles by means of a backing. The backing has an acoustic impedance that efficiently couples the acoustic energy out of the material.

  1. Ultrasonic material property determinations

    NASA Technical Reports Server (NTRS)

    Serabian, S.

    1986-01-01

    The use and potential offered by ultrasonic velocity and attenuation measurements to determine and/or monitor material properties is explored. The basis for such unique measurements along with examples of materials from a variety of industries are presented.

  2. Structural materials and components

    NASA Technical Reports Server (NTRS)

    Gagliani, John (Inventor); Lee, Raymond (Inventor)

    1982-01-01

    High density structural (blocking) materials composed of a polyimide filled with glass microballoons. Structural components such as panels which have integral edgings and/or other parts made of the high density materials.

  3. Improvisation: Teaching Materials.

    ERIC Educational Resources Information Center

    Kuzmich, John A., Jr.

    1980-01-01

    The past, present and future of music improvisation is discussed. Resources for piano, guitar, elementary general music materials, and electronic music materials are included, along with addresses of publishers. The emphasis is on jazz. (KC)

  4. Bibliography of AV Materials.

    ERIC Educational Resources Information Center

    Friedstein, Harriet, Ed.

    1981-01-01

    Lists commercially available audiovisual materials by subject area. Includes title, producer (addresses given), catalog number, format (film, filmstrip, cassette, slides), and prices. Subject areas include: elements; equilibrium; gases; laboratory techniques and experiments; general chemistry; introductory materials (including mathematics); and…

  5. Bridged graphite oxide materials

    NASA Technical Reports Server (NTRS)

    Herrera-Alonso, Margarita (Inventor); McAllister, Michael J. (Inventor); Aksay, Ilhan A. (Inventor); Prud'homme, Robert K. (Inventor)

    2010-01-01

    Bridged graphite oxide material comprising graphite sheets bridged by at least one diamine bridging group. The bridged graphite oxide material may be incorporated in polymer composites or used in adsorption media.

  6. Lightweight Materials & Structures

    NASA Video Gallery

    The Lightweight Materials and Structures (LMS) project will mature high-payoff structures and materials technologies that have direct application to NASA’s future space exploration needs.One of the...

  7. Structural materials and components

    NASA Technical Reports Server (NTRS)

    Gagliani, John (Inventor); Lee, Raymond (Inventor)

    1983-01-01

    High density structural (blocking) materials composed of a polyimide filled with glass microballoons. Structural components such as panels which have integral edgings and/or other parts made of the high density materials.

  8. Materials Curriculum Development.

    ERIC Educational Resources Information Center

    Petty, Evan R.

    1987-01-01

    Presents perspectives on the aims and content of materials science courses and materials engineering courses. Outlines a proposed curriculum for a four-year degree course in engineering and identifies technical and social skills necessary for engineers. (ML)

  9. Nanostructured composite reinforced material

    DOEpatents

    Seals, Roland D.; Ripley, Edward B.; Ludtka, Gerard M.

    2012-07-31

    A family of materials wherein nanostructures and/or nanotubes are incorporated into a multi-component material arrangement, such as a metallic or ceramic alloy or composite/aggregate, producing a new material or metallic/ceramic alloy. The new material has significantly increased strength, up to several thousands of times normal and perhaps substantially more, as well as significantly decreased weight. The new materials may be manufactured into a component where the nanostructure or nanostructure reinforcement is incorporated into the bulk and/or matrix material, or as a coating where the nanostructure or nanostructure reinforcement is incorporated into the coating or surface of a "normal" substrate material. The nanostructures are incorporated into the material structure either randomly or aligned, within grains, or along or across grain boundaries.

  10. Smart materials and structures

    NASA Technical Reports Server (NTRS)

    Rogowski, Robert S.; Heyman, Joseph S.

    1993-01-01

    Embedded optical fibers allow not only the cure-monitoring and in-service lifetime measurements of composite materials, but the NDE of material damage and degradation with aging. The capabilities of such damage-detection systems have been extended to allow the quantitative determination of 2D strain in materials by several different methods, including the interferometric and the numerical. It remains to be seen, what effect the embedded fibers have on the strength of the 'smart' materials created through their incorporation.

  11. Materials and structures

    NASA Technical Reports Server (NTRS)

    Venneri, Samuel L.

    1988-01-01

    Information on materials and structures for use in space is given in viewgraph form. Information is given on the Materials and Structures Division of NASA's Office of Aeronautics and Space Technology. The Division's space research and development budget is given. Further information is given on space materials and structures, space environmental effects, radiation effects, high temperature materials research, metal matrix composites, SiC fiber reinforced titanium alloys, structural dynamics, and control of flexible structures.

  12. Electronics materials research

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The electronic materials and is aimed at the establishment of quantitative relationships underlying crystal growth parameters, materials properties, electronic characteristics and device applications. The overall program evolves about the following main thrust areas: (1) crystal growth novel approaches to engineering of semiconductor materials; (2) investigation of materials properties and electronic characteristics on a macro and microscale; (3) surface properties and surface interactions with the bulk and ambients; (4) electronic properties controlling device applications and device performance.

  13. Materials Genome Initiative Element

    NASA Technical Reports Server (NTRS)

    Vickers, John

    2015-01-01

    NASA is committed to developing new materials and manufacturing methods that can enable new missions with ever increasing mission demands. Typically, the development and certification of new materials and manufacturing methods in the aerospace industry has required more than 20 years of development time with a costly testing and certification program. To reduce the cost and time to mature these emerging technologies, NASA is developing computational materials tools to improve understanding of the material and guide the certification process.

  14. Paramagnetic and Diamagnetic Materials

    ERIC Educational Resources Information Center

    Thompson, Frank

    2011-01-01

    Paramagnetic and diamagnetic materials are now generally known as the "Cinderella" materials of the magnetic world. However, susceptibility measurements made on these materials in the past have revealed many details about the molecular bonding and the atomic structure of the so-called "transition" elements. Indeed, the magnetic moment of neodymium…

  15. Curriculum Materials Examination System.

    ERIC Educational Resources Information Center

    Bond, David J.

    This document is a guideline for selection and evaluation of social studies curriculum materials developed by the Marin Social Studies Project. Questions are presented which will help in the examination of materials so that specific strengths and weaknesses in the materials can be determined. Consideration is given to the objectives and rationale…

  16. Creating Quality Media Materials.

    ERIC Educational Resources Information Center

    Hortin, John A.; Bailey, Gerald D.

    1982-01-01

    Innovation, imagination, and student creativity are key ingredients in creating quality media materials for the small school. Student-produced media materials, slides without a camera, personalized slide programs and copy work, self-made task cards, self-made overhead transparencies, graphic materials, and utilization of the mass media are some of…

  17. Nulcear materials production: Primer

    SciTech Connect

    Not Available

    1988-09-01

    The US Department of Energy's (DOE's) Office of Nuclear Materials Production (NMP) is responsible for managing the production and recovery of nuclear materials for national defense. NMP oversees the production of radioactive materials for government, commercial, industrial, and medical applications. This Primer is a general introduction to NMP's major activities.

  18. Hierarchical cellular materials

    SciTech Connect

    Gibson, L.J.

    1991-01-01

    In this paper a method for estimating the contributions of both the composite and the cellular microstructures to the overall material properties and the mechanical efficiency of natural cellular solids will be described. The method will be demonstrated by focusing on the Young's modulus; similar techniques can be used for other material properties. The results suggest efficient microstructures for engineered cellular materials.

  19. Hierarchical cellular materials

    SciTech Connect

    Gibson, L.J.

    1991-12-31

    In this paper a method for estimating the contributions of both the composite and the cellular microstructures to the overall material properties and the mechanical efficiency of natural cellular solids will be described. The method will be demonstrated by focusing on the Young`s modulus; similar techniques can be used for other material properties. The results suggest efficient microstructures for engineered cellular materials.

  20. Evaluating Multiethnic Materials.

    ERIC Educational Resources Information Center

    Garcia, Jesus

    The problem of identifying good ethnic studies materials is a result of the large amount of materials produced in the 1960s and of the currently renewed interest in ethnic studies. Four types of materials are available to elementary classroom teachers: ethnic information, single-ethnic approaches, minority or European-ethnic approaches, and…

  1. Fusion reactor materials

    SciTech Connect

    none,

    1989-01-01

    This paper discuses the following topics on fusion reactor materials: irradiation, facilities, test matrices, and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; fundamental mechanical behavior; radiation effects; development of structural alloys; solid breeding materials; and ceramics.

  2. Materials for Space Exploration

    NASA Technical Reports Server (NTRS)

    Robertson, Luke B.; Williams, Martha

    2010-01-01

    Topics include a lab overview, testing and processing equipment, hemochromic hydrogen sensors, antimicrobial materials, wire system materials, CNT ink formulations, CNT ink dust screens, CNT ink printed circuitry, cryogenic materials development, fire and polymers, the importance of lighting, electric lighting systems, LED for plant growth, and carbon nanotube fiber filaments.

  3. Advanced neutron absorber materials

    DOEpatents

    Branagan, Daniel J.; Smolik, Galen R.

    2000-01-01

    A neutron absorbing material and method utilizing rare earth elements such as gadolinium, europium and samarium to form metallic glasses and/or noble base nano/microcrystalline materials, the neutron absorbing material having a combination of superior neutron capture cross sections coupled with enhanced resistance to corrosion, oxidation and leaching.

  4. [Refugee Materials Center Bibliography].

    ERIC Educational Resources Information Center

    Department of Education, Kansas City, MO. Regional Office 7.

    The citations in this bibliography include textbooks, other instructional materials, and resource materials that can be used in teaching refugees in the United States. The title entries are grouped in series consisting of: (1) textbooks, workbooks, and other instuctional materials on teaching English to non-English speakers; (2) curricular and…

  5. Advanced Materials Technology

    NASA Technical Reports Server (NTRS)

    Blankenship, C. P. (Compiler); Teichman, L. A. (Compiler)

    1982-01-01

    Composites, polymer science, metallic materials (aluminum, titanium, and superalloys), materials processing technology, materials durability in the aerospace environment, ceramics, fatigue and fracture mechanics, tribology, and nondestructive evaluation (NDE) are discussed. Research and development activities are introduced to the nonaerospace industry. In order to provide a convenient means to help transfer aerospace technology to the commercial mainstream in a systematic manner.

  6. Energy Education Materials Bibliography.

    ERIC Educational Resources Information Center

    Minnesota State Energy Agency, St. Paul.

    This is an annotated bibliography of selected energy education materials. The materials included in this document are indexed according to grade level and according to whether they are background materials or classroom activities. Each of the 100 items listed were evaluated and included into either the "A" list or the "B" list. The "A" list…

  7. Bibliography of Citizenship Materials

    ERIC Educational Resources Information Center

    CASAS - Comprehensive Adult Student Assessment Systems (NJ1), 2008

    2008-01-01

    The 2008 CASAS "Bibliography of Citizenship Materials" lists available instructional resources for citizenship education. It focuses on materials appropriate for preparing people for the naturalization process and the standardized citizenship examination. Resources include textbooks, audio materials, software and Videos/DVDs. The bibliography also…

  8. Survival Learning Materials.

    ERIC Educational Resources Information Center

    Wilson, Robert M.; Barnes, Marcia M.

    This booklet is designed to provide some starter ideas for teachers to use in developing their own packet of learning materials. The procedures suggested and the examples included are literally starters. "Introduction to Survival Learning Materials" presents some procedures to help teachers get started in developing materials. "Following…

  9. Safer Aviation Materials Tested

    NASA Technical Reports Server (NTRS)

    Palaszewski, Bryan A.

    2001-01-01

    A series of thermally stable polymer samples were tested. These materials are called low heat release materials and are designed for aircraft interior decorative materials. The materials are designed to give off a minimum amount of noxious gases when heated, which increases the possibility that people can escape from a burning aircraft. New cabin materials have suitably low heat release so that fire does not spread, toxic chemicals are not given off, and the fire-emergency escape time for crew and passengers is lengthened. These low heat-release materials have a variety of advantages and applications: interiors for ground-based facilities, interiors of space vehicles, and many commercial fire-protection environments. A microscale combustion calorimeter at the Federal Aviation Administration's (FAA) Technical Center tested NASA Langley Research Center materials samples. The calorimeter is shown. A sharp, quantitative, and reproducible heat-release-rate peak is obtained in the microscale heat-release-rate test. The newly tested NASA materials significantly reduced the heat release capacity and total heat release. The thermal stability and flammability behavior of the samples was very good. The new materials demonstrated a factor of 4 reduction in total heat release over ULTEM (a currently used material). This information is provided in the following barchart. In other tests, the materials showed greater than a factor 9 reduction in heat-release capacity over ULTEM. The newly tested materials were developed for low dielectric constant, low color, and good solubility. A scale up of the material samples is needed to determine the repeatability of the performance in larger samples. Larger panels composed of the best candidate materials will be tested in a larger scale FAA Technical Center fire facility. The NASA Glenn Research Center, Langley (Jeff Hinkley), and the FAA Technical Center (Richard Lyon) cooperatively tested these materials for the Accident Mitigation

  10. Self-healing materials.

    PubMed

    Hager, Martin D; Greil, Peter; Leyens, Christoph; van der Zwaag, Sybrand; Schubert, Ulrich S

    2010-12-14

    Self-healing materials are able to partially or completely heal damage inflicted on them, e.g., crack formation; it is anticipated that the original functionality can be restored. This article covers the design and generic principles of self-healing materials through a wide range of different material classes including metals, ceramics, concrete, and polymers. Recent key developments and future challenges in the field of self-healing materials are summarised, and generic, fundamental material-independent principles and mechanism are discussed and evaluated. PMID:20839257

  11. Tailored Porous Materials

    SciTech Connect

    BARTON,THOMAS J.; BULL,LUCY M.; KLEMPERER,WALTER G.; LOY,DOUGLAS A.; MCENANEY,BRIAN; MISONO,MAKOTO; MONSON,PETER A.; PEZ,GUIDO; SCHERER,GEORGE W.; VARTULI,JAMES C.; YAGHI,OMAR M.

    1999-11-09

    Tailoring of porous materials involves not only chemical synthetic techniques for tailoring microscopic properties such as pore size, pore shape, pore connectivity, and pore surface reactivity, but also materials processing techniques for tailoring the meso- and the macroscopic properties of bulk materials in the form of fibers, thin films and monoliths. These issues are addressed in the context of five specific classes of porous materials: oxide molecular sieves, porous coordination solids, porous carbons, sol-gel derived oxides, and porous heteropolyanion salts. Reviews of these specific areas are preceded by a presentation of background material and review of current theoretical approaches to adsorption phenomena. A concluding section outlines current research needs and opportunities.

  12. Advances in dental materials.

    PubMed

    Vaderhobli, Ram M

    2011-07-01

    The use of materials to rehabilitate tooth structures is constantly changing. Over the past decade, newer material processing techniques and technologies have significantly improved the dependability and predictability of dental material for clinicians. The greatest obstacle, however, is in choosing the right combination for continued success. Finding predictable approaches for successful restorative procedures has been the goal of clinical and material scientists. This article provides a broad perspective on the advances made in various classes of dental restorative materials in terms of their functionality with respect to pit and fissure sealants, glass ionomers, and dental composites. PMID:21726695

  13. Thermal Protection Materials Development

    NASA Technical Reports Server (NTRS)

    Selvaduray, Guna; Cox, Michael

    1998-01-01

    The main portion of this contract year was spent on the development of materials for high temperature applications. In particular, thermal protection materials were constantly tested and evaluated for thermal shock resistance, high-temperature dimensional stability, and tolerance to hostile environmental effects. The analytical laboratory at the Thermal Protection Materials Branch (TPMB), NASA-Ames played an integral part in the process of materials development of high temperature aerospace applications. The materials development focused mainly on the determination of physical and chemical characteristics of specimens from the various research programs.

  14. Dealloying and Dealloyed Materials

    NASA Astrophysics Data System (ADS)

    McCue, Ian; Benn, Ellen; Gaskey, Bernard; Erlebacher, Jonah

    2016-07-01

    A successful working model for nanoporosity evolution during dealloying was introduced 15 years ago. Since that time, the field has rapidly expanded, with research groups from across the world studying dealloying and dealloyed materials. Dealloying has grown into a rich field, with some groups focusing on fundamentals and mechanisms of dealloying, other groups creating new porous metals and alloys, and even more groups studying their properties. Dealloying was originally considered only in the context of corrosion, but now it is considered a facile self-organization technique to fabricate high-surface-area, bicontinuous nanoporous materials. Owing to their high interfacial area and the versatility of metallic materials, nanoporous metals have found application in catalysis, sensing, actuation, electrolytic and ultracapacitor materials, high-temperature templates/scaffolds, battery anodes, and radiation damage–tolerant materials. In this review, we discuss the fundamental materials principles underlying the formation of dealloyed materials and then look at two major applications: catalysis and nanomechanics.

  15. Materials processing in space

    NASA Technical Reports Server (NTRS)

    Waldron, R. D.; Criswell, D. R.

    1982-01-01

    Processing-refining of raw materials from extraterrestrial sources is detailed for a space materials handling facility. The discussion is constrained to those steps necessary to separate desired components from raw or altered input ores, semi-purified feedstocks, or process scrap and convert the material into elements, alloys, and consumables. The materials are regarded as originating from dead satellites and boosters, lunar materials, and asteroids. Strong attention will be given to recycling reagent substances to avoid the necessity of transporting replacements. It is assumed that since no aqueous processes exist on the moon, the distribution of minerals will be homogeneous. The processing-refining scenario will include hydrochemical, pyrochemical, electrochemical, and physical techniques selected for the output mass rate/unit plant mass ratio. Flow charts of the various materials processing operations which could be performed with lunar materials are provided, noting the necessity of delivering several alloying elements from the earth due to scarcities on the moon.

  16. Femtosecond Laser Materials Processing

    SciTech Connect

    Banks, P.S.; Stuart, B.C.; Komashko, A.M.; Feit, M.D.; Rubenchik, A.M.; Perry, M.D.

    2000-03-06

    The use of femtosecond lasers allows materials processing of practically any material with extremely high precision and minimal collateral damage. Advantages over conventional laser machining (using pulses longer than a few tens of picoseconds) are realized by depositing the laser energy into the electrons of the material on a time scale short compared to the transfer time of this energy to the bulk of the material, resulting in increased ablation efficiency and negligible shock or thermal stress. The improvement in the morphology by using femtosecond pulses rather than nanosecond pulses has been studied in numerous materials from biologic materials to dielectrics to metals. During the drilling process, we have observed the onset of small channels which drill faster than the surrounding material.

  17. Engineering living functional materials.

    PubMed

    Chen, Allen Y; Zhong, Chao; Lu, Timothy K

    2015-01-16

    Natural materials, such as bone, integrate living cells composed of organic molecules together with inorganic components. This enables combinations of functionalities, such as mechanical strength and the ability to regenerate and remodel, which are not present in existing synthetic materials. Taking a cue from nature, we propose that engineered 'living functional materials' and 'living materials synthesis platforms' that incorporate both living systems and inorganic components could transform the performance and the manufacturing of materials. As a proof-of-concept, we recently demonstrated that synthetic gene circuits in Escherichia coli enabled biofilms to be both a functional material in its own right and a materials-synthesis platform. To demonstrate the former, we engineered E. coli biofilms into a chemical-inducer-responsive electrical switch. To demonstrate the latter, we engineered E. coli biofilms to dynamically organize biotic-abiotic materials across multiple length scales, template gold nanorods, gold nanowires, and metal/semiconductor heterostructures, and synthesize semiconductor nanoparticles (Chen, A. Y. et al. (2014) Synthesis and patterning of tunable multiscale materials with engineered cells. Nat. Mater. 13, 515-523.). Thus, tools from synthetic biology, such as those for artificial gene regulation, can be used to engineer the spatiotemporal characteristics of living systems and to interface living systems with inorganic materials. Such hybrids can possess novel properties enabled by living cells while retaining desirable functionalities of inorganic systems. These systems, as living functional materials and as living materials foundries, would provide a radically different paradigm of materials performance and synthesis-materials possessing multifunctional, self-healing, adaptable, and evolvable properties that are created and organized in a distributed, bottom-up, autonomously assembled, and environmentally sustainable manner. PMID:25592034

  18. The Sefwi-Comoé belt Ghana/Ivory Coast : a major crustal shear zone ?

    NASA Astrophysics Data System (ADS)

    Jessell, Mark

    2010-05-01

    The Palaeoproterozoic Sefwi-Comoé region that straddles Ghana and the Ivory Coast in West Africa has been characterised as resulting from a combination of compression and simple shear during late synkinematic leucogranite intrusion. The analysis of regional geophysical datasets allows us to better define the geometry of the major lithostratigraphic packages and their structural contacts in this region. This analysis reveals a series of well defined leucogranites intrusions enveloped by high strain zones. Recent finite element modelling of two-phase aggregates has shown that we can analyse the geometry of these systems both in terms of their finite defomation and their mechanical contrast. We interpret the geometries we see in the Sefwi-Comoé region as reflecting the activity of a major crustal deformation zone which was dominated by simple shear. The comparison with the modelling suggests a finite shear strain of approximately 5 gamma, which in turn implies a lateral displacement of 400 km across the belt. Our analysis suggests that the leucogranites were already acting as more rigid bodies during the (dextral?) shearing, suggesting that their emplacement was predominantly pre-kinematic, and which has implications for their potential subsequent remobilization by gravitational forces.

  19. Materials research for fusion

    NASA Astrophysics Data System (ADS)

    Knaster, J.; Moeslang, A.; Muroga, T.

    2016-05-01

    Fusion materials research started in the early 1970s following the observation of the degradation of irradiated materials used in the first commercial fission reactors. The technological challenges of fusion energy are intimately linked with the availability of suitable materials capable of reliably withstanding the extremely severe operational conditions of fusion reactors. Although fission and fusion materials exhibit common features, fusion materials research is broader. The harder mono-energetic spectrum associated with the deuterium-tritium fusion neutrons (14.1 MeV compared to <2 MeV on average for fission neutrons) releases significant amounts of hydrogen and helium as transmutation products that might lead to a (at present undetermined) degradation of structural materials after a few years of operation. Overcoming the historical lack of a fusion-relevant neutron source for materials testing is an essential pending step in fusion roadmaps. Structural materials development, together with research on functional materials capable of sustaining unprecedented power densities during plasma operation in a fusion reactor, have been the subject of decades of worldwide research efforts underpinning the present maturity of the fusion materials research programme.

  20. Uranium reference materials

    SciTech Connect

    Donivan, S.; Chessmore, R.

    1987-07-01

    The Technical Measurements Center has prepared uranium mill tailings reference materials for use by remedial action contractors and cognizant federal and state agencies. Four materials were prepared with varying concentrations of radionuclides, using three tailings materials and a river-bottom soil diluent. All materials were ground, dried, and blended thoroughly to ensure homogeneity. The analyses on which the recommended values for nuclides in the reference materials are based were performed, using independent methods, by the UNC Geotech (UNC) Chemistry Laboratory, Grand Junction, Colorado, and by C.W. Sill (Sill), Idaho National Engineering Laboratory, Idaho Falls, Idaho. Several statistical tests were performed on the analytical data to characterize the reference materials. Results of these tests reveal that the four reference materials are homogeneous and that no large systematic bias exists between the analytical methods used by Sill and those used by TMC. The average values for radionuclides of the two data sets, representing an unbiased estimate, were used as the recommended values for concentrations of nuclides in the reference materials. The recommended concentrations of radionuclides in the four reference materials are provided. Use of these reference materials will aid in providing uniform standardization among measurements made by remedial action contractors. 11 refs., 9 tabs.

