Science.gov

Sample records for appendixes include materials

  1. Gas storage materials, including hydrogen storage materials

    DOEpatents

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2014-11-25

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  2. Gas storage materials, including hydrogen storage materials

    DOEpatents

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  3. Multinational Exchange Mechanisms of Educational Audio-Visual Materials. Appendixes.

    ERIC Educational Resources Information Center

    Center of Studies and Realizations for Permanent Education, Paris (France).

    These appendixes contain detailed information about the existing audiovisual material exchanges which served as the basis for the analysis contained in the companion report. Descriptions of the objectives, structure, financing and services of the following national and international organizations are included: (1) Educational Resources Information…

  4. Adult Education Literacy Instruction. Appendix: Tables of Studies Included in the Review

    ERIC Educational Resources Information Center

    National Institute for Literacy, 2010

    2010-01-01

    Included here are two appendixes to "Adult Education Literacy Instruction: A Review of the Research." Appendix A, "Adult Studies," contains: (1) Assessment Profiles; (2) Alphabetics; (3) Fluency; (4) Vocabulary; and (5) Comprehension. Appendix B, "Adolescent Studies," contains: (1) Alphabetics; (2) Fluency; (3) Vocabulary; and (4) Comprehension.


  5. Nine Model Programs for Young Children: Appendix of Supplementary Materials. Volume II.

    ERIC Educational Resources Information Center

    Quillian, Benjamin F., Jr.; Rogers, Kathryn S.

    This appendix to the National Program on Early Childhood Education (NPECE) Survey contains materials intended to provide additional information about six of the nine programs described in the survey. The materials include: (1) narrative descriptions of cooking and reading experiences for the Tucson Early Education Model; (2) information on…

  6. Great Lakes Region Special Education Instructional Materials Center. Appendixes, Volume 1: Appendix A and B (to page 432). Final Technical Report.

    ERIC Educational Resources Information Center

    Alonso, Lou

    The first of three volumes of appendixes to the final technical report of the Great Lakes Region Special Education Instructional Materials Center (GLR SEIMC) contains materials related to the Introduction (Appendix A) and the chapter on field services (Appendix B) of the final report. Contained in Appendix A are the subcontracts of the GLR SEIMC…

  7. Armor systems including coated core materials

    SciTech Connect

    Chu, Henry S.; Lillo, Thomas M.; McHugh, Kevin M.

    2012-07-31

    An armor system and method involves providing a core material and a stream of atomized coating material that comprises a liquid fraction and a solid fraction. An initial layer is deposited on the core material by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is less than the liquid fraction of the stream of atomized coating material on a weight basis. An outer layer is then deposited on the initial layer by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is greater than the liquid fraction of the stream of atomized coating material on a weight basis.

  8. Armor systems including coated core materials

    DOEpatents

    2013-10-08

    An armor system and method involves providing a core material and a stream of atomized coating material that comprises a liquid fraction and a solid fraction. An initial layer is deposited on the core material by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is less than the liquid fraction of the stream of atomized coating material on a weight basis. An outer layer is then deposited on the initial layer by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is greater than the liquid fraction of the stream of atomized coating material on a weight basis.

  9. 49 CFR Appendix C to Part 544 - Motor Vehicle Rental and Leasing Companies (Including Licensees and Franchisees) Subject to the...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... (Including Licensees and Franchisees) Subject to the Reporting Requirements of Part 544 C Appendix C to Part... SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION INSURER REPORTING REQUIREMENTS Pt. 544, App. C Appendix C to Part 544—Motor Vehicle Rental and Leasing Companies (Including Licensees and...

  10. 49 CFR Appendix C to Part 544 - Motor Vehicle Rental and Leasing Companies (Including Licensees and Franchisees) Subject to the...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... (Including Licensees and Franchisees) Subject to the Reporting Requirements of Part 544 C Appendix C to Part... SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION INSURER REPORTING REQUIREMENTS Pt. 544, App. C Appendix C to Part 544—Motor Vehicle Rental and Leasing Companies (Including Licensees and...

  11. 10 CFR Appendix M to Part 110 - Categorization of Nuclear Material d

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Categorization of Nuclear Material d M Appendix M to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. M Appendix M to Part 110—Categorization of Nuclear Material d Material Form...

  12. 10 CFR Appendix M to Part 110 - Categorization of Nuclear Material d

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Categorization of Nuclear Material d M Appendix M to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. M Appendix M to Part 110—Categorization of Nuclear Material d Material Form...

  13. 10 CFR Appendix M to Part 110 - Categorization of Nuclear Material d

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Categorization of Nuclear Material d M Appendix M to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. M Appendix M to Part 110—Categorization of Nuclear Material d Material Form...

  14. Microwave heating of lunar materials. Appendix A

    NASA Technical Reports Server (NTRS)

    Meek, Thomas T.

    1992-01-01

    Microwave heating of nonmetallic inorganic material has been of interest for many years. Von Hippel in the late 1940's and early 1950's investigated how microwave radiation up to 10 GHz couples to various insulator materials. Perhaps the most work has been done by Wayne Tinga at the University of Edmonton. Most of the work to date has been done at the two frequency bands allowed in industrial use (0.915 GHz and 2.45 GHz). However some work has recently been carried out at 28 GHz and 60 GHz. Work done in this area at Los Alamos National Laboratory is discussed.

  15. 48 CFR Appendix F to Chapter 2 - Material Inspection and Receiving Report

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Material Inspection and Receiving Report F Appendix F to Chapter 2 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE Ch. 2, App. F Appendix F to Chapter 2—Material Inspection and Receiving Report Part 1—Introduction Sec....

  16. 10 CFR Appendix M to Part 110 - Categorization of Nuclear Material d

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Categorization of Nuclear Material d M Appendix M to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. M Appendix M to Part 110—Categorization of Nuclear Material d Material Form Category I II III e 1. Plutonium a Unirradiated b 2...

  17. 10 CFR Appendix M to Part 110 - Categorization of Nuclear Material d

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Categorization of Nuclear Material d M Appendix M to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. M Appendix M to Part 110—Categorization of Nuclear Material d Material Form Category I II III e 1. Plutonium a Unirradiated b 2...

  18. 15 CFR Appendix C to Subpart M of... - Dredged Material Disposal Sites Within the Sanctuary

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 3 2014-01-01 2014-01-01 false Dredged Material Disposal Sites Within the Sanctuary C Appendix C to Subpart M of Part 922 Commerce and Foreign Trade Regulations Relating to... National Marine Sanctuary Pt. 922, Subpt. M, App. C Appendix C to Subpart M of Part 922—Dredged...

  19. 15 CFR Appendix C to Subpart M of... - Dredged Material Disposal Sites Within the Sanctuary

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 3 2013-01-01 2013-01-01 false Dredged Material Disposal Sites Within the Sanctuary C Appendix C to Subpart M of Part 922 Commerce and Foreign Trade Regulations Relating to... National Marine Sanctuary Pt. 922, Subpt. M, App. C Appendix C to Subpart M of Part 922—Dredged...

  20. 15 CFR Appendix C to Subpart M of... - Dredged Material Disposal Sites Within the Sanctuary

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 3 2011-01-01 2011-01-01 false Dredged Material Disposal Sites Within the Sanctuary C Appendix C to Subpart M of Part 922 Commerce and Foreign Trade Regulations Relating to... National Marine Sanctuary Pt. 922, Subpt. M, App. C Appendix C to Subpart M of Part 922—Dredged...

  1. 15 CFR Appendix C to Subpart M of... - Dredged Material Disposal Sites Within the Sanctuary

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 3 2012-01-01 2012-01-01 false Dredged Material Disposal Sites Within the Sanctuary C Appendix C to Subpart M of Part 922 Commerce and Foreign Trade Regulations Relating to... National Marine Sanctuary Pt. 922, Subpt. M, App. C Appendix C to Subpart M of Part 922—Dredged...

  2. 15 CFR Appendix C to Subpart M of... - Dredged Material Disposal Sites Within the Sanctuary

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Dredged Material Disposal Sites Within the Sanctuary C Appendix C to Subpart M of Part 922 Commerce and Foreign Trade Regulations Relating to... National Marine Sanctuary Pt. 922, Subpt. M, App. C Appendix C to Subpart M of Part 922—Dredged...

  3. 15 CFR Appendix 1 to Part 960 - Filing Instructions and Information To Be Included in the Licensing Application

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 3 2011-01-01 2011-01-01 false Filing Instructions and Information To Be Included in the Licensing Application 1 Appendix 1 to Part 960 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL...

  4. 30 CFR 254.29 - What information must I include in the “Training and drills” appendix?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What information must I include in the ĂąTraining and drillsĂą appendix? 254.29 Section 254.29 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST...

  5. 30 CFR 254.26 - What information must I include in the “Worst case discharge scenario” appendix?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What information must I include in the ĂąWorst case discharge scenarioĂą appendix? 254.26 Section 254.26 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE...

  6. 30 CFR 254.27 - What information must I include in the “Dispersant use plan” appendix?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What information must I include in the ĂąDispersant use planĂą appendix? 254.27 Section 254.27 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST...

  7. 30 CFR 254.25 - What information must I include in the “Contractual agreements” appendix?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What information must I include in the ĂąContractual agreementsĂą appendix? 254.25 Section 254.25 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST...

  8. 30 CFR 254.28 - What information must I include in the “In situ burning plan” appendix?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What information must I include in the ĂąIn situ burning planĂą appendix? 254.28 Section 254.28 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST...

  9. 30 CFR 254.24 - What information must I include in the “Equipment inventory” appendix?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What information must I include in the ĂąEquipment inventoryĂą appendix? 254.24 Section 254.24 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST...

  10. 15 CFR Appendix 1 to Part 960 - Filing Instructions and Information To Be Included in the Licensing Application

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 3 2012-01-01 2012-01-01 false Filing Instructions and Information To Be Included in the Licensing Application 1 Appendix 1 to Part 960 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL...

  11. 10 CFR Appendix E to Part 835 - Values for Establishing Sealed Radioactive Source Accountability and Radioactive Material Posting...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Accountability and Radioactive Material Posting and Labeling Requirements E Appendix E to Part 835 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Pt. 835, App. E Appendix E to Part 835—Values for... Requirements The data presented in appendix E are to be used for identifying accountable sealed...

  12. Appendix.

    ERIC Educational Resources Information Center

    Naturescope, 1987

    1987-01-01

    Contains a glossary of terms related to endangered species and lists reference books, children's books, audio-visual materials, software, and activity sources on the topics. Also identifies wildlife laws and explains what they mean. An index of issues of "Ranger Rick," which includes articles on endangered species, is included. (ML)

  13. 32 CFR Appendix D to Part 37 - What Common National Policy Requirements May Apply and Need To Be Included in TIAs?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... rule about lobbying prohibitions, which is implemented by the DoD at 32 CFR part 28. The prohibitions apply to all financial assistance. Appendix A to 32 CFR part 22 includes a sample provision that you may... conditions, or assurances. Appendix B to 32 CFR part 22 lists national policy requirements that...

  14. Data summary of municipal solid waste management alternatives. Volume 7, Appendix E -- Material recovery/material recycling technologies

    SciTech Connect

    1992-10-01

    The enthusiasm for and commitment to recycling of municipal solid wastes is based on several intuitive benefits: Conservation of landfill capacity; Conservation of non-renewable natural resources and energy sources; Minimization of the perceived potential environmental impacts of MSW combustion and landfilling; Minimization of disposal costs, both directly and through material resale credits. In this discussion, ``recycling`` refers to materials recovered from the waste stream. It excludes scrap materials that are recovered and reused during industrial manufacturing processes and prompt industrial scrap. Materials recycling is an integral part of several solid waste management options. For example, in the preparation of refuse-derived fuel (RDF), ferrous metals are typically removed from the waste stream both before and after shredding. Similarly, composting facilities, often include processes for recovering inert recyclable materials such as ferrous and nonferrous metals, glass, Plastics, and paper. While these two technologies have as their primary objectives the production of RDF and compost, respectively, the demonstrated recovery of recyclables emphasizes the inherent compatibility of recycling with these MSW management strategies. This appendix discusses several technology options with regard to separating recyclables at the source of generation, the methods available for collecting and transporting these materials to a MRF, the market requirements for post-consumer recycled materials, and the process unit operations. Mixed waste MRFs associated with mass bum plants are also presented.

  15. Methods of using structures including catalytic materials disposed within porous zeolite materials to synthesize hydrocarbons

    DOEpatents

    Rollins, Harry W. (Idaho Falls, ID); Petkovic, Lucia M. (Idaho Falls, ID); Ginosar, Daniel M. (Idaho Falls, ID)

    2011-02-01

    Catalytic structures include a catalytic material disposed within a zeolite material. The catalytic material may be capable of catalyzing a formation of methanol from carbon monoxide and/or carbon dioxide, and the zeolite material may be capable of catalyzing a formation of hydrocarbon molecules from methanol. The catalytic material may include copper and zinc oxide. The zeolite material may include a first plurality of pores substantially defined by a crystal structure of the zeolite material and a second plurality of pores dispersed throughout the zeolite material. Systems for synthesizing hydrocarbon molecules also include catalytic structures. Methods for synthesizing hydrocarbon molecules include contacting hydrogen and at least one of carbon monoxide and carbon dioxide with such catalytic structures. Catalytic structures are fabricated by forming a zeolite material at least partially around a template structure, removing the template structure, and introducing a catalytic material into the zeolite material.

  16. Materials issues in some advanced forming techniques, including superplasticity

    SciTech Connect

    Wadsworth, J.; Henshall, G.A.; Nieh, T.G.

    1995-08-22

    From mechanics and macroscopic viewpoints, the sensitivity of the flow stress of a material to the strain rate, i.e. the strain rate sensitivity (m), governs the development of neck formation and therefore has a strong influence on the tensile ductility and hence formability of materials. Values of strain rate sensitivity range from unity, for the case of Newtonian viscous materials, to less than 0.1 for some dispersion strengthened alloys. Intermediate values of m = 0.5 are associated with classical superplastic materials which contain very fine grain sizes following specialized processing. An overview is given of the influence of strain rate sensitivity on tensile ductility and of the various materials groups that can exhibit high values of strain rate sensitivity. Recent examples of enhanced formability (or extended tensile ductility) in specific regimes between m = 1 and m = 0.3 are described, and potential areas for commercial exploitation are noted. These examples include: internal stress superplasticity, superplastic ceramics, superplastic intermetallics, superplastic laminated composites, superplastic behavior over six orders of magnitude of strain rate in a range of aluminum-based alloys and composites, and enhanced ductility in Al-Mg alloys that require no special processing for microstructural development.

  17. Composite material including nanocrystals and methods of making

    DOEpatents

    Bawendi, Moungi G. (Boston, MA); Sundar, Vikram C. (New York, NY)

    2008-02-05

    Temperature-sensing compositions can include an inorganic material, such as a semiconductor nanocrystal. The nanocrystal can be a dependable and accurate indicator of temperature. The intensity of emission of the nanocrystal varies with temperature and can be highly sensitive to surface temperature. The nanocrystals can be processed with a binder to form a matrix, which can be varied by altering the chemical nature of the surface of the nanocrystal. A nanocrystal with a compatibilizing outer layer can be incorporated into a coating formulation and retain its temperature sensitive emissive properties

  18. Composite material including nanocrystals and methods of making

    DOEpatents

    Bawendi, Moungi G.; Sundar, Vikram C.

    2010-04-06

    Temperature-sensing compositions can include an inorganic material, such as a semiconductor nanocrystal. The nanocrystal can be a dependable and accurate indicator of temperature. The intensity of emission of the nanocrystal varies with temperature and can be highly sensitive to surface temperature. The nanocrystals can be processed with a binder to form a matrix, which can be varied by altering the chemical nature of the surface of the nanocrystal. A nanocrystal with a compatibilizing outer layer can be incorporated into a coating formulation and retain its temperature sensitive emissive properties.

  19. Special nuclear materials cutoff exercise: Issues and lessons learned, Volume 2 of 3: Appendixes A - C

    SciTech Connect

    Libby, R.A.; Davis, C.; Segal, J.E.; Stanbro, W.D.

    1995-08-01

    This document is the 2nd volume of the three volume set from the Special Nuclear Materials Cutoff Exercise held at Hanford in 1994. Volume 2 contains Appendices A-C, with Appendices A and B containing a discussion of the design of the PUREX process and Appendix C containing a discussion of the safeguards measures for the PUREX facility.

  20. 10 CFR Appendix H to Part 50 - Reactor Vessel Material Surveillance Program Requirements

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... in the fracture toughness properties of ferritic materials in the reactor vessel beltline region of... and the thermal environment. Under the program, fracture toughness test data are obtained from... specified in paragraph III.B.1 of this appendix, and the results of all fracture toughness tests...

  1. 10 CFR Appendix H to Part 50 - Reactor Vessel Material Surveillance Program Requirements

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... in the fracture toughness properties of ferritic materials in the reactor vessel beltline region of... and the thermal environment. Under the program, fracture toughness test data are obtained from... specified in paragraph III.B.1 of this appendix, and the results of all fracture toughness tests...

  2. 15 CFR Appendix D to Subpart M of... - Dredged Material Disposal Sites Adjacent to the Monterey Bay National Marine Sanctuary

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Adjacent to the Monterey Bay National Marine Sanctuary D Appendix D to Subpart M of Part 922 Commerce and... SANCTUARY PROGRAM REGULATIONS Monterey Bay National Marine Sanctuary Pt. 922, Subpt. M, App. D Appendix D to Subpart M of Part 922—Dredged Material Disposal Sites Adjacent to the Monterey Bay National...

  3. 15 CFR Appendix D to Subpart M of... - Dredged Material Disposal Sites Adjacent to the Monterey Bay National Marine Sanctuary

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Adjacent to the Monterey Bay National Marine Sanctuary D Appendix D to Subpart M of Part 922 Commerce and... SANCTUARY PROGRAM REGULATIONS Monterey Bay National Marine Sanctuary Pt. 922, Subpt. M, App. D Appendix D to Subpart M of Part 922—Dredged Material Disposal Sites Adjacent to the Monterey Bay National...

  4. 15 CFR Appendix D to Subpart M of... - Dredged Material Disposal Sites Adjacent to the Monterey Bay National Marine Sanctuary

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Adjacent to the Monterey Bay National Marine Sanctuary D Appendix D to Subpart M of Part 922 Commerce and... SANCTUARY PROGRAM REGULATIONS Monterey Bay National Marine Sanctuary Pt. 922, Subpt. M, App. D Appendix D to Subpart M of Part 922—Dredged Material Disposal Sites Adjacent to the Monterey Bay National...

  5. 15 CFR Appendix D to Subpart M of... - Dredged Material Disposal Sites Adjacent to the Monterey Bay National Marine Sanctuary

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Adjacent to the Monterey Bay National Marine Sanctuary D Appendix D to Subpart M of Part 922 Commerce and... SANCTUARY PROGRAM REGULATIONS Monterey Bay National Marine Sanctuary Pt. 922, Subpt. M, App. D Appendix D to Subpart M of Part 922—Dredged Material Disposal Sites Adjacent to the Monterey Bay National...

  6. 15 CFR Appendix D to Subpart M of... - Dredged Material Disposal Sites Adjacent to the Monterey Bay National Marine Sanctuary

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Adjacent to the Monterey Bay National Marine Sanctuary D Appendix D to Subpart M of Part 922 Commerce and... SANCTUARY PROGRAM REGULATIONS Monterey Bay National Marine Sanctuary Pt. 922, Subpt. M, App. D Appendix D to Subpart M of Part 922—Dredged Material Disposal Sites Adjacent to the Monterey Bay National...

  7. Novel High Efficient Organic Photovoltaic Materials: Appendix for Summary of Research. Appendix

    NASA Technical Reports Server (NTRS)

    Sun, Sam

    2002-01-01

    There are many different kinds of conjugated polymers that may be useful in photovoltaic devices. So far, the most popular and successful conjugated polymers used in photovoltaic devices include poly(1,4-)phenylenevinylenes (PPV), C60 and their derivatives. The discovery of electro-luminescence in PPV has stimulated a great deal of interest in developing "plastic" solid-state semiconductor devices. The overall synthetic methodology for the preparation of PPV can be divided into three main categories: (1) side chain derivatization, (2) precursor approach, and (3) in-situ polymerization. In this project, the first method was adopted. As discussed in project proposal and literatures, the overall efficiency of photovoltaic devices containing conjugated polymers is determined by the materials ability to generate excitons from incoming radiation, and then to separate the charges at donor/acceptor interfaces, and then to transport charges to respective electrodes. Given that effective exciton diffusion range are typical less then 30 nm, unique morphological structures are needed. This need led to several research groups to the idea that interpenetrating or bi-continuous networks of donor (electron donating) and acceptor (electron withdrawing) polymers should give better results. One approach involved the use of functionalized PPV. The attachment of electron withdrawing cyano groups to a PPV forms the CN-PPV, making it a strong electron acceptor. Underivatized PPV is a generally considered a hole-transporting material. Using blends of MEH-PPV, a soluble donor PPV derivative, as a hole transporter and CN-PPV as an electron transporter, a quantum efficiencies of up to 6% was achieved.

  8. Analysis of 1973 Participation of Handicapped Children in Local Education Programs (Including appendixes).

    ERIC Educational Resources Information Center

    Ford, Nelson

    Analyzed is the impact of regional, racial or ethnic, and socioeconomic factors on handicapped students' participation during 1973 in special education programs in more than 37,000 schools within 2,500 local U.S. school districts. Included are data on American Indian, black, Spanish surnamed, Asian American, and nonminority pupils enrolled in…

  9. 14 CFR Appendix D to Part 43 - Scope and Detail of Items (as Applicable to the Particular Aircraft) To Be Included in Annual and...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the Particular Aircraft) To Be Included in Annual and 100-Hour Inspections D Appendix D to Part 43 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT MAINTENANCE... Items (as Applicable to the Particular Aircraft) To Be Included in Annual and 100-Hour Inspections...

  10. Spacecraft materials guide. [including: encapsulants and conformal coatings; optical materials; lubrication; and, bonding and joining processes

    NASA Technical Reports Server (NTRS)

    Staugaitis, C. L. (Editor)

    1975-01-01

    Materials which have demonstrated their suitability for space application are summarized. Common, recurring problems in encapsulants and conformal coatings, optical materials, lubrication, and bonding and joining are noted. The subjects discussed include: low density and syntactic foams, electrical encapsulants; optical glasses, interference filter, mirrors; oils, greases, lamillar lubricants; and, soldering and brazing processes.

  11. Appendix.

    ERIC Educational Resources Information Center

    NatureScope, 1989

    1989-01-01

    Includes a glossary, bibliography, reference books, children's books, cassettes, films, filmstrips, records, slides, videos, booklets, periodicals, posters, other activity sources, information sources, index, and areas of tropical rain forests. (Author/RT)

  12. 14 CFR Appendix D to Part 43 - Scope and Detail of Items (as Applicable to the Particular Aircraft) To Be Included in Annual and...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Scope and Detail of Items (as Applicable to the Particular Aircraft) To Be Included in Annual and 100-Hour Inspections D Appendix D to Part 43 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT MAINTENANCE, PREVENTIVE MAINTENANCE, REBUILDING,...

  13. 14 CFR Appendix D to Part 43 - Scope and Detail of Items (as Applicable to the Particular Aircraft) To Be Included in Annual and...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Scope and Detail of Items (as Applicable to the Particular Aircraft) To Be Included in Annual and 100-Hour Inspections D Appendix D to Part 43 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT MAINTENANCE, PREVENTIVE MAINTENANCE, REBUILDING,...

  14. 14 CFR Appendix D to Part 43 - Scope and Detail of Items (as Applicable to the Particular Aircraft) To Be Included in Annual and...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Scope and Detail of Items (as Applicable to the Particular Aircraft) To Be Included in Annual and 100-Hour Inspections D Appendix D to Part 43 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT MAINTENANCE, PREVENTIVE MAINTENANCE, REBUILDING,...

  15. 14 CFR Appendix D to Part 43 - Scope and Detail of Items (as Applicable to the Particular Aircraft) To Be Included in Annual and...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Scope and Detail of Items (as Applicable to the Particular Aircraft) To Be Included in Annual and 100-Hour Inspections D Appendix D to Part 43 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT MAINTENANCE, PREVENTIVE MAINTENANCE, REBUILDING,...

  16. RBDMS user`s guide which includes the RBDMS administrative guide, Version 4.0. Appendix A

    SciTech Connect

    1995-03-01

    RBDMS (Risk Based Data Management System) is an oil and gas electronic data management system which stems from the idea developed from four previous projects conducted by the American Petroleum Institute (API) and the Ground Water Protection Council (GWPC). The first study studied oil and gas industry injection well corrosion. It included a methodology for assessing the probability of contaminating underground sources of drinking water (USDWs) via Class 2 injection well operations. A feasibility study was conducted to investigate if an electronic data management system could incorporate the methodology. A second feasibility study was conducted to test the methodology on a much small basis. The RBDMS effort then continued through a grant from DOE with a multi-task project consisting of an inventory and needs assessment of 25 oil and gas producing states pertaining to oil and gas production/regulatory activities, state geological/hydrogeological considerations, Class 2 underground injection activities, electronic data management needs and functional requirements, environmental risk assessment and management objectives, resultant benefit of a RBDMS, and various information and data required for the design and development of a RBDMS in individual states. This appendix contains the documentation for the use of the RBDMS.

  17. Nonlinear reduced order homogenization of materials including cohesive interfaces

    NASA Astrophysics Data System (ADS)

    Fritzen, Felix; Leuschner, Matthias

    2015-07-01

    The mechanical response of composite materials is strongly influenced by the nonlinear behavior of the interface between the constituents. In order to make reliable yet computationally efficient predictions for such materials, a reduced order model is developed. Conceptual ideas of the NTFA (Michel and Suquet, Int J Solids Struct 40:6937-6955, 2003, Comput Methods Appl Mech Eng 193:5477-5502, 2004) and of the pRBMOR (Fritzen, Hodapp and Leuschner Comput Methods Appl Mech Eng 260:143-154, 2013, Fritzen et al., Comput Methods Appl Mech Eng 278:186-217, 2014) are adopted. The key idea is to parameterize the displacement jumps on the cohesive interfaces by a reduced basis of global ansatz functions. Micromechanical considerations and the potential structure of the constitutive models lead to a variational formulation and reduced equilibrium conditions. The effect of the preanalysis phase on the accuracy is investigated using geometrically optimal training directions. The reduced model is tested for three-dimensional microstructures. Besides the effective stress response, the tension-compression asymmetry and the distribution of the separation of the interface are investigated. Memory savings on the order of are realized. The computing time is reduced considerably.

  18. Hydrofluoride decomposition of natural materials including zirconium-containing minerals

    NASA Astrophysics Data System (ADS)

    Laptash, N.; Maslennikova, I.

    2016-01-01

    Recently, interest in ammonium hydrogen difluoride (NH4HF2) as a versatile fluorinating agent for the decomposition of natural materials resumed. It is considered to be a new and more efficient than hydrofluoric acid (HF) reagent in analytical chemistry. Thermodynamically possible fluorination reactions with NH4HF2 are exothermic and proceed even at room temperature with the entropy reserve. The fluorination products are of high symmetry phases (tetragonal or cubic) with partial substitution of fluoride ion for oxide (or hydroxide). The fluorination of refractory silicate zircon (ZrSiO4) is kinetically hindered, and its complete decomposition requires the use of a Teflon autoclave at 200oC. The fluorination products are cubic (NH4)3Zr(OH)xF7-x (x ≀ 0.3) and tetragonal double salt (NH4)3SiF7, which can be separated due to incongruent sublimation of (NH4)2SiF6. The mechanism of the latter process is proposed.

  19. Materials properties, loads, and stress analysis, Spartan REM: Appendix A

    NASA Technical Reports Server (NTRS)

    Marlowe, D. S.; West, E. J.

    1984-01-01

    The mechanical properties, load tests, and stress analysis of the Spartan Release Engagement Mechanism (REM) is presented. The fracture properties of the components of the unit are also discussed. Detailed engineering drawings are included.

  20. 30 CFR 254.24 - What information must I include in the “Equipment inventory” appendix?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.24 What... include: (a) An inventory of spill-response materials and supplies, services, equipment, and...

  1. 30 CFR 254.24 - What information must I include in the “Equipment inventory” appendix?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.24 What... include: (a) An inventory of spill-response materials and supplies, services, equipment, and...

  2. 30 CFR 254.24 - What information must I include in the “Equipment inventory” appendix?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.24 What... include: (a) An inventory of spill-response materials and supplies, services, equipment, and...

  3. 21 CFR Appendix A to Part 74 - The Procedure for Determining Ether Soluble Material in D&C Red Nos. 6 and 7

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Material in D&C Red Nos. 6 and 7 A Appendix A to Part 74 Food and Drugs FOOD AND DRUG ADMINISTRATION..., App. A Appendix A to Part 74—The Procedure for Determining Ether Soluble Material in D&C Red Nos. 6... similarly obtained for D&C Red No. 6 Lot AA5169. Apparatus (A) Spectrophotometer (Cary 118 or...

  4. 21 CFR Appendix A to Part 74 - The Procedure for Determining Ether Soluble Material in D&C Red Nos. 6 and 7

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Material in D&C Red Nos. 6 and 7 A Appendix A to Part 74 Food and Drugs FOOD AND DRUG ADMINISTRATION..., App. A Appendix A to Part 74—The Procedure for Determining Ether Soluble Material in D&C Red Nos. 6... similarly obtained for D&C Red No. 6 Lot AA5169. Apparatus (A) Spectrophotometer (Cary 118 or...

  5. 21 CFR Appendix A to Part 74 - The Procedure for Determining Ether Soluble Material in D&C Red Nos. 6 and 7

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Material in D&C Red Nos. 6 and 7 A Appendix A to Part 74 Food and Drugs FOOD AND DRUG ADMINISTRATION..., App. A Appendix A to Part 74—The Procedure for Determining Ether Soluble Material in D&C Red Nos. 6... similarly obtained for D&C Red No. 6 Lot AA5169. Apparatus (A) Spectrophotometer (Cary 118 or...

  6. 10 CFR Appendix E to Part 73 - Levels of Physical Protection To Be Applied in International Transport of Nuclear Material 1

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Levels of Physical Protection To Be Applied in International Transport of Nuclear Material 1 E Appendix E to Part 73 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Pt. 73, App. E Appendix E to Part 73—Levels...

  7. 10 CFR Appendix E to Part 73 - Levels of Physical Protection To Be Applied in International Transport of Nuclear Material 1

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Levels of Physical Protection To Be Applied in International Transport of Nuclear Material 1 E Appendix E to Part 73 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Pt. 73, App. E Appendix E to Part 73—Levels...

  8. 10 CFR Appendix F to Part 73 - Nations That Are Parties to the Convention on the Physical Protection of Nuclear Material 1

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Nations That Are Parties to the Convention on the Physical Protection of Nuclear Material 1 F Appendix F to Part 73 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Pt. 73, App. F Appendix F to Part 73—Nations That Are Parties to the Convention on the...

  9. Systems including catalysts in porous zeolite materials within a reactor for use in synthesizing hydrocarbons

    DOEpatents

    Rolllins, Harry W. (Idaho Falls, ID); Petkovic, Lucia M. (Idaho Falls, ID); Ginosar, Daniel M. (Idaho Falls, ID)

    2012-07-24

    Catalytic structures include a catalytic material disposed within a zeolite material. The catalytic material may be capable of catalyzing a formation of methanol from carbon monoxide and/or carbon dioxide, and the zeolite material may be capable of catalyzing a formation of hydrocarbon molecules from methanol. The catalytic material may include copper and zinc oxide. The zeolite material may include a first plurality of pores substantially defined by a crystal structure of the zeolite material and a second plurality of pores dispersed throughout the zeolite material. Systems for synthesizing hydrocarbon molecules also include catalytic structures. Methods for synthesizing hydrocarbon molecules include contacting hydrogen and at least one of carbon monoxide and carbon dioxide with such catalytic structures. Catalytic structures are fabricated by forming a zeolite material at least partially around a template structure, removing the template structure, and introducing a catalytic material into the zeolite material.

