Science.gov

Sample records for anode glow discharge

  1. Powerful glow discharge excilamp

    DOEpatents

    Tarasenko, Victor F.; Panchenko, Aleksey N.; Skakun, Victor S.; Sosnin, Edward A.; Wang, Francis T.; Myers, Booth R.; Adamson, Martyn G.

    2002-01-01

    A powerful glow discharge lamp comprising two coaxial tubes, the outer tube being optically transparent, with a cathode and anode placed at opposite ends of the tubes, the space between the tubes being filled with working gas. The electrodes are made as cylindrical tumblers placed in line to one other in such a way that one end of the cathode is inserted into the inner tube, one end of the anode coaxially covers the end of the outer tube, the inner tube penetrating and extending through the anode. The increased electrodes' surface area increases glow discharge electron current and, correspondingly, average radiation power of discharge plasma. The inner tube contains at least one cooling liquid tube placed along the axis of the inner tube along the entire lamp length to provide cathode cooling. The anode has a circumferential heat extracting radiator which removes heat from the anode. The invention is related to lighting engineering and can be applied for realization of photostimulated processes under the action of powerful radiation in required spectral range.

  2. Effect of the electric field of the anode sheath on the growth of aligned carbon nanotubes in a glow discharge

    SciTech Connect

    Pal', A. F.; Rakhimova, T. V.; Suetin, N. V.; Timofeev, M. A.; Filippov, A. V.

    2007-01-15

    Arrays of aligned carbon nanotubes on silicon substrates were grown in the anode sheath of a dc glow discharge. In order to clarify the role of the electric field in the growth of nanotubes, numerical simulations of charged particle transport in the anode sheath were carried out in the drift-diffusion approximation. The distributions of the charged particle density and electric field are obtained. Possible mechanisms whereby the electric field influences the growth of aligned carbon nanotubes are analyzed. It is found that the nanotubes grow in the region in which the electric field is enhanced due to the depletion of positive ions in the anode sheath.

  3. Destruction of 4-phenolsulfonic acid in water by anodic contact glow discharge electrolysis.

    PubMed

    Yang, Haiming; An, Baigang; Wang, Shaoyan; Li, Lixiang; Jin, Wenjie; Li, Lihua

    2013-06-01

    Destruction of 4-phenolsulfonic acid (4-PSA) in water was carried out using anodic contact glow discharge electrolysis. Accompanying the decay of 4-PSA, the amount of total organic carbon (TOC) in water correspondingly decreased, while the sulfonate group of 4-PSA was released as sulfate ion. Oxalate and formate were obtained as minor by-products. Additionally, phenol, 1,4-hydroquinone, hydroxyquinol and 1,4-benzoquinone were detected as primary intermediates in the initial stages of decomposition of 4-PSA. A reaction pathway involving successive attacks of hydroxyl and hydrogen radicals was assumed on the basis of the observed products and kinetics. It was revealed that the decay of both 4-PSA and TOC obeyed a first-order rate law. The effects of different Fe ions and initial concentrations of 4-PSA on the degradation rate were investigated. It was found that the presence of Fe ions could increase the degradation rate of 4-PSA, while initial concentrations lower than 80 mmol/L had no significant effect on kinetic behaviour. The disappearance rate of 4-PSA was significantly affected by pH. PMID:24191593

  4. Glow discharge plasma deposition of thin films

    DOEpatents

    Weakliem, Herbert A.; Vossen, Jr., John L.

    1984-05-29

    A glow discharge plasma reactor for deposition of thin films from a reactive RF glow discharge is provided with a screen positioned between the walls of the chamber and the cathode to confine the glow discharge region to within the region defined by the screen and the cathode. A substrate for receiving deposition material from a reactive gas is positioned outside the screened region. The screen is electrically connected to the system ground to thereby serve as the anode of the system. The energy of the reactive gas species is reduced as they diffuse through the screen to the substrate. Reactive gas is conducted directly into the glow discharge region through a centrally positioned distribution head to reduce contamination effects otherwise caused by secondary reaction products and impurities deposited on the reactor walls.

  5. Evolution of Striation in Pulsed Glow Discharges

    NASA Astrophysics Data System (ADS)

    Liu, Yuanye; He, Feng; Zhao, Xiaofei; Ouyang, Jiting

    2016-01-01

    In this work, striations in pulsed glow discharges are studied by experiments and Particle-In-Cell/Monte Carlo Collision (PIC/MCC) simulation. The spatio-temporal evolution of the potential and the electron energy during the discharge are analyzed. The processes of striation formation in pulsed glow discharges and dielectric barrier discharges (DBD) are compared. The results show that the mechanisms of striation in pulsed DC discharge and DBD are similar to each other. The evolution of electron energy distribution function before and after the striation formation indicates that the striation results from the potential well of the space charge. During a pulsed breakdown, the striations are formed one by one towards the anode in a weak field channel. This indicates that the formation of striations in a pulsed discharge depends on the flow of modulated electrons. supported by National Natural Science Foundation of China (Nos. 10875010 and 11175017)

  6. Constricted glow discharge plasma source

    DOEpatents

    Anders, Andre; Anders, Simone; Dickinson, Michael; Rubin, Michael; Newman, Nathan

    2000-01-01

    A constricted glow discharge chamber and method are disclosed. The polarity and geometry of the constricted glow discharge plasma source is set so that the contamination and energy of the ions discharged from the source are minimized. The several sources can be mounted in parallel and in series to provide a sustained ultra low source of ions in a plasma with contamination below practical detection limits. The source is suitable for applying films of nitrides such as gallium nitride and oxides such as tungsten oxide and for enriching other substances in material surfaces such as oxygen and water vapor, which are difficult process as plasma in any known devices and methods. The source can also be used to assist the deposition of films such as metal films by providing low-energy ions such as argon ions.

  7. Glow discharge conditioning of the PDX vacuum vessel

    SciTech Connect

    Dylla, H.F.; Cohen, S.A.; Rossnagel, S.M.; McCracken, G.M.; Staib, P.

    1980-03-01

    A glow discharge technique has been developed and applied to the conditioning of the large (38 m/sup 3/) Poloidal Divertor Experiment (PDX) vacuum vessel. The discharge parameters and working gas (H/sub 2/) were chosen to maximize C and O removal and minimize metal sputtering. The glow discharge was produced by biasing one or two internal anodes at 400 V to sustain a discharge current of 2 to 4 A per anode. Purified H/sub 2/ at a pressure of 3 x 10/sup -2/ torr was flowed through PDX at approx. 10 t-l/s. The effectiveness of the glow discharge conditioning was monitored by measuring impurity gas (CH/sub 4/, C/sub 2/H/sub 4/, and CO) exhaust rates by mass spectrometry and C and O surface removal rates by in-situ AES and XPS.

  8. Atmospheric sampling glow discharge ionization source

    DOEpatents

    McLuckey, Scott A.; Glish, Gary L.

    1989-01-01

    An atmospheric sampling glow discharge ionization source that can be used in combination with an analytical instrument which operates at high vacuum, such as a mass spectrometer. The atmospheric sampling glow discharge ionization source comprises a chamber with at least one pair of electrodes disposed therein, an inlet for a gaseous sample to be analyzed and an outlet communicating with an analyzer which operates at subatmospheric pressure. The ionization chamber is maintained at a pressure below atmospheric pressure, and a voltage difference is applied across the electrodes to induce a glow discharge between the electrodes, so that molecules passing through the inlet are ionized by the glow discharge and directed into the analyzer. The ionization source accepts the sample under atmospheric pressure conditions and processes it directly into the high vacuum instrument, bridging the pressure gap and drawing off unwanted atmospheric gases. The invention also includes a method for analyzing a gaseous sample using the glow discharge ionization source described above.

  9. Atmospheric sampling glow discharge ionization source

    DOEpatents

    McLuckey, S.A.; Glish, G.L.

    1989-07-18

    An atmospheric sampling glow discharge ionization source that can be used in combination with an analytical instrument which operates at high vacuum, such as a mass spectrometer. The atmospheric sampling glow discharge ionization source comprises a chamber with at least one pair of electrodes disposed therein, an inlet for a gaseous sample to be analyzed and an outlet communicating with an analyzer which operates at subatmospheric pressure. The ionization chamber is maintained at a pressure below atmospheric pressure, and a voltage difference is applied across the electrodes to induce a glow discharge between the electrodes, so that molecules passing through the inlet are ionized by the glow discharge and directed into the analyzer. The ionization source accepts the sample under atmospheric pressure conditions and processes it directly into the high vacuum instrument, bridging the pressure gap and drawing off unwanted atmospheric gases. The invention also includes a method for analyzing a gaseous sample using the glow discharge ionization source described above. 3 figs.

  10. Electron concentration distribution in a glow discharge in air flow

    NASA Astrophysics Data System (ADS)

    Mukhamedzianov, R. B.; Gaisin, F. M.; Sabitov, R. A.

    1989-04-01

    Electron concentration distributions in a glow discharge in longitudinal and vortex air flows are determined from the attenuation of the electromagnetic wave passing through the plasma using microwave probes. An analysis of the distribution curves obtained indicates that electron concentration decreases in the direction of the anode. This can be explained by charge diffusion toward the chamber walls and electron recombination and sticking within the discharge.

  11. Flowing Liquid Anode Atmospheric Pressure Glow Discharge as an Excitation Source for Optical Emission Spectrometry with the Improved Detectability of Ag, Cd, Hg, Pb, Tl, and Zn.

    PubMed

    Greda, Krzysztof; Swiderski, Krzysztof; Jamroz, Piotr; Pohl, Pawel

    2016-09-01

    A novel atmospheric pressure glow discharge generated in contact with a flowing liquid anode (FLA-APGD) was developed as the efficient excitation source for the optical emission spectrometry (OES) detection. Differences in the appearance and the electrical characteristic of the FLA-APGD and a conventional system operated with a flowing liquid cathode (FLC-APGD) were studied in detail and discussed. Under the optimal operating conditions for the FLA-APGD, the emission from the analytes (Ag, Cd, Hg, Pb, Tl, and Zn) was from 20 to 120 times higher as compared to the FLC-APGD. Limits of detections (LODs) established with a novel FLA-APGD system were on average 20 times better than those obtained for the FLC-APGD. A further improvement of the LODs was achieved by reducing the background shift interferences and, as a result, the LODs for Ag, Cd, Hg, Pb, Tl, and Zn were 0.004, 0.040, 0.70, 1.7, 0.035, and 0.45 μg L(-1), respectively. The precision of the FLA-APGD-OES method was evaluated to be within 2-5% (as the relative standard deviation of the repeated measurements). The method found its application in the determination of the content of Ag, Cd, Hg, Pb, Tl, and Zn in a certified reference material (CRM) of Lobster hepatopancreas (TORT-2), four brass samples as well as mineral water and tea leaves samples spiked with the analytes. In the case of brass samples, a reference method, i.e., inductively coupled plasma optical emission spectrometry (ICP-OES) was used. A good agreement between the results obtained with FLA-APGD-OES and the certified values for the CRM TORT-2 as well as the reference values obtained with ICP-OES for the brass samples was revealed, indicating the good accuracy of the proposed method. The recoveries obtained for the spiked samples of mineral water and tea leaves were within the range of 97.5-102%. PMID:27476678

  12. Normal glow discharge in axial magnetic field

    NASA Astrophysics Data System (ADS)

    Surzhikov, S.; Shang, J.

    2014-10-01

    Theory and results of mathematical modeling of a glow discharge in a parallel-plate configuration with axial magnetic field is presented. The model consists of continuity equations for electron and ion fluids, the Poisson equation for the self-consistent electric field. Numerical simulation results are presented for two-dimensional glow discharge at various initial conditions. The results are obtained for molecular nitrogen at pressure 1-5 Torr, emf of power supply 1-2 kV, and magnetic field induction B = 0-0.5 T. It is shown that in the presence of the axial magnetic field the glow discharge is rotated around its axis of symmetry. Nevertheless it is shown that in the investigated range of discharge parameters in an axial magnetic field the law of the normal current density is retained.

  13. Striations in an ethyl alcohol glow discharge

    NASA Astrophysics Data System (ADS)

    Reyes, P. G.; Gómez, A.; Torres, C.; Martínez, H.; Castillo, F.; Vergara, J.

    2015-03-01

    This research shows the behavior of striations in glow discharge generated with high purity ethyl alcohol at a pressure of 0.6 Torr. This paper present the number of striations as a function of the of current and voltage discharge.

  14. Detrapping of tungsten nanoparticles in a direct-current argon glow discharge

    NASA Astrophysics Data System (ADS)

    Couëdel, L.; Kumar K., Kishor; Arnas, C.

    2014-12-01

    Nanoparticles are grown from the sputtering of a tungsten cathode in a direct current argon glow discharge. Laser light scattering of a vertical laser sheet going through the plasma reveals that the dust particle cloud is compressed and pushed towards the anode during the discharge. Scanning electron microscopy images of substrates exposed to the plasma for given durations show that dust particles are continuously falling down on the anode during the discharge. These observations are explained by the fact that the electrostatic force at the negative glow-anode sheath boundary cannot balance the ion drag, gravity, and thermophoresis forces for particles of more than a few tens of nanometres in diameter.

  15. Detrapping of tungsten nanoparticles in a direct-current argon glow discharge

    SciTech Connect

    Couëdel, L. Kumar, K. Kishor; Arnas, C.

    2014-12-15

    Nanoparticles are grown from the sputtering of a tungsten cathode in a direct current argon glow discharge. Laser light scattering of a vertical laser sheet going through the plasma reveals that the dust particle cloud is compressed and pushed towards the anode during the discharge. Scanning electron microscopy images of substrates exposed to the plasma for given durations show that dust particles are continuously falling down on the anode during the discharge. These observations are explained by the fact that the electrostatic force at the negative glow-anode sheath boundary cannot balance the ion drag, gravity, and thermophoresis forces for particles of more than a few tens of nanometres in diameter.

  16. Immobilization of proteins on glow discharge treated polymers

    NASA Astrophysics Data System (ADS)

    Kiaei, D.; Safranj, A.; Chen, J. P.; Johnston, A. B.; Zavala, F.; Deelder, A.; Castelino, J. B.; Markovic, V.; Hoffman, A. S.

    Certain glow discharge-treated surfaces have been shown to enhance retention of adsorbed proteins. On the basis of this phenomenon, we have investigated the possibility of immobilizing (a) albumin for developing thromboresistant and non-fouling surfaces, (b) antibodies for immuno-diagnostic assays and (c) enzymes for various biosensors and industrial bioprocesses. Albumin retention was highest on surfaces treated with tetrafluoroethylene (TFE) compared to untreated surfaces or other glow discharge treatments studied. Preadsorption of albumin on TFE-treated surfaces resulted in low fibrinogen adsorption and platelet adhesion. IgG retention was also highest on TFE-treated surfaces. The lower detection limits of both malaria antigen and circulating anodic antigen of the schistosomiasis worm were enhanced following glow discharge treatment of the assay plates with TFE. Both TFE and tetrachloroethylene (TCE) glow discharge treated surfaces showed high retention of adsorbed horseradish peroxidase (HRP). However, the retained specific activity of HRP after adsorption on TCE-treated surfaces was remarkably higher than on TFE-treated surfaces.

  17. Nitrogen Glow Discharge by a DC Virtual Cathode

    NASA Astrophysics Data System (ADS)

    Shager, Azza M.; Sroor, Amany T.; Tayeb, Hoda A. El; Gamal, Hoda A. El; Masoud, Mohamed M.

    2008-08-01

    A DC glow discharge operating with a virtual cathode is studied. The system consists of a solid disc cathode and mesh anode. The discharge occurs in nitrogen gas at the left-hand side of Paschen's curve. The plasma electron density in the axial direction has been found to be 0.2 · 108 cm-3 at 2 cm from the mesh. The electron temperature peak value has been found to be 3.5 eV at 6 cm from the mesh. The radial distribution of the plasma electron density and temperature are discussed. The variation of the plasma parameters are in good agreement with the experimental results.

  18. Influence of annular magnet on discharge characteristics in enhanced glow discharge plasma immersion ion implantation

    SciTech Connect

    Li Liuhe; Wang Zhuo; Lu Qiuyuan; Fu, Ricky K. Y.; Chu, Paul K.; Pang Enjing; Dun Dandan; He Fushun; Li Fen

    2011-01-10

    A permanent annular magnet positioned at the grounded anode alters the discharge characteristics in enhanced glow discharge plasma immersion ion implantation (EGD-PIII). The nonuniform magnetic field increases the electron path length and confines electron motion due to the magnetic mirror effect and electron-neutral collisions thus occur more frequently. The plasma potential and ion density measured by a Langmuir probe corroborate that ionization is improved near the grounded anode. This hybrid magnetic field EGD-PIII method is suitable for implantation of gases with low ionization rates.

  19. Dynamics of multiple double layers in high pressure glow discharge in a simple torus

    SciTech Connect

    Kumar Paul, Manash; Sharma, P. K.; Thakur, A.; Kulkarni, S. V.; Bora, D.

    2014-06-15

    Parametric characterization of multiple double layers is done during high pressure glow discharge in a toroidal vessel of small aspect ratio. Although glow discharge (without magnetic field) is known to be independent of device geometry, but the toroidal boundary conditions are conducive to plasma growth and eventually the plasma occupy the toroidal volume partially. At higher anode potential, the visibly glowing spots on the body of spatially extended anode transform into multiple intensely luminous spherical plasma blob structures attached to the tip of the positive electrode. Dynamics of multiple double layers are observed in argon glow discharge plasma in presence of toroidal magnetic field. The radial profiles of plasma parameters measured at various toroidal locations show signatures of double layer formation in our system. Parametric dependence of double layer dynamics in presence of toroidal magnetic field is presented here.

  20. Use of glow discharge in fluidized beds

    NASA Technical Reports Server (NTRS)

    Wydeven, T.; Wood, P. C.; Ballou, E. V.; Spitze, L. A. (Inventor)

    1981-01-01

    Static charges and agglomerization of particles in a fluidized bed systems are minimized by maintaining in at least part of the bed a radio frequency glow discharge. This approach is eminently suitable for processes in which the conventional charge removing agents, i.e., moisture or conductive particle coatings, cannot be used. The technique is applied here to the disproportionation of calcium peroxide diperoxyhydrate to yield calcium superoxide, an exceptionally water and heat sensitive reaction.

  1. Is the negative glow plasma of a direct current glow discharge negatively charged?

    SciTech Connect

    Bogdanov, E. A.; Saifutdinov, A. I.; Demidov, V. I.; Kudryavtsev, A. A.

    2015-02-15

    A classic problem in gas discharge physics is discussed: what is the sign of charge density in the negative glow region of a glow discharge? It is shown that traditional interpretations in text-books on gas discharge physics that states a negative charge of the negative glow plasma are based on analogies with a simple one-dimensional model of discharge. Because the real glow discharges with a positive column are always two-dimensional, the transversal (radial) term in divergence with the electric field can provide a non-monotonic axial profile of charge density in the plasma, while maintaining a positive sign. The numerical calculation of glow discharge is presented, showing a positive space charge in the negative glow under conditions, where a one-dimensional model of the discharge would predict a negative space charge.

  2. Is the negative glow plasma of a direct current glow discharge negatively charged?

    NASA Astrophysics Data System (ADS)

    Bogdanov, E. A.; Demidov, V. I.; Kudryavtsev, A. A.; Saifutdinov, A. I.

    2015-02-01

    A classic problem in gas discharge physics is discussed: what is the sign of charge density in the negative glow region of a glow discharge? It is shown that traditional interpretations in text-books on gas discharge physics that states a negative charge of the negative glow plasma are based on analogies with a simple one-dimensional model of discharge. Because the real glow discharges with a positive column are always two-dimensional, the transversal (radial) term in divergence with the electric field can provide a non-monotonic axial profile of charge density in the plasma, while maintaining a positive sign. The numerical calculation of glow discharge is presented, showing a positive space charge in the negative glow under conditions, where a one-dimensional model of the discharge would predict a negative space charge.

  3. Glow discharge based device for solving mazes

    SciTech Connect

    Dubinov, Alexander E. Mironenko, Maxim S.; Selemir, Victor D.; Maksimov, Artem N.; Pylayev, Nikolay A.

    2014-09-15

    A glow discharge based device for solving mazes has been designed and tested. The device consists of a gas discharge chamber and maze-transformer of radial-azimuth type. It allows changing of the maze pattern in a short period of time (within several minutes). The device has been tested with low pressure air. Once switched on, a glow discharge has been shown to find the shortest way through the maze from the very first attempt, even if there is a section with potential barrier for electrons on the way. It has been found that ionization waves (striations) can be excited in the maze along the length of the plasma channel. The dependancy of discharge voltage on the length of the optimal path through the maze has been measured. A reduction in discharge voltage with one or two potential barriers present has been found and explained. The dependency of the magnitude of discharge ignition voltage on the length of the optimal path through the maze has been measured. The reduction of the ignition voltage with the presence of one or two potential barriers has been observed and explained.

  4. Shock wave propagation in glow discharges

    NASA Astrophysics Data System (ADS)

    Ganguly, B. N.

    1998-10-01

    The modification of acoustic shock wave propagation characteristics in a 25 cm long positive column low pressure (10 to 50 Torr), low current density (2 to 10 mA/cm^2) argon and N2 dc discharges have been measured by laser beam deflection technique. The simultaneous multi point shock velocity, dispersion and damping have been measured both inside and outside the glow discharge region. The local shock velocity is found to increase with the increased propagation path length through the discharge; for Mach number greater than 1.7 the upstream velocity exceeded the downstream velocity in contrast to the opposite behavior in neutral gas. The damping and dispersion are also dependent on the propagation distance. The recovery of the shock dispersion and damping in the post discharge region, for a given discharge condition, are functions of the initial Mach number. The optical measurement of the wall and the gas (rotational) temperatures suggest the observed shock features can not be solely explained by the gas heating in a self sustained discharge. The results are similar for both Ar and N2 discharges showing that vibrational excitation and relaxation are not essential^1. The explanation of the observed weak shock propagation properties in a glow discharge appears to require long range cooperative interactions that enhance heavy particle collisional energy transfer rates for the measured discharge conditions. Unlike collisional shock wave propagation in highly ionized plasmas^2,3, the exact energy coupling mechanism between the nonequilibrium weakly ionized plasma and shock is not understood. 1. A.I. Osipov and A.V. Uvarov, Sov. Phys. Usp. 35, 903 (1992) and other references there in. 2. M. Casanova, O. Larroche and J-P Matte, Phys. Rev. Lett. 67, 2143 (1991). 3. M.C.M. van de Sanden, R. van den Bercken and D.C. Schram, Plasma Sources Sci.Technol. 3, 511 (1994).

  5. Power balance at cathode in glow discharges

    SciTech Connect

    Suraj, K.S.; Mukherjee, S.

    2005-11-15

    When an electrode is biased negatively ({approx} few hundred volts) with respect to a metallic chamber, maintained at a subatmospheric pressure ({approx} few millibars), glow discharge plasma is formed around the electrode (cathode). The plasma supplies ions and other species to the cathode, along with other events at the cathode, and its temperature also rises. From the measurement of temporal temperature profile, in the pressure range of 0.5-5 mbars, the thermal influx at the cathode has been determined. Various modes of power input to the cathode are estimated from the discharge parameters. The contribution of ions and neutrals to the total input power is obtained theoretically from respective velocity distributions at the cathode considering charge exchange as the dominant collision mechanism inside the sheath region. The comparison of experimental and theoretical results suggests that in the pressure range being considered, which is typical of glow discharges, the major contribution to the energy input at the cathode comes from energetic neutrals generated by the charge-exchange collision inside the collisional ion sheath.

  6. Phenomena of oscillations in atmospheric pressure direct current glow discharges

    SciTech Connect

    Liu, Fu-cheng; Yan, Wen; Wang, De-zhen

    2013-12-15

    Self-sustained oscillations in a dc glow discharge with a semiconductor layer at atmospheric pressure were investigated by means of a one-dimensional fluid model. It is found that the dc glow discharge initially becomes unstable in the subnormal glow region and gives rise to oscillations of plasma parameters. A variety of oscillations with one or more frequencies have been observed under different conditions. The discharge oscillates between the glow discharge mode and the Townsend discharge mode in the oscillations with large amplitude while operates in the subnormal glow discharge mode all the while in the oscillations with small amplitude. Fourier Transform spectra of oscillations reveal the transition mechanism between different oscillations. The effects of semiconductor conductivity on the oscillation frequency of the dominant mode, gas voltage, as well as the discharge current have also been analyzed.

  7. Coaxial (tubular) glow discharge in electronegative gases

    NASA Astrophysics Data System (ADS)

    Golovitskii, A. P.

    2016-07-01

    The positive-column plasma of a low- and medium-pressure electronegative glow discharge initiated in the gap between two coaxial cylindrical tubes has been considered (the current is directed along the tube axis). It is assumed that the gas mixture contains halogens, and ion diffusion is not negligibly weak. It is found that the coaxial discharge is characterized by plasma separation into three coaxial regions with different compositions in the direction transverse to the current. It has been shown that the ionization and excitation frequencies of atoms are higher than in the purely cylindrical case, even for a small (0.05-0.15) ratio of the radii of the inner and outer walls. An asymptotic analysis of the continuity equations yields analytic expressions that make it possible to rapidly and easily estimate the geometrical parameters of the spatial distributions of charge particle concentrations, as well as energy parameters of the plasma for the radii ratio that exceed 0.3. The conditions for the applicability of analytic relations and their accuracy are established from a comparison of the results of analytic and numerical calculations.

  8. Advances in the Remote Glow Discharge Experiment

    NASA Astrophysics Data System (ADS)

    Dominguez, Arturo; Zwicker, A.; Rusaits, L.; McNulty, M.; Sosa, Carl

    2014-10-01

    The Remote Glow Discharge Experiment (RGDX) is a DC discharge plasma with variable pressure, end-plate voltage and externally applied axial magnetic field. While the experiment is located at PPPL, a webcam displays the live video online. The parameters (voltage, magnetic field and pressure) can be controlled remotely in real-time by opening a URL which shows the streaming video, as well as a set of Labview controls. The RGDX is designed as an outreach tool that uses the attractive nature of a plasma in order to reach a wide audience and extend the presence of plasma physics and fusion around the world. In March 2014, the RGDX was made publically available and, as of early July, it has had approximately 3500 unique visits from 107 countries and almost all 50 US states. We present recent upgrades, including the ability to remotely control the distance between the electrodes. These changes give users the capability of measuring Paschen's Law remotely and provides a comprehensive introduction to plasma physics to those that do not have access to the necessary equipment.

  9. Effect of a floating circular aperture on a dc glow discharge dusty plasma

    NASA Astrophysics Data System (ADS)

    Heinrich, Jonathon R.; Kim, Su-Hyun; Merlino, Robert L.

    2009-11-01

    We have investigated novel effects observed when a floating aperture, either 6 mm or 8 mm in diameter, is placed 1-2 cm in front of an anode disk (4 cm diameter) that is used to form a dc glow discharge dusty plasma. Dust is incorporated into the anode glow plasma from a tray located below the anode which contained kaolin powder. The glow discharge traps particles with an average size of 1 micron. When the aperture is placed in front of the disk, well-defined pear-shaped or spherical dust clouds are formed, depending on the diameter of the aperture and its distance from the anode. The dust interacts with the aperture through the potential structure associated with the floating (negative) plate in which the aperture is located. The dust cloud is imaged using a CCD camera and a thin sheet of 532 nm laser light. Some of the effects observed include: outwardly expanding spherical dust acoustic waves and shocks, dust rotation around a void formed at the aperture, and a dust/discharge instability in which the discharge is periodically quenched and reignited while the dust cloud expands and contracts, with the dust retaining a residual charge.

  10. Glow Discharge Characteristics in Transverse Supersonic Air Flow

    NASA Astrophysics Data System (ADS)

    Timerkaev, B. A.; Zalyaliev, B. R.; Saifutdinov, A. I.

    2014-11-01

    A low pressure glow discharge in a transverse supersonic gas flow of air at pressures of the order 1 torr has been experimentally studied for the case where the flow only partially fills the inter electrode gap. It is shown that the space region with supersonic gas flow has a higher concentration of gas particles and, therefore, works as a charged particle generator. The near electrode regions of glow discharge are concentrated specifically in this region. This structure of glow discharge is promising for plasma deposition of coatings under ultralow pressures

  11. Non-linear macro evolution of a dc driven micro atmospheric glow discharge

    NASA Astrophysics Data System (ADS)

    Xu, S. F.; Zhong, X. X.

    2015-10-01

    We studied the macro evolution of the micro atmospheric glow discharge generated between a micro argon jet into ambient air and static water. The micro discharge behaves similarly to a complex ecosystem. Non-linear behaviors are found for the micro discharge when the water acts as a cathode, different from the discharge when water behaves as an anode. Groups of snapshots of the micro discharge formed at different discharge currents are captured by an intensified charge-coupled device with controlled exposure time, and each group consisted of 256 images taken in succession. Edge detection methods are used to identify the water surface and then the total brightness is defined by adding up the signal counts over the area of the micro discharge. Motions of the water surface at different discharge currents show that the water surface lowers increasingly rapidly when the water acts as a cathode. In contrast, the water surface lowers at a constant speed when the water behaves as an anode. The light curves are similar to logistic growth curves, suggesting that a self-inhibition process occurs in the micro discharge. Meanwhile, the total brightness increases linearly during the same time when the water acts as an anode. Discharge-water interactions cause the micro discharge to evolve. The charged particle bomb process is probably responsible for the different behaviors of the micro discharges when the water acts as cathode and anode.

  12. Non-linear macro evolution of a dc driven micro atmospheric glow discharge

    SciTech Connect

    Xu, S. F.; Zhong, X. X.

    2015-10-15

    We studied the macro evolution of the micro atmospheric glow discharge generated between a micro argon jet into ambient air and static water. The micro discharge behaves similarly to a complex ecosystem. Non-linear behaviors are found for the micro discharge when the water acts as a cathode, different from the discharge when water behaves as an anode. Groups of snapshots of the micro discharge formed at different discharge currents are captured by an intensified charge-coupled device with controlled exposure time, and each group consisted of 256 images taken in succession. Edge detection methods are used to identify the water surface and then the total brightness is defined by adding up the signal counts over the area of the micro discharge. Motions of the water surface at different discharge currents show that the water surface lowers increasingly rapidly when the water acts as a cathode. In contrast, the water surface lowers at a constant speed when the water behaves as an anode. The light curves are similar to logistic growth curves, suggesting that a self-inhibition process occurs in the micro discharge. Meanwhile, the total brightness increases linearly during the same time when the water acts as an anode. Discharge-water interactions cause the micro discharge to evolve. The charged particle bomb process is probably responsible for the different behaviors of the micro discharges when the water acts as cathode and anode.

  13. Glow discharge techniques for conditioning high vacuum systems

    SciTech Connect

    Dylla, H.F.

    1988-03-01

    A review is given of glow discharge techniques which are useful for conditioning vacuum vessels for high vacuum applications. Substantial development of glow discharge techniques has been done for the purpose of in-situ conditioning of the large ultrahigh vacuum systems for particle accelerators and magnetic fusion devices. In these applications the glow discharge treatments remove impurities from vessel surfaces in order to minimize particle-induced desorption coefficients. Cleaning mechanisms involve a mixture of sputtering and ion- (or neutral) induced desorption effects depending on the gas mixture (ArO/sub 2/ vs. H/sub 2/) and excitation method (DC, RF, and ECR). The author will review the methodology of glow discharge conditioning, diagnostic measurements provided by residual gas and surface composition analysis, and applications to vessel conditioning and materials processing. 76 refs., 16 figs.

  14. Enhanced Glow Discharge Production of Oxygen

    NASA Technical Reports Server (NTRS)

    Ash, Robert; Zhong, Shi

    1998-01-01

    Studies starting in late seventies have shown Mars atmosphere can be used as a feedstock for oxygen production using simple chemical processing systems during early phases of the Mars exploration program. This approach has been recognized as one of the most important in-situ resource utilization (ISRU) concepts for enabling future round trip Mars missions. It was determined a decade ago that separation of oxygen can be accomplished efficiently by permeation through a silver membrane at temperatures well below 1000 K. This process involves adsorption of atomic oxygen on the surface and its subsequent diffusion through a silver lattice via an oxygen concentration gradient. We have determined recently that glow discharge can be used to liberate atomic oxygen from Mars atmosphere and that the oxygen can be collected through a silver permeation membrane. Recently, we demonstrated a substantial increase in energy efficiency of the process by applying a radio frequency discharge in combination with a silver permeation membrane. The experiments were performed using pure carbon dioxide in the pressure range equal to Mars surface conditions. Energy efficiency was defined as the ratio of the energy required to dissociate a unit mass of oxygen from carbon dioxide to the (electrical) energy consumed by the overall system during the dissociation and collection process. The research effort, started at NASA Langley Research Center, continued with this project. Oxygen production apparatus, built and operated under the research grant NAG1-1140 was relocated to the Atomic Beams Laboratory at ODU in July 1996, being since then in fall operation.

