Science.gov

Sample records for cetyl trimethyl ammonium

  1. Investigating Two-Photon-Induced Fluorescence in Rhodamine-6G in Presence of Cetyl-Trimethyl-Ammonium-Bromide.

    PubMed

    Maurya, Sandeep Kumar; Yadav, Dheerendra; Goswami, Debabrata

    2016-09-01

    We investigate the effect of cetyl-trimethyl-ammonium-bromides (CTAB) concentration on the fluorescence of Rhodamine-6G in water. This spectroscopic study of Rhodamine-6G in presence of CTAB was performed using two-photon-induced-fluorescence at 780 nm wavelength using high repetition rate femtosecond laser pulses. We report an increment of ∼10 % in the fluorescence in accordance with ∼12 % enhancement in the absorption intensity of the dye molecule around the critical micellar concentration. We discuss the possible mechanism for the enhancement in the two-photon fluorescence intensity and the importance of critical micellar concentration. PMID:27324955

  2. Effect of cetyl trimethyl ammonium bromide concentration on structure, morphology and carbon dioxide adsorption capacity of calcium hydroxide based sorbents

    NASA Astrophysics Data System (ADS)

    Hlaing, Nwe Ni; Vignesh, K.; Sreekantan, Srimala; Pung, Swee-Yong; Hinode, Hirofumi; Kurniawan, Winarto; Othman, Radzali; Thant, Aye Aye; Mohamed, Abdul Rahman; Salim, Chris

    2016-02-01

    Calcium hydroxide (Ca(OH)2) has been proposed as an important material for industrial, architectural, and environmental applications. In this study, calcium acetate was used as a precursor and cetyl trimethyl ammonium bromide (CTAB) was used as a surfactant to synthesize Ca(OH)2 based adsorbents for carbon dioxide (CO2) capture. The effect of CTAB concentration (0.2-0.8 M) on the structure, morphology and CO2 adsorption performance of Ca(OH)2 was studied in detail. The synthesized samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), BET surfaced area and thermogravimetry-differential thermal analysis (TG-DTA) techniques. The phase purity, crystallite size, Brunauer-Emmett-Teller (BET) surface area and CO2 adsorption performance of Ca(OH)2 precursor adsorbents were significantly increased when the concentration of CTAB was increased. XRD results showed that pure Ca(OH)2 phase was obtained at the CTAB concentration of 0.8 M. TGA results exhibited that 0.8 M of CTAB-assisted Ca(OH)2 precursor adsorbent possessed a residual carbonation conversion of ∼56% after 10 cycles.

  3. Enhanced adsorption of congo red from aqueous solutions by chitosan hydrogel beads impregnated with cetyl trimethyl ammonium bromide.

    PubMed

    Chatterjee, Sudipta; Lee, Dae S; Lee, Min W; Woo, Seung H

    2009-06-01

    The adsorption of congo red (CR) onto chitosan (CS) beads impregnated by a cationic surfactant (CTAB, cetyl trimethyl ammonium bromide) was investigated. Chitosan beads impregnated at a ratio of 1/20 of CTAB to CS (0.05% of CTAB and 1% of CS) increased the CR adsorption capacity by 2.2 times from 162.3 mg/g (0% CTAB) to 352.5 mg/g (0.05% CTAB). The CR adsorption decreased with an increase in pH of the CR solution from 4.0 to 9.0. The Sips isotherm model showed a good fit with the equilibrium experimental data and the values of the heterogeneity factor (n) indicated heterogeneous adsorption of CR onto CS/CTAB beads, as well as CS beads. The kinetic data showed better fit to the pseudo second-order rate model than to the pseudo first-order rate model. The impregnation of CS beads by cationic surfactants showed the highest adsorption capacities of CR compared to any other adsorbents and would be a good method to increase adsorption efficiency for the removal of anionic dyes in a wastewater treatment process. PMID:19208471

  4. Synergistic inhibition behavior between indigo carmine and cetyl trimethyl ammonium bromide on carbon steel corroded in a 0.5 M HCl solution

    NASA Astrophysics Data System (ADS)

    Zhang, Zhe; Tian, Ningchen; Li, Xiuying; Zhang, Lingzhi; Wu, Ling; Huang, Yan

    2015-12-01

    This work reports on a newly observed synergistic inhibition between indigo carmine and cetyl trimethyl ammonium bromide (CTAB) on 1045 carbon steel (CS) corroded in a 0.5 M HCl solution. The results of electrochemical measurements showed that CTAB could change indigo carmine in a manner that would accelerate corrosion and produce an effective inhibitor. The maximal protection efficiency was significantly greater than 0.985, with the concentration of the combination inhibitors reaching approximately 5 × 10-5 M. The microstructure of the CS corrosion surface demonstrated that the indigo disulfonate anions and cetyltrimethylammonium cations were adsorbed simultaneously on the CS surface to protect it from corrosion. Diffusion coefficient analysis and the surface concentration profiles of the corrosive species were used to investigate the synergistic effect of the indigo carmine/CTAB combination inhibitors, and the results demonstrate the existence of synergy.

  5. Complete dechlorination of 2,4-dichlorophenol in aqueous solution on palladium/polymeric pyrrole-cetyl trimethyl ammonium bromide/foam-nickel composite electrode.

    PubMed

    Sun, Zhirong; Wei, Xuefeng; Han, Yanbo; Tong, Shan; Hu, Xiang

    2013-01-15

    The electrochemically reductive dechlorination of 2,4-dichlorophenol (2,4-DCP) in aqueous solution on palladium/polymeric pyrrole-cetyl trimethyl ammonium bromide/foam-nickel electrode (Pd/PPy-CTAB/foam-Ni electrode) was investigated in this paper. Pd/PPy-CTAB/foam-Ni electrode was prepared and characterized by cyclic voltammetry (CV), scanning electron microscope (SEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) adsorption and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The influences of some experimental factors such as the dechlorination current, dechlorination time and the initial pH on the removal efficiency and the current efficiency of 2,4-DCP dechlorination on Pd/PPy-CTAB/foam-Ni electrode were studied. Complete removal of 2,4-DCP was achieved and the current efficiency of 47.4% could be obtained under the conditions of the initial pH of 2.2, the dechlorination current of 5 mA and the dechlorination time of 50 min when the initial 2,4-DCP concentration was 100 mg L(-1). The analysis of high performance liquid chromatography (HPLC) identified that the intermediate products were 2-chlorophenol (2-CP) and 4-chlorophenol (4-CP). The final products were mainly phenol. Its further reduction product cyclohexanone was also detected. The electrocatalytic dechlorination pathways of 2,4-DCP on Pd/PPy-CTAB/foam-Ni electrode were discussed. The stability of the electrode was favorable that it could keep dechlorination efficiency at 100% after having been reused 10 times. Results revealed that the stable prepared Pd/PPy-CTAB/foam-Ni electrode presented a good application prospect in dechlorination process with high effectiveness and low cost. PMID:23270952

  6. A novel dodine-free selective medium based on the use of cetyl trimethyl ammonium bromide (CTAB) to isolate Beauveria bassiana, Metarhizium anisopliae sensu lato and Paecilomyces lilacinus from soil.

    PubMed

    Posadas, Julieta B; Comerio, Ricardo M; Mini, Jorge I; Nussenbaum, Ana L; Lecuona, Roberto E

    2012-01-01

    This study evaluated the quaternary ammonium compound cetyl trimethyl ammonium bromide (CTAB) as an alternative to the chemically related dodecylguanidine (dodine) for the selective isolation of entomopathogenic fungi. Oatmeal agar (OA) with chloramphenicol was used as basal medium, and three concentrations of CTAB (0.5, 0.6, 0.7 g/L) were evaluated and compared against OA + 0.46 g/L dodine. Selective isolation and growth studies were performed with the entomopathogens Beauveria bassiana, Metarhizium anisopliae s.l. and Paecilomyces lilacinus and five common non-entomopathogenic non-target species. The three entomopathogenic fungi sporulated earlier on OA + 0.6 g/L CTAB than on OA + 0.46 g/L dodine, while none of the non-target fungi sporulated on OA + 0.6 g/L CTAB. All entomopathogenic fungal isolates grew on OA + 0.6 g/L CTAB, despite some intra-species variation, whereas non-target fungi showed no growth or sporulation. OA + 0.6 g/L CTAB resulted in an efficient medium to isolate B. bassiana, M. anisopliae s. l. and P. lilacinus from soil samples. Results of our study suggest that OA + 0.6 g/L CTAB is a suitable, simple and inexpensive to prepare medium to replace OA + 0.46 g/L dodine for the selective isolation of these fungi. PMID:22314588

  7. N-Acetyl Cysteine (NAC)-Directed Detoxification of Methacryloxylethyl Cetyl Ammonium Chloride (DMAE-CB)

    PubMed Central

    Shan, Lequn; Wang, Yingjie; Tian, Min; Yang, Yanwei; Sun, Jinlong; Ban, Jinghao; Chen, Jihua

    2015-01-01

    Methacryloxylethyl cetyl ammonium chloride (DMAE-CB) is a polymerizable antibacterial monomer and has been proved as an effective strategy to achieve bioactive bonding with reliable bacterial inhibitory effects. However, the toxicity of DMAE-CB may hamper its wide application in clinical situations. Thus, this study was designed to investigate the toxicity of DMAE-CB and explore the possible protective effects of N-acetyl cysteine (NAC). High performance liquid chromatography (HPLC) and liquid chromatography-mass spectrometry (LC-MS) analysis showed that chemical binding of NAC and DMAE-CB occurred in a time dependent manner. Pre-incubation of fourty-eight hours is required for adequate reaction between DMAE-CB and NAC. DMAE-CB reduced human dental pulp cells (hDPCs) viability in a dose-dependent manner. The toxic effects of DMAE-CB were accompanied by increased reactive oxygen species (ROS) level and reduced glutathione (GSH) content. NAC alleviated DMAE-CB-induced oxidative stress. Annexin V/ Propidium Iodide (PI) staining and Hoechst 33342 staining indicated that DMAE-CB induced apoptosis. Collapsed mitochondrial membrane potential (MMP) and activation of caspase-3 were also observed after DMAE-CB treatment. NAC rescued hDPCs from DMAE-CB-induced apoptosis, accompanied by lower level of MMP loss and caspase-3 activity. This study assists to elucidate the mechanism underlying the cytotoxic effects of DMAE-CB and provides theoretical supports for the searching of effective strategies to reduce toxicity of quaternary ammonium dental monomers. PMID:26274909

  8. Methacryloxylethyl Cetyl Ammonium Chloride Induces DNA Damage and Apoptosis in Human Dental Pulp Cells via Generation of Oxidative Stress

    PubMed Central

    Jiao, Yang; Ma, Sai; Wang, Yirong; Li, Jing; Shan, Lequn; Sun, Jinlong; Chen, Jihua

    2016-01-01

    The polymerizable antibacterial monomer methacryloxylethyl cetyl ammonium chloride (DMAE-CB) has provided an effective strategy to combat dental caries. However, the application of such material raises the question about the biological safety and the question remains open. The mechanism of this toxic action, however, is not yet clearly understood. The present study aims at providing novel insight into the possible causal link between cellular oxidative stress and DNA damage, as well as apoptosis in human dental pulp cells exposed to DMAE-CB. The enhanced formation of reactive oxygen species and depletion of glutathione, as well as differential changes in activities of superoxide dismutase, glutathione peroxidase, and catalase in DMAE-CB-treated cells indicated oxidative stress. By using substances that can alter GSH synthesis, we found that GSH was the key component in the regulation of cell response towards oxidative stress induced by DMAE-CB. The increase in oxidative stress-sensitive 8-Oxo-2'-deoxyguanosine (8-OHdG) content, formation of γ-H2AX and cell cycle G1 phase arrest indicated that DNA damage occurred as a result of the interaction between DNA base and ROS beyond the capacities of antioxidant mechanisms in cells exposed to DMAE-CB. Such oxidative DNA damage thus triggers the activation of ataxia telangiectasia-mutated (ATM) signaling, the intrinsic apoptotic pathway, and destruction of mitochondrial morphology and function. PMID:27143955

  9. Methacryloxylethyl Cetyl Ammonium Chloride Induces DNA Damage and Apoptosis in Human Dental Pulp Cells via Generation of Oxidative Stress.

    PubMed

    Jiao, Yang; Ma, Sai; Wang, Yirong; Li, Jing; Shan, Lequn; Sun, Jinlong; Chen, Jihua

    2016-01-01

    The polymerizable antibacterial monomer methacryloxylethyl cetyl ammonium chloride (DMAE-CB) has provided an effective strategy to combat dental caries. However, the application of such material raises the question about the biological safety and the question remains open. The mechanism of this toxic action, however, is not yet clearly understood. The present study aims at providing novel insight into the possible causal link between cellular oxidative stress and DNA damage, as well as apoptosis in human dental pulp cells exposed to DMAE-CB. The enhanced formation of reactive oxygen species and depletion of glutathione, as well as differential changes in activities of superoxide dismutase, glutathione peroxidase, and catalase in DMAE-CB-treated cells indicated oxidative stress. By using substances that can alter GSH synthesis, we found that GSH was the key component in the regulation of cell response towards oxidative stress induced by DMAE-CB. The increase in oxidative stress-sensitive 8-Oxo-2'-deoxyguanosine (8-OHdG) content, formation of γ-H2AX and cell cycle G1 phase arrest indicated that DNA damage occurred as a result of the interaction between DNA base and ROS beyond the capacities of antioxidant mechanisms in cells exposed to DMAE-CB. Such oxidative DNA damage thus triggers the activation of ataxia telangiectasia-mutated (ATM) signaling, the intrinsic apoptotic pathway, and destruction of mitochondrial morphology and function. PMID:27143955

  10. Bis(trimethyl-phenyl-ammonium) tetra-bromidobis(4-chloro-phen-yl)stannate(IV).

    PubMed

    Lo, Kong Mun; Ng, Seik Weng

    2009-01-01

    The Sn(IV) atom in the title salt, [N(CH(3))(3)(C(6)H(5))](2)[SnBr(4)(C(6)H(4)Cl)(2)], exists in a distorted all-trans SnC(2)Br(4) octa-hedral geometry. The Sn(IV) atom lies on a center of inversion. Weak inter-molecular C-H⋯Br hydrogen bonding is observed between trimethyl-phenyl-ammonium cations and the Sn complex anion in the crystal structure. PMID:21578684

  11. Interaction between DNA and Trimethyl-Ammonium Bromides with Different Alkyl Chain Lengths

    PubMed Central

    Cheng, Chao; Ran, Shi-Yong

    2014-01-01

    The interaction between λ—DNA and cationic surfactants with varying alkyl chain lengths was investigated. By dynamic light scattering method, the trimethyl-ammonium bromides-DNA complex formation was shown to be dependent on the length of the surfactant's alkyl chain. For surfactants with sufficient long alkyl chain (CTAB, TTAB, DTAB), the compacted particles exist with a size of ~60–110 nm at low surfactant concentrations. In contrast, high concentration of surfactants leads to aggregates with increased sizes. Atomic force microscope scanning also supports the above observation. Zeta potential measurements show that the potential of the particles decreases with the increase of surfactant concentration (CTAB, TTAB, DTAB), which contributes much to the coagulation of the particles. For OTAB, the surfactant with the shortest chain in this study, it cannot fully neutralize the charges of DNA molecules; consequently, the complex is looser than other surfactant-DNA structures. PMID:24574926

  12. Introduction of poly[(2-acryloyloxyethyl trimethyl ammonium chloride)-co-(acrylic acid)] branches onto starch for cotton warp sizing.

    PubMed

    Shen, Shiqi; Zhu, Zhifeng; Liu, Fengdan

    2016-03-15

    An attempt has been made to reveal the effect of amphoteric poly(2-acryloyloxyethyl trimethyl ammonium chloride-co-acrylic acid) [P(ATAC-co-AA)] branches grafted onto the backbones of starch upon the adhesion-to-cotton, film properties, and desizability of maize starch for cotton warp sizing. Starch-g-poly[(2-acryloyloxyethyl trimethyl ammonium chloride)-co-(acrylic acid) [S-g-P(ATAC-co-AA)] was prepared by the graft copolymerization of 2-acryloyloxyethyl trimethyl ammonium chloride (ATAC) and acrylic acid (AA) with acid-converted starch (ACS) in aqueous medium using Fe(2+)-H2O2 initiator. The adhesion was evaluated in term of bonding strength according to the FZ/T 15001-2008 whereas the film properties considered included tensile strength, work and percentage elongation at break. The evaluation was undertaken through the comparison of S-g-P(ATAC-co-AA) with ACS, starch-g-poly(acrylic acid), and starch-g-poly(2-acryloyloxyethyl trimethyl ammonium chloride). It was found that the amphoteric branch was able to significantly improve the adhesion and mitigate the brittleness of starch film. Zeta potential of cooked S-g-P(ATAC-co-AA) paste, depending on the mole ratio of ATAC to AA units on P(ATAC-co-AA) branches, had substantial effect on the adhesion and desizability. Increasing the mole ratio raised the potential, which favored the adhesion but disfavored the removal of S-g-P(ATAC-co-AA) from sized cotton warps. Electroneutral S-g-P(ATAC-co-AA) was superior to negatively grafted starch in adhesion and to positively grafted starch in desizability. Generally, it showed better sizing property than ACS, starch-g-poly(acrylic acid), and starch-g-poly(2-acryloyloxyethyl trimethyl ammonium chloride), and had potential in the application of cotton warp sizing. PMID:26794764

  13. Corrosion mitigation of N-(2-hydroxy-3-trimethyl ammonium)propyl chitosan chloride as inhibitor on mild steel.

    PubMed

    Sangeetha, Y; Meenakshi, S; SairamSundaram, C

    2015-01-01

    The biopolymer N-(2-hydroxy-3-trimethyl ammonium)propyl chitosan chloride (HTACC) was synthesised and its influence as a novel corrosion inhibitor on mild steel in 1M HCl was studied using gravimetric and electrochemical experiments. The compound obtained was characterised using FTIR and NMR studies. The inhibition efficiency increased with the increase in concentration and reached a maximum of 98.9% at 500 ppm concentration. Polarisation studies revealed that HTACC acts both as anodic and cathodic inhibitor. Electrochemical impedance studies confirmed that the inhibition is through adsorption on the metal surface. The extent of inhibition exhibits a negative trend with increase in temperature. Langmuir isotherm provides the best description on the adsorption nature of the inhibitor. SEM analysis indicated the presence of protective film formed by the inhibitor on the metal surface. PMID:25450546

  14. Removal of As(V), Cr(III) and Cr(VI) from aqueous environments by poly(acrylonitril-co-acrylamidopropyl-trimethyl ammonium chloride)-based hydrogels.

    PubMed

    Dudu, Tuba Ersen; Sahiner, Mehtap; Alpaslan, Duygu; Demirci, Sahin; Aktas, Nahit

    2015-09-15

    Cationic poly(Acrylonitril-co-Acrylamidopropyl-trimethyl Ammonium Chloride) (p(AN-co-APTMACl)) hydrogels in bulk were synthesized by using acrylonitrile (AN) and 3-acrylamidopropyl-trimethyl ammonium chloride (APTMACl) as monomers. The prepared hydrogels were exposed to amidoximation reaction to replace hydrophobic nitrile groups with hydrophilic amidoxime groups that have metal ion binding ability. Those replacements were increased the hydrogels absorption capacity for As(V) and Cr(VI). Langmuir and Freundlich isotherms equations were utilized to obtain the best-fitted isotherm model for the absorption of the ions at different metal ion concentrations. The absorption data of As(V) ion were fitted well to Freundlich isotherm while those of Cr(VI) and Cr(III) ions were fitted well to Langmuir isotherm. The maximum absorption of poly(3-acrylamidopropyl-trimethyl ammonium chloride (p(APTMACl)) and amid-p(AN-co-APTMACl) macro gels were 22.39 mg and 21.83 mg for As(V), and 30.65 mg and 18.16 mg for Cr(VI) ion per unit gram dried gel, respectively. Kinetically, the absorption behaviors of Cr(III) and Cr(VI) ions were fitted well to a pseudo 2nd-order kinetic model and those of As(V) ions were fitted well to a pseudo 1st order kinetic model. PMID:26188989

  15. A comparative study on the thermophysical properties for two bis[(trifluoromethyl)sulfonyl]imide-based ionic liquids containing the trimethyl-sulfonium or the trimethyl-ammonium cation in molecular solvents.

    PubMed

    Couadou, Erwan; Jacquemin, Johan; Galiano, Hervé; Hardacre, Christopher; Anouti, Mérièm

    2013-02-01

    Herein, we present a comparative study of the thermophysical properties of two homologous ionic liquids, namely, trimethyl-sulfonium bis[(trifluoromethyl)sulfonyl]imide, [S(111)][TFSI], and trimethyl-ammonium bis[(trifluoromethyl)sulfonyl]imide, [HN(111)][TFSI], and their mixtures with propylene carbonate, acetonitrile, or gamma butyrolactone as a function of temperature and composition. The influence of solvent addition on the viscosity, conductivity, and thermal properties of IL solutions was studied as a function of the solvent mole fraction from the maximum solubility of IL, x(s), in each solvent to the pure solvent. In this case, x(s) is the composition corresponding to the maximum salt solubility in each liquid solvent at a given temperature from 258.15 to 353.15 K. The effect of temperature on the transport properties of each binary mixture was then investigated by fitting the experimental data using Arrhenius' law and the Vogel-Tamman-Fulcher (VTF) equation. The experimental data shows that the residual conductivity at low temperature, e.g., 263.15 K, of each binary mixture is exceptionally high. For example, conductivity values up to 35 and 42 mS·cm(-1) were observed in the case of the [S(111)][TFSI] + ACN and [HN(111)][TFSI] + ACN binary mixtures, respectively. Subsequently, a theoretical approach based on the conductivity and on the viscosity of electrolytes was formulated by treating the migration of ions as a dynamical process governed by ion-ion and solvent-ion interactions. Within this model, viscosity data sets were first analyzed using the Jones-Dole equation. Using this theoretical approach, excellent agreement was obtained between the experimental and calculated conductivities for the binary mixtures investigated at 298.15 K as a function of the composition up to the maximum solubility of the IL. Finally, the thermal characterization of the IL solutions, using DSC measurements, showed a number of features corresponding to different solid

  16. Spectroscopic studies on the competitive interaction between polystyrene sodium sulfonate with polycations and the N-tetradecyl trimethyl ammonium bromide surfactant.