  10. 10 CFR Appendix A to Subpart A of... - Format for Presentation of Material in Environmental Impact Statements

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Format for Presentation of Material in Environmental Impact Statements A Appendix A to Subpart A of Part 51 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) ENVIRONMENTAL PROTECTION REGULATIONS FOR DOMESTIC LICENSING AND RELATED REGULATORY FUNCTIONS National Environmental Policy Act-Regulations...

  11. 40 CFR Appendix Xi to Part 266 - Lead-Bearing Materials That May be Processed in Exempt Lead Smelters

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Processed in Exempt Lead Smelters XI Appendix XI to Part 266 Protection of Environment ENVIRONMENTAL... 266—Lead-Bearing Materials That May be Processed in Exempt Lead Smelters A. Exempt Lead-Bearing...-associated industries are lead smelters, lead-acid battery manufacturing, and lead chemical manufacturing...

  12. 40 CFR Appendix Xi to Part 266 - Lead-Bearing Materials That May be Processed in Exempt Lead Smelters

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Processed in Exempt Lead Smelters XI Appendix XI to Part 266 Protection of Environment ENVIRONMENTAL... 266—Lead-Bearing Materials That May be Processed in Exempt Lead Smelters A. Exempt Lead-Bearing...-associated industries are lead smelters, lead-acid battery manufacturing, and lead chemical manufacturing...

  13. 40 CFR Appendix Xi to Part 266 - Lead-Bearing Materials That May be Processed in Exempt Lead Smelters

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Processed in Exempt Lead Smelters XI Appendix XI to Part 266 Protection of Environment ENVIRONMENTAL... 266—Lead-Bearing Materials That May be Processed in Exempt Lead Smelters A. Exempt Lead-Bearing...-associated industries are lead smelters, lead-acid battery manufacturing, and lead chemical manufacturing...

  14. 40 CFR Appendix Xi to Part 266 - Lead-Bearing Materials That May be Processed in Exempt Lead Smelters

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Processed in Exempt Lead Smelters XI Appendix XI to Part 266 Protection of Environment ENVIRONMENTAL... 266—Lead-Bearing Materials That May be Processed in Exempt Lead Smelters A. Exempt Lead-Bearing...-associated industries are lead smelters, lead-acid battery manufacturing, and lead chemical manufacturing...

  15. Composite materials and bodies including silicon carbide and titanium diboride and methods of forming same

    SciTech Connect

    Lillo, Thomas M.; Chu, Henry S.; Harrison, William M.; Bailey, Derek

    2013-01-22

    Methods of forming composite materials include coating particles of titanium dioxide with a substance including boron (e.g., boron carbide) and a substance including carbon, and reacting the titanium dioxide with the substance including boron and the substance including carbon to form titanium diboride. The methods may be used to form ceramic composite bodies and materials, such as, for example, a ceramic composite body or material including silicon carbide and titanium diboride. Such bodies and materials may be used as armor bodies and armor materials. Such methods may include forming a green body and sintering the green body to a desirable final density. Green bodies formed in accordance with such methods may include particles comprising titanium dioxide and a coating at least partially covering exterior surfaces thereof, the coating comprising a substance including boron (e.g., boron carbide) and a substance including carbon.

  16. Systems and strippable coatings for decontaminating structures that include porous material

    DOEpatents

    Fox, Robert V.; Avci, Recep; Groenewold, Gary S.

    2011-12-06

    Methods of removing contaminant matter from porous materials include applying a polymer material to a contaminated surface, irradiating the contaminated surface to cause redistribution of contaminant matter, and removing at least a portion of the polymer material from the surface. Systems for decontaminating a contaminated structure comprising porous material include a radiation device configured to emit electromagnetic radiation toward a surface of a structure, and at least one spray device configured to apply a capture material onto the surface of the structure. Polymer materials that can be used in such methods and systems include polyphosphazine-based polymer materials having polyphosphazine backbone segments and side chain groups that include selected functional groups. The selected functional groups may include iminos, oximes, carboxylates, sulfonates, .beta.-diketones, phosphine sulfides, phosphates, phosphites, phosphonates, phosphinates, phosphine oxides, monothio phosphinic acids, and dithio phosphinic acids.

  17. Environmental impact statement/state analysis report. Cedar Bay Cogeneration Project, Jacksonville, Florida (EPA and FDER). Including Technical Appendix. Draft report. [Independent Power Generation

    SciTech Connect

    Not Available

    1990-05-01

    AES/Cedar Bay, Inc. proposes to construct and operate a cogeneration facility on and existing industrial site within the North District of Duval County, approximately eight miles north of Jacksonville, Florida. The plant will produce 225 megawatts of electricity for sale to Florida Power and Light Company. In addition, steam will be sold to the adjacent Seminole Kraft Corporation paper mill. The document, prepared pursuant to the National Environmental Policy Act, assesses the proposed project and alternatives with respect to impacts on the natural and man-made environments. Potential mitigative measures are also evaluated. The Technical Appendix includes a copy of U.S. EPA's draft National Pollutant Discharge Elimination System permit, FDER's Conditions of Power Plant Siting Certification, as well as other state agency reports pertinent to the proposed project.

  18. 30 CFR 254.24 - What information must I include in the “Equipment inventory” appendix?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.24 What information...: (a) An inventory of spill-response materials and supplies, services, equipment, and response...

  19. 15 CFR Appendix 1 to Part 960 - Filing Instructions and Information To Be Included in the Licensing Application

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... spectral resolution; pointing parameters, etc.); (3) Anticipated best theoretical resolution (show... including: (1) A description of the plan for the sale and distribution of such data; (2) The method...

  20. Ecological evaluation of proposed discharge of dredged material from Oakland Harbor into ocean waters (Phase 3 of 38-Foot Project). Volume 2, Appendixes I through L

    SciTech Connect

    Ward, J.A.; Word, J.Q.; Pinza, M.R.; Mayhew, H.L.; Barrows, E.S.; Kohn, N.P.; Lefkovitz, L.F.

    1992-01-01

    At the request of the US Army Corps of Engineers (USACE), environmental studies were conducted by Battelle/Marine Science Laboratory (MSL) to evaluate the suitability of sediments from Oakland Inner Harbor for dredging and ocean disposal. During the Phase 3 38-Foot Project, sediment cores were collected from mudline to {minus}39 ft mean lower low water at various locations in Oakland Inner Harbor channel and allocated to six composite samples. These composites were evaluated through physical/chemical analyses, acute toxicity to sensitive marine organisms, and bioaccumulation potential. Sediment samples from individual locations were tested for physical/chemical parameters only. The results of toxicological and bioaccumulation testing may be used by USACE to determine the amount of potential dredged material from Oakland Inner Harbor channel acceptable for open-water disposal as defined by the Draft Implementation Manual (EPA/USACE 1990) and consistent with the Water Resources Development Act of 1986 (Public Law 99-662). This is Volume 2 of a two-volume data report that represents the data gathered during the Oakland Harbor Phase 3 38-Foot Project, conducted in the Fall of 1990. This data report does not include interpretation or statistical analysis of the 38-Foot data. Volume 1 includes the project background as well as data and results presented in Appendixes A through H. Volume 2 includes the remaining data presented in Appendixes I through L.

  1. High liquid yield process for retorting various organic materials including oil shale

    DOEpatents

    Coburn, Thomas T.

    1990-01-01

    This invention is a continuous retorting process for various high molecular weight organic materials, including oil shale, that yields an enhanced output of liquid product. The organic material, mineral matter, and an acidic catalyst, that appreciably adsorbs alkenes on surface sites at prescribed temperatures, are mixed and introduced into a pyrolyzer. A circulating stream of olefin enriched pyrolysis gas is continuously swept through the organic material and catalyst, whereupon, as the result of pyrolysis, the enhanced liquid product output is provided. Mixed spent organic material, mineral matter, and cool catalyst are continuously withdrawn from the pyrolyzer. Combustion of the spent organic material and mineral matter serves to reheat the catalyst. Olefin depleted pyrolysis gas, from the pyrolyzer, is enriched in olefins and recycled into the pyrolyzer. The reheated acidic catalyst is separated from the mineral matter and again mixed with fresh organic material, to maintain the continuously cyclic process.

  2. A high liquid yield process for retorting various organic materials including oil shale

    DOEpatents

    Coburn, T.T.

    1988-07-26

    This invention is a continuous retorting process for various high molecular weight organic materials, including oil shale, that yields an enhanced output of liquid product. The organic material, mineral matter, and an acidic catalyst, that appreciably adsorbs alkenes on surface sites at prescribed temperatures, are mixed and introduced into a pyrolyzer. A circulating stream of olefin enriched pyrolysis gas is continuously swept through the organic material and catalyst, whereupon, as the result of pyrolysis, the enhanced liquid product output is provided. Mixed spent organic material, mineral matter, and cool catalyst are continuously withdrawn from the pyrolyzer. Combustion of the spent organic material and mineral matter serves to reheat the catalyst. Olefin depleted pyrolysis gas, from the pyrolyzer, is enriched in olefins and recycled into the pyrolyzer. The reheated acidic catalyst is separated from the mineral matter and again mixed with fresh organic material, to maintain the continuously cyclic process. 2 figs.

  3. 32 CFR Appendix B to Part 80 - Procedures for Special Educational Programs (Including Related Services) for Preschool Children...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... transfers from a school operated by the DoD in accordance with 32 CFR part 1 or from a Section 6 School... screening, through the review of incoming records and the use of basic skills tests in reading, language... academic functioning, to include general intelligence. b. Visual and auditory acuity. c. Social...

  4. 30 CFR 254.29 - What information must I include in the “Training and drills” appendix?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.29 What...) Identify and include the dates of the training provided to members of the spill-response management...

  5. 30 CFR 254.29 - What information must I include in the “Training and drills” appendix?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.29 What...) Identify and include the dates of the training provided to members of the spill-response management...

  6. 30 CFR 254.28 - What information must I include in the “In situ burning plan” appendix?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.28 What..., including provisions for ignition of an oil spill; (c) A discussion of environmental effects of an in...

  7. 30 CFR 254.29 - What information must I include in the “Training and drills” appendix?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.29 What information...) Identify and include the dates of the training provided to members of the spill-response management...

  8. 30 CFR 254.28 - What information must I include in the “In situ burning plan” appendix?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.28 What..., including provisions for ignition of an oil spill; (c) A discussion of environmental effects of an in...

  9. 30 CFR 254.29 - What information must I include in the “Training and drills” appendix?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.29 What...) Identify and include the dates of the training provided to members of the spill-response management...

  10. 30 CFR 254.28 - What information must I include in the “In situ burning plan” appendix?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE Oil-Spill Response Plans for Outer Continental Shelf Facilities § 254.28 What..., including provisions for ignition of an oil spill; (c) A discussion of environmental effects of an in...

  11. Method and system including a double rotary kiln pyrolysis or gasification of waste material

    SciTech Connect

    McIntosh, Michael J.; Arzoumanidis, Gregory G.

    1997-01-01

    A method of destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500.degree. C. to heat the particulate material to a temperature in the range of from about 200.degree. C. to about 900.degree. C. in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet.

  12. A method and system including a double rotary kiln pyrolysis or gasification of waste material

    SciTech Connect

    McIntosh, M.J.; Arzoumanidis, G.G.

    1995-12-31

    A method is described for destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500 C to heat the particulate material to a temperature in the range of from about 200 C to about 900 C in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet.

  13. Method and system including a double rotary kiln pyrolysis or gasification of waste material

    SciTech Connect

    McIntosh, M.J.; Arzoumanidis, G.G.

    1997-09-02

    A method is described for destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500 C to heat the particulate material to a temperature in the range of from about 200 C to about 900 C in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet. 5 figs.

  14. Ecological evaluation of proposed discharge of dredged material from Oakland Harbor into ocean waters (Phase 3 of 38-Foot Project). Volume 1, Background and appendixes A through H

    SciTech Connect

    Ward, J.A.; Word, J.Q.; Pinza, M.R.; Mayhew, H.L.; Barrows, E.S.; Kohn, N.P.; Lefkovitz, L.F.

    1992-01-01

    At the request of the US Army Corps of Engineering (USACE), environmental studies were conducted by Battelle/Marine Sciences Laboratory (MSL) to evaluate the suitability of sediments from Oakland Inner Harbor for dredging and ocean disposal. During the Phase 3 38-Foot Project, sediment cores were collected from mudline to {minus}39 ft mean lower low water at various locations in Oakland Inner Harbor channel and allocated to six composite samples. These composites were evaluated through physical/chemical analyses, acute toxicity to sensitive marine organisms, and bioaccumulation potential. Sediment samples from individual locations were tested for physical/chemical parameters only. The results of toxicological and bioaccumulation testing may be used by USACE to determine the amount of potential dredged material from Oakland Inner Harbor channel acceptable for open-water disposal as defined by the Draft Implementation Manual (EPA/USACE 1990) and consistent with the Water Resources Development Act of 1986 (Public Law 99-662). This is Volume 1 of a two-volume data report that presents the data gathered during the Oakland Harbor Phase 3 38-Foot Project, conducted in the Fall of 1990. This data report does not include interpretation or statistical analysis of the 38-Foot data. Volume 1 includes the project background as well as a full presentation of data and results in Appendixes A through H. Volume 2 contains the remaining data in Appendixes I through L.

  15. 2 CFR 200.453 - Materials and supplies costs, including costs of computing devices.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... costs of computing devices. 200.453 Section 200.453 Grants and Agreements Office of Management and... Provisions for Selected Items of Cost § 200.453 Materials and supplies costs, including costs of computing... performance of a Federal award may be charged as direct costs. In the specific case of computing...

  16. Eco: An Island Simulation Game. [Includes Packet of Population Education Materials].

    ERIC Educational Resources Information Center

    Yoder, Anita; Landahl, John

    These materials, developed for upper elementary and junior high school students, focus on a selected core of population learning objectives. Included are 24 self-contained student activities designed to be integrated into the existing curriculum. The activities relate to population concepts that can be investigated through mathematics, science,


  17. 48 CFR Appendix F to Chapter 2 - Material Inspection and Receiving Report

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    .... 1303 and 48 CFR chapter 1. Part 1—Introduction F-101General. (a) This appendix contains procedures and... QUICKTRANS. V SEAVAN. W Water, river, lake, coastal (commercial). X Bearer, walk-thru (customer pickup of... transfers; deliveries between air, water, or motor terminals; and adjacent activities). Local delivery...

  18. 48 CFR Appendix F to Chapter 2 - Material Inspection and Receiving Report

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    .... 1303 and 48 CFR chapter 1. Part 1—Introduction F-101General. (a) This appendix contains procedures and... QUICKTRANS. V SEAVAN. W Water, river, lake, coastal (commercial). X Bearer, walk-thru (customer pickup of... transfers; deliveries between air, water, or motor terminals; and adjacent activities). Local delivery...

  19. 48 CFR Appendix F to Chapter 2 - Material Inspection and Receiving Report

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    .... 1303 and 48 CFR chapter 1. Part 1—Introduction F-101General. (a) This appendix contains procedures and... acceptance; and (2) Sign and date. WAWF will enter the typed, stamped, or printed name, title, email address... appropriate box(es); and (B) Sign and date. WAWF will enter the typed, stamped, or printed name, title,...

  20. 48 CFR Appendix F to Chapter 2 - Material Inspection and Receiving Report

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    .... Authority: 41 U.S.C. 421 and 48 CFR chapter 1. Part 1—Introduction F-101General. This appendix contains... gliders, 1550 target drones HQ Air Force Materiel Command, LGX-AVDO, Area A, Building 262, Room N142,...

  1. Study concerning the utilization of the ocean spreading center environment for the conversion of biomass to a liquid fuel. (Includes Appendix A: hydrothermal petroleum genesis). [Supercritical water

    SciTech Connect

    Steverson, M.; Stormberg, G.

    1985-01-01

    This document contains a report on the feasibility of utilizing energy obtained from ocean spreading centers as process heat for the conversion of municipal solid wastes to liquid fuels. The appendix contains a paper describing hydrothermal petroleum genesis. Both have been indexed separately for inclusion in the Energy Data Base. (DMC)

  2. 32 CFR Appendix D to Part 37 - What Common National Policy Requirements May Apply and Need To Be Included in TIAs?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... water. 4. If the project may impact a historic property, it is subject to the National Historic.... under the heading “Nondiscrimination” in Appendix B to 32 CFR part 22. 2. If the research involves human... rule about lobbying prohibitions, which is implemented by the DoD at 32 CFR part 28. The...

  3. 32 CFR Appendix D to Part 37 - What Common National Policy Requirements May Apply and Need To Be Included in TIAs?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... water. 4. If the project may impact a historic property, it is subject to the National Historic.... under the heading “Nondiscrimination” in Appendix B to 32 CFR part 22. 2. If the research involves human... rule about lobbying prohibitions, which is implemented by the DoD at 32 CFR part 28. The...

  4. 32 CFR Appendix E to Part 37 - What Provisions May a Participant Need To Include When Purchasing Goods or Services Under a TIA?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... of Defense OFFICE OF THE SECRETARY OF DEFENSE DoD GRANT AND AGREEMENT REGULATIONS TECHNOLOGY..., which are for substantive research program performance. B. Appendix A to 32 CFR part 34 lists seven... funds that takes place in connection with obtaining any Federal award. For further details, see 32...

  5. 32 CFR Appendix E to Part 37 - What Provisions May a Participant Need To Include When Purchasing Goods or Services Under a TIA?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... of Defense OFFICE OF THE SECRETARY OF DEFENSE DoD GRANT AND AGREEMENT REGULATIONS TECHNOLOGY..., which are for substantive research program performance. B. Appendix A to 32 CFR part 34 lists seven... funds that takes place in connection with obtaining any Federal award. For further details, see 32...

  6. 32 CFR Appendix E to Part 37 - What Provisions May a Participant Need To Include When Purchasing Goods or Services Under a TIA?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... of Defense OFFICE OF THE SECRETARY OF DEFENSE DoD GRANT AND AGREEMENT REGULATIONS TECHNOLOGY..., which are for substantive research program performance. B. Appendix A to 32 CFR part 34 lists seven... funds that takes place in connection with obtaining any Federal award. For further details, see 32...

  7. 32 CFR Appendix E to Part 37 - What Provisions May a Participant Need To Include When Purchasing Goods or Services Under a TIA?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... adoption at 2 CFR part 1125 of the OMB guidance implementing E.O.s 12549 (3 CFR, 1986 Comp., p. 189) and..., which are for substantive research program performance. B. Appendix A to 32 CFR part 34 lists seven... funds that takes place in connection with obtaining any Federal award. For further details, see 32...

  8. 32 CFR Appendix E to Part 37 - What Provisions May a Participant Need To Include When Purchasing Goods or Services Under a TIA?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... adoption at 2 CFR part 1125 of the OMB guidance implementing E.O.s 12549 (3 CFR, 1986 Comp., p. 189) and..., which are for substantive research program performance. B. Appendix A to 32 CFR part 34 lists seven... funds that takes place in connection with obtaining any Federal award. For further details, see 32...

  9. 40 CFR 1502.18 - Appendix.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Appendix. 1502.18 Section 1502.18 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.18 Appendix. If an agency prepares an appendix to an environmental impact statement the appendix shall: (a) Consist of material prepared in connection...

  10. Some Recent Advances of Ultrasonic Diagnostic Methods Applied to Materials and Structures (Including Biological Ones)

    NASA Astrophysics Data System (ADS)

    Nobile, Lucio; Nobile, Stefano

    This paper gives an overview of some recent advances of ultrasonic methods applied to materials and structures (including biological ones), exploring typical applications of these emerging inspection technologies to civil engineering and medicine. In confirmation of this trend, some results of an experimental research carried out involving both destructive and non-destructive testing methods for the evaluation of structural performance of existing reinforced concrete (RC) structures are discussed in terms of reliability. As a result, Ultrasonic testing can usefully supplement coring thus permitting less expensive and more representative evaluation of the concrete strength throughout the whole structure under examination.

  11. Vibration and damping of laminated, composite-material plates including thickness-shear effects

    NASA Technical Reports Server (NTRS)

    Bert, C. W.; Siu, C. C.

    1972-01-01

    An analytical investigation of sinusoidally forced vibration of laminated, anisotropic plates including bending-stretching coupling, thickness-shear flexibility, all three types of inertia effects, and material damping is presented. In the analysis the effects of thickness-shear deformation are considered by the use of a shear correction factor K, analogous to that used by Mindlin for homogeneous plates. Two entirely different approaches for calculating the thickness-shear factor for a laminate are presented. Numerical examples indicate that the value of K depends on the layer properties and the stacking sequence of the laminate.

  12. Multi-objective shape and material optimization of composite structures including damping

    NASA Technical Reports Server (NTRS)

    Saravanos, D. A.; Chamis, C. C.

    1990-01-01

    A multi-objective optimal design methodology is developed for light-weight, low-cost composite structures of improved dynamic performance. The design objectives include minimization of resonance amplitudes (or maximization of modal damping), weight, and material cost. The design vector includes micromechanics, laminate, and structural shape parameters. Performance constraints are imposed on static displacements, dynamic amplitudes, and natural frequencies. The effects of damping on the dynamics of composite structures are incorporated. Preliminary applications on a cantilever composite beam illustrated that only the proposed multi-objective optimization, as opposed to single objective functions, simultaneously improved all objectives. The significance of composite damping in the design of advanced composite structures was also demonstrated, indicating that design methods based on undamped dynamics may fail to improve the dynamic performance near resonances.

  13. Multi-objective shape and material optimization of composite structures including damping

    NASA Technical Reports Server (NTRS)

    Saravanos, D. A.; Chamis, Christos C.

    1990-01-01

    A multi-objective optimal design methodology is developed for light-weight, low cost composite structures of improved dynamic performance. The design objectives include minimization of resonance amplitudes (or maximization of modal damping), weight, and material cost. The design vector includes micromechanics, laminate, and structural shape parameters. Performance constraints are imposed on static displacements, dynamic amplitudes, and natural frequencies. The effects of damping on the dynamics of composite structures are incorporated. Preliminary applications on a cantilever composite beam illustrated that only the proposed multi-objective optimization, as opposed to single objective functions, simultaneously improved all objectives. The significance of composite damping in the design of advanced composite structures was also demonstrated, indicating the design methods based on undamped dynamics may fail to improve the dynamic performance near resonances.

  14. 10 CFR Appendix E to Part 73 - Levels of Physical Protection To Be Applied in International Transport of Nuclear Material 1

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Levels of Physical Protection To Be Applied in International Transport of Nuclear Material 1 E Appendix E to Part 73 Energy NUCLEAR REGULATORY COMMISSION...; (3) For natural uranium other than in the form of ore or ore residue, transportation protection...

  15. 10 CFR Appendix E to Part 73 - Levels of Physical Protection To Be Applied in International Transport of Nuclear Material 1

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Levels of Physical Protection To Be Applied in International Transport of Nuclear Material 1 E Appendix E to Part 73 Energy NUCLEAR REGULATORY COMMISSION...; (3) For natural uranium other than in the form of ore or ore residue, transportation protection...

  16. 10 CFR Appendix E to Part 73 - Levels of Physical Protection To Be Applied in International Transport of Nuclear Material 1

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Levels of Physical Protection To Be Applied in International Transport of Nuclear Material 1 E Appendix E to Part 73 Energy NUCLEAR REGULATORY COMMISSION...; (3) For natural uranium other than in the form of ore or ore residue, transportation protection...

  17. The Content Area Reading Project: An Inservice Education Program for Junior High School Teachers and Teachers of Adults. Appendix C, Model Teaching Materials. Final Report.

    ERIC Educational Resources Information Center

    Dupuis, Mary M.; Askov, Eunice N.

    Materials developed by teacher participants in the Content Area Reading Project are presented in this appendix to the Project report. The first section provides group informal reading inventories developed for use in adult education, teaching English as a second language, and nine content areas; it then presents cloze tests developed for use in


  18. 40 CFR Appendix Xii to Part 266 - Nickel or Chromium-Bearing Materials that may be Processed in Exempt Nickel-Chromium Recovery...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Nickel or Chromium-Bearing Materials that may be Processed in Exempt Nickel-Chromium Recovery Furnaces XII Appendix XII to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS WASTES...

  19. 49 CFR Appendix D to Part 172 - Rail Risk Analysis Factors

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Rail Risk Analysis Factors D Appendix D to Part... REQUIREMENTS, AND SECURITY PLANS Pt. 172, App. D Appendix D to Part 172—Rail Risk Analysis Factors A. This...) and (d), a route may include the point where the carrier takes possession of the material and...

  20. 12 CFR Appendix A to Part 1026 - Effect on State Laws

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... and Information (12 CFR Part 1070), all requests made, including any documents and other material... 12 Banks and Banking 9 2014-01-01 2014-01-01 false Effect on State Laws A Appendix A to Part 1026.... A Appendix A to Part 1026—Effect on State Laws Request for Determination A request for...

  1. Reliability Analysis of Brittle Material Structures - Including MEMS(?) - With the CARES/Life Program

    NASA Technical Reports Server (NTRS)

    Nemeth, Noel N.

    2002-01-01

    Brittle materials are being used, or considered, for a wide variety of high tech applications that operate in harsh environments, including static and rotating turbine parts. thermal protection systems, dental prosthetics, fuel cells, oxygen transport membranes, radomes, and MEMS. Designing components to sustain repeated load without fracturing while using the minimum amount of material requires the use of a probabilistic design methodology. The CARES/Life code provides a general-purpose analysis tool that predicts the probability of failure of a ceramic component as a function of its time in service. For this presentation an interview of the CARES/Life program will be provided. Emphasis will be placed on describing the latest enhancements to the code for reliability analysis with time varying loads and temperatures (fully transient reliability analysis). Also, early efforts in investigating the validity of using Weibull statistics, the basis of the CARES/Life program, to characterize the strength of MEMS structures will be described as as well as the version of CARES/Life for MEMS (CARES/MEMS) being prepared which incorporates single crystal and edge flaw reliability analysis capability. It is hoped this talk will open a dialog for potential collaboration in the area of MEMS testing and life prediction.

  2. Open literature review of threats including sabotage and theft of fissile material transport in Japan.

    SciTech Connect

    Cochran, John Russell; Furaus, James Phillip; Marincel, Michelle K.

    2005-06-01

    This report is a review of open literature concerning threats including sabotage and theft related to fissile material transport in Japan. It is intended to aid Japanese officials in the development of a design basis threat. This threat includes the external threats of the terrorist, criminal, and extremist, and the insider threats of the disgruntled employee, the employee forced into cooperation via coercion, the psychotic employee, and the criminal employee. Examination of the external terrorist threat considers Japanese demographics, known terrorist groups in Japan, and the international relations of Japan. Demographically, Japan has a relatively homogenous population, both ethnically and religiously. Japan is a relatively peaceful nation, but its history illustrates that it is not immune to terrorism. It has a history of domestic terrorism and the open literature points to the Red Army, Aum Shinrikyo, Chukaku-Ha, and Seikijuku. Japan supports the United States in its war on terrorism and in Iraq, which may make Japan a target for both international and domestic terrorists. Crime appears to remain low in Japan; however sources note that the foreign crime rate is increasing as the number of foreign nationals in the country increases. Antinuclear groups' recent foci have been nuclear reprocessing technology, transportation of MOX fuel, and possible related nuclear proliferation issues. The insider threat is first defined by the threat of the disgruntled employee. This threat can be determined by studying the history of Japan's employment system, where Keiretsu have provided company stability and lifetime employment. Recent economic difficulties and an increase of corporate crime, due to sole reliability on the honor code, have begun to erode employee loyalty.

  3. Interim report on the genetic and animal toxicity testing of SRC-I products, intermediates, and waste materials. Appendix D. Acute animal studies reports

    SciTech Connect

    Drozdowicz, B.Z.; Kelly, C.M.

    1983-09-01

    Appendix D is a collection of 25 individual reports on the toxicity of SRC-I products, intermediates and residues to rabbits, rats and guinea pigs with acute oral, dermal and inhalation exposure. It includes also eye and dermal irritation tests in rabbits and guinea pigs and dermal sensitization studies in albino guinea pigs. (LTN)

  4. Ecological evaluation of proposed discharge of dredged material from Oakland Harbor into ocean waters (Phase 3 B of -42-foot project). Volume 2, Appendixes

    SciTech Connect

    Kohn, N.P.; Ward, J.A.; Mayhew, H.L.; Word, J.Q.; Barrows, E.S.; Goodwin, S.M.; Lefkovitz, L.F.

    1992-06-01

    The Water Resources Development Act of 1986 (Public Law 99-662) authorized the US Army Corps of Engineers (USACE) San Francisco District, to deepen and widen the navigational channels of the Oakland Inner and Outer Harbors to accommodate deeper-draft vessels. The USACE is considering several disposal options for the dredged material removed during these channel improvements including open-water disposal. Dredged material proposed for open-water disposal must be evaluated to determine the potential impacts of the disposal activity on the water column and disposal site environments. The USACE requested that Battelle/Marine Sciences Laboratory (MSL) conduct studies to evaluate open-water disposal options for Oakland Harbor sediments. This request developed into the Oakland Harbor Phase III Program. This is Volume 2 of a two-volume report that presents information gathered to determine the suitability of ocean disposal of sediments dredged from Oakland Harbor. This volume contains the Appendixes (A through N), which provide details of the data analyses and full presentation of the data and results.

  5. Thermoelectric material including a multiple transition metal-doped type I clathrate crystal structure

    DOEpatents

    Yang, Jihui; Shi, Xun; Bai, Shengqiang; Zhang, Wenqing; Chen, Lidong; Yang, Jiong

    2012-01-17

    A thermoelectric material includes a multiple transition metal-doped type I clathrate crystal structure having the formula A.sub.8TM.sub.y.sub.1.sup.1TM.sub.y.sub.2.sup.2 . . . TM.sub.y.sub.n.sup.nM.sub.zX.sub.46-y.sub.1.sub.-y.sub.2.sub.- . . . -y.sub.n.sub.-z. In the formula, A is selected from the group consisting of barium, strontium, and europium; X is selected from the group consisting of silicon, germanium, and tin; M is selected from the group consisting of aluminum, gallium, and indium; TM.sup.1, TM.sup.2, and TM.sup.n are independently selected from the group consisting of 3d, 4d, and 5d transition metals; and y.sub.1, y.sub.2, y.sub.n and Z are actual compositions of TM.sup.1, TM.sup.2, TM.sup.n, and M, respectively. The actual compositions are based upon nominal compositions derived from the following equation: z=8q.sub.A-|.DELTA.q.sub.1|y.sub.1-|.DELTA.q.sub.2|y.sub.2- . . . -|.DELTA.q.sub.n|y.sub.n, wherein q.sub.A is a charge state of A, and wherein .DELTA.q.sub.1, .DELTA.q.sub.2, .DELTA.q.sub.n are, respectively, the nominal charge state of the first, second, and n-th TM.

  6. 40 CFR 60.1065 - What must I include in my draft materials separation plan?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) You must prepare and submit a draft materials separation plan for your municipal waste combustion unit... materials separation plan? 60.1065 Section 60.1065 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Performance for Small Municipal Waste Combustion Units for Which Construction is Commenced After August...

  7. 40 CFR 60.1065 - What must I include in my draft materials separation plan?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) You must prepare and submit a draft materials separation plan for your municipal waste combustion unit... materials separation plan? 60.1065 Section 60.1065 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Performance for Small Municipal Waste Combustion Units for Which Construction is Commenced After August...

  8. Materials Reliability Program: Risk-Informed Revision of ASME Section XI Appendix G - Proof of Concept (MRP-143)

    SciTech Connect

    B. Bishop; et al

    2005-03-30

    This study indicates that risk-informed methods can be used to significantly relax the current ASME and NRC Appendix G requirements while still maintaining satisfactory levels of reactor vessel structural integrity. This relaxation in Appendix G requirements directly translates into significant improvements in operational flexibility.

  9. 49 CFR Appendix A to Part 172 - Office of Hazardous Materials Transportation Color Tolerance Charts and Tables

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Tolerance Charts and Tables A Appendix A to Part 172 Transportation Other Regulations Relating to..., EMERGENCY RESPONSE INFORMATION, TRAINING REQUIREMENTS, AND SECURITY PLANS Pt. 172, App. A Appendix A to Part... colors of labels printed directly on package surfaces are outside the table 1 or 2 tolerances,...