  15. Simulation of nonstationary phenomena in atmospheric-pressure glow discharge

    NASA Astrophysics Data System (ADS)

    Korolev, Yu. D.; Frants, O. B.; Nekhoroshev, V. O.; Suslov, A. I.; Kas'yanov, V. S.; Shemyakin, I. A.; Bolotov, A. V.

    2016-06-01

    Nonstationary processes in atmospheric-pressure glow discharge manifest themselves in spontaneous transitions from the normal glow discharge into a spark. In the experiments, both so-called completed transitions in which a highly conductive constricted channel arises and incomplete transitions accompanied by the formation of a diffuse channel are observed. A model of the positive column of a discharge in air is elaborated that allows one to interpret specific features of the discharge both in the stationary stage and during its transition into a spark and makes it possible to calculate the characteristic oscillatory current waveforms for completed transitions into a spark and aperiodic ones for incomplete transitions. The calculated parameters of the positive column in the glow discharge mode agree well with experiment. Data on the densities of the most abundant species generated in the discharge (such as atomic oxygen, metastable nitrogen molecules, ozone, nitrogen oxides, and negative oxygen ions) are presented.

  16. Modelling of tokamak glow discharge cleaning II: comparison with experiment and application to ITER

    NASA Astrophysics Data System (ADS)

    Kogut, D.; Douai, D.; Hagelaar, G.; Pitts, R. A.

    2015-02-01

    The primary function of the ITER glow discharge cleaning (GDC) system will be the preparation of in-vessel component surfaces prior to the machine start-up. It may also contribute to tritium removal in the nuclear phase. In GDC, conditioning efficiency is strongly dependent on the homogeneity of the flux of ions impinging onto wall surfaces. In order to assess the wall particle flux distribution in ITER, a novel 2D multi-fluid model, described in a companion paper, has recently been developed and is benchmarked here against both experimental glow discharge data obtained in a small laboratory chamber with cylindrical geometry and from two large toroidal devices: the JET tokamak and the RFX reverse field pinch. In the laboratory plasma, simulated and measured plasma electron density and temperature are in a good agreement in the negative glow region, while discrepancies exist in the anode glow, where the fluid description of the model is inaccurate due to long mean free paths of electrons. Calculated and measured ion flux distribution profiles in RFX are found in good agreement, whereas in JET comparison it is more difficult, due to the complex geometry of the first wall which leads to local inhomogeneities in the measured flux. Simulations of H2-GDC for ITER with one or two anodes indicate fairly homogeneous plasma parameters and wall ion flux in the negative glow at 0.5 Pa, a commonly used gas pressure for GDC in existing fusion devices. Although the axisymmetric geometry in the model does not allow all seven ITER anodes to be powered simultaneously in the simulations, the results can be extrapolated to the full system and predict ion current densities on wall surfaces close to the simple expectation of total anode current divided by wall surface area (0.21 A m-2), which is relevant to GDC in JET and other machines.

  17. A low-power magnetic-field-assisted plasma jet generated by dielectric-barrier discharge enhanced direct-current glow discharge at atmospheric pressure

    SciTech Connect

    Jiang, Weiman; Tang, Jie Wang, Yishan; Zhao, Wei; Duan, Yixiang

    2014-01-06

    A magnetic field is introduced to the dielectric-barrier discharge enhanced direct-current glow discharge for efficient plasma generation, with the discharge power of 2.7 W and total energy consumption reduced to 34% of the original. By spatially examining the emission spectra and plasma temperature, it is found that their peaks shift from edges to the center and the negative and anode glows merge into the positive column and disappear, accompanied by improvement of uniformity and chemical activity of the enlarged plasma. This lies in the enhancement of ionization in the curved and lengthened electron path and the dispersion of discharge domains.

  18. Examination of interior surfaces using glow-discharge illumination

    DOEpatents

    Lord, David E.; Petrini, Richard R.; Carter, Gary W.

    1978-01-01

    Endoscopic examination of the interior of a hollow structure through a light pipe that is inserted into the structure, the interior being illuminated by means of a glow discharge that is established with a high voltage applied between the structure wall as one electrode and a second electrode that is inserted into the structure, or establishing the glow with two electrodes inserted into the structure.

  19. Sensitive glow discharge ion source for aerosol and gas analysis

    DOEpatents

    Reilly, Peter T. A.

    2007-08-14

    A high sensitivity glow discharge ion source system for analyzing particles includes an aerodynamic lens having a plurality of constrictions for receiving an aerosol including at least one analyte particle in a carrier gas and focusing the analyte particles into a collimated particle beam. A separator separates the carrier gas from the analyte particle beam, wherein the analyte particle beam or vapors derived from the analyte particle beam are selectively transmitted out of from the separator. A glow discharge ionization source includes a discharge chamber having an entrance orifice for receiving the analyte particle beam or analyte vapors, and a target electrode and discharge electrode therein. An electric field applied between the target electrode and discharge electrode generates an analyte ion stream from the analyte vapors, which is directed out of the discharge chamber through an exit orifice, such as to a mass spectrometer. High analyte sensitivity is obtained by pumping the discharge chamber exclusively through the exit orifice and the entrance orifice.

  20. Dust-void formation in a dc glow discharge.

    PubMed

    Fedoseev, A V; Sukhinin, G I; Dosbolayev, M K; Ramazanov, T S

    2015-08-01

    Experimental investigations of dusty plasma parameters of a dc glow discharge were performed in a vertically oriented discharge tube. Under certain conditions, dust-free regions (voids) were formed in the center of the dust particle clouds that levitated in the strong electric field of a stratified positive column. A model for radial distribution of dusty plasma parameters of a dc glow discharge in inert gases was developed. The behavior of void formation was investigated for different discharge conditions (type of gas, discharge pressure, and discharge current) and dust particle parameters (particle radii and particle total number). It was shown that it is the ion drag force radial component that leads to the formation of voids. Both experimental and calculated results show that the higher the discharge current the wider dust-free region (void). The calculations also show that more pronounced voids are formed for dust particles with larger radii and under lower gas pressures. PMID:26382534

  1. Experimental investigations of dust levitation in a DC glow discharge

    NASA Astrophysics Data System (ADS)

    Sheth, Niraj; Behrend, Christina; Jiang, Feng; Post-Zwicker, Andrew

    2003-10-01

    Dusty plasmas continue to be of considerable interest to both the astrophysical and plasma processing communities. We recently constructed a DC glow discharge source to investigate dust behavior and its effect on the plasma parameters. The system, roughly based upon one reported elsewhere(1) consists of a 4" stainless steel cross with two planar stainless steel electrodes. Both the anode and cathode are biased with respect to the chamber ground. Typical values are 100 V and -410 V, respectively with argon as the working gas and 1.5 cm electrode distance. The silica dust particles are 3 - 5 microns in diameter and rested on a stainless tray that could be electrically isolated, biased, or grounded. Clouds were observed by scattering light from a He-Ne laser into a CCD camera and the plasma diagnosed by a Langmuir probe. A variety of dust modes are observed, including dust acoustic and dust lattice modes. We report on our initial results investigating the charging of the dust grains and the sheath structure surrounding the dust cloud. (1)Thomas, E., Watson, M., Phys. Plasmas, 7, 3194 (2000)

  2. Extension of spatiotemporal chaos in glow discharge-semiconductor systems

    SciTech Connect

    Akhmet, Marat Fen, Mehmet Onur; Rafatov, Ismail

    2014-12-15

    Generation of chaos in response systems is discovered numerically through specially designed unidirectional coupling of two glow discharge-semiconductor systems. By utilizing the auxiliary system approach, [H. D. I. Abarbanel, N. F. Rulkov, and M. M. Sushchik, Phys. Rev. E 53, 4528–4535 (1996)] it is verified that the phenomenon is not a chaos synchronization. Simulations demonstrate various aspects of the chaos appearance in both drive and response systems. Chaotic control is through the external circuit equation and governs the electrical potential on the boundary. The expandability of the theory to collectives of glow discharge systems is discussed, and this increases the potential of applications of the results. Moreover, the research completes the previous discussion of the chaos appearance in a glow discharge-semiconductor system [D. D. Šijačić U. Ebert, and I. Rafatov, Phys. Rev. E 70, 056220 (2004).].

  3. Analysis Of The Different Zones Of Glow Discharge Of Ethyl Alcohol (C2H6O)

    NASA Astrophysics Data System (ADS)

    Torres, C.; Reyes, P. G.; Mulia, J.; Castillo, F.; Martínez, H.

    2014-05-01

    The aim of this work is to explore the emission spectroscopy of ethyl alcohol in some regions, also is determine the result elements of the glow discharge, the spectrums were observed in a range of 200 at 1100 nm in the different zones inside of the tube at different distances of 20 and 30 cm. The elements are: in anode region C6H5 (483.02nm), CHO (519.56nm) and H2 (560.47nm), in the positive column CO2+ (315.52 y 337.00nm), O+ (357.48nm), CH+ (380.61nm) and CO+ (399.73nm); in the cathode region we observed O+ (391.19nm), CHOCHO (428.00nm), CO+ (471.12nm) and H2 (656.52nm). C6H5, CHO y H2 species occurring in all regions analyzed varying the glow discharge emission intensity.

  4. Mechanism of boriding from pastes in a glow discharge

    SciTech Connect

    Isakov, S.A.; Al'tshuler, S.A.

    1987-09-01

    The authors investigate the boridation of steel 45 from the standpoint of the glow-discharge dissociation of a borax paste and the plasma arc spraying of the resulting boron into the steel. The effects of process parameters on the impregnation of boron into the steel and its phase behavior in the boridation process are discussed.

  5. Metal Mesh Smear Sampling for Glow Discharge Analytical Spectroscopy

    SciTech Connect

    Shaw, R.W.; Barshick, C.M.; Ramsey, J.M.; Smith, D.H.

    2000-06-01

    Metal mesh smear sampling is being developed and evaluated for use in a number of glow discharge and other optical and mass spectrometric techniques. Sensitive elemental and isotopic analyses thus will be coupled with a convenient sampling scheme similar to one that is common for radiological surveys.

  6. Degradation of Organics in a Glow Discharge Under Martian Conditions

    NASA Technical Reports Server (NTRS)

    Hintze, P. E.; Calle, L. M.; Calle, C. I.; Buhler, C. R.; Trigwell, S.; Starnes, J. W.; Schuerger, A. C.

    2006-01-01

    The primary objective of this project is to understand the consequences of glow electrical discharges on the chemistry and biology of Mars. The possibility was raised some time ago that the absence of organic material and carbonaceous matter in the Martian soil samples studied by the VikinG Landers might be due in part to an intrinsic atmospheric mechanism such as glow discharge. The high probability for dust interactions during Martian dust storms and dust devils, combined with the cold, dry climate of Mars most likely results in airborne dust that is highly charged. Such high electrostatic potentials generated during dust storms on Earth are not permitted in the low-pressure CO2 environment on Mars; therefore electrostatic energy released in the form of glow discharges is a highly likely phenomenon. Since glow discharge methods are used for cleaning and sterilizing surfaces throughout industry, the idea that dust in the Martian atmosphere undergoes a cleaning action many times over geologic time scales appears to be a plausible one.

  7. Synchronization between two coupled direct current glow discharge plasma sources

    SciTech Connect

    Chaubey, Neeraj; Mukherjee, S.; Sen, A.; Sekar Iyengar, A. N.

    2015-02-15

    Experimental results on the nonlinear dynamics of two coupled glow discharge plasma sources are presented. A variety of nonlinear phenomena including frequency synchronization and frequency pulling are observed as the coupling strength is varied. Numerical solutions of a model representation of the experiment consisting of two coupled asymmetric Van der Pol type equations are found to be in good agreement with the observed results.

  8. Effect of glow discharge air plasma on grain crops seed

    SciTech Connect

    Dubinov, A.E.; Lazarenko, E.M.; Selemir, V.D.

    2000-02-01

    Oat and barley seeds have been exposed to both continuous and pulsed glow discharge plasmas in air to investigate the effects on germination and sprout growth. Statistical analysis was used to evaluate the effect of plasma exposure on the percentage germination and length of sprout growth. A stimulating effect of plasma exposure was found together with a strong dependence on whether continuous or pulsed discharges were used.

  9. Dual-frequency glow discharges in atmospheric helium

    SciTech Connect

    Huang, Xiaojiang; Guo, Ying; Dai, Lu; Zhang, Jing; Shi, J. J.

    2015-10-15

    In this paper, the dual-frequency (DF) glow discharges in atmospheric helium were experimented by electrical and optical measurements in terms of current voltage characteristics and optical emission intensity. It is shown that the waveforms of applied voltages or discharge currents are the results of low frequency (LF) waveforms added to high frequency (HF) waveforms. The HF mainly influences discharge currents, and the LF mainly influences applied voltages. The gas temperatures of DF discharges are mainly affected by HF power rather than LF power.

  10. The Influence of Polymer Film on an Atmospheric Pressure Glow Discharge in Helium*

    NASA Astrophysics Data System (ADS)

    Nersisyan, Gagik; Graham, William

    2004-09-01

    Atmospheric pressure glow discharges (APGD) have potential in polymer surface modification. Here the affect of low density polyethylene (LDPE) film, placed on the electrodes and in the inter-electrode gap, on the development and the uniformity of pulsed APGDs in helium has been studied using short exposure time images and emission spectroscopy of the gap. The APGD was generated between two parallel, glass-ceramic plates, covering metallic mesh electrodes driven by a sinusoidal (5 kV peak to peak) voltage at a frequency of 30 kHz. The build-up of the APGD started from a weak luminous region near the anode followed by the formation of a bright negative glow. When the film was tightly pressed to one of the dielectric plates the intensity of the negative glow decreased and after about 5 minutes the discharge became spatially non-uniform. When the film was stretched through the middle of the gap, it behaved like a dielectric barrier splitting the gap into two APGD regions i.e. with a negative glow on both sides. The affect of the film on the emission spectroscopy and on the electric characteristics will be discussed.

  11. Glow discharge electron impact ionization source for miniature mass spectrometers.

    PubMed

    Gao, Liang; Song, Qingyu; Noll, Robert J; Duncan, Jason; Cooks, R Graham; Ouyang, Zheng

    2007-05-01

    A glow discharge electron impact ionization (GDEI) source was developed for operation using air as the support gas. An alternative to the use of thermoemission from a resistively heated filament electron source for miniature mass spectrometers, the GDEI source is shown to have advantages of long lifetime under high-pressure operation and low power consumption. The GDEI source was characterized using our laboratory's handheld mass spectrometer, the Mini 10. The effects of the discharge voltage and pressure were investigated. Design considerations are illustrated with calculations. Performance is demonstrated in a set of experimental tests. The results show that the low power requirements, mechanical ruggedness, and quality of the data produced using the small glow discharge ion source make it well-suited for use with a portable handheld mass spectrometer. PMID:17441220

  12. Experimental studies of anode sheath phenomena in a Hall thruster discharge

    SciTech Connect

    Dorf, L.; Raitses, Y.; Fisch, N.J.

    2005-05-15

    Both electron-repelling and electron-attracting anode sheaths in a Hall thruster were characterized by measuring the plasma potential with biased and emissive probes [L. Dorf, Y. Raitses, V. Semenov, and N. J. Fisch, Appl. Phys. Lett. 84, 1070 (2004)]. In the present work, two-dimensional structures of the plasma potential, electron temperature, and plasma density in the near-anode region of a Hall thruster with clean and dielectrically coated anodes are identified. Possible mechanisms of anode sheath formation in a Hall thruster are analyzed. The path for current closure to the anode appears to be the determining factor in the anode sheath formation process. The main conclusion of this work is that the anode sheath formation in Hall thrusters differs essentially from that in the other gas discharge devices, such as a glow discharge or a hollow anode, because the Hall thruster utilizes long electron residence times to ionize rather than high neutral pressures.

  13. Experimental Studies of Anode Sheath Phenomena in a Hall Thruster Discharge

    SciTech Connect

    L. Dorf; Y. Raitses; N.J. Fisch

    2004-12-17

    Both electron-repelling and electron-attracting anode sheaths in a Hall thruster were characterized by measuring the plasma potential with biased and emissive probes [L. Dorf, Y. Raitses, V. Semenov, and N.J. Fisch, Appl. Phys. Let. 84 (2004) 1070]. In the present work, two-dimensional structures of the plasma potential, electron temperature, and plasma density in the near-anode region of a Hall thruster with clean and dielectrically coated anodes are identified. Possible mechanisms of anode sheath formation in a Hall thruster are analyzed. The path for current closure to the anode appears to be the determining factor in the anode sheath formation process. The main conclusion of this work is that the anode sheath formation in Hall thrusters differs essentially from that in the other gas discharge devices, like a glow discharge or a hollow anode, because the Hall thruster utilizes long electron residence times to ionize rather than high neutral pressures.

  14. Experimental studies of anode sheath phenomena in a Hall thruster discharge

    NASA Astrophysics Data System (ADS)

    Dorf, L.; Raitses, Y.; Fisch, N. J.

    2005-05-01

    Both electron-repelling and electron-attracting anode sheaths in a Hall thruster were characterized by measuring the plasma potential with biased and emissive probes [L. Dorf, Y. Raitses, V. Semenov, and N. J. Fisch, Appl. Phys. Lett. 84, 1070 (2004)]. In the present work, two-dimensional structures of the plasma potential, electron temperature, and plasma density in the near-anode region of a Hall thruster with clean and dielectrically coated anodes are identified. Possible mechanisms of anode sheath formation in a Hall thruster are analyzed. The path for current closure to the anode appears to be the determining factor in the anode sheath formation process. The main conclusion of this work is that the anode sheath formation in Hall thrusters differs essentially from that in the other gas discharge devices, such as a glow discharge or a hollow anode, because the Hall thruster utilizes long electron residence times to ionize rather than high neutral pressures.

  15. Plasma mixing glow discharge device for analytical applications

    DOEpatents

    Pinnaduwage, L.A.

    1999-04-20

    An instrument for analyzing a sample has an enclosure that forms a chamber containing an anode which divides the chamber into a discharge region and an analysis region. A gas inlet and outlet are provided to introduce and exhaust a rare gas into the discharge region. A cathode within the discharge region has a plurality of pins projecting in a geometric pattern toward the anode for exciting the gas and producing a plasma discharge between the cathode and the anode. Low energy electrons (e.g. <0.5 eV) pass into the analysis region through an aperture. The sample to be analyzed is placed into the analysis region and bombarded by the metastable rare gas atoms and the low energy electrons extracted into from the discharge region. A mass or optical spectrometer can be coupled to a port of the analysis region to analyze the resulting ions and light emission. 3 figs.

  16. Plasma mixing glow discharge device for analytical applications

    DOEpatents

    Pinnaduwage, Lal A.

    1999-01-01

    An instrument for analyzing a sample has an enclosure that forms a chamber containing an anode which divides the chamber into a discharge region and an analysis region. A gas inlet and outlet are provided to introduce and exhaust a rare gas into the discharge region. A cathode within the discharge region has a plurality of pins projecting in a geometric pattern toward the anode for exciting the gas and producing a plasma discharge between the cathode and the anode. Low energy electrons (e.g. <0.5 eV) pass into the analysis region through an aperture. The sample to be analyzed is placed into the analysis region and bombarded by the metastable rare gas atoms and the low energy electrons extracted into from the discharge region. A mass or optical spectrometer can be coupled to a port of the analysis region to analyze the resulting ions and light emission.

  17. Radiation effects on ETFE polymer exposed to glow discharge

    NASA Astrophysics Data System (ADS)

    Minamisawa, Renato Amaral; Abidzina, Volha; de Almeida, Adelaide; Budak, Satilmis; Tereshko, I.; Elkin, I.; Ila, Daryush

    2007-08-01

    The polymer ethylenetetrafluoroethylene (ETFE) is composed of alternating ethylene and tetrafluoroethylene segments. Because it has applications in areas such as medical physics and industrial coatings, there is a great interest in surface modification studies of ETFE polymer. When this material is exposed to ionizing radiation it suffers damage that depends on the type, energy and intensity of the irradiation. In order to determine the radiation damage mechanism from exposure to low voltage plasma, ETFE films were exposed to residual gas plasma in glow discharge regime to a fluence of 2 × 1017 ions/cm2. Irradiated films were analyzed with optical absorption photospectrometry, Fourier transform infrared (FTIR) and Raman spectroscopy to determine the chemical nature of the structural changes caused by low energy glow discharge.

  18. Glow Discharge Induced Hydroxyl Radical Degradation of 2-Naphthylamine

    NASA Astrophysics Data System (ADS)

    Lu, Quanfang; Yu, Jie; Gao, Jinzhang; Yang, Wu

    2005-06-01

    In an aqueous solution, normal electrolysis at high voltages switches over spontaneously to glow discharge electrolysis and gives rise to hydroxyl radical, hydrogen peroxide, and aqueous electron, as well as several other active species. Hydroxyl radical directly attacks organic contaminants to make them oxidized. In the present paper, 2-naphthylamine is eventually degraded into hydrogen carbonate and carbon dioxide. The degradation process is analyzed by using an Ultraviolet (UV) absorption spectrum, high-performance liquid chromatography (HPLC) and chemical oxygen demand (COD). It is demonstrated that 2-naphthylamine (c0 =30 mg·l-1) is completely converted within 2h at 30°C and 600 V by glow discharge electrolysis, and the degradation is strongly dependent upon the presence of ferrous ions. COD is ascended in the absence of ferrous ions and descended in the presence of them.

  19. The Use of DC Glow Discharges as Undergraduate Educational Tools

    SciTech Connect

    Stephanie A. Wissel and Andrew Zwicker, Jerry Ross, and Sophia Gershman

    2012-10-09

    Plasmas have a beguiling way of getting students excited and interested in physics. We argue that plasmas can and should be incorporated into the undergraduate curriculum as both demonstrations and advanced investigations of electromagnetism and quantum effects. Our device, based on a direct current (DC) glow discharge tube, allows for a number of experiments into topics such as electrical breakdown, spectroscopy, magnetism, and electron temperature.

  20. Plasma kinetics of ethanol conversion in a glow discharge

    NASA Astrophysics Data System (ADS)

    Levko, D. S.; Tsymbalyuk, A. N.; Shchedrin, A. I.

    2012-11-01

    The mechanism of ethanol conversion in a nonequilibrium glow discharge has been studied. It is shown that molecular hydrogen is produced in reactions between ethanol molecules and hydrogen atoms in the initial stage and in reactions involving active H, CH2OH, CH3CHOH, and formaldehyde in the final stage. Comparison with experimental data shows that the kinetic mechanism used in these calculations correctly predicts the concentrations of the main components of the gas mixture.

  1. Physics and chemistry in glow dielectric barrier discharges

    NASA Astrophysics Data System (ADS)

    Massines, Françoise

    2001-10-01

    Atmospheric pressure glow discharge (APGD) are of great interest for application in gas chemistry, sterilization, surface activation or thin film deposition. But the development of a new process based on this discharge needs a clear understanding of the discharge physics and chemistry. The aim of this work is to contribute to that goal. One difficulty is the large variety of discharges called APGD. Then the first point of this talk will consist on a quick description of the different APGD families. This overview will be limited to dielectric barrier glow discharges. Then, we will focussed on those due to a Townsend breakdown. The analysis of their working domain in helium and in nitrogen shows that a lot of seed electrons are necessary to turn on the discharge through a Townsend breakdown. The main mechanism leading to these seed electrons depends (i) on the life time of the gas metastables compared to the delay between two consecutive discharges (ii) on the maximum ionisation level which can be reached without transition to FD. In helium, the origin of the seed electrons is mainly the electrons created by direct ionisation and Penning ionisation during a discharge or at the end of it, trapped in the positive column and still present in the gas when the following discharge is turned on. In nitrogen, the seed electrons are created by Penning ionisation just before the breakdown. Then in helium, the time between two discharges has to be short enough and a positive column is necessary as well as the presence of helium metastables. In N2, metastable density just before the breakdown is a dominant parameter. Moreover, the density of N2 molecules and then the gas temperature, is also important in order to maintain a large contribution of Penning ionisation compared to direct electronic ionisation. In all the gases, the metastables control the discharge development and then play an important role in the gas chemistry.

  2. Development of blood compatible materials by glow discharge-treatment

    NASA Astrophysics Data System (ADS)

    Ishikawa, Y.; Sasakawa, S.

    Glow discharge-treatment was applied to preparation of blood compatible materials. Plasticized polyvinylchloride (PVC) which is used for blood bags was treated in the presence of various gases or monomers. Wettability of PVC was modified by the treatment over a wide range. And leakage of plasticizer, di-(2-ethylhexyl)phthalate (DEHP), was prevented. When platelet concentrates were stored in the treated PVC bags, impairment of platelet functions was suppressed by the prevention of DEHP leakage. But platelet adhesion to the surfaces increased by the treatments. Aldehyde groups were grafted on polyethylene film (PE) by glow discharge-treatment in the presence of formaldehyde gas. Although the aldehyde-grafted PE (HCHO-PE) had higher reactivity with platelet than PE after albumin coating, it exhibited excellent antithrombogenicity after blood plasma coating. HCHO-PE adsorbed proteins with almost the same composition as blood plasma, although non-treated PE adsorbed proteins with higher fibinogen/albumin ratio. Segmented-polyurethane which is well known to exhibit good antithrombogenicity, also formed the adsorption layer having composition like that of blood plasma. These results suggest that protein layer adsorbed with blood plasma composition is hardly recognized by platelets. Glow discharge-treatment is a simple and effective method for surface modification of medical polymers.

  3. Glow discharge optical emission of plutonium and plutonium waste

    SciTech Connect

    Marcus, R.K.; Spencer, W.A.

    1995-11-09

    The application of glow discharges to the analysis of nonconducting materials such as glasses and ceramics is of great interest due to the number of advantages afforded by their direct solids capabilities. These types of samples, by their chemical nature, pose difficulties in dissolution for their subsequent analysis by common spectroscopic instrumental methods such as inductively coupled plasma atomic emission (ICP-AES). The ability of the glow discharge to sputter-atomize and excite solid nonconducting materials greatly reduces sample preparation time, cost, and complexity of an analysis. In comparison with x-ray spectroscopies, GD also provides the advantage of a relatively uniform sample atomization rate, resulting in a lowering of matrix effects. In a traditional direct current glow discharge (dc-GD), the material to be analyzed must first be ground and thoroughly mixed with a conductive host matrix and pressed into a solid pellet. Additionally, atmospheric gases which are often trapped in the sample upon pressing can degrade the quality of the plasma and obscure analytical results by reducing sputtering rates and affecting excitation conditions. Internal standardization has been carried out in both atomic absorption and emission dc-GD analyses in order to improve precision and accuracy which are affected by these problems.

  4. Interaction of a surface glow discharge with a gas flow

    SciTech Connect

    Aleksandrov, A. L. Schweigert, I. V.

    2010-05-15

    A surface glow discharge in a gas flow is of particular interest as a possible tool for controlling the flow past hypersonic aircrafts. Using a hydrodynamic model of glow discharge, two-dimensional calculations for a kilovolt surface discharge in nitrogen at a pressure of 0.5 Torr are carried out in a stationary gas, as well as in a flow with a velocity of 1000 m/s. The discharge structure and plasma parameters are investigated near a charged electrode. It is shown that the electron energy in a cathode layer reaches 250-300 eV. Discharge is sustained by secondary electron emission. The influence of a high-speed gas flow on the discharge is considered. It is shown that the cathode layer configuration is flow-resistant. The distributions of the electric field and electron energy, as well as the ionization rate profile in the cathode layer, do not change qualitatively under the action of the flow. The basic effect of the flow's influence is a sharp decrease in the region of the quasineutral plasma surrounding the cathode layer due to fast convective transport of ions.

  5. Similarities and differences between gliding glow and gliding arc discharges

    NASA Astrophysics Data System (ADS)

    Kolev, St.; Bogaerts, A.

    2015-12-01

    In this work we have analyzed the properties of a gliding dc discharge in argon at atmospheric pressure. Despite the usual designation of these discharges as ‘gliding arc discharges’, it was found previously that they operate in two different regimes—glow and arc. Here we analyze the differences in both regimes by means of two dimensional fluid modeling. In order to address different aspects of the discharge operation, we use two models—Cartesian and axisymmetric in a cylindrical coordinate system. The obtained results show that the two types of discharges produce a similar plasma column for a similar discharge current. However, the different mechanisms of plasma channel attachment to the cathode could produce certain differences in the plasma parameters (i.e. arc elongation), and this can affect gas treatments applications.

  6. Study of nonlinear oscillations in a glow discharge plasma using empirical mode decomposition and Hilbert Huang transform

    SciTech Connect

    Wharton, A. M.; Sekar Iyengar, A. N.; Janaki, M. S.

    2013-02-15

    Hilbert Huang transform (HHT) based time series analysis was carried out on nonlinear floating potential fluctuations obtained from hollow cathode glow discharge plasma in the presence of anode glow. HHT was used to obtain contour plots and the presence of nonlinearity was studied. Frequency shift with time, which is a typical nonlinear behaviour, was detected from the contour plots. Various plasma parameters were measured and the concepts of correlation coefficients and the physical contribution of each intrinsic mode function have been discussed. Physically important quantities such as instantaneous energy and their uses in studying physical phenomena such as intermittency and non-stationary data have also been discussed.

  7. The One Atmosphere Glow Discharge in Air: Phenomenology and Applications

    NASA Astrophysics Data System (ADS)

    Ben Gadri, Rami; Sherman, Daniel M.; Chen, Zhiyu; Karakaya, Fuat; Reece Roth, J.

    1999-10-01

    The existence of an atmospheric pressure RF glow plasma with the characteristics of a classical low pressure DC glow discharge has been experimentally and theoretically demonstrated [1, 2]. At the UTK Plasma Sciences Laboratory, the One Atmosphere Uniform Glow Discharge Plasma (OAUGDP) in air has been applied to a wide range of plasma processing applications. The technology is simple, technically attractive, and suitable for online treatment of webs and 3-dimensional workpieces. A parallel plate reactor and a Remote Exposure Reactor (RER) have been developed for direct plasma immersion and remote exposure, respectively. The RER is based on generating active species capable of sterilization and surface treatment in a uniform surface layer of the OAUGDP on planar panels [3], and convecting the active species to a remote chamber where the workpiece is located. A related surface plasma has been developed for indoor air filtration systems. In addition, the surface plasma on flat panels modified the boundary layer in wind tunnel tests to produce electrohydrodynamic (EHD) flow effects that can be used to increase or decrease aerodynamic drag [3]. [1] Massines et al., J. Appl. Phys., Vol. 83, N 6, pp 2950-2957, Mar. 1998. [2] J. R. Roth, "Industrial Plasma Engineering" Vol. I: Principles. Inst. Phys. Pub., Bristol and philadelphia, ISBN 0-7503-0318-2, 1995. [3] Roth et al., AIAA Paper 98-0328, 36th AIAA Meeting, Reno NV, 1998, Jan. 12-15.

  8. Ozone generation using atmospheric pressure glow discharge in air

    NASA Astrophysics Data System (ADS)

    Buntat, Z.; Smith, I. R.; Razali, N. A. M.

    2009-12-01

    This paper presents results from a study into the generation of ozone by a stable atmospheric glow discharge, using dry air as the feeding gas for ozone generation. The power supply is 50 Hz ac, with the use of a perforated aluminium sheet for the electrodes and soda lime glass as a dielectric layer in a parallel-plate configuration, stabilizing the generation process and enabling ozone to be produced. The stable glow discharge spreads uniformly at a gas breakdown voltage below 4.8 kV and requires only 330 mW discharge power, with a limitation of 3 mm on the maximum gap spacing for the dry air. With the technique providing a high collision rate between the electrons and gas molecules during the discharge process, a high ozone yield is obtained. An analysis of the effect on the production rate of parameters such as the input voltage, gas flow rate and reaction chamber dimensions resulted in a highest efficiency of production of almost 350 g kWh-1 and confirms its potential as an important ozone generation technology.

  9. On electron bunching and stratification of glow discharges

    SciTech Connect

    Golubovskii, Yuri B.; Kolobov, Vladimir I.; Nekuchaev, Vladimir O.