  1. Materials and structures

    NASA Technical Reports Server (NTRS)

    Saito, Theodore T.; Langenbeck, Sharon L.; Al-Jamily, Ghanim; Arnold, Joe; Barbee, Troy; Coulter, Dan; Dolgin, Ben; Fichter, Buck; George, Patricia; Gorenstein, Paul

    1992-01-01

    Materials and structures technology covers a wide range of technical areas. Some of the most pertinent issues for the Astrotech 21 missions include dimensionally stable structural materials, advanced composites, dielectric coatings, optical metallic coatings for low scattered light applications, low scattered light surfaces, deployable and inflatable structures (including optical), support structures in 0-g and 1-g environments, cryogenic optics, optical blacks, contamination hardened surfaces, radiation hardened glasses and crystals, mono-metallic telescopes and instruments, and materials characterization. Some specific examples include low coefficients of thermal expansion (CTE) structures (0.01 ppm/K), lightweight thermally stable mirror materials, thermally stable optical assemblies, high reliability/accuracy (1 micron) deployable structures, and characterization of nanometer level behavior of materials/structures for interferometry concepts. Large filled-aperture concepts will require materials with CTE's of 10(exp 9) at 80 K, anti-contamination coatings, deployable and erectable structures, composite materials with CTE's less than 0.01 ppm/K and thermal hysteresis, 0.001 ppm/K. Gravitational detection systems such as LAGOS will require rigid/deployable structures, dimensionally stable components, lightweight materials with low conductivity, and high stability optics. The Materials and Structures panel addressed these issues and the relevance of the Astrotech 21 mission requirements by dividing materials and structures technology into five categories. These categories, the necessary development, and applicable mission/program development phasing are summarized. For each of these areas, technology assessments were made and development plans were defined.

  2. Engineering Living Functional Materials

    PubMed Central

    2016-01-01

    Natural materials, such as bone, integrate living cells composed of organic molecules together with inorganic components. This enables combinations of functionalities, such as mechanical strength and the ability to regenerate and remodel, which are not present in existing synthetic materials. Taking a cue from nature, we propose that engineered ‘living functional materials’ and ‘living materials synthesis platforms’ that incorporate both living systems and inorganic components could transform the performance and the manufacturing of materials. As a proof-of-concept, we recently demonstrated that synthetic gene circuits in Escherichia coli enabled biofilms to be both a functional material in its own right and a materials-synthesis platform. To demonstrate the former, we engineered E. coli biofilms into a chemical-inducer-responsive electrical switch. To demonstrate the latter, we engineered E. coli biofilms to dynamically organize biotic-abiotic materials across multiple length scales, template gold nanorods, gold nanowires, and metal/semiconductor heterostructures, and synthesize semiconductor nanoparticles (Chen, A. Y. et al. (2014) Synthesis and patterning of tunable multiscale materials with engineered cells. Nat. Mater.13, 515–523.). Thus, tools from synthetic biology, such as those for artificial gene regulation, can be used to engineer the spatiotemporal characteristics of living systems and to interface living systems with inorganic materials. Such hybrids can possess novel properties enabled by living cells while retaining desirable functionalities of inorganic systems. These systems, as living functional materials and as living materials foundries, would provide a radically different paradigm of materials performance and synthesis–materials possessing multifunctional, self-healing, adaptable, and evolvable properties that are created and organized in a distributed, bottom-up, autonomously assembled, and environmentally sustainable manner. PMID

  3. Ultrasonic nondestructive materials characterization

    NASA Technical Reports Server (NTRS)

    Green, R. E., Jr.

    1986-01-01

    A brief review of ultrasonic wave propagation in solid materials is presented with consideration of the altered behavior in anisotropic and nonlinear elastic materials in comparison with isotropic and linear elastic materials. Some experimental results are described in which ultrasonic velocity and attenuation measurements give insight into materials microstructure and associated mechanical properties. Recent developments with laser beam non-contact generation and detection of ultrasound are presented. The results of several years of experimental measurements using high-power ultrasound are discussed, which provide substantial evidence of the inability of presently accepted theories to fully explain the interaction of ultrasound with solid materials. Finally, a special synchrotron X-ray topographic system is described which affords the possibility of observing direct interaction of ultrasonic waves with the microstructural features of real crystalline solid materials for the first time.

  4. NUCLEAR FUEL MATERIAL

    DOEpatents

    Goeddel, W.V.

    1962-06-26

    An improved method is given for making the carbides of nuclear fuel material. The metal of the fuel material, which may be a fissile and/or fertile material, is transformed into a silicide, after which the silicide is comminuted to the desired particle size. This silicide is then carburized at an elevated temperature, either above or below the melting point of the silicide, to produce an intimate mixture of the carbide of the fuel material and the carbide of silicon. This mixture of the fuel material carbide and the silicon carbide is relatively stable in the presence of moisture and does not exhibit the highly reactive surface condition which is observed with fuel material carbides made by most other known methods. (AEC)

  5. Infrared fiber optic materials

    NASA Technical Reports Server (NTRS)

    Feigelson, Robert S.

    1987-01-01

    The development of IR fiber optics for use in astronomical and other space applications is summarized. Candidate materials were sought for use in the 1 to 200 micron and the 200 to 1000 micron wavelength range. Synthesis and optical characterization were carried out on several of these materials in bulk form. And the fabrication of a few materials in single crystal fiber optic form were studied.

  6. Research In Thermoelectric Materials

    NASA Technical Reports Server (NTRS)

    Wood, Charles

    1989-01-01

    Report reviews current research in thermoelectric materials with view towards development of materials of greater energy-conversion efficiency. Emphasis on effort to understand and manipulate microstructure to increase thermoelectric figure of merit, Z. Thermoelectric properties of three broad categories of materials discussed. First category includes alloys of group IV elements like silicon and germanium. Second category is rare-earth chalcogenides. Third category includes narrow-band semiconductors, especially boron carbides.

  7. ANS materials databook

    SciTech Connect

    Marchbanks, M.F.

    1995-08-01

    Technical development in the Advanced Neutron Source (ANS) project is dynamic, and a continuously updated information source is necessary to provide readily usable materials data to the designer, analyst, and materials engineer. The Advanced Neutron Source Materials Databook (AMBK) is being developed as a part of the Advanced Neutron Source Materials Information System (AMIS). Its purpose is to provide urgently needed data on a quick-turnaround support basis for those design applications whose schedules demand immediate estimates of material properties. In addition to the need for quick materials information, there is a need for consistent application of data throughout the ANS Program, especially where only limited data exist. The AMBK is being developed to fill this need as well. It is the forerunner to the Advanced Neutron Source Materials Handbook (AMHB). The AMHB, as reviewed and approved by the ANS review process, will serve as a common authoritative source of materials data in support of the ANS Project. It will furnish documented evidence of the materials data used in the design and construction of the ANS system and will serve as a quality record during any review process whose objective is to establish the safety level of the ANS complex. The information in the AMBK and AMHB is also provided in electronic form in a dial-up computer database known as the ANS Materials Database (AMDB). A single consensus source of materials information prepared and used by all national program participants has several advantages. Overlapping requirements and data needs of various sub-projects and subcontractors can be met by a single document which is continuously revised. Preliminary and final safety analysis reports, stress analysis reports, equipment specifications, materials service reports, and many other project-related documents can be substantially reduced in size and scope by appropriate reference to a single data source.

  8. Material for Fast Cutting

    NASA Technical Reports Server (NTRS)

    Perez, A.

    1986-01-01

    New material for cutting tools increases productivity of machining processes. Material, called Iscanite (or equivalent), based on silicon nitride contains more than 90 percent silicon. Combines impact resistance close to that of coated carbides with heat and wear resistance close to those of aluminum oxide ceramics. Material used for cutting on old or new machine tools and makes it possible to exploit fully power and speed of machine.

  9. Emerging smart materials systems

    SciTech Connect

    Strock, H.B.

    1996-04-01

    Smart materials systems are nonliving systems that integrate the functions of sensing, actuation, logic and control to respond adaptively to changes in their condition or the environment to which they are exposed, in a useful and usually repetitive manner. Smart materials possess both sensing and actuation capability. They can adaptively respond to changing stimuli, e.g., the variable darkening of photochromic glass or plastic on exposure to sunlight. Such passively smart materials behavior has relatively limited, although marketable, functionality.

  10. Multilayer Insulation Material Guidelines

    NASA Technical Reports Server (NTRS)

    Finckenor, M. M.; Dooling, D.

    1999-01-01

    Multilayer Insulation Material Guidelines provides data on multilayer insulation materials used by previous spacecraft such as Spacelab and the Long-Duration Exposure Facility and outlines other concerns. The data presented in the document are presented for information only. They can be used as guidelines for multilayer insulation design for future spacecraft provided the thermal requirements of each new design and the environmental effects on these materials are taken into account.

  11. Absolute nuclear material assay

    DOEpatents

    Prasad, Manoj K.; Snyderman, Neal J.; Rowland, Mark S.

    2012-05-15

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  12. Absolute nuclear material assay

    DOEpatents

    Prasad, Manoj K.; Snyderman, Neal J.; Rowland, Mark S.

    2010-07-13

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  13. Femtosecond laser materials processing

    SciTech Connect

    Stuart, B. C., LLNL

    1998-06-02

    Femtosecond lasers enable materials processing of most any material with extremely high precision and negligible shock or thermal loading to the surrounding area Applications ranging from drilling teeth to cutting explosives to making high-aspect ratio cuts in metals with no heat-affected zone are made possible by this technology For material removal at reasonable rates, we developed a fully computer-controlled 15-Watt average power, 100-fs laser machining system.

  14. Material for radioactive protection

    DOEpatents

    Taylor, R.S.; Boyer, N.W.

    A boron containing burn resistant, low-level radiation protection material useful, for example, as a liner for radioactive waste disposal and storage, a component for neutron absorber, and a shield for a neutron source is described. The material is basically composed of borax in the range of 25 to 50%, coal tar in the range of 25 to 37.5%, with the remainder being an epoxy resin mix. A preferred composition is 50% borax, 25% coal tar and 25% epoxy resin. The material is not susceptible to burning and is about 1/5 the cost of existing radiation protection material utilized in similar applications.

  15. Fireset materials aging study

    SciTech Connect

    Smith, H.M.; Arnold, C.; Bailey, M.E.

    1982-07-01

    A thermally-accelerated aging study of 10 selected organic materials used in a fireset has been conducted. The study included both quantitative and qualitative gas analyses as well as the measurement of physical properties before and after accelerated aging. The test plan involved single material aging, as well as pairs and larger groups to look for synergistic interactions. The material types tested were epoxies, polyurethanes, polysulfides, silicones, phenolics, polyolefins, and diallyl phthalates. Only two of the materials tested showed evidence of degradation as a result of aging.

  16. Materials Science Laboratory

    NASA Technical Reports Server (NTRS)

    Jackson, Dionne

    2005-01-01

    The NASA Materials Science Laboratory (MSL) provides science and engineering services to NASA and Contractor customers at KSC, including those working for the Space Shuttle. International Space Station. and Launch Services Programs. These services include: (1) Independent/unbiased failure analysis (2) Support to Accident/Mishap Investigation Boards (3) Materials testing and evaluation (4) Materials and Processes (M&P) engineering consultation (5) Metrology (6) Chemical analysis (including ID of unknown materials) (7) Mechanical design and fabrication We provide unique solutions to unusual and urgent problems associated with aerospace flight hardware, ground support equipment and related facilities.

  17. Functional Hybrid Materials

    NASA Astrophysics Data System (ADS)

    Gómez-Romero, Pedro; Sanchez, Clément

    2004-04-01

    Functional Hybrid Materials consist of both organic and inorganic components, assembled for the purpose of generating desirable properties and functionalities. The aim is twofold: to bring out or enhance advantageous chemical, electrochemical, magnetic or electronic characteristics and at the same time to reduce or wholly suppress undesirable properties or effects. Another target is the creation of entirely new material behavior. The vast number of hybrid material components available has opened up a wide and diversified field of fascinating research. In this book, a team of highly renowned experts gives an in-depth overview, illustrating the superiority of well-designed hybrid materials and their potential applications.

  18. Thermoelectric materials having porosity

    SciTech Connect

    Heremans, Joseph P.; Jaworski, Christopher M.; Jovovic, Vladimir; Harris, Fred

    2014-08-05

    A thermoelectric material and a method of making a thermoelectric material are provided. In certain embodiments, the thermoelectric material comprises at least 10 volume percent porosity. In some embodiments, the thermoelectric material has a zT greater than about 1.2 at a temperature of about 375 K. In some embodiments, the thermoelectric material comprises a topological thermoelectric material. In some embodiments, the thermoelectric material comprises a general composition of (Bi.sub.1-xSb.sub.x).sub.u(Te.sub.1-ySe.sub.y).sub.w, wherein 0.ltoreq.x.ltoreq.1, 0.ltoreq.y.ltoreq.1, 1.8.ltoreq.u.ltoreq.2.2, 2.8.ltoreq.w.ltoreq.3.2. In further embodiments, the thermoelectric material includes a compound having at least one group IV element and at least one group VI element. In certain embodiments, the method includes providing a powder comprising a thermoelectric composition, pressing the powder, and sintering the powder to form the thermoelectric material.

  19. Fluorinated elastomeric materials

    DOEpatents

    Lagow, Richard J.; Dumitru, Earl T.

    1986-11-04

    This invention relates to a method of making perfluorinated elastomeric materials, and to materials made by such methods. In the full synthetic scheme, a partially fluorinated polymeric compound, with moieties to prevent crystallization, is created. It is then crosslinked to a desired degree, then perfluorinated. Various intermediate materials, such as partially fluorinated crosslinked polymers, have useful properties, and are or may become commercially available. One embodiment of this invention therefore relates to perfluorination of a selected partially fluorinated, crosslinked material, which is one step of the full synthetic scheme.

  20. Fluorinated elastomeric materials

    DOEpatents

    Lagow, Richard J.; Dumitru, Earl T.

    1990-02-13

    This invention relates to a method of making perfluorinated elastomeric materials, and to materials made by such methods. In the full synthetic scheme, a partially fluorinated polymeric compound, with moieties to prevent crystallization, is created. It is then crosslinked to a desired degree, then perfluorinated. Various intermediate materials, such as partially fluorinated crosslinked polymers, have useful properties, and are or may become commercially available. One embodiment of this invention therefore relates to perfluorination of a selected partially fluorinated, crosslinked material, which is one step of the full synthetic scheme.

  1. Ceramic breeder materials

    SciTech Connect

    Johnson, C.E.; Kummerer, K.R.; Roth, E.

    1987-01-01

    Ceramic materials are under investigation as potential breeder material in fusion reactors. This paper will review candidate materials with respect to fabrication routes and characterization, properties in as-fabricated and irradiated condition, and experimental results from laboratory and inpile investigations on tritium transport and release. Also discussed are the resources of beryllium, which is being considered as a neutron multiplier. The comparison of ceramic properties that is attempted here aims at the identification of the most-promising material for use in a tritium breeding blanket. 82 refs., 12 figs., 5 tabs.

  2. [Material recovery from waste].

    PubMed

    Wogrolly, E

    1983-09-01

    Reclamation of raw material from refuse is demonstrated by two practical examples. In numerous countries sorting plants were set up at considerable expense for the purpose of reclaiming plastic material from household refuse. Most of these plants are struggling more or less with difficulties as a result of technical and particularly economic problems. A market for reclaimed raw materials scarcely exists. This applies most particularly to the reclamation of plastics from household refuse. As long as the operating costs, especially the energy costs, exceed the proceeds obtained for regranulated material, "recycling" will be to no purpose. At present, reclaiming energy from refuse seems to hold out better prospects of success. PMID:6649995

  3. Flexible Material Systems Testing

    NASA Technical Reports Server (NTRS)

    Lin, John K.; Shook, Lauren S.; Ware, Joanne S.; Welch, Joseph V.

    2010-01-01

    An experimental program has been undertaken to better characterize the stress-strain characteristics of flexible material systems to support a NASA ground test program for inflatable decelerator material technology. A goal of the current study is to investigate experimental methods for the characterization of coated woven material stiffness. This type of experimental mechanics data would eventually be used to define the material inputs of fluid-structure interaction simulation models. The test methodologies chosen for this stress-strain characterization are presented along with the experimental results.

  4. Materials for Slack Diaphragms

    NASA Technical Reports Server (NTRS)

    Puschmann, Traute

    1940-01-01

    This report deals with systematic experiments carried out on five diaphragm materials with different pretreatment, for the purpose of ascertaining the suitability of such materials for slack diaphragms. The relationship of deflection and load, temperature and moisture, was recorded. Of the explored materials, synthetic leather, balloon cloth, goldbeaters skin, Igelit and Buna, synthetic leather treated with castor oil is the most suitable material for the small pressure range required. Balloon cloth is nearly as good, while goldbeaters skin, Igelit and Buna were found to be below the required standards.

  5. The Materials Genome Project

    NASA Astrophysics Data System (ADS)

    Aourag, H.

    2008-09-01

    In the past, the search for new and improved materials was characterized mostly by the use of empirical, trial- and-error methods. This picture of materials science has been changing as the knowledge and understanding of fundamental processes governing a material's properties and performance (namely, composition, structure, history, and environment) have increased. In a number of cases, it is now possible to predict a material's properties before it has even been manufactured thus greatly reducing the time spent on testing and development. The objective of modern materials science is to tailor a material (starting with its chemical composition, constituent phases, and microstructure) in order to obtain a desired set of properties suitable for a given application. In the short term, the traditional "empirical" methods for developing new materials will be complemented to a greater degree by theoretical predictions. In some areas, computer simulation is already used by industry to weed out costly or improbable synthesis routes. Can novel materials with optimized properties be designed by computers? Advances in modelling methods at the atomic level coupled with rapid increases in computer capabilities over the last decade have led scientists to answer this question with a resounding "yes'. The ability to design new materials from quantum mechanical principles with computers is currently one of the fastest growing and most exciting areas of theoretical research in the world. The methods allow scientists to evaluate and prescreen new materials "in silico" (in vitro), rather than through time consuming experimentation. The Materials Genome Project is to pursue the theory of large scale modeling as well as powerful methods to construct new materials, with optimized properties. Indeed, it is the intimate synergy between our ability to predict accurately from quantum theory how atoms can be assembled to form new materials and our capacity to synthesize novel materials atom

  6. LDEF materials overview

    NASA Technical Reports Server (NTRS)

    Stein, Bland A.

    1993-01-01

    The flight and retrieval of the National Aeronautics and Space Administration's Long Duration Exposure Facility (LDEF) provided an opportunity for the study of the low-Earth orbit (LEO) environment and long-duration space environmental effects (SEE) on materials that is unparalleled in the history of the U.S. Space Program. The 5-year, 9-month flight of LDEF greatly enhanced the potential value of all materials on LDEF to the international SEE community, compared to that of the original 1-year flight plan. The remarkable flight attitude stability of LDEF enables specific analyses of individual and combined effects of LEO environmental parameters on identical materials on the same space vehicle. NASA recognized this potential by forming the LDEF Space Environmental Effects on Materials Special Investigation Group (MSIG) to address the greatly expanded materials and LEO space environment analysis opportunities available in the LDEF structure, experiment trays, and corollary measurements so that the combined value of all LDEF materials data to current and future space missions will be addressed and documented. An overview of the interim LDEF materials findings of the principal investigators and the Materials Special Investigation Group is provided. These revelations are based on observations of LEO environmental effects on materials made in space during LDEF retrieval and during LDEF tray deintegration at the Kennedy Space Center, and on findings of approximately 1.5 years of laboratory analyses of LDEF materials by the LDEF materials scientists. These findings were extensively reviewed and discussed at the MSIG-sponsored LDEF Materials Workshop '91. The results are presented in a format that categorizes the revelations as 'clear findings' or 'obscure preliminary findings' (and progress toward their resolution), plus resultant needs for new space materials developments and ground simulation testing/analytical modeling, in seven categories: materials

  7. Materials derived from biomass/biodegradable materials.

    PubMed

    Luzier, W D

    1992-02-01

    Interest in biodegradable plastics made from renewable resources has increased significantly in recent years. PHBV (polyhydroxybutyrate-polyhydroxyvalerate) copolymers are good examples of this type of materials. This paper provides an overview of the manufacturing process, properties, biodegradability, and application/commercial issues associated with PHBV copolymers. They are naturally produced by bacteria from agricultural raw materials, and they can be processed to make a variety of useful products, where their biodegradability and naturalness are quite beneficial. PHBV copolymers are still in the first stage of commercialization. But they are presented in this paper as an example of how new technology can help meet society's needs for plastics and a clean environment. PMID:1736301

  8. Biogenic Impact on Materials

    NASA Astrophysics Data System (ADS)

    Stephan, Ina; Askew, Peter; Gorbushina, Anna; Grinda, Manfred; Hertel, Horst; Krumbein, Wolfgang; Müller, Rolf-Joachim; Pantke, Michael; Plarre, Rüdiger (Rudy); Schmitt, Guenter; Schwibbert, Karin

    Materials as constituents of products or components of technical systems rarely exist in isolation and many must cope with exposure in the natural world. This chapter describes methods that simulate how a material is influenced through contact with living systems such as microorganisms and arthropods. Both unwanted and desirable interactions are considered. This biogenic impact on materials is intimately associated with the environment to which the material is exposed (Materials-Environment Interaction, Chap. 15). Factors such as moisture, temperature and availability of food sources all have a significant influence on biological systems. Corrosion (Chap. 12) and wear (Chap. 13) can also be induced or enhanced in the presence of microorganisms. Section 14.1 introduces the categories between desired (biodegradation) and undesired (biodeterioration) biological effects on materials. It also introduces the role of biocides for the protection of materials. Section 14.2 describes the testing of wood as a building material especially against microorganisms and insects. Section 14.3 characterizes the test methodologies for two other groups of organic materials, namely polymers (Sect. 14.3.1) and paper and textiles (Sect. 14.3.2). Section 14.4 deals with the susceptibility of inorganic materials such as metals (Sect. 14.4.1), concrete (Sect. 14.4.2) and ceramics (Sect. 14.4.3) to biogenic impact. Section 14.5 treats the testing methodology concerned with the performance of coatings and coating materials. In many of these tests specific strains of organisms are employed. It is vital that these strains retain their ability to utilize/attack the substrate from which they were isolated, even when kept for many years in the laboratory. Section 14.6 therefore considers the importance of maintaining robust and representative test organisms that are as capable of utilizing a substrate as their counterparts in nature such that realistic predictions of performance can be made.

  9. Nanoprobes, nanostructured materials and solid state materials

    NASA Astrophysics Data System (ADS)

    Yin, Houping

    2005-07-01

    Novel templates have been developed to prepare nanostructured porous materials through nonsurfactant templated pathway. And new applications of these materials, such as drug delivery and molecular imprinting, have been explored. The relationship between template content and pore structure has been investigated. The composition and pore structures were studied in detail using IR, TGA, SEM, TEM, BET and XRD. The obtained mesoporous materials have tunable diameters in the range of 2--12 nm. Due to the many advantages of this nonsurfactant templated pathway, such as environment friendly and biocompatibility, controlled release of antibiotics in the nanoporous materials were studied. The in vitro release properties were found to depend on the silica structures which were well tuned by varying the template content. A controlled long-term release pattern of vancomycin was achieved when the template content was 30 wt% or lower. Nanoscale electrochemical probes with dimensions as small as 50 nm in diameter and 1--2 mum in length were fabricated using electron beam deposition on the apex of conventional micron size electrodes. The electroactive region was limited to the extreme tip of the nanoprobe by coating with an insulating polymer and re-opening of the coating at the extreme tip. The novel nanoelectrodes thus prepared were employed to probe neurons in mouse brain slice and the results suggest that the nanoprobes were capable of recording neuronal excitatory postsynaptic potential signals. Interesting solid state chemistry was found in oxygenated iron phthalocyanine. Their Mossbauer spectra show the formation of four oxygenated species apart from the unoxygenated parent compound. The oxygen-bridged compounds formed in the solid matrix bear no resemblance to the one formed by solution chemistry. Tentative assignment of species has been made with the help of Mossbauer and IR spectroscopy. An effort to modify aniline trimer for potential nanoelectronics applications and to

  10. Materials characterization on efforts for ablative materials

    NASA Technical Reports Server (NTRS)

    Tytula, Thomas P.; Schad, Kristin C.; Swann, Myles H.

