Science.gov

Sample records for biomass district energy

  1. Characterization of selected application of biomass energy technologies and a solar district heating and cooling system

    SciTech Connect

    D'Alessio, Dr., Gregory J.; Blaunstein, Robert P.

    1980-09-01

    The following systems are discussed: energy self-sufficient farms, wood gasification, energy from high-yield silviculture farms, and solar district heating and cooling. System descriptions and environmental data are included for each one. (MHR)

  2. The Potential for Biomass District Energy Production in Port Graham, Alaska

    SciTech Connect

    Charles Sink, Chugachmiut; Keeryanne Leroux, EERC

    2008-05-08

    This project was a collaboration between The Energy & Environmental Research Center (EERC) and Chugachmiut – A Tribal organization Serving the Chugach Native People of Alaska and funded by the U.S. Department of Energy (DOE) Tribal Energy Program. It was conducted to determine the economic and technical feasibility for implementing a biomass energy system to service the Chugachmiut community of Port Graham, Alaska. The Port Graham tribe has been investigating opportunities to reduce energy costs and reliance on energy imports and support subsistence. The dramatic rise in the prices of petroleum fuels have been a hardship to the village of Port Graham, located on the Kenai Peninsula of Alaska. The Port Graham Village Council views the forest timber surrounding the village and the established salmon industry as potential resources for providing biomass energy power to the facilities in their community. Benefits of implementing a biomass fuel include reduced energy costs, energy independence, economic development, and environmental improvement. Fish oil–diesel blended fuel and indoor wood boilers are the most economical and technically viable options for biomass energy in the village of Port Graham. Sufficient regional biomass resources allow up to 50% in annual heating savings to the user, displacing up to 70% current diesel imports, with a simple payback of less than 3 years for an estimated capital investment under $300,000. Distributive energy options are also economically viable and would displace all imported diesel, albeit offering less savings potential and requiring greater capital. These include a large-scale wood combustion system to provide heat to the entire village, a wood gasification system for cogeneration of heat and power, and moderate outdoor wood furnaces providing heat to 3–4 homes or community buildings per furnace. Coordination of biomass procurement and delivery, ensuring resource reliability and technology acceptance, and arbitrating

  3. Biomass energy

    SciTech Connect

    Smil, V.

    1983-01-01

    This book offers a broad, interdisciplinary approach to assessing the factors that are key determinants to the use of biomass energies, stressing their limitations, complexities, uncertainties, links, and consequences. Considers photosynthesis, energy costs of nutrients, problems with monoculture, and the energy analysis of intensive tree plantations. Subjects are examined in terms of environmental and economic impact. Emphasizes the use and abuse of biomass energies in China, India, and Brazil. Topics include forests, trees for energy, crop residues, fuel crops, aquatic plants, and animal and human wastes. Recommended for environmental engineers and planners, and those involved in ecology, systematics, and forestry.

  4. Combined Municipal Solid Waste and biomass system optimization for district energy applications.

    PubMed

    Rentizelas, Athanasios A; Tolis, Athanasios I; Tatsiopoulos, Ilias P

    2014-01-01

    Municipal Solid Waste (MSW) disposal has been a controversial issue in many countries over the past years, due to disagreement among the various stakeholders on the waste management policies and technologies to be adopted. One of the ways of treating/disposing MSW is energy recovery, as waste is considered to contain a considerable amount of bio-waste and therefore can lead to renewable energy production. The overall efficiency can be very high in the cases of co-generation or tri-generation. In this paper a model is presented, aiming to support decision makers in issues relating to Municipal Solid Waste energy recovery. The idea of using more fuel sources, including MSW and agricultural residue biomass that may exist in a rural area, is explored. The model aims at optimizing the system specifications, such as the capacity of the base-load Waste-to-Energy facility, the capacity of the peak-load biomass boiler and the location of the facility. Furthermore, it defines the quantity of each potential fuel source that should be used annually, in order to maximize the financial yield of the investment. The results of an energy tri-generation case study application at a rural area of Greece, using mixed MSW and biomass, indicate positive financial yield of investment. In addition, a sensitivity analysis is performed on the effect of the most important parameters of the model on the optimum solution, pinpointing the parameters of interest rate, investment cost and heating oil price, as those requiring the attention of the decision makers. Finally, the sensitivity analysis is enhanced by a stochastic analysis to determine the effect of the volatility of parameters on the robustness of the model and the solution obtained. PMID:24140378

  5. Combined Municipal Solid Waste and biomass system optimization for district energy applications

    SciTech Connect

    Rentizelas, Athanasios A. Tolis, Athanasios I. Tatsiopoulos, Ilias P.

    2014-01-15

    Highlights: • Combined energy conversion of MSW and agricultural residue biomass is examined. • The model optimizes the financial yield of the investment. • Several system specifications are optimally defined by the optimization model. • The application to a case study in Greece shows positive financial yield. • The investment is mostly sensitive on the interest rate, the investment cost and the heating oil price. - Abstract: Municipal Solid Waste (MSW) disposal has been a controversial issue in many countries over the past years, due to disagreement among the various stakeholders on the waste management policies and technologies to be adopted. One of the ways of treating/disposing MSW is energy recovery, as waste is considered to contain a considerable amount of bio-waste and therefore can lead to renewable energy production. The overall efficiency can be very high in the cases of co-generation or tri-generation. In this paper a model is presented, aiming to support decision makers in issues relating to Municipal Solid Waste energy recovery. The idea of using more fuel sources, including MSW and agricultural residue biomass that may exist in a rural area, is explored. The model aims at optimizing the system specifications, such as the capacity of the base-load Waste-to-Energy facility, the capacity of the peak-load biomass boiler and the location of the facility. Furthermore, it defines the quantity of each potential fuel source that should be used annually, in order to maximize the financial yield of the investment. The results of an energy tri-generation case study application at a rural area of Greece, using mixed MSW and biomass, indicate positive financial yield of investment. In addition, a sensitivity analysis is performed on the effect of the most important parameters of the model on the optimum solution, pinpointing the parameters of interest rate, investment cost and heating oil price, as those requiring the attention of the decision makers

  6. Biomass Energy Research

    SciTech Connect

    Traylor, T.D.; Pitsenbarger, J.

    1996-03-01

    Biomass Energy Research announces on a bimonthly basis the current worldwide research and development (R&D) information available on biomass power systems, alternate feedstocks from biomass, and biofuels supply options.

  7. School District Energy Manual.

    ERIC Educational Resources Information Center

    Association of School Business Officials International, Reston, VA.

    This manual serves as an energy conservation reference and management guide for school districts. The School District Energy Program (SDEP) is designed to provide information and/or assistance to school administrators planning to implement a comprehensive energy management program. The manual consists of 15 parts. Part 1 describes the SDEP; Parts…

  8. Energy from Biomass.

    ERIC Educational Resources Information Center

    Carioca, J. O. B.; And Others

    1987-01-01

    Discusses how biomass in the form of fuelwood, crop residues, and animal dung can be converted into fuels such as biogas and ethanol to replace or supplement fossil fuels. Argues for future decentralized, integrated biomass energy development. (TW)

  9. Switchgrass for biomass energy

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Switchgrass (Panicum virgatum) is a native warm-season grass and is the model herbaceous perennial biomass energy feedstock for the USA. More than 75-years of experience confirm that switchgrass will be productive and sustainable on rain-fed marginally-productive cropland east of the 100th meridian....

  10. Northeast Regional Biomass Energy Program

    SciTech Connect

    O'Connell, R.A.

    1992-02-01

    The Northeast Regional Biomass Program (NRBP) is entering its ninth year of operation. The management and the objectives have virtually remained unchanged and are stated as follows. The program conducted by NRBP has three basic features: (1) a state grant component that provides funds (with a 50 percent matching requirement) to each of the states in the region to strengthen and integrate the work of state agencies involved in biomass energy; (2) a series of technical reports and studies in areas that have been identified as being of critical importance to the development of biomass energy in the region; and (3) a continuous long range planning component with heavy private sector involvement that helps to identify activities necessary to spur greater development and use of biomass energy in the Northeast.

  11. Biomass energies: resources, links, constraints

    SciTech Connect

    Smil, V.

    1983-01-01

    This book presents information on the following topics: radiation and photosynthesis; primary production and biomass; resources; wood for energy; silviculture; requirements and effects; crop residues; residues for energy conversion; sugar crops and grain; cassava; fuel crops; aquatic plants; freshwater plants; ocean algae; animal wastes; Chinese biogas generation; and ecodisasters.

  12. Biomass conversion processes for energy and fuels

    NASA Astrophysics Data System (ADS)

    Sofer, S. S.; Zaborsky, O. R.

    The book treats biomass sources, promising processes for the conversion of biomass into energy and fuels, and the technical and economic considerations in biomass conversion. Sources of biomass examined include crop residues and municipal, animal and industrial wastes, agricultural and forestry residues, aquatic biomass, marine biomass and silvicultural energy farms. Processes for biomass energy and fuel conversion by direct combustion (the Andco-Torrax system), thermochemical conversion (flash pyrolysis, carboxylolysis, pyrolysis, Purox process, gasification and syngas recycling) and biochemical conversion (anaerobic digestion, methanogenesis and ethanol fermentation) are discussed, and mass and energy balances are presented for each system.

  13. Fiscalini Farms Biomass Energy Project

    SciTech Connect

    William Stringfellow; Mary Kay Camarillo; Jeremy Hanlon; Michael Jue; Chelsea Spier

    2011-09-30

    In this final report describes and documents research that was conducted by the Ecological Engineering Research Program (EERP) at the University of the Pacific (Stockton, CA) under subcontract to Fiscalini Farms LP for work under the Assistance Agreement DE-EE0001895 'Measurement and Evaluation of a Dairy Anaerobic Digestion/Power Generation System' from the United States Department of Energy, National Energy Technology Laboratory. Fiscalini Farms is operating a 710 kW biomass-energy power plant that uses bio-methane, generated from plant biomass, cheese whey, and cattle manure via mesophilic anaerobic digestion, to produce electricity using an internal combustion engine. The primary objectives of the project were to document baseline conditions for the anaerobic digester and the combined heat and power (CHP) system used for the dairy-based biomass-energy production. The baseline condition of the plant was evaluated in the context of regulatory and economic constraints. In this final report, the operation of the plant between start-up in 2009 and operation in 2010 are documented and an interpretation of the technical data is provided. An economic analysis of the biomass energy system was previously completed (Appendix A) and the results from that study are discussed briefly in this report. Results from the start-up and first year of operation indicate that mesophilic anaerobic digestion of agricultural biomass, combined with an internal combustion engine, is a reliable source of alternative electrical production. A major advantage of biomass energy facilities located on dairy farms appears to be their inherent stability and ability to produce a consistent, 24 hour supply of electricity. However, technical analysis indicated that the Fiscalini Farms system was operating below capacity and that economic sustainability would be improved by increasing loading of feedstocks to the digester. Additional operational modifications, such as increased utilization of waste

  14. Energy production from biomass (Part 1): Overview of biomass.

    PubMed

    McKendry, Peter

    2002-05-01

    The use of renewable energy sources is becoming increasingly necessary, if we are to achieve the changes required to address the impacts of global warming. Biomass is the most common form of renewable energy, widely used in the third world but until recently, less so in the Western world. Latterly much attention has been focused on identifying suitable biomass species, which can provide high-energy outputs, to replace conventional fossil fuel energy sources. The type of biomass required is largely determined by the energy conversion process and the form in which the energy is required. In the first of three papers, the background to biomass production (in a European climate) and plant properties is examined. In the second paper, energy conversion technologies are reviewed, with emphasis on the production of a gaseous fuel to supplement the gas derived from the landfilling of organic wastes (landfill gas) and used in gas engines to generate electricity. The potential of a restored landfill site to act as a biomass source, providing fuel to supplement landfill gas-fuelled power stations, is examined, together with a comparison of the economics of power production from purpose-grown biomass versus waste-biomass. The third paper considers particular gasification technologies and their potential for biomass gasification. PMID:12058829

  15. CALLA ENERGY BIOMASS COFIRING PROJECT

    SciTech Connect

    Unknown

    2003-07-01

    The Calla Energy Biomass Project, to be located in Estill County, Kentucky is to be conducted in two phases. The objective of Phase I is to evaluate the technical and economic feasibility of cofiring biomass-based gasification fuel-gas in a power generation boiler. Waste coal fines are to be evaluated as the cofired fuel. The project is based on the use of commercially available technology for feeding and gas cleanup that would be suitable for deployment in municipal, large industrial and utility applications. Define a combustion system for the biomass gasification-based fuel-gas capable of stable, low-NOx combustion over the full range of gaseous fuel mixtures, with low carbon monoxide emissions and turndown capabilities suitable for large-scale power generation applications. The objective for Phase II is to design, install and demonstrate the combined gasification and combustion system in a large-scale, long-term cofiring operation to promote acceptance and utilization of indirect biomass cofiring technology for large-scale power generation applications. GTI received supplemental authorization A002 from DOE for additional work to be performed under Phase I that will further extend the performance period until the end of February 2003. The additional scope of work is for GTI to develop the gasification characteristics of selected feedstock for the project. To conduct this work, GTI assembles an existing ''mini-bench'' unit to perform the gasification tests. The results of the test will be used to confirm or if necessary update the process design completed in Phase Task 1 During this Performance Period work efforts focused on conducting tests of biomass feedstock samples on the 2 inch mini-bench gasifier. The gasification tests were completed. The GTI U-GAS model was used to check some of the early test results against the model predictions. Additional modeling will be completed to further verify the model predictions and actual results.

  16. CALLA ENERGY BIOMASS COFIRING PROJECT

    SciTech Connect

    Francis S. Lau

    2003-09-01

    The Calla Energy Biomass Project, to be located in Estill County, Kentucky is to be conducted in two phases. The objective of Phase I is to evaluate the technical and economic feasibility of cofiring biomass-based gasification fuel-gas in a power generation boiler. Natural gas and waste coal fines were evaluated as the cofired fuel. The project is based on the use of commercially available technology for feeding and gas cleanup that would be suitable for deployment in municipal, large industrial and utility applications. A design was developed for a cofiring combustion system for the biomass gasification-based fuel-gas capable of stable, low-NOx combustion over the full range of gaseous fuel mixtures in a power generation boiler, with low carbon monoxide emissions and turndown capabilities suitable for large-scale power generation applications. Following the preliminary design, GTI evaluated the gasification characteristics of selected feedstocks for the project. To conduct this work, GTI assembled an existing ''mini-bench'' unit to perform the gasification tests. The results of the test were used to confirm the process design completed in Phase Task 1. As a result of the testing and modeling effort, the selected biomass feedstocks gasified very well, with a carbon conversion of over 98% and individual gas component yields that matched the RENUGAS{reg_sign} model. As a result of this work, the facility appears very attractive from a commercial standpoint. Similar facilities can be profitable if they have access to low cost fuels and have attractive wholesale or retail electrical rates for electricity sales. The objective for Phase II is to design, install and demonstrate the combined gasification and combustion system in a large-scale, long-term cofiring operation to promote acceptance and utilization of indirect biomass cofiring technology for large-scale power generation applications. Phase II has not been approved for construction at this time.

  17. CALLA ENERGY BIOMASS COFIRING PROJECT

    SciTech Connect

    Unknown

    2002-12-31

    The Calla Energy Biomass Project, to be located in Estill County, Kentucky is to be conducted in two phases. The objective of Phase I is to evaluate the technical and economic feasibility of cofiring biomass-based gasification fuel-gas in a power generation boiler. Waste coal fines are to be evaluated as the cofired fuel. The project is based on the use of commercially available technology for feeding and gas cleanup that would be suitable for deployment in municipal, large industrial and utility applications. Define a combustion system for the biomass gasification-based fuel-gas capable of stable, low-NOx combustion over the full range of gaseous fuel mixtures, with low carbon monoxide emissions and turndown capabilities suitable for large-scale power generation applications. The objective for Phase II is to design, install and demonstrate the combined gasification and combustion system in a large-scale, long-term cofiring operation to promote acceptance and utilization of indirect biomass cofiring technology for large-scale power generation applications. GTI received supplemental authorization A002 from DOE for additional work to be performed under Phase I that will further extend the performance period until the end of February 2003. The additional scope of work is for GTI to develop the gasification characteristics of selected feedstock for the project. To conduct this work, GTI assembles an existing ''mini-bench'' unit to perform the gasification tests. The results of the test will be used to confirm or if necessary update the process design completed in Phase Task 1. During this Performance Period work efforts focused on conducting tests of biomass feedstock samples on the 2 inch mini-bench gasifier.

  18. CALLA ENERGY BIOMASS COFIRING PROJECT

    SciTech Connect

    Unknown

    2003-03-31

    The Calla Energy Biomass Project, to be located in Estill County, Kentucky is to be conducted in two phases. The objective of Phase I is to evaluate the technical and economic feasibility of cofiring biomass-based gasification fuel-gas in a power generation boiler. Waste coal fines are to be evaluated as the cofired fuel. The project is based on the use of commercially available technology for feeding and gas cleanup that would be suitable for deployment in municipal, large industrial and utility applications. Define a combustion system for the biomass gasification-based fuel-gas capable of stable, low-NOx combustion over the full range of gaseous fuel mixtures, with low carbon monoxide emissions and turndown capabilities suitable for large-scale power generation applications. The objective for Phase II is to design, install and demonstrate the combined gasification and combustion system in a large-scale, long-term cofiring operation to promote acceptance and utilization of indirect biomass cofiring technology for large-scale power generation applications. GTI received supplemental authorization A002 from DOE for additional work to be performed under Phase I that will further extend the performance period until the end of February 2003. The additional scope of work is for GTI to develop the gasification characteristics of selected feedstock for the project. To conduct this work, GTI assembles an existing ''mini-bench'' unit to perform the gasification tests. The results of the test will be used to confirm or if necessary update the process design completed in Phase Task 1 During this Performance Period work efforts focused on conducting tests of biomass feedstock samples on the 2 inch mini-bench gasifier. GTI determined that the mini-bench feed system could not handle ''raw'' biomass samples. These clogged the fuel feed screw. GTI determined that palletized samples would operate well in the mini-bench unit. Two sources of this material were identified that had

  19. Switchgrass for Biomass Energy: Status and Progress

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Switchgrass has been identified as a perennial biomass energy crop because it can produce high biomass yields on marginal land that is not suitable for grain crop production and provides many conservation benefits. The cellulose and hemi-cellulose of the biomass from switchgrass cell walls can be b...

  20. Estimates of US biomass energy consumption 1992

    SciTech Connect

    Not Available

    1994-05-06

    This report is the seventh in a series of publications developed by the Energy Information Administration (EIA) to quantify the biomass-derived primary energy used by the US economy. It presents estimates of 1991 and 1992 consumption. The objective of this report is to provide updated estimates of biomass energy consumption for use by Congress, Federal and State agencies, biomass producers and end-use sectors, and the public at large.

  1. Estimates of US biomass energy consumption 1992

    NASA Astrophysics Data System (ADS)

    1994-05-01

    This report is the seventh in a series of publications developed by the Energy Information Administration (EIA) to quantify the biomass-derived primary energy used by the U.S. economy. It presents estimates of 1991 and 1992 consumption. The objective of this report is to provide updated estimates of biomass energy consumption for use by Congress, Federal and State agencies, biomass producers and end-use sectors, and the public at large.

  2. Biomass energy systems and the environment

    NASA Astrophysics Data System (ADS)

    Braunstein, H. M.; Kanciruk, P.; Roop, R. D.; Sharples, F. E.; Tatum, J. S.; Oakes, K. M.

    The technology, resources, applied, and experimental features of biomass energy resources are explored, with an emphasis on environmental and social implications of large-scale biomass development. The existing land and water based biomass resource is described in terms of available energy, ecological concerns, agricultural crops, livestock production, freshwater systems, and ocean systems. Attention is given to proposed systems of biomass energy production from forestry and silviculture, agricultural crops, livestock wastes, and freshwater and ocean systems. A survey is made of various biomass materials, techniques for conversion to gas, liquid fuels, or for direct combustion, and impacts of large-scale biomass production and harvest are examined. Particular note is made of the effects of scaling biomass conversion systems, including near- and long-term applications, and ethics and aesthetic concerns.

  3. Biomass energy conversion in Hawaii

    NASA Astrophysics Data System (ADS)

    Ritschard, R. L.; Ghirardi, A.

    1981-06-01

    Materials and processes for producing liquid fuels from biomass are discussed. Direct combustion of biomass is discussed. The use of sugar industry products, tree crops, municipal solid wastes, and other biomass resources is discussed, as well as the environmental impacts of direct combustion systems.

  4. Influence of biomass cofiring on the optimal coefficient of the cogeneration share in a district heating system

    NASA Astrophysics Data System (ADS)

    Ziębik, Andrzej; Gładysz, Paweł

    2014-03-01

    The paper presents a modified algorithm for choosing the optimal coefficient of the share of cogeneration in district heating systems taking into account additional benefits concerning the promotion of highefficiency cogeneration and biomass cofiring. The optimal coefficient of the share of cogeneration depends first of all on the share of the heat required for preparing the hot tap water. The final result of investigations is an empirical equation describing the influence of the ratio of the heat flux for the production of hot tap water to the maximum flux for space heating and ventilation, as well as the share of chemical energy of biomass in the fuel mixture on the optimal value of the share of cogeneration in district heating systems. The approach presented in the paper may be applied both in back-pressure combined heat and power (CHP) plants and in extraction-condensing CHP plants.

  5. Biomass Energy Data Book, 2011, Edition 4

    DOE Data Explorer

    Wright, L.; Boundy, B.; Diegel, S. W.; Davis, S. C.

    The Biomass Energy Data Book is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Biomass Program in the Energy Efficiency and Renewable Energy (EERE) program of the Department of Energy (DOE). Designed for use as a convenient reference, the book represents an assembly and display of statistics and information that characterize the biomass industry, from the production of biomass feedstocks to their end use, including discussions on sustainability. This is the fourth edition of the Biomass Energy Data Book which is only available online in electronic format. There are five main sections to this book. The first section is an introduction which provides an overview of biomass resources and consumption. Following the introduction to biomass, is a section on biofuels which covers ethanol, biodiesel and bio-oil. The biopower section focuses on the use of biomass for electrical power generation and heating. The fourth section is on the developing area of biorefineries, and the fifth section covers feedstocks that are produced and used in the biomass industry. The sources used represent the latest available data. There are also four appendices which include frequently needed conversion factors, a table of selected biomass feedstock characteristics, and discussions on sustainability.

  6. Biomass Energy Data Book: Edition 4

    SciTech Connect

    Boundy, Robert Gary; Diegel, Susan W; Wright, Lynn L; Davis, Stacy Cagle

    2011-12-01

    The Biomass Energy Data Book is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Biomass Program in the Energy Efficiency and Renewable Energy (EERE) program of the Department of Energy (DOE). Designed for use as a convenient reference, the book represents an assembly and display of statistics and information that characterize the biomass industry, from the production of biomass feedstocks to their end use, including discussions on sustainability. This is the fourth edition of the Biomass Energy Data Book which is only available online in electronic format. There are five main sections to this book. The first section is an introduction which provides an overview of biomass resources and consumption. Following the introduction to biomass, is a section on biofuels which covers ethanol, biodiesel and bio-oil. The biopower section focuses on the use of biomass for electrical power generation and heating. The fourth section is on the developing area of biorefineries, and the fifth section covers feedstocks that are produced and used in the biomass industry. The sources used represent the latest available data. There are also two appendices which include frequently needed conversion factors, a table of selected biomass feedstock characteristics, and discussions on sustainability. A glossary of terms and a list of acronyms are also included for the reader's convenience.

  7. Biomass Energy Data Book: Edition 2

    SciTech Connect

    Wright, Lynn L; Boundy, Robert Gary; Badger, Philip C; Perlack, Robert D; Davis, Stacy Cagle

    2009-12-01

    The Biomass Energy Data Book is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Biomass Program in the Energy Efficiency and Renewable Energy (EERE) program of the Department of Energy (DOE). Designed for use as a convenient reference, the book represents an assembly and display of statistics and information that characterize the biomass industry, from the production of biomass feedstocks to their end use, including discussions on sustainability. This is the second edition of the Biomass Energy Data Book which is only available online in electronic format. There are five main sections to this book. The first section is an introduction which provides an overview of biomass resources and consumption. Following the introduction to biomass, is a section on biofuels which covers ethanol, biodiesel and bio-oil. The biopower section focuses on the use of biomass for electrical power generation and heating. The fourth section is on the developing area of biorefineries, and the fifth section covers feedstocks that are produced and used in the biomass industry. The sources used represent the latest available data. There are also four appendices which include frequently needed conversion factors, a table of selected biomass feedstock characteristics, assumptions for selected tables and figures, and discussions on sustainability. A glossary of terms and a list of acronyms are also included for the reader's convenience.

  8. Biomass Energy Data Book: Edition 3

    SciTech Connect

    Boundy, Robert Gary; Davis, Stacy Cagle

    2010-12-01

    The Biomass Energy Data Book is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Biomass Program in the Energy Efficiency and Renewable Energy (EERE) program of the Department of Energy (DOE). Designed for use as a convenient reference, the book represents an assembly and display of statistics and information that characterize the biomass industry, from the production of biomass feedstocks to their end use, including discussions on sustainability. This is the third edition of the Biomass Energy Data Book which is only available online in electronic format. There are five main sections to this book. The first section is an introduction which provides an overview of biomass resources and consumption. Following the introduction to biomass, is a section on biofuels which covers ethanol, biodiesel and bio-oil. The biopower section focuses on the use of biomass for electrical power generation and heating. The fourth section is on the developing area of biorefineries, and the fifth section covers feedstocks that are produced and used in the biomass industry. The sources used represent the latest available data. There are also four appendices which include frequently needed conversion factors, a table of selected biomass feedstock characteristics, and discussions on sustainability. A glossary of terms and a list of acronyms are also included for the reader's convenience.

  9. Biomass Energy Data Book: Edition 1

    SciTech Connect

    Wright, Lynn L; Boundy, Robert Gary; Perlack, Robert D; Davis, Stacy Cagle; Saulsbury, Bo

    2006-09-01

    The Biomass Energy Data Book is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Office of the Biomass Program and the Office of Planning, Budget and Analysis in the Department of Energy's Energy Efficiency and Renewable Energy (EERE) program. Designed for use as a desk-top reference, the book represents an assembly and display of statistics and information that characterize the biomass industry, from the production of biomass feedstocks to their end use. This is the first edition of the Biomass Energy Data Book and is currently only available online in electronic format. There are five main sections to this book. The first section is an introduction which provides an overview of biomass resources and consumption. Following the introduction to biomass is a section on biofuels which covers ethanol, biodiesel and BioOil. The biopower section focuses on the use of biomass for electrical power generation and heating. The fourth section is about the developing area of biorefineries, and the fifth section covers feedstocks that are produced and used in the biomass industry. The sources used represent the latest available data. There are also three appendices which include measures of conversions, biomass characteristics and assumptions for selected tables and figures. A glossary of terms and a list of acronyms are also included for the reader's convenience.

  10. Energy Management. A Guide for School Districts.

    ERIC Educational Resources Information Center

    Wisconsin Association of School Boards, Winneconne.

    A successful energy management program in a single school or a school district requires an energy audit or survey. The audit identifies how much energy is being consumed, as well as where it is going. Furthermore, it shows opportunities for energy conservation. The walk-through energy conservation survey is the method that has the best prospect…

  11. Agriculture, land use, and commercial biomass energy

    SciTech Connect

    Edmonds, J.A.; Wise, M.A.; Sands, R.D.; Brown, R.A.; Kheshgi, H.

    1996-06-01

    In this paper we have considered commercial biomass energy in the context of overall agriculture and land-use change. We have described a model of energy, agriculture, and land-use and employed that model to examine the implications of commercial biomass energy or both energy sector and land-use change carbon emissions. In general we find that the introduction of biomass energy has a negative effect on the extent of unmanaged ecosystems. Commercial biomass introduces a major new land use which raises land rental rates, and provides an incentive to bring more land into production, increasing the rate of incursion into unmanaged ecosystems. But while the emergence of a commercial biomass industry may increase land-use change emissions, the overall effect is strongly to reduce total anthropogenic carbon emissions. Further, the higher the rate of commercial biomass energy productivity, the lower net emissions. Higher commercial biomass energy productivity, while leading to higher land-use change emissions, has a far stronger effect on fossil fuel carbon emissions. Highly productive and inexpensive commercial biomass energy technologies appear to have a substantial depressing effect on total anthropogenic carbon emissions, though their introduction raises the rental rate on land, providing incentives for greater rates of deforestation than in the reference case.

  12. Biomass District Heat System for Interior Rural Alaska Villages

    SciTech Connect

    Wall, William A.; Parker, Charles R.

    2014-09-01

    Alaska Village Initiatives (AVI) from the outset of the project had a goal of developing an integrated village approach to biomass in Rural Alaskan villages. A successful biomass project had to be ecologically, socially/culturally and economically viable and sustainable. Although many agencies were supportive of biomass programs in villages none had the capacity to deal effectively with developing all of the tools necessary to build a complete integrated program. AVI had a sharp learning curve as well. By the end of the project with all the completed tasks, AVI developed the tools and understanding to connect all of the dots of an integrated village based program. These included initially developing a feasibility model that created the capacity to optimize a biomass system in a village. AVI intent was to develop all aspects or components of a fully integrated biomass program for a village. This meant understand the forest resource and developing a sustainable harvest system that included the “right sized” harvest equipment for the scale of the project. Developing a training program for harvesting and managing the forest for regeneration. Making sure the type, quality, and delivery system matched the needs of the type of boiler or boilers to be installed. AVI intended for each biomass program to be of the scale that would create jobs and a sustainable business.

  13. Energy management in Louisiana's public school districts

    SciTech Connect

    Acosta, D.T.

    1993-01-01

    Revenues for public education are declining and school budgets are being evaluated for ways to cut waste. The maintenance and operations budget often falls victim to the budget ax as maintenance on equipment and buildings is deferred. It may be that as a result of the deferred maintenance, school districts are actually spending more on maintenance and operations and energy than before. This study sought to determine the status of energy use in Louisiana's 66 public school districts and to determine the need for an energy management education program in those districts. Data for the 1991-1992 school year were collected using a mailed questionnaire from 55 of the 66 public school distrincts. Intensive non-response follow-up procedures were instituted to obtain a complete profile of the existing energy expenditure situation in the state's public school districts. Per square foot expenditures for energy were calculated for the 55 school districts that responded. A per student expenditure for energy was calculated for all 66 school districts. Per square foot and per student expenditures for energy and for maintenance and operations were compared to the state average and to the southern region average. The relationship between per student and per square foot expenditures was determined. The relationship between maintenance and operations and energy was also examined. School districts within the state were prioritized in order of need for an energy management program. Respondents rated 14 energy-related concepts as to their perceived importance for inclusion in an educational program on energy management for school maintenance and operations personnel. Findings indicate that a wide variation of per student and per square foot expenditures for energy and maintenance and operations exists within the state. No relationship was found between energy expenditures and maintenance and operations expenditures.

  14. Energy biomass characteristics of chosen plants

    NASA Astrophysics Data System (ADS)

    Szyszlak-Bargłowicz, J.; Zając, G.; Piekarski, W.

    2012-04-01

    The chosen energy plants species: willow, mallow and Miscanthus are presented. Result of analysis of combustion heat and heating value of these species biomass indicate on possibility of their utilization as fuel for combustion and energy and heat production.

  15. Environmental implications of increased biomass energy use

    SciTech Connect

    Miles, T.R. Sr.; Miles, T.R. Jr. , Portland, OR )

    1992-03-01

    This study reviews the environmental implications of continued and increased use of biomass for energy to determine what concerns have been and need to be addressed and to establish some guidelines for developing future resources and technologies. Although renewable biomass energy is perceived as environmentally desirable compared with fossil fuels, the environmental impact of increased biomass use needs to be identified and recognized. Industries and utilities evaluating the potential to convert biomass to heat, electricity, and transportation fuels must consider whether the resource is reliable and abundant, and whether biomass production and conversion is environmentally preferred. A broad range of studies and events in the United States were reviewed to assess the inventory of forest, agricultural, and urban biomass fuels; characterize biomass fuel types, their occurrence, and their suitability; describe regulatory and environmental effects on the availability and use of biomass for energy; and identify areas for further study. The following sections address resource, environmental, and policy needs. Several specific actions are recommended for utilities, nonutility power generators, and public agencies.

  16. What Energy Deregulation Means for Your District.

    ERIC Educational Resources Information Center

    Costello, Richard J.

    1999-01-01

    Provides advice on how school districts might reduce energy costs in an era of electric industry deregulation. The competitive environment is described along with suggestions about joining purchasing groups to achieve pricing discounts. Final comments reveal the importance of energy contract negotiation. (GR)

  17. Michigan School District Buys Energy Management System.

    ERIC Educational Resources Information Center

    Technological Horizons in Education, 1982

    1982-01-01

    With the aid of a federal grant for energy conservation, the Warren Consolidated School System (Michigan) will purchase a Margaux 6400 Building Management system to manage energy usage in 35 district buildings. Reasons for selecting the system and system capabilities are briefly discussed. (Author/JN)

  18. Biomass energy systems program summary

    SciTech Connect

    1980-07-01

    Research programs in biomass which were funded by the US DOE during fiscal year 1978 are listed in this program summary. The conversion technologies and their applications have been grouped into program elements according to the time frame in which they are expected to enter the commercial market. (DMC)

  19. Biomass energy analysis for crop dehydration

    SciTech Connect

    Whittier, J.P.; Haase, S.G.; Quinn, M.W.

    1994-12-31

    In 1994, an agricultural processing facility was constructed in southern New Mexico for spice and herb dehydration. Annual operational costs are dominated by energy costs, due primarily to the energy intensity of dehydration. A feasibility study was performed to determine whether the use of biomass resources as a feedstock for a cogeneration system would be an economical option. The project location allowed access to unusual biomass feedstocks including cotton gin trash, pecan shells and in-house residues. A resource assessment of the immediate project area determined that approximately 120,000 bone dry tons of biomass feedstocks are available annually. Technology characterization for the plant energy requirements indicated gasification systems offer fuel flexibility advantages over combustion systems although vendor support and commercial experience are limited. Regulatory siting considerations introduce a level of uncertainty because of a lack of a precedent in New Mexico for gasification technology and because vendors of commercial gasifiers have little experience operating such a facility nor gathering emission data. A public opinion survey indicated considerable support for renewable energy use and biomass energy utilization. However, the public opinion survey also revealed limited knowledge of biomass technologies and concerns regarding siting of a biomass facility within the geographic area. The economic analysis conducted for the study is based on equipment vendor quotations, and indicates there will be difficulty competing with current prices of natural gas.

  20. CALLA ENERGY BIOMASS COFIRING PROJECT

    SciTech Connect

    Unknown

    2001-01-01

    This project is to be conducted in two phases. The objective of Phase I is to evaluate the technical and economic feasibility of cofiring biomass-based gasification fuel-gas in a power generation boiler. Waste coal fines are to be evaluated as the cofired fuel. The project is based on the use of commercially available technology for feeding and gas cleanup that would be suitable for deployment in municipal, large industrial and utility applications. Define a combustion system for the biomass gasification-based fuel-gas capable of stable, low-NOx combustion over the full range of gaseous fuel mixtures, with low carbon monoxide emissions and turndown capabilities suitable for large-scale power generation applications. The objective for Phase II is to Design, install and demonstrate the combined gasification and combustion system in a large-scale, long-term cofiring operation to promote acceptance and utilization of indirect biomass cofiring technology for large-scale power generation applications.

  1. Implementing District Energy Systems: Municipal Approaches To Overcoming Barriers

    NASA Astrophysics Data System (ADS)

    Simpson, Kevin George

    Climate change and energy security are issues facing municipalities throughout the world. Efficient, resilient, sustainable, community-based energy systems, such as district energy systems (DES), fuelled mostly by renewables, are an important tool for addressing both climate change and energy security at the municipal level. In spite of their benefits, DES are not widely adopted in Canada (CDEA, 2011). This is due to the complex nature of the barriers which project proponents face. This thesis examines the experience of the City of Prince George in adopting and implementing the Downtown DES. Using a case study methodology, data was collected through a review of relevant municipal documents and a series of semi-structured, open-ended interviews. A thematic analysis revealed unexpected barriers related to lack of adequate public consultation and negative perceptions regarding biomass as a fuel for the DES. These `lessons learned' were then developed into recommendations for other municipalities considering DES.

  2. Physical availability of tree biomass for energy

    SciTech Connect

    Bones, J.T.; Wharton, E.H.

    1983-06-01

    The physical availability of tree biomass for energy is discussed. But first a profile of the US timberland is drawn. Land area, tree volume--by region, species group, and class of timber--and ownership of the land are calculated. Though the West clearly has the greatest volume, the North and the Southeast, with more hardwood, and considerably greater private ownership of land, are more important for wood energy. Wood manufacturing residues, logging residues, and byproducts of timber product harvesting are the major sources for tree biomass energy.

  3. Physical availability of tree biomass for energy

    SciTech Connect

    Bones, J.T.; Wharton, E.H.

    1983-06-01

    The physical availability of tree biomass for energy is discussed. But first a profile of the US timberland is drawn. Land area, tree volume--by region, species group, and class of timber--and ownership of the land are calculated. Though the west clearly has the greatest volume, the North and the Southeast, with more hardwood, and considerably greater private ownership of land, are more important for wood energy. Wood manufacturing residues, logging residues, and byproducts of timber product harvesting are the major sources for tree biomass energy.

  4. Biomass energy analysis for crop dehydration

    SciTech Connect

    Whittier, J.P.; Haase, S.G.; Quinn, M.W.; Zachritz, W.; Lansford, R.; Swanson, D.

    1995-06-01

    In 1994, an agricultural processing facility began constructing a new spice and herb dehydration facility in southern New Mexico. Because of the considerable energy intensity of the dehydration operation, management of energy costs is of special concern to the facility. Biomass energy conversion offers the potential for firms to reduce annual operating costs-especially firms with access to low-cost resources. Because the selected facility produces a biomass by-product as a result of its dehydration operation, it is appropriate to explore the technical, regulatory, institutional and economic conditions that affect the successful utilization of biomass resources. The facility is characterized as a small-scale installation, relative to other energy users. In this context, small-scale represents less than 100 million Btu per hour of thermal load and less than 1 MWe of electrical load. However, the projected annual energy bill is approximately $1.1 million and represents a significant portion of operational costs for the firm. For this study, the biomass resources in southern New Mexico and western Texas are detailed. Annual supplies of various biomass resources (i.e., wood chips, pecan shells, discarded tires and cotton gin trash) were inventoried. Further, delivered costs are projected for each of the resource forms. A technical assessment for the small-scale gasification and combustion systems is presented.

  5. A sustainable legume biomass energy farming system

    SciTech Connect

    Neathery, J.; Rubel, A.; Stencel, J.; Collins, M.

    1996-12-31

    Before environmentally sensitive areas are converted to biomass energy production, the production, the potential for sustainability of such systems must be assessed. The focus has been on woody or grass crops because of their high potential yields; however, yield sustainability is dependent on the application of fertilizer and lining materials, which in turn contribute to large costs. Growing legumes or mixtures of legumes with grasses could lower or alleviate the need for nitrate fertilizers. The incorporation of legumes into energy cropping systems could: (1) add soil organic matter; (2) introduce biologically fixed N; (3) improve soil structure and texture; (4) reduce soil erosion; (5) reduce production costs; and (6) decrease nitrate run-off in surface waters. Through the {open_quotes}rotation effect{close_quotes}, legumes cause increases in yield of subsequent non-legume crops beyond that accounted for by biologically-fixed N alone. In this paper, we describe a biomass energy system combining legume and grass biomass energy with fertilizer production from these same materials. Preliminary agronomic and engineering assessments for this type of biomass system are presented. The technologies needed to integrate nitrate production with legume energy farming and energy production through legume energy conversion are identified.

  6. School District Energy Conservation Activities. R-96-J-2.

    ERIC Educational Resources Information Center

    New York State Office of the Comptroller, Albany. Div. of Management Audit.

    To help New York's State Department of Education assess public school districts' energy conservation activities, the results of an audit of school districts' energy conservation activities are presented. The audit shows that most school districts have made some efforts toward energy conservation and that the Department does provide some assistance…

  7. Quantifying the Carbon Intensity of Biomass Energy

    NASA Astrophysics Data System (ADS)

    Hodson, E. L.; Wise, M.; Clarke, L.; McJeon, H.; Mignone, B.

    2012-12-01

    Regulatory agencies at the national and regional level have recognized the importance of quantitative information about greenhouse gas emissions from biomass used in transportation fuels or in electricity generation. For example, in the recently enacted California Low-Carbon Fuel Standard, the California Air Resources Board conducted a comprehensive study to determine an appropriate methodology for setting carbon intensities for biomass-derived transportation fuels. Furthermore, the U.S. Environmental Protection Agency is currently conducting a multi-year review to develop a methodology for estimating biogenic carbon dioxide (CO2) emissions from stationary sources. Our study develops and explores a methodology to compute carbon emission intensities (CIs) per unit of biomass energy, which is a metric that could be used to inform future policy development exercises. To compute CIs for biomass, we use the Global Change Assessment Model (GCAM), which is an integrated assessment model that represents global energy, agriculture, land and physical climate systems with regional, sectoral, and technological detail. The GCAM land use and land cover component includes both managed and unmanaged land cover categories such as food crop production, forest products, and various non-commercial land uses, and it is subdivided into 151 global land regions (wiki.umd.edu/gcam), ten of which are located in the U.S. To illustrate a range of values for different biomass resources, we use GCAM to compute CIs for a variety of biomass crops grown in different land regions of the U.S. We investigate differences in emissions for biomass crops such as switchgrass, miscanthus and willow. Specifically, we use GCAM to compute global carbon emissions from the land use change caused by a marginal increase in the amount of biomass crop grown in a specific model region. Thus, we are able to explore how land use change emissions vary by the type and location of biomass crop grown in the U.S. Direct

  8. Biomass resource potential using energy crops

    SciTech Connect

    Wright, L.L.; Cushman, J.H.; Martin, S.A.

    1993-09-01

    Biomass energy crops can provide a significant and environmentally beneficial source of renewable energy feedstocks for the future. They can revitalize the agricultural sector of the US economy by providing profitable uses for marginal cropland. Energy crops include fast-growing trees, perennial grasses, and annual grasses, all capable of collecting solar energy and storing it as cellulosic compounds for several months to several years. Once solar energy is thus captured, it can be converted by means of currently available technologies to a wide variety of energy products such as electricity, heat, liquid transportation fuels, and gases. Experimental results from field trials have generated optimism that selected and improved energy crops, established on cropland with moderate limitations for crop production, have the potential for producing high yields. Both trees and grasses, under very good growing conditions, have produced average annual yields of 20 to 40 dry Mg ha{sup {minus}1} year{sup {minus}1}. Sorghum has shown especially high yields in the Midwest. Hybrids between sugar cane and its wild relatives, called energy cane, have yielded as much as 50 dry Mg ha{sup {minus}1} year{sup {minus}1} in Florida. These experimental results demonstrate that some species have the genetic potential for very rapid growth rates. New wood energy crop systems developed by the Department of Energy`s Biofuels Feedstock Development Program offer, at a minimum, a 100% increase in biomass production rates over the 2 to 4 Mg ha{sup {minus}1} year{sup {minus}1} of dry leafless woody biomass produced by most natural forest systems. Experimental data indicate that short rotation wood crops established on cropland with moderate limitations are capable of producing biomass yields of 8--20 dry Mg ha{sup {minus}1} year{sup {minus}1} with a present average about 11 dry Mg ha{sup {minus}1} year{sup {minus}1} on typical cropland sites.

  9. Energy from biomass and wastes: 1982 update

    SciTech Connect

    Klass, D.L.

    1983-01-01

    Although federal support of research to develop energy from biomass and wastes continued to decrease in 1982, other sources of funding are taking up some of the slack. The contribution of energy from biomass and wastes to US primary energy consumption has increased to about 2.7 quads or 3.5% of total consumption and is projected to grow to about 3.5 quads by 1985. A reassessment of future climatic changes because of the greenhouse effect has not found any new results that require revision of the first assessment conducted in 1979. It is therefore apropos to begin to incorporate methodologies into world energy and biomass management that take this effect into account before any adverse changes begin to occur. Extensive research programs have continued on biomass production for energy applications and on the gasification and liquefaction of biomass and wastes for fuels, energy, and chemicals. Commercialization of this technology appears to be increasing at a higher rate, particularly for combustion of wood, wood wastes, and municipal solid wastes for heat, steam, and electric production; anaerobic digestion of industrial wastes for combined waste disposal and methane production; and use of fermentation ethanol as a motor fuel. Ethanol-fuel usage more than doubled in 1982 in the United States as compared to 1981, and plant capacity is expanding rapidly. Methanol has not yet begun to compete with ethanol because of federal limitations on the concentration of methanol in blends with gasoline. Relaxation of these requirements and passage of tax-forgiveness laws for methanol now enjoyed by ethanol could provide the incentives to make methanol the dominant fuel for vehicles in the long term.

  10. Sustainable Production of Switchgrass for Biomass Energy

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Switchgrass (Panicum virgatum L.) is a C4 grass native to the North American tallgrass prairies, which historically extended from Mexico to Canada. It is the model perennial warm-season grass for biomass energy. USDA-ARS in Lincoln, NE has studied switchgrass continuously since 1936. Plot-scale rese...

  11. Session of alcohol and biomass energy technology

    NASA Astrophysics Data System (ADS)

    1992-09-01

    A situation and achievements of New Energy and Industrial Technology Development Organization's (NEDO's) development of alcohol biomass technology are presented. The following topics are addressed: a general situation of development of alcohol biomass technology; development of a methane gas manufacturing system using waste; focusing the physico-chemical decomposition; development of high efficiency waste power generation technology; development of corrosion-resistant superheater; demonstration tests of methanol conversion in oil-burning plants; development and research of a methanol engine system for power generation; demonstration tests of methanol conversion in oil-burning plants; and demonstration tests of a reformed methanol total power generation system (system designing and its evaluation). Results up to FY 1991 and research and development plans in FY 1992 of these development projects of alcohol biomass technology are illustrated.

  12. Study on new biomass energy systems

    NASA Astrophysics Data System (ADS)

    1992-03-01

    A biomass energy total system is proposed, and its feasibility is studied. It is the system in which liquid fuel is produced from eucalyptuses planted in the desert area in Australia for production of biomass resource. Eucalyptus tree planting aims at a growth amount of 40 cu m/ha. per year and a practical application area of 45,000ha. CO2 fixation in the biomass plantation becomes 540,000 tons at a 12 ton/ha. rate. Assuming that 0.55 ton of liquid fuel is produced from 1 ton of biomass, a petrochemical plant having a production of 2.5 million bbl/year per unit (equivalent to the fuel used in the 100,000kW class power plant) is needed. Moreover, survey is made on practicality of diesel substitution fuel by esterification of palm oil, and a marked effect of reduction in soot/smoke and particulates in exhaust gas is confirmed. The biomass conversion process technology and the technology for afforestation at the arid land and irrigation are important as future subjects, and the technology development using a bench plant and a pilot plant is needed.

  13. Biomass energy systems information user study

    SciTech Connect

    Belew, W.W.; Wood, B.L.; Marle, T.L.; Reinhardt, C.L.

    1981-02-01

    The results of a series of telephone interviews with groups of users of information on biomass energy systems are described. These results, part of a larger study on many different solar technologies, identify types of information each group needed and the best ways to get information to each group. This report is 1 of 10 discussing study results. The overall study provides baseline data about information needs in the solar community. Results from 12 biomass groups of respondents are analyzed in this report: Federally Funded Researchers (2 groups), Nonfederally Funded Researchers (2 groups), Representatives of Manufacturers (2 groups), Representatives of State Forestry Offices, Private Foresters, Forest Products Engineers, Educators, Cooperative Extension Service County Agents, and System Managers. The data will be used as input to the determination of information products and services the Solar Energy Research Institute, the Solar Energy Information Data Bank Network, and the entire information outreach community should be preparing and disseminating.

  14. Alternative biomass sources for thermal energy generation

    NASA Astrophysics Data System (ADS)

    Steensen, Torge; Müller, Sönke; Dresen, Boris; Büscher, Olaf

    2015-04-01

    Traditionally, renewable biomass energy sources comprise forests, agriculture and other large vegetation units. With the increasing demand on those landscape elements, including conflicts of interest to nature conservation and food production, the research focus should also incorporate smaller vegetation entities. In this study, we highlight the availability of small-scale features like roadside vegetation or hedges, which are rarely featured in maps. Roadside vegetation, however, is well known and regularly trimmed to allow the passing of traffic but the cut material is rarely harvested. Here, we combine a remote-sensing-based approach to quantify the seasonal biomass harvests with a GIS-based method to outline optimal transportation routes to, and the location of, storage units and power plants. Our main data source will be ESA's upcoming Sentinel-2 optical satellite. Spatial resolution of 10 meters in the visible and near infrared requires the use of spectral unmixing to derive end member spectra of the targeted biomass objects. Additional stereo-matching and LIDAR measurements allow the accompanying height estimate to derive the biomass volume and its changes over time. GIS data bases from the target areas allow the discrimination between traditional, large features (e.g. forests and agriculture) as well as previously unaccounted for, smaller vegetation units. With the mapped biomass occurrence and additional, GIS-based infrastructure information, we can outline transport routes that take into account local restrictions like nature reserve areas, height or weight limitations as well as transport costs in relation to potential gains. This information can then be processed to outline optimal places for power plants. To simulate the upcoming Sentinel-2 data sets, we use airborne data from the AISA Eagle, spatially and spectrally down-sampled to match Sentinel 2's resolution. Our test scenario is an area in western Germany, the Kirchheller Heide, close to the city

  15. BIOMASS-TO-ENERGY FEASIBILITY STUDY

    SciTech Connect

    Cecil T. Massie

    2002-09-03

    The purpose of this study was to assess the economic and technical feasibility of producing electricity and thermal energy from biomass by gasification. For an economic model we chose a large barley malting facility operated by Rahr Malting Co. in Shakopee, Minnesota. This plant provides an excellent backdrop for this study because it has both large electrical loads and thermal loads that allowed us to consider a wide range of sizes and technical options. In the end, eleven scenarios were considered ranging from 3.1 megawatts (MWe) to 19.8 MWe. By locating the gasification and generation at an agricultural product processing plant with large electrical and thermal loads, the expectation was that some of the limitations of stand-alone biomass power plants would be overcome. In addition, since the process itself created significant volumes of low value biomass, the hope was that most of the biomass gathering and transport issues would be handled as well. The development of low-BTU gas turbines is expected to fill a niche between the upper limit of multiple spark ignited engine set systems around 5 MWe and the minimum reasonable scale for steam turbine systems around 10 MWe.

  16. Biomass yielding potential of naturally regenerated Prosopis juliflora tree stands at three varied ecosystems in southern districts of Tamil Nadu, India.

    PubMed

    Saraswathi, K; Chandrasekaran, S

    2016-05-01

    Fuel energy demand is of great concern in recent times due to the depletion of fossil fuel resources. Biomass serves as widely available primary renewable energy source. Hence, a study was performed to assess the above-ground biomass yielding capability of fuel wood tree Prosopis juliflora in three varied ecosystems viz., coastal, fallow land and riparian ecosystems in southern districts of Tamil Nadu. The results showed that the biomass production potential and above-ground net primary productivity of P. juliflora depend on the age of the tree stands and the nature of ecosystem. A higher biomass yield was observed for P. juliflora trees with 5 to 10 years old when compared to less than 5 years of their age. Among the three ecosystems, the maximum biomass production was recorded in riparian ecosystem. The stands with less than 5-year-old P. juliflora trees gave 1.40 t/ha, and 5- to 10-year-old tree stands produced 27.69 t/ha in riparian ecosystem. Above-ground net primary productivity of both the age groups was high in fallow land ecosystem. In riparian ecosystem, the wood showed high density and low sulphur content than the other two ecosystems. Hence, P. juliflora biomass can serve as an environmentally and economically feasible fuel as well as their utilization proffers an effective means to control its invasiveness. PMID:26797948

  17. Bavarian program for using renewable energies (biomass-network)

    SciTech Connect

    Weber, T.

    1995-11-01

    In Bavaria biomass is the most important regenerated resource of energy besides water. For the energetic utilization of biomass the following groups of products should be developed: biogenic fuels (biodiesel, nature diesel), biogas and warmth, steam and electricity based on biomass in small heating plants, heating plants, heating and electricity plants and in combustions of biomass in connection with coal. In a long term the future percentage of biomass used as a resource of energy could be 12%. But in a first step only 5% of the primary energy requirement should be sufficiently supplied with biomass. Biomass as a combustible has a special importance in Bavaria. Therefore residues of forest work, of the utilization of wood, of landscape conservation works, and of the agriculture, such as straw and energy crops are used. For the reason of rationalization within the utilization of biomass a self propelling biotruck, that condenses biomass, was developed. In the next years the state funds of the utilization of biomass as a resource of energy are about 50 Mio DM, available from the Bavarian free state, the Federal Republic of Germany and the EU. These funds are especially assigned for technological furtherances. The funds are directed by CARMEN, an institution founded by the economy and the Bavarian free state for all matters concerning renewable resources. The production and utilization of renewable resources in Bavaria give new tasks to agricultural areas and create new jobs. Moreover many positive effects for the environment and the economic welfare are given.

  18. Current biomass energy technology in Brazil

    SciTech Connect

    Gibson, H.G.

    1985-06-01

    The potential for major biomass energy production in Brazil is very great because of the significant possibilities for expansion of the agricultural and forest production there. For example, production of 20 t/ha (metric) of dry wood in the Amazon basin is reported here by the senior author, who worked with the huge JARI operation there. In addition to the current large ethanol production (7.5 billion liters estimated 1983/84) based mainly on sugar cane, the potential for expanding this with sweet sorghum and cassava is promising. Research and development there and in the US resulted in a high-compression ethanol tractor showing slightly higher thermal efficiency than a standard diesel tractor under field operating conditions.

  19. Biomass energy: Sustainable solution for greenhouse gas emission

    NASA Astrophysics Data System (ADS)

    Sadrul Islam, A. K. M.; Ahiduzzaman, M.

    2012-06-01

    Biomass is part of the carbon cycle. Carbon dioxide is produced after combustion of biomass. Over a relatively short timescale, carbon dioxide is renewed from atmosphere during next generation of new growth of green vegetation. Contribution of renewable energy including hydropower, solar, biomass and biofuel in total primary energy consumption in world is about 19%. Traditional biomass alone contributes about 13% of total primary energy consumption in the world. The number of traditional biomass energy users expected to rise from 2.5 billion in 2004 to 2.6 billion in 2015 and to 2.7 billion in 2030 for cooking in developing countries. Residential biomass demand in developing countries is projected to rise from 771 Mtoe in 2004 to 818 Mtoe in 2030. The main sources of biomass are wood residues, bagasse, rice husk, agro-residues, animal manure, municipal and industrial waste etc. Dedicated energy crops such as short-rotation coppice, grasses, sugar crops, starch crops and oil crops are gaining importance and market share as source of biomass energy. Global trade in biomass feedstocks and processed bioenergy carriers are growing rapidly. There are some drawbacks of biomass energy utilization compared to fossil fuels viz: heterogeneous and uneven composition, lower calorific value and quality deterioration due to uncontrolled biodegradation. Loose biomass also is not viable for transportation. Pelletization, briquetting, liquefaction and gasification of biomass energy are some options to solve these problems. Wood fuel production is very much steady and little bit increase in trend, however, the forest land is decreasing, means the deforestation is progressive. There is a big challenge for sustainability of biomass resource and environment. Biomass energy can be used to reduce greenhouse emissions. Woody biomass such as briquette and pellet from un-organized biomass waste and residues could be used for alternative to wood fuel, as a result, forest will be saved and

  20. Biomass I. Science Activities in Energy [and] Teacher's Guide.

    ERIC Educational Resources Information Center

    Oak Ridge Associated Universities, TN.

    Designed for science students in fourth, fifth, and sixth grades, the activities in this unit illustrate principles and problems related to biomass as a form of energy. (The word biomass is used to describe all solid material of animal or vegetable origin from which energy may be extracted.) Twelve student activities using art, economics,…

  1. Estimates of U.S. Biomass Energy Consumption 1992

    EIA Publications

    1994-01-01

    This report is the seventh in a series of publications developed by the Energy Information Administration (EIA) to quantify the biomass derived primary energy used by the U.S. economy. It presents estimates of 1991 and 1992 consumption.

  2. Dual energy use systems: District heating survey

    NASA Astrophysics Data System (ADS)

    1980-07-01

    The current status of and problems facing district heating systems operated by electric utilities were identified. The technical and economic factors which can affect the present and future success of district heating systems in the United States were evaluated. A survey of 59 district heating electric utilities was conducted to determine the current status of the industry. Questions developed to obtain data on technical, economic, regulator, and marketing factors were included in the survey. Literature on district heating in the U.S. and abroad was collected from governments, industry and foreign sources and reviewed to aid in evaluating the current and future potential of the industry. Interviews were held with executives of 16 utilities that operate district heating systems in order to determine corporate attitudes. A summary of the literature obtained is provided. Survey results are tabulated and described. The interviews and survey data were used to compile 10 case studies of utilities operating district heating systems under a braod range of circumstances.

  3. Biomass measurement from LANDSAT: Drought and energy applications

    NASA Technical Reports Server (NTRS)

    Maxwell, E. L.