    2013-10-15

    Plasma stratification and excitation of ionization waves is one of the fundamental problems in gas discharge physics. Significant progress in this field is associated with the name of Lev Tsendin. He advocated the need for the kinetic approach to this problem contrary to the traditional hydrodynamic approach, introduced the idea of electron bunching in spatially periodic electric fields, and developed a theory of kinetic resonances for analysis of moving striations in rare gases. The present paper shows how Tsendin's ideas have been further developed and applied for understanding the nature of the well-known S-, P-, and R-striations observed in glow discharges of inert gases at low pressures and currents. We review numerical solutions of a Fokker-Planck kinetic equation in spatially periodic electric fields under the effects of elastic and inelastic collisions of electrons with atoms. We illustrate the formation of kinetic resonances at specific field periods for different shapes of injected Electron Distribution Functions (EDF). Computer simulations illustrate how self-organization of the EDFs occurs under nonlocal conditions and how Gaussian-like peaks moving along resonance trajectories are formed in a certain range of discharge conditions. The calculated EDFs agree well with the experimentally measured EDFs for the S, P, and R striations in noble gases. We discuss how kinetic resonances affect dispersion characteristics of moving striations and mention some non-linear effects associated with glow discharge stratification. We propose further studies of stratification phenomena combining physical kinetics and non-linear physics.

  10. Characteristics of a glow discharge maintained in the vapors of a liquid

    NASA Astrophysics Data System (ADS)

    Ramazanov, A. N.; Kostrin, D. K.; Goncharov, V. D.; Lisenkov, A. A.

    2016-07-01

    Glow discharge in atmospheric pressure air in the discharge cell with a liquid cathode is considered. Current-voltage characteristic of such a system at different distances between the electrodes and various electrode placements, different thickness of the liquid layer and the cathode surface area are shown. Spectral emission of the glow discharge plasma in the vapors of a liquid is demonstrated.

  11. The Effect of Anode Material and Secondary Gas Injection on Self-organized Patterns in Atmospheric Pressure Glows

    NASA Astrophysics Data System (ADS)

    Kovach, Yao; Foster, John

    2015-09-01

    Plasma self-organization on anode surfaces in DC glow discharges remains poorly understood. This effort aims to elucidate the nature of self-organization through the study of resulting patterns on both liquid and metal electrode surfaces. Self-organization pattern formation and behavior were studied as a function of inter-electrode spacing, electrode material type, gas composition and gas flow rate using emission spectroscopy and fast camera imaging. The response of the patterns to variation in these parameters is reported. These results are used as a basis for speculating upon the underlying physical processes that give rise to the self-organization. NSF CBET 1336375.

  12. Electrical properties of pulsed glow discharge Two new aspects

    NASA Astrophysics Data System (ADS)

    Efimova, V. V.; Voronov, M. V.; Hoffmann, V.; Eckert, J.

    2008-07-01

    At the application of pulsed glow discharge (PGD) a transient power of several kW can be reached. This leads to a significant increase of the excitation and ionization efficiency of the sputtered sample atoms. Moreover, with pulsed mode temporally resolved optical emission spectrometry (OES) and mass spectrometry (MS) deliver additional information about the chemical bonds (Harrison 1998, Bengtson et al. 2000, Hang et al. 1996, Klingler et al. 1990, Lewis et al. 2001, Jackson and King 2003). However, the practical application of pulsed glow discharge (PGD) requires an understanding of the processes taking place in the pulsed system. There are some publications, where attention was paid on the voltage current characteristics and the current signal shape of PGD (King and Pan 1993, Lewis et al. 2003). Nevertheless more attention should be paid on the electrical properties of the PGD. In this work the shapes of current, voltage and emission intensity signals, obtained with two different pulse generators are compared. For better understanding of processes, taking place in the discharge the knowledge of the gas temperature is very important. Several authors have mentioned that heating of the cathode leads to changes of the voltage current curve, mainly a decrease of the current at the same voltage. This can be explained by a lower gas density at the same pressure but at higher temperatures (Chenlong et al. 1999, Tian and Chu 2001, Kasik et al. 2002). This phenomenon gives an approach to estimate the gas temperature of the plasma.

  13. Glow discharge assisted oxynitriding process of titanium for medical application

    NASA Astrophysics Data System (ADS)

    Wierzchoń, Tadeusz; Czarnowska, Elżbieta; Grzonka, Justyna; Sowińska, Agnieszka; Tarnowski, Michał; Kamiński, Janusz; Kulikowski, Krzysztof; Borowski, Tomasz; Kurzydłowski, Krzysztof J.

    2015-04-01

    The plasma oxynitriding process is a prospective method of producing titanium oxides as an integral part of a diffusive nitrided surface layer on titanium implants. This hybrid process, which combines glow discharge assisted nitriding and oxidizing, permits producing TiO2 + Ti2N + αTi(N)-type diffusive surface layers. The oxynitrided surface layers improve the corrosion and wear resistance of the substrate material. Additionally, the nanocrystalline titanium oxide TiO2 (rutile) improves the biological properties of titanium and its alloys when in contact with blood, whereas the TiN + Ti2N + αTi(N) zone eliminates the effect of metalosis.

  14. Glow discharge lamp: A light source for optical emission spectroscopy

    NASA Astrophysics Data System (ADS)

    Vishwanathan, K. S.; Srinivasan, V.; Nalini, S.; Mahalingam, T. R.

    A glow discharge lamp based on a modified version of the Grimm design has been fabricated. Its utility as a radiation source for optical emission spectrography by standardizing a method for the analysis of low alloy steels using a set of certified standards from DMRL, Hyderabad, has been demonstrated. A model has been proposed where the sputtering rates of different metals have been correlated with their heats of sublimation, metallic radii, and densities. Sputtering rates of ten different metals obtained from literature have been used to test this model, and the correlation appears to be excellent.

  15. Comparative Spectroscopic Temperature Measurements In Hydrogen Hollow Cathode Glow Discharge

    NASA Astrophysics Data System (ADS)

    Majstorovic, G. Lj.; Šišovic, N. M.; Konjevic, N.

    2010-07-01

    We report results of optical emission spectroscopy measurements of rotational Trot and translational temperature Ttr of hydrogen molecules. The light source was hollow cathode glow discharge with titanium cathode operated in hydrogen at low pressure. The rotational temperature of excited electronic states of H2 was determined either from relative line intensities of the R branch of the GK ? B band or from the Q branch of the Fulcher-a diagonal band. The population of excited energy levels, determined from relative line intensities, was used to derive ro-vibronic temperature of the ground state of hydrogen molecule.

  16. Diode laser excited optogalvanic spectroscopy of glow discharges

    SciTech Connect

    Barshick, C.M.; Shaw, R.W.; Post-Zwicker, A., Young, J.P.; Ramsey, J.M.

    1996-10-01

    The development of diode-laser-excited isotopically-selective optogalvanic spectroscopy (OGS) of uranium metal, oxide and fluoride in a glow discharge (GD) is presented. The technique is useful for determining isotopic ratios of {sup 235}U/({sup 235}U + {sup 238}U) in the above samples. The precision and accuracy of this determination is evaluated, and a study of experimental parameters pertaining to optimization of he measurement is discussed. Application of the GD-OGS to other f-transition elements is also described.

  17. Reproducing continuous radio blackout using glow discharge plasma

    SciTech Connect

    Xie, Kai; Li, Xiaoping; Liu, Donglin; Shao, Mingxu; Zhang, Hanlu

    2013-10-15

    A novel plasma generator is described that offers large-scale, continuous, non-magnetized plasma with a 30-cm-diameter hollow structure, which provides a path for an electromagnetic wave. The plasma is excited by a low-pressure glow discharge, with varying electron densities ranging from 10{sup 9} to 2.5 × 10{sup 11} cm{sup −3}. An electromagnetic wave propagation experiment reproduced a continuous radio blackout in UHF-, L-, and S-bands. The results are consistent with theoretical expectations. The proposed method is suitable in simulating a plasma sheath, and in researching communications, navigation, electromagnetic mitigations, and antenna compensation in plasma sheaths.

  18. Radial Distributions of Dusty Plasma Parameters in a Glow Discharge

    SciTech Connect

    Fedoseev, A. V.; Sukhinin, G. I.

    2011-11-29

    A self-consistent model for radial distributions of dusty plasma parameters in a DC glow discharge based on the non-local Boltzmann equation for EEDF, the drift-diffusion equation for ions, and the Poisson equation for self-consistent electric field is presented. The results show that for the case of high dust particles density when the recombination of electrons and ions exceeds the ionization near the tube axis, radial electron and ion fluxes change their direction toward the center of the tube, and the radial electric field is reversed.

  19. Inception of Snapover and Gas Induced Glow Discharges

    NASA Technical Reports Server (NTRS)

    Galofaro, J. T.; Vayner, B. V.; Degroot, W. A.; Ferguson, D. C.; Thomson, C. D.; Dennison, J. R.; Davies, R. E.

    2000-01-01

    Ground based experiments of the snapover phenomenon were conducted in the large vertical simulation chamber at the Glenn Research Center (GRC) Plasma Interaction Facility (PIF). Two Penning sources provided both argon and xenon plasmas for the experiments. The sources were used to simulate a variety of ionospheric densities pertaining to a spacecraft in a Low Earth Orbital (LEO) environment. Secondary electron emission is believed responsible for dielectric surface charging, and all subsequent snapover phenomena observed. Voltage sweeps of conductor potentials versus collected current were recorded in order to examine the specific charging history of each sample. The average time constant for sample charging was estimated between 25 and 50 seconds for all samples. It appears that current drops off by approximately a factor of 3 over the charging time of the sample. All samples charged in the forward and reverse bias directions, demonstrated hysteresis. Current jumps were only observed in the forward or positive swept voltage direction. There is large dispersion in tile critical snapover potential when repeating sweeps on any one sample. The current ratio for the first snapover region jumps between 2 and 4.6 times, with a standard deviation less than 1.6. Two of the samples showed even larger current ratios. It is believed the second large snapover region is due to sample outgassing. Under certain preset conditions, namely at the higher neutral gas background pressures, a perceptible blue-green glow was observed around the conductor. The glow is believed to be a result of secondary electrons undergoing collisions with an expelled tenuous cloud of gas, that is outgassed from the sample. Spectroscopic measurements of the glow discharge were made in an attempt to identify specific lines contributing to the observed glow.

  20. Demonstration of Separation Control Using Glow-Discharge Plasma Actuators

    NASA Technical Reports Server (NTRS)

    Hultgren, Lennart S.; Ashpis, David E.

    2003-01-01

    Active flow control of boundary-layer separation using glow-discharge plasma actuators is studied experimentally. Separation is induced on a flat plate installed in a closed-circuit wind tunnel by a shaped insert on the opposite wall. The flow conditions represent flow over the suction surface of a modem low-pressure-turbine airfoil. The Reynolds number, based on wetted plate length and nominal exit velocity, is varied from 50,000 to 300,000, covering cruise to takeoff conditions. Low (0.2%) and high (2.5%) free-stream turbulence intensities are set using passive grids. A spanwise-oriented phased-plasma-array actuator, fabricated on a printed circuit board, is surface-flush-mounted upstream of the separation point and can provide forcing in a wide frequency range. Static surface pressure measurements and hot-wire anemometry of the base and controlled flows are performed and indicate that the glow-discharge plasma actuator is an effective device for separation control.

  1. Demonstration of Separation Delay with Glow-Discharge Plasma Actuators

    NASA Technical Reports Server (NTRS)

    Hultgren, Lennart S.; Ashpis, David E.

    2004-01-01

    Active flow control of boundary-layer separation using glow-discharge plasma actuators is studied experimentally. Separation is induced on a flat plate installed in a closed-circuit wind tunnel by a shaped insert on the opposite wall. The flow conditions represent flow over the suction surface of a modern low-pressure-turbine airfoil. The Reynolds number, based on wetted plate length and nominal exit velocity, is varied from 50,000 to 300,000, covering cruise to takeoff conditions. Low (0.2 percent) and high (2.5 percent) free-stream turbulence intensities are set using passive grids. A spanwise-oriented phased-plasma-array actuator, fabricated on a printed circuit board, is surface-flush-mounted upstream of the separation point and can provide forcing in a wide frequency range. Static surface pressure measurements and hot-wire anemometry of the base and controlled flows are performed and indicate that the glow-discharge plasma actuator is an effective device for separation control.

  2. Glow discharge deposition at high rates using disilane

    SciTech Connect

    Rajeswaran, G.; Corderman, R.R.; Kampas, F.J.; Vanier, P.E.

    1985-01-01

    The research program reported makes use of the fact that amorphous silicon films can be grown faster from disilane in a glow discharge than from the traditional silane. The goal is to find a method to grow films at a high rate and with sufficiently high quality to be used in an efficient solar cell. It must also be demonstrated that the appropriate device structure can be successfully fabricated under conditions which give high deposition rates. High quality intrinsic films have been deposited at 20 A/s. Efficiency of 5.6% on steel substrates and 5.3% on glass substrates were achieved using disilane i-layers deposited at 15 A/s in a basic structure, without wide-gap doped layers or light trapping. Wide gap p-layers were deposited using disilane. Results were compared with those obtained at Vactronic using high power discharges of silane-hydrogen mixtures. (LEW)

  3. Flush-mounted probe diagnostics for argon glow discharge plasma

    SciTech Connect

    Xu, Liang Cao, Jinxiang; Liu, Yu; Wang, Jian; Du, Yinchang; Zheng, Zhe; Zhang, Xiao; Wang, Pi; Zhang, Jin; Li, Xiao; Qin, Yongqiang; Zhao, Liang

    2014-09-15

    A comparison is made between plasma parameters measured by a flush-mounted probe (FP) and a cylindrical probe (CP) in argon glow discharge plasma. Parameters compared include the space potential, the plasma density, and the effective electron temperature. It is found that the ion density determined by the FP agrees well with the electron density determined by the CP in the quasi-neutral plasma to better than 10%. Moreover, the space potential and effective electron temperature calculated from electron energy distribution function measured by the FP is consistent with that measured by the CP over the operated discharge current and pressure ranges. These results present the FP can be used as a reliable diagnostic tool in the stable laboratory plasma and also be anticipated to be applied in other complicated plasmas, such as tokamaks, the region of boundary-layer, and so on.

  4. Evolution of a vortex in glow discharge plasma

    SciTech Connect

    Soukhomlinov, V.S.; Sheverev, V.A.; Oetuegen, M.V.

    2005-05-01

    The evolution of a vortex in glow discharge plasma is studied analytically. Specifically, the mechanism of local energy deposition into the flow by the plasma is considered and its effect on the structure of an inviscid vortex is analyzed. The vortex is modeled by a set of Euler's equations while the energy transferred by the plasma into the gas is represented by Rayleigh mechanism. In this mechanism, the amount of heat addition is a function of local gas density. The analysis indicates that the plasma can have a considerable effect on the structure of a vortex. The inviscid calculations show that in a uniform discharge, a 1 cm vortex dies out in a fraction of a second.

  5. Study on Glow Discharge Plasma Used in Polyester Surface Modification

    NASA Astrophysics Data System (ADS)

    Liu, Wenzheng; Lei, Xiao; Zhao, Qiang

    2016-01-01

    To achieve an atmospheric pressure glow discharge (APGD) in air and modify the surface of polyester thread using plasma, the electric field distribution and discharge characteristics under different conditions were studied. We found that the region with a strong electric field, which was formed in a tiny gap between two electrodes constituting a line-line contact electrode structure, provided the initial electron for the entire discharge process. Thus, the discharge voltage was reduced. The dielectric barrier of the line-line contact electrodes can inhibit the generation of secondary electrons. Thus, the transient current pulse discharge was reduced significantly, and an APGD in air was achieved. We designed double layer line-line contact electrodes, which can generate the APGD on the surface of a material under treatment directly. A noticeable change in the surface morphology of polyester fiber was visualized with the aid of a scanning electron microscope (SEM). Two electrode structures - the multi-row line-line and double-helix line-line contact electrodes - were designed. A large area of the APGD plasma with flat and curved surfaces can be formed in air using these contact electrodes. This can improve the efficiency of surface treatment and is significant for the application of the APGD plasma in industries.

  6. Effects of traces of molecular gases (hydrogen, nitrogen) in glow discharges in noble gases

    NASA Astrophysics Data System (ADS)

    Steers, E. B. M.; Smid, P.; Hoffmann, V.

    2008-07-01

    The "Grimm" type of low pressure glow discharge source, introduced some forty years ago, has proved to be a versatile analytical source. A flat sample is used as the cathode and placed about 0.2mm away from the end of a hollow tubular anode leading to an obstructed discharge. When the source was first developed, it was used for the direct analysis of solid metallic samples by optical emission spectroscopy (OES), normally with argon as the plasma gas; it was soon found that, using suitable electrical parameters, the cathode material was sputtered uniformly from a circular crater of diameter equal to that of the tubular anode, so that the technique could be used for compositional depth profile analysis (CDPA). Over the years the capability and applications of the technique have steadily increased. The use of rf powered discharges now permits the analysis of non-conducting layers and samples; improved instrumental design now allows CDPA of ever thinner layers (e.g. resolution of layers 5 nm thick in multilayer stacks is possible). For the original bulk material application, pre-sputtering could be used to remove any surface contamination but for CDPA, analysis must start immediately the discharge is ignited, so that any surface contamination can introduce molecular gases into the plasma gas and have significant analytical consequences, especially for very thin layers; in addition, many types of samples now analysed contain molecular gases as components (either as occluded gas, or e.g. as a nitride or oxide), and this gas enters the discharge when the sample is sputtered. It is therefore important to investigate the effect of such foreign gases on the discharge, in particular on the spectral intensities and hence the analytical results. The presentation will concentrate mainly on the effect of hydrogen in argon discharges, in the concentration range 0-2 % v/v but other gas mixtures (e.g. Ar/N_2, Ne/H_2) will be considered for comparison. In general, the introduction of

  7. Ultrasonic nebulization atmospheric pressure glow discharge - Preliminary study

    NASA Astrophysics Data System (ADS)

    Greda, Krzysztof; Jamroz, Piotr; Pohl, Pawel

    2016-07-01

    Atmospheric pressure glow microdischarge (μAPGD) generated between a small-sized He nozzle jet anode and a flowing liquid cathode was coupled with ultrasonic nebulization (USN) for analytical optical emission spectrometry (OES). The spatial distributions of the emitted spectra from the novel coupled USN-μAPGD system and the conventional μAPGD system were compared. In the μAPGD, the maxima of the intensity distribution profiles of the atomic emission lines Ca, Cd, In, K, Li, Mg, Mn, Na and Sr were observed in the near cathode region, whereas, in the case of the USN-μAPGD, they were shifted towards the anode. In the novel system, the intensities of the analytical lines of the studied metals were boosted from several to 35 times. As compared to the conventional μAPGD-OES with the introduction of analytes through the sputtering and/or the electrospray-like nebulization of the flowing liquid cathode solution, the proposed method with the USN introduction of analytes in the form of a dry aerosol provides improved detectability of the studied metals. The detection limits of metals achieved with the USN-μAPGD-OES method were in the range from 0.08 μg L- 1 for Li to 52 μg L- 1 for Mn.

  8. Improved hydrogen ionization rate in enhanced glow discharge plasma immersion ion implantation by enlarging the interaction path using an insulating tube

    SciTech Connect

    Wang Zhuo; Zhu Ying; Li Liuhe; He Fushun; Dun Dandan; Li Fen; Lu Qiuyuan; Fu, Ricky K. Y.; Chu, Paul K.

    2011-02-15

    A small pointed hollow anode and large tabular cathode are used in enhanced glow discharge plasma immersion ion implantation (EGD-PIII). Electrons are repelled from the substrate by the electric field formed by the negative voltage pulses and concentrate in the vicinity of the anode to enhance the self-glow discharge process. To extend the application of EGD-PIII to plasma gases with low ionization rates, an insulating tube is used to increase the interaction path for electrons and neutrals in order to enhance the discharge near the anode. Results obtained from numerical simulation based on the particle-in-cell code, finite element method, and experiments show that this configuration enhances the ionization rate and subsequent ion implant fluence. The process is especially suitable for gases that have low ionization rates such as hydrogen and helium.

  9. Ion bombardment glow-discharge furnaces for atomic emission spectroscopy

    SciTech Connect

    Tanguay, S.L.

    1990-01-01

    Two glow discharge plasma devices for the atomic emission analysis of aqueous samples were investigated. The devices use thermal vaporization of samples from a graphite cathode coupled with glow-discharge excitation. Furnace heating of the cathode is accomplished by the positive ion bombardment of the cathode during plasma operation. The dc plasma operates in Ar at 0.5-5.0 torr, with currents up to 250 mA. A cw, axial magnetic field of up to 1.25 kG is applied to the cylindrical-post cathode system to reduce electron losses, thereby increasing plasma excitation and ionization efficiency. At higher currents, the cathodes heat to temperatures as high as 2,500{degree}C in the case of the cylindrical-post cathode. Hollow-cathode heating temperatures are lower under comparable conditions, due to the larger cathode surface area, greater cathode mass, and lower power dissipation. The peak furnace temperature using this configuration is approximately 2100{degree}C. The role of the emission of thermionic electrons from the hot cathodes in limiting the cathode heating and in regulating the cathode temperature are considered. Sample residues of up to 50 ng of the analyte are vaporized from the cylindrical-post cathode within a few seconds of the initiation of the discharge, resulting in a transient emission intensity profile. With the hollow-cathode furnace, vaporization may take several seconds. Although a lower rate of cathode heating and a lower sample vapor residence time results in limits of detection which are one to two orders of magnitude lower than those achieved using the cylindrical-post cathode system. For the hollow cathode, limits of detection are on the order of 10 pg to 1 ng.

  10. Effect of hydrogen ratio on plasma parameters of N2-H2 gas mixture glow discharge

    NASA Astrophysics Data System (ADS)

    El-Brulsy, R. A.; Abd Al-Halim, M. A.; Abu-Hashem, A.; Rashed, U. M.; Hassouba, M. A.

    2012-05-01

    A dc plane glow discharge in a nitrogen-hydrogen (N2-H2) gas mixture has been operated at discharge currents of 10 and 20 mA. The electron energy distribution function (EEDF) at different hydrogen concentrations is measured. A Maxwellian EEDF is found in the positive column region, while in both cathode fall and negative glow regions, a non-Maxwellian one is observed. Langmuir electric probes are used at different axial positions, gas pressures, and hydrogen concentrations to measure the electron temperature and plasma density. The electron temperature is found to increase with increasing H2 concentration and decrease with increasing both the axial distance from the cathode and the mixture pressure. At first, with increasing distance from the cathode, the ion density decreases, while the electron density increases; then, as the anode is further approached, they remain nearly constant. At different H2 concentrations, the electron and ion densities decrease with increasing the mixture pressure. Both the electron and ion densities slightly decrease with increasing H2 concentration.

  11. A lithium-fluoride flashover ion source cleaned with a glow discharge and irradiated with vacuum-ultraviolet radiation

    NASA Astrophysics Data System (ADS)

    Burns, E. J. T.; Woodworth, J. R.; Bieg, K. W.; Mehlhorn, T. A.; Stygar, W. A.; Sweeney, M. A.

    1988-01-01

    We have studied methods of varying the ion species generated by a lithium-fluoride overcoated anode in a 0.5-MV magnetically insulated ion diode. We found that cleaning the anode surface with a 13.6-MHz rf glow discharge or illuminating the anode with a pulsed soft x-ray, vacuum-ultraviolet (XUV) radiation source just before the accelerator pulse significantly altered the ion species of the ion beam produced by the diode. The glow-discharge plasma removed adsorbates (carbon, hydrogen, and oxygen) from the surface of the LiF flashover source. The ions seen were lithium and hydrogen. Unfortunately, the diode impedance with a lithium-fluoride anode was high and the ion efficiency was low; however, XUV irradiation of the surface dramatically lowered the impedance by desorbing neutrals from the ion source via photon-stimulated desorption. Current densities of ten times the Child-Langmuir space-charge limit were achieved under XUV irradiation. In particular, ion currents increased by over a factor of 3 when 12 mJ/cm2 of XUV radiation was used. However, with XUV irradiation the largest fraction of ions were fluorine, oxygen, carbon, and hydrogen, not lithium.

  12. Mass dependency of turbulent parameters in stationary glow discharge plasmas

    SciTech Connect

    Titus, J. B.; Alexander, A. B.; Wiggins, D. L.; Johnson, J. A. III

    2013-05-15

    A direct current glow discharge tube is used to determine how mass changes the effects of certain turbulence characteristics in a weakly ionized gas. Helium, neon, argon, and krypton plasmas were created, and an axial magnetic field, varied from 0.0 to 550.0 Gauss, was used to enhance mass dependent properties of turbulence. From the power spectra of light emission variations associated with velocity fluctuations, determination of mass dependency on turbulent characteristic unstable modes, energy associated with turbulence, and the rate at which energy is transferred from scale to scale are measured. The magnetic field strength is found to be too weak to overcome particle diffusion to the walls to affect the turbulence in all four types of plasmas, though mass dependency is still detected. Though the total energy and the rate at which the energy moves between scales are mass invariant, the amplitude of the instability modes that characterize each plasma are dependent on mass.

  13. Xe isotopic fractionation in a cathodeless glow discharge

    NASA Astrophysics Data System (ADS)

    Bernatowicz, T. J.; Fahey, A. J.

    1986-03-01

    Results are reported on the isotopic composition of Xe processed in cathodeless glow discharges in rarefied air at pressures of 20-40 microns Hg, in the presence of activated charcoal and in empty pyrex containers. Residual gas phase Xe and trapped Xe were found to be fractionated, with the trapped Xe fractionated up to 1 percent per amu. A model is presented for the fractionating process in which Xe ions are simultaneously implanted and sputtered from substrate material, with a mass dependence favoring retention of the heavy isotopes in the substrate. Results of the investigation show that plasma synthesis of carbonaceous material is unnecessary for producing Xe fractionations, and that the fractionations observed in previous synthesis experiments are probably due to implantation of ions into the synthesized material.

  14. High-pressure dc glow discharges in hollow diamond cathodes

    NASA Astrophysics Data System (ADS)

    Truscott, B. S.; Turner, C.; May, P. W.

    2016-04-01

    We report the generation and characterization of dc helium microdischarges at several times atmospheric pressure in monolithic diamond hollow-cathode devices having cavity diameters on the order of 100 μm. I-V characteristics indicated operation in the glow discharge regime even at nearly 10 atm, while spectroscopic measurements of the N2 C3Πu  →  B3Πg emission returned rotational temperatures always around 420 K, with a pressure-dependent vibrational population distribution. The variation of breakdown voltage with pressure closely followed Paschen’s law, but with offsets in both axes that we tentatively ascribe to strong diffusive loss and a partial thermalization of electron energies under the high pressures considered here.

  15. Glow discharge cleaning of carbon fiber composite and stainless steel

    NASA Astrophysics Data System (ADS)

    Airapetov, A.; Begrambekov, L.; Brémond, S.; Douai, D.; Kuzmin, A.; Sadovsky, Ya.; Shigin, P.; Vergasov, S.

    2011-08-01

    The paper experimentally investigates and analyses the features and mechanisms of both of oxygen removal by deuterium glow discharge from CFC, pyrolytic graphite and stainless steel subjected to irradiation in oxygen contaminated plasma. It is shown that oxygen implanted in pyrolytic graphite (PG) perpendicular to basal plates is removed after sputtering the layer slightly thicker than oxygen stopping zone (≈2 nm). Fast deuterium ions penetrating into CFC during GDC transfer the trapped oxygen atoms into the bulk. Thus, much thicker surface layer has to be removed (500-1000 nm) for oxygen release. Irradiation of stainless steel in plasma leads to formation of a barrier layer with thickness (2-4 nm) equal, or slightly higher than stopping range of oxygen ions. The layer accumulates the main fraction of implanted oxygen and prevents its penetration into the bulk. After barrier layer sputtering oxygen spreads into the bulk. Parameters and conditions of optimum GDC are discussed.

  16. Fluorination of polymethylmethaacrylate with tetrafluoroethane using DC glow discharge plasma

    NASA Astrophysics Data System (ADS)

    Guruvenket, S.; Iyer, Ganjigunte R. S.; Shestakova, Larisa; Morgen, Per; Larsen, N. B.; Mohan Rao, G.

    2008-07-01

    Fluorination of polymer surfaces has technological applications in various fields such as microelectronics, biomaterials, textile, packing, etc. In this study PMMA surfaces were fluorinated using DC glow discharge plasma. Tetrafluoroethane was used as the fluorinating agent. On the fluorinated PMMA surface, static water contact angle, surface energy, optical transmittance (UV-vis), XPS and AFM analyses were carried out. After the fluorination PMMA surface becomes hydrophobic with water contact angle of 107° without losing optical transparency. Surface energy of fluorine plasma-treated PMMA decreased from 35 mJ/cm 2 to 21.2 mJ/cm 2. RMS roughness of the fluorinated surface was 4.01 nm and XPS studies revealed the formation of C-CF x and CF 3 groups on the PMMA surface.

  17. Use of Atmospheric Glow Discharge Plasma to Modify Spaceport Materials

    NASA Technical Reports Server (NTRS)

    Trigwell, S.; Shuerger, A. C.; Buhler, C. R.; Calle, C. J.

    2006-01-01

    Numerous materials used in spaceport operations require stringent evaluation before they can be utilized. It is critical for insulative polymeric materials that any surface charge be dissipated as rapidly as possible to avoid Electrostatic Discharges (ESD) that could present a danger. All materials must pass the Kennedy Space Center (KSC) standard electrostatic test [1]; however several materials that are considered favorable for Space Shuttle and International Space Station use have failed. Moreover, to minimize contamination of Mars spacecraft, spacecraft are assembled under cleanroom conditions and specific cleaning and sterilizing procedures are required for all materials. However, surface characteristics of these materials may allow microbes to survive by protecting them from sterilization and cleaning techniques. In this study, an Atmospheric Pressure Glow Discharge Plasma (APGD) [2] was used to modify the surface of several materials. This allowed the materials surface to be modified in terms of hydrophilicity, roughness, and conductivity without affecting the bulk properties. The objectives of this study were to alter the surface properties of polymers for improved electrostatic dissipation characteristics, and to determine whether the consequent surface modification on spaceport materials enhanced or diminished microbial survival.

  18. Killing Microorganisms with the One Atmosphere Uniform Glow Discharge Plasma

    NASA Astrophysics Data System (ADS)

    South, Suzanne; Kelly-Wintenberg, Kimberly; Montie, T. C.; Reece Roth, J.; Sherman, Daniel; Morrison, Jim; Chen, Zhiyu; Karakaya, Fuat

    2000-10-01

    There is an urgent need for the development of new technologies for sterilization and decontamination in the fields of healthcare and industrial and food processing that are safe, cost-effective, broad-spectrum, and not deleterious to samples. One technology that meets these criteria is the One Atmosphere Uniform Glow Discharge Plasma (OAUGDP). The OAUGDP operates in air and produces uniform plasma without filamentary discharges at room temperature, making this technology advantageous for sterilization of heat sensitive materials. The OAUGDP operates in a frequency band determined by the ion trapping mechanisms provided that, for air, the electric field is above 8.5kV/cm. The OAUGDP efficiently generates plasma reactive oxygen species (ROS) including atomic oxygen and oxygen free radicals without the requirement of a vacuum system. We have demonstrated the efficacy of the OAUGDP in killing microorganisms including bacteria, yeast, viruses, and spores in seconds to minutes on a variety of surfaces such as glass, films and fabrics, stainless steel, paper, and agar.

  19. Low pressure glow discharge in a system with hollow electrode at floating potential

    NASA Astrophysics Data System (ADS)

    Babinov, N. A.

    2016-01-01

    This article describes the research of the low pressure gas discharge in a system with hollow electrode at the floating potential. The main characteristic features of the discharge distinguishing it from the glow discharge with hollow cathode are described. The studied type of discharge has good perspective to use in the plasma emission systems allowing to reach high current efficiency of the ion sources.

  20. Efficiency of surface cleaning by a glow discharge for plasma spraying coating

    NASA Astrophysics Data System (ADS)

    Kadyrmetov, A. M.; Kashapov, N. F.; Sharifullin, S. N.; Saifutdinov, A. I.; Fadeev, S. A.

    2016-06-01

    The article presents the results of experimental studies of the quality of cleaning steel surfaces by a glow discharge for plasma spraying. Shows the results of measurements of the angle of surface wetting and bond strength of the plasma coating to the surface treated. The dependence of the influence of the glow discharge power, chamber pressure, distance between the electrodes and the processing time of the surface on cleaning efficiency. Optimal fields of factors is found. It is shown increase joint strength coating and base by 30-80% as a result of cleaning the substrate surface by a glow discharge plasma spraying.