    1992-01-01

    Experimental efforts to develop a new procedure to measure char depth in carbon phenolic nozzle material are described. Using a Shor Type D Durometer, hardness profiles were mapped across post fired sample blocks and specimens from a fired rocket nozzle. Linear regression was used to estimate the char depth. Results are compared to those obtained from computed tomography in a comparative experiment. There was no significant difference in the depth estimates obtained by the two methods.

  11. The New Room Arrangement as a Teaching Strategy = La Nueva Organizacion del Salon como Estrategia Educativa.

    ERIC Educational Resources Information Center

    Dodge, Diane Trister

    Many typical classroom behavior problems--running in the classroom, inability to make choices, failure to stick with activities, fighting over toys, and poor use of materials-- can be traced to how the room is arranged and how materials are displayed. By making a few changes in the classroom environment, early childhood teachers can create a…

  12. Detecting Illicit Nuclear Materials

    SciTech Connect

    Kouzes, Richard T.

    2005-09-01

    The threat that weapons of mass destruction might enter the United States has led to a number of efforts for the detection and interdiction of nuclear, radiological, chemical, and biological weapons at our borders. There have been multiple deployments of instrumentation to detect radiation signatures to interdict radiological material, including weapons and weapons material worldwide.

  13. About Learning Materials.

    ERIC Educational Resources Information Center

    Klein, M. Frances

    This handbook is intended for those persons who have the responsibility for selecting learning materials for student use. The primary emphasis is on learning materials intended for wide distribution, such as those produced by commercial publishers. An annotated listing is provided of approximately 40 resource publications dealing with the…

  14. Hydrocarbonaceous material upgrading method

    SciTech Connect

    Brecher, Lee E.; Mones, Charles G.; Guffey, Frank D.

    2015-06-02

    A hydrocarbonaceous material upgrading method may involve a novel combination of heating, vaporizing and chemically reacting hydrocarbonaceous feedstock that is substantially unpumpable at pipeline conditions, and condensation of vapors yielded thereby, in order to upgrade that feedstock to a hydrocarbonaceous material condensate that meets crude oil pipeline specification.

  15. Thermal Protection Materials

    NASA Technical Reports Server (NTRS)

    Johnson, Sylvia M.

    2011-01-01

    Thermal protection materials and systems (TPS) are required to protect a vehicle returning from space or entering an atmosphere. The selection of the material depends on the heat flux, heat load, pressure, and shear and other mechanical loads imposed on the material, which are in turn determined by the vehicle configuration and size, location on the vehicle, speed, a trajectory, and the atmosphere. In all cases the goal is to use a material that is both reliable and efficient for the application. Reliable materials are well understood and have sufficient test data under the appropriate conditions to provide confidence in their performance. Efficiency relates to the behavior of a material under the specific conditions that it encounters TPS that performs very well at high heat fluxes may not be efficient at lower heat fluxes. Mass of the TPS is a critical element of efficiency. This talk will review the major classes of TPS, reusable or insulating materials and ablators. Ultra high temperature ceramics for sharp leading edges will also be reviewed. The talk will focus on the properties and behavior of these materials.

  16. MULTISCALE PHENOMENA IN MATERIALS

    SciTech Connect

    A. BISHOP

    2000-09-01

    This project developed and supported a technology base in nonequilibrium phenomena underpinning fundamental issues in condensed matter and materials science, and applied this technology to selected problems. In this way the increasingly sophisticated synthesis and characterization available for classes of complex electronic and structural materials provided a testbed for nonlinear science, while nonlinear and nonequilibrium techniques helped advance our understanding of the scientific principles underlying the control of material microstructure, their evolution, fundamental to macroscopic functionalities. The project focused on overlapping areas of emerging thrusts and programs in the Los Alamos materials community for which nonlinear and nonequilibrium approaches will have decisive roles and where productive teamwork among elements of modeling, simulations, synthesis, characterization and applications could be anticipated--particularly multiscale and nonequilibrium phenomena, and complex matter in and between fields of soft, hard and biomimetic materials. Principal topics were: (i) Complex organic and inorganic electronic materials, including hard, soft and biomimetic materials, self-assembly processes and photophysics; (ii) Microstructure and evolution in multiscale and hierarchical materials, including dynamic fracture and friction, dislocation and large-scale deformation, metastability, and inhomogeneity; and (iii) Equilibrium and nonequilibrium phases and phase transformations, emphasizing competing interactions, frustration, landscapes, glassy and stochastic dynamics, and energy focusing.

  17. NBS: materials measurements

    SciTech Connect

    Manning, J.R.

    1981-06-01

    Measurement of materials properties and thermophysical properties is described. The topics discussed are: surface tensions and their variations with temperature, impurities' convection during unidirectional solidification, measurement of high temperature thermophysical properties of liquid and solid tungsten, thermodynamic properties of refractory materials at high temperatures, and experimental and theoretical studies in wetting and multilayer adsorption.

  18. MATERIAL TRACKING USING LANMAS

    SciTech Connect

    Armstrong, F.

    2010-06-07

    LANMAS is a transaction-based nuclear material accountability software product developed to replace outdated and legacy accountability systems throughout the DOE. The core underlying purpose of LANMAS is to track nuclear materials inventory and report transactions (movement, mixing, splitting, decay, etc.) to the Nuclear Materials Management and Safeguards System (NMMSS). While LANMAS performs those functions well, there are many additional functions provided by the software product. As a material is received onto a site or created at a site, its entire lifecycle can be tracked in LANMAS complete to its termination of safeguards. There are separate functions to track material movements between and within material balance areas (MBAs). The level of detail for movements within a MBA is configurable by each site and can be as high as a site designation or as detailed as building/room/rack/row/position. Functionality exists to track the processing of materials, either as individual items or by modeling a bulk process as an individual item to track inputs and outputs from the process. In cases where sites have specialized needs, the system is designed to be flexible so that site specific functionality can be integrated into the product. This paper will demonstrate how the software can be used to input material into an account and track it to its termination of safeguards.

  19. Materials Science and Engineering

    SciTech Connect

    Lesuer, D.R.

    1993-03-01

    Five papers are included: processing/characterization of laminated metal composites, casting process modeling, characterizing the failure of composite materials, fiber-optic Raman spectroscopy for cure monitoring of advanced polymer composites, and modeling superplastic materials. The papers are processed separately for the data base.

  20. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Loewy, R. G.; Wiberley, S. E.

    1985-01-01

    Various topics relating to composite structural materials for use in aircraft structures are discussed. The mechanical properties of high performance carbon fibers, carbon fiber-epoxy interface bonds, composite fractures, residual stress in high modulus and high strength carbon fibers, fatigue in composite materials, and the mechanical properties of polymeric matrix composite laminates are among the topics discussed.

  1. Immediacy of Course Materials.

    ERIC Educational Resources Information Center

    Brook, Chris

    1979-01-01

    The growth of the Open University has led to attempts to increase the efficiency of the whole operation, such as prepackaging of teaching materials and advanced scheduling and planning of new courses. Effects of such policies on tutor-student links and the immediacy of materials are discussed. (AF)

  2. MATERIALS FOR MODERNIZATION.

    ERIC Educational Resources Information Center

    JACKSON, R. GRAHAM

    CHOICES AND ISSUES IN SELECTING MATERIALS FOR MODERNIZATION OF SCHOOL BUILDINGS ARE DISCUSSED IN THIS REPORT. BACKGROUND INFORMATION IS INTRODUCED IN TERMS OF REASONS FOR ABANDONMENT, THE CAUSES AND EFFECTS OF SCHOOL BUILDING OBSOLESCENCE, AND PROBLEMS IN THE MODERNIZATION PROCESS. INTERIOR PARTITIONS ARE DISCUSSED IN TERMS OF BUILDING MATERIALS,…

  3. Environmental materials and interfaces

    SciTech Connect

    Not Available

    1991-11-01

    A workshop that explored materials and interfaces research needs relevant to national environmental concerns was conducted at Pacific Northwest Laboratory. The purposes of the workshop were to refine the scientific research directions being planned for the Materials and Interface Program in the Molecular Science Research Center (MSRC) and further define the research and user equipment to the included as part of the proposed Environmental and Molecular Science Laboratory (EMSL). Three plenary information sessions served to outline the background, objectives, and status of the MSRC and EMSL initiatives; selected specific areas with environmentally related materials; and the status of capabilities and facilities planned for the EMSL. Attention was directed to four areas where materials and interface science can have a significant impact on prevention and remediation of environmental problems: in situ detection and characterization of hazardous wastes (sensors), minimization of hazardous waste (separation membranes, ion exchange materials, catalysts), waste containment (encapsulation and barrier materials), and fundamental understanding of contaminant transport mechanisms. During all other sessions, the participants were divided into three working groups for detailed discussion and the preparation of a written report. The working groups focused on the areas of interface structure and chemistry, materials and interface stability, and materials synthesis. These recommendations and suggestions for needed research will be useful for other researchers in proposing projects and for suggesting collaborative work with MSRC researchers. 1 fig.

  4. Nanocrystalline Heterojunction Materials

    DOEpatents

    Elder, Scott H.; Su, Yali; Gao, Yufei; Heald, Steve M.

    2004-02-03

    Mesoporous nanocrystalline titanium dioxide heterojunction materials and methods of making the same are disclosed. In one disclosed embodiment, materials comprising a core of titanium dioxide and a shell of a molybdenum oxide exhibit a decrease in their photoadsorption energy as the size of the titanium dioxide core decreases.

  5. Nanocrystalline heterojunction materials

    DOEpatents

    Elder, Scott H.; Su, Yali; Gao, Yufei; Heald, Steve M.

    2003-07-15

    Mesoporous nanocrystalline titanium dioxide heterojunction materials are disclosed. In one disclosed embodiment, materials comprising a core of titanium dioxide and a shell of a molybdenum oxide exhibit a decrease in their photoadsorption energy as the size of the titanium dioxide core decreases.

  6. Marine Education Materials System.

    ERIC Educational Resources Information Center

    Gammisch, Sue; Gray, Kevin

    1980-01-01

    Described is a marine education materials clearinghouse, the Marine Education Materials System (MEMS). MEMS classifies marine education documents and reproduces them on microfiche for distribution. There are 25 distribution centers, each of which has a collection of documents and provides assistance on a request basis to teachers. (Author/DS)

  7. Scintillator materials for calorimetry

    SciTech Connect

    Weber, M.J.

    1994-09-01

    Requirements for fast, dense scintillator materials for calorimetry in high energy physics and approaches to satisfying these requirements are reviewed with respect to possible hosts and luminescent species. Special attention is given to cerium-activated crystals, core-valence luminescence, and glass scintillators. The present state of the art, limitations, and suggestions for possible new scintillator materials are presented.

  8. Sex Education Materials.

    ERIC Educational Resources Information Center

    Singer-Magdoff, Laura

    1969-01-01

    After briefly discussing the philosophy of sex education and appraising generally the nature of the instructional methods and materials currently in use in the schools, the author provides brief but incisive reviews of a number of films, filmstrips, and other instructional materials dealing with sex. The reviews are continued in the succeeding…

  9. Gravitation in Material Media

    ERIC Educational Resources Information Center

    Ridgely, Charles T.

    2011-01-01

    When two gravitating bodies reside in a material medium, Newton's law of universal gravitation must be modified to account for the presence of the medium. A modified expression of Newton's law is known in the literature, but lacks a clear connection with existing gravitational theory. Newton's law in the presence of a homogeneous material medium…

  10. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Wiberley, S. E.

    1978-01-01

    The purpose of the RPI composites program is to develop advanced technology in the areas of physical properties, structural concepts and analysis, manufacturing, reliability and life prediction. Concommitant goals are to educate engineers to design and use composite materials as normal or conventional materials. A multifaceted program was instituted to achieve these objectives.

  11. Material Fatigue Testing System

    NASA Technical Reports Server (NTRS)

    Gilley, P. J. (Inventor)

    1973-01-01

    A system for cyclicly applying a varying load to a material under test is described. It includes a load sensor which senses the magnitude of load being applied to a material, and, upon sensing a selected magnitude of loading, causes the load to be maintained for a predetermined time and then cause the system to resume cyclical loading.

  12. Flexible materials technology

    NASA Technical Reports Server (NTRS)

    Steurer, W. H.

    1980-01-01

    A survey of all presently defined or proposed large space systems indicated an ever increasing demand for flexible components and materials, primarily as a result of the widening disparity between the stowage space of launch vehicles and the size of advanced systems. Typical flexible components and material requirements were identified on the basis of recurrence and/or functional commonality. This was followed by the evaluation of candidate materials and the search for material capabilities which promise to satisfy the postulated requirements. Particular attention was placed on thin films, and on the requirements of deployable antennas. The assessment of the performance of specific materials was based primarily on the failure mode, derived from a detailed failure analysis. In view of extensive on going work on thermal and environmental degradation effects, prime emphasis was placed on the assessment of the performance loss by meteoroid damage. Quantitative data were generated for tension members and antenna reflector materials. A methodology was developed for the representation of the overall materials performance as related to systems service life. A number of promising new concepts for flexible materials were identified.

  13. Selection of Music Materials

    ERIC Educational Resources Information Center

    Luttmann, Stephen

    2004-01-01

    The conscientious selection of music materials requires an understanding of the needs of the public being served at least as much as it requires subject competence on the part of the selector. Online and print resources are available to aid in the selection of music materials in all formats, the most important of which are books, scores, audio and…

  14. Materials inventory management manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    This NASA Materials Inventory Management Manual (NHB 4100.1) is issued pursuant to Section 203(c)(1) of the National Aeronautics and Space Act of 1958 (42 USC 2473). It sets forth policy, performance standards, and procedures governing the acquisition, management and use of materials. This Manual is effective upon receipt.

  15. Measurements and material accounting

    SciTech Connect

    Hammond, G.A. )

    1989-11-01

    The DOE role for the NBL in safeguarding nuclear material into the 21st century is discussed. Development of measurement technology and reference materials supporting requirements of SDI, SIS, AVLIS, pyrochemical reprocessing, fusion, waste storage, plant modernization program, and improved tritium accounting are some of the suggested examples.

  16. Fatigue of restorative materials.

    PubMed

    Baran, G; Boberick, K; McCool, J

    2001-01-01

    Failure due to fatigue manifests itself in dental prostheses and restorations as wear, fractured margins, delaminated coatings, and bulk fracture. Mechanisms responsible for fatigue-induced failure depend on material ductility: Brittle materials are susceptible to catastrophic failure, while ductile materials utilize their plasticity to reduce stress concentrations at the crack tip. Because of the expense associated with the replacement of failed restorations, there is a strong desire on the part of basic scientists and clinicians to evaluate the resistance of materials to fatigue in laboratory tests. Test variables include fatigue-loading mode and test environment, such as soaking in water. The outcome variable is typically fracture strength, and these data typically fit the Weibull distribution. Analysis of fatigue data permits predictive inferences to be made concerning the survival of structures fabricated from restorative materials under specified loading conditions. Although many dental-restorative materials are routinely evaluated, only limited use has been made of fatigue data collected in vitro: Wear of materials and the survival of porcelain restorations has been modeled by both fracture mechanics and probabilistic approaches. A need still exists for a clinical failure database and for the development of valid test methods for the evaluation of composite materials. PMID:11603506

  17. NBS: Materials measurements

    NASA Technical Reports Server (NTRS)

    Manning, J. R.

    1981-01-01

    Measurement of materials properties and thermophysical properties is described. The topics discussed are: surface tensions and their variations with temperature and impurities; convection during unidirectional solidification: measurement of high temperature thermophysical properties of tungsten liquid and solid; thermodynamic properties of refractory materials at high temperatures; and experimental and theoretical studies in wetting and multilayer adsorption.

  18. Materials Science and Technology.

    ERIC Educational Resources Information Center

    Piippo, Steven W.

    1989-01-01

    Describes a materials science and technology course for high school students, which combines chemistry, physics, engineering, math, technology education, and crafts to introduce students to the atomic make-up and physical properties of materials and to apply this knowledge in creative activities. (SK)

  19. 78 FR 42805 - Nixon Presidential Historical Materials: Opening of Materials

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-17

    ... RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration. ] ACTION: Notice of Opening of Additional Nixon Materials. SUMMARY: This notice announces the opening of additional Nixon Presidential Historical Materials by the...

  20. 76 FR 27092 - Nixon Presidential Historical Materials: Opening of Materials

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-10

    ... RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration. ACTION: Notice of opening of additional materials. SUMMARY: This notice announces the opening of additional Nixon Presidential Historical Materials by the Richard...

  1. 77 FR 31400 - Nixon Presidential Historical Materials: Opening of Materials

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-25

    ... RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration. ACTION: Notice of Opening of Additional Materials. SUMMARY: This notice announces the opening of additional Nixon Presidential Historical Materials by the Richard...

  2. 76 FR 35918 - Nixon Presidential Historical Materials; Opening of Materials

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-20

    ... RECORDS ADMINISTRATION Nixon Presidential Historical Materials; Opening of Materials AGENCY: National Archives and Records Administration. ACTION: Notice of Opening of Additional Materials. SUMMARY: This notice announces the opening of additional Nixon Presidential Historical Materials by the Richard...

  3. 77 FR 58179 - Nixon Presidential Historical Materials: Opening of Materials

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-19

    ... RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration ACTION: Notice of opening of additional materials SUMMARY: This notice announces the opening of additional Nixon Presidential Historical Materials by the Richard...

  4. 76 FR 62856 - Nixon Presidential Historical Materials: Opening of Materials

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-11

    ... RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration. ACTION: Notice of opening of additional materials. SUMMARY: This notice announces the opening of Nixon Presidential Historical Materials by the Richard Nixon...

  5. 75 FR 68384 - Nixon Presidential Historical Materials: Opening of Materials

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-05

    ... RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration. ACTION: Notice of Opening of Additional Materials. SUMMARY: This notice announces the opening of additional Nixon Presidential Historical Materials by the Richard...

  6. 75 FR 30863 - Nixon Presidential Historical Materials: Opening of Materials

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-02

    ... RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration. ACTION: Notice of opening of additional materials. SUMMARY: This notice announces the opening of additional Nixon Presidential Historical Materials by the Richard...

  7. Fingerprinting of Materials

    NASA Technical Reports Server (NTRS)

    Workman, Gary L

    1992-01-01

    Recent issues emerging in our fiscal and ecological environments have promulgated that federal agencies shall promote activities which respond to the improvement of both. In response to these developments, the National Aeronautics and Space Administration (NASA) has undertaken an innovative approach to improve the control of materials used in all NASA manufacturing activities. In concert with this goal, NASA is requiring that its contractors and their sub-contractors perform a more intensive consolidation of technologies that can provide an accounting of materials, which includes in-coming materials, materials in process, end-products and waste materials. The purpose of this handbook is to provide guidelines to NASA and its contractor personnel for the planning and implementation of chemical fingerprinting programs and to illustrate the chemical and statistical fundamentals needed for successful use of chemical fingerprinting.

  8. Architected Cellular Materials

    NASA Astrophysics Data System (ADS)

    Schaedler, Tobias A.; Carter, William B.

    2016-07-01

    Additive manufacturing enables fabrication of materials with intricate cellular architecture, whereby progress in 3D printing techniques is increasing the possible configurations of voids and solids ad infinitum. Examples are microlattices with graded porosity and truss structures optimized for specific loading conditions. The cellular architecture determines the mechanical properties and density of these materials and can influence a wide range of other properties, e.g., acoustic, thermal, and biological properties. By combining optimized cellular architectures with high-performance metals and ceramics, several lightweight materials that exhibit strength and stiffness previously unachievable at low densities were recently demonstrated. This review introduces the field of architected materials; summarizes the most common fabrication methods, with an emphasis on additive manufacturing; and discusses recent progress in the development of architected materials. The review also discusses important applications, including lightweight structures, energy absorption, metamaterials, thermal management, and bioscaffolds.

  9. Materials Integrating Photochemical Upconversion.

    PubMed

    McCusker, Catherine E; Castellano, Felix N

    2016-04-01

    This review features recent experimental work focused on the preparation and characterization of materials that integrate photochemical upconversion derived from sensitized triplet-triplet annihilation, resulting in the conversion of low energy photons to higher energy light, thereby enabling numerous wavelength-shifting applications. Recent topical developments in upconversion include encapsulating or rigidifying fluid solutions to give them mechanical strength, adapting inert host materials to enable upconversion, and using photoactive materials that incorporate the sensitizer and/or the acceptor. The driving force behind translating photochemical upconversion from solution into hard and soft materials is the incorporation of upconversion into devices and other applications. At present, some of the most promising applications of upconversion materials include imaging and fluorescence microscopy, photoelectrochemical devices, water disinfection, and solar cell enhancement. PMID:27573144

  10. Extraterrestrial materials processing

    NASA Technical Reports Server (NTRS)

    Steurer, W. H.

    1982-01-01

    The first year results of a multi-year study of processing extraterrestrial materials for use in space are summarized. Theoretically, there are potential major advantages to be derived from the use of such materials for future space endeavors. The types of known or postulated starting raw materials are described including silicate-rich mixed oxides on the Moon, some asteroids and Mars; free metals in some asteroids and in small quantities in the lunar soil; and probably volatiles like water and CO2 on Mars and some asteroids. Candidate processes for space materials are likely to be significantly different from their terrestrial counterparts largely because of: absence of atmosphere; lack of of readily available working fluids; low- or micro-gravity; no carbon-based fuels; readily available solar energy; and severe constraints on manned intervention. The extraction of metals and oxygen from lunar material by magma electrolysis or by vapor/ion phase separation appears practical.

  11. Porous Organic Molecular Materials

    SciTech Connect

    Tian, Jian; Thallapally, Praveen K.; McGrail, B. Peter

    2012-01-01

    Most nanoporous materials with molecular-scale pores are extended frameworks composed of directional covalent or coordination bonding, such as porous metal-organic frameworks and organic network polymers. By contrast, nanoporous materials comprised of discrete organic molecules, between which there are only weak non-covalent interactions, are seldom encountered. Indeed, most organic molecules pack efficiently in the solid state to minimize the void volume, leading to non-porous materials. In recent years, a significant number of nanoporous organic molecular materials, which may be either crystalline or amorphous, have been confirmed by the studies of gas adsorption and they are surveyed in this Highlight. In addition, the possible advantages of porous organic molecular materials over porous networks are discussed.

  12. Materials of Gasification

    SciTech Connect

    2005-09-15

    The objective of this project was to accumulate and establish a database of construction materials, coatings, refractory liners, and transitional materials that are appropriate for the hardware and scale-up facilities for atmospheric biomass and coal gasification processes. Cost, fabricability, survivability, contamination, modes of corrosion, failure modes, operational temperatures, strength, and compatibility are all areas of materials science for which relevant data would be appropriate. The goal will be an established expertise of materials for the fossil energy area within WRI. This would be an effort to narrow down the overwhelming array of materials information sources to the relevant set which provides current and accurate data for materials selection for fossil fuels processing plant. A significant amount of reference material on materials has been located, examined and compiled. The report that describes these resources is well under way. The reference material is in many forms including texts, periodicals, websites, software and expert systems. The most important part of the labor is to refine the vast array of available resources to information appropriate in content, size and reliability for the tasks conducted by WRI and its clients within the energy field. A significant has been made to collate and capture the best and most up to date references. The resources of the University of Wyoming have been used extensively as a local and assessable location of information. As such, the distribution of materials within the UW library has been added as a portion of the growing document. Literature from recent journals has been combed for all pertinent references to high temperature energy based applications. Several software packages have been examined for relevance and usefulness towards applications in coal gasification and coal fired plant. Collation of the many located resources has been ongoing. Some web-based resources have been examined.

  13. Materials Research Capabilities

    NASA Technical Reports Server (NTRS)

    Stofan, Andrew J.