    PubMed

    Estrela-Lopis, I; Iturri Ramos, J J; Donath, E; Moya, S E

    2010-01-14

    The interaction of N-tetradecyl trimethyl ammonium bromide (TTAB) surfactants with poly(sodium styrene sulfonate) (PSS), PSS/poly(allylamine hydrochloride) (PAH), and PSS/poly(diallyl dimethyl ammonium chloride) (PDADMAC) complexes has been studied by means of Raman and IR spectroscopy. The stoichiometry of the polyelectrolyte complexes and of the complexes with TTAB has been established. TTAB molecules bind to single PSS molecules in a coiled liquid-like alkyl configuration up to a molar fraction of 67% in dry state. At higher concentrations, TTAB shows a transition to a crystalline phase. In the case of PSS being complexed with PAH, surfactant binds to PSS with a stoichiometry of 2 molecules of TTAB per sulfonic acid group. Spectroscopic data show that TTAB interacting with PSS/PDADMAC complexes is capable of disassembling this polyelectrolyte complex, but when TTAB interacts with the PSS/PAH complexes this polyelectrolyte pair remains stable. Spectroscopic measurements performed at different humidity showed that dry PSS/PAH complexes display the nu(SO(2)) and nu(s)(SO(3)(-)) bands at positions, which are indicative of the presence of hydrogen bonds between PSS and PAH. Red shifts of these bands when mixing the PSS/PAH complexes with TTAB point to structural rearrangements of the complex when interacting with the surfactant. PMID:19938865

  17. Electrodialytic Transport Properties of Anion-Exchange Membranes Prepared from Poly(vinyl alcohol) and Poly(vinyl alcohol-co-methacryloyl aminopropyl trimethyl ammonium chloride)

    PubMed Central

    Jikihara, Atsushi; Ohashi, Reina; Kakihana, Yuriko; Higa, Mitsuru; Kobayashi, Kenichi

    2012-01-01

    Random-type anion-exchange membranes (AEMs) have been prepared by blending poly(vinyl alcohol) (PVA) and the random copolymer-type polycation, poly(vinyl alcohol-co-methacryloyl aminopropyl trimethyl ammonium chloride) at various molar percentages of anion-exchange groups to vinyl alcohol groups, Cpc, and by cross-linking the PVA chains with glutaraldehyde (GA) solution at various GA concentrations, CGA. The characteristics of the random-type AEMs were compared with blend-type AEMs prepared in our previous study. At equal molar percentages of the anion exchange groups, the water content of the random-type AEMs was lower than that of the blend-type AEMs. The effective charge density of the random-type AEMs increased with increasing Cpc and reached a maximum value. Further, the maximum value of the effective charge density increased with increasing CGA. The maximum value of the effective charge density, 0.42 mol/dm3, was obtained for the random-type AEM with Cpc = 4.2 mol % and CGA = 0.15 vol %. A comparison of the random-type and blend-type AEMs with almost the same Cpc showed that the random-type AEMs had lower membrane resistance than the blend-type ones. The membrane resistance and dynamic transport number of the random-type AEM with Cpc = 6.0 mol % and CGA = 0.15 vol % were 4.8 Ω cm2 and 0.83, respectively. PMID:24958543

  18. Theoretical study of the reaction of chitosan monomer with 2,3-epoxypropyl-trimethyl quaternary ammonium chloride catalyzed by an imidazolium-based ionic liquid.

    PubMed

    Mu, Xueli; Yang, Xiaodeng; Zhang, Dongju; Liu, Chengbu

    2016-08-01

    The molecular mechanism of the graft reaction of 2,3-epoxypropyl-trimethyl quaternary ammonium chloride with chitosan monomer was investigated by performing density functional theory (DFT) calculations. The calculated results show that the -NH2 group of chitosan monomer is more reactive than its -OH and -CH2OH groups, and the graft reaction on the -NH2 group is calculated to be exothermic by 20.5kcal/mol with a free energy barrier of 42.6kcal/mol. The reaction cannot benefit from the presence of the intruded water molecule, but can be considerably assisted by 1-allyl-3-methylimidazolium chloride ([Amim]Cl) ionic liquid. The reaction catalyzed by the ion-pair is calculated to be exothermic by 36.5kcal/mol and the barrier is reduced to 29.3kcal/mol, which are further corrected to 28.0 and 29.1kcal/mol by considering the solvent effect of [Amim]Cl ionic liquid. Calculated results verified the experimental finding that imidazolium-based ionic liquids can promote the reaction of chitosan with epoxy compounds. PMID:27112849

  19. Biological evaluation of N-2-hydroxypropyl trimethyl ammonium chloride chitosan as a carrier for the delivery of live Newcastle disease vaccine.

    PubMed

    Zhao, Kai; Sun, Yanwei; Chen, Gang; Rong, Guangyu; Kang, Hong; Jin, Zheng; Wang, Xiaohua

    2016-09-20

    Mucosal immune system plays a very important role in antiviral immune response. We prepared Newcastle disease viruses (NDV) encapsulated in N-2-hydroxypropyl trimethyl ammonium chloride chitosan (N-2-HACC) nanoparticles (NDV/La Sota-N-2-HACC-NPs) by an ionic cross linking method, and assessed the potential of N-2-HACC-NPs as a mucosal immune delivery carrier. The properties of the nanoparticles were determined by transmission electron microscopy, Zeta potential and particle size analysis, encapsulation efficiency and loading capacity. NDV/La Sota-N-2-HACC-NPs have regular spherical morphologies and high stability; with 303.88±49.8nm mean diameter, 45.77±0.75mV Zeta potential, 94.26±0.42% encapsulation efficiency and 54.06±0.21% loading capacity. In vitro release assay indicated that the release of NDV from NDV/La Sota-N-2-HACC-NPs is slow. The NDV/La Sota-N-2-HACC-NPs have good biological characteristics, very low toxicity and high level of safety. Additionally, specific pathogen-free chickens immunized with NDV/La Sota-N-2-HACC-NPs showed much stronger cellular, humoral and mucosal immune responses than commercial attenuated live Newcastle disease vaccine, and NDV/La Sota-N-2-HACC-NPs reached the sustainable release effect. Our study here provides a foundation for the further development of mucosal vaccines and drugs, and the N-2-HACC-NPs should be a potential drug delivery carrier with immense potential in medical applications. PMID:27261727

  20. Colorimetric response of dithizone product and hexadecyl trimethyl ammonium bromide modified gold nanoparticle dispersion to 10 types of heavy metal ions: understanding the involved molecules from experiment to simulation.

    PubMed

    Leng, Yumin; Li, Yonglong; Gong, An; Shen, Zheyu; Chen, Liang; Wu, Aiguo

    2013-06-25

    A new kind of analytical reagent, hexadecyl trimethyl ammonium bromide (CTAB), and dithizone product-modified gold nanoparticle dispersion, is developed for colorimetric response to 10 types of heavy metal ions (M(n+)), including Cr(VI), Cr(3+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), and Pb(2+). The color change of the modified gold nanoparticle dispersion is instantaneous and distinct for Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), and Pb(2+). The color change results from the multiple reasons, such as electronic transitions, cation-π interactions, formation of coordination bonds, and M(n+)-induced aggregation of gold nanoparticles (AuNPs). The different combining capacity of heavy metal ions to modifiers results in the different broadening and red-shifting of the plasmon peak of modified AuNPs. In addition, Cr(VI), Cu(2+), Co(2+), Ni(2+), and Mn(2+) cause the new UV-vis absorption peaks in the region of 360-460 nm. The interactions between the modifiers and AuNPs, and between the modifiers and M(n+), are investigated by using Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The results confirm that AuNPs are modified by CTAB and dithizone products through electrostatic interactions and Au-S bonds, respectively, and the M(n+)-N bonds form between M(n+) and dithizone products. Furthermore, the experimental and density functional theory calculated IR spectra prove that dithizone reacts with NaOH to produce C6H5O(-) and [SCH2N4](2-). The validation of this method is carried out by analysis of heavy metal ions in tap water. PMID:23724944

  1. Interaction of Lucifer yellow with cetyltrimethyl ammonium bromide micelles and the consequent suppression of its non-radiative processes

    NASA Astrophysics Data System (ADS)

    Mishra, Padmaja P.; Koner, Apurba L.; Datta, Anindya

    2004-12-01

    The interaction of the fluorophore Lucifer yellow with micelles has been monitored using steady state and time resolved fluorescence techniques. Contrary to the popular belief that the fluorophore is too polar to associate with the stern layer or hydrophobic core of micelles, we have observed that it binds with the micelles of the positively charged surfactant cetyl trimethyl ammonium bromide and that such interaction causes an decrease in the rates of its non-radiative processes. This phenomenon cannot be explained solely in the light of a reduced polarity, as we have demonstrated that the photophysics of Lucifer yellow is complex and intramolecular charge transfer does not seem to be the only excited state process that is operative.

  2. Use of a tritium release assay to measure 6-N-trimethyl-L-lysine hydroxylase activity: synthesis of 6-N-(3-/sup 3/H)Trimethyl-DL-lysine

    SciTech Connect

    Stein, R.; England, S.

    1981-09-01

    6-N-(3-/sup 3/H)Trimethyl-DL-lysine was synthesized from 6-N-acetyl-L-lysine by the following chemical scheme: 6-N-acetyl-L-lysine ..-->.. 2-keto-6-N-acetylcaproic acid ..-->.. 2-(3-/sup 3/H)keto-6-N-acetylcaproic acid ..-->.. 2-(3-/sup 3/H)keto-6-N-acetylcaproic acid oxime ..-->.. 6-N-(3-/sup 3/H)acetyl-DL-lysine ..-->.. DL-(3-/sup 3/H)lysine ..-->.. 2-N-(3-/sup 3/H)formyl-DL-lysine ..-->.. 2-(3-/sup 3/H)formyl-6-N-trimethyl-DL-lysine ..-->.. 6-N-(3-/sup 3/H)trimethyl-DL-lysine. Using a 70% ammonium sulfate fraction obtained from a high-speed rate kidney supernatant, the cosubstrate and cofactor requirements for 6-N-trimethyl-L-lysine hydroxylase activity as measured by tritium release from 6-N-(3-/sup 3/H)trimethyl-DL-lysine were: ..cap alpha..-ketoglutarate, ferrous ions, L-ascorbate, and oxygen, with added catalase showing a slight but distinct stimulatory effect. On incubation with the crude rat kidney preparation, the release of tritium from 6-N-(3-/sup 3/H)trimethyl-DL-lysine was linear with both time of incubation and protein concentration. Hydroxylation of 6-N-trimethyl-L-lysine, as measured by tritium release from the labeled substrate, was examined in rat kidney, heart, liver, and skeletal muscle tissues, and found to be most active in the kidney.

  3. Solvent-free enzymatic production of high quality cetyl esters.

    PubMed

    Serrano-Arnaldos, Mar; Máximo-Martín, María Fuensanta; Montiel-Morte, María Claudia; Ortega-Requena, Salvadora; Gómez-Gómez, Elisa; Bastida-Rodríguez, Josefa

    2016-04-01

    A solvent-free biocatalytic process for the synthesis of high quality cetyl laurate, myristate, palmitate and stearate has been optimized. This enzymatic procedure follows the fundamental principles of the Green Chemistry and lead to sustainable products, which can be labeled as natural and conform to the principal requirements for its use in high value-added goods. The four esters selected are the main components of spermaceti, a mixture of waxes very appreciated in cosmetic and pharmacy because of its physical properties and emolliency, which was formerly extracted from the head of the sperm whales. In this paper, the influence of the amount of biocatalyst, the commercially available Novozym(®) 435, and the temperature were studied in an open-air batch reactor before carrying out the synthesis in a high performance vacuum reactor with dry nitrogen input to shift the equilibrium towards product formation. Under optimal conditions, conversion was higher than 98.5 %. The characterization of the enzymatic cetyl esters puts in evidence that these are ultra-pure compounds, which have similar properties to the ones obtained through the conventional industrial processes with the extra benefit of being environmentally friendly. PMID:26801670

  4. Trimethyl-phenyl-ammonium dibromidotriphenyl-stannate(IV).

    PubMed

    Yap, Quai Ling; Lo, Kong Mun; Ng, Seik Weng

    2009-01-01

    The five-coordinate Sn atom in the title salt, [(CH(3))(3)(C(6)H(6))N][SnBr(2)(C(6)H(5))(3)], exists in a distorted trans-C(3)SnBr(2) trigonal-bipyramidal coordination geometry. In the crystal structure no obvious hydrogen bonding is observed. PMID:21582658

  5. Morphology Control of Zn-SiO2 Composite Films Electrodeposited from Aqueous Solution Containing Quaternary Ammonium Cations

    NASA Astrophysics Data System (ADS)

    Ohgai, T.; Ogushi, K.; Takao, K.

    2013-03-01

    Zn-SiO2 alloys were electrodeposited from acidic aqueous solution containing cationic surfactants such as diallyl-dimethyl-ammonium chloride, trimethyl-tetradecyl-ammonium chloride, trimethyl-stearyl-ammonium chloride and dimethyl-distearyl-ammonium chloride. Zn-SiO2 alloy thin films were obtained at the wide current density range from 5 A/dm2 to 100 A/dm2. SiO2 content in deposits was ca. 10 % at the maximum using the solution containing a surfactant with molecular weight range of 200 to 300.

  6. Ammonium acetate

    Integrated Risk Information System (IRIS)

    Ammonium acetate ; CASRN 631 - 61 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic

  7. Ammonium methacrylate

    Integrated Risk Information System (IRIS)

    Ammonium methacrylate ; CASRN 16325 - 47 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcin

  8. Ammonium sulfamate

    Integrated Risk Information System (IRIS)

    Ammonium sulfamate ; CASRN 7773 - 06 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogen

  9. [Quantitative aspects of the percutaneous uptake of wool wax alcohols (cetyl alcohol) and paraffins (octadecane) from different ointment bases].

    PubMed

    Zesch, A; Bauer, E

    1985-01-01

    Since topical vehicles are partly responsible for the effects of active agents--both the wanted and the unwanted effects--attempt was made to obtain quantitative data on the possible penetration of cetyl alcohol contained in an aqueous hydrophilie cream (DAB 8) and in a wool fat alcohol ointment (lanoline) (DAB 8). Also the behaviour of the long-chained hydrocarbon, paraffin (octadecan), in these vehicles and in petrolatum (DAB 8) was studied. We found that the emulsifying agent in a W/O emulsion was detectable in the epidermis in low concentrations after 100 min, but the same agent in O/W emulsions only after 1000 min. It is, therefore, unlikely that cetyl alcohol penetrates the intact skin in allergicologically relevant concentrations. However, with diseased skin, a marked percutaneous absorption of cetyl alcohol, but not with paraffin, must be expected. PMID:3987517

  10. The effect of cetylated fatty esters and physical therapy on myofascial pain syndrome of the neck.

    PubMed

    Sharan, Deepak; Jacob, Biju Nirmal; Ajeesh, P S; Bookout, Jack B; Barathur, Raj R

    2011-07-01

    Participants with Myofascial Pain Syndrome (MPS) of the neck were randomly assigned into 2 groups of the double-blinded study: topical cetylated fatty ester complex (CFEC) cream application plus physical therapy (CF-PT; n=37), and placebo cream application plus physical therapy (PL-PT; n=35). There were 3 visits during 4 weeks of treatment. Physical Therapy (PT), given twice/week, included Ischaemic Compression, Deep Pressure Trigger Point Massage and Myofascial Releases. Topical cream [CFEC cream (5.6%) and 1.5% menthol] or placebo cream [1.5% menthol, in a cream base] was applied twice/day. CF-PT provided the fastest and most effective study treatment modality. The addition of CFEC cream to PT resulted in statistically significant improvements, compared to PL-PT, for reduction of pain, neck disability and life quality indicators. Our results indicate that cetylated derivatives of fatty acids can effectively reduce pain and symptoms associated with neck MPS, when combined with physical therapy. PMID:21665114

  11. Lipase catalysed synthesis of cetyl oleate using ultrasound: Optimisation and kinetic studies.

    PubMed

    Khan, Nishat R; Jadhav, Sachin V; Rathod, Virendra K

    2015-11-01

    The current paper exemplifies the application of ultrasound technology to enzymatic synthesis of a cosmetic emollient ester, cetyl oleate. Fermase CALB™10000, a commercial Candida antarctica lipase B was used as a catalyst to accomplish the ultrasound supported synthesis. Multiple process parameters like reaction time, temperature, enzyme dose, alcohol to acid molar ratio, ultrasound power, frequency and speed of agitation were optimised. Maximum conversion of ∼95.96% was discerned at optimum conditions, i.e., 60°C temperature, 5% enzyme dose, 2:1 alcohol:acid ratio, 60 W ultrasound power, 25 kHz ultrasound frequency, 80% duty cycle and 80 rpm speed of agitation after purification steps. It was observed that the reaction reached equilibrium in a short duration of 30 min under the optimised conditions. This was considerably lesser than the time required for attaining equilibrium in conventional mechanical stirring method which was over 2h. Bisubstrate kinetic models like random bi-bi, ping pong bi-bi and ordered bi-bi were applied to the experimental data to determine initial rates and other kinetic parameters. Ordered bi-bi model showed the best fit with kinetic parameters, Vmax=0.029 M/min/gcatalyst, KA=0.00001 M, KB=4.8002 M, KiA=0.00014 M, KiB=3.7914 M & SSE=0.00022 for enzymatic cetyl oleate synthesis under ultrasound irradiation with inhibition by both acid and alcohol at high concentrations. PMID:25913878

  12. 40 CFR 721.5250 - Trimethyl spiropolyheterocyclic naphthalene compound.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... naphthalene compound. 721.5250 Section 721.5250 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.5250 Trimethyl spiropolyheterocyclic naphthalene compound. (a) Chemical... as trimethyl spir-o-poly-het-er-o-cyc-lic naphthalene compound (PMN P-91-1456) is subject...

  13. 40 CFR 721.5250 - Trimethyl spiropolyheterocyclic naphthalene compound.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... naphthalene compound. 721.5250 Section 721.5250 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.5250 Trimethyl spiropolyheterocyclic naphthalene compound. (a) Chemical... as trimethyl spir-o-poly-het-er-o-cyc-lic naphthalene compound (PMN P-91-1456) is subject...

  14. 40 CFR 721.5250 - Trimethyl spiropolyheterocyclic naphthalene compound.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... naphthalene compound. 721.5250 Section 721.5250 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.5250 Trimethyl spiropolyheterocyclic naphthalene compound. (a) Chemical... as trimethyl spir-o-poly-het-er-o-cyc-lic naphthalene compound (PMN P-91-1456) is subject...

  15. 40 CFR 721.5250 - Trimethyl spiropolyheterocyclic naphthalene compound.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... naphthalene compound. 721.5250 Section 721.5250 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.5250 Trimethyl spiropolyheterocyclic naphthalene compound. (a) Chemical... as trimethyl spir-o-poly-het-er-o-cyc-lic naphthalene compound (PMN P-91-1456) is subject...

  16. 40 CFR 721.5250 - Trimethyl spiropolyheterocyclic naphthalene compound.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... naphthalene compound. 721.5250 Section 721.5250 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.5250 Trimethyl spiropolyheterocyclic naphthalene compound. (a) Chemical... as trimethyl spir-o-poly-het-er-o-cyc-lic naphthalene compound (PMN P-91-1456) is subject...

  17. Synthesis and Antibacterial Activity of Novel Quaternary Ammonium Pyridoxine Derivatives.

    PubMed

    Shtyrlin, Nikita V; Sapozhnikov, Sergey V; Koshkin, Sergey A; Iksanova, Alfiya G; Sabirov, Arthur H; Kayumov, Airat R; Nureeva, Aliya A; Zeldi, Marina I; Shtyrlin, Yurii G

    2015-01-01

    A series of 26 quaternary ammonium pyridoxine derivatives were synthesized and their cytotoxicity and antibacterial activities against clinically relevant bacterial strains were tested in vitro. The antibacterial activity of mono-ammonium salts increased with the rise of the lipophilicity and compound 3,3,5-trimethyl-8,8-dioctyl-1,7,8,9-tetrahydro-[1,3]dioxino[5,4-d]pyrrolo[3,4-b]pyridin-8-ium chloride (2d) reaches a maximum among them. Bis-ammonium salt of pyridoxine 4 with two dimethyloctylamine groups also demonstrated high antibacterial activity despite lower lipophilicity. The results of MTT assay indicated that HEK 293 cells were more sensitive than HSF to quaternary ammonium pyridoxine derivatives. Compounds 2d and 4 did not induce the damage of the DNA and might be of interest in the development of new antimicrobials. PMID:25938426

  18. Heteroorganic furan derivatives. 61. Trimethyl (5-methyl-2-furyl) silane and trimethyl (5-methyl-2-furyl) german

    SciTech Connect

    Lukevits, E.; Ignatovich, L.M.; Iovel', I.G.; Gol'dberg, Yu.Sh.; Shimanskaya, M.V.

    1987-07-01

    The transformations of trimethyl (5-methyl-2-furyl)silane and trimethyl (5-methyl-2-furyl) germane were studied upon vapor-phase oxidation by atmospheric oxygen on a V-Mo-Ag-O catalyst. Under these conditions, trimethyl(5-formyl-2-furyl)-silane and trimethyl (5-formyl-2-furyl) germane are formed albeit in only 5-7% yield. This low yield is a consequence of the thermal instability of the starting compounds and the aldehydes formed. The oxidation of 2-methyl-5-tert-butylfuran was studied under comparable conditions. The corresponding aldehyde was obtained in 30% yield. A scheme was proposed for the catalytic oxidation of 5-substituted 2-methylfurans.

  19. Development of cetyl dimethicone based water-in-oil emulsion containing botanicals: Physical characteristics and stability.

    PubMed

    Waqas, Muhammad Khurram; Akhtar, Naveed; Shah, Pervaiz Akhtar; Danish, Muhammad Zeeshan; Shah, Arshad Ali; Braga, Valdir de Andrade; Khan, Barkat Ali

    2016-01-01

    The aim of current research was to develop a water-in-oil emulsion containing grape seed extract for application in cosmeceuticals. Finally grinded dried grape seeds powder was extracted with hydro alcoholic mixture. Emulsions consisting of different concentrations of cetyl dimethicone (Abile EM90), the nonionic emulsifier, liquid paraffin as oily phase and water as aqueous phase were developed. Color, odor, pH, viscosity, liquefaction, phase separation, centrifugation and thermal stability of the formulated emulsions were observed at various storage temperatures i.e. 8±0.5°C, 25±0.5°C, 40±0.5°C and 40°C±0.5°C with 70% RH. The stable formulation consist of 16% mineral oil, 4% of ABIL EM 90(®), 4% grape seeds extract, 1% rose oil and 75% distilled water. All the results derived from this study showed good stability over the three months study period which indicates w/o emulsion can be used as carrier of 4% grape seeds extract to enhance desired effects when applied topically. PMID:26826810

  20. High Yield of Wax Ester Synthesized from Cetyl Alcohol and Octanoic Acid by Lipozyme RMIM and Novozym 435

    PubMed Central

    Kuo, Chia-Hung; Chen, Hsin-Hung; Chen, Jiann-Hwa; Liu, Yung-Chuan; Shieh, Chwen-Jen

    2012-01-01

    Wax esters are long-chain esters that have been widely applied in premium lubricants, parting agents, antifoaming agents and cosmetics. In this study, the biocatalytic preparation of a specific wax ester, cetyl octanoate, is performed in n-hexane using two commercial immobilized lipases, i.e., Lipozyme® RMIM (Rhizomucor miehei) and Novozym® 435 (Candida antarctica). Response surface methodology (RSM) and 5-level-4-factor central composite rotatable design (CCRD) are employed to evaluate the effects of reaction time (1–5 h), reaction temperature (45–65 °C), substrate molar ratio (1–3:1), and enzyme amount (10%–50%) on the yield of cetyl octanoate. Using RSM to optimize the reaction, the maximum yields reached 94% and 98% using Lipozyme® RMIM and Novozym® 435, respectively. The optimum conditions for synthesis of cetyl octanoate by both lipases are established and compared. Novozym® 435 proves to be a more efficient biocatalyst than Lipozyme® RMIM. PMID:23109878

  1. Cationic quaternization of cellulose with methacryloyloxy ethyl trimethyl ammonium chloride via ATRP method

    SciTech Connect

    Supeno; Daik, Rusli; El-Sheikh, Said M.