  1. Array of surface-confined glow discharges in atmospheric pressure helium: Modes and dynamics

    SciTech Connect

    Li, D.; Liu, D. X. E-mail: mglin5g@gmail.com; Nie, Q. Y.; Li, H. P.; Chen, H. L.; Kong, M. G. E-mail: mglin5g@gmail.com

    2014-05-19

    Array of atmospheric pressure surface discharges confined by a two-dimensional hexagon electrode mesh is studied for its discharge modes and temporal evolution so as to a theoretical underpinning to their growing applications in medicine, aerodynamic control, and environmental remediation. Helium plasma surface-confined by one hexagon-shaped rim electrode is shown to evolve from a Townsend mode to a normal and abnormal glow mode, and its evolution develops from the rim electrodes as six individual microdischarges merging in the middle of the hexagon mesh element. Within one hexagon element, microdischarges remain largely static with the mesh electrode being the instantaneous cathode, but move towards the hexagon center when the electrode is the instantaneous anode. On the entire array electrode surface, plasma ignition is found to beat an unspecific hexagon element and then spreads to ignite surrounding hexagon elements. The spreading of microdischarges is in the form of an expanding circle at a speed of about 3 × 10{sup 4} m/s, and their quenching starts in the location of the initial plasma ignition. Plasma modes influence how input electrical power is used to generate and accelerate electrons and as such the reaction chemistry, whereas plasma dynamics are central to understand and control plasma instabilities. The present study provides an important aspect of plasma physics of the atmospheric surface-confined discharge array and a theoretical underpinning to its future technological innovation.

  2. Synthesis of Single-Walled Carbon Nanotubes in a Glow Discharge Fine Particle Plasma

    SciTech Connect

    Imazato, N.; Imano, M.; Hayashi, Y.

    2008-09-07

    Carbon fine particles were synthesized being negatively charged and confined in a glow discharge plasma. The deposited fine particles were analyzed by Raman spectroscopy and transmission electron microscopy (TEM) and were confirmed to include single-walled carbon nanotubes.

  3. Radio frequency glow discharge-induced acidification of fluoropolymers.

    PubMed

    Krawczyk, Benjamin M; Baltrusaitis, Jonas; Yoder, Colin M; Vargo, Terrence G; Bowden, Ned B; Kader, Khalid N

    2011-12-01

    Fluoropolymer surfaces are unique in view of the fact that they are quite inert, have low surface energies, and possess high thermal stabilities. Attempts to modify fluoropolymer surfaces have met with difficulties in that it is difficult to control the modification to maintain bulk characteristics of the polymer. In a previously described method, the replacement of a small fraction of surface fluorine by acid groups through radio frequency glow discharge created a surface with unexpected reactivity allowing for attachment of proteins in their active states. The present study demonstrates that 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride (EDC) reacts with the acid groups on fluoropolymer surfaces in a novel reaction not previously described. This reaction yields an excellent leaving group in which a primary amine on proteins can substitute to form a covalent bond between a protein and these surfaces. In an earlier study, we demonstrated that collagen IV could be deposited on a modified PTFE surface using EDC as a linker. Once collagen IV is attached to the surface, it assembles to form a functional stratum resembling collagen IV in native basement membrane. In this study, we show data suggesting that the fluorine to carbon ratio determines the acidity of the fluoropolymer surfaces and how well collagen IV attaches to and assembles on four different fluoropolymer surfaces. PMID:21887736

  4. Glow-Discharge Production of Oxygen from the Martian Atmosphere

    NASA Astrophysics Data System (ADS)

    Hughes, Caleb; Outlaw, Ronald

    One of the most crucial aspects of any mission to Mars is a continual supply of oxygen for astronaut respiration on site. The most popular approach to this problem favors in-situ oxygen production on Mars, utilizing the CO2 Martian atmosphere. However, this requires a large energy budget. NASA's current plans for Mars include sending a system called MOXIE, which produces oxygen through solid oxide electrolysis at high temperatures. An alternative approach utilizes the 6 Torr Martian atmosphere to provide a continual source of oxygen by breaking down the molecule into CO and O using a glow-discharge. After dissociation, a thin film Agmembrane uniquely permeates the atomic oxygen which then recombines to O2 on the downstream side, where it is subsequently stored. By taking advantage of recent advances in thin film technology to reduce the thickness of the film to many orders of magnitude less than used in the initial study, a corresponding increase in O2 flux can be realized. The Ag thin film requires the support of a porous ceramic substructure. With this system, it is shown that this method produces a viable energy efficient alternative to MOXIE.

  5. Effect of volume and surface charges on discharge structure of glow dielectric barrier discharge

    SciTech Connect

    Xu, Shao-Wei; He, Feng; Wang, Yu; Li, Lulu; Ouyang, Ji-Ting

    2013-08-15

    The effect of volume and surface charges on the structure of glow dielectric barrier discharge (DBD) has been investigated numerically by using two-dimensional (2D) fluid modeling. The local increase of volume or surface charges induces a kind of activation-inhibition effect, which enhances the local volume discharge and inhibits the discharge in neighborhoods, resulting in non-uniform discharge. The activation-inhibition effect due to the non-uniform volume and/or surface charges depends on the non-uniformity itself and the applied voltage. The activation-inhibition of non-uniform charges has different effects on the volume charges and the accumulated surface charges. The distribution of remaining free charges (seed electrons) in volume at the beginning of voltage pulse plays a key role for the glow DBD structure, resulting in a patterned DBD, when the seed electrons are non-uniform at higher frequency and moderate voltage or uniform DBD, when the seed electrons are uniform at lower frequency or high voltage. The distribution of surface charges is not the determining factor but a result of the formed DBD structure.

  6. "Decoking" of a "coked" zeolite catalyst in a glow discharge.

    PubMed

    Khan, M A; Al-Jalal, A A; Bakhtiari, I A

    2003-09-01

    "Decoking" of a "coked" zeolite catalyst in a glow discharge in oxygen is investigated. The "decoking" process involves reactions of atomic oxygen (O atoms) with "coke" and yields gases such as CO, CO(2) as well as other gaseous products that could be easily pumped out. Three different modes of discharge were investigated including a static mode, a flowing-gas mode, and a periodic-purge mode where the oxygen and other gaseous products of the discharge were replaced by fresh O(2)gas after short but regular intervals of time. In some cases, additional heating was also used to provide base temperatures of the order of 100 degrees C to facilitate penetration of oxygen atoms into the inner layers and cages of the zeolite catalyst. This paper presents some results of spectroscopic analytical techniques used to monitor the atomization of oxygen, oxidation of "coke", and to confirm the process of "decoking". More specifically, radiation emission on the 3 s (5)S- 3p (5)P transitions of O around 777.2-777.5 nm were selected for monitoring the atomization of O(2). On the other hand, X-ray photo-electron spectroscopy (XPS) was used to determine the amount of residual carbon and extent of "decoking". Furthermore, evolution of CO and CO(2) gases as a function of time was systematically monitored in real time. For CO, the 451.1 nm band head belonging to the B(1) Sigma - A(1) Pi bands of the Angstrom system of the CO spectrum was used, while for CO(2), the band head at 353.4 nm belonging to the CO(2)(+) spectrum was used. The rates of evolution of CO and CO(2) were related to the rate of "decoking" of the catalyst. It is noted that in the periodic-purge mode, about 63% of the total yield of CO from a given sample of the catalyst appears in the first 3-min exposure to discharge whereas it takes up to 15 min to remove nearly 94% of the removable carbon under our experimental conditions. PMID:12861433

  7. Binary and ternary gas mixtures for use in glow discharge closing switches

    DOEpatents

    Hunter, Scott R.; Christophorou, Loucas G.

    1990-01-01

    Highly efficient binary and ternary gas mixtures for use in diffuse glow discharge closing switches are disclosed. The binary mixtures are combinations of helium or neon and selected perfluorides. The ternary mixtures are combinations of helium, neon, or argon, a selected perfluoride, and a small amount of gas that exhibits enhanced ionization characteristics. These mixtures are shown to be the optimum choices for use in diffuse glow discharge closing switches by virtue of the combined physio-electric properties of the mixture components.

  8. Note: Rapid reduction of graphene oxide paper by glow discharge plasma

    SciTech Connect

    Bo, Zheng; Qian, Jiajing; Duan, Liangping; Qiu, Kunzan Yan, Jianhua; Cen, Kefa; Han, Zhao Jun; Ostrikov, Kostya

    2015-05-15

    This note reports on a novel method for the rapid reduction of graphene oxide (GO) paper using a glow discharge plasma reactor. Glow discharge is produced and sustained between two parallel-plate graphite electrodes at a pressure of 240 mTorr. By exposing GO paper at the junction of negative-glow and Faraday-dark area for 4 min, the oxygen-containing groups can be effectively removed (C/O ratio increases from 2.6 to 7.9), while the material integrality and flexibility are kept well. Electrochemical measurements demonstrate that the as-obtained reduced GO paper can be potentially used for supercapacitor application.

  9. Long range temporal correlation in the chaotic oscillations of a dc glow discharge plasma

    SciTech Connect

    Lahiri, S.; Roychowdhury, D.

    2012-08-15

    Long range temporal correlations in the fluctuations of the plasma floating potentials (measured using a Langmuir probe) are investigated in a dc glow discharge plasma. Keeping the neutral pressure constant, the discharge voltage was varied and at the formation of the plasma, quasi periodic oscillations were excited and on further increase of the discharge voltage they became chaotic (irregular) beyond a threshold voltage. We compared the Lyapunov exponent with the Hurst exponent obtained from R/S statistics which showed an opposite behaviour at the transition point. These results are perhaps new since we have not come across such comparative analysis for chaotic oscillations in a glow discharge plasma before.

  10. Influence of longitudinal argon flow on DC glow discharge at atmospheric pressure

    NASA Astrophysics Data System (ADS)

    Zhu, Sha; Jiang, Weiman; Tang, Jie; Xu, Yonggang; Wang, Yishan; Zhao, Wei; Duan, Yixiang

    2016-05-01

    A one-dimensional self-consistent fluid model was employed to investigate the influence of longitudinal argon flow on the DC glow discharge at atmospheric pressure. It is found that the charges exhibit distinct dynamic behaviors at different argon flow velocities, accompanied by a considerable change in the discharge structure. The positive argon flow allows for the reduction of charge densities in the positive column and negative glow regions, and even leads to the disappearance of negative glow. The negative argon flow gives rise to the enhancement of charge densities in the positive column and negative glow regions. These observations are attributed to the fact that the gas flow convection influences the transport of charges through different manners by comparing the argon flow velocity with the ion drift velocity. The findings are important for improving the chemical activity and work efficiency of the plasma source by controlling the gas flow in practical applications.

  11. Gas Breakdown of Radio Frequency Glow Discharges in Helium at near Atmospheric Pressure

    NASA Astrophysics Data System (ADS)

    Liu, Xinkun; Xu, Jinzhou; Cui, Tongfei; Guo, Ying; Zhang, Jing; Shi, Jianjun

    2013-07-01

    A one-dimensional self-consistent fluid model was developed for radio frequency glow discharge in helium at near atmospheric pressure, and was employed to study the gas breakdown characteristics in terms of breakdown voltage. The effective secondary electron emission coefficient and the effective electric field for ions were demonstrated to be important for determining the breakdown voltage of radio frequency glow discharge at near atmospheric pressure. The constant of A was estimated to be 64±4 cm-1Torr-1, which was proportional to the first Townsend coefficient and could be employed to evaluate the gas breakdown voltage. The reduction in the breakdown voltage of radio frequency glow discharge with excitation frequency was studied and attributed to the electron trapping effect in the discharge gap.

  12. Decomposition Characteristics of an Artificial Biogas in a Low-Pressure DC Glow Discharge

    NASA Astrophysics Data System (ADS)

    Itoh, Yasuhiro; Oshita, Takamasa; Satoh, Kohki; Itoh, Hidenori

    The decomposition characteristics of an artificial biogas, which is a mixture of CH4, CO2 and H2S, using a low pressure DC glow discharge have been investigated. It is found that H2, CO, C2H2, H2O, CS2 and COS are produced from the artificial biogas in the glow discharge. About 65 % of hydrogen atoms in CH4 are converted into H2 at the input energy of 800 J, at which CH4 is completely decomposed, and the decomposition characteristics of the artificial biogas has little dependency on H2S additive. Farther, H2S has a tendency to be decomposed earlier than the other components of the artificial biogas. When the glow discharge is generated in the artificial biogas with H2S, some of carbon atoms are found to deposit on electrodes and the wall of a discharge chamber.

  13. Linear and Nonlinear Dust Acoustic Waves, Shocks and Stationary Structures in a dc-Glow-Discharge Dusty Plasma

    NASA Astrophysics Data System (ADS)

    Merlino, Robert

    2011-10-01

    In 1990, Rao, Shukla, and Yu (Planet. Space Sci. 38, 543) predicted the existence of the dust acoustic (DA) wave, a low-frequency (~ few Hz), compressional dust density wave that propagates through a dusty plasma at a phase speed ~ several cm/s. The DA wave was first observed by Chu et. al., (J. Phys. D: Appl. Phys. 27, 296, 1994) in an rf-produced dusty plasma, and by Barkan et. al., (Barkan et. al. Phys. Plasmas 2, 2161, 1995) who obtained video images of the DA wave trains using light scattering from a dust suspension confined in an anodic glow discharge plasma formed within a Q machine plasma. The dispersion relation for DAWs was measured by Thompson et. al., (Phys. Plasmas 4, 2331, 1997) in a dc glow discharge dusty plasma by modulating the discharge current at a set frequency. DAWs have been investigated by many groups both in weakly-coupled and strongly-coupled dusty plasmas (E. Thomas, Jr., Contrib. Plasma Phys. 49, 316, 2009). In most experiments where DA waves are present, the wave amplitude is relatively high, indicating that they are nonlinear. In this talk, results of our recent experiments on DAWs will be presented. The following experiments, performed in a dc glow-discharge dusty plasma will be described: (1) Observations of spontaneously excited nonlinear, cylindrical DAWs, which exhibit confluence of waves propagating at different speeds. (2) Investigations of self-steepening DAWs that develop into DA shocks with thicknesses comparable to the interparticle separation (Heinrich et. al., Phys. Rev. Lett. 103, 115001, 2009). (3) Measurements of the linear growth rates of DAWs excited in merging dust clouds. (4) The formation of stationary, stable dust density structures appearing as non-propagating DAWs (Heinrich et. al., Phys. Rev. E, in press, 2011). This work was performed in collaboration with S. H. Kim, J. R. Heinrich, and J. K. Meyer. Work supported by DOE Grant No. DE-FG01-04ER54795

  14. Characteristics of sheath-driven tangential flow produced by a low-current DC surface glow discharge plasma actuator

    NASA Astrophysics Data System (ADS)

    Shin, Jichul; Shajid Rahman, Mohammad

    2014-08-01

    An experimental investigation of low-speed flow actuation at near-atmospheric pressure is presented. The flow actuation is achieved via low-current ( \\lesssim 1.0 mA) continuous or pulsed DC surface glow discharge plasma. The plasma actuator, consisting of two sharp-edged nickel electrodes, produces a tangential flow in a direction from anode to cathode, and is visualized using high-speed schlieren photography. The induced flow velocity estimated via the schlieren images reaches up to 5 m/s in test cases. The actuation capability increases with pressure and electrode gap distances, and the induced flow velocity increases logarithmically with the discharge power. Pulsed DC exhibits slightly improved actuation capability with better directionality. An analytic estimation of induced flow velocity obtained based on ion momentum in the cathode sheath and gas dynamics in one-dimensional flow yields values similar to those measured.

  15. Glow discharge with electrostatic confinement of electrons in a chamber bombarded by fast electrons

    NASA Astrophysics Data System (ADS)

    Metel, A. S.; Grigoriev, S. N.; Melnik, Yu. A.; Prudnikov, V. V.

    2011-07-01

    A metal substrate is immersed in plasma of glow discharge with electrostatic confinement of electrons inside the vacuum chamber volume V ≈ 0.12 m3 filled with argon or nitrogen at pressures 0.005-5 Pa, and dependence of discharge characteristics on negative substrate potential is studied. Emitted by the substrate secondary electrons bombard the chamber walls and it results in electron emission growth of the chamber walls and rise of gas ionization intensity inside the chamber. Increase of voltage U between the chamber and the substrate up to 10 kV at a constant discharge current I d in the anode circuit results in a manifold rise of current I in the substrate circuit and decrease of discharge voltage U d between the anode and the chamber from hundreds to tens of volts. At pressure p < 0.05 Pa nonuniformity of plasma density does not exceed ˜10%. Using the Child-Langmuir law, as well as measurement results of sheath width d between homogeneous plasma and a lengthy flat substrate dependent on voltage U ion current density j i on the substrate surface and ion-electron emission coefficient γ i are calculated. After the current in circuit of a substrate made of the same material is measured, the γ i values may be used to evaluate the average dose of ion implantation. The rate of dose rise at a constant high voltage U is by an order of magnitude higher than in known systems equipped with generators of square-wave high-voltage pulses. Application to the substrate of 10-ms-wide sinusoidal high-voltage pulses, which follow each other with 100-Hz frequency, results in synchronous oscillations of voltage U and ion current I i in the substrate circuit. In this case variation of the sheath width d due to oscillations of U and Ii is insignificant and d does not exceed several centimeters thus enabling substrate treatment in a comparatively small vacuum chamber.

  16. Rapid oxidation and immobilization of arsenic by contact glow discharge plasma in acidic solution.

    PubMed

    Jiang, Bo; Hu, Ping; Zheng, Xing; Zheng, Jingtang; Tan, Minghui; Wu, Mingbo; Xue, Qinzhong

    2015-04-01

    Arsenic is a priority pollutant in aquatic ecosystem and therefore the remediation of arsenic-bearing wastewater is an important environmental issue. This study unprecedentedly reported simultaneous oxidation of As(III) and immobilization of arsenic can be achieved using contact glow discharge process (CGDP). CGDP with thinner anodic wire and higher energy input were beneficial for higher As(V) production efficiency. Adding Fe(II) in CGDP system significantly enhanced the oxidation rate of As(III) due to the generations of additional OH and Fe(IV) species, accompanied with which arsenic can be simultaneously immobilized in one process. Arsenic immobilization can be favorably obtained at solution pH in the range of 4.0-6.0 and Fe(II) concentration from 250 to 1000 μM. The presence of organics (i.e., oxalic acid, ethanol and phenol) retarded the arsenic immobilization by scavenging OH or complexing Fe(III) in aqueous solution. On the basis of these results, a mechanism was proposed that the formed ionic As(V) rapidly coprecipitated with Fe(III) ions or was adsorbed on the ferric oxyhydroxides with the formation of amorphous ferric arsenate-bearing ferric oxyhydroxides. This CGDP-Fenton system was of great interest for engineered systems concerned with the remediation of arsenic containing wastewater. PMID:25600320

  17. Requirements of the glow discharge techniques to the fundamentals - an exemplary approach.

    PubMed

    Broekaert, J A

    1996-07-01

    The importance of gaining knowledge on the fundamental processes in glow discharges in the field of the signal generation, the sputtering phenomena taking place in the case of solids and the analyte breakdown in the excitation of gases is treated. For gaining more knowledge on the plasma processes diagnostics including temperature and electron number density as well as gas and analyte atom and ion densities are required. For the sputtering process, it is shown at the hand of measurements with gas-jet enhanced sputtering and magnetically enhanced sputtering that selective sputtering may occur and that the influence of the analyte loading of the glow discharge plasma needs further study. For the case of the introduction of gaseous samples, the analyte distribution as well as the break-down mechanisms and kinetics in the case of molecular species ask for further study as shown by experiments with gas-sampling glow discharges. PMID:15045277

  18. Non-Thermal Equilibrium Atmospheric Pressure Glow-Like Discharge Plasma Jet

    NASA Astrophysics Data System (ADS)

    Chang, Zhengshi; Yao, Congwei; Zhang, Guanjun

    2016-01-01

    Non-thermal equilibrium atmospheric pressure plasma jet (APPJ) is a cold plasma source that promises various innovative applications, and the uniform APPJ is more favored. Glow discharge is one of the most effective methods to obtain the uniform discharge. Compared with the glow dielectric barrier discharge (DBD) in atmospheric pressure, pure helium APPJ shows partial characteristics of both the glow discharge and the streamer. In this paper, considering the influence of the Penning effect, the electrical and optical properties of He APPJ and Ar/NH3 APPJ were researched. A word “Glow-like APPJ” is used to characterize the uniformity of APPJ, and it was obtained that the basic characteristics of the glow-like APPJ are driven by the kHz AC high voltage. The results can provide a support for generating uniform APPJ, and lay a foundation for its applications. supported by National Natural Science Foundation of China (Nos. 51307133, 51125029, 51221005) and the Fundamental Research Funds for the Central Universities of China (Nos. xjj2012132, xkjc2013004)

  19. A Study of a Striated Positive Column after Ethanol Impurity Injection in an Air DC Glow Discharge

    NASA Astrophysics Data System (ADS)

    Berzak, Laura; Post Zwicker, Andrew

    2003-04-01

    In a glow discharge when ethanol (CH3CH2OH) was injected, a series of atypical striations formed through the positive column. When the pressure decreased as the ethanol evaporated and was evacuated by the vacuum pump, this behavior decayed away until only an anode glow or normal discharge remained. Varying interelectrode spacings and quantities of ethanol yielded similar patterns. The typical evolution as the pressure decreased consisted of a visible traveling wave traveling from the anode to the cathode followed by numerous, thin ( 1.6 mm) striations evenly spaced down the entire length of the positive column. These, shifted back toward the anode and transformed into bent striations with the tip of the 'V' pointing toward the cathode, and finally, the 'V' striations grouped into fours and took on the appearance of beats. The unusual 'V' striations may be due in part to a contraction of the column, causing the equipotential surfaces to shift from smooth convex to the observed striation shape. The conditions for this contraction effect include a nonlinearly increasing dependence of electron production rate on electron density and a bulk recombination rate higher than that at the tube walls. Visible emission spectra indicated the presence of carbon monoxide (CO), signifying that the striations are due to not only vibrational excitation of the ethanol molecule but also to decomposition and subsequent excitation of the decomposition products as well. One possible mechanism of decomposition is the formation of a radical cation from the ethanol molecule and the ensuing loss of a proton to yield formaldehyde; this then would follow an analogous decomposition to produce carbon monoxide. Thus, there may exist additional charged species which can then contribute to the unique observations. Further analysis, if possible, will include higher temporal resolution spectroscopy and a detailed model of the positive column under these specific conditions.

  20. Observation and interpretation of energy efficient, diffuse direct current glow discharge at atmospheric pressure

    SciTech Connect

    Tang, Jie Jiang, Weiman; Wang, Yishan; Zhao, Wei; Li, Jing; Duan, Yixiang

    2015-08-24

    A diffuse direct-current glow discharge was realized with low energy consumption and high energy utilization efficiency at atmospheric pressure. The formation of diffuse discharge was demonstrated by examining and comparing the electrical properties and optical emissions of plasmas. In combination with theoretical derivation and calculation, we draw guidelines that appearance of nitrogen ions at low electron density is crucial to enhance the ambipolar diffusion for the expansion of discharge channel and the increasing ambipolar diffusion near the cathode plays a key role in the onset of diffuse discharge. An individual-discharge-channel expansion model is proposed to explain the diffuse discharge formation.

  1. Observation and interpretation of energy efficient, diffuse direct current glow discharge at atmospheric pressure

    NASA Astrophysics Data System (ADS)

    Tang, Jie; Jiang, Weiman; Li, Jing; Wang, Yishan; Zhao, Wei; Duan, Yixiang

    2015-08-01

    A diffuse direct-current glow discharge was realized with low energy consumption and high energy utilization efficiency at atmospheric pressure. The formation of diffuse discharge was demonstrated by examining and comparing the electrical properties and optical emissions of plasmas. In combination with theoretical derivation and calculation, we draw guidelines that appearance of nitrogen ions at low electron density is crucial to enhance the ambipolar diffusion for the expansion of discharge channel and the increasing ambipolar diffusion near the cathode plays a key role in the onset of diffuse discharge. An individual-discharge-channel expansion model is proposed to explain the diffuse discharge formation.

  2. Producing a Radioactive Source in a Deuterated Palladium Electrode Under Direct-Current Glow Discharge

    SciTech Connect

    Yamada, Hiroshi; Uchiyama, Kazuyoshi; Kawata, Nobuhiko; Kurisawa, Yoshiyuki; Nakamura, Mitsuru

    2001-03-15

    Anomalous gamma emission was rarely observed during direct-current glow discharge in {approx}3 Torrs of deuterium gas using a deuterated palladium foil cathode. Autoradiography after the discharge experiment showed that isotopes with low- and high-energy radiation components were produced before or during the discharge. The palladium foil after the anomalous gamma-ray emission was analyzed by secondary ion mass spectroscopy, which revealed a considerable increase in the content of iron and copper on the surface.

  3. Endotoxin removal by radio frequency gas plasma (glow discharge)

    NASA Astrophysics Data System (ADS)

    Poon, Angela

    2011-12-01

    Contaminants remaining on implantable medical devices, even following sterilization, include dangerous fever-causing residues of the outer lipopolysaccharide-rich membranes of Gram-negative bacteria such as the common gut microorganism E. coli. The conventional method for endotoxin removal is by Food & Drug Administration (FDA)-recommended dry-heat depyrogenation at 250°C for at least 45 minutes, an excessively time-consuming high-temperature technique not suitable for low-melting or heat-distortable biomaterials. This investigation evaluated the mechanism by which E. coli endotoxin contamination can be eliminated from surfaces during ambient temperature single 3-minute to cumulative 15-minute exposures to radio-frequency glow discharge (RFGD)-generated residual room air plasmas activated at 0.1-0.2 torr in a 35MHz electrodeless chamber. The main analytical technique for retained pyrogenic bio-activity was the Kinetic Chromogenic Limulus Amebocyte Lysate (LAL) Assay, sufficiently sensitive to document compliance with FDA-required Endotoxin Unit (EU) titers less than 20 EU per medical device by optical detection of enzymatic color development corresponding to < 0.5 EU/ml in sterile water extracts of each device. The main analytical technique for identification of chemical compositions, amounts, and changes during sequential reference Endotoxin additions and subsequent RFGD-treatment removals from infrared (IR)-transparent germanium (Ge) prisms was Multiple Attenuated Internal Reflection (MAIR) infrared spectroscopy sensitive to even monolayer amounts of retained bio-contaminant. KimaxRTM 60 mm x 15 mm and 50mm x 15mm laboratory glass dishes and germanium internal reflection prisms were inoculated with E. coli bacterial endotoxin water suspensions at increments of 0.005, 0.05, 0.5, and 5 EU, and characterized by MAIR-IR spectroscopy of the dried residues on the Ge prisms and LAL Assay of sterile water extracts from both glass and Ge specimens. The Ge prism MAIR

  4. An XPS study of the KCl surface oxidation in oxygen glow discharge

    NASA Astrophysics Data System (ADS)

    Stoch, J.; Ladecka, M.

    1988-05-01

    The reaction between the surface of KCl and oxygen in a glow discharge has been studied by X-ray photoemission spectroscopy (XPS). Oxygen glow discharge treatment resulted in the formation of a superoxide, which decomposed under vacuum at room temperature to KO 2 and finally to K 2O. No evidence of KClO 3 or KClO 4 formation has been found. Binding energies of some oxygen species in potassium oxides were determined. The possible role of potassium in K-doped silver catalysts of ethylene epoxidation is discussed.

  5. Binary and ternary gas mixtures for use in glow discharge closing switches

    DOEpatents

    Hunter, S.R.; Christophorou, L.G.

    1988-04-27

    Highly efficient binary and ternary gas mixtures for use in diffuse glow discharge closing switches are disclosed. The binary mixtures are combinations of helium or neon and selected perfluorides. The ternary mixtures are combinations of helium, neon, or argon, a selected perfluoride, and a small amount of gas that exhibits enhanced ionization characteristics. These mixtures are shown to be the optimum choices for use in diffuse glow discharge closing switches by virtue if the combines physio-electric properties of the mixture components. 9 figs.

  6. Binary and ternary gas mixtures with temperature enhanced diffuse glow discharge characteristics for use in closing switches

    DOEpatents

    Christophorou, Loucas G.; Hunter, Scott R.

    1990-01-01

    An improvement to the gas mixture used in diffuse glow discharge closing switches is disclosed which includes binary and ternary gas mixtures which are formulated to exhibit decreasing electron attachment with increasing temperature. This increases the efficiency of the conductance of the glow discharge and further inhibits the formation of an arc.

  7. Binary and ternary gas mixtures with temperature enhanced diffuse glow discharge characteristics for use in closing switches

    DOEpatents

    Christophorou, L.G.; Hunter, S.R.

    1988-06-28

    An improvement to the gas mixture used in diffuse glow discharge closing switches is disclosed which includes binary and ternary gas mixtures which are formulated to exhibit decreasing electron attachment with increasing temperature. This increases the efficiency of the conductance of the glow discharge and further inhibits the formation of an arc. 11 figs.

  8. Binary and ternary gas mixtures with temperature enhanced diffuse glow discharge characteristics for use in closing switches

    DOEpatents

    Christophorou, L.G.; Hunter, S.R.

    1990-06-26

    An improvement to the gas mixture used in diffuse glow discharge closing switches is disclosed which includes binary and ternary gas mixtures which are formulated to exhibit decreasing electron attachment with increasing temperature. This increases the efficiency of the conductance of the glow discharge and further inhibits the formation of an arc. 11 figs.

  9. Parametric Investigations of an Atmospheric pressure Uniform Glow Discharge in helium

    NASA Astrophysics Data System (ADS)

    Ben Gadri, Rami

    1997-11-01

    In the cold plasma processing field, applications of the atmospheric pressure uniform glow discharge are numerous. Among them one can mention the increase of the surface energy of materials, the cleaning and etching of surfaces, and the decontamination and sterilization. The development of the glow regime at atmospheric pressure permits to avoid the technical and economical drawbacks of low pressure glow discharge systems. It also increases the efficiency of the surface treatment as compared to the corona discharge. In these conditions, a glow regime is obtained and studied in particular experimental conditions. The working gas is helium, the frequency in the range 1-20 kHz, the gap distance of some mm and the metallic electrodes are covered by a dielectric layer. The current is characterized by one peak per half cycle and is typically in the range of a few tens of mA. Since this discharge involves complex nonlinear processes and is sensitive to the variation of its parameters, detailed experimental (Ph. Decomps (1996), PhD thesis, Universite Paul Sabatier Toulouse France, No d'ordre 2538.) and numerical studies, covering wide ranges of system parameters, were required. These investigations allowed the determination of the optimal operating conditions for which the discharge remains of the glow type, and therefore induces a better surface treatment. In this paper the detailed theory ( Ben Gadri R., Rabehi A., Massines F. and Segur P. (1994), XIIth Eur. Sect. Conf. on the At. & Mol. Phy. of Ionized Gases, The Netherlands, 23-26 August, pp. 228-229.) of the one dimensional f luid model and a parametric study of the discharge characteristics are presented. A particular attention will be given to the influence of the different system parameters on the operational mode of the discharge.

  10. Effect of hydrogen ratio on plasma parameters of N{sub 2}-H{sub 2} gas mixture glow discharge

    SciTech Connect

    El-Brulsy, R. A.; Abd Al-Halim, M. A.; Abu-Hashem, A.; Rashed, U. M.; Hassouba, M. A.

    2012-05-15

    A dc plane glow discharge in a nitrogen-hydrogen (N{sub 2}-H{sub 2}) gas mixture has been operated at discharge currents of 10 and 20 mA. The electron energy distribution function (EEDF) at different hydrogen concentrations is measured. A Maxwellian EEDF is found in the positive column region, while in both cathode fall and negative glow regions, a non-Maxwellian one is observed. Langmuir electric probes are used at different axial positions, gas pressures, and hydrogen concentrations to measure the electron temperature and plasma density. The electron temperature is found to increase with increasing H{sub 2} concentration and decrease with increasing both the axial distance from the cathode and the mixture pressure. At first, with increasing distance from the cathode, the ion density decreases, while the electron density increases; then, as the anode is further approached, they remain nearly constant. At different H{sub 2} concentrations, the electron and ion densities decrease with increasing the mixture pressure. Both the electron and ion densities slightly decrease with increasing H{sub 2} concentration.