    1986-01-01

    Lewis Research Center, in partnership with U.S. industry and academia, has long been a major force in developing advanced aerospace propulsion and power systems. One key aspect that made many of these systems possible has been the availability of high-performance, reliable, and long-life materials. To assure a continuing flow of new materials and processing concepts, basic understanding to guide such innovation, and technological support for development of major NASA systems, Lewis has supported a strong in-house materials research activity. Our researchers have discovered new alloys, polymers, metallic composites, ceramics, coatings, processing techniques, etc., which are now also in use by U.S. industry. This brochure highlights selected past accomplishments of our materials research and technology staff. It also provides many examples of the facilities available with which we can conduct materials research. The nation is now beginning to consider integrating technology for high-performance supersonic/hypersonic aircraft, nuclear space power systems, a space station, and new research areas such as materials processing in space. As we proceed, I am confident that our materials research staff will continue to provide important contributions which will help our nation maintain a strong technology position in these areas of growing world competition. Lewis Research Center, in partnership with U.S. industry and academia, has long been a major force in developing advanced aerospace propulsion and power systems. One key aspect that made many of these systems possible has been the availability of high-performance, reliable, and long-life materials. To assure a continuing flow of new materials and processing concepts, basic understanding to guide such innovation, and technological support for development of major NASA systems, Lewis has supported a strong in-house materials research activity. Our researchers have discovered new alloys, polymers, metallic composites

  14. Materials at LANL

    SciTech Connect

    Taylor, Antoinette J

    2010-01-01

    Exploring the physics, chemistry, and metallurgy of materials has been a primary focus of Los Alamos National Laboratory since its inception. In the early 1940s, very little was known or understood about plutonium, uranium, or their alloys. In addition, several new ionic, polymeric, and energetic materials with unique properties were needed in the development of nuclear weapons. As the Laboratory has evolved, and as missions in threat reduction, defense, energy, and meeting other emerging national challenges have been added, the role of materials science has expanded with the need for continued improvement in our understanding of the structure and properties of materials and in our ability to synthesize and process materials with unique characteristics. Materials science and engineering continues to be central to this Laboratory's success, and the materials capability truly spans the entire laboratory - touching upon numerous divisions and directorates and estimated to include >1/3 of the lab's technical staff. In 2006, Los Alamos and LANS LLC began to redefine our future, building upon the laboratory's established strengths and promoted by strongly interdependent science, technology and engineering capabilities. Eight Grand Challenges for Science were set forth as a technical framework for bridging across capabilities. Two of these grand challenges, Fundamental Understanding of Materials and Superconductivity and Actinide Science. were clearly materials-centric and were led out of our organizations. The complexity of these scientific thrusts was fleshed out through workshops involving cross-disciplinary teams. These teams refined the grand challenge concepts into actionable descriptions to be used as guidance for decisions like our LDRD strategic investment strategies and as the organizing basis for our external review process. In 2008, the Laboratory published 'Building the Future of Los Alamos. The Premier National Security Science Laboratory,' LA-UR-08

  15. NSUF Irradiated Materials Library

    SciTech Connect

    Cole, James Irvin

    2015-09-01

    The Nuclear Science User Facilities has been in the process of establishing an innovative Irradiated Materials Library concept for maximizing the value of previous and on-going materials and nuclear fuels irradiation test campaigns, including utilization of real-world components retrieved from current and decommissioned reactors. When the ATR national scientific user facility was established in 2007 one of the goals of the program was to establish a library of irradiated samples for users to access and conduct research through competitively reviewed proposal process. As part of the initial effort, staff at the user facility identified legacy materials from previous programs that are still being stored in laboratories and hot-cell facilities at the INL. In addition other materials of interest were identified that are being stored outside the INL that the current owners have volunteered to enter into the library. Finally, over the course of the last several years, the ATR NSUF has irradiated more than 3500 specimens as part of NSUF competitively awarded research projects. The Logistics of managing this large inventory of highly radioactive poses unique challenges. This document will describe materials in the library, outline the policy for accessing these materials and put forth a strategy for making new additions to the library as well as establishing guidelines for minimum pedigree needed to be included in the library to limit the amount of material stored indefinitely without identified value.

  16. Fissile material detector

    DOEpatents

    Ivanov, Alexander I.; Lushchikov, Vladislav I.; Shabalin, Eugeny P.; Maznyy, Nikita G.; Khvastunov, Michael M.; Rowland, Mark

    2002-01-01

    A detector for fissile materials which provides for integrity monitoring of fissile materials and can be used for nondestructive assay to confirm the presence of a stable content of fissile material in items. The detector has a sample cavity large enough to enable assay of large items of arbitrary configuration, utilizes neutron sources fabricated in spatially extended shapes mounted on the endcaps of the sample cavity, incorporates a thermal neutron filter insert with reflector properties, and the electronics module includes a neutron multiplicity coincidence counter.

  17. RADIOACTIVE MATERIALS SENSORS

    SciTech Connect

    Mayo, Robert M.; Stephens, Daniel L.

    2009-09-15

    Providing technical means to detect, prevent, and reverse the threat of potential illicit use of radiological or nuclear materials is among the greatest challenges facing contemporary science and technology. In this short article, we provide brief description and overview of the state-of-the-art in sensor development for the detection of radioactive materials, as well as an identification of the technical needs and challenges faced by the detection community. We begin with a discussion of gamma-ray and neutron detectors and spectrometers, followed by a description of imaging sensors, active interrogation, and materials development, before closing with a brief discussion of the unique challenges posed in fielding sensor systems.

  18. Encapsulation materials research

    NASA Technical Reports Server (NTRS)

    Willis, P. B.

    1984-01-01

    Encapsulation materials for solar cells were investigated. The different phases consisted of: (1) identification and development of low cost module encapsulation materials; (2) materials reliability examination; and (3) process sensitivity and process development. It is found that outdoor photothermal aging devices (OPT) are the best accelerated aging methods, simulate worst case field conditions, evaluate formulation and module performance and have a possibility for life assessment. Outdoor metallic copper exposure should be avoided, self priming formulations have good storage stability, stabilizers enhance performance, and soil resistance treatment is still effective.

  19. Composite Structural Materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberly, S. E.

    1984-01-01

    The development and application of filamentary composite materials, is considered. Such interest is based on the possibility of using relatively brittle materials with high modulus, high strength, but low density in composites with good durability and high tolerance to damage. Fiber reinforced composite materials of this kind offer substantially improved performance and potentially lower costs for aerospace hardware. Much progress has been made since the initial developments in the mid 1960's. There were only limited applied to the primary structure of operational vehicles, mainly as aircrafts.

  20. Material Challenges and Perspectives

    SciTech Connect

    Choi, Daiwon; Wang, Wei; Yang, Zhenguo

    2011-12-14

    General history and principals of Li-ion battery, characterization techniques and terminology of its operation will be discussed and explained. Current Li-ion battery applications and comparison to other energy storage and conversion systems will be outlined. Chemistry, material and design of currently commercialized Li-ion batteries will be discussed including various electrode materials for cathodes and anodes. The electrode material candidates and its physical and chemical properties including crystal structure, capacity, cycling stability, cost and safety. Also, current limitations of Li-ion batteries will be discussed.

  1. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Loewy, R.; Wiberley, S. E.

    1986-01-01

    Overall emphasis is on basic long-term research in the following categories: constituent materials, composite materials, generic structural elements, processing science technology; and maintaining long-term structural integrity. Research in basic composition, characteristics, and processing science of composite materials and their constituents is balanced against the mechanics, conceptual design, fabrication, and testing of generic structural elements typical of aerospace vehicles so as to encourage the discovery of unusual solutions to present and future problems. Detailed descriptions of the progress achieved in the various component parts of this comprehensive program are presented.

  2. Biomedical materials and devices

    SciTech Connect

    Hanker, J. S. ); Giammara, B. L. )

    1989-01-01

    This conference reports on how biomedical materials and devices are undergoing important changes that require interdisciplinary approaches, innovation expertise, and access to sophisticated preparative and analytical equipment and methodologies. The interaction of materials scientists with biomedical, biotechnological, bioengineering and clinical scientists in the last decade has resulted in major advances in therapy. New therapeutic modalities and bioengineering methods and devices for the continuous removal of toxins or pathologic products present in arthritis, atherosclerosis and malignancy are presented. Novel monitoring and controlled drug delivery systems and discussions of materials such as blood or plasma substitutes, artificial organs, and bone graft substitutes are discussed.

  3. ATS materials/manufacturing

    SciTech Connect

    Karnitz, M.A.; Wright, I.G.; Ferber, M.K.

    1997-11-01

    The Materials/Manufacturing Technology subelement is a part of the base technology portion of the Advanced Turbine Systems (ATS) Program. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. The projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single crystal airfoil manufacturing technologies, materials characterization, and technology information exchange. This paper presents highlights of the activities during the past year. 12 refs., 24 figs., 4 tabs.

  4. Investigating Encrypted Material

    NASA Astrophysics Data System (ADS)

    McGrath, Niall; Gladyshev, Pavel; Kechadi, Tahar; Carthy, Joe

    When encrypted material is discovered during a digital investigation and the investigator cannot decrypt the material then s/he is faced with the problem of how to determine the evidential value of the material. This research is proposing a methodology of extracting probative value from the encrypted file of a hybrid cryptosystem. The methodology also incorporates a technique for locating the original plaintext file. Since child pornography (KP) images and terrorist related information (TI) are transmitted in encrypted format the digital investigator must ask the question Cui Bono? - who benefits or who is the recipient? By doing this the scope of the digital investigation can be extended to reveal the intended recipient.

  5. Electrically conductive composite material

    DOEpatents

    Clough, Roger L.; Sylwester, Alan P.

    1989-01-01

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistant pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like.

  6. Materials for syngas coolers

    NASA Astrophysics Data System (ADS)

    Perkins, R. A.; Morse, G.; Coons, W. C.

    1982-08-01

    A technical basis for materials selection and laboratory testing of practical boiler tube materials which will provide reliable long term service in syngas coolers for coal gasification combined cycle power plants is outlined. The resistance of low alloy steel, stainless steels, and aluminum rich coatings to attach by a high sulfur, medium Btu coal gasification atmosphere was evaluated at 300 to 500 deg C. The materials may have adequate resistance for long time service in radiant coolers operating up to 500 deg C on high sulfur medium Btu gas. Performance is analyzed for thermodynamic and kinetic properties and recommendations for long term tests and development of protective coatings are presented.

  7. Gravity and Granular Materials

    NASA Technical Reports Server (NTRS)

    Behringer, R. P.; Hovell, Daniel; Kondic, Lou; Tennakoon, Sarath; Veje, Christian

    1999-01-01

    We describe experiments that probe a number of different types of granular flow where either gravity is effectively eliminated or it is modulated in time. These experiments include the shaking of granular materials both vertically and horizontally, and the shearing of a 2D granular material. For the shaken system, we identify interesting dynamical phenomena and relate them to standard simple friction models. An interesting application of this set of experiments is to the mixing of dissimilar materials. For the sheared system we identify a new kind of dynamical phase transition.

  8. Materials science and engineering

    SciTech Connect

    Holden, T.M.

    1995-10-01

    The science-based stockpile stewardship program emphasizes a better understanding of how complex components function through advanced computer calculations. Many of the problem areas are in the behavior of materials making up the equipment. The Los Alamos Neutron Science Center (LANSCE) can contribute to solving these problems by providing diagnostic tools to examine parts noninvasively and by providing the experimental tools to understand material behavior in terms of both the atomic structure and the microstructure. Advanced computer codes need experimental information on material behavior in response to stress, temperature, and pressure as input, and they need benchmarking experiments to test the model predictions for the finished part.

  9. Electrically conductive composite material

    DOEpatents

    Clough, R.L.; Sylwester, A.P.

    1988-06-20

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistent pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like. 2 figs.

  10. Phase-change materials handbook

    NASA Technical Reports Server (NTRS)

    Hale, D. V.; Hoover, M. J.; Oneill, M. J.

    1972-01-01

    Handbook describes relationship between phase-change materials and more conventional thermal control techniques and discusses materials' space and terrestrial applications. Material properties of most promising phase-change materials and purposes and uses of metallic filler materials in phase-change material composites are provided.

  11. Unusual spacecraft materials

    NASA Technical Reports Server (NTRS)

    Post, Jonathan V.

    1990-01-01

    For particularly innovative space exploration missions, unusual requirements are levied on the structural components of the spacecraft. In many cases, the preferred solution is the utilization of unusual materials. This trend is forecast to continue. Several hypothetic examples are discussed.

  12. Nuclear material operations manual

    SciTech Connect

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.

  13. Holographic Recording Materials Development

    NASA Technical Reports Server (NTRS)

    Verber, C. M.; Schwerzel, R. E.; Perry, P. J.; Craig, R. A.

    1976-01-01

    Organic photorefractive materials were evaluated for application in a reversible holographic memory system. Representative indigo and thioindigo derivatives and several stilbene derivatives were studied as well as 15, 16-dialkyldihydropyrene derivatives the following goals were achieved: (1) the successful writing of phase holograms in a thioindigo/polymer gel system, (2) the successful writing and erasing of phase holograms in a variety of indigo/polymer gel and indigo/solid polymer systems, and (3) the identification of indigoid dyes and 15, 16-dialkyldihydropyrene derivatives as materials potentially suitable for utilization in an operational system. Photochemical studies of the stilbene, indigo, thioindigo, and dialkyldihydropyrene derivatives in solution and in a variety of polymer matrix materials were conducted with the goal of optimizing the photorefractive behavior of the chemical system as a whole. The spectroscopic properties required of optimal photorefractive materials were identified, and it was shown that both the indigoid dyes and the dialkyldihydropyrenes closely match the required properties.

  14. Indigenous lunar construction materials

    NASA Technical Reports Server (NTRS)

    Rogers, Wayne; Sture, Stein

    1991-01-01

    The objectives are the following: to investigate the feasibility of the use of local lunar resources for construction of a lunar base structure; to develop a material processing method and integrate the method with design and construction of a pressurized habitation structure; to estimate specifications of the support equipment necessary for material processing and construction; and to provide parameters for systems models of lunar base constructions, supply, and operations. The topics are presented in viewgraph form and include the following: comparison of various lunar structures; guidelines for material processing methods; cast lunar regolith; examples of cast basalt components; cast regolith process; processing equipment; mechanical properties of cast basalt; material properties and structural design; and future work.

  15. Lunar material transport vehicle

    NASA Technical Reports Server (NTRS)

    Fisher, Charles D.; Lyons, Douglas; Wilkins, W. Allen, Jr.; Whitehead, Harry C., Jr.

    1988-01-01

    The proposed vehicle, the Lunar Material Transport Vehicle (LMTV), has a mission objective of efficient lunar soil material transport. The LMTV was designed to meet a required set of performance specifications while operating under a given set of constraints. The LMTV is essentially an articulated steering, double-ended dump truck. The vehicle moves on four wheels and has two identical chassis halves. Each half consists of a chassis frame, a material bucket, two wheels with integral curvilinear synchronous motors, a fuel cell and battery arrangement, an electromechanically actuated dumping mechanism, and a powerful microprocessor. The vehicle, as designed, is capable of transporting up to 200 cu ft of material over a one mile round trip per hour. The LMTV is capable of being operated from a variety of sources. The vehicle has been designed as simply as possible with attention also given to secondary usage of components.

  16. Cookoff of energetic materials

    SciTech Connect

    Baer, M.R.; Hobbs, M.L.; Gross, R.J.; Schmitt, R.G.

    1998-09-01

    An overview of cookoff modeling at Sandia National Laboratories is presented aimed at assessing the violence of reaction following cookoff of confined energetic materials. During cookoff, the response of energetic materials is known to involve coupled thermal/chemical/mechanical processes which induce thermal damage to the energetic material prior to the onset of ignition. These damaged states enhance shock sensitivity and lead to conditions favoring self-supported accelerated combustion. Thus, the level of violence depends on the competition between pressure buildup and stress release due to the loss of confinement. To model these complex processes, finite element-based analysis capabilities are being developed which can resolve coupled heat transfer with chemistry, quasi-static structural mechanics and dynamic response. Numerical simulations that assess the level of violence demonstrate the importance of determining material damage in pre- and post-ignition cookoff events.

  17. Tough Composite Materials

    NASA Technical Reports Server (NTRS)

    Vosteen, L. F. (Compiler); Johnson, N. J. (Compiler); Teichman, L. A. (Compiler)

    1984-01-01

    Papers and working group summaries are presented which address composite material behavior and performance improvement. Topic areas include composite fracture toughness and impact characterization, constituent properties and interrelationships, and matrix synthesis and characterization.

  18. CHARACTERIZATION OF DAMAGED MATERIALS

    SciTech Connect

    Hsu, P C; Dehaven, M; McClelland, M; Chidester, S; Maienschein, J L

    2006-06-23

    Thermal damage experiments were conducted on LX-04, LX-10, and LX-17 at high temperatures. Both pristine and damaged samples were characterized for their material properties. A pycnometer was used to determine sample true density and porosity. Gas permeability was measured in a newly procured system (diffusion permeameter). Burn rate was measured in the LLNL strand burner. Weight losses upon thermal exposure were insignificant. Damaged pressed parts expanded, resulting in a reduction of bulk density by up to 10%. Both gas permeabilities and burn rates of the damaged samples increased by several orders of magnitude due to higher porosity and lower density. Moduli of the damaged materials decreased significantly, an indication that the materials became weaker mechanically. Damaged materials were more sensitive to shock initiation at high temperatures. No significant sensitization was observed when the damaged samples were tested at room temperature.

  19. Strongly correlated electronic materials

    SciTech Connect

    Bedell, K.; Albers, R.; Balatsky, A.; Bishop, A.; Bonca, J.; Gubernatis, J.; Gulasci, M.; Silver, R.; Trugman, S.

    1996-04-01

    This is the final report of a 3-year project. Novel electronic materials characterized by strong electronic correlations display a number of unexpected, often extraordinary, properties. These are likely to play a major role in purpose-specific high-technology electronic materials of the future developed for electronic, magnetic, and optical applications. This project sought to develop predictive control of the novel properties by formulating, solving and applying many-body models for the underlying microscopic physics. This predictive control required the development of new analytical and numerical many-body techniques and strategies for materials of varying strengths of interactions, dimensionality and geometry. Results are compared with experiment on classes of novel materials, and the robust techniques are used to predict additional properties and motivate key additional experiments.

  20. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1982-01-01

    The promise of filamentary composite materials, whose development may be considered as entering its second generation, continues to generate intense interest and applications activity. Fiber reinforced composite materials offer substantially improved performance and potentially lower costs for aerospace hardware. Much progress has been achieved since the initial developments in the mid 1960's. Rather limited applications to primary aircraft structure have been made, however, mainly in a material-substitution mode on military aircraft, except for a few experiments currently underway on large passenger airplanes in commercial operation. To fulfill the promise of composite materials completely requires a strong technology base. NASA and AFOSR recognize the present state of the art to be such that to fully exploit composites in sophisticated aerospace structures, the technology base must be improved. This, in turn, calls for expanding fundamental knowledge and the means by which it can be successfully applied in design and manufacture.

  1. Mesoporous carbon materials

    SciTech Connect

    Dai, Sheng; Wang, Xiqing

    2012-02-14

    The invention is directed to a method for fabricating a mesoporous carbon material, the method comprising subjecting a precursor composition to a curing step followed by a carbonization step, the precursor composition comprising: (i) a templating component comprised of a block copolymer, (ii) a phenolic compound or material, (iii) a crosslinkable aldehyde component, and (iv) at least 0.5 M concentration of a strong acid having a pKa of or less than -2, wherein said carbonization step comprises heating the precursor composition at a carbonizing temperature for sufficient time to convert the precursor composition to a mesoporous carbon material. The invention is also directed to a mesoporous carbon material having an improved thermal stability, preferably produced according to the above method.

  2. Degradation of Spacecraft Materials

    NASA Technical Reports Server (NTRS)

    Dever, Joyce; Banks, Bruce; deGroh, Kim; Miller, Sharon

    2004-01-01

    This chapter includes descriptions of specific space environmental threats to exterior spacecraft materials. The scope will be confined to effects on exterior spacecraft surfaces, and will not, therefore, address environmental effects on interior spacecraft systems, such as electronics. Space exposure studies and laboratory simulations of individual and combined space environemntal threats will be summarized. A significant emphasis is placed on effects of Earth orbit environments, because the majority of space missions have been flown in Earth orbits which have provided a significant amount of data on materials effects. Issues associated with interpreting materials degradation results will be discussed, and deficiencies of ground testing will be identified. Recommendations are provided on reducing or preventing space environmental degradation through appropriate materials selection.

  3. Electrically conductive material

    DOEpatents

    Singh, J.P.; Bosak, A.L.; McPheeters, C.C.; Dees, D.W.

    1993-09-07

    An electrically conductive material is described for use in solid oxide fuel cells, electrochemical sensors for combustion exhaust, and various other applications possesses increased fracture toughness over available materials, while affording the same electrical conductivity. One embodiment of the sintered electrically conductive material consists essentially of cubic ZrO[sub 2] as a matrix and 6-19 wt. % monoclinic ZrO[sub 2] formed from particles having an average size equal to or greater than about 0.23 microns. Another embodiment of the electrically conductive material consists essentially at cubic ZrO[sub 2] as a matrix and 10-30 wt. % partially stabilized zirconia (PSZ) formed from particles having an average size of approximately 3 microns. 8 figures.

  4. Dynamics of Granular Materials

    NASA Technical Reports Server (NTRS)

    Behringer, Robert P.

    1996-01-01

    Granular materials exhibit a rich variety of dynamical behavior, much of which is poorly understood. Fractal-like stress chains, convection, a variety of wave dynamics, including waves which resemble capillary waves, l/f noise, and fractional Brownian motion provide examples. Work beginning at Duke will focus on gravity driven convection, mixing and gravitational collapse. Although granular materials consist of collections of interacting particles, there are important differences between the dynamics of a collections of grains and the dynamics of a collections of molecules. In particular, the ergodic hypothesis is generally invalid for granular materials, so that ordinary statistical physics does not apply. In the absence of a steady energy input, granular materials undergo a rapid collapse which is strongly influenced by the presence of gravity. Fluctuations on laboratory scales in such quantities as the stress can be very large-as much as an order of magnitude greater than the mean.

  5. Organic materials: Fantastic plastic

    NASA Astrophysics Data System (ADS)

    Gaudiana, Russell; Brabec, Christoph

    2008-05-01

    Polymer materials could bring down the cost of electricity production using photovoltaic technology to below $1 per watt for the first time, and enable mass-market, portable applications for photovoltaic technology.

  6. Handling Hazardous Materials.

    ERIC Educational Resources Information Center

    Piper, James; Piverotto, John

    1990-01-01

    Describes a 16-hour course in hazard communication for vocational instructors, which teaches the proper use, storage, and disposal of hazardous materials in the laboratory as well as techniques for teaching safety. (SK)

  7. Ceramic breeder materials

    SciTech Connect

    Johnson, C.E.

    1990-01-01

    The breeding blanket is a key component of the fusion reactor because it directly involves tritium breeding and energy extraction, both of which are critical to development of fusion power. The lithium ceramics continue to show promise as candidate breeder materials. This promise was recognized by the International Thermonuclear Reactor (ITER) design team in its selection of ceramics as the first option for the ITER breeder material. Blanket design studies have indicated properties in the candidate materials data base that need further investigation. Current studies are focusing on tritium release behavior at high burnup, changes in thermophysical properties with burnup, compatibility between the ceramic breeder and beryllium multiplier, and phase changes with burnup. Laboratory and in-reactor tests, some as part of an international collaboration for development of ceramic breeder materials, are underway. 32 refs., 1 fig., 1 tab.