  10. Modeling ozone removal to indoor materials, including the effects of porosity, pore diameter, and thickness.

    PubMed

    Gall, Elliott T; Siegel, Jeffrey A; Corsi, Richard L

    2015-04-01

    We develop an ozone transport and reaction model to determine reaction probabilities and assess the importance of physical properties such as porosity, pore diameter, and material thickness on reactive uptake of ozone to five materials. The one-dimensional model accounts for molecular diffusion from bulk air to the air-material interface, reaction at the interface, and diffusive transport and reaction through material pore volumes. Material-ozone reaction probabilities that account for internal transport and internal pore area, ?(ipa), are determined by a minimization of residuals between predicted and experimentally derived ozone concentrations. Values of ?(ipa) are generally less than effective reaction probabilities (?(eff)) determined previously, likely because of the inclusion of diffusion into substrates and reaction with internal surface area (rather than the use of the horizontally projected external material areas). Estimates of ?(ipa) average 1 Ś 10(-7), 2 Ś 10(-7), 4 Ś 10(-5), 2 Ś 10(-5), and 4 Ś 10(-7) for two types of cellulose paper, pervious pavement, Portland cement concrete, and an activated carbon cloth, respectively. The transport and reaction model developed here accounts for observed differences in ozone removal to varying thicknesses of the cellulose paper, and estimates a near constant ?(ipa) as material thickness increases from 0.02 to 0.16 cm. PMID:25748309

  11. The research of ceramic materials for applications in the glass industry including microwave heating techniques

    NASA Astrophysics Data System (ADS)

    Kogut, K.; Kasprzyk, K.; Zboromirska-Wnukiewicz, B.; Ruziewicz, T.

    2016-02-01

    The melting of a glass is a very energy-intensive process. Selection of energy sources, the heating technique and the method of heating recovery are a fundamental issue from the furnace design point of view of and economic effectiveness of the process. In these processes the problem constitutes the lack of the appropriate ceramic materials that would meet the requirements. In this work the standard ceramic materials were examined and verified. The possibilities of application of microwave techniques were evaluated. In addition the requirements regarding the parameters of new ceramic materials applied for microwave technologies were determined.

  12. A finite element model for wave propagation in an inhomogeneous material including experimental validation

    NASA Technical Reports Server (NTRS)

    Baumeister, Kenneth J.; Dahl, Milo D.

    1987-01-01

    A finite element model was developed to solve for the acoustic pressure field in a nonhomogeneous region. The derivations from the governing equations assumed that the material properties could vary with position resulting in a nonhomogeneous variable property two-dimensional wave equation. This eliminated the necessity of finding the boundary conditions between the different materials. For a two media region consisting of part air (in the duct) and part bulk absorber (in the wall), a model was used to describe the bulk absorber properties in two directions. An experiment to verify the numerical theory was conducted in a rectangular duct with no flow and absorbing material mounted on one wall. Changes in the sound field, consisting of planar waves was measured on the wall opposite the absorbing material. As a function of distance along the duct, fairly good agreement was found in the standing wave pattern upstream of the absorber and in the decay of pressure level opposite the absorber.

  13. A finite element model for wave propagation in an inhomogeneous material including experimental validation

    NASA Technical Reports Server (NTRS)

    Baumeister, Kenneth J.; Dahl, Milo D.

    1987-01-01

    A finite element model was developed to solve for the acoustic pressure field in a nonhomogeneous region. The derivations from the governing equations assumed that the material properties could vary with position resulting in a nonhomogeneous variable property two-dimensional wave equation. This eliminated the necessity of finding the boundary conditions between the different materials. For a two media region consisting of part air (in the duct) and part bulk absorber (in the wall), a model was used to describe the bulk absorber properties in two directions. An experiment to verify the numerical theory was conducted in a rectangular duct with no flow and absorbing material mounted on one wall. Changes in the sound field, consisting of planar waves, was measured on the wall opposite the absorbing material. As a function of distance along the duct, fairly good agreement was found in the standing wave pattern upstream of the absorber and in the decay of pressure level opposite the absorber.

  14. Fabrication method for cores of structural sandwich materials including star shaped core cells

    DOEpatents

    Christensen, Richard M.

    1997-01-01

    A method for fabricating structural sandwich materials having a core pattern which utilizes star and non-star shaped cells. The sheets of material are bonded together or a single folded sheet is used, and bonded or welded at specific locations, into a flat configuration, and are then mechanically pulled or expanded normal to the plane of the sheets which expand to form the cells. This method can be utilized to fabricate other geometric cell arrangements than the star/non-star shaped cells. Four sheets of material (either a pair of bonded sheets or a single folded sheet) are bonded so as to define an area therebetween, which forms the star shaped cell when expanded.

  15. Fabrication method for cores of structural sandwich materials including star shaped core cells

    DOEpatents

    Christensen, R.M.

    1997-07-15

    A method for fabricating structural sandwich materials having a core pattern which utilizes star and non-star shaped cells is disclosed. The sheets of material are bonded together or a single folded sheet is used, and bonded or welded at specific locations, into a flat configuration, and are then mechanically pulled or expanded normal to the plane of the sheets which expand to form the cells. This method can be utilized to fabricate other geometric cell arrangements than the star/non-star shaped cells. Four sheets of material (either a pair of bonded sheets or a single folded sheet) are bonded so as to define an area therebetween, which forms the star shaped cell when expanded. 3 figs.

  16. Method of extruding and packaging a thin sample of reactive material including forming the extrusion die

    DOEpatents

    Lewandowski, Edward F. (Westmont, IL); Peterson, Leroy L. (Joliet, IL)

    1985-01-01

    This invention teaches a method of cutting a narrow slot in an extrusion die with an electrical discharge machine by first drilling spaced holes at the ends of where the slot will be, whereby the oil can flow through the holes and slot to flush the material eroded away as the slot is being cut. The invention further teaches a method of extruding a very thin ribbon of solid highly reactive material such as lithium or sodium through the die in an inert atmosphere of nitrogen, argon or the like as in a glovebox. The invention further teaches a method of stamping out sample discs from the ribbon and of packaging each disc by sandwiching it between two aluminum sheets and cold welding the sheets together along an annular seam beyond the outer periphery of the disc. This provides a sample of high purity reactive material that can have a long shelf life.

  17. Method of extruding and packaging a thin sample of reactive material, including forming the extrusion die

    DOEpatents

    Lewandowski, E.F.; Peterson, L.L.

    1981-11-30

    This invention teaches a method of cutting a narrow slot in an extrusion die with an electrical discharge machine by first drilling spaced holes at the ends of where the slot will be, whereby the oil can flow through the holes and slot to flush the material eroded away as the slot is being cut. The invention further teaches a method of extruding a very thin ribbon of solid highly reactive material such as lithium or sodium through the die in an inert atmosphere of nitrogen, argon, or the like as in a glovebox. The invention further teaches a method of stamping out sample discs from the ribbon and of packaging each disc by sandwiching it between two aluminum sheets and cold welding the sheets together along an annular seam beyond the outer periphery of the disc. This provides a sample of high purity reactive material that can have a long shelf life.

  18. Homestay Program Orientation Manual, Including Leader's Guides and Preparatory Readings, Plus Materials for Student Use.

    ERIC Educational Resources Information Center

    Grove, Cornelius Lee; Hansel, Bettina

    Developed as orientation materials for foreign students coming to the United States to study English, this manual contains six units to acquaint students with U.S. history, government, and culture. The first unit introduces students to the daily routines and interpersonal relationships of U.S. people. Unit 2 examines the origins and significance


  19. DIRECT PRODUCTION OF BIODIESEL FROM LIPID-BEARING MATERIALS, INCLUDING CANOLA

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In contemporary biodiesel production, it is typical to employ a feedstock that is an isolated lipid, such as vegetable oil, animal fat, or waste grease. This necessitates the prior isolation of the lipids from raw material feedstocks, which adds cost and processing technology to biodiesel productio...

  20. The Filtering Function of a Completely Open Resonance Cavity Including Left-Handed Materials

    NASA Astrophysics Data System (ADS)

    Yu, Guanxia

    2010-12-01

    A numerical simulation is performed to study a completely open cavity based on left-handed materials. This cavity can restrict electromagnetic waves with no surrounding reflective wall. A closed path with zero optical paths is formed. Due to the effect of resonance, this cavity can be used as a filter.

  1. Phonon transport control by nanoarchitecture including epitaxial Ge nanodots for Si-based thermoelectric materials

    PubMed Central

    Yamasaka, Shuto; Nakamura, Yoshiaki; Ueda, Tomohiro; Takeuchi, Shotaro; Sakai, Akira

    2015-01-01

    Phonon transport in Si films was controlled using epitaxially-grown ultrasmall Ge nanodots (NDs) with ultrahigh density for the purpose of developing Si-based thermoelectric materials. The Si/Ge ND stacked structures, which were formed by the ultrathin SiO2 film technique, exhibited lower thermal conductivities than those of the conventional nanostructured SiGe bulk alloys, despite the stacked structures having a smaller Ge fraction. This came from the large thermal resistance caused by phonon scattering at the Si/Ge ND interfaces. The phonon scattering can be controlled by the Ge ND structure, which was independent of Si layer structure for carrier transport. These results demonstrate the effectiveness of ultrasmall epitaxial Ge NDs as phonon scattering sources, opening up a route for the realisation of Si-based thermoelectric materials. PMID:26434678

  2. Phonon transport control by nanoarchitecture including epitaxial Ge nanodots for Si-based thermoelectric materials

    NASA Astrophysics Data System (ADS)

    Yamasaka, Shuto; Nakamura, Yoshiaki; Ueda, Tomohiro; Takeuchi, Shotaro; Sakai, Akira

    2015-10-01

    Phonon transport in Si films was controlled using epitaxially-grown ultrasmall Ge nanodots (NDs) with ultrahigh density for the purpose of developing Si-based thermoelectric materials. The Si/Ge ND stacked structures, which were formed by the ultrathin SiO2 film technique, exhibited lower thermal conductivities than those of the conventional nanostructured SiGe bulk alloys, despite the stacked structures having a smaller Ge fraction. This came from the large thermal resistance caused by phonon scattering at the Si/Ge ND interfaces. The phonon scattering can be controlled by the Ge ND structure, which was independent of Si layer structure for carrier transport. These results demonstrate the effectiveness of ultrasmall epitaxial Ge NDs as phonon scattering sources, opening up a route for the realisation of Si-based thermoelectric materials.

  3. Phonon transport control by nanoarchitecture including epitaxial Ge nanodots for Si-based thermoelectric materials.

    PubMed

    Yamasaka, Shuto; Nakamura, Yoshiaki; Ueda, Tomohiro; Takeuchi, Shotaro; Sakai, Akira

    2015-01-01

    Phonon transport in Si films was controlled using epitaxially-grown ultrasmall Ge nanodots (NDs) with ultrahigh density for the purpose of developing Si-based thermoelectric materials. The Si/Ge ND stacked structures, which were formed by the ultrathin SiO2 film technique, exhibited lower thermal conductivities than those of the conventional nanostructured SiGe bulk alloys, despite the stacked structures having a smaller Ge fraction. This came from the large thermal resistance caused by phonon scattering at the Si/Ge ND interfaces. The phonon scattering can be controlled by the Ge ND structure, which was independent of Si layer structure for carrier transport. These results demonstrate the effectiveness of ultrasmall epitaxial Ge NDs as phonon scattering sources, opening up a route for the realisation of Si-based thermoelectric materials. PMID:26434678

  4. Results of a Saxitoxin Proficiency Test Including Characterization of Reference Material and Stability Studies.

    PubMed

    Harju, Kirsi; Rapinoja, Marja-Leena; Avondet, Marc-AndrĂ©; Arnold, Werner; SchĂ€r, Martin; LuginbĂŒhl, Werner; Kremp, Anke; Suikkanen, Sanna; KankaanpÀÀ, Harri; Burrell, Stephen; Söderström, Martin; Vanninen, Paula

    2015-12-01

    A saxitoxin (STX) proficiency test (PT) was organized as part of the Establishment of Quality Assurance for the Detection of Biological Toxins of Potential Bioterrorism Risk (EQuATox) project. The aim of this PT was to provide an evaluation of existing methods and the European laboratories' capabilities for the analysis of STX and some of its analogues in real samples. Homogenized mussel material and algal cell materials containing paralytic shellfish poisoning (PSP) toxins were produced as reference sample matrices. The reference material was characterized using various analytical methods. Acidified algal extract samples at two concentration levels were prepared from a bulk culture of PSP toxins producing dinoflagellate Alexandrium ostenfeldii. The homogeneity and stability of the prepared PT samples were studied and found to be fit-for-purpose. Thereafter, eight STX PT samples were sent to ten participating laboratories from eight countries. The PT offered the participating laboratories the possibility to assess their performance regarding the qualitative and quantitative detection of PSP toxins. Various techniques such as official Association of Official Analytical Chemists (AOAC) methods, immunoassays, and liquid chromatography-mass spectrometry were used for sample analyses. PMID:26602927

  5. Results of a Saxitoxin Proficiency Test Including Characterization of Reference Material and Stability Studies

    PubMed Central

    Harju, Kirsi; Rapinoja, Marja-Leena; Avondet, Marc-AndrĂ©; Arnold, Werner; SchĂ€r, Martin; LuginbĂŒhl, Werner; Kremp, Anke; Suikkanen, Sanna; KankaanpÀÀ, Harri; Burrell, Stephen; Söderström, Martin; Vanninen, Paula

    2015-01-01

    A saxitoxin (STX) proficiency test (PT) was organized as part of the Establishment of Quality Assurance for the Detection of Biological Toxins of Potential Bioterrorism Risk (EQuATox) project. The aim of this PT was to provide an evaluation of existing methods and the European laboratories’ capabilities for the analysis of STX and some of its analogues in real samples. Homogenized mussel material and algal cell materials containing paralytic shellfish poisoning (PSP) toxins were produced as reference sample matrices. The reference material was characterized using various analytical methods. Acidified algal extract samples at two concentration levels were prepared from a bulk culture of PSP toxins producing dinoflagellate Alexandrium ostenfeldii. The homogeneity and stability of the prepared PT samples were studied and found to be fit-for-purpose. Thereafter, eight STX PT samples were sent to ten participating laboratories from eight countries. The PT offered the participating laboratories the possibility to assess their performance regarding the qualitative and quantitative detection of PSP toxins. Various techniques such as official Association of Official Analytical Chemists (AOAC) methods, immunoassays, and liquid chromatography-mass spectrometry were used for sample analyses. PMID:26602927

  6. Diffractive laser beam homogenizer including a photo-active material and method of fabricating the same

    DOEpatents

    Bayramian, Andy J; Ebbers, Christopher A; Chen, Diana C

    2014-05-20

    A method of manufacturing a plurality of diffractive optical elements includes providing a partially transmissive slide, providing a first piece of PTR glass, and directing first UV radiation through the partially transmissive slide to impinge on the first piece of PTR glass. The method also includes exposing predetermined portions of the first piece of PTR glass to the first UV radiation and thermally treating the exposed first piece of PTR glass. The method further includes providing a second piece of PTR glass and directing second UV radiation through the thermally treated first piece of PTR glass to impinge on the second piece of PTR glass. The method additionally includes exposing predetermined portions of the second piece of PTR glass to the second UV radiation, thermally treating the exposed second piece of PTR glass, and repeating providing and processing of the second piece of PTR glass using additional pieces of PTR glass.

  7. 75 FR 16514 - Bayer Material Science, LLC, Formally Known as Sheffield Plastics, Including On-Site Leased...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-01

    ... 25, 2010 (75 FR 3934). At the request of the State Agency, the Department reviewed the certification... Employment and Training Administration Bayer Material Science, LLC, Formally Known as Sheffield Plastics... Material Science, LLC, formally known as Sheffield Plastics, including on-site leased workers...

  8. APPENDIX B

    Cancer.gov

    SEER Coding and Staging Manual 2004, Revision 1 APPENDIX B SEER GEOCODES For Coding Place of Birth and Place of Death SEER Coding and Staging Manual 2004, Revision 1 SEER Coding and Staging Manual 2004, Revision 1 Appendix B

  9. APPENDIX C

    Cancer.gov

    Gum C03.0-C03.9, Floor of Mouth C04.0-C04.9, Palate C05.0-C05.9, Other Parts of Mouth C06.0-C06.9 APPENDIX C SITE-SPECIFIC SURGERY CODES January 1998 SEER Program Code Manual, 3rd Edition C-3 SURGERY OF PRIMARY SITE Codes 00 None; no cancer-directed surgery of primary site 10 Local tumor destruction, NOS (WITHOUT PATHOLOGY SPECIMEN) 11 Photodynamic therapy (PDT) 12 Electrocautery; fulguration (includes use of hot forceps for tumor destruction) 13 Cryosurgery 14 Laser No specimen sent to pathology from this surgical event.

  10. Development of microwave absorbing materials prepared from a polymer binder including Japanese lacquer and epoxy resin

    NASA Astrophysics Data System (ADS)

    Iwamaru, T.; Katsumata, H.; Uekusa, S.; Ooyagi, H.; Ishimura, T.; Miyakoshi, T.

    Microwave absorption composites were synthesized from a poly urushiol epoxy resin (PUE) mixed with one of microwave absorbing materials; Ni-Zn ferrite, Soot, Black lead, and carbon nano tube (CNT) to investigate their microwave absorption properties. PUE binders were specially made from Japanese lacquer and epoxy resin, where Japanese lacquer has been traditionally used for bond and paint because it has excellent beauty. Japanese lacquer solidifies with oxygen contained in air's moisture, which has difficulty in making composite, but we improved Japanese lacquer's solidification properties by use of epoxy resin. We made 10 mm thickness composite samples and cut them into toroidal shape to measure permittivity, permeability, and reflection loss in frequencies ranging from 50 Hz to 20 GHz. Electric magnetic absorber's composites synthesized from a PUE binders mixed either with Soot or CNT showed significantly higher wave absorption over -27 dB than the others at frequencies around 18 GHz, although Japanese lacquer itself doesn't affect absorption. This means Japanese lacquer can be used as binder materials for microwave absorbers.

  11. Three Peaks of 2011 Draconid Activity Including that Connected with Pre-1900 Material

    NASA Astrophysics Data System (ADS)

    Koten, Pavel; Vaubaillon, Jeremie; Tóth, Juraj; Margonis, Anastasios; Ďuriơ, Frantiơek

    2014-08-01

    A Draconid meteor shower outburst was observed from on board two scientific aircraft deployed above Northern Europe on 8th October 2011. The activity profile was measured using a set of photographic and video cameras. The main peak of the activity occurred around 20:15 ± 0:0.5 UT which is consistent with the model prediction as well as with the IMO network visual observations. The corrected hourly rates reached a value of almost 350. The brighter meteors peaked about 15-20 min earlier than the dimmer ones. This difference can be explained by different directions of the ejection of the meteoroids from the parent comet. One of the instruments was even able to detect meteors connected with the material ejected from the parent comet before 1900 and thus confirmed the prediction of the model, although it was based on uncertain pre-1900 cometary data. Another small peak of the activity, which was caused by material ejected during the 1926 perihelion passage of the parent comet, was detected around 21:10 UT. The mass distribution index determined using the narrow field-of-view video camera was 2.0 ± 0.1. This work shows that the observation of meteor outbursts can constrain the orbital elements, outgassing activity and existence of jets at the surface of a comet.

  12. A Model for Predicting Grain Boundary Cracking in Polycrystalline Viscoplastic Materials Including Scale Effects

    SciTech Connect

    Allen, D.H.; Helms, K.L.E.; Hurtado, L.D.

    1999-04-06

    A model is developed herein for predicting the mechanical response of inelastic crystalline solids. Particular emphasis is given to the development of microstructural damage along grain boundaries, and the interaction of this damage with intragranular inelasticity caused by dislocation dissipation mechanisms. The model is developed within the concepts of continuum mechanics, with special emphasis on the development of internal boundaries in the continuum by utilizing a cohesive zone model based on fracture mechanics. In addition, the crystalline grains are assumed to be characterized by nonlinear viscoplastic mechanical material behavior in order to account for dislocation generation and migration. Due to the nonlinearities introduced by the crack growth and viscoplastic constitution, a numerical algorithm is utilized to solve representative problems. Implementation of the model to a finite element computational algorithm is therefore briefly described. Finally, sample calculations are presented for a polycrystalline titanium alloy with particular focus on effects of scale on the predicted response.

  13. A model for thermal oxidation of Si and SiC including material expansion

    SciTech Connect

    Christen, T. Ioannidis, A.; Winkelmann, C.

    2015-02-28

    A model based on drift-diffusion-reaction kinetics for Si and SiC oxidation is discussed, which takes the material expansion into account with an additional convection term. The associated velocity field is determined self-consistently from the local reaction rate. The approach allows a calculation of the densities of volatile species in an nm-resolution at the oxidation front. The model is illustrated with simulation results for the growth and impurity redistribution during Si oxidation and for carbon and silicon emission during SiC oxidation. The approach can be useful for the prediction of Si and/or C interstitial distribution, which is particularly relevant for the quality of metal-oxide-semiconductor electronic devices.

  14. A model for thermal oxidation of Si and SiC including material expansion

    NASA Astrophysics Data System (ADS)

    Christen, T.; Ioannidis, A.; Winkelmann, C.

    2015-02-01

    A model based on drift-diffusion-reaction kinetics for Si and SiC oxidation is discussed, which takes the material expansion into account with an additional convection term. The associated velocity field is determined self-consistently from the local reaction rate. The approach allows a calculation of the densities of volatile species in an nm-resolution at the oxidation front. The model is illustrated with simulation results for the growth and impurity redistribution during Si oxidation and for carbon and silicon emission during SiC oxidation. The approach can be useful for the prediction of Si and/or C interstitial distribution, which is particularly relevant for the quality of metal-oxide-semiconductor electronic devices.

  15. 40 CFR 1502.18 - Appendix.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.18 Appendix. If an agency prepares an appendix to an environmental impact statement the appendix shall: (a) Consist of material prepared in connection with an environmental impact statement (as distinct...

  16. 40 CFR 1502.18 - Appendix.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.18 Appendix. If an agency prepares an appendix to an environmental impact statement the appendix shall: (a) Consist of material prepared in connection with an environmental impact statement (as distinct...

  17. 40 CFR 1502.18 - Appendix.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.18 Appendix. If an agency prepares an appendix to an environmental impact statement the appendix shall: (a) Consist of material prepared in connection with an environmental impact statement (as distinct...

  18. 40 CFR 1502.18 - Appendix.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.18 Appendix. If an agency prepares an appendix to an environmental impact statement the appendix shall: (a) Consist of material prepared in connection with an environmental impact statement (as distinct...

  19. Reference materials for analytical toxicology including doping control: freeze-dried urine samples.

    PubMed

    Jiménez, C; Ventura, R; Williams, J; Segura, J; de la Torre, R

    2004-05-01

    The feasibility of freeze-dried urine samples containing doping agents to be used in intercomparison exercises and/or as reference materials has been evaluated. Freeze-dried urine samples containing caffeine, ephedrine derivatives (ephedrine, methylephedrine, norephedrine, pseudoephedrine and norpseudoephedrine), amphetamine derivatives (amphetamine, metamphetamine, 3,4-methylenedioxyamphetamine and 3,4-methylenedioxymethamphetamine) and testosterone and epitestosterone glucuronides have been evaluated. For preparation of the samples, blank urines previously subjected to filtration for clarification were fortified with standard solutions of the corresponding compounds and filtered under sterile conditions. Some aliquots of the sterile liquid samples were used for homogeneity testing, others were stored at -80 degree C for reference purposes, and the rest were subjected to lyophilisation. Freeze-dried urine samples were stored at 4-8 degree C and their stability was assessed for a period up to 18 months. Results obtained showed minimal differences (lower than 5%) between lyophilised and non-lyophilised aliquots (stored at -80 degree C) at all time periods except for amphetamine (up to 18%) and norpseudoephedrine (up to 10%). Nevertheless, such differences remained constant over the entire period of study, indicating that the loss of analytes was due to the initial lyophilisation process. The loss of analytes in freeze-dried samples was due to their volatility. Furthermore, an increase in pH by 1 unit was observed following reconstitution of samples prepared from drug-free urine of commercial origin. PMID:15116239

  20. 10 CFR Appendix H to Part 50 - Reactor Vessel Material Surveillance Program Requirements

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... light water nuclear power reactors which result from exposure of these materials to neutron irradiation... Practice for Conducting Surveillance Tests for Light-Water Cooled Nuclear Power Reactor Vessels”; and ASTM E 185-82, “Standard Practice for Conducting Surveillance Tests for Light-Water Cooled Nuclear...

  1. 10 CFR Appendix H to Part 50 - Reactor Vessel Material Surveillance Program Requirements

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... light water nuclear power reactors which result from exposure of these materials to neutron irradiation... Practice for Conducting Surveillance Tests for Light-Water Cooled Nuclear Power Reactor Vessels”; and ASTM E 185-82, “Standard Practice for Conducting Surveillance Tests for Light-Water Cooled Nuclear...

  2. Overview of the Defense Programs Research and Technology Development Program for fiscal year 1993. Appendix materials

    SciTech Connect

    Not Available

    1993-09-30

    The pages that follow contain summaries of the nine R&TD Program Element Plans for Fiscal Year 1993 that were completed in the Spring of 1993. The nine program elements are aggregated into three program clusters as follows: Design Sciences and Advanced Computation; Advanced Manufacturing Technologies and Capabilities; and Advanced Materials Sciences and Technology.

  3. Skylab experiment performance evaluation manual. Appendix E: Experiment M512 Materials processing facility (MSFC)

    NASA Technical Reports Server (NTRS)

    Thomas, O. H., Jr.

    1973-01-01

    Analyses for Experiment M512, Materials Processing Facility (MSFC), to be used for evaluating the performance of the Skylab corollary experiments under preflight, inflight, and post-flight conditions are presented. Experiment contingency plan workaround procedure and malfunction analyses are presented in order to assist in making the experiment operationally successful.

  4. 49 CFR Appendix B to Part 209 - Federal Railroad Administration Guidelines for Initial Hazardous Materials Assessments

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... determining initial civil penalty assessments for violations of the Hazardous Materials Regulations (HMR). The... $75,000 penalty, except the maximum civil penalty is $175,000 if the violation results in death... violation, for example, the guidelines for shipping paper violations at 49 CFR §§ 172.200-.203....

  5. 49 CFR Appendix B to Part 209 - Federal Railroad Administration Guidelines for Initial Hazardous Materials Assessments

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... determining initial civil penalty assessments for violations of the Hazardous Materials Regulations (HMR). The... $75,000 penalty, except the maximum civil penalty is $175,000 if the violation results in death... violation, for example, the guidelines for shipping paper violations at 49 CFR §§ 172.200-.203....

  6. 49 CFR Appendix B to Part 209 - Federal Railroad Administration Guidelines for Initial Hazardous Materials Assessments

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... determining initial civil penalty assessments for violations of the Hazardous Materials Regulations (HMR). The... the maximum civil penalty is $110,000 if the violation results in death, serious illness or severe... example, the guidelines for shipping paper violations at 49 CFR §§ 172.200-.203. All penalties in...

  7. 49 CFR Appendix B to Part 209 - Federal Railroad Administration Guidelines for Initial Hazardous Materials Assessments

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... determining initial civil penalty assessments for violations of the Hazardous Materials Regulations (HMR). The... the maximum civil penalty is $110,000 if the violation results in death, serious illness or severe... example, the guidelines for shipping paper violations at 49 CFR §§ 172.200-.203. All penalties in...

  8. 49 CFR Appendix B to Part 209 - Federal Railroad Administration Guidelines for Initial Hazardous Materials Assessments

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... determining initial civil penalty assessments for violations of the Hazardous Materials Regulations (HMR). The... the maximum civil penalty is $110,000 if the violation results in death, serious illness or severe... example, the guidelines for shipping paper violations at 49 CFR §§ 172.200-.203. All penalties in...

  9. 10 CFR Appendix H to Part 50 - Reactor Vessel Material Surveillance Program Requirements

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... light water nuclear power reactors which result from exposure of these materials to neutron irradiation... the beltline region so that the specimen irradiation history duplicates, to the extent practicable... insertion of replacement capsules. Accelerated irradiation capsules may be used in addition to the...

  10. 34 CFR Appendix C to Part 300 - National Instructional Materials Accessibility Standard (NIMAS)

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... whichever page(s) contain(s) ISBN and copyright information), and a full set of the content's images. All of the images included within a work must be provided in a folder and placeholders entered in the relevant XML document indicating their location (all images must be included). The preferred image type...

  11. Efficient parallel seismic simulations including topography and 3-D material heterogeneities on locally refined composite grids

    NASA Astrophysics Data System (ADS)

    Petersson, Anders; Rodgers, Arthur

    2010-05-01

    The finite difference method on a uniform Cartesian grid is a highly efficient and easy to implement technique for solving the elastic wave equation in seismic applications. However, the spacing in a uniform Cartesian grid is fixed throughout the computational domain, whereas the resolution requirements in realistic seismic simulations usually are higher near the surface than at depth. This can be seen from the well-known formula h ? L-P which relates the grid spacing h to the wave length L, and the required number of grid points per wavelength P for obtaining an accurate solution. The compressional and shear wave lengths in the earth generally increase with depth and are often a factor of ten larger below the Moho discontinuity (at about 30 km depth), than in sedimentary basins near the surface. A uniform grid must have a grid spacing based on the small wave lengths near the surface, which results in over-resolving the solution at depth. As a result, the number of points in a uniform grid is unnecessarily large. In the wave propagation project (WPP) code, we address the over-resolution-at-depth issue by generalizing our previously developed single grid finite difference scheme to work on a composite grid consisting of a set of structured rectangular grids of different spacings, with hanging nodes on the grid refinement interfaces. The computational domain in a regional seismic simulation often extends to depth 40-50 km. Hence, using a refinement ratio of two, we need about three grid refinements from the bottom of the computational domain to the surface, to keep the local grid size in approximate parity with the local wave lengths. The challenge of the composite grid approach is to find a stable and accurate method for coupling the solution across the grid refinement interface. Of particular importance is the treatment of the solution at the hanging nodes, i.e., the fine grid points which are located in between coarse grid points. WPP implements a new, energy conserving, coupling procedure for the elastic wave equation at grid refinement interfaces. When used together with our single grid finite difference scheme, it results in a method which is provably stable, without artificial dissipation, for arbitrary heterogeneous isotropic elastic materials. The new coupling procedure is based on satisfying the summation-by-parts principle across refinement interfaces. From a practical standpoint, an important advantage of the proposed method is the absence of tunable numerical parameters, which seldom are appreciated by application experts. In WPP, the composite grid discretization is combined with a curvilinear grid approach that enables accurate modeling of free surfaces on realistic (non-planar) topography. The overall method satisfies the summation-by-parts principle and is stable under a CFL time step restriction. A feature of great practical importance is that WPP automatically generates the composite grid based on the user provided topography and the depths of the grid refinement interfaces. The WPP code has been verified extensively, for example using the method of manufactured solutions, by solving Lamb's problem, by solving various layer over half- space problems and comparing to semi-analytic (FK) results, and by simulating scenario earthquakes where results from other seismic simulation codes are available. WPP has also been validated against seismographic recordings of moderate earthquakes. WPP performs well on large parallel computers and has been run on up to 32,768 processors using about 26 Billion grid points (78 Billion DOF) and 41,000 time steps. WPP is an open source code that is available under the Gnu general public license.

  12. Accurate measurement of silver isotopic compositions in geological materials including low Pd/Ag meteorites

    NASA Astrophysics Data System (ADS)

    Woodland, S. J.; Rehkämper, M.; Halliday, A. N.; Lee, D.-C.; Hattendorf, B.; Günther, D.