    2014-09-03

    The synthesis of a cationic cellulose copolymer from cellulose macro-initiator (MCC-BiB) and quaternary compound monomer (METMA) via atom transfer radical polymerization (ATRP) was studied. By using dimethylformamide (DMF), the optimum condition for successful synthesis was at the mole ratio of MCC-BIB:Catalyst:METMA = 1:1:26. The highest copolymer recovery was 93.2 % for 6 h and at 40°C. The copolymer was insoluble in weak polar solvents such as THF and DMF but soluble in methanol and water. The chemistry of cellulose copolymer was confirmed by the FTIR and TGA in which the METMA monomer was used as a reference. The absence of CC bond in the CiB-g-METMA spectrum indicated that graft copolymerization occurred.

  2. Release of cetyl pyridinium chloride from fatty acid chelate temporary dental cement

    PubMed Central

    Hurt, Andrew; Coleman, Nichola J.; Tüzüner, Tamer; Bagis, Bora; Korkmaz, Fatih Mehmet; Nicholson, John W.

    2016-01-01

    Abstract Objective To determine whether the antimicrobial nature of a fatty acid chelate temporary dental cement can be enhanced by the addition of 5% cetyl pyridinium chloride (CPC). Materials and methods The temporary cement, Cavex Temporary was employed, and additions of CPC were made to either the base or the catalyst paste prior to mixing the cement. Release of CPC from set cement specimens was followed using reverse-phase HPLC for a period of up to 2 weeks following specimen preparation. Potential interactions between Cavex and CPC were examined by Fourier transform infrared spectroscopy (FTIR) and antimicrobial effects were determined using zone of inhibition measurements after 24 h with disc-shaped specimens in cultured Streptococcus mutans. Results FTIR showed no interaction between CPC and the components of the cement. CPC release was found to follow a diffusion mechanism for the first 6 h or so, and to equilibrate after approximately 2 weeks, with no significant differences between release profiles when the additive was incorporated into the base or the catalyst paste. Diffusion was rapid, and had a diffusion coefficient of approximately 1 × 10−9 m2 s−1 in both cases. Total release was in the range 10–12% of the CPC loading. Zones of inhibition around discs containing CPC were significantly larger than those around the control discs of CPC-free cement. Conclusions The antimicrobial character of this temporary cement can be enhanced by the addition of CPC. Such enhancement is of potential clinical value, though further in vivo work is needed to confirm this. PMID:27335898

  3. Health and environmental-effects profile for trimethyl phosphate

    SciTech Connect

    Not Available

    1985-09-01

    The Health and Environmental Effects Profile for trimethyl phosphate was prepared by the Office of Health and Environmental Assessment, Environmental Criteria and Assessment Office, Cincinnati, OH for the Office of Solid Waste and Emergency Response to support listings of hazardous constituents of a wide range of waste streams under Section 3001 of the Resource Conservation and Recovery Act (RCRA) and to provide health-related limits for emergency actions under Section 101 of the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA). Both published literature and information obtained from Agency program office files were evaluated as they pertained to potential human health, aquatic life, and environmental effects of hazardous-waste constituents. Quantitative estimates are presented, provided sufficient data are available. Trimethyl phosphate has been evaluated as a carcinogen. The human carcinogen potency factor (q1*) for trimethyl phosphate is .0383 (mg/kg/day)-1 for oral exposure. The Reportable Quantity (RQ) value of 1, 10, 100, 1000, or 5000 pounds is used to determine the quantity of a hazardous substance for which notification is required in the event of a release as specified by CERCLA based on chronic toxicity. The RQ value for trimethyl phosphate is 100.

  4. Nortriketones: Antimicrobial Trimethylated Acylphloroglucinols from Manuka (Leptospermum scoparium)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Four trimethylated acylphloroglucinols (5-8) have been isolated from manuka (Leptospermum scoparium) foliage. Apart from myrigalone A (8), which has previously been isolated from European bog myrtle (Myrica gale), these compounds have not been characterized before. The nortriketones are structurally...

  5. Modeling of alkyl quaternary ammonium cations intercalated into montmorillonite lattice

    SciTech Connect

    Daoudi, El Mehdi; Boughaleb, Yahia; El Gaini, Layla; Meghea, Irina; Bakasse, Mina

    2013-05-15

    Highlights: ► The modification of montmorillonites by three surfactants increases the basal spacing. ► The model proposed show a bilayer conformation for the surfactant ODTMA. ► The DODMA and TOMA surfactants adopt a paraffin type arrangement. ► Behavior of surfactants in interlayer space was confirmed by TGA and ATR analysis. - Abstract: The objective of this work was to study the conformation of the quaternary ammonium cations viz., octadecyl trimethyl ammonium (ODTMA), dioctadecyl dimethyl ammonium (DMDOA) and trioctadecyl methyl ammonium (TOMA) intercalated within montmorillonite. The modified montmorillonite was characterized by X-ray diffraction in small angle (SAXS), thermal analysis (TGA) and infrared spectroscopy of attenuated total reflection (ATR). The modification of organophilic montmorillonites by the three surfactants ODTMA, DMDOA and TOMA increases the basal spacing from their respective intercalated distances of 1.9 nm, 2.6 nm and 3.4 nm respectively. The increase in the spacing due to the basic organic modification was confirmed by the results of thermal analysis (TGA) and infrared spectroscopy (ATR), and also supported by theoretical calculations of longitudinal and transversal chain sizes of these alkyl quaternary ammonium cations.

  6. Ammonium nitrate explosive systems

    SciTech Connect

    Coburn, M.D.; Stinecipher, M.M.

    1981-11-17

    Novel explosives which comprise mixtures of ammonium nitrate and an ammonium salt of a nitroazole in desired ratios are disclosed. A preferred nitroazole is 3,5-dinitro-1,2,4-triazole. The explosive and physical properties of these explosives may readily be varied by the addition of other explosives and oxidizers. Certain of these mixtures have been found to act as ideal explosives.

  7. Ammonium nitrate explosive systems

    DOEpatents

    Stinecipher, Mary M.; Coburn, Michael D.

    1981-01-01

    Novel explosives which comprise mixtures of ammonium nitrate and an ammonium salt of a nitroazole in desired ratios are disclosed. A preferred nitroazole is 3,5-dinitro-1,2,4-triazole. The explosive and physical properties of these explosives may readily be varied by the addition of other explosives and oxidizers. Certain of these mixtures have been found to act as ideal explosives.

  8. Infrared band intensities in ammonium hydroxide and ammonium salts

    NASA Technical Reports Server (NTRS)

    Sethna, P. P.; Downing, H. D.; Pinkley, L. W.; Williams, D.

    1978-01-01

    We have applied Kramers-Kronig analysis to reflection spectra to determine the optical constants of ammonium hydroxide and of aqueous solutions of ammonium chloride and bromide. From considerations of the absorption indices k(nu) we conclude that ammonium hydroxide consists of a solution of NH3 in water, in which NH3 molecules are hydrogen bonded to neighboring water molecules. The spectrum of ammonium hydroxide differs from the spectra of ammonium salts, in which bands characteristic of NH4(+) ions are prominent. The existence of ammonium hydroxide as an aerosol in planetary atmospheres is briefly discussed

  9. 40 CFR 180.1086 - 3,7,11-Trimethyl-1,6,10-dodecatriene-1-ol and 3,7,11-trimethyl-2,6,10-dodecatriene-3-ol...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ....1086 3,7,11-Trimethyl-1,6,10-dodecatriene-1-ol and 3,7,11-trimethyl-2,6,10-dodecatriene-3-ol; exemption... 40 Protection of Environment 23 2010-07-01 2010-07-01 false 3,7,11-Trimethyl-1,6,10-dodecatriene-1-ol and 3,7,11-trimethyl-2,6,10-dodecatriene-3-ol; exemption from the requirement of a tolerance....

  10. The sensitivity to chlorhexidine and cetyl pyridinium chloride of staphylococci on the hands of dental students and theatre staff exposed to these disinfectants.

    PubMed

    Millns, B; Martin, M V; Field, E A

    1994-02-01

    The aim of this investigation was to study the possible emergence of resistant isolates of the genus Staphylococcus on the hands of dental personnel who use 'Hibiscrub' (chlorhexidine-detergent preparation) and cetyl pyridinium-coated gloves. Resistance was determined by a rate-of-kill technique. In four dental student groups (first, second, third and fourth years) no microorganisms survived 30 min exposure to cetyl pyridinium chloride (CPC) or to chlorhexidine diacetate (CDA). In a theatre staff group, no microorganisms survived 30 s exposure to CPC; and only one of 23 isolates survived 30 min exposure to CDA, but was killed after 60 min exposure. It is concluded that staphylococci resistant to either of these disinfectants do not present a problem in dental students or theatre staff. PMID:7911154

  11. 70. INTERIOR VIEW OF AMMONIUM NITRATE HOUSE, LOOKING AT AMMONIUM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    70. INTERIOR VIEW OF AMMONIUM NITRATE HOUSE, LOOKING AT AMMONIUM NITRATE IN STORAGE. APRIL 18, 1919. - United States Nitrate Plant No. 2, Reservation Road, Muscle Shoals, Muscle Shoals, Colbert County, AL

  12. Structure and rheology of semisolid o/w creams containing cetyl alcohol/non-ionic surfactant mixed emulsifier and different polymers.

    PubMed

    Ribeiro, H M; Morais, J A; Eccleston, G M

    2004-04-01

    Oil-in-water (o/w) emulsions for cosmetic use, such as lotions and creams, are complex multiple-phase systems, which may contain a number of interacting surfactants, fatty amphiphiles, polymers and other excipients. This study investigates the influence of two synthetic cationic polymers, Polyquaternium-7 and Polyquaternium-11, and the natural anionic polymer, gum of acacia, on the rheology and microstructure of creams prepared with a non-ionic mixed emulsifier (cetyl stearyl alcohol-12EO/cetyl alcohol) using rheology (continuous shear, and viscoelastic creep and oscillation), microscopy and differential scanning calorimetry (DSC). A control cream containing no polymer was also investigated. The semisolid control cream was structured by a swollen lamellar gel network phase formed from the interaction of cetyl alcohol and the POE surfactant, in excess of that required to stabilize oil droplets, with continuous phase water. Endothermic transitions between 25 and 100 degrees C were identified as components of this phase. Incorporation of cationic polymer into the formulation caused significant loss of structure to produce a mobile semisolid containing larger oil droplets. The microscopical and thermal data implied that the cationic polymer caused the swollen lamellar gel network phase to transform into non-swollen crystals of cetyl alcohol. In contrast, incorporation of gum of acacia produced a thicker cream than the control, with smaller droplet sizes and little evidence of the gel network. Microscopical and thermal data implied that although there were also interactions between gum of acacia and both the surfactant and the swollen gel network phase, the semisolid properties were probably because of the ability of the gum of acacia to stabilize and thicken the emulsion in the absence of the swollen lamellar network. PMID:18494913

  13. Vibrational overtone stretching transitions in trimethyl phosophate and triethyl phosophate

    NASA Astrophysics Data System (ADS)

    Petryk, Michael W. P.

    2007-04-01

    The CH stretching overtone transitions of chemical warfare agents are of interest in the area of threat detection, including standoff threat detection, as many of these transitions occur near regions where small, efficient diode lasers operate. Further, detectors which operate in the regions where CH overtone transitions occur (i.e., in the near infrared and visible regions) are usually much more sensitive than detectors which operate in the region where fundamental CH vibrational transitions occur (i.e., in the mid infrared). However, the interpretation of experimental overtone spectra is complex, and the computational simulation of overtone spectra is challenging. Presented herein are the simulated vapour phase CH overtone stretching transitions in the nerve agent simulants trimethyl phosophate and triethyl phosophate. Spectral regions are simulated using the harmonically coupled anharmonic oscillator (HCAO) model. Data for HCAO calculations are obtained from ab initio calculations, without recourse to experimental data.

  14. Glufosinate-ammonium

    Integrated Risk Information System (IRIS)

    Glufosinate - ammonium ; CASRN 77182 - 82 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarci

  15. Immobilized Rhizopus oryzae lipase catalyzed synthesis of palm stearin and cetyl alcohol wax esters: Optimization by Response Surface Methodology

    PubMed Central

    2011-01-01

    Background Waxes are esters of long-chain fatty acids and long-chain alcohols. Their principal natural sources are animals (sperm whale oil) and vegetables (jojoba) which are expensive and not easily available. Wax esters synthesized by enzymatic transesterification, using palm stearin as raw material, can be considered as an alternative to natural ones. Results Palm stearin is a solid fraction obtained by fractionation of palm oil. Palm stearin was esterified with cetyl alcohol to produce a mixture of wax esters. A non-commercial immobilized lipase from Rhizopus oryzae was used as biocatalyst. Response surface methodology was employed to determine the effects of the temperature (30-50°C), the enzyme concentration (33.34-300 IU/mL), the alcohol/palm stearin molar ratio (3-7 mol/mol) and the substrate concentration (0.06-0.34 g/mL) on the conversion yield of palm stearin. Under optimal conditions (temperature, 30°C; enzyme concentration, 300 IU/mL; molar ratio 3 and substrate concentration 0.21 g/mL) a high conversion yield of 98.52% was reached within a reaction time of 2 h. Conclusions Response surface methodology was successfully applied to determine the optimum operational conditions for synthesis of palm stearin based wax esters. This study may provide useful tools to develop economical and efficient processes for the synthesis of wax esters. PMID:21682865

  16. Bis(trimethyl-phenyl-ammonium) hexa-[bromido/chlorido(0.792/0.208)]stannate(IV).

    PubMed

    Lo, Kong Mun; Ng, Seik Weng

    2010-01-01

    In the title mol-ecular salt, [C(6)H(5)(CH(3))(3)N](2)[SnBr(4.75)Cl(1.25)], the Sn(IV) atom (site symmetry ) adopts an octa-hedral coordination geometry. The Br and Cl atoms are disordered over three sites in 0.7415 (13):0.2585 (14), 0.8514 (14):0.1486 (14) and 0.7821 (14):0.2179 (14) ratios. PMID:21580468

  17. Field Dissipation and Storage Stability of Glufosinate Ammonium and Its Metabolites in Soil

    PubMed Central

    Zhang, Yun; Wang, Kai; Wu, Junxue; Zhang, Hongyan

    2014-01-01

    A simple analytical method was developed to measure concentrations of glufosinate ammonium and its metabolites, 3-methylphosphinico-propionic acid (MPP) and 2-methylphosphinico-acetic acid (MPA), in field soil samples. To determine the minimum quantification limit, samples were spiked at different levels (0.1, 0.5, and 1.0 mg/kg). Soil samples were extracted with ammonium hydroxide solution 5% (v/v), concentrated, and reacted with trimethyl orthoacetate (TMOA) in the presence of acetic acid for derivatization. The derivatives were quantified by gas chromatography (GC) using a flame photometric detector (FPD). The linear correlation coefficients of glufosinate ammonium, MPP, and MPA in soil were 0.991, 0.999, and 0.999, respectively. The recoveries of this method for glufosinate ammonium, MPP, and MPA in soil were 77.2–95.5%, 98.3–100.3%, and 99.3–99.6% with relative standard deviations (RSD) of 1.8–4.1%, 0.4–1.4%, and 1.3–2.0%, respectively. Glufosinate ammonium dissipated rapidly in soil to MPA in hours and gradually degraded to MPP. The half-life of glufosinate ammonium degradation in soil was 2.30–2.93 days in an open field. In soil samples stored at −20°C glufosinate ammonium was stable for two months. The results of this study should provide guidance for the safe application of the herbicide glufosinate ammonium to agricultural products and the environment. PMID:25374604

  18. Hydrothermal synthesis of ammonium illite

    USGS Publications Warehouse

    Sucha, V.; Elsass, F.; Eberl, D.D.; Kuchta, L'.; Madejova, J.; Gates, W.P.; Komadel, P.

    1998-01-01

    Synthetic gel and glass of illitic composition, natural kaolinite, and mixed-layer illite-smectite were used as starting materials for hydrothermal synthesis of ammonium illite. Ammonium illite was prepared from synthetic gel by hydrothermal treatment at 300??C. The onset of crystallization began within 3 h, and well-crystallized ammonium illite appeared at 24 h. Increasing reaction time (up to four weeks) led to many illite layers per crystal. In the presence of equivalent proportions of potassium and ammonium, the gel was transformed to illite with equimolar contents of K and NH4. In contrast, synthesis using glass under the same conditions resulted in a mixture of mixed-layer ammonium illite-smectite with large expandability and discrete illite. Hydrothermal treatments of the fine fractions of natural kaolinite and illite-smectite produced ammonium illite from kaolinite but the illite-smectite remained unchanged.

  19. Stabilization of different conformers of bis(trifluoromethanesulfonyl)imide anion in ammonium-based ionic liquids at low temperatures.

    PubMed

    Vitucci, F M; Trequattrini, F; Palumbo, O; Brubach, J-B; Roy, P; Navarra, M A; Panero, S; Paolone, A

    2014-09-25

    The infrared absorption spectra of two ionic liquids with bis(trifluoromethanesulfonyl)imide (TFSI) as an anion and ammonium with different alkyl chains as cations are reported as a function of temperature. Using the comparison with ab initio calculations of the infrared-active intramolecular vibrations, the experimental lines were ascribed to the various ions composing the ionic liquids. In the liquid state of the samples, both conformers of the TFSI ion are present. In the solid state, however, the two conformers survive in N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)imide (TMPA-TFSI), while only cis-TFSI is retained in N-trimethyl-N-hexylammonium bis(trifluoromethanesulfonyl)imide (TMHA-TFSI). We suggest that the longer alkyl chains of the former compound stabilize the less stable conformer of TFSI by means of stronger interactions between anions and cations. PMID:25188394

  20. Ammonium diphosphitoindate(III)

    PubMed Central

    Hamchaoui, Farida; Rebbah, Houria; Le Fur, Eric

    2013-01-01

    The crystal structure of the title compound, NH4[In(HPO3)2], is built up from InIII cations (site symmetry 3m.) adopting an octa­hedral environment and two different phosphite anions (each with site symmetry 3m.) exhibiting a triangular–pyramidal geometry. Each InO6 octa­hedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO3)2]− layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO3)2]− layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4 + cations and the O atoms of the framework. PMID:23633983

  1. Ammonium diphosphitoindate(III).

    PubMed

    Hamchaoui, Farida; Rebbah, Houria; Le Fur, Eric

    2013-04-01

    The crystal structure of the title compound, NH4[In(HPO3)2], is built up from In(III) cations (site symmetry 3m.) adopting an octa-hedral environment and two different phosphite anions (each with site symmetry 3m.) exhibiting a triangular-pyramidal geometry. Each InO6 octa-hedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO3)2](-) layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO3)2](-) layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4 (+) cations and the O atoms of the framework. PMID:23633983

  2. The association effect of quaternary ammonium salt on carboxymethyl cellulose and its analytical applications.

    PubMed

    Wang, Yanhua; Gao, Chanjuan; Yang, Shengke

    2015-01-01

    Sodium carboxymethyl cellulose (CMC) has been extensively used in petroleum, geology, common household chemicals, food, medicine and other industries, owing to its excellent water-soluble, emulsifying, water retention and film forming properties. It is known as 'industrial monosodium glutamate'. However, the research of the test method on CMC is far behind the research of its actual application value. This study showed that, weak acid or weak basic medium, the carboxyl groups dissociated from CMC, existing as a big negative ion, which can form ion-association complexes with some quaternary ammonium cations through electrostatic and hydrophobic interactions. The absorption spectrum changes and Triton-X100 can increase the sensitivity of the system. The maximum absorption wavelengths are, respectively, about 256 nm for dodecyl trimethyl ammonium bromide (LTAB), 244 nm for tetradecyltrimethyl ammonium bromide (TTAB) and 240 nm for cetyltrimethyl ammonium bromide (CTAB) with CMC. The reactions show very high sensitivities and the maximum molar absorption coefficients are 1.10 × 10(4) L/(mol·cm) for LTAB system, 1.24 × 10(6) L/(mol·cm) for TTAB system and 1.78 × 10(6) L/(mol·cm) for CTAB system. This method is simple and rapid, and can be applied for the spectrophotometric determination of trace CMC in the supernatant of centrifuged drilling mud. PMID:26360741

  3. High performance ammonium nitrate propellant

    NASA Technical Reports Server (NTRS)

    Anderson, F. A. (Inventor)

    1979-01-01

    A high performance propellant having greatly reduced hydrogen chloride emission is presented. It is comprised of: (1) a minor amount of hydrocarbon binder (10-15%), (2) at least 85% solids including ammonium nitrate as the primary oxidizer (about 40% to 70%), (3) a significant amount (5-25%) powdered metal fuel, such as aluminum, (4) a small amount (5-25%) of ammonium perchlorate as a supplementary oxidizer, and (5) optionally a small amount (0-20%) of a nitramine.

  4. Torque vs. induced load of A-286, and MP35N nuts and bolts with cadmium, dry film, and cetyl alcohol lubricants

    NASA Technical Reports Server (NTRS)

    Crispell, C.

    1978-01-01

    Data for specific joint design, utilizing various combinations of bolt, nut and lubricants in typical structure of the shuttle booster rocket is obtained. Requirements of the structure performance criteria were to withstand temperatures of 260 C (500 F) and to provide a nut lubricant which would be compatible with sealants used in the joint. Cadmium plating and dry film lubricant meeting the requirements of MIL-L-8937 were the lubricants specified. In a follow up effort, cadmium plating and cetyl alcohol were further specified The materials for the bolt and nut combinations were MP35N and A-286. These materials demand a lubricant to be used to prevent galling of the thread when tightened and also to help reduce the scatter of clamping load in application.

  5. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS Reg. No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  6. 21 CFR 184.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ammonium sulfate. 184.1143 Section 184.1143 Food... Specific Substances Affirmed as GRAS § 184.1143 Ammonium sulfate. (a) Ammonium sulfate ((NH4)2SO4, CAS Reg... is prepared by the neutralization of sulfuric acid with ammonium hydroxide. (b) The ingredient...