  8. Materials research at CMAM

    NASA Astrophysics Data System (ADS)

    Zucchiatti, Alessandro

    2013-07-01

    The Centro de Micro Analisis de Materiales (CMAM) is a research centre of the Universidad Autónoma de Madrid dedicated to the modification and analysis of materials using ion beam techniques. The infrastructure, based on a HVEE 5MV tandem accelerator, provided with a coaxial Cockcroft Walton charging system, is fully open to research groups of the UAM, to other public research institutions and to private enterprises. The CMAM research covers a few important lines such as advanced materials, surface science, biomedical materials, cultural heritage, materials for energy production. The Centre gives as well support to university teaching and technical training. A detail description of the research infrastructures and their use statistics will be given. Some of the main research results will be presented to show the progress of research in the Centre in the past few years and to motivate the strategic plans for the forthcoming.

  9. Materials research at CMAM

    SciTech Connect

    Zucchiatti, Alessandro

    2013-07-18

    The Centro de Micro Analisis de Materiales (CMAM) is a research centre of the Universidad Autonoma de Madrid dedicated to the modification and analysis of materials using ion beam techniques. The infrastructure, based on a HVEE 5MV tandem accelerator, provided with a coaxial Cockcroft Walton charging system, is fully open to research groups of the UAM, to other public research institutions and to private enterprises. The CMAM research covers a few important lines such as advanced materials, surface science, biomedical materials, cultural heritage, materials for energy production. The Centre gives as well support to university teaching and technical training. A detail description of the research infrastructures and their use statistics will be given. Some of the main research results will be presented to show the progress of research in the Centre in the past few years and to motivate the strategic plans for the forthcoming.

  10. Building Materials Property Table

    SciTech Connect

    2010-04-16

    This information sheet describes a table of some of the key technical properties of many of the most common building materials taken from ASHRAE Fundamentals - 2001, Moisture Control in Buildings, CMHC, NRC/IRC, IEA Annex 24, and manufacturer data.

  11. Quasicrystals: Making invisible materials

    NASA Astrophysics Data System (ADS)

    Boriskina, Svetlana V.

    2015-07-01

    All-dielectric photonic quasicrystals may act as zero-refractive-index homogeneous materials despite their lack of translational symmetry and periodicity, stretching wavelengths to infinity and offering applications in light wavefront sculpting and optical cloaking.

  12. Developments in carbon materials

    NASA Technical Reports Server (NTRS)

    Burchell, Timothy D.

    1994-01-01

    The following carbon-based materials are reviewed and their applications discussed: fullerenes; graphite (synthetic and manufactured); activated carbon fibers; and carbon-carbon composites. Carbon R&D activities at ORNL are emphasized.

  13. Photoconductivity in Dirac materials

    SciTech Connect

    Shao, J. M.; Yang, G. W.

    2015-11-15

    Two-dimensional (2D) Dirac materials including graphene and the surface of a three-dimensional (3D) topological insulator, and 3D Dirac materials including 3D Dirac semimetal and Weyl semimetal have attracted great attention due to their linear Dirac nodes and exotic properties. Here, we use the Fermi’s golden rule and Boltzmann equation within the relaxation time approximation to study and compare the photoconductivity of Dirac materials under different far- or mid-infrared irradiation. Theoretical results show that the photoconductivity exhibits the anisotropic property under the polarized irradiation, but the anisotropic strength is different between 2D and 3D Dirac materials. The photoconductivity depends strongly on the relaxation time for different scattering mechanism, just like the dark conductivity.

  14. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1984-01-01

    Progress is reported in studies of constituent materials composite materials, generic structural elements, processing science technology, and maintaining long-term structural integrity. Topics discussed include: mechanical properties of high performance carbon fibers; fatigue in composite materials; experimental and theoretical studies of moisture and temperature effects on the mechanical properties of graphite-epoxy laminates and neat resins; numerical investigations of the micromechanics of composite fracture; delamination failures of composite laminates; effect of notch size on composite laminates; improved beam theory for anisotropic materials; variation of resin properties through the thickness of cured samples; numerical analysis composite processing; heat treatment of metal matrix composites, and the RP-1 and RP2 gliders of the sailplane project.

  15. Computational Materials Research

    NASA Technical Reports Server (NTRS)

    Veazie, David R.

    1998-01-01

    High temperature thermoplastic polyimide polymers are incorporated in engineering structures in the form of matrix materials in advanced fiber composites and adhesives in bonded joints. Developing analytical tools to predict long term performance and screen for final materials selection for polymers is the impetus for intensive studies at NASA and major industry based airframe developers. These fiber-reinforced polymeric composites (FRPCs) combine high strength with lightweight. In addition, they offer corrosion and fatigue resistance, a reduction in parts count, and new possibilities for control through aeroelastic tailoring and "smart" structures containing fully-integrated sensors and actuators. However, large-scale acceptance and use of polymer composites has historically been extremely slow. Reasons for this include a lack of familiarity of designers with the materials; the need for new tooling and new inspection and repair infrastructures; and high raw materials and fabrication costs.

  16. Reversible hydrogen storage materials

    DOEpatents

    Ritter, James A.; Wang, Tao; Ebner, Armin D.; Holland, Charles E.

    2012-04-10

    In accordance with the present disclosure, a process for synthesis of a complex hydride material for hydrogen storage is provided. The process includes mixing a borohydride with at least one additive agent and at least one catalyst and heating the mixture at a temperature of less than about 600.degree. C. and a pressure of H.sub.2 gas to form a complex hydride material. The complex hydride material comprises MAl.sub.xB.sub.yH.sub.z, wherein M is an alkali metal or group IIA metal, Al is the element aluminum, x is any number from 0 to 1, B is the element boron, y is a number from 0 to 13, and z is a number from 4 to 57 with the additive agent and catalyst still being present. The complex hydride material is capable of cyclic dehydrogenation and rehydrogenation and has a hydrogen capacity of at least about 4 weight percent.

  17. Heavy Vehicle Propulsion Materials

    SciTech Connect

    Ray Johnson

    2000-01-31

    The objectives are to Provide Key Enabling Materials Technologies to Increase Energy Efficiency and Reduce Exhaust Emissions. The following goals are listed: Goal 1: By 3rd quarter 2002, complete development of materials enabling the maintenance or improvement of fuel efficiency {ge} 45% of class 7-8 truck engines while meeting the EPA/Justice Department ''Consent Decree'' for emissions reduction. Goal 2: By 4th quarter 2004, complete development of enabling materials for light-duty (class 1-2) diesel truck engines with efficiency over 40%, over a wide range of loads and speeds, while meeting EPA Tier 2 emission regulations. Goal 3: By 4th quarter 2006, complete development of materials solutions to enable heavy-duty diesel engine efficiency of 50% while meeting the emission reduction goals identified in the EPA proposed rule for heavy-duty highway engines.''

  18. Programs, Materials and Techniques

    ERIC Educational Resources Information Center

    Bannatyne, Alex, Ed.

    1973-01-01

    Favorably reviewed are a prescriptive program model, a handbook containing educational therapy materials, a collection of large type books, and a psychophysical development program to be used with learning disabled children. (MC)

  19. Materials engineering data base

    NASA Technical Reports Server (NTRS)

    1995-01-01

    The various types of materials related data that exist at the NASA Marshall Space Flight Center and compiled into databases which could be accessed by all the NASA centers and by other contractors, are presented.

  20. Lunar material transport vehicle

    NASA Astrophysics Data System (ADS)

    Fisher, Charles D.; Lyons, Douglas; Wilkins, W. Allen, Jr.; Whitehead, Harry C., Jr.

    1988-03-01

    The proposed vehicle, the Lunar Material Transport Vehicle (LMTV), has a mission objective of efficient lunar soil material transport. The LMTV was designed to meet a required set of performance specifications while operating under a given set of constraints. The LMTV is essentially an articulated steering, double-ended dump truck. The vehicle moves on four wheels and has two identical chassis halves. Each half consists of a chassis frame, a material bucket, two wheels with integral curvilinear synchronous motors, a fuel cell and battery arrangement, an electromechanically actuated dumping mechanism, and a powerful microprocessor. The vehicle, as designed, is capable of transporting up to 200 cu ft of material over a one mile round trip per hour. The LMTV is capable of being operated from a variety of sources. The vehicle has been designed as simply as possible with attention also given to secondary usage of components.

  1. Moldable cork ablation material

    NASA Technical Reports Server (NTRS)

    1977-01-01

    A successful thermal ablative material was manufactured. Moldable cork sheets were tested for density, tensile strength, tensile elongation, thermal conductivity, compression set, and specific heat. A moldable cork sheet, therefore, was established as a realistic product.

  2. Mesoporous carbon materials

    DOEpatents

    Dai, Sheng; Wang, Xiqing

    2013-08-20

    The invention is directed to a method for fabricating a mesoporous carbon material, the method comprising subjecting a precursor composition to a curing step followed by a carbonization step, the precursor composition comprising: (i) a templating component comprised of a block copolymer, (ii) a phenolic compound or material, (iii) a crosslinkable aldehyde component, and (iv) at least 0.5 M concentration of a strong acid having a pKa of or less than -2, wherein said carbonization step comprises heating the precursor composition at a carbonizing temperature for sufficient time to convert the precursor composition to a mesoporous carbon material. The invention is also directed to a mesoporous carbon material having an improved thermal stability, preferably produced according to the above method.

  3. EDITORIAL: Electroactive polymer materials

    NASA Astrophysics Data System (ADS)

    Bar-Cohen, Yoseph; Kim, Kwang J.; Ryeol Choi, Hyouk; Madden, John D. W.

    2007-04-01

    Imitating nature's mechanisms offers enormous potential for the improvement of our lives and the tools we use. This field of the study and imitation of, and inspiration from, nature's methods, designs and processes is known as biomimetics. Artificial muscles, i.e. electroactive polymers (EAPs), are one of the emerging technologies enabling biomimetics. Polymers that can be stimulated to change shape or size have been known for many years. The activation mechanisms of such polymers include electrical, chemical, pneumatic, optical and magnetic. Electrical excitation is one of the most attractive stimulators able to produce elastic deformation in polymers. The convenience and practicality of electrical stimulation and the continual improvement in capabilities make EAP materials some of the most attractive among activatable polymers (Bar-Cohen Y (ed) 2004 Electroactive Polymer (EAP) Actuators as Artificial Muscles—Reality, Potential and Challenges 2nd edn, vol PM136 (Bellingham, WA: SPIE Press) pp 1-765). As polymers, EAP materials offer many appealing characteristics that include low weight, fracture tolerance and pliability. Furthermore, they can be configured into almost any conceivable shape and their properties can be tailored to suit a broad range of requirements. These capabilities and the significant change of shape or size under electrical stimulation while being able to endure many cycles of actuation are inspiring many potential possibilities for EAP materials among engineers and scientists in many different disciplines. Practitioners in biomimetics are particularly excited about these materials since they can be used to mimic the movements of animals and insects. Potentially, mechanisms actuated by EAPs will enable engineers to create devices previously imaginable only in science fiction. For many years EAP materials received relatively little attention due to their poor actuation capability and the small number of available materials. In the last fifteen

  4. Electrically conductive material

    DOEpatents

    Singh, Jitendra P.; Bosak, Andrea L.; McPheeters, Charles C.; Dees, Dennis W.

    1993-01-01

    An electrically conductive material for use in solid oxide fuel cells, electrochemical sensors for combustion exhaust, and various other applications possesses increased fracture toughness over available materials, while affording the same electrical conductivity. One embodiment of the sintered electrically conductive material consists essentially of cubic ZrO.sub.2 as a matrix and 6-19 wt. % monoclinic ZrO.sub.2 formed from particles having an average size equal to or greater than about 0.23 microns. Another embodiment of the electrically conductive material consists essentially at cubic ZrO.sub.2 as a matrix and 10-30 wt. % partially stabilized zirconia (PSZ) formed from particles having an average size of approximately 3 microns.

  5. Container for radioactive materials

    DOEpatents

    Fields, Stanley R.

    1985-01-01

    A container for housing a plurality of canister assemblies containing radioactive material and disposed in a longitudinally spaced relation within a carrier to form a payload package concentrically mounted within the container. The payload package includes a spacer for each canister assembly, said spacer comprising a base member longitudinally spacing adjacent canister assemblies from each other and a sleeve surrounding the associated canister assembly for centering the same and conducting heat from the radioactive material in a desired flow path.

  6. Fibre-reinforced materials.

    PubMed

    Brown, D

    2000-11-01

    This paper considers the role of fibres in the reinforcement of composite materials, and the significance of the form the fibre takes and the material from which it is made. The current dental applications of fibre reinforcement, including dental cements and splints, fibres made into structures for use in composites, denture bases and the contemporary use of fibres in fixed partial dentures, are reviewed. Their role in biomedical implants is surveyed and their future forecast. PMID:11218597

  7. Cryogenic turbopump bearing materials

    NASA Technical Reports Server (NTRS)

    Bhat, Biliyar N.

    1989-01-01

    Materials used for modern cryogenic turbopump bearings must withstand extreme conditions of loads and speeds under marginal lubrication. Naturally, these extreme conditions tend to limit the bearing life. It is possible to significantly improve the life of these bearings, however, by improving the fatigue and wear resistance of bearing alloys, and improving the strength, liquid oxygen compatibility and lubricating ability of the bearing cage materials. Improved cooling will also help to keep the bearing temperatures low and hence prolong the bearing life.

  8. Solar concentrator materials development

    NASA Technical Reports Server (NTRS)

    Morel, D. E.; Ayers, S. R.; Gulino, D. A.; Tennyson, R. C.; Egger, R. A.

    1986-01-01

    Materials with potential applications in reflective and refractive solar dynamic concentrators are tested for resistance to atomic oxygen degradation. It is found that inorganic coatings such as MgF2, SiO(x), and ITO provide excellent protection for reflective surfaces while organic materials are much more susceptible to erosion and mass loss. Of the organic polymers tested, the silicones have the highest intrinsic resistance to atomic oxygen degradation.

  9. Noise Abatement Materials

    NASA Technical Reports Server (NTRS)

    1986-01-01

    A former NASA employee who discovered a kind of plastic that soaked up energy, dampened vibrations, and was a good noise abatement material, founded a company to market noise deadening adhesives, sheets, panels and enclosures. Known as SMART products, they are 75-80% lighter than ordinary soundproofing material and have demonstrated a high degree of effectiveness. The company, Varian Associates, makes enclosures for high voltage terminals and other electronic system components, and easily transportable audiometric test booths.

  10. Nonmetallic Materials Handbook

    NASA Technical Reports Server (NTRS)

    1974-01-01

    A handbook compilation of chemical and physical property tests data obtained during qualification and receiving inspection testing of nonmetallic materials for the Viking Lander is introduced. Data cover the following materials: sealants, potting compounds, lubricants, paints and finishes, inks, films, encapsulants, elastomers, structural plastics, ablatives, adhesives, and electrical and thermal insulation. Thermochemical data showing degradation as a function of temperature, from room to 500 C, are included.

  11. Nano-composite materials

    DOEpatents

    Lee, Se-Hee; Tracy, C. Edwin; Pitts, J. Roland

    2010-05-25

    Nano-composite materials are disclosed. An exemplary method of producing a nano-composite material may comprise co-sputtering a transition metal and a refractory metal in a reactive atmosphere. The method may also comprise co-depositing a transition metal and a refractory metal composite structure on a substrate. The method may further comprise thermally annealing the deposited transition metal and refractory metal composite structure in a reactive atmosphere.

  12. Ceramic Laser Materials

    SciTech Connect

    Soules, T F; Clapsaddle, B J; Landingham, R L; Schaffers, K I

    2005-02-15

    Transparent ceramic materials have several major advantages over single crystals in laser applications, not the least of which is the ability to make large aperture parts in a robust manufacturing process. After more than a decade of working on making transparent YAG:Nd, Japanese workers have recently succeeded in demonstrating samples that performed as laser gain media as well as their single crystal counterparts. Since then several laser materials have been made and evaluated. For these reasons, developing ceramic laser materials is the most exciting and futuristic materials topic in today's major solid-state laser conferences. We have established a good working relationship with Konoshima Ltd., the Japanese producer of the best ceramic laser materials, and have procured and evaluated slabs designed by us for use in our high-powered SSHCL. Our measurements indicate that these materials will work in the SSHCL, and we have nearly completed retrofitting the SSHCL with four of the largest transparent ceramic YAG:Nd slabs in existence. We have also begun our own effort to make this material and have produced samples with various degrees of transparency/translucency. We are in the process of carrying out an extensive design-of-experiments to establish the significant process variables for making transparent YAG. Finally because transparent ceramics afford much greater flexibility in the design of lasers, we have been exploring the potential for much larger apertures, new materials, for example for the Mercury laser, other designs for SSHL, such as, edge pumping designs, slabs with built in ASE suppression, etc. This work has just beginning.

  13. Nanostructured materials for photonics

    SciTech Connect

    Kumar, N.D.; Ruland, G.; Yoshida, M.; Lal, M.; Bhawalkar, J.; He, G.S.; Prasad, P.N.

    1996-12-31

    Nanocomposite materials for application in photonics were developed by sol-gel processing and reverse micellar microemulsion techniques. The capability of incorporating many materials with different functional properties in sol-gel processed glass matrices has been explored in making these materials. The large pore volume fraction and the enormous surface area of the sol-gel glasses enables one to introduce many materials in a phase separated fashion, where the phase separation is in the nanometer range. It is possible to introduce an active material on to the pore surface by solution infiltration and subsequent removal of the solvent, then filling the pores with a monomer containing another active material, and polymerizing inside the pores. Using this approach the authors have developed composite materials for optical power limiting applications at different wavelengths and a tunable solid state dye lasing medium. Optically transparent polyimide:TiO{sub 2} composite waveguide materials were prepared by the dispersion of nano-sized TiO{sub 2} particles into a polyimide matrix. The particles were produced through reverse micelles using the sol-gel method, and were incorporated into the fluorinated polyimide solution. A polyimide:TiO{sub 2} (4 wt%) composite waveguide was produced from the solution. Since the particle size is so small, no noticeable scattering loss was observed. The measured optical propagation loss at 633 nm was 1.4 dB/cm, which is equivalent to that of the pure polyimide. The refractive index was increased from 1.550 to 1.560 by the incorporation of TiO{sub 2}.

  14. NMR imaging of materials

    SciTech Connect

    Vinegar, H.J.; Rothwell, W.P.

    1988-03-01

    A method for obtaining at least one petrophysical property of a porous material containing therein at least one preselected fluid, is described, comprising: NMR imaging the material to generate signals dependent upon both M(0) and T/sub 1/ and M(0) and T/sub 2/, generating separate M(0), T/sub 1/ and T/sub 2/ images from the signals, and determining at least one petrophysical property from at least one of the images.

  15. Biomimetic hydrogel materials

    DOEpatents

    Bertozzi, Carolyn; Mukkamala, Ravindranath; Chen, Qing; Hu, Hopin; Baude, Dominique

    2000-01-01

    Novel biomimetic hydrogel materials and methods for their preparation. Hydrogels containing acrylamide-functionalized carbohydrate, sulfoxide, sulfide or sulfone copolymerized with a hydrophilic or hydrophobic copolymerizing material selected from the group consisting of an acrylamide, methacrylamide, acrylate, methacrylate, vinyl and a derivative thereof present in concentration from about 1 to about 99 wt %. and methods for their preparation. The method of use of the new hydrogels for fabrication of soft contact lenses and biomedical implants.

  16. Biomimetic Hydrogel Materials

    DOEpatents

    Bertozzi, Carolyn , Mukkamala, Ravindranath , Chen, Oing , Hu, Hopin , Baude, Dominique

    2003-04-22

    Novel biomimetic hydrogel materials and methods for their preparation. Hydrogels containing acrylamide-functionalized carbohydrate, sulfoxide, sulfide or sulfone copolymerized with a hydrophilic or hydrophobic copolymerizing material selected from the group consisting of an acrylamide, methacrylamide, acrylate, methacrylate, vinyl and a derivative thereof present in concentration from about 1 to about 99 wt %. and methods for their preparation. The method of use of the new hydrogels for fabrication of soft contact lenses and biomedical implants.

  17. Multifunctional nanocomposite materials

    SciTech Connect

    Roy, R.; Komarneni, S.

    1991-11-01

    Objective is to examine the low temperature nanocomposite route in the synthesis of multifunctional materials using two-dimensional clays as hosts. After about 8 months, a significant advance was made in the design and synthesis of novel nanocomposite materials, which are nanometal intercalated clays prepared by a low temperature route. A layered V[sub 2]O[sub 5] gel has been made hydrothermally and its cation exchange properties measured. Several pillared clays have also been synthesized and characterized.

  18. Food Packaging Materials

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The photos show a few of the food products packaged in Alure, a metallized plastic material developed and manufactured by St. Regis Paper Company's Flexible Packaging Division, Dallas, Texas. The material incorporates a metallized film originally developed for space applications. Among the suppliers of the film to St. Regis is King-Seeley Thermos Company, Winchester, Ma'ssachusetts. Initially used by NASA as a signal-bouncing reflective coating for the Echo 1 communications satellite, the film was developed by a company later absorbed by King-Seeley. The metallized film was also used as insulating material for components of a number of other spacecraft. St. Regis developed Alure to meet a multiple packaging material need: good eye appeal, product protection for long periods and the ability to be used successfully on a wide variety of food packaging equipment. When the cost of aluminum foil skyrocketed, packagers sought substitute metallized materials but experiments with a number of them uncovered problems; some were too expensive, some did not adequately protect the product, some were difficult for the machinery to handle. Alure offers a solution. St. Regis created Alure by sandwiching the metallized film between layers of plastics. The resulting laminated metallized material has the superior eye appeal of foil but is less expensive and more easily machined. Alure effectively blocks out light, moisture and oxygen and therefore gives the packaged food long shelf life. A major packaging firm conducted its own tests of the material and confirmed the advantages of machinability and shelf life, adding that it runs faster on machines than materials used in the past and it decreases product waste; the net effect is increased productivity.

  19. LDEF materials data bases

    NASA Technical Reports Server (NTRS)

    Funk, Joan G.; Strickland, John W.; Davis, John M.

    1993-01-01

    The Long Duration Exposure Facility (LDEF) and the accompanying experiments were composed of and contained a wide variety of materials representing the largest collection of materials flown in low Earth orbit (LEO) and retrieved for ground based analysis to date. The results and implications of the mechanical, thermal, optical, and electrical data from these materials are the foundation on which future LEO space missions will be built. The LDEF Materials Special Investigation Group (MSIG) has been charged with establishing and developing data bases to document these materials and their performance to assure not only that the data are archived for future generations but also that the data are available to the spacecraft user community in an easily accessed, user-friendly form. This paper discusses the format and content of the three data bases developed or being developed to accomplish this task. The hardware and software requirements for each of these three data bases are discussed along with current availability of the data bases. This paper also serves as a user's guide to the MAPTIS LDEF Materials Data Base.

  20. Superconducting materials processing

    NASA Technical Reports Server (NTRS)

    Hurley, John S.; Karikari, Emmanuel K.; Hiamang, S. O.; Danjaji, M.; Bassey, Affiong; Morgan, Andre

    1995-01-01

    The effects of materials processing on the properties and behavior of high temperature yttrium barium copper oxide (YBCO) superconductors were investigated. Electrical, magnetic, and structural characteristics of thin films (300 nm) YBA2CU3O(delta) structures grown by pulsed laser deposition on LaAlO3 and SrTiO3 substrates were used to evaluate processing. Pole projection and thin film diffraction measurements were used to establish grain orientation and verify structural integrity of the samples. Susceptibility magnetization, and transport measurements were used to evaluate the magnetic and electrical transport properties of the samples. Our results verified that an unfortunate consequence of processing is inherent changes to the internal structure of the material. This effect translates into modifications in the properties of the materials, and undesired feature that makes it very difficult to consistently predict material behavior. The results show that processing evaluation must incorporate a comprehensive understanding of the properties of the materials. Future studies will emphasize microstructural characteristics of the materials, in particular, those microscopic properties that map macroscopic behavior.