  11. Simulation of stationary glow patterns in dielectric barrier discharges at atmospheric pressure

    SciTech Connect

    Liu, Fucheng He, Yafeng; Dong, Lifang

    2014-12-15

    Self-organized stationary patterns in dielectric barrier discharges operating in glow regime at atmospheric pressure are investigated by a self-consistent two-dimensional fluid model. The simulation results show that two different modes, namely, the diffuse mode and the static patterned mode, can be formed in different ranges of the driving frequency. The discharge operates in Townsend regime in the diffuse mode, while it operates in a glow regime inside the filaments and in a Townsend regime outside the filaments in the stable pattered mode. The forming process of the stationary filaments can be divided into three stages, namely, destabilizing stage, self-assembling stage, and stable stage. The space charge associated with residual electron density and surface charge is responsible for the formation of these stationary glow patterns.

  12. Chemical equilibria of rare earth oxides in glow-discharge mass spectrometry

    SciTech Connect

    Mei, Y.

    1992-01-01

    This research centers around method development and fundamental exploration of the rare earth elements (REE) in glow discharge mass spectrometry (GDMS). The capability of GDMS to analyze directly solids materials eliminates the sample dissolution and preconcentration steps required by many other methods. The simplicity of sample preparation and instrumental operation makes GDMS a promising analytical technique for the field of earth science. Initial studies were dedicated to improving the detection sensitivity of GDMS in analyzing the REE. This was accomplished by eliminating water contamination, a factor that was found to prevent the conversion of the rare earth oxidized to their atomic form in the glow discharge plasma. Methods experimented for water elimination included the uses of both a cryogenic cooling device and getter reagents. When used to determine the REE concentrations in a standard rock sample, the chemical elimination approach yielded comparable results to that obtained by other analytical methods. Further studies focused on probing the chemical reactions involving the REE and other plasma constituents in the glow discharge. It is proposed that the availability of the atomic REE in the glow discharge is strongly influenced by the oxidant and reductant contents in the plasma. Species that contain oxygen tend to shift the redox equilibria of REE toward the formation of their oxides, whereas species that compete for oxygen help reduce the oxidant content in the plasma, and shift the REE redox equilibria toward the formation of the REE atoms. Factors that govern the reaction processes of the REE equilibria were investigated by means of plasma reagent introduction and time-resolved discharge operation. Results indicate that while redox equilibria between the elemental REE and their monoxides exist on the cathode surface and in the gas phase, interactions occurring in the gas phase are probably the main paths for this equilibration in the glow discharge.

  13. Radio frequency atmospheric pressure glow discharge in α and γ modes between two coaxial electrodes

    NASA Astrophysics Data System (ADS)

    Shang, Wanli; Wang, Dezhen; Zhang, Yuantao

    2008-09-01

    The discharge in pure helium and the influence of small nitrogen impurities at atmospheric pressure are investigated based on a one-dimensional self-consistent fluid model controlled by a dielectric barrier between two coaxial electrodes. The simulation of the radiofrequency (rf) discharge is based on the one-dimensional continuity equations for electrons, ions, metastable atoms, and molecules, with the much simpler current conservation law replacing the Poisson equation for electric field. Through a computational study of rf atmospheric glow discharges over a wide range of current density, this paper presents evidence of at least two glow discharge modes, namely the α mode and the γ mode. The simulation results show the asymmetry of the discharge set exercises great influence on the discharge mechanisms compared to that with parallel-plane electrodes. It is shown that the particle densities are not uniform in the discharge region but increase gradually from the outer to the inner electrode in both modes. The contrasting dynamic behaviors of the two glow modes are studied. Secondary electron emission strongly influences gas ionization in the γ mode yet matters little in the α mode.

  14. High explosives vapor detection by atmospheric sampling glow discharge ionization/tandem mass spectrometry

    SciTech Connect

    McLuckey, S.A.; Goeringer, D.E.; Asano, K.G.

    1996-02-01

    The combination of atmospheric sampling glow discharge ionization with tandem mass spectrometry for the detection of traces of high explosives is described. Particular emphasis is placed on use of the quadrupole ion trap as the type of tandem mass spectrometer. Atmospheric sampling glow discharge provides a simple, rugged, and efficient means for anion formation while the quadrupole ion trap provides for efficient tandem mass spectrometry. Mass selective ion accumulation and non-specific ion activation methods can be used to overcome deleterious effects arising from ion/ion interactions. Such interactions constitute the major potential technical barrier to the use of the ion trap for real-time monitoring of targeted compounds in uncontrolled and highly variable matrices. Tailored waveforms can be used to effect both mass selective ion accumulation and ion activation. Concatenated tailored waveforms allow for both functions in a single experiment thereby providing the capability for monitoring several targeted species simultaneously. The combination of atmospheric sampling glow discharge ionization with a state-of-the-art analytical quadrupole ion trap is a highly sensitive and specific detector for traces of high explosives. The combination is also small and inexpensive relative to virtually any other form of tandem mass spectrometry. The science and technology underlying the glow discharge/ion trap combination is sufficiently mature to form the basis for an engineering effort to make the detector portable. 85 refs.

  15. Plasma Processing with a One Atmosphere Uniform Glow Discharge Plasma (OAUGDP)

    NASA Astrophysics Data System (ADS)

    Reece Roth, J.

    2000-10-01

    The vast majority of all industrial plasma processing is conducted with glow discharges at pressures below 10 torr. This has limited applications to high value workpieces as a result of the large capital cost of vacuum systems and the production constraints of batch processing. It has long been recognized that glow discharges would play a much larger industrial role if they could be operated at one atmosphere. The One Atmosphere Uniform Glow Discharge Plasma (OAUGDP) has been developed at the University of Tennessee Plasma Sciences Laboratory. The OAUGDP is non-thermal RF plasma with the time-resolved characteristics of a classical low pressure DC normal glow discharge. An interdisciplinary team was formed to conduct exploratory investigations of the physics and applications of the OAUGDP. This team includes collaborators from the UTK Textiles and Nonwovens Development Center (TANDEC) and the Departments of Electrical and Computer Engineering, Microbiology, Food Science and Technology, and Mechanical and Aerospace Engineering and Engineering Science. Exploratory tests were conducted on a variety of potential plasma processing and other applications. These include the use of OAUGDP to sterilize medical and dental equipment and air filters; diesel soot removal; plasma aerodynamic effects; electrohydrodynamic (EDH) flow control of the neutral working gas; increasing the surface energy of materials; increasing the wettability and wickability of fabrics; and plasma deposition and directional etching. A general overview of these topics will be presented.

  16. Self-Organization of a Laminar Structure of a Normal Glow Discharge

    NASA Astrophysics Data System (ADS)

    Timerkaev, B. A.; Petrova, O. A.; Saifutdinov, A. I.

    2016-03-01

    The behavior of a glow discharge at low pressures is considered. A combined experimental and theoretical method for determining the distributions of electron and ion concentrations in the discharge chamber is proposed. It is shown that the concentrations of charged particles in the negative glow rise not due to the intense ionization by fast electrons from the cathode regions, but instead due to the slowing down of their drift motion. The use of an experimental curve of the potential distribution along a discharge chamber and account of the nonlocal dependence of the Townsend coefficient on the electric field strength have allowed obtaining the distribution of the electric field strength and determining the exact character of variation in the concentration of charged particles along the discharge axis.

  17. Atomic iodine production in a gas flow by decomposing methyl iodide in a dc glow discharge

    SciTech Connect

    Mikheyev, P A; Shepelenko, A A; Voronov, A I; Kupryaev, Nikolai V

    2002-01-31

    The production of atomic iodine for an oxygen - iodine laser is studied by decomposing methyl iodide in a dc glow discharge in a vortex gas flow. The concentration of iodine atoms in discharge products was measured from the atomic iodine absorption of the radiation of a single-frequency tunable diode laser at a wavelength of 1.315 {mu}m. Atomic iodine concentrations sufficient for the operation of an oxygen - iodine laser were obtained. The concentration of atomic iodine amounted to 3.6 x 10{sup 15} cm{sup -3} for a pressure of the carrying argon gas of 15 Torr. The discharge stabilisation by a vortex gas flow allowed the glow discharge to be sustained in a strongly electronegative halogen-containing gas mixture for pressures up to 20 Torr. (active media)

  18. Investigation of complexity dynamics of inverse and normal homoclinic bifurcation in a glow discharge plasma

    SciTech Connect

    Saha, Debajyoti Kumar Shaw, Pankaj; Janaki, M. S.; Sekar Iyengar, A. N.; Ghosh, Sabuj; Mitra, Vramori Michael Wharton, Alpha

    2014-03-15

    Order-chaos-order was observed in the relaxation oscillations of a glow discharge plasma with variation in the discharge voltage. The first transition exhibits an inverse homoclinic bifurcation followed by a homoclinic bifurcation in the second transition. For the two regimes of observations, a detailed analysis of correlation dimension, Lyapunov exponent, and Renyi entropy was carried out to explore the complex dynamics of the system.

  19. Nonlocal control of electron temperature in short direct current glow discharge plasma

    SciTech Connect

    Demidov, V. I.; Kudryavtsev, A. A.; Stepanova, O. M.; Kurlyandskaya, I. P.

    2014-09-15

    To demonstrate controlling the electron temperature in nonlocal plasma, experiments have been performed on a short (without positive column) dc glow discharge with a cold cathode by applying different voltages to the conducting discharge wall. The experiments have been performed for low-pressure noble gas discharges. The applied voltage can modify trapping the energetic electrons emitted from the cathode sheath and arising from the atomic and molecular processes in the plasma within the device volume. This phenomenon results in the energetic electrons heating the slow plasma electrons, which consequently modifies the electron temperature. Furthermore, a numerical model of the discharge has demonstrated the electron temperature modification for the above case.

  20. Rf glow discharge optical emission spectrometry for the analysis of arrays of Ni nanowires in nanoporous alumina and titania membranes

    NASA Astrophysics Data System (ADS)

    Prida, V. M.; Navas, D.; Pirota, K. R.; Hernandez-Velez, M.; Menéndez, A.; Bordel, N.; Pereiro, R.; Sanz-Medel, A.; Hernando, B.; Vazquez, M.

    2006-05-01

    Anodic alumina (Al2O3) and titania (TiO2) nanoporous oxide membranes are among the most widely studied self-organized nanopore templates, formed by uniform and well aligned arrays of synthetized nanometric pores or tubes. Here, we perform a comparative study of the depth profiling analysis in self-ordered alumina and titania nanoporous membrane templates by means of the radiofrequency glow discharge coupled to optical emission spectrometry (rf-GD-OES) technique. The densely packed columnar arrays of hexagonally self-ordered nanoporous alumina membranes investigated, with an average inner pore diameter of 35 nm and 105 nm interspacing, give an uniform thickness pore length about more than 5 μm, depending on the anodization time. Meanwhile, the analysis of the anodized titania nanotubes, with an average inner pore diameter of 100 nm and 40 nm wall thickness, shown to be about 300 nm in length. Each type of membranes were also studied in both cases, when the nanopores were empty and after filling with electrodeposited Ni. The direct analysis by rf-GD-OES reveals the ability of this technique to control the quality of these so synthesized nanocomposites formed by electrodeposited Ni nanowires into the alumina and titania nanoporous templates.

  1. Diagnostics of a nonlocal plasma of a short glow discharge with active boundaries

    NASA Astrophysics Data System (ADS)

    Demidov, Vladimir; Astafiev, Alexander; Gutsev, Sergie; Kudryavtsev, Anatoly; Zamchiy, Roman

    2013-10-01

    Short glow discharges have attracted interest of researchers. In such discharges, the gap is chosen such a way that the positive column with direct electron heating by electric field could not be formed. However, in contrast to the positive column, the properties of the plasmas of NG and FDS are poorly understood. In this work, experimental study of the short glow discharge in helium at different gas pressures and distances between the electrodes are performed. The short discharge has a positive differential characteristic. As a result the discharge is stable even without ballast resistance, which may be important for applications. Experiments confirm that the plasma of the short glow discharge is characterized by a low electron temperature and weak electric field. Since the dimensions of the NG are determined by energy of fast electrons produced in the cathode sheath, in atomic gases, the electron distribution function is nonlocal, i.e. different groups of electrons behave independently of each other (did not have time ``to mix due to collisions''). As the EDF is nonlocal, it allows measurement of the fast part of the EDF by application of measuring wall electrode. The results of measurements by Langmuir and wall probes are in good agreement. This work has been supported by SPbSU and FZP.

  2. Generation and Control of Electrolyte Cathode Atmospheric Glow Discharges using Miniature Gas Flow

    NASA Astrophysics Data System (ADS)

    Shirai, Naoki; Nakazawa, Masato; Ibuka, Shinji; Ishii, Shozo

    Stable electrolyte cathode atmospheric dc glow microdischarges were generated by using a miniature helium gas flow from a nozzle electrode in air. We developed two schemes to control the temporal evolution of the discharge and the interaction between the discharge column and the ambient air. The vaporization of electrolyte solutions takes place and affects the discharge characteristics. It takes time from the start of the discharge. Therefore the discharge was controlled by applying pulse modulated dc voltages. If the voltage was dropped down to zero before the vaporization, the gas discharge developed without the ionization of the components of solution. The helium gas discharge without air developed when the nozzle electrode was placed in a glass capillary. This was confirmed by examining the change in pH of the solution, which usually decreased owing to the generation of nitrogen oxides in the discharge in air.

  3. Controlled growth of aligned carbon nanotube using pulsed glow barrier discharge

    NASA Astrophysics Data System (ADS)

    Nozaki, Tomohiro; Kimura, Yoshihito; Okazaki, Ken

    2002-10-01

    We first achieved a catalytic growth of aligned carbon nanotube (CNT) using atmospheric pressure pulsed glow barrier discharge combined with DC bias (1000 V). Aligned CNT can grow with the directional electric field, and this is a big challenge in barrier discharges since dielectric barrier does not allow DC bias and forces to use AC voltage to maintain stable plasma conditions. To overcome this, we developed a power source generating Gaussian-shape pulses at 20 kpps with 4% duty, and DC bias was applied to the GND electrode where Ni-, Fe-coated substrate existed. With positive pulse, i.e. substrate was the cathode, random growth of CNT was observed at about 10^9 cm-2. Growth rate significantly reduced when applied negative pulse; Negative glow formation near substrate is essential for sufficient supply of radical species to the catalyst. If -DC was biased, aligned CNT with 20 nm was synthesized because negative bias enhanced negative glow formation. Interestingly, 2 to 3 CNTs stuck each other with +DC bias, resulting in 50-70 nm and non-aligned CNT. Atmospheric pressure glow barrier discharges can be highly controlled and be a potential alternative to vacuum plasmas for CVD, micro-scale, nano-scale fabrication.

  4. ULTRAVIOLET INDUCED MOTION OF A FLUORESCENT DUST CLOUD IN AN ARGON DIRECT CURRENT GLOW DISCHARGE PLASMA

    SciTech Connect

    Hvasta, M.G.; and Zwicker, A.

    2008-01-01

    Dusty plasmas consist of electrons, ions, neutrals and nm-μm sized particles commonly referred to as dust. In man-made plasmas this dust may represent impurities in a tokamak or plasma etching processing. In astrophysical plasmas this dust forms structures such as planetary rings and comet tails. To study dusty plasma dynamics an experiment was designed in which a 3:1 silica (<5 μm diameter) and fl uorescent dust mixture was added to an argon DC glow discharge plasma and exposed to UV radiation. This fl uorescent lighting technique offers an advantage over laser scattering (which only allows two-dimensional slices of the cloud to be observed) and is simpler than scanning mirror techniques or particle image velocimetry. Under typical parameters (P=150 mTorr, V anode= 100 V, Vcathode= -400 V, Itotal < 2mA) when the cloud is exposed to the UV light (100W, λ = 365 nm) the mixture fl uoresces, moves ~2mm towards the light source and begins rotating in a clockwise manner (as seen from the cathode). By calibrating a UV lamp and adjusting the relative intensity of the UV with a variable transformer it was found that both translational and rotational velocities are a function of UV intensity. Additionally, it was determined that bulk cloud rotation is not seen when the dust tray is not grounded while bulk translation is. This ongoing experiment represents a novel way to control contamination in man-made plasmas and a path to a better understanding of UV-bathed plasma systems in space..

  5. Growth of arc in high-pressure, pulsed glow discharge by gas density depletion

    NASA Astrophysics Data System (ADS)

    Imada, Go; Yatsui, Kiyoshi; Masuda, Wataru

    2000-10-01

    Effects of gas density depletion on arc formation of high-pressure, pulsed glow discharge have been investigated by eliminating the other factors which may affect the discharge stability, such as shock waves, residual ions, electrode heating, and discharge products. The gas density depletion has been simulated by utilizing a subsonic gas flow between the curved electrodes combined with a convergent nozzle and a divergent diffuser. A comparison has been made on the discharge in the aerodynamically created gas density depletion with the second discharge in the double-pulse discharge within a stable gas. We have found that the large gas density depletion, Δρ/ρ0˜-3.6% corresponding to a pulse repetition rate (PRR) of ˜50 Hz, tends to cause an arc-like filament or an arc without the shocks, ions, electrode heating, and products. However, the second discharge in the double-pulse discharge becomes an arc in much smaller gas density depletion (Δρ/ρ0˜-1.2% corresponding to PRR ˜3 Hz). Therefore, the collapse of high-pressure, pulsed glow discharge is most likely caused by some factor other than the gas density depletion.

  6. Signature of fast H atoms from cathode glow region of a dc discharge

    SciTech Connect

    Bharathi, P.; Suraj, K. S.; Prahlad, V.; Mukherjee, S.; Vasu, P.

    2009-05-15

    Asymmetric broadening of H{sub {alpha}} line from cathode glow region has been studied. In the cathode glow, mean energy and fractional population of very fast hydrogen atoms were found to be {approx}130 eV and {approx}55%, respectively. These values reduced to {approx}90 eV and {approx}20% when measured at negative glow region. The observed asymmetry was attributed to the presence of the fast hydrogen atoms near the cathode surface. The mean energy and number density of excited fast hydrogen atoms were estimated from the velocity distribution of H{sup +}, H{sub 2}{sup +}, and H{sub 3}{sup +} considering collisions inside the cathode sheath. The reduction in the mean energy and number density of the excited fast hydrogen atoms, at the other locations of the discharge, was explained by energy relaxation and thermalization of the neutrals with the background gas.

  7. A self-consistent particle model for the simulation of RF glow discharges

    SciTech Connect

    Trombley, H.W.; Terry, F.L. Jr.; Elta, M.E. . Dept. of Electrical Engineering and Computer Science)

    1991-04-01

    This paper reports on a self-consistent particle model of an argon RF glow discharge that has been developed. Electric field and charged-particle density profiles determined from simulations with the RF glow discharge model are consistent with results obtained from continuum models. The average ion energy is found to vary greatly between the bulk of the discharge and sheaths, contrary to the assumption that the ion energy is uniform, as is assumed in some continuum models. The accuracy of the particle cross sections and collision representation used in the model is verified with a simplified dc model which calculates swarm parameters. Electron swarm parameters determined with this model are in excellent agreement with experimental data taken from the literature.

  8. Hydrogen absorption behavior into boron films by glow discharges in hydrogen and helium

    NASA Astrophysics Data System (ADS)

    Tsuzuki, K.; Natsir, M.; Inoue, N.; Sagara, A.; Noda, N.; Motojima, O.; Mochizuki, T.; Hino, T.; Yamashina, T.

    1997-02-01

    Hydrogen absorption behavior into boron films deposited on graphite and stainless steel (SS) has been studied. Hydrogen absorption into a H-depleted boron film was investigated during a hydrogen glow discharge with pressure drop measured by a diaphragm gauge. It was found that, after strong but short time absorption at initial phase, hydrogen atoms were slowly (a few percents of injected H atoms) but continuously absorbed without saturation up to 3 h, which was not observed with SS liner without boron coating. Hydrogen atoms were not only desorbed but also implanted into the film during a helium glow discharge and thus, hydrogen atoms were accumulated in the film when H 2 and He discharges were repeated alternately. These accumulation effects enhanced by ions from the glow discharge were investigated quantitatively and the effect of bombarding ion species (H + or He +) was discussed. Depth profile of H atoms was measured by elastic recoil detection (ERD). The density of only near surface region was increased when the hydrogen atoms were injected. Longer time exposure to H 2 discharge resulted in increase in surface density and shift of the peak position to deeper into the film. These results were explained by diffusion of H atoms due to ion impact into the films with keeping its saturation level if we consider resolution of ERD method of 25 nm. From the results, applicability of boron film as protection layer of tritium permeation is discussed.

  9. Atmospheric pressure glow discharge deposition of thermo-sensitive poly (N-isopropylacrylamide)

    NASA Astrophysics Data System (ADS)

    Shao, M.; Tang, X. L.; Wen, D.; Chen, Y.; Qiu, G.

    2013-12-01

    In this paper, a self-made atmospheric pressure dielectric barrier discharge reactor on intermediate frequency is brought forward and developed, which is equipped with power supply of 1-20 KHz, and the working gas is argon. The experimental results show that is a very stable and uniform atmospheric pressure glow discharge (APGD). Through a series of experiments, the waveforms of single pulse and multi-pulse glow discharge were both obtained. The voltage amplitude, discharge gap and dielectric material are studied, and the conditions of multi-pulse glow discharge are discussed as well. The novel methods of depositing poly (N-isopropylacrylamide) (PNIPAAm) coatings on the surface of glass slides and PS petri dish are provided by atmospheric pressure plasma polymerization. PNIPAAm can be obtained by plasma polymerization of N-isopropylacrylamide using the self-made equipment of atmospheric pressure plasma vapor treatment. The samples were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and water contact angle. SEM analysis has revealed that the PNIPAAm coatings were formed on the surface of the smooth glass slides. Further evaluation by using XPS, it has shown the presence of PNIPAAm. The wettability can be significantly modified by changing of the temperatures at above and below of the lower critical solution temperature (LCST) from the data of the contact angle test. These results have advantage for further application on the thermo-sensitive textile materials.

  10. A study of the glow discharge characteristics of contact electrodes at atmospheric pressure in air

    SciTech Connect

    Liu, Wenzheng Sun, Guangliang Li, Chuanhui; Zhang, Rongrong

    2014-04-15

    Electric field distributions and discharge properties of rod-rod contact electrodes were studied under the condition of DBD for the steady generation of atmospheric pressure glow discharge plasma (APGD) in air. We found that under the effect of the initial electrons generated in a nanometer-scale gap, the rod-rod cross-contact electrodes yielded APGD plasma in air. Regarding the rod-rod cross-contact electrodes, increasing the working voltage expanded the strong electric field area of the gas gap so that both discharge area and discharge power increased, and the increase in the number of contact points kept the initial discharge voltage unchanged and caused an increase in the plasma discharge area and discharge power. A mesh-like structure of cross-contact electrodes was designed and used to generate more APGD plasma, suggesting high applicability.

  11. Prediction of atmospheric pressure glow discharge in dielectric-barrier system

    NASA Astrophysics Data System (ADS)

    Duan, Xiaoxi; He, Feng; Ouyang, Jiting

    2010-06-01

    A one-dimensional fluid model was used to investigate the breakdown mechanism and discharge mode in dielectric-barrier system. The results show that the dielectric barrier discharge mode depends strongly on the gas property (i.e., the electron multiplication). The atmospheric pressure dielectric barrier glow discharge could only be achieved in a gas (e.g., noble gas) in which the first Townsend ionization coefficient is sufficiently small and the electron multiplication does not rise up rapidly with the electric field, while could not be sustained in the gas (e.g., N2 and O2) in which the electron multiplication is sensitive to the field.

  12. Spectral Evidence for Ionization in Air-Filled Glow Discharge Tubes: Application to Sprites

    NASA Astrophysics Data System (ADS)

    Armstrong, R. A.; Williams, E. R.; Golka, R. K.; Williams, D. R.

    2001-12-01

    The question of ionization in sprites and the evidence for VLF backscatter from sprites has motivated a quantitative spectral analysis of the various (classical) regions of the glow discharge tube under DC excitation and at air densities appropriate for sprites in the mesosphere. A PR-650 colorimeter (Photo Research, Inc.) has enabled calibrated irradiance measurements for localized zones along the axis of the discharge tube--in the dominantly blue negative glow, in the Faraday dark space and in the red/pink positive column. Consistent with historical nomenclature, nitrogen first and second positive emission is dominant in the positive column (associated with neutral N2), and nitrogen first negative emission, with a prominent peak at 4278 A, is dominant in the blue negative glow (associated with ionized N2+). Whereas nitrogen first and second positive emission are also detected in the negative glow, no spectral evidence for ionization (no 4279, no 3914, no Meinel) is found in the red/pink positive column. This negative result is attributed not to an absence of ionization in the positive column, but rather to a sparse population of N2+ relative to neutral nitrogen in this region, and to the prominent emission in the blue part of the spectrum due to nitrogen second positive. A similar interpretation may be appropriate for the time-integrated spectra from the red body of sprites, also lacking direct evidence for ionization.

  13. Features of plasma glow in low pressure terahertz gas discharge

    NASA Astrophysics Data System (ADS)

    Bratman, V. L.; Golubev, S. V.; Izotov, I. V.; Kalynov, Yu. K.; Koldanov, V. A.; Litvak, A. G.; Razin, S. V.; Sidorov, A. V.; Skalyga, V. A.; Zorin, V. G.

    2013-12-01

    Investigations of the low pressure (1-100 Torr) gas discharge in the powerful (1 kW) quasi-optical terahertz (0.55 THz) wave beams were made. An intense afterglow was observed after the end of gyrotron terahertz radiation pulse. Afterglow duration significantly exceeded radiation pulse length (8 μs). This phenomenon could be explained by the strong dependence of the collisional-radiative recombination rate (that is supposed to be the most likely mechanism of electron losses from the low pressure terahertz gas discharge) on electron temperature.

  14. Features of plasma glow in low pressure terahertz gas discharge

    SciTech Connect

    Bratman, V. L.; Golubev, S. V.; Izotov, I. V.; Kalynov, Yu. K.; Koldanov, V. A.; Razin, S. V.; Litvak, A. G.; Sidorov, A. V.; Skalyga, V. A.; Zorin, V. G.

    2013-12-15

    Investigations of the low pressure (1–100 Torr) gas discharge in the powerful (1 kW) quasi-optical terahertz (0.55 THz) wave beams were made. An intense afterglow was observed after the end of gyrotron terahertz radiation pulse. Afterglow duration significantly exceeded radiation pulse length (8 μs). This phenomenon could be explained by the strong dependence of the collisional-radiative recombination rate (that is supposed to be the most likely mechanism of electron losses from the low pressure terahertz gas discharge) on electron temperature.

  15. Comparative Study of Electric Field Measurement in Glow Discharges using Laser Optogalvanic Spectroscopy

    SciTech Connect

    Hussain, Shahid; Saleem, M.; Baig, M. A.

    2008-10-22

    The net electric field inside low-pressure glow discharges has been measured using laser optogalvanic spectroscopy of 1s2s {sup 1}S{sub 0}{yields}np{sup 1}P{sub 1} Rydberg series of atomic helium. Three different types of discharges, an inductively coupled RF discharge cell operating at 4 MHz, a homemade DC discharge cell and a commercial see-through hollow cathode lamp have been used for these studies. The Rydberg series terminates earlier in the high electric field discharge as compared to that in the low electric field discharge. The net electric field also produces shift and broadens the observed spectral lines especially in the high lying Rydberg transitions. The electric field has been determined from the series termination and also from the energy shift of the observed transitions.

  16. Isotope effects on desorption kinetics of hydrogen isotopes implanted into stainless steel by glow discharge

    SciTech Connect

    Matsuyama, M.; Kondo, M.; Noda, N.; Tanaka, M.; Nishimura, K.

    2015-03-15

    In a fusion device the control of fuel particles implies to know the desorption rate of hydrogen isotopes by the plasma-facing materials. In this paper desorption kinetics of hydrogen isotopes implanted into type 316L stainless steel by glow discharge have been studied by experiment and numerical calculation. The temperature of a maximum desorption rate depends on glow discharge time and heating rate. Desorption spectra observed under various experimental conditions have been successfully reproduced by numerical simulations that are based on a diffusion-limited process. It is suggested, therefore, that desorption rate of a hydrogen isotope implanted into the stainless steel is limited by a diffusion process of hydrogen isotope atoms in bulk. Furthermore, small isotope effects were observed for the diffusion process of hydrogen isotope atoms. (authors)

  17. Boundary Layer Flow Control with a One Atmosphere Uniform Glow Discharge Surface Plasma

    NASA Technical Reports Server (NTRS)

    Roth, J. Reece; Sherman, Daniel M.; Wilkinson, Stephen P.

    1998-01-01

    Low speed wind tunnel data have been acquired for planar panels covered by a uniform, glow-discharge surface plasma in atmospheric pressure air known as the One Atmosphere Uniform Glow Discharge Plasma (OAUGDP). Streamwise and spanwise arrays of flush, plasma-generating surface electrodes have been studied in laminar, transitional, and fully turbulent boundary layer flow. Plasma between symmetric streamwise electrode strips caused large increases in panel drag, whereas asymmetric spanwise electrode configurations produced a significant thrust. Smoke wire flow visualization and mean velocity diagnostics show the primary cause of the phenomena to be a combination of mass transport and vortical structures induced by strong paraelectric ElectroHydroDynamic (EHD) body forces on the flow.

  18. Surface modification of PDMS using atmospheric glow discharge polymerization of tetrafluoroethane for immobilization of biomolecules

    NASA Astrophysics Data System (ADS)

    Anand, V.; Ghosh, S.; Ghosh, M.; Rao, G. M.; Railkar, R.; Dighe, R. R.

    2011-08-01

    In this study an atmospheric glow discharge with a fluorocarbon gas as precursor was used to modify the surface of polydimethyl siloxane (PDMS -[(CH 3) 2SiO] n-). The variation in protein immobilizing capability of PDMS was studied for different times of exposure. It was observed that the concentration of proteins adsorbed on the surface varied in an irregular manner with treatment time. The fluorination results in the formation of a thin film of fluorocarbon on the PDMS surface. The AFM and XPS data suggest that the film cracks due to stress and regains its uniformity thereafter. This Stranski-Krastanov growth model of the film was due to the high growth rate offered by atmospheric glow discharge.

  19. Plasma Treatment of Polyethylene Powder Particles in Hollow Cathode Glow Discharge

    SciTech Connect

    Wolter, Matthias; Quitzau, Meike; Bornholdt, Sven; Kersten, Holger

    2008-09-07

    Polyethylen (PE) is widely used in the production of foils, insulators, packaging materials, plastic bottles etc. Untreated PE is hydrophobic due to its unpolar surface. Therefore, it is hard to print or glue PE and the surface has to be modified before converting.In the present experiments a hollow cathode glow discharge is used as plasma source which is mounted in a spiral conveyor in order to ensure a combines transport of PE powder particles. With this set-up a homogeneous surface treatment of the powder is possible while passing the glow discharge. The plasma treatment causes a remarkable enhancement of the hydrophilicity of the PE powder which can be verified by contact angle measurements and X-ray photoelectron spectroscopy.

  20. COATING AND MANDREL EFFECTS ON FABRICATION OF GLOW DISCHARGE POLYMER NIF SCALE INDIRECT DRIVE CAPSULES

    SciTech Connect

    NIKROO,A; PONTELANDOLFO,JM; CASTILLO,ER

    2002-04-01

    OAK A271 COATING AND MANDREL EFFECTS ON FABRICATION OF GLOW DISCHARGE POLYMER NIF SCALE INDIRECT DRIVE CAPSULES. Targets for the National Ignition Facility (NIF) need to be about 200 {micro}m thick and 2 mm in diameter. These dimensions are well beyond those currently fabricated on a routine basis. They have investigated fabrication of near NIF scale targets using the depolymerizable mandrel technique. Poly-alpha-methylstyrene (PAMS) mandrels, about 2 mm in diameter, of varying qualities were coated with as much as 125 {micro}m of glow discharge polymer (GDP). The surface finish of the final shells was examined using a variety of techniques. A clear dependence of the modal spectrum of final GDP shell on the quality of the initial PAMS mandrels was observed. isolated features were found to be the greatest cause for a shell not meeting the NIF standard.

  1. Electrical Characterization of an RF Glow Discharge at Room Pressure

    SciTech Connect

    Perez-Martinez, J. A.; Piedad-Beneitez, A. de la; Pena-Eguiluz, R.; Mercado-Cabrera, A.; Valencia A, R.; Barocio, S. R.; Lopez-Callejas, R.; Godoy-Cabrera, O. G.; Benitez-Read, J. S.; Pacheco-Sotelo, J. O.