  7. 21 CFR 184.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...). It is prepared by the sublimation of a mixture of ammonium sulfate and calcium carbonate and occurs... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ammonium carbonate. 184.1137 Section 184.1137 Food... Specific Substances Affirmed as GRAS § 184.1137 Ammonium carbonate. (a) Ammonium carbonate ((NH4)2CO3,...

  8. 21 CFR 184.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium sulfate. 184.1143 Section 184.1143 Food... GRAS § 184.1143 Ammonium sulfate. (a) Ammonium sulfate ((NH4)2SO4, CAS Reg. No. 7783-20-2) occurs... neutralization of sulfuric acid with ammonium hydroxide. (b) The ingredient meets the specifications of the...

  9. 21 CFR 184.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ammonium sulfate. 184.1143 Section 184.1143 Food... Specific Substances Affirmed as GRAS § 184.1143 Ammonium sulfate. (a) Ammonium sulfate ((NH4)2SO4, CAS Reg... is prepared by the neutralization of sulfuric acid with ammonium hydroxide. (b) The ingredient...

  10. 21 CFR 184.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...). It is prepared by the sublimation of a mixture of ammonium sulfate and calcium carbonate and occurs... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium carbonate. 184.1137 Section 184.1137 Food... Specific Substances Affirmed as GRAS § 184.1137 Ammonium carbonate. (a) Ammonium carbonate ((NH4)2CO3,...

  11. A method for determining the composition of methanol-trimethyl borate mixtures

    NASA Technical Reports Server (NTRS)

    Kaye, Samuel; Sordyl, Frank

    1955-01-01

    A study of mixtures of pure methanol and trimethyl borate showed that the composition can be accurately obtained by a simple density determination. The refractive-index determination gives the composition with much less accuracy. The potentiometric titration of boric acid is also discussed.

  12. Nanocomposite membranes based on quaternized polysulfone and functionalized montmorillonite for anion-exchange membranes

    NASA Astrophysics Data System (ADS)

    Liao, Xiaofeng; Ren, Li; Chen, Dongzhi; Liu, Xiaohong; Zhang, Hongwei

    2015-07-01

    In this paper, functionalized montmorillonite is intercalated with cetyl trimethyl ammonium chloride and (3-aminopropyl)triethoxysilane. Quaternized polysulfone/functionalized montmorillonite nanocomposite membranes are fabricated to evaluate their potential in anion-exchange membrane fuel cells. Fourier transform infrared spectroscopy, thermogravimetric analyzer and X-ray diffractometer are used to confirm the success of intercalation. The performances of the composite membranes for the anion-exchange membrane fuel cells in terms of their water uptake, mechanical property and ionic conductivity are investigated. Compared with other anion-exchange membranes, the nanocomposite membrane containing 5% montmorillonite modified by cetyl trimethyl ammonium chloride exhibits lower water uptake, higher ultimate stress and larger ionic conductivity. It exhibits an ionic conductivity of 4.73 × 10-2 S cm-1 at 95 °C.

  13. Solubility of the Sodium and Ammonium Salts of Oxalic Acid in Water with Ammonium Sulfate.

    PubMed

    Buttke, Lukas G; Schueller, Justin R; Pearson, Christian S; Beyer, Keith D

    2016-08-18

    The solubility of the sodium and ammonium salts of oxalic acid in water with ammonium sulfate present has been studied using differential scanning calorimetry, X-ray crystallography, and infrared spectroscopy. The crystals that form from aqueous mixtures of ammonium sulfate/sodium hydrogen oxalate were determined to be sodium hydrogen oxalate monohydrate under low ammonium sulfate conditions and ammonium hydrogen oxalate hemihydrate under high ammonium sulfate conditions. Crystals from aqueous mixtures of ammonium sulfate/sodium oxalate were determined to be ammonium oxalate monohydrate under moderate to high ammonium sulfate concentrations and sodium oxalate under low ammonium sulfate concentrations. It was also found that ammonium sulfate enhances the solubility of the sodium oxalate salts (salting in effect) and decreases the solubility of the ammonium oxalate salts (salting out effect). In addition, a partial phase diagram for the ammonium hydrogen oxalate/water system was determined. PMID:27482644

  14. 46 CFR 148.205 - Ammonium nitrate and ammonium nitrate fertilizers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Ammonium nitrate and ammonium nitrate fertilizers. 148... Materials § 148.205 Ammonium nitrate and ammonium nitrate fertilizers. (a) This section applies to the stowage and transportation in bulk of ammonium nitrate and the following fertilizers composed of...

  15. 46 CFR 148.205 - Ammonium nitrate and ammonium nitrate fertilizers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Ammonium nitrate and ammonium nitrate fertilizers. 148... Materials § 148.205 Ammonium nitrate and ammonium nitrate fertilizers. (a) This section applies to the stowage and transportation in bulk of ammonium nitrate and the following fertilizers composed of...

  16. 46 CFR 148.205 - Ammonium nitrate and ammonium nitrate fertilizers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Ammonium nitrate and ammonium nitrate fertilizers. 148... Materials § 148.205 Ammonium nitrate and ammonium nitrate fertilizers. (a) This section applies to the stowage and transportation in bulk of ammonium nitrate and the following fertilizers composed of...

  17. 46 CFR 148.205 - Ammonium nitrate and ammonium nitrate fertilizers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Ammonium nitrate and ammonium nitrate fertilizers. 148... Materials § 148.205 Ammonium nitrate and ammonium nitrate fertilizers. (a) This section applies to the stowage and transportation in bulk of ammonium nitrate and the following fertilizers composed of...

  18. Hydrophobic aggregation of fine particles in high muddied coal slurry water.

    PubMed

    Chen, Jun; Min, Fanfei; Liu, Lingyun; Peng, Chenliang; Lu, Fangqin

    2016-01-01

    The hydrophobic aggregation of fine particles in high muddied coal slurry water in the presence of four quaternary ammonium salts of 1231(dodecyl trimethyl ammonium chloride), 1431(tetradecyl trimethyl ammonium chloride), 1631(cetyl trimethyl ammonium chloride) and 1831(octadecyl trimethyl ammonium chloride) was investigated through the measurement of contact angles, zeta potentials, aggregation observation, adsorption and sedimentation. The results show that quaternary ammonium salts can enhance the hydrophobicity and reduce the electronegativity of particle surface, and thus induce a strong hydrophobic aggregation of slurry fine particles which promotes the settlement of coal slurry water. The adsorption of quaternary ammonium salts on slurry particles increases with the increase of alkyl chain length and reagent dosage, and will reach equilibrium when the dosage reaches a certain value. Weak alkaline conditions also can promote quaternary ammonium salts to be adsorbed on the coal slurry fine particles. In addition, reasonable energy input and a chemical environment of weak alkaline solution are conducive to hydrophobic aggregation settlement of high muddied coal slurry water with quaternary ammonium salts. The main mechanism of hydrophobic aggregation of coal slurry particles with quaternary ammonium salts is 'adsorption charge neutralization' and hydrophobic interaction. PMID:26877031

  19. Comparative DFT study of crystalline ammonium perchlorate and ammonium dinitramide.

    PubMed

    Zhu, Weihua; Wei, Tao; Zhu, Wei; Xiao, Heming

    2008-05-22

    The electronic structure, vibrational properties, absorption spectra, and thermodynamic properties of crystalline ammonium perchlorate (AP) and ammonium dinitramide (ADN) have been comparatively studied using density functional theory in the local density approximation. The results shows that the p states for the two solids play a very important role in their chemical reaction. From the low frequency to high frequency region, ADN has more motion modes for the vibrational frequencies than AP. The absorption spectra of AP and ADN display a few, strong bands in the fundamental absorption region. The thermodynamic properties show that ADN is easier to decompose than AP as the temperature increases. PMID:18396853

  20. Anaerobic ammonium oxidation for treatment of ammonium-rich wastewaters*

    PubMed Central

    Zhang, Lei; Zheng, Ping; Tang, Chong-jian; Jin, Ren-cun

    2008-01-01

    The concept of anaerobic ammonium oxidation (ANAMMOX) is presently of great interest. The functional bacteria belonging to the Planctomycete phylum and their metabolism are investigated by microbiologists. Meanwhile, the ANAMMOX is equally valuable in treatment of ammonium-rich wastewaters. Related processes including partial nitritation-ANAMMOX and completely autotrophic nitrogen removal over nitrite (CANON) have been developed, and lab-scale experiments proved that both processes were quite feasible in engineering with appropriate control. Successful full-scale practice in the Netherlands will accelerate application of the process in future. This review introduces the microbiology and more focuses on application of the ANAMMOX process. PMID:18500782

  1. TREATMENT OF AMMONIUM NITRATE SOLUTIONS

    DOEpatents

    Boyer, T.W.; MacHutchin, J.G.; Yaffe, L.

    1958-06-10

    The treatment of waste solutions obtained in the processing of neutron- irradiated uranium containing fission products and ammonium nitrate is described. The object of this process is to provide a method whereby the ammonium nitrate is destroyed and removed from the solution so as to permit subsequent concentration of the solution.. In accordance with the process the residual nitrate solutions are treated with an excess of alkyl acid anhydride, such as acetic anhydride. Preferably, the residual nitrate solution is added to an excess of the acetic anhydride at such a rate that external heat is not required. The result of this operation is that the ammonium nitrate and acetic anhydride react to form N/sub 2/ O and acetic acid.

  2. Fragrance material review on β,β,3-trimethyl-benzenepropanol.

    PubMed

    Scognamiglio, J; Jones, L; Letizia, C S; Api, A M

    2012-09-01

    A toxicologic and dermatologic review of β,β,3-trimethyl-benzenepropanol when used as a fragrance ingredient is presented. β,β,3-Trimethyl-benzenepropanol is a member of the fragrance structural group Aryl Alkyl Alcohols and is a primary alcohol. The AAAs are a structurally diverse class of fragrance ingredients that includes primary, secondary, and tertiary alkyl alcohols covalently bonded to an aryl (Ar) group, which may be either a substituted or unsubstituted benzene ring. The common structural element for the AAA fragrance ingredients is an alcohol group -C-(R1)(R2)OH and generically the AAA fragrances can be represented as an Ar-C-(R1)(R2)OH or Ar-Alkyl-C-(R1)(R2)OH group. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for β,β,3-trimethyl-benzenepropanol were evaluated then summarized and includes physical properties, acute toxicity, skin irritation, mucous membrane (eye) irritation, skin sensitization, elicitation, phototoxicity, photoallergy, repeated dose, and genotoxicity data. A safety assessment of the entire Aryl Alkyl Alcohols will be published simultaneously with this document; please refer to Belsito et al. (2012) for an overall assessment of the safe use of this material and all Aryl Alkyl Alcohols in fragrances. PMID:22036967

  3. 21 CFR 184.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... sublimation of a mixture of ammonium sulfate and calcium carbonate and occurs as a white powder or a hard... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium carbonate. 184.1137 Section 184.1137 Food... GRAS § 184.1137 Ammonium carbonate. (a) Ammonium carbonate ((NH4)2CO3, CAS Reg. No. 8000-73-5) is...

  4. 21 CFR 556.375 - Maduramicin ammonium.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Tolerances for Residues of New Animal Drugs § 556.375 Maduramicin ammonium. A tolerance is established for residues of maduramicin ammonium in chickens as follows: (a) A tolerance for maduramicin ammonium...

  5. 21 CFR 582.1141 - Ammonium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  6. 21 CFR 582.1141 - Ammonium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  7. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  8. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium chloride. 184.1138 Section 184.1138...

  9. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  10. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  11. 21 CFR 582.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Ammonium sulfate. 582.1143 Section 582.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1143 Ammonium sulfate. (a) Product. Ammonium sulfate. (b) Conditions of use. This...

  12. 21 CFR 582.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ammonium sulfate. 582.1143 Section 582.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1143 Ammonium sulfate. (a) Product. Ammonium sulfate. (b) Conditions of use. This...

  13. 21 CFR 582.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium sulfate. 582.1143 Section 582.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1143 Ammonium sulfate. (a) Product. Ammonium sulfate. (b) Conditions of use. This...

  14. 21 CFR 582.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ammonium sulfate. 582.1143 Section 582.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1143 Ammonium sulfate. (a) Product. Ammonium sulfate. (b) Conditions of use. This...

  15. 21 CFR 582.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Ammonium sulfate. 582.1143 Section 582.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1143 Ammonium sulfate. (a) Product. Ammonium sulfate. (b) Conditions of use. This...

  16. 21 CFR 556.375 - Maduramicin ammonium.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Tolerances for Residues of New Animal Drugs § 556.375 Maduramicin ammonium. A tolerance is established for residues of maduramicin ammonium in chickens as follows: (a) A tolerance for maduramicin ammonium...

  17. 21 CFR 556.375 - Maduramicin ammonium.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Tolerances for Residues of New Animal Drugs § 556.375 Maduramicin ammonium. A tolerance is established for residues of maduramicin ammonium in chickens as follows: (a) A tolerance for maduramicin ammonium...

  18. 21 CFR 556.375 - Maduramicin ammonium.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... residues of maduramicin ammonium in chickens as follows: (a) A tolerance for maduramicin ammonium (marker residue) in chickens is 0.38 parts per million in fat (target tissue). A tolerance refers to the... animals. (b) The safe concentrations for total maduramicin ammonium residues in uncooked edible...

  19. 21 CFR 582.1141 - Ammonium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  20. 21 CFR 582.1141 - Ammonium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  1. 21 CFR 582.1141 - Ammonium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  2. Extraction of urea and ammonium ion

    NASA Technical Reports Server (NTRS)

    Anselmi, R. T.; Husted, R. R.; Schulz, J. R.

    1977-01-01

    Water purification system keeps urea and ammonium ion concentration below toxic limits in recirculated water of closed loop aquatic habitat. Urea is first converted to ammonium ions and carbon dioxide by enzygmatic action. Ammonium ions are removed by ion exchange. Bioburden is controlled by filtration through 0.45 micron millipore filters.

  3. Phase diagram of ammonium nitrate

    NASA Astrophysics Data System (ADS)

    Dunuwille, M.; Yoo, C. S.

    2014-05-01

    Ammonium Nitrate (AN) has often subjected to uses in improvised explosive devices, due to its wide availability as a fertilizer and its capability of becoming explosive with slight additions of organic and inorganic compounds. Yet, the origin of enhanced energetic properties of impure AN (or AN mixtures) is neither chemically unique nor well understood -resulting in rather catastrophic disasters in the past1 and thereby a significant burden on safety in using ammonium nitrates even today. To remedy this situation, we have carried out an extensive study to investigate the phase stability of AN at high pressure and temperature, using diamond anvil cells and micro-Raman spectroscopy. The present results confirm the recently proposed phase IV-to-IV' transition above 17 GPa2 and provide new constraints for the melting and phase diagram of AN to 40 GPa and 400 °C.

  4. (2,4,6-Trimethyl­phen­yl){2-[N-(2,4,6-trimethyl­phen­yl)formamido]­eth­yl}ammonium chloride

    PubMed Central

    Ikhile, Monisola I.; Bala, Muhammad D.

    2012-01-01

    In the title salt, C21H29N2O+·Cl−, the benzene rings form a dihedral angle of 6.13 (1)°. In the crystal, N—H⋯Cl hydrogen bonds link the cations and anions into chains extending along the c axis. PMID:23468780

  5. Preparation and cytotoxicity of N,N,N-trimethyl chitosan/alginate beads containing gold nanoparticles.

    PubMed

    Martins, Alessandro F; Facchi, Suelen P; Monteiro, Johny P; Nocchi, Samara R; Silva, Cleiser T P; Nakamura, Celso V; Girotto, Emerson M; Rubira, Adley F; Muniz, Edvani C

    2015-01-01

    Polyelectrolyte complex beads based on N,N,N-trimethyl chitosan (TMC) and sodium alginate (ALG) were obtained. This biomaterial was characterised by FTIR, TGA/DTG, DSC and SEM analysis. The good properties of polyelectrolyte complex hydrogel beads were associated, for the first time, with gold nanoparticles (AuNPs). Through a straightforward methodology, AuNPs were encapsulated into the beads. The in vitro cytotoxicity assays on the Caco-2 colon cancer cells and healthy VERO cells showed that the beads presented good biocompatibility on both cell lines, whereas the beads loaded with gold nanoparticles (beads/AuNPs) was slightly cytotoxic on the Caco-2 and VERO cells. PMID:25159881

  6. Extent of shielding by counterions determines the bactericidal activity of N,N,N-trimethyl chitosan salts.

    PubMed

    Follmann, Heveline D M; Martins, Alessandro F; Nobre, Thatyane M; Bresolin, Joana D; Cellet, Thelma S P; Valderrama, Patrícia; Correa, Daniel S; Muniz, Edvani C; Oliveira, Osvaldo N

    2016-02-10

    In this study, we show that the bactericidal activity of quaternized chitosans (TMCs) with sulfate, acetate, and halide counterions against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) correlates with the "availability" of N-quaternized groups [-(+)N(CH3)3] in the TMCs backbones. N,N,N-trimethyl chitosan sulfate (TMCS) and N,N,N-trimethyl chitosan acetate (TMCAc) displayed the highest activities, probably due to their delocalized π system. Among TMCs with halide counterions, activity was higher for N,N,N-trimethyl chitosan chloride (TMCCl), whereas N,N,N-trimethyl chitosan iodide (TMCI) and N,N,N-trimethyl chitosan bromide (TMCBr) exhibited lower, similar values to each other. This is consistent with the shielding of -(+)N(CH3)3 groups inferred from chemical shifts for halide counterions in (1)HNMR spectra. We also demonstrate that TMCs with distinct bactericidal activities can be classified according to their vibrational spectra using principal component analysis. Taken together, these physicochemical characterization approaches represent a predictive tool for the bactericidal activity of chitosan derivatives. PMID:26686146

  7. Ammonium assmilation in spruce ectomycorrhizas

    SciTech Connect

    Chalot, M.; Brun, A.; Botton, B. ); Stewart, G. )

    1990-05-01

    Assimilation of labelled NH{sub 4}{sup +} into amino acids has been followed in ectomycorrhizal roots of spruce. Over an 18 h period of NH{sub 4}{sup +} feeding, Gln, Glu and Ala became the most abundant amino acids. Gln was also the most highly labelled amino acid during the experiment, followed by Glu and Ala. This result indicates that Gln synthesis is an important ammonium utilization reaction in spruce mycorrhizas. Addition of MSX to NH{sub 4}{sup +} fed mycorrhizas caused an inhibition of Gln accumulation with a corresponding increase in Glu, Ala and Asn levels. The supply of MSX induced a sharp diminution of {sup 15}N enrichment in both amino and amido groups of glutamine. In contrast, the {sup 15}N incorporation into Glu and derivatives (Ala and Asp) remained very high. This study demonstrates that the fungal glutamate dehydrogenase is quite operative in spruce ectomycorrhizas since it is able to sustain ammonium assimilation when glutamine synthetase is inhibited.

  8. Structural study of ammonium metatungstate

    SciTech Connect

    Christian, Joel B. Whittingham, M. Stanley

    2008-08-15

    Several techniques have been used to study the structure of the Keggin-type polyoxometalate salt ammonium metatungstate (AMT)-(NH{sub 4}){sub 6}[H{sub 2}W{sub 12}O{sub 40}]*nH{sub 2}O, a potential fuel cell catalyst. The dehydrated salt is comprised of a mixture of crystallites of different unit cells in a centered eutactic cubic configuration, with an average unit cell of a{approx_equal}12.295. Varied orientations of the Keggin ions in the cubic arrangement create the differences, and orientational variation within each unit cell size represents an energy well. Progressive hydration of each crystallite leads to expansion of the lattice, with the degree of expansion depending on the locations of the water added in relation to the Keggin ion, which is influenced by cation location and hydrogen bonding. The structural hypothesis is supported by electron diffraction of single and multicrystal samples, by powder density measurements, X-ray powder diffraction studies, synchrotron powder X-ray diffraction, and a priori structural modeling studies. Based on the structure, projected active site densities are compared with nanostructured platinum catalysts for fuel cell application. - Graphical abstract: The structure of ammonium metatungstate powders are highly dependent on hydration and POM molecule rotation, with cation and hydrogen bonding forces directing a mixture of structures that have been studied with bulk and single-crystal methods. The illustration shows Monte Carlo simulated anion structural disorder for the fully dehydrated form of the title compound.

  9. Phase Diagram of Ammonium Nitrate

    NASA Astrophysics Data System (ADS)

    Dunuwille, Mihindra; Yoo, Choong-Shik

    2013-06-01

    Ammonium Nitrate (AN) has often been subjected to uses in improvised explosive devices, due to its wide availability as a fertilizer and its capability of becoming explosive with slight additions of organic and inorganic compounds. Yet, the origin of enhanced energetic properties of impure AN (or AN mixtures) is neither chemically unique nor well understood - resulting in rather catastrophic disasters in the past1 and thereby a significant burden on safety, in using ammonium nitrates even today. To remedy this situation, we have carried out an extensive study to investigate the phase stability of AN, in different chemical environments, at high pressure and temperature, using diamond anvil cells and micro-Raman spectroscopy. The present results confirm the recently proposed phase IV-to-IV' transition above 15 GPa2 and provide new constraints for the melting and phase diagram of AN to 40 GPa and 673 K. The present study has been supported by the U.S. DHS under Award Number 2008-ST-061-ED0001.