  1. EDITORIAL: Materially speaking!

    NASA Astrophysics Data System (ADS)

    Cornwall, Malcolm G.

    1997-05-01

    We live in a highly materialistic age. This is true not only for our spiritual outlook - or lack of it - but undeniably so for the physical world in which we live. Materials, which are the feature of this special issue, provide literally the fabric on which the modern world is built. Materials science is the systematic study of the physical properties and behaviour of solids with practical applications and importance (if the utility of the material is not explicit or important we are probably in the realm of solid state physics!). Materials in this sense are the stuff of which cars and computers, jet aircraft and washing machines, tower blocks and saucepans, bridges and golf clubs are made. The science of materials therefore encompasses most of the things that form the infrastructure of modern life. But perhaps it is its very ubiquity that removes the mystique, the glamour, the 'zing' from the subject. In contrast, anything cosmological, astronomical or 'fundamental' (as in 'particle'), i.e. of little or no practical significance to our day-to-day lives, excites the curiosity of many able young people. Witness the profusion of books about galaxies and black holes, and quarks and GUTs which strain the popular science shelves of the bookshops. I'm probably being heretical, but perhaps the over-hyping of the very large and the very small has indeed attracted the able few into the serious study of physics, but because of its inherent mathematical complexity and esoteric remoteness maybe it has put off the average youngster who would nevertheless enjoy and succeed in physics-based higher education (and, not incidentally, help fill the seriously depleted lecture theatres in many university physics - and engineering - departments). Materials science on the other hand deals with an intermediate range of things which, give or take an order of magnitude or three, are person-sized as well as person useful. It is - therefore? - undoubtedly one of the less glamorous of the

  2. Modeling Granular Materials

    NASA Astrophysics Data System (ADS)

    Brackbill, J. U.

    2000-11-01

    Granular materials are often cited as examples of systems with complex and unusual properties. Much of this complexity is captured by computational models in which the actual material properties of individual grains are idealized and simplified. Because material properties can be important under extreme conditions, we consider assemblies of grains with more realistic properties. Our model grains may deform, their resulting stresses are computed from elastic / plastic constitutive models, and their interactions with each other include Coulomb friction and bonding. Our model equations are solved using a particle-in-cell (PIC) method, which combines a Lagrangian representation of the materials with an adaptive grid [1]. Our contact model between grains is linear in the number of grains, and we model assemblies with statistically significant numbers of grains. With our model, we have studied the response of dense granular material to shear, with especial attention to the probability density function governing the volume distribution of stress for mono- and poly-disperse samples, circular and polygonal grains, and various values of microscopic friction coefficients, yield stresses, and packing fractions [2]. Remarkably, PDF's are similar in form for all cases simulated, and similar to those observed in experiments with granular materials under both compression and shear. Namely, the simulations yield an exponential probability of large stresses above the mean, and there is a finite chance that a few grains in a large assembly are subjected to extreme stresses at any given time, even at low strain rates. For energetic materials, such as explosives, this is a signficant finding. We have also studied the relationship between distributions of boundary tractions and volume distributions of stress. The ratio of normal and tangential components of traction on the boundary defines a bulk frictional response, which we find increases with the inter-granular friction coefficient

  3. Tribological comparison of materials

    NASA Astrophysics Data System (ADS)

    Shi, Bing

    Approximately 600,000 total joint replacement surgeries are performed each year in the United States. Current artificial joint implants are mainly metal-on-plastic. The synthetic biomaterials undergo degradation through fatigue and corrosive wear from load-bearing and the aqueous ionic environment of the human body. Deposits of inorganic salts can scratch weight-bearing surfaces, making artificial joints stiff and awkward. The excessive wear debris from polyethylene leads to osteolysis and potential loosening of the prosthesis. The lifetime for well-designed artificial joints is at most 10 to 15 years. A patient can usually have two total joint replacements during her/his lifetime. Durability is limited by the body's reaction to wear debris of the artificial joints. Wear of the artificial joints should be reduced. A focus of this thesis is the tribological performance of bearing materials for Total Replacement Artificial Joints (TRAJ). An additional focus is the scaffolds for cell growth from both a tissue engineering and tribological perspective. The tribological properties of materials including Diamond-like Carbon (DLC) coated materials were tested for TRAJ implants. The DLC coatings are chemically inert, impervious to acid and saline media, and are mechanically hard. Carbon-based materials are highly biocompatible. A new alternative to total joints implantation is tissue engineering. Tissue engineering is the replacement of living tissue with tissue that is designed and constructed to meet the needs of the individual patient. Cells were cultured onto the artificial materials, including metals, ceramics, and polymers, and the frictional properties of these materials were investigated to develop a synthetic alternative to orthopedic transplants. Results showed that DLC coated materials had low friction and wear, which are desirable tribological properties for artificial joint material. Cells grew on some of the artificial matrix materials, depending on the

  4. Thermodynamics of Thermoelectric Materials

    NASA Astrophysics Data System (ADS)

    Doak, Jeff W.

    One challenge facing society is the responsible use of our energy resources. Increasing the efficiency of energy generation provides one path to solving this challenge. One commonality among most current energy generation methods is that waste heat is generated during the generation process. Thermoelectrics can provide a solution to increasing the efficiency of power generation and automotive systems by converting waste heat directly to electricity. The current barrier to implementation of thermoelectric systems is the low efficiencies of underlying thermoelectric materials. The efficiency of a thermoelectric material depends on the electronic and thermal transport properties of the material; a good thermoelectric material should be an electronic conductor and a thermal insulator, traits which generally oppose one another. The thermal properties of a thermoelectric material can be improved by forming nanoscale precipitates with the material which scatter phonons, reducing the thermal conductivity. The electronic properties of a thermoelectric material can be improved by doping the material to increase the electronic conductivity or by alloying the material to favorably alter its band structure. The ability of these chemical modifications to affect the thermoelectric efficiency of material are ultimately governed by the chemical thermodynamics of the system. PbTe is a prototypical thermoelectric material: Alloying PbTe with PbS (or other materials) creates nanostructures which scatter phonons and reduce the lattice thermal conductivity. Doping PbTe with Na increases the hole concentration, increasing the electronic conductivity. In this work, we investigate the thermodynamics of PbTe and similar systems using first principles to understand the underlying mechanisms controlling the formation of nanostructures and the amount of doping allowed in these systems. In this work we: 1) investigate the thermodynamics of pseudo-binary alloys of IV--VI systems to identify the

  5. Microwave impregnation of porous materials with thermal energy storage materials

    DOEpatents

    Benson, D.K.; Burrows, R.W.

    1993-04-13

    A method for impregnating a porous, non-metallic construction material with a solid phase-change material is described. The phase-change material in finely divided form is spread onto the surface of the porous material, after which the porous material is exposed to microwave energy for a time sufficient to melt the phase-change material. The melted material is spontaneously absorbed into the pores of the porous material. A sealing chemical may also be included with the phase-change material (or applied subsequent to the phase-change material) to seal the surface of the porous material. Fire retardant chemicals may also be included with the phase-change materials. The treated construction materials are better able to absorb thermal energy and exhibit increased heat storage capacity.

  6. Microwave impregnation of porous materials with thermal energy storage materials

    DOEpatents

    Benson, David K.; Burrows, Richard W.

    1993-01-01

    A method for impregnating a porous, non-metallic construction material with a solid phase-change material is described. The phase-change material in finely divided form is spread onto the surface of the porous material, after which the porous material is exposed to microwave energy for a time sufficient to melt the phase-change material. The melted material is spontaneously absorbed into the pores of the porous material. A sealing chemical may also be included with the phase-change material (or applied subsequent to the phase-change material) to seal the surface of the porous material. Fire retardant chemicals may also be included with the phase-change materials. The treated construction materials are better able to absorb thermal energy and exhibit increased heat storage capacity.

  7. Microwave impregnation of porous materials with thermal energy storage materials

    SciTech Connect

    Benson, D.K.; Burrows, R.W.

    1992-12-31

    A method for impregnating a porous, non-metallic construction material with a solid phase-change material is described. The phase-change material in finely divided form is spread onto the surface of the porous material, after which the porous material is exposed to microwave energy for a time sufficient to melt the phase-change material. The melted material is spontaneously absorbed into the pores of the porous material. A sealing chemical may also be included with the phase-change material (or applied subsequent to the phase-change material) to seal the surface of the porous material. Fire retardant chemicals may also be included with the phase-change materials. The treated construction materials are better able to absorb thermal energy and exhibit increased heat storage capacity.

  8. BUILDING MATERIALS RECLAMATION PROGRAM

    SciTech Connect

    David C. Weggel; Shen-En Chen; Helene Hilger; Fabien Besnard; Tara Cavalline; Brett Tempest; Adam Alvey; Madeleine Grimmer; Rebecca Turner

    2010-08-31

    This report describes work conducted on the Building Materials Reclamation Program for the period of September 2008 to August 2010. The goals of the project included selecting materials from the local construction and demolition (C&D) waste stream and developing economically viable reprocessing, reuse or recycling schemes to divert them from landfill storage. Educational resources as well as conceptual designs and engineering feasibility demonstrations were provided for various aspects of the work. The project was divided into two distinct phases: Research and Engineering Feasibility and Dissemination. In the Research Phase, a literature review was initiated and data collection commenced, an advisory panel was organized, and research was conducted to evaluate high volume C&D materials for nontraditional use; five materials were selected for more detailed investigations. In the Engineering Feasibility and Dissemination Phase, a conceptual study for a regional (Mecklenburg and surrounding counties) collection and sorting facility was performed, an engineering feasibility project to demonstrate the viability of recycling or reuse schemes was created, the literature review was extended and completed, and pedagogical materials were developed. Over the two-year duration of the project, all of the tasks and subtasks outlined in the original project proposal have been completed. The Final Progress Report, which briefly describes actual project accomplishments versus the tasks/subtasks of the original project proposal, is included in Appendix A of this report. This report describes the scientific/technical aspects (hypotheses, research/testing, and findings) of six subprojects that investigated five common C&D materials. Table 1 summarizes the six subprojects, including the C&D material studied and the graduate student and the faculty advisor on each subproject.

  9. ATS materials support

    SciTech Connect

    Karnitz, M.A.; Wright, I.G.; Ferber, M.K.; Holcomb, R.S.; Rawlins, M.H.

    1996-12-31

    The technology based portion of the Advanced Turbine System Program (ATS) contains several subelements which address generic technology issues for land-base gas turbine systems. One subelement is the Materials/Manufacturing Technology Program which is coordinated by DOE-Oak Ridge Operations and Oak Ridge National laboratory (ORNL) for the Department of Energy. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. Projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. The materials manufacturing subelement was developed with input from gas turbine manufacturers, material suppliers, government laboratories and universities. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single-crystal airfoil manufacturing technologies, materials characterization and technology information exchange. Westinghouse Power Generation and Pratt and Whitney each have material programs to develop dependable TBCs that enable increased turbine inlet temperatures while maintaining airfoil substrate temperatures at levels to meet the ATS life goals. Howmet and PCC Airfoils each have projects to extend the capability of single-crystal complex-cored airfoil technology to larger sizes so that higher turbine inlet temperatures can be attained in land-based turbines in a cost-effective manner. Materials characterization tasks are ongoing on TBCs in support of the industrial projects. In addition, a project on long-term testing of ceramics and ceramic-matrix composites for gas turbines is being conducted in support of programs at Solar Turbines, Allison Engines, and Westinghouse Power Generation.

  10. Vulnerability and adaptation to climate change in the Comoe River Basin (West Africa).

    PubMed

    Yéo, Wonnan Eugène; Goula, Bi Tié Albert; Diekkrüger, Bernd; Afouda, Abel

    2016-01-01

    Climate change is impacting water users in many sectors: water supply, farming, industry, hydropower, fishing, housing, navigation and health. Existing situations, like population growth, movement of populations from rural to urban areas, poverty and pollution can aggravate the impacts of climate change. The aim of the study is to evaluate the vulnerability of different water user groups to climate change and define communities' adaptation strategies in the Comoe River Basin. Information was collected on communities' concerns and perception on changes in climate and potential adaptation measures and strategies. Results show that 95 % of the sample in the study communities had heard of it and are aware that climate change is occurring. They have been experiencing changes in economic activity and cropping pattern, reduced water level in rivers, crop failure, delay in cropping season, new pests and diseases, food insecurity, drop in income and decline in crop yield. Results also show that communities employ various adaptation strategies including crops diversification, substitution and calendar redefinition, agroforestry, borrowing from friends and money lenders and increasing fertilizer application. PMID:27386296

  11. [Elastomeric impression materials].

    PubMed

    Levartovsky, S; Folkman, M; Alter, E; Pilo, R

    2011-04-01

    Elastomeric impression materials are in common use. The impression taken should be highly precise, thus, requiring specific care when manipulatingthese materials. There are 4 groups of elastomers; polysulfide, condensation silicone, addition silicone and polyether; each differ in their setting mechanism and their physical and chemical properties. This review elaborates the major properties of elastomers and its implications on their use. The impression material is inserted into the patient's mouth in a viscous state and transforms into viscoelastic state, upon withdrawal, influencing the residual deformation. The requirements are minimal residual deformation or maximal elastic recovery. As the mouth is a wet environment a major consideration is hydrophilicity. The wettability which is estimated by measuring either the contact angle of a droplet of water and the substrate post setting or the contact angle of a droplet of impression material and the wet tooth pre setting, determines the interaction of the material with both mouth fluids and gypsum. As the primary end target is to obtain a model depicting accurately the oral details, an attention to the impressions' compatibility with gypsum should also be given. Many studies were conducted to get a thorough understanding of the hydrophilic properties of each material, and the mechanism utilized, such as surfactants in hydrophilic PVS. Polyether is the only material that is truly hydrophilic; it exhibits the lowest contact angle, during and after setting. Recent studies show that during setting the Polyether hydrophilicity is increased compared to the condition after setting. Dimensional stability, a crucial property of the impression, is affected by the physical and chemical attributes of the material, such as its tear strength. Polysulfide has the highest tear strength. Tear Strength is affected by two major parameters, viscosity, a built-in property, and how fast the impression is pulled out of the mouth, the

  12. A Material Conferring Hemocompatibility

    PubMed Central

    Everett, William; Scurr, David J; Rammou, Anna; Darbyshire, Arnold; Hamilton, George; de Mel, Achala

    2016-01-01

    There is a need for biomimetic materials for use in blood-contacting devices. Blood contacting surfaces maintain their patency through physico-chemical properties of a functional endothelium. A poly(carbonate-urea) urethane (PCU) is used as a base material to examine the feasibility of L-Arginine methyl ester (L-AME) functionalized material for use in implants and coatings. The study hypothesizes that L-AME, incorporated into PCU, functions as a bioactive porogen, releasing upon contact with blood to interact with endothelial nitric oxide synthase (eNOS) present in blood. Endothelial progenitor cells (EPC) were successfully cultured on L-AME functionalized material, indicating that L-AME -increases cell viability. L-AME functionalized material potentially has broad applications in blood-contacting medical devices, as well as various other applications requiring endogenous up-regulation of nitric oxide, such as wound healing. This study presents an in-vitro investigation to demonstrate the novel anti-thrombogenic properties of L-AME, when in solution and when present within a polyurethane-based polymer. PMID:27264087

  13. Silicone breast implant materials.

    PubMed

    Daniels, A U

    2012-01-01

    This opinion article has been written on request because of the recent public controversy over silicone breast implants produced by a now-defunct company, Poly Implant Prosthese (PIP) in France. More than 300,000 PIP devices have been implanted. The purposes of my article are to (1.) provide a general overview of silicone breast implant materials, (2.) to describe the general safety of these materials as reported to date, and (3.) to summarise current publicly available information about these aspects of the PIP prostheses. The materials covered are the silicone rubber from which the implant shells are made and the silicone gel used to fill the shell. The materials safety issues are biocompatibility (especially of the gel) and biodurability of the shell. The literature reviewed indicates that biocompatibility is not an issue with other current generation implants. However, biodurability is. A rough estimate of implant shell rupture rate is ~10+% at 10 years. Information is still emerging about the PIP implants. Initial regulatory disclosures suggest the PIP implants may have both biocompatibility and biodurability problems. They also suggest that PIP implants may have been produced using silicone materials not certified as medical grade. Governmental health and regulatory agencies are just now in the process of deciding what actions should be taken to protect patients. PMID:22826101

  14. Hydrazine Materials Compatibility Database

    NASA Astrophysics Data System (ADS)

    Schmidt, E. W.

    2004-10-01

    Anhydrous hydrazine and its methyl derivatives MMH and UDMH have been safely used as monopropellants and bipropellant fuels in thousands of satellites and space probes, hundreds of expendable launch vehicles and hundreds of piloted reusable launch vehicle flights. The term hydrazine(s) is used here to describe the three propellant hydrazines and their mixtures. Over the years, a significant amount of experience has accumulated in the selection of compatible materials of construction for these and other rocket propellants. Only a few materials incompatibility issues have arisen in the recent past. New materials of construction have become available during the past decades which have not yet been extensively tested for long-term compatibility with hydrazine(s). These new materials promise lightweight (i. e., lighter weight) propulsion system designs and increased payloads in launch vehicles and satellites. Other new materials offer reduced contamination caused by leached ingredients, e. g. less silica leaching from diaphragms in propellant management devices in propellant tanks. This translates into longer mission life.

  15. Sustainable carbon materials.

    PubMed

    Titirici, Maria-Magdalena; White, Robin J; Brun, Nicolas; Budarin, Vitaliy L; Su, Dang Sheng; del Monte, Francisco; Clark, James H; MacLachlan, Mark J

    2015-01-01

    Carbon-based structures are the most versatile materials used in the modern field of renewable energy (i.e., in both generation and storage) and environmental science (e.g., purification/remediation). However, there is a need and indeed a desire to develop increasingly more sustainable variants of classical carbon materials (e.g., activated carbons, carbon nanotubes, carbon aerogels, etc.), particularly when the whole life cycle is considered (i.e., from precursor "cradle" to "green" manufacturing and the product end-of-life "grave"). In this regard, and perhaps mimicking in some respects the natural carbon cycles/production, utilization of natural, abundant and more renewable precursors, coupled with simpler, lower energy synthetic processes which can contribute in part to the reduction in greenhouse gas emissions or the use of toxic elements, can be considered as crucial parameters in the development of sustainable materials manufacturing. Therefore, the synthesis and application of sustainable carbon materials are receiving increasing levels of interest, particularly as application benefits in the context of future energy/chemical industry are becoming recognized. This review will introduce to the reader the most recent and important progress regarding the production of sustainable carbon materials, whilst also highlighting their application in important environmental and energy related fields. PMID:25301517

  16. Material bagging device

    DOEpatents

    Wach, Charles G.; Nelson, Robert E.; Brak, Stephen B.

    1984-01-01

    A bagging device for transferring material from one chamber through an opening in a wall to a second chamber includes a cylindrical housing communicating with the opening and defining a passage between the chambers. A cylindrical cartridge is slidably received within the housing. The cartridge has a substantially rigid cylindrical sleeve to which is affixed a pliable tube. The pliable tube is positioned concentrically about the sleeve and has a pleated portion capable of unfolding from the sleeve and a closed end extending over a terminal end of the sleeve. Sealing means are interposed in sealed relationship between the cartridge and the housing. Material from one chamber is inserted into the cartridge secured in the housing and received in the closed end of the tube which unfolds into the other chamber enclosing the material therein. The tube may then be sealed behind the material and then severed to form a bag-like enclosure defined by the tube's closed terminal end and the new seal. The new seal then forms a terminal end for the unsevered portion of the pliable tube into which additional material may be placed and the bagging process repeated.

  17. Panel 3 - material science

    SciTech Connect

    Sarrao, John L; Yip, Sidney

    2010-01-01

    In the last decades, NNSA's national security challenge has evolved, and the role of simulation and computation has grown dramatically. The process of certifying nuclear weapons performance has changed from one based on integrated tests to science-based certification in which underground nuclear tests have been replaced by large-scale simulations, appropriately validated with fundamental experimental data. Further, the breadth of national security challenges has expanded beyond stewardship of a nuclear deterrent to a broad range of global and asymmetric threats. Materials challenges are central to the full suite of these national security challenges. Mission requirements demand that materials perform predictably in extreme environments -- high pressure, high strain rate, and hostile irradiation and chemical conditions. Considerable advances have been made in incorporating fundamental materials physics into integrated codes used for component certification. On the other hand, significant uncertainties still remain, and materials properties, especially at the mesoscale, are key to understanding uncertainties that remain in integrated weapons performance codes and that at present are treated as empirical knobs. Further, additional national security mission challenges could be addressed more robustly with new and higher performing materials.

  18. A Material Conferring Hemocompatibility.

    PubMed

    Everett, William; Scurr, David J; Rammou, Anna; Darbyshire, Arnold; Hamilton, George; de Mel, Achala

    2016-01-01

    There is a need for biomimetic materials for use in blood-contacting devices. Blood contacting surfaces maintain their patency through physico-chemical properties of a functional endothelium. A poly(carbonate-urea) urethane (PCU) is used as a base material to examine the feasibility of L-Arginine methyl ester (L-AME) functionalized material for use in implants and coatings. The study hypothesizes that L-AME, incorporated into PCU, functions as a bioactive porogen, releasing upon contact with blood to interact with endothelial nitric oxide synthase (eNOS) present in blood. Endothelial progenitor cells (EPC) were successfully cultured on L-AME functionalized material, indicating that L-AME -increases cell viability. L-AME functionalized material potentially has broad applications in blood-contacting medical devices, as well as various other applications requiring endogenous up-regulation of nitric oxide, such as wound healing. This study presents an in-vitro investigation to demonstrate the novel anti-thrombogenic properties of L-AME, when in solution and when present within a polyurethane-based polymer. PMID:27264087

  19. EDITORIAL: Computational materials science Computational materials science

    NASA Astrophysics Data System (ADS)

    Kahl, Gerhard; Kresse, Georg

    2011-10-01

    Special issue in honour of Jürgen Hafner On 30 September 2010, Jürgen Hafner, one of the most prominent and influential members within the solid state community, retired. His remarkably broad scientific oeuvre has made him one of the founding fathers of modern computational materials science: more than 600 scientific publications, numerous contributions to books, and a highly cited monograph, which has become a standard reference in the theory of metals, witness not only the remarkable productivity of Jürgen Hafner but also his impact in theoretical solid state physics. In an effort to duly acknowledge Jürgen Hafner's lasting impact in this field, a Festsymposium was held on 27-29 September 2010 at the Universität Wien. The organizers of this symposium (and authors of this editorial) are proud to say that a large number of highly renowned scientists in theoretical condensed matter theory—co-workers, friends and students—accepted the invitation to this celebration of Hafner's jubilee. Some of these speakers also followed our invitation to submit their contribution to this Festschrift, published in Journal of Physics: Condensed Matter, a journal which Jürgen Hafner served in 2000-2003 and 2003-2006 as a member of the Advisory Editorial Board and member of the Executive Board, respectively. In the subsequent article, Volker Heine, friend and co-worker of Jürgen Hafner over many decades, gives an account of Hafner's impact in the field of theoretical condensed matter physics. Computational materials science contents Theoretical study of structural, mechanical and spectroscopic properties of boehmite (γ-AlOOH) D Tunega, H Pašalić, M H Gerzabek and H Lischka Ethylene epoxidation catalyzed by chlorine-promoted silver oxide M O Ozbek, I Onal and R A Van Santen First-principles study of Cu2ZnSnS4 and the related band offsets for photovoltaic applicationsA Nagoya, R Asahi and G Kresse Renormalization group study of random quantum magnetsIstván A Kovács and

  20. Material isolation enclosure

    DOEpatents

    Martell, Calvin J.; Dahlby, Joel W.; Gallimore, Bradford F.; Comer, Bob E.; Stone, Water A.; Carlson, David O.