    2006-12-04

    A non-thermal atmospheric-like plasma source able to operate at room temperature represents, by its physical nature, a considerable potential for biological applications, given its highly accurate action and extremely controllable penetration on the surface of biological tissue. As we start up a research line into this technology, we report the electrical characterization of a room pressure plasma discharge by means of a coupling network model. The discharge is produced by a 13.56MHz commercial generator. As it is impossible to measure directly its state variables (voltage and current intensity) due to the considerable perturbation created by introducing a low impedance at the system output, then an indirect estimation of such variables is achieved from experimental diagnostics at the input, so to validate the proposed electrical model.

  2. Dust structurization observed in a dc glow discharge dusty plasma

    NASA Astrophysics Data System (ADS)

    Heinrich, Jonathon R.; Kim, Su-Hyun; Merlino, Robert L.

    2010-11-01

    Dusty plasmas, which are inherently open systems which require an ionization source to replenish the plasma absorbed on the grains, tend to exhibit self-organization. Various structures have been observed in dusty plasmas such as dust crystals, voids, and vortices. Due to the presence of drifting ions in dc discharge plasmas, spontaneously excited dust acoustic waves are also a common occurrence. By adjusting the discharge parameters we have observed a new phenomenon in dusty plasmas -- the spontaneous formation of three-dimensional stationary dust density structures. These structures appear as an ordered pattern consisting of alternating regions of high and low dust density arranged in a nested bowl-type configuration The stationary structure evolves from dust density waves that slow down as their wavelength decreases and eventually stop moving when the wavelength reaches some minimum size.

  3. Positive column of the glow discharge in argon

    NASA Astrophysics Data System (ADS)

    Lisovskiy, Valeriy; Artushenko, Ekaterina; Yegorenkov, Vladimir

    2015-09-01

    We report the measurements we performed of the reduced electric field strength E / p in the positive column in the range of the gas pressure and tube radius product of 0.01 discharge in noble gases. We consider the case of a balance between the rate of charged particle production due to direct ionization of gas molecules through electron impact and their escape to the discharge tube walls. Simple expressions for the reduced electric field E / p in the positive column in argon are obtained. The second model consists in considering the production and loss of charged particles and metastable atoms and obtaining a simple equation for the reduced electric field E / p depending on the discharge current density, gas pressure and tube radius. These models furnish a good description of experimental data in the whole range of pR values studied. and Scientific Center of Physical Technologies, Svobody Sq.6, Kharkov, 61022, Ukraine.

  4. Microstructure and biocompatibility of titanium oxides produced on nitrided surface layer under glow discharge conditions.

    PubMed

    Czarnowska, E; Morgiel, J; Ossowski, M; Major, R; Sowinska, A; Wierzchon, T

    2011-10-01

    The disadvantages of titanium implants are their low wear resistance and the release of titanium elements into surrounding tissue. These can be eliminated by modifying the surface by surface engineering methods, among them nitriding under glow discharge conditions which allow to produce diffusive surface layers. Their combining with an oxide layer might be valuable for biological events occurring at the bone implant interface. The aim of this study was to enhance the titanium biomaterial performance via combining nitriding and oxidizing treatments in one process under glow discharge conditions. The oxynitrided surface layers were produced at 680 degrees C. The obtained layer was TiO + TiN + Ti2N + alphaTi(N) type and about 4-microm thick and was of diffusive character. This layer significantly increased wear resistance and slightly corrosion resistance compared to that of the reference titanium alloy. The produced titanium oxide was about 400-nm thick and built from fine crystallites. This oxide exhibits bioactivity in SBF (simulated body fluid). Osteoblasts of Saos-2 line incubated on this surface exhibited good adhesion and proliferation and ALP release comparable with cells cultured on the reference titanium alloy and TiN + Ti2N + alphaTi(N) surface layers. A quantitative analysis of blood platelets adhering to this layer revealed their highest amount in comparison to that on both the nitrided surface layer and titanium alloy. The presented study provided a simple and reproducible method of combining oxidizing and nitriding under glow discharge in one process. Experimental data in vitro suggests that titanium alloy oxynitriding under low temperatures at glow discharge conditions improves titanium alloy properties and biocompatibility and tissue healing. Therefore, the layer of TiO + TiN +Ti2N + alphaTi(N) type could be valuable for long-term bone implants. PMID:22400281

  5. Dynamic of the Dust Structures under Magnetic Field Effect in DC Glow Discharges

    SciTech Connect

    Vasiliev, M. M.; D'yachkov, L. G.; Antipov, S. N.; Petrov, O. F.; Fortov, V. E.

    2008-09-07

    In this work, we investigate dust structures in the striation of DC glow discharges under magnetic field actions. The dependence of rotation frequency of dusty plasma structures as a function of the magnetic field was investigated. For various magnetic fields kinetic temperatures of the dust particles, diffusion coefficients, and effective coupling coefficient {gamma}* have been determined. Obtained results are analyzed and compared with theoretical predictions.

  6. Accumulation and evolution of the spatial distribution of radicals in vitreous propanol in a glow discharge

    SciTech Connect

    Kurshev, V.V.; Raitsimring, A.M.

    1992-09-01

    Analysis of the dipole broadening of an EPR line is used to explain the change in the spatial distribution of radicals formed in the plasma of a high-frequency glow discharge on the surface of vitreous propanol, which contains an electron acceptor. The contributions of various mechanisms for radical formation are evaluated. A model is proposed to describe both the accumulation and the evolution of the stabilization region of radicals in the plasmolysis process. 13 refs., 4 figs.

  7. Elimination of stick-slip of elastomeric sutures by radiofrequency glow discharge deposited coatings.

    PubMed

    Griesser, H J; Chatelier, R C; Martin, C; Vasic, Z R; Gengenbach, T R; Jessup, G

    2000-01-01

    Fine elastomeric sutures intended for cardiovascular surgery can exhibit "stick-slip" behavior as they are pulled through tissue; the resulting oscillatory force can damage delicate tissue or cause sutures to snap. To eliminate this undesirable effect, sutures were surface-modified using a radiofrequency glow discharge in a vapor of either hexamethyldisiloxane or hexamethyldisilazane, to produce a thin polymeric coating on the suture. The same coatings were also deposited onto aluminized tape to facilitate their characterization by measurement of air/water contact angles and by X-ray photoelectron spectroscopy. Coatings from both monomers were found to be very hydrophobic. The hexamethyldisiloxane glow discharge coatings underwent negligible oxidation when stored in air, and thus remained stable over a shelf-life period akin to what may be required of sutures. The hexamethyldisilazane glow discharge coatings, in contrast, incorporated substantial amounts of oxygen over a 3-month period. The coatings did not measurably alter the tensile properties of the sutures. The frictional properties of coated sutures were assessed by measuring the dynamic friction between the suture and ovine myocardium. Both coatings were effective in removing the inherent stick-slip behavior of polybutester sutures in this model. The coatings remained intact after several passes and proved to be robust and efficacious under various strain regimes. PMID:10813763

  8. Atmospheric sampling glow discharge ionizataion and triple quadrupole tandem mass spectrometry for explosives vapor detection

    SciTech Connect

    McLuckey, S.A.; Goeringer, D.E.; Asano, K.G.; Hart, K.J.; Glish, G.L.; Grant, B.C.; Chambers, D.M.

    1993-08-01

    The detection and identification of trace vapors of hidden high explosives is an excellent example of a targeted analysis problem. It is desirable to push to ever lower levels the quantity or concentration of explosives material that provides an analytical signal, while at the same time discriminating against all other uninteresting material. The detection system must therefore combine high sensitivity with high specificity. This report describes the philosophy behind the use of atmospheric sampling glow discharge ionization, which is a sensitive, rugged, and convenient means for forming anions from explosives molecules, with tandem mass spectrometry, which provides unparalleled specificity in the identification of explosives-related ions. Forms of tandem mass spectrometry are compared and contrasted to provide a summary of the characteristics to be expected from an explosives detector employing mass spectrometry/mass spectrometry. The instrument developed for the FAA, an atmospheric sampling glow discharge/triple quadrupole mass spectrometer, is described in detail with particular emphasis on the ion source/spectrometer interface and on the capabilities of the spectrometer. Performance characteristics of the system are also described as they pertain to explosives of interest including a description of an automated procedure for the detection and identification of specific explosives. A comparison of various tandem mass spectrometers mated with atmospheric sampling glow discharge is then described and preliminary studies with a vapor preconcentration system provided by the FAA will be described.

  9. Mechanism behind self-sustained oscillations in direct current glow discharges and dusty plasmas

    SciTech Connect

    Cho, Sung Nae

    2013-04-15

    An alternative explanation to the mechanism behind self-sustained oscillations of ions in direct current (DC) glow discharges is provided. Such description is distinguished from the one provided by the fluid models, where oscillations are attributed to the positive feedback mechanism associated with photoionization of particles and photoemission of electrons from the cathode. Here, oscillations arise as consequence of interaction between an ion and the surface charges induced by it at the bounding electrodes. Such mechanism provides an elegant explanation to why self-sustained oscillations occur only in the negative resistance region of the voltage-current characteristic curve in the DC glow discharges. Furthermore, this alternative description provides an elegant explanation to the formation of plasma fireballs in the laboratory plasma. It has been found that oscillation frequencies increase with ion's surface charge density, but at the rate which is significantly slower than it does with the electric field. The presented mechanism also describes self-sustained oscillations of ions in dusty plasmas, which demonstrates that self-sustained oscillations in dusty plasmas and DC glow discharges involve common physical processes.

  10. Influence of Forbidden Processes on Similarity Law in Argon Glow Discharge at Low Pressure

    NASA Astrophysics Data System (ADS)

    Fu, Yang-Yang; Luo, Hai-Yun; Zou, Xiao-Bing; Wang, Xin-Xin

    2014-07-01

    The similarity law of gas discharge is not always valid due to the occurrence of some elementary processes, such as the stepwise ionization process, which are defined as the forbidden processes. To research the influence of forbidden processes on the similarity law, physical parameters (i.e., the electric field, electron density, electron temperature) in similar gaps are investigated based on the fluid model of gas discharge. The products of gas pressure p and dimensions are kept to be constant in similar gaps and the discharge model is solved with and without the forbidden processes, respectively. Discharges in similar gaps are identified as glow discharges and the typical similarity relations all are investigated. The results show that the forbidden processes cause significant deviations of similarity relations from the theoretical ones and the deviations are enlarged as the scaled-down factor k increases. If the forbidden processes are excluded from the model, the similarity law will be valid in argon glow discharge at low pressure.

  11. Dynamic model based on voltage transfer curve for pattern formation in dielectric barrier glow discharge

    SciTech Connect

    Li, Ben; He, Feng; Ouyang, Jiting; Duan, Xiaoxi

    2015-12-15

    Simulation work is very important for understanding the formation of self-organized discharge patterns. Previous works have witnessed different models derived from other systems for simulation of discharge pattern, but most of these models are complicated and time-consuming. In this paper, we introduce a convenient phenomenological dynamic model based on the basic dynamic process of glow discharge and the voltage transfer curve (VTC) to study the dielectric barrier glow discharge (DBGD) pattern. VTC is an important characteristic of DBGD, which plots the change of wall voltage after a discharge as a function of the initial total gap voltage. In the modeling, the combined effect of the discharge conditions is included in VTC, and the activation-inhibition effect is expressed by a spatial interaction term. Besides, the model reduces the dimensionality of the system by just considering the integration effect of current flow. All these greatly facilitate the construction of this model. Numerical simulations turn out to be in good accordance with our previous fluid modeling and experimental result.

  12. Dynamic model based on voltage transfer curve for pattern formation in dielectric barrier glow discharge

    NASA Astrophysics Data System (ADS)

    Li, Ben; He, Feng; Duan, Xiaoxi; Ouyang, Jiting

    2015-12-01

    Simulation work is very important for understanding the formation of self-organized discharge patterns. Previous works have witnessed different models derived from other systems for simulation of discharge pattern, but most of these models are complicated and time-consuming. In this paper, we introduce a convenient phenomenological dynamic model based on the basic dynamic process of glow discharge and the voltage transfer curve (VTC) to study the dielectric barrier glow discharge (DBGD) pattern. VTC is an important characteristic of DBGD, which plots the change of wall voltage after a discharge as a function of the initial total gap voltage. In the modeling, the combined effect of the discharge conditions is included in VTC, and the activation-inhibition effect is expressed by a spatial interaction term. Besides, the model reduces the dimensionality of the system by just considering the integration effect of current flow. All these greatly facilitate the construction of this model. Numerical simulations turn out to be in good accordance with our previous fluid modeling and experimental result.

  13. Dusty Plasma in He-Ar Glow Discharge

    SciTech Connect

    Maiorov, S. A.; Ramazanov, T. S.; Dzhumagulova, K. N.; Dosbolayev, M. K.; Jumabekov, A. N.

    2008-09-07

    The paper reports on the first experiments with plasma-dust formations in dc gas discharge plasma for He-Ar mixture. It is shown that under the conventional conditions of the experiments with dusty structures in plasma, the choice of light and heavy gases for the mixture suppresses electron heating in electric field and results in a supersonic jet with high Mach numbers. Distribution functions for drifting ions in the gas mixture are calculated for various mixture concentrations, electric field strengths and gas pressures.

  14. On the mechanism of pattern formation in glow dielectric barrier discharge

    NASA Astrophysics Data System (ADS)

    Qiao, Yajun; Li, Ben; Ouyang, Jiting

    2016-01-01

    The formation mechanism of pattern in glow dielectric barrier discharge is investigated by two-dimensional fluid modeling. Experimental results are shown for comparison. The simulation results show that the non-uniform distribution of space charges makes the discharge be enhanced in the high-density region but weakened in its neighborhood, which is considered as an activation-inhibition effect. This effect shows through during a current pulse (one discharge event) but also in a certain period of time after discharge that determines a driving frequency range for the non-uniformity of space charges to be enhanced. The effects of applied voltage, surface charge, electrode boundary, and external field are also discussed. All these factors affect the formation of dielectric-barrier-discharge pattern by changing the distribution or the dynamics of space charges and hence the activation-inhibition effect of non-uniform space charges.

  15. A study of the glow discharge plasma jet of the novel Hamburger-electrode

    NASA Astrophysics Data System (ADS)

    Liu, Wenzheng; Ma, Chuanlong; Yang, Xiao; Cui, Weisheng; Chen, Xiuyang

    2016-08-01

    To generate atmospheric pressure glow discharge plasma jets (APGDPJs), a novel Hamburger-electrode was proposed. Through the study on electric field distributions, flow field distributions, and characteristics of the discharge and jet, we found that adopting the mode of dielectric barrier discharge with non-uniform thickness of dielectric, it was easy to form the strong electric field areas which were conducive to generate discharge and electric field distributions with large electric field intensity in the narrow gap and weak electric field intensity in the wide gap that were not inclined to form a filament discharge. Using the structure of evenly distributed inner electrodes, it was easy to weaken the pressure of strong electric field areas and form flow field distributions which is beneficial for taking out the high density charged particles and generating APGDPJs. Stable APGDPJs in nitrogen with 3.5 mm in diameter and 9 mm in length were formed by using the novel Hamburger-electrode.

  16. Atmospheric pressure arc discharge with ablating graphite anode

    SciTech Connect

    Nemchinsky, V. A.; Raitses, Y.

    2015-05-18

    The anodic carbon arc discharge is used to produce carbon nanoparticles. Recent experiments with the carbon arc at atmospheric pressure helium demonstrated the enhanced ablation rate for narrow graphite anodes resulting in high deposition rates of carbonaceous products on the copper cathode (Fetterman et al 2008 Carbon 46 1322–6). The proposed model explains these results with interconnected steady-state models of the cathode and the anode processes. When considering cathode functioning, the model predicts circulation of the particles in the near-cathode region: evaporation of the cathode material, ionization of evaporated atoms and molecules in the near-cathode plasma, return of the resulting ions to the cathode, surface recombination of ions and electrons followed again by cathode evaporation etc. In the case of the low anode ablation rate, the ion acceleration in the cathode sheath provides the major cathode heating mechanism. In the case of an intensive anode ablation, an additional cathode heating is due to latent fusion heat of the atomic species evaporated from the anode and depositing at the cathode. Using the experimental arc voltage as the only input discharge parameter, the model allows us to calculate the anode ablation rate. A comparison of the results of calculations with the available experimental data shows reasonable agreement.

  17. Potential Industrial Applications of the One Atmosphere Uniform Glow Discharge Plasma (OAUGDP) Operating in Ambient Air

    NASA Astrophysics Data System (ADS)

    Reece Roth, J.

    2004-11-01

    The majority of industrial plasma processing with glow discharges has been conducted at pressures below 10 torr. This tends to limit applications to high value workpieces as a result of the high capital cost of vacuum systems and the production constraints of batch processing. It has long been recognized that glow discharge plasmas would play a much larger industrial role if they could be generated at one atmosphere. The One Atmosphere Uniform Glow Discharge Plasma (OAUGDP), developed at the University of Tennessee's Plasma Sciences Laboratory, is a non-thermal RF plasma operating on displacement currents with the time-resolved characteristics of a classical low pressure DC normal glow discharge. As a glow discharge, the OAUGDP operates with maximum electrical efficiency at the Stoletow point, where the energy input per ion-electron pair is a minimum [1, 2]. Several interdisciplinary teams have investigated potential applications of the OAUGDP. These teams included collaborators from the UTK Textiles and Nonwovens Development Center (TANDEC), and the Departments of Electrical and Computer Engineering, Microbiology, and Food Science and Technology, as well as the NASA Langley Research Center. The potential applications of the OAUGDP have all been at one atmosphere and room temperature, using air as the working gas. These applications include sterilizing medical and dental equipment; sterilizable air filters to deal with the "sick building syndrome"; removal of soot from Diesel engine exhaust; subsonic plasma aerodynamic effects, including flow re-attachment to airfoils and boundary layer modification; electrohydrodynamic (EDH) flow control of working gases; increasing the surface energy of materials; improving the adhesion of paints and electroplated layers: improving the wettability and wickability of fabrics; stripping of photoresist; and plasma deposition and directional etching of potential microelectronic relevance. [1] J. R. Roth, Industrial Plasma Engineering

  18. Charge mitigation techniques using glow and corona discharges for advanced gravitational wave detectors

    NASA Astrophysics Data System (ADS)

    Campsie, P.; Cunningham, L.; Hendry, M.; Hough, J.; Reid, S.; Rowan, S.; Hammond, G. D.

    2011-11-01

    Charging of silica test masses in gravitational wave detectors could potentially become a significant low-frequency noise source for advanced detectors. Charging noise has already been observed and confirmed in the GEO600 detector and is thought to have been observed in one of the LIGO detectors. In this paper, two charge mitigation techniques using glow and corona discharges were investigated to create repeatable and robust procedures. The glow discharge procedure was used to mitigate charge under vacuum and would be intended to be used in the instance where an optic has become charged while the detector is in operation. The corona discharge procedure was used to discharge samples at atmospheric pressure and would be intended to be used to discharge the detector optics during the cleaning of the optics. Both techniques were shown to reduce both polarities of surface charge on fused silica to a level that would not limit advanced LIGO. Measurements of the transmission of samples that had undergone the charge mitigation procedures showed no significant variation in transmission, at a sensitivity of ~ 200 ppm, in TiO2-doped Ta2O5/SiO2 multi-layer coated fused silica.

  19. Glow discharge plasma treatment for surface cleaning and modification of metallic biomaterials.

    PubMed

    Aronsson, B O; Lausmaa, J; Kasemo, B

    1997-04-01

    Glow discharge plasma treatment is a frequently used method for cleaning, preparation, and modification of biomaterial and implant surfaces. The merits of such treatments are, however, strongly dependent on the process parameters. In the present work the possibilities, limitations, and risks of plasma treatment for surface preparation of metallic materials are investigated experimentally using titanium as a model system, and also discussed in more general terms. Samples were treated by different low-pressure direct current plasmas and analyzed using Auger electron spectroscopy (AES), x-ray photoelectron spectroscopy (XPS), atomic force microscopy, scanning electron microscopy, and light microscopy. The plasma system is a home-built, ultra-high vacuum-compatible system that allows sample introduction via a load-lock, and precise control of pressure, gas composition and flow rate, etc. This system allows uniform treatment of cylindrical and screw-shaped samples. With appropriate plasma parameters, argon plasma remove all chemical traces from former treatments (adsorbed contaminants and other impurities, and native oxide layers), in effect producing cleaner and more well-controlled surfaces than with conventional preparation methods. Removal (sputtering) rates up to 30 nm/min are possible. However, when inappropriate plasma parameters are used, the result may be increased contamination and formation of unintentional or undesired surface layers (e.g., carbides and nitrides). Plasma-cleaned surfaces provide a clean and reproducible starting condition for further plasma treatments to form well-controlled surface layers. Oxidation in pure O2 (thermally or in oxygen plasmas) results in uniform and stoichiometric TiO2 surface oxide layers of reproducible composition and thicknesses in the range 0.5-150 nm, as revealed by AES and XPS analyses. Titanium nitride layers were prepared by using N2 plasmas. While mild plasma treatments leave the surface microstructure unaffected

  20. Transitions between corona, glow, and spark regimes of nanosecond repetitively pulsed discharges in air at atmospheric pressure

    NASA Astrophysics Data System (ADS)

    Pai, David Z.; Lacoste, Deanna A.; Laux, Christophe O.

    2010-05-01

    In atmospheric pressure air preheated from 300 to 1000 K, the nanosecond repetitively pulsed (NRP) method has been used to generate corona, glow, and spark discharges. Experiments have been performed to determine the parameter space (applied voltage, pulse repetition frequency, ambient gas temperature, and interelectrode gap distance) of each discharge regime. In particular, the experimental conditions necessary for the glow regime of NRP discharges have been determined, with the notable result that there exists a minimum and maximum gap distance for its existence at a given ambient gas temperature. The minimum gap distance increases with decreasing gas temperature, whereas the maximum does not vary appreciably. To explain the experimental results, an analytical model is developed to explain the corona-to-glow (C-G) and glow-to-spark (G-S) transitions. The C-G transition is analyzed in terms of the avalanche-to-streamer transition and the breakdown field during the conduction phase following the establishment of a conducting channel across the discharge gap. The G-S transition is determined by the thermal ionization instability, and we show analytically that this transition occurs at a certain reduced electric field for the NRP discharges studied here. This model shows that the electrode geometry plays an important role in the existence of the NRP glow regime at a given gas temperature. We derive a criterion for the existence of the NRP glow regime as a function of the ambient gas temperature, pulse repetition frequency, electrode radius of curvature, and interelectrode gap distance.

  1. An investigation of short glow discharge in helium and the development of its applications for the analysis of gases

    NASA Astrophysics Data System (ADS)

    Sisoev, Sergey; Saifutdinov, Almaz; Kudryavtsev, Anatoly

    2015-11-01

    DC glow discharge is the subject of constant attention, because it is widely used in practical applications. However, the main object of study remained positive column, the negative glow area has not been fully studied. The main objective of this work was to investigate the short glow discharge in helium. In this work current-voltage characteristics of short glow discharge and probe were obtained. Plasma parameters in the negative glow at different discharge currents and gas pressures were measured. It is shown that the temperature of the core group of electrons in negative glow is low and amounts to a few tenths electronvolts. The concentration of the main groups of electrons is typical for this discharge. Electron energy distribution function was calculated by the method of double numerical differentiation. Features in the form of peaks were found in the ion part of EEDF. These peaks correspond to the electrons which were born as a result of Penning ionization. These peaks may be used for identification of gas mixture. This work was supported by Russian Science Foundation (project #14-19-00311).

  2. A brush-shaped air plasma jet operated in glow discharge mode at atmospheric pressure

    NASA Astrophysics Data System (ADS)

    Li, Xuechen; Bao, Wenting; Jia, Pengying; Di, Cong

    2014-07-01

    Using ambient air as working gas, a direct-current plasma jet is developed to generate a brush-shaped plasma plume with fairly large volume. Although a direct-current power supply is used, the discharge shows a pulsed characteristic. Based on the voltage-current curve and fast photography, the brush-shaped plume, like the gliding arc plasma, is in fact a temporal superposition of a moving discharge filament in an arched shape. During it moves away from the nozzle, the discharge evolves from a low-current arc into a normal glow in one discharge cycle. The emission profile is explained qualitatively based on the dynamics of the plasma brush.

  3. On the physical processes ruling an atmospheric pressure air glow discharge operating in an intermediate current regime

    SciTech Connect

    Prevosto, L. Mancinelli, B.; Chamorro, J. C.; Cejas, E.; Kelly, H.

    2015-02-15

    Low-frequency (100 Hz), intermediate-current (50 to 200 mA) glow discharges were experimentally investigated in atmospheric pressure air between blunt copper electrodes. Voltage–current characteristics and images of the discharge for different inter-electrode distances are reported. A cathode-fall voltage close to 360 V and a current density at the cathode surface of about 11 A/cm{sup 2}, both independent of the discharge current, were found. The visible emissive structure of the discharge resembles to that of a typical low-pressure glow, thus suggesting a glow-like electric field distribution in the discharge. A kinetic model for the discharge ionization processes is also presented with the aim of identifying the main physical processes ruling the discharge behavior. The numerical results indicate the presence of a non-equilibrium plasma with rather high gas temperature (above 4000 K) leading to the production of components such as NO, O, and N which are usually absent in low-current glows. Hence, the ionization by electron-impact is replaced by associative ionization, which is independent of the reduced electric field. This leads to a negative current-voltage characteristic curve, in spite of the glow-like features of the discharge. On the other hand, several estimations show that the discharge seems to be stabilized by heat conduction; being thermally stable due to its reduced size. All the quoted results indicate that although this discharge regime might be considered to be close to an arc, it is still a glow discharge as demonstrated by its overall properties, supported also by the presence of thermal non-equilibrium.

  4. A Study on Helium Glow Discharge Cleaning in the HL-1M Tokamak

    NASA Astrophysics Data System (ADS)

    Wang, Zhi-wen; Yan, Dong-hai; Wang, En-yao

    2002-12-01

    Based on the principle of ion-bombarded reemission and sputtering desorption, the Glow Discharge Cleaning with helium (GDC(He)) is an effective method for controlling the recycle of H on the chamber wall, Carbon (C), Oxygen (O) impurity and improving the wall conditioning in HL-1M tokamak. It is characterized by simplicity without magnet and safety, compared with Taylor Discharge Cleaning (TDC), Alternating current glow discharge Cleaning (AC), Electron Cyclotron Resonance-Discharge Cleaning (ECR-DC). Compared with bake-out degassing, the wall has a higher degassing rate during GDC(He) and a lower impurity concentration in vacuum chambers after GDC(He). Cleaning patterns have been developed dominantly for de-oxidization, decarbonization and de-hydrogenization. The cleaning parameters for H recycle on the wall are also presented. This paper mainly describes the GDC system along with its parameters, breakdown voltage, volt-ampere characteristic, the range of operation safe and suitable cleaning patterns in the HL-1M tokamak, finally concluding with some suggestions on HL-2A GDC.

  5. Stability of atmospheric pressure glow discharge and application to carbon nanotube deposition

    NASA Astrophysics Data System (ADS)

    Nozaki, Tomohiro; Okazaki, Ken; Kortshagen, Uwe; Heberlein, Joachim

    2003-10-01

    This paper describes carbon nanotube deposition using helium-based glow barrier discharge. Two important issues will be discussed: The stability of glow discharge and aligned growth of nanotube. Silicone substrate having 20 nm nickel film was secured on metallic bottom electrode where the temperature was elevated by 600C. In addition to CH4 or C2H2, the process gas also include hydrogen ( ˜10vol%) in order to etch out excess carbon deposited on Ni particle. Highly contaminated helium tends to form filamentary discharges, and then severely deteriorates deposited materials. It also limits operating conditions such as gap separation, voltage amplitude, and so on. The stability issue will be extensively discussed in terms of emission spectroscopy which also makes clear chemical processes. Nanotubes vertically grow in the presence of directional electric field, and this is a big challenge in barrier discharges because dielectric barrier forces to use AC voltage to maintain stable plasma conditions. Alignment of nanotube also depends on carbon sources. C2H2 generally provides curly nanotubes, whereas rather straight nanotubes likely grow with methane. Control growth of nanotube will be discussed based on voltage waveform (Sin/Pulse) and carbon source.

  6. Atmospheric Pressure Glow Discharge Plasma and Surface Modification of PET Textile by APGDP

    NASA Astrophysics Data System (ADS)

    Gu, Biao; Chen, Ru; Xu, Yin; Deng, Xiang; Shi, Qingjun

    2002-11-01

    Comparing with traditional chemistry method, surface modification of Polyethylene terephthalate (PET) fabrics by using of Atmospheric Pressure Glow Discharge Plasma (APGDP) has many advantages, such as low cost, low pollution and low energy consumption. So it has huge application in textile industry due to no requirement for vacuum system. In this paper, the generation and the characteristics of APGDP on a homemade device were investigated experimentally. The volt-ampere characteristic and the Lissajous figure demonstrated that, different from dielectric barrier discharge (DBD), there is no filaments appeared between electrodes. It is a glow discharge in one atmospheric pressure. Furthermore we investigated the surface modification of PET by APGDP. The relationship between PET characteristics (wettability, critical surface tension, timing-effect, dyeablity etc.) and various discharge parameters are discussed. At last, the measurements of ATR-FTIR (Attenuated Total Refraction-Fourier Transform Infarared Spectroscopy) and dyeing properties are demonstrated, and the mechanism of modification is analyzed basically. Key words: APGDP£¬Surface modification , PET

  7. Influence of thin porous Al{sub 2}O{sub 3} layer on aluminum cathode to the H{sub a}lpha line shape in glow discharge

    SciTech Connect

    Steflekova, V.; Sisovic, N. M.; Konjevic, N.

    2009-06-01

    The results of the Balmer alfa line shape study in a plane cathode-hollow anode Grimm discharge with aluminum (Al) cathode covered with thin layer of porous Al{sub 2}O{sub 3} are presented. The comparison with same line profile recorded with pure Al cathode shows lack of excessive Doppler broadened line wings, which are always detected in glow discharge with metal cathode. The effect is explained by the lack of strong electric field in the cathode sheath region, which is missing in the presence of thin oxide layer in, so called, spray discharge.

  8. Characteristics of atmospheric-pressure, radio-frequency glow discharges operated with argon added ethanol

    SciTech Connect

    Sun Wenting; Li Guo; Li Heping; Bao Chengyu; Wang Huabo; Zeng Shi; Gao Xing; Luo Huiying

    2007-06-15

    Rf, atmospheric-pressure glow discharge (APGD) plasmas with bare metal electrodes have promising prospects in the fields of plasma-aided etching, thin film deposition, disinfection and sterilization, etc. In this paper, the discharge characteristics are presented for the rf APGD plasmas generated with pure argon or argon-ethanol mixture as the plasma-forming gas and using water-cooled, bare copper electrodes. The experimental results show that the breakdown voltage can be reduced significantly when a small amount of ethanol is added into argon, probably due to the fact that the Penning ionization process is involved, and a pure {alpha}-mode discharge can be produced more easily with the help of ethanol. The uniformity of the rf APGDs of pure argon or argon-ethanol mixtures using bare metallic electrodes is identified with the aid of the intensified charge coupled device images.

  9. Characteristics of atmospheric-pressure, radio-frequency glow discharges operated with argon added ethanol

    NASA Astrophysics Data System (ADS)

    Sun, Wen-Ting; Li, Guo; Li, He-Ping; Bao, Cheng-Yu; Wang, Hua-Bo; Zeng, Shi; Gao, Xing; Luo, Hui-Ying

    2007-06-01

    Rf, atmospheric-pressure glow discharge (APGD) plasmas with bare metal electrodes have promising prospects in the fields of plasma-aided etching, thin film deposition, disinfection and sterilization, etc. In this paper, the discharge characteristics are presented for the rf APGD plasmas generated with pure argon or argon-ethanol mixture as the plasma-forming gas and using water-cooled, bare copper electrodes. The experimental results show that the breakdown voltage can be reduced significantly when a small amount of ethanol is added into argon, probably due to the fact that the Penning ionization process is involved, and a pure α-mode discharge can be produced more easily with the help of ethanol. The uniformity of the rf APGDs of pure argon or argon-ethanol mixtures using bare metallic electrodes is identified with the aid of the intensified charge coupled device images.

  10. Non-local Effects in a Stratified Glow Discharge With Dusty Particles

    SciTech Connect

    Sukhinin, G. I.; Fedoseev, A. V.; Ramazanov, T. S.; Amangaliyeva, R. Zh.; Dosbolayev, M. K.; Jumabekov, A. N.