    1981-01-01

    The theory supporting the use of vegetation indices derived from LANDSAT data for the direct measurement of biomass is reviewed. The use of multispectral data to measure biomass is a natural and viable application since the photosynthetic production of biomass gives vegetation its unique spectral properties. Vegetation indices also perform a normalization function which tends to make them insensitive to atmospheric and soil color variations. Optical and digital LANDSAT products are discussed relative to the use of vegetation indices to monitor drought impact. Based on results obtained in Colorado, operational use of LANDSAT to monitor drought is cost effective, practical and ready for implementation today. The direct measurement of biomass energy resources may also benefit from LANDSAT technology. Measurement of total biomass and annual primary production may be feasible. Identification of that component of biomass resources available for energy use will require other sources of information, however.

  4. World Energy Projection System Plus Model Documentation: District Heat Model

    EIA Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) District Heat Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  5. A survey of state clean energy fund support for biomass

    SciTech Connect

    Fitzgerald, Garrett; Bolinger, Mark; Wiser, Ryan

    2004-08-20

    This survey reviews efforts by CESA member clean energy funds to promote the use of biomass as a renewable energy source. For each fund, details are provided regarding biomass eligibility for support, specific programs offering support to biomass projects, and examples of supported biomass projects (if available). For the purposes of this survey, biomass is defined to include bio-product gasification, combustion, co-firing, biofuel production, and the combustion of landfill gas, though not all of the programs reviewed here take so wide a definition. Programs offered by non-CESA member funds fall outside the scope of this survey. To date, three funds--the California Energy Commission, Wisconsin Focus on Energy, and the New York State Energy Research and Development Authority--have offered programs targeted specifically at the use of biomass as a renewable energy source. We begin by reviewing efforts in these three funds, and then proceed to cover programs in other funds that have provided support to biomass projects when the opportunity has arisen, but otherwise do not differentially target biomass relative to other renewable technologies.

  6. Education and training implications of biomass energy system use

    NASA Astrophysics Data System (ADS)

    Bell, S. E.; Gove, R. M.; Little, J. R.

    1981-08-01

    Direct observations of 189 biomass-related operations combined with existing reports, feasibility studies, and expert opinion are used to assess the education and training implications of biomass energy system use. The number of permanent jobs in activities related to biomass energy production could easily reach the hundreds of thousands by the end of the century. However, national employment related to biomass energy will represent only a very small portion of the employment in any major occupational category. In addition, an analysis of occupational skill requirements suggests that the impacts on education and training institutions are likely to be minimal. Regional shortages could develop for foresters, forestry technicians, chemists, laboratory technicians, process operators, and certain engineers; but these are likely to be in response to economy-wide growth rather than biomass energy-related activity alone.

  7. Biomass energy: the scale of the potential resource.

    PubMed

    Field, Christopher B; Campbell, J Elliott; Lobell, David B

    2008-02-01

    Increased production of biomass for energy has the potential to offset substantial use of fossil fuels, but it also has the potential to threaten conservation areas, pollute water resources and decrease food security. The net effect of biomass energy agriculture on climate could be either cooling or warming, depending on the crop, the technology for converting biomass into useable energy, and the difference in carbon stocks and reflectance of solar radiation between the biomass crop and the pre-existing vegetation. The area with the greatest potential for yielding biomass energy that reduces net warming and avoids competition with food production is land that was previously used for agriculture or pasture but that has been abandoned and not converted to forest or urban areas. At the global scale, potential above-ground plant growth on these abandoned lands has an energy content representing approximately 5% of world primary energy consumption in 2006. The global potential for biomass energy production is large in absolute terms, but it is not enough to replace more than a few percent of current fossil fuel usage. Increasing biomass energy production beyond this level would probably reduce food security and exacerbate forcing of climate change. PMID:18215439

  8. Considerations in implementing integrated biomass energy systems in developing countries

    SciTech Connect

    Perlack, R.D.; Ranney, J.W.

    1993-08-01

    In this paper, we discuss the issues and barriers associated with implementing integrated biomass energy systems in developing countries. An integrated biomass energy system in dependent on sustainably grown and managed energy crops, is supportive of rural development, is environmentally beneficial (locally and globally), is adapted to local conditions, takes advantage of by- and co-products, and uses conversion technologies that have been optimized for biomass. A preliminary evaluation of a biomass to electricity project relying on plantation grown feedstocks in rural Yunnan Province in Southwest China provided some financial/economic results, general conclusions, and an initial framework for conducting such assessments. Our assessment indicates that social and environmental benefits are substantial and that investment in the facility is well-justified. However, there are so many considerations to take into account when assessing biomass energy systems that their evaluation is exceedingly complex. These considerations are grouped into biomass production, biomass logistics and transport, and biomass conversion. Implementing such systems requires another grouping of considerations into energy and economics, institutional and social issues, and environmental issues. These are further defined in an effort to establish a framework of evaluation and assessment for other such projects. The conclusions that such a project would be viable in rural China is shadowed by many site-specific circumstances and highlights the need for systematic and integrated appraisal.

  9. Combining MSS and AVHRR imagery to assess vegetation biomass and dynamics in an arid pastoral ecosystem, Turkana District, Kenya

    SciTech Connect

    Ellis, J.E.; Swift, D.M.; Hart, T.C.; Dick, O.B.

    1987-07-01

    Landsat multi-spectral scanner (MSS) imagery was used to develop a vegetation type-biomass map of the 84,000 Km/sup 2/ Turkana District, Kenya. NOAA satellite advanced very high resolution radiometry (AVHRR) imagery was overlaid on the MSS map to trace the seasonal and annual dynamics of vegetation communities used by Turkana pastoral nomads, 1981-1984. Four regions (sub-sectional territories) were compared with respect to peak herbaceous biomass, woody canopy cover, and seasonal fluxes in total green biomass. Results demonstrated major variations among regions and between wet and dry season ranges within regions. Pastoral land use patterns appear to minimize effects of seasonal vegetation fluxes on livestock herds.

  10. ENVIRONMENT CONSEQUENCES OF WOOD AND OTHER BIOMASS SOURCES OF ENERGY

    EPA Science Inventory

    Current important researchg needs whose results will be critical to EPA's mission in the next two to three decades with regard to a major expansion in the use of biomass, as an energy source are identified. Biomass currently contributes about 2.4 quads or 3% to the total national...

  11. Small School District Saves Money with Energy Grant.

    ERIC Educational Resources Information Center

    Kussmaul, Donald L.

    1983-01-01

    Describes how the small Tiskilwa (Illinois) school district used a United States Department of Energy grant to replace and block windows and insulate the attic in the elementary school. Describes savings in dollars and energy resulting from the energy audit and technical assistance phases of the project. (SB)

  12. Environmental implications of increased biomass energy use. Final report

    SciTech Connect

    Miles, T.R. Sr.; Miles, T.R. Jr.

    1992-03-01

    This study reviews the environmental implications of continued and increased use of biomass for energy to determine what concerns have been and need to be addressed and to establish some guidelines for developing future resources and technologies. Although renewable biomass energy is perceived as environmentally desirable compared with fossil fuels, the environmental impact of increased biomass use needs to be identified and recognized. Industries and utilities evaluating the potential to convert biomass to heat, electricity, and transportation fuels must consider whether the resource is reliable and abundant, and whether biomass production and conversion is environmentally preferred. A broad range of studies and events in the United States were reviewed to assess the inventory of forest, agricultural, and urban biomass fuels; characterize biomass fuel types, their occurrence, and their suitability; describe regulatory and environmental effects on the availability and use of biomass for energy; and identify areas for further study. The following sections address resource, environmental, and policy needs. Several specific actions are recommended for utilities, nonutility power generators, and public agencies.

  13. Energy conversion of biomass in coping with global warming

    SciTech Connect

    Yokoyama, Shin-ya; Ogi, Tomoko; Minowa, Tomoaki

    1993-12-31

    The main purpose of the present paper is to propose energy conversion technologies of biomass in coping with global warming. Among thermochemical conversion, liquid fuel production by high pressure process is mainly introduced. Biomass is a term used to describe materials of biological origin, either purpose-grown or arising as by-products, residues or wastes from forestry, agriculture and food processing. Such biomass is a renewable energy sources dependent on solar energy. Through photosynthesis, plants converts carbon dioxide into organic materials used in their growth. Energy can be recovered from the plant materials by several processes, the simplest way is burning in air. As far as biomass is used in this way, there is no atmospheric accumulation of carbon dioxide making no effect on the Greenhouse Effect, provided that the cycle of regrowth and burning is sustained.

  14. Biomass and energy productivity of Leucaena under humid subtropical conditions

    SciTech Connect

    Othman, A.B.; Prine, G.M.

    1984-01-01

    A table shows the amount and energy content of above-ground biomass produced in 1982 and 1983 by the 12 most productive of 62 accessions of Leucanena spp. established in 1979 at the University of Florida. Mean annual biomass production of the 12 accessions was 29.3 and 24.7 Mg/ha, with energy contents of 19,690 and 19,820 J/g, in 1982 and 1983 respectively.

  15. 1994 Washington State directory of Biomass Energy Facilities

    SciTech Connect

    Deshaye, J.A.; Kerstetter, J.D.

    1994-03-01

    This is the fourth edition of the Washington Directory of Biomass Energy Facilities, the first edition was published in 1987. The purpose of this directory is to provide a listing of and basic information about known biomass producers and users within the state to help demonstrate the importance of biomass energy in fueling our state`s energy needs. In 1992 (latest statistical year), estimates show that the industrial sector in Washington consumed nearly 128 trillion Btu of electricity, nearly 49.5 trillion Btu of petroleum, over 82.2 trillion Btu of natural gas, and over 4.2 trillion Btu of coal. Facilities listed in this directory generated approximately 114 trillion Btu of biomass energy - 93 trillion were consumed from waste wood and spent chemicals. In the total industrial energy picture, wood residues and chemical cooking liquors placed second only to electricity. This directory is divided into four main sections biogas production, biomass combustion, ethanol production, and solid fuel processing facilities. Each section contains maps and tables summarizing the information for each type of biomass. Provided in the back of the directory for reference are a conversion table, a table of abbreviations, a glossary, and an index. Chapter 1 deals with biogas production from both landfills and sewage treatment plants in the state. Biogas produced from garbage and sewage can be scrubbed and used to generate electricity. At the present time, biogas collected at landfills is being flared on-site, however four landfills are investigating the feasibility of gas recovery for energy. Landfill biogas accounted for approximately 6 percent of the total biomass reported. Sewage treatment biogas accounted for 0.6 percent. Biogas generated from sewage treatment plants is primarily used for space and process heat, only one facility presently scrubs and sells methane. Together, landfill and sewage treatment plant biogas represented over 6.6 percent of the total biomass reported.

  16. Energy Efficiency of Biogas Produced from Different Biomass Sources

    NASA Astrophysics Data System (ADS)

    Begum, Shahida; Nazri, A. H.

    2013-06-01

    Malaysia has different sources of biomass like palm oil waste, agricultural waste, cow dung, sewage waste and landfill sites, which can be used to produce biogas and as a source of energy. Depending on the type of biomass, the biogas produced can have different calorific value. At the same time the energy, being used to produce biogas is dependent on transportation distance, means of transportation, conversion techniques and for handling of raw materials and digested residues. An energy systems analysis approach based on literature is applied to calculate the energy efficiency of biogas produced from biomass. Basically, the methodology is comprised of collecting data, proposing locations and estimating the energy input needed to produce biogas and output obtained from the generated biogas. The study showed that palm oil and municipal solid waste is two potential sources of biomass. The energy efficiency of biogas produced from palm oil residues and municipal solid wastes is 1.70 and 3.33 respectively. Municipal solid wastes have the higher energy efficiency due to less transportation distance and electricity consumption. Despite the inherent uncertainties in the calculations, it can be concluded that the energy potential to use biomass for biogas production is a promising alternative.

  17. Impact assessment of biomass-based district heating systems in densely populated communities. Part I: Dynamic intake fraction methodology

    NASA Astrophysics Data System (ADS)

    Petrov, Olga; Bi, Xiaotao; Lau, Anthony

    2015-08-01

    This study contributes to the literature by proposing a novel, state-of-the-art approach to estimate incremental air quality and health impacts of proposed or installed district energy systems (DES), such as the growing biomass-based DES, on the immediately surrounding community where population density varies significantly during day as well as the micrometeorological conditions. Spatial and temporal dynamics of pollutant concentrations at sensitive receptors obtained from modeled actual source emissions, inclusion of site-specific terrain, land use and microclimatic characteristics, population density and breathing rates are examined based on their impacts on the exposure potential expressed by the intake fraction (iF). Overall, results revealed that when those parameters are changing, the increase of iF calculated based on average ambient concentrations at each receptor for the UBC campus for the day and night hours for September 2012, ranges from 6.2% to 43.0%: introducing actual spatial receptor distribution led to 43% increase of iF, combined spatial and population dynamics led to 11.3% increase of iF, while introducing temporal dynamics and varying breathing rates resulted in 6.2% and 21.4% increase in iF respectively, compared to the base case box model where receptors and population were treated as static and uniformly distributed across the modeling domain. It is thus essential to take into consideration temporal and spatial variations of atmospheric conditions and dispersion, population density and varying aspiration rates in accurately assessing the health impacts of DES located at densely populated urban communities.

  18. Review of the Regional Biomass Energy Program: Technical projects

    SciTech Connect

    Lusk, P.

    1994-12-31

    This article summarizes technical projects of the regional Biomass Energy Program. Projects included are as follows: economic impact studies for renewable energy resources; alternative liquid fuels; Wood pellets fuels forum; residential fuel wood consumption; waste to energy decision-makers guide; fuel assessment for cogeneration facilities; municipal solid waste combustion characteristics.

  19. Alfalfa -- a sustainable crop for biomass energy production

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Alfalfa (Medicago sativa) has the potential to be a significant contributor to America's renewable energy future. In an alfalfa biomass energy production system, alfalfa forage would be separated into stem and leave fractions. The stems would be processed to produce energy, and the leaves would be s...

  20. Energy production from biomass (Part 2): Conversion technologies.

    PubMed

    McKendry, Peter

    2002-05-01

    The use of biomass to provide energy has been fundamental to the development of civilisation. In recent times pressures on the global environment have led to calls for an increased use of renewable energy sources, in lieu of fossil fuels. Biomass is one potential source of renewable energy and the conversion of plant material into a suitable form of energy, usually electricity or as a fuel for an internal combustion engine, can be achieved using a number of different routes, each with specific pros and cons. A brief review of the main conversion processes is presented, with specific regard to the production of a fuel suitable for spark ignition gas engines. PMID:12058830

  1. Application of Nuclear Energy to Bitumen Upgrading and Biomass Conversion

    SciTech Connect

    Mamoru Numata; Yasushi Fujimura; Takayuki Amaya; Masao Hori

    2006-07-01

    Key drivers for the increasing use of nuclear energy are the need to mitigate global warming and the requirement for energy security. Nuclear energy can be applied not only to generate electricity but also as a heat source. Moreover, nuclear energy can be applied for hydrogen as well as water production. The application of nuclear energy to oil processing and biomass production is studied in this paper. (authors)

  2. Low-Energy Electron Scattering by Sugarcane Lignocellulosic Biomass Molecules

    NASA Astrophysics Data System (ADS)

    Oliveira, Eliane; Sanchez, Sergio; Bettega, Marcio; Lima, Marco; Varella, Marcio

    2012-06-01

    The use of second generation (SG) bioethanol instead of fossil fuels could be a good strategy to reduce greenhouse gas emissions. However, the efficient production of SG bioethanol has being a challenge to researchers around the world. The main barrier one must overcome is the pretreatment, a very important step in SG bioethanol aimed at breaking down the biomass and facilitates the extraction of sugars from the biomass. Plasma-based treatment, which can generate reactive species, could be an interesting possibility since involves low-cost atmospheric-pressure plasma. In order to offer theoretical support to this technique, the interaction of low-energy electrons from the plasma with biomass is investigated. This study was motived by several works developed by Sanche et al., in which they understood that DNA damage arises from dissociative electron attachment, a mechanism in which electrons are resonantly trapped by DNA subunits. We will present elastic cross sections for low-energy electron scattering by sugarcane biomass molecules, obtained with the Schwinger multichannel method. Our calculations indicate the formation of π* shape resonances in the lignin subunits, while a series of broad and overlapping σ* resonances are found in cellulose and hemicellulose subunits. The presence of π* and σ* resonances could give rise to direct and indirect dissociation pathways in biomass. Then, theoretical resonance energies can be useful to guide the plasma-based pretreatment to break down specific linkages of interest in biomass.

  3. Comparative study of different waste biomass for energy application.

    PubMed

    Motghare, Kalyani A; Rathod, Ajit P; Wasewar, Kailas L; Labhsetwar, Nitin K

    2016-01-01

    Biomass is available in many varieties, consisting of crops as well as its residues from agriculture, forestry, and the agro-industry. These different biomass find their way as freely available fuel in rural areas but are also responsible for air pollution. Emissions from such solid fuel combustion to indoor, regional and global air pollution largely depend on fuel types, combustion device, fuel properties, fuel moisture, amount of air supply for combustion and also on climatic conditions. In both economic and environment point of view, gasification constitutes an attractive alternative for the use of biomass as a fuel, than the combustion process. A large number of studies have been reported on a variety of biomass and agriculture residues for their possible use as renewable fuels. Considering the area specific agriculture residues and biomass availability and related transportation cost, it is important to explore various local biomass for their suitability as a fuel. Maharashtra (India) is the mainstay for the agriculture and therefore, produces a significant amount of waste biomass. The aim of the present research work is to analyze different local biomass wastes for their proximate analysis and calorific value to assess their potential as fuel. The biomass explored include cotton waste, leaf, soybean waste, wheat straw, rice straw, coconut coir, forest residues, etc. mainly due to their abundance. The calorific value and the proximate analysis of the different components of the biomass helped in assessing its potential for utilization in different industries. It is observed that ash content of these biomass species is quite low, while the volatile matter content is high as compared to Indian Coal. This may be appropriate for briquetting and thus can be used as a domestic fuel in biomass based gasifier cook stoves. Utilizing these biomass species as fuel in improved cook-stove and domestic gasifier cook-stoves would be a perspective step in the rural energy and

  4. Decentralized conversion of biomass to energy, fuels and electricity with fuel cells

    SciTech Connect

    Grimes, P.

    1996-12-31

    Fuel cells, new processes, advanced equipment and total system approaches will allow biomass to become a larger source of energy to make electricity, fuel and chemicals. These innovative new approaches allow smaller scale operations and allow decentralization of biomass to energy. The pivotal role of biomass will change and expand. Biomass will become a significant near term and a long term energy source.

  5. Department of Energy Recovery Act Investment in Biomass Technologies

    SciTech Connect

    2010-11-01

    The American Recovery and Reinvestment Act of 2009 (Recovery Act) provided more than $36 billion to the Department of Energy (DOE) to accelerate work on existing projects, undertake new and transformative research, and deploy clean energy technologies across the nation. Of this funding, $1029 million is supporting innovative work to advance biomass research, development, demonstration, and deployment.

  6. An Energy Management Programme for Grande Prairie Public School District. Energy Conservation: Energy Management.

    ERIC Educational Resources Information Center

    Calgary Univ. (Alberta).

    This report describes a pilot energy conservation project in Grande Prairie (Alberta) School District No. 2357. Extensive data collection and analysis were undertaken to provide a sound, quantitative basis for evaluation of the program. Energy conserving measures requiring capital outlays were not considered. During the project, electric demand…

  7. The upgrading of the energy of biomass by thermal methods

    SciTech Connect

    Deglise, X.; Lede, J.

    1982-10-01

    A survey is given of various thermal processes for upgrading biomass as a source of energy or chemical raw materials. Estimates are made of the quantity of biomass available and the types best suited to the various processes. The reactions and their yields are discussed. The different types of reactors and means of supplying heat are reviewed for the case of gasification, with special attention to the advantages of concentrated solar energy. Uses are proposed for the products and recommendations are made for future research.

  8. A REVIEW ON BIOMASS DENSIFICATION TECHNOLOGIE FOR ENERGY APPLICATION

    SciTech Connect

    JAYA SHANKAR TUMULURU; CHRISTOPHER T. WRIGHT

    2010-08-01

    The world is currently facing challenges to reduce the dependence on fossil fuels and to achieve a sustainable renewable supply. Renewable energies represent a diversity of energy sources that can help to maintain the equilibrium of different ecosystems. Among the various sources of renewable energy, biomass is finding more uses as it is considered carbon neutral since the carbondioxide released during its use is already part of the carbon cycle (Arias et al., 2008). Increasing the utilization of biomass for energy can help to reduce the negative CO2 impact on the environment and help to meet the targets established in the Kyoto Protocol (UN, 1998). Energy from biomass can be produced from different processes like thermochemical (combustion, gasification, and pyrolysis), biological (anaerobic digestion, fermentation) or chemical (esterification) where direct combustion can provide a direct near-term energy solution (Arias et al., 2008). Some of the inherent problems with raw biomass materials, like low bulk density, high moisture content, hydrophilic nature and low calorific value, limit the ease of use of biomass for energy purposes (Arias et al., 2008). In fact, due to its low energy density compared to fossil fuels, high volumes of biomass will be needed; adding to problems associated with storage, transportation and feed handling at a cogeneration plant. Furthermore, grinding biomass pulverizes, can be very costly and in some cases impractical. All of these drawbacks have given rise to the development of new technologies in order to increase the quality of biomass fuels. The purpose of the work is mainly in four areas 1) Overview of the torrefaction process and to do a literature review on i) Physical properties of torrefied raw material and torrefaction gas composition. 2) Basic principles in design of packed bed i) Equations governing the flow of material in packed bed ii) Equations governing the flow of the gases in packed bed iii) Effect of physical

  9. 1990 Washington State directory of biomass energy facilities

    SciTech Connect

    Deshaye, J.A.; Kerstetter, J.D.

    1990-01-01

    This second edition is an update of biomass energy production and use in Washington State for 1989. The purpose of this directory is to provide a listing of known biomass users within the state and some basic information about their facilities. The data can be helpful to persons or organizations considering the use of biomass fuels. The directory is divided into three sections of biomass facilities with each section containing a map of locations and a data summary table. In addition, a conversion table, a glossary and an index are provided in the back of the directory. The first section deals with biogas production from wastewater treatment plants. The second section provides information on the wood combustion facilities in the state. This section is subdivided into two categories. The first is for facilities connected with the forest products industries. The second category include other facilities using wood for energy. The third section is composed of three different types of biomass facilities -- ethanol, municipal solid waste, and solid fuel processing. Biomass facilities included in this directory produce over 64 trillion Btu (British thermal units) per year. Wood combustion facilities account for 91 percent of the total. Biogas and ethanol facilities each produce close to 800 billion Btu per year, MSW facilities produce 1845 billion BTU, and solid fuel processing facilities produce 2321 billion Btu per year. To put these numbers in perspective, Washington's industrial section uses 200 trillion Btu of fuels per year. Therefore, biomass fuels used and/or produced by facilities listed in this directory account for nearly 32 percent of the state's total industrial fuel demand. This is a sizable contribution to the state's energy needs.

  10. 1990 Washington State directory of biomass energy facilities

    SciTech Connect

    Deshaye, J.A.; Kerstetter, J.D.

    1990-12-31

    This second edition is an update of biomass energy production and use in Washington State for 1989. The purpose of this directory is to provide a listing of known biomass users within the state and some basic information about their facilities. The data can be helpful to persons or organizations considering the use of biomass fuels. The directory is divided into three sections of biomass facilities with each section containing a map of locations and a data summary table. In addition, a conversion table, a glossary and an index are provided in the back of the directory. The first section deals with biogas production from wastewater treatment plants. The second section provides information on the wood combustion facilities in the state. This section is subdivided into two categories. The first is for facilities connected with the forest products industries. The second category include other facilities using wood for energy. The third section is composed of three different types of biomass facilities -- ethanol, municipal solid waste, and solid fuel processing. Biomass facilities included in this directory produce over 64 trillion Btu (British thermal units) per year. Wood combustion facilities account for 91 percent of the total. Biogas and ethanol facilities each produce close to 800 billion Btu per year, MSW facilities produce 1845 billion BTU, and solid fuel processing facilities produce 2321 billion Btu per year. To put these numbers in perspective, Washington`s industrial section uses 200 trillion Btu of fuels per year. Therefore, biomass fuels used and/or produced by facilities listed in this directory account for nearly 32 percent of the state`s total industrial fuel demand. This is a sizable contribution to the state`s energy needs.

  11. Energy from biomass: Land analysis and evaluation of supply models

    NASA Astrophysics Data System (ADS)

    Shen, S. Y.; Stavrou, J.; Nelson, C. H.; Vyas, A.

    1982-01-01

    Methods of determining the potential overall impact of land-based biomass production on the agricultural and forestry sectors of the US economy were evaluated. The availability of the factor that possibly limits biomass production the most, land is examined. A summary by US Department of Agriculture regions of the amount of available land with potential for biomass production and not presently in food crop production is presented. Then several currently used agricultural and forestry models that could be used to determine the impact of increased land-based biomass production on the agricultural and forestry sectors are evaluated. It was found that the forestry sector would not be significantly effected even by a level of biomass production with an energy yield as high as 11 quads. It was recommended that a suitable linear programming model from Iowa State University's Center for Agricultural and Rural Development (CARD) modeling system be used for future analysis. The CARD model would have to be appropriately modified so that biomass grasses and short-rotation trees could be added to the agricultural crops.

  12. Final Report. Montpelier District Energy Project

    SciTech Connect

    Baker, Jessie; Motyka, Kurt; Aja, Joe; Garabedian, Harold T.

    2015-03-30

    The City of Montpelier, in collaboration with the State of Vermont, developed a central heat plant fueled with locally harvested wood-chips and a thermal energy distribution system. The project provides renewable energy to heat a complex of state buildings and a mix of commercial, private and municipal buildings in downtown Montpelier. The State of Vermont operates the central heat plant and the system to heat the connected state buildings. The City of Montpelier accepts energy from the central heat plant and operates a thermal utility to heat buildings in downtown Montpelier which elected to take heat from the system.

  13. Energy-efficient photobioreactor configuration for algal biomass production.

    PubMed

    Pegallapati, Ambica Koushik; Arudchelvam, Yalini; Nirmalakhandan, Nagamany

    2012-12-01

    An internally illuminated photobioreactor (IIPBR) design is proposed for energy-efficient biomass production. Theoretical rationale of the IIPBR design and its advantages over the traditional bubble column photobioreactors (PBRs) are presented, followed by experimental results from prototype scale cultivation of freshwater and marine algal strains in an 18L IIPBR. Based on theoretical considerations, the proposed IIPBR design has the potential to support 160% higher biomass density and higher biomass productivity per unit energy input, B/E, than a bubble column PBR of equal incident area per unit culture volume. Experimental B/E values recorded in this study with fresh water algae and marine algae (1.42 and 0.37 gW(-1)d(-1), respectively) are at least twice as those reported in the literature for comparable species cultivated in bubble column and airlift PBRs. PMID:23079413

  14. Impact of novel energy sources: OTEC, wind, goethermal, biomass

    NASA Technical Reports Server (NTRS)

    Roberts, A. S., Jr.

    1978-01-01

    Alternate energy conversion methods such as ocean thermal energy conversion (OTEC), wind power, geothermal wells and biomass conversion are being explored, and re-examined in some cases, for commercial viability. At a time when United States fossil fuel and uranium resources are found to be insufficient to supply national needs into the twenty-first century, it is essential to broaden the base of feasible energy conversion technologies. The motivations for development of these four alternative energy forms are established. Primary technical aspects of OTEC, wind, geothermal and biomass energy conversion systems are described along with a discussion of relative advantages and disadvantages of the concepts. Finally, the sentiment is voiced that each of the four systems should be developed to the prototype stage and employed in the region of the country and in the sector of economy which is complimentary to the form of system output.

  15. Development of Switchgrass Into a Biomass Energy Crop

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Switchgrass (Panicum virgatum L.) is a North American prairie grass that is being developed into a biomass energy crop in the USA and other countries. Research on switchgrass as a pasture and forage crop was initiated in the mid-1930's in an U.S. Department of Agriculture and University of Nebraska ...

  16. GENETIC IMPROVEMENT OF SWITCHGRASS AS A BIOMASS ENERGY CROP

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Switchgrass, Panicum virgatum, has been identified as a primary herbaceous biomass energy crop for use in temperate areas. To date, switchgrass has been primarily used as a warm-season pasture grass in the Great Plains and Midwest, USA. Previously developed cultivars or varieties have been release...

  17. Fuels and chemicals from biomass using solar thermal energy

    NASA Astrophysics Data System (ADS)

    Giori, G.; Leitheiser, R.; Wayman, M.

    1981-05-01

    The significant nearer term opportunities for the application of solar thermal energy to the manufacture of fuels and chemicals from biomass are summarized, with some comments on resource availability, market potential and economics. Consideration is given to the production of furfural from agricultural residues, and the role of furfural and its derivatives as a replacement for petrochemicals in the plastics industry.

  18. Fuels and chemicals from biomass using solar thermal energy

    NASA Technical Reports Server (NTRS)

    Giori, G.; Leitheiser, R.; Wayman, M.

    1981-01-01

    The significant nearer term opportunities for the application of solar thermal energy to the manufacture of fuels and chemicals from biomass are summarized, with some comments on resource availability, market potential and economics. Consideration is given to the production of furfural from agricultural residues, and the role of furfural and its derivatives as a replacement for petrochemicals in the plastics industry.

  19. Agronomic Considerations for Simulating Switchgrass for Biomass Energy

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Switchgrass (Panicum virgatum L.), a perennial warm-season grass native to North America, is a prime candidate for dedicated biomass energy for many regions of the USA. USDA-ARS in Lincoln, NE has conducted switchgrass research since the 1930’s. Plot-scale research has been conducted on switchgrass ...

  20. Saint Paul Energy Park: the potential for district heating

    SciTech Connect

    Lee, C.; Kron, R.; Davis, H.

    1980-03-01

    The results of ANL's study of the energy and economic aspects of using district heating in the St. Paul Energy Park are summarized. The Energy Park is a 6 million ft/sup 2/ residential, commercial office, and light industrial complex to be built in the midway area of St. Paul, Minnesota. Space heating and cooling design loads for the park were calculated assuming that the ASHRAE's 90-75 energy-conserving construction standards would be used in constructing the park's buildings. Based in part on this assumption, ANL estimated the costs and energy use characteristics of six possible energy system options for supplying Energy Park's space heating, space cooling, and domestic hot water heating needs. The results indicate that in today's economy, a central heating and cooling plant with natural gas boilers and electrically driven centrifugal chillers with thermal storage has good potential for energy and economic savings and clearly merits further consideration.

  1. Energy and conservation benefits from managed prairie biomass

    USGS Publications Warehouse

    Jungers, Jacob M.; Trost, Jared J.; Lehman, Clarence L.; Tilman, David

    2011-01-01

    Marginally productive land, such as that enrolled in the Conservation Reserve Program (CRP), may provide acreage and economic incentives for cellulosic energy production. Improving the yields from these lands will help establish a biomass producer?s position in the marketplace. The effects of water and nitrogen on biomass yields were investigated in both a plot-scale experiment and a broad-scale survey of CRP lands. The plot-scale experiment demonstrated that irrigation improved mixed-species prairie biomass yields more than nitrogen fertilizer on coarse-textured, marginally productive soils. Experimental plots amended with both irrigation and moderate (but not high) nitrogen produced more biomass than other treatment combinations, but this trend was not statistically significant. The survey of biomass yields on CRP lands across four Midwestern States indicates that yields are better correlated with June rainfall than any other individual month. Applying nutrient-enriched water such as agricultural runoff could benefit prairie yields if applied at appropriate times.

  2. Biomass recycling heat technology and energy products

    NASA Astrophysics Data System (ADS)

    Tabakaev, R. B.; Gergelizhiu, P. S.; Kazakov, A. V.; Zavorin, A. S.

    2014-10-01

    Relevance is determined by necessity of utilizing of local low-grade fuels by energy equpment. Most widespread Tomsk oblast (Russian Federation region) low-grade fuels are described and listed. Capability of utilizing is analysed. Mass balances of heat-technology conversion materials and derived products are described. As a result, recycling capability of low-grade fuels in briquette fuel is appraised.

  3. Photosynthetic pathway and biomass energy production.

    PubMed

    Marzola, D L; Bartholomew, D P

    1979-08-10

    The current interest in locating new or alternative sources of energy has focused attention on solar energy capture by crops that can be subsequently utilized as a substitute for fossil fuels. The very high productivity of sugarepane and the fact that it accumulates sugars that are directly fermentable to alcohol may have caused seemingly less productive crops to be overlooked. We show here that recoverable alcohol from achievable commercial yields of pineapple can actually equal that of sugarcane, with the pineapple crop requiring only a fraction of the water used by sugarcane. Pineapple is well adapted to the subhumid or semiarid tropics and thus is particularly well suited for exploiting large areas not now under cultivation with any crop of commercial value. PMID:17729660

  4. Process evaluation of the Regional Biomass Energy Program

    SciTech Connect

    Wilson, C.R.; Brown, M.A.; Perlack, R.D.

    1994-03-01

    The U.S. Department of Energy (DOE) established the Regional Biomass Energy Program (RBEP) in 1983 to increase the production and use of biomass energy resources. Through the creation of five regional program (the Great Lakes, Northeast, Pacific Northwest, Southeast, and West), the RBEP focuses on regionally specific needs and opportunities. In 1992, Oak Ridge National (ORNL) conducted a process evaluation of the RBEP Program designed to document and explain the development of the goals and strategies of the five regional programs; describe the economic and market context surrounding commercialization of bioenergy systems; assess the criteria used to select projects; describe experiences with cost sharing; identify program accomplishments in the transfer of information and technology; and offer recommendations for program improvement.

  5. Nanotechnology makes biomass electrolysis more energy efficient than water electrolysis.

    PubMed

    Chen, Y X; Lavacchi, A; Miller, H A; Bevilacqua, M; Filippi, J; Innocenti, M; Marchionni, A; Oberhauser, W; Wang, L; Vizza, F

    2014-01-01

    The energetic convenience of electrolytic water splitting is limited by thermodynamics. Consequently, significant levels of hydrogen production can only be obtained with an electrical energy consumption exceeding 45 kWh kg(-1)H2. Electrochemical reforming allows the overcoming of such thermodynamic limitations by replacing oxygen evolution with the oxidation of biomass-derived alcohols. Here we show that the use of an original anode material consisting of palladium nanoparticles deposited on to a three-dimensional architecture of titania nanotubes allows electrical energy savings up to 26.5 kWh kg(-1)H2 as compared with proton electrolyte membrane water electrolysis. A net energy analysis shows that for bio-ethanol with energy return of the invested energy larger than 5.1 (for example, cellulose), the electrochemical reforming energy balance is advantageous over proton electrolyte membrane water electrolysis. PMID:24892771

  6. Nanotechnology makes biomass electrolysis more energy efficient than water electrolysis

    NASA Astrophysics Data System (ADS)

    Chen, Y. X.; Lavacchi, A.; Miller, H. A.; Bevilacqua, M.; Filippi, J.; Innocenti, M.; Marchionni, A.; Oberhauser, W.; Wang, L.; Vizza, F.

    2014-06-01

    The energetic convenience of electrolytic water splitting is limited by thermodynamics. Consequently, significant levels of hydrogen production can only be obtained with an electrical energy consumption exceeding 45 kWh kg-1H2. Electrochemical reforming allows the overcoming of such thermodynamic limitations by replacing oxygen evolution with the oxidation of biomass-derived alcohols. Here we show that the use of an original anode material consisting of palladium nanoparticles deposited on to a three-dimensional architecture of titania nanotubes allows electrical energy savings up to 26.5 kWh kg-1H2 as compared with proton electrolyte membrane water electrolysis. A net energy analysis shows that for bio-ethanol with energy return of the invested energy larger than 5.1 (for example, cellulose), the electrochemical reforming energy balance is advantageous over proton electrolyte membrane water electrolysis.

  7. First biomass conference of the Americas: Energy, environment, agriculture, and industry. Proceedings, Volume 3

    SciTech Connect

    Not Available

    1993-10-01

    This conference was designed to provide a national and international forum to support the development of a viable biomass industry. Although papers on research activities and technologies under development that address industry problems comprised part of this conference, an effort was made to focus on scale-up and demonstration projects, technology transfer to end users, and commercial applications of biomass and wastes. The conference was divided into these major subject areas: Resource Base, Power Production, Transportation Fuels, Chemicals and Products, Environmental Issues, Commercializing Biomass Projects, Biomass Energy System Studies, and Biomass in Latin America. The papers in this third volume deal with Environmental Issues, Biomass Energy System Studies, and Biomass in Latin America. Concerning Environmental Issues, the following topics are emphasized: Global Climate Change, Biomass Utilization, Biofuel Test Procedures, and Commercialization of Biomass Products. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  8. Biomass: An Alternative Source of Energy for Eighth or Ninth Grade Science.

    ERIC Educational Resources Information Center

    Heyward, Lillie; Murff, Marye

    This teaching unit develops the possibility of using biomass as an alternative source of energy. The concept of biomass is explained and the processes associated with its conversion to energy are stated. Suggestions for development of biomass technology in different geographic areas are indicated. Lessons for 6 days are presented for use with…

  9. Energy from biomass — Some basic physical and related considerations

    NASA Astrophysics Data System (ADS)

    Gloyne, R. W.

    1983-09-01

    The production of vegetable matter (biomass) by photosynthesis is determined by species and by meteorological factors (especially, but not exclusively, solar radiation). Annual net primary production of land-based biomass corresponds to only about 1/1000 of the intercepted irradiation at ground level, but even so, is 10 times the world's estimated energy needs. The exploitation of this energy potential at any one place is critically influenced by the economic, political and social factors, amongst which are the competition from agriculture (especially food crops), forestry, industrial and urban (including leisure) needs for land and resources. Social factors (e.g. population and population density) also constitute prime influences. Strategies for utilisation range from the cultivation of special energy crops (readily conceivable on the American/ Australasian continents); to the more efficient manipulation of current land-use patterns (including “opportunity” cropping); to the more effective exploitation of biologi cal wastes (e.g. methane from sewage), probably the only immediately practical possibility in any densely populated and highly industrialised country. The spatial pattern of solar irradiation at ground level is complex. In the summer, total daily irradiation in continental high latitudes can exceed that in maritime temperate regions; and this combined with species differences and the almost infinite variety of shape and orientation of plant parts, result in a photosynthetic production of biomass which does not conform completely to a zonal pattern, but in broad terms annual dry matter production varies from a few kg/ha in Arctic Tundra to tens of tonnes in temperate latitudes rising to nearly 100 t/ha for perennial tropical crops. If a species could be developed to grow throughout the year at the current seasonal rate, a yield of 150 t/yr, ha) seems possible.

  10. Methods and guidelines for assessing customer district energy needs. Interim report

    SciTech Connect

    Oliker, I.; Taranov, D.

    1998-12-01

    District heating systems have been in service in cities, universities, and industrial facilities for more than 100 years. In recent years there has also been a rapid increase in the number of district cooling systems constructed as well as being studied for possible implementation. Ever increasing building construction and electricity costs (particularly demand charges), continued emphasis on energy conservation, new and improved equipment and piping technologies, and revived technologies such as thermal storage, have all contributed to the need and benefits of larger more efficient district energy (heating and cooling) plans and distribution systems. District energy (DE) may be generated in an existing conventional power plant (converted to cogeneration), a new gas-fired combined cycle plant or by electrical and gas fired chillers and boilers. The district energy system permits substantial energy savings over individual building cooling and heating systems. Further, such systems provide conditions for added economic development and environment improvement in the cities. District energy systems (particularly cooling systems) become more important in the US with the introduction of retail wheeling of electricity. Connecting a customer to a district cooling system (as opposed to individual electric chillers) implies a long-term customer for this service. Therefore the major motivation for district cooling development is to retain electric customers who otherwise may switch to alternative generators. The purpose of this project is to develop a methodology for evaluation of customer`s peak hourly, and annual load profiles in terms of useful energy to be supplied by a district system.

  11. Recycling legislation: A balanced approach for opening biomass energy opportunities

    SciTech Connect

    Easterly, J.L.

    1995-09-01

    State recycling legislation represents one of the barriers to using wood wastes for energy. Although many states are setting recycling goals that often mandate a significant portion of the waste stream be recycled, legislation in the same states specifically excludes wood-to-energy as a recycling option. A significant supply of yard waste and wood waste could be available for biomass power generation of recycling legislation credited the use of wood-to-energy as an acceptable recycling alternative. This article discusses in some detail the approach Florida legislation has pursued. It could be a model for other innovative recycling programs. It provides checks and balances as well as reasonable compromises that help to avoid or minimize objections by the environmental community.

  12. Harvesting forest biomass for energy in Minnesota: An assessment of guidelines, costs and logistics

    NASA Astrophysics Data System (ADS)

    Saleh, Dalia El Sayed Abbas Mohamed

    The emerging market for renewable energy in Minnesota has generated a growing interest in utilizing more forest biomass for energy. However, this growing interest is paralleled with limited knowledge of the environmental impacts and cost effectiveness of utilizing this resource. To address environmental and economic viability concerns, this dissertation has addressed three areas related to biomass harvest: First, existing biomass harvesting guidelines and sustainability considerations are examined. Second, the potential contribution of biomass energy production to reduce the costs of hazardous fuel reduction treatments in these trials is assessed. Third, the logistics of biomass production trials are analyzed. Findings show that: (1) Existing forest related guidelines are not sufficient to allow large-scale production of biomass energy from forest residue sustainably. Biomass energy guidelines need to be based on scientific assessments of how repeated and large scale biomass production is going to affect soil, water and habitat values, in an integrated and individual manner over time. Furthermore, such guidelines would need to recommend production logistics (planning, implementation, and coordination of operations) necessary for a potential supply with the least site and environmental impacts. (2) The costs of biomass production trials were assessed and compared with conventional treatment costs. In these trials, conventional mechanical treatment costs were lower than biomass energy production costs less income from biomass sale. However, a sensitivity analysis indicated that costs reductions are possible under certain site, prescriptions and distance conditions. (3) Semi-structured interviews with forest machine operators indicate that existing fuel reduction prescriptions need to be more realistic in making recommendations that can overcome operational barriers (technical and physical) and planning and coordination concerns (guidelines and communications

  13. Biomass energy opportunities on former sugarcane plantations in Hawaii

    SciTech Connect

    Phillips, V.D.; Tvedten, A.E.; Lu, W.

    1995-11-01

    Electricity produced from burning sugarcane bagasse has provided as much as 10 percent of Hawaii`s electricity supply in the past. As sugarcane production has ceased on the islands of Oahu and Hawaii and diminished on Maui and Kauai, the role of biomass energy will be reduced unless economically viable alternatives can be identified. An empirical biomass yield and cost system model linked to a geographical information system has been developed at the University of Hawaii. This short-rotation forestry decision support system was used to estimate dedicated biomass feedstock supplies and delivered costs of tropical hardwoods for ethanol, methanol, and electricity production. Output from the system model was incorporated in a linear programming optimization model to identify the mix of tree plantation practices, wood processing technologies, and end-products that results in the highest economic return on investment under given market situations. An application of these decision-support tools is presented for hypothetical integrated forest product systems established at two former sugarcane plantations in Hawaii. Results indicate that the optimal profit opportunity exists for the production of medium density fibreboard and plywood, with annual net return estimates of approximately $3.5 million at the Hamakua plantation on the island of Hawaii and $2.2 million at the Waialua plantation on Oahu. Sensitivity analyses of the effects of different milling capacities, end-product market prices, increased plantation areas, and forced saw milling were performed. Potential economic credits for carbon sequestration and wastewater effluent management were estimated. While biofuels are not identified as an economical viable component, energy co-products may help reduce market risk via product diversification in such forestry ventures.

  14. Proceedings of the Chornobyl phytoremediation and biomass energy conversion workshop

    SciTech Connect

    Hartley, J.; Tokarevsky, V.

    1998-06-01

    Many concepts, systems, technical approaches, technologies, ideas, agreements, and disagreements were vigorously discussed during the course of the 2-day workshop. The workshop was successful in generating intensive discussions on the merits of the proposed concept that includes removal of radionuclides by plants and trees (phytoremediation) to clean up soil in the Chornobyl Exclusion Zone (CEZ), use of the resultant biomass (plants and trees) to generate electrical power, and incorporation of ash in concrete casks to be used as storage containers in a licensed repository for low-level waste. Twelve years after the Chornobyl Nuclear Power Plant (ChNPP) Unit 4 accident, which occurred on April 26, 1986, the primary 4radioactive contamination of concern is from radioactive cesium ({sup 137}Cs) and strontium ({sup 90}Sr). The {sup 137}Cs and {sup 90}Sr were widely distributed throughout the CEZ. The attendees from Ukraine, Russia, Belarus, Denmark and the US provided information, discussed and debated the following issues considerably: distribution and characteristics of radionuclides in CEZ; efficacy of using trees and plants to extract radioactive cesium (Cs) and strontium (Sr) from contaminated soil; selection of energy conversion systems and technologies; necessary infrastructure for biomass harvesting, handling, transportation, and energy conversion; radioactive ash and emission management; occupational health and safety concerns for the personnel involved in this work; and economics. The attendees concluded that the overall concept has technical and possibly economic merits. However, many issues (technical, economic, risk) remain to be resolved before a viable commercial-scale implementation could take place.

  15. Efficient conversion of solar energy to biomass and electricity

    PubMed Central

    2014-01-01

    The Earth receives around 1000 W.m−2 of power from the Sun and only a fraction of this light energy is able to be converted to biomass (chemical energy) via the process of photosynthesis. Out of all photosynthetic organisms, microalgae, due to their fast growth rates and their ability to grow on non-arable land using saline water, have been identified as potential source of raw material for chemical energy production. Electrical energy can also be produced from this same solar resource via the use of photovoltaic modules. In this work we propose a novel method of combining both of these energy production processes to make full utilisation of the solar spectrum and increase the productivity of light-limited microalgae systems. These two methods of energy production would appear to compete for use of the same energy resource (sunlight) to produce either chemical or electrical energy. However, some groups of microalgae (i.e. Chlorophyta) only require the blue and red portions of the spectrum whereas photovoltaic devices can absorb strongly over the full range of visible light. This suggests that a combination of the two energy production systems would allow for a full utilization of the solar spectrum allowing both the production of chemical and electrical energy from the one facility making efficient use of available land and solar energy. In this work we propose to introduce a filter above the algae culture to modify the spectrum of light received by the algae and redirect parts of the spectrum to generate electricity. The electrical energy generated by this approach can then be directed to running ancillary systems or producing extra illumination for the growth of microalgae. We have modelled an approach whereby the productivity of light-limited microalgae systems can be improved by at least 4% through using an LED array to increase the total amount of illumination on the microalgae culture. PMID:24976951

  16. Renewable biomass energy: Understanding regional scale environmental impacts

    SciTech Connect

    Graham, R.L.; Downing, M.

    1993-12-31

    If biomass energy is to become a significant component of the US energy sector, millions of acres of farmland must be converted to energy crops. The environmental implications of this change in land use must be quantitatively evaluated. The land use changes will be largely driven by economic considerations. Farmers will grow energy crops when it is profitable to do so. Thus, models which purport to predict environmental changes induced by energy crop production must take into account those economic features which will influence land use change. In this paper, we present an approach for projecting the probable environmental impacts of growing energy crops at the regional scale. The approach takes into account both economic and environmental factors. We demonstrate the approach by analyzing, at a county-level the probable impact of switchgrass production on erosion, evapotranspiration, nitrate in runoff, and phosphorous fertilizer use in multi-county subregions within the Tennessee Valley Authority (TVA) region. Our results show that the adoption of switchgrass production will have different impacts in each subregion as a result of differences in the initial land use and soil conditions in the subregions. Erosion, evapotranspiration, and nitrate in runoff are projected to decrease in both subregions as switchgrass displaces the current crops. Phosphorous fertilizer applications are likely to increase in one subregion and decrease in the other due to initial differences in the types of conventional crops grown in each subregion. Overall these changes portend an improvement in water quality in the subregions with the increasing adoption of switchgrass.

  17. Some employment and earnings implications of regional biomass energy utilization: New England and the Cornbelt States

    NASA Astrophysics Data System (ADS)

    Stevenson, W.; Bell, S. E.; Blair, L. M.; Gove, R. M.; Little, J. R.

    1981-08-01

    Because of their abundant forest and agricultural biomass resources, New England and the Cornbelt are likely to grow considerably in the development of biomass energy systems during the next decade or two. Forty thousand or more permanent jobs might be created in New England's wood energy industry by the end of the century. If alcohol-fuel use continues to grow, even greater potential for employment in biomass energy exists in the Cornbelt states. The associated earnings would be quite substantial for both regions. The direct combustion of wood and activities related to alcohol-fuel production are expected to be the major contributors to biomass energy production, employment, and earnings; but other biomass systems show potential as well. Energy extraction from municipal waste, anaerobic digestion of animal manure, and other biomass conversion systems will all generate employment as they grow in use.

  18. District Heating Systems Performance Analyses. Heat Energy Tariff

    NASA Astrophysics Data System (ADS)

    Ziemele, Jelena; Vigants, Girts; Vitolins, Valdis; Blumberga, Dagnija; Veidenbergs, Ivars

    2014-12-01

    The paper addresses an important element of the European energy sector: the evaluation of district heating (DH) system operations from the standpoint of increasing energy efficiency and increasing the use of renewable energy resources. This has been done by developing a new methodology for the evaluation of the heat tariff. The paper presents an algorithm of this methodology, which includes not only a data base and calculation equation systems, but also an integrated multi-criteria analysis module using MADM/MCDM (Multi-Attribute Decision Making / Multi-Criteria Decision Making) based on TOPSIS (Technique for Order Performance by Similarity to Ideal Solution). The results of the multi-criteria analysis are used to set the tariff benchmarks. The evaluation methodology has been tested for Latvian heat tariffs, and the obtained results show that only half of heating companies reach a benchmark value equal to 0.5 for the efficiency closeness to the ideal solution indicator. This means that the proposed evaluation methodology would not only allow companies to determine how they perform with regard to the proposed benchmark, but also to identify their need to restructure so that they may reach the level of a low-carbon business.

  19. District Energy Corporation SW 40th Street Thermal Energy Plant

    SciTech Connect

    Davlin, Thomas

    2014-06-06

    The overall deliverable from the project is the design, construction and commissioning of a detention facility heating and cooling system that minimizes ownership costs and maximizes efficiency (and therefore minimizes environmental impact). The primary deliverables were the proof of concept for the application of geothermal systems for an institutional facility and the ongoing, quarterly system operating data downloads to the Department of Energy . The primary advantage of geothermal based heat pump systems is the higher efficiency of the system compared to a conventional chiller, boiler, cooling tower based system. The higher efficiency results in a smaller environmental foot print and lower energy costs for the detention facility owner, Lancaster County. The higher efficiency for building cooling is primarily due to a more constant compressor condensing temperature with the geothermal well field acting as a thermal “sink” (in place of the conventional system’s cooling tower). In the heating mode, Ground Couple Heat Pump (GCHP) systems benefits from the advantage of a heat pump Coefficient of Performance (COP) of approximately 3.6, significantly better than a conventional gas boiler. The geothermal well field acting as a thermal “source” allows the heat pumps to operate efficiently in the heating mode regardless of ambient temperatures. The well field is partially located in a wetland with a high water table so, over time, the project will be able to identify the thermal loading characteristics of a well field located in a high water table location. The project demonstrated how a large geothermal well field can be installed in a wetland area in an economical and environmentally sound manner. Finally, the SW 40th Street Thermal Energy Plant project demonstrates the benefits of providing domestic hot water energy, as well as space heating, to help balance well filed thermal loading in a cooling dominated application. During the period of August 2012 thru

  20. Review of Prior Commercial Building Energy Efficiency Retrofit Evaluation: A Report to Snohomish Public Utilities District

    SciTech Connect

    Price, Phillip

    2014-12-22

    Snohomish County Public Utilities District (the District or Snohomish PUD) provides electricity to about 325,000 customers in Snohomish County, Washington. The District has an incentive programs to encourage commercial customers to improve energy efficiency: the District partially reimburses the cost of approved retrofits if they provide a level of energy performance improvement that is specified by contract. In 2013 the District contracted with Lawrence Berkeley National Laboratory to provide a third-party review of the Monitoring and Verification (M&V) practices the District uses to evaluate whether companies are meeting their contractual obligations. This work helps LBNL understand the challenges faced by real-world practitioners of M&V of energy savings, and builds on a body of related work such as Price et al. (2013). The District selected a typical project for which they had already performed an evaluation. The present report includes the District's original evaluation as well as LBNL's review of their approach. The review is based on the document itself; on investigation of the load data and outdoor air temperature data from the building evaluated in the document; and on phone discussions with Bill Harris of the Snohomish County Public Utilities District. We will call the building studied in the document the subject building, the original Snohomish PUD report will be referred to as the Evaluation, and this discussion by LBNL is called the Review.

  1. Regional allocation of biomass to U.S. energy demands under a portfolio of policy scenarios.

    PubMed

    Mullins, Kimberley A; Venkatesh, Aranya; Nagengast, Amy L; Kocoloski, Matt

    2014-01-01

    The potential for widespread use of domestically available energy resources, in conjunction with climate change concerns, suggest that biomass may be an essential component of U.S. energy systems in the near future. Cellulosic biomass in particular is anticipated to be used in increasing quantities because of policy efforts, such as federal renewable fuel standards and state renewable portfolio standards. Unfortunately, these independently designed biomass policies do not account for the fact that cellulosic biomass can equally be used for different, competing energy demands. An integrated assessment of multiple feedstocks, energy demands, and system costs is critical for making optimal decisions about a unified biomass energy strategy. This study develops a spatially explicit, best-use framework to optimally allocate cellulosic biomass feedstocks to energy demands in transportation, electricity, and residential heating sectors, while minimizing total system costs and tracking greenhouse gas emissions. Comparing biomass usage across three climate policy scenarios suggests that biomass used for space heating is a low cost emissions reduction option, while biomass for liquid fuel or for electricity becomes attractive only as emissions reduction targets or carbon prices increase. Regardless of the policy approach, study results make a strong case for national and regional coordination in policy design and compliance pathways. PMID:24512511

  2. Energy Potential of Biomass from Conservation Grasslands in Minnesota, USA

    PubMed Central

    Jungers, Jacob M.; Fargione, Joseph E.; Sheaffer, Craig C.; Wyse, Donald L.; Lehman, Clarence

    2013-01-01

    Perennial biomass from grasslands managed for conservation of soil and biodiversity can be harvested for bioenergy. Until now, the quantity and quality of harvestable biomass from conservation grasslands in Minnesota, USA, was not known, and the factors that affect bioenergy potential from these systems have not been identified. We measured biomass yield, theoretical ethanol conversion efficiency, and plant tissue nitrogen (N) as metrics of bioenergy potential from mixed-species conservation grasslands harvested with commercial-scale equipment. With three years of data, we used mixed-effects models to determine factors that influence bioenergy potential. Sixty conservation grassland plots, each about 8 ha in size, were distributed among three locations in Minnesota. Harvest treatments were applied annually in autumn as a completely randomized block design. Biomass yield ranged from 0.5 to 5.7 Mg ha−1. May precipitation increased biomass yield while precipitation in all other growing season months showed no affect. Averaged across all locations and years, theoretical ethanol conversion efficiency was 450 l Mg−1 and the concentration of plant N was 7.1 g kg−1, both similar to dedicated herbaceous bioenergy crops such as switchgrass. Biomass yield did not decline in the second or third year of harvest. Across years, biomass yields fluctuated 23% around the average. Surprisingly, forb cover was a better predictor of biomass yield than warm-season grass with a positive correlation with biomass yield in the south and a negative correlation at other locations. Variation in land ethanol yield was almost exclusively due to variation in biomass yield rather than biomass quality; therefore, efforts to increase biomass yield might be more economical than altering biomass composition when managing conservation grasslands for ethanol production. Our measurements of bioenergy potential, and the factors that control it, can serve as parameters for assessing the economic

  3. Improvement for Thermal Energy Characteristics of Wood Biomass Pelletized Using a Half Carbonized Technology

    NASA Astrophysics Data System (ADS)

    Ishimura, Kenji; Ida, Tamio; Fuchihata, Manabu; Honjo, Takako; Sano, Hiroshi

    Biomass pellet utilities are popular in North European as a pellet stove and boiler et al. But, we have a lot of problem on wood biomass utilities in social situations and geography conditions. Especially, to move of biomass from mountain area to user side transportation coast rises. Therefore, we have to improve for thermal energy characteristics in biomass based on moving. This technology is new carbonized technology for improvement of biomass thermal energy characteristics. This technology controls heated temperature and pressed force by hot-press method. Fundamental properties of biomass show thermal decomposition and ultimate analysis. In these results, we suggest to occur a half carbonized phenomena for improvement of thermal energy. Half carbonized phenomena begin approximately 540K in sawdust and 580K in cellulose. And, total calorifi c value suddenly increases in these heated temperatures. Sawdust could suggest occurring lower 40K to compare cellulose.

  4. Characterization of the straw stalk of the rapeseed plant as a biomass energy source

    SciTech Connect

    Karaosmanoglu, F.; Tetik, E.; Guerboy, B.; Sanli, I.

    1999-11-01

    Oil seed plants are important biomass energy sources. The rapeseed plant, which yields a high amount of vegetable oil, has a major position among other oil seed plants. In this study the straw stalk of the rapeseed plant (type 00 Brassica napus L.) has been investigated as a candidate for a biomass energy source.