  10. Nortriketones: Antimicrobial Trimethylated Acylphloroglucinols from Ma̅nuka (Leptospermum scoparium).

    PubMed

    Killeen, Daniel P; Larsen, Lesley; Dayan, Franck E; Gordon, Keith C; Perry, Nigel B; van Klink, John W

    2016-03-25

    Four trimethylated acylphloroglucinols (5-8) have been isolated from ma̅nuka (Leptospermum scoparium) foliage. Apart from myrigalone A (8), which has previously been isolated from European bog myrtle (Myrica gale), these compounds have not been characterized before. The nortriketones are structurally similar to the bioactive tetramethylated β-triketones from ma̅nuka, but have one less ring methyl group. Two oxidized trimethylated compounds, 9 and 10, were also isolated, but these are likely isolation artifacts. When evaluated for antibacterial activity against Gram-positive bacteria, myrigalone A (8) was slightly less potent (MIC 64 μg/mL) than the corresponding tetramethylated compound, grandiflorone (4) (MIC 16-32 μg/mL). Unlike their tetramethylated analogues, the nortriketones were inactive against the herbicide target enzyme p-hydroxyphenylpyruvate dioxygenase. The Raman spectra of leaf oil glands in different ma̅nuka varieties can be used to distinguish plants that contain nortriketones from those that accumulate triketones. PMID:26731565

  11. Multiple-Site Trimethylation of Ribosomal Protein L11 by the PrmA Methyltransferase

    PubMed Central

    Demirci, Hasan; Gregory, Steven T.; Dahlberg, Albert E.; Jogl, Gerwald

    2008-01-01

    SUMMARY Ribosomal protein L11 is a universally conserved component of the large subunit, and plays a significant role during initiation, elongation, and termination of protein synthesis. In Escherichia coli, the lysine methyltransferase PrmA trimethylates the N-terminal α-amino group and the ε-amino groups of Lys3 and Lys39. Here, we report four PrmA-L11 complex structures in different orientations with respect to the PrmA active site. Two structures capture the L11 N-terminal α-amino group in the active site in a trimethylated postcatalytic state and in a dimethylated state with bound S-adenosyl-L-homocysteine. Two other structures show L11 in a catalytic orientation to modify Lys39 and in a noncatalytic orientation. The comparison of complex structures in different orientations with a minimal substrate recognition complex shows that the binding mode remains conserved in all L11 orientations, and that substrate orientation is brought about by the unusual interdomain flexibility of PrmA. PMID:18611379

  12. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  13. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  14. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  15. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  16. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  17. Equilibrium studies of sodium-ammonium potassium-ammonium, and calcium-ammonium exchanges on clinoptilolite zeolite

    SciTech Connect

    Jama, M.A.; Yuecel, H. )

    1989-12-01

    Forward and reverse ion-exchange isotherms for the binary sodium-ammonium, potassium-ammonium, and calcium-ammonium systems on clinoptilolite have been measured in aqueous solutions at a total concentration of 0.1 equiv/dm{sup 3} and at 298 K. Prior to exchange experiments it was attempted to prepare homoionic forms of the zeolite by exhaustive treatments with appropriate salt solutions of cations. With no binary exchanges, full replacement of the cation by the ammonium ion is observed, which conflicts with some earlier work on clinoptilolite. Despite the observed partial exchange levels, clinoptilolite shows a very high preference for ammonium ion over sodium and calcium but not over potassium. Thermodynamic values for the exchanges were calculated and compared with data in the literature. Both the selectivity and thermodynamic affinity sequence, in agreement with previous work reported in the literature, are K{sup +} > NH{sub 4}{sup +} > Na{sup +} > Ca{sup 2+}.

  18. Preparation of the chitosan grafted poly (quaternary ammonium)/Fe3O4 nanoparticles and its adsorption performance for food yellow 3.

    PubMed

    Yu, Chen; Geng, Jianqiang; Zhuang, Yunxia; Zhao, Jian; Chu, Liqiu; Luo, Xiaoxuan; Zhao, Ying; Guo, Yanwen

    2016-11-01

    Chitosan and its derivatives can be used to modify magnetic materials to promote the adsorption properties of the magnetic materials and avoid the weakness of chitosan and its derivatives. In the present study, chitosan grafted poly(trimethyl allyl ammonium chloride) (CTS-g-PTMAAC) was prepared by graft copolymerization; then it was coated on the surfaces of the sodium citrate coated Fe3O4 nanoparticles (SC-Fe3O4) to prepare a novel composite CTS-g-PTMAAC/SC-Fe3O4 magnetic nanoparticles, with which possesses abundant surface positive charges. The structure and properties of the CTS-g-PTMAAC/SC-Fe3O4 composite magnetic nanoparticles were characterized by FTIR, TEM, VSM, and zeta potential. The dye adsorption characteristics of the CTS-g-PTMAAC/SC-Fe3O4 nanoparticles were determined using the food yellow 3 aqueous solutions as a model food effluent. Effect of pH of the dye solution on the adsorption of food yellow 3 was determined and compared with N-2-hydroxylpropyl trimethyl ammonium chloride chitosan coated sodium citrate-Fe3O4 (CTS-g-HTCC/SC-Fe3O4) composite magnetic nanoparticles. The adsorption kinetics, adsorption isotherms, adsorption thermodynamics, and desorption and reusability of the magnetic nanoparticles were investigated. PMID:27516279

  19. Biodegradation of rocket propellant waste, ammonium perchlorate

    NASA Technical Reports Server (NTRS)

    Naqvi, S. M. Z.; Latif, A.

    1975-01-01

    The short term effects of ammonium perchlorate on selected organisms were studied. A long term experiment was also designed to assess the changes incurred by ammonium perchlorate on the nitrogen and chloride contents of soil within a period of 3 years. In addition, an attempt was made to produce methane gas from anaerobic fermentation of the aquatic weed, Alternanthera philoxeroides.

  20. 76 FR 62311 - Ammonium Nitrate Security Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-07

    ... FR 64280 (advance notice of proposed rulemaking); 76 FR 46908 (notice of proposed rulemaking... Program Web site in mid-October at http://www.dhs.gov/ files/ ] programs/ammonium-nitrate-security-program...; ] DEPARTMENT OF HOMELAND SECURITY Office of the Secretary 6 CFR Part 31 RIN 1601-AA52 Ammonium Nitrate...

  1. 76 FR 46907 - Ammonium Nitrate Security Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-03

    ...This proposed rule would implement anti-terrorism measures to better secure the homeland. The Department of Homeland Security would regulate the sale and transfer of ammonium nitrate pursuant to section 563 of the Fiscal Year 2008 Department of Homeland Security Appropriations Act with the purpose of preventing the use of ammonium nitrate in an act of terrorism. This proposed rule seeks......

  2. Ammonium nonanoate broadcast application over onions

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Ammonium nonanoate occurs in nature and is primarily formed from biodegradation of higher fatty acids. Racer (40% ammonium nonaoate) is a potential contact herbicide for weed control in organic crop production. Field research was conducted in southeast Oklahoma (Atoka County, Lane, OK) to determin...

  3. Interaction of cationic dodecyl-trimethyl-ammonium bromide with oxy-HbGp by isothermal titration and differential scanning calorimetric studies: Effect of proximity of isoelectric point.

    PubMed

    Alves, Fernanda Rosa; Carvalho, Francisco Adriano O; Carvalho, José Wilson P; Tabak, Marcel

    2016-04-01

    In this work, isothermal titration and differential scanning calorimetric methods, in combination with pyrene fluorescence emission and dynamic light scattering have been used to investigate the interaction of dodecyltrimethylammonium bromide (DTAB) with the giant extracellular Glossoscolex paulistus hemoglobin (HbGp) in the oxy-form, at pH values around the isoelectric point (pI ≈ 5.5). Our ITC results have shown that the interaction of DTAB with the hemoglobin is more intense at pH 7.0, with a smaller cac (critical aggregation concentration) value. The increase of protein concentration does not influence the cac value of the interaction, at both pH values. Therefore, the beginning of the DTAB-oxy-HbGp premicellar aggregates formation, in the cac region, is not affected by the increase of protein concentration. HSDSC studies show higher Tm values at pH 5.0, in the absence and presence of DTAB, when compared with pH 7.0. Furthermore, at pH 7.0, an aggregation process is observed with DTAB in the range from 0.75 to 1.5 mmol/L, noticed by the exothermic peak, and similar to that observed for pure oxy-HbGp, at pH 5.0, and in the presence of DTAB. DLS melting curves show a decrease on the hemoglobin thermal stability for the oxy-HbGp-DTAB mixtures and formation of larger aggregates, at pH 7.0. Our present data, together with previous results, support the observation that the protein structural changes, at pH 7.0, occur at smaller DTAB concentrations, as compared with pH 5.0, due to the acidic pI of protein that favors the oxy-HbGp-cationic surfactant interaction at neutral pH. PMID:26574155

  4. Evolution of Electrogenic Ammonium Transporters (AMTs)

    PubMed Central

    McDonald, Tami R.; Ward, John M.

    2016-01-01

    The ammonium transporter gene family consists of three main clades, AMT, MEP, and Rh. The evolutionary history of the AMT/MEP/Rh gene family is characterized by multiple horizontal gene transfer events, gene family expansion and contraction, and gene loss; thus the gene tree for this family of transporters is unlike the organismal tree. The genomes of angiosperms contain genes for both electrogenic and electroneutral ammonium transporters, but it is not clear how far back in the land plant lineage electrogenic ammonium transporters occur. Here, we place Marchantia polymorpha ammonium transporters in the AMT/MEP/Rh phylogeny and we show that AMTs from the liverwort M. polymorpha are electrogenic. This information suggests that electrogenic ammonium transport evolved at least as early as the divergence of bryophytes in the land plant lineage. PMID:27066024

  5. Evolution of Electrogenic Ammonium Transporters (AMTs).

    PubMed

    McDonald, Tami R; Ward, John M

    2016-01-01

    The ammonium transporter gene family consists of three main clades, AMT, MEP, and Rh. The evolutionary history of the AMT/MEP/Rh gene family is characterized by multiple horizontal gene transfer events, gene family expansion and contraction, and gene loss; thus the gene tree for this family of transporters is unlike the organismal tree. The genomes of angiosperms contain genes for both electrogenic and electroneutral ammonium transporters, but it is not clear how far back in the land plant lineage electrogenic ammonium transporters occur. Here, we place Marchantia polymorpha ammonium transporters in the AMT/MEP/Rh phylogeny and we show that AMTs from the liverwort M. polymorpha are electrogenic. This information suggests that electrogenic ammonium transport evolved at least as early as the divergence of bryophytes in the land plant lineage. PMID:27066024

  6. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  7. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  8. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  9. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  10. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  11. The nucleation kinetics of ammonium metavanadate precipitated by ammonium chloride

    NASA Astrophysics Data System (ADS)

    Du, Guangchao; Sun, Zhaohui; Xian, Yong; Jing, Han; Chen, Haijun; Yin, Danfeng

    2016-05-01

    The nucleation kinetics of ammonium metavanadate (NH4VO3) was investigated under conditions of the simulated process for precipitation of NH4VO3 from the vanadium-containing solution. Induction periods for the nucleation of NH4VO3 were experimentally determined as a function of supersaturation at temperatures from 30 to 45 °C. Using the classical nucleation theory, the interfacial tension between NH4VO3 and supersaturated solution, the nucleation rate and critical radius of nucleus for the homogeneous nucleation of NH4VO3 were estimated. With temperature increasing, the calculated interfacial tension gradually decreased from 29.78 mJ/m2 at 30 °C to 23.66 mJ/m2 at 45 °C. The nucleation rate was found to proportionally increase but the critical radius of nucleus exponentially decreased, with increase in supersaturation ratio at a constant temperature. The activation energy for NH4VO3 nucleation was obtained from the relationship between temperature and induction period, ranging from 79.17 kJ/mol at S=25 to 115.50 kJ/mol at S=15. FT-IR and Raman spectrum indicated that the crystals obtained in the precipitation process were NH4VO3.

  12. Induction of thermotropic bicontinuous cubic phases in liquid-crystalline ammonium and phosphonium salts.

    PubMed

    Ichikawa, Takahiro; Yoshio, Masafumi; Hamasaki, Atsushi; Taguchi, Satomi; Liu, Feng; Zeng, Xiang-bing; Ungar, Goran; Ohno, Hiroyuki; Kato, Takashi

    2012-02-01

    Two series of wedge-shaped onium salts, one ammonium and the other phosphonium, having 3,4,5-tris(alkyloxy)benzyl moieties, exhibit thermotropic bicontinuous "gyroid" cubic (Cub(bi)) and hexagonal columnar liquid-crystalline (LC) phases by nanosegregation between ionophilic and ionophobic parts. The alkyl chain lengths on the cationic moieties, anion species, and alkyl chain lengths on the benzyl moieties have crucial effects on their thermotropic phase behavior. For example, triethyl-[3,4,5-tris(dodecyloxy)benzyl]ammonium hexafluorophosphate forms the thermotropic Ia3d Cub(bi) LC phase, whereas an analogous compound with trifluoromethanesulfonate anion shows no LC properties. Synchrotron small-angle diffraction intensities from the Ia3d Cub(bi) LC materials provide electron density maps in the bulk state. The resulting maps show convincingly that the Ia3d Cub(bi) structure is composed of three-dimensionally interconnected ion nanochannel networks surrounded by aliphatic domains. A novel differential mapping technique has been applied successfully. The map of triethyl-[3,4,5-tris(decyloxy)benzyl]ammonium tetrafluoroborate has been subtracted from that of the analogous ammonium salt with hexafluorophosphate anion in the Ia3d Cub(bi) phases. The differential map shows that the counteranions are located in the core of the three-dimensionally interconnected nanochannel networks. Changing from trimethyl- via triethyl- to tripropylammonium cation changes the phase from columnar to Cub(bi) to no mesophase, respectively. This sensitivity to the widened shape for the narrow end of the molecule is explained successfully by the previously proposed semiquantitative geometric model based on the radial distribution of volume in wedge-shaped molecules. The LC onium salts dissolve lithium tetrafluoroborate without losing the Ia3d Cub(bi) LC phase. The Cub(bi) LC materials exhibit efficient ion-transporting behavior as a result of their 3D interconnected ion nanochannel networks

  13. Effects of quaternary ammonium-methacrylates on the mechanical properties of unfilled resins

    PubMed Central

    Hoshika, Tomohiro; Nishitani, Yoshihiro; Yoshiyama, Masahiro; Key, William O.; William, Brantley; Agee, Kelli A.; Breschi, Lorenzo; Cadenaro, Milena; Tay, Franklin R.; Rueggeberg, Frederick; Pashley, David H.

    2014-01-01

    Objectives Adding antimicrobial/anti-MMP quaternary ammonium methacrylates (QAMs) to comonomer blends should not weaken the mechanical properties of dental resins. This work evaluated the degree conversion and mechanical properties of BisGMA/TEGDMA/HEMA (60:30:10) containing 0–15 mass% QAMs A–E (A:2-acryloxyethyltrimethyl ammonium chloride; B:[3-(methacryloylamino)propyl]trimethylammonium chloride; C:[2-(methacryloxy)ethyl] trimethyl ammonium chloride; D:diallyldimethyl ammonium chloride; E:2-(methacryloyloxy) ethyltrimethyl ammonium methyl sulfate. Methods Unfilled resins with and without QAM were placed on ATR-FTIR and light-polymerized for 20 s in a thin film t 30°C. Unfilled resin beams were casted from square hollow glass tubings. Half of the beams were tested after 3 days of drying (control); the other half were tested wet after 3 days of water storage. Results Addition of QAMs in control resins significantly increased conversion 600s after light termination, with the exception of 5% MAPTAC (p<0.05). Increase of QAM content within a formulation significantly increased conversion. Control beams gave dry Young’s moduli of ~700 MPa. Addition of 5, 10 or 15 mass% QAMs produced significant reductions in dry Young’s moduli except for 5% B or C. 15 mass% A, B and C lowered the wet Young’s moduli of the resin beams by more than 30%. The ultimate tensile stress (UTS) of control dry resin was 89±11 MPa. Addition of 5–10 mass% QAMs had no adverse effect on the dry UTS. After water storage, the UTS of all resin blends fell significantly (p<0.05), especially when 15 wt% QAMs was added. Control dry beams gave fracture toughness (KIC) values of 0.88±0.1 MPa√m. Wet values were significantly higher at 1.02±0.06 (p<0.05). KIC of dry beams varied from 0.85±0.08 at 5% QAMs to 0.49±0.05 at 15% QAMs. Wet beams gave KIC values of 1.02±0.06 MPa√m that fell to 0.23±0.01 at 15% QAMs. Significance Addition of 10% QAMs increased the degree of conversion of

  14. 40 CFR 721.7270 - 1-propanaminium, 3-amino-, N,N,N-trimethyl-N-soya acyl derivs., chloride.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false 1-propanaminium, 3-amino-, N,N,N-trimethyl-N-soya acyl derivs., chloride. 721.7270 Section 721.7270 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific...

  15. 40 CFR 721.7270 - 1-propanaminium, 3-amino-, N,N,N-trimethyl-N-soya acyl derivs., chloride.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false 1-propanaminium, 3-amino-, N,N,N-trimethyl-N-soya acyl derivs., chloride. 721.7270 Section 721.7270 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.7270 1-propanaminium, 3-amino-,...

  16. 40 CFR 721.7270 - 1-propanaminium, 3-amino-, N,N,N-trimethyl-N-soya acyl derivs., chloride.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false 1-propanaminium, 3-amino-, N,N,N-trimethyl-N-soya acyl derivs., chloride. 721.7270 Section 721.7270 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.7270 1-propanaminium, 3-amino-,...

  17. 40 CFR 721.7270 - 1-propanaminium, 3-amino-, N,N,N-trimethyl-N-soya acyl derivs., chloride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false 1-propanaminium, 3-amino-, N,N,N-trimethyl-N-soya acyl derivs., chloride. 721.7270 Section 721.7270 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.7270 1-propanaminium, 3-amino-,...

  18. 40 CFR 721.7270 - 1-propanaminium, 3-amino-, N,N,N-trimethyl-N-soya acyl derivs., chloride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false 1-propanaminium, 3-amino-, N,N,N-trimethyl-N-soya acyl derivs., chloride. 721.7270 Section 721.7270 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.7270 1-propanaminium, 3-amino-,...

  19. Histone variant H3.3 provides the heterochromatic H3 lysine 9 tri-methylation mark at telomeres

    PubMed Central

    Udugama, Maheshi; M. Chang, Fiona T.; Chan, F. Lyn; Tang, Michelle C.; Pickett, Hilda A.; R. McGhie, James D.; Mayne, Lynne; Collas, Philippe; Mann, Jeffrey R.; Wong, Lee H.

    2015-01-01

    In addition to being a hallmark at active genes, histone variant H3.3 is deposited by ATRX at repressive chromatin regions, including the telomeres. It is unclear how H3.3 promotes heterochromatin assembly. We show that H3.3 is targeted for K9 trimethylation to establish a heterochromatic state enriched in trimethylated H3.3K9 at telomeres. In H3f3a−/− and H3f3b−/− mouse embryonic stem cells (ESCs), H3.3 deficiency results in reduced levels of H3K9me3, H4K20me3 and ATRX at telomeres. The H3f3b−/− cells show increased levels of telomeric damage and sister chromatid exchange (t-SCE) activity when telomeres are compromised by treatment with a G-quadruplex (G4) DNA binding ligand or by ASF1 depletion. Overexpression of wild-type H3.3 (but not a H3.3K9 mutant) in H3f3b−/− cells increases H3K9 trimethylation level at telomeres and represses t-SCE activity induced by a G4 ligand. This study demonstrates the importance of H3.3K9 trimethylation in heterochromatin formation at telomeres. It provides insights into H3.3 function in maintaining integrity of mammalian constitutive heterochromatin, adding to its role in mediating transcription memory in the genome. PMID:26304540

  20. Histone H3 lysine 9 trimethylation and HP1γ favor inclusion of alternative exons.

    PubMed

    Saint-André, Violaine; Batsché, Eric; Rachez, Christophe; Muchardt, Christian

    2011-03-01

    Pre-messenger RNAs (pre-mRNAs) maturation is initiated cotranscriptionally. It is therefore conceivable that chromatin-borne information participates in alternative splicing. Here we find that elevated levels of trimethylation of histone H3 on Lys9 (H3K9me3) are a characteristic of the alternative exons of several genes including CD44. On this gene the chromodomain protein HP1γ, frequently defined as a transcriptional repressor, facilitates inclusion of the alternative exons via a mechanism involving decreased RNA polymerase II elongation rate. In addition, accumulation of HP1γ on the variant region of the CD44 gene stabilizes association of the pre-mRNA with the chromatin. Altogether, our data provide evidence for localized histone modifications impacting alternative splicing. They further implicate HP1γ as a possible bridging molecule between the chromatin and the maturating mRNA, with a general impact on splicing decisions. PMID:21358630

  1. Uptake and transport of insulin across intestinal membrane model using trimethyl chitosan coated insulin niosomes.

    PubMed

    Moghassemi, Saeid; Parnian, Ehsan; Hakamivala, Amirhossien; Darzianiazizi, Maedeh; Vardanjani, Marzieh Mowlavi; Kashanian, Susan; Larijani, Bagher; Omidfar, Kobra

    2015-01-01

    This study reports the development of a highly stable niosomal nanostructure based on Span 60/cholesterol (CH)/N-trimethyl chitosan (TMC) system and its potential application for oral delivery of insulin. Insulin loaded niosomes were prepared by reversed-phase evaporation and TMC coating was performed by incubation of niosomal suspensions with TMC solution. The efficiency of nanoparticulate delivery system in enhancement of insulin permeation was evaluated by Caco-2 cell monolayer as intestinal membrane models. The prepared niosomes were characterized for entrapment efficiency (EE), particle size, zeta potential and stability. The particles were between 100 and 180 nm in diameter, and they were stable for over 60 days at 4 °C. Insulin permeability through Caco-2 cell monolayer was enhanced 4-fold by niosomal nanoparticles, compared with insulin alone. Further work is demanded to optimize this formulation with the object of maximizing its potential to facilitate oral delivery of insulin. PMID:25491995

  2. Biomaterials based on N,N,N-trimethyl chitosan fibers in wound dressing applications.

    PubMed

    Zhou, Zhongzheng; Yan, Dong; Cheng, Xiaojie; Kong, Ming; Liu, Ya; Feng, Chao; Chen, Xiguang

    2016-08-01

    In the present work, N,N,N-trimethyl chitosan (TMC) fibers were synthesized successfully and the resulting quaternized materials were characterized by FTIR. The designed TMC fibers with different degree of quaternization achieved high water absorption capability. In antibacterial activity study, TMC fibers showed high antibacterial activity than chitosan fibers against the gram-negative bacteria Escherichia coli (>63%) and gram-positive bacteria Staphylococcus aureus (>99%). TMC fibers exhibited no obvious cytotoxicity to mouse embryo fibroblast cells with low extraction concentrations (<0.05g/mL). In animal wound healing test, TMC2 fibers could significantly enhance wound re-epithelialization and contraction compared with the control (chitosan fibers). In conclusion, TMC fibers have a potential to be used as wound dressing materials. PMID:26893050

  3. Structural basis of histone H3K27 trimethylation by an active polycomb repressive complex 2.

    PubMed

    Jiao, Lianying; Liu, Xin

    2015-10-16

    Polycomb repressive complex 2 (PRC2) catalyzes histone H3K27 trimethylation (H3K27me3), a hallmark of gene silencing. Here we report the crystal structures of an active PRC2 complex of 170 kilodaltons from the yeast Chaetomium thermophilum in both basal and stimulated states, which contain Ezh2, Eed, and the VEFS domain of Suz12 and are bound to a cancer-associated inhibiting H3K27M peptide and a S-adenosyl-l-homocysteine cofactor. The stimulated complex also contains an additional stimulating H3K27me3 peptide. Eed is engulfed by a belt-like structure of Ezh2, and Suz12(VEFS) contacts both of these two subunits to confer an unusual split active SET domain for catalysis. Comparison of PRC2 in the basal and stimulated states reveals a mobile Ezh2 motif that responds to stimulation to allosterically regulate the active site. PMID:26472914

  4. Ionization states, cellular toxicity and molecular modeling studies of midazolam complexed with trimethyl-β-cyclodextrin.