    2008-09-07

    The work is aimed to describe non-local effects in the positive column of a low pressure stratified DC glow discharge in argon with dusty particles in a vertical cylindrical discharge tube. The numerical calculations of plasma parameters in the axis of the discharge tube were performed with the help of hybrid model based on the solution of non-local Boltzmann equation for EEDF. Distributions of optical emission from striations were measured experimentally. It is shown that in a stratified positive column the EEDF is not Maxwellian and even non-monotonous. Also, the effect of displacing of optical emission distribution relative to the electric field is shown both by numerical simulation and experimental measurements.

  11. Spectroscopic study of hydrogen rotational, vibrational and translational temperatures in a hollow cathode glow discharge

    NASA Astrophysics Data System (ADS)

    Majstorovic, G. Lj.

    2008-07-01

    Hydrogen hollow cathode glow discharges (HCGD) have been extensively used for study of fundamental discharge processes as well as for wide variety of applications. For instance, recently, this type of discharge was utilized for producing hydrogen by reforming natural gas (da Silva et al. 2006). The translational or gas kinetic temperature in gas discharges is a parameter of utmost importance in the field of plasma chemistry while vibrationally excited neutral hydrogen molecules play significant role in the chemistry of weakly ionized hydrogen plasmas. This is why the modeling of cold, reactive hydrogen plasma includes rotational and vibrational energy of the hydrogen molecule. This is the reason why we study HC discharge parameters like rotational, translational and vibrational temperature. Several diagnostic techniques are developed to determine gas kinetic temperature T_g like coherent anti-stokes Raman scattering (CARS), laser-induced fluorescence (LIF) and optical emission spectroscopy (OES). Here we selected OES. This diagnostic technique provides information about atom, molecule and ion density in excited and ground state, as well as rotational, vibrational, and gas temperature including the excitation temperature of certain group of excited levels. The technique is applied for measurements of the rotational T_rot, vibrational T_vib and determines translational temperatures in a hollow cathode glow discharge in hydrogen. The rotational temperature of excited electron energy levels is determined from the Boltzmann plot of intensities of rotational moleculelar hydrogen lines belonging to Fulcher-alpha diagonal bands. Following procedure described elsewhere (Astashkevich et al. 2006) the temperature of ground state rovibronic levels is evaluated. The constrains of rotational temperature are discussed in detail. The vibrational temperature is also determined, but from the relative intensities of the H_2 Fulcher-alpha diagonal bands. The dependence of these

  12. Novel approach to produce polymerized hydrocarbon coatings using dielectric barrier controlled atmospheric pressure glow discharge plasma

    NASA Astrophysics Data System (ADS)

    Mishra, K. K.; Khardekar, R. K.; Singh, Rashmi; Pant, H. C.

    2002-09-01

    Conventionally, low-pressure (<1 Torr) electrical discharges are used for material processing and thin-film deposition. These schemes suffer mainly due to the high cost of equipment and the complexity of operations. The atmospheric pressure glow discharge plasma is developed using a threaded styled electrode in different configurations, and these reactors are used to produce plasma polymerized coatings, required on plane substrates as self-supporting films to obtain membranes for blocking holes in cavities, and on microballoon targets, which are used as fuel containers for inertial confinement fusion, to avoid DT gas permeation. Helium gas is used as the supporting gas for formation and stabilization of atmospheric pressure glow discharge plasma reactors. Ethylene and acetylene gases are used as monomers to produce plasma polymerized hydrocarbon films. These films are characterized using scanning electron microscopy. Plasma polymerized coatings of thickness 100 nm-10 μm with a smooth surface finish (rms<100 nm) are deposited successfully. The surface finish is further improved using a postdischarge configuration. Preliminary results are very encouraging but further progress is to be made in this area. We are also planning to extend this technique for C:H coating of microballoons, which are used as fuel containers in inertial confinement fusion.

  13. Influence of the transverse dimension on the structure and properties of dc glow discharges

    SciTech Connect

    Bogdanov, E. A.; Adams, S. F.; Demidov, V. I.; Kudryavtsev, A. A.; Williamson, J. M.

    2010-10-15

    Two-dimensional (2D) simulations of a dc glow discharge with a cold cathode in argon have been performed for various radii of the discharge tube. It is shown that the loss of the charged particles to the walls can significantly affect plasma parameters as well as properties of the cathode sheath. The longitude dimensions of the negative glow and Faraday dark space depend on the transverse loss of the charge particles and are not consistently predicted with a 1D model. The common assumption that the cathode sheath can be analyzed independently of the plasma also may not be valid. The transverse inhomogeneity of the plasma leads to a change in the current density distribution over the cathode surface. The thickness of the cathode sheath can vary with radial distance from the discharge axis, even for the case of negligible radial loss of the charge particles. The 2D model results provide an analysis of the conditions of applicability of the 1D model.

  14. Characteristics of Liquid Flow Induced by Atmospheric Pressure DC Glow Discharge with Liquid Electrode

    NASA Astrophysics Data System (ADS)

    Tochikubo, Fumiyoshi; Aoki, Takuya; Shirai, Naoki; Uchida, Satoshi

    2015-09-01

    In the application of atmospheric-pressure discharges in contact with liquid, primary reactions are initiated between radicals and liquid molecules at plasma-liquid interface. Since the diffusion in the liquid is very slow, some convective flow is necessary to exchange the chemicals at the plasma-liquid interface for the efficient reactions. In our previous work, we found the appearance of specific downward flow in the liquid just below the dc glow discharge in contact with liquid. This downflow will be effective for exchanging the chemicals at plasma-liquid interface. In this work, we investigated the characteristics of liquid flow induced by atmospheric-pressure dc glow discharge with liquid electrode in detail; the influence of voltage polarity, current amplitude, liquid conductivity, the electrode arrangement, and so on. The spatiotemporal development of liquid flow was visualized by schlieren method, and the temperature distribution was measured using temperature-sensitive liquid crystal particles dispersed in the liquid. The liquid-flow characteristics was reproduced by a fluid simulation considering a downward driving force at liquid surface from plasma. The candidate of the driving force will be the momentum transfer of charged species at the liquid surface. This work is partly supported by JSPS KAKENHI Grant Number 15H03584.

  15. Methodology to analyse small silicon samples by glow discharge mass spectrometry using a thin wafer mask

    PubMed Central

    Modanese, C.; Arnberg, L.; Di Sabatino, M.

    2015-01-01

    Glow discharge mass spectrometry (GDMS) is widely used for trace element analysis of bulk solid samples. The geometry of the GD source limits the minimum size of the sample, which for the instrument used in this work (ThermoElementGD) is 20 mm in diameter. From time to time, there is the need to analyse smaller samples with this technique, and we present here a methodology to analyse samples of 9–20 mm diameter through the use of thin masks. Thin masks have been previously used mostly as secondary cathode for the analysis of non-conducting materials, with hole size smaller than the area of the glow discharge. The use of masks in this work includes the following customization:•The choice of highly-pure Si as mask material, to decrease the chance of interferences with the Si samples.•The use of a hole in the mask of the same size as the discharge area. This implies that the mask material is not sputtered, thus decreasing chances for contamination from the mask itself. PMID:26649274

  16. Radio-frequency powered glow discharge device and method with high voltage interface

    DOEpatents

    Duckworth, Douglas C.; Marcus, R. Kenneth; Donohue, David L.; Lewis, Trousdale A.

    1994-01-01

    A high voltage accelerating potential, which is supplied by a high voltage direct current power supply, is applied to the electrically conducting interior wall of an RF powered glow discharge cell. The RF power supply desirably is electrically grounded, and the conductor carrying the RF power to the sample held by the probe is desirably shielded completely excepting only the conductor's terminal point of contact with the sample. The high voltage DC accelerating potential is not supplied to the sample. A high voltage capacitance is electrically connected in series between the sample on the one hand and the RF power supply and an impedance matching network on the other hand. The high voltage capacitance isolates the high DC voltage from the RF electronics, while the RF potential is passed across the high voltage capacitance to the plasma. An inductor protects at least the RF power supply, and desirably the impedance matching network as well, from a short that might occur across the high voltage capacitance. The discharge cell and the probe which holds the sample are configured and disposed to prevent the probe's components, which are maintained at ground potential, from bridging between the relatively low vacuum region in communication with the glow discharge maintained within the cell on the one hand, and the relatively high vacuum region surrounding the probe and cell on the other hand. The probe and cell also are configured and disposed to prevent the probe's components from electrically shorting the cell's components.

  17. Radio-frequency powered glow discharge device and method with high voltage interface

    DOEpatents

    Duckworth, D.C.; Marcus, R.K.; Donohue, D.L.; Lewis, T.A.

    1994-06-28

    A high voltage accelerating potential, which is supplied by a high voltage direct current power supply, is applied to the electrically conducting interior wall of an RF powered glow discharge cell. The RF power supply desirably is electrically grounded, and the conductor carrying the RF power to the sample held by the probe is desirably shielded completely excepting only the conductor's terminal point of contact with the sample. The high voltage DC accelerating potential is not supplied to the sample. A high voltage capacitance is electrically connected in series between the sample on the one hand and the RF power supply and an impedance matching network on the other hand. The high voltage capacitance isolates the high DC voltage from the RF electronics, while the RF potential is passed across the high voltage capacitance to the plasma. An inductor protects at least the RF power supply, and desirably the impedance matching network as well, from a short that might occur across the high voltage capacitance. The discharge cell and the probe which holds the sample are configured and disposed to prevent the probe's components, which are maintained at ground potential, from bridging between the relatively low vacuum region in communication with the glow discharge maintained within the cell on the one hand, and the relatively high vacuum region surrounding the probe and cell on the other hand. The probe and cell also are configured and disposed to prevent the probe's components from electrically shorting the cell's components. 11 figures.

  18. A comparison of polypropylene-surface treatment by filamentary, homogeneous and glow discharges in helium at atmospheric pressure

    NASA Astrophysics Data System (ADS)

    Massines, F.; Gouda, G.

    1998-12-01

    Three different dielectric barrier-controlled discharge regimes in helium at atmospheric pressure under sinusoidal excitation have been obtained by varying the excitation frequency or the gas chemical composition: the filamentary discharge, which is the discharge that is usually obtained; the glow discharge, which is controlled by cathode secondary emission; and the homogeneous discharge, which is of a nature in between those of the filamentary and the glow discharges. All the characteristics that have been studied, such as the discharge current, the emission spectrum, the wettability and the chemical transformations of a polypropylene film, are related to the discharge-regime variation. The glow discharge is clearly more efficient than the others as a means of increasing the polypropylene-surface energy. Values as high as 62 mJ 0022-3727/31/24/003/img1 are obtained with this discharge whereas the maximum value after interaction with the filamentary one is 45 mJ 0022-3727/31/24/003/img1. This improvement in wettability is due to there being more O atoms implanted at the surface as well as to the addition of N atoms. The differences among in surface transformations have been correlated to the characteristics of these different discharges and more specifically to the localization of the electrical energy transfer into the gas and to the nature of the ions created during the discharge.

  19. Formation of carbonic nanostructures using PECVD and glow-discharge plasma at direct current

    NASA Astrophysics Data System (ADS)

    Gromov, D. G.; Gavrilov, S. A.; Dubkov, S. V.

    2010-02-01

    In this research the process of formation carbonic nanostructures using low temperatures was studied. Nanostructures were formed using PECVD and glow-discharge plasma. The research was carried out at temperature range between 300°C - 700°C. The influence of Ni catalyst thickness and concentration of carbon-containing component in vapour phase on the structure of carbonic deposit was studied. Consequently we attained productive growth of both the homogeneous vertical nanotubes and graphene flakes array at low temperature (350°C). Electrophysical features of obtained structures were examined.

  20. Formation of carbonic nanostructures using PECVD and glow-discharge plasma at direct current

    NASA Astrophysics Data System (ADS)

    Gromov, D. G.; Gavrilov, S. A.; Dubkov, S. V.

    2009-10-01

    In this research the process of formation carbonic nanostructures using low temperatures was studied. Nanostructures were formed using PECVD and glow-discharge plasma. The research was carried out at temperature range between 300°C - 700°C. The influence of Ni catalyst thickness and concentration of carbon-containing component in vapour phase on the structure of carbonic deposit was studied. Consequently we attained productive growth of both the homogeneous vertical nanotubes and graphene flakes array at low temperature (350°C). Electrophysical features of obtained structures were examined.

  1. Genetic effects of radio-frequency, atmospheric-pressure glow discharges with helium

    NASA Astrophysics Data System (ADS)

    Li, Guo; Li, He-Ping; Wang, Li-Yan; Wang, Sen; Zhao, Hong-Xin; Sun, Wen-Ting; Xing, Xin-Hui; Bao, Cheng-Yu

    2008-06-01

    Due to low gas temperatures and high densities of active species, atmospheric-pressure glow discharges (APGDs) would have potential applications in the fields of plasma-based sterilization, gene mutation, etc. In this letter, the genetic effects of helium radio-frequency APGD plasmas with the plasmid DNA and oligonucleotide as the treated biomaterials are presented. The experimental results show that it is the chemically active species, instead of heat, ultraviolet radiation, intense electric field, and/or charged particles, that break the double chains of the plasmid DNA. The genetic effects depend on the plasma operating parameters, e.g., power input, helium flow rate, processing distance, time, etc.

  2. Genetic effects of radio-frequency, atmospheric-pressure glow discharges with helium

    SciTech Connect

    Li Guo; Li Heping; Wang Sen; Sun Wenting; Bao Chengyu; Wang Liyan; Zhao Hongxin; Xing Xinhui

    2008-06-02

    Due to low gas temperatures and high densities of active species, atmospheric-pressure glow discharges (APGDs) would have potential applications in the fields of plasma-based sterilization, gene mutation, etc. In this letter, the genetic effects of helium radio-frequency APGD plasmas with the plasmid DNA and oligonucleotide as the treated biomaterials are presented. The experimental results show that it is the chemically active species, instead of heat, ultraviolet radiation, intense electric field, and/or charged particles, that break the double chains of the plasmid DNA. The genetic effects depend on the plasma operating parameters, e.g., power input, helium flow rate, processing distance, time, etc.

  3. Hydrogen in carbon foils made by DC glow discharge in ethylene

    NASA Astrophysics Data System (ADS)

    Bailey, P.; Armour, D. G.; England, J. B. A.; Tait, N. R. S.; Tolfree, D. W. L.

    1983-08-01

    Thermal desorption has been studied from thin films of carbon prepared by dc glow discharge in ethylene. The only gases released in significant quantities are hydrogen and methane. Both releases can be characterised by a continuum of activation energies but the methane release peaks at a lower temperature than that from hydrogen. The estimated total hydrogen release is compared with the hydrogen content determined by nuclear scattering experiments. Infra red studies suggest that the majority of CH 2 and CH 3 bonds can be ruptured by annealing at 300°C, a temperature well below the hydrogen and methane release rate maxima. Possible hydrogen bonding modes and desorption mechanisms are discussed.

  4. Child–Langmuir law applicability for a cathode sheath description of glow discharge in hydrogen

    NASA Astrophysics Data System (ADS)

    Lisovskiy, V. A.; Artushenko, K. P.; Yegorenkov, V. D.

    2016-08-01

    The present paper reveals that the Child-Langmuir law version with the constant ion mobility has to be applied for the cathode sheath description of the glow discharge in hydrogen. Using the analytical model we demonstrate that even in a high electric field the constant mobility law version rather than that for the constant ion mean free path has to hold in the case of impeded charge exchange and the dominant effect of polarization forces on the ion motion through the cathode sheath.

  5. Degradation of Chloroanilines in Aqueous Solution by Contact Glow Discharge Electrolysis

    NASA Astrophysics Data System (ADS)

    Gao, Jin-zhang; Hu, Zhong-ai; Lu, Quan-fang; Na, Peng-jun; Chen, Ping; Liu, Yong-jun; Yu, Jie

    2003-04-01

    Contact glow discharge electrolysis of some chloroanilines in sodium sulfate was investigated in different initial concentrations. Each of them underwent the dechlorination, deamination through oxidative degradation, and were eventually decomposed into hydrogen carbonate and carbon dioxide. It was testified that the chlorine atom and amidogen could be transformed into chloride ion and nitrite ion, respectively. Fe2+ has a remarkable catalytic effect on the degradation of them. On the basis of the detailed analysis of the intermediate products and kinetic behaviors, the reaction pathway was proposed, in which the attack of hydroxyl radical on the benzene ring of starting material might be a key step.

  6. Efficient methane conversion to hydrogen and hydrocarbons by combination of corona and glow discharge

    NASA Astrophysics Data System (ADS)

    Ghorbanzadeh, A. M.; Matin, N. S.

    2004-03-01

    In this study we offer a new type of plasma which consists of double, corona and glow, discharge to convert natural gas, the main part of which is methane. The most important future of this type of plasma is the steady increase of overall chemical energy efficiency by enhancement of repetition rate. At repetition rate of R=80 Hz, the energy efficiency of 5.5% was increased to 10% at R=330 Hz and more improvement was yet expected at higher repetition rates. Easy control of selectivity of products that were hydrogen, acetylene, ethylene, ethane and hydrocarbons with up to 5 carbons, was also possible by repetition rate.

  7. Numerical simulation of atomic nitrogen formation in plasma of glow discharge in nitrogen-argon mixture

    NASA Astrophysics Data System (ADS)

    Khomich, V. A.; Ryabtsev, A. V.; Didyk, E. G.; Zhovtyansky, V. A.; Nazarenko, V. G.

    2010-10-01

    We consider the problem of determining the content of atomic nitrogen as an active component responsible for the efficiency of metal surface modification in plasma of stationary low-pressure glow discharge in nitrogen-argon mixture (widely used in this technology). The influence of the gas mixture composition on the rate constant of molecular nitrogen dissociation, which determines the atomic nitrogen production, has been calculated, The parameters of plasma have been experimentally determined using the method of double probes. The electron energy distribution function is found by numerically integrating the Boltzmann equation in a two-term approximation for the molecular nitrogen-argon mixture.

  8. Generation of O2 From CO2 by Glow Discharge And Permeation

    NASA Technical Reports Server (NTRS)

    Outlaw, R. A.

    1993-01-01

    Technique for generating supply of highly pure O2 from CO2 developed. First, atomic oxygen at useful partial pressure generated by glow-discharge dissociation of CO2. Atomic oxygen formed in vicinity of hot silver membrane and permeates through membrane to downstream region, where thermally recombined into O2 and pumped away to storage tank. Pure oxygen stored suitable for human consumption and other uses. Originally developed to convert Martian atmosphere of CO2 to O2 for astronaut consumption. Other potential applications include purification of atmospheres in Space Shuttle and Space Station Freedom. Byproduct CO must be handled by other techniques.

  9. Analysis of green fluorescent protein bioluminescence in vivo and in vitro using a glow discharge

    NASA Astrophysics Data System (ADS)

    Hernández, L.; Mandujano, L. A.; Cuevas, J.; Reyes, P. G.; Osorio-González, D.

    2015-03-01

    The discovery of fluorescent proteins has been a revolution in cell biology and related sciences because of their many applications, mainly emphasizing their use as cellular markers. The green fluorescent protein (GFP) is one of the most used as it requires no cofactors to generate fluorescence and retains this property into any organism when it is expressed by recombinant DNA techniques, which is a great advantage. In this work, we analyze the emission spectra of recombinant green fluorescent protein in vivo and in vitro exposed to a glow discharge plasma of nitrogen in order to relate electron temperature to fluorescence intensity.

  10. Surface oxygen micropatterns on glow discharge polymer targets by photo irradiation

    DOE PAGESBeta

    Reynolds, Hannah; Baxamusa, Salmaan; Haan, Steven W.; Fitzsimmons, Paul; Carlson, Lane; Farrell, Mike; Nikroo, Abbas; Watson, Brian J.

    2016-02-24

    Recent simulations predict surface oxygen may be a significant source of disruptive perturbations in the implosion process of glow-discharge polymers (GDP) ablators at the National Ignition Facility. GDP material held in ambient atmospheric conditions showed an increase in mass when stored in light transparent containers, which suggests that photo exposure is a driving force for oxygen absorption. To investigate if surface oxygen is a contributing factor of disruptive perturbations during implosion, we developed a method to imprint a periodic micropattern of oxygen on the surface of GDP and used it to fabricate a flat sample for empirical testing.

  11. Irregular-regular-irregular mixed mode oscillations in a glow discharge plasma

    SciTech Connect

    Ghosh, Sabuj Shaw, Pankaj Kumar Saha, Debajyoti Janaki, M. S. Iyengar, A. N. Sekar

    2015-05-15

    Floating potential fluctuations of a glow discharge plasma are found to exhibit different kinds of mixed mode oscillations. Power spectrum analysis reveals that with change in the nature of the mixed mode oscillation (MMO), there occurs a transfer of power between the different harmonics and subharmonics. The variation in the chaoticity of different types of mmo was observed with the study of Lyapunov exponents. Estimates of correlation dimension and the Hurst exponent suggest that these MMOs are of low dimensional nature with an anti persistent character. Numerical modeling also reflects the experimentally found transitions between the different MMOs.

  12. Evaluation of a pulsed glow discharge time-of-flight mass spectrometer as a detector for gas chromatography and the influence of the glow discharge source parameters on the information volume in chemical speciation analysis.

    PubMed

    Fliegel, Daniel; Fuhrer, Katrin; Gonin, Marc; Günther, Detlef

    2006-09-01

    The figures of merit of a pulsed glow discharge time-of-flight mass spectrometer (GD-TOFMS) as a detector for gas chromatography (GC) analysis were evaluated. The mass resolution for the GD-TOFMS was determined on FWHM in the high mass range (208Pb+) as high as 5,500. Precision of 400 subsequent analyses was calculated on 63Cu+ to be better than 1% RSD with no significant drift over the time of the analysis. Isotope precision based on the 63Cu+/65Cu+ ratio over 400 analyses was 1.5% RSD. The limits of detection for gaseous analytes (toluene in methanol as solvent) were determined to be as low as several hundred ppb or several hundred pg absolute without using any pre-concentration technique. Furthermore, the different GD source parameters like capillary distance, cathode-anode spacing, and GD source pressure with regards to the accessible elemental, structural, and molecular information were evaluated. It was demonstrated that each of these parameters has severe influence on the ratio of elemental, structural, and parent molecular information in chemical speciation analysis. PMID:16773303

  13. In-situ characterisation of the dynamics of a growing dust particle cloud in a direct-current argon glow discharge

    NASA Astrophysics Data System (ADS)

    Barbosa, S.; Couëdel, L.; Arnas, C.; Kishor Kumar, K.; Pardanaud, C.; Onofri, F. R. A.

    2016-02-01

    The growth and the dynamics of a tungsten nanoparticle cloud were investigated in a direct-current low pressure argon glow discharge. Real-time analyses of the dust particle size and number concentration were performed in-situ by light extinction spectrometry, while spatial dynamics of the cloud was investigated with the laser light-sheet scattering method. Additional off-line electron microscopy and Raman spectroscopy measurements were also performed for comparison purpose. This experimental work reveals the existence of an agglomeration phase followed by the appearance of a new dust particle generation. While growing, the dust cloud is pushed towards the anode and the discharge edge. Afterwards, a new dust particle generation can grow in the space freed by the first generation of nanoparticles. The continuous growth, below the light extinction spectrometry scanning positions, explains the apparent dissimilarities observed between the in-line optical and the off-line electron microscopy analyses.

  14. Role of electrostatic and magnetic electron confinement in a hollow-cathode glow discharge in a nonuniform magnetic field

    SciTech Connect

    Metel, A. S. Grigoriev, S. N.; Volosova, M. A.; Bolbukov, V. P.; Melnik, Yu. A.

    2015-02-15

    Glow discharge with electron confinement in an electrostatic trap has been studied. The trap is formed by a cylindrical hollow cathode, as well as by a flat target on its bottom and a grid covering its output aperture, both being negatively biased relative to the cathode. At a gas pressure of 0.2–0.4 Pa, the fraction of ions sputtering the target (δ = 0.13) in the entire number of ions emitted by the uniform discharge plasma corresponds to the ratio of the target surface area to the total surface area of the cathode, grid, and target. When a nonuniform magnetic field with force lines passing through the target center (where the magnetic induction reaches 35 mT), as well as through the grid, hollow cathode, and target periphery (where the field lines are arc-shaped), is applied to the trap, its influence on the discharge depends on the magnetic induction B{sub 0} at the target edge. At B{sub 0} = 1 mT, the electrons emitted from the target periphery and drifting azimuthally in the arc-shaped field insignificantly contribute to gas ionization. Nevertheless, since fast electrons that are emitted from the cathode and oscillate inside it are forced by the magnetic field to come more frequently to the target, thereby intensifying gas ionization near the latter, the fraction δ doubles and the plasma density near the target becomes more than twice as high as that near the grid. At B{sub 0} = 6 mT, the contribution of electrons emitted from the target surface to gas ionization near the target grows up and δ increases two more times. At cathode-target voltages in the range of 0–3 kV, the current in the target circuit vanishes as the voltage between the anode and the cathode decreases to zero.

  15. Role of electrostatic and magnetic electron confinement in a hollow-cathode glow discharge in a nonuniform magnetic field

    NASA Astrophysics Data System (ADS)

    Metel, A. S.; Grigoriev, S. N.; Volosova, M. A.; Bolbukov, V. P.; Melnik, Yu. A.

    2015-02-01

    Glow discharge with electron confinement in an electrostatic trap has been studied. The trap is formed by a cylindrical hollow cathode, as well as by a flat target on its bottom and a grid covering its output aperture, both being negatively biased relative to the cathode. At a gas pressure of 0.2-0.4 Pa, the fraction of ions sputtering the target (δ = 0.13) in the entire number of ions emitted by the uniform discharge plasma corresponds to the ratio of the target surface area to the total surface area of the cathode, grid, and target. When a nonuniform magnetic field with force lines passing through the target center (where the magnetic induction reaches 35 mT), as well as through the grid, hollow cathode, and target periphery (where the field lines are arc-shaped), is applied to the trap, its influence on the discharge depends on the magnetic induction B 0 at the target edge. At B 0 = 1 mT, the electrons emitted from the target periphery and drifting azimuthally in the arc-shaped field insignificantly contribute to gas ionization. Nevertheless, since fast electrons that are emitted from the cathode and oscillate inside it are forced by the magnetic field to come more frequently to the target, thereby intensifying gas ionization near the latter, the fraction δ doubles and the plasma density near the target becomes more than twice as high as that near the grid. At B 0 = 6 mT, the contribution of electrons emitted from the target surface to gas ionization near the target grows up and δ increases two more times. At cathode-target voltages in the range of 0-3 kV, the current in the target circuit vanishes as the voltage between the anode and the cathode decreases to zero.

  16. Generation of multiple toroidal dust vortices by a non-monotonic density gradient in a direct current glow discharge plasma

    SciTech Connect

    Kaur, Manjit Bose, Sayak; Chattopadhyay, P. K.; Sharma, D.; Ghosh, J.; Saxena, Y. C.; Thomas, Edward

    2015-09-15

    Observation of two well-separated dust vortices in an unmagnetized parallel plate DC glow discharge plasma is reported in this paper. A non-monotonic radial density profile, achieved by an especially designed cathode structure using a concentric metallic disk and ring of different radii, is observed to produce double dust tori between cathode and anode. PIV analysis of the still images of the double tori shows oppositely rotating dust structures between the central disk and the ring. Langmuir probe measurements of background plasma shows a non-uniform plasma density profile between the disk and the ring. Location and sense of rotation of the dust vortices coincides with the location and direction of the radial gradient in the ion drag force caused by the radial density gradient. The experimentally observed dust vorticity matches well with the calculated one using hydrodynamic formulations with shear in ion drag dominating over the dust charge gradient. These results corroborate that a radial gradient in the ion drag force directed towards cathode is the principal cause of dust rotation.

  17. Laser-induced optogalvanic signal oscillations in miniature neon glow discharge plasma.

    PubMed

    Saini, V K

    2013-06-20

    Laser-induced optogalvanic (OG) signal oscillations detected in miniature neon glow discharge plasma are investigated using a discharge equivalent-circuit model. The damped oscillations in OG signal are generated when a pulsed dye laser is tuned to a specific neon transition (1s5→2p2) at 588.2 nm under the discharge conditions where dynamic resistance changes its sign. Penning ionization via quasi-resonant energy transfer collisions between neon gas atoms in metastable state and sputtered electrode atoms in ground state is discussed to explain the negative differential resistance properties of discharge plasma that are attributed to oscillations in the OG signal. The experimentally observed results are simulated by analyzing the behavior of an equivalent discharge-OG circuit. Good agreement between theoretically calculated and experimental results is observed. It is found that discharge plasma is more sensitive and less stable in close vicinity to dynamic resistance sign inversion, which can be useful for weak-optical-transition OG detection. PMID:23842186

  18. Irradiation of silver and agar/silver nanoparticles with argon, oxygen glow discharge plasma, and mercury lamp.

    PubMed

    Ahmad, Mahmoud M; Abdel-Wahab, Essam A; El-Maaref, A A; Rawway, Mohammed; Shaaban, Essam R

    2014-01-01

    The irradiation effect of argon, oxygen glow discharge plasma, and mercury lamp on silver and agar/silver nanoparticle samples is studied. The irradiation time dependence of the synthesized silver and agar/silver nanoparticle absorption spectra and their antibacterial effect are studied and compared. In the agar/silver nanoparticle sample, as the irradiation time of argon glow discharge plasma or mercury lamp increases, the peak intensity and the full width at half maximum, FWHM, of the surface plasmon resonance absorption band is increased, however a decrease of the peak intensity with oxygen glow plasma has been observed. In the silver nanoparticle sample, as the irradiation time of argon, oxygen glow discharge plasma or mercury lamp increases, the peak intensity of the surface plasmon resonance absorption band is increased, however, there is no significant change in the FWHM of the surface plasmon resonance absorption band. The SEM results for both samples showed nanoparticle formation with mean size about 50 nm and 40 nm respectively. Throughout the irradiation time with the argon, oxygen glow discharge plasma or mercury lamp, the antibacterial activity of several kinds of Gram-positive and Gram-negative bacteria has been examined. PMID:25184109

  19. Glow Discharge Plasma Active Control of Separation at Low Pressure Turbine Conditions.

    NASA Astrophysics Data System (ADS)

    Hultgren, Lennart S.; Ashpis, David E.

    2002-11-01

    Active flow control of boundary-layer separation using glow-discharge plasma actuators is studied experimentally. Separation is induced on a flat plate installed in a closed-circuit wind tunnel by a shaped insert on the opposite wall. The flow conditions represent flow over the suction surface of a modern low-pressure-turbine airfoil. The Reynolds number, based on wetted plate length and nominal exit velocity, is varied from 50,000 to 300,000, covering cruise to takeoff conditions. Low (0.2%) and high (2.5%) free-stream turbulence intensities are set using passive grids. The base flow includes closed separation bubbles and non-reattaching separated flow, and is thoroughly documented using single-wire constant-temperature anemometry and static surface pressure measurements. A spanwise-oriented phased-plasma-array actuator, fabricated on a printed circuit board, is surface-flush-mounted upstream of the separation point and can provide forcing in a wide frequency range. Static surface pressure measurements and hot-wire anemometry of the controlled flow are performed and indicate that the glow-discharge plasma actuator is an effective device for separation control.

  20. Improvement of titanium alloy for biomedical applications by nitriding and carbonitriding processes under glow discharge conditions.

    PubMed

    Czarnowska, E; Wierzchoń, T; Maranda-Niedbała, A; Karczmarewicz, E

    2000-02-01

    Although titanium alloys are used in medicine, they present low wear resistance. In this paper we present the results of studies on surface layers produced by nitriding at three different temperatures, and by carbonitriding under glow discharge conditions in order to improve wear resistance, hardness, and to modulate microstructure and chemical composition of surface layers. A cell culture model using human fibroblasts was chosen to study the effect of such treatments on the cytocompatibility of these materials. The results showed that nitrided and carbonitrided surface layers were cytocompatible. Modulation of surface microstructure by temperature in the nitriding process and chemical composition of surface layers by carbonitriding led to differences in cellular behaviour. Cell proliferation appeared to be slightly reduced from the 6th day of culture on nitrided surfaces produced at 730 degrees C and 1000 degrees C, however after 12 days of culture, the best growth was on surface layers produced at 850 degrees C. The best viability was observed on the carbonitrided layer. The orientation and shape of the cells corresponded to surface topography. Nitriding and carbonitriding under glow discharge conditions may constitute interesting techniques allowing the formation of surface layers on parts with sophisticated shapes. They may also permit modulating surface topography in a way improving the features of titanium alloys for various applications in medicine. PMID:15348050

  1. Development of a sintering methodology through abnormal glow discharge for manufacturing metal matrix composites

    NASA Astrophysics Data System (ADS)

    Pérez, S.; Pineda, Y.; Sarmiento, A.; López, A.