  5. Pressurized Oxidative Recovery of Energy from Biomass Final Technical Report

    SciTech Connect

    M. Misra

    2007-06-10

    This study was conducted to evaluate the technical feasibility of using pressurized oxyfuel, the ThermoEnergy Integrated Power System (TIPS), to recover energy from biomass. The study was focused on two fronts—computer simulation of the TIPS plant and corrosion testing to determine the best materials of construction for the critical heat exchanger components of the process. The goals were to demonstrate that a successful strategy of applying the TIPS process to wood waste could be achieved. To fully investigate the technical and economic benefits of using TIPS, it was necessary to model a conventional air-fired biomass power plant for comparison purposes. The TIPS process recovers and utilizes the latent heat of vaporization of water entrained in the fuel or produced during combustion. This latent heat energy is unavailable in the ambient processes. An average composition of wood waste based on data from the Pacific Northwest, Pacific Southwest, and the South was used for the study. The high moisture content of wood waste is a major advantage of the TIPS process. The process can utilize the higher heating value of the fuel by condensing most of the water vapor in the flue gas and making the flue gas a useful source of heat. This is a considerable thermal efficiency gain over conventional power plants which use the lower heating value of the fuel. The elevated pressure also allows TIPS the option of recovering CO2 at near ambient temperatures with high purity oxygen used in combustion. Unlike ambient pressure processes which need high energy multi-stage CO2 compression to supply pipeline quality product, TIPS is able to simply pump the CO2 liquid using very little auxiliary power. In this study, a 15.0 MWe net biomass power plant was modeled, and when a CO2 pump was included it only used 0.1 MWe auxiliary power. The need for refrigeration is eliminated at such pressures resulting in significant energy, capital, and operating and maintenance savings. Since wood

  6. District Level Plan for Conservation. An Outline for a District-Level Plan for Energy Conservation. Energy Conservation Materials Package Number 2.

    ERIC Educational Resources Information Center

    Colorado State Dept. of Education, Denver. Interstate Energy Conservation Leadership.

    Features shared by successful school energy conservation programs include: (1) the formation of a district energy conservation committee that involves as many segments of the educational community as practical, (2) the assignment of specific responsibilities to specific individuals, (3) careful planning in the development of guidelines, (4)…

  7. Biomass for energy in the European Union - a review of bioenergy resource assessments.

    PubMed

    Bentsen, Niclas Scott; Felby, Claus

    2012-01-01

    This paper reviews recent literature on bioenergy potentials in conjunction with available biomass conversion technologies. The geographical scope is the European Union, which has set a course for long term development of its energy supply from the current dependence on fossil resources to a dominance of renewable resources. A cornerstone in European energy policies and strategies is biomass and bioenergy. The annual demand for biomass for energy is estimated to increase from the current level of 5.7 EJ to 10.0 EJ in 2020. Assessments of bioenergy potentials vary substantially due to methodological inconsistency and assumptions applied by individual authors. Forest biomass, agricultural residues and energy crops constitute the three major sources of biomass for energy, with the latter probably developing into the most important source over the 21st century. Land use and the changes thereof is a key issue in sustainable bioenergy production as land availability is an ultimately limiting factor. PMID:22546368

  8. Sustainable global energy supply based on lignocellulosic biomass from afforestation of degraded areas

    NASA Astrophysics Data System (ADS)

    Metzger, Jürgen O.; Hüttermann, Aloys

    2009-02-01

    An important aspect of present global energy scenarios is the assumption that the amount of biomass that can be grown on the available area is so limited that a scenario based on biomass as the major source of energy should be unrealistic. We have been investigating the question whether a Biomass Scenario may be realistic. We found that the global energy demand projected by the International Energy Agency in the Reference Scenario for the year 2030 could be provided sustainably and economically primarily from lignocellulosic biomass grown on areas which have been degraded by human activities in historical times. Moreover, other renewable energies will contribute to the energy mix. There would be no competition with increasing food demand for existing arable land. Afforestation of degraded areas and investment for energy and fuel usage of the biomass are not more expensive than investment in energy infrastructure necessary up to 2030 assumed in the fossil energy based Reference Scenario, probably much cheaper considering the additional advantages such as stopping the increase of and even slowly reducing the CO2 content of the atmosphere, soil, and water conservation and desertification control. Most importantly, investment for a Biomass Scenario would be actually sustainable, in contrast to investment in energy-supply infrastructure of the Reference Scenario. Methods of afforestation of degraded areas, cultivation, and energetic usage of lignocellulosic biomass are available but have to be further improved. Afforestation can be started immediately, has an impact in some few years, and may be realized in some decades.

  9. The environmental costs and benefits of biomass energy use in California

    SciTech Connect

    Morris, G.

    1997-05-01

    The California renewable energy industries have worked diligently during the past couple of years to develop public policies conducive to the future of renewable energy production within the context of electric market restructuring and the evolving competitive electric services industry. The state`s biomass power industry has organized itself as the California Biomass Energy Alliance (CBEA), and has participated vigorously in the regulatory and legislative processes. In order to reward biomass power generators for the special services they provide, CBEA has promoted the concept of providing incentives specifically targeted to biomass within the context of any renewables program enacted in the state. This concept has been embraced by the other renewables industry organizations, but resisted by the utilities. This study represents an effort to identify, characterize, ad quantify the environmental costs and benefits of biomass energy use in California, and to elucidate the future role of biomass power production within the context of the evolving deregulation of the California electricity industry. The report begins with a review of the development and growth of the California biomass power industry during the past 15 years. This is followed by an analysis of the biomass fuels market development during the same period. It examines trends in the types and costs of biomass fuels. The environmental performance of the mature California biomass energy industry is analyzed, and takes into account the environmental impacts of the industry, and the impacts that would be associated with disposing of the materials used as fuels if the biomass power industry were not in operation. The analysis is then extended to consider the environmental and economic consequences of the loss of biomass generating capacity since 1993. The report ends with a consideration of the future prospects for the industry in the context of restructuring.

  10. Strategic Plan for Sustainable Energy Management and Environmental Stewardship for Los Angeles Unified School District

    SciTech Connect

    Walker, A.; Beattie, D.; Thomas, K.; Davis, K.; Sim, M.; Jhaveri, A.

    2007-11-01

    This Strategic Plan for Sustainable Energy Management and Environmental Stewardship states goals, measures progress toward goals and how actions are monitored to achieve continuous improvement for the Los Angeles Unified School District.

  11. Biogas energy production from tropical biomass wastes by anaerobic digestion

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Anaerobic digestion (AD) is an attractive technology in tropical regions for converting locally abundant biomass wastes into biogas which can be used to produce heat, electricity, and transportation fuels. However, investigations on AD of tropical forestry wastes, such as albizia biomass, and food w...

  12. {open_quotes}Green{close_quotes} certification: An option for helping the biomass energy industry grow

    SciTech Connect

    Easterly, J.L.

    1995-09-01

    This article explores the potential merits of `green` certification as an approach that may help overcome barriers and facilitate the future growth of the biomass power industry. Two methods of certification are addressed in this article, independent certification and self certification. Topics discussed include the following: utility `green Pricing` opportunities; perspectives on sustainable forestry and biomass energy; market incentives and the role of biomass in mitigating greenhouse gas emissions. 7 refs.

  13. Eleventh Annual Conference on Alcohol and Biomass Energy Technologies

    NASA Astrophysics Data System (ADS)

    1991-10-01

    NEDO is undertaking a number of alcohol and biomass energy technology projects aiming at developing technology for bacterial production of fuel alcohol directly from currently unutilized resources such as agricultural and forestry wastes. This book reports the eleventh annual conference and consists of two parts. Part one describes outlines of these projects classified into three groups. In part two, achievements of these projects are reported in detail. For the development of fuel alcohol production technology using bacteria, searching for and breeding superior bacteria were achieved, and the optimum design of a total production system including a fermenter and peripheral processes was studied. Next, for the development of a high-efficiency membrane complex methane production unit from sewage and industrial waste water, membrane modules, a new type bioreactor, and an instrumentation and control system were investigated, leading to test production with pilot plants. Finally, for demonstration tests for converting oil-fired power stations to methanol, developmental studies on stationary diesel power generation and others were carried out.

  14. Conversion of agricultural bio-mass to energy via catalyst assisted pyrolysis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    One method for converting agricultural waste or specifically grown crops to energy is by heating this “bio-mass” to high temperatures in the absence of oxygen, a process called pyrolysis. Burning bio-mass in the presence of oxygen produces mostly carbon dioxide and water. Burning biomass in the ab...

  15. Implications of Perennial Biomass Energy Cropping Systems for Pasture and Forage Lands

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The lignocellulose in forage crops represents large source of biomass feedstock for conversion into energy-related end products. With new technologies and processes for biomass production and conversion approaching commercial reality forages could once again fuel agriculture. Some of the most extens...

  16. Economic approach to assess the forest carbon implications of biomass energy.

    PubMed

    Daigneault, Adam; Sohngen, Brent; Sedjo, Roger

    2012-06-01

    There is widespread concern that biomass energy policy that promotes forests as a supply source will cause net carbon emissions. Most of the analyses that have been done to date, however, are biological, ignoring the effects of market adaptations through substitution, net imports, and timber investments. This paper uses a dynamic model of forest and land use management to estimate the impact of United States energy policies that emphasize the utilization of forest biomass on global timber production and carbon stocks over the next 50 years. We show that when market factors are included in the analysis, expanded demand for biomass energy increases timber prices and harvests, but reduces net global carbon emissions because higher wood prices lead to new investments in forest stocks. Estimates are sensitive to assumptions about whether harvest residues and new forestland can be used for biomass energy and the demand for biomass. Restricting biomass energy to being sourced only from roundwood on existing forestland can transform the policy from a net sink to a net source of emissions. These results illustrate the importance of capturing market adjustments and a large geographic scope when measuring the carbon implications of biomass energy policies. PMID:22515911

  17. Great Lakes Regional Biomass Energy Program: Quarterly report, September 1, 1986-November 30, 1986

    SciTech Connect

    Bancroft, D.

    1987-05-01

    Stressing near-term biomass feedstock production techniques and conversion processes, the objective of the program is to increase the use of biomass energy by the public and private sectors in the Great Lakes region including Illinois, Indiana, Iowa, Michigan, Minnesota, Ohio and Wisconsin. The Great Lakes Regional Biomass Energy Program is divided into three separate operational programs. The first is the State Grant Program, which provides resources to the seven state energy offices in the region to increase their capabilities in biomass energy. State-specific activities and interagency programs are emphasized in the State Grant Program. The second, the Subcontractor Program, involves the letting of subcontracts to private organizations to address regional biomass issues and needs. The third is the In-House Technology Transfer Program in which Council staff develop biomass energy publications and reports. The primary activity this quarter has been information transfer. The program spearheaded an effort to reach the private sector and inform people about a wide range of biomass technologies. In one of the most successful events, 35 cheese manufacturers traveled to the South Alma Cheese Factory to see a woodburner supporting the process steam needs of the facility. In addition, 20 workshops were conducted throughout the region focusing on industrial wood combustion, municipal waste to energy incineration and short rotation forestry. 1 fig.

  18. Biomass Energy for Transport and Electricity: Large scale utilization under low CO2 concentration scenarios

    SciTech Connect

    Luckow, Patrick; Wise, Marshall A.; Dooley, James J.; Kim, Son H.

    2010-01-25

    This paper examines the potential role of large scale, dedicated commercial biomass energy systems under global climate policies designed to stabilize atmospheric concentrations of CO2 at 400ppm and 450ppm. We use an integrated assessment model of energy and agriculture systems to show that, given a climate policy in which terrestrial carbon is appropriately valued equally with carbon emitted from the energy system, biomass energy has the potential to be a major component of achieving these low concentration targets. The costs of processing and transporting biomass energy at much larger scales than current experience are also incorporated into the modeling. From the scenario results, 120-160 EJ/year of biomass energy is produced by midcentury and 200-250 EJ/year by the end of this century. In the first half of the century, much of this biomass is from agricultural and forest residues, but after 2050 dedicated cellulosic biomass crops become the dominant source. A key finding of this paper is the role that carbon dioxide capture and storage (CCS) technologies coupled with commercial biomass energy can play in meeting stringent emissions targets. Despite the higher technology costs of CCS, the resulting negative emissions used in combination with biomass are a very important tool in controlling the cost of meeting a target, offsetting the venting of CO2 from sectors of the energy system that may be more expensive to mitigate, such as oil use in transportation. The paper also discusses the role of cellulosic ethanol and Fischer-Tropsch biomass derived transportation fuels and shows that both technologies are important contributors to liquid fuels production, with unique costs and emissions characteristics. Through application of the GCAM integrated assessment model, it becomes clear that, given CCS availability, bioenergy will be used both in electricity and transportation.

  19. Nationwide survey of energy conservation in public school districts: Institutional, organizational, and technical characteristics

    SciTech Connect

    Collins, N.E.; Ettinger, G.A.; Gaines, L.L.; Kier, P.H.; Miller, K.L. ); Kammerud, R.C. )

    1987-09-01

    This report summarizes the responses to a mail survey sent to superintendents and other administrators of public school districts. The survey was part of an evaluation project for the USDOE Institutional Conservation Program (ICP). The goal of the project is to identify the most successful energy conservation measures (equipment and activities) available to the institutional buildings sector. To accomplish this goal, four specific research objectives were defined: To determine the impact of the ICP grants program on fostering energy efficiency and saving energy; to determine key characteristics of institutional conservation efforts outside the federal program; To determine the technical, organizational, and Institutional conditions that create the opportunity for energy conservation measures (ECMS) to be most effective; and to identify key technology transfer opportunities. This report focuses on those characteristics of school districts (and the schools within those districts) that might influence the identification, implementation, operation, and impacts of institutional energy conservation efforts. Information about institutional characteristics was gathered through a mail survey of public school districts and private schools. The first mailing resulted in responses from 90 of the 823 public school districts selected through a combination cluster-and-stratification sampling technique and 64 of the 1,700 private schools selected as a stratified random sample. Remaining project resources were used to collect data to achieve a statistically sound sample of a total of 250 public school districts by telephone interviews. In doing so, some questions had to be dropped. Responses from both the mall surveys and the telephone interviews of public school districts were combined into one data set. This report describes results for all 250 districts.

  20. Enhancing biomass energy yield from pilot-scale high rate algal ponds with recycling.

    PubMed

    Park, J B K; Craggs, R J; Shilton, A N

    2013-09-01

    This paper investigates the effect of recycling on biomass energy yield in High Rate Algal Ponds (HRAPs). Two 8 m(3) pilot-scale HRAPs treating primary settled sewage were operated in parallel and monitored over a 2-year period. Volatile suspended solids were measured from both HRAPs and their gravity settlers to determine biomass productivity and harvest efficiency. The energy content of the biomass was also measured. Multiplying biomass productivity and harvest efficiency gives the 'harvestable biomass productivity' and multiplying this by the energy content defines the actual 'biomass energy yield'. In Year 1, algal recycling was implemented in one of the ponds (HRAPr) and improved harvestable biomass productivity by 58% compared with the control (HRAPc) without recycling (HRAPr: 9.2 g/m(2)/d; HRAPc: 5.8 g/m(2)/d). The energy content of the biomass grown in HRAPr, which was dominated by Pediastrun boryanum, was 25% higher than the control HRAPc which contained a mixed culture of 4-5 different algae (HRAPr: 21.5 kJ/g; HRAPc: 18.6 kJ/g). In Year 2, HRAPc was then seeded with the biomass harvested from the P. boryanum dominated HRAPr. This had the effect of shifting algal dominance from 89% Dictyosphaerium sp. (which is poorly-settleable) to over 90% P. boryanum in 5 months. Operation of this pond was then switched to recycling its own harvested biomass, which maintained P. boryanum dominance for the rest of Year 2. This result confirms, for the first time in the literature, that species control is possible for similarly sized co-occurring algal colonies in outdoor HRAP by algal recycling. With regard to the overall improvement in biomass energy yield, which is a critical parameter in the context of algal cultivation for biofuels, the combined improvements that recycling triggered in biomass productivity, harvest efficiency and energy content enhanced the harvested biomass energy yield by 66% (HRAPr: 195 kJ/m(2)/day; HRAPc: 118 kJ/m(2)/day). PMID:23764593

  1. A Case Study of Complete Energy Management at the Herricks Union Free School District.

    ERIC Educational Resources Information Center

    Schreiber, Melvin; Paige, Haskell E., Sr.

    A school district energy management program reduced oil consumption 34 percent and electrical consumption 20 percent. Low cost modifications to the heating and ventilating equipment in the schools resulted in energy savings that "paid back" the labor plus material costs in less than a year. Each building was placed into an energy conservation…

  2. Energy Conservation in the San Diego Community College District: Initial Study.

    ERIC Educational Resources Information Center

    San Diego Community Coll. District, CA. Research Office.

    This four-part report presents the findings of a study conducted by the San Diego Community College District (SDCCD) to assess methods of effecting savings in energy usage at college facilities, to determine curricular areas in which energy-related instruction could be increased, and to examine ways of saving energy through scheduling and…

  3. 29 CFR 24.114 - District court jurisdiction of retaliation complaints under the Energy Reorganization Act.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the Energy Reorganization Act. 24.114 Section 24.114 Labor Office of the Secretary of Labor PROCEDURES... Provisions § 24.114 District court jurisdiction of retaliation complaints under the Energy Reorganization Act... the Energy Reorganization Act, and there is no showing that there has been delay due to the bad...

  4. Districts Cut Back Busing, Seek Ways to Save Energy

    ERIC Educational Resources Information Center

    Aarons, Dakarai I.

    2008-01-01

    A struggling economy and skyrocketing fuel costs are making their grim presence felt as school districts across the country open their doors. With fewer dollars to spend, everything from teaching positions to bus transportation is on the chopping block. As students go back to school, many will find themselves in more crowded classrooms with texts…

  5. National Environmental/Energy Workforce Assessment for District of Columbia.

    ERIC Educational Resources Information Center

    National Field Research Center Inc., Iowa City, IA.

    This report presents existing workforce levels, training programs and career potentials and develops staffing level projections (1976-1982) based on available information for the District of Columbia. The study concerns itself with the environmental pollution control areas of air, noise, potable water, pesticides, radiation, solid waste,…

  6. Anaerobic conversion of microalgal biomass to sustainable energy carriers--a review.

    PubMed

    Lakaniemi, Aino-Maija; Tuovinen, Olli H; Puhakka, Jaakko A

    2013-05-01

    This review discusses anaerobic production of methane, hydrogen, ethanol, butanol and electricity from microalgal biomass. The amenability of microalgal biomass to these bioenergy conversion processes is compared with other aquatic and terrestrial biomass sources. The highest energy yields (kJ g(-1) dry wt. microalgal biomass) reported in the literature have been 14.8 as ethanol, 14.4 as methane, 6.6 as butanol and 1.2 as hydrogen. The highest power density reported from microalgal biomass in microbial fuel cells has been 980 mW m(-2). Sequential production of different energy carriers increases attainable energy yields, but also increases investment and maintenance costs. Microalgal biomass is a promising feedstock for anaerobic energy conversion processes, especially for methanogenic digestion and ethanol fermentation. The reviewed studies have mainly been based on laboratory scale experiments and thus scale-up of anaerobic utilization of microalgal biomass for production of energy carriers is now timely and required for cost-effectiveness comparisons. PMID:23021960

  7. First Biomass Conference of the Americas: Energy, environment, agriculture, and industry. Proceedings, Volume 2

    SciTech Connect

    Not Available

    1993-10-01

    This conference was designed to provide a national and international forum to support the development of a viable biomass industry. Although papers on research activities and technologies under development that address industry problems comprised part of this conference, an effort was made to focus on scale-up and demonstration projects, technology transfer to end users, and commercial applications of biomass and wastes. The conference was divided into these major subject areas: Resource Base, Power Production, Transportation Fuels, Chemicals and Products, Environmental Issues, Commercializing Biomass Projects, Biomass Energy System Studies, and Biomass in Latin America. The papers in this second volume cover Transportation Fuels, and Chemicals and Products. Transportation Fuels topics include: Biodiesel, Pyrolytic Liquids, Ethanol, Methanol and Ethers, and Commercialization. The Chemicals and Products section includes specific topics in: Research, Technology Transfer, and Commercial Systems. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  8. Techno-economic analysis of renewable energy source options for a district heating project

    SciTech Connect

    Ghafghazi, S.; Sowlati, T.; Sokhansanj, Shahabaddine; Melin, Staffan

    2009-09-01

    With the increased interest in exploiting renewable energy sources for district heating applications, the economic comparison of viable options has been considered as an important step in making a sound decision. In this paper, the economic performance of several energy options for a district heating system in Vancouver, British Columbia, is studied. The considered district heating system includes a 10 MW peaking/ backup natural gas boiler to provide about 40% of the annual energy requirement and a 2.5 MW base-load system. The energy options for the base-load system include: wood pellet, sewer heat, and geothermal heat. Present values of initial and operating costs of each system were calculated over 25-year service life of the systems, considering depreciation and salvage as a negative cost item. It was shown that the wood pellet heat producing technologies provided less expensive energy followed by the sewer heat recovery, geothermal and natural gas systems. Among wood pellet technologies, the grate burner was a less expensive option than powder and gasifier technologies. It was found that using natural gas as a fuel source for the peaking/backup system accounted for more than 40% of the heat production cost for the considered district heating center. This is mainly due to the high natural gas prices which cause high operating costs over the service life of the district heating system. Variations in several economic inputs did not change the ranking of the technology options in the sensitivity analysis. However, it was found that the results were more sensitive to changes in operating costs of the system than changes in initial investment. It is economical to utilize wood pellet boilers to provide the base-load energy requirement of district heating systems Moreover, the current business approach to use natural gas systems for peaking and backup in district heating systems could increase the cost of heat production significantly.

  9. Biotechnology of biomass conversion

    SciTech Connect

    Wayman, M.; Parekh, S.R.

    1990-01-01

    This book covers: An introduction to biomass crops; The microbiology of fermentation processes; The production of ethanol from biomass crops, such as sugar cane and rubbers; The energy of biomass conversion; and The economics of biomass conversion.

  10. Potential supply and cost of biomass from energy crops in the TVA region

    SciTech Connect

    Graham, R.L.; Downing, M.E.

    1995-04-01

    The economic and supply structures of energy crop markets have not been established. Establishing the likely price and supply of energy crop biomass in a region is a complex task because biomass is not an established commodity as are oil, natural gas, and coal. In this study, the cost and supply of short-rotation woody crop (SRWC) and switchgrass biomass for the Tennessee Valley Authority (TVA) region-a 276-county area that includes portions of 11 states in the southeastern United States - are projected. Projected prices and quantities of biomass are assumed to be a function of the amount and quality of crop and pasture land available in a region, expected energy crop yields and production costs on differing soils and land types, and the profit that could be obtained from current conventional crop production on these same lands. Results include the supply curves of SRWC and switchgrass biomass that are projected to be available from the entire region, the amount and location of crop and pasture land that would be used, and the conventional agricultural crops that would be displaced as a function of energy crop production. Finally, the results of sensitivity analysis on the projected cost and supply of energy crop biomass are shown. In particular, the separate impacts of varying energy crop production costs and yields, and interest rates are examined.

  11. Northeast Regional Biomass Energy Program. Progress report, 9th year, October--December 1991

    SciTech Connect

    O`Connell, R.A.

    1992-02-01

    The Northeast Regional Biomass Program (NRBP) is entering its ninth year of operation. The management and the objectives have virtually remained unchanged and are stated as follows. The program conducted by NRBP has three basic features: (1) a state grant component that provides funds (with a 50 percent matching requirement) to each of the states in the region to strengthen and integrate the work of state agencies involved in biomass energy; (2) a series of technical reports and studies in areas that have been identified as being of critical importance to the development of biomass energy in the region; and (3) a continuous long range planning component with heavy private sector involvement that helps to identify activities necessary to spur greater development and use of biomass energy in the Northeast.

  12. BIOMASS GASIFICATION FOR AGRICULTURAL ENERGY SOURCES AND SOIL ENRICHMENT

    EPA Science Inventory

    Phase I of the Biomass Gasification Project gave birth to many success stories and demonstrated enormous potential for members of the local agricultural community and for students within the university.

    Community-building

    Watauga County Cooperative Ext...

  13. Eighty-seventh annual conference of the International District Energy Association

    SciTech Connect

    1996-11-01

    The proceedings of the 87th Annual Conference of the International District Energy Association are presented. Thirty pages were presented at the Conference which was held on June 8-12, 1996 in Washington, D.C. A separate abstract and indexing have been prepared for each paper for inclusion in the Energy Science and Technology Database.

  14. Waste biomass-to-energy supply chain management: a critical synthesis.

    PubMed

    Iakovou, E; Karagiannidis, A; Vlachos, D; Toka, A; Malamakis, A

    2010-10-01

    The development of renewable energy sources has clearly emerged as a promising policy towards enhancing the fragile global energy system with its limited fossil fuel resources, as well as for reducing the related environmental problems. In this context, waste biomass utilization has emerged as a viable alternative for energy production, encompassing a wide range of potential thermochemical, physicochemical and bio-chemical processes. Two significant bottlenecks that hinder the increased biomass utilization for energy production are the cost and complexity of its logistics operations. In this manuscript, we present a critical synthesis of the relative state-of-the-art literature as this applies to all stakeholders involved in the design and management of waste biomass supply chains (WBSCs). We begin by presenting the generic system components and then the unique characteristics of WBSCs that differentiate them from traditional supply chains. We proceed by discussing state-of-the-art energy conversion technologies along with the resulting classification of all relevant literature. We then recognize the natural hierarchy of the decision-making process for the design and planning of WBSCs and provide a taxonomy of all research efforts as these are mapped on the relevant strategic, tactical and operational levels of the hierarchy. Our critical synthesis demonstrates that biomass-to-energy production is a rapidly evolving research field focusing mainly on biomass-to-energy production technologies. However, very few studies address the critical supply chain management issues, and the ones that do that, focus mainly on (i) the assessment of the potential biomass and (ii) the allocation of biomass collection sites and energy production facilities. Our analysis further allows for the identification of gaps and overlaps in the existing literature, as well as of critical future research areas. PMID:20231084

  15. Environmental risks of utilizing crop and forest residues for biomass energy

    SciTech Connect

    Pimentel, D.; Fast, S.; Gallahan, D.; Moran, M.A.

    1983-08-01

    Crop and forest residues are a valuable biomass resource for natural, agricultural, and forest ecosystems. These residues are essential to protect the soil from erosion and rapid water runoff and to maintain soil organic matter and nutrients. Thus, only an estimated 20% of the total residues remaining after harvest can be utilized for conversion because of environmental limitations and the impracticality of harvesting residues on some lands. Although the potential contribution of biomass energy to U.S. energy needs is relatively small, it is renewable energy (assuming no environmental degradation) and therefore has some long term value to the nation's energy program.

  16. Assessment of industrial activity in the utilization of biomass for energy

    SciTech Connect

    Not Available

    1980-09-01

    The objective of this report is to help focus the federal programs in biomass energy, by identifying the status and objectives of private sector activity in the biomass field as of mid-1979. In addition, the industry's perceptions of government activities are characterized. Findings and conclusions are based principally on confidential interviews with executives in 95 companies. These included forest products companies, agricultural products companies, equipment manufacturers, electric and gas utilities petroleum refiners and distributors, research and engineering firms, and trade organizations, as listed in Exhibit 1. Interview findings have been supplemented by research of recent literature. The study focused on four key questions: (1) what is the composition of the biomass industry; (2) what are the companies doing; (3) what are their objectives and strategies; and (4) what are the implications for government policy. This executive summary provides highlights of the key findings and conclusions. The summary discussion is presented in seven parts: (1) overview of the biomass field; (2) structure of the biomass industry today; (3) corporate activities in biomass-related areas; (4) motivations for these activities; (5) industry's outlook on the future for energy-from-biomass; (6) industry's view of government activities; and (7) implications for Federal policy.

  17. Geographies of biomass and solar energy: Spatial decision support for regional energy sustainability

    NASA Astrophysics Data System (ADS)

    Calvert, Kirby Edward

    This thesis applies concepts and techniques in geography in order to contribute to our understanding of the opportunities and challenges associated with the transition toward renewable energy. The work is best understood as the sum of two parts. In the first part, the methodological and philosophical underpinnings of the field of energy geography are explored in order to situate the research in the broader constellation of geographical practices surrounding energy. I make the case that energy transitions are not merely shifts in energy supply but are also simultaneously fundamental shifts in prevailing spatial relations, so that energy transition management is best conceived as a spatial strategy with emphasis on regional level land-energy planning. In the second part of the thesis, I aim to provide decision support in favour of this spatial strategy. This begins in Chapter 4 with a comprehensive critical review of how GIScience and remote sensing has been applied in RE assessments and spatial planning. The next three chapters engage key gaps in this literature and are the analytical contributions of the thesis. The focus of the research is on biomass and solar energy in (eastern) Ontario. In Chapter 5 I develop geographically explicit supply-cost curves for forestry and agricultural biomass and assess the relative merits of a mixed biomass feedstock stream. In Chapter 6 I recognize and address the issue that developers of dedicated bioenergy crops and ground-mount solar PV systems prefer the same type of land. Land-energy trade-offs are modeled and their implications in the context of incentivizing RE development are discussed. In Chapter 7 I explore ways in which targeted facility siting can capture ancillary benefits related to RE production. I argue that focusing on the benefits as well as the costs of system siting is critical to linking developer and public interests. Ontario's feed-in tariff program is evaluated in the light of this claim. Chapter 8

  18. 1983-1984 Wisconsin energy development and demonstration fund: Evaluation of an energy management plan for a school district

    SciTech Connect

    Not Available

    1985-09-01

    The Energy Management Program was implemented in 1984. This report is an evaluation and review of the Beaver Dam Program. Since the program was only started in 1984, the long term benefits of Energy Management versus Energy Conservation cannot be easily evaluated. The primary purpose of this report is to guide other school districts and similar government units in implementing long range energy conservation through a planned and monitored energy management program.

  19. Assessment of industrial activity in the utilization of biomass for energy

    NASA Astrophysics Data System (ADS)

    1980-09-01

    Federal programs in biomass energy are defined by identifying the status and objectives of private sector activity in the biomass field as of mid 1979. The industry's perceptions of government activites are characterized. Findings and conclusions are based principally on confidential interviews with executives in 95 companies. These included forest products companies, agricultural products companies, equipment manufacturers, electric and gas utilities, petroleum refiners and distributors, research and engineering firms, and trade organizations. The study focused on four key questions: (1) what is the composition of the biomass industry? (2) what are the companies doing? (3) what are their objectives and strategies? (4) what are the implications for government policy?

  20. Biomass energy production. Citations from the International Aerospace Abstracts data base

    NASA Technical Reports Server (NTRS)

    Moore, P. W.

    1980-01-01

    These 210 citations from the international literature describe the production and/or utilization of most forms of biomass as a source of energy, fuel, food, and chemical intermediates or feedstocks. Biomass conversion by incineration, gasification, pyrolysis, hydrolysis, anaerobic digestion, or fermentation, as well as by catalytic, photosynthetic, chemosynthetic, and bio-electrochemical means are among the conversion processes considered. Discussions include biomass plantation and material productivity, transportation and equipment requirements, effects, comparisons of means and efficiencies of utilization and conversion, assessments of limitations, and evaluations of economic potential.

  1. Complex analysis of energy production technologies from solid biomass in the Ukraine

    NASA Astrophysics Data System (ADS)

    Zheliezna, T. A.; Drozdova, O. I.

    2014-04-01

    The results of the energetic, economic, and environmental analyses of technologies of energy production from solid biomass are considered. Examples of the introduction of the technology of the direct combustion of biomass (straw and wood) in a boiler installation, a domestic boiler, and a combined heat and power plant (CHPP) are considered. The results indicate the energetic and environmental reasonability of implementation of such projects. From the economic viewpoint, the introduction of the boilers that use the biomass is profitable with the substitution of natural gas for the state-financed and industrial consumers, and the CHPP operation with the use of biomass is profitable with selling the electrical energy by the "feed-in" tariff.

  2. Energy-efficient biomass processing with pulsed electric fields for bioeconomy and sustainable development.

    PubMed

    Golberg, Alexander; Sack, Martin; Teissie, Justin; Pataro, Gianpiero; Pliquett, Uwe; Saulis, Gintautas; Stefan, Töpfl; Miklavcic, Damijan; Vorobiev, Eugene; Frey, Wolfgang

    2016-01-01

    Fossil resources-free sustainable development can be achieved through a transition to bioeconomy, an economy based on sustainable biomass-derived food, feed, chemicals, materials, and fuels. However, the transition to bioeconomy requires development of new energy-efficient technologies and processes to manipulate biomass feed stocks and their conversion into useful products, a collective term for which is biorefinery. One of the technological platforms that will enable various pathways of biomass conversion is based on pulsed electric fields applications (PEF). Energy efficiency of PEF treatment is achieved by specific increase of cell membrane permeability, a phenomenon known as membrane electroporation. Here, we review the opportunities that PEF and electroporation provide for the development of sustainable biorefineries. We describe the use of PEF treatment in biomass engineering, drying, deconstruction, extraction of phytochemicals, improvement of fermentations, and biogas production. These applications show the potential of PEF and consequent membrane electroporation to enable the bioeconomy and sustainable development. PMID:27127539

  3. Effect of biomass feedstock chemical and physical properties on energy conversion processes: Volume 1, Overview

    SciTech Connect

    Butner, R.S.; Elliott, D.C.; Sealock, L.J. Jr.; Pyne, J.W.

    1988-12-01

    Pacific Northwest Laboratory has completed an initial investigation of the effects of physical and chemical properties of biomass feedstocks relative to their performance in biomass energy conversion systems. Both biochemical conversion routes (anaerobic digestion and ethanol fermentation) and thermochemical routes (combustion, pyrolysis, and gasification) were included in the study. Related processes including chemical and physical pretreatment to improve digestibility, and size and density modification processes such as milling and pelletizing were also examined. This overview report provides background and discussion of feedstock and conversion relationships, along with recommendations for future research. The recommendations include (1) coordinate production and conversion research programs; (2) quantify the relationship between feedstock properties and conversion priorities; (3) develop a common framework for evaluating and characterizing biomass feedstocks; (4) include conversion effects as part of the criteria for selecting feedstock breeding programs; and (5) continue emphasis on multiple feedstock/conversion options for biomass energy systems. 9 refs., 3 figs., 2 tabs.

  4. Biogas energy production from tropical biomass wastes by anaerobic digestion.

    PubMed

    Ge, Xumeng; Matsumoto, Tracie; Keith, Lisa; Li, Yebo

    2014-10-01

    Anaerobic digestion (AD) is an attractive technology in tropical regions for converting locally abundant biomass wastes into biogas which can be used to produce heat, electricity, and transportation fuels. However, investigations on AD of tropical forestry wastes, such as albizia biomass and food wastes, such as taro, papaya, and sweet potato, are limited. In this study, these tropical biomass wastes were evaluated for biogas production by liquid AD (L-AD) and/or solid-state AD (SS-AD), depending on feedstock characteristics. When albizia leaves and chips were used as feedstocks, L-AD had greater methane yields (161 and 113 L kg(-1)VS, respectively) than SS-AD (156.8 and 59.6 L kg(-1)VS, respectively), while SS-AD achieved 5-fold higher volumetric methane productivity than L-AD. Mono-digestion and co-digestion of taro skin, taro flesh, papaya, and sweet potato achieved methane yields from 345 to 411 L kg(-1)VS, indicating the robustness of AD technology. PMID:25022835

  5. Biomass resources for energy in Ohio: The OH-MARKAL modeling framework

    NASA Astrophysics Data System (ADS)

    Shakya, Bibhakar

    The latest reports from the Intergovernmental Panel on Climate Change have indicated that human activities are directly responsible for a significant portion of global warming trends. In response to the growing concerns regarding climate change and efforts to create a sustainable energy future, biomass energy has come to the forefront as a clean and sustainable energy resource. Biomass energy resources are environmentally clean and carbon neutral with net-zero carbon dioxide (CO2) emissions, since CO2 is absorbed or sequestered from the atmosphere during the plant growth. Hence, biomass energy mitigates greenhouse gases (GHG) emissions that would otherwise be added to the environment by conventional fossil fuels, such as coal. The use of biomass resources for energy is even more relevant in Ohio, as the power industry is heavily based on coal, providing about 90 percent of the state's total electricity while only 50 percent of electricity comes from coal at the national level. The burning of coal for electricity generation results in substantial GHG emissions and environmental pollution, which are responsible for global warming and acid rain. Ohio is currently one of the top emitters of GHG in the nation. This dissertation research examines the potential use of biomass resources by analyzing key economic, environmental, and policy issues related to the energy needs of Ohio over a long term future (2001-2030). Specifically, the study develops a dynamic linear programming model (OH-MARKAL) to evaluate biomass cofiring as an option in select coal power plants (both existing and new) to generate commercial electricity in Ohio. The OH-MARKAL model is based on the MARKAL (MARKet ALlocation) framework. Using extensive data on the power industry and biomass resources of Ohio, the study has developed the first comprehensive power sector model for Ohio. Hence, the model can serve as an effective tool for Ohio's energy planning, since it evaluates economic and environmental

  6. Do biomass harvesting guidelines influence herpetofauna following harvests of logging residues for renewable energy?.

    PubMed

    Fritts, Sarah; Moorman, Christopher; Grodsky, Steven; Hazel, Dennis; Homyack, Jessica; Farrell, Chris; Castleberry, Steven

    2016-04-01

    Forests are a major supplier of renewable energy; however, gleaning logging residues for use as woody biomass feedstock could negatively alter habitat for species dependent on downed wood. Biomass Harvesting Guidelines (BHGs) recommend retaining a portion of woody biomass on the forest floor following harvest. Despite BHGs being developed to help ensure ecological sustainability, their contribution to biodiversity has not been evaluated experimentally at operational scales. We compared herpetofauanal evenness, diversity, and richness and abundance of Anaxyrus terrestris and Gastrophryne carolinensis among six treatments that varied in volume and spatial arrangement of woody biomass retained after clearcutting loblolly pine (Pinus taeda) plantations in North Carolina, USA (n = 4), 2011-2014 and Georgia (n = 4), USA 2011-2013. Treatments were: (1) biomass harvest with no BHGs, (2) 15% retention with biomass clustered, (3) 15% retention with biomass dispersed, (4) 30% retention with biomass clustered, (5) 30% retention with biomass dispersed, and (6) no biomass harvest. We captured individuals with drift fence arrays and compared evenness, diversity, and richness metrics among treatments with repeated-measure, linear mixed-effects models. We determined predictors of A. terrestris and G. carolinensis abundances using a priori candidate N-mixture models with woody biomass volume, vegetation structure, and groundcover composition as covariates. We had 206 captures of 25 reptile species and 8710 captures of 17 amphibian species during 53690 trap nights. Herpetofauna diversity, evenness, and richness were similar among treatments. A. terrestris abundance was negatively related to volume of retained woody biomass in treatment units in North Carolina in 2013. G. carolinensis abundance was positively related with volume of retained woody debris in treatment units in Georgia in 2012. Other relationships between A. terrestris and G. carolinensis abundances and habitat metrics

  7. Switchgrass biomass energy storage project. Final report, September 23, 1996--December 31, 1996

    SciTech Connect

    Miller, G.A.; Teel, A.; Brown, S.S.

    1996-07-01

    The Chariton Valley Biomass Power Project, sponsored by the Chariton Valley RC&D Inc., a USDA-sponsored rural development organization, the Iowa Department of Natural Resources Energy Bureau (IDNR-EB), and IES Utilities, a major Iowa energy company, is directed at the development of markets for energy crops in southern Iowa. This effort is part of a statewide coalition of public and private interests cooperating to merge Iowa`s agricultural potential and its long-term energy requirements to develop locally sustainable sources of biomass fuel. The four-county Chariton Valley RC&D area (Lucas, Wayne, Appanoose and Monroe counties) is the site of one of eleven NREL/EPRI feasibility studies directed at the potential of biomass power. The focus of renewable energy development in the region has centered around the use of swithgrass (Panicum virgatum, L.). This native Iowa grass is one of the most promising sustainable biomass fuel crops. According to investigations by the U.S. Department of Energy (DOE), switchgrass has the most potential of all the perennial grasses and legumes evaluated for biomass production.

  8. Glucanocellulosic ethanol: the undiscovered biofuel potential in energy crops and marine biomass.

    PubMed

    Falter, Christian; Zwikowics, Claudia; Eggert, Dennis; Blümke, Antje; Naumann, Marcel; Wolff, Kerstin; Ellinger, Dorothea; Reimer, Rudolph; Voigt, Christian A

    2015-01-01

    Converting biomass to biofuels is a key strategy in substituting fossil fuels to mitigate climate change. Conventional strategies to convert lignocellulosic biomass to ethanol address the fermentation of cellulose-derived glucose. Here we used super-resolution fluorescence microscopy to uncover the nanoscale structure of cell walls in the energy crops maize and Miscanthus where the typical polymer cellulose forms an unconventional layered architecture with the atypical (1, 3)-β-glucan polymer callose. This raised the question about an unused potential of (1, 3)-β-glucan in the fermentation of lignocellulosic biomass. Engineering biomass conversion for optimized (1, 3)-β-glucan utilization, we increased the ethanol yield from both energy crops. The generation of transgenic Miscanthus lines with an elevated (1, 3)-β-glucan content further increased ethanol yield providing a new strategy in energy crop breeding. Applying the (1, 3)-β-glucan-optimized conversion method on marine biomass from brown macroalgae with a naturally high (1, 3)-β-glucan content, we not only substantially increased ethanol yield but also demonstrated an effective co-fermentation of plant and marine biomass. This opens new perspectives in combining different kinds of feedstock for sustainable and efficient biofuel production, especially in coastal regions. PMID:26324382

  9. Glucanocellulosic ethanol: the undiscovered biofuel potential in energy crops and marine biomass

    PubMed Central

    Falter, Christian; Zwikowics, Claudia; Eggert, Dennis; Blümke, Antje; Naumann, Marcel; Wolff, Kerstin; Ellinger, Dorothea; Reimer, Rudolph; Voigt, Christian A.

    2015-01-01

    Converting biomass to biofuels is a key strategy in substituting fossil fuels to mitigate climate change. Conventional strategies to convert lignocellulosic biomass to ethanol address the fermentation of cellulose-derived glucose. Here we used super-resolution fluorescence microscopy to uncover the nanoscale structure of cell walls in the energy crops maize and Miscanthus where the typical polymer cellulose forms an unconventional layered architecture with the atypical (1, 3)-β-glucan polymer callose. This raised the question about an unused potential of (1, 3)-β-glucan in the fermentation of lignocellulosic biomass. Engineering biomass conversion for optimized (1, 3)-β-glucan utilization, we increased the ethanol yield from both energy crops. The generation of transgenic Miscanthus lines with an elevated (1, 3)-β-glucan content further increased ethanol yield providing a new strategy in energy crop breeding. Applying the (1, 3)-β-glucan-optimized conversion method on marine biomass from brown macroalgae with a naturally high (1, 3)-β-glucan content, we not only substantially increased ethanol yield but also demonstrated an effective co-fermentation of plant and marine biomass. This opens new perspectives in combining different kinds of feedstock for sustainable and efficient biofuel production, especially in coastal regions. PMID:26324382

  10. Transportation Energy Futures Series. Projected Biomass Utilization for Fuels and Power in a Mature Market

    SciTech Connect

    Ruth, M.; Mai, T.; Newes, E.; Aden, A.; Warner, E.; Uriarte, C.; Inman, D.; Simpkins, T.; Argo, A.

    2013-03-01

    The viability of biomass as transportation fuel depends upon the allocation of limited resources for fuel, power, and products. By focusing on mature markets, this report identifies how biomass is projected to be most economically used in the long term and the implications for greenhouse gas (GHG) emissions and petroleum use. In order to better understand competition for biomass between these markets and the potential for biofuel as a market-scale alternative to petroleum-based fuels, this report presents results of a micro-economic analysis conducted using the Biomass Allocation and Supply Equilibrium (BASE) modeling tool. The findings indicate that biofuels can outcompete biopower for feedstocks in mature markets if research and development targets are met. The BASE tool was developed for this project to analyze the impact of multiple biomass demand areas on mature energy markets. The model includes domestic supply curves for lignocellulosic biomass resources, corn for ethanol and butanol production, soybeans for biodiesel, and algae for diesel. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

  11. Transportation Energy Futures Series: Projected Biomass Utilization for Fuels and Power in a Mature Market

    SciTech Connect

    Ruth, M.; Mai, T.; Newes, E.; Aden, A.; Warner, E.; Uriarte, C.; Inman, D.; Simpkins, T.; Argo, A.

    2013-03-01

    The viability of biomass as transportation fuel depends upon the allocation of limited resources for fuel, power, and products. By focusing on mature markets, this report identifies how biomass is projected to be most economically used in the long term and the implications for greenhouse gas (GHG) emissions and petroleum use. In order to better understand competition for biomass between these markets and the potential for biofuel as a market-scale alternative to petroleum-based fuels, this report presents results of a micro-economic analysis conducted using the Biomass Allocation and Supply Equilibrium (BASE) modeling tool. The findings indicate that biofuels can outcompete biopower for feedstocks in mature markets if research and development targets are met. The BASE tool was developed for this project to analyze the impact of multiple biomass demand areas on mature energy markets. The model includes domestic supply curves for lignocellulosic biomass resources, corn for ethanol and butanol production, soybeans for biodiesel, and algae for diesel. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

  12. Supply and demand in energy and agriculture: Emitters of CO{sub 2} and possibilities for global biomass energy strategies

    SciTech Connect

    Ahamer, G.; Hubergasse, J.

    1996-12-31

    As seen from the perspective of global E3-modelling (= environment-economy-energy), the sectors of energy and of agriculture are double players situated in a field of tension: both exhibit growing emissions--but both also exhibit reduction potentials for CO{sub 2}, if areas are used for growth of biomass energy carriers. On the one hand, meeting food demand requires increasing agricultural land use in some regions, on the other hand in other regions, an important input of fossil fuels buys higher efficiency levels. In the First World, newly set-aside land can be used for biomass energy production. Before envisaging global strategies for CO{sub 2} emission reductions and more specifically for an enhanced use of biomass for energy, the present boundary conditions of the global energy and agricultural systems have to be analyzed. In a second step, a likely future development has to be contrasted with the desirable increase of bioenergy.

  13. Opportunities for utilization of non-conventional energy sources for biomass pretreatment.

    PubMed

    Singh, Rawel; Krishna, Bhavya B; Kumar, Jitendra; Bhaskar, Thallada

    2016-01-01

    The increasing concerns over the depletion of fossil resources and its associated geo-political issues have driven the entire world to move toward sustainable forms of energy. Pretreatment is the first step in any biochemical conversion process for the production of valuable fuels/chemicals from lignocellulosic biomass to eliminate the lignin and produce fermentable sugars by hydrolysis. Conventional techniques have several limitations which can be addressed by using them in tandem with non-conventional methods for biomass pretreatment. Electron beam and γ (gamma)-irradiation, microwave and ultrasound energies have certain advantages over conventional source of energy and there is an opportunity that these energies can be exploited for biomass pretreatment. PMID:26350883

  14. Biomass as a Sustainable Energy Source: An Illustration of Chemical Engineering Thermodynamic Concepts

    ERIC Educational Resources Information Center

    Mohan, Marguerite A.; May, Nicole; Assaf-Anid, Nada M.; Castaldi, Marco J.

    2006-01-01

    The ever-increasing global demand for energy has sparked renewed interest within the engineering community in the study of sustainable alternative energy sources. This paper discusses a power generation system which uses biomass as "fuel" to illustrate the concepts taught to students taking a graduate level chemical engineering process…

  15. Emission reductions from woody biomass waste for energy as an alternative to open burning.

    PubMed

    Springsteen, Bruce; Christofk, Tom; Eubanks, Steve; Mason, Tad; Clavin, Chris; Storey, Brett

    2011-01-01

    Woody biomass waste is generated throughout California from forest management, hazardous fuel reduction, and agricultural operations. Open pile burning in the vicinity of generation is frequently the only economic disposal option. A framework is developed to quantify air emissions reductions for projects that alternatively utilize biomass waste as fuel for energy production. A demonstration project was conducted involving the grinding and 97-km one-way transport of 6096 bone-dry metric tons (BDT) of mixed conifer forest slash in the Sierra Nevada foothills for use as fuel in a biomass power cogeneration facility. Compared with the traditional open pile burning method of disposal for the forest harvest slash, utilization of the slash for fuel reduced particulate matter (PM) emissions by 98% (6 kg PM/BDT biomass), nitrogen oxides (NOx) by 54% (1.6 kg NOx/BDT), nonmethane volatile organics (NMOCs) by 99% (4.7 kg NMOCs/BDT), carbon monoxide (CO) by 97% (58 kg CO/BDT), and carbon dioxide equivalents (CO2e) by 17% (0.38 t CO2e/BDT). Emission contributions from biomass processing and transport operations are negligible. CO2e benefits are dependent on the emission characteristics of the displaced marginal electricity supply. Monetization of emissions reductions will assist with fuel sourcing activities and the conduct of biomass energy projects. PMID:21305889

  16. 29 CFR 24.114 - District court jurisdiction of retaliation complaints under the Energy Reorganization Act.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 1 2012-07-01 2012-07-01 false District court jurisdiction of retaliation complaints under the Energy Reorganization Act. 24.114 Section 24.114 Labor Office of the Secretary of Labor PROCEDURES FOR THE HANDLING OF RETALIATION COMPLAINTS UNDER THE EMPLOYEE PROTECTION PROVISIONS OF...

  17. 29 CFR 24.114 - District court jurisdiction of retaliation complaints under the Energy Reorganization Act.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 1 2013-07-01 2013-07-01 false District court jurisdiction of retaliation complaints under the Energy Reorganization Act. 24.114 Section 24.114 Labor Office of the Secretary of Labor PROCEDURES FOR THE HANDLING OF RETALIATION COMPLAINTS UNDER THE EMPLOYEE PROTECTION PROVISIONS OF...

  18. 29 CFR 24.114 - District court jurisdiction of retaliation complaints under the Energy Reorganization Act.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 1 2011-07-01 2011-07-01 false District court jurisdiction of retaliation complaints under the Energy Reorganization Act. 24.114 Section 24.114 Labor Office of the Secretary of Labor PROCEDURES FOR THE HANDLING OF RETALIATION COMPLAINTS UNDER THE EMPLOYEE PROTECTION PROVISIONS OF...

  19. 29 CFR 24.114 - District court jurisdiction of retaliation complaints under the Energy Reorganization Act.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 1 2014-07-01 2013-07-01 true District court jurisdiction of retaliation complaints under the Energy Reorganization Act. 24.114 Section 24.114 Labor Office of the Secretary of Labor PROCEDURES FOR THE HANDLING OF RETALIATION COMPLAINTS UNDER THE EMPLOYEE PROTECTION PROVISIONS OF...

  20. A Review on Biomass Torrefaction Process and Product Properties for Energy Applications

    SciTech Connect

    Jaya Shankar Tumuluru; Shahab Sokhansanj; J. Richard Hess; Christopher T. Wright; Richard D. Boardman

    2011-10-01

    Torrefaction of biomass can be described as a mild form of pyrolysis at temperatures typically ranging between 200 and 300 C in an inert and reduced environment. Common biomass reactions during torrefaction include devolatilization, depolymerization, and carbonization of hemicellulose, lignin and cellulose. Torrefaction process produces a brown to black solid uniform product and also condensable (water, organics, and lipids) and non condensable gases (CO2, CO, and CH4). Typically during torrefaction, 70% of the mass is retained as a solid product, containing 90% of the initial energy content, and 30% of the lost mass is converted into condensable and non-condensable products. The system's energy efficiency can be improved by reintroducing the material lost during torrefaction as a source of heat. Torrefaction of biomass improves its physical properties like grindability; particle shape, size, and distribution; pelletability; and proximate and ultimate composition like moisture, carbon and hydrogen content, and calorific value. Carbon and calorific value of torrefied biomass increases by 15-25%, and moisture content reduces to <3% (w.b.). Torrefaction reduces grinding energy by about 70%, and the ground torrefied biomass has improved sphericity, particle surface area, and particle size distribution. Pelletization of torrefied biomass at temperatures of 225 C reduces specific energy consumption by two times and increases the capacity of the mill by two times. The loss of the OH group during torrefaction makes the material hydrophobic (loses the ability to attract water molecules) and more stable against chemical oxidation and microbial degradation. These improved properties make torrefied biomass particularly suitable for cofiring in power plants and as an upgraded feedstock for gasification.

  1. Energy Sources and Systems Analysis: 40 South Lincoln Redevelopment District (Full Report)

    SciTech Connect

    Not Available

    2011-08-01

    This report presents the results of a case study to analyze district energy systems for their potential use in a project that involves redeveloping 270 units of existing public housing, along with other nearby sites. When complete, the redevelopment project will encompass more than 900 mixed-income residential units, commercial and retail properties, and open space. The analysis estimated the hourly heating, cooling, domestic hot water, and electric loads required by the community; investigated potential district system technologies to meet those needs; and researched available fuel sources to power such systems.

  2. Energy Sources and Systems Analysis: 40 South Lincoln Redevelopment District (Short Report)

    SciTech Connect

    Not Available

    2011-08-01

    This report presents the a brief overview of the results of a case study to analyze district energy systems for their potential use in a project that involves redeveloping 270 units of existing public housing, along with other nearby sites. When complete, the redevelopment project will encompass more than 900 mixed-income residential units, commercial and retail properties, and open space. The analysis estimated the hourly heating, cooling, domestic hot water, and electric loads required by the community; investigated potential district system technologies to meet those needs; and researched available fuel sources to power such systems. A full report of this case study is also available.

  3. The implications of deregulation for biomass and renewable energy in California. Revision

    SciTech Connect

    Morris, G.

    1998-08-01

    The California legislature took up electric utility deregulation legislation during 1996, culminating in AB 1890, California`s landmark restructuring legislation. The legislation created a transition funding program for renewables. No permanent program for the support of renewable energy production extending beyond the end of the transition period (2002) is included in AB 1890. AB 1890 assigned to the California Energy Commission (CEC) the task of determining how to allocate the renewables transition funds between existing and new renewable generating sources, and among the various renewable energy technologies that are available for deployment in California. The California Environmental Protection Agency (Cal/EPA) was assigned the task of reporting to the legislature about the specific benefits provided by biomass energy production in California, and about policies that could shift some of the cost of biomass energy production away from the electric ratepayer, on to beneficiaries of the environmental benefits of biomass energy production. This study describes the development of the CEC and Cal/EPA reports to the California legislature, and provides an analysis of the major issues that were encountered during the course of their development. The study concludes with a consideration of the future prospects for biomass and renewable energy production in the state.

  4. Assessing District Energy Systems Performance Integrated with Multiple Thermal Energy Storages

    NASA Astrophysics Data System (ADS)

    Rezaie, Behnaz

    The goal of this study is to examine various energy resources in district energy (DE) systems and then DE system performance development by means of multiple thermal energy storages (TES) application. This study sheds light on areas not yet investigated precisely in detail. Throughout the research, major components of the heat plant, energy suppliers of the DE systems, and TES characteristics are separately examined; integration of various configurations of the multiple TESs in the DE system is then analysed. In the first part of the study, various sources of energy are compared, in a consistent manner, financially and environmentally. The TES performance is then assessed from various aspects. Then, TES(s) and DE systems with several sources of energy are integrated, and are investigated as a heat process centre. The most efficient configurations of the multiple TESs integrated with the DE system are investigated. Some of the findings of this study are applied on an actual DE system. The outcomes of this study provide insight for researchers and engineers who work in this field, as well as policy makers and project managers who are decision-makers. The accomplishments of the study are original developments TESs and DE systems. As an original development the Enviro-Economic Function, to balance the economic and environmental aspects of energy resources technologies in DE systems, is developed; various configurations of multiple TESs, including series, parallel, and general grid, are developed. The developed related functions are discharge temperature and energy of the TES, and energy and exergy efficiencies of the TES. The TES charging and discharging behavior of TES instantaneously is also investigated to obtain the charging temperature, the maximum charging temperature, the charging energy flow, maximum heat flow capacity, the discharging temperature, the minimum charging temperature, the discharging energy flow, the maximum heat flow capacity, and performance

  5. Individual biomass facility reports. Supplement to some employment and earnings implications of regional biomass energy utilization: New England and the Cornbelt States

    NASA Astrophysics Data System (ADS)

    Little, J. R.; Bell, S. E.; Blair, L. M.; Gove, R. M.; Stevenson, W.; Tamura, R. F.

    1981-08-01

    Research was conducted to determine the direct employment and earnings implications of regional biomass energy utilization. Details of the primary data collected during the course of the investigation are provided. A case studies approach was used to observe and analyze various biomass energy systems. Visits were made to existing biomass facilities and data on their operation and employment requirements were collected. Information on planned or potential future facilities was also obtained. When this information was analyzed, a fairly accurate picture of the current situation as well as the rate and direction of future development in biomass was attained. Separate descriptions are included for each facility visited or for each interview obtained. The facility reports are organized according to fuel cycle (wood-fuel, alcohol-fuel, municipal solid waste facilities, others).