    PubMed

    Shityakov, Sergey; Sohajda, Tamás; Puskás, István; Roewer, Norbert; Förster, Carola; Broscheit, Jens-Albert

    2014-01-01

    We investigated the ionization profiles for open-ring (OR) and closed-ring (CR) forms of midazolam and drug-binding modes with heptakis-(2,3,6-tri-O-methyl)-β-cyclodextrin (trimethyl-β-cyclodextrin; TRIMEB) using molecular modeling techniques and quantum mechanics methods. The results indicated that the total net charges for different molecular forms of midazolam tend to be cationic for OR and neutral for CR at physiological pH levels. The thermodynamic calculations demonstrated that CR is less water-soluble than OR, mainly due to the maximal solvation energy (ΔG(CR)(solv = -9.98 kcal·mol ⁻¹), which has a minimal ΔG(OR)(solv) of -67.01 kcal·mol⁻¹. A cell viability assay did not detect any signs of TRIMEB and OR/CR-TRIMEB complex toxicity on the cEND cells after 24 h of incubation in either Dulbecco's Modified Eagles Medium or in heat-inactivated human serum. The molecular docking studies identified the more flexible OR form of midazolam as being a better binder to TRIMEB with the fluorophenyl ring introduced inside the amphiphilic cavity of the host molecule. The OR binding affinity was confirmed by a minimal Gibbs free energy of binding (ΔG(bind)) value of -5.57 ± 0.02 kcal·mol⁻¹, an equilibrium binding constant (K(b)) of 79.89 ± 2.706 μM, and a ligand efficiency index (LE(lig)) of -0.21 ± 0.001. Our current data suggest that in order to improve the clinical applications of midazolam via its complexation with trimethyl-β-cyclodextrin to increase drug's overall aqueous solubility, it is important to concern the different forms and ionization states of this anesthetic. All mean values are indicated with their standard deviations. PMID:25338177

  5. Positively Charged Chitosan and N-Trimethyl Chitosan Inhibit Aβ40 Fibrillogenesis.

    PubMed

    Liu, Haiyang; Ojha, Bimlesh; Morris, Clifford; Jiang, Mengting; Wojcikiewicz, Ewa P; Rao, Praveen P N; Du, Deguo

    2015-08-10

    Amyloid fibrils, formed by aggregation of improperly folded or intrinsically disordered proteins, are closely related with the pathology of a wide range of neurodegenerative diseases. Hence, there is a great deal of interest in developing molecules that can bind and inhibit amyloid formation. In this regard, we have investigated the effect of two positively charged polysaccharides, chitosan (CHT) and its quarternary derivative N-trimethyl chitosan chloride (TMC), on the aggregation of Aβ40 peptide. Our aggregation kinetics and atomic force microscopy (AFM) studies show that both CHT and TMC exhibit a concentration-dependent inhibiting activity on Aβ40 fibrillogenesis. Systematic pH-dependent studies demonstrate that the attractive electrostatic interactions between the positively charged moieties in CHT/TMC and the negatively charged residues in Aβ40 play a key role in this inhibiting activity. The stronger inhibiting activity of TMC than CHT further suggests the importance of charge density of the polymer chain in interacting with Aβ40 and blocking the fibril formation. The possible interactions between CHT/TMC and Aβ40 are also revealed at the atomic level by molecular docking simulation, showing that the Aβ40 monomer could be primarily stabilized by electrostatic interactions with charged amines of CHT and quaternary amines of TMC, respectively. Binding of CHT/TMC on the central hydrophobic core region of Aβ40 peptide may be responsible for blocking the propagation of the nucleus to form fibrillar structures. These results suggest that incorporation of sugar units such as d-glucosamine and N-trimethyl-d-glucosamine into polymer structural template may serve as a new strategy for designing novel antiamyloid molecules. PMID:26125953

  6. Study of acetylation on Ser/Thr/Tyr/Lys, and trimethylation on Lys using electrospray tandem mass spectrometry

    NASA Astrophysics Data System (ADS)

    Li, Yan; Ball, Haydn L.

    2009-03-01

    Post-translational modifications (PTM) corresponding to a gain in mass of 42 Da are of increasing interest. It has been widely recognized that acetylation and trimethylation on Lys regulates gene transcription and silencing. In addition, it was recently discovered that acetylation of Ser and Thr residues on a signaling kinase can block its activation. In this paper, three series of model peptides were chemically synthesized to generate comparative MS data. Electrospray collision-induced dissociation tandem mass spectrometry was used to characterize the fragmentation pattern of acetylation on Ser, Thr, and Tyr residues. In separate experiments, the fragmentation pattern and efficiency were studied for acetylation and trimethylation on Lys. Our results confirmed those previously reported, that a characteristic immonium ion at m/z 126 corresponds to an acetylated Lys, and we further differentiated acetylation from trimethylation by their effects on peptide fragmentation efficiency. With the same primary sequence, a trimethylated peptide requires higher energy to fragment compared to the acetylated analogue. For peptides containing acetylated Ser, the y-60 and b-60 ions are commonly observed when the acetylation site is at, or close to, the C-terminus or N-terminus of the daughter ion, respectively; for acetylated Thr, in addition to y-60 and b-60 ions, y-42 ions are usually dominant. The loss of 42 Da and 60 Da can correspond to the loss of CH2CO through deacetylation and CH3COOH through [beta]-elimination, respectively. Meanwhile, loss of 42 Da and 18 Da individually can also contribute to the loss of 60 Da. When peptide containing acetylated Tyr/Lys is fragmented, the acetyl group remains attached to their respective side-chains. The fragmentation pattern was similar whether the acetylation site was close to C-terminus or N-terminus of the peptide. This study provides a better understanding of the MSMS fragmentation character of peptides with acetylation on Ser, Thr

  7. 21 CFR 73.1298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by oxidizing... product is filtered, washed, and dried. The pigment consists principally of ferric ammonium...

  8. 21 CFR 73.1298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by oxidizing... product is filtered, washed, and dried. The pigment consists principally of ferric ammonium...

  9. 21 CFR 73.1298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by oxidizing... product is filtered, washed, and dried. The pigment consists principally of ferric ammonium...

  10. 21 CFR 73.1298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by oxidizing... product is filtered, washed, and dried. The pigment consists principally of ferric ammonium...

  11. 21 CFR 73.1298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by oxidizing... product is filtered, washed, and dried. The pigment consists principally of ferric ammonium...

  12. Ammonium Hydrosulfide: Coloring Jupiter's Clouds

    NASA Astrophysics Data System (ADS)

    Loeffler, Mark J.; Hudson, Reggie L.; Chanover, Nancy J.; Simon, Amy A.

    2015-11-01

    The appearance and composition of Jupiter’s Great Red Spot (GRS) have been studied for over a century, yet there still is no consensus for what is causing the GRS’s color. As the GRS is believed to originate in tropospheric clouds, it seems likely that one or more cloud components may contribute to the GRS's color. Recently, we have begun to investigate whether either ammonium hydrosulfide (NH4SH), a predicted cloud component, or its radiation-chemical products can produce color and/or an ultraviolet-visible spectrum similar to what has been observed on Jupiter via remote sensing (e.g., Simon et al., 2015). Our initial experiments relied on infrared spectroscopy to quantify the radiolytic and thermal stability of NH4SH and to identify the new chemical products formed during MeV ion irradiation (Loeffler et al., 2015). This DPS presentation will cover some of our most recent results detailing the ultraviolet-visible spectral and color changes observed during irradiation and post-irradiation warming of NH4SH ices. This work is funded by NASA’s Outer Planets and Planetary Atmospheres programs.

  13. Phase diagram of ammonium nitrate

    SciTech Connect

    Dunuwille, Mihindra; Yoo, Choong-Shik

    2013-12-07

    Ammonium Nitrate (AN) is a fertilizer, yet becomes an explosive upon a small addition of chemical impurities. The origin of enhanced chemical sensitivity in impure AN (or AN mixtures) is not well understood, posing significant safety issues in using AN even today. To remedy the situation, we have carried out an extensive study to investigate the phase stability of AN and its mixtures with hexane (ANFO–AN mixed with fuel oil) and Aluminum (Ammonal) at high pressures and temperatures, using diamond anvil cells (DAC) and micro-Raman spectroscopy. The results indicate that pure AN decomposes to N{sub 2}, N{sub 2}O, and H{sub 2}O at the onset of the melt, whereas the mixtures, ANFO and Ammonal, decompose at substantially lower temperatures. The present results also confirm the recently proposed phase IV-IV{sup ′} transition above 17 GPa and provide new constraints for the melting and phase diagram of AN to 40 GPa and 400°C.

  14. Biodegradation of rocket propellent waste, ammonium perchlorate

    NASA Technical Reports Server (NTRS)

    Naqui, S. M. Z.

    1975-01-01

    The impact of the biodegradation rate of ammonium perchlorate on the environment was studied in terms of growth, metabolic rate, and total biomass of selected animal and plant species. Brief methodology and detailed results are presented.

  15. Electrochemically and bioelectrochemically induced ammonium recovery.

    PubMed

    Gildemyn, Sylvia; Luther, Amanda K; Andersen, Stephen J; Desloover, Joachim; Rabaey, Korneel

    2015-01-01

    Streams such as urine and manure can contain high levels of ammonium, which could be recovered for reuse in agriculture or chemistry. The extraction of ammonium from an ammonium-rich stream is demonstrated using an electrochemical and a bioelectrochemical system. Both systems are controlled by a potentiostat to either fix the current (for the electrochemical cell) or fix the potential of the working electrode (for the bioelectrochemical cell). In the bioelectrochemical cell, electroactive bacteria catalyze the anodic reaction, whereas in the electrochemical cell the potentiostat applies a higher voltage to produce a current. The current and consequent restoration of the charge balance across the cell allow the transport of cations, such as ammonium, across a cation exchange membrane from the anolyte to the catholyte. The high pH of the catholyte leads to formation of ammonia, which can be stripped from the medium and captured in an acid solution, thus enabling the recovery of a valuable nutrient. The flux of ammonium across the membrane is characterized at different anolyte ammonium concentrations and currents for both the abiotic and biotic reactor systems. Both systems are compared based on current and removal efficiencies for ammonium, as well as the energy input required to drive ammonium transfer across the cation exchange membrane. Finally, a comparative analysis considering key aspects such as reliability, electrode cost, and rate is made. This video article and protocol provide the necessary information to conduct electrochemical and bioelectrochemical ammonia recovery experiments. The reactor setup for the two cases is explained, as well as the reactor operation. We elaborate on data analysis for both reactor types and on the advantages and disadvantages of bioelectrochemical and electrochemical systems. PMID:25651406

  16. 21 CFR 172.430 - Iron ammonium citrate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Iron ammonium citrate. 172.430 Section 172.430... CONSUMPTION Anticaking Agents § 172.430 Iron ammonium citrate. Iron ammonium citrate may be safely used in... human consumption so that the level of iron ammonium citrate does not exceed 25 parts per million...

  17. 21 CFR 573.560 - Iron ammonium citrate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Iron ammonium citrate. 573.560 Section 573.560... Additive Listing § 573.560 Iron ammonium citrate. Iron ammonium citrate may be safely used in animal feed... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  18. 21 CFR 172.430 - Iron ammonium citrate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Iron ammonium citrate. 172.430 Section 172.430... CONSUMPTION Anticaking Agents § 172.430 Iron ammonium citrate. Iron ammonium citrate may be safely used in... human consumption so that the level of iron ammonium citrate does not exceed 25 parts per million...

  19. 21 CFR 573.560 - Iron ammonium citrate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Iron ammonium citrate. 573.560 Section 573.560... Additive Listing § 573.560 Iron ammonium citrate. Iron ammonium citrate may be safely used in animal feed... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  20. 21 CFR 573.560 - Iron ammonium citrate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Iron ammonium citrate. 573.560 Section 573.560... Additive Listing § 573.560 Iron ammonium citrate. Iron ammonium citrate may be safely used in animal feed... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  1. 21 CFR 573.560 - Iron ammonium citrate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Iron ammonium citrate. 573.560 Section 573.560... Additive Listing § 573.560 Iron ammonium citrate. Iron ammonium citrate may be safely used in animal feed... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  2. 21 CFR 172.430 - Iron ammonium citrate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Iron ammonium citrate. 172.430 Section 172.430 Food... Anticaking Agents § 172.430 Iron ammonium citrate. Iron ammonium citrate may be safely used in food in... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  3. 21 CFR 172.430 - Iron ammonium citrate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Iron ammonium citrate. 172.430 Section 172.430... CONSUMPTION Anticaking Agents § 172.430 Iron ammonium citrate. Iron ammonium citrate may be safely used in... human consumption so that the level of iron ammonium citrate does not exceed 25 parts per million...

  4. 21 CFR 573.560 - Iron ammonium citrate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Iron ammonium citrate. 573.560 Section 573.560... Additive Listing § 573.560 Iron ammonium citrate. Iron ammonium citrate may be safely used in animal feed... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  5. Reaction of 2,5-bis(methoxycarbonyl)-3,4-diphenylcyclopentadienone with phosphonoacetic acid trimethyl ester

    SciTech Connect

    Fuzhenkova, A.V.; Galyautdinov, N.I.; Vagapova, N.N.

    1987-12-20

    It is known that the ease of the 1,5 migration of groups in cyclopentadienes is associated with their acceptor power. On the basis of this and in view of the tendency of phosphonoacetic acid triester to react at the C=O group of ..cap alpha..-enols (Wittig-Horner reaction), the authors studied the reactions of phosphonoacetic acid trimethyl ester with cyclones. 2,5-Bis(methoxycarbonyl)-3,4-diphenylcyclopentadienone reacts with the sodium derivative of phosphonoacetic acid trimethyl ester with the formation of adducts in which the carbanion center of the reagent is linked to the C/sup 2/ atom of cyclopentadienone. The IR spectra were determined on a UR-10 spectrometer. The PMR spectra were recorded on Varian T-60 and Tesla BS-467A spectrometer, solvent CHCl/sub 3/ or CDCl/sub 3/, internal standard TMS.

  6. The Nature of Excess Intercalation of a Quaternary Ammonium Compound in Smectite Clay

    NASA Astrophysics Data System (ADS)

    Lafer, D. A.; Giese, R.

    2010-12-01

    Particular clay minerals, such as the French green clay used by Brunet de Courssou in the treatment of Mycobacterium ulcerans, have intrinsic antibacterial properties that surpass those of most conventional antibiotic treatments. The antimicrobial properties of the French green clay, comprised of 24% Fe-illite and 50% Fe-smectite, have been reproduced by a synthetically generated organically modified smectite (organoclay). The quaternary ammonium compound hexadecyl-trimethyl ammonium bromide (HDTMA) must undergo a cation exchange process in excess of the calculated cation exchange capacity (CEC) to render the clay antimicrobial. This work explores the position of the excess bonding within the clay lattice so as to challenge the hydrophobic bonding hypothesis proposed by Zhao et al (2003) concerning excess intercalation. After determining the CEC of BP smectite, organoclays were produced containing concentrations of one, two, and three times the CEC of HDTMA. Powder X-ray diffraction (PXRD) on a scale of 2 to 20 degrees 2theta was conducted on each of the three organoclays to infer the loading capacity of the smectite by means of the clay’s d-spacing as a proxy for expansion. Liquid Chromatography/Mass Spectrometry (LC-MS) quantitatively determined the surfactant retained on the clay by measuring the residual HDTMA in solution after extracting the organoclay. The d-spacing of the three organoclays implied that the first CEC of HDTMA entered the interlayer as an anion by means of a cation exchange process while the second and third CEC were incorporated into the clay lattice by means of a “hydrophobic bonding” mechanism in which the excess surfactants formed associations with the counterion Br+. Fourier transform infrared (FT-IR) spectra will be collected to determine the specific attachment of the excess bonding within the clay structure.

  7. 2,3,6-/3,4,5-Trimethyl substituted diaryl carotenoid derivatives (Chlorobiaceae) in petroleums of the Belarussian Pripyat River Basin

    USGS Publications Warehouse

    Clifford, D.J.; Clayton, J.L.; Sinninghe, Damste J.S.

    1998-01-01

    Degradation products of the 2,3,6-/3,4,5-trimethyl substituted analog of isorenieratene were characterized in Belarussian petroleums. Devonian oils of low maturity were found to contain high concentrations (e.g., 35 mg/g) of C40 diaryl isoprenoids (2,3,6-/3,4,5-trimethyl substitution) along with an abundance of maturation-related compounds. A maturation scheme for diaryl carotenoid (2,3,6-/3,4,5-trimethyl substitution) precursors was proposed. Diaryl isoprenoids and aryl isoprenoid (2,3,6- and 3,4,5-trimethyl substitutions) contents were found to decrease as a function of maturity. Maturity parameters based on (i) the ratio of two specific C15 aryl isoprenoids and (ii) the ratio of C15 (2,3,6) aryl isoprenoids to C40 diaryl isoprenoids (2,3,6-/3,4,5) were proposed.Degradation products of the 2,3,6-/3,4,5-trimethyl substituted analog of isorenieratene were characterized in Belarussian petroleums. Devonian oils of low maturity were found to contain high concentrations (e.g., 35 mg/g) of C40 diaryl isoprenoids (2,3,6-/3,4,5-trimethyl substitution) along with an abundance of maturation-related compounds. A maturation scheme for diaryl carotenoid (2,3,6-/3,4,5-trimethyl substitution) precursors was proposed. Diaryl isoprenoids and aryl isoprenoid (2,3,6- and 3,4,5-trimethyl substitutions) contents were found to decrease as a function of maturity. Maturity parameters based on (i) the ratio of two specific C15 aryl isoprenoids and (ii) the ratio of C15 (2,3,6) aryl isoprenoids to C40 diaryl isoprenoids (2,3,6-/3,4,5) were proposed.

  8. DFT calculations of triethyl and trimethyl orthoacetate elimination kinetics in the gas phase.

    PubMed

    Márquez, Edgar; Mora, José R; Cordova, Tania; Chuchani, Gabriel

    2009-03-19

    The reaction paths for the gas-phase molecular elimination of triethyl and trimethyl orthoesters were examined at B3LYP/6-31G(d,p), B3LYP/6-31G++(d,p), B3PW91/6-31G(d,p), B3PW91++G(d,p), MPW1PW91/6-31G(d,p), and MPW1PW91/6-31++G(d,p) levels of theory. The thermal decomposition of ethyl and methyl orthoesters involves similar transition state configurations in a four-membered ring arrangement. Products formed are ethanol and the corresponding unsaturated ketal for ethyl orthoesters, while in methyl orthoesters are methanol and the corresponding unsaturated ketal. Calculated thermodynamic and kinetic parameters from B3LYP calculations were found to be in good agreement with the experimental values. The calculated data imply the polarization of the C3-O4, in the direction C3(delta+)...O4(delta-), is rate determining. The NBO charges, bond indexes, and synchronicity parameters suggest the elimination reactions of ethyl orthoesters occur through a more polar asynchronic mechanism compared to methyl orthoesters. PMID:19222178

  9. ESET/SETDB1 gene expression and histone H3 (K9) trimethylation in Huntington's disease

    PubMed Central

    Ryu, Hoon; Lee, Junghee; Hagerty, Sean W.; Soh, Byoung Yul; McAlpin, Sara E.; Cormier, Kerry A.; Smith, Karen M.; Ferrante, Robert J.

    2006-01-01

    Chromatin remodeling and transcription regulation are tightly controlled under physiological conditions. It has been suggested that altered chromatin modulation and transcription dysfunction may play a role in the pathogenesis of Huntington's disease (HD). Increased histone methylation, a well established mechanism of gene silencing, results in transcriptional repression. ERG-associated protein with SET domain (ESET), a histone H3 (K9) methyltransferase, mediates histone methylation. We show that ESET expression is markedly increased in HD patients and in transgenic R6/2 HD mice. Similarly, the protein level of trimethylated histone H3 (K9) was also elevated in HD patients and in R6/2 mice. We further demonstrate that both specificity protein 1 (Sp1) and specificity protein 3 (Sp3) act as transcriptional activators of the ESET promoter in neurons and that mithramycin, a clinically approved guanosine–cytosine-rich DNA binding antitumor antibiotic, interferes with the DNA binding of these Sp family transcription factors, suppressing basal ESET promoter activity in a dose dependent manner. The combined pharmacological treatment with mithramycin and cystamine down-regulates ESET gene expression and reduces hypertrimethylation of histone H3 (K9). This polytherapy significantly ameliorated the behavioral and neuropathological phenotype in the R6/2 mice and extended survival over 40%, well beyond any existing reported treatment in HD mice. Our data suggest that modulation of gene silencing mechanisms, through regulation of the ESET gene is important to neuronal survival and, as such, may be a promising treatment in HD patients. PMID:17142323

  10. Cancer-predisposition gene KLLN maintains pericentric H3K9 trimethylation protecting genomic stability

    PubMed Central

    Nizialek, Emily A.; Sankunny, Madhav; Niazi, Farshad; Eng, Charis

    2016-01-01

    Maintenance of proper chromatin states and genomic stability is vital for normal development and health across a range of organisms. Here, we report on the role of KLLN in maintenance of pericentric H3K9 trimethylation (H3K9me3) and genomic stability. Germline hypermethylation of KLLN, a gene uncovered well after the human genome project, has been linked to Cowden cancer-predisposition syndrome (CS) in PTEN wild-type cases. KLLN first identified as a p53-dependent tumor suppressor gene, was believed to bind randomly to DNA and cause S-phase arrest. Using chromatin immunoprecipitation-based sequencing (ChIP-seq), we demonstrated that KLLN binds to DNA regions enriched with H3K9me3. KLLN overexpression correlated with increased H3K9 methyltransferase activity and increased global H3K9me3, while knockdown of KLLN had an opposite effect. We also found KLLN to localize to pericentric regions, with loss of KLLN resulting in dysregulation of pericentric heterochromatin, with consequent chromosomal instability manifested by increased micronuclei formation and numerical chromosomal aberrations. Interestingly, we show that KLLN interacts with DBC1, with consequent abrogation of DBC1 inhibition of SUV39H1, a H3K9 methyltransferase, suggesting the mode of KLLN regulating H3K9me3. These results suggest a critical role for KLLN as a potential regulator of pericentric heterochromatin formation, genomic stability and gene expression. PMID:26673699

  11. Histone H3K4 trimethylation: dynamic interplay with pre-mRNA splicing.

    PubMed

    Davie, James R; Xu, Wayne; Delcuve, Genevieve P

    2016-02-01

    Histone H3 lysine 4 trimethylation (H3K4me3) is often stated as a mark of transcriptionally active promoters. However, closer study of the positioning of H3K4me3 shows the mark locating primarily after the first exon at the 5' splice site and overlapping with a CpG island in mammalian cells. There are several enzyme complexes that are involved in the placement of the H3K4me3 mark, including multiple protein complexes containing SETD1A, SETD1B, and MLL1 enzymes (writers). CXXC1, which is associated with SETD1A and SETD1B, target these enzymes to unmethylated CpG islands. Lysine demethylases (KDM5 family members, erasers) demethylate H3K4me3. The H3K4me3 mark is recognized by several proteins (readers), including lysine acetyltransferase complexes, chromatin remodelers, and RNA bound proteins involved in pre-mRNA splicing. Interestingly, attenuation of H3K4me3 impacts pre-mRNA splicing, and inhibition of pre-mRNA splicing attenuates H3K4me3. PMID:26352678