    2005-04-01

    Very precise silver (Ag) isotopic compositions have been determined for a number of terrestrial rocks, and high and low Pd/Ag meteorites by utilizing multicollector inductively coupled plasma mass spectrometry (MC-ICPMS). The meteorites include primitive chondrites, the Group IAB iron meteorites Canyon Diablo and Toluca, and the Group IIIAB iron meteorite Grant. Silver isotopic measurements are primarily of interest because 107Ag was produced by decay of the short-lived radionuclide 107Pd during the formation of the solar system and hence the Pd-Ag chronometer has set constraints on the timing of early planetesimal formation. A 2? precision of ±0.05‰ can be obtained for analyses of standard solutions when Ag isotopic ratios are normalized to Pd, to correct for instrumental mass discrimination, and to bracketing standards. Caution must be exercised when making Ag isotopic measurements because isotopic artifacts can be generated in the laboratory and during mass spectrometry. The external reproducibility for geological samples based on replicate analyses of rocks is ±0.2‰ (2?). All chondrites analyzed have similar Ag isotopic compositions that do not differ significantly (>0.3‰) from the 'terrestrial' value of the NIST SRM 978a Ag isotope standard. Hence, they show no evidence of excess 107Ag derived from 107Pd decay or, of stable Ag isotope fractionation associated with volatile element depletion within the accretion disk or from parent body metamorphism. The Group IAB iron meteorite samples analyzed show evidence of complex behavior and disturbance of Ag isotope systematics. Therefore, care must be taken when using this group of iron meteorites to obtain chronological information based on the Pd-Ag decay scheme.

  13. Method for contamination control and barrier apparatus with filter for containing waste materials that include dangerous particulate matter

    DOEpatents

    Pinson, P.A.

    1998-02-24

    A container for hazardous waste materials that includes air or other gas carrying dangerous particulate matter has incorporated barrier material, preferably in the form of a flexible sheet, and one or more filters for the dangerous particulate matter sealably attached to such barrier material. The filter is preferably a HEPA type filter and is preferably chemically bonded to the barrier materials. The filter or filters are preferably flexibly bonded to the barrier material marginally and peripherally of the filter or marginally and peripherally of air or other gas outlet openings in the barrier material, which may be a plastic bag. The filter may be provided with a backing panel of barrier material having an opening or openings for the passage of air or other gas into the filter or filters. Such backing panel is bonded marginally and peripherally thereof to the barrier material or to both it and the filter or filters. A coupling or couplings for deflating and inflating the container may be incorporated. Confining a hazardous waste material in such a container, rapidly deflating the container and disposing of the container, constitutes one aspect of the method of the invention. The chemical bonding procedure for producing the container constitutes another aspect of the method of the invention. 3 figs.

  14. Method for contamination control and barrier apparatus with filter for containing waste materials that include dangerous particulate matter

    DOEpatents

    Pinson, Paul A.

    1998-01-01

    A container for hazardous waste materials that includes air or other gas carrying dangerous particulate matter has incorporated in barrier material, preferably in the form of a flexible sheet, one or more filters for the dangerous particulate matter sealably attached to such barrier material. The filter is preferably a HEPA type filter and is preferably chemically bonded to the barrier materials. The filter or filters are preferably flexibly bonded to the barrier material marginally and peripherally of the filter or marginally and peripherally of air or other gas outlet openings in the barrier material, which may be a plastic bag. The filter may be provided with a backing panel of barrier material having an opening or openings for the passage of air or other gas into the filter or filters. Such backing panel is bonded marginally and peripherally thereof to the barrier material or to both it and the filter or filters. A coupling or couplings for deflating and inflating the container may be incorporated. Confining a hazardous waste material in such a container, rapidly deflating the container and disposing of the container, constitutes one aspect of the method of the invention. The chemical bonding procedure for producing the container constitutes another aspect of the method of the invention.

  15. 34 CFR Appendix C to Part 300 - National Instructional Materials Accessibility Standard (NIMAS)

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... several refer to a single , each prodnote has the same . img Points to the image to be rendered. An may... relevant XML document indicating their location (all images must be included). The preferred image type is... recursively and/or intermixed with . br Marks a forced line break. line Marks a single logical line of...

  16. 34 CFR Appendix C to Part 300 - National Instructional Materials Accessibility Standard (NIMAS)

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... several refer to a single , each prodnote has the same . img Points to the image to be rendered. An may... relevant XML document indicating their location (all images must be included). The preferred image type is... recursively and/or intermixed with . br Marks a forced line break. line Marks a single logical line of...

  17. 34 CFR Appendix C to Part 300 - National Instructional Materials Accessibility Standard (NIMAS)

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... several refer to a single , each prodnote has the same . img Points to the image to be rendered. An may... relevant XML document indicating their location (all images must be included). The preferred image type is... recursively and/or intermixed with . br Marks a forced line break. line Marks a single logical line of...

  18. The Normal Appendix on CT: Does Size Matter?

    PubMed Central

    Willekens, Inneke; Peeters, Els; De Maeseneer, Michel; de Mey, Johan

    2014-01-01

    Purpose (1) To evaluate the frequency of visualisation and measurements of the normal appendix. (2) To correlate Body Mass Index (BMI) and gender with visualisation of the normal appendix. (3) To correlate age, gender and body length with appendiceal length. Materials and Methods A retrospective review of 186 patients undergoing abdominal CT without suspicion of acute appendicitis was done. Frequency of visualisation and measurements (including maximal outer diameter, wall thickness, length, content, location of base and tip) of normal appendices were recorded. Results Prevalence of appendectomy was 34.4%. Sensitivity, specificity, positive predictive value, negative predictive value, and accuracy of visualisation of the normal appendix were 76%, 94%, 96%, 67%, and 82% respectively. The mean maximal diameter of the appendix was 8.19 mm±1.6 (SD) (range, 4.2–12.8 mm). The mean length of the appendix was 81.11 mm±28.44 (SD) (range, 7.2–158.8 mm). The mean wall thickness of the appendix was 2.22 mm±0.56 (SD) (range, 1.15–3.85 mm). The most common location of the appendiceal tip was pelvic in 66% appendices. The most common location of the appendiceal base was inferior, medial, and posterior in 37%. The normal appendix contained high-density material in 2.2%. There was a significant correlation between gender and appendiceal length, with men having longer appendices than women. Conclusion Most normal appendices are seen at multislice CT using IV contrast. The maximal outer diameter of the normal appendix overlaps with values currently used to diagnose appendicitis on CT. PMID:24802879

  19. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Types of materials included in scope of assassination record and additional records and information. 1290.4 Section 1290.4 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS GUIDANCE FOR INTERPRETATION AND IMPLEMENTATION...

  20. 10 CFR 170.31 - Schedule of fees for materials licenses and other regulatory services, including inspections, and...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...-related Greater than Class C (GTCC) waste at an independent spent fuel storage installation (ISFSI) Full... than uranium or thorium, including licenses authorizing the possession of byproduct waste material... persons for possession and disposal incidental to the disposal of the uranium waste tailings generated...

  1. Construction safety program for the National Ignition Facility, Appendix B

    SciTech Connect

    Cerruti, S.J.

    1997-06-26

    This Appendix contains material from the LLNL Health and Safety Manual as listed below. For sections not included in this list, please refer to the Manual itself. The areas covered are: asbestos, lead, fire prevention, lockout, and tag program confined space traffic safety.

  2. 12 CFR Appendix B to Part 226 - State Exemptions

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... procedures herein and the Board's Rules of Procedure (12 CFR part 262). Supporting Documents An application... of Information (12 CFR part 261), all applications made, including any documents and other material... 12 Banks and Banking 3 2011-01-01 2011-01-01 false State Exemptions B Appendix B to Part 226...

  3. 12 CFR Appendix B to Part 226 - State Exemptions

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... procedures herein and the Board's Rules of Procedure (12 CFR Part 262). Supporting Documents An application... of Information (12 CFR Part 261), all applications made, including any documents and other material... 12 Banks and Banking 3 2014-01-01 2014-01-01 false State Exemptions B Appendix B to Part 226...

  4. 12 CFR Appendix B to Part 226 - State Exemptions

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... procedures herein and the Board's Rules of Procedure (12 CFR Part 262). Supporting Documents An application... of Information (12 CFR Part 261), all applications made, including any documents and other material... 12 Banks and Banking 3 2013-01-01 2013-01-01 false State Exemptions B Appendix B to Part 226...

  5. 12 CFR Appendix B to Part 226 - State Exemptions

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... procedures herein and the Board's Rules of Procedure (12 CFR Part 262). Supporting Documents An application... of Information (12 CFR Part 261), all applications made, including any documents and other material... 12 Banks and Banking 3 2012-01-01 2012-01-01 false State Exemptions B Appendix B to Part 226...

  6. Research Involving Children: Appendix to Report and Recommendations.

    ERIC Educational Resources Information Center

    Commission for the Protection of Human Subjects of Biomedical and Behavioral Research, Washington, DC.

    The appendix contains papers, reports, and other materials that were reviewed by the National Commission for the Protection of Human Subjects of Biomedical and Behavioral Research during its deliberations on research involving children. Entries include the following titles and authors: "Research Involving Children" (Survey Research Center); "Law…

  7. Appendix A; Appendix B

    SciTech Connect

    Dragan C. Curcija

    2006-09-15

    This is the summary page for the technical and other reports on the DOE Cooperative Agreement DE-FC36-94CH10604 for the period of January 1, 2000 to December 31, 2004. The progress, technical and other reports and publications are consolidated by the contracting year and also by the cooperative agreement tasks. The listing sorted by tasks is also sub-sorted by fiscal year for easier navigation. These listings are given in appendix A and Appendix B of this summary report. Individual report files are located in each fiscal year directory (i.e., FY00, FY01, etc. up to FY04). The complete listing and report files are also posted on the web site and is fully navigable by these two criteria. The web site is at: http://www.ceere.org/beep/beep{_}pubsanddownloads.html. More significant and less obvious part of deliverables are applications of this research, which are used in everyday operations of NFRC, software tools and manufacturers design practice, which has significantly changed as a result of this and related research efforts.

  8. 23 CFR Appendix to Subpart F of... - Alternate Method of Determining the Color of Retroreflective Sign Materials and Pavement Marking...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS TRAFFIC OPERATIONS Traffic Control Devices on Federal-Aid and Other Streets and Highways Pt. 655, Subpt. F, App. Appendix to....210 0.160 0.137 0.038 Light Blue 0.180 0.260 0.240 0.300 0.270 0.260 0.230 0.200 Purple 0.302 0.064...

  9. 23 CFR Appendix to Subpart F of... - Alternate Method of Determining the Color of Retroreflective Sign Materials and Pavement Marking...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS TRAFFIC OPERATIONS Traffic Control Devices on Federal-Aid and Other Streets and Highways Pt. 655, Subpt. F, App. Appendix to....210 0.160 0.137 0.038 Light Blue 0.180 0.260 0.240 0.300 0.270 0.260 0.230 0.200 Purple 0.302 0.064...

  10. 23 CFR Appendix to Subpart F of... - Alternate Method of Determining the Color of Retroreflective Sign Materials and Pavement Marking...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS TRAFFIC OPERATIONS Traffic Control Devices on Federal-Aid and Other Streets and Highways Pt. 655, Subpt. F, App. Appendix to....210 0.160 0.137 0.038 Light Blue 0.180 0.260 0.240 0.300 0.270 0.260 0.230 0.200 Purple 0.302 0.064...

  11. 23 CFR Appendix to Subpart F of... - Alternate Method of Determining the Color of Retroreflective Sign Materials and Pavement Marking...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS TRAFFIC OPERATIONS Traffic Control Devices on Federal-Aid and Other Streets and Highways Pt. 655, Subpt. F, App. Appendix to....210 0.160 0.137 0.038 Light Blue 0.180 0.260 0.240 0.300 0.270 0.260 0.230 0.200 Purple 0.302 0.064...

  12. 23 CFR Appendix to Subpart F of... - Alternate Method of Determining the Color of Retroreflective Sign Materials and Pavement Marking...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS TRAFFIC OPERATIONS Traffic Control Devices on Federal-Aid and Other Streets and Highways Pt. 655, Subpt. F, App. Appendix to....210 0.160 0.137 0.038 Light Blue 0.180 0.260 0.240 0.300 0.270 0.260 0.230 0.200 Purple 0.302 0.064...

  13. Image Display and Manipulation System (IDAMS) program documentation, Appendixes A-D. [including routines, convolution filtering, image expansion, and fast Fourier transformation

    NASA Technical Reports Server (NTRS)

    Cecil, R. W.; White, R. A.; Szczur, M. R.

    1972-01-01

    The IDAMS Processor is a package of task routines and support software that performs convolution filtering, image expansion, fast Fourier transformation, and other operations on a digital image tape. A unique task control card for that program, together with any necessary parameter cards, selects each processing technique to be applied to the input image. A variable number of tasks can be selected for execution by including the proper task and parameter cards in the input deck. An executive maintains control of the run; it initiates execution of each task in turn and handles any necessary error processing.

  14. Stirling Space Engine Program. Volume 2; Appendixes A, B, C and D

    NASA Technical Reports Server (NTRS)

    Dhar, Manmohan

    1999-01-01

    The objective of this program was to develop the technology necessary for operating Stirling power converters in a space environment and to demonstrate this technology in full-scale engine tests. Volume 2 of the report includes the following appendices: Appendix A: Heater Head Development (Starfish Heater Head Program, 1/10th Segment and Full-Scale Heat Pipes, and Sodium Filling and Processing); Appendix B: Component Test Power Converter (CTPC) Component Development (High-temperature Organic Materials, Heat Exchanger Fabrication, Beryllium Issues, Sodium Issues, Wear Couple Tests, Pressure Boundary Penetrations, Heating System Heaters, and Cooler Flow Test); Appendix C: Udimet Testing (Selection of the Reference Material for the Space Stirling Engine Heater Head, Udimet 720LI Creep Test Result Update, Final Summary of Space Stirling Endurance Engine Udimet 720L1 Fatigue Testing Results, Udimet 720l1 Weld Development Summary, and Udimet 720L1 Creep Test Final Results Summary), and Appendix D: CTPC Component Development Photos.

  15. 49 CFR Appendix A to Part 173 - [Reserved

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false A Appendix A to Part 173 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF... Appendix A to Part 173...

  16. 49 CFR Appendix A to Part 192 - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false A Appendix A to Part 192 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION...: MINIMUM FEDERAL SAFETY STANDARDS Appendix A to Part 192...

  17. 14 CFR Appendix C to Part 151 - Appendix C to Part 151

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Appendix C to Part 151 C Appendix C to Part...) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. C Appendix C to Part 151 There is set forth below an... Items 1. Maintenance-type work, including: (a) Seal coats. (b) Crack filling. (c) Resealing joints....

  18. Cathode material comparison of thermal runaway behavior of Li-ion cells at different state of charges including over charge

    NASA Astrophysics Data System (ADS)

    Mendoza-Hernandez, Omar Samuel; Ishikawa, Hiroaki; Nishikawa, Yuuki; Maruyama, Yuki; Umeda, Minoru

    2015-04-01

    The analysis of Li-ion secondary cells under outstanding conditions, as overcharge and high temperatures, is important to determine thermal abuse characteristics of electroactive materials and precise risk assessments on Li-ion cells. In this work, the thermal runaway behavior of LiCoO2 and LiMn2O4 cathode materials were compared at different state of charges (SOCs), including overcharge, by carrying out accelerating rate calorimetry (ARC) measurements using 18650 Li-ion cells. Onset temperatures of self-heating reactions and thermal runaway behavior were identified, and by using these onset points thermal mapping plots were made. We were able to identify non-self-heating, self-heating and thermal runaway regions as a function of state of charge and temperature. The cell using LiMn2O4 cathode material was found to be more thermally stable than the cell using LiCoO2. In parallel with the ARC measurements, the electrochemical behavior of the cells was monitored by measuring the OCV and internal resistance of the cells. The electrochemical behavior of the cells showed a slightly dependency on SOC.

  19. Appendix (image)

    MedlinePLUS

    ... become infected. Although most people are familiar with appendicitis, it is a relatively rare disease. It is ... of the appendix (appendectomy). Recovery time for uncomplicated appendicitis is usually just three days.

  20. Design and characterization of a composite material based on Sr(II)-loaded clay nanotubes included within a biopolymer matrix.

    PubMed

    Del Buffa, Stefano; Bonini, Massimo; Ridi, Francesca; Severi, Mirko; Losi, Paola; Volpi, Silvia; Al Kayal, Tamer; Soldani, Giorgio; Baglioni, Piero

    2015-06-15

    This paper reports on the preparation, characterization, and cytotoxicity of a hybrid nanocomposite material made of Sr(II)-loaded Halloysite nanotubes included within a biopolymer (3-polyhydroxybutyrate-co-3-hydroxyvalerate) matrix. The Sr(II)-loaded inorganic scaffold is intended to provide mechanical resistance, multi-scale porosity, and to favor the in-situ regeneration of bone tissue thanks to its biocompatibility and bioactivity. The interaction of the hybrid system with the physiological environment is mediated by the biopolymer coating, which acts as a binder, as well as a diffusional barrier to the Sr(II) release. The degradation of the polymer progressively leads to the exposure of the Sr(II)-loaded Halloysite scaffold, tuning its interaction with osteogenic cells. The in vitro biocompatibility of the composite was demonstrated by cytotoxicity tests on L929 fibroblast cells. The results indicate that this composite material could be of interest for multiple strategies in the field of bone tissue engineering. PMID:25778738

  1. CONFERENCE SUMMARY: Summary and comment on superconducting analogue electronics research, including materials and fabrication, as presented at ISEC 07

    NASA Astrophysics Data System (ADS)

    Foley, C. P.

    2007-11-01

    The main theme at ISEC 2007 for superconducting materials, fabrication and analogue electronics was the description of incremental developments, including a few new directions that indicate breakthroughs in this area of research. The work on applications focused on their cost-benefit analysis (in order to improve their appeal), the development of simpler systems, making more of the data collected, improving packaging and being responsive to the power handling requirements for commercial systems. All papers presenting this level of research highlighted the importance of obtaining all the necessary details in order to investigate analogue devices and the effectiveness and commercial viability of their systems. This stage of development is important if we are to achieve the transition of superconducting electronics from the laboratory to commercial use. There were some exciting disruptive breakthroughs reported. These were in the areas of nano-SQUIDs, rotating gradiometers, superconducting scanning tunnelling microscopy (Hayashi et al) and the potential of superconducting photonics using optical interfaces with superconducting vortex flow transistors, for example. The materials research in low (LTS), high (HTS) and medium (MTS) critical temperature superconductors was reported. In LTS, nitrides emerged as important materials for use as new tunnel barriers, either insulating or semiconducting. Papers on BaN, NbN, TaN, GaN and Nb-Si superconducting materials were also presented. The MTS material of MgB2 is still under development (Zhao et al). There were also new research groups from South Africa and Turkey attending the conference. The fabrication research presented covered the areas of critical current Ic spread, which is still an issue in reducing the reproducibility of Josephson junctions, a 150 mm process for Nb/Al-AlOx/Nb and methods to improve barrier layers using both new materials and smooth surfaces at thin film interfaces (Du et al). New methods to make sub-micron Josephson junctions using laser etching (BĂŒttner et al) and the development of passivation layers using amorphous YBCO and SiO2 (Seidel et al) were also presented. Characterization methods using Raman and photo-emission spectroscopy (Kikunaga et al) emerged as fresh approaches. Josephson junction (JJ) research covered the areas of critical current fluctuations where results on Tl-based junctions suggested a 40 times lower ÎŽI/Ic, and LTS junctions for voltage standards using a Nb-Si barrier for improved SNS junctions (Kieler et al). Development of MTS junctions based on MgB2 are yet to be realized with the interface barrier appearing to be the limiting factor. HTS Josephson junctions were reviewed by asking the question: `Are all HTS JJs the same?' with a clear `no' as the answer. Research on intrinsic stacked junctions, sub-micron junctions, the manipulation of electronic band structure to increase energy gap and mid-gap states was also presented. Developments in packaging and cooling were not as dominant at this conference as in previous years. However, there was research reported on the importance of non-magnetic structures in packaging, the design of magnetic shielding improvement by using finite element analysis to optimize design (Tanaka et al) and the use of cryocoolers (Vernik et al). SQUID research reported some breakthrough developments with new ideas presented on nano-SQUIDs with the possible detection of a ferritin spin-flip, a successful airborne trial using a rotating gradiometer and the development of a new 4 cm long baseline planar gradiometer, achieving a sensitivity of 35 fT cm-1 Hz-Âœ. Applications in non-destructive evaluation (NDE) covered the use of SQUIDs in the detection of stainless steel foreign objects in food, defects in wire and circuit boards and surface imaging with most developments focusing on potential customer requirements. Biomagnetic applications have continued to be embraced in the use of SQUIDs in MRI (Zotev et al), NMR, MEG (including one paper that did not use SQUIDs), immunoassays (close to single cell detection—30 cells to date) and in spinal cord injury detection using quadrapoles. Instrumentation using various devices for thermometers (fast response), micro-susceptometers, current comparators and spin-flip measurements were reported. There were few papers on the use of SQUIDs for geophysical prospecting. This area of application is now commercially mature with research in the field being presented at mineral exploration conferences. However, one paper reported the development of an HTS transient electromagnetic (TEM) system with similar sensitivities to those demonstrated by LTS systems due to improved electronics. The application of nuclear quadrupole resonance for explosives using gate arrays for noise reduction was also reported. There were some novel devices presented with an excellent overview on SQUIFs which were first suggested by Richard Feynman in his well-known university lecture series in physics. This work continues with the aim of achieving the measurement of the absolute value (or true field) of magnetic fields with the question being asked: `Can you really create a zero magnetic field environment?'. Detector research presented at the conference considered the exciting applications in THz imaging. Superconducting bolometers with anti-reflection coatings and using MgB2 (Portesi et al) were reported suggesting improved performance. The application for the improvedr discrimination of radioactive materials by spectroscopy will be very important in the implementation of the Nuclear Non-proliferation Treaty. Single-photon detectors were reported using Nb nanowires (NbN), ferromagnets in nanolayers and SiN transition edge absorbers. Resonators based on SQUID arrays (He et al) and frequency adjustable Josephson junctions were also reported, along with receivers for radio astronomy. Filters have been found to be improved using MgB2, which showed increased Q factors using a split-ring element design (68000 at 5 GHz). This author also used the summing-up session to talk about the need for cooperation leading up to the setting of international standards for superconducting devices. For instance, in the standardization of connections to coolers to enable black box operation, in order to achieve the long-term vision that one day anyone could source a superconducting component from a standard electronics catalogue! Finally, some general comments on the conference. There were not many students (or females) as attendees, which suggests we need to consider more closely the future generation to take the current research to fruition. Nevertheless there was a clear movement forward with some exciting new developments and some new research groups participating, but some important superconducting electronics research groups did not attend. This calls into question the status of the funding of research into superconducting electronics. However, some clear applications, where superconducting electronics provides the only solution, are clearly achieving maturity in their development and adoption. Our research community needs to make sure these developments are recognized to ensure a healthy future for superconducting electronics research, development and commercialization.

  2. Mechanical behavior of human aortas: Experiments, material constants and 3-D finite element modeling including residual stress.

    PubMed

    Labrosse, Michel R; Beller, Carsten J; Mesana, Thierry; Veinot, John P

    2009-05-29

    Segments of fresh human ascending, thoracic descending and abdominal aortas from eight male sexagenarians were pressurized under closed-end and free extension conditions. The median unpressurized inner radii for the ascending, thoracic and abdominal locations were 14.21, 9.67 and 7.16mm, respectively. The median thickness was similar in the ascending and thoracic regions, at about 1.6mm, while it was 1.2mm in the abdominal region. The opening angle was not statistically different between regions, with a median of -38 degrees . Under 13.3kPa pressure, the median circumferential stretch ratio was about 1.26 in all three aortic locations; the median longitudinal stretch ratio was similar in the ascending and thoracic regions, at about 1.13, while it was 1.05 in the abdominal region. Material constants for a three-dimensional hyperelastic anisotropic constitutive model were determined. Experimental, analytical and finite element results showed excellent agreement, validating the novel experimental approach and the numerical methods used. When residual stress was not taken into account, stresses were highest on the inside of the aorta, with a gradient across the wall of about 200 and 50kPa in the circumferential and longitudinal directions, respectively. When residual stress was included as described by negative opening angles, stresses were highest on the outside of the aorta, with a gradient across the wall in excess of 400kPa for the circumferential direction, and on the order of 150kPa for the longitudinal direction. The mechanical consequences of negative opening angles had not been appreciated so far, and deserve further investigation. PMID:19345356

  3. Teacher-Made Tactile Science Materials with Critical and Creative Thinking Activities for Learners Including Those with Visual Impairments

    ERIC Educational Resources Information Center

    Teske, Jolene K.; Gray, Phyllis; Kuhn, Mason A.; Clausen, Courtney K.; Smith, Latisha L.; Alsubia, Sukainah A.; Ghayoorad, Maryam; Rule, Audrey C.; Schneider, Jean Suchsland

    2014-01-01

    Gifted students with visual impairments are twice exceptional learners and may not evidence their advanced science aptitudes without appropriate accommodations for learning science. However, effective tactile science teaching materials may be easily made. Recent research has shown that when tactile materials are used with "all" students


  4. Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Includes May 1979 edition and Supplements 1-15.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

    Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracts/indexed materials include all levels of government, private concerns, and educational…

  5. APPENDIX A

    Cancer.gov

    SEER Coding And Coding Manual 2004, Revision 1 APPENDIX A COUNTY CODES SEER Coding And Coding Manual 2004, Revision 1 This page left blank SEER Coding And Staging Manual 2004, Revision 1 The following are the valid county codes for coding county

  6. The Protocol Materials Movement: An Exemplar of Efforts To Wed Theory and Practice in Teacher Education

    ERIC Educational Resources Information Center

    Cruickshank, Donald R.

    1974-01-01

    The author defines protocol materials, discusses their development, then examines how the initiation of U.S. Office of Education (USOE) support modified the original definition. (The USOE Master Coordinate System is included as an appendix.) (JA)

  7. Appendix C: Recharge

    SciTech Connect

    Fayer, Michael J.; Keller, Jason M.

    2008-01-17

    This appendix provides estimates of recharge rates for the soil and vegetation conditions in and around the single-shell tank (SST) waste management areas (WMAs). The purpose is to combine published data with recent information to provide the most current recharge estimates. Recharge rates were estimated for areas that remain natural and undisturbed, areas where the vegetation has been disturbed, areas where both the vegetation and the soil have been disturbed, and areas that are engineered (e.g., surface barrier). Methods used include lysimetry, tracers, and simuations. This appendix summarizes the information in the recharge data package for the SST Waste Management Areas), which builds upon previous reports on the Hanford vadose zone data and Integrated Disposal Facility recharge with information available after those reports were published, including field measurements and simulations using weather data through 2006.

  8. 40 CFR 60.1095 - What must I include in the public meeting on my revised materials separation plan?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... revised materials separation plan? As part of the public meeting for review of the siting analysis, as specified under “Preconstruction Requirements: Siting Analysis” (§ 60.1140), you must discuss two areas:...

  9. 40 CFR 60.1095 - What must I include in the public meeting on my revised materials separation plan?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... revised materials separation plan? As part of the public meeting for review of the siting analysis, as specified under “Preconstruction Requirements: Siting Analysis” (§ 60.1140), you must discuss two areas:...

  10. 40 CFR 60.1095 - What must I include in the public meeting on my revised materials separation plan?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... revised materials separation plan? As part of the public meeting for review of the siting analysis, as specified under “Preconstruction Requirements: Siting Analysis” (§ 60.1140), you must discuss two areas:...

  11. 40 CFR 60.1095 - What must I include in the public meeting on my revised materials separation plan?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... revised materials separation plan? As part of the public meeting for review of the siting analysis, as specified under “Preconstruction Requirements: Siting Analysis” (§ 60.1140), you must discuss two areas:...

  12. 40 CFR 60.1095 - What must I include in the public meeting on my revised materials separation plan?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... revised materials separation plan? As part of the public meeting for review of the siting analysis, as specified under “Preconstruction Requirements: Siting Analysis” (§ 60.1140), you must discuss two areas:...

  13. 29 CFR 1917.50 - Certification of marine terminal material handling devices (See also mandatory appendix I, of...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... exceeded. (5) Special gear. (i) Special stevedoring gear provided by the employer, the strength of which... 29 Labor 7 2010-07-01 2010-07-01 false Certification of marine terminal material handling devices... TERMINALS Cargo Handling Gear and Equipment § 1917.50 Certification of marine terminal material...

  14. 29 CFR 1917.50 - Certification of marine terminal material handling devices (See also mandatory appendix I, of...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... exceeded. (5) Special gear. (i) Special stevedoring gear provided by the employer, the strength of which... 29 Labor 7 2012-07-01 2012-07-01 false Certification of marine terminal material handling devices... TERMINALS Cargo Handling Gear and Equipment § 1917.50 Certification of marine terminal material...

  15. 29 CFR 1917.50 - Certification of marine terminal material handling devices (See also mandatory appendix I, of...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... exceeded. (5) Special gear. (i) Special stevedoring gear provided by the employer, the strength of which... 29 Labor 7 2014-07-01 2014-07-01 false Certification of marine terminal material handling devices... TERMINALS Cargo Handling Gear and Equipment § 1917.50 Certification of marine terminal material...

  16. 29 CFR 1917.50 - Certification of marine terminal material handling devices (See also mandatory appendix I, of...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... exceeded. (5) Special gear. (i) Special stevedoring gear provided by the employer, the strength of which... 29 Labor 7 2011-07-01 2011-07-01 false Certification of marine terminal material handling devices... TERMINALS Cargo Handling Gear and Equipment § 1917.50 Certification of marine terminal material...

  17. 29 CFR 1917.50 - Certification of marine terminal material handling devices (See also mandatory appendix I, of...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... exceeded. (5) Special gear. (i) Special stevedoring gear provided by the employer, the strength of which... 29 Labor 7 2013-07-01 2013-07-01 false Certification of marine terminal material handling devices... TERMINALS Cargo Handling Gear and Equipment § 1917.50 Certification of marine terminal material...

  18. 12 CFR Appendix A to Part 1026 - Effect on State Laws

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... and Information (12 CFR part 1070), all requests made, including any documents and other material... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Effect on State Laws A Appendix A to Part 1026 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION TRUTH IN LENDING (REGULATION Z) Pt. 1026,...

  19. 12 CFR Appendix A to Part 1026 - Effect on State Laws

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... and Information (12 CFR Part 1070), all requests made, including any documents and other material... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Effect on State Laws A Appendix A to Part 1026 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION TRUTH IN LENDING (REGULATION Z) Pt. 1026,...

  20. Innovative techniques for the production of energetic radicals for lunar materials processing including photogeneration via concentrated solar energy

    NASA Technical Reports Server (NTRS)

    Osborn, D. E.; Lynch, D. C.; Fazzolari, R.

    1990-01-01

    The Department of Materials Science and Engineering (MSE) is investigating the use of monatomic chlorine produced in a cold plasma to recover oxygen and metallurgically significant metals from lunar materials. Development of techniques for the production of the chlorine radical (and other energetic radicals for these processes) using local planetary resources is a key step for a successful approach. It was demonstrated terrestrially that the use of UV light to energize the photogeneration of OH radicals from ozone or hydrogen peroxide in aqueous solutions can lead to rapid reaction rates for the breakdown of toxic organic compounds in water. A key question is how to use the expanded solar resource at the lunar surface to generate process-useful radicals. This project is aimed at investigating that question.

  1. Innovative techniques for the production of energetic radicals for lunar materials processing including photogeneration via concentrated solar energy

    NASA Technical Reports Server (NTRS)

    Osborn, D. E.; Lynch, D. C.; Fozzolari, R.

    1991-01-01

    A technique for photo generation of radicals is discussed that can be used in the recovery of oxygen and metals from extraterrestrial resources. The concept behind this work was to examine methods whereby radicals can be generated and used in the processing of refractory materials. In that regard, the focus is on the use of sunlight. Sunlight provides useful energy for processing in the forms of both thermal and quantum energy. A number of experiments were conducted in the chlorination of metals with and without the aid of UV and near UV light. The results of some of those experiments are discussed.