  6. Assessing the interactions among U.S. climate policy, biomass energy, and agricultural trade

    SciTech Connect

    Wise, Marshall A.; McJeon, Haewon C.; Calvin, Katherine V.; Clarke, Leon E.; Kyle, G. Page

    2014-09-01

    Energy from biomass is potentially an important contributor to U.S. climate change mitigation efforts. However, an important consideration to large-scale implementation of bioenergy is that the production of biomass competes with other uses of land. This includes traditionally economically productive uses, such as agriculture and forest products, as well as storage of carbon in forests and non-commercial lands. In addition, in the future, biomass may be more easily traded, meaning that increased U.S. reliance on bioenergy could come with it greater reliance on imported energy. Several approaches could be implemented to address these issues, including limits on U.S. biomass imports and protection of U.S. and global forests. This paper explores these dimensions of bioenergy’s role in U.S. climate policy and the relationship to these alternative measures for ameliorating the trade and land use consequences of bioenergy. It first demonstrates that widespread use of biomass in the U.S. could lead to imports; and it highlights that the relative stringency of domestic and international carbon mitigation policy will heavily influence the degree to which it is imported. Next, it demonstrates that while limiting biomass imports would prevent any reliance on other countries for this energy supply, it would most likely alter the balance of trade in other agricultural products against which biomass competes; for example, it might turn the U.S. from a corn exporter to a corn importer. Finally, it shows that increasing efforts to protect both U.S. and international forests could also affect the balance of trade in other agricultural products.

  7. Biomass recycle as a means to improve the energy efficiency of CELSS algal culture systems

    NASA Technical Reports Server (NTRS)

    Radmer, R.; Cox, J.; Lieberman, D.; Behrens, P.; Arnett, K.

    1987-01-01

    Algal cultures can be very rapid and efficient means to generate biomass and regenerate the atmosphere for closed environmental life support systems. However, as in the case of most higher plants, a significant fraction of the biomass produced by most algae cannot be directly converted to a useful food product by standard food technology procedures. This waste biomass will serve as an energy drain on the overall system unless it can be efficiently recycled without a significant loss of its energy content. Experiments are reported in which cultures of the alga Scenedesmus obliquus were grown in the light and at the expense of an added carbon source, which either replaced or supplemented the actinic light. As part of these experiments, hydrolyzed waste biomass from these same algae were tested to determine whether the algae themselves could be made part of the biological recycling process. Results indicate that hydrolyzed algal (and plant) biomass can serve as carbon and energy sources for the growth of these algae, suggesting that the efficiency of the closed system could be significantly improved using this recycling process.

  8. {open_quotes}Understanding district energy customer behavior - the key to getting customers and keeping them happy{close_quotes}

    SciTech Connect

    Kattner, J.F.

    1995-09-01

    The market share achieved by district energy systems is frequently represented as a percentage of a particular country`s total energy consumption, or as a percentage of the energy used for heating and cooling. While such characterizations of district energy`s market share are valid and important from a producer`s perspective, the position of the customer is not well represented. The effectiveness of communicating market share in this way greatly depends on the district energy customers` knowledge about the local, regional and national energy markets. It also fails to take into account the differences among customer buildings and their individual energy consumption patterns. An alternative view of market share is suggested when the perspective of the district energy markets shifts from that of the producer`s to the ends user`s. End users of district energy typically are responsible for the ownership and/or the operation of a building. This includes providing energy for comfort, lighting and any processes being conducted in the building. Fundamentally, district energy customers are in the property management business. Their business operations are represented and rated with respect to the building area they manage. Frequently, several buildings are managed by one company. An extensive amount of research has been done about the behavior of consumers when making buying decisions. This includes the fact that product and service buying behavior differs. Also, the field of customer satisfaction is rich with clues on how to keep our customers happy with their decisions to use district energy. This report presents key considerations about buyer behavior and customer satisfaction as they relate to marketing in the district energy field.

  9. The Role of the Latvian District Heating System in the Development of Sustainable Energy Supply

    NASA Astrophysics Data System (ADS)

    Bazbauers, Gatis; Cimdina, Ginta

    2011-01-01

    The aim of the study is to determine whether and to what extent it is possible to use excess electricity produced by wind power plants during low demand periods for district heat production by heat pumps. Energy system analysis on an hourly basis is conducted at various capacities of wind power plants. The results show that it is possible to increase the share of renewable energy sources, decrease the use of primary energy sources and CO2 emissions per unit of the produced energy, i.e. heat and electricity, by using the surplus electricity produced by wind power in the heat pumps combined with the heat storage.

  10. Evaluation energy efficiency of bioconversion knot rejects to ethanol in comparison to other thermochemically pretreated biomass.

    PubMed

    Wang, Zhaojiang; Qin, Menghua; Zhu, J Y; Tian, Guoyu; Li, Zongquan

    2013-02-01

    Rejects from sulfite pulp mill that otherwise would be disposed of by incineration were converted to ethanol by a combined physical-biological process that was comprised of physical refining and simultaneous saccharification and fermentation (SSF). The energy efficiency was evaluated with comparison to thermochemically pretreated biomass, such as those pretreated by dilute acid (DA) and sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL). It was observed that the structure deconstruction of rejects by physical refining was indispensable to effective bioconversion but more energy intensive than that of thermochemically pretreated biomass. Fortunately, the energy consumption was compensated by the reduced enzyme dosage and the elevated ethanol yield. Furthermore, adjustment of disk-plates gap led to reduction in energy consumption with negligible influence on ethanol yield. In this context, energy efficiency up to 717.7% was achieved for rejects, much higher than that of SPORL sample (283.7%) and DA sample (152.8%). PMID:23376154

  11. Energy densification of biomass-derived organic acids

    DOEpatents

    Wheeler, M. Clayton; van Walsum, G. Peter; Schwartz, Thomas J.; van Heiningen, Adriaan

    2013-01-29

    A process for upgrading an organic acid includes neutralizing the organic acid to form a salt and thermally decomposing the resulting salt to form an energy densified product. In certain embodiments, the organic acid is levulinic acid. The process may further include upgrading the energy densified product by conversion to alcohol and subsequent dehydration.

  12. Breeding Energy Cane Cultivars as a Biomass Feedstock for Coal Replacement

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Research and advanced breeding have demonstrated that energy cane possesses all of the attributes desirable in a biofuel feedstock: extremely good biomass yield in a small farming footprint; negative/neutral carbon footprint; maximum outputs from minimum inputs; well-established growing model for fa...

  13. Second biomass conference of the Americas: Energy, environment, agriculture, and industry. Proceedings

    SciTech Connect

    1995-01-01

    This volume provides the proceedings for the Second Biomass Conference of the Americas: Energy, Environment, Agriculture, and Industry which was held August 21-24, 1995. The volume contains copies of full papers as provided by the researchers. Individual papers were separately indexed and abstracted for the database.

  14. ENVIRONMENTAL AND ECONOMIC COMPARISON OF ADVANCED PROCESSES FOR CONVERSION OF COAL AND BIOMASS INTO CLEAN ENERGY

    EPA Science Inventory

    Biomass and coal conversion into clean energy is compared on an economic and environmental basis in three regional scenarios: (1) electric power from direct combustion of wood versus conventional coal combustion in the South Central U.S., (2) synthetic pipeline gas from anaerobic...

  15. Advanced system demonstration for utilization of biomass as an energy source

    SciTech Connect

    Not Available

    1980-10-01

    The results of a 20 month study to explore the technical and economic feasibility of fuelwood utilization to operate a 50 megawatt energy conversion facility are described. The availability of biomass as a fuel source, the methods of harvesting and collecting the fuelstock, the costs of providing adequate fuel to the plant, and other requirements for fueling the proposed conversion facility are investigated. (MHR)

  16. Biomass energy systems program summary. Information current as of September 30, 1979

    SciTech Connect

    Not Available

    1980-10-01

    This program summary describes each of the DOE's Biomass Energy System's projects funded or in existence during fiscal year 1979 and reflects their status as of September 30, 1979. The summary provides an overview of the ongoing research, development, and demonstration efforts of the preceding fiscal year as well. (DMC)

  17. Biomass Logistics

    SciTech Connect

    J. Richard Hess; Kevin L. Kenney; William A. Smith; Ian Bonner; David J. Muth

    2015-04-01

    Equipment manufacturers have made rapid improvements in biomass harvesting and handling equipment. These improvements have increased transportation and handling efficiencies due to higher biomass densities and reduced losses. Improvements in grinder efficiencies and capacity have reduced biomass grinding costs. Biomass collection efficiencies (the ratio of biomass collected to the amount available in the field) as high as 75% for crop residues and greater than 90% for perennial energy crops have also been demonstrated. However, as collection rates increase, the fraction of entrained soil in the biomass increases, and high biomass residue removal rates can violate agronomic sustainability limits. Advancements in quantifying multi-factor sustainability limits to increase removal rate as guided by sustainable residue removal plans, and mitigating soil contamination through targeted removal rates based on soil type and residue type/fraction is allowing the use of new high efficiency harvesting equipment and methods. As another consideration, single pass harvesting and other technologies that improve harvesting costs cause biomass storage moisture management challenges, which challenges are further perturbed by annual variability in biomass moisture content. Monitoring, sampling, simulation, and analysis provide basis for moisture, time, and quality relationships in storage, which has allowed the development of moisture tolerant storage systems and best management processes that combine moisture content and time to accommodate baled storage of wet material based upon “shelf-life.” The key to improving biomass supply logistics costs has been developing the associated agronomic sustainability and biomass quality technologies and processes that allow the implementation of equipment engineering solutions.

  18. The implications of deregulation for biomass and renewable energy in California

    SciTech Connect

    Morris, G

    1998-07-01

    California has been leading the nation down the path of electric utility deregulation, beginning with the April 1994, California Public Utilities Commission`s (CPUC) Blue Book restructuring proposal. The road for renewable energy producers has been particularly rocky, leaving the future of renewable energy production very much in doubt. The original CPUC proposal provided for competition among generating sources on the basis of price alone, without regard for environmental considerations. The California legislature took up electric utility deregulation legislation during 1996, culminating in AB 1890, California`s landmark restructuring legislation, which was passed unanimously by the Senate and Assembly, and signed into law by the governor on September 28, 1996. AB 1890 assigned to the California Energy Commission (CEC) the task of determining how to allocate the renewables transition funds between existing and new renewable generating sources, and among the various renewable energy technologies that are available for deployment in California. The California Environmental Protection Agency (Cal/EPA) was assigned the task of reporting to the legislature about the specific benefits provided by biomass energy production in California, and about policies that could shift some of the cost of biomass energy production away from the electric ratepayer, on to beneficiaries of the environmental benefits of biomass energy production. This study describes the development of the CEC and Cal/EPA reports to the California legislature, and provides an analysis of the major issues that were encountered during the course of their development. The study concludes with a consideration of the future prospects for biomass and renewable energy production in the state.

  19. Clean energy for development and economic growth: Biomass and other renewable options to meet energy and development needs in poor nations

    SciTech Connect

    Lilley, Art; Pandey, Bikash; Karstad, Elsen; Owen, Matthew; Bailis, Robert; Ribot, Jesse; Masera, Omar; Diaz, Rodolpho; Benallou, Abdelahanine; Lahbabi, Abdelmourhit

    2012-10-01

    The document explores the linkages between renewable energy, poverty alleviation, sustainable development, and climate change in developing countries. In particular, the paper places emphasis on biomass-based energy systems. Biomass energy has a number of unique attributes that make it particularly suitable to climate change mitigation and community development applications.

  20. Perspectives of biomass as an energy source in the Dominican Republic

    SciTech Connect

    Acosta, J.R.

    1980-12-01

    This paper describes the contribution of biomass to the supply of primary energy in the Dominican Republic through its history. In 1978 this contribution was equivalent to 6.94 x 10/sup 6/ boe, which represented 32% of the primary energy supply. This percentage has been diminishing continuously and more rapidly during the last two decades due to the rapid growth of oil consumption in this period. Even though a decrease in the rate of participation of biomass to the total energy supply has occurred, the demand of wood and charcoal by the household sector and small industries increases daily due to the population growth and the relative increase of its purchasing power. Recent studies showed biomass can play an important role in the Dominican Republic as a source of renewable energy. There is a significant potential for energy farming, biogas and fuel alcohol production. Agricultural wastes in the country have been evaluated and it has been found that their potential represents a considerable and non exploited energy resource.

  1. Investigation on a summer operation effect of a district energy system at Kitakyushu science research city

    SciTech Connect

    Gao, Weijun; Zhou, Nan; Nishida, Masaru; Sagara, Noriyasu; Ryu, Yuji; Ojima, Toshio

    2004-05-24

    In Kitakyushu Science and Research Park, a new district energy system has been introduced. In this study, we chose this system as a case study and have carried out an analysis on the efficiency of the power generation and heat release utilization of the fuel cell and gas engine in summer by using the recorded data. The results can be summarized as follows; (1) Although the power generation efficiencies of the gas engine and fuel cell are a little bit lower than the standard designated value, they are almost running at stable condition. (2) The collected heat energy is lower than the designated value. The heat release utilization, which is used for cooling and hot water, is fairly low. Considering the efficient use of energy, it is a key to have a good use of heat release when we introduce a district energy system. (3) The discarded heat energy of the system is very big in this investigation when evaluating the system as a whole. It is fundamental to the future of energy conservation to use primary energy more efficiently.

  2. Integrated biomass energy system for Illinois agriculture. Final report

    SciTech Connect

    Day, D.L.; Steinberg, M.P.; Rodda, E.D.; Hunt, D.R.

    1988-05-01

    There is considerable interest in the corn belt region of the USA for producing grain alcohol on farms as liquid fuel for tractors, combines, and trucks used in farming operations. Opportunities appear to exist for fuel-alcohol production on a small scale by individual farmers and local groups. Two major energy consumers in beverage-type alcohol plants are the drying of stillage residues and the fueling the distillation plant. These large energy costs have roused interest in product conservation and fuel-saving methods by using spent stillage as livestock feed and using manure-produced biogas as the process fuel for the alcohol plant. Sludge from the biogas plant also can be distributed onto the cropland to furnish some of the needed crop nutrients.

  3. Don't forget alternate energy sources: biomass, geothermal, wind

    SciTech Connect

    Miskell, J.T.

    1981-01-01

    The United States is probably the most fortunate country in the world in terms of potential energy resources, and that is part of the problem in developing alternate sources. Which ones should be given preference, and which ones will give the quickest, most economic return on investment. The exploration of converting potential plant life to energy is already underway. One such plant is the milkweed. The milky latex substance of the weed contains 30% hydrocarbon and 70% water. About 7% to 10% of the plant weight is extractable crude oil. The unused plant residue can be processed to produce alcohol. In Utah, a milkweed project yielded 2.5 pounds of oil from 35 lbs. of milkweed. The California Commission is looking into the possibility of using two million tons of rice straw, now left in the fields to be burned. The basic thrust of geothermal activity is still the dry steam plants in the Geyser field in California, but the movement to develop more prevalent hot water persists. Binary production and the use of moderate hot water are gaining in acceptance. The government's goal for wind for the year 2000 is 2% of total energy usage. Both utility and consumer participation will be required to meet that goal. Utilities will have to install 20,000 to 30,000 large-scale machines and nearly 1 million would have to be installed by consumers for homes and farms. Movement is already underway.

  4. Energy and exergy analyses of a biomass-based hydrogen production system.

    PubMed

    Cohce, M K; Dincer, I; Rosen, M A

    2011-09-01

    In this paper, a novel biomass-based hydrogen production plant is investigated. The system uses oil palm shell as a feedstock. The main plant processes are biomass gasification, steam methane reforming and shift reaction. The modeling of the gasifier uses the Gibbs free energy minimization approach and chemical equilibrium considerations. The plant, with modifications, is simulated and analyzed thermodynamically using the Aspen Plus process simulation code (version 11.1). Exergy analysis, a useful tool for understanding and improving efficiency, is used throughout the investigation, in addition to energy analysis. The overall performance of the system is evaluated, and its efficiencies become 19% for exergy efficiency and 22% energy efficiency while the gasifier cold gas efficiency is 18%. PMID:21724387

  5. A decision model for cost effective design of biomass based green energy supply chains.

    PubMed

    Yılmaz Balaman, Şebnem; Selim, Hasan

    2015-09-01

    The core driver of this study is to deal with the design of anaerobic digestion based biomass to energy supply chains in a cost effective manner. In this concern, a decision model is developed. The model is based on fuzzy multi objective decision making in order to simultaneously optimize multiple economic objectives and tackle the inherent uncertainties in the parameters and decision makers' aspiration levels for the goals. The viability of the decision model is explored with computational experiments on a real-world biomass to energy supply chain and further analyses are performed to observe the effects of different conditions. To this aim, scenario analyses are conducted to investigate the effects of energy crop utilization and operational costs on supply chain structure and performance measures. PMID:25983228

  6. Biomass energy: State of the technology present obstacles and future potential

    SciTech Connect

    Dobson, L.

    1993-06-23

    The prevailing image of wood and waste burning as dirty and environmentally harmful is no longer valid. The use of biomass combustion for energy can solve many of our nation`s problems. Wood and other biomass residues that are now causing expensive disposal problems can be burned as cleanly and efficiently as natural gas, and at a fraction of the cost. New breakthroughs in integrated waste-to-energy systems, from fuel handling, combustion technology and control systems to heat transfer and power generation, have dramatically improved system costs, efficiencies, cleanliness of emissions, maintenance-free operation, and end-use applications. Increasing costs for fossil fuels and for waste disposal strict environmental regulations and changing political priorities have changed the economics and rules of the energy game. This report will describe the new rules, new playing fields and key players, in the hope that those who make our nation`s energy policy and those who play in the energy field will take biomass seriously and promote its use.

  7. Biomass pyrolysis for biochar or energy applications? A life cycle assessment.

    PubMed

    Peters, Jens F; Iribarren, Diego; Dufour, Javier

    2015-04-21

    The application of biochar as a soil amendment is a potential strategy for carbon sequestration. In this paper, a slow pyrolysis system for generating heat and biochar from lignocellulosic energy crops is simulated and its life-cycle performance compared with that of direct biomass combustion. The use of the char as biochar is also contrasted with alternative use options: cofiring in coal power plants, use as charcoal, and use as a fuel for heat generation. Additionally, the influence on the results of the long-term stability of the biochar in the soil, as well as of biochar effects on biomass yield, is evaluated. Negative greenhouse gas emissions are obtained for the biochar system, indicating a significant carbon abatement potential. However, this is achieved at the expense of lower energy efficiency and higher impacts in the other assessed categories when compared to direct biomass combustion. When comparing the different use options of the pyrolysis char, the most favorable result is obtained for char cofiring substituting fossil coal, even assuming high long-term stability of the char. Nevertheless, a high sensitivity to biomass yield increase is found for biochar systems. In this sense, biochar application to low-quality soils where high yield increases are expected would show a more favorable performance in terms of global warming. PMID:25830564

  8. Effect of biomass feedstock chemical and physical properties on energy conversion processes: Volume 2, Appendices

    SciTech Connect

    Butner, R.S.; Elliott, D.C.; Sealock, L.J., Jr.; Pyne, J.W.

    1988-12-01

    This report presents an exploration of the relationships between biomass feedstocks and the conversion processes that utilize them. Specifically, it discusses the effect of the physical and chemical structure of biomass on conversion yields, rates, and efficiencies in a wide variety of available or experimental conversion processes. A greater understanding of the complex relationships between these conversion systems and the production of biomass for energy uses is required to help optimize the complex network of biomass production, collection, transportation, and conversion to useful energy products. The review of the literature confirmed the scarcity of research aimed specifically at identifying the effect of feedstock properties on conversion. In most cases, any mention of feedstock-related effects was limited to a few brief remarks (usually in qualitative terms) in the conclusions, or as a topic for further research. Attempts to determine the importance of feedstock parameters from published data were further hampered by the lack of consistent feedstock characterization and the difficulty of comparing results between different experimental systems. Further research will be required to establish quantitative relationships between feedstocks and performance criteria in conversion. 127 refs., 4 figs., 7 tabs.

  9. Changes in the Cost of Energy in One State's School Districts. Issues & Answers. REL 2010-No. 088

    ERIC Educational Resources Information Center

    Cymrot, Donald J.; Martinez, Miguel; Jones, Joseph F.

    2010-01-01

    To support the work of Tennessee's Energy Efficient Schools Initiative (EESI) Council, this report describes data on energy expenditures in school districts for 2002/03-2007/08. Energy expenditures rose from about 2.6 percent to about 3.0 percent of total expenditures over the period, with some differences in the mix of energy types and…

  10. Atmospheric Emissions from Forest Biomass Residues to Energy Supply Chain: A Case Study in Portugal

    PubMed Central

    Rafael, Sandra; Tarelho, Luis; Monteiro, Alexandra; Monteiro, Tânia; Gonçalves, Catarina; Freitas, Sylvio; Lopes, Myriam

    2015-01-01

    Abstract During the past decades, pressures on global environment and energy security have led to an increasing demand on renewable energy sources and diversification of the world's energy supply. The Portuguese energy strategy considers the use of Forest Biomass Residues (FBR) to energy as being essential to accomplish the goals established in the National Energy Strategy for 2020. However, despite the advantages pointing to FBR to the energy supply chain, few studies have evaluated the potential impacts on air quality. In this context, a case study was selected to estimate the atmospheric emissions of the FBR to the energy supply chain in Portugal. Results revealed that production, harvesting, and energy conversion processes are the main culprits for the biomass energy supply chain emissions (with a contribution higher than 90%), while the transport processes have a minor importance for all the pollutants. Compared with the coal-fired plants, the FBR combustion produces lower greenhouses emissions, on a mass basis of fuel consumed; the same is true for NOX and SO2 emissions. PMID:26064039

  11. Improving Biomass Yields: High Biomass, Low Input Dedicated Energy Crops to Enable a Full Scale Bioenergy Industry

    SciTech Connect

    2010-01-01

    Broad Funding Opportunity Announcement Project: Ceres is developing bigger and better grasses for use in biofuels. The bigger the grass yield, the more biomass, and more biomass means more biofuel per acre. Using biotechnology, Ceres is developing grasses that will grow bigger with less fertilizer than current grass varieties. Hardier, higher-yielding grass also requires less land to grow and can be planted in areas where other crops can’t grow instead of in prime agricultural land. Ceres is conducting multi-year trials in Arizona, Texas, Tennessee, and Georgia which have already resulted in grass yields with as much as 50% more biomass than yields from current grass varieties.

  12. Forest biomass as a source of renewable energy in Turkey

    SciTech Connect

    Tuerker, M.F.; Ayaz, H.; Kaygusuz, K.

    1999-10-01

    In Turkey illegal cutting takes place, which cannot be controlled. Legal cuttings have also been done by several state forest enterprises. As a result, the amount of wood raw material produced by forest enterprises legally and by forest villagers illegally has exceeded the potential capacity of the forest. According to the research related to Macka and other Turkish state forests, the state forests have been decreasing day by day. This is because the amount of wood raw material taken from the forests has exceeded the production potential of the forest. That study concluded that the Macka and other Turkish forests will be exhausted after 64 and 67 years, respectively. This study also examined both establishing and exploiting energy forests near the forest villages and producing fuel briquettes manufactured using the residues of agriculture, forestry, and stock breeding to diminish the demand for illegal fuel wood cutting from the state forests.

  13. Optimizing the torrefaction of mixed softwood by response surface methodology for biomass upgrading to high energy density.

    PubMed

    Lee, Jae-Won; Kim, Young-Hun; Lee, Soo-Min; Lee, Hyoung-Woo

    2012-07-01

    The optimal conditions for the torrefaction of mixed softwood were investigated by response surface methodology. This showed that the chemical composition of torrefied biomass was influenced by the severity factor of torrefaction. The lignin content in the torrefied biomass increased with the SF, while holocellulose content decreased. Similarly, the carbon content energy value of torrefied biomass ranged from 19.31 to 22.12 MJ/kg increased from 50.79 to 57.36%, while the hydrogen and oxygen contents decreased. The energy value of torrefied biomass ranged from 19.31 to 22.12 MJ/kg. This implied that the energy contained in the torrefied biomass increased by 4-19%, when compared with the untreated biomass. The energy value and weight loss in biomass slowly increased as the SF increased up until 6.12; and then dramatically increased as the SF increased further from 6.12 to 7.0. However, the energy yield started decreasing at SF value higher than 6.12; and the highest energy yield was obtained at low SF. PMID:22525262

  14. White Pine Co. Public School System Biomass Conversion Heating Project

    SciTech Connect

    Paul Johnson

    2005-11-01

    The White Pine County School District and the Nevada Division of Forestry agreed to develop a pilot project for Nevada using wood chips to heat the David E. Norman Elementary School in Ely, Nevada. Consideration of the project was triggered by a ''Fuels for Schools'' grant that was brought to the attention of the School District. The biomass project that was part of a district-wide energy retrofit, called for the installation of a biomass heating system for the school, while the current fuel oil system remained as back-up. Woody biomass from forest fuel reduction programs will be the main source of fuel. The heating system as planned and completed consists of a biomass steam boiler, storage facility, and an area for unloading and handling equipment necessary to deliver and load fuel. This was the first project of it's kind in Nevada. The purpose of the DOE funded project was to accomplish the following goals: (1) Fuel Efficiency: Purchase and install a fuel efficient biomass heating system. (2) Demonstration Project: Demonstrate the project and gather data to assist with further research and development of biomass technology; and (3) Education: Educate the White Pine community and others about biomass and other non-fossil fuels.

  15. Reducing Energy Consumption and Creating a Conservation Culture in Organizations: A Case Study of One Public School District

    ERIC Educational Resources Information Center

    Schelly, Chelsea; Cross, Jennifer E.; Franzen, William S.; Hall, Pete; Reeve, Stu

    2011-01-01

    How can existing schools significantly reduce their energy use? With energy costs rising and school budgets shrinking, energy use is a substantial cost that can be reduced through conservation efforts. Using a case study methodology, the authors compare two public high schools from the same school district, one that has achieved moderate energy…

  16. Energy from biomass and wastes V; Proceedings of the Fifth Symposium, Lake Buena Vista, FL, January 26-30, 1981

    NASA Astrophysics Data System (ADS)

    Papers are presented in the areas of biomass production and procurement, biomass and waste combustion, gasification processes, liquefaction processes, environmental effects and government programs. Specific topics include a water hyacinth wastewater treatment system with biomass production, the procurement of wood as an industrial fuel, the cofiring of densified refuse-derived fuel and coal, the net energy production in anaerobic digestion, photosynthetic hydrogen production, the steam gasification of manure in a fluidized bed, and biomass hydroconversion to synthetic fuels. Attention is also given to the economics of deriving alcohol for power applications from grain, ethanol fermentation in a yeast-immobilized column fermenter, a solar-fired biomass flash pyrolysis reactor, particulate emissions from controlled-air modular incinerators, and the DOE program for energy recovery from urban wastes.

  17. Implementing Systems Engineering in the U.S. Department of Energy Office of the Biomass Program: Preprint

    SciTech Connect

    Riley, C.; Wooley, R.; Sandor, D.

    2007-03-01

    This paper describes how the Systems Integration Office is assisting the Department of Energy's Biomass Program by using systems engineering processes, practices and tools to guide decisions and achieve goals.

  18. My Biomass, Your Biomass, Our Solution

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The US is pursuing an array of renewable energy sources to reduce reliance on imported fossil fuels and reduce greenhouse gas emissions. Biomass energy and biomass ethanol are key components in the pursuit. The need for biomass feedstock to produce sufficient ethanol to meet any of the numerous stat...

  19. Evaluating the economic costs, benefits and tradeoffs of dedicated biomass energy systems: The importance of scale

    SciTech Connect

    Graham, R.L.; Walsh, M.E.

    1995-12-31

    The economic and environmental costs, benefits and tradeoffs of bioenergy from dedicated biomass energy systems must be addressed in the context of the scale of interest. At different scales there are different economic and environmental features and processes to consider. The depth of our understanding of the processes and features that influence the potential of energy crops also varies with scale as do the quality and kinds of data that are needed and available. Finally, the appropriate models to use for predicting economic and environmental impacts change with the scale of the questions. This paper explores these issues at three scales - the individual firm, the community, and the nation.

  20. Common patterns of energy flow and biomass distribution on weighted food webs

    NASA Astrophysics Data System (ADS)

    Zhang, Jiang; Feng, Yuanjing

    2014-07-01

    Weights of edges and nodes on food webs which are available from the empirical data hide much information about energy flows and biomass distributions in ecosystem. We define a set of variables related to weights for each species i, including the throughflow Ti, the total biomass Xi, and the dissipated flow Di (output to the environment) to uncover the following common patterns in 19 empirical weighted food webs: (1) DGBD distributions (Discrete version of a Generalized Beta Distribution), a kind of deformed Zipf's law, of energy flow and storage biomass; (2) The allometric scaling law Ti∝Xiα, which can be viewed as the counterpart of the Kleiber's 3/4 law at the population level; (3) The dissipation law Di∝Tiβ; and (4) The gravity law, including univariate version f∝( and bivariate approvement f∝Tiγ1Tjγ2. These patterns are very common and significant in all collected webs, as a result, some remarkable regularities are hidden in weights.

  1. Current Research on Thermochemical Conversion of Biomass at the National Renewable Energy Laboratory

    SciTech Connect

    Baldwin, R. M.; Magrini-Bair, K. A.; Nimlos, M. R.; Pepiot, P.; Donohoe, B. S.; Hensley, J. E.; Phillips, S. D.

    2012-04-05

    The thermochemical research platform at the National Bioenergy Center, National Renewable Energy Laboratory (NREL) is primarily focused on conversion of biomass to transportation fuels using non-biological techniques. Research is conducted in three general areas relating to fuels synthesis via thermochemical conversion by gasification: (1) Biomass gasification fundamentals, chemistry and mechanisms of tar formation; (2) Catalytic tar reforming and syngas cleaning; and (3) Syngas conversion to mixed alcohols. In addition, the platform supports activities in both technoeconomic analysis (TEA) and life cycle assessment (LCA) of thermochemical conversion processes. Results from the TEA and LCA are used to inform and guide laboratory research for alternative biomass-to-fuels strategies. Detailed process models are developed using the best available material and energy balance information and unit operations models created at NREL and elsewhere. These models are used to identify cost drivers which then form the basis for research programs aimed at reducing costs and improving process efficiency while maintaining sustainability and an overall net reduction in greenhouse gases.

  2. Biomass energy crop production versus food crop production in the Caribbean

    SciTech Connect

    Sammuels, G.

    1983-12-01

    The Caribbean countries have traditionally grown sugar cane, coffee and bananas as major agriculture export crops. Food crop production was sufficient in most cases for domestic consumption. In recent years powerful social and economic changes of increasing population, industrial development and higher living standards have placed pressure on local governments to provide food, clothing, shelter and energy. Energy that is mainly supplied by imported oil. Biomass, primarily as sugar cane, can provide a solution, either partial or total, to the problem. Unfortunately, the arable land area for the majority of the countries is limited. Food crop production is needed for local consumption and export. Possible energy crop production to provide local needs will place an increasing demand on arable land. The objective of this paper is to present the scope of food versus energy crop production and a suggested renewable energy crop program to help achieve a balance within the limited land resources of the Caribbean.

  3. Fort Carson Building 1860 Biomass Heating Analysis Report

    SciTech Connect

    Hunsberger, Randolph; Tomberlin, Gregg; Gaul, Chris

    2015-09-01

    As part of the Army Net-Zero Energy Installation program, the Fort Carson Army Base requested that NREL evaluate the feasibility of adding a biomass boiler to the district heating system served by Building 1860. We have also developed an Excel-spreadsheet-based decision support tool--specific to the historic loads served by Building 1860--with which users can perform what-if analysis on gas costs, biomass costs, and other parameters. For economic reasons, we do not recommend adding a biomass system at this time.

  4. Energy Conservation and Management. Tried and Proven Energy Conservation Programs That Are Helping School Districts Improve the Energy Efficiency of Their Facilities.

    ERIC Educational Resources Information Center

    Stolberg, Charles G.

    A special 90-minute educational session of the Association of School Business Officials' annual meeting presented a series of mini-workshops, each featuring a school district or organization that had developed and/or implemented a successful program to reduce energy usage in schools. The 19 presenters at these mini-workshops included school…

  5. Biomass Energy R&D in the San Francisco Bay Area

    SciTech Connect

    Upadhye, R

    2005-12-07

    Biomass is plant matter such as trees, grasses, agricultural crops or other biological material. It can be used as a solid fuel, or converted into liquid or gaseous forms, for the production of electric power, heat, chemicals, or fuels. There are a number of ways of getting energy from biomass, and a number of factors influence the efficiency of the conversion process. All biomass can be easily combusted. The heat of combustion can be used as heat, or can be used to run gas/steam turbines to produce electricity. However, most biomass combustion processes are inefficient and environmentally non-benign. The main pollutants from direct biomass combustion are tars, particulates, and VOCs. Biodiesels can be made from oils obtained from plants/crops such as soybean, peanuts and cotton. The oils from these sources are mainly triglycerides of fatty acids and not directly suitable as diesel substitutes. Transesterification processes convert the triglycerides into simple esters of the corresponding fatty acids (for example, Fatty Acid Methyl Ester or FAME), which can be directly substitutes for diesel fuels. Starches, sugars and cellulose can be fermented to produce ethanol, which can be added to gasoline, or used directly as an engine fuel. Fermentation of starches and sugars is established technology, practiced for thousands of years. Fermentation of cellulose to make ethanol is relatively harder, requiring additional intermediate steps to hydrolyze the cellulose first by adding acids or by raising temperature. Forestry wastes predominantly comprise cellulose and lignin. Lignin cannot be fermented using the current bio-organisms, and, as mentioned above, even cellulose is difficult to ferment directly. In such cases, a suite of alternative technologies can be employed to convert the biomass into liquid fuels. For example, the biomass can be gasified with the use of air/oxygen and steam, the resultant syngas (mixture of hydrogen and carbon monoxide) can be cleaned to remove

  6. Experiments on torrefied wood pellet: study by gasification and characterization for waste biomass to energy applications

    PubMed Central

    Rollinson, Andrew N.; Williams, Orla

    2016-01-01

    Samples of torrefied wood pellet produced by low-temperature microwave pyrolysis were tested through a series of experiments relevant to present and near future waste to energy conversion technologies. Operational performance was assessed using a modern small-scale downdraft gasifier. Owing to the pellet's shape and surface hardness, excellent flow characteristics were observed. The torrefied pellet had a high energy density, and although a beneficial property, this highlighted the present inflexibility of downdraft gasifiers in respect of feedstock tolerance due to the inability to contain very high temperatures inside the reactor during operation. Analyses indicated that the torrefaction process had not significantly altered inherent kinetic properties to a great extent; however, both activation energy and pre-exponential factor were slightly higher than virgin biomass from which the pellet was derived. Thermogravimetric analysis-derived reaction kinetics (CO2 gasification), bomb calorimetry, proximate and ultimate analyses, and the Bond Work Index grindability test provided a more comprehensive characterization of the torrefied pellet's suitability as a fuel for gasification and also other combustion applications. It exhibited significant improvements in grindability energy demand and particle size control compared to other non-treated and thermally treated biomass pellets, along with a high calorific value, and excellent resistance to water. PMID:27293776

  7. Experiments on torrefied wood pellet: study by gasification and characterization for waste biomass to energy applications.

    PubMed

    Rollinson, Andrew N; Williams, Orla

    2016-05-01

    Samples of torrefied wood pellet produced by low-temperature microwave pyrolysis were tested through a series of experiments relevant to present and near future waste to energy conversion technologies. Operational performance was assessed using a modern small-scale downdraft gasifier. Owing to the pellet's shape and surface hardness, excellent flow characteristics were observed. The torrefied pellet had a high energy density, and although a beneficial property, this highlighted the present inflexibility of downdraft gasifiers in respect of feedstock tolerance due to the inability to contain very high temperatures inside the reactor during operation. Analyses indicated that the torrefaction process had not significantly altered inherent kinetic properties to a great extent; however, both activation energy and pre-exponential factor were slightly higher than virgin biomass from which the pellet was derived. Thermogravimetric analysis-derived reaction kinetics (CO2 gasification), bomb calorimetry, proximate and ultimate analyses, and the Bond Work Index grindability test provided a more comprehensive characterization of the torrefied pellet's suitability as a fuel for gasification and also other combustion applications. It exhibited significant improvements in grindability energy demand and particle size control compared to other non-treated and thermally treated biomass pellets, along with a high calorific value, and excellent resistance to water. PMID:27293776

  8. Solar Pond devices: free energy or bioreactors for Artemia biomass production?

    PubMed

    Gouveia, Luisa; Sousa, João; Marques, Ana; Tavares, Célia; Giestas, Margarida

    2009-08-01

    The recent exponential growth in industrial aquaculture has led to a huge increase in Artemia biomass production in order to meet increased fish production needs. The present study explores the potential use of salt gradient solar ponds (SGSPs) for production of Artemia nauplii. An SGSP is a basin of water where solar energy is trapped and collected via an artificially imposed gradient. Three zones can be identified in an SGSP: upper and lower zones, which are both convective, and a middle zone, which is intended to be non-convective. The latter acts as a transparent insulation layer and allows for storage of solar energy at the bottom, where it is available for use. The combination of salt, temperature and high transparency could make SGSPs promising bioreactors for the production of Artemia nauplii. Using particle image velocymetry (PIV) and Shadowgraph visualisation techniques, the behaviour of Artemia nauplii under critical cultivation parameters (namely, salinity, temperature and light) was monitored to determine movement velocity, and how movement of Artemia affects the salt gradient. It was observed that Artemia nauplii constantly follow light, irrespective of adverse salinity and/or temperature conditions. However, despite the substantial displacement of Artemia following the light source, the salt gradient is not disrupted. The suitability of SGSPs as bioreactors for Artemia biomass production was then tested. The results were disappointing, probably due to the lack of sufficient O(2) for Artemia survival and growth. Follow-up trials were conducted aimed at using the SGSP as a green and economically attractive energy source to induce faster hatching of cysts and improved Artemia nauplii growth. The results of these trials, and a case study of Artemia nauplii production using an SGSP, are presented. The authors constructed a Solar Pond device, which they suggest as a novel way of supplying thermal energy for Artemia biomass production in an aquaculture

  9. Biomass energy production. 1975-April, 1980 (citations from the International Aerospace Abstracts Data Base). Report for 1975-Apr 80

    SciTech Connect

    Moore, P.W.

    1980-06-01

    These citations from the international literature describe the production and/or utilization of most forms of biomass as a source of energy, fuel, food, and chemical intermediates or feedstocks. Biomass conversion by incineration, gasification, pyrolysis, hydrolysis, anaerobic digestion, or fermentation, as well as by catalytic, photosynthetic, chemosynthetic, and bio-electrochemical means are among the conversion processes considered. Discussions include biomass plantation and material productivity, transportation and equipment requirements, environmental effects, comparisons of means and efficiencies of utilization and conversion, assessments of limitations, and evaluations of economic potential. (Contains 210 abstracts)

  10. Health and safety implications of alternative energy technologies. I. Geothermal and biomass

    NASA Astrophysics Data System (ADS)

    Watson, A. P.; Etnier, E. L.

    1981-07-01

    An evaluation of potential occupational and public health aspects of geopressure, hydrothermal, hot dry rock, silviculture, crop and animal residues, fermentable plant products, municipal waste, and plantation energy technologies has been performed. Future development of these energy options in the United States will contain hazards that could easily be eliminated by safer equipment design and common-sense attention to operation and maintenance. Occupational exposure to hydrogen sulfide gas occurs near all geothermal sites and wherever organic matter decomposes anaerobically. Respiratory damage has occurred to laborers in geothermal fields, while farm workers have been fatally overcome when employed near agitating liquid manure systems. However, the most frequent and severe of reported injuries to geothermal workers is dermal exposure to caustic sludges produced by H2S abatement systems. Principal health and safety considerations of biomass pathways are directly related to the diffuse nature of solar energy fixation by photosynthesis and subsequent transfer to animal food chains. Since the potential fuel is in an unconcentrated form, cultivation, harvest, and transport are necessarily laborintensive. Thus, a significant potential for occupational injuries and fatalities exists. Of all biomass systems evaluated, direct burning of solid fuels presents the greatest public health risk. Data are presented to characterize the population at risk and the frequency and severity of injuries.

  11. Energy Efficiency Analysis: Biomass-to-Wheel Efficiency Related with Biofuels Production, Fuel Distribution, and Powertrain Systems

    PubMed Central

    Huang, Wei-Dong; Zhang, Y-H Percival

    2011-01-01

    Background Energy efficiency analysis for different biomass-utilization scenarios would help make more informed decisions for developing future biomass-based transportation systems. Diverse biofuels produced from biomass include cellulosic ethanol, butanol, fatty acid ethyl esters, methane, hydrogen, methanol, dimethyether, Fischer-Tropsch diesel, and bioelectricity; the respective powertrain systems include internal combustion engine (ICE) vehicles, hybrid electric vehicles based on gasoline or diesel ICEs, hydrogen fuel cell vehicles, sugar fuel cell vehicles (SFCV), and battery electric vehicles (BEV). Methodology/Principal Findings We conducted a simple, straightforward, and transparent biomass-to-wheel (BTW) analysis including three separate conversion elements -- biomass-to-fuel conversion, fuel transport and distribution, and respective powertrain systems. BTW efficiency is a ratio of the kinetic energy of an automobile's wheels to the chemical energy of delivered biomass just before entering biorefineries. Up to 13 scenarios were analyzed and compared to a base line case – corn ethanol/ICE. This analysis suggests that BEV, whose electricity is generated from stationary fuel cells, and SFCV, based on a hydrogen fuel cell vehicle with an on-board sugar-to-hydrogen bioreformer, would have the highest BTW efficiencies, nearly four times that of ethanol-ICE. Significance In the long term, a small fraction of the annual US biomass (e.g., 7.1%, or 700 million tons of biomass) would be sufficient to meet 100% of light-duty passenger vehicle fuel needs (i.e., 150 billion gallons of gasoline/ethanol per year), through up to four-fold enhanced BTW efficiencies by using SFCV or BEV. SFCV would have several advantages over BEV: much higher energy storage densities, faster refilling rates, better safety, and less environmental burdens. PMID:21765941

  12. RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

    SciTech Connect

    Sweeten, John; Annamalai, Kalyan; Auvermann, Brent; Mukhtar, Saqib; Capareda, Sergio C; Engler, Cady; Harman, Wyatte; Reddy, J N; DeOtte, Robert; Parker, David B; Stewart, B A

    2012-05-02

    The Texas Panhandle is regarded as the "Cattle Feeding Capital of the World", producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure /year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco—the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1

  13. RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

    SciTech Connect

    John M. Sweeten, Kalyan Annamalai Brent Auvermann Saqib Mukhtar Sergio C. Capareda Cady Engler Wyatte Harman J.N. Reddy, Robert DeOtte David B. Parker Dr. B.A. Stewart

    2012-05-03

    The Texas Panhandle is regarded as the 'Cattle Feeding Capital of the World', producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure/year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco - the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1

  14. RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

    SciTech Connect

    Sweeten, John M; Annamalai, Kalyan; Auvermann, Brent; Mukhtar, Saqib; Capareda, Sergio C.; Engler, Cady; Harman, Wyatte; Reddy, J N; DeOtte, Robert; Parker, David B.; Stewart, B. A.

    2012-05-03

    The Texas Panhandle is regarded as the "Cattle Feeding Capital of the World", producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure/year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco -- the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1

  15. RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

    SciTech Connect

    Kalyan Annamalai, John M. Sweeten, Brent W. Auvermann, Saqib Mukhtar, Sergio Caperada Cady R. Engler, Wyatte Harman Reddy JN Robert Deotte

    2012-05-03

    The Texas Panhandle is regarded as the 'Cattle Feeding Capital of the World', producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure/year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco - the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1

  16. Biomass energy technology annual technical progress report, FY 1982. Volume II. Technical summary

    SciTech Connect

    Not Available

    1982-01-01

    The goal of the BET program is to conduct an integrated R and D program for feedstock production and conversion of organic materials to economically produce energy products that will significantly contribute to meeting long-term US energy needs. In feedstock production, laboratory investigations are being performed to reduce the risks associated with the production of microalgal oils that can be used for energy applications and high-value chemical substitutes. Research also is being done on the biochemical mechanisms that control hydrocarbon production by macroalgal species. There has been significant progress in the DOE Short-Rotation Woods Crops Program aimed at increasing yields of biomass through both improved traditional/conventional silvicultural techniques and short-rotation intensive culture. Studies that evaluate the potential of milkweed as an energy feedstock were completed in FY 1982. In thermochemical conversion, evaluations of a variety of high-performance gasification systems for producing medium-Btu gas and synthesis gas were concluded in FY 1982. Free market forces are expected to stimulate private sector interest in developing the technology and marketing needed to commercialize medium-Btu gasification systems. Medium-Btu gases have numerous beneficial industrial applications, and this technology is close to entry into the marketplace. Progress has been made in FY 1982 toward understanding the basic mechanisms and kinetics affecting the thermochemical processing of biomass through fast pyrolysis and direct liquefaction techniques. In biochemical conversion, fundamental research is being performed on the anaerobic digestion process. FY 1982 research activities also included laboratory-scale experiments on photobiological methods for hydrogen production. Separate abstracts have been prepared for each of the 3 program areas for inclusion in the Energy Data Base. (DMC)

  17. Improving material and energy recovery from the sewage sludge and biomass residues

    SciTech Connect

    Kliopova, Irina Makarskienė, Kristina

    2015-02-15

    Highlights: • SRF production from 10–40 mm fraction of pre-composted sludge and biomass residues. • The material and energy balance of compost and SRF production. • Characteristics of raw materials and classification of produced SRF. • Results of the efficiency of energy recovery, comparison analysis with – sawdust. - Abstract: Sewage sludge management is a big problem all over the world because of its large quantities and harmful impact on the environment. Energy conversion through fermentation, compost production from treated sludge for agriculture, especially for growing energetic plants, and treated sludge use for soil remediation are widely used alternatives of sewage sludge management. Recently, in many EU countries the popularity of these methods has decreased due to the sewage sludge content (heavy metals, organic pollutions and other hazards materials). This paper presents research results where the possibility of solid recovered fuel (SRF) production from the separate fraction (10–40 mm) of pre-composted materials – sewage sludge from municipal waste water treatment plant and biomass residues has been evaluated. The remaining fractions of pre-composted materials can be successfully used for compost or fertiliser production, as the concentration of heavy metals in the analysed composition is reduced in comparison with sewage sludge. During the experiment presented in this paper the volume of analysed biodegradable waste was reduced by 96%: about 20% of input biodegradable waste was recovered to SRF in the form of pellets with 14.25 MJ kg{sup −1} of the net calorific value, about 23% were composted, the rest – evaporated and discharged in a wastewater. The methods of material-energy balances and comparison analysis of experiment data have been chosen for the environmental impact assessment of this biodegradable waste management alternative. Results of the efficiency of energy recovery from sewage sludge by SRF production and burning

  18. Metabolic engineering of biomass for high energy density: oilseed-like triacylglycerol yields from plant leaves.

    PubMed

    Vanhercke, Thomas; El Tahchy, Anna; Liu, Qing; Zhou, Xue-Rong; Shrestha, Pushkar; Divi, Uday K; Ral, Jean-Philippe; Mansour, Maged P; Nichols, Peter D; James, Christopher N; Horn, Patrick J; Chapman, Kent D; Beaudoin, Frederic; Ruiz-López, Noemi; Larkin, Philip J; de Feyter, Robert C; Singh, Surinder P; Petrie, James R

    2014-02-01

    High biomass crops have recently attracted significant attention as an alternative platform for the renewable production of high energy storage lipids such as triacylglycerol (TAG). While TAG typically accumulates in seeds as storage compounds fuelling subsequent germination, levels in vegetative tissues are generally low. Here, we report the accumulation of more than 15% TAG (17.7% total lipids) by dry weight in Nicotiana tabacum (tobacco) leaves by the co-expression of three genes involved in different aspects of TAG production without severely impacting plant development. These yields far exceed the levels found in wild-type leaf tissue as well as previously reported engineered TAG yields in vegetative tissues of Arabidopsis thaliana and N. tabacum. When translated to a high biomass crop, the current levels would translate to an oil yield per hectare that exceeds those of most cultivated oilseed crops. Confocal fluorescence microscopy and mass spectrometry imaging confirmed the accumulation of TAG within leaf mesophyll cells. In addition, we explored the applicability of several existing oil-processing methods using fresh leaf tissue. Our results demonstrate the technical feasibility of a vegetative plant oil production platform and provide for a step change in the bioenergy landscape, opening new prospects for sustainable food, high energy forage, biofuel and biomaterial applications. PMID:24151938

  19. Metabolic engineering of biomass for high energy density: oilseed-like triacylglycerol yields from plant leaves

    PubMed Central

    Vanhercke, Thomas; El Tahchy, Anna; Liu, Qing; Zhou, Xue-Rong; Shrestha, Pushkar; Divi, Uday K; Ral, Jean-Philippe; Mansour, Maged P; Nichols, Peter D; James, Christopher N; Horn, Patrick J; Chapman, Kent D; Beaudoin, Frederic; Ruiz-López, Noemi; Larkin, Philip J; de Feyter, Robert C; Singh, Surinder P; Petrie, James R

    2014-01-01

    High biomass crops have recently attracted significant attention as an alternative platform for the renewable production of high energy storage lipids such as triacylglycerol (TAG). While TAG typically accumulates in seeds as storage compounds fuelling subsequent germination, levels in vegetative tissues are generally low. Here, we report the accumulation of more than 15% TAG (17.7% total lipids) by dry weight in Nicotiana tabacum (tobacco) leaves by the co-expression of three genes involved in different aspects of TAG production without severely impacting plant development. These yields far exceed the levels found in wild-type leaf tissue as well as previously reported engineered TAG yields in vegetative tissues of Arabidopsis thaliana and N. tabacum. When translated to a high biomass crop, the current levels would translate to an oil yield per hectare that exceeds those of most cultivated oilseed crops. Confocal fluorescence microscopy and mass spectrometry imaging confirmed the accumulation of TAG within leaf mesophyll cells. In addition, we explored the applicability of several existing oil-processing methods using fresh leaf tissue. Our results demonstrate the technical feasibility of a vegetative plant oil production platform and provide for a step change in the bioenergy landscape, opening new prospects for sustainable food, high energy forage, biofuel and biomaterial applications. PMID:24151938

  20. A Low-cost, High-yield Process for the Direct Productin of High Energy Density Liquid Fuel from Biomass

    SciTech Connect

    Agrawal, Rakesh

    2014-02-21

    The primary objective and outcome of this project was the development and validation of a novel, low-cost, high-pressure fast-hydropyrolysis/hydrodeoxygenation (HDO) process (H{sub 2}Bioil) using supplementary hydrogen (H{sub 2}) to produce liquid hydrocarbons from biomass. The research efforts under the various tasks of the project have culminated in the first experimental demonstration of the H2Bioil process, producing 100% deoxygenated >C4+ hydrocarbons containing 36-40% of the carbon in the feed of pyrolysis products from biomass. The demonstrated H{sub 2}Bioil process technology (i.e. reactor, catalyst, and downstream product recovery) is scalable to a commercial level and is estimated to be economically competitive for the cases when supplementary H{sub 2} is sourced from coal, natural gas, or nuclear. Additionally, energy systems modeling has revealed several process integration options based on the H{sub 2}Bioil process for energy and carbon efficient liquid fuel production. All project tasks and milestones were completed or exceeded. Novel, commercially-scalable, high-pressure reactors for both fast-hydropyrolysis and hydrodeoxygenation were constructed, completing Task A. These reactors were capable of operation under a wide-range of conditions; enabling process studies that lead to identification of optimum process conditions. Model compounds representing biomass pyrolysis products were studied, completing Task B. These studies were critical in identifying and developing HDO catalysts to target specific oxygen functional groups. These process and model compound catalyst studies enabled identification of catalysts that achieved 100% deoxygenation of the real biomass feedstock, sorghum, to form hydrocarbons in high yields as part of Task C. The work completed during this grant has identified and validated the novel and commercially scalable H2Bioil process for production of hydrocarbon fuels from biomass. Studies on model compounds as well as real biomass

  1. Preliminary review of biomass energy options in Costa Rica and the national alcohol fuel program. Summary report

    SciTech Connect

    Jones, J.L.

    1981-01-30

    For an agricultural, oil-importing country such as Costa Rica, the use of biomass as a source of transportation fuels is a topic of great interest. This analysis is intended to assist the Costa Rican government and USAID/CR to identify possible biomass energy projects. While emphasis is on technologies for converting biomass into liquid fuels, agronomic issues and alternative energy options are also explored. Costa Rica plans to build six facilities for converting biomass (primarily sugarcane, supplemented by molasses, cassava, and banana wastes) to hydrous ethanol. The following issues relating to biomass conversion technologies are identified: use of hydroelectrically powered drives in sugarcane processing to allow use of bagasse as a fuel; possible sources and costs of energy for converting starch crops like cassava to ethanol; the optimal method for treating stillage; and the feasibility of using fermentation reactors. No definitive recommendation on the scale of ethanol production is made due to the lack of an environmental impact assessment. Finally, with regard to nonalcohol renewable energy, several ideas warrant consideration: electrically powered mass transit; electric cars; vehicle-mounted gasifiers operating on wood chips or pelletized fuels produced from excess bagasse; anaerobic digestion of animal manure and other agricultural wastes; and energy recovery from municipal solid wastes.

  2. Development of High Yield Feedstocks and Biomass Conversion Technology for Renewable Energy

    SciTech Connect

    Hashimoto, Andrew G.; Crow, Susan; DeBeryshe, Barbara; Ha, Richard; Jakeway, Lee; Khanal, Samir; Nakahata, Mae; Ogoshi, Richard; Shimizu, Erik; Stern, Ivette; Turano, Brian; Turn, Scott; Yanagida, John

    2015-04-09

    This project had two main goals. The first goal was to evaluate several high yielding tropical perennial grasses as feedstock for biofuel production, and to characterize the feedstock for compatible biofuel production systems. The second goal was to assess the integration of renewable energy systems for Hawaii. The project focused on high-yield grasses (napiergrass, energycane, sweet sorghum, and sugarcane). Field plots were established to evaluate the effects of elevation (30, 300 and 900 meters above sea level) and irrigation (50%, 75% and 100% of sugarcane plantation practice) on energy crop yields and input. The test plots were extensive monitored including: hydrologic studies to measure crop water use and losses through seepage and evapotranspiration; changes in soil carbon stock; greenhouse gas flux (CO2, CH4, and N2O) from the soil surface; and root morphology, biomass, and turnover. Results showed significant effects of environment on crop yields. In general, crop yields decrease as the elevation increased, being more pronounced for sweet sorghum and energycane than napiergrass. Also energy crop yields were higher with increased irrigation levels, being most pronounced with energycane and less so with sweet sorghum. Daylight length greatly affected sweet sorghum growth and yields. One of the energy crops (napiergrass) was harvested at different ages (2, 4, 6, and 8 months) to assess the changes in feedstock characteristics with age and potential to generate co-products. Although there was greater potential for co-products from younger feedstock, the increased production was not sufficient to offset the additional cost of harvesting multiple times per year. The feedstocks were also characterized to assess their compatibility with biochemical and thermochemical conversion processes. The project objectives are being continued through additional support from the Office of Naval Research, and the Biomass Research and Development

  3. Leveling Intermittent Renewable Energy Production Through Biomass Gasification-Based Hybrid Systems

    SciTech Connect

    Dean, J.; Braun, R.; Penev, M.; Kinchin, C.; Munoz, D.

    2010-01-01

    The increased use of intermittent renewable power in the United States is forcing utilities to manage increasingly complex supply and demand interactions. This paper evaluates biomass pathways for hydrogen production and how they can be integrated with renewable resources to improve the efficiency, reliability, dispatchability, and cost of other renewable technologies. Two hybrid concepts were analyzed that involve co-production of gaseous hydrogen and electric power from thermochemical biorefineries. Both of the concepts analyzed share the basic idea of combining intermittent wind-generated electricity with a biomass gasification plant. The systems were studied in detail for process feasibility and economic performance. The best performing system was estimated to produce hydrogen at a cost of $1.67/kg. The proposed hybrid systems seek to either fill energy shortfalls by supplying hydrogen to a peaking natural gas turbine or to absorb excess renewable power during low-demand hours. Direct leveling of intermittent renewable electricity production is accomplished with either an indirectly heated biomass gasifier, or a directly heated biomass gasifier. The indirect gasification concepts studied were found to be cost competitive in cases where value is placed on controlling carbon emissions. A carbon tax in the range of $26-40 per metric ton of CO{sub 2} equivalent (CO{sub 2}e) emission makes the systems studied cost competitive with steam methane reforming (SMR) to produce hydrogen. However, some additional value must be placed on energy peaking or sinking for these plants to be economically viable. The direct gasification concept studied replaces the air separation unit (ASU) with an electrolyzer bank and is unlikely to be cost competitive in the near future. High electrolyzer costs and wind power requirements make the hybridization difficult to justify economically without downsizing the system. Based on a direct replacement of the ASU with electrolyzers, hydrogen

  4. Gasification-based biomass

    SciTech Connect

    None, None

    2009-01-18

    The gasification-based biomass section of the Renewable Energy Technology Characterizations describes the technical and economic status of this emerging renewable energy option for electricity supply.

  5. Biomass Program Biopower Factsheet

    SciTech Connect

    2010-03-01

    Generating electricity and thermal energy from biomass has the potential to help meet national goals for renewable energy. The forest products industry has used biomass for power and heat for many decades, yet widespread use of biomass to supply electricity to the U.S. power grid and other applications is relatively recent.