    1993-01-01

    An enclosure similar to a glovebox for isolating materials from the atmosphere, yet allowing a technician to manipulate the materials and also apparatus which is located inside the enclosure. A portion of a wall of the enclosure is comprised of at least one flexible curtain. An opening defined by a frame is provided for the technician to insert his hands and forearms into the enclosure. The frame is movable in one plane, so that the technician has access to substantially all of the working interior of the enclosure. As the frame is moved by the technician, while he accomplishes work inside the enclosure, the curtain moves such that the only opening through the enclosure wall is the frame. In a preferred embodiment, where a negative pressure is maintained inside the enclosure, the frame is comprised of airfoils so that turbulence is reduced, thereby enhancing material retention within the box.

  1. Material isolation enclosure

    DOEpatents

    Martell, C.J.; Dahlby, J.W.; Gallimore, B.F.; Comer, B.E.; Stone, W.A.; Carlson, D.O.

    1993-04-27

    An enclosure is described, similar to a glove box, for isolating materials from the atmosphere, yet allowing a technician to manipulate the materials and also apparatus which is located inside the enclosure. A portion of a wall of the enclosure is comprised of at least one flexible curtain. An opening defined by a frame is provided for the technician to insert his hands and forearms into the enclosure. The frame is movable in one plane, so that the technician has access to substantially all of the working interior of the enclosure. As the frame is moved by the technician, while he accomplishes work inside the enclosure, the curtain moves such that the only opening through the enclosure wall is the frame. In a preferred embodiment, where a negative pressure is maintained inside the enclosure, the frame is comprised of airfoils so that turbulence is reduced, thereby enhancing material retention within the box.

  2. Apparatus for dispensing material

    DOEpatents

    Sutter, Peter Werner; Sutter, Eli Anguelova

    2011-07-05

    An apparatus capable of dispensing drops of material with volumes on the order of zeptoliters is described. In some embodiments of the inventive pipette the size of the droplets so dispensed is determined by the size of a hole, or channel, through a carbon shell encapsulating a reservoir that contains material to be dispensed. The channel may be formed by irradiation with an electron beam or other high-energy beam capable of focusing to a spot size less than about 5 nanometers. In some embodiments, the dispensed droplet remains attached to the pipette by a small thread of material, an atomic scale meniscus, forming a virtually free-standing droplet. In some embodiments the droplet may wet the pipette tip and take on attributes of supported drops. Methods for fabricating and using the pipette are also described.

  3. Stirling material technology

    NASA Technical Reports Server (NTRS)

    Titran, R. H.; Stephens, J. R.; Scheuermann, C. M.

    1984-01-01

    The Stirling engine is an external combustion engine that offers the advantage of high fuel economy, low emissions, low noise, and low vibrations compared to current internal combustion automotive engines. The most critical component from a materials viewpoint is the heater head consisting of the cylinders, heating tubes, and regenerator housing. Materials requirements for the heater head include compatibility with hydrogen, resistance to hydrogen permeation, high temperature oxidation/corrosion resistance, and high temperature creep-rupture and fatigue properties. A materials research and technology program identified the wrought alloys CG-27 and 12RN72 and the cast alloys XF-818, NASAUT 4G-A1, and NASACC-1 as candidate replacements for the cobalt containing alloys used in current prototype engines. It is concluded that manufacture of the engine is feasible from low cost iron-base alloys rather than the cobalt alloys used in prototype engines. Results of research that lead to this conclusion are presented.

  4. [Materials for mouth protectors].

    PubMed

    Kloeg, E F; Collys, K

    2003-01-01

    Taking into account the number of teeth which are yearly irreversible traumatised during sport activities, the general use of mouthguards would contribute positively to the prevention of dental injuries. Custom-made mouthguards are more comfortable to wear and offer better retention and protection than stock and mouth-formed mouthguards. Different kinds of materials are available on the market for the construction of mouthguards. A polyethylene-polyvinylacetate copolymer (EVA) is the most suitable material. EVA allows the inclusion of hard or soft layers within the mouthguard. The thickness of a mouthguard is important for the reduction of applied forces to teeth: energy absorption capacity increases with material thickness. Increased thickness however, is associated with a reduction of comfort. Therefore, it is important that dentists take the patients' wishes and demands on both comfort and protection into consideration. A description of the clinical and technical method for the construction of a custom made mouthguard is given. PMID:12894661

  5. Bioinspired Functional Materials

    SciTech Connect

    Zheng, Yongmei; Wang, Jingxia; Hou, Yongping; Bai, Hao; Hu, Michael Z.

    2014-11-25

    This special issue is focused on the nanoscale or micro-/nanoscale structures similar to the biological features in multilevels or hierarchy and so on. Research by mimicking biological systems has shown more impact on many applications due to the well-designed micro-/nanostructures inspired from the biological surfaces or interfaces; therefore, the materials may achieve the fascinating functionality. In conclusion, the bioinspired functional materials may be fabricated by developing novel technology or methods such as synthesis, self-assembly, and soft lithography at micro- or nanolevel or multilevels and, in addition, the multidisciplinary procedures of physical or chemical methods and nanotechnology to mimic the biological multiscale micro-/nanostructures onto one-/two-dimensional surface materials.

  6. Fire Resistant Materials

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Fire hazard is greater in atmospheres containing a high percentage of oxygen under pressure. NASA intensified its fire safety research after a 1967 Apollo fire. A chemically treated fabric called Durette developed by Monsanto Company, which will not burn or produce noxious fumes, was selected as a material for Apollo astronaut garments. Monsanto sold production rights for this material to Fire Safe Products (FSP). Durette is now used for a wide range of applications such as: sheets, attendants' uniforms in hyperbaric chambers; crew's clothing, furniture and interior walls of diving chambers operated by the U.S. Navy and other oceanographic companies and research organizations. Pyrotect Safety Equipment, Minneapolis, MN produces Durette suits for auto racers, refuelers and crew chiefs from material supplied by FSP. FSP also manufactures Durette bags for filtering gases and dust from boilers, electric generators and similar systems. Durette bags are an alternative to other felted fiber capable of operating at high temperature that cost twice as much.

  7. Pattern Formation in Materials

    NASA Astrophysics Data System (ADS)

    Karma, Alain

    2011-04-01

    Pattern formation is ubiquitous in nature, from sand ripples formed by wind to the development of a complex biological organism with different organs and a central nervous system. In the realm of materials, patterns are formed invariably when matter is transformed between different solid, liquid or gaseous states far from thermodynamic equilibrium. Material failure is itself mediated by the propagation of cracks that form intricate patterns. Understanding how patterns form and evolve is key to design materials with desired properties and to optimize their performance and safety. This talk will discuss recent progress made to understand three distinct class of patterns including the highly branched snow-flake-like dendritic patterns formed during the solidification process, polycrystalline patterns shaped by grain boundaries, and crack patterns.

  8. Hazardous materials dictionary

    SciTech Connect

    Coleman, R.J.

    1987-01-01

    Parallel growth of the chemical industry of emergency response capabilities in the public and private sectors has created a new need for improved communications. A new vocabulary of important terms is emerging in each of the industries that transport, store and handle hazardous materials. This dictionary, representing a compilation of words and phrases from many relevant sources, will help document and standardize the nomenclature of hazardous materials. The authors have screened the technical discourse of the chemical, transportation, petroleum and medical fields, both governmental and private, to determine the most current expressions and their uses. The lexicographic goal has been to identify key terms, ambiguous and multiple meaning words, acronyms, symbols and even slang referring to hazardous materials reactions, storing and handling procedures.

  9. Materials and structures technology

    NASA Technical Reports Server (NTRS)

    Signorelli, R. A.; Glasgow, T. K.; Halford, G. R.; Levine, S. R.

    1979-01-01

    Materials and structures performance limitations, particularly for the hot section of the engine in which these limitations limit the life of components, are considered. Failure modes for components such as blades, vanes, and combustors and how they are affected by the environment for such components are discussed. Methods used to improve the materials used for such components are: (1) application of directional structures to turbine components for high strength at high temperatures; (2) improved coatings to increase oxidation and corrosion resistance; (3) increase strength and stiffness with reduced weight by applying higher specific properties of composite materials; and (4) cost effective processing such as near net shape powder methods applied to disks. Life prediction techniques developed to predict component life accurately in advance of service and progress in improving the intermediate and cold section components of turbine engines are covered.

  10. Bioinspired Functional Materials

    DOE PAGESBeta

    Zheng, Yongmei; Wang, Jingxia; Hou, Yongping; Bai, Hao; Hu, Michael Z.

    2014-11-25

    This special issue is focused on the nanoscale or micro-/nanoscale structures similar to the biological features in multilevels or hierarchy and so on. Research by mimicking biological systems has shown more impact on many applications due to the well-designed micro-/nanostructures inspired from the biological surfaces or interfaces; therefore, the materials may achieve the fascinating functionality. In conclusion, the bioinspired functional materials may be fabricated by developing novel technology or methods such as synthesis, self-assembly, and soft lithography at micro- or nanolevel or multilevels and, in addition, the multidisciplinary procedures of physical or chemical methods and nanotechnology to mimic the biologicalmore » multiscale micro-/nanostructures onto one-/two-dimensional surface materials.« less

  11. Oxygen ion conducting materials

    DOEpatents

    Vaughey, John; Krumpelt, Michael; Wang, Xiaoping; Carter, J. David

    2005-07-12

    An oxygen ion conducting ceramic oxide that has applications in industry including fuel cells, oxygen pumps, oxygen sensors, and separation membranes. The material is based on the idea that substituting a dopant into the host perovskite lattice of (La,Sr)MnO.sub.3 that prefers a coordination number lower than 6 will induce oxygen ion vacancies to form in the lattice. Because the oxygen ion conductivity of (La,Sr)MnO.sub.3 is low over a very large temperature range, the material exhibits a high overpotential when used. The inclusion of oxygen vacancies into the lattice by doping the material has been found to maintain the desirable properties of (La,Sr)MnO.sub.3, while significantly decreasing the experimentally observed overpotential.

  12. Oxygen ion conducting materials

    DOEpatents

    Carter, J. David; Wang, Xiaoping; Vaughey, John; Krumpelt, Michael

    2004-11-23

    An oxygen ion conducting ceramic oxide that has applications in industry including fuel cells, oxygen pumps, oxygen sensors, and separation membranes. The material is based on the idea that substituting a dopant into the host perovskite lattice of (La,Sr)MnO.sub.3 that prefers a coordination number lower than 6 will induce oxygen ion vacancies to form in the lattice. Because the oxygen ion conductivity of (La,Sr)MnO.sub.3 is low over a very large temperature range, the material exhibits a high overpotential when used. The inclusion of oxygen vacancies into the lattice by doping the material has been found to maintain the desirable properties of (La,Sr)MnO.sub.3, while significantly decreasing the experimentally observed overpotential.

  13. Oxygen ion conducting materials

    DOEpatents

    Vaughey, John; Krumpelt, Michael; Wang, Xiaoping; Carter, J. David

    2003-01-01

    An oxygen ion conducting ceramic oxide that has applications in industry including fuel cells, oxygen pumps, oxygen sensors, and separation membranes. The material is based on the idea that substituting a dopant into the host perovskite lattice of (La,Sr)MnO.sub.3 that prefers a coordination number lower than 6 will induce oxygen ion vacancies to form in the lattice. Because the oxygen ion conductivity of (La,Sr)MnO.sub.3 is low over a very large temperature range, the material exhibits a high overpotential when used. The inclusion of oxygen vacancies into the lattice by doping the material has been found to maintain the desirable properties of (La,Sr)MnO.sub.3, while significantly decreasing the experimentally observed overpotential.

  14. Materials for aerospace

    SciTech Connect

    Steinberg, M.A.

    1986-10-01

    Early last year the US Office of Science and Technology put forward an agenda for American aerospace activity in the coming decades. The plan established goals for subsonic, supersonic and transatmospheric hypersonic flight. Those goals, together with Reagan Administration's programs for a space station and the Strategic Defense Initiative, serve as a driving force for extensive improvements in the materials that enable airplanes and spacecraft to function efficiently. The development of materials, together with advances in the technology of fabricating parts, will play a key role in aerospace systems of the future. Among the materials developments projected for the year 2000 are new composites and alloys for structural members; superalloys, ceramics and glass composites for propulsion systems, and carbon-carbon composites (carbon fibers in a carbon matrix) for high-temperature applications in places where resistance to heat and ablation is critical. 5 figures.

  15. Materials property measurements

    SciTech Connect

    Boyd, D.M.; Green, E.R.; Doctor, S.R.; Good, M.S.

    1990-04-19

    An in-depth review of the measurement techniques that could be used in materials characterization is presented. The measurement techniques to non-destructively determine the in-service or time-related aging of materials considered include ultrasonic velocity and attenuation, eddy current conductivity, neutron scattering and absorption, conventional and tomographic imaging for ultrasonic and radiation imaging, x-ray scattering, thermal impedance, and magnetic hysteresis. The three sections of the report include a review of failure mechanisms in steel and a discussion of nondestructive evaluation techniques and fracture mechanics, a description of a chart on Measurement Techniques versus Material Properties, and recommendations on the techniques and tests to be performed for the experimental investigations and analysis task of the project. 49 refs., 7 figs.

  16. Active Biological Materials

    PubMed Central

    Fletcher, Daniel A.; Geissler, Phillip L.

    2011-01-01

    Cells make use of dynamic internal structures to control shape and create movement. By consuming energy to assemble into highly organized systems of interacting parts, these structures can generate force and resist compression, as well as adaptively change in response to their environment. Recent progress in reconstituting cytoskeletal structures in vitro has provided an opportunity to characterize the mechanics and dynamics of filament networks formed from purified proteins. Results indicate that a complex interplay between length scales and timescales underlies the mechanical responses of these systems and that energy consumption, as manifested in molecular motor activity and cytoskeletal filament growth, can drive transitions between distinct material states. This review discusses the basic characteristics of these active biological materials that set them apart from conventional materials and that create a rich array of unique behaviors. PMID:18999991

  17. Optimized nanoporous materials.

    SciTech Connect

    Braun, Paul V.; Langham, Mary Elizabeth; Jacobs, Benjamin W.; Ong, Markus D.; Narayan, Roger J.; Pierson, Bonnie E.; Gittard, Shaun D.; Robinson, David B.; Ham, Sung-Kyoung; Chae, Weon-Sik; Gough, Dara V.; Wu, Chung-An Max; Ha, Cindy M.; Tran, Kim L.

    2009-09-01

    Nanoporous materials have maximum practical surface areas for electrical charge storage; every point in an electrode is within a few atoms of an interface at which charge can be stored. Metal-electrolyte interfaces make best use of surface area in porous materials. However, ion transport through long, narrow pores is slow. We seek to understand and optimize the tradeoff between capacity and transport. Modeling and measurements of nanoporous gold electrodes has allowed us to determine design principles, including the fact that these materials can deplete salt from the electrolyte, increasing resistance. We have developed fabrication techniques to demonstrate architectures inspired by these principles that may overcome identified obstacles. A key concept is that electrodes should be as close together as possible; this is likely to involve an interpenetrating pore structure. However, this may prove extremely challenging to fabricate at the finest scales; a hierarchically porous structure can be a worthy compromise.

  18. Primordial material in meteorites

    NASA Technical Reports Server (NTRS)

    Kerridge, J. F.

    1986-01-01

    Primordial is a term which applied to material that entered the solar system early and became incorporated into a meteorite without totally losing its identity. Identification of such material surviving in meteorites is so far solely through recognition of anomalous isotopic compositions of generally macroscopic entities contained within those meteorites. Isotopic anomalies are, by definition, isotopic compositions which differ from the canonical solar system abundances in ways which cannot be explained in terms of local processes such as mass dependent fractionation, cosmic ray induced spallation or decay of radionuclides. A comprehensive account of isotopic anomalies is impractical here, so it is necessary to be selective. Issues which are potentially addressable through the study of such primordial material are examined. Those issues will be illustrated with specific, but not exhaustive, examples.

  19. Strong, Lightweight, Porous Materials

    NASA Technical Reports Server (NTRS)

    Leventis, Nicholas; Meador, Mary Ann B.; Johnston, James C.; Fabrizio, Eve F.; Ilhan, Ulvi

    2007-01-01

    A new class of strong, lightweight, porous materials has been invented as an outgrowth of an effort to develop reinforced silica aerogels. The new material, called X-Aerogel is less hygroscopic, but no less porous and of similar density to the corresponding unmodified aerogels. However, the property that sets X-Aerogels apart is their mechanical strength, which can be as much as two and a half orders of magnitude stronger that the unmodified aerogels. X-Aerogels are envisioned to be useful for making extremely lightweight, thermally insulating, structural components, but they may also have applications as electrical insulators, components of laminates, catalyst supports, templates for electrode materials, fuel-cell components, and filter membranes.

  20. Modified Composite Materials Workshop

    NASA Technical Reports Server (NTRS)

    Dicus, D. L. (Compiler)

    1978-01-01

    The reduction or elimination of the hazard which results from accidental release of graphite fibers from composite materials was studied at a workshop. At the workshop, groups were organized to consider six topics: epoxy modifications, epoxy replacement, fiber modifications, fiber coatings and new fibers, hybrids, and fiber release testing. Because of the time required to develop a new material and acquire a design data base, most of the workers concluded that a modified composite material would require about four to five years of development and testing before it could be applied to aircraft structures. The hybrid working group considered that some hybrid composites which reduce the risk of accidental fiber release might be put into service over the near term. The fiber release testing working group recommended a coordinated effort to define a suitable laboratory test.

  1. Material Testing Device

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Small Business Innovation Research (SBIR) contracts led to two commercial instruments and a new subsidiary for Physical Sciences, Inc. (PSI). The FAST system, originally developed for testing the effect of space environment on materials, is now sold commercially for use in aging certification of materials intended for orbital operation. The Optical Temperature Monitor was designed for precise measurement of high temperatures on certain materials to be manufactured in space. The original research was extended to the development of a commercial instrument that measures and controls fuel gas temperatures in industrial boilers. PSI created PSI Environmental Instruments to market the system. The company also offers an Aerospace Measurement Service that has evolved from other SBIR contracts.

  2. Porous material neutron detector

    DOEpatents

    Diawara, Yacouba; Kocsis, Menyhert

    2012-04-10

    A neutron detector employs a porous material layer including pores between nanoparticles. The composition of the nanoparticles is selected to cause emission of electrons upon detection of a neutron. The nanoparticles have a maximum dimension that is in the range from 0.1 micron to 1 millimeter, and can be sintered with pores thereamongst. A passing radiation generates electrons at one or more nanoparticles, some of which are scattered into a pore and directed toward a direction opposite to the applied electrical field. These electrons travel through the pore and collide with additional nanoparticles, which generate more electrons. The electrons are amplified in a cascade reaction that occurs along the pores behind the initial detection point. An electron amplification device may be placed behind the porous material layer to further amplify the electrons exiting the porous material layer.

  3. MATERIAL CONTROL ACCOUNTING INMM

    SciTech Connect

    Hasty, T.

    2009-06-14

    Since 1996, the Mining and Chemical Combine (MCC - formerly known as K-26), and the United States Department of Energy (DOE) have been cooperating under the cooperative Nuclear Material Protection, Control and Accounting (MPC&A) Program between the Russian Federation and the U.S. Governments. Since MCC continues to operate a reactor for steam and electricity production for the site and city of Zheleznogorsk which results in production of the weapons grade plutonium, one of the goals of the MPC&A program is to support implementation of an expanded comprehensive nuclear material control and accounting (MC&A) program. To date MCC has completed upgrades identified in the initial gap analysis and documented in the site MC&A Plan and is implementing additional upgrades identified during an update to the gap analysis. The scope of these upgrades includes implementation of MCC organization structure relating to MC&A, establishing material balance area structure for special nuclear materials (SNM) storage and bulk processing areas, and material control functions including SNM portal monitors at target locations. Material accounting function upgrades include enhancements in the conduct of physical inventories, limit of error inventory difference procedure enhancements, implementation of basic computerized accounting system for four SNM storage areas, implementation of measurement equipment for improved accountability reporting, and both new and revised site-level MC&A procedures. This paper will discuss the implementation of MC&A upgrades at MCC based on the requirements established in the comprehensive MC&A plan developed by the Mining and Chemical Combine as part of the MPC&A Program.

  4. Correlation monitor materials

    SciTech Connect

    Corwin, W.R.

    1995-10-01

    This task has been established with the explicit purpose of ensuring the continued availability of the pedigreed and extremely well-characterized material now required for inclusion in all additional and future surveillance capsules in commercial light-water reactors. During this reporting period, concrete was poured and pallets storage racks were installed to provide adequate room for the storage of the correlation monitor material being transferred from its location at the Y-12 Plant to its archival storage location at ORNL. The racks came from surplus material storage at ORNL and hence were obtained at no cost to the HSSI Program. Inquiries into cost-effective means of sheltering the blocks of correlation monitor materials from further weather-related deteriorization were initiated. The most likely approach would be to procure a turn-key sheet metal building installed over the storage racks by an outside contractor to minimize costs. Most of the material has now been transferred from Y-12 to the ORNL storage area. It has been repositioned on new storage pallets and placed into the storage racks, An update of the detailed material inventory was initiated to ascertain the revised location of all blocks. Pieces of HSST plate O3 were distributed to participants in the ASTM cross-comparison exercise on subsize specimen testing technology. The use of the HSST O3 will provide for data from the many varieties of tests to be performed to be compared with the standardized data previously developed. The testing techniques will focus on ways to measure transition temperature and fracture toughness.

  5. Thermoelectric materials development

    NASA Technical Reports Server (NTRS)

    Fleurial, J. P.; Caillat, T.; Borshchevsky, A.

    1998-01-01

    A systematic search for advanced thermoelectric materials was initiated at JPL several years ago to evaluate candidate materials which includes consideration of the following property attributes: (1) semiconducting properties; (2) large Seebeck coefficient; (3) high carrier mobility and high electrical conductivity; (4) low lattice thermal conductivity; and (5) chemical stability and low vapor pressure. Through this candidate screening process, JPL identified several families of materials as promising candidates for improved thermoelectric materials including the skutterudite family. As part of an ongoing effort to develop skutterudite materials with lower thermal conductivity values, several solid solutions and filled skutterudite materials were investigated under the effort sponsored by DOE. The efforts have primarily focused on: (1) study of existence and properties of solid solutions between the binary compounds CoSb3 and IrSb3, and RuSb2Te, and (2) CeFe(4-x)Sb12 based filled compositions. For the solid solutions, the lattice thermal conductivity reduction was expected to be reduced by the introduction of the Te and Ru atoms while in the case of CeFe(4-x)Ru(x)Sb12 based filled compositions. For the solid solutions, the lattice thermal conductivity reduction was expected to be reduced by the introduction of the Te and Ru atoms while in the case of CeFe(4-x)Ru(x)Sb12 filled compositions, the reduction would be caused by the rattling of Ce atoms located in the empty voids of the skutterudite structure and the substitution of Fe for Ru. The details of the sample preparation and characterization of their thermoelectric properties are reported in this report.

  6. Organic nonlinear optical materials

    NASA Technical Reports Server (NTRS)

    Umegaki, S.

    1987-01-01

    Recently, it became clear that organic compounds with delocalized pi electrons show a great nonlinear optical response. Especially, secondary nonlinear optical constants of more than 2 digits were often seen in the molecular level compared to the existing inorganic crystals such as LiNbO3. The crystallization was continuously tried. Organic nonlinear optical crystals have a new future as materials for use in the applied physics such as photomodulation, optical frequency transformation, opto-bistabilization, and phase conjugation optics. Organic nonlinear optical materials, e.g., urea, O2NC6H4NH2, I, II, are reviewed with 50 references.

  7. Container for radioactive materials

    DOEpatents

    Fields, S.R.

    1984-05-30

    A container is claimed for housing a plurality of canister assemblies containing radioactive material. The several canister assemblies are stacked in a longitudinally spaced relation within a carrier to form a payload concentrically mounted within the container. The payload package includes a spacer for each canister assembly, said spacer comprising a base member longitudinally spacing adjacent canister assemblies from each other and sleeve surrounding the associated canister assembly for centering the same and conducting heat from the radioactive material in a desired flow path. 7 figures.