  2. Surface Analysis of LDEF Materials

    NASA Technical Reports Server (NTRS)

    Wightman, J. P. (Principal Investigator)

    1996-01-01

    The abstract to the M.S. thesis included as appendix to this report contains the details of the research performed under this grant. Presentations and publications resulting from the research are listed as the main content of the report itself. The thesis describes the surface characterization procedures and analysis of materials flown in the NASA Long Duration Exposure Facility (LDEF).

  3. Modeling the Nonlinear, Strain Rate Dependent Deformation of Shuttle Leading Edge Materials with Hydrostatic Stress Effects Included

    NASA Technical Reports Server (NTRS)

    Goldberg, Robert K.; Carney, Kelly S.

    2004-01-01

    An analysis method based on a deformation (as opposed to damage) approach has been developed to model the strain rate dependent, nonlinear deformation of woven ceramic matrix composites, such as the Reinforced Carbon Carbon (RCC) material used on the leading edges of the Space Shuttle. In the developed model, the differences in the tension and compression deformation behaviors have also been accounted for. State variable viscoplastic equations originally developed for metals have been modified to analyze the ceramic matrix composites. To account for the tension/compression asymmetry in the material, the effective stress and effective inelastic strain definitions have been modified. The equations have also been modified to account for the fact that in an orthotropic composite the in-plane shear response is independent of the stiffness in the normal directions. The developed equations have been implemented into LS-DYNA through the use of user defined subroutines (UMATs). Several sample qualitative calculations have been conducted, which demonstrate the ability of the model to qualitatively capture the features of the deformation response present in woven ceramic matrix composites.

  4. Effect of available entrainable material on a viscous gravity current including run-out characteristics and internal flow properties

    NASA Astrophysics Data System (ADS)

    Bates, Belinda; Ancey, Christophe

    2013-04-01

    It has long been accepted that entrainment of loose material by geophysical gravity flows such as dense snow avalanches and debris flows may change their behaviour significantly. Run-out distances and bulk-flow velocities are notable examples of susceptible behaviours. It is still disputed how this has an effect but it has been noted that the availability of entrainable material is a principal parameter. Laboratory and numerical results are studied side-by-side to demonstrate the effects of a finite erodible bed of varying length and depth, which is placed in the path of a flowing gravity current. Both the current and the bed are composed of the same material. Natural geophysical flows are simulated as idealized viscous gravity currents at zero degrees inclination in order to study the link between the internal dynamics and the bulk features in the simplest case. In the laboratory, a PIV configuration using a laser sheet allows the visualization of a vertical stream-wise cross section of the flow in the transition region from rigid to erodible bed, far from the side-walls. This allows the study of the velocity field within the cross-section of the flow in the entrainable region. Run-out speeds and distances are measured after the current exits the erodible bed and flows over a rigid base once more. A relationship is sought between the released volume, the erodible bed dimensions (that is, length and depth) and the run-out characteristics of the flow. This bulk run-out behaviour is investigated with reference to the internal flow dynamics as measured by PIV. This work is supplemented by results obtained modelling the same system using the open source CFD software OpenFOAM. We were able to track the front of the current during the flow and found that even the presence of a shallow entrainable bed (3 mm deep) significantly advanced the run-out front compared to the no-bed case. A further increase in bed depth led to a slight increase in run-out. The length of the bed was also a strongly controlling parameter, highlighting the change in flow characteristics across this region, and underlining the necessity to investigate the internal dynamics when a gravity current flows over an entrainable bed.

  5. Superhard composite materials including compounds of carbon and nitrogen deposited on metal and metal nitride, carbide and carbonitride

    DOEpatents

    Wong, M.S.; Li, D.; Chung, Y.W.; Sproul, W.D.; Chu, X.; Barnett, S.A.

    1998-07-07

    A composite material having high hardness comprises a carbon nitrogen compound, such as CN{sub x} where x is greater than 0.1 and up to 1.33, deposited on a metal or metal compound selected to promote deposition of substantially crystalline CN{sub x}. The carbon nitrogen compound is deposited on a crystal plane of the metal or metal compound sufficiently lattice-matched with a crystal plane of the carbon nitrogen compound that the carbon nitrogen compound is substantially crystalline. A plurality of layers of the compounds can be formed in alternating sequence to provide a multi-layered, superlattice coating having a coating hardness in the range of 45--55 GPa, which corresponds to the hardness of a BN coating and approaches that of a diamond coating. 10 figs.

  6. Superhard composite materials including compounds of carbon and nitrogen deposited on metal and metal nitride carbide and carbonitride

    DOEpatents

    Wong, M.S.; Li, D.; Chung, Y.W.; Sproul, W.D.; Xi Chu; Barnett, S.A.

    1998-03-10

    A composite material having high hardness comprises a carbon nitrogen compound, such as CN{sub x} where x is greater than 0.1 and up to 1.33, deposited on a metal or metal compound selected to promote deposition of substantially crystalline CN{sub x}. The carbon nitrogen compound is deposited on a crystal plane of the metal or metal compound sufficiently lattice-matched with a crystal plane of the carbon nitrogen compound that the carbon nitrogen compound is substantially crystalline. A plurality of layers of the compounds can be formed in alternating sequence to provide a multi-layered, superlattice coating having a coating hardness in the range of 45--55 GPa, which corresponds to the hardness of a BN coating and approaches that of a diamond coating. 10 figs.

  7. Superhard composite materials including compounds of carbon and nitrogen deposited on metal and metal nitride, carbide and carbonitride

    DOEpatents

    Wong, Ming-Show (Northbrook, IL); Li, Dong (Evanston, IL); Chung, Yip-Wah (Wilmette, IL); Sproul, William D. (Palantine, IL); Chu, Xi (Evanston, IL); Barnett, Scott A. (Evanston, IL)

    1998-01-01

    A composite material having high hardness comprises a carbon nitrogen compound, such as CN.sub.x where x is greater than 0.1 and up to 1.33, deposited on a metal or metal compound selected to promote deposition of substantially crystalline CN.sub.x. The carbon nitrogen compound is deposited on a crystal plane of the metal or metal compound sufficiently lattice-matched with a crystal plane of the carbon nitrogen compound that the carbon nitrogen compound is substantially crystalline. A plurality of layers of the compounds can be formed in alternating sequence to provide a multi-layered, superlattice coating having a coating hardness in the range of 45-55 GPa, which corresponds to the hardness of a BN coating and approaches that of a diamond coating.

  8. Superhard composite materials including compounds of carbon and nitrogen deposited on metal and metal nitride carbide and carbonitride

    DOEpatents

    Wong, Ming-Show (Northbrook, IL); Li, Dong (Evanston, IL); Chung, Yin-Wah (Wilmette, IL); Sproul, William D. (Palantine, IL); Chu, Xi (Evanston, IL); Barnett, Scott A. (Evanston, IL)

    1998-01-01

    A composite material having high hardness comprises a carbon nitrogen compound, such as CN.sub.x where x is greater than 0.1 and up to 1.33, deposited on a metal or metal compound selected to promote deposition of substantially crystalline CN.sub.x. The carbon nitrogen compound is deposited on a crystal plane of the metal or metal compound sufficiently lattice-matched with a crystal plane of the carbon nitrogen compound that the carbon nitrogen compound is substantially crystalline. A plurality of layers of the compounds can be formed in alternating sequence to provide a multi-layered, superlattice coating having a coating hardness in the range of 45-55 GPa, which corresponds to the hardness of a BN coating and approaches that of a diamond coating.

  9. Engineering Analysis of Intermediate Loop and Process Heat Exchanger Requirements to Include Configuration Analysis and Materials Needs

    SciTech Connect

    T.M. Lillo; R.L. Williamson; T.R. Reed; C.B. Davis; D.M. Ginosar

    2005-09-01

    The need to locate advanced hydrogen production facilities a finite distance away from a nuclear power source necessitates the need for an intermediate heat transport loop (IHTL). This IHTL must not only efficiently transport energy over distances up to 500 meters but must also be capable of operating at high temperatures (>850oC) for many years. High temperature, long term operation raises concerns of material strength, creep resistance and general material stability (corrosion resistance). IHTL design is currently in the initial stages. Many questions remain to be answered before intelligent design can begin. The report begins to look at some of the issues surrounding the main components of an IHTL. Specifically, a stress analysis of a compact heat exchanger design under expected operating conditions is reported. Also the results of a thermal analysis performed on two ITHL pipe configurations for different heat transport fluids are presented. The configurations consist of separate hot supply and cold return legs as well as annular design in which the hot fluid is carried in an inner pipe and the cold return fluids travels in the opposite direction in the annular space around the hot pipe. The effects of insulation configurations on pipe configuration performance are also reported. Finally, a simple analysis of two different process heat exchanger designs, one a tube in shell type and the other a compact or microchannel reactor are evaluated in light of catalyst requirements. Important insights into the critical areas of research and development are gained from these analyses, guiding the direction of future areas of research.

  10. DEVELOPMENT OF PLASTICITY MODEL USING NON ASSOCIATED FLOW RULE FOR HCP MATERIALS INCLUDING ZIRCONIUM FOR NUCLEAR APPLICATIONS

    SciTech Connect

    Michael V. Glazoff; Jeong-Whan Yoon

    2013-08-01

    In this report (prepared in collaboration with Prof. Jeong Whan Yoon, Deakin University, Melbourne, Australia) a research effort was made to develop a non associated flow rule for zirconium. Since Zr is a hexagonally close packed (hcp) material, it is impossible to describe its plastic response under arbitrary loading conditions with any associated flow rule (e.g. von Mises). As a result of strong tension compression asymmetry of the yield stress and anisotropy, zirconium displays plastic behavior that requires a more sophisticated approach. Consequently, a new general asymmetric yield function has been developed which accommodates mathematically the four directional anisotropies along 0 degrees, 45 degrees, 90 degrees, and biaxial, under tension and compression. Stress anisotropy has been completely decoupled from the r value by using non associated flow plasticity, where yield function and plastic potential have been treated separately to take care of stress and r value directionalities, respectively. This theoretical development has been verified using Zr alloys at room temperature as an example as these materials have very strong SD (Strength Differential) effect. The proposed yield function reasonably well models the evolution of yield surfaces for a zirconium clock rolled plate during in plane and through thickness compression. It has been found that this function can predict both tension and compression asymmetry mathematically without any numerical tolerance and shows the significant improvement compared to any reported functions. Finally, in the end of the report, a program of further research is outlined aimed at constructing tensorial relationships for the temperature and fluence dependent creep surfaces for Zr, Zircaloy 2, and Zircaloy 4.

  11. 10 CFR Appendix A to Subpart A of... - Format for Presentation of Material in Environmental Impact Statements

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 40 CFR 1502.20 and 1508.28 and 40 CFR 1502.21 1 of CEQ's NEPA regulations may be used as appropriate... outlined in 40 CFR 1506.3 2 of CEQ's NEPA regulations. In final environmental impact statements, material... these format headings may extend to 300 pages. 1 Tiering—40 CFR 1502.20, 40 CFR 1508.28;...

  12. 10 CFR Appendix A to Subpart A of... - Format for Presentation of Material in Environmental Impact Statements

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 40 CFR 1502.20 and 1508.28 and 40 CFR 1502.21 1 of CEQ's NEPA regulations may be used as appropriate... outlined in 40 CFR 1506.3 2 of CEQ's NEPA regulations. In final environmental impact statements, material... these format headings may extend to 300 pages. 1 Tiering—40 CFR 1502.20, 40 CFR 1508.28;...

  13. 10 CFR Appendix A to Subpart A of... - Format for Presentation of Material in Environmental Impact Statements

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 40 CFR 1502.20 and 1508.28 and 40 CFR 1502.21 1 of CEQ's NEPA regulations may be used as appropriate... outlined in 40 CFR 1506.3 2 of CEQ's NEPA regulations. In final environmental impact statements, material... these format headings may extend to 300 pages. 1 Tiering—40 CFR 1502.20, 40 CFR 1508.28;...

  14. 10 CFR Appendix A to Subpart A of... - Format for Presentation of Material in Environmental Impact Statements

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 40 CFR 1502.20 and 1508.28 and 40 CFR 1502.21 1 of CEQ's NEPA regulations may be used as appropriate... outlined in 40 CFR 1506.3 2 of CEQ's NEPA regulations. In final environmental impact statements, material... these format headings may extend to 300 pages. 1 Tiering—40 CFR 1502.20, 40 CFR 1508.28;...

  15. 49 CFR Appendix D to Part 178 - Thermal Resistance Test

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Thermal Resistance Test D Appendix D to Part 178 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR PACKAGINGS Pt. 178, App. D Appendix D to Part...

  16. 49 CFR Appendix A to Part 173 - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false A Appendix A to Part 173 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Appendix A to Part...

  17. Hazardous-materials car placement in a train consist. Volume 2. Appendices. Final report, 18 Feb-17 Nov 88

    SciTech Connect

    Thompson, R.E.; Zamejc, E.R.; Ahlbeck, D.R.

    1992-06-01

    Appendices, Volume II consist of Appendix A. Form FRA F6180-54 (12-74) Rail Equipment Accident/Incident Report; Appendix B. Data Related to Derailment Analysis; Appendix C. Review of Selected Railroad Accidents Involving Multiple Hazardous Materials; Appendix D. U.S. Department of Transportation Hazmat Car Placement Regulations; Appendix E. Canadian Transport Commission Hazmat Car Placement Regulations; Appendix F. Hazardous Materials Definitions; Appendix G. Table of Position in Train Requirements; Appendix H. Chemical Reactivities of Binary Combinations; Appendix I. Results from the Consequence Calculations; Appendix J. Consequence and Risk Rankings of Incompatible Chemical Combinations.

  18. Construction safety program for the National Ignition Facility, Appendix A

    SciTech Connect

    Cerruti, S.J.

    1997-06-26

    Topics covered in this appendix include: General Rules-Code of Safe Practices; 2. Personal Protective Equipment; Hazardous Material Control; Traffic Control; Fire Prevention; Sanitation and First Aid; Confined Space Safety Requirements; Ladders and Stairways; Scaffolding and Lift Safety; Machinery, Vehicles, and Heavy Equipment; Welding and Cutting-General; Arc Welding; Oxygen/Acetylene Welding and Cutting; Excavation, Trenching, and Shoring; Fall Protection; Steel Erection; Working With Asbestos; Radiation Safety; Hand Tools; Electrical Safety; Nonelectrical Work Performed Near Exposed High-Voltage Power-Distribution Equipment; Lockout/Tagout Requirements; Rigging; A-Cranes; Housekeeping; Material Handling and Storage; Lead; Concrete and Masonry Construction.

  19. Continuing German in Grade Five: MLA Teacher's Guide. A Course of Study Including Methods, Materials, and Aids for Teaching German to Fifth-Grade Pupils.

    ERIC Educational Resources Information Center

    Memming, Agnes K.; And Others

    This teacher's guide, for use in a fifth-grade German course, contains 12 units of instructional materials which concentrate on the development of basic audiolingual skills. Each of the units consists of conversational skits, dialogue adaptation, directed dialogue review, and classroom drills. Units include: (1) Das Aufstehen und das Fruhstuck,…

  20. Application Of A New Semi-Empirical Model For Forming Limit Prediction Of Sheet Material Including Superposed Loads Of Bending And Shearing

    NASA Astrophysics Data System (ADS)

    Held, Christian; Liewald, Mathias; Schleich, Ralf; Sindel, Manfred

    2010-06-01

    The use of lightweight materials offers substantial strength and weight advantages in car body design. Unfortunately such kinds of sheet material are more susceptible to wrinkling, spring back and fracture during press shop operations. For characterization of capability of sheet material dedicated to deep drawing processes in the automotive industry, mainly Forming Limit Diagrams (FLD) are used. However, new investigations at the Institute for Metal Forming Technology have shown that High Strength Steel Sheet Material and Aluminum Alloys show increased formability in case of bending loads are superposed to stretching loads. Likewise, by superposing shearing on in plane uniaxial or biaxial tension formability changes because of materials crystallographic texture. Such mixed stress and strain conditions including bending and shearing effects can occur in deep-drawing processes of complex car body parts as well as subsequent forming operations like flanging. But changes in formability cannot be described by using the conventional FLC. Hence, for purpose of improvement of failure prediction in numerical simulation codes significant failure criteria for these strain conditions are missing. Considering such aspects in defining suitable failure criteria which is easy to implement into FEA a new semi-empirical model has been developed considering the effect of bending and shearing in sheet metals formability. This failure criterion consists of the combination of the so called cFLC (combined Forming Limit Curve), which considers superposed bending load conditions and the SFLC (Shear Forming Limit Curve), which again includes the effect of shearing on sheet metal's formability.

  1. Application Of A New Semi-Empirical Model For Forming Limit Prediction Of Sheet Material Including Superposed Loads Of Bending And Shearing

    SciTech Connect

    Held, Christian; Liewald, Mathias; Schleich, Ralf; Sindel, Manfred

    2010-06-15

    The use of lightweight materials offers substantial strength and weight advantages in car body design. Unfortunately such kinds of sheet material are more susceptible to wrinkling, spring back and fracture during press shop operations. For characterization of capability of sheet material dedicated to deep drawing processes in the automotive industry, mainly Forming Limit Diagrams (FLD) are used. However, new investigations at the Institute for Metal Forming Technology have shown that High Strength Steel Sheet Material and Aluminum Alloys show increased formability in case of bending loads are superposed to stretching loads. Likewise, by superposing shearing on in plane uniaxial or biaxial tension formability changes because of materials crystallographic texture. Such mixed stress and strain conditions including bending and shearing effects can occur in deep-drawing processes of complex car body parts as well as subsequent forming operations like flanging. But changes in formability cannot be described by using the conventional FLC. Hence, for purpose of improvement of failure prediction in numerical simulation codes significant failure criteria for these strain conditions are missing. Considering such aspects in defining suitable failure criteria which is easy to implement into FEA a new semi-empirical model has been developed considering the effect of bending and shearing in sheet metals formability. This failure criterion consists of the combination of the so called cFLC (combined Forming Limit Curve), which considers superposed bending load conditions and the SFLC (Shear Forming Limit Curve), which again includes the effect of shearing on sheet metal's formability.

  2. 49 CFR Appendix B to Part 194 - High Volume Areas

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false High Volume Areas B Appendix B to Part 194 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY RESPONSE PLANS FOR ONSHORE OIL PIPELINES Pt. 194, App. B Appendix B...

  3. 49 CFR Appendixes E-G to Part 173 - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false E Appendixes E-G to Part 173 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF... Appendixes E-G to Part 173...

  4. 49 CFR Appendixes E-G to Part 173 - [Reserved

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false E Appendixes E-G to Part 173 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF... Appendixes E-G to Part 173...

  5. 46 CFR Appendix I to Part 153 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false I Appendix I to Part 153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Appendix I to Part 153...

  6. 40 CFR Appendix IV to Part 261 - Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Reserved IV Appendix IV to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION... Materials Wording of the instruments. Appendix IV to Part 261...

  7. 40 CFR Appendix IV to Part 261 - Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Reserved IV Appendix IV to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION... Materials Wording of the instruments. Appendix IV to Part 261...

  8. 40 CFR Appendix B to Subpart E of... - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false B Appendix B to Subpart E of Part 763 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools Appendix B to Subpart E of Part 763...

  9. 40 CFR Appendix B to Subpart E of... - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false B Appendix B to Subpart E of Part 763 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools Appendix B to Subpart E of Part 763...

  10. 40 CFR Appendix B to Subpart E of... - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false B Appendix B to Subpart E of Part 763 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools Appendix B to Subpart E of Part 763...

  11. 40 CFR Appendix B to Subpart E of... - [Reserved

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false B Appendix B to Subpart E of Part 763 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools Appendix B to Subpart E of Part 763...

  12. 40 CFR Appendix B to Subpart E of... - [Reserved

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false B Appendix B to Subpart E of Part 763 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools Appendix B to Subpart E of Part 763...

  13. 49 CFR Appendixes E-G to Part 173 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false E Appendixes E-G to Part 173 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF... Appendixes E-G to Part 173...

  14. 49 CFR Appendixes E-G to Part 173 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false E Appendixes E-G to Part 173 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF... Appendixes E-G to Part 173...

  15. 40 CFR Appendix V to Part 261 - Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Reserved V Appendix V to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION... Materials Wording of the instruments. Appendix V to Part 261...

  16. 40 CFR Appendix V to Part 261 - Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Reserved V Appendix V to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION... Materials Wording of the instruments. Appendix V to Part 261...

  17. 40 CFR Appendix V to Part 261 - Reserved

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 27 2013-07-01 2013-07-01 false Reserved V Appendix V to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION... Materials Wording of the instruments. Appendix V to Part 261...

  18. 40 CFR Appendix V to Part 261 - Reserved

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Reserved V Appendix V to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION... Materials Wording of the instruments. Appendix V to Part 261...

  19. 40 CFR Appendix V to Part 261 - Reserved

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 27 2012-07-01 2012-07-01 false Reserved V Appendix V to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION... Materials Wording of the instruments. Appendix V to Part 261...

  20. 46 CFR Appendix I to Part 153 - [Reserved

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false I Appendix I to Part 153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Appendix I to Part...

  1. 46 CFR Appendix I to Part 153 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false I Appendix I to Part 153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Appendix I to Part 153...

  2. 12 CFR Appendix B to Part 1026 - State Exemptions

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... on Disclosure of Records and Information (12 CFR Part 1070), all applications made, including any... 12 Banks and Banking 9 2014-01-01 2014-01-01 false State Exemptions B Appendix B to Part 1026.... B Appendix B to Part 1026—State Exemptions Application Any state may apply to the Bureau for...

  3. 12 CFR Appendix B to Part 1026 - State Exemptions

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... on Disclosure of Records and Information (12 CFR part 1070), all applications made, including any... 12 Banks and Banking 8 2013-01-01 2013-01-01 false State Exemptions B Appendix B to Part 1026.... B Appendix B to Part 1026—State Exemptions Application Any state may apply to the Bureau for...

  4. 12 CFR Appendix B to Part 1026 - State Exemptions

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... on Disclosure of Records and Information (12 CFR Part 1070), all applications made, including any... 12 Banks and Banking 8 2012-01-01 2012-01-01 false State Exemptions B Appendix B to Part 1026.... B Appendix B to Part 1026—State Exemptions Application Any state may apply to the Bureau for...

  5. 7 CFR Appendix to Subpart F of... - Unknown Title

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 1 2011-01-01 2011-01-01 false Appendix to Subpart F of Part 15a Agriculture Office of the Secretary of Agriculture EDUCATION PROGRAMS OR ACTIVITIES RECEIVING OR BENEFITTING FROM FEDERAL FINANCIAL ASSISTANCE Procedures (Interim) Pt. 15a, Subpt. F, App. Appendix to Subpart F of Part 15a Programs covered by Title IX include, but...

  6. 7 CFR Appendix to Subpart F of... - Unknown Title

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 1 2014-01-01 2014-01-01 false Appendix to Subpart F of Part 15a Agriculture Office of the Secretary of Agriculture EDUCATION PROGRAMS OR ACTIVITIES RECEIVING OR BENEFITTING FROM FEDERAL FINANCIAL ASSISTANCE Procedures (Interim) Pt. 15a, Subpt. F, App. Appendix to Subpart F of Part 15a Programs covered by Title IX include, but...

  7. 7 CFR Appendix to Subpart F of... - Unknown Title

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 1 2013-01-01 2013-01-01 false Appendix to Subpart F of Part 15a Agriculture Office of the Secretary of Agriculture EDUCATION PROGRAMS OR ACTIVITIES RECEIVING OR BENEFITTING FROM FEDERAL FINANCIAL ASSISTANCE Procedures (Interim) Pt. 15a, Subpt. F, App. Appendix to Subpart F of Part 15a Programs covered by Title IX include, but...

  8. 32 CFR Appendix D to Part 290 - Audit Working Papers

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 2 2013-07-01 2013-07-01 false Audit Working Papers D Appendix D to Part 290.... 290, App. D Appendix D to Part 290—Audit Working Papers (a) Definition (1) Audit working papers... interviews and inquiries, and other available sources. Audit working papers may also include contract...

  9. 32 CFR Appendix D to Part 290 - Audit Working Papers

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Audit Working Papers D Appendix D to Part 290.... 290, App. D Appendix D to Part 290—Audit Working Papers (a) Definition (1) Audit working papers... interviews and inquiries, and other available sources. Audit working papers may also include contract...

  10. 32 CFR Appendix D to Part 290 - Audit Working Papers

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 2 2011-07-01 2011-07-01 false Audit Working Papers D Appendix D to Part 290.... 290, App. D Appendix D to Part 290—Audit Working Papers (a) Definition (1) Audit working papers... interviews and inquiries, and other available sources. Audit working papers may also include contract...

  11. 32 CFR Appendix D to Part 290 - Audit Working Papers

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 2 2014-07-01 2014-07-01 false Audit Working Papers D Appendix D to Part 290.... 290, App. D Appendix D to Part 290—Audit Working Papers (a) Definition (1) Audit working papers... interviews and inquiries, and other available sources. Audit working papers may also include contract...

  12. 32 CFR Appendix D to Part 290 - Audit Working Papers

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 2 2012-07-01 2012-07-01 false Audit Working Papers D Appendix D to Part 290.... 290, App. D Appendix D to Part 290—Audit Working Papers (a) Definition (1) Audit working papers... interviews and inquiries, and other available sources. Audit working papers may also include contract...

  13. 7 CFR Appendix to Subpart F of... - Unknown Title

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Appendix to Subpart F of Part 15a Agriculture Office of the Secretary of Agriculture EDUCATION PROGRAMS OR ACTIVITIES RECEIVING OR BENEFITTING FROM FEDERAL FINANCIAL ASSISTANCE Procedures (Interim) Pt. 15a, Subpt. F, App. Appendix to Subpart F of Part 15a Programs covered by Title IX include, but...

  14. 32 CFR Appendix A to Part 155 - Additional Procedural Guidance

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... INDUSTRIAL PERSONNEL SECURITY CLEARANCE PROGRAM Pt. 155, App. A Appendix A to Part 155—Additional Procedural... material evidence may be received subject to rebuttal, and technical rules of evidence may be...

  15. Station for X-ray structural analysis of materials and single crystals (including nanocrystals) on a synchrotron radiation beam from the wiggler at the Siberia-2 storage ring

    SciTech Connect

    Kheiker, D. M. Kovalchuk, M. V.; Korchuganov, V. N.; Shilin, Yu. N.; Shishkov, V. A.; Sulyanov, S. N.; Dorovatovskii, P. V.; Rubinsky, S. V.; Rusakov, A. A.

    2007-11-15

    The design of the station for structural analysis of polycrystalline materials and single crystals (including nanoobjects and macromolecular crystals) on a synchrotron radiation beam from the superconducting wiggler of the Siberia-2 storage ring is described. The wiggler is constructed at the Budker Institute of Nuclear Physics of the Siberian Division of the Russian Academy of Sciences. The X-ray optical scheme of the station involves a (1, -1) double-crystal monochromator with a fixed position of the monochromatic beam and a sagittal bending of the second crystal, segmented mirrors bent by piezoelectric motors, and a (2{theta}, {omega}, {phi}) three-circle goniometer with a fixed tilt angle. Almost all devices of the station are designed and fabricated at the Shubnikov Institute of Crystallography of the Russian Academy of Sciences. The Bruker APEX11 two-dimensional CCD detector will serve as a detector in the station.

  16. Appendix G: Geochemistry

    SciTech Connect

    Cantrell, Kirk J.; Serne, R. Jeffrey; Zachara, John M.; Krupka, Kenneth M.; Dresel, P. Evan; Brown, Christopher F.; Freshley, Mark D.

    2008-01-17

    This appendix discusses the geology of the Hanford Site and singe-shell tank (SST) waste management areas (WMAs). The purpose is to provide the most recent geochemical information available for the SST WMAs and the Integrated Disposal Facility. This appendix summarizes the information in the geochemistry data package for the SST WMAs.

  17. Weightless Environment Training Facility (WETF) materials coating evaluation, volume 3

    NASA Technical Reports Server (NTRS)

    1995-01-01

    This volume consists of Appendices C, D, E, and F to the report on the Weightless Environment Training Facility Materials Coating Evaluation project. The project selected 10 coating systems to be evaluated in six separate exposure environments, and subject to three tests for physical properties. Appendix C is the photographic appendix of the test panels. Appendix D details methods and procedures. Appendix E lists application equipment costs. Appendix F is a compilation of the solicitation of the candidate coating systems.

  18. Applying a new procedure to assess the controls on aggregate stability - including soil parent material and soil organic carbon concentrations - at the landscape scale

    NASA Astrophysics Data System (ADS)

    Turner, Gren; Rawlins, Barry; Wragg, Joanna; Lark, Murray

    2014-05-01

    Aggregate stability is an important physical indicator of soil quality and influences the potential for erosive losses from the landscape, so methods are required to measure it rapidly and cost-effectively. Previously we demonstrated a novel method for quantifying the stability of soil aggregates using a laser granulometer (Rawlins et al., 2012). We have developed our method further to mimic field conditions more closely by incorporating a procedure for pre-wetting aggregates (for 30 minutes on a filter paper) prior to applying the test. The first measurement of particle-size distribution is made on the water stable aggregates after these have been added to circulating water (aggregate size range 1000 to 2000 ”m). The second measurement is made on the disaggregated material after the circulating aggregates have been disrupted with ultrasound (sonication). We then compute the difference between the mean weight diameters (MWD) of these two size distributions; we refer to this value as the disaggregation reduction (DR; ”m). Soils with more stable aggregates, which are resistant to both slaking and mechanical breakdown by the hydrodynamic forces during circulation, have larger values of DR. We made repeated analyses of DR using an aggregate reference material (RM; a paleosol with well-characterised disaggregation properties) and used this throughout our analyses to demonstrate our approach was reproducible. We applied our modified technique - and also the previous technique in which dry aggregates were used - to a set of 60 topsoil samples (depth 0-15 cm) from cultivated land across a large region (10 000 km2) of eastern England. We wished to investigate: (i) any differences in aggregate stability (DR measurements) using dry or pre-wet aggregates, and (ii) the dominant controls on the stability of aggregates in water using wet aggregates, including variations in mineralogy and soil organic carbon (SOC) content, and any interaction between them. The sixty soil sampling locations were selected based on the quantities of SOC from previous analysis (on samples collected at sites across the entire region). We chose the samples to encompass a wide range of SOC concentrations (1.2-7%) within each of six strongly contrasting soil parent material (PM) groups (sandstone, mudstone, clay, chalk, limestone and marine alluvium). The DR values (calculated using re-scaled size distributions for particle diameters < 500 ”m) ranged from 17 to 151 ”m. The co-efficient of variation for DR analyses using fourteen aliquots of the RM was reasonably small (21 %). The PM groups accounted for a larger proportion of the variation in DR than SOC concentrations; together they accounted for around 50% of the variation in DR values. There was no evidence to include an interaction term between PM and SOC concentration. The proportion of clay-sized particles in the material after sonication was not a statistically significant predictor of DR. Pre-wetting the aggregates typically resulted in substantially smaller values of DR by comparison to using air-dried aggregates in our test. We suggest that the effects of differential clay swelling as a disruptive force during the wetting stage are greater than those associated with slaking (fragmentation due to trapped air). We believe this rapid (duration after the wetting procedure is 10 minutes), reproducible test could could be an effective means to monitor changes in this important soil property and improve predictions of soil erosion. Reference: Rawlins, B. G., Wragg, J. & Lark, R. M. 2012. Application of a novel method for soil aggregate stability measurement by laser granulometry with sonication. European Journal of Soil Science, 64, 92-103.

  19. 10 CFR Appendix C to Part 835 - Derived Air Concentration (DAC) for Workers From External Exposure During Immersion in a Cloud of...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Exposure During Immersion in a Cloud of Airborne Radioactive Material C Appendix C to Part 835 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Pt. 835, App. C Appendix C to Part 835—Derived Air... Material a. The data presented in appendix C are to be used for controlling occupational exposures...

  20. Planning Schools for Use of Audio-Visual Materials. No. 3: The Audio-Visual Materials Center.

    ERIC Educational Resources Information Center

    National Education Association, Washington, DC. Dept. of Audiovisual Instruction.