  6. Trends in benthic macroinvertebrate community biomass and energy budgets in Lake Sevan, 1928-2004.

    PubMed

    Jenderedjian, Karen; Hakobyan, Susanna; Stapanian, Martin A

    2012-11-01

    Water levels of Lake Sevan (Armenia) were artificially lowered by nearly 20 m between 1949 and 1997. Lowered water levels, combined with increased eutrophication, were associated with seasonally anoxic conditions (lasting 1-4 months) near the bottom of the profundal zone each year during 1976-2004. In addition, the extents of the macrophyte zone and of certain substrate types were severely reduced following drawdown. Maximal depth of occurrence decreased by 2-44 m for at least for 50 species of benthic macroinvertebrates between 1982 and 2004 compared to 1937-1961. Species richness of benthic macroinvertebrates declined from 25 to three species at depths where seasonal anoxia occurred. Total biomass increased by a factor of 10 from the period 1928-1948 to 1976-1979 then declined by a factor of 3 to 4 between 1987 and 2004. Energy flow through detritivores was more than tripled during 1976-2004 compared to 1928-1971, a result of increased plankton primary production. In contrast, energy flow through herbivorous benthic macroinvertebrates decreased by a factor of nearly 5, due to reduced areal coverage of macrophytes. Energy flow through filter feeders did not change over the time period examined, but energy flow through the entire zoobenthos community was nearly tripled. The biomasses of Oligochaeta, Chironomidae, and total zoobenthos showed a delayed response to changes in primary production of 7-9, 2, and 2-4 years, respectively. These patterns may provide a basis to predict results of restoration efforts based on the abundance of the zoobenthos in future years as the level of the lake is restored and water quality improves. PMID:22200943

  7. Advanced biomass-to-energy conversion technologies for the pulp and paper industry

    SciTech Connect

    Raymond, D.R.; Kieffer, J.A.

    1995-11-01

    Driven by process changes that are making pulp and paper mills ever increasingly dependent on purchases electric power, the industry is motivated to search for technology alternatives for the conversion of its biomass residuals to electricity and other useful energy products. Recent emphasis by the U.S. Department of Energy in the area of renewables has provided an unusual window of opportunity for advancing to commercial viability these new, more efficient, energy-generation technologies. This window of opportunity comes at a time when greater than 50% of the industry`s power generation equipment will need major alteration or replacement in the next 15 years. Two technologies that can have a profound impact on the industry`s energy self sufficiency-even to substantially increasing the capability of exporting electric power-have evolved to the point of commercial readiness. These technologies are biomass gasification combined cycle (BGCC) and black liquor gasification combined cycle (BLGCC). This paper will concentrate on the results of a detailed feasibility study of the integration of BGCC technology with an operating pulp mill and how this technology when combined with emerging BLGCC can and likely will significantly change the future power house configuration of many pulp and paper production facilities. Economic information presented here includes sensitivities to capital support, export power price, feedstock price, plant capacity factor and the plant heat rate. Additional information is contained in the project report presented to NREL and EPRI. Based on analysis of these sensitivities, the factors having by far the most significant impact on BGCC economics are capital cost, the value of export power and fuel cost. Given a 50% shared cost for the first commercial plant, a positive economic result is achievable at export power prices of 5{cents}/kWh and above.

  8. Trends in Benthic macroinvertebrate community Biomass and Energy Budgets in Lake Sevan, 1928-2004

    USGS Publications Warehouse

    Stapanian, Martin A.; Jenderedjian, K.; Hakobyan, S.

    2012-01-01

    Water levels of Lake Sevan (Armenia) were artificially lowered by nearly 20 m between 1949 and 1997. Lowered water levels, combined with increased eutrophication, were associated with seasonally anoxic conditions (lasting 1–4 months) near the bottom of the profundal zone each year during 1976–2004. In addition, the extents of the macrophyte zone and of certain substrate types were severely reduced following drawdown. Maximal depth of occurrence decreased by 2–44 m for at least for 50 species of benthic macroinvertebrates between 1982 and 2004 compared to 1937–1961. Species richness of benthic macroinvertebrates declined from 25 to three species at depths where seasonal anoxia occurred. Total biomass increased by a factor of 10 from the period 1928–1948 to 1976–1979 then declined by a factor of 3 to 4 between 1987 and 2004. Energy flow through detritivores was more than tripled during 1976–2004 compared to 1928–1971, a result of increased plankton primary production. In contrast, energy flow through herbivorous benthic macroinvertebrates decreased by a factor of nearly 5, due to reduced areal coverage of macrophytes. Energy flow through filter feeders did not change over the time period examined, but energy flow through the entire zoobenthos community was nearly tripled. The biomasses of Oligochaeta, Chironomidae, and total zoobenthos showed a delayed response to changes in primary production of 7–9, 2, and 2–4 years, respectively. These patterns may provide a basis to predict results of restoration efforts based on the abundance of the zoobenthos in future years as the level of the lake is restored and water quality improves.

  9. Biomass for Electricity Generation

    EIA Publications

    2002-01-01

    This paper examines issues affecting the uses of biomass for electricity generation. The methodology used in the National Energy Modeling System to account for various types of biomass is discussed, and the underlying assumptions are explained.

  10. Renewable energy from biomass: a sustainable option? - Hydrogen production from alcohols

    NASA Astrophysics Data System (ADS)

    Balla, Zoltán; Kith, Károly; Tamás, András; Nagy, Orsolya

    2015-04-01

    Sustainable development requires us to find new energy sources instead of fossil fuels. One possibility is the hydrogen fuel cell, which uses significantly more efficient than the current combustion engines. The task of the hydrogen is clean, carbon-free renewable energy sources to choose in the future by growing degree. Hungary can play a role in the renewable energy sources of biomass as a renewable biomass annually mass of about 350 to 360 million tons. The biomass is only a very small proportion of fossil turn carbonaceous materials substitution, while we may utilize alternative energy sources as well. To the hydrogen production from biomass, the first step of the chemical transformations of chemical bonds are broken, which is always activation energy investment needs. The methanol and ethanol by fermentation from different agricultural products is relatively easy to produce, so these can be regarded as renewable energy carriers of. The ethanol can be used directly, and used in several places in the world are mixed with the petrol additive. This method is the disadvantage that the anhydrous alcohol is to be used in the combustion process in the engine more undesired by-products may be formed, and the fuel efficiency of the engine is significantly lower than the efficiency of the fuel cells. More useful to produce hydrogen from the alcohol and is used in a fuel cell electric power generation. Particularly attractive option for the so-called on-board reforming of alcohols, that happens immediately when the vehicle hydrogen production. It does not need a large tank of hydrogen, because the hydrogen produced would be directly to the fuel cell. The H2 tank limit use of its high cost, the significant loss evaporation, the rare-station network, production capacity and service background and lack of opportunity to refuel problems. These can be overcome, if the hydrogen in the vehicle is prepared. As volume even 700 bar only about half the H2 pressure gas can be stored

  11. Probing Energy and Electron Transfer Mechanisms in Fluorescence Quenching of Biomass Carbon Quantum Dots.

    PubMed

    Liang, Zicheng; Kang, Mijeong; Payne, Gregory F; Wang, Xiaohui; Sun, Runcang

    2016-07-13

    The recent discovery of biomass-derived carbon quantum dots (CQDs) offers the potential to extend the sensing and imaging capabilities of quantum dots (QDs) to applications that require biocompatibility and environmental friendliness. Many studies have confirmed the exciting optical properties of CQDs and suggested a range of applications, but realizing the potential of CQDs will require a deeper fundamental understanding of their photophysical behavior. Here, biomass-derived CQDs were synthesized by hydrothermal processing methods from the aminopolysaccharide chitosan, and their fluorescence quenching behaviors were investigated. A family of nitroaromatics with different ring substituents was used to generate systematically varying CQD-quenching behaviors. Experimental evidence including a correlation between quenching constant and spectral overlap, fluorescence lifetime decay, and donor-acceptor distance all demonstrate that the primary mechanism for QCD-quenching is Förster resonance energy transfer (FRET) and not electron transfer. Spectroelectrochemical studies with redox-dependent quenching molecules and studies with complex dye molecules further support this conclusion. We envision this fundamental understanding of CQDs will facilitate the application of these emerging nanomaterials for sensing and imaging. PMID:27314592

  12. An integrated approach to energy recovery from biomass and waste: Anaerobic digestion-gasification-water treatment.

    PubMed

    Milani, M; Montorsi, L; Stefani, M

    2014-07-01

    The article investigates the performance of an integrated system for the energy recovery from biomass and waste based on anaerobic digestion, gasification and water treatment. In the proposed system, the organic fraction of waste of the digestible biomass is fed into an anaerobic digester, while a part of the combustible fraction of the municipal solid waste is gasified. Thus, the obtained biogas and syngas are used as a fuel for running a cogeneration system based on an internal combustion engine to produce electric and thermal power. The waste water produced by the integrated plant is recovered by means of both forward and inverse osmosis. The different processes, as well as the main components of the system, are modelled by means of a lumped and distributed parameter approach and the main outputs of the integrated plant such as the electric and thermal power and the amount of purified water are calculated. Finally, the implementation of the proposed system is evaluated for urban areas with a different number of inhabitants and the relating performance is estimated in terms of the main outputs of the system. PMID:24946772

  13. Energy requirements for wet solvent extraction of lipids from microalgal biomass.

    PubMed

    Martin, Gregory J O

    2016-04-01

    Biofuel production from microalgae requires energy efficient processes for extracting and converting triacylglyceride lipids to fuel, compatible with coproduction of protein feeds and nutraceuticals. Wet solvent extraction involves mechanical cell rupture, lipid extraction via solvent contacting, physical phase separation, thermal solvent recovery, and transesterification. A detailed analysis of the effect of key process parameters on the parasitic energy demand of this process was performed. On a well-to-pump basis, between 16% and 320% of the resultant biodiesel energy was consumed depending solely on the process parameters. Highly positive energy balances can be achieved, but only if a correctly designed process is used. This requires processing concentrated biomass (ca 25%w/w) with a high triacylglyceride content (ca 30%w/w), and an efficient extraction process employing a non-polar solvent, low solvent-to-paste ratio, and efficient energy recovery. These requirements preclude many laboratory scale processes and polar co-solvents as viable options for large-scale biofuel production. PMID:26802186

  14. Metabolic engineering of sugarcane to accumulate energy-dense triacylglycerols in vegetative biomass.

    PubMed

    Zale, Janice; Jung, Je Hyeong; Kim, Jae Yoon; Pathak, Bhuvan; Karan, Ratna; Liu, Hui; Chen, Xiuhua; Wu, Hao; Candreva, Jason; Zhai, Zhiyang; Shanklin, John; Altpeter, Fredy

    2016-02-01

    Elevating the lipid content in vegetative tissues has emerged as a new strategy for increasing energy density and biofuel yield of crops. Storage lipids in contrast to structural and signaling lipids are mainly composed of glycerol esters of fatty acids, also known as triacylglycerol (TAG). TAGs are one of the most energy-rich and abundant forms of reduced carbon available in nature. Therefore, altering the carbon-partitioning balance in favour of TAG in vegetative tissues of sugarcane, one of the highest yielding biomass crops, is expected to drastically increase energy yields. Here we report metabolic engineering to elevate TAG accumulation in vegetative tissues of sugarcane. Constitutive co-expression of WRINKLED1 (WRI1), diacylglycerol acyltransferase1-2 (DGAT1-2) and oleosin1 (OLE1) and simultaneous cosuppression of ADP-glucose pyrophosphorylase (AGPase) and a subunit of the peroxisomal ABC transporter1 (PXA1) in transgenic sugarcane elevated TAG accumulation in leaves or stems by 95- or 43-fold to 1.9% or 0.9% of dry weight (DW), respectively, while expression or suppression of one to three of the target genes increased TAG levels by 1.5- to 9.5-fold. Accumulation of TAG in vegetative progeny plants was consistent with the results from primary transgenics and contributed to a total fatty acid content of up to 4.7% or 1.7% of DW in mature leaves or stems, respectively. Lipid droplets were visible within mesophyll cells of transgenic leaves by confocal fluorescence microscopy. These results provide the basis for optimizations of TAG accumulation in sugarcane and other high yielding biomass grasses and will open new prospects for biofuel applications. PMID:26058948

  15. Biomass Support for the China Renewable Energy Law: Final Report, December 2005

    SciTech Connect

    Not Available

    2006-10-01

    Final subcontractor report giving an overview of the biomass power generation technologies used in China. Report covers resources, technologies, foreign technologies and resources for comparison purposes, biomass potential in China, and finally government policies in China that support/hinder development of the using biomass in China for power generation.

  16. Densified biomass can cost-effectively mitigate greenhouse gas emissions and address energy security in thermal applications.

    PubMed

    Wilson, Thomas O; McNeal, Frederick M; Spatari, Sabrina; G Abler, David; Adler, Paul R

    2012-01-17

    Regional supplies of biomass are currently being evaluated as feedstocks in energy applications to meet renewable portfolio (RPS) and low carbon fuel standards. We investigate the life cycle greenhouse gas (GHG) emissions and associated abatement costs resulting from using densified switchgrass for thermal and electrical energy. In contrast to the large and positive abatement costs for using biomass in electricity generation ($149/Mg CO(2)e) due to the low cost of coal and high feedstock and power plant operation costs, abatement costs for replacing fuel oil with biomass in thermal applications are large and negative (-$52 to -$92/Mg CO(2)e), resulting in cost savings. Replacing fuel oil with biomass in thermal applications results in least cost reductions compared to replacing coal in electricity generation, an alternative that has gained attention due to RPS legislation and the centralized production model most often considered in U.S. policy. Our estimates indicate a more than doubling of liquid fuel displacement when switchgrass is substituted for fuel oil as opposed to gasoline, suggesting that, in certain U.S. locations, such as the northeast, densified biomass would help to significantly decarbonize energy supply with regionally sourced feedstock, while also reducing imported oil. On the basis of supply projections from the recently released Billion Ton Report, there will be enough sustainably harvested biomass available in the northeast by 2022 to offset the entirety of heating oil demand in the same region. This will save NE consumers between $2.3 and $3.9 billion annually. Diverting the same resource to electricity generation would cost the region $7.7 billion per year. While there is great need for finding low carbon substitutes for coal power and liquid transportation fuels in the U.S., we argue that in certain regions it makes cost- (and GHG mitigation-) effective sense to phase out liquid heating fuels with locally produced biomass first. PMID

  17. Evaluation of thermal energy storage for the proposed Twin Cities District Heating system. [using cogeneration heat production and aquifiers for heat storage

    NASA Technical Reports Server (NTRS)

    Meyer, C. F.

    1980-01-01

    The technical and economic feasibility of incorporating thermal energy storage components into the proposed Twin Cities District heating project was evaluated. The technical status of the project is reviewed and conceptual designs of district heating systems with and without thermal energy storage were compared in terms of estimated capital requirements, fuel consumption, delivered energy cost, and environmental aspects. The thermal energy storage system is based on cogeneration and the storage of heat in aquifers.

  18. Production of Biofuel from Waste Lignocellulosic Biomass Materials Based on Energy Saving Viewpoint

    NASA Astrophysics Data System (ADS)

    Takano, Maki; Hoshino, Kazuhiro

    To develop biofuel production from waste lignocellulosic biomass materials the rice straw was selected one of renewable material and the degradation condition about pretreatment and enzymatic hydrolysis to obtain effectively fermentable sugars was investigated. Rice straw was pretreated by five kinds of methods and then the components ratio of rice straw was examined. First, the steam explosion was selected based on the degradability and the requirement energy. In addition, the best suitable combination of two cellulases to effective and economical hydrolyze was determined from the degradability of these pretreated rice straws. In the simultaneous saccharification and fermentation of the steam explosion rice straw by combining cellulase cocktail and a novel fermenting fungus, 13.2 g/L ethanol was able to product for 96 h.

  19. In Vivo Packaging of Triacylglycerols Enhances Arabidopsis Leaf Biomass and Energy Density1[W][OA

    PubMed Central

    Winichayakul, Somrutai; Scott, Richard William; Roldan, Marissa; Hatier, Jean-Hugues Bertrand; Livingston, Sam; Cookson, Ruth; Curran, Amy Christina; Roberts, Nicholas John

    2013-01-01

    Our dependency on reduced carbon for energy has led to a rapid increase in the search for sustainable alternatives and a call to focus on energy densification and increasing biomass yields. In this study, we generated a uniquely stabilized plant structural protein (cysteine [Cys]-oleosin) that encapsulates triacylglycerol (TAG). When coexpressed with diacylglycerol O-acyltransferase (DGAT1) in Arabidopsis (Arabidopsis thaliana), we observed a 24% increase in the carbon dioxide (CO2) assimilation rate per unit of leaf area and a 50% increase in leaf biomass as well as approximately 2-, 3-, and 5-fold increases in the fatty acid content of the mature leaves, senescing leaves, and roots, respectively. We propose that the coexpression led to the formation of enduring lipid droplets that prevented the futile cycle of TAG biosynthesis/lipolysis and instead created a sustained demand for de novo lipid biosynthesis, which in turn elevated CO2 recycling in the chloroplast. Fatty acid profile analysis indicated that the formation of TAG involved acyl cycling in Arabidopsis leaves and roots. We also demonstrate that the combination of Cys-oleosin and DGAT1 resulted in the highest accumulation of fatty acids in the model single-cell eukaryote, Saccharomyces cerevisiae. Our results support the notion that the prevention of lipolysis is vital to enabling TAG accumulation in vegetative tissues and confirm the earlier speculation that elevating fatty acid biosynthesis in the leaf would lead to an increase in CO2 assimilation. The Cys-oleosins have applications in biofuels, animal feed, and human nutrition as well as in providing a tool for investigating fatty acid biosynthesis and catabolism. PMID:23616604

  20. In vivo packaging of triacylglycerols enhances Arabidopsis leaf biomass and energy density.

    PubMed

    Winichayakul, Somrutai; Scott, Richard William; Roldan, Marissa; Hatier, Jean-Hugues Bertrand; Livingston, Sam; Cookson, Ruth; Curran, Amy Christina; Roberts, Nicholas John

    2013-06-01

    Our dependency on reduced carbon for energy has led to a rapid increase in the search for sustainable alternatives and a call to focus on energy densification and increasing biomass yields. In this study, we generated a uniquely stabilized plant structural protein (cysteine [Cys]-oleosin) that encapsulates triacylglycerol (TAG). When coexpressed with diacylglycerol O-acyltransferase (DGAT1) in Arabidopsis (Arabidopsis thaliana), we observed a 24% increase in the carbon dioxide (CO2) assimilation rate per unit of leaf area and a 50% increase in leaf biomass as well as approximately 2-, 3-, and 5-fold increases in the fatty acid content of the mature leaves, senescing leaves, and roots, respectively. We propose that the coexpression led to the formation of enduring lipid droplets that prevented the futile cycle of TAG biosynthesis/lipolysis and instead created a sustained demand for de novo lipid biosynthesis, which in turn elevated CO2 recycling in the chloroplast. Fatty acid profile analysis indicated that the formation of TAG involved acyl cycling in Arabidopsis leaves and roots. We also demonstrate that the combination of Cys-oleosin and DGAT1 resulted in the highest accumulation of fatty acids in the model single-cell eukaryote, Saccharomyces cerevisiae. Our results support the notion that the prevention of lipolysis is vital to enabling TAG accumulation in vegetative tissues and confirm the earlier speculation that elevating fatty acid biosynthesis in the leaf would lead to an increase in CO2 assimilation. The Cys-oleosins have applications in biofuels, animal feed, and human nutrition as well as in providing a tool for investigating fatty acid biosynthesis and catabolism. PMID:23616604

  1. Energy Conservation: Guidelines for Action. Suggested Guidelines for Local School District Development of Energy Conservation Programs.

    ERIC Educational Resources Information Center

    Michigan Association of School Administrators, East Lansing.

    Curriculum guidelines for the local development of energy conservation programs in public schools reflect an interdisciplinary educational approach--the result of a coordinated effort by industry, commerce, education, and government agencies concerned with the energy crisis. The scope and nature of the problem, with its implications for education…

  2. Semantic Bim and GIS Modelling for Energy-Efficient Buildings Integrated in a Healthcare District

    NASA Astrophysics Data System (ADS)

    Sebastian, R.; Böhms, H. M.; Bonsma, P.; van den Helm, P. W.

    2013-09-01

    The subject of energy-efficient buildings (EeB) is among the most urgent research priorities in the European Union (EU). In order to achieve the broadest impact, innovative approaches to EeB need to resolve challenges at the neighbourhood level, instead of only focusing on improvements of individual buildings. For this purpose, the design phase of new building projects as well as building retrofitting projects is the crucial moment for integrating multi-scale EeB solutions. In EeB design process, clients, architects, technical designers, contractors, and end-users altogether need new methods and tools for designing energy-efficiency buildings integrated in their neighbourhoods. Since the scope of designing covers multiple dimensions, the new design methodology relies on the inter-operability between Building Information Modelling (BIM) and Geospatial Information Systems (GIS). Design for EeB optimisation needs to put attention on the inter-connections between the architectural systems and the MEP/HVAC systems, as well as on the relation of Product Lifecycle Modelling (PLM), Building Management Systems (BMS), BIM and GIS. This paper is descriptive and it presents an actual EU FP7 large-scale collaborative research project titled STREAMER. The research on the inter-operability between BIM and GIS for holistic design of energy-efficient buildings in neighbourhood scale is supported by real case studies of mixed-use healthcare districts. The new design methodology encompasses all scales and all lifecycle phases of the built environment, as well as the whole lifecycle of the information models that comprises: Building Information Model (BIM), Building Assembly Model (BAM), Building Energy Model (BEM), and Building Operation Optimisation Model (BOOM).

  3. Snohomish County Public Utility District Geothermal Energy Exploration Study Final Technical Report

    SciTech Connect

    Lewis, Adam; Collar, Craig W.

    2012-10-04

    Supported by funds from this award, the District thoroughly explored the feasibility of a hydrothermal geothermal development within its service territory. The District successfully planned and drilled six exploratory geothermal wells and added significantly to the knowledge of the geology of the area. The Straight Creek Fault region, which was the sole location that showed significant potential for hydrothermal development in the District's service territory, was determined not to be feasible for development. The District subsequently expanded its search for geothermal development locations to include all of Washington State. Mount Baker has been identified as the area of the state with the greatest potential for geothermal development. Having gathered additional information about the Mount Baker region with support from this award, the District is actively pursuing exploration and development in the area.

  4. Estimating Biomass Productivity Using SPOT Vgt Data for Crop & Livestock Prioritisation in Semi-Arid Zone of Zimbabwe: a Case Study of Nkayi District

    NASA Astrophysics Data System (ADS)

    Pandey, Suraj; Vanrooyen, Andre F.; Chiwara, Phibion; Chirima, Albert

    Agriculture forms the backbone of Zimbabwe's economy being the major income earner and source of employment. Over 70% of the country's population lives in communal areas where livelihoods primarily depend on agriculture and related activities. Livestock is crucial in the drier parts of the country where crop production is restricted by droughts and inherent soil in-fertility. Livestock contribute 15-20% of all agricultural produce excluding other socioeconomic benefits derived at household level. This study employed GIS and Remote sensing techniques to assess forage and livestock trends in Nkayi district based on the major land use/land cover types. First simple NDVI indicators were used as measures of forage productivity and; second, NPP was computed from SPOT VGT NDVI product. NPP was integrated with livestock data to establish the Grazing Pressure Index (GPI). 10-year average NPP for Nkayi ranges from 2,8Tons DM/ha/year -10.5TonsDM/ha/year. Lowest values were consistent in degraded and cultivation areas with the Vungu and Shangani river margins. About 61,1% of the district experienced a net decrease in NPP while 38,9% experienced a net positive change in NPP. The trend in NPP values was consistent with that of NDVI indicators. The GPI shows ranges from 1TLU/kg to 4.8TLU/kg. 9% of the total district area is between 0-1TLU/kg which is the recommended threshold while 19.7% shows significant evidence of overgrazing. The amount of forage available at the moment compared to current stocking rates is inadequate therefore it is strongly recommended that responsible authorities embark on activities to either improve forage or reduce current livestock numbers so that farmers can realise maximum benefits from livestock production systems in the district.

  5. Utilisation of biomass gasification by-products for onsite energy production.

    PubMed

    Vakalis, S; Sotiropoulos, A; Moustakas, K; Malamis, D; Baratieri, M

    2016-06-01

    Small scale biomass gasification is a sector with growth and increasing applications owing to the environmental goals of the European Union and the incentivised policies of most European countries. This study addresses two aspects, which are at the centre of attention concerning the operation and development of small scale gasifiers; reuse of waste and increase of energy efficiency. Several authors have denoted that the low electrical efficiency of these systems is the main barrier for further commercial development. In addition, gasification has several by-products that have no further use and are discarded as waste. In the framework of this manuscript, a secondary reactor is introduced and modelled. The main operating principle is the utilisation of char and flue gases for further energy production. These by-products are reformed into secondary producer gas by means of a secondary reactor. In addition, a set of heat exchangers capture the waste heat and optimise the process. This case study is modelled in a MATLAB-Cantera environment. The model is non-stoichiometric and applies the Gibbs minimisation principle. The simulations show that some of the thermal energy is depleted during the process owing to the preheating of flue gases. Nonetheless, the addition of a secondary reactor results in an increase of the electrical power production efficiency and the combined heat and power (CHP) efficiency. PMID:27118736

  6. BIOMASS DRYING TECHNOLOGIES

    EPA Science Inventory

    The report examines the technologies used for drying of biomass and the energy requirements of biomass dryers. Biomass drying processes, drying methods, and the conventional types of dryers are surveyed generally. Drying methods and dryer studies using superheated steam as the d...

  7. Technology assessment of solar energy systems: availability and impacts of woody biomass utilization in the Pacific Northwest

    SciTech Connect

    Hopp, W.J.; Chockie, A.D.; Allwine, K.J.

    1981-09-01

    The estimates of the biomass resource base in the Northwest are reviewed for comparison with scenarios used and a preliminary analysis of the issues involved in the collection and use of forest residues as an energy resource is presented. Four issues are reviewed that may serve to constrain the total amount of wood residues available for use as fuel. (MHR)

  8. Tapping the Molecular Potential of Microalgae to Produce Biomass (JGI Seventh Annual User Meeting 2012: Genomics of Energy and Environment)

    ScienceCinema

    Sayre, Richard [LANL

    2013-01-22

    Richard Sayre, from Los Alamos National Laboratory, presents a talk titled "Tapping the Molecular Potential of Microalgae to Produce Biomass" at the JGI 7th Annual Users Meeting: Genomics of Energy & Environment Meeting on March 22, 2012 in Walnut Creek, California.

  9. Tapping the Molecular Potential of Microalgae to Produce Biomass (JGI Seventh Annual User Meeting 2012: Genomics of Energy and Environment)

    SciTech Connect

    Sayre, Richard

    2012-03-22

    Richard Sayre, from Los Alamos National Laboratory, presents a talk titled "Tapping the Molecular Potential of Microalgae to Produce Biomass" at the JGI 7th Annual Users Meeting: Genomics of Energy & Environment Meeting on March 22, 2012 in Walnut Creek, California.

  10. Background report for the formerly utilized Manhattan Engineer District/Atomic Energy Commission sites program

    SciTech Connect

    1980-09-01

    The Department of Energy is conducting a program to determine radiological conditions at sites formerly used by the Army Corps of Engineers' Manhattan Engineer District and the Atomic Energy Commission in the early years of nuclear energy development. Also included in the program are sites used in the Los Alamos plutonium development program and the Trinity atomic bomb test site. Materials, equipment, buildings, and land became contaminated, primarily with naturally occurring radioactive nuclides. They were later decontaminated in accordance with the standards and survey methods in use at that time. Since then, however, radiological criteria, and proposed guidelines for release of such sites for unrestricted use have become more stringent as research on the effects of low-level radiation has progressed. In addition, records documenting some of these decontamination efforts cannot be found, and the final radiological conditions of the sites could not be adequately determined from the records. As a result, the Formerly Utilized Sites Program was initiated in 1974 to identify these formerly used sites and to reevaluate their radiological status. This report covers efforts through June 1980 to determine the radiological status of sites for which the existing conditions could not be clearly defined. Principal contractor facilities and associated properties have already been identified and activities are continuing to identify additional sites. Any new sites located will probably be subcontractor facilities and areas used for disposal of contractor waste or equipment; however, only limited information regarding this equipment and material has been collected to date. As additional information becomes available, supplemental reports will be published.

  11. 78 FR 3892 - Turlock Irrigation District and Modesto Irrigation District; Notice Clarifying Party Status

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-17

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Turlock Irrigation District and Modesto Irrigation District; Notice Clarifying Party Status On January 9, 2013, the Modesto Irrigation District (Modesto) filed a motion...

  12. Energy conversion of biomass with supercritical and subcritical water using large-scale plants.

    PubMed

    Okajima, Idzumi; Sako, Takeshi

    2014-01-01

    Exploiting unused or waste biomass as an alternative fuel is currently receiving much attention because of the potential reductions in CO2 emissions and the lower cost in comparison to expensive fossil fuels. If we are to use biomass domestically or industrially, we must be able to convert biomass to high-quality and easy-to-use liquid, gas, or solid fuels that have high-calorific values, low moisture and ash contents, uniform composition, and suitable for stored over long periods. In biomass treatment, hot and high-pressure water including supercritical and subcritical water is an excellent solvent, as it is clean and safe and its action on biomass can be optimized by varying the temperature and pressure. In this article, the conversion of waste biomass to fuel using hot and high-pressure water is reviewed, and the following examples are presented: the production of large amounts of hydrogen from waste biomass, the production of cheap bioethanol from non-food raw materials, and the production of composite powder fuel from refractory waste biomass in the rubble from the Great East Japan Earthquake. Several promising techniques for the conversion of biomass have been demonstrated in large-scale plants and commercial deployment is expected in the near future. PMID:23867098

  13. Life-cycle energy and GHG emissions of forest biomass harvest and transport for biofuel production in Michigan

    DOE PAGESBeta

    Zhang, Fengli; Johnson, Dana M.; Wang, Jinjiang

    2015-04-01

    High dependence on imported oil has increased U.S. strategic vulnerability and prompted more research in the area of renewable energy production. Ethanol production from renewable woody biomass, which could be a substitute for gasoline, has seen increased interest. This study analysed energy use and greenhouse gas emission impacts on the forest biomass supply chain activities within the State of Michigan. A life-cycle assessment of harvesting and transportation stages was completed utilizing peer-reviewed literature. Results for forest-delivered ethanol were compared with those for petroleum gasoline using data specific to the U.S. The analysis from a woody biomass feedstock supply perspective uncoveredmore » that ethanol production is more environmentally friendly (about 62% less greenhouse gas emissions) compared with petroleum based fossil fuel production. Sensitivity analysis was conducted with key inputs associated with harvesting and transportation operations. The results showed that research focused on improving biomass recovery efficiency and truck fuel economy further reduced GHG emissions and energy consumption.« less

  14. Life-cycle energy and GHG emissions of forest biomass harvest and transport for biofuel production in Michigan

    SciTech Connect

    Zhang, Fengli; Johnson, Dana M.; Wang, Jinjiang

    2015-04-01

    High dependence on imported oil has increased U.S. strategic vulnerability and prompted more research in the area of renewable energy production. Ethanol production from renewable woody biomass, which could be a substitute for gasoline, has seen increased interest. This study analysed energy use and greenhouse gas emission impacts on the forest biomass supply chain activities within the State of Michigan. A life-cycle assessment of harvesting and transportation stages was completed utilizing peer-reviewed literature. Results for forest-delivered ethanol were compared with those for petroleum gasoline using data specific to the U.S. The analysis from a woody biomass feedstock supply perspective uncovered that ethanol production is more environmentally friendly (about 62% less greenhouse gas emissions) compared with petroleum based fossil fuel production. Sensitivity analysis was conducted with key inputs associated with harvesting and transportation operations. The results showed that research focused on improving biomass recovery efficiency and truck fuel economy further reduced GHG emissions and energy consumption.

  15. United States biomass energy: An assessment of costs and infrastructure for alternative uses of biomass energy crops as an energy feedstock

    NASA Astrophysics Data System (ADS)

    Morrow, William Russell, III

    Reduction of the negative environmental and human health externalities resulting from both the electricity and transportation sectors can be achieved through technologies such as clean coal, natural gas, nuclear, hydro, wind, and solar photovoltaic technologies for electricity; reformulated gasoline and other fossil fuels, hydrogen, and electrical options for transportation. Negative externalities can also be reduced through demand reductions and efficiency improvements in both sectors. However, most of these options come with cost increases for two primary reasons: (1) most environmental and human health consequences have historically been excluded from energy prices; (2) fossil energy markets have been optimizing costs for over 100 years and thus have achieved dramatic cost savings over time. Comparing the benefits and costs of alternatives requires understanding of the tradeoffs associated with competing technology and lifestyle choices. As bioenergy is proposed as a large-scale feedstock within the United States, a question of "best use" of bioenergy becomes important. Bioenergy advocates propose its use as an alternative energy resource for electricity generation and transportation fuel production, primarily focusing on ethanol. These advocates argue that bioenergy offers environmental and economic benefits over current fossil energy use in each of these two sectors as well as in the U.S. agriculture sector. Unfortunately, bioenergy research has offered very few comparisons of these two alternative uses. This thesis helps fill this gap. This thesis compares the economics of bioenergy utilization by a method for estimating total financial costs for each proposed bioenergy use. Locations for potential feedstocks and bio-processing facilities (co-firing switchgrass and coal in existing coal fired power plants and new ethanol refineries) are estimated and linear programs are developed to estimate large-scale transportation infrastructure costs for each sector

  16. ZERO WASTE BIODIESEL: USING GLYCERIN AND BIOMASS TO CREATE RENEWABLE ENERGY

    EPA Science Inventory

    The procedure for the creation of pellets is fairly mundane, however crucial, in order to create a standard and repeatable process. The pellets biomass material are mixed by weight ratio, and blended to a consistent particulate size. The glycerin to biomass ratio by weight is ...

  17. Energy sorghum biomass harvest thresholds and tillage effects on soil organic carbon and bulk density

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Bioenergy feedstock production systems face many challenges, among which is the lack of guidelines on sustainable biomass harvest thresholds, and tillage cropping systems that minimize the potential cumulative effects of fresh biomass harvesting equipment-induced soil compaction. We used the ALMANAC...

  18. Maximizing Production of Fiber, Fermentable Sugars, and Energy by Matching Biomass Species to Landscape Position

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The objective of this research project is to characterize a diverse group of potential biomass species (corn, alfalfa, perennial flax, switchgrass, poplar, and willow) for their yield of biomass, fiber, and fermentable sugars across a diverse set of within-field environments. Our goal is to advance ...

  19. Improving material and energy recovery from the sewage sludge and biomass residues.

    PubMed

    Kliopova, Irina; Makarskienė, Kristina

    2015-02-01

    Sewage sludge management is a big problem all over the world because of its large quantities and harmful impact on the environment. Energy conversion through fermentation, compost production from treated sludge for agriculture, especially for growing energetic plants, and treated sludge use for soil remediation are widely used alternatives of sewage sludge management. Recently, in many EU countries the popularity of these methods has decreased due to the sewage sludge content (heavy metals, organic pollutions and other hazards materials). This paper presents research results where the possibility of solid recovered fuel (SRF) production from the separate fraction (10-40 mm) of pre-composted materials--sewage sludge from municipal waste water treatment plant and biomass residues has been evaluated. The remaining fractions of pre-composted materials can be successfully used for compost or fertiliser production, as the concentration of heavy metals in the analysed composition is reduced in comparison with sewage sludge. During the experiment presented in this paper the volume of analysed biodegradable waste was reduced by 96%: about 20% of input biodegradable waste was recovered to SRF in the form of pellets with 14.25 MJ kg(-1) of the net calorific value, about 23% were composted, the rest--evaporated and discharged in a wastewater. The methods of material-energy balances and comparison analysis of experiment data have been chosen for the environmental impact assessment of this biodegradable waste management alternative. Results of the efficiency of energy recovery from sewage sludge by SRF production and burning, comparison analysis with widely used bio-fuel-sawdust and conclusions made are presented. PMID:25481696

  20. Implementation of a Biomass Energy Island for a forested Air Force installation. Final report Mar 82-Jan 83

    SciTech Connect

    Huff, W.J.; McConnell, W.V.; Steadman, P.E.

    1983-01-01

    This study examines the silvicultural practices, harvesting methodology and managerial techniques pertinent to the operation of Choctawhatchee sand pine (CSP) plantations on Eglin AFB to establish Eglin as a Biomass Energy Island (BEI). Previous studies have demonstrated: (1) the feasibility of using wood grown on selected Air Force installations as the fuel to supply the energy requirements of each; and (2) the specific adaptability of Eglin AFB as a Biomass Energy Island (BEI). As such, Eglin would satisfy all energy needs of the facility by using 540,000 green tons of wood chips harvested from 90,000 acres of on-base energy plantations to fuel a gasification/combined cycle conversion system. This study concludes: the technology of biomass conversion is appropriate for Eglin; both gasification and direct combustion cogeneration should be used for comparison purposes initially in the light of changing requirements; and the management of wood fuel plantations at Eglin and the phased establishment of the base as a BEI is both economically and technically sound and desirable.

  1. Sustainable biomass energy production and rural economic development using alfalfa as feedstock

    SciTech Connect

    DeLong, M.M.; Swanberg, D.R.; Oelke, E.A.

    1995-11-01

    Alfalfa is a well-known and widely-planted crop that offers environmental and soil conservation advantages when grown as a 4-year segment in a 7-year rotation with corn and soybeans. Alfalfa fixes nitrogen from the air, thereby enhancing soil nitrogen and decreasing the need for manufactured nitrogen fertilizer. With alfalfa yields of 4 dry tons per acre per year and with separate alfalfa leaves being sold as a high-value animal feed, separated alfalfa stems can be economically viable fuel feedstock for a gasifier combined cycle power plant. This paper reports on a feasibility study for an integrated biomass power system, where an energy crop (alfalfa) is coupled to a processing plant and a power plant (integrated gasification combined cycle with hot gas cleanup) in a way that benefits the joint venture of an alfalfa producers cooperative and a utility entity. The sale of a mid-level protein animal feed co-product and electricity both support the production cost of alfalfa. The co-product/fuel processing operation uses a common train of equipment, thereby requiring neither product to carry the total cost. The power plant provides an important continuous demand for the feedstock and results in continuous supply of leaf product to provide a reliable supply needed for the leaf meal product.

  2. Photosynthetic microbial desalination cells (PMDCs) for clean energy, water and biomass production.

    PubMed

    Kokabian, Bahareh; Gude, Veera Gnaneswar

    2013-12-01

    Current microbial desalination cell (MDC) performances are evaluated with chemical catalysts such as ferricyanide, platinum catalyzed air-cathodes or aerated cathodes. All of these methods improve power generation potential in MDCs, however, they are not preferable for large scale applications due to cost, energy and environmental toxicity issues. In this study, performance of microbial desalination cells with an air cathode and an algae biocathode (Photosynthetic MDC - PMDC) were evaluated, both under passive conditions (no mechanical aeration or mixing). The results indicate that passive algae biocathodes perform better than air cathodes and enhance COD removal and utilize treated wastewater as the growth medium to obtain valuable biomass for high value bioproducts. Maximum power densities of 84 mW m(-3) (anode volume) or 151 mW m(-3) (biocathode volume) and a desalination rate of 40% were measured with 0.9 : 1 : 0.5 volumetric ratios of anode, desalination and algae biocathode chambers respectively. This first proof-of-concept study proves that the passive mechanisms can be beneficial in enhancing the sustainability of microbial desalination cells. PMID:24154718

  3. Grassland bird response to harvesting switchgrass as a biomass energy crop

    USGS Publications Warehouse

    Roth, A.M.; Sample, D.W.; Ribic, C.A.; Paine, L.; Undersander, D.J.; Bartelt, G.A.

    2005-01-01

    The combustion of perennial grass biomass to generate electricity may be a promising renewable energy option. Switchgrass (Panicum virgatum) grown as a biofuel has the potential to provide a cash crop for farmers and quality nesting cover for grassland birds. In southwestern Wisconsin (near lat. 42??52???, long. 90??08???), we investigated the impact of an August harvest of switchgrass for bioenergy on community composition and abundance of Wisconsin grassland bird species of management concern. Harvesting the switchgrass in August resulted in changes in vegetation structure and bird species composition the following nesting season. In harvested transects, residual vegetation was shorter and the litter layer was reduced in the year following harvest. Grassland bird species that preferred vegetation of short to moderate height and low to moderate density were found in harvested areas. Unharvested areas provided tall, dense vegetation structure that was especially attractive to tall-grass bird species, such as sedge wren (Cistothorus platensis) and Henslow's sparrow (Ammodramus henslowii). When considering wildlife habitat value in harvest management of switchgrass for biofuel, leaving some fields unharvested each year would be a good compromise, providing some habitat for a larger number of grassland bird species of management concern than if all fields were harvested annually. In areas where most idle grassland habitat present on the landscape is tallgrass, harvest of switchgrass for biofuel has the potential to increase the local diversity of grassland birds.

  4. GHG Emissions and Costs of Developing Biomass Energy in Malaysia: Implications on Energy Security in the Transportation and Electricity Sector

    NASA Astrophysics Data System (ADS)

    Hassan, Mohd Nor Azman

    Malaysia's transportation sector accounts for 48% of the country's total energy use. The country is expected to become a net oil importer by the year 2011. To encourage renewable energy development and relieve the country's emerging oil dependence, in 2006 the government mandated blending 5% palm-oil biodiesel in petroleum diesel. Malaysia produced 16 million tonnes of palm oil in 2007, mainly for food use. This study addresses maximizing bioenergy use from oil-palm to support Malaysia's energy initiative while minimizing greenhouse gas emissions from land use change. When converting primary and secondary forests to oil-palm plantations between 270 - 530 g and 120 -190 g CO2 equivalent (CO2-eq) per MJ of biodiesel produced, respectively, is released. However, converting degraded lands results in the capture of between 23 to 85 g CO2-eq per MJ of biodiesel produced. Using various combinations of land types, Malaysia could meet the 5% biodiesel target with a net GHG savings of about 1.03 million tonnes (4.9% of the transportation sector's diesel emissions) when accounting for the emissions savings from the diesel fuel displaced. Fossil fuels contributed about 93% to Malaysia's electricity generation mix and emit about 65 million tonnes (Mt) or 36% of the country's 2010 Greenhouse Gas (GHG) emissions. The government has set a target to install 330 MW biomass electricity by 2015, which is hoped to avoid 1.3 Mt of GHG emissions annually. The availability of seven types of biomass residues in Peninsular Malaysia is estimated based on residues-to-product ratio, recoverability and accessibility factor and other competing uses. It was found that there are approximately 12.2 Mt/yr of residues. Oil-palm residues contribute about 77% to the total availability with rice and forestry residues at 17%. Electricity from biomass can be produced via direct combustion in dedicated power plants or co-fired with coal. The co-firing of the residues at four existing coal plants in

  5. Extension and improvement of Central Station District heating budget period 1 and 2, Krakow Clean Fossil Fuels and Energy Efficiency Program. Final report

    SciTech Connect

    1997-07-01

    Project aim was to reduce pollution levels in the City of Krakow through the retirement of coal-fired (hand and mechanically-stoked) boiler houses. This was achieved by identifying attractive candidates and connecting them to the Krakow district heating system, thus permitting them to eliminate boiler operations. Because coal is less costly than district hot water, the district heating company Miejskie Przedsiebiorstwo Energetyki Cieplnej S.A., henceforth identified as MPEC, needed to provide potential customers with incentives for purchasing district heat. These incentives consisted of offerings which MPEC made to the prospective client. The offerings presented the economic and environmental benefits to district heating tie-in and also could include conservation studies of the facilities, so that consumption of energy could be reduced and the cost impact on operations mitigated. Because some of the targeted boiler houses were large, the capacity of the district heating network required enhancement at strategic locations. Consequently, project construction work included both enhancement to the district piping network as well as facility tie-ins. The process of securing new customers necessitated the strengthening of MPEC`s competitive position in Krakow`s energy marketplace, which in turn required improvements in marketing, customer service, strategic planning, and project management. Learning how US utilities address these challenges became an integral segment of the project`s scope.

  6. Skylarks trade size and energy content in weed seeds to maximize total ingested lipid biomass.

    PubMed

    Gaba, Sabrina; Collas, Claire; Powolny, Thibaut; Bretagnolle, François; Bretagnolle, Vincent

    2014-10-01

    The trade-off between forage quality and quantity has been particularly studied in herbivore organisms, but much less for seed eating animals, in particular seed-eating birds which constitute the bulk of wintering passerines in European farmlands. The skylark is one of the commonest farmland birds in winter, mainly feeding on seeds. We focus on weed seeds for conservation and management purposes. Weed seeds form the bulk of the diet of skylarks during winter period, and although this is still a matter for discussion, weed seed predation by granivorous has been suggested as an alternative to herbicides used to regulate weed populations in arable crops. Our objectives were to identify whether weed seed traits govern foraging decisions of skylarks, and to characterize key seed traits with respect to size, which is related to searching and handling time, and lipid content, which is essential for migratory birds. We combined a single-offer experiment and a multiple-offer one to test for feeding preferences of the birds by estimating seed intake on weed seed species differing in their seed size and seed lipid content. Our results showed (1) a selective preference for smaller seeds above a threshold of seed size or seed size difference in the pair and, (2) a significant effect of seed lipid biomass suggesting a trade-off between foraging for smaller seeds and selecting seeds rich in lipids. Skylarks foraging decision thus seems to be mainly based on seed size, that is presumably a 'proxy' for weed seed energy content. However, there are clearly many possible combinations of morphological and physiological traits that must play crucial role in the plant-bird interaction such as toxic compound or seed coat. PMID:25452078

  7. Genome-Wide Analysis of miRNA targets in Brachypodium and Biomass Energy Crops

    SciTech Connect

    Green, Pamela J.

    2015-08-11

    MicroRNAs (miRNAs) contribute to the control of numerous biological processes through the regulation of specific target mRNAs. Although the identities of these targets are essential to elucidate miRNA function, the targets are much more difficult to identify than the small RNAs themselves. Before this work, we pioneered the genome-wide identification of the targets of Arabidopsis miRNAs using an approach called PARE (German et al., Nature Biotech. 2008; Nature Protocols, 2009). Under this project, we applied PARE to Brachypodium distachyon (Brachypodium), a model plant in the Poaceae family, which includes the major food grain and bioenergy crops. Through in-depth global analysis and examination of specific examples, this research greatly expanded our knowledge of miRNAs and target RNAs of Brachypodium. New regulation in response to environmental stress or tissue type was found, and many new miRNAs were discovered. More than 260 targets of new and known miRNAs with PARE sequences at the precise sites of miRNA-guided cleavage were identified and characterized. Combining PARE data with the small RNA data also identified the miRNAs responsible for initiating approximately 500 phased loci, including one of the novel miRNAs. PARE analysis also revealed that differentially expressed miRNAs in the same family guide specific target RNA cleavage in a correspondingly tissue-preferential manner. The project included generation of small RNA and PARE resources for bioenergy crops, to facilitate ongoing discovery of conserved miRNA-target RNA regulation. By associating specific miRNA-target RNA pairs with known physiological functions, the research provides insights about gene regulation in different tissues and in response to environmental stress. This, and release of new PARE and small RNA data sets should contribute basic knowledge to enhance breeding and may suggest new strategies for improvement of biomass energy crops.

  8. Biomass Burning

    Atmospheric Science Data Center

    2015-07-27

    Projects:  Biomass Burning Definition/Description:  Biomass Burning: This data set represents the geographical and temporal distribution of total amount of biomass burned. These data may be used in general circulation models (GCMs) and ...

  9. GHG Emissions and Costs of Developing Biomass Energy in Malaysia: Implications on Energy Security in the Transportation and Electricity Sector

    NASA Astrophysics Data System (ADS)

    Hassan, Mohd Nor Azman

    Malaysia's transportation sector accounts for 48% of the country's total energy use. The country is expected to become a net oil importer by the year 2011. To encourage renewable energy development and relieve the country's emerging oil dependence, in 2006 the government mandated blending 5% palm-oil biodiesel in petroleum diesel. Malaysia produced 16 million tonnes of palm oil in 2007, mainly for food use. This study addresses maximizing bioenergy use from oil-palm to support Malaysia's energy initiative while minimizing greenhouse gas emissions from land use change. When converting primary and secondary forests to oil-palm plantations between 270 - 530 g and 120 -190 g CO2 equivalent (CO2-eq) per MJ of biodiesel produced, respectively, is released. However, converting degraded lands results in the capture of between 23 to 85 g CO2-eq per MJ of biodiesel produced. Using various combinations of land types, Malaysia could meet the 5% biodiesel target with a net GHG savings of about 1.03 million tonnes (4.9% of the transportation sector's diesel emissions) when accounting for the emissions savings from the diesel fuel displaced. Fossil fuels contributed about 93% to Malaysia's electricity generation mix and emit about 65 million tonnes (Mt) or 36% of the country's 2010 Greenhouse Gas (GHG) emissions. The government has set a target to install 330 MW biomass electricity by 2015, which is hoped to avoid 1.3 Mt of GHG emissions annually. The availability of seven types of biomass residues in Peninsular Malaysia is estimated based on residues-to-product ratio, recoverability and accessibility factor and other competing uses. It was found that there are approximately 12.2 Mt/yr of residues. Oil-palm residues contribute about 77% to the total availability with rice and forestry residues at 17%. Electricity from biomass can be produced via direct combustion in dedicated power plants or co-fired with coal. The co-firing of the residues at four existing coal plants in

  10. 77 FR 16828 - Turlock Irrigation District, & Modesto Irrigation District; Notice of Dispute Resolution Process...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-22

    ... Energy Regulatory Commission Turlock Irrigation District, & Modesto Irrigation District; Notice of... relicensing proceeding for the Don Pedro Hydroelectric Project No. 2299-075.\\1\\ Turlock Irrigation District and the Modesto Irrigation District (collectively, the Districts), are co-licensees for the Don...

  11. 76 FR 20971 - Turlock Irrigation District and Modesto Irrigation District; Notice of Intent To File License...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-14

    ... Energy Regulatory Commission Turlock Irrigation District and Modesto Irrigation District; Notice of..., 2011. d. Submitted By: Turlock Irrigation District and Modesto Irrigation District. e. Name of Project... Regulatory Affairs, Turlock Irrigation District, P.O. Box 949, Turlock, California 95381, 209-883-8241...

  12. 77 FR 4291 - Turlock Irrigation District; Modesto Irrigation District; Notice of Proposed Restricted Service...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-27

    ... Energy Regulatory Commission Turlock Irrigation District; Modesto Irrigation District; Notice of Proposed... any Order issuing a license. Turlock Irrigation District and Modesto Irrigation District, as the..., Turlock Irrigation District, P.O. Box 949, Turlock, CA 95381. Greg Dias or Representative,...

  13. Pollutant Emissions and Energy Efficiency under Controlled Conditions for Household Biomass Cookstoves and Implications for Metrics Useful in Setting International Test Standards

    EPA Science Inventory

    Realistic metrics and methods for testing household biomass cookstoves are required to develop standards needed by international policy makers, donors, and investors. Application of consistent test practices allows emissions and energy efficiency performance to be benchmarked and...

  14. Genetic Regulation of Grass Biomass Accumulation and Biological Conversion Quality (2013 DOE JGI Genomics of Energy and Environment 8th Annual User Meeting)

    SciTech Connect

    Hazen, Sam

    2013-03-01

    Sam Hazen of the University of Massachusetts on "Genetic Regulation of Grass Biomass Accumulation and Biological Conversion Quality" at the 8th Annual Genomics of Energy & Environment Meeting on March 27, 2013 in Walnut Creek, Calif.

  15. Biomass power and conventional fossil systems with and without CO2 sequestration - Comparing the energy balance, greenhouse gas emissions and economics

    SciTech Connect

    Spath, Pamela L.; Mann, Margaret K.

    2004-01-01

    Lifecycle analysis of coal-, natural gas- and biomass-based power generation systems with and without CO2 sequestration. Compares global warming potential and energy balance of these systems.

  16. Seasonal biomass and energy content in seagrass communities on the west coast of Florida

    SciTech Connect

    Dawes, C.J.; Hall, M.O.; Riechert, R.K.

    1985-01-01

    Seasonal collections were made over a 16 month period in seven seagrass communities on the west coast of Florida. The seagrass component accounted for at least 45% of the total biomass and Thalassia testudinum was the dominant species. The 15 month mean of total biomass at six sites that were dominated year around by T. testudinum from Tampa Bay to Cedar Key, Florida was 385 g dry weight m/sup 2/ or 1.42 tons dry weight/acre. The drift and attached seaweed components showed seasonal fluctuations in terms of species and biomass. Of the six open water sites, only one site, characterized by depressed salinity, showed significant differences in seasonal biomass for T. testudinum using a nested ANOVA and Student-Newman-Keul's test for variance. Available kilocalories ranged from a 16 month low of 344 to a high of 1837 kcal/m/sup 2/ with the highest biomass and caloric values occurring in the late spring and summer.

  17. Global Characterization of Biomass-Burning Patterns using Satellite Measurements of Fire Radiative Energy

    NASA Technical Reports Server (NTRS)

    Ichoku, Charles; Giglio, Louis; Wooster, Martin J.; Remer, Lorraine A.

    2008-01-01

    Remote sensing is the most practical means of measuring energy release from large open-air biomass burning. Satellite measurement of fire radiative energy (FRE) release rate or power (FRP) enables distinction between fires of different strengths. Based on a 1-km resolution fire data acquired globally by the MODerate-resolution Imaging Spectro-radiometer (MODIS) sensor aboard the Terra and Aqua satellites from 2000 to 2006, instanteaneous FRP values ranged between 0.02 MW and 1866 MW, with global daily means ranging between 20 and 40 MW. Regionally, at the Aqua-MODIS afternoon overpass, the mean FRP values for Alaska, Western US, Western Australia, Quebec and the rest of Canada are significantly higher than these global means, with Quebec having the overall highest value of 85 MW. Analysis of regional mean FRP per unit area of land (FRP flux) shows that a peak fire season in certain regions, fires can be responsible for up to 0.2 W/m(sup 2) at peak time of day. Zambia has the highest regional monthly mean FRP flux of approximately 0.045 W/m(sup 2) at peak time of day and season, while the Middle East has the lowest value of approximately 0.0005 W/m(sup 2). A simple scheme based on FRP has been devised to classify fires into five categories, to facilitate fire rating by strength, similar to earthquakes and hurricanes. The scheme uses MODIS measurements of FRP at 1-km resolution as follows: catagory 1 (less than 100 MW), category 2 (100 to less than 500 MW), category 3 (500 to less than 1000 MW), category 4 (1000 to less than 1500 MW), catagory 5 (greater than or equal to 1500 MW). In most regions of the world, over 90% of fires fall into category 1, while only less than 1% fall into each of categories 3 to 5, although these proportions may differ significantly from day to day and by season. The frequency of occurence of the larger fires is region specific, and could not be explained by ecosystem type alone. Time-series analysis of the propertions of higher category

  18. The impacts of a plume-rise scheme on earth system modeling: climatological effects of biomass aerosols on the surface temperature and energy budget of South America

    NASA Astrophysics Data System (ADS)

    de Menezes Neto, Otacilio L.; Coutinho, Mariane M.; Marengo, José A.; Capistrano, Vinícius B.

    2016-05-01

    Seasonal forest fires in the Amazon are the largest source of pollutants in South America. The impacts of aerosols due to biomass burning on the temperature and energy balance in South America are investigated using climate simulations from 1979 to 2005 using HadGEM2-ES, which includes the hot plume-rise scheme (HPR) developed by Freitas et al. (Estudos Avançados 19:167-185, 2005, Atmos Chem Phys 7:3385-3398, 2007, Atmos Chem Phys 10:585-594, 2010). The HPR scheme is used to estimate the vertical heights of biomass-burning aerosols based on the thermodynamic characteristics of the underlying model. Three experiments are performed. The first experiment includes the HPR scheme, the second experiment turns off the HPR scheme and the effects of biomass aerosols (BIOMASS OFF), and the final experiment assumes that all biomass aerosols are released at the surface (HPR OFF). Relative to the BIOMASS OFF experiment, the temperature decreased in the HPR experiment as the net shortwave radiation at the surface decreased in a region with a large amount of biomass aerosols. When comparing the HPR and HPR OFF experiments, the release of biomass aerosols higher on the atmosphere impacts on temperature and the energy budget because the aerosols were transported by strong winds in the upper atmospheric levels.

  19. User manual for AQUASTOR: a computer model for cost analysis of aquifer thermal energy storage coupled with district heating or cooling systems. Volume I. Main text

    SciTech Connect

    Huber, H.D.; Brown, D.R.; Reilly, R.W.

    1982-04-01

    A computer model called AQUASTOR was developed for calculating the cost of district heating (cooling) using thermal energy supplied by an aquifer thermal energy storage (ATES) system. The AQUASTOR model can simulate ATES district heating systems using stored hot water or ATES district cooling systems using stored chilled water. AQUASTOR simulates the complete ATES district heating (cooling) system, which consists of two principal parts: the ATES supply system and the district heating (cooling) distribution system. The supply system submodel calculates the life-cycle cost of thermal energy supplied to the distribution system by simulating the technical design and cash flows for the exploration, development, and operation of the ATES supply system. The distribution system submodel calculates the life-cycle cost of heat (chill) delivered by the distribution system to the end-users by simulating the technical design and cash flows for the construction and operation of the distribution system. The model combines the technical characteristics of the supply system and the technical characteristics of the distribution system with financial and tax conditions for the entities operating the two systems into one techno-economic model. This provides the flexibility to individually or collectively evaluate the impact of different economic and technical parameters, assumptions, and uncertainties on the cost of providing district heating (cooling) with an ATES system. This volume contains the main text, including introduction, program description, input data instruction, a description of the output, and Appendix H, which contains the indices for supply input parameters, distribution input parameters, and AQUASTOR subroutines.