  8. Fabrication of cellular materials

    NASA Astrophysics Data System (ADS)

    Prud'homme, Robert K.; Aksay, Ilhan A.; Garg, Rajeev

    1996-02-01

    Nature uses cellular materials in applications requiring strength while, simultaneously, minimizing raw materials requirements. Minimizing raw materials is efficient both in terms of the energy expended by the organism to synthesize the structure and in terms of the strength- to-weight ratio of the structure. Wood is the most obvious example of cellular bio-materials, and it is the focus of other presentations in this symposium. The lightweight bone structure of birds is another excellent example where weight is a key criterion. The anchoring foot of the common muscle [Mytilus edulis] whereby it attaches itself to objects is a further example of a biological system that uses a foam to fill space and yet conserve on raw materials. In the case of the muscle the foam is water filled and the foot structure distributes stress over a larger area so that the strength of the byssal thread from which it is suspended is matched to the strength of interfacial attachment of the foot to a substrate. In these examples the synthesis and fabrication of the cellular material is directed by intercellular, genetically coded, biochemical reactions. The resulting cell sizes are microns in scale. Cellular materials at the next larger scale are created by organisms at the next higher level of integration. For example an African tree frog lays her eggs in a gas/fluid foam sack she builds on a branch overhanging a pond. The outside of the foam sack hardens in the sun and prevents water evaporation. The foam structure minimizes the amount of fluid that needs to be incorporated into the sack and minimizes its weight. However, as far as the developing eggs are concerned, they are in an aqueous medium, i.e. the continuous fluid phase of the foam. After precisely six days the eggs hatch, and the solidified outer wall re-liquefies and dumps the emerging tadpoles into the pond below. The bee honeycomb is an example of a cellular material with exquisite periodicity at millimeter length scales. The

  9. LDEF Materials/Contamination

    NASA Technical Reports Server (NTRS)

    Pippin, Gary

    1997-01-01

    This pictorial presentation reviews the post-flight analysis results from two type of hardware (tray clamp bolt heads and uhcre flight experiment tray walls) from the Long Duration Exposure Facility (LDEF). It will also discuss flight hardware for one upcoming (Effects of the Space Environment on Materials (ESEM) flight experiment), and two current flight experiments evaluating the performance of materials in space (Passive Optical Sample Assembly (POSA) 1&2 flight experiments. These flight experiments also are concerned with contamination effects which will also be discussed.

  10. Thermal energy storage material

    DOEpatents

    Leifer, Leslie

    1976-01-01

    A thermal energy storage material which is stable at atmospheric temperature and pressure and has a melting point higher than 32.degree.F. is prepared by dissolving a specific class of clathrate forming compounds, such as tetra n-propyl or tetra n-butyl ammonium fluoride, in water to form a substantially solid clathrate. The resultant thermal energy storage material is capable of absorbing heat from or releasing heat to a given region as it transforms between solid and liquid states in response to temperature changes in the region above and below its melting point.

  11. Corrosion of Ceramic Materials

    NASA Technical Reports Server (NTRS)

    Opila, Elizabeth J.; Jacobson, Nathan S.

    1999-01-01

    Non-oxide ceramics are promising materials for a range of high temperature applications. Selected current and future applications are listed. In all such applications, the ceramics are exposed to high temperature gases. Therefore it is critical to understand the response of these materials to their environment. The variables to be considered here include both the type of ceramic and the environment to which it is exposed. Non-oxide ceramics include borides, nitrides, and carbides. Most high temperature corrosion environments contain oxygen and hence the emphasis of this chapter will be on oxidation processes.

  12. Electron Beam Materials Irradiators

    NASA Astrophysics Data System (ADS)

    Cleland, Marshall R.

    2012-06-01

    Radiation processing is a well established method for enhancing the properties of materials and commercial products by treating them with ionizing energy in the form of high-energy electrons, X-rays, and gamma rays. Beneficial effects include polymerizing, cross-linking, grafting and degrading plastics, sterilizing single-use medical devices, disinfecting and disinfesting fresh foods, purifying drinking water, treating wastewater and other toxic waste materials that harm the environment, and many other applications that are still being evaluated. Industrial electron accelerators of several types have been developed and are being used for these applications. More than 1800 electron accelerators are presently installed in facilities worldwide for these purposes.

  13. Hazardous-Materials Robot

    NASA Technical Reports Server (NTRS)

    Stone, Henry W.; Edmonds, Gary O.

    1995-01-01

    Remotely controlled mobile robot used to locate, characterize, identify, and eventually mitigate incidents involving hazardous-materials spills/releases. Possesses number of innovative features, allowing it to perform mission-critical functions such as opening and unlocking doors and sensing for hazardous materials. Provides safe means for locating and identifying spills and eliminates risks of injury associated with use of manned entry teams. Current version of vehicle, called HAZBOT III, also features unique mechanical and electrical design enabling vehicle to operate safely within combustible atmosphere.

  14. Skylab parasol material evaluation

    NASA Technical Reports Server (NTRS)

    Jacobs, S.

    1975-01-01

    Results of experimental work to evaluate the degradation rate of a parasol that was used as a means of alleviating thermal problems encountered soon after the launch of the Skylab 1 space vehicle are presented. Material selection criteria are discussed; the material chosen is described, and results of tests performed after environmental exposure at five facilities are given. The facilities used for exposure to ultraviolet radiation/thermal-vacuum environments and the equipment used for testing physical properties before and after exposure are described. Comparisons of ground test and flight test data are included.

  15. Sandia Material Model Driver

    Energy Science and Technology Software Center (ESTSC)

    2005-09-28

    The Sandia Material Model Driver (MMD) software package allows users to run material models from a variety of different Finite Element Model (FEM) codes in a standalone fashion, independent of the host codes. The MMD software is designed to be run on a variety of different operating system platforms as a console application. Initial development efforts have resulted in a package that has been shown to be fast, convenient, and easy to use, with substantialmore » growth potential.« less

  16. Ultrasonic Processing of Materials

    SciTech Connect

    Meek, Thomas T.; Han, Qingyou; Jian, Xiaogang; Xu, Hanbing

    2005-06-30

    The purpose of this project was to determine the impact of a new breakthrough technology, ultrasonic processing, on various industries, including steel, aluminum, metal casting, and forging. The specific goals of the project were to evaluate core principles and establish quantitative bases for the ultrasonc processing of materials, and to demonstrate key applications in the areas of grain refinement of alloys during solidification and degassing of alloy melts. This study focussed on two classes of materials - aluminum alloys and steels - and demonstrated the application of ultrasonic processing during ingot casting.

  17. Losses in Ferroelectric Materials

    PubMed Central

    Liu, Gang; Zhang, Shujun; Jiang, Wenhua; Cao, Wenwu

    2015-01-01

    Ferroelectric materials are the best dielectric and piezoelectric materials known today. Since the discovery of barium titanate in the 1940s, lead zirconate titanate ceramics in the 1950s and relaxor-PT single crystals (such as lead magnesium niobate-lead titanate and lead zinc niobate-lead titanate) in the 1980s and 1990s, perovskite ferroelectric materials have been the dominating piezoelectric materials for electromechanical devices, and are widely used in sensors, actuators and ultrasonic transducers. Energy losses (or energy dissipation) in ferroelectrics are one of the most critical issues for high power devices, such as therapeutic ultrasonic transducers, large displacement actuators, SONAR projectors, and high frequency medical imaging transducers. The losses of ferroelectric materials have three distinct types, i.e., elastic, piezoelectric and dielectric losses. People have been investigating the mechanisms of these losses and are trying hard to control and minimize them so as to reduce performance degradation in electromechanical devices. There are impressive progresses made in the past several decades on this topic, but some confusions still exist. Therefore, a systematic review to define related concepts and clear up confusions is urgently in need. With this objective in mind, we provide here a comprehensive review on the energy losses in ferroelectrics, including related mechanisms, characterization techniques and collections of published data on many ferroelectric materials to provide a useful resource for interested scientists and engineers to design electromechanical devices and to gain a global perspective on the complex physical phenomena involved. More importantly, based on the analysis of available information, we proposed a general theoretical model to describe the inherent relationships among elastic, dielectric, piezoelectric and mechanical losses. For multi-domain ferroelectric single crystals and ceramics, intrinsic and extrinsic energy

  18. Thermal insulating material

    SciTech Connect

    Billings, P.J.

    1981-12-08

    A thermal insulating material which includes silicone coated perlite providing thermal insulation, powdered perlite to fill in the gaps between the silicone coated perlite particle, and a specially formulated binder for the perlite is disclosed. The binder has a powder portion comprising a mixture of gypsum and cement for strength and a liquid portion comprising polyvinyl acetate, a colloid and water. After these materials are mixed in proper proportions, water is added to provide the fluidity necessary for application, such as by spraying or molding into prefabricated panels.

  19. Materials separation by dielectrophoresis

    NASA Technical Reports Server (NTRS)

    Sagar, A. D.; Rose, R. M.

    1988-01-01

    The feasibility of vacuum dielectrophoresis as a method for particulate materials separation in a microgravity environment was investigated. Particle separations were performed in a specially constructed miniature drop-tower with a residence time of about 0.3 sec. Particle motion in such a system is independent of size and based only on density and dielectric constant, for a given electric field. The observed separations and deflections exceeded the theoretical predictions, probably due to multiparticle effects. In any case, this approach should work well in microgravity for many classes of materials, with relatively simple apparatus and low weight and power requirements.

  20. Materials for geothermal production

    SciTech Connect

    Kukacka, L.E.

    1992-01-01

    Advances in the development of new materials continue to be made in the geothermal materials project. Many successes have already been accrued and the results used commercially. In FY 1991, work was focused on reducing well drilling, fluid transport and energy conversion costs. Specific activities performed included lightweight CO{sub 2}-resistant well cements, thermally conductive and scale resistant protective liner systems, chemical systems for lost circulation control, corrosion mitigation in process components at The Geysers, and elastomer-metal bonding systems. Efforts to transfer the technologies developed in these efforts to other energy-related sectors of the economy continued and considerable success was achieved.

  1. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1979-01-01

    A multifaceted program is described in which aeronautical, mechanical, and materials engineers interact to develop composite aircraft structures. Topics covered include: (1) the design of an advanced composite elevator and a proposed spar and rib assembly; (2) optimizing fiber orientation in the vicinity of heavily loaded joints; (3) failure mechanisms and delamination; (4) the construction of an ultralight sailplane; (5) computer-aided design; finite element analysis programs, preprocessor development, and array preprocessor for SPAR; (6) advanced analysis methods for composite structures; (7) ultrasonic nondestructive testing; (8) physical properties of epoxy resins and composites; (9) fatigue in composite materials, and (10) transverse thermal expansion of carbon/epoxy composites.

  2. Optical limiting materials

    DOEpatents

    McBranch, Duncan W.; Mattes, Benjamin R.; Koskelo, Aaron C.; Heeger, Alan J.; Robinson, Jeanne M.; Smilowitz, Laura B.; Klimov, Victor I.; Cha, Myoungsik; Sariciftci, N. Serdar; Hummelen, Jan C.

    1998-01-01

    Optical limiting materials. Methanofullerenes, fulleroids and/or other fullerenes chemically altered for enhanced solubility, in liquid solution, and in solid blends with transparent glass (SiO.sub.2) gels or polymers, or semiconducting (conjugated) polymers, are shown to be useful as optical limiters (optical surge protectors). The nonlinear absorption is tunable such that the energy transmitted through such blends saturates at high input energy per pulse over a wide range of wavelengths from 400-1100 nm by selecting the host material for its absorption wavelength and ability to transfer the absorbed energy into the optical limiting composition dissolved therein. This phenomenon should be generalizable to other compositions than substituted fullerenes.

  3. Aerogel/polymer composite materials

    NASA Technical Reports Server (NTRS)

    Williams, Martha K. (Inventor); Smith, Trent M. (Inventor); Fesmire, James E. (Inventor); Roberson, Luke B. (Inventor); Clayton, LaNetra M. (Inventor)

    2010-01-01

    The invention provides new composite materials containing aerogels blended with thermoplastic polymer materials at a weight ratio of aerogel to thermoplastic polymer of less than 20:100. The composite materials have improved thermal insulation ability. The composite materials also have better flexibility and less brittleness at low temperatures than the parent thermoplastic polymer materials.

  4. Materials informatics: a journey towards material design and synthesis.

    PubMed

    Takahashi, Keisuke; Tanaka, Yuzuru

    2016-06-28

    Materials informatics has been gaining popularity with the rapid development of computational materials science. However, collaborations between information science and materials science have not yet reached the success. There are several issues which need to be overcome in order to establish the field of materials informatics. Construction of material big data, implementation of machine learning, and platform design for materials discovery are discussed with potential solutions. PMID:27292550

  5. Supercapacitors specialities - Materials review

    SciTech Connect

    Obreja, Vasile V. N.

    2014-06-16

    The electrode material is a key component for supercapacitor cell performance. As it is known, performance comparison of commercial available batteries and supercapacitors reveals significantly lower energy storage capability for supercapacitor devices. The energy density of commercial supercapacitor cells is limited to 10 Wh/kg whereas that of common lead acid batteries reaches 35-40 Wh/kg. For lithium ion batteries a value higher than 100 Wh/kg is easily available. Nevertheless, supercapacitors also known as ultracapacitors or electrochemical capacitors have other advantages in comparison with batteries. As a consequence, many efforts have been made in the last years to increase the storage energy density of electrochemical capacitors. A lot of results from published work (research and review papers, patents and reports) are available at this time. The purpose of this review is a presentation of the progress to date for the use of new materials and approaches for supercapacitor electrodes, with focus on the energy storage capability for practical applications. Many reported results refer to nanostructured carbon based materials and the related composites, used for the manufacture of experimental electrodes. A specific capacitance and a specific energy are seldom revealed as the main result of the performed investigation. Thus for nanoprous (activated) carbon based electrodes a specific capacitance up to 200-220 F/g is mentioned for organic electrolyte, whereas for aqueous electrolyte, the value is limited to 400-500 F/g. Significant contribution to specific capacitance is possible from fast faradaic reactions at the electrode-electrolyte interface in addition to the electric double layer effect. The corresponding energy density is limited to 30-50 Wh/kg for organic electrolyte and to 12-17 Wh/kg for aqueous electrolyte. However such performance indicators are given only for the carbon material used in electrodes. For a supercapacitor cell, where two electrodes

  6. Supercapacitors specialities - Materials review

    NASA Astrophysics Data System (ADS)

    Obreja, Vasile V. N.

    2014-06-01

    The electrode material is a key component for supercapacitor cell performance. As it is known, performance comparison of commercial available batteries and supercapacitors reveals significantly lower energy storage capability for supercapacitor devices. The energy density of commercial supercapacitor cells is limited to 10 Wh/kg whereas that of common lead acid batteries reaches 35-40 Wh/kg. For lithium ion batteries a value higher than 100 Wh/kg is easily available. Nevertheless, supercapacitors also known as ultracapacitors or electrochemical capacitors have other advantages in comparison with batteries. As a consequence, many efforts have been made in the last years to increase the storage energy density of electrochemical capacitors. A lot of results from published work (research and review papers, patents and reports) are available at this time. The purpose of this review is a presentation of the progress to date for the use of new materials and approaches for supercapacitor electrodes, with focus on the energy storage capability for practical applications. Many reported results refer to nanostructured carbon based materials and the related composites, used for the manufacture of experimental electrodes. A specific capacitance and a specific energy are seldom revealed as the main result of the performed investigation. Thus for nanoprous (activated) carbon based electrodes a specific capacitance up to 200-220 F/g is mentioned for organic electrolyte, whereas for aqueous electrolyte, the value is limited to 400-500 F/g. Significant contribution to specific capacitance is possible from fast faradaic reactions at the electrode-electrolyte interface in addition to the electric double layer effect. The corresponding energy density is limited to 30-50 Wh/kg for organic electrolyte and to 12-17 Wh/kg for aqueous electrolyte. However such performance indicators are given only for the carbon material used in electrodes. For a supercapacitor cell, where two electrodes

  7. Improved insulation material

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Multilayer material consisting of embossed, silver-coated Mylar, nylon net, and silk net is useful for thermal-protection systems and cryogenic containers. Embossing serves two purposes: helps separate radiation barriers and controls radiant energy diffusion. Insulation requires no maintenance after installation.

  8. PLATO Esperanto Materials.

    ERIC Educational Resources Information Center

    Sherwood, Judith

    1981-01-01

    A summary is presented of types of Esperanto materials available on PLATO--a general overview section, a picture introduction, lessons that accompany a textbook, vocabulary drills, crossword puzzles, dictation drills, reading practice, and a concentration game. The general overview lesson gives a comprehensive summary of the history and…

  9. Shakespeare Materials. Potpourri 7.

    ERIC Educational Resources Information Center

    Mathis, N. Reed

    This publication provides a source of practical ideas for teaching Shakespeare, taken from materials in the teaching notebooks of N. Reed Mathis, a Shakespeare specialist. It contains: (1) "As You Like It"--a study guide and composition topics; (2) "Romeo and Juliet"--an objective-type final exam; (3) "Sonnets"--a way of analyzing a poem, critical…

  10. Challenges to LRS Materials.

    ERIC Educational Resources Information Center

    Austin Community Coll., TX.

    The Learning Resource Services (LRS) department at Austin Community College, in Texas, has developed a procedure for dealing with situations when a library user objects to items in a collection or display or protests that an item is not in the collection. First, three resources have been created to handle challenges. The LRS Materials Selection…

  11. Microgravity Materials Science Laboratory

    NASA Technical Reports Server (NTRS)

    Grisaffe, S. J.

    1985-01-01

    A Microgravity Materials Science Laboratory (MMSL) has been planned, designed, and is being developed. This laboratory will support related efforts to define the requirements for the Microgravity and Materials Processing Laboratory (MMPF) and the MMPF Test Bed for the Space Station. The MMSL will serve as a check out and training facility for science mission specialists for STS, Spacelab and Space Station prior to the full operation of the MMPF Test Bed. The focus of the MMSL will be on experiments related to the understanding of metal/ceramic/glass solidification, high perfection crystal growth and fluid physics. This ground-based laboratory will be used by university/industry/government researchers to examine and become familiar with the potential of new microgravity materials science concepts and to conduct longer term studies aimed at fully developing a l-g understanding of materials and processing phenomena. Such research will help create new high quality concepts for space experiments and will provide the basis for modeling, theories, and hypotheses upon which key space experiments can be defined and developed.

  12. Bibliography of AV Materials.

    ERIC Educational Resources Information Center

    Journal of Chemical Education, 1981

    1981-01-01

    Presented is the second part of a bibliographic listing of commercially available audiovisual materials for chemistry. Information includes producer (with addresses), catalog number, format (slides, cassettes, filmstrips, films), and price for items in these categories: matter and energy, nuclear chemistry, periodic table, solids and crystals,…

  13. Advanced desiccant materials research

    NASA Astrophysics Data System (ADS)

    Czanderna, A. W.; Thomas, T. M.

    1986-05-01

    The long-range goal of this task is to understand the role of surface phenomena in desiccant cooling materials. The background information includes a brief introduction to desiccant cooling systems (DCS) and the role of the desiccant as a system component. The purpose, background, rationale, and long-term technical approach for studying advanced desiccant materials are then treated. Experimental methods for measuring water vapor sorption by desiccants are described, and the rationale is then given for choosing a quartz crystal microbalance (QCM) for measuring sorption isotherms, rates, and cyclic stability. Background information is given about the QCM, including the quartz crystal resonator itself, the support structure for the quartz crystal, and the advantages and limitations of a QCM. The apparatus assembled and placed into operation during CY 1985 is described. The functions of the principal components of the equipment, i.e., the QCM, vacuum system, pressure gauges, residual gas analyzer, constant temperature bath, and data acquisition system, are described as they relate to the water vapor sorption measurements now under way. The criteria for narrowing the potential candidates as advanced desiccant materials for the initial studies are given. Also given is a list of 20 principal candidate materials identified based on the criteria and data available in the literature.

  14. Kurdish. Materials Status Report.

    ERIC Educational Resources Information Center

    Center for Applied Linguistics, Washington, DC. Language/Area Reference Center.

    The materials status report for Kurdish is one of a series intended to provide the nonspecialist with a picture of the availability and quality of texts for teaching a given language to English speakers. Each report consists of: (1) a brief narrative description of the language, the areas where it is spoken, its major dialects, its writing system,…

  15. Processing of lunar materials

    NASA Astrophysics Data System (ADS)

    Poisl, W. Howard; Fabes, B. D.

    1994-07-01

    A variety of products made from lunar resources will be required for a lunar outpost. These products might be made by adapting existing processing techniques to the lunar environment, or by developing new techniques unique to the moon. In either case, processing techniques used on the moon will have to have a firm basis in basic principles of materials science and engineering, which can be used to understand the relationships between composition, processing, and properties of lunar-derived materials. These principles can also be used to optimize the properties of a product, once a more detailed knowledge of the lunar regolith is obtained. Using three types of ceramics (monolithic glasses, glass fibers, and glass-ceramics) produced from lunar simulants, we show that the application of materials science and engineering priciples is useful in understanding and optimizing the mechanical properties of ceramics on the moon. We also demonstrate that changes in composition and/or processing can have a significant effect on the strength of these materials.

  16. Processing Materials in Space

    NASA Technical Reports Server (NTRS)

    Zoller, L. K.

    1982-01-01

    Suggested program of material processing experiments in space described in 81 page report. For each experiment, report discusses influence of such gravitational effects as convection, buoyancy, sedimentation, and hydrostatic pressure. Report contains estimates of power and mission duration required for each experiment. Lists necessary equipment and appropriate spacecraft.

  17. Synthesis of refractory materials

    DOEpatents

    Holt, J.B.

    Refractory metal nitrides are synthesized during a combustion process utilizing a solid source of nitrogen. For this purpose, a metal azide is employed. The azide is combusted with a transition metal of the IIIB, IVB group, or a rare earth metal, and ignited to produce the refractory material.

  18. The DNA of Materials

    ERIC Educational Resources Information Center

    Abdul-Razzaq, Wathiq N.; Bushey, Ryan K.

    2009-01-01

    Introductory physics labs provide many challenging yet applicable experiments and concepts to the many fields of engineering. One such lab has been developed at West Virginia University that explores resistivities of several different materials and ties this concept into electrical engineering practices and standards. Many students do not realize…

  19. Femtosecond laser materials processing

    SciTech Connect

    Stuart, B.C.

    1997-02-01

    The use femtosecond pulses for materials processing results in very precise cutting and drilling with high efficiency. Energy deposited in the electrons is not coupled into the bulk during the pulse, resulting in negligible shock or thermal loading to adjacent areas.

  20. Another possible PGEC material

    NASA Astrophysics Data System (ADS)

    Schujman, Sandra; Slack, Glen

    2001-03-01

    Lead Telluride is a material used as a thermoelectric power generator, with a dimensionless figure of merit, ZT, of about 0.7 at a temperature of 700K. Its thermal conductivity at room temperature is about eight times the value calculated by Slack for the minimum thermal conductivity of PbTe, which is 2.5mW/cm.K. Its crystalline structure is rocksalt, with a lattice parameter of 6.462ÅThere is not enough room between atoms to place a loose atom that can scatter phonons so we need to alter it in order to obtain a Phonon-Glass, Electron-Crystal material. Our idea is to disperse endohedral fullerenes into the lead telluride matrix. The atoms filling these fullerenes can scatter heat-carrying phonons. Given the high dielectric constant of lead telluride, we expect the disturbance to the electrical properties of the material to be minimal. Preliminary calculations of the thermal conductivity of this material indicate that we should be able to reach the minimum thermal conductivity of pure lead telluride with an approximate volume concentration of C_60 in the order of 7%. We shall present results of calculations for several different endohedral fullerenes.