    2016-02-01

    In this study, a sintering methodology is presented by using abnormal glow discharge to metal matrix composites (MMC), consisting of 316 steel, reinforced with titanium carbide (TiC). The wear behaviour of these compounds was evaluated according to the standard ASTM G 99 in a tribometer pin-on-disk. The effect of the percentage of reinforcement (3, 6, and 9%), with 40 minutes of mixing in the planetary mill is analysed, using compaction pressure of 700MPa and sintering temperature of 1,100°C±5°C, gaseous atmosphere of H2 - N2, and sintering time of 30 minutes. As a result of the research, it shows that the best behaviour against wear is obtained when the MMC contains 6% TiC. Under this parameter the lowest percentage of pores and the lowest coefficient of friction are achieved, ensuring that the incorporation of ceramic particles (TiC) in 316 austenitic steel matrix significantly improves the wear resistance. Also, it is shown that it is possible to sinter such materials using the abnormal glow discharge, being a novel and effective method in which the working temperature is reached in a short time.

  2. Decomposition of toluene in a steady-state atmospheric-pressure glow discharge

    NASA Astrophysics Data System (ADS)

    Trushkin, A. N.; Grushin, M. E.; Kochetov, I. V.; Trushkin, N. I.; Akishev, Yu. S.

    2013-02-01

    Results are presented from experimental studies of decomposition of toluene (C6H5CH3) in a polluted air flow by means of a steady-state atmospheric pressure glow discharge at different water vapor contents in the working gas. The experimental results on the degree of C6H5CH3 removal are compared with the results of computer simulations conducted in the framework of the developed kinetic model of plasma chemical decomposition of toluene in the N2: O2: H2O gas mixture. A substantial influence of the gas flow humidity on toluene decomposition in the atmospheric pressure glow discharge is demonstrated. The main mechanisms of the influence of humidity on C6H5CH3 decomposition are determined. The existence of two stages in the process of toluene removal, which differ in their duration and the intensity of plasma chemical decomposition of C6H5CH3 is established. Based on the results of computer simulations, the composition of the products of plasma chemical reactions at the output of the reactor is analyzed as a function of the specific energy deposition and gas flow humidity. The existence of a catalytic cycle in which hydroxyl radical OH acts a catalyst and which substantially accelerates the recombination of oxygen atoms and suppression of ozone generation when the plasma-forming gas contains water vapor is established.

  3. PRODUCTION OF HIGHER STRENGTH THIN WALLED GLOW DISCHARGE POLYMER SHELLS FOR CRYOGENIC EXPERIMENTS AT OMEGA

    SciTech Connect

    NIKROO,A; CZECHOWICZ,DG; CASTILLO,ER; PONTELANDOLFO,JM

    2002-04-01

    OAK A271 PRODUCTION OF HIGHER STRENGTH THIN WALLED GLOW DISCHARGE POLYMER SHELLS FOR CRYOGENIC EXPERIMENTS AT OMEGA. Thin walled polymer shells are needed for OMEGA cryogenic laser experiments. These capsules need to be about 900 {micro}m in diameter and as thin as possible (approx 1-2 {micro}m), while having enough strength to be filled with DT as fast as possible to about 1000 atm. The authors have found that by optimizing the coating parameters in the glow discharge polymer (GDP) deposition system, traditionally used for making ICF targets, they can routinely make robust, {approx} 1.5 {micro}m thick, 900 {micro}m diameter GDP shells with buckle strengths of over 0.3 atm. This is twice the strength of shells made prior to the optimization and is comparable to values quoted for polyimide shells. In addition, these shells were found to be approximately three times more permeable and over 20% denser than previously made GDP shells. The combination of higher strength and permeability is ideal for direct drive cryogenic targets at OMEGA. Shells as thin as 0.5 {micro}m have been made. In this paper, the authors discuss the shell fabrication process, effects of modifying various GDP deposition parameters on shell properties and chemical composition.

  4. Transmission characteristics of microwave in a glow-discharge dusty plasma

    NASA Astrophysics Data System (ADS)

    Jia, Jieshu; Yuan, Chengxun; Gao, Ruilin; Liu, Sha; Yue, Feng; Wang, Ying; Zhou, Zhong-Xiang; Wu, Jian; Li, Hui

    2016-07-01

    In this study, the propagation characteristics of electromagnetic wave in a glow discharge plasma with dust particles are experimentally investigated. A helium alternating current glow discharge plasmas have been successfully generated. Measurements of the plasma parameters using Langmuir probes, in the absence of dust particles, provide plasma densities (ne) of 1017 m-3 and electron temperatures (Te) ranging from 2 to 4 eV. Dusty plasmas are made by adding 30 nm radius aluminum oxide (Al2O3) particles into the helium plasma. The density of the dust particle (nd) in the device is about 1011-1012 m-3. The propagation characteristics of electromagnetic waves are determined by a vector network analyzer with 4-6 GHz antennas. An apparent attenuation by the dust is observed, and the measured attenuation data are approximately in accordance with the theoretical calculations. The effects of gas pressure and input power on the propagation are also investigated. Results show that the transmission attenuation increases with the gas pressure and input power, the charged dust particles play a significant role in the microwave attenuation.

  5. Borax as flux on sintering of iron Ancor Steel 1000® under glow discharge

    NASA Astrophysics Data System (ADS)

    Ariza Suarez, H. G.; Sarmiento Santos, A.; Ortiz Otálora, C. A.

    2016-02-01

    This work studies the flux effect of borax (di sodium tetraborate decahydrate) on sintering of iron Ancor Steel 1000® in abnormal glow discharge. The incidence of the percentage by weight of borax and the sintering temperature in the process were observed. Samples of powder metallurgical iron were prepared with proportions of 0.50%, 2.0%, 4.0% and 6.0% by weight of borax using the procedures of powder metallurgy. The samples were sintered at 800 and 1100°C for 30min, by glow discharge at low pressure in a reducing atmosphere composed of 20% H2+80% Ar. The samples in compact green-state were analyzed by TGA-DSC to determine the fusion process and mass loss during sintering. The analysis of microhardness and density, shows that at a sintering temperature of 800°C the sample density decreases and the sample microhardness increases with respect to sintered samples without borax. Sintered samples were analysed by DRX showing the absence of precipitates.

  6. DC negative corona discharge in atmospheric pressure helium: transition from the corona to the ‘normal’ glow regime

    NASA Astrophysics Data System (ADS)

    Hasan, Nusair; Antao, Dion S.; Farouk, Bakhtier

    2014-06-01

    Direct current (dc) negative corona discharges in atmospheric pressure helium are simulated via detailed numerical modeling. Simulations are conducted to characterize the discharges in atmospheric helium for a pin plate electrode configuration. A self-consistent two-dimensional hybrid model is developed to simulate the discharges and the model predictions are validated with experimental measurements. The discharge model considered consists of momentum and energy conservation equations for a multi-component (electrons, ions, excited species and neutrals) gas mixture, conservation equations for each component of the mixture and state relations. A drift-diffusion approximation for the electron and the ion fluxes is used. A model for the external circuit driving the discharge is also considered and solved along with the discharge model. Many of the key features of a negative corona discharge, namely non-linear current-voltage characteristics, spatially flat cathode current density and glow-like discharge in the high current regime are displayed in the predictions. A transition to the ‘normal’ glow discharge from the corona discharge regime is also observed. The transition is identified from the calculated current-voltage characteristic curve and is characterized by the radial growth of the negative glow and the engulfment of the cathode wire.

  7. Time-delayed transition of normal-to-abnormal glow in pin-to-water discharge

    NASA Astrophysics Data System (ADS)

    Yoon, S.-Y.; Byeon, Y.-S.; Yoo, S.; Hong, E. J.; Kim, S. B.; Yoo, S. J.; Ryu, S.

    2016-08-01

    Time-delayed transition of normal-to-abnormal glow was investigated in discharge between spoke-like pins and ultrapure water by applying AC-driven power at a frequency of 14.3 kHz at atmospheric pressure. The normal-to-abnormal transition can be recognized from the slope changes of current density, gas temperature, electrode temperature, and OH density. The slope changes took place in tens of minutes rather than just after discharge, in other words, the transition was delayed. The time-delay of the transition was caused by the interaction between the plasma and water. The plasma affected water properties, and then the water affected plasma properties.

  8. UV-VUV excimer emitter pumped by a subnormal glow discharge

    SciTech Connect

    Shuaibov, Aleksandr K; Dashchenko, Arkadii I; Shevera, Igor' V

    2001-04-30

    Characteristics of a small-size excimer emitter operating on an Ar - Cl{sub 2} mixture excited by a subnormal glow discharge are studied. It is shown that this discharge is a source of multiwavelength emission in a range of 175 - 258 nm. The optimum pressures lie in ranges of 0.3 - 0.5 kPa for chlorine and 2 - 4 kPa for argon. The average power of UV- VUV emission reaches 0.7 W, with the emission efficiency equal to 3 %. The emitter can be used in microelectronics, high-energy chemistry, short-wavelength photometry, biophysics, and medicine. (laser applications and other topics in quantum electronics)

  9. Size-dependent capacitance of NiO nanoparticles synthesized with cathodic contact glow discharge electrolysis

    NASA Astrophysics Data System (ADS)

    Allagui, Anis; Alami, Abdul Hai; Baranova, Elena A.; Wüthrich, Rolf

    2014-09-01

    NiO nanoparticles of 70, 91 and 107 nm average diameter are synthesized by cathodic contact glow discharge electrolysis at 30, 36 and 42 VDC respectively, in 2 M H2SO4 + 0.5 M ethanol + 2.5 mg ml-1 of PVP, and are investigated for electrochemical energy storage. From the cyclic voltammetry and galvanostatic charge-discharge measurements in 1 M KOH, it was found that a maximum specific capacitance of 218 F g-1 is achieved with the 70 nm NiO nanoparticles at 2.7 A g-1. Larger nanoparticles of 91 and 107 nm diameter exhibit specific capacitances of 106 and 63 F g-1, respectively, suggesting a size-dependent capacitive performance enhanced with decreasing particles size.

  10. Investigation and quantification of nonlinearity using surrogate data in a glow discharge plasma

    SciTech Connect

    Saha, Debajyoti Shaw, Pankaj Kumar; Ghosh, Sabuj; Janaki, M. S.; Sekar Iyengar, A. N.

    2015-02-15

    Detection of nonlinearity has been carried out in periodic and aperiodic floating potential fluctuations of DC glow discharge plasma by generating surrogate data using iterative amplitude adjusted Fourier transform method. We introduce “delay vector variance” analysis (DVV) for the first time, which allows reliable detection of nonlinearity and provides some easy to interpret diagram conveying information about the nature of the experimental floating potential fluctuations (FPF). The method of false nearest neighbourhood is deployed on the FPF's to find a good embedding so as to be acquainted with the precise knowledge of m, which is desirable for carrying out DVV analysis. The emergence of nonlinearity with increase in discharge voltage has been ensured by taking into consideration the total energy present in different band of frequencies excited due to nonlinear processes. Rejection of null hypothesis has been verified by performing the rank test method that confirms the presence of nonlinearity quantitatively.

  11. Investigation and quantification of nonlinearity using surrogate data in a glow discharge plasma

    NASA Astrophysics Data System (ADS)

    Saha, Debajyoti; Shaw, Pankaj Kumar; Ghosh, Sabuj; Janaki, M. S.; Sekar Iyengar, A. N.

    2015-02-01

    Detection of nonlinearity has been carried out in periodic and aperiodic floating potential fluctuations of DC glow discharge plasma by generating surrogate data using iterative amplitude adjusted Fourier transform method. We introduce "delay vector variance" analysis (DVV) for the first time, which allows reliable detection of nonlinearity and provides some easy to interpret diagram conveying information about the nature of the experimental floating potential fluctuations (FPF). The method of false nearest neighbourhood is deployed on the FPF's to find a good embedding so as to be acquainted with the precise knowledge of m, which is desirable for carrying out DVV analysis. The emergence of nonlinearity with increase in discharge voltage has been ensured by taking into consideration the total energy present in different band of frequencies excited due to nonlinear processes. Rejection of null hypothesis has been verified by performing the rank test method that confirms the presence of nonlinearity quantitatively.

  12. Modeling the influence of anode cathode spacing in a pulsed discharge nozzle

    NASA Astrophysics Data System (ADS)

    Broks, B. H. P.; Brok, W. J. M.; Remy, J.; van der Mullen, J. J. A. M.; Benidar, A.; Biennier, L.; Salama, F.

    2005-11-01

    The pulsed discharge nozzle (PDN) is a spectrochemical source that is designed to produce and cool molecular ions in an astrophysically relevant environment in the laboratory with limited fragmentation. In order to gain a better understanding of the PDN and to optimize the yield of molecular ions and radicals in the PDN source, a parameter study of the influence of the interelectrode distance on the plasma properties is carried out by means of a discharge model, providing a qualitative as well as a quantitative picture of the plasma. We model the electron density and energy, as well as the argon ion and metastable atom number density for various interelectrode distances. The results reveal that increasing the interelectrode distance does not significantly influence the plasma at the cathode and at the anode. However, a positive column forms between the electrodes, which increases in length as the interelectrode distance increases. This is an additional evidence that the PDN is a glow discharge. This positive column does not contribute significantly to the formation of metastable argon atoms. Because metastable argon is thought to be the primary agent in the formation of molecular ions through Penning ionization of the neutral molecular precursor there is no benefit to be expected from an increase of the interelectrode distance. In fact, electron impact dissociation of the molecules in the column might even make the source less efficient for longer column lengths. The simulations presented here provide physical insight into the characteristics of interstellar species analogs in laboratory experiments.

  13. Sharp transition between two regimes of operation of dc discharge with two anodes and thermionic emission from cathode

    SciTech Connect

    Mustafaev, A. S.; Grabovskiy, A.; Demidov, V. I.; Kaganovich, I. D.; Koepke, M. E.

    2014-05-15

    In a dc discharge plasma with two anodes and thermionic emission from cathode, the two anodes are used for plasma control. The main anode is placed between the cathode and the other auxiliary anode has a circular opening for passing electron current from the cathode to the second anode. It is experimentally demonstrated that a plasma may exhibit a sudden transition between two quasi-stable conditions as one increases the cathode-electron current collected by the auxiliary anode through an aperture, i.e., hole, in the main anode. In one regime, a bright glowing “ball-shaped double layer” appears on the plasma side having a potential drop of 10–15 eV and concomitant ionization in the neighboring region attached to the opening. The second regime is characterized by a uniform potential profile in plasma and an absence of the ball-shaped double layer. The transition between these regimes is accompanied by a significant change in plasma properties, such as the electron energy distribution function (EEDF). Controlling the EEDF is a valuable capability in technological applications. Increasing the gas pressure leads to the elimination of the first regime for sufficiently high gas pressure, the threshold being a few Torr. The disappearance of a regime transition can be explained by invoking an EEDF transition, from being nonlocal at low pressure to becoming local at high pressure. Local EEDF is determined by local values of electric field. Nonlocal EEDF is determined by electric field values elsewhere, and the electron can travel without energy loss over a path much longer than the discharge dimension.

  14. High frequency glow discharges at atmospheric pressure with micro-structured electrode arrays

    NASA Astrophysics Data System (ADS)

    Baars-Hibbe, L.; Sichler, P.; Schrader, C.; Lucas, N.; Gericke, K.-H.; Büttgenbach, S.

    2005-02-01

    Micro-structured electrode (MSE) arrays allow the generation of large-area uniform glow discharges over a wide pressure range up to atmospheric pressure. The electrode widths, thicknesses and distances in the micrometre range are realized by means of modern micro-machining and galvanic techniques. The electrode distance, the gap width d, is small enough to generate sufficiently high electric field strengths to ignite gas discharges by applying only moderate radio frequency (RF, 13.56 MHz) voltages (80-390 V in Ne, He, Ar, N2 and air). The non-thermal plasma system is characterized by a special probe measuring the electric parameters. We tested MSE arrays with d = 70, 25 and 15 µm. The MSE driven plasmas show a different behaviour from conventional RF discharge plasmas. Due to the very small electrode gap width we can describe the behaviour of the charged particles in the RF field of our system with the dc Townsend breakdown theory, depending on the pressure range and gas. With decreasing pressure, the gas discharges, especially in Ne and He, are increasingly dominated by field electron emission. With the MSE arrays as plasma sources several applications were developed and successfully tested, e.g. decomposition of waste gases and sterilization of food packaging materials at atmospheric pressure.

  15. Hybrid modelling of open glow discharge with account of nonlocal ionization by fast electrons

    NASA Astrophysics Data System (ADS)

    Eliseev, Stepan; Eremin, Denis; Kudryavtsev, Anatoly

    2015-11-01

    Cage and open discharges as well as hollow cathode devices are used for creating negative glow plasma. In order to perform numerical simulations of such kind of plasma object properly it is necessary to account for nonlocal excitation and ionization induced by fast electrons emitted from cathode and accelerated up to energies 102-103eV in cathode voltage drop. In this work a numerical study of open discharge in argon is presented. Simulations were performed using simple hybrid model that incorporates nonlocal ionization by fast electrons into ``extended'' fluid framework. Electron energy balance is written with account of electron heating due to coulomb interaction between ``bulks'' (with energies less than 1eV) and ``intermediate'' electrons (with energies up to inelastic collisions energy threshold). Distributions of main discharge parameters, such charged particle densities, electron temperature, electric potential, current-voltage characteristics of the discharge were obtained. Comparison with experimental results showed good agreement and suggests good applicability of the model. This work was supported by Russian Science Foundation (project #14-19-00311).

  16. Study of a contracted glow in low-frequency plasma-jet discharges operating with argon

    NASA Astrophysics Data System (ADS)

    Minotti, F.; Giuliani, L.; Xaubet, M.; Grondona, D.

    2015-11-01

    In this work, we present an experimental and theoretical study of a low frequency, atmospheric plasma-jet discharge in argon. The discharge has the characteristics of a contracted glow with a current channel of submillimeter diameter and a relatively high voltage cathode layer. In order to interpret the measurements, we consider the separate modeling of each region of the discharge: main channel and cathode layer, which must then be properly matched together. The main current channel was modeled, extending a previous work, as similar to an arc in which joule heating is balanced by lateral heat conduction, without thermal equilibrium between electrons and heavy species. The cathode layer model, on the other hand, includes the emission of secondary electrons by ion impact and by additional mechanisms, of which we considered emission due to collision of atoms excited at metastable levels, and field-enhanced thermionic emission (Schottky effect). The comparison of model and experiment indicates that the discharge can be effectively sustained in its contracted form by the secondary electrons emitted by collision of excited argon atoms, whereas thermionic emission is by far insufficient to provide the necessary electrons.

  17. Study of a contracted glow in low-frequency plasma-jet discharges operating with argon

    SciTech Connect

    Minotti, F.; Giuliani, L.; Xaubet, M.; Grondona, D.

    2015-11-15

    In this work, we present an experimental and theoretical study of a low frequency, atmospheric plasma-jet discharge in argon. The discharge has the characteristics of a contracted glow with a current channel of submillimeter diameter and a relatively high voltage cathode layer. In order to interpret the measurements, we consider the separate modeling of each region of the discharge: main channel and cathode layer, which must then be properly matched together. The main current channel was modeled, extending a previous work, as similar to an arc in which joule heating is balanced by lateral heat conduction, without thermal equilibrium between electrons and heavy species. The cathode layer model, on the other hand, includes the emission of secondary electrons by ion impact and by additional mechanisms, of which we considered emission due to collision of atoms excited at metastable levels, and field-enhanced thermionic emission (Schottky effect). The comparison of model and experiment indicates that the discharge can be effectively sustained in its contracted form by the secondary electrons emitted by collision of excited argon atoms, whereas thermionic emission is by far insufficient to provide the necessary electrons.

  18. Modeling a short dc discharge with thermionic cathode and auxiliary anode

    SciTech Connect

    Bogdanov, E.; Demidov, V. I.; Kaganovich, I. D.; Koepke, M. E.; Kudryavtsev, A. A.

    2013-10-15

    A short dc discharge with a thermionic cathode can be used as a current and voltage stabilizer, but is subject to current oscillation. If instead of one anode two anodes are used, the current oscillations can be reduced. We have developed a kinetic model of such a discharge with two anodes, where the primary anode has a small opening for passing a fraction of the discharge current to an auxiliary anode. The model demonstrates that the current-voltage relationship of the discharge with two anodes is characterized everywhere by positive slope, i.e., positive differential resistance. Therefore, the discharge with two anodes is expected to be stable to the spontaneous oscillation in current that is induced by negative differential resistance. As a result, such a discharge can be used in an engineering application that requires stable plasma, such as a current and voltage stabilizer.

  19. Magnetic dipole discharges. II. Cathode and anode spot discharges and probe diagnostics

    SciTech Connect

    Stenzel, R. L.; Urrutia, J. M.; Ionita, C.; Schrittwieser, R.

    2013-08-15

    The high current regime of a magnetron-type discharge has been investigated. The discharge uses a permanent magnet as a cold cathode which emits secondary electrons while the chamber wall or a grounded electrode serves as the anode. As the discharge voltage is increased, the magnet develops cathode spots, which are short duration arcs that provide copious electrons to increase the discharge current dramatically. Short (1 μs), high current (200 A) and high voltage (750 V) discharge pulses are produced in a relaxation instability between the plasma and a charging capacitor. Spots are also observed on a negatively biased plane Langmuir probe. The probe current pulses are as large as those on the magnet, implying that the high discharge current does not depend on the cathode surface area but on the properties of the spots. The fast current pulses produce large inductive voltages, which can reverse the electrical polarity of the magnet and temporarily operate it as an anode. The discharge current may also oscillate at the frequency determined by the charging capacitor and the discharge circuit inductance. Each half cycle of high-current current pulses exhibits a fast (≃10 ns) current rise when a spot is formed. It induces high frequency (10–100 MHz) transients and ringing oscillations in probes and current circuits. Most probes behave like unmatched antennas for the electromagnetic pulses of spot discharges. Examples are shown to distinguish the source of oscillations and some rf characteristics of Langmuir probes.

  20. Modelling the interaction between the plasma and the neutral gas in a pulsed glow discharge in nitrogen

    SciTech Connect

    Guiberteau, E.; Bonhomme, G.; Zoheir, C.

    1995-12-31

    We present here the first results obtained from the modelling of a pulsed glow discharge in nitrogen, taking into account the heat transfer to the neutral gas. The aim of modelling is to optimize the plasma process in a nitriding reactor. The iron sample to be nitrided forms the cathode of the glow discharge at low pressure (100 to 200 Pa). The reactor uses two disks of diameter 50 mm as electrodes with a 40 mm gap. It works in a pulsed regime (cycle period varies from 10 to 100 ms) with a discharge duration which can be varied from 0.5 to 10 ms. Experimental studies have been carried out using emission spectroscopy resolved in space (1 mm) and time (1 {mu}s), under various discharge and post-discharge durations. These studies have shown the important effect of energy transfer from the discharge to the neutral gas. In fact this transfer produces an expansion of the negative glow observed when the post-discharge duration is decreased. A realistic modelling should thus be performed bearing in mind that the neutral gas behaves not as a thermostat. Consequently the thermal and hydrodynamic evolution of the neutral gas must be considered in the whole modelling.

  1. The influence of resonance radiation transport on the contraction of a glow discharge in argon

    NASA Astrophysics Data System (ADS)

    Golubovskii, Yu B.; Maiorov, V. A.

    2015-04-01

    The role of resonance radiation transport in the contraction of a positive column in an argon glow discharge is studied numerically. The theory is based on the self-consistent solution of the ambipolar diffusion equation for electrons, the diffusion equation for metastable atoms and the Biberman-Holstein equation for resonance atoms. To calculate the ionization and excitation rates, the Boltzmann equation is solved in a local approximation taking into account elastic, inelastic and electron-electron collisions. A solution method for a boundary problem is developed which allows one to obtain a hysteresis of the parameters during a continuous transition from a diffuse mode to a contracted mode through an unstable branch. At small currents there is a diffuse discharge where the role of radiation transport is inessential because the radial distributions of electrons and excited atoms are close to the fundamental modes of the corresponding equations. Under these conditions, the traditional approximation of ‘effective lifetime’ is accurate enough. For a contracted discharge, this approximation is not applicable because the higher diffusion and radiation modes play a notable role and a more strict description of radiation transport is required. It is shown that, when radiation transport is taken into account, the width of a filament in a contracted discharge significantly exceeds that obtained in the traditional ‘effective lifetime’ approximation. The critical current, when the discharge abruptly turns into a contracted mode, is shifted towards higher current values. The results obtained in this paper can also relate to a discharge in other inert gases.

  2. Account of nonlocal ionization by fast electrons in the fluid models of a direct current glow discharge

    SciTech Connect

    Rafatov, I.; Bogdanov, E. A.; Kudryavtsev, A. A.

    2012-09-15

    We developed and tested a simple hybrid model for a glow discharge, which incorporates nonlocal ionization by fast electrons into the 'simple' and 'extended' fluid frameworks. Calculations have been performed for an argon gas. Comparison with the experimental data as well as with the hybrid (particle) and fluid modelling results demonstated good applicability of the proposed model.

  3. High deposition rate preparation of amorphous silicon solar cells by rf glow discharge decomposition of disilane

    SciTech Connect

    Kenne, J.; Ohashi, Y.; Matsushita, T.; Konagai, M.; Takahashi, K.

    1984-01-15

    The optical and electrical properties of hydrogenated amorphous silicon films produced by rf glow discharge decomposition of disilane diluted in helium (Si/sub 2/H/sub 6//He = 1/9) have been studied while systematically varying the film deposition rate. The properties and composition of the films were monitored by measuring the optical band gap, IR vibrational spectrum, dark conductivity, and the photoconductivity as a function of the deposition rate. The photoluminescence of the high deposition rate films gave a peak at 1.33 eV. These films, whose properties are rather similar to those of the conventional a-Si:H films prepared from monosilane, have been used to fabricate nip-type a-Si:H solar cells. At a deposition rate of 11 A/sec, a conversion efficiency of 6.86% was obtained. This high efficiency shows that disilane is applicable for mass production fabrication of a-Si:H solar cells.

  4. Heterodyne detection at 300 GHz using neon indicator lamp glow discharge detector.

    PubMed

    Aharon Akram, Avihai; Rozban, Daniel; Kopeika, Natan S; Abramovich, Amir

    2013-06-10

    A miniature neon indicator lamp, also known as a glow discharge detector (GDD), costing about 50 cents, was found to be an excellent room temperature terahertz radiation detector. Proof-of-concept 300 GHz heterodyne detection using GDD is demonstrated in this paper. Furthermore, a comparison to direct detection was carried out as well. Previous results with the GDD at 10 GHz showed 40 times better sensitivity using heterodyne detection compared to direct detection. Preliminary results at 300 GHz showed better sensitivity by a factor of 20 with only 56 μW local-oscillator power using heterodyne compared to direct detection. The higher the local-oscillator power (P(lo)), the better the sensitivity of the detector. Further improvement can be achieved by employing better quasi-optical design. PMID:23759859

  5. Observation of dust torus with poloidal rotation in direct current glow discharge plasma

    SciTech Connect

    Kaur, Manjit Bose, Sayak; Chattopadhyay, P. K. Sharma, Devendra; Ghosh, J.; Saxena, Y. C.

    2015-03-15

    Observation of dust cloud rotation in parallel-plate DC glow discharge plasma is reported here. The experiments are carried out at high pressures (∼130 Pa) with a metallic ring placed on the lower electrode (cathode). The dust cloud rotates poloidally in the vertical plane near the cathode surface. This structure is continuous toroidally. Absence of magnetic field rules out the possibility of E × B induced ion flow as the cause of dust rotation. The dust rotational structures exist even with water cooled cathode. Therefore, temperature gradient driven mechanisms, such as thermophoretic force, thermal creep flow, and free convection cannot be causing the observed dust rotation. Langmuir probe measurement reveals the existence of a sharp density gradient near the location of the rotating dust cloud. The gradient in the density, giving rise to a gradient in the ion drag force, has been identified as the principal cause behind the rotation of dust particles.

  6. A novel Y-type reactor for selective excitation of atmospheric pressure glow discharge plasma

    NASA Astrophysics Data System (ADS)

    Xia, Guan-Guang; Wang, Jin-Yun; Huang, Aimin; Suib, Steven L.; Hayashi, Yuji; Matsumoto, Hiroshige

    2001-02-01

    A novel Y-type atmospheric pressure ac glow discharge plasma reactor has been designed and tested in CO reduction with hydrogen and the reverse water-gas shift reaction. The reactor consists of a Y-type quartz tube with an angle of 120°-180° between the two long arms, two metal rod electrodes serving as high voltage terminals and two pieces of aluminum foil which were wrapped outside of the quartz tubes as a ground electrode. Different combinations of input power applied on this three- electrode system can lead to selective plasmas on one side, two sides, or can also generate a stable arc between the two high voltage terminal electrodes. The ability to selectively activate different species with this type of apparatus can help to minimize side reactions in plasmas to obtain desirable products. The Y-type reactor may provide a novel means to study fundamental problems regarding radical reactions.

  7. In-situ reactive of x-ray optics by glow discharge

    SciTech Connect

    Johnson, E.D.; Garrett, R.F.

    1987-01-01

    We have developed a method of in-situ reactive glow discharge cleaning of x-ray optical surfaces which is capable of complete removal of carbon contamination. Our work is the first to successfully clean an entire optical system in-situ and characterize its performance at short wavelengths (as low as 10 /angstrom/). The apparatus required is quite simple and can easily be fitted to most existing UHV (ultra high vacuum) mirror boxes of monochromators. The advantages of this technique over previously available methods include dramatic improvements in instrument performance and reductions in down time since the whole process typically takes a few days. This paper will briefly describe our results and detail the experimental considerations for application of the technique on different monochromator geometries. Possible improvements and extensions of the technique are also discussed.

  8. PROGRESS IN 2 mm GLOW DISCHARGE POLYMER MANDREL DEVELOPMENT FOR NIF

    SciTech Connect

    NIKROO,A; BOUSQUET,J; COOK,R; McQUILLAN,B.W; PAGUIO,R; TAKAGI,M

    2003-06-01

    OAK-B135 All planned National Ignition Facility (NIF) capsule targets except machined beryllium require a glow discharge polymer (GDP) mandrel upon which the albator is applied. This mandrel, {approx} 2 mm in diameter, must at least meet if not exceed the symmetry and surface finish requirements of the final capsule. Such mandrels are currently produced by the three-step depolymerizable mandrel technique. The quality of the final mandrel depends upon precise optimization and execution of each of the three steps. They had shown previously that fabrication of a mandrel which met the symmetry and surface finish requirements was feasible using this technique. In this paper they will discuss recent progress towards converting this process into a high yield, production scale process.

  9. Design and construction of uniform glow discharge plasma system operating under atmospheric condition

    SciTech Connect

    Kocum, C.; Ayhan, H.

    2007-06-15

    The design of a uniform glow discharge plasma system operating without vacuum is presented. A full-bridge switching circuit was used to switch the transformers. The primary windings of transformers were connected in parallel, but in opposite phase to double the output voltage. Theoretically, 20 000 V{sub pp} was obtained. Rectangle copper electrodes were used, and placed parallel to each other. To prevent the spark production that is, to obtain uniformity, two 2 mm Teflon sheets were glued to the electrodes. However, it was observed that the operating frequency also affected the uniformity. For the system presented here, the frequency at which more uniformity was obtained was found to be 14 kHz.

  10. Analysis of glow discharges for understanding the process of film formation

    NASA Technical Reports Server (NTRS)

    Venugopalan, M.; Avni, R.

    1984-01-01

    The physical and chemical processes which occur during the formation of different types of films in a variety of glow discharge plasmas are discussed. Emphasis is placed on plasma diagnostic experiments using spectroscopic methods, probe analysis, mass spectrometric sampling and magnetic resonance techniques which are well suited to investigate the neutral and ionized gas phase species as well as some aspects of plasma surface interactions. The results on metallic, semi-conducting and insulating films are reviewed in conjunction with proposed models and the problem encountered under film deposition conditions. It is concluded that the understanding of film deposition process requires additional experimental information on plasma surface interactions of free radicals and the synergetic effects where photon, electron and ion bombardment change the reactivity of the incident radical with the surface.