  20. Utilization of emergent aquatic plants for biomass-energy-systems development

    SciTech Connect

    Kresovich, S.; Wagner, C.K.; Scantland, D.A.; Groet, S.S.; Lawhon, W.T.

    1982-02-01

    A review was conducted of the available literature pertaining to the following aspects of emergent aquatic biomass: identification of prospective emergent plant species for management; evaluation of prospects for genetic manipulation; evaluation of biological and environmental tolerances; examination of current production technologies; determination of availability of seeds and/or other propagules, and projections for probable end-uses and products. Species identified as potential candidates for production in biomass systems include Arundo donax, Cyperus papyrus, Phragmites communis, Saccharum spontaneum, Spartina alterniflora, and Typha latifolia. If these species are to be viable candidates in biomass systems, a number of research areas must be further investigated. Points such as development of baseline yield data for managed systems, harvesting conceptualization, genetic (crop) improvement, and identification of secondary plant products require refinement. However, the potential pay-off for developing emergent aquatic systems will be significant if development is successful.

  1. Advanced system demonstration for utilization of biomass as an energy source

    SciTech Connect

    Not Available

    1980-10-01

    The results of the study investigations confirm the feasibility of collecting 1000 oven dry tons of biomass per day to fuel a 510,000 lb/hr boiler operating in a congeneration mode and producing steam and electricity. This study was based on the supply of a significant portion of the facility's biomass fuel by tree harvesting and collection operations within a 50 mile radius of the plant site. These operations, including transporting biomass to the conversion plant, would pose no threat to the environment if good forestry practice is carefully maintained. Other environmental factors relating to air and water discharges from the conversion plant pose no significant technological problems in complying with federal, state, and local regulations at a cost that is competitive with similar costs associated with fossil fueled facilities.

  2. Ecology of agricultural monocultures: Some consequences for biodiversity in biomass energy farms

    SciTech Connect

    Hoffman, W.; Beyea, J.; Cook, J.H.

    1995-11-01

    Most developmental work on biomass crops has involved extensive monocultures of genetically uniform crops. We review the relevant ecology of agricultural monocultures, and some consequences of monocultural methods for the biomass industry. Monocultures can have very high primary productivity; indeed biomass crops are selected for high productivity. The seasonal tempo of productivity is often more punctuated in monocultures than in multispecies system, leaving temporal productivity gaps. In turn, folivorous insect diversity and abundance tends to track the foliage productivity. The productivity gaps may produce bottlenecks in herbivore abundance and diversity. Herbivore population dynamics tend to be less stable in monocultures, driving fluctuations in predator abundance and diversity. These bottlenecks and fluctuations can increase the frequency and severity of pest problems, for herbivorous insects usually respond to productivity increases faster than their predators. The spatial scaling of structural complexity is also critical to habitat value, particularly for vertebrates. At micro scales structural complexity is a function of plant structure. At meso scales, agricultural monocultures tend to be very uniform, compared to multispecies systems, and provide poorer habitat for species needing meso-scale diversity. We suggest three strategies to enhance or restore biodiversity while developing biomass crops. First, tailor the scale of plantings to the needs of wildlife in the system. Second, manage the deployment of the biomass plantings to be complementary to other landscape features. For example, concentrate biomass plantings on the most favorable sites in the landscape, and develop complementary habitat inclusions on poorer microsites. Third, develop crops and crop combinations to benefit wildlife as well as to provide high yields. Select and deploy crops and clones to bridge productivity gaps.

  3. Advanced system demonstration for utilization of biomass as an energy source

    SciTech Connect

    1980-10-01

    This report presents the results of a study undertaken to locate a site for the construction of a biomass cogeneration plant in the state of Maine. On the basis of the study, the site selected was Westbrook, Maine. The evaluation of sites was based on comparison of site-related variables such as: adequate biomass availability; cogeneration potential (market for steam produced); water availability; air quality compliance; access roads; site area required; and adequate tie-ins with electric power grids for sale of electricity produced. (DMC)

  4. Charter Districts.

    ERIC Educational Resources Information Center

    Lockwood, Anne Turnbaugh

    2002-01-01

    Interviews with superintendents of eight charter-school districts in four states: California, Florida, Georgia, and New Mexico. Describes advantages and disadvantages. Includes a list (with website addresses) of all current charter-school districts. (PKP)

  5. Advanced system demonstration for utilization of biomass as an energy source. Volume IV. Design drawings

    SciTech Connect

    1980-10-01

    This volume contains design drawings for the biomass cogeneration plant to be built in Maine. The drawings show a considerable degree of detail, however, they are not to be considered released for construction. There has been no actual procurement of equipment, therefore equipment drawings certified by suppliers have not been included. (DMC)

  6. Sustainability: The capacity of smokeless biomass pyrolysis for energy production, global carbon capture and sequestration

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Application of modern smokeless biomass pyrolysis for biochar and biofuel production is potentially a revolutionary approach for global carbon capture and sequestration at gigatons of carbon (GtC) scales. A conversion of about 7% of the annual terrestrial gross photosynthetic product (120 GtC y-1) i...

  7. Resource mapping and analysis of UK farm livestock manures: Assessing the opportunities for biomass-to-energy technologies

    SciTech Connect

    Dagnall, S.P.

    1995-11-01

    Livestock farms produce wastes with a high potential for pollution. Alternative, environmentally acceptable disposal routes might lie in biomass-to-energy schemes, generating revenue from the energy produced and fertiliser as a by-product; these are currently being developed, or assessed, for the UK under DTI/MAFF collaborative programmes; two options are being considered-direct combustion (12-14MW{sub e}) and centralised anaerobic digestion (0.1-1MW{sub e} CHP). One of the barriers to initiating such schemes is establishing where feedstocks are located in order that they may be exploited in a cost effective manner. Resource mapping and analysis using a Geographical Information System has been used to establish the opportunities for England and Wales. This work was carried out in two parts: produce spatially distributed resource data, of agro-industrial wastes and farm livestock manures, expressed in tonnes dry solids, from which energy production figures were derived; and develop algorithms to establish how much of this resource could be feasibly exploited. By comparing these resource data with other appropriate information (e.g., road networks, environmentally sensitive areas, grid interconnections), the optimum location and size of potential biomass-to-energy plants were determined. Whilst interest in such schemes is anticipated to grow further over the next few years, their future will be heavily dependent upon the level of concern for wider environmental issues.

  8. Energy efficient production of hydrogen and syngas from biomass: development of low-temperature catalytic process for cellulose gasification.

    PubMed

    Asadullah, Mohammad; Ito, Shin-ichi; Kunimori, Kimio; Yamada, Muneyoshi; Tomishige, Keiichi

    2002-10-15

    The Rh/CeO2/M (M = SiO2, Al2O3, and ZrO2) type catalysts with various compositions have been prepared and investigated in the gasification of cellulose, a model compound of biomass, in a fluidized bed reactor at 500-700 degrees C. The conventional nickel and dolomite catalysts have also been investigated. Among the catalysts, Rh/CeO2/SiO2 with 35% CeO2 has been found to be the best catalyst with respect to the carbon conversion to gas and product distribution. The steam addition contributed to the complete conversion of cellulose to gas even at 600 degrees C. Lower steam supply gave the syngas and higher steam supply gave the hydrogen as the major product. Hydrogen and syngas from cellulose or cellulosic biomass gasification are environmentally super clean gaseous fuels for power generation. Moreover, the syngas derived liquid fuels such as methanol, dimethyl ether, and synthetic diesels are also super clean transportation fuels. However, the use of cellulose or cellulosic biomass for energy source through the gasification is challenging because of the formation of tar and char during the gasification process. It is interesting that no tar or char was finally formed in the effluent gas at as low as 500-600 degrees C using Rh/CeO2/SiO2(35) catalyst in this process. PMID:12387426

  9. Application of sugar maple and black locust to the biomass/energy plantation concept. Final report, April 1984

    SciTech Connect

    Mroz, G.D.; Jurgensen, M.F.; Lai, Y.Z.; Liechty, H.O.; Hamlin, D.C.; Gale, M.F.; Sajak, R.L.; Stinhilb, H.M.

    1986-08-01

    Forests in the Upper Lakes States region, composed predominantly of sugar maple and red maple with a large number of stems in small diameter classes, were evaluated for conversion to biomass/energy plantations. The study included examining the use of black locust as an interplant species to improve maple productivity. Available water and phosphorus were found to be highly correlated with site index and biomass on the sites. Skidding of trees with tops intact caused widespread disruption of forest floor horizons. Natural coppice regrowth on all sites was poor. Results indicate it is not feasible to coppice natural stands of northern hardwoods on a 4-year rotation. Survival of interplanted black locust was very poor due to susceptibility to frost. The potential of black locust as a biomass species for SRIC plantations was demonstrated by the exceptional growth of surviving individuals. A provenance trial of 20 seed sources showed variability in frost resistance among seed sources. Data is presented on the wood characteristics of seven northern hardwoods species show that young sprouts have higher moisture content, seasonal moisture content variation, higher extractive and ash content, a lower specific gravity and lower thermal stability. All species evaluated are comparable in terms of major chemical composition, caloric values, and extent of gasification. 111 refs., 11 figs., 35 tabs.

  10. Biomass power in transition

    SciTech Connect

    Marshall, D.K.

    1996-12-31

    Electricity production from biomass fuel has been hailed in recent years as an environmentally acceptable energy source that delivers on its promise of economically viable renewable energy. A Wall Street Journal article from three years ago proclaimed wood to be {open_quotes}moving ahead of costly solar panels and wind turbines as the leading renewable energy alternative to air-fouling fossils fuels and scary nuclear plants.{close_quotes} Biomass fuel largely means wood; about 90% of biomass generated electricity comes from burning waste wood, the remainder from agricultural wastes. Biomass power now faces an uncertain future. The maturing of the cogeneration and independent power plant market, restructuring of the electric industry, and technological advances with power equipment firing other fuels have placed biomass power in a competitive disadvantage with other power sources.

  11. A multicriteria approach to evaluate district heating system options

    SciTech Connect

    Ghafghazi, Saeed; Sowlati, T.; Sokhansanj, Shahabaddine; Melin, Staffan

    2009-07-01

    District energy systems, in which renewable energy sources may be utilized, are centralized systems to provide energy to residential and commercial buildings. The aim of this paper is to evaluate and rank energy sources available for a case of district heating system in Vancouver, Canada, based on multiple criteria and the view points of different stakeholders, and to show how communication would affect the ranking of alternatives. The available energy sources are natural gas, biomass (wood pellets), sewer heat, and geothermal heat. The evaluation criteria include GHG emissions, particulate matter emissions, maturity of technology, traffic load, and local source. In order to rank the energy options the PROMETHEE method is used. In this paper, two different scenarios were developed to indicate how the communication between the stakeholders would affect their preferences about criteria weights and would change the ranking of alternatives. The result of this study shows that without communication the best energy source for the considered district energy system is different for different stakeholders. While, addressing concerns through efficient communication would result in a general consensus. In this case, wood pellet is the best energy alternative for all the stakeholders.

  12. The 1985 Biomass Burning Season in South America: Satellite Remote Sensing of Fires, Smoke, and Regional Radiative Energy Budgets

    NASA Technical Reports Server (NTRS)

    Christopher, Sundar A.; Wang, Min; Berendes, Todd A.; Welch, Ronald M.; Yang, Shi-Keng

    1998-01-01

    Using satellite imagery, more than five million square kilometers of the forest and cerrado regions over South America are extensively studied to monitor fires and smoke during the 1985 biomass burning season. The results are characterized for four major ecosystems, namely: (1) tropical rain forest, (2) tropical broadleaf seasonal, (3) savannah/grass and seasonal woods (SGW), and (4) mild/warm/hot grass/shrub (MGS). The spatial and temporal distribution of fires are examined from two different methods using the multispectral Advanced Very High Resolution Radiometer Local Area Coverage data. Using collocated measurements from the instantaneous scanner Earth Radiation Budget Experiment data, the direct regional radiative forcing of biomass burning aerosols is computed. The results show that more than 70% of the fires occur in the MGS and SGW ecosystems due to agricultural practices. The smoke generated from biomass burning has negative instantaneous net radiative forcing values for all four major ecosystems within South America. The smoke found directly over the fires has mean net radiative forcing values ranging from -25.6 to -33.9 W m(exp -2). These results confirm that the regional net radiative impact of biomass burning is one of cooling. The spectral and broadband properties for clear-sky and smoke regions are also presented that could be used as input and/or validation for other studies attempting to model the impact of aerosols on the earth-atmosphere system. These results have important applications for future instruments from the Earth Observing System (EOS) program. Specifically, the combination of the Visible Infrared Scanner and Clouds and the Earth's Radiant Energy System (CERES) instruments from the Tropical Rainfall Measuring Mission and the combination of Moderate Resolution Imaging Spectrometer and CERES instruments from the EOS morning crossing mission could provide reliable estimates of the direct radiative forcing of aerosols on a global scale

  13. Biomass Processing Photolibrary

    DOE Data Explorer

    Research related to bioenergy is a major focus in the U.S. as science agencies, universities, and commercial labs seek to create new energy-efficient fuels. The Biomass Processing Project is one of the funded projects of the joint USDA-DOE Biomass Research and Development Initiative. The Biomass Processing Photolibrary has numerous images, but there are no accompanying abstracts to explain what you are seeing. The project website, however, makes available the full text of presentations and publications and also includes an exhaustive biomass glossary that is being developed into an ASAE Standard.

  14. Economic scales for first-generation biomass-gasifier/gas turbine combined cycles fueled from energy plantations

    SciTech Connect

    Larson, E.D.; Marrison, C.I.

    1997-04-01

    This paper assesses the scales at which commercial, first-generation biomass integrated-gasifier/gas turbine combined cycle (BIG/GTCC) technology is likely to be most economic when fueled by plantation-derived biomass. First-generation BIG/GTCC systems are likely to be commercially offered by vendors beginning around 2000 and will be based on either pressurized or atmospheric-pressure gasification. Both plant configurations are considered here, with estimates of capital and operating costs drawn from published and other sources. Prospective costs of a farm-grown energy crop (switchgrass) delivered to a power plant are developed with the aid of a geographic information system (GIS) for agricultural regions in the North Central and Southeast US in the year 2000 and 2020. A simplified approach is applied to estimate the cost of delivering chipped eucalyptus from an existing plantation in Northeast Brazil. The optimum capacity (MW{sub opt}), defined as that which yields the minimum calculated cost of electricity (COE{sub m}), varies by geographic region due to differences in delivered biomass costs. With pressurized BIG/GTCC plants, MW{sup opt} is in the range of 230--320 MW{sub e} for the sites considered, assuming most of the land around the power plant is farmed for energy crop production. For atmospheric-pressure BIG/GTCC plants, MW{sub opt} ranges from 110 to 142 MW{sub e}. When a lower fraction of the land around a plant is used for energy farming, values for MW{sub opt} are smaller than these. In all cases, the cost of electricity is relatively insensitive to plant capacity over a wide range around MW{sub opt}.

  15. Merging satellite measurements of fire radiative energy and burned area products to estimate biomass burning: A European case study

    NASA Astrophysics Data System (ADS)

    Bistinas, I.; Saldaña, G. L.; Oom, D.; Sá, A. C.; Silva, J. M.; Pereira, J.

    2013-05-01

    Biomass burning is a key element of the terrestrial carbon cycle that influences the global radiation budget through the biomass consumption and the subsequently release of aerosols and trace gases into the atmosphere having huge impacts on the global climate. Recently, global products of daily fire activity have recorded Fire Radiative Power (FRP), providing a quantitative assessment of fire intensity across the globe. Several studies showed that FRP is proportional to the fire's fuel consumption and smoke emission rates through integration of the FRP over time, deriving the Fire Radiative Energy (FRE), which can be assumed as the total energy released over a spatio-temporal unit and used to infer total emissions from biomass burning in various ecosystems, omitting fuel load and combustion completeness information that are characterized by significant uncertainties at continental and global scale, and at the same time simplifying the computation of spatially explicit fuel consumption estimates. This study integrates spatial and temporal analysis using FRP data from the geostationary Spinning Enhanced Visible and Infrared Imager (SEVIRI) for the year 2008 and burned area from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor (MCD64A1) for the same year focusing on Europe. An intercomparison assessment of the emission estimates with the Global Fire Data Emissions Database (GFED) followed, due to lack of FRE and combustion measurements in large scale for validation. We show that the fire-emitted energy approach can be used in continental scale reducing uncertainties in emission estimates which may lead to simplification of the fire parameterization in fire modelling, yet in more robust simulations.

  16. Direct utilization of geothermal energy for Haakon School District, South Dakota. Final report, January 1977-March 1985

    SciTech Connect

    Hengel, R.J.

    1985-03-01

    This report is a summary of a project which demonstrates the successful use of geothermal energy for service water and space heating of school, business and commercial buildings in the city of Philip, South Dakota. The project included a new well into the Madison limestone formation, a pipe line to the school and through the central business district to a treatment plant, the treatment plant and settling ponds, conversion of the existing space heating systems of the buildings to equipment suitable for heating with the geothermal energy and monitoring the system to determine operating characteristics and efficiency. The treated water is discharged into the north fork of the Bad River for use by down stream irrigators. 24 figs., 19 tabs.

  17. Using CORE Model-Based Systems Engineering Software to Support Program Management in the U.S. Department of Energy Office of the Biomass Project: Preprint

    SciTech Connect

    Riley, C.; Sandor, D.; Simpkins, P.

    2006-11-01

    This paper describes how a model-based systems engineering software, CORE, is helping the U. S. Department of Energy's Office of Biomass Program assist with bringing biomass-derived biofuels to the market. This software tool provides information to guide informed decision-making as biomass-to-biofuels systems are advanced from concept to commercial adoption. It facilitates management and communication of program status by automatically generating custom reports, Gantt charts, and tables using the widely available programs of Microsoft Word, Project and Excel.

  18. Microbial surface displayed enzymes based biofuel cell utilizing degradation products of lignocellulosic biomass for direct electrical energy.

    PubMed

    Fan, Shuqin; Hou, Chuantao; Liang, Bo; Feng, Ruirui; Liu, Aihua

    2015-09-01

    In this work, a bacterial surface displaying enzyme based two-compartment biofuel cell for the direct electrical energy conversion from degradation products of lignocellulosic biomass is reported. Considering that the main degradation products of the lignocellulose are glucose and xylose, xylose dehydrogenase (XDH) displayed bacteria (XDH-bacteria) and glucose dehydrogenase (GDH) displayed bacteria (GDH-bacteria) were used as anode catalysts in anode chamber with methylene blue as electron transfer mediator. While the cathode chamber was constructed with laccase/multi-walled-carbon nanotube/glassy-carbon-electrode. XDH-bacteria exhibited 1.75 times higher catalytic efficiency than GDH-bacteria. This assembled enzymatic fuel cell exhibited a high open-circuit potential of 0.80 V, acceptable stability and energy conversion efficiency. Moreover, the maximum power density of the cell could reach 53 μW cm(-2) when fueled with degradation products of corn stalk. Thus, this finding holds great potential to directly convert degradation products of biomass into electrical energy. PMID:26051524

  19. User manual for AQUASTOR: a computer model for cost analysis of aquifer thermal-energy storage oupled with district-heating or cooling systems. Volume II. Appendices

    SciTech Connect

    Huber, H.D.; Brown, D.R.; Reilly, R.W.

    1982-04-01

    A computer model called AQUASTOR was developed for calculating the cost of district heating (cooling) using thermal energy supplied by an aquifer thermal energy storage (ATES) system. the AQUASTOR Model can simulate ATES district heating systems using stored hot water or ATES district cooling systems using stored chilled water. AQUASTOR simulates the complete ATES district heating (cooling) system, which consists of two prinicpal parts: the ATES supply system and the district heating (cooling) distribution system. The supply system submodel calculates the life-cycle cost of thermal energy supplied to the distribution system by simulating the technical design and cash flows for the exploration, development, and operation of the ATES supply system. The distribution system submodel calculates the life-cycle cost of heat (chill) delivered by the distribution system to the end-users by simulating the technical design and cash flows for the construction and operation of the distribution system. The model combines the technical characteristics of the supply system and the technical characteristics of the distribution system with financial and tax conditions for the entities operating the two systems into one techno-economic model. This provides the flexibility to individually or collectively evaluate the impact of different economic and technical parameters, assumptions, and uncertainties on the cost of providing district heating (cooling) with an ATES system. This volume contains all the appendices, including supply and distribution system cost equations and models, descriptions of predefined residential districts, key equations for the cooling degree-hour methodology, a listing of the sample case output, and appendix H, which contains the indices for supply input parameters, distribution input parameters, and AQUASTOR subroutines.

  20. Biomass and energy transfer to baleen whales in the South Atlantic sector of the Southern Ocean

    NASA Astrophysics Data System (ADS)

    Reilly, S.; Hedley, S.; Borberg, J.; Hewitt, R.; Thiele, D.; Watkins, J.; Naganobu, M.

    2004-06-01

    Baleen whales are an important group of predators on Antarctic krill in the Southern Ocean. During the CCAMLR 2000 Survey to estimate the biomass and distribution of Antarctic krill, International Whaling Commission observers carried out a visual line transect survey to estimate the number of baleen whales occurring in the survey area. This paper reviews techniques used to estimate krill consumption by baleen whales and in combination with estimates of whale abundance estimates of krill consumption are generated for the South Atlantic sector of the Southern Ocean. This survey estimates that the present populations of whales feeding in this region are likely to consume approximately 1.6 million tonnes, but possibly up to as much as 2.7 million tonnes of krill within the summer season. Although this only represents 4-6% of the estimated krill biomass in the region (and probably less than this percentage of the total annual krill production), the depleted numbers of baleen whales resulting from past or current whaling activities should be taken into account when setting quotas for the commercial exploitation of krill if there is to be a recovery to pre-exploitation biomass levels of baleen whales.

  1. Alaska Regional Energy Resources Planning Project. Phase 2: coal, hydroelectric and energy alternatives. Volume I. Beluga Coal District Analysis

    SciTech Connect

    Rutledge, G.; Lane, D.; Edblom, G.

    1980-01-01

    This volume deals with the problems and procedures inherent in the development of the Beluga Coal District. Socio-economic implications of the development and management alternatives are discussed. A review of permits and approvals necessary for the initial development of Beluga Coal Field is presented. Major land tenure issues in the Beluga Coal District as well as existing transportation routes and proposed routes and sites are discussed. The various coal technologies which might be employed at Beluga are described. Transportation options and associated costs of transporting coal from the mine site area to a connecting point with a major, longer distance transportation made and of transporting coal both within and outside (exportation) the state are discussed. Some environmental issues involved in the development of the Beluga Coal Field are presented. (DMC)

  2. Estimates of spatial and temporal variation of energy crops biomass yields in the US

    NASA Astrophysics Data System (ADS)

    Song, Y.; Jain, A. K.; Landuyt, W.; Kheshgi, H. S.

    2013-12-01

    Perennial grasses, such as switchgrass (Panicum viragatum) and Miscanthus (Miscanthus x giganteus) have been identified for potential use as biomass feedstocks in the US. Current research on perennial grass biomass production has been evaluated on small-scale plots. However, the extent to which this potential can be realized at a landscape-scale will depend on the biophysical potential to grow these grasses with minimum possible amount of land that needs to be diverted from food to fuel production. To assess this potential three questions about the biomass yield for these grasses need to be answered: (1) how the yields for different grasses are varied spatially and temporally across the US; (2) whether the yields are temporally stable or not; and (3) how the spatial and temporal trends in yields of these perennial grasses are controlled by limiting factors, including soil type, water availability, climate, and crop varieties. To answer these questions, the growth processes of the perennial grasses are implemented into a coupled biophysical, physiological and biogeochemical model (ISAM). The model has been applied to quantitatively investigate the spatial and temporal trends in biomass yields for over the period 1980 -2010 in the US. The bioenergy grasses considered in this study include Miscanthus, Cave-in-Rock switchgrass and Alamo switchgrass. The effects of climate, soil and topography on the spatial and temporal trends of biomass yields are quantitatively analyzed using principal component analysis and GIS based geographically weighted regression. The spatial temporal trend results are evaluated further to classify each part of the US into four homogeneous potential yield zones: high and stable yield zone (HS), high but unstable yield zone (HU), low and stable yield zone (LS) and low but unstable yield zone (LU). Our preliminary results indicate that the yields for perennial grasses among different zones are strongly related to the different controlling factors

  3. What To Teach in Your School District After the Energy Crisis Sputters

    ERIC Educational Resources Information Center

    Freeman, S. David

    1974-01-01

    The current energy crisis provides the opportunity to supply the next generation of Americans with the information and insights necessary to deal rationally with energy needs, changing lifestyles, environmental concerns, and the control of energy decisions that affect everyone. (Author)

  4. Mini-biomass electric generation

    SciTech Connect

    Elliot, G.

    1997-12-01

    Awareness of the living standards achieved by others has resulted in a Russian population which is yearning for a higher standard of living. Such a situation demands access to affordable electricity in remote areas. Remote energy requirements creates the need to transport power or fossil fuels over long distances. Application of local renewable energy resources could eliminate the need for and costs of long distance power supply. Vast forest resources spread over most of Russia make biomass an ideal renewable energy candidate for many off-grid villages. The primary objective for this preliminary evaluation is to examine the economic feasibility of replacing distillate and gasoline fuels with local waste biomass as the primary fuel for village energy in outlying regions of Russia. Approximately 20 million people live in regions where Russia`s Unified Electric System grid does not penetrate. Most of these people are connected to smaller independent power grids, but approximately 8 million Russians live in off-grid villages and small towns served by stand-alone generation systems using either diesel fuel or gasoline. The off-grid villages depend on expensive distillate fuels and gasoline for combustion in small boilers and engines. These fuels are used for both electricity generation and district heating. Typically, diesel generator systems with a capacity of up to 1 MW serve a collective farm, settlement and their rural enterprises (there are an estimated 10,000 such systems in Russia). Smaller gasoline-fueled generator systems with capacities in the range of 0.5 - 5 kW serve smaller farms or rural enterprises (there are about 60,000 such systems in Russia).

  5. Bioenergy co-products derived from microalgae biomass via thermochemical conversion--life cycle energy balances and CO2 emissions.

    PubMed

    Khoo, H H; Koh, C Y; Shaik, M S; Sharratt, P N

    2013-09-01

    An investigation of the potential to efficiently convert lipid-depleted residual microalgae biomass using thermochemical (gasification at 850 °C, pyrolysis at 550 °C, and torrefaction at 300 °C) processes to produce bioenergy derivatives was made. Energy indicators are established to account for the amount of energy inputs that have to be supplied to the system in order to gain 1 MJ of bio-energy output. The paper seeks to address the difference between net energy input-output balances based on a life cycle approach, from "cradle-to-bioenergy co-products", vs. thermochemical processes alone. The experimental results showed the lowest results of Net Energy Balances (NEB) to be 0.57 MJ/MJ bio-oil via pyrolysis, and highest, 6.48 MJ/MJ for gas derived via torrefaction. With the complete life cycle process chain factored in, the energy balances of NEBLCA increased to 1.67 MJ/MJ (bio-oil) and 7.01 MJ/MJ (gas). Energy efficiencies and the life cycle CO2 emissions were also calculated. PMID:23810951

  6. Elemental and thermo-chemical analysis of oil palm fronds for biomass energy conversion

    NASA Astrophysics Data System (ADS)

    Guangul, Fiseha Mekonnen; Sulaiman, Shaharin Anwar; Raghavan, Vijay R.

    2012-06-01

    Oil palm frond is the most abundant yet untapped biomass waste in Malaysia. This paper investigates the characteristics of raw oil palm fronds and its ash to evaluate its potential utilization as a biomass fuel for gasification process using single throat downdraft gasifier. The morphological nature, elemental content, proximate and ultimate analysis and calorific value were studied. Field emission scanning electron microscopy and x-ray fluorescence were used to investigate the surface morphology, elemental and mineralogical nature of oil palm frond and its ash. The results were compared with other agricultural and forestry biomass wastes. From proximate analysis volatile matter, fixed carbon and ash were found to be 83.5%, 15.2% and 1.3%, respectively on dry basis. From ultimate analysis result values of 44.58%, 4.53%, 0.71% and 0.07% for carbon, hydrogen, nitrogen and sulfur were found respectively on dry basis. Oxygen was determined by difference and found to be 48.81%. The proximate and ultimate analysis results indicate that oil palm frond is better than agricultural wastes and less than most forestry wastes to use as a feedstock in the gasification process in order to get a better quality of syngas. The amount of ash content in OPF was found to be much less than in agricultural wastes and higher than most forestry wastes. From x-ray fluorescence analysis CaO and K2O were found as the major oxides in oil palm fronds and rice husk ash with the amount of 28.46% and 15.71% respectively. The overall results of oil palm fronds were found to be satisfactory to use as a feedstock for the process of gasification.

  7. Convergence of Agriculture and Energy: II. Producing Cellulosic Biomass for Biofuels

    SciTech Connect

    Steven L. Fales; Wallace W. Wilhelm; J. Richard Hess

    2007-11-01

    The economic competitiveness of cellulosic ethanol production is highly dependent on feedstock cost, which constitutes 35-50% of the total ethanol production cost, depending on geographical factors such as biomass species, yield, location, climate, local economy, as well as the types of systems used for harvesting, collection, preprocessing, and transportation. Consequently, as the deployment of cellulosic ethanol biorefineries approaches, feedstock cost and availability are the driving factors that influence the selection of pioneer biorefinery locations, and these same factors will largely control the rate at which this industry grows. Due to geographic variability and complex distributed supply system dynamics, estimating feedstock costs and supplies has been a major source of uncertainty.

  8. BIOMASS UTILIZATION

    EPA Science Inventory

    The biomass utilization task consists of the evaluation of a biomass conversion technology including research and development initiatives. The project is expected to provide information on co-control of pollutants, as well as, to prove the feasibility of biomass conversion techn...

  9. Biomass pretreatment

    SciTech Connect

    Hennessey, Susan Marie; Friend, Julie; Elander, Richard T; Tucker, III, Melvin P

    2013-05-21

    A method is provided for producing an improved pretreated biomass product for use in saccharification followed by fermentation to produce a target chemical that includes removal of saccharification and or fermentation inhibitors from the pretreated biomass product. Specifically, the pretreated biomass product derived from using the present method has fewer inhibitors of saccharification and/or fermentation without a loss in sugar content.

  10. Central Africa Energy: Utilizing NASA Earth Observations to Explore Flared Gas as an Energy Source Alternative to Biomass in Central Africa

    NASA Technical Reports Server (NTRS)

    Jones, Amber; White, Charles; Castillo, Christopher; Hitimana, Emmanuel; Nguyen, Kenny; Mishra, Shikher; Clark, Walt

    2014-01-01

    Much of Central Africa's economy is centered on oil production. Oil deposits lie below vast amounts of compressed natural gas. The latter is often flared off during oil extraction due to a lack of the infrastructure needed to utilize it for productive energy generation. Though gas flaring is discouraged by many due to its contributions to greenhouse emissions, it represents a waste process and is rarely tracked or recorded in this region. In contrast to this energy waste, roughly 80% of Africa's population lacks access to electricity and in turn uses biomass such as wood for heat and light. In addition to the dangers incurred from collecting and using biomass, the practice commonly leads to ecological change through the acquisition of wood from forests surrounding urban areas. The objective of this project was to gain insight on domestic energy usage in Central Africa, specifically Angola, Gabon, and the Republic of Congo. This was done through an analysis of deforestation, an estimation of gas flared, and a suitability study for the infrastructure needed to realize the natural gas resources. The energy from potential natural gas production was compared to the energy equivalent of the biomass being harvested. A site suitability study for natural gas pipeline routes from flare sites to populous locations was conducted to assess the feasibility of utilizing natural gas for domestic energy needs. Analyses and results were shared with project partners, as well as this project's open source approach to assessing the energy sector. Ultimately, Africa's growth demands energy for its people, and natural gas is already being produced by the flourishing petroleum industry in numerous African countries. By utilizing this gas, Africa could reduce flaring, recuperate the financial and environmental loss that flaring accounts for, and unlock a plentiful domestic energy source for its people. II. Introduction Background Africa is home to numerous burgeoning economies; a

  11. Selection of high producing shrubs of the Western United States for energy biomass. Final report, April 1, 1978-October 31, 1981. [Saltbush, sagebrush, rabbitbrush, and greasewood

    SciTech Connect

    McKell, C.M.; Van Epps, G.A.; Barker, J.R.

    1981-01-01

    This project investigated the selection and preliminary study of the most productive native shrubs that are commonly found growing on millions of acres of arid and semiarid lands of the Western United States for their potential use as energy fuel from biomass. Many uncertainties exist in producing biomass for energy fuels. However, arid land shrub biomass production offers several advantages that may be more favorable than other biomass types. Shrubs could utilize available marginal croplands and rangelands; there would be little or no competition for scarce water resources, and within the wide diversity of native shrubs, a number of species have a potential for relatively large biomass production. Species chosen for study were fourwing saltbush (Atriplex canescens), big saltbush (A. lentiformis), big sagebrush (Artemisia tridentata), spreading rabbitbrush (Chrysothamnus linifolis), rubber rabbitbrush (C. nauseosus), and greasewood (Sarcobatus vermiculatus). The study was divided into three phases. Phase one dealt with the selection, measurement, and burning quality of large growing shrubs in native populations. The main objective of phase two was to measure the biomass production of the selected large growing shrubs at a dryland field research station for three years. In addition the influence of planting space was ascertained. In phase three the genetic differences of large and small sagebrush (A. tridentata) were evaluated. 15 figs., 24 tabs.

  12. Investigation of Biomass Combustion Rate of Fire Radiative Energy Using Multiple-Satellite-observed Active Fires and Landsat TM Burn Severities across the Continental United States

    NASA Astrophysics Data System (ADS)

    Li, F.; Zhang, X.; Kondragunta, S.

    2015-12-01

    Biomass burning is a major source of atmospheric aerosol and greenhouse gases that substantially influence climate and regional air quality. However, the accuracy of biomass burning emissions estimated using traditional method is limited by large uncertainties in burned area and fuel loading. Alternatively, fire radiative energy (FRE) has recently been demonstrated to be linearly related to biomass combustion, which potentially improves the estimation of biomass burning emissions. The FRE-based combustion rate is 0.368-0.453 kg/MJ according to field controlled experiments while it varies from 1.37-4.5 kg/MJ derived from satellite-based bottom-up and top-down aerosol optical thickness estimates. Here we investigate the FRE combustion rate in over 1000 burn scars from 2011 to 2012 across the Continental United States (CONUS). Specifically, FRE was calculated by combining the high spatial observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) and the high temporal observations from the Geostationary Operational Environmental Satellite (GOES). Biomass consumption in burn scars was modeled using Landsat TM 30m burn severities, 30m fuel loading from Fuel Characteristic Classification System, and combustion completeness compiled from recent literatures. The combustion rate was then investigated by correlating FRE to biomass consumption across CONUS and Bailey's ecoregions. Our results show that the combustion rate can be extracted from the linear relationship between biomass consumption and FRE. The combustion rate is 0.415±10% kg/MJ across CONUS, which is similar to the rate derived from field experiments. However, it varies from 0.18-1.9 kg/MJ among ecoregions. This implies that a single combustion rate could produce large uncertainty in the estimation of biomass consumption at large scales. We suggest that ecoregion specified combustion rates should help to improve the accuracy of quantifying biomass burning emissions regionally and globally.

  13. 75 FR 43519 - Parker-Davis Project; Transmission Capacity for Renewable Energy Between Electrical District No...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-26

    ... Area Power Administration Parker-Davis Project; Transmission Capacity for Renewable Energy Between... purpose of transmitting renewable energy. Specifically, Western is soliciting interest from entities looking to transfer renewable energy from the area south of Phoenix, Arizona to the Palo Verde market...

  14. 77 FR 21556 - Don Pedro Hydroelectric Project: Turlock Irrigation District; Modesto Irrigation District...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-10

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Don Pedro Hydroelectric Project: Turlock Irrigation District; Modesto Irrigation District; Supplement to Notice of Study Dispute Resolution Technical Conference On March 16,...

  15. Large-Scale Utilization of Biomass Energy and Carbon Dioxide Capture and Storage in the Transport and Electricity Sectors under Stringent CO2 Concentration Limit Scenarios

    SciTech Connect

    Luckow, Patrick; Wise, Marshall A.; Dooley, James J.; Kim, Son H.

    2010-08-05

    This paper examines the potential role of large scale, dedicated commercial biomass energy systems under global climate policies designed to meet atmospheric concentrations of CO2 at 400ppm and 450ppm by the end of the century. We use an integrated assessment model of energy and agriculture systems to show that, given a climate policy in which terrestrial carbon is appropriately valued equally with carbon emitted from the energy system, biomass energy has the potential to be a major component of achieving these low concentration targets. A key aspect of the research presented here is that the costs of processing and transporting biomass energy at much larger scales than current experience are explicitly incorporated into the modeling. From the scenario results, 120-160 EJ/year of biomass energy is produced globally by midcentury and 200-250 EJ/year by the end of this century. In the first half of the century, much of this biomass is from agricultural and forest residues, but after 2050 dedicated cellulosic biomass crops become the majority source, along with growing utilization of waste-to-energy. The ability to draw on a diverse set of biomass based feedstocks helps to reduce the pressure for drastic large-scale changes in land use and the attendant environmental, ecological, and economic consequences those changes would unleash. In terms of the conversion of bioenergy feedstocks into value added energy, this paper demonstrates that biomass is and will continue to be used to generate electricity as well as liquid transportation fuels. A particular focus of this paper is to show how climate policies and technology assumptions - especially the availability of carbon dioxide capture and storage (CCS) technologies - affect the decisions made about where the biomass is used in the energy system. The potential for net-negative electric sector emissions through the use of CCS with biomass feedstocks provides an attractive part of the solution for meeting stringent

  16. 75 FR 43958 - Turlock Irrigation District and Modesto Irrigation District; Notice of Application for Amendment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-27

    ... Energy Regulatory Commission Turlock Irrigation District and Modesto Irrigation District; Notice of...: May 24, 2010. d. Applicant: Turlock Irrigation District and Modesto Irrigation District. e. Name of.... g. Filed Pursuant to: Federal Power Act, 16 USC 791a-825r. h. Applicant Contact: Turlock...

  17. 75 FR 35778 - Modesto Irrigation District and Turlock Irrigation District; Notice of Preliminary Permit...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-23

    ... Energy Regulatory Commission Modesto Irrigation District and Turlock Irrigation District; Notice of... Competing Applications June 16, 2010. On February 1, 2010, Modesto Irrigation District and Turlock Irrigation District filed an application for a preliminary permit, pursuant to section 4(f) of the...

  18. High-yield harvest of nanofibers/mesoporous carbon composite by pyrolysis of waste biomass and its application for high durability electrochemical energy storage.

    PubMed

    Liu, Wu-Jun; Tian, Ke; He, Yan-Rong; Jiang, Hong; Yu, Han-Qing

    2014-12-01

    Disposal and recycling of the large scale biomass waste is of great concern. Themochemically converting the waste biomass to functional carbon nanomaterials and bio-oil is an environmentally friendly apporach by reducing greenhouse gas emissions and air pollution caused by open burning. In this work, we reported a scalable, "green" method for the synthesis of the nanofibers/mesoporous carbon composites through pyrolysis of the Fe(III)-preloaded biomass, which is controllable by adjustment of temperature and additive of catalyst. It is found that the coupled catalytic action of both Fe and Cl species is able to effectively catalyze the growth of the carbon nanofibers on the mesoporous carbon and form magnetic nanofibers/mesoporous carbon composites (M-NMCCs). The mechanism for the growth of the nanofibers is proposed as an in situ vapor deposition process, and confirmed by the XRD and SEM results. M-NMCCs can be directly used as electrode materials for electrochemical energy storage without further separation, and exhibit favorable energy storage performance with high EDLC capacitance, good retention capability, and excellent stability and durability (more than 98% capacitance retention after 10,000 cycles). Considering that biomass is a naturally abundant and renewable resource (over billions tons biomass produced every year globally) and pyrolysis is a proven technique, M-NMCCs can be easily produced at large scale and become a sustainable and reliable resource for clean energy storage. PMID:25372400

  19. Advanced Breeding, Development, and Release of High Biomass Energy Cane Cultivars in Florida

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Research into alternative energy sources has been on the rise since the 1970s. Novel sources of carbon-neutral energy are currently in high demand, but can pose different challenges in their development. Energy cane is a relatively new generation crop being bred as a source for biofuel feedstock and...

  20. District heating comes to town: The social shaping of an energy system

    SciTech Connect

    Summerton, J.

    1992-01-01

    This thesis concerns the process by which a sociotechnical system is shaped in its social and cultural context. The empirical focus is the introduction of a district heating system in an ordinary Swedish town in the 1980s. Drawing from recent theories from the history and sociology of science and technology (actor-network theory, systems approach), the study examines interactions among actors in introducing the technology, viewed as a multiorganizational grid-based system. Grid-based systems have a number of specific properties (long lead times, high investment costs, tight coupling, etc) that often prove problematic for system builders. As a multiorganization, the system is also characterized by inherent interoganizational tensions and a lack of sovereign control by any one actor. The story centers around critical issues or interorganizational conflicts of building the system in the town. These are: deciding to build (decision-making process), shaping the organization and acquiring competence, obtaining subscribers (marketing strategies)-and keeping them, dealing with regulation (conflicts over siting), and meeting competition. It is argued that these issues reflect the core challenges of system-building in multiorganizational grid-based systems, namely: (1) enrolling others in the shared purpose, (2) staking out, expanding and defending the market, (3) handling conflict, (4) dealing with limits to control, (5) coordinating and timing system expansion. The thesis concludes with an analysis of why the Swedish town succeeded in the task, what its experience suggests about how grid-based systems are shaped, and what criteria can be used to define a [open quotes]good[close quotes] system.

  1. Science K-12, Conservation of Energy. Utica City School District Articulated Curriculum: Project SEARCH, 1975.

    ERIC Educational Resources Information Center

    Utica City School District, NY.

    Two-column objectives are listed for an integrated science curriculum (Grades K-12), often subheaded according to science area (physical sciences, physics, biology, chemistry, general science) and grade level. Objectives that relate characteristics and forms of energy to energy conservation are stressed in the primary grades (K-6). In grade 7, the…

  2. Methanol production from eucalyptus wood chips. Attachment IV. Health and safety aspects of the eucalypt biomass to methanol energy system

    SciTech Connect

    Fishkind, H.H.

    1982-06-01

    The basic eucalyptus-to-methanol energy process is described and possible health and safety risks are identified at all steps of the process. The toxicology and treatment for exposure to these substances are described and mitigating measures are proposed. The health and safety impacts and risks of the wood gasification/methanol synthesis system are compared to those of the coal liquefaction and conversion system. The scope of this report includes the health and safety risks of workers (1) in the laboratory and greenhouse, where eucalyptus seedlings are developed, (2) at the biomass plantation, where these seedlings are planted and mature trees harvested, (3) transporting these logs and chips to the refinery, (4) in the hammermill, where the logs and chips will be reduced to small particles, (5) in the methanol synthesis plant, where the wood particles will be converted to methanol, and (6) transporting and dispensing the methanol. Finally, the health and safety risks of consumers using methanol is discussed.

  3. Energy from Marine Biomass Program presentation at the Bio-Energy '80, World Congress and Exposition, Atlanta, Georgia, Wednesday, April 23, 1980

    SciTech Connect

    Not Available

    1980-01-01

    The Energy from Marine Biomass Program, sponsored by the Gas Research Institute and the Department of Energy, now in the concept-validation phase, has the overall objective to develop integrated processes, (including feedstock production, harvesting, and conversion) to produce, from seaweed, methane and other fuels that are cost-competitive on a commercial basis with other alternative sources of energy. To accomplish this objective, quantitative determinations are being made through direct experimentation and evaluation of concepts for the feedstock production, harvesting, recovery of conversion by-products/co-products, and the essential supporting technologies required by integrated feedstock-to-product process systems. Work to date indicates that the technical developments required are within the state of the art of current engineering.

  4. Northeast Regional Biomass Program

    SciTech Connect

    Lusk, P.D.

    1992-12-01

    The Northeast Regional Biomass Program has been in operation for a period of nine years. During this time, state managed programs and technical programs have been conducted covering a wide range of activities primarily aim at the use and applications of wood as a fuel. These activities include: assessments of available biomass resources; surveys to determine what industries, businesses, institutions, and utility companies use wood and wood waste for fuel; and workshops, seminars, and demonstrations to provide technical assistance. In the Northeast, an estimated 6.2 million tons of wood are used in the commercial and industrial sector, where 12.5 million cords are used for residential heating annually. Of this useage, 1504.7 mw of power has been generated from biomass. The use of wood energy products has had substantial employment and income benefits in the region. Although wood and woodwaste have received primary emphasis in the regional program, the use of municipal solid waste has received increased emphasis as an energy source. The energy contribution of biomass will increase as potentia users become more familiar with existing feedstocks, technologies, and applications. The Northeast Regional Biomass Program is designed to support region-specific to overcome near-term barriers to biomass energy use.

  5. Biomass -- A new assessment

    SciTech Connect

    Hartung, H.A.

    1999-07-01

    Photo-conversion of atmospheric CO{sub 2} to biomass by plants is the world's basic source of food, fiber, oxygen and fossil fuel; for many people and some industries, biomass combustion supplies a significant amount of the energy they need. Much ingenuity has been applied to developing strategies for recovering energy directly from biomass by cleaning burning, gasification and liquid fuel production; these processes generally have economic or ecological features that keep them out of the main stream of technological development. By contrast, fresh biomass can be digested anaerobically at high conversion, with stimulation, to methane-rich gas and a stabilized organic residue, using technology already at hand. As an example, methane can be produced from sugarcane at a total cost of about $.50/mcf. This process, originally devised to control the level of CO{sub 2} in the atmosphere, provides opportunities to contribute to that goal while supplying clean pipeline gas, electricity or petrochemicals.

  6. Biomass power for rural development

    SciTech Connect

    Shepherd, P.

    2000-06-02

    Biomass is a proven option for electricity generation. A diverse range of biopower producers includes electric utilities, independent power producers, and the pulp and paper industry. To help expand opportunities for biomass power production, the U.S. Department of Energy established the Biopower Program and is sponsoring efforts to increase the productivity of dedicated energy crops. The Program aims to double biomass conversion efficiencies, thus reducing biomass power generation costs. These efforts will promote industrial and agricultural growth, improve the environment, create jobs, increase U.S. energy security, and provide new export markets.

  7. Direct use of geothermal energy, Elko, Nevada district heating. Final report

    SciTech Connect

    Lattin, M.W.; Hoppe, R.D.

    1983-06-01

    In early 1978 the US Department of Energy, under its Project Opportunity Notice program, granted financial assistance for a project to demonstrate the direct use application of geothermal energy in Elko, Nevada. The project is to provide geothermal energy to three different types of users: a commercial office building, a commercial laundry and a hotel/casino complex, all located in downtown Elko. The project included assessment of the geothermal resource potential, resource exploration drilling, production well drilling, installation of an energy distribution system, spent fluid disposal facility, and connection of the end users buildings. The project was completed in November 1982 and the three end users were brought online in December 1982. Elko Heat Company has been providing continuous service since this time.

  8. Assessing Public Preferences for Forest Biomass Based Energy in the Southern United States

    NASA Astrophysics Data System (ADS)

    Susaeta, Andres; Alavalapati, Janaki; Lal, Pankaj; Matta, Jagannadha R.; Mercer, Evan

    2010-04-01

    This article investigated public preferences for forest biomass based liquid biofuels, particularly ethanol blends of 10% ( E10) and 85% ( E85). We conducted a choice experiment study in three southern states in the United States: Arkansas, Florida, and Virginia. Reducing atmospheric CO2, decreasing risk of wildfires and pest outbreaks, and enhancing biodiversity were presented to respondents as attributes of using biofuels. Results indicated that individuals had a positive extra willingness to pay (WTP) for both ethanol blends. The extra WTP was greater for higher blends that offered larger environment benefits. The WTPs for E10 were 0.56 gallon-1, 0.58 gallon-1, and 0.48 gallon-1, and for E85 they were 0.82 gallon-1, 1.17 gallon-1, and 1.06 gallon-1 in Arkansas, Florida, and Virginia, respectively. Although differences in WTP for E10 were statistically insignificant among the three states, significant differences were found in the WTP for E85 between AR and FL and between AR and VA. Preferences for the environmental attributes appeared to be heterogeneous, as respondents’ were willing to pay a premium for E10 in all three states to facilitate the reduction of CO2 and the improvement of biodiversity but were not willing to pay more for E85 in order to enhance biodiversity.

  9. Biomass Scenario Model: BETO Analysis Platform Peer Review; NREL (National Renewable Energy Laboratory)

    SciTech Connect

    Bush, B.

    2015-03-23

    The Biomass Scenario Model (BSM) is a unique, carefully validated, state-of-the-art fourth-generation model of the domestic bioenergy supply chain which explicitly focuses on policy issues and their potential side effects. It integrates resource availability, behavior, policy, and physical, technological, and economic constraints. The BSM uses system-dynamics simulation to model dynamic interactions across the supply chain; it tracks the deployment of biofuels given technological development and the reaction of the investment community to those technologies in the context of land availability, the competing oil market, consumer demand for biofuels, and government policies over time. It places a strong emphasis on the behavior and decision-making of various economic agents. The model treats the major infrastructure-compatible fuels. Scenario analysis based on the BSM shows that the biofuels industry tends not to rapidly thrive without significant external actions in the early years of its evolution. An initial focus for jumpstarting the industry typically has strongest results in the BSM in areas where effects of intervention have been identified to be multiplicative. In general, we find that policies which are coordinated across the whole supply chain have significant impact in fostering the growth of the biofuels industry and that the production of tens of billions of gallons of biofuels may occur under sufficiently favorable conditions.

  10. Energy Conservation: An Examination of Energy Conservation Mechanisms As They Relate to School Districts in Region XI.

    ERIC Educational Resources Information Center

    Kerns, Marilyn

    This report attempts to supply information on energy conservation mechanisms that can be employed in schools to the public schools of Minnesota. The report begins by presenting guidelines for developing an energy conservation plan. The two models include the concept of Total Educational Energy Management as developed by the Colorado Department of…

  11. Kinetic and energy production analysis of pyrolysis of lignocellulosic biomass using a three-parallel Gaussian reaction model.

    PubMed

    Chen, Tianju; Zhang, Jinzhi; Wu, Jinhu

    2016-07-01

    The kinetic and energy productions of pyrolysis of a lignocellulosic biomass were investigated using a three-parallel Gaussian distribution method in this work. The pyrolysis experiment of the pine sawdust was performed using a thermogravimetric-mass spectroscopy (TG-MS) analyzer. A three-parallel Gaussian distributed activation energy model (DAEM)-reaction model was used to describe thermal decomposition behaviors of the three components, hemicellulose, cellulose and lignin. The first, second and third pseudocomponents represent the fractions of hemicellulose, cellulose and lignin, respectively. It was found that the model is capable of predicting the pyrolysis behavior of the pine sawdust. The activation energy distribution peaks for the three pseudo-components were centered at 186.8, 197.5 and 203.9kJmol(-1) for the pine sawdust, respectively. The evolution profiles of H2, CH4, CO, and CO2 were well predicted using the three-parallel Gaussian distribution model. In addition, the chemical composition of bio-oil was also obtained by pyrolysis-gas chromatography/mass spectrometry instrument (Py-GC/MS). PMID:27035484

  12. Minneapolis district-heating options

    NASA Astrophysics Data System (ADS)

    Stovall, T. K.; Borkowski, R. J.; Karnitz, M. A.; Strom, S.; Linwick, K.

    1981-10-01

    The feasibility of a large-scale district heating system for the Minneapolis central city area was investigated. The analysis was based on a previous city of St. Paul Hot-water district heating study and other studies done by a Swedish engineering firm. Capital costs such as building and heat source conversion, pipeline construction, and equipment were used in comparing the projected expenses of various district heating scenarios. Options such as coal, refuse-derived fuel burning, and cogeneration at the Riverside Power Station were discussed as energy supplies for a cost-effective district heating system.

  13. Environmental emissions and socioeconomic considerations in the production, storage, and transportation of biomass energy feedstocks

    SciTech Connect

    Perlack, R.D.; Ranney, J.W.; Wright, L.L.

    1992-07-01

    An analysis was conducted to identify major sources and approximate levels of emissions to land, air, and water, that may result, in the year 2010, from supplying biofuel conversion facilities with energy crops. Land, fuel, and chemicals are all used in the establishment, maintenance, harvest, handling and transport of energy crops. The operations involved create soil erosion and compaction, particulate releases, air emissions from fuel use and chemical applications, and runoff or leachate. The analysis considered five different energy facility locations (each in a different major crop growing region) and three classes of energy crops -- woody crops, perennial herbaceous grasses, and an annual herbaceous crop (sorghum). All projections had to be based on reasonable assumptions regarding probable species used, type of land used, equipment requirements, chemical input requirements, and transportation fuel types. Emissions were summarized by location and class of energy crop.

  14. Use of Direct and Indirect Estimates of Crown Dimensions to Predict One Seed Juniper Woody Biomass Yield for Alternative Energy Uses

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Throughout the western United States there is increased interest in utilizing woodland biomass as an alternative energy source. We conducted a pilot study to predict one seed juniper (Juniperus monosperma) chip yield from tree-crown dimensions measured on the ground or derived from Very Large Scale ...

  15. Environmental Implications of Biomass Removal

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Biomass removal from the soil surface after harvest or as the harvest operation and then sued for energy production offers the potential for a significant energy resource. There are challenges that arise with biomass removal in cropping systems in which the crop residue has remained on the soil sur...

  16. Energy, economic and environmental implications of production of grasses as biomass feedstocks

    SciTech Connect

    Downing, M.; McLaughlin, S.; Walsh, M.

    1995-08-01

    Perennial prairie grasses offer many advantages to the developing biofuels industry. High yielding varieties of native prairie grasses such as switchgrass, which combine lower levels of nutrient demand, diverse geographical growing range, high net energy yields and high soil and water conservation potential indicate that these grasses could and should supplement annual row crops such as corn in developing alternative fuels markets. Favorable net energy returns, increased soil erosion prevention, and a geographically diverse land base that can incorporate energy grasses into conventional farm practices will provide direct benefits to local and regional farm economies and lead to accelerated commercialization of conversion technologies. Displacement of row crops with perennial grasses will have major agricultural, economic, sociologic and cross-market implications. Thus, perennial grass production for biofuels offers significant economic advantages to a national energy strategy which considers both agricultural and environmental issues.

  17. Impact of energy prices and cellulosic biomass supply on agriculture, energy, and the environment: An integrated modeling approach

    EPA Science Inventory

    The accelerated growth in biofuels markets has both created and reinforced linkages between agricultural and energy markets. This study investigates the dynamics in agricultural and biofuel markets under alternative price scenarios for both crude oil and natural gas. Two energy ...

  18. The Impact of Aerosols Generated from Biomass Burning, Dust Storms, and Volcanoes Upon the Earth's Radiative Energy Budget

    NASA Technical Reports Server (NTRS)

    Christopher, Sundar A.

    1997-01-01

    A new technique for detecting aerosols from biomass burning and dust is developed. The radiative forcing of aerosols is estimated over four major ecosystems in South America. A new smoke and fire detection scheme is developed for biomass burning aerosols over South America. Surface shortware irradiance calculations are developed in the presence of biomass burning aerosols during the SCAR-B experiment. This new approach utilizes ground based, aircraft, and satellite measurements.

  19. Energy recovery from municipal waste: a case study for a middle-sized Italian district.

    PubMed

    Giugliano, M; Grosso, M; Rigamonti, L

    2008-01-01

    This paper reports the main outcome of research to compare and assess the merits of alternative strategies for energy recovery from municipal solid waste downstream of material recovery for an Italian province. Strategies analysed are based on well-established combustion technologies available at the commercial scale in the Italian market in comparison with an innovative but not yet proven option of refuse derived fuel gasification and subsequent co-combustion of syngas in a combined cycle power plant. The comparison is made using mass and energy balances, environmental assessment and economic analysis. From an energetic point of view, the best strategy is the one based on the refuse derived fuel gasification, which, on the contrary, does not show interesting environmental results. In this perspective, the best results are from strategies based on a dedicated plant, particularly when unsorted residual waste collected downstream of material recovery is used. Finally, from an economic point of view, the strategy with gasification allows the highest revenues from the sale of energy. PMID:17368012

  20. Assessment Planning and Evaluation of Renewable Energy Resources: an Interactive Computer Assisted Procedure. [hydroelectricity, biomass, and windpower in the Pittsfield metropolitan region, Massachusetts

    NASA Technical Reports Server (NTRS)

    Aston, T. W.; Fabos, J. G.; Macdougall, E. B.

    1982-01-01

    Adaptation and derivation were used to develop a procedure for assessing the availability of renewable energy resources on the landscape while simultaneously accounting for the economic, legal, social, and environmental issues required. Done in a step-by-step fashion, the procedure can be used interactively at the computer terminals. Its application in determining the hydroelectricity, biomass, and windpower in a 40,000 acre study area of Western Massachusetts shows that: (1) three existing dam sites are physically capable of being retrofitted for hydropower; (2) each of three general areas has a mean annual windspeed exceeding 14 mph and is conductive to windpower; and (3) 20% of the total land area consists of prime agricultural biomass while 30% of the area is prime forest biomass land.