    This manual discusses the role, organizational patterns, expected services, and space and housing needs of the audio-visual instructional materials center. In considering the housing of basic functions, photographs, floor layouts, diagrams, and specifications of equipment are presented. An appendix includes a 77-item bibliography, a 7-page list of…

  1. Materials problems in fluidized-bed combustion systems. Appendix 3. Evaluation of boiler alloy specimens at Foster Wheeler Development Corporation. Final report

    SciTech Connect

    Amoruso, G.V.; Apblett, A.R. Jr.

    1980-05-01

    This report summarizes the results of the Foster Wheeler Development Corporation (FWDC) portion of a metallurgical investigation conducted to assess the corrosion behavior of various ferritic, austenitic, and nickel-base alloys which were exposed in a coal-burning fluidized bed test facility at nominal temperatures of 1000/sup 0/F, 1200/sup 0/F, 1400/sup 0/F, 1550/sup 0/F, and 1650/sup 0/F for 1000 and 2000 hour test exposure periods. The alloys included Corten, 2-1/4Cr-1Mo, 9Cr-1Mo, 405 SS, E-Brite 26-1, 310 SS, 329 SS, 347 SS, 22-13-5, 21-6-9, Incoloy 800, Manaurite 36X, Inconel 690, and RA 333. The investigation included material precharacterization studies and post-test metallurgical evaluations involving deposit/scale thickness measurements, selective chemical/microprobe analyses, specimen surface recession measurements, determination of depths of dealloying and corrosive constituent penetrations, grain-size determinations, hardness surveys, macro and microscopic examinations and study/recording of microstructural changes resulting as a consequence of test exposure.

  2. Research on materials for advanced electronic and aerospace application. [including optical and magnetic data processing, stress corrosion and H2 interaction, and polymeric systems

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Development and understanding of materials most suitable for use in compact magnetic and optical memory systems are discussed. Suppression of metal deterioration by hydrogen is studied. Improvement of mechanical properties of polymers is considered, emphasizing low temperature ductility and compatibility with high modulus fiber materials.

  3. A reevaluation of the lineage development of Pararotalia and Praepararotalia including new material from the Rupelian of the southern Upper Rhine Graben

    NASA Astrophysics Data System (ADS)

    Pirkenseer, C.; Spezzaferri, S.

    2009-04-01

    The lineage of the benthic Foraminifera Praepararotalia and Pararotalia has a known record since the Late Cretaceous to recent. Showing a wide range of morphologic variations, the most recent thorough generic definition of Pararotalia is heavily based on internal structures (e.g., HOTTINGER et al. 1991). Thus many of the older, not revised species are still assigned to Pararotalia by means of visible external structures. This applies also to the genus Praepararotalia (Cretaceous to Late Eocene), erected by LIU et al. (1998) as a "simple" predecessor-taxon with generally round, smooth to pustulated chambers of slowly increasing diameter, very low to flat spiral side and small overall size. Wall texture and aperture are identical in both genera. According to LIU et al. (1998) Pararotalia s.str. is characterized by a general size increase, planoconvex test, the development of peripheral pseudospines, keel and increasingly conical chambers ("angular" habitus) as well as a distinct umbilical sutures and plug. Pararotalia macneilli (Danian) and P. ishamae (Thanetian) are considered to represent linking species, the main difference being the initial development of an umbilical plug. The separation of the two genera took place in the Late Cretaceous or Earliest Paleogene, with Praepararotalia cretacea being the ancestral species (LIU et al. 1998). We present here a reevaluation of the morphogroups based on material from the Rupelian of the southern Upper Rhine Graben and the analysis of the record of reported species from literature. Four different groups can be separated in terms of external morphology. The first group represents the Praepararotalia-habitus of small size. New material from the Rupelian of the southern Upper Rhine Graben may be attributed to this group. It differs in a higher number of chambers in the last whorl and total chamber numbers (5-6 vs. 6-7, 11-16 vs. up to 22), a much larger size (up to 500”m) and a higher trochospire. Some specimens show a more rapid increase of chamber size. The necessity of a new genus is in discussion. The second group includes the small intermediate species as Pararotalia ishamae, characterized by inflated globular chambers, a general absence of a keel, partial development of small pseudospines and umbilical plugs. This group can be traced up to recent, as is indicated by the occurrence of small sized Pararotalia cananeiaensis (DEBENAY et al. 2001). Material from the research area (PIRKENSEER 2007), though of generally larger size is attributed to the Rupelian P. curryi. It however shows variation in the development of pseudospines, the lateral profile and umbilicus. The latter species may be a synonym of the similar Late Eocene P. parva. The third group consists only of Pararotalia spinigera (Lutetian) and Pararotalia canui (Rupelian) with an inflated angular lateral profile and a relatively large size. Material from the research area attributed to P. canui shows massive well-developed peripheral pseudospines, a strong umbilical plug and a rounded keel. Double pseudospines occur sporadically. The apertural lip is heavily toothed. The fourth group consists of species with a very angular lateral profile, conical chambers, distinct umbilical plug and a moderate to very large size (up to 600”m), ranging from the Thanetian (Pararotalia minimalis) at least to the Pliocene (P. padana, MANCIN et al. 2000). This reevaluation indicates the perseverance of the "primitive" group of Pararotalia macneilli until today. It thus contradicts a gradual development of the genus Pararotalia to more spineous, angular and larger forms. The latter morphogroup exists well defined since the Paleocene with representatives throughout the Paleogene and Neogene. This study was partly funded by the Swiss National Science Foundation projects 109457 and 118025. References: DEBENAY, J. P., DULEBA, W., BONETTI, C., et al. (2001): Pararotalia cananeiaensis n. sp.: indicator of marine influence and water circulation in Brazilian coastal and paralic environments. - Journal of Foraminiferal Research, 31, 2: 152-163. HOTTINGER, L., HALICZ, E. & REISS, Z. (1991): The foraminiferal genera Pararotalia, Neorotalia, and Calcarina: taxonomic revision. - Journal of Paleontology, 65, 1: 18-33. LIU, C., OLSSON, R. K. & HUBERT, B. T. (1998): A benthic paleohabitat for Praepararotalia gen. nov. and Antarcticella Loeblich and Tappan. - Journal of Foraminiferal Research, 28, 1: 3-18. MANCIN, N., PIRINI, C. & LANFRANCHINI, P.L. (2000): New species of Pararotalia LE CALVEZ, in Pliocene sediments of the Lower Valsesia and Western Liguria. - Bollettina della Società Paleontologica Italiana, 39, 3: 341-350. PIRKENSEER, C. (2007): Foraminifera, Ostracoda and other microfossils of the Southern Upper Rhine Graben - Palaeoecology, biostratigraphy, palaeogeography and geodynamic implications. - PhD thesis: 340p, Fribourg.

  4. Total coliform rule: Implementation manual (including Appendix D). Final report

    SciTech Connect

    Not Available

    1990-03-08

    The purpose of the document is to provide guidance to EPA regions and the States on implementation of the rule. More specifically, the document addresses violation determination, FRDS reporting, and State Primacy Revision Application. The first section presents time lines showing deadlines for submission of Primacy Revision applications. The second section addresses violation determination and associated reporting requirements. The third section covers State Special Primacy Requirements. This section breaks the requirements down into three categories of relative importance. States may find this categorization useful in preparing their applications for primacy, because the EPA regions may utilize the categories in evaluating the applications.

  5. 12 CFR Appendix B to Part 748 - Guidance on Response Programs for Unauthorized Access to Member Information and Member Notice

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... See 12 CFR part 748, appendix A, Paragraph III.B. 2. Following the assessment of these risks, appendix..., including the systems maintained by its service providers. See 12 CFR part 748, appendix A, Paragraph I.C.2..., maintained by or on behalf of the credit union. 29 12 CFR part 748. A. Security Guidelines Section 501(b)...

  6. 12 CFR Appendix A to Part 208 - Capital Adequacy Guidelines for State Member Banks: Risk-Based Measure

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... appendix B of this part and in appendix B to part 225 of the Federal Reserve's Regulation Y, 12 CFR part... meet the criteria set forth in 12 CFR part 225, appendix B, also qualify as unlimited elements of Tier... assets. i. All servicing assets, including servicing assets on assets other than mortgages...

  7. Evaluation of flaws in ferritic piping: ASME Code Appendix J, Deformation Plasticity Failure Assessment Diagram (DPFAD)

    SciTech Connect

    Bloom, J.M. )

    1991-08-01

    This report summarizes the methods and bases used by an ASME Code procedure for the evaluation of flaws in ferritic piping. The procedure is currently under consideration by the ASME Boiler and Pressure Vessel Code Committee of Section 11. The procedure was initially proposed in 1985 for the evaluation of the acceptability of flaws detected in piping during in-service inspection for certain materials, identified in Article IWB-3640 of the ASME Boiler and Pressure Vessel Code Section 11 Rules for In-service Inspection of Nuclear Power Plant Components.'' for which the fracture toughness is not sufficiently high to justify acceptance based solely on the plastic limit load evaluation methodology of Appendix C and IWB-3641. The procedure, referred to as Appendix J, originally included two approaches: a J-integral based tearing instability (J-T) analysis and the deformation plasticity failure assessment diagram (DPFAD) methodology. In Appendix J, a general DPFAD approach was simplified for application to part-through wall flows in ferritic piping through the use of a single DPFAD curve for circumferential flaws. Axial flaws are handled using two DPFAD curves where the ratio of flaw depth to wall thickness is used to determine the appropriate DPFAD curve. Flaws are evaluated in Appendix J by comparing the actual pipe applied stress with the allowable stress with the appropriate safety factors for the flaw size at the end of the evaluation period. Assessment points for circumferential and axial flaws are plotted on the appropriate failure assessment diagram. In addition, this report summarizes the experimental test predictions of the results of the Battelle Columbus Laboratory experiments, the Eiber experiments, and the JAERI tests using the Appendix J DPFAD methodology. Lastly, this report also provides guidelines for handling residual stresses in the evaluation procedure. 22 refs., 13 figs., 5 tabs.

  8. 18 CFR 301.6 - Appendix 1 instructions.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... cost-of-service report along with an assurance statement that the information contained in the cost-of... revenue requirements. The Utility's Appendix filing must include details of the allocation. (2)...

  9. 40 CFR Appendix A to Part 272 - State Requirements

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... citations affecting appendix A to part 272, see the List of CFR Sections Affected, which appears in the... provisions include: Arkansas Department of Pollution Control and Ecology Regulation No. 23, Hazardous...

  10. 36 CFR Appendix A to Part 1275 - Settlement Agreement

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Recordings and Materials Preservation Act of 1974 (“the Act”), 44 U.S.C. § 2111 note, and defined in 36 CFR... NIXON PRESIDENTIAL MATERIALS PRESERVATION AND PROTECTION OF AND ACCESS TO THE PRESIDENTIAL HISTORICAL MATERIALS OF THE NIXON ADMINISTRATION Pt. 1275, App. A Appendix A to Part 1275—Settlement...

  11. Reading and the Kindergarten Child. Appendix.

    ERIC Educational Resources Information Center

    Clark County School District, Las Vegas, NV.

    GRADES OR AGES: Kindergarten. SUBJECT MATTER: Reading. ORGANIZATION AND PHYSICAL APPEARANCE: This document is the appendix of supplemental resources for use with the Kindergarten Reading Guide (SP 007 233). It has the following contents: Stage I which includes motor development, identification of self and surroundings, hand-eye and small muscle


  12. Strategic analysis for safeguards systems: a feasibility study. Volume 2. Appendix

    SciTech Connect

    Goldman, A J

    1984-12-01

    This appendix provides detailed information regarding game theory (strategic analysis) and its potential role in safeguards to supplement the main body of this report. In particualr, it includes an extensive, though not comprehensive review of literature on game theory and on other topics that relate to the formulation of a game-theoretic model (e.g. the payoff functions). The appendix describes the basic form and components of game theory models, and the solvability of various models. It then discusses three basic issues related to the use of strategic analysis in material accounting: (1) its understandability; (2) its viability in regulatory settings; and (3) difficulties in the use of mixed strategies. Each of the components of a game theoretic model are then discussed and related to the present context.

  13. Environmental quarterly: appendix

    SciTech Connect

    Not Available

    1980-10-01

    This report presents current information from the EML environmental programs, The Air Monitoring Section of the Bhabha Atomic Research Centre, India, the National Radiation Laboratory in New Zealand, and the Woods Hole Oceanographic Institution. The initial section consists of interpretive reports and notes dealing with /sup 90/Sr levels in food in India, /sup 90/Sr in human bone from San Francisco, the global deposition of /sup 90/Sr, origin and deposition history of trace elements and polycyclic aromatic hydrocarbons in Adirondack lakes, description of boat for taking lake sediment cores, interlaboratory comparison of chemical constituent analyses of deposition samples and quality control of halocarbon and nitrous oxide analyses of gas samples collected by aircraft. Subsequent sections include tabulations of /sup 90/Sr fallout, chemical constituents of wet and dry deposition, radionuclides and trace metal concentrations in surface air, and /sup 90/Sr concentrations in San Francisco and New York diet, milk and tapwater. A bibliography of recent publications related to environmental studies is also presented. This appendix contains the relevant data.

  14. The Accessibility of Learning Content for All Students, Including Students with Disabilities, Must Be Addressed in the Shift to Digital Instructional Materials. SETDA Policy Brief

    ERIC Educational Resources Information Center

    Fletcher, Geoff; Levin, Doug; Lipper, Katherine; Leichty, Reg

    2014-01-01

    This is a time of rapid technological advancement, with innovations in education holding great promise for improving teaching and learning, particularly for students with unique needs. High-quality digital educational materials, tools, and resources offer students relevant, up-to-date, and innovative ways to acquire knowledge and skills. Created…

  15. Analytical resolution of the reactive diffusion equation for transient electronics including materials whose porosity value changes in terms of their thickness

    NASA Astrophysics Data System (ADS)

    Vargas Toro, AgustĂ­n.

    2014-05-01

    Transient electronic devices are a new technology development whose main characteristic is that its components can disappear in a programmed and controlled way, which means such devices have a pre-engineered service life. Nowadays, transient electronics have a large application field, involving from the reduction of e-waste in the planet until the development of medical instruments and implants that can be discarded when the patients do not need it anymore, avoiding the trouble of having an extra procedure for them. These devices must be made from biocompatible materials avoiding long-term adverse effects in the environment and patients. It is fundamental to develop an analytical model that allows describing the behavior of these materials considering cases which its porosity may be constant or not, in presence of water or any other biofluid. In order to accomplish this analysis was solve the reactive diffusion equation based on Bromwich's integral and the Residue theorem for two material cases, those whose porosity is constant, and those whose porosity increases linearly in terms of its thickness, where was found a general expression. This allows to the analysis of the relation of the electric resistance (per unit length) and the rate of dissolution of the material.

  16. Synthesis Gas Demonstration Plant, Baskett, Kentucky: environmental report. [Contains chapter 4 and appendix 4A

    SciTech Connect

    1980-01-01

    This volume contains chapter 4 and Appendix 4A which include descriptions of use of adjacent land and water (within miles of the proposed site), baseline ecology, air quality, meteorology, noise, hydrology, water quality, geology, soils and socio-economic factors. Appendix 4A includes detailed ecological surveys made in the area including the methods used. (LTN)

  17. 10 CFR Appendix F to Part 73 - Nations That Are Parties to the Convention on the Physical Protection of Nuclear Material 1

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... to the Convention on the Physical Protection of Nuclear Material 1 1 An update list of party nations..., 1982. German Democratic Republic (E. Germany) Feb. 5, 1981. Guatemala Apr. 23, 1985. Hungary May...

  18. 10 CFR Appendix F to Part 73 - Nations That Are Parties to the Convention on the Physical Protection of Nuclear Material 1

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to the Convention on the Physical Protection of Nuclear Material 1 1 An update list of party nations..., 1982. German Democratic Republic (E. Germany) Feb. 5, 1981. Guatemala Apr. 23, 1985. Hungary May...

  19. 10 CFR Appendix F to Part 73 - Nations That Are Parties to the Convention on the Physical Protection of Nuclear Material 1

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... to the Convention on the Physical Protection of Nuclear Material 1 1 An update list of party nations..., 1982. German Democratic Republic (E. Germany) Feb. 5, 1981. Guatemala Apr. 23, 1985. Hungary May...

  20. 10 CFR Appendix F to Part 73 - Nations That Are Parties to the Convention on the Physical Protection of Nuclear Material 1

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... to the Convention on the Physical Protection of Nuclear Material 1 1 An update list of party nations..., 1982. German Democratic Republic (E. Germany) Feb. 5, 1981. Guatemala Apr. 23, 1985. Hungary May...

  1. Remedial action plan and site design for stabilization of the Inactive Uranium Mill Tailings Site, Maybell, Colorado. Final report, Appendixes to attachment 3

    SciTech Connect

    Not Available

    1994-06-01

    This document contains supporting appendices to attachment 3 for the remedial action and site stabilization plan for Maybell, Colorado UMTRA site. Appendix A includes the Hydrological Services Calculations and Appendix B contains Ground Water Quality by Location data.

  2. Evaluation of elemental profiling methods, including laser-induced breakdown spectroscopy (LIBS), for the differentiation of Cannabis plant material grown in different nutrient solutions.

    PubMed

    El-Deftar, Moteaa M; Robertson, James; Foster, Simon; Lennard, Chris

    2015-06-01

    Laser-induced breakdown spectroscopy (LIBS) is an emerging atomic emission based solid sampling technique that has many potential forensic applications. In this study, the analytical performance of LIBS, as well as that of inductively coupled plasma mass spectrometry (ICP-MS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and X-ray microfluorescence (ÎŒXRF), was evaluated for the ability to conduct elemental analyses on Cannabis plant material, with a specific investigation of the possible links between hydroponic nutrients and elemental profiles from associated plant material. No such study has been previously published in the literature. Good correlation among the four techniques was observed when the concentrations or peak areas of the elements of interest were monitored. For Cannabis samples collected at the same growth time, the elemental profiles could be related to the use of particular commercial nutrients. In addition, the study demonstrated that ICP-MS, LA-ICP-MS and LIBS are suitable techniques for the comparison of Cannabis samples from different sources, with high discriminating powers being achieved. On the other hand, ÎŒXRF method was not suitable for the discrimination of Cannabis samples originating from different growth nutrients. PMID:25898182

  3. 49 CFR Appendix B to Part 178 - Alternative Leakproofness Test Methods

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Alternative Leakproofness Test Methods B Appendix B to Part 178 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Pt. 178, App. B Appendix B to...

  4. 10 CFR Appendix C to Part 73 - Nuclear Power Plant Safeguards Contingency Plans

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Nuclear Power Plant Safeguards Contingency Plans C Appendix C to Part 73 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Pt. 73, App. C Appendix C to Part 73—Nuclear Power Plant Safeguards Contingency Plans I. Safeguards Contingency Plan Licensees,...

  5. 10 CFR Appendix C to Part 73 - Nuclear Power Plant Safeguards Contingency Plans

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Nuclear Power Plant Safeguards Contingency Plans C Appendix C to Part 73 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Pt. 73, App. C Appendix C to Part 73—Nuclear Power Plant Safeguards Contingency Plans I. Safeguards Contingency Plan Licensee, applicants,...

  6. 46 CFR Appendix II to Part 153 - Metric Units Used in Part 153

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Metric Units Used in Part 153 II Appendix II to Part 153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Pt. 153, App. II Appendix II...

  7. 33 CFR Appendix B to Part 154 - Standard Specification for Tank Vent Flame Arresters

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Standard Specification for Tank Vent Flame Arresters B Appendix B to Part 154 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Pt. 154, App. B Appendix B to Part...

  8. 33 CFR Appendix B to Part 154 - Standard Specification for Tank Vent Flame Arresters

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Standard Specification for Tank Vent Flame Arresters B Appendix B to Part 154 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Pt. 154, App. B Appendix B to Part...

  9. 39 CFR Appendix A to Part 3007 - Statement of Compliance with Protective Conditions

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 39 Postal Service 1 2011-07-01 2011-07-01 false Statement of Compliance with Protective Conditions A Appendix A to Part 3007 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL TREATMENT OF NON-PUBLIC MATERIALS PROVIDED BY THE POSTAL SERVICE Pt. 3007, App. A Appendix A to Part 3007—Statement...

  10. 33 CFR Appendix A to Part 155 - Specifications for Shore Connection

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Specifications for Shore Connection A Appendix A to Part 155 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) POLLUTION OIL OR HAZARDOUS MATERIAL POLLUTION PREVENTION REGULATIONS FOR VESSELS Pt. 155, App. A Appendix A to Part...

  11. 46 CFR Appendix II to Part 153 - Metric Units Used in Part 153

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Metric Units Used in Part 153 II Appendix II to Part 153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Pt. 153, App. II Appendix II to Part 153—Metric Units Used in Part...

  12. 39 CFR Appendix A to Part 3007 - Statement of Compliance with Protective Conditions

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 39 Postal Service 1 2012-07-01 2012-07-01 false Statement of Compliance with Protective Conditions A Appendix A to Part 3007 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL TREATMENT OF NON-PUBLIC MATERIALS PROVIDED BY THE POSTAL SERVICE Pt. 3007, App. A Appendix A to Part 3007—Statement...

  13. 39 CFR Appendix A to Part 3007 - Statement of Compliance with Protective Conditions

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 39 Postal Service 1 2014-07-01 2014-07-01 false Statement of Compliance with Protective Conditions A Appendix A to Part 3007 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL TREATMENT OF NON-PUBLIC MATERIALS PROVIDED BY THE POSTAL SERVICE Pt. 3007, App. A Appendix A to Part 3007—Statement...

  14. 39 CFR Appendix A to Part 3007 - Statement of Compliance with Protective Conditions

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 39 Postal Service 1 2013-07-01 2013-07-01 false Statement of Compliance with Protective Conditions A Appendix A to Part 3007 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL TREATMENT OF NON-PUBLIC MATERIALS PROVIDED BY THE POSTAL SERVICE Pt. 3007, App. A Appendix A to Part 3007—Statement...

  15. 28 CFR Appendix I to Part 16 - Components of the Department of Justice

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 1 2011-07-01 2011-07-01 false Components of the Department of Justice I Appendix I to Part 16 Judicial Administration DEPARTMENT OF JUSTICE PRODUCTION OR DISCLOSURE OF MATERIAL OR INFORMATION Pt. 16, App. I Appendix I to Part 16—Components of the Department of Justice Unless a...

  16. 40 CFR Appendix C to Subpart E of... - Asbestos Model Accreditation Plan

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Asbestos Model Accreditation Plan C Appendix C to Subpart E of Part 763 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools Pt. 763, Subpt. E, App. C Appendix C to Subpart E of Part...

  17. 33 CFR Appendix E to Part 273 - Preventive Safety Measures in Handling of Herbicides

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Handling of Herbicides E Appendix E to Part 273 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE AQUATIC PLANT CONTROL Pt. 273, App. E Appendix E to Part 273.... Diluted oil based herbicides are flammable and must be stored separate from other materials. e....

  18. 28 CFR Appendix I to Part 16 - Components of the Department of Justice

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Components of the Department of Justice I Appendix I to Part 16 Judicial Administration DEPARTMENT OF JUSTICE PRODUCTION OR DISCLOSURE OF MATERIAL OR INFORMATION Pt. 16, App. I Appendix I to Part 16—Components of the Department of Justice Unless a...

  19. United States Air Force 611th Civil Engineer Squadron, Elmendorf AFB, Alaska. Final remedial investigation report, Galena Airport and Campion Air Station, Alaska. Volume 6. Appendix C-G

    SciTech Connect

    1996-03-01

    ;Contents: Appendix C-Regulatory Discussion of Applicable or Relevant and Appropriate Requirement; Appendix D-Statistical Discussion; Appendix E-Field Documents, including Drilling Logs (1992-3), Monitoring Well Construction Diagrams (1992-3), Well Development Forms (1992-3), Ground Water Sampling Forms (1992-4), Water Level Survey Results, and Survey Data (1992-3); Appendix F-Hydrocarbon Recovery Testing at Galena Airport; and Appendix G-Geophysics and Soil Gas Reports.

  20. Beginning Spanish in Grade Three: MLA Teacher's Guide. A Course of Study Including Methods, Materials, and Aids for Teaching Conversational Spanish to Third-Grade Children.

    ERIC Educational Resources Information Center

    Thompson, Mary P.; And Others

    This is the first in a series of texts in a conversational Spanish course for elementary school children. Fifteen basic units present introductory linguistic patterns and cultural insights into the lives of Spaniards. They include: (1) Greetings, Identifications, and Farewells, (2) Some Classroom Objects and Instructions, (3) Colors, (4) More…

  1. Continuing Spanish in Grade Five: MLA Teacher's Guide. A Course of Study Including Methods, Materials, and Aids for Teaching Conversational Spanish to Fifth-Grade Children.

    ERIC Educational Resources Information Center

    Thompson, Mary P.; And Others

    This is the third volume in a series of texts in a conversational Spanish course for elementary school children. Nine basic units present introductory linguistic patterns and cultural insights into the lives of the Spanish people. They include: (1) Review Unit 1, ("Cristobal Colon"), (2) Review Unit 2, (3) "Un Accidente,""La Navidad," and…

  2. Beginning Spanish in Grade Three: MLA Teacher's Guide. A Course of Study Including Methods, Materials, and Aids for Teaching Conversational Spanish to Third-Grade Children.

    ERIC Educational Resources Information Center

    Thompson, Mary P.; And Others

    This is the first in a series of texts in a conversational Spanish course for elementary school children. Fifteen basic units present introductory linguistic patterns and cultural insights into the lives of Spaniards. They include: (1) Greetings, Identifications, and Farewells, (2) Some Classroom Objects and Instructions, (3) Colors, (4) More


  3. Continuing French in Grade Four: MLA Teacher's Guide. A Course of Study Including Methods, Materials, and Aids for Teaching French to Fourth-Grade Children.

    ERIC Educational Resources Information Center

    Thompson, Mary P.; And Others

    This teacher's guide for use in a fourth-grade French course concentrates on the development of basic audiolingual skills. Twelve lessons, each containing an exposition, dialogue, teaching procedures, and dialogue adaptation, emphasize the use of French during classroom instruction. Lessons include: (1) a review unit, (2) "La chemise neuve," (3)


  4. Corrective Action Investigation Plan for Corrective Action Unit 529: Area 25 Contaminated Materials, Nevada Test Site, Nevada, Rev. 0, Including Record of Technical Change No. 1

    SciTech Connect

    U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office

    2003-02-26

    This Corrective Action Investigation Plan contains the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office's approach to collect the data necessary to evaluate corrective action alternatives appropriate for the closure of Corrective Action Unit (CAU) 529, Area 25 Contaminated Materials, Nevada Test Site (NTS), Nevada, under the Federal Facility Agreement and Consent Order. CAU 529 consists of one Corrective Action Site (25-23-17). For the purpose of this investigation, the Corrective Action Site has been divided into nine parcels based on the separate and distinct releases. A conceptual site model was developed for each parcel to address the translocation of contaminants from each release. The results of this investigation will be used to support a defensible evaluation of corrective action alternatives in the corrective action decision document.

  5. 36 CFR Appendix A to Part 1275 - Settlement Agreement

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... NIXON PRESIDENTIAL MATERIALS PRESERVATION AND PROTECTION OF AND ACCESS TO THE PRESIDENTIAL HISTORICAL MATERIALS OF THE NIXON ADMINISTRATION Pt. 1275, App. A Appendix A to Part 1275—Settlement Agreement... no longer apply. This change is reflected in 36 CFR 1275.64. Settlement Agreement This...

  6. Discharge and water-quality data for selected streams at low flow including some bottom-material analyses, and limnological study of six lakes, Westchester County, New York

    USGS Publications Warehouse

    Archer, Roger J.; Turk, John T.

    1977-01-01

    Water-quality data collected at sites on 33 Westchester County, N.Y., streams August 4 to 6, 1976 during low flow (80-percent or more duration) indicate that although the chemical characteristics of most streams met State standards for water-supply source waters, none met the coliform standard, and several failed to meet standards for organic nitrogen, pH, and dissolved oxygen. Chemical analyses of bottom materials indicated detectable concentrations of the insecticides chlordane, dieldrin, and DDT at most of the 17 stream sites sampled. Polychlorinated biphenyls(PCB's) were found in more than half the samples, and the lead concentration on one stream was significantly higher than at the other sites. The six lakes studied are similar in bedrock geology, climate, and algal types and numbers. Minor differences in the chemistry of the lakes is attributable to the presence or absence of marble (calcium carbonate) in the gneissic basins, septic loadings of soluble constituents, or runoff containing salt from winter road deicing. The lakes probably receive most of their water by direct runoff and groundwater seepage rather than from major streams. All six lakes can be classed as eutrophic on the basis of algal type and density, dissolved-oxygen distribution, and nitrogen and phosphorus concentrations. (Woodard-USGS)

  7. Management of Appendix Cancer.

    PubMed

    Kelly, Kaitlyn J

    2015-12-01

    Primary cancers of the appendix are rare and are frequently diagnosed after surgery for appendicitis, presumed ovarian primary malignancy, or other indications. Primary appendix cancers are histologically diverse, and classification of these tumors has historically been confusing because of the nonstandardized nomenclature that is used. This review aimed to describe the epidemiology, presentation, workup, staging, and management of primary appendix cancers using current, recommended nomenclature. For this purpose, tumors were broadly classified as colonic-type or mucinous adenocarcinoma, goblet cell adenocarcinoma, or neuroendocrine carcinoma. Signet ring cell carcinoma was not regarded as an individual entity. The presence of signet ring cells is a histologic feature that may or may not be present in colonic-type or mucinous adenocarcinoma. The management of primary appendix cancer is complex and is dependent on the histologic subtype and extent of disease. Randomized, prospective trials do not exist for these rare tumors and management is largely guided by retrospective data expert consensus guidelines, which are summarized here. PMID:26648795

  8. Appendix E: Geology

    SciTech Connect

    Reidel, Steve; Chamness, Mickie A.

    2008-01-17

    This appendix provides a detailed description of geology under the Central Plateau of the Hanford Site, emphasizing the areas around tank farms. It is to be published by client CH2M HILL Hanford Group, Inc., as part of a larger, multi-contractor technical report.

  9. Fatigue strength reduction model: RANDOM3 and RANDOM4 user manual. Appendix 2: Development of advanced methodologies for probabilistic constitutive relationships of material strength models

    NASA Technical Reports Server (NTRS)

    Boyce, Lola; Lovelace, Thomas B.

    1989-01-01

    FORTRAN programs RANDOM3 and RANDOM4 are documented in the form of a user's manual. Both programs are based on fatigue strength reduction, using a probabilistic constitutive model. The programs predict the random lifetime of an engine component to reach a given fatigue strength. The theoretical backgrounds, input data instructions, and sample problems illustrating the use of the programs are included.

  10. Fatigue crack growth model RANDOM2 user manual. Appendix 1: Development of advanced methodologies for probabilistic constitutive relationships of material strength models

    NASA Technical Reports Server (NTRS)

    Boyce, Lola; Lovelace, Thomas B.

    1989-01-01

    FORTRAN program RANDOM2 is presented in the form of a user's manual. RANDOM2 is based on fracture mechanics using a probabilistic fatigue crack growth model. It predicts the random lifetime of an engine component to reach a given crack size. Details of the theoretical background, input data instructions, and a sample problem illustrating the use of the program are included.

  11. Materialism.

    PubMed

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. PMID:26301463

  12. Nondestructive verification and assay systems for spent fuels. Technical appendixes

    SciTech Connect

    Cobb, D.D.; Phillips, J.R.; Baker, M.P.