  12. ARTD1 Suppresses Interleukin 6 Expression by Repressing MLL1-Dependent Histone H3 Trimethylation.

    PubMed

    Minotti, Roberta; Andersson, Anneli; Hottiger, Michael O

    2015-09-01

    ADP-ribosyltransferase diphtheria-toxin like 1/poly(ADP-ribose) polymerase 1 (ARTD1/PARP1) is a chromatin-associated protein in the nucleus and plays an important role in different cellular processes such as regulation of gene transcription. ARTD1 has been shown to coregulate the inflammatory response by modulating the activity of the transcription factor nuclear factor κB (NF-κB), the principal regulator of interleukin 6 (IL-6), an important inflammatory cytokine implicated in a variety of diseases such as cancer. However, to what extent and how ARTD1 regulates IL-6 transcription has not been clear. Here, we show that ARTD1 suppresses lipopolysaccharide (LPS)-induced IL-6 expression in macrophages, without affecting the recruitment of the NF-κB subunit RelA to the IL-6 promoter and independent of its enzymatic activity. Interestingly, knockdown of ARTD1 did not alter H3 occupancy but increased LPS-induced trimethylation of histone 3 at lysine 4 (H3K4me3), a hallmark of transcriptionally active genes. We found that ARTD1 mediates its effect through the methyltransferase MLL1, by catalyzing H3K4me3 at the IL-6 promoter and forming a complex with NF-κB. These results demonstrate that ARTD1 modulates IL-6 expression by regulating the function of an NF-κB enhanceosome complex, which involves MLL1 and does not require ADP-ribosylation. PMID:26149390

  13. Small is beautiful: N-trimethyl chitosan-ovalbumin conjugates for microneedle-based transcutaneous immunisation.

    PubMed

    Bal, Suzanne M; Slütter, Bram; Jiskoot, Wim; Bouwstra, Joke A

    2011-05-23

    To provoke an immune response, a transcutaneously administered vaccine has to diffuse into the skin, reach the lymph nodes and be taken up by dendritic cells (DCs). To study these three steps we immunised mice transcutaneously (with microneedles), intradermally and intranodally. The effect of the formulation was investigated by formulating ovalbumin (OVA) in three ways with N-trimethyl chitosan (TMC): TMC+OVA mixtures, TMC-OVA conjugates and TMC/OVA nanoparticles. Both the percentage OVA(+) DCs in the lymph node and the resultant immunogenicity (serum IgG titres) were studied. Transcutaneously, the TMC-OVA conjugates induced the highest IgG levels and resulted in more OVA(+) DCs in the lymph nodes after 24h than the other TMC formulations. Intradermally, all TMC-adjuvanted OVA formulations increased IgG titres compared to plain OVA. These formulations formed a depot in the skin, prolonging OVA delivery to the lymph nodes. The prolonged delivery of TMC-adjuvanted OVA to lymph node resident DCs was also observed after intranodal immunisation, but in this case the higher uptake did not correspond with elevated antibody titres compared to plain OVA. In conclusion, after transcutaneous administration, TMC-OVA conjugates are most immunogenic among the tested formulations, likely because they penetrate the skin more easily than nanoparticles and consequently are better delivered to DCs, while they show higher uptake by DCs than TMC+OVA mixtures. PMID:21443959

  14. Transcriptome and H3K27 tri-methylation profiling of Ezh2-deficient lung epithelium.

    PubMed

    Holik, Aliaksei Z; Galvis, Laura A; Lun, Aaron T L; Ritchie, Matthew E; Asselin-Labat, Marie-Liesse

    2015-09-01

    The adaptation of the lungs to air breathing at birth requires the fine orchestration of different processes to control lung morphogenesis and progenitor cell differentiation. However, there is little understanding of the role that epigenetic modifiers play in the control of lung development. We found that the histone methyl transferase Ezh2 plays a critical role in lung lineage specification and survival at birth. We performed a genome-wide transcriptome study combined with a genome-wide analysis of the distribution of H3K27 tri-methylation marks to interrogate the role of Ezh2 in lung epithelial cells. Lung cells isolated from Ezh2-deficient and control mice at embryonic day E16.5 were sorted into epithelial and mesenchymal populations based on EpCAM expression. This enabled us to dissect the transcriptional and epigenetic changes induced by the loss of Ezh2 specifically in the lung epithelium. Here we provide a detailed description of the analysis of the RNA-seq and ChIP-seq data, including quality control, read mapping, differential expression and differential binding analyses, as well as visualisation methods used to present the data. These data can be accessed from the Gene Expression Omnibus database (super-series accession number GSE57393). PMID:26484284

  15. Transcriptome and H3K27 tri-methylation profiling of Ezh2-deficient lung epithelium

    PubMed Central

    Holik, Aliaksei Z.; Galvis, Laura A.; Lun, Aaron T.L.; Ritchie, Matthew E.; Asselin-Labat, Marie-Liesse

    2015-01-01

    The adaptation of the lungs to air breathing at birth requires the fine orchestration of different processes to control lung morphogenesis and progenitor cell differentiation. However, there is little understanding of the role that epigenetic modifiers play in the control of lung development. We found that the histone methyl transferase Ezh2 plays a critical role in lung lineage specification and survival at birth. We performed a genome-wide transcriptome study combined with a genome-wide analysis of the distribution of H3K27 tri-methylation marks to interrogate the role of Ezh2 in lung epithelial cells. Lung cells isolated from Ezh2-deficient and control mice at embryonic day E16.5 were sorted into epithelial and mesenchymal populations based on EpCAM expression. This enabled us to dissect the transcriptional and epigenetic changes induced by the loss of Ezh2 specifically in the lung epithelium. Here we provide a detailed description of the analysis of the RNA-seq and ChIP-seq data, including quality control, read mapping, differential expression and differential binding analyses, as well as visualisation methods used to present the data. These data can be accessed from the Gene Expression Omnibus database (super-series accession number GSE57393). PMID:26484284

  16. Folate mediated in vitro targeting of depolymerised trimethylated chitosan having arginine functionality.

    PubMed

    Morris, Viola B; Sharma, Chandra P

    2010-08-15

    Delivery vectors having targeting ligands provide an impending impact on cancer gene therapy. Our work focuses on folate mediated targeting induced by conjugating poly(ethylene glycol)-folate (PEG-FA) with arginine modified chitosan polymer having low molecular weight of 15 kDa and high degree of quaternization (ATFP15H). The ATFP15H derivative on condensation with plasmid DNA formed nanoparticles with core shell nanostructure. It also affirmed good buffering capacity. The derivative was found to protect DNA from DNase I degradation and also from disassembly in presence of negatively charged plasma proteins. It exhibited blood compatibility in terms of percentage hemolysis, erythrocyte aggregation and also by platelet activation. At a concentration of 10 microg, the capability of the derivative to enhance cell growth at normal cell growing conditions was observed. The transfection efficiency was also found to be comparable to PEI when transfected in KB cell line, which over expressed the folate receptor (FR) in presence of 10% fetal bovine serum (FBS). On comparison with native chitosan and trimethylated chitosan, ATFP15H derivative exhibited high cellular uptake and nuclear localization due to the superior colloidal stability attained on conjugation with polyethylene glycol. This has been ascertained by flow cytometry and YOYO labeling of plasmid DNA. PMID:20580766

  17. New trimethyl chitosan-based composite nanoparticles as promising antibacterial agents.

    PubMed

    El-Sherbiny, Ibrahim; Salih, Ehab; Reicha, Fikry

    2016-01-01

    In the present study, densely dispersed silver nanoparticles (Ag NPs) were rapidly green synthesized in the presence of Rumex dentatus aqueous extract, followed by UV-irradiation reduction. The Ag NPs were characterized using UV-vis spectroscopy, FTIR, XRD, and TEM. Then, the Ag NPs were incorporated into interpenetrating polymeric networks based on cationic trimethyl chitosan (TMCS) and anionic poly(acrylamide-co-sodium acrylate) copolymer to develop a new series of composite nanoparticles as potential antibacterial agents. Both TMCS and poly(acrylamide-co-sodium acrylate) were prepared in the study, and characterized using FTIR, DSC, and SEM. The synthesized Ag NPs showed high purity and uniform particle size distribution with particle size ranged between 5 and 30 nm. The composite nanoparticles demonstrated homogeneous spherical shape with size in the range of 378-402 nm. Both Ag NPs and the composite nanoparticles showed promising bactericidal activity as compared with the control. Moreover, the antibacterial activity of the composite nanoparticles increased along with increasing the concentrations of Ag NPs and the TMCS. PMID:26289003

  18. Cyclodextrin based ternary system of modafinil: Effect of trimethyl chitosan and polyvinylpyrrolidone as complexing agents.

    PubMed

    Patel, Parth; Agrawal, Y K; Sarvaiya, Jayrajsinh

    2016-03-01

    Modafinil is an approved drug for the treatment of narcolepsy and have a strong market presence in many countries. The drug is widely consumed for off-label uses and currently listed as a restricted drug. Modafinil has very low water solubility. To enhance the aqueous solubility of modafinil by the formation of a ternary complex with Hydroxypropyl-β-cyclodextrin and two hydrophilic polymers was the main objective of the present study. Pyrrolidone (PVP K30) and a water soluble chitosan derivative, trimethyl chitosan (TMC) were studied by solution state and solid state characterization methods for their discriminatory efficiency in solubility enhancement of modafinil. Phase solubility study depicted the highest complexation efficiency (2.22) of cyclodextrin derivative in the presence of TMC compared to the same in the presence of PVP K30 (0.08) and in the absence of any polymer (0.92). FT-IR analysis of binary and ternary complex expressed comparable contribution of both polymers in formation of inclusion complex. The thermal behaviour of binary and ternary complex, involving individual polymers disclosed the influence of TMC on polymorphism of the drug. DSC study revealed efficiency of TMC to prevent conversion of metastable polymorphic form to stable polymorphic form. Ternary complex, involving TMC enhanced water solubility of the drug 1.5 times more compared to the binary complex of the drug whereas PVP K30 reduced the Solubility. PMID:26697780

  19. Modification of Hematite Electronic Properties with Trimethyl Aluminum to Enhance the Efficiency of Photoelectrodes.

    PubMed

    Tallarida, Massimo; Das, Chittaranjan; Cibrev, Dejan; Kukli, Kaupo; Tamm, Aile; Ritala, Mikko; Lana-Villarreal, Teresa; Gómez, Roberto; Leskelä, Markku; Schmeisser, Dieter

    2014-10-16

    The electronic properties of hematite were investigated by means of synchrotron radiation photoemission (SR-PES) and X-ray absorption spectroscopy (XAS). Hematite samples were exposed to trimethyl aluminum (TMA) pulses, a widely used Al-precursor for the atomic layer deposition (ALD) of Al2O3. SR-PES and XAS showed that the electronic properties of hematite were modified by the interaction with TMA. In particular, the hybridization of O 2p states with Fe 3d and Fe 4s4p changed upon TMA pulses due to electron inclusion as polarons. The change of hybridization correlates with an enhancement of the photocurrent density due to water oxidation for the hematite electrodes. Such an enhancement has been associated with an improvement in charge carrier transport. Our findings open new perspectives for the understanding and utilization of electrode modifications by very thin ALD films and show that the interactions between metal precursors and substrates seem to be important factors in defining their electronic and photoelectrocatalytic properties. PMID:26278613

  20. Chorion formation in panoistic ovaries requires windei and trimethylation of histone 3 lysine 9.

    PubMed

    Herraiz, Alba; Belles, Xavier; Piulachs, Maria-Dolors

    2014-01-01

    Epigenetic modifications play key roles in transcriptional regulation. Trimethylation of histone 3 lysine 9 (H3K9me3) is one of the most widely studied histone post-translational modifications, and has been linked to transcriptional repression. In Drosophila melanogaster, Windei is needed for H3K9me3 in female germ line cells. Here, we report the occurrence of a D. melanogaster Windei (Wde) ortholog in the ovary of the hemimetabolous insect Blattella germanica, which we named BgWde. Depletion of BgWde by RNAi reduced H3K9me3 in follicular cells, which triggered changes in transcriptional regulation that led to the prevention of chorion gene expression. In turn, this impaired oviposition (and the formation of the ootheca) and, therefore, prevented reproduction. Windei and H3K9me3 have already been reported in follicular cells of D. melanogaster, but this is the first time that the function of these modifications has been demonstrated in the said cells. This is also the first time that an epigenetic marker is reported as having a key role in choriogenesis. PMID:23872316

  1. Cancer-predisposition gene KLLN maintains pericentric H3K9 trimethylation protecting genomic stability.

    PubMed

    Nizialek, Emily A; Sankunny, Madhav; Niazi, Farshad; Eng, Charis

    2016-05-01

    Maintenance of proper chromatin states and genomic stability is vital for normal development and health across a range of organisms. Here, we report on the role of KLLN in maintenance of pericentric H3K9 trimethylation (H3K9me3) and genomic stability. Germline hypermethylation of KLLN, a gene uncovered well after the human genome project, has been linked to Cowden cancer-predisposition syndrome (CS) in PTEN wild-type cases. KLLN first identified as a p53-dependent tumor suppressor gene, was believed to bind randomly to DNA and cause S-phase arrest. Using chromatin immunoprecipitation-based sequencing (ChIP-seq), we demonstrated that KLLN binds to DNA regions enriched with H3K9me3. KLLN overexpression correlated with increased H3K9 methyltransferase activity and increased global H3K9me3, while knockdown of KLLN had an opposite effect. We also found KLLN to localize to pericentric regions, with loss of KLLN resulting in dysregulation of pericentric heterochromatin, with consequent chromosomal instability manifested by increased micronuclei formation and numerical chromosomal aberrations. Interestingly, we show that KLLN interacts with DBC1, with consequent abrogation of DBC1 inhibition of SUV39H1, a H3K9 methyltransferase, suggesting the mode of KLLN regulating H3K9me3. These results suggest a critical role for KLLN as a potential regulator of pericentric heterochromatin formation, genomic stability and gene expression. PMID:26673699

  2. An oncogenic Ezh2 mutation induces tumors through global redistribution of histone 3 lysine 27 trimethylation.

    PubMed

    Souroullas, George P; Jeck, William R; Parker, Joel S; Simon, Jeremy M; Liu, Jie-Yu; Paulk, Joshiawa; Xiong, Jessie; Clark, Kelly S; Fedoriw, Yuri; Qi, Jun; Burd, Christin E; Bradner, James E; Sharpless, Norman E

    2016-06-01

    B cell lymphoma and melanoma harbor recurrent mutations in the gene encoding the EZH2 histone methyltransferase (EZH2), but the carcinogenic role of these mutations is unclear. Here we describe a mouse model in which the most common somatic Ezh2 gain-of-function mutation (EZH2(Y646F) in human; Ezh2(Y641F) in mouse) is conditionally expressed. Expression of Ezh2(Y641F) in mouse B cells or melanocytes caused high-penetrance lymphoma or melanoma, respectively. Overexpression of the anti-apoptotic protein Bcl2, but not the oncoprotein Myc, or loss of the tumor suppressor protein p53 (encoded by Trp53 in mice) further accelerated lymphoma progression. Expression of the mutant Braf but not the mutant Nras oncoprotein further accelerated melanoma progression. Although expression of Ezh2(Y641F) globally increased the abundance of trimethylated Lys27 of histone H3 (H3K27me3), it also caused a widespread redistribution of this repressive mark, including a loss of H3K27me3 that was associated with increased transcription at many loci. These results suggest that Ezh2(Y641F) induces lymphoma and melanoma through a vast reorganization of chromatin structure, inducing both repression and activation of polycomb-regulated loci. PMID:27135738

  3. Surface Chemistry of Trimethyl Phosphate on α-Fe2O3

    SciTech Connect

    Henderson, Michael A.

    2011-12-01

    The chemistry of trimethyl phosphate (TMP) was examined on the (012) crystallographic face of hematite (α-Fe2O3) using temperature programmed desorption (TPD), high resolution electron energy loss spectroscopy (HREELS), static secondary ion mass spectrometry (SSIMS) and Auger electron spectroscopy (AES). TMP binds to Fe3+ sites on the clean α-Fe2O3(012) surface through lone pairs on the P=O oxygen atom. A small portion of adsorbed TMP desorbs without decomposition, however, the majority of adsorbed TMP decomposes in a two step process on the clean surface. The first step, occurring at or below room temperature (RT), likely involves displacement or substitution of one –OCH3 group to form surface methoxy groups and adsorbed dimethyl phosphate (DMP). In the second step, DMP decomposes above 500 K to a 1:1 ratio of gaseous methanol and formaldehyde with phosphate left on the surface. Identification of these steps was confirmed using the chemistry of methanol on the clean surface. Coadsorption of TMP and water led to a small degree of hydrolysis between these two molecules in the multilayer, but no significant change in the chemistry on the surface. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

  4. PMMA-N,N,N-trimethyl chitosan nanoparticles for fabrication of antibacterial natural rubber latex gloves.

    PubMed

    Arpornwichanop, Thanida; Polpanich, Duangporn; Thiramanas, Raweewan; Suteewong, Teeraporn; Tangboriboonrat, Pramuan

    2014-08-30

    This paper presents one-pot synthesis of N,N,N-trimethyl chitosan (TMC) stabilized poly(methyl methacrylate) (PMMA) latex particles via the miniemulsion polymerization technique. From (1)H NMR, synthesized TMC contains 52% degree of quaternization. Compared to native biopolymer chitosan, TMC possesses permanently positive charges as well as provides greater antibacterial activity. Combining properties of PMMA and TMC, PMMA-TMC latex nanoparticles (hydrodynamic size ≈282 nm) could be used in place of inorganic lubricating powder in fabrication of latex gloves at pH ≥ 7. After immersing sulphur prevulcanized natural rubber (SPNR) film into 3 wt% of PMMA-TMC latex at pH 7, significant amount of nanoparticles uniformly deposited onto SPNR film was observed under SEM. A number of nanoparticles present on film surface would increase surface roughness of the rubber film and potentially inhibit the bacterial (Escherichia coli and Staphylococcus aureus) growth, which would be useful for fabrication of special gloves with antibacterial property. PMID:24815393

  5. Calcium sulphate in ammonium sulphate solution

    USGS Publications Warehouse

    Sullivan, E.C.

    1905-01-01

    Calcium sulphate, at 25?? C., is two-thirds as soluble in dilute (o.i mol per liter) and twice as soluble in concentrated (3 mois per liter) ammonium sulphate solution as in water. The specific electric conductivity of concentrated ammonium sulphate solutions is lessened by saturating with calcium sulphate. Assuming that dissociation of ammonium sulphate takes place into 2NH4?? and SO4" and of calcium sulphate into Ca and SO4" only, and that the conductivity is a measure of such dissociation, the solubility of calcium sulphate in dilute ammonium sulphate solutions is greater than required by the mass-law. The conductivity of the dilute mixtures may be accurately calculated by means of Arrhenius' principle of isohydric solutions. In the data obtained in these calculations, the concentration of non-dissociated calcium sulphate decreases with increasing ammonium sulphate. The work as a whole is additional evidence of the fact that we are not yet in possession of all the factors necessary for reconciling the mass-law to the behavior of electrolytes. The measurements above described were made in the chemical laboratory of the University of Michigan.

  6. Benchmark binding energies of ammonium and alkyl-ammonium ions interacting with water. Are ammonium-water hydrogen bonds strong?

    NASA Astrophysics Data System (ADS)

    Vallet, Valérie; Masella, Michel

    2015-01-01

    Alkyl-ammonium ion/water interactions are investigated using high level quantum computations, yielding thermodynamics data in good agreement with gas-phase experiments. Alkylation and hydration lead to weaken the NHsbnd O hydrogen bonds. Upon complete hydration by four water molecules, their main features are close to those of the OHsbnd O bond in the isolated water dimer. Energy decomposition analyses indicate that hydration of alkyl-ammonium ions are mainly due to electrostatic/polarization effects, as for hard monoatomic cations, but with a larger effect of dispersion.

  7. On the evaporation of ammonium sulfate solution

    PubMed Central

    Drisdell, Walter S.; Saykally, Richard J.; Cohen, Ronald C.

    2009-01-01

    Aqueous evaporation and condensation kinetics are poorly understood, and uncertainties in their rates affect predictions of cloud behavior and therefore climate. We measured the cooling rate of 3 M ammonium sulfate droplets undergoing free evaporation via Raman thermometry. Analysis of the measurements yields a value of 0.58 ± 0.05 for the evaporation coefficient, identical to that previously determined for pure water. These results imply that subsaturated aqueous ammonium sulfate, which is the most abundant inorganic component of atmospheric aerosol, does not affect the vapor–liquid exchange mechanism for cloud droplets, despite reducing the saturation vapor pressure of water significantly. PMID:19861551

  8. On the effective ionic radii for ammonium.

    PubMed

    Sidey, Vasyl

    2016-08-01

    A set of effective ionic radii corresponding to different coordination numbers (CNs) and compatible with the radii system by Shannon [Acta Cryst. (1976), A32, 751-767] has been derived for ammonium: 1.40 Å (CN = IV), 1.48 Å (CN = VI), 1.54 Å (CN = VIII) and 1.67 Å (CN = XII). The bond-valence parameters r0 = 2.3433 Å and B = 0.262 Å have been determined for ammonium-fluorine bonds. PMID:27484382

  9. On the evaporation of ammonium sulfate solution

    SciTech Connect

    Drisdell, Walter S.; Saykally, Richard J.; Cohen, Ronald C.

    2009-07-16

    Aqueous evaporation and condensation kinetics are poorly understood, and uncertainties in their rates affect predictions of cloud behavior and therefore climate. We measured the cooling rate of 3 M ammonium sulfate droplets undergoing free evaporation via Raman thermometry. Analysis of the measurements yields a value of 0.58 {+-} 0.05 for the evaporation coefficient, identical to that previously determined for pure water. These results imply that subsaturated aqueous ammonium sulfate, which is the most abundant inorganic component of atmospheric aerosol, does not affect the vapor-liquid exchange mechanism for cloud droplets, despite reducing the saturation vapor pressure of water significantly.