  1. Coal conversion and biomass conversion: Volume 1: Final report on USAID (Agency for International Development)/GOI (Government of India) Alternate Energy Resources and Development Program

    SciTech Connect

    Kulkarni, A.; Saluja, J.

    1987-06-30

    The United States Agency for International Development (AID), in joint collaboration with the Government of India (GOI), supported a research and development program in Alternate Energy Resources during the period March 1983 to June 1987. The primary emphasis of this program was to develop new and advanced coal and biomass conversion technologies for the efficient utilization of coal and biomass feedstocks in India. This final ''summary'' report is divided into two volumes. This Report, Volume I, covers the program overview and coal projects and Volume II summarizes the accomplishments of the biomass projects. The six projects selected in the area of coal were: Evaluation of the Freeboard Performance in a Fluidized-Bed Combustor; Scale-up of AFBC boilers; Rheology, Stability and Combustion of Coal-Water Slurries; Beneficiation of Fine Coal in Dense Medium Cyclones; Hot Gas Cleanup and Separation; and Cold Gas Cleanup and Separation.

  2. Where are ionic liquid strategies most suited in the pursuit of chemicals and energy from lignocellulosic biomass?

    PubMed

    Sun, Ning; Rodríguez, Héctor; Rahman, Mustafizur; Rogers, Robin D

    2011-02-01

    Certain ionic liquids have been shown to dissolve cellulose, other biopolymers, and even raw biomass under relatively mild conditions. This particular ability of some ionic liquids, accompanied by a series of concurrent advantages, enables the development of improved processing strategies for the manufacturing of a plethora of biopolymer-based advanced materials. The more recent discoveries of dissolution of lignocellulosic materials (e.g., wood) in ionic liquids, with at least partial separation of the major constituent biopolymers, suggest further paths towards the achievement of a truly sustainable chemical and energy economy based on the concept of a biorefinery which provides chemicals, materials, and energy. Nonetheless, questions remain about the use of ionic liquids and the advisability of introducing any new process which utilizes bulk synthetic chemicals which have to be made, disposed of, and prevented from entering the environment. In this article, we discuss our own journey from the discovery of the dissolution of cellulose in ionic liquids to the cusp of an enabling technology for a true biorefinery and consider some of the key questions which remain. PMID:21170465

  3. Anaerobic Digestion of Algae Biomass to Produce Energy during Wastewater Treatment.

    PubMed

    Peng, Shanshan; Colosi, Lisa M

    2016-01-01

    Water resource recovery facilities (WRRFs) are asked to improve both energy efficiency and nutrient removal efficacy. Integration of algaculture offers several potential synergies that could address these goals, including an opportunity to leverage anaerobic digestion at WRRFs. In this study, bench-scale experiments are used to measure methane yield during co-digestion of Scenedesmus dimorphus or mixed WRRF-grown algae with WRRF biosolids. The results indicate that normalized methane yield decreases with increasing algae content in a manner than can be reasonably well fit using linear regression (R(2) = 67%). It is thus possible to predict methane yield for any mixture of algae and biosolids based on the methane yield of the biosolids alone. Using revised methane yields, the energy return on investment of a typical WRRF increases from 0.53 (without algae) to 0.66 (with algae). Thus, algae-based wastewater treatment may hold promise for improving WRRF energy efficiency without compromising effluent quality. PMID:26803024

  4. Energy, Environmental, and Economic Analyses of Design Concepts for the Co-Production of Fuels and Chemicals with Electricity via Co-Gasification of Coal and Biomass

    SciTech Connect

    Eric Larson; Robert Williams; Thomas Kreutz; Ilkka Hannula; Andrea Lanzini; Guangjian Liu

    2012-03-11

    The overall objective of this project was to quantify the energy, environmental, and economic performance of industrial facilities that would coproduce electricity and transportation fuels or chemicals from a mixture of coal and biomass via co-gasification in a single pressurized, oxygen-blown, entrained-flow gasifier, with capture and storage of CO{sub 2} (CCS). The work sought to identify plant designs with promising (Nth plant) economics, superior environmental footprints, and the potential to be deployed at scale as a means for simultaneously achieving enhanced energy security and deep reductions in U.S. GHG emissions in the coming decades. Designs included systems using primarily already-commercialized component technologies, which may have the potential for near-term deployment at scale, as well as systems incorporating some advanced technologies at various stages of R&D. All of the coproduction designs have the common attribute of producing some electricity and also of capturing CO{sub 2} for storage. For each of the co-product pairs detailed process mass and energy simulations (using Aspen Plus software) were developed for a set of alternative process configurations, on the basis of which lifecycle greenhouse gas emissions, Nth plant economic performance, and other characteristics were evaluated for each configuration. In developing each set of process configurations, focused attention was given to understanding the influence of biomass input fraction and electricity output fraction. Self-consistent evaluations were also carried out for gasification-based reference systems producing only electricity from coal, including integrated gasification combined cycle (IGCC) and integrated gasification solid-oxide fuel cell (IGFC) systems. The reason biomass is considered as a co-feed with coal in cases when gasoline or olefins are co-produced with electricity is to help reduce lifecycle greenhouse gas (GHG) emissions for these systems. Storing biomass-derived CO

  5. Groundwater and geothermal: urban district heating applications

    SciTech Connect

    Mounts, R.; Frazier, A.; Wood, E.; Pyles, O.

    1982-01-01

    This report describes how several cities use groundwater and geothermal energy in district heating systems. It begins with groundwater, introducing the basic technology and techniques of development, and describing two case studies of cities with groundwater-based district heating systems. The second half of the report consists of three case studies of cities with district heating systems using higher temperature geothermal resources.

  6. High-Speed Pipeline Revs Up Biomass Analysis (Fact Sheet)

    SciTech Connect

    Not Available

    2011-02-01

    Researchers at the National Renewable Energy Laboratory (NREL) have developed a new biomass evaluation process that opens up research avenues into understanding and manipulating biomass recalcitrance.

  7. Economic and kinetic studies of the biological production of farm energy and chemicals from biomass

    NASA Astrophysics Data System (ADS)

    Gaddy, J. L.

    1981-08-01

    The technical and economic feasibility of producing farm energy from cellulosic residues is investigated. The system has the capacity to produce 1300 CF of biogas and 180 kwh per day, using four parallel batch anaerobic digesters which are agitated mechanically and heated with waste heat from the generator. This system utilizes native grasses as the raw material. Laboratory reactors are operated to determine the proper innoculation ratio for starting batch cultures with cellulosic raw materials. Procedures for startup and operation of batch digestion systems are presented. Energy and economic analyses of the operation of the test unit are performed. The fertilizer potential of anaerobic digester sludge (from agricultural residues) is determined. The feasibility of separating the stages of anaerobic digestion, the production of acetic and propionic acids by the microorganism Propionibacterium acidi-propionici, the production of methane from acid hydrolyzates, and the kinetics of the continuous digestion of corn stover are studied.

  8. Minimally refined biomass fuel

    DOEpatents

    Pearson, Richard K.; Hirschfeld, Tomas B.

    1984-01-01

    A minimally refined fluid composition, suitable as a fuel mixture and derived from biomass material, is comprised of one or more water-soluble carbohydrates such as sucrose, one or more alcohols having less than four carbons, and water. The carbohydrate provides the fuel source; water solubilizes the carbohydrates; and the alcohol aids in the combustion of the carbohydrate and reduces the vicosity of the carbohydrate/water solution. Because less energy is required to obtain the carbohydrate from the raw biomass than alcohol, an overall energy savings is realized compared to fuels employing alcohol as the primary fuel.

  9. Clean fuels from biomass

    NASA Technical Reports Server (NTRS)

    Hsu, Y.-Y.

    1976-01-01

    The paper discusses the U.S. resources to provide fuels from agricultural products, the present status of conversion technology of clean fuels from biomass, and a system study directed to determine the energy budget, and environmental and socioeconomic impacts. Conversion processes are discussed relative to pyrolysis and anaerobic fermentation. Pyrolysis breaks the cellulose molecules to smaller molecules under high temperature in the absence of oxygen, wheras anaerobic fermentation is used to convert biomass to methane by means of bacteria. Cost optimization and energy utilization are also discussed.

  10. New market potential: Torrefaction of Woody Biomass

    SciTech Connect

    Jaya Shankar Tumuluru; J. Richard Hess

    2015-07-01

    According to researchers in Idaho National Laboratory’s Bioenergy Program, torrefaction of woody biomass could reduce variability in biomass feedstock and enable development of a commodity-type product for green energy generation and usage.

  11. Biomass Resources for the Federal Sector

    SciTech Connect

    Not Available

    2005-08-01

    Biomass Resources for the Federal Sector is a fact sheet that explains how biomass resources can be incorporated into the federal sector, and also how they can provide opportunities to meet federal renewable energy goals.

  12. Biomass Resources for the Federal Sector

    SciTech Connect

    R. Robichaud; A. Crawley; and L. Poole: NREL

    2005-09-09

    Biomass Resources for the Federal Sector is a fact sheet that explains how biomass resources can be incorporated into the federal sector, and also how they can provide opportunities to meet federal renewable energy goals.

  13. Biomass Burning

    NASA Technical Reports Server (NTRS)

    Levine, Joel S.; Cofer, Wesley R., III; Pinto, Joseph P.

    1993-01-01

    Biomass burning may be the overwhelming regional or continental-scale source of methane (CH4) as in tropical Africa and a significant global source of CH4. Our best estimate of present methane emissions from biomass burning is about 51.9 Tg/yr, or 10% of the annual methane emissions to the atmosphere. Increased frequency of fires that may result as the Earth warms up may result in increases in this source of atmospheric methane.

  14. Solar Energy Research Institute Biomass Program. Quarterly technical report, fourth quarter, FY 1984

    SciTech Connect

    Corder, R.E.; Lowenstein, M.Z.; McIntosh, R.

    1984-10-01

    Highlights of progress made during the fourth quarter of 1984 are summarized. Research was performed in 3 subprograms: aquatic species; anaerobic digestion; and photo/biological hydrogen. In the aquatic species subprogram, investigators: completed evaluation of energy fixation relationship between growth and lipid accumulation (Chlorella SO1); completed evaluation of metabolic blockers to enhance lipid accumulation; determined long-term sustainable productivities for Platymonas in a shallow raceway system; completed evaluation of species screening procedure using Platymonas; issued LOI for collection of microalgae strains; and completed establishment of oleaginous microalgae collection. In the anaerobic digestion subprogram, investigators: completed research on causticized straw-manure mixutre (USDA); performed chemical analysis of different swine manure fractions (Missouri); and completed preliminary evaluation of the conversion of lignocellulosics to liquid fuels with hydrogen iodide and other reductants (SERI). In the photo/biological hydrogen subprogram, investigators: isolated and characterized 10 new strains of photosynthetic bacteria; completed characterization of chemical treatments of O/sub 2/ evolution from photosystem II preparations; and submitted two papers on algal hydrogenase. Separate abstracts have been prepared for each program for inclusion in the Energy Data Base. (DMC)

  15. Physical and thermochemical characterization of rice husk char as a potential biomass energy source.

    PubMed

    Maiti, S; Dey, S; Purakayastha, S; Ghosh, B

    2006-11-01

    The fixed bed pyrolysis of rice husk was studied under conventional conditions with the aim of determining the characteristics of the charcoal formed for its applicability as a solid fuel. Thermoanalytic methods were used to determine the kinetic parameters of its combustion. Palletisation using different binders and techniques to improve the time of sustained combustion of the char pallets were investigated. The optimum temperature for carbonization to obtain a char having moderately high heating value was found as 400 degrees C. For the active char combustion zone, the order of reaction was nearly 1, the activation energy 73.403 kJ/mol and the pre-exponential factor 4.97 x 10(4)min(-1). Addition of starch as a binder and 10% ferrous sulphate heptahydrate or sodium hypophosphite as an additive enhanced the ignitibility of the char pallets. PMID:16298126

  16. Intermediate pyrolysis of biomass energy pellets for producing sustainable liquid, gaseous and solid fuels.

    PubMed

    Yang, Y; Brammer, J G; Mahmood, A S N; Hornung, A

    2014-10-01

    This work describes the use of intermediate pyrolysis system to produce liquid, gaseous and solid fuels from pelletised wood and barley straw feedstock. Experiments were conducted in a pilot-scale system and all products were collected and analysed. The liquid products were separated into an aqueous phase and an organic phase (pyrolysis oil) under gravity. The oil yields were 34.1 wt.% and 12.0 wt.% for wood and barley straw, respectively. Analysis found that both oils were rich in heterocyclic and phenolic compounds and have heating values over 24 MJ/kg. The yields of char for both feedstocks were found to be about 30 wt.%, with heating values similar to that of typical sub-bituminous class coal. Gas yields were calculated to be approximately 20 wt.%. Studies showed that both gases had heating values similar to that of downdraft gasification producer gas. Analysis on product energy yields indicated the process efficiency was about 75%. PMID:25088312

  17. Sustainable Biomass Supply Systems

    SciTech Connect

    Erin Searcy; Dave Muth; Erin Wilkerson; Shahab Sokansanj; Bryan Jenkins; Peter Titman; Nathan Parker; Quinn Hart; Richard Nelson

    2009-04-01

    The U.S. Department of Energy (DOE) aims to displace 30% of the 2004 gasoline use (60 billion gal/yr) with biofuels by 2030 as outlined in the Energy Independence and Security Act of 2007, which will require 700 million tons of biomass to be sustainably delivered to biorefineries annually. Lignocellulosic biomass will make an important contribution towards meeting DOE’s ethanol production goals. For the biofuels industry to be an economically viable enterprise, the feedstock supply system (i.e., moving the biomass from the field to the refinery) cannot contribute more that 30% of the total cost of the biofuel production. The Idaho National Laboratory in collaboration with Oak Ridge National Laboratory, University of California, Davis and Kansas State University are developing a set of tools for identifying economical, sustainable feedstocks on a regional basis based on biorefinery siting.

  18. Energy farming in Brazil: the role of agroforestry on the production of food and energy from biomass in southeast Bahia

    SciTech Connect

    Alvim, R.

    1983-01-01

    This paper analyzes the problem of fuel production from plants, on the basis of information drawn from the literature and from case studies conducted in Brazil. Special reference is made to the production of charcoal and the production of alcohol and vegetable oils to replace gasoline and diesel fuel. The potential and socioeconomic implications of energy farming are discussed. Diversified plant communities are more stable than monocropping systems in terms of prevention of soil degradation by erosion and leaching, and consequently agroforestry is the safest and the most attractive system for the combined production of food and energy from plants in the humid tropics. Agroforestry is especially interesting in the establishment of perennial energy crops, because it provides earlier cash returns.

  19. An in vitro evaluation of some unconventional ruminant feeds in terms of the organic matter digestibility, energy and microbial biomass.

    PubMed

    Al-Masri, M R

    2003-04-01

    In vitro organic matter apparent digestibility (IVOMAD), true digestibility (IVOMTD), metabolizable energy (ME), net energy lactation (NEL), microbial nitrogen (MN) and synthesis of microbial biomass (MBM) were estimated to predict the nutritive values of some agricultural by-products, drought-tolerant range plants and browses. The relationships between in vitro gas production (GP), and true or apparent digestibility. MN and MBM were studied utilizing an in vitro incubation technique. The values of IVOMAD, IVOMTD, ME, NEL, GP, MBM and MN varied with the studied experimental materials. The true fermentation of the outside part of Atriplex leucoclada produced a higher volume of gas than the middle or the inside parts, and this was associated with an increase in the values of IVOMAD, IVOMTD, ME and NEL. However, screening off the wood from olive cake to obtain olive cake pulp increased the IVOMAD, IVOMTD, ME, NEL and the volume of gas production from the true fermented material. One ml of gas was generated from the true degradation of 5 mg of wheat straw, Moringa oleifera, Alhagi camelorum, Eucaliptus camaldulensis and A. leucoclada, from 11 mg of Prosopsis stephaniana and olive cake pulp, and from 20 mg of olive cake or olive cake wood. The amount of MN or MBM produced from 100 mg of truly fermented organic matter depended on the kind of the fermented material and amounted to 0.7-2.9 mg or 8-34 mg, respectively. Crude fibre was negatively correlated to IVOMAD, IVOMTD, ME and NEL. Gas production was positively correlated to IVOMAD and IVOMTD but negatively correlated to MBM and MN. PMID:12735706

  20. Charter School Districts.

    ERIC Educational Resources Information Center

    Hill, Paul T.

    2002-01-01

    Discusses the difference between charter schools and charter districts (all schools in the district are chartered), why charter school districts are spreading, and how local school districts can become charter districts. Current laws in Arizona, California, Florida, Georgia, New Mexico, Oregon, and Texas allow charter districts. (PKP)

  1. Geothermal district heating systems

    NASA Astrophysics Data System (ADS)

    Budney, G. S.; Childs, F.

    1982-06-01

    Ten district heating demonstration projects and their present status are described. The projects are Klamath County YMCA, Susanville District Heating, Klamath Falls District Heating, Reno Salem Plaza Condominium, El Centro Community Center Heating/Cooling, Haakon School and Business District Heating, St. Mary's Hospital, Diamond Ring Ranch, Pagosa Springs District Heating, and Boise District Heating.

  2. Integrating the Technosocial Dimensions of Food and Biomass Energy Systems under Climate Change

    NASA Astrophysics Data System (ADS)

    Izaurralde, R. C.; Malone, E. L.; Thomson, A. M.; Morgan, L. G.; Kim, S. H.

    2008-12-01

    The increasing complexity of global-change issues calls for both interdisciplinary approaches and modeling tools able to integrate information across different knowledge domains (environment, food security, climate change, social conditions, technology, and national security). Here we use results from three models (the integrated assessment model MiniCAM, the biophysical model EPIC, and the vulnerability model VRIM) as well as other physical and social data to develop a model prototype in STELLA® for evaluating issues of food and biofuel production, land competition, population growth, and nutrition. Our initial focus is on the Indian subcontinent (India, Pakistan, and Bangladesh), a rapid developing region with recognized issues with regards to vulnerability to climate change, environmental conditions, food production and nutrition, energy production, and national security. The model prototype for India consists of three major domains: land and crop production, food and biofuels production, and population growth and nutrition. FAO and UNDP data are to used to develop the historical background while profit indices and nutrition status are used to examine land use competition and food policies.

  3. The Goals and Research of the BioEnergy Sciences Center (BESC): Developing Cost-effective and Sustainable Means of Producing Biofuels by Overcoming Biomass Recalcitrance

    SciTech Connect

    Fowler, Suzy

    2009-01-01

    The mission of BioEnergy Sciences Center is to understand and overcome the recalcitrance of biomass to conversion by modifying plant cell walls with improved biocatalysts. The papers in this volume are from the plant transformation and the biomass characterization areas, and showcase the multidisciplinary and multi-institutional nature of the center. The challenge of converting cellulosic biomass to accessible sugars is the dominant obstacle to cost-effective production of biofuels in sustained quantities capable of impacting U.S. consumption of fossil transportation fuels. This was affirmed in a Biomass to Biofuels Workshop report, 'Breaking the Barriers to Cellulosic Ethanol' (DOE/SC-0095, 2006). The potential beneficial economic impact of addressing the difficulty of accessing biomass sugars was explained by Lynd et al. [1]. The BioEnergy Science Center (BESC) research project addresses this challenge with an unprecedented interdisciplinary effort focused on overcoming the recalcitrance of biomass. The 5-year mission of BESC is to make revolutionary advances in understanding and overcoming the recalcitrance of biomass to conversion into sugars, making it feasible to displace imported petroleum with ethanol and other fuels. BESC will combine plant cell walls engineered to reduce recalcitrance with new biocatalysts to improve deconstruction. These breakthroughs will be realized with a systems biology approach and new high-throughput analytical and computational technologies to achieve: (1) targeted modification of plant cell walls to reduce their recalcitrance (using Populus and switchgrass as high-impact bioenergy feedstocks), thereby, decreasing or eliminating the need for costly chemical pretreatment; and (2) consolidated bioprocessing, which involves the use of a single microorganism or microbial consortium to overcome biomass recalcitrance through single-step conversion of biomass to biofuels. We will greatly enhance our understanding of cell wall structure

  4. Energy balances in the production and end use of alcohols derived from biomass. A fuels-specific comparative analysis of alternate ethanol production cycles

    NASA Astrophysics Data System (ADS)

    1980-10-01

    Questions of net gains in premium fuels that can be derived from the production and use of ethanol from biomass, and that for the US alcohol fuel program, energy balance need not be a concern. Three categories of fuel gain are discussed in the report: (1) net petroleum gain; (2) net premium fuel gain (petroleum and natural gas); and (3) net energy gain (for all fuels). In this study the investment of energy (in the form of premium fuels) in alcohol production includes all investment from cultivating, harvesting, or gathering the feedstock and raw materials, through conversion of the feedstock to alcohol, to the delivery to the end user.

  5. Health and environmental research. Quarterly report, October 1-December 31, 1981. [Health and environmental effects of waste and biomass to energy processes

    SciTech Connect

    Not Available

    1982-04-01

    Progress on the following studies is summarized: health and environmental impact of waste and biomass to energy processes; characterization of organic pollutants; environmental effects of using municipal solid wastes as a supplementary fuel; microbiological air quality of the Ames Municipal Solid Waste Recovery System; solid waste to methane study; high resolution luminescence spectroscopy (x-ray laser excited Shpol'skii spectroscopy, rotationally cooled fluorescence spectroscopy, and fluorescence line narrowing spectroscopy); lead mission-environmental aspects of energy recovery from waste and biomass; risk assessment of municipal wastes as a supplemental fuel. An executive summary of a report on the health and environmental effects of refuse-derived fuel production and coal co-firing technologies is also included. (JGB)

  6. Growing perennial forages for biomass

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Recent attention given to converting biomass into ethanol to fuel cars and trucks or burning it to generate electricity has captured society’s interest. There are three main routes for converting biomass into usable forms of energy or other chemical end products: (i) biochemical, (ii) thermochemical...

  7. Biomass Production and Soil Carbon

    Technology Transfer Automated Retrieval System (TEKTRAN)

    There is expanding interest in harvesting crop biomass for energy. Crop biomass such as corn stover, wheat straw, soybean straw or other crop straws can be used as feedstock to support several bioenergy platforms (cellulosic ethanol, gasification or pyrolysis). There are potential benefits for using...

  8. Advanced system demonstration for utilization of biomass as an energy source. Volume 1: Scope and design criteria and project summary

    NASA Astrophysics Data System (ADS)

    1980-10-01

    A generic design is presented for biomass conversion facilities located anywhere biomass is abundant. The plant, its concept of operation, and other overall information are described. The capital cost estimate for the plant, and the basis upon which it was obtained are given; a schedule of key milestones and activities required to construct the plant and put it into operation is presented; and the general findings in areas that affect the viability of the project are discussed. The technical design, biomass study, environmental impact, commercialization, and economic factors are addressed. Each major plant area and its equipment and facilities are discussed as well as noise control, reliability, maintainability, and safety. The results of studies relating to alternatives considered for optimizing plant operation parameters and specific system process schemes are presented. All economic factors that affect the feasibility and viability of the biomass project are defined and evaluated.

  9. Novel Biomass Conversion Process Results in Commercial Joint Venture; The Spectrum of Clean Energy Innovation (Fact Sheet)

    SciTech Connect

    Not Available

    2010-06-01

    Fact sheet describing DuPont/NREL cooperative research and development agreement that resulted in biomass-to-ethanol conversion process used as a basis for DuPont Danisco Cellulosic Ethanol, LLC and cellulosic ethanol demonstration plant.

  10. Fuels from biomass and wastes

    NASA Astrophysics Data System (ADS)

    Klass, D. L.; Emert, G. H.

    The production, use, and effects of fuels from biomass and waste energy sources are discussed. Biomass procurement from silviculture, including hybrid poplar and sycamore farms, in addition to the growth of mass algal culture and Jerusalem artichokes for fuels are considered. The conversion of biomass and solid waste materials through biological and thermal gasification, hydrolysis and extraction, and fermentation to produce ethanol, along with natural and thermal liquefaction processes involving euphorbia lathyris and cellulosic materials are elaborated. Environmental and health aspects of biomass and waste conversion systems are outlined, noting the large land surface areas needed for significant contributions to total demands from biomass, specific instances and case studies are reviewed for biomass use in Indiana, the Dominican Republic, the southeast U.S., and in small wood stoves.

  11. Application of sugar maple and black locust to the biomass/energy-plantation concept. Annual report, March 1, 1981-February 28, 1982

    SciTech Connect

    Sajdak, R.L.

    1982-03-01

    The purpose of this research program is to determine the feasibility of converting existing pole-size maple stands to biomass/energy plantations using black locust as an interplanted species. Methods to quantify biomass production in northern hardwood stands have been refined and additional sites have been sampled. Hardwood sprout biomass production was shown to be greatly affected by site, fertilizer treatment, and tree species. Screening of black locust Rhizobium strains for acid tolerance has been completed. Seven strains have been found to be tolerant of both high aluminum and low pH conditions. A greenhouse and outplanting study testing the competitiveness and nitrogen-fixing ability of these strains under forest conditions has begun. Second year results of black locust provenance testing has shown frost hardiness variation among trees to be greater than among sources. Consequently, present work is now concentrated on propagating northern locust sources vegetatively. Biomass characterization of young northern hardwood sprouts by chemical and thermal analysis is complete.

  12. Biomass Feedstock Composition and Property Database

    DOE Data Explorer

    The Office of Energy Efficiency and Renewable Energy's Biomass Program works with industry, academia and national laboratory partners on a balanced portfolio of research in biomass feedstocks and conversion technologies. Through research, development, and demonstration efforts geared at the development of integrated biorefineries, the Biomass Program is helping transform the nation's renewable and abundant biomass resources into cost competitive, high performance biofuels, bioproducts, and biopower.(From the Biomass Program's home page at http://www1.eere.energy.gov/biomass/) The Biomass Feedstock Composition and Property Database allows the user to choose from more than 150 types of biomass samples. The specialized interface then guides the user through choices within the sample (such as "Ash" as a choice in the "Hardwood" sample and displays tables based on choice of composition properties, structure properties, elemental properties, extractive properties, etc.)

  13. A global conversation about energy from biomass: the continental conventions of the global sustainable bioenergy project

    PubMed Central

    Lynd, Lee Rybeck; Aziz, Ramlan Abdul; de Brito Cruz, Carlos Henrique; Chimphango, Annie Fabian Abel; Cortez, Luis Augusto Barbosa; Faaij, Andre; Greene, Nathanael; Keller, Martin; Osseweijer, Patricia; Richard, Tom L.; Sheehan, John; Chugh, Archana; van der Wielen, Luuk; Woods, Jeremy; van Zyl, Willem Heber

    2011-01-01

    The global sustainable bioenergy (GSB) project was formed in 2009 with the goal of providing guidance with respect to the feasibility and desirability of sustainable, bioenergy-intensive futures. Stage 1 of this project held conventions with a largely common format on each of the world's continents, was completed in 2010, and is described in this paper. Attended by over 400 persons, the five continental conventions featured presentations, breakout sessions, and drafting of resolutions that were unanimously passed by attendees. The resolutions highlight the potential of bioenergy to make a large energy supply contribution while honouring other priorities, acknowledge the breadth and complexity of bioenergy applications as well as the need to take a systemic approach, and attest to substantial intra- and inter-continental diversity with respect to needs, opportunities, constraints and current practice relevant to bioenergy. The following interim recommendations based on stage 1 GSB activities are offered: — Realize that it may be more productive, and also more correct, to view the seemingly divergent assessments of bioenergy as answers to two different questions rather than the same question. Viewed in this light, there is considerably more scope for reconciliation than might first be apparent, and it is possible to be informed rather than paralysed by divergent assessments.— Develop established and advanced bioenergy technologies such that each contributes to the other's success. That is, support and deploy in the near-term meritorious, established technologies in ways that enhance rather than impede deployment of advanced technologies, and support and deploy advanced technologies in ways that expand rather than contract opportunities for early adopters and investors.— Be clear in formulating policies what mix of objectives are being targeted, measure the results of these policies against these objectives and beware of unintended consequences

  14. Micro-Cogeneration Incl. The Conversion of Chemical Energy of Biomass to Electric Energy and the Low Potential Heat

    NASA Astrophysics Data System (ADS)

    Huzvar, Jozef; Kapjor, Andrej

    2011-06-01

    This article deals with combined production of heat and electricity for small premises, such as households, where energy consumption is around few kilowatts. This proposal of micro co-generation unit uses as a heat source an automatic burner for combustion of wood pellets. Construction of an equipment for the heat transport can be designed using different basic ways of heat transfer. Electricity is produced by the two-stroke steam engine and the generator.

  15. The role of natural resource and environmental economics in determining the trade-offs in consumption and production of energy inputs: The case of biomass energy crops

    SciTech Connect

    Downing, M.; Graham, R.L.

    1993-12-31

    Natural resource economics issues deal with flows and funds of renewable and nonrenewable resources over time. These issues include topics concerned with management of fisheries, forests, mineral, energy resources, the extinction of species and the irreversibility of development over time. Environmental economics issues deal with regulation of polluting activities and the valuation of environmental amenities. In this study we outline a framework for studying both natural resource and environmental economics issues for any renewable or nonrenewable resource. Valuation from both the cost and benefit sides are addressed as they relate to the valuation of environmental programs or policies. By using this top-down approach to analyze and determine the costs and benefits of using renewable or nonrenewable resources, policy-makers on the global, national and local scales may be better informed as to the probable nonmarket and market ramifications of their natural resource and environmental policy decisions. This general framework for analysis is then focused to address biomass energy crops and their usage as inputs to energy production. As with any energy technology, a complete analysis must include an examination of the entire fuel cycle; specifically both production and consumption sides. From a production standpoint, market valuation issues such as crop management techniques, inputs to production, and community economics issues must be addressed as well as nonmarket valuation issues such as soil erosion, ground water effects and carbon sequestration. On the consumption side, market valuation considerations such as energy fuel efficiency and quality, cost of conversion and employment of labor are important factors while the critical nonmarket valuation factors are ambient air visibility, greenhouse gas release, and disposal of the by-products of conversion and combustion.

  16. Biomass Program Factsheet

    SciTech Connect

    2010-03-01

    The emerging U.S. bioindustry is using a range of biomass resources to provide a secure and growing supply of transportation fuels and electric power. Displacing an increasing portion of our imported oil with renewable, domestic bioenergy will provide clear benefits:Reduced greenhouse gas (GHG) emissions; A cleaner, more secure energy future; Sustainable transportation fuels; Opportunities for economic growth

  17. 78 FR 37538 - Idaho Irrigation District; New Sweden Irrigation District; Notice of Preliminary Permit...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-21

    ... Energy Regulatory Commission Idaho Irrigation District; New Sweden Irrigation District; Notice of... Competing Applications On April 19, 2013, the Idaho and New Sweden Irrigation Districts, filed a joint... maintaining irrigation flows; (4) a powerhouse containing a 1.2- megawatt (MW) Kaplan turbine; (5) a...

  18. Biomass production in Florida

    SciTech Connect

    Smith, W.H.; Dowd, M.L.

    1981-08-01

    Florida posseses climatic, land, and water resources favorable for abundant biomass production. Therefore, a statewide program has been initiated to determine adapted species for the available array of production sites. Plant resources under investigation include woody, aquatic, grasses, hydrocarbon, and root crop species. The goal is to produce a continuous stream of biomass for the various biofuel conversion options. Preliminary yields from energy cropping experiments range from about 10 to nearly 90 metric tons per hectare per year, depending on the crop and the production systems employed. (Refs. 15).

  19. Effectiveness of the Solar Panels in the Castro Valley Unified School District Based on Projected Amount of Energy to be Produced

    NASA Astrophysics Data System (ADS)

    Sparks, J. R.; Palmer, T. C.; Siegel, A. P.

    2014-12-01

    In recent years Americans have warmed to the idea of installing solar panels to their homes and businesses. These panels help reduce the cost of receiving energy from power plants that lose a lot of energy in transportation. These power plants provide energy by burning gas or coal producing emissions that add to the growing problem of pollution and global warming. In 2010 the Castro Valley Unified School District decided to add solar panels to Canyon Middle School, Castro Valley High School, and Castro Valley Adult School. We researched whether the solar panels reached their projected amount of energy (74%) for the sites where the panels were placed. The solar panels at all three sites were found to exceed these projected amounts. The solar panels at each site produce a little over 74% for the each school.

  20. Energy balances in the production and end use of alcohols derived from biomass. A fuels-specific comparative analysis of alternate ethanol production cycles

    SciTech Connect

    Not Available

    1980-10-01

    Considerable public interest and debate have been focused on the so-called energy balance issue involved in the conversion of biomass materials into ethanol for fuel use. This report addresses questions of net gains in premium fuels that can be derived from the production and use of ethanol from biomass, and shows that for the US alcohol fuel program, energy balance need not be a concern. Three categories of fuel gain are discussed in the report: (1) Net petroleum gain; (2) Net premium fuel gain (petroleum and natural gas); and (3) Net energy gain (for all fuels). In this study the investment of energy (in the form of premium fuels) in alcohol production includes all investment from cultivating, harvesting, or gathering the feedstock and raw materials, through conversion of the feedstock to alcohol, to the delivery to the end-user. To determine the fuel gains in ethanol production, six cases, encompassing three feedstocks, five process fuels, and three process variations, have been examined. For each case, two end-uses (automotive fuel use and replacement of petrochemical feedstocks) were scrutinized. The end-uses were further divided into three variations in fuel economy and two different routes for production of ethanol from petrochemicals. Energy requirements calculated for the six process cycles accounted for fuels used directly and indirectly in all stages of alcohol production, from agriculture through distribution of product to the end-user. Energy credits were computed for byproducts according to the most appropriate current use.

  1. Combustion of Micropowdered Biomass

    NASA Astrophysics Data System (ADS)

    Geil, Ethan; Thorne, Robert

    2009-03-01

    Combustion of finely powdered biomass has the potential to replace heating oil, which accounts for a significant fraction of US oil consumption, in heating, cooling and local power generation applications. When ground to 30-150 micron powders and dispersed in air, wood and other biomass can undergo deflagrating combustion, as occurs with gaseous and dispersed liquid fuels. Combustion is very nearly complete, and in contrast to sugar/starch or cellulose-derived ethanol, nearly all of the available plant mass is converted to usable energy so the economics are much more promising. We are exploring the fundamental combustion science of biomass powders in this size range. In particular, we are examining how powder size, powder composition (including the fraction of volatile organics) and other parameters affect the combustion regime and the combustion products.

  2. SERI Biomass Program

    NASA Astrophysics Data System (ADS)

    Bergeron, P. W.; Corder, R. E.; Hill, A. M.; Lindsey, H.; Lowenstein, M. Z.

    1983-02-01

    The biomass with which this report is concerned includes aquatic plants, which can be converted into liquid fuels and chemicals; organic wastes (crop residues as well as animal and municipal wastes), from which biogas can be produced via anerobic digestion; and organic or inorganic waste streams, from which hydrogen can be produced by photobiological processes. The Biomass Program Office supports research in three areas which, although distinct, all use living organisms to create the desired products. The Aquatic Species Program (ASP) supports research on organisms that are themselves processed into the final products, while the Anaerobic Digestion (ADP) and Photo/Biological Hydrogen Program (P/BHP) deals with organisms that transform waste streams into energy products. The P/BHP is also investigating systems using water as a feedstock and cell-free systems which do not utilize living organisms. This report summarizes the progress and research accomplishments of the SERI Biomass Program during FY 1982.

  3. Small-scale biomass gasifiers for heat and power: A global review. World Bank technical paper energy series

    SciTech Connect

    Stassen, H.E.

    1995-12-31

    The report begins by explaining the revival and worldwide interest in biomass gasification for developing countries during the 1970s and 1980s as well as the rationale for the monitoring program. It continues, in chapter 2, by discussing the technical, commercial, economic, pollution, health, and safety aspects of biomass gasification technology. The methods used by the BGMP, the gasifiers monitored, and the results of the monitoring are described in chapter 3. The performance aspects of the technology, as revealed by the BGMP data, are discussed and analyzed in chapter 4; the BGMP data are also compared with the equipment manufacturers` specifications. Insights on the costs and economics of the use of biomass gasifiers in developing countries are provided in the following chapter. The report summaries the project`s conclusions about the value added by biomass gasifiers, costs and economics of gasification, and availability and reliability of gasification equipment in chapter 6. A final chapter contains a checklist, including background information, that could serve as a quick evaluation instrument for assessing the viability and applicability of proposed biomass gasifier projects.

  4. Advanced system demonstration for utilization of biomass as an energy source. Volume I. Scope and design criteria and project summary

    SciTech Connect

    1980-10-01

    The information in this document is the result of an intensive engineering effort to demonstrate the feasibility of biomass-fueled boilers in cogeneration applications. This design package is based upon a specific site in the State of Maine. However, the design is generic in nature and could serve as a model for other biomass conversion facilities located anywhere biomass is abundant. The project's purpose and summary information are presented: the plant, its concept of operation; and other overall information are described. The capital cost estimate for the plant, and the basis upon which it was obtained are given; a schedule of key milestones and activities required to construct the plant and put it into operation is presented; and the general findings in areas that affect the viability of the project are discussed. The technical design, biomass study, environmental impact, commercialization, and economic factors are addressed. Each major plant area and the equipment and facilities that each includes are discussed in depth. Some overall plant requirements, including noise control, reliability, maintainability, and safety, are detailed. The results of each study relating to alternatives considered for optimizing plant operation parameters and specific system process schemes are briefly presented. All economic factors that affect the feasibility and viability of the biomass project are defined and evaluated.

  5. Energy exchanges in a Central Business District - Interpretation of Eddy Covariance and radiation flux measurements (London UK)

    NASA Astrophysics Data System (ADS)

    Kotthaus, S.; Grimmond, S.

    2013-12-01

    Global urbanisation brings increasingly dense and complex urban structures. To manage cities sustainably and smartly, currently and into the future under changing climates, urban climate research needs to advance in areas such as Central Business Districts (CBD) where human interactions with the environment are particularly concentrated. Measurement and modelling approaches may be pushed to their limits in dense urban settings, but if urban climate research is to contribute to the challenges of real cities those limits have to be addressed. The climate of cities is strongly governed by surface-atmosphere exchanges of energy, moisture and momentum. Observations of the relevant fluxes provide important information for improvement and evaluation of modelling approaches. Due to the CBD's heterogeneity, a very careful analysis of observations is required to understand the relevant processes. Current approaches used to interpret observations and set them in a wider context may need to be adapted for use in these more complex areas. Here, we present long-term observations of the radiation balance components and turbulent fluxes of latent heat, sensible heat and momentum in the city centre of London. This is one of the first measurement studies in a CBD covering multiple years with analysis at temporal scales from days to seasons. Data gathered at two sites in close vicinity, but with different measurement heights, are analysed to investigate the influence of source area characteristics on long-term radiation and turbulent fluxes. Challenges of source area modelling and the critical aspect of siting in such a complex environment are considered. Outgoing long- and short-wave radiation are impacted by the anisotropic nature of the urban surface and the high reflectance materials increasingly being used as building materials. Results highlight the need to consider the source area of radiometers in terms of diffuse and direct irradiance. Sensible heat fluxes (QH) are positive

  6. Overview of IEA biomass combustion activities

    NASA Astrophysics Data System (ADS)

    Hustad, J. E.

    1994-07-01

    The objectives of the International Energy Agency (IEA) bioenergy program are: (1) to encourage cooperative research, development and use of energy and the increased utilization of alternatives to oil; and (2) to establish increased program and project cooperation between participants in the whole field of bioenergy. There are four Task Annexes to the Implementing Agreement during the period 1992-1994: Efficient and Environmentally Sound Biomass Production Systems; Harvesting and Supply of Woody Biomass for Energy; Biomass Utilization; and Conversion of Municipal Solid Waste Feedstock to Energy. The report describes the following biomass combustion activities during the period 1992-1994: Round robin test of a wood stove; Emissions from biomass combustion; A pilot project cofiring biomass with oil to reduce SO2 emissions; Small scale biomass chip handling; Energy from contaminated wood waste combustion; Modeling of biomass combustion; Wood chip cogeneration; Combustion of wet biomass feedstocks, ash reinjection and carbon burnout; Oxidation of wet biomass; Catalytic combustion in small wood burning appliances; Characterization of biomass fuels and ashes; Measurement techniques (FTIR).

  7. Oversight: biomass. Hearing before the Subcommittee on Energy Development and Applications of the Committee on Science and Technology, US House of Representatives, Ninety-Sixth Congress, Second Session, March 10, 1980

    SciTech Connect

    Not Available

    1980-01-01

    Testimony from a number of public witnesses concerning various biomass-production systems that facilitate the forest and agricultural lands for energy crops and conversion technologies that convert biomass to gaseous and liquid fuels was presented. Biomass will make a significant contribution to the administration's goal of 20% solar by the year 2000. The Department of Energy's budget calls for a $13 million reduction in biomass gasification which is the preliminary step in the production of methanol. Witnesses were asked to comment on that reduction. What it will take to convert less-expensive cellulosic feedstocks into ethanol for blending into gasohol and efforts to accelerate the use of wood for near-term contributions are also discussed. The possibility of increased use of forest and agricultural lands for producing energy-related crops and the program to develop hydrocarbon from palm trees and alcohol from cassava and sugar are also examined. (MCW)

  8. Oversight: biomass. Hearing before the Subcommittee on Energy Development and Applications of the Committee on Science and Technology, US House of Representatives, Ninety-sixth Congress, Second Session, March 10, 1980

    SciTech Connect

    Not Available

    1980-01-01

    Testimony from a number of public witnesses concerning various biomass-production systems that facilitate the forest and agricultural lands for energy crops and conversion technologies that convert biomass to gaseous and liquid fuels was presented. Biomass will make a significant contribution to the administration's goal of 20% solar by the year 2000. The Department of Energy's budget calls for a $13 million reduction in biomass gasification which is the preliminary step in the production of methanol. Witnesses were asked to comment on that reduction. What it will take to convert less-expensive cellulosic feedstocks into ethanol for blending into gasohol and efforts to accelerate the use of wood for near-term contributions are also discussed. The possibility of increased use of forest and agricultural lands for producing energy-related crops and the program to develop hydrocarbon from palm trees and alcohol from cassava and sugar are also examined.

  9. Biomass shock pretreatment

    DOEpatents

    Holtzapple, Mark T.; Madison, Maxine Jones; Ramirez, Rocio Sierra; Deimund, Mark A.; Falls, Matthew; Dunkelman, John J.

    2014-07-01

    Methods and apparatus for treating biomass that may include introducing a biomass to a chamber; exposing the biomass in the chamber to a shock event to produce a shocked biomass; and transferring the shocked biomass from the chamber. In some aspects, the method may include pretreating the biomass with a chemical before introducing the biomass to the chamber and/or after transferring shocked biomass from the chamber.

  10. A process for energy-efficient high-solids fed-batch enzymatic liquefaction of cellulosic biomass.

    PubMed

    Cardona, M J; Tozzi, E J; Karuna, N; Jeoh, T; Powell, R L; McCarthy, M J

    2015-12-01

    The enzymatic hydrolysis of cellulosic biomass is a key step in the biochemical production of fuels and chemicals. Economically feasible large-scale implementation of the process requires operation at high solids loadings, i.e., biomass concentrations >15% (w/w). At increasing solids loadings, however, biomass forms a high viscosity slurry that becomes increasingly challenging to mix and severely mass transfer limited, which limits further addition of solids. To overcome these limitations, we developed a fed-batch process controlled by the yield stress and its changes during liquefaction of the reaction mixture. The process control relies on an in-line, non-invasive magnetic resonance imaging (MRI) rheometer to monitor real-time evolution of yield stress during liquefaction. Additionally, we demonstrate that timing of enzyme addition relative to biomass addition influences process efficiency, and the upper limit of solids loading is ultimately limited by end-product inhibition as soluble glucose and cellobiose accumulate in the liquid phase. PMID:26432053

  11. Densified biomass can cost-effectively mitigate greenhouse gas emissions and address energy security in thermal applications

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Determining the life cycle greenhouse gas benefits of biofuels has been critical for quantifying their potential for meeting governmental mitigation targets. Little work has been conducted to determine the life cycle greenhouse gas benefits of using biomass for heat or power generation, even though ...

  12. YEAR 2 BIOMASS UTILIZATION

    SciTech Connect

    Christopher J. Zygarlicke

    2004-11-01

    This Energy & Environmental Research Center (EERC) Year 2 Biomass Utilization Final Technical Report summarizes multiple projects in biopower or bioenergy, transportation biofuels, and bioproducts. A prototype of a novel advanced power system, termed the high-temperature air furnace (HITAF), was tested for performance while converting biomass and coal blends to energy. Three biomass fuels--wood residue or hog fuel, corn stover, and switchgrass--and Wyoming subbituminous coal were acquired for combustion tests in the 3-million-Btu/hr system. Blend levels were 20% biomass--80% coal on a heat basis. Hog fuel was prepared for the upcoming combustion test by air-drying and processing through a hammer mill and screen. A K-Tron biomass feeder capable of operating in both gravimetric and volumetric modes was selected as the HITAF feed system. Two oxide dispersion-strengthened (ODS) alloys that would be used in the HITAF high-temperature heat exchanger were tested for slag corrosion rates. An alumina layer formed on one particular alloy, which was more corrosion-resistant than a chromia layer that formed on the other alloy. Research activities were completed in the development of an atmospheric pressure, fluidized-bed pyrolysis-type system called the controlled spontaneous reactor (CSR), which is used to process and condition biomass. Tree trimmings were physically and chemically altered by the CSR process, resulting in a fuel that was very suitable for feeding into a coal combustion or gasification system with little or no feed system modifications required. Experimental procedures were successful for producing hydrogen from biomass using the bacteria Thermotoga, a deep-ocean thermal vent organism. Analytical procedures for hydrogen were evaluated, a gas chromatography (GC) method was derived for measuring hydrogen yields, and adaptation culturing and protocols for mutagenesis were initiated to better develop strains that can use biomass cellulose. Fly ash derived from

  13. Evaluation of the potential for using old-field vegetation as an energy feedstock: Biomass yield, chemical composition, environmental concerns, and economics

    SciTech Connect

    Johnston, J.W. Jr.

    1990-07-01

    The major focus of current research on production of biomass for use as energy feedstock involves selection of species and genotypes best suited for specific regions of the United States and development of crop management techniques that maximize biomass productivity while minimizing environmental impacts and economic costs. The two experimental sites, and abandoned soybean field (AS) and an abandoned pasture (AP) were studied. At the AS site, the effects of two harvest frequencies (1 or 2 harvests annually), two nitrogen fertilizer treatments (1 or 2 harvests annually), two nitrogen fertilizer treatments (0 or 87 kg{center dot}ha{sup {minus}1}{center dot}yr{sup {minus}1}), and two phosphorous fertilizer treatments (0 or 111 kg{center dot}ha{sup {minus}1}{center dot}yr{sup {minus}1}) were determined. At the AP site, the effects of two harvest treatments (1 or 2 harvests annually), two fertilizer treatments (56:56:135 kg of N:P:K{center dot}ha{sup {minus}1}{center dot}yr{sup {minus}1}), and two lime treatments (0 or 4600 kg{center dot}ha{sup {minus}1}{center dot}yr{sup {minus}1}) were determined. At both sites, treatments were arranged in a randomized complete block 2 {times} 2 {times} 2 factorial experiment. The results of this research indicated that old-field vegetation is: (1) sufficiently productive to provide significant quantities of energy feedstock; (2) chemically suitable as an energy feedstock; (3) environmentally benign with respect to impacts related to soil erosion and nutrient depletion; (4) relatively unresponsive to fertilizer and lime inputs; and (5) economically competitive with other biomass energy feedstock candidates. 38 refs., 8 figs., 68 tabs.

  14. A method for the assessment of site-specific economic impacts of commercial and industrial biomass energy facilities. A handbook and computer model

    SciTech Connect

    Not Available

    1994-10-01

    A handbook on ``A Method for the Assessment of Site-specific Econoomic Impacts of Industrial and Commercial Biomass Energy Facilities`` has been prepared by Resource Systems Group Inc. under contract to the Southeastern Regional Biomass Energy Program (SERBEP). The handbook includes a user-friendly Lotus 123 spreadsheet which calculates the economic impacts of biomass energy facilities. The analysis uses a hybrid approach, combining direct site-specific data provided by the user, with indirect impact multipliers from the US Forest Service IMPLAN input/output model for each state. Direct economic impacts are determined primarily from site-specific data and indirect impacts are determined from the IMPLAN multipliers. The economic impacts are given in terms of income, employment, and state and federal taxes generated directly by the specific facility and by the indirect economic activity associated with each project. A worksheet is provided which guides the user in identifying and entering the appropriate financial data on the plant to be evaluated. The WLAN multipliers for each state are included in a database within the program. The multipliers are applied automatically after the user has entered the site-specific data and the state in which the facility is located. Output from the analysis includes a summary of direct and indirect income, employment and taxes. Case studies of large and small wood energy facilities and an ethanol plant are provided as examples to demonstrate the method. Although the handbook and program are intended for use by those with no previous experience in economic impact analysis, suggestions are given for the more experienced user who may wish to modify the analysis techniques.

  15. Modelling of the District Heating System's Operation

    NASA Astrophysics Data System (ADS)

    Vigants, Girts; Blumberga, Dagnija; Vīgants, Ģirts; Blumberga, Dagnija

    2011-01-01

    The development of a district heating systems calculation model means improvement in the energy efficiency of a district heating system, which makes it possible to reduce the heat losses, thus positively affecting the tariffs on thermal energy. In this paper, a universal approach is considered, based on which the optimal flow and temperature conditions in a district heating system network could be calculated. The optimality is determined by the least operational costs. The developed calculation model has been tested on the Ludza district heating system based on the technical parameters of this system.

  16. Washington State biomass data book

    SciTech Connect

    Deshaye, J.A.; Kerstetter, J.D.

    1991-07-01

    This is the first edition of the Washington State Biomass Databook. It assess sources and approximate costs of biomass fuels, presents a view of current users, identifies potential users in the public and private sectors, and lists prices of competing energy resources. The summary describes key from data from the categories listed above. Part 1, Biomass Supply, presents data increasing levels of detail on agricultural residues, biogas, municipal solid waste, and wood waste. Part 2, Current Industrial and Commercial Use, demonstrates how biomass is successfully being used in existing facilities as an alternative fuel source. Part 3, Potential Demand, describes potential energy-intensive public and private sector facilities. Part 4, Prices of Competing Energy Resources, shows current suppliers of electricity and natural gas and compares utility company rates. 49 refs., 43 figs., 72 tabs.

  17. Biomass pretreatment: fundamentals toward application.

    PubMed

    Agbor, Valery B; Cicek, Nazim; Sparling, Richard; Berlin, Alex; Levin, David B

    2011-01-01

    Development of sustainable energy systems based on renewable biomass feedstocks is now a global effort. Lignocellulosic biomass contains polymers of cellulose, hemicellulose, and lignin, bound together in a complex structure. Liquid biofuels, such as ethanol, can be made from biomass via fermentation of sugars derived from the cellulose and hemicellulose within lignocellulosic materials, but the biomass must be subjected to pretreatment processes to liberate the sugars needed for fermentation. Production of value-added co-products along-side biofuels through integrated biorefinery processes creates the need for selectivity during pretreatment. This paper presents a survey of biomass pretreatment technologies with emphasis on concepts, mechanism of action and practicability. The advantages and disadvantages, and the potential for industrial applications of different pretreatment technologies are the highlights of this paper. PMID:21624451

  18. 75 FR 30012 - Friant Power Authority Orange Cove Irrigation District; Notice of Application Accepted for Filing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-28

    ... Energy Regulatory Commission Friant Power Authority Orange Cove Irrigation District; Notice of..., 2010. d. Applicant: Friant Power Authority and Orange Cove Irrigation District. e. Name of Project.... Fergus Morrissey, Orange Cove Irrigation District, 1130 Park Boulevard, Orange Cove, CA 93646;...

  19. 77 FR 28872 - Willwood Irrigation District; Notice of Preliminary Permit Application Accepted for Filing and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-16

    ... Energy Regulatory Commission Willwood Irrigation District; Notice of Preliminary Permit Application..., 2012, the Willwood Irrigation District filed an application for a preliminary permit, pursuant to... Hydropower Project (Deer Creek Project or project) to be ] located on the Willwood Irrigation District's...

  20. Sunflower as a potential biomass crop

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Biomass resources are essential for bioenergy production. There are two major criteria for determining whether a crop is suitable for energy use. The first is the high dry matter yield per land unit and the second is the net gain in energy amount (the amount of energy produced from the biomass shoul...

  1. 78 FR 64932 - Biomass Research and Development Technical Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-30

    ... Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy... Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food.... This notice announces the meeting of the Biomass Research and Development Technical Advisory...

  2. 78 FR 8500 - Biomass Research and Development Technical Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-06

    ... of Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory... Open Meeting. SUMMARY: This notice announces an open meeting of the Biomass Research and Development... promotes research and development leading to the production of biobased fuels and biobased...

  3. Determination of heavy metals concentrations in airborne particulates matter (APM) from Manjung district, Perak using energy dispersive X-ray fluorescence (EDXRF) spectrometer

    NASA Astrophysics Data System (ADS)

    Arshad, Nursyairah; Hamzah, Zaini; Wood, Ab. Khalik; Saat, Ahmad; Alias, Masitah

    2015-04-01

    Airborne particulates trace metals are considered as public health concern as it can enter human lungs through respiratory system. Generally, any substance that has been introduced to the atmosphere that can cause severe effects to living things and the environment is considered air pollution. Manjung, Perak is one of the development districts that is active with industrial activities. There are many industrial activities surrounding Manjung District area such as coal fired power plant, quarries and iron smelting which may contribute to the air pollution into the environment. This study was done to measure the concentrations of Hg, U, Th, K, Cu, Fe, Cr, Zn, As, Se, Pb and Cd in the Airborne Particulate Matter (APM) collected at nine locations in Manjung District area within 15 km radius towards three directions (North, North-East and South-East) in 5 km intervals. The samples were collected using mini volume air sampler with cellulose filter through total suspended particulate (TSP). The sampler was set up for eight hours with the flow rate of 5 L/min. The filter was weighed before and after sample collection using microbalance, to get the amount of APM and kept in desiccator before analyzing. The measurement was done using calibrated Energy Dispersive X-Ray Fluorescence (EDXRF) Spectrometer. The air particulate concentrations were found below the Malaysia Air Quality Guidelines for TSP (260 µg/m3). All of the metals concentrations were also lower than the guidelines set by World Health Organization (WHO), Ontario Ministry of the Environment and Argonne National Laboratory, USA NCRP (1975). From the concentrations, the enrichment factor were calculated.

  4. Energetic conversion of European semi-natural grassland silages through the integrated generation of solid fuel and biogas from biomass: energy yields and the fate of organic compounds.

    PubMed

    Hensgen, Frank; Bühle, Lutz; Donnison, Iain; Heinsoo, Katrin; Wachendorf, Michael

    2014-02-01

    Twelve European habitat types were investigated to determine the influence of the IFBB technique (integrated generation of biogas and solid fuel from biomass) on the fate of organic compounds and energy yields of semi-natural grassland biomass. Concentration of organic compounds in silage and IFBB press cake (PC), mass flows within that system and methane yields of IFBB press fluids (PF) were determined. The gross energy yield of the IFBB technique was calculated in comparison to hay combustion (HC) and whole crop digestion (WCD). The IFBB treatment increased fibre and organic matter (OM) concentrations and lowered non-fibre carbohydrates and crude protein concentrations. The PF was highly digestible irrespective of habitat types, showing mean methane yields between 312.1 and 405.0 LN CH4 kg(-1) VS. Gross energy yields for the IFBB system (9.75-30.19MWh ha(-1)) were in the range of HC, outperformed WCD and were influenced by the habitat type. PMID:24393744

  5. School District Mergers: What One District Learned

    ERIC Educational Resources Information Center

    Kingston, Kathleen

    2009-01-01

    Throughout the planning process for a school district merger in a northwestern Pennsylvania school district, effective communication proved to be a challenge. Formed in 1932, this school district of approximately 1400 students was part of a utopian community; one established by a transportation system's corporation that was a major industrial…

  6. Economic analysis of biomass power generation schemes under renewable energy initiative with Renewable Portfolio Standards (RPS) in Korea.

    PubMed

    Moon, Ji-Hong; Lee, Jeung-Woo; Lee, Uen-Do

    2011-10-01

    An economic analysis of biomass power generation was conducted. Two key technologies--direct combustion with a steam turbine and gasification with a syngas engine--were mainly examined. In view of the present domestic biomass infrastructure of Korea, a small and distributed power generation system ranging from 0.5 to 5 MW(e) was considered. It was found that gasification with a syngas engine becomes more economically feasible as the plant size decreases. Changes in the economic feasibilities with and without RPS or heat sales were also investigated. A sensitivity analysis of each system was conducted for representative parameters. Regarding the cost of electricity generation, electrical efficiency and fuel cost significantly affect both direct combustion and gasification systems. Regarding the internal rate of return (IRR), the heat sales price becomes important for obtaining a higher IRR, followed by power generation capacity and electrical efficiency. PMID:21856151

  7. Plasma Treatments and Biomass Gasification

    NASA Astrophysics Data System (ADS)

    Luche, J.; Falcoz, Q.; Bastien, T.; Leninger, J. P.; Arabi, K.; Aubry, O.; Khacef, A.; Cormier, J. M.; Lédé, J.