    1982-04-01

    Six technical appendixes are presented that provide important supporting technical information for the study of the application of nondestructive measurements to spent-fuel storage. Each appendix addresses a particular technical subject in a reasonably self-contained fashion. Appendix A is a comparison of spent-fuel data predicted by reactor operators with measured data from reprocessors. This comparison indicates a rather high level of uncertainty in previous burnup calculations. Appendix B describes a series of nondestructive measurements at the GE-Morris Operation Spent-Fuel Storage Facility. This series of experiments successfully demonstrated a technique for reproducible positioning of fuel assemblies for nondestructive measurement. The experimental results indicate the importance of measuring the axial and angular burnup profiles of irradiated fuel assemblies for quantitative determination of spent-fuel parameters. Appendix C is a reasonably comprehensive bibliography of reports and symposia papers on spent-fuel nondestructive measurements to April 1981. Appendix D is a compendium of spent-fuel calculations that includes isotope production and depletion calculations using the EPRI-CINDER code, calculations of neutron and gamma-ray source terms, and correlations of these sources with burnup and plutonium content. Appendix E describes the pulsed-neutron technique and its potential application to spent-fuel measurements. Although not yet developed, the technique holds the promise of providing separate measurements of the uranium and plutonium fissile isotopes. Appendix F describes the experimental program and facilities at Los Alamos for the development of spent-fuel nondestructive measurement systems. Measurements are reported showing that the active neutron method is sensitive to the replacement of a single fuel rod with a dummy rod in an unirradiated uranium fuel assembly.

  13. 49 CFR Appendix D to Part 229 - Criteria for Certification of Crashworthy Event Recorder Memory Module

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Recorder Memory Module D Appendix D to Part 229 Transportation Other Regulations Relating to Transportation... Memory Module Section 229.135(b) requires that certain locomotives be equipped with an event recorder that includes a certified crashworthy event recorder memory module. This appendix prescribes...

  14. 49 CFR Appendix D to Part 229 - Criteria for Certification of Crashworthy Event Recorder Memory Module

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Recorder Memory Module D Appendix D to Part 229 Transportation Other Regulations Relating to Transportation... Memory Module Section 229.135(b) requires that certain locomotives be equipped with an event recorder that includes a certified crashworthy event recorder memory module. This appendix prescribes...

  15. 49 CFR Appendix D to Part 229 - Criteria for Certification of Crashworthy Event Recorder Memory Module

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Recorder Memory Module D Appendix D to Part 229 Transportation Other Regulations Relating to Transportation... Memory Module Section 229.135(b) requires that certain locomotives be equipped with an event recorder that includes a certified crashworthy event recorder memory module. This appendix prescribes...

  16. 49 CFR Appendix D to Part 229 - Criteria for Certification of Crashworthy Event Recorder Memory Module

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Recorder Memory Module D Appendix D to Part 229 Transportation Other Regulations Relating to Transportation... Memory Module Section 229.135(b) requires that certain locomotives be equipped with an event recorder that includes a certified crashworthy event recorder memory module. This appendix prescribes...

  17. 49 CFR Appendix E to Part 238 - General Principles of Reliability-Based Maintenance Programs

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Maintenance Programs E Appendix E to Part 238 Transportation Other Regulations Relating to Transportation... STANDARDS Pt. 238, App. E Appendix E to Part 238—General Principles of Reliability-Based Maintenance... reliability beyond the design reliability. (e) When a maintenance program is developed, it includes tasks...

  18. 49 CFR Appendix E to Part 238 - General Principles of Reliability-Based Maintenance Programs

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Maintenance Programs E Appendix E to Part 238 Transportation Other Regulations Relating to Transportation... STANDARDS Pt. 238, App. E Appendix E to Part 238—General Principles of Reliability-Based Maintenance... reliability beyond the design reliability. (e) When a maintenance program is developed, it includes tasks...

  19. 19 CFR Appendix D to Part 113 - Importer Security Filing Bond

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) agrees to comply with all Importer Security Filing requirements set forth in 19 CFR part 149, including... 19 Customs Duties 1 2012-04-01 2012-04-01 false Importer Security Filing Bond D Appendix D to Part... THE TREASURY CUSTOMS BONDS Pt. 113, App. D Appendix D to Part 113—Importer Security Filing Bond...

  20. 14 CFR Appendix E to Part 417 - Flight Termination System Testing and Analysis

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... operating environments. A launch operator must identify and implement any additional test or analysis for... generic design, workmanship, or process problems with other flight components of similar configuration. (f... appendix must include the environment design margin required by appendix D of this part. The...

  1. 49 CFR Appendix D to Part 229 - Criteria for Certification of Crashworthy Event Recorder Memory Module

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Recorder Memory Module D Appendix D to Part 229 Transportation Other Regulations Relating to Transportation... Memory Module Section 229.135(b) requires that certain locomotives be equipped with an event recorder that includes a certified crashworthy event recorder memory module. This appendix prescribes...

  2. 49 CFR Appendix C - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false C Appendix C Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Train Operations at Track Classes 6 and Higher Inspection records. Appendix C...

  3. 46 CFR Appendix A - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false A Appendix A Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN CHEMICAL TESTING Management Information System Management Information System requirements. Appendix A 46 CFR Ch. I (10-1-10 Edition) Coast Guard, DHS...

  4. 49 CFR Appendix - Editorial Note:

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 16084; 28 CFR § 0.66). The Assistant Attorney General, Land and Natural Resources Division, has further.... Editorial Note: For Federal Register citations affecting appendix A to part 1, see the List of CFR Sections... Delegations to Saint Lawrence Seaway Development Corporation Administrator. Pt. 1, App. A Appendix A to Part...

  5. 46 CFR Appendix A - [Reserved

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false A Appendix A Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN CHEMICAL TESTING Management Information System Management Information System requirements. Appendix A 46 CFR Ch. I (10-1-12 Edition) Coast Guard, DHS...

  6. 46 CFR Appendix A - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false A Appendix A Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN CHEMICAL TESTING Management Information System Management Information System requirements. Appendix A 46 CFR Ch. I (10-1-11 Edition) Coast Guard, DHS...

  7. 40 CFR Appendix B to Part 61 - Test Methods

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CFR part 60. Therefore, to obtain reliable results, persons using this method should have a thorough....2Sample Analysis. 4.2.1ICl concentrations greater than 10−4 molar inhibit the reduction of the Hg (II) ion... performance. Some material is incorporated by reference from methods in appendix A to 40 CFR part 60 and...

  8. 40 CFR Appendix B to Part 61 - Test Methods

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CFR part 60. Therefore, to obtain reliable results, persons using this method should have a thorough....2Sample Analysis. 4.2.1ICl concentrations greater than 10−4 molar inhibit the reduction of the Hg (II) ion... performance. Some material is incorporated by reference from methods in appendix A to 40 CFR part 60 and...

  9. 40 CFR Appendix B to Part 61 - Test Methods

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CFR part 60. Therefore, to obtain reliable results, persons using this method should have a thorough....2Sample Analysis. 4.2.1ICl concentrations greater than 10−4 molar inhibit the reduction of the Hg (II) ion... performance. Some material is incorporated by reference from methods in appendix A to 40 CFR part 60 and...

  10. 40 CFR Appendix B to Part 61 - Test Methods

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CFR part 60. Therefore, to obtain reliable results, persons using this method should have a thorough....2Sample Analysis. 4.2.1ICl concentrations greater than 10−4 molar inhibit the reduction of the Hg (II) ion... performance. Some material is incorporated by reference from methods in appendix A to 40 CFR part 60 and...

  11. 14 CFR Appendix F to Part 23 - Test Procedure

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Test Procedure F Appendix F to Part 23 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS...—Test Procedure Acceptable test procedure for self-extinguishing materials for showing compliance...

  12. 49 CFR Appendix A to Part 192 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false A Appendix A to Part 192 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY...

  13. 49 CFR Appendix A to Part 192 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false A Appendix A to Part 192 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY...

  14. 14 CFR Appendix F to Part 23 - Test Procedure

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Test Procedure F Appendix F to Part 23...—Test Procedure Acceptable test procedure for self-extinguishing materials for showing compliance with... as sandwich panels, may not be separated for a test. The specimen thickness must be no thicker...

  15. 48 CFR 30.602 - Materiality.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... materiality, the CFAO shall use the criteria in 48 CFR 9903.305 (FAR Appendix). (b) A CFAO determination of materiality— (1) May be made before or after a general dollar magnitude proposal has been submitted,...

  16. 48 CFR 30.602 - Materiality.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... materiality, the CFAO shall use the criteria in 48 CFR 9903.305 (FAR Appendix). (b) A CFAO determination of materiality— (1) May be made before or after a general dollar magnitude proposal has been submitted,...

  17. 10 CFR Appendix O to Part 110 - Illustrative List of Fuel Element Fabrication Plant Equipment and Components Under NRC's Export...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Illustrative List of Fuel Element Fabrication Plant Equipment and Components Under NRC's Export Licensing Authority O Appendix O to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. O Appendix O to Part 110—Illustrative List of...

  18. 10 CFR Appendix A to Part 30 - Criteria Relating to Use of Financial Tests and Parent Company Guarantees for Providing...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Criteria Relating to Use of Financial Tests and Parent Company Guarantees for Providing Reasonable Assurance of Funds for Decommissioning A Appendix A to Part 30 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC LICENSING OF BYPRODUCT MATERIAL Pt. 30, App. A Appendix A to...

  19. 10 CFR Appendix A to Part 73 - U.S. Nuclear Regulatory Commission Offices and Classified Mailing Addresses

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false U.S. Nuclear Regulatory Commission Offices and Classified Mailing Addresses A Appendix A to Part 73 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Pt. 73, App. A Appendix A to Part 73—U.S. Nuclear Regulatory Commission Offices and Classified Mailing...

  20. 10 CFR Appendix A to Part 73 - U.S. Nuclear Regulatory Commission Offices and Classified Mailing Addresses

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false U.S. Nuclear Regulatory Commission Offices and Classified Mailing Addresses A Appendix A to Part 73 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Pt. 73, App. A Appendix A to Part 73—U.S. Nuclear Regulatory...

  1. 10 CFR Appendix A to Part 73 - U.S. Nuclear Regulatory Commission Offices and Classified Mailing Addresses

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false U.S. Nuclear Regulatory Commission Offices and Classified Mailing Addresses A Appendix A to Part 73 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Pt. 73, App. A Appendix A to Part 73—U.S. Nuclear Regulatory...

  2. 10 CFR Appendix A to Part 73 - U.S. Nuclear Regulatory Commission Offices and Classified Mailing Addresses

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false U.S. Nuclear Regulatory Commission Offices and Classified Mailing Addresses A Appendix A to Part 73 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Pt. 73, App. A Appendix A to Part 73—U.S. Nuclear Regulatory Commission Offices and Classified Mailing...

  3. 10 CFR Appendix A to Part 73 - U.S. Nuclear Regulatory Commission Offices and Classified Mailing Addresses

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false U.S. Nuclear Regulatory Commission Offices and Classified Mailing Addresses A Appendix A to Part 73 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Pt. 73, App. A Appendix A to Part 73—U.S. Nuclear Regulatory...

  4. 10 CFR Appendix A to Part 110 - Illustrative List of Nuclear Reactor Equipment Under NRC Export Licensing Authority

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Illustrative List of Nuclear Reactor Equipment Under NRC Export Licensing Authority A Appendix A to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. A Appendix A to Part...

  5. 10 CFR Appendix A to Part 110 - Illustrative List of Nuclear Reactor Equipment Under NRC Export Licensing Authority

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Illustrative List of Nuclear Reactor Equipment Under NRC Export Licensing Authority A Appendix A to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. A Appendix A to Part...

  6. 10 CFR Appendix N to Part 110 - Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's Export Licensing Authority N Appendix N to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. N Appendix N to Part 110—Illustrative List...

  7. 10 CFR Appendix N to Part 110 - Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's Export Licensing Authority N Appendix N to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. N Appendix N to Part 110—Illustrative List...

  8. 10 CFR Appendix N to Part 110 - Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's Export Licensing Authority N Appendix N to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. N Appendix N to Part 110—Illustrative List...

  9. 44 CFR Appendix A to Part 353 - Memorandum of Understanding Between Federal Emergency Management Agency and Nuclear Regulatory...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... April 9, 1985 (published April 18, 1985, 50 FR 15485), and published as Appendix A to 44 CFR part 353... correct exercise deficiencies; (6) correlation of FEMA actions on withdrawal of approvals under 44 CFR... 10 CFR part 50, appendix E, and certain other fuel cycle and materials licensees which have...

  10. 10 CFR Appendix C to Part 30 - Criteria Relating to Use of Financial Tests and Self Guarantees for Providing Reasonable...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Criteria Relating to Use of Financial Tests and Self Guarantees for Providing Reasonable Assurance of Funds for Decommissioning C Appendix C to Part 30 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC LICENSING OF BYPRODUCT MATERIAL Pt. 30, App. C Appendix C to Part...

  11. 10 CFR Appendix A to Part 30 - Criteria Relating to Use of Financial Tests and Parent Company Guarantees for Providing...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Criteria Relating to Use of Financial Tests and Parent Company Guarantees for Providing Reasonable Assurance of Funds for Decommissioning A Appendix A to Part 30 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC LICENSING OF BYPRODUCT MATERIAL Pt. 30, App. A Appendix A to...

  12. 10 CFR Appendix C to Part 30 - Criteria Relating to Use of Financial Tests and Self Guarantees for Providing Reasonable...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Criteria Relating to Use of Financial Tests and Self Guarantees for Providing Reasonable Assurance of Funds for Decommissioning C Appendix C to Part 30 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC LICENSING OF BYPRODUCT MATERIAL Pt. 30, App. C Appendix C to Part...

  13. Prison Population and Policy Choices. Volume II: Technical Appendix.

    ERIC Educational Resources Information Center

    Rutherford, Andrew; And Others

    Contents of this research report appendix include a summary of the methodology employed for surveying corrections agencies and institutions during phase one and an outline of a Markov modeling exercise to be applied in phase two of the project. The Dynamic Correctional Planning Model is presented equation by equation in chapter 1 including…

  14. Preliminary Systems Design Study assessment report. Volume 8, Appendixes

    SciTech Connect

    Mayberry, J.L.; Feizollahi, F.; Del Signore, J.C.

    1992-01-01

    The System Design Study (SDS), part of the Waste Technology Development Department at the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex`s Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each concept. This volume of the Systems Design Study contain four Appendixes that were part of the study. Appendix A is an EG&G Idaho, Inc., report that represents a review and compilation of previous reports describing the wastes and quantities disposed in the Subsurface Disposal Area of the Idaho National Engineering Laboratory. Appendix B contains the process flowsheets considered in this study, but not selected for detailed analysis. Appendix C is a historical tabulation of radioactive waste incinerators. Appendix D lists Department of Energy facilities where cementation stabilization systems have been used.

  15. 23 CFR Appendix G to Subpart A of... - Special Reporting Requirements for “Hometown” or “Imposed” Plan Areas

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... to 23 CFR part 230) and in accordance with the instructions included thereon. ...Imposedâ Plan Areas G Appendix G to Subpart A of Part 230 Highways FEDERAL HIGHWAY ADMINISTRATION... Federal-Aid Construction Contracts (Including Supportive Services) Pt. 230, Subpt. A, App. G Appendix G...

  16. 23 CFR Appendix G to Subpart A of... - Special Reporting Requirements for “Hometown” or “Imposed” Plan Areas

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... to 23 CFR part 230) and in accordance with the instructions included thereon. ...Imposedâ Plan Areas G Appendix G to Subpart A of Part 230 Highways FEDERAL HIGHWAY ADMINISTRATION... Federal-Aid Construction Contracts (Including Supportive Services) Pt. 230, Subpt. A, App. G Appendix G...

  17. 23 CFR Appendix G to Subpart A of... - Special Reporting Requirements for “Hometown” or “Imposed” Plan Areas

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... to 23 CFR part 230) and in accordance with the instructions included thereon. ...Imposedâ Plan Areas G Appendix G to Subpart A of Part 230 Highways FEDERAL HIGHWAY ADMINISTRATION... Federal-Aid Construction Contracts (Including Supportive Services) Pt. 230, Subpt. A, App. G Appendix G...

  18. 23 CFR Appendix G to Subpart A of... - Special Reporting Requirements for “Hometown” or “Imposed” Plan Areas

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... to 23 CFR part 230) and in accordance with the instructions included thereon. ...Imposedâ Plan Areas G Appendix G to Subpart A of Part 230 Highways FEDERAL HIGHWAY ADMINISTRATION... Federal-Aid Construction Contracts (Including Supportive Services) Pt. 230, Subpt. A, App. G Appendix G...

  19. 23 CFR Appendix G to Subpart A of... - Special Reporting Requirements for “Hometown” or “Imposed” Plan Areas

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... to 23 CFR part 230) and in accordance with the instructions included thereon. ...Imposedâ Plan Areas G Appendix G to Subpart A of Part 230 Highways FEDERAL HIGHWAY ADMINISTRATION... Federal-Aid Construction Contracts (Including Supportive Services) Pt. 230, Subpt. A, App. G Appendix G...

  20. Small-Scale High Temperature Melter-1 (SSHTM-1) Data Package. Appendix A

    SciTech Connect

    Smith, G.L.

    1996-03-01

    This appendix provides the data for Alternate HTM Flowsheet 1 (No Reductant Addition, Nitric Acid) melter feed preparation activities in both the laboratory and small-scale testing. The first section provides an outline of this appendix. The melter feed preparation data are presented in the next two main sections, laboratory welter feed preparation data and small-scale melter feed preparation data. Section 3.0 provides the laboratory data which is discussed in the main body of the Small-Scale High Temperature-1 (SSHTM-1) Data Package, milestone C95-02.02Y. Section 3.1 gives the flowsheet in outline form as used in the laboratory-scale tests. This section also includes the ``Laboratory Melter Feed Preparation Activity Log`` which gives a chronological account of the test in terms of time, temperature, slurry pH, and specific observations about slurry appearance, acid addition rates, and samples taken. The ``Laboratory Melter Feed Preparation Activity Log`` provides a road map to the reader by which all the activity and data from the laboratory can be easily accessed. A summary of analytical data is presented next, section 3.2, which covers starting materials and progresses to the analysis of the melter feed. The next section, 3.3, characterizes the off-gas generation that occurs during the slurry processing. The following section, 3.4, provides the rheology data gathered including gram waste oxide loading information for the various slurries tested. The final section, 3.5. includes data from standard crucible redox testing. Section 4.0 provides the small-scale data tn parallel form to section 3.0. Section 5.0 concludes with the references for this appendix.

  1. Small-Scale High Temperature Melter-1 (SSHTM-1) Data Package. Appendix B

    SciTech Connect

    1996-03-01

    This appendix provides the data for Alternate HTM Flowsheet 2 (Glycolic Acid) melter feed preparation activities in both the laboratory- and small-scale testing. The first section provides an outline of this appendix. The melter feed preparation data are presented in the next two main sections, laboratory melter feed preparation data and small-scale melter feed preparation data. Section 3.0 provides the laboratory data which is discussed in the main body of the Small-Scale High Temperature-1 (SSHTM-1) Data Package, milestone C95-02.02Y. Section 3.1 gives the flowsheet in outline form as used in the laboratory-scale tests. This section also includes the ``Laboratory Melter Feed Preparation Activity Log`` which gives A chronological account of the test in terms of time, temperature, slurry pH, and specific observations about slurry appearance, acid addition rates, and samples taken. The ``Laboratory Melter Feed Preparation Activity Log`` provides a road map to the reader by which all the activity and data from the laboratory can be easily accessed. A summary of analytical data is presented next, section 3.2, which covers starting materials and progresses to the analysis of the melter feed. The next section, 3.3, characterizes the off-gas generation that occurs during the slurry processing. The following section, 3.4, provides the rheology data gathered including gram waste oxide loading information for the various slurries tested. The final section, 3.5, includes data from standard crucible redox testing. Section 4.0 provides the small-scale data in parallel form to section 3.0. Section 5.0 concludes with the references for this appendix.

  2. 10 CFR Appendix C to Part 835 - Derived Air Concentration (DAC) for Workers From External Exposure During Immersion in a Cloud of...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Exposure During Immersion in a Cloud of Airborne Radioactive Material C Appendix C to Part 835 Energy... Concentration (DAC) for Workers From External Exposure During Immersion in a Cloud of Airborne Radioactive...-infinite cloud of airborne radioactive material. The DACs listed in this appendix may be modified to...

  3. 10 CFR Appendix C to Part 835 - Derived Air Concentration (DAC) for Workers From External Exposure During Immersion in a Cloud of...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Exposure During Immersion in a Cloud of Airborne Radioactive Material C Appendix C to Part 835 Energy... Concentration (DAC) for Workers From External Exposure During Immersion in a Cloud of Airborne Radioactive...-infinite cloud of airborne radioactive material. The DACs listed in this appendix may be modified to...

  4. 10 CFR 150.31 - Requirements for Agreement State regulation of byproduct material.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... with the requirements in appendix A of 10 CFR part 40 of this chapter to the maximum extent practicable... material, an Agreement State shall require: (1) Compliance with requirements in appendix A of 10 CFR part... in appendix A of 10 CFR part 40 of this chapter adopted and enforced by the Commission for the...

  5. 10 CFR 150.31 - Requirements for Agreement State regulation of byproduct material.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... with the requirements in appendix A of 10 CFR part 40 of this chapter to the maximum extent practicable... material, an Agreement State shall require: (1) Compliance with requirements in appendix A of 10 CFR part... in appendix A of 10 CFR part 40 of this chapter adopted and enforced by the Commission for the...

  6. 10 CFR 150.31 - Requirements for Agreement State regulation of byproduct material.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... with the requirements in appendix A of 10 CFR part 40 of this chapter to the maximum extent practicable... material, an Agreement State shall require: (1) Compliance with requirements in appendix A of 10 CFR part... in appendix A of 10 CFR part 40 of this chapter adopted and enforced by the Commission for the...

  7. 10 CFR 150.31 - Requirements for Agreement State regulation of byproduct material.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... with the requirements in appendix A of 10 CFR part 40 of this chapter to the maximum extent practicable... material, an Agreement State shall require: (1) Compliance with requirements in appendix A of 10 CFR part... in appendix A of 10 CFR part 40 of this chapter adopted and enforced by the Commission for the...

  8. 10 CFR 150.31 - Requirements for Agreement State regulation of byproduct material.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... with the requirements in appendix A of 10 CFR part 40 of this chapter to the maximum extent practicable... material, an Agreement State shall require: (1) Compliance with requirements in appendix A of 10 CFR part... in appendix A of 10 CFR part 40 of this chapter adopted and enforced by the Commission for the...

  9. 34 CFR 303.18 - Include; including.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 2 2012-07-01 2012-07-01 false Include; including. 303.18 Section 303.18 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS...

  10. 34 CFR 303.18 - Include; including.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 2 2014-07-01 2013-07-01 true Include; including. 303.18 Section 303.18 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS...

  11. 34 CFR 303.15 - Include; including.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Include; including. 303.15 Section 303.15 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS...

  12. 34 CFR 303.15 - Include; including.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 2 2011-07-01 2010-07-01 true Include; including. 303.15 Section 303.15 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS...

  13. 34 CFR 303.18 - Include; including.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 2 2013-07-01 2013-07-01 false Include; including. 303.18 Section 303.18 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS...

  14. Materials

    NASA Technical Reports Server (NTRS)

    Glaessgen, Edward H.; Schoeppner, Gregory A.

    2006-01-01

    NASA Langley Research Center has successfully developed an electron beam freeform fabrication (EBF3) process, a rapid metal deposition process that works efficiently with a variety of weldable alloys. The EBF3 process can be used to build a complex, unitized part in a layer-additive fashion, although the more immediate payoff is for use as a manufacturing process for adding details to components fabricated from simplified castings and forgings or plate products. The EBF3 process produces structural metallic parts with strengths comparable to that of wrought product forms and has been demonstrated on aluminum, titanium, and nickel-based alloys to date. The EBF3 process introduces metal wire feedstock into a molten pool that is created and sustained using a focused electron beam in a vacuum environment. Operation in a vacuum ensures a clean process environment and eliminates the need for a consumable shield gas. Advanced metal manufacturing methods such as EBF3 are being explored for fabrication and repair of aerospace structures, offering potential for improvements in cost, weight, and performance to enhance mission success for aircraft, launch vehicles, and spacecraft. Near-term applications of the EBF3 process are most likely to be implemented for cost reduction and lead time reduction through addition of details onto simplified preforms (casting or forging). This is particularly attractive for components with protruding details that would require a significantly large volume of material to be machined away from an oversized forging, offering significant reductions to the buy-to-fly ratio. Future far-term applications promise improved structural efficiency through reduced weight and improved performance by exploiting the layer-additive nature of the EBF3 process to fabricate tailored unitized structures with functionally graded microstructures and compositions.

  15. 18 CFR Appendix A to Subpart H of... - Appendix A to Subpart H of Part 35

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Appendix A to Subpart H of Part 35 A Appendix A to Subpart H of Part 35 Conservation of Power and Water Resources FEDERAL... Rates Pt. 35, Subpt. H, App. A Appendix A to Subpart H of Part 35 Appendix A Standard Screen...

  16. 18 CFR Appendix A to Subpart H of... - Appendix A to Subpart H of Part 35

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Appendix A to Subpart H of Part 35 A Appendix A to Subpart H of Part 35 Conservation of Power and Water Resources FEDERAL... Rates Pt. 35, Subpt. H, App. A Appendix A to Subpart H of Part 35 Appendix A Standard Screen...

  17. 18 CFR Appendix A to Subpart H of... - Appendix A to Subpart H of Part 35

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Appendix A to Subpart H of Part 35 A Appendix A to Subpart H of Part 35 Conservation of Power and Water Resources FEDERAL... Rates Pt. 35, Subpt. H, App. A Appendix A to Subpart H of Part 35 Appendix A Standard Screen...

  18. 18 CFR Appendix A to Subpart H of... - Appendix A to Subpart H of Part 35

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Appendix A to Subpart H of Part 35 A Appendix A to Subpart H of Part 35 Conservation of Power and Water Resources FEDERAL... Rates Pt. 35, Subpt. H, App. A Appendix A to Subpart H of Part 35 Appendix A Standard Screen...

  19. Gasoline from coal in the state of Illinois: feasibility study. Appendix 1. Design

    SciTech Connect

    Not Available

    1980-01-01

    Appendix 1 includes the overall design philosophy about units in parallel, specifications above actual need, spares maintenance, etc. Most of the report involves engineering work sheets for various equipments. (LTN)

  20. 12 CFR Appendix C to Part 41 - Model Forms for Opt-Out Notices

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... will lose the safe harbor that this appendix provides. Acceptable changes include, for example: 1....” 9. Providing a place on the form for the consumer to fill in identifying information, such as his...

  1. Hanford environmental analytical methods (methods as of March 1990). Appendix A3-R

    SciTech Connect

    Goheen, S.C.; McCulloch, M.; Daniel, J.L.

    1993-05-01

    Techniques in use at the Hanford Reservation as of March, 1990 for the analysis of liquids and radioactive effluents are described. Limitations and applications of the techniques are included. This report is Appendix A3-R.

  2. FINAL REPORT OF THE RESEARCH PROJECT FOR THE EVALUATION OF THE UDC AS THE INDEXING LANGUAGE FOR A MECHANIZED REFERENCE RETRIEVAL SYSTEM. APPENDIX 4--UDC ENGLISH MEDIUM EDITION MANUSCRIPT.

    ERIC Educational Resources Information Center

    FREEMAN, ROBERT R.; ATHERTON, PAULINE

    THIS APPENDIX TO THE FINAL REPORT OF THE AIP/UDC PROJECT (LI 000 583) INCLUDES THE FULL MANUSCRIPT FOR THE MAIN CLASSES OF AN ENGLISH LANGUAGE MEDIUM EDITION OF UDC WITH THE EXCEPTION OF CLASS 6. THE RAW MATERIAL FOR THE MANUSCRIPT WAS (1) AN EARLIER VERSION OF THE AIP/UDC PROJECT ENGLISH LANGUAGE MASTER FILE, ISSUED AS LI 000 585, (2) RECENT


  3. Appendix H - GPRA06 industrial technologies program documentation

    SciTech Connect

    None, None

    2009-01-18

    The information provided in this appendix is based on the Industrial Technologies Program (ITP) report of the GPRA06 process, "GPRA06 Quality Metrics - Methodology and Results," Energetics Inc., October 25, 2004. The report includes additional methodological details and the actual off-line energy savings results submitted to the Office of Energy Efficiency and Renewable Energy (EERE).

  4. Operational Control Procedures for the Activated Sludge Process: Appendix.

    ERIC Educational Resources Information Center

    West, Alfred W.

    This document is the appendix for a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. Categories discussed include: control test data, trend charts, moving averages, semi-logarithmic plots, probability…

  5. BUILDING MATERIALS RECLAMATION PROGRAM

    SciTech Connect

    David C. Weggel; Shen-En Chen; Helene Hilger; Fabien Besnard; Tara Cavalline; Brett Tempest; Adam Alvey; Madeleine Grimmer; Rebecca Turner

    2010-08-31

    This report describes work conducted on the Building Materials Reclamation Program for the period of September 2008 to August 2010. The goals of the project included selecting materials from the local construction and demolition (C&D) waste stream and developing economically viable reprocessing, reuse or recycling schemes to divert them from landfill storage. Educational resources as well as conceptual designs and engineering feasibility demonstrations were provided for various aspects of the work. The project was divided into two distinct phases: Research and Engineering Feasibility and Dissemination. In the Research Phase, a literature review was initiated and data collection commenced, an advisory panel was organized, and research was conducted to evaluate high volume C&D materials for nontraditional use; five materials were selected for more detailed investigations. In the Engineering Feasibility and Dissemination Phase, a conceptual study for a regional (Mecklenburg and surrounding counties) collection and sorting facility was performed, an engineering feasibility project to demonstrate the viability of recycling or reuse schemes was created, the literature review was extended and completed, and pedagogical materials were developed. Over the two-year duration of the project, all of the tasks and subtasks outlined in the original project proposal have been completed. The Final Progress Report, which briefly describes actual project accomplishments versus the tasks/subtasks of the original project proposal, is included in Appendix A of this report. This report describes the scientific/technical aspects (hypotheses, research/testing, and findings) of six subprojects that investigated five common C&D materials. Table 1 summarizes the six subprojects, including the C&D material studied and the graduate student and the faculty advisor on each subproject.

  6. 12 CFR Appendixes A-B - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 5 2011-01-01 2011-01-01 false A Appendixes A-B Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY CAPITAL Regulatory Capital Requirements Appendixes A-B...

  7. 12 CFR Appendixes A-B - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false A Appendixes A-B Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY CAPITAL Regulatory Capital Requirements Appendixes...

  8. 12 CFR Appendixes A-B - [Reserved

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 6 2012-01-01 2012-01-01 false A Appendixes A-B Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY CAPITAL Regulatory Capital Requirements Appendixes A-B...

  9. 12 CFR Appendixes A-B - [Reserved

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 6 2014-01-01 2012-01-01 true A Appendixes A-B Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY CAPITAL Regulatory Capital Requirements Appendixes A-B...

  10. 12 CFR Appendixes A-B - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 6 2013-01-01 2012-01-01 true A Appendixes A-B Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY CAPITAL Regulatory Capital Requirements Appendixes A-B...

  11. Remedial Action Plan and site design for stabilization of the inactive uranium mill tailings site at Mexican Hat, Utah: Appendix E. Final report

    SciTech Connect

    1988-07-01

    This document provides Appendix E of the Remedial Action Plan (RAP) presented in 1988 for the stabilization of the inactive uranium mill tailings at the Mexican Hat, Utah site. The RAP was developed to serve a two- fold purpose. It presents the activities proposed by the Department of Energy (DOE) to accomplish long-term stabilization and control of the residual radioactive materials (RRM) from Monument Valley, Arizona, and Mexican Hat, Utah, at the Mexican Hat disposal site. It also serves to document the concurrence of both the Navajo Nation and the Nuclear Regulatory Commission (NRC) in the remedial action. This agreement, upon execution by the DOE and the Navajo Nation and concurrence by the NRC, becomes Appendix B of the Cooperative Agreement. The RAP has been structured to provide a comprehensive understanding of the remedial action proposed for the Monument Valley and Mexican Hat sites. It includes specific design and construction requirements for the remedial action.

  12. Catalog of infrared observations. Part 2: Appendixes

    NASA Technical Reports Server (NTRS)

    Gezari, Daniel Y.; Schmitz, Marion; Mead, Jaylee M.