  10. Synthesis, characterization and cytotoxicity of poly(ethylene glycol)-graft-trimethyl chitosan block copolymers.

    PubMed

    Mao, Shirui; Shuai, Xintao; Unger, Florian; Wittmar, Matthias; Xie, Xiulan; Kissel, Thomas

    2005-11-01

    PEGylated trimethyl chitosan (TMC) copolymers were synthesized in an attempt to both increase the solubility of chitosan in water, and improve the biocompatibility of TMC. A series of copolymers with different degrees of substitution were obtained by grafting activated poly(ethylene glycol)s (PEG) of different MW onto TMC via primary amino groups. Structure of the copolymers was characterized using 1H, 13C NMR spectroscopy and GPC. Solubility experiments demonstrated that PEG-g-TMC copolymers were completely water-soluble over the entire pH range of 1-14 regardless of the PEG MW, even when the graft density was as low as 10%. Using the methyl tetrazolium (MTT) assay, the effect of TMC molecular weight, PEGylation ratio, PEG and TMC molecular weight in the copolymers, and complexation with insulin on the cytotoxicity of TMC was examined, and IC50 values were calculated with L929 cell line. All polymers exhibited a time- and dose-dependent cytotoxic response that increased with molecular weight. PEGylation can decrease the cytotoxicity of TMC to a great extent in the case of low molecular weight TMCs. According to the cytotoxicity results, PEG 5 kDa is superior for PEGylation when compared to PEG 550 Da at similar graft ratios. Complexation with insulin further increased cell viability. In addition, Lactate dehydrogenase (LDH) assays were performed to quantify the membrane-damaging effects of the copolymers, which is in line with the conclusion drawn from MTT assay. Moreover, the safety of the copolymers was corroborated by observing the morphological change of the cells with inverted phase contrast microscopy. Based upon these results PEG-g-TMC merits further investigations as a drug delivery vehicle. PMID:15913769

  11. Histone H3K36 trimethylation is essential for multiple silencing mechanisms in fission yeast.

    PubMed

    Suzuki, Shota; Kato, Hiroaki; Suzuki, Yutaka; Chikashige, Yuji; Hiraoka, Yasushi; Kimura, Hiroshi; Nagao, Koji; Obuse, Chikashi; Takahata, Shinya; Murakami, Yota

    2016-05-19

    In budding yeast, Set2 catalyzes di- and trimethylation of H3K36 (H3K36me2 and H3K36me3) via an interaction between its Set2-Rpb1 interaction (SRI) domain and C-terminal repeats of RNA polymerase II (Pol2) phosphorylated at Ser2 and Ser5 (CTD-S2,5-P). H3K36me2 is sufficient for recruitment of the Rpd3S histone deacetylase complex to repress cryptic transcription from transcribed regions. In fission yeast, Set2 is also responsible for H3K36 methylation, which represses a subset of RNAs including heterochromatic and subtelomeric RNAs, at least in part via recruitment of Clr6 complex II, a homolog of Rpd3S. Here, we show that CTD-S2P-dependent interaction of fission yeast Set2 with Pol2 via the SRI domain is required for formation of H3K36me3, but not H3K36me2. H3K36me3 silenced heterochromatic and subtelomeric transcripts mainly through post-transcriptional and transcriptional mechanisms, respectively, whereas H3K36me2 was not enough for silencing. Clr6 complex II appeared not to be responsible for heterochromatic silencing by H3K36me3. Our results demonstrate that H3K36 methylation has multiple outputs in fission yeast; these findings provide insights into the distinct roles of H3K36 methylation in metazoans, which have different enzymes for synthesis of H3K36me1/2 and H3K36me3. PMID:26792892

  12. Polycomb gene expression and histone H3 lysine 27 trimethylation changes during bovine preimplantation development.

    PubMed

    Ross, Pablo J; Ragina, Neli P; Rodriguez, Ramon M; Iager, Amy E; Siripattarapravat, Kannika; Lopez-Corrales, Nestor; Cibelli, Jose B

    2008-12-01

    Trimethylation of histone H3 at lysine 27 (H3K27me3) is established by polycomb group genes and is associated with stable and heritable gene silencing. The aim of this study was to characterize the expression of polycomb genes and the dynamics of H3K27me3 during bovine oocyte maturation and preimplantation development. Oocytes and in vitro-produced embryos were collected at different stages of development. Polycomb gene expression was analyzed by real-time quantitative RT-PCR and immunofluorescence. Global H3K27me3 levels were determined by semiquantitative immunofluorescence. Transcripts for EZH2, EED, and SUZ12 were detected at all stages analyzed, with EZH2 levels being the highest of the three at early stages of development. By the time the embryo reached the blastocyst stage, the level of PcG gene mRNA levels significantly increased. Immunofluorescence staining indicated nuclear expression of EZH2 at all stages while nuclear localized EED and SUZ12 were only evident at the morula and blastocyst stages. Semiquantitative analysis of H3K27me3 levels showed that nuclear fluorescence intensity was the highest in immature oocytes, which steadily decreased after fertilization to reach a nadir at the eight-cell stage, and then increased at the blastocyst stage. These results suggest that the absence of polycomb repressive complex 2 proteins localized to the nucleus of early embryos could be responsible for the gradual decrease in H3K27me3 during early preimplantation development. PMID:18784248

  13. N-trimethyl chitosan chloride-coated PLGA nanoparticles overcoming multiple barriers to oral insulin absorption.

    PubMed

    Sheng, Jianyong; Han, Limei; Qin, Jing; Ru, Ge; Li, Ruixiang; Wu, Lihong; Cui, Dongqi; Yang, Pei; He, Yuwei; Wang, Jianxin

    2015-07-22

    Although several strategies have been applied for oral insulin delivery to improve insulin bioavailability, little success has been achieved. To overcome multiple barriers to oral insulin absorption simultaneously, insulin-loaded N-trimethyl chitosan chloride (TMC)-coated polylactide-co-glycoside (PLGA) nanoparticles (Ins TMC-PLGA NPs) were formulated in our study. The Ins TMC-PLGA NPs were prepared using the double-emulsion solvent evaporation method and were characterized to determine their size (247.6 ± 7.2 nm), ζ-potential (45.2 ± 4.6 mV), insulin-loading capacity (7.8 ± 0.5%) and encapsulation efficiency (47.0 ± 2.9%). The stability and insulin release of the nanoparticles in enzyme-containing simulated gastrointestinal fluids suggested that the TMC-PLGA NPs could partially protect insulin from enzymatic degradation. Compared with unmodified PLGA NPs, the positively charged TMC-PLGA NPs could improve the mucus penetration of insulin in mucus-secreting HT29-MTX cells, the cellular uptake of insulin via clathrin- or adsorption-mediated endocytosis in Caco-2 cells and the permeation of insulin across a Caco-2 cell monolayer through tight junction opening. After oral administration in mice, the TMC-PLGA NPs moved more slowly through the gastrointestinal tract compared with unmodified PLGA NPs, indicating the mucoadhesive property of the nanoparticles after TMC coating. Additionally, in pharmacological studies in diabetic rats, orally administered Ins TMC-PLGA NPs produced a stronger hypoglycemic effect, with 2-fold higher relative pharmacological availability compared with unmodified NPs. In conclusion, oral insulin absorption is improved by TMC-PLGA NPs with the multiple absorption barriers overcome simultaneously. TMC-PLGA NPs may be a promising drug delivery system for oral administration of macromolecular therapeutics. PMID:26111015

  14. Polarizable Multipole-Based Force Field for Dimethyl and Trimethyl Phosphate.

    PubMed

    Zhang, Changsheng; Lu, Chao; Wang, Qiantao; Ponder, Jay W; Ren, Pengyu

    2015-11-10

    Phosphate groups are commonly observed in biomolecules such as nucleic acids and lipids. Due to their highly charged and polarizable nature, modeling these compounds with classical force fields is challenging. Using quantum mechanical studies and liquid-phase simulations, the AMOEBA force field for dimethyl phosphate (DMP) ion and trimethyl phosphate (TMP) has been developed. On the basis of ab initio calculations, it was found that ion binding and the solution environment significantly impact both the molecular geometry and the energy differences between conformations. Atomic multipole moments are derived from MP2/cc-pVQZ calculations of methyl phosphates at several conformations with their chemical environments taken into account. Many-body polarization is handled via a Thole-style induction model using distributed atomic polarizabilities. van der Waals parameters of phosphate and oxygen atoms are determined by fitting to the quantum mechanical interaction energy curves for water with DMP or TMP. Additional stretch-torsion and angle-torsion coupling terms were introduced in order to capture asymmetry in P-O bond lengths and angles due to the generalized anomeric effect. The resulting force field for DMP and TMP is able to accurately describe both the molecular structure and conformational energy surface, including bond and angle variations with conformation, as well as interaction of both species with water and metal ions. The force field was further validated for TMP in the condensed phase by computing hydration free energy, liquid density, and heat of vaporization. The polarization behavior between liquid TMP and TMP in water is drastically different. PMID:26574325

  15. Deposition of a-C/B films from o-carborane and trimethyl boron precursors

    SciTech Connect

    Geddes, J.B.; Getty, W.D.

    1996-12-31

    Vacuum wall deposition of a-B/C films has had tremendous positive impact on the performance of tokamak fusion reactors. In this work, precursor vapor and helium carrier gas have been used to create a plasma using a novel plasma source. Either trimethyl boron (TMB) or sublimed vapor from o-carborane solid can be used as deposition precursors. The plasma operates in a pressure range of 5 to 15 mTorr and typical flow rates are 5 sccm He plus 0.5-1 sccm o-carborane or TMB vapor. The film deposition rate ranges from less than 100 {angstrom}/minute to over 1,000 {angstrom}/minute. Microwave power levels range from 300--400 W at 2.45 GHz. The temperature and bias of the substrate can be varied, and the temperature of the substrate is recorded during deposition. The films have been analyzed using XPS. The atomic composition of the films has been measured. The o-carborane films have a much higher boron concentration than those deposited from TMB. The chemical bond characteristics of the different species have also been examined for each type of film. The thickness of the films is measured by profilometry, and this is combined with measurements of the film area and weight to calculate the film density. X-ray diffraction analysis has been performed; no evidence of any crystalline structure was found. Films with a thickness of a few thousand {angstrom} are routinely obtained. Deposition rates were 350 {angstrom}/minute on average.

  16. 21 CFR 556.375 - Maduramicin ammonium.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Maduramicin ammonium. 556.375 Section 556.375 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS TOLERANCES FOR RESIDUES OF NEW ANIMAL DRUGS IN FOOD Specific Tolerances for Residues of New Animal Drugs §...

  17. 21 CFR 573.170 - Ammonium formate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) The additive is manufactured by the reaction of 99.5 percent ammonia gas and 99 percent formic acid in...) To assure safe use of the additive, in addition to the other information required by the Federal Food... labeled as containing ammonium formate. (d) To assure safe use of the additive, in addition to the...

  18. 21 CFR 573.170 - Ammonium formate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) The additive is manufactured by the reaction of 99.5 percent ammonia gas and 99 percent formic acid in...) To assure safe use of the additive, in addition to the other information required by the Federal Food... labeled as containing ammonium formate. (d) To assure safe use of the additive, in addition to the...

  19. 21 CFR 573.170 - Ammonium formate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... is manufactured by the reaction of 99.5 percent ammonia gas and 99 percent formic acid in a... safe use of the additive, in addition to the other information required by the Federal Food, Drug, and... ammonium formate. (d) To assure safe use of the additive, in addition to the other information required...

  20. 21 CFR 184.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ammonium carbonate. 184.1137 Section 184.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  1. 21 CFR 184.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium sulfate. 184.1143 Section 184.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  2. 21 CFR 184.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium carbonate. 184.1137 Section 184.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  3. Cyclo­hexyl­ammonium nitrate

    PubMed Central

    Bagabas, Abdulaziz A.; Aboud, Mohamed F. A.; Shemsi, Ahsan M.; Addurihem, Emad S.; Al-Othman, Zeid A.; Chidan Kumar, C. S.; Fun, Hoong-Kun

    2014-01-01

    In the title salt, C6H14N+·NO3 −, the cyclo­hexyl ring adopts a chair conformation. The ammonium group occupies an equatorial position and the crystal struture is stabilized by inter­molecular N—H⋯O hydrogen-bonding inter­actions, resulting in a three-dimensional network. PMID:24764971

  4. 76 FR 70366 - Ammonium Nitrate Security Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-14

    ... Department previously announced a series of public meetings on the same topic on October 2, 2011 (see 76 FR... public comment on August 3, 2011. See 73 FR 64280 (advance notice of proposed rulemaking); 76 FR 46908... the Department's Ammonium Nitrate Security Program Web site, at...

  5. 21 CFR 184.1133 - Ammonium alginate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...: Category of food Maximum level of use in food (as served) (percent) Functional use Confections, frostings... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium alginate. 184.1133 Section 184.1133 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  6. 21 CFR 184.1133 - Ammonium alginate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium alginate. 184.1133 Section 184.1133 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  7. 21 CFR 582.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium carbonate. 582.1137 Section 582.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  8. 21 CFR 582.1135 - Ammonium bicarbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium bicarbonate. 582.1135 Section 582.1135 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  9. 21 CFR 582.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ammonium carbonate. 582.1137 Section 582.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  10. 21 CFR 582.1135 - Ammonium bicarbonate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ammonium bicarbonate. 582.1135 Section 582.1135 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  11. 21 CFR 582.1139 - Ammonium hydroxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ammonium hydroxide. 582.1139 Section 582.1139 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  12. 21 CFR 582.1139 - Ammonium hydroxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ammonium hydroxide. 582.1139 Section 582.1139 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  13. 21 CFR 582.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ammonium carbonate. 582.1137 Section 582.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  14. 21 CFR 582.1139 - Ammonium hydroxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium hydroxide. 582.1139 Section 582.1139 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  15. 21 CFR 582.1135 - Ammonium bicarbonate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ammonium bicarbonate. 582.1135 Section 582.1135 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  16. Diamond Head Revisited with Ammonium Dichromate.

    ERIC Educational Resources Information Center

    Arrigoni, Edward

    1981-01-01

    The classroom demonstration using ammonium dichromate to simulate a volcanic eruption can be modified into a more dramatic and accurate representation of the geologic processes involved in the formation of a volcanic crater. The materials, demonstration setup, safety procedures, and applications to instruction are presented. (Author/WB)

  17. Near infrared detection of ammonium minerals.

    USGS Publications Warehouse

    Krohn, M.D.; Altaner, S.P.

    1987-01-01

    Diagnostic near-infrared spectral features have been identified for minerals with ammonium (NH4+) bound in the crystal structure. Near-infrared detection of NH4-bearing minerals may provide useful information for prospecting for certain ore deposits and may provide a better understanding of the nitrogen cycle within geologic environments.-from Authors

  18. 21 CFR 573.170 - Ammonium formate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) The additive is manufactured by the reaction of 99.5 percent ammonia gas and 99 percent formic acid in a continuous loop reactor to produce a solution made up of 37 percent ammonium salt of formic acid and 62 percent formic acid. (b) The additive is used or intended for use as a feed acidifying...

  19. MECHANISM BY WHICH AMMONIUM FERTILIZERS KILL LARKSPUR

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Environmental concerns of using pesticides on public lands have greatly reduced the use of herbicides to control tall larkspur (Delphinium barbeyi). Alternative methods of control have used ammonium sulfate placed in the crown of individual plants to kill larkspur. The objective of this study was ...

  20. 76 FR 47238 - Ammonium Nitrate From Russia

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-04

    ...)). Background The Commission instituted this review on March 1, 2011 (76 FR 11273) and determined on June 6, 2011 that it would conduct an expedited review (76 FR 34749, June 14, 2011). The Commission transmitted... COMMISSION Ammonium Nitrate From Russia Determination On the basis of the record \\1\\ developed in the...

  1. 21 CFR 184.1139 - Ammonium hydroxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 20, which is incorporated by reference. Copies are... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium hydroxide. 184.1139 Section 184.1139 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  2. 21 CFR 184.1135 - Ammonium bicarbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... ingredient meets the specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 19, which is incorporated... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium bicarbonate. 184.1135 Section 184.1135 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED)...

  3. Synthesis, characterization, and self-assembly with plasmid DNA of a quaternary ammonium derivative of pectic galactan and its fluorescent labeling for bioimaging applications.

    PubMed

    Chintakunta, Ramesh; Buaron, Nitsa; Kahn, Nicole; Moriah, Amana; Lifshiz, Rinat; Goldbart, Riki; Traitel, Tamar; Tyler, Betty; Brem, Henry; Kost, Joseph

    2016-10-01

    Quaternized derivatives of pectic galactan (QPG) were synthesized by a reaction of pectic galactan (PG) with 3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CHPTAC) in the presence of aqueous sodium hydroxide solution under mild reaction conditions. The results showed that the concentration of CHPTAC and NaOH has great impact on the quaternization reaction. QPG was found to interact electrostatically with plasmid DNA in aqueous solution to form complexes in globular condensed morphology in a nanometer scale size ranging from 60 to 160nm. Complexes formed with QPG fluorescently labeled with 5-DTAF (QPG-5-DTAF) were introduced to the C6 rat glioma cell line, and were found to be able to enter the cell and approach the nucleus within 24h. The results suggest that this type of modified natural polysaccharide may have an advantage as a biocompatible and biodegradable gene delivery carrier and furthermore may serve as a cell specific carrier. PMID:27312642

  4. 40 CFR 721.4095 - Quaternary ammonium alkyltherpropyl trialkylamine halides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... trialkylamine halides. 721.4095 Section 721.4095 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.4095 Quaternary ammonium alkyltherpropyl trialkylamine halides. (a... generically as quaternary ammonium alkyltherpropyl trialkylamine halides (PMNs...

  5. 21 CFR 184.1296 - Ferric ammonium citrate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) ammonium citrate, CAS Reg. No. 1332-98-5) is a complex salt of undetermined structure composed of 16.5 to... (iron (III) ammonium citrate, CAS Reg. No. 1333-00-2) is a complex salt of undetermined...

  6. Photocatalytic degration kinetics in Rhodamine B dye degradation with poriferous TiO2 photocatalyst

    NASA Astrophysics Data System (ADS)

    Wang, Zheng-Ping; Jiao, Cai-Shan; Chen, Xing-Juan

    2006-06-01

    A type of poriferous TiO2 material was prepared using cetyl trimethyl ammonium bromide as a template agent and butyl tetra titanate as a precursor. Through studying the photocatalytic kinetic activity of Rhodamine B photocatalytic degradation reaction with a UV-1601PC ultraviolet-visible spectrophotometer, the photocatalytic degradation process of Rhodamine B was found to not correspond to the first-order kinetic process completely. According to the reaction phenomenon, the photocatalytic degradation process of Rhodamine B with poriferous TiO2 involved two irrevesible reactions. The kinetic model was tested using experimental data.

  7. 21 CFR 184.1141a - Ammonium phosphate, monobasic.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium phosphate, monobasic. 184.1141a Section... SAFE Listing of Specific Substances Affirmed as GRAS § 184.1141a Ammonium phosphate, monobasic. (a) Ammonium phosphate, monobasic (NH4H2PO4, CAS Reg. No. 7722-76-1) is manufactured by reacting ammonia...

  8. 21 CFR 184.1141a - Ammonium phosphate, monobasic.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium phosphate, monobasic. 184.1141a Section... SAFE Listing of Specific Substances Affirmed as GRAS § 184.1141a Ammonium phosphate, monobasic. (a) Ammonium phosphate, monobasic (NH4H2PO4, CAS Reg. No. 7722-76-1) is manufactured by reacting ammonia...

  9. 21 CFR 582.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Aluminum ammonium sulfate. 582.1127 Section 582.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions...

  10. 21 CFR 182.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Aluminum ammonium sulfate. 182.1127 Section 182.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate....

  11. 21 CFR 582.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Aluminum ammonium sulfate. 582.1127 Section 582.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions...

  12. 21 CFR 182.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Aluminum ammonium sulfate. 182.1127 Section 182.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate....

  13. 21 CFR 582.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Aluminum ammonium sulfate. 582.1127 Section 582.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions...

  14. 21 CFR 182.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Aluminum ammonium sulfate. 182.1127 Section 182.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate....

  15. 21 CFR 182.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Aluminum ammonium sulfate. 182.1127 Section 182...) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Multiple Purpose GRAS Food Substances § 182.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions of use. This substance is...

  16. 21 CFR 582.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Aluminum ammonium sulfate. 582.1127 Section 582.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions...

  17. 21 CFR 582.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Aluminum ammonium sulfate. 582.1127 Section 582.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions...

  18. 21 CFR 182.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Aluminum ammonium sulfate. 182.1127 Section 182.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate....

  19. 21 CFR 73.1025 - Ferric ammonium citrate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Ferric ammonium citrate. 73.1025 Section 73.1025 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1025 Ferric ammonium citrate. (a) Identity. The color additive ferric ammonium...

  20. 40 CFR 721.10099 - Dialkyl dimethyl ammonium carbonate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dialkyl dimethyl ammonium carbonate... Specific Chemical Substances § 721.10099 Dialkyl dimethyl ammonium carbonate (generic). (a) Chemical... as dialkyl dimethyl ammonium carbonate (1:1) (PMN P-03-715) is subject to reporting under...

  1. 40 CFR 721.10302 - Zinc ammonium phosphate (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Zinc ammonium phosphate (generic). 721... Substances § 721.10302 Zinc ammonium phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as zinc ammonium phosphate (PMN...

  2. 40 CFR 721.10302 - Zinc ammonium phosphate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Zinc ammonium phosphate (generic). 721... Substances § 721.10302 Zinc ammonium phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as zinc ammonium phosphate (PMN...

  3. 40 CFR 721.10302 - Zinc ammonium phosphate (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Zinc ammonium phosphate (generic). 721... Substances § 721.10302 Zinc ammonium phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as zinc ammonium phosphate (PMN...

  4. 40 CFR 721.10591 - Tertiary ammonium compound (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Tertiary ammonium compound (generic... Specific Chemical Substances § 721.10591 Tertiary ammonium compound (generic). (a) Chemical substance and... ammonium compound (PMN P-11-110) is subject to reporting under this section for the significant new...

  5. 40 CFR 721.10591 - Tertiary ammonium compound (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tertiary ammonium compound (generic... Specific Chemical Substances § 721.10591 Tertiary ammonium compound (generic). (a) Chemical substance and... ammonium compound (PMN P-11-110) is subject to reporting under this section for the significant new...

  6. 40 CFR 721.10582 - Quaternary ammonium compound (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Quaternary ammonium compound (generic... Specific Chemical Substances § 721.10582 Quaternary ammonium compound (generic). (a) Chemical substance and... ammonium compound (PMN P-10-571) is subject to reporting under this section for the significant new...

  7. 40 CFR 721.10582 - Quaternary ammonium compound (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Quaternary ammonium compound (generic... Specific Chemical Substances § 721.10582 Quaternary ammonium compound (generic). (a) Chemical substance and... ammonium compound (PMN P-10-571) is subject to reporting under this section for the significant new...

  8. 21 CFR 172.430 - Iron ammonium citrate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Iron ammonium citrate. 172.430 Section 172.430... ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Anticaking Agents § 172.430 Iron ammonium citrate. Iron ammonium citrate may be safely used in food in accordance with the...

  9. 40 CFR 721.10430 - Tetra alkyl ammonium salt (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tetra alkyl ammonium salt (generic... Specific Chemical Substances § 721.10430 Tetra alkyl ammonium salt (generic). (a) Chemical substance and... ammonium salt (PMN P-97-823) is subject to reporting under this section for the significant new...

  10. 40 CFR 721.10430 - Tetra alkyl ammonium salt (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Tetra alkyl ammonium salt (generic... Specific Chemical Substances § 721.10430 Tetra alkyl ammonium salt (generic). (a) Chemical substance and... ammonium salt (PMN P-97-823) is subject to reporting under this section for the significant new...