    2012-02-01

    Exploitation of forest resources for energy production includes various methods of biomass processing. Gasification is one of the ways to recover energy from biomass. Syngas produced from biomass can be used to power internal combustion engines or, after purification, to supply fuel cells. Recent studies have shown the potential to improve conventional biomass processing by coupling a plasma reactor to a pyrolysis cyclone reactor. The role of the plasma is twofold: it acts as a purification stage by reducing production of tars and aerosols, and simultaneously produces a rich hydrogen syngas. In a first part of the paper we present results obtained from plasma treatment of pyrolysis oils. The outlet gas composition is given for various types of oils obtained at different experimental conditions with a pyrolysis reactor. Given the complexity of the mixtures from processing of biomass, we present a study with methanol considered as a model molecule. This experimental method allows a first modeling approach based on a combustion kinetic model suitable to validate the coupling of plasma with conventional biomass process. The second part of the paper is summarizing results obtained through a plasma-pyrolysis reactor arrangement. The goal is to show the feasibility of this plasma-pyrolysis coupling and emphasize more fundamental studies to understand the role of the plasma in the biomass treatment processes.

  8. Biomass for biorefining: Resources, allocation, utilization, and policies

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The importance of biomass in the development of renewable energy, the availability and allocation of biomass, its preparation for use in biorefineries, and the policies affecting biomass are discussed in this chapter. Bioenergy development will depend on maximizing the amount of biomass obtained fro...

  9. 36 CFR 28.3 - Boundaries: The Community Development District; The Dune District; The Seashore District.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Development District; The Dune District; The Seashore District. 28.3 Section 28.3 Parks, Forests, and Public... General Provisions § 28.3 Boundaries: The Community Development District; The Dune District; The Seashore... Community Development District, the Seashore District, and the Dune District. (b) The Community...

  10. 36 CFR 28.3 - Boundaries: The Community Development District; The Dune District; The Seashore District.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Development District; The Dune District; The Seashore District. 28.3 Section 28.3 Parks, Forests, and Public... General Provisions § 28.3 Boundaries: The Community Development District; The Dune District; The Seashore... Community Development District, the Seashore District, and the Dune District. (b) The Community...

  11. 36 CFR 28.3 - Boundaries: The Community Development District; The Dune District; The Seashore District.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Development District; The Dune District; The Seashore District. 28.3 Section 28.3 Parks, Forests, and Public... General Provisions § 28.3 Boundaries: The Community Development District; The Dune District; The Seashore... Community Development District, the Seashore District, and the Dune District. (b) The Community...

  12. 36 CFR 28.3 - Boundaries: The Community Development District; The Dune District; The Seashore District.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Development District; The Dune District; The Seashore District. 28.3 Section 28.3 Parks, Forests, and Public... General Provisions § 28.3 Boundaries: The Community Development District; The Dune District; The Seashore... Community Development District, the Seashore District, and the Dune District. (b) The Community...

  13. 36 CFR 28.3 - Boundaries: The Community Development District; The Dune District; The Seashore District.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Development District; The Dune District; The Seashore District. 28.3 Section 28.3 Parks, Forests, and Public... General Provisions § 28.3 Boundaries: The Community Development District; The Dune District; The Seashore... Community Development District, the Seashore District, and the Dune District. (b) The Community...

  14. Situational Analysis of Household Energy and Biomass Use and Associated Health Burden of Indoor Air Pollution and Mitigation Efforts in Pakistan

    PubMed Central

    Fatmi, Zafar; Rahman, Asma; Kazi, Ambreen; Kadir, M. Masood; Sathiakumar, Nalini

    2010-01-01

    Biomass fuel burning leads to high levels of suspended particulate matter and hazardous chemicals in the indoor environment in countries where it is in common use, contributing significantly to indoor air pollution (IAP). A situational analysis of household energy and biomass use and associated health effects of IAP was conducted by reviewing published and un-published literature about the situation in Pakistan. In addition to attempt to quantify the burden of ill health due to IAP, this paper also appraises the mitigation measures undertaken to avert the problem in Pakistan. Unfortunately, IAP is still not a recognized environmental hazard in Pakistan and there are no policies and standards to control it at the household level. Only a few original studies related to health effects of IAP have been conducted, mainly on women’s health and birth outcome, and only a few governmental, non-governmental and academic institutions are working to improve the IAP situation by introducing improved stoves and renewable energy technology at a small scale. Control of IAP health hazards in Pakistan requires an initial meeting of the stakeholders to define a policy and an action agenda. Simultaneously, studies gathering evidence of impact of intervention through available technologies such as improved stoves would have favorable impact on the health, especially of women and children in Pakistan. PMID:20717550

  15. The regional environmental impact of biomass production

    SciTech Connect

    Graham, R.L.

    1994-09-01

    The objective of this paper is to present a broad overview of the potential environmental impacts of biomass energy from energy crops. The subject is complex because the environmental impact of using biomass for energy must be considered in the context of alternative energy options while the environmental impact of producing biomass from energy crops must be considered in the context of the alternative land-uses. Using biomass-derived energy can reduce greenhouse gas emissions or increase them; growing biomass energy crops can enhance soil fertility or degrade it. Without knowing the context of the biomass energy, one can say little about its specific environmental impacts. The primary focus of this paper is an evaluation of the environmental impacts of growing energy crops. I present an approach for quantitatively evaluating the potential environmental impact of growing energy crops at a regional scale that accounts for the environmental and economic context of the crops. However, to set the stage for this discussion, I begin by comparing the environmental advantages and disadvantages of biomass-derived energy relative to other energy alternatives such as coal, hydropower, nuclear power, oil/gasoline, natural gas and photovoltaics.

  16. Structural Studies of Biomass Degrading Enzyme Systems

    SciTech Connect

    Lunin, Vladimir V.; Alahuhta, Markus; Brunecky, Roman; Donohoe, Bryon; Xu, Qi; Bomble, Yannick J.; Himmel, Michael E.

    2014-08-05

    Renewable energy today comprises wind, photovoltaics, geothermal, and biofuels. Biomass is the leading source of renewable, sustainable energy used for the production of liquid transportation fuels. While the focus is shifting today from the ethanol towards next generation or advanced biofuels the real challenge however remains the same: reducing the recalcitrance of biomass to deconstruction, which yields the sugars needed for further processing.

  17. Synthetic and Biomass Alternate Fueling in Aviation

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.; Bushnell, Dennis M.

    2009-01-01

    Must use earth's most abundant natural resources - Biomass, Solar, Arid land (43%), Seawater (97%) with nutrients (80%) plus brackish waters and nutrients resolve environmental triangle of conflicts energy-food-freshwater and ultrafine particulate hazards. Requires Paradigm Shift - Develop and Use Solar* for energy; Biomass for aviation and hybrid-electric-compressed air mobility fueling with transition to hydrogen long term.

  18. Biomass Program 2007 Accomplishments - Full Report

    SciTech Connect

    none,

    2009-10-27

    The Office of Energy Efficiency and Renewable Energy's (EERE’s) Biomass Program works with industry, academia and its national laboratory partners on a balanced portfolio of research in biomass feedstocks and conversion technologies. This document provides Program accomplishments for 2007.

  19. Biomass Program 2007 Accomplishments - Report Introduction

    SciTech Connect

    none,

    2009-10-27

    The Office of Energy Efficiency and Renewable Energy's (EERE’s) Biomass Program works with industry, academia and its national laboratory partners on a balanced portfolio of research in biomass feedstocks and conversion technologies. This document provides the introduction to the 2007 Program Accomplishments Report.

  20. 75 FR 76695 - Request for Proposals for 2011 Woody Biomass Utilization Grant Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-09

    ... nationwide challenge of using low-value woody biomass material to create renewable energy. Goals of the grant... biomass for renewable energy. Assist projects that produce renewable energy from woody biomass. Reduce... business risk to increase use of woody biomass from our nation's forestlands for renewable energy...

  1. 77 FR 64970 - Biomass Research and Development Technical Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-24

    ... From the Federal Register Online via the Government Publishing Office ] DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice...

  2. 76 FR 9339 - Biomass Research and Development Technical Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-17

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Department of Energy, Office of Energy Efficiency and Renewable Energy. ACTION: Notice...

  3. 77 FR 20377 - Biomass Research and Development Technical Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-04

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice...

  4. Combustion, pyrolysis, gasification, and liquefaction of biomass

    SciTech Connect

    Reed, T.B.

    1980-09-01

    All the products now obtained from oil can be provided by thermal conversion of the solid fuels biomass and coal. As a feedstock, biomass has many advantages over coal and has the potential to supply up to 20% of US energy by the year 2000 and significant amounts of energy for other countries. However, it is imperative that in producing biomass for energy we practice careful land use. Combustion is the simplest method of producing heat from biomass, using either the traditional fixed-bed combustion on a grate or the fluidized-bed and suspended combustion techniques now being developed. Pyrolysis of biomass is a particularly attractive process if all three products - gas, wood tars, and charcoal - can be used. Gasification of biomass with air is perhaps the most flexible and best-developed process for conversion of biomass to fuel today, yielding a low energy gas that can be burned in existing gas/oil boilers or in engines. Oxygen gasification yields a gas with higher energy content that can be used in pipelines or to fire turbines. In addition, this gas can be used for producing methanol, ammonia, or gasoline by indirect liquefaction. Fast pyrolysis of biomass produces a gas rich in ethylene that can be used to make alcohols or gasoline. Finally, treatment of biomass with high pressure hydrogen can yield liquid fuels through direct liquefaction.

  5. Optimizing the use of bamboo biomass for energy and fiber from small-scale plantations in Thailand

    NASA Astrophysics Data System (ADS)

    Darabant, András; Haruthaithanasan, Maliwan; Atkla, Wanida; Phudphong, Tepa; Thanavat, Eakpong; Haruthaithanasan, Kasem

    2014-05-01

    Farmers in Thailand have recently started to establish bamboo plantations on marginal land, aiming at utilizing them for bioenergy and fiber. On two sites in eastern Thailand, first-year yield data of Bambusa beecheyana and Dendrocalamus membranaceus plantations indicated vast differences between sites (1 vs. 18 t*ha-1*a-1), but none between species. In terms of feedstock quality for power plants, High Heating Values (19.2 to 19.5 MJ*t-1) did not, but culm moisture contents did differ between species (51% for B. beecheyana vs. 45% for D. membranaceus), and culm sections (38% wet base at top vs. 55% at bottom). This gradient was stronger in D. membranaceus, which additionally showed significantly higher moisture content in internodes, as compared to nodes (46% vs. 43%). Analysis of fiber yield and quality indicated better suitability of D. membranaceus as opposed to B. beecheyana to be used in the textile industry. Our results provide guidance on increasing value addition to bamboo biomass by optimizing the allotment of different species and biomass compartments to different uses (bioenergy, fibers).

  6. Biomass torrefaction mill

    DOEpatents

    Sprouse, Kenneth M.

    2016-05-17

    A biomass torrefaction system includes a mill which receives a raw biomass feedstock and operates at temperatures above 400 F (204 C) to generate a dusty flue gas which contains a milled biomass product.

  7. Particulate matter emissions from combustion of wood in district heating applications

    SciTech Connect

    Ghafghazi, S.; Sowlati, T.; Sokhansanj, Shahabaddine; Bi, X.T.; Melin, Staffan

    2011-01-01

    The utilization of wood biomass to generate district heat and power in communities that have access to this energy source is increasing. In this paper the effect of wood fuel properties, combustion condition, and flue gas cleaning system on variation in the amount and formation of particles in the flue gas of typical district heating wood boilers are discussed based on the literature survey. Direct measurements of particulate matter (PM) emissions from wood boilers with district heating applications are reviewed and presented. Finally, recommendations are given regarding the selection of wood fuel, combustion system condition, and flue gas cleaning system in district heating systems in order to meet stringent air quality standards. It is concluded that utilization of high quality wood fuel, such as wood pellets produced from natural, uncontaminated stem wood, would generate the least PM emissions compared to other wood fuel types. Particulate matter emissions from grate burners equipped with electrostatic precipitators when using wood pellets can be well below stringent regulatory emission limit such as particulate emission limit of Metro Vancouver, Canada.

  8. EERC Center for Biomass Utilization 2006

    SciTech Connect

    Zygarlicke, Christopher J.; Hurley, John P.; Aulich, Ted R.; Folkedahl, Bruce C.; Strege, Joshua R.; Patel, Nikhil; Shockey, Richard E.

    2009-05-27

    The Center for Biomass Utilization® 2006 project at the Energy & Environmental Research Center (EERC) consisted of three tasks related to applied fundamental research focused on converting biomass feedstocks to energy, liquid transportation fuels, and chemicals. Task 1, entitled Thermochemical Conversion of Biomass to Syngas and Chemical Feedstocks, involved three activities. Task 2, entitled Crop Oil Biorefinery Process Development, involved four activities. Task 3, entitled Management, Education, and Outreach, focused on overall project management and providing educational outreach related to biomass technologies through workshops and conferences.

  9. Potential role of district heating in the US

    SciTech Connect

    Powell, J.R.; Karkheck, J.

    1981-01-01

    The potential market penetration of district heating in the US is discussed. Estimates of optimal service levels, capital investment, and energy conservation potential are discussed. The technological concept of modern district heating and specific assessments of district heating in the US are briefly described. (MCW)

  10. NREL Turning Biomass into Adhesives and Plastics

    SciTech Connect

    Not Available

    1994-05-01

    The U.S. Department of Energy (DOE) and it's National Renewable Energy Laboratory (NREL) are developing technology to make wood adhesives from sawdust, bark, or other biomass (plant materials or wastes derived from them).

  11. Application of sugar maple and black locust to the biomass/energy plantation concept. Interim report, March 1, 1980-February 28, 1981. [Sugar Maples, Black Locusts

    SciTech Connect

    Not Available

    1981-03-01

    The objective of the research program is to determine the feasibility of converting existing pole-size maple stands to biomass/energy plantations using black locust as an interplanted species. Toward this end, progress has been made in quantifying sprout biomass. Significant differences have been identified in productivity by site, species, time of fertilizer application, and diameter and damage of stumps. Rhizobium strains for black locust have been identified which are tolerant of low pH and phosphorous and high aluminum levels. Frost-hardy black locust seed sources have been identified for future work. Methods for sampling and equations for young natural stands of maple have been developed. Detailed characterization of sugar and red maple sprouts by physical, chemical and thermal analysis were compared to those of old, mature trees. The results are discussed in terms of seasonal moisture content variation, effects of tree age on specific gravity, extractive contents, ash content, major cell wall components, heating values and thermal behavior. 7 references, 5 figures, 17 tables.

  12. Monitoring and Modeling of Large-Scale Pattern of Forest Height and Biomass based on the Metabolic Scaling Theory and Water-Energy Balance Equation

    NASA Astrophysics Data System (ADS)

    CHOI, S.; Myneni, R. B.; Knyazikhin, Y.; Park, T.

    2015-12-01

    This study applies the metabolic scaling theory (MST) and water-energy balance equation (PM: Penman-Monteith) to monitor and model the large-scale pattern of forest height and biomass. The WBE and PM theories grant a generalized mechanistic understanding of relationships between the forest structure and multiple geospatial predictors including topography and climatic variables. We successfully expanded the average trend and predictions of the MST and PM by including eco-regional and plant functional type variations. Our model now accounts for plant interaction, self-competition and disturbance effects to alleviate known limitations of the MST. The topographic heterogeneity and climate seasonality are additionally incorporated in the model predictions. A simple and clear mechanistic understanding in the model is promising for prognostic applications in contrast to conventional black-box approaches. This study provides baseline maps (circa 2005; 1-km2 grids) of the maximum forest canopy heights and aboveground biomass over the continental USA. Their future projections are also delivered using various climate scenarios. The NASA Earth Exchange (NEX) Downscaled Climate Projections (NEX-DCP30) dataset is used in this task.

  13. Assessment of fuel-cycle energy use and greenhouse gas emissions for Fischer-Tropsch diesel from coal and cellulosic biomass.

    SciTech Connect

    Xie, X.; Wang, M.; Han, J.

    2011-04-01

    This study expands and uses the GREET (Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation) model to assess the effects of carbon capture and storage (CCS) technology and cellulosic biomass and coal cofeeding in Fischer-Tropsch (FT) plants on energy use and greenhouse gas (GHG) emissions of FT diesel (FTD). To demonstrate the influence of the coproduct credit methods on FTD life-cycle analysis (LCA) results, two allocation methods based on the energy value and the market revenue of different products and a hybrid method are employed. With the energy-based allocation method, fossil energy use of FTD is less than that of petroleum diesel, and GHG emissions of FTD could be close to zero or even less than zero with CCS when forest residue accounts for 55% or more of the total dry mass input to FTD plants. Without CCS, GHG emissions are reduced to a level equivalent to that from petroleum diesel plants when forest residue accounts for 61% of the total dry mass input. Moreover, we show that coproduct method selection is crucial for LCA results of FTD when a large amount of coproducts is produced.

  14. EERC Center for Biomass Utilization 2005

    SciTech Connect

    Zygarlicke, C J; Schmidt, D D; Olson, E S; Leroux, K M; Wocken, C A; Aulich, T A; WIlliams, K D

    2008-07-28

    Biomass utilization is one solution to our nation’s addiction to oil and fossil fuels. What is needed now is applied fundamental research that will cause economic technology development for the utilization of the diverse biomass resources in the United States. This Energy & Environmental Research Center (EERC) applied fundamental research project contributes to the development of economical biomass utilization for energy, transportation fuels, and marketable chemicals using biorefinery methods that include thermochemical and fermentation processes. The fundamental and basic applied research supports the broad scientific objectives of the U.S. Department of Energy (DOE) Biomass Program, especially in the area of developing alternative renewable biofuels, sustainable bioenergy, technologies that reduce greenhouse gas emissions, and environmental remediation. Its deliverables include 1) identifying and understanding environmental consequences of energy production from biomass, including the impacts on greenhouse gas production, carbon emission abatement, and utilization of waste biomass residues and 2) developing biology-based solutions that address DOE and national needs related to waste cleanup, hydrogen production from renewable biomass, biological and chemical processes for energy and fuel production, and environmental stewardship. This project serves the public purpose of encouraging good environmental stewardship by developing biomass-refining technologies that can dramatically increase domestic energy production to counter current trends of rising dependence upon petroleum imports. Decreasing the nation’s reliance on foreign oil and energy will enhance national security, the economy of rural communities, and future competitiveness. Although renewable energy has many forms, such as wind and solar, biomass is the only renewable energy source that can be governed through agricultural methods and that has an energy density that can realistically compete with

  15. 77 FR 42298 - Biomass Research and Development Technical Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-18

    ... Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy... Appointment as a Member of the Biomass Research and Development Technical Advisory Committee. SUMMARY: In... soliciting nominations for candidates to fill vacancies on the Biomass Research and Development...

  16. Pollutant emissions and energy efficiency under controlled conditions for household biomass cookstoves and implications for metrics useful in setting international test standards.

    PubMed

    Jetter, James; Zhao, Yongxin; Smith, Kirk R; Khan, Bernine; Yelverton, Tiffany; Decarlo, Peter; Hays, Michael D

    2012-10-01

    Realistic metrics and methods for testing household biomass cookstoves are required to develop standards needed by international policy makers, donors, and investors. Application of consistent test practices allows emissions and energy efficiency performance to be benchmarked and enables meaningful comparisons among traditional and advanced stove types. In this study, 22 cookstoves burning six fuel types (wood, charcoal, pellets, corn cobs, rice hulls, and plant oil) at two fuel moisture levels were examined under laboratory-controlled operating conditions as outlined in the Water Boiling Test (WBT) protocol, Version 4. Pollutant emissions (carbon dioxide, carbon monoxide, methane, total hydrocarbons, and ultrafine particles) were continuously monitored. Fine particle mass was measured gravimetrically for each WBT phase. Additional measurements included cookstove power, energy efficiency, and fuel use. Emission factors are given on the basis of fuel energy, cooking energy, fuel mass, time, and cooking task or activity. The lowest PM(2.5) emissions were 74 mg MJ(delivered)(-1) from a technologically advanced cookstove compared with 700-1400 mg MJ(delivered)(-1) from the base-case open 3-stone cookfire. The highest thermal efficiency was 53% compared with 14-15% for the 3-stone cookfire. Based on these laboratory-controlled test results and observations, recommendations for developing potentially useful metrics for setting international standards are suggested. PMID:22924525

  17. An energy balance from absorbed photons to new biomass for Chlamydomonas reinhardtii and Chlamydomonas acidophila under neutral and extremely acidic growth conditions.

    PubMed

    Langner, Uwe; Jakob, Torsten; Stehfest, Katja; Wilhelm, Christian

    2009-03-01

    Chlamydomonas is one of the most well-studied photosynthetic organisms that had important biotechnological potential for future bioproductions of biofuels. However, an energy balance from incident photons to the energy stored in the new biomass is still lacking. In this study, we applied a recently developed system to measure the energy balance for steady state growth of Chlamydomonas reinhardtii grown at pH 6.5, and C. acidophila that was grown at pH 6.5 and 2.6. Energy use efficiency was quantified on the basis of light absorption, photosynthetic quantum yield, photosynthetic and respiratory quotient, and electron partitioning into proteins, carbohydrates and lipids. The results showed that lower growth rates of C. acidophila under both pH conditions were not caused by the differences in the photosynthetic quantum yield or in alternative electron cycling, but rather by differences in the efficiency of light absorption and increased dark respiration. Analysis of the macromolecular composition of the cells during the light phase showed that C. acidophila uses biosynthetic electrons preferentially for carbohydrate synthesis but not for synthesis of lipids. This led to a strong diurnal cycle of the C/N ratio and could explain the higher dark respiration of C. acidophila compared with C. reinhardtii. PMID:19054351

  18. Discovering the desirable alleles contributing to the lignocellulosic biomass traits in saccharum germplasm collections for energy cane improvement

    SciTech Connect

    Todd, James; Comstock, Jack C.

    2015-11-25

    of the cores and the World Collection are similar to each other genotypically and phenotypically, but the core that was selected using only genotypic data was significantly different phenotypically. This indicates that there is not enough association between the genotypic and phenotypic diversity as to select using only genotypic diversity and get the full phenotypic diversity. Core Collection: Creation and Phenotyping Methods: To evaluate this germplasm for breeding purposes, a representative diversity panel selected from the WCSRG of approximately 300 accessions was planted at Canal Point, FL in three replications. These accessions were measured for stalk height and stalk number multiple times throughout the growing season and Brix and fresh biomass during harvest in 2013 and, stalk height, stalk number, stalk diameter, internode length, Brix and fresh and dry biomass was determined in the ratoon crop harvest in 2014. Results: In correlations of multiple measurements, there were higher correlations for early measurements of stalk number and stalk height with harvest traits like Brix and fresh weight. Hybrids had higher fresh mass and Brix while Saccharum spontaneum had higher stalk number and dry mass. The heritability of hybrid mass traits was lower in the ratoon crop. According to the principal component analysis, the diversity panel was divided into two groups. One group had accessions with high stalk number and high dry biomass like S. spontaneum and the other groups contained accessions with higher Brix and fresh biomass like S. officinarum. Mass traits correlated with each other as expected but hybrids had lower correlations between fresh and dry mass. Stalk number and the mass traits correlated with each other except in S. spontaneum and hybrids in the first ratoon. There were 110 accessions not significantly different in Brix from the commercial sugarcane checks including 10 S. spontaneum accessions. There were 27 dry and 6 fresh mass accessions

  19. Maintenance Energy Demand and Starvation Recovery Dynamics of Nitrosomonas europaea and Nitrobacter winogradskyi Cultivated in a Retentostat with Complete Biomass Retention

    PubMed Central

    Tappe, W.; Laverman, A.; Bohland, M.; Braster, M.; Rittershaus, S.; Groeneweg, J.; van Verseveld, H. W.

    1999-01-01

    Nitrosomonas europaea and Nitrobacter winogradskyi (strain “Engel”) were grown in ammonia-limited and nitrite-limited conditions, respectively, in a retentostat with complete biomass retention at 25°C and pH 8. Fitting the retentostat biomass and oxygen consumption data of N. europaea and N. winogradskyi to the linear equation for substrate utilization resulted in up to eight-times-lower maintenance requirements compared to the maintenance energy demand (m) calculated from chemostat experiments. Independent of the growth rate at different stages of such a retention culture, the maximum specific oxygen consumption rate measured by mass spectrometric analysis of inlet and outlet gas oxygen content always amounted to approximately 45 μmol of O2 mg−1 of biomass-C · h−1 for both N. europaea and N. winogradskyi. When bacteria were starved for different time periods (up to 3 months), the spontaneous respiratory activity after an ammonia or nitrite pulse decreased with increasing duration of the previous starvation time period, but the observed decrease was many times faster for N. winogradskyi than for N. europaea. Likewise, the velocity of resuscitation decreased with extended time periods of starvation. The increase in oxygen consumption rates during resuscitation referred to the reviving population only, since in parallel no significant increase in the cell concentrations was detectable. N. europaea more readily recovers from starvation than N. winogradskyi, explaining the occasionally observed nitrite accumulation in the environment after ammonia becomes available. From chloramphenicol (100 μg · ml−1) inhibition experiments with N. winogradskyi, it has been concluded that energy-starved cells must have a lower protein turnover rate than nonstarved cells. As pointed out by Stein and Arp (L. Y. Stein and D. J. Arp, Appl. Environ. Microbiol. 64:1514–1521, 1998), nitrifying bacteria in soil have to cope with extremely low nutrient concentrations

  20. Enzymatic Hydrolysis of Cellulosic Biomass

    SciTech Connect

    Yang, Bin; Dai, Ziyu; Ding, Shi-You; Wyman, Charles E.

    2011-08-22

    Biological conversion of cellulosic biomass to fuels and chemicals offers the high yields to products vital to economic success and the potential for very low costs. Enzymatic hydrolysis that converts lignocellulosic biomass to fermentable sugars may be the most complex step in this process due to substrate-related and enzyme-related effects and their interactions. Although enzymatic hydrolysis offers the potential for higher yields, higher selectivity, lower energy costs, and milder operating conditions than chemical processes, the mechanism of enzymatic hydrolysis and the relationship between the substrate structure and function of various glycosyl hydrolase components are not well understood. Consequently, limited success has been realized in maximizing sugar yields at very low cost. This review highlights literature on the impact of key substrate and enzyme features that influence performance to better understand fundamental strategies to advance enzymatic hydrolysis of cellulosic biomass for biological conversion to fuels and chemicals. Topics are summarized from a practical point of view including characteristics of cellulose (e.g., crystallinity, degree of polymerization, and accessible surface area) and soluble and insoluble biomass components (e.g., oligomeric xylan, lignin, etc.) released in pretreatment, and their effects on the effectiveness of enzymatic hydrolysis. We further discuss the diversity, stability, and activity of individual enzymes and their synergistic effects in deconstructing complex lignocellulosic biomass. Advanced technologies to discover and characterize novel enzymes and to improve enzyme characteristics by mutagenesis, post-translational modification, and over-expression of selected enzymes and modifications in lignocellulosic biomass are also discussed.

  1. Biomass treatment method

    DOEpatents

    Friend, Julie; Elander, Richard T.; Tucker, III; Melvin P.; Lyons, Robert C.

    2010-10-26

    A method for treating biomass was developed that uses an apparatus which moves a biomass and dilute aqueous ammonia mixture through reaction chambers without compaction. The apparatus moves the biomass using a non-compressing piston. The resulting treated biomass is saccharified to produce fermentable sugars.

  2. Evaluation of the District of Columbia Energy Office Residential Conservation Assistance Program for Natural Gas-Heated Single-Family Homes

    SciTech Connect

    McCold, Lance Neil; Schmoyer, Richard L

    2007-03-01

    At the request of the U.S. Department of Energy (DOE), Oak Ridge National Laboratory (ORNL), with assistance from the District of Columbia Energy Office (DCEO) performed an evaluation of part of the DCEO Residential Conservation Assistance Program (RCAP). The primary objective of the evaluation was to evaluate the effectiveness of the DCEO weatherization program. Because Weatherization Assistance Program (WAP) funds are used primarily for weatherization of single-family homes and because evaluating the performance of multi-family residences would be more complex than the project budget would support, ORNL and DCEO focused the study on gas-heated single-family homes. DCEO provided treatment information and arranged for the gas utility to provide billing data for 100 treatment houses and 434 control houses. The Princeton Scorkeeping Method (PRISM) software package was used to normalize energy use for standard weather conditions. The houses of the initial treatment group of 100 houses received over 450 measures costing a little over $180,000, including labor and materials. The average cost per house was $1,811 and the median cost per house was $1,674. Window replacement was the most common measure and accounted for about 35% of total expenditures. Ceiling and floor insulation was installed in 61 houses and accounts for almost 22% of the expenditures. Twenty-seven houses received replacement doors at an average cost of $620 per house. Eight houses received furnace or boiler replacements at an average cost of about $3,000 per house. The control-adjusted average measured savings are about 20 therms/year. The 95% confidence interval is approximately +20 to +60 therms/year. The average pre-weatherization energy consumption of the houses was about 1,100 therm/year. Consequently, the adjusted average savings is approximately 2% ({+-}4%)-not significantly different than zero. Most RCAP expenditures appear to go to repairs. While some repairs may have energy benefits, measures

  3. Utilization of residual forest biomass

    SciTech Connect

    Hakkila, P.

    1989-01-01

    The first world-wide energy crisis in the early 1970s resulted in an explosive increase in both the number and diversity of studies on unmerchantable tree components such as tops, branches, foliage, stumps, and roots, and on whole small-sized trees. This book presents a synopsis and the latest information on forest biomass utilization and the potential of this renewable raw material resource, presented from an interdisciplinary viewpoint. This balanced review of scientific literature as well as recent practical developments and experience in forest biomass utilization covers various aspects of quantity and properties of the resource, harvesting and transport, ecological consequences of intensive biomass recovery, comminution and upgrading, utilization for pulp, paper, composite boards, fodder, and energy in solid, liquid, or gaseous form.

  4. 78 FR 44105 - Biomass Research and Development Technical Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-23

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy... contact (Departments of Energy and Agriculture) with respect to the Biomass R&D Initiative...

  5. Modelling air quality impact of a biomass energy power plant in a mountain valley in Central Italy

    NASA Astrophysics Data System (ADS)

    Curci, Gabriele; Cinque, Giovanni; Tuccella, Paolo; Visconti, Guido; Verdecchia, Marco; Iarlori, Marco; Rizi, Vincenzo

    2012-12-01

    In this study, we investigate the potential impact on local air quality of a biomass power plant, which is planned for installation near L'Aquila, a city of 70,000 people located in a mountain valley in Central Italy. The assessment is carried out by applying a one year simulation with the CALPUFF model, following the recommendations of the U. S. Environmental Protection Agency. Meteorological input is produced with CALMET model, fed with both MM5 meteorological fields at 3 km resolution and wind observations from a surface weather station. We estimate small (<0.5 μg m-3) annual average increments to SO2, NO2 and PM10 ambient levels over the domain of interest, but significant (up to 50% for NO2) enhancements and several violations (up to 141 for NO2) of hourly limits for human protection within 1.5 km from the source. These results anticipate a larger negative effect on local air quality than those published by the building firm of the plant. We also suggest that a minimum distance of 5 km from the nearest residential area would represent a significant decrease of population exposure.

  6. Well-to-wheels energy use and greenhouse gas emissions of ethanol from corn, sugarcane and cellulosic biomass for US use

    NASA Astrophysics Data System (ADS)

    Wang, Michael; Han, Jeongwoo; Dunn, Jennifer B.; Cai, Hao; Elgowainy, Amgad

    2012-12-01

    Globally, bioethanol is the largest volume biofuel used in the transportation sector, with corn-based ethanol production occurring mostly in the US and sugarcane-based ethanol production occurring mostly in Brazil. Advances in technology and the resulting improved productivity in corn and sugarcane farming and ethanol conversion, together with biofuel policies, have contributed to the significant expansion of ethanol production in the past 20 years. These improvements have increased the energy and greenhouse gas (GHG) benefits of using bioethanol as opposed to using petroleum gasoline. This article presents results from our most recently updated simulations of energy use and GHG emissions that result from using bioethanol made from several feedstocks. The results were generated with the GREET (Greenhouse gases, Regulated Emissions, and Energy use in Transportation) model. In particular, based on a consistent and systematic model platform, we estimate life-cycle energy consumption and GHG emissions from using ethanol produced from five feedstocks: corn, sugarcane, corn stover, switchgrass and miscanthus. We quantitatively address the impacts of a few critical factors that affect life-cycle GHG emissions from bioethanol. Even when the highly debated land use change GHG emissions are included, changing from corn to sugarcane and then to cellulosic biomass helps to significantly increase the reductions in energy use and GHG emissions from using bioethanol. Relative to petroleum gasoline, ethanol from corn, sugarcane, corn stover, switchgrass and miscanthus can reduce life-cycle GHG emissions by 19-48%, 40-62%, 90-103%, 77-97% and 101-115%, respectively. Similar trends have been found with regard to fossil energy benefits for the five bioethanol pathways.

  7. Spin systems and Political Districting Problem

    NASA Astrophysics Data System (ADS)

    Chou, Chung-I.; Li, Sai-Ping

    2007-03-01

    The aim of the Political Districting Problem is to partition a territory into electoral districts subject to some constraints such as contiguity, population equality, etc. In this paper, we apply statistical physics methods to Political Districting Problem. We will show how to transform the political problem to a spin system, and how to write down a q-state Potts model-like energy function in which the political constraints can be written as interactions between sites or external fields acting on the system. Districting into q voter districts is equivalent to finding the ground state of this q-state Potts model. Searching for the ground state becomes an optimization problem, where optimization algorithms such as the simulated annealing method and Genetic Algorithm can be employed here.

  8. Pyrolysis kinetic and product analysis of different microalgal biomass by distributed activation energy model and pyrolysis-gas chromatography-mass spectrometry.

    PubMed

    Yang, Xuewei; Zhang, Rui; Fu, Juan; Geng, Shu; Cheng, Jay Jiayang; Sun, Yuan

    2014-07-01

    To assess the energy potential of different microalgae, Chlorella sorokiniana and Monoraphidium were selected for studying the pyrolytic behavior at different heating rates with the analytical method of thermogravimetric analysis (TG), distributed activation energy model (DAEM) and pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). Results presented that Monoraphidium 3s35 showed superiority for pyrolysis at low heating rate. Calculated by DAEM, during the conversion rate range from 0.1 to 0.7, the activation energies of C. sorokiniana 21 were much lower than that of Monoraphidium 3s35. Both C. sorokiniana 21 and Monoraphidium 3s35 can produce certain amount (up to 20.50%) of alkane compounds, with 9-Octadecyne (C18H34) as the primary compound. Short-chain alkanes (C7-C13) with unsaturated carbon can be released in the pyrolysis at 500°C for both microalgal biomass. It was also observed that the pyrolysis of C. sorokiniana 21 released more alcohol compounds, while Monoraphidium 3s35 produced more saccharides. PMID:24835746

  9. Biomass yield from an urban landscape

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Utilizing biomass from urban landscapes could significantly contribute to the nation’s renewable energy needs. In 2007, an experiment was begun to evaluate the biomass production from a bermudagrass, Cynodon dactylon var. dactylon (L.) Pers., lawn in Woodward, Oklahoma and to estimate the potential...

  10. 75 FR 6263 - Biomass Crop Assistance Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-08

    ...The Commodity Credit Corporation (CCC) proposes regulations to implement the new Biomass Crop Assistance Program (BCAP) authorized by the Food, Conservation, and Energy Act of 2008 (the 2008 Farm Bill). BCAP is intended to assist agricultural and forest land owners and operators with the establishment and production of eligible crops including woody biomass in selected project areas for......

  11. COFIRING BIOMASS WITH LIGNITE COAL

    SciTech Connect

    Darren D. Schmidt

    2002-01-01

    The University of North Dakota Energy & Environmental Research Center, in support of the U.S. Department of Energy's (DOE) biomass cofiring program, completed a Phase 1 feasibility study investigating aspects of cofiring lignite coal with biomass relative to utility-scale systems, specifically focusing on a small stoker system located at the North Dakota State Penitentiary (NDSP) in Bismarck, North Dakota. A complete biomass resource assessment was completed, the stoker was redesigned to accept biomass, fuel characterization and fireside modeling tests were performed, and an engineering economic analysis was completed. In general, municipal wood residue was found to be the most viable fuel choice, and the modeling showed that fireside problems would be minimal. Experimental ash deposits from firing 50% biomass were found to be weaker and more friable compared to baseline lignite coal. Experimental sulfur and NO{sub x} emissions were reduced by up to 46%. The direct costs savings to NDSP, from cogeneration and fuel saving, results in a 15- to 20-year payback on a $1,680,000 investment, while the total benefits to the greater community would include reduced landfill burden, alleviation of fees for disposal by local businesses, and additional jobs created both for the stoker system as well as from the savings spread throughout the community.

  12. Microwave induced pyrolysis of oil palm biomass.

    PubMed

    Salema, Arshad Adam; Ani, Farid Nasir

    2011-02-01

    The purpose of this paper was to carry out microwave induced pyrolysis of oil palm biomass (shell and fibers) with the help of char as microwave absorber (MA). Rapid heating and yield of microwave pyrolysis products such as bio-oil, char, and gas was found to depend on the ratio of biomass to microwave absorber. Temperature profiles revealed the heating characteristics of the biomass materials which can rapidly heat-up to high temperature within seconds in presence of MA. Some characterization of pyrolysis products was also presented. The advantage of this technique includes substantial reduction in consumption of energy, time and cost in order to produce bio-oil from biomass materials. Large biomass particle size can be used directly in microwave heating, thus saving grinding as well as moisture removal cost. A synergistic effect was found in using MA with oil palm biomass. PMID:20970995

  13. Biomass Resource Allocation among Competing End Uses

    SciTech Connect

    Newes, E.; Bush, B.; Inman, D.; Lin, Y.; Mai, T.; Martinez, A.; Mulcahy, D.; Short, W.; Simpkins, T.; Uriarte, C.; Peck, C.

    2012-05-01

    The Biomass Scenario Model (BSM) is a system dynamics model developed by the U.S. Department of Energy as a tool to better understand the interaction of complex policies and their potential effects on the biofuels industry in the United States. However, it does not currently have the capability to account for allocation of biomass resources among the various end uses, which limits its utilization in analysis of policies that target biomass uses outside the biofuels industry. This report provides a more holistic understanding of the dynamics surrounding the allocation of biomass among uses that include traditional use, wood pellet exports, bio-based products and bioproducts, biopower, and biofuels by (1) highlighting the methods used in existing models' treatments of competition for biomass resources; (2) identifying coverage and gaps in industry data regarding the competing end uses; and (3) exploring options for developing models of biomass allocation that could be integrated with the BSM to actively exchange and incorporate relevant information.

  14. 78 FR 41390 - Pershing County Water Conservation District; Notice of Application Tendered for Filing with the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-10

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Pershing County Water Conservation District; Notice of Application Tendered...: Pershing County Water Conservation District. e. Name of Project: Humboldt River Hydro Power Project....

  15. 75 FR 74697 - Central Oregon Irrigation District; Notice of Competing Preliminary Permit Application Accepted...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-01

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Central Oregon Irrigation District; Notice of Competing Preliminary Permit..., 2010, Central Oregon Irrigation District filed an application for a preliminary permit, pursuant...

  16. 77 FR 27768 - Greybull Valley Irrigation District; Notice of Preliminary Permit Application Accepted for Filing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-11

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Greybull Valley Irrigation District; Notice of Preliminary Permit... February 1, 2012, the Greybull Valley Irrigation District filed an application for a preliminary...

  17. 77 FR 27769 - Greybull Valley Irrigation District; Notice of Preliminary Permit Application Accepted for Filing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-11

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Greybull Valley Irrigation District; Notice of Preliminary Permit... February 1, 2012, the Greybull Valley Irrigation District filed an application for a preliminary...

  18. 77 FR 27768 - Greybull Valley Irrigation District; Notice of Preliminary Permit Application Accepted for Filing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-11

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Greybull Valley Irrigation District; Notice of Preliminary Permit... February 1, 2012, Greybull Valley Irrigation District filed an application for a preliminary...

  19. Progress in biomass conversion. Vol. 4

    SciTech Connect

    Tillman, D.A.; Jahn, E.C.

    1983-01-01

    This book contains 10 chapters by various authors: Lipid crops for chemicals and fuels; Lignin utilization: potential and challenge; Adhesives from natural resources; Formation of NO and particulates during suspension-phase wood combustion; Wood energy use in the wood products industry: what the data show; Advances in chemical pulping processes; Making the best energy use of wood; A predictive model for stratified downdraft gasification of biomass; Small scale industrial biomass systems; and Biomass augmented ocean thermal energy conversion systems. An index is included.

  20. Design and construction of coal/biomass to liquids (CBTL) process development unit (PDU) at the University of Kentucky Center for Applied Energy Research (CAER)

    SciTech Connect

    Placido, Andrew; Liu, Kunlei; Challman, Don; Andrews, Rodney; Jacques, David

    2015-10-30

    This report describes a first phase of a project to design, construct and commission an integrated coal/biomass-to-liquids facility at a capacity of 1 bbl. /day at the University of Kentucky Center for Applied Energy Research (UK-CAER) – specifically for construction of the building and upstream process units for feed handling, gasification, and gas cleaning, conditioning and compression. The deliverables from the operation of this pilot plant [when fully equipped with the downstream process units] will be firstly the liquid FT products and finished fuels which are of interest to UK-CAER’s academic, government and industrial research partners. The facility will produce research quantities of FT liquids and finished fuels for subsequent Fuel Quality Testing, Performance and Acceptability. Moreover, the facility is expected to be employed for a range of research and investigations related to: Feed Preparation, Characteristics and Quality; Coal and Biomass Gasification; Gas Clean-up/ Conditioning; Gas Conversion by FT Synthesis; Product Work-up and Refining; Systems Analysis and Integration; and Scale-up and Demonstration. Environmental Considerations - particularly how to manage and reduce carbon dioxide emissions from CBTL facilities and from use of the fuels - will be a primary research objectives. Such a facility has required significant lead time for environmental review, architectural/building construction, and EPC services. UK, with DOE support, has advanced the facility in several important ways. These include: a formal EA/FONSI, and permits and approvals; construction of a building; selection of a range of technologies and vendors; and completion of the upstream process units. The results of this project are the FEED and detailed engineering studies, the alternate configurations and the as-built plant - its equipment and capabilities for future research and demonstration and its adaptability for re-purposing to meet other needs. These are described in

  1. Fast pyrolysis of guayule biomass

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The sustainability of industrial crops like guayule, a domestic source of natural rubber, can be significantly enhanced by utilization of biomass residues. Guayule bagasse, a free-flowing solid, presents an attractive bioenergy feedstock due to its high energy content, small particle size, and high...

  2. Biomass Power for Rural Development

    SciTech Connect

    2000-06-01

    The U.S. Departments of Energy and Agriculture work together to advance the development of electricity generation systems that use biomass instead of fossil fuels. The national benefits include lower sulfur emissions (which contribute to acid rain), reductions in greenhouse gas emissions, and less dependence on fossil fuels.

  3. District cooling in Scandinavia

    SciTech Connect

    Andersson, B.

    1996-11-01

    This paper will present the status of the development of district cooling systems in Scandinavia over the last 5 years. It will describe the technologies used in the systems that have been constructed as well as the options considered in different locations. It will identify the drivers for the development of the cooling business to-date, and what future drivers for a continuing development of district cooling in Sweden. To-date, approximately 25 different cities of varying sizes have completed feasibility studies to determine if district cooling is an attractive option. In a survey, that was conducted by the Swedish District Heating Association, some 25 cities expected to have district cooling systems in place by the year 2000. In Sweden, district heating systems with hot water is very common. In many cases, it is simply an addition to the current service for the district heating company to also supply district cooling to the building owners. A parallel from this can be drawn to North America where district cooling systems now are developing rapidly. I am convinced that in these cities a district heating service will be added as a natural expansion of the district cooling company`s service.

  4. Assessment of Biomass Resources in Afghanistan

    SciTech Connect

    Milbrandt, A.; Overend, R.

    2011-01-01

    Afghanistan is facing many challenges on its path of reconstruction and development. Among all its pressing needs, the country would benefit from the development and implementation of an energy strategy. In addition to conventional energy sources, the Afghan government is considering alternative options such as energy derived from renewable resources (wind, solar, biomass, geothermal). Biomass energy is derived from a variety of sources -- plant-based material and residues -- and can be used in various conversion processes to yield power, heat, steam, and fuel. This study provides policymakers and industry developers with information on the biomass resource potential in Afghanistan for power/heat generation and transportation fuels production. To achieve this goal, the study estimates the current biomass resources and evaluates the potential resources that could be used for energy purposes.

  5. Biofuel from "humified" biomass

    NASA Astrophysics Data System (ADS)

    Kpogbemabou, D.; Lemée, L.; Amblès, A.

    2009-04-01

    not look forward to obtain a mature OM for which the carbon loss would be too important. The global analysis of the biomass OM during biodegradation using infrared spectroscopy (DRIFTS) confirms "humification". Indeed the relative intensity of bands associated to aromatics increase relatively to those associated to aliphatics[2] [3]. The molecular study of lipids and humic fractions was realised using mass spectrometry (GC/MS), pyrolysis (Py-GC/MS) and thermodesorption (Headspace-GC/MS). The decrease in lipids indicates a high biodegradation. Amongst volatile organic compounds (COVs), the isoprenoid C18 ketone which is probably produced from biodegradation of phytol is observed in all our samples. The organic matter obtained after biodegradation is stable (resistant to biodegradation) and humified but still rich in carbon. The characterisation of bacterial biomarkers will help us to specify and thus to optimize biotransformation mechanisms. [1] A. Dermirbas and Al, Progress in energy and combustion science, 33 (2007), 1 - 18. [2] P. Castaldi and Al, Waste Management, 25 (2005), 213 - 217. [3] Mr. Crube and Al, Geoderma, 130 2006, 1573 - 1586.

  6. Advanced gasification-based biomass power generation

    SciTech Connect

    Williams, R.H.; Larson, E.D.

    1993-12-31

    A promising strategy for modernizing bioenergy is the production of electricity or the cogeneration of electricity and heat using gasified biomass with advanced conversion technologies. Major advances that have been made in coal gasification technology, to marry the gas turbine to coal, are readily adaptable to biomass applications. Integrating biomass gasifiers with aeroderivative gas turbines in particular makes it possible to achieve high efficiencies and low unit capital costs at the modest scales required for bioenergy systems. Electricity produced with biomass-integrated gasifier/gas turbine (BIG/GT) power systems not only offers major environmental benefits but also would be competitive with electricity produced from fossil fuels and nuclear energy under a wide range of circumstances. Initial applications will be with biomass residues generated in the sugarcane, pulp and paper, and other agro- and forest-product industries. Eventually, biomass grown for energy purposes on dedicated energy farms will also be used to fuel these gas turbine systems. Continuing improvements in jet engine and biomass gasification technologies will lead to further gains in the performance of BIG/GT systems over the next couple of decades. Fuel cells operated on gasified biomass offer the promise of even higher performance levels in the period beyond the turn of the century. 79 refs., 21 figs., 11 tabs.

  7. Enthanol fuels from biomass projects

    NASA Astrophysics Data System (ADS)

    Hsieh, B. C. B.

    About 100 projects are proposed or underway to convert organic crops such as corn and grains or waste organic material into a clean usable ethyl alcohol fuel. Total production capacity could reach more than two billion gallons per year in 1985, excluding beverage and industrial uses. Congressional appropriation of approximately one-half billion dollars to DOE/USDA for loan guarantees and federal and state laws exempting excise taxes can make this ethanol fuel from biomass possible. An overview and status of the projects will be reviewed. Net energy production of ethyl alcohol from biomass and the impacts of increasing alcohol fuel use will also be discussed.

  8. Hydropyrolysis of biomass to produce liquid hydrocarbon fuels. Report on Energy Tree Farm Workshop No. 2, Hilo, Hawaii, June 1982

    SciTech Connect

    Troy, M.

    1982-11-01

    Results of the workshop show that a eucalyptus tree plantation, including a small nursery to produce the seedlings not available from the Waimea State Tree Nursery, could be established on 12,000 acres of Puna Sugar Company land. At approximately six years of age, the trees could be harvested, chipped, and burned in the renovated Puna Sugar Company's bagasse boiler to generate electricity. The cost of a bone dry ton of chips would be $37 if a real money rate of 3% is assumed, and $50 at a real money rate of 8%. Electricity could be produced at 7.7 cents per kWh assuming a 3% real money rate, and at 9.8 cents per kWh at an 8% rate. This workshop included an evaluation of soils at the selected Keeau site. Tree crop requirements were matched with soil and other environmental characteristics such as rainfall, altitude, and temperature. Leucaena Leucocephala, L. diversifolia, Eucalyptus saligna, E. grandis, and E. robusta were among the primary species considered, and based upon known environmental requirements and previous experience, E. grandis was selected. A conservative yield estimate for E. grandis at the specified site is 10 bone dry tons (20 green tons)/acre/year of total biomass. The 12,000 acre area would be planted continuously over period of six years at an annual production rate of 2000 acres per year. Spacing would be 6x6, or 1210 trees per acre, which, including a 10% seedling discard rate, would bring the total number of seedlings required to 2.7 million/year. Harvesting operations would begin in the 7th year, and three coppice crops would be harvested before replanting became necessary again. For the production of 120,000 bone dry tons (240,000 green tons) per year, four separate harvesting systems would be needed. Each would consist of 1 mobile whole tree chipper, 2 tracked feller-bunchers, 3 rubber-tired and tracked grapple skidders, 2 truck trailers, 3 chip vans, and 1 D-4 dozer. 10 figures, 31 tables.

  9. Assessment of Biomass Resources in Liberia

    SciTech Connect

    Milbrandt, A.

    2009-04-01

    Biomass resources meet about 99.5% of the Liberian population?s energy needs so they are vital to basic welfare and economic activity. Already, traditional biomass products like firewood and charcoal are the primary energy source used for domestic cooking and heating. However, other more efficient biomass technologies are available that could open opportunities for agriculture and rural development, and provide other socio-economic and environmental benefits.The main objective of this study is to estimate the biomass resources currently and potentially available in the country and evaluate their contribution for power generation and the production of transportation fuels. It intends to inform policy makers and industry developers of the biomass resource availability in Liberia, identify areas with high potential, and serve as a base for further, more detailed site-specific assessments.

  10. IMPROVING BIOMASS LOGISTICS COST WITHIN AGRONOMIC SUSTAINABILITY CONSTRAINTS AND BIOMASS QUALITY TARGETS

    SciTech Connect

    J. Richard Hess; Kevin L. Kenney; Christopher T. Wright; David J. Muth; William Smith

    2012-10-01

    Equipment manufacturers have made rapid improvements in biomass harvesting and handling equipment. These improvements have increased transportation and handling efficiencies due to higher biomass densities and reduced losses. Improvements in grinder efficiencies and capacity have reduced biomass grinding costs. Biomass collection efficiencies (the ratio of biomass collected to the amount available in the field) as high as 75% for crop residues and greater than 90% for perennial energy crops have also been demonstrated. However, as collection rates increase, the fraction of entrained soil in the biomass increases, and high biomass residue removal rates can violate agronomic sustainability limits. Advancements in quantifying multi-factor sustainability limits to increase removal rate as guided by sustainable residue removal plans, and mitigating soil contamination through targeted removal rates based on soil type and residue type/fraction is allowing the use of new high efficiency harvesting equipment and methods. As another consideration, single pass harvesting and other technologies that improve harvesting costs cause biomass storage moisture management challenges, which challenges are further perturbed by annual variability in biomass moisture content. Monitoring, sampling, simulation, and analysis provide basis for moisture, time, and quality relationships in storage, which has allowed the development of moisture tolerant storage systems and best management processes that combine moisture content and time to accommodate baled storage of wet material based upon “shelf-life.” The key to improving biomass supply logistics costs has been developing the associated agronomic sustainability and biomass quality technologies and processes that allow the implementation of equipment engineering solutions.

  11. Sorghum Mutant Library as a Genetic Resource to Improve Biomass Yield and BioEnergy Conversion Efficiency

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Due to the dwindling of mineral energy resources and soaring fuel price, agriculture sector is called to provide bioenergy in addition to the traditional role of providing humanity with food, fiber, and feed. Freshwater is likely a major challenge for developing biofuels because the trend of global ...

  12. Analysis of Competitiveness and Support Instruments for Heat and Electricity Production from Wood Biomass in Latvia

    NASA Astrophysics Data System (ADS)

    Klavs, G.; Kudrenickis, I.; Kundzina, A.

    2012-01-01

    Utilisation of renewable energy sources is one of the key factors in a search for efficient ways of reducing the emissions of greenhouse gases and improving the energy supply security. So far, the district heating supply in Latvia has been based on natural gas, with the wood fuel playing a minor role; the same is true for decentralised combined heat-power (CHP) production. The paper describes a method for evaluation of the economic feasibility of heat and electricity production from wood biomass under the competition between different fuel types and taking into account the electricity market. For the simulation, a cost estimation model is applied. The results demonstrate that wood biomass can successfully be utilised for competitive heat production by boiler houses, while for electricity production by CHP utilities it cannot compete on the market (even despite the low prices on wood biomass fuel) unless particular financial support instruments are applied. The authors evaluate the necessary support level and the impact of two main support instruments - the investment subsidies and the feed-in tariff - on the economic viability of wood-fuelled CHP plants, and show that the feed-in tariff could be considered as an instrument strongly affecting the competitiveness of such type CHP. Regarding the feed-in tariff determination, a compromise should be found between the economy-dictated requirement to develop CHP projects concerning capacities above 5 MWel - on the one hand, and the relatively small heat loads in many Latvian towns - on the other.

  13. Energy Management System (EMS) study, Fort Belvoir, Virginia, Department of the Army, Baltimore District, Corps of Engineers; executive summary. Final report

    SciTech Connect

    Prescott, E.Y.

    1995-11-01

    General Location; Fort Belvoir is an 8,656 acre Post held fee simple by the US Army. It is located in the Commonwealth of Virginia, 14 miles south of Washington, D.C., situated primarily on a peninsula of the Potomac River. Interstate 95 and US Route 1 provide primary transportation links to Norfolk, Washington, DC, and other cities. Fort Belvoir is an Army Installation under the Command of the United States Military District of Washington (MDW). Installation Mission: Since 1988 and its transfer to the MDW, Fort Belvoir`s mission has shifted from training to service to MDW and the National Capitol Region (NCR). Within its eight mission elements are: contingency military support to the NCR, Regional Administrative Center, Regional Logistics Support, Regional Recreation Center, Classroom Center, Housing and other regional activities. The Installation is now referred to as `U.S. Army Fort Belvoir`. Ft. Belvoir has been tasked, by Executive Order 12902, with reducing the total energy consumption on the Installation by 30% of the FY1985 level by the year FY2005. The purpose of this study is to determine the most effective Energy Management Systems (EMS) to install to assist in meeting this challenge. The analysis performed was based upon five buildings of different function, occupancy and scheduling, as well as different types of mechanical systems. Three different EMS types were analyzed for their advantages and applicability to each building. The results of this study are to be used to evaluate other buildings on the Installation. The three types of systems analyzed for this study are the FM Relay (FMR), the Power Line Carrier (PLC) and the Direct Digital Control (DDC) Systems.

  14. Biomass power for rural development. Revised design report.

    SciTech Connect

    Neuhauser, Edward

    1999-10-03

    The retrofit of Dunkirk Steam Station to fire biomass fuels is an important part of the Consortium's goal--demonstrating the viability of commercial scale willow energy crop production and conversion to power. The goal for th biomass facilities at Dunkirk is to reliably cofire a combination of wood wastes and willow biomass with coal at approximately 20% by heat input.

  15. Evaluating local crop residue biomass supply: Economic and environmental impacts

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The increasing interest in energy production from biomass requires a better understanding of potential local production and environmental impacts. This information is needed by local producers, biomass industry, and other stakeholders, and for larger scale analyses. This study models biomass product...

  16. 2011 Biomass Program Platform Peer Review: Feedstock

    SciTech Connect

    McCann, Laura

    2012-02-01

    This document summarizes the recommendations and evaluations provided by an independent external panel of experts at the 2011 U.S. Department of Energy Biomass Program’s Feedstock Platform Review meeting.

  17. 2011 Biomass Program Platform Peer Review: Analysis

    SciTech Connect

    Haq, Zia

    2012-02-01

    This document summarizes the recommendations and evaluations provided by an independent external panel of experts at the 2011 U.S. Department of Energy Biomass Program’s Analysis Platform Review meeting.

  18. 2011 Biomass Program Platform Peer Review. Sustainability

    SciTech Connect

    Eng, Alison Goss

    2012-02-01

    This document summarizes the recommendations and evaluations provided by an independent external panel of experts at the 2011 U.S. Department of Energy Biomass Program’s Sustainability Platform Review meeting.

  19. 2011 Biomass Program Platform Peer Review: Algae

    SciTech Connect

    Yang, Joyce

    2012-02-01

    This document summarizes the recommendations and evaluations provided by an independent external panel of experts at the 2011 U.S. Department of Energy Biomass Program’s Algae Platform Review meeting.

  20. 2011 Biomass Program Platform Peer Review. Infrastructure

    SciTech Connect

    Lindauer, Alicia

    2012-02-01

    This document summarizes the recommendations and evaluations provided by an independent external panel of experts at the 2011 U.S. Department of Energy Biomass Program’s Infrastructure Platform Review meeting.