    1987-01-01

    The Catalog of Infrared Observations (CIO) is a compilation of infrared astronomical observational data obtained from an extensive literature search of astronomical journals and major astronomical catalogs and surveys. The literature searches are complete for years 1965 to 1986. Supporting appendixes are published in this part. The appendices include an atlas of infrared source positions, two bibliographies of infrared literature upon which the search was based, and, keyed to the main Catalog listings (organized alphabetically by first author, and by date), an atlas of infrared spectral ranges, and IRAS data for the CIO sources. The complete CIO database is available to qualified users in printed microfiche and magnetic tape formats.

  13. Appendix C - Site-Specific Surgery Codes

    Cancer.gov

    Gum C03.0-C03.9, Floor of Mouth C04.0-C04.9, Palate C05.0-C05.9, Other Parts of Mouth C06.0-C06.9 APPENDIX C SITE-SPECIFIC SURGERY CODES January 1998 SEER Program Code Manual, 3rd Edition C-3 SURGERY OF PRIMARY SITE Codes 00 None; no cancer-directed surgery of primary site 10 Local tumor destruction, NOS (WITHOUT PATHOLOGY SPECIMEN) 11 Photodynamic therapy (PDT) 12 Electrocautery; fulguration (includes use of hot forceps for tumor destruction) 13 Cryosurgery 14 Laser No specimen sent to pathology from this surgical event.

  14. Weightless Environment Training Facility (WETF) materials coating evaluation, volume 2

    NASA Technical Reports Server (NTRS)

    1995-01-01

    This volume consists of Appendices A and B to the report on the Weightless Environment Training Facility Materials Coating Evaluation project. The project selected 10 coating systems to be evaluated in six separate exposure environments, and subject to three tests for physical properties. Appendix A holds the coating system, surface preparation, and application data. Appendix B holds the coating material infrared spectra.

  15. Appendix: Marketing and Student Recruitment Practices for Master's-Level Graduate Programs, 2012. Trends in Enrollment Management

    ERIC Educational Resources Information Center

    Noel-Levitz, Inc, 2012

    2012-01-01

    This paper presents the appendix to "Marketing and Student Recruitment Practices for Master's-Level Graduate Programs, 2012" report. Included in this appendix are: (1) Ratings of the primary practices measured in this study, displayed by institution type; (2) The practice of purchasing prospective student names and addresses; (3) Ratings of…

  16. 23 CFR Appendix C to Subpart A of... - Federal-Aid Highway Contractors Annual EEO Report (Form PR-1391)

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false Federal-Aid Highway Contractors Annual EEO Report (Form PR-1391) C Appendix C to Subpart A of Part 230 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF... Construction Contracts (Including Supportive Services) Pt. 230, Subpt. A, App. C Appendix C to Subpart A...

  17. Taking the Lead in Science Education: Forging Next-Generation Science Standards. International Science Benchmarking Report. Appendix

    ERIC Educational Resources Information Center

    Achieve, Inc., 2010

    2010-01-01

    This appendix accompanies the report "Taking the Lead in Science Education: Forging Next-Generation Science Standards. International Science Benchmarking Report," a study conducted by Achieve to compare the science standards of 10 countries. This appendix includes the following: (1) PISA and TIMSS Assessment Rankings; (2) Courses and Levels


  18. 12 CFR Appendix E to Part 334 - Interagency Guidelines Concerning the Accuracy and Integrity of Information Furnished to Consumer...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and Integrity of Information Furnished to Consumer Reporting Agencies E Appendix E to Part 334 Banks... CREDIT REPORTING Part 334, App. E Appendix E to Part 334—Interagency Guidelines Concerning the Accuracy... consumer's account or other relationship, including, for example: (i) Any transfer of an account (e.g.,...

  19. 12 CFR Appendix E to Part 41 - Interagency Guidelines Concerning the Accuracy and Integrity of Information Furnished to Consumer...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and Integrity of Information Furnished to Consumer Reporting Agencies E Appendix E to Part 41 Banks.... E Appendix E to Part 41—Interagency Guidelines Concerning the Accuracy and Integrity of Information... relationship, including, for example: (i) Any transfer of an account (e.g., by sale or assignment...

  20. 12 CFR Appendix E to Part 717 - Interagency Guidelines Concerning the Accuracy and Integrity of Information Furnished to Consumer...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and Integrity of Information Furnished to Consumer Reporting Agencies E Appendix E to Part 717 Banks... REPORTING Pt. 717, App. E Appendix E to Part 717—Interagency Guidelines Concerning the Accuracy and...'s account or other relationship, including, for example: (i) Any transfer of an account (e.g.,...

  1. 12 CFR Appendix E to Part 334 - Interagency Guidelines Concerning the Accuracy and Integrity of Information Furnished to Consumer...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and Integrity of Information Furnished to Consumer Reporting Agencies E Appendix E to Part 334 Banks... CREDIT REPORTING Pt. 334, App. E Appendix E to Part 334—Interagency Guidelines Concerning the Accuracy... consumer's account or other relationship, including, for example: (i) Any transfer of an account (e.g.,...

  2. 12 CFR Appendix E to Part 571 - Interagency Guidelines Concerning the Accuracy and Integrity of Information Furnished to Consumer...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and Integrity of Information Furnished to Consumer Reporting Agencies E Appendix E to Part 571 Banks..., App. E Appendix E to Part 571—Interagency Guidelines Concerning the Accuracy and Integrity of...'s account or other relationship, including, for example: (i) Any transfer of an account (e.g.,...

  3. 2 CFR Appendix Vii to Part 200 - States and Local Government and Indian Tribe Indirect Cost Proposals

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... distributed through the central service cost allocation plan (as described in Appendix V to Part 200—State... examples of indirect costs may include certain state/local-wide central service costs, general.... This Appendix does not apply to state public assistance agencies. These agencies should refer...

  4. 40 CFR Appendix Xiii to Part 266 - Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... are exempt mercury-bearing materials with less than 500 ppm of 40 CFR Part 261, appendix VIII organic constituents when generated by manufacturers or users of mercury or mercury products. 1. Activated carbon...

  5. 40 CFR Appendix Xiii to Part 266 - Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... are exempt mercury-bearing materials with less than 500 ppm of 40 CFR Part 261, appendix VIII organic... samples 11. K106 and other wastewater treatment plant sludge and filter cake 12. Mercury cell sump...

  6. 40 CFR Appendix Xiii to Part 266 - Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... are exempt mercury-bearing materials with less than 500 ppm of 40 CFR Part 261, appendix VIII organic constituents when generated by manufacturers or users of mercury or mercury products. 1. Activated carbon...

  7. 40 CFR Appendix Xiii to Part 266 - Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... are exempt mercury-bearing materials with less than 500 ppm of 40 CFR Part 261, appendix VIII organic constituents when generated by manufacturers or users of mercury or mercury products. 1. Activated carbon...

  8. 40 CFR Appendix Xiii to Part 266 - Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... are exempt mercury-bearing materials with less than 500 ppm of 40 CFR Part 261, appendix VIII organic constituents when generated by manufacturers or users of mercury or mercury products. 1. Activated carbon...

  9. MatProps: Material Properties Database and Associated Access Library

    SciTech Connect

    Durrenberger, J K; Becker, R C; Goto, D M; Neely, J R; Wallin, B K

    2007-08-13

    Coefficients for analytic constitutive and equation of state models (EOS), which are used by many hydro codes at LLNL, are currently stored in a legacy material database (Steinberg, UCRL-MA-106349). Parameters for numerous materials are available through this database, and include Steinberg-Guinan and Steinberg-Lund constitutive models for metals, JWL equations of state for high explosives, and Mie-Gruniesen equations of state for metals. These constitutive models are used in most of the simulations done by ASC codes today at Livermore. Analytic EOSs are also still used, but have been superseded in many cases by tabular representations in LEOS (http://leos.llnl.gov). Numerous advanced constitutive models have been developed and implemented into ASC codes over the past 20 years. These newer models have more physics and better representations of material strength properties than their predecessors, and therefore more model coefficients. However, a material database of these coefficients is not readily available. Therefore incorporating these coefficients with those of the legacy models into a portable database that could be shared amongst codes would be most welcome. The goal of this paper is to describe the MatProp effort at LLNL to create such a database and associated access library that could be used by codes throughout the DOE complex and beyond. We have written an initial version of the MatProp database and access library and our DOE/ASC code ALE3D (Nichols et. al., UCRL-MA-152204) is able to import information from the database. The database, a link to which exists on the Sourceforge server at LLNL, contains coefficients for many materials and models (see Appendix), and includes material parameters in the following categories--flow stress, shear modulus, strength, damage, and equation of state. Future versions of the Matprop database and access library will include the ability to read and write material descriptions that can be exchanged between codes. It will also include an ability to do unit changes, i.e. have the library return parameters in user-specified unit systems. In addition to these, additional material categories can be added (e.g., phase change kinetics, etc.). The Matprop database and access library is part of a larger set of tools used at LLNL for assessing material model behavior. One of these is MSlib, a shared constitutive material model library. Another is the Material Strength Database (MSD), which allows users to compare parameter fits for specific constitutive models to available experimental data. Together with Matprop, these tools create a suite of capabilities that provide state-of-the-art models and parameters for those models to integrated simulation codes. This document is broken into several appendices. Appendix A contains a code example to retrieve several material coefficients. Appendix B contains the API for the Matprop data access library. Appendix C contains a list of the material names and model types currently available in the Matprop database. Appendix D contains a list of the parameter names for the currently recognized model types. Appendix E contains a full xml description of the material Tantalum.

  10. 10 CFR 140.109 - Appendix I.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Appendix I. 140.109 Section 140.109 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) FINANCIAL PROTECTION REQUIREMENTS AND INDEMNITY AGREEMENTS Violations Appendixes to Part 140 § 140.109 Appendix I. Nuclear Energy Liability Insurance Association master policy no. __ Nuclear Energy Liability Insurance...

  11. 10 CFR 140.109 - Appendix I.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Appendix I. 140.109 Section 140.109 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) FINANCIAL PROTECTION REQUIREMENTS AND INDEMNITY AGREEMENTS Violations Appendixes to Part 140 § 140.109 Appendix I. Nuclear Energy Liability Insurance Association master policy no. __ Nuclear Energy Liability Insurance...

  12. The cecal appendix: one more immune component with a function disturbed by post-industrial culture.

    PubMed

    Laurin, Michel; Everett, Mary Lou; Parker, William

    2011-04-01

    This review assesses the current state of knowledge regarding the cecal appendix, its apparent function, and its evolution. The association of the cecal appendix with substantial amounts of immune tissue has long been taken as an indicator that the appendix may have some immune function. Recently, an improved understanding of the interactions between the normal gut flora and the immune system has led to the identification of the appendix as an apparent safe-house for normal gut bacteria. Further, a variety of observations related to the evolution and morphology of the appendix, including the identification of the structure as a "recurrent trait" in some clades, the presence of appendix-like structures in monotremes and some non-mammalian species, and consistent features of the cecal appendix such as its narrow diameter, provide direct support for an important function of the appendix. This bacterial safe-house, which is likely important in the event of diarrheal illness, is presumably of minimal importance to humans living with abundant nutritional resources, modern medicine and modern hygiene practices that include clean drinking water. Consistent with this idea, epidemiologic studies demonstrate that diarrheal illness is indeed a major source of selection pressure in developing countries but not in developed countries, whereas appendicitis shows the opposite trend, being associated with modern hygiene and medicine. The cecal appendix may thus be viewed as a part of the immune system that, like those immune compartments that cause allergy, is vital to life in a "natural" environment, but which is poorly suited to post-industrialized societies. PMID:21370495

  13. 40 CFR 63.7944 - How do I determine the maximum HAP vapor pressure of my remediation material?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .../Chemical Methods,” EPA Publication No. SW-846 or Method 25D in 40 CFR part 60, appendix A. (2) Analysis... pressure of the remediation material: (i) Method 25E in 40 CFR part 60 appendix A; (ii) Methods described... direct measurement by Method 25E in 40 CFR part 60 appendix A, as specified in paragraph (b) of...

  14. Waste-Management Education and Research Consortium (WERC) annual progress report, 1991--1992. Appendixes

    SciTech Connect

    Not Available

    1992-04-07

    This report contains the following appendices: Appendix A - Requirements for Undergraduate Level; Appendix B - Requirements for Graduate Level; Appendix C - Graduate Degree In Environmental Engineering; Appendix D - Non-degree Certificate Program; Appendix E - Curriculum for Associate Degree Program; Appendix F - Curriculum for NCC Program; Appendix G - Information 1991 Teleconference Series; Appendix H - Information on 1992 Teleconference Series; Appendix I - WERC interactive Television Courses; Appendix J - WERC Research Seminar Series; Appendix K - Sites for Hazardous/Radioactive Waste Management Series; Appendix L- Summary of Technology Development of the Second Year; Appendix M - List of Major Publications Resulting from WERC; Appendix N - Types of Equipment at WERC Laboratories.

  15. Advanced Materials Laboratory User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Orndoff, Evelyne

    2012-01-01

    Test process, milestones and inputs are unknowns to first-time users of the Advanced Materials Laboratory. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  16. 10 CFR Appendix F to Part 110 - Illustrative List of Laser-Based Enrichment Plant Equipment and Components Under NRC Export...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Illustrative List of Laser-Based Enrichment Plant Equipment and Components Under NRC Export Licensing Authority F Appendix F to Part 110 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Pt. 110, App. F Appendix F to Part 110—Illustrative List...

  17. 10 CFR Appendix A to Subpart A of... - Selected Provisions of the Atomic Energy Act of 1954, as Amended, Sec. 141 (42 U.S.C. 2161), Sec...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Amended, Sec. 141 (42 U.S.C. 2161), Sec. 145 (42 U.S.C. 2165), Sec. 161 (42 U.S.C. 2201) A Appendix A to Subpart A of Part 710 Energy DEPARTMENT OF ENERGY CRITERIA AND PROCEDURES FOR DETERMINING ELIGIBILITY FOR... Eligibility for Access to Classified Matter or Special Nuclear Material Pt. 710, Subpt. A, App. A Appendix...

  18. 10 CFR Appendix A to Subpart A of... - Selected Provisions of the Atomic Energy Act of 1954, as Amended, Sec. 141 (42 U.S.C. 2161), Sec...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Amended, Sec. 141 (42 U.S.C. 2161), Sec. 145 (42 U.S.C. 2165), Sec. 161 (42 U.S.C. 2201) A Appendix A to Subpart A of Part 710 Energy DEPARTMENT OF ENERGY CRITERIA AND PROCEDURES FOR DETERMINING ELIGIBILITY FOR... Eligibility for Access to Classified Matter or Special Nuclear Material Pt. 710, Subpt. A, App. A Appendix...

  19. 10 CFR Appendix A to Subpart A of... - Selected Provisions of the Atomic Energy Act of 1954, as Amended, Sec. 141 (42 U.S.C. 2161), Sec...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Amended, Sec. 141 (42 U.S.C. 2161), Sec. 145 (42 U.S.C. 2165), Sec. 161 (42 U.S.C. 2201) A Appendix A to Subpart A of Part 710 Energy DEPARTMENT OF ENERGY CRITERIA AND PROCEDURES FOR DETERMINING ELIGIBILITY FOR... Eligibility for Access to Classified Matter or Special Nuclear Material Pt. 710, Subpt. A, App. A Appendix...

  20. 10 CFR Appendix A to Subpart A of... - Selected Provisions of the Atomic Energy Act of 1954, as Amended, Sec. 141 (42 U.S.C. 2161), Sec...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Amended, Sec. 141 (42 U.S.C. 2161), Sec. 145 (42 U.S.C. 2165), Sec. 161 (42 U.S.C. 2201) A Appendix A to Subpart A of Part 710 Energy DEPARTMENT OF ENERGY CRITERIA AND PROCEDURES FOR DETERMINING ELIGIBILITY FOR... Eligibility for Access to Classified Matter or Special Nuclear Material Pt. 710, Subpt. A, App. A Appendix...

  1. 10 CFR Appendix F to Part 50 - Policy Relating to the Siting of Fuel Reprocessing Plants and Related Waste Management Facilities

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and Related Waste Management Facilities F Appendix F to Part 50 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND UTILIZATION FACILITIES Pt. 50, App. F Appendix F to Part 50—Policy.... The Department of Energy will take title to the radioactive waste material upon transfer to a...

  2. 10 CFR Appendix F to Part 50 - Policy Relating to the Siting of Fuel Reprocessing Plants and Related Waste Management Facilities

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and Related Waste Management Facilities F Appendix F to Part 50 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND UTILIZATION FACILITIES Pt. 50, App. F Appendix F to Part 50—Policy.... The Department of Energy will take title to the radioactive waste material upon transfer to a...

  3. 10 CFR Appendix E to Part 30 - Criteria Relating to Use of Financial Tests and Self-Guarantee For Providing Reasonable Assurance...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., Universities, and Hospitals E Appendix E to Part 30 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC LICENSING OF BYPRODUCT MATERIAL Pt. 30, App. E Appendix E to Part 30—Criteria Relating... licensee will set up and fund a trust in the amount of the current cost estimates for decommissioning....

  4. 10 CFR Appendix D to Part 30 - Criteria Relating to Use of Financial Tests and Self-Guarantee for Providing Reasonable Assurance...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... No Outstanding Rated Bonds D Appendix D to Part 30 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC LICENSING OF BYPRODUCT MATERIAL Pt. 30, App. D Appendix D to Part 30... for Decommissioning by Commercial Companies That Have No Outstanding Rated Bonds I. Introduction...

  5. 10 CFR Appendix C to Part 835 - Derived Air Concentration (DAC) for Workers From External Exposure During Immersion in a Cloud of...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Derived Air Concentration (DAC) for Workers From External Exposure During Immersion in a Cloud of Airborne Radioactive Material C Appendix C to Part 835 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Pt. 835, App. C Appendix C to Part 835—Derived Air Concentration (DAC) for Workers...

  6. 10 CFR Appendix C to Part 835 - Derived Air Concentration (DAC) for Workers From External Exposure During Immersion in a Cloud of...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Derived Air Concentration (DAC) for Workers From External Exposure During Immersion in a Cloud of Airborne Radioactive Material C Appendix C to Part 835 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Pt. 835, App. C Appendix C to Part 835—Derived Air Concentration (DAC) for Workers...

  7. Materials and Nondestructive Evaluation Laboratoriers: User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Schaschl, Leslie

    2011-01-01

    The Materials and Nondestructive Evaluation Laboratory process, milestones and inputs are unknowns to first-time users. The Materials and Nondestructive Evaluation Laboratory Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware developers. It is intended to assist their project engineering personnel in materials analysis planning and execution. Material covered includes a roadmap of the analysis process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, products, and inputs necessary to define scope of analysis, cost, and schedule are included as an appendix to the guide.

  8. 49 CFR Appendix H to Part 173 - Method of Testing for Sustained Combustibility

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Method of Testing for Sustained Combustibility H Appendix H to Part 173 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS...

  9. 49 CFR Appendix H to Part 173 - Method of Testing for Sustained Combustibility

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Method of Testing for Sustained Combustibility H Appendix H to Part 173 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS...

  10. 49 CFR Appendix D to Part 173 - Test Methods for Dynamite (Explosive, Blasting, Type A)

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Test Methods for Dynamite (Explosive, Blasting, Type A) D Appendix D to Part 173 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS...

  11. 47 CFR Appendix - Technical Appendix 2

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...), including, but not limited to:Integrated video display; Video or Audio recording or playback capability such...) Wireless (IEEE0802.11) Outputs (Audio) Equipment may process associated audio services described in Section 6.6 of A/54RF output may provide monaural audio for the selected audio channel RF output may...

  12. Methods of measurement for semiconductor materials, process control, and devices

    NASA Technical Reports Server (NTRS)

    Bullis, W. M. (Editor)

    1972-01-01

    Activities directed toward the development of methods of measurement for semiconductor materials, process control, and devices are described. Topics investigated include: measurements of transistor delay time; application of the infrared response technique to the study of radiation-damaged, lithium-drifted silicon detectors; and identification of a condition that minimizes wire flexure and reduces the failure rate of wire bonds in transistors and integrated circuits under slow thermal cycling conditions. Supplementary data concerning staff, standards committee activities, technical services, and publications are included as appendixes.

  13. 49 CFR Appendix - Editorial Note:

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 16084; 28 CFR § 0.66). The Assistant Attorney General, Land and Natural Resources Division, has further.... Editorial Note: For Federal Register citations affecting appendix A to part 1, see the List of CFR Sections... to part 1 of title 49, Code of Federal Regulations, 35 FR 17653, November 17, 1970, as...

  14. Pump apparatus including deconsolidator

    SciTech Connect

    Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

    2014-10-07

    A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

  15. 49 CFR Appendix A to Part 605 - Appendix A to Part 605

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Appendix A to Part 605 A Appendix A to Part 605 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SCHOOL BUS OPERATIONS Pt. 605, App. A Appendix A to Part 605 Comptroller General of the United States, Washington,...

  16. 12 CFR Appendix B to Subpart A of... - Appendix B to Subpart A of Part 327

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Appendix B to Subpart A of Part 327 B Appendix B to Subpart A of Part 327 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY ASSESSMENTS In General Pt. 327, Subpt. A, App. B Appendix B to Subpart A of...

  17. 12 CFR Appendix B to Subpart A of... - Appendix B to Subpart A of Part 327

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Appendix B to Subpart A of Part 327 B Appendix B to Subpart A of Part 327 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY ASSESSMENTS In General Pt. 327, Subpt. A, App. B Appendix B to Subpart A of...

  18. 14 CFR Appendix G to Part 151 - Appendix G to Part 151

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Appendix G to Part 151 G Appendix G to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. G Appendix G to Part 151 There is set forth below...

  19. 14 CFR Appendix G to Part 151 - Appendix G to Part 151

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Appendix G to Part 151 G Appendix G to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. G Appendix G to Part 151 There is set forth below...

  20. 14 CFR Appendix G to Part 151 - Appendix G to Part 151

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Appendix G to Part 151 G Appendix G to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. G Appendix G to Part 151 There is set forth below...

  1. 14 CFR Appendix G to Part 151 - Appendix G to Part 151

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Appendix G to Part 151 G Appendix G to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. G Appendix G to Part 151 There is set forth below...

  2. 30 CFR Appendix A to Subpart J of... - Appendix A to Subpart J of Part 75

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Appendix A to Subpart J of Part 75 A Appendix A to Subpart J of Part 75 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Medium-Voltage Alternating Current Circuits Pt. 75, Subpt. J, App. A Appendix A to Subpart J of Part...

  3. 30 CFR Appendix A to Subpart J of... - Appendix A to Subpart J of Part 75

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Appendix A to Subpart J of Part 75 A Appendix A to Subpart J of Part 75 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Medium-Voltage Alternating Current Circuits Pt. 75, Subpt. J, App. A Appendix A to Subpart J of Part...

  4. 30 CFR Appendix A to Subpart J of... - Appendix A to Subpart J of Part 75

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Appendix A to Subpart J of Part 75 A Appendix A to Subpart J of Part 75 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Medium-Voltage Alternating Current Circuits Pt. 75, Subpt. J, App. A Appendix A to Subpart J of Part...

  5. 30 CFR Appendix A to Subpart J of... - Appendix A to Subpart J of Part 75

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Appendix A to Subpart J of Part 75 A Appendix A to Subpart J of Part 75 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Medium-Voltage Alternating Current Circuits Pt. 75, Subpt. J, App. A Appendix A to Subpart J of Part...

  6. 14 CFR Appendix F to Part 151 - Appendix F to Part 151

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Appendix F to Part 151 F Appendix F to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. F Appendix F to Part 151 There is set forth below...

  7. 14 CFR Appendix F to Part 151 - Appendix F to Part 151

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Appendix F to Part 151 F Appendix F to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. F Appendix F to Part 151 There is set forth below...

  8. 14 CFR Appendix F to Part 151 - Appendix F to Part 151

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Appendix F to Part 151 F Appendix F to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. F Appendix F to Part 151 There is set forth below...

  9. 14 CFR Appendix F to Part 151 - Appendix F to Part 151

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Appendix F to Part 151 F Appendix F to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. F Appendix F to Part 151 There is set forth below...

  10. 36 CFR Appendix A to Part 14 - Appendix A to Part 14

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Appendix A to Part 14 A Appendix A to Part 14 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR RIGHTS-OF-WAY Pt. 14, App. A Appendix A to Part 14 Where necessary, these forms should be modified so...

  11. 13 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 113

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Appendix A to Subpart A of Part 113 A Appendix A to Subpart A of Part 113 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION... ADMINISTRATOR General Provisions Pt. 113, Subpart A, App. A Appendix A to Subpart A of Part 113 Name of...

  12. 36 CFR Appendix A to Part 907 - Appendix A to Part 907

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Appendix A to Part 907 A Appendix A to Part 907 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION ENVIRONMENTAL QUALITY Pt. 907, App. A Appendix A to Part 907 (a) Specific Corporation actions...

  13. 43 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 17

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Appendix A to Subpart A of Part 17 A Appendix A to Subpart A of Part 17 Public Lands: Interior Office of the Secretary of the Interior... Race, Color, or National Origin Pt. 17, Subpt. A, App. A Appendix A to Subpart A of Part 17...

  14. 14 CFR Appendix E to Part 25 - Appendix E to Part 25

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Appendix E to Part 25 E Appendix E to Part 25 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Pt. 25, App. E Appendix E to Part 25 I—Limited Weight Credit For Airplanes Equipped With...

  15. 48 CFR Appendix A to Part 1219 - Appendix A to Part 1219

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Appendix A to Part 1219 A Appendix A to Part 1219 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Pt. 1219, App. A Appendix A to Part 1219 Targeted industry categories* FPDS products and service code...

  16. 48 CFR Appendix A to Part 1219 - Appendix A to Part 1219

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Appendix A to Part 1219 A Appendix A to Part 1219 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Pt. 1219, App. A Appendix A to Part 1219 Targeted industry categories* FPDS products and service code...

  17. 14 CFR Appendix C to Part 25 - Appendix C to Part 25

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Appendix C to Part 25 C Appendix C to Part... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Pt. 25, App. C Appendix C to Part 25 Part I—Atmospheric....062 EC28SE91.063 (c) Takeoff maximum icing. The maximum intensity of atmospheric icing conditions...

  18. 24 CFR Appendix C to 24 Cfr Part 3400 - Appendix C to 24 CFR Part 3400

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Appendix C to 24 CFR Part 3400 C Appendix C to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. C Appendix C to 24 CFR Part...

  19. 14 CFR Appendix C to Part 25 - Appendix C to Part 25

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Appendix C to Part 25 C Appendix C to Part... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Pt. 25, App. C Appendix C to Part 25 Part I—Atmospheric....062 EC28SE91.063 (c) Takeoff maximum icing. The maximum intensity of atmospheric icing conditions...

  20. 13 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 113

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 13 Business Credit and Assistance 1 2014-01-01 2014-01-01 false Appendix A to Subpart A of Part 113 A Appendix A to Subpart A of Part 113 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION... ADMINISTRATOR General Provisions Pt. 113, Subpt. A, App. A Appendix A to Subpart A of Part 113 Name of...

  1. 36 CFR Appendix A to Part 14 - Appendix A to Part 14

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Appendix A to Part 14 A Appendix A to Part 14 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR RIGHTS-OF-WAY Pt. 14, App. A Appendix A to Part 14 Where necessary, these forms should be modified so...

  2. 29 CFR Appendix A to Part 32 - Appendix A to Part 32

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 1 2012-07-01 2012-07-01 false Appendix A to Part 32 A Appendix A to Part 32 Labor Office... RECEIVING FEDERAL FINANCIAL ASSISTANCE Pt. 32, App. A Appendix A to Part 32 Accommodations may take many... accommodations, the individual should be consulted as to particular needs. The following is a list of...

  3. 36 CFR Appendix A to Part 14 - Appendix A to Part 14

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Appendix A to Part 14 A Appendix A to Part 14 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR RIGHTS-OF-WAY Pt. 14, App. A Appendix A to Part 14 Where necessary, these forms should be modified so...

  4. 13 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 113

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false Appendix A to Subpart A of Part 113 A Appendix A to Subpart A of Part 113 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION... ADMINISTRATOR General Provisions Pt. 113, Subpt. A, App. A Appendix A to Subpart A of Part 113 Name of...

  5. 45 CFR Appendix A to Part 611 - Appendix A to Part 611

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 3 2014-10-01 2014-10-01 false Appendix A to Part 611 A Appendix A to Part 611 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION... CIVIL RIGHTS ACT OF 1964 Pt. 611, App. A Appendix A to Part 611 Statutory Provisions under which...

  6. 13 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 113

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Appendix A to Subpart A of Part 113 A Appendix A to Subpart A of Part 113 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION... ADMINISTRATOR General Provisions Pt. 113, Subpart A, App. A Appendix A to Subpart A of Part 113 Name of...

  7. 14 CFR Appendix A to Part 25 - Appendix A to Part 25

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Appendix A to Part 25 A Appendix A to Part 25 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Pt. 25, App. A Appendix A to Part 25 EC28SE91.050...

  8. 14 CFR Appendix B to Part 25 - Appendix B to Part 25

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Appendix B to Part 25 B Appendix B to Part 25 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Pt. 25, App. B Appendix B to Part 25 EC28SE91.055...

  9. 17 CFR Appendix A to 17 Cfr Part 32 - Appendix A to 17 CFR Part 32

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 17 Commodity and Securities Exchanges 1 2014-04-01 2014-04-01 false Appendix A to 17 CFR Part 32 A Appendix A to 17 CFR Part 32 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF COMMODITY OPTION TRANSACTIONS Pt. 32, App. A Appendix A to 17 CFR Part 32 ER27AP12.004...

  10. 49 CFR Appendix A to Part 605 - Appendix A to Part 605

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Appendix A to Part 605 A Appendix A to Part 605 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SCHOOL BUS OPERATIONS Pt. 605, App. A Appendix A to Part 605 Comptroller...

  11. 49 CFR Appendix A to Part 605 - Appendix A to Part 605

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Appendix A to Part 605 A Appendix A to Part 605 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SCHOOL BUS OPERATIONS Pt. 605, App. A Appendix A to Part 605 Comptroller...

  12. 14 CFR Appendix I to Part 151 - Appendix I to Part 151

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Appendix I to Part 151 I Appendix I to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. I Appendix I to Part 151 Number Subject AC...

  13. 14 CFR Appendix G to Part 151 - Appendix G to Part 151

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Appendix G to Part 151 G Appendix G to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. G Appendix G to Part 151 There is set forth below...

  14. 14 CFR Appendix E to Part 25 - Appendix E to Part 25

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Appendix E to Part 25 E Appendix E to Part 25 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Pt. 25, App. E Appendix E to Part 25 I—Limited...

  15. 48 CFR Appendix A to Part 1219 - Appendix A to Part 1219

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Appendix A to Part 1219 A Appendix A to Part 1219 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Pt. 1219, App. A Appendix A to Part 1219 Targeted industry...

  16. 24 CFR Appendix D to 24 Cfr Part 3400 - Appendix D to 24 CFR Part 3400

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Appendix D to 24 CFR Part 3400 D Appendix D to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. D Appendix D to 24 CFR Part...

  17. 14 CFR Appendix D to Part 151 - Appendix D to Part 151

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Appendix D to Part 151 D Appendix D to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. D Appendix D to Part 151 There is set forth below...

  18. 14 CFR Appendix D to Part 151 - Appendix D to Part 151

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Appendix D to Part 151 D Appendix D to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. D Appendix D to Part 151 There is set forth below...

  19. 24 CFR Appendix D to 24 Cfr Part 3400 - Appendix D to 24 CFR Part 3400

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Appendix D to 24 CFR Part 3400 D Appendix D to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. D Appendix D to 24 CFR Part...

  20. 30 CFR Appendix A to Subpart J of... - Appendix A to Subpart J of Part 75

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Appendix A to Subpart J of Part 75 A Appendix A to Subpart J of Part 75 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Medium-Voltage Alternating Current Circuits Pt. 75, Subpt. J, App. A Appendix A to Subpart J of Part...